Evaluation of STAT medication ordering process in a community hospital.

Science.gov (United States)

Abdelaziz, Hani; Richardson, Sandra; Walsh, Kim; Nodzon, Jessica; Schwartz, Barbara

2016-01-01

In most health care facilities, problems related to delays in STAT medication order processing time are of common concern. The purpose of this study was to evaluate processing time for STAT orders at Kimball Medical Center. All STAT orders were reviewed to determine processing time; order processing time was also stratified by physician order entry (physician entered (PE) orders vs. non-physician entered (NPE) orders). Collected data included medication ordered, indication, time ordered, time verified by pharmacist, time sent from pharmacy, and time charted as given to the patient. A total of 502 STAT orders were reviewed and 389 orders were included for analysis. Overall, median time was 29 minutes, IQR 16-63; porder processing time may be improved by increasing the availability of medications in ADM, and pharmacy involvement in the verification process.

Temporal Order Processing in Adult Dyslexics.

Science.gov (United States)

Maxwell, David L.; And Others

This study investigated the premise that disordered temporal order perception in retarded readers can be seen in the serial processing of both nonverbal auditory and visual information, and examined whether such information processing deficits relate to level of reading ability. The adult subjects included 20 in the dyslexic group, 12 in the…

Neural mechanisms of order information processing in working memory

Directory of Open Access Journals (Sweden)

Barbara Dolenc

2013-11-01

Full Text Available The ability to encode and maintain the exact order of short sequences of stimuli or events is often crucial to our ability for effective high-order planning. However, it is not yet clear which neural mechanisms underpin this process. Several studies suggest that in comparison with item recognition temporal order coding activates prefrontal and parietal brain regions. Results of various studies tend to favour the hypothesis that the order of the stimuli is represented and encoded on several stages, from primacy and recency estimates to the exact position of the item in a sequence. Different brain regions play a different role in this process. Dorsolateral prefrontal cortex has a more general role in attention, while the premotor cortex is more involved in the process of information grouping. Parietal lobe and hippocampus also play a significant role in order processing as they enable the representation of distance. Moreover, order maintenance is associated with the existence of neural oscillators that operate at different frequencies. Electrophysiological studies revealed that theta and alpha oscillations play an important role in the maintenance of temporal order information. Those EEG oscillations are differentially associated with processes that support the maintenance of order information and item recognition. Various studies suggest a link between prefrontal areas and memory for temporal order, implying that EEG neural oscillations in the prefrontal cortex may play a role in the maintenance of information on temporal order.

Apparel Research Network (ARN) Apparel Order Processing Module (AOPM). Application Program for Management of Special Measurement Clothing Orders

Science.gov (United States)

1997-09-30

Screen, abandoning changes. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official Screens The Ordering Official Screens are provided for...currendy selected Ordering Official will appear on the Ordering Official Information Screen. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official

On the expressiveness and decidability of higher-order process calculi

NARCIS (Netherlands)

Lanese, Ivan; Perez, Jorge A.; Sangiorgi, Davide; Schmitt, Alan

In higher-order process calculi, the values exchanged in communications may contain processes. A core calculus of higher-order concurrency is studied; it has only the operators necessary to express higher-order communications: input prefix, process output, and parallel composition. By exhibiting a

Real-time progressive hyperspectral image processing endmember finding and anomaly detection

CERN Document Server

Chang, Chein-I

2016-01-01

The book covers the most crucial parts of real-time hyperspectral image processing: causality and real-time capability. Recently, two new concepts of real time hyperspectral image processing, Progressive Hyperspectral Imaging (PHSI) and Recursive Hyperspectral Imaging (RHSI). Both of these can be used to design algorithms and also form an integral part of real time hyperpsectral image processing. This book focuses on progressive nature in algorithms on their real-time and causal processing implementation in two major applications, endmember finding and anomaly detection, both of which are fundamental tasks in hyperspectral imaging but generally not encountered in multispectral imaging. This book is written to particularly address PHSI in real time processing, while a book, Recursive Hyperspectral Sample and Band Processing: Algorithm Architecture and Implementation (Springer 2016) can be considered as its companion book. Includes preliminary background which is essential to those who work in hyperspectral ima...

20 CFR 653.501 - Requirements for accepting and processing clearance orders.

Science.gov (United States)

2010-04-01

... the job order. (i) No agricultural or food processing order shall be included in job bank listings... clearance any job order seeking workers to perform agricultural or food processing work before reviewing it... order seeking workers to perform agricultural or food processing work into intrastate clearance unless...

Second-order analysis of structured inhomogeneous spatio-temporal point processes

DEFF Research Database (Denmark)

Møller, Jesper; Ghorbani, Mohammad

Statistical methodology for spatio-temporal point processes is in its infancy. We consider second-order analysis based on pair correlation functions and K-functions for first general inhomogeneous spatio-temporal point processes and second inhomogeneous spatio-temporal Cox processes. Assuming...... spatio-temporal separability of the intensity function, we clarify different meanings of second-order spatio-temporal separability. One is second-order spatio-temporal independence and relates e.g. to log-Gaussian Cox processes with an additive covariance structure of the underlying spatio......-temporal Gaussian process. Another concerns shot-noise Cox processes with a separable spatio-temporal covariance density. We propose diagnostic procedures for checking hypotheses of second-order spatio-temporal separability, which we apply on simulated and real data (the UK 2001 epidemic foot and mouth disease data)....

Negative Transfer Effects on L2 Word Order Processing.

Science.gov (United States)

Erdocia, Kepa; Laka, Itziar

2018-01-01

Does first language (L1) word order affect the processing of non-canonical but grammatical syntactic structures in second language (L2) comprehension? In the present study, we test whether L1-Spanish speakers of L2-Basque process subject-verb-object (SVO) and object-verb-subject (OVS) non-canonical word order sentences of Basque in the same way as Basque native speakers. Crucially, while OVS orders are non-canonical in both Spanish and Basque, SVO is non-canonical in Basque but is the canonical word order in Spanish. Our electrophysiological results showed that the characteristics of L1 affect the processing of the L2 even at highly proficient and early-acquired bilingual populations. Specifically, in the non-native group, we observed a left anterior negativity-like component when comparing S and O at sentence initial position and a P600 when comparing those elements at sentence final position. Those results are similar of those reported by Casado et al. (2005) for native speakers of Spanish indicating that L2-Basque speakers rely in their L1-Spanish when processing SVO-OVS word order sentences. Our results favored the competition model (MacWhinney, 1997).

Negative Transfer Effects on L2 Word Order Processing

Directory of Open Access Journals (Sweden)

Kepa Erdocia

2018-03-01

Full Text Available Does first language (L1 word order affect the processing of non-canonical but grammatical syntactic structures in second language (L2 comprehension? In the present study, we test whether L1-Spanish speakers of L2-Basque process subject–verb–object (SVO and object–verb–subject (OVS non-canonical word order sentences of Basque in the same way as Basque native speakers. Crucially, while OVS orders are non-canonical in both Spanish and Basque, SVO is non-canonical in Basque but is the canonical word order in Spanish. Our electrophysiological results showed that the characteristics of L1 affect the processing of the L2 even at highly proficient and early-acquired bilingual populations. Specifically, in the non-native group, we observed a left anterior negativity-like component when comparing S and O at sentence initial position and a P600 when comparing those elements at sentence final position. Those results are similar of those reported by Casado et al. (2005 for native speakers of Spanish indicating that L2-Basque speakers rely in their L1-Spanish when processing SVO–OVS word order sentences. Our results favored the competition model (MacWhinney, 1997.

Effects of vacancies on overshooting in nonequilibrium ordering processes

DEFF Research Database (Denmark)

Gilhøj, Henriette; Jeppesen, Claus; Mouritsen, Ole G.

1996-01-01

The effects of annealed site dilution on the nonequilibrium ordering process in the two-dimensional Ising model with a nonconserved order parameter have been studied using Monte Carlo simulation. It is found that the transient development of a local order that is larger than the equilibrium order...

Word Order Processing in the Bilingual Brain

Science.gov (United States)

Saur, Dorothee; Baumgaertner, Annette; Moehring, Anja; Buchel, Christian; Bonnesen, Matthias; Rose, Michael; Musso, Mariachristina; Meisel, Jurgen M.

2009-01-01

One of the issues debated in the field of bilingualism is the question of a "critical period" for second language acquisition. Recent studies suggest an influence of age of onset of acquisition (AOA) particularly on syntactic processing; however, the processing of word order in a sentence context has not yet been examined specifically. We used…

Optimizing the order processing of customized products using product configuration

DEFF Research Database (Denmark)

Hvam, Lars; Bonev, Martin; Denkena, B.

2011-01-01

. Product configuration based on integrated modular product structure and product family architecture has been recognized as an effective means for implementing mass customization. In order to evaluate the effects of product configuration on order processing, a study has been conducted by the Department...... and its benefits for the order processing have been evaluated....

Planning and realization of pipe installations with order processing system. Planung und Realisierung von Rohrleitungsanlagen mit einem Auftragsabwicklungssystem

Energy Technology Data Exchange (ETDEWEB)

Albrecht, H.P. (IKR Bitterfeld GmbH, Aussenstelle Berlin (Germany))

1993-08-01

The IKR-AAS ROHRDIALOG application software is a branche related order processing system available for pipe construction, as such as enables an all-purpose DP technical processing. Catalogues, systematically connected, as well as explicitely free uniformety allow a fast and convienient data structure and access by means of contextually sensitive investigate algorithm. On this basis all order data are listed once, administered and accessible for all relevant steps and departments from working out an offer via planning, material procurement, erection to invoicing. In addition to the common printed lists - material lists, evaluation lists, summaries, actual dimensions list -, the user is enabled to produce interesting evaluations for reporting e.g. material procurement, incoming goods and existing stock at erection side, erection progress. In cooperation with the design engineers the AUTOCAD application RohrCAD - flow charts, piping plan, isometry - has been developed and interfaced with the IKR-AAS ROHRDIALOG. (orig.)

Aspects of second-order analysis of structured inhomogeneous spatio-temporal processes

DEFF Research Database (Denmark)

Møller, Jesper; Ghorbani, Mohammad

2012-01-01

Statistical methodology for spatio-temporal point processes is in its infancy. We consider second-order analysis based on pair correlation functions and K-functions for general inhomogeneous spatio-temporal point processes and for inhomogeneous spatio-temporal Cox processes. Assuming spatio......-temporal separability of the intensity function, we clarify different meanings of second-order spatio-temporal separability. One is second-order spatio-temporal independence and relates to log-Gaussian Cox processes with an additive covariance structure of the underlying spatio-temporal Gaussian process. Another...... concerns shot-noise Cox processes with a separable spatio-temporal covariance density. We propose diagnostic procedures for checking hypotheses of second-order spatio-temporal separability, which we apply on simulated and real data....

Ordering process of sputtered FePt films

International Nuclear Information System (INIS)

Takahashi, Y.K.; Ohnuma, M.; Hono, K.

2003-01-01

We have investigated the in situ ordering process of sputtered FePt thin films deposited on heated substrates at 300 deg. C with different thicknesses. The films thinner than 50 nm were composed of nanograins (∼5 nm) of disordered FePt phase. Recrystallization occurred when films were grown thicker than 100 nm, and transformation twins were observed in recrystallized grains, in which ordering to the L1 0 structure was confirmed

Temporal order processing of syllables in the left parietal lobe.

Science.gov (United States)

Moser, Dana; Baker, Julie M; Sanchez, Carmen E; Rorden, Chris; Fridriksson, Julius

2009-10-07

Speech processing requires the temporal parsing of syllable order. Individuals suffering from posterior left hemisphere brain injury often exhibit temporal processing deficits as well as language deficits. Although the right posterior inferior parietal lobe has been implicated in temporal order judgments (TOJs) of visual information, there is limited evidence to support the role of the left inferior parietal lobe (IPL) in processing syllable order. The purpose of this study was to examine whether the left inferior parietal lobe is recruited during temporal order judgments of speech stimuli. Functional magnetic resonance imaging data were collected on 14 normal participants while they completed the following forced-choice tasks: (1) syllable order of multisyllabic pseudowords, (2) syllable identification of single syllables, and (3) gender identification of both multisyllabic and monosyllabic speech stimuli. Results revealed increased neural recruitment in the left inferior parietal lobe when participants made judgments about syllable order compared with both syllable identification and gender identification. These findings suggest that the left inferior parietal lobe plays an important role in processing syllable order and support the hypothesized role of this region as an interface between auditory speech and the articulatory code. Furthermore, a breakdown in this interface may explain some components of the speech deficits observed after posterior damage to the left hemisphere.

Structural changes in the ordering processes of macromolecular compounds

International Nuclear Information System (INIS)

Kobayashi, M.; Tashiro, K.

1998-01-01

In order to clarify the microscopically-viewed relationship between the conformational ordering process and the aggregation process of the macromolecular chains in the phase transitions from melt to solid or from solution to gel, the time-resolved Fourier-transform infrared spectra and small-angle X-ray or neutron scattering data have been analyzed in an organized manner. Two concrete examples were presented. (1) In the gelation phenomenon of syndiotactic polystyrene-organic solvent system, the ordered TTGG conformation is formed and develops with time. This conformational ordering is accelerated by the aggregation of these chain segments, resulting in the formation of macroscopic gel network. (2) In the isothermal crystallization process from the melt of polyethylene, the following ordering mechanism was revealed. The conformationally-disordered short trans conformers appear at first in the random coils of the melt. These disordered trans sequences grow to longer and more regular trans sequences of the orthorhombic-type crystal and then the isolated lamellae are formed. Afterwards, the stacked lamellar structure is developed without change of lamellar thickness but with small decrease in the long period, indicating an insertion of new lamellae between the already produced lamellar layers

Progress in ultrafast laser processing and future prospects

Science.gov (United States)

Sugioka, Koji

2017-03-01

The unique characteristics of ultrafast lasers have rapidly revolutionized materials processing after their first demonstration in 1987. The ultrashort pulse width of the laser suppresses heat diffusion to the surroundings of the processed region, which minimizes the formation of a heat-affected zone and thereby enables ultrahigh precision micro- and nanofabrication of various materials. In addition, the extremely high peak intensity can induce nonlinear multiphoton absorption, which extends the diversity of materials that can be processed to transparent materials such as glass. Nonlinear multiphoton absorption enables three-dimensional (3D) micro- and nanofabrication by irradiation with tightly focused femtosecond laser pulses inside transparent materials. Thus, ultrafast lasers are currently widely used for both fundamental research and practical applications. This review presents progress in ultrafast laser processing, including micromachining, surface micro- and nanostructuring, nanoablation, and 3D and volume processing. Advanced technologies that promise to enhance the performance of ultrafast laser processing, such as hybrid additive and subtractive processing, and shaped beam processing are discussed. Commercial and industrial applications of ultrafast laser processing are also introduced. Finally, future prospects of the technology are given with a summary.

Spatial serial order processing in schizophrenia.

Science.gov (United States)

Fraser, David; Park, Sohee; Clark, Gina; Yohanna, Daniel; Houk, James C

2004-10-01

The aim of this study was to examine serial order processing deficits in 21 schizophrenia patients and 16 age- and education-matched healthy controls. In a spatial serial order working memory task, one to four spatial targets were presented in a randomized sequence. Subjects were required to remember the locations and the order in which the targets were presented. Patients showed a marked deficit in ability to remember the sequences compared with controls. Increasing the number of targets within a sequence resulted in poorer memory performance for both control and schizophrenia subjects, but the effect was much more pronounced in the patients. Targets presented at the end of a long sequence were more vulnerable to memory error in schizophrenia patients. Performance deficits were not attributable to motor errors, but to errors in target choice. The results support the idea that the memory errors seen in schizophrenia patients may be due to saturating the working memory network at relatively low levels of memory load.

Order acceptance in food processing systems with random raw material requirements

NARCIS (Netherlands)

Kilic, Onur A.; van Donk, Dirk Pieter; Wijngaard, Jacob; Tarim, S. Armagan

This study considers a food production system that processes a single perishable raw material into several products having stochastic demands. In order to process an order, the amount of raw material delivery from storage needs to meet the raw material requirement of the order. However, the amount

A delta-rule model of numerical and non-numerical order processing.

Science.gov (United States)

Verguts, Tom; Van Opstal, Filip

2014-06-01

Numerical and non-numerical order processing share empirical characteristics (distance effect and semantic congruity), but there are also important differences (in size effect and end effect). At the same time, models and theories of numerical and non-numerical order processing developed largely separately. Currently, we combine insights from 2 earlier models to integrate them in a common framework. We argue that the same learning principle underlies numerical and non-numerical orders, but that environmental features determine the empirical differences. Implications for current theories on order processing are pointed out. PsycINFO Database Record (c) 2014 APA, all rights reserved.

The role of technical progress in the process of recalculating oil reserves

International Nuclear Information System (INIS)

Boulard, J.N.

1999-01-01

Contrary to the concept of resources (which is essentially a geological one), the notion of reserves designates the quantities that are technically and economically recoverable. Beyond the production-related effect, the reserves therefore evolve over time in accordance with numerous technical and economic parameters. Among these parameters, it can be seen that technical progress plays a considerable role throughout the process of converting resources into reserves, including progress in the identification, accessibility and processing of the resources, and improvements in economic viability. After having tackled the problem of measuring the 'technical progress effects' and citing examples, we demonstrate that the evolution in oil reserves is subject to three types of impact. These are a quantitative impact by significantly improving the recovery rates or making it possible to identify hitherto undetectable oil fields, a qualitative impact by widening the resource base thanks to the adoption of new categories of oil (in particular the so-called 'unconventional' oils) and by carrying out the gradual substitution between these resources of differing qualities. There is also a dynamic impact, through the acceleration of resource availability. Through these three approaches, technical progress makes makes it possible to ensure continuity in oil supply and contributes significantly to the recalculation of reserves. It therefore acts as a compensating factor, counterbalancing the progressive depletion of resources. (author)

17 CFR 256.107 - Construction work in progress.

Science.gov (United States)

2010-04-01

... UTILITY HOLDING COMPANY ACT OF 1935 Balance Sheet Accounts: Assets and Other Debit Accounts § 256.107 Construction work in progress. This account shall include the total of the balances of work orders for service company property in process of construction. Work orders shall be cleared from this account as soon as...

Economic Benefit from Progressive Integration of Scheduling and Control for Continuous Chemical Processes

Directory of Open Access Journals (Sweden)

Logan D. R. Beal

2017-12-01

Full Text Available Performance of integrated production scheduling and advanced process control with disturbances is summarized and reviewed with four progressive stages of scheduling and control integration and responsiveness to disturbances: open-loop segregated scheduling and control, closed-loop segregated scheduling and control, open-loop scheduling with consideration of process dynamics, and closed-loop integrated scheduling and control responsive to process disturbances and market fluctuations. Progressive economic benefit from dynamic rescheduling and integrating scheduling and control is shown on a continuously stirred tank reactor (CSTR benchmark application in closed-loop simulations over 24 h. A fixed horizon integrated scheduling and control formulation for multi-product, continuous chemical processes is utilized, in which nonlinear model predictive control (NMPC and continuous-time scheduling are combined.

Progress in the processing of radioesterilized tissue

International Nuclear Information System (INIS)

Zarate S, H; Espinoza B, J; Ribbeck N, J; Vargas Q, M; Gutierrez D, K

2003-01-01

Since 1996, the Chilean Nuclear Energy Commission has been carrying out work to implement the first Radiosterilized Tissue Processing Laboratory (RTPL) in Chile, in order to introduce the use of sterilized biological tissue for clinical application. The International Atomic Energy Agency (IAEA) has provided collaboration and technical assistance for this work. The processing of biological tissues has been done in conjunction with physicians from different state hospital centers, mostly in the Metropolitan Region. Among the tissues primarily processed are allografts such as frozen human skin at - 80 o C, freeze-dried human bone and amniotic membrane. We have also been working with xenograft developments such as freeze-dried pig skin and demineralized ground cow bone. All these tissues are sterilized by means of gamma radiation, in order to obtain a sterility assurance level (SAL) of 10 -6 . This laboratory has already completed various stages, from the beginning when it was only just an idea up to the production stage where a large quantity of processed tissues have been delivered to physicians of different specialties, resulting in a contribution to medical science as well as to the treatment quality of a great many patients. The preliminary results and the opinions of those physicians who have used the processed products from our laboratory have encouraged us to continue developing new products, thus enlarging the scope of application (author)

THE IMPACT OF THE ELEVATOR GUIDES CONTAMINATION ON THE BRAKING PROCESS DELAY FOR SELECTED PROGRESSIVE GEARS

Directory of Open Access Journals (Sweden)

Rafał Longwic

2017-06-01

Full Text Available The authors’ tests results on the impact of the guiding system (the guides contamination in the friction lift on the delay of progressive gears braking process are presented in this article. The tests were conducted using a free fall method and a test bench built for that purpose. In order to render all working conditions the guiding system of tested gears was lubricated with the most commonly used lubricating agents. Solid grease (SM, mineral oil (OL, the mixture of solid grease and quartz sand (S50 as well as the mixture of mineral oil and quartz sand (O50 were used.

Construction of experimental HMA test sections in order to monitor the compaction process

NARCIS (Netherlands)

ter Huerne, Henderikus L.; Molenaar, A.A.A.; van de Ven, M.F.C.

2003-01-01

For getting better understanding about the process of HMA compaction, a test section was constructed while the governing process parameters, like; compaction progress, temperature of the material at which activities were employed, equipment properties and meteorological circumstances, were

Birth order progressively affects childhood height.

Science.gov (United States)

Savage, Tim; Derraik, José G B; Miles, Harriet L; Mouat, Fran; Cutfield, Wayne S; Hofman, Paul L

2013-09-01

There is evidence suggesting that first-born children and adults are anthropometrically different to later-borns. Thus, we aimed to assess whether birth order was associated with changes in growth and metabolism in childhood. We studied 312 healthy prepubertal children: 157 first-borns and 155 later-borns. Children were aged 3-10 years, born 37-41 weeks gestation, and of birth weight appropriate-for-gestational-age. Clinical assessments included measurement of children's height, weight, fasting lipid and hormonal profiles and DEXA-derived body composition. First-borns were taller than later-borns (P < 0·0001), even when adjusted for parents' heights (0·31 vs 0·03 SDS; P = 0·001). There was an incremental height decrease with increasing birth order, so that first-borns were taller than second-borns (P < 0·001), who were in turn taller than third-borns (P = 0·007). Further, among sibling pairs both height SDS (P = 0·009) and adjusted height SDS (P < 0·0001) were lower in second- vs first-born children. Consistent with differences in stature, first- (P = 0·043) and second-borns (P = 0·003) had higher IGF-I concentrations than third-borns. Both first- (P < 0·001) and second-borns (P = 0·004) also had reduced abdominal adiposity (lower android fat to gynoid fat ratio) when compared with third-borns. Other parameters of adiposity and blood lipids were unaffected by birth order. First-borns were taller than later-born children, with an incremental height reduction from first to third birth order. These differences were present after correction for genetic height, and associated to some extent with alterations in plasma IGF-I. Our findings strengthen the evidence that birth order is associated with phenotypic changes in childhood. © 2013 John Wiley & Sons Ltd.

First-order Convex Optimization Methods for Signal and Image Processing

DEFF Research Database (Denmark)

Jensen, Tobias Lindstrøm

2012-01-01

In this thesis we investigate the use of first-order convex optimization methods applied to problems in signal and image processing. First we make a general introduction to convex optimization, first-order methods and their iteration complexity. Then we look at different techniques, which can...... be used with first-order methods such as smoothing, Lagrange multipliers and proximal gradient methods. We continue by presenting different applications of convex optimization and notable convex formulations with an emphasis on inverse problems and sparse signal processing. We also describe the multiple...

Improving the quality of the order-writing process for inpatient orders and outpatient prescriptions.

Science.gov (United States)

Meyer, T A

2000-12-15

Because many preventable medication errors occur at the ordering stage, a program for improving the quality of writing inpatient orders and outpatient prescriptions at one institution was developed. To determine whether potential problems existed in the order-writing process for inpatients, all physician orders for a seven-day period in 1997 were reviewed (n = 3740). More than 10% of all orders had illegible handwriting or were written with a felt-tip pen, which makes NCR copies difficult to read. Other potential errors were also identified. Following educational programs for physicians and residents focusing on the importance of writing orders clearly, physician orders were reviewed for a 24-hour period (n = 654). The use of felt-tip pens decreased to 1.37% of all orders, and no orders had illegible handwriting. A similar quality improvement approach was used to evaluate the outpatient prescription-writing process. A review of all new prescriptions for a consecutive seven-day period at a local hospital-owned community pharmacy (n = 1425) revealed that about 15% of the prescriptions had illegible handwriting and roughly 10% were incomplete. Additional data were gathered through a survey sent to 71 outside provider pharmacies requesting information on problems related to prescriptions written by physicians from the institution; 66% responded. Failure to print prescriber name (96%), illegible signature (94%), failure to include DEA number (89%), and illegible handwriting other than signature (69%) were reported as the main problems. Each physician was given a self-inking name stamp to use when writing prescriptions. In addition, educational programs covering examples of poorly written prescriptions and the legal requirements of a prescription were held for physicians and residents. A follow-up survey showed that 72% of pharmacies saw stamps being used; when stamps were not used, however, illegible signatures continued to be a problem. Follow-up reviews of outpatient

Simulation of business processes of processing and distribution of orders in transportation

Directory of Open Access Journals (Sweden)

Ольга Ігорівна Проніна

2017-06-01

Full Text Available Analyzing modern passenger transportation in Ukraine, we can conclude that with the increasing number of urban population the necessity to develop passenger traffic, as well as to improve the quality of transport services is increasing too. The paper examines the three existing models of private passenger transportation (taxi: a model with the use of dispatching service, without dispatching service model and a mixed model. An algorithm of getting an order, processing it, and its implementation according to the given model has been considered. Several arrangements schemes that characterize the operation of the system have been shown in the work as well. The interrelation of the client making an order and the driver who receives the order and executes it has been represented, the server being a connecting link between the customer and the driver and regulating the system as a whole. Business process of private passenger transportation without dispatching service was simulated. Basing on the simulation results it was proposed to supplement the model of private transportation by the making advice system, as well as improving the car selection algorithm. Advice system provides the optimum choice of the car, taking into account a lot of factors. And it will also make it possible to use more efficiently the specific additional services provided by the drivers. Due to the optimization of the order handling process it becomes possible to increase the capacity of the drivers thus increasing their profits. Passenger transportation without the use of dispatching service has some weak points and they were identified. Application of the system will improve transport structure in modern conditions, and improve the transportation basing on modern operating system

The Integration Order of Vector Autoregressive Processes

DEFF Research Database (Denmark)

Franchi, Massimo

We show that the order of integration of a vector autoregressive process is equal to the difference between the multiplicity of the unit root in the characteristic equation and the multiplicity of the unit root in the adjoint matrix polynomial. The equivalence with the standard I(1) and I(2...

Hanford Federal Facility Agreement and Consent Order, quarterly progress report, March 31, 1992

International Nuclear Information System (INIS)

1992-05-01

This is the twelfth quarterly report as required by the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) (Ecology et al. 1990), established between the US Department of Energy (DOE), the US Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology). The Tri-Party Agreement sets the plan and schedule for achieving regulatory compliance and cleanup of waste sites at the Hanford Site. This report covers progress for the quarter that ended March 31, 1992. Topics covered under technical status include: disposal of tank wastes; cleanup of past-practice units; permitting and closure of treatment, storage, and disposal units; and other tri-party agreement activities and issues

Electropolishing as a decontamination process: progress and applications

International Nuclear Information System (INIS)

Allen, R.P.; Arrowsmith, H.W.; Charlot, L.A.; Hooper, J.L.

1978-04-01

Research studies demonstrated the ability of electropolishing to reduce the radiation levels of steel tools and stainless steel vacuum system components, which were heavily contaminated with plutonium oxide, from 1 million dis/min x 100 cm 2 to background in less than 10 min. Other examples of objects that have been decontaminated within minutes using electropolishing include hot cell manipulator assemblies, analytical instrument components, laboratory transfer containers, offsite shipping containers, fission product storage capsules, laboratory animal cages, and nuclear reactor process tube components. One of the major activities of this research has been the establishment and intensive operation of a 400-gal immersion electropolishing system. Progress has also been made in developing in situ electropolishing techniques that can be used to decontaminate metallic surfaces that cannot readily be transported to or immersed in a conventional electropolishing tank. Sectioning/pretreatment studies are under way to develop and demonstrate optimum disassembly, sectioning, surface preparation, and gross contamination removal procedures. Arc saw, plasma arc torch, and explosive cutting techniques are being evaluated in terms of the thickness and characteristics of the disturbed metal layer. Some of the pretreatment methods under consideration for removal of paint, grease, corrosion layers, and gross contamination include vibratory finishing, ultrasonics, dry and liquid abrasive blasting, and high-pressure spray systems. Other supporting studies are also in progress to provide a sound technical basis for scale-up and widespread application of this new decontamination process. 44 figures

Study of aging and ordering processes in titanium carbide

International Nuclear Information System (INIS)

Arbuzov, M.P.; Khaenko, B.V.; Kachkovskaya, Eh.T.

1977-01-01

Aging and ordering processes in titanium carbide were investigated on monocrystals (fragments of alloys) with the aid of roentgenographic method. The sequence of phase transformations during aging was ascertained,and a monoclinic structure of the carbon atoms ordering is suggested. The microhardness of titanium carbide was studied as a function of the heat treatment of alloys and the main factors (ordering and dislocation structure) which govern the difference in the microhardness of hardened and aged (annealed) specimens were determined

The neural basis of monitoring goal progress

Directory of Open Access Journals (Sweden)

Yael eBenn

2014-09-01

Full Text Available The neural basis of progress monitoring has received relatively little attention compared to other sub-processes that are involved in goal directed behavior such as motor control and response inhibition. Studies of error-monitoring have identified the dorsal anterior cingulate cortex (dACC as a structure that is sensitive to conflict detection, and triggers corrective action. However, monitoring goal progress involves monitoring correct as well as erroneous events over a period of time. In the present research, 20 healthy participants underwent fMRI while playing a game that involved monitoring progress towards either a numerical or a visuo-spatial target. The findings confirmed the role of the dACC in detecting situations in which the current state may conflict with the desired state, but also revealed activations in the frontal and parietal regions, pointing to the involvement of processes such as attention and working memory in monitoring progress over time. In addition, activation of the cuneus was associated with monitoring progress towards a specific target presented in the visual modality. This is the first time that activation in this region has been linked to higher-order processing of goal-relevant information, rather than low-level anticipation of visual stimuli. Taken together, these findings identify the neural substrates involved in monitoring progress over time, and how these extend beyond activations observed in conflict and error monitoring.

The contribution of second-order processes to (3He, n) calculations

International Nuclear Information System (INIS)

Brissaud, I.

1978-01-01

The reactions 90 Zr, 116 Cd( 3 He, n) have been analysed by adding two second-order processes to the usual one-step DWBA calculations: sequential stripping or inelastic transition followed by double stripping. These second-order contributions increase the cross sections, especially for 90 Zr, and improve the shape of the angular distribution for 116 Cd. It shows that such second-order processes cannot be omitted in the analysis of two-particle stripping reactions. (author)

INARCH(1) processes: Higher-order moments and jumps

OpenAIRE

Weiß , Christian H.

2010-01-01

Abstract The INARCH(1) model is a simple but practically relevant, two-parameter model for processes of overdispersed counts with an autoregressive serial dependence structure. We derive closed-form expressions for the joint (central) moments and cumulants of the INARCH(1) model up to order 4. These expressions are applied to derive moments of jumps in INARCH(1) processes. We illustrate this kind of application with a real-data example, and outline further potential applications. ...

Milliwatt-generator heat source. Progress report, January-June 1983

International Nuclear Information System (INIS)

Mershad, E.A.

1983-01-01

Progress is reported in the following: heat source shipments, reimbursable orders, hardware shipments, raw material qualification/procurement, DOE audit and milliwatt generator process review, surveillance capsule evaluations, pressure burst testing, and hardware fabrication and quality

Effect of closed-loop order processing on the time to initial antimicrobial therapy.

Science.gov (United States)

Panosh, Nicole; Rew, Richardd; Sharpe, Michelle

2012-08-15

The results of a study comparing the average time to initiation of i.v. antimicrobial therapy with closed-versus open-loop order entry and processing are reported. A retrospective cohort study was performed to compare order-to-administration times for initial doses of i.v. antimicrobials before and after a closed-loop order-processing system including computerized prescriber order entry (CPOE) was implemented at a large medical center. A total of 741 i.v. antimicrobial administrations to adult patients during designated five-month preimplementation and postimplementation study periods were assessed. Drug-use reports generated by the pharmacy database were used to identify order-entry times, and medication administration records were reviewed to determine times of i.v. antimicrobial administration. The mean ± S.D. order-to-administration times before and after the implementation of the CPOE system and closed-loop order processing were 3.18 ± 2.60 and 2.00 ± 1.89 hours, respectively, a reduction of 1.18 hours (p Closed-loop order processing was associated with significant reductions in the average time to initiation of i.v. therapy in all patient care areas evaluated (cardiology, general medicine, and oncology). The study results suggest that CPOE-based closed-loop order processing can play an important role in achieving compliance with current practice guidelines calling for increased efforts to ensure the prompt initiation of i.v. antimicrobials for severe infections (e.g., sepsis, meningitis). Implementation of a closed-loop order-processing system resulted in a significant decrease in order-to-administration times for i.v. antimicrobial therapy.

A process for developing and revising a learning progression on sea level rise using learners' explanations

Science.gov (United States)

McDonald, Robert Christopher

The purpose of this study was to explore the process of developing a learning progression (LP) on constructing explanations about sea level rise. I used a learning progressions theoretical framework informed by the situated cognition learning theory. During this exploration, I explicitly described my decision-making process as I developed and revised a hypothetical learning progression. Correspondingly, my research question was: What is a process by which a hypothetical learning progression on sea level rise is developed into an empirical learning progression using learners' explanations? To answer this question, I used a qualitative descriptive single case study with multiple embedded cases (Yin, 2014) that employed analytic induction (Denzin, 1970) to analyze data collected on middle school learners (grades 6-8). Data sources included written artifacts, classroom observations, and semi-structured interviews. Additionally, I kept a researcher journal to track my thinking about the learning progression throughout the research study. Using analytic induction to analyze collected data, I developed eight analytic concepts: participant explanation structures varied widely, global warming and ice melt cause sea level rise, participants held alternative conceptions about sea level rise, participants learned about thermal expansion as a fundamental aspect of sea level rise, participants learned to incorporate authentic scientific data, participants' mental models of the ocean varied widely, sea ice melt contributes to sea level rise, and participants held vague and alternative conceptions about how pollution impacts the ocean. I started with a hypothetical learning progression, gathered empirical data via various sources (especially semi-structured interviews), revised the hypothetical learning progression in response to those data, and ended with an empirical learning progression comprising six levels of learner thinking. As a result of developing an empirically based LP

Accountability-based reengineering of an order fulfillment process

NARCIS (Netherlands)

Zhang, L.; Jiao, J.; Ma, Q.

2009-01-01

In view of the dynamic changes in a supply chain network and the significance of order fulfillment processes (OFPs) for the successful implementation of supply chain management, this paper puts forward an accountability-based methodology for companies to reengineer OFPs while considering both

Phenomenological analyses and their application to the Defense Waste Processing Facility probabilistic safety analysis accident progression event tree. Revision 1

International Nuclear Information System (INIS)

Kalinich, D.A.; Thomas, J.K.; Gough, S.T.; Bailey, R.T.; Kearnaghan, D.P.

1995-01-01

In the Defense Waste Processing Facility (DWPF) Safety Analysis Reports (SARs) for the Savannah River Site (SRS), risk-based perspectives have been included per US Department of Energy (DOE) Order 5480.23. The NUREG-1150 Level 2/3 Probabilistic Risk Assessment (PRA) methodology was selected as the basis for calculating facility risk. The backbone of this methodology is the generation of an Accident Progression Event Tree (APET), which is solved using the EVNTRE computer code. To support the development of the DWPF APET, deterministic modeling of accident phenomena was necessary. From these analyses, (1) accident progressions were identified for inclusion into the APET; (2) branch point probabilities and any attendant parameters were quantified; and (3) the radionuclide releases to the environment from accidents were determined. The phenomena of interest for accident progressions included explosions, fires, a molten glass spill, and the response of the facility confinement system during such challenges. A variety of methodologies, from hand calculations to large system-model codes, were used in the evaluation of these phenomena

Apparel Research Network (ARN); Apparel Order Processing Module (AOPM): Field User Manual, Version 1

Science.gov (United States)

1997-09-30

changes. Cancel Button Closes the Site Information Screen, abandoning changes. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official...on the Ordering Official Information Screen. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official Information Screen (Jjj

Time ordering of two-step processes in energetic ion-atom collisions: Basic formalism

International Nuclear Information System (INIS)

Stolterfoht, N.

1993-01-01

The semiclassical approximation is applied in second order to describe time ordering of two-step processes in energetic ion-atom collisions. Emphasis is given to the conditions for interferences between first- and second-order terms. In systems with two active electrons, time ordering gives rise to a pair of associated paths involving a second-order process and its time-inverted process. Combining these paths within the independent-particle frozen orbital model, time ordering is lost. It is shown that the loss of time ordering modifies the second-order amplitude so that its ability to interfere with the first-order amplitude is essentially reduced. Time ordering and the capability for interference is regained, as one path is blocked by means of the Pauli exclusion principle. The time-ordering formalism is prepared for papers dealing with collision experiments of single excitation [Stolterfoht et al., following paper, Phys. Rev. A 48, 2986 (1993)] and double excitation [Stolterfoht et al. (unpublished)

Apparel Research Network (ARN) Apparel Order Processing Module (AOPM). Application Program for Management of Special Measurement Clothing Orders

National Research Council Canada - National Science Library

Brekhus, Dennis

1997-01-01

..., to the defense apparel manufacturers. The Apparel Order Processing Module (AOPM) is designed to respond to the critical need for an ability to order clothing expeditiously for military recruits and for other military personnel...

On the Sustainability and Progress of Energy Neutral Mineral Processing

Directory of Open Access Journals (Sweden)

Frederik Reitsma

2018-01-01

Full Text Available A number of primary ores such as phosphate rock, gold-, copper- and rare earth ores contain considerable amounts of accompanying uranium and other critical materials. Energy neutral mineral processing is the extraction of unconventional uranium during primary ore processing to use it, after enrichment and fuel production, to generate greenhouse gas lean energy in a nuclear reactor. Energy neutrality is reached if the energy produced from the extracted uranium is equal to or larger than the energy required for primary ore processing, uranium extraction, -conversion, -enrichment and -fuel production. This work discusses the sustainability of energy neutral mineral processing and provides an overview of the current progress of a multinational research project on that topic conducted under the umbrella of the International Atomic Energy Agency.

Mobility as Progressivity: Ranking Income Processes According to Equality of Opportunity

OpenAIRE

Roland Benabou; Efe A. Ok

2001-01-01

Interest in economic mobility stems largely from its perceived role as an equalizer of opportunities, though not necessarily of outcomes. In this paper we show that this view leads very naturally to a methodology for the measurement of social mobility which has strong parallels with the theory of progressive taxation. We characterize opportunity--equalizing mobility processes, and provide simple criteria to determine when one process is more equalizing than another. We then explain how this m...

Ordering schemes for parallel processing of certain mesh problems

International Nuclear Information System (INIS)

O'Leary, D.

1984-01-01

In this work, some ordering schemes for mesh points are presented which enable algorithms such as the Gauss-Seidel or SOR iteration to be performed efficiently for the nine-point operator finite difference method on computers consisting of a two-dimensional grid of processors. Convergence results are presented for the discretization of u /SUB xx/ + u /SUB yy/ on a uniform mesh over a square, showing that the spectral radius of the iteration for these orderings is no worse than that for the standard row by row ordering of mesh points. Further applications of these mesh point orderings to network problems, more general finite difference operators, and picture processing problems are noted

Fractional-Order Identification and Control of Heating Processes with Non-Continuous Materials

Directory of Open Access Journals (Sweden)

Riccardo Caponetto

2016-11-01

Full Text Available The paper presents a fractional order model of a heating process and a comparison of fractional and standard PI controllers in its closed loop system. Preliminarily, an enhanced fractional order model for the heating process on non-continuous materials has been identified through a fitting algorithm on experimental data. Experimentation has been carried out on a finite length beam filled with three non-continuous materials (air, styrofoam, metal buckshots in order to identify a model in the frequency domain and to obtain a relationship between the fractional order of the heating process and the different materials’ properties. A comparison between the experimental model and the theoretical one has been performed, proving a significant enhancement of the fitting performances. Moreover the obtained modelling results confirm the fractional nature of the heating processes when diffusion occurs in non-continuous composite materials, and they show how the model’s fractional order can be used as a characteristic parameter for non-continuous materials with different composition and structure. Finally, three different kinds of controllers have been applied and compared in order to keep constant the beam temperature constant at a fixed length.

Context predicts word order processing in Broca's region.

Science.gov (United States)

Kristensen, Line Burholt; Engberg-Pedersen, Elisabeth; Wallentin, Mikkel

2014-12-01

The function of the left inferior frontal gyrus (L-IFG) is highly disputed. A number of language processing studies have linked the region to the processing of syntactical structure. Still, there is little agreement when it comes to defining why linguistic structures differ in their effects on the L-IFG. In a number of languages, the processing of object-initial sentences affects the L-IFG more than the processing of subject-initial ones, but frequency and distribution differences may act as confounding variables. Syntactically complex structures (like the object-initial construction in Danish) are often less frequent and only viable in certain contexts. With this confound in mind, the L-IFG activation may be sensitive to other variables than a syntax manipulation on its own. The present fMRI study investigates the effect of a pragmatically appropriate context on the processing of subject-initial and object-initial clauses with the IFG as our ROI. We find that Danish object-initial clauses yield a higher BOLD response in L-IFG, but we also find an interaction between appropriateness of context and word order. This interaction overlaps with traditional syntax areas in the IFG. For object-initial clauses, the effect of an appropriate context is bigger than for subject-initial clauses. This result is supported by an acceptability study that shows that, given appropriate contexts, object-initial clauses are considered more appropriate than subject-initial clauses. The increased L-IFG activation for processing object-initial clauses without a supportive context may be interpreted as reflecting either reinterpretation or the recipients' failure to correctly predict word order from contextual cues.

Progress Report on SAM Reduced-Order Model Development for Thermal Stratification and Mixing during Reactor Transients

Energy Technology Data Exchange (ETDEWEB)

Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-01

This report documents the initial progress on the reduced-order flow model developments in SAM for thermal stratification and mixing modeling. Two different modeling approaches are pursued. The first one is based on one-dimensional fluid equations with additional terms accounting for the thermal mixing from both flow circulations and turbulent mixing. The second approach is based on three-dimensional coarse-grid CFD approach, in which the full three-dimensional fluid conservation equations are modeled with closure models to account for the effects of turbulence.

Simulation of an Aspheric Glass Lens Forming Behavior in Progressive GMP Process

International Nuclear Information System (INIS)

Chang, Sung Ho; Lee, Young Min; Kang, Jeong Jin; Hong, Seok Kwan; Shin, Gwang Ho; Heo, Young Moo; Jung, Tae Sung

2007-01-01

Recently, GMP(Glass Molding Press) process is mainly used to produce aspheric glass lenses. Because glass lens is heated at high temperature above Tg (Transformation Temperature) for forming the glass, the quality of aspheric glass lens is deteriorated by residual stresses which are generated in a aspheric glass lens after forming. In this study, as a fundamental study to develop the mold for progressive GMP process, we conducted a aspheric glass lens forming simulation. Prior to a aspheric glass lens forming simulation, compression and thermal conductivity tests were carried out to obtain mechanical and thermal properties of K-PBK40 which is newly developed material for precision molding, and flow characteristics of K-PBK40 were obtained at high temperature. Then, using the flow characteristics obtained, compression simulation was carried out and compared with the experimental result for the purpose of verifying the obtained flow characteristics. Finally, a glass lens press simulation in progressive GMP process was carried out and we could forecast the shape of deformed glass lenses and residual stresses contribution in the structure of deformed glass lenses after forming

Progress and safety aspects in process heat utilization from nuclear systems

International Nuclear Information System (INIS)

Barnert, H.

1995-01-01

Report about the Status and the Progress in the Various Programs and Projects in the Federal Republic of Germany in Process Heat Utilization from the High Temperature Reactor and on Recent Changes of the Atomic Law in the Federal Republic of Germany with Big Influence on the Safety of Nuclear Energy Technology. (author)

Progression Analysis and Stage Discovery in Continuous Physiological Processes Using Image Computing

Directory of Open Access Journals (Sweden)

Ferrucci Luigi

2010-01-01

Full Text Available We propose an image computing-based method for quantitative analysis of continuous physiological processes that can be sensed by medical imaging and demonstrate its application to the analysis of morphological alterations of the bone structure, which correlate with the progression of osteoarthritis (OA. The purpose of the analysis is to quantitatively estimate OA progression in a fashion that can assist in understanding the pathophysiology of the disease. Ultimately, the texture analysis will be able to provide an alternative OA scoring method, which can potentially reflect the progression of the disease in a more direct fashion compared to the existing clinically utilized classification schemes based on radiology. This method can be useful not just for studying the nature of OA, but also for developing and testing the effect of drugs and treatments. While in this paper we demonstrate the application of the method to osteoarthritis, its generality makes it suitable for the analysis of other progressive clinical conditions that can be diagnosed and prognosed by using medical imaging.

A Study of the Air Force’s Exception Management Process: Its Effect on Customer Service and Order Processing

Science.gov (United States)

1991-09-01

The purpose of this study was two-fold; the first goal was to determine what the SBSS order processing is, and secondly to determine the effect the...current method of ECC management has on the SBSS order processing cycle and the level of customer service rendered by base supply. The research...revealed that exception management is a crucial component of a successful order processing function. Further, it was established that the level of customer

Application of Bf-EVALPSN to Real-time Process Order Control

International Nuclear Information System (INIS)

Nakamatsu, Kazumi; Akama, Seiki; Abe, Jair M.

2009-01-01

We have already proposed a paraconsistent annotated logic program called EVALPSN. In this paper, EVALPSN is developed to deal with before-after relations between two processes (time intervals), and its application to real-time process order control based on logical safety verification.

Simulation model of a single-server order picking workstation using aggregate process times

NARCIS (Netherlands)

Andriansyah, R.; Etman, L.F.P.; Rooda, J.E.; Biles, W.E.; Saltelli, A.; Dini, C.

2009-01-01

In this paper we propose a simulation modeling approach based on aggregate process times for the performance analysis of order picking workstations in automated warehouses with first-in-first-out processing of orders. The aggregate process time distribution is calculated from tote arrival and

47 CFR 52.36 - Standard data fields for simple port order processing.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Standard data fields for simple port order processing. 52.36 Section 52.36 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) NUMBERING Number Portability § 52.36 Standard data fields for simple port order processing. (a) A telecommunications...

Second-order analysis of semiparametric recurrent event processes.

Science.gov (United States)

Guan, Yongtao

2011-09-01

A typical recurrent event dataset consists of an often large number of recurrent event processes, each of which contains multiple event times observed from an individual during a follow-up period. Such data have become increasingly available in medical and epidemiological studies. In this article, we introduce novel procedures to conduct second-order analysis for a flexible class of semiparametric recurrent event processes. Such an analysis can provide useful information regarding the dependence structure within each recurrent event process. Specifically, we will use the proposed procedures to test whether the individual recurrent event processes are all Poisson processes and to suggest sensible alternative models for them if they are not. We apply these procedures to a well-known recurrent event dataset on chronic granulomatous disease and an epidemiological dataset on meningococcal disease cases in Merseyside, United Kingdom to illustrate their practical value. © 2011, The International Biometric Society.

Progress in the development of the write process

Energy Technology Data Exchange (ETDEWEB)

Guffey, F.D.; Fahy, J.; Worman, D.; Lowry, C.; Mones, C. [Western Research Inst., Laramie, WY (United States); Corscadden, T.; Diduch, G. [MEG Energy Corp., Calgary, AB (Canada)

2009-07-01

This presentation described the commercialization of a field deployable upgrader developed by the Western Research Institute (WRI). The WRI Thermal Enhancement (WRITE) process was first tested in a 1-bbl/day bench scale unit. Based on the results of the testing program, a 5 bbl/day WRITE Process pilot plant was designed and built. It is currently in operation at WRI's Advanced Technology Center in Laramie, Wyoming. The 5 bbl/day WRITE Process pilot plant includes a 5 bbl/day distillate recovery unit (DRU) and a continuous coker that receives the produced bottoms. The DRU recovers diluent for recycling. The bitumen undergoes thermal conversion in the WRITE reactor to produce a pipeline quality product. The pyrolyzate produced by the coker is blended with the DRU to produce a synthetic crude oil (SCO) that is pipelined to existing refineries. Studies are currently underway at the pilot plant using dilbit produced at EMG's Christina Lake site. This presentation described the experimental program that is in progress. It also discussed the commercial viability of the technology for producing a pipeline quality product. tabs., figs.

