Deslizamientos epifisarios femorales proximales >30º. Procedimiento de Dunn modificado. Evaluación anatómica y funcional en una cohorte retrospectiva. [Slipped capital femoral epiphysis >30º. Modified Dunn procedure. Anatomical and functional evaluation in a retrospective cohort

Directory of Open Access Journals (Sweden)

Francisco Praglia

2013-12-01

Full Text Available Introducción La deformidad residual resultante de un deslizamiento epifisario femoral proximal moderado o grave conduce a osteoartritis prematura debida al choque femoroacetabular. Los objetivos del trabajo fueron evaluar la mejoría de la anatomía del fémur proximal y evaluar la función de la cadera en pacientes con deslizamiento epifisario femoral proximal >30 grados tratados con el procedimiento de Dunn modificado, a corto plazo. Material y Métodos Cohorte retrospectiva de pacientes con deslizamiento epifisario femoral proximal >30 grados, tratados con luxación controlada de cadera y el procedimiento de Dunn modificado. Se evaluaron mediciones clínicas y radiológicas preoperatorias y posoperatorias, hallazgos intraoperatorios y funcionalidad con los puntajes de Harris y de D’aubigne-Postel. Resultados Trece casos, mediana de edad 12 años y mediana de seguimiento 14 meses. El ángulo de deslizamiento de Southwick preoperatorio (75 grados, ri 67-85 y posoperatorio (10 grados, ri 5-17 mostró una disminución estadísticamente significativa (p <0,001. El offset radio cabeza-cuello preoperatorio (-0,13 versus el posoperatorio (0,12 obtuvo una mejoría significativa (p 0,002. El 69,2% de los pacientes presentó daño de alguna estructura intraarticular. Los puntajes promedio de funcionalidad fueron 14,6 (muy buena mejoría y 83,4 (bueno. Complicaciones: necrosis avascular 15,3% y condrólisis 15,3%. Conclusion Esta técnica restaura la anatomía del fémur proximal y la funcionalidad de la cadera a corto plazo. aunque no disponemos de resultados a largo plazo, al menos en teoría, serían buenos. Sin embargo, la luxación controlada con Dunn modificado no está exenta de complicaciones y el riesgo de necrosis avascular y condrólisis persiste.

Optical properties of BaO added bioactive Na2O-CaO-P2O5 glasses

Science.gov (United States)

Edathazhe, Akhila B.; Shashikala, H. D.

2018-04-01

This paper deals with the effect of BaO addition on the optical properties of bioactive Na2O-CaO-P2O5 glasses for biomedical optics applications. The phosphate glasses with composition (26-x)Na2O-xBaO-29CaO-45P2O5 (x = 0, 5, 10, 15 mol%) have been prepared by melt-quenching technique at 1100°C. The refractive index of glasses increased with BaO content. The optical band gap and Urbach energy of synthesized glasses were derived from the optical absorption spectra by using UV-Visible spectrometer. The addition of 5 mol% of BaO increased the band gap energy of glasses due to the formation of ionic cross-links in the glass structure. The defect and interstitial bonds formation in theglasses decreased with BaO additions as indicated by reductions in the Urbach energy values. No such variations in the band gap and Urbach energy values of glasses were observed with BaO content from 5 to 15 mol%. The molar and oxide ion polarizability values were calculated from the band gap and molar volume of glasses. The increase in the calculated optical basicity and metallization criteria of glasses supported the rise in band gap energy values with BaO additions. As the melting temperature of glasses decreased from 1200 to 1100°C, the refractive index increased as supported by the measured density values. The band gap energy is not changed with melting temperature. The Urbach energy decreased with decrease in melting temperature in case of BaO-free Na2O-CaO-P2O5 glasses, whereas it increased in case of BaO added glasses due to the role of BaO as modifying oxide.

Hidroxilación de fenol con catalizadores ZSM-5 modificado con cobre

Directory of Open Access Journals (Sweden)

César Augusto Caro

2005-01-01

Full Text Available Se sintetizaron varios catalizadores Cu-ZSM-5 con diferentes relaciones Si/Al y Si/Cu. Usando metilamina o hidróxido de sodio como agente mineralizante. Los catalizadores se caracterizaron por DRX, IR, análisis BET, UV-VIS y análisis elemental. El desempeño catalítico de los catalizadores sintetizados se evaluó en la hidroxilación de fenol con H2O2. Se encontró que la relación catecol (CAT/(hidroquinona (HQ + p-benzoquinona (PBQ aumentó con el contenido de agua, presentó un máximo cuando la relación en peso de agua/fenol fue de 53/1 y se favoreció a altas temperaturas, con el aumento del contenido de aluminio o con la disminución en el contenido de catalizador. El contenido de cobre no fue un factor determinante para la conversión ni para la selectividad en la hidroxilación de fenol. La producción de la p-benzoquinona (PBQ, producto de oxidación de la hidroquinona, fue mínimo cuando se usaron las siguientes condiciones: 80 ºC, fenol: 1 mmol, relación molar fenol/H2O2 de 3/1, catalizador: 20 mg, agua: 5 g, tiempo de reacción: 4 h.

Application of neutron activation analysis to control P2O5 content in ore and ore concentrates of ''Apatit'' works

International Nuclear Information System (INIS)

Belyakov, M.A.; Terent'eV, Eh.P.; Frolov, V.A.

1982-01-01

A technique for a neutron activation rapid analysis of fluorine is described. A mean-square error of the analysis makes up 0,g3 per cent F. The investigation has been carried out and a close correlation has been established for the Hibine massif exploited apatite deposits on the basis of the neutron activation analysis of fluorine and chemical analysis of P 2 O 5 . Possibilities are shown of using the neutron activation analysis of P 2 O 5 in ores and certain ore con-- centrates of ''Apatit'' works from the radioactivity induced in fluorine. A mean-square error of the analysis makes up 0,35 per cent P 2 O 5

Thermo-physical, structural and microstructural properties of glasses containing V2O5 and P2O5

International Nuclear Information System (INIS)

Sharma, K.; Kothiyal, G.P.; Montagne, L.; Méar, F.O.; Revel, B.

2012-01-01

A number of glass systems belonging to BaO-CaO-SiO 2 have been studied as prospective sealing materials for solid oxide fuel cell (SOFC). These materials should provide good bonding with cell components and satisfy the requirements for high temperature applications related to thermal expansion coefficient (TEC), reactivity at interfaces, mechanical integrity etc. The thermo- physical and sealing characteristics of glasses can be controlled by controlling the crystallization, therefore different nucleating agents such as NiO, P 2 O 5 etc is used, however, addition of P 2 O 5 may lead to increase in the sealing characteristics of glasses as it scavenges the modifier from the glass matrix

Queratinocitos derivados de piel humana modificados por el vector retroviral FOCH 29-NeoR

Directory of Open Access Journals (Sweden)

Luz Marina Restrepo

2000-02-01

Full Text Available <p class="MsoNormal">5pt; font-family: Arial">En este protocolo se evaluará la eficiencia de la transducción mediada por el vector retroviral FOCH 29-NeoR derivado del virus de Friend; éste ha mostrado una alta eficiencia en la transducción, tanto de células madres hematopoyéticas como de otras líneas celulares. Se medirá su eficiencia de transducción en cultivos primarios de queratinocitos, derivados de biopsias de piel humana o de sobrantes de procedimientos quirúrgicos como circuncisiones, mastectomías y cirugía cosmética de pacientes que consultan el Hospital Universitario San Vicente de Paul, Hospital la María, la Clínica del Rosario y la Clínica León XIII.p> <p class="MsoNormal">5pt; font-family: Arial">Las muestras de piel se procesarán en un lapso no superior a 12 horas, se eliminará el exceso de dermis y tejido conectivo por digestión con dispasa (0.6-2.4 U/ml a 375pt; font-family: Symbol">°5pt; font-family: Arial">C durante 1 hora. Las muestras serán lavadas con PBS, antibiótico (penicilina + estreptomicina y se cortarán en fragmentos de 1-2 mm; después de 2-3 horas de digestión con tripsina-EDTA (0.25% las células serán resuspendidas en KGM (Medio de crecimiento para queratinocitos y se sembrarán a una concentración de 105pt; font-family: Arial">5 5pt; font-family: Arial">- 3x105pt; font-family: Arial">5 5pt; font-family: Arial">células por plato de 100 mm; se incubarán a 375pt; font-family: Symbol">°5pt; font-family: Arial">C, 5% CO5pt; font-family: Arial">2 5pt; font-family: Arial">con cambios de medio 2-3 veces por semana. Se harán subcultivos con el fin de expandirlos y congelar una parte de las

Effect of B2O3 and P2O5 on fluorosilicic mica glass-ceramic sintering process

Directory of Open Access Journals (Sweden)

Wu S.

2010-01-01

Full Text Available To study the effect of B2O3 and P2O5 on fluorosilicic mica glass-ceramic sintering process, six sets of K2O-MgO-SiO2-F glasses were prepared by using B2O3 and P2O5 as sintering aid, respectively. Green bodies of the glass powder were formed by gel casting and sintered at 800, 850, 900, 950, 1000oC for 6 hours, resectively. The sintering and crystallization behavior were studied by thermal shrinkage , X-ray diffraction and SEM. The results showed that the shrinkage rate of the glass with 2wt% B2O3 and P2O5 was highest, while the rate of the glass with 5wt% P2O5 was lowest. An additional crystal other than fluorosilicic mica was precipitated in the glass ceramics generated by sintering of glass powder. The present results confirmed that the glass powder of pure K2O-MgO-SiO2-Fsystem had poor sinterability, while glass powder with minor addition of P2O5 and/or B2O3 showed good sinterability. This result was also verified by SEM.

EPR Structural Investigations on Ag2O-B2O3-CaO-P2O5 Vitreous System

Directory of Open Access Journals (Sweden)

Razvan Stefan

2011-10-01

Full Text Available Glass samples from vitreous system 1.5Ag2O98.5%[0.47B2O3(0.53-xCaOxP2O5] with 0  x  0.08 have been obtained by undercooled method. The magnetic species existing in glass powders have been highlighting by mean of electronic paramagnetic resonance (EPR. The resonance linewidth analysis reveal the interactions between magnetic ions.

Aleaciones con memoria de forma, una filosofía diferente en la ingeniería y el diseño con materias

OpenAIRE

Peña Andrés, Fco. Javier

2002-01-01

Los materiales con memoria de forma también llamados materiales inteligentes poseen propiedades que los diferencian del resto de materiales. Estas propiedades no son propiedades mejoradas respecto a los materiales convencionales, sino que son nuevas propiedades que hacen que el proceso de diseño con materiales haya de ser modificado. La comprensión de estas nuevas propiedades y la estandarización de todos los parámetros que las caracterizan por parte de todas aquellas personas involucradas en...

Sol–gel hybrid membranes loaded with meso/macroporous SiO{sub 2}, TiO{sub 2}–P{sub 2}O{sub 5} and SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5} materials with high proton conductivity

Energy Technology Data Exchange (ETDEWEB)

Castro, Yolanda, E-mail: castro@icv.csic.es [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Mosa, Jadra, E-mail: jmosa@icv.csic.es [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Aparicio, Mario [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Pérez-Carrillo, Lourdes A.; Vílchez, Susana; Esquena, Jordi [Instituto de Química Avanzada de Cataluña, Consejo Superior de Investigaciones Científicas (IQAC-CSIC), CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Jordi Girona 18-26, 08034 Barcelona (Spain); Durán, Alicia [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain)

2015-01-15

In this work, highly conductive hybrid organic–inorganic membranes loaded with SiO{sub 2}, TiO{sub 2}–P{sub 2}O{sub 5} and SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5} meso/macroporous particles were prepared via a sol–gel process. Meso/macroporous particles were incorporated to hybrid membranes, for improving water retention and enhancing electrochemical performance. These particles with a polymodal pore size distribution were prepared by templating in highly concentrated emulsions, the particles showed a specific surface area between 50 m{sup 2}/g (TiO{sub 2}–P{sub 2}O{sub 5}) and 300 m{sup 2}/g (SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5}). The particles were dispersed in a hybrid silica sol and further sprayed onto glass paper. The films were polymerized and sintered; those loaded with meso/macroporous particles had a homogenous distribution. High temperature proton conductivity measurements confirmed a high water retention. Conductivity of these materials is higher than that of Nafion{sup ®} at higher temperatures (120 °C) (2·10{sup −2} S/cm). This study provides processing guideline to achieve hybrid electrolytes for efficient conduction of protons due to their high surface area and porous structure. - Highlights: • Hybrid electrolyte with meso/macroporous particles were synthesized by sol–gel. • Depositions of hybrid solutions by spraying onto glass substrates were performed. • Proton conductivity was evaluated as a function of composition and porous structure.

Glass formation and properties of glasses in V/sub 2/O/sub 5/-B/sub 2/O/sub 3/-P/sub 2/O/sub 5/ system

Energy Technology Data Exchange (ETDEWEB)

Sedmale, G P; Vajvad, Ya A; Arkhipova, S E; Laukmanis, L A

1987-01-01

The glass formation in the system V/sub 2/O/sub 5/-B/sub 2/O/sub 3/-P/sub 2/O/sub 5/ and the properties of the obtained glasses have been studied by methods including that of the mathematical design and the treatment of the obtained data on ECM. The glass formation region is limited by the molar content of V/sub 2/O/sub 5/ 30-80%, B/sub 2/O/sub 3/ 0-45%, P/sub 2/O/sub 5/ 20-65%. The chemical stability data show that at the molar content of V/sub 2/O/sub 5/ 45-50% the transfer of vanadium from the state of the modificator to the glass-forming agent takes place. For the studied glasses the electron mechanism of conductivity is the dominating one.

Investigation of 70SiO2-15CaO-10P2O5-5Na2O Glass Composition for Bone Regeneration Applications

Directory of Open Access Journals (Sweden)

Vikas Anand

2014-11-01

Full Text Available Glass with the composition 70SiO2-15CaO -10P2O5-5Na2O has been prepared by using sol gel technique. Bioactive behavior of the glass sample has been checked by in vitro study using TRIS simulated body fluid. Bioactive properties of the sample has been analyzed by using XRD, Raman, FE-SEM, EDX and Brunauer Emmett Teller studies. pH study has been conducted to check the non- acidic nature of the glass sample. Drug delivery behavior of the sample has been estimated by using gentamicin as an antibiotic. Reported sample has been found to be potential candidate for bone regeneration applications.

Características físico-químicas e utilização em alimentos de amidos modificados por tratamento oxidativo Obtention, physicochemical characterization and applications in foods of starches modified by oxidative treatment

Directory of Open Access Journals (Sweden)

Marianne Ayumi Shirai

2007-06-01

Full Text Available A utilização de amidos modificados em alimentos tem sido uma alternativa para melhorar as características que os amidos nativos não podem conferir. Os objetivos deste trabalho foram: avaliar características físico-químicas de amidos modificados com peróxido de hidrogênio, utilizar os amidos obtidos para a elaboração de doce de leite e bala de goma americana e verificar a aceitação sensorial destes produtos. Para obtenção das amostras modificadas, os amidos foram suspensos em solução de Fe2SO4.7H2O 0,01% e, em seguida, adicionou-se peróxido de hidrogênio 1,25%, ajustou-se o pH para 3,0, deixou-se reagir a 45 °C/15 minutos, lavou-se e secou-se a amostra em estufa de ventilação forçada a 45 °C/24 horas. Os amidos modificados apresentaram maior expansão, conteúdo de carboxilas, poder redutor e susceptibilidade à sinérese. Em relação à viscosidade aparente, verificou-se que com a modificação química houve diminuição no pico de viscosidade, especialmente quando as amostras foram analisadas em pH 7,0. A análise sensorial do doce de leite revelou que houve preferência pelas amostras elaboradas com amido de mandioquinha-salsa modificado e com o amido de milho regular ácido-modificado. A bala de goma produzida com amido de mandioquinha-salsa modificado ocupou o segundo lugar entre a preferência dos julgadores.The use of modified starches in foods is made to improve characteristics that the native cannot confer. The objective of this work was to evaluate physicochemical characteristics of starches from several botanical sources after chemical modification with H2O2 considering technological properties of interest to the food industry. The modified starches were used in dulce de leche and starch gum and the sensorial acceptance of these products was verified. The chemical treatment included the suspension of the native starches in a 0.01% Fe2SO4, followed by addition of 1.25% H2O2 at pH 3.0 and reaction time of 15 min

FT-IR and thermoluminescence investigation of P2O5-BaO-K2O glass system

Science.gov (United States)

Ivascu, C.; Timar-Gabor, A.; Cozar, O.

2013-11-01

The 0.5P2O5ṡxBaOṡ(0.5-x)K2O glass system (0≤x≤0.5mol%) is investigated by FT-IR and thermoluminescence as a possible dosimetic material. FT-IR spectra show structural network modifications with the composition variations of the studied glasses. The predominant absorption bands are characterized by two broad peaks near 500 cm-1, two weak peaks around 740 cm-1 and three peaks in the 900-1270 cm-1 region. The shift in the position of the band assigned to asymmetric stretching of PO2- group, υas(PO2-) modes from ˜1100 cm-1 to 1085 cm-1 and the decrease in its relative intensity with the increasing of K2O content shows a network modifier role of this oxide.. Luminescence investigations show that by adding modifier oxides in the phosphate glass a dose dependent TL signals result upon irradiation. Thus P2O5-BaO-K2O glass system is a possible candidate material for dosimetry in the dose 0 - 50 Gy range.

Bioactivity of gel-glass powders in the CaO-SiO2 system: a comparison with ternary (CaO-P2O5-SiO2) and quaternary glasses (SiO2-CaO-P2O5-Na2O).

Science.gov (United States)

Saravanapavan, Priya; Jones, Julian R; Pryce, Russell S; Hench, Larry L

2003-07-01

Bioactive glasses react chemically with body fluids in a manner that is compatible with the repair processes of the tissues. This results in the formation of an interfacial bond between the glasses and living tissue. Bioactive glasses also stimulate bone-cell proliferation. This behavior is dependent on the chemical composition as well as the surface texture of the glasses. It has been recently reported that gel-derived monolith specimens in the binary SiO2 - CaO are bioactive over a similar molar range of SiO2 content as the previously studied ternary CaO-P2O5-SiO2 system. In this report, the preparation and bioactivity of the binary gel-glass powder with 70 mol % SiO2 is discussed and its bioactivity is compared with the melt-derived 45S5 (quaternary) Bioglass and sol-gel-derived 58S (ternary) bioactive gel-glass compositions. Dissolution kinetic parameters K(1) and K(2) were also computed based on the silicon release for all glass powders. It was shown that the simple two-component SiO2-CaO gel-glass powder is bioactive with comparable dissolution rates as the clinically used melt-derived 45S5 Bioglass powder and extensively studied sol-gel-derived 58S gel-glass powder. Copyright 2003 Wiley Periodicals, Inc.

Electrical resistivity surface for FeO-Fe2O3-P2O5 glasses

Science.gov (United States)

Vaughan, J. G.; Kinser, D. L.

1975-01-01

The dc electrical properties and microstructure of x(FeO-Fe2O3)-(100-x)P2O5 glasses were investigated up to a maximum of x = 75 mol %. Results indicate that, in general, the minimum resistivity of the glass does not occur at equal Fe(2+) and Fe(3+) concentrations, although for the special case where x = 55 mol % the minimum does occur at Fe(2+)/Fe total = 0.5, as reported by other investigators. Evidence presented shows that the position of the minimum resistivity is a function of total iron content. The minimum shifts to glasses richer in Fe(2+) at higher total iron concentrations.

Synthesis and characterization of 64SiO2-26CaO-5P2O5-5CuO bioactive composition for the growth of hydroxyapatite layer by XRD, Raman and pH studies

Science.gov (United States)

Kaur, Pardeep; Singh, K. J.

2016-05-01

Bioactive sample with the nominal composition of 64SiO2-26CaO-5P2O5-5CuO has been prepared in the laboratory by using the sol-gel technique. The bioactivity of the prepared sample has been analyzed by using the Tris Simulated Body Fluid which has also been prepared in the laboratory. XRD and Raman techniques have been employedto probe the formation of hydroxyapatite layer. pH studies has also been undertaken to check the acidic/non-acidic behavior of sample. Growth of hydroxyapatite layer has been observed after one day on the surface of the sample. Moreover, sample has been observed to be non-acidic in nature.

Structural and electrical conductivity studies on the solid electrolyte system {sub x}Li2O-(100-x) [0.5B{sub 2}O{sub 3}-0.5 P{sub 2}O{sub 5}] where 20

Energy Technology Data Exchange (ETDEWEB)

Padmasree, K. P.; Diaz-Guillen, M. R.; Diaz-Guillen, J. A.; Mendoza, E. M.; Fuentes, A. F. [Cinvestav, unidad Saltillo, Ramos Arizpe, Coahuila (Mexico)]. E-mail: padma512@yahoo.com

2009-09-15

Lithium ion conducting glasses have been extensively investigated due to their potential application as solid state amorphous electrolytes in lithium rechargeable batteries. The use of glassy electrolytes in all solid state devices may provide numerous advantages like increased safety, facility of fabrication and miniaturization and having a higher conductivity than those of the crystalline counterparts. In this work, we prepared and studied the Lithium ion conducting glassy solid electrolytes of the composition {sub x}Li{sub 2}O-(1-x)[0.5B{sub 2}O{sub 3} -0.5P{sub 2}O{sub 5}] where 202}O. [Spanish] Los vidrios conductores de ion litio se han investigado ampliamente por su aplicacion potencial como electrolitos amorfos de estado solido en baterias recargables de litio. El uso de electrolitos vitreos en todos los dispositivos de estado solido puede proporcionar numerosas ventajas como mayor seguridad, facilidad de fabricacion y miniaturizacion, asi como tener una conductividad mas alta que la de sus contrapartes cristalinas. En este trabajo, se prepararon y estudiaron los electrolitos solidos vitreos conductores de ion litio de la composicion {sub x}Li2O-(1-x)[0.5B{sub 2}O{sub 3} -0.5P{sub 2}O{sub 5}] donde 20

Efeitos do tratamento termico UHT em um leite modificado

OpenAIRE

Juan Manuel Valdivia Velasquez

1992-01-01

Resumo: Fizeram-se formulações de leite modificado, a partir de leite integral de vaca, com a diluição do mesmo com água potável. Tentou-se aproximar a composição do leite modificado ao do um leite humano, principalmente no que refere aos componentes principais: (proteína, gordura e lactose), algumas vitaminas (A, B1, B2 e C) e alguns minerais (ferro, zinco e potássio). 0 uso de fórmulas sugeridas na presente pesquisa, utilizando os dados das análises rápidas rotineiras de planta de laticínio...

Study on crystallization kinetics and phase evolution in Li2O-Al2O3-GeO2-P2O5 glass-ceramics system

Science.gov (United States)

Das, Anurup; Dixit, Anupam; Goswami, Madhumita; Mythili, R.; Hajra, R. N.

2018-04-01

To address the safety issues related to liquid electrolyte and improve the battery performance, Solid State Electrolytes (SSEs) are now in frontier area of research interest. We report here synthesis of Li-SSE based on Li2O-Al2O3-GeO2-P2O5 (LAGP) system with NASICON structure. Glass sample with nominal composition Li1.5Al0.5Ge1.5P2.5Si0.5O12 was prepared by melt-quenching technique. Non-isothermal crystallization kinetics was studied using DSC and activation energy of crystallisation was calculated to be ˜ 246 kJ/mol using Kissinger's equation. XRD of heat treated samples show the formation of required LiGe2(PO4)3 phase along with other minor phases. Compositional analysis using SEM-EDX confirms enrichment of Ge and Si along the grain boundaries.

Evaluación de la resistencia a la corrosión erosión de recubrimientos de níquel modificados con nanopartículas de diamante

Directory of Open Access Journals (Sweden)

Luz Amira Torres Medina

2010-01-01

Full Text Available La incorporación de nanopartículas de carburos, nitruros, óxidos o diamante en una matriz metálica, generalmente muestran mejoras en la dureza, en la resistencia al desgaste y a la corrosión, comparado con un recubrimiento del metal puro. Estos recubrimientos compuestos se pueden obtener mediante la técnica de electrodeposición, logrando economía y calidad en los depósitos. Los recubrimientos de níquel modificados con nanopartículas de diamante (Ni-D, fueron aplicados sobre un acero AISI SAE 1016 mediante la técnica de electrodeposición desde una solución típica Watts sin aditivos, que contiene nanopartículas de diamante. El efecto que ejercen algunas variables que intervienen en el proceso de electrodeposición como: densidad de corriente, velocidad de agitación y concentración de partículas en el baño, en la dureza y en la resistencia a la corrosión-erosión, se estudiaron mediante un diseño factorial completamente aleatorizado 2k. La resistencia a la corrosión- erosión se evaluó mediante el monitoreo del potencial de corrosión de las probetas con recubrimiento sometidas a un fluido corrosivo y abrasivo en movimiento. Los recubrimientos compuestos de Ni-D obtenidos presentan mejor resistencia a la corrosión-erosión que los recubrimientos de níquel puro. Los recubrimientos más resistentes a la corrosión-erosión fueron los obtenidos a 5 A/dm², 900 rpm y 10 g/L de diamante.

Comportamiento de tejas de cubierta tipo multicapa fabricadas con asfalto crudo y modificado cuando son sometidas a cargas constantes

OpenAIRE

López Bula, Pedro Javier

2011-01-01

El presente trabajo, analiza las propiedades viscoelasticas de diferentes materiales asfalticos después de ser sometidos a cargas permanentes y a diferente temperatura -- Estas cargas simulan las que eventualmente se pueden presentar en la aplicacion y fabricación de productos asfalticos ampliamente utilizados en el sector de la construcción -- Para este estudio se utilizó asfalto crudo y modificado con diferentes polímeros: Cera de polietileno (CERA), caucho molido de llanta (CR), copolimero...

Dynamics of Li+ ions in Li2O-TeO2-P2O5 glasses

Science.gov (United States)

Chatterjee, A.; Ghosh, A.

2018-04-01

In the present work we have studied transport properties of lithium ions in 0.3Li2O-0.7[xTeO2-(1-x)P2O5] glasses, where x=0.5, 0.6, 0.7. We have measured acconductivity for a wide range offrequency and temperature. The real part of the conductivity spectra has been analyzed by the power law in Almond-West formalism. The dc conductivity has been obtained from the complex impedance plots. We have found that dc conductivity increases and activation energy decreases on increase of TeO2 for a particular Li2O content. We have also found that the dc conductivity and crossover frequency obey Arrhenius relation. The time temperature superposition has been verified using the scaling formalism of the conductivity spectra. We have found that the conductivity isotherms scaled to a single master curve with suitable scaling parameters for a particular composition at different temperatures. However the scaling to a single master curve fails for different compositions at a particular temperature.

Investigation of the system ThO2-NpO2-P2O5. Solid solutions of thorium-neptunium (IV) phosphate-diphosphate

International Nuclear Information System (INIS)

Dacheux, N.; Thomas, A.C.; Brandel, V.; Genet, M.

1998-01-01

Considering that phosphate matrices could be potential candidates for the immobilization of actinides or for the final disposal of the excess plutonium from dismantled nuclear weapons, the chemistry of thorium phosphates has been re-examined. In the ThO 2 -P 2 O 5 system, the thorium phosphate-diphosphate Th 4 (PO 4 ) 4 P 2 O 7 (TPD) can be synthesized by wet and dry chemical processes. The substitution of thorium by other tetravalent actinides like uranium or plutonium can be obtained for 0 4-x Np x (PO 4 ) 4 P 2 O 7 (TNPD) with 0 4+ by Np 4+ in the TPD structure is evaluated to 2.08 (which corresponds to about 52 mol% of thorium replaced by neptunium (IV)). The field of existence of solid solutions Th 4-x U -x Np -x Pu U x U Np x Np Pu x Pu (PO 4 )4P 2 O 7 has been calculated. These solid solutions should be synthesized for 5x U +7x Np +9x Pu ≤15. In the NpO 2 -P 2 O 5 system, the unit cell parameters of Np 2 O(PO 4 ) 2 were refined by analogy with U 2 O(PO 4 ) 2 which crystallographic data have been published recently. For Np 2 O(PO 4 ) 2 the unit cell is orthorhombic with the following cell parameters: a=7.033(2)A, b=9.024(3)A, c=12.587(6)A and V=799(1)A 3 . The unit cell parameter obtained for α-NpP 2 O 7 (a=8.586(1)A) is in good agreement with those already reported in literature. (orig.)

The influence of SiO2 Addition on 2MgO-Al2O3-3.3P2O5 Glass

DEFF Research Database (Denmark)

Larsen, P.H.; Poulsen, F.W.; Berg, Rolf W.

1999-01-01

2MgO-Al2O3-3.3P2O5 glasses with increasing amounts of SiO2 are considered for sealing applications in Solid Oxide Fuel Cells (SOFC). The change in chemical durability under SOFC anode conditions and the linear thermal expansion is measured as functions of the SiO2 concentration. Raman spectroscopy...... analysis of the glasses reveals no sign of important changes in the glass structure upon SiO2 addition. Some increase in glass durability with SiO2 concentration is reported and its cause is discussed....

Método modificado de muestreo por conglomerados para la evaluación rápida de necesidades después de un desastre

Directory of Open Access Journals (Sweden)

Malilay J.

1997-01-01

Full Text Available El método de muestreo por conglomerados puede utilizarse para llevar a cabo la evaluación rápida de las necesidades de salud y de otro tipo en comunidades afectadas por desastres naturales. El método, que se basa en el modelo usado por el Programa Ampliado de Inmunización de la OMS para estimar la cobertura con vacunación, ha sido modificado para que proporcione 1 estimaciones de la población que queda en una zona determinada y 2 estimaciones del número de personas con necesidades específicas en la zona que ha sido afectada por un desastre. Este enfoque difiere del que se ha usado anteriormente a raíz de otros desastres en que las evaluaciones rápidas de las necesidades solo han consistido en estimar la proporción de la población con necesidades específicas. Aquí se propone un diseño de encuesta modificado que se basa en el uso de n x k para calcular la población restante, la gravedad del daño, la proporción y el número de personas con necesidades específicas, el número de domicilios dañados o destruidos y los cambios que sufren estas estimaciones en determinado período como parte de la encuesta.

The system La(PO3)3-Ca(PO3)2-P2O5

International Nuclear Information System (INIS)

Jungowska, W.; Znamierowska, T.

1993-01-01

Ternary system La(PO 3 ) 3 -Ca(PO 3 ) 2 -P 2 O 5 has been studied by means of thermal and roentgenography analysis. The existence of single intermediate compound CaLa(PO 3 ) 5 has been observed. The phase diagrams for the ternary system as well as for two binary systems La(PO 3 ) 3 -Ca(PO 3 ) 2 and CaLa(PO 3 ) 5 -LaP 5 O 11 have been shown. 7 refs, 3 figs

Microstructural dependence on relevant physical-mechanical properties on SiO2-Na2O-CaO-P2O5 biological glasses.

Science.gov (United States)

Rajendran, V; Begum, A Nishara; Azooz, M A; el Batal, F H

2002-11-01

Bioactive glasses of the system SiO2-Na2O-CaO-P2O5 have been prepared by the normal melting and annealing technique. The elastic moduli, attenuation, Vickers hardness, fracture toughness and fracture surface energy have been obtained using the known method at room temperature. The temperature dependence of elastic moduli and attenuation measurements have been extended over a wide range of temperature from 150 to 500 K. The SiO2 content dependence of velocities, attenuation, elastic moduli, and other parameters show an interesting observation at 45 wt% of SiO2 by exhibiting an anomalous behaviour. A linear relation is developed for Tg, which explores the influence of Na2O on SiO2-Na2O-CaO-P2O5 bioactive glasses. The measured hardness, fracture toughness and fracture surface energy show a linear relation with Young's modulus. It is also interesting to note that the observed results are functions of polymerisation and the number of non-bridging oxygens (NBO) prevailing in the network with change in SiO2 content. The temperature dependence of velocities, attenuation and elastic moduli show the existence of softening in the glass network structure as temperature increases.

Optimization of the thermodynamic properties and phase diagrams of P2O5-containing systems

Science.gov (United States)

Hudon, Pierre; Jung, In-Ho

2014-05-01

P2O5 is an important oxide component in the late stage products of numerous igneous rocks such as granites and pegmatites. Typically, P2O5 combines with CaO and crystallizes in the form of apatite, while in volatile-free conditions, Ca-whitlockite is formed. In spite of their interest, the thermodynamic properties and phase diagrams of P2O5-containg systems are not well known yet. In the case of the pure P2O5 for example, no experimental thermodynamic data are available for the liquid and the O and O' solid phases. As a result, we re-evaluated all the thermodynamic and phase diagram data of the P2O5 unary system [1]. Optimization of the thermodynamic properties and phase diagrams of the binary P2O5 systems was then performed including the Li2O-, Na2O-, MgO-, CaO-, BaO-, MnO-, FeO-, Fe2O3-, ZnO-, Al2O3-, and SiO2-P2O5 [2] systems. All available thermodynamic and phase equilibrium data were simultaneously reproduced in order to obtain a set of model equations for the Gibbs energies of all phases as functions of temperature and composition. In particular, the Gibbs energy of the liquid solution was described using the Modified Quasichemical Model [3-5] implemented in the FactSage software [6]. Thermodynamic modeling of the Li2O-Na2O-K2O-MgO-CaO-FeO-Fe2O3-Al2O3-SiO2 system, which include many granite-forming minerals such as nepheline, leucite, pyroxene, melilite, feldspar and spinel is currently in progress. [1] Jung, I.-H., Hudon, P. (2012) Thermodynamic assessment of P2O5. J. Am. Ceram. Soc., 95 (11), 3665-3672. [2] Rahman, M., Hudon, P. and Jung, I.-H. (2013) A coupled experimental study and thermodynamic modeling of the SiO2-P2O5 system. Metall. Mater. Trans. B, 44 (4), 837-852. [3] Pelton, A.D. and Blander, M. (1984) Computer-assisted analysis of the thermodynamic properties and phase diagrams of slags. Proc. AIME Symp. Metall. Slags Fluxes, TMS-AIME, 281-294. [4] Pelton, A.D. and Blander, M. (1986) Thermodynamic analysis of ordered liquid solutions by a modified

Riesgos sobre la salud de los alimentos modificados genéticamente: una revision bibliografica

Directory of Open Access Journals (Sweden)

Roig José L. Domingo

2000-01-01

Full Text Available A lo largo de 1999, se ha venido intensificando el debate sobre la seguridad de los alimentos modificados genéticamente, una importante y compleja área de investigación científica, la cual demanda unos estándares rigurosos. Diversos grupos, incluyendo asociaciones de consumidores y Organizaciones no Gubernamentales (ONGs han sugerido que todos los alimentos modificados genéticamente deberían ser sometidos a estudios a largo plazo con animales antes de su aprobación para el consumo humano. El principal objetivo de la presente revisión ha sido conocer cual es el estado actual de la cuestión en lo referente a los potenciales efectos adversos sobre la salud de los alimentos modificados genéticamente. Dos bases de datos, Medline y Toxline, así como una serie de direcciones de internet, han sido empleadas para la obtención de bibliografía. Aunque son numerosos los comentarios, noticias generales y cartas al Editor aparecidos en prestigiosas revistas, los artículos referentes a estudios experimentales sobre la seguridad de los alimentos modificados genéticamente son, sorprendentemente, muy escasos. Si se han obtenido resultados procedentes de la evaluación toxicológica de estos alimentos, no han sido publicados en revistas científicas y, por lo tanto, no han podido ser debidamente juzgados o contrastados.

