4-Benzyl-6-bromo-2-(4-chlorophenyl)-4H-imidazo[4,5-b]pyridine

OpenAIRE

Selma Bourichi; Youssef Kandri Rodi; Jerry P. Jasinski; Manpreet Kaur; Younes Ouzidan; El Mokhtar Essassi

2017-01-01

In the title compound, C19H13BrClN3, the chlorophenyl ring occupies an equatorial position with respect to the mean plane of the imidazopyridine unit, while the other phenyl ring is twisted by 4.1 (2)° with respect to the mean plane of the imidazopyridine unit. In the crystal, pairwise C—H...Br interactions link the molecules into dimers, forming an R22(16) ring motif. In addition, weak π–π stacking interactions stabilize the crystal packing.

4-Benzyl-6-bromo-2-(4-chlorophenyl-4H-imidazo[4,5-b]pyridine

Directory of Open Access Journals (Sweden)

Selma Bourichi

2017-06-01

Full Text Available In the title compound, C19H13BrClN3, the chlorophenyl ring occupies an equatorial position with respect to the mean plane of the imidazopyridine unit, while the other phenyl ring is twisted by 4.1 (2° with respect to the mean plane of the imidazopyridine unit. In the crystal, pairwise C—H...Br interactions link the molecules into dimers, forming an R22(16 ring motif. In addition, weak π–π stacking interactions stabilize the crystal packing.

Fluorescent investigation of the interactions between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and serum albumin: Synchronous fluorescence determination of serum albumin

International Nuclear Information System (INIS)

Cui Fengling; Wang Junli; Cui Yanrui; Li Jianping

2006-01-01

The interactions between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and serum albumin were investigated by fluorescence spectroscopy and UV absorption spectrum under physiological conditions. The results of spectroscopic measurements suggested that N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea should have a strong ability to quench the intrinsic fluorescence of both bovine serum albumin and human serum albumin through static quenching procedure, and the hydrophobic interaction was the predominant intermolecular force stabilizing the complex. Thermodynamic parameter enthalpy changes (ΔH) and entropy changes (ΔS) were calculated according to the Vant'Hoff equation. The binding distances between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and the proteins were evaluated on the basis of the theory of Foester energy transfer. In addition, the effects of other ions on the binding constants of complexes were also discussed. Synchronous fluorescence technology was successfully applied to the determination of serum albumins added to the CPNT solution

Fluorescent investigation of the interactions between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and serum albumin: Synchronous fluorescence determination of serum albumin

Energy Technology Data Exchange (ETDEWEB)

Cui Fengling [School of Chemistry and Environmental Science, Key Laboratory for Environmental Pollution Control Technology of Henan Province, Henan Normal University, Xinxiang, Hennan 453007 (China)]. E-mail: fenglingcui@hotmail.com; Wang Junli [School of Chemistry and Environmental Science, Key Laboratory for Environmental Pollution Control Technology of Henan Province, Henan Normal University, Xinxiang, Hennan 453007 (China); Cui Yanrui [School of Chemistry and Environmental Science, Key Laboratory for Environmental Pollution Control Technology of Henan Province, Henan Normal University, Xinxiang, Hennan 453007 (China); Li Jianping [School of Chemistry and Environmental Science, Key Laboratory for Environmental Pollution Control Technology of Henan Province, Henan Normal University, Xinxiang, Hennan 453007 (China)

2006-07-07

The interactions between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and serum albumin were investigated by fluorescence spectroscopy and UV absorption spectrum under physiological conditions. The results of spectroscopic measurements suggested that N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea should have a strong ability to quench the intrinsic fluorescence of both bovine serum albumin and human serum albumin through static quenching procedure, and the hydrophobic interaction was the predominant intermolecular force stabilizing the complex. Thermodynamic parameter enthalpy changes ({delta}H) and entropy changes ({delta}S) were calculated according to the Vant'Hoff equation. The binding distances between N-(p-chlorophenyl)-N'-(1-naphthyl) thiourea and the proteins were evaluated on the basis of the theory of Foester energy transfer. In addition, the effects of other ions on the binding constants of complexes were also discussed. Synchronous fluorescence technology was successfully applied to the determination of serum albumins added to the CPNT solution.

Cyclic α-Alkoxyphosphonium Salts from (2-(Diphenylphosphino)phenyl)methanol and Aldehydes and Their Application in Synthesis of Vinyl Ethers and Ketones via Wittig Olefination.

Science.gov (United States)

Huang, Wenhua; Rong, Hong-Ying; Xu, Jie

2015-07-02

Cyclic α-alkoxyphosphonium salts have been synthesized from (2-(diphenylphosphino)phenyl)methanol and aldehydes in 36-89% yields. These phosphonium salts are bench-stable solids and undergo Wittig olefination with aldehydes under basic conditions (K2CO3 or t-BuOK) to form benzylic vinyl ethers, which are readily hydrolyzed to 1,2-disubstituted ethanones under acidic conditions. The formation mechanism of these phosphonium salts via hemiacetal is also proposed.

Different molecular conformations co-exist in each of three 2-aryl-N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)acetamides: hydrogen bonding in zero, one and two dimensions.

Science.gov (United States)

Narayana, Badiadka; Yathirajan, Hemmige S; Rathore, Ravindranath S; Glidewell, Christopher

2016-09-01

4-Antipyrine [4-amino-1,5-dimethyl-2-phenyl-1H-pyrazol-3(2H)-one] and its derivatives exhibit a range of biological activities, including analgesic, antibacterial and anti-inflammatory, and new examples are always of potential interest and value. 2-(4-Chlorophenyl)-N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)acetamide, C19H18ClN3O2, (I), crystallizes with Z' = 2 in the space group P\\overline{1}, whereas its positional isomer 2-(2-chlorophenyl)-N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)acetamide, (II), crystallizes with Z' = 1 in the space group C2/c; the molecules of (II) are disordered over two sets of atomic sites having occupancies of 0.6020 (18) and 0.3980 (18). The two independent molecules of (I) adopt different molecular conformations, as do the two disorder components in (II), where the 2-chlorophenyl substituents adopt different orientations. The molecules of (I) are linked by a combination of N-H...O and C-H...O hydrogen bonds to form centrosymmetric four-molecule aggregates, while those of (II) are linked by the same types of hydrogen bonds forming sheets. The related compound N-(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)-2-(3-methoxyphenyl)acetamide, C20H21N3O3, (III), is isomorphous with (I) but not strictly isostructural; again the two independent molecules adopt different molecular conformations, and the molecules are linked by N-H...O and C-H...O hydrogen bonds to form ribbons. Comparisons are made with some related structures, indicating that a hydrogen-bonded R2(2)(10) ring is the common structural motif.

Carcinogenicity of 1-methyl-3(p-chlorophenyl)-1-nitrosourea and its 1-methyl trideuterated derivative in rats.

Science.gov (United States)

Schreiber, D; Martin, J; Mendel, J

1986-01-01

The carcinogenic activity of 1-methyl-3(p-chlorophenyl)-1-nitrosourea (Cl-MPNU) and its 1-methyl trideuterated analog (Cl-MPNU-d3) was compared by intragastric administration to hooded rats of equimolar doses of both compounds. A 100% frequency of forestomach tumors was observed in both groups. However, the mean latency period of the animals treated with Cl-MPNU-d3 was significantly longer (P less than 0.01). The results suggest the occurrence of a deuterium isotope effect in nitrosoureas but not as distinct as in nitrosamines.

Bis[μ-1,3-bis(diphenylphosphanylpropane-κ2P:P′]digold(I tetrachloridonickelate(II diethyl ether monosolvate

Directory of Open Access Journals (Sweden)

Asako Igashira-Kamiyama

2013-06-01

Full Text Available The title compound, [Au2(C27H26P22][NiCl4]·C4H10O, consists of a digold(I complex cation, an [NiCl4]2− complex anion and a diethyl ether solvent molecule. Two 1,3-bis(diphenylphosphanylpropane (dppp ligands bridge two AuI atoms, forming a metallacycle in which each of the AuI atoms is coordinated in a slightly distorted linear environment by two P atoms. In the complex anion, the NiII atom is coordinated by four chloride ligands in a distorted tetrahedral geometry. The complex cation and the complex anion form a cation–anion pair through two Au...Cl contacts of 3.040 (1 and 3.021 (2 Å. One of the phenyl groups of the dppp ligand is disordered over two positions with equal occupancies.

The radiation chemistry of poly(arylene ether phosphine oxide)s

International Nuclear Information System (INIS)

Hill, D.J.T.; Hopewell, J.L.; O'Donnell, J.H.; Pomery, P.J.

1995-01-01

Electron spin resonance spectroscopy has been used to study the radicals which are formed on the gamma radiolysis of selected poly(arylene ether phosphene oxide)s which have been irradiated either at 77 or 303 K. At 77 K both neutral and anionic radicals are formed, but the anionic radicals are unstable above 200 K. Two types of neutral radicals were observed. They were the phenyl and phenoxyl radicals formed by homolytic scission of the backbone ether bonds. 31 P NMR spectroscopy showed that no new structures involving phosphorus were formed, but there was an indication that crosslinking may take place at aromatic rings adjacent to phosphorus atoms. Solution viscosity measurements indicated that the polymers undergo nett chain scission on irradiation, but the nett scission yield is very small. (author)

Analytical recovery of Cr (VI), Mo (VI), Ti (IV) and Co (II) by N-phenyl-meta-nitro-benzohydroxamic and N-P-tolyl-meta-nitro-benzohydroxamic acids

International Nuclear Information System (INIS)

Ahmed, Abdul Aziz Malik Mohamed

2000-05-01

Two hydroxamic acids were prepared; N-phenyl-m-nitro-benzohydroxamic and N-p-tolyl-m-nitro-benzo hydroxamic acids. N-phenyl-m-nitro-benzohydroxamic was prepared by coupling the β-phenyl hydroxylamine with m-nitro-benzoyl chloride in ratio 1:1 in alkaline medium at zero degree centigrade. It recrystallized from a mixture of benzene and petroleum ether (2:1) with the yield of 67%. The product was characterized by: A-nitrogen content which was found to be 10.7% (lit. 10.9%). B-infra-red spectroscopy. C-the molecular weight which was determined by titration, was found to be 257.7 gram (lit. 257 gram). D-the molecular weight which was determined by elevation of the boiling point, was found to be 253.7 gram (lit. 257 gram). E-characteristic violet color reaction with vanadium and blood-red reaction with ferric chloride solutions. F-melting point 117 degree centigrade. N-p-tolyl-m-nitro benzo hydroxamic acid was prepared by coupling the p-tolyl-hydroxylamine with m-nitro benzoyl chloride using the same procedure. It was recrystallized from a mixture of benzene and petroleum ether (2:1) with the yield of 63%. The product was characterized by: A-nitrogen content which was found to be 10.1% (lit. 10.3). B-infra-red spectroscopy. C-the molecular weight which was determined by titration, was found to be 271.6 gram (lit. 272). D-the molecular weight which was determined by elevation of the boiling point, was found to be 269.9 gram (lit. 272 gram). E.characteristic violet color reaction with vanadium and blood-red color with ferric chloride solutions. F-melting point which was found to be 105 degree centigrade (lit. 106 degree c). the two hydroxamic acids were used as analytical reagents for extraction of metal ions Ti (IV), Cr (VI), Mo (VI) and Co (II). With an equal volume of the organic and aqueous phase, and only one extraction, N-phenyl-m-nitro-benzohydroxamic acid was found to have a maximum extraction of 30.18% for Ti (IV) at pH 2.0, of 97.06% for Cr (VI) at 3MH 2 SO 4

UV-A photooxidation of β-carotene in Triton X-100 micelles by nitrodiphenyl ether herbicides

International Nuclear Information System (INIS)

Orr, G.L.; Hogan, M.E.

1985-01-01

Photooxidation of β-carotene in Triton X-100 micelles was stimulated by lipophilic nitrodiphenyl ether herbicides at concentrations as low as 5 μM after 15 min in UV radiation (UV-A between 315 and 400 nm). Bleaching of β-carotene by acifluorfen-methyl [methyl 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate] was proportional to UV-A intensity and independent of pH. White light (400-700 nm) alone was without effect. At pH 6.5, 100 μM acifluorfen [sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate], a water-soluble nitrodiphenyl ether, stimulated photooxidation of β-carotene after 15 min in UV-A radiation. Activity of 200 μM acifluorfen was enhanced at pHs between 3.5 and 6.5. The chlorodiphenyl ether analogue of acifluorfen-methyl, methyl 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-chlorobenzoate, exhibited little activity at 200 μM and 200 μM phenyl ether was without effect. Activation energy for acifluorfen-methyl stimulated β-carotene photooxidation near 20 and 30 0 C was 40.3 and 5.6 kJ mol -1 , respectively. Subsequent to UV-A exposure and placement into darkness no further bleaching of β-carotene was detected, indicating that reactive species were generated only in light and consumed quickly in darkness

Synthesis of a new scintillator 2-phenyl-5(4-p-terphenylyl)Oxazole

International Nuclear Information System (INIS)

Dhane, D.L.; Gaiki, G.M.

1979-01-01

Friedel-Crafts reaction between hippuryl chloride and p-terphenyl gave benzoylaminomethyl-(4-p-terphenylyl) ketone (II) which on cyclodehydration gave hitherto unreported 2-phenyl-5-(4-p-terphenylyl) oxazole (I). IR, UV absorption and fluorescence spectra of I have been recorded. The performance of I as a scintillator solute has been tested. (auth.)

Research on the differences between 2-(2-Chlorophenyl)benzimidazole and 2-(4-Chlorophenyl)benzimidazole based on terahertz time domain spectroscopy

Science.gov (United States)

Song, Maojiang; Yang, Fei; Liu, Liping; Shen, Li; Hu, Pengfei; Zhang, Li; Su, Caixia

2018-05-01

Due to wide variety of biological and pharmacological activities of benzimidazole derivatives, the differences between 2-(2-Chlorophenyl)benzimidazole and 2-(4-Chlorophenyl) benzimidazole were researched by employing terahertz time-domain spectroscopy and density functional theory systematically. Although the only difference between their molecular configurations is the arrangement of chlorine atom on chlorophenyl ring, there are distinctive differences in their fingerprint spectra in the range of 0.2-2.5 THz, such as amount, amplitude, and frequency position of absorption peaks. The validity of these results was confirmed by the theoretical results simulated by using density functional theory. The possible reasons of these differences originate from the different van der Waals forces and the different dihedral angles of the molecules within crystal cell. These results indicate the importance of this spectral range as a conformational fingerprint region where even minor changes in the molecular configuration lead to major differences in its THz absorption.

Esterification of phenyl acetic acid with p-cresol using metal cation exchanged montmorillonite nanoclay catalysts.

Science.gov (United States)

Bhaskar, M; Surekha, M; Suma, N

2018-02-01

The liquid phase esterification of phenyl acetic acid with p -cresol over different metal cation exchanged montmorillonite nanoclays yields p -cresyl phenyl acetate. Different metal cation exchanged montmorillonite nanoclays (M n +  = Al 3+ , Zn 2+ , Mn 2+ , Fe 3+ , Cu 2+ ) were prepared and the catalytic activity was studied. The esterification reaction was conducted by varying molar ratio of the reactants, reaction time and catalyst amount on the yield of the ester. Among the different metal cation exchanged catalysts used, Al 3+ -montmorillonite nanoclay was found to be more active. The characterization of the material used was studied under different techniques, namely X-ray diffraction, scanning electron microscopy and thermogravimetric analysis. The product obtained, p -cresyl phenyl acetate, was identified by thin-layer chromotography and confirmed by Fourier transform infrared, 1 H NMR and 13 C NMR. The regeneration activity of used catalyst was also investigated up to fourth generation.

(2E-1-(3-Chlorophenyl-3-(4-chlorophenylprop-2-en-1-one

Directory of Open Access Journals (Sweden)

Jerry P. Jasinski

2009-11-01

Full Text Available The title compound, C15H10Cl2O, is a chalcone with 3-chlorophenyl and 4-chlorophenyl substituents bonded at the opposite ends of a propenone group, the biologically active region. The dihedral angle between mean planes of these two chloro-substituted benzene rings is 46.7 (7° compared to 46.0 (1 and 32.4 (1° in similar published sructures. The angles between the mean plane of the prop-2-en-1-one group and the mean planes of the 3-chlorophenyl and 4-chlorophenyl rings are 24.1 (2 and 29.63°, respectively. While no classical hydrogen bonds are present, weak intermolecular C—H...π-ring interactions are observed, which contribute to the stability of crystal packing.

Thermal and Dielectric Behavior Studies of Poly(Arylene Ether Sulfones with Sulfonated and Phosphonated Pendants

Directory of Open Access Journals (Sweden)

Shimoga D. Ganesh

2016-01-01

Full Text Available The present paper discusses the aspects of the synthesizing valeric acid based poly(ether sulfones with active carboxylic acid pendants (VALPSU from solution polymerization technique via nucleophilic displacement polycondensation reaction among 4,4′-dichlorodiphenyl sulfone (DCDPS and 4,4′-bis(4-hydroxyphenyl valeric acid (BHPA. The conditions necessary to synthesize and purify the polymer were investigated in some detail. The synthesized poly(ether sulfones comprise sulfone and ether linkages in addition to reactive carboxylic acid functionality; these active carboxylic acid functional groups were exploited to hold the phenyl sulphonic acid and phenyl phosphonic acid pendants. The phenyl sulphonic acid pendants in VALPSU were easily constructed by altering active carboxylic acid moieties by sulfanilic acid using N,N′-dicyclohexylcarbodiimide (DCC mediated mild synthetic route, whereas the latter one was built in two steps. Initially, polyphosphoric acid condensation with VALPSU by 4-bromoaniline and next straightforward palladium catalyzed synthetic route, in both of which acidic pendants are clenched by polymer backbone via amide linkage. Without impairing the primary polymeric backbone modified polymers were prepared by varying the stoichiometric ratios of respective combinations. All the polymers were physicochemically characterized and pressed into tablets; electrical contacts were established to study the dielectric properties. Finally, the influence of the acidic pendants on the dielectric properties was examined.

Synthesis of formazans from Mannich base of 5-(4-chlorophenyl amino-2-mercapto-1,3,4-thiadiazole as antimicrobial agents

Directory of Open Access Journals (Sweden)

Pramilla Sah

2014-04-01

Full Text Available 5-(4-Chlorophenyl amino-2-mercapto-1,3,4-thiadiazole (I was refluxed with formaldehyde and ammonium chloride in ethanol yielding the Mannich base 5-(4-chloro phenyl amino-3-aminomethyl-2-mercapto-1,3,4-thiadiazole (II. Esterification with 4-chloro-(2,6-dinitro phenoxy-ethyl acetate (III under anhydrous conditions gave the intermediate (IV. Subsequent hydrazinolysis with hydrazine hydrate gave the corresponding hydrazide 3-amino methyl-5-(4-chloro phenyl amino-2-mercapto-4′-(2′,6′-dinitro phenoxy-acetyl hydrazide (V. The hydrazide was converted into the Schiff bases (VIa–b by reacting with 2-chlorobenzaldehyde and 3-methoxy-4-hydroxy benzaldehyde in presence of methanol containing 2–3 drops of acetic acid. Diazotisation with aromatic amines, sulphanilic acid and sulphur drugs gave the formazans (VIIa–g respectively. Chemical structures have been established by elemental analysis and the spectral techniques of FTIR, 1H NMR and mass. Antimicrobial activity (in vitro was evaluated against the two pathogenic bacterial strains. Escherichia coli and Salmonella typhi, three fungal strains Aspergillus niger, Penicillium species and Candida albicans. The compounds have shown moderate activity.

Pulse radiolysis study on free radical scavenger edaravone (3-methyl-1-phenyl-2-pyrazolin-5-one). 2: A comparative study on edaravone derivatives

International Nuclear Information System (INIS)

Hata, Kuniki; Katsumura, Yosuke; Lin, M.; Yamashita, Shinichi; Muroya, Yusa; Fu Haiying; Nakagawa, Hidehiko

2011-01-01

A comparative study using the pulse radiolysis technique was carried out to investigate transient absorption spectra and rate constants for the reactions of OH radical and N 3 radical with edaravone (3-methyl-1-phenyl-2-pyrazolin-5-one) and its four analogue compounds, 1,3-dimethyl-2-pyrazolin-5-one, 3-methyl-1-(pyridin-2-yl)-2-pyrazolin-5-one, 1-phenyl-3-trifluoromethyl-2-pyrazolin-5-one and 1-(4-chlorophenyl)-3-methyl-2-pyrazolin-5-one. The results showed that, unlike reaction mechanisms previously proposed, the phenyl group of edaravone played an important role in the reaction with OH radical and OH adducts to the phenyl group were formed. Quantum chemical calculations also strongly supported this attribution and suggested that the most favorable site for attacks by OH radical is the ortho position of the phenyl group. Moreover, the rate constants for the reactions of edaravone and its analogues towards OH radical and N 3 radical were about 8.0 x 10 9 , and 4.0 x 10 9 dm 3 mol -1 s -1 , respectively. Edaravone displayed higher reactivity compared to the others, in contrast to a previous report in which 3-methyl-1-(pyridin-2-yl)-2-pyrazolin-5-one showed the highest reactivity towards Hydroxyl radical OH. (author)

NIOSH Manual of Analytical Methods (third edition). Fourth supplement

Energy Technology Data Exchange (ETDEWEB)

1990-08-15

The NIOSH Manual of Analytical Methods, 3rd edition, was updated for the following chemicals: allyl-glycidyl-ether, 2-aminopyridine, aspartame, bromine, chlorine, n-butylamine, n-butyl-glycidyl-ether, carbon-dioxide, carbon-monoxide, chlorinated-camphene, chloroacetaldehyde, p-chlorophenol, crotonaldehyde, 1,1-dimethylhydrazine, dinitro-o-cresol, ethyl-acetate, ethyl-formate, ethylenimine, sodium-fluoride, hydrogen-fluoride, cryolite, sodium-hexafluoroaluminate, formic-acid, hexachlorobutadiene, hydrogen-cyanide, hydrogen-sulfide, isopropyl-acetate, isopropyl-ether, isopropyl-glycidyl-ether, lead, lead-oxide, maleic-anhydride, methyl-acetate, methyl-acrylate, methyl-tert-butyl ether, methyl-cellosolve-acetate, methylcyclohexanol, 4,4'-methylenedianiline, monomethylaniline, monomethylhydrazine, nitric-oxide, p-nitroaniline, phenyl-ether, phenyl-ether-biphenyl mixture, phenyl-glycidyl-ether, phenylhydrazine, phosphine, ronnel, sulfuryl-fluoride, talc, tributyl-phosphate, 1,1,2-trichloro-1,2,2-trifluoroethane, trimellitic-anhydride, triorthocresyl-phosphate, triphenyl-phosphate, and vinyl-acetate.

Pulse radiolysis study on free radical scavenger edaravone (3-methyl-1-phenyl-2-pyrazolin-5-one). 2: A comparative study on edaravone derivatives

Energy Technology Data Exchange (ETDEWEB)

Hata, Kuniki; Katsumura, Yosuke [Tokyo Univ., School of Engineering, Tokyo (Japan); Lin, M; Yamashita, Shinichi [Japan Atomic Energy Agency, Advanced Science Research Center, Tokai, Ibaraki (Japan); Muroya, Yusa [Tokyo Univ., Nuclear Professional School, Tokai, Ibaraki (Japan); Haiying, Fu [Chinese Academy of Sciences, Shanghai (China); Nakagawa, Hidehiko [Nagoya City Univ., Graduate School of Pharmaceutical Sciences, Nagoya, Aichi (Japan)

2011-01-15

A comparative study using the pulse radiolysis technique was carried out to investigate transient absorption spectra and rate constants for the reactions of OH radical and N{sub 3} radical with edaravone (3-methyl-1-phenyl-2-pyrazolin-5-one) and its four analogue compounds, 1,3-dimethyl-2-pyrazolin-5-one, 3-methyl-1-(pyridin-2-yl)-2-pyrazolin-5-one, 1-phenyl-3-trifluoromethyl-2-pyrazolin-5-one and 1-(4-chlorophenyl)-3-methyl-2-pyrazolin-5-one. The results showed that, unlike reaction mechanisms previously proposed, the phenyl group of edaravone played an important role in the reaction with OH radical and OH adducts to the phenyl group were formed. Quantum chemical calculations also strongly supported this attribution and suggested that the most favorable site for attacks by OH radical is the ortho position of the phenyl group. Moreover, the rate constants for the reactions of edaravone and its analogues towards OH radical and N{sub 3} radical were about 8.0 x 10{sup 9}, and 4.0 x 10{sup 9} dm{sup 3} mol{sup -1} s{sup -1}, respectively. Edaravone displayed higher reactivity compared to the others, in contrast to a previous report in which 3-methyl-1-(pyridin-2-yl)-2-pyrazolin-5-one showed the highest reactivity towards Hydroxyl radical OH. (author)

Evidence for Dual Binding Sites for 1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) in Insect Sodium Channels*

Science.gov (United States)

Du, Yuzhe; Nomura, Yoshiko; Zhorov, Boris S.; Dong, Ke

2016-01-01

1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (DDT), the first organochlorine insecticide, and pyrethroid insecticides are sodium channel agonists. Although the use of DDT is banned in most of the world due to its detrimental impact on the ecosystem, indoor residual spraying of DDT is still recommended for malaria control in Africa. Development of resistance to DDT and pyrethroids is a serious global obstacle for managing disease vectors. Mapping DDT binding sites is necessary for understanding mechanisms of resistance and modulation of sodium channels by structurally different ligands. The pioneering model of the housefly sodium channel visualized the first receptor for pyrethroids, PyR1, in the II/III domain interface and suggested that DDT binds within PyR1. Previously, we proposed the second pyrethroid receptor, PyR2, at the I/II domain interface. However, whether DDT binds to both pyrethroid receptor sites remains unknown. Here, using computational docking of DDT into the Kv1.2-based mosquito sodium channel model, we predict that two DDT molecules can bind simultaneously within PyR1 and PyR2. The bulky trichloromethyl group of each DDT molecule fits snugly between four helices in the bent domain interface, whereas two p-chlorophenyl rings extend into two wings of the interface. Model-driven mutagenesis and electrophysiological analysis confirmed these propositions and revealed 10 previously unknown DDT-sensing residues within PyR1 and PyR2. Our study proposes a dual DDT-receptor model and provides a structural background for rational development of new insecticides. PMID:26637352

Halogenated methyl-phenyl ethers (anisoles) in the environment: determination of vapor pressures, aqueous solubilities, Henry's law constants, and gas/water- (Kgw), n-octanol/water- (Kow) and gas/n-octanol (Kgo) partition coefficients.

Science.gov (United States)

Pfeifer, O; Lohmann, U; Ballschmiter, K

2001-11-01

Halogenated methyl-phenyl ethers (methoxybenzenes, anisoles) are ubiquitous organics in the environment although they are not produced in industrial quantities. Modelling the fate of organic pollutants such as halogenated anisoles requires a knowledge of the fundamental physico-chemical properties of these compounds. The isomer-specific separation and detection of 60 of the 134 possible congeners allowing an environmental fingerprinting are reported in this study. The vapor pressure p0(L) of more than 60 and further physico-chemical properties of 26 available congeners are given. Vapor pressures p0(L), water solubilities S(L)W, and n-octanol/water partition coefficients Kow were determined by capillary HR-GC (High Resolution Gas Chromatography) on a non-polar phase and by RP-HPLC (Reversed Phase High Performance Liquid Chromatography) on a C18 phase with chlorobenzenes as reference standards. From these experimental data the Henry's law constants H, and the gas/water Kgw and gas/n-octanol Kgo partition coefficients were calculated. We found that vapor pressures, water solubilities, and n-octanol/water partition coefficients of the halogenated anisoles are close to those of the chlorobenzenes. A similar environmental fate of both groups can, therefore, be predicted.

Preconception serum 1,1,1-trichloro-2,2,bis(p-chlorophenyl)ethane and B-vitamin status: independent and joint effects on women's reproductive outcomes.

Science.gov (United States)

Ouyang, Fengxiu; Longnecker, Matthew P; Venners, Scott A; Johnson, Sara; Korrick, Susan; Zhang, Jun; Xu, Xiping; Christian, Parul; Wang, Mei-Cheng; Wang, Xiaobin

2014-12-01

Although preconception 1,1,1-trichloro-2,2,bis(p-chlorophenyl)ethane (DDT) exposure and B-vitamin deficiencies have each been shown to negatively affect human reproductive outcomes, little is known about their joint effect. We sought to examine whether B-vitamin sufficiency protects against adverse effects of DDT on clinical pregnancy (CP) and subclinical early pregnancy loss (EPL). We measured preconception concentrations of plasma B vitamins (vitamin B-6, vitamin B-12, and folate) and serum total DDT [sum of p,p' and o,p' isomers of DDT and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene] in 291 nulligravid women from Anhui, China, who were studied in 1996-1998. The women were followed prospectively from the time they stopped contraception until CP (gestational age ≥42 d) or 12 mo (whichever occurred first). EPL was identified by using daily urinary human chorionic gonadotropin. The women were categorized according to B-vitamin status (deficiency compared with sufficiency) and DDT concentration (high compared with low). Of 291 study women, a total of 385 conceptions (31% of which ended in EPL) and 265 CPs occurred. Compared with women with adequate B-vitamins and low DDT, incidence rates of CP were reduced in women with B-vitamin deficiency and a high DDT concentration (P vitamin B-12, DDT was not associated with the incidence of CP; in contrast, in women with vitamin B-12 deficiency, high DDT was associated with a lower incidence of CP (HR: 0.44; 95% CI: 0.23, 0.84); and the test for interaction was significant (P vitamin B-12 and folate sufficiency may help protect against adverse reproductive effects of DDT exposure. Additional studies are needed to confirm our findings. © 2014 American Society for Nutrition.

Evidence for Dual Binding Sites for 1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) in Insect Sodium Channels.

Science.gov (United States)

Du, Yuzhe; Nomura, Yoshiko; Zhorov, Boris S; Dong, Ke

2016-02-26

1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (DDT), the first organochlorine insecticide, and pyrethroid insecticides are sodium channel agonists. Although the use of DDT is banned in most of the world due to its detrimental impact on the ecosystem, indoor residual spraying of DDT is still recommended for malaria control in Africa. Development of resistance to DDT and pyrethroids is a serious global obstacle for managing disease vectors. Mapping DDT binding sites is necessary for understanding mechanisms of resistance and modulation of sodium channels by structurally different ligands. The pioneering model of the housefly sodium channel visualized the first receptor for pyrethroids, PyR1, in the II/III domain interface and suggested that DDT binds within PyR1. Previously, we proposed the second pyrethroid receptor, PyR2, at the I/II domain interface. However, whether DDT binds to both pyrethroid receptor sites remains unknown. Here, using computational docking of DDT into the Kv1.2-based mosquito sodium channel model, we predict that two DDT molecules can bind simultaneously within PyR1 and PyR2. The bulky trichloromethyl group of each DDT molecule fits snugly between four helices in the bent domain interface, whereas two p-chlorophenyl rings extend into two wings of the interface. Model-driven mutagenesis and electrophysiological analysis confirmed these propositions and revealed 10 previously unknown DDT-sensing residues within PyR1 and PyR2. Our study proposes a dual DDT-receptor model and provides a structural background for rational development of new insecticides. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

Effects of perinatal combined exposure to 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p'-DDE) and tributyltin (TBT) on rat female reproductive system.

Science.gov (United States)

Makita, Yuji

2008-05-01

1,1-Dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p'-DDE) is the most prevalent metabolite of DDT used as a pesticide before and tributyltin (TBT) compounds are used primarily as antifouling agents on vessels, ships, and aqua culture facilities, as they exert biocidal actions. Currently, p,p'-DDE and TBT are ubiquitously distributed in the environment and bio-accumulated in marine products, especially fish or shellfish. Thus, oral p,p'-DDE and TBT intake through marine products is demonstrated to be rather high in Japan. Consequently, the fetus and neonate will be exposed to p,p'-DDE and TBT via mother. Therefore, effects of perinatal combined exposure to p,p'-DDE and TBT on the female reproductive system after maturation have been investigated in rat female offspring of dams ingesting 125ppm p,p'-DDE (approximately 10mg/kg) and 25ppm TBT (approximately 2mg/kg) during the perinatal period from gestation to lactation. In the present study, no deleterious reproductive outcomes were recognized in p,p'-DDE and/or TBT-treated dams. In contrast, growth retardation had developed in rat female offspring following perinatal exposure to TBT and sustained even after cessation of exposures. Further, reduced ovarian weights with elevated serum follicle-stimulating hormone (FSH) concentrations were observed in the reproductive system of matured female offspring following perinatal exposure to TBT. At present, biological relevance of these alterations remains unknown, but there is a possibility that these alterations lead to reproductive malfunctions in matured female offspring. Copyright © 2007 Elsevier B.V. All rights reserved.

Antibacterial activity of berberine-NorA pump inhibitor hybrids with a methylene ether linking group.

Science.gov (United States)

Samosorn, Siritron; Tanwirat, Bongkot; Muhamad, Nussara; Casadei, Gabriele; Tomkiewicz, Danuta; Lewis, Kim; Suksamrarn, Apichart; Prammananan, Therdsak; Gornall, Karina C; Beck, Jennifer L; Bremner, John B

2009-06-01

Conjugation of the NorA substrate berberine and the NorA inhibitor 5-nitro-2-phenyl-1H-indole via a methylene ether linking group gave the 13-substituted berberine-NorA inhibitor hybrid, 3. A series of simpler arylmethyl ether hybrid structures were also synthesized. The hybrid 3 showed excellent antibacterial activity (MIC Staphylococcus aureus, 1.7 microM), which was over 382-fold more active than the parent antibacterial berberine, against this bacterium. This compound was also shown to block the NorA efflux pump in S. aureus.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-l-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in m-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature,thermal degradation temperature and WAXD.

Transformation of 2,2′,4,4′-tetrabromodiphenyl ether under UV irradiation: Potential sources of the secondary pollutants

International Nuclear Information System (INIS)

Wang, Ji-Zhong; Hou, Yuqing; Zhang, Jianshun; Zhu, Jiping; Feng, Yong-Lai

2013-01-01

Highlights: • 2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47) was found transformed to six less brominated BDE analogs under UV irradiation. • BDE-47 was found degraded faster in liquid phase than in gas phase. • Two brominated phenols were formed in the transformation of BDE-47 in gas phase. • The bromine on the ortho positions of the phenyl rings was found lost first to form 2,4,4′-tribromodiphenyl ether (BDE-28). • The more volatile less brominated BDEs are a source of secondary pollutants in the environment. -- Abstract: A commercial brominated flame retardant 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) was used as the model chemical to investigate the degradation and transformation of polybrominated diphenyl ethers (PBDEs) in gas and liquid phases, respectively, under ultraviolet (UV) irradiation. The results showed that BDE-47 can be transformed to less-brominated BDE analogs. A total of six compounds that are less-brominated BDEs and two brominated phenols were observed as transformation products in the reaction mixtures. Different degradation rates of BDE-47 in n-nonane and in isooctane in the same chamber system were observed. Degradation rate of BDE-47 in n-nonane was faster than in isooctane. Under UV irradiation, the bromine on the ortho positions of the phenyl rings was lost first to form 2,4,4′-tribromodiphenyl ether (BDE-28), which then progressively lead to 4,4′-dibromodiphenyl ether (BDE-15) or 2,4′-dibromodiphenyl ether (BDE-8). An airborne transformation pathway has been proposed according to observed transformation products. The more volatile less-brominated BDEs from transformation of BDE-47 are easily evaporated into air to be a source of secondary pollutants in the environment

N-(2-Chlorophenyl-2-({5-[4-(methylsulfanylbenzyl]-4-phenyl-4H-1,2,4-triazol-3-yl}sulfanylacetamide

Directory of Open Access Journals (Sweden)

Hoong-Kun Fun

2011-08-01

Full Text Available In the title molecule, C24H21ClN4OS2, the central 1,2,4-triazole ring forms dihedral angles of 89.05 (9, 86.66 (9 and 82.70 (10° with the chloro-substituted benzene ring, the methylsulfanyl-substituted benzene ring and the phenyl ring, respectively. In the crystal, molecules are linked into sheets parallel to (100 by intermolecular N—H...N and weak C—H...O hydrogen bonds.

Different aspects of S-carvone, a natural potato sprout growth inhibitor

NARCIS (Netherlands)

Oosterhaven, J.

1995-01-01

<p>After harvest, potato tubers are usually stored at a temperature of 6-8°C in combination with the application of a synthetic sprout inhibitor. Frequently used sprout inhibitors are isopropyl N-phenyl-carbamate (propham or IPC), isopropyl N-(3-chlorophenyl)carbamate (chlorpropham or CIPC) or

Supramolecular features of 2-(chlorophenyl)-3-[(chlorobenzylidene)-amino]-2,3-dihydroquinazolin-4(1H)-ones: A combined experimental and computational study

Science.gov (United States)

Mandal, Arkalekha; Patel, Bhisma K.

2018-03-01

The molecular structures of two isomeric 2-(chlorophenyl)-3-[(chlorobenzylidene)-amino] substituted 2,3-dihydroquinazolin-4(1H)-ones have been determined via single crystal XRD. Both isomers contain chloro substitutions on each of the phenyl rings and as a result a broad spectrum of halogen mediated weak interactions are viable in their crystal structures. The crystal packing of these compounds is stabilized by strong N-H⋯O hydrogen bond and various weak, non-classical hydrogen bonds acting synergistically. Both the molecules contain a chiral center and the weak interactions observed in them are either chiral self-discriminatory or chiral self-recognizing in nature. The weak interactions and spectral features of the compounds have been studied through experimental as well as computational methods including DFT, MEP, NBO and Hiresfeld surface analyses. In addition, the effect of different weak interactions to dictate either chiral self-recognition or self-discrimination in crystal packing has been elucidated.

Electrochemical surface derivation of glassy carbon by the reduction of triaryl- and alkyldiphenylsulfonium salts

DEFF Research Database (Denmark)

Vase, K.H.; Holm, A.H.; Norrman, Kion

2008-01-01

, whereas (4-chlorophenyl)diphenylsulfonium salt leads to a mixture of phenyl and chlorophenyl groups). These relationships may be understood by considering the inductive nature of the substituent with regard to the aryl-S bonds and are supported by preparative experiments. Upon reduction...

1,3-Dibenzyl-2-(2-chlorophenyl-4-methylimidazolidine

Directory of Open Access Journals (Sweden)

Augusto Rivera

2012-12-01

Full Text Available In the title compound, C24H25ClN2, the methine, methylene and methyl C atoms of the methyl-substituted imidazolidine ring are disordered over two sets of sites with a refined occupancy ratio of 0.834 (4:0.166 (4. Each disordered ring assumes an envelope conformation with an N atom as the flap. The pendant benzyl rings are oriented equatorially with respect to the imidazolidine ring. The chlorophenyl ring is inclined to the mean plane of the four planar atoms of the major component of the imidazolidine ring by 76.27 (12°. The dihedral angles between the chlorophenyl ring and the two benzyl rings are 55.31 (9 and 57.50 (8°; the dihedral angle between these latter rings is 71.59 (9°. In the crystal, molecules are linked by C—H...Cl interactions and a number of weak C—H...π interactions, involving all three aromatic rings, forming a three-dimensional structure.

Electrochemical characterization of azo dye (E)-1-(4-((4-(phenylamino)phenyl)diazenyl)phenyl)ethanone (DPA)

International Nuclear Information System (INIS)

Surucu, Ozge; Abaci, Serdar; Seferoğlu, Zeynel

2016-01-01

Highlights: • Electrochemical characterization of azo dye DPA was performed. • Pencil graphite electrode was used as working electrode. • Cyclic voltammetry was used to determine the effect of scan rate and pH. • Chronoamperometry was used to determine diffusion constant. • Square wave voltammetry verified the results of cyclic voltammetry. - Abstract: An enormous range of possible dyes are available, especially as the starting molecules are readily available and cheap. As other dye classes become less viable from either an environmental or economic reasons, azo dyes come to the forefront. Therefore, electrochemical characterization of a novel synthesized azo dye (E)-1-(4-((4-(phenylamino) phenyl)diazenyl)phenyl)ethanone was achieved for the first time. Cyclic voltammetry, chronoamperometry and square wave voltammetry techniques were used to investigate the electrochemical behavior and electrocatalytic effect of azo dye (E)-1-(4-((4-(phenylamino) phenyl)diazenyl)phenyl)ethanone at pencil graphite electrode. Cyclic voltammograms were utilized to determine the effect of scan rate and pH on the peak current and peak potential. Chronoamperometry technique was used to determine diffusion constant, D and the type of adsorption isotherms. The kinetics parameters which were the apparent electron transfer rate constant, k s and charge transfer coefficient, α were calculated. Square wave voltammetry was used to verify responses of cyclic voltammetry technique.

Pharmacological Studies of p, N-(3, 4-Methylenedioxy phenyl Benzoic Acid (RRL-1364 - Part-I

Directory of Open Access Journals (Sweden)

Dahanukar Sharadini

1978-01-01

Full Text Available Detailed pharmacological investigations of p-N-(3, 4-methylene dioxy phenyl benzoic acid revealed marked hypotensive action which was dose dependent and most marked in cats; it was absent in rats. Atropine could block this hypotensive action, thus suggest-ing cholinomimetic mechanism. Further studies indicated that the hypotension produced was central and possibly medullary in origin.

Decrease of intracellular pH as possible mechanism of embryotoxicity of glycol ether alkoxyacetic acid metabolites

International Nuclear Information System (INIS)

Louisse, Jochem; Bai Yanqing; Verwei, Miriam; Sandt, Johannes J.M. van de; Blaauboer, Bas J.; Rietjens, Ivonne M.C.M.

2010-01-01

Embryotoxicity of glycol ethers is caused by their alkoxyacetic acid metabolites, but the mechanism underlying the embryotoxicity of these acid metabolites is so far not known. The present study investigates a possible mechanism underlying the embryotoxicity of glycol ether alkoxyacetic acid metabolites using the methoxyacetic acid (MAA) metabolite of ethylene glycol monomethyl ether as the model compound. The results obtained demonstrate an MAA-induced decrease of the intracellular pH (pH i ) of embryonic BALB/c-3T3 cells as well as of embryonic stem (ES)-D3 cells, at concentrations that affect ES-D3 cell differentiation. These results suggest a mechanism for MAA-mediated embryotoxicity similar to the mechanism of embryotoxicity of the drugs valproic acid and acetazolamide (ACZ), known to decrease the pH i in vivo, and therefore used as positive controls. The embryotoxic alkoxyacetic acid metabolites ethoxyacetic acid, butoxyacetic acid and phenoxyacetic acid also caused an intracellular acidification of BALB/c-3T3 cells at concentrations that are known to inhibit ES-D3 cell differentiation. Two other embryotoxic compounds, all-trans-retinoic acid and 5-fluorouracil, did not decrease the pH i of embryonic cells at concentrations that affect ES-D3 cell differentiation, pointing at a different mechanism of embryotoxicity of these compounds. MAA and ACZ induced a concentration-dependent inhibition of ES-D3 cell differentiation, which was enhanced by amiloride, an inhibitor of the Na + /H + -antiporter, corroborating an important role of the pH i in the embryotoxic mechanism of both compounds. Together, the results presented indicate that a decrease of the pH i may be the mechanism of embryotoxicity of the alkoxyacetic acid metabolites of the glycol ethers.

Critical properties of some aliphatic symmetrical ethers

International Nuclear Information System (INIS)

Nikitin, Eugene D.; Popov, Alexander P.; Bogatishcheva, Nataliya S.

2014-01-01

Highlights: • Critical properties of simple aliphatic ethers were measured. • The ethers decompose at near-critical temperatures. • Pulse-heating method with short residence times was used. -- Abstract: The critical temperatures T c and the critical pressures p c of dihexyl, dioctyl, and didecyl ethers have been measured. According to the measurements, the coordinates of the critical points are T c = (665 ± 7) K, p c = (1.44 ± 0.04) MPa for dihexyl ether, T c = (723 ± 7) K, p c = (1.19 ± 0.04) MPa for dioctyl ether, and T c = (768 ± 8) K, p c = (1.03 ± 0.03) MPa for didecyl ether. All the ethers studied degrade chemically at near-critical temperatures. A pulse-heating method applicable to measuring the critical properties of thermally unstable compounds has been used. The times from the beginning of a heating pulse to the moment of reaching the critical temperature were from 0.06 to 0.46 ms. The short residence times provide little decomposition of the substances in the course of the experiments. The critical properties of the ethers investigated in this work have been discussed together with those of methyl to butyl ethers. The experimental critical constants of the ethers have been compared with those estimated by the group-contribution methods of Wilson and Jasperson and Marrero and Gani. The Wilson/Jasperson method provides a better estimation of the critical temperatures and pressures of simple aliphatic ethers in comparison with the Marrero/Gani method if reliable normal boiling temperatures are used in the method of Wilson and Jasperson

Derivatives of phenyl tribromomethyl sulfone as novel compounds with potential pesticidal activity

Directory of Open Access Journals (Sweden)

Krzysztof M. Borys

2012-02-01

Full Text Available A halogenmethylsulfonyl moiety is incorporated in numerous active herbicides and fungicides. The synthesis of tribromomethyl phenyl sulfone derivatives as novel potential pesticides is reported. The title sulfone was obtained by following three different synthetic routes, starting from 4-chlorothiophenol or 4-halogenphenyl methyl sulfone. Products of its subsequent nitration were subjected to the SNAr reactions with ammonia, amines, hydrazines and phenolates to give 2-nitroaniline, 2-nitrophenylhydrazine and diphenyl ether derivatives. Reduction of the nitro group of 4-tribromomethylsulfonyl-2-nitroaniline yielded the corresponding o-phenylenediamine substrate for preparation of structurally varied benzimidazoles.

Chlorine isotope evidence for the anthropogenic origin of tris-(4-chlorophenyl)methane

International Nuclear Information System (INIS)

Holmstrand, Henry; Zencak, Zdenek; Mandalakis, Manolis; Andersson, Per; Gustafsson, Orjan

2010-01-01

Research highlights: → TCPMe is a bioaccumulating organochlorine found at significant levels in organisms at high trophic levels, e.g. birds and mammals. → Previous investigations have suggested TCPMe being co-released as a trace byproduct in pesticides such as DDT. → The results from compound-specific chlorine isotope analysis of TCPMe supports the hypothesis that the source of TCPMe is indeed the extensive historical use of DDT. - Abstract: Compound-specific Cl-isotope analysis was performed on the persistent and bioaccumulating compound tris-(4-chlorophenyl)methane (4,4',4''-TCPMe, referred to as TCPMe in this study) to elucidate whether its main source is natural or anthropogenic. Blubber from the Baltic grey seal (Halichoerus grypus) was extracted by continuous acetonitrile partitioning, and the TCPMe was isolated from the extract by preparative-capillary gas chromatography. Chlorine isotope analysis was subsequently performed by sealed-tube combustion in conjunction with thermal-ionization mass spectrometry (TIMS). The δ 37 Cl of TCPMe was -3.5 ± 0.5 per mille, similar to the previously reported δ 37 Cl of technical grade p,p'-DDT (referred to as DDT in this study). The data is not consistent with a putative marine natural source of TCPMe, as enzymatic (biotic) production is reported to give values of δ 37 Cl 37 Cl-TCPMe data thus supports the hypothesis that TCPMe is produced as a byproduct during DDT synthesis and is released to the environment through the same pathways as DDT. It is also consistent with tris-(4-chlorophenyl)methanol as the primary biotransformation product of TCPMe.

Synthesis of Azole-containing Piperazine Derivatives and Evaluation of their Antibacterial, Antifungal and Cytotoxic Activities

International Nuclear Information System (INIS)

Gan, Lin Ling; Fang, Bo; Zhou, Cheng He

2010-01-01

A series of azole-containing piperazine derivatives have been designed and synthesized. The obtained compounds were investigated in vitro for their antibacterial, antifungal and cytotoxic activities. The preliminary results showed that most compounds exhibited moderate to significant antibacterial and antifungal activities in vitro. 1-(4-((4-chlorophenyl) (phenyl)methyl)piperazin-1-yl)-2-(1H-imidazol-1-yl)ethanone and 1-(4-((4-Chlorophenyl)(phenyl)methyl)piperazin-1- yl)-2-(2-phenyl-1H-imidazol-1-yl)ethanone gave remarkable and broad-spectrum antimicrobial efficacy against all tested strains with MIC values ranging from 3.1 to 25 μg/mL, and exhibited comparable activities to the standard drugs chloramphenicol and fluconazole in clinic. Moreover, 2-((4-((4-chlorophenyl)(phenyl)methyl)piperazin-1-yl)methyl)- 1H-benzo[d]imidazole was found to be the most effective in vitro against the PC-3 cell line, reaching growth inhibition values (36.4, 60.1 and 76.5%) for each tested concentration: 25 μM, 50 μM and 100 μM in dose-dependent manner. The results also showed that the azole ring had noticeable effect on their antimicrobial and cytotoxic activities, and imidazole and benzimidazole moiety were much more favourable to biological activity than 1,2,4-triazole

Synthesis of Azole-containing Piperazine Derivatives and Evaluation of their Antibacterial, Antifungal and Cytotoxic Activities

Energy Technology Data Exchange (ETDEWEB)

Gan, Lin Ling; Fang, Bo; Zhou, Cheng He [Southwest University, Chongqing (China)

2010-12-15

A series of azole-containing piperazine derivatives have been designed and synthesized. The obtained compounds were investigated in vitro for their antibacterial, antifungal and cytotoxic activities. The preliminary results showed that most compounds exhibited moderate to significant antibacterial and antifungal activities in vitro. 1-(4-((4-chlorophenyl) (phenyl)methyl)piperazin-1-yl)-2-(1H-imidazol-1-yl)ethanone and 1-(4-((4-Chlorophenyl)(phenyl)methyl)piperazin-1- yl)-2-(2-phenyl-1H-imidazol-1-yl)ethanone gave remarkable and broad-spectrum antimicrobial efficacy against all tested strains with MIC values ranging from 3.1 to 25 μg/mL, and exhibited comparable activities to the standard drugs chloramphenicol and fluconazole in clinic. Moreover, 2-((4-((4-chlorophenyl)(phenyl)methyl)piperazin-1-yl)methyl)- 1H-benzo[d]imidazole was found to be the most effective in vitro against the PC-3 cell line, reaching growth inhibition values (36.4, 60.1 and 76.5%) for each tested concentration: 25 μM, 50 μM and 100 μM in dose-dependent manner. The results also showed that the azole ring had noticeable effect on their antimicrobial and cytotoxic activities, and imidazole and benzimidazole moiety were much more favourable to biological activity than 1,2,4-triazole.

Deriving Biomonitoring Equivalents for selected E- and P-series glycol ethers for public health risk assessment.

Science.gov (United States)

Poet, Torka; Ball, Nicholas; Hays, Sean M

2016-01-01

Glycol ethers are a widely used class of solvents that may lead to both workplace and general population exposures. Biomonitoring studies are available that have quantified glycol ethers or their metabolites in blood and/or urine amongst exposed populations. These biomonitoring levels indicate exposures to the glycol ethers, but do not by themselves indicate a health hazard risk. Biomonitoring Equivalents (BEs) have been created to provide the ability to interpret human biomonitoring data in a public health risk context. The BE is defined as the concentration of a chemical or metabolite in a biological fluid (blood or urine) that is consistent with exposures at a regulatory derived safe exposure limit, such as a tolerable daily intake (TDI). In this exercise, we derived BEs for general population exposures for selected E- and P-series glycol ethers based on their respective derived no effect levels (DNELs). Selected DNELs have been derived as part of respective Registration, Evaluation, Authorisation and Regulation of Chemicals (REACh) regulation dossiers in the EU. The BEs derived here are unique in the sense that they are the first BEs derived for urinary excretion of compounds following inhalation exposures. The urinary mass excretion fractions (Fue) of the acetic acid metabolites for the E-series GEs range from approximately 0.2 to 0.7. The Fues for the excretion of the parent P-series GEs range from approximately 0.1 to 0.2, with the exception of propylene glycol methyl ether and its acetate (Fue = 0.004). Despite the narrow range of Fues, the BEs exhibit a larger range, resulting from the larger range in DNELs across GEs. The BEs derived here can be used to interpret human biomonitoring data for inhalation exposures to GEs amongst the general population. Copyright © 2015 Elsevier GmbH. All rights reserved.

5-(4-Methoxyphenyl-4-methyl-1-phenyl-3-p-tolyl-1H-pyrazole

Directory of Open Access Journals (Sweden)

Yahya Ben Soumane

2017-11-01

Full Text Available The title compound, C24H22N2O, crystallizes with two independent molecules (A and B in the asymmetric unit. The phenyl, p-tolyl and p-methoxyphenyl rings are inclined to the pyrazole ring by 42.5 (2, 17.68 (19 and 52.20 (19°, respectively, in molecule A, and by 39.5 (2, 40.77 (19 and 59.76 (18°, respectively, in molecule B. In the asymmetric unit, the pyrarole ring of molecule A makes a dihedral angle of 3.7 (2° with that of molecule B. In the crystal, the two independent molecules are linked to each other by a C—H...O hydrogen bond.

Leaching of dieldrin, permethrin, phenyl urea and 4-CL phenyl urea pesticides from soil

International Nuclear Information System (INIS)

Onal, G.

1978-01-01

Leaching of four 14 C-labelled pesticides (dieldrin, permethrin, phenyl urea and 4-Cl phenyl urea) were investigated. It was found that dieldrin and permethrin were not leached from soil but adsorbed by the soil; phenyl urea and 4-CL phenyl urea were leached to a 7.5 cm depth

Pregnane X receptor-dependent induction of the CYP3A4 gene by o,p'-1,1,1,-trichloro-2,2-bis (p-chlorophenyl)ethane.

Science.gov (United States)

Medina-Díaz, Irma M; Arteaga-Illán, Georgina; de León, Mario Bermudez; Cisneros, Bulmaro; Sierra-Santoyo, Adolfo; Vega, Libia; Gonzalez, Frank J; Elizondo, Guillermo

2007-01-01

CYP3A4, the predominant cytochrome P450 (P450) expressed in human liver and intestine, contributes to the metabolism of approximately half the drugs in clinical use today. CYP3A4 catalyzes the 6beta-hydroxylation of a number of steroid hormones and is involved in the bioactivation of environmental procarcinogens. The expression of CYP3A4 is affected by several stimuli, including environmental factors such as insecticides and pesticides. The o,p'-1,1,1,-trichloro-2,2-bis (p-chlorophenyl)ethane (DDT) isomer of DDT comprises approximately 20% of technical grade DDT, which is an organochloride pesticide. We have recently shown that o,p'-DDT exposure increases CYP3A4 mRNA levels in HepG2 cells. To determine the mechanism by which o,p'-DDT induces CYP3A4 expression, transactivation and electrophoretic mobility shift assays were carried out, revealing that o,p'-DDT activates the CYP3A4 gene promoter through the pregnane X receptor (PXR). CYP3A4 gene promoter activation resulted in both an increase in CYP3A4 mRNA levels and an increase in the total CYP3A4 activity in HepG2 cells. We also observed induction of CYP3A4 and mouse Cyp3a11 mRNA in the intestine of CYP3A4-transgenic mice after exposure to 1 mg/kg o,p'-DDT. At higher doses, a decrease of CYP3A4 inducibility was observed together with an increase in levels of interleukin 6 mRNA, a proinflammatory cytokine that strongly represses CYP3A4 transcription. The present study indicates that regulation of other genes under PXR control may be altered by o,p'-DDT exposure.

Synthesis, crystal structure, DFT studies, acid dissociation constant, and antimicrobial activity of methyl 2-(4-chlorophenyl)-7a-((4-chlorophenyl)carbamothioyl)-1-oxo-5,5-diphenyl-3-thioxo-hexahydro-1H-pyrrolo[1,2-e]imidazole-6-carboxylate

Science.gov (United States)

Nural, Yahya; Gemili, Muge; Seferoglu, Nurgul; Sahin, Ertan; Ulger, Mahmut; Sari, Hayati

2018-05-01

A novel bicyclic thiohydantoin fused to pyrrolidine compound, methyl 2-(4-chlorophenyl)-7a-((4-chlorophenyl)carbamothioyl)-1-oxo-5,5-diphenyl-3-thioxo-hexahydro-1H-pyrrolo[1,2-e]imidazole-6-carboxylate, was synthesized by the cyclization reaction of dimethyl 5,5-diphenylpyrrolidine-2,4-dicarboxylate and 4-chlorophenyl isothiocyanate in the presence of 4-(dimethylamino)pyridine to form methyl 2-(4-chlorophenyl)-1-oxo-5,5-diphenyl-3-thioxo-hexahydro-1H-pyrrolo[1,2-e]imidazole-6-carboxylate with concomitant addition reaction of the 4-chlorophenyl isothiocyanate in 79% yield. The structural characterization was performed by NMR, FT-IR, MS and HRMS techniques, and the stereochemistry of the compound was determined by single crystal X-ray diffraction study. In addition, the molecular structure and 1H and 13C NMR chemical shifts of the compound were obtained with the density functional theory and Hartree-Fock calculations. Acid dissociation constants of the compound were determined using potentiometric titration method in 25% (v/v) dimethyl sulfoxide-water hydroorganic solvent at 25 ± 0.1 °C, at an ionic background of 0.1 mol/L of NaCl using the HYPERQUAD computer program. Four acid dissociation constants were obtained for the compound, and we suggest that these acid dissociation constants are related to the NH, for two groups of enthiols and enol groups. Antimicrobial activity study was performed against S. aureus, B. subtilis, A. hydrophila, E. coli and A. baumannii as bacterial standard strains, and against M. tuberculosis H37Rv as mycobacterial strain. The compound exhibited antibacterial activity in the range of 31.25-62.5 μg/mL, and antimycobacterial activity with a MIC value of 40 μg/mL against the indicated strains.

Detection of DDT and its metabolites in two estuaries of South China using a SPME-based device: First report of p,p'-DDMU in water column

International Nuclear Information System (INIS)

Xing Yuanna; Guo Ying; Xie Mei; Shen Rulang; Zeng, Eddy Y.

2009-01-01

A solid-phase microextration-based sampling method was employed to determine the concentrations of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and its metabolites, 1,1-dichloro-2,2-bis(p-chlorophenyl)ethane (DDD), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (DDE) and 1-chloro-2,2-bis(p-chlorophenyl)ethene (DDMU), in two estuarine bays, Daya Bay and Hailing Bay, of South China. Six DDT components including p,p'-DDT, o,p'-DDD, p,p'-DDD, o,p'-DDE, p,p'-DDE, and p,p'-DDMU were detected in Hailing Bay, while only p,p'-DDD was found in Daya Bay. p,p'-DDD was the most abundant DDT component in both bays, sharply different from the previous finding in the water column of the Palos Verdes Shelf, California, USA that p,p'-DDE was prevalent. In addition, the occurrence of p,p'-DDMU (with a range of 0.047-0.21 ng/L in Hailing Bay) has not been reported around the globe, and its presence in our study region appeared to stem from dehydrochlorination of p,p'-DDD, favored under aerobic conditions, but further investigations are clearly needed to confirm the mechanism for generation of DDMU in estuarine environments. - DDT and its metabolites, particularly p,p'-DDMU, are detected in the water column of two estuarine bays in South China using a SPME-based sampler

Nondoped deep blue OLEDs based on Bis-(4-benzenesulfonyl-phenyl)-9-phenyl-9H-carbazoles

International Nuclear Information System (INIS)

Huang, Bin; Yin, Zhihui; Ban, Xinxin; Ma, Zhongming; Jiang, Wei; Tian, Wenwen; Yang, Min; Ye, Shanghui; Lin, Baoping; Sun, Yueming

2016-01-01

Two bipolar materials based on 9-phenylcarbazole and diphenyl sulfone for nondoped deep blue OLEDs, namely bis-(4-benzenesulfonyl-phenyl)-9-phenyl-9H-carbazoles, have been designed and synthesized by Suzuki coupling reactions. Their thermal, photophysical, and electrochemical properties have been systematically investigated. The nondoped devices using 3,6–bis–(4-benzenesulfonyl-phenyl)-9-phenyl-9H-carbazoles and 2,7-bis-(4-benzenesulfonyl-phenyl)-9-phenyl-9H-carbazoles as the emitters show deep blue emission color with peaks at 424 and 444 nm, and the Commission Internationale de l'Eclairage (CIE) coordinates of (0.177, 0.117) and (0.160, 0.117), respectively. Furthermore, these materials based devices have high color-purity with small width at half-maximum (FWHM) of 65 and 73 nm, respectively. The results provide a novel approach for the design of deep blue emitter for nondoped OLEDs.

Biodegradation of 1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane (DDT) by using Serratia marcescens NCIM 2919.

Science.gov (United States)

Grewal, Jasneet; Bhattacharya, Amrik; Kumar, Sumit; Singh, Dileep K; Khare, Sunil K

2016-12-01

A solvent tolerant bacterium Serratia marcescens NCIM 2919 has been evaluated for degradation of DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane). The bacterium was able to degrade up to 42% of initial 50 mg L -1 of DDT within 10 days of incubation. The highlight of the work was the elucidation of DDT degradation pathway in S. marcescens. A total of four intermediates metabolites viz. 2,2-bis (chlorophenyl)-1,1-dichloroethane (DDD), 2,2-bis (chlorophenyl)-1,1-dichloroethylene (DDE), 2,2-bis (chlorophenyl)-1-chloroethylene (DDMU), and 4-chlorobenzoic acid (4-CBA) were identified by GC-Mass and FTIR. 4-CBA was found to be the stable product of DDT degradation. Metabolites preceding 4-CBA were not toxic to strain as reveled through luxuriant growth in presence of varying concentrations of exogenous DDD and DDE. However, 4-CBA was observed to inhibit the growth of bacterium. The DDT degrading efficiency of S. marcescens NCIM 2919 hence could be used in combination with 4-CBA utilizing strains either as binary culture or consortia for mineralization of DDT. Application of S. marcescens NCIM 2919 to DDT contaminated soil, showed 74.7% reduction of initial 12.0 mg kg -1 of DDT after 18-days of treatment.

Radioiodinated fatty acid carnitine ester: synthesis and biodistribution of 15-(p-iodo[131I]-phenyl)pentadecanoyl-D,L-carnitine chloride

International Nuclear Information System (INIS)

Eisenhut, M.; Liefhold, J.

1986-01-01

After the uptake into heart muscle cells long chain fatty acids enter predominantly into the triglyceride and phospholipid pool before they are degraded in the mitochondria by β-oxidation. Therefore the formation of fatty acid esters with glycerine obscures the functional ability of the heart namely to catabolize free fatty acids. The sum of the two reaction pathways are visualized by sequential heart scintigraphy with e.g. 131 I labeled 15-(p-iodo-phenyl)-pentadecanoic acid (IPPA). Before the fatty acids can be degraded by β-oxidation they are bound to carnitine for mitochondrial membrane transport. Thus IPPA would not participate in lipid formation, if it is offered as 15-(p-iodo[ 131 I]-phenyl)-pentadecanoyl-D,L-carnitine chloride (IPPA-CE) to the heart muscle cells. Additionally carnitine esters of fatty acids are known to be better substrates for β-oxidation than free fatty acids. We were therefore interested in the biochemical fate of radioiodinated IPPA-CE in rats. (author)

Synthesis of 1-(4-methylsulfone-phenyl)-5-(4-fluoro-phenyl)-5-[14C]-1,2,3- triazole and 1-(4-sulfonamide-phenyl)-5-(4-fluoro-phenyl)-5-[14C]-1,2,3- triazole as novel carbon-14 anticonvulsant

International Nuclear Information System (INIS)

Saemian, N.; Shirvani, G.; Matloubi, H.

2006-01-01

Two 1,2,3-triazole anticonvulsants, 1-(4-methylsulfone-phenyl)-5-(4-fluoro-phenyl)-5-[ 14 C]-1,2,3-triazole and 1-(4-sulfonamide-phenyl)-5-(4- fluoro-phenyl)-5-[ 14 C]-1,2,3-triazole, both labeled with carbon-14 in the 5-position were prepared from para-fluoro-benzonitrile-[cyano- 14 C]. (author)

Side-chain sulfonated poly(ether sulfone)s for PEM applications

Energy Technology Data Exchange (ETDEWEB)

Meier-Haack, J.; Butwilowski, W.; Quetschke, A.; Vogel, C. [Leibniz Institute of Polymer Research Dresden, Dresden (Germany)

2010-07-01

Copoly(arylene ether sulfone)s from bis-(4-fluoro phenyl)sulfone (DFDPhS), bis(4-trimethylsiloxy phenyl)sulfone (DHDPhS), and 2,5-diphenylhydroquinone trimethylsilylether (Bis-TMS-DPhHQ) were obtained by nucleophilic displacement polycondensation with high molecular weights (M{sub n} up to 70,000 g/mol; {eta}{sub inh} up to 0.93 dl/g) and narrow molecular weight distributions (2.1 - 2.9). All copolymers showed a single glass-transition temperature (T{sub g}) around 230 C. Upon sulfonation with concentrated sulfuric acid, the T{sub g}s (from samples in the protonated form) were shifted to higher temperatures (+ 35 {+-} 5 C). NMR spectra and the determined ion-exchange capacities (IEC; 1.46 - 2.05 mmol/g), which were close to the theoretical values, indicating that only the pendant phenyl rings of the 2,5- diphenylhydroquinone moieties in the polymer backbone were sulfonated. Membranes prepared from N-methyl- 2-pyrrolidone (NMP) solutions were transparent and soft. The water-uptake at room temperature increased from 30% to 80% with increasing IEC. Samples from random copolymers with an IEC {>=} 1.8 mmol/g were soluble in water at 90 C. While the proton conductivity of the low IEC samples (random copolymer) (1.46 mmol/g) was lower than that of Nafion {sup registered}, the conductivities of the high IEC samples were superior to Nafion {sup registered}. In general membranes from blockcopolymers showed lower water-uptake, higher dimensional stability and higher proton conductivities as compared to samples from random copolymers with similar monomer composition and ion-exchange capacities. (orig.)

Cardiac metabolism of 15 (p-I-123 phenyl-) pentadecanoic acid after intracoronary tracer application

Energy Technology Data Exchange (ETDEWEB)

Reske, S.N.; Reichmann, K.; Knopp, R.; Winkler, C.; Koischwitz, D.; Machulla, H.J.; Simon, H.

1984-05-01

Myocardial turnover of ..omega..-(p/sup 123/I-Phenyl-) pentadecanoic acid and release of its metabolites into the coronary sinus and peripheral blood has been studied in patients with coronary artery and valvular heart disease. After intracoronary tracer injection myocardial extraction fractions of 45-53% in control subjects were observed. In patients with coronary artery disease (CAD) normal to reduced values (34-61%) were established. Hydrophilic catabolites of I-PPA, probably p/sup 123/I-benzoic and -hippuric acid as well as small amounts of the non-metabolized tracer were found in coronary sinus and peripheral blood. Myocardial tracer uptake and clearance patterns were clearly different in normal myocardium when compared to that obtained in patients with CAD. Thus, evaluation of myocardial I-PPA metabolism might provide a new diagnostic tool for assessment of integrity of the heart's muscular metabolic function.

Real time in situ spectroscopic characterization of radiation induced cationic polymerization of glycidyl ethers

International Nuclear Information System (INIS)

Mascioni, Matteo; Sands, James M.; Palmese, Giuseppe R.