Progressive sample processing of band selection for hyperspectral imagery

Science.gov (United States)

Liu, Keng-Hao; Chien, Hung-Chang; Chen, Shih-Yu

2017-10-01

Band selection (BS) is one of the most important topics in hyperspectral image (HSI) processing. The objective of BS is to find a set of representative bands that can represent the whole image with lower inter-band redundancy. Many types of BS algorithms were proposed in the past. However, most of them can be carried on in an off-line manner. It means that they can only be implemented on the pre-collected data. Those off-line based methods are sometime useless for those applications that are timeliness, particular in disaster prevention and target detection. To tackle this issue, a new concept, called progressive sample processing (PSP), was proposed recently. The PSP is an "on-line" framework where the specific type of algorithm can process the currently collected data during the data transmission under band-interleavedby-sample/pixel (BIS/BIP) protocol. This paper proposes an online BS method that integrates a sparse-based BS into PSP framework, called PSP-BS. In PSP-BS, the BS can be carried out by updating BS result recursively pixel by pixel in the same way that a Kalman filter does for updating data information in a recursive fashion. The sparse regression is solved by orthogonal matching pursuit (OMP) algorithm, and the recursive equations of PSP-BS are derived by using matrix decomposition. The experiments conducted on a real hyperspectral image show that the PSP-BS can progressively output the BS status with very low computing time. The convergence of BS results during the transmission can be quickly achieved by using a rearranged pixel transmission sequence. This significant advantage allows BS to be implemented in a real time manner when the HSI data is transmitted pixel by pixel.

Order Picking Process in Warehouse: Case Study of Dairy Industry in Croatia

Directory of Open Access Journals (Sweden)

Josip Habazin

2017-02-01

Full Text Available The proper functioning of warehouse processes is fundamental for operational improvement and overall logistic supply chain improvement. Order picking is considered one of the most important from the group. Throughout picking orders in warehouses, the presence of human work is highly reflected, with the main goal to reduce the process time as much as possible, that is, to the very minimum. There are several different order picking methods, and nowadays, the most common ones are being developed and are significantly dependent on the type of goods, the warehouse equipment, etc., and those that stand out are scanning and picking by voice. This paper will provide information regarding the dairy industry in the Republic of Croatia with the analysis of order picking process in the observed company. Overall research highlighted the problem and resulted in proposals of solutions.

Quantum-orbit theory of high-order atomic processes in strong fields

International Nuclear Information System (INIS)

Milosevic, D.B.

2005-01-01

Full text: Atoms submitted to strong laser fields can emit electrons and photons of very high energies. These processes find a highly intuitive and also quantitative explanation in terms of Feynman's path integral and the concept of quantum orbits. The quantum-orbit formalism is particularly useful for high-order atomic processes in strong laser fields. For such multi-step processes there is an intermediate step during which the electron is approximately under the influence of the laser field only and can absorb energy from the field. This leads to the appearance of the plateau structures in the emitted electron or photon spectra. Usual examples of such processes are high-order harmonic generation (HHG) and high-order above threshold ionization (HATI). These structures were also observed in high-order above-threshold detachment, laser-assisted x-ray-atom scattering, laser-assisted electron-ion recombination, and electron-atom scattering. We will present high-order strong-field approximation (SFA) and show how the quantum-orbit formalism follows from it. This will be done for various above-mentioned processes. For HHG a classification of quantum orbits will be given [10) and generalized to the presence of a static field. The low-energy part of the HHG spectra and the enhancement of HHG near the channel closings can be explained taking into account a large number of quantum orbits. For HATI we will concentrate on the case of few-cycle laser pulse. The influence of the carrier-envelope relative phase on the HATI spectrum can easily be explained in terms of quantum orbits. The SFA and the quantum-orbit results will be compared with the results obtained by Dieter Bauer using ab initio solutions of the time-dependent Schroedinger equation. It will be shown that the Coulomb effects are important for low-energy electron spectra. Refs. 11 (author)

Order out of Randomness: Self-Organization Processes in Astrophysics

Science.gov (United States)

Aschwanden, Markus J.; Scholkmann, Felix; Béthune, William; Schmutz, Werner; Abramenko, Valentina; Cheung, Mark C. M.; Müller, Daniel; Benz, Arnold; Chernov, Guennadi; Kritsuk, Alexei G.; Scargle, Jeffrey D.; Melatos, Andrew; Wagoner, Robert V.; Trimble, Virginia; Green, William H.

2018-03-01

Self-organization is a property of dissipative nonlinear processes that are governed by a global driving force and a local positive feedback mechanism, which creates regular geometric and/or temporal patterns, and decreases the entropy locally, in contrast to random processes. Here we investigate for the first time a comprehensive number of (17) self-organization processes that operate in planetary physics, solar physics, stellar physics, galactic physics, and cosmology. Self-organizing systems create spontaneous " order out of randomness", during the evolution from an initially disordered system to an ordered quasi-stationary system, mostly by quasi-periodic limit-cycle dynamics, but also by harmonic (mechanical or gyromagnetic) resonances. The global driving force can be due to gravity, electromagnetic forces, mechanical forces (e.g., rotation or differential rotation), thermal pressure, or acceleration of nonthermal particles, while the positive feedback mechanism is often an instability, such as the magneto-rotational (Balbus-Hawley) instability, the convective (Rayleigh-Bénard) instability, turbulence, vortex attraction, magnetic reconnection, plasma condensation, or a loss-cone instability. Physical models of astrophysical self-organization processes require hydrodynamic, magneto-hydrodynamic (MHD), plasma, or N-body simulations. Analytical formulations of self-organizing systems generally involve coupled differential equations with limit-cycle solutions of the Lotka-Volterra or Hopf-bifurcation type.

High-Order Sparse Linear Predictors for Audio Processing

DEFF Research Database (Denmark)

Giacobello, Daniele; van Waterschoot, Toon; Christensen, Mads Græsbøll

2010-01-01

Linear prediction has generally failed to make a breakthrough in audio processing, as it has done in speech processing. This is mostly due to its poor modeling performance, since an audio signal is usually an ensemble of different sources. Nevertheless, linear prediction comes with a whole set...... of interesting features that make the idea of using it in audio processing not far fetched, e.g., the strong ability of modeling the spectral peaks that play a dominant role in perception. In this paper, we provide some preliminary conjectures and experiments on the use of high-order sparse linear predictors...... in audio processing. These predictors, successfully implemented in modeling the short-term and long-term redundancies present in speech signals, will be used to model tonal audio signals, both monophonic and polyphonic. We will show how the sparse predictors are able to model efficiently the different...

Ordering of diagnostic information in encoded medical images. Accuracy progression

Science.gov (United States)

Przelaskowski, A.; Jóźwiak, R.; Krzyżewski, T.; Wróblewska, A.

2008-03-01

A concept of diagnostic accuracy progression for embedded coding of medical images was presented. Implementation of JPEG2000 encoder with a modified PCRD optimization algorithm was realized and initially verified as a tool for accurate medical image streaming. Mean square error as a distortion measure was replaced by other numerical measures to revise quality progression according to diagnostic importance of successively encoded image information. A faster increment of image diagnostic importance during reconstruction of initial packets of code stream was reached. Modified Jasper code was initially tested on a set of mammograms containing clusters of microcalcifications and malignant masses, and other radiograms. Teleradiologic applications were considered as the first area of interests.

The amblyopic deficit for 2nd order processing: Generality and laterality.

Science.gov (United States)

Gao, Yi; Reynaud, Alexandre; Tang, Yong; Feng, Lixia; Zhou, Yifeng; Hess, Robert F

2015-09-01

A number of previous reports have suggested that the processing of second-order stimuli by the amblyopic eye (AE) is defective and that the fellow non-amblyopic eye (NAE) also exhibits an anomaly. Second-order stimuli involve extra-striate as well as striate processing and provide a means of exploring the extent of the cortical anomaly in amblyopia using psychophysics. We use a range of different second-order stimuli to investigate how general the deficit is for detecting second-order stimuli in adult amblyopes. We compare these results to our previously published adult normative database using the same stimuli and approach to determine the extent to which the detection of these stimuli is defective for both amblyopic and non-amblyopic eye stimulation. The results suggest that the second-order deficit affects a wide range of second-order stimuli, and by implication a large area of extra-striate cortex, both dorsally and ventrally. The NAE is affected only in motion-defined form judgments, suggesting a difference in the degree to which ocular dominance is disrupted in dorsal and ventral extra-striate regions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Photoemission perspective on pseudogap, superconducting fluctuations, and charge order in cuprates: a review of recent progress

Science.gov (United States)

Vishik, I. M.

2018-06-01

In the course of seeking the microscopic mechanism of superconductivity in cuprate high temperature superconductors, the pseudogap phase— the very abnormal ‘normal’ state on the hole-doped side— has proven to be as big of a quandary as superconductivity itself. Angle-resolved photoemission spectroscopy (ARPES) is a powerful tool for assessing the momentum-dependent phenomenology of the pseudogap, and recent technological developments have permitted a more detailed understanding. This report reviews recent progress in understanding the relationship between superconductivity and the pseudogap, the Fermi arc phenomena, and the relationship between charge order and pseudogap from the perspective of ARPES measurements.

Visualization and processing of higher order descriptors for multi-valued data

CERN Document Server

Schultz, Thomas

2015-01-01

Modern imaging techniques and computational simulations yield complex multi-valued data that require higher-order mathematical descriptors. This book addresses topics of importance when dealing with such data, including frameworks for image processing, visualization, and statistical analysis of higher-order descriptors. It also provides examples of the successful use of higher-order descriptors in specific applications and a glimpse of the next generation of diffusion MRI. To do so, it combines contributions on new developments, current challenges in this area, and state-of-the-art surveys.   Compared to the increasing importance of higher-order descriptors in a range of applications, tools for analysis and processing are still relatively hard to come by. Even though application areas such as medical imaging, fluid dynamics, and structural mechanics are very different in nature they face many shared challenges. This book provides an interdisciplinary perspective on this topic with contributions from key rese...

The progressive tax

OpenAIRE

Estrada, Fernando

2010-01-01

This article describes the argumentative structure of Hayek on the relationship between power to tax and the progressive tax. It is observed throughout its work giving special attention to two works: The Constitution of Liberty (1959) and Law, Legislation and Liberty, vol3; The Political Order of Free People, 1979) Hayek describes one of the arguments most complete information bout SFP progressive tax systems (progressive tax). According to the author the history of the tax progressive system...

Progress in abrasive and grinding technology

CERN Document Server

Xu, Xipeng

2009-01-01

The grinding and abrasive processing of materials are machining techniques which use bonded or loose abrasives to remove material from workpieces. Due to the well-known advantages of grinding and abrasive processes, advances in abrasive and grinding technology are always of great import in enhancing both productivity and component quality. In order to highlight the recent progress made in this field, the editor invited 21 world-wide contributions with the aim of gathering together all of the achievements of leading researchers into a single publication. The authors of the 21 invited papers, of

Ordering of Nb3Sn layer formed in the bronze process

International Nuclear Information System (INIS)

Agarwal, S.K.; Nagpal, K.C.; Narlikar, A.G.

1986-01-01

The work reported here suggests that the ordering of superconducting Nb 3 Sn compound layers formed in the bronze process is much more intriguing than previously assumed. Various possible mechanisms of ordering of the layers have been examined in conjunction with the observed data on short duration annealed samples. The analysis suggests the ordering to be governed by a sequential operation of both Ist and IInd order kinetics, and seems to fall in line with the studies on disordered bulk samples annealed for long durations. (author)

The neural basis of temporal order processing in past and future thought.

Science.gov (United States)

D'Argembeau, Arnaud; Jeunehomme, Olivier; Majerus, Steve; Bastin, Christine; Salmon, Eric

2015-01-01

Although growing evidence has shown that remembering the past and imagining the future recruit a common core network of frontal-parietal-temporal regions, the extent to which these regions contribute to the temporal dimension of autobiographical thought remains unclear. In this fMRI study, we focused on the event-sequencing aspect of time and examined whether ordering past and future events involve common neural substrates. Participants had to determine which of two past (or future) events occurred (or would occur) before the other, and these order judgments were compared with a task requiring to think about the content of the same past or future events. For both past and future events, we found that the left posterior hippocampus was more activated when establishing the order of events, whereas the anterior hippocampus was more activated when representing their content. Aside from the hippocampus, most of the brain regions that were activated when thinking about temporal order (notably the intraparietal sulcus, dorsolateral pFC, dorsal anterior cingulate, and visual cortex) lied outside the core network and may reflect the involvement of controlled processes and visuospatial imagery to locate events in time. Collectively, these findings suggest (a) that the same processing operations are engaged for ordering past events and planned future events in time, (b) that anterior and posterior portions of the hippocampus are involved in processing different aspects of autobiographical thought, and (c) that temporal order is not necessarily an intrinsic property of memory or future thought but instead requires additional, controlled processes.

Two-degree-of-freedom fractional order-PID controllers design for fractional order processes with dead-time.

Science.gov (United States)

Li, Mingjie; Zhou, Ping; Zhao, Zhicheng; Zhang, Jinggang

2016-03-01

Recently, fractional order (FO) processes with dead-time have attracted more and more attention of many researchers in control field, but FO-PID controllers design techniques available for the FO processes with dead-time suffer from lack of direct systematic approaches. In this paper, a simple design and parameters tuning approach of two-degree-of-freedom (2-DOF) FO-PID controller based on internal model control (IMC) is proposed for FO processes with dead-time, conventional one-degree-of-freedom control exhibited the shortcoming of coupling of robustness and dynamic response performance. 2-DOF control can overcome the above weakness which means it realizes decoupling of robustness and dynamic performance from each other. The adjustable parameter η2 of FO-PID controller is directly related to the robustness of closed-loop system, and the analytical expression is given between the maximum sensitivity specification Ms and parameters η2. In addition, according to the dynamic performance requirement of the practical system, the parameters η1 can also be selected easily. By approximating the dead-time term of the process model with the first-order Padé or Taylor series, the expressions for 2-DOF FO-PID controller parameters are derived for three classes of FO processes with dead-time. Moreover, compared with other methods, the proposed method is simple and easy to implement. Finally, the simulation results are given to illustrate the effectiveness of this method. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Progress on double-logarithmic large-x and small-x resummations for (semi-)inclusive hard processes

International Nuclear Information System (INIS)

Vogt, A.; Kom, C.H.; Lo Presti, N.A.; Soar, G.; Vermaseren, J.A.M.; Yeats, K.

2012-12-01

Over the past few years considerable progress has been made on the resummation of double-logarithmically enhanced threshold (large-x) and high-energy (small-x) higher-order contributions to the splitting functions for parton and fragmentation distributions and to the coefficient functions for inclusive deep-inelastic scattering and semi-inclusive e + e - annihilation. We present an overview of the methods which allow, in many cases, to derive the coefficients of the highest three logarithms at all orders in the strong coupling from next-to-next-to-leading order results in massless perturbative QCD. Some representative analytical and numerical results are shown, and the present limitations of these resummations are discussed.

Cascading second-order nonlinear processes in a lithium niobate-on-insulator microdisk.

Science.gov (United States)

Liu, Shijie; Zheng, Yuanlin; Chen, Xianfeng

2017-09-15

Whispering-gallery-mode (WGM) microcavities are very important in both fundamental science and practical applications, among which on-chip second-order nonlinear microresonators play an important role in integrated photonic functionalities. Here we demonstrate resonant second-harmonic generation (SHG) and cascaded third-harmonic generation (THG) in a lithium niobate-on-insulator (LNOI) microdisk resonator. Efficient SHG in the visible range was obtained with only several mW input powers at telecom wavelengths. THG was also observed through a cascading process, which reveals simultaneous phase matching and strong mode coupling in the resonator. Cascading of second-order nonlinear processes gives rise to an effectively large third-order nonlinearity, which makes on-chip second-order nonlinear microresonators a promising frequency converter for integrated nonlinear photonics.

75 FR 6089 - Processed Raspberry Promotion, Research, and Information Order; Referendum Procedures

Science.gov (United States)

2010-02-08

..., Advertising, Consumer information, Marketing agreements, Processed Raspberries, Promotion, Reporting and...-705-FR] RIN 0581-AC79 Processed Raspberry Promotion, Research, and Information Order; Referendum... referendum to determine whether the issuance of the proposed Processed Raspberry Promotion, Research, and...

Integrating a Genetic Algorithm Into a Knowledge-Based System for Ordering Complex Design Processes

Science.gov (United States)

Rogers, James L.; McCulley, Collin M.; Bloebaum, Christina L.

1996-01-01

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative subcycles. In analyzing or optimizing such a coupled system, it is essential to be able to determine the best ordering of the processes within these subcycles to reduce design cycle time and cost. Many decomposition approaches assume the capability is available to determine what design processes and couplings exist and what order of execution will be imposed during the design cycle. Unfortunately, this is often a complex problem and beyond the capabilities of a human design manager. A new feature, a genetic algorithm, has been added to DeMAID (Design Manager's Aid for Intelligent Decomposition) to allow the design manager to rapidly examine many different combinations of ordering processes in an iterative subcycle and to optimize the ordering based on cost, time, and iteration requirements. Two sample test cases are presented to show the effects of optimizing the ordering with a genetic algorithm.

Processing the Order of Symbolic Numbers: A Reliable and Unique Predictor of Arithmetic Fluency

Directory of Open Access Journals (Sweden)

Stephan E. Vogel

2017-12-01

Full Text Available A small but growing body of evidence suggests a link between individual differences in processing the order of numerical symbols (e.g., deciding whether a set of digits is arranged in ascending/descending order or not and arithmetic achievement. However, the reliability of behavioral correlates measuring symbolic and non-symbolic numerical order processing and their relationship to arithmetic abilities remain poorly understood. The present study aims to fill this knowledge gap by examining the behavioral correlates of numerical and non-numerical order processing and their unique associations with arithmetic fluency at two different time points within the same sample of individuals. Thirty-two right-handed adults performed three order judgment tasks consisting of symbolic numbers (i.e., digits, non-symbolic numbers (i.e., dots, and letters of the alphabet. Specifically, participants had to judge as accurately and as quickly as possible whether stimuli were ordered correctly (in ascending/descending order, e.g., 2-3-4; ●●●●-●●●-●●; B-C-D or not (e.g., 4-5-3; ●●●●-●●●●●-●●●; D-E-C. Results of this study demonstrate that numerical order judgments are reliable measurements (i.e., high test-retest reliability, and that the observed relationship between symbolic number processing and arithmetic fluency accounts for a unique and reliable portion of variance over and above the non-symbolic number and the letter conditions. The differential association of symbolic and non-symbolic numbers with arithmetic support the view that processing the order of symbolic and non-symbolic numbers engages different cognitive mechanisms, and that the ability to process ordinal relationships of symbolic numbers is a reliable and unique predictor of arithmetic fluency.

Improving the quality of the order-writing process for inpatient orders in a teaching hospital.

Science.gov (United States)

Boehringer, Peter A; Rylander, Jeanette; Dizon, Dominic T; Peterson, Michael W

2007-01-01

Physicians' illegible handwriting is a notorious contributing factor to medical errors. Furthermore, an illegible signature or failure to print prescribers' name interferes with the ability of staff to clarify orders. We surveyed support medical staff at a teaching hospital before and 2 months after providing all internal medicine department residents a self-inking stamp with their name and pager number. Responses were received from 51% at the first and 36% at the second survey of 401 eligible staff. Responses to questions regarding illegible or absent signature, illegible or absent pager number, and failure to print prescribers' name showed a significant improvement (P writing process. This kind of signature allows clarification of orders in a timely fashion.

NLL order contributions for exclusive processes in jet-calculus scheme

International Nuclear Information System (INIS)

Tanaka, Hidekazu

2011-01-01

We investigate the next-to-leading logarithmic (NLL) order contributions of the quantum chromodynamics (QCD) for exclusive processes evaluated by Monte Carlo methods. Ambiguities of the Monte Carlo calculation based on the leading-logarithmic (LL) order approximations are pointed out. To remove these ambiguities, we take into account the NLL order terms. In a model presented in this paper, interference contributions due to the NLL order terms are included for the generation of the transverse momenta in initial-state parton radiations. Furthermore, a kinematical constraint due to parton radiation, which is also a part of the NLL order contributions, is taken into account. This method guarantees a proper phase space boundary for hard scattering cross sections as well as parton radiations. As an example, cross sections for lepton pair productions mediated by a virtual photon in hadron-hadron collisions are calculated, using the jet-calculus scheme for flavor nonsinglet quarks. (author)

Study progression in application of process analytical technologies on film coating

Directory of Open Access Journals (Sweden)

Tingting Peng

2015-06-01

Full Text Available Film coating is an important unit operation to produce solid dosage forms, thereby, the monitoring of this process is helpful to find problems in time and improve the quality of coated products. Traditional methods adopted to monitor this process include measurement of coating weight gain, performance of disintegration and dissolution test, etc. However, not only do these methods cause destruction to the samples, but also consume time and energy. There have recently emerged the applications of process analytical technologies (PAT on film coating, especially some novel spectroscopic and imaging technologies, which have the potential to real-time track the progress in film coating and optimize production efficiency. This article gives an overview on the application of such technologies for film coating, with the goal to provide a reference for the further researches.

Progress on double-logarithmic large-x and small-x resummations for (semi-)inclusive hard processes

Energy Technology Data Exchange (ETDEWEB)

Vogt, A.; Kom, C.H.; Lo Presti, N.A.; Soar, G. [Liverpool Univ. (United Kingdom). Dept. of Mathematical Sciences; Almasy, A.A.; Moch, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Vermaseren, J.A.M. [NIKHEF Theory Group, Amsterdam (Netherlands); Yeats, K. [Simon Fraser Univ., Burnaby, BC (Canada). Dept. of Mathematics

2012-12-15

Over the past few years considerable progress has been made on the resummation of double-logarithmically enhanced threshold (large-x) and high-energy (small-x) higher-order contributions to the splitting functions for parton and fragmentation distributions and to the coefficient functions for inclusive deep-inelastic scattering and semi-inclusive e{sup +}e{sup -} annihilation. We present an overview of the methods which allow, in many cases, to derive the coefficients of the highest three logarithms at all orders in the strong coupling from next-to-next-to-leading order results in massless perturbative QCD. Some representative analytical and numerical results are shown, and the present limitations of these resummations are discussed.

Model-based setup assistant for progressive tools

Science.gov (United States)

Springer, Robert; Gräler, Manuel; Homberg, Werner; Henke, Christian; Trächtler, Ansgar

2018-05-01

In the field of production systems, globalization and technological progress lead to increasing requirements regarding part quality, delivery time and costs. Hence, today's production is challenged much more than a few years ago: it has to be very flexible and produce economically small batch sizes to satisfy consumer's demands and avoid unnecessary stock. Furthermore, a trend towards increasing functional integration continues to lead to an ongoing miniaturization of sheet metal components. In the industry of electric connectivity for example, the miniaturized connectors are manufactured by progressive tools, which are usually used for very large batches. These tools are installed in mechanical presses and then set up by a technician, who has to manually adjust a wide range of punch-bending operations. Disturbances like material thickness, temperatures, lubrication or tool wear complicate the setup procedure. In prospect of the increasing demand of production flexibility, this time-consuming process has to be handled more and more often. In this paper, a new approach for a model-based setup assistant is proposed as a solution, which is exemplarily applied in combination with a progressive tool. First, progressive tools, more specifically, their setup process is described and based on that, the challenges are pointed out. As a result, a systematic process to set up the machines is introduced. Following, the process is investigated with an FE-Analysis regarding the effects of the disturbances. In the next step, design of experiments is used to systematically develop a regression model of the system's behaviour. This model is integrated within an optimization in order to calculate optimal machine parameters and the following necessary adjustment of the progressive tool due to the disturbances. Finally, the assistant is tested in a production environment and the results are discussed.

Deep Magnetic Diagenesis in Sediments: Progressive and Punctuated Processes.

Science.gov (United States)

Musgrave, R. J.; Kars, M. A. C.; Vega, M. E.

2017-12-01

Magnetic diagenesis in the tuffaceous muds, mudstones and volcaniclastic rocks cored at IODP Site U1437 is a product of progressive processes that continue throughout the 1800-m-thick sequence, punctuated by superimposed features corresponding to a series of influxes of fluids and concentrations of hydrocarbons. XRD, visual examination and SEM images indicate the presence of both magnetite and the magnetic sulfide greigite. Inferences from high values of saturation isothermal remanence normalised by magnetic susceptibility (SIRM/χ), distribution of hysteresis data near a diagenetic greigite curve on a Day plot, and 'humping' of low-temperature cycles of SIRM suggest that detrital magnetite and diagenetic greigite are both significant contributors to the magnetic assemblage, with greigite constituting a higher proportion in shallower samples. Progressive magnetic diagenesis is expressed as a continuing background decrease in SIRM/χ. FORC curves indicate an initial diagenetic growth of one or more higher-coercivity phases, followed downhole by increasing loss of all but low-coercivity material. The downhole pattern is consistent with progressive loss of fine-grained magnetite, initial authigenesis of greigite, and progressive pyritisation of the greigite. Some coarse-grained samples from the base of the sequence buck the trend, exhibiting SD behavior probably related to surviving magnetite inclusions in silicates. Shipboard fluid analysis revealed a complex profile of interstitial-water geochemistry, marked by several fluid influxes, including inputs of sulfate-rich water at about 275 and 460 meters below seafloor (mbsf). Methane concentrations, mostly low, markedly increase in the interval between 750 and 1460 mbsf, and ethane appears below an inferred fault at 1104 mbsf. Each of these fluid events is marked by offsets in the rock magnetic parameters SIRM/χ, S-0.3T, and DJH, representing repeated phases of late diagenetic growth of greigite in response to

Perturbation and characterization of nonlinear processes: Progress report, November 15, 1983-June 1, 1987

International Nuclear Information System (INIS)

Swinney, H.L.; Swift, J.

1987-01-01

This progress report summarizes the principal accomplishments dealing with perturbation and characterization of nonlinear processes. Topics of research include Lyapunov equations, mutual information and metric entropy, the dimensions, complex dynamics and transition sequences and spatial patterns

Impaired Processing of Serial Order Determines Working Memory Impairments in Alzheimer's Disease.

Science.gov (United States)

De Belder, Maya; Santens, Patrick; Sieben, Anne; Fias, Wim

2017-01-01

Working memory (WM) problems are commonly observed in Alzheimer's disease (AD), but the affected mechanisms leading to impaired WM are still insufficiently understood. The ability to efficiently process serial order in WM has been demonstrated to be fundamental to fluent daily life functioning. The decreased capability to mentally process serial position in WM has been put forward as the underlying explanation for generally compromised WM performance. Determine which mechanisms, such as order processing, are responsible for deficient WM functioning in AD. A group of AD patients (n = 32) and their partners (n = 25), assigned to the control group, were submitted to an extensive battery of neuropsychological and experimental tasks, assessing general cognitive state and functioning of several aspects related to serial order WM. The results revealed an impaired ability to bind item information to serial position within WM in AD patients compared to controls. It was additionally observed that AD patients experienced specific difficulties with directing spatial attention when searching for item information stored in WM. The processing of serial order and the allocation of attentional resources are both disrupted, explaining the generally reduced WM functioning in AD patients. Further studies should now clarify whether this observation could explain disease-related problems for other cognitive functions such as verbal expression, auditory comprehension, or planning.

Distributed-Order Dynamic Systems Stability, Simulation, Applications and Perspectives

CERN Document Server

Jiao, Zhuang; Podlubny, Igor

2012-01-01

Distributed-order differential equations, a generalization of fractional calculus, are of increasing importance in many fields of science and engineering from the behaviour of complex dielectric media to the modelling of nonlinear systems. This Brief will broaden the toolbox available to researchers interested in modeling, analysis, control and filtering. It contains contextual material outlining the progression from integer-order, through fractional-order to distributed-order systems. Stability issues are addressed with graphical and numerical results highlighting the fundamental differences between constant-, integer-, and distributed-order treatments. The power of the distributed-order model is demonstrated with work on the stability of noncommensurate-order linear time-invariant systems. Generic applications of the distributed-order operator follow: signal processing and viscoelastic damping of a mass–spring set up. A new general approach to discretization of distributed-order derivatives and integrals ...

Theoretical studies of multistep processes, isospin effects in nuclear scattering, and meson and baryon interactions in nuclear physics. Interim progress report, May 1, 1984-April 30, 1985

International Nuclear Information System (INIS)

Madsen, V.A.; Landau, R.H.

1985-01-01

Progress is briefly described on the following research topics: a theory for proton -3 He scattering, momentum space Dirac equation, atomic and nuclear bound states of kaonic hydrogen and helium, calculation of the absorptive charge-exchange potential, role of higher-order processes in the absorptive optical potential W, the deformation-parameter reversal effect, and interference effect in T/sub i/ (p,n) reactions. Publications are listed. 23 refs

Monte Carlo simulation study of a selforganisation process leading to ordered precipitate structures

International Nuclear Information System (INIS)

Zirkelbach, F.; Haeberlen, M.; Lindner, J.K.N.; Stritzker, B.

2007-01-01

Periodically arranged, selforganised, nanometric, amorphous precipitates have been observed after high-fluence ion implantations into solids for a number of ion/target combinations at certain implantation conditions. A model describing the ordering process based on compressive stress exerted by the amorphous inclusions as a result of the density change upon amorphisation is introduced. A Monte Carlo simulation code, which focuses on high-fluence carbon implantations into silicon, is able to reproduce experimentally observed nanolamella distributions as well as the formation of continuous amorphous layers. By means of simulation, the selforganisation process becomes traceable and detailed information about the compositional and structural state during the ordering process is obtained. Based on simulation results, a recipe is proposed for producing broad distributions of ordered lamellar structures

Out-of-order event processing in kinetic data structures

DEFF Research Database (Denmark)

Abam, Mohammad; de Berg, Mark; Agrawal, Pankaj

2011-01-01

’s for the maintenance of several fundamental structures such as kinetic sorting and kinetic tournament trees, which overcome the difficulty by employing a refined event scheduling and processing technique. We prove that the new event scheduling mechanism leads to a KDS that is correct except for finitely many short......We study the problem of designing kinetic data structures (KDS’s for short) when event times cannot be computed exactly and events may be processed in a wrong order. In traditional KDS’s this can lead to major inconsistencies from which the KDS cannot recover. We present more robust KDS...

Second order evolution inclusions governed by sweeping process in Banach spaces

Directory of Open Access Journals (Sweden)

A. G. Ibrahim

2009-11-01

Full Text Available In this paper we prove two existence theorems concerning the existence of solutions for second order evolution inclusions governed by sweeping process with closed convex sets depending on time and state in Banach spaces. This work extends some recent existence theorems cncerning sweeping process from Hilbert spaces to Banach spaces.

Process development studies on the bioconversion of cellulose and production of ethanol. Progress report, September 1, 1978

Energy Technology Data Exchange (ETDEWEB)

Wilke, C.R.

1978-09-01

Progress is reported in studies on the pretreatment of cellulosic materials to facilitate enzymatic hydrolysis, sulfuric acid hydrolysis, investigation of the Purdue processing scheme including an economic analysis, and the fermentability of the enzymatic hydrolyzate. Progress is also reported on enzyme fermentation studies, hydrolysis reactor development, and utilization of hemicellulose sugars. (JSR)

Recent status and progress of radiation processing in the world

International Nuclear Information System (INIS)

Lee, Yun Jong; Lee, Byoung Hun; Im, Don Sun; Kim, Jae Ho; Nho, Young Chang

2008-01-01

Radiation technology is currently used in a number of industrial processes such as sterilization, cross linking of polymer, food irradiation, rubber vulcanization in the tire manufacturing, contaminated medical waste, etc. Gamma ray and electron beam are the key examples of well-established economical applications of radiation processes. The purpose of this paper is to review the recent technological trends and activities for radiation processes in order for the industrial end users to better understand, and obtain useful information about the technology. It is clear that the radiation processing technology has potential for a variety of the industrial applications

Recent status and progress of radiation processing in the world

Energy Technology Data Exchange (ETDEWEB)

Lee, Yun Jong; Lee, Byoung Hun; Im, Don Sun; Kim, Jae Ho; Nho, Young Chang [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup(Korea, Republic of)

2008-01-15

Radiation technology is currently used in a number of industrial processes such as sterilization, cross linking of polymer, food irradiation, rubber vulcanization in the tire manufacturing, contaminated medical waste, etc. Gamma ray and electron beam are the key examples of well-established economical applications of radiation processes. The purpose of this paper is to review the recent technological trends and activities for radiation processes in order for the industrial end users to better understand, and obtain useful information about the technology. It is clear that the radiation processing technology has potential for a variety of the industrial applications.

Moral Progress: A Present-day Perspective on the Leading Enlightenment Idea

Directory of Open Access Journals (Sweden)

Andrzej Elżanowski

2013-06-01

Full Text Available Most Enlightenment thinkers believed that the World’s order (as ultimately based on divine laws is good and thus every gain of knowledge will have good consequences. Scientific process was assumed to entail moral progress. In fact some moral progress did occur in the Western civilization and science contributed to it, but it is widely incommensurate with the progress of science. The Enlightenment’s concept of a concerted scientific and moral progress proved largely wrong for several reasons. (1 Public morality and science evolve largely independently and may either enhance or inhibit each other. (2 There are no objective values to be read in the World’s order and simply followed. Instead, our real, subjective values and the moral systems they fuel have all been generated and shaped by evolution rather than designed to be universally good, and thus ought to be managed rather than simply followed. (3 Our evolved morality is flawed, deficient, prone to doctrinal manipulation and refractory to progress. (4 The majority of people show metaethical incompetence in failing to take a reasoned critical stand toward the principles and assumptions of received morals. This makes moral progress largely dependent on those who reach metaethical competence by transcending the conventional stages of moral development.

Acid-base behavior in hydrothermal processing of wastes. 1997 annual progress report

International Nuclear Information System (INIS)

1997-01-01

'A major obstacle to the development of hydrothermal technology for treating DOE wastes has been a lack of scientific knowledge of solution chemistry, thermodynamics and transport phenomena. The progress over the last year is highlighted in the following four abstracts from manuscripts which have been submitted to journals. The authors also have made considerable progress on a spectroscopic study of the acid-base equilibria of Cr(VI). They have utilized novel spectroscopic indicators to study acid-base equilibria up to 380 C. Until now, very few systems have been studied at such high temperatures, although this information is vital for hydrothermal processing of wastes. The pH values of aqueous solutions of boric acid and KOH were measured with the optical indicator 2-naphthol at temperatures from 300 to 380 C. The equilibrium constant Kb-l for the reaction B(OH)3 + OH - = B(OH) -4 was determined from the pH measurements and correlated with a modified Born model. The titration curve for the addition of HCl to sodium borate exhibits strong acid-strong base behavior even at 350 C and 24.1 MPa. At these conditions, aqueous solutions of sodium borate buffer the pH at 9.6 t 0.25. submitted to Ind. Eng. Chem. Res. Acetic Acid and HCl Acid-base titrations for the KOH-acetic acid or NH 3 -acetic acid systems were monitored with the optical indicator 2-naphthoic acid at 350 C and 34 MPa, and those for the HCl;Cl- system with acridine at 380 C and up to 34 MPa (5,000 psia ). KOH remains a much stronger base than NH,OH at high temperature. From 298 K to the critical temperature of water, the dissociation constant for HCl decreases by 13 orders of magnitude, and thus, the basicity of Cl - becomes significant. Consequently, the addition of NaCl to HCl raises the pH. The pH titration curves may be predicted with reasonable accuracy from the relevant equilibrium constants and Pitzer''s formulation of the Debye- Htickel equation for the activity coefficients.'

Symbol manipulation by computer applied to plasma physics. Technical progress report 2

International Nuclear Information System (INIS)

Rosen, B.

1977-09-01

Progress has been made in automating the calculation of parametric processes analytically by computer. The computations are performed automatically to lowest order quickly and efficiently. Work has started on a method for solving the nonlinear differential equations describing interacting modes

Information management: The adoption of order processing for B2B e-commerce

Directory of Open Access Journals (Sweden)

F. W. Voges

2007-11-01

Full Text Available The management of information flow in the order processing activities of small enterprises is not always understood. An inefficient supply chain is often the result of the lack of timely and accessible inter-firm information and data exchange. Small suppliers often do not have the technology infrastructure and capable resources available for proper integration with supply chains. This research investigated suppliers and fast moving consumer goods (FMCG retailers, adopting business-to-business (B2B e-commerce. Small businesses are the focus of this research, as they contribute to a large portion of the South African economy and play an important role in the supply chains of retailers. Case study research using evidence obtained from nine small, medium and micro enterprises (SMMEs and suppliers located in the Western Cape, South Africa, was used. It was found that small suppliers have different processes for conducting business with various retailers. Literature revealed little evidence of using the Internet as an enabling technology in on-line order processing. From the analysis, nine improvement areas were identified to enhance the conduct of efficient B2B order processing and associated information flow. These improvement areas were merged with four factors that were identified in a framework when adopting e-supply chains. This resulted in the proposition of guidelines for small suppliers when adopting B2B e-commerce for order processing.

Measuring and reporting on decommissioning progress

International Nuclear Information System (INIS)

Lange, B.A.

2006-01-01

One of the challenges facing AECL, as well as other organizations charged with the responsibility of decommissioning nuclear facilities, is the means by which to measure and report on decommissioning progress to various audiences which, in some cases, may only have a peripheral knowledge or understanding of the complexities associated with the decommissioning process. The reporting and measurement of decommissioning progress is important for a number of reasons, i.e., It provides a vehicle by which to effectively communicate the nature of the decommissioning process; It ensures that stakeholders and shareholders are provided with a transparent and understandable means for assessing value for money; It provides a means by which to integrate the planning, measurement, and operational aspects of decommissioning One underlying reason behind the challenge of reporting decommissioning progress lies in the fact that decommissioning programs are generally executed over periods of time that far exceed those generally associated with typical design and build projects. For example, a decommissioning program could take decades to complete in which case progress on the order of a few percent in any one year might be typical. However, such progress may appear low compared to that seen with more typical projects that can be completed in a matter of years. As a consequence, AECL undertook to develop a system by which to measure decommissioning progress in a straightforward, meaningful, and understandable fashion. The system is not rigorously objective, and there are subjective aspects that are necessitated by the need to keep the system readily understandable. It is also important to note that while the system is simple in concept, there is, nonetheless, significant effort involved in generating and updating the parameters used as input, and in the actual calculations. (author)

Variational methods for high-order multiphoton processes

International Nuclear Information System (INIS)

Gao, B.; Pan, C.; Liu, C.; Starace, A.F.

1990-01-01

Methods for applying the variationally stable procedure for Nth-order perturbative transition matrix elements of Gao and Starace [Phys. Rev. Lett. 61, 404 (1988); Phys. Rev. A 39, 4550 (1989)] to multiphoton processes involving systems other than atomic H are presented. Three specific cases are discussed: one-electron ions or atoms in which the electron--ion interaction is described by a central potential; two-electron ions or atoms in which the electronic states are described by the adiabatic hyperspherical representation; and closed-shell ions or atoms in which the electronic states are described by the multiconfiguration Hartree--Fock representation. Applications are made to the dynamic polarizability of He and the two-photon ionization cross section of Ar

The Neural Mechanisms of Word Order Processing Revisited: Electrophysiological Evidence from Japanese

Science.gov (United States)

Wolff, Susann; Schlesewsky, Matthias; Hirotani, Masako; Bornkessel-Schlesewsky, Ina

2008-01-01

We present two ERP studies on the processing of word order variations in Japanese, a language that is suited to shedding further light on the implications of word order freedom for neurocognitive approaches to sentence comprehension. Experiment 1 used auditory presentation and revealed that initial accusative objects elicit increased processing…

A clinical data warehouse-based process for refining medication orders alerts.

Science.gov (United States)

Boussadi, Abdelali; Caruba, Thibaut; Zapletal, Eric; Sabatier, Brigitte; Durieux, Pierre; Degoulet, Patrice

2012-01-01

The objective of this case report is to evaluate the use of a clinical data warehouse coupled with a clinical information system to test and refine alerts for medication orders control before they were fully implemented. A clinical decision rule refinement process was used to assess alerts. The criteria assessed were the frequencies of alerts for initial prescriptions of 10 medications whose dosage levels depend on renal function thresholds. In the first iteration of the process, the frequency of the 'exceeds maximum daily dose' alerts was 7.10% (617/8692), while that of the 'under dose' alerts was 3.14% (273/8692). Indicators were presented to the experts. During the different iterations of the process, 45 (16.07%) decision rules were removed, 105 (37.5%) were changed and 136 new rules were introduced. Extensive retrospective analysis of physicians' medication orders stored in a clinical data warehouse facilitates alert optimization toward the goal of maximizing the safety of the patient and minimizing overridden alerts.

Improved Student Reasoning About Carbon-Transforming Processes Through Inquiry-Based Learning Activities Derived from an Empirically Validated Learning Progression

Science.gov (United States)

JW, Schramm; Jin, H.; Keeling, EG; Johnson, M.; Shin, HJ

2017-05-01

This paper reports on our use of a fine-grained learning progression to assess secondary students' reasoning through carbon-transforming processes (photosynthesis, respiration, biosynthesis). Based on previous studies, we developed a learning progression with four progress variables: explaining mass changes, explaining energy transformations, explaining subsystems, and explaining large-scale systems. For this study, we developed a 2-week teaching module integrating these progress variables. Students were assessed before and after instruction, with the learning progression framework driving data analysis. Our work revealed significant overall learning gains for all students, with the mean post-test person proficiency estimates higher by 0.6 logits than the pre-test proficiency estimates. Further, instructional effects were statistically similar across all grades included in the study (7th-12th) with students in the lowest third of initial proficiency evidencing the largest learning gains. Students showed significant gains in explaining the processes of photosynthesis and respiration and in explaining transformations of mass and energy, areas where prior research has shown that student misconceptions are prevalent. Student gains on items about large-scale systems were higher than with other variables (although absolute proficiency was still lower). Gains across each of the biological processes tested were similar, despite the different levels of emphasis each had in the teaching unit. Together, these results indicate that students can benefit from instruction addressing these processes more explicitly. This requires pedagogical design quite different from that usually practiced with students at this level.

Anthesis, the infectious process and disease progress curves for fusarium head blight in wheat

Directory of Open Access Journals (Sweden)

Erlei Melo Reis

2016-06-01

Full Text Available ABSTRACT Fusarium head blight of wheat (Triticum aestivum, caused by the fungus Gibberella zeae, is a floral infecting disease that causes quantitative and qualitative losses to winter cereals. In Brazil, the sanitary situation of wheat has led to research in order to develop strategies for sustainable production, even under adverse weather conditions. To increase the knowledge of the relationship among the presence of anthesis, the infectious process, the disease progress and the saprophytic fungi present in wheat anthers, studies were conducted in the experimental field of University of Passo Fundo (UPF, using the cultivar Marfim, in the 2011 growing season. The disease incidence in spikes and spikelets was evaluated. The presence of exserted anthers increased the spike exposure time to the inoculum. The final incidence of fusarium head blight, in the field, was dependent on the presence of exserted anthers. The disease followed an aggregation pattern and its evolution increased with time, apparently showing growth according to secondary cycles. The fungi isolated from exserted anthers (Alternaria sp., Fusarium sp., Drechslera spp. and Epicoccum sp. did not compete for the infection site of fusarium head blight in wheat, not interfering with the incidence of F. graminearum.

The influence of context on word order processing - an fMRI study

DEFF Research Database (Denmark)

Kristensen, Line Burholt; Engberg-Pedersen, Elisabeth; Nielsen, Andreas Højlund

2013-01-01

In languages that have subject-before-object as their canonical word order, e.g. German, English and Danish, behavioral experiments have shown more processing difficulties for object-initial clauses (OCs) than for subject-initial clauses (SCs). For processing of OCs in such languages, neuroimagin...

Progress of the decommissioning process of Musashi Institute of Technology reactor (4)

International Nuclear Information System (INIS)

Uchiyama, Takafumi; Tanzawa, Tomio; Mitsuhashi, Ishi; Morishima, Kayoko; Matsumoto, Tetsuo

2012-01-01

The research reactor of Tokyo City University Atomic Energy Research Laboratory (Musashi Institute of Technology reactor) is zirconium-moderated water-cooled solid homogeneous type (TRIGA-II type), and its maximum heat output is 100 kW. It got into the first critical state in January 1963, and since then, it has mainly contributed to education and training for upgrading nuclear engineers, radioactivation analysis and reactor physics, and medical researches, as the joint usage research facilities across Japan. Then, after a long-term suspension, the university submitted the file in 2004 to the Ministry of Education, Culture, Sports, Science and Technology on the dismantling for the purpose of facility abolishment. Through the procedure of submitting a decommissioning plan, it was approved. Furthermore, in order to perform the function stop of the disposal facilities of liquid waste, application for change authorization for the decommissioning plan was submitted and approved. Regarding the progress of the decommissioning plan, the dismantling and removal of waste facilities for liquid waste and solid waste was carried out in FY2011 without any trouble. This paper explains this progress and future work plans. (A.O.)

Dynamics of ordering processes in annealed dilute systems: Island formation, vacancies at domain boundaries, and compactification

DEFF Research Database (Denmark)

Shah, Peter Jivan; Mouritsen, Ole G.

1990-01-01

The dynamics of the ordering processes in two-dimensional lattice models with annealed vacancies and nonconserved order parameter is studied as a function of temperature and vacancy concentration by means of Monte Carlo temperature-quenching simulations. The models are Ising antiferromagnets...... with couplings leading to twofold-degenerate as well as fourfold-degenerate ordering. The models are quenched into a phase-separation region, which makes it possible for both types of ordering to observe the following scenario of ordering processes: (i) early-time nucleation and growth of ordered domains, (ii......) intermediate-time trapping of the mobile vacancies at the domain boundaries, and (iii) late-time diffusion of vacancies along the domain-boundary network towards the surface. In the case of high dilution, the ordering processes correspond to early-time island formation and late-time coarsening...

Classical higher-order processes

DEFF Research Database (Denmark)

Montesi, Fabrizio

2017-01-01

Classical Processes (CP) is a calculus where the proof theory of classical linear logic types processes à la Π-calculus, building on a Curry-Howard correspondence between session types and linear propositions. We contribute to this research line by extending CP with process mobility, inspired by ...

Relaxation processes in a lower disorder order transition diblock copolymer

International Nuclear Information System (INIS)

Sanz, Alejandro; Ezquerra, Tiberio A.; Nogales, Aurora; Hernández, Rebeca; Sprung, Michael

2015-01-01

The dynamics of lower disorder-order temperature diblock copolymer leading to phase separation has been observed by X ray photon correlation spectroscopy. Two different modes have been characterized. A non-diffusive mode appears at temperatures below the disorder to order transition, which can be associated to compositional fluctuations, that becomes slower as the interaction parameter increases, in a similar way to the one observed for diblock copolymers exhibiting phase separation upon cooling. At temperatures above the disorder to order transition T ODT , the dynamics becomes diffusive, indicating that after phase separation in Lower Disorder-Order Transition (LDOT) diblock copolymers, the diffusion of chain segments across the interface is the governing dynamics. As the segregation is stronger, the diffusive process becomes slower. Both observed modes have been predicted by the theory describing upper order-disorder transition systems, assuming incompressibility. However, the present results indicate that the existence of these two modes is more universal as they are present also in compressible diblock copolymers exhibiting a lower disorder-order transition. No such a theory describing the dynamics in LDOT block copolymers is available, and these experimental results may offer some hints to understanding the dynamics in these systems. The dynamics has also been studied in the ordered state, and for the present system, the non-diffusive mode disappears and only a diffusive mode is observed. This mode is related to the transport of segment in the interphase, due to the weak segregation on this system

Ling classification describes endoscopic progressive process of achalasia and successful peroral endoscopy myotomy prevents endoscopic progression of achalasia.