Interaction of actinide ions with [NaP5W30O110]14- and [P2W18O62]6-

International Nuclear Information System (INIS)

Choppin, G.R.; Wall, D.E.

2003-01-01

Stability constants (log β 101 ) of Th 4+ , UO 2 2+ , NpO 2 + and Am 3+ with [NaP 5 W 30 O 110 ] 14- were determined by solvent extraction (μ = 0.1M NaCl) and found to be 6.18 ± 0.07, 3.80 ± 0.06, 2.98 ± 0.04, and 5.85 ± 0.05, respectively. The order of stability constants: Th 4+ > Am 3+ > UO 2 2+ > NpO 2 + is due to electrostatic repulsion between the actinyl oxygens and oxygens on the polyoxometalate surface. The order of stability constants for metal complexes with [P 2 W 18 O 62 ] 6- is Th 4+ > UO 2 2+ > Eu 3+ >NpO 2 + because the steric repulsion between actinyl oxygens and oxygens on polyoxometalate are less important. Enthalpies of complexation were measured by calorimetric titration of Th 4+ , UO 2 2+ , Nd 3+ with [NaP 5 W 30 O 110 ] 14- and [P 2 W 18 O 62 ] 6- . The results indicate that the conformation and charge distribution of the microscopic surface structures are important factors in the formation of pseudocolloids. (author)

Structure and properties of ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5}-TeO{sub 2} glasses

Energy Technology Data Exchange (ETDEWEB)

Mosner, Petr, E-mail: petr.mosner@upce.cz [Department of General and Inorganic Chemistry, University of Pardubice, Faculty of Chemical Technology, 53210 Pardubice (Czech Republic); Vosejpkova, Katerina; Koudelka, Ladislav [Department of General and Inorganic Chemistry, University of Pardubice, Faculty of Chemical Technology, 53210 Pardubice (Czech Republic); Montagne, Lionel; Revel, Bertrand [Unite de Catalyse et de Chimie du Solide - UCCS, Univ Lille Nord de France, F-59000, CNRS UMR 8181, USTL F-59655, ENSCL F-59652, Villeneuve d' Ascq (France)

2010-11-01

Zinc borophosphate glasses doped with TeO{sub 2} were studied in the compositional series (100 - x)[0.5ZnO-0.1B{sub 2}O{sub 3}-0.4P{sub 2}O{sub 5}]-xTeO{sub 2} in a broad concentration range of x = 0-80 mol% TeO{sub 2}. The structure of the glasses was studied by Raman and IR spectroscopy and by {sup 31}P and {sup 11}B MAS NMR spectroscopy. According to the Raman and IR spectra, TeO{sub 2} is incorporated in the structural network in the form of TeO{sub 3}, TeO{sub 3+1} and TeO{sub 4} structural units. The ratio of TeO{sub 4}/TeO{sub 3} increases with increasing TeO{sub 2} content in the glasses. The incorporation of TeO{sub x} units into the glass network is associated with the depolymerisation of phosphate chains, as revealed by Raman spectroscopy. The incorporation of TeO{sub 2} modifies also the coordination of boron atoms, where B(OP){sub 4} structural units are gradually replaced by B(OP){sub 4-n}(OTe){sub n} units. The addition of TeO{sub 2} to the parent zinc borophosphate glass results in a decrease of glass transition temperature associated with the replacement of stronger P-O and B-O bonds by weaker Te-O bonds. Chemical durability of glasses reveals a minimum at the glass containing 10 mol% TeO{sub 2}, but with further additions of TeO{sub 2} it improves and the glasses with a high TeO{sub 2} content reveal better durability than the parent zinc borophosphate glass.

Influence of phosphorous precursors on spectroscopic properties of Er3+-activated SiO2-HfO2-P2O5 planar waveguides

International Nuclear Information System (INIS)

Vasilchenko, I; Carpentiero, A; Chiappini, A; Chiasera, A; Ferrari, M; Vaccari, A; Lukowiak, A; Righini, G C; Vereshagin, V

2014-01-01

(70-x)SiO 2 -30HfO 2 -xP 2 O 5 (x= 5, 10 mol %) glass planar waveguides activated by 0.5 mol% Er 3 + ions were prepared by sol-gel route. Several phosphorous precursors have been investigated for the synthesis of a dielectric stable sol useful for the realization of planar waveguides. The waveguides were investigated by different diagnostic techniques. The optical properties such as refractive index, thickness, number of propagating modes and attenuation coefficient were measured at 632.8 and 543.5 nm by prism coupling technique. Transmission measurements were carried out in order to assess the transparency of the deposited films. Photoluminescence measurements and lifetime decay curves of the Er 3 + transition (4 I 13/2 → 4 I 15/2 ) were performed in order to investigate the role of P 2 O 5

Mössbauer spectroscopy study of 60P2O5-40Fe2O3 glass crystallization

Directory of Open Access Journals (Sweden)

Stoch Paweł

2015-03-01

Full Text Available 60P2O5-40Fe2O3 glass was synthesized and 57Fe Mössbauer spectroscopy study was presented. The main goal of the research was to investigate structural changes of local environment of iron ions during gradual crystallization of the glass. It was observed that some changes were evidenced at temperature of heat treatment higher than 400°C, above which content of tetrahedrally coordinated Fe3+ was increased in cost of octahedral sites. This led to formation of areas of nucleation of α-FePO4. Crystallization of α-Fe3(P2O72 and Fe2P2O7 was also observed.

The phenomenon of phase separated in Na2O-B2O3-SiO2, Na2O-SiO2-P2O5 glasses

International Nuclear Information System (INIS)

Procyk, B.; Bieniarz, P.; Plichta, E.; Pudelek, B.; Kucinski, G.; Staniewicz-Brudnik, B.

1997-01-01

During the thermal treatment, the phenomenon of phase separation has been observed in the some glasses. The glass has became opaque, due to the opalescence of phase separated. Investigations of the phenomenon of phase separation were conducted using the basic systems: Na 2 O-B 2 O 3 -SiO 2 , Na 2 O-SiO 2 -P 2 O 5 and theirs modifications. The occurrence of binodal and spinodal phase decomposition was observed by TEM. The phase separation inhomogeneities have drop-like character and with higher concentration shows a tendency for coalescence. The influence of the chemical composition, temperature and time on the phenomenon of phase separation in the investigated glasses has been defined. (author)

Processamento e caracterização de espumas vitrocerâmicas do sistema sncp (Sio2-Na2o-Cao-P2 O5 Processing and characterization of sncp (Sio2-Na2o-Cao-P2o5 glass-ceramic foams

Directory of Open Access Journals (Sweden)

Karoline Bastos Mundstock

2010-01-01

Full Text Available Glass-ceramics foams prepared from glasses of the SiO2-Na2O-CaO-P2O5 by replication process were obtained and characterized in terms of their chemical and physical properties by X-ray fluorescence, X-ray diffraction, laser diffraction, thermal analysis, density, mechanical strength, microstructural and cytotoxic analysis. The results showed that it is possible to produce glass-ceramic foams by the replication method with optimized properties but cytotoxic analysis indicates that the glass-ceramic foams are not bioactive materials. Mechanical strength values varying from 0.5 to 1.0 MPa and from 0.8 to 2.3 MPa were reached for mean particle sizes of 10 and 6 µm, respectively.

Zero photoelastic and water durable ZnO-SnO-P2O5-B2O3 glasses

Science.gov (United States)

Saitoh, Akira; Nakata, Kohei; Tricot, Grégory; Chen, Yuanyuan; Yamamoto, Naoki; Takebe, Hiromichi

2015-04-01

We report properties of zero birefringent xZnO-(67-x)SnO-(33-y)P2O5-y B2O3 glasses, within 18.5 ≤ x ≤ 22 and y = 0, 3, and 10 mol. %. These compositions of boro-phosphate glasses provide both zero photoelastic constant (PEC) and improved water durability. x = 19 and y = 3 compositions show minimum PEC of -0.002 × 10-12 Pa-1, which can contribute to candidate material for fiber current sensor devise without lead. The structures of zero photoelastic glasses were investigated by Raman scattering and nuclear magnetic resonance spectroscopies. Compositions of zero PEC glasses are explained by the empirical model proposed by Zwanziger et al. [Chem. Mater. 19, 286-290 (2007)].

Zoledronate complexes. III. Two zoledronate complexes with alkaline earth metals: [Mg(C(5)H(9)N(2)O(7)P(2))(2)(H(2)O)(2)] and [Ca(C(5)H(8)N(2)O(7)P(2))(H(2)O)](n).

Science.gov (United States)

Freire, Eleonora; Vega, Daniel R; Baggio, Ricardo

2010-06-01

Diaquabis[dihydrogen 1-hydroxy-2-(imidazol-3-ium-1-yl)ethylidene-1,1-diphosphonato-kappa(2)O,O']magnesium(II), [Mg(C(5)H(9)N(2)O(7)P(2))(2)(H(2)O)(2)], consists of isolated dimeric units built up around an inversion centre and tightly interconnected by hydrogen bonding. The Mg(II) cation resides at the symmetry centre, surrounded in a rather regular octahedral geometry by two chelating zwitterionic zoledronate(1-) [or dihydrogen 1-hydroxy-2-(imidazol-3-ium-1-yl)ethylidene-1,1-diphosphonate] anions and two water molecules, in a pattern already found in a few reported isologues where the anion is bound to transition metals (Co, Zn and Ni). catena-Poly[[aquacalcium(II)]-mu(3)-[hydrogen 1-hydroxy-2-(imidazol-3-ium-1-yl)ethylidene-1,1-diphosphonato]-kappa(5)O:O,O':O',O''], [Ca(C(5)H(8)N(2)O(7)P(2))(H(2)O)](n), consists instead of a Ca(II) cation in a general position, a zwitterionic zoledronate(2-) anion and a coordinated water molecule. The geometry around the Ca(II) atom, provided by six bisphosphonate O atoms and one water ligand, is that of a pentagonal bipyramid with the Ca(II) atom displaced by 0.19 A out of the equatorial plane. These Ca(II) coordination polyhedra are ;threaded' by the 2(1) axis so that successive polyhedra share edges of their pentagonal basal planes. This results in a strongly coupled rhomboidal Ca(2)-O(2) chain which runs along [010]. These chains are in turn linked by an apical O atom from a -PO(3) group in a neighbouring chain. This O-atom, shared between chains, generates strong covalently bonded planar arrays parallel to (100). Finally, these sheets are linked by hydrogen bonds into a three-dimensional structure. Owing to the extreme affinity of zoledronic acid for bone tissue, in general, and with calcium as one of the major constituents of bone, it is expected that this structure will be useful in modelling some of the biologically interesting processes in which the drug takes part.

Effect of pH values on surface modification and solubility of phosphate bioglass-ceramics in the CaO-P 2O 5-Na 2O-SrO-ZnO system

Science.gov (United States)

Li, Xudong; Cai, Shu; Zhang, Wenjuang; Xu, Guohua; Zhou, Wei

2009-08-01

The bioactive glass-ceramics in the CaO-P 2O 5-Na 2O-SrO-ZnO system were synthesized by the sol-gel technique, and then chemically treated at different pH values to study the solubility and surface modification. Samples sintered at 650 °C for 4 h consisted of the crystalline phase β-Ca 2P 2O 7 and the glass matrix. After soaking in the solution at pH 1.0, the residual glass matrix on the surface appeared entirely dissolved and no new phase could be detected. Whereas at pH 3.0, web-like layer exhibiting peaks corresponding to CaP 2O 6 was formed and covered the entire surface of the sample. When conducted at pH 10.0, only part of the glass matrix was dissolved and a new phase Ca 4P 6O 19 was precipitated, forming the petaline layer. The chemical treatment can easily change the surface morphologies and phase composition of this bioactive glass-ceramics. The higher level of surface roughness resulting from the new-formed layer would improve the interface bonding and benefit for cell adhesion.

Neutron scattering study on cathode LiMn2O4 and solid electrolyte 5(Li2O)(P2O5)

International Nuclear Information System (INIS)

Kartini, E.; Putra, Teguh P.; Jahya, A. K.; Insani, A.; Adams, S.

2014-01-01

Neutron scattering is very important technique in order to investigate the energy storage materials such as lithium-ion battery. The unique advantages, neutron can see the light atoms such as Hydrogen, Lithium, and Oxygen, where those elements are negligible by other corresponding X-ray method. On the other hand, the energy storage materials, such as lithium ion battery is very important for the application in the electric vehicles, electronic devices or home appliances. The battery contains electrodes (anode and cathode), and the electrolyte materials. There are many challenging to improve the existing lithium ion battery materials, in order to increase their life time, cyclic ability and also its stability. One of the most scientific challenging is to investigate the crystal structure of both electrode and electrolyte, such as cathodes LiCoO 2 , LiMn 2 O 4 and LiFePO 4 , and solid electrolyte Li 3 PO 4 . Since all those battery materials contain Lithium ions and Oxygen, the used of neutron scattering techniques to study their structure and related properties are very important and indispensable. This article will review some works of investigating electrodes and electrolytes, LiMn 2 O 4 and 5(Li 2 O)(P 2 O 5 ), by using a high resolution powder diffraction (HRPD) at the multipurpose research reactor, RSG-Sywabessy of the National Nuclear Energy Agency (BATAN), Indonesia

Electrical mobility of silver ion in Ag2O-B2O3-P2O5-TeO2 glasses.

Science.gov (United States)

Sklepić, Kristina; Vorokhta, Maryna; Mošner, Petr; Koudelka, Ladislav; Moguš-Milanković, Andrea

2014-10-16

The effect of adding TeO(2) into (100 - x)[0.5Ag(2)O - 0.1B(2)O(3) - 0.4P(2)O(5)] - xTeO(2), with 0-80 mol % TeO(2) glass, on the structural changes and electrical properties has been investigated. DSC and thermodilatomery were used to study their thermal behavior, structure was studied by Raman spectroscopy, and electrical properties have been studied by impedance spectroscopy over a wide temperature and frequency range. The introduction of TeO(2) as a third glass former to the glass network causes the structural transformation from TeO(3) (tp) to TeO(4) (tbp) which contributes to the changes in conductivity. The glasses with low TeO(2) content show only a slow decrease in dc conductivity with addition of TeO(2) due to the increase of the number of nonbridging oxygens, which increases the mobility of Ag(+) ions. The steep decrease in conductivity for glasses containing more than 40 mol % TeO(2) is a result of decrease of the Ag(2)O content and stronger cross-linkage in glass network through the formation of more Te-(eq)O(ax)-Te bonds in TeO(4) tbp units. The glasses obey ac conductivity scaling with respect to temperature, implying that the dynamic process is not temperature dependent. On the other hand, the scaling of the spectra for different glass compositions showed the deviations from the Summerfield scaling because of the local structural disorder which occurs as a result of the structural modifications in the tellurite glass network.

Phase Content and Equilibrium Relationships in Ternary Systems MOx/VO2,5/PO2,5 (M = TiIV, ZrIV, NbV; x = 2 or 2,5) with Additions for Four-Component System Ti/Cr/P/O

International Nuclear Information System (INIS)

Titlbach, Sven

2014-01-01

In the systems TiO 2 / V 2 O 5 / P 2 O 5 , ZrO 2 / V 2 O 5 / P 2 O 5 and Nb 2 O 5 / V 2 O 5 / P 2 O 5 studies on phase composition and the equilibrium relations were performed in the context of the heterogeneously catalyzed gas-phase oxidation of n-butane to maleic anhydride. Here is a selection of the research findings: in the system TiO 2 / V 2 O 5 / P 2 O 5 the hitherto unknown orthophosphate (VO)Ti 6 (PO 4 ) 9 and the mixed crystal series Ti(P 1-x V x ) 2 O 7 (0 ≤ x ≤ 0,24; 0,30 ≤ x ≤ 0,43) with miscibility gap was detected. In the quasi-ternary system ZrO 2 / V 2 O 5 / P 2 O 5 the literature well described gapless solid solution Zr(P 1-x V x ) 2 O 7 was confirmed and investigated radiographically and by NMR spectroscopy. In the system Nb 2 O 5 / V 2 O 5 / P 2 O 5 the mixed crystal series Nb 1-x V x O(PO 4 ) (0 ≤ x ≤ 0,36), P 1-x V x Nb 9 O 25 (0 ≤ x ≤ 1) and NbOP 1-x V x O 4 (0 ≤ x ≤ 0,20) were found.

Flexural strength and translucent characteristics of lithium disilicate glass-ceramics with different P2O5 content

International Nuclear Information System (INIS)

Wang, Fu; Gao, Jing; Wang, Hui; Chen, Ji-hua

2010-01-01

Lithium disilicate glass-ceramics derived from the SiO 2 -Li 2 O-K 2 O-Al 2 O 3 -ZrO 2 -P 2 O 5 system with different P 2 O 5 content (from 0.5 mol.% to 2.0 mol.% at a step of 0.5 mol.%) were prepared for dental restorative application. Flexural strength of final glass-ceramics and translucent characteristics expressed in term of contrast ratio (CR) were measured. The interrelations between P 2 O 5 content, microstructure and properties were discussed. Glass-ceramic with a P 2 O 5 content of 1.0 mol.%, in which elongated rod-like Li 2 Si 2 O 5 crystals formed an interlocking microstructure, showed the highest flexural strength and suitable contrast ratio for dental restorative application.

Modification of the short osmotic resistance test for evaluating the functional integrity of boar spermatozoa Teste de resistência osmótica modificado (sort modificado na avaliação da integridade funcional do espermatozóide de suíno

Directory of Open Access Journals (Sweden)

J.K.F. Nascimento

2001-06-01

Full Text Available Neste trabalho descreve-se a técnica do teste de resistência osmótica modificado (SORT modificado e sua eficiência na avaliação da integridade da membrana do acrossoma do espermatozóide do varrão. Modificaram-se as soluções usadas nos testes de resistência osmótica atuais, eliminando-se também a incubação em solução isosmótica (300 mOsml. Esta foi substituída pela percentagem de NAR das amostras de morfologia espermática.

Phytic acid derived bioactive CaO-P2O5-SiO2 gel-glasses.

Science.gov (United States)

Li, Ailing; Qiu, Dong

2011-12-01

The possibility of using phytic acid as a precursor to synthesize CaO-P(2)O(5)-SiO(2) glasses by sol-gel method has been explored and the pseudo ternary phase diagram has been established. It was shown that gel-glasses over a broader range of compositions could be prepared compared to other phosphorus precursors or melt-quenching method. Furthermore, phytic acid was found to assist calcium being incorporated into glass networks. In vitro tests in simulated body fluid (SBF) were performed on the above gel-glasses and it was found that they were bioactive over a much broader compositional range especially at high phosphate content, thus enabling one to design bioactive materials with various degradation rates by adjusting the phosphate content.

Internet, salud pública 2.0 y complejidad

Directory of Open Access Journals (Sweden)

Rodolfo Rodríguez

2014-12-01

Full Text Available Al día de hoy, Internet ha modificado el mundo y desde su incursión comercial a principios de la década de los noventa del siglo XX, el mundo no volvió a ser el mismo. El impacto de Internet ha sido monumental e históricamente pocos inventos en la historia de la humanidad han modificado de tal forma la vida del ser humano. Sin embargo, Internet es mucho más que unos computadores conectados y unas páginas web a las cuales acceder. Adicionalmente, algunas reglas de la naturaleza para células y especies también rigen para Internet. La World Wide Web y fenómenos que habitan en ella como la salud pública 2.0 son más que una red de sitios web conectados por hiperenlaces. La Web 2.0 pertenece a una de esas inteligencias colectivas donde así como en los enjambres, el concepto de autoorganización es fundamental. La nueva revolución científica aporta diferentes conceptos para intentar comprender las dinámicas de la World Wide Web y con ello entender desde otra perspectiva fenómenos complejos como la salud pública 2.0

Study of phase equilibria and glass formation in the CaO-WO3-P2O5 system

International Nuclear Information System (INIS)

Bielis, I.Ya.

1980-01-01

The method of quenching has been used to investigate the liquidus surface of a portion of the CaO-WO 3 -P 2 O 5 system limited by the Ca(PO 3 ) 2 -W 2 O 3 (PO 4 ) 2 and CaWO 4 -Ca 2 P 2 O 7 cross-sections. The primary crystallization fields on the compounds: WO 3 , W 2 O 3 (PO 4 ) 2 , CaWO 4 , Ca 2 P 7 O 7 , Ca(PO 3 ) 2 are separated. The liquidus surface isotherms at 900, 1000, 1100 and 1200 deg C have been plotted on the concentration triangle plane. It has been found that the cross-sections of W 2 O 3 (PO 4 ) 2 -Ca(PO 3 ) 2 , WO 3 -Ca(PO 3 ) 2 , WO 3 -Ca 2 P 2 O 7 and CaWO 4 -Ca 2 P 2 O 7 are eutectic-type quasi-binary systems. The position of the glass transition region in the CaO-WO 3 -P 2 O 5 system has been determined for the treatment temperatures of 1100, 1200 and 1300 deg C and a correlation between the configuration of the glass transition region and the phase diagram of the system has been demonstrated [ru

Regulação de organismos geneticamente modificados de uso agrícola no Brasil e sua relação com os modelos normativos europeu e estadunidense

Directory of Open Access Journals (Sweden)

MORICONI, Patrícia Rossi

2013-11-01

Full Text Available A biotecnologia avançou consideravelmente nos séculos XX e XXI, de tal forma que, atualmente, 29 países são responsáveis pela produção de 160 milhões de hectares de organismos geneticamente modificados (OGMs. Esse desenvolvimento científico, tecnológico e produtivo requer medidas de monitoramento e controle para impedir grandes e futuros danos da introdução desses produtos no meio ambiente e no mercado. O presente trabalho teve como objetivo apresentar o cenário brasileiro dos alimentos geneticamente modificados e a evolução do corpo legislativo nacional relativo a eles, analisando-o com base nas políticas internacionais de produção e comércio de transgênicos. Para tanto, foi realizado um levantamento no que tange à legislação e literatura, reportadas até o momento, sobre a evolução do cenário dos OGMs de origem vegetal no Brasil e no mundo, de 2007 a 2011, relacionando os dados obtidos com os modelos normativos europeu e estadunidense. As ações de vigilância sanitária no campo dos organismos geneticamente modificados são fundamentalmente de controle, monitoramento e fiscalização das etapas de desenvolvimento, plantio e comércio dos produtos transgênicos. A legislação brasileira segue os padrões internacionais de boas condutas relacionadas aos organismos geneticamente modificados, com normativas protetoras e com agências fiscalizadoras das atividades com esses produtos. No entanto, encontra-se em meio à dualidade das divergentes condutas europeia e americana, nas quais prevalece, atualmente, um posicionamento liberal.

Alimentos Transgénicos : Organismos Genéticamente Modificados (OGM)

OpenAIRE

Martín López, Jimena

2016-01-01

Los alimentos transgénicos son aquellos que proceden de un organismo modificado genéticamente. La introducción de este tipo de productos en nuestra dieta es un tema que genera controversia ya que en muchos casos no se conoce con exactitud los efectos que esta modificación puede tener en el ser humano. A lo largo de las páginas de este trabajo se explica la historia de la aparición de estos organismos gracias a procedimientos de ingeniería genética, en los que se modifican fragmentos de su ADN...

Organismos modificados genéticamente: una nueva amenaza para la seguridad alimentaria

Directory of Open Access Journals (Sweden)

Liliane Spendeler

2005-01-01

Full Text Available Este artículo analiza todos los aspectos referentes a la seguridad alimentaria relacionados con la introducción de los organismos modificados genéticamente en la agricultura y la alimentación. Se discuten las incertidumbres asociadas a la inserción de genes extra- ños en organismos, facilitando ejemplos de efectos imprevistos e indeseados y de inestabilidades de los organismos así fabricados artificialmente. Luego se aportan datos tanto de agencias oficiales como de la literatura existente, que cuestionan la seriedad y fiabilidad de los análisis de riesgo sobre la inocuidad para la salud de estos organismos y se discute la falta casi absoluta de estudios científicos que analicen la seguridad/peligrosidad de los alimentos transgénicos para la salud. Dadas todas estas incógnitas, se tienen que tomar en cuenta otros factores, en particular la contaminación genética de los cultivos no modificados genéticamente, que empieza a ser generalizada en algunas partes del mundo. No poder dar marcha atrás en caso de problemas resulta irresponsable. Otros elementos importantes son los impactos sobre el medio ambiente (como la aparición de resistencias en insectos, la pérdida de biodiversidad, el aumento de los productos químicos empleados con repercusiones indirectas sobre la salud y/o la futura producción de alimentos. Por último se introducen elementos de discusión sobre la seguridad alimentaria en términos de disponibilidad de alimentos y soberanía alimentaria, dado que el mercado de las semillas transgénicas y los agroquímicos asociados está copado por cinco grandes empresas transnacionales. La conclusi ón hace un análisis de la contribución de la agricultura biotecnoló- gica a la sostenibilidad.

Synthesis of bioactive poly(ethylene glycol)/SiO2-CaO-P2O5 hybrids for bone regeneration

International Nuclear Information System (INIS)

Liu Wei; Wu Xiaohong; Zhan Hongbing; Yan Fuhua

2012-01-01

Poly(ethylene glycol) (PEG)/SiO 2 -CaO-P 2 O 5 hybrid xerogels were prepared using a room temperature sol-gel process. The advantage of this hybrid material over conventional composites is the molecular scale interactions between the bioactive inorganic components and the biodegradable organic components. Since PEG was added into the sol when the hydrolysis of tetraethoxysilane occurred, the molecular chain of PEG was penetrated into the SiO 2 networks to form a semi-IPN structure. Due to the excellent biocompatibility and aqueous solubility of PEG molecules, as well as the bioactivity of the inorganic components, the biological and mechanical properties of this hybrid xerogel exhibit great potential for bone regeneration applications. The formation of hydroxyapatite was observed when the xerogel was immersed into simulated body fluid, demonstrating good bioactivity of the hybrid. The cell toxicity test also demonstrated that the hybrid material is suitable for the proliferation of MC3T3-E1 cells. Thus, the PEG/SiO 2 -CaO-P 2 O 5 hybrid xerogel has great potential to meet the demands of bone regeneration materials. - Highlights: ► PEG was penetrated into the SiO 2 networks to form a semi-IPN structure. ► This hybrid xerogel exhibit great potential for bone regeneration applications. ► SEM micrographs confirm the bioactivity of the samples.

A mixed iron-manganese based pyrophosphate cathode, Na2Fe0.5Mn0.5P2O7, for rechargeable sodium ion batteries.

Science.gov (United States)

Shakoor, Rana A; Park, Chan Sun; Raja, Arsalan A; Shin, Jaeho; Kahraman, Ramazan

2016-02-07

The development of secondary batteries based on abundant and cheap elements is vital. Among various alternatives to conventional lithium-ion batteries, sodium-ion batteries (SIBs) are promising due to the abundant resources and low cost of sodium. While there are many challenges associated with the SIB system, cathode is an important factor in determining the electrochemical performance of this battery system. Accordingly, ongoing research in the field of SIBs is inclined towards the development of safe, cost effective cathode materials having improved performance. In particular, pyrophosphate cathodes have recently demonstrated decent electrochemical performance and thermal stability. Herein, we report the synthesis, electrochemical properties, and thermal behavior of a novel Na2Fe0.5Mn0.5P2O7 cathode for SIBs. The material was synthesized through a solid state process. The structural analysis reveals that the mixed substitution of manganese and iron has resulted in a triclinic crystal structure (P1[combining macron] space group). Galvanostatic charge/discharge measurements indicate that Na2Fe0.5Mn0.5P2O7 is electrochemically active with a reversible capacity of ∼80 mA h g(-1) at a C/20 rate with an average redox potential of 3.2 V. (vs. Na/Na(+)). It is noticed that 84% of initial capacity is preserved over 90 cycles showing promising cyclability. It is also noticed that the rate capability of Na2Fe0.5Mn0.5P2O7 is better than Na2MnP2O7. Ex situ and CV analyses indicate that Na2Fe0.5Mn0.5P2O7 undergoes a single phase reaction rather than a biphasic reaction due to different Na coordination environment and different Na site occupancy when compared to other pyrophosphate materials (Na2FeP2O7 and Na2MnP2O7). Thermogravimetric analysis (25-550 °C) confirms good thermal stability of Na2Fe0.5Mn0.5P2O7 with only 2% weight loss. Owing to promising electrochemical properties and decent thermal stability, Na2Fe0.5Mn0.5P2O7, can be an attractive cathode for SIBs.

Influência da concentração de soro de leite e de amido modificado sobre algumas características de composição de bebidas lácteas não fermentadas

Directory of Open Access Journals (Sweden)

Shana P. Ferreira

2009-12-01

Full Text Available Este trabalho teve como objetivo estudar a influência da concentração de soro de leite (26, 30, 40, 50 e 54% e de amido modificado (0,1; 0,2; 0,4; 0,6 e 0,7% sobre os teores de lactose, sólidos totais e acidez titulável de bebidas lácteas não fermentadas. Foram elaboradas 11 formulações empregando-se o planejamento estatístico Delineamento Composto Central Rotacional (DCCR para avaliar a influência dos fatores estudados, sobre as variáveis avaliadas. Para análise estatística dos resultados realizou-se análise de regressão. Constatou-se que as concentrações de soro avaliadas apresentaram efeito significativo sobre os teores de lactose, sólidos totais e acidez titulável, e o amido modificado não apresentou efeito significativo.

Structure and some physical properties of PbO-P2O5 glasses

International Nuclear Information System (INIS)

El-Egili, K.; Doweidar, H.; Moustafa, Y.M.; Abbas, I.

2003-01-01

Glasses in the system xPbO·(100-x)P 2 O 5 (x=25-60 mol%) have been investigated using IR spectroscopy and by means of density and electrical-resistivity measurements. The infrared spectra revealed that for PbO 50 mol% PbO also plays the role of a network former. The greater rate of density increase for PbO>50 mol% is due to the formation of PbO 4 units. The conductivity of these glasses depends mainly on the mobility of Pb 2+ ions. The variation of the electrical conductivity parameters upon changing the composition have been correlated with the structural changes in the glass matrix

Surface and bulk modifications of 1.5 mole % Sr/La{sub 2}O{sub 3} catalyst with different Co, Ni, and Cu amounts

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Cortes, Sergio; Fontal, Bernardo [Universidad de los Andes, Merida (Venezuela); Moronta, Delfin [Universidad Central de Venezuela, Caracas (Venezuela)

2001-08-01

The effects of Co, Ni and Cu oxide content on the surface and bulk of the 1.5 mole % Sr/La{sub 2}O{sub 3} catalysts were studied. Series of M/Sr-La catalysts (MCo, Ni, Cu) were prepared by successive immersion impregnation. The solids were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), temperature-programmed reduction (TPR), electron paramagnetic resonance (EPR), specific surface area measurements (BET) and thermogravimetric analysis (TGA). The Sr/La{sub 2}O{sub 3} modified with different Co, Ni, and Cu loading shows a strong metal oxide interaction with La{sub 2}O{sub 3}. This probably begin over anionic vacancies or structure defects favoring LaSrMO{sub x} solid solution formation with island-like structures according to a Volmer-Weber growth. It is proposed that the growth mode of La-Co, La-Ni and La-Cu stoichiometric phases occur from solid solutions. The formation of only a La-M single phase, probably non-stoichiometric, increases the material porosity while different phases favor the agglomeration or sintering of the particles. [Spanish] En este trabajo se estudia el efecto de la cantidad de cobalto, niquel y cobre sobre las estructuras superficial y masica del sistema 1.5% molar Sr/La{sub 2}O{sub 3}. Los catalizadores M/Sr-La (M = Co, Ni, Cu) fueron preparados por el metodo de impregnacion con exceso de solucion. Los solidos se caracterizaron por difraccion de rayos-X, espectroscopia infrarroja con transformada de Fourier, reduccion a temperatura programada, resonancia paramagnetica del electron, medidas del area superficial especifica por el metodo de BET y analisis termogravimetrico. El catalizador Sr/La{sub 2}O{sub 3} modificado con diferentes cantidades de Co, Ni y Cu muestra una interaccion fuerte con el oxido del metal de transicion, probablemente sobre las vacancias anionicas o defectos estructurales que favorecen la formacion de la solucion solida LaSrMox en forma de isla, segun el mecanismo de crecimiento de fase de Volmer

Deposição de folhedo e fluxo de nutrientes em eucalipto geneticamente modificado

Directory of Open Access Journals (Sweden)

José Luiz Ferraresso Conti Júnior

2017-03-01

Full Text Available A deposição de folhedo é um dos principais indicadores de ciclagem de nutrientes em plantios florestais. O objetivo desse trabalho foi avaliar a dinâmica de deposição de folhedo, o fluxo dos nutrientes copa-solo via folhedo e a decomposição desse material em um plantio experimental de eucalipto geneticamente modificado. Não foram observadas alterações significativas na produção de folhedo ou no fluxo de nutrientes devido à transformação do eucalipto. As maiores variações observadas foram entre os dois clones estudados, mas foram inferiores às observadas comumente com as mudanças dos tratos silviculturais.

Structure, glass transition temperature and spectroscopic properties of 10Li2O-xP2O5-(89-x)TeO2-1CuO (5≤x≤25 mol%) glass system.