2003-01-01

Radiation curable polymeric materials suffer from relatively poor mechanical properties. Moreover, the curing behavior of such systems (i.e. the exact relationship between chemical kinetics and key processing variables) is not fully understood. In order to design improved epoxy based electron beam (EB) curable systems, and in order to develop appropriate process models, a detailed knowledge of the kinetics of epoxy cationic polymerization induced by ultraviolet (UV) or EB irradiation is required. In this work, we present our development of a technique based on real time near infrared (RTIR) spectroscopy for performing in situ kinetic analysis of radiation induced cationic polymerization of epoxy systems. To our knowledge this is the first time such data have been collected and presented for high-energy EB (10 MeV) induced polymerization. A demonstration of the technique for deterministic evaluation of degree of cure is shown using model glycidyl ether (phenyl glycidyl ether and diglycidyl ether of bisphenol A) resins and isothermal curing conditions. The impact of initiation rate on polymerizations with UV and EB for the cationic initiator is directly evident by comparative analysis. The sensitivity of the RTIR method and ability to produce quantitative data evidence of reaction mechanisms is demonstrated. The type of data presented in this work forms the basis for cure models being developed

ynthesis, theoretical study on Zinc (II and Ni(II complexes of 5-methoxyisatin 3-[N-(4-chlorophenyl thiosemicarbazone

Directory of Open Access Journals (Sweden)

Fatma Kandemirli

2012-03-01

Full Text Available Zinc(II and nickel(II-complexes of 5-methoxyisatin 3-[N-(4-chlorophenyl thiosemicarbazone] (H2MICP were synthesized and characterized by infrared, ultraviolet and 1H-NMR spectroscopies as well as elemental analysis. Model of H2MICP and its zinc(II and nickel(II-complexes were optimized with B3LYP method using 6-31G(d,p, 6-311G(d,p, 6-311++G(d,p, 6-311++G(2d,2p basis sets. The calculated 1H-NMR, UV and IR spectra data were compared with experimental results. In addition to the Natural Bond Orbital (NBO analysis of H2MICP and its Zinc(II and Nickel(II complexes, Fukui functions of H2MICP were also reported.

Effect of fungal mycelia on the HPLC-UV and UV-vis spectrophotometric assessment of mycelium-bound epoxide hydrolase using glycidyl phenyl ether.

Science.gov (United States)

Dolcet, Marta M; Torres, Mercè; Canela, Ramon

2016-06-25

The use of mycelia as biocatalysts has technical and economic advantages. However, there are several difficulties in obtaining accurate results in mycelium-catalysed reactions. Firstly, sample extraction, indispensable because of the presence of mycelia, can bring into the extract components with a similar structure to that of the analyte of interest; secondly, mycelia can influence the recovery of the analyte. We prepared calibration standards of 3-phenoxy-1,2-propanediol (PPD) in the pure solvent and in the presence of mycelia (spiked before or after extraction) from five fungi (Aspergillus niger, Aspergillus tubingensis, Penicillium aurantiogriseum, Penicillium sp. and Aspergillus terreus). The quantification of PPD was carried out by HPLC-UV and UV-vis spectrophotometry. The manuscript shows that the last method is as accurate as the HPLC method. However, the colorimetric method led to a higher data throughput, which allowed the study of more samples in a shorter time. Matrix effects were evaluated visually from the plotted calibration data and statistically by simultaneously comparing the intercept and slope of calibration curves performed with solvent, post-extraction spiked standards and pre-extraction spiked standards. Significant differences were found between the post- and pre-extraction spiked matrix-matched functions. Pre-extraction spiked matrix-matched functions based on A. tubingensis mycelia, selected as the reference, were validated and used to compensate for low recoveries. These validated functions were successfully applied to the quantification of PPD achieved during the hydrolysis of glycidyl phenyl ether by mycelium-bound epoxide hydrolases and equivalent hydrolysis yields were determined by HPLC-UV and UV-vis spectrophotometry. This study may serve as starting point to implement matrix effects evaluation when mycelium-bound epoxide hydrolases are studied. Copyright © 2016 Elsevier B.V. All rights reserved.

Selective hydrogenolysis of Α–O–4, Β–O–4, 4–O–5 C–O bonds of lignin-model compounds and lignin-containing stillage derived from cellulosic bioethanol processing

NARCIS (Netherlands)

Gómez-Monedero, B.; Ruiz, M. P.; Bimbela, F.; Faria, J.

2017-01-01

Benzyl phenyl ether (BPE), phenethyl phenyl ether (PPE) and diphenyl ether (DPE) have been selected as model compounds of the most abundant and significant ether linkages found within the complex structure of lignin (e.g. α–O–4, β–O–4, and 4–O–5, respectively). The catalytic hydrogenolysis of these

Comparison of Properties among Dendritic and Hyperbranched Poly(ether ether ketones and Linear Poly(ether ketones

Directory of Open Access Journals (Sweden)

Atsushi Morikawa

2016-02-01

Full Text Available Poly(ether ether ketone dendrimers and hyperbranched polymers were prepared from 3,5-dimethoxy-4′-(4-fluorobenzoyldiphenyl ether and 3,5-dihydroxy-4′-(4-fluorobenzoyldiphenyl ether through aromatic nucleophilic substitution reactions. 1-(tert-Butyldimethylsiloxy-3,5-bis(4-fluorobenzoylbenzene was polycondensed with bisphenols, followed by cleavage of the protective group to form linear poly(ether ketones having the same hydroxyl groups in the side chains as the chain ends of the dendrimer and hyperbranched polymers. Their properties, such as solubilities, reduced viscosities, and thermal properties, were compared with one another. Similar comparisons were also carried out among the corresponding methoxy group polymers, and the size of the molecules was shown to affect the properties.

Synthesis and Properties of Poly(ether sulfone)s with Clustered Sulfonic Groups for PEMFC Applications under Various Relative Humidity.

Science.gov (United States)

Lee, Shih-Wei; Chen, Jyh-Chien; Wu, Jin-An; Chen, Kuei-Hsien

2017-03-22

Novel sulfonated poly(ether sulfone) copolymers (S4PH-x-PSs) based on a new aromatic diol containing four phenyl substituents at the 2, 2', 6, and 6' positions of 4,4'-diphenyl ether were synthesized. Sulfonation was found to occur exclusively on the 4 position of phenyl substituents by NMR spectroscopy. The ion exchange capacity (IEC) values can be controlled by adjusting the mole percent (x in S4PH-x-PS) of the new diol. The fully hydrated sulfonated poly(ether sulfone) copolymers had good proton conductivity in the range 0.004-0.110 S/cm at room temperature. The surface morphology of S4PH-x-PSs and Nafion 212 was investigated by atomic force microscopy (tapping-mode) and related to the percolation limit and proton conductivity. Single H 2 /O 2 fuel cell based on S4PH-40-PS loaded with 0.25 mg/cm 2 catalyst (Pt/C) exhibited a peak power density of 462.6 mW/cm 2 , which was close to that of Nafion 212 (533.5 mW/cm 2 ) at 80 °C with 80% RH. Furthermore, fuel cell performance of S4PH-35-PS with various relative humidity was investigated. It was confirmed from polarization curves that the fuel cell performance of S4PH-35-PS was not as high as that of Nafion 212 under fully hydrated state due to higher interfacial resistance between S4PH-35-PS and electrodes. While under low relative humidity (53% RH) at 80 °C, fuel cells based on S4PH-35-PS showed higher peak power density (234.9 mW/cm 2 ) than that (214.0 mW/cm 2 ) of Nafion 212.

Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel

International Nuclear Information System (INIS)

Mohan, Balaji; Yang, Wenming; Yu, Wenbin; Tay, Kun Lin

2017-01-01

Highlights: • Thermo-physical properties of liquid DME and DEE are reported. • Ether fuels tend to cavitate higher compared to that of diesel fuel. • Spray tip penetration and SMD are found to be lesser for ether fuels. • Ether fuels shows excellent atomization behavior. - Abstract: In this work, the spray characteristics of ether fuels such as dimethyl ether (DME) and diethyl ether (DEE) have been numerically investigated using KIVA-4 CFD code. A new hybrid spray model developed by coupling the standard KHRT model to cavitation sub model was used. The detailed thermo-physical properties of ether fuels have been predicted and validated with experimental results available from literature. The cavitation inception inside the injector nozzle hole has been studied for ether fuels in comparison with diesel fuel. It was found that ether fuels cavitates higher compared to that of conventional diesel fuel because of its low viscosity. The spray tip penetration of diesel fuel was longer than that of ether fuels due to high viscosity and density of diesel fuel. Ether fuels characterized by low Ohnesorge number and high Reynolds number showed better atomization behavior compared to that of the diesel fuel.

Ruthenium Catalyzed Diastereo- and Enantioselective Coupling of Propargyl Ethers with Alcohols: Siloxy-Crotylation via Hydride Shift Enabled Conversion of Alkynes to π-Allyls.

Science.gov (United States)

Liang, Tao; Zhang, Wandi; Chen, Te-Yu; Nguyen, Khoa D; Krische, Michael J

2015-10-14

The first enantioselective carbonyl crotylations through direct use of alkynes as chiral allylmetal equivalents are described. Chiral ruthenium(II) complexes modified by Josiphos (SL-J009-1) catalyze the C-C coupling of TIPS-protected propargyl ether 1a with primary alcohols 2a-2o to form products of carbonyl siloxy-crotylation 3a-3o, which upon silyl deprotection-reduction deliver 1,4-diols 5a-5o with excellent control of regio-, anti-diastereo-, and enantioselectivity. Structurally related propargyl ethers 1b and 1c bearing ethyl- and phenyl-substituents engage in diastereo- and enantioselective coupling, as illustrated in the formation of adducts 5p and 5q, respectively. Selective mono-tosylation of diols 5a, 5c, 5e, 5f, 5k, and 5m is accompanied by spontaneous cyclization to deliver the trans-2,3-disubstituted furans 6a, 6c, 6e, 6f, 6k, and 6m, respectively. Primary alcohols 2a, 2l, and 2p were converted to the siloxy-crotylation products 3a, 3l, and 3p, which upon silyl deprotection-lactol oxidation were transformed to the trans-4,5-disubstituted γ-butyrolactones 7a, 7l, and 7p. The formation of 7p represents a total synthesis of (+)-trans-whisky lactone. Unlike closely related ruthenium catalyzed alkyne-alcohol C-C couplings, deuterium labeling studies provide clear evidence of a novel 1,2-hydride shift mechanism that converts metal-bound alkynes to π-allyls in the absence of intervening allenes.

Preparation and characterization of new poly(amide–imide reinforced layer silicate nanocomposite containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid

Directory of Open Access Journals (Sweden)

Khalil Faghihi

2014-12-01

Full Text Available Two new samples of poly(amide–imide/montmorillonite reinforced nanocomposites containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide–imide (PAI 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N′-pyrromelitoyl-bis-l-phenyl acetic acid 1 with 4,4′-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 10% and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using UV–vis spectroscopy, thermogravimetric analysis (TGA and water uptake measurements.

Low vanadium ion permeabilities of sulfonated poly(phthalazinone ether ketone)s provide high efficiency and stability for vanadium redox flow batteries

Science.gov (United States)

Chen, Liyun; Zhang, Shouhai; Chen, Yuning; Jian, Xigao

2017-07-01

A series of novel sulfonated poly(phthalazinone ether ketone)s containing pendant phenyl moieties (SPPEK-Ps) are synthesized and thoroughly characterized. The chemical structures of the polymers are confirmed by 1H NMR and FTIR analysis. The physicochemical properties and single cell performance of SPPEK-P membranes are systematically evaluated, revealing that the membranes are thermally, chemically and mechanically stable. The area resistances of SPPEK-P-90 and SPPEK-P-100 are 0.75 Ω cm2 and 0.34 Ω cm2, respectively. SPPEK-P membranes are impermeable to the bulky hydrated VO2+ ion and exhibited low V3+ ion permeability (SPPEK-P-90, 2.53 × 10-5 cm min-1) (Nafion 115 membrane: 9.0 × 10-4 cm min-1). Tests of SPPEK-P-90 in vanadium redox flow batteries (VRFBs) demonstrate a comparable columbic efficiency (CE) and energy efficiency (EE) to that of Nafion 115, where the CE is 98% and the EE is 83% at 60 mA cm-2. Moreover, the SPPEK-P-90 membrane exhibits stable performance in cell over 100 charge-discharge cycles (∼450 h).

1,5-Bis(4-chlorophenyl-3-[4-(dimethylaminophenyl]pentane-1,5-dione

Directory of Open Access Journals (Sweden)

2009-03-01

Full Text Available In the title molecule, C25H23Cl2NO2, the central benzene ring forms dihedral angles of 81.88 (7 and 89.22 (7° with the two 4-chlorophenyl fragments. The crystal packing exhibits weak intermolecular C—H...O hydrogen bonds and π–π interactions [centroid–centroid distance 3.724 (3 Å].

Exposure Assessment to Environmental Chemicals in Children from Ciudad Juarez, Chihuahua, Mexico.

Science.gov (United States)

Ochoa-Martinez, Angeles C; Orta-Garcia, Sandra T; Rico-Escobar, Edna M; Carrizales-Yañez, Leticia; Del Campo, Jorge D Martin; Pruneda-Alvarez, Lucia G; Ruiz-Vera, Tania; Gonzalez-Palomo, Ana K; Piña-Lopez, Iris G; Torres-Dosal, Arturo; Pérez-Maldonado, Ivan N

2016-05-01

It has been demonstrated that the human biomonitoring of susceptible populations is a valuable method for the identification of critical contaminants. Therefore, the purpose of this study was to assess the exposure profile for arsenic (As), lead (Pb), mercury (Hg), 1-hydroxypyrene (1-OHP), 1,1-bis(p-chlorophenyl)-2,2,2-trichloroethane (DDT), 1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene (DDE), polybrominated diphenyl ethers (PBDEs), and polychlorinated biphenyls (PCBs) in children living in Ciudad Juarez, Chihuahua, Mexico (a major manufacturing center in Mexico). In 2012, we evaluated a total of 135 healthy children living in Ciudad Juarez since birth. The total PBDEs levels ranged from nondetectable (exposure levels to chemicals analyzed in the children living in the study community. Therefore, a biomonitoring program for the surveillance of the child population in Ciudad Juarez is necessary.

Extraction and spectrophotometric determination of vanadium(V) with N-hydroxy-N-m-tolyl-N'-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride in presence of salicylic, anthranilic and phthalic acids

Energy Technology Data Exchange (ETDEWEB)

Patel, K S; Deb, K K; Mishra, R [Ravishankar Univ., Raipur (India). Dept. of Chemistry

1981-02-01

The present work deals with the solvent extraction and simultaneous spectrophotometric determination of microgram quantities of vanadium(V) as mixed ligand complex with N-hydroxy-N-m-tolyl-N'-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HTMCPTH) and six carboxylic acids viz. salicylic, acetylsalicylic (aspirin), sulfosalicylic, anthranilic, N-phenyl-anthranilic and phthalic. The method presented here is simple, rapid, sensitive and reasonably selective.

Extraction and spectrophotometric determination of vanadium(V) with N-hydroxy-N-m-tolyl-N'-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride in presence of salicylic, anthranilic and phthalic acids

International Nuclear Information System (INIS)

Patel, K.S.; Deb, K.K.; Mishra, R.

1981-01-01

The present work deals with the solvent extraction and simultaneous spectrophotometric determination of microgram quantities of vanadium(V) as mixed ligand complex with N-hydroxy-N-m-tolyl-N'-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HTMCPTH) and six carboxylic acids viz. salicylic, acetylsalicylic (aspirin), sulfosalicylic, anthranilic, N-phenyl-anthranilic and phthalic. The method presented here is simple, rapid, sensitive and reasonably selective. (author)

Cosmic Ether

CERN Document Server

Tomaschitz, R

1998-01-01

A prerelativistic approach to particle dynamics is explored in an expanding Robertson-Walker cosmology. The receding galactic background provides a distinguished frame of reference and a unique cosmic time. In this context the relativistic, purely geometric space-time concept is criticized. Physical space is regarded as a permeable medium, the cosmic ether, which effects the world-lines of particles and rays. We study in detail a Robertson-Walker universe with linear expansion factor and negatively curved, open three-space; we choose the permeability tensor of the ether in such a way that the semiclassical approximation is exact. Galactic red-shifts depend on the refractive index of the ether. In the local Minkowskian limit the ether causes a time variation of mass, which scales inversely proportional to cosmic time. In the globally geodesic rest frames of galactic observers the ether manifests itself in an unbounded speed of signal transfer, in bifurcations of world-lines, and in time inversion effects.

Alkylarylnitrosoureas--stability in aqueous solution, partition coefficient, alkylating activity and its relationship to SCE induction in Chinese hamster V 79-E cells.

Science.gov (United States)

Mendel, J; Thust, R; Schwarz, H

1982-01-01

The alkylating activity, chemical stability in aqueous solution (pH 7.0; 37 degrees C), and partition coefficient (octanol/water) of the following compounds were determined: 1-methyl-3-phenyl-1-nitrosourea (MPNU), 1-ethyl-3-phenyl-1-nitrosourea (EPNU), 1-isopropyl-3-phenyl-1-nitrosourea (i-PrPNU), 1-methyl-3-(p-fluorophenyl)-1-nitrosourea (F-MPNU), 1-methyl-3-(p-chlorophenyl)-1-nitrosourea (Cl-MPNU), 1-methyl-3-(p-bromophenyl)-1-nitrosourea (Br-MPNU), 1,3-dimethyl-3-phenyl-1-nitrosourea (DMPNU), and 1-methyl-3-naphthyl-1-nitrosocarbamate (NCA). 1-Methyl-1-nitrosourea (MNU) and 1-ethyl-1-nitrosourea (ENU) were used for the comparison. THe rate of decomposition in aqueous solution is discussed concerning the influences of the substituents at the 1- and 3-N-atom. The mono- and disubstituted N-nitrosoureas showed a coarse correlation between alkylating activity and SCE induction in Chinese hamster V 79-E cells. On the other hand, this correlation is missing in the case of NCA, which is a potent SCE inducer despite relatively low alkylating activity. DMPNU is the strongest SCE inducer, but this compound shows a high stability in aqueous solution and, consequently, we were not able to detect an alkylating activity.

40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

Science.gov (United States)

2010-07-01

... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs P...

Enzymatic synthesis of S-phenyl-L-cysteine from keratin hydrolysis industries wastewater with tryptophan synthase.

Science.gov (United States)

Xu, Lisheng; Wang, Zhiyuan; Mao, Pingting; Liu, Junzhong; Zhang, Hongjuan; Liu, Qian; Jiao, Qing-Cai

2013-04-01

An economical method for production of S-phenyl-L-cysteine from keratin acid hydrolysis wastewater (KHW) containing L-serine was developed by recombinant tryptophan synthase. This study provides us with an alternative KHW utilization strategy to synthesize S-phenyl-L-cysteine. Tryptophan synthase could efficiently convert L-serine contained in KHW to S-phenyl-L-cysteine at pH 9.0, 40°C and Trion X-100 of 0.02%. In a scale up study, L-serine conversion rate reach 97.1% with a final S-phenyl-L-cysteine concentration of 38.6 g l(-1). Copyright © 2013 Elsevier Ltd. All rights reserved.

Fabrication and properties of poly(polyethylene glycol n-alkyl ether vinyl ether)s as polymeric phase change materials

International Nuclear Information System (INIS)

Pei, Dong-fang; Chen, Sai; Li, Shu-qin; Shi, Hai-feng; Li, Wei; Li, Xuan; Zhang, Xing-xiang

2016-01-01

A series of poly(polyethylene glycol n-alkyl ether vinyl ether)s (PC m E n VEs) with various lengths of alkyl chains and polyethylene glycol spacers as side chain (m = 16,18; n = 1,2) were synthesized via two steps. First, monomers-ethylene glycol hexadecyl ether vinyl ether (C 16 E 1 VE), ethylene glycol octadecyl ether vinyl ether (C 18 E 1 VE), diethylene glycol hexadecyl ether vinyl ether (C 16 E 2 VE) and diethylene glycol octadecyl ether vinyl ether (C 18 E 2 VE) were synthesized by a modified Williamson etherification. Then, four new types of phase change materials were successfully fabricated by a living cationic polymerization. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) were employed to characterize their composition, thermal properties and crystallization behavior. The results show that, the side chains of PC 16 E 1 VE, PC 18 E 1 VE, PC 16 E 2 VE and PC 18 E 2 VE are in a hexagonal lattice, and the onset temperatures for melting of PC 16 E 1 VE, PC 18 E 1 VE, PC 16 E 2 VE and PC 18 E 2 VE are 39.8 °C, 37.4 °C, 51.0 °C and 48.9 °C, the onset temperatures for crystallization are 36.7 °C, 35.2 °C, 47.4 °C and 46.3 °C, respectively. The enthalpy changes of PC 18 E 1 VE, PC 16 E 2 VE and PC 18 E 2 VE are higher than 100 J/g; on the contrary, it is 96 J/g for PC 16 E 1 VE. The enthalpy decrease is no more than 11% after 10 heating and cooling cycles. The 5 wt% mass loss temperatures of PC 18 E 1 VE, PC 16 E 2 VE and PC 18 E 2 VE are higher than 300 °C; on the contrary, it’s 283 °C for PC 16 E 1 VE. Using a weak polarity, flexible alkyl ether chain (-OCH 2 CH 2 O-) as a spacer to link the main chain and side chain is conducive to the crystallization of the alkyl side chain. These new phase change materials can be applied in heat storage, energy conservation, and environmental protection.

Adducts of uranium tetrachloride with neutral Schiff bases

Energy Technology Data Exchange (ETDEWEB)

Doretti, L; Madalosso, F; Sitran, S; Faleschini, S; Vigato, P A [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi

1977-01-01

Studies are reported of adducts of UCl/sub 4/ with various Schiff base ligands: N-(phenyl)benzalaldimine, N-(propyl) salicylaldimine, N-(phenyl) salicylaldimine, N-(2-hydroxyphenyl)benzalaldimine, N-(4-chlorophenyl)salcylaldimine, N-(4-nitrophenyl)salicylaldimine, N,N'-o-phenylenebis(salycylideneimine). The synthesis and characterization of these ligands is reported, and the preparation and characterization of the relative adducts of UCl/sub 4/: their IR spectra are reported and discussed.

Adducts of uranium tetrachloride with neutral Schiff bases

International Nuclear Information System (INIS)

Doretti, L.; Madalosso, F.; Sitran, S.; Faleschini, S.; Vigato, P.A.

1977-01-01

Studies are reported of adducts of UCl 4 with various Schiff base ligands: N-(phenyl)benzalaldimine, N-(propyl) salicylaldimine, N-(phenyl) salicylaldimine, N-(2-hydroxyphenyl)benzalaldimine, N-(4-chlorophenyl)salcylaldimine, N-(4-nitrophenyl)salicylaldimine, N,N'-o-phenylenebis (salycylideneimine). The synthesis and characterization of these ligands is reported, and the preparation and characterization of the relative adducts of UCl 4 : their IR spectra are reported and discussed. (author)

Covalent modification of calcium hydroxyapatite surface by grafting phenyl phosphonate moieties

International Nuclear Information System (INIS)

Aissa, Abdallah; Debbabi, Mongi; Gruselle, Michel; Thouvenot, Rene; Gredin, Patrick; Traksmaa, Rainer; Tonsuaadu, Kaia

2007-01-01

The reaction between phenyl phosphonic dichloride (C 6 H 5 P(O)Cl 2 ) and synthetic calcium hydroxy- and fluorapatite has been investigated. The presence of mono- or polymeric (C 6 H 5 PO) fragment bound to hydroxyapatite was evidenced by IR, and solid-state 31 P NMR spectroscopy. X-ray powder analysis has shown that the apatitic structure remains unchanged during the reaction. In contrast, no reaction was found using fluorapatite. According to the results found for these two different apatites a mechanism was proposed for the formation of covalent P-O-P bonds as the result of a reaction between the C 6 H 5 P(O)Cl 2 organic reagent and (HPO 4 ) - and/or OH - ions of the hydroxyapatite. - Graphical abstract: Representation of the first step of the reaction between the phenyl phosphonic dichloride and the hydroxyl groups on the surface of the apatite, leading to covalent P-O-P bond with elimination of HCl

Misconceptions about the ether

International Nuclear Information System (INIS)

Duffy, M.C.

1980-01-01

Several misconceptions concerning the ether concept and ether models are reviewed and clarified so that the relationship between modern ether theory and orthodox relativity may be better understood. The question of the ether's supposed superfluidity as a concept, and its status in modern physics remains to be answered. (author)

cis-Bis(O-methyl-dithio-carbonato-κ(2) S,S')bis-(tri-phenyl-phosphane-κP)ruthenium(II).

Science.gov (United States)

Valerio-Cárdenas, Cintya; Hernández-Ortega, Simón; Reyes-Martínez, Reyna; Morales-Morales, David

2013-01-01

In the title compound, [Ru(CH3OCS2)2(C18H15P)2], the Ru(II) atom is in a distorted octa-hedral coordination by two xanthate anions (CH3OCS2) and two tri-phenyl-phosphane (PPh3) ligands. Both bidentate xanthate ligands coordinate the Ru(II) atom with two slightly different Ru-S bond lengths but with virtually equal bite angles [71.57 (4) and 71.58 (3)°]. The packing of the complexes is assured by C-H⋯O and C-H⋯π inter-actions.

Complete separation of racemic p-boronophenylalanine by high performance liquid chromatography with crown ether-coated reversed-phase packings

International Nuclear Information System (INIS)

Yoshino, K.; Mieda, S.; Maruyama, T.; Mori, Y.; Mishima, Y.; Ichihashi, M.

1992-01-01

Since the L-form of p-boronophenylalanine (p-bpa) has been shown to be more efficiently incorporated into melanoma cells than racemic p-bpa separation of racemic p-bpa into its stereoisomers is an important subject. One of the preparative methods used to resolve racemic p-bpa involves the use of α-chymotrypsin. However, there has been a problem in that optical purity of resolved L- or D-p-bpa products was not easily determined. In this paper, the authors describe a method which can be used to confirm the optical purity of b-pba using high performance liquid chromatography (HPLC) with crown ether-coated reversed-phase packings

3-Substituted 2-phenyl-indoles

DEFF Research Database (Denmark)

Johansson, Karl Henrik; Jørgensen, T.B.; Gloriam, D.E.

2013-01-01

-indoles with a variety of substituents at the indole 3-position. Herein we describe the development of optimised and efficient synthetic routes to a series of new 2-phenyl-indole building blocks 3 to 9 and show that these can be used to generate a broad variety of 3-substituted 2-phenyl-indoles of interest to medicinal...

Synthesis of the DDT metabolite 2,4-dichloro-1-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene (o-Cl-DDMU) and its detection in abiotic and biotic samples.

Science.gov (United States)

Gallistl, Christoph; Proctor, Katie; Bader, Korinna; Vetter, Walter

2017-07-01

Technical dichlorodiphenyltrichloroethane (DDT) has been used worldwide as a pesticide since the beginning of the 1940s. Due to its persistence, DDT residues are still ubiquitously distributed in the environment. Photochemical UV degradation has been shown to be a potent degradation path for DDT and most of the resulting photoproducts have been identified up to now. Nevertheless, in 2012, a new DDT metabolite, most likely formed photochemically from DDE, was detected in ray liver samples from Brazil, an area which is highly contaminated with DDT. This study includes photochemical generation, chemical synthesis and isolation of this compound which was verified to consist of both cis- and trans-2,4-dichloro-1-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene. Both stereoisomers were resolved by gas chromatography on a polar capillary column and detected in more than 60 biotic (e.g. marine mammals, birds, human milk) and abiotic samples (fat deposits in kitchen hoods) from different areas all over the world. The stereoisomer distribution and concentrations (0.3-3.9% relative to corresponding 1,1-dichloro-2,2-bis(p-chlorophenyl) ethane (p,p'-DDE) levels) were determined by means of the synthesized analytical standard, indicating the widespread occurrence of this compound as an additional minor metabolite of DDT.

Scale‐up and intensification of (S)‐1‐(2‐chlorophenyl)ethanol bioproduction: Economic evaluation of whole cell‐catalyzed reduction of o‐Chloroacetophenone

DEFF Research Database (Denmark)

Eixelsberger, Thomas; Woodley, John; Nidetzky, Bernd

2013-01-01

Escherichia coli cells co‐expressing genes coding for Candida tenuis xylose reductase and Candida boidinii formate dehydrogenase were used for the bioreduction of o‐chloroacetophenone with in situ coenzyme recycling. The product, (S)‐1‐(2‐chlorophenyl)ethanol, is a key chiral intermediate...... in the synthesis of polo‐like kinase 1 inhibitors, a new class of chemotherapeutic drugs. Production of the alcohol in multi‐gram scale requires intensification and scale‐up of the biocatalyst production, biotransformation, and downstream processing. Cell cultivation in a 6.9‐L bioreactor led to a more than...... costs by 80% and enabled (S)‐1‐(2‐chlorophenyl)ethanol production within previously defined economic boundaries. A simple and efficient way to synthesize (S)‐1‐(2‐chlorophenyl)ethanol in an isolated amount of 20 g product per reaction batch was demonstrated. Biotechnol. Bioeng. 2013; 110: 2311...

Radiation initiated polymerisation of phenyl methacrylate

International Nuclear Information System (INIS)

Raghunath, S.; Rao, M.H.; Rao, K.N.

1983-01-01

Radiation initiated polymerisation of phenyl methacrylate has been studied at various dose rates and temperature. Predominant chain transfer to the monomer was observed and ksub(tran)/Ksub(p) the chain transfer constant ratio was found to be 4 x 10 -2 .ksub(p)/ksub(tsup(1/2)) value determined by the kinetic data and the molecular weight data were 0.0821 and 0.0198, respectively. IR studies of polymer at low conversion showed the presence of terminal unsaturation which disappeared at saturation conversion, thus showing its participation in the formation of a three dimensional network. (author)

Reproductive toxicity of the glycol ethers.

Science.gov (United States)

Hardin, B D

1983-06-01

The glycol ethers are an important and widely used class of solvents. Recent studies have demonstrated that ethylene glycol monomethyl ether (EGME), ethylene glycol dimethyl ether (EGdiME), ethylene glycol monoethyl ether (EGEE), and ethylene glycol monoethyl ether acetate (EGEEA) are teratogenic. Other studies have demonstrated that testicular atrophy or infertility follow treatment of males with EGME, ethylene glycol monomethyl ether acetate (EGMEA), EGEE, EGEEA, diethylene glycol dimethyl ether (diEGdiME), and diethylene glycol monoethyl ether (diEGEE). Experimental data are reviewed and structure-activity relationships are speculated upon.

Structural Elucidation of Z- and E- Isomers of 5-Alkyl-4-ethoxycarbonyl-5-(4`-chlorophenyl-3-oxa-4-pentenoic Acids

Directory of Open Access Journals (Sweden)

H. M. F. Madkour

2000-05-01

Full Text Available Z- and E-isomers of 5-alkyl-4-ethoxycarbonyl-5-(4`-chlorophenyl-3-oxa-4-pentenoic acids were prepared via the condensation of p-chloroacetophenone and/or pchloropropiophenone with diethyl-2,2`-oxydiacetate in the presence of sodium hydride as a basic catalyst. The Z-isomers of 2a and 2b were found to be predominant. The behaviour of the corresponding anhydrides towards the action of hydrazine, phenylhydrazine, primary aromatic amines, hydrocarbons and ethanolysis has also been investigated. The structures and configurations of the products have been elucidated by chemical and spectroscopic means.

Simple approach to thieno[3,2-d]pyrimidines as new scaffolds of antimicrobial activities

Directory of Open Access Journals (Sweden)

Hafez Hend N.

2016-09-01

Full Text Available 6ʹ-(4-Chlorophenyl-spiro[cyclohexane-1,2ʹ-thieno[3,2-d][1,3] oxazin]-4ʹ(1ʹH-one (1 was synthesized and used as a starting material for the synthesis of a novel series of spiro compounds having biologically active sulfonamide 2a-e and 3ʹ-(4-acetylphenyl-6ʹ- (4-chlorophenyl-1ʹH-spiro[cyclohexane-1,2ʹ-thieno[3,2-d] pyrimidine-4ʹ(3ʹH-one (3. Compound 2a was used as a key intermediate for the synthesis of sulfonyl carbothioamide derivatives 4a-c. Also, compound 3 was used as an intermediate for the synthesis of 3ʹH-spiro[cyclohexane-1,2ʹ-thieno[3,2-d]pyrimidin]-3ʹ-yl] phenyl}-2-imino-4-(substituted phenyl and/or thienyl-1,2-dihydropyridine- 3-carbonitrile derivatives 5a-e, 3ʹH-spiro[cyclohexane- 1,2ʹ- thieno[3,2-d]pyrimidin]-3ʹ-yl]phenyl}-2-oxo-4-(substituted phenyl and/or thienyl-1,2-dihydropyridine-3-carbonitrile derivatives 6a-e, and 4-[(2Z-3-substituted-arylprop-2-enoyl] phenyl-1ʹH-spiro[cyclohexane-1,2ʹ-thieno[3,2-d]pyrimidine derivatives 7a-e. Cyclocondensation of 7a-e with hydrazine hydrate produced 6ʹ-(4-chlorophenyl-3ʹ-[4-(5-substituted aryl-4,5-dihydro- 1H-pyrazol-3-ylphenyl]-1ʹH-spiro[cyclohexane-1,2ʹ-thieno- [3,2-d]pyrimidin]-4ʹ(3ʹH-ones 8a-e but with hydroxylamine hydrochloride afforded the corresponding isoxazoline derivatives 9a-e. Also, cyclocondensation by thiourea afforded 2-thioxo-1,2- dihydropyrimidin-4-yl-phenyl-spiro-{cyclohexanethieno[3,2-d] pyrimidin}-4-one derivatives 10a-e. The new compounds were investigated for antimicrobial activity. Compounds 2c, 8b,c, 9b and 10b were the most potent ones against both Gram-negative and Gram-positive bacteria. Compound 8c exhibited higher antifungal activity towards the examined fungi with MIC of 1-2 μmol mL-1 compared to ketoconazole (MIC 2-3 μmol mL-1 .

{2,6-Bis[(di-tert-butyl-phosphino)-methyl]-phenyl}chloridonickel(II).

Science.gov (United States)

Boro, Brian J; Dickie, Diane A; Goldberg, Karen I; Kemp, Richard A

2008-09-20

In the title compound, [Ni(C(24)H(43)P(2))Cl], the Ni atom adopts a distorted square-planar geometry, with the P atoms of the 2,6-bis-[(di-tert-butyl-phosphino)meth-yl]phenyl ligand trans to one another. The P-Ni-P plane is twisted out of the plane of the aromatic ring by 21.97 (6)°.

Analytical applications of N-phenyl-n-butyro hydroxamic and N-p-tolyl-n-butyro hydroxamic acids towards chromium (VI), copper (II), iron (III) and uranium (VI)

International Nuclear Information System (INIS)

Elkhadir, A. Y. F.

2001-05-01

Two aliphatic hydroxamic acids were prepared; N-phenyl-n-butyro hydroxamic acid and N-p-tolyl-n-butyro hydroxamic acid, by the reaction of β-phenylhydroxylamine and p-tolyl hydroxylamine with n-butyryl chloride. The acids were identified by: their melting points, characteristic reactions with acidic solutions of vanadium (V) and iron (III), infrared spectroscopy, nitrogen content and molecular weight determination. The extractability of these acids towards Cr (VI), Cu (II), Fe (III) and U (VI) were investigated at different pH values and molar acid concentrations. N-phenyl-n- butyro hydroxamic acid has a maximum extraction (98.80%) for Cr (VI) at 4 M H 2 SO 4 , (83.25%) for Cu (II) at pH 6, (99.17%) for Fe (III) at pH 5 and (99.76%) at 4 M HNO 3 for U (VI) respectively. N-p-tolyl-n-butyro hydroxamic acid has a maximum extraction (98.40%) for Cr (VI)at 4 M H 2 SO 4 , (81.30%) for Cu (II) at pH 6, (92.80%) for Fe (III) at pH 5 and (99.64%) for U (VI) at 4 M HNO 3 , respectively. The ratios of the metal to ligands were determined by job method (continuous variation method) and were found to be 1:2 for Cr (VI) and U (VI). (Author)

Analytical applications of N-phenyl-n-butyro hydroxamic and N-p-tolyl-n-butyro hydroxamic acids towards chromium (VI), copper (II), iron (III) and uranium (VI)

Energy Technology Data Exchange (ETDEWEB)

Elkhadir, A Y. F. [Department of Chemistry, Faculty of Science, University of Khartoum, Khartoum (Sudan)

2001-05-01

Two aliphatic hydroxamic acids were prepared; N-phenyl-n-butyro hydroxamic acid and N-p-tolyl-n-butyro hydroxamic acid, by the reaction of {beta}-phenylhydroxylamine and p-tolyl hydroxylamine with n-butyryl chloride. The acids were identified by: their melting points, characteristic reactions with acidic solutions of vanadium (V) and iron (III), infrared spectroscopy, nitrogen content and molecular weight determination. The extractability of these acids towards Cr (VI), Cu (II), Fe (III) and U (VI) were investigated at different pH values and molar acid concentrations. N-phenyl-n- butyro hydroxamic acid has a maximum extraction (98.80%) for Cr (VI) at 4 M H{sub 2}SO{sub 4}, (83.25%) for Cu (II) at pH 6, (99.17%) for Fe (III) at pH 5 and (99.76%) at 4 M HNO{sub 3} for U (VI) respectively. N-p-tolyl-n-butyro hydroxamic acid has a maximum extraction (98.40%) for Cr (VI)at 4 M H{sub 2} SO{sub 4}, (81.30%) for Cu (II) at pH 6, (92.80%) for Fe (III) at pH 5 and (99.64%) for U (VI) at 4 M HNO{sub 3}, respectively. The ratios of the metal to ligands were determined by job method (continuous variation method) and were found to be 1:2 for Cr (VI) and U (VI). (Author)

(Z-Ethyl 3-(4-chlorophenyl-2-cyano-3-(2,6-difluorobenzamidoacrylate

Directory of Open Access Journals (Sweden)

Zhang Xiaoyan

2008-12-01

Full Text Available The title compound, C19H13ClF2N2O3, was prepared by the reaction of (Z-ethyl 3-amino-3-(4-chlorophenyl-2-cyanoacrylate and 2,6-difluorobenzoyl chloride. The dihedral angle between the chlorobenzene and fluorobenzene rings is 37.0 (1°. The ethyl group is disordered over two positions [occupancies = 0.52 (2:0.48 (2]. In addition to intramolecular N—H...O and N—H...F hydrogen bonds, the crystal packing shows the molecules to be connected by intermolecular C—H...O and C—H...N hydrogen bonds.

A Comparative Study of the Inclusion Complexes of 2-[5'-benzylidene-2'-phenyl-4'-oxo-1', 3'-thiazolidine]-1, 3-benzothiazole and 2-[5'-(p-N,N-dimethylamino- benzylidene-2'-phenyl-4'-oxo-1', 3'-thiazolidine]-1, 3-benzothiazole withβ-Cyclodextrin

Directory of Open Access Journals (Sweden)

S. Panda

2011-01-01

Full Text Available The compounds 2-[5'-benzylidene-2'-phenyl-4'-oxo-1', 3'-thiazolidine]-1, 3-benzothiazole and 2-[5'-(p-N,N-dimethylamino- benzylidene-2'-phenyl-4'-oxo-1', 3'-thiazolidine]-1, 3-benzothiazole have been synthesized in their purest forms starting from 2-aminobenzothiazole. The inclusion complexes of the above compounds have been prepared with β-cyclodextrin to increase their solubility and bioaccessibility in polar medium. The formation of inclusion complexes have been ascertained by study of spectral characteristic before and after inclusion complex formation. The stability of inclusion complexes and nature of interaction between the host and guest are known from the determination of thermodynamic parameters. Further the antibacterial and antifungal activities of the compounds are determined which is found to increase significantly after inclusion complex formation

Metabolism of (phenyl-U-14C)-parathion and its metabolite p-nitrophenol in the rat

International Nuclear Information System (INIS)

Schmidt-Sonnenschein, B.

1977-08-01

(Phenyl-U- 14 C)-parathion was orally given to rats in doses of 2.7 or 3.5 mg per kg body weight. Within 24 h, more than 95 % of the dose applied had left the body renally and about 7 % faecally. Resorption of the agent started early. Most of it was resorbed between 2 and 4 h after application. 2 h after application, there were still 85 % 14 C residues in the gastrointestinal tract, but only about 10 % was left 8 h later. Radioactivity contents in the blood and the internal organs, on the other hand, never exceeded 1 % of the applied dose. With radioactivity displacement into deeper intestinal sections, the fraction of water-soluble metabolites increased from about 1-3 % in the stomach to about 60 % in the large intestine. Using thin film chromatography and autoradiography, the following compounds were detected in the urine and tissues: The initial agent parathion, its oxidation product paraoxon and the hydrolysis product p-nitrophenol as organic-soluble compounds, and deethyl-paraoxon, p-nitrophenyl glucuronide and p-nitrophenyl sulphate as water-soluble metabolites. In urine, 65-80% of the radioactivity content was represented by a substance which may be the sulphate ester of p-nitrophenol. A total of 58 % of the applied dose was excreted in the form of this metabolite within 8 h. (orig./MG) [de

1,1-Bis(3'-indolyl)-1-(p-substituted phenyl)methanes induce autophagic cell death in estrogen receptor negative breast cancer

International Nuclear Information System (INIS)

Vanderlaag, Kathy; Su, Yunpeng; Frankel, Arthur E; Burghardt, Robert C; Barhoumi, Rola; Chadalapaka, Gayathri; Jutooru, Indira; Safe, Stephen

2010-01-01

A novel series of methylene-substituted DIMs (C-DIMs), namely 1,1-bis(3'-indolyl)-1-(p-substituted phenyl)methanes containing t-butyl (DIM-C-pPhtBu) and phenyl (DIM-C-pPhC6H5) groups inhibit proliferation of invasive estrogen receptor-negative MDA-MB-231 and MDA-MB-453 human breast cancer cell lines with IC50 values between 1-5 uM. The main purpose of this study was to investigate the pathways of C-DIM-induced cell death. The effects of the C-DIMs on apoptotic, necrotic and autophagic cell death were determined using caspase inhibitors, measurement of lactate dehydrogenase release, and several markers of autophagy including Beclin and light chain associated protein 3 expression (LC3). The C-DIM compounds did not induce apoptosis and only DIM-C-pPhCF 3 exhibited necrotic effects. However, treatment of MDA-MB-231 and MDA-MB-453 cells with C-DIMs resulted in accumulation of LC3-II compared to LC3-I protein, a characteristic marker of autophagy, and transient transfection of green fluorescent protein-LC3 also revealed that treatment with C-DIMs induced a redistribution of LC3 to autophagosomes after C-DIM treatment. In addition, the autofluorescent drug monodansylcadaverine (MDC), a specific autophagolysosome marker, accumulated in vacuoles after C-DIM treatment, and western blot analysis of lysates from cells treated with C-DIMs showed that the Beclin 1/Bcl-2 protein ratio increased. The results suggest that C-DIM compounds may represent a new mechanism-based agent for treating drug-resistant ER-negative breast tumors through induction of autophagy

Influencing the electronic interaction in diferrocenyl-1-phenyl-1H-pyrroles.

Science.gov (United States)

Hildebrandt, Alexander; Lang, Heinrich

2011-11-28

Functionalised diferrocenyl-1-phenyl-1H-pyrroles were synthesised using Negishi C,C cross-coupling reactions. The influence of different substituents at the phenyl moiety on the electronic interaction was studied using electrochemistry (cyclic and square-wave voltammetry) and spectro-electrochemistry (in situ UV/Vis-NIR spectroscopy). The ferrocenyl moieties gave rise to two sequential, reversible redox processes in each of the diferrocenyl-1-phenyl-1H-pyrroles. The observed ΔE(1/2) values (ΔE(1/2) = difference between first and second oxidation) range between 420 and 480 mV. A linear relationship between the Hammett constants σ of the substituents and the separation of the redox potentials exists. The NIR measurements confirm electronic communication between the iron centers as intervalence charge transfer (IVCT) absorptions were observed in the corresponding mixed-valent monocationic species. All compounds were classified as class II systems according to Robin and Day (M. B. Robin and P. Day, Adv. Inorg. Chem., 1967, 10, 247-423). The oscillator strength of the charge transfer transition highly depends on the electron donating or electron withdrawing character of the phenyl substituents. This enables direct tuning of the intermetallic communication by simple modification of the molecule's functional group. Hence, this series of molecules may be regarded as model compounds for single molecule transistors.

(Z-3-(4-Chlorophenyl-1-(2,4-difluorophenyl-2-(1H-1,2,4-triazol-1-ylprop-2-en-1-one

Directory of Open Access Journals (Sweden)

Xin-Mei Peng

2012-06-01

Full Text Available The asymmetric unit of the title compound, C17H10ClF2N3O, contains three independent molecules. In each molecule, the C=C bond has a cis conformation with respect to the triazole and chlorophenyl groups. The dihedral angles formed by the triazole ring with the diflurophenyl and chlorophenyl benzene rings, respectively, are 20.10 (14 and 73.22 (15, 25.31 (15 and 84.44 (15, and 16.44 (13 and 61.72 (14° in the three molecules while the dihedral angles between the benzene rings are 66.54 (13, 85.82 (12 and 58.37 (12°.

Effect of ethylene glycol monomethyl ether and diethylene glycol monomethyl ether on hepatic metabolizing enzymes.

Science.gov (United States)

Kawamoto, T; Matsuno, K; Kayama, F; Hirai, M; Arashidani, K; Yoshikawa, M; Kodama, Y

1990-06-01

Glycol ethers have been extensively used in industry over the past 40-50 years. Numerous studies on the toxicity of glycol ethers have been performed, however, the effects of glycol ethers on the hepatic drug metabolizing enzymes are still unknown. We studied the changes of the putative metabolic enzymes, that is, the hepatic microsomal mixed function oxidase system and cytosolic alcohol dehydrogenase, by the oral administration of diEGME and EGME. Adult male Wistar rats were used. DiEGME was administered orally; 500, 1000, 2000 mg/kg for 1, 2, 5 or 20 days and EGME was 100, 300 mg/kg for 1, 2, 5 or 20 days. Decreases in liver weights were produced by highest doses of diEGME (2000 mg/kg body wt/day for 20 days) and EGME (300 mg/kg body wt/day for 20 days). DiEGME increased hepatic microsomal protein contents and induced cytochrome P-450, but not cytochrome b5 or NADPH-cytochrome c reductase. The activity of cytosolic ADH was not affected by diEGME administration. On the other hand, EGME did not change cytochrome P-450, cytochrome b5 or NADPH-cytochrome c reductase. The activity of cytosolic ADH was increased by repeated EGME treatment. Therefore it is suspected that the enzyme which takes part in the metabolism of diEGME is different from that of EGME, although diEGME is a structural homologue of EGME.

Novel para-phenyl substituted diindolylmethanes protect against MPTP neurotoxicity and suppress glial activation in a mouse model of Parkinson's disease.

Science.gov (United States)

De Miranda, Briana R; Popichak, Katriana A; Hammond, Sean L; Miller, James A; Safe, Stephen; Tjalkens, Ronald B

2015-02-01

The orphan nuclear receptor NR4A2 (Nurr1) constitutively regulates inflammatory gene expression in glial cells by suppressing DNA binding activity of NF-κB. We recently reported that novel 1,1-bis(3'-indolyl)-1-(p-substitutedphenyl)methane (C-DIM) compounds that activate NR4A family nuclear receptors in cancer lines also suppress inflammatory gene expression in primary astrocytes and prevent loss of dopaminergic neurons in mice exposed to 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine and probenecid (MPTPp). In this study, we postulated that the basis for this neuroprotection involves blockade of glial activation and subsequent expression of NF-κB-regulated inflammatory genes. To examine this mechanism, we treated transgenic NF-κB/EGFP reporter mice with MPTPp for 7 days (MPTPp7d) followed by daily oral gavage with either vehicle (corn oil; MPTPp14d) or C-DIMs containing p-methoxyphenyl (C-DIM5), p-hydroxyphenyl (C-DIM8), or p-chlorophenyl (C-DIM12) groups. Each compound conferred significant protection against progressive loss of dopaminergic neurons in the substantia nigra pars compacta (SNpc), even when given after 7 days of dosing with MPTPp. C-DIM12 had the greatest neuroprotective activity in MPTPp-treated mice, and was also the most potent compound in suppressing activation of microglia and astrocytes, expression of cytokines and chemokines in quantitative polymerase chain reaction (qPCR) array studies, and in reducing expression of NF-κB/EGFP in the SN. C-DIM12 prevented nuclear export of Nurr1 in dopaminergic neurons and enhanced expression of the Nurr1-regulated proteins tyrosine hydroxylase and the dopamine transporter. These data indicate that NR4A-active C-DIM compounds protect against loss of dopamine neurons in the MPTPp model of PD by preventing glial-mediated neuronal injury and by supporting a dopaminergic phenotype in TH-positive neurons in the SNpc. © The Author 2014. Published by Oxford University Press on behalf of the Society of Toxicology

Exogenous ether lipids predominantly target mitochondria.

Directory of Open Access Journals (Sweden)

Lars Kuerschner

Full Text Available Ether lipids are ubiquitous constituents of cellular membranes with no discrete cell biological function assigned yet. Using fluorescent polyene-ether lipids we analyzed their intracellular distribution in living cells by microscopy. Mitochondria and the endoplasmic reticulum accumulated high amounts of ether-phosphatidylcholine and ether-phosphatidylethanolamine. Both lipids were specifically labeled using the corresponding lyso-ether lipids, which we established as supreme precursors for lipid tagging. Polyfosine, a fluorescent analogue of the anti-neoplastic ether lipid edelfosine, accumulated to mitochondria and induced morphological changes and cellular apoptosis. These data indicate that edelfosine could exert its pro-apoptotic power by targeting and damaging mitochondria and thereby inducing cellular apoptosis. In general, this study implies an important role of mitochondria in ether lipid metabolism and intracellular ether lipid trafficking.

Ether formulations of relativity

International Nuclear Information System (INIS)

Duffy, M.C.

1980-01-01

Contemporary ether theories are surveyed and criticised, especially those formally identical to orthodox Relativity. The historical development of Relativity, Special and General, in terms of an ether, is briefly indicated. Classical interpretations of Generalized Relativity using ether are compared to Euclidean formulations using a background space. The history of a sub-group of theories, formulating a 'new' Relativity involving modified transforms, is outlined. According to the theory with which they agree, recent supposed detections of drift are classified and criticised. Cosmological evidence suggesting an ether is mentioned. Only ether theories formally identical to Relativity have been published in depth. They stand criticised as being contrary to the positivist spirit. The history of mechanical analogues is traced, from Hartley's representing gravitating matter as spherical standing waves, to recent suggestions that vortex-sponge might model electromagnetic, quantum, uncertainty and faster-than-light phenomena. Contemporary theories are particular physical theories, themselves 'second interpretations' of a primary mathematical model. Mechanical analogues are auxiliary, not necessary, to other theory, disclosing relationships between classical and non-classical descriptions of assemblies charging state. The ether-relativity polemic, part of a broader dispute about relativity, is founded on mistaken conceptions of the roles of mathematical and physical models, mechanical analogues; and a distored view of history, which indicates that ether theories have become relativistic. (author)

Synthesis and crystal structures of 2-methyl-4-aryl-5-oxo-5H-indeno [1,2-b] pyridine carboxylate derivatives

DEFF Research Database (Denmark)

Pandian, Ramesh; Naushad, Edayadulla; Vijayakumar, Vinodhkumar

2014-01-01

pyridine derivatives through oxidation. Consequently, the interest in this aromatization reaction, investigation of a wide range of 1, 4-DHPs continues to attract the attention of researchers. Herein, we report the preparation of pyridine derivatives and the crystal structures determined by X......-ray crystallographic methods.Results: The crystal structures and conformational studies of two organic compounds, namely ethyl 2-methyl-4-phenyl-5-oxo-5H-indeno [1,2-b] pyridine-3-carboxylate (I) and ethyl 2-methyl-4-(4 chlorophenyl)-5-oxo-5H-indeno [1,2-b] pyridine-3-carboxylate (II) are reported. The terminal ethyl......) dimer running along 011 direction.Conclusion: The crystal structures ethyl 2-methyl-4-phenyl-5-oxo-5H-indeno [1,2-b] pyridine-3-carboxylate and ethyl 2-methyl-4-(4 chlorophenyl)-5-oxo-5H-indeno [1,2-b] pyridine-3-carboxylate have been investigated in detail. The terminal ethyl group of compound I...

Thermodynamics of Hydrogen Production from Dimethyl Ether Steam Reforming and Hydrolysis

Energy Technology Data Exchange (ETDEWEB)

T.A. Semelsberger

2004-10-01

The thermodynamic analyses of producing a hydrogen-rich fuel-cell feed from the process of dimethyl ether (DME) steam reforming were investigated as a function of steam-to-carbon ratio (0-4), temperature (100 C-600 C), pressure (1-5 atm), and product species: acetylene, ethanol, methanol, ethylene, methyl-ethyl ether, formaldehyde, formic acid, acetone, n-propanol, ethane and isopropyl alcohol. Results of the thermodynamic processing of dimethyl ether with steam indicate the complete conversion of dimethyl ether to hydrogen, carbon monoxide and carbon dioxide for temperatures greater than 200 C and steam-to-carbon ratios greater than 1.25 at atmospheric pressure (P = 1 atm). Increasing the operating pressure was observed to shift the equilibrium toward the reactants; increasing the pressure from 1 atm to 5 atm decreased the conversion of dimethyl ether from 99.5% to 76.2%. The order of thermodynamically stable products in decreasing mole fraction was methane, ethane, isopropyl alcohol, acetone, n-propanol, ethylene, ethanol, methyl-ethyl ether and methanol--formaldehyde, formic acid, and acetylene were not observed. The optimal processing conditions for dimethyl ether steam reforming occurred at a steam-to-carbon ratio of 1.5, a pressure of 1 atm, and a temperature of 200 C. Modeling the thermodynamics of dimethyl ether hydrolysis (with methanol as the only product considered), the equilibrium conversion of dimethyl ether is limited. The equilibrium conversion was observed to increase with temperature and steam-to-carbon ratio, resulting in a maximum dimethyl ether conversion of approximately 68% at a steam-to-carbon ratio of 4.5 and a processing temperature of 600 C. Thermodynamically, dimethyl ether processed with steam can produce hydrogen-rich fuel-cell feeds--with hydrogen concentrations exceeding 70%. This substantiates dimethyl ether as a viable source of hydrogen for PEM fuel cells.

Nickel-catalyzed direct synthesis of dialkoxymethane ethers

Indian Academy of Sciences (India)

MURUGAN SUBARAMANIAN

Nickel catalysis; alcohol; paraformaldehyde; ether; solvent-free condition. 1. Introduction ..... oxidation and Dopamine Release with Protective Effects. Against Central ... P, Ghosh A, Saha R and Saha B 2016 A Review on the. Advancement of ...

Synthesis of 2-phenyl- and 2,3-diphenyl-quinolin-4-carboxylic acid derivatives

International Nuclear Information System (INIS)

Elhadi, S. A.

2004-09-01

Quinolin derivatives are a group of compounds known to possess a wide range of biological activities. The chemistry of quinolines together with their corresponding aldehydes were dealt with in chapter one of this study. Special emphasis was given to the chemistry of benzaldehyde. Twenty five 2-phenyl- and 2,3-diphenyl-quinolin-4-carboxylic acid derivatives together with their corresponding intermediates were prepared in this work. Basically, the synthetic design of these compounds arise from the appropriate disconnections of the target 2-phenyl and 2,3-diphenyl-quinolin-4-carboxylic acids. The retro synthesis analysis of these compounds reveals pyruvic acid, aromatic amine and benzaldehyde or phenyl pyruvic acid, aromatic amine and benzaldehyde as possible logical precursors for 2-phenyl-and 2,3-diphenyl- quinoline-4-carboxylic acids respectively. The purity and identities of the synthesized compounds were elucidated through chromatographic and spectroscopic techniques. The compounds were heavily subjected to spectroscopic analysis (UV, IR, GC/MS, 1 H-and 13 C- NMR). The appropriate disconnections and the mechanisms of the corresponding reactions were given and discussed in chapter three. The spectral data were interpreted and correlated with the target structures. The prepared 2-phenyl- and 2,3-diphenyl-quinoline-4-carboxylic acid derivatives were screened for their antibacterial activity. The compounds were tested against the standard bacterial organisms B. subtilis, S. aureus, E. coli and P. vulgaris. Some of these compounds were devoid of antibacterial activity against S. aureus and P. vulgaris, while others showed moderate activity. All of the tested compounds showed an activity against B. subtilis and E. coli. 2,3-diphenyl -6-sulphanilamide-quinolin-4-carboxylic acid showed the highest activity against the four standard tested organisms.(Author)

Synthesis of 2-phenyl- and 2,3-diphenyl-quinolin-4-carboxylic acid derivatives

Energy Technology Data Exchange (ETDEWEB)

Elhadi, S A [Department of Chemistry, Faculty of Education, University of Khartoum, Khartoum (Sudan)

2004-09-01

Quinolin derivatives are a group of compounds known to possess a wide range of biological activities. The chemistry of quinolines together with their corresponding aldehydes were dealt with in chapter one of this study. Special emphasis was given to the chemistry of benzaldehyde. Twenty five 2-phenyl- and 2,3-diphenyl-quinolin-4-carboxylic acid derivatives together with their corresponding intermediates were prepared in this work. Basically, the synthetic design of these compounds arise from the appropriate disconnections of the target 2-phenyl and 2,3-diphenyl-quinolin-4-carboxylic acids. The retro synthesis analysis of these compounds reveals pyruvic acid, aromatic amine and benzaldehyde or phenyl pyruvic acid, aromatic amine and benzaldehyde as possible logical precursors for 2-phenyl-and 2,3-diphenyl- quinoline-4-carboxylic acids respectively. The purity and identities of the synthesized compounds were elucidated through chromatographic and spectroscopic techniques. The compounds were heavily subjected to spectroscopic analysis (UV, IR, GC/MS, {sup 1}H-and {sup 13}C- NMR). The appropriate disconnections and the mechanisms of the corresponding reactions were given and discussed in chapter three. The spectral data were interpreted and correlated with the target structures. The prepared 2-phenyl- and 2,3-diphenyl-quinoline-4-carboxylic acid derivatives were screened for their antibacterial activity. The compounds were tested against the standard bacterial organisms B. subtilis, S. aureus, E. coli and P. vulgaris. Some of these compounds were devoid of antibacterial activity against S. aureus and P. vulgaris, while others showed moderate activity. All of the tested compounds showed an activity against B. subtilis and E. coli. 2,3-diphenyl -6-sulphanilamide-quinolin-4-carboxylic acid showed the highest activity against the four standard tested organisms.(Author)

Fuel cell performance of pendent methylphenyl sulfonated poly(ether ether ketone ketone)s

Science.gov (United States)

Zhang, Hanyu; Stanis, Ronald J.; Song, Yang; Hu, Wei; Cornelius, Chris J.; Shi, Qiang; Liu, Baijun; Guiver, Michael D.

2017-11-01

Meta- and para-linked homopolymers bearing 3-methylphenyl (Me) pendent groups were postsulfonated to create sulfonated poly(ether ether ketone ketone) (SPEEKK) backbone isomers, which are referred to as Me-p-SPEEKK and Me-m-SPEEKK. Their thermal and oxidative stability, mechanical properties, dimensional stability, methanol permeability, and proton conductivity are characterized. Me-p-SPEEKK and Me-m-SPEEKK proton conductivities at 100 °C are 116 and 173 mS cm-1, respectively. Their methanol permeabilities are 3.3-3.9 × 10-7 cm2 s-1, and dimensional swelling at 100 °C is 16.4-17.5%. Me-p-SPEEKK and Me-m-SPEEKK were fabricated into membrane electrode assemblies (MEAs), and electrochemical properties were evaluated within a direct methanol fuel cell (DMFC) and proton-exchange membrane fuel cell (PEMFC). When O2 is used as the oxidant at 80 °C and 100% RH, the maximum power density of Me-m-SPEEKK reaches 657 mW cm-2, which is higher than those of Nafion 115 (552 mW cm-2). DMFC performance is 85 mW cm-2 at 80 °C with 2.0 M methanol using Me-p-SPEEKK due to its low MeOH crossover. In general, these electrochemical results are comparable to Nafion. These ionomer properties, combined with a potentially less expensive and scalable polymer manufacturing process, may broaden their potential for many practical applications.

Isolation of novel para-pentyl phenyl benzoate from Mondia whitei ...

African Journals Online (AJOL)

Results: The structure of the compound was elucidated as para pentyl phenyl benzoate. The neuropharmacological evaluation of the compound indicated significant (p<0.05) depression of the central nervous system. The binding characteristics of the compound to gamma amino butyric acid A receptors appears to be more ...

Direct transformation of silyl enol ethers into functionalized allenes.

Science.gov (United States)

Langer, P; Döring, M; Seyferth, D; Görls, H

2001-02-02

The first elimination reactions of silyl enol ethers to lithiated allenes are reported. These reactions allow a direct transformation of readily available silyl enol ethers into functionalized allenes. The action of three to four equivalents of lithium diisopropylamide (LDA) on silyl enol ethers results in the formation of lithiated allenes by initial allylic lithiation, subsequent elimination of a lithium silanolate, and finally, lithiation of the allene thus formed. Starting with amide-derived silyl imino ethers, lithiated ketenimines are obtained. A variety of reactions of the lithiated allenes with electrophiles (chlorosilanes, trimethylchlorostannane, dimethyl sulfate and ethanol) were carried out. Elimination of silanolate is observed only for substrates that contain the hindered SiMe2tBu or Si(iPr)3 moiety, but not for the SiMe3 group. The reaction of 1,1-dilithio-3,3-diphenylallene with ketones provides a convenient access to novel 1,1-di(hydroxymethyl)allenes which undergo a domino Nazarov-Friedel-Crafts reaction upon treatment with p-toluenesulfonic acid.

Palladium-Catalyzed ortho-Olefination of Phenyl Acetic and Phenyl Propylacetic Esters via C-H Bond Activation.

Science.gov (United States)

Hu, Jundie; Guan, Mingyu; Han, Jian; Huang, Zhi-Bin; Shi, Da-Qing; Zhao, Yingsheng

2015-08-21

A highly regioselective palladium-catalyzed ester-directed ortho-olefination of phenyl acetic and propionic esters with olefins via C-H bond activation has been developed. A wide variety of phenyl acetic and propionic esters were tolerated in this transformation, affording the corresponding olefinated aromatic compounds. The ortho-olefination of heterocyclic acetic and propionic esters also took place smoothly giving the products in good yields, thus proving the potential utility of this protocol in synthetic chemistry.

Reactions of phenols and alcohols over thoria: mechanism of ether formation

International Nuclear Information System (INIS)

Karuppannasamy, S.; Narayanan, K.; Pillai, C.N.

1980-01-01

The dehydration of phenols and alkylation of phenols by alcohols over thoria were studied at 400 to 500 0 C and atmospheric pressure. Phenol and cresols, when dehydrated gave diaryl ethers as main products. With para-substituted phenols such as p-methoxy, p-t-butyl, p-chloro, and p-nitrophenol no ether formation was noticed. All the reactions were accompanied by considerable amount of coke formation. Alkylation of phenols by alcohols gave a mixture of O- and C-alkylated products under the same reaction conditions. O-alkylation and C-alkylation are parallel reactions. The mechanistic aspects of the reactions are discussed. 3 figures, 3 tables

Zebrafish seizure model identifies p,p -DDE as the dominant contaminant of fetal California sea lions that accounts for synergistic activity with domoic acid.

Science.gov (United States)

Tiedeken, Jessica A; Ramsdell, John S

2010-04-01

Fetal poisoning of California sea lions (CSLs; Zalophus californianus) has been associated with exposure to the algal toxin domoic acid. These same sea lions accumulate a mixture of persistent environmental contaminants including pesticides and industrial products such as polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Developmental exposure to the pesticide dichlorodiphenyltrichloroethane (DDT) and its stable metabolite 1,1-bis-(4-chlorophenyl)-2,2-dichloroethene (p,p -DDE) has been shown to enhance domoic acid-induced seizures in zebrafish; however, the contribution of other co-occurring contaminants is unknown. We formulated a mixture of contaminants to include PCBs, PBDEs, hexachlorocyclohexane (HCH), and chlordane at levels matching those reported for fetal CSL blubber to determine the impact of co-occurring persistent contaminants with p,p -DDE on chemically induced seizures in zebrafish as a model for the CSLs. Embryos were exposed (6-30 hr postfertilization) to p,p -DDE in the presence or absence of a defined contaminant mixture prior to neurodevelopment via either bath exposure or embryo yolk sac microinjection. After brain maturation (7 days postfertilization), fish were exposed to a chemical convulsant, either pentylenetetrazole or domoic acid; resulting seizure behavior was then monitored and analyzed for changes, using cameras and behavioral tracking software. Induced seizure behavior did not differ significantly between subjects with embryonic exposure to a contaminant mixture and those exposed to p,p -DDE only. These studies demonstrate that p,p -DDE--in the absence of PCBs, HCH, chlordane, and PBDEs that co-occur in fetal sea lions--accounts for the synergistic activity that leads to greater sensitivity to domoic acid seizures.

Spontaneous Generation of Chirality in Simple Diaryl Ethers.

Science.gov (United States)

Lennartson, Anders; Hedström, Anna; Håkansson, Mikael

2015-07-01

We studied the spontaneous formation of chiral crystals of four diaryl ethers, 3-phenoxybenzaldehyde, 1; 1,3-dimethyl-2-phenoxybenzene, 2; di(4-aminophenyl) ether, 3; and di(p-tolyl) ether, 4. Compounds 1, 3, and 4 form conformationally chiral molecules in the solid state, while the chirality of 2 arises from the formation of supramolecular helices. Compound 1 is a liquid at ambient temperature, but 2-4 are crystalline, and solid-state CD-spectroscopy showed that they could be obtained as optically active bulk samples. It should be noted that the optical activity arise upon crystallization, and no optically active precursors were used. Indeed, even commercial samples of 3 and 4 were found to be optically active, giving evidence for the ease at which total spontaneous resolution may occur in certain systems. © 2015 Wiley Periodicals, Inc.

Synthesis and structure-activity relationship exploration of some potent anti-cancer phenyl amidrazone derivatives.

Science.gov (United States)

Habashneh, Almeqdad Y; El-Abadelah, Mustafa M; Bardaweel, Sanaa K; Taha, Mutasem O

2017-12-04

Amidrazones have been reported to have significant anti-tumor properties against several cancer cell lines. The current project aims to profile the structure-anticancer activity relationship of phenyl-amidrazons. Fifteen phenyl-amidrazone-piperazine derivatives were prepared and tested against four cancer cell lines (leukemia, prostate, breast and colon cancers). Six compounds illustrated low micromolar anticancer IC50 values, while the remaining compounds were either inactive or of moderate potencies. All compounds were virtually nontoxic against normal fibroblast cells. Docking into the oncogenic kinase bcr/abl illustrated the critical importance of (i) p-halogen substituent on the ligand's phenyl ring and (ii) the presence of positive ionizable moiety at the ligand's piperazine fragment for anticancer activity. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Anaerobic transformation of DDT related to iron(III) reduction and microbial community structure in paddy soils.