Science.gov (United States)

Zhang, Wen-Gang; Linghu, En-Qiang; Chai, Ning-Li; Li, Hui-Kai

2017-05-14

To verify the hypothesis that the Ling classification describes the endoscopic progressive process of achalasia and determine the ability of successful peroral endoscopic myotomy (POEM) to prevent endoscopic progression of achalasia. We retrospectively reviewed the endoscopic findings, symptom duration, and manometric data in patients with achalasia. A total of 359 patients (197 women, 162 men) with a mean age of 42.1 years (range, 12-75 years) were evaluated. Symptom duration ranged from 2 to 360 mo, with a median of 36 mo. Patients were classified with Ling type I ( n = 119), IIa ( n = 106), IIb ( n = 60), IIc ( n = 60), or III ( n = 14), according to the Ling classification. Of the 359 patients, 349 underwent POEM, among whom 21 had an endoscopic follow-up for more than 2 years. Pre-treatment and post-treatment Ling classifications of these 21 patients were compared. Symptom duration increased significantly with increasing Ling classification (from I to III) ( P achalasia and may be able to serve as an endoscopic assessment criterion for achalasia. Successful POEM (Eckardt score ≤ 3) seems to have the ability to prevent endoscopic evolvement of achalasia. However, studies with larger populations are warranted to confirm our findings.

Structure/Processing Relationships of Highly Ordered Lead Salt Nanocrystal Superlattices

KAUST Repository

Hanrath, Tobias; Choi, Joshua J.; Smilgies, Detlef-M.

2009-01-01

We investigated the influence of processing conditions, nanocrystal/substrate interactions and solvent evaporation rate on the ordering of strongly interacting nanocrystals by synergistically combining electron microscopy and synchrotron-based small-angle X-ray scattering analysis. Spin-cast PbSe nanocrystal films exhibited submicrometer-sized supracrystals with face-centered cubic symmetry and (001)s planes aligned parallel to the substrate. The ordering of drop-cast lead salt nanocrystal films was sensitive to the nature of the substrate and solvent evaporation dynamics. Nanocrystal films drop-cast on rough indium tin oxide substrates were polycrystalline with small grain size and low degree of orientation with respect to the substrate, whereas films drop-cast on flat Si substrates formed highly ordered face-centered cubic supracrystals with close-packed (111)s planes parallel to the substrate. The spatial coherence of nanocrystal films drop-cast in the presence of saturated solvent vapor was significantly improved compared to films drop-cast in a dry environment. Solvent vapor annealing was demonstrated as a postdeposition technique to modify the ordering of nanocrystals in the thin film. Octane vapor significantly improved the long-range order and degree of orientation of initially disordered or polycrystalline nanocrystal assemblies. Exposure to 1,2-ethanedithiol vapor caused partial displacement of surface bound oleic acid ligands and drastically degraded the degree of order in the nanocrystal assembly. © 2009 American Chemical Society.

Structure/Processing Relationships of Highly Ordered Lead Salt Nanocrystal Superlattices

KAUST Repository

Hanrath, Tobias

2009-10-27

We investigated the influence of processing conditions, nanocrystal/substrate interactions and solvent evaporation rate on the ordering of strongly interacting nanocrystals by synergistically combining electron microscopy and synchrotron-based small-angle X-ray scattering analysis. Spin-cast PbSe nanocrystal films exhibited submicrometer-sized supracrystals with face-centered cubic symmetry and (001)s planes aligned parallel to the substrate. The ordering of drop-cast lead salt nanocrystal films was sensitive to the nature of the substrate and solvent evaporation dynamics. Nanocrystal films drop-cast on rough indium tin oxide substrates were polycrystalline with small grain size and low degree of orientation with respect to the substrate, whereas films drop-cast on flat Si substrates formed highly ordered face-centered cubic supracrystals with close-packed (111)s planes parallel to the substrate. The spatial coherence of nanocrystal films drop-cast in the presence of saturated solvent vapor was significantly improved compared to films drop-cast in a dry environment. Solvent vapor annealing was demonstrated as a postdeposition technique to modify the ordering of nanocrystals in the thin film. Octane vapor significantly improved the long-range order and degree of orientation of initially disordered or polycrystalline nanocrystal assemblies. Exposure to 1,2-ethanedithiol vapor caused partial displacement of surface bound oleic acid ligands and drastically degraded the degree of order in the nanocrystal assembly. © 2009 American Chemical Society.

Next to leading order evolution of SIDIS processes in the forward region

International Nuclear Information System (INIS)

Daleo, A.; Sassot, R.

2003-01-01

We compute the order α s 2 quark initiated corrections to semi-inclusive deep inelastic scattering extending the approach developed recently for the gluon contributions. With these corrections we complete the order α s 2 QCD description of these processes, verifying explicitly the factorization of collinear singularities. We also obtain the corresponding NLO evolution kernels, relevant for the scale dependence of fracture functions. We compare the non-homogeneous evolution effects driven by these kernels with those obtained at leading order accuracy and discuss their phenomenological implications

International Symposium on Dynamics of Ordering Processes in Condensed Matter

CERN Document Server

Furukawa, H

1988-01-01

The International Symposium on Dynamics of Ordering Processes in Condensed Matter was held at the Kansai Seminar House, Kyoto, for four days, from 27 to 30 August 1987, under the auspices of the Physical Soci­ ety of Japan. The symposium was financially supported by the four orga­ nizations and 45 companies listed on other pages in this volume. We are very grateful to all of them and particularly to the greatest sponsor, the Commemorative Association for the Japan World Exposition 1970. A total Df 22 invited lectures and 48 poster presentations were given and 110 participants attended from seven nations. An objective of the Symposium was to review and extend our present understanding of the dynamics of ordering processes in condensed matters, (for example, alloys, polymers and fluids), that are brought to an un­ stable state by sudden change of such external parameters as temperature and pressure. A second objective, no less important, was to identify new fields of science that might be investigated by sim...

The Implications of the European Integration Process of Kosovo's Constitutional Order

Directory of Open Access Journals (Sweden)

Flamur Hyseni

2017-08-01

Full Text Available In this article I have analyzed and studied on what are the implications of the European integration process of Kosovo’s constitutional order and how much of institutional order Kosovo has, also how much of the effects of the European integration process has used. I’ve made a brief analysis of the establishment of the constitutional order of Kosovo in the former federal state of Yugoslavia and establishment of Kosovo under international administration. However an analyze and more detailed study I’ve made on the first report of contracting between Kosovo and EU, Stabilization and Association Agreement which will be implemented in Kosovo through the National Program for the Implementation of the Stabilization and Association Agreement that was approved by the Government on 16 December 2015 and by the Assembly on 10 March 2016. The other aspect of the study and analysis in this article is the study of acts to protect the territorial integrity of Kosovo, which are: 12244/99 resolution of the UN Security Council, Constitutional Framework for Provisional Self- Government in Kosovo, 16 May 2001, Declaration of Independence, 17 February 2008 and the Constitution of the Republic of Kosovo, 09 April 2008.

Annual progress report

International Nuclear Information System (INIS)

Russek, A.

1975-06-01

Progress has been made in calculation of cross-sections for dielectronic and radiative recombination when hot electrons are incident on partially stripped impurity ions. Calculations were completed for the cases of 1 keV and 10 keV electrons incident on ions of arbitrary Z with ionization state consistent with a 1 keV plasma temperature. It was found that dielectronic recombination dominates radiative recombination by a factor of 100 at 1 keV incident electron energy to a factor of 1000 at 10 keV incident electron energy. The work is now being extended to other plasma temperatures and is being improved by more accurate calculation of the matrix elements involved. Progress was also made in the calculation of accurate bremsstrahlung and higher order radiative processes which also occur when hot electrons are incident on partially stripped impurity ions. Formal expressions for the matrix elements have been obtained for cross-sections in a fully relativistic partial wave analysis for bremsstrahlung radiation both with and without electron excitation of the target ion. Final evaluation now awaits the evaluation of the relativistic radial integrals involved in these matrix elements. (U.S.)

On the fragility of fractional-order PID controllers for FOPDT processes.

Science.gov (United States)

Padula, Fabrizio; Visioli, Antonio

2016-01-01

This paper analyzes the fragility issue of fractional-order proportional-integral-derivative controllers applied to integer first-order plus-dead-time processes. In particular, the effects of the variations of the controller parameters on the achieved control system robustness and performance are investigated. Results show that this kind of controllers is more fragile with respect to the standard proportional-integral-derivative controllers and therefore a significant attention should be paid by the user in their tuning. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Synthesis of highly ordered nanopores on alumina by two-step anodization process

Energy Technology Data Exchange (ETDEWEB)

Bwana, Nicholas N. [University of Oxford, Department of Engineering Science (United Kingdom)], E-mail: Nicholas.Bwana@eng.ox.ac.uk

2008-02-15

Highly ordered anodic alumina was produced, on RF sputtered aluminium on a conductive glass substrate, by two step anodizing process in 0.4 M sulphuric acid at constant cell potentials of between 5 and 25 V and at a constant current density of 20 mA cm{sup -2}. The temperature was kept constant at 15 deg. C during both anodization processes. The effects of the anodizing potential, current density, and time on the pore diameters were established. Longer anodization periods result in wider irregular pores with reduced porosity for both constant potential and constant current density anodization processes. The current density increases with increasing constant anodizing potential and generally remains constant with time after a sharp rise. Potential drop during constant current density anodization behaves in a similar manner. We confirm that sulphuric acid has a self-ordering potential of 25 V above which burning occurs.

Theory of high-energy-collision processes. Technical progress report, January 1-December 31, 1981

International Nuclear Information System (INIS)

1982-01-01

Progress is described in the following areas: (1) several years ago, surprisingly simple expressions were obtained for the differential cross sections of e + e - → μ + μ - γ and e + e - → e + e - γ at high energies. Such simple expressions were generalized to twelve other similar radiative processes in QED and QCD. Afterwards, it was found that these results can be derived easily with the help of helicity amplitudes. This method is being investigated for many other radiative processes; (2) in the two-dimensional Ising model, the horizontal and vertical interaction energies are usually taken to be different. When this idea of different interactions in different directions is applied to the Z 2 lattice gauge theory in four dimensions, a limiting case is found which is exactly solvable. Contrary to numerical calculations at the symmetry point, the phase transition is found to be of second order; (3) on the subject of supersymmetry, general helicity and spin sum rules were obtained for massless and massive supermultiplets, and a functional integral approach was found as a natural setting for Witten's criterion for the occurrence of dynamic symmetry breaking of supersymmetry. A systematic and exhaustive analysis of explicit soft breaking of global supersymmetry has also been carried out using the methods of superfields; (4) the renormalization of the massless Thirring model in the neighborhood of g = -π/2 was studied. The results are consistent with those found previously by placing the model on a lattice; and (5) in studying the effect of laboratory temperature on scattering processes, it was found that transport phenomena play an important role. As a preparation for this study, an exactly solvable case of the nonlinear Boltzmann equation has been found and studied

Motor Speech Phenotypes of Frontotemporal Dementia, Primary Progressive Aphasia, and Progressive Apraxia of Speech

Science.gov (United States)

Poole, Matthew L.; Brodtmann, Amy; Darby, David; Vogel, Adam P.

2017-01-01

Purpose: Our purpose was to create a comprehensive review of speech impairment in frontotemporal dementia (FTD), primary progressive aphasia (PPA), and progressive apraxia of speech in order to identify the most effective measures for diagnosis and monitoring, and to elucidate associations between speech and neuroimaging. Method: Speech and…

Using process elicitation and validation to understand and improve chemotherapy ordering and delivery.

Science.gov (United States)

Mertens, Wilson C; Christov, Stefan C; Avrunin, George S; Clarke, Lori A; Osterweil, Leon J; Cassells, Lucinda J; Marquard, Jenna L

2012-11-01

Chemotherapy ordering and administration, in which errors have potentially severe consequences, was quantitatively and qualitatively evaluated by employing process formalism (or formal process definition), a technique derived from software engineering, to elicit and rigorously describe the process, after which validation techniques were applied to confirm the accuracy of the described process. The chemotherapy ordering and administration process, including exceptional situations and individuals' recognition of and responses to those situations, was elicited through informal, unstructured interviews with members of an interdisciplinary team. The process description (or process definition), written in a notation developed for software quality assessment purposes, guided process validation (which consisted of direct observations and semistructured interviews to confirm the elicited details for the treatment plan portion of the process). The overall process definition yielded 467 steps; 207 steps (44%) were dedicated to handling 59 exceptional situations. Validation yielded 82 unique process events (35 new expected but not yet described steps, 16 new exceptional situations, and 31 new steps in response to exceptional situations). Process participants actively altered the process as ambiguities and conflicts were discovered by the elicitation and validation components of the study. Chemotherapy error rates declined significantly during and after the project, which was conducted from October 2007 through August 2008. Each elicitation method and the subsequent validation discussions contributed uniquely to understanding the chemotherapy treatment plan review process, supporting rapid adoption of changes, improved communication regarding the process, and ensuing error reduction.

Cavitational hydrothermal oxidation: A new remediation process. Annual progress report, September 1996 - August 1997

International Nuclear Information System (INIS)

Suslick, K.S.

1997-01-01

'During the past year, the authors have continued to make substantial scientific progress on the understanding of cavitation phenomena in aqueous media and applications of cavitation to remediation processes. The efforts have focused on three separate areas: sonoluminescence as a probe of conditions created during cavitational collapse in aqueous media, the use of cavitation for remediation of contaminated water, and an addition of the use of ultrasound in the synthesis of novel heterogeneous catalysts for hydrodehalogenation of halocarbons under mild conditions. In order to gain further understanding of the conditions present during cavitation, the author has continued his studies of sonoluminescence. He has made recent breakthroughs in the use of emission spectroscopy for temperature and pressure measurement of cavitation events, which he expects to publish shortly. He has been able to measure for the first time the temperature of cavitation in water during multi-bubble cavitation in the presence of aromatic hydrocarbons. The emission from excited states of C 2 in water gives temperatures that are consistent with adiabatic compressional heating, with maximum temperatures of 4,300 K. Prior measurements of cavitation temperatures in low vapor pressure nonaqueous media gave somewhat higher temperatures of 5,000 K. This work lays permanently to rest exotic mechanisms for cavitational chemistry, at least for cavitation fields.'

New type of ordering process with volume change of molecules in the spin-crossover transition, and its new aspects of dynamical processes

Science.gov (United States)

Miyashita, Seiji; Nishino, Masamichi; Konishi, Yusuke; Tokoro, Hiroko; Boukheddaden, Kamel; Varret, François; Rikvold, Per Arne

2009-02-01

Bistability between the high- and low-spin states in spin-crossover materials provides a complex temperature dependence of the ordering processes. Thermodynamic properties of the ordering phenomena were studied in a unified way, and a generic structure of the ordering processes was proposed. The origin of the interaction among the spins was also discussed, and a new mechanism based on an elastic interaction among distortions due to the volume of a molecule depending on its spin state was also proposed. With this mechanism, the typical pressure dependence of the ordering processes can be reproduced. Moreover, we studied the type of criticality of the phase transition and pointed out that the present model possesses critical behaviour belonging to the mean-field universality class. There, the spin-spin correlation function is constant at long distances and does not show an exponential decay in contrast to short-range models. It is also pointed out that the model with periodic boundary conditions does not show ordering clusters, even near the critical point or in the process of spinodal decomposition. This indicates that critical opalescence would not be observed in this model. No cluster appears, either in photo-excitation process from the low-spin state at low temperatures. On the other hand, with open boundary conditions, the system shows a cluster structure. The effects of the boundary conditions are also discussed.

Evolution of lateral ordering in symmetric block copolymer thin films upon rapid thermal processing

International Nuclear Information System (INIS)

Ceresoli, Monica; Ferrarese Lupi, Federico; Seguini, Gabriele; Perego, Michele; Sparnacci, Katia; Gianotti, Valentina; Antonioli, Diego; Laus, Michele; Boarino, Luca

2014-01-01

This work reports experimental findings about the evolution of lateral ordering of lamellar microdomains in symmetric PS-b-PMMA thin films on featureless substrates. Phase separation and microdomain evolution are explored in a rather wide range of temperatures (190–340 °C) using a rapid thermal processing (RTP) system. The maximum processing temperature that enables the ordering of block copolymers without introducing any significant degradation of macromolecules is identified. The reported results clearly indicate that the range of accessible temperatures in the processing of these self-assembling materials is mainly limited by the thermal instability of the grafted random copolymer layer, which starts to degrade at T > 300 °C, inducing detachment of the block copolymer thin film. For T ⩽ 290 °C, clear dependence of correlation length (ξ) values on temperature is observed. The highest level of lateral order achievable in the current system in a quasi-equilibrium condition was obtained at the upper processing temperature limit after an annealing time as short as 60 s. (paper)

Predicting perceptual learning from higher-order cortical processing.

Science.gov (United States)

Wang, Fang; Huang, Jing; Lv, Yaping; Ma, Xiaoli; Yang, Bin; Wang, Encong; Du, Boqi; Li, Wu; Song, Yan

2016-01-01

Visual perceptual learning has been shown to be highly specific to the retinotopic location and attributes of the trained stimulus. Recent psychophysical studies suggest that these specificities, which have been associated with early retinotopic visual cortex, may in fact not be inherent in perceptual learning and could be related to higher-order brain functions. Here we provide direct electrophysiological evidence in support of this proposition. In a series of event-related potential (ERP) experiments, we recorded high-density electroencephalography (EEG) from human adults over the course of learning in a texture discrimination task (TDT). The results consistently showed that the earliest C1 component (68-84ms), known to reflect V1 activity driven by feedforward inputs, was not modulated by learning regardless of whether the behavioral improvement is location specific or not. In contrast, two later posterior ERP components (posterior P1 and P160-350) over the occipital cortex and one anterior ERP component (anterior P160-350) over the prefrontal cortex were progressively modified day by day. Moreover, the change of the anterior component was closely correlated with improved behavioral performance on a daily basis. Consistent with recent psychophysical and imaging observations, our results indicate that perceptual learning can mainly involve changes in higher-level visual cortex as well as in the neural networks responsible for cognitive functions such as attention and decision making. Copyright © 2015 Elsevier Inc. All rights reserved.

Progress in centralised ethics review processes: Implications for multi-site health evaluations.

Science.gov (United States)

Prosser, Brenton; Davey, Rachel; Gibson, Diane

2015-04-01

Increasingly, public sector programmes respond to complex social problems that intersect specific fields and individual disciplines. Such responses result in multi-site initiatives that can span nations, jurisdictions, sectors and organisations. The rigorous evaluation of public sector programmes is now a baseline expectation. For evaluations of large and complex multi-site programme initiatives, the processes of ethics review can present a significant challenge. However in recent years, there have been new developments in centralised ethics review processes in many nations. This paper provides the case study of an evaluation of a national, inter-jurisdictional, cross-sector, aged care health initiative and its encounters with Australian centralised ethics review processes. Specifically, the paper considers progress against the key themes of a previous five-year, five nation study (Fitzgerald and Phillips, 2006), which found that centralised ethics review processes would save time, money and effort, as well as contribute to more equitable workloads for researchers and evaluators. The paper concludes with insights for those charged with refining centralised ethics review processes, as well as recommendations for future evaluators of complex multi-site programme initiatives. Copyright © 2015 Elsevier Ltd. All rights reserved.

Parallel Processing of Big Point Clouds Using Z-Order Partitioning

Science.gov (United States)

Alis, C.; Boehm, J.; Liu, K.

2016-06-01

As laser scanning technology improves and costs are coming down, the amount of point cloud data being generated can be prohibitively difficult and expensive to process on a single machine. This data explosion is not only limited to point cloud data. Voluminous amounts of high-dimensionality and quickly accumulating data, collectively known as Big Data, such as those generated by social media, Internet of Things devices and commercial transactions, are becoming more prevalent as well. New computing paradigms and frameworks are being developed to efficiently handle the processing of Big Data, many of which utilize a compute cluster composed of several commodity grade machines to process chunks of data in parallel. A central concept in many of these frameworks is data locality. By its nature, Big Data is large enough that the entire dataset would not fit on the memory and hard drives of a single node hence replicating the entire dataset to each worker node is impractical. The data must then be partitioned across worker nodes in a manner that minimises data transfer across the network. This is a challenge for point cloud data because there exist different ways to partition data and they may require data transfer. We propose a partitioning based on Z-order which is a form of locality-sensitive hashing. The Z-order or Morton code is computed by dividing each dimension to form a grid then interleaving the binary representation of each dimension. For example, the Z-order code for the grid square with coordinates (x = 1 = 012, y = 3 = 112) is 10112 = 11. The number of points in each partition is controlled by the number of bits per dimension: the more bits, the fewer the points. The number of bits per dimension also controls the level of detail with more bits yielding finer partitioning. We present this partitioning method by implementing it on Apache Spark and investigating how different parameters affect the accuracy and running time of the k nearest neighbour algorithm

Flow time prediction for a single-server order picking workstation using aggregate process times

NARCIS (Netherlands)

Andriansyah, R.; Etman, L.F.P.; Rooda, J.E.

2010-01-01

In this paper we propose a simulation modeling approach based on aggregate process times for the performance analysis of order picking workstations in automated warehouses. The aggregate process time distribution is calculated from tote arrival and departure times. We refer to the aggregate process

Improving the process of progressive preliming in sugar production

Directory of Open Access Journals (Sweden)

V. A. Golybin

2016-01-01

Full Text Available Tasks progressive preliming are to conduct neutralization, coagulation, deposition of non-sugars, the formation of a precipitate structure. This is the first operation of physical and chemical cleaning of the raw juice in the case of it in optimum conditions enables the coagulation and transferred to precipitate a substantial portion of high-molecular non-sugars, poorly soluble calcium salts that provides the cleaning effect of 14–18%, that is, up to half of the total effect on the whole station lime-carbon dioxide purification. The results preliming felt not only on the properties of the filtration of the carbonated juices, but a lso on the quality of performance of all intermediates and produced of sugar, in particular the color and turbidity of an aqueous solution, the content of the ash. In our investigations using the raw juice from sugar beet low quality found that when a uniform progressi ve change in pH of the juice during warm preliming best results for deposition rate and volume solids of the resulting precipitate are achieved when the length of 7 to 10 minutes. If it increases to 15 minutes and further reduced the deposition rate of the solid phase with a significant increase in turbidity decantate. It found that as a result of excess visit a large part of the raw juice in a progressive preliming at 60 °C increase in color prelimed juice was 30–55%, which is in agreement with the calculated values decay reducing agents in alkaline solution and formation of any additional colorants. The results confirming the feasibility of the use preddefekatsionnoy for processing the raw juice of condensed carbonate refunds.

Monte Carlos of the new generation: status and progress

International Nuclear Information System (INIS)

Frixione, Stefano

2005-01-01

Standard parton shower monte carlos are designed to give reliable descriptions of low-pT physics. In the very high-energy regime of modern colliders, this is may lead to largely incorrect predictions of the basic reaction processes. This motivated the recent theoretical efforts aimed at improving monte carlos through the inclusion of matrix elements computed beyond the leading order in QCD. I briefly review the progress made, and discuss bottom production at the Tevatron

Progress as Compositional Lock-Freedom

DEFF Research Database (Denmark)

Carbone, Marco; Dardha, Ornela; Montesi, Fabrizio

2014-01-01

A session-based process satisfies the progress property if its sessions never get stuck when it is executed in an adequate context. Previous work studied how to define progress by introducing the notion of catalysers, execution contexts generated from the type of a process. In this paper, we refine...... such definition to capture a more intuitive notion of context adequacy for checking progress. Interestingly, our new catalysers lead to a novel characterisation of progress in terms of the standard notion of lock-freedom. Guided by this discovery, we also develop a conservative extension of catalysers that does...

Nature of capillary condensation and evaporation processes in ordered porous materials.

Science.gov (United States)

Grosman, Annie; Ortega, Camille

2005-11-08

We report on a detailed experimental study of capillary condensation-evaporation processes of N(2) in ordered mesoporous SBA-15 silica. We have carried out measurements of boundary hysteresis loops, reversal curves, and subloops in order to test whether this material behaves as an assembly of independent cylindrical pores open at both ends. With these data, we come to the conclusion that, whereas the boundary hysteresis loop has the classical shape of type H1 associated with condensation-evaporation in cylindrical pores open at both ends, the capillary evaporation does not take place at equilibrium as it is generally assumed. Moreover, the pores do not desorb independently of one another.

Development of cognitive processing and judgments of knowledge in medical students : Analysis of progress test results

NARCIS (Netherlands)

Cecilio-Fernandes, Dario; Kerdijk, Wouter; Jaarsma, A. D. (Debbie) C.; Tio, Rene A.

2016-01-01

BACKGROUND: Beside acquiring knowledge, medical students should also develop the ability to apply and reflect on it, requiring higher-order cognitive processing. Ideally, students should have reached higher-order cognitive processing when they enter the clinical program. Whether this is the case, is

Recent progress in thin film processing by magnetron sputtering with plasma diagnostics

International Nuclear Information System (INIS)

Han, Jeon G

2009-01-01

The precise control of the structure and related properties becomes crucial for sophisticated applications of thin films deposited by magnetron sputtering in emerging industries including the flat panel display, digital electronics and nano- and bio-industries. The film structure is closely related to the total energy delivered to the substrate surface for nucleation and growth during all kinds of thin film processes, including magnetron sputtering. Therefore, the energy delivered to the surface for nucleation and growth during magnetron sputtering should be measured and analysed by integrated diagnostics of the plasma parameters which are closely associated with the process parameters and other external process conditions. This paper reviews the background of thin film nucleation and growth, the status of magnetron sputtering technology and the progress of plasma diagnostics for plasma processing. The evolution of the microstructure during magnetron sputtering is then discussed with respect to the change in the process variables in terms of the plasma parameters along with empirical data of the integrated plasma diagnostics for various magnetron sputtering conditions with conventional dc, pulsed dc and high power pulsed dc sputtering modes. Among the major energy terms to be discussed are the temperature change in the top surface region and the energies of ions and neutral species. (topical review)

Cavitational hydrothermal oxidation: A new remediation process. Annual progress report, September 1996--August 1997

Energy Technology Data Exchange (ETDEWEB)

Suslick, K.S.

1997-11-21

'During the past year, the authors have continued to make substantial scientific progress on the understanding of cavitation phenomena in aqueous media and applications of cavitation to remediation processes. The efforts have focused on three separate areas: sonoluminescence as a probe of conditions created during cavitational collapse in aqueous media, the use of cavitation for remediation of contaminated water, and an addition of the use of ultrasound in the synthesis of novel heterogeneous catalysts for hydrodehalogenation of halocarbons under mild conditions. In order to gain further understanding of the conditions present during cavitation, the author has continued his studies of sonoluminescence. He has made recent breakthroughs in the use of emission spectroscopy for temperature and pressure measurement of cavitation events, which he expects to publish shortly. He has been able to measure for the first time the temperature of cavitation in water during multi-bubble cavitation in the presence of aromatic hydrocarbons. The emission from excited states of C{sub 2} in water gives temperatures that are consistent with adiabatic compressional heating, with maximum temperatures of 4,300 K. Prior measurements of cavitation temperatures in low vapor pressure nonaqueous media gave somewhat higher temperatures of 5,000 K. This work lays permanently to rest exotic mechanisms for cavitational chemistry, at least for cavitation fields.'

Resurrecting the chimera: Progressions in parenting and peer processes.

Science.gov (United States)

Forgatch, Marion S; Snyder, James J; Patterson, Gerald R; Pauldine, Michael R; Chaw, Yvonne; Elish, Katie; Harris, Jasmine B; Richardson, Eric B

2016-08-01

This report uses 6-year outcomes of the Oregon Divorce Study to examine the processes by which parenting practices affect deviant peer association during two developmental stages: early to middle childhood and late childhood to early adolescence. The participants were 238 newly divorced mothers and their 5- to 8-year-old sons who were randomly assigned to Parent Management Training-Oregon Model (PMTO®) or to a no-treatment control group. Parenting practices, child delinquent behavior, and deviant peer association were repeatedly assessed from baseline to 6 years after baseline using multiple methods and informants. PMTO had a beneficial effect on parenting practices relative to the control group. Two stage models linking changes in parenting generated by PMTO to children's growth in deviant peer association were supported. During the early to middle childhood stage, the relationship of improved parenting practices on deviant peer association was moderated by family socioeconomic status (SES); effective parenting was particularly important in mitigating deviant peer association for lower SES families whose children experience higher densities of deviant peers in schools and neighborhoods. During late childhood and early adolescence, the relationship of improved parenting to youths' growth in deviant peer association was mediated by reductions in the growth of delinquency during childhood; higher levels of early delinquency are likely to promote deviant peer association through processes of selective affiliation and reciprocal deviancy training. The results are discussed in terms of multilevel developmental progressions of diminished parenting, child involvement in deviancy producing processes in peer groups, and increased variety and severity of antisocial behavior, all exacerbated by ecological risks associated with low family SES.

Higher-order processes in x-ray photoionization of atoms

International Nuclear Information System (INIS)

Kanter, E. P.; Dunford, R. W.; Krassig, B.; Southworth, S. H.; Young, L.

2006-01-01

There are several fourth-generation X-ray light source projects now underway around the world and it is anticipated that by the end of the decade, one or more of these X-ray free-electron lasers will be operational. In this contribution, we describe recent measurements and future plans to study both multielectron and multiphoton atomic photoionization. Although such higher-order processes are rare with present third-generation sources, they will be commonplace in experimental work with the new sources. The topics we discuss here are double K-shell ionization and two-photon X-ray photoionization

Chronic Family Economic Hardship, Family Processes and Progression of Mental and Physical Health Symptoms in Adolescence

Science.gov (United States)

Lee, Tae Kyoung; Wickrama, K. A. S.; Simons, Leslie Gordon

2013-01-01

Research has documented the relationship between family stressors such as family economic hardship and marital conflict and adolescents' mental health symptoms, especially depressive symptoms. Few studies, however, have examined the processes whereby supportive parenting lessens this effect and the progression of mental health and physical health…

How to understand, evaluate and influence efficient progress in South Africa’s land reform process: A typology from historical lessons from selected sub-Saharan African countries

Directory of Open Access Journals (Sweden)

Nhlanhla C. Mbatha

2017-12-01

Full Text Available Background: With reports of widespread failures in South Africa’s land reform programmes, the levels of policy uncertainty in the political rhetoric that influences land reform have been increasing. Since 1994 policy targets to transfer land to black farmers have not been met. Of the 2005 target to transfer about 25 million ha of commercial farmland to black farmers by 2014, less than 5 million ha. have been transferred for commercial use. Some studies report failure rates in resettlement projects of up to 90%. To account for the failures, revisions of policies and amendments to legislations have been proposed within a political environment that is becoming increasingly intolerant to slow progress in land transfers and to resettlement failures. Aim: Against this environment, this paper presents a typology for understanding and evaluating important elements of the land reform project in order to influence progress in the process. Setting: The study adopts a historical review of land reform processes in post-colonial Kenya and Zimbabwe in order to identify potential challenges and key lessons for South Africa. Methods: Hence, using institutional and historical analytical lenses in exploring different narratives, the paper reviews reported failures and successes in land reform policy cases from the selected countries. From an institutional framework, prevalent social institutions and key lessons from Kenya, Zimbabwe and South Africa, a typology for evaluating important elements of the land reform process in South Africa is developed and discussed. Additionally, a review of global data collected on average sizes of farms in different regions of the world is provided as evidence to support propositions of what would constitute efficient farmland size ranges for small to medium commercial farms in South Africa. Results and conclusion: A proposition is made on how to use the typology to guide policy and research interventions to reduce failures

Comparison of electron and ion irradiation effects on order-disorder transition in Ni4Mo

International Nuclear Information System (INIS)

Banerjee, S.; Sundararaman, M.

1996-01-01

The effects of radiation damage in metals and alloys caused by electron and heavy ion beams are quite distinct from the consideration of cascade formation. Microstructural changes occurring with progressive dose of irradiation under cascade forming heavy ion irradiation and under electron irradiation have been systematically studied in Ni 4 Mo in the temperature range of 300 to 1050 K. The ordering transformation in this alloy can be used in understanding the fundamental processes of radiation damage. Conversely, radiation experiments provide an insight into the ordering mechanisms. The ordering in this alloy is governed by a competition between a second order and a first order ordering process. Steady state structures developed at different temperatures have been characterised by electron diffraction and imaging. The steady state diagrams are constructed and compared for both electron and ion irradiation. The essential difference between the nature of cascade forming and non-cascade forming irradiation on the order-disorder transformation has been discussed. (orig.)

Exploring hypothetical learning progressions for the chemistry of nitrogen and nuclear processes

Science.gov (United States)

Henry, Deborah McKern

Chemistry is a bridge that connects a number of scientific disciplines. High school students should be able to determine whether scientific information is accurate, how chemistry applies to daily life, and the mechanism by which systems operate (NRC, 2012). This research focuses on describing hypothetical learning progressions for student understanding of the chemical reactions of nitrogen and nuclear processes and examines whether there is consistency in scientific reasoning between these two distinct conceptual areas. The constant comparative method was used to analyze the written products of students including homework, formative and summative tests, laboratory notebooks, reflective journals, written presentations, and discussion board contributions via Edmodo (an online program). The ten participants were 15 and 16 year old students enrolled in a general high school chemistry course. Instruction took place over a ten week period. The learning progression levels ranged from 0 to 4 and were described as missing, novice, intermediate, proficient, and expert. The results were compared to the standards set by the NRC with a lower anchor (expectations for grade 8) and upper anchor (expectations for grade 12). The results indicate that, on average, students were able to reach an intermediate level of understanding for these concepts.

Performance comparison of optimal fractional order hybrid fuzzy PID controllers for handling oscillatory fractional order processes with dead time.

Science.gov (United States)

Das, Saptarshi; Pan, Indranil; Das, Shantanu

2013-07-01

Fuzzy logic based PID controllers have been studied in this paper, considering several combinations of hybrid controllers by grouping the proportional, integral and derivative actions with fuzzy inferencing in different forms. Fractional order (FO) rate of error signal and FO integral of control signal have been used in the design of a family of decomposed hybrid FO fuzzy PID controllers. The input and output scaling factors (SF) along with the integro-differential operators are tuned with real coded genetic algorithm (GA) to produce optimum closed loop performance by simultaneous consideration of the control loop error index and the control signal. Three different classes of fractional order oscillatory processes with various levels of relative dominance between time constant and time delay have been used to test the comparative merits of the proposed family of hybrid fractional order fuzzy PID controllers. Performance comparison of the different FO fuzzy PID controller structures has been done in terms of optimal set-point tracking, load disturbance rejection and minimal variation of manipulated variable or smaller actuator requirement etc. In addition, multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-II) has been used to study the Pareto optimal trade-offs between the set point tracking and control signal, and the set point tracking and load disturbance performance for each of the controller structure to handle the three different types of processes. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Improvement of hospital processes through business process management in Qaem Teaching Hospital: A work in progress.

Science.gov (United States)

Yarmohammadian, Mohammad H; Ebrahimipour, Hossein; Doosty, Farzaneh

2014-01-01

In a world of continuously changing business environments, organizations have no option; however, to deal with such a big level of transformation in order to adjust the consequential demands. Therefore, many companies need to continually improve and review their processes to maintain their competitive advantages in an uncertain environment. Meeting these challenges requires implementing the most efficient possible business processes, geared to the needs of the industry and market segments that the organization serves globally. In the last 10 years, total quality management, business process reengineering, and business process management (BPM) have been some of the management tools applied by organizations to increase business competiveness. This paper is an original article that presents implementation of "BPM" approach in the healthcare domain that allows an organization to improve and review its critical business processes. This project was performed in "Qaem Teaching Hospital" in Mashhad city, Iran and consists of four distinct steps; (1) identify business processes, (2) document the process, (3) analyze and measure the process, and (4) improve the process. Implementing BPM in Qaem Teaching Hospital changed the nature of management by allowing the organization to avoid the complexity of disparate, soloed systems. BPM instead enabled the organization to focus on business processes at a higher level.

Progress on matrix SiC processing and properties for fully ceramic microencapsulated fuel form

International Nuclear Information System (INIS)

Terrani, K.A.; Kiggans, J.O.; Silva, C.M.; Shih, C.; Katoh, Y.; Snead, L.L.

2015-01-01

The consolidation mechanism and resulting properties of the silicon carbide (SiC) matrix of fully ceramic microencapsulated (FCM) fuel form are discussed. The matrix is produced via the nano-infiltration transient eutectic-forming (NITE) process. Coefficient of thermal expansion, thermal conductivity, and strength characteristics of this SiC matrix have been characterized in the unirradiated state. An ad hoc methodology for estimation of thermal conductivity of the neutron-irradiated NITE–SiC matrix is also provided to aid fuel performance modeling efforts specific to this concept. Finally, specific processing methods developed for production of an optimal and reliable fuel form using this process are summarized. These various sections collectively report the progress made to date on production of optimal FCM fuel form to enable its application in light water and advanced reactors

Short-time fourth-order squeezing effects in spontaneous and stimulated four- and six-wave mixing processes

International Nuclear Information System (INIS)

Giri, Dilip Kumar; Gupta, P S

2003-01-01

The concept of fourth-order squeezing of the electromagnetic field is investigated in the fundamental mode in spontaneous and stimulated four- and six-wave mixing processes under the short-time approximation based on a fully quantum mechanical approach. The coupled Heisenberg equations of motion involving real and imaginary parts of the quadrature operators are established. The possibility of obtaining fourth-order squeezing is studied. The dependence of fourth-order squeezing on the number of photons is also investigated. It is shown that fourth-order squeezing, which is a higher-order squeezing, allows a much larger fractional noise reduction than lower-order squeezing. It is shown that squeezing is greater in a stimulated process than the corresponding squeezing in spontaneous interaction. The conditions for obtaining maximum and minimum squeezing are obtained. We have also established the non-classical nature of squeezed radiation using the Glauber-Sudarshan representation

38 CFR 21.7653 - Progress, conduct, and attendance.

Science.gov (United States)

2010-07-01

... on which the school official who is responsible for determining whether a student is making progress...) Satisfactory pursuit of program. In order to receive educational assistance for pursuit of a program of education, a reservist must maintain satisfactory progress. Progress is unsatisfactory if the reservist does...

Malignant transformation of oral lichen planus by a chronic inflammatory process. Use of topical corticosteroids to prevent this progression?

Science.gov (United States)

Otero-Rey, Eva Maria; Suarez-Alen, Fatima; Peñamaria-Mallon, Manuel; Lopez-Lopez, Jose; Blanco-Carrion, Andres

2014-11-01

Oral lichen planus is a potentially malignant disorder with a capacity, although low, for malignant transformation. Of all the factors related to the process of malignant transformation, it is believed that the chronic inflammatory process plays a key role in the development of oral cancer. This inflammatory process is capable of providing a microenvironment based on different inflammatory cells and molecules that affect cellular growth, proliferation and differentiation. The objectives of our study are: to review the available evidence about the possible relationship between the chronic inflammatory process present in oral lichen planus and its malignant transformation, to discuss the potential therapeutic implications derived from this relationship and to study the role that topical corticosteroids play in the control of oral lichen planus inflammation and its possible progression to malignant transformation. The maintenance of a minimum dose of topical corticosteroids could prevent the inflammatory progression of oral lichen planus to oral cancer.

The order progress diagram : A supportive tool for diagnosing delivery reliability performance in make-to-order companies

NARCIS (Netherlands)

Soepenberg, G.D.; Land, M.J.; Gaalman, G.J.C.

This paper describes the development of a new tool for facilitating the diagnosis of logistic improvement opportunities in make-to-order (MTO) companies. Competitiveness of these companies increasingly imposes needs upon delivery reliability. In order to achieve high delivery reliability, both the

Sequential inflammatory processes define human progression from M. tuberculosis infection to tuberculosis disease.

Science.gov (United States)

Scriba, Thomas J; Penn-Nicholson, Adam; Shankar, Smitha; Hraha, Tom; Thompson, Ethan G; Sterling, David; Nemes, Elisa; Darboe, Fatoumatta; Suliman, Sara; Amon, Lynn M; Mahomed, Hassan; Erasmus, Mzwandile; Whatney, Wendy; Johnson, John L; Boom, W Henry; Hatherill, Mark; Valvo, Joe; De Groote, Mary Ann; Ochsner, Urs A; Aderem, Alan; Hanekom, Willem A; Zak, Daniel E

2017-11-01

Our understanding of mechanisms underlying progression from Mycobacterium tuberculosis infection to pulmonary tuberculosis disease in humans remains limited. To define such mechanisms, we followed M. tuberculosis-infected adolescents longitudinally. Blood samples from forty-four adolescents who ultimately developed tuberculosis disease (“progressors”) were compared with those from 106 matched controls, who remained healthy during two years of follow up. We performed longitudinal whole blood transcriptomic analyses by RNA sequencing and plasma proteome analyses using multiplexed slow off-rate modified DNA aptamers. Tuberculosis progression was associated with sequential modulation of immunological processes. Type I/II interferon signalling and complement cascade were elevated 18 months before tuberculosis disease diagnosis, while changes in myeloid inflammation, lymphoid, monocyte and neutrophil gene modules occurred more proximally to tuberculosis disease. Analysis of gene expression in purified T cells also revealed early suppression of Th17 responses in progressors, relative to M. tuberculosis-infected controls. This was confirmed in an independent adult cohort who received BCG re-vaccination; transcript expression of interferon response genes in blood prior to BCG administration was associated with suppression of IL-17 expression by BCG-specific CD4 T cells 3 weeks post-vaccination. Our findings provide a timeline to the different immunological stages of disease progression which comprise sequential inflammatory dynamics and immune alterations that precede disease manifestations and diagnosis of tuberculosis disease. These findings have important implications for developing diagnostics, vaccination and host-directed therapies for tuberculosis. Clincialtrials.gov, NCT01119521.

Development of a higher-order finite volume method for simulation of thermal oil recovery process using moving mesh strategy

Energy Technology Data Exchange (ETDEWEB)

Ahmadi, M. [Heriot Watt Univ., Edinburgh (United Kingdom)

2008-10-15

This paper described a project in which a higher order up-winding scheme was used to solve mass/energy conservation equations for simulating steam flood processes in an oil reservoir. Thermal recovery processes are among the most complex because they require a detailed accounting of thermal energy and chemical reaction kinetics. The numerical simulation of thermal recovery processes involves localized phenomena such as saturation and temperatures fronts due to hyperbolic features of governing conservation laws. A second order accurate FV method that was improved by a moving mesh strategy was used to adjust for moving coordinates on a finely gridded domain. The Finite volume method was used and the problem of steam injection was then tested using derived solution frameworks on both mixed and moving coordinates. The benefits of using a higher-order Godunov solver instead of lower-order ones were qualified. This second order correction resulted in better resolution on moving features. Preferences of higher-order solvers over lower-order ones in terms of shock capturing is under further investigation. It was concluded that although this simulation study was limited to steam flooding processes, the newly presented approach may be suitable to other enhanced oil recovery processes such as VAPEX, SAGD and in situ combustion processes. 23 refs., 28 figs.

Development of an analogue multiplexed regulation for periodic 1. order delayed processes

International Nuclear Information System (INIS)

Amblard, J.C.

1967-07-01

The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [fr

CBCT Post-Processing Tools to Manage the Progression of Invasive Cervical Resorption: A Case Report.

Science.gov (United States)

Vasconcelos, Karla de Faria; de-Azevedo-Vaz, Sergio Lins; Freitas, Deborah Queiroz; Haiter-Neto, Francisco

2016-01-01

This case report aimed to highlight the usefulness of cone beam computed tomography (CBCT) and its post-processing tools for the diagnosis, follow-up and treatment planning of invasive cervical resorption (ICR). A 16-year-old female patient was referred for periapical radiographic examination, which revealed an irregular but well demarcated radiolucency in the mandibular right central incisor. In addition, CBCT scanning was performed to distinguish between ICR and internal root resorption. After the diagnosis of ICR, the patient was advised to return shortly but did so only six years later. At that time, another CBCT scan was performed and CBCT registration and subtraction were done to document lesion progress. These imaging tools were able to show lesion progress and extent clearly and were fundamental for differential diagnosis and treatment decision.

Progress in all-order breakup reaction theories

Indian Academy of Sciences (India)

which are the starting points for a discussion on the theory of breakup processes. The ground state wave function of the projectile, φa(rbc), satisfies. (Tb + Tc + ..... constructive at smaller neutron angles, often being larger or almost equal to the individual nuclear terms. These results, thus, indicate that the CNI terms are not.

Theories of transporting processes of Cu in Jiaozhou Bay

Science.gov (United States)

Yang, Dongfang; Su, Chunhua; Zhu, Sixi; Wu, Yunjie; Zhou, Wei

2018-02-01

Many marine bays have been polluted along with the rapid development of industry and population size, and understanding the transporting progresses of pollutants is essential to pollution control. In order to better understanding the transporting progresses of pollutants in marine, this paper carried on a comprehensive research of the theories of transporting processes of Cu in Jiaozhou Bay. Results showed that the transporting processes of Cu in this bay could be summarized into seven key theories including homogeneous theory, environmental dynamic theory, horizontal loss theory, source to waters transporting theory, sedimentation transporting theory, migration trend theory and vertical transporting theory, respectively. These theories helpful to better understand the migration progress of pollutants in marine bay.

PARALLEL PROCESSING OF BIG POINT CLOUDS USING Z-ORDER-BASED PARTITIONING

Directory of Open Access Journals (Sweden)

C. Alis

2016-06-01

Full Text Available As laser scanning technology improves and costs are coming down, the amount of point cloud data being generated can be prohibitively difficult and expensive to process on a single machine. This data explosion is not only limited to point cloud data. Voluminous amounts of high-dimensionality and quickly accumulating data, collectively known as Big Data, such as those generated by social media, Internet of Things devices and commercial transactions, are becoming more prevalent as well. New computing paradigms and frameworks are being developed to efficiently handle the processing of Big Data, many of which utilize a compute cluster composed of several commodity grade machines to process chunks of data in parallel. A central concept in many of these frameworks is data locality. By its nature, Big Data is large enough that the entire dataset would not fit on the memory and hard drives of a single node hence replicating the entire dataset to each worker node is impractical. The data must then be partitioned across worker nodes in a manner that minimises data transfer across the network. This is a challenge for point cloud data because there exist different ways to partition data and they may require data transfer. We propose a partitioning based on Z-order which is a form of locality-sensitive hashing. The Z-order or Morton code is computed by dividing each dimension to form a grid then interleaving the binary representation of each dimension. For example, the Z-order code for the grid square with coordinates (x = 1 = 012, y = 3 = 112 is 10112 = 11. The number of points in each partition is controlled by the number of bits per dimension: the more bits, the fewer the points. The number of bits per dimension also controls the level of detail with more bits yielding finer partitioning. We present this partitioning method by implementing it on Apache Spark and investigating how different parameters affect the accuracy and running time of the k nearest

Asymmetric neighborhood functions accelerate ordering process of self-organizing maps

International Nuclear Information System (INIS)

Ota, Kaiichiro; Aoki, Takaaki; Kurata, Koji; Aoyagi, Toshio

2011-01-01

A self-organizing map (SOM) algorithm can generate a topographic map from a high-dimensional stimulus space to a low-dimensional array of units. Because a topographic map preserves neighborhood relationships between the stimuli, the SOM can be applied to certain types of information processing such as data visualization. During the learning process, however, topological defects frequently emerge in the map. The presence of defects tends to drastically slow down the formation of a globally ordered topographic map. To remove such topological defects, it has been reported that an asymmetric neighborhood function is effective, but only in the simple case of mapping one-dimensional stimuli to a chain of units. In this paper, we demonstrate that even when high-dimensional stimuli are used, the asymmetric neighborhood function is effective for both artificial and real-world data. Our results suggest that applying the asymmetric neighborhood function to the SOM algorithm improves the reliability of the algorithm. In addition, it enables processing of complicated, high-dimensional data by using this algorithm.

Building a progressive vertical integration

International Nuclear Information System (INIS)

Charette, D.