Science.gov (United States)

Upender, G; Babu, J Chinna; Mouli, V Chandra

2012-04-01

X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), energy dispersive X-ray spectrometry (EDS), differential scanning calorimetry (DSC), infrared (IR), Raman, electron paramagnetic resonance (EPR) and optical absorption studies on 10Li2O-xP2O5-(89-x)TeO2-1CuO glasses (where x=5, 10, 15, 20 and 25 mol%) have been carried out. The amorphous nature of the glasses was confirmed using XRD and FESEM measurements. The glass transition temperature (Tg) of glass samples have been estimated from DSC traces and found that the Tg increases with increasing P2O5 content. Both the IR and Raman studies have been showed that the present glass system consists of [TeO3], [TeO4], [PO3] and [PO4] units. The spin-Hamiltonian parameters such as g∥, g⊥, and A∥ have been determined from EPR spectra and it was found that the Cu2+ ion is present in tetragonal distorted octahedral site with [Formula: see text] as the ground state. Bonding parameters and bonding symmetry of Cu2+ ions have been calculated by correlating EPR and optical data and were found to be composition dependent. Copyright © 2012 Elsevier B.V. All rights reserved.

P2O5-doping in waste glasses: evolution of viscosity and crystallization processes

Science.gov (United States)

Tarrago, Mariona; Espuñes, Alex; Garcia-Valles, Maite; Martinez, Salvador

2015-04-01

Current concern for environmental preservation is the main motive for the study of new, more sustainable materials. Increasing amounts of sewage sludge are produced in wastewater treatment plants over the world every day. This fact represents a major problem for the municipalities and industries due to the volume of waste and also to the contaminant elements it may bear, which require expensive conditions for disposal in landfills. Vitrification is an established technique in the inertization of different types of toxic wastes (such as nuclear wastes and contaminated soils) that has been used successfully for sewage sludge. Glasses of basaltic composition (43.48SiO2-14.00Al2O3-12.86Fe2O3-10.00CaO-9.94MgO-3.27Na2O-1.96K2O-0.17MnO-0.55P2O5-2.48TiO2) are used as a laboratory analogous of wastes such as sewage sludge and galvanic sludge to study the properties of the inertization matrix. This basaltic matrix is doped by adding 1%, 2%, 3%, 4% and 20% of P5O5 in order to cover the compositional range of phosphate in sewage sludge encountered in the literature. In this study, the focus has been placed in the effect of the concentration of phosphate (P2O5) in glass stability, thermal properties and evolution of viscosity with temperature. The dependence of viscosity on temperature and the thermal behaviour of these glasses are critical parameters in the design of their production process. Regarding the compositional limits of the mixture, it has been observed that melt reactivity is much increased when P2O5 content is over 4%, hindering the glass conformation process. Moreover, stanfieldite (calcium and magnesium phosphate) crystallized during glass making when phosphate concentration approached 20%, hence establishing the upper limit for glass stability. Viscosity is also dramatically increased in this range, hence requiring production amends. Differential thermal analysis has provided nucleation and crystallization temperatures of the glasses around 915°C and 1050�

Caracterização de amidos de mandioca nativos e modificados e utilização em produtos panificados Characterization of native and modified cassava starches and their use in baked products

Directory of Open Access Journals (Sweden)

Krischina Singer Aplevicz

2007-09-01

Full Text Available O amido de mandioca é utilizado como ingrediente principal na fabricação de biscoitos e pão de queijo. O polvilho azedo é um produto artesanal, sem padrão de qualidade estabelecido, com problemas de higiene em seu processamento e de oferta. O trabalho teve como objetivo caracterizar amidos de mandioca nativos e modificados e testá-los na elaboração de pão de queijo e biscoito de polvilho. As principais características que diferem o polvilho azedo do amido de mandioca nativo, também denominado polvilho doce são: acidez, grau de expansão, viscosidade, claridade de pasta, sinérese e poder redutor. Foram aplicados nos produtos panificados quatro tipos de amidos, sendo polvilho doce, azedo, amido modificado com peróxido de hidrogênio e amido modificado comercial Expandex® 160003. Obtidos os produtos panificados, foi determinada a composição físico-química e observado que os tipos de amidos influenciaram nas características internas, externas e no sabor. Os produtos panificados foram submetidos à análise sensorial de aceitabilidade, utilizando-se a escala hedônica de nove pontos, com provadores não-treinados. As amostras de pão de queijo contendo amido modificado oxidado com peróxido de hidrogênio foram as que apresentaram o melhor resultado entre as formulações. Para as amostras de biscoito de polvilho, as elaboradas com polvilho azedo e com Expandex® 160003 foram superiores e não diferiram estatisticamente.Cassava starch is used as the main ingredient in the production of biscuits and Brazilian cheese bread. The processing and sale of sour cassava starch - an artisanal product with no established standard of quality - is marked by hygiene problems and its commercial availability is uncertain. The purpose of this study was to characterize native and modified cassava starches and test them in cheese bread and cassava starch biscuit recipes. The main characteristics that differentiate sour starch from native cassava

Investigation of bioactive CaO-P2O5-MgO-SiO2 ceramic composition for orthopedic applications

Science.gov (United States)

Kaur, Pardeep; Singh, K. J.; Sood, Henna; Arora, Daljit Singh

2017-05-01

Bioactive sample of the composition 41CaO-8P2O5-17MgO-34SiO2 has been prepared in the laboratory by quick alkali mediated sol-gel method. 1M ammonia solution has been used to form the gel. Bioactivity of the sample has been analyzed by soaking the samples in simulated body fluid. Degradation study has also undertaken to check the degradation behavior of the sample. MTT cytotoxic test has also been done to know the toxicity of the sample and results show that samples has good percentage of cell viability in the cell culture media. Formation of the hydroxyapatite has been confirmed by the XRD, Raman spectroscopy and FESEM-EDX study.

Application of radiometric method to determine P/sub 2/O/sub 5/ at Verkhnekamsk phosphorite mine

Energy Technology Data Exchange (ETDEWEB)

Belyakov, M A; Terent' ev, E P; Anderzhanov, V N

1981-01-01

Correlations between P/sub 2/O/sub 5/ content and natural radioactivity in phosphorites of Vjatsko-Kamsk deposits and products of their enrichment, are considered. A scheme of an installation to conduct continuous radiometric control of P/sub 2/O/sub 5/ content in the pulp flow is presented. The results of the installation test at Verkhnekamsk phosphorite mine to control P/sub 2/O/sub 5/ content in the flow final rejects are given.

X-ray photoelectron spectroscopic and electrochemical impedance spectroscopic analysis of RuO_2-Ta_2O_5 thick film pH sensors

International Nuclear Information System (INIS)

Manjakkal, Libu; Cvejin, Katarina; Kulawik, Jan; Zaraska, Krzysztof; Socha, Robert P.; Szwagierczak, Dorota

2016-01-01

The paper reports on investigation of the pH sensing mechanism of thick film RuO_2-Ta_2O_5 sensors by using X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Interdigitated conductimetric pH sensors were screen printed on alumina substrates. The microstructure and elemental composition of the films were examined by scanning electron microscopy and energy dispersive spectroscopy. The XPS studies revealed the presence of Ru ions at different oxidation states and the surface hydroxylation of the sensing layer increasing with increasing pH. The EIS analysis carried out in the frequency range 10 Hz–2 MHz showed that the electrical parameters of the sensitive electrodes in the low frequency range were distinctly dependent on pH. The charge transfer and ionic exchange occurring at metal oxide-solution interface were indicated as processes responsible for the sensing mechanism of thick film RuO_2-Ta_2O_5 pH sensors. - Highlights: • Conductimetric pH sensors with RuO_2-Ta_2O_5 thick film electrodes were developed. • Microstructure and elemental composition of the films were examined by SEM and EDX. • Sensing film composition and hydroxylation were studied by XPS as a function of pH. • Electrochemical reactions at oxide-solution interface were analyzed by EIS method. • Impact of solution pH, electrode composition and sintering temperature was studied.

Formation of hydroxyapatite onto glasses of the CaO-MgO-SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives.

Science.gov (United States)

Agathopoulos, S; Tulyaganov, D U; Ventura, J M G; Kannan, S; Karakassides, M A; Ferreira, J M F

2006-03-01

New bioactive glasses with compositions based on the CaO-MgO-SiO(2) system and additives of B(2)O(3), P(2)O(5), Na(2)O, and CaF(2) were prepared. The in vitro mineralization behaviour was tested by immersion of powders or bulk glasses in simulated body fluid (SBF). Monitoring of ionic concentrations in SBF and scanning electron microscopy (SEM) observations at the surface of the glasses were conducted over immersion time. Raman and infrared (IR) spectroscopy shed light on the structural evolution occurring at the surface of the glasses that leads to formation of hydroxyapatite.

Orbital-Specific observation of O2p and Ni3d electrons in LiNi0.5Mn0.5O2, a cathode material for lithium-ion batteries

Science.gov (United States)

Satou, Yoshinori; Komine, Shigeki; Shimizu, Sumera

2017-09-01

Cathode materials for lithium-ion batteries containing Ni2+ have attracted much interest because of their high theoretical capacity. However, the precise electronic structures of these cathode materials have not yet been clearly observed, especially the energy positions of the O2p and Ni3d orbitals and the shape of the density of states. The aim of this study was to investigate the relative energy positions and shape of the density of states of O2p and Ni3d for LiNi0.5Mn0.5O2 experimentally. We cleaved a LiNi0.5Mn0.5O2 pellet in an Ar-filled glove box and performed synchrotron ultraviolet photoelectron spectroscopy for different photon energies, which enabled us to investigate the relative cross-section intensity of O2p and Ni3d. As a result, the valence-band structure was determined. We found that O2p electrons are itinerant and exist in the vicinity of the Fermi energy more than Ni3d electrons. Ni3d electrons are more localized and spread mainly from 1.2-1.5 eV below the Fermi energy. To validate the electronic structure, we measured the synchrotron O K-edge X-ray absorption fine structure of electrochemically lithium-extracted LiNi0.5Mn0.5O2. The electronic structure demonstrated that ligand holes in the oxygen atoms form below the Fermi level during the initial stage of Li extraction and that the formation rate of the holes decreases with Li extraction.

Sol-Gel SiO2-CaO-P2O5 biofilm with surface engineered for medical application

Directory of Open Access Journals (Sweden)

Sonia Regina Federman

2007-06-01

Full Text Available Sol-gel film in the SiO2-CaO-P2O5 system was prepared from TEOS, TEP, alcohol and hydrated calcium nitrate in an acidic medium. The coatings were deposited on stainless steel using the dip-coating technique. After deposition, the composite was submitted to heat treatment, at different temperatures and exposure times to investigate the influence of such parameters on the surface morphology of the composite. The coated surfaces were characterized by AFM, SEM and FTIR. The present study showed that the formation of different textures (an important parameter in implant fixation could be controlled by temperature and time of heat treatment.

Orbital-Specific observation of O2p and Ni3d electrons in LiNi0.5Mn0.5O2, a cathode material for lithium-ion batteries

Directory of Open Access Journals (Sweden)

Yoshinori Satou

2017-09-01

Full Text Available Cathode materials for lithium-ion batteries containing Ni2+ have attracted much interest because of their high theoretical capacity. However, the precise electronic structures of these cathode materials have not yet been clearly observed, especially the energy positions of the O2p and Ni3d orbitals and the shape of the density of states. The aim of this study was to investigate the relative energy positions and shape of the density of states of O2p and Ni3d for LiNi0.5Mn0.5O2 experimentally. We cleaved a LiNi0.5Mn0.5O2 pellet in an Ar-filled glove box and performed synchrotron ultraviolet photoelectron spectroscopy for different photon energies, which enabled us to investigate the relative cross-section intensity of O2p and Ni3d. As a result, the valence-band structure was determined. We found that O2p electrons are itinerant and exist in the vicinity of the Fermi energy more than Ni3d electrons. Ni3d electrons are more localized and spread mainly from 1.2–1.5 eV below the Fermi energy. To validate the electronic structure, we measured the synchrotron O K-edge X-ray absorption fine structure of electrochemically lithium-extracted LiNi0.5Mn0.5O2. The electronic structure demonstrated that ligand holes in the oxygen atoms form below the Fermi level during the initial stage of Li extraction and that the formation rate of the holes decreases with Li extraction.

Quenching of I(2P1/2) by O3 and O(3P).

Science.gov (United States)

Azyazov, Valeriy N; Antonov, Ivan O; Heaven, Michael C

2007-04-26

Oxygen-iodine lasers that utilize electrical or microwave discharges to produce singlet oxygen are currently being developed. The discharge generators differ from conventional chemical singlet oxygen generators in that they produce significant amounts of atomic oxygen. Post-discharge chemistry includes channels that lead to the formation of ozone. Consequently, removal of I(2P1/2) by O atoms and O3 may impact the efficiency of discharge driven iodine lasers. In the present study, we have measured the rate constants for quenching of I(2P1/2) by O(3P) atoms and O3 using pulsed laser photolysis techniques. The rate constant for quenching by O3, (1.8 +/- 0.4) x 10(-12) cm3 s-1, was found to be a factor of 5 smaller than the literature value. The rate constant for quenching by O(3P) was (1.2 +/- 0.2) x 10(-11) cm3 s-1.

Relación entre daño mitocondrial y producción de H2O2 en embriones bovinos producidos in vitro con alto y bajo potencial de desarrollo

Directory of Open Access Journals (Sweden)

Marlene Jiménez

2001-04-01

Full Text Available <p>Los embriones producidos in vitro (EPIV presentan bloqueo en el
desarrollo en el momento de la activación del genoma (8-16 células en bovinos, limitando la producción de blastocitos (35%. Este fenómeno ha sido relacionado con la producción de Especies Reactivas de Oxígeno (ERO. Entre las fuentes de ERO se han descrito altas tensiones de oxígeno, exposición a la luz y alteración del metabolismo oxidativo (1. Los EPIV con baja competencia para superar el bloqueo presentan fallas en la funcionalidad mitocondrial (1 y nucleolar, exhibiendo un retardo en su tasa de clivaje (2. Algunos autores han relacionado el tiempo al primer clivaje con la cantidad relativa de ciertos
transcriptos, como Glutatión (2, un limpiador de ERO, sugiriendo que los embriones incompetentes presentan fallas  transcripcionales que les impiden defenderse contra las ERO producidas en cultivo, quizás manteniendo niveles elevados de H2O2 lo que los hace más susceptibles al daño celular.
Hasta el presente no se ha efectuado un estudio de cinética de producción de ERO, en EPIV bovinos con alta y baja competencia durante el desarrollo temprano, ni se ha logrado esclarecer el papel de la mitocondria en la generación de ERO (como fuente o como blanco.
Los objetivos de este estudio son determinar la cinética de producción de H2O2 en embriones con alta y baja competencia para superar el bloqueo y la relación de éstos con procesos de daño mitocondrial y mortalidad embrionaria.p>

 >

Chemical durability and Structural approach of the glass series (40-y) Na2O-yFe2O3-5Al2O3-55P2O5-by IR, X-ray diffraction and Mössbauer Spectroscopy

International Nuclear Information System (INIS)

Aqdim, S; Sayouty, El H; Elouad, B; Greneche, J M

2012-01-01

The relationship between the composition and structure for the glasses of general composition (40-y)Na 2 O-yFe 2 O 3 -5Al 2 O 3 -55P 2 O 5 (5≤y≤20), has been studied. The chemical durability and density of these glasses increase with increasing Fe 2 O 3 content. The dissolution rate (D R ), calculated from the weight loss in distilled water at 90°C for up to 20 days was ≈ 3.10 −9 g/cm 2 /mn which is 30 times lower than that of window glass. The structure and valence states of the iron ions in the glasses were investigated using, X-ray diffraction, 57Fe Mössbauer spectrometry, potentiometric analysis, and infrared spectroscopy. Both Mössbauer spectrometry and potentiometric analysis allow to estimate both Fe 2+ and Fe 3+ contents in all these glasses. X-ray diffraction indicates that the local structure of iron phosphate glasses is related to the short range structures of NaFeP 2 O 7 . Infrared spectra indicate the formation of P–O–Fe bonds in the pyrophosphate glasses that replace P–O–Na bonds. The presence of a small content of Al 2 O 3 in the glass seems to play a role as a network modifier. The addition of Fe 2 O 3 to Al 2 O 3 in phosphate glasses favours the enhancement of the formation of pyrophosphate units because iron ions have stronger effect on the depolymerization of metaphosphate chains than the aluminium ions. Finally, the I.R spectra indicate that the presence of P-O-Fe bands of these glasses containing more than 15 mol%Fe 2 O 3 is consistent with their good chemical durability.

Hydrolyzed collagen, modified starch and guar gum addition in turkey ham Adição de colágeno hidrolisado, amido modificado e goma guar em presunto de peru

Directory of Open Access Journals (Sweden)

Rosa Cristina Prestes

2012-07-01

Full Text Available The main problems observed in cooked hams are bad sliceability and excessive fluid loss after cooking. To reduce these problems the industry uses non-meat ingredients such as soy protein and carrageenan, but under Brazilian law, it is not allowed to add starch or modified starch in hams. Three ingredients were tested in the present research: modified starch (0 to 2.0%, gum guar (0 to 0.30% and hydrolyzed collagen (0 to 2.0%, following a 2³ full factorial design with five repetitions in the central point. The guar gum produced low resistance to reheating, however in losses by cooling, the results were adequate. The hydrolyzed collagen tested did not give satisfactory results, showing low acceptance due to formation of gel in the ham and high losses. The developed products were not different from the commercial product in relation to texture (P>0.05. The formulation F6 (2.0% of modified starch was the one with the best results and greater acceptance as detected by the tasters. Based on the results obtained it seems appropriate to propose the legal permission of starch in ham or the creation of a new class of product in which starch addition would be allowed.Os principais problemas observados em presuntos são a má fatiabilidade e a perda excessiva de líquidos após o cozimento. Para reduzir esses problemas, a indústria utiliza ingredientes não cárneos, tais como a proteína de soja e a carragena, porém, segundo a legislação brasileira, não é permitida a adição de amido ou amido modificado. Neste trabalho, foram testados três ingredientes, em presunto cozido de peru: amido modificado (0 a 2,0%, goma guar (0 a 0,30% e colágeno hidrolisado (0 a 2,0%, seguindo um delineamento fatorial completo 2³ com cinco repetições no ponto central. A goma guar apresentou baixa resistência ao reaquecimento, no entanto, nas perdas por resfriamento, os resultados foram adequados. O colágeno hidrolisado testado não proporcionou resultados satisfat

Aterosclerosis subclínica y perfil metabólico en mujeres asintomáticas de edad media, con TSH ≥ 2,5 uUI/mL

Directory of Open Access Journals (Sweden)

Rosa M. Pando-Álvarez

2012-04-01

Full Text Available El hipotiroidismo subclínico puede contribuir al desarrollo de patologías cardiovasculares y se ha demostrado que a partir de niveles de TSH >2,5uUI/mL se desarrolla disfunción endotelial. Objetivos: Determinar el grosor de la íntima media carotídea (GIMC, la presencia de placas en carótidas y el perfil metabólico en mujeres de edad media asintomáticas con TSH ≥2,5 uUI/mL y compararlas con aquellas con niveles <2,5 uUI/mL. Diseño: Estudio transversal y analítico. Lugar: Hospital Nacional Dos de Mayo e Instituto de Investigaciones Clínicas, Universidad Nacional Mayor de San Marcos, Lima, Perú. Participantes: Mujeres sin historia de enfermedad tiroidea, cardiovascular o diabetes. Intervenciones: En 60 mujeres sin historia de enfermedad tiroidea, cardiovascular o diabetes, con edad promedio de 53,8 ± 5,8 años, se determinó la tirotropina (TSH, colesterol total (CT, colesterol de densidad alta (HDL, triglicéridos (Tg, glucosa (G basal y a los 120 minutos (TTGO, insulina basal (Ins-B; se calculó las fracciones de colesterol de densidad baja (LDL, el nivel de insulinorresistencia (HOMA-IR, la presión arterial, perímetro de cintura abdominal, el índice de masa corporal (IMC y el GIMC mediante ecoDoppler. Principales medidas de resultados: TSH ≥2,5 uUI/mL, perfil metabólico y su relación con GIMC. Resultados: El 38,3% presentó TSH ≥2,5 y 61,7% TSH <2,5 uUI/mL. El 56% de mujeres con TSH ≥2,5 y 65% con TSH <2,5 uUI/ml fueron hipertensas, sin diferencia estadística. El perfil lipídico, G basal, Ins-B e índice HOMA-IR fueron semejantes en ambos grupos. Se observó niveles significativamente más altos del IMC, G a los 120 minutos, el GIMC en carótida izquierda y el mayor entre ambas carótidas en las mujeres con TSH ≥2,5 uUI/mL (p=0,03, p=0,01, p=0,008 y p=0,02, respectivamente. La presencia de placas en la carótida izquierda y en al menos una de las carótidas fue significativamente más frecuente entre aquellas con

Via póstero-lateral unilateral para cifoplastia percutánea con balón Acesso póstero-lateral unilateral para cifoplastia percutânea com balão Posterolateral unilateral approach for percutaneous baloon kyphoplasty

Directory of Open Access Journals (Sweden)

Daniel Oscar Ricciardi

2013-01-01

Full Text Available Esta experiencia ha sido realizada en el Hospital Alvarez de Buenos Aires, Argentina en pacientes tratados por el Equipo de Columna Vertebral. El autor ha modificado el método original de punción descrito por Valls y Ottolenghi, lo que permite ubicar al paciente en decúbito lateral y prescinde del instrumental descrito originalmente, como spider y guía que se utilizaban con equipos de rayos X convencionales. El presente trabajo pretende describir en detalle la técnica aplicada para efectuar la cifoplastía con balón en vértebras torácicas y lumbares por vía póstero-lateral extrapedicular unilateral bajo anestesia local infiltrativa.Esta experiência foi realizada no Hospital Alvarez de Buenos Aires, Argentina, em pacientes tratados pela Equipe de Coluna Vertebral, que tenho a honra de liderar. O autor modificou o método original de punção descrito por Valls e Ottolenghi, o que permite colocar o paciente em decúbito lateral prescindindo da instrumentação originalmente descrita, tal como spider e fio-guia que eram utilizados com equipamento de raios-X convencional. Este trabalho tem como objetivo descrever em detalhes a técnica utilizada para realizar cifoplastia com balão em vértebras torácicas e lombares por acesso póstero-lateral extrapedicular unilateral com anestesia local por infiltração.This experiment was performed at the Hospital Alvarez from Buenos Aires, Argentina, in patients treated by the Spine Team, which I have the honor to lead. The author modified the original puncture method described by Valls and Ottolenghi, which allows accommodating the patient in the lateral position dispensing the instrumentation originally described like spider and guide wires that were used with X-ray conventional. This paper aims to describe in detail the technique used to perform balloon kyphoplasty for thoracic and lumbar vertebrae by posterolateral extrapedicular unilateral approach with local anesthesia by infiltration.

Compositional and microstructural design of highly bioactive P2O5-Na2O-CaO-SiO2 glass-ceramics.

Science.gov (United States)

Peitl, Oscar; Zanotto, Edgar D; Serbena, Francisco C; Hench, Larry L

2012-01-01

Bioactive glasses having chemical compositions between 1Na(2)O-2CaO-3SiO(2) (1N2C3S) and 1.5Na(2)O-1.5CaO-3SiO(2) (1N1C2S) containing 0, 4 and 6 wt.% P(2)O(5) were crystallized through two stage thermal treatments. By carefully controlling these treatments we separately studied the effects on the mechanical properties of two important microstructural features not studied before, crystallized volume fraction and crystal size. Fracture strength, elastic modulus and indentation fracture toughness were measured as a function of crystallized volume fraction for a constant crystal size. Glass-ceramics with a crystalline volume fraction between 34% and 60% exhibited a three-fold improvement in fracture strength and an increase of 40% in indentation fracture toughness compared with the parent glass. For the optimal crystalline concentration (34% and 60%) these mechanical properties were then measured for different grain sizes, from 5 to 21 μm. The glass-ceramic with the highest fracture strength and indentation fracture toughness was that with 34% crystallized volume fracture and 13 μm crystals. Compared with the parent glass, the average fracture strength of this glass-ceramic was increased from 80 to 210 MPa, and the fracture toughness from 0.60 to 0.95 MPa.m(1/2). The increase in indentation fracture toughness was analyzed using different theoretical models, which demonstrated that it is due to crack deflection. Fortunately, the elastic modulus E increased only slightly; from 60 to 70 GPa (the elastic modulus of biomaterials should be as close as possible to that of cortical bone). In summary, the flexural strength of our best material (215 MPa) is significantly greater than that of cortical bone and comparable with that of apatite-wollastonite (A/W) bioglass ceramics, with the advantage that it shows a much lower elastic modulus. These results thus provide a relevant guide for the design of bioactive glass-ceramics with improved microstructure. Copyright © 2011 Acta

Comparação do teste modificado de fixação preferencial com o convencional em pacientes com estrabismo

Directory of Open Access Journals (Sweden)

Edson Procianoy

2012-04-01

Full Text Available OBJETIVO: Comparar a acurácia do teste de fixação preferencial quando o paciente olha e toca o objeto alvo ao invés de apenas olhá-lo, como convencionalmente descrito. MÉTODOS: Estudo piloto transversal e prospectivo, incluindo 40 pacientes estrábicos, com desvios maiores que 10 dioptrias prismáticas entre 7 e 30 anos. RESULTADOS: O teste modificado mostrou sensibilidade de 93% (IC 95%=68,53 -98,73% e especificidade de 77% (IC 95%=57,95 - 88,97%. O teste convencional apresentou sensibilidade de 93% (IC 95%=68,53 - 98,73% e especificidade 46% (IC 95%= 28,76 - 64,54%. CONCLUSÕES: Estes resultados sugerem que a modificação no teste de fixação preferencial, solicitando que o paciente toque o objeto alvo, possa reduzir os resultados falsos positivos do teste.

Avaliação de risco dos organismos geneticamente modificados Risk assessment of genetically modified organisms

Directory of Open Access Journals (Sweden)

Thadeu Estevam Moreira Maramaldo Costa

2011-01-01

Full Text Available Desde o começo de sua comercialização, em 1996, a área global de plantações transgênicas aumentou mais de cinquenta vezes. Nas duas últimas décadas, organizações governamentais e intergovernamentais têm planejado estratégias e protocolos para o estudo da segurança de alimentos derivados de cultivos geneticamente modificados. Os testes de segurança são realizados caso a caso e conduzidos de acordo com as características específicas das culturas modificadas e as mudanças introduzidas através da modificação genética, levando em conta o conceito de equivalência substancial. No presente trabalho, estão relatadas algumas abordagens de avaliação de risco de alimentos geneticamente modificados, assim como alguns problemas relacionados à construção genética ou mesmo à expressão do gene inseridoSince the commercial approve in 1996, the global area of transgenic crops has raised more than 50 times. In the last two decades, governments have been planning strategies and protocols for safety assessment of food and feed genetically modified (GM. Evaluation of food safety should be taken on a case-by-case analysis depending on the specific traits of the modified crops and the changes introduced by the genetic modification, using for this the concept of substantial equivalence. This work presents approaches for the risk assessment of GM food, as well as some problems related with the genetic construction or even with the expression of the inserted gene

pO2 and pCO2 increment in post-dialyzer blood: the role of dialysate.

Science.gov (United States)

Sombolos, Kostas I; Bamichas, Gerasimos I; Christidou, Fotini N; Gionanlis, Lazaros D; Karagianni, Anna C; Anagnostopoulos, Theodoros C; Natse, Taïsir A

2005-11-01

Blood returning from a dialyzer during hemodialysis has a higher pO2 and pCO2 content than blood entering the dialyzer, and this has been attributed to the dialysate. The present study investigates this phenomenon. Acid-base and blood-gas parameters (pH, pO2, pCO2 and HCO3) were measured in three groups of stable chronic hemodialysis patients (A, B, and C) undergoing high-flux hemodialysis. In group A (n = 15), "arterial" (a) and "venous" (v) samples were withdrawn simultaneously before dialysis (samples A0), 5 min after circulation of the blood with the dialysate in the by-pass mode (samples A5), and 5 min after high-flux hemodialysis at a zero ultrafiltration rate (samples A10). In group B (n = 11) (a) and (v) samples were withdrawn simultaneously before dialysis (samples B0), 5 min after isolated-ultrafiltration with closed dialysate ports ("isolated-closed" ultrafiltration) (samples B5), and 5 min after high-flux hemodialysis at a zero ultrafiltration rate (samples B10). In group C (n = 14), after an initial arterial blood sample withdrawal before hemodialysis (sample C0), high-flux hemodialysis at a zero ultrafiltration rate was initiated. Five minutes later, blood and dialysate samples were withdrawn simultaneously from the hemodialysis lines (samples C5). In all cases blood and dialysate (bicarbonate) flow rates were set at 0.300 and 0.700 L/min, respectively. FLX-18 hemodialyzers (membrane PEPA 1.8 m2) were used in this study. Analysis of variance revealed significant changes only in venous samples. A comparison of arterial and venous samples revealed no differences between groups A and B before the initiation of dialysis (A0a vs. A0v and B0a vs. B0v, P = NS). The pO2 content was higher in A5v samples than in A5a samples (83.5 +/- 11.2 vs. 88.8 +/- 14.0 mm Hg, P pO2, pCO2, and HCO3 in comparison to A10v samples (P pO2 and pCO2 values in A5v and A10v samples increased by 6.3% and 12.1% and by 1.29% and 52% in comparison to corresponding values of A5a and A10

Preparation of orthophosphate glasses in the MgO-CaO-SiO2-Nb2O5-P2O5 system.

Science.gov (United States)

Lee, Sungho; Ueda, Kyosuke; Narushima, Takayuki; Nakano, Takayoshi; Kasuga, Toshihiro

2017-01-01

Niobia/magnesia-containing orthophosphate invert glasses were successfully prepared in our earlier work. Orthophosphate groups in the glasses were cross-linked by tetrahedral niobia (NbO4) and magnesia. The aim of this work is to prepare calcium orthophosphate invert glasses containing magnesia and niobia, incorporating silica, and to evaluate their structures and releasing behaviors. The glasses were prepared by melt-quenching, and their structures and ion-releasing behaviors were evaluated. 31P solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies showed the glasses consist of orthophosphate (PO4), orthosilicate (SiO4), and NbO4 tetrahedra. NbO4 and MgO in the glasses act as network formers. By incorporating SiO2 into the glasses, the chemical durability of the glasses was slightly improved. The glasses reheated at 800°C formed the orthophosphate crystalline phases, such as β-Ca3(PO4)2, Mg3(PO4)2 and Mg3Ca3(PO4)4 in the glasses. The chemical durability of the crystallized glasses was slightly improved. Orthosilicate groups and NbO4 in the glasses coordinated with each other to form Si-O-Nb bonds. The chemical durability of the glasses was slightly improved by addition of SiO2, since the field strength of Si is larger than that of Ca or Mg.

Bending strength of glass-ceramics based on 3CaO.P2O5-SiO2-MgO glass system

International Nuclear Information System (INIS)

Daguano, J.K.M.F.; Suzuki, P.A.; Santos, C.; Fernandes, M.H.V.; Elias, C.N.

2009-01-01

In this work, the Modulus of Rupture of bioactive glass-ceramic based on 3CaO.P 2 O 5 -SiO 2 -MgO system was investigated, aiming its use in bone-restorations. The mechanical property was correlated with microstructural and crystallographic features of this material. High-purity starting-powders, CaCO 3 , SiO 2 , MgO, Ca (H 2 PO 4 ).H 2 O, were used in this study. The powders were mixed in a stoichiometric ratio, using planetary ball-mill. The suspensions were dried, sieved and melted at 1600 deg C, for 4h. The casting ones were cooled quickly until annealing temperature 700 deg C, in which remained for 2h, with controlled cooling-rate until ambient temperature. Bulks of glass were heat-treated with temperatures varying between 700 deg C and 1100 deg C, for 4h, being after that, cooled at 3 deg C/min. Bioactive glass and glass-ceramic were characterized by HRXRD (high resolution X-ray diffraction), where whitlockite was main phase. The microstructure was analyzed by scanning electronic microscopy. Modulus of Rupture was determined by four-point bending testing using specimens of 1.5 x 2 x 25 mm and glasses presented strength near to 70MPa, while glass ceramics treated at 975 deg C-4h, presented bending strength of 120MPa. (author)

Reliable measurement of the Li-like 2248Ti 1s2s2p 4P5/2o level lifetime by beam-foil and beam-two-foil experiments

International Nuclear Information System (INIS)

Nandi, T.; Ahmad, Nissar; Wani, A. A.; Marketos, P.

2006-01-01

We have determined the lifetime of the Li-like 22 48 Ti 1s2s2p 4 P 5/2 o level (210.5±13.5 ps) using data from its x-ray decay channel through beam single- and two-foil experiments, coupled to a multicomponent iterative growth and decay analysis. Theoretical lifetime estimates for this zero-nuclear-spin ion lies within the uncertainty range of our experimental results, indicating that blending contributions to this level from the He-like 1s2p 3 P 2 o and 1s2s 3 S 1 levels are eliminated within the current approach. A previously reported discrepancy between experimental and theoretical 1s2s2p 4 P 5/2 o level lifetimes in 23 51 V may, as a result, be attributed to hyperfine quenching

Uso do índice de Kotelchuck modificado na avaliação da assistência pré-natal e sua relação com as características maternas e o peso do recém-nascido no Município do Rio de Janeiro

Directory of Open Access Journals (Sweden)

Leal Maria do Carmo

2004-01-01

Full Text Available O índice de Kotelchuck (IK foi modificado e utilizado para avaliar a assistência pré-natal prestada no Município do Rio de Janeiro - Brasil, em uma amostra de 9920 puérperas de parto único. Regressões multivariadas logística ordinal (RMLO e linear (RML foram utilizadas para estimar a importância de fatores demográficos, psicossociais e obstétricos no IK modificado e seus efeitos no peso ao nascer (PN, respectivamente. Apenas 38,5% das parturientes do Município do Rio de Janeiro foram classificadas como de cuidado pré-natal adequado ou intensivo. Após ajustamento por outros preditores, mantiveram-se como variáveis explicativas do IK: o nível de instrução, viver com o pai do RN, tentar abortar, diabetes, satisfação com a gravidez, cor da pele, paridade, idade e local de residência. O PN associou-se com o IK modificado, mesmo após o controle de variáveis sociodemográficas, comportamentais e biológicas. A utilização adequada da assistência pré-natal no Município do Rio de Janeiro contribuiu na prevenção do PN e as mães que menos utilizaram os serviços pré-natais têm piores condições socioeducacionais, de apoio familiar e de risco obstétrico.