Science.gov (United States)

Chen, Manjia; Cao, Fang; Li, Fangbai; Liu, Chengshuai; Tong, Hui; Wu, Weijian; Hu, Min

2013-03-06

We studied the mechanisms of microbial transformation in functional bacteria on 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) in two different field soils, Haiyan (HY) and Chenghai (CH). The results showed that microbial activities had a steady dechlorination effect on DDT and its metabolites (DDx). Adding lactate or glucose as carbon sources increased the amount of Desulfuromonas, Sedimentibacter, and Clostridium bacteria, which led to an increase in adsorbed Fe(II) and resulted in increased DDT transformation rates. The electron shuttle of anthraquinone-2,6-disulfonic disodium salt resulted in an increase in the negative potential of soil by mediating the electron transfer from the bacteria to the DDT. Moreover, the DDT-degrading bacteria in the CH soil were more abundant than those in the HY soil, which led to higher DDT transformation rates in the CH soil. The most stable compound of DDx was 1,1-dichloro-2,2-bis(p-chloro-phenyl)ethane, which also was the major dechlorination metabolite of DDT, and 1-chloro-2,2-bis-(p-chlorophenyl)ethane and 4,4'-dichlorobenzo-phenone were found to be the terminal metabolites in the anaerobic soils.

In Vitro Effects of the Endocrine Disruptor p,p’-DDT on Human Follitropin Receptor

Science.gov (United States)

Munier, Mathilde; Grouleff, Julie; Gourdin, Louis; Fauchard, Mathilde; Chantreau, Vanessa; Henrion, Daniel; Coutant, Régis; Schiøtt, Birgit; Chabbert, Marie; Rodien, Patrice

2016-01-01

Background: 1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene (p,p′-DDT) is a persistent environmental endocrine disruptor (ED). Several studies have shown an association between p,p′-DDT exposure and reproductive abnormalities. Objectives: To investigate the putative effects of p,p′-DDT on the human follitropin receptor (FSHR) function. Methods and Results: We used Chinese hamster ovary (CHO) cells stably expressing human FSHR to investigate the impact of p,p′-DDT on FSHR activity and its interaction with the receptor. At a concentration of 5 μM p,p′-DDT increased the maximum response of the FSHR to follitropin by 32 ± 7.45%. However, 5 μM p,p′-DDT decreased the basal activity and did not influence the maximal response of the closely related LH/hCG receptor to human chorionic gonadotropin (hCG). The potentiating effect of p,p′-DDT was specific for the FSHR. Moreover, in cells that did not express FSHR, p,p′-DDT had no effect on cAMP response. Thus, the potentiating effect of p,p′-DDT was dependent on the FSHR. In addition, p,p′-DDT increased the sensitivity of FSHR to hCG and to a low molecular weight agonist of the FSHR, 3-((5methyl)-2-(4-benzyloxy-phenyl)-5-{[2-[3-ethoxy-4-methoxy-phenyl)-ethylcarbamoyl]-methyl}-4-oxo-thiazolidin-3-yl)-benzamide (16a). Basal activity in response to p,p′-DDT and potentiation of the FSHR response to FSH by p,p′-DDT varied among FSHR mutants with altered transmembrane domains (TMDs), consistent with an effect of p,p′-DDT via TMD binding. This finding was corroborated by the results of simultaneously docking p,p′-DDT and 16a into the FSHR transmembrane bundle. Conclusion: p,p′-DDT acted as a positive allosteric modulator of the FSHR in our experimental model. These findings suggest that G protein–coupled receptors are additional targets of endocrine disruptors. Citation: Munier M, Grouleff J, Gourdin L, Fauchard M, Chantreau V, Henrion D, Coutant R, Schiøtt B, Chabbert M, Rodien P. 2016

Comparative effects of PBDEs and PCBs on intracellular signaling in rat cerebellar granule neurons

Science.gov (United States)

Polybrominated diphenyl ethers (PBDEs) are synthetic chemicals that do not occur in nature and are structurally similar to polychlorinated biphenyls (PCBs; Figure I) and several chlorinated pesticides. They are comprised of two phenyl rings linked by oxygen and are resistant to p...

Ether the nothing that connects everything

CERN Document Server

Milutis, Joe

2006-01-01

In Ether, the histories of the unseen merge with discussions of the technology of electromagnetism. Navigating more than three hundred years of the ether''s cultural and artistic history, Joe Milutis reveals its continuous reinvention and tangible impact without ever losing sight of its ephemeral, elusive nature. The true meaning of ether, Milutis suggests, may be that it can never be fully grasped.

Usage of the word 'ether'

International Nuclear Information System (INIS)

Duffy, M.C.

1980-01-01

Confusion has been caused by scientists using the one word 'ether' to classify models differing from each other in important respects. Major roles assigned to the word are examined, and the nature of modern ether theories surveyed. The part played by the several meanings attached to the word, in the ether concept, is outlined. (author)

The failure of poly (ether ether ketone) in high speed contacts

Science.gov (United States)

Briscoe, B. J.; Stuart, B. H.; Sebastian, S.; Tweedale, P. J.

1993-04-01

The paper describes an experimental study, with an associated analysis incorporating supplementary data, of the anti-boundary lubricating action of an alkane-aliphatic carboxylic acid lubricant system in a poly (ether ether ketone)-mild steel contact. The experiments involve progressively increasing the load in a contact formed between a polymer plate and a rotating steel shaft and estimating the frictional work dissipated. Scuffing is identified when a rapid increase in frictional work is noted at a characteristic normal load. It is shown that the additive induces premature scuffing. Subsidiary data is provided using Raman spectroscopy and hardness probes, and confirms that certain additives such as decanoic acid and dodecylamine will induce surface plasticization in poly (ether ether ketone). The trends in the frictional data have been interpreted using the adhesive model of friction in conjunction with temperature-dependent interfacial theology and bulk mechanical property data. It is proposed that the scuffing process is induced prematurely as a consequence of excessive additive-induced subsurface plasticization. Restricted surface plasticization in this system provides an enhanced self-lubricating capacity.

BIODEGRADATION OF DDT [1,1,1-TRICHLORO-2,2-BIS(4- CHLOROPHENYL) ETHANE] BY THE WHITE ROT FUNGUS PHANEROCHAETE CHRYSOSPORIUM

Science.gov (United States)

Extensive biodegradation of 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane (DDT) by the white rot fungus Phanerochaete chrysosporium was demonstrated by disappearance and mineralization of [14C]DDT in nutrient nitrogen-deficient cultures. Mass balance studies demonstrated the form...

Radiation initiated polymerisation of phenyl methacrylate. [Gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Raghunath, S.; Rao, M.H.; Rao, K.N. (Bhabha Atomic Research Centre, Bombay (India). Chemistry Div.)

1983-01-01

Radiation initiated polymerisation of phenyl methacrylate has been studied at various dose rates and temperature. Predominant chain transfer to the monomer was observed and ksub(tran)/Ksub(p) the chain transfer constant ratio was found to be 4 x 10/sup -2/.ksub(p)/ksub(tsup(1/2)) value determined by the kinetic data and the molecular weight data were 0.0821 and 0.0198, respectively. IR studies of polymer at low conversion showed the presence of terminal unsaturation which disappeared at saturation conversion, thus showing its participation in the formation of a three dimensional network.

(2E-3-(4-Chlorophenyl-1-(4-hydroxyphenylprop-2-en-1-one

Directory of Open Access Journals (Sweden)

Jerry P. Jasinski

2011-04-01

Full Text Available In the title compound, C15H11ClO2, the dihedral angle between the mean planes of the chlorobenzene and hydroxybenzene rings is 6.5 (6°. The mean plane of the prop-2-en-1-one group makes an angle of 18.0 (1° with the hydroxyphenyl ring and 11.5 (1° with the chlorophenyl ring. The crystal packing is stabilized by intermolecular O—H...O hydrogen bonds, weak C—H...O, C—H...π and π–π stacking interactions [centroid–centroid distances = 3.7771 (7 and 3.6917 (7 Å].

Synthesis, structural, antibacterial and spectral studies of Co (II) complexes with salicylaldehyde and p-chloro-benzaldehyde 4-phenyl thiosemicarbazone

International Nuclear Information System (INIS)

Nur Nadia Dzulkifli; Yang Farina; Ibrahim Baba; Nazlina Ibrahim

2012-01-01

The Co(II) complexes derived from salicylaldehyde 4-phenyl thiosemicarbazone; SaOHtsc, p-chlorobenzaldehyde 4-phenyl thiosemicarbazone; ph-HClbtsc is reported and characterized based on elemental analysis, IR, magnetic susceptibility measurement, 1 H and 13 C NMR spectra. The Co(II) complexes have the molecular formula CoL 2 where the ligand corresponding to SaOHtsc and ph-HClbtsc. The elemental analysis for the ligands and complexes were in a good agreement with the theoretical values. The ligands coordinate to metal ions in different ways which is through mono negative bidentate or di negative tridentate. The magnetic susceptibility measurements showed that the CoL 2 complexes with ligand SaOHtsc are diamagnetic thus making this complexes suitable for NMR studies. The signals at the 10.04 ppm were assigned to N 2 H in the 1 H-NMR spectra of the free ligands was absent in the spectra of the complexes due to the deprotonation of the N 2 H and coordination to the metal centres. The absence of the band in IR spectrum which is assigned to v(N 2 -H) in the spectra of CoL 2 complexes is due to the deprotonation of the ligands upon complexation through azomethine nitrogen and thionic sulphur atom to metal ion. The thiosemicarbazones and its Co(II) complexes showed moderate inhibitory against bacteria Bacillus Subtilis, Staphylococcus Epidermis, Escherichia Coli and Proteus Mirabilis in 10 μg/ disc. (author)

40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide (P-91...

Synthesis and characterization of new alkylating agents 2-amino-4-phenyl thiazole

Energy Technology Data Exchange (ETDEWEB)

Sotelo, E.; Mocelo, R.; Suarez, M.; Gonzalez, L. [Laboratorio de Sintesis Organica, Facultad de Quimica, Universidad de la Habana, La Habana (Cuba)

1996-10-01

Starting with 2-amino-4-phenyl thiazole (1), the preparation of two new nitrosoureas 1-(4-phenyl-2-thiazole)-3-(2-chloroethyl)-3-nitrosourea (3), 1-(5-bromo-4-phenyl-thiazolyl)-3-(2-chloroethyl)-3-nitrosourea (8) and the N,N-bis (2-chloroethyl)-4-phenyl-2-amino thiazole (9) is reported. 9 refs.

Improved efficiency of NiOx-based p-i-n perovskite solar cells by using PTEG-1 as electron transport layer

Science.gov (United States)

Groeneveld, Bart G. H. M.; Najafi, Mehrdad; Steensma, Bauke; Adjokatse, Sampson; Fang, Hong-Hua; Jahani, Fatemeh; Qiu, Li; ten Brink, Gert H.; Hummelen, Jan C.; Loi, Maria Antonietta

2017-07-01

We present efficient p-i-n type perovskite solar cells using NiOx as the hole transport layer and a fulleropyrrolidine with a triethylene glycol monoethyl ether side chain (PTEG-1) as electron transport layer. This electron transport layer leads to higher power conversion efficiencies compared to perovskite solar cells with PCBM (phenyl-C61-butyric acid methyl ester). The improved performance of PTEG-1 devices is attributed to the reduced trap-assisted recombination and improved charge extraction in these solar cells, as determined by light intensity dependence and photoluminescence measurements. Through optimization of the hole and electron transport layers, the power conversion efficiency of the NiOx/perovskite/PTEG-1 solar cells was increased up to 16.1%.

H2O2 recycling during oxidation of the arylglycerol beta-aryl ether lignin structure by lignin peroxidase and glyoxal oxidase.

Science.gov (United States)

Hammel, K E; Mozuch, M D; Jensen, K A; Kersten, P J

1994-11-15

Oxidative C alpha-C beta cleavage of the arylglycerol beta-aryl ether lignin model 1-(3,4-dimethoxy-phenyl)-2-phenoxypropane-1,3-diol (I) by Phanerochaete chrysosporium lignin peroxidase in the presence of limiting H2O2 was enhanced 4-5-fold by glyoxal oxidase from the same fungus. Further investigation showed that each C alpha-C beta cleavage reaction released 0.8-0.9 equiv of glycolaldehyde, a glyoxal oxidase substrate. The identification of glycolaldehyde was based on 13C NMR spectrometry of reaction product obtained from beta-, gamma-, and beta,gamma-13C-substituted I, and quantitation was based on an enzymatic NADH-linked assay. The oxidation of glycolaldehyde by glyoxal oxidase yielded 0.9 oxalate and 2.8 H2O2 per reaction, as shown by quantitation of oxalate as 2,3-dihydroxyquinoxaline after derivatization with 1,2-diaminobenzene and by quantitation of H2O2 in coupled spectrophotometric assays with veratryl alcohol and lignin peroxidase. These results suggest that the C alpha-C beta cleavage of I by lignin peroxidase in the presence of glyoxal oxidase should regenerate as many as 3 H2O2. Calculations based on the observed enhancement of LiP-catalyzed C alpha-C beta cleavage by glyoxal oxidase showed that approximately 2 H2O2 were actually regenerated per cleavage of I when both enzymes were present. The cleavage of arylglycerol beta-aryl ether structures by ligninolytic enzymes thus recycles H2O2 to support subsequent cleavage reactions.

Theoretical investigations of the structures and electronic spectra of 8-hydroxylquinoline derivatives

Science.gov (United States)

Ning, Pan; Ren, Tiegang; Zhang, Yanxin; Zhang, Jinglai

2013-11-01

The spectroscopic properties of 8-hydroxyquinoline derivatives are theoretically investigated by means of density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods. The target molecules are divided into two groups: group (I): (E)-2-(2-(3,5-dimethyl-1-phenyl-1H-pyrazol-4-yl)vinyl)quinolin-8-ol (A), together with corresponding potential reaction products of A with acetic acid, i.e., (E)-2-(2-(3,5-dimethyl-1-phenyl-1H-pyrazol-4-yl)vinyl)quinolin-8-yl acetate (AR1), and (E)-2-(2-(3,5-dimethyl-1-phenyl-1H-pyrazol-4-yl)vinyl)-8-hydroxyquinolinium (AR2); group (II): (E)-2-(2-(1-(4-chlorophenyl)-3,5-dimethyl-1H-pyrazol-4-yl)vinyl)quinolin-8-ol (B), as well as potential reaction products of B with acetic acid, i.e., (E)-2-(2-(1-(4-chlorophenyl)-3,5-dimethyl-1H-pyrazol-4-yl)vinyl)quinolin-8-yl acetate (BR1), and (E)-2-(2-(1-(4-chlorophenyl)-3,5-dimethyl-1H-pyrazol-4-yl)vinyl)-8-hydroxyquinolinium (BR2). The geometries are optimized by B3LYP and M06 methods. The results indicate that product molecules tend to be effectively planar compared with reactants. Subsequently, UV absorption spectra are simulated through TD-DFT method with PCM model to further confirm the reasonable products of two reactions. AR2 and BR2 are identified as the target molecules through the experimental spectra for the real products. It is worth noting that the maximum absorption wavelengths of compounds AR2 and BR2 present prominent red shift compared the initial reactants A and B, respectively, which should be ascribed to the enhancive planarity of products that mentioned above and the decreased HOMO-LUMO energy gap. Geometric structures and optical properties for corresponding compounds are discussed in detail.

Extraction of hafnium by 1-phenyl-3-methyl-4-benzoyl-5-pyralozone from aqueous-alcoholic solutions

International Nuclear Information System (INIS)

Hala, J.; Prihoda, J.

1975-01-01

Extraction of hafnium by 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL) in benzene, toluene, chloroform and tetrachloromethane from aqueous-alcoholic solutions of the formal acidity of 2M-HClO 4 was studied. Methyl, ethyl, n- and isopropyl, tert-butyl and allyl alcohol as well as ethylene glycol monomethyl ether and propylene glycol were used as organic components of the mixed aqueous-organic phase. Their presence in some cases resulted in a synergic increase in the distribution ratio of hafnium. The increase is interpreted using the results of a slope analysis and measurements of the alcohol distribution and the relative permittivity of the organic phase. It is suggested that HfL 4 molecules were solvated by alcohol molecules in the organic phase. At high alcohol concentration synergism changed into antagonism. This was caused by changes in the distribution of HL and its interaction with the alcohol in the organic phase. (author)

Synthesis and evaluation of modified chalcone based p53 stabilizing agents

KAUST Repository

Iftikhar, Sunniya; Khan, Sardraz; Bilal, Aishah; Manzoor, Safia; Abdullah, Muhammad; Emwas, Abdul-Hamid M.; Sioud, Salim; Gao, Xin; Chotana, Ghayoor Abbas; Faisal, Amir; Saleem, Rahman Shah Zaib

2017-01-01

Tumor suppressor protein p53 induces cell cycle arrest and apoptotic cell death in response to various cellular stresses thereby preventing cancer development. Activation and stabilization of p53 through small organic molecules is, therefore, an attractive approach for the treatment of cancers retaining wild-type p53. In this context, a series of nineteen chalcones with various substitution patterns of functional groups including chloro, fluoro, methoxy, nitro, benzyloxy, 4-methyl benzyloxy was prepared using Claisen-Schmidt condensation. The compounds were characterized using NMR, HRMS, IR and melting points. Evaluation of synthesized compounds against human colorectal (HCT116) and breast (Cal-51) cancer cell lines revealed potent antiproliferative activities. Nine compounds displayed GI50 values in the low micromolar to submicromolar range; for example (E)-1-phenyl-3-(3,4,5-trimethoxyphenyl)prop-2-en-1-one (SSE14108) showed GI50 of 0.473 ± 0.043 µM against HCT116 cells. Further analysis of these compounds revealed that (E)-3-(4-chlorophenyl)-1-phenylprop-2-en-1-one (SSE14105) and (E)-3-(4-methoxyphenyl)-1-phenylprop-2-en-1-one (SSE14106) caused rapid (4 and 8-hour post-treatment) accumulation of p53 in HCT116 cells similar to its induction by positive control, Nutlin-3. Such activities were absent in 3-(4-methoxyphenyl)propiophenone (SSE14106H2) demonstrating the importance of conjugated ketone for antiproliferative and p53 stabilizing activity of the chalcones. We further evaluated p53 levels in the presence of cycloheximide (CHX) and the results showed that the p53 stabilization was regulated at post-translational level through blockage of its degradation. These chalcones can, therefore, act as fragment leads for further structure optimization to obtain more potent p53 stabilizing agents with enhanced anti-proliferative activities.

Synthesis and evaluation of modified chalcone based p53 stabilizing agents

KAUST Repository

Iftikhar, Sunniya

2017-07-15

Tumor suppressor protein p53 induces cell cycle arrest and apoptotic cell death in response to various cellular stresses thereby preventing cancer development. Activation and stabilization of p53 through small organic molecules is, therefore, an attractive approach for the treatment of cancers retaining wild-type p53. In this context, a series of nineteen chalcones with various substitution patterns of functional groups including chloro, fluoro, methoxy, nitro, benzyloxy, 4-methyl benzyloxy was prepared using Claisen-Schmidt condensation. The compounds were characterized using NMR, HRMS, IR and melting points. Evaluation of synthesized compounds against human colorectal (HCT116) and breast (Cal-51) cancer cell lines revealed potent antiproliferative activities. Nine compounds displayed GI50 values in the low micromolar to submicromolar range; for example (E)-1-phenyl-3-(3,4,5-trimethoxyphenyl)prop-2-en-1-one (SSE14108) showed GI50 of 0.473 ± 0.043 µM against HCT116 cells. Further analysis of these compounds revealed that (E)-3-(4-chlorophenyl)-1-phenylprop-2-en-1-one (SSE14105) and (E)-3-(4-methoxyphenyl)-1-phenylprop-2-en-1-one (SSE14106) caused rapid (4 and 8-hour post-treatment) accumulation of p53 in HCT116 cells similar to its induction by positive control, Nutlin-3. Such activities were absent in 3-(4-methoxyphenyl)propiophenone (SSE14106H2) demonstrating the importance of conjugated ketone for antiproliferative and p53 stabilizing activity of the chalcones. We further evaluated p53 levels in the presence of cycloheximide (CHX) and the results showed that the p53 stabilization was regulated at post-translational level through blockage of its degradation. These chalcones can, therefore, act as fragment leads for further structure optimization to obtain more potent p53 stabilizing agents with enhanced anti-proliferative activities.

Silane Cross-Linked Sulfonted Poly(Ether Ketone/Ether Benzimidazoles for Fuel Cell Applications

Directory of Open Access Journals (Sweden)

Zilu Yao

2017-11-01

Full Text Available γ-(2,3-epoxypropoxy propyltrimethoxysilane (KH-560 was incorporated in various proportions into side-chain-type sulfonated poly(ether ketone/ether benzimidazole (SPEKEBI as a crosslinker, to make membranes with high ion exchange capacities and excellent performance for direct methanol fuel cells (DMFCs. Systematical measurements including Fourier transform infrared (FT-IR, scanning electron microscopy-energy-dispersive and X-ray photoelectron spectroscopy (XPS proved the complete disappearance of epoxy groups in KH-560 and the existence of Si in the membranes. The resulting membranes showed increased mechanical strength and thermal stability compared to the unmodified sulfonated poly(ether ketone/ether benzimidazole membrane in appropriate doping amount. Meanwhile, the methanol permeability has decreased, leading to the increase of relative selectivities of SPEKEBI-x-SiO2 membranes. Furthermore, the H2/O2 cell performance of SPEKEBI-2.5-SiO2 membrane showed a much higher peak power density compared with the pure SPEKEBI memrbrane.

Radiation-induced cationic curing of vinyl ethers

International Nuclear Information System (INIS)

Lapin, S.C.

1992-01-01

Recently there has been an increasing interest in nonacrylate radiation-curable coatings. Vinyl ethers are particularly reactive under cationic polymerization reaction conditions. The high efficiency of the photoacid initiators combined with the high reactivity of vinyl ether monomers makes this a potentially very useful system. This chapter discusses the preparation of vinyl ethers, introduces vinyl ether-functional monomers and oligomers, describes radiation-induced cationic polymerization of vinyl ethers, and discusses various coating systems. Throughout the chapter, an emphasis is placed on radiation-curable coating applications. 64 refs., 5 figs., 11 tabs

Poly (ether ether ketone) membranes for fuel cells

International Nuclear Information System (INIS)

Marrero, Jacqueline C.; Gomes, Ailton de S.; Filho, Jose C.D.; Hui, Wang S.; Oliveira, Vivianna S. de

2015-01-01

Polymeric membranes were developed using a SPEEK polymer matrix (sulphonated poly (ether ether ketone)), containing hygroscopic particles of zirconia (Zr) (incorporated by sol-gel method), for use as electrolyte membranes in fuel cells. SPEEK with different sulfonation degrees were used: 63 and 86%. The thermal analysis (TGA and DSC) was carried out to characterize the membranes and electrochemical impedance spectroscopy (EIS) was carried out to evaluating the proton conductivity of the membranes. Additional analysis were underway in order to characterize these membranes, which include: X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) in order to evaluate the influence of zirconia and sulfonation degree on the properties of the membranes. (author)

Detection of a deuterium isotope effect in di- and trisubstituted alkylphenylnitrosoureas. An SCE study in Chinese hamster V79-E cells

International Nuclear Information System (INIS)

Thust, R.; Mendel, J.; Bach, B.; Schwarz, H.

1985-01-01

The genotoxicity of 1-methyl-3-phenyl-1-nitrosourea (MPNU), 1-methyl-3-(p-chlorophenyl)-1-nitrosourea (C1-MPNU), 1-ethyl-3-phenyl-1-nitrosourea (EPNU), 1,3-dimethyl-3-phenyl-1-nitrosourea (DMPNU) and their derivatives substituted by deuterium in different positions was studied using sister chromatid exchange (SCE) induction in Chinese hamster V79-E cells. Deuterium substitution in the 1-methyl group of MPNU (MPNU-d3) and C1-MPNU (C1-MPNU-d3) diminished the SCE-inducing capacity by 20-30% and by 30-40% in DMPNU (DMPNU-d3B). There was no altered SCE activity detected when the phenyl group of MPNU (MPNU-d5) or the 3-methyl group of DMPNU (DMPNU-d3A) was deuterium labeled. No isotope effect was detected in deuterated EPNU derivatives, presumably due to the instability of these compounds. It is surmised that the easier delocalization of the positive charge in the deuterated alkyl diazonium ion causes a diminished reactivity and therefore influences the type and amount of DNA alkylation. Furthermore, the experiments with DMPNU and its derivatives revealed that, in contrast to mono- and disubstituted nitrosoureas, the biological activities of these very stable trisubstituted nitrosoureas are strongly influenced by a serum factor in the culture fluid

Detection of a deuterium isotope effect in di- and trisubstituted alkylphenylnitrosoureas. An SCE study in Chinese hamster V79-E cells.

Science.gov (United States)

Thust, R; Mendel, J; Bach, B; Schwarz, H

1985-06-01

The genotoxicity of 1-methyl-3-phenyl-1-nitrosourea (MPNU), 1-methyl-3-(p-chlorophenyl)-1-nitrosourea (C1-MPNU), 1-ethyl-3-phenyl-1-nitrosourea (EPNU), 1,3-dimethyl-3-phenyl-1-nitrosourea (DMPNU) and their derivatives substituted by deuterium in different positions was studied using sister chromatid exchange (SCE) induction in Chinese hamster V79-E cells. Deuterium substitution in the 1-methyl group of MPNU (MPNU-d3) and C1-MPNU (C1-MPNU-d3) diminished the SCE-inducing capacity by 20-30% and by 30-40% in DMPNU (DMPNU-d3B). There was no altered SCE activity detected when the phenyl group of MPNU (MPNU-d5) or the 3-methyl group of DMPNU (DMPNU-d3A) was deuterium labeled. No isotope effect was detected in deuterated EPNU derivatives, presumably due to the instability of these compounds. It is surmised that the easier delocalization of the positive charge in the deuterated alkyl diazonium ion causes a diminished reactivity and therefore influences the type and amount of DNA alkylation. Furthermore, the experiments with DMPNU and its derivatives revealed that, in contrast to mono- and disubstituted nitrosoureas, the biological activities of these very stable trisubstituted nitrosoureas are strongly influenced by a serum factor in the culture fluid.

Synthesis of isoprenoid bisphosphonate ethers through C–P bond formations: Potential inhibitors of geranylgeranyl diphosphate synthase

Directory of Open Access Journals (Sweden)

Xiang Zhou

2014-07-01

Full Text Available A set of bisphosphonate ethers has been prepared through sequential phosphonylation and alkylation of monophosphonate ethers. After formation of the corresponding phosphonic acid salts, these compounds were tested for their ability to inhibit the enzyme geranylgeranyl diphosphate synthase (GGDPS. Five of the new compounds show IC50 values of less than 1 μM against GGDPS with little to no activity against the related enzyme farnesyl diphosphate synthase (FDPS. The most active compound displayed an IC50 value of 82 nM when assayed with GGDPS, and no activity against FDPS even at a 10 μM concentration.

Ion-Selective Ionic Polymer Metal Composite (IPMC) actuator based on crown ether containing sulfonated Poly(Arylene Ether Ketone)

NARCIS (Netherlands)

Tas, S.; Zoetebier, B.; Sukas, O.S.; Bayraktar, M.; Hempenius, M.; Vancso, G.J.; Nijmeijer, K.

2017-01-01

This study introduces the concept of ion selective actuation in polymer metal composite actuators, employing crown ether bearing aromatic polyether materials. For this purpose, sulfonated poly(arylene ether ketone) (SPAEK) and crown ether containing SPAEK with molar masses suitable for membrane

Crystal structure of chlorido(η2-phenyl isothiocyanate-κ2C,S-mer-tris(trimethylphosphane-κPiridium(I

Directory of Open Access Journals (Sweden)

Joseph S. Merola

2014-11-01

Full Text Available The molecule of the title compound, [IrCl(C7H5NS(C3H9P3], is a distorted octahedral iridium complex with three PMe3 ligands arranged in a meridional geometry, a chloride ion cis to all three PMe3 groups and the phenyl isothiocyanate ligand bonded in an η2-fashion through the C and S atoms. The C atom is trans to the chloride ion and the S atom is responsible for a significant deviation from an ideal octahedral geometry. The geometric parameters for the metal-complexing phenyl isothiocyanate group are compared with other metal-complexed phenyl isothiocyanates, as well as with examples of uncomplexed aryl isothiocyanates.

All solid supercapacitor based on polyaniline and crosslinked sulfonated poly[ether ether ketone

International Nuclear Information System (INIS)

Sivaraman, P.; Kushwaha, R.K.; Shashidhara, K.; Hande, V.R.; Thakur, A.P.; Samui, A.B.; Khandpekar, M.M.

2010-01-01

All solid supercapacitor based on polyaniline (PANI) and crosslinked sulfonated poly[ether ether ketone] (XSPEEK,) is reported in this paper. The crosslinker used for sulfonated poly[ether ether ketone] (SPEEK) is 1,4-bis(hydroxymethyl) benzene. The XSPEEK is used as both solid electrolyte and separator membrane. Supercapacitors are fabricated using various PANI/XSPEEK weight ratios. These are characterized by cyclic voltammetry and galvanostatic charge-discharge studies. The supercapacitor with PANI/XSPEEK weight ratio 1:0.5, exhibit a specific capacitance of 480 F g -1 of PANI. To the best of authors' knowledge, the value reported here is the highest for a supercapacitor based on a proton conducting solid polymer electrolyte and PANI. Detailed electrochemical impedance spectroscopy analysis is carried out. The analysis shows that the complex capacitance of the supercapacitor depends on the XSPEEK content. The time constant (t 0 ), derived from the imaginary part of complex capacitance decreases with increase in the XSPEEK content in the supercapacitor. Cycle life characteristics of the supercapacitor show a decrease in specific capacitance during initial cycles and get stabilized during later cycles.

40 CFR 721.5356 - Ethanol, 2,2′2″-nitrilotris-, compound with alpha-2,4,6-tris (1-phenylethyl)phenyl]-omega...

Science.gov (United States)

2010-07-01

...-, compound with alpha-2,4,6-tris (1-phenylethyl)phenyl]-omega-hydroxypoly (oxy-1,2-ethanediyl) phosphate. 721...]-omega-hydroxypoly (oxy-1,2-ethanediyl) phosphate. (a) Chemical substance and significant new uses... alpha-[2,4,6-tris(1-phenylethyl)phenyl]-omega-hydroxypoly (oxy-1,2-ethanediyl) phosphate (PMN P-98-185...

Hydrogen storage by functionalised Poly(ether ether ketone)

Energy Technology Data Exchange (ETDEWEB)

Pedicini, R.; Giacoppo, G.; Carbone, A.; Passalacqua, E. [CNR-ITAE, Messina (Italy). Inst. for Advanced Energy Technologies

2010-07-01

In this work a functionalised polymer was studied as potential material for hydrogen storage in solid state. A Poly(ether ether ketone) (PEEK) matrix was modified by a manganese oxide in situ formation. Here we report the functionalisation process and the preliminary results on hydrogen storage capability of the synthesised polymer. The polymer was characterized by Scanning Electron Microscopy, X-ray diffraction, Transmission Electron Microscopy and Gravimetric Hydrogen Adsorption measurements. In the functionalised PEEK, morphological changes occur as a function of oxide precursor concentration and reaction time. Promising results by gravimetric measurements were obtained with a hydrogen sorption of 0.24%wt/wt at 50 C and 60 bar, moreover, reversibility hydrogen adsorption and desorption in a wide range of both temperature and pressure was confirmed. (orig.)

Biofilm behavior on sulfonated poly(ether-ether-ketone) (sPEEK)

Energy Technology Data Exchange (ETDEWEB)

Montero, Juan F.D. [Center for Research on Dental Implants (CEPID), School of Dentistry (ODT), Federal University of Santa Catarina - UFSC, Florianópolis, SC 88040-900 (Brazil); Tajiri, Henrique A.; Barra, Guilherme M.O.; Fredel, Márcio C. [Department of Mechanical Engineering (EMC), Federal University of Santa Catarina (UFSC), Florianópolis, SC 88040-900 (Brazil); Benfatti, Cesar A.M.; Magini, Ricardo S. [Center for Research on Dental Implants (CEPID), School of Dentistry (ODT), Federal University of Santa Catarina - UFSC, Florianópolis, SC 88040-900 (Brazil); Pimenta, Andréa L. [Integrated Laboratories Technologies (InteLAB), Dept. Chemical Engineering (EQA), Federal University of Santa Catarina - UFSC, Florianópolis, SC 88040-970 (Brazil); Department of Biologie, Université de Cergy Pontoise, 2, Av. Adolphe Chauvin, 95302 Cergy Pontoise (France); Souza, Júlio C.M., E-mail: julio.c.m.souza@ufsc.br [Center for Research on Dental Implants (CEPID), School of Dentistry (ODT), Federal University of Santa Catarina - UFSC, Florianópolis, SC 88040-900 (Brazil); Center for Microelectromechanical Systems (CMEMS), Dept. Mechanical Engineering (DEM), Campus Azurém, 4800-058 Guimarães (Portugal)

2017-01-01

Poly(ether-ether-ketone) (PEEK) has also shown to be very attractive for incorporating therapeutic compounds thanks to a sulfonation process which modifies the material structure resulting in a sulfonated-PEEK (sPEEK). Concerning biomedical applications, the objective of this work was to evaluate the influence of different sulfonation degree of sPEEK on the biofilm growth. PEEK samples were functionalized by using sulphuric acid (98%) and then dissolved into dimethyl-sulfoxide. A dip coating technique was used to synthesize sPEEK thin films. The sulfonation degree of the materials was analyzed by FT-IR, H NMR, TG and IEC. The surfaces were characterized by scanning electron microscopy, profilometry and contact angle analyses. Subsequently, the biofilm formation on sulfonated-PEEK based on Streptococcus mutans and Enterococcus faecalis was measured by spectrophotometry, colony forming units (CFU mL{sup −1}) and SEM. Results obtained from thermal and chemical analyses showed an intensification in sulfonation degree for sPEEK at 2 and 2.5 h. The E. faecalis or S. mutans biofilm growth revealed statistically significant differences (p < 0.05) between 2 and 3 h sulfonation groups. A significant decrease (p < 0.05) in CFU mL{sup −1} was recorded for S. mutans or E. faecalis biofilm grown on 2.5 or 3 h sPEEK. Regarding the thermal-chemical and microbiologic analyses, the sulfonation degree of sPEEK ranging from 2 up to 3 h was successful capable to decrease the biofilm growth. That revealed an alternative strategy to embed anti-biofilm and therapeutic compounds into PEEK avoiding infections in biomedical applications. - Highlights: • PEEK can be dissolved to incorporate therapeutic compounds. • High sulfonation degree on sPEEK affected the biofilm growth. • The sulfonation degree must be controlled to maintain the properties of sPEEK.

Biofilm behavior on sulfonated poly(ether-ether-ketone) (sPEEK)

International Nuclear Information System (INIS)

Montero, Juan F.D.; Tajiri, Henrique A.; Barra, Guilherme M.O.; Fredel, Márcio C.; Benfatti, Cesar A.M.; Magini, Ricardo S.; Pimenta, Andréa L.; Souza, Júlio C.M.

2017-01-01

Poly(ether-ether-ketone) (PEEK) has also shown to be very attractive for incorporating therapeutic compounds thanks to a sulfonation process which modifies the material structure resulting in a sulfonated-PEEK (sPEEK). Concerning biomedical applications, the objective of this work was to evaluate the influence of different sulfonation degree of sPEEK on the biofilm growth. PEEK samples were functionalized by using sulphuric acid (98%) and then dissolved into dimethyl-sulfoxide. A dip coating technique was used to synthesize sPEEK thin films. The sulfonation degree of the materials was analyzed by FT-IR, H NMR, TG and IEC. The surfaces were characterized by scanning electron microscopy, profilometry and contact angle analyses. Subsequently, the biofilm formation on sulfonated-PEEK based on Streptococcus mutans and Enterococcus faecalis was measured by spectrophotometry, colony forming units (CFU mL −1 ) and SEM. Results obtained from thermal and chemical analyses showed an intensification in sulfonation degree for sPEEK at 2 and 2.5 h. The E. faecalis or S. mutans biofilm growth revealed statistically significant differences (p < 0.05) between 2 and 3 h sulfonation groups. A significant decrease (p < 0.05) in CFU mL −1 was recorded for S. mutans or E. faecalis biofilm grown on 2.5 or 3 h sPEEK. Regarding the thermal-chemical and microbiologic analyses, the sulfonation degree of sPEEK ranging from 2 up to 3 h was successful capable to decrease the biofilm growth. That revealed an alternative strategy to embed anti-biofilm and therapeutic compounds into PEEK avoiding infections in biomedical applications. - Highlights: • PEEK can be dissolved to incorporate therapeutic compounds. • High sulfonation degree on sPEEK affected the biofilm growth. • The sulfonation degree must be controlled to maintain the properties of sPEEK.

An efficient and highly selective ortho-tert-butylation of p-cresol with methyl tert-butyl ether catalyzed by sulfonated ionic liquids

Directory of Open Access Journals (Sweden)

Alamdari Reza Fareghi

2014-01-01

Full Text Available A novel series of sulfonic acid-functionalized ionic liquids (SFILs was found to act as efficient catalysts for ortho-tert-butylation of p-cresol with methyl tert-butyl ether (MTBE as the tert-butylating agent without an added solvent. The mono o-tert-butylated product was obtained in up to 80.4% isolated yield and 95.2% selectivity under such green conditions. No O-tert-butylated byproducts were formed.

Flourimetric and prototropic studies on the inclusion complexation of 2-amino and 4-aminodiphenyl ethers with {beta}-cyclodextrin: Unusual behavior of 4-aminodiphenyl ether

Energy Technology Data Exchange (ETDEWEB)

Enoch, Israel V. Muthu Vijayan [Department of Chemistry, Annamalai University, Annamalainagar 608 002, Tamil Nadu (India); Swaminathan, Meenakshisundaram [Department of Chemistry, Annamalai University, Annamalainagar 608 002, Tamil Nadu (India)], E-mail: chemsam@yahoo.com

2007-12-15

The fluorescence characteristics of diphenyl ether (DPE), 2-aminodiphenyl ether (2ADPE) and 4-aminodiphenyl ether (4ADPE) and prototropic behavior of 2ADPE and 4ADPE on inclusion complexation with {beta}-cyclodextrin have been investigated. DPE forms 1:1 complex whereas 2ADPE and 4ADPE form 1:2 complex with {beta}-CDx. The fluorimetric and prototropic behaviors of 4ADPE in {beta}-CDx are different from those in aqueous solution. The dual fluorescence of 4ADPE in {beta}-CDx is found to be due to twisted intramolecular charge transfer (TICT) character induced by inclusion complexation. The two equilibria viz. monocation{r_reversible}monocation solvent exciplex{r_reversible}neutral reported for 4ADPE in aqueous solution are not observed in presence of {beta}-CDx. The ground and excited state pK{sub a} values for monocation-neutral equilibrium of 2ADPE and 4ADPE have been reported.

Hepatoprotective activity of petroleum ether, diethyl ether, and methanol extract of Scoparia dulcis L. against CCl4-induced acute liver injury in mice.

Science.gov (United States)

Praveen, T K; Dharmaraj, S; Bajaj, Jitendra; Dhanabal, S P; Manimaran, S; Nanjan, M J; Razdan, Rema

2009-06-01

The present study was aimed at assessing the hepatoprotective activity of 1:1:1 petroleum ether, diethyl ether, and methanol (PDM) extract of Scoparia dulcis L. against carbon tetrachloride-induced acute liver injury in mice. The PDM extract (50, 200, and 800 mg/kg, p.o.) and standard, silymarin (100 mg/kg, p.o) were tested for their antihepatotoxic activity against CCl4-induced acute liver injury in mice. The hepatoprotective activity was evaluated by measuring aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase, and total proteins in serum, glycogen, lipid peroxides, superoxide dismutase, and glutathione reductase levels in liver homogenate and by histopathological analysis of the liver tissue. In addition, the extract was also evaluated for its in vitro antioxidant activity using 1, 1-Diphenyl-2-picrylhydrazyl scavenging assay. The extract at the dose of 800 mg/kg, p.o., significantly prevented CCl4-induced changes in the serum and liver biochemistry (P Scoparia dulcis L. possesses potential hepatoprotective activity, which may be attributed to its free radical scavenging potential, due to the terpenoid constituents.

Synthesis and Characterization of Ti-Phenyl at SiO2 Core-Shell Nanoparticles Catalyst

International Nuclear Information System (INIS)

Syamsi Aini; Jon Efendi; Syamsi Aini; Jon Efendi

2012-01-01

This study highlights the potential use of Ti-Phenyl at SiO 2 core-shell nanoparticles as heterogeneous catalysis in oxidation reaction. The Ti-Phenyl at SiO 2 was synthesized by reduction of TiCl 4 and diazonium salt with sodium borohydride to produce phenyl titanium nanoparticles (Ti-Phenyl), followed by the silica shell coating using tetraethyl orthosilicate (TEOS). The Ti-Phenyl at SiO 2 nanoparticles were characterized by Fourier transform infrared (FTIR) spectrometer, diffuse reflectance (DR) UV-visible spectrometer, thermogravimetric analyzer (TGA), X-ray diffraction (XRD) spectrometer, field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The core-shell size of Ti-Phenyl at SiO 2 was in the range of 40 to 100 nm with its core composed with an agglomeration of Ti-Phenyl. The Ti-Phenyl at SiO 2 was active as a catalyst in the liquid phase epoxidation of 1-octene with aqueous hydrogen peroxide as an oxidant. (author)

Study of pH dependence using molecular modeling in reversed-phase liquid chromatography of 1-phenyl-3-methyl-5-pyrazolone derivatives of aldose

International Nuclear Information System (INIS)

Yamamoto, Fumiko M.; Rokushika, Souji

2004-01-01

A series of 1-phenyl-3-methyl-5-pyrazolone (PMP) aldose was eluted on a C 18 column with an acetonitrile-phosphate buffer over the range of pH 2-10 in reversed phase liquid chromatography. The relationship between the retention factor, k, and the eluent pH was expressed by an equilibrium scheme representing the probable retention process. The experimental data were fitted to the correlation curve drawn according to the equation containing the formation of the hydrogen bond with a hydroxonium ion in the eluent and the ionization of the oxygen atoms in the pyrazolone rings of the solute. The conformational changes of PMP-aldose according with the eluent pH were corroborated by computer-aided molecular modeling using quantum chemical calculations. The retention behavior was elucidated as a function of the geometrical feature of the PMP-aldose

Crystal and molecular structure studies of (Z)-N-methyl-C-4-substituted phenyl nitrones by XRD, DFT, FTIR and NMR methods

Science.gov (United States)

Lasri, Jamal; Eltayeb, Naser Eltaher; Haukka, Matti; Alghamdi, Yousef

2017-01-01

(Z)-N-methyl-C-4-substituted phenyl nitrones -O+N(Me)=C(H)R (Z-2a R = 4-ClC6H4, Z-2b R = 4-NO2C6H4, Z-2c R = 4-CH3OC6H4) were synthesized and characterized by elemental analyses, FTIR, 1H, 13C and DEPT-135 NMR spectroscopy and also by single crystal X-ray diffraction (in the case of Z-2a and Z-2b). The geometries of the nitrone molecules Z-2a, Z-2b and Z-2c and their E-isomers; (E)-N-methyl-C-4-chlorophenyl nitrone E-2a, (E)-N-methyl-C-4-nitrophenyl nitrone E-2b and (E)-N-methyl-C-4-methoxyphenyl nitrone E-2c were optimized using density functional theory (DFT) at the B3LYP/6-311++G(d,p) level of theory. The theoretical vibrational frequencies obtained by DFT calculations are in good agreement with the experimental values. The electronics structures were described in terms of the distribution of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). Gauge independent atomic orbital (GIAO) method was used to calculate the NMR spectra, the correlation between the calculated and experimental chemical shifts is mostly in the range of 0.94-0.97 for 1H, whereas, the correlation for 13C is 0.99. Thermodynamics study showed that the Z-isomer is favoured than E-isomer with energy barrier of 7.1, 7.2 and 7.1 kcal/mol for Z-2a, Z-2b and Z-2c, respectively. The abundance of the most stable species Z-isomers is equal to 99.99% for all three compounds at 298 K in gas phase.

Activity relationships for aromatic crown ethers

International Nuclear Information System (INIS)

Wilson, Mark James

1998-01-01

This thesis involves an investigation of aromatic crown ethers and a study of their binding constants for alkali metals. The study was motivated by the current needs of the semiconductor industry to improve the scavenging of mobile ions from fabricated circuits. A number of aromatic crown ethers have been sulphonated in an attempt to improve their water solubility and cation binding activity. These materials have been extensively studied and their binding activity determined. In collaboration with a molecular modelling study, the effect of ionisable sulphonate groups on the macrocycles' behaviour has been investigated. The broader issue of the effect of substituents in aromatic crown ethers has also been studied with the preparation of a wide range of substituted crown ethers. The cation binding activity of these materials has been found to bear a simple relationship to the electron withdrawing nature of the aromatic substituents. This relationship can be accurately monitored using electronic charge densities from molecular modelling and this rational has been applied to the study of proton ionisable and lariating crown ethers. The incorporation of crown ethers into polyamic acid and polyimide frameworks has also been investigated, where the resulting materials have been found to exhibit unusual cation binding and uptake properties. These results imply that the combination of the crown ethers' macrocycle and adjacent carboxylic acid residues, from the polyamic acids, are conducive to effective cationic binding. NMR measurements, in conjunction with molecular modelling, have been used to explore the geometry changes encountered as the crown ether goes from it's uncomplexed to its complexed state. The energy requirement for these geometry changes has subsequently been used to examine the cation selectivity of these materials. The electronic charge changes associated with the complexation have also been investigated and correlated with the theoretical results. (author)

Metabolism of nitrodiphenyl ether herbicides by dioxin-degrading bacterium Sphingomonas wittichii RW1.

Science.gov (United States)

Keum, Young Soo; Lee, Young Ju; Kim, Jeong-Han

2008-10-08

Nitrodiphenyl ether herbicides, including chlomethoxyfen, nitrofen, and oxyfluorfen are potent herbicides. Some metabolites and parent compounds are considered as possible mutagens and endocrine disruptors. Both properties pose serious hygienic and environmental risks. Sphingomonas wittichii RW1 is a well-known degrader of polychlorinated dibenzo- p-dioxins, dibenzofurans, and diphenyl ethers. However, no detailed research of its metabolic activity has been performed against pesticides with a diphenyl ether scaffold. In this study, we report S. wittichii RW1 as a very potent diphenyl ether herbicide-metabolizing bacterium with broad substrate specificity. The structures of metabolites were determined by instrumental analysis and synthetic standards. Most pesticides were rapidly removed from the culture medium in the order of nitrofen > oxyfluorfen > chlomethoxyfen. In general, herbicides were degraded through the initial reduction and N-acetylation of nitro groups, followed by ether bond cleavage. Relatively low concentrations of phenolic and catecholic metabolites throughout the study suggested that these metabolites were rapidly metabolized and incorporated into primary metabolism. These results indicate that strain RW1 has very versatile metabolic activities over a wide range of environmental contaminants.

cis-Bis(O-methyl­dithio­carbonato-κ2 S,S′)bis­(tri­phenyl­phosphane-κP)ruthenium(II)

Science.gov (United States)

Valerio-Cárdenas, Cintya; Hernández-Ortega, Simón; Reyes-Martínez, Reyna; Morales-Morales, David

2013-01-01

In the title compound, [Ru(CH3OCS2)2(C18H15P)2], the RuII atom is in a distorted octa­hedral coordination by two xanthate anions (CH3OCS2) and two tri­phenyl­phosphane (PPh3) ligands. Both bidentate xanthate ligands coordinate the RuII atom with two slightly different Ru—S bond lengths but with virtually equal bite angles [71.57 (4) and 71.58 (3)°]. The packing of the complexes is assured by C—H⋯O and C—H⋯π inter­actions. PMID:24046578

Study of DDT and its derivatives DDD, DDE adsorption and degradation over Fe-SBA-15 at low temperature

Institute of Scientific and Technical Information of China (English)

Hailin Wang; Hua Tian; Zhengping Hao

2012-01-01

Mesoporous SBA-15 with different Fe2O3 loading were synthesized by an in-situ coating progress for removals of dichlorodiphenyltrichloroethane(DDT)and its derivatives,i.e.,1,1-dichloro-2,2-bis-(p-chlorophenyl)ethane(DDD)and 1,l-dichloro-2,2-bis-(4-chloro -phenyl)ethane(DDE).The results from XRD(X-ray diffractometer),TEM(transmission electron microscopy)indicated that the iron could be well dispersed on SBA-15 within 6 wt.% Fe2O3 loading.Nitrogen adsorption-desorption tests indicated that the synthesized materials were characterized by ordered meso-structure,high surface area and large pore volume.DDTs were removed from aqueous media in 12-hr treatment and high removal efficiency of DDTs was achieved at over 94%.DDTs could be completely degraded at 350℃ under the existence of SBA-15 with 4 wt.% Fe2O3 loading.The final degradation products of DDT were dichlorobenzophenone (DCB)and bis-(4-chloro-phenyl)methane(DDM),suggesting a complete dechlorination from trichloromethyl.

Biaxial deformation behaviour of poly-ether-ether-ketone

Science.gov (United States)

Turner, Josh; Menary, Gary; Martin, Peter

2018-05-01

The biaxial tensile properties of thin poly-ether-ether-ketone (PEEK) films are presented. Investigation into the biaxial mechanical behaviour of PEEK films will provide a preliminary insight into the anticipated stress/strain response, and potential suitability, to the possible fabrication of thin walled parts through stretch blow moulding and thermoforming processes - with the multi-axial state of strain imposed onto the heated thermoplastic sheet representative of the expected strain history experienced during these material forming processes. Following identification of the prospective forming temperature window, the biaxial mechanical behaviour of the material is characterized under differing modes of deformation, at a nominal strain rate of 1 s-1. The temperature dependence is outlined within - with an appreciable increase in flow behaviour correlated with specimen temperature exceeding its glass transition temperature (Tg).

Novel crosslinked membranes based on sulfonated poly(ether ether ketone) for direct methanol fuel cells.

Science.gov (United States)

Zhu, Yuanqin; Zieren, Shelley; Manthiram, Arumugam

2011-07-14

Novel covalently crosslinked membranes based on sulfonated poly(ether ether ketone) and carboxylated polysulfone exhibit much lower methanol crossover and better performance in direct methanol fuel cells at 65 °C in 1 and 2 M methanol solutions compared to Nafion 115 membranes.

Preparation and Characterization of Sulfonated Poly (ether ether ...

African Journals Online (AJOL)

NJD

2007-08-10

Aug 10, 2007 ... Preparation and Characterization of Sulfonated Poly (ether ... Currently perfluori- ... with phosphoric acid solution according to the method described earlier.11,12 ... where A is the membrane area available for diffusion; CA is.

The lowest excited singlet state of isolated 1-phenyl-butadiene and 1-phenyl-hexatriene

NARCIS (Netherlands)

Kohler, B.E.; Shaler, T.A.; Buma, W.J.; Song, K.; Nuss, J.M.

1992-01-01

We report vibrationally resolved S0S1 excitation spectra and vibronic level decay times for the phenyl-substituted polyenes 1-phenylbutadiene and 1-phenylhexatriene seeded in supersonic He expansions. This information was obtained using one- and two-color resonance-enhanced multiphoton ionization

Lithiated and sulphonated poly(ether ether ketone) solid state electrolyte films for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Chiu, K.-F.; Su, S.-H., E-mail: minimono42@gmail.com

2013-10-01

Poly(ether ether ketone) (PEEK) films have been synthesised and used as solid-state electrolytes for supercapacitors. In order to increase their ion conductivity, the PEEK films were sulphonated by sulphuric acid, and various amounts of LiClO{sub 4} were added. The solid-state electrolyte films were characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. The ionic conductivities of the electrolyte films were analysed by performing electrochemical impedance spectroscopy. The obtained electrolyte films can be sandwiched or directly coated on activated carbon electrodes to form solid-state supercapacitors. The electrochemical characteristics of these supercapacitors were investigated by performing cyclic voltammetry and charge–discharge tests. Under an optimal content of LiClO{sub 4}, the supercapacitor can provide a capacitance as high as 190 F/g. After 1000 cycles, the supercapacitors show almost no capacitance fading, indicating high stability of the solid-state electrolyte films. - Highlights: • Poly(ether ether ketone) (PEEK) films have been used as solid-state electrolytes. • LiClO4 addition can efficiently improve the ionic conductivity. • Supercapacitors using PEEK electrolyte films deliver high capacitance.

Lithiated and sulphonated poly(ether ether ketone) solid state electrolyte films for supercapacitors

International Nuclear Information System (INIS)

Chiu, K.-F.; Su, S.-H.

2013-01-01

Poly(ether ether ketone) (PEEK) films have been synthesised and used as solid-state electrolytes for supercapacitors. In order to increase their ion conductivity, the PEEK films were sulphonated by sulphuric acid, and various amounts of LiClO 4 were added. The solid-state electrolyte films were characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. The ionic conductivities of the electrolyte films were analysed by performing electrochemical impedance spectroscopy. The obtained electrolyte films can be sandwiched or directly coated on activated carbon electrodes to form solid-state supercapacitors. The electrochemical characteristics of these supercapacitors were investigated by performing cyclic voltammetry and charge–discharge tests. Under an optimal content of LiClO 4 , the supercapacitor can provide a capacitance as high as 190 F/g. After 1000 cycles, the supercapacitors show almost no capacitance fading, indicating high stability of the solid-state electrolyte films. - Highlights: • Poly(ether ether ketone) (PEEK) films have been used as solid-state electrolytes. • LiClO4 addition can efficiently improve the ionic conductivity. • Supercapacitors using PEEK electrolyte films deliver high capacitance

Radical cation spectroscopy of substituted alkyl phenyl ketones via tunnel ionization

Energy Technology Data Exchange (ETDEWEB)

Bohinski, Timothy; Moore Tibbetts, Katharine [Center for Advanced Photonics Research, Temple University, Philadelphia, PA 19122 (United States); Department of Chemistry, Temple University, Philadelphia, PA 19122 (United States); Munkerup, Kristin [Department of Chemistry, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen Ø (Denmark); Tarazkar, Maryam [Center for Advanced Photonics Research, Temple University, Philadelphia, PA 19122 (United States); Department of Chemistry, Temple University, Philadelphia, PA 19122 (United States); Romanov, Dmitri A. [Center for Advanced Photonics Research, Temple University, Philadelphia, PA 19122 (United States); Department of Physics, Temple University, Philadelphia, PA 19122 (United States); Matsika, Spiridoula [Department of Chemistry, Temple University, Philadelphia, PA 19122 (United States); Levis, Robert J., E-mail: rjlevis@temple.edu [Center for Advanced Photonics Research, Temple University, Philadelphia, PA 19122 (United States); Department of Chemistry, Temple University, Philadelphia, PA 19122 (United States)

2014-10-17

Highlights: • Infrared strong field spectroscopy on (o, m, p)-methylacetophenone was performed. • Electronic resonance in the radical cations at 1370 nm produces benzoyl fragment. • Magnitude of resonance feature increases from ortho to meta to para isomer. • Hydrogen interactions and moment of inertia account for the trend across isomers. - Abstract: Mass spectra are measured for 2′-, 3′- and 4′-(ortho, meta and para) methyl substituted alkyl phenyl ketones excited at wavelengths ranging from 1200 to 1500 nm in the strong field regime. The selective loss of a methyl group from the acetyl group of the parent molecular ion upon excitation at ∼1370 nm is attributed to an electronic resonance between ground D{sub 0} and excited D{sub 2} state of the radical cation. Depletion of the parent molecular ion is enhanced as the methyl substituent is moved from the 2′ to 3′ to 4′ position on the phenyl ring with respect to the acetyl group. The phenyl-acetyl dihedral angle is the relevant coordinate enabling excitation to the dissociative D{sub 2} state. Calculations on the radical cation of 2′-methylacetophenone show two stable geometries with dihedral angles of 7 degrees and 63 degrees between the phenyl and acetyl groups. The barrier to rotation for the 2′ isomer limits population transfer to the D{sub 2} state. In contrast, calculations on the radical cations of 3′- and 4′-methylacetophenone reveal no rotational barrier to prevent population transfer to the excited state, which is consistent with the enhanced dissociation yield in comparison with the 2′ substitution. The enhanced dissociation of the 4′ isomer as compared to the 3′ isomer is attributed to its lower moment of inertia about the dihedral angle.

New biphasic solvent system based on cyclopentyl methyl ether for the purification of a non-polar synthetic peptide by pH-zone refining centrifugal partition chromatography.

Science.gov (United States)

Amarouche, Nassima; Boudesocque, Leslie; Borie, Nicolas; Giraud, Matthieu; Forni, Luciano; Butte, Alessandro; Edwards, Florence; Renault, Jean-Hugues

2014-06-01

A new type 1 ternary biphasic system composed of cyclopentyl methyl ether, dimethylformamide and water was developed, characterized and successfully used for the purification of a lipophilic, protected peptide by pH-zone refining centrifugal partition chromatography. The protected peptide is an 8-mer, key intermediate in bivalirudin (Angiomax®) synthesis and shows a very low solubility in the solvents usually used in liquid chromatography. All ionic groups, except the N-terminal end of the peptide, are protected by a benzyl group. The purification of this peptide was achieved with a purity of about 99.04% and a recovery of 94% using the new ternary biphasic system cyclopentyl methyl ether/dimethylformamide/water (49:40:11, v/v) in the descending pH-zone refining mode with triethylamine (28 mM) as the retainer and methanesulfonic acid (18 mM) as the eluter. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hardness and wear properties of boron-implanted poly(ether-ether-ketone) and poly-ether-imide

International Nuclear Information System (INIS)

Lee Youngchul; Lee, E.H.; Mansur, L.K.

1992-01-01

The effects of boron beam irradiation on the hardness, friction, and wear of polymer surfaces were investigated. Typical high-performance thermoplastics, poly(ether-ether-ketone) (PEEK) and a poly-ether-imide (Ultem) were studied after 200 keV boron ion beam treatment at ambient temperature to doses of 2.3x10 14 , 6.8x10 14 , and 2.2x10 15 ions cm -2 . The hardnesses of pristine and boron-implanted materials were characterized by a conventional Knoop method and a load-depth sensing nanoindentation technique. Both measurements showed a significant increase in hardness with increasing dose. The increase in hardness was also found to depend on the penetration depth of the diamond indenter. Wear and friction properties were characterized by a reciprocating sliding friction tester with an SAE 52100 high-carbon, chrome steel ball at 0.5 and 1 N normal loads. Wear and frictional properties varied in a complex fashion with polymer type and dose, but not much with normal load. A substantial reduction in friction coefficient was observed for PEEK at the highest dose but no reduction was observed for Ultem. The wear damage was substantially reduced at the highest dose for both Ultem and PEEK. For the system studied, the highest dose, 2.2x10 15 ions cm -2 , appears to be optimum in improving wear resistance for both PEEK and Ultem. (orig.)

DFT study on the adsorption of diethyl, ethyl methyl, and dimethyl ethers on the surface of gallium doped graphene

Energy Technology Data Exchange (ETDEWEB)

Shokuhi Rad, Ali, E-mail: a.shokuhi@gmail.com [Department of Chemical Engineering, Qaemshahr Branch, Islamic Azad University, Qaemshahr (Iran, Islamic Republic of); Sani, Emad; Binaeian, Ehsan [Department of Chemical Engineering, Qaemshahr Branch, Islamic Azad University, Qaemshahr (Iran, Islamic Republic of); Peyravi, Majid; Jahanshahi, Mohsen [Faculty of Chemical Engineering, Babol University of Technology, Babol (Iran, Islamic Republic of)

2017-04-15

Highlights: • Adsorption of three ether molecules on the surface of Ga-doped graphene has been investigated. • High degree of adsorption for all analytes is found. • Ga-doped graphene shows p-type semiconductor property upon adsorption of ether molecules. - Abstract: In this study, we used density functional theory (DFT) to search on the adsorption properties of three important compounds of ether family; diethyl ether (DEE), ethyl methyl ether (EME), and dimethyl ether (DME) on the surface of Gallium doped graphene (GaG). We used three functionals (B3LYP, wb97xd, and MPW1PW91) for optimization and calculation of adsorption energy. After fully optimization, we scrutinized on the charge allocations on the adsorbed ethers as well as GaG (at the area of interaction) based on natural bond orbitals (NBO). Besides, we have calculated the amount of charge transfer upon adsorption of each analyte. We revel that GaG is an ideal adsorbent for chemisorption of all above-mentioned ethers. There is a little difference between the values of adsorption; −123.5, −120, and −118.3 kJ/mol (based on wb97xd) for DEE, EME, and DME, respectively. We found significant changes in the electronic structure of both adsorbent and adsorbate upon adsorption. Moreover, results of charge analyses confirm GaG is a p-type semiconductor.

DFT study on the adsorption of diethyl, ethyl methyl, and dimethyl ethers on the surface of gallium doped graphene

International Nuclear Information System (INIS)

Shokuhi Rad, Ali; Sani, Emad; Binaeian, Ehsan; Peyravi, Majid; Jahanshahi, Mohsen

2017-01-01

Highlights: • Adsorption of three ether molecules on the surface of Ga-doped graphene has been investigated. • High degree of adsorption for all analytes is found. • Ga-doped graphene shows p-type semiconductor property upon adsorption of ether molecules. - Abstract: In this study, we used density functional theory (DFT) to search on the adsorption properties of three important compounds of ether family; diethyl ether (DEE), ethyl methyl ether (EME), and dimethyl ether (DME) on the surface of Gallium doped graphene (GaG). We used three functionals (B3LYP, wb97xd, and MPW1PW91) for optimization and calculation of adsorption energy. After fully optimization, we scrutinized on the charge allocations on the adsorbed ethers as well as GaG (at the area of interaction) based on natural bond orbitals (NBO). Besides, we have calculated the amount of charge transfer upon adsorption of each analyte. We revel that GaG is an ideal adsorbent for chemisorption of all above-mentioned ethers. There is a little difference between the values of adsorption; −123.5, −120, and −118.3 kJ/mol (based on wb97xd) for DEE, EME, and DME, respectively. We found significant changes in the electronic structure of both adsorbent and adsorbate upon adsorption. Moreover, results of charge analyses confirm GaG is a p-type semiconductor.

Optical anisotropy, molecular orientations, and internal stresses in thin sulfonated poly(ether ether ketone) films

NARCIS (Netherlands)

Koziara, B.T.; Nijmeijer, K.; Benes, N.E.

2015-01-01

The thickness, the refractive index, and the optical anisotropy of thin sulfonated poly(ether ether ketone) films, prepared by spin-coating or solvent deposition, have been investigated with spectroscopic ellipsometry. For not too high polymer concentrations (≤5 wt%) and not too low spin speeds

Optical anisotropy, molecular orientations, and internal stresses in thin sulfonated poly(ether ether ketone) films

NARCIS (Netherlands)

Koziara, Beata; Nijmeijer, Dorothea C.; Benes, Nieck Edwin

2015-01-01

The thickness, the refractive index, and the optical anisotropy of thin sulfonated poly(ether ether ketone) films, prepared by spin-coating or solvent deposition, have been investigated with spectroscopic ellipsometry. For not too high polymer concentrations (B5 wt%) and not too low spin speeds

Improved Morphology and Efficiency of n-i-p Planar Perovskite Solar Cells by Processing with Glycol Ether Additives

KAUST Repository

Ugur, Esma

2017-07-31

Planar perovskite solar cells can be prepared without high temperature processing steps typically associated with mesoporous device architectures; however, their efficiency has been lower and producing high quality perovskite films in planar devices has been challenging. Here, we report a modified two-step interdiffusion protocol suitable to prepare pin-hole free perovskite films with greatly improved morphology. This is achieved by simple addition of small amounts of glycol ethers to the preparation protocol. We unravel the impact the glycol ethers have on the perovskite film formation using in-situ UV-Vis absorbance and GIWAXS experiments. From these experiments we conclude: addition of glycol ethers changes the lead iodide to perovskite conversion dynamics and enhances the conversion efficiency, resulting in more compact polycrystalline films, and it creates micrometer-sized perovskite crystals vertically-aligned across the photoactive layer. Consequently, the average photovoltaic performance increases from 13.5% to 15.9% and reproduciability is enhanced, specifically when 2-methoxyethanol is used as additive.

Improved Morphology and Efficiency of n-i-p Planar Perovskite Solar Cells by Processing with Glycol Ether Additives

KAUST Repository

Ugur, Esma; Sheikh, Arif D.; Munir, Rahim; Khan, Jafar Iqbal; Barrit, Dounya; Amassian, Aram; Laquai, Fré dé ric

2017-01-01

Planar perovskite solar cells can be prepared without high temperature processing steps typically associated with mesoporous device architectures; however, their efficiency has been lower and producing high quality perovskite films in planar devices has been challenging. Here, we report a modified two-step interdiffusion protocol suitable to prepare pin-hole free perovskite films with greatly improved morphology. This is achieved by simple addition of small amounts of glycol ethers to the preparation protocol. We unravel the impact the glycol ethers have on the perovskite film formation using in-situ UV-Vis absorbance and GIWAXS experiments. From these experiments we conclude: addition of glycol ethers changes the lead iodide to perovskite conversion dynamics and enhances the conversion efficiency, resulting in more compact polycrystalline films, and it creates micrometer-sized perovskite crystals vertically-aligned across the photoactive layer. Consequently, the average photovoltaic performance increases from 13.5% to 15.9% and reproduciability is enhanced, specifically when 2-methoxyethanol is used as additive.

Poly(vinylbenzyl sulfonic acid)-grafted poly(ether ether ketone) membranes

Energy Technology Data Exchange (ETDEWEB)

Hwang, Mi-Lim; Choi, Jisun; Woo, Hyun-Su; Kumar, Vinod; Sohn, Joon-Yong; Shin, Junhwa, E-mail: shinj@kaeri.re.kr

2014-02-15

Highlights: • PEEK-g-PVBSA, a polymer electrolyte membrane was prepared by a radiation grafting technique. • Poly(ether ether ketone) (PEEK), an aromatic hydrocarbon polymer was used as a grafting backbone film. • The water uptake, proton conductivity, and methanol permeability of the membranes were evaluated. • PEEK-g-PVBSA membranes show considerably lower methanol permeability compared to a Nafion membrane. -- Abstract: In this study, an aromatic hydrocarbon based polymer electrolyte membrane, poly(vinylbenzyl sulfonic acid)-grafted poly(ether ether ketone) (PEEK-g-PVBSA), has been prepared by the simultaneous irradiation grafting of vinylbenzyl chloride (VBC) monomer onto a PEEK film and subsequent sulfonation. Each chemical conversion was monitored by FT-IR and SEM–EDX instruments. The physicochemical properties including IEC, water uptake, proton conductivity, and methanol permeability of the prepared membranes were also investigated and found that the values of these properties increase with the increase of degree of grafting. It was observed that the IEC values of the prepared PEEK-g-PVBSA membranes with 32%, 58%, and 80% DOG values were 0.50, 1.05, and 1.22 meq/g while the water uptakes were 14%, 20%, and 21%, respectively. The proton conductivities (0.0272–0.0721 S/cm at 70 °C) were found to be somewhat lower than Nafion 212 (0.126 S/cm at 70 °C) at a relative humidity of 90%. However, the prepared membranes showed a considerably lower methanol permeability (0.61–1.92 × 10{sup −7} cm{sup 2}/s) compared to a Nafion 212 membrane (5.37 × 10{sup −7} cm{sup 2}/s)

Understanding the scale of the single ion free energy: A critical test of the tetra-phenyl arsonium and tetra-phenyl borate assumption

Science.gov (United States)

Duignan, Timothy T.; Baer, Marcel D.; Mundy, Christopher J.