2008-01-01

AAER Inc. is a Quebec-based company that manufactures turbines using proven European designs. This presentation discussed the company's business model. The company places an emphasis on identifying strategic and key components currently available for its turbines. Market analyses are performed in order to determine ideal suppliers and define business strategies and needs. The company invests in long-term relationships with its suppliers. Business partners for AAER are of a similar size and have a mutual understanding and respect for the company's business practices. Long-term agreements with suppliers are signed in order to ensure reliability and control over costs. Progressive vertical integration has been achieved by progressively manufacturing key components and integrating a North American supply chain. The company's secure supply chain and progressive vertical integration has significantly reduced financial costs and provided better quality control. It was concluded that vertical integration has also allowed AAER to provide better customer service and reduce transportation costs. tabs., figs

International workshop on resonant X-ray scattering in electrically-ordered systems

Energy Technology Data Exchange (ETDEWEB)

Collins, S.P.; Pettifer, R.F.; Laundy, D.; Ishida, K.; Kokubun, J.; Giles, C.; Yokaichiya, F.; Song, C.; Lee, K.B.; Ji, S.; Koo, J.; Park, Y.J.; Kim, J.Y.; Park, J.H.; Shin, H.J.; Rhyee, J.S.; Oh, B.H.; Cho, B.K.; Wilkins Stuart, B.; Paixao, J.A.; Caciuffo, R.; Javorsky, P.; Wastin, F.; Rebizant, J.; Detlefs, C.; Bernheoft, N.; Lander, G.H.; Bombardi, A.; Bergevin, F. de; Matteo, S. di; Paolasini, L.; Rodriguez-Carvajal, J.; Carretta, P.; Millet, P.; Caciuffo, R.; Goff, J.P.; Deen, P.P.; Lee, S.; Stunault, A.; Brown, S.; Mannix, D.; McIntyre, G.J.; Ward, R.C.C.; Wells, M.R.; Lorenzo, J.E.; Joly, Y.; Nazarenko, E.; Staub, U.; Srajer, G.; Haskel, D.; Choi, Y.; Lee, D.R.; Lang, J.C.; Meersschaut, J.; Jiang, J.S.; Bader, S.D.; Bouchenoire, L.; Brown, S.D.; Beesley, A.; Herring, A.; Thomas, M.; Thompson, P.; Langridge, S.; Stirling, W.G.; Mirone, A.; Lander, G.; Wilkins, S.; Ward, R.C.C.; Wells, M.R.; Zochowski, S.W.; Garcia, J.; Subias, G.; Blasco, J.; Sanchez, M.C.; Proietti, M.G.; Lovesey, S.W.; Dmitrienko, V.E.; Ovchinnikova, E.N.; Ishida, K.; Kokubun, J.; Kirfel, A.; Collins, S.P.; Laundy, D.; Oreshko, A.P.; Strange, P.; Horne, M.; Arola, E.; Winter, H.; Szotek, Z.; Temmerman, W.M.; Igarashi, J.; Usuda, M.; Takahashi, M.; Matteo, S. di; Bernhoeft, N.; Hill, J.P.; Lang, J.C.; McWhan, D.; Lee, D.R.; Haskel, D.; Srajer, G.; Hatton Peter, D.; Katsumata, K.; Braithwaite, D

2004-07-01

The research field of Resonant X-ray Scattering (RXS) has achieved tremendous progress in the last years. Nowadays RXS is rapidly becoming the crucial technique for investigating the subtleties of microscopic magnetism in systems where the ground state properties reflect a delicate balance between several different correlated processes. The aim of this workshop is to discuss present and future possibilities for RXS investigations of electronic order, including studies of charge, magnetic, and multipolar ordered states. The sessions will cover experimental and theoretical aspects of hard and soft X-ray resonant scattering from single crystals and thin films. This document gathers the summaries of the presentations.

International workshop on resonant X-ray scattering in electrically-ordered systems

International Nuclear Information System (INIS)

Collins, S.P.; Pettifer, R.F.; Laundy, D.; Ishida, K.; Kokubun, J.; Giles, C.; Yokaichiya, F.; Song, C.; Lee, K.B.; Ji, S.; Koo, J.; Park, Y.J.; Kim, J.Y.; Park, J.H.; Shin, H.J.; Rhyee, J.S.; Oh, B.H.; Cho, B.K.; Wilkins Stuart, B.; Paixao, J.A.; Caciuffo, R.; Javorsky, P.; Wastin, F.; Rebizant, J.; Detlefs, C.; Bernheoft, N.; Lander, G.H.; Bombardi, A.; Bergevin, F. de; Matteo, S. di; Paolasini, L.; Rodriguez-Carvajal, J.; Carretta, P.; Millet, P.; Caciuffo, R.; Goff, J.P.; Deen, P.P.; Lee, S.; Stunault, A.; Brown, S.; Mannix, D.; McIntyre, G.J.; Ward, R.C.C.; Wells, M.R.; Lorenzo, J.E.; Joly, Y.; Nazarenko, E.; Staub, U.; Srajer, G.; Haskel, D.; Choi, Y.; Lee, D.R.; Lang, J.C.; Meersschaut, J.; Jiang, J.S.; Bader, S.D.; Bouchenoire, L.; Brown, S.D.; Beesley, A.; Herring, A.; Thomas, M.; Thompson, P.; Langridge, S.; Stirling, W.G.; Mirone, A.; Lander, G.; Wilkins, S.; Ward, R.C.C.; Wells, M.R.; Zochowski, S.W.; Garcia, J.; Subias, G.; Blasco, J.; Sanchez, M.C.; Proietti, M.G.; Lovesey, S.W.; Dmitrienko, V.E.; Ovchinnikova, E.N.; Ishida, K.; Kokubun, J.; Kirfel, A.; Collins, S.P.; Laundy, D.; Oreshko, A.P.; Strange, P.; Horne, M.; Arola, E.; Winter, H.; Szotek, Z.; Temmerman, W.M.; Igarashi, J.; Usuda, M.; Takahashi, M.; Matteo, S. di; Bernhoeft, N.; Hill, J.P.; Lang, J.C.; McWhan, D.; Lee, D.R.; Haskel, D.; Srajer, G.; Hatton Peter, D.; Katsumata, K.; Braithwaite, D.

2004-01-01

The research field of Resonant X-ray Scattering (RXS) has achieved tremendous progress in the last years. Nowadays RXS is rapidly becoming the crucial technique for investigating the subtleties of microscopic magnetism in systems where the ground state properties reflect a delicate balance between several different correlated processes. The aim of this workshop is to discuss present and future possibilities for RXS investigations of electronic order, including studies of charge, magnetic, and multipolar ordered states. The sessions will cover experimental and theoretical aspects of hard and soft X-ray resonant scattering from single crystals and thin films. This document gathers the summaries of the presentations

The Process-Oriented Simulation (POS) model for common cause failures: recent progress

International Nuclear Information System (INIS)

Berg, H.P.; Goertz, R.; Schimetschka, E.; Kesten, J.

2006-01-01

A common-cause failure (CCF) model based on stochastic simulation has been developed to complement the established approaches and to overcome some of their shortcomings. Reflecting the models proximity to the CCF process it was called Process Oriented Simulation (POS) Model. In recent years, some progress has been made to render the POS model fit for practical applications comprising the development of parameter estimates and a number of test applications in areas where results were already available - especially from CCF benchmarks - and comparison can provide insights in strong and weak points of the different approaches. In this paper, a detailed description of the POS model is provided together with the approach to parameter estimation and representative test applications. It is concluded, that the POS model has a number of strengths - especially the feature to provide reasonable extrapolation to CCF groups with high degrees of redundancy - and thus a considerable potential to complement the insights obtained from existing modeling. (orig.)

New sensors and processing chain

CERN Document Server

Yaakoubi, Nourdin

2014-01-01

A vital tool for researchers, engineers, and students, New Sensors and Processing Chain focuses on the processing chain to set up in order to extract relevant information on various systems. Highlighting the design of new microsensors and various applications, the authors present recent progress in instrumentation and microsystem design, providing insight to the modification of the sensor itself as well as its environment. Various applications illustrate the presentations, which show how a processing chain is organized from the data acquired by a specific sensor.

Ordered particles versus ordered pointers in the hybrid ordered plasma simulation (HOPS) code

International Nuclear Information System (INIS)

Anderson, D.V.; Shumaker, D.E.

1993-01-01

From a computational standpoint, particle simulation calculations for plasmas have not adapted well to the transitions from scalar to vector processing nor from serial to parallel environments. They have suffered from inordinate and excessive accessing of computer memory and have been hobbled by relatively inefficient gather-scatter constructs resulting from the use of indirect indexing. Lastly, the many-to-one mapping characteristic of the deposition phase has made it difficult to perform this in parallel. The authors' code sorts and reorders the particles in a spatial order. This allows them to greatly reduce the memory references, to run in directly indexed vector mode, and to employ domain decomposition to achieve parallelization. The field model solves pre-maxwell equations by interatively implicit methods. The OSOP (Ordered Storage Ordered Processing) version of HOPS keeps the particle tables ordered by rebuilding them after each particle pushing phase. Alternatively, the RSOP (Random Storage Ordered Processing) version keeps a table of pointers ordered by rebuilding them. Although OSOP is somewhat faster than RSOP in tests on vector-parallel machines, it is not clear this advantage will carry over to massively parallel computers

Reliability Estimation of the Pultrusion Process Using the First-Order Reliability Method (FORM)

DEFF Research Database (Denmark)

Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri

2013-01-01

In the present study the reliability estimation of the pultrusion process of a flat plate is analyzed by using the first order reliability method (FORM). The implementation of the numerical process model is validated by comparing the deterministic temperature and cure degree profiles...... with corresponding analyses in the literature. The centerline degree of cure at the exit (CDOCE) being less than a critical value and the maximum composite temperature (Tmax) during the process being greater than a critical temperature are selected as the limit state functions (LSFs) for the FORM. The cumulative...

The order of information processing alters economic gain-loss framing effects.

Science.gov (United States)

Kwak, Youngbin; Huettel, Scott

2018-01-01

Adaptive decision making requires analysis of available information during the process of choice. In many decisions that information is presented visually - which means that variations in visual properties (e.g., salience, complexity) can potentially influence the process of choice. In the current study, we demonstrate that variation in the left-right positioning of risky and safe decision options can influence the canonical gain-loss framing effect. Two experiments were conducted using an economic framing task in which participants chose between gambles and certain outcomes. The first experiment demonstrated that the magnitude of the gain-loss framing effect was greater when the certain option signaling the current frame was presented on the left side of the visual display. Eye-tracking data during task performance showed a left-gaze bias for initial fixations, suggesting that the option presented on the left side was processed first. Combination of eye-tracking and choice data revealed that there was a significant effect of direction of first gaze (i.e. left vs. right) as well as an interaction between gaze direction and identity of the first fixated information (i.e. certain vs. gamble) regardless of frame. A second experiment presented the gamble and certain options in a random order, with a temporal delay between their presentations. We found that the magnitude of gain-loss framing was larger when the certain option was presented first, regardless of left and right positioning, only in individuals with lower risk-taking tendencies. The effect of presentation order on framing was not present in high risk-takers. These results suggest that the sequence of visual information processing as well as their left-right positioning can bias choices by changing the impact of the presented information during risky decision making. Copyright © 2017 Elsevier B.V. All rights reserved.

Auditory temporal-order processing of vowel sequences by young and elderly listeners.

Science.gov (United States)

Fogerty, Daniel; Humes, Larry E; Kewley-Port, Diane

2010-04-01

This project focused on the individual differences underlying observed variability in temporal processing among older listeners. Four measures of vowel temporal-order identification were completed by young (N=35; 18-31 years) and older (N=151; 60-88 years) listeners. Experiments used forced-choice, constant-stimuli methods to determine the smallest stimulus onset asynchrony (SOA) between brief (40 or 70 ms) vowels that enabled identification of a stimulus sequence. Four words (pit, pet, pot, and put) spoken by a male talker were processed to serve as vowel stimuli. All listeners identified the vowels in isolation with better than 90% accuracy. Vowel temporal-order tasks included the following: (1) monaural two-item identification, (2) monaural four-item identification, (3) dichotic two-item vowel identification, and (4) dichotic two-item ear identification. Results indicated that older listeners had more variability and performed poorer than young listeners on vowel-identification tasks, although a large overlap in distributions was observed. Both age groups performed similarly on the dichotic ear-identification task. For both groups, the monaural four-item and dichotic two-item tasks were significantly harder than the monaural two-item task. Older listeners' SOA thresholds improved with additional stimulus exposure and shorter dichotic stimulus durations. Individual differences of temporal-order performance among the older listeners demonstrated the influence of cognitive measures, but not audibility or age.

Spatial Processes in Linear Ordering

Science.gov (United States)

von Hecker, Ulrich; Klauer, Karl Christoph; Wolf, Lukas; Fazilat-Pour, Masoud

2016-01-01

Memory performance in linear order reasoning tasks (A > B, B > C, C > D, etc.) shows quicker, and more accurate responses to queries on wider (AD) than narrower (AB) pairs on a hypothetical linear mental model (A -- B -- C -- D). While indicative of an analogue representation, research so far did not provide positive evidence for spatial…

Reduced Order Fractional Fourier Transform A New Variant to Fractional Signal Processing Definition and Properties

OpenAIRE

Kumar, Sanjay

2018-01-01

In this paper, a new variant to fractional signal processing is proposed known as the Reduced Order Fractional Fourier Transform. Various properties satisfied by its transformation kernel is derived. The properties associated with the proposed Reduced Order Fractional Fourier Transform like shift, modulation, time-frequency shift property are also derived and it is shown mathematically that when the rotation angle of Reduced Order Fractional Fourier Transform approaches 90 degrees, the propos...

Manipulation and application of orbital ordering

International Nuclear Information System (INIS)

Sheng Zhigao; Sun Yuping

2014-01-01

Under certain conditions, the orbits of the outmost shell electrons in strong correlated materials can be localized in order, which gives birth to so-called orbital ordering. During the construction or destruction of the orbital ordering, strongly correlated materials show fruitful quantum critical phenomena with great potential for future applications. We first present the mechanism for the construction of orbital ordering. Then, some physical properties associated with orbits are discussed. Finally, we emphasize the key points and progress in the research of orbital ordering controlling. (authors)

Progress on HELIAS systems studies

Energy Technology Data Exchange (ETDEWEB)

Warmer, Felix; Beidler, Craig D.; Dinklage, Andreas; Feng, Yuehe; Geiger, Joachim; Schauer, Felix; Turkin, Yuriy; Wolf, Robert; Xanthopoulos, Pavlos [Max-Planck-Institut fuer Plasmaphysik, D-17491 Greifswald (Germany); Kemp, Richard; Knight, Peter; Ward, David [Culham Centre for Fusion Energy, Abingdon, Oxfordshire, OX14 3DB (United Kingdom)

2015-05-01

In order to study and design next-step fusion devices such as DEMO, comprehensive systems codes are commonly employed. For the HELIAS-line, stellarator-specific models have been developed, implemented, and verified within the systems code PROCESS. This systems code ansatz is complemented by self-consistent modeling of plasma scenarios employing a predictive 1-D neoclassical transport code which has been augmented with a model for the edge anomalous transport based on 3-D ITG turbulence simulations. This approach is investigated to ultimately allow one to conduct stellarator system studies, develop design points of HELIAS burning plasma devices, and to facilitate a direct comparison between tokamak and stellarator DEMO and power plant designs. The work reports on the progress towards these goals.

Progressivity of Taxes, Skeweness of Income Distribution and Violations of the Progressive Principle in Income Tax Systems

Directory of Open Access Journals (Sweden)

Edyta Mazurek

2014-06-01

Full Text Available Kakwani and Lambert state the three axioms, which should be respected by an equitable tax system. They also proposed a measurement system to evaluate the violations of the axioms. One of the axioms, axiom 2, formulates the progression principle in income tax systems. Vernizzi and Pellegrino improved the alternative index to evaluate violations concerning the progressive command in a tax system. The main aim of this paper is to compare the two indexes in order to evaluate violations of progressive principle in income tax systém using the real data. We also check how the progressivity of taxes and skewness of income distribution affect the measurement of the progressive principle violation.

Temperature dependent investigation on optically active process of higher-order bands in irradiated silicon

International Nuclear Information System (INIS)

Shi Yi; Nanjing Univ., JS; Wu Fengmei; Nanjing Univ., JS; Zheng Youdou; Nanjing Univ., JS; Suezawa, M.; Imai, M.; Sumino, K.

1996-01-01

Optically active processes of the higher-order bands (HOB) are investigated at different temperatures in fast neutron irradiated silicon using Fourier transform infrared absorption measurement. It is shown that the optically active process is nearly temperature independent below 80 K, the slow decay process remains up to a heating temperature of 180 K. The observations are analyzed in terms of the relaxation behavior of photoexcited carriers governed by fast neutron radiation induced defect clusters. (orig.)

Progressive supranuclear palsy: neuronal and glial cytoskeletal pathology in the higher order processing autonomic nuclei of the lower brainstem.

Science.gov (United States)

Rüb, U; Del Tredici, K; Schultz, C; de Vos, R A I; Jansen Steur, E N H; Arai, K; Braak, H

2002-02-01

The medial and lateral parabrachial nuclei (MPB, LPB), the gigantocellular reticular nucleus (GI), the raphes magnus (RMG) and raphes obscurus nuclei (ROB), as well as the intermediate reticular zone (IRZ) represent pivotal subordinate brainstem centres, all of which control autonomic functions. In this study, we investigated the occurrence and severity of the neuronal and glial cytoskeletal pathology in these six brainstem nuclei from 17 individuals with clinically diagnosed and neuropathologically confirmed progressive supranuclear palsy (PSP). The association between the severity of the pathology and the duration of the disease was investigated by means of correlation analysis. The brainstem nuclei in all of the PSP cases were affected by the neuronal cytoskeletal pathology, with the IRZ and GI regularly showing severe involvement, the MPB, RMG, and ROB marked involvement, and the LPB mild involvement. In the six nuclear greys studied, glial cells undergo alterations of their cytoskeleton on an irregular basis, whereby diseased oligodendrocytes predominantly presented as coiled bodies and affected astrocytes as thorn-shaped astrocytes. In all six nuclei, the severity of the neuronal or glial cytoskeletal pathology showed no correlation with the duration of PSP. In view of their functional role, the neuronal pathology in the nuclei studied offers a possible explanation for the autonomic dysfunctions that eventually develop in the course of PSP.

Order of current variance and diffusivity in the rate one totally asymmetric zero range process

NARCIS (Netherlands)

Balázs, M.; Komjáthy, J.

2008-01-01

We prove that the variance of the current across a characteristic is of order t 2/3 in a stationary constant rate totally asymmetric zero range process, and that the diffusivity has order t 1/3. This is a step towards proving universality of this scaling behavior in the class of one-dimensional

Progress of data processing system in JT-60 utilizing the UNIX-based workstations

International Nuclear Information System (INIS)

Sakata, Shinya; Kiyono, Kimihiro; Oshima, Takayuki; Sato, Minoru; Ozeki, Takahisa

2007-07-01

JT-60 data processing system (DPS) possesses three-level hierarchy. At the top level of hierarchy is JT-60 inter-shot processor (MSP-ISP), which is a mainframe computer, provides communication with the JT-60 supervisory control system and supervises the internal communication inside the DPS. The middle level of hierarchy has minicomputers and the bottom level of hierarchy has individual diagnostic subsystems, which consist of the CAMAC and VME modules. To meet the demand for advanced diagnostics, the DPS has been progressed in stages from a three-level hierarchy system, which was dependent on the processing power of the MSP-ISP, to a two-level hierarchy system, which is decentralized data processing system (New-DPS) by utilizing the UNIX-based workstations and network technology. This replacement had been accomplished, and the New-DPS has been started to operate in October 2005. In this report, we describe the development and improvement of the New-DPS, whose functions were decentralized from the MSP-ISP to the UNIX-based workstations. (author)

Accelerator research studies: Progress report, Task B

International Nuclear Information System (INIS)

1985-06-01

The main objectives in Task B of the research program are summarized as follows: (1) studies of the collective acceleration of positive ions from a localized plasma source by an intense relativistic electron beam (IREB), (2) studies of ways in which external control may be achieved over the electron beam front in order to achieve higher ion energies - the Beam Front Accelerator (BFA) concept, and (3) study of electron and ion beam generation in a new kind of compact pulsed accelerator in which energy is stored inductively and switched using a plasma focus opening switch. During the past year, substantial progress was made in each of these areas. Our exploratory research on the collective acceleration of laser-produced ions has confirmed the acceleration of C, Al, and Fe ions to peak energies in excess of 10 MeV/amu. In addition, studies of the relation between collective ion acceleration and electron beam propagation in vacuum have shed new light on the experimental processes that lead to energy transfer from electrons to ions. Meanwhile, extensive progress has been made in our attempts to use analytical theory and numerical simulation to model ion acceleration in these systems. Our resultant improved understanding of the processes that limit the peak ion energy has had a profound impact on our plans for further research in this area. Studies of the Compact Pulsed Accelerator have included both ion and electron beam extraction from the device. Its potential to reduce the volume of pulse power sources by an order of magnitude has already been demonstrated, and plans are currently underway to scale the experiment up to voltages in the 1 MV range

Next generation of procedural skills curriculum development: Proficiency-based progression

Directory of Open Access Journals (Sweden)

Richard M. Satava

2015-01-01

Conclusion: The FRS use a new process (full life-cycle curriculum development with proficiency-based progression which can be used in order to develop any quantitative procedural curriculum, through generic templates that have been developed. Such an approach will dramatically decrease the cost, time and effort to develop a new specific curriculum, while producing uniformity in approach, inter-operability among different curricula and consistency in objective assessment. This process is currently online, open source and freely available, to encourage the adoption of a scholarly and rigorous approach to curriculum development which is flexible enough to be adopted and adapted to most technical skills curriculum needs.

Efficient collective influence maximization in cascading processes with first-order transitions

Science.gov (United States)

Pei, Sen; Teng, Xian; Shaman, Jeffrey; Morone, Flaviano; Makse, Hernán A.

2017-01-01

In many social and biological networks, the collective dynamics of the entire system can be shaped by a small set of influential units through a global cascading process, manifested by an abrupt first-order transition in dynamical behaviors. Despite its importance in applications, efficient identification of multiple influential spreaders in cascading processes still remains a challenging task for large-scale networks. Here we address this issue by exploring the collective influence in general threshold models of cascading process. Our analysis reveals that the importance of spreaders is fixed by the subcritical paths along which cascades propagate: the number of subcritical paths attached to each spreader determines its contribution to global cascades. The concept of subcritical path allows us to introduce a scalable algorithm for massively large-scale networks. Results in both synthetic random graphs and real networks show that the proposed method can achieve larger collective influence given the same number of seeds compared with other scalable heuristic approaches. PMID:28349988

Climatology in support of climate risk management : a progress report.

OpenAIRE

McGregor, G.R.

2015-01-01

Climate risk management has emerged over the last decade as a distinct area of activity within the wider field of climatology. Its focus is on integrating climate and non-climate information in order to enhance the decision-making process in a wide range of climate-sensitive sectors of society, the economy and the environment. Given the burgeoning pure and applied climate science literature that addresses a range of climate risks, the purpose of this progress report is to provide an overview ...

Recent progress in the melt-process technique of high-temperature superconductors

CERN Document Server

Ikuta, H; Mizutani, U

1999-01-01

Recently, the performance of high-temperature super conductors prepared by the melt-process technique has been greatly improved. This progress was accomplished by the addition of Ag into the starting materials of the Sm-Ba-CuO $9 system, which prevents the formation of severe macro-sized cracks in the finished samples. The magnetic flux density trapped by this material has now reached 9 T at 25 K, which is comparable to the magnetic flux density produced by $9 ordinary superconducting magnets. The amount of magnetic flux density that can be trapped by the sample is limited by the mechanical strength rather than superconducting properties of the material. The increase in the mechanical $9 strength of the material is important both for further improvement of the material properties and for ensuring reliability of the material in practical applications. (20 refs).

Juvenile myopia progression, risk factors and interventions.

Science.gov (United States)

Myrowitz, Elliott H

2012-07-01

The development and progression of early onset myopia is actively being investigated. While myopia is often considered a benign condition it should be considered a public health problem for its visual, quality of life, and economic consequences. Nearly half of the visually impaired population in the world has uncorrected refractive errors, with myopia a high percent of that group. Uncorrected visual acuity should be screened for and treated in order to improve academic performance, career opportunities and socio-economic status. Genetic and environmental factors contribute to the onset and progression of myopia. Twin studies have supported genetic factors and research continues to identify myopia genetic loci. While multiple myopia genetic loci have been identified establishing myopia as a common complex disorder, there is not yet a genetic model explaining myopia progression in populations. Environmental factors include near work, education levels, urban compared to rural location, and time spent outdoors. In this field of study where there continues to be etiology controversies, there is recent agreement that children who spend more time outdoors are less likely to become myopic. Worldwide population studies, some completed and some in progress, with a common protocol are gathering both genetic and environmental cohort data of great value. There have been rapid population changes in prevalence rates supporting an environmental influence. Interventions to prevent juvenile myopia progression include pharmacologic agents, glasses and contact lenses. Pharmacological interventions over 1-2 year trials have shown benefits. Peripheral vision defocus has been found to affect the emmetropization process and may be affected by wearing glasses or contacts. Accommodation accuracy also has been implicated in myopia progression. Further research will aim to assess both the role and interaction of environmental influences and genetic factors.

Threshold resummation and higher order effects in QCD

International Nuclear Information System (INIS)

Ringer, Felix Maximilian

2015-01-01

Quantum chromodynamics (QCD) is a quantum field theory that describes the strong interactions between quarks and gluons, the building blocks of all hadrons. Thanks to the experimental progress over the past decades, there has been an ever-growing need for QCD precision calculations for scattering processes involving hadrons. For processes at large momentum transfer, perturbative QCD offers a systematic approach for obtaining precise predictions. This approach relies on two key concepts: the asymptotic freedom of QCD and factorization. In a perturbative calculation at higher orders, the infrared cancellation between virtual and real emission diagrams generally leaves behind logarithmic contributions. In many observables relevant for hadronic scattering these logarithms are associated with a kinematic threshold and are hence known as ''threshold logarithms''. They become large when the available phase space for real gluon emission shrinks. In order to obtain a reliable prediction from QCD, the threshold logarithms need to be taken into account to all orders in the strong coupling constant, a procedure known as ''threshold resummation''. The main focus of my PhD thesis is on studies of QCD threshold resummation effects beyond the next-to-leading logarithmic order. Here we primarily consider the production of hadron pairs in hadronic collisions as an example. In addition, we also consider hadronic jet production, which is particularly interesting for the phenomenology at the LHC. For both processes, we fully take into account the non-trivial QCD color structure of the underlying partonic hard- scattering cross sections. We find that threshold resummation leads to sizable numerical effects in the kinematic regimes relevant for comparisons to experimental data.

Generation of higher-order squeezing of quantum electromagnetic fields by degenerate four-wave mixing and other processes

International Nuclear Information System (INIS)

Li Xizeng; Shan Ying; Mandel, L.

1988-11-01

It is found that the field of the combined mode of the probe wave and the phase-conjugate wave in the process of degenerate four-wave mixing exhibits higher-order squeezing to all even order. The degree of squeezing increases with the order N, and the higher-order squeeze parameter q N may approach -1. (author). 3 refs, 2 figs

Propofol disrupts functional interactions between sensory and high-order processing of auditory verbal memory.

Science.gov (United States)

Liu, Xiaolin; Lauer, Kathryn K; Ward, Barney D; Rao, Stephen M; Li, Shi-Jiang; Hudetz, Anthony G

2012-10-01

Current theories suggest that disrupting cortical information integration may account for the mechanism of general anesthesia in suppressing consciousness. Human cognitive operations take place in hierarchically structured neural organizations in the brain. The process of low-order neural representation of sensory stimuli becoming integrated in high-order cortices is also known as cognitive binding. Combining neuroimaging, cognitive neuroscience, and anesthetic manipulation, we examined how cognitive networks involved in auditory verbal memory are maintained in wakefulness, disrupted in propofol-induced deep sedation, and re-established in recovery. Inspired by the notion of cognitive binding, an functional magnetic resonance imaging-guided connectivity analysis was utilized to assess the integrity of functional interactions within and between different levels of the task-defined brain regions. Task-related responses persisted in the primary auditory cortex (PAC), but vanished in the inferior frontal gyrus (IFG) and premotor areas in deep sedation. For connectivity analysis, seed regions representing sensory and high-order processing of the memory task were identified in the PAC and IFG. Propofol disrupted connections from the PAC seed to the frontal regions and thalamus, but not the connections from the IFG seed to a set of widely distributed brain regions in the temporal, frontal, and parietal lobes (with exception of the PAC). These later regions have been implicated in mediating verbal comprehension and memory. These results suggest that propofol disrupts cognition by blocking the projection of sensory information to high-order processing networks and thus preventing information integration. Such findings contribute to our understanding of anesthetic mechanisms as related to information and integration in the brain. Copyright © 2011 Wiley Periodicals, Inc.

International Study Group Progress Report

Energy Technology Data Exchange (ETDEWEB)

Raubenheimer, Tor O

2000-07-18

The focus of the ISG work was on advancing the accelerator design and supporting technologies. This is a complex process which involves a close interaction between theoretical analysis of the collider design and R and D progress on hardware components. The sequence of efforts took place roughly in the following order: (1) Optimization of the collider parameters and definition of system and subsystem requirements, (2) Identification of design strategies and options, and (3) Development of specific technologies to achieve these requirements. Development and testing of the required components, and R and D on manufacturing techniques have been important activities of the ISG. Experiments at the major test facilities such as the ATF at KEK and ASSET at SLAC have also played a significant role in the ISG studies.

Molecular Features of Subtype-Specific Progression from Ductal Carcinoma In Situ to Invasive Breast Cancer

Directory of Open Access Journals (Sweden)

Robert Lesurf

2016-07-01

Full Text Available Breast cancer consists of at least five main molecular “intrinsic” subtypes that are reflected in both pre-invasive and invasive disease. Although previous studies have suggested that many of the molecular features of invasive breast cancer are established early, it is unclear what mechanisms drive progression and whether the mechanisms of progression are dependent or independent of subtype. We have generated mRNA, miRNA, and DNA copy-number profiles from a total of 59 in situ lesions and 85 invasive tumors in order to comprehensively identify those genes, signaling pathways, processes, and cell types that are involved in breast cancer progression. Our work provides evidence that there are molecular features associated with disease progression that are unique to the intrinsic subtypes. We additionally establish subtype-specific signatures that are able to identify a small proportion of pre-invasive tumors with expression profiles that resemble invasive carcinoma, indicating a higher likelihood of future disease progression.

Perioperative blood ordering optimization process using information from an anesthesia information management system.

Science.gov (United States)

Rinehart, Joseph B; Lee, Tiffany C; Kaneshiro, Kayleigh; Tran, Minh-Ha; Sun, Coral; Kain, Zeev N

2016-04-01

As part of ongoing perioperative surgical home implantation process, we applied a previously published algorithm for creation of a maximum surgical blood order schedule (MSBOS) to our operating rooms. We hypothesized that using the MSBOS we could show a reduction in unnecessary preoperative blood testing and associated costs. Data regarding all surgical cases done at UC Irvine Health's operating rooms from January 1, 2011, to January 1, 2014 were extracted from the anesthesia information management systems (AIMS). After the data were organized into surgical specialties and operative sites, blood order recommendations were generated based on five specific case characteristics of the group. Next, we assessed current ordering practices in comparison to actual blood utilization to identify potential areas of wastage and performed a cost analysis comparing the annual hospital costs from preoperative blood orders if the blood order schedule were to be followed to historical practices. Of the 19,138 patients who were categorized by the MSBOS as needing no blood sample, 2694 (14.0%) had a type and screen (T/S) ordered and 1116 (5.8%) had a type and crossmatch ordered. Of the 6073 procedures where MSBOS recommended only a T/S, 2355 (38.8%) had blood crossmatched. The cost analysis demonstrated an annual reduction in actual hospital costs of $57,335 with the MSBOS compared to historical blood ordering practices. We showed that the algorithm for development of a multispecialty blood order schedule is transferable and yielded reductions in preoperative blood product screening at our institution. © 2016 AABB.

New progressive technology of flat gears processing development

Directory of Open Access Journals (Sweden)

Михайло Володимирович Маргуліс

2015-11-01

Full Text Available Relevant scientific and technical problems in relation to mechanical engineering is development of new technological processes that make it possible to achieve high accuracy and durability of machine parts that meet the requirements imposed on them. So it is important to develop a new method to make a flat gear teeth by plastic deformation of the ingot. The article deals with the actual problem of improving productivity and quality of plane wheels teeth that are widely used in advanced wave, planetary and other transmissions. A progressive method to produce flat gear teeth gear by plastic deformation of the ingot with two knurl rollers alternately moving reciprocally in the direction not intersecting the axis of the ingot mounting surface has been described in the article. The working surface of the rollers corresponds to the resulting shape of the teeth. The schemes of the teeth installing and knurling have been shown. The necessary material and the heat treatment of the knurling tools have been described. Its use will significantly increase the wear resistance of the working surfaces of the teeth and their durability as well as to increase productivity and its manufacturing costs. The material of the rollers is BC15steel. The surface layer of the knurling tools was subjected to nitration, surface hardness being up to 65 HRC. Knurling is made in the5236P shaper suited for this purpose

Achieving mask order processing automation, interoperability and standardization based on P10

Science.gov (United States)

Rodriguez, B.; Filies, O.; Sadran, D.; Tissier, Michel; Albin, D.; Stavroulakis, S.; Voyiatzis, E.

2007-02-01

Last year the MUSCLE (Masks through User's Supply Chain: Leadership by Excellence) project was presented. Here is the project advancement. A key process in mask supply chain management is the exchange of technical information for ordering masks. This process is large, complex, company specific and error prone, and leads to longer cycle times and higher costs due to missing or wrong inputs. Its automation and standardization could produce significant benefits. We need to agree on the standard for mandatory and optional parameters, and also a common way to describe parameters when ordering. A system was created to improve the performance in terms of Key Performance Indicators (KPIs) such as cycle time and cost of production. This tool allows us to evaluate and measure the effect of factors, as well as the effect of implementing the improvements of the complete project. Next, a benchmark study and a gap analysis were performed. These studies show the feasibility of standardization, as there is a large overlap in requirements. We see that the SEMI P10 standard needs enhancements. A format supporting the standard is required, and XML offers the ability to describe P10 in a flexible way. Beyond using XML for P10, the semantics of the mask order should also be addressed. A system design and requirements for a reference implementation for a P10 based management system are presented, covering a mechanism for the evolution and for version management and a design for P10 editing and data validation.

Domain-Generality of Timing-Based Serial Order Processes in Short-Term Memory: New Insights from Musical and Verbal Domains.

Directory of Open Access Journals (Sweden)

Simon Gorin

Full Text Available Several models in the verbal domain of short-term memory (STM consider a dissociation between item and order processing. This view is supported by data demonstrating that different types of time-based interference have a greater effect on memory for the order of to-be-remembered items than on memory for the items themselves. The present study investigated the domain-generality of the item versus serial order dissociation by comparing the differential effects of time-based interfering tasks, such as rhythmic interference and articulatory suppression, on item and order processing in verbal and musical STM domains. In Experiment 1, participants had to maintain sequences of verbal or musical information in STM, followed by a probe sequence, this under different conditions of interference (no-interference, rhythmic interference, articulatory suppression. They were required to decide whether all items of the probe list matched those of the memory list (item condition or whether the order of the items in the probe sequence matched the order in the memory list (order condition. In Experiment 2, participants performed a serial order probe recognition task for verbal and musical sequences ensuring sequential maintenance processes, under no-interference or rhythmic interference conditions. For Experiment 1, serial order recognition was not significantly more impacted by interfering tasks than was item recognition, this for both verbal and musical domains. For Experiment 2, we observed selective interference of the rhythmic interference condition on both musical and verbal order STM tasks. Overall, the results suggest a similar and selective sensitivity to time-based interference for serial order STM in verbal and musical domains, but only when the STM tasks ensure sequential maintenance processes.

Domain-Generality of Timing-Based Serial Order Processes in Short-Term Memory: New Insights from Musical and Verbal Domains.

Science.gov (United States)

Gorin, Simon; Kowialiewski, Benjamin; Majerus, Steve

2016-01-01

Several models in the verbal domain of short-term memory (STM) consider a dissociation between item and order processing. This view is supported by data demonstrating that different types of time-based interference have a greater effect on memory for the order of to-be-remembered items than on memory for the items themselves. The present study investigated the domain-generality of the item versus serial order dissociation by comparing the differential effects of time-based interfering tasks, such as rhythmic interference and articulatory suppression, on item and order processing in verbal and musical STM domains. In Experiment 1, participants had to maintain sequences of verbal or musical information in STM, followed by a probe sequence, this under different conditions of interference (no-interference, rhythmic interference, articulatory suppression). They were required to decide whether all items of the probe list matched those of the memory list (item condition) or whether the order of the items in the probe sequence matched the order in the memory list (order condition). In Experiment 2, participants performed a serial order probe recognition task for verbal and musical sequences ensuring sequential maintenance processes, under no-interference or rhythmic interference conditions. For Experiment 1, serial order recognition was not significantly more impacted by interfering tasks than was item recognition, this for both verbal and musical domains. For Experiment 2, we observed selective interference of the rhythmic interference condition on both musical and verbal order STM tasks. Overall, the results suggest a similar and selective sensitivity to time-based interference for serial order STM in verbal and musical domains, but only when the STM tasks ensure sequential maintenance processes.

Disabled vs nondisabled readers: perceptual vs higher-order processing of one vs three letters.

Science.gov (United States)

Allegretti, C L; Puglisi, J T

1986-10-01

12 disabled and 12 nondisabled readers (mean age, 11 yr.) were compared on a letter-search task which separated perceptual processing from higher-order processing. Participants were presented a first stimulus (for 200 msec. to minimize eye movements) followed by a second stimulus immediately to estimate the amount of information initially perceived or after a 3000-msec. interval to examine information more permanently stored. Participants were required to decide whether any letter present in the first stimulus was also present in the second. Two processing loads (1 and 3 letters) were examined. Disabled readers showed more pronounced deficits when they were given very little time to process information or more information to process.

Tracking the Progress of English Language Learners

Science.gov (United States)

Murphy, Audrey F.

2009-01-01

Educators need to document progress for English language learners, and the best structures to put into place in order to record their growth. Beginning with the stages of language proficiency, student progress can be tracked through the use of a baseline in all four language strands and the creation of rubrics to monitor performance. Language…

Make-to-order manufacturing - new approach to management of manufacturing processes

Science.gov (United States)

Saniuk, A.; Waszkowski, R.

2016-08-01

Strategic management must now be closely linked to the management at the operational level, because only in such a situation the company can be flexible and can quickly respond to emerging opportunities and pursue ever-changing strategic objectives. In these conditions industrial enterprises seek constantly new methods, tools and solutions which help to achieve competitive advantage. They are beginning to pay more attention to cost management, economic effectiveness and performance of business processes. In the article characteristics of make-to-order systems (MTO) and needs associated with managing such systems is identified based on the literature analysis. The main aim of this article is to present the results of research related to the development of a new solution dedicated to small and medium enterprises manufacture products solely on the basis of production orders (make-to- order systems). A set of indicators to enable continuous monitoring and control of key strategic areas this type of company is proposed. A presented solution includes the main assumptions of the following concepts: the Performance Management (PM), the Balanced Scorecard (BSC) and a combination of strategic management with the implementation of operational management. The main benefits of proposed solution are to increase effectiveness of MTO manufacturing company management.

Strategic WIP Inventory Positioning for Make-to-Order Production with Stochastic Processing Times

Directory of Open Access Journals (Sweden)

Jingjing Jiang

2017-01-01

Full Text Available It is vital for make-to-order manufacturers to shorten the lead time to meet the customers’ requirements. Holding work-in-process (WIP inventory at more stations can reduce the lead time, but it also brings about higher inventory holding cost. Therefore, it is important to seek out the optimal set of stations to hold WIP inventory to minimize the total inventory holding cost, while meeting the required due date for the final product at the same time. Since the problem with deterministic processing times at the stations has been addressed, as a natural extension, in this study, we address the problem with stochastic processing times, which is more realistic in the manufacturing environment. Assuming that the processing times follow normal distributions, we propose a solution procedure using genetic algorithm.

Peripheral Visual Cues: Their Fate in Processing and Effects on Attention and Temporal-Order Perception.

Science.gov (United States)

Tünnermann, Jan; Scharlau, Ingrid

2016-01-01

Peripheral visual cues lead to large shifts in psychometric distributions of temporal-order judgments. In one view, such shifts are attributed to attention speeding up processing of the cued stimulus, so-called prior entry. However, sometimes these shifts are so large that it is unlikely that they are caused by attention alone. Here we tested the prevalent alternative explanation that the cue is sometimes confused with the target on a perceptual level, bolstering the shift of the psychometric function. We applied a novel model of cued temporal-order judgments, derived from Bundesen's Theory of Visual Attention. We found that cue-target confusions indeed contribute to shifting psychometric functions. However, cue-induced changes in the processing rates of the target stimuli play an important role, too. At smaller cueing intervals, the cue increased the processing speed of the target. At larger intervals, inhibition of return was predominant. Earlier studies of cued TOJs were insensitive to these effects because in psychometric distributions they are concealed by the conjoint effects of cue-target confusions and processing rate changes.

Assessing progress in the development of safety culture

International Nuclear Information System (INIS)

Rotaru, I.; Ghita, S.; Biro, L.

2002-01-01

This paper is focussed on the organizational culture and learning processes required for the implementation of all aspects of safety culture. There is no prescriptive formula for improving safety culture. However, some common characteristics and practices are emerging that can be adopted by organizations in order to make progress. The paper refers to some approaches that have been successful in a number of countries. The experience of the international nuclear industry in the development and improvement of safety culture could be extended and found useful in other nuclear activities, irrespective of scale. The examples given of specific practice cover a wide range of activities including analysis of events, the regulatory approach on safety culture, employee participation and safety performance measures. Many of these practices may be relevant to smaller organizations and could contribute to improving safety culture, whatever the size of the organization. The most effective approach is to pursue a range of practices that can be mutually supportive in the development of a progressive safety culture, supported by professional standards, organizational and management commitment. Some guidance is also given on the assessment of safety culture and on the detection of a weakening safety culture. Few suggestions for accelerating the safety culture development and improvement process are also provided. (author)

Numerical Order Processing in Children: From Reversing the Distance-Effect to Predicting Arithmetic

Science.gov (United States)

Lyons, Ian M.; Ansari, Daniel

2015-01-01

Recent work has demonstrated that how we process the relative order--ordinality--of numbers may be key to understanding how we represent numbers symbolically, and has proven to be a robust predictor of more sophisticated math skills in both children and adults. However, it remains unclear whether numerical ordinality is primarily a by-product of…

An order-by-disorder process in the cyclic phase of spin-2 condensate with a weak magnetic field

International Nuclear Information System (INIS)

Zheng, Gong-Ping; Xu, Lei-Kuan; Qin, Shuai-Feng; Jian, Wen-Tian; Liang, J.-Q.

2013-01-01

We present in this paper a model study on the “order-by-disorder” process in the cyclic phase of spin-2 condensate, which forms a family of incommensurable, spiral degenerate ground states. On the basis of the ordering mechanism of entropic splitting, it is demonstrated that the energy corrections resulting from quantum fluctuations of disorder lift the accidental degeneracy of the cyclic configurations and thus lead to an eventual spiral order called the cyclic order. The order-by-disorder phenomenon is then realized even if the magnetic field exists. Finally, we show that our theoretic observations can be verified experimentally by direct detection of the cyclic order in the 87 Rb condensate of a spin-2 manifold with a weak magnetic field. -- Highlights: •A model for the order-by-disorder process in the cyclic phase of spin-2 condensate is presented. •The second-order quantum fluctuations of the mean-field states are studied. •The energy corrections lift the accidental degeneracy of the cyclic configurations. •The order-by-disorder phenomenon is realized even if a magnetic field exists. •The theoretic observations can be verified experimentally for 87 Rb condensate

Progress report 1981

International Nuclear Information System (INIS)

Chalupka, A.; Dirninger, G.

1982-01-01

The progress report describes the scientific work and research results of the institute for radium research and nuclear physics of the Austrian Academy of Sciences for the period of 1981. The progress report covers the subject areas of nuclear theory, nuclear model calculations, experimental nuclear physics and neutron involved reactions, medium energy physics, instrumentation and detectors, evaluation of nuclear data and numerical data processing, dating, applications in medicine, dosimetry and environmental studies. A list of publications of this institute is given. (A.N.)

Progress report 1982

International Nuclear Information System (INIS)

Chalupka, A.; Wild, E.; Dirninger, G.

1983-01-01

The progress report describes the scientific work and research results of the institute for radium research and nuclear physics of the Austrian Academy of Sciences for the period of 1982. The progress report covers the subject areas of nuclear theory, nuclear model calculations, experimental nuclear physics and neutron involved reactions, medium energy physics, instrumentation and detectors, evaluation of nuclear data and numerical data processing, dating, applications in medicine, dosimetry and environmental studies. A list of publications of this institute is given. (A.N.)

Birth order effects on the separation process in young adults: an evolutionary and dynamic approach.

Science.gov (United States)

Ziv, Ido; Hermel, Orly

2011-01-01

The present study analyzes the differential contribution of a familial or social focus in imaginative ideation (the personal fable and imagined audience mental constructs) to the separation-individuation process of firstborn, middleborn, and lastborn children. A total of 160 young adults were divided into 3 groups by birth order. Participants' separation-individuation process was evaluated by the Psychological Separation Inventory, and results were cross-validated by the Pathology of Separation-Individuation Inventory. The Imaginative Ideation Inventory tested the relative dominance of the familial and social environments in participants' mental constructs. The findings showed that middleborn children had attained more advanced separation and were lower in family-focused ideation and higher in nonfamilial social ideation. However, the familial and not the social ideation explained the variance in the separation process in all the groups. The findings offer new insights into the effects of birth order on separation and individuation in adolescents and young adults.

Second-order processing of four-stroke apparent motion.

Science.gov (United States)

Mather, G; Murdoch, L

1999-05-01

In four-stroke apparent motion displays, pattern elements oscillate between two adjacent positions and synchronously reverse in contrast, but appear to move unidirectionally. For example, if rightward shifts preserve contrast but leftward shifts reverse contrast, consistent rightward motion is seen. In conventional first-order displays, elements reverse in luminance contrast (e.g. light elements become dark, and vice-versa). The resulting perception can be explained by responses in elementary motion detectors turned to spatio-temporal orientation. Second-order motion displays contain texture-defined elements, and there is some evidence that they excite second-order motion detectors that extract spatio-temporal orientation following the application of a non-linear 'texture-grabbing' transform by the visual system. We generated a variety of second-order four-stroke displays, containing texture-contrast reversals instead of luminance contrast reversals, and used their effectiveness as a diagnostic test for the presence of various forms of non-linear transform in the second-order motion system. Displays containing only forward or only reversed phi motion sequences were also tested. Displays defined by variation in luminance, contrast, orientation, and size were effective. Displays defined by variation in motion, dynamism, and stereo were partially or wholly ineffective. Results obtained with contrast-reversing and four-stroke displays indicate that only relatively simple non-linear transforms (involving spatial filtering and rectification) are available during second-order energy-based motion analysis.

Progress of the ITER Correction Coils in China

CERN Document Server

Wei, J; Han, S; Yu, X; Du, S; Li, C; Fang, C; Wang, L; Zheng, W; Liu, L; Wen, J; Li, H; Libeyre, P; Dolgetta, N; Cormany, C; Sgobba, S

2014-01-01

The ITER Correction Coils (CC) include three sets of six coils each, distributed symmetrically around the tokamak to correct error fields. Each pair of coils, located on opposite sides of the tokamak, is series connected with polarity to produce asymmetric fields. The manufacturing of these superconducting coils is undergoing qualification of the main fabrication processes: winding into multiple pancakes, welding helium inlet/outlet on the conductor jacket, turn and ground insulation, vacuum pressure impregnation, inserting into an austenitic stainless steel case, enclosure welding, and assembling the terminal service box. It has been proceeding by an intense phase of R\\&D, trials tests, and final adjustment of the tooling. This paper mainly describes the progress in ASIPP for the CC manufacturing process before and on qualification phase and the status of corresponding equipment which are ordered or designed for each process. Some test results for the key component and procedure are also presented.

Optimal tax progressivity in imperfect labour markets

DEFF Research Database (Denmark)

Sørensen, Peter Birch

1999-01-01

that there may be an optimal degree of tax progressivity where the marginal welfare gain from reduced involuntary unemployment is just offset by the marginal welfare loss from lower productivity. This paper sets up four different models of an imperfect labour market in order to identify the degree of tax......All modern labour market theories capable of explaining involuntary unemployment as an equilibrium phenomenon imply that increased income tax progressivity reduces unemployment, but they also imply that higher progressivity tends to reduce work effort and labour productivity. This suggests...