Propiedades dieléctricas de láminas delgadas de (Pb,CaTiO3 con alto contenido de Ca

Directory of Open Access Journals (Sweden)

Calzada, M. L.

2004-04-01

Full Text Available Lead titanate thin films modified with calcium, Pb1-xCaxTiO3, with x>35%, have been deposited onto Pt/TiO2/SiO2/(100Si y Pt/(100MgO substrates, by the sol-gel method and a rapid thermal processing (RTP. Properties similar to the counterpart bulk ceramics are planned, such as the decrease of the phase transition temperature and the increase of permittivity at room temperature. Films with Ca content close to 40 % and 50% exhibit at room temperature, high enough permittivity with reduced temperature dependence and a C-V behaviour that make them of interest for DRAM and high frequency devices.Se han preparado láminas delgadas de titanato de plomo modificado con calcio, Pb1-xCaxTiO3, (PTCa con x>35%, depositadas sobre substratos de Pt/TiO2/SiO2/(100Si y Pt/(100MgO, empleando la técnica de sol-gel y un horno rápido de procesado (RTP. Se intenta obtener propiedades cercanas al material cerámico masivo, como son la bajada de la temperatura de la transición ferro-paraeléctrica y el aumento de la permitividad, ε´ a temperatura ambiente. Así, se consiguen láminas de contenido de Ca próximas al 40% y 50% con valores altos de permitividad, poco dependientes de la temperatura, que presentan un alto carácter difuso en la transición para temperaturas próxima a ambiente y un comportamiento de la capacidad con el voltaje, C-V,que las hacen de interés en la fabricación de DRAM y dispositivos para alta frecuencia.

Silver effect on the structure of SiO2-CaO-P2O5 ternary system

International Nuclear Information System (INIS)

Vulpoi, Adriana; Baia, Lucian; Simon, Simion; Simon, Viorica

2012-01-01

In this study are reported results obtained from the structural, morphological and textural investigations of 56SiO 2 ∙(40-x)CaO·4P 2 O 5 ·xAg 2 O system, where 0 ≤ x ≤ 10 mol%. The samples obtained by sol–gel method were annealed and then characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), thermal gravimetric analysis (TGA), vibrational spectroscopy (Raman, FTIR), N 2 -adsorption measurements, and transmission electron microscopy (TEM). XRD patterns of the investigated samples exhibit tricalcium phosphate (TCP) nanostructured phase and show the existence of metallic silver as dispersed phase. The presence of apatite-like phase is underlined by the recorded Raman and especially FT-IR spectra. TEM pictures indicate the presence of silver nanoparticles of almost spherical shapes and various sizes inside the matrix, depending on the Ag 2 O content. Regarding the textural properties, it was observed both a decrease of the specific surface area as well as a progressive change of the mesoporous characteristics with the silver addition, the latter behavior recommending the potential use of these samples for applications, where the morphology control is required.

Non-isothermal crystallization kinetics of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Li, Bin, E-mail: stra-ceo@163.com; Wang, Yongya; Luo, Wenqin; Li, Jingfen [Huzhou University, Department of Material Chemistry (China); Li, Jianyou [Huzhou Central Hospital, Orthopedic Department (China)

2017-03-15

Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass ceramics containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} were prepared by sol-gel method. The samples were characterized by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The activation energy and kinetic parameters for crystallization of the samples were calculated by the Johnson-Mehi-Avrami (JMA) model and Augis-Bennett method according to the results of DSC. The results showed that the crystallization mechanism of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, whose non-isothermal kinetic parameter n = 2.3, was consistent with surface crystallization of the JMA model. The kinetics model function of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, f(α) = 2.3(1–α)[–ln(1–α)]{sup 0.57}, was also obtained. The addition of nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} could reduce the activation energy, which made the crystal growth modes change from onedimensional to three-dimensional.

La{sub 3}Cu{sub 4}P{sub 4}O{sub 2} and La{sub 5}Cu{sub 4}P{sub 4}O{sub 4}Cl{sub 2}. Synthesis, structure and {sup 31}P solid state NMR spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Bartsch, Timo; Eul, Matthias; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Benndorf, Christopher; Eckert, Hellmut [Muenster Univ. (Germany). Inst. fuer Physikalische Chemie; Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. of Physics

2016-04-01

The phosphide oxides La{sub 3}Cu{sub 4}P{sub 4}O{sub 2} and La{sub 5}Cu{sub 4}P{sub 4}O{sub 4}Cl{sub 2} were synthesized from lanthanum, copper(I) oxide, red phosphorus, and lanthanum(III) chloride through a ceramic technique. Single crystals can be grown in a NaCl/KCl flux. Both structures were refined from single crystal X-ray diffractometer data: I4/mmm, a = 403.89(4), c = 2681.7(3) pm, wR2 = 0.0660, 269 F{sup 2} values, 19 variables for La{sub 3}Cu{sub 4}P{sub 4}O{sub 2} and a = 407.52(5), c = 4056.8(7) pm, wR2 = 0.0905, 426 F{sup 2} values, 27 variables for La{sub 5}Cu{sub 4}P{sub 4}O{sub 4}Cl{sub 2}. Refinement of the occupancy parameters revealed full occupancy for the oxygen sites in both compounds. The structures are composed of cationic (La{sub 2}O{sub 2}){sup 2+} layers and covalently bonded (Cu{sub 4}P{sub 4}){sup 5-} polyanionic layers with metallic characteristics, and an additional La{sup 3+} between two adjacent (Cu{sub 4}P{sub 4}){sup 5-} layers. The structure of La{sub 5}Cu{sub 4}P{sub 4}O{sub 4}Cl{sub 2} comprises two additional LaOCl slabs per unit cell. Temperature-dependent magnetic susceptibility studies revealed Pauli paramagnetism. The phosphide substructure of La{sub 3}Cu{sub 4}P{sub 4}O{sub 2} was studied by {sup 31}P solid state NMR spectroscopy. By using a suitable dipolar re-coupling approach the two distinct resonances belonging to the P{sub 2}{sup 4-} and the P{sup 3-} units could be identified.

Role of P{sub 2}O{sub 5} on protonic conduction in sol-gel-derived binary phosphosilicate glasses

Energy Technology Data Exchange (ETDEWEB)

Wang, C.; Abe, Y.; Kasuga, T.; Nogami, M. [Nagoya Institute of Technology, Aichi (Japan). Dept. of Materials Sceince and Engineering

1999-11-01

Sol-gel derived P{sub 2}O{sub 5}-SiO{sub 2} glasses were studied and a remarkable improvement in protonic conduction was observed by increasing the P{sub 2}O{sub 5} content. This was attributed to (1) the variation in glass structure including the reduction of the degree of cross-linking skeleton and the increase of specific surface area of glass due to the non-bridging oxygen (P=O) in P-O tetrahedron, (2) the formation of stronger hydrogen bond between hydroxyl group and P=O group as well as hydroxyl group and, (3) the p-{pi} resonance effect in O{sub (3-t)}PO(OH){sub t} unit. (author)

Effect of B{sub 2}O{sub 3}/P{sub 2}O{sub 5} substitution on the properties and structure of tin boro-phosphate glasses

Energy Technology Data Exchange (ETDEWEB)

Saitoh, Akira, E-mail: asaito@ehime-u.ac.jp [Graduate School of Science and Engineering, Ehime University, Matsuyama, 3 Bunkyo-cho (Japan); Tricot, Grégory [LASIR UMR-CNRS 8516, Université de Lille 1, Villeneuve d' Ascq 59655 (France); UCCS UMR-CNRS 8181, Université de Lille 1, Villeneuve d' Ascq 59655 (France); Rajbhandari, Prashant [UCCS UMR-CNRS 8181, Université de Lille 1, Villeneuve d' Ascq 59655 (France); Anan, Shoji; Takebe, Hiromichi [Graduate School of Science and Engineering, Ehime University, Matsuyama, 3 Bunkyo-cho (Japan)

2015-01-15

Effect of B{sub 2}O{sub 3}/P{sub 2}O{sub 5} substitution on the properties and structure of the ternary 67SnO–(33–x)P{sub 2}O{sub 5}–xB{sub 2}O{sub 3} composition line (from x = 0–33 mol%) are examined in this contribution. We show that density and glass transition temperature increase while molar volume and thermal expansion coefficient decrease with increasing B{sub 2}O{sub 3} concentration. Density and thermal properties experience an original three-domain evolution with rapid (region I: 0 ≤ x < 5), substantial (II: 5 < x ≤ 15), and moderate (III: 15 < x ≤ 33) increase. In order to explain this unconventional behaviour, the glass structure has been investigated using high magnetic field 1 dimensional {sup 31}P and {sup 11}B MAS–NMR, micro-Raman and infrared spectroscopies. {sup 11}B MAS–NMR experiments allow to (i) monitor the 3- and 4-fold coordinated borate species proportion and (ii) highlight the presence of unreported 4-fold coordinated species in the region (III). Finally, it is shown that substitution of P{sub 2}O{sub 5} by B{sub 2}O{sub 3} induces an alteration of the dimeric phosphate network and formation of mixed anion structure that consists of Q{sup 0} phosphate units, 3- and 4-fold coordinated borate units and their combinations. - Highlights: • We examined B{sub 2}O{sub 3}/P{sub 2}O{sub 5} substitution effect on the ternary SnO–P{sub 2}O{sub 5}–B{sub 2}O{sub 3} glasses. • We show a three-domains evolution for density and thermal properties. • The structure was investigated by {sup 31}P and {sup 11}B NMR, Raman and IR spectroscopies. • 3 and 4-folded borate species and unreported 4-folded species are revealed. • Mixed anion structure consists of Q{sup 0} phosphate unit and 3- and 4-folded borate units.

Bending strength of glass-ceramics based on 3CaO.P{sub 2}O{sub 5}-SiO{sub 2}-MgO glass system; Resistencia a fratura de vitroceramicos do sistema 3CaO.P{sub 2}O{sub 5}-SiO{sub 2}-MgO

Energy Technology Data Exchange (ETDEWEB)

Daguano, J.K.M.F.; Suzuki, P.A.; Santos, C. [Universidade de Sao Paulo (EEL/USP), Lorena, SP (Brazil). Escola de Engenharia de Lorena. Dept. de Engenharia de Materiais; Fernandes, M.H.V. [Universidade de Aveiro (UAveiro/CECICO), Aveiro (Portugal). Centro de Investigacao em Materiais Ceramicos e Compositos. Dept. de Engenharia Ceramica e do Vidro; Elias, C.N. [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Lab. de Biomateriais

2009-07-01

In this work, the Modulus of Rupture of bioactive glass-ceramic based on 3CaO.P{sub 2}O{sub 5}-SiO{sub 2}-MgO system was investigated, aiming its use in bone-restorations. The mechanical property was correlated with microstructural and crystallographic features of this material. High-purity starting-powders, CaCO{sub 3}, SiO{sub 2}, MgO, Ca (H{sub 2}PO{sub 4}).H{sub 2}O, were used in this study. The powders were mixed in a stoichiometric ratio, using planetary ball-mill. The suspensions were dried, sieved and melted at 1600 deg C, for 4h. The casting ones were cooled quickly until annealing temperature 700 deg C, in which remained for 2h, with controlled cooling-rate until ambient temperature. Bulks of glass were heat-treated with temperatures varying between 700 deg C and 1100 deg C, for 4h, being after that, cooled at 3 deg C/min. Bioactive glass and glass-ceramic were characterized by HRXRD (high resolution X-ray diffraction), where whitlockite was main phase. The microstructure was analyzed by scanning electronic microscopy. Modulus of Rupture was determined by four-point bending testing using specimens of 1.5 x 2 x 25 mm and glasses presented strength near to 70MPa, while glass ceramics treated at 975 deg C-4h, presented bending strength of 120MPa. (author)

Bioactivity of Y2O3 and CeO2 doped SiO2-SrO-Na2O glass-ceramics.

Science.gov (United States)

Placek, L M; Keenan, T J; Wren, A W

2016-08-01

The bioactivity of yttrium and cerium are investigated when substituted for Sodium (Na) in a 0.52SiO2-0.24SrO-0.24-xNa2O-xMO glass-ceramics (where x = 0.08 and MO = Y2O3 or CeO2). Bioactivity is monitored through pH and inductively coupled plasma-optical emission spectrometry where pH of simulated body fluid ranged from 7.5 to 7.6 and increased between 8.2 and 10.0 after 14-day incubation with the glass-ceramic disks. Calcium (Ca) and phosphorus (P) levels in simulated body fluid after incubation with yttrium and cerium containing disks show a continual decline over the 14-day period. In contrast, Con disks (not containing yttrium or cerium) caused the elimination of Ca in solution after 1 day and throughout the incubation period, and initially showed a decline in P levels followed by an increase at 14 days. Scanning electron microscopy and energy dispersive spectroscopy confirmed the presence of Ca and P on the surface of the simulated body fluid-incubated disks and showed precipitates on Con and HCe (8 mol% cerium) samples. Cell viability of MC3T3 osteoblasts was not significantly affected at a 9% extract concentration. Optical microscopy after 24 h cell incubation with disks showed that Con samples do not support osteoblast or Schwann cell growth, while all yttrium and cerium containing disks have direct contact with osteoblasts spread across the wells. Schwann cells attached in all wells, but only showed spreading with the HY-S (8 mol% yttrium, heated to sintering temperature) and YCe (4 mol% yttrium and cerium) disks. Scanning electron microscopy of the compatible disks shows osteoblast and sNF96.2 Schwann cells attachment and spreading directly on the disk surfaces. © The Author(s) 2016.

Radiometric control for P/sub 2/O/sub 5/ content in Polpinsky are deposit phosphorites

Energy Technology Data Exchange (ETDEWEB)

Belyakov, M A; Berenshtein, M L; Startsev, V K; Akindinov, V A

1977-01-01

Results are cited of laboratory research into the possibility of radiometric determination of P/sub 2/O/sub 5/ in phosphorites of Polpinsky deposit. On the basis of the studies performed, a plant and methods have been developed for the continuous control of P/sub 2/O/sub 5/ content in ore. The plant has been tested at the Bryansk phosphorite works. The accuracy of analysis is 0.8 percent.

Wear of MgO-CaO-SiO2-P2O5-F-Based Glass Ceramics Compared to Selected Dental Ceramics

Directory of Open Access Journals (Sweden)

Jongee Park

2007-01-01

Full Text Available Wear of a glass-ceramic produced through controlled crystallization of a glass in the MgO-CaO-SiO2-P2O5-F system has been evaluated and compared to various commercial dental ceramics including IPS Empress 2, Cergo Pressable Ceramic, Cerco Ceram, and Super porcelain EX-3. Wear tests were performed in accord with the ASTM G99 for wear testing with a pin-on-disk apparatus. The friction coefficient and specific wear rate of the materials investigated were determined at a load of 10 N and at ambient laboratory conditions. Microhardness of the materials was also measured to elucidate the appropriateness of these materials for dental applications.

Bioactivity and cell proliferation in radiopaque gel-derived CaO-P2O5-SiO2-ZrO2 glass and glass-ceramic powders.

Science.gov (United States)

Montazerian, Maziar; Yekta, Bijan Eftekhari; Marghussian, Vahak Kaspari; Bellani, Caroline Faria; Siqueira, Renato Luiz; Zanotto, Edgar Dutra

2015-10-01

In this study, 10 mol% ZrO2 was added to a 27CaO-5P2O5-68SiO2 (mol%) base composition synthesized via a simple sol-gel method. This composition is similar to that of a frequently investigated bioactive gel-glass. The effects of ZrO2 on the in vitro bioactivity and MG-63 cell proliferation of the glass and its derivative polycrystalline (glass-ceramic) powder were investigated. The samples were characterized using thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) coupled to energy dispersive X-ray spectroscopy (EDS). Release of Si, Ca, P and Zr into simulated body fluid (SBF) was determined by inductively coupled plasma (ICP). Upon heat treatment at 1000 °C, the glass powder crystallized into an apatite-wollastonite-zirconia glass-ceramic powder. Hydroxycarbonate apatite (HCA) formation on the surface of the glass and glass-ceramic particles containing ZrO2 was confirmed by FTIR and SEM. Addition of ZrO2 to the base glass composition decreased the rate of HCA formation in vitro from one day to three days, and hence, ZrO2 could be employed to control the rate of apatite formation. However, the rate of HCA formation on the glass-ceramic powder containing ZrO2 crystal was equal to that in the base glassy powder. Tests with a cultured human osteoblast-like MG-63 cells revealed that the glass and glass-ceramic materials stimulated cell proliferation, indicating that they are biocompatible and are not cytotoxic in vitro. Moreover, zirconia clearly increased osteoblast proliferation over that of the Zr-free samples. This increase is likely associated with the lower solubility of these samples and, consequently, a smaller variation in the media pH. Despite the low solubility of these materials, bioactivity was maintained, indicating that these glassy and polycrystalline powders are potential candidates for bone graft substitutes and bone cements with

Effect of γ-radiation on electrical properties in glasses of AgI-Ag2O-V2O5-P2-O5 system

International Nuclear Information System (INIS)

El-Shaarawy, M.G.; Bayoumy, W.A.A.

2004-01-01

Five glasses of the AgI-Ag 2 O-V 2 O 5 -P 2 O 5 system exhibiting mixed electronic-ionic conduction were prepared and irradiated by γ-rays. The structures of the irradiated and unirradiated glasses were studied using density, FT-IR, X-ray diffraction (XRD), electron spin resonance (ESR) and scanning electron microscope (SEM). The electrical conductivity (σ), dielectric constant (ε') and dielectric loss (ε'') for the irradiated and unirradiated glasses are also investigated over a temperature range between 300-380 K and at a frequency from dc to 10 6 Hz. Both components of ionic σ i and electronic σ e conductivities were separated from the total conductivity σ tot =σ i + σ e using impedance spectroscopy method. The temperature dependencies of electronic and ionic conductivities as well as corresponding transference numbers were studied. The activation energy values E e and E i for both conduction processes were determined. The temperature dependence of ε' showed an increase in ε' with T. Each of ε' and ε'' was found to be dependent on the composition of the glass matrix. The effect of both γ-radiation and the framework composition of the glass on the electrical properties have been discussed. (author)

REMOCIÓN DE CROMO VI DE SOLUCIONES ACUOSAS POR ADSORCIÓN SOBRE CARBONES ACTIVADOS MODIFICADOS

Directory of Open Access Journals (Sweden)

Nubia Céspedes

2009-05-01

Full Text Available En este trabajo se determina la adsorción de Cr6+ de disoluciones acuosas en dos carbones activados comerciales en función del grado de modificación (reducción, oxidación de la superficie de los adsorbentes con tratamientos térmicos en presencia de hidrógeno, oxígeno y ácido nítrico. La química superficial de los carbones activados originales y modificados se examina por los métodos de titulaciones de Böehm y descomposición con temperatura programada (DTP. Los ensayos de evaluación de la capacidad de adsorción se realizan con soluciones modelo de ión cromato y bajo distintas condiciones de concentración inicial, tiempo de contacto, pH del medio, temperatura y masa de adsorbente. Se comprueba que la modificación de la superficie de los adsorbentes afecta el grado de adsorción del ión cromato en la medida en que los sólidos tratados con H2 muestran la mayor  capacidad de remoción. Las variables que afectan favorablemente la extensión de la remoción de cromo son: concentración inicial de 100 ppm,  pH  inicial de  2,0, temperatura de 25 °C y  masa de adsorbente de 100 mg. 

Encapsulamento do Dióxido de Titânio (TiO2 pela Técnica de Polimerização em Emulsão

Directory of Open Access Journals (Sweden)

Oliveira Adriano M.

2002-01-01

Full Text Available Este trabalho apresenta uma metodologia de encapsulamento do TiO2 pela técnica de polimerização em emulsão. O pigmento foi previamente modificado por um titanato em heptano. O titanato usado foi o tri-isoestearato iso-propoxi de titânio, que reage com os grupos hidroxilas da superfície do TiO2. O pigmento modificado foi encapsulado por metacrilato de metila (MMA, usando persulfato de amônio como iniciador e dodecil sulfato de sódio (SDS como emulsificante. A reação de encapsulamento foi conduzida em um reator de vidro encamisado, utilizando dois processos de polimerização diferentes: batelada e semi-contínuo. A caracterização do pigmento modificado foi feita pela técnica de Infravermelho com Transformada de Fourier (FTIR. Os rendimentos das reações de modificação e de encapsulamento foram determinados pela técnica de Análise Termogravimétrica (TGA.

Investigation of the effect of doping of Cr2O3 on bioactivity properties of the SiO2-CaO-P2O5 bioceramics

Science.gov (United States)

Sarin, Nonita; Singh, K. J.; Kaur, Kulwinder; Anand, Vikas; Kaur, Raminderjit; Singh, Jatinder

2018-05-01

Due to better biocompatibility among various types of biomaterials, bioceramics have been found to be useful for the repair of damaged bone tissues. Authors have prepared bioceramics of the composition xCr2O3-(40-x) SiO2- 40CaO-20P2O5(where, x = 0 and 2 mole %) by using sol gel technique. Prepared samples have been assessed for their bioactivity and cell viability with the help of X-ray diffraction, Fourier transform infrared and MG63 cell line. The aim of this study is to estimate the practical utility of the prepared samples as successful implant materials in human body.

Comportamientos relacionados con la salud en estudiantes de Santa Marta: comparación entre colegios públicos y privados

Directory of Open Access Journals (Sweden)

Lauris Munive Gutierrez

2013-10-01

Full Text Available Resumen Hoy en día se sabe que los perfiles de morbilidad y mortalidad de un país se encuentran ligados a patrones de comportamientos que pueden ser modificados y que, por tanto, cualquier persona puede adoptar conductas saludables para contribuir a su propio bienestar. Por ello, los comportamientos relacionados con la salud han sido objeto de estudios en los últimos años. Esto aunado, a sus consecuencias sociales, económicas y de la salud, como son los embarazos no planeados, infecciones de transmisión sexual (ITS, en especial el VIH-SIDA, lo cual ha hecho que se reconozca como un problema de salud pública. El objetivo de la presente investigación fue el de comparar los comportamientos relacionados con la salud de adolescentes escolarizados de colegios públicos y privados de la ciudad de Santa Marta. Se utilizó un diseño de tipo transversal, con 2039 mujeres y 1536 varones, con una edad promedio de 17.5 años. Se concluye que existen diferencias en los comportamientos relacionados con la salud en estudiantes de colegios públicos y privados de la ciudad, siendo los estudiantes de colegios públicos, independiente del género, quienes presentan mayores comportamientos de riesgo para la salud. (DUAZARY 2011, 58 - 65AbstractToday it is known that morbidity and mortality profile of a country are linked to patterns of behavior that can be modified and that therefore, anyone can adopt healthy behaviors to contribute to their own welfare. Thus, behaviors related to health have been studied in recent years. This coupled, their social, economic and health, such as unplanned pregnancies, sexually transmitted infections (STIs including HIV / AIDS, which has led to recognized as a public health problem. The objective of this research was to compare health-related behaviors of adolescent students in schools public and private in the city of Santa Marta. We used a cross-sectional design with 2039 women and 1536 men with an average age of 17.5

Neutron scattering study on cathode LiMn{sub 2}O{sub 4} and solid electrolyte 5(Li{sub 2}O)(P{sub 2}O{sub 5})

Energy Technology Data Exchange (ETDEWEB)

Kartini, E., E-mail: kartini@batan.go.id; Putra, Teguh P., E-mail: kartini@batan.go.id; Jahya, A. K., E-mail: kartini@batan.go.id; Insani, A., E-mail: kartini@batan.go.id [Technology Center for Nuclear Industry Materials, National Nuclear Energy Agency, Serpong 15314 (Indonesia); Adams, S. [Department of Materials Science and Engineering, National University of Singapore, Singapore-117576 (Singapore)

2014-09-30

Neutron scattering is very important technique in order to investigate the energy storage materials such as lithium-ion battery. The unique advantages, neutron can see the light atoms such as Hydrogen, Lithium, and Oxygen, where those elements are negligible by other corresponding X-ray method. On the other hand, the energy storage materials, such as lithium ion battery is very important for the application in the electric vehicles, electronic devices or home appliances. The battery contains electrodes (anode and cathode), and the electrolyte materials. There are many challenging to improve the existing lithium ion battery materials, in order to increase their life time, cyclic ability and also its stability. One of the most scientific challenging is to investigate the crystal structure of both electrode and electrolyte, such as cathodes LiCoO{sub 2}, LiMn{sub 2}O{sub 4} and LiFePO{sub 4}, and solid electrolyte Li{sub 3}PO{sub 4}. Since all those battery materials contain Lithium ions and Oxygen, the used of neutron scattering techniques to study their structure and related properties are very important and indispensable. This article will review some works of investigating electrodes and electrolytes, LiMn{sub 2}O{sub 4} and 5(Li{sub 2}O)(P{sub 2}O{sub 5}), by using a high resolution powder diffraction (HRPD) at the multipurpose research reactor, RSG-Sywabessy of the National Nuclear Energy Agency (BATAN), Indonesia.

Influence of P2O5 and Al2O3 content on the structure of erbium-doped borosilicate glasses and on their physical, thermal, optical and luminescence properties

International Nuclear Information System (INIS)

Bourhis, Kevin; Massera, Jonathan; Petit, Laeticia; Ihalainen, Heikki; Fargues, Alexandre; Cardinal, Thierry; Hupa, Leena; Hupa, Mikko; Dussauze, Marc; Rodriguez, Vincent; Boussard-Plédel, Catherine; Bureau, Bruno; Roiland, Claire; Ferraris, Monica

2015-01-01

Highlights: • Reorganization of the glass structure induced by the addition of P 2 O 5 or Al 2 O 3 . • Emission properties related to the presence of P or Al in the Er 3+ coordination shell. • Declustering observed upon addition of P 2 O 5 . • No declustering upon addition of Al 2 O 3 . - Abstract: The effect of P 2 O 5 and/or Al 2 O 3 addition in Er-doped borosilicate glasses on the physical, thermal, optical, and luminescence properties is investigated. The changes in these glass properties are related to the glass structure modifications induced by the addition of P 2 O 5 and/or Al 2 O 3 , which were probed by FTIR, 11 B MAS NMR and X-ray photoelectron spectroscopies. Variations of the polymerization degree of the silicate tetrahedra and modifications in the [3] B/ [4] B ratio are explained by a charge compensation mechanism due to the formation of AlO 4 , PO 4 groups and the formation of Al-O-P linkages in the glass network. From the absorption and luminescence properties of the Er 3+ ions at 980 nm and 1530 nm, declustering is suspected for the highest P 2 O 5 concentrations while for the highest Al 2 O 3 concentrations no declustering is observed

Effect of ZrO(2) additions on the crystallization, mechanical and biological properties of MgO-CaO-SiO(2)-P(2)O(5)-CaF(2) bioactive glass-ceramics.

Science.gov (United States)

Li, H C; Wang, D G; Meng, X G; Chen, C Z

2014-06-01

A series of ZrO(2) doped MgO-CaO-SiO(2)-P(2)O(5)-CaF(2) bioactive glass-ceramics were obtained by sintering method. The crystallization behavior, phase composition, morphology and structure of glass-ceramics were characterized. The bending strength, elastic modulus, fracture toughness, micro-hardness and thermal expansion coefficient (TEC) of glass-ceramics were investigated. The in vitro bioactivity and cytotoxicity tests were used to evaluate the bioactivity and biocompatibility of glass-ceramics. The sedimentation mechanism and growth process of apatites on sample surface were discussed. The results showed that the mainly crystalline phases of glass-ceramics were Ca(5)(PO4)3F (fluorapatite) and β-CaSiO(3). (β-wollastonite). m-ZrO(2) (monoclinic zirconia) declined the crystallization temperatures of glasses. t-ZrO(2) (tetragonal zirconia) increased the crystallization temperature of Ca(5)(PO4)(3)F and declined the crystallization temperature of β-CaSiO(3). t-ZrO(2) greatly increased the fracture toughness, bending strength and micro-hardness of glass-ceramics. The nanometer apatites were induced on the surface of glass-ceramic after soaking 28 days in SBF (simulated body fluid), indicating the glass-ceramic has good bioactivity. The in vitro cytotoxicity test demonstrated the glass-ceramic has no toxicity to cell. Copyright © 2014 Elsevier B.V. All rights reserved.

Nonlinear acoustic properties of the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) phosphate glasses

International Nuclear Information System (INIS)

Senin, H.B.; Sidek, H.A.A.; Saunders, G.A.

1994-01-01

From measurements of changes in transit time of 10 MHz of ultrasonic wave as a function of temperature and hydrostatic pressure, the linear and non-linear acoustic properties of the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses with compositions near to that corresponding to the metaphosphate have been determined. For each glass the second order elastic stiffness tensor components C sub ijs (SOEC) continue to increase down to 10K in a manner consistent with phonons interactions with two level systems. Measurements of the effects of hydrostatic pressure on the ultrasonic wave velocities have been used to determine the hydrostatic pressure derivatives (dC sub ij/dP) sub T,P=0 of the SOEC and (dB0 sup s)/dP) sub T,P=0 of the bulk modulus B0 sup s at room temperature (293K). For the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses, (dC sub 11/dP), (dC sub 44/dP), and (dBo/dP), are small but positives; these glasses stiffen under pressure. The elastic behaviour of these ternary glasses lies intermediate between those of (Sm sub 2 O sub 3)(P sub 2 O sub 5) sub (1-x) and (La sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses. Replacement of the Sm sup 3+ by La sup 3+ in the ternary phosphate glasses negates the acoustic mode softening. Possible sources of the different effects of La sub 3+ and Sm sub 3+ modifiers on the nonlinear acoustic properties of metaphosphate glasses are discussed

Respuesta reproductiva de ovejas de pelo sincronizadas con progesterona o prostaglandinas

OpenAIRE

Arroyo-Ledezma, Jaime; De La Torre-Barrera, Jannette; Ávila-Serrano, N. Ysac

2013-01-01

La sincronización ajusta los estros a tiempos específicos y permite usar tecnologías reproductivas. El objetivo de este estudio fue evaluar la respuesta reproductiva de 30 ovejas de pelo sincronizadas con progesterona (P4) o prostaglandinas. Las ovejas de pelo eran 5/8 Pelibuey x 2/8 Black Belly x 1/8 Dorper, de 3.5 a 4.0 años de edad, con peso promedio de 37.8 ±3.0 kg; el último parto fue 8 meses previos al experimento. Los tratamientos fueron; 1) aplicación por 11 d de 300 mg de P4 impregna...

In vitro evaluation of bioactivity of SiO2-CaO-P2O5-Na2O-CaF2-ZnO glass-ceramics

Science.gov (United States)

Riaz, Madeeha; Zia, Rehana; Saleemi, Farhat; Bashir, Farooq; Hossain, Tousif; Kayani, Zohra

2014-09-01

Zinc is an essential trace element that stimulates bone formation but it is also known as an inhibitor of apatite crystal growth. In this work addition of ZnO to SiO2-CaO-P2O5-Na2O-CaF2 glass-ceramic system was made by conventional melt-quenching technique. DSC curves showed that the addition of ZnO moved the endothermic and exothermic peaks to lower temperatures. X-ray diffraction analysis did not reveal any additional phase caused by ZnO addition and showed the presence of wollastonite and hydroxyapatite crystalline phases only in all the glass-ceramic samples. As bio-implant apatite forming ability is an essential condition, the surface reactivity of the prepared glass-ceramic specimens was studied in vitro in Kokubo's simulated body fluid (SBF) [1] with ion concentration nearly equal to human blood plasma for 30 days at 37 °C under static condition. Atomic absorption spectroscopy (AAS) was used to study the changes in element concentrations in soaking solutions and XRD, FT-IR and SEM were used to elucidate surface properties of prepared glass-ceramics, which confirmed the formation of HCAp on the surface of all glass-ceramics. It was found that the addition of ZnO had a positive effect on bioactivity of glass-ceramics and made it a potential candidate for restoration of damaged bones.

OXIDACIÓN DE p -NITROFENOL USANDO TiO 2 -ADENOSINA MONOFOSFATO I OXIDATION OF p -NITROPHENOL USING TiO 2 -ADENOSIN MONOPHOSPHATE

Directory of Open Access Journals (Sweden)

Carlos F. Rivas

2018-04-01

Full Text Available The surface of TiO2 was modified with the nucleotides adenosine 3’-monophosphate (AMP’3 and Adenosine 5’-monophosphate (AMP’5. The adsorption of nucleotides was adjusted to Langmuir ́s adsorption model, determining that the optimal condition for TiO 2 modification was at neutral pH. UV-Visible Diffuse Reflectance and IR Attenuated Total Reflectance spectra show that the chemisorption of nucleotides take placed on TiO 2 anatase. The new catalysts (TiO 2 -nucleotide improved the photodegradation of p -nitrophenol in a wide range of pH as compared with the titanium dioxide precursor. Most photoactivity was generated by using the new photocatalytic in the degradation of p -nitrophenol at pH = 6, obtaining high values for the pseudo first order kinetic constant (0.0254 min -1 and 0.0244 min -1 for TiO 2 -AMP’3 and TiO 2 -AMP’5, respectively. For all pH, the trend obtained for the photodegradation was: TiO 2 -AMP ́3 @ TiO 2 -AMP’5 > TiO 2 . Langmuir-Hinshelwood kinetics shows that the contribution of the surface reac tion rate governs the oxidation of the contaminant.

Optical Properties and Photoactivity of The Pigmentary TiO2 Doped with P2O5, K2O, Al2O3 and Sb2O3

International Nuclear Information System (INIS)

Glen, M; Grzmil, B

2011-01-01

The influence of the increasing content of antimony calculated to Sb 2 O 3 (0.08-0.57 mol%) with the constant amount of the other additives (calculated to P 2 O 5 , K 2 O, Al 2 O 3 ) on the optical properties and photostability of doped rutile has been investigated. The properties of the obtained TiO 2 -PKAlSb samples were compared to the commercial TiO 2 -PKAl composition. The starting material was the concentrated suspension of technical-grade hydrated titanium dioxide (HTD). The dopant agents' solutions were introduced to HTD. Prepared samples were calcined with gradually increasing process temperature. The XRD analysis was used to determine the rutile content in the TiO 2 samples. Optical properties of modified titanium dioxide have been determined spectrophotometrically by measuring the colour in the white (brightness, white tone) and grey system (relative lightening power, grey tone). Photostability was characterized by the white lead-glycerin test with UV-Vis light. It was observed that with the increasing content of antimony in rutile TiO 2 , doped with phosphates, potassium and aluminium, the brightness and grey tone were increasing but white tone decreased. The changes of the relative lightening power values were insignificant. Comparing the samples of TiO 2 -PKAlSb with the TiO 2 -PKAl composition it was observed that titanium dioxide doped with antimony had better white and grey tone. The increasing Sb 2 O 3 content in the TiO 2 caused the improvement of the photostability.