2018-06-01

The tetra-phenyl arsonium and tetra-phenyl borate (TATB) assumption is a commonly used extra-thermodynamic assumption that allows single ion free energies to be split into cationic and anionic contributions. The assumption is that the values for the TATB salt can be divided equally. This is justified by arguing that these large hydrophobic ions will cause a symmetric response in water. Experimental and classical simulation work has raised potential flaws with this assumption, indicating that hydrogen bonding with the phenyl ring may favor the solvation of the TB- anion. Here, we perform ab initio molecular dynamics simulations of these ions in bulk water demonstrating that there are significant structural differences. We quantify our findings by reproducing the experimentally observed vibrational shift for the TB- anion and confirm that this is associated with hydrogen bonding with the phenyl rings. Finally, we demonstrate that this results in a substantial energetic preference of the water to solvate the anion. Our results suggest that the validity of the TATB assumption, which is still widely used today, should be reconsidered experimentally in order to properly reference single ion solvation free energy, enthalpy, and entropy.

Ethyl 2,6-bis(4-chlorophenyl-4-(4-methylanilino-1-(4-methylphenyl-1,2,5,6-tetrahydropyridine-3-carboxylate

Directory of Open Access Journals (Sweden)

Vivek K. Gupta

2013-03-01

Full Text Available In the title molecule, C34H32Cl2N2O2, the tetrahydropyridine ring adopts a distorted boat conformation and both 4-chlorophenyl substituents are in axial positions. An intramolecular N—H...O hydrogen bond is formed by the amino group and carbonyl O atom. In the crystal, weak C—H...Cl interactions link the molecules into chains along [010].

Thermal stability of sulfonated Poly(Ether Ether Ketone) films : on the role of Protodesulfonation

NARCIS (Netherlands)

Koziara, B.T.; Kappert, E.J.; Ogieglo, W.; Nijmeijer, Kitty; Hempenius, M.A.; Benes, N.E.

Thin film and bulk, sulfonated poly(ether ether ketone) (SPEEK) have been subjected to a thermal treatment at 160–250 °C for up to 15 h. Exposing the films to 160 °C already causes partial desulfonation, and heating to temperatures exceeding 200 °C results in increased conjugation in the material,

Absorption and emission spectroscopic characterization of 10-phenyl-isoalloxazine derivatives

International Nuclear Information System (INIS)

Shirdel, J.; Penzkofer, A.; Prochazka, R.; Daub, J.; Hochmuth, E.; Deutzmann, R.

2006-01-01

The flavoquinone dyes 10-phenyl-isoalloxazine-3-acetic acid ethyl ester (1) and 10-(4-bromo-phenyl)-3-methyl-isoalloxazine (2) in dichloromethane, acetonitrile, and methanol are characterized by absorption and emission spectroscopy. Absorption cross-section spectra, stimulated emission cross-section spectra, fluorescence quantum distributions, quantum yields, lifetimes, and degrees of fluorescence polarization are determined. The blue-light photo-degradation of the dyes is studied. Mass spectroscopic measurements reveal the formation of phenyl-benzo-pteridine (isoalloxazine) derivatives, tetraaza-benzo-aceanthrylene derivatives, dihydro-quinooxaline derivatives, and pyrazino-carbazole derivatives. An enhancement of photo-degradation is observed by the formed photo-fragments

Synthesis and characterization of sulfonated cardo poly(arylene ether sulfone)s for fuel cell proton exchange membrane application

Energy Technology Data Exchange (ETDEWEB)

Islam, M.M.; Jang, H.H.; Lim, Y.D.; Seo, D.W.; Kim, W.G. [Department of Applied Chemistry, Konkuk University, Chungju, Chungbuk (Korea, Republic of); Kim, T.H.; Hong, Y.T. [Energy Material Research Center, Korea Research Institute of Chemical Technology, Daejeon (Korea, Republic of); Kim, D.M. [Material Engineering and Science, Hongik Univ, Jochiwon-eup, Yeongi-gun, Chungnam (Korea, Republic of)

2012-12-15

Sulfonated cardo poly(arylene ether sulfone)s (SPPA-PES) with various degrees of sulfonation (DS) were prepared by post-sulfonation of synthesized phenolphthalein anilide (PPA; N-phenyl-3,3'-bis(4-hydroxyphenyl)-1-isobenzopyrolidone) poly(arylene ether sulfone)s (PPA-PES) by using concentrated sulfuric acid. PPA-PES copolymers were synthesized by direct polycondensation of PPA with bis-(4-fluorophenyl)-sulfone and 4,4'-sulfonyldiphenol. The DS was varied with different mole ratios of PPA (24, 30, 40, 50 mol.%) in the polymer. The structure of the resulting SPPA-PES copolymers and the different contents of the sulfonated unit were studied by Fourier transform infrared (FT-IR) spectroscopy, {sup 1}H NMR spectroscopy, and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymer with water. The ion exchange capacity (IEC) and proton conductivity of SPPA-PES were evaluated according to the increase of DS. The water uptake (WU) of the resulting SPPA-PES membranes was in the range of 20-72%, compared with 28% for Nafion 211 registered. The SPPA-PES membranes showed proton conductivities of 23-82 mS cm{sup -1}, compared with 194 mS cm{sup -1} for Nafion 211 registered, under 100% relative humidity (RH) at 80 C. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Synthesis of Novel Antibacterial Agents: 1-(2', 4'-Dihydroxy-5'-chlorophenyl-3-arylpropane-1, 3-Diones

Directory of Open Access Journals (Sweden)

J. I. Sheikh

2009-01-01

Full Text Available 1-(2', 4'-Dihydroxy-5'-chlorophenyl-3-arylpropane-1, 3-diones(3a-h have been synthesized by a simple and convenient method employing Baker-Venkatraman transformation on 2-aroyloxy-4-hydroxy-5-chloroacetophenones (2a-h with NaOH in dimethylsuphoxide regardless of pyridine. The structures of the synthesized compounds have been assigned on the basis of elemental and spectral analyses (IR, 1HNMR, 13C NMR, Mass. The synthesized compounds were evaluated for the antibacterial efficacy against gram negative and gram positive bacteria.

Phenyl thiazolyl urea and carbamate derivatives as new inhibitors of bacterial cell-wall biosynthesis.

Science.gov (United States)

Francisco, Gerardo D; Li, Zhong; Albright, J Donald; Eudy, Nancy H; Katz, Alan H; Petersen, Peter J; Labthavikul, Pornpen; Singh, Guy; Yang, Youjun; Rasmussen, Beth A; Lin, Yang-I; Mansour, Tarek S

2004-01-05

Over 50 phenyl thiazolyl urea and carbamate derivatives were synthesized for evaluation as new inhibitors of bacterial cell-wall biosynthesis. Many of them demonstrated good activity against MurA and MurB and gram-positive bacteria including MRSA, VRE and PRSP. 3,4-Difluorophenyl 5-cyanothiazolylurea (3p) with clog P of 2.64 demonstrated antibacterial activity against both gram-positive and gram-negative bacteria.

On new physical reality (on ψ-ether)

International Nuclear Information System (INIS)

Isaev, P.S.

2002-01-01

It is shown that there exists a new physical reality - the ψ-ether. All the achievements of quantum mechanics and quantum field theory are due to the fact that both the theories include the influence of ψ-ether on the physical processes occurring in the Universe. Physics of the XX century was first of all the physics of ψ-ether

Synthesis and Antiplasmodial Activity of 2-(4-Methoxyphenyl-4-Phenyl-1,10-Phenanthroline Derivative Compounds

Directory of Open Access Journals (Sweden)

Nazudin

2012-08-01

Full Text Available A unique of synthetic methods was employed to prepare 2-(4-methoxyphenyl-4-phenyl-1,10-phenanthroline (5 derivatives from 4-methoxy-benzaldehyde (1, acetophenone (2, and 8-aminoquinoline (4 with aldol condensation and cyclization reactions. The derivatives were tested through antiplasmodial test. The synthesis of derivatives compound 5 was conducted in three steps. The 3-(4-methoxyphenyl-1-phenylpropenone 3 was synthesized through aldol condensation of 1 and 2 which has a yield of 96.42%. The compound 5 was synthesized through cyclization of compound 4 and 3 with 84.55% yield. The derivative of compound 5 was synthesized from compound 5 using DMS and DES reagents which refluxed for 21 and 22 h, to produce (1-N-methyl-9-(4-methoxyphenyl-7-phenyl-1,10-phenanthrolinium sulfate (6 and (1-N-ethyl-9-(4-methoxyphenyl-7-phenyl-1,10-phenanthrolinium sulfate (7 with 91.42 and 86.36% yields, respectively. Results of in vitro testing of antiplasmodial activity of compound 5 derivatives (i.e., compound 6 and 7 against chloroquine-resistant P. falciparum FCR3 strain showed that compound 7 had higher antimalarial activity than compounds 5 and 6. Whereas, results of in vitro testing against chloroquine-sensitive P. falciparum D10 strain showed that compound 6 has higher antimalarial activity than compounds 5 and 7.

Induction of micronuclei and other nuclear abnormalities in mussels exposed to bisphenol A, diallyl phthalate and tetrabromodiphenyl ether-47

International Nuclear Information System (INIS)

Barsiene, Janina; Syvokiene, Janina; Bjornstad, Anne

2006-01-01

Analysis of micronuclei, nuclear buds, bi-polynucleated and fragmented-apoptotic cells was performed in gills of blue mussels exposed for 3 weeks to sublethal concentrations of bisphenol A, diallyl phthalate (for the both nominal concentration 50 ppb) and to tetrabromodiphenyl ether-47 (nominal concentration 5 ppb). Fourteen specimens from each treatment and control group were used for the analysis. Our results demonstrated a significant increase in micronuclei frequency after the treatment with bisphenol A (P = 0.0243), diallyl phthalate (P = 0.0005) and tetrabromodiphenyl ether-47 (P < 0.0001; Mann-Whitney U-test). Induction of bi-nucleated (P = 0.0028), fragmented-apoptotic (P = 0.0004) cells and nuclear buds (P = 0.0101) was found in mussels exposed to tetrabromodiphenyl ether-47 while treatment with diallyl phthalate increased the level of fragmented-apoptotic cells (P = 0.0283). Bisphenol A was the only agent that resulted only in induction of micronuclei but not any other kind of nuclear injuries

Biodegradability of fuel-ethers in environment; Biodegradabilite des ethers-carburants dans l'environnement

Energy Technology Data Exchange (ETDEWEB)

Fayolle-Guichard, F

2005-04-01

Fuel ethers (methyl tert-butyl ether or MTBE, ethyl tert-butyl ether or ETBE and tert-amyl methyl ether or TAME have been used as gasoline additives since about twenty years in order to meet the requirements for the octane index and to limit the polluting emission in exhaust pipe gas (unburnt hydrocarbons and carbon monoxide). The high water solubility and the poor biodegradability of these compounds make them pollutants frequently encountered in aquifers. The present manuscript summarizes the knowledge concerning the biodegradability of fuel ethers obtained both at IFP and during collaborations with the Pasteur Institute (Paris), the Biotechnology Research Institute (Montreal, Canada) and the Center for Environmental Biotechnology (University of Tennessee, USA). Rhodococcus ruber IFP 2001 and Mycobacterium austroafricanum IFP 2012, two microorganisms isolated at IFP for their ability to grow, respectively, on ETBE and MTBE, were studied in order to determine the intermediates produced during MTBE and ETBE biodegradation and the enzymes required for each biodegradation step, thus allowing us to propose MTBE and ETBE catabolic pathways. A proteomic approach, from the protein induced during the degradation of ETBE or MTBE to the genes encoding these different enzymes, was carried out. The isolation of such genes is required:1) to use them for help in determining the bio-remediation capacities in polluted aquifers (DNA micro-arrays), 2) to monitor the microorganisms isolated for their degradative capacities during bio-remediation processes (fluorescent in situ hybridization or FISH) and 3) to create new tools for the detection and the quantification of ETBE or MTBE in contaminated aquifers (bio-sensor). The manuscript also describes the different ways for the adaptation of microorganisms to the presence of a xenobiotic compound. (author)

Migration of methyl and phenyl radicals, oxygen and sulphur atoms in certain diphenylthiophosphorane derivatives under electron impact

International Nuclear Information System (INIS)

Cauquis, G.; Divisia, B.; Ulrich, J.

The fragmentation of various diphenylthiophosphoranes (Ph 2 P(S)R) subjected to electron impact gives rise to rearrangements dependent on the nature of the radical R. Migrations of phenyl or methyl radicals from phosphorus towards sulphur were thus observed for R=Ph, CH 3 , CH 2 Ph and NH 2 . When an electrophilic centre is formed, during a fragmentation, on a carbon in the α-position of the diphenylthiophosphoranyl radical, migrations of sulphur atoms and phenyl radicals take place from the phosphorus towards the carbon. This is found to be the case with certain fragmentations of diazo 5 and 6 compounds [fr

6-Bromo-2-(4-chlorophenyl-3-methyl-3H-imidazo[4,5-b]pyridine

Directory of Open Access Journals (Sweden)

Selma Bourichi

2016-05-01

Full Text Available In the title compound, C13H9BrClN3, the imidazopyridine fused-ring system is almost planar, with r.m.s. deviation of 0.006 (19 Å, and makes a dihedral angle of 29.32 (8° with the mean plane of the 4-chlorophenyl group. In the crystal, C—H...N hydrogen bonds link the molecules into chains propagating in the [100] direction. Weak intermolecular π–π interactions between the five- and six-membered rings of the 3H-imidazo[4,5-b]pyridine moieties of neighbouring molecules [centroid–centroid distance = 3.8648 (12 Å] further consolidate the packing into layers parallel to the ab plane.

High Resolution Rotational Spectroscopy of a Flexible Cyclic Ether

Science.gov (United States)

Gámez, F.; Martínez-Haya, B.; Blanco, S.; López, J. C.; Alonso, J. L.

2011-06-01

Crown ethers stand as one cornerstone molecular class inhost-guest Supramolecular Chemistry and constitute building blocks for a broad range of modern materials. We report here the first high resolution rotational study of a crown ether: 1,4,7,10,13-pentaoxacyclopentadecane (15-crown-5 ether,15c5). Molecular beam Fourier transform microwave spectroscopy has been employed. The liquid sample of 15c5 has been vaporized using heating methods. The considerable size of 15c5 and the broad range of conformations allowed by the flexibility of its backbone pose important challenges to spectroscopy approaches. In fact, the ab-initio computational study for isolated 15c5, yields at least six stable conformers with relative free energies within 2 kJ Mol-1 (167 Cm-1). Nevertheless, in this investigation it has been possible to identify and characterize in detail one stable rotamer of the 15c5 molecule and to challenge different quantum methods for the accurate description of this system. The results pave the ground for an extensive description of the conformational landscape of 15c5 and related cyclic ethers in the near term. J. L. Alonso, F. J. Lorenzo, J. C. López, A. Lesarri, S. Mata and H. Dreizler, Chem. Phys., 218, 267 (1997) S. Blanco, J.C López, J.L. Alonso, P. Ottaviani, W. Caminati, J. Chem. Phys. 119, 880 (2003) S.E. Hill, D. Feller, Int. J. Mass Spectrom. 201, 41 (2000)

Sulfonated poly(ether ether ketone) membranes for electric double layer capacitors

International Nuclear Information System (INIS)

Kim, Wan Ju; Kim, Dong-Won

2008-01-01

Sulfonated poly(ether ether ketone) (S-PEEK) with different degree of sulfonation (DS) has been prepared and evaluated as a proton conducting membrane for electric double layer capacitor (EDLC). The polymer electrolytes prepared with S-PEEK membrane exhibited ionic conductivities about 1.2 x 10 -3 -4.5 x 10 -3 S cm -1 at room temperature, which depended on both soaking solvent and degree of sulfonation. The quasi-solid-state EDLCs consisted of activated carbon electrodes and S-PEEK membrane were assembled, and their electrochemical characteristics were studied by cyclic voltammetry and charge-discharge cycle tests. The effect of DS on the electrochemical performances of EDLCs has been investigated

Interactions between stacked layers of phenyl-modified silicene

International Nuclear Information System (INIS)

Spencer, Michelle J S; Snook, Ian K; Bassett, Michael R; Morishita, Tetsuya; Nakano, Hideyuki

2013-01-01

We use density functional theory (DFT) calculations to determine the interaction between phenyl-modified silicene nanosheets. The adhesion energy curves between the nanosheets are compared for different van der Waals density functional (vdW-DF) functionals and the DFT-D2 Grimme method. Our results show that there is a weak attraction between the sheets at close separations, that is stronger when vdWs forces are included. Without including vdWs forces the interaction is negligible and occurs at a much larger separation, highlighting the need to include such forces when modelling these nanosheets. Of the vdWs methods, the optB88 functional gives the strongest interaction energy while the Grimme gives the weakest, with the separation at which the nanosheets adhere more strongly varying between 10.04 and 11.24 Å, as measured by the distance between the silicene layers. As the modified nanosheets are brought closer together at separations as close at  ∼ 8 Å, the phenyl groups on the bottom of one nanosheet can fit in between the phenyl groups on the top of the adjacent nanosheet allowing some π − π interaction between the phenyl groups. We showed that the band gap can be modified by compressing the nanosheets together while retaining a small attraction between them. There is also a change from a direct to an indirect band gap. Such a property may be exploited for the application of these nanomaterials in optoelectronic devices. (paper)

Kinetic α secondary deuterium isotope effects for O-ethyl S-phenyl benzaldehyde acetal hydrolysis

International Nuclear Information System (INIS)

Ferraz, J.P.; Cordes, E.H.

1979-01-01

The rate of hydrolysis of O-ethyl S-phenyl benzaldehyde acetal at 25 0 C in 20% dioxane--80% water is independent of pH over the range pH6-12; k/sub obsd/ = 1.9 x 10 -7 s -1 . Under more acidic conditions, the rate increases linearly with the activity of the hydrated proton; k 2 = 2.95 x 10 -2 M -1 s -1 . The kinetic α secondary deuterium isotope effect for acid-catalyzed hydrolysis of O-ethyl S-phenyl benzaldehyde acetal, measured at 25 0 C in 20% aqueous dioxane containing 0.05 M HCl, is k/sub H//k/sub D/ = 1.038 +- 0.008, a value consistent with a transition state in which the C--S bond is stretched rather little. In contrast, the corresponding isotope effect for the pH-independent hydrolysis of this substrate, measured at 42.5 0 C in 20% dioxane, is 1.13 +- 0.02, a value consistent with complete C--S bond cleavage in the transition state and rate-determining diffusion apart of the ion-pair formed as the initial intermediate, in accord with the suggestion of Jensen and Jencks. 1 figure, 4 tables

Promoting environmentally sound management of polybrominated diphenyl ethers in Asia.

Science.gov (United States)

Li, Jinhui; Zhao, Nana; Liu, Xue; Wu, Xiaoyang

2014-06-01

Polybrominated diphenyl ethers with persistent organic pollutant properties are required to be controlled by the Stockholm Convention. Recently, polybrominated diphenyl ether contamination has become widespread in Asia, mainly because of the disposal and recycling processes of polybrominated diphenyl ether-containing wastes. The management status, production, usage, import/export, treatment, and disposal, as well as implementation deficiencies for the environmentally sound management of polybrominated diphenyl ethers and polybrominated diphenyl ether-containing materials in ten Asian countries were investigated and assessed in this study. This information could help the participating countries implement the Stockholm Convention and could promote the regional environmentally sound management of polybrominated diphenyl ether-containing articles and products. The results obtained were as follows. (1) Most of the countries studied lacked environmental policies and regulations, or even standards of polybrominated diphenyl ether pollution management and emission control actions. Accurate data on the consumption and importation of polybrominated diphenyl ether-containing materials, however, were not available for all the participating countries. In addition, there were no special treatment or disposal systems for polybrominated diphenyl ether-containing materials, or emission-cutting measures for the treatment of waste in these countries, owing to the lack of sufficient funding or technologies. (2) The improper dismantling of e-waste is a major source of polybrominated diphenyl ether emissions in these countries. (3) Proper e-waste management could result in a breakthrough in the environmentally sound management of this major polybrominated diphenyl ether-containing material flow, and could significantly reduce polybrominated diphenyl ether emissions. Finally, based on the study results, this article puts forward some recommendations for improving the environmentally

Synthesis, characterization, crystal structures and DFT studies of some new 1,2,4-triazole and triazolidin derivatives

Science.gov (United States)

Abosadiya, Hamza M.; Anouar, El Hassane; Abusaadiya, Salima M.; Hasbullah, Siti Aishah; Yamin, Bohari M.

2018-01-01

A simple efficient method for synthesis of some new 1,2,4-Triazole and Triazolidin derivatives namely, 5-(4-methoxyphenyl)-2-phenyl-2,4-dihydro-3H-1,2,4-triazole-3-thione (1a), (2-chlorophenyl)(3,3-dimethyl-1-phenyl-5-thioxo-1,2,4-triazolidin-4-yl)methanone (1b) and (2-iodophenyl)(3,3-dimethyl-1-phenyl-5-thioxo-1,2,4-triazolidin-4-yl)methanone (1c) have been synthesized in high yields from the reaction of carbonoyl isothiocyanate with phenyl hydrazine. The final products were characterized by FT-IR, 1H and 13C NMR spectroscopic techniques. X-ray crystallographic studies showed that 1a crystallized in triclinic crystal system with space group Pī, while both 1b and 1c crystallized in orthorhombic crystal system with space group Pna21. The asymmetric unit of 1a consists two crystallographically independent molecules, while only one molecule in asymmetric unit for both 1b and 1c compounds. All molecules possess Csbnd H ….S intramolecular hydrogen bonds which formed a pseudo-six-membered ring. Experimental results have been confirmed by the state-of-art density functional theory (DFT) in gas and solvent phase by using five different hybrid functionals B3LYP, B3P86, CAM-B3LYP, M06-2X and PBE0 combined with 6-311++G(d, p) basis set. The experimental data are relatively well produced, and relatively good correlations are obtained between the predicted and experimental data.

Ion-exchange composite membranes pore-filled with sulfonated poly(ether ether ketone) and Engelhard titanosilicate-10 for improved performance of vanadium redox flow batteries

Science.gov (United States)

Kim, Jihoon; Lee, Yongkyu; Jeon, Jae-Deok; Kwak, Seung-Yeop

2018-04-01

A series of ion-exchange membranes for vanadium redox flow batteries (VRBs) are prepared by filling the pores of a poly(tetrafluoroethylene) (PTFE) substrate with sulfonated poly(ether ether ketone) (SPEEK) and microporous Engelhard titanosilicate-10 (ETS-10). The effects of ETS-10 incorporation and PTFE reinforcement on membrane properties and VRB single-cell performance are investigated using various characterization tools. The results show that these composite membranes exhibit improved mechanical properties and reduced vanadium-ion permeabilities owing to the interactions between ETS-10 and SPEEK, the suppressed swelling of PTFE, and the unique ETS-10 framework. The composite membrane with 3 wt% ETS-10 (referred to as "SE3/P") exhibits the best membrane properties and highest ion selectivity. The VRB system with the SE3/P membrane exhibits higher cell capacity, higher cell efficiency, and lower capacity decay than that with a Nafion membrane. These results indicate that this composite membrane has potential as an alternative to Nafion in VRB systems.

Crystal structure of 2-[4(E-2,6-bis(4-chlorophenyl-3-ethylpiperidin-4-ylidene]acetamide

Directory of Open Access Journals (Sweden)

K. Priya

2015-11-01

Full Text Available In the title piperidine derivative, C21H22Cl2N2O, the piperidine ring adopts a chair conformation. The chlorophenyl rings are oriented at an angle of 45.59 (14° with respect to each other. In the crystal, molecules are linked via N—H...O hydrogen bonds, forming C(4 chains along [100]. The chains are linked by C—H...O hydrogen bonds, forming sheets parallel to the ab plane. Within the sheets, there are N—H...π interactions present. The crystal studied was refined as an inversion twin.

Chemoselective Deprotection of Triethylsilyl Ethers

Science.gov (United States)

Chandra, Tilak; Broderick, William E.; Broderick, Joan B.

2009-01-01

An efficient and selective method was developed for the deprotection of triethylsilyl (TES) ethers using formic acid in methanol (5–10%) or in methylene chloride 2–5%) with excellent yields. TES ethers are selectively deprotected to the corresponding alcohols in high yields using formic acid in methanol under mild reaction conditions. Other hydroxyl protecting groups like t-butyldimethylsilyl (TBDMS) remain unaffected. PMID:20183570

[Early contributions from Erlangen to the theory and practice of ether and chloroform anesthesia. 1. Heyfelder's clinical trial with ether and chloroform].

Science.gov (United States)

Hintzenstern, U v; Schwarz, W

1996-02-01

The era of modern anaesthesia in Germany began on January 24th, 1847. This day, professor in ordinary Johann Ferdinand Heyfelder anaesthetized a patient with sulphuric ether in the clinic of surgery and ophthalmology of the University of Erlangen. By March 17th, 1847, Heyfelder had performed 121 surgical procedures under ether. The operations in majority were teeth-extractions, and a few more complex operations such as the treatment of a harelip or of lip cancer or the resection of the shoulder joint. Heyfelder described in detail 108 of these inhalations in a little book entitled The experiments with sulphuric ether. This monograph published in March, 1847, represents one of the first complete dissertations on sulphuric ether in the German literature. In a special chapter he analyzed the development of various physiological and psychological parameters during etherization. Heyfelder also examined blood and urine of some etherized patients and reported that he did not find any important or specific alterations. In 1847, Heyfelder was probably the first to apply salt-ether in man. After 4 administrations he concluded that salt ether acted more quickly but shorter than sulphuric ether. Advantageous were its application without problems and ease of induction. Disadvantageous were its high volatility, its price and the difficulty of getting it in a pure form. From December, 1847, on Heyfelder started to use chloroform. He was now able to perform more major operations, for example, the total resection of the hip-joint. In his book The experiments with sulphuric ether, salt ether, and chloroform he describes a great number of anaesthetic administrations using these 3 agents. In his summary Heyfelder concluded, that chloroform was undoubtly superior to sulphuric ether mainly because it was a quicker acting and longer lasting agent and leads to deeper narcosis. Moreover its application was much easier for it needed no special apparatus. However, because of its great

Molecular structure impacts on secondary organic aerosol formation from glycol ethers

Science.gov (United States)

Li, Lijie; Cocker, David R.

2018-05-01

Glycol ethers, a class of widely used solvents in consumer products, are often considered exempt as volatile organic compounds based on their vapor pressure or boiling points by regulatory agencies. However, recent studies found that glycol ethers volatilize at ambient conditions nearly as rapidly as the traditional high-volatility solvents indicating the potential of glycol ethers to form secondary organic aerosol (SOA). This is the first work on SOA formation from glycol ethers. The impact of molecular structure, specifically -OH, on SOA formation from glycol ethers and related ethers are investigated in the work. Ethers with and without -OH, with methyl group hindrance on -OH and with -OH at different location are studied in the presence of NOX and under "NOX free" conditions. Photooxidation experiments under different oxidation conditions confirm that the processing of ethers is a combination of carbonyl formation, cyclization and fragmentation. Bulk SOA chemical composition analysis and oxidation products identified in both gas and particle phase suggests that the presence and location of -OH in the carbon bond of ethers determine the occurrence of cyclization mechanism during ether oxidation. The cyclization is proposed as a critical SOA formation mechanism to prevent the formation of volatile compounds from fragmentation during the oxidation of ethers. Glycol ethers with -CH2-O-CH2CH2OH structure is found to readily form cyclization products, especially with the presence of NOx, which is more relevant to urban atmospheric conditions than without NOx. Glycol ethers are evaluated as dominating SOA precursors among all ethers studied. It is estimated that the contribution of glycol ethers to anthropogenic SOA is roughly 1% of the current organic aerosol from mobile sources. The contribution of glycol ethers to anthropogenic SOA is roughly 1% of the current organic aerosol from mobile sources and will play a more important role in future anthropogenic SOA

Modified nanocrystal cellulose/fluorene-containing sulfonated poly(ether ether ketone ketone) composites for proton exchange membranes

Science.gov (United States)

Wei, Yingcong; Shang, Yabei; Ni, Chuangjiang; Zhang, Hanyu; Li, Xiaobai; Liu, Baijun; Men, Yongfeng; Zhang, Mingyao; Hu, Wei

2017-09-01

Highly sulfonated poly(ether ether ketone ketone)s (SFPEEKKs) with sulfonation degrees of 2.34 (SFPEEKK5) and 2.48 (SFPEEKK10) were synthesized through the direct sulfonation of a fluorene-containing poly(ether ether ketone ketone) under a relatively mild reaction condition. Using the solution blending method, sulfonated nanocrystal cellulose (sNCC)-enhanced SFPEEKK composites (SFPEEKK/sNCC) were successfully prepared for investigation as proton exchange membranes. Transmission electron microscopy showed that sNCC was uniformly distributed in the composite membranes. The properties of the composite membranes, including thermal stability, mechanical properties, water uptake, swelling ratio, oxidative stability and proton conductivity were thoroughly evaluated. Results indicated that the insertion of sNCC could contribute to water management and improve the mechanical performance of the membranes. Notably, the proton conductivity of SFPEEKK5/sNCC-5 was as high as 0.242 S cm-1 at 80 °C. All data proved the potential of SFPEEKK/sNCC composites for proton exchange membranes in medium-temperature fuel cells.

p,p′-DDE Induces Apoptosis of Rat Sertoli Cells via a FasL-Dependent Pathway

Directory of Open Access Journals (Sweden)

Yuqin Shi

2009-01-01

Full Text Available One,1-dichloro-2,2 bis(p-chlorophenyl ethylene (p,p′-DDE, the major metabolite of 2,2-bis(4-Chlorophenyl-1,1,1-trichloroethane (DDT, is a known persistent organic pollutant and male reproductive toxicant. It has antiandrogenic effect. However, the mechanism by which p,p′-DDE exposure causes male reproductive toxicity remains unknown. In the present study, rat Sertoli cells were used to investigate the molecular mechanism involved in p,p′-DDE-induced toxicity in male reproductive system. The results indicated that p,p′-DDE exposure at over 30 μM showed the induction of apoptotic cell death. p,p′-DDE could induce increases in FasL mRNA and protein, which could be blocked by an antioxidant agent, N-acetyl-l-cysteine (NAC. In addition, caspase-3 and -8 were activated by p,p′-DDE treatment in these cells. The activation of NF-κB was enhanced with the increase of p,p′-DDE dose. Taken together, these results suggested that exposure to p,p′-DDE might induce apoptosis of rat Sertoli cells through a FasL-dependent pathway.

Nanocomposite Based on Functionalized Gold Nanoparticles and Sulfonated Poly(ether ether ketone Membranes: Synthesis and Characterization

Directory of Open Access Journals (Sweden)

Iole Venditti

2017-03-01

Full Text Available Gold nanoparticles, capped by 3-mercapto propane sulfonate (Au-3MPS, were synthesized inside a swollen sulfonated poly(ether ether ketone membrane (sPEEK. The formation of the Au-3MPS nanoparticles in the swollen sPEEK membrane was observed by spectroscopic and microscopic techniques. The nanocomposite containing the gold nanoparticles grown in the sPEEK membrane, showed the plasmon resonance λmax at about 520 nm, which remained stable over a testing period of three months. The size distribution of the nanoparticles was assessed, and the sPEEK membrane roughness, both before and after the synthesis of nanoparticles, was studied by AFM. The XPS measurements confirm Au-3MPS formation in the sPEEK membrane. Moreover, AFM experiments recorded in fluid allowed the production of images of the Au-3MPS@sPEEK composite in water at different pH levels, achieving a better understanding of the membrane behavior in a water environment; the dynamic hydration process of the Au-3MPS@sPEEK membrane was investigated. These preliminary results suggest that the newly developed nanocomposite membranes could be promising materials for fuel cell applications.

Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate

International Nuclear Information System (INIS)

Zhang, G.; Leparoux, S.; Liao, H.; Coddet, C.

2006-01-01

In this paper, the feasibility of microwave (MW) sintering PEEK (poly-ether-ether-ketone) based coatings was investigated. Three coatings were studied: pure PEEK, micron-SiC and nano-SiC particles filled (wt.10%) PEEK coatings. The results indicate that, for the two composite coatings, the SiC particles distributed in the polymer matrix, as a good MW susceptor, could be heated preferentially by MW radiation. Consequently, the polymer matrix was heated by these particles

Biodegradability of fuel-ethers in environment; Biodegradabilite des ethers-carburants dans l'environnement

Energy Technology Data Exchange (ETDEWEB)

Fayolle-Guichard, F.

2005-04-01

Fuel ethers (methyl tert-butyl ether or MTBE, ethyl tert-butyl ether or ETBE and tert-amyl methyl ether or TAME have been used as gasoline additives since about twenty years in order to meet the requirements for the octane index and to limit the polluting emission in exhaust pipe gas (unburnt hydrocarbons and carbon monoxide). The high water solubility and the poor biodegradability of these compounds make them pollutants frequently encountered in aquifers. The present manuscript summarizes the knowledge concerning the biodegradability of fuel ethers obtained both at IFP and during collaborations with the Pasteur Institute (Paris), the Biotechnology Research Institute (Montreal, Canada) and the Center for Environmental Biotechnology (University of Tennessee, USA). Rhodococcus ruber IFP 2001 and Mycobacterium austroafricanum IFP 2012, two microorganisms isolated at IFP for their ability to grow, respectively, on ETBE and MTBE, were studied in order to determine the intermediates produced during MTBE and ETBE biodegradation and the enzymes required for each biodegradation step, thus allowing us to propose MTBE and ETBE catabolic pathways. A proteomic approach, from the protein induced during the degradation of ETBE or MTBE to the genes encoding these different enzymes, was carried out. The isolation of such genes is required:1) to use them for help in determining the bio-remediation capacities in polluted aquifers (DNA micro-arrays), 2) to monitor the microorganisms isolated for their degradative capacities during bio-remediation processes (fluorescent in situ hybridization or FISH) and 3) to create new tools for the detection and the quantification of ETBE or MTBE in contaminated aquifers (bio-sensor). The manuscript also describes the different ways for the adaptation of microorganisms to the presence of a xenobiotic compound. (author)

Chemistry of the pyrazolidines. 26. Alkylation of 4-benzyliden-1-phenyl-3,5-dioxopyrazolidines

International Nuclear Information System (INIS)

Moldarev, B.L.; Aronzon, M.E.; Adanin, V.M.; Zyakun, A.M.

1986-01-01

The reaction of 4-benzyliden-1-phenyl-3,5-dioxopyrazolidines with alkyl halides in the presence of sodium alkoxide gave 1-phenyl-2-alkyl-4-benzyliden- and 1-phenyl-2,4-dialkyl-4-(α-alkoxybenzyl)-3,4-dioxopyrazolines. The structures of these compounds were confirmed by UV, IR, and PMR spectroscopy, and by mass-spectrometry

Actinide/crown ether chemistry

International Nuclear Information System (INIS)

Benning, M.M.

1988-01-01

A structural survey of actinide/crown ether compounds was conducted in order to investigate the solid state chemistry of these complexes. Several parameters - the metal size, crown type, counterion, solvent systems and reaction and crystallization conditions - were varied to correlate their importance in complexation. Under atmospheric conditions, two types of complexes were isolated, those containing only hydrogen-bonded crown interactions and instances where the crown interacts directly with the metal center. In both cases, water seems to play a very important role. When coordinated to the metal, water molecules exhibit the necessary donor properties required for the formation of hydrogen-bonded contacts. The water molecules also provide fierce competition with the crown ethers for metal-binding sites and in most cases prohibit the formation of complexes in which direct metal-ligand association exists. The results of this study indicate that direct interaction between the metal atoms and the crown ethers, in the presence of water, can only occur with polyether conformations which limit the steric replusions within the metal coordination sphere

An Efficient Synthesis of New Pyrazolines and Isoxazolines Bearing Thiazolyl and Etheral Pharmacophores

Energy Technology Data Exchange (ETDEWEB)

Bhosle, Manisha R.; Mali, Jyotirling R.; Pratap, Umesh R.; Mane, Ramrao A. [Ambedkar Marathwada University, Aurangabad (India)

2012-06-15

A convenient synthetic route has been developed to synthesize 5-(4-((2-phenylthiazol-4-yl) methoxy)phenyl)- 3-(4-sustituted phenyl)pyrazolines (5a-f) and 5-(4-((2-phenylthiazol-4-yl)methoxy)phenyl)-3-(4-substituted phenyl)isoxazolines (6a-f) starting from 2-phenyl-4-chloromethylthiazole (1). The chloromethylthiazole (1) was first condensed with 4-hydroxy benzaldehyde (2) for obtaining 4-((2-phenylthiazol-4-yl)methoxy)benzaldehyde (3). Claisen-Smidth condensation of 4-((2-phenylthiazol-4-yl)methoxy)benzaldehyde (3) and acetophenones has been carried in alkaline alcohol and obtained 3-(4-((2-phenylthiazol-4-yl)methoxy)phenyl)-1-(4- substituted phenyl)prop-2-en-1-ones (4a-f). The cyclocondensation of 2-propen-1-ones has been first time carried separately with hydrazine hydrate and hydroxylamine hydrochloride in aqueous micellar tetradecyltrimethylammonium bromide (TTAB) medium for getting the titled heterocycles with good to excellent yields

Electroplex emission from bilayer LED based on 1-phenyl-3-(dimethyl-amino) styryl-5-(p-(dimethylamino) phenyl) pyrazoline and 2,2'-(2,5-thiophenediyl) bis-(5-phenyl)-1,3,4-oxadiazole

International Nuclear Information System (INIS)

Zhang Zhiming; Li Guowen; Shen Jiacong; Ma Yuguang

2003-01-01

The photoluminescence (PL) and electroluminescence (EL) properties of a novel organic compound, 2,2'-(2,5-thiophenediyl) bis-(5-phenyl)-1,3,4-oxadiazole (TOXD), were studied as electron transporting material. The PL emission maximum peak is at 408 nm of TOXD in chloroform and is at 472 nm in solid film, respectively. The EL emission maximum peaks of the bilayer ITO/PDP/TOXD/Al LED located between emission maximum peaks of TOXD (470 nm) and PDP (500 nm) at lower driving voltage, 4.5-5.4 V, and shifted to 508 nm at 6.0 V and 518 nm at 7.0 V with increase of applied voltage. The new EL emission peak at 518 nm from the bilayer LED is ascribed to electroplex formation at the interface of TOXD and PDP film in bilayer LED under external electric field. The electroplex emission is close to the energy levels of PDP and TOXD

Rearrangements of Cycloalkenyl Aryl Ethers

Directory of Open Access Journals (Sweden)

Mercedesz Törincsi

2016-04-01

Full Text Available Rearrangement reactions of cycloalkenyl phenol and naphthyl ethers and the acid-catalyzed cyclization of the resulting product were investigated. Claisen rearrangement afforded 2-substituted phenol and naphthol derivatives. Combined Claisen and Cope rearrangement resulted in the formation of 4-substituted phenol and naphthol derivatives. In the case of cycloocthylphenyl ether the consecutive Claisen and Cope rearrangements were followed by an alkyl migration. The mechanism of this novel rearrangement reaction is also discussed.

Ether: Bitcoin's competitor or ally?

OpenAIRE

Bouoiyour, Jamal; Selmi, Refk

2017-01-01

Although Bitcoin has long been dominant in the crypto scene, it is certainly not alone. Ether is another cryptocurrency related project that has attracted an intensive attention because of its additional features. This study seeks to test whether these cryptocurrencies differ in terms of their volatile and speculative behaviors, hedge, safe haven and risk diversification properties. Using different econometric techniques, we show that a) Bitcoin and Ether are volatile and relatively more resp...

A new cytotoxic sterol methoxymethyl ether from a deep water marine sponge Scleritoderma sp. cf. paccardi.

Science.gov (United States)

Gunasekera, S P; Kelly-Borges, M; Longley, R E

1996-02-01

24(R)-Methyl-5 alpha-cholest-7-enyl 3 beta-methoxymethyl ether (1), a new sterol ether, has been isolated from a deep-water marine sponge Scleritoderma sp. cf. paccardi. Compound 1 exhibited in vitro cytotoxicity against the cultured murine P-388 tumor cell line with an IC50 of 2.3 micrograms/mL. The isolation and structure elucidation of 1 by NMR spectroscopy is described.

Synthesis of Novel Ether Thionocarbamates and Study on Their Flotation Performance for Chalcopyrite

Directory of Open Access Journals (Sweden)

Gang Zhao

2016-09-01

Full Text Available Novel ether thionocarbamates, O-butoxy isopropyl-N-ethoxycarbonyl thionocarbamate (BIPECTC and O-(2-butoxy-1-methylethoxy isopropyl-N-ethoxycarbonyl thionocarbamate (BMIPECTC, were synthesized in this study. Their collecting efficiencies in the flotation of chalcopyrite were investigated using flotation tests, adsorption measurements, ultraviolet spectra (UV and Fourier transform-infrared spectroscopy (FT-IR and density functional theory (DFT calculations. The synthesized ether thionocarbamates showed better frothing properties than methyl-isobutyl-carbinol (MIBC and stronger affinity to chalcopyrite compared with O-isopropyl-N-ethyl thionocarbamate (IPETC and O-isobutyl-N-ethoxycarbonyl thionocarbamate (IBECTC. UV spectra analysis showed that the ether thionocarbamates react with Cu2+, with the exception of Fe2+, Ni2+, Zn2+ and Pb2+. Additionally, it was further confirmed by FTIR spectra that a chemical reaction occurs between copper ion and BIPECTC and BMIPECTC. The adsorption capacity measurements revealed that chalcopyrite exhibits good adsorption ability for ether thionocarbamates at an approximate pH of 8–10, which agrees with the flotation tests. The quantum chemistry calculation results indicated that the ether thionocarbamates exhibit stronger collecting ability for copper mineral in terms of frontier molecular orbital analysis, binding model simulation with copper ions and the molecular hydrophobicity compared with IPETC and IBECTC. The computational results are in very good agreement with the experimental results.

Interaction of polybrominated diphenyl ethers and aerobic granular sludge: biosorption and microbial degradation.

Science.gov (United States)

Ni, Shou-Qing; Cui, Qingjie; Zheng, Zhen

2014-01-01

As a new category of persistent organic pollutants, polybrominated diphenyl ethers (PBDEs) have become ubiquitous global environmental contaminants. No literature is available on the aerobic biotransformation of decabromodiphenyl ether (BDE-209). Herein, we investigated the interaction of PBDEs with aerobic granular sludge. The results show that the removal of BDE-209 from wastewater is mainly via biosorption onto aerobic granular sludge. The uptake capacity increased when temperature, contact time, and sludge dosage increased or solution pH dropped. Ionic strength had a negative influence on BDE-209 adsorption. The modified pseudo first-order kinetic model was appropriate to describe the adsorption kinetics. Microbial debromination of BDE-209 did not occur during the first 30 days of operation. Further study found that aerobic microbial degradation of 4,4(')-dibromodiphenyl ether happened with the production of lower BDE congeners.

Interaction of Polybrominated Diphenyl Ethers and Aerobic Granular Sludge: Biosorption and Microbial Degradation

Directory of Open Access Journals (Sweden)

Shou-Qing Ni

2014-01-01

Full Text Available As a new category of persistent organic pollutants, polybrominated diphenyl ethers (PBDEs have become ubiquitous global environmental contaminants. No literature is available on the aerobic biotransformation of decabromodiphenyl ether (BDE-209. Herein, we investigated the interaction of PBDEs with aerobic granular sludge. The results show that the removal of BDE-209 from wastewater is mainly via biosorption onto aerobic granular sludge. The uptake capacity increased when temperature, contact time, and sludge dosage increased or solution pH dropped. Ionic strength had a negative influence on BDE-209 adsorption. The modified pseudo first-order kinetic model was appropriate to describe the adsorption kinetics. Microbial debromination of BDE-209 did not occur during the first 30 days of operation. Further study found that aerobic microbial degradation of 4,4′-dibromodiphenyl ether happened with the production of lower BDE congeners.

Radiolabeled cholesteryl ethers: A need to analyze for biological stability before use

Directory of Open Access Journals (Sweden)

Denny Joseph Manual Kollareth

2018-03-01

Full Text Available Radiolabeled cholesteryl ethers are widely used as non-metabolizable tracers for lipoproteins and lipid emulsions in a variety of in vitro and in vivo experiments. Since cholesteryl ethers do not leave cells after uptake and are not hydrolyzed by mammalian cellular enzymes, these compounds can act as markers for cumulative cell uptakes of labeled particles. We have employed [3H]cholesteryl oleoyl ether to study the uptake and distribution of triglyceride-rich emulsion particles on animal models. However, questionable unexpected results compelled us to analyze the stability of these ethers. We tested the stability of two commercially available radiolabeled cholesteryl ethers - [3H]cholesteryl oleoyl ether and [3H]cholesteryl hexadecyl ether from different suppliers, employing in vitro, in vivo and chemical model systems. Our results show that, among the two cholesteryl ethers tested, one ether was hydrolyzed to free cholesterol in vitro, in vivo and chemically under alkaline hydrolyzing agent. Free cholesterol, unlike cholesteryl ether, can then re-enter the circulation leading to confounding results. The other ether was not hydrolyzed to free cholesterol and remained as a stable ether. Hence, radiolabeled cholesteryl ethers should be analyzed for biological stability before utilizing them for in vitro or in vivo experiments. Keywords: Cholesteryl ether, J774 A2 macrophages, Soy oil emulsion, Thin layer chromatography, triDHA emulsion

Radiolabeled cholesteryl ethers: A need to analyze for biological stability before use.

Science.gov (United States)

Manual Kollareth, Denny Joseph; Chang, Chuchun L; Hansen, Inge H; Deckelbaum, Richard J

2018-03-01

Radiolabeled cholesteryl ethers are widely used as non-metabolizable tracers for lipoproteins and lipid emulsions in a variety of in vitro and in vivo experiments. Since cholesteryl ethers do not leave cells after uptake and are not hydrolyzed by mammalian cellular enzymes, these compounds can act as markers for cumulative cell uptakes of labeled particles. We have employed [ 3 H]cholesteryl oleoyl ether to study the uptake and distribution of triglyceride-rich emulsion particles on animal models. However, questionable unexpected results compelled us to analyze the stability of these ethers. We tested the stability of two commercially available radiolabeled cholesteryl ethers - [ 3 H]cholesteryl oleoyl ether and [ 3 H]cholesteryl hexadecyl ether from different suppliers, employing in vitro , in vivo and chemical model systems. Our results show that, among the two cholesteryl ethers tested, one ether was hydrolyzed to free cholesterol in vitro , in vivo and chemically under alkaline hydrolyzing agent. Free cholesterol, unlike cholesteryl ether, can then re-enter the circulation leading to confounding results. The other ether was not hydrolyzed to free cholesterol and remained as a stable ether. Hence, radiolabeled cholesteryl ethers should be analyzed for biological stability before utilizing them for in vitro or in vivo experiments.

An Efficient Synthesis of 1-Alkyl-2-phenyl-4-quinolones from 2-Halobenzoic Acids

International Nuclear Information System (INIS)

Song, Yoon Ju; Choi, Jin Sun; Lee, Jae In

2013-01-01

The present method offers an efficient synthesis of 1-alkyl-2-phenyl-4-quinolones from 2-haloben-zoic acids. It has the advantages with respect to (i) synthesis of 2 equiv of alkynones 5 from 1 equiv of 4,6-pyrimidyl di(2-halobenzoates) 3, (ii) synthesis of versatile 1-alkyl-2-phenyl-4-quinolones in high overall yields, and (iii) use of readily available and cheap starting materials. Therefore, this method could be utilized as a practical synthesis of 1-alkyl-2-phenyl-4-quinolones. Several methods have been developed to synthesize 1-alkyl-2-phenyl-4-quinolones from 2'-substituted acetophenones, anilines, and 2-halobenzoyl chlorides as starting materials. The reaction of N-methylisatoic anhydride with the lithium enolate of an 4'-methoxyacetophenone afforded the 1-methyl-2-phenyl-4-quinolone in a short sequence, but the yield was low. N-(2-Acetylphenyl)benzamides, prepared by Friedel-Crafts acylation of N-phenyl benzamides with acetyl chloride or benzoylation of 2'-aminoacetophenones with benzoyl chlorides,8 were cyclized with potassium t-butoxide to yield 2-aryl-4-quinolones, which were further alkylated with alkyl iodides to give 1-alkyl-2-aryl-4-quinolones

An Efficient Synthesis of 1-Alkyl-2-phenyl-4-quinolones from 2-Halobenzoic Acids

Energy Technology Data Exchange (ETDEWEB)

Song, Yoon Ju; Choi, Jin Sun; Lee, Jae In [Duksung Women' s Univ., Seoul (Korea, Republic of)

2013-10-15

The present method offers an efficient synthesis of 1-alkyl-2-phenyl-4-quinolones from 2-haloben-zoic acids. It has the advantages with respect to (i) synthesis of 2 equiv of alkynones 5 from 1 equiv of 4,6-pyrimidyl di(2-halobenzoates) 3, (ii) synthesis of versatile 1-alkyl-2-phenyl-4-quinolones in high overall yields, and (iii) use of readily available and cheap starting materials. Therefore, this method could be utilized as a practical synthesis of 1-alkyl-2-phenyl-4-quinolones. Several methods have been developed to synthesize 1-alkyl-2-phenyl-4-quinolones from 2'-substituted acetophenones, anilines, and 2-halobenzoyl chlorides as starting materials. The reaction of N-methylisatoic anhydride with the lithium enolate of an 4'-methoxyacetophenone afforded the 1-methyl-2-phenyl-4-quinolone in a short sequence, but the yield was low. N-(2-Acetylphenyl)benzamides, prepared by Friedel-Crafts acylation of N-phenyl benzamides with acetyl chloride or benzoylation of 2'-aminoacetophenones with benzoyl chlorides,8 were cyclized with potassium t-butoxide to yield 2-aryl-4-quinolones, which were further alkylated with alkyl iodides to give 1-alkyl-2-aryl-4-quinolones.

Leaching characteristics of polybrominated diphenyl ethers (PBDEs) from flame-retardant plastics.

Science.gov (United States)

Kim, Yong-Jin; Osako, Masahiro; Sakai, Shin-ichi

2006-10-01

To investigate the effect of leachant on the leachability of polybrominated diphenyl ethers (PBDEs), we determined the leaching concentrations of PBDEs from flame-retardant plastic samples (TV housings and raw materials before molding processing) that are regarded as a source of PBDEs in landfill sites. The leachants used were distilled water, 20% methanol solution, and dissolved humic solution (DHS) of 1000 mg/l based on organic carbon. The leaching test conditions were a liquid-to-solid ratio of 100:1, and a contact period of five days, with twice-daily agitation in a temperature-controlled room of 30 degrees C without pH or ionic strength control. The leaching concentrations of PBDEs increased with increased content, and were found to be remarkably enhanced when methanol and DHS were used instead of distilled water. The enhancement of leachability in the presence of the latter was attributed to the cosolvency effect, and complex formations between the PBDEs and dissolved humic matter (DHM). PBDE concentrations in the leachate obtained from the leaching test and an actual landfill site revealed a significant presence of congeners below heptabromodiphenyl ethers (H7BDEs), detected in the leachate of the actual landfill, while significant amounts of nonabromodiphenyl ethers (N9BDEs) and decabromodiphenyl ether (D10BDE) were detected in the leachate of the leaching test.

Numerical investigation on the effect of injection pressure on the internal flow characteristics for diethyl ether, dimethyl ether and diesel fuel injectors using CFD

Directory of Open Access Journals (Sweden)

Vijayakumar Thulasi

2011-01-01

Full Text Available The spray characteristics of the diesel fuel are greatly affected by the cavitation formed inside the injector due to the high pressure differential across the nozzle. Many researchers across the globe are exploring the potential of using diethyl ether and dimethyl ether as an alternate for diesel fuel to meet the strict emission norms. Due to the variation in the fuel properties the internal flow characteristics in injectors for ether fuels are expected to be different from that of the diesel fuel. In this paper computational technique is used to study and compare the internal flow characteristics of diethyl ether, dimethyl ether and diesel fuel. The two phase flow model considering the fuel as a mixture of liquid and vapor is adopted for the simulation study. The injection pressure is varied from 100 to 400 bar and the flow characteristics of all three fuels are simulated and compared. Results indicate that all three fuels have distinct cavitating patterns owing to different property values. The dimethyl ether is found to be more cavitating than diesel and diethyl ether fuels as expected. The mass of fuel injected are found to be decreasing for the ether fuels when compared with diesel fuel at all injection pressures.

Novel sulfonated poly (ether ether keton)/polyetherimide acid-base blend membranes for vanadium redox flow battery applications

International Nuclear Information System (INIS)

Liu, Shuai; Wang, Lihua; Ding, Yue; Liu, Biqian; Han, Xutong; Song, Yanlin

2014-01-01

Highlights: • SPEEK/PEI acid-base blend membranes are prepared for VRB applications. • The acid-base blend membranes have much lower vanadium ion permeability. • The energy efficiency of SPEEK/PEI maintain around 86.9% after 50 cycles. - Abstract: Novel acid-base blend membranes composed of sulfonated poly (ether ether ketone) (SPEEK) and polyetherimide (PEI) were prepared for vanadium redox flow battery (VRB). The blend membranes were characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electronic microscopy (SEM). The ion exchange capacity (IEC), proton conductivity, water uptake, vanadium ion permeability and mechanical properties were measured. As a result, the acid-base blend membranes exhibit higher water uptake, IEC and lower vanadium ion permeability compared to Nafion117 membranes and all these properties decrease with the increase of PEI. In VRB single cell test, the VRB with blend membranes shows lower charge capacity loss, higher coulombic efficiency (CE) and energy efficiency (EE) than Nafion117 membrane. Furthermore, the acid-base blend membranes present stable performance up to 50 cycles with no significant decline in CE and EE. All experimental results indicate that the SPEEK/PEI (S/P) acid-base blend membranes show promising prospects for VRB

Ideal gas thermodynamic properties for the phenyl, phenoxy, and o-biphenyl radicals

Science.gov (United States)

Burcat, A.; Zeleznik, F. J.; Mcbride, B. J.

1985-01-01

Ideal gas thermodynamic properties of the phenyl and o-biphenyl radicals, their deuterated analogs and the phenoxy radical were calculated to 5000 K using estimated vibrational frequencies and structures. The ideal gas thermodynamic properties of benzene, biphenyl, their deuterated analogs and phenyl were also calculated.

Inter-population variations in concentrations, determinants of and correlations between 2,2',4,4',5,5'-hexachlorobiphenyl (CB-153) and 1,1-dichloro-2,2-bis (p-chlorophenyl)-ethylene (p,p'-DDE): a cross-sectional study of 3161 men and women from Inuit and European populations

Science.gov (United States)

Jönsson, Bo AG; Rylander, Lars; Lindh, Christian; Rignell-Hydbom, Anna; Giwercman, Aleksander; Toft, Gunnar; Pedersen, Henning S; Ludwicki, Jan K; Góralczyk, Katarzyna; Zvyezday, Valentyna; Spanò, Marcello; Bizzaro, Davide; Bonefeld-Jörgensen, Eva C; Manicardi, Gian Carlo; Bonde, Jens Peter; Hagmar, Lars

2005-01-01

Background The study is part of a collaborative project (Inuendo), aiming to assess the impact of dietary persistent organochlorine pollutants (POPs) on human fertility. The aims with the present study are to analyze inter-population variations in serum concentrations of 2,2',4,4',5,5'-hexachlorobiphenyl (CB-153) and 1,1-dichloro-2,2-bis (p-chlorophenyl)-ethylene (p,p'-DDE), to assess inter-population variations in biomarker correlations, and to evaluate the relative impact of different determinants for the inter-individual variations in POP-biomarkers. Method In study populations of 3161 adults, comprising Greenlandic Inuits, Swedish fishermen and their wives, and inhabitants from Warsaw, Poland and Kharkiv, Ukraine, serum concentrations of CB-153 and p,p'-DDE, were analysed by gas chromatography-mass spectrometry. Results The median serum concentrations of CB-153 were for male and female Inuits 200 and 110, for Swedish fishermen 190 and their wives 84, for Kharkiv men and women 44 and 27, and for Warsaw men and women 17 and 11 ng/g lipids, respectively. The median serum concentrations of p,p'-DDE were for Kharkiv men and women 930 and 650, for male and female Inuits 560 and 300, for Warsaw men and women 530 and 380, and for Swedish fishermen 240 and their wives 140 ng/g lipids, respectively. The correlation coefficients between CB-153 and p,p'-DDE varied between 0.19 and 0.92, with the highest correlation among Inuits and the lowest among men from Warsaw. Men had averagely higher serum concentrations of CB-153 and p,p'-DDE, and there were positive associations between age and the POP-biomarkers, whereas the associations with BMI and smoking were inconsistent. Dietary seafood was of importance only in the Inuit and Swedish populations. Conclusion CB-153 concentrations were much higher in Inuits and Swedish fishermen's populations than in the populations from Eastern Europe, whereas the pattern was different for p,p'-DDE showing highest concentrations in the

AIRBORNE POLYBROMINATED DIPHENYL ETHERS IN A COMPUTER CLASSROOM OF COLLEGE IN TAIWAN

Directory of Open Access Journals (Sweden)

F. H. Chang ، C. R. Yang ، C. Y. Tsai ، W. C. Lin

2009-04-01

Full Text Available This study characterized the airborne exposure of students to thirty polybrominated diphenyl ether congeners inside and outside a computer classroom in a southern Taiwan college. Arithmetic mean values of total indoor and outdoor polybrominated diphenyl ether concentrations were 125.0 pg/m3 (89.8 to 203.9 pg/m3 and 110.3 pg/m3 (83.5 to 157.0 pg/m3, respectively. Total indoor polybrominated diphenyl ether concentrations were one order of magnitude lower than those detected in homes in Birmingham, United Kingdom and in Ottawa, Canada but were several times higher than those measured in the ambient air in Ottawa, Canada and from the Bohai Sea to the Arctic. The five highest indoor concentrations of polybrominated diphenyl ether congeners were decabromodiphenyl ether (23.0 pg/m3, 4,4’-dibromodiphenyl ether (15.9 pg/m3, 2,2’,3,4,4’,5,5’,6-octabromodiphenyl ether (10.6 pg/m3, 2,4-dibromodiphenyl ether (10.3 pg/m3 and 2,2’,3,4,4’,5’,6-heptabromodiphenyl ether (10.0 pg/m3. Although indoor and outdoor total polybrominated diphenyl ether concentrations did not significantly differ, the indoor concentrations of 2,4-dibromodiphenyl ether, 2,2’,4-tribromodiphenyl ether, 2,4,4’-tribromodiphenyl ether, 2,2’,4,5’-tetrabromodiphenyl ether and 2,3’,4’,6-tetrabromodiphenyl ether were significantly higher than their outdoor concentrations. This study suggests the following measures: 1 to increase the air exchange rate and open classroom doors and windows for several minutes before classes to reduce indoor PBDE concentrations; 2 to reduce polybrominated diphenyl ether emissions from new devices, it’s better to use computer-related products that meet the Restriction of Hazardous Substances Directive adopted by the European Union.

Thermally reversible cross-linked poly(ether-urethanes

Directory of Open Access Journals (Sweden)

V. Gaina

2013-07-01

Full Text Available Cross-linked poly(ether-urethanes were prepared by Diels-Alder (DA reaction of the furan-containing poly(ether-urethane to bismaleimides and showed thermal reversibility evidenced by differential scanning calorimetry and attenuated total reflectance in conjunction with Fourier transform infrared spectroscopy (ATR-FTIR. The furan-containing poly(ether-urethanes were synthesized by the polyaddition reaction of 1,6-hexamethylene diisocyanate (HMDI or 4,4'- dibenzyl diisocyanate (DBDI to poly(tetramethylene ether glycol (PTMEG having Mn = 250, 650, 1000, 1500 and 2000 and 2-[N,N-bis(2-methyl-2-hydroxyethylamino]furfuryl as chain extender by the solution prepolymer method. The molar ratio of isocyanate: PTMEG:chain extender varied from 2:1:1 to 4:1:3, which produces a molar concentration of furyl group ranging between 3.65•10–4 and 1.25•10–3 mol/g.

Thermal Stability of Sulfonated Poly(Ether Ether Ketone) Films: on the Role of Protodesulfonation

OpenAIRE

Koziara, Beata; Kappert, Emiel; Ogieglo, Wojciech; Nijmeijer, Dorothea C.; Hempenius, Mark A.; Benes, Nieck Edwin

2016-01-01

Thin film and bulk, sulfonated poly(ether ether ketone) (SPEEK) have been subjected to a thermal treatment at 160–250 °C for up to 15 h. Exposing the films to 160 °C already causes partial desulfonation, and heating to temperatures exceeding 200 °C results in increased conjugation in the material, most likely via a slight cross-linking by H-substitution. It is well-known that the sulfonate proton plays a major role in the desulfonation reactions, and exchanging the protons with other cations ...

α-Diazo oxime ethers for N-heterocycle synthesis.

Science.gov (United States)

Choi, Subin; Ha, Sujin; Park, Cheol-Min

2017-06-01

This Feature Article introduces the preparation and synthetic utility of α-diazo oxime ethers. α-Oximino carbenes are useful synthons for N-heterocycles, and can be easily prepared from α-diazo oxime ethers as precursors. We begin with the preparation of α-diazo oxime ethers and their application in [3+2] cycloaddition. It turns out that the nature of metals bound to carbenes plays a crucial role in modulating the reactivity of α-oximino carbenes, in which copper carbenes smoothly react with enamines, whereas the less reactive enol ethers and nitriles require gold carbenes. In Section 3.2, a discussion on N-O and C-H bond activation is presented. Carbenes derived from diazo oxime ethers show unique reactivity towards N-O and C-H bond activation, in which the proximity of the two functionalities, carbene and oxime ether, dictates the preferred reaction pathways toward pyridines, pyrroles, and 2H-azirines. In Section 3.3, the development of tandem reactions based on α-diazo oxime ethers is discussed. The nature of carbenes in which whether free carbenes or metal complexes are involved dissects the pathway and forms different types of 2H-azirines. The 2H-azirine formation turned out to be an excellent platform for the tandem synthesis of N-heterocycles including pyrroles and pyridines. In the last section, we describe the electrophilic activation of 2H-azirines with vinyl carbenes and oximino carbenes. The resulting azirinium species undergo rapid ring expansion rearrangements to form pyridines and pyrazines.

Electroplex emission from bilayer LED based on 1-phenyl-3-(dimethyl-amino) styryl-5-(p-(dimethylamino) phenyl) pyrazoline and 2,2'-(2,5-thiophenediyl) bis-(5-phenyl)-1,3,4-oxadiazole

Energy Technology Data Exchange (ETDEWEB)

Zhang Zhiming; Li Guowen; Shen Jiacong; Ma Yuguang

2003-12-20

The photoluminescence (PL) and electroluminescence (EL) properties of a novel organic compound, 2,2'-(2,5-thiophenediyl) bis-(5-phenyl)-1,3,4-oxadiazole (TOXD), were studied as electron transporting material. The PL emission maximum peak is at 408 nm of TOXD in chloroform and is at 472 nm in solid film, respectively. The EL emission maximum peaks of the bilayer ITO/PDP/TOXD/Al LED located between emission maximum peaks of TOXD (470 nm) and PDP (500 nm) at lower driving voltage, 4.5-5.4 V, and shifted to 508 nm at 6.0 V and 518 nm at 7.0 V with increase of applied voltage. The new EL emission peak at 518 nm from the bilayer LED is ascribed to electroplex formation at the interface of TOXD and PDP film in bilayer LED under external electric field. The electroplex emission is close to the energy levels of PDP and TOXD.

Growth and characterization of new nonlinear optical 1-phenyl-3-(4-dimethylamino phenyl) prop-2-en-1-one (PDAC) single crystals

Science.gov (United States)

Ravindraswami, K.; Janardhana, K.; Gowda, Jayaprakash; Moolya, B. Narayana

2018-04-01

Non linear optical 1-phenyl-3-(4-dimethylamino phenyl) prop-2-en-1-one (PDAC) was synthesized using Claisen - Schmidt condensation method and studied for optical nonlinearity with an emphasis on structure-property relationship. The structural confirmation studies were carried out using 1H-NMR, FT-IR and single crystal XRD techniques. The nonlinear absorption and nonlinear refraction parameters in z-scan with nano second laser pulses were obtained by measuring the profile of propagated beam through the samples. The real and imaginary parts of third-order bulk susceptibility χ(3) were evaluated. Thermo gravimetric analysis is carried out to investigate the thermal stability.

Polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, naphthalenes and polybrominated diphenyl ethers in the edible fish caught from the Baltic Sea and lakes in Finland

International Nuclear Information System (INIS)

Isosaari, Pirjo; Hallikainen, Anja; Kiviranta, Hannu; Vuorinen, Pekka J.; Parmanne, Raimo; Koistinen, Jaana; Vartiainen, Terttu

2006-01-01

A total of 156 fish composite samples were collected from five areas of the Baltic Sea and from three lakes and analysed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polybrominated diphenyl ethers (PBDEs). The European Union's maximum permissible level for PCDD/Fs, 4 pg WHO-TEQ/g fresh weight (fw), was exceeded in salmon, river lamprey and Baltic herring. In other species from the Baltic Sea, the 90th percentile was 3.42 pg WHO PCDD/F -TEQ/g fw. In the lake fish, the concentrations of PCDD/Fs, PCBs and PCNs were only 29-46% of those in the same species caught from the Baltic Sea, whereas the concentrations of PBDEs in the lake fish were as high as in the Baltic Sea fish. Dioxin-like PCBs contributed to the total dioxin-like toxicity of PCBs and PCDD/Fs by 49 ± 12% in all the analysed samples. - Lake fish is less contaminated with dioxins, PCBs and chloronaphthalenes than Baltic Sea fish but similarly contaminated with polybrominated diphenyl ethers

Ethyl 2-amino-4-(3-chlorophenyl-5,10-dioxo-5,10-dihydro-4H-benzo[g]chromene-3-carboxylate

Directory of Open Access Journals (Sweden)

Xiao Hu

2009-06-01

Full Text Available The title molecule, C22H16ClNO5, was obtained by the reaction of (E-ethyl 3-(3-chlorophenyl-2-cyanoacrylate and 2-hydroxynaphthalene-1,4-dione catalysed by triethylamine in ethanol. In the crystal structure, the chlorobenzene ring makes a dihedral angle of 88.63 (4° with the fused ring system. The six-membered ring formed by an intramolecular N—H...O hydrogen bond is almost planar. The crystal packing is stabilized by N—H...O hydrogen bonds.

Dimethyl ether as a drift-chamber gas

International Nuclear Information System (INIS)

Bari, G.; Basile, M.; Bonvicini, G.; Cara Romeo, G.; Casaccia, R.; Cifarelli, L.; Cindolo, F.; Contin, A.; D'Ali, G.; Del Papa, C.; Focardi, S.; Iacobucci, G.; Maccarrone, G.; Massam, T.; Motta, F.; Nania, R.; Palmonari, F.; Prisco, G.; Sartorelli, G.; Susinno, G.; Votano, L.; Zichichi, A.; Istituto Nazionale di Fisica Nucleare, Bologna; European Organization for Nuclear Research, Geneva; Istituto Nazionale di Fisica Nucleare, Frascati; Michigan Univ., Ann Arbor; Palermo Univ.