The progressive achievement of a closed fuel cycle in France; La mise en oeuvre progressive d'un cycle ferme en France

Energy Technology Data Exchange (ETDEWEB)

Hugelmann, D.; Devezeaux de Lavergne, J.G. [AREVA NC, 78 - Velizy Villacoublay (France)

2008-03-15

The author reviews the progressive building of a strong nuclear fuel cycle industry in France. The first major step was the abandon of the graphite-gas reactor system to the PWR system. The government's decision to opt for reactors operating with enriched uranium opened the way to the application at an industrial scale of uranium enrichment technology that was only confined to military purposes. The legal entity 'EURODIF S A' was founded at that time and the different production units of the George-Besse-1 enrichment plant entered into service progressively from 1978 to 1982. The Comurhex company was created in 1969, and was in charge of producing the uranium hexafluoride necessary to the fabrication of nuclear fuels. La-Hague plant entered into service in 1966, its aim was to process spent fuels from graphite-gas reactors. Inside this plant the HAO (High Activity Oxide) dedicated to PWR spent fuels was operating in 1974. The MELOX plant dedicated to the fabrication of mixed oxides fuels (Mox) entered into operation in 1995 (till now more than 5000 Mox assemblies have been fabricated. Another important step was the processing of Mox fuels. During these 30 years, the nuclear industry has made impressing progress concerning: the increase of burn-up rates, the performance of fuels, the increase in the volume being processed, the packaging of radioactive wastes, the development of nuclear transport, and a reduction of the impact on the environment. In order to maintain its level of performance the nuclear industry has made important investments concerning: mining (a global investment of 2.3*10{sup 9} euros), Comurhex-2 (a 610*10{sup 6} euros investment) and Georges-Besse-2 plant (a 3*10{sup 9} euros investment for the enrichment of uranium through centrifugation). (A.C.)

Progress on uncooled PbSe detectors for low-cost applications

Science.gov (United States)

Vergara, German; Gomez, Luis J.; Villamayor, Victor; Alvarez, M.; Rodrigo, Maria T.; del Carmen Torquemada, Maria; Sanchez, Fernando J.; Verdu, Marina; Diezhandino, Jorge; Rodriguez, Purificacion; Catalan, Irene; Almazan, Rosa; Plaza, Julio; Montojo, Maria T.

2004-08-01

This work reports on progress on development of polycrystalline PbSe infrared detectors at the Centro de Investigacion y Desarrollo de la Armada (CIDA). Since mid nineties, the CIDA owns an innovative technology for processing uncooled MWIR detectors of polycrystalline PbSe. Based on this technology, some applications have been developed. However, future applications demand smarter, more complex, faster yet cheaper detectors. Aiming to open new perspectives to polycrystalline PbSe detectors, we are currently working on different directions: 1) Processing of 2D arrays: a) Designing and processing low density x-y addressed arrays with 16x16 and 32x32 elements, as an extension of our standard technology. b) Trying to make compatible standard CMOS and polycrystalline PbSe technologies in order to process monolithic large format arrays. 2) Adding new features to the detector such as monolithically integrated spectral discrimination.

ANL progress on the cooperation with CNEA for the MO-99 production: Base-side digestion process

International Nuclear Information System (INIS)

Gelis, A.V.; Quigley, K.J.; Aase, S.B.; Bakel, A.J.; Leyva, A.; Regalbuto, M.C.; Vandergrift, G.F.

2005-01-01

Conversion from high-enriched uranium (HEU) to low-enriched uranium (LEU) targets for the Mo-99 production requires certain modifications of the target design, the digestion and the purification processes. ANL and the Argentine Comision Nacional de Energia Atomica (CNEA) are collaborating to overcome all the concerns caused by the conversion of the CNEA process to use LEU foil targets. A new digester with stirring system has been successfully applied for the digestion of the low burn-up U foil targets in KMnO 4 alkaline media. In this paper, we report the progress on the development of the digestion procedure utilizing effective stirring and focusing on minimization of the liquid radioactive waste. (author)

Chronic progressive multiple sclerosis

International Nuclear Information System (INIS)

Buffoli, A.; Micheletti, E.; Capra, R.; Mattioli, F.; Marciano', N.

1991-01-01

A long-lasting immunological suppression action seems to be produced by total lymphoid irradiation; some authors emphasize the favorable effect of this treatment on chronic progressive multiple sclerosis. In order to evaluate the actual role of TLI, 6 patients affected with chronic progressive multiple sclerosis were submitted to TLI with shaped and personalized fields at the Istituto del Radio, University of Brescia, Italy. The total dose delivered was 19.8 Gy in 4 weeks, 1.8 Gy/day, 5d/w; a week elapsed between the first and the second irradiation course. Disability according to Kurtzke scale was evaluated, together with blood lymphocyte count and irradiation side-effects, over a mean follow-up period of 20.8 months (range: 13-24). Our findings indicate that: a) disease progression was not markedly reduced by TLI; b) steroid hormones responsivity was restored after irradiation, and c) side-effects were mild and tolerable

Generating higher-order quantum dissipation from lower-order parametric processes

Science.gov (United States)

Mundhada, S. O.; Grimm, A.; Touzard, S.; Vool, U.; Shankar, S.; Devoret, M. H.; Mirrahimi, M.

2017-06-01

The stabilisation of quantum manifolds is at the heart of error-protected quantum information storage and manipulation. Nonlinear driven-dissipative processes achieve such stabilisation in a hardware efficient manner. Josephson circuits with parametric pump drives implement these nonlinear interactions. In this article, we propose a scheme to engineer a four-photon drive and dissipation on a harmonic oscillator by cascading experimentally demonstrated two-photon processes. This would stabilise a four-dimensional degenerate manifold in a superconducting resonator. We analyse the performance of the scheme using numerical simulations of a realisable system with experimentally achievable parameters.

Realization of radiation-chemical processes in national economy-important stage of scientific and technical progress

International Nuclear Information System (INIS)

Breger, A.Kh.

1975-01-01

Realization of energy resourses of the atomic power engineering will greatly contribute to the scientific and technological progress. The dominat role play the radiochemical methods of properties modification applied for the well-known materials and for the production of materials with modern operating characteristics necessary for their application in different branches of industry and agriculture. Radiation modeling of products from polyolefine, wood-plastic and concrete-polymer materials are considered as well as the processes in ''thin'' units of agitating systems. The future developments and present state of the art of radiation sources are presented

78 FR 37242 - Request for Public Comments: Interagency Review of Exclusion Order Enforcement Process

Science.gov (United States)

2013-06-20

...'s interagency review of exclusion order enforcement processes called for by the 2013 Joint Strategic... (202) 395-1808 to arrange for an alternate method of transmission. The regulations.gov Web site is a... not include in your comments information of a confidential nature, such as sensitive personal...

Anisotropic intermolecular interaction and rotational ordering in hydrogen-containing solids. Progress report No. 12

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

Progress is reviewed in these areas: nuclear spin-lattice relaxation in ortho-para mixtures of solid deuterium below T/sub lambda/; pulsed NMR experiments of matrix isolated HCl; stimulated Raman scattering in solid hydrogen and nitrogen; and infrared line broadening of matrix isolated molecules. (GHT)

Anisotropic intermolecular interaction and rotational ordering in hydrogen-containing solids. Progress report No. 12

International Nuclear Information System (INIS)

1976-01-01

Progress is reviewed in these areas: nuclear spin-lattice relaxation in ortho-para mixtures of solid deuterium below T/sub lambda/; pulsed NMR experiments of matrix isolated HCl; stimulated Raman scattering in solid hydrogen and nitrogen; and infrared line broadening of matrix isolated molecules

Recent progress of ordered mesoporous silica-supported chiral metallic catalysts

Directory of Open Access Journals (Sweden)

LIU Rui

2013-02-01

Full Text Available Recently,ordered silica-based mesoporous chiral organometallics-functionalized heterogeneous catalysts have attracted extensive research interest due to their excellent properties,such as easy preparation,high activity and convenient recycle.This review mainly summarizesthe generally prepared strategy and the silica-based organometallics-functionalized heterogeneous catalysts reported in the literatures.

The European Arctic policy in progress

Science.gov (United States)

Conde Pérez, Elena; Yaneva, Zhaklin Valerieva

2016-09-01

The geostrategic, political, economic, and scientific relevance of the Arctic is constantly growing due to the complex process of climate change. Accordingly, the European Union-as a global political actor-, is already taking steps to ensure and strengthen its influence in the region while demonstrating readiness to face the many opportunities and challenges ahead in cooperation with the traditional stakeholders. Therefore, in order to reflect the renewed importance of the Arctic transformation, the Union has been designing its Arctic Policy focusing on climate change mitigation and multilateral cooperation as its main strengths. Unfortunately, despite the diligence and impetus that has been invested, this process has been delayed in several occasions as the Union had to deal with internal and external destabilizing factors, such as the later immigration crisis or the lack of uniformity among its member states' foreign policy interests. These factors will be analyzed along with the process of creation and development of the EU's Arctic policy. Despite some delays, on 27 April 2016, the long-awaited third communication was issued and progress has been made: even if, in general terms, the new document remains a political statement, there is also a clear commitment to action.

The third order correction on Hawking radiation and entropy conservation during black hole evaporation process

Energy Technology Data Exchange (ETDEWEB)

Yan, Hao-Peng; Liu, Wen-Biao, E-mail: wbliu@bnu.edu.cn

2016-08-10

Using Parikh–Wilczek tunneling framework, we calculate the tunneling rate from a Schwarzschild black hole under the third order WKB approximation, and then obtain the expressions for emission spectrum and black hole entropy to the third order correction. The entropy contains four terms including the Bekenstein–Hawking entropy, the logarithmic term, the inverse area term, and the square of inverse area term. In addition, we analyse the correlation between sequential emissions under this approximation. It is shown that the entropy is conserved during the process of black hole evaporation, which consists with the request of quantum mechanics and implies the information is conserved during this process. We also compare the above result with that of pure thermal spectrum case, and find that the non-thermal correction played an important role.

Is general intelligence little more than the speed of higher-order processing?

Science.gov (United States)

Schubert, Anna-Lena; Hagemann, Dirk; Frischkorn, Gidon T

2017-10-01

Individual differences in the speed of information processing have been hypothesized to give rise to individual differences in general intelligence. Consistent with this hypothesis, reaction times (RTs) and latencies of event-related potential have been shown to be moderately associated with intelligence. These associations have been explained either in terms of individual differences in some brain-wide property such as myelination, the speed of neural oscillations, or white-matter tract integrity, or in terms of individual differences in specific processes such as the signal-to-noise ratio in evidence accumulation, executive control, or the cholinergic system. Here we show in a sample of 122 participants, who completed a battery of RT tasks at 2 laboratory sessions while an EEG was recorded, that more intelligent individuals have a higher speed of higher-order information processing that explains about 80% of the variance in general intelligence. Our results do not support the notion that individuals with higher levels of general intelligence show advantages in some brain-wide property. Instead, they suggest that more intelligent individuals benefit from a more efficient transmission of information from frontal attention and working memory processes to temporal-parietal processes of memory storage. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Aligning interprofessional education collaborative sub-competencies to a progression of learning.

Science.gov (United States)

Patel Gunaldo, Tina; Brisolara, Kari Fitzmorris; Davis, Alison H; Moore, Robert

2017-05-01

In the United States, the Interprofessional Education Collaborative (IPEC) developed four core competencies for interprofessional collaborative practice. Even though the IPEC competencies and respective sub-competencies were not created in a hierarchal manner, one might reflect upon a logical progression of learning as well as learners accruing skills allowing them to master one level of learning and building on the aggregate of skills before advancing to the next level. The Louisiana State University Health-New Orleans Center for Interprofessional Education and Collaborative Practice (CIPECP) determined the need to align the sub-competencies with the level of behavioural expectations in order to simplify the process of developing an interprofessional education experience targeted to specific learning levels. In order to determine the most effective alignment, CIPECP discussions revolved around current programmatic expectations across the institution. Faculty recognised the need to align sub-competencies with student learning objectives. Simultaneously, a progression of learning existing within each of the four IPEC domains was noted. Ultimately, the faculty and staff team agreed upon categorising the sub-competencies in a hierarchical manner for the four domains into either a "basic, intermediate, or advanced" level of competency.

Photo-physics of third-order nonlinear optical processes in organic dyes

International Nuclear Information System (INIS)

Delysse, Stephane

1997-01-01

We study some aspects of the nonlinear picosecond photo-physics in organic dyes using Kerr ellipsometry. The aim is to establish link between the photo-physics and nonlinear optics in these compounds. First, we study coherent processes directly linked to the third-order susceptibility. Thus, we measure two-photon absorption spectra of large internal charge transfer dyes. We take into account all coupling between three electronic states which can interfere to explain the particular response of some stilbene dyes. On the second hand, we expose a more photophysical approach to determine the S 1 → S n transition energies and moments using the measurement of excited state absorption cross sections. These results allow the prediction of the susceptibilities relevant to alternative nonlinear optical methods. Nevertheless, the stationary approach hides the complex relaxation processes which can take place in organic dyes. As an illustration, we study the formation and disappearance of a TICT (Twisted intramolecular charge transfer) in a pyrylium salt in solvents of increasing viscosity. (author) [fr

Mediating Justice: Women's Perceptions of Fairness in the Civil Protection Order Process.

Science.gov (United States)

Hefner, M Kristen; Baboolal, Aneesa A; Fleury-Steiner, Ruth E; Miller, Susan L

2018-05-01

Mediation use has grown rapidly in the past few decades as an efficacious method of civil dispute resolution. However, early research suggests that civil mediation may cause further harm to victims of intimate partner abuse because, based on the inherent power dynamics of abusive relationships, they are not able to effectively advocate on their own behalf. In addition, organizational efficiency concerns have led to the development of consent processes for civil protection orders (POs). However, research has yet to examine the extent to which victims of intimate partner violence who take part in these consent processes perceive the process and associated outcomes as fair. Using qualitative data ( N = 19 interviews) collected from women who sought civil POs through Family Court in Delaware, this research finds that the consent process and women's interactions with mediators reproduce power inequalities that are inherent in cases of intimate partner abuse, which shape their perceptions of fairness in the PO process and outcomes. Victims being silenced and disempowered throughout the consent process results in cumulative effects-similar tactics used by batterers-which continue to leave victims vulnerable. In addition, the power asymmetry victims experience in abusive relationships is replicated by the legal institution and court structure in terms of not having access to attorneys, not receiving guidance and advocacy, and, at times, experiencing insensitive treatment. Thus, this study provides insight into the inequalities present within the PO consent process that can create further harm to victims.

ADI splitting schemes for a fourth-order nonlinear partial differential equation from image processing

KAUST Repository

Calatroni, Luca

2013-08-01

We present directional operator splitting schemes for the numerical solution of a fourth-order, nonlinear partial differential evolution equation which arises in image processing. This equation constitutes the H -1-gradient flow of the total variation and represents a prototype of higher-order equations of similar type which are popular in imaging for denoising, deblurring and inpainting problems. The efficient numerical solution of this equation is very challenging due to the stiffness of most numerical schemes. We show that the combination of directional splitting schemes with implicit time-stepping provides a stable and computationally cheap numerical realisation of the equation.

ADI splitting schemes for a fourth-order nonlinear partial differential equation from image processing

KAUST Repository

Calatroni, Luca; Dü ring, Bertram; Schö nlieb, Carola-Bibiane

2013-01-01

We present directional operator splitting schemes for the numerical solution of a fourth-order, nonlinear partial differential evolution equation which arises in image processing. This equation constitutes the H -1-gradient flow of the total variation and represents a prototype of higher-order equations of similar type which are popular in imaging for denoising, deblurring and inpainting problems. The efficient numerical solution of this equation is very challenging due to the stiffness of most numerical schemes. We show that the combination of directional splitting schemes with implicit time-stepping provides a stable and computationally cheap numerical realisation of the equation.

Modeling the self-assembly of ordered nanoporous materials

Energy Technology Data Exchange (ETDEWEB)

Monson, Peter [Univ. of Massachusetts, Amherst, MA (United States); Auerbach, Scott [Univ. of Massachusetts, Amherst, MA (United States)

2017-11-13

This report describes progress on a collaborative project on the multiscale modeling of the assembly processes in the synthesis of nanoporous materials. Such materials are of enormous importance in modern technology with application in the chemical process industries, biomedicine and biotechnology as well as microelectronics. The project focuses on two important classes of materials: i) microporous crystalline materials, such as zeolites, and ii) ordered mesoporous materials. In the first case the pores are part of the crystalline structure, while in the second the structures are amorphous on the atomistic length scale but where surfactant templating gives rise to order on the length scale of 2 - 20 nm. We have developed a modeling framework that encompasses both these kinds of materials. Our models focus on the assembly of corner sharing silica tetrahedra in the presence of structure directing agents. We emphasize a balance between sufficient realism in the models and computational tractibility given the complex many-body phenomena. We use both on-lattice and off-lattice models and the primary computational tools are Monte Carlo simulations with sampling techniques and ensembles appropriate to specific situations. Our modeling approach is the first to capture silica polymerization, nanopore crystallization, and mesopore formation through computer-simulated self assembly.

Progressive and Regressive Developmental Changes in Neural Substrates for Face Processing: Testing Specific Predictions of the Interactive Specialization Account

Science.gov (United States)

Joseph, Jane E.; Gathers, Ann D.; Bhatt, Ramesh S.

2011-01-01

Face processing undergoes a fairly protracted developmental time course but the neural underpinnings are not well understood. Prior fMRI studies have only examined progressive changes (i.e. increases in specialization in certain regions with age), which would be predicted by both the Interactive Specialization (IS) and maturational theories of…

Recent progress on high-speed optical transmission

Directory of Open Access Journals (Sweden)

Jianjun Yu

2016-05-01

Full Text Available The recently reported high spectral efficiency (SE and high-baud-rate signal transmission are all based on digital coherent optical communications and digital signal processing (DSP. DSP simplifies the reception of advanced modulation formats and also enables the major electrical and optical impairments to be processed and compensated in the digital domain, at the transmitter or receiver side. In this paper, we summarize the research progress on high-speed signal generation and detection and also show the progress on DSP for high-speed signal detection. We also report the latest progress on multi-core and multi-mode multiplexing.

Planck 2015 results: VII. High Frequency Instrument data processing: Time-ordered information and beams

International Nuclear Information System (INIS)

Adam, R.; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.

2016-01-01

The Planck High Frequency Instrument (HFI) has observed the full sky at six frequencies (100, 143, 217, 353, 545, and 857 GHz) in intensity and at four frequencies in linear polarization (100, 143, 217, and 353 GHz). In order to obtain sky maps, the time-ordered information (TOI) containing the detector and pointing samples must be processed and the angular response must be assessed. The full mission TOI is included in the Planck 2015 release. This study describes the HFI TOI and beam processing for the 2015 release. HFI calibration and map making are described in a companion paper. The main pipeline has been modified since the last release (2013 nominal mission in intensity only), by including a correction for the nonlinearity of the warm readout and by improving the model of the bolometer time response. The beam processing is an essential tool that derives the angular response used in all the Planck science papers and we report an improvement in the effective beam window function uncertainty of more than a factor of 10 relative to the2013 release. Noise correlations introduced by pipeline filtering function are assessed using dedicated simulations. Finally, angular cross-power spectra using data sets that are decorrelated in time are immune to the main systematic effects.

Measurements of scattering processes in negative ion-atom collisions: Progress report, 1 September 1988--31 August 1989

International Nuclear Information System (INIS)

Kvale, T.J.

1989-01-01

The main emphasis of this research effort is the simultaneous study of several of the scattering processes that occur in negative ion-atom collisions. These include: elastic scattering, target excitation/ionization, single electron detachment, and double electron detachment. The measurements will provide absolute total and differential cross sections for the aforementioned processes. These are extremely valuable in providing stringent tests of the approximations used in the various theoretical calculations. This period covers the first year of the grant and the vast majority of the activity was directed toward construction of the apparatus needed to carry out the proposed measurements. Progress toward these goals are summarized. 2 refs., 1 fig

Investigating local network interactions underlying first- and second-order processing.

Science.gov (United States)

Ellemberg, Dave; Allen, Harriet A; Hess, Robert F

2004-01-01

We compared the spatial lateral interactions for first-order cues to those for second-order cues, and investigated spatial interactions between these two types of cues. We measured the apparent modulation depth of a target Gabor at fixation, in the presence and the absence of horizontally flanking Gabors. The Gabors' gratings were either added to (first-order) or multiplied with (second-order) binary 2-D noise. Apparent "contrast" or modulation depth (i.e., the perceived difference between the high and low luminance regions for the first-order stimulus, or between the high and low contrast regions for the second-order stimulus) was measured with a modulation depth-matching paradigm. For each observer, the first- and second-order Gabors were equated for apparent modulation depth without the flankers. Our results indicate that at the smallest inter-element spacing, the perceived reduction in modulation depth is significantly smaller for the second-order than for the first-order stimuli. Further, lateral interactions operate over shorter distances and the spatial frequency and orientation tuning of the suppression effect are broader for second- than first-order stimuli. Finally, first- and second-order information interact in an asymmetrical fashion; second-order flankers do not reduce the apparent modulation depth of the first-order target, whilst first-order flankers reduce the apparent modulation depth of the second-order target.

Progressive Web applications

CERN Multimedia

CERN. Geneva

2017-01-01

Progressive Web Applications are native-like applications running inside of a browser context. In my presentation I would like describe their characteristics, benchmarks and building process using a quick and simple case study example with focus on Service Workers api.

Formal Learning Sequences and Progression in the Studio: A Framework for Digital Design Education

Directory of Open Access Journals (Sweden)

Pontus Wärnestål

2016-02-01

Full Text Available This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the digital space. We present a framework derived from literature on design, creativity, and theories on learning that: (a implements a theory of formal learning sequences as a user-centered design process in the studio; and (b describes design challenge progressions in the design studio environment modeled in seven dimensions. The framework can be used as a tool for designing, evaluating, and communicating course progressions within – and between series of – design studio courses. This approach is evaluated by implementing a formal learning sequence framework in a series of design studio courses that progress in an undergraduate design-oriented Informatics program. Reflections from students, teachers, and external clients indicate high student motivation and learning goal achievement, high teacher satisfaction and skill development, and high satisfaction among external clients.

Mixing processes in high-level waste tanks. 1998 annual progress report

International Nuclear Information System (INIS)

Peterson, P.F.

1998-01-01

Flammable gases can be generated in DOE high-level waste tanks, including radiolytic hydrogen, and during cesium precipitation from salt solutions, benzene. Under normal operating conditions the potential for deflagration or detonation from these gases is precluded by purging and ventilation systems, which remove the flammable gases and maintain a well-mixed condition in the tanks. Upon failure of the ventilation system, due to seismic or other events, however, it has proven more difficult to make strong arguments for well-mixed conditions, due to the potential for density-induced stratification which can potentially sequester fuel or oxidizer at concentrations significantly higher than average. This has complicated the task of defining the safety basis for tank operation. Waste-tank mixing processes have considerable overlap with similar large-enclosure mixing processes that occur in enclosure fires and nuclear reactor containments. Significant differences also exist, so that modeling techniques that have been developed previously can not be directly applied to waste tanks. In particular, mixing of air introduced through tank roof penetrations by buoyancy and pressure driven exchange flows, mixed convection induced by an injected high-velocity purge jet interacting with buoyancy driven flow, and onset and breakdown of stable stratification under the influence of an injected jet have not been adequately studied but are important in assessing the potential for accumulation of high-concentration pockets of fuel and oxygen. Treating these phenomena requires a combination of experiments and the development of new, more general computational models than those that have been developed for enclosure fires. U.C. Berkeley is now completing the second year of its three-year project that started in September, 1996. Excellent progress has been made in several important areas related to waste-tank ventilation and mixing processes.'

Simulation study of the initial crystallization processes of poly(3-hexylthiophene) in solution: ordering dynamics of main chains and side chains.

Science.gov (United States)

Takizawa, Yuumi; Shimomura, Takeshi; Miura, Toshiaki

2013-05-23

We study the initial nucleation dynamics of poly(3-hexylthiophene) (P3HT) in solution, focusing on the relationship between the ordering process of main chains and that of side chains. We carried out Langevin dynamics simulation and found that the initial nucleation processes consist of three steps: the ordering of ring orientation, the ordering of main-chain vectors, and the ordering of side chains. At the start, the normal vectors of thiophene rings aligned in a very short time, followed by alignment of main-chain end-to-end vectors. The flexible side-chain ordering took almost 5 times longer than the rigid-main-chain ordering. The simulation results indicated that the ordering of side chains was induced after the formation of the regular stack structure of main chains. This slow ordering dynamics of flexible side chains is one of the factors that cause anisotropic nuclei growth, which would be closely related to the formation of nanofiber structures without external flow field. Our simulation results revealed how the combined structure of the planar and rigid-main-chain backbones and the sparse flexible side chains lead to specific ordering behaviors that are not observed in ordinary linear polymer crystallization processes.

Lot-Order Assignment Applying Priority Rules for the Single-Machine Total Tardiness Scheduling with Nonnegative Time-Dependent Processing Times

Directory of Open Access Journals (Sweden)

Jae-Gon Kim

2015-01-01

Full Text Available Lot-order assignment is to assign items in lots being processed to orders to fulfill the orders. It is usually performed periodically for meeting the due dates of orders especially in a manufacturing industry with a long production cycle time such as the semiconductor manufacturing industry. In this paper, we consider the lot-order assignment problem (LOAP with the objective of minimizing the total tardiness of the orders with distinct due dates. We show that we can solve the LOAP optimally by finding an optimal sequence for the single-machine total tardiness scheduling problem with nonnegative time-dependent processing times (SMTTSP-NNTDPT. Also, we address how the priority rules for the SMTTSP can be modified to those for the SMTTSP-NNTDPT to solve the LOAP. In computational experiments, we discuss the performances of the suggested priority rules and show the result of the proposed approach outperforms that of the commercial optimization software package.

Measurements of scattering processes in negative ion: Atom collisions. Technical progress report, 1 September 1991--31 December 1994

International Nuclear Information System (INIS)

Kvale, T.J.

1994-01-01

This report describes the progress made on the research objectives during the past three years of the grant. This research project is designed to study various scattering processes which occur in H - collisions with atomic (specifically, noble gas and atomic hydrogen) targets in the intermediate energy region. These processes include: elastic scattering, single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H - is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements will provide total cross sections (TCS) initially, and once the angular positioning apparatus is installed, will provide angular differential cross sections (ADCS)

Students' Progress throughout Examination Process as a Markov Chain

Science.gov (United States)

Hlavatý, Robert; Dömeová, Ludmila

2014-01-01

The paper is focused on students of Mathematical methods in economics at the Czech university of life sciences (CULS) in Prague. The idea is to create a model of students' progress throughout the whole course using the Markov chain approach. Each student has to go through various stages of the course requirements where his success depends on the…

The actual technological progress of NPPs

International Nuclear Information System (INIS)

Florescu, Gheorghe; Popa, Adrian; Panaitescu, Valeriu

2010-01-01

The actual nuclear R and D issues require new technologies and continuous progress in order to find adequate and effective solutions in sustained and increasing energy demand. The current tendency in energy consumption and occurring of large consumers, especially from Asian countries, imposes finding new means for energy clean, large scale and sustained production. NPPs reliability and availability were permanently monitored and improved; in the mean time the safety of the nuclear energy production was under surveillance. Corresponding development of the new technologies and discovery of improved materials and adequate technological processes offers the possibilities for appropriate implementation and use of them in the NPPs systems configuration and functioning/operation. The modern technologies and scientific discoveries, also the international cooperation, offer the opportunities to brake the actual barriers in order to cumulate and use advanced energy production processes in finding new energy sources and to build improved, reliable and safety power plants. The monitoring systems, intelligent sensors and intelligent SSCs, nanotechnologies and and modern and intelligent materials constitute the main reasons in improvement of the NPPs systems configuration and processes. The paper presents: - The state of the art in the level of actual and useful technologies for nuclear power systems development; - The actual technological limits that need to be over passed for NPPs systems improvements; - The main systems that need improvement and reconfiguration for actual NPPs development and increase in efficient operation, appropriate availability and total safety; - The actual energy production issues; - The key arguments in sustaining the R and D new NPPs systems development; - Future trends in NPPs development; - The limitations in industrial processes knowledge and use. Appropriate R and D in the field of NPPs systems has a specific characteristic that is highlighted in

Applying Item Response Theory methods to design a learning progression-based science assessment

Science.gov (United States)

Chen, Jing

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1) how to use items in different formats to classify students into levels on the learning progression, (2) how to design a test to give good information about students' progress through the learning progression of a particular construct and (3) what characteristics of test items support their use for assessing students' levels. Data used for this study were collected from 1500 elementary and secondary school students during 2009--2010. The written assessment was developed in several formats such as the Constructed Response (CR) items, Ordered Multiple Choice (OMC) and Multiple True or False (MTF) items. The followings are the main findings from this study. The OMC, MTF and CR items might measure different components of the construct. A single construct explained most of the variance in students' performances. However, additional dimensions in terms of item format can explain certain amount of the variance in student performance. So additional dimensions need to be considered when we want to capture the differences in students' performances on different types of items targeting the understanding of the same underlying progression. Items in each item format need to be improved in certain ways to classify students more accurately into the learning progression levels. This study establishes some general steps that can be followed to design other learning progression-based tests as well. For example, first, the boundaries between levels on the IRT scale can be defined by using the means of the item thresholds across a set of good items. Second, items in multiple formats can be selected to achieve the information criterion at all

Computer simulation of phase separation and ordering processes in low-dimensional systems

DEFF Research Database (Denmark)

Mouritsen, O.G.; Shah, P.J.; Vitting Andersen, J.

1991-01-01

An account is given of recent activity in the field of dynamics of phase separation and ordering processes in two-dimensional statistical mechanical models. The fundamental questions of the dynamics involve the form of the growth law, the value of the growth exponent, the dynamical scaling...... properties, and a possible universal classification of the late-stage dynamics. Evidence from kinetic lattice model calculations using computer-simulation techniques is presented in favor of a universal description of the dynamics in terms of algebraic growth laws with exponents which only depend...

Deterministic flows of order-parameters in stochastic processes of quantum Monte Carlo method

International Nuclear Information System (INIS)

Inoue, Jun-ichi

2010-01-01

In terms of the stochastic process of quantum-mechanical version of Markov chain Monte Carlo method (the MCMC), we analytically derive macroscopically deterministic flow equations of order parameters such as spontaneous magnetization in infinite-range (d(= ∞)-dimensional) quantum spin systems. By means of the Trotter decomposition, we consider the transition probability of Glauber-type dynamics of microscopic states for the corresponding (d + 1)-dimensional classical system. Under the static approximation, differential equations with respect to macroscopic order parameters are explicitly obtained from the master equation that describes the microscopic-law. In the steady state, we show that the equations are identical to the saddle point equations for the equilibrium state of the same system. The equation for the dynamical Ising model is recovered in the classical limit. We also check the validity of the static approximation by making use of computer simulations for finite size systems and discuss several possible extensions of our approach to disordered spin systems for statistical-mechanical informatics. Especially, we shall use our procedure to evaluate the decoding process of Bayesian image restoration. With the assistance of the concept of dynamical replica theory (the DRT), we derive the zero-temperature flow equation of image restoration measure showing some 'non-monotonic' behaviour in its time evolution.

Radionuclides for process control and inspection

International Nuclear Information System (INIS)

Hadden, R.J.B.

1987-01-01

Radiation sources have been used in process control for over 40 years. Their use in inspection, implying visual examination, although of much earlier origin in the form of gamma radiography, is also of recent emergence in the form of tomographic methods. This paper firstly reviews the justification for the continued world-wide usage of isotopic methods. It then reviews a selection of innovative process control applications, based on radiation sources, as illustrations of the present state of the art and also describes recent progress in inspection methods including progress in the development of on-line facilities. For all applications involving radiation sources, careful selection of parameters is required to achieve the highest efficiency compatible with an integrity suitable for the intended application. The paper concludes with a brief discussion of the common principles on which the fabrication of sources is based in order to satisfy national and international safety legislation. (author)

The progress in the researches for uranium mill tailings cleaning treatment and no-waste uranium ore milling processes

International Nuclear Information System (INIS)

Wang Jintang

1990-01-01

The production of uranium mill tailings and their risk assessment are described. The moethods of uranium mill tailings disposal and management are criticized and the necessity of the researches for uranium mill tailings cleaning treatment and no-wasle uranium ore milling process are demonstrated. The progress for these researches in China and other countries with uranium production is reviewed, and the corresponding conclusions are reported

Progression og underviserkompetencer

Directory of Open Access Journals (Sweden)

Lene Tortzen Bager

2014-03-01

entrepreneurship. The study uses categories such as didactics, working processes in academic courses or courses at university as key themes. Participating teachers’ descriptions of their concepts of entrepreneurship in their teaching practices are used to chart their progress. This material provides an insight into the teachers’ reflections on their development processes, challenges and different modes of teacher authority related to entrepreneurship teaching in universities. Together, the gathered data contribute to discussions on student teacher development by identifying the importance of the teachers’ motivation as a precondition for professional and educational development.

AECL's progress in developing the DUPIC fuel fabrication process

International Nuclear Information System (INIS)

Sullivan, J.D.; Cox, D.S.

1995-01-01

Spent Pressurized Water Reactor (PWR) fuel can be used directly in CANDU reactors without the need for wet chemical reprocessing or reenrichment. Considerable experimental progress has been made in verifying the practicality of this fuel cycle, including hot-cell experiments using spent PWR fuels and out-cell trials using surrogate fuels. This paper describes the current status of these experiments. (author)

How to Develop Meta-Cognitionto Thinking Process in Order to Improve Investigation Skill

Directory of Open Access Journals (Sweden)

Esther Zaretsky

2006-02-01

Full Text Available In this paper a special way to use intelligence tests in order to strengthen the student teachers' meta-cognition and their ability to master the skills was examined. The objective of this exercise is to prepare the students to use these skills, which are relevant also for carrying out scientific experiments. These student teachers reported that the process of carrying out the experiments became more transparent after their experimenting with the matrices.

Studies of nuclear processes. Progress report, 1 June 1976--31 December 1976

International Nuclear Information System (INIS)

1976-01-01

This report covers work performed under the terms of this contract since the last progress report (ORO-2408-109). Since most of the activities to be reported are adequately reflected in the documents submitted, in the TUNL progress report and the Duke University report for the current contract period, the present document is a summary. Included are both experimental and theoretical nuclear physics. A list of publications is also included

Fourth meeting entitled “Visualization and Processing of Tensors and Higher Order Descriptors for Multi-Valued Data”

CERN Document Server

Vilanova, Anna; Burgeth, Bernhard; Visualization and Processing of Tensors and Higher Order Descriptors for Multi-Valued Data

2014-01-01

Arising from the fourth Dagstuhl conference entitled Visualization and Processing of Tensors and Higher Order Descriptors for Multi-Valued Data (2011), this book offers a broad and vivid view of current work in this emerging field. Topics covered range from applications of the analysis of tensor fields to research on their mathematical and analytical properties. Part I, Tensor Data Visualization, surveys techniques for visualization of tensors and tensor fields in engineering, discusses the current state of the art and challenges, and examines tensor invariants and glyph design, including an overview of common glyphs. The second Part, Representation and Processing of Higher-order Descriptors, describes a matrix representation of local phase, outlines mathematical morphological operations techniques, extended for use in vector images, and generalizes erosion to the space of diffusion weighted MRI. Part III, Higher Order Tensors and Riemannian-Finsler Geometry, offers powerful mathematical language to model and...

NNLO corrections for LHC processes

CERN Document Server

Caola, Fabrizio

2015-01-01

To fully profit from the remarkable achievements of the experimental program at the LHC, very precise theoretical predictions for signal and background processes are required. In this contribution, I will review some of the recent progress in fully exclusive next-to-next-toleading-order (NNLO) QCD computations. As an example of the phenomenological relevance of these results, I will present LHC predictions for t-channel single-top production and Higgs boson production in association with one hard jet.

Involution of categorical thinking processes in Alzheimer's disease: Preliminary results

Directory of Open Access Journals (Sweden)

Claudia Berlim de Mello

Full Text Available Abstract Alzheimer's disease (AD is a degenerative brain disorder characterized by progressive losses in cognitive functions, including memory. The sequence of these losses may correspond to the inverse order of the normal sequence of ontogenetic cognitive acquisitions, a process named retrogenesis. One of the acquisitions that improve in normal development is the ability to retrieve previously acquired categorical knowledge from semantic memory in order to guide associative thinking and memory processes; consequently, children become able to associate verbal stimuli in more complex taxonomic ways and to use this knowledge to improve their recall. Objective: In this study, we investigated if AD-related deterioration of semantic memory involves a decrease in categorical thinking processes with progression of the disease, according to the retrogenesis hypothesis. Methods: We compared the performance of AD patients at mild and moderate stages, and of groups of 7, 10 and 14-year-old children in tasks of free association along with recall tasks of perceptually and semantically related stimuli. Results: ANOVAS showed a decrease in taxonomic associations and an increase in diffuse associations between mild and moderate stages, corresponding to the inverse order shown by the child groups. At the moderate AD stage, the pattern was similar to that of 7-year-old children. Both groups of patients performed worse than child groups in recall tasks. Conclusions: These results corroborate the hypothesis of an involution of the processes of categorical associative thinking in the course of the disease.

Demonstrating the effects of phonological similarity and frequency on item and order memory in Down syndrome using process dissociation.

Science.gov (United States)

Smith, Elizabeth; Jarrold, Christopher

2014-12-01

It is important to distinguish between memory for item information and memory for order information when considering the nature of verbal short-term memory (vSTM) performance. Although other researchers have attempted to make this distinction between item and order memory in children, none has done so using process dissociation. This study shows that such an approach can be particularly useful and informative. Individuals with Down syndrome (DS) tend to experience a vSTM deficit. These two experiments explored whether phonological similarity (Experiment 1) and item frequency (Experiment 2) affected vSTM for item and order information in a group of individuals with DS compared with typically developing (TD) vocabulary-matched children. Process dissociation was used to obtain measures of item and order memory via Nairne and Kelley's procedure (Journal of Memory and Language, 50 (2004) 113-133). Those with DS were poorer than the matched TD group for recall of both item and order information. However, in both populations, phonologically similar items reduced order memory but enhanced item memory, whereas high-frequency items resulted in improvements in both item and order memory-effects that are in line with previous research in the adult literature. These results indicate that, despite poorer vSTM performance in DS, individuals experience phonological coding of verbal input and a contribution of long-term memory knowledge to recall. These findings inform routes for interventions for those with DS, highlighting the need to enhance both item and order memory. Moreover, this work demonstrates that process dissociation is applicable and informative for studying special populations and children. Copyright © 2014 Elsevier Inc. All rights reserved.

The Role of Hybrid Make-to-Stock (MTS) - Make-to-Order (MTO) and Economic Order Quantity (EOQ) Inventory Control Models in Food and Beverage Processing Industry

Science.gov (United States)

Najhan Mohd Nagib, Ahmad; Naufal Adnan, Ahmad; Ismail, Azianti; Halim, Nurul Hayati Abdul; Syuhadah Khusaini, Nurul

2016-11-01

The inventory model had been utilized since the early 1900s. The implementation of the inventory management model is generally to ensure that an organisation is able to fulfil customer's demand at the lowest possible cost to improve profitability. This paper focuses on reviewing previous published papers regarding inventory control model mainly in the food and beverage processing industry. The author discusses four inventory models, which are the make-to-stock (MTS), make-to-order (MTO), economic order quantity (EOQ), and hybrid of MTS-MTO models. The issues raised by the researchers on the above techniques as well as the elements need to be considered upon selection have been discussed in this paper. The main objective of the study is to highlight the important role played by these inventory control models in the food and beverage processing industry.

Application of accident progression event tree technology to the Savannah River Site Defense Waste Processing Facility SAR analysis

International Nuclear Information System (INIS)

Brandyberry, M.D.; Baker, W.H.; Wittman, R.S.; Amos, C.N.

1993-01-01

The Accident Analysis in the Safety Analysis Report (SAR) for the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) has recently undergone an upgrade. Non-reactor SARs at SRS (and other Department of Energy (DOE) sites) use probabilistic techniques to assess the frequency of accidents at their facilities. This paper describes the application of an extension of the Accident Progression Event Tree (APET) approach to accidents at the SRS DWPF. The APET technique allows an integrated model of the facility risk to be developed, where previous probabilistic accident analyses have been limited to the quantification of the frequency and consequences of individual accident scenarios treated independently. Use of an APET allows a more structured approach, incorporating both the treatment of initiators that are common to more than one accident, and of accident progression at the facility

Progressive nature of heart failure and systems biology

Directory of Open Access Journals (Sweden)

George E. Louridas

2015-01-01

Full Text Available The progressive nature of heart failure (HF is the predominant cause for the clinical course that the HF syndrome is taking. Systems biology methodology is of the utmost importance to explain and comprehend the built-in mechanisms of adverse clinical progression. Various heart diseases produce myocardial damage with subsequent left ventricular remodeling which is the principal underlying pathophysiological mechanism for the clinical progression of HF. The self-organized positive feedback stabilization mechanisms of left ventricular remodeling, adrenergic stimulation and activation of the renin-angiotensin-aldosterone system and natriuretic peptide systems, are hierarchical adaptive processes. These adaptive processes are responsible for further left ventricular remodeling with subsequent clinical deterioration and for the emergence of clinical phenotypes. These mechanisms are counteracted with angiotensin-converting enzyme inhibitors, angiotensin receptor blockers and β-blockers in an attempt to improve the adverse clinical phenomena of HF progression in a new but clinically worse stabilization level. In this review our intention is to underline the progressive nature of the HF syndrome and to demonstrate the significance of ventricular remodeling and the role of self-organized positive feedback adaptive processes.

Progressive posterior cortical dysfunction

Directory of Open Access Journals (Sweden)

Fábio Henrique de Gobbi Porto

Full Text Available Abstract Progressive posterior cortical dysfunction (PPCD is an insidious syndrome characterized by prominent disorders of higher visual processing. It affects both dorsal (occipito-parietal and ventral (occipito-temporal pathways, disturbing visuospatial processing and visual recognition, respectively. We report a case of a 67-year-old woman presenting with progressive impairment of visual functions. Neurologic examination showed agraphia, alexia, hemispatial neglect (left side visual extinction, complete Balint's syndrome and visual agnosia. Magnetic resonance imaging showed circumscribed atrophy involving the bilateral parieto-occipital regions, slightly more predominant to the right . Our aim was to describe a case of this syndrome, to present a video showing the main abnormalities, and to discuss this unusual presentation of dementia. We believe this article can contribute by improving the recognition of PPCD.

Progressive posterior cortical dysfunction

Science.gov (United States)

Porto, Fábio Henrique de Gobbi; Machado, Gislaine Cristina Lopes; Morillo, Lilian Schafirovits; Brucki, Sonia Maria Dozzi

2010-01-01

Progressive posterior cortical dysfunction (PPCD) is an insidious syndrome characterized by prominent disorders of higher visual processing. It affects both dorsal (occipito-parietal) and ventral (occipito-temporal) pathways, disturbing visuospatial processing and visual recognition, respectively. We report a case of a 67-year-old woman presenting with progressive impairment of visual functions. Neurologic examination showed agraphia, alexia, hemispatial neglect (left side visual extinction), complete Balint’s syndrome and visual agnosia. Magnetic resonance imaging showed circumscribed atrophy involving the bilateral parieto-occipital regions, slightly more predominant to the right. Our aim was to describe a case of this syndrome, to present a video showing the main abnormalities, and to discuss this unusual presentation of dementia. We believe this article can contribute by improving the recognition of PPCD. PMID:29213665

Second order analysis for spatial Hawkes processes

DEFF Research Database (Denmark)

Møller, Jesper; Torrisi, Giovanni Luca

We derive summary statistics for stationary Hawkes processes which can be considered as spatial versions of classical Hawkes processes. Particularly, we derive the intensity, the pair correlation function and the Bartlett spectrum. Our results for Gaussian fertility rates and the extension...... to marked Hawkes processes are discussed....

Tumor heterogeneity and progression: conceptual foundations for modeling.

Science.gov (United States)

Greller, L D; Tobin, F L; Poste, G

1996-01-01

A conceptual foundation for modeling tumor progression, growth, and heterogeneity is presented. The purpose of such models is to aid understanding, test ideas, formulate experiments, and to model cancer 'in machina' to address the dynamic features of tumor cell heterogeneity, progression, and growth. The descriptive capabilities of such an approach provides a consistent language for qualitatively reasoning about tumor behavior. This approach provides a schema for building conceptual models that combine three key phenomenological driving elements: growth, progression, and genetic instability. The growth element encompasses processes contributing to changes in tumor bulk and is distinct from progression per se. The progression element subsumes a broad collection of processes underlying phenotypic progression. The genetics elements represents heritable changes which potentially affect tumor character and behavior. Models, conceptual and mathematical, can be built for different tumor situations by drawing upon the interaction of these three distinct driving elements. These models can be used as tools to explore a diversity of hypotheses concerning dynamic changes in cellular populations during tumor progression, including the generation of intratumor heterogeneity. Such models can also serve to guide experimentation and to gain insight into dynamic aspects of complex tumor behavior.

Probing temporal aspects of high-order harmonic pulses via multi-colour, multi-photon ionization processes

Energy Technology Data Exchange (ETDEWEB)

Mauritsson, J [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Johnsson, P [Department of Physics, Lund Institute of Technology, PO Box 118, SE-22100 Lund (Sweden); Lopez-Martens, R [Department of Physics, Lund Institute of Technology, PO Box 118, SE-22100 Lund (Sweden); Varju, K [Department of Physics, Lund Institute of Technology, PO Box 118, SE-22100 Lund (Sweden); L' Huillier, A [Department of Physics, Lund Institute of Technology, PO Box 118, SE-22100 Lund (Sweden); Gaarde, M B [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Schafer, K J [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States)

2005-07-14

High-order harmonics generated through the interaction of atoms and strong laser fields are a versatile, laboratory-scale source of extreme ultraviolet (XUV) radiation on a femtosecond or even attosecond time-scale. In order to be a useful experimental tool, however, this radiation has to be well characterized, both temporally and spectrally. In this paper we discuss how multi-photon, multi-colour ionization processes can be used to completely characterize either individual harmonics or attosecond pulse trains. In particular, we discuss the influence of the intensity and duration of the probe laser, and how these parameters effect the accuracy of the XUV characterization.

Probing temporal aspects of high-order harmonic pulses via multi-colour, multi-photon ionization processes

International Nuclear Information System (INIS)

Mauritsson, J; Johnsson, P; Lopez-Martens, R; Varju, K; L'Huillier, A; Gaarde, M B; Schafer, K J

2005-01-01

High-order harmonics generated through the interaction of atoms and strong laser fields are a versatile, laboratory-scale source of extreme ultraviolet (XUV) radiation on a femtosecond or even attosecond time-scale. In order to be a useful experimental tool, however, this radiation has to be well characterized, both temporally and spectrally. In this paper we discuss how multi-photon, multi-colour ionization processes can be used to completely characterize either individual harmonics or attosecond pulse trains. In particular, we discuss the influence of the intensity and duration of the probe laser, and how these parameters effect the accuracy of the XUV characterization

Fundamental studies of separation processes. Technical progress report

International Nuclear Information System (INIS)

Rogers, L.B.

1975-06-01

Studies using high-precision gas chromatography and supercritical fluid chromatography have produced new types of information on liquid crystals and on behavior of substances in the region of the critical temperature, respectively. In addition, the first successful studies of the effects of pressure on cation exchange have been made using aqueous solutions of alkali metal nitrates. In contrast, progress on separations of isotopic species using gas chromatography has been disappointing. In that area, the chief accomplishment has been a determination of the levels of accuracy and precision with which isotopic abundances can be measured using our quadrupole mass spectrometer. (U.S.)

Progress of ITER vacuum vessel

Energy Technology Data Exchange (ETDEWEB)

Ioki, K., E-mail: Kimihiro.Ioki@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Bayon, A. [F4E, c/ Josep Pla, No. 2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Kim, B.C. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Kuzmin, E. [NTC “Sintez”, Efremov Inst., 189631 Metallostroy, St. Petersburg (Russian Federation); Le Barbier, R.; Martinez, J.-M. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Pathak, H. [ITER-India, A-29, GIDC Electronic Estate, Sector 25, Gandhinagar 382025 (India); Preble, J. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Sa, J.W. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Terasawa, A.; Utin, Yu. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); and others

2013-10-15

Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure.

Progress of ITER vacuum vessel

International Nuclear Information System (INIS)

Ioki, K.; Bayon, A.; Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B.; Kim, B.C.; Kuzmin, E.; Le Barbier, R.; Martinez, J.-M.; Pathak, H.; Preble, J.; Sa, J.W.; Terasawa, A.; Utin, Yu.

2013-01-01

Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure

The effect of conditional probability of chord progression on brain response: an MEG study.