THE INFLUENCE OF CaO AND P2O5 OF BONE ASH UPON THE REACTIVITY AND THE BURNABILITY OF CEMENT RAW MIXTURES

Directory of Open Access Journals (Sweden)

TOMÁŠ IFKA

2012-03-01

Full Text Available The influence of CaO and P2O5 upon the reactivity of cement raw meal was investigated in this paper. Ash of bone meal containing Ca3(PO42 - 3CaO·P2O5 was used as the source of P2O5. Two series of samples with different content of the ash of bone meal were prepared. In the first series, the ash of bone was added into cement raw meal. The second series of samples were prepared by considering ash as one of CaO sources. Therefore, the total content of CaO in cement raw meal was kept constant, while the amount of P2O5 increased. These different series of samples were investigated by analyzing free lime content in the clinkers. The XRD analysis and Electron Micro Probe Analyzer analysis of the clinkers were also carried out. Two parameters were used to characterize the reactivity of cement raw meal: content of free lime and Burnability Index (BI calculated from free lime content in both series of samples burnt at 1350 ºC, 1400 ºC, 1450 ºC and 1500 ºC. According to the first parameter, P2O5 content that drastically makes worse the reactivity of cement raw meal was found at 1.11 wt.% in the first series, while this limit has reached 1.52 wt.% in the second one. According to the BI, the limit of P2O5 was found at 1.42 wt. % in the first series and 1, 61 wt.% in the second one. Furthermore, EPMA has demonstrated the presence of P2O5 in both calcium silicate phases forming thus solid solutions.

Synthesis, bioactivity and preliminary biocompatibility studies of glasses in the system CaO-MgO-SiO2-Na2O-P2O5-CaF2.

Science.gov (United States)

Tulyaganov, D U; Agathopoulos, S; Valerio, P; Balamurugan, A; Saranti, A; Karakassides, M A; Ferreira, J M F

2011-02-01

New compositions of bioactive glasses are proposed in the CaO-MgO-SiO(2)-Na(2)O-P(2)O(5)-CaF(2) system. Mineralization tests with immersion of the investigated glasses in simulated body fluid (SBF) at 37°C showed that the glasses favour the surface formation of hydroxyapatite (HA) from the early stages of the experiments. In the case of daily renewable SBF, monetite (CaHPO(4)) formation competed with the formation of HA. The influence of structural features of the glasses on their mineralization (bioactivity) performance is discussed. Preliminary in vitro experiments with osteoblasts' cell-cultures showed that the glasses are biocompatible and there is no evidence of toxicity. Sintering and devitrification studies of glass powder compacts were also performed. Glass-ceramics with attractive properties were obtained after heat treatment of the glasses at relatively low temperatures (up to 850°C).

Phase equilibrium and crystallization of glasses in Na2O-La2O3-Y2O3-P2O5 system

International Nuclear Information System (INIS)

Fedorova, E.N.; Shmatok, L.K.; Kozhina, I.I.; Barabanova, T.P.

1986-01-01

Phase diagrams of La(PO 3 ) 3 -NaPO 3 and Y(PO 3 ) 3 -NaPO 3 sections in which binary metaphosphates NaLa(PO 3 ) 4 and NaY(PO 3 ) 4 are formed have been studied. For La(PO 3 ) 3 -Y(PO 3 ) 3 and LaP 5 O 14 -YP 5 O 14 sections liquidus curves are plotted. In the pentaphosphate system the existence of solid solutions has been found. In La(PO 3 ) 3 -NaPO 3 , Y(PO 3 ) 3 -NaPO 3 , La(PO 3 ) 3 -Y(PO 3 ) 3 and LaP 5 O 17 -YP 5 O 14 pseudobinary systems in the whole concentration range glasses are formed. Pentaphosphate glasses have the least tendency to crystallization. The glasses of La(PO 3 ) 3 -NaPO 3 , Y(PO 3 ) 3 -NaPO 3 , La(PO 3 ) 3 -Y(PO 3 ) 3 sections possess high crystallizability. Crystallooptical and roentgenometric characteristics of La(PO 3 ) 3 , Y(PO 3 ) 3 , NaPO 3 , NaLa(PO 3 ) 4 and NaY(PO 3 ) 4 compounds are determined

Time-resolved pH/pO2 mapping with luminescent hybrid sensors.

Science.gov (United States)

Schröder, Claudia R; Polerecky, Lubos; Klimant, Ingo

2007-01-01

A method for simultaneous and referenced 2D mapping of pH and pO2 is described. The experimental setup combines a fast gateable CCD camera as detector, a LED as excitation light source and a single-layer sensor membrane as optical transducer. The planar optode comprises a lipophilic fluorescein derivative (lifetime approximately 5 ns) and platinum(II) mesotetrakis(pentafluorophenyl)porphyrin (approximately 70 micros in the absence of a quencher) immobilized in a hydrogel matrix. Depending on the fluorescent pH indicator, a pH transition in the physiological range (pH 6-pH 8) or in the near-basic region (pH 7-pH 9) can be achieved. The measuring scheme involves the time-resolved acquisition of images in three windows during a series of square-shaped excitation pulses. A method allowing the calculation of both parameters from these three images is presented. The pH/pO2 hybrid sensor incorporating the pH indicator 2',7'-dihexyl-5(6)-N-octadecyl-carboxamidofluorescein was characterized in detail. The pH and pO2 were determined with a maximum deviation of 0.03 pH unit and 6.5 hPa pO2, respectively, within the range of pH 7.6-pH 8.7 and 0-200 hPa pO2 in test measurements. The ionic strength (IS) cross-sensitivity was found to be relatively small (pH/IS pO2/IS pO2 images obtained in natural marine sediment are presented.

Continuous radiometric control of P/sub 2/O/sub 5/ content in phosphorite ore pulp

Energy Technology Data Exchange (ETDEWEB)

Belyakov, M A; Terent' ev, E P; Khoruzhii, A I

1976-03-01

Procedures have been developed for a continuous radiometric determination of P/sub 2/O/sub 5/ (6 to 8%) in the pulp of phosphorite ore on the basis of correlation between U and P contents in phosphorites. The pulp is piped from the classifier of one of the sections of the enrichment plant into a vertical cylindrical container whose upper part carries, mounted in its centre, a scintillator with an 80 x 80 mm NaJ(TL) crystal a FEU-82 photoelectric device. Overflowing the container edge, the pulp accumulates in the bleeding pipe and is moved on to be floated. The measuring of the gamma radiation from the pulp (with an energy of about 0.2 MeV) and the recording of the readings are carried out with a single-channel gamma spectrometer of the SP-ZM type and a self-writing KSP-type potentiometer. The sensitivity of measurements is 70 imp./sec per 1% of P/sub 2/O/sub 5/ with a 70 imp./sec background. The mean-square discrepancy as compared with chemical data is 0.3% of P/sub 2/O/sub 5/.

New perovskite-based manganite Pb2Mn2O5

International Nuclear Information System (INIS)

Hadermann, Joke; Abakumov, Artem M.; Perkisas, Tyche; D'Hondt, Hans; Tan Haiyan; Verbeeck, Johan; Filonenko, Vladimir P.; Antipov, Evgeny V.; Van Tendeloo, Gustaaf

2010-01-01

A new perovskite based compound Pb 2 Mn 2 O 5 has been synthesized using a high pressure high temperature technique. The structure model of Pb 2 Mn 2 O 5 is proposed based on electron diffraction, high angle annular dark field scanning transmission electron microscopy and high resolution transmission electron microscopy. The compound crystallizes in an orthorhombic unit cell with parameters a=5.736(1) A∼√2a p , b=3.800(1) A∼a p , c=21.562(6) A∼4√2a p (a p -the parameter of the perovskite subcell) and space group Pnma. The Pb 2 Mn 2 O 5 structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110] p (101) p crystallographic shear planes. The blocks are connected to each other by chains of edge-sharing MnO 5 distorted tetragonal pyramids. The chains of MnO 5 pyramids and the MnO 6 octahedra of the perovskite blocks delimit six-sided tunnels accommodating double chains of Pb atoms. The tunnels and pyramidal chains adopt two mirror-related configurations ('left' L and 'right' R) and layers consisting of chains and tunnels of the same configuration alternate in the structure according to an -L-R-L-R-sequence. The sequence is sometimes locally violated by the appearance of -L-L- or -R-R-fragments. A scheme is proposed with a Jahn-Teller distortion of the MnO 6 octahedra with two long and two short bonds lying in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern. - Graphical abstract: Order of the Jahn-Teller distorted MnO 6 octahedra in Pb 2 Mn 2 O 5 . Two long and two short bonds lie in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern.

Heat treatment of Na2O-CaO-P2O5-SiO2 bioactive glasses: densification processes and postsintering bioactivity.

Science.gov (United States)

Sola, A; Bellucci, D; Raucci, M G; Zeppetelli, S; Ambrosio, L; Cannillo, V

2012-02-01

Because of their excellent bioactivity, bioactive glasses are increasingly diffused to produce biomedical devices for bone prostheses, to face the dysfunctions that may be caused by traumatic events, diseases, or even natural aging. However, several processing routes, such as the production of scaffolds or the deposition of coatings, include a thermal treatment to apply or sinter the glass. The exposure to high temperature may induce a devetrification phenomenon, altering the properties and, in particular, the bioactivity of the glass. The present contribution offers an overview of the thermal behavior and properties of two glasses belonging to the Na2O-CaO-P2O5-SiO2 system, to be compared to the standard 45S5 Bioglass(®). The basic goal is to understand the effect of both the original composition and the thermal treatment on the performance of the sintered glasses. The new glasses, the one (BG_Na) with a high content of Na2O, the other (BG_Ca) with a high content of CaO, were fully characterized and sintering tests were performed to define the most interesting firing cycles. The sintered samples, treated at 880°C and 800°C respectively, were investigated from a microstructural point of view and their mechanical properties were compared to those of the bulk (not sintered) glass counterparts. The effect of sintering was especially striking on the BG_Ca material, whose Vickers hardness increased from 598.9 ± 46.7 HV to 1053.4 ± 35.0 HV. The in vitro tests confirmed the ability of the glasses, both in bulk and sintered form, of generating a hydroxyapatite surface layer when immersed in a simulated body fluid. More accurate biological tests performed on the sintered glasses proved the high bioactivity of the CaO-rich composition even after a heat treatment. Copyright © 2011 Wiley Periodicals, Inc.

Effect of Sol-Gel Ageing Time on Three Dimensionally Ordered Macroporous Structure of 80SiO2-15CaO-5P2O5 Bioactive Glasses

Directory of Open Access Journals (Sweden)

Thanida CHAROENSUK

2014-04-01

Full Text Available Three dimensionally ordered macroporous bioactive glasses (3DOM-BGs, namely 80SiO2-15CaO-5P2O5, were synthesized by sol-gel method. PMMA colloidal crystals and non-ionic block copolymers P123 were used as cotemplates. The amorphous 3DOM-BGs had skeletal walls enclosing macropores. Such structure resulted from octahedral and tetrahedral holes of the face-centered cubic (fcc closest packed PMMA templates and windows interconnecting through macropores network. The thicknesses of the walls were around 50 nm – 80 nm and the windows were 90 nm – 110 nm in diameter. These wall thickness is increased by with an increase in ageing time up to 24 h and  then gradually reduced with further increase in aging time. Vibration bands of Si–O–Si and P–O were evident in infrared spectra which are in agreement with EDS spectra indicating Si, P and Ca compositions. After in vitro bioactivity testing by soaking 3DOM-BGs in simulated body fluid at 37 °C, the crystallization of amorphous calcium phosphate layers compatible to the bone component of hydroxyl carbonate apatite were rapidly formed within 3 h. These results indicated that these 3DOM-BGs resembled ideal bone implant materials.DOI: http://dx.doi.org/10.5755/j01.ms.20.1.4755

Radiometric analysis of P/sub 2/O/sub 5/ content in phosphorites from common radioactivity

Energy Technology Data Exchange (ETDEWEB)

Belyakov, M A; Anderzhanov, V N; Ermolaeva, G M [Gosudarstvennyj Nauchno-Issledovatel' skij Inst. Gornokhimicheskogo Syr' ya, Moscow (USSR)

1983-01-01

A radiometric analysis of P/sub 2/O/sub 5/ content in phosphorites from natural radioactivity is described. A correlation between contents of phosphorus and uranium in phosphorites is a principle of the method. Potassium and thorium are interfering elements. Total radioactivity is proposed to be measured in the 0.1 to 0.6 MeV gamma radiation channel. Measurements in the channel provide a decrease in the potassium and thorium contributions to the total radioactivity, which increases an accuracy of P/sub 2/O/sub 5/ quantitative determination.

Effect of PbO on the elastic behavior of ZnO–P2O5 glass systems

Directory of Open Access Journals (Sweden)

H.A.A. Sidek

Full Text Available A series of ternary phosphate glasses in the form of 40(P2O5–(60 − xZnO–xPbO and 50(P2O5–(50 − xZnO–xPbO where x = 0–60 mol%, have been successfully prepared by conventional melt quenching technique. Both longitudinal and shear ultrasonic velocities were measured in different compositions of PbO using the MBS8000 ultrasonic data acquisition system at 10 MHz frequency and at room temperature. The ultrasonic velocity data, the density and the calculated elastic moduli are found to be composition dependent and discussed in terms of PbO modifiers. The correlation of elastic moduli with the atomic packing density of these glasses was discussed. To predict the compositional dependence of elastic moduli of this glass system, the interpretation of the variation in the experimental elastic behavior observed has been studied based on various of the bond compression and the Makishima–Mackenzie models. Keywords: Elastic moduli, Glasses, Zinc phosphate, Bond compression, Makishima–Mackenzie models

Structural study of Al2O3-Na2O-CaO-P2O5 bioactive glasses as a function of aluminium content.

Science.gov (United States)

Smith, J M; King, S P; Barney, E R; Hanna, J V; Newport, R J; Pickup, D M

2013-01-21

Calcium phosphate based biomaterials are extensively used in the context of tissue engineering: small changes in composition can lead to significant changes in properties allowing their use in a wide range of applications. Samples of composition (Al(2)O(3))(x)(Na(2)O)(0.11-x)(CaO)(0.445)(P(2)O(5))(0.445), where x = 0, 0.03, 0.05, and 0.08, were prepared by melt quenching. The atomic-scale structure has been studied using neutron diffraction and solid state (27)Al MAS NMR, and these data have been rationalised with the determined density of the final glass product. With increasing aluminium concentration the density increases initially, but beyond about 3 mol. % Al(2)O(3) the density starts to decrease. Neutron diffraction data show a concomitant change in the aluminium speciation, which is confirmed by (27)Al MAS NMR studies. The NMR data reveal that aluminium is present in 4, 5, and 6-fold coordination and that the relative concentrations of these environments change with increasing aluminium concentration. Materials containing aluminium in 6-fold coordination tend to have higher densities than analogous materials with the aluminium found in 4-fold coordination. Thus, the density changes may readily be explained in terms of an increase in the relative concentration of 4-coordinated aluminium at the expense of 6-fold aluminium as the Al(2)O(3) content is increased beyond 3 mol. %.

Effect of magnesia on the degradability and bioactivity of sol-gel derived SiO2-CaO-MgO-P2O5 system glasses.

Science.gov (United States)

Ma, J; Chen, C Z; Wang, D G; Jiao, Y; Shi, J Z

2010-11-01

Mesoporous 58SiO(2)-(38-x)CaO-xMgO-4P(2)O(5) glasses (where x=0, 5, 10 and 20 mol%) have been prepared by the sol-gel synthesis route. The effects of the substitution of MgO for CaO on glass degradation and bioactivity were studied in tris-(hydroxymethyl)-aminomethane and hydrochloric acid buffer solution (Tris-HCl) and simulated body fluid (SBF), respectively. It is observed that the synthesized glasses with various MgO contents possess the similar textural properties. The studies of in vitro degradability and bioactivity show that the rate of glass degradation gradually decreases with the increase of MgO and the formation of apatite layer on glass surface is retarded. The influences of the composition upon glass properties are explained in terms of their internal structures. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Escore US7 modificado na avaliação de sinovite em pacientes com artrite reumatoide inicial

Directory of Open Access Journals (Sweden)

José Alexandre Mendonça

2014-07-01

Full Text Available Objetivo: Avaliar o escore US7 modificado (escore MUS7 SIN na avaliação de pacientes com artrite reumatoide inicial (ARI. Além disso, foram examinados recessos dorsais e palmares dos punhos, bem como pequenas articulações das mãos e dos pés, para o diagnóstico de sinovite, mediante uma avaliação global das articulações. Métodos: A amostra do estudo compreendeu 32 pacientes tratados para artrite, com 13 meses como duração média da doença. Foi utilizado um aparelho de ultrassonografia (US com transdutor de alta frequência. As mãos dos participantes também foram radiografadas e analisadas pelo escore de Larsen. Resultados: Nas 832 articulações examinadas, detectou-se sinovite em 173 (20,79%, tenossinovite em 22 (4,91% e erosões em três (1,56%. A sinovite foi predominantemente detectada no recesso dorsal (73,38% das articulações MCF e IFP, quando comparado com o recesso palmar (26%. A presença de sinovite nas articulações avaliadas teve correlação com os resultados clínicos (HAQ-DI, DAS28, laboratoriais (anti-PCC, FR, PCR e ultrassonográficos (r = 0,37 a r = 0,42; p = 0,04 a p = 0,003. Encontramos correlação do escore MUS7 SIN para US na técnica da escala de cinzas (gray scale ou na técnica de Doppler de amplitude (power Doppler com os valores do instrumento DAS28 (PCR (r = 0,38; p = 0,0332 e com os resultados da PCR (r = 0,39; p = 0,0280, respectivamente. Conclusão: O recesso dorsal, o punho e as pequenas articulações podem ser considerados como locais importantes para a detecção de sinovite pelo escore MUS7 SIN em pacientes com ARI.

Measuring interstitial pH and pO2 in mouse tumors.

Science.gov (United States)

Jain, Rakesh K; Munn, Lance L; Fukumura, Dai

2013-07-01

This protocol outlines methods to measure two extravascular parameters, interstitial pH and partial pressure of oxygen (pO2), in mouse tumors. The method for measuring interstitial pH uses fluorescence ratio imaging microscopy (FRIM) of the pH-sensitive fluorescent dye 2',7'-bis-(2-carboxyethyl)-5,6-carboxyfluorescein (BCECF). The method for measuring interstitial pO2 is based on the oxygen-dependent quenching of the phosphorescence of albumin-bound palladium meso-tetra(4-carboxyphenyl)porphyrin, and can be used to measure microvascular as well as interstitial pO2. In addition, the two methods can be used sequentially to measure both pH and pO2 in the same tissues.

In-vitro study of copper doped SiO2-CaO-P2O5 system for bioactivity and antimicrobial properties

Science.gov (United States)

Kaur, Kulwinder; Singh, K. J.; Anand, Vikas; Kaur, Harpreet; Arora, Daljit Singh

2015-08-01

Samples of the xCuO-(45-x)CaO-10P2O5-45SiO2 system (x varies from 0 to 4 mole%) have been synthesized for application as biomaterials to slow or inhibit the growth of living organisms (fungi and other pathogenic microorganisms) by the combination of sol-gel and co-precipitation processes. Prepared samples have been characterized by X-Ray Diffraction, Fourier Transform Infra-Red and Field Emission Scanning Electron Microscopy techniques before and after immersion in simulated body fluid. Antimicrobial activity of samples has been investigated against Staphylococcus aureus. Releasing of Cu2+and other ions in the simulated body fluid has been determined by Atomic Absorption Spectroscopy to ensure the use of prepared material as biomaterial with good antibacterial properties.

Correlation Between Electrical Conductivity and Catalytic Property in 78V{sub 2}O{sub 5}–15P{sub 2}O{sub 5}–7B{sub 2}O{sub 3} Glass Containing Fe{sub 2}O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Jeong, Hwa-Jin; Kim, Jong-hwan; Ryu, Bong-Ki [Pusan National University, Busan (Korea, Republic of)

2016-12-15

In this study, we established a correlation between the electrical conductivity and catalytic properties of vanadium borophosphate glass containing Fe{sub 2}O{sub 3}. Glasses were synthesized in the 78V{sub 2}O{sub 5}–15P{sub 2}O{sub 5}–7B{sub 2}O{sub 3} ternary-system containing x mol% Fe{sub 2}O{sub 3} (x = 1, 5, 7.5, and 10). Electrical conductivity was measured at 45 ℃ for samples heat-treated at 340 ℃ for 12 h. To examine catalytic effects, we used TGA measurements of a mixture of fatty acid and sample powders. Fourier transform infrared spectroscopy (FTIR) was used to analyze the structural changes after crystallization, while X-ray photoelectron spectroscopy (XPS) analysis indicated changes with different valence state ions. X-ray diffraction (XRD) analysis of the structure array verified these inferred changes. Conductivity and catalytic effects are discussed in relation to the migration of vanadate ions and iron ions with different valence states due to the increase crystallinity.

Emprego do método Z-Buffer modificado na detecção de oclusões de edificações para geração de ortoimagens verdadeiras

Directory of Open Access Journals (Sweden)

Marcis Gualberto Mendonça Júnior

Full Text Available O uso de modelos digitais de superfície (MDS aliado a existência de áreas oclusas faz com que, na geração de ortoimagens verdadeiras, ocorra a formação de um fenômeno conhecido como "duplo mapeamento". Para evitá-lo é necessária à detecção das áreas oclusas existentes, e o método mais utilizado na atualidade tem origem na Computação Gráfica, e se denomina Método Z-Buffer. Esse artigo apresenta a implementação de algoritmos para ortorretificação de fotografias aéreas, com emprego do método inverso, e para detecção de áreas oclusas, com base em uma modificação do Z-Buffer, denominada de Método Z-Buffer Modificado. Como áreas de estudo foram utilizadas duas áreas da cidade de Curitiba - PR, que possuíam recobrimento fotogramétrico e MDS disponíveis. Os resultados obtidos possibilitaram identificar o comportamento do Método Z-Buffer Modificado na detecção das áreas oclusas, e como sua principal limitação, denominada de Porção M, influência na supressão dos Duplos Mapeamentos formados durante a geração das ortoimagens verdadeiras.

Avaliação do uso do anel endocapsular modificado em casos de subluxação traumática do cristalino Evaluation of the modified capsular tension ring in cases of traumatic lens subluxation

Directory of Open Access Journals (Sweden)

Daniela Meira Villano Marques

2007-10-01

Full Text Available OBJETIVO: Avaliar o comportamento do anel modificado de tensão capsular em cataratas traumáticas com subluxação, analisando a acuidade visual, centração do saco capsular, pseudofacodonese, seguimento pós-operatório, e complicações intra e pós-operatórias. LOCAL: Cincinnati Eye Institute, Cincinnati, Ohio, USA. MÉTODOS: Vinte e dois olhos de 22 pacientes com perda traumática de suporte zonular foram submetidos à facoemulsificação utilizando lente intra-ocular de câmara posterior e o implante do anel capsular modificado. O exame pré-operatório incluiu melhor acuidade visual corrigida (MAVC, a presença ou ausência de facodonese, descentração do cristalino e prolapso vítreo. A avaliação pós-operatória incluiu MAVC, presença de pseudofacodonese, centração do implante, necessidade de vitrectomia e outras complicações. RESULTADOS: Vinte e um olhos (95,45% tiveram melhora da MAVC. O exame pré-operatório revelou facodonese em 11 olhos (50% e nenhum olho apresentou pseudofacodonese. No exame pré-operatório, a descentração sintomática estava presente em 10 olhos (45,45%. Todos os olhos apresentaram centração do complexo saco capsular/LIO no pós-operatório. Prolapso vítreo foi diagnosticado antes da cirurgia em 9 olhos (40,90% e a vitrectomia foi necessária em 11 olhos (50%. CONCLUSÃO: O uso do anel modificado de tensão capsular resultou em boa centração do complexo saco capsular/lente intra-ocular nos olhos estudados com catarata traumática e perda de suporte zonular.PURPOSE: To evaluate the behavior of the modified capsular tension ring (MCTR in traumatic subluxated cataracts analyzing the visual acuity, centration of the capsular bag, pseudophacodonesis, postoperative follow-up and intra- and postoperative complications. SETTING: Cincinnati Eye Institute, Cincinnati, Ohio, USA. METHODS: Twenty-two eyes of 22 patients with traumatic loss of zonular support had phacoemulsification using PCIOL and MCTR

Effects of Al/P composition ratio on the crystallization of MgO-CaO-Al203-SiO2-P2O5 bioglass-ceramic system

Energy Technology Data Exchange (ETDEWEB)

Wu, Shihching; Hon, Minhsiung [National Cheng-Kung Univ., Taiwan (Taiwan, Province of China)

1993-06-01

Effects of Al/P composition ratio on the crystallization of apatite and anorthite were investigated by differential thermal analysis ( DTA ) using series of glasses with the nominal composition of 3.0wt% MgO, 35.0wt% CaO, 41.4wt% SiO2 and 20.6wt%(Al2O3+P205). With the decrease of Al/P ratio, the activation energy for apatite crystallization is decreased and the apatite exotherm is shifted to the lower temperature. On the other hand, anorthite crystallized from the specimen surface, the activation energy for anorthite is increased with the decrease of Al/P ratio, however the exotherm is not shifted significantly. Roughly estimated values of Avrami parameters, n, which is related to the directionality of crystal growth, for apatite and anorthite have been 2 and 1 respectively. This had shown that apatite implies bulk crystallization and anorthite signifies surface crystallization. Also the SEM observations of the crystals revealed that there was one dimensional crystal growth for anorthite and spherulitic growth for apatite. 17 refs., 6 figs., 2 tabs.

Synthesis, structural, spectroscopic and thermoanalytical study of sol–gel derived SiO{sub 2}–CaO–P{sub 2}O{sub 5} gel and ceramic materials

Energy Technology Data Exchange (ETDEWEB)

Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, via Roma 29, Aversa (CE) (Italy); Dell’Era, Alessandro [Department D.M.E., ‘Guglielmo Marconi’ University, via Plinio 44, Roma (Italy); Vecchio Ciprioti, Stefano, E-mail: stefano.vecchio@uniroma1.it [Department S.B.A.I., Sapienza University of Rome, via del Castro Laurenziano 7, Roma (Italy)

2016-02-10

Highlights: • Four different SiO{sub 2}–CaO–P{sub 2}O{sub 5} gel-glasses were synthesized by the sol–gel method. • FTIR, XRD, SEM-EDS and TG/DTA techniques were used to fully characterize the gels. • Integral isoconversional OFW method was used to study dehydration kinetics. • Appropriate temperatures of 600 and 1200 °C were chosen to thermally treat them. • All amorphous gels at 1200 °C crystallize as wollastonite and pseudowollastonite. - Abstract: In the present work bioactive powders of the ternary SiO{sub 2}·CaO·P{sub 2}O{sub 5} systems, which differ in the Ca/P molar ratio, were synthesized by means of a sol–gel route, using tetraethyl orthosilicate (TEOS, Si(OC{sub 2}H{sub 5}){sub 4}), calcium nitrate tetrahydrate (Ca(NO{sub 3}){sub 2}·4H{sub 2}O) and triethyl phosphate (TEP, OP(OC{sub 2}H{sub 5}){sub 3}) as precursors of SiO{sub 2}, CaO and P{sub 2}O{sub 5}, respectively. In order to investigate the influence of the relative amount of each phase (in this study: SiO{sub 2}, CaO and P{sub 2}O{sub 5}) the thermal properties of the synthesized gel-glass materials were studied as a function of the Ca/P molar ratio using thermogravimetric and differential thermal analysis (TG/DTA). After dehydration (in a single step), described from a kinetic point of view as a simple water evaporation without rupture of chemical bonds, all gels undergo a complex multi-step decomposition with endo and exothermic effects, followed by crystallization of calcium silicate phases at about 950 °C. Furthermore, Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) and Scanning Electron Microscopy, coupled with energy dispersive spectroscopy (SEM/EDS), allowed us to detect the chemical modifications induced by modifying the Ca/P molar ratio and the sintering. This process is obtained by thermal treatment of the gel-glass precursors after analyzing their thermal behavior in the temperature range 600–1000 °C, with the aim to convert them into

Investigating the Effect of Glass Ion Release on the Cytocompatibility, Antibacterial Eflcacy and Antioxidant Activity of Y2O3 / CeO2 doped SiO2-SrO-Na2O glasses

Directory of Open Access Journals (Sweden)

Placek L. M.

2018-02-01

Full Text Available The effect on ion release and cytocompatibility of Yttrium (Y and Cerium (Ce are investigated when substituted for Sodium (Na in a 0.52SiO2-0.24SrO-0.24-Na2OMOglass series (where MO= Y2O3 or CeO2. Glass leaching was evaluated through pH measurements and Inductive Coupled Plasma-Optical Emission Spectrometry (ICP-OES analysiswhere the extract pH increased during incubation (11.2 - 12.5. Ion release of Silicon (Si, Na and Strontium (Sr from the Con glass was at higher than that of glasses containing Y or Ce, and reached a limit after 1 day. Ion release from Y and Ce containing glasses reached a maximum of 1800 μg/mL, 1800 μg/mL, and 10 μg/mL for Si, Na, and Sr, respectively. Release of Y and Cewas below the ICP- OES detection limit 75% of bacteria at a 9% extract concentration. Antioxidant capacity (mechanism for neuroprotection was evaluated using the ABTS assay. All glasses had inherent radical oxygen species (ROS scavenging capability with Con reaching 9.5 mMTE.

Dosimetric UV Exposure Effect on the Optical Properties of Ag2O Doped P2O5-ZnO-CuO Glass

Directory of Open Access Journals (Sweden)

K. S. Al Mugren

2016-01-01

Full Text Available Silver phosphate glass types within composition 60P2O5-30ZnO-10CuO-100000 ppm Ag2O were prepared by melt-quenching technique. The optical properties of these glass types were studied under UV exposure at different times, 0, 20, 80, 105, and 115 minutes. The optical absorbance spectra were measured in the range of wavelength from 190 to 3200 nm. The absorbance bandwidth decreases with increasing the time of UV exposure. The optical energy gap, Eg, linear refractive index, n, ratio between molar refraction, Rm, and molar volume, Vm, and metallization criterion (M were estimated. The value of Eg decreases from 2.132 to 1.91 eV with increasing the time of UV exposure from 0 to 115 min. Otherwise n value and metallization increase with increase in the time of UV exposure. The results indicated that these glass types are promising for using an ultraviolet radiation dosimeter.

Effects of Fe{sub 2}O{sub 3} content on ionic conductivity of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} glasses and glass-ceramics

Energy Technology Data Exchange (ETDEWEB)

Mohaghegh, E., E-mail: elnaz.mohaghegh@gmail.com [Department of Materials Science and Engineering, Sharif University of Technology, Tehran, 11155-9466 (Iran, Islamic Republic of); Nemati, A. [Department of Materials Science and Engineering, Sharif University of Technology, Tehran, 11155-9466 (Iran, Islamic Republic of); Eftekhari Yekta, B. [Ceramic Division, School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, 16846-13114 (Iran, Islamic Republic of); Banijamali, S. [Ceramic Division, Materials & Energy Research Center, Alborz, 31787-316 (Iran, Islamic Republic of)

2017-04-01

In this study, Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}-x(Fe{sub 2}O{sub 3}) (x = 0, 2.5, 5 and 7.5 weight part) glass and glass-ceramics were synthesized through conventional melt-quenching method and subsequently heat treatment. Glass samples were studied by UV–visible spectroscopy and crystallized samples were characterized by differential thermal analysis, X-ray diffractometry and field emission scanning electron microscopy. Besides, electrical properties were examined according to the electrochemical impedance spectroscopy techniques. Experimental optical spectra of the Fe{sub 2}O{sub 3}-doped glasses revealed strong UV absorption band in the range of 330–370 nm, which were attributed to the presence of Fe{sup 3+} ions. The major crystalline phase of the fabricated glass-ceramics was LiTi{sub 2}(PO{sub 4}){sub 3}. However, Li{sub 3}PO{sub 4} was also identified as the minor one. Considering the impedance spectroscopy studies, ionic conductivity of Fe{sub 2}O{sub 3} containing glasses was higher than that of the base glass. Additionally, the maximum bulk ionic conductivity of 1.38 × 10{sup −3} S/cm was achieved as well as activation energy as low as 0.26 eV at room temperature for x = 5. - Highlights: • Bulk and total ionic conductivity was extracted by using impedance spectroscopy. • Ionic conductivity of the studied glasses and glass-ceramics increased with increasing Fe{sub 2}O{sub 3} content. • The highest bulk ionic conductivity at room temperature was found to be 1.38 × 10{sup −3} S/cm for GC{sub 5}.

Structural and magnetic properties of SiO{sub 2}-CaO-Na{sub 2}O-P{sub 2}O{sub 5} containing BaO-Fe{sub 2}O{sub 3} glass-ceramics

Energy Technology Data Exchange (ETDEWEB)

Leenakul, W.; Kantha, P.; Pisitpipathsin, N. [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Rujijanagul, G.; Eitssayeam, S. [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Pengpat, K., E-mail: kamonpan.p@cmu.ac.th [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand)

2013-01-15

The incorporation method was employed to produce bioactive glass-ceramics from the BaFe{sub 12}O{sub 19}-SiO{sub 2}-CaO-Na{sub 2}O-P{sub 2}O{sub 5} glass system. The ferrimagnetic BaFe{sub 12}O{sub 19} was first prepared using a simple mixed oxide method, where the oxide precursors of 45S5 bioglass were initially mixed and then melted to form glass. The devitrification of Na{sub 3}Ca{sub 6}(PO{sub 4}){sub 5} and Fe{sub 3}O{sub 4} was observed in all of the quenched glass samples. The glass samples were then subjected to a heat treatment schedule for further crystallization. It was found that the small traces of BaFe{sub 12}O{sub 19} phases started to crystallize in high BF content samples of 20 and 40 wt%. These samples also exhibited good magnetic properties comparable to that of other magnetic glass-ceramics. The bioactivity of the BF glass-ceramics improved with increasing BF content as was evident by the formation of bone-like apatite layers on the surface of all of the glass-ceramics after soaking in SBF for 14 days. The results support the use of these bioactive glass-ceramics for hyperthermia treatment within the human body. - Highlights: Black-Right-Pointing-Pointer BF addition improves the magnetic property and bioactivity of 45S5 bioglasses. Black-Right-Pointing-Pointer Bioglass-ceramics exhibited soft magnetic properties with Mr=14.850 emu/g. Black-Right-Pointing-Pointer Magnetic property can be enhanced by crystallization of BF in 45S5 bioglasses.