1986-01-01

We have continued the testing of dimethyl ether as a drift-chamber gas in order to improve the understanding of its properties. In particular, we report on measurement accuracy, on systematic effects, and some preliminary data on the ageing of a detector filled with dimethyl ether. (orig.)

Bioprocess design guided by in situ substrate supply and product removal: process intensification for synthesis of (S)-1-(2-chlorophenyl)ethanol.

Science.gov (United States)

Schmölzer, Katharina; Mädje, Katharina; Nidetzky, Bernd; Kratzer, Regina

2012-03-01

We report herein on bioprocess development guided by the hydrophobicities of substrate and product. Bioreductions of o-chloroacetophenone are severely limited by instability of the catalyst in the presence of aromatic substrate and (S)-1-(2-chlorophenyl)ethanol. In situ substrate supply and product removal was used to protect the utilized Escherichia coli whole cell catalyst based on Candida tenuis xylose reductase during the reaction. Further engineering at the levels of the catalyst and the reaction media was matched to low substrate concentrations in the aqueous phase. Productivities obtained in aqueous batch reductions were 21-fold improved by addition of 20% (v/v) hexane, NAD(+), expression engineering, cell permeabilization and pH optimization. Reduction of 300 mM substrate was accomplished in 97% yield and use of the co-solvent hexane in subsequent extraction steps led to 88% recovery. Product loss due to high catalyst loading was minimized by using the same extractant in bioreduction and product isolation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Process for making propenyl ethers and photopolymerizable compositions containing them

Science.gov (United States)

Crivello, James V.

1996-01-01

Propenyl ether monomers of formula V A(OCH.dbd.CHCH.sub.3).sub.n wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

RATE CONSTANTS FOR THE REACTIONS OF OH RADICALS AND CL ATOMS WITH DI-N-PROPYL ETHER AND DI-N-BUTYL ETHER AND THEIR DEUTERATED ANALOGS. (R825252)

Science.gov (United States)

Using relative rate methods, rate constants for the gas-phase reactions of OH radicals and Cl atoms with di-n-propyl ether, di-n-propyl ether-d14, di-n-butyl ether and di-n-butyl ether-d18 have been measured at 296 ? 2 K and atmos...

APPLICATION OF PHOTOCATALYTIC PROCESS FOR REMOVAL OF METHYL TERT-BUTYL ETHER FROM HIGHLYCONTAMINATED WATER

Directory of Open Access Journals (Sweden)

A. Mesdaghinia

2007-09-01

Full Text Available The oxygenate methyl tert-butyl ether is added to gasoline to increase the octane level and to reduce carbon monoxide and hydrocarbon emissions by vehicles. The high mobility, water solubility, and resistance to natural attenuation associated with methyl tert-butyl ether may result in contamination of ground and surface waters. In this research the degradation of aqueous methyl tert-butyl ether at relatively high concentrations was investigated by UV-vis/TiO2/H2O2 photocatalytic process. The effect of important operational parameters such as pH, amount of H2O2, catalyst loading, and irradiation time were also studied. Concentrations of methyl tert-butyl ether and intermediates such as tert-butyl formate and tert-butyl alcohol were measured over a 180 min period using a gas chromatograph equipped with flame ionization detector and combined with headspace sampler. Results showed that the time required for complete degradation increased from 30 to 180min, when the initial concentration was increased from 10 to 500mg/L. The first order rate constant for degradation of methyl tert-butyl ether from the hydroxyl radical was estimated to be 0.177 to 0.022 1/min as the concentration increased from 10 to 500mg/L. Study on the overall mineralization monitored by total organic carbon (TOC analysis showed that in the initial concentration of 100mg/L methyl tert-butyl ether, complete mineralization was obtained after 110min under UV-vis/TiO2/H2O2 photocatalytic process.

Selective crystallization of cations with crown ethers

International Nuclear Information System (INIS)

Heffels, Dennis Egidius

2014-01-01

The aim of this work was to study the selectivity and preferences of the incorporation of differently sized cations in the cavities of various crown ethers and the characterization of the resulting compounds. The coordination preferences of crown ethers with different cavities have long been known, and the impact of other effects on the structure formation have increasingly become the focus of attention. In this work a comparative overview of the coordination preferences depending on various factors was undertaken. The focus was mainly on the variation of the cavity of the crown ether in the presence of differently sized cations. In addition, the effects of the solvent and differently coordinating anions have been investigated. Within the framework of this work, basic coordination preferences could be detected with rare earth nitrates, which are affected particularly by the choice of the solvent. The formation of different types of structures could be controlled by varying the conditions such that the incorporation of the cation in the cavity of the crown ether was influenced and the formation of a particular type of structure can be influenced partly by the choice of solvent. In this case no direct preferences for the incorporation into the cavity of the crown ether in relation to the cation size were observed for rare earth cations. However, the coordination of the crown ether leads in each case - for lanthanides - to rather high coordination numbers. A total of five new rare earth complexes and two structural variants could be observed with crown ethers. In the study of the selectivity of the incorporation into the cavity, known structures were also reproduced and further structures were characterized but the crystal structures not entirely solved. With the use of monovalent cations such as potassium, lithium or silver a total of nine new compounds could be synthesized, while no clear preferences for the incorporation of certain cations were detected. The

Synthesis, Characterization and Antimicrobial Activity of Metal Chelates of 5-[4-Chloro phenyl(1, 3, 4thiadiazol-2-ylamino methylene]-8-hydroxy quinoline

Directory of Open Access Journals (Sweden)

Divyesh K. Patel

2009-01-01

Full Text Available 5-Chloromethyl-8-quinolinol was condensed stoichiometrically with 5-(4-chlorophenyl-(1,3,4 thiadiazol-2-ylamine in the presence of sodium bicarbonate. The resulting 5-[4-chlorophenyl-(1,3,4thiadiazol-2-ylamino methylene]-8-quinolinol (CTAQ was characterized by elemental analysis and spectral studies. The transition metal chelates viz. Cu2+, Ni2+, Co2+, Mn2+ and Zn2+ of CTAQ were prepared and characterized by metal-ligand (M:L ratio, IR and reflectance spectroscopies and magnetic properties. The antifungal activity of CTAQ and its metal chelates was screened against various fungi. The results show that all these samples are good antifungal agents.

Human dosimetry of carbon-11 labeled N-butan-2-yl-1-(2-chlorophenyl)-N-methylisoquinoline-3-carboxamide extrapolated from whole-body distribution kinetics and radiometabolism in rats

DEFF Research Database (Denmark)

Luoto, Pauliina; Laitinen, Iina; Suilamo, Sami

2010-01-01

Carbon-11 labeled N-butan-2-yl-1-(2-chlorophenyl)-N-methylisoquinoline-3-carboxamide ([11C]PK11195) is a peripheral benzodiazepine receptor (PBR) antagonist that is used as a positron emission tomography (PET) radiopharmaceutical for neuroinflammatory imaging. This study was designed to investigate...

Radiation-induced transformations of cellulose ethers

International Nuclear Information System (INIS)

Nud'ga, L.A.; Petropavlovskii, G.S.; Plisko, E.A.; Isakova, O.V.; Ershov, B.G.

1988-01-01

The purpose of this investigation was to study the transformation which take place under the action of γ-radiation in a number of cellulose ethers containing both saturated (carboxymethyl, hydroxyethyl) and unsaturated (allyl, methacryloyl) groups. Irradiation was carried out on a 60 Co unit in air at 77 and 300 K; the dose rate was 37 and 50 kGy/h respectively. The EPR spectra of γ-irradiated hydroxyethyl- and allylhydroxyethylcelluloses are identical. Under the action of γ-radiation extensive changes took place in cellulose ethers which are exhibited in degradation or the formation of three-dimensional structures and are accompanied by a change in the functional composition. The efficiency in the formation of radicals and their localization are determined by the nature and number of substituents in the cellulose ethers

U.S. Geological Survey laboratory method for methyl tert-Butyl ether and other fuel oxygenates

Science.gov (United States)

Raese, Jon W.; Rose, Donna L.; Sandstrom, Mark W.

1995-01-01

Methyl tert-butyl ether (MTBE) was found in shallow ground-water samples in a study of 8 urban and 20 agricultural areas throughout the United States in 1993 and 1994 (Squillace and others, 1995, p. 1). The compound is added to gasoline either seasonally or year round in many parts of the United States to increase the octane level and to reduce carbon monoxide and ozone levels in the air. The U.S. Geological Survey (USGS) National Water Quality Laboratory (NWQL), near Denver, uses state-of-the-art technology to analyze samples for MTBE as part of the USGS water-quality studies. In addition, the NWQL offers custom analyses to determine two other fuel oxygenates--ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME). The NWQL was not able to obtain a reference standard for tert-amyl ethyl ether (TAEE), another possible fuel oxygenate (Shelley and Fouhy, 1994, p. 63). The shallow ground-water samples were collected as part of the USGS National Water-Quality Assessment Program. These samples were collected from 211 urban wells or springs and 562 agricultural wells sampled by the USGS in 1993 and 1994. The wells were keyed to specific land-use areas to assess the effects of different uses on ground-water quality (Squillace and others, 1995, p. 2). Ground-water samples were preserved on site to pH less than or equal to 2 with a solution of 1:1 hydrochloric acid. All samples were analyzed at the NWQL within 2 weeks after collection. The purpose of this fact sheet is to explain briefly the analytical method implemented by the USGS for determining MTBE and other fuel oxygenates. The scope is necessarily limited to an overview of the analytical method (instrumentation, sample preparation, calibration and quantitation, identification, and preservation of samples) and method performance (reagent blanks, accuracy, and precision).

Determination of n-octanol/water partition coefficient for DDT-related compounds by RP-HPLC with a novel dual-point retention time correction.

Science.gov (United States)

Han, Shu-ying; Qiao, Jun-qin; Zhang, Yun-yang; Yang, Li-li; Lian, Hong-zhen; Ge, Xin; Chen, Hong-yuan

2011-03-01

n-Octanol/water partition coefficients (P) for DDTs and dicofol were determined by reversed-phase high performance liquid chromatography (RP-HPLC) on a C(18) column using methanol-water mixture as mobile phase. A dual-point retention time correction (DP-RTC) was proposed to rectify chromatographic retention time (t(R)) shift resulted from stationary phase aging. Based on this correction, the relationship between logP and logk(w), the logarithm of the retention factor extrapolated to pure water, was investigated for a set of 12 benzene homologues and DDT-related compounds with reliable experimental P as model compounds. A linear regression logP=(1.10±0.04) logk(w) - (0.60±0.17) was established with correlation coefficient R(2) of 0.988, cross-validated correlation coefficient R(cv)(2) of 0.983 and standard deviation (SD) of 0.156. This model was further validated using four verification compounds, naphthalene, biphenyl, 2,2-bis(4-chlorophenyl)-1,1-dichloroethane (p,p'-DDD) and 2,2-bis(4-chlorophenyl)-1,1-dichloroethene (p,p'-DDE) with similar structure to DDT. The RP-HPLC-determined P values showed good consistency with shake-flask (SFM) or slow-stirring (SSM) results, especially for highly hydrophobic compounds with logP in the range of 4-7. Then, the P values for five DDT-related compounds, 2-(2-chlorophenyl)-2-(4-chlorophenyl)-1,1,1-trichloroethane (o,p'-DDT), 2-(2-chlorophenyl)-2-(4-chlorophenyl)-1,1-dichloroethane (o,p'-DDD), 2-(2-chlorophenyl)-2-(4-chlorophenyl)-1,1-dichloroethene (o,p'-DDE), and 2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol (dicofol) and its main degradation product 4,4'-dichlorobenzophenone (p,p'-DBP) were evaluated by the improved RP-HPLC method for the first time. The excellent precision with SD less than 0.03 proved that the novel DP-RTC protocol can significantly increases the determination accuracy and reliability of P by RP-HPLC. Copyright © 2011 Elsevier Ltd. All rights reserved.

Characterization of melt-blended graphene – poly(ether ether ketone) nanocomposite

International Nuclear Information System (INIS)

Tewatia, Arya; Hendrix, Justin; Dong, Zhizhong; Taghon, Meredith; Tse, Stephen; Chiu, Gordon; Mayo, William E.; Kear, Bernard; Nosker, Thomas; Lynch, Jennifer

2017-01-01

Using a high shear melt-processing method, graphene-reinforced polymer matrix composites (G-PMCs) were produced with good distribution and particle–matrix interaction of bi/trilayer graphene at 2 wt. % and 5 wt. % in poly ether ether ketone (2Gn-PEEK and 5Gn-PEEK). The morphology, structure, thermal properties, and mechanical properties of PEEK, 2Gn-PEEK and 5 Gn-PEEK were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), flexural mechanical testing, and dynamic mechanical analysis (DMA). Addition of graphene to PEEK induces surface crystallization, increased percent crystallinity, offers a composite that is thermally stable until 550 °C and enhances thermomechanical properties. Results show that graphene was successfully melt-blended within PEEK using this method.

Characterization of melt-blended graphene – poly(ether ether ketone) nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Tewatia, Arya; Hendrix, Justin [Department of Materials Science and Engineering, Rutgers University, 607 Taylor Road, Piscataway, NJ, 08854 (United States); Dong, Zhizhong [Department of Mechanical Engineering, Rutgers University, 98 Brett Road, Piscataway, NJ 08854 (United States); Taghon, Meredith [Department of Materials Science and Engineering, Rutgers University, 607 Taylor Road, Piscataway, NJ, 08854 (United States); Tse, Stephen [Department of Mechanical Engineering, Rutgers University, 98 Brett Road, Piscataway, NJ 08854 (United States); Chiu, Gordon; Mayo, William E.; Kear, Bernard; Nosker, Thomas [Department of Materials Science and Engineering, Rutgers University, 607 Taylor Road, Piscataway, NJ, 08854 (United States); Lynch, Jennifer, E-mail: jklynch@rci.rutgers.edu [Department of Materials Science and Engineering, Rutgers University, 607 Taylor Road, Piscataway, NJ, 08854 (United States)

2017-02-15

Using a high shear melt-processing method, graphene-reinforced polymer matrix composites (G-PMCs) were produced with good distribution and particle–matrix interaction of bi/trilayer graphene at 2 wt. % and 5 wt. % in poly ether ether ketone (2Gn-PEEK and 5Gn-PEEK). The morphology, structure, thermal properties, and mechanical properties of PEEK, 2Gn-PEEK and 5 Gn-PEEK were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), flexural mechanical testing, and dynamic mechanical analysis (DMA). Addition of graphene to PEEK induces surface crystallization, increased percent crystallinity, offers a composite that is thermally stable until 550 °C and enhances thermomechanical properties. Results show that graphene was successfully melt-blended within PEEK using this method.

Quantitative nuclear magnetic resonance spectrometry II. Purity of phosphorus-based agrochemicals glyphosate (N-(phosphonomethyl)-glycine) and profenofos (O-(4-bromo-2-chlorophenyl) O-ethyl S-propyl phosphorothioate) measured by 1H and 31P QNMR spectrometry

International Nuclear Information System (INIS)

Saed Al Deen, Tareq; Brynn Hibbert, D.; Hook, James M.; Wells, Robert J.

2002-01-01

The purities of the widely-used herbicide glyphosate (N-(phosphonomethyl)glycine), and the insecticide profenofos (O-(4-bromo-2-chlorophenyl) O-ethyl S-propyl phosphorothioate) were determined by 1 H and 31 P quantitative nuclear magnetic resonance (QNMR) spectrometry using an internal standard. QNMR does not need a standard reference of the same target analyte, in contrast to chromatographic methods, but only a compound containing the nucleus of interest. Sodium acetate and sodium phosphate of known purity were chosen as internal standards for 1 H NMR and 31 P NMR), respectively for the water soluble glyphosate and a single internal standard, trimethyl phosphate for both 1 H and 31 P NMR quantitative analysis of the organic soluble profenofos. These standards have NMR peaks that do not interfere with those of the analyte, they are chemically inert and are soluble in the deuterated solvent. The average purity of glyphosate obtained by 1 H NMR (97.07%, σ=0.68) agreed with that by 31 P NMR (96.53%, σ=0.90; ANOVA, P=0.074) for the five batches provided by the manufacturer according to the procedures for chemical registration in Australia. The standard deviations of seven independent analyses of a single batch by 1 H NMR and 31 P NMR were σ=0.24% and σ=0.33%, respectively, values which confirm the exceptional precision of the method. The purity of profenofos by 1 H NMR (94.63%, σ=0.14) also agreed with that by 31 P NMR (94.62%, σ=0.59; ANOVA, P=0.97). Uncertainty budgets for the measured purities of glyphosate and profenofos show that the uncertainty in the purity of the internal standard is a major contributor to the uncertainty of the result. NMR was also used to establish the impurity profile of both compounds, and quantify the impurities present

On the ether-like Lorentz-breaking actions

International Nuclear Information System (INIS)

Petrov, A.Yu; Nascimento, J.R.; Gomes, M.; Silva, A. J. da

2011-01-01

We demonstrate the generation of the CPT-even, ether-like Lorentz-breaking actions for the scalar and electro-magnetic fields via their appropriate Lorentz-breaking coupling to spinor fields in three, four and five space-time dimensions. Besides, we show that the ether-like terms for the spinor field also can be generated as a consequence of the same couplings. The key result which will be presented here is the finiteness of the ether-like term for the electromagnetic field not only in three and five space-time dimensions where it is natural due to known effects of the dimensional regularization but also in four space-time dimensions. Moreover, we present the calculation of the last result within different calculational schemes and conclude that the result for the four-dimensional ether-like term for the electromagnetic field essentially depending on the calculation scheme, similarly to the result for the Carroll-Field-Jackiw (CFJ) term which probably signalizes a possibility for arising of a new anomaly. Also we discuss the dispersion relations in the theories with ether-like Lorentz-breaking terms which allows to discuss the consistency of the Lorentz-breaking modified theories for different (space-like or time-like) Lorentz-breaking vectors and find the tree-level effective (Breit) potential for fermion scattering and the one-loop effective potential corresponding to the action of the scalar field. (author)

Characterization of Microsolvated Crown Ethers from Broadband Rotational Spectroscopy

Science.gov (United States)

Perez, Cristobal; Schnell, Melanie; Blanco, Susana; Lopez, Juan Carlos

2016-06-01

Since they were first synthetized, crown ethers have been extensively used in organometallic chemistry due to their unparalleled binding selectivity with alkali metal cations. From a structural point of view, crown ethers are heterocycles containing oxygen and/or other heteroatoms, although the most common ones are formed from ethylene oxide unit. Crown ethers are conventionally seen as being hydrophilic inside and hydrophobic outside when the structures found for the metal cation complexes are considered. However, crown ethers are extremely flexible and in isolation may present a variety of stable conformations so that their structure may be easily adapted in presence of a strong ligand as an alkali metal cation minimize the energy of the resulting complex. Water can be considered a soft ligand which interacts with crown ethers through moderate hydrogen bonds. It is thus interesting to investigate which conformers are selected by water to form complexes, the preferred interaction sites and the possible conformational changes due to the presence of one or more water molecules. Previous studies identified microsolvated crown ethers but in all cases with a chromophore group attached to the structure. Here we present a broadband rotational spectroscopy study of microsolvated crown ethers produced in a pulsed molecular jet expansion. Several 1:1 and 1:2 crown ether:water aggregates are presented for 12-crown-4, 15-crown-5 and 18-crown-6. Unambiguous identification of the structures has been achieved using isotopic substitution within the water unit. The subtle changes induced in the structures of the crown ether monomer upon complexation and the hydrogen-bonding network that hold them together will be also discussed. F. Gámez, B. Martínez-Haya, S. Blanco,J. C. López and J. L. Alonso, Phys. Chem. Chem. Phys. 2014, 14 12912-12918 V. A. Shubert, C.W. Müller and T. Zwier, J. Phys. Chem. A 2009, 113 8067-8079

Decomposition of lignin model compounds by Lewis acid catalysts in water and ethanol

NARCIS (Netherlands)

Guvenatam, Burcu; Heeres, Erik H.J.; Pidko, Evgeny A.; Hensen, Emiel J. M.

2015-01-01

The conversion of benzyl phenyl ether, diphenyl ether, diphenyl methane and biphenyl as representative model compounds for alpha-O-4, 5-O-4, alpha(1) (methylene bridges) and 5-5' lignin linkages was investigated. We compared the use of metal chlorides and acetates. The reactions were studied in sub-

3,5-Bis(4-methoxyphenyl-1-phenyl-4,5-dihydro-1H-pyrazole

Directory of Open Access Journals (Sweden)

Zeliha Baktır

2011-02-01

Full Text Available In the title compound, C23H22N2O2, the central pyrazole ring is nearly planar (r.m.s. deviation = 0.046 Å and it makes a dihedral angle of 18.5 (2° with the phenyl ring. The dihedral angles between the phenyl and the two methoxy-substituted phenyl rings are 26.2 (2 and 80.6 (2°. The crystal structure is stabilized by C—H...π stacking interactions and weak π–π interactions [centriod–centroid distance = 3.891 (2 Å].

Thermogravimetric analysis of the polymer acrylate-vinyl ether mixture cured by radiation

International Nuclear Information System (INIS)

Danu, Sugiarto

1998-01-01

An experiment on thermal stability of the polymer acrylate-vinyl ether mixture cured by radiation have been done using thermogravimetric analysis. Three kinds of acrylic oligomers i.e., epoxy acrylate, urethane acrylate, and polypropylene glycol diacrylate, and vinyl ether monomers i.e., triethylene glycol divinyl ether (DVE-3), 1,4-cyclohexane dimethanol divinyl ether (CHVE), and butanediol monovinyl ether (HBVE) were used in the experiment. Reaction was taken via radical and cationic polymerisation. In case of cationic polymerisation, diphenyliodonium hexafluorophosphate fotoinisiator was used in the formulation. Thermogravimetric analysis was conducted in a nitrogen atmosphere at a flow rate of 40 ml/minute with a constant heating rate 10 o C and evaluation range were done from 25 to 500 o C. The results of thermogravimetric analysis showed that acrylate and DVE-3 mixture produced the polymer films with higher thermal stability than the mixture of acrylate with CHVE or HBVE. The composition of acrylate-vinyl ether mixture and degree of unsaturation of vinyl ether monomers influenced the thermal stability of polymer. The mixture of epoxy acrylate-vinyl ether and polypropylene glycol diacrylate-vinyl ether have 1 initial decomposition temperature whereas the urethane acrylate-vinyl ether mixture has 2 initial decomposition temperatures. (authors)

Secondary deuterium isotope effects and transition state structure in the aromatic claisen rearrangement

International Nuclear Information System (INIS)

McMichael, K.D.; Korver, G.L.

1979-01-01

Kinetic experiments were carried out simultaneously on separate methyl salicylate solutions of allyl phenyl ether and its deuterated phenyl analogues at 170 to 195 0 C. Gas chromatographic analysis for allyl phenyl ether using an internal standard (anisole) and mechanical integration produced concentration/time data which were fitted to the exponential form of the first-order rate equation by a standard and nonlinear least-square program. At least 15 points were obtained for each run, covering 10 to 85% reaction. The derived isotope effects show no temperature dependence. Averages for 6 runs with each compound are k/sub H//k/sub α-D 2 / = 1.18 and K/sub H//k/sub γ-D 2 / = 0.95. An equilibrium α effect of 1.30 and a γ effect of 0.87 may be calculated for both deuterium atoms at 185 0 C. These results show that the C--H vibration frequencies are approximately (1.18 - 1)/(1.27 - 1) or 57 to 77% of the way from those of allyl phenyl ether to those of the cyclohexadiene intermediate. The C--H frequencies of the γ carbon in the transition state are about (0.95 - 1)/(0.88 - 1) or 22 to 62% of the way to those of the intermediate. The structure of the transition state, as far as these bonding frequencies are concerned, is consistent with the Claisen rearrangement

Polymerization of N-(fluoro phenyl) maleimides

International Nuclear Information System (INIS)

Barrales-Rienda, J.M.; Ramos, J.G.; Chaves, M.S.

1979-01-01

Poly(N-aryl maleimide)s of characteristic structures have been synthesized and some of their physical properties studied. The polymerization of N-(fluoro phenyl) maleimides by free-radical initiation in bulk or in solution and by anionic catalyst have been studied to compare the characteristics of polymerization by γ-ray irradiation with that by free-radical initiation. The polymers were characterized by elemental analysis, intrinsic viscosity, spectroscopy (IR and NMR), programmed thermogravimetric analysis, and x-ray diffraction. Spectra of polymers prepared by radiation and anionic polymerization were nearly identical with those of polymers prepared by free-radical polymerization initiated by azobisisobutyronitrile in bulk or in solution and by the self-initiated thermal polymerization. A variety of reaction conditions were tried, but all attempts to change the molecular structure of the polymers were unsuccessful. Rates of thermal degradation for poly[N-(fluoro phenyl) maleimide]s have been analyzed by using a multiple-heating-rate procedure. Overall activation energy, order of reaction, and frequency factor have been evaluated. 6 figures, 8 tables

Synthesis and Anticancer Activity of Novel Thiazole-5-Carboxamide Derivatives

Directory of Open Access Journals (Sweden)

Wen-Xi Cai

2016-01-01

Full Text Available A series of novel 2-phenyl-4-trifluoromethyl thiazole-5-carboxamide derivatives have been synthesized and evaluated for their anticancer activity against A-549, Bel7402, and HCT-8 cell lines. Among the tested compounds, highest activity (48% was achieved with the 4-chloro-2-methylphenyl amido substituted thiazole containing the 2-chlorophenyl group on the two position of the heterocyclic ring. Other structurally similar compounds displayed moderate activity. The key intermediates have been fully characterized.

Development of an extractive-scintillating chromatographic resin for the detection of radioactive isotopes

International Nuclear Information System (INIS)

Vincze, A.; Halasz, L.; Solymosi, J.; Molnar, A.; Safrany, A.

2007-01-01

In this paper, the development of a new-type of resin is presented, which contains selective complexing and scintillating molecules in a chemically bonded form. The resin material is produced via radiation polymerization of a solution of 2-(4-allyloxy-phenyl)-5-phenyl oxazole, 5-(allyloxyphenyl)- 2-[4-(5-phenyl-oxazole-2-il)-phenyl] oxazole, diethylene glycol dimethacrylate (DEGMA), styrene and the allyl derivative of a 18C6 crown ether-dicarbolic acid complexing agent. The product is a macroporous polymer matrix that shows fluorescent properties and ion binding capacity excellent for radioanalytical purposes. (author)

Synthesis, molecular structure, FT-IR and XRD investigations of 2-(4-chlorophenyl)-2-oxoethyl 2-chlorobenzoate: a comparative DFT study.

Science.gov (United States)

Chidan Kumar, C S; Fun, Hoong Kun; Tursun, Mahir; Ooi, Chin Wei; Chandraju, Siddegowda; Quah, Ching Kheng; Parlak, Cemal

2014-04-24

2-(4-Chlorophenyl)-2-oxoethyl 2-chlorobenzoate has been synthesized, its structural and vibrational properties have been reported using FT-IR and single-crystal X-ray diffraction (XRD) studies. The conformational analysis, optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of the synthesized compound (C15H10Cl2O3) have been examined by means of Becke-3-Lee-Yang-Parr (B3LYP) density functional theory (DFT) method together with 6-31++G(d,p) basis set. Furthermore, reliable conformational investigation and vibrational assignments have been made by the potential energy surface (PES) and potential energy distribution (PED) analyses, respectively. Calculations are performed with two possible conformations. The title compound crystallizes in orthorhombic space group Pbca with the unit cell dimensions a=12.312(5) Å, b=8.103(3) Å, c=27.565(11) Å, V=2750.0(19) Å(3). B3LYP method provides satisfactory evidence for the prediction of vibrational wavenumbers and structural parameters. Copyright © 2014 Elsevier B.V. All rights reserved.

Highly stable ionic-covalent cross-linked sulfonated poly(ether ether ketone) for direct methanol fuel cells

Science.gov (United States)

Lei, Linfeng; Zhu, Xingye; Xu, Jianfeng; Qian, Huidong; Zou, Zhiqing; Yang, Hui

2017-05-01

A novel ionic cross-linked sulfonated poly(ether ether ketone) containing equal content of sulfonic acid and pendant tertiary amine groups (TA-SPEEK) has been initially synthesized for the application in direct methanol fuel cells (DMFCs). By adjusting the ratio of p-xylene dibromide to tertiary amine groups of TA-SPEEK, a series of ionic-covalent cross-linked membranes (C-SPEEK-x) with tunable degree of cross-linking are prepared. Compared with the pristine membrane, the ionic and ionic-covalent cross-linked proton exchange membranes (PEMs) exhibit reduced methanol permeability and improved mechanical properties, dimensional and oxidative stability. The proton conductivity and methanol selectivity of protonated TA-SPEEK and C-SPEEK-x at 25 °C is up to 0.109 S cm-1 and 3.88 × 105 S s cm-3, respectively, which are higher than that of Nafion 115. The DMFC incorporating C-SPEEK-25 exhibits a maximum power density as high as 35.3 mW cm-2 with 4 M MeOH at 25 °C (31.8 mW cm-2 for Nafion 115). Due to the highly oxidative stability of the membrane, no obvious performance degradation of the DMFC is observed after more than 400 h operation, indicating such cost-effective ionic-covalent cross-linked membranes have substantial potential as alternative PEMs for DMFC applications.

Exogenous ether lipids predominantly target mitochondria

DEFF Research Database (Denmark)

Kuerschner, Lars; Richter, Doris; Hannibal-Bach, Hans Kristian

2012-01-01

Ether lipids are ubiquitous constituents of cellular membranes with no discrete cell biological function assigned yet. Using fluorescent polyene-ether lipids we analyzed their intracellular distribution in living cells by microscopy. Mitochondria and the endoplasmic reticulum accumulated high......, accumulated to mitochondria and induced morphological changes and cellular apoptosis. These data indicate that edelfosine could exert its pro-apoptotic power by targeting and damaging mitochondria and thereby inducing cellular apoptosis. In general, this study implies an important role of mitochondria...

Mass transport of direct methanol fuel cell species in sulfonated poly(ether ether ketone) membranes

International Nuclear Information System (INIS)

Silva, V.S.; Ruffmann, B.; Vetter, S.; Boaventura, M.; Mendes, A.M.; Madeira, L.M.; Nunes, S.P.

2006-01-01

Homogeneous membranes based on sulfonated poly(ether ether ketone) (sPEEK) with different sulfonation degrees (SD) were prepared and characterized. In order to perform a critical analysis of the SD effect on the polymer barrier and mass transport properties towards direct methanol fuel cell species, proton conductivity, water/methanol pervaporation and nitrogen/oxygen/carbon dioxide pressure rise method experiments are proposed. This procedure allows the evaluation of the individual permeability coefficients in hydrated sPEEK membranes with different sulfonation degrees. Nafion[reg] 112 was used as reference material. DMFC tests were also performed at 50 deg. C. It was observed that the proton conductivity and the permeability towards water, methanol, oxygen and carbon dioxide increase with the sPEEK sulfonation degree. In contrast, the SD seems to not affect the nitrogen permeability coefficient. In terms of selectivity, it was observed that the carbon dioxide/oxygen selectivity increases with the sPEEK SD. In contrast, the nitrogen/oxygen selectivity decreases. In terms of barrier properties for preventing the DMFC reactants loss, the polymer electrolyte membrane based on the sulfonated poly(ether ether ketone) with SD lower or equal to 71%, although having slightly lower proton conductivity, presented much better characteristics for fuel cell applications compared with the well known Nafion[reg] 112. In terms of the DMFC tests of the studied membranes at low temperature, the sPEEK membrane with SD = 71% showed to have similar performance, or even better, as that of Nafion[reg] 112. However, the highest DMFC overall efficiency was achieved using sPEEK membrane with SD = 52%

Sulfonated poly(tetramethydiphenyl ether ether ketone) membranes for vanadium redox flow battery application

Energy Technology Data Exchange (ETDEWEB)

Mai, Zhensheng; Bi, Cheng; Dai, Hua [PEMFC Key Materials and Technology Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Zhongshan Road 457, Dalian 116023 (China); Graduate University of the Chinese Academy of Sciences, Beijing 100039 (China); Zhang, Huamin; Li, Xianfeng [PEMFC Key Materials and Technology Laboratory, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Zhongshan Road 457, Dalian 116023 (China)

2011-01-01

Sulfonated poly(tetramethydiphenyl ether ether ketone) (SPEEK) with various degree of sulfonation is prepared and first used as ion exchange membrane for vanadium redox flow battery (VRB) application. The vanadium ion permeability of SPEEK40 membrane is one order of magnitude lower than that of Nafion 115 membrane. The low cost SPEEK membranes exhibit a better performance than Nafion at the same operating condition. VRB single cells with SPEEK membranes show very high energy efficiency (>84%), comparable to that of the Nafion, but at much higher columbic efficiency (>97%). In the self-discharge test, the duration of the cell with the SPEEK membrane is two times longer than that with Nafion 115. The membrane keeps a stable performance after 80-cycles charge-discharge test. (author)

Analysis of electron-irradiated poly-ether ether ketone by X-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Oyabu, Matashige; Kobayashi, Yoshinori; Seguchi, Tadao; Sasuga, Tsuneo; Kudoh, Hisaaki.

1995-01-01

Organic polymers used in atomic power plants or space are damaged by ionizing irradiation. Radicals produced by irradiation cause oxidation, chain scission and crosslinking, all of which lead to degradation of the material. In this paper, the surface of electron-irradiated poly-ether ether ketone (PEEK) was studied by X-ray photoelectron spectroscopy (XPS). The irradiation in air was found to oxidize the PEEK surface producing carboxyl groups, the content of which dependant on the dose. Carboxyl groups were not produced in helium gas. Quantitative spectral analysis indicated that the aromatic structure might be decomposed. Some comparison was made between the semicrystalline and amorphous samples. The oxygen content resulting from irradiation, of semicrystalline PEEK increased more than that of amorphous PEEK. (author)

Application of simplified PC-SAFT to glycol ethers

DEFF Research Database (Denmark)

Avlund, Ane Søgaard; Kontogeorgis, Georgios; Michelsen, Michael Locht

2012-01-01

The simplified PC-SAFT (sPC-SAFT) equation of state is applied for binary glycol ether-containing mixtures, and it is investigated how the results are influenced by inclusion of intramolecular association in the association theory. Three different glycol ethers are examined: 2-methoxyethanol, 2...

Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite

International Nuclear Information System (INIS)

Pavlenko, Ekaterina; Puech, Pascal; Bacsa, Wolfgang; Boyer, François; Olivier, Philippe; Sapelkin, Andrei; King, Stephen; Heenan, Richard; Pons, François; Gauthier, Bénédicte; Cadaux, Pierre-Henri

2014-01-01

Variations in the hardness of a poly (ether ether ketone) beam electrically modified with multi-walled carbon nanotubes (MWCNT, 0.5%-3%) are investigated. It is shown that both rupture and hardness variations correlate with the changes in carbon nanotube concentration when using micro indentation and extended Raman imaging. Statistical analysis of the relative spectral intensities in the Raman image is used to estimate local tube concentration and polymer crystallinity. We show that the histogram of the Raman D band across the image provides information about the amount of MWCNTs and the dispersion of MWCNTs in the composite. We speculate that we have observed a local modification of the ordering between pure and modified polymer. This is partially supported by small angle neutron scattering measurements, which indicate that the agglomeration state of the MWCNTs is the same at the concentrations studied.

Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite

Energy Technology Data Exchange (ETDEWEB)

Pavlenko, Ekaterina; Puech, Pascal; Bacsa, Wolfgang, E-mail: wolfgang.bacsa@cemes.fr [CEMES-CNRS and University of Toulouse, 29 Jeanne Marvig, 31055 Toulouse (France); Boyer, François; Olivier, Philippe [Université de Toulouse, Institut Clément Ader, I.U.T. Université Paul Sabatier - 133C Avenue de Rangueil - B.P. 67701, 31077 Toulouse CEDEX 4 (France); Sapelkin, Andrei [School of Physics and Astronomy, Queen Mary, University of London, Mile End Road, E1 4NS London (United Kingdom); King, Stephen; Heenan, Richard [ISIS Facility, Rutherford Appleton Laboratory, Chilton, OX11 0QX Didcot (United Kingdom); Pons, François; Gauthier, Bénédicte; Cadaux, Pierre-Henri [AIRBUS FRANCE (B.E. M and P Toulouse), 316 Route de Bayonne, 31060 Toulouse (France)

2014-06-21

Variations in the hardness of a poly (ether ether ketone) beam electrically modified with multi-walled carbon nanotubes (MWCNT, 0.5%-3%) are investigated. It is shown that both rupture and hardness variations correlate with the changes in carbon nanotube concentration when using micro indentation and extended Raman imaging. Statistical analysis of the relative spectral intensities in the Raman image is used to estimate local tube concentration and polymer crystallinity. We show that the histogram of the Raman D band across the image provides information about the amount of MWCNTs and the dispersion of MWCNTs in the composite. We speculate that we have observed a local modification of the ordering between pure and modified polymer. This is partially supported by small angle neutron scattering measurements, which indicate that the agglomeration state of the MWCNTs is the same at the concentrations studied.

Theoretical investigation of tautomeric equilibrium in ortho-hydroxy phenyl Schiff bases

Science.gov (United States)

Kluba, M.; Lipkowski, P.; Filarowski, A.

2008-10-01

This Letter presents a study of the tautomeric equilibrium in ortho-hydroxy phenyl Schiff bases. The influence of substitution and solvent (simulated by the self-consistent reaction field model, SCRF) on the energy barrier of the transition state and on proton transfer is investigated. Dependencies of the HOMA and HOSE aromaticity indices on the molecular, transition state, and proton transfer forms were obtained. The state of chelate chain and phenyl ring aromaticity depending on the tautomeric equilibrium is studied.

3-(4-Chlorobenzoyl-4-(4-chlorophenyl-1-phenethylpiperidin-4-ol

Directory of Open Access Journals (Sweden)

Abdullah Aydın

2011-06-01

Full Text Available In the title compound, C26H25Cl2NO2, the piperidine ring adopts a chair conformation with a cis configuration of the carbonyl and hydroxy substituents. The dihedral angle between the aromatic rings of the chlorobenzene groups is 24.3 (2°. The phenyl ring forms dihedral angles of 59.4 (3 and 44.1 (3° with the benzene rings. In the crystal, molecules are linked by intermolecular O—H...N and C—H...O hydrogen bonds and C—H...π interactions into layers parallel to the bc plane.

Radiation chemistry of alternative fuel oxygenates - substituted ethers

International Nuclear Information System (INIS)

Mezyk, S. P.; Cooper, W. J.; Bartels, D. M.; Tobien, T.; O'Shea, K. E.

1999-01-01

The electron beam process, an advanced oxidation and reduction technology, is based in the field of radiation chemistry. Fundamental to the development of treatment processes is an understanding of the underlying chemistry. The authors have previously evaluated the bimolecular rate constants for the reactions of methyl tert-butyl ether (MTBE) and with this study have extended their studies to include ethyl tert-butyl ether (ETBE), di-isopropyl ether (DIPE) and tert-amyl methyl ether (TAME) with the hydroxyl radical, hydrogen atom and solvated electron using pulse radiolysis. For all of the oxygenates the reaction with the hydroxyl radical appears to be of primary interest in the destruction of the compounds in water. The rates with the solvated electron are limiting values as the rates appear to be relatively low. The hydrogen atom rate constants are relatively low, coupled with the low yield in radiolysis, they concluded that these are of little significance in the destruction of the alternative fuel oxygenates (and MTBE)

Diethyl Ether Production as a Substitute for Gasoline

Directory of Open Access Journals (Sweden)

Alviany Riza

2018-01-01

Full Text Available Diethyl ether is one of alternative fuel that could be used as a significant component of a blend or as a complete replacement for transportation fuel. The aim of this research is to produce diethyl ether through dehydration reaction of ethanol with fixed bed reactor using nanocrystalline γ-Al2O3 catalyst. Nanocrystalline γ-Al2O3 catalyst was synthesized by precipitation method using Al(NO33.9H2O as precursors and NH4OH as the precipitating agent. Dehydration reaction was performed at temperature range of 125 to 225°C. The result shows that synthesized γ-Al2O3 catalyst gave higher ethanol conversion and diethyl ether yield than that of commercial Al2O3 catalyst. The use of synthesized γ-Al2O3 catalyst could reach ethanol conversion as high as 94.71% and diethyl ether yield as high as 11,29%.

Carbonyl{3,3′-di-tert-butyl-5,5′-dimethoxy-2,2′-bis[(4,4,5,5-tetramethyl-1,3,2-dioxaphospholan-2-yloxy]biphenyl-κ2P,P′}hydrido(triphenylphosphane-κPrhodium(I diethyl ether trisolvate

Directory of Open Access Journals (Sweden)

Detlef Selent

2013-01-01

Full Text Available In the title compound, [RhH(C74H68O8P2(C18H15P(CO]·3C4H10O, the CHP3 coordination set at the RhI ion is arranged in a distorted trigonal–bipyramidal geometry with the P atoms adopting equatorial coordination sites and the C atom of the carbonyl ligand as well as the H atom adopting the axial sites. The asymmetric unit contains two very similar molecules of the rhodium complex, two half-occupied diethyl ether molecules and further diethyl ether solvent molecules which could not be modelled successfully. Therefore contributions of the latter were removed from the diffraction data using the SQUEEZE procedure in PLATON [Spek (2009. Acta Cryst. D65, 148–155].

A highly sensitive and selective dimethyl ether sensor based on cataluminescence.

Science.gov (United States)

Zhang, Runkun; Cao, Xiaoan; Liu, Yonghui; Peng, Yan

2010-07-15

A sensor for detecting dimethyl ether was designed based on the cataluminescence phenomenon when dimethyl ether vapors were passing through the surface of the ceramic heater. The proposed sensor showed high sensitivity and selectivity to dimethyl ether at an optimal temperature of 279 degrees C. Quantitative analysis were performed at a wavelength of 425 nm, the flow rate of carrier air is around 300 mL/min. The linear range of the cataluminescence intensity versus concentration of dimethyl ether is 100-6.0x10(3) ppm with a detection limit of 80 ppm. The sensor response time is 2.5 s. Under the optimized conditions, none or only very low levels of interference were observed while the foreign substances such as benzene, formaldehyde, ammonia, methanol, ethanol, acetaldehyde, acetic acid, acrolein, isopropyl ether, ethyl acetate, glycol ether and 2-methoxyethanol were passing through the sensor. Since the sensor does not need to prepare and fix up the granular catalyst, the simple technology reduces cost, improves stability and extends life span. The method can be applied to facilitate detection of dimethyl ether in the air. The possible mechanism of cataluminescence from the oxidation of dimethyl ether on the surface of ceramic heater was discussed based on the reaction products. Copyright 2010 Elsevier B.V. All rights reserved.

Unitary information ether and its possible applications

International Nuclear Information System (INIS)

Horodecki, R.

1991-01-01

The idea of information ether as the unitary information field is developed. It rests on the assumption that the notion of information is a fundamental category in the description of reality and that it can be defined independently from the notion of probability itself. It is shown that the information ether provides a deterministic background for the nonlinear wave hypothesis and quantum cybernetics. (orig.)

The Ether Wind and the Global Positioning System.

Science.gov (United States)

Muller, Rainer

2000-01-01

Explains how students can perform a refutation of the ether theory using information from the Global Positioning System (GPS). Discusses the functioning of the GPS, qualitatively describes how position determination would be affected by an ether wind, and illustrates the pertinent ideas with a simple quantitative model. (WRM)

Use of open-cell resilient polyurethane foam loaded with crown ether for the preconcentration of uranium from aqueous solutions

International Nuclear Information System (INIS)

Abou-Mesalam, M.M.; El-Naggar, I.M.; Abdel-Hai, M.S.; El-Shahawi, M.S.

2003-01-01

The preconcentration of uranium from aqueous solutions on open-cell resilient polyurethane foams (PUF) impregnated with crown ether as an organic extractant in different conditions was investigated. The data showed that 50 minutes is a sufficient time to attain equilibrium with a maximum extraction percentage for uranium ion on polyurethane foams loaded with crown ether. Also the extraction percentage of uranium is increased markedly with increasing the pH values up to pH ∼ 6 and displayed the lowest extraction at 8 > pH > 6. The different isotherms of uranium sorption have shown that the sorption followed a Freundlich isotherm. Column studies have been carried out in order to extend these studies to the plant scale. From the data of column sorption and breakthrough curves, the height equivalent of theoretical plates (HETP), and breakthrough capacity which affect the efficiency of the column have been calculated and found to be 1.03 mm/plate, 64 ± 5 and 58.3 mg uranium/gram polyurethane foam impregnated with crown ether, respectively. (author)

Synthesis of Poly(vinyl ether) Thermoplastic Elastomers Having Functional Soft Segments

OpenAIRE

今枝, 嗣人; 漆崎, 美智遠; 阪口, 壽一; 橋本, 保; Tsuguto, IMAEDA; Michio, URUSHISAKI; Toshikazu, SAKAGUCHI; Tamotsu, HASHIMOTO

2013-01-01

The ABA-type triblock copolymers consisting of poly(2-adarnantyl vinyl ether) [poly(2-AdVE) as outer hard segments and poly(6-acetoxyhexyl vinyl ether) [poly(AcHVE)] poly(6-hydroxyhexyl vinyl ether) [poly(H HVE)], or poly(2-(2-methoxyethoxy)ethyl vinyl ether [poly(MOEOVE)] as inner soft segments were synthesized by sequential living cationic polymerization. Despite the presence of polar functional groups such as ester, hydroxy, and oxyethylene units in their soft segments, the two polymer seg...

1-[3-(2-Nitrophenyl-5-phenyl-2-pyrazolin-1-yl]ethanone

Directory of Open Access Journals (Sweden)

Huan-Mei Guo

2010-07-01

Full Text Available The title compound, C17H15N3O3, was prepared from 1-(2-nitrophenyl-3-phenylprop-2-en-1-one and hydrazine. The dihedral angle between the benzene and phenyl rings is 74.55 (2°. The pyrazoline ring is in a slight envelope conformation with the C atom bonded to the phenyl ring forming the flap. In the crystal structure, weak intermolecular C—H...O hydrogen bonds connect molecules into chains along [100].

The breakdown of vinyl ethers as a two-center synchronous reaction

Science.gov (United States)

Pokidova, T. S.; Shestakov, A. F.

2009-11-01

The experimental data on the molecular decomposition of vinyl ethers of various structures to alkanes and the corresponding aldehydes or ketones in the gas phase were analyzed using the method of intersecting parabolas. The enthalpies and kinetic parameters of decomposition were calculated for 17 reactions. The breakdown of ethers is a two-center concerted reaction characterized by a very high classical potential barrier to the thermally neutral reaction (180-190 kJ/mol). The kinetic parameters (activation energies and rate constants) of back reactions of the formation of vinyl ethers in the addition of aldehydes or ketones to alkanes were calculated using the method of intersecting parabolas. The factors that influenced the activation energy of the decomposition and formation of ethers were discussed. Quantum-chemical calculations of several vinyl ether decomposition reactions were performed. Ether formation reactions were compared with the formation of unsaturated alcohols as competitive reactions, which can occur in the interaction of carbonyl compounds with alkenes.

Novel 2-phenyl-3-{4’-[N-(4”-aminophenylcarbamoyl]-phenyl}-quinazoline-4(3Hone-6-sulphonic acidbased mono azo reactive dyes

Directory of Open Access Journals (Sweden)

DIVYESH R. PATEL

2011-02-01

Full Text Available A series of new heterocyclic mono azo reactive dyes 7a–m were prepared by diazotization of 2-phenyl-3-{4’-[N-(4”-aminophenylcarbamoyl]-phenyl}-quinazoline-4(3H-one-6-sulphonic acid (3 and coupling with various cyanurated coupling components 6a–m and their dyeing performance on silk, wool and cotton fibres was assessed. These dyes were found to give a variety of colour shades with very good depth and levelness on the fibres. All the compounds were identified by conventional method (IR and 1H-NMR and elemental analyses. The percentage dye bath exhaustion on different fibres was reasonably good and acceptable. The dyed fibre showed moderate to very good fastness to light, washing and rubbing.

Study on the metabolism of 15 p-131iodine phenyl pentadecanoic acid [p-iodine phenyl pentadecanoic acid] as a tracer of free fatty acids in comparison to 1-14C-palmitic acid (C-palmitic acid)

International Nuclear Information System (INIS)

Sauer, J.W.

1986-01-01

In an animal experiment under identical metabolic influences the metabolism of a new radiopharmaceutical, 15 p- 131 iodine phenyl pentadecanoic acid (IPPA), was compared to the marked physiological fatty acid, 1- 14 C-palmitic acid (PA). The pharmacological kinetics of both tracers in tissues with widely varied turnover rates of fatty acids (heart, lung, liver, kidney, spleen, small intestine, skeletal muscle) was studied. By alkali extraction of the tissue lipids and then a chromatographic separation of the lipid fractions quantitatively comparable statements about the metabolism of PA and IPPA were made possible. The analyses of autoradiographs of the chromatographically separated lipids show a qualitatively congruous assimilation of both markers in the major lipid fractions. The quantitative evaluation shows minor differences as a result of a preferred assimilation of IPPA in triglycerides and of PA in phospholipids. The fractionated separation of tissue lipids which had been marked with PA and IPPA in vivo agrees very well with values which have been determined by other authors using 14 C- or 3 H-marked fatty acids. The close correlation of the tissue-specific metabolism kinetics of both markers makes it clear that both fatty acids are metabolized by similar, respectively, primarily identical metabolic pathyways. In conclusion, this study makes clear the extensive congruence of the metabolism kinetics of IPPA and the kinetics of the physiological palmitic acid. As a result of the presented results of the γ-radiating radiopharmaceutical IPPA as a free fatty acid analog new possibilities for the non-invasive external comprehension of lipid metabolism are opened up, whose use especially in the diagnostic of heart diseases promises success. (orig./MG) [de

Fast liquid chromatography-tandem mass spectrometry for the analysis of bisphenol A-diglycidyl ether, bisphenol F-diglycidyl ether and their derivatives in canned food and beverages.

Science.gov (United States)

Gallart-Ayala, H; Moyano, E; Galceran, M T

2011-03-25

In this work a fast liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) method using a C18 Fused Core™ column, was developed for the simultaneous analysis of bisphenol A diglycidyl ether (BADGE), bisphenol A (2,3-dihydroxypropyl) glycidyl ether (BADGE·H(2)O), bisphenol A bis(2,3-dihydroxypropyl) ether (BADGE·2H(2)O), bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether (BADGE·HCl), bisphenol A bis(3-chloro-2-hydroxypropyl) ether (BADGE·2HCl) and bisphenol A (3-chloro-2-hydroxypropyl)(2,3-dihydroxypropyl ether) (BADGE·HCl·H(2)O) and bisphenol F diglycidyl ether (BFDGE), bisphenol F bis(2,3-dihydroxypropyl) ether (BFDGE·2H(2)O), bisphenol F bis(3-chloro-2-hydroxypropyl) ether (BFDGE·2HCl). The LC method was coupled with a triple quadrupole mass spectrometer, using an ESI source in positive mode and using the [M+NH(4)](+) adduct as precursor ion for tandem mass spectrometry experiments. The method developed was applied to the determination of these compounds in canned soft drinks and canned food. OASIS HLB solid phase extraction (SPE) cartridges were used for the analysis of soft drinks, while solid canned food was extracted with ethyl acetate. Method limits of quantitation ranged from 0.13 μgL(-1) to 1.6 μgL(-1) in soft drinks and 1.0 μgkg(-1) to 4.0 μgkg(-1) in food samples. BADGE·2H(2)O was detected in all the analyzed samples, while other BADGEs such as BADGE·H(2)O, BADGE·HCl·H(2)O, BADGE·HCl and BADGE·2HCl were also detected in canned foods. Copyright © 2011 Elsevier B.V. All rights reserved.

Influence of the structure of bile acids on their partition coefficient in dibutyl ether and chloroform

Directory of Open Access Journals (Sweden)

Sebenji Ana S.

2015-01-01

Full Text Available Bile acids are well known natural surfactants able to modify the per­meability of biological membranes. The logarithm of partition coefficient between, tradi­tionally used, n-octanol and water is a measure of lipophilicity as a predictor of solute membrane partitioning. The aim of this work was to determine partition coefficients of bile acids in a mixture of water and chloroform and dibutyl ether at different pH values and with addition of different concentrations of sodium ions, and to examine the influence of the structure of bile acid nucleus on measured partition coefficients. Partition coefficients of three bile acid salts were determined using shake-flask method and the concentration of bile acids was determined after twelve hours of shaking at the room temperature in aqueous and organic layer using reversed phase HPLC with DAD detector on 210 nm. For all three analysed bile acid salts values of logP are lower in dibutyl ether than in chloroform. At certain pH values, curves representing the dependence of partition coeffi­cient on pH value intersect, and these are the pH values for which partition coefficients are the same for both solvents. Increasing the solution ionic strength, this intersection is shifted toward lower pH values. It is found that, for both organic solvents, after the addition of hy­droxyl group in the steroid nucleus (i.e. if the bile acid is less hydrophobic the value of logP falls, especially if more hydroxyl groups are present. With chloroform as a solvent, system quickly comes to excess with electrolyte ions than with dibutyl ether. [Projekat Ministarstva nauke Republike Srbije, br. 172021

The fluorescence behaviour of methyl and phenyl salicylate

Science.gov (United States)

Ford, D.; Thistlethwaite, P. J.; Woolfe, G. J.

1980-01-01

Fluorcsccnce lifetimes tor the 450 nm emission of methyl and phenyl salicylate in various solvents have been measured. Qucnching studics on the 340 nm fluorescence of these molecules point to the existence of three distinct ground state conformers.

Synthesis and properties of complexes of 1-phenyl-2,3-dimetylpyrazolone-5-thione with metals

International Nuclear Information System (INIS)

Bikkulova, A.T.; Kapina, A.P.; Medvedeva, E.A.

1985-01-01

Cadmium complexes with thiopyrine (1-phenyl-2.3-dimethylpyrazolone-5-thione) (R) of the composition CdR 2 X 2 are obtained by precipitation from hydrochloric acid solutions at pH=1 and at chloride and bromide (X) excess. The formation of coordination bond of a metal through the sulphur atom is established by the IR- and NMR-spectroscopy methods. Fungicidal activity of the compositions obtained is detected

Poly(mono/diethylene glycol n-tetradecyl ether vinyl ethers with Various Molecular Weights as Phase Change Materials

Directory of Open Access Journals (Sweden)

Dongfang Pei

2018-02-01

Full Text Available At present, research on the relationship of comb-like polymer phase change material structures and their heat storage performance is scarce. Therefore, this relationship from both micro and macro perspectives will be studied in this paper. In order to achieve a high phase change enthalpy, ethylene glycol segments were introduced between the vinyl and the alkyl side chains. A series of poly(mono/diethylene glycol n-tetradecyl ether vinyl ethers (PC14EnVEs (n = 1, 2 with various molecular weights were polymerized by living cationic polymerization. The results of PC14E1VE and PC14E2VE showed that the minimum number of carbon atoms required for side-chain crystallization were 7.7 and 7.2, which were lower than that reported in the literature. The phase change enthalpy 89 J/g (for poly(mono ethylene glycol n-tetradecyl ether vinyl ethers and 86 J/g (for poly(hexadecyl acrylate were approximately equal. With the increase of molecular weight, the melting temperature, the melting enthalpy, and the initial thermal decomposition temperature of PC14E1VE changed from 27.0 to 28.0 °C, from 95 to 89 J/g, and from 264 to 287 °C, respectively. When the number average molar mass of PC14EnVEs exceeded 20,000, the enthalpy values remained basically unchanged. The introduction of the ethylene glycol chain was conducive to the crystallization of alkyl side chains.

Sulfonated polyphenyl ether by electropolymerization

International Nuclear Information System (INIS)

Hou Hongying; Vacandio, Florence; Di Vona, Maria Luisa; Knauth, Philippe

2012-01-01

Highlights: ► Sulfonated polyphenyl ether was for the first time electropolymerized. ► This technique allows the economical preparation of ionomeric membranes for electrochemical energy technologies. ► The mechanism of electropolymerization was discussed in detail. - Abstract: Electropolymerization of sulfonated phenol was for the first time achieved and studied by cyclic voltammetry (CV) and chronoamperometry on stainless steel substrates. The obtained sulfonated polyphenyl ether was characterized in terms of impedance spectroscopy, nuclear magnetic resonance (NMR), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and Fourier-Transform Infrared (FTIR) spectroscopy. Dense films of micrometer thickness can be obtained; the proton conductivity is about 3 mS/cm at room temperature.

Diethyl Ether Production Process with Various Catalyst Type

Directory of Open Access Journals (Sweden)

Widayat Widayat

2012-12-01

Full Text Available Several H-zeolite and HZSM-5 catalysts was preparated and their characters have also been investigated. H-zeolit Catalyst was preparated from Natural Zeolite that obtained from Malang District and Gunung Kidul District. Diethyl ether was produced by Ethanol with concentration of 95%. This research use fixed bed reactor that 1 gram of catalyst as bed catalyst, atmospheric pressure and temperature 140oC as the operating condition. Ethanol vapor from vaporization tank was driven by 200 ml/min Nitrogen stream. The responds in this research is liquid product concentration; diethyl ether, ethanol, methanol and water concentration. The results showed that the largest ethanol conversion was produced by the use of 56.44% HZSM-5 and the largest yield of diethyl ether diethyl was produced by the use of alumina and H-zeolite catalyst. The larger ratio between natural zeolite with HCl solvent will produce the larger surface area of catalyst and ethanol conversion. The largest ethanol conversion was produced at reactan ratio 1:20. [Keywords:  catalyst; ethanol conversion; dehydration process; yield of diethyl ether; natural zeolite].

FORMULA ESTABLISHMENT OF COLORLESS Pb(II COMPLEX WITH N-BENZOYL-N-PHENYL HYDROXYLAMINE (BPA USING ATOMIC ABSORPTION SPECTROSCOPY

Directory of Open Access Journals (Sweden)

Dhananjay B Sarode

2012-02-01

Full Text Available A new method for determination of stoichiometry of colorless complexes by using atomic absorption spectrophotometric technique in continuous variation method and slope ratio method was described here. This method can be used in same manner as that of mole ratio method and slope ratio method. In this method atomic absorption spectroscopy was used instead of UV-Vis spectrophotometry. Atomic absorption spectrophotometric technique is superior to UV-Vis spectrophotometry as it can be applied to colorless soluble complexes. Pb(II and n-benzoyl-n-phenyl hydroxylamine react to form colorless complex at pH 6.5, which can be easily determined by this method. It was found that Pb(II forms 1:2 complex with n-benzoyl-n-phenyl hydroxylamine and is quantitatively extracted back to aqueous solution for AAS analysis.

Photoelectrochemical solar energy conversion based on blend of poly(3-hexylthiophene (P3HT and 1-(3-methoxycarbonyl propyl-1-phenyl [6,6]C61 (PCBM

Directory of Open Access Journals (Sweden)

Teketel Yohannes

2012-08-01

Full Text Available A solid-state photoelectrochemical solar energy conversion device based on blend of poly(3-hexylthiophene (P3HT and 1-(3-methoxycarbonylpropyl-1-phenyl[6,6]C61 (PCBM, and an amorphous poly(ethylene oxide complexed with I3-/I- redox couple has been constructed and characterized. The photoelectrochemical performance parameters of the device were compared with pure P3HT and P3HT:C60 blend solid-state photoelectrochemical cell. The current density-voltage characteristics in the dark and under white light illumination and photocurrent spectra for front and backside illuminations have been studied. An open-circuit voltage of 140 mV and a short-circuit current density of 28.4 μA/cm2 at light intensity of 100 mW/cm2; IPCE% of 1.52% for front side illumination (ITO|PEDOT and IPCE% of 0.17% for backside illumination (ITO|P3HT:PCBM at a wavelength of 510 nm were obtained. The dependence of the short-circuit current density and an open-circuit voltage on the light intensity and time have also been studied.DOI: http://dx.doi.org/10.4314/bcse.v26i2.12

(2S-1,1-Dichloro-2-(2-chlorophenyl-2-(4-chlorophenylethane

Directory of Open Access Journals (Sweden)

Lars Eriksson

2009-02-01

Full Text Available The title compound, C14H10Cl4, is easily crystallized while the other enantiomorph only forms an oil upon crystallization attempts. The title compound has a considerably higher density, ρ ≃ 1.562 Mg m−3 compared to the racemic substance, ρ ≃ 1.514 Mg m−3. This is supported by the fact there are two intermolecular halogen–halogen contacts in the title compound compared with only one the racemic compound. The dihedral angle between the two phenyl rings is 76.83 (5°

Synthesis of racemic [3-11C]phenylalanine and [3-11C] DOPA

International Nuclear Information System (INIS)

Halldin, C.; Laangstroem, B.

1984-01-01

The synthesis of racemic [3- 11 C]phenylalanine and [3- 11 C]DOPA is reported. The [ 11 C]benzaldehyde and [ 11 C]veratraldehyde prepared in a two-step reaction from the corresponding [ 11 C]acid salt and [ 11 C]alcohol, by means of selective oxidation with tetrabutylammonium hydrogen chromate, were reacted with 2-phenyl-5-oxazolone or 2-(4-chloro)phenyl-5-oxazolone in the presence of a tertiary amine to give the corresponding [α- 11 C]-4-arylene-2-aryl-5-oxazolones. Ring opening of these olefins, hydrogenation, and removal of protecting groups was carried out in one step using hydroiodic cid/phosphorus, with the production of the racemic [3- 11 C]amino acids in 8-30% radiochemical yield (starting with 11 CO 2 ) within 52-60 min (including LC separation). (author)

Characterization of a poly(ether urethane)-based controlled release membrane system for delivery of ketoprofen

International Nuclear Information System (INIS)

Macocinschi, Doina; Filip, Daniela; Vlad, Stelian; Oprea, Ana Maria; Gafitanu, Carmen Anatolia

2012-01-01

Highlights: ► Ketoprofen incorporation in poly(ether urethane) microporous membrane. ► Moisture sorption properties of as-cast membrane. ► Drug release mechanisms in function of pH and composition of membranes. - Abstract: A poly(ether urethane) based on polytetrahydrofuran containing hydroxypropyl cellulose for biomedical applications was tested for its biocompatibility. Ketoprofen was incorporated (3% and 6%) in the polyurethane matrix as an anti-inflammatory drug. Kinetic and drug release mechanisms were studied. The pore size and pore size distribution of the polyurethane membranes were investigated by scanning electron microscopy. Surface tension characteristics as well as moisture sorption properties such as diffusion coefficients and equilibrium moisture contents of the membrane material were studied. It was found that kinetics and release mechanisms are in function of medium pH, composition of polymer–drug system, pore morphology and pore size distribution. Prolonged nature of release of ketoprofen is assured by low amount of drug in polyurethane membrane and physiological pH.

40 CFR 721.2577 - Copper complex of (substituted sulfonaphthyl azo substituted phenyl) disulfonaphthyl azo, amine...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Copper complex of (substituted... Copper complex of (substituted sulfonaphthyl azo substituted phenyl) disulfonaphthyl azo, amine salt... substances identified generically as copper complex of (substituted sulfonaphthyl azo substituted phenyl...

Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

Directory of Open Access Journals (Sweden)

Feng Zhao

2018-02-01

Full Text Available Poly-ether-ether-ketone (PEEK fabricated by fused deposition modeling for medical applications was evaluated in terms of mechanical strength and in vitro cytotoxicity in this study. Orthogonal experiments were firstly designed to investigate the significant factors on tensile strength. Nozzle temperature, platform temperature, and the filament diameter were tightly controlled for improved mechanical strength performance. These sensitive parameters affected the interlayer bonding and solid condition in the samples. Fourier transform infrared (FTIR spectrometry analysis was secondly conducted to compare the functional groups in PEEK granules, filaments, and printed parts. In vitro cytotoxicity test was carried out at last, and no toxic substances were introduced during the printing process.

Densely quaternized poly(arylene ether)s with distinct phase separation for highly anion-conductive membranes

Science.gov (United States)

Hu, Yuanfang; Wang, Bingxi; Li, Xiao; Chen, Dongyang; Zhang, Weiying

2018-05-01

To develop high performance anion exchange membranes (AEMs), a novel bisphenol monomer bearing eight benzylmethyl groups at the outer edge of the molecule was synthesized, which after condensation polymerization with various amounts of 4,4‧-dihydroxydiphenylsulfone and 4,4‧-difluorobenzophenone yielded novel poly(arylene ether)s with densely located benzylmethyl groups. These benzylmethyl groups were then converted to quaternary ammonium groups by radical-initiated bromination and quaternization in tandem, leading to the emergence of densely quaternized poly(arylene ether sulfone)s (QA-PAEs) with controlled ion exchange capacities (IECs) ranging from 1.61 to 2.32 mmol g-1. Both small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) studies revealed distinct phase separation in the QA-PAEs. The QA-PAE-40 with an IEC of 2.32 mmol g-1 exhibited a Br- conductivity of 9.2 mS cm-1 and a SO42- conductivity of 14.0 mS cm-1 at room temperature, much higher than those of a control membrane with a similar IEC but without obvious phase separation. Therefore, phase separation of AEMs was validated to be advantageous for the efficient conducting of anions. The experimental results also showed that the QA-PAEs were promising AEM materials, especially for non-alkaline applications.

Undoped poly (phenyl sulfone) for radiation detection

International Nuclear Information System (INIS)

Nakamura, Hidehito; Shirakawa, Yoshiyuki; Sato, Nobuhiro; Kitamura, Hisashi; Takahashi, Sentaro

2015-01-01

Undoped aromatic ring polymers are potential scintillation materials. Here, we characterise poly (phenyl sulfone) (PPSU) for radiation detection. The amber-coloured transparent resin emits bluish-white fluorescence with 390-nm maximum. It has an excitation maximum of 340 nm, and has a density of 1.29 g/cm 3 . The effective refractive index based on its emission spectrum is 1.75. The light yield is almost equal to that of poly (ethylene terephthalate), which is a transparent resin. These results demonstrate that PPSU can be used as a component substrate in polymer blends for altering optical characteristics. - Highlights: • Poly (phenyl sulfone) (PPSU) has suitable characteristics as a scintillation material. • PPSU is an amber-coloured transparent resin that emits bluish white fluorescence with 390-nm maximum. • The 1.75 effective refractive index over the emission spectrum is relatively high. • The light yield is 0.95 times that of poly (ethylene terephthalate), which is a transparent resin. • PPSU can potentially alter optical characteristics in polymer blends

Congenital malformations and maternal occupational exposure to glycol ethers

NARCIS (Netherlands)

Cordier, S; Bergeret, A; Goujard, J; Ha, MC; Ayme, S; Calzolari, E; DeWalle, HEK; KnillJones, R; Candela, S; Dale, [No Value; Dananche, B; deVigan, C; Fevotte, J; Kiel, G; Mandereau, L

Glycol ethers are found in a wide range of domestic and industrial products, many of which are used in women's work environments. Motivated by concern about their potential reproductive toxicity, we have evaluated the risk of congenital malformations related to glycol ether exposure during preg

Photochemical oxidation processes for the elimination of phenyl-urea herbicides in waters

International Nuclear Information System (INIS)

Benitez, F. Javier; Real, Francisco J.; Acero, Juan L.; Garcia, Carolina

2006-01-01

Four phenyl-urea herbicides (linuron, chlorotoluron, diuron, and isoproturon) were individually photooxidized by monochromatic UV radiation in ultra-pure aqueous solutions. The influence of pH and temperature on the photodegradation process was established, and the first-order rate constants and quantum yields were evaluated. The sequence of photodecomposition rates was: linuron > chlorotoluron > diuron > isoproturon. The simultaneous photooxidation of mixtures of the selected herbicides in several types of waters was then performed by means of UV radiation alone, and by UV radiation combined with hydrogen peroxide. The types of waters used were: ultra-pure water, a commercial mineral water, a groundwater, and a lake water. The influence of the independent variables in these processes - the presence or absence of tert-butyl alcohol, types of herbicide and waters, and concentration of hydrogen peroxide - were established and discussed. A kinetic study was performed using a competitive kinetic model that allowed various rate constants to be evaluated for each herbicide. This kinetic model allows one to predict the elimination of these phenyl-urea herbicides in contaminated waters by the oxidation systems used (UV alone and combined UV/H 2 O 2 ). The herbicide concentrations predicted by this model agree well with the experimental results that were obtained

Photochemical oxidation processes for the elimination of phenyl-urea herbicides in waters

Energy Technology Data Exchange (ETDEWEB)

Benitez, F. Javier [Departamento de Ingenieria Quimica y Energetica, Universidad de Extremadura, 06071 Badajoz (Spain)]. E-mail: javben@unex.es; Real, Francisco J. [Departamento de Ingenieria Quimica y Energetica, Universidad de Extremadura, 06071 Badajoz (Spain); Acero, Juan L. [Departamento de Ingenieria Quimica y Energetica, Universidad de Extremadura, 06071 Badajoz (Spain); Garcia, Carolina [Departamento de Ingenieria Quimica y Energetica, Universidad de Extremadura, 06071 Badajoz (Spain)

2006-11-16

Four phenyl-urea herbicides (linuron, chlorotoluron, diuron, and isoproturon) were individually photooxidized by monochromatic UV radiation in ultra-pure aqueous solutions. The influence of pH and temperature on the photodegradation process was established, and the first-order rate constants and quantum yields were evaluated. The sequence of photodecomposition rates was: linuron > chlorotoluron > diuron > isoproturon. The simultaneous photooxidation of mixtures of the selected herbicides in several types of waters was then performed by means of UV radiation alone, and by UV radiation combined with hydrogen peroxide. The types of waters used were: ultra-pure water, a commercial mineral water, a groundwater, and a lake water. The influence of the independent variables in these processes - the presence or absence of tert-butyl alcohol, types of herbicide and waters, and concentration of hydrogen peroxide - were established and discussed. A kinetic study was performed using a competitive kinetic model that allowed various rate constants to be evaluated for each herbicide. This kinetic model allows one to predict the elimination of these phenyl-urea herbicides in contaminated waters by the oxidation systems used (UV alone and combined UV/H{sub 2}O{sub 2}). The herbicide concentrations predicted by this model agree well with the experimental results that were obtained.

Kinetics and Mechanism of Oxidation of Diethyl Ether by Chloramine-T in Acidic Medium

Directory of Open Access Journals (Sweden)

Y. I. Hassan

2012-01-01

Full Text Available The kinetics of oxidation of diethyl ether (DE with sodium N-chloro-p-toluenesulphonamide (CAT in hydrochloric acid solution has been studied at (313°K.The reaction rate show a first order dependence on [CAT] and fractional order dependence on each [DE] and [H+] .The variation of ionic strength of the medium has no significant effect on the reaction rate , addition of p-toluenesulphonamide (p-TSA affects the reaction rate marginally the rate increased with decreasing dielectric constant of the medium , the stochiometry of the reaction was found to be 1:2 and oxidation products were identified , A Michaelis – Menten type mechanism has been suggested to explain the results.The equilibrium and the decomposition constants of CAT – diethyl ether complex have been evaluated. Thermodynamic parameters were computed by studying reaction at temperatures range ( 308 – 323°K for the rate limiting step and for the observed first order constants by the linear Arrhenius plot. The mechanism proposed and the derived rate law are consistent with observed kinetics.

Functionalized mesoporous silicas with crown ether moieties for selective adsorption of lithium ions in artificial sea water.

Science.gov (United States)

Sung, Soo Park; Moorthy, Madhappan Santha; Song, Hyun-Jin; Ha, Chang-Sik

2014-11-01

Lithium ion has been increasingly recognized in a wide range of industrial applications. In this work, we studied on the adsorption of Li+ in the artificial seawater with high selectivity using methyl-crown ether (AC-SBA-15) and aza-crown ether (HMC-SBA-15) moieties-functionalized mesoporous silica materials. First, methyl-crown ether and aza-crown ether moieties-functionalized mesoporous silica materials were synthesized via two-step post-synthesis process using a grafting method. The functionalized materials were employed to the metal ion adsorption from aqueous solution (artificial seawater) containing Li+, Co2+, Cr3+ and Hg2+. The prepared hybrid material showed high selectivity for Li+ ion in the artificial seawater at pH 8.0. The absorbed amount of Li+ was 73 times higher than Cr3+ for aza-crown ether containing AC-SBA-15 as an absorbent. The absorbed amount of Co2+ (4.5 x 10(-5) mol/g), Cr3+ (1.5 x 10(-5) mol/g) and Hg2+ (2.25 x 10(-4) mol/g) were remarkably lower than the case of Li+. On the other hand, the absorbed amount of various metal ions of HMC-SBA-15 with amine groups in alky chains and crown ether moieties were 1.1 x 10(-3) mol/g for Li+, 5.0 x 10(-5) mol/g for Co2+, 2.9 x 10(-4) mol/g for Cr3+, 2.8 x 10(-4) mol/g for Hg2+ mol/g, respectively.

2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile

Directory of Open Access Journals (Sweden)

Nawal Mishriky

2013-02-01

Full Text Available 2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile (4 was synthesized via nucleophilic substitution reaction of 1-methylpiperazine with 2-bromo analogue 3. The latter was obtained through bromination (Br2/AcOH of 2-[3-oxo-1-phenyl-3-(thiophen-2-ylpropyl]malononitrile (2.

Determination and structural correlation of the pKa values of p-substituted trans-2,3-epoxy-4-oxo-4-phenylbutanoic acids

Directory of Open Access Journals (Sweden)

I. JURANIC

2000-11-01

Full Text Available The pKa values for a series of eight p-substituted trans-2,3-epoxy-4-phenyl butanoic acids (p-substituted trans-b-aroylepoxyacrylic acids have been determined potentiometrically in aqueous media at 25°C at an ionic strength of 0.1 mol/dm3 (NaCl. The transmission of polar effects from the substituents on the phenyl nucleus to the carboxylic group through the side chain involving a carbonyl group and an epoxide ring was investigated. The pKa values were correlated with structure using the Hammett, Taft and Yukawa-Tsuno approaches. The Hammett r constant (0.34 was compared with analogue values for structurally similar acids.

Vibrational spectroscopic (FT-IR, FT-Raman) and quantum mechanical study of 4-(2-chlorophenyl)-2-ethyl-9-methyl-6H-thieno[3,2-f] [1,2,4]triazolo[4,3-a][1,4] diazepine

Science.gov (United States)

Kuruvilla, Tintu K.; Prasana, Johanan Christian; Muthu, S.; George, Jacob

2018-04-01

The spectroscopic properties of 4-(2-chlorophenyl)-2-ethyl-9-methyl-6H-thieno [3,2-f] [1,2,4] triazolo [4,3-a] [1,4] diazepine were investigated in the present study using FT-IR and FT-Raman techniques. The results obtained were compared with quantum mechanical methods, as it serves as an important tool in interpreting and predicting vibrational spectra. The optimized molecular geometry, the vibrational wavenumbers, the infrared intensities and Raman scattering were calculated using density functional theory B3LYP method with 6-311++g (d,p) basis set. All the experimental results were in line with the theoretical data. The molecular electrostatic potential (MEP) and HOMO LUMO energies of the title compound were accounted. The results indicated that the title compound has a lower softness value (0.27) and high electrophilicity index (4.98) hence describing its biological activity. Further, natural bond orbital was also analyzed as part of the work. Fukui functions were calculated in order to explain the chemical selectivity or the reactivity site in 4-(2-chlorophenyl)-2-ethyl-9-methyl-6H-thieno [3,2-f] [1,2,4] triazolo [4,3-a] [1,4] diazepine. The thermodynamic properties of the title compound were closely examined at different temperatures. It revealed the correlations between heat capacity (C), entropy (S) and enthalpy changes (H) with temperatures. The paper further explains that the title compound can act as good antidepressant through molecular docking studies.

1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine inhibits proton motive force in energized liver mitochondria

International Nuclear Information System (INIS)

Singh, Y.; Bhatnagar, R.; Sidhu, G.S.; Batra, J.K.; Krishna, G.

1989-01-01

It is known that 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), which induces Parkinson's-like disease in primates and humans, depletes hepatocytes of ATP and subsequently causes cell death. Incubation of rat liver mitochondria with MPTP and 1-methyl-4-phenyl pyridinium ion (MPP+) significantly inhibited incorporation of 32 Pi into ATP. MPTP and MPP+ inhibited the development of membrane potential and pH gradient in energized rat liver mitochondria, suggesting that reduction of the proton motive force may have reduced ATP synthesis. Since deprenyl, an inhibitor of monoamine oxidase, prevented the formation of MPP+ and inhibited the decrease in membrane potential caused by MPTP, but not that caused by MPP+, these effects of MPTP, as well as cell death, probably were mediated by MPP+. This mechanism may play a role in the specific loss of dopaminergic neurons resulting in MPTP-induced Parkinson's disease

Structure and electronic properties of Zn-tetra-phenyl-porphyrin single- and multi-layers films grown on Fe(001)-p(1 × 1)O

Energy Technology Data Exchange (ETDEWEB)

Bussetti, Gianlorenzo, E-mail: gianlorenzo.bussetti@polimi.it; Calloni, Alberto; Celeri, Matteo; Yivlialin, Rossella; Finazzi, Marco; Bottegoni, Federico; Duò, Lamberto; Ciccacci, Franco

2016-12-30

Highlights: • ZnTPP/Fe(001)-p(1 × 1)O is a prototypical system to investigate the porphyrin/thin metal oxide film interaction. • Oxygen layer plays a crucial role in decreasing the porphyrin-substrate interaction. • An ordered ZnTPP (5 × 5) reconstruction is found on the nominal 1 ML-thick film. • On Fe(001)-p(1 × 1)O the electronic properties of the ZnTPP film are preserved with respect to other substrates. - Abstract: The structure and the electronic properties of thin (1 molecular layer) and thick (20 molecular layers) Zn-tetra-phenyl-porphyrin (ZnTPP) films grown on a single metal oxide (MO) layer, namely Fe(001)-p(1 × 1)O, are shown and discussed. During the first stages of deposition, the ultra-thin MO layer reduces the molecule-substrate interaction enhancing the molecular diffusivity with the respect to other investigated substrates [namely, Si(111), Au(001) and oxygen-free Fe(001)]. On Fe(001)-p(1 × 1)O, ZnTPP molecules form an ordered and stable square-lattice array. The photoemission analysis of the valence bands reveals that all the characteristic features of the molecule are already visible in the 1 monolayer-thick sample spectrum. Similarly, the core level investigation suggests a weak molecule perturbation. The ZnTPP/Fe(001)-p(1 × 1)O interface represents a prototypical system to investigate the organic film adhesion on ultra-thin MO layers and the processes involved during the film growth.

Williamson alkylation approach to the synthesis of poly(alkyl vinyl ether) copolymers

International Nuclear Information System (INIS)

Markova, D.; Christova, D.; Velichkova, R.

2008-01-01

A method for synthesis of poly(alkyl vinyl ether-co-vinyl alcohol) copolymers was developed based on the Williamson's alkylation of poly(vinyl acetate) (PVAc) with alkyl iodides. The influence of the alkylating agent and the reaction conditions on the efficiency of the modification reaction was investigated. The copolymers obtained were characterized by means of 1 H NMR and GPC. It was proved that by applying the proposed method copolymers of different composition and properties containing methyl vinyl ether, ethyl vinyl ether as well as n-butyl vinyl ether units could be prepared. Poly(methyl vinyl ether-co-vinyl alcohol)s of high degree of methylation exhibit sharp temperature response at 38-39 deg C in aqueous solution typical of the so-called smart polymers. (authors)

Synthesis of 25-hydroxyvitamin D3 3β-3'-[N-(4-azido-2-nitrophenyl)amino]propyl ether, a second-generation photoaffinity analogue of 25-hydroxyvitamin D3: Photoaffinity labeling of rat serum vitamin D binding protein

International Nuclear Information System (INIS)

Ray, R.; Holick, M.F.; Bouillon, R.; Van Baelen, H.

1991-01-01

Vulnerability of 25-hydroxy-[26,27- 3 H]vitamin D 3 3β-N-(4-azido-2-nitrophenyl)glycinate, a photoaffinity analogue of 25-hydroxyvitamin D 3 (25-OH-D 3 ) toward standard conditions of carboxymethylationin promoted the authors to synthesize 25-hydroxyvitamin D 3 3β-3'-[N-(4-azido-2-nitrophenyl)amino]propyl ether (25-ANE), a hydrolytically stable photoaffinity analogue of 25-OH-D 3 , and 25-hydroxyvitamin D 3 3β-3'-[N-(4-azido-2-nitro-[3,5- 3 H]phenyl)amino]propyl ether ( 3 H-25-ANE), the radiolabeled counterpart of 25-ANE competes for the 25-OH-D 3 binding site in rat serum vitamin D binding protein (rDBP). On the other hand, UV exposure of a sample of purified rat DBP (rDBP), preincubated in the dark with 3 H-25-ANE, covalently labeled the protein. However, very little covalent labeling was observed in the absence of UV light or in the presence of a large excess of 25-OH-D 3 . These results provide strong evidence for the covalent labeling of the 25-OH-D 3 binding site in rDPB by 3 H-25-ANE

Synthesis and Characterization of Sulfonated Poly(Phenylene Containing a Non-Planar Structure and Dibenzoyl Groups

Directory of Open Access Journals (Sweden)

Hohyoun Jang

2016-02-01

Full Text Available Polymers for application as sulfonated polyphenylene membranes were prepared by nickel-catalyzed carbon-carbon coupling reaction of bis(4-chlorophenyl-1,2-diphenylethylene (BCD and 1,4-dichloro-2,5-dibenzoylbenzene (DCBP. Conjugated cis/trans isomer (BCD had a non-planar conformation containing four peripheral aromatic rings that facilitate the formation of π–π interactions. 1,4-Dichloro-2,5-dibenzoylbenzene was synthesized from the oxidation reaction of 2,5-dichloro-p-xylene, followed by Friedel-Crafts reaction with benzene. DCBP monomer had good reactivity in polymerization affecting the activity of benzophenone as an electron-withdrawing group. The polyphenylene was sulfonated using concentrated sulfuric acid. These polymers without any ether linkages on the polymer backbone were protected from nucleophilic attack by hydrogen peroxide, hydroxide anion, and radicals generated by polymer electrolyte membrane fuel cell (PEMFC operation systems. The mole fraction of the sulfonic acid groups was controlled by varying the mole ratio of bis(4-chlorophenyl-1,2-diphenylethylene in the copolymer. In comparison with Nafion 211® membrane, these SBCDCBP membranes showed ion exchange capacity (IEC ranging from 1.04 to 2.07 meq./g, water uptake from 36.5% to 69.4%, proton conductivity from 58.7 to 101.9 mS/cm, and high thermal stability.

2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47) decreases progesterone synthesis through cAMP-PKA pathway and P450scc downregulation in mouse Leydig tumor cells

International Nuclear Information System (INIS)

Han, Xiumei; Tang, Rong; Chen, Xiaojiao; Xu, Bo; Qin, Yufeng; Wu, Wei; Hu, Yanhui; Xu, Bin; Song, Ling; Xia, Yankai; Wang, Xinru

2012-01-01

Polybrominated diphenyl ethers (PBDEs) are commonly used as flame retardants in textiles, plastics and electronics and represent a group of persistent environmental contaminants. They have been found to accumulate in human and marine mammals. Previous studies have shown that PBDEs have endocrine-disrupting properties and reproductive toxicity. However, the mechanisms under the reproductive disruptions are still not well understood. In this study, we explored the effects of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) on progesterone biosynthesis and possible mechanisms in mouse Leydig tumor cells (mLTC-1). Our results showed that BDE-47 could reduce progesterone production and decrease the intracellular cAMP level induced by hCG or forskolin. These suggested that BDE-47 decreasing progesterone production in mLTC-1 cells may be associated with the decline of intracellular cAMP level. Moreover, our data also indicated that the site G protein in cAMP-PKA pathway may be involved in this process. Furthermore, the addition of cAMP analog, 8-Br-cAMP, could not reverse the decrease of progesterone biosynthesis, indicating that a post-cAMP site (or sites) might be involved into the BDE-47-decreased progesterone production. In addition, we found BDE-47 reduced the activity of P450 side chain cleavage enzyme (P450scc), which was companied with the decline of P450scc mRNA and protein level in mLTC-1 cells. Put all together, these results suggested that progesterone synthesis decrease induced by BDE-47 may be associated with attenuation of cAMP generation and reduction of P450scc activity.

A Focus on Triazolium as a Multipurpose Molecular Station for pH-Sensitive Interlocked Crown-Ether-Based Molecular Machines.

Science.gov (United States)

Coutrot, Frédéric

2015-10-01

The control of motion of one element with respect to others in an interlocked architecture allows for different co-conformational states of a molecule. This can result in variations of physical or chemical properties. The increase of knowledge in the field of molecular interactions led to the design, the synthesis, and the study of various systems of molecular machinery in a wide range of interlocked architectures. In this field, the discovery of new molecular stations for macrocycles is an attractive way to conceive original molecular machines. In the very recent past, the triazolium moiety proved to interact with crown ethers in interlocked molecules, so that it could be used as an ideal molecular station. It also served as a molecular barrier in order to lock interlaced structures or to compartmentalize interlocked molecular machines. This review describes the recently reported examples of pH-sensitive triazolium-containing molecular machines and their peculiar features.

Planck's constant and the three waves (TWs) of Einstein's covariant ether

Science.gov (United States)

Kostro, L.

1985-11-01

The implications of a three-wave model for elementary particles, satisfying the principles of both quantum mechanics and General Relativity (GR), are discussed. In GR, the ether is the fundamental source of all activity, where particles (waves) arise at singularities. Inertia and gravity are field properties of the ether. In flat regions of the space-time geodesic, wave excitations correspond to the presence of particles. A momentum-carrying excitation which occurs in the ether is a superluminal radiation (phase- or B-waves) which transports neither energy nor mass. Superposition of the B-waves produces soliton-like excitations on the ether to form C-waves, i.e., particles. The particle-waves travel through space-time on D-waves, and experience reflection, refraction and interference only where B-waves have interacted with the ether. The original particles, photons-maximons, existed at the Big Bang and had physical properties which are describable in terms of Planck's quantities.

Oil recovery with sulfomethylated poly (lower alkyl vinyl ether/maleic anhydride)

Energy Technology Data Exchange (ETDEWEB)

Norton, C.J.; Falk, D.O.

1973-05-22

Lower alkyl vinyl ether e.g., methyl vinyl ether, propyl vinyl ether, isopropyl vinyl ether, hexyl vinyl ether, is copolymerized conventionally with maleic anhydride, the resulting copolymer is treated with ammonia or ammonium hydroxide to form the partial amide-ammonium salt, and this salt is in turn treated with formaldehyde and thereafter or simultaneously with ammonium or alkali metal salt sulfite (including bisulfites, etc.) to form an at least partially sulfomethylated copolymer. Aqueous solutions of the sulfomethylated copolymer are useful in increasing the viscosity of drive fluids used in the supplemented recovery of petroleum from subterranean formations. In general, enhancing the polyionic character of mobility control agents used in supplemented recovery of petroleum provides enhanced recovery. Achieving this enhancement of polyionic character through use of sulfonate groups provides a mobility control agent with good ability to sustain viscosity in the presence of brine and lime, usually present in the connate waters of petroleum-bearing formations. (7 claims)

In vitro antioxidant activity of pet ether extract of black pepper

Science.gov (United States)

Singh, Ramnik; Singh, Narinder; Saini, B.S.; Rao, Harwinder Singh

2008-01-01

Objective: To investigate the in vitro antioxidant activity of different fractions (R1, R2 and R3) obtained from pet ether extract of black pepper fruits (Piper nigrum Linn.) Materials and Methods: The fractions R1, R2 and R3 were eluted from pet ether and ethyl acetate in the ratio of 6:4, 5:5 and 4:6, respectively. 1,1-Diphenyl-2-picryl-hydrazyl (DPPH) radical, superoxide anion radical, nitric oxide radical, and hydroxyl radical scavenging assays were carried out to evaluate the antioxidant potential of the extract. Results: The free radical scavenging activity of the different fractions of pet ether extract of P. nigrum (PEPN) increased in a concentration dependent manner. The R3 and R2 fraction of PEPN in 500 µg/ml inhibited the peroxidation of a linoleic acid emulsion by 60.48±3.33% and 58.89±2.51%, respectively. In DPPH free radical scavenging assay, the activity of R3 and R2 were found to be almost similar. The R3 (100µg/ml) fraction of PEPN inhibited 55.68±4.48% nitric oxide radicals generated from sodium nitroprusside, whereas curcumin in the same concentration inhibited 84.27±4.12%. Moreover, PEPN scavenged the superoxide radical generated by the Xanthine/Xanthine oxidase system. The fraction R2 and R3 in the doses of 1000µg/ml inhibited 61.04±5.11% and 63.56±4.17%, respectively. The hydroxyl radical was generated by Fenton's reaction. The amounts of total phenolic compounds were determined and 56.98 µg pyrocatechol phenol equivalents were detected in one mg of R3. Conclusions: P. nigrum could be considered as a potential source of natural antioxidant. PMID:20040947

3,5-Bis(4-meth-oxy-phen-yl)-1-phenyl-4,5-dihydro-1H-pyrazole.

Science.gov (United States)

Baktır, Zeliha; Akkurt, Mehmet; Samshuddin, S; Narayana, B; Yathirajan, H S

2011-01-12

In the title compound, C(23)H(22)N(2)O(2), the central pyrazole ring is nearly planar (r.m.s. deviation = 0.046 Å) and it makes a dihedral angle of 18.5 (2)° with the phenyl ring. The dihedral angles between the phenyl and the two meth-oxy-substituted phenyl rings are 26.2 (2) and 80.6 (2)°. The crystal structure is stabilized by C-H⋯π stacking inter-actions and weak π-π inter-actions [centriod-centroid distance = 3.891 (2) Å].

An improved synthesis process of calixcrown ethers and synthesis of novel calixcrown ether

International Nuclear Information System (INIS)

Wang Hairong; Zhang Ping; Wang Chunmiao; Wang Jianchen; Chen Jing

2007-01-01

The synthesis method of calixcrown ethers was simplified and improved, and 10 L- scale synthesis was carried out. In the synthesis of the intermediates of the first three steps, the synthesis of 5, 11, 17, 23-tetra-tert-butyl-25, 26, 27, 28-tetrahydroxyl-calix[4] and its dehydroxylation were considered together, the purification procedures of the former, including re-crystallization in toluene and decolorization with activated carbon, were cancelled, and thus these steps were simplified. In the synthesis of oligoethylene glycol ditosylate, the purification method was also improved and the time-consuming column chromatography was left out. In the final step, impurities were removed by repeating stirring-settlement steps, by following recrystallization, the pure product was obtained. With these measures, the whole process could be implemented easily. The industrial scale production of calixcrown ethers could be fulfilled with the improved process. In addition, a new extracant, 25, 27-bis (n-propyloxy)calix[4]-26, 28-crown-6, is prepared and identified. (authors)

Investigation of ammonium trinitratouranylate complexing with diethyl ether

International Nuclear Information System (INIS)

Khod'ko, N.N.; Kolevich, T.A.; Umrejko, D.S.

1989-01-01

Interaction of ammonium trinitratouranylate (ATNU) with diethyl ether is investigated. It is shown, that adduct of UO 2 (NO 3 ) 2 · 2(C 2 H 5 ) 2 O coposition is formed in the indicated solvent due to incongruent solubility of ANTU. Analogous compound is obtained at ether effect on uranyl anhydrous nitrate. The matter is determined and investigated by means of chemical, thermal analyses and oscillating spectroscopy

Multi-species interactions impact the accumulation of weathered 2,2-bis (p-chlorophenyl)-1,1-dichloroethylene (p,p'-DDE) from soil

International Nuclear Information System (INIS)

Kelsey, Jason W.; White, Jason C.

2005-01-01

The impact of interactions between the earthworms Eisenia foetida and Lumbricus terrestris and the plants Cucurbita pepo and Cucurbita maxima on the uptake of weathered p,p'-DDE from soil was determined. Although some combinations of earthworm and plant species caused significant changes in the p,p'-DDE burden in both organisms, the effects were species specific. Contaminant bioconcentration in C. pepo was increased slightly by E. foetida and by 3-fold when the plant was grown with L. terrestris. E. foetida had no effect on the contaminant BCF by C. maxima, but L. terrestris caused a 2-fold reduction in p,p'-DDE uptake by the plant. Contaminant levels in E. foetida and L. terrestris were unaffected by C. pepo. When grown with C. maxima, the concentration of p,p'-DDE decreased by approximately 4-fold and 7-fold in E. foetida and L. terrestris, respectively. The data suggest that the prediction of contaminant bioavailability should consider interactions among species. - Interactions between earthworms and plants affect both the phytoextraction and bioaccumulation of p,p'-DDE in soil

2,3-Dibromo-1-(4-chlorophenyl-3-(5-nitro-2-furylpropan-1-one

Directory of Open Access Journals (Sweden)

Balakrishna Kalluraya

2010-12-01

Full Text Available In the title compound, C13H8Br2ClNO4, the linking –CHBr–CHBr– fragment is disordered over two orientations with refined site occupancies of 0.512 (11 and 0.488 (11. The dihedral angle between the furan ring and the phenyl ring is 21.86 (16°. In the crystal, the molecules are linked into [011] chains by intermolecular C—H...O hydrogen bonds.

Rapid and extensive debromination of decabromodiphenyl ether by smectite clay-templated subnanoscale zero-valent iron.

Science.gov (United States)

Yu, Kai; Gu, Cheng; Boyd, Stephen A; Liu, Cun; Sun, Cheng; Teppen, Brian J; Li, Hui

2012-08-21

Subnanoscale zerovalent iron (ZVI) synthesized using smectite clay as a template was utilized to investigate reduction of decabromodiphenyl ether (DBDE). The results revealed that DBDE was rapidly debrominated by the prepared smectite-templated ZVI with a reaction rate 10 times greater than that by conventionally prepared nanoscale ZVI. This enhanced reduction is plausibly attributed to the smaller-sized smectite-templated ZVI clusters (∼0.5 nm) vs that of the conventional nanoscale ZVI (∼40 nm). The degradation of DBDE occurred in a stepwise debromination manner. Pentabromodiphenyl ethers were the terminal products in an alkaline suspension (pH 9.6) of smectite-templated ZVI, whereas di-, tri-, and tetrabromodiphenyl ethers formed at the neutral pH. The presence of tetrahydrofuran (THF) as a cosolvent at large volume fractions (e.g., >70%) in water reduced the debromination rates due to enhanced aggregation of clay particles and/or diminished adsorption of DBDE to smectite surfaces. Modification of clay surfaces with tetramethylammonium (TMA) attenuated the colsovent effect on the aggregation of clay particles, resulting in enhanced debromination rates. Smectite clay provides an ideal template to form subnanoscale ZVI, which demonstrated superior debromination reactivity with DBDE compared with other known forms of ZVIs. The ability to modify the nature of smectite clay surface by cation exchange reaction utilizing organic cations can be harnessed to create surface properties compatible with various contaminated sites.

3,5-Bis[1-acetyl-5-(4-chlorophenyl-4,5-dihydro-1H-pyrazol-3-yl]-2,6-dimethylpyridine tetrahydrofuran solvate

Directory of Open Access Journals (Sweden)

Qun Qian

2008-07-01

Full Text Available In the title compound, C29H27Cl2N5O2·C4H8O, the polycyclic system is composed of three parts: one central pyridine ring substituted by two functionalized pyrazoline rings. The dihedral angles between the central pyridine plane and pyrazoline planes are 5.11 (1 and 13.99 (1°, whereas the dihedral angles between each chlorophenyl plane and the attached pyrazoline planes are 88.65 (1 and 83.87 (1°. Molecules are linked by intermolecular C—H...O hydrogen bonds, forming a three-dimensional network.

Solvent extraction of gold(III) with 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5

International Nuclear Information System (INIS)

Hasany, S.M.; Imtiaz Hanif

1978-01-01

A simple, rapid and selective separation procedure of gold based on its extraction with 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5 has been developed. The dependence of the distribution ratio of gold on the pH of aqueous solutions, concentration of hydrochloric, nitric and perchloric acids and the organic solvents has been investigated. Decontamination factors for a number of metal ions with respect to gold are reported. Excellent separation of gold is obtained from many elements including noble metals. Citrate, cyanide, iodide, thiosulfate and thiourea completely mask gold, whereas oxalate does not interfere. Solutions of 1M HCl, 0.2M KCN, and the buffer of pH 0.8 readily strip gold from the organic phase. Some useful analytical applications of this procedure are discussed. (author)

Metal ion separations with proton-ionizable Lariat Ethers and their polymers

International Nuclear Information System (INIS)

Bartsch, R.A.

1993-01-01

The preparation of novel and specific organic complexing agents may lead to the development of new separation systems for aqueous metal ions. Thus the introduction of highly lipophilic oximes led to the current utilization of these compounds as commercial extractants for the hydrometallurgy of nonferrous metals. Crown ethers (macrocyclic polyethers) have been employed in the laboratory-scale solvent extraction of alkali-metal, alkaline-earth, and other metal cations into organic phases. Attachment of side arms to crown ethers gives lariat ethers. The presence of one or more potential coordination sites in the side arm of the lariat ether may produce substantial changes in the selectivity and efficiency of metal ion complexation. It has been demonstrated that concomitant transfer of an aqueous phase anion into the organic medium is not required for metal ion extraction. This factor is of immense importance to potential practical applications of these proton-ionizable crown ethers in which the common, hard, aqueous phase anions would be involved. Another advantage of proton-ionizable lariat ethers is the ease with which extracted metal ions may be stripped from the organic phase by shaking with aqueous mineral acid. Thus both metal ion extraction and stripping are facilitated by pendent proton-ionizable groups. Most of the hazardous metal ion species in the Hanford Site tank wastes are members of the alkali-metal, alkaline-earth, lanthanide, and actinide families. These hard metal ion species prefer association with hard donor atoms, such as oxygens. Therefore, crown and lariat ethers are well-suited for complexation with such metal ion species

Excited State Spectra and Dynamics of Phenyl-Substituted Butadienes

DEFF Research Database (Denmark)

Wallace-Williams, Stacie E.; Schwartz, Benjamin J.; Møller, Søren

1994-01-01

indicate that phenyl torsional motion is not important to the excited-state dynamics and reveal alternative excited-state reaction pathways. The results demonstrate how molecular systems that are structually similar can exhibit different electronic properties and excited-state dynamics....

Distribution of polybrominated diphenyl ethers (PBDEs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in municipal solid waste incinerators

International Nuclear Information System (INIS)

Wang, L.-C.; Hsi, H.-C.; Wang, Y.-F.; Lin, S.-L.; Guo-Ping Chang-Chien

2010-01-01

The stack flue gases and the ashes in different units of two municipal solid waste incinerators (MSWIs) are sampled to investigate the characteristics of polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Bottom ashes (BA) exhibited much higher PBDD/F (8.11-52.2 pg TEQ/g) and PBDE contents (20.4-186 ng/g) than those of fly ashes (0.0932-2.02 pg TEQ/g and 0.332-25.5 ng/g), revealing that the PBDD/Fs and PBDEs in the feeding waste may not be completely destroyed. The PBDE concentrations/contents in the stack flue gases (26.1-109 ng/Nm 3 ) and in the BA (20.4-186 ng/g) of the MSWIs could reach three orders higher than those in the atmosphere and reference soils. PBDE contributions to the environment from the stack flue gases or the reutilization of BA of MSWIs should not be ignored from the developing PBDE inventory. - Municipal solid waste incinerators contributed PBDEs and PBDD/Fs to the environment through stack flue gases and reutilization of bottom ashes.

Contribution to the study of gamma radiolysis of 2-furyl butyl or substituted phenyl ketones in isopropanol

International Nuclear Information System (INIS)

El Dessouky Aly, M.M.

1982-03-01

The following ketones: 2-furyl butyl ketone (I), 2 furyl phenyl ketone (II), 2-furyl p-methylphenyl ketone (III) and 2-furyl p-methoxyphenyl ketone (IV) were synthesised and characterised. The yields of hydrogen and methane obtained during radiolysis of the mixtures ketones (I to IV)-2-propanol were determined. These yields are always lower than with pure 2-propanol. Radiolysis products for ketones (I) and (II) are studied. Analysis of radiolitical products were conducted by gas chromatography. Effect of radiation dose and ketone concentration is determined. Reaction mechanisms are studied [fr

Noval 1-substituted-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazole derivatives: Synthesis and pharmacological activity

Directory of Open Access Journals (Sweden)

Sabir Hussain

2015-05-01

Full Text Available Several-1-carbothioamide-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 2a–d, 1-(pyridine-4-ylcarbonyl-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 3a–d, 1-(5-chloro-6-fluoro-1,3-benzothiazole-2-ylthiocarbamoyl-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 4a–d and 1-[(1,2,4-triazole-4-yl carbothioamide]-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 5a–d were synthesized. The structures of the newly synthesized compounds were supported by IR, 1H NMR and mass spectral data. These compounds were investigated for their, anti-inflammatory, analgesic, ulcerogenic, lipid peroxidation, antibacterial and antifungal activities. Some of the synthesized compounds showed potent anti-inflammatory activity along with minimal ulcerogenic effect and lipid peroxidation, compared to ibuprofen and flurbiprofen. Some of the tested compounds also showed moderate antimicrobial activity against tested bacterial and fungal strains.

Crystal structure of bis-[(acetato-κO)(imidazolidine-2-thione-κS)bis-(tri-phenyl-phosphane-κP)silver(I)] di-μ-imidazol-idine-2-thione-κ(4) S:S-bis-[(imidazol-id-ine-2-thione-κS)bis-(tri-phenyl-phosphane-κP)silver(I)] di-acetate aceto-nitrile disolvate tetra-hydrate.

Science.gov (United States)

Nimthong-Roldán, Arunpatcha; Ratthiwan, Janejira; Lakmas, Sawanya; Wattanakanjana, Yupa

2016-04-01

In the title compound, [Ag2(C3H6N2S)4(C18H15P)2](C2H3O2)2·[Ag(C2H3O2)(C3H6N2S)(C18H15P)2]2·2C2H3N·4H2O, the Ag(I) ion in the mononuclear neutral complex exhibits a distorted tetra-hedral environment with coordination by two P atoms from tri-phenyl-phosphane (PPh3) ligands, one S atom of an imidazolidine-2-thione (etu) ligand and one O atom of an acetate anion. The binuclear cationic complex comprises two inversion-related [Ag(C3H6N2S)2(C18H15P)] units with Ag(I) ions bridged by two S atoms from etu ligands forming a four-membered Ag-S-Ag-S ring. Each Ag(I) ion is coordinated by a P atom of a PPh3 ligand, two S atoms of bridging etu ligands and the terminal S atom of an etu ligand in a distorted tetra-hedral environment. In the crystal, the mononuclear complex is linked to lattice water mol-ecules through O-H⋯O and N-H⋯O hydrogen bonds, forming a chain along [100]. In addition, the binuclear complex mol-ecules are connected to acetate anions and lattice water mol-ecules via O-H⋯O, N-H⋯O and O-H⋯S hydrogen bonds, also along [100].

Enhanced response of microbial fuel cell using sulfonated poly ether ether ketone membrane as a biochemical oxygen demand sensor

Energy Technology Data Exchange (ETDEWEB)

Ayyaru, Sivasankaran; Dharmalingam, Sangeetha, E-mail: sangeetha@annauniv.edu

2014-03-01

Graphical abstract: - Highlights: • Sulfonated poly ether ether ketone (SPEEK) membrane in SCMFC used to determine the BOD. • The biosensor produces a good linear relationship with the BOD concentration up to 650 ppm. • This sensing range was 62.5% higher than that of Nafion{sup ®}. • SPEEK exhibited one order lesser oxygen permeability than Nafion{sup ®}. • Nafion{sup ®} shows high anodic internal resistance (67 Ω) than the SPEEK (39 Ω). - Abstract: The present study is focused on the development of single chamber microbial fuel cell (SCMFC) using sulfonated poly ether ether ketone (SPEEK) membrane to determine the biochemical oxygen demand (BOD) matter present in artificial wastewater (AW). The biosensor produces a good linear relationship with the BOD concentration up to 650 ppm when using artificial wastewater. This sensing range was 62.5% higher than that of Nafion{sup ®}. The most serious problem in using MFC as a BOD sensor is the oxygen diffusion into the anode compartment, which consumes electrons in the anode compartment, thereby reducing the coulomb yield and reducing the electrical signal from the MFC. SPEEK exhibited one order lesser oxygen permeability than Nafion{sup ®}, resulting in low internal resistance and substrate loss, thus improving the sensing range of BOD. The system was further improved by making a double membrane electrode assembly (MEA) with an increased electrode surface area which provide high surface area for electrically active bacteria.

Quantitative nuclear magnetic resonance spectrometry II. Purity of phosphorus-based agrochemicals glyphosate (N-(phosphonomethyl)-glycine) and profenofos (O-(4-bromo-2-chlorophenyl) O-ethyl S-propyl phosphorothioate) measured by {sup 1}H and {sup 31}P QNMR spectrometry

Energy Technology Data Exchange (ETDEWEB)

Saed Al Deen, Tareq; Brynn Hibbert, D.; Hook, James M.; Wells, Robert J

2002-12-09

The purities of the widely-used herbicide glyphosate (N-(phosphonomethyl)glycine), and the insecticide profenofos (O-(4-bromo-2-chlorophenyl) O-ethyl S-propyl phosphorothioate) were determined by {sup 1}H and {sup 31}P quantitative nuclear magnetic resonance (QNMR) spectrometry using an internal standard. QNMR does not need a standard reference of the same target analyte, in contrast to chromatographic methods, but only a compound containing the nucleus of interest. Sodium acetate and sodium phosphate of known purity were chosen as internal standards for {sup 1}H NMR and {sup 31}P NMR), respectively for the water soluble glyphosate and a single internal standard, trimethyl phosphate for both {sup 1}H and {sup 31}P NMR quantitative analysis of the organic soluble profenofos. These standards have NMR peaks that do not interfere with those of the analyte, they are chemically inert and are soluble in the deuterated solvent. The average purity of glyphosate obtained by {sup 1}H NMR (97.07%, {sigma}=0.68) agreed with that by {sup 31}P NMR (96.53%, {sigma}=0.90; ANOVA, P=0.074) for the five batches provided by the manufacturer according to the procedures for chemical registration in Australia. The standard deviations of seven independent analyses of a single batch by {sup 1}H NMR and {sup 31}P NMR were {sigma}=0.24% and {sigma}=0.33%, respectively, values which confirm the exceptional precision of the method. The purity of profenofos by {sup 1}H NMR (94.63%, {sigma}=0.14) also agreed with that by {sup 31}P NMR (94.62%, {sigma}=0.59; ANOVA, P=0.97). Uncertainty budgets for the measured purities of glyphosate and profenofos show that the uncertainty in the purity of the internal standard is a major contributor to the uncertainty of the result. NMR was also used to establish the impurity profile of both compounds, and quantify the impurities present.

Poly (ether ether ketone) derivatives: Synthetic route and characterization of nitrated and sulfonated polymers

International Nuclear Information System (INIS)

Conceicao, T.F.; Bertolino, J.R.; Barra, G.M.O.; Pires, A.T.N.

2009-01-01

Nitrated and sulfonated poly (ether ether ketone) [SNPEEK] samples were prepared through sulfonation of nitrated PEEK (NPEEK) at different temperatures resulting in polymers with distinct sulfonation degrees (SD). The sulfonation occurred preferentially in the hydroquinone segment even after 81% of this moiety had been nitrated. Sulfonation in the benzophenone moiety was achieved only in 16% of this segment at the reaction temperature of 80 deg. C. The substitution degree was obtained through the TG curves, and values were in agreement with 1 H NMR data when SD is much higher as ND (nitration degree). The highest SD obtained was 72%. Membranes of the sulfonated and nitrated PEEK (SNPEEK) were prepared by casting and showed good ductility depending on the substitution degree, with proton conductivity in the order of 10 -2 S cm -1 , an important characteristic in some applications, such as in fuel cells

Poly (ether ether ketone) derivatives: Synthetic route and characterization of nitrated and sulfonated polymers

Energy Technology Data Exchange (ETDEWEB)

Conceicao, T.F.; Bertolino, J.R. [Grupo de Estudo em Materiais Polimericos-Departamento de Quimica, Universidade Federal de Santa Catarina, Florianopolis, SC (Brazil); Barra, G.M.O. [Departamento de Engenharia Mecanica, Universidade Federal de Santa Catarina, Florianopolis, SC (Brazil); Pires, A.T.N. [Grupo de Estudo em Materiais Polimericos-Departamento de Quimica, Universidade Federal de Santa Catarina, Florianopolis, SC (Brazil)], E-mail: alfredotiburcio@pq.cnpq.br

2009-03-01

Nitrated and sulfonated poly (ether ether ketone) [SNPEEK] samples were prepared through sulfonation of nitrated PEEK (NPEEK) at different temperatures resulting in polymers with distinct sulfonation degrees (SD). The sulfonation occurred preferentially in the hydroquinone segment even after 81% of this moiety had been nitrated. Sulfonation in the benzophenone moiety was achieved only in 16% of this segment at the reaction temperature of 80 deg. C. The substitution degree was obtained through the TG curves, and values were in agreement with {sup 1}H NMR data when SD is much higher as ND (nitration degree). The highest SD obtained was 72%. Membranes of the sulfonated and nitrated PEEK (SNPEEK) were prepared by casting and showed good ductility depending on the substitution degree, with proton conductivity in the order of 10{sup -2} S cm{sup -1}, an important characteristic in some applications, such as in fuel cells.

Near Infrared Spectroscopic Identification of Alkyl Aromatic Esters and Phenyl Ketones

Science.gov (United States)

Nelyubov, D. V.; Vazhenin, D. A.; Kudriavtsev, A. A.; Buzolina, A. Yu.

2018-03-01

Bands characterizing the content of carbon atoms in alkyl (7177-7205 cm-1) and phenyl structural fragments (9175-9192 cm-1) in organic molecules were revealed by studying the near infrared spectra of such compounds. The optical density at the maxima of these absorption bands was shown to depend strongly on the fraction of carbon atoms in the corresponding fragments. The developed models proved to be adequate for determining the fraction of carbon atoms in alkyl aromatic esters and phenyl ketones. The feasibility of modeling the molecular structure of alkyl aromatic esters using regression models was demonstrated for the product of the condensation of oleic acid and benzyl alcohol.

Interpolymer complexses of vinyl ether copolymer with polyacrylic and polymethacrylic acids

Directory of Open Access Journals (Sweden)

E. Shaikhutdinov

2012-03-01

Full Text Available The interactions between macromolecules of copolymers based on vinyl ethers (vinyl ether of monoethanolamine and vinyl buthyl ether and 2-acryloilamido-2-methylpropanesulphonic acid with polyacrylic and polymethacrylic acid and, as well as study the effect of interpolymer interactions in the adsorption of polymers at the aqueous solution-air interface were investigated. The observed synergistic increase in surface activity of macromolecules into polyelectrolyte mixtures explained by the formation of interpolymer complexes polyacid - copolymer.

Absorption of decabromodiphenyl ether and other organohalogen chemicals by grey seals (Halichoerus grypus)

International Nuclear Information System (INIS)

Thomas, Gareth O.; Moss, Simon E.W.; Asplund, Lillemor; Hall, Ailsa J.

2005-01-01

An input-output balance study was performed for polybrominated diphenyl ethers, polychlorinated biphenyls and some organochlorine pesticides on three captive, juvenile grey seals (Halichoerus grypus). The animals were fed a diet of herring for six months, during the last three months of which this study was performed. A supplement of decabromodiphenyl ether was included in the diet during the second month of the study. Consistently high absorption (>89%) was observed for all of the chemicals studied, whereas work on other animals has generally shown high (>80%) net absorption at log K OW OW , and very low absorption of decabromodiphenyl ether. The half-life of decabromodiphenyl ether in blood was estimated to be between 8.5 and 13 days. Measurable concentrations of decabromodiphenyl ether were detected in seal blubber at the end of the study, indicating that this chemical can be stored in adipose and may bioaccumulate. Current understanding of the mechanism of absorption of organohalogen chemicals and the potential for accumulation of decabromodiphenyl ether will need reassessing in the light of these results. - Decabromodiphenyl ether is absorbed effectively from the diet by grey seals, and can be stored in the blubber even after exposure ceases

Quantitative Structure-Activity Relationship of Insecticidal Activity of Benzyl Ether Diamidine Derivatives

Science.gov (United States)

Zhai, Mengting; Chen, Yan; Li, Jing; Zhou, Jun

2017-12-01

The molecular electrongativity distance vector (MEDV-13) was used to describe the molecular structure of benzyl ether diamidine derivatives in this paper, Based on MEDV-13, The three-parameter (M 3, M 15, M 47) QSAR model of insecticidal activity (pIC 50) for 60 benzyl ether diamidine derivatives was constructed by leaps-and-bounds regression (LBR) . The traditional correlation coefficient (R) and the cross-validation correlation coefficient (R CV ) were 0.975 and 0.971, respectively. The robustness of the regression model was validated by Jackknife method, the correlation coefficient R were between 0.971 and 0.983. Meanwhile, the independent variables in the model were tested to be no autocorrelation. The regression results indicate that the model has good robust and predictive capabilities. The research would provide theoretical guidance for the development of new generation of anti African trypanosomiasis drugs with efficiency and low toxicity.

Discovery of a potent and orally available acyl-CoA: cholesterol acyltransferase inhibitor as an anti-atherosclerotic agent: (4-phenylcoumarin)acetanilide derivatives.

Science.gov (United States)

Ogino, Masaki; Fukui, Seiji; Nakada, Yoshihisa; Tokunoh, Ryosuke; Itokawa, Shigekazu; Kakoi, Yuichi; Nishimura, Satoshi; Sanada, Tsukasa; Fuse, Hiromitsu; Kubo, Kazuki; Wada, Takeo; Marui, Shogo

2011-01-01

Acyl-CoA: cholesterol acyltransferase (ACAT) is an intracellular enzyme that catalyzes cholesterol esterification. ACAT inhibitors are expected to be potent therapeutic agents for the treatment of atherosclerosis. A series of potent ACAT inhibitors based on an (4-phenylcoumarin)acetanilide scaffold was identified. Evaluation of the structure-activity relationships of a substituent on this scaffold, with an emphasis on improving the pharmacokinetic profile led to the discovery of 2-[7-chloro-4-(3-chlorophenyl)-6-methyl-2-oxo-2H-chromen-3-yl]-N-[4-chloro-2-(trifluoromethyl)phenyl]acetamide (23), which exhibited potent ACAT inhibitory activity (IC50=12 nM) and good pharmacokinetic profile in mice. Compound 23 also showed regressive effects on atherosclerotic plaques in apolipoprotein (apo)E knock out (KO) mice at a dose of 0.3 mg/kg per os (p.o.).

Synthesis and investigation of the physicochemical properties of 2-(5-((theophylline-7'-ylmethyl-4-phenyl-4H-1,2,4-triazole-3-ylthio-acetic acid salts

Directory of Open Access Journals (Sweden)

A. S. Gotsulya

2014-02-01

,01 mol of sodium hydroxide and 50 ml of water heated up to boiling during 2 hours, cooled and added to the filtrate 2 ml of concentrated hydrochloric acid. Output - 84%. Tm. > 270 º C. 2-((5-((theophylline-7'-ylmethyle-4-phenyle-4Н-1,2,4-triazole-3-ilthioacetate acid. In a round, heat-resistant flack heated 0,01 mol of 7-((5-mercapto-4-phenyl-4H-1 ,2,4-triazoles-3-yl methyltheophylline, 0,02 mol NaOH and 0,01 mol monochloracetate acid. Heated up to boiling for 1 h. Cooled. Neutralized by acetic acid. Output - 71%. Tm. = 227-230 º C. Salts of 2-(5-((theophylline-7'-ilmethyle-4-phenyle-4Н-1,2,4-triazole-3-il-tiоacetate acid. A compound: 0.01 mole of acetic acid, 35 ml of ethanol and 0.01 mol of corresponding base (monoethanolammonium, dyethylammonium, dyetanolammonium, monoetanolammonium, threebutylammonium, morpholine, piperidine, piperazine heated for 1 hour in a water bath, the solvent is evaporated. Getting white crystalline substances soluble in water, soluble in diethyl ether and chloroform. For analysis compounds recrystallized from ethanol. Potassium, sodium salts of 2-(5-((theophylline-7'-ilmethyle-4-phenyle -4Н-1,2,4-triazole -3-iltioacetate acid. A compound - 0.01 mole of acetic acid and 0.01 mole of potassium or sodium hydroxide in 30 ml of water evaporated in a water bath. The dry residuum crystallized from ethanol. Getting white crystalline substances, difficulty soluble in organic solvents. For analysis compounds recrystallized from water. Magnesium , calcium, zinc , copper (II and iron (II salts of 2-(5-((teophylline-7'-ylmethyle-4-phenyle-4Н-1,2,4-triazole-3-iltioacetate acid. A compound of 0.02 mole acetic acid, 25 ml of water and accordingly 0.01 mol of magnesium oxide , calcium carbonate , zinc sulfate, copper ( II sulfate or iron ( II chloride is heated till the dissolution of precipitate , filtered , the filtrate evaporated. Received white, light blue , brown crystals with sharp melting points, little soluble in water, hardly soluble in organic

Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

Science.gov (United States)

Smith, L.A. Jr.; Jones, E.M. Jr.; Hearn, D.

1984-05-08

Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150 to 250 F at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C[sub 3] to C[sub 6] and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom. 2 figs.

Screen-printed carbon-containing electrode modified with formazan for determining copper, lead, cadmium, and zinc

International Nuclear Information System (INIS)

Stozhko, N.Yu.; Aleshina, L.V.; Brajnina, Kh.Z.; Lipunova, G.N.; Maslakova, T.I.

2004-01-01

The electrochemical behavior of some hetarylated formazans introduced into the bulk of carbon-containing inks of screen-printed electrodes was studied. The compositions of complexes formed at the electrode surface were found, and their stability constants were estimated. It was shown that the modification of carbon-containing screen-printed electrode with 1-(o-chlorophenyl-3-phenyl-5-(6-methyl-4-oxo-pyrimidinyl-2)formazan improves its sensitivity, lowers detection limits for Pb(II), Cu(II), Cd(II), and Zn(II), and ensures high precision of the results of voltammetric analysis [ru

Nikola Tesla, the Ether and his Telautomaton

Science.gov (United States)

Milar, Kendall

2014-03-01

In the nineteenth century physicists' understanding of the ether changed dramatically. New developments in thermodynamics, energy physics, and electricity and magnetism dictated new properties of the ether. These have traditionally been examined from the perspective of the scientists re-conceptualizing the ether. However Nikola Tesla, a prolific inventor and writer, presents a different picture of nineteenth century physics. Alongside the displays that showcased his inventions he presented alternative interpretations of physical, physiological and even psychical research. This is particularly evident in his telautomaton, a radio remote controlled boat. This invention and Tesla's descriptions of it showcase some of his novel interpretations of physical theories. He offered a perspective on nineteenth century physics that focused on practical application instead of experiment. Sometimes the understanding of physical theories that Tesla reached was counterproductive to his own inventive work; other times he offered new insights. Tesla's utilitarian interpretation of physical theories suggests a more scientifically curious and invested inventor than previously described and a connection between the scientific and inventive communities.

Electro-Organic Synthesis Of 2-Amino-9(4-Chlorophenyl)-5,7,8,9- Tetra Hydro-6H Benzo [7] Annulen-6-One in Acidic Medium

OpenAIRE

HEMLATA SHARMA; K.K JHANKAL; D.K. SHARMA

2011-01-01

The electro reduction of 5-(2-chlorophenyl)-1, 3- dihydro-7-2H-1, 4-benzodiazepin-2-one (clonazepam) has been studied by cyclic voltammetry at glassy carbon electrodes under the acidic conditions which indicate the reducible behavior of the drug. Electro-reduction of clonazepam has also been studied by the Galvanstatic technique at copper and amalgamated forms of copper and lead electrodes under acidic conditions. The reduction product was isolated and characterized by TLC, usual laboratory q...

Fragrance material review on 4-phenyl-3-buten-2-ol.

Science.gov (United States)

Scognamiglio, J; Letizia, C S; Api, A M

2012-09-01

A toxicologic and dermatologic review of 4-phenyl-3-buten-2-ol when used as a fragrance ingredient is presented. 4-Phenyl-3-buten-2-ol is a member of the fragrance structural group Aryl Alkyl Alcohols and is a secondary alcohol. The AAAs are a structurally diverse class of fragrance ingredients that includes primary, secondary, and tertiary alkyl alcohols covalently bonded to an aryl (Ar) group, which may be either a substituted or unsubstituted benzene ring. The common structural element for the AAA fragrance ingredients is an alcohol group -C-(R1)(R2)OH and generically the AAA fragrances can be represented as an Ar-C-(R1)(R2)OH or Ar-Alkyl-C-(R1)(R2)OH group. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 4-phenyl-3-buten-2-ol were evaluated then summarized and includes physical properties, and genotoxicity data. A safety assessment of the entire Aryl Alkyl Alcohols will be published simultaneously with this document; please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all Aryl Alkyl Alcohols in fragrances. Copyright © 2011 Elsevier Ltd. All rights reserved.

The preparation and intramolecular radical cyclisation reactions of chiral oxyme ethers

International Nuclear Information System (INIS)

Booth, Susan E.; Jenkins, Paul R.

1998-01-01

Chiral oxime ether 2 and Oxime ester 4 have been prepared by alkylation and esterification of the oxime 1. Racemic hydroxylamine 6 and chiral hydroxylamine 10 have been synthesised from N-hydroxysuccinimide and the corresponding alcohol in the presence of diethyl azo dicarboxylate, the two product were converted into the oxime ethers 7 and 11 respectively. The intramolecular radical cyclisation reactions of these oxime ethers and esters has been studied, successful reaction was observed to produce alkyl hydroxylamines 3,8 and 12. (author)

The Preparation and Intramolecular Radical Cyclisation Reactions of Chiral Oxime Ethers

Directory of Open Access Journals (Sweden)

Booth Susan E.

1998-01-01

Full Text Available Chiral oxime ether 2 and Oxime ester 4 have been prepared by alkylation and esterification of the oxime 1. Racemic hydroxylamine 6 and chiral hydroxylamine 10 have been synthesised from N-hydroxysuccinimide and the corresponding alcohol in the presence of diethylazodicarboxylate, the two products were converted into the oxime ethers 7 and 11 respectively. The intramolecular radical cyclisation reactions of these oxime ethers and esters has been studied, successful reaction was observed to produce alkyl hydroxylamines 3, 8 and 12.

A theoretical study of the relaxation of a phenyl group chemisorbed to an RDX freestanding thin film

Energy Technology Data Exchange (ETDEWEB)

Pereverzev, Andrey, E-mail: pereverzeva@missouri.edu; Sewell, Thomas D., E-mail: sewellt@missouri.edu [Department of Chemistry, University of Missouri-Columbia, Columbia, Missouri 65211-7600 (United States)

2016-08-07

Energy relaxation from an excited phenyl group chemisorbed to the surface of a crystalline thin film of α-1,3,5-trinitro-1,3,5-triazacyclohexane (α-RDX) at 298 K and 1 atm is simulated using molecular dynamics. Two schemes are used to excite the phenyl group. In the first scheme, the excitation energy is added instantaneously as kinetic energy by rescaling momenta of the 11 atoms in the phenyl group. In the second scheme, the phenyl group is equilibrated at a higher temperature in the presence of static RDX geometries representative of the 298 K thin film. An analytical model based on ballistic phonon transport that requires only the harmonic part of the total Hamiltonian and includes no adjustable parameters is shown to predict, essentially quantitatively, the short-time dynamics of the kinetic energy relaxation (∼200 fs). The dynamics of the phenyl group for times longer than about 6 ps follows exponential decay and agrees qualitatively with the dynamics described by a master equation. Long-time heat propagation within the bulk of the crystal film is consistent with the heat equation.

Enzymatic network for production of ether amines from alcohols

DEFF Research Database (Denmark)

Palacio, Cyntia M.; Crismaru, Ciprian G.; Bartsch, Sebastian

2016-01-01

We constructed an enzymatic network composed of three different enzymes for the synthesis of valuable ether amines. The enzymatic reactions are interconnected to catalyze the oxidation and subsequent transamination of the substrate and to provide cofactor recycling. This allows production...... of the desired ether amines from the corresponding ether alcohols with inorganic ammonium as the only additional substrate. To examine conversion, individual and overall reaction equilibria were established. Using these data, it was found that the experimentally observed conversions of up to 60% observed...... for reactions containing 10mM alcohol and up to 280mM ammonia corresponded well to predicted conversions. The results indicate that efficient amination can be driven by high concentrations of ammonia and may require improving enzyme robustness for scale-up....

Basic randomness of nature and ether-drift experiments

International Nuclear Information System (INIS)

Consoli, M.; Pluchino, A.; Rapisarda, A.

2011-01-01

Highlights: ► We re-consider the idea of a basic randomness of nature. ► We adopt Stochastic Electro Dynamics as a heuristic model. ► We represent the vacuum as a form of turbulent ether. ► This picture can be tested with forthcoming ether-drift experiments. - Abstract: We re-consider the idea that quantum fluctuations might reflect the existence of an ‘objective randomness’, i.e. a basic property of the vacuum state which is independent of any experimental accuracy of the observations or limited knowledge of initial conditions. Besides being responsible for the observed quantum behavior, this might introduce a weak, residual form of ‘noise’ which is intrinsic to natural phenomena and could be important for the emergence of complexity at higher physical levels. By adopting Stochastic Electro Dynamics as a heuristic model, we are driven to a picture of the vacuum as a form of highly turbulent ether, which is deep-rooted into the basic foundational aspects of both quantum physics and relativity, and to search for experimental tests of this scenario. An analysis of the most precise ether-drift experiments, operating both at room temperature and in the cryogenic regime, shows that, at present, there is some ambiguity in the interpretation of the data. In fact the average amplitude of the signal has precisely the magnitude expected, in a ‘Lorentzian’ form of relativity, from an underlying stochastic ether and, as such, might not be a spurious instrumental effect. This puzzle, however, should be solved in a next future with the use of new cryogenically cooled optical resonators whose stability should improve by about two orders of magnitude. In these new experimental conditions, the persistence of the present amplitude would represent a clean evidence for the type of random vacuum we are envisaging.

Synthesis, biological evaluation and molecular docking of N-phenyl thiosemicarbazones as urease inhibitors.

Science.gov (United States)

Hameed, Abdul; Khan, Khalid Mohammed; Zehra, Syeda Tazeen; Ahmed, Ramasa; Shafiq, Zahid; Bakht, Syeda Mahwish; Yaqub, Muhammad; Hussain, Mazhar; de la Vega de León, Antonio; Furtmann, Norbert; Bajorath, Jürgen; Shad, Hazoor Ahmad; Tahir, Muhammad Nawaz; Iqbal, Jamshed

2015-08-01

Urease is an important enzyme which breaks urea into ammonia and carbon dioxide during metabolic processes. However, an elevated activity of urease causes various complications of clinical importance. The inhibition of urease activity with small molecules as inhibitors is an effective strategy for therapeutic intervention. Herein, we have synthesized a series of 19 benzofurane linked N-phenyl semithiocarbazones (3a-3s). All the compounds were screened for enzyme inhibitor activity against Jack bean urease. The synthesized N-phenyl thiosemicarbazones had varying activity levels with IC50 values between 0.077 ± 0.001 and 24.04 ± 0.14 μM compared to standard inhibitor, thiourea (IC50 = 21 ± 0.11 μM). The activities of these compounds may be due to their close resemblance of thiourea. A docking study with Jack bean urease (PDB ID: 4H9M) revealed possible binding modes of N-phenyl thiosemicarbazones. Copyright © 2015 Elsevier Inc. All rights reserved.

Enhanced osteogenic activity of poly ether ether ketone using calcium plasma immersion ion implantation.

Science.gov (United States)

Lu, Tao; Qian, Shi; Meng, Fanhao; Ning, Congqin; Liu, Xuanyong

2016-06-01

As a promising implantable material, poly ether ether ketone (PEEK) possesses similar elastic modulus to that of cortical bones yet suffers from bio-inertness and poor osteogenic properties, which limits its application as orthopedic implants. In this work, calcium is introduced onto PEEK surface using calcium plasma immersion ion implantation (Ca-PIII). The results obtained from scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirm the modified layer with varying contents of calcium are formed on PEEK surfaces. Water contact angle measurements reveal the increasing hydrophobicity of both Ca-PIII treated surfaces. In vitro cell adhesion, viability assay, alkaline phosphatase activity and collagen secretion analyses disclose improved the adhesion, proliferation, and osteo-differentiation of rat bone mesenchymal stem cells (bMSCs) on Ca-PIII treated surfaces. The obtained results indicate that PEEK surface with enhanced osteogenic activity can be produced by calcium incorporation. Copyright © 2016 Elsevier B.V. All rights reserved.

Hyper capacity of MCM-41 supramoleculer structure in the radio- frequency range

OpenAIRE

I.I. Grygorchak; S.A. Vojtovych; Z.A. Stotsko; B.A. Seredyuk; N.K. Tovstyuk

2011-01-01

Purpose: of this paper was: 1) to synthesize supramolecular МСМ-41 structure (p-cyanogen phenyl ether of n-heptyl benzoic acid - 40%)>> with inserted guested nematic and 2) to study its dielectric properties.Design/methodology/approach: Supramolecular МСМ-41 structure has been synthesized by vacuum encapsulated method at room temperature. Dielectric properties have been studied by impedance spectroscopy method in the frequency range 10-3-106 Hz by “AUTOLAB” complex of “ECO CHEMIE” (Holland),...

An efficient synthesis of S-γ-[(4-trifluoromethyl)phenoxy] benzenepropanamine-[1-14C]maleate, an important metabolite of fluoxetine hydrochloride

International Nuclear Information System (INIS)

Wheeler, W.J.

1992-01-01

S-γ-[(4-Trifluoromethyl)phenoxy]benzenepropanamine-[1- 14 C] maleate has been prepared in six steps from R-(-)1-phenyl-1,2-ethanediol. The isotope was incorporated by the reaction of NaCN-[ 14 C] with the tert. butyldimethylsilyl ether of R-(-)1-phenyl-1,2-ethane-diol 2-tosylate. Borane reduction and arylation, followed by salt formation yielded S-γ-[(4-trifluoromethyl)phenoxy]benzenepropanamine-[1- 14 C] maleate. (Author)

Gold-catalyzed alkylation of silyl enol ethers with ortho-alkynylbenzoic acid esters

Directory of Open Access Journals (Sweden)

Yoshinori Yamamoto

2011-05-01

Full Text Available Unprecedented alkylation of silyl enol ethers has been developed by the use of ortho-alkynylbenzoic acid alkyl esters as alkylating agents in the presence of a gold catalyst. The reaction probably proceeds through the gold-induced in situ construction of leaving groups and subsequent nucleophilic attack on the silyl enol ethers. The generated leaving compound abstracts a proton to regenerate the silyl enol ether structure.

Comparative evaluation of labelling patterns and turnover of lipids, tagged by 15 (p-123I-phenyl-)pentadecanoic and 1-14C-palmitic acid

International Nuclear Information System (INIS)

Reske, S.N.; Sauer, W.; Reichmann, K.; Winkler, C.; Machulla, H.J.; Knust, E.J.

1984-01-01

Uptake and turnover of chloroform/methanol extractable tissue lipids labelled in vivo simultaneously with 15(p- 123 I-phenyl-)pentadecanoic and 1- 14 C-palmitic acid were compared. Lipid turnover studies were performed in fasted pentobarbital-anaesthetized Wistar rats in tissues with highly varying free fatty acid turnover rates. In all tissues investigated, i.e. heart, lung, liver, spleen and kidney, both tracers labelled nearly identical lipid fractions. The main tracer uptake was found in free fatty acids, phospholipids, diglycerides and triglycerides. A highly significant correlation of uptake and turnover in main tissue lipid fractions indicated an essentially identical metabolic pathway of both tracers in intermediary tissue lipid metabolism. Concordant tracer uptake and turnover patterns in tissue of lipids with highly varying fatty acid metabolic rates suggested that intrinsic metabolic activity of the tissue and respective lipid fraction was the major determinant of metabolic handling of both iodophenyl fatty- and palmitic acid. Thus, the feasibility of iodophenylpentadecanoic acid as free fatty acid tracer for studying tissue lipid metabolism is demonstrated. (author)

Synthesis, characterization, antimicrobial and cytotoxic evaluation of a bidentate schiff base ligand: (5-chloro-2-((4-nitrobenzylidene)amino)phenyl)(phenyl)methanone and its transition metal complexes

International Nuclear Information System (INIS)

Anis, I.; Noreen, Z.

2013-01-01

A Schiff base ligand (SBL): ((5-chloro-2-)(4-nitrobenzylidene) amino) phenyl)(phenyl) methanone,, was synthesized from the reaction of 4-nitrobenzaldehyde and 2-amino-5-chlorobeznzophenone followed by complexation with transition metal (II) ions (1-5). Their structures were elucidated on the basis of infrared, 1H-NMR, FAB-MS spectral, elemental analyses and molar conductance data. The octahedral geometry for complexes (1-4) and square planar geometry for complex (5) was proposed on the basis of electronic and magnetic moment data. The non-electrolytic nature of the complexes (1-5) was suggested from the conductivity data. The complexes (1-5) showed higher in vitro antimicrobial activity and in vivo lethality to shrimp larvae than the parent Schiff base ligand. (author)

Separation of thorium from lanthanides by solvent extraction with ionizable crown ethers.

Science.gov (United States)

Du, H S; Wood, D J; Elshani, S; Wai, C M

1993-02-01

Thorium and the lanthanides are extracted by alpha-(sym-dibenzo-16-crown-5-oxy)acetic acid and its analogues in different pH ranges. At pH 4.5, Th is quantitatively extracted by the crown ether carboxylic acids into chloroform whereas the extraction of the lanthanides is negligible. Separation of Th from the lanthanides can be achieved by solvent extraction under this condition. The extraction does not require specific counteranions and is reversible with respect to pH. Trace amounts of Th in water can be quantitatively recovered using this extraction system for neutron activation analysis. The nature of the extracted Th complex and the mechanism of extraction are discussed.

Red Emitting Phenyl-Polysiloxane Based Scintillators for Neutron Detection

International Nuclear Information System (INIS)

Dalla Palma, Matteo; Quaranta, Alberto; Marchi, Tommaso; Gramegna, Fabiana; Cinausero, Marco; Carturan, Sara; Collazuol, Gianmaria

2013-06-01

In this work, the performances of new red emitting phenyl- substituted polysiloxane based scintillators are described. Three dyes were dispersed in a phenyl-polysiloxane matrix in order to shift the scintillation wavelength towards the red part of the visible spectrum. PPO, Lumogen Violet (BASF) and Lumogen Red (BASF) were mixed to the starting resins with different wt. % and the analysis of the different samples was performed by means of fluorescence measurements. The scintillation yield to alpha particles at the different dye ratios was monitored by detecting either the full spectrum or the red part of the emitted light. Finally, thin red scintillators with selected compositions were coupled to Avalanche Photodiode sensors, which are usually characterized by higher efficiency in the red part of the spectrum. An increased light output of about 17% has been obtained comparing the red scintillators to standard blue emitting systems. Preliminary results on the detection of fast neutrons with the APD-red scintillator system are also presented. (authors)

Structuring of poly ether ether ketone by ArF excimer laser radiation in different atmospheres

International Nuclear Information System (INIS)

Feng, Y.; Gottmann, J.; Kreutz, E.W.

2003-01-01

Structuring of poly ether ether ketone (PEEK) by 193 nm ArF excimer laser radiation has been investigated. Experiments were carried out in different atmospheres (air, vacuum, Ar, O 2 ) in order to study its influence on the quality of the structures and the formation of the debris. Repetition rate makes little effect on the ablation rate and roughness of the structure in presence of any kind of atmosphere, indicating for the structuring of PEEK by ArF laser radiation a large window of processing. The roughness at the bottom of the structures and the morphology of the side walls are strongly affected by the properties of the atmosphere. The smallest roughness is achieved at 0.6 J/cm 2 for all kinds of processing gases. Debris around the structures can be diminished by structuring in vacuum. Plasma expansion speed has been measured by using high speed photography

The influence of water mixtures on the dermal absorption of glycol ethers

International Nuclear Information System (INIS)

Traynor, Matthew J.; Wilkinson, Simon C.; Williams, Faith M.

2007-01-01

Glycol ethers are solvents widely used alone and as mixtures in industrial and household products. Some glycol ethers have been shown to have a range of toxic effects in humans following absorption and metabolism to their aldehyde and acid metabolites. This study assessed the influence of water mixtures on the dermal absorption of butoxyethanol and ethoxyethanol in vitro through human skin. Butoxyethanol penetrated human skin up to sixfold more rapidly from aqueous solution (50%, 450 mg/ml) than from the neat solvent. Similarly penetration of ethoxyethanol was increased threefold in the presence of water (50%, 697 mg/ml). There was a corresponding increase in apparent permeability coefficient as the glycol ether concentration in water decreased. The maximum penetration rate of water also increased in the presence of both glycol ethers. Absorption through a synthetic membrane obeyed Fick's Law and absorption through rat skin showed a similar profile to human skin but with a lesser effect. The mechanisms for this phenomenon involves disruption of the stratum corneum lipid bilayer by desiccation by neat glycol ether micelles, hydration with water mixtures and the physicochemical properties of the glycol ether-water mixtures. Full elucidation of the profile of absorption of glycol ethers from mixtures is required for risk assessment of dermal exposure. This work supports the view that risk assessments for dermal contact scenarios should ideally be based on absorption data obtained for the relevant formulation or mixture and exposure scenario and that absorption derived from permeability coefficients may be inappropriate for water-miscible solvents

A mild and efficient procedure for the synthesis of ethers from various alkyl halides

Directory of Open Access Journals (Sweden)

Mosstafa Kazemi

2013-10-01

Full Text Available A simple, mild and practical procedure has been developed for the synthesis of symmetrical and unsymmetrical ethers by using DMSO, TBAI in the presence of K2CO3. We extended the utility of Potassium carbonate as an efficient base for the preparation of ethers. A wide range of alkyl aryl and dialkyl ethers are synthezied from treatment of aliphatic alcohols and phenols with various alkyl halides in the prescence of efficient base Potassium carbonate. Secondary alkyl halides were easily converted to corresponding ethers in releatively good yields . This is a mild, simple and practical procedure for the preparation of ethers in high yields and suitable times under mild condition.

Induced production of halogenated diphenyl ethers from the marine-derived fungus Penicillium chrysogenum.

Science.gov (United States)

Yang, Guohua; Yun, Keumja; Nenkep, Viviane N; Choi, Hong Dae; Kang, Jung Sook; Son, Byeng Wha

2010-11-01

Manipulation of the fermentation of the marine-derived fungus Penicillium chrysogenum by addition of CaBr(2) resulted in induced production of bromodiphenyl ether analogs. Two new free-radical-scavenging polybrominated diphenyl ethers, 1 and 2, and three known diphenyl ethers, 3,3'-dihydroxy-5,5'-dimethyldiphenyl ether (3), and an inseparable mixture of violacerol-I (4) and violacerol-II (5) were isolated. The structures of the two new polybromodiphenyl ethers 1 and 2 were assigned by combined spectroscopic-data analysis, including deuterium-induced isotope effect. Compounds 1-3, and a mixture of 4 and 5 exhibited radical-scavenging activities against 1,1-diphenyl-2-picrylhydrazyl with IC(50) values of 18, 15, 42, and 6 μM, respectively. With the exception of 3, the compounds were, therefore, more active than the positive control, ascorbic acid (IC(50) 20 μM).

Synthesis and characterization of tris[butyl-(1-methyl-3-phenyl-propyl)-dithiocarbamato]-cobalt(III) seskvitoluene

OpenAIRE

TIBOR SABO; ISMET M. HODZIC; SRECKO R. TRIFUNOVIC; VESNA M. DJINOVIC; GORAN N. KALUDJEROVIC

2002-01-01

A new bidentate ligand butyl-(1-methyl-3-phenyl-propyl)-dithiocarbamate (bmFpdtc) was prepared, as the sodium salt. In the reaction of hexaaminecobalt(III) chloride with NabmFpdtc, the corresponding tris[butyl-(1-methyl-3-phenyl-propyl)-dithiocarbamato]cobalt(III), [Co(bmFpdtc)3] complex was prepared. The complex was characterized by elemental analysis, infrared, electronic absorption, 1H and 13C-NMR spectroscopy.

Fragrance material review on 2-methyl-4-phenyl-2-butanol.

Science.gov (United States)

Scognamiglio, J; Jones, L; Letizia, C S; Api, A M

2012-09-01

A toxicologic and dermatologic review of 2-methyl-4-phenyl-2-butanol when used as a fragrance ingredient is presented. 2-methyl-4-phenyl-2-butanol is a member of the fragrance structural group Aryl Alkyl Alcohols and is a tertiary alcohol. The AAAs are a structurally diverse class of fragrance ingredients that includes primary, secondary, and tertiary alkyl alcohols covalently bonded to an aryl (Ar) group, which may be either a substituted or unsubstituted benzene ring. The common structural element for the AAA fragrance ingredients is an alcohol group -C-(R1)(R2)OH and generically the AAA fragrances can be represented as an Ar-C-(R1)(R2)OH or Ar-Alkyl-C-(R1)(R2)OH group. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 2-methyl-4-phenyl-2-butanol were evaluated then summarized and includes physical properties, acute toxicity, skin irritation, and skin sensitization data. A safety assessment of the entire Aryl Alkyl Alcohols will be published simultaneously with this document; please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all Aryl Alkyl Alcohols in fragrances. assessment of aryl alkyl alcohols when used as fragrance ingredients. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of Anionically Decorated Caged Neurotransmitters: In Vitro Comparison of 7-Nitroindolinyl- and 2-(p-Phenyl-o-nitrophenyl)propyl-Based Photochemical Probes.

Science.gov (United States)

Kantevari, Srinivas; Passlick, Stefan; Kwon, Hyung-Bae; Richers, Matthew T; Sabatini, Bernardo L; Ellis-Davies, Graham C R

2016-05-17

Neurotransmitter uncaging, especially that of glutamate, has been used to study synaptic function for over 30 years. One limitation of caged glutamate probes is the blockade of γ-aminobutyric acid (GABA)-A receptor function. This problem comes to the fore when the probes are applied at the high concentrations required for effective two-photon photolysis. To mitigate such problems one could improve the photochemical properties of caging chromophores and/or remove receptor blockade. We show that addition of a dicarboxylate unit to the widely used 4-methoxy-7-nitroindolinyl-Glu (MNI-Glu) system reduced the off-target effects by about 50-70 %. When the same strategy was applied to an electron-rich 2-(p-Phenyl-o-nitrophenyl)propyl (PNPP) caging group, the pharmacological improvements were not as significant as in the MNI case. Finally, we used very extensive biological testing of the PNPP-caged Glu (more than 250 uncaging currents at single dendritic spines) to show that nitro-biphenyl caging chromophores have two-photon uncaging efficacies similar to that of MNI-Glu. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Stimulation of Cysteine-Coated CdSe/ZnS Quantum Dot Luminescence by meso-Tetrakis (p-sulfonato-phenyl) Porphyrin

Science.gov (United States)

Parra, Gustavo G.; Ferreira, Lucimara P.; Gonçalves, Pablo J.; Sizova, Svetlana V.; Oleinikov, Vladimir A.; Morozov, Vladimir N.; Kuzmin, Vladimir A.; Borissevitch, Iouri E.

2018-02-01

Interaction between porphyrins and quantum dots (QD) via energy and/or charge transfer is usually accompanied by reduction of the QD luminescence intensity and lifetime. However, for CdSe/ZnS-Cys QD water solutions, kept at 276 K during 3 months (aged QD), the significant increase in the luminescence intensity at the addition of meso-tetrakis (p-sulfonato-phenyl) porphyrin (TPPS4) has been observed in this study. Aggregation of QD during the storage provokes reduction in the quantum yield and lifetime of their luminescence. Using steady-state and time-resolved fluorescence techniques, we demonstrated that TPPS4 stimulated disaggregation of aged CdSe/ZnS-Cys QD in aqueous solutions, increasing the quantum yield of their luminescence, which finally reached that of the fresh-prepared QD. Disaggregation takes place due to increase in electrostatic repulsion between QD at their binding with negatively charged porphyrin molecules. Binding of just four porphyrin molecules per single QD was sufficient for total QD disaggregation. The analysis of QD luminescence decay curves demonstrated that disaggregation stronger affected the luminescence related with the electron-hole annihilation in the QD shell. The obtained results demonstrate the way to repair aged QD by adding of some molecules or ions to the solutions, stimulating QD disaggregation and restoring their luminescence characteristics, which could be important for QD biomedical applications, such as bioimaging and fluorescence diagnostics. On the other hand, the disaggregation is important for QD applications in biology and medicine since it reduces the size of the particles facilitating their internalization into living cells across the cell membrane.

Acidolysis small molecular phenolic ether used as accelerator in photosensitive diazonaphthaquinone systems

Science.gov (United States)

Zhou, Haihua; Zou, Yingquan

2006-03-01

The photosensitive compounds in the photosensitive coatings of positive PS plates are the diazonaphthaquinone derivatives. Some acidolysis small molecular phenolic ethers, which were synthesized by some special polyhydroxyl phenols with vinyl ethyl ether, are added in the positive diazonaphthaquinone photosensitive composition to improve its sensitivity, composed with photo-acid-generators. The effects to the photosensitivity, anti-alkali property, anti-isopropyl alcohol property, dot resolution and line resolution of the coatings are studied with different additive percent of the special phenolic ethers. In the conventional photosensitive diazonaphthaquinone systems for positive PS plates, the photosensitivity is improved without negative effects to resolution, anti-alkali and anti-isopropyl alcohol properties when added about 5% of the special acidolysis phenolic ethers, EAAE or DPHE, composed with photo-acid-generators.

The simple ethers of glycerin

International Nuclear Information System (INIS)

Kimsanov, B.Kh.; Karimov, M.B.

1998-01-01

From glycerin derivatives the considerable interest is present simple ethers because many of them are biological active and found wide practical using as an effect drugs, inters for thin organic synthesis, vehicle for injections, regulators of plants growth, reagents, components for perfumery-cosmetic goods and etc

The PROMETHEE multiple criteria decision making analysis for selecting the best membrane prepared from sulfonated poly(ether ketone)s and poly(ether sulfone)s for proton exchange membrane fuel cell

International Nuclear Information System (INIS)

Nikouei, Mohammad Ali; Oroujzadeh, Maryam; Mehdipour-Ataei, Shahram

2017-01-01

Proton exchange membrane as the heart of fuel cell has been the topic of many research activities in recent years. Finding a suitable alternative for Nafion membranes is one of the most important issues of interest. This study is dedicated to sulfonated poly(ether ketone) and poly(ether sulfone) membranes. For synthesis of these two groups of polymers, two different isomeric biphenols (meta- and para-) were used and each group of membranes with three different degree of sulfonation (25, 35, and 45%) was synthesized. In this way, twelve different membrane samples were obtained and their properties were evaluated. Since each membrane had some strong and some weak points of properties in comparison to the other ones, using a rational analysis for choosing the best membrane between prepared samples was inevitable. For this purpose a PROMETHEE based multiple criteria decision making approach was applied and for evaluation of the weight of each criterion, Shannon entropy method was used. Final results showed that poly(ether ketone) membranes in selected criteria were better than poly(ether sulfone) membranes and as expected, membranes with the highest degree of sulfonation (45%) were placed at the top ranking levels. - Highlights: • Sulfonated poly(ether ketone)s and Poly(ether sulfone)s were synthesized. • Related membranes for PEMFC were prepared. • The properties of membranes were measured. • Multiple criteria decision making approach was used to ranking the membranes. • PROMETHEE based approach selected poly(ether ketone)s as better choices.

Preparation of poly(ether ether ketone)-based polymer electrolytes for fuel cell membranes using grafting technique

International Nuclear Information System (INIS)

Hasegawa, Shin; Suzuki, Yasuyuki; Maekawa, Yasunari

2008-01-01

Poly(ether ether ketone) (PEEK)-based polymer electrolyte membranes (PEMs) was successfully prepared by radiation grafting of a styrene monomer into PEEK films and the consequent selective sulfonation of the grafting chains in the film state. Using milder sulfonation, the sulfonation reactions proceeded at the grafted chains in preference to the phenylene rings of PEEK main chains; as a result, the grafted films could successfully transform to a PEM with conductivity of more than 0.1 S/cm. The ion exchange capacity (IEC) and conductivity of the grafted PEEK electrolyte membranes were controlled to the ranges of 1.2-2.9 mmol/g and 0.03-0.18 S/cm by changing the grafting degree. It should be noted that this is the first example of directly transforming super-engineering plastic films into a PEM using radiation grafting

Sulfonated Poly(Ether Ether Ketone)/Functionalized Carbon Nanotube Composite Membrane for Vanadium Redox Flow Battery Applications

International Nuclear Information System (INIS)

Jia, Chuankun; Cheng, Yuanhang; Ling, Xiao; Wei, Guanjie; Liu, Jianguo; Yan, Chuanwei

2015-01-01

A novel sulfonated poly(ether ether ketone) (SPEEK) membrane embedded with the short-carboxylic multi-walled carbon nanotube (we name it as SPEEK/SCCT membrane) for vanadium redox flow battery (VRB) has been prepared with low capacity loss, low cost and high energy efficiency. The mechanical strength, vanadium ions permeability and performance of the membrane in the VRB single cell were characterized. Results showed that the SPEEK/SCCT membrane possessed low permeability of vanadium ions, accompanied by higher mechanical strength than the Nafion 212 membrane. The VRB single cell with SPEEK/SCCT membrane showed 7% higher coulombic efficiency (CE), 6% higher energy efficiency (EE) but lower capacity loss in comparison with the one with Nafion 212. The good cell performance, low capacity loss and high vanadium ions barrier properties of the blend membrane is of significant interest for VRB applications

Luzindole but not 4-phenyl-2- propionamidotetralin (4P-PDOT) diminishes the inhibitory effect of melatonin on murine Colon 38 cancer growth in vitro.

Science.gov (United States)

Winczyk, Katarzyna; Fuss-Chmielewska, Julita; Lawnicka, Hanna; Pawlikowski, Marek; Karasek, Michal

2009-01-01

Our earlier studies have shown that MLT exerts the inhibitory effect on murine cancer via membrane and nuclear receptors. We have found that the antagonist of MT1 receptors does not diminish the antiproliferative effect of MLT on Colon 38 cells, and the contribution of MT2 receptors has been suggested to be responsible. Therefore, in the present study we have examined the influence of the 4-phenyl-2-propionamidotetralin (4P-PDOT), which is a selective antagonist of MT2 membrane receptor, and luzindole - an antagonist of both membrane receptors, on an oncostatic action of MLT. The murine cancer cell line Colon 38 was used in the experiments. In 48 hrs cell culture the effects of MLT, 4P-PDOT and luzindole administered alone and MLT applied jointly with either 4P-PDOT or luzindole were examined. The growth of cancer cells was assessed using the modified colorimetric Mosmann method. Melatonin at both examined concentrations (10-7, 10-9 M) significantly decreased the viability of cancer cells. The selective antagonist of MT2 membrane receptor, namely 4P-PDOT and luzindole applied separately did not have an effect on the growth of Colon 38 cells. The addition of 4P-PDOT to MLT did not change the inhibitory effect of MLT, whereas luzindole given together with MLT diminished, but failed to block totally, the oncostatic properties of MLT. The obtained data and our previous studies conducted on Colon 38 cancer indicate that membrane melatonin receptors are not indispensable to the oncostatic action of melatonin and thus other pathways such as nuclear signaling and receptor-independent mechanism may be also involved.

DFPE, PARTIALLY FLUORINATED ETHER: A Novel Approach for Experimental Intravitreal Tamponade.

LENUS (Irish Health Repository)

Santos, Rodrigo A V

2012-07-16

PURPOSE:: To evaluate decafluoro-di-n-pentyl ether (DFPE) as a vitreous tamponade by examining ocular tolerance in rabbits\\' eyes. METHODS:: Thirteen rabbits were divided into 4 groups after mechanical vitrectomy and were followed up to 12 months. The tamponade remained in the eye for 6 months in Group 1 (DFPE) and Group 3 (DFPE and silicone oil) and for 12 months in Group 2 (DFPE). Group 4 served as control. RESULTS:: In Groups 1, 2, and 3, dispersion of the fluid appeared 2 weeks postoperatively. Posterior subcapsular cataracts appeared in rabbits\\' eyes with large fills of DFPE (>50%). Histologic findings in Groups 1 and 2 showed no detectable change in outer nuclear layer thickness. Except for some vacuolations, the inner retina was well preserved in all injected rabbits\\' eyes. On the electroretinography of injected rabbits\\' eyes, there was no effect on the a wave amplitude and b wave implicit time, but the b wave amplitude was elevated with statistical significance (P < 0.001) at 1, 3, and 6 months postoperatively but with no statistical significance (P > 0.05) after that period when compared with Group 4 and unoperated fellow rabbits\\' eyes of each group. CONCLUSION:: Decafluoro-di-n-pentyl ether demonstrated minimum adverse effects in retinal rabbits; further studies are needed before clinical use as short-term tamponade.

Influence of structure of crown ethers on their radiation stability

International Nuclear Information System (INIS)

Grigor'ev, E.I.; Myasoedova, T.G.; Nesterov, S.V.; Trakhtenberg, L.I.

1988-01-01

Primary products of γ-radiolysis of crown ethers with the same size of the macrocyclic ring and different substituents were studied by EPR and mass spectrometry. It was shown that introduction of substituents into the polyether ring increases the radiation stability of crown ethers due to intramolecular transfer of energy from the polyether ring to a substituent

Degradation of Perfluorinated Ether Lubricants on Pure Aluminum Surfaces: Semiempirical Quantum Chemical Modeling

Science.gov (United States)

Slaby, Scott M.; Ewing, David W.; Zehe, Michael J.

1997-01-01

The AM1 semiempirical quantum chemical method was used to model the interaction of perfluoroethers with aluminum surfaces. Perfluorodimethoxymethane and perfluorodimethyl ether were studied interacting with aluminum surfaces, which were modeled by a five-atom cluster and a nine-atom cluster. Interactions were studied for edge (high index) sites and top (low index) sites of the clusters. Both dissociative binding and nondissociative binding were found, with dissociative binding being stronger. The two different ethers bound and dissociated on the clusters in different ways: perfluorodimethoxymethane through its oxygen atoms, but perfluorodimethyl ether through its fluorine atoms. The acetal linkage of perfluorodimeth-oxymethane was the key structural feature of this molecule in its binding and dissociation on the aluminum surface models. The high-index sites of the clusters caused the dissociation of both ethers. These results are consistent with the experimental observation that perfluorinated ethers decompose in contact with sputtered aluminum surfaces.

A 4-(o-chlorophenyl)-2-aminothiazole: Microwave assisted synthesis, spectral, thermal, XRD and biological studies

Science.gov (United States)

Rajmane, S. V.; Ubale, V. P.; Lawand, A. S.; Nalawade, A. M.; Karale, N. N.; More, P. G.

2013-11-01

A 4-(o-chlorophenyl)-2-aminothiazole (CPAT) has been synthesized by reacting o-chloroacetophenone, iodine and thiourea under microwave irradiation as a green chemistry approach. The reactions proceed selectively and within a couple of minutes giving high yields of the products. The compound was characterized by elemental, spectral (UV-visible, IR, NMR and GC-MS), XRD and thermal analyses. The TG curve of the compound was analyzed to calculate various kinetic parameters (n, E, Z, ΔS and ΔG) by using Coats-Redfern (C.R.), MacCallum-Tanner (M.T.) and Horowitz-Metzger (H.M.) method. The compound was tested for the evaluation of antibacterial activity against B. subtilis and E. coli and antifungal activity against A. niger and C. albicans. The compound was evaluated for their in vitro nematicidal activity on plant parasitic nematode Meloidogyne javanica and molluscicidal activity on fresh water helminthiasis vector snail Lymnea auricularia. The compound is biologically active in very low concentration. X-ray diffraction study suggests a triclinic crystal system for the compound.

Comparison of Nootropic and Neuroprotective Features of Aryl-Substituted Analogs of Gamma-Aminobutyric Acid.

Science.gov (United States)

Tyurenkov, I N; Borodkina, L E; Bagmetova, V V; Berestovitskaya, V M; Vasil'eva, O S

2016-02-01

GABA analogs containing phenyl (phenibut) or para-chlorophenyl (baclofen) substituents demonstrated nootropic activity in a dose of 20 mg/kg: they improved passive avoidance conditioning, decelerated its natural extinction, and exerted antiamnestic effect on the models of amnesia provoked by scopolamine or electroshock. Tolyl-containing GABA analog (tolibut, 20 mg/kg) exhibited antiamnestic activity only on the model of electroshock-induced amnesia. Baclofen and, to a lesser extent, tolibut alleviated seizures provoked by electroshock, i.e. both agents exerted anticonvulsant effect. All examined GABA aryl derivatives demonstrated neuroprotective properties on the maximum electroshock model: they shortened the duration of coma and shortened the period of spontaneous motor activity recovery. In addition, these agents decreased the severity of passive avoidance amnesia and behavioral deficit in the open field test in rats exposed to electroshock. The greatest neuroprotective properties were exhibited by phenyl-containing GABA analog phenibut.

Synthesis and characterization of tris[butyl-(1-methyl-3-phenyl-propyl-dithiocarbamato]-cobalt(III seskvitoluene

Directory of Open Access Journals (Sweden)

TIBOR SABO

2002-02-01

Full Text Available A new bidentate ligand butyl-(1-methyl-3-phenyl-propyl-dithiocarbamate (bmFpdtc was prepared, as the sodium salt. In the reaction of hexaaminecobalt(III chloride with NabmFpdtc, the corresponding tris[butyl-(1-methyl-3-phenyl-propyl-dithiocarbamato]cobalt(III, [Co(bmFpdtc3] complex was prepared. The complex was characterized by elemental analysis, infrared, electronic absorption, 1H and 13C-NMR spectroscopy.

An efficient synthesis of S-[gamma]-[(4-trifluoromethyl)phenoxy] benzenepropanamine-[1-[sup 14]C]maleate, an important metabolite of fluoxetine hydrochloride. [Antidepressant, serotonin uptake inhibitor

Energy Technology Data Exchange (ETDEWEB)

Wheeler, W.J. (Lilly (Eli) and Co., Indianapolis, IN (United States). Lilly Research Labs.)

1992-02-01

S-[gamma]-[(4-Trifluoromethyl)phenoxy]benzenepropanamine-[1-[sup 14]C] maleate has been prepared in six steps from R-(-)1-phenyl-1,2-ethanediol. The isotope was incorporated by the reaction of NaCN-[[sup 14]C] with the tert. butyldimethylsilyl ether of R-(-)1-phenyl-1,2-ethane-diol 2-tosylate. Borane reduction and arylation, followed by salt formation yielded S-[gamma]-[(4-trifluoromethyl)phenoxy]benzenepropanamine-[1-[sup 14]C] maleate. (Author).

Increasing the thermopower of crown-ether-bridged anthraquinones

Science.gov (United States)

Ismael, Ali K.; Grace, Iain; Lambert, Colin J.

2015-10-01

We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The thermopowers of both 1 and 2 are negative and at room temperature are optimised by binding with TTF alone, achieving thermpowers of -600 μV K-1 and -285 μV K-1 respectively. At much lower temperatures, which are relevant to cascade coolers, we find that for 1, a combination of TTF and Na+ yields a maximum thermopower of -710 μV K-1 at 70 K, whereas a combination of TTF and Li+ yields a maximum thermopower of -600 μV K-1 at 90 K. For 2, we find that TTF doping yields a maximum thermopower of -800 μV K-1 at 90 K, whereas at 50 K, the largest thermopower (of -600 μV K-1) is obtain by a combination TTF and K+ doping. At room temperature, we obtain power factors of 73 μW m-1 K-2 for 1 (in combination with TTF and Na+) and 90 μW m-1 K-2 for 2 (with TTF). These are higher or comparable with reported power factors of other organic materials.We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The

Development and characterization of poli composites (ether ether ketone)(PEEK)(Hydroxyapatite(HA)

International Nuclear Information System (INIS)

Ferreira, V.P.; Santos, F.S.F.; Sa, M.D. de; Fook, M.V.L.

2016-01-01

The objective of this work was to develop PEEK / HA composites, combining the biological activity of the ceramic phase with the properties of the polymer phase, the materials used in this research were Poly (ether-ether-ketone) (PEEK) and Hydroxyapatite (HA) (50, 60, 70 and 80% m / v HA), this material was subjected to a load of two tons followed by a thermal treatment at 390 ° for a period of 30 minutes. Then they were characterized by FTIR, DRX and MO. In the physical-chemical characterization of FTIR and XRD, it was not possible to identify significant alterations. In the FTIR spectra of the composites, there is no formation of new identifiable chemical bonds. In the composites XRD diffractograms a profile similar to the ceramic phase was observed, with peaks increasing in intensity and narrowing proportional to the increase of the hydroxyapatite concentration in the composites. In optical microscopy it is possible to observe surfaces with heterogeneous morphology, with signs of roughness and in the cross section we observe a heterogeneous aspect, rich in regions with large agglomerates and lighter particles. Considering the processing aspects, the technique proved to be effective for the development of PEEK /HA composites. (author)

Robust Inclusion Complexes of Crown Ether Fused Tetrathiafulvalenes with Li+@C-60 to Afford Efficient Photodriven Charge Separation

DEFF Research Database (Denmark)

Supur, M.; Kawashima, Y.; Larsen, K. R.

2014-01-01

) obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6-311G(d,p) level, the orbital interactions between the crown ether moieties and the p surface of the fullerene together with the endohedral Li+ have a crucial role in robust complex formation...

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Energy Technology Data Exchange (ETDEWEB)

Li, Hongtao; Zhang, Gang; Wu, Jing; Zhao, Chengji; Zhang, Yang; Shao, Ke; Han, Miaomiao; Lin, Haidan; Zhu, Jing; Na, Hui [Alan G MacDiarmid Institute, College of Chemistry, Jilin University, Qianjin Street 2699, Changchun 130012, Jilin (China)

2010-10-01

A novel poly(ether ether ketone) (PEEK) containing pendant carboxyl groups has been synthesized by a nucleophilic polycondensation reaction. Sulfonated polymers (SPEEKs) with different ion exchange capacity are then obtained by post-sulfonation process. The structures of PEEK and SPEEKs are characterized by both FT-IR and {sup 1}H NMR. The properties of SPEEKs as candidates for proton exchange membranes are studied. The cross-linking reaction is performed at 140 C using poly(vinyl alcohol) (PVA) as the cross-linker. In comparison with the non-cross-linked membranes, some properties of the cross-linked membranes are significantly improved, such as water uptake, methanol resistance, mechanical and oxidative stabilities, while the proton conductivity decreases. The effect of PVA content on proton conductivity, water uptake, swelling ratio, and methanol permeability is also investigated. Among all the membranes, SPEEK-C-8 shows the highest selectivity of 50.5 x 10{sup 4} S s cm{sup -3}, which indicates that it is a suitable candidate for applications in direct methanol fuel cells. (author)

Rheological, mechanical and tribological properties of carbon-nanofibre reinforced poly (ether ether ketone composites

Directory of Open Access Journals (Sweden)

Volker Altstaedt

2003-12-01

Full Text Available Poly(ether ether ketone nanocomposites containing vapour-grown carbon nanofibres (CNF were produced using standard polymer processing techniques. At high shear rates no significant increase in resin viscosity was observed. Nevertheless, the addition of the CNFs results in a higher melt strength at 360°C. Electron microscopy confirmed the homogeneous dispersion and alignment of nanofibres in the polymer matrix. Evaluation of the mechanical composite properties revealed a linear increase in tensile stiffness and strength with nanofibre loading fractions up to 15 wt% whilst matrix ductility was maintained up to 10 wt%. An interpretation of the composite performance by short-fibre theory resulted in rather low intrinsic stiffness properties of the vapour-grown CNF. Differential scanning calorimetry was used to investigate crystallization kinetics and degree of crystallinity. The CNFs were found not to act as nucleating sites. Furthermore, unidirectional sliding tests against two different counterpart materials (100Cr6 martensitic bearing steel, X5CrNi18-10 austenitic stainless steel were performed. The carbon nanofibres were found to reduce the wear rate of PEEK significantly.

Ether gas-sensor based on Au nanoparticles-decorated ZnO microstructures

Directory of Open Access Journals (Sweden)

Roberto López

Full Text Available An ether gas-sensor was fabricated based on gold nanoparticles (Au-NPs decorated zinc oxide microstructures (ZnO-MS. Scanning electron microscope (SEM and high-resolution transmission electron microscope (HRTEM measurements were performed to study morphological and structural properties, respectively, of the ZnO-MS. The gas sensing response was evaluated in a relatively low temperature regime, which ranged between 150 and 250 °C. Compared with a sensor fabricated from pure ZnO-MS, the sensor based on Au-NPs decorated ZnO-MS showed much better ether gas response at the highest working temperature. In fact, pure ZnO-MS based sensor only showed a weak sensitivity of about 25%. The improvement of the ether gas response for sensor fabricated with Au-NPs decorated ZnO-MS was attributed to the catalytic activity of the Au-NPs. Keywords: ZnO microstructures, Au nanoparticles, Ether, Gas sensor

123I and131I labelled p-iodophenylpentadecanoic acid (p-IPPA): simplified preparation. Biodistribution in mice, rabbits and patients

International Nuclear Information System (INIS)

Angelberger, P.; Wagner-Loeffler, M.; Hruby, R.; Dudczak, R.; Schmoliner, R.; Kletter, K.; Frischauf, H.

1981-01-01

In an attempt to avoid the second injection of radioiodide as an internal standard for catabolically released iodide, Machulla et al proposed 15-phenyl-penta-decanoic acid (PPA), labelled at the phenyl ring, for myocardial imaging and metabolic studies. PPA is catabolized via β-oxidation to benzoic acid which is known to be rapidly excreted as hippuric acid. After labelling, three sequential HPLC separations were recommended to purify the labelled p-Isomer (p-IPPA). In this process three intermediate evaporation steps have also to be performed. Thus it seems important to look for improved purification procedures which may possibly reduce the preparation time. The present report compares different purification procedures and relates them to the biodistribution of the final product in mice and rabbits. (Auth.)

[2-(2,4-dimethylphenylthio)phenyl] aniline and its amide derivatives ...

Indian Academy of Sciences (India)

YOGESH PATIL

2018-02-15

Feb 15, 2018 ... These derivatives could be considered as a precursor structure for further design of antituberculosis agent. Keywords. [2-(2,4-dimethylphenylthio)phenyl] aniline; antituberculosis activity; cytotoxicity. 1. Introduction. Tuberculosis (TB) is a contagious disease caused by the. Mycobacterium tuberculosis (MTB).

Biomedical potentials of crown ethers: prospective antitumor agents.

Science.gov (United States)

Kralj, Marijeta; Tusek-Bozić, Ljerka; Frkanec, Leo

2008-10-01

Crown ethers are of enormous interest and importance in chemistry, biochemistry, materials science, catalysis, separation, transport and encapsulated processes, as well as in the design and synthesis of various synthetic systems with specific properties, diverse capabilities, and programmable functions. Classical crown ethers are macrocyclic polyethers that contain 3-20 oxygen atoms separated from each other by two or more carbon atoms. They are exceptionally versatile in selectively binding a range of metal ions and a variety of organic neutral and ionic species. Crown ethers are currently being studied and used in a variety of applications beyond their traditional place in chemistry. This review presents additional applications and the ever-increasing biomedical potentials of these intriguing compounds, with particular emphasis on the prospects of their relevance as anticancer agents. We believe that further research in this direction should be encouraged, as crown compounds could either induce toxicities that are different from those of conventional antitumor drugs, or complement drugs in current use, thereby providing a valuable adjunct to therapy.

Diethyl Ether Production Process with Various Catalyst Type

Directory of Open Access Journals (Sweden)

Widayat

2013-01-01

Full Text Available Several H-zeolite and HZSM-5 catalysts was preparated and their characters have also been investigated. H-zeolit Catalyst was preparated from Natural Zeolite that obtained from Malang District and Gunung Kidul District. Diethyl ether was produced by Ethanol with concentration of 95%. This research use fixed bed reactor that 1 gram of catalyst as bed catalyst, atmospheric pressure and temperature 140oC as the operating condition. Ethanol vapor from vaporization tank was driven by 200 ml/min Nitrogen stream. The responds in this research is liquid product concentration; diethyl ether, ethanol, methanol and water concentration. The results showed that the largest ethanol conversion was produced by the use of 56.44% HZSM-5 and the largest yield of diethyl ether diethyl was produced by the use of alumina and H-zeolite catalyst. The larger ratio between natural zeolite with HCl solvent will produce the larger surface area of catalyst and ethanol conversion. The largest ethanol conversion was produced at reactan ratio 1:20.

Separation of thorium from lanthanides by solvent extraction with ionizable crown ethers

International Nuclear Information System (INIS)

Du, H.S.; Wood, D.J.; Elshani, Sadik; Wai, C.M.

1993-01-01

Thorium and the lanthanides are extracted by α-(sym-dibenzo-16-crown-5-oxy)acetic acid and its analogues in different pH ranges. At pH 4.5, Th is quantitatively extracted by the crown ether carboxylic acids into chloroform whereas the extraction of the lanthanides is negligible. Separation of Th from the lanthanides can be achieved by solvent extraction under this condition. The extraction does not require specific counteranions and is reversible with respect to pH. Trace amounts of Th in water can be quantitatively recovered using this extraction system for neutron activation analysis. The nature of the extracted Th complex and the mechanism of extraction are discussed. (author)

Proton-conducting membranes based on benzimidazole-containing sulfonated poly(ether ether ketone) compared with their carboxyl acid form

Energy Technology Data Exchange (ETDEWEB)

Li, Hongtao; Wu, Jing; Zhao, Chengji; Zhang, Gang; Zhang, Yang; Shao, Ke; Xu, Dan; Lin, Haidan; Han, Miaomiao; Na, Hui [Alan G MacDiarmid Institute, College of Chemistry, Jilin University, Changchun 130012 (China)

2009-10-15

A series of sulfonated poly(ether ether ketone) containing pendant carboxyl (C-SPEEKs) have been synthesized using a nucleophilic polycondesation reaction. A condensation reaction between 1,2-diaminobenzene and carboxyl resulted in a new series of copolymers containing benzimidazole groups (SPEEK-BIms). The expected structures of the sulfonated copolymers are confirmed by {sup 1}H NMR. The dependence of ion exchange capacity, water uptake, proton conductivity and methanol diffusion coefficient of SPEEK-BIm membranes has been studied and compared with their carboxyl acid form. The results suggest that the introduction of benzimidazole groups may be responsible for many excellent properties of the membranes for fuel cell. It is noticeable that the markedly improved oxidative stability is benefit for the application of membrane. (author)

Screening of chemokine receptor CCR4 antagonists by capillary zone electrophoresis

Directory of Open Access Journals (Sweden)

Zhe Sun

2011-11-01

Full Text Available CC chemokine receptor 4 (CCR4 is a kind of G-protein-coupled receptor, which plays a pivotal role in allergic inflammation. The interaction between 2-(2-(4-chloro-phenyl-5-{[(naphthalen-1-ylmethyl-carbamoyl]-methyl}-4-oxo-thiazolidin-3-yl-N-(3-morpholin-4-yl-propyl-acetamide (S009 and the N-terminal extracellular tail (ML40 of CCR4 has been validated to be high affinity by capillary zone electrophoresis (CZE. The S009 is a known CCR4 antagonist. Now, a series of new thiourea derivatives have been synthesized. Compared with positive control S009, they were screened using ML40 as target by CZE to find some new drugs for allergic inflammation diseases. The synthesized compounds XJH-5, XJH-4, XJH-17 and XJH-1 displayed the interaction with ML40, but XJH-9, XJH-10, XJH-11, XJH-12, XJH-13, XJH-14, XJH-3, XJH-8, XJH-6, XJH-7, XJH-15, XJH-16 and XJH-2 did not bind to ML40. Both qualification and quantification characterizations of the binding were determined. The affinity of the four compounds was valued by the binding constant, which was similar with the results of chemotactic experiments. The established CEZ method is capable of sensitive and fast screening for a series of lactam analogs in the drug discovery for allergic inflammation diseases. Keywords: Capillary zone electrophoresis, CCR4 antagonist, 2-(2-(4-chloro-phenyl-5-{[(naphthalen-1-ylmethyl-carbamoyl]-methyl}-4-oxo-thiazolidin-3-yl-N-(3-morpholin-4-yl-propyl-acetamide, Interactions, Structural modification

2-[(3,5-Dimethyl-1-phenyl-1H-pyrazol-4-ylmethylene]indane-1,3-dione

Directory of Open Access Journals (Sweden)

Abdullah M. Asiri

2011-02-01

Full Text Available The title compound 2-[(3,5-dimethyl-1-phenyl-1H-pyrazol-4-ylmethylene]-indane-1,3-dione (3 was synthesized in high yield by reaction of 3,5-dimethyl-1-phenyl-pyrazole-4-carbaldehyde and indane-1,3-dione in ethanol in the presence of pyridine. The structure of this new compound was confirmed by elemental analysis, IR, 1H NMR, 13C NMR and GC-MS spectral analysis.

Protective effects of ether, oxygen and their mixture for radiation in Drosophila melanogaster

International Nuclear Information System (INIS)

Megumi, Tsuneo; Tsujii, Yukio; Gamo, Sumiko

1992-01-01

Protective effects of ether mixed with air or oxygen against ionizing radiation damages were demonstrated in adult flies of Drosophila melanogaster. The protective effects against knock-down on the second day and lethality on the eighth day after irradiation were not affected by the radiation sensitivity and DNA repair capacity of the strains. Ether (4.2%) in oxygen was more effective than ether in air for both endpoints. The protective effects may be due to damages not involving cell division, since no mitotic cells are observed in adult flies except in gonadal glands. A change in the orderliness of the cell membrane by ether is suggested to be the cause of the protective effects. (author). 16 refs.; 3 tabs

Radiolytic decomposition of 4-bromodiphenyl ether

International Nuclear Information System (INIS)

Tang Liang; Xu Gang; Wu Wenjing; Shi Wenyan; Liu Ning; Bai Yulei; Wu Minghong

2010-01-01

Polybrominated diphenyl ethers (PBDEs) spread widely in the environment are mainly removed by photochemical and anaerobic microbial degradation. In this paper, the decomposition of 4-bromodiphenyl ether (BDE -3), the PBDEs homologues, is investigated by electron beam irradiation of its ethanol/water solution (reduction system) and acetonitrile/water solution (oxidation system). The radiolytic products were determined by GC coupled with electron capture detector, and the reaction rate constant of e sol - in the reduction system was measured at 2.7 x 10 10 L · mol -1 · s -1 by pulsed radiolysis. The results show that the BDE-3 concentration affects strongly the decomposition ratio in the alkali solution, and the reduction system has a higher BDE-3 decomposition rate than the oxidation system. This indicates that the BDE-3 was reduced by effectively capturing e sol - in radiolytic process. (authors)

Treatment of simulated wastewater containing n-phenyl-n-isopropyl-p-phenylenediamine using electrolysis system with Ti/TiRuO2 electrodes

Directory of Open Access Journals (Sweden)

Thelma Helena Inazaki

2004-11-01

Full Text Available This study investigated the effects of the electrolytic treatment in the simulated wastewater with aromatic amine n-phenyl-n-isopropyl-p-phenylenediamine (Flexzone 3P® using Ti/TiRuO2 electrodes under 0.025 A/cm² (DC for different electrolysis durations (5; 15; 30; 45 and 60 min. Conductivity, pH, UV-visible spectra, gas chromatograms, toxicity and biodegradation tests were carried out. During the electrolytic treatment the pH decreased and conductivity increased slightly. After 60 min of electrolysis, the concentration of Flexzone 3P decreased by 65.1%. UV-vis spectra and chromatograms of simulated wastewater showed changes in the molecular structure of the aromatic amine. After 5 and 15 min of electrolysis, the simulated wastewater containing the Flexzone 3P showed detoxification by Saccharomyces cerevisiae toxicity test. The electrolysis of 5 min improved the biodegradation of the simulated wastewater containing Flexzone 3P.O presente trabalho apresenta os resultados dos tratamentos eletrolíticos (05; 15; 30; 45 e 60 min no efluente simulado com o composto Flexzone 3P, utilizando-se eletrodos de Ti/TiRuO2, sob 0,025 A cm-2. Após as eletrólises, foram feitas análises de pH, condutividade, espectrofotometria no UV-vis, análise por cromatografia gasosa, ensaios de toxicidade utilizando Saccharomyces cerevisiae e ensaio de respirometria de Bartha. O pH dos efluentes foi diminuindo à medida que aumentou- se o tempo de eletrólise, ao contrário da condutividade, a qual apresentou pequeno aumento. Verificou-se que após 60 min de tratamento foi obtida diminuição da concentração do composto Flexzone 3P em 65,1%. Analisando-se os espectros de UV-vis e cromatogramas do efluente após realização do tratamento eletrolítico, concluiu-se que ocorreram oxidações e transformações de funções orgânicas do composto, durante os tratamentos. Após a realização do tratamento eletrolítico, o efluente simulado apresentou diminuição da

Spino ether and its vortices: leptons and hadrons

Energy Technology Data Exchange (ETDEWEB)

Skorski, R [College of Engineering, Univ. of Alabama, Alabama (USA)

1977-03-01

According to the theory advanced by the author, space is occupied by a spino ether lattice. Where no spino lattice exists, there are black holes. The spino is a kind of massive neutrino with a rest mass of about 7.39x10/sup -47/g and a diameter of 4.56x10/sup -34/cm. The distance between spinos in the spino lattice is about 2x10/sup -10/cm. Spino ether is ubiquitous in all matter, pervades atoms and their nuclei and penetrates matter with no resistance. In fact, hadrons and leptons are shown to be vortices of the spino ether. About one km/sup 3/ of space contains spino ether having a mass equal to 10/sup 80/ baryons, equivalent to the total mass of our universe. If the distances between spinos equaled their diameters, 4.56x10/sup -34/cm instead of 2x10/sup -10/cm, then the diameter of the mass equivalent to our universe would be about 2cm. This is in agreement with the size of the premordial universe, before its explosion, as calculated earlier by other theories. It is conjectured that explosions of energy and mass in space are more frequent on a smaller scale than those in the universe, for example novas, or even on a still smaller scale usually associated with the birth of different nuclei. The abundance of iron in the solar corona, on the surface of Mars, and in the Martin sky appears to be due to hadron formation from space itself.

Dimethylzinc-Initiated Radical Coupling of β-Bromostyrenes with Ethers and Amines

DEFF Research Database (Denmark)

Sølvhøj, Amanda Birgitte; Ahlburg, Andreas; Madsen, Robert

2015-01-01

A new coupling reaction has been developed in which β-bromostyrenes react with ethers and tertiary amines to introduce the styryl group in the α-position. The transformation is mediated by Me2Zn/O2 with 10 % MnCl2 and is believed to proceed by a radical addition-elimination mechanism. The ether...... and the amine are employed as solvent and the coupling takes place through the most stable α radical for unsymmetrical substrates. The products are obtained in moderate to good yields as the pure E isomers. The coupling can be achieved with a range of smaller cyclic and acyclic ethers/amines as well as various...

3,5-Bis(4-meth­oxy­phen­yl)-1-phenyl-4,5-dihydro-1H-pyrazole

OpenAIRE

Baktır, Zeliha; Akkurt, Mehmet; Samshuddin, S.; Narayana, B.; Yathirajan, H. S.

2011-01-01

In the title compound, C23H22N2O2, the central pyrazole ring is nearly planar (r.m.s. deviation = 0.046 Å) and it makes a dihedral angle of 18.5 (2)° with the phenyl ring. The dihedral angles between the phenyl and the two methoxy-substituted phenyl rings are 26.2 (2) and 80.6 (2)°. The crystal structure is stabilized by C—H...π stacking interactions and weak π–π interactions [cen...

Why Do Simple Molecules with "Isolated" Phenyl Rings Emit Visible Light?

Science.gov (United States)

Zhang, Haoke; Zheng, Xiaoyan; Xie, Ni; He, Zikai; Liu, Junkai; Leung, Nelson L C; Niu, Yingli; Huang, Xuhui; Wong, Kam Sing; Kwok, Ryan T K; Sung, Herman H Y; Williams, Ian D; Qin, Anjun; Lam, Jacky W Y; Tang, Ben Zhong

2017-11-15

π-Bonds connected with aromatic rings were generally believed as the standard structures for constructing highly efficient fluorophores. Materials without these typical structures, however, exhibited only low fluorescence quantum yields and emitted in the ultraviolet spectral region. In this work, three molecules, namely bis(2,4,5-trimethylphenyl)methane, 1,1,2,2-tetrakis(2,4,5-trimethylphenyl)ethane, and 1,1,2,2-tetraphenylethane, with nonconjugated structures and isolated phenyl rings were synthesized and their photophysical properties were systematically investigated. Interestingly, the emission spectra of these three molecules could be well extended to 600 nm with high solid-state quantum yields of up to 70%. Experimental and theoretical analyses proved that intramolecular through-space conjugation between the "isolated" phenyl rings played an important role for this abnormal phenomenon.

Energetic effects of ether and ketone functional groups in 9,10-dihydroanthracene compound

International Nuclear Information System (INIS)

Freitas, Vera L.S.; Gomes, Jose R.B.; Ribeiro da Silva, Maria D.M.C.

2010-01-01

The energetic effects caused by replacing one of the methylene groups in the 9,10-dihydroanthracene by ether or ketone functional groups yielding xanthene and anthrone species, respectively, were determined from direct comparison of the standard (p o = 0.1 MPa) molar enthalpies of formation in the gaseous phase, at T = 298.15 K, of these compounds. The experimental static-bomb combustion calorimetry and Calvet microcalorimetry and the computational G3(MP2)//B3LYP method were used to get the standard molar gas-phase enthalpies of formation of xanthene, (41.8 ± 3.5) kJ . mol -1 , and anthrone, (31.4 ± 3.2) kJ . mol -1 . The enthalpic increments for the substitution of methylene by ether and ketone in the parent polycyclic compound (9,10-dihydroanthracene) are -(117.9 ± 5.5) kJ . mol -1 and -(128.3 ± 5.4) kJ . mol -1 , respectively.

Poly (ether ether ketone) membranes for fuel cells; Membranas de poli (eter eter cetona) sulfonado para celulas a combustivel

Energy Technology Data Exchange (ETDEWEB)

Marrero, Jacqueline C.; Gomes, Ailton de S.; Filho, Jose C.D., E-mail: jacquecosta@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Hui, Wang S. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil); Oliveira, Vivianna S. de [Escola Tecnica Rezende-Rammel, Rio de Janeiro, RJ (Brazil)

2015-07-01

Polymeric membranes were developed using a SPEEK polymer matrix (sulphonated poly (ether ether ketone)), containing hygroscopic particles of zirconia (Zr) (incorporated by sol-gel method), for use as electrolyte membranes in fuel cells. SPEEK with different sulfonation degrees were used: 63 and 86%. The thermal analysis (TGA and DSC) was carried out to characterize the membranes and electrochemical impedance spectroscopy (EIS) was carried out to evaluating the proton conductivity of the membranes. Additional analysis were underway in order to characterize these membranes, which include: X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) in order to evaluate the influence of zirconia and sulfonation degree on the properties of the membranes. (author)

Click functionalization of phenyl-capped bithiophene on azide-terminated self-assembled monolayers

International Nuclear Information System (INIS)

Zheng, Yijun; Cui, Jiaxi; Ikeda, Taichi

2015-01-01

Graphical abstract: - Highlights: • Electrochemically-active self-assembled monolayers with phenyl-capped bithiophene were prepared. • Post-functionalization method based on click chemistry solved the solubility issue of phenyl-capped thiophene alkanethiol. • The capture and release of the counter anions during the redox reaction were detectable by E-QCM. - Abstract: We immobilized tetra(ethylene glycol)-substituted phenyl-capped bithiophene with alkyne terminals (Ph2TPh-alkyne) on azide-terminated self-assembled monolayers (N 3 -SAMs) by Cu-catalyzed azide-alkyne cycloaddition reaction. Ph2TPh-functionalized SAMs on a gold substrate showed reversible electrochemical response. The surface densities of the azide groups in N 3 -SAMs and Ph2TPh units in Ph2TPh-functionalized SAMs were estimated to be 7.3 ± 0.3 × 10 −10 mol cm −2 and 4.6 ± 0.3 × 10 −10 mol cm −2 , respectively, by quartz crystal microbalance (QCM). Most of Ph2TPh-alkynes are considered to be anchored on N 3 -SAMs via both terminal groups. Ph2TPh-functionalized SAMs exhibited reversible redox peaks in cyclic voltammetry (CV). In redox reaction, reversible capture and release of the counter anion could be monitored by electrochemical QCM (E-QCM).

Click functionalization of phenyl-capped bithiophene on azide-terminated self-assembled monolayers

Energy Technology Data Exchange (ETDEWEB)

Zheng, Yijun; Cui, Jiaxi [Max Planck Institute for Polymer Research (MPIP), Ackermannweg 10, Mainz 55128 (Germany); Ikeda, Taichi, E-mail: IKEDA.Taichi@nims.go.jp [Max Planck Institute for Polymer Research (MPIP), Ackermannweg 10, Mainz 55128 (Germany); Polymer Materials Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044 (Japan)

2015-11-15

Graphical abstract: - Highlights: • Electrochemically-active self-assembled monolayers with phenyl-capped bithiophene were prepared. • Post-functionalization method based on click chemistry solved the solubility issue of phenyl-capped thiophene alkanethiol. • The capture and release of the counter anions during the redox reaction were detectable by E-QCM. - Abstract: We immobilized tetra(ethylene glycol)-substituted phenyl-capped bithiophene with alkyne terminals (Ph2TPh-alkyne) on azide-terminated self-assembled monolayers (N{sub 3}-SAMs) by Cu-catalyzed azide-alkyne cycloaddition reaction. Ph2TPh-functionalized SAMs on a gold substrate showed reversible electrochemical response. The surface densities of the azide groups in N{sub 3}-SAMs and Ph2TPh units in Ph2TPh-functionalized SAMs were estimated to be 7.3 ± 0.3 × 10{sup −10} mol cm{sup −2} and 4.6 ± 0.3 × 10{sup −10} mol cm{sup −2}, respectively, by quartz crystal microbalance (QCM). Most of Ph2TPh-alkynes are considered to be anchored on N{sub 3}-SAMs via both terminal groups. Ph2TPh-functionalized SAMs exhibited reversible redox peaks in cyclic voltammetry (CV). In redox reaction, reversible capture and release of the counter anion could be monitored by electrochemical QCM (E-QCM).

Influence of glyceryl guaiacolate ether on anesthetics in tilapia compared to benzocaine and eugenol

Directory of Open Access Journals (Sweden)

Geovana R. Cosenza

2014-03-01

Full Text Available Objective. The study aimed to investigate the effectiveness of glyceryl guaiacolate ether (GGE and compare the times of induction, recovery, hematological changes, total protein and glycaemia among anesthetics in Nile tilapia, Oreochromis niloticus. Materials and methods. A total of 60 tilapia distributed in 3 aquariums (N=20 were used, which formed the group benzocaine (100 mg/L, eugenol (50 mg/L and guaiacol glyceryl ether (9.000 mg/L. After the induction of anesthesia fish blood samples were collected to determine the complete hemogram and glycemia. Then the animals were placed in aquariums with running water for assessing the anesthesia recovery. Results. It was verified that GGE showed longer induction and recovery times as well a significant increase (p0.05. An increase in the number of monocytes in the group treated with benzocaine (p <0.05 was observed in the analysis of the hematological parameters with no difference between groups for other variables. Conclusions. Eugenol and benzocaine allow rapid induction and recovery in Nile tilapia, without evidence of stress during handling and GGE showed high induction and recovery times, being inadequate for anesthetic use in Nile tilapia.

Design, synthesis and inhibitory activities of 8-(substituted styrol-formamido)phenyl-xanthine derivatives on monoamine oxidase B.

Science.gov (United States)

Hu, Suwen; Nian, Siyun; Qin, Kuiyou; Xiao, Tong; Li, Lingna; Qi, Xiaolu; Ye, Faqing; Liang, Guang; Hu, Guoxin; He, Jincai; Yu, Yinfei; Song, Bo

2012-01-01

The design and synthesis of two series of 8-(substituted styrol-formamido)phenyl-xanthine derivatives are described. Their in vitro monoamine oxidase B (MAO-B) inhibition were tested and the effect of substituents on the N-7, phenyl and the substituted positions are discussed. It was observed that compound 9b displayed significant MAO-B inhibition activity and selectivity, fluorine substitution plays a key role in the selectivity of MAO-B inhibition, and the styrol-formamido group at position-3' may enhance the activity and selectivity of 8-phenyl-xanthine analogues. These results suggest that such compounds may be utilized for the development of new candidate MAO-B inhibitors for treatment of Parkinson's disease.

IRON(III) NITRATE-CATALYZED FACILE SYNTHESIS OF DIPHENYLMETHYL (DPM) ETHERS FROM ALCOHOLS

Science.gov (United States)

Diphenyl methyl (DPM) ethers constitute important structural portion of some pharmaceutical entities and also as protective group for hydroxyl groups in synthetic chemistry. DPM ethers are normally prepared using concentrated acids or base as catalysts, which may result in the fo...

Structure of pyridine and quinoline vinyl ethers according to data from 1H and 13C NMR spectra and quantum-chemical calculations

International Nuclear Information System (INIS)

Afonin, A.V.; Voronov, V.K.; Andriankov, M.A.; Danovich, D.K.

1987-01-01

A systematic investigation of the structure of the vinyl ethers of heterocyclic compounds has not been undertaken. The present work was devoted to investigation of the stereochemical and electronic structure of the vinyl ethers of pyridine and quinoline. The PMR spectra of the samples were recorded for 5% solutions in deuterochloroform on a Tesla BS-497 spectrometer at 100 MHz. The 13 C NMR spectra were recorded on a Tesla BS-567A spectrometer at 25.1 MHz in deuterochloroform with the samples at concentrations of 30%. The internal standard was HMDS. The vinyl ethers of pyridine and quinoline exist preferentially in the nonplanar S-trans conformation. In the vinyl esters of pyridine and quinoline the p-π conjugation is concurrent in nature and depends on the position of the vinyloxy group in the heterocycle

On the behaviour of biradicaloid [P(μ-NTer)]2 towards Lewis acids and bases.

Science.gov (United States)

Hinz, Alexander; Schulz, Axel; Villinger, Alexander

2016-05-07

The well-known diphosphadiazane-1,3-diyl [P(μ-NTer)]2 (Ter = 2,6-bis(2,4,6-trimethyl-phenyl)-phenyl) was treated with Lewis bases such as N-heterocyclic carbenes and Lewis acids e.g. gold(i) chloride complexes. In the reaction with the Lewis base, fragmentation of the P2N2 framework was observed, yielding a salt of the type [(NHC)2P](+)[(TerN)2P](-) in a clean reaction. The reaction of [P(μ-NTer)]2 with gold(i) chloride afforded 1 : 1 and 1 : 2 complexes. The dinuclear complex [(ClAu)2P(μ-NTer)2P] displays a bridging P atom between both gold centers, as has been observed for P based zwitterions.

Quantum mechanical and spectroscopic (FT-IR, 13C, 1H NMR and UV) investigations of 2-(5-(4-Chlorophenyl)-3-(pyridin-2-yl)-4,5-dihydropyrazol-1-yl)benzo[d]thiazole by DFT method

Science.gov (United States)

Diwaker

2014-07-01

The electronic, NMR, vibrational, structural properties of a new pyrazoline derivative: 2-(5-(4-Chlorophenyl)-3-(pyridine-2-yl)-4,5-dihydropyrazol-1-yl)benzo[d]thiazole has been studied using Gaussian 09 software package. Using VEDA 4 program we have reported the PED potential energy distribution of normal mode of vibrations of the title compound. We have also reported the 1H and 13C NMR chemical shifts of the title compound using B3LYP level of theory with 6-311++G(2d,2p) basis set. Using time dependent (TD-DFT) approach electronic properties such as HOMO and LUMO energies, electronic spectrum of the title compound has been studied and reported. NBO analysis and MEP surface mapping has also been calculated and reported using ab initio methods.

Thermal and oxidative degradation studies of formulated C-ethers by gel-permeation chromatography

Science.gov (United States)

Jones, W. R., Jr.; Morales, W.

1982-01-01

Gel-permeation chromatography was used to analyze C-ether lubricant formulations from high-temperature bearing tests and from micro-oxidation tests. Three mu-styragel columns (one 500 and two 100 A) and a tetrahydrofuran mobile phase were found to adequately separate the C-ether degradation products. The micro-oxidation tests yielded degradation results qualitatively similar to those observed from the bearing tests. Micro-oxidation tests conducted in air yielded more degradation than did tests in nitrogen. No great differences were observed between the thermal-oxidative stabilities of the two C-ether formulations or between the catalytic degradation activities of silver and M-50 steel. C-ether formulation I did yield more degradation than did formulation II in 111- and 25-hour bearing tests, respectively.

Investigation of synthesis, thermal properties and curing kinetics of fluorene diamine-based benzoxazine by using two curing kinetic methods

International Nuclear Information System (INIS)

He, Xuan-yu; Wang, Jun; Ramdani, Noureddine; Liu, Wen-bin; Liu, Li-jia; Yang, Lei

2013-01-01

Graphical abstract: - Highlights: • A novel diamine-based benzoxazine monomer containing aryl ether and bulky fluorene groups (BEF-p) is synthesized. • Kinetic parameters can be calculated by Starink-LSR method and direct LSR method. • Cure reaction could be successfully described with the autocatalytic model. • The poly(BEF-p) exhibits high T g and superior thermal stability. • Aryl ether linkages had little influence on the thermal stability. - Abstract: A novel diamine-based benzoxazine monomer containing aryl ether and bulky fluorene groups (BEF-p) was prepared from the reaction of 9,9-bis-[4-(p-aminophenoxy)-phenyl]fluorene with paraformaldehyde and phenol. The chemical structure of monomer was confirmed by Fourier-transform infrared (FTIR) and 1 H and 13 C nuclear magnetic resonance spectroscopy ( 1 H and 13 C NMR). The polymerization behavior of monomer was analyzed by differential scanning calorimetry (DSC) and FTIR. The curing kinetics was studied by non-isothermal DSC, and the kinetic parameters were determined. The autocatalytic model based on two kinetic methods (Starink-LSR method and direct LSR method) showed good agreement with experimental results. The thermal and mechanical properties of poly(BEF-p) were evaluated with DSC, dynamic mechanical thermal analysis (DMTA), and thermogravimetric analysis (TGA). The results showed that the cured polymer exhibited higher glass transition temperature (T g ) and better thermal stability compared with diaminodiphenylmethane-based benzoxazine(P-ddm), and was slightly lower than those of fluorene diamine-phenol-based polybenzoxazine (poly(BF-p))

UV-visible spectrum of the phenyl radical and kinetics of its reaction with NO in the gas phase

DEFF Research Database (Denmark)

Wallington, T.J.; Egsgaard, H.; Nielsen, O.J.

1998-01-01

Pulse radiolysis transient UV-visible absorption spectroscopy was used to study the UV-visible absorption spectrum (225-575 nm) of the phenyl radical, C6H5(.), and kinetics of its reaction with NO. Phenyl radicals have a strong broad featureless absorption in the region of 225-340 nm...

Direct dimethyl ether fueling of a high temperature polymer fuel cell

DEFF Research Database (Denmark)

Jensen, Jens Oluf; Vassiliev, Anton; Olsen, M.I.

2012-01-01

Direct dimethyl ether (DME) fuel cells suffer from poor DME–water miscibility and so far peak powers of only 20–40 mW cm−2 have been reported. Based on available literature on solubility of dimethyl ether (DME) in water at ambient pressure it was estimated that the maximum concentration of DME at...

Synthesis of Novel Bibrachial Lariat Ethers (BiBLEs) Containing [1,2 ...

African Journals Online (AJOL)

NICO

A practical and regioselective method for the synthesis of cis-diastereomers of bibrachial lariat ethers (BiBLEs) bearing ester and amide groups is reported. The novel bibrachial lariat ethers (BiBLEs) 3a–d with neutral side chains were prepared by reaction of the corresponding aza-crown macrocycles 1a–b with ethyl ...

Absorption and translocation of polybrominated diphenyl ethers (PBDEs) by plants from contaminated sewage sludge

Czech Academy of Sciences Publication Activity Database

Vrkoslavová, J.; Demnerová, K.; Macková, M.; Zemanová, T.; Macek, Tomáš; Hajšlová, J.; Pulkrabová, J.; Hrádková, P.; Stiborová, H.

2010-01-01

Roč. 81, č. 3 (2010), s. 381-386 ISSN 0045-6535 R&D Projects: GA MŠk 2B06151 Grant - others:GA ČR(CZ) GP104/08/P188 Institutional research plan: CEZ:AV0Z40550506 Keywords : polybrominated diphenyl ethers * contaminated sewage sludge * plant uptake * bioconcentration factors * Nicotiana tabacum Subject RIV: EI - Biotechnology ; Bionics Impact factor: 3.155, year: 2010

Isothermal (vapor + liquid) equilibria and excess enthalpy data of {1-hexene + methyl butyl ether (MBE)} and {1-hexene + methyl tert-butyl ether (MTBE)} binary systems at several temperatures

International Nuclear Information System (INIS)

Hani, Rachida; Solimando, Roland; Negadi, Latifa; Jose, Jacques; Ait Kaci, Ahmed

2012-01-01

Highlights: ► Vapor pressures of (1-hexene + methyl butyl ether) or (1-hexene + methyl tert-butyl ether) are reported between (263 and 363) K. ► The two mixtures exhibit positive G E . ► Additionally, molar excess enthalpies, H E , for the two binary systems have been measured at 303.15. - Abstract: The vapor pressures of {1-hexene + methyl butyl ether (MBE)} and {1-hexene + methyl tert-butyl ether (MTBE)} binary mixtures and of the three pure components were measured by means of a static device at temperatures between (263 and 333) K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions were calculated for several constant temperatures and fitted to a third-order Redlich–Kister equation using the Barker’s method. Additionally, molar excess enthalpies, H E , for the two binary systems have been measured at 303.15 K using an isothermal flow calorimeter.

Children's exposure to polybrominated diphenyl ethers.

NARCIS (Netherlands)

Zuurbier, M.; Leijs, M.; Schoeters, G.; Tusscher, G. Ten; Koppe, J.G.

2006-01-01

Background: Polybrominated biphenyl ethers (PBDEs), a class of brominated flame retardants, are frequently used in consumer products. PBDEs levels in environmental and human samples have increased in recent decades. Children are exposed to PBDEs through diet, mainly through fish, meat and milk.

p,p'-DDE Induces Gonadal Intersex in Japanese Medaka (Oryzias latipes) at Environmentally Relevant Concentrations: Comparison with o,p'-DDT.

Science.gov (United States)

Sun, Jianxian; Wang, Chen; Peng, Hui; Zheng, Guomao; Zhang, Shiyi; Hu, Jianying

2016-01-05

Previous studies have reported high body burdens of dichlorodiphenyltrichloroethane (DDT) and its metabolites in wild fishes worldwide. This study evaluated the adverse effects of 1,1-dichloro-2,2-bis (p-chlorophenyl)-ethylene (p,p'-DDE) and o,p'-DDT on gonadal development and reproduction by exposing transgenic Japanese medaka (Oryzias latipes) from hatch for 100 days. While both p,p'-DDE and o,p'-DDT induced intersex in male medaka, the lowest observable effective concentration (LOEC) of o,p'-DDT was 57.7 ng/g ww, about 5-fold lower than that (272 ng/g ww) of p,p'-DDE. Since LOECs of both chemicals were comparable to the body concentrations in wild fish, DDT contamination would likely contribute to the occurrence of intersex observed in wild fish. Exposure to o,p'-DDT resulted in much higher expression of vitellogenin in liver of males than p,p'-DDE, accordant with the higher potency of o,p'-DDT than p,p'-DDE to induce intersex. This phenomenon could be partly explained by the significantly elevated levels of 17β-estradiol in plasma of males exposed to o,p'-DDT, in addition to its estrogenic activity via the estrogen receptor. Significantly lower fertilization (p = 0.006) and hatchability (p = 0.019) were observed in the 13 intersex males. This study for the first time demonstrated the induction of intersex and reproductive effects of p,p'-DDE and o,p'-DDT at environmentally relevant concentrations.

Synthesis of 3-(4, 5-dihydro-1-phenyl-5-substituted phenyl-1H-pyrazol-3-yl-2H-chromen-2-one derivatives and evaluation of their anticancer activity

Directory of Open Access Journals (Sweden)

Nitin Kumar

2017-05-01

Full Text Available A novel series of 3-(4, 5-dihydro-1-phenyl-5-substituted phenyl-1H-pyrazol-3-yl-2H-chromen-2-one derivatives were synthesized. In the first step salicylaldehyde was reacted with ethylacetoacetate at room temperature by stirring which gives compound (I. Compound (I when refluxed with substituted benzaldehyde and diethylamine in the presence of n-butanol for 4–5 h gives substituted derivatives (IIa–d. Compounds synthesized in step 2 when refluxed with phenyl hydrazine in the presence of pyridine for 6–7 h gives the title compounds (IIIa–d. All the synthesized compounds were sent to NCI for anticancer activity. Synthesized compounds were tested for anticancer activity against 60 different cell lines. From the data thus obtained it was observed that simple coumarin ring derivatives were more effective in inhibiting the growth of cancerous cell lines, than coumarin-pyrazoline derivatives. Among all the synthesized compounds, irrespective of compounds having simple coumarin ring and coumarin-pyrazoline combination, compounds IIa–c, IIIb and IIId were potent anticancer agents. Compounds were active for the single dose therapeutic program at the dose of 1.00E-5 molar concentration. The main anti cancer activity is assumed to be due to the presence of the lactone structure in coumarin moiety.

Partial molar volumes of organic solutes in water. XXVI. 15-Crown-5 and 18-crown-6 ethers at temperatures (298 to 573) K and pressures up to 30 MPa

International Nuclear Information System (INIS)

Cibulka, Ivan

2015-01-01

Highlights: • Density data were obtained in the range T from (298 to 573) K and p up to 30 MPa. • Standard molar volumes of two crown ethers in water are presented. • Group contribution method was designed to estimate standard molar volumes of cyclic ethers. - Abstract: Densities of dilute aqueous solutions of two cyclic ethers, viz. 15-crown-5 and 18-crown-6, measured over the temperature range from (298 to 573) K and at pressures up to 30 MPa using an automated flow vibrating-tube densimeter are reported. Standard molar volumes were evaluated from the measured data. Present data were combined with those obtained previously for several cyclic ethers and predictions of standard molar volumes based on group contribution approach were tested and analysed

Controlled switching of single-molecule junctions by mechanical motion of a phenyl ring

Directory of Open Access Journals (Sweden)

Yuya Kitaguchi

2015-10-01

Full Text Available Mechanical methods for single-molecule control have potential for wide application in nanodevices and machines. Here we demonstrate the operation of a single-molecule switch made functional by the motion of a phenyl ring, analogous to the lever in a conventional toggle switch. The switch can be actuated by dual triggers, either by a voltage pulse or by displacement of the electrode, and electronic manipulation of the ring by chemical substitution enables rational control of the on-state conductance. Owing to its simple mechanics, structural robustness, and chemical accessibility, we propose that phenyl rings are promising components in mechanical molecular devices.

Mechanical properties and chemical stability of pivalolactone-based poly(ether ester)s

NARCIS (Netherlands)

Tijsma, E.J.; Tijsma, E.J.; van der Does, L.; Bantjes, A.; Bantjes, A.; Vulic, I.

1994-01-01

The processing, mechanical and chemical properties of poly(ether ester)s, prepared from pivalolactone (PVL), 1,4-butanediol (4G) and dimethyl terephthalate (DMT), were studied. The poly(ether ester)s could easily be processed by injection moulding, owing to their favourable rheological and thermal

1-[(Oxiran-2-ylmethyl]-3-phenyl-1,2-dihydroquinoxalin-2-one

Directory of Open Access Journals (Sweden)

Nadeem Abad

2018-04-01

Full Text Available The asymmetric unit of the title compound, C17H14N2O2, consists of two independent molecules differing mainly in the orientations of the phenyl and oxirane substituents. In the first molecule, the dihedral angle between the dihydroquinoxaline ring system and phenyl ring is 28.4 (2° and the N—C—C—O torsion angle is 87.8 (5°; corresponding data for the second molecule are 23.1 (2 and −85.6 (5°, respectively. In the crystal, offset π-stacking interactions between the dihydroquinoxaline moieties form oblique stacks, which are connected into layers parallel to the bc plane by C—H...O hydrogen bonds and C—H...π(ring interactions. Additional C—H...π(ring interactions tie the layers together. The model was refined as a two-component twin.

Solvent Effects on Cesium Complexation with Crown Ethers from Liquid to Supercritical Fluids

International Nuclear Information System (INIS)

Wai, Chien M.; Rustenholtz, Anne; Wang, Shaofen; Lee, Su-Chen; Herman, Jamie; Porter, Richard A.

2004-01-01

Nuclear magnetic resonance (NMR) techniques were used to study crown ether-water interactions in solvents of low dielectric constants such as chloroform and carbon tetrachloride. Water forms a 1:1 complex with a number of crown ethers including 12-crown-4, 15-crown-5, 18-crown-6, dicyclohexano-18=crown-6, dicyclohexano-24-crown 8, and dibenzl-24-crown-8 in chloroform. Among these crown ethers, the 18-crown-6-H2 complex has the largest equilibrium constant (K=545) and 97% of the crown is complexed to water in chloroform. Addition of carbon tetrachloride to chloroform lowers the equilibrium constants of the crown-water complexes. The partition coefficients of crown ethers (D=crown in water/crown in solvent) between water and organic solvent also vary with solvent composition

trans-2-Phenyl-4-thiophenoxy-3,4-dihydro-2H-1-benzothiopyran

Directory of Open Access Journals (Sweden)

Rammohan Pal

2011-02-01

Full Text Available Iodine-catalyzed cyclocondensation of cinnamaldehyde and thiophenol yields rapidly trans-2-phenyl-4-thiophenoxy-3,4-dihydro-2H-1-benzothiopyran in excellent yield with very high diastereoselectivity.

17O NMR parameters of some substituted benzyl ethers components: Ab initio study

Directory of Open Access Journals (Sweden)

Mahdi Rezaei Sameti

2016-09-01

Full Text Available The 17O NMR chemical shielding tensors and chemical shift for a set of substituted benzyl ethers derivatives containing (methyl, ethyl, isopropyl, t-butyl, brome and lithium have been calculated. The molecular structures were fully optimized using B3LYP/6-31G(d,p. The calculation of the 17O shielding tensors employed the GAUSSIAN 98 implementation of the gauge-including atomic orbital (GIAO and continuous set of gauge transformations (CSGT by using 6-31G (d,p, 6-31++G(d,p and 6-311++G(d,p basis set methods at density functional levels of theories (DFT. The values determined using the GIAO and CSGT were found to give a good agreement with the experimental chemical shielding.

Dichlorodiphenyltrichloroethane (DDT), DDT Metabolites and Pregnancy Outcomes

Science.gov (United States)

Kezios, Katrina L.; Liu, Xinhua; Cirillo, Piera M.; Cohn, Barbara A.; Kalantzi, Olga I.; Wang, Yunzhu; Petreas, Myrto X.; Park, June-Soo; Factor-Litvak, Pam

2012-01-01

Organochlorine pesticides (OCPs) are persistent endocrine disruptors. OCPs cross the placenta; this prenatal exposure has been associated with adverse pregnancy outcomes. We investigated associations between prenatal exposure to OCPs and gestational age and birth weight in 600 infants born between 1960 and 1963. The primary OCP was 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p′-DDT), its primary metabolite, 1,1′-dichloro-2,2'-bis(p-chlorophenyl)ethylene(p,p′-DDE) and the contaminant, 1,1,1-trichloro-2-(p-chlorophenyl)-2-(o-chlorophenyl)-ethane (o,p′-DDT). Regression analysis indicated that for each natural log unit increase in p,p′-DDT, birth weight increased by 274 grams (95% CI 122, 425) when controlling for p,p′-DDE and o,p′-DDT. At a given level of p,p′-DDT exposure, o,p′-DDT and p,p′-DDE were associated with decreased birth weight. p,p′-DDE was negatively associated with length of gestation, controlling for p,p′-DDT and o,p′-DDT. These findings suggest opposing associations between exposure to p,p′-DDT and p,p′-DDE and birth weight. We did not find evidence to support mediation by maternal thyroid hormone status nor that the association differed by sex. PMID:23142753

Synthesis of New Unsymmetrical 4,5-Dihydroxy-2-imidazolidinones. Dynamic NMR Spectroscopic Study of the Prototropic Tautomerism in 1-(2-Benzimidazolyl-3-phenyl-4,5-dihydroxy-2-imidazolidinone

Directory of Open Access Journals (Sweden)

Farshid Salimi

2006-10-01

Full Text Available The acid-catalyzed cyclocondensation in refluxing acetonitrile of aqueousglyoxal with N-heteroaryl-N'-phenylureas 4a-f (heteroaryl = 2-thiazolyl, 2-pyrimidinyl,2-pyrazinyl, 2-pyridinyl, 3-pyridinyl and 2-benzimidazolyl led to the formation of thecorresponding 1-heteroaryl-3-phenyl-4,5-dihydroxy-2-imidazolidinones 5a-f. All theproducts were characterized by elemental and spectroscopic analyses. The free-energybarrier (∆GP≠ for prototropic tautomerism in 1-(2-benzimidazolyl-3-phenyl-4,5-dihydroxy-2-imidazolidinone (5f was determined by dynamic NMR studies to be 81 ± 2KJ molP-1

NMR study of conjugation effects. 15. /sup 13/C-/sup 13/C spin-spin coupling constants in phenylalkyl ether

Energy Technology Data Exchange (ETDEWEB)

Kalabin, G.A. (Siberian Branch of the Academy of Sciences of the USSR); Krivdin, L.B.; Trofimov, B.A.

1982-07-20

In order to elucidate the /sup 13/C-/sup 13/-C SSCC (spin-spin coupling constants) segment with the electronic excitations induced by the R group, a series of phenyl alkyl ethers, PhOAlk, where Alk = Me(I), Et(II), i-Pr(III), and t-Bu(IV), were studied. This series was chosen because in studying the /sup 13/C CS in monosubstituted benzenes it was observed that the intensity of the ..pi..-electron interaction of the unshared electron pairs of oxygen with the ..pi.. system of the benzene ring was practically the same in some compounds, but increased by 30% in others. This is related to the fact that the latter is characterized by an average noncoplanar conformation, with a dihedral angle between the benzene-ring plane and the C-O-C bond of approx. 45/sup 0/, whereas some compounds have an angle < 20/sup 0/. The reason for the difference is significant steric interaction of the alkyl hydrogens with the o-position of the ring. Thus, consideration of the /sup 13/C-/sup 13/C SSCC of a series of quite similar compounds, especially when compared to the whole set of such SSCC for other monosubstituted benzenes, shows that their relationship to the structure of the substituent R is extremely complex.

The crystal structure of 6-(4-chlorophenyl-2-(4-methylbenzylimidazo[2,1-b][1,3,4]thiadiazole-5-carbaldehyde

Directory of Open Access Journals (Sweden)

A. Sowmya

2016-10-01

Full Text Available In the title imidazo[2,1-b][1,3,4]thiadiazole derivative, C19H14ClN3OS, the 4-methylbenzyl and chlorophenyl rings are inclined to the planar imidazo[2,1-b][1,3,4]thiadiazole moiety (r.m.s. deviation = 0.012 Å by 64.5 (1 and 3.7 (1°, respectively. The molecular structure is primarily stabilized by a strong intramolecular C—H...O hydrogen bond, leading to the formation of a pseudo-seven-membered S(7 ring motif, and a short intramolecular C—H...N contact forming an S(5 ring motif. In the crystal, molecules are linked by pairs of C—H...S hydrogen bonds, forming inversion dimers. The dimers are linked by C—H...O and C—H...π interactions, forming chains propagating along [110].

3,5-Bis(4-meth­oxy­phen­yl)-1-phenyl-4,5-dihydro-1H-pyrazole

Science.gov (United States)

Baktır, Zeliha; Akkurt, Mehmet; Samshuddin, S.; Narayana, B.; Yathirajan, H. S.

2011-01-01

In the title compound, C23H22N2O2, the central pyrazole ring is nearly planar (r.m.s. deviation = 0.046 Å) and it makes a dihedral angle of 18.5 (2)° with the phenyl ring. The dihedral angles between the phenyl and the two meth­oxy-substituted phenyl rings are 26.2 (2) and 80.6 (2)°. The crystal structure is stabilized by C—H⋯π stacking inter­actions and weak π–π inter­actions [centriod–centroid distance = 3.891 (2) Å]. PMID:21523013

Radiation-induced glycoside bond breaking in cellulose methyl ethers

International Nuclear Information System (INIS)

Petryaev, E.P.; Boltromeyuk, V.V.; Kovalenko, N.I.; Shadyro, O.I.

1988-01-01

Radiation-induced destruction of cellulose methyl ethers of different degree of esterification in aqueous solutions with and without acceptors: (N 2 O, O 2 , H 2 O + , Co(2), Cu(2)) is investigated. It is established that OH radicals make main contribution into radiolytic transformations of cellulose ethers in aqueous solutions. Reactions of radicals with free valency on carbon atoms containing secondary nonsubstituted hydroxyl groups lead also to glycoside bond breaking besides the reaction of β-fragmentation and hydrolysis of radicals with an unpaired electron localized near C 1 , C 4 , C 5 aroms

The evaluation of acute toxicity, antimicrobial activity of 1-phenyl-5-p-tolyl-1H-1, 2, 3-triazole, and binding to human serum albumin.

Science.gov (United States)

Duan, Hong-Ye; Li, Jian-Ling; Wu, Lu-Yong; Shu, Huo-Ming; Chen, Yu-Xue; Ding, Guo-Hua; Dong, Run-Cong; Si, Hong-Zong; Zhong, Xia; He, Wen-Ying

2017-11-01

1-Phenyl-5-p-tolyl-1H-1, 2, 3-triazole (PPTA) was a synthesized compound. The result of acute toxicities to mice of PPTA by intragastric administration indicated that PPTA did not produce any significant acute toxic effect on Kunming strain mice. It exhibited the various potent inhibitory activities against two kinds of bananas pathogenic bacteria, black sigatoka and freckle, when compared with that of control drugs and the inhibitory rates were up to 64.14% and 43.46%, respectively, with the same concentration of 7.06 mM. The interaction of PPTA with human serum albumin (HSA) was studied using fluorescence polarization, absorption spectra, 3D fluorescence, and synchronous spectra in combination with quantum chemistry and molecular modeling. Multiple modes of interaction between PPTA and HSA were suggested to stabilize the PPTA-HSA complex, based on thermodynamic data and molecular modeling. Binding of PPTA to HSA induced perturbation in the microenvironment around HSA as well as secondary structural changes in the protein. © 2017 Wiley Periodicals, Inc.

Comparative evaluation of labelling patterns and turnover of lipids, tagged by 15 (p-/sup 123/I-phenyl-)pentadecanoic and 1-/sup 14/C-palmitic acid

Energy Technology Data Exchange (ETDEWEB)

Reske, S.N.; Sauer, W.; Reichmann, K.; Winkler, C. (Bonn Univ. (Germany, F.R.). Inst. fuer Klinische und Experimentelle Nuklearmedizin); Machulla, H.J.; Knust, E.J. (Essen Univ. (Germany, F.R.). Inst. fuer Medizinische Strahlenphysik und Strahlenbiologie)

1984-06-15

Uptake and turnover of chloroform/methanol extractable tissue lipids labelled in vivo simultaneously with 15(p-/sup 123/I-phenyl-)pentadecanoic and 1-/sup 14/C-palmitic acid were compared. Lipid turnover studies were performed in fasted pentobarbital-anaesthetized Wistar rats in tissues with highly varying free fatty acid turnover rates. In all tissues investigated, i.e. heart, lung, liver, spleen and kidney, both tracers labelled nearly identical lipid fractions. The main tracer uptake was found in free fatty acids, phospholipids, diglycerides and triglycerides. A highly significant correlation of uptake and turnover in main tissue lipid fractions indicated an essentially identical metabolic pathway of both tracers in intermediary tissue lipid metabolism. Concordant tracer uptake and turnover patterns in tissue of lipids with highly varying fatty acid metabolic rates suggested that intrinsic metabolic activity of the tissue and respective lipid fraction was the major determinant of metabolic handling of both iodophenyl fatty- and palmitic acid. Thus, the feasibility of iodophenylpentadecanoic acid as free fatty acid tracer for studying tissue lipid metabolism is demonstrated. 21 refs.

Syntheses, experimental and theoretical studies on absorption/emission properties of pyrazoline-containing aryl/methoxy naphthyl substituents

Energy Technology Data Exchange (ETDEWEB)

Trilleras, Jorge; González-López, Edwin; León-Jaramillo, Jhair; Pérez-Gamboa, Alfredo; Puello-Polo, Esneyder, E-mail: jorgetrilleras@mail.uniatlantico.edu.co [Universidad del Atlántico (Colombia); Romo, Pablo; Ortíz, Alejandro; Quiroga, Jairo [Centre for Bioinformatics and Photonics, Cali (Colombia)

2018-05-01

5-Aryl-3-(2-methoxynaphthalen-6-yl)-1-phenylpyrazoline derivatives were synthesized starting from (E)-1-(3-aryl)-(2-methoxynaphthalen-6-yl)-prop-2-en-1-one and phenylhydrazine. The compounds were characterized by {sup 1} H and {sup 13}C nuclear magnetic resonance (NMR), elemental analyses and mass spectrometry. Some compounds showed promising luminescence properties in solution and in solid state; the absorption and emission characteristics were measured and the fluorescence quantum yield of two of the derivatives [4,5-dihydro-3-(2-methoxynaphthalen6-yl)-5-(3,4,5-trimethoxyphenyl)-1- phenyl-1H-pyrazoline and 5-(4-chlorophenyl)-4,5-dihydro3-(2-methoxynaphthalen-6-yl)-1-phenyl-1H- pyrazoline] were found to have excellent values compared to rhodamine B standard. Theoretical calculations at time-dependent density functional theory (TD-DFT) level are in agreement with the experimental measurements and are helpful to explain the electronic behavior. (author)

Oxime Ethers of (E)-11-Isonitrosostrychnine as Highly Potent Glycine Receptor Antagonists

DEFF Research Database (Denmark)

Mohsen, Amal M Y; Mandour, Yasmine M; Sarukhanyan, Edita

2016-01-01

of the crystal structure of the α3 glycine receptor indicated the same orientation of the strychnine core for all analogues. For the most potent oxime ethers, the ether substituent was accommodated in a lipophilic receptor binding pocket. The findings identify the oxime hydroxy group as a suitable attachment...

FT-IR, FT-Raman spectra and ab initio HF and DFT calculations of 7-chloro-5-(2-chlorophenyl)-3-hydroxy-2,3-dihydro-1H-1,4-benzodiazepin-2-one.

Science.gov (United States)

Muthu, S; Prasath, M; Paulraj, E Isac; Balaji, R Arun

2014-01-01

The Fourier Transform infrared and Fourier Transform Raman spectra of 7-chloro-5 (2-chlorophenyl)-3-hydroxy-2,3-dihydro-1H-1,4-benzodiazepin-2-one (7C3D4B) were recorded in the regions 4000-400 and 4000-100 cm(-1), respectively. The appropriate theoretical spectrograms for the IR and Raman spectra of the title molecule were also constructed. The calculated results show that the predicted geometry can well reproduce the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they supported each other. Stability of the molecule arising from hyperconjugative interactions, charge delocalization and intramolecular hydrogen bond-like weak interaction has been analyzed using natural bond orbital (NBO) analysis by using B3LYP/6-31G(d,p) method. The results show that electron density (ED) in the σ* and π* antibonding orbitals and second-order delocalization energies E(2) confirm the occurrence of intramolecular charge transfer (ICT) within the molecule. The first order hyperpolarizability (βtotal) of this molecular system and related properties (β, μ, and Δα) are calculated using HF/6-31G(d,p) and B3LYP/6-31G(d,p) methods based on the finite-field approach. Copyright © 2013 Elsevier B.V. All rights reserved.

Reproductive Effects of Two Polybrominated Diphenyl Ethers on the Rotifer Brachionus plicatilis.

Science.gov (United States)

Zhang, Jing; Wang, You; Zhou, Bin; Sun, Kai-Ming; Tang, Xuexi

2016-08-01

The effects of two polybrominated diphenyl ethers (PBDEs) on the reproduction of the rotifer Brachionus plicatilis were investigated. Results showed that sexual maturation was promoted by tetra-brominated diphenyl ether-47 (BDE-47) and deca-brominated diphenyl ether-209 (BDE-209), whereas fecundity was inhibited by BDE-47, but promoted by BDE-209. Additionally, both PBDEs affected the expression of two genes, vasa and nanos mRNA, related to rotifer reproduction. This suggests a possible regulatory molecular mechanism at the transcriptional level. Our research extends the current knowledge of the ecotoxicological mechanism induced by PBDEs and provides further essential information for assessing the risks of PBDE contamination in marine ecosystems.

Amended final report on the safety assessment of PPG-40 butyl ether with an addendum to include PPG-2, -4, -5, -9, -12, -14, -15, -16, -17, -18, -20, -22, -24, -26, -30, -33, -52, and -53 butyl ethers.

Science.gov (United States)

Lanigan, R S

2001-01-01

The Polypropylene Glycol (PPG) Butyl Ethers function as skinand hair-conditioning agents in cosmetics. Intestinal absorption of the PPG Butyl Ethers was inversely proportional to the molecular weight. In general, the toxicity of the PPG Butyl Ethers decreased as the molecular weight increased. In acute studies, moderate intraperitoneal (IP) doses of various PPG Butyl Ethers caused convulsive seizures in mice and anesthetized dogs, and large oral doses caused decreased activity, anuria, renal tubular swelling and necrosis, and hepatic swelling and necrosis. PPG-2 Butyl Ether vapors were nontoxic by the inhalation route. PPG-2 Butyl Ether was nontoxic in short-term feeding and dermal exposure studies in rats. In animal irritation studies, PPG-2 Butyl Ether caused minor, transient erythema and desquamation; in addition, erythema, edema, ecchymosis, necrosis, and other changes were observed during an acute percutaneous study. PPG-2 Butyl Ether also caused minor to moderate conjunctival irritation and minor corneal injury. PPG-2 Butyl Ether when dermally applied was nontoxic to pregnant rats and was nonteratogenic at doses up to 1.0 ml/kg/day. PPG BE800 at concentrations of 0.001% to 0.26% in feed was noncarcinogenic to rats after 2 years of treatment. In clinical studies, PPG BE800 was nonirritating and nonsensitizing to the skin when tested using 200 subjects. PPG-40 Butyl Ether was neither an irritant nor a sensitizer in a repeat-insult patch test using 112 subjects. Although clinical testing did not indicate significant skin irritation is produced by these ingredients, the animal test data did indicate the potential that these ingredients can be irritating. Therefore, it was concluded that the PPG Butyl Ethers can be used safely in cosmetic products if they are formulated to avoid irritation. Data on the component ingredients, Propylene Glycol, PPG, and n-Butyl Alcohol, from previous cosmetic ingredient safety assessments were also considered and found to support

Ether-Directed ortho-C–H Olefination with a PdII/MPAA Catalyst**

Science.gov (United States)

Li, Gang; Leow, Dasheng; Wan, Li; Yu, Jin-Quan

2013-01-01

Weak coordination is powerful! A PdII-catalyzed olefination of ortho-C–H bonds of arenes directed by weakly coordinating ethers is developed using mono-protected amino acid (MPAA) ligands. This finding provides a method for chemically modifying ethers, which are abundant in natural products and drug molecules. PMID:23239120

Photolytic degradation of polybromodiphenyl ethers under UV-lamp and solar irradiations

Energy Technology Data Exchange (ETDEWEB)

Shih, Yang-hsin, E-mail: yhs@nchu.edu.tw [Department of Soil and Environmental Sciences, National Chung Hsing University, Taichung 402, Taiwan (China); Wang, Chun-Kang [Department of Soil and Environmental Sciences, National Chung Hsing University, Taichung 402, Taiwan (China)

2009-06-15

Polybromodiphenyl ethers (PBDEs) are widely used flame retardant additives and have been mainly used in polymers for many plastic and electronic products. PBDEs have been found to bioaccumulate in both aquatic and terrestrial ecosystems and even human bodies. The technical product with the highest use is decabrominated diphenyl ether (BDE-209). Therefore, we chose to examine the solar and UV-lamp degradation of BDE-209. A linear increase of the photodegradation rate constant for BDE-209 was observed with the solar light intensity. The degradation reactions follow the pseudo-first-order kinetics. The photodegradation of BDE-209 produced other less brominated diphenyl ethers under ultraviolet light exposure, suggesting that the photodegradation of BDE-209 is a sequential dehalogenation mechanism. BDE-209 underwent rapid reductive debromination in these photodecomposition experiments. The formation rate constants of three nonabromodiphenyl ethers increase with the order of BDE-206, BDE-207 and BDE-208, indicating debromination mainly occurred at para > meta > ortho positions. These findings of the process properties and reductive debromination mechanism of the photolytic degradation of PBDEs can facilitate the design of remediation processes and also aid in predicting their fate in the environment.

Etched poly(ether ether ketone) jacket stir bar with detachable dumbbell-shaped structure for stir bar sorptive extraction.

Science.gov (United States)

Zhou, Wei; Wang, Chenlu; Wang, Xuemei; Chen, Zilin

2018-06-08

Development of stir bar sorptive extraction (SBSE) device with high stability and extraction efficiency is critical and challenging by date. In this work, etched poly(ether ether ketone) (PEEK) tube with high mechanical strength and large specific surface area was used as jacket for SBSE device. By etching with concentrated sulfuric acid, the smooth outer surface of PEEK become porous with plenty of micro holes, which was beneficial for coating of sorbents and significantly improved the extraction performance. After functionalized by bio-polydopamine method, strong hydrophobic p-naphtholbenzein molecular was immobilized onto the chemical resistant PEEK surface (PNB@E-PEEK) as stationary phase. We also firstly developed a simple detachable dumbbell-shaped structure for improving the workability of PEEK jacket stir bar. The dumbbell-shaped construction can eliminate the friction between stir bar and container, and the design of detachable structure make elution can be accomplished easier with small amount of organic solvent. It was interesting that the developed detachable dumbbell-shaped PNB@E-PEEK stir bar showed exceptional stability and extraction efficiency for SBSE enrichment of multiple analytes including several Sudan dyes, triazines, polycyclic aromatic hydrocarbons (PAHs), alkaloids and flavonoid. By coupling with high performance liquid chromatography-ultraviolet detection (HPLC-UV), PNB@E-PEEK stir bar based SBSE-HPLC-UV method was applied for the analysis of common Sudan dye pollutants. The method showed low limits of detection (0.02-0.03 ng/mL), good linearity (R 2  ≥ 0.9979) and good reproducibility (relative standard deviation ≤ 7.96%). It has been successfully applied to determine three dye pollutants in tap and lake water. Copyright © 2018 Elsevier B.V. All rights reserved.

Simple and Efficient One-Pot Synthesis, Spectroscopic Characterization and Crystal Structure of Methyl 5-(4-Chlorobenzoyloxy-1-phenyl-1H-pyrazole-3-carboxylate

Directory of Open Access Journals (Sweden)

Imtiaz Khan

2012-07-01

Full Text Available A facile one-pot synthesis of methyl 5-(4-chlorobenzoyloxy-1-phenyl-1H-pyrazole-3-carboxylate (4 is described. The title compound was efficiently synthesized by the reaction of phenyl hydrazine, dimethyl acetylenedicarboxylate and 4-chlorobenzoyl chloride in dichloromethane under reflux in good yield. The structure of the target compound was deduced by modern spectroscopic and analytical techniques and unequivocally confirmed by a single crystal X-ray diffraction analysis. The crystal of the title compound belongs to orthorhombic system, space group P 21 21 21 with cell parameters a = 6.6491(3 Å, b = 7.9627(6 Å, c = 30.621(5 Å, α = β = γ = 90° and Z = 4. The crystal packing of the compound (4 is stabilized by an offset π-stacking between the planar benzoyl-substituted diazole moieties.

Hydrolysis of strained bridgehead bicyclic vinyl ethers and sulfides

International Nuclear Information System (INIS)

Chwang, W.K.; Kresge, A.J.; Wiseman, J.R.

1979-01-01

Rates of hydrolysis of the bridgehead bicyclic vinyl ether 9-oxabicyclo[3.3.1]non-1-ene(6) and its vinyl sulfide counterpart 9-thiabicyclo[3.3.1]non-1-ene(7), catalyzed by the hydronium ion, were measured in H 2 O and in D 2 O solution. These data give isotope effects, k/sub H//k/sub D/ = 2.4 and 1.9 respectively, which show that these reactions occur by the normal, rate-determining carbon protonation, mechanism. The vinyl ether 6 is less reactive than its olefin analogue, bicyclo[3.3.1]non-1-ene (relative rate 1:1/1400), as may have been expected for a constrained bicyclic system such as this, where stabilization of the bridgehead carbocation intermediate by conjugation with oxygen is severely impaired. The vinyl sulfide 7, however, is even less reactive than the vinyl ether (relative rates 1:1/140); this is a remarkable result in view of the fact that conjugation between the sulfur atom and the cationic center is presumably also strongly inhibited. 1 figure, 3 tables

[Visualisation methods for etheric formative forces].

Science.gov (United States)

Burkhard, B; Kittel, R

2009-09-01

Rudolf Steiner, the founder of anthroposophy, suggested the development of visualisation methods for "etheric formative forces". The essential methods, their "spiritual scientific" basis and indications are described and their claims critically tested. The methods are not validated, the key criteria for diagnostic tests (reproducibility, sensitivity, specifity) are not given.

Biosynthesis of ether-phospholipids including plasmalogens, peroxisomes and human disease: new insights into an old problem

NARCIS (Netherlands)

Wanders, Ronald J. A.; Brites, Pedro

2010-01-01

Ether-phospholipids represent an important subclass of phospholipids in animal cell membranes characterized by the presence of an ether bond at the sn-I position and the enrichment of PUFAs at the sn-2 position. Of the different ether-phospholipids, plasmalogens are the most abundant form and their

Simultaneous determination of triacetin, acetic ether, butyl acetate and amorolfine hydrochloride in amorolfine liniment by HPLC.

Science.gov (United States)

Gao, Yuan; Li, Li; Zhang, Jianjun; Shu, Wenjuan; Gao, Liqiong

2012-04-01

A simple, rapid, specific and precise reversed-phase high-performance liquid chromatographic method was developed for simultaneous estimation of triacetin, acetic ether, butyl acetate and amorolfine in marketed pharmaceutical liniment. Chromatographic separation was performed on a Shimadzu VP-ODS C(18) column using the mixture of citric acid-hydrochloric acid-sodium hydrate buffer (pH 3.0), acetonitrile and methanol (32:30:38) as the mobile phase at a flow rate of 1.0 mL/min with UV-detection at 215 nm. The method separated the four components simultaneously in less than 10 min. The validation of the method was performed with respect to specificity, linearity, accuracy, and precision. The calibration curves were linear in the range of 35.1-81.9 μ/mL for triacetin, 431.1-1005.9 μ/mL for acetic ether, 167.0-389.7 μ/mL for butyl acetate and 151.0-352.3 μ/mL for amorolfine. The mean 100% spiked recovery for triacetin, acetic ether, butyl acetate and amorolfine is 99.43 ± 0.42, 101.5 ± 1.09, 101.4 ± 1.02 and 100.8 ± 0.69, respectively. The intra-day and inter-day relative standard deviation values were liniment.

Electrical and optical modeling of poly(3-hexylthiophene):[6,6]-phenyl-C61 butyric acid methyl ester P3HT-PCBM bulk heterojunction solar cells

Science.gov (United States)

Brioua, Fathi; Remram, Mohamed; Nechache, Riad; Bourouina, Hicham

2017-11-01

In this work, we investigate a two-dimensional theoretical model for the photon conversion through an integration of the optical and electrical part of multilayer system in a bulk heterojunction solar cell based on poly(3-hexylthiophene) (P3HT)/6,6-phenyl C61-butyric acid methyl ester (PCBM) blend. The optical properties of the studied structure ITO/PEDOT:PSS/P3HT:PCBM/Ca/Al, such as the exciton generation rate and the electrical field distribution, are predicted at vicinity of the active layer and have been used to solve Poisson and continuity, drift-diffusion equations of the electrical model which characterize the electrical behavior of semiconductor device using finite element method (FEM). The electrical parameters such as power conversion efficiency (PCE), open voltage circuit ( V oc), short-circuit current density ( J sc) and fill factor (FF) are extracted from the current-voltage (J-V) characteristics under illumination and in dark conditions. Highest external quantum efficiency (IPCE), up to 60%, is obtained around 520 nm, while a power conversion efficiency (PCE) value of 3.62% is found to be in good agreement with the literature results. Integration of such theoretical approach into technological applications dealing with optoelectrical material performance will rapidly provide to the user accurate data outputs required for efficient validation of proof-of-concepts.

Novel organic dyes based on phenyl-substituted benzimidazole for dye sensitized solar cells

Energy Technology Data Exchange (ETDEWEB)

Saltan, Gözde Murat [Department of Chemistry, Faculty of Arts and Science, Celal Bayar University, Yunus Emre, 45140 Manisa (Turkey); Dinçalp, Haluk, E-mail: haluk.dincalp@cbu.edu.tr [Department of Chemistry, Faculty of Arts and Science, Celal Bayar University, Yunus Emre, 45140 Manisa (Turkey); Kıran, Merve; Zafer, Ceylan [Solar Energy Institute, Ege University, Bornova, 35100 Izmir (Turkey); Erbaş, Seçil Çelik [Celal Bayar University, Materials Engineering Department, Faculty of Engineering, Yunus Emre, 45140 Manisa (Turkey)

2015-08-01

Two new sensitizers derived from benzimidazole core for dye-sensitized solar cell (DSSC) applications were designed and synthesized as D–π–A structures, in which two phenyl-substituted benzimidazole group, a phenyl ring and a cyanoacrylic acid were used as the electron donor, π-conjugated linkage and the electron acceptor, respectively. Effect of methoxy- and N,N-dimetylamino- moieties attached to the phenyl groups of benzimidazole were investigated by means of optical and photovoltaic measurements. The compounds exhibit broad absorption maximum at 387 nm with the tail extending up to 500 nm on TiO{sub 2}-coated thin film. The longer wavelength absorption band around 360 nm and the much longer decay components could be attributed to the existence of charge transfer state of the dyes in solutions. DSSC device fabricated by using methoxy substituted dye (BI5a) as a sensitizer shows much better incident photon-to-current conversion efficiency (IPCE) of 64% giving cell efficiency of 2.68%. - Graphical abstract: Display Omitted - Highlights: • Long decay times suggest the delayed fluorescence caused by the existence of ICT. • The best solar energy conversion efficiency was obtained for BI5a dye (2.68%). • More fluorescent BI5a dye gives higher photocurrent generation.

Novel organic dyes based on phenyl-substituted benzimidazole for dye sensitized solar cells

International Nuclear Information System (INIS)

Saltan, Gözde Murat; Dinçalp, Haluk; Kıran, Merve; Zafer, Ceylan; Erbaş, Seçil Çelik

2015-01-01

Two new sensitizers derived from benzimidazole core for dye-sensitized solar cell (DSSC) applications were designed and synthesized as D–π–A structures, in which two phenyl-substituted benzimidazole group, a phenyl ring and a cyanoacrylic acid were used as the electron donor, π-conjugated linkage and the electron acceptor, respectively. Effect of methoxy- and N,N-dimetylamino- moieties attached to the phenyl groups of benzimidazole were investigated by means of optical and photovoltaic measurements. The compounds exhibit broad absorption maximum at 387 nm with the tail extending up to 500 nm on TiO 2 -coated thin film. The longer wavelength absorption band around 360 nm and the much longer decay components could be attributed to the existence of charge transfer state of the dyes in solutions. DSSC device fabricated by using methoxy substituted dye (BI5a) as a sensitizer shows much better incident photon-to-current conversion efficiency (IPCE) of 64% giving cell efficiency of 2.68%. - Graphical abstract: Display Omitted - Highlights: • Long decay times suggest the delayed fluorescence caused by the existence of ICT. • The best solar energy conversion efficiency was obtained for BI5a dye (2.68%). • More fluorescent BI5a dye gives higher photocurrent generation

Convenient procedures for the α-metallation of vinylic ethers and thioethers

NARCIS (Netherlands)

Verkruijsse, H.D.; Brandsma, L.; Schleyer, P. von R.

1987-01-01

Ethyl vinyl ether H2C=CHOC2H5 and the analogous cyclic vinylic ethers dehydrofuran and 2,3-dihydropyran can be potassiated at −20°C in the α-position with a 1/1/1 molar mixture of BuLi, t-BuOK and TMEDA in hexane. Methyl vinyl sulfide is potassiated very smoothly by a 1/1 molar mixture of BuLi and

The surface modifications of multi-walled carbon nanotubes for multi-walled carbon nanotube/poly(ether ether ketone) composites

International Nuclear Information System (INIS)

Cao, Zongshuang; Qiu, Li; Yang, Yongzhen; Chen, Yongkang; Liu, Xuguang

2015-01-01

Graphical abstract: Multi-walled carbon nanotube/poly(ether ether ketone) (MWCNT/PEEK) composites incorporating surface modified multi-walled carbon nanotubes (MWCNTs) as fillers were fabricated in a solution blending method in order to explore the dynamic mechanical and tribological properties of MWCNT/PEEK composites systematically. It is evident that surface modifications of MWCNTs have a significant impact on dispersibility of MWCNTs in PEEK, dynamic mechanical and tribological properties of MWCNT/PEEK composites. Typically, a clear effect of surface modifications of MWCNTs on tribological properties of MWCNT/PEEK composites was observed. A significant reduction in frictional coefficient of MWCNT/PEEK composites with the MWCNTs modified with ethanolamine has been achieved and the self-lubricating film on their worn surfaces was also observed. - Highlights: • The dispersibility of surface modified MWCNTs in PEEK has been studied. • MWCNTs modified with ethanolamine have showed a good dispersion in PEEK. • Surface modifications of MWCNTs have a significant impact on both dynamic mechanical and tribological properties of MWCNT/PEEK composites. - Abstract: The effects of surface modifications of multi-walled carbon nanotubes (MWCNTs) on the morphology, dynamic mechanical and tribological properties of multi-walled carbon nanotube/poly(ether ether ketone) (MWCNT/PEEK) composites have been investigated. MWCNTs were treated with mixed acids to obtain acid-functionalized MWCNTs. Then the acid-functionalized MWCNTs were modified with ethanolamine (named e-MWCNTs). The MWCNT/PEEK composites were prepared by a solution-blending method. A more homogeneous distribution of e-MWCNTs within the composites was found with scanning electron microscopy. Dynamic mechanical analysis demonstrated a clear increase in the storage modulus of e-MWCNT/PEEK composites because of the improved interfacial adhesion strength between e-MWCNTs and PEEK. Furthermore, the presence of e

The surface modifications of multi-walled carbon nanotubes for multi-walled carbon nanotube/poly(ether ether ketone) composites

Energy Technology Data Exchange (ETDEWEB)

Cao, Zongshuang [Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); Research Center of Advanced Material Science and Technology, Taiyuan University of Technology, Taiyuan 030024 (China); Qiu, Li [Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Yang, Yongzhen, E-mail: yyztyut@126.com [Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); Research Center of Advanced Material Science and Technology, Taiyuan University of Technology, Taiyuan 030024 (China); Chen, Yongkang, E-mail: y.k.chen@herts.ac.uk [Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); University of Hertfordshire, School of Engineering and Technology, Hatfield, Hertfordshire AL10 9AB (United Kingdom); Liu, Xuguang [Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024 (China)

2015-10-30

Graphical abstract: Multi-walled carbon nanotube/poly(ether ether ketone) (MWCNT/PEEK) composites incorporating surface modified multi-walled carbon nanotubes (MWCNTs) as fillers were fabricated in a solution blending method in order to explore the dynamic mechanical and tribological properties of MWCNT/PEEK composites systematically. It is evident that surface modifications of MWCNTs have a significant impact on dispersibility of MWCNTs in PEEK, dynamic mechanical and tribological properties of MWCNT/PEEK composites. Typically, a clear effect of surface modifications of MWCNTs on tribological properties of MWCNT/PEEK composites was observed. A significant reduction in frictional coefficient of MWCNT/PEEK composites with the MWCNTs modified with ethanolamine has been achieved and the self-lubricating film on their worn surfaces was also observed. - Highlights: • The dispersibility of surface modified MWCNTs in PEEK has been studied. • MWCNTs modified with ethanolamine have showed a good dispersion in PEEK. • Surface modifications of MWCNTs have a significant impact on both dynamic mechanical and tribological properties of MWCNT/PEEK composites. - Abstract: The effects of surface modifications of multi-walled carbon nanotubes (MWCNTs) on the morphology, dynamic mechanical and tribological properties of multi-walled carbon nanotube/poly(ether ether ketone) (MWCNT/PEEK) composites have been investigated. MWCNTs were treated with mixed acids to obtain acid-functionalized MWCNTs. Then the acid-functionalized MWCNTs were modified with ethanolamine (named e-MWCNTs). The MWCNT/PEEK composites were prepared by a solution-blending method. A more homogeneous distribution of e-MWCNTs within the composites was found with scanning electron microscopy. Dynamic mechanical analysis demonstrated a clear increase in the storage modulus of e-MWCNT/PEEK composites because of the improved interfacial adhesion strength between e-MWCNTs and PEEK. Furthermore, the presence of e

Glycerol tertiary butyl ethers via etherification of glycerol with isobutene

Energy Technology Data Exchange (ETDEWEB)

Behr, A. [Dortmund Univ. (Germany). Chair of Chemical Process Development/Technical Chemistry A

2007-07-01

Glycerol and isobutene can react to a mixture of glycerol tertiary butyl ethers (GTBE) which can be used as additives for gasoline, diesel or biodiesel. This reaction was investigated in lab scale yielding a proposal for a process flow diagram containing reaction, extraction, flash and rectification units. This process has the advantages that only the suitable higher ethers are formed and that both glycerol and isobutene are fully converted. The homogeneous acid catalyst is low-priced and can be completely recycled. (orig.)

Metabolism of polybrominated diphenyl ethers and tetrabromobisphenol A by fish liver subcellular fractions in vitro.

Science.gov (United States)

Shen, Mengnan; Cheng, Jie; Wu, Ruohan; Zhang, Shenghu; Mao, Liang; Gao, Shixiang

2012-06-15

Polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA) are two major flame retardants that accumulate in fish tissues and are potentially toxic. Their debrominated and oxidated derivatives were also reported in fish tissues although the sources of theses derivatives were unidentified. Our study was to determine whether PBDEs and TBBPA could be metabolized by fish liver subcellular fractions in vitro and to identify what types of metabolites were formed. Liver microsomes and S9 fractions of crucian carp (Carassius auratus) were exposed to 4,4'-dibromodiphenyl ether (BDE 15), 2,2',4,4'-tetrabromodiphenyl ether (BDE 47) or TBBPA solutions for 4h. Exposure of liver subcellular fractions to BDE 15 resulted in the formation of bromophenol and two monohydroxylated dibromodiphenyl ether metabolites. Neither in microsomes nor in S9 studies has revealed the presence of hydroxylated metabolites with BDE 47 exposure which indicated that the oxidation reactions in vitro were hindered by the increased number of bromine substituents on the PBDEs. TBBPA underwent an oxidative cleavage near the central carbon of the molecule, which led to the production of 2,6-dibromo-4-isopropyl-phenol and three unidentified metabolites. Another metabolite of TBBPA characterized as a hexa-brominated compound with three aromatic rings was also found in the liver subcellular fractions. These results suggest that the biotransformation of BDE 15 and TBBPA in fish liver is mediated by cytochrome P450 (CYP450) enzymes, as revealed by the formation of hydroxylated metabolites and oxidative bond cleavage products. Moreover, further studies on the identification of specific CYP450 isozymes involved in the biotransformation revealed that CYP1A was the major enzyme responsible for the biotransformation of BDE 15 and TBBPA in fish liver subcellular fractions and CYP3A4 also played a major role in metabolism of TBBPA. Copyright © 2012 Elsevier B.V. All rights reserved.

Relationships between sperm DNA fragmentation, sperm apoptotic markers and serum levels of CB-153 and p,p'-DDE in European and Inuit populations

DEFF Research Database (Denmark)

Stronati, A; Manicardi, G C; Cecati, M

2006-01-01

Persistent organochlorine pollutants (POPs) are suspected to interfere with hormone activity and the normal homeostasis of spermatogenesis. We investigated the relationships between sperm DNA fragmentation, apoptotic markers identified on ejaculated spermatozoa and POP levels in the blood of 652...... adult males (200 Inuits from Greenland, 166 Swedish, 134 Polish and 152 Ukrainian). Serum levels of 2, 2', 4, 4', 5, 5'-hexachlorobiphenyl (CB-153), as a proxy of the total POP burden, and of 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethylene (p,p'-DDE), as a proxy of the total DDT exposure were determined...... neither sperm DNA fragmentation nor apoptotic sperm parameters and the large variations in POPs exposure was observed for the separate study groups. However, considering the European populations taken together, we showed that both %TUNEL positivity and Bcl-xL were related to CB-153 serum levels, whereas...

Radium separation through complexation by aqueous crown ethers and ion exchange or solvent extraction

Energy Technology Data Exchange (ETDEWEB)

Chiarizia, R.; Dietz, M.L.; Horwitz, E.P. [Argonne National Lab., IL (United States). Chemistry Div.; Burnett, W.C. [Florida State Univ., Tallahassee, FL (United States). Dept. of Oceanography

1997-11-01

The effect of three water-soluble, unsubstituted crown ethers (15-crown-5 (15C5), 18-crown-6 (18C6) and 21-crown-7 (21C7)) on the uptake of Ca, Sr, Ba and Ra cations by a sulfonic acid cation exchange resin, and on the extraction of the same cations by xylene solutions of dinonylnaphthalenesulfonic acid (HDNNS) from aqueous hydrochloric acid solutions has been investigated. The crown ethers enhance the sorption of the larger cations by the ion exchange resin, thereby improving the resin selectivity over calcium, a result of a synergistic interaction between the crown ether and the ionic functional groups of the resin. Similarly, the extraction of the larger alkaline earth cations into xylene by HDNNS is strongly synergized by the presence of the crown ethers in the aqueous phase. Promising results for intra-Group IIa cation separations have been obtained using each of the three crown ethers as the aqueous ligands and the sulfonic acid cation exchange resin. Even greater separation factors for the radium-calcium couple have been measured with the crown-ethers and HDNNS solutions in the solvent extraction mode. The application of the uptake and extraction results to the development of radium separation schemes is discussed and a possible flowchart for the determination of {sup 226}Ra/{sup 228}Ra in natural waters is presented.

Chloridobis{2-[(dimethylaminomethyl]phenyl}antimony(III

Directory of Open Access Journals (Sweden)

Marian Olaru

2009-11-01

Full Text Available In the title compound, [Sb(C9H12N2Cl], the Sb atom adopts a Ψ-trigonal-bipyramidal geometry. The two 2-[(dimethylaminomethyl]phenyl ligands are coordinated asymmetrically to the Sb atom. The carbon atoms of one of the ligands are disordered over sets of sites with equal occupancy, resulting in two conformational isomers in the crystal. The Sb—C and Sb—N distances in the ordered ligand are: 2.153 (4 and 3.326 (5 Å, respectively. The corresponding distances in the disordered ligand are: 2.103 (5/2.188 (5 and 2.454 (3 Å, respectively. The structure displays intramolecular C—H...Cl hydrogen bonding.

Antifungal Activity of Phenyl Derivative of Pyranocoumarin from Psoralea corylifolia L. Seeds by Inhibition of Acetylation Activity of Trichothecene 3-O-Acetyltransferase (Tri101

Directory of Open Access Journals (Sweden)

Sangeetha Srinivasan

2012-01-01

Full Text Available Antifungal activity of petroleum ether extract of Psoralea corylifolia L. seed, tested against Fusarium sp. namely, Fusarium oxysporum, Fusarium moniliforme, and Fusarium graminearum, was evaluated by agar well diffusion assay. The chromatographic fractionation of the extract yielded a new phenyl derivative of pyranocoumarin (PDP. The structure of the PDP was confirmed using spectroscopic characterization (GC-MS, IR, and NMR, and a molecular mass of m/z 414 [M-2H]+ with molecular formula C27H28O4 was obtained. The PDP had a potent antifungal activity with a minimum inhibitory concentration of 1 mg/mL against Fusarium sp. Molecular docking using Grid-Based Ligand Docking with Energetics (GLIDE, Schrodinger was carried out with the Tri101, trichothecene 3-O-acetyltransferase, as target protein to propose a mechanism for the antifungal activity. The ligand PDP showed bifurcated hydrogen bond interaction with active site residues at TYR 413 and a single hydrogen bond interaction at ARG 402 with a docking score −7.19 and glide energy of −45.78 kcal/mol. This indicated a strong binding of the ligand with the trichothecene 3-O-acetyltransferase, preventing as a result the acetylation of the trichothecene mycotoxin and destruction of the “self-defense mechanism” of the Fusarium sp.

[Ether Day--no laughing matter. The birth of modern anaesthesia].

Science.gov (United States)

Goerig, Michael; Wulf, Hinnerk

2013-10-01

Since centuries the first public demonstration of the anaesthetic properties of ether by William Thomas Green Morton at the Massachusetts General Hospital in Boston on October 16th 1846 is celebrated as "Ether Day" world-wide. The news of the beneficial effects, primarily disposed as a "Yankee Invention", spread over all continents quickly. This was the result of an article, published in the Boston Medical and Surgical Journal on November 18th, 1846. It is mentioning worth that this article was written when Morton had disclosed that the used "preparation", later named as "Nostrum" or "Letheon", was sulphuric ether. The important discovery later became a patent case and was overshadowed by a long lasting priority claim. Nevertheless the readers of the New England Journal of Medicine voted in a survey that this article was the most important publication in the 200 years journals history ever. © Georg Thieme Verlag Stuttgart · New York.

Designing of molecular architecture, synthesis and properties of the next generation of state-of-the-art high-performance thermoplastic fluoro-poly(ether amide)s, (6F-PEA), fluoro-poly(ether amide-imide)s (6F-PEAI), and their co-polymers

International Nuclear Information System (INIS)

Vora, Rohitkumar H.

2010-01-01

Graphical abstract: Molecular architectures of next generation of high-performance advanced heat stable thermoplastic polymer compositions of fluoro-poly(ether amide) (6F-PA) and fluoro-poly(ether amide-imide) (6F-PEAI) having di-ether diamines moieties were designed based on fluoro-polyimide (6F-PI) chemistry, and polymers were synthesized using two novel state-of-the-art 2-(3,4'-carboxy anhydrophenyl-2(4-carboxyphenyl) hexafluoropropane (6FTMA) and 2,2'-bis(4-carboxyphenyl) hexafluropropane (6F-DAc) monomers. Their copolymers: fluoro-copoly(ether amide-(ether imide))s (6F-co(PEA-PEI)), fluoro-copoly(ether amide-(ether amide-imide))s (6F-co(PEA-PEAI)) and fluoro-copoly(ether amide-imide-(ether imide))s (6F-co(PEAI-PEI)) were also designed and synthesized using 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydrides (6FDA) for the advanced aerospace, defense and industrial engineering applications. -- Abstract: A new generation of high-performance polymers for the advanced industrial, aerospace and defense engineering applications are being investigated in the academic and industrial research institutions throughout the world. Fluoro-polyimides (6F-PI) are one such sub-class of high-performance polyimide polymers. In the last 25 years a number of fluoro-polyimides have been reported but only a handful of them have been commercialized. This paper describes the 6F-polyimide chemistry-based designed molecular architectures and synthesis of two series of next generation of heat stable thermoplastic polymer compositions having di-ether diamines moieties, such as fluoro-poly(ether amide) (6F-PA) and fluoro-poly(ether amide-imide) (6F-PEAI) using the novel state-of-the-art 2-(3,4'-carboxy anhydrophenyl-2(4-carboxyphenyl) hexafluoropropane (6F-TMA) and 2,2'-bis(4-carboxyphenyl) hexafluoropropane (6F-DAc) monomers. Their co-polymers: fluoro-copoly(ether amide-(ether imide))s (6F-co(PEA-PEI)), fluoro-copoly(ether amide-(ether amide-imide))s (6F-co(PEA-PEAI)) and fluoro-copoly(ether

1-Acetyl-5-ferrocenyl-3-phenyl-2-pyrazoline

Directory of Open Access Journals (Sweden)

Orhan Büyükgüngör

2009-02-01

Full Text Available In the title compound, [Fe(C5H5(C16H15N2O], the pyrazoline ring and the phenyl ring are nearly coplanar, making a dihedral angle of 6.54 (2°, while the substituted cyclopentadienyl ring is twisted out of the pyrazoline ring plane by 81.32 (1°. The molecules in the crystal structure are held together by weak C—H...O intermolecular hydrogen bonds and two C—H...π interactions.

Enantioselectivity of a recombinant epoxide hydrolase from Agrobacterium radiobacter

NARCIS (Netherlands)

Lutje Spelberg, Jeffrey H.; Rink, Rick; Kellogg, Richard M.; Janssen, Dick B.

1998-01-01

The recombinant epoxide hydrolase from Agrobacterium radiobacter AD1 was used to obtain enantiomerically pure epoxides by means of a kinetic resolution. Epoxides such as styrene oxide and various derivatives thereof and phenyl glycidyl ether were obtained in high enantiomeric excess and in

Design, Synthesis and Insecticidal Activities of Novel Phenyl Substituted Isoxazolecarboxamides

Institute of Scientific and Technical Information of China (English)

LIU Peng-fei; ZHANG Ji-feng; YAN Tao; XIONG Li-xia; LI Zheng-ming

2012-01-01

Thirteen novel phenyl substituted isoxazolecarboxamides were synthesized,and their structures were characterized by 1H NMR,elementary analysis and high-resolution mass spectrometry(HRMS) techniques.Their evaluated insecticidal activities against oriental armyworm(Mythimna separata) indicate that the phcnyl substituted isoxazolecarboxamides exhibited moderate insecticidal activities,among which compounds 9c and 9k showed comparatively higher activities.

Modeling of a Reaction-Distillation-Recycle System to Produce Dimethyl Ether through Methanol Dehydration

Science.gov (United States)

Muharam, Y.; Zulkarnain, L. M.; Wirya, A. S.

2018-03-01

The increase in the dimethyl ether yield through methanol dehydration due to a recycle integration to a reaction-distillation system was studied in this research. A one-dimensional phenomenological model of a methanol dehydration reactor and a shortcut model of distillation columns were used to achieve the aim. Simulation results show that 10.7 moles/s of dimethyl ether is produced in a reaction-distillation system with the reactor length being 4 m, the reactor inlet pressure being 18 atm, the reactor inlet temperature being 533 K, the reactor inlet velocity being 0.408 m/s, and the distillation pressure being 8 atm. The methanol conversion is 90% and the dimethyl ether yield is 48%. The integration of the recycle stream to the system increases the dimethyl ether yield by 8%.

Degradation Mechanism of Poly(Ether-Urethane) Estane Induced by High Energy Radiation (III) : Radiolytic Gases and Water Soluble Products

International Nuclear Information System (INIS)

Dannoux, A.

2006-01-01

Within the framework of nuclear waste management, there is interest in the prediction of long-term behaviour of organic materials subjected to high energy radiation. Once organic waste has been stored, gases and low molecular products might be generated from materials irradiated by radionuclides. Long-term behaviour of organic material in nuclear waste has several common concerns with radiation ageing of polymers. But a more detailed description of the chemical evolution is needed for nuclear waste management. In a first approach, an extensive work on radiation ageing is used to identify the different processes encountered during the degradation of a polyurethane, including oxidation dose rate-effects and influence of dose on the oxidation mechanism. In a second approach, a study is performed to identify and quantify gases and possible production of water soluble chemical complexing agents which might enhance radionuclides migration away from the repository. In this work, we present results concerning the production of radiolytic gases and the formation of water soluble oligomers reached with leaching tests Films were made from a poly(ether-urethane) synthesized from methylene bis(p-phenyl isocyanate) (MDI) and poly(tetramethylene glycol) (PTMG) with 1,4 butanediol (BD) and were irradiated by high-energy electron beam to cover a wide doses range and by γ rays to determine the formation/consumption yields of gases. They were measured by mass spectrometry and gas-chromatography/mass spectrometry (GC/MS). The migration of water soluble oligomers in water was reached by measuring the weight loss versus leaching time. The identification of oligomers was performed by using a mass spectrometry with an electrospray ionisation interface (ESI-MS-MS). The analysis of radiolytic gases indicates the formation of H 2 , CO 2 and CO with respective radiolytic yields of 1, 0.5 and 0.3 molecule/100 eV. The consumption of O 2 is evaluated to 6 molecules/100 eV. For absorbed doses

Structural, photophysical, and theoretical studies of imidazole-based excited-state intramolecular proton transfer molecules

Science.gov (United States)

Somasundaram, Sivaraman; Kamaraj, Eswaran; Hwang, Su Jin; Park, Sanghyuk

2018-02-01

Imidazole-based excited state intramolecular proton transfer (ESIPT) blue fluorescent molecules, 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2-yl)phenol (BHPI-Cl) and 2-(1-(4-bromophenyl)-4,5-diphenyl-1H-imidazol-2-yl)phenol (BHPI-Br) were designed and synthesized by Debus-Radziszewski method through a one-pot multicomponent reaction in high yield. The synthesized compounds were fully characterized by 1H NMR, 13C NMR, FT-IR, FT-Raman, GC-Mass, and elemental analysis. The molecular structures in single crystal lattice were studied by X-ray crystallographic analysis. Because of the intramolecular hydrogen bonding, hydroxyphenyl group is planar to the central imidazole ring, while the other phenyl rings gave distorted conformations to the central heterocyclic ring. BHPI-Cl and BHPI-Br molecules showed intense ESIPT fluorescence at 480 nm, because the two twisted phenyl rings on 4- and 5-positions have reduced intermolecular interaction between adjacent molecules in each crystal through a head-to-tail packing manner. Quantum chemical calculations of energies were carried out by (TD-)DFT using B3LYP/6-31G(d, p) basis set to predict the electronic absorption spectra of the compounds, and they showed good agreement between the computational and the experimental values. The thermal analyses of the synthesized molecules were also carried out by TGA/DSC method.

40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

Science.gov (United States)

2010-07-01

... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky...

Miscibility and in vitro osteocompatibility of biodegradable blends of poly[(ethyl alanato) (p-phenyl phenoxy) phosphazene] and poly(lactic acid-glycolic acid).

Science.gov (United States)

Deng, Meng; Nair, Lakshmi S; Nukavarapu, Syam P; Kumbar, Sangamesh G; Jiang, Tao; Krogman, Nicholas R; Singh, Anurima; Allcock, Harry R; Laurencin, Cato T

2008-01-01

Previously we demonstrated the ability of ethyl glycinato substituted polyphosphazenes to neutralize the acidic degradation products and control the degradation rate of poly(lactic acid-glycolic acid) (PLAGA) by blending. In this study, blends of high strength poly[(50% ethyl alanato) (50% p-phenyl phenoxy) phosphazene] (PNEA(50)PhPh(50)) and 85:15 PLAGA were prepared using a mutual solvent approach. Three different solvents, methylene chloride (MC), chloroform (CF) and tetrahydrofuran (THF) were studied to investigate solvent effects on blend miscibility. Three different blends were then fabricated at various weight ratios namely 25:75 (BLEND25), 50:50 (BLEND50), and 75:25 (BLEND75) using THF as the mutual solvent. The miscibility of the blends was evaluated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). Among these, BLEND25 was miscible while BLEND50 and BLEND75 were partially miscible. Furthermore, BLEND25 formed apatite layers on its surface as evidenced in a biomimetic study performed. These novel blends showed cell adhesion and proliferation comparable to PLAGA. However, the PNEA(50)PhPh(50) component in the blends was able to increase the phenotypic expression and mineralized matrix synthesis of the primary rat osteoblasts (PRO) in vitro. Blends of high strength PNEA(50)PhPh(50) and 85:15 PLAGA are promising biomaterials for a variety of musculoskeletal applications.

Assessment of ether and alcohol fuels from coal. Volume 2. Technical report

Energy Technology Data Exchange (ETDEWEB)

1983-03-01

A unique route for the indirect liquefaction of coal to produce transportation fuel has been evaluated. The resultant fuel includes alkyl tertiary alkyl ethers and higher alcohols, all in the gasoline boiling range. When blended into gasoline, the ether fuel provides several advantages over the lower alcohols: (1) lower chemical oxygen content, (2) less-severe water-separation problems, and (3) reduced front-end volatility effects. The ether fuel also has high-octane quality. Further, it can be utilized as a gasoline substitute in all proportions. Production of ether fuel combines several steps, all of which are or have been practiced on an industrial scale: (1) coal gasification, (2) gas cleanup and shift to desired H/sub 2/:CO ratio, (3) conversion of synthesis gas to isobutanol, methanol, and higher alcohols, (4) separation of alcohols, (5) chemical dehydration of isobutanol to isobutylene, and (6) etherification of isobutylene with methanol. A pilot-plant investigation of the isobutanol synthesis step was performed. Estimates of ether-fuel manufacturing costs indicate this process route is significantly more costly than synthesis of methanol. However, the fuel performance features provide incentive for developing the necessary process and catalyst improvements. Co-production of higher-molecular-weight co-solvent alcohols represents a less-drastic form of methanol modification to achieve improvement in the performance of methanol-gasoline blends. Costs were estimated for producing several proportions of methanol plus higher alcohols from coal. Estimated fuel selling price increases regularly but modestly with higher alcohol content.

Ether in Kant and akasa in Prasastapada: Philosophy in comparative perspective

Directory of Open Access Journals (Sweden)

Fernando Tola

2015-02-01

Full Text Available The study of Indian and Western systems of Philosophy reveals many points of thematic and methodological coincidences between them. We have collected a good number of these coincidences in our recent books, where we have included many philosophical texts in Sanskrit and in European languages which contain the expression of astonishing similar ideas and theses. In the present article we add a new instance of coincidence between Indian and Western thought in relation to akasa in India (limited to the Indian philosophical system Vaisesika and ether (Aether or Äther in German in the Opus postumum of Kant. The inexistence of both akasa and ether has been established by Modern Science. Akasa and ether in India and the West, respectively, constitute a notorious example of asrayasiddha, the well-known logical defect considered by Indian Logic.

Selective crystallization of cations with crown ethers; Selektive Kristallisation von Kationen mit Kronenethern

Energy Technology Data Exchange (ETDEWEB)

Heffels, Dennis Egidius

2014-07-04

The aim of this work was to study the selectivity and preferences of the incorporation of differently sized cations in the cavities of various crown ethers and the characterization of the resulting compounds. The coordination preferences of crown ethers with different cavities have long been known, and the impact of other effects on the structure formation have increasingly become the focus of attention. In this work a comparative overview of the coordination preferences depending on various factors was undertaken. The focus was mainly on the variation of the cavity of the crown ether in the presence of differently sized cations. In addition, the effects of the solvent and differently coordinating anions have been investigated. Within the framework of this work, basic coordination preferences could be detected with rare earth nitrates, which are affected particularly by the choice of the solvent. The formation of different types of structures could be controlled by varying the conditions such that the incorporation of the cation in the cavity of the crown ether was influenced and the formation of a particular type of structure can be influenced partly by the choice of solvent. In this case no direct preferences for the incorporation into the cavity of the crown ether in relation to the cation size were observed for rare earth cations. However, the coordination of the crown ether leads in each case - for lanthanides - to rather high coordination numbers. A total of five new rare earth complexes and two structural variants could be observed with crown ethers. In the study of the selectivity of the incorporation into the cavity, known structures were also reproduced and further structures were characterized but the crystal structures not entirely solved. With the use of monovalent cations such as potassium, lithium or silver a total of nine new compounds could be synthesized, while no clear preferences for the incorporation of certain cations were detected. The

Pyrid-2-yl and 2-CyanoPhenyl fused heterocyclic compounds as human P2X3 inhibitors: a combined approach based on homology modelling, docking and QSAR analysis.

Science.gov (United States)

Janardhan, Sridhara; Seth, Subhendu; Viswanadhan, Vellarkad N

2014-02-01

P2X receptors are hetero-oligomeric proteins that function as membrane ion channels and are gated by extracellular ATP. The hP2X[Formula: see text] subunit is a constituent of the channels on a subset of sensory neurons involved in pain signaling, where ATP released by damaged and inflamed tissue can initiate action potentials. Hence, the inhibition of ATP-activated P2X3 receptor is an exciting approach for the treatment of inflammatory and neuropathic pain. Recently, the crystal structures of zebrafish P2X4 (zP2X4) were obtained in closed, apo state (PDB ID: 3I5D) and ATP-bound, open state (PDB ID: 4DW1). These structures were used to develop a homology model of human P2X3 (hP2X3 in order to identify through docking studies, the binding modes of known P2X3 inhibitors and their key active site interactions, along with a pharmacophore-based 3D-QSAR model for a series of 136 Pyrid-2-yl and 2-CyanoPhenyl fused heterocyclic compounds. These 3D-QSAR models have been developed with different combinations of training and test set divisions obtained by random separation, Jarvis-Patrick clustering, K-means clustering and sphere exclusion methods. The best predictive 3D-QSAR model resulted in training set R2 of 0.75, internal test set Q2 of 0.74, Pearson-R value of 0.87 and root mean square error of 0.37. The information generated by the pharmacophore model and docking analyses using the homology model provides valuable clues to design novel potent hP2X3 inhibitors.

Origin of the enhanced performance in poly(3-hexylthiophene) : [6,6]-phenyl C-61-butyric acid methyl ester solar cells upon slow drying of the active layer

NARCIS (Netherlands)

Mihailetchi, Valentin D.; Xie, Hangxing; Boer, Bert de; Popescu, Lacramioara M.; Hummelen, Jan C.; Blom, Paul W.M.; Koster, L. Jan Anton

2006-01-01

The origin of the enhanced performance of bulk heterojunction solar cells based on slowly dried films of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C-61-butyric acid methyl ester is investigated, combining charge transport measurements with numerical device simulations. Slow drying leads to a

Distribution and excretion of methyl and phenyl mercury salts

Energy Technology Data Exchange (ETDEWEB)

Gage, J C

1964-01-01

The distribution, metabolism, and excretion of phenyl mercury acetate (P.M.A.) and of methyl mercury dicyanidiamide (M.M.D.) has been studied in the rat during the repeated subcutaneous administration of small doses over a period of six weeks, and for several weeks after a single dose. The results indicate that P.M.A. is absorbed unchanged into the circulation from which it is mainly removed by the liver and kidneys where it is metabolized and excreted in the feces and urine mostly as inorganic mercury. During repeated dosage the rats reached a steady state by the end of the second week when excretion approximately balanced intake. No measurable amount of mercury was found in the central nervous system. After repeated dosage with M.M.D. there is no clear indication of a steady state being reached after six weeks. There is an accumulation of organic mercury in all tissues, particularly in the red cells, and a progressive increase in the brain concentration. M.M.D. is more slowly released from the tissues than P.M.A. and the breakdown to inorganic mercury is low. The control of human exposure to alkyl and aryl mercury salts is considered in the light of these experimental observations. The recommendation that the concentration of alkyl mercury salts in the atmosphere should not exceed 0-01 mg/m/sup 3/ seems justifiable, but there appears to be no reason to establish the figure for aryl mercury salts below the 0-1 mg/m/sup 3/ recommended for inorganic mercury vapor. 13 references, 4 tables.

Crystal structure of 3-({[(morpholin-4-yl)carbono-thio-yl]sulfan-yl}acet-yl)phenyl benzoate.

Science.gov (United States)

Ambekar, Sachin P; Mahesh Kumar, K; Shirahatti, Arun Kumar M; Kotresh, O; Anil Kumar, G N

2014-11-01

In the title compound, C20H19NO4S2, the morpholine ring adopts the expected chair conformation. The central phenyl ring makes dihedral angles of 67.97 (4) and 7.74 (3)°, respectively, with the benzoate phenyl ring and the morpholine mean plane. In the crystal, mol-ecules are linked by C-H⋯O hydrogen bonds, forming zigzag chains along the b-axis direction. C-H⋯π inter-actions link centrosymmetrically related mol-ecules, reinforcing the three-dimensional structure.

Chemical Composition and Cytotoxic Activities of Petroleum Ether ...

African Journals Online (AJOL)

Methods: The composition of petroleum ether extract was analyzed by gas ... acids, sterides, pregnanones, terpenes, alkaloids, alkenes, alcohols, ketones, aldehydes and other compounds. .... and mass spectra with those obtained from the.

Temporal trend of bis(4-chlorophenyl) sulfone, methylsulfonyl-DDE and -PCBs in Baltic guillemot (Uria aalge) egg 1971-2001 - A comparison to 4,4'-DDE and PCB trends

International Nuclear Information System (INIS)