Directory of Open Access Journals (Sweden)

Seung-Goo Kim

Full Text Available BACKGROUND: Recent electrophysiological and neuroimaging studies have explored how and where musical syntax in Western music is processed in the human brain. An inappropriate chord progression elicits an event-related potential (ERP component called an early right anterior negativity (ERAN or simply an early anterior negativity (EAN in an early stage of processing the musical syntax. Though the possible underlying mechanism of the EAN is assumed to be probabilistic learning, the effect of the probability of chord progressions on the EAN response has not been previously explored explicitly. METHODOLOGY/PRINCIPAL FINDINGS: In the present study, the empirical conditional probabilities in a Western music corpus were employed as an approximation of the frequencies in previous exposure of participants. Three types of chord progression were presented to musicians and non-musicians in order to examine the correlation between the probability of chord progression and the neuromagnetic response using magnetoencephalography (MEG. Chord progressions were found to elicit early responses in a negatively correlating fashion with the conditional probability. Observed EANm (as a magnetic counterpart of the EAN component responses were consistent with the previously reported EAN responses in terms of latency and location. The effect of conditional probability interacted with the effect of musical training. In addition, the neural response also correlated with the behavioral measures in the non-musicians. CONCLUSIONS/SIGNIFICANCE: Our study is the first to reveal the correlation between the probability of chord progression and the corresponding neuromagnetic response. The current results suggest that the physiological response is a reflection of the probabilistic representations of the musical syntax. Moreover, the results indicate that the probabilistic representation is related to the musical training as well as the sensitivity of an individual.

Predictors of third and Higher order births in India

Directory of Open Access Journals (Sweden)

Payal Singh

2015-12-01

Full Text Available Background: Total fertility rate (TFR reflecting population growth is closely related to higher order parity progression. Many Indian states reached replacement level of TFR, but still states constituting nearly 40% population are with TFR ≥ 3. The predictors are the desire of son’s, poor contraceptives practices, younger age at marriage, child loss and shorter birth spacing. Objective: This analysis assessed the degree of relation of 3rd and higher order parity progression with the above mentioned predictors. Material and Methods: State/Union Territories wise proportions of women: progressing to ≥3 births, more sons desire, birth spacing <24 months, adopting modern contraception and median marriage age <18 years along with infant mortality rate (IMR were taken from NFHS-III report. Correlation matrix and stepwise forward multiple regression carried. Significance was seen at 5%. Results: Hindi speaking states constituting 38.92% nation population recorded TFR ≥3. Positive correlation of mothers progressing ≥ 3 births was highest (0.746 with those desiring more sons followed by IMR (0.445; while maximum negative correlation with those practicing modern contraceptives (-0.565 followed by median age at marriage (-0.391. Multiple regression analysis in order identified desire of more sons, practicing modern contraception and shorter birth spacing as the significant predictors and jointly explained 77.9% of the total variation with gain of 15.5% by adding modern contraceptive practice and 8.3% by adding shorter birth spacing. Conclusions: Desire of more sons appeared the most important predictor to progress ≥3 births that is governed by society culture and educational attainment, require attitudinal change. Further, mothers need motivation to practice both spacing and terminal methods once family is complete.

Opportunities for Collaborative Adaptive Management Progress: Integrating Stakeholder Assessments into Progress Measurement

Directory of Open Access Journals (Sweden)

Jim Berkley

2013-12-01

There are differences among stakeholders in the indicators they consider as relevant to the assessment of progress. Elucidating these differences can provide useful information about system components and relationships that are important to public support of a CAM program and progress. One of the sources of differences in progress assessments among stakeholders comes from their diverse perceptions about the desired and current states of the social-ecological systems. Stakeholder behavior can be inconsistent between group and individual settings. Individually they may make plans, based on their assessments, that do not conform to the group plan because of their unique interests and preferences. The results of this study need to be further tested. The framework should be used through multiple cycles to determine whether the information gathered with this approach results in additional progress as compared with past approaches. In particular, it would be helpful to test whether gathering such information resulted in a decrease in stakeholders electing to go outside of the CAM process to get their needs met.

Recent progress on fabrication of memristor and transistor-based neuromorphic devices for high signal processing speed with low power consumption

Science.gov (United States)

Hadiyawarman; Budiman, Faisal; Goldianto Octensi Hernowo, Detiza; Pandey, Reetu Raj; Tanaka, Hirofumi

2018-03-01

The advanced progress of electronic-based devices for artificial neural networks and recent trends in neuromorphic engineering are discussed in this review. Recent studies indicate that the memristor and transistor are two types of devices that can be implemented as neuromorphic devices. The electrical switching characteristics and physical mechanism of neuromorphic devices based on metal oxide, metal sulfide, silicon, and carbon materials are broadly covered in this review. Moreover, the switching performance comparison of several materials mentioned above are well highlighted, which would be useful for the further development of memristive devices. Recent progress in synaptic devices and the application of a switching device in the learning process is also discussed in this paper.

High-order Composite Likelihood Inference for Max-Stable Distributions and Processes

KAUST Repository

Castruccio, Stefano; Huser, Raphaë l; Genton, Marc G.

2015-01-01

In multivariate or spatial extremes, inference for max-stable processes observed at a large collection of locations is a very challenging problem in computational statistics, and current approaches typically rely on less expensive composite likelihoods constructed from small subsets of data. In this work, we explore the limits of modern state-of-the-art computational facilities to perform full likelihood inference and to efficiently evaluate high-order composite likelihoods. With extensive simulations, we assess the loss of information of composite likelihood estimators with respect to a full likelihood approach for some widely-used multivariate or spatial extreme models, we discuss how to choose composite likelihood truncation to improve the efficiency, and we also provide recommendations for practitioners. This article has supplementary material online.

High-order Composite Likelihood Inference for Max-Stable Distributions and Processes

KAUST Repository

Castruccio, Stefano

2015-09-29

In multivariate or spatial extremes, inference for max-stable processes observed at a large collection of locations is a very challenging problem in computational statistics, and current approaches typically rely on less expensive composite likelihoods constructed from small subsets of data. In this work, we explore the limits of modern state-of-the-art computational facilities to perform full likelihood inference and to efficiently evaluate high-order composite likelihoods. With extensive simulations, we assess the loss of information of composite likelihood estimators with respect to a full likelihood approach for some widely-used multivariate or spatial extreme models, we discuss how to choose composite likelihood truncation to improve the efficiency, and we also provide recommendations for practitioners. This article has supplementary material online.

SOCIAL ORDERS AND POLITICAL ANALYSIS OF REGIONAL PROCESSES

Directory of Open Access Journals (Sweden)

A. D. Voskressenski

2012-01-01

Full Text Available Abstract: Contemporary Political Science deals mainly with three major research fields (typology of social order within countries, existing and emerging regional identity and world order in international system, which are studied separately. This division is a product of the traditional, West-centric theories. The current article building upon achievements of the Russian school of Asian studies and new reality of the West and East proposes framework for complex approach towards political reality with due account of interdependence between global, regional and national levels.

The role of technical progress in the process of recalculating oil reserves; Le role du progres technique dans le processus de renouvellement des reserves petrolieres

Energy Technology Data Exchange (ETDEWEB)

Boulard, J.N. [Total/Fina/Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France)

1999-08-01

Contrary to the concept of resources (which is essentially a geological one), the notion of reserves designates the quantities that are technically and economically recoverable. Beyond the production-related effect, the reserves therefore evolve over time in accordance with numerous technical and economic parameters. Among these parameters, it can be seen that technical progress plays a considerable role throughout the process of converting resources into reserves, including progress in the identification, accessibility and processing of the resources, and improvements in economic viability. After having tackled the problem of measuring the 'technical progress effects' and citing examples, we demonstrate that the evolution in oil reserves is subject to three types of impact. These are a quantitative impact by significantly improving the recovery rates or making it possible to identify hitherto undetectable oil fields, a qualitative impact by widening the resource base thanks to the adoption of new categories of oil (in particular the so-called 'unconventional' oils) and by carrying out the gradual substitution between these resources of differing qualities. There is also a dynamic impact, through the acceleration of resource availability. Through these three approaches, technical progress makes makes it possible to ensure continuity in oil supply and contributes significantly to the recalculation of reserves. It therefore acts as a compensating factor, counterbalancing the progressive depletion of resources. (author)

Formalizing WS-BPEL and Higher Order Mobile Embedded Business Processes in the Bigraphical Programming Languages (BPL) Tool

DEFF Research Database (Denmark)

Bundgaard, Mikkel; Glenstrup, Arne John; Hildebrandt, Thomas

is the starting point of an endeavor to provide a completely formalized and extensible business process engine within the Computer Supported Mobile Adaptive Business Processes (CosmoBiz) research project at the IT University of Copenhagen. Building upon the formalization of WS-BPEL we propose and formalize Home......BPEL, a higher-order WS-BPEL-like business process execution language where processes are first-class values that can be stored in variables, passed as messages, and activated as embedded sub-instances. A sub-instance is similar to a WS-BPEL scope, except that it can be dynamically frozen and stored as a process...

A theoretical model to describe progressions and regressions for exercise rehabilitation.

Science.gov (United States)

Blanchard, Sam; Glasgow, Phil

2014-08-01

This article aims to describe a new theoretical model to simplify and aid visualisation of the clinical reasoning process involved in progressing a single exercise. Exercise prescription is a core skill for physiotherapists but is an area that is lacking in theoretical models to assist clinicians when designing exercise programs to aid rehabilitation from injury. Historical models of periodization and motor learning theories lack any visual aids to assist clinicians. The concept of the proposed model is that new stimuli can be added or exchanged with other stimuli, either intrinsic or extrinsic to the participant, in order to gradually progress an exercise whilst remaining safe and effective. The proposed model maintains the core skills of physiotherapists by assisting clinical reasoning skills, exercise prescription and goal setting. It is not limited to any one pathology or rehabilitation setting and can adapted by any level of skilled clinician. Copyright © 2014 Elsevier Ltd. All rights reserved.

First- and second-order contrast sensitivity functions reveal disrupted visual processing following mild traumatic brain injury.

Science.gov (United States)

Spiegel, Daniel P; Reynaud, Alexandre; Ruiz, Tatiana; Laguë-Beauvais, Maude; Hess, Robert; Farivar, Reza

2016-05-01

Vision is disrupted by traumatic brain injury (TBI), with vision-related complaints being amongst the most common in this population. Based on the neural responses of early visual cortical areas, injury to the visual cortex would be predicted to affect both 1(st) order and 2(nd) order contrast sensitivity functions (CSFs)-the height and/or the cut-off of the CSF are expected to be affected by TBI. Previous studies have reported disruptions only in 2(nd) order contrast sensitivity, but using a narrow range of parameters and divergent methodologies-no study has characterized the effect of TBI on the full CSF for both 1(st) and 2(nd) order stimuli. Such information is needed to properly understand the effect of TBI on contrast perception, which underlies all visual processing. Using a unified framework based on the quick contrast sensitivity function, we measured full CSFs for static and dynamic 1(st) and 2(nd) order stimuli. Our results provide a unique dataset showing alterations in sensitivity for both 1(st) and 2(nd) order visual stimuli. In particular, we show that TBI patients have increased sensitivity for 1(st) order motion stimuli and decreased sensitivity to orientation-defined and contrast-defined 2(nd) order stimuli. In addition, our data suggest that TBI patients' sensitivity for both 1(st) order stimuli and 2(nd) order contrast-defined stimuli is shifted towards higher spatial frequencies. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Detecting inpatient falls by using natural language processing of electronic medical records

Directory of Open Access Journals (Sweden)

Toyabe Shin-ichi

2012-12-01

Full Text Available Abstract Background Incident reporting is the most common method for detecting adverse events in a hospital. However, under-reporting or non-reporting and delay in submission of reports are problems that prevent early detection of serious adverse events. The aim of this study was to determine whether it is possible to promptly detect serious injuries after inpatient falls by using a natural language processing method and to determine which data source is the most suitable for this purpose. Methods We tried to detect adverse events from narrative text data of electronic medical records by using a natural language processing method. We made syntactic category decision rules to detect inpatient falls from text data in electronic medical records. We compared how often the true fall events were recorded in various sources of data including progress notes, discharge summaries, image order entries and incident reports. We applied the rules to these data sources and compared F-measures to detect falls between these data sources with reference to the results of a manual chart review. The lag time between event occurrence and data submission and the degree of injury were compared. Results We made 170 syntactic rules to detect inpatient falls by using a natural language processing method. Information on true fall events was most frequently recorded in progress notes (100%, incident reports (65.0% and image order entries (12.5%. However, F-measure to detect falls using the rules was poor when using progress notes (0.12 and discharge summaries (0.24 compared with that when using incident reports (1.00 and image order entries (0.91. Since the results suggested that incident reports and image order entries were possible data sources for prompt detection of serious falls, we focused on a comparison of falls found by incident reports and image order entries. Injury caused by falls found by image order entries was significantly more severe than falls detected by

Human Nature and the Social Order | Opafola | Annals of ...

African Journals Online (AJOL)

This paper takes cognizance of the fact that the ideas of human beings or human persons and a social order are mutually re-in forcing or mutually inclusive. It argues that a stable, peaceful, and progressive social order will be promoted to some extent if the differences in the elements of human nature are acknowledged and ...

Order-disorder-reorder process in thermally treated dolomite samples: a combined powder and single-crystal X-ray diffraction study

Science.gov (United States)

Zucchini, A.; Comodi, P.; Katerinopoulou, A.; Balic-Zunic, T.; McCammon, C.; Frondini, F.

2012-04-01

A combined powder and single-crystal X-ray diffraction analysis of dolomite [CaMg(CO3)2] heated to 1,200°C at 3 GPa was made to study the order-disorder-reorder process. The order/disorder transition is inferred to start below 1,100°C, and complete disorder is attained at approximately 1,200°C. Twinned crystals characterized by high internal order were found in samples annealed over 1,100°C, and their fraction was found to increase with temperature. Evidences of twinning domains combined with probable remaining disordered portions of the structure imply that reordering processes occur during the quench. Twin domains are hereby proposed as a witness to thermally induced intra-layer-type cation disordering.

[Various pathways leading to the progression of chronic liver diseases].

Science.gov (United States)

Egresi, Anna; Lengyel, Gabriella; Somogyi, Anikó; Blázovics, Anna; Hagymási, Krisztina

2016-02-21

As the result of various effects (viruses, metabolic diseases, nutritional factors, toxic agents, autoimmune processes) abnormal liver function, liver steatosis and connective tissue remodeling may develop. Progression of this process is complex including various pathways and a number of factors. The authors summarize the factors involved in the progression of chronic liver disease. They describe the role of cells and the produced inflammatory mediators and cytokines, as well as the relationship between the disease and the intestinal flora. They emphasize the role of oxidative stress, mitochondrial dysfunction and cell death in disease progression. Insulin resistance and micro-elements (iron, copper) in relation to liver damage are also discussed, and genetic and epigenetic aspects underlying disease progression are summarized. Discovery of novel treatment options, assessment of the effectiveness of treatment, as well as the success and proper timing of liver transplantation may depend on a better understanding of the process of disease progression.

Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers

Energy Technology Data Exchange (ETDEWEB)

R.E. Mizia; D.E. Clark; M.V. Glazoff; T.E. Lister; T.L. Trowbridge

2011-12-01

The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150 C for 1 hour with an applied pressure of 5 MPa using 15 {micro}m nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved

Solvent refined coal (SRC) process. Quarterly technical progress report, January 1980-March 1980. [In process streams

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

This report summarizes the progress of the Solvent Refined Coal (SRC) project at the SRC Pilot Plant in Fort Lewis, Wahsington, and the Process Development Unit (P-99) in Harmarville, Pennsylvania. After the remaining runs of the slurry preheater survey test program were completed January 14, the Fort Lewis Pilot Plant was shut down to inspect Slurry Preheater B and to insulate the coil for future testing at higher rates of heat flux. Radiographic inspection of the coil showed that the welds at the pressure taps and the immersion thermowells did not meet design specifications. Slurry Preheater A was used during the first 12 days of February while weld repairs and modifications to Slurry Preheater B were completed. Two attempts to complete a material balance run on Powhatan No. 6 Mine coal were attempted but neither was successful. Slurry Preheater B was in service the remainder of the quarter. The start of a series of runs at higher heat flux was delayed because of plugging in both the slurry and the hydrogen flow metering systems. Three baseline runs and three slurry runs of the high heat flux program were completed before the plant was shut down March 12 for repair of the Inert Gas Unit. Attempts to complete a fourth slurry run at high heat flux were unsuccessful because of problems with the coal feed handling and the vortex mix systems. Process Development Unit (P-99) completed three of the four runs designed to study the effect of dissolver L/D ratio. The fourth was under way at the end of the period. SRC yield correlations have been developed that include coal properties as independent variables. A preliminary ranking of coals according to their reactivity in PDU P-99 has been made. Techniques for studying coking phenomenona are now in place.

Multi-objective LQR with optimum weight selection to design FOPID controllers for delayed fractional order processes.

Science.gov (United States)

Das, Saptarshi; Pan, Indranil; Das, Shantanu

2015-09-01

An optimal trade-off design for fractional order (FO)-PID controller is proposed with a Linear Quadratic Regulator (LQR) based technique using two conflicting time domain objectives. A class of delayed FO systems with single non-integer order element, exhibiting both sluggish and oscillatory open loop responses, have been controlled here. The FO time delay processes are handled within a multi-objective optimization (MOO) formalism of LQR based FOPID design. A comparison is made between two contemporary approaches of stabilizing time-delay systems withinLQR. The MOO control design methodology yields the Pareto optimal trade-off solutions between the tracking performance and total variation (TV) of the control signal. Tuning rules are formed for the optimal LQR-FOPID controller parameters, using median of the non-dominated Pareto solutions to handle delayed FO processes. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Connection between kinetic phenomena and atomic ordering processes and electronic structure of Ni3(FeMe)-type alloys

International Nuclear Information System (INIS)

Vasil'eva, R.P.; Arkhipov, Yu.N.; Narkulov, N.; Fadin, V.P.

1978-01-01

The results are presented of the measurements of the Hall and the Nernst-Ettingshausen effect and of thermal emf, electric resistivity and magnetization measurements in alloys Ni 3 (FeMe), where Me is Mo, Cr, W. The concentration of additions is not higher than 12.5%. The relationship of the kinetic phenomena with peculiarities of the electron structure and ordering processes is investigated. The obtained data show that the Hall and Nernst-Ettingshausen electromotive forces in the investigated alloys have positive values. The effects of the concentration variations of the investigated phenomena manifest themselves stronger in ordered state, this testifyies to a considerable increase of the part, the hole sections of the Fermi surface play. The investigation enables some conclusions to be made on the energy characteristics of these alloys as a function of the variation of the concentration composition of the alloys and the ordering processes

Approximal secondary caries lesion progression, a 20-week in situ study

NARCIS (Netherlands)

Thomas, R. Z.; Ruben, J. L.; ten Bosch, J. J.; Fidler, V.; Huysmans, M. C. D. N. J. M.

2007-01-01

There is no consensus about the definition and progression of outer and wall lesions in secondary caries. In this study we investigated whether lesion progression is influenced by an adjacent composite restoration and whether wall lesions develop at the composite-tooth interface. In order to study

Selective interference of grasp and space representations with number magnitude and serial order processing.

Science.gov (United States)

van Dijck, Jean-Philippe; Fias, Wim; Andres, Michael

2015-10-01

It has been proposed that the metrics of space, time and other magnitudes relevant for action are coupled through a generalized magnitude system that also contribute to number representation. Several studies capitalized on stimulus-response compatibility effects to show that numbers map onto left-right representations and grasp representations as a function of their magnitude. However, the tasks typically used do not allow disentangling magnitude from serial order processing. Here, we devised a working memory (WM) task where participants had to remember random sequences of numbers and perform a precision/whole-hand grip (Experiment 1) or a uni-manual left/right button press (Experiment 2) in response to numbers presented during the retention interval. This task does allow differentiating the interference of number magnitude and serial order with each set of responses. Experiment 1 showed that precision grips were initiated faster than whole-hand grips in response to small numbers, irrespective of their serial position in WM. In contrast, Experiment 2 revealed an advantage of right over left button presses as serial position increased, without any influence of number magnitude. These findings demonstrate that grasping and left-right movements overlap with distinct dimensions of number processing. These findings are discussed in the light of different theories explaining the interactions between numbers, space and action.

Theoretical progress in studying the characteristic x-ray emission from heavy few-electron ions

International Nuclear Information System (INIS)

Surzhykov, Andrey; Stohlker, Thomas; Fritzsche, Stephan; Kabachnik, Nikolai M

2009-01-01

Recent theoretical progress in the study of the x-ray characteristic emission from highly-charged, few-electron ions is reviewed. These investigations show that the bound-state radiative transitions in high-Z ions provide a unique tool for better understanding the interplay between the structural and dynamical properties of heavy ions. In order to illustrate such an interplay, detailed calculations are presented for the K α1 decay of the helium-like uranium ions U 90+ following radiative electron capture, Coulomb excitation and dielectronic recombination processes.

State‐of‐the‐art and progress in the optimization‐based simultaneous design and control for chemical processes

DEFF Research Database (Denmark)

Yuan, Zhihong; Chen, Bingzhen; Sin, Gürkan

2012-01-01

‐based frameworks that are capable of screening alternative designs, and (2) optimization‐based frameworks that integrate the process design and control system design. The major objective is to give an up‐to‐date review of the state‐of‐the‐art and progress in the challenging area of optimization‐based simultaneous...... design and control. First, motivations and significances of simultaneous design and control are illustrated. Second, a general classification of existing methodologies of optimization‐based simultaneous design and control is outlined. Subsequently, the mathematical formulations and relevant theoretical...

Fast Algorithms for High-Order Sparse Linear Prediction with Applications to Speech Processing

DEFF Research Database (Denmark)

Jensen, Tobias Lindstrøm; Giacobello, Daniele; van Waterschoot, Toon

2016-01-01

In speech processing applications, imposing sparsity constraints on high-order linear prediction coefficients and prediction residuals has proven successful in overcoming some of the limitation of conventional linear predictive modeling. However, this modeling scheme, named sparse linear prediction...... problem with lower accuracy than in previous work. In the experimental analysis, we clearly show that a solution with lower accuracy can achieve approximately the same performance as a high accuracy solution both objectively, in terms of prediction gain, as well as with perceptual relevant measures, when...... evaluated in a speech reconstruction application....

Improving the process of progressive preliming in sugar production

OpenAIRE

V. A. Golybin; V. A. Fedoruk; N. A. Voronkova; I. S. Bushmin

2016-01-01

Tasks progressive preliming are to conduct neutralization, coagulation, deposition of non-sugars, the formation of a precipitate structure. This is the first operation of physical and chemical cleaning of the raw juice in the case of it in optimum conditions enables the coagulation and transferred to precipitate a substantial portion of high-molecular non-sugars, poorly soluble calcium salts that provides the cleaning effect of 14–18%, that is, up to half of the total effect on the whole stat...

Recent progresses in application of functionalized graphene sheets

Institute of Scientific and Technical Information of China (English)

无

2010-01-01

Graphene,a rapidly rising star on the horizon of material science,has a unique two-dimensional nanostructure as well as exceptional mechanical and electronic properties.Despite its short history,graphene has exhibited great potential in various applications.In order to implement the potential applications,functionalization of graphene is necessary to obtain uniform dispersions for good processability.Two kinds are dominant for functionalization such as covalent and non-covalent methods.The former is based on the formation of covalent bonds,and the latter the interaction among molecules.In this review,we summarized briefly the recent progress of functionalized graphene sheets (FGs) in different fields,such as optoelectronic materials,sensors,energy storage materials,catalytic,reinforcing components and so on,and also prospected the development trend of FGs in the future.

The digital Dalton Plan: Progressive education as integral part of web-based learning environments

Directory of Open Access Journals (Sweden)

Georg Weichhart

2018-03-01

Full Text Available e-Learning systems increasingly support learning management and self-organized learning processes. Since the latter have been studied in the field of progressive education extensively, it is worthwhile to consider them for developing digital learning environments to support self-regulated learning processes. In this paper we aim at transforming one of the most prominent and sustainable approaches to self-organized learning, the “Dalton Plan” as proposed by Helen Parkhurst. Its assignment structure supports learners when managing their learning tasks, thus triggering self-organized acquisition of knowledge, and its feedback graphs enable transparent learning processes. Since e-learning environments have become common use, rather than creating another system, we propose a modular approach that can be used for extending existing e-learning environments. In order to design a respective component, we interviewed experts in self-organized e-learning. Their input facilitated integrating the Dalton Plan with existing features of e-learning environments. After representing each interview in concept maps, we were able to aggregate them for deriving e-learning requirements conform to the Dalton Plan instruments. In the course of implementing them, particular attention had to be paid to the asynchrony of interaction during runtime. Java Server Faces technology enable the Dalton Plan component to be migrated into existing web 2.0 e-learning platforms. The result was evaluated based on the acquired concept maps, as they also captured the transformation process of the Dalton Plan to e-learning features. The findings encourage embodying further progressive education approaches in this way, since the structured (concept mapping of the Dalton Plan to e-learning features turned out to be accurate. The experts were able to recognize the potential of the approach both in terms of structuring the knowledge acquisition process, and in terms of developing

Label-free SERS in biological and biomedical applications: Recent progress, current challenges and opportunities

Science.gov (United States)

Zheng, Xiao-Shan; Jahn, Izabella Jolan; Weber, Karina; Cialla-May, Dana; Popp, Jürgen

2018-05-01

To achieve an insightful look within biomolecular processes on the cellular level, the development of diseases as well as the reliable detection of metabolites and pathogens, a modern analytical tool is needed that is highly sensitive, molecular-specific and exhibits fast detection. Surface-enhanced Raman spectroscopy (SERS) is known to meet these requirements and, within this review article, the recent progress of label-free SERS in biological and biomedical applications is summarized and discussed. This includes the detection of biomolecules such as metabolites, nucleic acids and proteins. Further, the characterization and identification of microorganisms has been achieved by label-free SERS-based approaches. Eukaryotic cells can be characterized by SERS in order to gain information about the outer cell wall or to detect intracellular molecules and metabolites. The potential of SERS for medically relevant detection schemes is emphasized by the label-free detection of tissue, the investigation of body fluids as well as applications for therapeutic and illicit drug monitoring. The review article is concluded with an evaluation of the recent progress and current challenges in order to highlight the direction of label-free SERS in the future.

Syntactic and Morphosyntactic Processing in Stroke-Induced and Primary Progressive Aphasia

Directory of Open Access Journals (Sweden)

Cynthia K. Thompson

2013-01-01

Full Text Available The paper reports findings derived from three experiments examining syntactic and morphosyntactic processing in individuals with agrammatic and logopenic variants of primary progressive aphasia (PPA-G and PPA-L, respectively and stroke-induced agrammatic and anomic aphasia (StrAg and StrAn, respectively. We examined comprehension and production of canonical and noncanonical sentence structures and production of tensed and nontensed verb forms using constrained tasks in experiments 1 and 2, using the Northwestern Assessment of Verbs and Sentences (NAVS [57] and the Northwestern Assessment of Verb Inflection (NAVI, Thompson and Lee, experimental version test batteries, respectively. Experiment 3 examined free narrative samples, focusing on syntactic and morphosyntactic measures, i.e. production of grammatical sentences, noun to verb ratio, open-class to closed-class word production ratio, and the production of correctly inflected verbs. Results indicate that the two agrammatic groups (i.e., PPA-G and StrAg pattern alike on syntactic and morphosyntactic measures, showing more impaired noncanonical compared to canonical sentence comprehension and production and greater difficulties producing tensed compared to nontensed verb forms. Their spontaneous speech also contained significantly fewer grammatical sentences and correctly inflected verbs, and they produced a greater proportion of nouns compared to verbs, than healthy speakers. In contrast, PPA-L and StrAn individuals did not display these deficits, and performed significantly better than the agrammatic groups on these measures. The findings suggest that agrammatism, whether induced by degenerative disease or stroke, is associated with characteristic deficits in syntactic and morphosyntactic processing. We therefore recommend that linguistically sophisticated tests and narrative analysis procedures be used to systematically evaluate the linguistic ability of individuals with PPA, contributing to

Ordering transitions induced by Coulomb interactions

International Nuclear Information System (INIS)

Rovere, M.; Senatore, G.; Tosi, M.P.

1988-11-01

We briefly review recent progress in treating phase transitions to ordered states driven by Coulomb interactions. Wigner crystallization of the one-component plasma, in the degenerate Fermi limit and in the classical limit, is the foremost example and developments in its theory are discussed in some detail. Attention is also given to quasi-twodimensional realizations of the plasma model in the laboratory. The usefulness of these ideas in relation to freezing and ordering transitions is illustrated with reference to alkali metals, elemental and polar semiconductors, and various types of ionic systems (molten salts, colloidal suspensions and astrophysical plasmas). (author). 70 refs, 5 figs

First-order inflation

International Nuclear Information System (INIS)

Kolb, E.W.

1991-01-01

In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been reviewed. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result if inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. (orig.)

Mixed-order phase transition of the contact process near multiple junctions.

Science.gov (United States)

Juhász, Róbert; Iglói, Ferenc

2017-02-01

We have studied the phase transition of the contact process near a multiple junction of M semi-infinite chains by Monte Carlo simulations. As opposed to the continuous transitions of the translationally invariant (M=2) and semi-infinite (M=1) system, the local order parameter is found to be discontinuous for M>2. Furthermore, the temporal correlation length diverges algebraically as the critical point is approached, but with different exponents on the two sides of the transition. In the active phase, the estimate is compatible with the bulk value, while in the inactive phase it exceeds the bulk value and increases with M. The unusual local critical behavior is explained by a scaling theory with an irrelevant variable, which becomes dangerous in the inactive phase. Quenched spatial disorder is found to make the transition continuous in agreement with earlier renormalization group results.

Quantum mechanical studies of heavy ion scattering processes. Progress report, July 15, 1983-March, 1984

International Nuclear Information System (INIS)

Heil, T.G.

1984-01-01

The research done under this contract should provide valuable contributions to our understanding of atomic collision processes. The essence of this project is the description of low energy atomic collision process using molecular states formed by the collision partners in the interaction region. Over the eight months that this contract has been in effect, significant progress has been made on both fundamental and applied levels. On the most basic level, we have recently developed a new diabatic representation of the scattering which has none of the defects associated with the most commonly used formulation of Smith. This may prove to be of great importance since a proper diabatic description is thought to be a more reasonable representation of the actual physical scattering process than the adiabatic description. It should be noted that there is a great deal of controversy surrounding the word proper but our new formulation satisfies most, if not all, criteria for diabatic states. In addition, we have carried out or initiated theoretical studies on a number of atomic scattering processes involving charge transfer reactions and proton-induced fine-structure transitions. Our calculations of differential scattering cross sections for low energy charge transfer reaction should be of particular importance. A number of experimental groups are now proposing to measure these cross sections which our calculations predict should have large, striking features. Such comparisons would provide valuable tests of the theory of low energy atomic collision processes on a more fundamental level than previous comparisons of the total cross sections

Missing in Action: Writing Process-Based Instructional Practices and Measures of Higher-Order Literacy Achievement in Predominantly Urban Elementary Schools

Science.gov (United States)

Briddell, Andrew

2013-01-01

This study of 1,974 fifth grade students investigated potential relationships between writing process-based instruction practices and higher-order thinking measured by a standardized literacy assessment. Writing process is defined as a highly complex, socio-cognitive process that includes: planning, text production, review, metacognition, writing…

A feasibility study of low-order harmonics expansion applied to loading pattern search

Energy Technology Data Exchange (ETDEWEB)

Shaohong, Z.; Dong, L.; Tao, W. [Shanghai Jiao Tong Univ., 1954 Hua Shan Road, Shanghai, 200030 (China); Chao, Y. A. [Westinghouse Electric Company, P. O. Box 355, Pittsburgh, PA 15230-0355 (United States)

2006-07-01

Despite significant progress in core loading pattern search methods over years, there still remains the issue of large computing workload and the need for improving the speed of evaluating loading pattern candidates during the search process. This paper focuses on improving the computing speed for loading pattern evaluation, rather than the method of searching for the patterns. A low order harmonics expansion method for flux distribution representation is proposed for fast LP evaluation application. The novel feature of the method is the separation of the short range local perturbation effect from the long range global tilt effect. The latter effect can be captured by low order harmonics expansion. Demonstration examples are presented to show that even for extremely large perturbations induced by fuel shuffling the proposed method can accurately calculate the flux distribution for the LP with very minimal computation. (authors)

A survey on the progress with implementation of the radiography profession's career progression framework in UK radiotherapy centres

International Nuclear Information System (INIS)

James, Sarah; Beardmore, Charlotte; Dumbleton, Claire

2012-01-01

Aim: The purpose of the survey was to benchmark the progress with implementing the radiography profession's career progression framework within radiotherapy centres across the United Kingdom (UK). Methods: A survey questionnaire was constructed using the Survey Monkey™ tool to assess implementation of the career progression framework of the Society and College of Radiographers. Once constructed, an on line link to the survey questionnaire was emailed to all radiotherapy centre managers in the UK (N = 67) who were invited to provide one response per centre. The survey comprised twenty nine questions which were grouped into nine sections. Key results: The workforce profile indicates that increases in assistant, advanced and consultant level practitioners are required to meet National Radiotherapy Advisory Group recommendations with only a small number of centres having fully implemented the career progression framework. The overall vacancy level across the therapeutic radiography workforce was 4.6% at the time of the survey. Conclusions: and Recommendations: The survey has highlighted some progress with implementation of the career progression framework across the UK since its launch in 2000. However the current level of implementation demonstrated is disappointing considering it is a key recommendation within the NRAG Report 2007 with respect to England. It is recommended that all centres undertake a multi-professional workforce review to embed the career progression framework within their service in order to meet the workforce challenge associated with the required anticipated large growth in radiotherapy capacity.

First-order inflation

International Nuclear Information System (INIS)

Kolb, E.W.; Chicago Univ., IL

1990-09-01

In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result in inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. 58 refs., 3 figs

ADAPTATION AND PROGRESS THROUGH CHANGE MANAGEMENT

Directory of Open Access Journals (Sweden)

Gabriela MEHEDINTU

2016-12-01

Full Text Available The technological progress, digitization and the explosion of information significantly change how individuals, the business environment, and society act, develop and add value. New, interdisciplinary approaches, constantly adapted and sustainable both at the micro and the macro levels are required. Within a company, change management is a systematic element of the strategic business process and involves the early identification of the opportunity of the employees’ development, courage, commitment and flexibility; under no circumstances should it be seen as a risk and instability factor, as it may be considered in the early stages. The example presented in this article proves that the openness to change and continuous improvement develops advantages, optimizes processes and sustains long-term progress.

Progression of chronic renal failure.

Science.gov (United States)

Hakim, R M; Lazarus, J M

1989-11-01

Rates of progression of renal failure were calculated for a group of 277 patients who had five or more clinic visits. The goals of therapy in the absence of ongoing immunological processes were control of blood pressure to diastolic pressures less than 85 mm Hg and serum phosphate less than 1.60 mmol/L (5 mg/dL). The mean rate of progression expressed as the slope of the reciprocal creatinine versus time was -0.0054 +/- 0.0009 dL/mg/mo (mean +/- SEM), and the median was -0.00315 dL/mg/mo. Approximately 25% of these patients had rates of progression less than -0.001 dL/mg/mo. The rate of progression was inversely correlated with the creatinine concentration at entry (P less than 0.004) and with the frequency of clinic visits (P less than 0.01). The "renal survival" time from a creatinine of 880 mumol/L (10 mg/dL) to dialysis was 10.0 +/- 1.2 months (mean +/- SEM). These data provide rates of progression for a group of patients without specific dietary intervention but with vigorous control of blood pressure and phosphorus.

The second order extended Kalman filter and Markov nonlinear filter for data processing in interferometric systems

International Nuclear Information System (INIS)

Ermolaev, P; Volynsky, M

2014-01-01

Recurrent stochastic data processing algorithms using representation of interferometric signal as output of a dynamic system, which state is described by vector of parameters, in some cases are more effective, compared with conventional algorithms. Interferometric signals depend on phase nonlinearly. Consequently it is expedient to apply algorithms of nonlinear stochastic filtering, such as Kalman type filters. An application of the second order extended Kalman filter and Markov nonlinear filter that allows to minimize estimation error is described. Experimental results of signals processing are illustrated. Comparison of the algorithms is presented and discussed.

On the equivalence between progressive taxation and inequality reduction

OpenAIRE

JU, Biung-Ghi; MORENO-TERNERO, Juan D.

2007-01-01

We establish the precise connections between progressive taxation and inequality reduction, in a setting where the level of tax revenue to be raised is endogenously fixed and tax schemes are balanced. We show that, in contrast with the traditional literature on taxation, the equivalence between inequality reduction and the combination of progressivity and income order preservation does not always hold in this setting. However, we show that, among rules satisfying consistency and, either reven...

The Quest for Item Types Based on Information Processing: An Analysis of Raven's Advanced Progressive Matrices, with a Consideration of Gender Differences

Science.gov (United States)

Vigneau, Francois; Bors, Douglas A.

2008-01-01

Various taxonomies of Raven's Advanced Progressive Matrices (APM) items have been proposed in the literature to account for performance on the test. In the present article, three such taxonomies based on information processing, namely Carpenter, Just and Shell's [Carpenter, P.A., Just, M.A., & Shell, P., (1990). What one intelligence test…

ClonEvol: clonal ordering and visualization in cancer sequencing.

Science.gov (United States)

Dang, H X; White, B S; Foltz, S M; Miller, C A; Luo, J; Fields, R C; Maher, C A

2017-12-01

Reconstruction of clonal evolution is critical for understanding tumor progression and implementing personalized therapies. This is often done by clustering somatic variants based on their cellular prevalence estimated via bulk tumor sequencing of multiple samples. The clusters, consisting of the clonal marker variants, are then ordered based on their estimated cellular prevalence to reconstruct clonal evolution trees, a process referred to as 'clonal ordering'. However, cellular prevalence estimate is confounded by statistical variability and errors in sequencing/data analysis, and therefore inhibits accurate reconstruction of the clonal evolution. This problem is further complicated by intra- and inter-tumor heterogeneity. Furthermore, the field lacks a comprehensive visualization tool to facilitate the interpretation of complex clonal relationships. To address these challenges we developed ClonEvol, a unified software tool for clonal ordering, visualization, and interpretation. ClonEvol uses a bootstrap resampling technique to estimate the cellular fraction of the clones and probabilistically models the clonal ordering constraints to account for statistical variability. The bootstrapping allows identification of the sample founding- and sub-clones, thus enabling interpretation of clonal seeding. ClonEvol automates the generation of multiple widely used visualizations for reconstructing and interpreting clonal evolution. ClonEvol outperformed three of the state of the art tools (LICHeE, Canopy and PhyloWGS) for clonal evolution inference, showing more robust error tolerance and producing more accurate trees in a simulation. Building upon multiple recent publications that utilized ClonEvol to study metastasis and drug resistance in solid cancers, here we show that ClonEvol rediscovered relapsed subclones in two published acute myeloid leukemia patients. Furthermore, we demonstrated that through noninvasive monitoring ClonEvol recapitulated the emerging subclones

MIMO processing based on higher-order Poincaré spheres

Science.gov (United States)

Fernandes, Gil M.; Muga, Nelson J.; Pinto, Armando N.

2017-08-01

A multi-input multi-output (MIMO) algorithm based on higher-order Poincaré spheres is demonstrated for space-division multiplexing (SDM) systems. The MIMO algorithm is modulation format agnostic, robust to frequency offset and does not require training sequences. In this approach, the space-multiplexed signal is decomposed in sets of two tributary signals, with each set represented in a higher-order Poincaré sphere. For any arbitrary complex modulation format, the samples of two tributaries can be represented in a given higher-order Poincaré sphere with a symmetry plane. The crosstalk along propagation changes the spatial orientation of this plane and, therefore, it can be compensated by computing and realigning the best fit plane. We show how the transmitted signal can be successfully recovered using this procedure for all possible combinations of tributaries. Moreover, we analyze the convergence speed for the MIMO technique considering several optical-to-noise ratios.

Frontal lobe damage impairs process and content in semantic memory: evidence from category-specific effects in progressive non-fluent aphasia.

Science.gov (United States)

Reilly, Jamie; Rodriguez, Amy D; Peelle, Jonathan E; Grossman, Murray

2011-06-01

Portions of left inferior frontal cortex have been linked to semantic memory both in terms of the content of conceptual representation (e.g., motor aspects in an embodied semantics framework) and the cognitive processes used to access these representations (e.g., response selection). Progressive non-fluent aphasia (PNFA) is a neurodegenerative condition characterized by progressive atrophy of left inferior frontal cortex. PNFA can, therefore, provide a lesion model for examining the impact of frontal lobe damage on semantic processing and content. In the current study we examined picture naming in a cohort of PNFA patients across a variety of semantic categories. An embodied approach to semantic memory holds that sensorimotor features such as self-initiated action may assume differential importance for the representation of manufactured artifacts (e.g., naming hand tools). Embodiment theories might therefore predict that patients with frontal damage would be differentially impaired on manufactured artifacts relative to natural kinds, and this prediction was borne out. We also examined patterns of naming errors across a wide range of semantic categories and found that naming error distributions were heterogeneous. Although PNFA patients performed worse overall on naming manufactured artifacts, there was no reliable relationship between anomia and manipulability across semantic categories. These results add to a growing body of research arguing against a purely sensorimotor account of semantic memory, suggesting instead a more nuanced balance of process and content in how the brain represents conceptual knowledge. Copyright © 2010 Elsevier Srl. All rights reserved.

Infrastructures of progress and dispossession

DEFF Research Database (Denmark)

Andersen, Astrid Oberborbeck

2016-01-01

and organizational infrastructural arrangements, it is argued, can open up for understanding how local and beyond-local processes tangle in complex ways and are productive of new subjectivities; how relations are reconfi gured in neoliberal landscapes of progress and dispossession. Such an approach makes evident how...... to reposition small and medium-scale farmers as backward. Th is article analyzes how farmers struggle to fi nd their place within a neoliberal urban ecology where diff erent conceptions of what constitutes progress in contemporary Peru infl uence the landscape. Using an analytical lens that takes material...... and organizational infrastructures and practices into account, and situates these in specifi c historical processes, the article argues that farmers within the urban landscape of Arequipa struggle to reclaim land and water, and reassert a status that they experience to be losing. Such a historical focus on material...

Gene expression study and pathway analysis of histological subtypes of intestinal metaplasia that progress to gastric cancer.

Directory of Open Access Journals (Sweden)

Osmel Companioni

Full Text Available Intestinal metaplasia (IM is a precursor lesion that precedes gastric cancer (GC. There are two IM histological subtypes, complete (CIM and incomplete (IIM, the latter having higher progression rates to GC. This study was aimed at analysing gene expression and molecular processes involved in the progression from normal mucosa to IM, and also from IM subtypes to GC.We used expression data to compare the transcriptome of healthy gastric mucosa to that of IM not progressing to GC, and the transcriptome of IM subtypes that had progressed to GC to those that did not progress. Some deregulated genes were validated and pathway analyses were performed.Comparison of IM subtypes that had progressed to GC with those that did not progress showed smaller differences in the expression profiles than the comparison of IM that did not progress with healthy mucosa. New transcripts identified in IM not progressing to GC included TRIM, TMEM, homeobox and transporter genes and SNORD116. Comparison to normal mucosa identified non tumoral Warburg effect and melatonin degradation as previously unreported processes involved in IM. Overexpressed antigen processing is common to both IM-subtypes progressing to GC, but IIM showed more over-expressed oncogenic genes and molecular processes than CIM.There are greater differences in gene expression and molecular processes involved in the progression from normal healthy mucosa to IM than from IM to gastric cancer. While antigen processing is common in both IM-subtypes progressing to GC, more oncogenic processes are observed in the progression of IIM.

Progress in gamma processing of commercial products

International Nuclear Information System (INIS)

Fraser, F.M.

1988-01-01

In this paper the global outlook for gamma radiation processing of commercial products is discussed. Canada's contribution to the development of the industry is presented. New developments in the applications of the process and its marketing are discussed. (U.K.)

Information literacy progression within the Environmental science program at Linköping University

Directory of Open Access Journals (Sweden)

Kajsa Gustafsson Åman

2013-12-01

Full Text Available Since the Environmental Science program at Linköping University started 1998 the author has been liaison librarian. The program is a three-year candidate program with approximately 60 students enrolled per year. Information literacy is of vital importance for the teachers and the students. Collaboration between the liaison librarian, the teachers and the administrator is the fundament. During the years a curriculum for Information literacy has evolved. The initiative for the evolvement comes from both librarian and teachers. The program consists today of fifteen different parts with education in information literacy with a progression during the three-year program. Special concern is given to progression, learning design, learning environments and quality development. An important part is appendixes in connection to the student essay. The appendixes consist of reflections on the search of information for the essay in order to make the students more conscious about their Information Literacy processes.

Using intranet-based order sets to standardize clinical care and prepare for computerized physician order entry.

Science.gov (United States)

Heffner, John E; Brower, Kathleen; Ellis, Rosemary; Brown, Shirley

2004-07-01

The high cost of computerized physician order entry (CPOE) and physician resistance to standardized care have delayed implementation. An intranet-based order set system can provide some of CPOE's benefits and offer opportunities to acculturate physicians toward standardized care. INTRANET CLINICIAN ORDER FORMS (COF): The COF system at the Medical University of South Carolina (MUSC) allows caregivers to enter and print orders through the intranet at points of care and to access decision support resources. Work on COF began in March 2000 with transfer of 25 MUSC paper-based order set forms to an intranet site. Physician groups developed additional order sets, which number more than 200. Web traffic increased progressively during a 24-month period, peaking at more than 6,400 hits per month to COF. Decision support tools improved compliance with Centers for Medicare & Medicaid Services core indicators. Clinicians demonstrated a willingness to develop and use order sets and decision support tools posted on the COF site. COF provides a low-cost method for preparing caregivers and institutions to adopt CPOE and standardization of care. The educational resources, relevant links to external resources, and communication alerts will all link to CPOE, thereby providing a head start in CPOE implementation.

Progress in bioleaching: part B: applications of microbial processes by the minerals industries.

Science.gov (United States)

Brierley, Corale L; Brierley, James A

2013-09-01

This review presents developments and applications in bioleaching and mineral biooxidation since publication of a previous mini review in 2003 (Olson et al. Appl Microbiol Biotechnol 63:249-257, 2003). There have been discoveries of newly identified acidophilic microorganisms that have unique characteristics for effective bioleaching of sulfidic ores and concentrates. Progress has been made in understanding and developing bioleaching of copper from primary copper sulfide minerals, chalcopyrite, covellite, and enargite. These developments point to low oxidation-reduction potential in concert with thermophilic bacteria and archaea as a potential key to the leaching of these minerals. On the commercial front, heap bioleaching of nickel has been commissioned, and the mineral biooxidation pretreatment of sulfidic-refractory gold concentrates is increasingly used on a global scale to enhance precious metal recovery. New and larger stirred-tank reactors have been constructed since the 2003 review article. One biooxidation-heap process for pretreatment of sulfidic-refractory gold ores was also commercialized. A novel reductive approach to bioleaching nickel laterite minerals has been proposed.

The Key Principles of Process Manager Motivation in Production and Administration Processes in an Industrial Enterprise

Directory of Open Access Journals (Sweden)

Chromjakova Felicita

2016-03-01

Full Text Available The basic premise of sustainable development is that companies should completely re-evaluate their enterprise work logic and process organization. Most of the necessary changes concern employee stimulation and motivation. If we are truly interested in improving business results and the effectiveness of business processes – there would be no progress otherwise – we have to strive to break down the barriers between company management (leadership and employees in order to establish effective relationships between firms and customers. This paper presents research results of process manager activities in modern industrial enterprises, connected with a methodology proposal for the systematically-oriented process manager motivation of employees in accordance with the increased competitiveness of production and administration processes. It also presents an effective methodology of how to increase the positive effects of welldefined employee motivations from the process manager´s perspective. The core benefit of this methodology lies in the design of a systematic approach to the motivation process from the process manager side, allowing for radical performance improvement via production and administrative processes and the increased competitiveness of enterprise processes.

Progressive apraxia of speech as a window into the study of speech planning processes.

Science.gov (United States)

Laganaro, Marina; Croisier, Michèle; Bagou, Odile; Assal, Frédéric

2012-09-01

We present a 3-year follow-up study of a patient with progressive apraxia of speech (PAoS), aimed at investigating whether the theoretical organization of phonetic encoding is reflected in the progressive disruption of speech. As decreased speech rate was the most striking pattern of disruption during the first 2 years, durational analyses were carried out longitudinally on syllables excised from spontaneous, repetition and reading speech samples. The crucial result of the present study is the demonstration of an effect of syllable frequency on duration: the progressive disruption of articulation rate did not affect all syllables in the same way, but followed a gradient that was function of the frequency of use of syllable-sized motor programs. The combination of data from this case of PAoS with previous psycholinguistic and neurolinguistic data, points to a frequency organization of syllable-sized speech-motor plans. In this study we also illustrate how studying PAoS can be exploited in theoretical and clinical investigations of phonetic encoding as it represents a unique opportunity to investigate speech while it progressively disrupts. Copyright © 2011 Elsevier Srl. All rights reserved.