Electron excitation cross sections for the 2s(2)2p(3)4S(O) -- 2s(2)2p(3)2D(O) (forbidden) and 4S(O) -- 2s2p(4) 4P (resonance) transitions in O II

Science.gov (United States)

Zuo, M.; Smith, Steven J.; Chutjian, A.; Williams, I. D.; Tayal, S. S.; Mclaughlin, Brendan M.

1995-01-01

Experimental and theoretical excitation cross sections are reported for the first forbidden transition 4S(O) -- 2S(2)2p(3) 2D(O) (lambda-lambda 3726, 3729) and the first allowed (resonance) transition 4S(O) -- 2s2p(4) 4P(lambda-833) in O II. Use is made of electron energy loss and merged-beams methods. The electron energy range covered is 3.33 (threshold) to 15 eV for the S -- D transition, and 14.9 (threshold) to 40 eV for the S -- P transition. Care was taken to assess and minimize the metastable fraction of the O II beam. An electron mirror was designed and tested to reflect inelastically backscattered electrons into the forward direction to account for the full range of polar scattering angles. Comparisons are made between present experiments and 11-state R-matrix calculations. Calculations are also presented for the 4S(O) -- 2s(2)2p(3)2P(O) (lambda-2470) transition.

EFECTO DE RECUBRIMIENTO DE ALMIDÓN DE YUCA Y CERA DE ABEJAS SOBRE EL CHONTADURO

Directory of Open Access Journals (Sweden)

ZULMA LIZETH TOSNE

Full Text Available El chontaduro tiene alto valor nutritivo y es uno de los frutos más completos como alimento, sin embargo, es altamente perecedero lo que lo hace susceptible a sufrir daños que afectansu calidad y aceptación. Por lo anterior, se evaluó el efecto de un recubrimiento a base de almidón de yuca (variedad SM 707-17 modificado enzimáticamente y cera de abejas sobre lapérdida de peso, la firmeza, los grados Brix, la acidez titulable y la tasa respiratoriade frutos variedad roja en etapa pos cosecha, almacenados bajo condiciones ambientales (18oC y 77,7% de humedad relativa. Se usó un diseño completamente al azar con cuatro tratamientos: T1 muestra testigo, T2 con 0,5% de cera de abejas, T3 con 1,5% de cera de abejas, T4 con 2,5% de cera de abejas, todos adicionados de almidón de yuca modificado (al 4%, glicerina y carboximetilcelulosa (CMC. Se realizaron 3 réplicas y los resultados se sometieron a un análisis de varianza (α=0,05 usando el software SPSS 19, con un nivel de significancia (p<0,05 en las variables de respuesta, identificando T3 como el tratamiento con mayor incidencia, manteniendo las condiciones de calidad del chontaduro por un periodo adicional de 4 días.

pO2 measurements in arteriolar networks.

Science.gov (United States)

Torres Filho, I P; Kerger, H; Intaglietta, M

1996-03-01

Previous studies from our laboratory have shown that the average arteriolar pO2 in the hamster skinfold preparation is lower than arterial systemic pO2. In the present work we tested the hypothesis that there is a longitudinal gradient of pO2 along precapillary vessels. Experiments were performed in Syrian golden hamsters bearing a dorsal skin chamber. The oxygen-dependent quenching of phosphorescence of palladium-porphyrin complexes was used to measure intravascular pO2 in the microcirculation. Arterioles were classified in four orders according to their position in the network, first-order vessels being the entrance points. Simultaneous determinations of diameter (D), red blood cell velocity, and systemic blood gases were also made. There was a significant fall of pO2 between vessels of different orders. First-order arterioles (mean D = 64 microns) had pO2 of 51.8 +/- 9.8 mm Hg (mean +/- SD) which was equivalent to approximately equal to 73% of the arterial systemic pO2. Within the arteriolar network, further decreases of intravascular pO2 were measured, leading to a pO2 of 34.0 +/- 7.9 mm Hg in terminal arterioles (mean D = 7.7 microns). In some vessels pO2 was measured in different positions of the same arteriole. The average longitudinal arteriolar oxygen saturation gradient was 3.4 +/- 0.4 delta %/mm (range 0.8-7.2). A significant and positive correlation was found between pO2 and microhemodynamic parameters when arterioles were grouped according to their order. This relation was not significant for venules which showed a mean pO2 of 30.8 +/- 10.8 mm Hg. Tissue pO2 averaged 24.6 +/- 5.8 mm Hg. We conclude that: (1) There is an oxygen loss in arterial vessels larger than 100 micrograms in diameter, (2) arteriolar pO2 in this preparation depends on the position of the vessel within the network, (3) a substantial portion of oxygen delivery to the hamster skin is provided by the arteriolar network, and (4) only a small pO2 gradient exists between terminal

Efficient charge injection in p-type polymer field-effect transistors with low-cost molybdenum electrodes through V2O5 interlayer.

Science.gov (United States)

Baeg, Kang-Jun; Bae, Gwang-Tae; Noh, Yong-Young

2013-06-26

Here we report high-performance polymer OFETs with a low-cost Mo source/drain electrode by efficient charge injection through the formation of a thermally deposited V2O5 thin film interlayer. A thermally deposited V2O5 interlayer is formed between a regioregular poly(3-hexylthiophene) (rr-P3HT) or a p-type polymer semiconductor containing dodecyl-substituted thienylenevinylene (TV) and dodecylthiophene (PC12TV12T) and the Mo source/drain electrode. The P3HT or PC12TV12T OFETs with the bare Mo electrode exhibited lower charge carrier mobility than those with Au owing to a large barrier height for hole injection (0.5-1.0 eV). By forming the V2O5 layer, the P3HT or PC12TV12T OFETs with V2O5 on the Mo electrode exhibited charge carrier mobility comparable to that of a pristine Au electrode. Best P3HT or PC12TV12T OFETs with 5 nm thick V2O5 on Mo electrode show the charge carrier mobility of 0.12 and 0.38 cm(2)/(V s), respectively. Ultraviolet photoelectron spectroscopy results exhibited the work-function of the Mo electrode progressively changed from 4.3 to 4.9 eV with an increase in V2O5 thickness from 0 to 5 nm, respectively. Interestingly, the V2O5-deposited Mo exhibits comparable Rc to Au, which mainly results from the decreased barrier height for hole carrier injection from the low-cost metal electrode to the frontier molecular orbital of the p-type polymer semiconductor after the incorporation of the transition metal oxide hole injection layer, such as V2O5. This enables the development of large-area, low-cost electronics with the Mo electrodes and V2O5 interlayer.

Study of new CaO-SiO/sub 2/-P/sub 2/O/sub 5/CaF/sub 2/ bioactive ceramic

International Nuclear Information System (INIS)

Shamim, A.; Arif, I.; Siddiqi, S.A.; Shah, W.A.

1997-01-01

A new bioactive glass ceramic having, composition 48CaO-32SiO/sub 2/-16P/sub 2/O/sub 5/-4CaF/sub 2/ has been developed and studied for its physical and biological properties. Like the natural bone in which spastic particles are reinforced by collagen, in the present glass-ceramic, fine grained ceramic particles embedded in a glass matrix. X-ray diffraction analysis reveals wollastonite and oxyfluorapatite as the crystalline part of the glass-ceramic. Scanning electron microscopy of the samples has been carried out to see the grain size and grain distribution. Bending and compressive strength of the glass ceramic have been carried out to measured and found to be 208.60 m.Pa and 788.61 M.Pa respectively. Growth of apatite layer, which is responsible for bonding the broken part of a natural bone, on a bioactive glass-ceramic in a simulated body fluid has been studied. A small rectangular piece of this glass-ceramic has also been implanted successfully in a dog's tibia. (author)

Aplicabilidade da metodologia de reação de polimerase em cadeia em tempo real na determinação do percentual de organismos geneticamente modificados em alimentos Applicability of the real-time polymerase chain reaction based-methods in quantification of genetically modified organisms in foods

OpenAIRE

Natália Eudes Fagundes de Barros; Edna Maria Morais Oliveira; Victor Augustus Marin

2008-01-01

A detecção de organismos geneticamente modificados na cadeia alimentar é um aspecto importante para todos os assuntos envolvidos no controle de matéria-prima, na indústria de alimentos e na distribuição. A rotulagem e a rastreabilidade de organismos geneticamente modificados são questões atuais que são consideradas para o comércio e a regulamentação. Atualmente, a rotulagem de alimentos processados contendo material transgênico detectável é exigida pela legislação brasileira. O governo brasil...

Investigation of non linear optical properties in glasses. Case of the Na2O - TiO2 - P2O5 system

International Nuclear Information System (INIS)

Duchesne, Claire

1993-01-01

The research thesis is part of collaborative work between research laboratories on optical nonlinearities in glasses. The first part proposes an overview, in terms of optics as well as solid chemistry, of relevant criteria for the design of such materials which leads to the choice of the Na 2 O-TiO 2 -P 2 O 5 system. Characterizations means are then presented, notably X ray absorption spectroscopy (Extended X-Ray Absorption Fine Structure spectroscopy or EXAFS, and X-ray Absorption Near Edge Structure or XANES) for the glass structure analysis, and Kerr-type nonlinearity measurements by means of a Mach-Zender interferometer modified for nonlinear optics and operating in the sub-picosecond range. The next part highlights the influence of structure entities formed about the titanium atom on the noticed optical nonlinearities. The author finally reports an attempt of modelling of the linear and nonlinear response in mineral glasses under the effect of an electric perturbation [fr

Evaluation of P{sub 2}O{sub 5} distribution inside the main clinker minerals by the application of EPMA method

Energy Technology Data Exchange (ETDEWEB)

Ifka, Tomáš, E-mail: tomas.ifka@savba.sk [Institute of Construction and Architecture, Slovak Academy of Sciences, Dúbravská cesta, 9845 03 Bratislava 45 (Slovakia); Palou, Martin [Institute of Construction and Architecture, Slovak Academy of Sciences, Dúbravská cesta, 9845 03 Bratislava 45 (Slovakia); Baraček, Jan; Šoukal, František; Boháč, Martin [Faculty of Chemistry, Brno University of Technology, Purkyňova 464/118, Brno 612 00 (Czech Republic)

2014-05-01

The formation of Portland clinker phases has taken place in thermodynamically non-equilibrium state between macro-oxides CaO, SiO{sub 2}, Al{sub 2}O{sub 3}, Fe{sub 2}O{sub 3} and MgO from raw meal and P{sub 2}O{sub 5} from bone meal. The paper deals with the study of clinker minerals as solid solutions with P{sub 2}O{sub 5} during the clinkerization of raw mixture containing bone meal (BM). The ash of BM has contributed as a raw material to the formation of different clinker phases. Electron probe microanalysis (EPMA) method was used to determine the preferential distribution of P{sub 2}O{sub 5} inside calcium silicate phases and its influence upon C{sub 2}S/C{sub 3}S ratio. Basing on these results, composition of solid solution of C{sub 2}S and C{sub 3}S was established.

BaO-Nd2O3-CuOx subsolidus equilibria under carbonate-free conditions at pO2=100 Pa and at pO2=21 kPa

International Nuclear Information System (INIS)

Wong-Ng, W.; Cook, L.P.; Suh, J.; Coutts, R.; Stalick, J.K.; Levin, I.; Huang, Q.

2003-01-01

Subsolidus phase equilibria of the BaO-Nd 2 O 3 -CuO x system at pO 2 =100 Pa (0.1% O 2 volume fraction, 810 deg. C) and at pO 2 =21 kPa (21% O 2 volume fraction, 930 deg. C) have been investigated by applying controlled-atmosphere methods to minimize the presence of carbonate and CO 2 and H 2 O contamination. Under carbonate-free conditions, the BaO-Nd 2 O 3 -CuO x phase diagrams at pO 2 =100 Pa and at pO 2 =21 kPa are similar to one another except for differences in the extent of the solid solutions. Apart from the limiting binary phases, the ternary system consists of three solid solutions and one stoichiometric ternary compound. The first solid solution is the high T c series, Ba 2-x Nd 1+x Cu 3 O 6+z (0.3≥x≥0 at pO 2 =100 Pa; 0.95≥x≥ 0 at pO 2 =21 kPa). At pO 2 =21 kPa, a compositionally dependent phase change was detected, from tetragonal (0.7>x≥0) to orthorhombic (0.95≥x≥0.7). The second solid solution series, the 'brown-phase' Ba 1+x Nd 2-x CuO z , has a narrow homogeneity region (0.10>x≥0 at pO 2 =100 Pa; 0.15>x≥0 at pO 2 =21 kPa). In the high BaO part of the phase diagram, a third solid solution (Ba 2-x Nd x )CuO 3+z (x=0 to ∼ 0.3 at pO 2 =100 Pa; x=0-0.45 at pO 2 =21 kPa) was confirmed, as well as a nominally stoichiometric phase, Ba 4 Nd 2 Cu 2 O z . The latter phase is an insulator, with a structure comprised of unusual CuO 5 linear chains. A significant difference in tie line distribution involving the Ba 2-x Nd 1+x Cu 3 O 6+z superconductor was found under carbonate-free conditions relative to literature studies completed in air. Instead of the BaCuO 2+x -Ba 2+x Nd 4-x Cu 2 O z tie line normally encountered in air, a Ba 2-x Nd 1+x Cu 3 O 6+z -(Ba,Nd) 2 CuO 3+x tie line was established. This tie line substantially expands the field of stability of the Ba 2-x Nd 1+x Cu 3 O 6+z superconductor phase into the BaO-rich region of the phase diagram. Implications for the processing of materials based on the Ba 2-x Nd 1+x Cu 3 O 6+z

Are the phosphorus-rich Na2O–CaO–B2O3–SiO2–P2O5 glasses bioactive and what is an influence of doping with manganese oxide?

Directory of Open Access Journals (Sweden)

Bragiel P.

2018-03-01

Full Text Available A series of glasses of the composition 20Na2-O-15CaO-5B2O3-5SiO2-(55 - x P2O5:xMnO2, was prepared and characterized by XRD, DSC, SEM, and Raman techniques. The samples were later immersed in simulated body fluid (SBF for checking the potential growth of hydroxyapatite layer (HA. Experiments confirmed that addition of manganese oxide leads to structural changes of the glasses. With increasing content of MnO2, the surface of the samples became more congenial for improving the growth of HA. The formation of HA layer on the surface of the samples was confirmed just after seven days of immersion. The growth rate of HA has gradually increased with the increase of MnO2 content.

Synthesis, cytotoxicity, and hydroxyapatite formation in 27-Tris-SBF for sol-gel based CaO-P2O5-SiO2-B2O3-ZnO bioactive glasses.

Science.gov (United States)

Kaur, Gurbinder; Pickrell, G; Kimsawatde, G; Homa, D; Allbee, H A; Sriranganathan, N

2014-03-18

CaO-P2O5-SiO2-B2O3-ZnO bioactive glasses were prepared via an optimized sol-gel method. The current investigation was focused on producing novel zinc based calcium phosphoborosilicate glasses and to evaluate their mechanical, rheological, and biocompatible properties. The morphology and composition of these glasses were studied using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The particle size, mechanical and flexural strength was also determined. Furthermore, the zeta potential of all the glasses were determined to estimate their flocculation tendency. The thermal analysis and weight loss measurements were carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) respectively. For assessing the in-vitro bioactive character of synthesized glasses, the ability for apatite formation on their surface upon their immersion in simulated body fluid (SBF) was checked using SEM and pH measurements. MTS assay cytotoxicity assay and live-dead cell viability test were conducted on J774A.1 cells murine macrophage cells for different glass concentrations.

Microestructura de Al2O3/TZP codopado con Fe2O3 y TiO2 fabricado por reacción (RBAO

Directory of Open Access Journals (Sweden)

Jiménez, M.

2003-02-01

Full Text Available Reaction-bonded 80 vol% Al2O3/TZP (2 mol% Y2O3-stabilized tetragonal zirconia polycrystals composites co-doped with 1 vol% Fe2O3 and 1 vol% TiO2 have been produced, and then presureless sintered (1450 ºC, 60 min or sinter-forged (20 MPa, 1200 ºC, 60 min. The resulting microstructures have been characterized using scanning electron microscopy. Both types of materials are dense, with a fine and homogeneous dual microstructure consisting of Al2O3 and TZP grains without intermediate grain boundary phases. Sinter-forged composites exhibit a very narrow pore size distribution, essentially smaller than the grain size of the alumina and zirconia phases. Co-doping promotes the sintering of alumina at lower temperatures, while still retains a fine grain size due to the presence of the dispersed zirconia phase. First results on presureless sintered RBAO materials show a fracture strength higher than in conventionally sintered and sinter-forged composites.Se han fabricado compuestos de 80% vol. Al2O3/TZP (ZrO2 estabilizada con 2% mol Y2O3 codopados con 1% vol. Fe2O3 y 1% vol. TiO2 mediante la tecnología RBAO (“Reaction Bonding of Aluminum Oxide”, que se han sinterizado libremente (1450 ºC, 60 min y bajo carga uniaxial (20 MPa, 1200 ºC, 60 min. Se ha caracterizado la microestructura mediante microscopía electrónica de barrido. Ambos materiales son densos con una microestructura homogénea formada por granos de alúmina y de circona, sin fases en juntas de grano. En el caso de la sinterización bajo carga, la distribución del tamaño de los poros es muy estrecha, y esencialmente menor que las correspondientes a los granos de Al2O3 y TZP. El codopado promueve la sinterización de la alúmina, mientras que los granos dispersos de circona inhiben su crecimiento de grano. Los ensayos preliminares de flexión en cuatro puntos realizados sobre los materiales sinterizados sin carga indican una resistencia a la fractura superior a la que presentan los

Zero photoelastic and water durable ZnO–SnO–P2O5–B2O3 glasses

Directory of Open Access Journals (Sweden)

Akira Saitoh

2015-04-01

Full Text Available We report properties of zero birefringent xZnO–(67–xSnO–(33–yP2O5–y B2O3 glasses, within 18.5 ≤ x ≤ 22 and y = 0, 3, and 10 mol. %. These compositions of boro-phosphate glasses provide both zero photoelastic constant (PEC and improved water durability. x = 19 and y = 3 compositions show minimum PEC of −0.002 × 10−12 Pa−1, which can contribute to candidate material for fiber current sensor devise without lead. The structures of zero photoelastic glasses were investigated by Raman scattering and nuclear magnetic resonance spectroscopies. Compositions of zero PEC glasses are explained by the empirical model proposed by Zwanziger et al. [Chem. Mater. 19, 286-290 (2007].

Structural change of NaO1/2-WO3-NbO5/2-LaO3/2-PO5/2 glass induced by electrochemical substitution of sodium ions with protons.

Science.gov (United States)

Ishiyama, Tomohiro; Yamaguchi, Takuya; Nishii, Junji; Yamashita, Toshiharu; Kawazoe, Hiroshi; Kuwata, Naoaki; Kawamura, Junichi; Omata, Takahisa

2015-05-28

Structural changes of 35NaO1/2-1WO3-8NbO5/2-5LaO3/2-51PO5/2 glass (1W-glass) before and after the electrochemical substitution of sodium ions with protons by alkali-proton substitution (APS) are studied by Raman and (31)P magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopies. The glass before APS consists of (PO3(-))8.6(P2O7(4-)) chains on average and the terminal Q(1) units (-O-PO3(3-)) are bound to MO6 octahedra (M denotes niobium or tungsten) through P-O-M bonds. Some non-bridging oxygens (NBOs) in the MO6 octahedra are present in addition to the bridging oxygens (BOs) in P-O-M bonds. APS induces fragmentation of the phosphate chains because the average chain length decreases to (PO3(-))3.7(P2O7(4-)) after APS, despite the total number of modifier cations of sodium and lanthanum ions and protons being unaffected by APS. This fragmentation is induced by some of the NBOs in the MO6 octahedra before APS, changing to BOs of the newly formed M-O-P bonds after APS, because of the preferential formation of P-OH bonds over M-OH ones in the present glass. We show that APS under the conditions used here is not a simple substitution of sodium ions with protons, but it is accompanied by the structural relaxation of the glass to stabilize the injected protons.

Structural and magnetic properties of SiO2–CaO–Na2O–P2O5 containing BaO–Fe2O3 glass–ceramics

International Nuclear Information System (INIS)

Leenakul, W.; Kantha, P.; Pisitpipathsin, N.; Rujijanagul, G.; Eitssayeam, S.; Pengpat, K.

2013-01-01

The incorporation method was employed to produce bioactive glass–ceramics from the BaFe 12 O 19 –SiO 2 –CaO–Na 2 O–P 2 O 5 glass system. The ferrimagnetic BaFe 12 O 19 was first prepared using a simple mixed oxide method, where the oxide precursors of 45S5 bioglass were initially mixed and then melted to form glass. The devitrification of Na 3 Ca 6 (PO 4 ) 5 and Fe 3 O 4 was observed in all of the quenched glass samples. The glass samples were then subjected to a heat treatment schedule for further crystallization. It was found that the small traces of BaFe 12 O 19 phases started to crystallize in high BF content samples of 20 and 40 wt%. These samples also exhibited good magnetic properties comparable to that of other magnetic glass–ceramics. The bioactivity of the BF glass–ceramics improved with increasing BF content as was evident by the formation of bone-like apatite layers on the surface of all of the glass–ceramics after soaking in SBF for 14 days. The results support the use of these bioactive glass–ceramics for hyperthermia treatment within the human body. - Highlights: ►BF addition improves the magnetic property and bioactivity of 45S5 bioglasses.►Bioglass-ceramics exhibited soft magnetic properties with Mr=14.850 emu/g.►Magnetic property can be enhanced by crystallization of BF in 45S5 bioglasses.

Utilización de mantenedores de espacio en pacientes con pérdidas prematuras de dientes primarios

Directory of Open Access Journals (Sweden)

Natsibet Rivero García

2012-02-01

Full Text Available La pérdida prematura de dientes primarios ocurre cuando estos exfolian o son extraídos antes del momento fisiológico de recambio. Objetivo: determinar la asociación entre el uso de mantenedores de espacio y las pérdidas prematuras de dientes primarios. Materiales y métodos: se realizó el estudio descriptivo, retrospectivo, longitudinal y correlacional, de 109 registros diagnósticos de pacientes entre 3-9 años, atendidos en el Postgrado de Odontología Infantil de la UCV, excluyendo aquellos con síndromes o alteraciones sistémicas. Fue evaluado el estrato socioeconómico, dientes perdidos y el uso del mantenedor de espacio Se aplicaron pruebas estadísticas descriptivas, X2 de Pearson, y T de Student (p=0,05. Resultados: la edad de la muestra fue 4,93 ± 1,5 años. La prevalencia de pérdidas prematuras fue 70,90%, la media de dientes extraídos fue 3,75 ± 2,56. La causa más frecuente fue la caries 76,5% y el diente más afectado el 64 con 11,11%. El 72,12% de los pacientes utilizó mantenedor de espacio, siendo el más usado el fijo en 52,27% No hubo asociación estadísticamente significativa entre el estrato socioeconómico con el número de dientes afectados ni con el uso o no de mantenedor de espacio. Conclusión: la prevalencia de pérdidas prematuras para este estudio fue elevada debido a las características inherentes al tipo de servicio especializado en el que se brinda atención a pacientes con requerimientos de tratamiento complejo. En la mayoría de los casos se cumplió satisfactoriamente con el uso de mantenedores de espacio como elemento de prevención de maloclusiones.

Gamma ray shielding and structural properties of PbO-P2O5-Na2WO4 glass system

Science.gov (United States)

Dogra, Mridula; Singh, K. J.; Kaur, Kulwinder; Anand, Vikas; Kaur, Parminder

2017-05-01

The present work has been undertaken to study the gamma ray shielding properties of PbO-P2O5-Na2WO4 glass system. The values of mass attenuation coefficient and half value layer parameter at photon energies 511, 662 and 1173 KeV have been determined using XCOM computer software developed by National Institute of Standards and Technology. The density, molar volume, XRD, UV-VIS and Raman studies have been performed to study the structural properties of the prepared glass system to check the possibility of the use of prepared samples as an alternate to conventional concrete for gamma ray shielding applications.

The 5s25p2 - (5s25p5d + 5s5p3 + 5s25p6s + 5s25p7s) transitions in Sb II and 5s25p - (5s5p2 + 5s2nl) transitions in Sb III

International Nuclear Information System (INIS)

Arcimowicz, B.; Joshi, Y.N.; Kaufman, V.

1989-01-01

The spectrum of antimony was photographed in the 575-2300 A region (1A 10 -10 m) using a hollow cathode and a triggered spark source. The analysis of the 5s 2 5p 2 - (5s 2 5p5d + 5s5p 3 + 5s 2 5p6s + 5s 2 5p7s) transitions in Sb II spectrum was revised and interpreted on the basis of multiconfiguration interaction calculations. Accurate wavelength measurements of Sb III lines lead to a revised ground-state 5s 2 5p 2 P interval value of 6574.5 cm -1 . (author). 15 refs., 9 tabs., 1 fig

Synthesis, characterization and in vitro bioactivity of sol-gel-derived SiO2-CaO-P2O5-MgO bioglass

International Nuclear Information System (INIS)

Saboori, A.; Rabiee, M.; Moztarzadeh, F.; Sheikhi, M.; Tahriri, M.; Karimi, M.

2009-01-01

In this study, the synthesis of SiO 2 -CaO-P 2 O 5 -MgO bioactive glass was performed by the sol-gel method. Sol-gel-derived bioglass material was produced both in powder and in discs form by uniaxial pressing, followed by sintering at 700 deg. C. The obtained material was evaluated by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analyses. The biocompatibility evaluation of the formed glass was assessed through in vitro cell culture [alkaline phosphatase (AP) activity of osteoblasts] experiments and immersion studies in simulated body fluid (SBF) for different time intervals while monitoring the pH changes and the concentration of calcium, phosphorus and magnesium in the SBF medium. The SEM, XRD and FTIR studies were conducted before and after soaking of the material in SBF. At first, an amorphous calcium phosphate was formed; after 7 days this surface consisted of deposited crystalline apatite. The present investigation also revealed that the sol-gel derived quaternary bioglass system has the ability to support the growth of human fetal osteoblastic cells (hFOB 1.19). Finally, this material proved to be non-toxic and compatible for the proposed work in segmental defects in the goat model in vivo

Influence of P{sub 2}O{sub 5} and Al{sub 2}O{sub 3} content on the structure of erbium-doped borosilicate glasses and on their physical, thermal, optical and luminescence properties

Energy Technology Data Exchange (ETDEWEB)

Bourhis, Kevin, E-mail: k.bourhis@argolight.com [Politecnico di Torino, DISAT, Istituto di Ingegneria e Fisica dei Materiali, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy); Massera, Jonathan [Process Chemistry Centre, Åbo Akademi University, Biskopsgatan 8, FI-20500 Turku (Finland); Petit, Laeticia; Ihalainen, Heikki [nLIGHT Corporation, Sorronrinne 9, FI-08500 Lohja (Finland); Fargues, Alexandre; Cardinal, Thierry [CNRS, Université de Bordeaux, ISM, 351Cours de la Libération, F-33405 Talence (France); Hupa, Leena; Hupa, Mikko [Process Chemistry Centre, Åbo Akademi University, Biskopsgatan 8, FI-20500 Turku (Finland); Dussauze, Marc; Rodriguez, Vincent [CNRS, Université de Bordeaux, ICMCB, 87 Avenue du Dr Schweitzer, F-33608 Pessac (France); Boussard-Plédel, Catherine; Bureau, Bruno; Roiland, Claire [Equipe Verres et Céramiques, UMR-CNRS 6226, Inst. des Sciences chimiques de Rennes, Université de Rennes 1, 35042 Rennes CEDEX (France); Ferraris, Monica [Politecnico di Torino, DISAT, Istituto di Ingegneria e Fisica dei Materiali, Corso Duca degli Abruzzi 24, I-10129 Torino (Italy)

2015-03-15

Highlights: • Reorganization of the glass structure induced by the addition of P{sub 2}O{sub 5} or Al{sub 2}O{sub 3}. • Emission properties related to the presence of P or Al in the Er{sup 3+} coordination shell. • Declustering observed upon addition of P{sub 2}O{sub 5}. • No declustering upon addition of Al{sub 2}O{sub 3}. - Abstract: The effect of P{sub 2}O{sub 5} and/or Al{sub 2}O{sub 3} addition in Er-doped borosilicate glasses on the physical, thermal, optical, and luminescence properties is investigated. The changes in these glass properties are related to the glass structure modifications induced by the addition of P{sub 2}O{sub 5} and/or Al{sub 2}O{sub 3}, which were probed by FTIR, {sup 11}B MAS NMR and X-ray photoelectron spectroscopies. Variations of the polymerization degree of the silicate tetrahedra and modifications in the {sup [3]}B/{sup [4]}B ratio are explained by a charge compensation mechanism due to the formation of AlO{sub 4}, PO{sub 4} groups and the formation of Al-O-P linkages in the glass network. From the absorption and luminescence properties of the Er{sup 3+} ions at 980 nm and 1530 nm, declustering is suspected for the highest P{sub 2}O{sub 5} concentrations while for the highest Al{sub 2}O{sub 3} concentrations no declustering is observed.

Stabilization/Solidification of radioactive molten salt waste by using xSiO2-yAl2O3-zP2O5 material

International Nuclear Information System (INIS)

Hwan-Seo Park; In-Tae Kim; Yong-Zun Cho; Seong-Won Park; Eung-Ho Kim

2008-01-01

Molten salt waste generated from the electro metallurgical process to recover uranium and transuranic elements is considered as one of problematic wastes to be difficult to immobilize into a durable for final disposal. As an alternative, this study suggested a new method performed at molten state, where dechlorination was achieved with a new inorganic material containing SiO 2 , Al 2 O 3 and P 2 O 5 (SAP). The SAP as a reactive material to molten salt was prepared by a conventional sol-gel process. The prepared SAPs were reacted with each metal chloride, LiCl, CsCl, SrCl 2 and CeCl 3 at 650 deg. C for 6 hours and also were reacted with simulated salt waste consisting of 90 wt% LiCl, 6.8 wt% CsCl and 3.2 wt% SrCl 2 at different waste loading. All the reactions were carried out in oxidative atmosphere and metal chlorides were effectively converted into stable products under a reasonable reaction ratio

Bioactivity analysis of the Ta (V doped SiO2–CaO–Na2O–P2O5 ceramics prepared by solid state sintering method

Directory of Open Access Journals (Sweden)

Rehana Zia

2016-02-01

Full Text Available The main objective of the study was to control the degradation rate of material at a higher degradation rate improving the chemical stability of the material. Ta is known to have good chemical resistance, biocompatibility and show no adverse biological response. In the present study, SiO2–Na2O–CaO–P2O5 bioceramics with different Ta2O5 contents was prepared by solid state sintering method at 1000 °C. The as-sintered ceramics were subjected to immersion studies in stimulated body fluid (SBF for 21 days under static condition and characterized by XRD, FTIR, SEM, and AAS. The findings of the research indicate that the addition of Ta2O5 controlled degradability, and all samples showed sufficient bioactivity.

SiO2-TiO2-P2O5 meso porous coatings for proton exchange membranes fuel cells

International Nuclear Information System (INIS)

Castro, Y.; Mosa, J.; Duran, A.

2014-01-01

The article describes the preparation of meso porous SiO 2 -TiO 2 -P 2 O 5 coatings by Sol-Gel process combined to EISA method for using as proton exchange membranes fuel cells. Tetraethyl orthosilicate (TEOS), methyl triethoxysilane (MTES), titanium tetrachloride (TiCl 4 ) and phosphorus trichloride (PCl 3 ) have used as precursors and cetyl trimethylammonium bromide (CTAB) as porous generator agent. Films were deposited by immersion technique controlling the relative humidity at 40 and 20-70% and treated at 400 to 500 degree centigrade for 15, 30, 45 and 60 min. The variation of the refractive index and thickness have studied as a function of temperature and sintering time as well as the pore volume and density of the coatings by spectroscopic ellipsometry. Moreover, the hydrophobic/hydrophilic character of the coatings has been studied by Transform Infrared Spectroscopy (FTIR) and by contact angle measurements, following the loss of methyl groups with the temperature and sintering time. The results show that these parameters are crucial to obtain coatings with high porosity and low contact angle, important to obtain high proton conductivity conditions. The sintering conditions were fixed to 400 degree centigrade/60 min. Conductivity measurements at four points show high proton conductivity, 0,16 and 0,85 S/cm, up and down ramp, respectively, at 80 degree centigrade and 80 % of humidity. These coatings are good candidates for PEMFC membranes, if they are deposited onto electrodes. (Author)

Remoção de nitrato da água utilizando bagaço de caju quimicamente modificado

Directory of Open Access Journals (Sweden)

Raimundo Renato Melo Neto

2013-09-01

Full Text Available O ânion nitrato (NO-3, devido sua alta solubilidade em água, é um contaminante de difícil remoção. Os métodos atualmente empregados para tratamento de água contaminada por nitrato possuem um elevado custo e não são muito eficientes, já que em alguns casos são gerados resíduos mais tóxicos que o próprio nitrato. Tecnologias contemporâneas empregadas para tratamento de efluentes aquosos têm seus mecanismos baseados no fenômeno de adsorção, em que um sólido poroso é capaz de adsorver determinadas substâncias, quando estas estão em contato. Estas tecnologias são economicamente rentáveis quando são empregados rejeitos agrícolas como adsorventes. Baseado no exposto este trabalho tem como objetivo avaliar a eficiência de remoção de nitrato de água, utilizando bagaço de caju quimicamente modificado. Os estudos foram realizados em batelada. Os ensaios de adsorção evidenciaram que o tratamento do bagaço de caju com NaOH 0,1 mol.L-1  alcançou uma eficiência de remoção de 96%, enquanto que o bagaço sem tratamento obteve remoção de 22%. O mecanismo de adsorção modelou-se a uma cinética de pseudo-segunda ordem e foi mais bem correlacionado com a isoterma de Freundlich.  

Predictor de Smith modificado mediante un modelo interno, robusto a perturbaciones externas no medibles.

Directory of Open Access Journals (Sweden)

Fernando Castillo García

2010-11-01

Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 Se propone una modificación de la estructura del predictor de Smith mediante un modelo interno que posibilita aumentar su rechazo al efecto de las per-turbaciones externas no medibles en comparación con la estructura clásica del predictor de Smith. Los resultados obtenidos se aplican en el diseño de un sistema de control del proceso de variación de la temperatura del jugo en los calentadores de una fábrica de azúcar. Los resultados de la simulación del sistema diseñado mostraron su efectividad y robustez en cuanto al rechazo de perturbaciones externas no medibles. Palabras claves: Predictor de Smith, predictor de Smith modificado, rechazo a perturbaciones externas no medibles, robustez de los sistemas de control.

The influence of phosphorus precursors on the synthesis and bioactivity of SiO2-CaO-P 2O 5 sol-gel glasses and glass-ceramics.

Science.gov (United States)

Siqueira, Renato Luiz; Zanotto, Edgar Dutra

2013-02-01

Bioactive glasses and glass-ceramics of the SiO(2)-CaO-P(2)O(5) system were synthesised by means of a sol-gel method using different phosphorus precursors according to their respective rates of hydrolysis-triethylphosphate (OP(OC(2)H(5))(3)), phosphoric acid (H(3)PO(4)) and a solution prepared by dissolving phosphorus oxide (P(2)O(5)) in ethanol. The resulting materials were characterised by differential scanning calorimetry and thermogravimetry, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy and by in vitro bioactivity tests in acellular simulated body fluid. The different precursors significantly affected the main steps of the synthesis, beginning with the time required for gel formation. The most striking influence of these precursors was observed during the thermal treatments at 700-1,200 °C that were used to convert the gels into glasses and glass-ceramics. The samples exhibited very different mineralisation behaviours; especially those prepared using the phosphoric acid, which had a reduced onset temperature of crystallisation and an increased resistance to devitrification. However, all resulting materials were bioactive. The in vitro bioactivity of these materials was strongly affected by the heat treatment temperature. In general, their bioactivity decreased with increasing treatment temperature. For crystallised samples obtained above 900 °C, the bioactivity was favoured by the presence of two crystalline phases: wollastonite (CaSiO(3)) and tricalcium phosphate (α-Ca(3)(PO(4))(2)).

Crystallization and magnetic properties of a 10Li{sub 2}O–9MnO{sub 2}–16Fe{sub 2}O{sub 3}–25CaO–5P{sub 2}O{sub 5}–35SiO{sub 2} glass

Energy Technology Data Exchange (ETDEWEB)

Wang, Moo-Chin, E-mail: mcwang@kmu.edu.tw [Department of Fragrance and Cosmetic Science, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 80708, Taiwan (China); Cheng, Huy-Zu [Department of Materials Science and Engineering, I-Shou University, 1 123456789Hsueh-Cheng Road, Section 1, Ta-Hsu, Kaohsiung 84001, Taiwan (China); Lin, Huey-Jiuan [Department of Materials Science and Engineering, National United University, 1 Lien-Da Road, Kung-Ching Li, Miao-Li 36003, Taiwan (China); Wang, Chien-Fu [Department of Materials Science and Engineering, I-Shou University, 1 123456789Hsueh-Cheng Road, Section 1, Ta-Hsu, Kaohsiung 84001, Taiwan (China); Hsi, Chi-Shiung, E-mail: chsi@nuu.edu.tw [Department of Materials Science and Engineering, National United University, 1 Lien-Da Road, Kung-Ching Li, Miao-Li 36003, Taiwan (China)

2013-06-15

The crystallization behavior and magnetic properties of 10Li{sub 2}O–9MnO{sub 2}–16Fe{sub 2}O{sub 3}–25CaO–5P{sub 2}O{sub 5}–35SiO{sub 2} (10LFS) glass have been studied using differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM) and selected area electron diffraction (SAED) to observe the crystallization behavior and a superconducting quantum interference device (SQUID) for measurements of the magnetic properties. The DTA shows that the 10LFS glass has one broad exothermic peak at approximately 674 °C and one sharp (the highest) exothermic peak at 764 °C. When the 10LFS glass crystallized at 850 °C for 4 h, the crystalline phases identified by XRD were lithium silicate (Li{sub 2}SiO{sub 3}), β-wollastonite (β-CaSiO{sub 3}), lithium orthophosphate (Li{sub 3}PO{sub 4}), magnetite (FeFe{sub 2}O{sub 4}) and triphylite (Li(Mn{sub 0.5}Fe{sub 0.5})PO{sub 4}). The SEM surface analysis revealed that the β-wollastonite and lithium silicate have a lath morphology. The TEM microstructure examination showed that the largest FeFe{sub 2}O{sub 3} particles have a size of approximately 0.3 μm. When the 10LFS glass was heat treated at 850 °C for 16 h and a magnetic field of 1000 Oe was applied, a very small remnant magnetic induction of 0.01 emu g{sup −1} and a coercive force of 50 Oe were obtained, which revealed an inverse spinel structure. - Highlights: ► The phases formed at 850 °C in the 10LFS glass-ceramics are LiSiO{sub 3}, β-CaSiO{sub 3}, Li{sub 3}PO{sub 4}, FeFe{sub 2}O{sub 4} and Li(Mn{sub 0.5}Fe{sub 0.5})PO{sub 4}. ► The β-wollastonite and lithium silicate have a lath morphology. ► When 10LFS glass-ceramics applied magnetic field showing the ferromagnetic behavior of an inverse spinel structure.

Crystal structure of RbCe(SeO4)2 · 5H2O

International Nuclear Information System (INIS)

Ovanesyan, S.M.; Iskhakova, L.D.; Trunov, V.K.

1987-01-01

RbTR(SeO 4 ) 2 x5H 2 O TR=La-Pr are synthesized. Crystal structure of RbCe(SeO 4 ) 2 x5H 2 O is studied. Monoclinic unit parameters are: a=7,200(2), b=8,723(1), c=19,258(6) A, Β=90,88(2), ρ (calc) =3,304 sp.gr. P2 1 /c. Within the structure the Ce nine vertex cages are united by Se(1)- and Se(2)-tetrahedrons in (Ce(SeO 4 ) 2 (H 2 O) 5 ) 2 ∞ n- layers. Some crystal structure regularities of the laminated MTR(EO 4 ) 2 xnH 2 O (M=NH 4 ,K,Rb,Cs; TR=La-Ln, E=S,Se) are considered

IR spectra and structure of glasses in the BaO-WO3-P2O5 system

International Nuclear Information System (INIS)

Miroshnichenko, O.Ya.; Mombelli, V.V.

1979-01-01

Studied are IR absorption spectra and determined are the main structural characteristics of tungstophosphate glasses of the BaO-WO 3 -P 2 O 5 system in all the area of glass formation. It is shown that the main structural components of their anion network are phosphate chains consisting of PO 4 tetrahedrons and tungstate chains consisting of WO 4 tetrahedrons and of WO 6 octahedrons. These chains are connected by P-O-W bridges into three-dimentional tungstophosphate network, where the ratio of phosphate and tungstate structural units and their polymerization degree change without limits depending on the glass composition. Analysis of concentration frequency dependence and spectral band intensity permit to clarify the effect of each component on the glass structure in all the area of glass formation of the triple system

Electrodo biológico con la enzima hidrogenasa, procedimiento de obtención y sus aplicaciones

OpenAIRE

Fernández López, Víctor Manuel; López de Lacey, Antonio; Rüdiger Ortiz, Olaf

2005-01-01

Electrodo biológico con la enzima hidrogenasa, procedimiento de obtención y sus aplicaciones. En la presente invención se protegen electrodos biológicos modificados con enzimas hidrogenasas (ánodos) mediante los cuales es posible obtener energía eléctrica del hidrógeno en una configuración típica de pilas de combustible; asimismo, con estos electrodos modificados con hidrogenasa (cátodos) es posible producir hidrógeno a partir de agua en una configuración típica de cél...

Characterization of ZrP{sub 2}O{sub 7} modified with oxalic acid and thermodynamic analysis associated to the uranyl (Vi) sorption; Caracterizacion de ZrP{sub 2}O{sub 7} modificado con acido oxalico y analisis termodinamico asociado a la sorcion de uranilo (VI)

Energy Technology Data Exchange (ETDEWEB)

Garcia G, N.; Ordonez R, E. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Solis C, D. A. [Universidad Autonoma del Estado de Mexico, Facultad de Quimica, Paseo Colon y Paseo Tollocan, 50120 Toluca, Estado de Mexico (Mexico); Simoni, E.; Drot, R.; Jeanson, A., E-mail: eduardo.ordonez@inin.gob.mx [Universite Paris-Sud, Institut de Physique Nucleaire, Georges Clemenceau No. 15, Orsay (France)

2013-10-15

Several physical and chemical tests were carried out to evaluate the influence of the oxalic acid in the uranium (Vi) sorption on the surface of the zirconium diphosphate. The physical analyses consist of atomic force microscopy (AFM) and total organic coal, and the chemists are the calculation of the reaction heat for the hydrate and sorption processes, the reaction speed constant and the sorption yield in the sodium perchlorate systems and of oxalic acid; these tests allow to corroborate that the oxalic acid influences positively in the uranium (Vi) sorption forming a ternary system of ZrP{sub 2}O{sub 7}/(C{sub 2}O{sub 4})/U(Vi), with a single configuration along the ph interval studied. (Author)

Desarrollo y caracterización de caolines modificados para aplicaciones industriales

OpenAIRE

De la Torre, Ernesto; Cando, María; Guevara, Alicia

2010-01-01

En este trabajo se buscó modificar térmicamente arcillas tipo caolines para mejorar sus propiedades mecánicas naturales y obtener materiales con posibilidades de uso industrial. Para ello se caracterizaron física-química y mineralógicamente caolines naturales y modificados, se estandarizaron métodos de análisis cualitativo de arcillas mediante difracción de rayos X (DRX), empleando técnicas como la dispersión centrifugación y el ultrasonido, para la elaboración de placas de agregados orientad...

Influence of heat treatments upon the mechanical properties and in vitro bioactivity of ZrO2-toughened MgO-CaO-SiO2-P2O5-CaF2 glass-ceramics.

Science.gov (United States)

Li, Huan-Cai; Wang, Dian-Gang; Meng, Xiang-Guo; Chen, Chuan-Zhong

2014-09-01

Zirconia-toughened MgO-CaO-SiO2-P2O5-CaF2 glass-ceramics are prepared using sintering techniques, and a series of heat treatment procedures are designed to obtain a glass-ceramic with improved properties. The crystallization behavior, phase composition, and morphology of the glass-ceramics are characterized. The bending strength, elastic modulus, fracture toughness, and microhardness of the glass-ceramics are investigated, and the effect mechanism of heat treatments upon the mechanical properties is discussed. The bioactivity of glass-ceramics is then evaluated using the in vitro simulated body fluid (SBF) soaking test, and the mechanism whereby apatite forms on the glass-ceramic surfaces in the SBF solution is discussed. The results indicate that the main crystal phase of the G-24 sample undergoing two heat treatment procedures is Ca5(PO4)3F (fluorapatite), and those of the G-2444 sample undergoing four heat treatment procedures are Ca5(PO4)3F and β-CaSiO3 (β-wollastonite). The heat treatment procedures are found to greatly influence the mechanical properties of the glass-ceramic, and an apatite layer is induced on the glass-ceramic surface after soaking in the SBF solution.

CARACTERIZACIÓN DE ALMIDONES DE YUCA NATIVOS Y MODIFICADOS PARA LA ELABORACIÓN DE EMPAQUES BIODEGRADABLES

Directory of Open Access Journals (Sweden)

MARIO ENRÍQUEZ C.

Full Text Available Se estudiaron las propiedades fisicoquímicas de tres variedades de almidón de yuca (Manihot sculenta Crantz nativas y modificadas por hidroxipropilación.Las variedades estudiadas estaban nombradas con los códigos CM 7138-7, CUMBRE 3 y SM 707-17.Se determinó el grado de modificación de los almidones, se desarrollaron curvas de empastamiento de almidones, se obtuvieron propiedades térmicas mediante calorimetría de barrido diferencial (DSC y termogravimetría (TGA y se generaron espectros de absorción de los almidones por espectroscopía infrarroja con transformada de Fourier (FT-IR. Respecto a los almidones nativos, se identificaron diferencias entre éstos en las curvas de empastamiento, en la temperatura de transición vítrea (Tg y en la temperatura de fusión (Tm;en cuanto a los almidones modificados, se identificaron diferencias entre éstos en el grado de sustitución molar, en las curvas de empastamiento, en la Tg, la Tm y en los espectros obtenidos mediante FT-IR; en ambos casos estas diferencias fueron atribuidas al contenido de amilosa y amilopectina de los almidones. Respecto a las diferencias entre almidones nativos y modificados, el proceso de hidroxipropilación generó cambios en las propiedades estudiadas. Debido a su contenido de amilosa, menor viscosidad y Tg de su almidón modificado, la variedad CM 7138-7fue aquella que posiblemente presentó mejor potencial para ser empleada en la elaboración de empaques biodegradables.

Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

International Nuclear Information System (INIS)

Bourhis, Kevin; Massera, Jonathan; Petit, Laeticia; Koponen, Joona; Fargues, Alexandre; Cardinal, Thierry; Hupa, Leena; Hupa, Mikko; Dussauze, Marc; Rodriguez, Vincent; Ferraris, Monica

2015-01-01

Highlights: • Er 3+ doped borosilicate glasses were processed with different compositions and characterizations. • An increase in the SiO 2 content leads to a silicate-rich environment around the Er 3+ site. • An increase in the SiO 2 content decreases the Er 3+ absorption cross-section at 980 nm. • Glasses with 60 mol% of SiO 2 exhibit a stronger emission intensity at 1530 nm than glasses with x = 50. • Highest 1.5 μm emission intensity was achieved for the Al and P containing glass with 60 mol% of SiO 2 . - Abstract: The influence of the silica content on several properties of Er-doped borosilicate glasses in the presence of various amounts of P 2 O 5 and Al 2 O 3 has been investigated. The introduction of P 2 O 5 and/or Al 2 O 3 are responsible for structural modifications in the glass network through a charge-compensation mechanism related to the formation of negatively-charged PO 4 and AlO 4 groups or through the formation of AlPO 4 -like structural units. In this paper, we show that an increase in the SiO 2 content leads to a silicate-rich environment around the Er 3+ site, resulting in an increased dependence of the Er 3+ ions optical and luminescence properties on the P 2 O 5 and/or Al 2 O 3 concentration. The highest emission intensity at 1.5 μm was achieved for the glass with an equal proportion of P and Al in the glass system with 60 mol% of SiO 2

Understanding the magnetic behavior of heat treated CaO-P2O5-Na2O-Fe2O3-SiO2 bioactive glass using electron paramagnetic resonance studies

Science.gov (United States)

Shankhwar, Nisha; Kothiyal, G. P.; Srinivasan, A.

2014-09-01

Bioactive glass of composition 41CaO-44SiO2-4P2O5-8Fe2O3-3Na2O has been heat treated in the temperature (TA) range of 750-1150 °C for time periods (tA) ranging from 1 h to 3 h to yield magnetic bioactive glass ceramics (MBCs). X-ray diffraction studies indicate the presence of bone mineral (hydroxyapatite and wollastonite) and magnetic (magnetite and α-hematite) phases in nanocrystalline form in the MBCs. Electron paramagnetic resonance (EPR) study was carried out to understand the variation in saturation magnetization and coercivity of the MBCs with TA and tA. These studies reveal the nature and amount of iron ions present in the MBCs and their interaction in the glassy oxide matrix as a function of annealing parameters. The deterioration in the magnetic properties of the glass heat treated above 1050 °C is attributed to the crystallization of the non-magnetic α-hematite phase. These results are expected to be useful in the application of these MBCs as thermoseeds in hyperthermia treatment of cancer.

Improving low-temperature performance of spinel LiNi0.5Mn1.5O4 electrode and LiNi0.5Mn1.5O4/Li4Ti5O12 full-cell by coating solid-state electrolyte Li-Al-Ti-P-O

Science.gov (United States)

Bi, Kun; Zhao, Shi-Xi; Huang, Chao; Nan, Ce-Wen

2018-06-01

Octahedral cathode materials LiNi0.5Mn1.5O4 (LNMO), with primary particles size of 300-600 nm are prepared through one-step co-precipitation. Then solid-state electrolyte Li2O-Al2O3-TiO2-P2O5 (LATP) was coated on LNMO to form continuous surface-modification layer. There is no obviously difference of structure, morphology between coated LATP LiNi0.5Mn1.5O4 (LATP-LNMO) and pristine LiNi0.5Mn1.5O4 (P-LNMO). Low-temperature electrochemical performance of P-LNMO and LATP-LNMO electrodes, including charge-discharge capacity, cycle performance, middle discharge voltage and electrochemical impedance spectra (EIS), were measured systematically with three electrode. The results reveal that LATP-LNMO electrode presents superior electrochemical performance at low temperature, compared to P-LNMO electrode. At -20 °C, the capacity retention of LATP-LNMO (61%) is much higher than that of P-LNMO (39%). According to EIS, the enhancement of performance of LATP-LNMO cathode at low temperature can be attribute to LATP coating, which not only promotes lithium-ion diffusion at electrode/electrolyte interface but also decreases the charge transfer resistance. Finally, the electrochemical performances of full cell of LATP-LNMO or P-LNMO cathode vs Li4Ti5O12 anode are investigated. The energy density can be achieved to 270 Wh·Kg-1 at -20 °C if using LATP-LNMO, which is much better than that of P-LNMO.

In vivo evaluation of CaO-SiO2-P2O5-B2O3 glass-ceramics coating on Steinman pins.

Science.gov (United States)

Lee, Jae Hyup; Hong, Kug Sun; Baek, Hae-Ri; Seo, Jun-Hyuk; Lee, Kyung Mee; Ryu, Hyun-Seung; Lee, Hyun-Kyung

2013-07-01

Surface coating using ceramics improves the bone bonding strength of an implant. We questioned whether a new type of glass-ceramics (BGS-7) coating (CaO-SiO2 -P2 O5 -B2 O3 ) would improve the osseointegration of Steinman pins (S-pins) both biomechanically and histomorphometrically. An in vivo study was performed using rabbits by inserting three S-pins into each iliac bone. The pins were 2.2-mm S-pins with a coating of 30-μm-thick BGS-7 and 550-nm-thick hydroxyapatite (HA), as opposed to an S-pin without coating. A tensile strength test and histomorphometrical evaluation was performed. In the 2-week group, the BGS-7 implant showed a significantly higher tensile strength than the S-pin. In the 4- and 8-week groups, the BGS-7 implants had significantly higher tensile strengths than the S-pins and HA implants. The histomorphometrical study revealed that the BGS-7 implant had a significantly higher contact ratio than the S-pin and HA implants in the 4-week group. The biomechanical and histomorphometrical tests showed that the BGS-7 coating had superior bone bonding properties than the groups without the coating from the initial stage of insertion. The BGS-7 coating of an S-pin will enhance the bone bonding strength, and there might also be an advantage in human bone bonding. © 2013, Copyright the Authors. Artificial Organs © 2013, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Three-dimensional Ag2O/Bi5O7I p-n heterojunction photocatalyst harnessing UV-vis-NIR broad spectrum for photodegradation of organic pollutants.

Science.gov (United States)

Chen, Yannan; Zhu, Gangqiang; Hojamberdiev, Mirabbos; Gao, Jianzhi; Zhu, Runliang; Wang, Chenghui; Wei, Xiumei; Liu, Peng

2018-02-15

Ag 2 O nanoparticles-loaded Bi 5 O 7 I microspheres forming a three dimensional Ag 2 O/Bi 5 O 7 I p-n heterojunction photocatalyst with wide-spectrum response were synthesized in this study. The results of transmission electron microscopy observations revealed that the Ag 2 O nanoparticles with the diameter of ca. 10-20nm were distributed on the surfaces of Bi 5 O 7 I nanosheets. The as-synthesized Ag 2 O/Bi 5 O 7 I exhibited an excellent wide-spectrum response to wavelengths ranging from ultraviolet (UV) to near-infrared (NIR), indicating its potential for effective utilization of solar energy. Compared with pure Bi 5 O 7 I, the Ag 2 O/Bi 5 O 7 I composite also demonstrated excellent photocatalytic activity for the degradation of Bisphenol A and phenol in aqueous solution under visible LED light irradiation. Among samples, the 20% Ag 2 O/Bi 5 O 7 I composite photocatalyst showed the highest photocatalytic activity for the degradation of Bisphenol A and phenol in aqueous solution. In addition, the 20% Ag 2 O/Bi 5 O 7 I composite also exhibited a photocatalytic activity for the degradation of Bisphenol A under NIR light irradiation. The improved photocatalytic activity is attributed to the formation of a p-n heterojunction between Ag 2 O and Bi 5 O 7 I, allowing the efficient utilization of solar energy (from UV to NIR) and high separation efficiency of photogenerated electron-hole pairs. The present work is desirable to explore a possible avenue for the full utilization of solar energy. Copyright © 2017 Elsevier B.V. All rights reserved.

In-vitro study of copper doped SiO{sub 2}-CaO-P{sub 2}O{sub 5} system for bioactivity and antimicrobial properties

Energy Technology Data Exchange (ETDEWEB)

Kaur, Kulwinder; Singh, K. J., E-mail: kanwarjitsingh@yahoo.com; Anand, Vikas [Department of Physics, Guru Nanak Dev University, Amritsar-143005 (India); Kaur, Harpreet; Arora, Daljit Singh [Department of Microbiology, Guru Nanak Dev University, Amritsar-143005 (India)

2015-08-28

Samples of the xCuO-(45-x)CaO-10P{sub 2}O{sub 5}-45SiO{sub 2} system (x varies from 0 to 4 mole%) have been synthesized for application as biomaterials to slow or inhibit the growth of living organisms (fungi and other pathogenic microorganisms) by the combination of sol-gel and co-precipitation processes. Prepared samples have been characterized by X-Ray Diffraction, Fourier Transform Infra-Red and Field Emission Scanning Electron Microscopy techniques before and after immersion in simulated body fluid. Antimicrobial activity of samples has been investigated against Staphylococcus aureus. Releasing of Cu{sup 2+}and other ions in the simulated body fluid has been determined by Atomic Absorption Spectroscopy to ensure the use of prepared material as biomaterial with good antibacterial properties.

Crystal structure of molybdenyl tetrapolyphosphate (MoO)2P4O13

International Nuclear Information System (INIS)

Minacheva, L.Kh.; Antsishkina, A.S.; Lavrov, A.V.; Sakharova, V.G.; Nikolaev, V.P.; Poraj-Koshits, M.A.

1979-01-01

The structure of crystals of molybdenyl tetrapolyphosphate [MoO] 2 P 4 O 13 has been determined. The substance is crystallized in the monoclinic syngony with the following parameters of the elementary cell: a=8.288 (2); b=10.690 (3); c=19.529 (5) A; γ=106.7 (3) deg. The structural units are molybdenyl groups MoO(3 + ) and polyphosphate anions P 4 O 13 (6 - ) that are composed of four PO 4 tetrahedrons whose apexes are connected in series. Three atoms of phasphate anion form the ''internal'' P-O-P bridges, while the remaining oxygen atoms, the ''external'' P-O-Mo bridges. The optimum temperature of crystals synthesis is 450 - 460 deg C. A mixture of phase of MoO 2 P 4 O 13 and Mo(PO 3 ) 3 is obtained as temperature is raised up to 600 deg C. Consequently, the stepwise dissociation of molybdenyl ions with the splitting off of oxygen and gradual reduction in the degree of molybdenum oxidation (MoO 2 ) 2+ → (MoO) 3+ → Mo 3+ occurs in the solution

Microestructura y propiedades de materiales cerámicos PZT con control de crecimiento de grano

Directory of Open Access Journals (Sweden)

Celi, L. A.

1999-10-01

Full Text Available Lead zirconate titanate ceramic powders have been surface modified by using phosphor esther 0.3% in volume. The phosphorous modification gave higher densities at lower temperatures associated with a reduction of the weight losses during the densification process. From the relationships between ceramic processing and microstructure, it was established that the phosphorous surface modification allows the effective grain growth control as well a higher homogeneity in the grain size distribution.

Se ha realizado un proceso de modificación superficial con ester fosfato al 0.3% en volumen, sobre polvo cerámico de titanato circonato de plomo, PZT. Se observa que el material modificado con fósforo presenta una mayor densificación aparente a una temperatura menor unida a una reducción de las pérdidas de peso durante el proceso de densificación. Se han establecido las relaciones entre el procesamiento y las microestructuras del material PZT sin modificar y el modificado. Se evidencia un control del crecimiento de grano y una mayor homogeneidad en la distribución de tamaños de grano en el material modificado.

In vitro cell culture pO2 is significantly different from incubator pO2.

Science.gov (United States)

Bambrick, L L; Kostov, Y; Rao, G

2011-07-01

Continuous noninvasive monitoring of peri-cellular liquid phase pO2 in adherent cultures is described. For neurons and astrocytes, this approach demonstrates that there is a significant difference between predicted and observed liquid phase pO2. Particularly at low gas phase pO2s, cell metabolism shifts liquid phase pO2 significantly lower than would be predicted from the O2 gas/air equilibrium coefficient, indicating that the cellular oxygen uptake rate exceeds the oxygen diffusion rate. The results demonstrate the need for direct pO2 measurements at the peri-cellular level, and question the widely adopted current practice of relying on setting the incubator gas phase level as means of controlling pericellular oxygen tension, particularly in static culture systems that are oxygen mass transfer limited. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

Thermodynamic studies of thorium phosphate diphosphate and phase investigations of Th-P-O and Th-P-H2O systems

International Nuclear Information System (INIS)

Rawat, Deepak; Dash, Smruti; Joshi, A.R.

2014-01-01

Highlights: • Δ f H m o (298.15K)andC p,m o (T) of Th 2 P 3 O 13 H 3 (cr), Th 2 P 3 O 12 H(cr), α-Th 4 P 6 O 23 (cr) and β-Th 4 P 6 O 23 (cr) were measured. • Thermo-chemical reaction scheme was formulated to calculate the standard molar enthalpy of formation of β-Th 4 (PO 4 ) 4 P 2 O 7 (cr). • The thermodynamic functions of the compounds present in Th-P-O and Th-P-H 2 O systems have been estimated. • The Gibbs phase diagram and predominant area diagrams for Th-P-O system have been calculated. • E H –pH diagram of Th-P-H 2 O system has been computed to determine stability of β-Th 4 P 6 O 23 (cr) in the ground water. - Abstract: The standard molar enthalpy of formation of thorium phosphate diphosphate, β-Th 4 (PO 4 ) 4 P 2 O 7 (cr) has been determined using an isoperibol solution calorimeter, a differential scanning calorimeter and phase transition data of high temperature calorimeter. The enthalpy of precipitation of thorium phosphate-hydrogenphosphate hydrate, Th 2 (PO 4 ) 2 (HPO 4 )·H 2 O(cr), was measured at 298.15 K using an isoperibol solution calorimeter. Heat capacities of α-Th 4 (PO 4 ) 4 P 2 O 7 (cr) and β-Th 4 (PO 4 ) 4 P 2 O 7 (cr) were measured using a Differential Scanning Calorimeter. Combining these experimental data, and other auxiliary data from the literature, thermo-chemical reaction scheme was devised to calculate the standard molar enthalpy of formation of β-Th 4 (PO 4 ) 4 P 2 O 7 (cr) to be {−10565.5 ± 13.6} kJ mol −1 . The thermodynamic functions for β-Th 4 (PO 4 ) 4 P 2 O 7 (cr) have been computed using Δ f H m o (298.15K),C p,m o (T) and literature data. The Gibbs phase diagram and predominant area diagrams for Th-P-O system have been computed using the thermodynamic information of the various phase present in Th-P, P-O and ThO 2 -P 2 O 5 systems. E H –pH diagram of Th-P-H 2 O system has been computed to determine stability of Th 4 P 6 O 23 (cr) in ground water

Effect of alkali earth oxides on hydroxy-carbonated apatite nano layer formation for SiO2-BaO-CaO-Na2O-P2O5 glass system

Science.gov (United States)

Kiran, P.; Ramakrishna, V.; Shashikala, H. D.; Udayashankar, N. K.

2017-11-01

Barium soda lime phosphosilicate [(58SiO2-(32 - x)BaO- xCao-6Na2O-4P2O5 (where x = 15, 20, 25 and 30 mol%)] samples were synthesised using conventional sol-gel method at 700 °C sintering temperature. Thermal, structural properties were studied using thermo gravimetric analysis and differential thermal analysis, X-ray diffraction, scanning electron microscopy, fourier transform infrared and Raman spectroscopy. Using Raman spectra non-bridging oxygen concentrations were estimated. The hydroxy-carbonated apatite (HCA) layer formation on samples was analysed for 7 days using simulated body fluid (SBF) soaked samples. The growth of HCA layers self-assembled on the sample surface was discussed as a function of NBO/BO ratio. Results indicated that the number of Ca2+ ions released into SBF solution in dissolution process and weight loss of SB-treated samples vary with NBO/BO ratio. The changes in NBO/BO ratios were observed to be proportional to HCA forming ability of barium soda lime phosphosilicate glasses.

New alkali metal diphosphates how materials to preserve the security of the environment: CsNaCu(P2O7), Rb2Cu(P2O7) and CsNaCo(P2O7) synthesis and crystal structure determination

Science.gov (United States)

Chernyatieva, Anastasiya; Filatova, Alyona; Spiridonova, Dariya; Krivovichev, Sergey

2013-04-01

In this work we describe preliminary results of the synthesis and of a crystal-chemical study of synthetic phosphates with transition metals. Due to the increasing requirements for environmental safety specialists from various industries, we are searching for sustainable forms of immobilization of hazardous waste during storage. We are also developing a component-based waste for new materials. In our continued exploratory synthesis of compounds containing transition-metals, we were able to produce the new diphosphate phases CsNaCu(P2O7), Rb2Cu(P2O7) and CsNaCo(P2O7). A crystal chemical study has allowed us to identify new phosphates. Crystals of CsNaCu(P2O7) (Phase 1) is orthorhombic, crystallizes in space group Pmn21, with a = 5.147(8), b = 15.126(2), c = 9.717(2) Å, V = 756.20 Å3, R1 = 0.066 and Rb2Cu(P2O7) (Phase 2) is orthorhombic as well, crystallizes in space group Pmcn, with a = 5.183(8), b = 10.096(1), c = 15.146(3) Å, V = 793.55 Å3, R1 = 0.063, they have been obtained by high-temperature reaction of RbNO3, CsNO3, Cu(NO3)2, NaOH and (NH4)4P2O7. Synthetic crystals of the phosphate of copper and rubidium were studied in detail by us on the structures of Rb2Cu(P2O7) and Rb2Cu3(P2O7)2 - new alkali metal copper diphosphates (CHERNYATIEVA et al., 2008). Here we report the synthesis, the structure and the properties of the title compounds and we compare these phases with the previously discovered K2CuP2O7 (ELMAADI et al., 1995) and CsNaMnP2O7 (HUANG et al., 1998). These structures crystallize in other space groups, although their structures are also based on 2-D layers, formed by P2O7 groups combined with polyhedra of the transition metals (CHERNYATIEVA et al., 2012). A crystal chemical study has allowed us to identify even new diphosphates CsNaCu(P2O7) (Phase 3). Crystals of CsNaCoP2O7 is monoclinic, space group P 21/n, with a = 7,424(2), b = 7,648(1), c = 12,931(3)Å, β = 90,71(2)° , V = 734.2(3) Å3 and R1 = 0.060. The structure is based framework of Co

Al2O3 Passivation Effect in HfO2·Al2O3 Laminate Structures Grown on InP Substrates.

Science.gov (United States)

Kang, Hang-Kyu; Kang, Yu-Seon; Kim, Dae-Kyoung; Baik, Min; Song, Jin-Dong; An, Youngseo; Kim, Hyoungsub; Cho, Mann-Ho

2017-05-24

The passivation effect of an Al 2 O 3 layer on the electrical properties was investigated in HfO 2 -Al 2 O 3 laminate structures grown on indium phosphide (InP) substrate by atomic-layer deposition. The chemical state obtained using high-resolution X-ray photoelectron spectroscopy showed that interfacial reactions were dependent on the presence of the Al 2 O 3 passivation layer and its sequence in the HfO 2 -Al 2 O 3 laminate structures. Because of the interfacial reaction, the Al 2 O 3 /HfO 2 /Al 2 O 3 structure showed the best electrical characteristics. The top Al 2 O 3 layer suppressed the interdiffusion of oxidizing species into the HfO 2 films, whereas the bottom Al 2 O 3 layer blocked the outdiffusion of In and P atoms. As a result, the formation of In-O bonds was more effectively suppressed in the Al 2 O 3 /HfO 2 /Al 2 O 3 /InP structure than that in the HfO 2 -on-InP system. Moreover, conductance data revealed that the Al 2 O 3 layer on InP reduces the midgap traps to 2.6 × 10 12 eV -1 cm -2 (compared to that of HfO 2 /InP, that is, 5.4 × 10 12 eV -1 cm -2 ). The suppression of gap states caused by the outdiffusion of In atoms significantly controls the degradation of capacitors caused by leakage current through the stacked oxide layers.

Tradução e adaptação transcultural do "Harris Hip Score modificado por Byrd" Translation and transcultural adaptation of the modified Harris Hip Score

Directory of Open Access Journals (Sweden)

Rodrigo Pereira Guimarães

2010-01-01

Full Text Available OBJETIVO: As artroscopias do quadril têm sido utilizadas tanto para fins diagnósticos, como para fins terapêuticos, fazendo parte do arsenal rotineiro dos cirurgiões do quadril. Devido a necessidade de avaliação dos resultados artroscópicos, Byrd propôs a modificação do "Harris Hip Score", realizando a avaliação da dor e função. O objetivo deste estudo foi traduzir e adaptar transculturalmente o protocolo de avaliação do "Harris Hip Score" modificado por Byrd, utilizado nas artroscopias do quadril. MÉTODO: O método utilizado constituiu em: 1 tradução inicial, 2 retrotradução, 3 pré - teste e 4 teste definitivo. RESULTADOS: A versão em português foi aplicada em 30 pacientes com afecções do quadril para verificar o nível de compreensão do protocolo. Foram realizadas mudanças e substituições de termos e expressões que não foram entendidas pelos pacientes durante o pré-teste e realizada a versão final em consenso. Novamente a versão final do questionário foi aplicada com 100% de entendimento pelos pacientes. CONCLUSÃO: disponibiliza-se assim a versão final em português do questionário "Harris Hip Score" modificado por Byrd. A validação desta versão já está em desenvolvimento.OBJECTIVE: Hip arthroscopy has been used for diagnostic as well as therapeutic purposes, and it is part of the daily arsenal of hip surgeons. Due to the need for arthroscopic evaluation of the results, Byrd proposed a modification of the Harris Hip Score by assessing pain and function. This study aimed to translate and cross-culturally adapt the evaluation protocol of the modified Harris Hip Score used in hip arthroscopies. METHOD: The method used consisted of: 1 an initial translation, 2 a back translation, 3 a pre-test and 4 a final test. RESULTS: The Portuguese version was used with 30 patients with hip disorders to determine the level of comprehension of the protocol. Expressions which were not understood by patients during the

Modified crop model estimation of depleted and potential soybean yield=Modelo modificado de estimação da produtividade deplecionada e potencial da soja

Directory of Open Access Journals (Sweden)

Paulo Augusto Manfron

2012-10-01

Full Text Available Despite the great importance of soybeans in Brazil, there have been few applications of soybean crop modeling on Brazilian conditions. Thus, the objective of this study was to use modified crop models to estimate the depleted and potential soybean crop yield in Brazil. The climatic variable data used in the modified simulation of the soybean crop models were temperature, insolation and rainfall. The data set was taken from 33 counties (28 Sao Paulo state counties, and 5 counties from other states that neighbor São Paulo. Among the models, modifications in the estimation of the leaf area of the soybean crop, which includes corrections for the temperature, shading, senescence, CO2, and biomass partition were proposed; also, the methods of input for the model’s simulation of the climatic variables were reconsidered. The depleted yields were estimated through a water balance, from which the depletion coefficient was estimated. It can be concluded that the adaptation soybean growth crop model might be used to predict the results of the depleted and potential yield of soybeans, and it can also be used to indicate better locations and periods of tillage.Aplicações de modelos de previsão de produtividade na cultura da soja são muito raros. Assim, o objetivo desta pesquisa foi realizar a estimação da produtividade deplecionada e potencial da cultura de soja, usando modelos de previsão modificados. Os dados climáticos utilizados nos modelos de simulação foram a temperatura, precipitação e insolação. Os dados foram proveniente de 33 municípios (28 do estado de São Paulo, e cinco municípios de estados vizinhos. Dentre os modelos propostos modificados está a estimação da área foliar da soja, com correções para temperatura, sombreamento, senescência, CO2, partição de biomassa, bem como os métodos de simulação das variávies climáticas do “input” para o modelo. As produções deplecionadas foram estimadas através do balanço

Comportamiento eléctrico de vidrios funcionales con base en TeO2

Directory of Open Access Journals (Sweden)

Terny, S.

2014-02-01

Full Text Available In this paper we study the structural and electrical behavior of glass-ceramic material of general formula: xMgO (1-x (0.5V2O5.0.5MoO32TeO2 (0≤x≤0.9 through measurements of density, molar volume, oxygen packing density (OPD, differential scanning calorimetry (DSC and Raman spectroscopy: electric behavior was studied by impedance spectroscopy. We found that magnesium cation induces the growth of slightly crystallized areas inside the material. Those nanocrystallizations were detected to a greater extent by atomic force microscopy (AFM and in lesser extent by X-ray diffraction (XRD. Regarding the electrical measurements, it can be established that magnesium cation does not act as good ionic conductor in this material.En este trabajo estudiamos la estructura de un material vítreo cuya fórmula general es: xMgO(1-x(0.5V2O5.0.5MoO32TeO2 (0≤x≤0.9, mediante medidas de densidad, volumen molar, empaquetamiento denso de oxigeno (OPD, calorimetría diferencial de barrido (DSC y espectroscopia Raman; el comportamiento eléctrico se estudió por medio de espectroscopia de impedancia. Encontramos que el catión magnesio induce el crecimiento de zonas levemente cristalizadas dentro del material. Dichas nanocristalizaciones pudieron ser detectadas en mayor medida por microscopia de fuerzas atómicas (AFM y en menor medida se pudo observar en los patrones de difracción de Rayos X (DRX. Con respecto a las propiedades eléctricas, se puede establecer que el catión magnesio no actúa como buen conductor iónico en este material.

Sc2[Se2O5]3: The First Rare-Earth Metal Oxoselenate(IV with Exclusively [Se2O5]2− Anions

Directory of Open Access Journals (Sweden)

Stefan Greiner

2018-04-01

Full Text Available The scandium oxodiselenate(IV Sc2[Se2O5]3 was synthesized via solid-state reactions between scandium sesquioxide (Sc2O3 and selenium dioxide (SeO2 with thallium(I chloride (TlCl as fluxing agent in molar ratios of 1:4:2. Evacuated fused silica ampoules were used as reactions vessels for annealing the mixtures for five days at 800 °C. The new scandium compound crystallizes in the triclinic space group P 1 ¯ with the lattice parameters a = 663.71(5 pm, b = 1024.32(7 pm, c = 1057.49(8 pm, α = 81.034(2°, β = 87.468(2°, γ = 89.237(2° and Z = 2. There are two distinct Sc3+ positions, which show six-fold coordination by oxygen atoms as [ScO6]9− octahedra (d(Sc–O = 205–212 pm. Three different [Se2O5]2− anions provide these oxygen atoms with their terminal ligands (Ot. Each of the six selenium(IV central atoms exhibit a stereochemically active lone pair of electrons, so that all [Se2O5]2− anions consist of two ψ1-tetrahedral [SeO3]2− subunits (d(Se–Ot = 164–167 pm, d(Se–Ob = 176–185 pm, ∢(O–Se–O = 93–104° sharing one bridging oxygen atom (Ob with ∢(Se–Ob–Se = 121–128°. The vibrational modes of the complex anionic [Se2O5]2− entities were characterized via single-crystal Raman spectroscopy.

Perfil sintomático de los pacientes con Enfermedad Renal Crónica Estadio 4 y 5

Directory of Open Access Journals (Sweden)

Daniel Gutiérrez Sánchez

Full Text Available Resumen Introducción: Los pacientes con Enfermedad Renal Crónica Avanzada (ERCA experimentan una gran variedad de síntomas que afectan negativamente la calidad de vida del paciente. Objetivos: Determinar la prevalencia e intensidad de síntomas y analizar su asociación con el filtrado glomerular (FG y la comorbilidad. Material y Método: Estudio transversal en el que se describe la sintomatología del paciente con ERCA en diálisis y prediálisis y se realiza un análisis de la asociación de los síntomas con el FG y la comorbilidad. Para la evaluación de síntomas se utilizó la versión española modificada de la Palliative care Outcome Scale-Symptoms Renal (POS-S Renal, un cuestionario validado para evaluar la sintomatología en esta población. La comorbilidad fue evaluada con el índice de comorbilidad de Charlson modificado (ICCm. Resultados: 180 pacientes con ERCA fueron incluidos en este estudio. Más del 44% de pacientes describieron debilidad, dolor, depresión y dificultad para dormir. Se encontraron diferencias significativas en ambos grupos para síntomas como la debilidad (p=0.027, poca movilidad (p=0.018, somnolencia (p=0.03, estreñimiento (p=0.015 y piernas inquietas (p<0.01. El declive de la función renal se asoció con la sintomatología (p=0,04. No encontramos asociación entre la comorbilidad y la sintomatología (p=0,15. Conclusiones: Los pacientes con ERCA sufren una elevada carga de síntomas. La evaluación y monitorización sistemática de síntomas mediante herramientas como el POS-S Renal puede ser útil en el ámbito clínico y en investigación. La integración de los Cuidados Paliativos en los Servicios de Nefrología puede contribuir a la optimización del manejo sintomático en esta población.

Dechlorination and Stabilization of Molten Salt Waste by Using xSiO2-yAl2O3- zP2O5 at Melting Temperature

International Nuclear Information System (INIS)

Park, Hwanseo; Kim, Intae; Kim, Hwanyoung; Kim, Joonhyung

2007-01-01

Molten salt waste, which is generated from the pyroprocess to separate uranium and trans-uranium elements from spent nuclear fuel, has been interested to researchers in the radioactive waste management. For its final disposal, direct immobilization into a suitable host matrix or indirect solidification by other chemical routes requires the control of chlorides and its volatility since molten salt wastes mainly consist of volatile metal chlorides. Glass-bonded sodalite (Na 6 M 2 Al 6 Si 6 O 24 Cl 2 , 1-5) suggested by Argonne National Laboratory (ANL), to the present, could be a practical solution to the immobilization of this waste, where waste form can be fabricated at about 915 .deg., lower than the melting temperature of many borosilicate glasses ( -1150 .deg.). A wet dechlorination to oxides or a thermal conversion into borate glass was suggested to remove Cl from salt waste (6-7) and it seemed that the preference of radionuclides for the intended chemical conversions or immobilizations described above could be hardly accomplished or failed, except the phosphate precipitation method suggested by Volkovich and his co-workers (8). Our research group suggested a novel method to treat molten salt waste, named GRSS (Gel-Route Stabilization/Solidification) using Si-P-Al system as a gel-forming system. This showed little vaporization during high temperature process and good leach resistance on Cs and Sr. As another method, this study suggested a method to stabilize molten salt wastes by using xSiO 2 -yAl 2 O 3 - zP 2 O 5 material. GRSS method is considered as a 'reaction system' to completely convert salt waste into stable product while the inorganic material used in this study is a stabilizer for salt wastes. Using this material, this study investigated the reactivity on different metal chlorides, thermal stability, leach-resistance and etc

Influence of fluoride additions on biological and mechanical properties of Na2O-CaO-SiO2-P2O5 glass-ceramics.

Science.gov (United States)

Li, H C; Wang, D G; Hu, J H; Chen, C Z

2014-02-01

Two series of Na2O-CaO-SiO2-P2O5 glass-ceramics doped with NH4HF2 (G-NH4HF2) or CaF2 (G-CaF2) have been prepared by sol-gel method. The glass-ceramic phase composition and morphology were characterized by X-ray diffraction (XRD) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS). The mechanical properties and thermal expansion coefficient were measured by a microhardness tester, an electronic tensile machine and a thermal expansion coefficient tester. The structure difference between these two glass-ceramics was investigated by Fourier transform infrared spectroscopy (FTIR), and the in vitro bioactivity of the glass-ceramics was determined by in vitro simulated body fluid (SBF) immersion test. The hemolysis test, in vitro cytotoxicity test, systemic toxicity test and the implanted experiment in animals were used to evaluate the biocompatibility of the glass-ceramics. The mechanical properties of sample G-NH4HF2 are lower than that of sample G-CaF2, and the bioactivity of sample G-NH4HF2 is better than that of sample G-CaF2. The thermal expansion coefficients of these two glass-ceramics are all closer to that of Ti6Al4V. After 7 days of SBF immersion, apatites were induced on glass-ceramic surface, indicating that the glass-ceramics have bioactivity. The hemolysis test, in vitro cytotoxicity test and systemic toxicity test demonstrate that the glass-ceramics do not cause hemolysis reaction, and have no toxicity to cell and living animal. The implanted experiment in animals shows that bone tissue can form a good osseointegration with the implant after implantation for two months, indicating that the glass-ceramics are safe to serve as implants. Copyright © 2013 Elsevier B.V. All rights reserved.

Substratos alternativos para produção de repolho e beterraba em consórcio e monocultivo

Directory of Open Access Journals (Sweden)

Luiz A. de M. Costa

2014-02-01

Full Text Available Objetivou-se, com este trabalho, determinar o desempenho dos substratos alternativos no desenvolvimento radicular e na parte aérea da beterraba e do repolho, tal como no seu comportamento no campo em consórcio e monocultivo. Foram realizados dois experimentos em blocos casualizados cujos tratamentos foram: T0 (substrato Plantmax®; T1 (100% de composto; T2 (50% de composto, 20% de areia, 20% de casca de arroz carbonizada e 10% de pó de basalto; T3 (45% de composto, 20% de areia, 20% de casca de arroz carbonizada e 15% de pó de basalto; T4 (40% de composto, 5% de areia e 15% casca de arroz carbonizada e 20% de pó de basalto e T5 (35% de composto, 5% de areia e 15% de casca de arroz carbonizada e 25% de pó de basalto. O primeiro experimento foi em bandejas de 200 células; o segundo foi no campo em monocultivo e consociado com tratamentos constituídos pelos substratos utilizados em bandeja. No canteiro para o repolho os substratos em monocultivo e consorciado apresentaram acúmulos semelhantes de massa seca da cabeça; já para beterraba o diâmetro da raiz com o substrato comercial apresentou superioridade para o consórcio comparado ao monocultivo, enquanto para a produção de beterraba e repolho em sistema de monocultivo e consorciado podem ser recomendados os substratos alternativos.

Corrosion resistance properties of enamels with high B2O3-P2O5 content to molten aluminum

International Nuclear Information System (INIS)

Zhou, M.; Li, K.; Shu, D.; Sun, B.D.; Wang, J.

2003-01-01

Anticorrosive properties of borophosphate and boron-free enamels to molten aluminum were investigated using SEM and electron probe. Carbonates of alkali metal and alkaline earth metal were added in an appropriate weight ratio to achieve desired melting temperature of the enamels. SEM examination on the solidified interface between the enamels and aluminum alloy show that the enamels can spread slightly on aluminum alloy. For anticorrosive sample of borophosphate enamel, phosphorus was not detected by electron probe at the side of aluminum alloy near the interface, but silicon was detected in the silica-free enamels side. For the sample of boron-free enamels, however, phosphorus was found at the side of aluminum alloy near the interface. It was revealed that the enamels with high B 2 O 3 -P 2 O 5 content have high corrosion resistance to molten aluminum

Uso de péptidos neurales modificados como tratamiento de una lesión en la médula espinal: una vision general

Directory of Open Access Journals (Sweden)

Paola Suárez-Meade

2015-01-01

Full Text Available La lesión de la médula espinal ( lme es un fenómeno que daña al sistema nervioso central ( snc , y produce la pérdida de la actividad fisiológica por debajo del sitio de la lesión. Actualmente no existe algún tratamiento efectivo para la lme en el campo clínico. El papel del sistema inmune a través de la autorreactividad protectora ( ap —un fenómeno fisiológico desa - rrollado después de la lme — puede ser de gran importancia para inducir neuroprotección. La ap puede estimularse con el uso de péptidos neurales modificados ( pnm procedentes de componentes neurales como la proteína básica de la mielina. El presente artículo pretende dar una visión general de esta estrategia terapéutica innovadora que ofrece efectos bené - ficos y un futuro muy alentador. Se revisará el fundamento, los mecanismos y los hallazgos preclínicos más importantes utilizando el pnm a 91. Finalmente, se comentarán los obstáculos a vencer para su aplicación clínica.

Synthesis and study of the triphosphate salt LiSr2P3O10·8H2O

International Nuclear Information System (INIS)

Sotnikova-Yuzhik, V.A.; Peslyak, G.V.

1995-01-01

Lithium triphosphate interaction with strontium nitrate in aqueous solution at 0.3 mole% concentration and 20 deg C is studied. Formation of crystal hydrate LiSr 2 P 3 O 10 ·8H 2 O and amorphous phase of variable composition Li 2,5-0,5x P 3 O 10 ·6H 2 O (0.20≤x≤0.55) is determined. Data on the stability of binary lithium-strontium triphosphate at storage, sequence of chemical and phase transitions under heating are obtained. 5 refs., 4 figs., 3 tabs

Structural aspects of B2O3-substituted (PbO)0.5(SiO2)0.5 glasses

International Nuclear Information System (INIS)

Sudarsan, V.; Kulshreshtha, S.K.; Shrikhande, V.K.; Kothiyal, G.P.

2002-01-01

Lead borosilicate glasses having general formulae (PbO) 0.5-x (SiO 2 ) 0.5 (B 2 O 3 ) x with 0.0≤x≤0.4 and (PbO) 0.5 (SiO 2 ) 0.5-y (B 2 O 3 ) y with 0.0≤y≤0.5 have been prepared by a conventional melt-quench method and characterized by 29 Si, 11 B magic angle spinning (MAS) NMR techniques and infrared spectroscopy, as regards their structural features. From 29 Si NMR results, it has been inferred that with increasing concentration of boron oxide, (PbO) 0.5-x (SiO 2 ) 0.5 (B 2 O 3 )x glasses exhibit a systematic increase in the number of Q 4 structural units of Si at the expense of Q 2 structural units, along with the formation of Si-O-B linkages. On the other hand, for (PbO) 0.5 (SiO 2 ) 0.5-y (B 2 O 3 ) y glasses, there is no direct interaction between SiO 2 and B 2 O 3 in the glass network, as revealed by the 29 Si MAS NMR studies. Boron exists in both trigonal and tetrahedral configurations for these two series of glasses and for the (PbO) 0.5 (SiO 2 ) 0.5-y (B 2 O 3 ) y series of glasses; the relative concentration of these two structural units remains almost constant with increasing B 2 O 3 concentration. In contrast, for (PbO) 0.5-x (SiO 2 ) 0.5 (B 2 O 3 ) x glasses, there is a slight increase in the number of BO 3 structural units above x = 0.2, as there is a competition between SiO 2 and B 2 O 3 for interaction with Pb 2+ , thereby leading to the formation of BO 3 structural units. For both series of glasses, the thermal expansion coefficient is found to decrease with increasing B 2 O 3 concentration, the effect being more pronounced for the (PbO) 0.5-x (SiO 2 ) 0.5 (B 2 O 3 ) x series of glasses due to the increased concentration of Q 4 structural units of silicon and better cross-linking as a result of the formation of Si-O-B-type linkages. (author)

Effect of various SnO2 pH on ZnO/SnO2-composite film via immersion technique

Science.gov (United States)

Malek, M. F.; Mohamed, R.; Mamat, M. H.; Ismail, A. S.; Yusoff, M. M.; Rusop, M.

2018-05-01

ZnO/SnO2-composite film has been synthesized via immersion technique with various pH of SnO2. The pH of SnO2 were varied between 4.5 and 6.5. The optical measurements of the samples were carried out using Varian Cary 5000 UV-Vis spectrophotometer within the range from 350 nm to 800 nm at room temperature in air with a data interval of 1 nm. On the other hand, the optical photoluminescence properties were measured by a photoluminescence spectrometer (PL, model: Horiba Jobin Yvon - 79 DU420A-OE-325) using a He-Cd laser as the excitation source at 325 nm. These highly oriented ZnO/SnO2-composite film are potential for the creation of functional materials, such as the sensors, solar cells and etc.

Via póstero-lateral unilateral para cifoplastia percutánea con balón

OpenAIRE

Ricciardi,Daniel Oscar

2013-01-01

Esta experiencia ha sido realizada en el Hospital Alvarez de Buenos Aires, Argentina en pacientes tratados por el Equipo de Columna Vertebral. El autor ha modificado el método original de punción descrito por Valls y Ottolenghi, lo que permite ubicar al paciente en decúbito lateral y prescinde del instrumental descrito originalmente, como spider y guía que se utilizaban con equipos de rayos X convencionales. El presente trabajo pretende describir en detalle la técnica aplicada para efectuar l...

Studies on the structural stability of Co2P2O7 under pressure

Science.gov (United States)

Wang, W. P.; Pang, H.; Jin, M. L.; Shen, X.; Yao, Y.; Wang, Y. G.; Li, Y. C.; Li, X. D.; Jin, C. Q.; Yu, R. C.

2018-05-01

The crystal structural evolution of Co2P2O7 was studied by using in situ high pressure angle dispersive x-ray diffraction with synchrotron radiation. The results demonstrate that the α phase of Co2P2O7 goes through a partially irreversible structural transformation to β phase under pressure. The pressure is conductive to reduce the longest Cosbnd O bond length of the α phase, and then more uniform Cosbnd O bonds and regular hexagonal arrangement of CoO6 octahedra of the β phase are favored. According to the Birch-Murnaghan equation, the fitted bulk modulus B0 is 158.1(±5.6) GPa for α phase and 276.5(±6.5) GPa for β phase. Furthermore, the first-principles calculations show that these two phases of Co2P2O7 have almost equal total energies, and also have similar band structures and spin-polarized density of states at their ground states. This may be the reason why these two phases of Co2P2O7 can coexist in the pressure released state. It is found that the band gap energies decrease with increasing pressure for both phases.

Effect of the thin Ga2O3 layer in n+-ZnO/n-Ga2O3/p-Cu2O heterojunction solar cells

International Nuclear Information System (INIS)

Minami, Tadatsugu; Nishi, Yuki; Miyata, Toshihiro

2013-01-01

The influence of inserting a Ga 2 O 3 thin film as an n-type semiconductor layer on the obtainable photovoltaic properties in Cu 2 O-based heterojunction solar cells was investigated with a transparent conductive Al-doped ZnO (AZO) thin film/n-Ga 2 O 3 thin film/p-Cu 2 O sheet structure. It was found that this Ga 2 O 3 thin film can greatly improve the performance of Cu 2 O-based heterojunction solar cells fabricated using polycrystalline Cu 2 O sheets that had been prepared by a thermal oxidization of copper sheets. The obtained photovoltaic properties in the AZO/Ga 2 O 3 /Cu 2 O heterojunction solar cells were strongly dependent on the deposition conditions of the Ga 2 O 3 films. The external quantum efficiency obtained in AZO/Ga 2 O 3 /Cu 2 O heterojunction solar cells was found to be greater at wavelengths below approximately 500 nm than that obtained in AZO/Cu 2 O heterojunction solar cells (i.e., prepared without a Ga 2 O 3 layer) at equivalent wavelengths. This improvement of photovoltaic properties is mainly attributed to a decrease in the level of defects at the interface between the Ga 2 O 3 thin film and the Cu 2 O sheet. Conversion efficiencies over 5% were obtained in AZO/Ga 2 O 3 /Cu 2 O heterojunction solar cells fabricated using an n-Ga 2 O 3 thin-film layer prepared with a thickness of 40–80 nm at an O 2 gas pressure of approximately 1.7 Pa by a pulsed laser deposition. - Highlights: • We demonstrate high-efficiency Cu 2 O-based p-n heterojunction solar cells. • A non-doped Ga 2 O 3 thin film was used as an n-type semiconductor layer. • The Ga 2 O 3 thin film was prepared at a low temperature by a low damage deposition. • p-type Cu 2 O sheets prepared by thermal oxidization of copper sheets were used. • Conversion efficiencies over 5% were obtained in AZO/n-Ga 2 O 3 /p-Cu 2 O solar cells

Modified E-test by the addition of EDTA-Tris and dimethyl sulfoxide on the potentiation of the effects of some antimicrobials in Pseudomonas aeruginosa strains isolated from bovine mastitis E-test modificado pela adição de Tris-EDTA e dimetilsulfóxido na potencialização do efeito de antimicrobianos em linhagens de Pseudomonas aeruginosa isoladas de mastite bovina

Directory of Open Access Journals (Sweden)

M.G. Ribeiro

2004-10-01

Full Text Available A concentração inibitória mínima-MIC em 30 estirpes de Pseudomonas aeruginosa isoladas de mastite bovina foi avaliada utilizando o E-test padrão e o método modificado, pela adição de Tris-EDTA e DMSO. Os métodos modificados apresentaram redução significativa da MIC das estirpes utilizando a gentamicina, a ciprofloxacina e a norfloxacina.

Fabrication and evaluation of osteoblastic differentiation of human mesenchymal stem cells on novel CaO-SiO2-P2O5-B2O3 glass-ceramics.

Science.gov (United States)

Lee, Jae Hyup; Seo, Jun-Hyuk; Lee, Kyung Mee; Ryu, Hyun-Seung; Baek, Hae-Ri

2013-07-01

Apatite-wollastonite glass-ceramics have high mechanical strength, and CaO-SiO2 -B2 O3 glass-ceramics showed excellent bioactivity and high biodegradability. A new type of CaO-SiO2 -P2 O5 -B2 O3 system of bioactive glass-ceramics (BGS-7) was fabricated, and the effect and usefulness was evaluated via bioactivity using simulated body fluid and human mesenchymal stem cells (hMSCs). The purpose of this study was to compare BGS-7 and hydroxyapatite (HA) using hMSCs in order to evaluate the bioactivity of BGS-7 and its possibility as a bone graft extender. Alkaline phosphatase (ALP) staining, ALP activity, cell proliferation 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay, Alizarin Red-S (AR-S) staining, calcium levels, the mRNA expression of ALP, osteocalcin, osteopontin, and runt-related transcription factor 2 (runx-2) using reverse-transcription polymerase chain reaction (RT-PCR) and the protein expression of osteocalcin and runx-2 using Western blot were measured by transplanting hMSC onto a tissue culture plate, HA, and BGS-7. The ALP staining and AR-S staining of BGS-7 was greater than that of HA and control. The ALP value of BGS-7 was significantly higher than that of HA and control. The MTS results showed that BGS-7 had a higher value than the groups transplanted onto HA and control on day 15. The calcium level was higher than the control in both HA and BGS-7, and was especially high in BGS-7. There were more mineral products on BGS-7 than on the HA when analyzed by scanning electron microscopy. The mRNA expression of ALP, osteopontin, osteocalcin, and runx-2 were higher on BGS-7 than on HA and the control when analyzed by RT-PCR. The relative gene expression of osteopontin and runx-2 were found to be higher on BGS-7 than on HA and the control by Western blot. Accordingly, it is predicted that BGS-7 would have high biocompatibility and good osteoconductivity, and presents a possibility as a new

Properties and Crystallization Phenomena in Li2Si2O5–Ca5(PO4)3F and Li2Si2O5–Sr5(PO4)3F Glass–Ceramics Via Twofold Internal Crystallization

Science.gov (United States)

Rampf, Markus; Dittmer, Marc; Ritzberger, Christian; Schweiger, Marcel; Höland, Wolfram

2015-01-01

The combination of specific mechanical, esthetic, and chemical properties is decisive for the application of materials in prosthodontics. Controlled twofold crystallization provides a powerful tool to produce special property combinations for glass–ceramic materials. The present study outlines the potential of precipitating Ca5(PO4)3F as well as Sr5(PO4)3F as minor crystal phases in Li2Si2O5 glass–ceramics. Base glasses with different contents of CaO/SrO, P2O5, and F− were prepared within the glasses of the SiO2–Li2O–K2O–CaO/SrO–Al2O3–P2O5–F system. Preliminary studies of nucleation by means of XRD and scanning electron microscopy (SEM) of the nucleated base glasses revealed X-ray amorphous phase separation phenomena. Qualitative and quantitative crystal phase analyses after crystallization were conducted using XRD in combination with Rietveld refinement. As a main result, a direct proportional relationship between the content of apatite-forming components in the base glasses and the content of apatite in the glass–ceramics was established. The microstructures of the glass–ceramics were investigated using SEM. Microstructural and mechanical properties were found to be dominated by Li2Si2O5 crystals and quite independent of the content of the apatite present in the glass–ceramics. Biaxial strengths of up to 540 MPa were detected. Ca5(PO4)3F and Sr5(PO4)3F influence the translucency of the glass–ceramics and, hence, help to precisely tailor the properties of Li2Si2O5 glass–ceramics. The authors conclude that the twofold crystallization of Li2Si2O5–Ca5(PO4)3F or Li2Si2O5–Sr5(PO4)3F glass–ceramics involves independent solid-state reactions, which can be controlled via the chemical composition of the base glasses. The influence of the minor apatite phase on the optical properties helps to achieve new combinations of features of the glass–ceramics and, hence, displays new potential for dental applications. PMID:26389112

Observation of the strongest 5s2 5p6 5d-(5s2 5p5 5d6s+5s25p6 7p) transitions in Au XI to Bi XV ions

International Nuclear Information System (INIS)

Churilov, S.S.; Joshi, Y.N.

2001-01-01

The spectra of gold till bismuth were studied in the 90-135 A region. Nine most intense lines belonging to the 5s 2 5p 6 5d-5s 2 5p 5 5d6s array were identified in Au XI to Bi XV ions. The 5s 2 5p 6 7p 2 P 3/2,1/2 levels in Au XI and the 5s 2 5p 6 7p 2 P 3/2 level in Hg XII were also identified. The observed wavelengths and intensities agree quite well with the Hartree-Fock calculations. (orig.)

Thermal and fragility studies on microwave synthesized K_2O-B_2O_3-V_2O_5 glasses

International Nuclear Information System (INIS)

Harikamalasree; Reddy, M. Sudhakara; Viswanatha, R.; Reddy, C. Narayana

2016-01-01

Glasses with composition xK_2O–60B_2O_3–(40-x) V_2O_5 (15 ≤ x ≤ 39 mol %) was prepared by an energy efficient microwave method. The heat capacity change (ΔC_p) at glass transition (T_g), width of glass transition (ΔT_g), heat capacities in the glassy (C_p_g) and liquid (C_p_l) state for the investigated glasses were extracted from Modulated Differential Scanning Calorimetry (MDSC) thermograms. The width of glass transition is less than 30°C, indicating that these glasses belongs to fragile category. Fragility functions [NBO]/(V_m"3T_g) and (ΔC_p/C_p_l)increases with increasing modifier oxide concentration. Increase in fragility is attributed to the increasing coordination of boron. Further, addition of K_2O creates NBOs and the flow mechanism involves bond switching between BOs and NBOs. Physical properties exhibit compositional dependence and these properties increase with increasing K_2O concentration. The observed variations are qualitatively analyzed.

[Mo5VMo7VIO30(BPO4)2(O3P-Ph)6]5-: a phenyl-substituted molybdenum(V/VI) boro-phosphate polyoxometalate.

Science.gov (United States)

Sassoye, Capucine; Norton, Kieran; Sevov, Slavi C

2003-03-10

The title polyanion is the first hybrid borophosphate-phenylphosphonate polyoxometalate. It was structurally characterized as its imidazolium salt, (C(3)N(2)H(5))(5)[Mo(12)O(30)(BPO(4))(2)(O(3)P-Ph)(6)].H(2)O (monoclinic, P2(1)/c, a = 22.120(3) A, b = 13.042(2) A, and c = 32.632(4) A, beta = 101.293(3) degrees ), which was synthesized hydrothermally from imidazole, molybdenum oxide and metal, and boric, phosphoric, and phenylphosphonic acids. The anion is the second example of a new class of polyoxometalates that resemble Dawson anions but where the two pole caps of three edge-sharing MoO(6) octahedra in the latter are replaced by other units, in this case tetrahedral borate sharing corners with three phenylphosphonic groups, [(OB)(O(3)P-Ph)(3)]. The 12 molybdenum atoms forming the two equatorial belts of the cluster are of mixed-valence, five are Mo(V) and seven are Mo(VI), and the resulting five electrons are delocalized. Four of these electrons are paired according to the temperature dependence of the magnetic susceptibility. The new compound is soluble in a mixture of water and pyridine (in equal volumes) as well as in nitromethane, and the anions are intact in these solutions.

Retention of oral microorganisms on conventional and resin-modified glass-ionomer cements Retenção de microrganismos bucais em cimentos de ionômero de vidro convencionais e modificados por resina

Directory of Open Access Journals (Sweden)

Denise PEDRINI

2001-09-01

Full Text Available Secondary caries are a worldwide public and socioeconomic problem. The placement of restorations can lead to the development of environmental conditions favorable to microbial colonization, especially on the tooth/restoration interface, which is a predisposing factor for secondary caries. The aim of this study was to evaluate microbial retention on conventional (Chelon-Fil and Vidrion R and resin-modified (Vitremer and Fuji II LC glass-ionomer cements, in situ, using a hybrid composite resin (Z100 as a control. Twelve volunteers wore Hawley appliances with specimens made of all tested filling materials for 7 days. The specimens were then removed from the appliances and transferred to tubes containing 2.0 ml of Ringer-PRAS. Microorganisms from the samples were inoculated onto blood agar and Mitis Salivarius Bacitracin agar and incubated under anaerobiosis (90% N2, 10% CO2, at 37°C, for 10 and 2 days, respectively. The resin-modified glass-ionomer cements and the composite resin retained the same levels of microorganisms on their surfaces. The resin-modified glass-ionomers retained less mutans streptococci than the composite resin and conventional glass-ionomer cements. The conventional glass-ionomer cements retained less mutans streptococci than the composite resin, but that difference was not statistically significant.A cárie secundária representa problema de saúde pública e socioeconômico no mundo. A restauração de dentes acometidos por cárie pode criar condições favoráveis à proliferação microbiana na superfície do material restaurador ou na interface dente/restauração, criando ambiente propício para o estabelecimento de cárie secundária. O objetivo deste estudo foi avaliar a capacidade de retenção de placa bacteriana em cimentos de ionômero de vidro convencionais (Chelon-Fil e Vidrion R e modificados por resina (Vitremer e Fuji II LC e de resina composta híbrida (Z100, utilizada como controle. Nos testes de retenção

Crystal structure of strontium osmate (8) Sr[OsO5(H2O)]x3H2O

International Nuclear Information System (INIS)

Nevskij, N.N; Ivanov-Ehmin, B.N.; Nevskaya, N.A.; Belov, N.V.; AN SSSR, Moscow. Inst. Kristallografii)

1982-01-01

Crystal structure of the Sr[OsO 5 (H 2 O)]x3H 2 O complex is studied. Rhombic P-cell has the parameters: a=6.426(1), b=7.888(1), c=14.377(5) A, Vsub(c)=729 A 3 . The R-factor equals 0.034. The coordinates of the basis atoms and isotropic temperature corrections, as well as basic interatomic distances, are determined

Lithium superionic conductor Li9.42Si1.02P2.1S9.96O2.04 with Li10GeP2S12-type structure in the Li2S–P2S5–SiO2 pseudoternary system: Synthesis, electrochemical properties, and structure–composition relationships

Directory of Open Access Journals (Sweden)

Satoshi Hori

2016-12-01

Full Text Available Lithium superionic conductors with the Li10GeP2S12 (LGPS-type structure are promising materials for use as solid electrolytes in next-generation lithium batteries. A novel member of the LGPS family, Li9.42Si1.02P2.1S9.96O2.04, and its solid solutions were synthesised by quenching from 1273 K in the Li2S–P2S5–SiO2 pseudoternary system. The material exhibited an ionic conductivity as high as 3.2×10−4 S cm−1 at 298 K, as well as the high electrochemical stability to lithium metal, which was improved by the introduction of oxygen into the LGPS-type structure. An all-solid-state cell with a lithium metal anode and Li9.42Si1.02P2.1S9.96O2.04 as the separator showed excellent performance with a high coulomb efficiency of 100%. Thus, oxygen doping is an effective way of improving the electrochemical stability of LGPS-type structure.