Finite difference order doubling in two dimensions

International Nuclear Information System (INIS)

Killingbeck, John P; Jolicard, Georges

2008-01-01

An order doubling process previously used to obtain eighth-order eigenvalues from the fourth-order Numerov method is applied to the perturbed oscillator in two dimensions. A simple method of obtaining high order finite difference operators is reported and an odd parity boundary condition is found to be effective in facilitating the smooth operation of the order doubling process

Progress in radiation processing of polymers

Science.gov (United States)

Chmielewski, Andrzej G.; Haji-Saeid, Mohammad; Ahmed, Shamshad

2005-07-01

Modification in polymeric structure of plastic material can be brought either by conventional chemical means or by exposure to ionization radiation from ether radioactive sources or highly accelerated electrons. The prominent drawbacks of chemical cross-linking typically involve the generation of noxious fumes and by products of peroxide degradation. Both the irradiation sources have their merits and limitations. Increased utilization of electron beams for modification and enhancement of polymer materials has been in particular witnessed over the past 40 years. The paper highlights several recent cases of EB utilization to improve key properties of selected plastic products. In paper is provided a survey of radiation processing methods of industrial interest, encompassing technologies which are already commercially well established, through developments in the active R&D stage which show pronounced promise for future commercial use. Radiation cross-linking technologies discussed include: application in cable and wire, application in rubber tyres, radiation vulcanization of rubber latex, development of radiation crosslinked SiC fiber, polymer recycling, development of gamma compatible pp, hydrogels etc. Over the years, remarkable advancement has been achieved in radiation processing of natural polymers. Role of radiation in improving the processing of temperature of PCL for use as biodegradable polymer, in accelerated breakdown of cellulose into viscose and enhancement in yields of chitin/chitosan from sea-food waste, is described.

Progress in radiation processing of polymers

Energy Technology Data Exchange (ETDEWEB)

Chmielewski, Andrzej G. [International Atomic Energy Agency, Industrial Applications and Chemistry Section, Division of Physical and Chemical Sciences, Department of Nuclear Sciences and Applications, Wagramer Street 5, Vienna 1400 (Austria) and Department of Process and Chemical Engineering, Warsaw University of Technology, Warsaw (Poland)]. E-mail: a-g.chmielewski@iaea.org; Haji-Saeid, Mohammad [International Atomic Energy Agency, Industrial Applications and Chemistry Section, Division of Physical and Chemical Sciences, Department of Nuclear Sciences and Applications, Wagramer Street 5, Vienna 1400 (Austria); Ahmed, Shamshad [Applied Chemistry Laboratories, Pakistan Institute of Nuclear Science and Technology, P.O. Box Nilore, Islamabad (Pakistan)

2005-07-01

Modification in polymeric structure of plastic material can be brought either by conventional chemical means or by exposure to ionization radiation from ether radioactive sources or highly accelerated electrons. The prominent drawbacks of chemical cross-linking typically involve the generation of noxious fumes and by products of peroxide degradation. Both the irradiation sources have their merits and limitations. Increased utilization of electron beams for modification and enhancement of polymer materials has been in particular witnessed over the past 40 years. The paper highlights several recent cases of EB utilization to improve key properties of selected plastic products. In paper is provided a survey of radiation processing methods of industrial interest, encompassing technologies which are already commercially well established, through developments in the active R and D stage which show pronounced promise for future commercial use. Radiation cross-linking technologies discussed include: application in cable and wire, application in rubber tyres, radiation vulcanization of rubber latex, development of radiation crosslinked SiC fiber, polymer recycling, development of gamma compatible pp, hydrogels etc. Over the years, remarkable advancement has been achieved in radiation processing of natural polymers. Role of radiation in improving the processing of temperature of PCL for use as biodegradable polymer, in accelerated breakdown of cellulose into viscose and enhancement in yields of chitin/chitosan from sea-food waste, is described.

Progress in radiation processing of polymers

International Nuclear Information System (INIS)

Chmielewski, Andrzej G.; Haji-Saeid, Mohammad; Ahmed, Shamshad

2005-01-01

Modification in polymeric structure of plastic material can be brought either by conventional chemical means or by exposure to ionization radiation from ether radioactive sources or highly accelerated electrons. The prominent drawbacks of chemical cross-linking typically involve the generation of noxious fumes and by products of peroxide degradation. Both the irradiation sources have their merits and limitations. Increased utilization of electron beams for modification and enhancement of polymer materials has been in particular witnessed over the past 40 years. The paper highlights several recent cases of EB utilization to improve key properties of selected plastic products. In paper is provided a survey of radiation processing methods of industrial interest, encompassing technologies which are already commercially well established, through developments in the active R and D stage which show pronounced promise for future commercial use. Radiation cross-linking technologies discussed include: application in cable and wire, application in rubber tyres, radiation vulcanization of rubber latex, development of radiation crosslinked SiC fiber, polymer recycling, development of gamma compatible pp, hydrogels etc. Over the years, remarkable advancement has been achieved in radiation processing of natural polymers. Role of radiation in improving the processing of temperature of PCL for use as biodegradable polymer, in accelerated breakdown of cellulose into viscose and enhancement in yields of chitin/chitosan from sea-food waste, is described

Double dissociation between first- and second-order processing.

Science.gov (United States)

Allard, Rémy; Faubert, Jocelyn

2007-04-01

To study the difference of sensitivity to luminance- (LM) and contrast-modulated (CM) stimuli, we compared LM and CM detection thresholds in LM- and CM-noise conditions. The results showed a double dissociation (no or little inter-attribute interaction) between the processing of these stimuli, which implies that both stimuli must be processed, at least at some point, by separate mechanisms and that both stimuli are not merged after a rectification process. A second experiment showed that the internal equivalent noise limiting the CM sensitivity was greater than the one limiting the carrier sensitivity, which suggests that the internal noise occurring before the rectification process is not limiting the CM sensitivity. These results support the hypothesis that a suboptimal rectification process partially explains the difference of LM and CM sensitivity.

[Musical long-term memory throughout the progression of Alzheimer disease].

Science.gov (United States)

Groussard, Mathilde; Mauger, Caroline; Platel, Hervé

2013-03-01

In Alzheimer patients with a solid musical background, isolated case-reports have reported the maintenance of remarkable musical abilities despite clear difficulties in their verbal memory and linguistic functions. These reports have encouraged a number of scientists to undertake more systematic studies which would allow a rigorous approach to the analysis of musical memory in Alzheimer patients with no formal musical background. Although restricted in number, the latest data are controversial regarding preserved musical capacities in Alzheimer patients. Our current review of the literature addresses this topic and advances the hypothesis that the processes of musical memory are function of illness progression. In the earlier stages, the majority of evaluations concerned musical episodic memory and suggested a dysfunction of this memory whereas in the moderate and severe stages, musical semantic memory and implicit learning are the majority of investigations and seemed more resistant to Alzheimer disease. In summary, our current review bring to understand the memory circuits involved and highlight the necessity to adapted the investigational tools employed to conform with the severity of the signs and symptoms of progressive Alzheimer disease in order to demonstrate the preserved musical capacities.

Optimal PID settings for first and second-order processes - Comparison with different controller tuning approaches

OpenAIRE

Pappas, Iosif

2016-01-01

PID controllers are extensively used in industry. Although many tuning methodologies exist, finding good controller settings is not an easy task and frequently optimization-based design is preferred to satisfy more complex criteria. In this thesis, the focus was to find which tuning approaches, if any, present close to optimal behavior. Pareto-optimal controllers were found for different first and second-order processes with time delay. Performance was quantified in terms of the integrat...

POOR PROGRESS STUDENTS IN LEARNING MATHEMATICS AS SOCIAL AND PSYCHOLOGICAL-PEDAGOGICAL PROBLEM

Directory of Open Access Journals (Sweden)

Vladimir Tatochenko

2016-09-01

Full Text Available The article is devoted to theoretical substantiation of modern methodical system of Mathematics teaching of poor progressing secondary school pupils. A systematic approach to the study of psycho-pedagogical determinants of poor progress of pupils in math was implemented. The dynamic of interfunctional relationship of structure of educational and informative sphere of poor progressing pupils in mathematics was disclosed and scientific understanding of this process was expanded. The introduction in the educational process of didactic methodical and psychologically balanced methodical control system and correction of poor progressing students’ in Maths improves quality indicators of their permanent knowledge and skills. It allows you to discover the fullness, depth and durability of learning at different stages and levels of education, it contributes to correction, management and partly self-management learning process of poor progressing students in Mathematics, excites them to an active mental activity promotes the development of a conscious attitude to their systematic academic work. The essence of “poor progress” phenomena is observed as well as “educational retardation” of school students during teaching mathematics. Target orientation, the resource potential of the real educational process of poor progressing pupils in Mathematics are determined. Contradictions are singled out and pedagogical conditions of results control of learning outcomes of comprehensive school pupils are proved. An attempt to consider the academic failure of schoolchildren in Mathematics in connection with the main categories of didactics – the content and the learning process was made. Certain shortcomings of teaching and learning activities of students in the study of Mathematics are highlighted as poor progressing elements and gaps. The process and content, enriched with the use of NIT, ensuring the formation of key competencies of lagging behind and

Progressive Recruitment of Mesenchymal Progenitors Reveals a Time-Dependent Process of Cell Fate Acquisition in Mouse and Human Nephrogenesis.

Science.gov (United States)

Lindström, Nils O; De Sena Brandine, Guilherme; Tran, Tracy; Ransick, Andrew; Suh, Gio; Guo, Jinjin; Kim, Albert D; Parvez, Riana K; Ruffins, Seth W; Rutledge, Elisabeth A; Thornton, Matthew E; Grubbs, Brendan; McMahon, Jill A; Smith, Andrew D; McMahon, Andrew P

2018-06-04

Mammalian nephrons arise from a limited nephron progenitor pool through a reiterative inductive process extending over days (mouse) or weeks (human) of kidney development. Here, we present evidence that human nephron patterning reflects a time-dependent process of recruitment of mesenchymal progenitors into an epithelial nephron precursor. Progressive recruitment predicted from high-resolution image analysis and three-dimensional reconstruction of human nephrogenesis was confirmed through direct visualization and cell fate analysis of mouse kidney organ cultures. Single-cell RNA sequencing of the human nephrogenic niche provided molecular insights into these early patterning processes and predicted developmental trajectories adopted by nephron progenitor cells in forming segment-specific domains of the human nephron. The temporal-recruitment model for nephron polarity and patterning suggested by direct analysis of human kidney development provides a framework for integrating signaling pathways driving mammalian nephrogenesis. Copyright © 2018 Elsevier Inc. All rights reserved.

Acquisition of Malay Word Recognition Skills: Lessons from Low-Progress Early Readers

Science.gov (United States)

Lee, Lay Wah; Wheldall, Kevin

2011-01-01

Malay is a consistent alphabetic orthography with complex syllable structures. The focus of this research was to investigate word recognition performance in order to inform reading interventions for low-progress early readers. Forty-six Grade 1 students were sampled and 11 were identified as low-progress readers. The results indicated that both…

Communication of nuclear data progress

International Nuclear Information System (INIS)

2001-01-01

This is the 26th issue of Communication of Nuclear Data Progress (CNDP), in which the progress and achievements in nuclear data field from the last year up to now in China are carried. It includes the measurements of 71 Ga, 94 Zn, 191 Ir, 174 Hf(n, γ) and 114 Cd(n, 2n) cross sections, fission product yields of n + 235,238 U, DPA cross section calculated with UNF code, fission barrier parameter evaluation of some nuclides, production and transmission of covariance in the evaluation processing of fission yield data and transition analysis of Ne-like Ge XXIII

Progress in catalytic naphtha reforming process: A review

International Nuclear Information System (INIS)

Rahimpour, Mohammad Reza; Jafari, Mitra; Iranshahi, Davood

2013-01-01

Catalytic naphtha reforming process is a vital process for refineries due to the production of high-octane components, which is intensely demanded in our modern life. The significance of this industrial process induced researchers to investigate different aspects of catalytic naphtha reforming process intensively. Some of the investigators try to improve this process by representing more effective catalysts, while others try to elucidate its kinetic and deactivation mechanisms and design more efficient reactor setups. The amount of these established papers is so much that may confuse some of the researchers who want to find collective information about catalytic naphtha reforming process. In the present paper, the published studies from 1949 until now are categorized into three main groups including finding suitable catalyst, revealing appropriate kinetic and deactivation model, and suggesting efficient reactor configuration and mode of operation. These studies are reviewed separately, and a suitable reference is provided for those who want to have access to generalized information about catalytic naphtha reforming process. Finally, various suggestions for revamping the catalytic naphtha reforming process have been proposed as a guideline for further investigations

Steam coal processing technology: handling, high-order processing, COM, meth-coal

Energy Technology Data Exchange (ETDEWEB)

Kamata, H.; Onodera, J.

1982-01-01

Topics covered include: various handling techologies (overland and marine transport, storage, water removal, drying, comminution and sizing); various coal processing technologies (gravity concentration, magnetic separation, multi-stage flotation, liquid-phase pelletizing, chemical processing); production methods for coal-oil mixtures (COM), their physical properties, stability, storage, transport, advantages, plus recent trends in research and development; production of coal-methanol slurry (meth-coal), its stability, storage, transport, utilization and environmental problems, plus latest trends in research and development. (In Japanese)

Progress in developing processes for converting 99Mo production from high- to low-enriched uranium--1998

International Nuclear Information System (INIS)

Conner, C.

1998-01-01

During 1998, the emphasis of our activities was focused mainly on target fabrication. Successful conversion requires a reliable irradiation target; the target being developed uses thin foils of uranium metal, which can be removed from the target hardware for dissolution and processing. This paper describes successes in (1) improving our method for heat-treating the uranium foil to produce a random-small grain structure, (2) improving electrodeposition of zinc and nickel fission-fragment barriers onto the foil, and (3) showing that these fission fragment barriers should be stable during transport of the targets following irradiation. A method was also developed for quantitatively electrodepositing uranium and plutonium contaminants in the 99 Mo. Progress was also made in broadening international cooperation in our development activities

Domestic Violence Protective Orders: A Qualitative Examination of Judges' Decision-Making Processes.

Science.gov (United States)

Agnew-Brune, Christine; Beth Moracco, Kathryn E; Person, Cara J; Bowling, J Michael

2015-06-17

Approximately one in three women in the United States experience intimate partner violence (IPV). IPV is associated with long-term negative health consequences; therefore, there is a need to examine potential prevention strategies. Evidence suggests that domestic violence protective orders (DVPOs), a legal intervention that prevents contact between two parties for up to 12 months, are an effective secondary prevention tool. However, because judges have relative autonomy in granting or denying DVPOs, research is needed to examine the processes they use to guide their decisions. The aim of the study was to investigate how District Court judges decide whether to issue a DVPO. Using in-depth interviews with 20 North Carolina District Court judges, the present study addressed three research questions: (a) what factors influence judges' decisions to grant or deny a DVPO, (b) what heuristics or cognitive shortcuts potentially guide their decisions, and (c) what judges worry about when making decisions. Three themes emerged from the data analyses: (a) violent incidents must reach a certain threshold, (b) the presence of children creates competing concerns, and (c) judges worry about the negative impact their decisions may have on the lives of those involved. Recommendations for improving the DVPO issuance process are also discussed. © The Author(s) 2015.

Review of progress in pulsed laser deposition and using Nd:YAG laser in processing of high Tc superconductors

International Nuclear Information System (INIS)

Chen, C.W.; Mukherjee, K.

1993-01-01

The current progress in pulsed laser ablation of high-temperature superconductors is reviewed with emphasis on the effect of pulse-width and wavelength, nature of the plasma plume, post-annealing and methods to improve quality of films grown at low temperature. An ion beam assisted millisecond pulsed laser vapor deposition process has been developed to fabricate YBa 2 Cu 3 O x high T. superconductor thin films. Solution to target overheating problem, effects of oxygen ion beam, properties of deposited films, and effect of silver buffer layer on YSZ substrate are presented. A new laser calcining process has been used to produce near single phase high T c superconductors of Bi-Pb-Sr-Ca-Cu-0 system. The total processing time was reduced to about 100 hours which is about half of that for conventional sintering. For this compound both resistance and magnetic susceptibility data showed an onset of superconducting transition at about 110K. A sharp susceptibility drop was observed above 106K. The zero resistance temperature was about 98K. High T c phase was formed via a different kinetic path in laser calcined sample compare with the conventionally processed sample

Progress report 1971/72

International Nuclear Information System (INIS)

1972-01-01

The progress report comprises reports from interdisciplinary task groups on radiation protection, isotope application and radiation measurement technique, microscopy, linear accelerators, process computers, biophysics and nuclear physics. The last task group reports on work with the electron linear accelerator, nuclear spectroscopy, neutron physics, work with polarized particles, and experiments with the GSI heavy ion accelerator. (orig./AK) [de

Waltzing between Order and Ordering - a Social Practice Perspective

DEFF Research Database (Denmark)

Sørensen, Brian Vejrum; Boer, Harry

2007-01-01

Organisations are often depicted as strategic intention seeking entities creating strategic objects that form pockets of order in uncertain environments. This design-based view of strategic development is challenged in this paper. The paper illustrates that organisations in building dynamic capab...... change. We find that potentially stabilising objects are underutilised as part of the ongoing ordering process, because they are generally treated as fixed objects rather than as common ground for negotiation and thus dynamic capabilities. ...

Placement of effective work-in-progress limits in route-specific unit-based pull systems

NARCIS (Netherlands)

Ziengs, N.; Riezebos, J.; Germs, R.

2012-01-01

Unit-based pull systems control the throughput time of orders in a production system by limiting the number of orders on the shop floor. In production systems where orders can follow different routings on the shop floor, route-specific pull systems that control the progress of orders on the shop

Consequences of Stimulus Type on Higher-Order Processing in Single-Sided Deaf Cochlear Implant Users.

Science.gov (United States)

Finke, Mareike; Sandmann, Pascale; Bönitz, Hanna; Kral, Andrej; Büchner, Andreas

2016-01-01

Single-sided deaf subjects with a cochlear implant (CI) provide the unique opportunity to compare central auditory processing of the electrical input (CI ear) and the acoustic input (normal-hearing, NH, ear) within the same individual. In these individuals, sensory processing differs between their two ears, while cognitive abilities are the same irrespectively of the sensory input. To better understand perceptual-cognitive factors modulating speech intelligibility with a CI, this electroencephalography study examined the central-auditory processing of words, the cognitive abilities, and the speech intelligibility in 10 postlingually single-sided deaf CI users. We found lower hit rates and prolonged response times for word classification during an oddball task for the CI ear when compared with the NH ear. Also, event-related potentials reflecting sensory (N1) and higher-order processing (N2/N4) were prolonged for word classification (targets versus nontargets) with the CI ear compared with the NH ear. Our results suggest that speech processing via the CI ear and the NH ear differs both at sensory (N1) and cognitive (N2/N4) processing stages, thereby affecting the behavioral performance for speech discrimination. These results provide objective evidence for cognition to be a key factor for speech perception under adverse listening conditions, such as the degraded speech signal provided from the CI. © 2016 S. Karger AG, Basel.

Dynamic process analysis by moments of extreme orders

Czech Academy of Sciences Publication Activity Database

Šimberová, Stanislava; Suk, Tomáš

2016-01-01

Roč. 14, January (2016), s. 43-51 ISSN 2213-1337 R&D Projects: GA ČR GA15-16928S Institutional support: RVO:67985815 ; RVO:67985556 Keywords : high-order moments * principal component analysis * frequency analysis Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics; BD - Theory of Information (UTIA-B) Impact factor: 2.010, year: 2016

Challenges of the Banking Integration Process in the Case of the New EU Member States

Directory of Open Access Journals (Sweden)

Dan Chirlean

2011-04-01

Full Text Available The creation of the single European market represents a 50 years long process which aimsat developing the most advanced economy in the world. In order to achieve this, political actions mustbe accompanied by economical and juridical changes in order to stimulate and foster the creation ofthe single European market. A key component of this process is represented by the integration of thefinancial sector. While several component of it have registered major transformations andachievements in the integration process, one of the least integrated parts is represented by theEuropean banking sector. Most of the European economies are funded directly through the bankingsector, thus the integration of this sector represents a major benchmarks in the European integrationprocess. This problem becomes more complex in the context of the European Union enlargement to27 member states. Thus, the aim of this paper is to underline the progresses achieved by the bankingsectors of the European Union new member states from Central and Eastern Europe in theirintegration process. In order to achieve this we will use an empirical analysis based on the Law of OnePrice, which will underline the progress made by the banking sectors of the panel countries: Poland,Czech Republic, Slovenia, Slovakia, Romania and Bulgaria. The results of the research will providean overview of the main achievements registered by these countries, while also underling hownational particularities of these sectors affect their integration.

Propagation effects in the generation process of high-order vortex harmonics.

Science.gov (United States)

Zhang, Chaojin; Wu, Erheng; Gu, Mingliang; Liu, Chengpu

2017-09-04

We numerically study the propagation of a Laguerre-Gaussian beam through polar molecular media via the exact solution of full-wave Maxwell-Bloch equations where the rotating-wave and slowly-varying-envelope approximations are not included. It is found that beyond the coexistence of odd-order and even-order vortex harmonics due to inversion asymmetry of the system, the light propagation effect results in the intensity enhancement of a high-order vortex harmonics. Moreover, the orbital momentum successfully transfers from the fundamental laser driver to the vortex harmonics which topological charger number is directly proportional to its order.

Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

Science.gov (United States)

Ma, K.; Thomassey, S.; Zeng, X.

2017-10-01

In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

High-order harmonic generation with short-pulse lasers

International Nuclear Information System (INIS)

Schafer, K.J.; Krause, J.L.; Kulander, K.C.

1992-12-01

Recent progress in the understanding of high-order harmonic conversion from atoms and ions exposed to high-intensity, short-pulse optical lasers is reviewed. We find that ions can produce harmonics comparable in strength to those obtained from neutral atoms, and that the emission extends to much higher order. Simple scaling laws for the strength of the harmonic emission and the maximium observable harmonic are suggested. These results imply that the photoemission observed in recent experiments in helium and neon contains contributions from ions as well as neutrals

A computational method for computing an Alzheimer’s Disease Progression Score; experiments and validation with the ADNI dataset

Science.gov (United States)

Jedynak, Bruno M.; Liu, Bo; Lang, Andrew; Gel, Yulia; Prince, Jerry L.

2014-01-01

Understanding the time-dependent changes of biomarkers related to Alzheimer’s disease (AD) is a key to assessing disease progression and to measuring the outcomes of disease-modifying therapies. In this paper, we validate an Alzheimer’s disease progression score model which uses multiple biomarkers to quantify the AD progression of subjects following three assumptions: (1) there is a unique disease progression for all subjects, (2) each subject has a different age of onset and rate of progression, and (3) each biomarker is sigmoidal as a function of disease progression. Fitting the parameters of this model is a challenging problem which we approach using an alternating least squares optimization algorithm. In order to validate this optimization scheme under realistic conditions, we use the Alzheimer’s Disease Neuroimaging Initiative (ADNI) cohort. With the help of Monte Carlo simulations, we show that most of the global parameters of the model are tightly estimated, thus enabling an ordering of the biomarkers that fit the model well, ordered as: the Rey auditory verbal learning test with 30 minutes delay, the sum of the two lateral hippocampal volumes divided by the intra-cranial volume, followed by (the clinical dementia rating sum of boxes score and the mini mental state examination score) in no particular order and lastly the Alzheimer’s disease assessment scale-cognitive subscale. PMID:25444605

Harvard--MIT research program in short-lived radiopharmaceuticals. Progress report, September 1, 1977--April 30, 1978

International Nuclear Information System (INIS)

Adelstein, S.J.; Brownell, G.L.

1978-05-01

Progress is reported on the following studies: chemistry studies designed to achieve a more complete understanding of the fundamental chemistry of technetium in order to facilitate the design of future radiopharmaceuticals incorporating the radionuclide /sup 99m/Tc; the development of new radiopharmaceuticals intended to improve image quality and lower radiation doses by the use of short-lived radionuclides and disease-specific agents; the development of short-lived positron-emitting radionuclides which offer advantages in transverse section imaging of regional physiological processes; and studies of the toxic effects of particulate radiation

Progressivity Enhanced

Directory of Open Access Journals (Sweden)

Marko Hren

2013-09-01

Full Text Available Rather than a scientific text, the author contributes a concise memorandum from the originator of the idea who has managed the campaign for the conversion of the military barracks into a creative cluster between 1988 and 2002, when he parted ways with Metelkova due to conflicting views on the center’s future. His views shed light on a distant period of time from a perspective of a participant–observer. The information is abundantly supported by primary sources, also available online. However, some of the presented hypotheses are heavily influenced by his personal experiences of xenophobia, elitism, and predatorial behavior, which were already then discernible on the so-called alternative scene as well – so much so that they obstructed the implementation of progressive programs. The author claims that, in spite of the substantially different reality today, the myths and prejudices concerning Metelkova must be done away with in order to enhance its progressive nature. Above all, the paper calls for an objective view on internal antagonisms, mainly originating in deep class divisions between the users. These make a clear distinction between truly marginal ndividuals and the overambitious beau-bourgeois, as the author labels the large part of users of Metelkova of »his« time. On these grounds, he argues for a robust approach to ban all forms of xenophobia and self-ghettoization.

Progress in instrumentation and control in the Federal Republic of Germany

International Nuclear Information System (INIS)

Bastl, W.

1990-01-01

The development of I and C in the Federal Republic of Germany is influenced mainly by three factors, the stagnation to order new plants, the need to retrofit operating plants, and the fast technological progress in electronics. Since the life time of I and C in a plant is about one third of the overall plant life, there is enough impact onto developing I and C using new technologies. This leads to more extensive use of signal processing by means of computers and to the introduction of algorithms for providing higher level information. Presentation techniques employ colored graphics or diagrams on CRTs, which in term can be used to initiate manual control actions. Advanced control room concepts aim at operator information which is adapted to the process situation. New methodologies focus on advanced information tasks like diagnosis and prognosis. In addition midterm research work started on developments for new I and C concepts. (author)

[The impact of electronic cigarettes usage on the endothelial function and the progression of atherosclerosis].

Science.gov (United States)

Knura, Miłosz; Dragon, Jonasz; Łabuzek, Krzysztof; Okopień, Bogusław

2018-01-23

The exponetial growth in popularity of electronic cigarettes in the world markets intensifies the debate about their health effects. The smoking of traditional tabacoo products is a factor associated with the endothelium damage and progression of atherosclerosis. The elimination of the combustion process in electronic cigarettes allows to conclude that they are less harmful to a vascular endothelium than traditional tobacco products. E-cigarette aerosol contains many compounds that have an influence on initiation and progression of atherosclerosis. Nicotine protherogenic action is not fully explained. On one hand, nicotine modifies metabolic pathways leading to atherosclerosis, whereas epidemiological studies do not show an increased risk of cardiovascular disease in the population using nicotine replacement therapy or snuff. Acrolein, formaldehyde and the ultrafine particles generated during e-liquid heating have an impact on initiation and progression of atherosclerosis, but their level is lower than that of tobacco smoke. In order to assess accurately the longterm effects of e-cigarettes, it is necessary to conduct epidemiological studies measuring the effects of using e-cigarettes. It is claimed that the use of electronic cigarettes has a potential impact on the development of atherosclerosis, but is significantly lower than that of traditional cigarettes.

The low-order wavefront control system for the PICTURE-C mission: high-speed image acquisition and processing

Science.gov (United States)

Hewawasam, Kuravi; Mendillo, Christopher B.; Howe, Glenn A.; Martel, Jason; Finn, Susanna C.; Cook, Timothy A.; Chakrabarti, Supriya

2017-09-01

The Planetary Imaging Concept Testbed Using a Recoverable Experiment - Coronagraph (PICTURE-C) mission will directly image debris disks and exozodiacal dust around nearby stars from a high-altitude balloon using a vector vortex coronagraph. The PICTURE-C low-order wavefront control (LOWC) system will be used to correct time-varying low-order aberrations due to pointing jitter, gravity sag, thermal deformation, and the gondola pendulum motion. We present the hardware and software implementation of the low-order ShackHartmann and reflective Lyot stop sensors. Development of the high-speed image acquisition and processing system is discussed with the emphasis on the reduction of hardware and computational latencies through the use of a real-time operating system and optimized data handling. By characterizing all of the LOWC latencies, we describe techniques to achieve a framerate of 200 Hz with a mean latency of ˜378 μs

Effect of degree of order of silicon dioxide on localization processes of non-equilibrium charge carriers under the influence of gamma-radiation

CERN Document Server

Garibov, A A; Agaev, T N

1999-01-01

The effect of the degree of order of SiO sub 2 on the localization process of non-equilibrium charge carriers (NCC) when exposed to gamma-quanta at 77 K has been investigated. It has been found that with decreasing SiO sub 2 structure degree of order, a localization probability of NCC increases. A contribution of surface defect states in SiO sub 2 to localization, migration and recombination annihilation processes of NCC induced by ionizing radiation has been determined.

The 2nd State of the Carbon Cycle Report (SOCCR-2): Process, Progress and Institutional Context

Science.gov (United States)

Shrestha, G.; Cavallaro, N.; Zhu, Z.; Larson, E. K.; Butler, J. H.

2017-12-01

Over 200 scientists and program managers from U.S., Mexican and Canadian government and non-government institutions have been collaborating on SOCCR-2 since 2015. Responding to the U.S. Global Change Research Act (1990) and the U.S. Carbon Cycle Science Plan (2011), this special Sustained National Climate Assessment report covers many of the GCRA mandated sectors such as agriculture, energy, forestry, aquatic systems, coasts, wetlands, atmospheric and human social systems, integrating the scientific uncertainties and analyzing the effects of global change on the carbon cycle and vice versa, including projections for both human- induced and natural changes. This presentation covers the SOCCR-2 process, progress and institutional context, providing a historical perspective on the interagency instruments and mechanisms that have facilitated the last decades of carbon cycle science reflected in SOCCR-2.

Recent advances in ordered intermetallics

International Nuclear Information System (INIS)

Liu, C.T.

1995-01-01

Ordered intermetallic alloys based on aluminides and silicides offer many advantages for structural use at elevated temperatures in hostile environments. Their attractive properties include excellent oxidation and corrosion resistance, light weight, and superior strength at elevated temperatures. The major concern for structural use of intermetallics was their low ductility and poor fracture resistance at ambient temperatures. For the past ten years, considerable effort has been devoted to the research and development of ordered intermetallic alloys, and good progress has been made on understanding intrinsic and extrinsic factors controlling brittle fracture in intermetallic alloys based on aluminides and silicides. Parallel efforts on alloy design have led to the development of a number of ductile and strong intermetallic alloys based on Ni(3)Al, NiAl, Fe(3)Al, FeAl, Ti(3)Al and TiAl systems for structural applications. (orig.)

Demonstrating the effects of phonological similarity and frequency on item and order memory in Down syndrome using process dissociation

OpenAIRE

Smith, Elizabeth; Jarrold, Christopher

2014-01-01

It is important to distinguish between memory for item information and memory for order information when considering the nature of verbal short-term memory (vSTM) performance. Although other researchers have attempted to make this distinction between item and order memory in children, none has done so using process dissociation. This study shows that such an approach can be particularly useful and informative. Individuals with Down syndrome (DS) tend to experience a vSTM deficit. These two ex...

Prioritization of watersheds in order to perform administrative measures using fuzzy analytic hierarchy process

Directory of Open Access Journals (Sweden)

Seyyed Abdolhossein Arami

2017-01-01

Full Text Available Prioritization of watersheds in order to perform administrative measures is necessary and inevitable. Determining areas of top priority for flood control projects is a managerial decision that should be approved by studies of physical, social and economic status of the region of interesrt and by assessing the outcomes of the past operations. Therefore, the aim of this research was to study morphological and physiographic characteristics, and to use geographic information systems (GIS and multi-criteria decision-making methods (MCDM, to identify the critical sub-basins which have the tendency to be destructed, in Galikesh watershed, Golestan province. This watershed is important, yet critical, in terms of land use change, erosion and flooding in the Golestan Province, Iran. In total, nine morphological parameters were used to prioritize sub-watersheds using fuzzy analytic hierarchy process (FAHP. The morphological parameters were by some means linked to watershed drainage system. Based on FAHP approach, sub-basins, as vulnerable zones, have been evaluated and cetegorized in five priority levels (very low, low, medium, high and very high levels. The results showed that 44.44% and 22.22% of sub-basins were categorized respectively under average, and high to very high levels, suggesting that the conservation and management measures are essential in order to maintain stability in the region. Thus, the FAHP technique is a practical and convenient method to show potential zones in order to implement effective management strategies, especially in areas where data availability is low and soil diversity is high. Finally, it can be said that without having to encounter high costs and a waste of time, sub-basins could be categorized by means of morphometric parameters in order to implement conservational measures to simutaneously conserve soil and the environment

An Image Processing Approach to Pre-compensation for Higher-Order Aberrations in the Eye

Directory of Open Access Journals (Sweden)

Miguel Alonso Jr

2004-06-01

Full Text Available Human beings rely heavily on vision for almost all of the tasks that are required in daily life. Because of this dependence on vision, humans with visual limitations, caused by genetic inheritance, disease, or age, will have difficulty in completing many of the tasks required of them. Some individuals with severe visual impairments, known as high-order aberrations, may have difficulty in interacting with computers, even when using a traditional means of visual correction (e.g., spectacles, contact lenses. This is, in part, because these correction mechanisms can only compensate for the most regular (low-order distortions or aberrations of the image in the eye. This paper presents an image processing approach that will pre-compensate the images displayed on the computer screen, so as to counter the effect of the eye's aberrations on the image. The characterization of the eye required to perform this customized pre-compensation is the eye's Point Spread Function (PSF. Ophthalmic instruments generically called "Wavefront Analyzers" can now measure this description of the eye's optical properties. The characterization provided by these instruments also includes the "higher-order aberration components" and could, therefore, lead to a more comprehensive vision correction than traditional mechanisms. This paper explains the theoretical foundation of the methods proposed and illustrates them with experiments involving the emulation of a known and constant PSF by interposing a lens in the field of view of normally sighted test subjects.

GPR Raw-Data Order Statistic Filtering and Split-Spectrum Processing to Detect Moisture

Directory of Open Access Journals (Sweden)

Gokhan Kilic

2014-05-01

Full Text Available Considerable research into the area of bridge health monitoring has been undertaken; however, information is still lacking on the effects of certain defects, such as moisture ingress, on the results of ground penetrating radar (GPR surveying. In this paper, this issue will be addressed by examining the results of a GPR bridge survey, specifically the effect of moisture in the predicted position of the rebars. It was found that moisture ingress alters the radargram to indicate distortion or skewing of the steel reinforcements, when in fact destructive testing was able to confirm that no such distortion or skewing had occurred. Additionally, split-spectrum processing with order statistic filters was utilized to detect moisture ingress from the GPR raw data.

Regulations of enzymes in animals: effects of developmental processes, cancer and radiation. Progress report XI, 1 May 1976--30 April 1977

Energy Technology Data Exchange (ETDEWEB)

Knox, W.E.

1977-06-01

Two outstandingly successful studies were among those outlined in the proposal last year. They are the first and last topics summarized in this progress report: the first evidence that the chemical composition of human tumors can probably be predicted on the basis of our previous studies in the rat, and the elucidation of the function of the arginine-proline pathway, its importance in fetal and tumor tissues, and its regulation. The variety of other studies are summarized under headings somewhat different from those used in the original proposal, in order to denote more clearly what was actually found, but all proposed topics have been studied to some extent.

Regulations of enzymes in animals: effects of developmental processes, cancer and radiation. Progress report XI, 1 May 1976--30 April 1977

International Nuclear Information System (INIS)

Knox, W.E.

1977-06-01

Two outstandingly successful studies were among those outlined in the proposal last year. They are the first and last topics summarized in this progress report: the first evidence that the chemical composition of human tumors can probably be predicted on the basis of our previous studies in the rat, and the elucidation of the function of the arginine-proline pathway, its importance in fetal and tumor tissues, and its regulation. The variety of other studies are summarized under headings somewhat different from those used in the original proposal, in order to denote more clearly what was actually found, but all proposed topics have been studied to some extent

A whole-process progressive training mode to foster optoelectronic students' innovative practical ability

Science.gov (United States)

Zhong, Hairong; Xu, Wei; Hu, Haojun; Duan, Chengfang

2017-08-01

This article analyzes the features of fostering optoelectronic students' innovative practical ability based on the knowledge structure of optoelectronic disciplines, which not only reveals the common law of cultivating students' innovative practical ability, but also considers the characteristics of the major: (1) The basic theory is difficult, and the close combination of science and technology is obvious; (2)With the integration of optics, mechanics, electronics and computer, the system technology is comprehensive; (3) It has both leading-edge theory and practical applications, so the benefit of cultivating optoelectronic students is high ; (4) The equipment is precise and the practice is costly. Considering the concept and structural characteristics of innovative and practical ability, and adhering to the idea of running practice through the whole process, we put forward the construction of three-dimensional innovation and practice platform which consists of "Synthetically Teaching Laboratory + Innovation Practice Base + Scientific Research Laboratory + Major Practice Base + Joint Teaching and Training Base", and meanwhile build a whole-process progressive training mode to foster optoelectronic students' innovative practical ability, following the process of "basic experimental skills training - professional experimental skills training - system design - innovative practice - scientific research project training - expanded training - graduation project": (1) To create an in - class practical ability cultivation environment that has distinctive characteristics of the major, with the teaching laboratory as the basic platform; (2) To create an extra-curricular innovation practice activities cultivation environment that is closely linked to the practical application, with the innovation practice base as a platform for improvement; (3) To create an innovation practice training cultivation environment that leads the development of cutting-edge, with the scientific

Predicting inpatient clinical order patterns with probabilistic topic models vs conventional order sets.

Science.gov (United States)

Chen, Jonathan H; Goldstein, Mary K; Asch, Steven M; Mackey, Lester; Altman, Russ B

2017-05-01

Build probabilistic topic model representations of hospital admissions processes and compare the ability of such models to predict clinical order patterns as compared to preconstructed order sets. The authors evaluated the first 24 hours of structured electronic health record data for > 10 K inpatients. Drawing an analogy between structured items (e.g., clinical orders) to words in a text document, the authors performed latent Dirichlet allocation probabilistic topic modeling. These topic models use initial clinical information to predict clinical orders for a separate validation set of > 4 K patients. The authors evaluated these topic model-based predictions vs existing human-authored order sets by area under the receiver operating characteristic curve, precision, and recall for subsequent clinical orders. Existing order sets predict clinical orders used within 24 hours with area under the receiver operating characteristic curve 0.81, precision 16%, and recall 35%. This can be improved to 0.90, 24%, and 47% ( P  sets tend to provide nonspecific, process-oriented aid, with usability limitations impairing more precise, patient-focused support. Algorithmic summarization has the potential to breach this usability barrier by automatically inferring patient context, but with potential tradeoffs in interpretability. Probabilistic topic modeling provides an automated approach to detect thematic trends in patient care and generate decision support content. A potential use case finds related clinical orders for decision support. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Nucleosynthesis in the early Galaxy: Progress and challenges.

Science.gov (United States)

Montes, Fernando

2015-10-01

Chemical imprints left by the first stars in the oldest stars of the Milky Way gives clues of the stellar nucleosynthesis responsible for the creation of elements heavier than iron. Recent progress in astronomical observations and in the modeling of the chemical evolution of the Galaxy have shown that multiple nucleosynthesis processes may operate at those early times. In this talk I will review some of that evidence along with the important role that nuclear reactions play in those processes. I will focus in progress in our understanding of the rapid neutron capture process (r-process) and in new results on nucleosynthesis in core-collapse supernovae and neutrino-driven winds that produce elements up to silver. I will show some examples of recent nuclear physics measurements addressing the need for better nuclear data and give an outlook of the remaining challenges and future plans to continue those measurements.

Research on Interventions for Adolescents with Learning Disabilities: A Meta-Analysis of Outcomes Related to Higher-Order Processing.

Science.gov (United States)

Swanson, H. Lee

2001-01-01

Details meta-analysis of 58 intervention studies related to higher-order processing (i.e., problem solving) for adolescents with learning disabilities. Discusses factors that increased effect sizes: (1) measures of metacognition and text understanding; (2) instruction including advanced organizers, new skills, and extended practice; and (3)…

Research Progress on Fe-based Amorphous Coatings

Directory of Open Access Journals (Sweden)

LIANG Xiu-bing

2017-09-01

Full Text Available The latest research progresses on Fe-based amorphous coatings were reviewed. The typical alloy system and the classification of Fe-based amorphous coatings were clarified. The status, progress and development of the Fe-based amorphous coatings prepared by thermal spray processing and laser cladding process were discussed. The main mechanical properties and potential applications of the Fe-based amorphous coatings were also described. Furthermore, based on the main problems mentioned above, the future development of the Fe-based amorphous coatings was discussed, including the exploitation preparation technologies of high amorphous content of the Fe-based coatings, the development of the low cost and high performance Fe-based coating alloys system, the broadening application of Fe-based amorphous coatings, and so on.

Arguments from Developmental Order.

Science.gov (United States)

Stöckle-Schobel, Richard

2016-01-01

In this article, I investigate a special type of argument regarding the role of development in theorizing about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind - getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories. Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasizing the importance of the early cognitive processes and arguments emphasizing the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive) development, and I will present some topics that also pertain to a full-fledged 'philosophy of development.'

Operon Gene Order Is Optimized for Ordered Protein Complex Assembly

Science.gov (United States)

Wells, Jonathan N.; Bergendahl, L. Therese; Marsh, Joseph A.

2016-01-01

Summary The assembly of heteromeric protein complexes is an inherently stochastic process in which multiple genes are expressed separately into proteins, which must then somehow find each other within the cell. Here, we considered one of the ways by which prokaryotic organisms have attempted to maximize the efficiency of protein complex assembly: the organization of subunit-encoding genes into operons. Using structure-based assembly predictions, we show that operon gene order has been optimized to match the order in which protein subunits assemble. Exceptions to this are almost entirely highly expressed proteins for which assembly is less stochastic and for which precisely ordered translation offers less benefit. Overall, these results show that ordered protein complex assembly pathways are of significant biological importance and represent a major evolutionary constraint on operon gene organization. PMID:26804901

Legal Terms Used in Reception Order and their Relevance to Judicial Process.

Science.gov (United States)

Subramanian, Nakkeerar; Ramanathan, Rajkumar; Kumar, Venkatesh Madhan; Chellappan, Dhanabalan Kalingarayan Palayam; Ramasamy, Jeyaprakash

2016-01-01

Law governs the admission and management of involuntary admissions of mentally ill persons who are admitted under the provisions of the mental health act. The court directs the doctor to take charge of such persons. In the further dealings of such person the medical officer of the psychiatric facility comes across legal terms, which require understanding so that patients could be dealt with properly. Various terms such as accused, under police custody, judicial custody, remand prisoner, or under trial prisoner are used to denote their legal status. It is imperative for the medical officer to understand the nuances in the meanings of these terms. There are many times when the relevant section under which the admission is ordered is not found in the reception order. In these cases the terminology by which the patient is mentioned throws a light on the status of the patient. Towards this aim a study was carried out to assess the awareness and understanding of such terms by the faculty and post- graduates of a tertiary care hospital that deals with the admission and care of such patients. They were administered a questionnaire containing these terms and asked to provide the meaning of these terms. The results showed that nearly half the faculty and students were not having clarity in awareness or understanding of the terms. Hence these terms and their meanings were gleaned from various judgments. The proper meaning of these terms and their use in judicial process and their importance is discussed.

An ongoing process: a qualitative study of how the alcohol-dependent free themselves of addiction through progressive abstinence.

Science.gov (United States)

Yeh, Mei-Yu; Che, Hui-Lian; Wu, Shu-Mei

2009-11-24

Most people being treated for alcoholism are unable to successfully quit drinking within their treatment programs. In few cases do we know the full picture of how abstinence is achieved in Taiwan. We tracked processes of abstinence in alcohol-dependency disorders, based on study evidence and results. This research explores the process of recovery from the viewpoint of the alcohol-dependent. Semi-structured interviews were conducted in two different settings, using purpose sampling, during 2003-2004. The data were analyzed using content analysis. Participants were 32 adults, purposefully selected from an Alcoholics Anonymous group and a psychiatric hospital in North Taiwan. We found that the abstinence process is an ongoing process, in which the alcohol-dependent free themselves of addiction progressively. This process never ends or resolves in complete recovery. We have identified three stages in the struggle against alcoholism: the Indulgence, Ambivalence and Attempt (IAA) cycle, in which the sufferer is trapped in a cycle of attempting to give up and failing; the Turning Point, in which a Personal Nadir is reached, and the Ongoing Process of abstinence, in which a constant effort is made to remain sober through willpower and with the help of support groups. We also discuss Influencing Factors that can derail abstinence attempts, pushing the sufferer back into the IAA cycle. This study provides important points of reference for alcohol and drug service workers and community healthcare professionals in Taiwan, casting light on the abstinence process and providing a basis for intervention or rehabilitation services.

An ongoing process: A qualitative study of how the alcohol-dependent free themselves of addiction through progressive abstinence

Directory of Open Access Journals (Sweden)

Che Hui-Lian

2009-11-01

Full Text Available Abstract Background Most people being treated for alcoholism are unable to successfully quit drinking within their treatment programs. In few cases do we know the full picture of how abstinence is achieved in Taiwan. We tracked processes of abstinence in alcohol-dependency disorders, based on study evidence and results. This research explores the process of recovery from the viewpoint of the alcohol-dependent. Methods Semi-structured interviews were conducted in two different settings, using purpose sampling, during 2003-2004. The data were analyzed using content analysis. Participants were 32 adults, purposefully selected from an Alcoholics Anonymous group and a psychiatric hospital in North Taiwan. Results We found that the abstinence process is an ongoing process, in which the alcohol-dependent free themselves of addiction progressively. This process never ends or resolves in complete recovery. We have identified three stages in the struggle against alcoholism: the Indulgence, Ambivalence and Attempt (IAA cycle, in which the sufferer is trapped in a cycle of attempting to give up and failing; the Turning Point, in which a Personal Nadir is reached, and the Ongoing Process of abstinence, in which a constant effort is made to remain sober through willpower and with the help of support groups. We also discuss Influencing Factors that can derail abstinence attempts, pushing the sufferer back into the IAA cycle. Conclusion This study provides important points of reference for alcohol and drug service workers and community healthcare professionals in Taiwan, casting light on the abstinence process and providing a basis for intervention or rehabilitation services.

Progress of the radioactive waste management at the Dalat Nuclear Research Institute and the role of an IAEA technical co-operation project in this process

International Nuclear Information System (INIS)

Nang, N.T.; Ngoc, O.V.; Nhu Thuy, T.T.; Nghi, D.V.; Thu, N.T.

2002-01-01

At present, the main radioactive waste generator in Vietnam is the Dalat Nuclear Research Institute (DNRI). For safe management of radioactive waste generated from this nuclear center, in 1982 Soviet specialists newly constructed one combined technology system for low level radioactive waste management. The existing system consists of two main parts, a Liquid Radioactive Waste Treatment Station and a Storage/Disposal Facility. The liquid treatment station can in principle meet the needs for this nuclear center but disposal technology and storage/disposal facilities are not good enough both with respect to safety and economy, especially the storage/disposal facility placed in Dalat, the tourist city. In order to help DNRI and Vietnam to solve the radioactive waste management problem, the IAEA Technical Co-operation (TC) project VIE/9/007 was implemented in Vietnam. The facilities and IAEA experts provided under this project gradually help to develop radioactive waste management at DNRI, Vietnam. This paper outlines progress under way in the management of the radioactive waste at the Nuclear Research Institute (NRI), Dalat, Vietnam, and the role of the IAEA Technical Co-operation (TC) project in this process. (author)

77 FR 51693 - Milk in the Mideast Marketing Area; Order Amending the Order

Science.gov (United States)

2012-08-27

... can be supplied without data processing equipment or a trained statistical staff. Thus, the... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1033 [Doc. No. AO-11-0333; AMS-DA-11-0067; DA-11-04] Milk in the Mideast Marketing Area; Order Amending the Order AGENCY...

Workload control and order release : A lean solution for make-to-order companies

NARCIS (Netherlands)

Thurer, M.; Stevenson, M.; Silva, C.; Land, M.J.; Fredendall, L.D.

2012-01-01

Protecting throughput from variance is the key to achieving lean. Workload control (WLC) accomplishes this in complex make-to-order job shops by controlling lead times, capacity, and work-in-process (WIP). However, the concept has been dismissed by many authors who believe its order release

Bioinspired Nanocomposite Hydrogels with Highly Ordered Structures.

Science.gov (United States)

Zhao, Ziguang; Fang, Ruochen; Rong, Qinfeng; Liu, Mingjie

2017-12-01

In the human body, many soft tissues with hierarchically ordered composite structures, such as cartilage, skeletal muscle, the corneas, and blood vessels, exhibit highly anisotropic mechanical strength and functionality to adapt to complex environments. In artificial soft materials, hydrogels are analogous to these biological soft tissues due to their "soft and wet" properties, their biocompatibility, and their elastic performance. However, conventional hydrogel materials with unordered homogeneous structures inevitably lack high mechanical properties and anisotropic functional performances; thus, their further application is limited. Inspired by biological soft tissues with well-ordered structures, researchers have increasingly investigated highly ordered nanocomposite hydrogels as functional biological engineering soft materials with unique mechanical, optical, and biological properties. These hydrogels incorporate long-range ordered nanocomposite structures within hydrogel network matrixes. Here, the critical design criteria and the state-of-the-art fabrication strategies of nanocomposite hydrogels with highly ordered structures are systemically reviewed. Then, recent progress in applications in the fields of soft actuators, tissue engineering, and sensors is highlighted. The future development and prospective application of highly ordered nanocomposite hydrogels are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Identifying Armed Respondents to Domestic Violence Restraining Orders and Recovering Their Firearms: Process Evaluation of an Initiative in California

Science.gov (United States)

Frattaroli, Shannon; Claire, Barbara E.; Vittes, Katherine A.; Webster, Daniel W.

2014-01-01

Objectives. We evaluated a law enforcement initiative to screen respondents to domestic violence restraining orders for firearm ownership or possession and recover their firearms. Methods. The initiative was implemented in San Mateo and Butte counties in California from 2007 through 2010. We used descriptive methods to evaluate the screening process and recovery effort in each county, relying on records for individual cases. Results. Screening relied on an archive of firearm transactions, court records, and petitioner interviews; no single source was adequate. Screening linked 525 respondents (17.7%) in San Mateo County to firearms; 405 firearms were recovered from 119 (22.7%) of them. In Butte County, 88 (31.1%) respondents were linked to firearms; 260 firearms were recovered from 45 (51.1%) of them. Nonrecovery occurred most often when orders were never served or respondents denied having firearms. There were no reports of serious violence or injury. Conclusions. Recovering firearms from persons subject to domestic violence restraining orders is possible. We have identified design and implementation changes that may improve the screening process and the yield from recovery efforts. Larger implementation trials are needed. PMID:24328660

Improvements to the DOE low-level waste regulatory structure and process under recommendation 94-2 - progress to date

International Nuclear Information System (INIS)

Regnier, E.

1995-01-01

Among the concerns expressed by the Defense Nuclear Facility Safety Board (DNFSB) in its Recommendation 94-2 was the lack of a clearly defined and effective internal Department of Energy (DOE) regulatory oversight and enforcement process for ensuring that low-level radioactive waste management health, safety, and environmental requirements are met. Therefore, part of the response to the DNFSB concern is a task to clarify and strengthen the low-level waste management regulatory structure. This task is being conducted in two steps. First, consistent with the requirements of the current DOE waste management order and within the framework of the current organizational structure, interim clarification of a review process and the associated organizational responsibilities has been issued. Second, in coordination with the revision of the waste management order and consistent with the organizational responsibilities resulting from the strategic alignment of DOE, a rigorous, more independent regulatory oversight structure will be developed

Improvements to the DOE low-level waste regulatory structure and process under recommendation 94-2 - progress to date

Energy Technology Data Exchange (ETDEWEB)

Regnier, E.

1995-12-31

Among the concerns expressed by the Defense Nuclear Facility Safety Board (DNFSB) in its Recommendation 94-2 was the lack of a clearly defined and effective internal Department of Energy (DOE) regulatory oversight and enforcement process for ensuring that low-level radioactive waste management health, safety, and environmental requirements are met. Therefore, part of the response to the DNFSB concern is a task to clarify and strengthen the low-level waste management regulatory structure. This task is being conducted in two steps. First, consistent with the requirements of the current DOE waste management order and within the framework of the current organizational structure, interim clarification of a review process and the associated organizational responsibilities has been issued. Second, in coordination with the revision of the waste management order and consistent with the organizational responsibilities resulting from the strategic alignment of DOE, a rigorous, more independent regulatory oversight structure will be developed.

Use of ergonomic principles in manual order picking systems

Directory of Open Access Journals (Sweden)

Labus Nina

2018-02-01

Full Text Available Successful companies are continually striving to streamline costs and optimize processes, enabling them to grow progress, develop and ensure competitiveness on the market. A large part of the costs arises in warehouses, where up to 55% of total costs are generated by order-picking, which makes it important and interesting in terms of research. The paper explores “picker to part” order-picking concept, which enables flexible work and is the optimal choice for most companies. The concept is associated with a high level of work-related injuries and work-related illnesses. Work requires physical efforts resulting from handling heavy goods, performing repetitive movements and using manipulative means. Human as the main actor of the concept affects the costs caused by picking and the quality of work done, which depends on technological support, physically and psychologically capable and motivated people. Due to the high costs of service, the focus on time planning and productivity increases. Contrary, the lack of attention is paid to the working conditions and the health status of the pickers. To overcome this gab, a review of scientific and professional literature on ergonomic principles in picking concept »picker to part« was carried out, followed by a quantitative survey of ergonomic properties in warehousing activities. Results revealed that more than 60% of the surveyed order-pickers associate problems with health with the characteristics of work, about 24% of them associate health problems with the use of a particular means of transport, and all agree that provided measures to reduce physical effort and greater support of technologies influence on increased speed of work and better health status of order-pickers.

Adaptation of Enterococcus faecalis to daptomycin reveals an ordered progression to resistance.

Science.gov (United States)

Miller, Corwin; Kong, Jiayi; Tran, Truc T; Arias, Cesar A; Saxer, Gerda; Shamoo, Yousif

2013-11-01

With increasing numbers of hospital-acquired antibiotic resistant infections each year and staggering health care costs, there is a clear need for new antimicrobial agents, as well as novel strategies to extend their clinical efficacy. While genomic studies have provided a wealth of information about the alleles associated with adaptation to antibiotics, they do not provide essential information about the relative importance of genomic changes, their order of appearance, or potential epistatic relationships between adaptive changes. Here we used quantitative experimental evolution of a single polymorphic population in continuous culture with whole-genome sequencing and allelic frequency measurements to study daptomycin (DAP) resistance in the vancomycin-resistant clinical pathogen Enterococcus faecalis S613. Importantly, we sustained both planktonic and nonplanktonic (i.e., biofilm) populations in coculture as the concentration of antibiotic was raised, facilitating the development of more ecological complexity than is typically observed in laboratory evolution. Quantitative experimental evolution revealed a clear order and hierarchy of genetic changes leading to resistance, the signaling and metabolic pathways responsible, and the relative importance of these mutations to the evolution of DAP resistance. Despite the relative simplicity of this ex vivo approach compared to the ecological complexity of the human body, we showed that experimental evolution allows for rapid identification of clinically relevant adaptive molecular pathways and new targets for drug design in pathogens.

Method of optimization of the natural gas refining process

Energy Technology Data Exchange (ETDEWEB)

Sadykh-Zade, E.S.; Bagirov, A.A.; Mardakhayev, I.M.; Razamat, M.S.; Tagiyev, V.G.

1980-01-01

The SATUM (automatic control system of technical operations) system introduced at the Shatlyk field should assure good quality of gas refining. In order to optimize the natural gas refining processes and experimental-analytical method is used in compiling the mathematical descriptions. The program, compiled in Fortran language, in addition to parameters of optimal conditions gives information on the yield of concentrate and water, concentration and consumption of DEG, composition and characteristics of the gas and condensate. The algorithm for calculating optimum engineering conditions of gas refining is proposed to be used in ''advice'' mode, and also for monitoring progress of the gas refining process.

Identification of low order models for large scale processes

NARCIS (Netherlands)

Wattamwar, S.K.

2010-01-01

Many industrial chemical processes are complex, multi-phase and large scale in nature. These processes are characterized by various nonlinear physiochemical effects and fluid flows. Such processes often show coexistence of fast and slow dynamics during their time evolutions. The increasing demand

Order-disorder phenomenon in lead scandium tantalate

International Nuclear Information System (INIS)

Wang, H.C.; Schulze, W.A.

1990-01-01

Lead scandium tatalate (PST) is a ferroelectric relaxor with the perovskite structure of A(B'B double-prime)O 3 . By suitable heat treatment, the B-site cations can be brought from a structurally disordered state into various degree of ordering. The degree of ordering is strongly affected by the amount of vacancies present in the materials. To suppress PbO loss during the sintering or annealing process, a PbO-rich atmosphere is supplied by materials having high PbO vapor pressure, such as PbZrO 3 . For PST ceramics with nearly zero weight loss, very long annealing times and higher annealing temperatures are required for ordering. The higher PbO-loss materials are found to be easily ordered. The introduction of a reducing atmosphere during annealing enhances the ordering process. The ordering process is characterized quantitatively by X-ray diffraction and qualitatively by Raman spectroscopy

Progress in the methods of steel production

Energy Technology Data Exchange (ETDEWEB)

Onodera, S; Suzuki, K

1979-07-01

The steel making and ingot making processes have made a great progress in the past two decades, which has been one of the direct supports for developing those megalo-technologies as in iron and steel making, petrochemical, fossil and nuclear power generation, and other industries. In discussing steel quality, large or small, everything is to the ingot, and in order to reduce miscellaneous imperfections in steel ingots, for largest ones in particular, tremendous efforts have been made so far. In addition to the improvements in conventional ingot making method, a number of innovational techniques were developed such as ESR, PESC, ABR, MHKW, BEST, etc. with some results in respective fields of application. Nevertheless, for largest sizes of ingot from 250 to 500 tons, the conventional method was successful enough. The history of conventional method is summarized for the past quarter century. The improved quality of large ingots could bring some more merits in the final forged products, which are: (1) improved isotropy of mechanial properties; and (2) sufficnet effect of forging with much less forging ratio.

Progress in the methods of steel-production

International Nuclear Information System (INIS)

Onodera, S.

1979-01-01

The steel making and ingot making processes have made a great progress in the past two decades, which has been one of the direct supports for developing those megalo-technologies as in iron and steel making, petrochemical, fossil and nuclear power generation, and other industries. In discussing steel quality, large or small, everything is to the ingot, and in order to reduce miscellaneous imperfections in steel ingots, for largest ones in particular, tremendous efforts have been made so far. In addition to the improvements in conventional ingot making method, a number of innovational techniques were developed such as ESR, PESC, ABR, MHKW, BEST, etc. with some results in respective fields of application. Nevertheless, for largest sizes of ingot from 250 to 500 tons, the conventional method was successful enough. The history of conventional method is summarized for the past quarter century. The improved quality of large ingots could bring some more merits in the final forged products, which are: 1) Improved isotropy of mechanical properties, 2) sufficient effect of forging with much less forging ratio. (orig./HJ) [de

Investigation of Effectiveness of Order Review and Release Models in Make to Order Supply Chain

Directory of Open Access Journals (Sweden)

Kundu Kaustav

2016-01-01

Full Text Available Nowadays customisation becomes more common due to vast requirement from the customers for which industries are trying to use make-to-order (MTO strategy. Due to high variation in the process, workload control models are extensively used for jobshop companies which usually adapt MTO strategy. Some authors tried to implement workload control models, order review and release systems, in non-repetitive manufacturing companies, where there is a dominant flow in production. Those models are better in shop floor but their performances are never been investigated in high variation situations like MTO supply chain. This paper starts with the introduction of particular issues in MTO companies and a general overview of order review and release systems widely used in the industries. Two order review and release systems, the Limited and Balanced models, particularly suitable for flow shop system are applied to MTO supply chain, where the processing times are difficult to estimate due to high variation. Simulation results show that the Balanced model performs much better than the Limited model if the processing times can be estimated preciously.

Disruption of Relational Processing Underlies Poor Memory for Order

Science.gov (United States)

Jonker, Tanya R.; MacLeod, Colin M.

2015-01-01

McDaniel and Bugg (2008) proposed that relatively uncommon stimuli and encoding tasks encourage elaborative encoding of individual items (item-specific processing), whereas relatively typical or common encoding tasks encourage encoding of associations among list items (relational processing). It is this relational processing that is thought to…

Arguments from Developmental Order

Directory of Open Access Journals (Sweden)

Richard eStöckle-Schobel

2016-05-01

Full Text Available In this article, I investigate a special type of argument regarding the role of development in theorising about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind – getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories.Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasising the importance of the early cognitive processes and arguments emphasising the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive development, and I will present some topics that also pertain to a full-fledged ‘philosophy of development’.

Mapping of Students’ Learning Progression Based on Mental Model in Magnetic Induction Concepts

Science.gov (United States)

Hamid, R.; Pabunga, D. B.

2017-09-01

The progress of student learning in a learning process has not been fully optimally observed by the teacher. The concept being taught is judged only at the end of learning as a product of thinking, and does not assess the mental processes that occur in students’ thinking. Facilitating students’ thinking through new phenomena can reveal students’ variation in thinking as a mental model of a concept, so that students who are assimilative and or accommodative can be identified in achieving their equilibrium of thought as well as an indicator of progressiveness in the students’ thinking stages. This research data is obtained from the written documents and interviews of students who were learned about the concept of magnetic induction through Constructivist Teaching Sequences (CTS) models. The results of this study indicate that facilitating the students’ thinking processes on the concept of magnetic induction contributes to increasing the number of students thinking within the "progressive change" category, and it can be said that the progress of student learning is more progressive after their mental models were facilitated through a new phenomena by teacher.

Commercial LFCM vitrification technology. Quarterly progress report, October-December 1984

Energy Technology Data Exchange (ETDEWEB)

Burkholder, H.C.; Jarrett, J.H. (comps.)

1985-07-01

This report is the first in a series of quarterly reports compiled by the Nuclear Waste Treatment Program Office at Pacific Northwest Laboratory to document progress on commercial liquid-fed ceramic melter (LFCM) vitrification technology. Progress in the following technical subject areas during the first quarter of FY 1985 is discussed: pretreatment systems, melting process chemistry, glass development and characterization, feed preparation and transfer systems, melter systems, canister filling and handling systems, off-gas systems, process/product modeling and control, and supporting studies. 33 figs., 12 tabs.

[Progressive damage monitoring of corrugated composite skins by the FBG spectral characteristics].

Science.gov (United States)

Zhang, Yong; Wang, Bang-Feng; Lu, Ji-Yun; Gu, Li-Li; Su, Yong-Gang

2014-03-01

In the present paper, a method of monitoring progressive damage of composite structures by non-uniform fiber Bragg grating (FBG) reflection spectrum is proposed. Due to the finite element analysis of corrugated composite skins specimens, the failure process under tensile load and corresponding critical failure loads of corrugated composite skin was predicated. Then, the non-uniform reflection spectrum of FBG sensor could be reconstructed and the corresponding relationship between layer failure order sequence of corrugated composite skin and FBG sensor reflection spectrums was acquired. A monitoring system based on FBG non-uniform reflection spectrum, which can be used to monitor progressive damage of corrugated composite skins, was built. The corrugated composite skins were stretched under this FBG non-uniform reflection spectrum monitoring system. The results indicate that real-time spectrums acquired by FBG non-uniform reflection spectrum monitoring system show the same trend with the reconstruction reflection spectrums. The maximum error between the corresponding failure and the predictive value is 8.6%, which proves the feasibility of using FBG sensor to monitor progressive damage of corrugated composite skin. In this method, the real-time changes in the FBG non-uniform reflection spectrum within the scope of failure were acquired through the way of monitoring and predicating, and at the same time, the progressive damage extent and layer failure sequence of corru- gated composite skin was estimated, and without destroying the structure of the specimen, the method is easy and simple to operate. The measurement and transmission section of the system are completely composed of optical fiber, which provides new ideas and experimental reference for the field of dynamic monitoring of smart skin.

Phase transition type change in order-order and order-disorder transformations of LaH2+c-like superstoichiometric dihydrides

International Nuclear Information System (INIS)

Ratishvili, I.G.

1999-01-01

Phase transformations in metal-hydrogen systems associated with the ordering processes in the subsystem of interstitial hydrogen atoms are considered. It is shown that in a particular class of superstoichiometric rare-earth dihydrides, where the ordering subsystem is characterized by two long-range-order parameters η 1 , η 2 and the energy parameter p 0 (1) (p) ≤ c ≤ c 0 (2) (p), it becomes discontinuous outside of this region. Dependence of critical concentrations c 0 (1) and c 0 (2) upon the energy parameter p is deduced. It is shown, as well, that there exists a second sequence of critical concentrations, c 1 (1) (p) and c 1 (2) (p), denoting the boundaries between the regions of continuous and discontinuous order-disorder transformations. (orig.)

Scientific progress report 1/1975

International Nuclear Information System (INIS)

1975-01-01

Review articles report on the progress in research and development in the fields theoretical physics, nuclear reactions, nuclear moments and internal fields, nuclear collision processes, VICKSI. The publications of the HMI department nuclear and radiation physics in the form of scientific publications, theses, conference papers, colloquium papers, as well as the members are listed. (HK) [de

Tracking the follow-up of work in progress papers.

Science.gov (United States)

Mubin, Omar; Arsalan, Mudassar; Al Mahmud, Abdullah

2018-01-01

Academic conferences offer numerous submission tracks to support the inclusion of a variety of researchers and topics. Work in progress papers are one such submission type where authors present preliminary results in a poster session. They have recently gained popularity in the area of Human Computer Interaction (HCI) as a relatively easier pathway to attending the conference due to their higher acceptance rate as compared to the main tracks. However, it is not clear if these work in progress papers are further extended or transitioned into more complete and thorough full papers or are simply one-off pieces of research. In order to answer this we explore self-citation patterns of four work in progress editions in two popular HCI conferences (CHI2010, CHI2011, HRI2010 and HRI2011). Our results show that almost 50% of the work in progress papers do not have any self-citations and approximately only half of the self-citations can be considered as true extensions of the original work in progress paper. Specific conferences dominate as the preferred venue where extensions of these work in progress papers are published. Furthermore, the rate of self-citations peaks in the immediate year after publication and gradually tails off. By tracing author publication records, we also delve into possible reasons of work in progress papers not being cited in follow up publications. In conclusion, we speculate on the main trends observed and what they may mean looking ahead for the work in progress track of premier HCI conferences.

Progress risk assessment of oral premalignant lesions with saliva miRNA analysis

International Nuclear Information System (INIS)

Yang, Ya; Li, Yue-xiu; Yang, Xi; Jiang, Long; Zhou, Zuo-jun; Zhu, Ya-qin

2013-01-01

Oral cancer develops through multi-stages: from normal to mild (low grade) dysplasia (LGD), moderate dysplasia, and severe (high grade) dysplasia (HGD), to carcinoma in situ (CIS) and finally invasive oral squamous cell carcinomas (OSCC). Clinical and histological assessments are not reliable in predicting which precursor lesions will progress. The aim of this study was to assess the potential of a noninvasive approach to assess progress risk of oral precancerous lesions. We first used microRNA microarray to profile progressing LGD oral premaligant lesions (OPLs) from non-progressing LGD OPLs in order to explore the possible microRNAs deregulated in low grade OPLs which later progressed to HGD or OSCC. We then used RT-qPCR to detect miRNA targets from the microarray results in saliva samples of these patients. We identified a specific miRNA signature that is aberrantly expressed in progressing oral LGD leukoplakias. Similar expression patterns were detected in saliva samples from these patients. These results show promise for using saliva miRNA signature for monitoring of cancer precursor lesions and early detection of disease progression

Age gene expression and coexpression progressive signatures in peripheral blood leukocytes.

Science.gov (United States)

Irizar, Haritz; Goñi, Joaquín; Alzualde, Ainhoa; Castillo-Triviño, Tamara; Olascoaga, Javier; Lopez de Munain, Adolfo; Otaegui, David

2015-12-01

Both cellular senescence and organismic aging are known to be dynamic processes that start early in life and progress constantly during the whole life of the individual. In this work, with the objective of identifying signatures of age-related progressive change at the transcriptomic level, we have performed a whole-genome gene expression analysis of peripheral blood leukocytes in a group of healthy individuals with ages ranging from 14 to 93 years. A set of genes with progressively changing gene expression (either increase or decrease with age) has been identified and contextualized in a coexpression network. A modularity analysis has been performed on this network and biological-term and pathway enrichment analyses have been used for biological interpretation of each module. In summary, the results of the present work reveal the existence of a transcriptomic component that shows progressive expression changes associated to age in peripheral blood leukocytes, highlighting both the dynamic nature of the process and the need to complement young vs. elder studies with longitudinal studies that include middle aged individuals. From the transcriptional point of view, immunosenescence seems to be occurring from a relatively early age, at least from the late 20s/early 30s, and the 49-56 year old age-range appears to be critical. In general, the genes that, according to our results, show progressive expression changes with aging are involved in pathogenic/cellular processes that have classically been linked to aging in humans: cancer, immune processes and cellular growth vs. maintenance. Copyright © 2015 Elsevier Inc. All rights reserved.

A Comparison of Mother-Tongue Curricula of Successful Countries in PISA and Turkey by Higher-Order Thinking Processes

Science.gov (United States)

Cer, Erkan

2018-01-01

Purpose: The purpose of the current study is to reveal general qualities of the objectives in the mother-tongue curricula of Hong Kong and Shanghai-China, South Korea, Singapore, and Turkey in terms of higher-order thinking processes specified by PISA tests. Research Methods: In this study, the researcher used a qualitative research design.…

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

Progressive multiple sequence alignments from triplets

Directory of Open Access Journals (Sweden)

Stadler Peter F

2007-07-01

Full Text Available Abstract Background The quality of progressive sequence alignments strongly depends on the accuracy of the individual pairwise alignment steps since gaps that are introduced at one step cannot be removed at later aggregation steps. Adjacent insertions and deletions necessarily appear in arbitrary order in pairwise alignments and hence form an unavoidable source of errors. Research Here we present a modified variant of progressive sequence alignments that addresses both issues. Instead of pairwise alignments we use exact dynamic programming to align sequence or profile triples. This avoids a large fractions of the ambiguities arising in pairwise alignments. In the subsequent aggregation steps we follow the logic of the Neighbor-Net algorithm, which constructs a phylogenetic network by step-wisely replacing triples by pairs instead of combining pairs to singletons. To this end the three-way alignments are subdivided into two partial alignments, at which stage all-gap columns are naturally removed. This alleviates the "once a gap, always a gap" problem of progressive alignment procedures. Conclusion The three-way Neighbor-Net based alignment program aln3nn is shown to compare favorably on both protein sequences and nucleic acids sequences to other progressive alignment tools. In the latter case one easily can include scoring terms that consider secondary structure features. Overall, the quality of resulting alignments in general exceeds that of clustalw or other multiple alignments tools even though our software does not included heuristics for context dependent (mismatch scores.

Applied Behavior Analysis Is a Science And, Therefore, Progressive

Science.gov (United States)

Leaf, Justin B.; Leaf, Ronald; McEachin, John; Taubman, Mitchell; Ala'i-Rosales, Shahla; Ross, Robert K.; Smith, Tristram; Weiss, Mary Jane

2016-01-01

Applied behavior analysis (ABA) is a science and, therefore, involves progressive approaches and outcomes. In this commentary we argue that the spirit and the method of science should be maintained in order to avoid reductionist procedures, stifled innovation, and rote, unresponsive protocols that become increasingly removed from meaningful…

Local-order metric for condensed-phase environments

Science.gov (United States)

Martelli, Fausto; Ko, Hsin-Yu; Oǧuz, Erdal C.; Car, Roberto

2018-02-01

We introduce a local order metric (LOM) that measures the degree of order in the neighborhood of an atomic or molecular site in a condensed medium. The LOM maximizes the overlap between the spatial distribution of sites belonging to that neighborhood and the corresponding distribution in a suitable reference system. The LOM takes a value tending to zero for completely disordered environments and tending to one for environments that perfectly match the reference. The site-averaged LOM and its standard deviation define two scalar order parameters, S and δ S , that characterize with excellent resolution crystals, liquids, and amorphous materials. We show with molecular dynamics simulations that S , δ S , and the LOM provide very insightful information in the study of structural transformations, such as those occurring when ice spontaneously nucleates from supercooled water or when a supercooled water sample becomes amorphous upon progressive cooling.

Using Statistical Process Control to Enhance Student Progression

Science.gov (United States)

Hanna, Mark D.; Raichura, Nilesh; Bernardes, Ednilson

2012-01-01

Public interest in educational outcomes has markedly increased in the most recent decade; however, quality management and statistical process control have not deeply penetrated the management of academic institutions. This paper presents results of an attempt to use Statistical Process Control (SPC) to identify a key impediment to continuous…

AECL's progress in DUPIC fuel development

International Nuclear Information System (INIS)

Sullivan, J.D.; Ryz, M.A.; Lee, J.W.

1997-01-01

Previous papers described progress in choosing a fabrication route for the DUPIC (Direct Use of Spent PWR Fuel in CANDU) fuel cycle [1], details of the OREOX (Oxidation Reduction of Oxide fuel) process, and preliminary results of out-cell and small-scale in-cell experiments [2]. AECL's project to develop the DUPIC fuel cycle has now progressed to the stage of fabricating DUPIC fuel elements for irradiation testing in a research reactor. Because of the high radiation fields around the spent PWR fuel, all work is being done in hot cells. The equipment used for fabrication of the DUPIC fuel elements is described in this paper. The commissioning, in-cell installation and current status of the fabrication process are also described and plans for the completion of this phase of the DUPIC project are outlined. The goal of this phase of the project is demonstration of the technical feasibility of the DUPIC fuel cycle. (author)

Dogs cannot bark: event-related brain responses to true and false negated statements as indicators of higher-order conscious processing.

Science.gov (United States)

Herbert, Cornelia; Kübler, Andrea

2011-01-01

The present study investigated event-related brain potentials elicited by true and false negated statements to evaluate if discrimination of the truth value of negated information relies on conscious processing and requires higher-order cognitive processing in healthy subjects across different levels of stimulus complexity. The stimulus material consisted of true and false negated sentences (sentence level) and prime-target expressions (word level). Stimuli were presented acoustically and no overt behavioral response of the participants was required. Event-related brain potentials to target words preceded by true and false negated expressions were analyzed both within group and at the single subject level. Across the different processing conditions (word pairs and sentences), target words elicited a frontal negativity and a late positivity in the time window from 600-1000 msec post target word onset. Amplitudes of both brain potentials varied as a function of the truth value of the negated expressions. Results were confirmed at the single-subject level. In sum, our results support recent suggestions according to which evaluation of the truth value of a negated expression is a time- and cognitively demanding process that cannot be solved automatically, and thus requires conscious processing. Our paradigm provides insight into higher-order processing related to language comprehension and reasoning in healthy subjects. Future studies are needed to evaluate if our paradigm also proves sensitive for the detection of consciousness in non-responsive patients.

Dogs cannot bark: event-related brain responses to true and false negated statements as indicators of higher-order conscious processing.

Directory of Open Access Journals (Sweden)

Cornelia Herbert

Full Text Available The present study investigated event-related brain potentials elicited by true and false negated statements to evaluate if discrimination of the truth value of negated information relies on conscious processing and requires higher-order cognitive processing in healthy subjects across different levels of stimulus complexity. The stimulus material consisted of true and false negated sentences (sentence level and prime-target expressions (word level. Stimuli were presented acoustically and no overt behavioral response of the participants was required. Event-related brain potentials to target words preceded by true and false negated expressions were analyzed both within group and at the single subject level. Across the different processing conditions (word pairs and sentences, target words elicited a frontal negativity and a late positivity in the time window from 600-1000 msec post target word onset. Amplitudes of both brain potentials varied as a function of the truth value of the negated expressions. Results were confirmed at the single-subject level. In sum, our results support recent suggestions according to which evaluation of the truth value of a negated expression is a time- and cognitively demanding process that cannot be solved automatically, and thus requires conscious processing. Our paradigm provides insight into higher-order processing related to language comprehension and reasoning in healthy subjects. Future studies are needed to evaluate if our paradigm also proves sensitive for the detection of consciousness in non-responsive patients.

FY09 PROGRESS: MULTI-ISOTOPE PROCESS (MIP) MONITOR

International Nuclear Information System (INIS)

Schwantes, Jon M.; Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Laspe, Amy R.; Ward, Rebecca M.

2009-01-01

Model and experimental estimates of the Multi-Isotope Process Monitor performance for determining burnup after dissolution and acid concentration during solvent extraction steps during reprocessing of spent nuclear fuel are presented. Modern industrial reprocessing techniques, including the PUREX and UREX+ family of separations technologies, are based on solvent extraction between organic and aqueous phases. In these bi-phase systems, product (actinide) and contaminant (fission and activation products) elements are preferentially driven (thermodynamically) to opposite phases, with small amounts of each remaining in the other phase. The distribution of each element, between the organic and aqueous phases, is determined by major process variables such as acid concentration, organic ligand concentration, reduction potential, and temperature. Hence, for consistent performance of the separation process, the distribution of each element between the organic and aqueous phases should be relatively constant. During 'normal' operations the pattern of elements distributing into the product and waste streams at each segment of the facility should be reproducible, resulting in a statistically significant signature of the nominal process conditions. Under 'abnormal' conditions, such as those expected under some protracted diversion scenarios, patterns of elements within the various streams would be expected to change measurably. The MIP monitoring approach utilizes changes in the concentrations of gamma-emitting elements as evidence of changes to the process chemistry. It exploits a suite of gamma emitting isotopes to track multiple chemical species and behaviors simultaneously, thus encompassing a large array of elements that are affected by chemical and physical changes. In-process surveillance by the MIP monitor is accomplished by coupling the gamma spectrometry of the streams with multivariate techniques, such as Principal Component Analysis (PCA). PCA is a chemometrics tool

Targeting the extracellular matrix to disrupt cancer progression

Directory of Open Access Journals (Sweden)

Freja Albjerg Venning

2015-10-01

Full Text Available Metastatic complications are responsible for more than 90% of cancer related deaths. The progression from an isolated tumor to disseminated metastatic disease is a multi-step process, with each step involving intricate cross-talk between the cancer cells and their non-cellular surroundings, the extracellular matrix (ECM. Many ECM proteins are significantly de-regulated during the progression of cancer, causing both biochemical and biomechanical changes that together promote the metastatic cascade. In this review, the influence of several ECM proteins on these multiple steps of cancer spread is summarized. In addition, we highlight the promising (pre-clinical data showing benefits of targeting these ECM macromolecules to prevent cancer progression.

Linking Government to Academic Research: Lessons from the American Progressive Era

Directory of Open Access Journals (Sweden)

Valentin Filip

2015-05-01

Full Text Available This paper intends to explore why and how the U.S. government involved academic scholars in the policy-making process during the Progressive Era, with a focus on President Woodrow Wilson‘s formation and use of the Inquiry. It further attempts to draw upon the lessons learned from this case study in history in order to stimulate new thinking with regard to the interest of the governmental decision-makers in exploiting academic potential. The paper rests mainly on the research dedicated to Progressivism and Wilsonianism and it consists of an analysis based on the literature review and the case study of The Inquiry. The conclusions highlight the impact that the intellectual potential from within universities and research centres might have in informing policies, revealing alternative tracks and finally supporting the process as a whole. Thus, the paper aims to offer ―food for thought‖ for further debates, raise the awareness on the issue of benefiting from a stronger and deeper government-academia relationship and nurture the mutual interest for partnership and even possible integration.

A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

DEFF Research Database (Denmark)

Mears, Lisa; Stocks, Stuart M.; Albaek, Mads O.

2017-01-01

A novel model-based control strategy has been developed for filamentous fungal fed-batch fermentation processes. The system of interest is a pilot scale (550 L) filamentous fungus process operating at Novozymes A/S. In such processes, it is desirable to maximize the total product achieved...... is recursively updated using on-line measurements. The model was applied in order to predict the current system states, including the biomass concentration, and to simulate the expected future trajectory of the system until a specified end time. In this way, the desired feed rate is updated along the progress...

Agnosia for accents in primary progressive aphasia☆

Science.gov (United States)

Fletcher, Phillip D.; Downey, Laura E.; Agustus, Jennifer L.; Hailstone, Julia C.; Tyndall, Marina H.; Cifelli, Alberto; Schott, Jonathan M.; Warrington, Elizabeth K.; Warren, Jason D.

2013-01-01

As an example of complex auditory signal processing, the analysis of accented speech is potentially vulnerable in the progressive aphasias. However, the brain basis of accent processing and the effects of neurodegenerative disease on this processing are not well understood. Here we undertook a detailed neuropsychological study of a patient, AA with progressive nonfluent aphasia, in whom agnosia for accents was a prominent clinical feature. We designed a battery to assess AA's ability to process accents in relation to other complex auditory signals. AA's performance was compared with a cohort of 12 healthy age and gender matched control participants and with a second patient, PA, who had semantic dementia with phonagnosia and prosopagnosia but no reported difficulties with accent processing. Relative to healthy controls, the patients showed distinct profiles of accent agnosia. AA showed markedly impaired ability to distinguish change in an individual's accent despite being able to discriminate phonemes and voices (apperceptive accent agnosia); and in addition, a severe deficit of accent identification. In contrast, PA was able to perceive changes in accents, phonemes and voices normally, but showed a relatively mild deficit of accent identification (associative accent agnosia). Both patients showed deficits of voice and environmental sound identification, however PA showed an additional deficit of face identification whereas AA was able to identify (though not name) faces normally. These profiles suggest that AA has conjoint (or interacting) deficits involving both apperceptive and semantic processing of accents, while PA has a primary semantic (associative) deficit affecting accents along with other kinds of auditory objects and extending beyond the auditory modality. Brain MRI revealed left peri-Sylvian atrophy in case AA and relatively focal asymmetric (predominantly right sided) temporal lobe atrophy in case PA. These cases provide further evidence for the

Agnosia for accents in primary progressive aphasia.

Science.gov (United States)

Fletcher, Phillip D; Downey, Laura E; Agustus, Jennifer L; Hailstone, Julia C; Tyndall, Marina H; Cifelli, Alberto; Schott, Jonathan M; Warrington, Elizabeth K; Warren, Jason D

2013-08-01

As an example of complex auditory signal processing, the analysis of accented speech is potentially vulnerable in the progressive aphasias. However, the brain basis of accent processing and the effects of neurodegenerative disease on this processing are not well understood. Here we undertook a detailed neuropsychological study of a patient, AA with progressive nonfluent aphasia, in whom agnosia for accents was a prominent clinical feature. We designed a battery to assess AA's ability to process accents in relation to other complex auditory signals. AA's performance was compared with a cohort of 12 healthy age and gender matched control participants and with a second patient, PA, who had semantic dementia with phonagnosia and prosopagnosia but no reported difficulties with accent processing. Relative to healthy controls, the patients showed distinct profiles of accent agnosia. AA showed markedly impaired ability to distinguish change in an individual's accent despite being able to discriminate phonemes and voices (apperceptive accent agnosia); and in addition, a severe deficit of accent identification. In contrast, PA was able to perceive changes in accents, phonemes and voices normally, but showed a relatively mild deficit of accent identification (associative accent agnosia). Both patients showed deficits of voice and environmental sound identification, however PA showed an additional deficit of face identification whereas AA was able to identify (though not name) faces normally. These profiles suggest that AA has conjoint (or interacting) deficits involving both apperceptive and semantic processing of accents, while PA has a primary semantic (associative) deficit affecting accents along with other kinds of auditory objects and extending beyond the auditory modality. Brain MRI revealed left peri-Sylvian atrophy in case AA and relatively focal asymmetric (predominantly right sided) temporal lobe atrophy in case PA. These cases provide further evidence for the

Metal finishing and vacuum processes groups, Materials Fabrication Division progress report, March-May 1984

International Nuclear Information System (INIS)

Dini, J.W.; Romo, J.G.; Jones, L.M.

1984-01-01

Progress is reported in fabrication and coating activities being conducted for the weapons program, nuclear test program, nuclear design program, magnetic fusion program, and miscellaneous applications

Trends in business process analysis: from verification to process mining

NARCIS (Netherlands)

Aalst, van der W.M.P.; Cardoso, J.; Cordeiro, J.; Filipe, J.

2007-01-01

Business process analysis ranges from model verification at design-time to the monitoring of processes at runtime. Much progress has been achieved in process verification. Today we are able to verify the entire reference model of SAP without any problems. Moreover, more and more processes leave

Progress in nanoscale dry processes for fabrication of high-aspect-ratio features: How can we control critical dimension uniformity at the bottom?

Science.gov (United States)

Ishikawa, Kenji; Karahashi, Kazuhiro; Ishijima, Tatsuo; Cho, Sung Il; Elliott, Simon; Hausmann, Dennis; Mocuta, Dan; Wilson, Aaron; Kinoshita, Keizo

2018-06-01

In this review, we discuss the progress of emerging dry processes for nanoscale fabrication of high-aspect-ratio features, including emerging design technology for manufacturability. Experts in the fields of plasma processing have contributed to addressing the increasingly challenging demands of nanoscale deposition and etching technologies for high-aspect-ratio features. The discussion of our atomic-scale understanding of physicochemical reactions involving ion bombardment and neutral transport presents the major challenges shared across the plasma science and technology community. Focus is placed on advances in fabrication technology that control surface reactions on three-dimensional features, as well as state-of-the-art techniques used in semiconductor manufacturing with a brief summary of future challenges.

Progress in Titanium Metal Powder Injection Molding

Directory of Open Access Journals (Sweden)

Randall M. German

2013-08-01

Full Text Available Metal powder injection molding is a shaping technology that has achieved solid scientific underpinnings. It is from this science base that recent progress has occurred in titanium powder injection molding. Much of the progress awaited development of the required particles with specific characteristics of particle size, particle shape, and purity. The production of titanium components by injection molding is stabilized by a good understanding of how each process variable impacts density and impurity level. As summarized here, recent research has isolated the four critical success factors in titanium metal powder injection molding (Ti-MIM that must be simultaneously satisfied—density, purity, alloying, and microstructure. The critical role of density and impurities, and the inability to remove impurities with sintering, compels attention to starting Ti-MIM with high quality alloy powders. This article addresses the four critical success factors to rationalize Ti-MIM processing conditions to the requirements for demanding applications in aerospace and medical fields. Based on extensive research, a baseline process is identified and reported here with attention to linking mechanical properties to the four critical success factors.

Supplementary Material for: High-Order Composite Likelihood Inference for Max-Stable Distributions and Processes

KAUST Repository

Castruccio, Stefano; Huser, Raphaë l; Genton, Marc G.

2016-01-01

In multivariate or spatial extremes, inference for max-stable processes observed at a large collection of points is a very challenging problem and current approaches typically rely on less expensive composite likelihoods constructed from small subsets of data. In this work, we explore the limits of modern state-of-the-art computational facilities to perform full likelihood inference and to efficiently evaluate high-order composite likelihoods. With extensive simulations, we assess the loss of information of composite likelihood estimators with respect to a full likelihood approach for some widely used multivariate or spatial extreme models, we discuss how to choose composite likelihood truncation to improve the efficiency, and we also provide recommendations for practitioners. This article has supplementary material online.

Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 January - 30 June 2003

International Nuclear Information System (INIS)

2003-01-01

The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [de

Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 July - 31 December 2003

International Nuclear Information System (INIS)

2004-01-01

The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [de

Revealing Hidden Structural Order Controlling Both Fast and Slow Glassy Dynamics in Supercooled Liquids

Directory of Open Access Journals (Sweden)

Hua Tong

2018-03-01

Full Text Available The dynamics of a supercooled liquid near the glass transition is characterized by two-step relaxation, fast β and slow α relaxations. Because of the apparently disordered nature of glassy structures, there have been long debates over whether the origin of drastic slowing-down of the α relaxation accompanied by heterogeneous dynamics is thermodynamic or dynamic. Furthermore, it has been elusive whether there is any deep connection between fast β and slow α modes. To settle these issues, here we introduce a set of new structural order parameters characterizing sterically favored structures with high local packing capability, and then access structure-dynamics correlation by a novel nonlocal approach. We find that the particle mobility is under control of the static order parameter field. The fast β process is controlled by the instantaneous order parameter field locally, resulting in short-time particle-scale dynamics. Then the mobility field progressively develops with time t, following the initial order parameter field from disorder to more ordered regions. As is well known, the heterogeneity in the mobility field (dynamic heterogeneity is maximized with a characteristic length ξ_{4}, when t reaches the relaxation time τ_{α}. We discover that this mobility pattern can be predicted solely by a spatial coarse graining of the initial order parameter field at t=0 over a length ξ without any dynamical information. Furthermore, we find a relation ξ∼ξ_{4}, indicating that the static length ξ grows coherently with the dynamic one ξ_{4} upon cooling. This further suggests an intrinsic link between τ_{α} and ξ: the growth of the static length ξ is the origin of dynamical slowing-down. These we confirm for the first time in binary glass formers both in two and three spatial dimensions. Thus, a static structure has two intrinsic characteristic lengths, particle size and ξ, which control dynamics in local and nonlocal manners, resulting

Revealing Hidden Structural Order Controlling Both Fast and Slow Glassy Dynamics in Supercooled Liquids

Science.gov (United States)

Tong, Hua; Tanaka, Hajime

2018-01-01

The dynamics of a supercooled liquid near the glass transition is characterized by two-step relaxation, fast β and slow α relaxations. Because of the apparently disordered nature of glassy structures, there have been long debates over whether the origin of drastic slowing-down of the α relaxation accompanied by heterogeneous dynamics is thermodynamic or dynamic. Furthermore, it has been elusive whether there is any deep connection between fast β and slow α modes. To settle these issues, here we introduce a set of new structural order parameters characterizing sterically favored structures with high local packing capability, and then access structure-dynamics correlation by a novel nonlocal approach. We find that the particle mobility is under control of the static order parameter field. The fast β process is controlled by the instantaneous order parameter field locally, resulting in short-time particle-scale dynamics. Then the mobility field progressively develops with time t , following the initial order parameter field from disorder to more ordered regions. As is well known, the heterogeneity in the mobility field (dynamic heterogeneity) is maximized with a characteristic length ξ4, when t reaches the relaxation time τα. We discover that this mobility pattern can be predicted solely by a spatial coarse graining of the initial order parameter field at t =0 over a length ξ without any dynamical information. Furthermore, we find a relation ξ ˜ξ4, indicating that the static length ξ grows coherently with the dynamic one ξ4 upon cooling. This further suggests an intrinsic link between τα and ξ : the growth of the static length ξ is the origin of dynamical slowing-down. These we confirm for the first time in binary glass formers both in two and three spatial dimensions. Thus, a static structure has two intrinsic characteristic lengths, particle size and ξ , which control dynamics in local and nonlocal manners, resulting in the emergence of the two

Development of upgraded brown coal process

Energy Technology Data Exchange (ETDEWEB)

Komatsu, N.; Sugita, S.; Deguchi, T.; Shigehisa, T.; Makino, E. [Kobe Steel Ltd., Hyogo (Japan). Coal and Energy Project Department

2004-07-01

Half of the world's coal resources are so-called low rank coal (LRC) such as lignite, subbituminous coal. Utilization of such coal is limited due to low heat value and high propensity of spontaneous combustion. Since some of LRCs have advantages as clean coal, i.e. low ash and low sulfur content, LRC can be the excellent feedstock for power generation and metallurgy depending on the upgrading technology. The UBC (upgraded brown coal) process introduced here converts LRC to solid fuel with high heat value and less propensity of self-heating. Various world coals, such as Australian, Indonesian and USA LRC, were tested using the Autoclave and Bench Scale Unit, and the process application to LRC of wide range is proven. The R & D activities of the UBC process are introduced including a demonstration project with a 5 ton/day test plant in progress in Indonesia, expecting near future commercialisation in order to utilize abundant LRC of clean properties. 8 refs., 12 figs., 3 tabs.

MicroED data collection and processing

Energy Technology Data Exchange (ETDEWEB)

Hattne, Johan; Reyes, Francis E.; Nannenga, Brent L.; Shi, Dan; Cruz, M. Jason de la [Janelia Research Campus, Howard Hughes Medical Institute, Ashburn, VA 20147 (United States); Leslie, Andrew G. W. [Medical Research Council Laboratory of Molecular Biology, Cambridge (United Kingdom); Gonen, Tamir, E-mail: gonent@janelia.hhmi.org [Janelia Research Campus, Howard Hughes Medical Institute, Ashburn, VA 20147 (United States)

2015-07-01

The collection and processing of MicroED data are presented. MicroED, a method at the intersection of X-ray crystallography and electron cryo-microscopy, has rapidly progressed by exploiting advances in both fields and has already been successfully employed to determine the atomic structures of several proteins from sub-micron-sized, three-dimensional crystals. A major limiting factor in X-ray crystallography is the requirement for large and well ordered crystals. By permitting electron diffraction patterns to be collected from much smaller crystals, or even single well ordered domains of large crystals composed of several small mosaic blocks, MicroED has the potential to overcome the limiting size requirement and enable structural studies on difficult-to-crystallize samples. This communication details the steps for sample preparation, data collection and reduction necessary to obtain refined, high-resolution, three-dimensional models by MicroED, and presents some of its unique challenges.

What Do Companies in the Processing Industry do in Order to Achieve Success?

Directory of Open Access Journals (Sweden)

Peter BONA

2015-04-01

Full Text Available Borders of countries and continents have become more and more blurred by now, while distances have turned out to be less important. Markets of continents or countries are not separated anymore therefore competition between companies has gotten fiercer and much faster than earlier. What kind of instruments may companies in the processing industry use to maintain their existence and to remain competitive in the fragile system following the economic crisis in 2008? This research aims at finding out how the effects of components belonging to the concept of strategic management system influence outstanding achievement and success. It primarily analyses, in what ways instruments considered being the most determinative, i.e. strategic a structural success factors affect the processing industry. In order to do that the research defines the factors having an influence. Thereafter it explains successful operation of companies with factors emerging via the use of regression models. It uses the balance scorecard as a tool for success criteria describing success. The research tackles the issue of sustainability with a high priority in this system as a success component: the fifth perspective among the other four classic ones. Thus the results of the research will show how strategic and structural success factors can make a company successful and the satisfaction of which groups of interest they affect the most.

Electro/powder separation process

International Nuclear Information System (INIS)

Dunn, J.P.

1977-01-01

A report is presented to introduce the ELECTRO/POWDER process to the P/M Industry. The process effectively uses electrostatic forces to convey, sort, meter, and blend fine powders. The major advantages of this separating process consist of the processing of primary particles, low particle energy due to particle velocity control and the pattern of particle movement over the sieve (vertical oscillation of particles above the sieve aperture). The report briefly describes the forces involved in both mechanical and sieving devices, with major emphasis on the operating principles of this process. Sieve separation of particulates is basically the result of two physical separating processes which occur simultaneously or independently; separation (dispersion) of particulates from each other and the size separation by passage through fixed apertures. In order to accomplish this goal, mechanical sieving devices utilize various motions to induce shear forces between the sieve surface and the particulates, and between the particulates themselves. It is noted that the ELECTRO/POWDER process is making steady progress in becoming an industrial tool for sieving and feeding of fine particles. Its potential extends into both the blending and admixing of powders, either by incorporating two opposing feeders, one being charged with the opposite polarity or by modifying the ELECTRO/SIEVE to incorporate more than one input and a solid electrode to replace the sieve electrode

Heisenberg spin glass experiments and the chiral ordering scenario

International Nuclear Information System (INIS)

Campbell, Ian A.; Petit, Dorothee C.M.C.

2010-01-01

An overview is given of experimental data on Heisenberg spin glass materials so as to make detailed comparisons with numerical results on model Heisenberg spin glasses, with particular reference to the chiral driven ordering transition scenario due to Kawamura and collaborators. On weak anisotropy systems, experiments show critical exponents which are very similar to those estimated numerically for the model Heisenberg chiral ordering transition but which are quite different from those at Ising spin glass transitions. Again on weak anisotropy Heisenberg spin glasses, experimental torque data show well defined in-field transverse ordering transitions up to strong applied fields, in contrast to Ising spin glasses where fields destroy ordering. When samples with stronger anisotropies are studied, critical and in-field behavior tend progressively towards the Ising limit. It can be concluded that the essential physics of laboratory Heisenberg spin glasses mirrors that of model Heisenberg spin glasses, where chiral ordering has been demonstrated numerically. (author)

Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes