WorldWideScience

Sample records for optimized far-red reporters

  1. Far-red fluorescence gene reporter tomography for determination of placement and viability of cell-based gene therapies.

    Science.gov (United States)

    Lu, Yujie; Darne, Chinmay D; Tan, I-Chih; Zhu, Banghe; Hall, Mary A; Lazard, Zawaunyka W; Davis, Alan R; Simpson, Lashan; Sevick-Muraca, Eva M; Olmsted-Davis, Elizabeth A

    2013-10-01

    Non-invasive injectable cellular therapeutic strategies based on sustained delivery of physiological levels of BMP-2 for spinal fusion are emerging as promising alternatives, which could provide sufficient fusion without the associated surgical risks. However, these injectable therapies are dependent on bone formation occurring only at the specific target region. In this study, we developed and deployed fluorescence gene reporter tomography (FGRT) to provide information on in vivo cell localization and viability. This information is sought to confirm the ideal placement of the materials with respect to the area where early bone reaction is required, ultimately providing three dimensional data about the future fusion. However, because almost all conventional fluorescence gene reporters require visible excitation wavelengths, current in vivo imaging of fluorescent proteins is limited by high tissue absorption and confounding autofluorescence. We previously administered fibroblasts engineered to produce BMP-2, but is difficult to determine 3-D information of placement prior to bone formation. Herein we used the far-red fluorescence gene reporter, IFP1.4 to report the position and viability of fibroblasts and developed 3-D tomography to provide placement information. A custom small animal, far-red fluorescence tomography system integrated into a commercial CT scanner was used to assess IFP1.4 fluorescence and to demark 3-D placement of encapsulated fibroblasts with respect to the vertebrae and early bone formation as assessed from CT. The results from three experiments showed that the placement of the materials within the spine could be detected. This work shows that in vivo fluorescence gene reporter tomography of cell-based gene therapy is feasible and could help guide cell-based therapies in preclinical models.

  2. Cyanine Conformational Restraint in the Far-Red Range.

    Science.gov (United States)

    Michie, Megan S; Götz, Ralph; Franke, Christian; Bowler, Matthew; Kumari, Nikita; Magidson, Valentin; Levitus, Marcia; Loncarek, Jadranka; Sauer, Markus; Schnermann, Martin J

    2017-09-13

    Far-red cyanine fluorophores find extensive use in modern microscopy despite modest quantum yields. To improve the photon output of these molecules, we report a synthetic strategy that blocks the major deactivation pathway: excited-state trans-to-cis polyene rotation. In the key transformation, a protected dialdehyde precursor undergoes a cascade reaction to install the requisite tetracyclic ring system. The resulting molecules exhibit the characteristic features of conformational restraint, including improved fluorescence quantum yield and extended lifetime. Moreover, these compounds recover from hydride reduction with dramatically improved efficiency. These observations enable efficient single-molecule localization microscopy in oxygenated buffer without addition of thiols. Enabled by modern organic synthesis, these studies provide a new class of far-red dyes with promising spectroscopic and chemical properties.

  3. Occurrence of Far-Red Light Photoacclimation (FaRLiP in Diverse Cyanobacteria

    Directory of Open Access Journals (Sweden)

    Fei Gan

    2014-12-01

    Full Text Available Cyanobacteria have evolved a number of acclimation strategies to sense and respond to changing nutrient and light conditions. Leptolyngbya sp. JSC-1 was recently shown to photoacclimate to far-red light by extensively remodeling its photosystem (PS I, PS II and phycobilisome complexes, thereby gaining the ability to grow in far-red light. A 21-gene photosynthetic gene cluster (rfpA/B/C, apcA2/B2/D2/E2/D3, psbA3/D3/C2/B2/ H2/A4, psaA2/B2/L2/I2/F2/J2 that is specifically expressed in far-red light encodes the core subunits of the three major photosynthetic complexes. The growth responses to far-red light were studied here for five additional cyanobacterial strains, each of which has a gene cluster similar to that in Leptolyngbya sp. JSC-1. After acclimation all five strains could grow continuously in far-red light. Under these growth conditions each strain synthesizes chlorophylls d, f and a after photoacclimation, and each strain produces modified forms of PS I, PS II (and phycobiliproteins that absorb light between 700 and 800 nm. We conclude that these photosynthetic gene clusters are diagnostic of the capacity to photoacclimate to and grow in far-red light. Given the diversity of terrestrial environments from which these cyanobacteria were isolated, it is likely that FaRLiP plays an important role in optimizing photosynthesis in terrestrial environments.

  4. Bio-inspired Plasmonic Nanoarchitectured Hybrid System Towards Enhanced Far Red-to-Near Infrared Solar Photocatalysis

    OpenAIRE

    2016-01-01

    Solar conversion to fuels or to electricity in semiconductors using far red-to-near infrared (NIR) light, which accounts for about 40% of solar energy, is highly significant. One main challenge is the development of novel strategies for activity promotion and new basic mechanisms for NIR response. Mother Nature has evolved to smartly capture far red-to-NIR light via their intelligent systems due to unique micro/nanoarchitectures, thus motivating us for biomimetic design. Here we report the fi...

  5. Bio-inspired Plasmonic Nanoarchitectured Hybrid System Towards Enhanced Far Red-to-Near Infrared Solar Photocatalysis

    Science.gov (United States)

    Yan, Runyu; Chen, Min; Zhou, Han; Liu, Tian; Tang, Xingwei; Zhang, Ke; Zhu, Hanxing; Ye, Jinhua; Zhang, Di; Fan, Tongxiang

    2016-01-01

    Solar conversion to fuels or to electricity in semiconductors using far red-to-near infrared (NIR) light, which accounts for about 40% of solar energy, is highly significant. One main challenge is the development of novel strategies for activity promotion and new basic mechanisms for NIR response. Mother Nature has evolved to smartly capture far red-to-NIR light via their intelligent systems due to unique micro/nanoarchitectures, thus motivating us for biomimetic design. Here we report the first demonstration of a new strategy, based on adopting nature’s far red-to-NIR responsive architectures for an efficient bio-inspired photocatalytic system. The system is constructed by controlled assembly of light-harvesting plasmonic nanoantennas onto a typical photocatalytic unit with butterfly wings’ 3D micro/nanoarchitectures. Experiments and finite-difference time-domain (FDTD) simulations demonstrate the structural effects on obvious far red-to-NIR photocatalysis enhancement, which originates from (1) Enhancing far red-to-NIR (700~1200 nm) harvesting, up to 25%. (2) Enhancing electric-field amplitude of localized surface plasmon (LSPs) to more than 3.5 times than that of the non-structured one, which promotes the rate of electron-hole pair formation, thus substantially reinforcing photocatalysis. This proof-of-concept study provides a new methodology for NIR photocatalysis and would potentially guide future conceptually new NIR responsive system designs.

  6. Bio-inspired Plasmonic Nanoarchitectured Hybrid System Towards Enhanced Far Red-to-Near Infrared Solar Photocatalysis.

    Science.gov (United States)

    Yan, Runyu; Chen, Min; Zhou, Han; Liu, Tian; Tang, Xingwei; Zhang, Ke; Zhu, Hanxing; Ye, Jinhua; Zhang, Di; Fan, Tongxiang

    2016-01-28

    Solar conversion to fuels or to electricity in semiconductors using far red-to-near infrared (NIR) light, which accounts for about 40% of solar energy, is highly significant. One main challenge is the development of novel strategies for activity promotion and new basic mechanisms for NIR response. Mother Nature has evolved to smartly capture far red-to-NIR light via their intelligent systems due to unique micro/nanoarchitectures, thus motivating us for biomimetic design. Here we report the first demonstration of a new strategy, based on adopting nature's far red-to-NIR responsive architectures for an efficient bio-inspired photocatalytic system. The system is constructed by controlled assembly of light-harvesting plasmonic nanoantennas onto a typical photocatalytic unit with butterfly wings' 3D micro/nanoarchitectures. Experiments and finite-difference time-domain (FDTD) simulations demonstrate the structural effects on obvious far red-to-NIR photocatalysis enhancement, which originates from (1) Enhancing far red-to-NIR (700~1200 nm) harvesting, up to 25%. (2) Enhancing electric-field amplitude of localized surface plasmon (LSPs) to more than 3.5 times than that of the non-structured one, which promotes the rate of electron-hole pair formation, thus substantially reinforcing photocatalysis. This proof-of-concept study provides a new methodology for NIR photocatalysis and would potentially guide future conceptually new NIR responsive system designs.

  7. Diatom Phytochromes Reveal the Existence of Far-Red-Light-Based Sensing in the Ocean.

    Science.gov (United States)

    Fortunato, Antonio Emidio; Jaubert, Marianne; Enomoto, Gen; Bouly, Jean-Pierre; Raniello, Raffaella; Thaler, Michael; Malviya, Shruti; Bernardes, Juliana Silva; Rappaport, Fabrice; Gentili, Bernard; Huysman, Marie J J; Carbone, Alessandra; Bowler, Chris; d'Alcalà, Maurizio Ribera; Ikeuchi, Masahiko; Falciatore, Angela

    2016-03-01

    The absorption of visible light in aquatic environments has led to the common assumption that aquatic organisms sense and adapt to penetrative blue/green light wavelengths but show little or no response to the more attenuated red/far-red wavelengths. Here, we show that two marine diatom species, Phaeodactylum tricornutum and Thalassiosira pseudonana, possess a bona fide red/far-red light sensing phytochrome (DPH) that uses biliverdin as a chromophore and displays accentuated red-shifted absorbance peaks compared with other characterized plant and algal phytochromes. Exposure to both red and far-red light causes changes in gene expression in P. tricornutum, and the responses to far-red light disappear in DPH knockout cells, demonstrating that P. tricornutum DPH mediates far-red light signaling. The identification of DPH genes in diverse diatom species widely distributed along the water column further emphasizes the ecological significance of far-red light sensing, raising questions about the sources of far-red light. Our analyses indicate that, although far-red wavelengths from sunlight are only detectable at the ocean surface, chlorophyll fluorescence and Raman scattering can generate red/far-red photons in deeper layers. This study opens up novel perspectives on phytochrome-mediated far-red light signaling in the ocean and on the light sensing and adaptive capabilities of marine phototrophs. © 2016 American Society of Plant Biologists. All rights reserved.

  8. Optimal LED far-red light intensity in end-of-day promoting tomato growth and development in greenhouse%暗前适宜LED远红光光照强度促进设施番茄种苗生长发育

    Institute of Scientific and Technical Information of China (English)

    曹凯; 于捷; 叶林; 赵海亮; 邹志荣

    2016-01-01

    为了研究LED光源在设施番茄育苗生产上的精准化利用。该试验以金鹏1号番茄植株为试材,研究了进入黑暗前LED远红光处理对番茄植株形态、激素含量、光合速率和矿质元素含量的影响。结果表明,当番茄植株进入黑暗前进行10 min远红光处理,番茄植株的株高及茎的鲜质量发生了明显变化,番茄植株的株高和茎的鲜质量随着远红光光照强度的增加而增加,当远红光的光照强度增加到10μmol/(m2·s)时番茄植株的株高和茎的鲜质量也达到了最大值。与对照相比,进入黑暗前进行时长10 min,光照强度为10μmol/(m2·s)的远红光处理后番茄植株叶片中的生长素和赤霉素3的含量显著上升;叶绿素和净光合速率显著降低;番茄植株茎中N含量显著降低,叶中P含量显著降低,K含量显著升高,根系中的N、P、K含量都显著增加。因此,可以通过调控黑暗前远红光的光照强度来精确调控番茄植株的株高,控制番茄的生长。%Light emitting diode (LED) is a new light source which has several unique advantages, including the ability to control the spectral composition, the relatively cool emitting surfaces and minimum heating. Therefore, the research of precision utilization of LED is very important for energy saving and accuracy control in protected vegetable growth. In this study, Jinpeng NO.1 tomato seedlings were used as the material. After germination, the same-sized plants were selected and transplanted to the LED growth chamber with a temperature of 25℃ during the day and 20℃ during the night, 12 h photoperiod, and 65% relative humidity. In the daytime, tomato seedlings were grown under white LED at an illumination intensity of 168µmol/(m2·s). The ratio of red light (655-665 nm) to far red light (725-735 nm) in white LED was 6.42. Before the tomato seedlings entered the darkness, they were shone by far-red light from 20:00 to 20

  9. Far-red light is needed for efficient photochemistry and photosynthesis.

    Science.gov (United States)

    Zhen, Shuyang; van Iersel, Marc W

    2017-02-01

    The efficiency of monochromatic light to drive photosynthesis drops rapidly at wavelengths longer than 685nm. The photosynthetic efficiency of these longer wavelengths can be improved by adding shorter wavelength light, a phenomenon known as the Emerson enhancement effect. The reverse effect, the enhancement of photosynthesis under shorter wavelength light by longer wavelengths, however, has not been well studied and is often thought to be insignificant. We quantified the effect of adding far-red light (peak at 735nm) to red/blue or warm-white light on the photosynthetic efficiency of lettuce (Lactuca sativa). Adding far-red light immediately increased quantum yield of photosystem II (ΦPSII) of lettuce by an average of 6.5 and 3.6% under red/blue and warm-white light, respectively. Similar or greater increases in ΦPSII were observed after 20min of exposure to far-red light. This longer-term effect of far-red light on ΦPSII was accompanied by a reduction in non-photochemical quenching of fluorescence (NPQ), indicating that far-red light reduced the dissipation of absorbed light as heat. The increase in ΦPSII and complementary decrease in NPQ is presumably due to preferential excitation of photosystem I (PSI) by far-red light, which leads to faster re-oxidization of the plastoquinone pool. This facilitates reopening of PSII reaction centers, enabling them to use absorbed photons more efficiently. The increase in ΦPSII by far-red light was associated with an increase in net photosynthesis (Pn). The stimulatory effect of far-red light increased asymptotically with increasing amounts of far-red. Overall, our results show that far-red light can increase the photosynthetic efficiency of shorter wavelength light that over-excites PSII. Copyright © 2016 Elsevier GmbH. All rights reserved.

  10. A dual-color far-red to near-infrared firefly luciferin analogue designed for multiparametric bioluminescence imaging.

    Science.gov (United States)

    Jathoul, Amit P; Grounds, Helen; Anderson, James C; Pule, Martin A

    2014-11-24

    Red-shifted bioluminescent emitters allow improved in vivo tissue penetration and signal quantification, and have led to the development of beetle luciferin analogues that elicit red-shifted bioluminescence with firefly luciferase (Fluc). However, unlike natural luciferin, none have been shown to emit different colors with different luciferases. We have synthesized and tested the first dual-color, far-red to near-infrared (nIR) emitting analogue of beetle luciferin, which, akin to natural luciferin, exhibits pH dependent fluorescence spectra and emits bioluminescence of different colors with different engineered Fluc enzymes. Our analogue produces different far-red to nIR emission maxima up to λ(max)=706 nm with different Fluc mutants. This emission is the most red-shifted bioluminescence reported without using a resonance energy transfer acceptor. This improvement should allow tissues to be more effectively probed using multiparametric deep-tissue bioluminescence imaging.

  11. Production of transgenic cloned pigs expressing the far-red fluorescent protein monomeric Plum.

    Science.gov (United States)

    Watanabe, Masahito; Kobayashi, Mirina; Nagaya, Masaki; Matsunari, Hitomi; Nakano, Kazuaki; Maehara, Miki; Hayashida, Gota; Takayanagi, Shuko; Sakai, Rieko; Umeyama, Kazuhiro; Watanabe, Nobuyuki; Onodera, Masafumi; Nagashima, Hiroshi

    2015-01-01

    Monomeric Plum (Plum), a far-red fluorescent protein with photostability and photopermeability, is potentially suitable for in vivo imaging and detection of fluorescence in body tissues. The aim of this study was to generate transgenic cloned pigs exhibiting systemic expression of Plum using somatic cell nuclear transfer (SCNT) technology. Nuclear donor cells for SCNT were obtained by introducing a Plum-expression vector driven by a combination of the cytomegalovirus early enhancer and chicken beta-actin promoter into porcine fetal fibroblasts (PFFs). The cleavage and blastocyst formation rates of reconstructed SCNT embryos were 81.0% (34/42) and 78.6% (33/42), respectively. At 36-37 days of gestation, three fetuses systemically expressing Plum were obtained from one recipient to which 103 SCNT embryos were transferred (3/103, 2.9%). For generation of offspring expressing Plum, rejuvenated PFFs were established from one cloned fetus and used as nuclear donor cells. Four cloned offspring and one stillborn cloned offspring were produced from one recipient to which 117 SCNT embryos were transferred (5/117, 4.3%). All offspring exhibited high levels of Plum fluorescence in blood cells, such as lymphocytes, monocytes and granulocytes. In addition, the skin, heart, kidney, pancreas, liver and spleen also exhibited Plum expression. These observations demonstrated that transfer of the Plum gene did not interfere with the development of porcine SCNT embryos and resulted in the successful generation of transgenic cloned pigs that systemically expressed Plum. This is the first report of the generation and characterization of transgenic cloned pigs expressing the far-red fluorescent protein Plum.

  12. Production of transgenic cloned pigs expressing the far-red fluorescent protein monomeric Plum

    Science.gov (United States)

    WATANABE, Masahito; KOBAYASHI, Mirina; NAGAYA, Masaki; MATSUNARI, Hitomi; NAKANO, Kazuaki; MAEHARA, Miki; HAYASHIDA, Gota; TAKAYANAGI, Shuko; SAKAI, Rieko; UMEYAMA, Kazuhiro; WATANABE, Nobuyuki; ONODERA, Masafumi; NAGASHIMA, Hiroshi

    2015-01-01

    Monomeric Plum (Plum), a far-red fluorescent protein with photostability and photopermeability, is potentially suitable for in vivo imaging and detection of fluorescence in body tissues. The aim of this study was to generate transgenic cloned pigs exhibiting systemic expression of Plum using somatic cell nuclear transfer (SCNT) technology. Nuclear donor cells for SCNT were obtained by introducing a Plum-expression vector driven by a combination of the cytomegalovirus early enhancer and chicken beta-actin promoter into porcine fetal fibroblasts (PFFs). The cleavage and blastocyst formation rates of reconstructed SCNT embryos were 81.0% (34/42) and 78.6% (33/42), respectively. At 36–37 days of gestation, three fetuses systemically expressing Plum were obtained from one recipient to which 103 SCNT embryos were transferred (3/103, 2.9%). For generation of offspring expressing Plum, rejuvenated PFFs were established from one cloned fetus and used as nuclear donor cells. Four cloned offspring and one stillborn cloned offspring were produced from one recipient to which 117 SCNT embryos were transferred (5/117, 4.3%). All offspring exhibited high levels of Plum fluorescence in blood cells, such as lymphocytes, monocytes and granulocytes. In addition, the skin, heart, kidney, pancreas, liver and spleen also exhibited Plum expression. These observations demonstrated that transfer of the Plum gene did not interfere with the development of porcine SCNT embryos and resulted in the successful generation of transgenic cloned pigs that systemically expressed Plum. This is the first report of the generation and characterization of transgenic cloned pigs expressing the far-red fluorescent protein Plum. PMID:25739316

  13. Phytochrome and Seed Germination. III. Action of Prolonged Far Red Irradiation on the Germination of Tomato and Cucumber Seeds.

    Science.gov (United States)

    Yaniv, Z; Mancinelli, A L; Smith, P

    1967-11-01

    Prolonged irradiation with continuous or intermittent far red prevents the germination of tomato and cucumber seeds. The inhibitory efficiency of intermittent far red decreases with the lengthening of the interval between successive irradiations, and with the increase of temperature. If each far red irradiation is followed by red, germination is restored. Intermittent far red is less inhibitory than intermittent red-far red when red is given immediately before each far red. This effect is more evident when the interval between successive irradiation becomes longer.

  14. Adaptive and acclimative responses of cyanobacteria to far-red light.

    Science.gov (United States)

    Gan, Fei; Bryant, Donald A

    2015-10-01

    Cyanobacteria use three major photosynthetic complexes, photosystem (PS) I, PS II and phycobilisomes, to harvest and convert sunlight into chemical energy. Until recently, it was generally thought that cyanobacteria only used light between 400 nm and 700 nm to perform photosynthesis. However, the discovery of chlorophyll (Chl) d in Acaryochloris marina and Chl f in Halomicronema hongdechloris showed that some cyanobacteria could utilize far-red light. The synthesis of Chl f (and Chl d) is part of an extensive acclimation process, far-red light photoacclimation (FaRLiP), which occurs in many cyanobacteria. Organisms performing FaRLiP contain a conserved set of 17 genes encoding paralogous subunits of the three major photosynthetic complexes. Far-red light photoacclimation leads to substantial remodelling of the photosynthetic apparatus and other changes in cellular metabolism through extensive changes in transcription. Far-red light photoacclimation appears to be controlled by a red/far-red photoreceptor, RfpA, as well as two response regulators (RfpB and RfpC), one of which is a DNA-binding protein. The remodelled photosynthetic complexes, including novel phycobiliproteins, absorb light above 700 nm and enable cells to grow in far-red light. A much simpler acclimation response, low-light photoacclimation (LoLiP), occurs in some cyanobacteria that contain the apcD4-apcB3-isiX cluster, which allows cells to grow under low light conditions.

  15. Screening far red probes for use on optical biochip devices

    Science.gov (United States)

    Njoh, Kerenza L.; Patterson, Laurence H.; Pors, Klaus; Zloh, Mire; Ameer-Beg, Simon; Summers, Huw; Matthews, Daniel; Errington, Rachel J.; Smith, Paul J.

    2006-02-01

    In situ spectral analysis can be used to understand the targeting and interaction of agents in cellular compartments. A range of novel red excitable fluorescent probes, related to the anthraquinone family of anti-cancer agents, were designed for their DNA affinic properties and their ability to enter and penetrate living cells. We report on the spectral features of these probes, both in solution and bound within intact cells, to identify unique fluorescent signatures that exploit their use in bioassays on optical biochip devices. The probes demonstrated red shifted emission spectra and increased 2 photon lifetime, with minimal fluorescent enhancement, upon binding to DNA. Spectral confocal laser scanning microscopy revealed complex emission profiles representing the bound (nuclear) and unbound (cytoplasmic) fractions of the DNA probes within live interphase, mitotic and apoptotic cells. Analysis of the emission peaks encoded the spectra to provide cell compartment recognition and profiles for cells in different cell states. Sampling the entire emission spectra of these probes for cell locating, even in the presence of unbound molecules, provides good signal-to-noise in biochip devices. Furthermore, by sampling the fluorescence output at specific spectral windows we can obtain high spatial information without imaging. The technological challenge is to integrate these fluorophores and appropriate detection capacity onto an optical biochip platform with microfluidic systems for cell handling.

  16. FAR-RED ELONGATED HYPOCOTYL3 promotes floral meristem determinacy in Arabidopsis.

    Science.gov (United States)

    Liu, Luping; Li, Bo; Liu, Xigang

    2016-10-02

    The transposase-derived transcription factor genes FAR-RED ELONGATED HYPOCOTYL3 (FHY3) and FAR-RED IMPAIRED RESPONSE1 (FAR1) have redundant and multifaceted roles in plant growth and development during the vegetative stage, including phytochrome A-mediated far-red light (FR) signaling and circadian clock entrainment. Little is known about their functions in the reproductive stage. We recently demonstrated that FHY3 plays important roles in shoot apical meristem (SAM) maintenance and floral meristem (FM) determinacy through its target genes CLAVATA3 (CLV3), SEPALLATA1 (SEP1) and SEP2. Here we present data that FHY3 but not its homolog, FAR1, has a distinct role in FM determinacy in a manner independent of its light signaling and circadian pathway functions. Moreover, genome-wide gene expression profiling showed that the homeostasis of the FM is critical for the regulation of FM activity.

  17. Characterization of a newly isolated freshwater Eustigmatophyte alga capable of utilizing far-red light as its sole light source.

    Science.gov (United States)

    Wolf, Benjamin M; Niedzwiedzki, Dariusz M; Magdaong, Nikki Cecil M; Roth, Robyn; Goodenough, Ursula; Blankenship, Robert E

    2017-05-25

    Oxygenic phototrophs typically utilize visible light (400-700 nm) to drive photosynthesis. However, a large fraction of the energy in sunlight is contained in the far-red region, which encompasses light beyond 700 nm. In nature, certain niche environments contain high levels of this far-red light due to filtering by other phototrophs, and in these environments, organisms with photosynthetic antenna systems adapted to absorbing far-red light are able to thrive. We used selective far-red light conditions to isolate such organisms in environmental samples. One cultured organism, the Eustigmatophyte alga Forest Park Isolate 5 (FP5), is able to absorb far-red light using a chlorophyll (Chl) a-containing antenna complex, and is able to grow under solely far-red light. Here we characterize the antenna system from this organism, which is able to shift the absorption of Chl a to >705 nm.

  18. Shedding (far-red) light on phytochrome mechanisms and responses in land plants

    NARCIS (Netherlands)

    Possart, A.; Fleck, C.; Hiltbrunner, A.

    2014-01-01

    In order to monitor ambient light conditions, plants rely on functionally diversified photoreceptors. Among these, phytochromes perceive red (R) and far-red (FR) light. FR light does not constitute a photosynthetic energy source; it however influences adaptive and developmental processes. In seed pl

  19. Far-red light photoacclimation (FaRLiP) in Synechococcus sp. PCC 7335. II.Characterization of phycobiliproteins produced during acclimation to far-red light.

    Science.gov (United States)

    Ho, Ming-Yang; Gan, Fei; Shen, Gaozhong; Bryant, Donald A

    2017-02-01

    Phycobilisomes (PBS) are antenna complexes that harvest light for photosystem (PS) I and PS II in cyanobacteria and some algae. A process known as far-red light photoacclimation (FaRLiP) occurs when some cyanobacteria are grown in far-red light (FRL). They synthesize chlorophylls d and f and remodel PS I, PS II, and PBS using subunits paralogous to those produced in white light. The FaRLiP strain, Leptolyngbya sp. JSC-1, replaces hemidiscoidal PBS with pentacylindrical cores, which are produced when cells are grown in red or white light, with PBS with bicylindrical cores when cells are grown in FRL. This study shows that the PBS of another FaRLiP strain, Synechococcus sp. PCC 7335, are not remodeled in cells grown in FRL. Instead, cells grown in FRL produce bicylindrical cores that uniquely contain the paralogous allophycocyanin subunits encoded in the FaRLiP cluster, and these bicylindrical cores coexist with red-light-type PBS with tricylindrical cores. The bicylindrical cores have absorption maxima at 650 and 711 nm and a low-temperature fluorescence emission maximum at 730 nm. They contain ApcE2:ApcF:ApcD3:ApcD2:ApcD5:ApcB2 in the approximate ratio 2:2:4:6:12:22, and a structural model is proposed. Time course experiments showed that bicylindrical cores were detectable about 48 h after cells were transferred from RL to FRL and that synthesis of red-light-type PBS continued throughout a 21-day growth period. When considered in comparison with results for other FaRLiP cyanobacteria, the results here show that acclimation responses to FRL can differ considerably among FaRLiP cyanobacteria.

  20. In Vivo Imaging of Far-red Fluorescent Proteins after DNA Electrotransfer to Muscle Tissue

    DEFF Research Database (Denmark)

    Hojman, Pernille; Eriksen, Jens; Gehl, Julie

    2009-01-01

    DNA electrotransfer to muscle tissue yields long-term, high levels of gene expression; showing great promise for future gene therapy. We want to characterize the novel far-red fluorescent protein Katushka as a marker for gene expression using time domain fluorescence in vivo imaging. Highly...... weeks. Depth and 3D analysis proved that the expression was located in the target muscle. In vivo bio-imaging using the novel Katushka fluorescent protein enables excellent evaluation of the transfection efficacy, and spatial distribution, but lacks long-term stability....

  1. A far-red fluorescent protein evolved from a cyanobacterial phycobiliprotein.

    Science.gov (United States)

    Rodriguez, Erik A; Tran, Geraldine N; Gross, Larry A; Crisp, Jessica L; Shu, Xiaokun; Lin, John Y; Tsien, Roger Y

    2016-09-01

    Far-red fluorescent proteins (FPs) are desirable for in vivo imaging because with these molecules less light is scattered, absorbed, or re-emitted by endogenous biomolecules compared with cyan, green, yellow, and orange FPs. We developed a new class of FP from an allophycocyanin α-subunit (APCα). Native APC requires a lyase to incorporate phycocyanobilin. The evolved FP, which we named small ultra-red FP (smURFP), covalently attaches a biliverdin (BV) chromophore without a lyase, and has 642/670-nm excitation-emission peaks, a large extinction coefficient (180,000 M(-1)cm(-1)) and quantum yield (18%), and photostability comparable to that of eGFP. smURFP has significantly greater BV incorporation rate and protein stability than the bacteriophytochrome (BPH) FPs. Moreover, BV supply is limited by membrane permeability, and smURFPs (but not BPH FPs) can incorporate a more membrane-permeant BV analog, making smURFP fluorescence comparable to that of FPs from jellyfish or coral. A far-red and near-infrared fluorescent cell cycle indicator was created with smURFP and a BPH FP.

  2. In Vivo Imaging of Far-red Fluorescent Proteins after DNA Electrotransfer to Muscle Tissue

    Directory of Open Access Journals (Sweden)

    Hojman Pernille

    2009-04-01

    Full Text Available Abstract DNA electrotransfer to muscle tissue yields long-term, high levels of gene expression; showing great promise for future gene therapy. We want to characterize the novel far-red fluorescent protein Katushka as a marker for gene expression using time domain fluorescence in vivo imaging. Highly efficient transgenic expression was observed after DNA electrotransfer with 100-fold increase in fluorescent intensity. The fluorescent signal peaked 1 week after transfection and returned to background level within 4 weeks. Katushka expression was not as stable as GFP expression, which was detectable for 8 weeks. Depth and 3D analysis proved that the expression was located in the target muscle. In vivo bio-imaging using the novel Katushka fluorescent protein enables excellent evaluation of the transfection efficacy, and spatial distribution, but lacks long-term stability.

  3. Far-red light activatable, multifunctional prodrug for fluorescence optical imaging and combinational treatment.

    Science.gov (United States)

    Bio, Moses; Rajaputra, Pallavi; Nkepang, Gregory; You, Youngjae

    2014-04-24

    We recently developed "photo-unclick chemistry", a novel chemical tool involving the cleavage of aminoacrylate by singlet oxygen, and demonstrated its application to visible light-activatable prodrugs. In this study, we prepared an advanced multifunctional prodrug, Pc-(L-CA4)2, composed of the fluorescent photosensitizer phthalocyanine (Pc), an SO-labile aminoacrylate linker (L), and a cytotoxic drug combretastatin A-4 (CA4). Pc-(L-CA4)2 had reduced dark toxicity compared with CA4. However, once illuminated, it showed improved toxicity similar to CA4 and displayed bystander effects in vitro. We monitored the time-dependent distribution of Pc-(L-CA4)2 using optical imaging with live mice. We also effectively ablated tumors by the illumination with far-red light to the mice, presumably through the combined effects of photodynamic therapy (PDT) and released chemotherapy drug, without any sign of acute systemic toxicity.

  4. Far-red light-insensitive, phytochrome A-deficient mutants of tomato.

    Science.gov (United States)

    van Tuinen, A; Kerckhoffs, L H; Nagatani, A; Kendrick, R E; Koornneef, M

    1995-01-20

    We have selected two recessive mutants of tomato with slightly longer hypocotyls than the wild type, one under low fluence rate (3 mumol/m2/s) red light (R) and the other under low fluence rate blue light. These two mutants were shown to be allelic and further analysis revealed that hypocotyl growth was totally insensitive to far-red light (FR). We propose the gene symbol fri (far-red light insensitive) for this locus and have mapped it on chromosome 10. Immunochemically detectable phytochrome A polypeptide is essentially absent in the fri mutants as is the bulk spectrophotometrically detectable labile phytochrome pool in etiolated seedlings. A phytochrome B-like polypeptide is present in normal amounts and a small stable phytochrome pool can be readily detected by spectrophotometry in the fri mutants. Inhibition of hypocotyl growth by a R pulse given every 4 h is quantitatively similar in the fri mutants and wild type and the effect is to a large extent reversible if R pulses are followed immediately by a FR pulse. After 7 days in darkness, both fri mutants and the wild type become green on transfer to white light, but after 7 days in FR, the wild-type seedlings that have expanded their cotyledons lose their capacity to green in white light, while the fri mutants de-etiolate. Adult plants of the fri mutants show retarded growth and are prone to wilting, but exhibit a normal elongation response to FR given at the end of the daily photoperiod. The inhibition of seed germination by continuous FR exhibited by the wild type is normal in the fri mutants.(ABSTRACT TRUNCATED AT 250 WORDS)

  5. Development of FRET-Based Assays in the Far-Red Using CdTe Quantum Dots

    Directory of Open Access Journals (Sweden)

    E. Z. Chong

    2007-01-01

    Full Text Available Colloidal quantum dots (QDs are now commercially available in a biofunctionalized form, and Förster resonance energy transfer (FRET between bioconjugated dots and fluorophores within the visible range has been observed. We are particularly interested in the far-red region, as from a biological perspective there are benefits in pushing to ∼700 nm to minimize optical absorption (ABS within tissue and to avoid cell autofluorescence. We report on FRET between streptavidin- (STV- conjugated CdTe quantum dots, Qdot705-STV, with biotinylated DY731-Bio fluorophores in a donor-acceptor assay. We also highlight the changes in DY731-Bio absorptivity during the streptavidin-biotin binding process which can be attributed to the structural reorientation. For fluorescence beyond 700 nm, different alloy compositions are required for the QD core and these changes directly affect the fluorescence decay dynamics producing a marked biexponential decay with a long-lifetime component in excess of 100 nanoseconds. We compare the influence of the two QD relaxation routes upon FRET dynamics in the presence of DY731-Bio.

  6. STED microscopy detects and quantifies liquid phase separation in lipid membranes using a new far-red emitting fluorescent phosphoglycerolipid analogue.

    Science.gov (United States)

    Honigmann, Alf; Mueller, Veronika; Hell, Stefan W; Eggeling, Christian

    2013-01-01

    We have developed a bright, photostable, and far-red emitting fluorescent phosphoglycerolipid analogue to probe diffusion characteristics of lipids in membranes. The lipid analogue consists of a saturated (C18) phosphoethanolamine and a hydrophilic far-red emitting fluorescent dye (KK114) that is tethered to the head group by a long polyethylenglycol linker. In contrast to reported far-red emitting fluorescent lipid analogues, this one partitions predominantly into liquid ordered domains of phase-separated ternary bilayers. We performed fluorescence correlation spectroscopy with a super-resolution STED microscope (STED-FCS) to measure the lateral diffusion of the new lipid analogue in the liquid ordered (Lo) and disordered (Ld) phase. On a mica support, we observed micrometer large phases and found that the lipid analogue diffuses freely on all tested spatial scales (40-250 nm) in both the Ld and Lo phase with diffusion coefficients of 1.8 microm2 s(-1) and 0.7 microm2 s(-1) respectively. This indicates that the tight molecular packing of the Lo phase mainly slows down the diffusion rather than causing anomalous sub-diffusion. The same ternary mixture deposited on acid-cleaned glass forms Lo nanodomains of analogue into the nano-domains, where diffusion is slowed down. Our results suggest that STED-FCS in combination with a Lo-partitioning fluorescent lipid analogue can directly probe the presence of Lo nano-domains, which in the future should allow the study of potential lipid rafts in live-cell membranes.

  7. A red and far-red light receptor mutation confers resistance to the herbicide glyphosate

    Science.gov (United States)

    Sharkhuu, Altanbadralt; Narasimhan, Meena L; Merzaban, Jasmeen S; Bressan, Ray A; Weller, Steve; Gehring, Chris

    2014-01-01

    Glyphosate is a widely applied broad-spectrum systemic herbicide that inhibits competitively the penultimate enzyme 5-enolpyruvylshikimate 3-phosphate synthase (EPSPS) from the shikimate pathway, thereby causing deleterious effects. A glyphosate-resistant Arabidopsis mutant (gre1) was isolated and genetic analyses indicated that a dysfunctional red (R) and far-red (FR) light receptor, phytochrome B (phyB), caused this phenotype. This finding is consistent with increased glyphosate sensitivity and glyphosate-induced shikimate accumulation in low R:FR light, and the induction of genes encoding enzymes of the shikimate pathway in high R:FR light. Expression of the shikimate pathway genes exhibited diurnal oscillation and this oscillation was altered in the phyB mutant. Furthermore, transcript analysis suggested that this diurnal oscillation was not only dependent on phyB but was also due to circadian regulatory mechanisms. Our data offer an explanation of the well documented observation that glyphosate treatment at various times throughout the day, with their specific composition of light quality and intensity, results in different efficiencies of the herbicide. PMID:24654847

  8. A red and far-red light receptor mutation confers resistance to the herbicide glyphosate

    KAUST Repository

    Sharkhuu, Altanbadralt

    2014-06-01

    Glyphosate is a widely applied broad-spectrum systemic herbicide that inhibits competitively the penultimate enzyme 5-enolpyruvylshikimate 3-phosphate synthase (EPSPS) from the shikimate pathway, thereby causing deleterious effects. A glyphosate-resistant Arabidopsis mutant (gre1) was isolated and genetic analyses indicated that a dysfunctional red (R) and far-red (FR) light receptor, phytochrome B (phyB), caused this phenotype. This finding is consistent with increased glyphosate sensitivity and glyphosate-induced shikimate accumulation in low R:FR light, and the induction of genes encoding enzymes of the shikimate pathway in high R:FR light. Expression of the shikimate pathway genes exhibited diurnal oscillation and this oscillation was altered in the phyB mutant. Furthermore, transcript analysis suggested that this diurnal oscillation was not only dependent on phyB but was also due to circadian regulatory mechanisms. Our data offer an explanation of the well documented observation that glyphosate treatment at various times throughout the day, with their specific composition of light quality and intensity, results in different efficiencies of the herbicide.

  9. Shedding (far-red) light on phytochrome mechanisms and responses in land plants.

    Science.gov (United States)

    Possart, Anja; Fleck, Christian; Hiltbrunner, Andreas

    2014-03-01

    In order to monitor ambient light conditions, plants rely on functionally diversified photoreceptors. Among these, phytochromes perceive red (R) and far-red (FR) light. FR light does not constitute a photosynthetic energy source; it however influences adaptive and developmental processes. In seed plants, phytochrome A (phyA) acts as FR receptor and mediates FR high irradiance responses (FR-HIRs). It exerts a dual role by promoting e.g. germination and seedling de-etiolation in canopy shade and by antagonising shade avoidance growth. Even though cryptogam plants such as mosses and ferns do not have phyA, they show FR-induced responses. In the present review we discuss the mechanistic basis of phyA-dependent FR-HIRs as well as their dual role in seed plants. We compare FR responses in seed plants and cryptogam plants and conclude on different potential concepts for the detection of canopy shade. Scenarios for the evolution of FR perception and responses are discussed.

  10. A red and far-red light receptor mutation confers resistance to the herbicide glyphosate.

    Science.gov (United States)

    Sharkhuu, Altanbadralt; Narasimhan, Meena L; Merzaban, Jasmeen S; Bressan, Ray A; Weller, Steve; Gehring, Chris

    2014-06-01

    Glyphosate is a widely applied broad-spectrum systemic herbicide that inhibits competitively the penultimate enzyme 5-enolpyruvylshikimate 3-phosphate synthase (EPSPS) from the shikimate pathway, thereby causing deleterious effects. A glyphosate-resistant Arabidopsis mutant (gre1) was isolated and genetic analyses indicated that a dysfunctional red (R) and far-red (FR) light receptor, phytochrome B (phyB), caused this phenotype. This finding is consistent with increased glyphosate sensitivity and glyphosate-induced shikimate accumulation in low R:FR light, and the induction of genes encoding enzymes of the shikimate pathway in high R:FR light. Expression of the shikimate pathway genes exhibited diurnal oscillation and this oscillation was altered in the phyB mutant. Furthermore, transcript analysis suggested that this diurnal oscillation was not only dependent on phyB but was also due to circadian regulatory mechanisms. Our data offer an explanation of the well documented observation that glyphosate treatment at various times throughout the day, with their specific composition of light quality and intensity, results in different efficiencies of the herbicide.

  11. Red/Far Red Light Controls Arbuscular Mycorrhizal Colonization via Jasmonic Acid and Strigolactone Signaling.

    Science.gov (United States)

    Nagata, Maki; Yamamoto, Naoya; Shigeyama, Tamaki; Terasawa, Yohei; Anai, Toyoaki; Sakai, Tatsuya; Inada, Sayaka; Arima, Susumu; Hashiguchi, Masatsugu; Akashi, Ryo; Nakayama, Hideyuki; Ueno, Daisuke; Hirsch, Ann M; Suzuki, Akihiro

    2015-11-01

    Establishment of a nitrogen-fixing symbiosis between legumes and rhizobia not only requires sufficient photosynthate, but also the sensing of the ratio of red to far red (R/FR) light. Here, we show that R/FR light sensing also positively influences the arbuscular mycorrhizal (AM) symbiosis of a legume and a non-legume through jasmonic acid (JA) and strigolactone (SL) signaling. The level of AM colonization in high R/FR light-grown tomato and Lotus japonicus significantly increased compared with that determined for low R/FR light-grown plants. Transcripts for JA-related genes were also elevated under high R/FR conditions. The root exudates derived from high R/FR light-grown plants contained more (+)-5-deoxystrigol, an AM-fungal hyphal branching inducer, than those from low R/FR light-grown plants. In summary, high R/FR light changes not only the levels of JA and SL synthesis, but also the composition of plant root exudates released into the rhizosphere, in this way augmenting the AM symbiosis.

  12. Prevention of Action of Far-Red-Absorbing Phytochrome in Rumex crispus L. Seeds by Ethanol.

    Science.gov (United States)

    Taylorson, R B

    1984-02-01

    Phytochrome-enhanced germination of curled dock (Rumex crispus L.) seeds is further stimulated by pretreatments in solutions of 0.5 to 2 molar methanol and 0.03 to >/= 0.3 molar 2-propanol during a 2-day 20 degrees C imbibition. Similar pretreatments in 0.1 molar ethanol, acetaldehyde, and n-propanol inhibit phytochrome-enhanced germination. If exposure to ethanol is delayed until 16 hours after a red irradiation, seeds escape the ethanol inhibition indicating a mechanism other than toxicity. The rate of escape from ethanol inhibition roughly parallels the escape from phytochrome control in seeds held in water only, indicating possible ethanol effects on phytochrome. It was found that ethanol pretreatment prevents the far-red absorbing form of phytochrome (Pfr) from acting but does not accelerate dark decay or prevent transformation. Ethanol inhibition may be prevented if ethanol pretreatment is at 10 degrees C instead of 20 degrees C, or may be overcome by transferring ethanol-pretreated seeds to 10 degrees C in water. Similarly, ethanol inhibition can be overcome by a 2-hour 40 degrees C temperature shift concluding the pretreatment. It is proposed that the ethanol causes perturbations at a membrane which prevent Pfr from acting.

  13. Detection of Silver Nanoparticles in Cells by Flow Cytometry Using Light Scattering and Far-red Fluorescence

    Science.gov (United States)

    The cellular uptake of different sized silver nanoparticles (l0 nm, 50 nm, and 75nm) coated with polyvinylpyrrolidone (PVP) or citrate in ARPE-19 cells following 24 hour incubation was detected by side scatter through the use of a flow cytometer. A large far red fluorescence sign...

  14. Detection of Silver Nanoparticles in Cells by Flow Cytometry Using Light Scattering and Far-red Fluorescence

    Science.gov (United States)

    The cellular uptake of different sized silver nanoparticles (l0 nm, 50 nm, and 75nm) coated with polyvinylpyrrolidone (PVP) or citrate in ARPE-19 cells following 24 hour incubation was detected by side scatter through the use of a flow cytometer. A large far red fluorescence sign...

  15. The Use of Light-Emitting Diodes (LEDs) as Green and Red/Far-Red Light Sources in Plant Physiology.

    Science.gov (United States)

    Jackson, David L.; And Others

    1985-01-01

    The use of green, red, and far-red light-emitting diodes (LEDs) as light sources for plant physiological studies is outlined and evaluated. Indicates that LED lamps have the advantage over conventional light sources in that they are lightweight, low-cost, portable, easily constructed, and do not require color filters. (Author/DH)

  16. Jasmonic acid enhancement of anthocyanin accumulation is dependent on phytochrome A signaling pathway under far-red light in Arabidopsis.

    Science.gov (United States)

    Li, Ting; Jia, Kun-Peng; Lian, Hong-Li; Yang, Xu; Li, Ling; Yang, Hong-Quan

    2014-11-07

    Anthocyanins are critical for plants. It is shown that the expression of genes encoding the key enzymes such as dihydroflavonol 4-reductase (DFR), UDP-Glc: flavonoid 3-O-glucosyltransferase (UF3GT), and leucoanthocyanidin dioxygenase (LDOX) in anthocyanin biosynthesis pathway is regulated by MYB75, a R2R3 MYB transcription factor. The production of anthocyanin is known to be promoted by jasmonic acid (JA) in light but not in darkness. The photoreceptors cryptochrome 1 (CRY1), phytochrome B (phyB), and phytochrome A (phyA) are also shown to mediate light promotion of anthocyanin accumulation, respectively, whereas their downstream factor COP1, a master negative regulator of photomorphogensis, represses anthocyanin accumulation. However, whether JA coordinates with photoreceptors in the regulation of anthocyanin accumulation is unknown. Here, we show that under far-red light, JA promotes anthocyanin accumulation in a phyA signaling pathway-dependent manner. The phyA mutant is hyposensitive to jasmonic acid analog methyl jasmonic acid (MeJA) under far-red light. The dominant mutant of MYB75, pap1-D, accumulates significantly higher levels of anthocyanin than wild type under far-red light, whereas knockdown of MYBs (MYB75, MYB90, MYB113, and MYB114) through RNAi significantly reduces MeJA promotion of anthocyanin accumulation. The phyA pap1-D double mutant shows reduced responsiveness to MeJA, similar to phyA mutant under far-red light. In darkness, a mutant allele of cop1, cop1-4, shows enhanced responsiveness to MeJA, but pap1-D mutant is barely responsive to MeJA. Upon MeJA application, the cop1-4 pap1-D double mutant accumulates considerably higher levels of anthocyanin than cop1-4 in darkness. Protein studies indicate that MYB75 protein is stabilized by white light and far-red light. Further gene expression studies suggest that MeJA promotes the expression of DFR, UF3GT, and LDOX genes in a phyA- and MYB75-dependent manner under far-red light. Our findings suggest

  17. Growth and photomorphogenesis of pepper plants under red light-emitting diodes with supplemental blue or far-red lighting

    Science.gov (United States)

    Brown, C. S.; Schuerger, A. C.; Sager, J. C.

    1995-01-01

    Light-emitting diodes (LEDs) are a potential irradiation source for intensive plant culture systems and photobiological research. They have small size, low mass, a long functional life, and narrow spectral output. In this study, we measured the growth and dry matter partitioning of 'Hungarian Wax' pepper (Capsicum annuum L.) plants grown under red LEDs compared with similar plants grown under red LEDs with supplemental blue or far-red radiation or under broad spectrum metal halide (MH) lamps. Additionally, we describe the thermal and spectral characteristics of these sources. The LEDs used in this study had a narrow bandwidth at half peak height (25 nm) and a focused maximum spectral output at 660 nm for the red and 735 nm for the far-red. Near infrared radiation (800 to 3000 nm) was below detection and thermal infrared radiation (3000 to 50,000 nm) was lower in the LEDs compared to the MH source. Although the red to far-red ratio varied considerably, the calculated phytochrome photostationary state (phi) was only slightly different between the radiation sources. Plant biomass was reduced when peppers were grown under red LEDs in the absence of blue wavelengths compared to plants grown under supplemental blue fluorescent lamps or MH lamps. The addition of far-red radiation resulted in taller plants with greater stem mass than red LEDs alone. There were fewer leaves under red or red plus far-red radiation than with lamps producing blue wavelengths. These results indicate that red LEDs may be suitable, in proper combination with other wavelengths of light, for the culture of plants in tightly controlled environments such as space-based plant culture systems.

  18. Increased Depth of Cellular Imaging in the Intact Lung Using Far-Red and Near-Infrared Fluorescent Probes

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available Scattering of shorter-wavelength visible light limits the fluorescence imaging depth of thick specimens such as whole organs. In this study, we report the use of four newly synthesized near-infrared and far-red fluorescence probes (excitation/emission, in nm: 644/670; 683/707; 786/814; 824/834 to image tumor cells in the subpleural vasculature of the intact rat lungs. Transpelural imaging of tumor cells labeled with long-wavelength probes and expressing green fluorescent protein (GFP; excitation/emission 488/507 nm was done in the intact rat lung after perfusate administration or intravenous injection. Our results show that the average optimum imaging depth for the long-wavelength probes is higher ( 27.8±0.7 μ m than for GFP ( 20±0.5 μ m; p=0.008 ; n=50 , corresponding to a 40% increase in the volume of tissue accessible for high-resolution imaging. The maximum depth of cell visualization was significantly improved with the novel dyes ( 36.4±1 μ m from the pleural surface compared with GFP ( 30.1±0.5 μ m; p=0.01 ; n=50 . Stable binding of the long-wavelength vital dyes to the plasma membrane also permitted in vivo tracking of injected tumor cells in the pulmonary vasculature. These probes offer a significant improvement in the imaging quality of in situ biological processes in the deeper regions of intact lungs.

  19. Quantification of non-QB-reducing centers in leaves using a far-red pre-illumination.

    Science.gov (United States)

    Schansker, Gert; Strasser, Reto J

    2005-06-01

    An alternative approach to quantification of the contribution of non-QB-reducing centers to Chl a fluorescence induction curve is proposed. The experimental protocol consists of a far-red pre-illumination followed by a strong red pulse to determine the fluorescence rise kinetics. The far-red pre-illumination induces an increase in the initial fluorescence level (F(25 micros)) that saturates at low light intensities indicating that no light intensity-dependent accumulation of QA - occurs. Far-red light-dose response curves for the F(25 micros)-increase give no indication of superimposed period-4 oscillations. F(25 micros)-dark-adaptation kinetics following a far-red pre-pulse, reveal two components: a faster one with a half-time of a few seconds and a slower component with a half-time of around 100 s. The faster phase is due to the non-QB-reducing centers that re-open by recombination between QA - and the S-states on the donor side. The slower phase is due to the recombination between QB - and the donor side in active PS II reaction centers. The pre-illumination-induced increase of the F(25 micros)-level represents about 4-5% of the variable fluorescence for pea leaves ( approximately 2.5% equilibrium effect and 1.8-3.0% non-QB-reducing centers). For the other plant species tested these values were very similar. The implications of these values will be discussed.

  20. Spatially controlled fabrication of a bright fluorescent nanodiamond-array with enhanced far-red Si-V luminescence.

    Science.gov (United States)

    Singh, Sonal; Thomas, Vinoy; Martyshkin, Dmitry; Kozlovskaya, Veronika; Kharlampieva, Eugenia; Catledge, Shane A

    2014-01-31

    We demonstrate a novel approach to precisely pattern fluorescent nanodiamond-arrays with enhanced far-red intense photostable luminescence from silicon-vacancy (Si-V) defect centers. The precision-patterned pre-growth seeding of nanodiamonds is achieved by a scanning probe 'dip-pen' nanolithography technique using electrostatically driven transfer of nanodiamonds from 'inked' cantilevers to a UV-treated hydrophilic SiO2 substrate. The enhanced emission from nanodiamond dots in the far-red is achieved by incorporating Si-V defect centers in a subsequent chemical vapor deposition treatment. The development of a suitable nanodiamond ink and mechanism of ink transport, and the effect of humidity and dwell time on nanodiamond patterning are investigated. The precision patterning of as-printed (pre-CVD) arrays with dot diameter and dot height as small as 735 nm ± 27 nm and 61 nm ± 3 nm, respectively, and CVD-treated fluorescent ND-arrays with consistently patterned dots having diameter and height as small as 820 nm ± 20 nm and, 245 nm ± 23 nm, respectively, using 1 s dwell time and 30% RH is successfully achieved. We anticipate that the far-red intense photostable luminescence (~738 nm) observed from Si-V defect centers integrated in spatially arranged nanodiamonds could be beneficial for the development of next generation fluorescence-based devices and applications.

  1. Spatially controlled fabrication of a bright fluorescent nanodiamond-array with enhanced far-red Si-V luminescence

    Science.gov (United States)

    Singh, Sonal; Thomas, Vinoy; Martyshkin, Dmitry; Kozlovskaya, Veronika; Kharlampieva, Eugenia; Catledge, Shane A.

    2014-01-01

    We demonstrate a novel approach to precisely pattern fluorescent nanodiamond-arrays with enhanced far-red intense photostable luminescence from silicon-vacancy (Si-V) defect centers. The precision-patterned pre-growth seeding of nanodiamonds is achieved by a scanning probe ‘dip-pen’ nanolithography technique using electrostatically driven transfer of nanodiamonds from ‘inked’ cantilevers to a UV-treated hydrophilic SiO2 substrate. The enhanced emission from nanodiamond dots in the far-red is achieved by incorporating Si-V defect centers in a subsequent chemical vapor deposition treatment. The development of a suitable nanodiamond ink and mechanism of ink transport, and the effect of humidity and dwell time on nanodiamond patterning are investigated. The precision patterning of as-printed (pre-CVD) arrays with dot diameter and dot height as small as 735 nm ± 27 nm and 61 nm ± 3 nm, respectively, and CVD-treated fluorescent ND-arrays with consistently patterned dots having diameter and height as small as 820 nm ± 20 nm and, 245 nm ± 23 nm, respectively, using 1 s dwell time and 30% RH is successfully achieved. We anticipate that the far-red intense photostable luminescence (˜738 nm) observed from Si-V defect centers integrated in spatially arranged nanodiamonds could be beneficial for the development of next generation fluorescence-based devices and applications.

  2. Optimal Radiologic Report

    Directory of Open Access Journals (Sweden)

    Esmaeel Shokrollahi

    2010-05-01

    Full Text Available The radiological report is the medical document that qualifies the radiologist as a clinician and as a specialist, because through it radiologists expresse their professionalism."nThere is nothing more debatable than the report and how it should be written. It is conditioned by many variables that derive from the wide variety of sensitivities and personal or local cultures. In addition, there has never been a specific school in which these rules are taught."nIn the assessment of each written material, two things are explained:"n1. Methodology of the writing process itself as an act"n2. Characters of the written material "nIn assessing the method of writing a radiological report, two dimensions are discussed: "n1. Hardware: including data gathering, their processing and preparing them to be seen, the me-thod of reporting, conditions of workspace, instru-ments and all the physical parts of the work."n2. Software: how someone watches the images, me-thodology of thought and logical reasoning, and ultimately, how pictures are transferred to understandable, meaningful and useful written material."nIn assessing the characters of the written material itself, we should note:"n1. The configuration includes the structure of the words and grammar, style of writing, order of things to come after each other. This is the carrier of the content. "n2. The content is the main reason of the writing which contains the whole meaning and all parts of what one wants his or her audience to get from the note.

  3. The influence of far-red light on attributes of green bell pepper fruits (Capsicum annuum l. during storage

    Directory of Open Access Journals (Sweden)

    Anca MIHALY COZMUTA

    2016-12-01

    Full Text Available Green bell peppers fruits, stored for 1 month at 8oC and 455% relative humidity in Far-Red light (FRL and darkness respectively, were investigated in terms of physical, chemical and microbiological parameters. The exposure to FRL slows down the water loss from fruits by stimulating the surface wax biosynthesis into a higher specific amount and hydrophobic nature and reducing the apertures, diameters of the pericarp cells, intercellular walls and dermal layer thicknesses. The higher level of catalase enzyme in the FRL-exposed fruits resulted in lower chilling injury index in comparison with the one in fruits exposed to darkness. FRL has favorable effect on chlorophyll and carotenoids accumulation rates. The multiplication of yeasts and molds on the surface of FRL-exposed bell peppers was significantly delayed as compared to the multiplication on the surface of the darkness-exposed bell peppers.

  4. In vivo spectroscopic photoacoustic tomography imaging of a far red fluorescent protein expressed in the exocrine pancreas of adult zebrafish

    Science.gov (United States)

    Liu, Mengyang; Schmitner, Nicole; Sandrian, Michelle G.; Zabihian, Behrooz; Hermann, Boris; Salvenmoser, Willi; Meyer, Dirk; Drexler, Wolfgang

    2014-03-01

    Fluorescent proteins brought a revolution in life sciences and biological research in that they make a powerful tool for researchers to study not only the structural and morphological information, but also dynamic and functional information in living cells and organisms. While green fluorescent proteins (GFP) have become a common labeling tool, red-shifted or even near infrared fluorescent proteins are becoming the research focus due to the fact that longer excitation wavelengths are more suitable for deep tissue imaging. In this study, E2-Crimson, a far red fluorescent protein whose excitation wavelength is 611 nm, was genetically expressed in the exocrine pancreas of adult zebrafish. Using spectroscopic all optical detection photoacoustic tomography, we mapped the distribution of E2-Crimson in 3D after imaging the transgenic zebrafish in vivo using two different wavelengths. With complementary morphological information provided by imaging the same fish using a spectral domain optical coherence tomography system, the E2-Crimson distribution acquired from spectroscopic photoacoustic tomography was confirmed in 2D by epifluorescence microscopy and in 3D by histology. To the authors' knowledge, this is the first time a far red fluorescent protein is imaged in vivo by spectroscopic photoacoustic tomography. Due to the regeneration feature of zebrafish pancreas, this work preludes the longitudinal studies of animal models of diseases such as pancreatitis by spectroscopic photoacoustic tomography. Since the effective penetration depth of photoacoustic tomography is beyond the transport mean free path length, other E2-Crimson labeled inner organs will also be able to be studied dynamically using spectroscopic photoacoustic tomography.

  5. Far-red/near-infrared fluorescence light-up probes for specific in vitro and in vivo imaging of a tumour-related protein

    Science.gov (United States)

    Chen, Chao; Hua, Yongquan; Hu, Yawen; Fang, Yuan; Ji, Shenglu; Yang, Zhimou; Ou, Caiwen; Kong, Deling; Ding, Dan

    2016-03-01

    As lysosomal protein transmembrane 4 beta (LAPTM4B) is an important biomarker for many solid tumours, development of small-molecule fluorescence light-up probes for detection and imaging of LAPTM4B proteins is particularly valuable. In this work, we reported the design and synthesis of a far-red/near-infrared (FR/NIR) fluorescence light-up probe DBT-2EEGIHGHHIISVG, which could specifically visualize LAPTM4B proteins in cancer cells and tumour-bearing live mice. DBT-2EEGIHGHHIISVG was synthesized by the conjugation of two LAPTM4B-binding peptide ligands (EEGIHGHHIISVG) with one environment-sensitive fluorogen, 4,7-di(thiophen-2-yl)-2,1,3-benzothiadiazole (DBT). Owing to the intramolecular charge transfer character of DBT, DBT-2EEGIHGHHIISVG is weakly emissive in aqueous solution, but switches to fluoresce upon LAPTM4B proteins specifically bind to the peptide ligand of the probe, which provide the DBT with hydrophobic microenvironment, greatly reducing its charge transfer effect with water. It is found that DBT-2EEGIHGHHIISVG can achieve targeted imaging of LAPTM4B proteins in HepG2 cancer cells and visualize LAPTM4B protein-expressed tumour tissues of live mice in a selective and high-contrast manner.

  6. Gross Primary Production of a Wheat Canopy Relates Stronger to Far Red Than to Red Solar-Induced Chlorophyll Fluorescence

    Directory of Open Access Journals (Sweden)

    Yves Goulas

    2017-01-01

    Full Text Available Sun-induced chlorophyll fluorescence (SIF is a radiation flux emitted by chlorophyll molecules in the red (RSIF and far red region (FRSIF, and is considered as a potential indicator of the functional state of photosynthesis in remote sensing applications. Recently, ground studies and space observations have demonstrated a strong empirical linear relationship between FRSIF and carbon uptake through photosynthesis (GPP, gross primary production. In this study, we investigated the potential of RSIF and FRSIF to represent the functional status of photosynthesis at canopy level on a wheat crop. RSIF and FRSIF were continuously measured in the O2-B (SIF687 and O2-A bands (SIF760 at a high frequency rate from a nadir view at a height of 21 m, simultaneously with carbon uptake using eddy covariance (EC techniques. The relative fluorescence yield (Fyield and the photochemical yield were acquired at leaf level using active fluorescence measurements. SIF was normalized with photosynthetically active radiation (PAR to derive apparent spectral fluorescence yields (ASFY687, ASFY760. At the diurnal scale, we found limited variations of ASFY687 and ASFY760 during sunny days. We also did not find any link between Fyield and light use efficiency (LUE derived from EC, which would prevent SIF from indicating LUE changes. The coefficient of determination ( r 2 of the linear regression between SIF and GPP is found to be highly variable, depending on the emission wavelength, the time scale of observation, sky conditions, and the phenological stage. Despite its photosystem II (PSII origin, SIF687 correlates less than SIF760 with GPP in any cases. The strongest SIF–GPP relationship was found for SIF760 during canopy growth. When canopy is in a steady state, SIF687 and SIF760 are almost as effective as PAR in predicting GPP. Our results imply some constraints in the use of simple linear relationships to infer GPP from SIF, as they are expected to be better predictive

  7. Meso-ester and carboxylic acid substituted BODIPYs with far-red and near-infrared emission for bioimaging applications

    KAUST Repository

    Ni, Yong

    2014-01-21

    A series of meso-ester-substituted BODIPY derivatives 1-6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core (3-6) become partially soluble in water, and their absorptions and emissions are located in the far-red or near-infrared region. Three synthetic approaches are attempted to access the meso-carboxylic acid (COOH)-substituted BODIPYs 7 and 8 from the meso-ester-substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso-COOH-substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time-dependent density functional theory calculations are conducted to understand the structure-optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso-ester-substituted BODIPYs (1 and 3-6) and one of the meso-COOH-substituted BODIPYs (8) are very membrane-permeable. These features make these meso-ester- and meso-COOH-substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. para-Dialkylaminophenyl Dyes for Efficient Nanocrystalline TiO2 Sensitization in Far-red Region

    Institute of Scientific and Technical Information of China (English)

    LI, Chao; ZHOU, Jia-Hong; CHEN, Jing-Rong; CHEN, You-Sheng; ZHANG, Xue-Hua; DING, Hui-Ying; WANG, Wei-Bo; WANG, Xue-Song; ZHANG, Bao-Wen

    2006-01-01

    Four para-dialkylaminophenyl (PDAAP1-PDAAP4) bearing carboxyl groups were studied for application to the dye-sensitized solar cells (DSC). It was found the short spacer CH2 between carboxyl and dialkylaminophenyl chromophore in PDAAP3 and PDAAP4 led to highly efficient monochromatic incident photon-to-current conversion efficiencies (IPCE), however the long alkyl group C4H9 attached on aniline moieties in PDAAP2 and PDAAP4favored improvement of open-circuit photovoltage. Thus, the solar cell sensitized by PDAAP4, having both short carboxyl groups CH2COOH and long alkyl groups C4H9, exhibited the IPCE maximum of 73% at 670 nm and overall energy conversion efficiency ηof 3.06%, representing the highest IPCE and ηvalues so far in dialkylaminophenyl-based organic dye-sensitized semiconductor solar cells. Taking advantage of the highly efficient sensitizing ability of PDAAP4 in far-red region, the data of IPCE above 630 nm of the solar cells were improved greatly by cosensitization with both N3 and PDAAP4. The influences of the TiO2 film thickness and the concentration of4-tert-butylpyridine (TBP) in electrolyte were also investigated.

  9. Impact of blue, red, and far-red light treatments on gene expression and steviol glycoside accumulation in Stevia rebaudiana.

    Science.gov (United States)

    Yoneda, Yuki; Nakashima, Hiroshi; Miyasaka, Juro; Ohdoi, Katsuaki; Shimizu, Hiroshi

    2017-02-15

    Stevia rebaudiana (Bertoni) Bertoni is a plant that biosynthesizes a group of natural sweeteners that are up to approximately 400 times sweeter than sucrose. The sweetening components of S. rebaudiana are steviol glycosides (SGs) that partially share their biosynthesis pathway with gibberellins (GAs). However, the molecular mechanisms through which SGs levels can be improved have not been studied. Therefore, transcription levels of several SG biosynthesis-related genes were analyzed under several light treatments involved in GA biosynthesis. We detected higher transcription of UGT85C2, which is one of the UDP-glycosyltransferases (UGTs) involved in catalyzing the sugar-transfer reaction, under red/far-red (R/FR) 1.22 light-emitting diodes (LEDs) and blue LEDs treatment. In this study, it was demonstrated that transcription levels of SG-related genes and the SGs content are affected by light treatments known to affect the GA contents. It is expected that this approach could serve as a practical way to increase SG contents using specific light treatments.

  10. An optimized triple modality reporter for quantitative in vivo tumor imaging and therapy evaluation.

    Science.gov (United States)

    Levin, Rachel A; Felsen, Csilla N; Yang, Jin; Lin, John Y; Whitney, Michael A; Nguyen, Quyen T; Tsien, Roger Y

    2014-01-01

    We present an optimized triple modality reporter construct combining a far-red fluorescent protein (E2-Crimson), enhanced firefly luciferase enzyme (Luc2), and truncated wild type herpes simplex virus I thymidine kinase (wttk) that allows for sensitive, long-term tracking of tumor growth in vivo by fluorescence, bioluminescence, and positron emission tomography. Two human cancer cell lines (MDA-MB-231 breast cancer and HT-1080 fibrosarcoma cancer) were successfully transduced to express this triple modality reporter. Fluorescence and bioluminescence imaging of the triple modality reporter were used to accurately quantify the therapeutic responses of MDA-MB-231 tumors to the chemotherapeutic agent monomethyl auristatin E in vivo in athymic nude mice. Positive correlation was observed between the fluorescence and bioluminescence signals, and these signals were also positively correlated with the ex vivo tumor weights. This is the first reported use of both fluorescence and bioluminescence signals from a multi-modality reporter construct to measure drug efficacy in vivo.

  11. An optimized triple modality reporter for quantitative in vivo tumor imaging and therapy evaluation.

    Directory of Open Access Journals (Sweden)

    Rachel A Levin

    Full Text Available We present an optimized triple modality reporter construct combining a far-red fluorescent protein (E2-Crimson, enhanced firefly luciferase enzyme (Luc2, and truncated wild type herpes simplex virus I thymidine kinase (wttk that allows for sensitive, long-term tracking of tumor growth in vivo by fluorescence, bioluminescence, and positron emission tomography. Two human cancer cell lines (MDA-MB-231 breast cancer and HT-1080 fibrosarcoma cancer were successfully transduced to express this triple modality reporter. Fluorescence and bioluminescence imaging of the triple modality reporter were used to accurately quantify the therapeutic responses of MDA-MB-231 tumors to the chemotherapeutic agent monomethyl auristatin E in vivo in athymic nude mice. Positive correlation was observed between the fluorescence and bioluminescence signals, and these signals were also positively correlated with the ex vivo tumor weights. This is the first reported use of both fluorescence and bioluminescence signals from a multi-modality reporter construct to measure drug efficacy in vivo.

  12. Loss of the ETR1 ethylene receptor reduces the inhibitory effect of far-red light and darkness on seed germination of Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Rebecca L Wilson

    2014-08-01

    Full Text Available When exposed to far-red light followed by darkness, wild-type Arabidopsis thaliana seeds fail to germinate or germinate very poorly. We have previously shown that the ethylene receptor ETR1 (ETHYLENE RESPONSE1 inhibits and ETR2 stimulates seed germination of Arabidopsis during salt stress. This function of ETR1 requires the full-length receptor. These roles are independent of ethylene levels and sensitivity and are mainly mediated by a change in abscisic acid (ABA sensitivity. In the current study we find that etr1-6 and etr1-7 loss-of-function mutant seeds germinate better than wild-type seeds after illumination with far-red light or when germinated in the dark indicating an inhibitory role for ETR1. Surprisingly, this function of ETR1 does not require the receiver domain. No differences between these mutants and wild-type are seen when germination proceeds after treatment with white, blue, green, or red light. Loss of any of the other four ethylene receptor isoforms has no measurable effect on germination after far-red light treatment. An analysis of the transcript abundance for genes encoding ABA and gibberellic acid (GA metabolic enzymes indicates that etr1-6 mutants may produce more GA and less ABA than wild-type seeds after illumination with far-red light which correlates with the better germination of the mutants. Epistasis analysis suggests that ETR1 may genetically interact with the phytochromes (phy, PHYA and PHYB to control germination and growth. This study shows that of the five ethylene receptor isoforms in Arabidopsis, ETR1 has a unique role in modulating the effects of red and far-red light on plant growth and development.

  13. Loss of the ETR1 ethylene receptor reduces the inhibitory effect of far-red light and darkness on seed germination of Arabidopsis thaliana.

    Science.gov (United States)

    Wilson, Rebecca L; Bakshi, Arkadipta; Binder, Brad M

    2014-01-01

    When exposed to far-red light followed by darkness, wild-type Arabidopsis thaliana seeds fail to germinate or germinate very poorly. We have previously shown that the ethylene receptor ETR1 (ETHYLENE RESPONSE1) inhibits and ETR2 stimulates seed germination of Arabidopsis during salt stress. This function of ETR1 requires the full-length receptor. These roles are independent of ethylene levels and sensitivity and are mainly mediated by a change in abscisic acid (ABA) sensitivity. In the current study we find that etr1-6 and etr1-7 loss-of-function mutant seeds germinate better than wild-type seeds after illumination with far-red light or when germinated in the dark indicating an inhibitory role for ETR1. Surprisingly, this function of ETR1 does not require the receiver domain. No differences between these mutants and wild-type are seen when germination proceeds after treatment with white, blue, green, or red light. Loss of any of the other four ethylene receptor isoforms has no measurable effect on germination after far-red light treatment. An analysis of the transcript abundance for genes encoding ABA and gibberellic acid (GA) metabolic enzymes indicates that etr1-6 mutants may produce more GA and less ABA than wild-type seeds after illumination with far-red light which correlates with the better germination of the mutants. Epistasis analysis suggests that ETR1 may genetically interact with the phytochromes (phy), PHYA and PHYB to control germination and growth. This study shows that of the five ethylene receptor isoforms in Arabidopsis, ETR1 has a unique role in modulating the effects of red and far-red light on plant growth and development.

  14. MAP-kinase activity in etiolated Cucumis sativus cotyledons: the effect of red and far-red light irradiation.

    Science.gov (United States)

    Alvarez-Flórez, Fagua; Vidal, Dolors; Simón, Esther

    2013-02-01

    Phytochrome (phy) signalling in plants may be transduced through protein phosphorylation. Mitogen-activated protein kinase (MAP-kinase, MAPK) activity and the effect of R (red) and FR (far-red) light irradiation on MAPK activity were studied in etiolated Cucumis sativus L. cotyledons. By in vitro protein phosphorylation and in-gel assays with myelin basic protein (MBP), a protein band (between 48 and 45 kDa) with MAPK-like activity was detected. The addition to the phosphorylation buffer of specific protein phosphatase (PTP) inhibitors (Na(3)VO(4) and NaF) and genistein, apigenin or PD98059 as MAPK inhibitors allowed us to confirm the MAPK activity of the protein band. Irradiation of etiolated cotyledons with FR light for 5, 10 or 60 min rapidly and transiently stimulated the MAPK activity of the protein band. This suggests that there was a very low fluence response (VLFR) of phys. In addition, 15 min of R light irradiation or a sequential treatment of 15 min of R plus 5 min of FR also increased MAPK activity. The stimulatory effect of R light was also attributed to the same photoreceptor, which suggests that MAPKs are involved in phytochrome signal transduction. Protein immunoprecipitation and immunoblotting analysis with the polyclonal antibody anti-pERK1/2 (Tyr 204) and the monoclonal antibody anti-phosphotyrosine PY20 allowed us to recognize the above mentioned protein band as two proteins with molecular masses (M(r)) of approximately 47 and 45 kDa, and MAPK activity. The biochemical and immunological properties showed by the proteins detected indicated that they were members of the MAPK family phosphorylated in tyrosine residues.

  15. A Rice Phytochrome A in Arabidopsis: The Role of the N-terminus under red and far-red light

    Institute of Scientific and Technical Information of China (English)

    Julia Kneissl; Tomoko Shinomura; Masaki Furuya; Cordelia Bolle

    2008-01-01

    The phytochrome (phy)A and phyB photoreceptors mediate three photobiological response modes in plants;whereas phyA can mediate the very-Iow-fluence response (VLFR), the high-irradiance response (HIR) and, to some extent, the low fluence response (LFR), phyB and other type Ⅱ phytochromes only mediate the LFR. To investigate to what level a rice phyA can complement for Arabidopsis phyA or phyB function and to evaluate the role of the serine residues in the first 20 amino acids of the N-terminus of phyA, we examined VLFRo LFR, and HIR responses in phyB and phyAphyB mutant plants transformed with rice PHYA cDNA or a mutant rice PHYA cDNA in which the first 10 serine residues were mutated to alanines (phyA SA). Utilizing mutants without endogenous phyB allowed the evaluation of red-light-derived responses sensed by the rice phyA. In summary, the WT rice phyA could complement VLFR and LFR responses such as inhibition of hypocotyl elongation under pulses of FR or continuous R light, induction of flowering and leaf expansion, whereas the phyA SA was more specific for HIR responses (e.g. inhibition of hypocotyl elongation and anthocyanin accumulation under continuous far-red light). As the N-terminal serines can no longer be phosphorylated in the phyA SA mutant, this suggests a role for phosphorylation discriminating between the different phyA-dependent responses. The efficacy of the rice phyA expressed in Arabidopsis was dependent upon the developmental age of the plants analyzed and on the physiological response, suggesting a stage-dependent downstream modulation of phytochrome signaling.

  16. THE STIMULATING EFFECT OF LASER RED LIGHT, FAR RED LIGHT AND SODIUM CARBONATE AT THE INITIAL STAGES OF BARLEY ONTOGENESIS

    Directory of Open Access Journals (Sweden)

    G. P. Dudin

    2014-01-01

    Full Text Available Summary. Modern ecological state of the environment and human unhealthy diet cause many diseases. A healthy diet is the one that contains adequate amounts of proteins, fats, carbohydrates, vitamins, macronutrients and micronutrients. Photosynthesis i. e. the process by which plants produce organic compounds from carbon dioxide and water, is the source of life, the source of evolution and proliferation of life forms on the Earth. Thus, the juice made from sprouted barley provides physiologically active chlorophyll, macronutrients and micronutrients, vitamins А, В2 , В3 , В5 , В6 , В8 , Е and К. It is well known that light from a red laser with a wavelength of 638.2 nm has a stimulating action on the germination energy, germination ability and productivity of seeds, and on the crop yields. Therefore, this research is of primary importance today. The research result produced a sharp decline in plant vigor and germinating capacity of barley when soaking in 1n sodium carbonate solution, as well as changes in the ratio of potassium-sodium balance in plants. Thus at lower concentrations of sodium carbonate and 0.1 n sodium increasing of pigment content in barley is observed on the seventh day. The red laser light has a similar stimulating action: the chlorophyll content of barley plants increased after the red laser treatment of barley seeds. However, the chlorophyll contents were depressed when the seeds were exposed to far red light with wavelengths of 754±10 nm. Using these factors, one can manage the content of chlorophyll and sodium-potassium balance in the initial stages of barley ontogenesis in the technology of barley juice or the powder for a healthy and proper human diet.

  17. Photoprotection of PSI by Far-Red Light Against the Fluctuating Light-Induced Photoinhibition in Arabidopsis thaliana and Field-Grown Plants.

    Science.gov (United States)

    Kono, Masaru; Yamori, Wataru; Suzuki, Yoshihiro; Terashima, Ichiro

    2017-01-01

    It has been reported that PSI photoinhibition is induced even in wild-type plants of Arabidopsis thaliana, rice and other species by exposure of leaves to fluctuating light (FL) for a few hours. Because plants are exposed to FL in nature, they must possess protective mechanisms against the FL-induced photodamage. Here, using A. thaliana grown at various irradiances, we examined PSI photoprotection by far-red (FR) light at intensities comparable with those observed in nature. Dark-treated leaves were illuminated by red FL alternating high/low light at 1,200/30 µmol m-2 s-1 for 800 ms/10 s. By this FL treatment without FR light for 120 min, the level of photo-oxidizable P700 was decreased by 30% even in the plants grown at high irradiances. The addition of continuous FR light during the FL suppressed this damage almost completely. With FR light, P700 was kept in a more oxidized state in both low- and high-light phases. The protective effect of FR light was diminished more in mutants of the NADH dehydrogenase-like complex (NDH)-mediated cyclic electron flow around PSI (CEF-PSI) than in the PGR5 (proton gradient regulation 5)-mediated CEF-PSI, indicating that the NDH-mediated CEF-PSI would be a major contributor to PSI photoprotection in the presence of FR light. We also confirmed that PSI photoinhibition decreased with the increase in growth irradiance in A. thaliana and field-grown plants, and that this PSI photodamage was largely suppressed by addition of FR light. These results clearly indicate that the most effective PSI protection is realized in the presence of FR light. © The Author 2017. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  18. Morphology and Hydraulic Architecture of Vitis vinifera L. cv. Syrah and Torrontés Riojano Plants Are Unaffected by Variations in Red to Far-Red Ratio

    OpenAIRE

    González, Carina Verónica; Jofré, María Florencia; Vila, Hernán F.; Stoffel, Markus; Bottini, Rubén; Giordano, Carla Valeria

    2016-01-01

    Plants have evolved an array of specific photoreceptors to acclimate to the light environment. By sensing light signals, photoreceptors modulate plant morphology, carbon- and water-physiology, crop yield and quality of harvestable organs, among other responses. Many cultural practices and crop management decisions alter light quantity and quality perceived by plants cultivated in the field. Under full sunlight, phytochromes perceive high red to far red ratios (R:FR; 1.1), whereas overhead or ...

  19. Fluorescence Imaging in the Red and Far-Red Region during Growth of Sunflower Plantlets. Diagnosis of the Early Infection by the Parasite Orobanche cumana.

    Science.gov (United States)

    Ortiz-Bustos, Carmen M; Pérez-Bueno, María L; Barón, Matilde; Molinero-Ruiz, Leire

    2016-01-01

    Broomrape, caused by the root holoparasite Orobanche cumana, is the main biotic constraint to sunflower oil production worldwide. By the time broomrape emerges, most of the metabolic imbalance has been produced by O. cumana to sunflower plants. UV-induced multicolor fluorescence imaging (MCFI) provides information on the fluorescence emitted by chlorophyll (Chl) a of plants in the spectral bands with peaks near 680 nm (red, F680) and 740 nm (far-red, F740). In this work MCFI was extensively applied to sunflowers, either healthy or parasitized plants, for the first time. The distribution of red and far-red fluorescence was analyzed in healthy sunflower grown in pots under greenhouse conditions. Fluorescence patterns were analyzed across the leaf surface and throughout the plant by comparing the first four leaf pairs (LPs) between the second and fifth week of growth. Similar fluorescence patterns, with a delay of 3 or 4 days between them, were obtained for LPs of healthy sunflower, showing that red and far-red fluorescence varied with the developmental stage of the leaf. The use of F680 and F740 as indicators of sunflower infection by O. cumana during underground development stages of the parasite was also evaluated under similar experimental conditions. Early increases in F680 and F740 as well as decreases in F680/F740 were detected upon infection by O. cumana. Significant differences between inoculated and control plants depended on the LP that was considered at any time. Measurements of Chl contents and final total Chl content supported the results of MCFI, but they were less sensitive in differentiating healthy from inoculated plants. Sunflower infection was confirmed by the presence of broomrape nodules in the roots at the end of the experiment. The potential of MCFI in the red and far-red region for an early detection of O. cumana infection in sunflower was revealed. This technique might have a particular interest for early phenotyping in sunflower breeding

  20. Red:far-red light conditions affect the emission of volatile organic compounds from barley (Hordeum vulgare), leading to altered biomass allocation in neighbouring plants.

    Science.gov (United States)

    Kegge, Wouter; Ninkovic, Velemir; Glinwood, Robert; Welschen, Rob A M; Voesenek, Laurentius A C J; Pierik, Ronald

    2015-05-01

    Volatile organic compounds (VOCs) play various roles in plant-plant interactions, and constitutively produced VOCs might act as a cue to sense neighbouring plants. Previous studies have shown that VOCs emitted from the barley (Hordeum vulgare) cultivar 'Alva' cause changes in biomass allocation in plants of the cultivar 'Kara'. Other studies have shown that shading and the low red:far-red (R:FR) conditions that prevail at high plant densities can reduce the quantity and alter the composition of the VOCs emitted by Arabidopsis thaliana, but whether this affects plant-plant signalling remains unknown. This study therefore examines the effects of far-red light enrichment on VOC emissions and plant-plant signalling between 'Alva' and 'Kara'. The proximity of neighbouring plants was mimicked by supplemental far-red light treatment of VOC emitter plants of barley grown in growth chambers. Volatiles emitted by 'Alva' under control and far-red light-enriched conditions were analysed using gas chromatography-mass spectrometry (GC-MS). 'Kara' plants were exposed to the VOC blend emitted by the 'Alva' plants that were subjected to either of the light treatments. Dry matter partitioning, leaf area, stem and total root length were determined for 'Kara' plants exposed to 'Alva' VOCs, and also for 'Alva' plants exposed to either control or far-red-enriched light treatments. Total VOC emissions by 'Alva' were reduced under low R:FR conditions compared with control light conditions, although individual volatile compounds were found to be either suppressed, induced or not affected by R:FR. The altered composition of the VOC blend emitted by 'Alva' plants exposed to low R:FR was found to affect carbon allocation in receiver plants of 'Kara'. The results indicate that changes in R:FR light conditions influence the emissions of VOCs in barley, and that these altered emissions affect VOC-mediated plant-plant interactions. © The Author 2015. Published by Oxford University Press on

  1. Anatomical features of pepper plants (Capsicum annuum L.) grown under red light-emitting diodes supplemented with blue or far-red light

    Science.gov (United States)

    Schuerger, A. C.; Brown, C. S.; Stryjewski, E. C.

    1997-01-01

    Pepper plants (Capsicum annuum L. cv., Hungarian Wax) were grown under metal halide (MH) lamps or light-emitting diode (LED) arrays with different spectra to determine the effects of light quality on plant anatomy of leaves and stems. One LED (660) array supplied 90% red light at 660 nm (25nm band-width at half-peak height) and 1% far-red light between 700-800nm. A second LED (660/735) array supplied 83% red light at 660nm and 17% far-red light at 735nm (25nm band-width at half-peak height). A third LED (660/blue) array supplied 98% red light at 660nm, 1% blue light between 350-550nm, and 1% far-red light between 700-800nm. Control plants were grown under broad spectrum metal halide lamps. Plants were gron at a mean photon flux (300-800nm) of 330 micromol m-2 s-1 under a 12 h day-night photoperiod. Significant anatomical changes in stem and leaf morphologies were observed in plants grown under the LED arrays compared to plants grown under the broad-spectrum MH lamp. Cross-sectional areas of pepper stems, thickness of secondary xylem, numbers of intraxylary phloem bundles in the periphery of stem pith tissues, leaf thickness, numbers of choloplasts per palisade mesophyll cell, and thickness of palisade and spongy mesophyll tissues were greatest in peppers grown under MH lamps, intermediate in plants grown under the 660/blue LED array, and lowest in peppers grown under the 660 or 660/735 LED arrays. Most anatomical features of pepper stems and leaves were similar among plants grown under 660 or 660/735 LED arrays. The effects of spectral quality on anatomical changes in stem and leaf tissues of peppers generally correlate to the amount of blue light present in the primary light source.

  2. Stress responsive gene CIPK14 is involved in phytochrome A-mediated far-red light inhibition of greening in Arabidopsis

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this study, we show that CIPK14,a stress responsive CBL-interacting protein kinase gene,is involved in phytochrome A-mediated far-red light inhibition of greening in Arabidopsis seedlings. The CIPK14-impairment mutant cipk14 grown in continuous far-red (FR) light did not show greening when exposed to white light illumination for 15 h. By contrast, the FR-grown phytochrome A null mutant phyA greened within 0.5 h of exposure to white light. Although greening of Col-4 (wild-type) was not completely abolished by FR, it exhibited a significantly decreased greening capacity compared with that of phyA. Further analyses demonstrated that the expression of protochlorophyllide reductase (POR) genes was correlated with the greening ability of the genotypes. In addition, CIPK14 appeared to be regulated by both the circadian clock and PhyA. Taken together, these results suggest that CIPK14 plays a role in PhyA-mediated FR inhibition of seedling greening, and that a Ca-related kinase may be involved in a previously undefined branch point in the phytochrome A signaling pathway.

  3. Analysis of Red and Far-Red Sun-Induced Chlorophyll Fluorescence and Their Ratio in Different Canopies Based on Observed and Modeled Data

    Directory of Open Access Journals (Sweden)

    Micol Rossini

    2016-05-01

    Full Text Available Sun-induced canopy chlorophyll fluorescence in both the red (FR and far-red (FFR regions was estimated across a range of temporal scales and a range of species from different plant functional types using high resolution radiance spectra collected on the ground. Field measurements were collected with a state-of-the-art spectrometer setup and standardized methodology. Results showed that different plant species were characterized by different fluorescence magnitude. In general, the highest fluorescence emissions were measured in crops followed by broadleaf and then needleleaf species. Red fluorescence values were generally lower than those measured in the far-red region due to the reabsorption of FR by photosynthetic pigments within the canopy layers. Canopy chlorophyll fluorescence was related to plant photosynthetic capacity, but also varied according to leaf and canopy characteristics, such as leaf chlorophyll concentration and Leaf Area Index (LAI. Results gathered from field measurements were compared to radiative transfer model simulations with the Soil-Canopy Observation of Photochemistry and Energy fluxes (SCOPE model. Overall, simulation results confirmed a major contribution of leaf chlorophyll concentration and LAI to the fluorescence signal. However, some discrepancies between simulated and experimental data were found in broadleaf species. These discrepancies may be explained by uncertainties in individual species LAI estimation in mixed forests or by the effect of other model parameters and/or model representation errors. This is the first study showing sun-induced fluorescence experimental data on the variations in the two emission regions and providing quantitative information about the absolute magnitude of fluorescence emission from a range of vegetation types.

  4. First Report of the Simulation Optimization Group

    CERN Document Server

    Rimoldi, A; Dell'Acqua, A; Froidevaux, D; Gianotti, F; Guyot, C; Hinchliffe, I; Jakobs, K; Marshall, Z; Nasati, A; Quarrie, D; Unal, G; Young, C

    2008-01-01

    This is the first report of the ATLAS Simulation Optimization Group, established in June of 2007. This article justifies the selected Geant4 version, physics list, and range cuts to be used by the default ATLAS simulation for initial data taking and beyond. The current status of several projects, including detector description, simulation validation, studies of additional Geant4 parameters, and cavern background, are reported.

  5. Optimism Bias in Fans and Sports Reporters.

    Directory of Open Access Journals (Sweden)

    Bradley C Love

    Full Text Available People are optimistic about their prospects relative to others. However, existing studies can be difficult to interpret because outcomes are not zero-sum. For example, one person avoiding cancer does not necessitate that another person develops cancer. Ideally, optimism bias would be evaluated within a closed formal system to establish with certainty the extent of the bias and the associated environmental factors, such that optimism bias is demonstrated when a population is internally inconsistent. Accordingly, we asked NFL fans to predict how many games teams they liked and disliked would win in the 2015 season. Fans, like ESPN reporters assigned to cover a team, were overly optimistic about their team's prospects. The opposite pattern was found for teams that fans disliked. Optimism may flourish because year-to-year team results are marked by auto-correlation and regression to the group mean (i.e., good teams stay good, but bad teams improve.

  6. Optimism Bias in Fans and Sports Reporters.

    Science.gov (United States)

    Love, Bradley C; Kopeć, Łukasz; Guest, Olivia

    2015-01-01

    People are optimistic about their prospects relative to others. However, existing studies can be difficult to interpret because outcomes are not zero-sum. For example, one person avoiding cancer does not necessitate that another person develops cancer. Ideally, optimism bias would be evaluated within a closed formal system to establish with certainty the extent of the bias and the associated environmental factors, such that optimism bias is demonstrated when a population is internally inconsistent. Accordingly, we asked NFL fans to predict how many games teams they liked and disliked would win in the 2015 season. Fans, like ESPN reporters assigned to cover a team, were overly optimistic about their team's prospects. The opposite pattern was found for teams that fans disliked. Optimism may flourish because year-to-year team results are marked by auto-correlation and regression to the group mean (i.e., good teams stay good, but bad teams improve).

  7. Non-Invasive In Vivo Imaging and Quantification of Tumor Growth and Metastasis in Rats Using Cells Expressing Far-Red Fluorescence Protein.

    Directory of Open Access Journals (Sweden)

    Jon Christensen

    Full Text Available Non-invasive in vivo imaging is emerging as an important tool for basic and preclinical research. Near-infrared (NIR fluorescence dyes and probes have been used for non-invasive optical imaging since in the NIR region absorption and auto fluorescence by body tissue is low, thus permitting for greater penetration depths and high signal to noise ratio. Currently, cell tracking systems rely on labeling cells prior to injection or administering probes targeting the cell population of choice right before imaging. These approaches do not enable imaging of tumor growth, as the cell label is diluted during cell division. In this study we have developed cell lines stably expressing the far-red fluorescence protein E2-Crimson, thus enabling continuous detection and quantification of tumor growth. In a xenograft rat model, we show that E2-Crimson expressing cells can be detected over a 5 week period using optical imaging. Fluorescence intensities correlated with tumor volume and weight and allowed for a reliable and robust quantification of the entire tumor compartment. Using a novel injection regime, the seeding of MDA-MB-231 breast cancer cells in the lungs in a rat model was established and verified.

  8. Self-assembly-induced far-red/near-infrared fluorescence light-up for detecting and visualizing specific protein-Peptide interactions.

    Science.gov (United States)

    Wang, Huaimin; Liu, Jie; Han, Aitian; Xiao, Nannan; Xue, Zhaosheng; Wang, Gang; Long, Jiafu; Kong, Deling; Liu, Bin; Yang, Zhimou; Ding, Dan

    2014-02-25

    Understanding specific protein-peptide interactions could offer a deep insight into the development of therapeutics for many human diseases. In this work, we designed and synthesized a far-red/near-infrared (FR/NIR) fluorescence light-up probe (DBT-2EEGWRESAI) by simply integrating two tax-interacting protein-1 (TIP-1)-specific peptide ligands (EEGWRESAI) with one 4,7-di(thiophen-2-yl)-2,1,3-benzothiadiazole (DBT) unit. We first demonstrated that DBT is an environment-sensitive fluorophore with FR/NIR fluorescence due to its strong charge transfer character in the excited state. Thanks to the environmental sensitivity of DBT, the probe DBT-2EEGWRESAI is very weakly fluorescent in aqueous solution but lights up its fluorescence when the probe specifically binds to TIP-1 protein or polyprotein (ULD-TIP-1 tetramer). It is found that the DBT-2EEGWRESAI/TIP-1 protein and the DBT-2EEGWRESAI/ULD-TIP-1 tetramer could self-assemble into spherical nanocomplexes and a nanofiber network, respectively, which lead to probe fluorescence turn-on through providing DBT with a hydrophobic microenvironment. By virtue of the self-assembly-induced FR/NIR fluorescence turn-on, DBT-2EEGWRESAI can detect and visualize specific protein/polyprotein-peptide interactions in both solution and live bacteria in a high contrast and selective manner.

  9. Tetrameric far-red fluorescent protein as a scaffold to assemble an octavalent peptide nanoprobe for enhanced tumor targeting and intracellular uptake in vivo.

    Science.gov (United States)

    Luo, Haiming; Yang, Jie; Jin, Honglin; Huang, Chuan; Fu, Jianwei; Yang, Fei; Gong, Hui; Zeng, Shaoqun; Luo, Qingming; Zhang, Zhihong

    2011-06-01

    Relatively weak tumor affinities and short retention time in vivo hinder the application of targeting peptides in tumor molecular imaging. Multivalent strategies based on various scaffolds have been utilized to improve the ability of peptide-receptor binding or extend the clearance time of peptide-based probes. Here, we use a tetrameric far-red fluorescent protein (tfRFP) as a scaffold to create a self-assembled octavalent peptide fluorescent nanoprobe (Octa-FNP) using a genetic engineering approach. The multiligand connecting, fluorophore labeling and nanostructure formation of Octa-FNP were performed in one step. In vitro studies showed Octa-FNP is a 10-nm fluorescent probe with excellent serum stability. Cellular uptake of Octa-FNP by human nasopharyngeal cancer 5-8F cells is 15-fold of tetravalent probe, ∼80-fold of monovalent probe and ∼600-fold of nulvalent tfRFP. In vivo enhanced tumor targeting and intracellular uptake of Octa-FNP were confirmed using optical imaging and Western blot analysis. It achieved extremely high contrast of Octa-FNP signal between tumor tissue and normal organs, especially seldom Octa-FNP detected in liver and spleen. Owing to easy preparation, precise structural and functional control, and multivalent effect, Octa-FNP provides a powerful tool for tumor optical molecular imaging and evaluating the targeting ability of numerous peptides in vivo.

  10. Non-Invasive In Vivo Imaging and Quantification of Tumor Growth and Metastasis in Rats Using Cells Expressing Far-Red Fluorescence Protein.

    Science.gov (United States)

    Christensen, Jon; Vonwil, Daniel; Shastri, V Prasad

    2015-01-01

    Non-invasive in vivo imaging is emerging as an important tool for basic and preclinical research. Near-infrared (NIR) fluorescence dyes and probes have been used for non-invasive optical imaging since in the NIR region absorption and auto fluorescence by body tissue is low, thus permitting for greater penetration depths and high signal to noise ratio. Currently, cell tracking systems rely on labeling cells prior to injection or administering probes targeting the cell population of choice right before imaging. These approaches do not enable imaging of tumor growth, as the cell label is diluted during cell division. In this study we have developed cell lines stably expressing the far-red fluorescence protein E2-Crimson, thus enabling continuous detection and quantification of tumor growth. In a xenograft rat model, we show that E2-Crimson expressing cells can be detected over a 5 week period using optical imaging. Fluorescence intensities correlated with tumor volume and weight and allowed for a reliable and robust quantification of the entire tumor compartment. Using a novel injection regime, the seeding of MDA-MB-231 breast cancer cells in the lungs in a rat model was established and verified.

  11. Morphology and Hydraulic Architecture of Vitis vinifera L. cv. Syrah and Torrontés Riojano Plants Are Unaffected by Variations in Red to Far-Red Ratio.

    Science.gov (United States)

    González, Carina Verónica; Jofré, María Florencia; Vila, Hernán F; Stoffel, Markus; Bottini, Rubén; Giordano, Carla Valeria

    2016-01-01

    Plants have evolved an array of specific photoreceptors to acclimate to the light environment. By sensing light signals, photoreceptors modulate plant morphology, carbon- and water-physiology, crop yield and quality of harvestable organs, among other responses. Many cultural practices and crop management decisions alter light quantity and quality perceived by plants cultivated in the field. Under full sunlight, phytochromes perceive high red to far red ratios (R:FR; 1.1), whereas overhead or lateral low R:FR (below 1.1) are sensed in the presence of plant shade or neighboring plants, respectively. Grapevine is one of the most important fruit crops in the world. To date, studies on grapevine response to light focused on different Photosynthetic Active Radiation (PAR) levels; however, limited data exist about its response to light quality. In this study we aimed to investigate morphological, biochemical, and hydraulic responses of Vitis vinifera to variations in R:FR. Therefore, we irradiated Syrah and Torrontés Riojano plants, grown in a glasshouse, with lateral FR light (low lateral R:FR treatment), while others, that were kept as controls, were not irradiated (ambient lateral R:FR treatment). In response to the low lateral R:FR treatment, grapevine plants did not display any of the SAS morphological markers (i.e. stem length, petiole length and angle, number of lateral shoots) in any of the cultivars assessed, despite an increase in gibberelins and auxin concentrations in leaf tissues. Low lateral R:FR did not affect dry matter partitioning, water-related traits (stomata density and index, wood anatomy), or water-related physiology (plant conductance, transpiration rate, stem hydraulic conductivity, stomatal conductance). None of the Vitis vinifera varieties assessed displayed the classical morphological and hydraulic responses associated to SAS induced by phytochromes. We discuss these results in the context of natural grapevine environment and agronomical

  12. Morphology and Hydraulic Architecture of Vitis vinifera L. cv. Syrah and Torrontés Riojano Plants Are Unaffected by Variations in Red to Far-Red Ratio

    Science.gov (United States)

    González, Carina Verónica; Jofré, María Florencia; Vila, Hernán F.; Stoffel, Markus; Bottini, Rubén; Giordano, Carla Valeria

    2016-01-01

    Plants have evolved an array of specific photoreceptors to acclimate to the light environment. By sensing light signals, photoreceptors modulate plant morphology, carbon- and water-physiology, crop yield and quality of harvestable organs, among other responses. Many cultural practices and crop management decisions alter light quantity and quality perceived by plants cultivated in the field. Under full sunlight, phytochromes perceive high red to far red ratios (R:FR; 1.1), whereas overhead or lateral low R:FR (below 1.1) are sensed in the presence of plant shade or neighboring plants, respectively. Grapevine is one of the most important fruit crops in the world. To date, studies on grapevine response to light focused on different Photosynthetic Active Radiation (PAR) levels; however, limited data exist about its response to light quality. In this study we aimed to investigate morphological, biochemical, and hydraulic responses of Vitis vinifera to variations in R:FR. Therefore, we irradiated Syrah and Torrontés Riojano plants, grown in a glasshouse, with lateral FR light (low lateral R:FR treatment), while others, that were kept as controls, were not irradiated (ambient lateral R:FR treatment). In response to the low lateral R:FR treatment, grapevine plants did not display any of the SAS morphological markers (i.e. stem length, petiole length and angle, number of lateral shoots) in any of the cultivars assessed, despite an increase in gibberelins and auxin concentrations in leaf tissues. Low lateral R:FR did not affect dry matter partitioning, water-related traits (stomata density and index, wood anatomy), or water-related physiology (plant conductance, transpiration rate, stem hydraulic conductivity, stomatal conductance). None of the Vitis vinifera varieties assessed displayed the classical morphological and hydraulic responses associated to SAS induced by phytochromes. We discuss these results in the context of natural grapevine environment and agronomical

  13. FAR-RED ELONGATED HYPOCOTYL3 activates SEPALLATA2 but inhibits CLAVATA3 to regulate meristem determinacy and maintenance in Arabidopsis.

    Science.gov (United States)

    Li, Dongming; Fu, Xing; Guo, Lin; Huang, Zhigang; Li, Yongpeng; Liu, Yang; He, Zishan; Cao, Xiuwei; Ma, Xiaohan; Zhao, Meicheng; Zhu, Guohui; Xiao, Langtao; Wang, Haiyang; Chen, Xuemei; Liu, Renyi; Liu, Xigang

    2016-08-16

    Plant meristems are responsible for the generation of all plant tissues and organs. Here we show that the transcription factor (TF) FAR-RED ELONGATED HYPOCOTYL3 (FHY3) plays an important role in both floral meristem (FM) determinacy and shoot apical meristem maintenance in Arabidopsis, in addition to its well-known multifaceted roles in plant growth and development during the vegetative stage. Through genetic analyses, we show that WUSCHEL (WUS) and CLAVATA3 (CLV3), two central players in the establishment and maintenance of meristems, are epistatic to FHY3 Using genome-wide ChIP-seq and RNA-seq data, we identify hundreds of FHY3 target genes in flowers and find that FHY3 mainly acts as a transcriptional repressor in flower development, in contrast to its transcriptional activator role in seedlings. Binding motif-enrichment analyses indicate that FHY3 may coregulate flower development with three flower-specific MADS-domain TFs and four basic helix-loop-helix TFs that are involved in photomorphogenesis. We further demonstrate that CLV3, SEPALLATA1 (SEP1), and SEP2 are FHY3 target genes. In shoot apical meristem, FHY3 directly represses CLV3, which consequently regulates WUS to maintain the stem cell pool. Intriguingly, CLV3 expression did not change significantly in fhy3 and phytochrome B mutants before and after light treatment, indicating that FHY3 and phytochrome B are involved in light-regulated meristem activity. In FM, FHY3 directly represses CLV3, but activates SEP2, to ultimately promote FM determinacy. Taken together, our results reveal insights into the mechanisms of meristem maintenance and determinacy, and illustrate how the roles of a single TF may vary in different organs and developmental stages.

  14. Regulation of the expression of NADP-malic enzyme by UV-B, red and far-red light in maize seedlings

    Directory of Open Access Journals (Sweden)

    P. Casati

    1999-10-01

    Full Text Available The induction of nicotinamide adenine dinucleotide phosphate-malic enzyme (NADP-ME in etiolated maize (Zea mays seedlings by UV-B and UV-A radiation, and different levels of photosynthetically active radiation (PAR, 400-700 nm was investigated by measuring changes in activity, protein quantity and RNA levels as a function of intensity and duration of exposure to the different radiations. Under low levels of PAR, exposure to UV-B radiation but not UV-A radiation for 6 to 24 h caused a marked increase in the enzyme levels similar to that observed under high PAR in the absence of UV-B. UV-B treatment of green leaves following a 12-h dark period also caused an increase in NADP-ME expression. Exposure to UV-B radiation for only 5 min resulted in a rapid increase of the enzyme, followed by a more gradual rise with longer exposure up to 6 h. Low levels of red light for 5 min or 6 h were also effective in inducing NADP-ME activity equivalent to that obtained with UV-B radiation. A 5-min exposure to far-red light following UV-B or red light treatment reversed the induction of NADP-ME, and this effect could be eliminated by further treatment with UV-B or red light. These results indicate that physiological levels of UV-B radiation can have a positive effect on the induction of this photosynthetic enzyme. The reducing power and pyruvate generated by the activity of NADP-ME may be used for respiration, in cellular repair processes and as substrates for fatty acid synthesis required for membrane repair.

  15. Flowering and Growth Responses of Cultivated Lentil and Wild Lens Germplasm toward the Differences in Red to Far-Red Ratio and Photosynthetically Active Radiation

    Science.gov (United States)

    Yuan, Hai Y.; Saha, Shyamali; Vandenberg, Albert; Bett, Kirstin E.

    2017-01-01

    Understanding environmental responses of pulse crop species and their wild relatives will play an important role in developing genetic strategies for crop improvement in response to changes in climate. This study examined how cultivated lentil and wild Lens germplasm responded to different light environments, specifically differences in red/far-red ratio (R/FR) and photosynthetically active radiation (PAR). Three genotypes of each the seven Lens species were grown in environmentally controlled growth chambers equipped to provide light treatments consisting of different R/FR ratios and PAR values. Our results showed that overall, days to flower of Lens genotypes were mainly influenced by the R/FR induced light quality change but not by the PAR related light intensity change. The cultivated lentil (L. culinaris) showed consistent, accelerated flowering in response to the low R/FR light environment together with three wild lentil genotypes (L. orientalis IG 72611, L. tomentosus IG 72830, and L. ervoides IG 72815) while most wild lentil genotypes had reduced responses and flowering time was not significantly affected. The longest shoot length, longest internode length, and largest leaflet area were observed under the low R/FR low PAR environment for both cultivated and wild lentils. The distinctly different responses between flowering time and elongation under low R/FR conditions among wild Lens genotypes suggests discrete pathways controlling flowering and elongation, which are both components of shade avoidance responses. The yield and above-ground biomass of Lens genotypes were the highest under high R/FR high PAR conditions, intermediate under low R/FR low PAR conditions, and lowest under high R/FR low PAR light conditions. Three L. lamottei genotypes (IG 110809, IG 110810, and IG 110813) and one L. ervoides genotype (IG 72646) were less sensitive in their time to flower responses while maintaining similar yield, biomass, and harvest index across all three light

  16. RfpA, RfpB, and RfpC are the Master Control Elements of Far-Red Light Photoacclimation (FaRLiP).

    Science.gov (United States)

    Zhao, Chi; Gan, Fei; Shen, Gaozhong; Bryant, Donald A

    2015-01-01

    Terrestrial cyanobacteria often occur in niches that are strongly enriched in far-red light (FRL; λ > 700 nm). Some cyanobacteria exhibit a complex and extensive photoacclimation response, known as FRL photoacclimation (FaRLiP). During the FaRLiP response, specialized paralogous proteins replace 17 core subunits of the three major photosynthetic complexes: Photosystem (PS) I, PS II, and the phycobilisome. Additionally, the cells synthesize both chlorophyll (Chl) f and Chl d. Using biparental mating from Escherichia coli, we constructed null mutants of three genes, rfpA, rfpB, and rfpC, in the cyanobacteria Chlorogloeopsis fritschii PCC 9212 and Chroococcidiopsis thermalis PCC 7203. The resulting mutants were no longer able to modify their photosynthetic apparatus to absorb FRL, were no longer able to synthesize Chl f, inappropriately synthesized Chl d in white light, and were unable to transcribe genes of the FaRLiP gene cluster. We conclude that RfpA, RfpB, and RfpC constitute a FRL-activated signal transduction cascade that is the master control switch for the FaRLiP response. FRL is proposed to activate (or inactivate) the histidine kinase activity of RfpA, which leads to formation of the active state of RfpB, the key response regulator and transcription activator. RfpC may act as a phosphate shuttle between RfpA and RfpB. Our results show that reverse genetics via conjugation will be a powerful approach in detailed studies of the FaRLiP response.

  17. Influence of elevated CO[sub 2] on canopy development and red to far-red ratios in 2-storied stands of Ricinus communis

    Energy Technology Data Exchange (ETDEWEB)

    Arnone, J.A.; Korner, C. (University of Basel, Basel (Switzerland). Dept. of Botany)

    1993-07-01

    Vertical structure of plant stands and canopies may change under conditions of elevated CO[sub 2] due to differential responses of overstory and understory plants or plant parts. The authors compared canopy leaf area development, canopy light extinction and the quality of light beneath overstory leaves of two-storied monospecific stands of Ricinus communis exposed to ambient (340 mul[sup -1]) and elevated (610 mul[sup -1]) CO[sub 2]. Plants in each stand were grown in a common soil as closed 'artificial ecosystems' with a ground area of 6.7 m2. Leaf Area Index, LAI, of overstory plants in all ecosystems more than doubled during the experiment but was not different between CO[sub 2] treatments at the end. As a consequence, extinction of photosynthetically active radiation (PAR) was also not altered. However, under elevated CO[sub 2] the red to far-red ratio (R:FR) measured beneath overstory leaves was 10% lower than in ecosystems treated with ambient CO[sub 2]. This reduction was associated with increased thickness of palisade layers of overstory leaves and appears to be a plausible explanation for the specific enhancement of stem elongation of understory plants (without a corresponding biomass response) under elevated CO[sub 2]. Col enrichment led to increased biomass of overstory plants (mainly stem biomass) but had no effect on understory biomass. It is suggested that, under elevated CO[sub 2], reductions in the R:FR ratio beneath overstory canopies may affect understory plant development independently of the effects of PAR extinction.

  18. Far red/near infrared light-induced protection against cardiac ischemia and reperfusion injury remains intact under diabetic conditions and is independent of nitric oxide synthase

    Directory of Open Access Journals (Sweden)

    Agnes eKeszler

    2014-08-01

    Full Text Available Far red/near-infrared light (NIR promotes a wide range of biological effects including tissue protection but whether and how NIR is capable of acutely protecting myocardium against ischemia and reperfusion injury in vivo is not fully elucidated. Our previous work indicates that NIR exposure immediately before and during early reperfusion protects the myocardium against infarction through mechanisms that are nitric oxide (NO-dependent. Here we tested the hypothesis that NIR elicits protection in a diabetic mouse model where other cardioprotective interventions such as pre- and postconditioning fail, and that the protection is independent of nitric oxide synthase (NOS. NIR reduced infarct size dose dependently. Importantly, NIR-induced protection was preserved in a diabetic mouse model (db/db and during acute hyperglycemia, as well as in endothelial NOS-/- mice and in wild type mice treated with NOS inhibitor L-NAME. In in vitro experiments NIR light liberates NO from nitrosyl hemoglobin (HbNO and nitrosyl myoglobin (MbNO in a wavelength (660-830 nm and dose-dependent manner. Irradiation at 660 nm yields the highest release of NO, while at longer wavelengths a dramatic decrease of NO release can be observed. Similar wavelength dependence was observed for the protection of mice against cardiac ischemia and reperfusion injury in vivo. NIR-induced NO release from deoxymyoglobin in the presence of nitrite mildly inhibits respiration of isolated mitochondria after hypoxia. In summary, NIR applied during reperfusion protects the myocardium against infarction in an NO dependent, but NOS-independent mechanisms, whereby mitochondria may be a target of NO released by NIR, leading to reduced reactive oxygen species generation during reperfusion. This unique mechanism preserves protection even during diabetes where other protective strategies fail.

  19. Optimal Static Range Reporting in One Dimension

    DEFF Research Database (Denmark)

    Alstrup, Stephen; Brodal, Gerth Stølting; Rauhe, Theis

    2001-01-01

    We consider static one dimensional range searching problems. These problems are to build static data structures for an integer set S \\subseteq U, where U = \\{0,1,\\dots,2^w-1\\}, which support various queries for integer intervals of U. For the query of reporting all integers in S contained within...... a query interval, we present an optimal data structure with linear space cost and with query time linear in the number of integers reported. This result holds in the unit cost RAM model with word size w and a standard instruction set. We also present a linear space data structure for approximate range...... counting. A range counting query for an interval returns the number of integers in S contained within the interval. For any constant &egr;>0, our range counting data structure returns in constant time an approximate answer which is within a factor of at most 1+&egr; of the correct answer....

  20. LDRD Final Report: Global Optimization for Engineering Science Problems

    Energy Technology Data Exchange (ETDEWEB)

    HART,WILLIAM E.

    1999-12-01

    For a wide variety of scientific and engineering problems the desired solution corresponds to an optimal set of objective function parameters, where the objective function measures a solution's quality. The main goal of the LDRD ''Global Optimization for Engineering Science Problems'' was the development of new robust and efficient optimization algorithms that can be used to find globally optimal solutions to complex optimization problems. This SAND report summarizes the technical accomplishments of this LDRD, discusses lessons learned and describes open research issues.

  1. Optimization of CHR propagation rules: extended report

    OpenAIRE

    Van Weert, Peter

    2008-01-01

    Constraint Handling Rules (CHR) is an elegant, high-level programming language based on multi-headed, forward chaining rules. To ensure CHR propagation rules are applied at most once with the same combination of constraints, CHR implementations maintain a so-called propagation history. The performance impact of this history can be significant. We introduce several optimizations that, for the majority of CHR rules, eliminate this overhead. We formally prove their correctness, and evaluate thei...

  2. Laser scribe optimization study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wannamaker, A.L.

    1996-09-01

    The laser scribe characterization/optimization project was initiated to better understand what factors influence response variables of the laser marking process. The laser marking system is utilized to indelibly identify weapon system components. Many components have limited field life, and traceability to production origin is critical. In many cases, the reliability of the weapon system and the safety of the users can be attributed to individual and subassembly component fabrication processes. Laser beam penetration of the substrate material may affect product function. The design agency for the DOE had requested that Federal Manufacturing and Technologies characterize the laser marking process and implement controls on critical process parameters.

  3. Optimal quality reporting in markets for health plans.

    Science.gov (United States)

    Glazer, Jacob; McGuire, Thomas G

    2006-03-01

    Quality reports about health plans and providers are becoming more prevalent in health care markets. This paper casts the decision about what information to report to consumers about health plans as a policy decision. In a market with adverse selection, complete information about quality leads to inefficient outcomes. In a Rothschild-Stiglitz model, we show that averaging quality information into a summary report can enforce pooling in health insurance, and by choice of the right weights in the averaged report, a payer or regulator can induce first-best quality choices. The optimal quality report is as powerful as optimal risk adjustment in correcting adverse selection inefficiencies.

  4. Optimization of steam explosion pretreatment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Foody, P.

    1980-04-01

    Different operating conditions are required to optimize the yield from each of the various fractions in the substrate. Xylose recovery is maximized at short cooking times whereas maximum lignin recovery requires much longer cooking times. Peak glucose yield and rumen digestibility occur at intermediate times. If process conditions are set for maximum glucose yield we have achieved a yield of 68% of the theoretical, based on an average of a dozen substrates tested. Individual results ranged from 46 to 87%. If the process is optimized for maximum total sugars (i.e. glucose plus xylose) we have obtained an average yield of 60%, with a range of 31 to 75%. With rumen microflora, the average value of the in-vitro cellulose digestibility was 82%, with a range of 41 to 90%. The optimum operating conditions for total sugars are a pressure of 500 to 550 psig with a cooking time of 40 to 50 seconds and 35% starting moisture content. Particle size is not a significant factor, nor is pre-steaming or use of a constricting die in the gun nozzle. High quality lignin can be extracted with 80% yield. The Iotech lignin is very soluble, has a low molecular weight and is reactive. The unique properties of the lignin derive from the explosion at the end of the pretreatment. A lignin formaldehyde resin has been successfully formulated and tested. It represents a high value utilization of the lignin byproduct with immediate market potential. A detailed engineering design of the process gives an estimated operating cost of $7.50/OD ton of biomass. At this low cost, the Iotech process achieves many important pretreatment goals in a single step. The substrate has been sterilized; it has been pulverized into a powder; the cellulose has been accessible; and a highly reactive lignin fraction can be recovered and utilized.

  5. Explanatory style, dispositional optimism, and reported parental behavior.

    Science.gov (United States)

    Hjelle, L A; Busch, E A; Warren, J E

    1996-12-01

    The relationship between two cognitive personality constructs (explanatory style and dispositional optimism) and retrospective self-reports of maternal and paternal behavior were investigated. College students (62 men and 145 women) completed the Life Orientation Test, Attributional Style Questionnaire, and Parental Acceptance-Rejection Questionnaire in a single session. As predicted, dispositional optimism was positively correlated with reported maternal and paternal warmth/acceptance and negatively correlated with aggression/hostility, neglect/indifference, and undifferentiated rejection during middle childhood. Unexpectedly, explanatory style was found to be more strongly associated with retrospective reports of paternal as opposed to maternal behavior. The implications of these results for future research concerning the developmental antecedents of differences in explanatory style and dispositional optimism are discussed.

  6. Optimized ground coupled heat pump design: Phase 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.; Catan, M.; Le Doux, P.; Metz, P.D.; Saunders, J.H.

    1985-10-01

    This report describes the first phase of a project to design a water-to-air heat pump optimized for ground coupling applications. The project is being conducted jointly by Brookhaven National Laboratory (BNL), Oak Ridge National Laboratory (ORNL), and an industrial partner to be selected via a competitive procurement. In the completion of Phase I, three major tasks were completed. First, based on experimental work performed at BNL, water-refrigerant heat exchanger models were developed for incorporation into the ORNL heat pump optimization program. Next, a procedure was developed to generate correlations between heat pump entering fluid temperature and load. The correlations, called ''Source Temperature/Load Maps'', will tell the optimization program how many hours/season the heat pump will operate with any pair of values for these quantities. This report discusses these first two tasks within Phase I.

  7. Final Report of the Simulation Optimization Task Force

    CERN Document Server

    Rimoldi, A; Dell'Acqua, A; Froidevaux, D; Gianotti, F; Guyot, C; Hinchliffe, I; Jakobs, K; Marshall, Z; Nisati, A; Quarrie, D; Unal, G; Young, C

    2009-01-01

    This is the final report of the ATLAS Simulation Optimization Task Force, established in June of 2007. This note justifies the selected Geant4 version, physics list, and range cuts to be used by the default ATLAS simulation for initial data taking and beyond. The current status of several projects, including detector description, simulation validation, studies of additional Geant4 parameters, and cavern background, are reported.

  8. Inhibition of auxin transport and auxin signaling and treatment with far red light induces root coiling in the phospholipase-A mutant ppla-I-1. Significance for surface penetration?

    Science.gov (United States)

    Perrineau, F; Wimalasekera, R; Effendi, Y; Scherer, G F E

    2016-06-01

    When grown on a non-penetretable at a surface angle of 45°, Arabidopsis roots form wave-like structures and, in wild type rarely, but in certain mutants the tip root even may form circles. These circles are called coils. The formation of coils depends on the complex interaction of circumnutation, gravitropism and negative thigmotropism where - at least - gravitropism is intimately linked to auxin transport and signaling. The knockout mutant of patatin-related phospholipase-AI-1 (pplaI-1) is an auxin-signaling mutant which forms moderately increased numbers of coils on tilted agar plates. We tested the effects of the auxin efflux transport inhibitor NPA (1-naphthylphtalamic acid) and of the influx transport inhibitor 1-NOA (1-naphthoxyacetic acid) which both further increased root coil formation. The pPLAI-1 inhibitors HELSS (haloenol lactone suicide substrate=E-6-(bromomethylene)tetrahydro-3-(1-naphthalenyl)-2H-pyran-2-one) and ETYA (eicosatetraynoic acid) which are auxin signaling inhibitors also increased coil formation. In addition, far red light treatment increased coil formation. The results point out that a disturbance of auxin transport and signaling is one potential cause for root coils. As we show that the mutant pplaI-1 penetrates horizontal agar plates better than wild type plants root movements may help penetrating the soil.

  9. Arabidopsis COP1 and SPA genes are essential for plant elongation but not for acceleration of flowering time in response to a low red light to far-red light ratio.

    Science.gov (United States)

    Rolauffs, Sebastian; Fackendahl, Petra; Sahm, Jan; Fiene, Gabriele; Hoecker, Ute

    2012-12-01

    Plants sense vegetative shade as a reduction in the ratio of red light to far-red light (R:FR). Arabidopsis (Arabidopsis thaliana) responds to a reduced R:FR with increased elongation of the hypocotyl and the leaf petioles as well as with an acceleration of flowering time. The repressor of light signaling, CONSTITUTIVELY PHOTOMORPHOGENIC1 (COP1), has been shown previously to be essential for the shade-avoidance response in seedlings. Here, we have investigated the roles of COP1 and the COP1-interacting SUPPRESSOR OF PHYA-105 (SPA) proteins in seedling and adult facets of the shade-avoidance response. We show that COP1 and the four SPA genes are essential for hypocotyl and leaf petiole elongation in response to low R:FR, in a fashion that involves the COP1/SPA ubiquitination target LONG HYPOCOTYL IN FR LIGHT1 but not ELONGATED HYPOCOTYL5. In contrast, the acceleration of flowering in response to a low R:FR was normal in cop1 and spa mutants, thus demonstrating that the COP1/SPA complex is only required for elongation responses to vegetative shade and not for shade-induced early flowering. We further show that spa mutant seedlings fail to exhibit an increase in the transcript levels of the auxin biosynthesis genes YUCCA2 (YUC2), YUC8, and YUC9 in response to low R:FR, suggesting that an increase in auxin biosynthesis in vegetative shade requires SPA function. Consistent with this finding, expression of the auxin-response marker gene DR5::GUS did not increase in spa mutant seedlings exposed to low R:FR. We propose that COP1/SPA activity, via LONG HYPOCOTYL IN FR LIGHT1, is required for shade-induced modulation of the auxin biosynthesis pathway and thereby enhances cell elongation in low R:FR.

  10. Arabidopsis COP1 and SPA Genes Are Essential for Plant Elongation But Not for Acceleration of Flowering Time in Response to a Low Red Light to Far-Red Light Ratio1[W

    Science.gov (United States)

    Rolauffs, Sebastian; Fackendahl, Petra; Sahm, Jan; Fiene, Gabriele; Hoecker, Ute

    2012-01-01

    Plants sense vegetative shade as a reduction in the ratio of red light to far-red light (R:FR). Arabidopsis (Arabidopsis thaliana) responds to a reduced R:FR with increased elongation of the hypocotyl and the leaf petioles as well as with an acceleration of flowering time. The repressor of light signaling, CONSTITUTIVELY PHOTOMORPHOGENIC1 (COP1), has been shown previously to be essential for the shade-avoidance response in seedlings. Here, we have investigated the roles of COP1 and the COP1-interacting SUPPRESSOR OF PHYA-105 (SPA) proteins in seedling and adult facets of the shade-avoidance response. We show that COP1 and the four SPA genes are essential for hypocotyl and leaf petiole elongation in response to low R:FR, in a fashion that involves the COP1/SPA ubiquitination target LONG HYPOCOTYL IN FR LIGHT1 but not ELONGATED HYPOCOTYL5. In contrast, the acceleration of flowering in response to a low R:FR was normal in cop1 and spa mutants, thus demonstrating that the COP1/SPA complex is only required for elongation responses to vegetative shade and not for shade-induced early flowering. We further show that spa mutant seedlings fail to exhibit an increase in the transcript levels of the auxin biosynthesis genes YUCCA2 (YUC2), YUC8, and YUC9 in response to low R:FR, suggesting that an increase in auxin biosynthesis in vegetative shade requires SPA function. Consistent with this finding, expression of the auxin-response marker gene DR5::GUS did not increase in spa mutant seedlings exposed to low R:FR. We propose that COP1/SPA activity, via LONG HYPOCOTYL IN FR LIGHT1, is required for shade-induced modulation of the auxin biosynthesis pathway and thereby enhances cell elongation in low R:FR. PMID:23093358

  11. Near-Optimal Range Reporting Structures for Categorical

    DEFF Research Database (Denmark)

    Larsen, Kasper Green; Walderveen, Freek van

    2013-01-01

    Range reporting on categorical (or colored) data is a well-studied generalization of the classical range reporting problem in which each of the N input points has an associated color (category). A query then asks to report the set of colors of the points in a given rectangular query range, which...... may be far smaller than the set of all points in the query range. We study two-dimensional categorical range reporting in both the word-RAM and I/O-model. For the I/O-model, we present two alternative data structures for three-sided queries. The first answers queries in optimal O(lgB N + K/B) I....../Os using O(N lg*N) space, where K is the number of distinct colors in the output, B is the disk block size, and lg*N is the iterated logarithm of N. Our second data structure uses linear space and answers queries in O(lg B N + lg(h) N + K/B) I/Os for any constant integer h ≥ 1. Here lg(1) N = lg N and lg...

  12. Optimal design of gold nanomatryoshkas with embedded Raman reporters

    Science.gov (United States)

    Khlebtsov, Nikolai G.; Khlebtsov, Boris N.

    2017-03-01

    Gold multilayered nanoparticles (nanomatryoshkas, NMs), in which Raman molecules are embedded in a nanometer-sized gap between Au layers, have great potential in biomedical applications as highly efficient surface enhanced Raman scattering (SERS) probes. Compared to other SERS tags, the Raman molecules in Au NM are protected from environmental conditions and subjected to a strongly enhanced electromagnetic (EM) field in the gap. However, the SERS efficiency of Au NMs is multifactorial and depends on their structure, excitation wavelength, resonance properties and loading of Raman reporters, etc. Here, we report a detailed analysis of EM enhancement in Au(core)/Gap/Au(shell) NMs as a function of the core/gap/shell dimensions, the gap refractive index, and the excitation wavelength. The applicability of classical treatment is justified by discussion of recent studies on non-local and quantum tunneling effects in plasmonic dimers. Our optimization strategy is based on efficient rigorous solution for internal EM fields in a layered sphere and explicit analytical solutions for the surface and volume averaged EM intensities within a particular layer and around the NM. SERS enhancement is shown to be strongly dependent, in a resonance manner, on the core/gap/shell dimensions. For four wavelengths of commercial Raman devices 532, 633, 785, and 1064 nm, the optimal NM structures are found. Simulation data are discussed in the light of practical constrains and illustrated by experimental data on Au NMs with embedded 1,4 benzenedithiol (BDT) molecules that serve both as spacers and Raman reporters. The physical insights acquired from this study is hoped to pave the way for rational design of new SERS tags based on plasmonic field enhancement in the nanometer-sized gaps.

  13. FERMI@Elettra FEL Design Technical Optimization Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Fawley, William; Penn, Gregory; Allaria, Enrico; De Ninno,Giovanni; Graves, William

    2006-07-31

    This is the final report of the FEL Design Group for the Technical Optimization Study for the FERMI{at}ELETTRA project. The FERMI{at}ELETTRA project is based on the principle of harmonic upshifting of an initial ''seed'' signal in a single pass, FEL amplifier employing multiple undulators. There are a number of FEL physics principles which underlie this approach to obtaining short wavelength output: (1) the energy modulation of the electron beam via the resonant interaction with an external laser seed (2) the use of a chromatic dispersive section to then develop a strong density modulation with large harmonic overtones (3) the production of coherent radiation by the microbunched beam in a downstream radiator. Within the context of the FERMI project, we discuss each of these elements in turn.

  14. Pilot Project to Optimize Superfund-financed Pump and Treat Systems: Summary Report and Lessons Learned

    Science.gov (United States)

    This report summarizes Phase II (site optimization) of the Nationwide Fund-lead Pump and Treat Optimization Project. This phase included conducting Remediation System Evaluations (RSEs) at each of the 20 sites selected in Phase I.

  15. RELAP-7 Progress Report. FY-2015 Optimization Activities Summary

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    This report summarily documents the optimization activities on RELAP-7 for FY-2015. It includes the migration from the analytical stiffened gas equation of state for both the vapor and liquid phases to accurate and efficient property evaluations for both equilibrium and metastable (nonequilibrium) states using the Spline-Based Table Look-up (SBTL) method with the IAPWS-95 properties for steam and water. It also includes the initiation of realistic closure models based, where appropriate, on the U.S. Nuclear Regulatory Commission’s TRACE code. It also describes an improved entropy viscosity numerical stabilization method for the nonequilibrium two-phase flow model of RELAP-7. For ease of presentation to the reader, the nonequilibrium two-phase flow model used in RELAP-7 is briefly presented, though for detailed explanation the reader is referred to RELAP-7 Theory Manual [R.A. Berry, J.W. Peterson, H. Zhang, R.C. Martineau, H. Zhao, L. Zou, D. Andrs, “RELAP-7 Theory Manual,” Idaho National Laboratory INL/EXT-14-31366(rev. 1), February 2014].

  16. Photocathode Optimization for a Dynamic Transmission Electron Microscope: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, P; Flom, Z; Heinselman, K; Nguyen, T; Tung, S; Haskell, R; Reed, B W; LaGrange, T

    2011-08-04

    The Dynamic Transmission Electron Microscope (DTEM) team at Harvey Mudd College has been sponsored by LLNL to design and build a test setup for optimizing the performance of the DTEM's electron source. Unlike a traditional TEM, the DTEM achieves much faster exposure times by using photoemission from a photocathode to produce electrons for imaging. The DTEM team's work is motivated by the need to improve the coherence and current density of the electron cloud produced by the electron gun in order to increase the image resolution and contrast achievable by DTEM. The photoemission test setup is nearly complete and the team will soon complete baseline tests of electron gun performance. The photoemission laser and high voltage power supply have been repaired; the optics path for relaying the laser to the photocathode has been finalized, assembled, and aligned; the internal setup of the vacuum chamber has been finalized and mostly implemented; and system control, synchronization, and data acquisition has been implemented in LabVIEW. Immediate future work includes determining a consistent alignment procedure to place the laser waist on the photocathode, and taking baseline performance measurements of the tantalum photocathode. Future research will examine the performance of the electron gun as a function of the photoemission laser profile, the photocathode material, and the geometry and voltages of the accelerating and focusing components in the electron gun. This report presents the team's progress and outlines the work that remains.

  17. Phase II Final Report Computer Optimization of Electron Guns

    Energy Technology Data Exchange (ETDEWEB)

    R. Lawrence Ives; Thuc Bui; Hien Tran; Michael Read; Adam Attarian; William Tallis

    2011-04-15

    This program implemented advanced computer optimization into an adaptive mesh, finite element, 3D, charged particle code. The routines can optimize electron gun performance to achieve a specified current, beam size, and perveance. It can also minimize beam ripple and electric field gradients. The magnetics optimization capability allows design of coil geometries and magnetic material configurations to achieve a specified axial magnetic field profile. The optimization control program, built into the charged particle code Beam Optics Analyzer (BOA) utilizes a 3D solid modeling package to modify geometry using design tables. Parameters within the graphical user interface (currents, voltages, etc.) can be directly modified within BOA. The program implemented advanced post processing capability for the optimization routines as well as the user. A Graphical User Interface allows the user to set up goal functions, select variables, establish ranges of variation, and define performance criteria. The optimization capability allowed development of a doubly convergent multiple beam gun that could not be designed using previous techniques.

  18. Industrial cogeneration optimization program. Final report, September 1979

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Jerry; McWhinney, Jr., Robert T.

    1980-01-01

    This study program is part of the DOE Integrated Industry Cogeneration Program to optimize, evaluate, and demonstrate cogeneration systems, with direct participation of the industries most affected. One objective is to characterize five major energy-intensive industries with respect to their energy-use profiles. The industries are: petroleum refining and related industries, textile mill products, paper and allied products, chemicals and allied products, and food and kindred products. Another objective is to select optimum cogeneration systems for site-specific reference case plants in terms of maximum energy savings subject to given return on investment hurdle rates. Analyses were made that define the range of optimal cogeneration systems for each reference-case plant considering technology applicability, economic factors, and energy savings by type of fuel. This study also provides guidance to other parts of the program through information developed with regard to component development requirements, institutional and regulatory barriers, as well as fuel use and environmental considerations. (MCW)

  19. Renewable Energy Optimization Report for Naval Station Newport

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, R.; Mosey, G.; Olis, D.

    2012-02-01

    In 2008, the U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage the development of renewable energy (RE) on potentially contaminated land and mine sites. As part of this effort, EPA is collaborating with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to evaluate RE options at Naval Station (NAVSTA) Newport in Newport, Rhode Island. NREL's Renewable Energy Optimization (REO) tool was utilized to identify RE technologies that present the best opportunity for life-cycle cost-effective implementation while also serving to reduce energy-related carbon dioxide emissions and increase the percentage of RE used at NAVSTA Newport. The technologies included in REO are daylighting, wind, solar ventilation preheating (SVP), solar water heating, photovoltaics (PV), solar thermal (heating and electric), and biomass (gasification and cogeneration). The optimal mix of RE technologies depends on several factors including RE resources; technology cost and performance; state, utility, and federal incentives; and economic parameters (discount and inflation rates). Each of these factors was considered in this analysis. Technologies not included in REO that were investigated separately per NAVSTA Newport request include biofuels from algae, tidal power, and ground source heat pumps (GSHP).

  20. Second-generation-heliostat optimization studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-05-01

    The objective of this study was to define and quantify cost reductions in the Martin Marietta Denver Aerospace Second Generation Heliostat resulting from design and cost optimization. These cost reductions were based on optimizing the heliostat performance vs. cost and engineering design, and reviewing the design specification in selected technological areas with a goal of removing nonrealistic requirements and eliminating or minimizing overdesign. Specific technological areas investigated were: (1) designing the heliostat for survival strength rather than stiffness and reducing the operational wind requirements as dictated by this design approach; (2) reducing the pointing accuracy and/or beam quality required for some fraction or all of the heliostat field; (3) modifying the operational temperature range; (4) relaxing the rate at which the heliostat must move in the slew mode; (5) using alternate beam safety strategies; (6) analyzing actual wind data for selected sites in the southwest United States vs. the heliostat design specification survival wind requirements; (7) estimating heliostat damage for winds in excess of the design specification over a 30 year period; (8) evaluating the impact of designing the heliostat for higher wind loads; and (9) investigating the applicability to heliostat design of the standard engineering practices for designing buildings.

  1. Dynamic Behavior and Optimization of Advanced Armor Ceramics: January-December 2012 Annual Report

    Science.gov (United States)

    2015-03-01

    and Optimization of Advanced Armor Ceramics : January–December 2012 Annual Report edited by RA Haber Recipient Program Manager Director, Center...for Ceramic Research Rutgers, The State University of New Jersey 607 Taylor Road, Piscataway, NJ 08854-8065 and JW McCauley (Emeritus...Excellence Dynamic Behavior and Optimization of Advanced Armor Ceramics : January–December 2012 Annual Report edited by RA Haber Recipient

  2. Reliability of self-reported eating disorders : Optimizing population screening

    NARCIS (Netherlands)

    Keski-Rahkonen, Anna; Sihvola, Elina; Raevuori, Anu; Kaukoranta, Jutta; Bulik, Cynthia M.; Hoek, Hans W.; Rissanen, Aila; Kaprio, Jaakko

    2006-01-01

    Objective: The objective of this study was to assess whether short self-report eating disorder screening questions are useful population screening methods. Method: We screened the female participants (N = 2881) from the 1975-1079 birth cohorts of Finnish twins for eating disorders, using several sho

  3. Reliability of self-reported eating disorders : Optimizing population screening

    NARCIS (Netherlands)

    Keski-Rahkonen, Anna; Sihvola, Elina; Raevuori, Anu; Kaukoranta, Jutta; Bulik, Cynthia M.; Hoek, Hans W.; Rissanen, Aila; Kaprio, Jaakko

    2006-01-01

    Objective: The objective of this study was to assess whether short self-report eating disorder screening questions are useful population screening methods. Method: We screened the female participants (N = 2881) from the 1975-1079 birth cohorts of Finnish twins for eating disorders, using several

  4. Reliability of self-reported eating disorders : Optimizing population screening

    NARCIS (Netherlands)

    Keski-Rahkonen, Anna; Sihvola, Elina; Raevuori, Anu; Kaukoranta, Jutta; Bulik, Cynthia M.; Hoek, Hans W.; Rissanen, Aila; Kaprio, Jaakko

    2006-01-01

    Objective: The objective of this study was to assess whether short self-report eating disorder screening questions are useful population screening methods. Method: We screened the female participants (N = 2881) from the 1975-1079 birth cohorts of Finnish twins for eating disorders, using several sho

  5. Optimized concentrating/passive tracking solar collector. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sterne, K E; Johnson, A L; Grotheer, R H

    1979-01-01

    A concentrating solar collector having about half the material cost of other collectors with similar performance is described. The selected design is a Compound Parabolic Concentrator (CPC) which concentrates solar energy throughout the year without requiring realignment. Output is a fluid heated to 100/sup 0/C with good efficiency. The optical design of the reflector surface was optimized, yielding a 2.0:1 concentration ratio with a 60/sup 0/C acceptance angle and a low profile. Double glazing was chosen consisting of a polyester film outer glazing and an inner glazing of glass tubes around the absorbers. The selectively coated steel absorber tubes are connected in series with flexible plastic tubing. Much development effort went into the materials for the reflector subassembly. A laminate of metalized plastic film over plaster was chosen for the reflective surface. The reflector is rigidized by attaching filled epoxy header plates at each end. Aluminum side rails and an insulating back complete the structure. The finished design resulted in a material cost of $21.40 per square meter in production quantities. Performance testing of a prototype produced a 50% initial efficiency rating. This is somewhat lower than expected, and is due to materials and processes used in the prototype for the outer glazing, reflective surface and absorber coating. However, the efficiency curve drops only slightly with increasing temperature differential, showing the inherent advantage of the concentrator over flat plate collectors.

  6. Optimism

    Science.gov (United States)

    Carver, Charles S.; Scheier, Michael F.; Segerstrom, Suzanne C.

    2010-01-01

    Optimism is an individual difference variable that reflects the extent to which people hold generalized favorable expectancies for their future. Higher levels of optimism have been related prospectively to better subjective well-being in times of adversity or difficulty (i.e., controlling for previous well-being). Consistent with such findings, optimism has been linked to higher levels of engagement coping and lower levels of avoidance, or disengagement, coping. There is evidence that optimism is associated with taking proactive steps to protect one's health, whereas pessimism is associated with health-damaging behaviors. Consistent with such findings, optimism is also related to indicators of better physical health. The energetic, task-focused approach that optimists take to goals also relates to benefits in the socioeconomic world. Some evidence suggests that optimism relates to more persistence in educational efforts and to higher later income. Optimists also appear to fare better than pessimists in relationships. Although there are instances in which optimism fails to convey an advantage, and instances in which it may convey a disadvantage, those instances are relatively rare. In sum, the behavioral patterns of optimists appear to provide models of living for others to learn from. PMID:20170998

  7. Optimization

    CERN Document Server

    Pearce, Charles

    2009-01-01

    Focuses on mathematical structure, and on real-world applications. This book includes developments in several optimization-related topics such as decision theory, linear programming, turnpike theory, duality theory, convex analysis, and queuing theory.

  8. LDRD report : parallel repartitioning for optimal solver performance.

    Energy Technology Data Exchange (ETDEWEB)

    Heaphy, Robert; Devine, Karen Dragon; Preis, Robert (University of Paderborn, Paderborn, Germany); Hendrickson, Bruce Alan; Heroux, Michael Allen; Boman, Erik Gunnar

    2004-02-01

    We have developed infrastructure, utilities and partitioning methods to improve data partitioning in linear solvers and preconditioners. Our efforts included incorporation of data repartitioning capabilities from the Zoltan toolkit into the Trilinos solver framework, (allowing dynamic repartitioning of Trilinos matrices); implementation of efficient distributed data directories and unstructured communication utilities in Zoltan and Trilinos; development of a new multi-constraint geometric partitioning algorithm (which can generate one decomposition that is good with respect to multiple criteria); and research into hypergraph partitioning algorithms (which provide up to 56% reduction of communication volume compared to graph partitioning for a number of emerging applications). This report includes descriptions of the infrastructure and algorithms developed, along with results demonstrating the effectiveness of our approaches.

  9. Optimal imaging for treaty verification FY2014 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hilton, Nathan R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Johnson, William C. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Brubaker, Erik M. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Kupinski, Matthew Alan [Univ. of Arizona, Tucson, AZ (United States); MacGahan, Christopher Jonathan [Univ. of Arizona, Tucson, AZ (United States)

    2014-10-01

    FY2014 technical report of our project funded by DNN R&D that leverages advanced inference methods developed for medical and adaptive imaging to address arms control applications. We seek a method to acquire and analyze imaging data of declared treaty-accountable items without creating an image of those objects or otherwise storing or revealing any classified information. Such a method would avoid the use of classified-information barriers. We present our progress on FY2014 tasks defined in our life-cycle plan. We also describe some future work that is part of the continuation of this project in FY2015 and beyond as part of a venture that joins ours with a related PNNL project.

  10. Child Maltreatment: Optimizing Recognition and Reporting by School Nurses.

    Science.gov (United States)

    Jordan, Kathleen S; MacKay, Peggy; Woods, Stephanie J

    2016-12-07

    School nurses perform a crucial role in the prevention, identification, intervention, and reporting of child maltreatment. The purpose of this article is to share the highlights of a research project conducted to (a) examine the effectiveness of an educational intervention program in increasing the knowledge, confidence, and self-efficacy in school nurses regarding children at risk of maltreatment; and (b) discover issues surrounding the comfort level engaging with children, communicating with teachers and other personnel, and ethical issues. The study consisted of two phases. Phase 1 was a face-to-face evidenced-based educational intervention. Focus groups implemented in Phase 2 discovered specific concerns of school nurses. Results indicate a significant increase in school nurse knowledge, confidence, and self-efficacy related to children at risk. Five themes were identified from the focus groups: the importance of interprofessional collaboration, identifiers of children at risk of maltreatment, the role of the school nurse as a mentor and leader, the importance of advancing one's knowledge and skill set, and constraints faced by school nurses.

  11. FERMI&Elettra Accelerator Technical Optimization Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Cornacchia, M.; Craievich, P.; Di Mitri, S.; /Sincrotrone Trieste; Pogorelov, I.; Qiang, J.; Venturini, M.; Zholents, A.; /LBL, Berkeley; Wang, D.; /MIT; Warnock, R.; /SLAC

    2007-04-30

    This chapter describes the accelerator physics aspects, the engineering considerations and the choice of parameters that led to the accelerator design of the FERMI Free-Electron-Laser. The accelerator (also called the ''electron beam delivery system'') covers the region from the exit of the injector to the entrance of the first FEL undulator. The considerations that led to the proposed configuration were made on the basis of a study that explored various options and performance limits. This work follows previous studies of x-ray FEL facilities (SLAC LCLS [1], DESY XFEL [2], PAL XFEL [3], MIT [4], BESSY FEL [5], LBNL LUX [6], Daresbury 4GLS [7]) and integrates many of the ideas that were developed there. Several issues specific to harmonic cascade FELs, and that had not yet been comprehensively studied, were also encountered and tackled. A particularly difficult issue was the need to meet the requirement for high peak current and small slice energy spread, as the specification for the ratio of these two parameters (that defines the peak brightness of the electron beam) is almost a factor of two higher than that of the LCLS's SASE FEL. Another challenging aspect was the demand to produce an electron beam with as uniform as possible peak current and energy distributions along the bunch, a condition that was met by introducing novel beam dynamics techniques. Part of the challenge was due to the fact that there were no readily available computational tools to carry out reliable calculations, and these had to be developed. Most of the information reported in this study is available in the form of scientific publications, and is partly reproduced here for the convenience of the reader.

  12. Contingency Contractor Optimization Phase 3 Sustainment Verification and Validation V&V) Report - Contingency Contractor Optimization Engineering - Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Bandlow, Alisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Durfee, Justin David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Frazier, Christopher Rawls [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Adair, Kristin Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Operations Research and Computational Analysis; Turgeon, Jennifer [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). High Confidence System Environments

    2016-04-01

    The reports and test plans contained within this document serve as supporting materials to the activities listed within the “Contingency Contractor Optimization Tool – Prototype (CCOT-P) Verification & Validation Plan” [1]. The activities included test development, testing, peer reviews, and expert reviews. The engineering prototype reviews were done for both the software and the mathematical model used in CCOT-P. Section 2 includes the peer and expert review reports, which summarize the findings from each of the reviews and document the resolution of any issues. Section 3 details the test plans that were followed for functional testing of the application through the interface. Section 4 describes the unit tests that were run on the code.

  13. Final Report A Multi-Language Environment For Programmable Code Optimization and Empirical Tuning

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Qing [Univ. of Colorado, Colorado Springs, CO (United States); Whaley, Richard Clint [Univ. of Texas, San Antonio, TX (United States); Qasem, Apan [Texas State Univ., San Marcos, TX (United States); Quinlan, Daniel [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-11-23

    This report summarizes our effort and results of building an integrated optimization environment to effectively combine the programmable control and the empirical tuning of source-to-source compiler optimizations within the framework of multiple existing languages, specifically C, C++, and Fortran. The environment contains two main components: the ROSE analysis engine, which is based on the ROSE C/C++/Fortran2003 source-to-source compiler developed by Co-PI Dr.Quinlan et. al at DOE/LLNL, and the POET transformation engine, which is based on an interpreted program transformation language developed by Dr. Yi at University of Texas at San Antonio (UTSA). The ROSE analysis engine performs advanced compiler analysis, identifies profitable code transformations, and then produces output in POET, a language designed to provide programmable control of compiler optimizations to application developers and to support the parameterization of architecture-sensitive optimizations so that their configurations can be empirically tuned later. This POET output can then be ported to different machines together with the user application, where a POET-based search engine empirically reconfigures the parameterized optimizations until satisfactory performance is found. Computational specialists can write POET scripts to directly control the optimization of their code. Application developers can interact with ROSE to obtain optimization feedback as well as provide domain-specific knowledge and high-level optimization strategies. The optimization environment is expected to support different levels of automation and programmer intervention, from fully-automated tuning to semi-automated development and to manual programmable control.

  14. Naturally fractured tight gas reservoir detection optimization. Quarterly report, January 1, 1997--March 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This document contains the quarterly report dated January 1-March 31, 1997 for the Naturally Fractured Tight Gas Reservoir Detection Optimization project. Topics covered in this report include AVOA modeling using paraxial ray tracing, AVOA modeling for gas- and water-filled fractures, 3-D and 3-C processing, and technology transfer material. Several presentations from a Geophysical Applications Workshop workbook, workshop schedule, and list of workshop attendees are also included.

  15. Fermilab Central Computing Facility: Energy conservation report and mechanical systems design optimization and cost analysis study

    Energy Technology Data Exchange (ETDEWEB)

    Krstulovich, S.F.

    1986-11-12

    This report is developed as part of the Fermilab Central Computing Facility Project Title II Design Documentation Update under the provisions of DOE Document 6430.1, Chapter XIII-21, Section 14, paragraph a. As such, it concentrates primarily on HVAC mechanical systems design optimization and cost analysis and should be considered as a supplement to the Title I Design Report date March 1986 wherein energy related issues are discussed pertaining to building envelope and orientation as well as electrical systems design.

  16. Internal combustion engine report: Spark ignited ICE GenSet optimization and novel concept development

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.; Blarigan, P. Van [Sandia National Labs., Livermore, CA (United States)

    1998-08-01

    In this manuscript the authors report on two projects each of which the goal is to produce cost effective hydrogen utilization technologies. These projects are: (1) the development of an electrical generation system using a conventional four-stroke spark-ignited internal combustion engine generator combination (SI-GenSet) optimized for maximum efficiency and minimum emissions, and (2) the development of a novel internal combustion engine concept. The SI-GenSet will be optimized to run on either hydrogen or hydrogen-blends. The novel concept seeks to develop an engine that optimizes the Otto cycle in a free piston configuration while minimizing all emissions. To this end the authors are developing a rapid combustion homogeneous charge compression ignition (HCCI) engine using a linear alternator for both power take-off and engine control. Targeted applications include stationary electrical power generation, stationary shaft power generation, hybrid vehicles, and nearly any other application now being accomplished with internal combustion engines.

  17. Bacterial host and reporter gene optimization for genetically encoded whole cell biosensors.

    Science.gov (United States)

    Brutesco, Catherine; Prévéral, Sandra; Escoffier, Camille; Descamps, Elodie C T; Prudent, Elsa; Cayron, Julien; Dumas, Louis; Ricquebourg, Manon; Adryanczyk-Perrier, Géraldine; de Groot, Arjan; Garcia, Daniel; Rodrigue, Agnès; Pignol, David; Ginet, Nicolas

    2017-01-01

    Whole-cell biosensors based on reporter genes allow detection of toxic metals in water with high selectivity and sensitivity under laboratory conditions; nevertheless, their transfer to a commercial inline water analyzer requires specific adaptation and optimization to field conditions as well as economical considerations. We focused here on both the influence of the bacterial host and the choice of the reporter gene by following the responses of global toxicity biosensors based on constitutive bacterial promoters as well as arsenite biosensors based on the arsenite-inducible Pars promoter. We observed important variations of the bioluminescence emission levels in five different Escherichia coli strains harboring two different lux-based biosensors, suggesting that the best host strain has to be empirically selected for each new biosensor under construction. We also investigated the bioluminescence reporter gene system transferred into Deinococcus deserti, an environmental, desiccation- and radiation-tolerant bacterium that would reduce the manufacturing costs of bacterial biosensors for commercial water analyzers and open the field of biodetection in radioactive environments. We thus successfully obtained a cell survival biosensor and a metal biosensor able to detect a concentration as low as 100 nM of arsenite in D. deserti. We demonstrated that the arsenite biosensor resisted desiccation and remained functional after 7 days stored in air-dried D. deserti cells. We also report here the use of a new near-infrared (NIR) fluorescent reporter candidate, a bacteriophytochrome from the magnetotactic bacterium Magnetospirillum magneticum AMB-1, which showed a NIR fluorescent signal that remained optimal despite increasing sample turbidity, while in similar conditions, a drastic loss of the lux-based biosensors signal was observed.

  18. Schedule Optimization Study, Hanford RI/FS Program. Volume 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    A Schedule Optimization Study (SOS) of the US Department of Energy (DOE) Hanford Site Remedial Investigation/Feasibility Study (RI/FS) Program was conducted by an independent team of professionals from other federal agencies and the private sector experienced in environmental restoration. This team spent two weeks at Hanford in September 1992 examining the reasons for the lengthy RI/FS process at Hanford and developing recommendations to expedite the process. The need for the study arose out of a schedule dispute regarding the submission of the 1100-EM-1 Operable Unit RI/FS Work Plan. This report documents the study called for in the August 29, 1991, Dispute Resolution Committee Decision Statement. Battelle`s Environmental Management Operations (EMO) coordinated the effort for DOE`s Richland Field Office (RL).

  19. Water Use Optimization Toolset Project: Development and Demonstration Phase Draft Report

    Energy Technology Data Exchange (ETDEWEB)

    Gasper, John R. [Argonne National Laboratory; Veselka, Thomas D. [Argonne National Laboratory; Mahalik, Matthew R. [Argonne National Laboratory; Hayse, John W. [Argonne National Laboratory; Saha, Samrat [Argonne National Laboratory; Wigmosta, Mark S. [PNNL; Voisin, Nathalie [PNNL; Rakowski, Cynthia [PNNL; Coleman, Andre [PNNL; Lowry, Thomas S. [SNL

    2014-05-19

    This report summarizes the results of the development and demonstration phase of the Water Use Optimization Toolset (WUOT) project. It identifies the objective and goals that guided the project, as well as demonstrating potential benefits that could be obtained by applying the WUOT in different geo-hydrologic systems across the United States. A major challenge facing conventional hydropower plants is to operate more efficiently while dealing with an increasingly uncertain water-constrained environment and complex electricity markets. The goal of this 3-year WUOT project, which is funded by the U.S. Department of Energy (DOE), is to improve water management, resulting in more energy, revenues, and grid services from available water, and to enhance environmental benefits from improved hydropower operations and planning while maintaining institutional water delivery requirements. The long-term goal is for the WUOT to be used by environmental analysts and deployed by hydropower schedulers and operators to assist in market, dispatch, and operational decisions.

  20. Life Cycle Inventory & Assessment Report: Separation of Digested Fattening Pig Slurry for Optimal P Concentration, Denmark

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Hamelin, Lorie; Wenzel, Henrik

    The purpose of this Life Cycle Assessment report is to investigate the potential for separating the digested pig manure after the biogas plant in order to optimise the utilisation of the phosphorous content of the manure. By separating, the phosphorous rich solid fraction can be brought to fields...... far away from the farm with a need for phosphorus, as the fields close to the pig farm areas usually contain abundant amounts of P. The environmental consequences of the separation has been assessed. Furthermore, the Life Cycle Assessment highlights the environmental impacts along the “manure...... management chain” for a combination of techniques: Source-segregation of manure from fattening pigs, using the solid part from the source-segregation for biogas production, utilising the biogas for heat and electricity production, separating the digested pig manure after the biogas plant in order to optimize...

  1. Automata-based Optimization of Interaction Protocols for Scalable Multicore Platforms (Technical Report)

    NARCIS (Netherlands)

    Jongmans, S.-S.T.Q.; Halle, S.; Arbab, F.

    2014-01-01

    Multicore platforms offer the opportunity for utilizing massively parallel resources. However, programming them is challenging. We need good compilers that optimize commonly occurring synchronization/interaction patterns. To facilitate optimization, a programming language must convey what needs to b

  2. Naturally fractured tight gas reservoir detection optimization. Annual report, September 1993--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-01

    This report is an annual summarization of an ongoing research in the field of modeling and detecting naturally fractured gas reservoirs. The current research is in the Piceance basin of Western Colorado. The aim is to use existing information to determine the most optimal zone or area of fracturing using a unique reaction-transport-mechanical (RTM) numerical basin model. The RTM model will then subsequently help map subsurface lateral and vertical fracture geometries. The base collection techniques include in-situ fracture data, remote sensing, aeromagnetics, 2-D seismic, and regional geologic interpretations. Once identified, high resolution airborne and spaceborne imagery will be used to verify the RTM model by comparing surficial fractures. If this imagery agrees with the model data, then a further investigation using a three-dimensional seismic survey component will be added. This report presents an overview of the Piceance Creek basin and then reviews work in the Parachute and Rulison fields and the results of the RTM models in these fields.

  3. Central Plant Optimization for Waste Energy Reduction (CPOWER). ESTCP Cost and Performance Report

    Science.gov (United States)

    2016-12-01

    EW-201349) Central Plant Optimization for Waste Energy Reduction (CPOWER) December 2016 This document has been cleared for public release...Optimization for Waste Energy Reduction (CPOWER) Girija Parthasarathy Honeywell Honeywell - 1985 Douglas Drive North, Golden Valley, MN 55422 ERDC...technology that commands all equipment in a central plant. Central Plant Optimization for Waste Energy Reduction (CPOWER), Building Automation System (BAS

  4. Design and optimization of wing tips for wind turbines. Final report; Design og optimering af vingetipper for vindmoeller. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, J.N.; Shen, W.Z.; Zhu, W.J.; Borbye, J.; Okulov, V.L.; Mikkelsen, R. (DTU Mekanik, Kgs. Lyngby (Denmark)); Gaunaa, M.; Rethore, P.-E.; Soerensen, N.N. (Danmarks Tekniske Univ. Risoe DTU, Afd. for Vindenergi, Roskilde (Denmark))

    2011-03-15

    The aim of the project was to suggest and analyse new shapes of wing tips for wind turbines to optimize their performance. Several simple wing tips and their flow topology were analysed, and the impact of different design variables was determined in order to establish which design has the best effect for the performance. For the numerical flow calculations, primarily the Navier-Stokes code EllipSys was used. As a supplement to the viscous Navier-Stokes calculations, in-viscous calculations were made using a lifting-line theory. This is a simple technique to determine the load distribution along the wing tip in those cases where viscous effects can be neglected. A large part of the project has focused on improving accuracy of the lifting-line method. Besides forming the basis for improved tip configurations, the calculations were also used to improve the so-called tip correction. Based on the numerical results from CFD calculations an improved tip correction was developed. (ln)

  5. FIVPET Flow-Induced Vibration Test Report (1) - Candidate Spacer Grid Type I (Optimized H Type)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Hee; Kang, Heung Seok; Yoon, Kyung Ho; Song, Kee Nam; Kim, Jae Yong

    2006-03-15

    The flow-induced vibration (FIV) test using a 5x5 partial fuel assembly was performed to evaluate mechanical/structural performance of the candidate spacer grid type I (Optimized H shape). From the measured vibration response of the test bundle and the flow parameters, design features of the spacer strap can be analyzed in the point of vibration and hydraulic aspect, and also compared with other spacer strap in simple comparative manner. Furthermore, the FIV test will contributes to understand behaviors of nuclear fuel in operating reactor. The FIV test results will be used to verify the theoretical model of fuel rod and assembly vibration. The aim of this report is to present the results of the FIV test of partial fuel assembly and to introduce the detailed test methodology and analysis procedure. In chapter 2, the overall configuration of test bundle and instrumented tube is remarked and chapter 3 will introduce the test facility (FIVPET) and test section. Chapter 4 deals with overall test condition and procedure, measurement and data acquisition devices, instrumentation equipment and calibration, and error analysis. Finally, test result of vibration and pressure fluctuation is presented and discussed in chapter 5.

  6. Do You Know How I Feel? Parents Underestimate Worry and Overestimate Optimism Compared to Child Self-Report

    Science.gov (United States)

    Lagattuta, Kristin Hansen; Sayfan, Liat; Bamford, Christi

    2012-01-01

    Three studies assessed parent-child agreement in perceptions of children's everyday emotions in typically developing 4- to 11-year-old children. Study 1 (N = 228) and Study 2 (N = 195) focused on children's worry and anxiety. Study 3 (N = 90) examined children's optimism. Despite child and parent reporters providing internally consistent…

  7. MOBE: Final report; Modelling and Optimization of Biomass-based Energy production

    Energy Technology Data Exchange (ETDEWEB)

    Trangbaek, K. (Aalborg Univ., Institut for Elektroniske Systemer, Aalborg (Denmark)); Elmegaard, B. (Danmarks Tekniske Univ., Institut for Mekanisk Teknologi, Kgs. Lyngby (Denmark))

    2008-07-01

    The present report is the documentation of the work in the PSO-project MOBE, ''Modelling and Optimization of biomass-based Energy production''. The aim of the project is to develop better control methods for boilers in central power plant units, so the plant will achieve better controllability with respect to load changes. in particular focus is on the low load operation near and below the Benson point. The introduction of the report includes a description of the challenges the central power stations see in the modern electricity market where wind power delivers a significant prioritized production, and thus, in connection with consumption variations, contributes to the load requirements of the central units. The report documents the work on development of a common simulation platform for the partners in the project and for future model work. The result of this is an integration between the DTU simulation code DNA and Matlab. Other possible tools are suggested. The modelling work in the project has resulted in preliminary studies of time constants of evaporator tubes, an analysis that shows that Ledinegg instabilities do not occur in modern boilers even at low load, development of a validated evaporator model that can be coupled to tools for control system development, and an analysis of two different configurations at the low load system of Benson boilers. Based in a validated power plant model different control strategies have been studied. Because constraints on control signals and temperature gradients are dominating, it is recommended to use model predictive control. It is demonstrated, how such a simulator can handle large low gradients without violating the constraints. By switching between different linearized models the whole load range may be covered. The project indicates that Model predictive control can improve the control in low low significantly. This should be studied further in future projects by realistic tests. At first these

  8. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, Kjetil; Bartzke, Gundula; Broeseth, Henrik; Dahl, Espen Lie; Gjershaug, Jan Ove; Hanssen, Frank; Jacobsen, Karl-Otto; Kleven, Oddmund; Kvaloey, Paal; May, Roel; Meaas, Roger; Nygaaard, Torgeir; Resnaes, Steinar; Stokke, Sigbjoern; Thomassen, Joern

    2012-07-01

    birds in the database, compared to only 117 a year earlier. WP5 - 'A Least Cost Path (LCP) toolbox for optimal route routing of power lines', has developed an LCP-pilot to demonstrate the LCP method, based on the impact studies were undertaken prior to construction of a 420 kV transmission line in Central Norway 2005. Relevant economic, ecological and technological environment criteria based on suggestions from interested users (NGOs, government, industry, etc.), was used. LCP-pilot and a fuzzy-logic approach of this was demonstrated in the first dialogue-based workshop, 23.-24. april 2012. The seminar, which had an emphasis on criteria definitions were followed up with a working seminar that focused criterion values ??on 20 november 2012. Lecture - 'A Least Cost Path (LCP) Toolbox for Optimal Routing of Power Lines, -was presented and submitted as contributions to the conference report from 'The 10th ROW Conference' in Arizona, 'The 32nd Annual Conference of the International Association for Impact Assessment (IAIA12) ' in Porto, Portugal, and 'The ESRI European User Conference' in Oslo. WP6 - 'Birds and camouflaging of power lines', has almost completed the final report, 'Power line camouflaging. An assessment of the ecological and technical challenges'. 'Because of the budget situation in CEDREN However, completion of the report postponed until the end of April 2013. WP7 - 'Effect of line marking / modifications remedial measures against bird mortality' has almost completed the final report 'Opportunities and limitations in terms of reducing mortality in birds due to collision and electrocution.' Due to overall budget situation in CEDREN the report deferred to the end of april 2013. WP8, 'guidelines for technological solutions that may reduce mortality in birds because of the power line's', has focused topics relating to the labeling, design, insulation, camouflage and wiring. The results, which are presented in the notes and articles, will be implemented in

  9. Cost optimal building performance requirements. Calculation methodology for reporting on national energy performance requirements on the basis of cost optimality within the framework of the EPBD

    Energy Technology Data Exchange (ETDEWEB)

    Boermans, T.; Bettgenhaeuser, K.; Hermelink, A.; Schimschar, S. [Ecofys, Utrecht (Netherlands)

    2011-05-15

    On the European level, the principles for the requirements for the energy performance of buildings are set by the Energy Performance of Buildings Directive (EPBD). Dating from December 2002, the EPBD has set a common framework from which the individual Member States in the EU developed or adapted their individual national regulations. The EPBD in 2008 and 2009 underwent a recast procedure, with final political agreement having been reached in November 2009. The new Directive was then formally adopted on May 19, 2010. Among other clarifications and new provisions, the EPBD recast introduces a benchmarking mechanism for national energy performance requirements for the purpose of determining cost-optimal levels to be used by Member States for comparing and setting these requirements. The previous EPBD set out a general framework to assess the energy performance of buildings and required Member States to define maximum values for energy delivered to meet the energy demand associated with the standardised use of the building. However it did not contain requirements or guidance related to the ambition level of such requirements. As a consequence, building regulations in the various Member States have been developed by the use of different approaches (influenced by different building traditions, political processes and individual market conditions) and resulted in different ambition levels where in many cases cost optimality principles could justify higher ambitions. The EPBD recast now requests that Member States shall ensure that minimum energy performance requirements for buildings are set 'with a view to achieving cost-optimal levels'. The cost optimum level shall be calculated in accordance with a comparative methodology. The objective of this report is to contribute to the ongoing discussion in Europe around the details of such a methodology by describing possible details on how to calculate cost optimal levels and pointing towards important factors and

  10. Final technology report for D-Area oil seepage basin bioventing optimization test, environmental restoration support

    Energy Technology Data Exchange (ETDEWEB)

    Radway, J.C.; Lombard, K.H.; Hazen, T.C.

    1997-01-24

    One method proposed for the cleanup of the D-Area Oil Seepage Basin was in situ bioremediation (bioventing), involving the introduction of air and gaseous nutrients to stimulate contaminant degradation by naturally occurring microorganisms. To test the feasibility of this approach, a bioventing system was installed at the site for use in optimization testing by the Environmental Biotechnology Section of the Savannah River Technology Center. During the interim action, two horizontal wells for a bioventing remediation system were installed eight feet below average basin grade. Nine piezometers were also installed. In September of 1996, a generator, regenerative blower, gas cylinder station, and associated piping and nutrient injection equipment were installed at the site and testing was begun. After baseline characterization of microbial activity and contaminant degradation at the site was completed, four injection campaigns were carried out. These consisted of (1) air alone, (2) air plus triethylphosphate (TEP), (3) air plus nitrous oxide, and (4) air plus methane. This report describes results of these tests, together with conclusions and recommendations for further remediation of the site. Natural biodegradation rates are high. Oxygen, carbon dioxide, and methane levels in soil gas indicate substantial levels of baseline microbial activity. Oxygen is used by indigenous microbes for biodegradation of organics via respiration and hence is depleted in the soil gas and water from areas with high contamination. Carbon dioxide is elevated in contaminated areas. High concentrations of methane, which is produced by microbes via fermentation once the oxygen has been depleted, are found at the most contaminated areas of this site. Groundwater measurements also indicated that substantial levels of natural contaminant biodegradation occurred prior to air injection.

  11. Final Report of Optimization Algorithms for Hierarchical Problems, with Applications to Nanoporous Materials

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Stephen G.

    2013-11-11

    The research focuses on the modeling and optimization of nanoporous materials. In systems with hierarchical structure that we consider, the physics changes as the scale of the problem is reduced and it can be important to account for physics at the fine level to obtain accurate approximations at coarser levels. For example, nanoporous materials hold promise for energy production and storage. A significant issue is the fabrication of channels within these materials to allow rapid diffusion through the material. One goal of our research is to apply optimization methods to the design of nanoporous materials. Such problems are large and challenging, with hierarchical structure that we believe can be exploited, and with a large range of important scales, down to atomistic. This requires research on large-scale optimization for systems that exhibit different physics at different scales, and the development of algorithms applicable to designing nanoporous materials for many important applications in energy production, storage, distribution, and use. Our research has two major research thrusts. The first is hierarchical modeling. We plan to develop and study hierarchical optimization models for nanoporous materials. The models have hierarchical structure, and attempt to balance the conflicting aims of model fidelity and computational tractability. In addition, we analyze the general hierarchical model, as well as the specific application models, to determine their properties, particularly those properties that are relevant to the hierarchical optimization algorithms. The second thrust was to develop, analyze, and implement a class of hierarchical optimization algorithms, and apply them to the hierarchical models we have developed. We adapted and extended the optimization-based multigrid algorithms of Lewis and Nash to the optimization models exemplified by the hierarchical optimization model. This class of multigrid algorithms has been shown to be a powerful tool for

  12. Final Report-Optimization Under Uncertainty and Nonconvexity: Algorithms and Software

    Energy Technology Data Exchange (ETDEWEB)

    Jeff Linderoth

    2008-10-10

    The goal of this research was to develop new algorithmic techniques for solving large-scale numerical optimization problems, focusing on problems classes that have proven to be among the most challenging for practitioners: those involving uncertainty and those involving nonconvexity. This research advanced the state-of-the-art in solving mixed integer linear programs containing symmetry, mixed integer nonlinear programs, and stochastic optimization problems.

  13. Optimal control problems with switching points. Ph.D. Thesis, 1990 Final Report

    Science.gov (United States)

    Seywald, Hans

    1991-01-01

    An overview is presented of the problems and difficulties that arise in solving optimal control problems with switching points. A brief discussion of existing optimality conditions is given and a numerical approach for solving the multipoint boundary value problems associated with the first-order necessary conditions of optimal control is presented. Two real-life aerospace optimization problems are treated explicitly. These are altitude maximization for a sounding rocket (Goddard Problem) in the presence of a dynamic pressure limit, and range maximization for a supersonic aircraft flying in the vertical, also in the presence of a dynamic pressure limit. In the second problem singular control appears along arcs with active dynamic pressure limit, which in the context of optimal control, represents a first-order state inequality constraint. An extension of the Generalized Legendre-Clebsch Condition to the case of singular control along state/control constrained arcs is presented and is applied to the aircraft range maximization problem stated above. A contribution to the field of Jacobi Necessary Conditions is made by giving a new proof for the non-optimality of conjugate paths in the Accessory Minimum Problem. Because of its simple and explicit character, the new proof may provide the basis for an extension of Jacobi's Necessary Condition to the case of the trajectories with interior point constraints. Finally, the result that touch points cannot occur for first-order state inequality constraints is extended to the case of vector valued control functions.

  14. CO2 Separation Using Thermally Optimized Membranes: A Comprehensive Project Report (2000 - 2007)

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    2008-03-04

    This is a complete (Fiscal Years 2000–2006) collection of the Idaho National Laboratory’s (INL) research and development contributions to the project, “CO2 Separation Using Thermally Optimized Membranes.” The INL scientific contribution to the project has varied due to the fluctuations in funding from year to year. The focus of the project was polybenzimidazole (PBI) membranes and developing PBI compounds (both substitution and blends) that provide good film formation and gas separation membranes. The underlying problem with PBI is its poor solubility in common solvents. Typically, PBI is dissolved in “aggressive” solvents, like N,N-dimethylacetamide (DMAc) and N methylpyrrolidone (NMP). The INL FY-03 research was directed toward making soluble N-substituted PBI polymers, where INL was very successful. Many different types of modified PBI polymers were synthesized; however, film formation proved to be a big problem with both unsubstituted and N-substituted PBIs. Therefore, INL researchers directed their attention to using plasticizers or additives to make the membranes more stable and workable. During the course of these studies, other high-performance polymers (like polyamides and polyimides) were found to be better materials, which could be used either by themselves or blends with PBI. These alternative high-performance polymers provided the best pathway forward for soluble high-temperature polymers with good stable film formation properties. At present, the VTEC polyimides (product of RBI, Inc.) are the best film formers that exhibit high-temperature resistance. INL’s gas testing results show VTEC polyimides have very good gas selectivities for both H2/CO2 and CO2/CH4. Overall, these high-performance polymers pointed towards new research areas where INL has gained a greater understanding of polymer film formation and gas separation. These studies are making possible a direct approach to stable polymer-based high-temperature gas separation membranes

  15. CO2 Separation Using Thermally Optimized Membranes: A Comprehensive Project Report (2000 - 2007)

    Energy Technology Data Exchange (ETDEWEB)

    J.R. Klaehn; C.J. Orme; E.S. Peterson; T.A. Luther; M.G. Jones; A.K. Wertsching

    2008-03-01

    This is a complete (Fiscal Years 2000–2006) collection of the Idaho National Laboratory’s (INL) research and development contributions to the project, “CO2 Separation Using Thermally Optimized Membranes.” The INL scientific contribution to the project has varied due to the fluctuations in funding from year to year. The focus of the project was polybenzimidazole (PBI) membranes and developing PBI compounds (both substitution and blends) that provide good film formation and gas separation membranes. The underlying problem with PBI is its poor solubility in common solvents. Typically, PBI is dissolved in “aggressive” solvents, like N,N-dimethylacetamide (DMAc) and N methylpyrrolidone (NMP). The INL FY-03 research was directed toward making soluble N-substituted PBI polymers, where INL was very successful. Many different types of modified PBI polymers were synthesized; however, film formation proved to be a big problem with both unsubstituted and N-substituted PBIs. Therefore, INL researchers directed their attention to using plasticizers or additives to make the membranes more stable and workable. During the course of these studies, other high-performance polymers (like polyamides and polyimides) were found to be better materials, which could be used either by themselves or blends with PBI. These alternative high-performance polymers provided the best pathway forward for soluble high-temperature polymers with good stable film formation properties. At present, the VTEC polyimides (product of RBI, Inc.) are the best film formers that exhibit high-temperature resistance. INL’s gas testing results show VTEC polyimides have very good gas selectivities for both H2/CO2 and CO2/CH4. Overall, these high-performance polymers pointed towards new research areas where INL has gained a greater understanding of polymer film formation and gas separation. These studies are making possible a direct approach to stable polymer-based high-temperature gas separation membranes

  16. Steam/fuel system optimization report: 6000-tpd SRC-I Demonstration Plant

    Energy Technology Data Exchange (ETDEWEB)

    Vakil, T.D.

    1983-07-01

    The design and configuration of the steam and fuel system for the 6000-ton-per-day (tpd) SRC-I Demonstration plant have been optimized, based on requirements for each area of the plant that were detailed in Area Baseline Designs of December 1982. The system was optimized primarily for the two most likely modes of plant operation, that is, when the expanded-bed hydrocracker (EBH) is operating at either high or low conversion, with all other units operating. However, the design, as such, is also operable under four other anticipated operating modes. The plant is self-sufficient in fuel except when the coker/calciner unit is not operating; then the required fuel oil import ranges from 80 to 125 MM Btu/h, lower heating value (LHV). The system affords stable operation under varying fuel gas availability and is reliable, flexible, and efficient. The optimization was based on maximizing overall efficiency of the steam system. The system was optimized to operate at five different steam-pressure levels, which are justifiable based on the plant's team requirements for process, heat duty, and power. All identified critical equipment drives will be run by steam turbines. Also part of the optimization was elimination of the steam evaporator in the wastewater treatment area. This minimized the impact on the steam system of operating in either the discharge of zero-discharge mode; the steam system remains essentially the same for either mode. Any further optimization efforts should be based on overall cost-effectiveness.

  17. Final Report---Optimization Under Nonconvexity and Uncertainty: Algorithms and Software

    Energy Technology Data Exchange (ETDEWEB)

    Jeff Linderoth

    2011-11-06

    the goal of this work was to develop new algorithmic techniques for solving large-scale numerical optimization problems, focusing on problems classes that have proven to be among the most challenging for practitioners: those involving uncertainty and those involving nonconvexity. This research advanced the state-of-the-art in solving mixed integer linear programs containing symmetry, mixed integer nonlinear programs, and stochastic optimization problems. The focus of the work done in the continuation was on Mixed Integer Nonlinear Programs (MINLP)s and Mixed Integer Linear Programs (MILP)s, especially those containing a great deal of symmetry.

  18. Optimal design and routing of power lines; ecological technical and economic perspectives (OPTIPOL). Final Report, findings 2009 – 2014.

    OpenAIRE

    Bevanger, Kjetil Modolv; Bartzke, Gundula; Brøseth, Henrik; Dahl, Espen Lie; Gjershaug, Jan Ove; Hanssen, Frank Ole; Jacobsen, Karl Otto; Kleven, Oddmund; Kvaløy, Pål; May, Roelof Frans; Nygård, Torgeir; Refsnæs, Steinar; Stokke, Sigbjørn; Thomassen, Jørn; Meås, Roger

    2014-01-01

    Bevanger, K., Bartzke, G., Brøseth, H., Dahl, E.L., Gjershaug, J.O., Hanssen, F., Jacobsen, K.- O., Kleven, O., Kvaløy, P., May, R., Meås, R., Nygård, T., Refsnæs, S., Stokke, S. & Thomassen, J. 2014. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Final Report; findings 2009–2014. - NINA Report 1012. 92 pp. OPTIPOL was designed by NINA in early 2008, with a particular focus on power lines and wildlife interactions. As soon as ...

  19. Development of optimal terrace pit coal mining systems. Technical progress report, October 1- October 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    McIntosh, D. G.

    1979-11-19

    A bibliography on various aspects of optimal terrace pit coal mining systems is included. Relevant federal and state legislation and regulations have been identified. Mines of interest to the project have been identified and listed for field visits. Seven regions of different climates, hydrology, geology, etc., are being studied individually. (LTN)

  20. Distributed Constrained Optimization over Constrained Communication Topologies. Technical Report IES-2014-07

    OpenAIRE

    Pfrommer, Julius

    2015-01-01

    The Max-Sum algorithm, an instance of the Generalized Distributive Law family, is known to solve Distributed Constraint Optimization Problems (DCOP) where the summed utility functions of interacting agents are maximized. However, Max-Sum relies on available communication channels between all agents that partake in a utility function. We present a generalization of Max-Sum that solves DCOP exactly in situations where the communication network layout does not match the agents' utility inter-dep...

  1. "Optimal design and routing of power lines; ecological, technical and economic perspectives” (OPTIPOL). Progress Report 2009

    OpenAIRE

    Bevanger, Kjetil Modolv; Bartzke, Gundula; Brøseth, Henrik; Gjershaug, Jan Ove; Hanssen, Frank Ole; Jacobsen, Karl Otto; Kvaløy, Pål; May, Roelof Frans; Nygård, Torgeir; Pedersen, Hans-Christian; Reitan, Ole; Refsnæs, Steinar; Stokke, Sigbjørn; Vang, Roald

    2009-01-01

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named “Optimal design and routing of power lines; ecological, technical and eco-nomic perspectives” (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the ac-tivities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 0...

  2. Final Technical Report for "Applied Mathematics Research: Simulation Based Optimization and Application to Electromagnetic Inverse Problems"

    Energy Technology Data Exchange (ETDEWEB)

    Haber, Eldad

    2014-03-17

    The focus of research was: Developing adaptive mesh for the solution of Maxwell's equations; Developing a parallel framework for time dependent inverse Maxwell's equations; Developing multilevel methods for optimization problems with inequal- ity constraints; A new inversion code for inverse Maxwell's equations in the 0th frequency (DC resistivity); A new inversion code for inverse Maxwell's equations in low frequency regime. Although the research concentrated on electromagnetic forward and in- verse problems the results of the research was applied to the problem of image registration.

  3. The optimization of production and control of hot-electron plasmas. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Dandl, R.A.; Guest, G.E.

    1991-10-01

    This report discusses the following topics: The generation rate of ECH triggered runaway electrons; space- and time-resolved measurements using free-free Bremsstrahlung; and wave propagation characteristics in the tokamak.

  4. Final Technical Report: Sparse Grid Scenario Generation and Interior Algorithms for Stochastic Optimization in a Parallel Computing Environment

    Energy Technology Data Exchange (ETDEWEB)

    Mehrotra, Sanjay [Northwestern Univ., Evanston, IL (United States)

    2016-09-07

    The support from this grant resulted in seven published papers and a technical report. Two papers are published in SIAM J. on Optimization [87, 88]; two papers are published in IEEE Transactions on Power Systems [77, 78]; one paper is published in Smart Grid [79]; one paper is published in Computational Optimization and Applications [44] and one in INFORMS J. on Computing [67]). The works in [44, 67, 87, 88] were funded primarily by this DOE grant. The applied papers in [77, 78, 79] were also supported through a subcontract from the Argonne National Lab. We start by presenting our main research results on the scenario generation problem in Sections 1–2. We present our algorithmic results on interior point methods for convex optimization problems in Section 3. We describe a new ‘central’ cutting surface algorithm developed for solving large scale convex programming problems (as is the case with our proposed research) with semi-infinite number of constraints in Section 4. In Sections 5–6 we present our work on two application problems of interest to DOE.

  5. Optimization of Rhodium-Based Catalysts for Mixed Alcohol Synthesis -- 2011 Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Mark A.; Gray, Michel J.; Albrecht, Karl O.; Rummel, Becky L.

    2011-10-01

    Pacific Northwest National Laboratory has been conducting research to investigate the feasibility of producing mixed alcohols from biomass-derived synthesis gas (syngas). In recent years, this research has primarily involved the further development of catalysts containing rhodium and manganese based on the results of earlier catalyst screening tests. Research during FY 2011 continued to examine the performance of RhMn catalysts on alternative supports including selected zeolite, silica, and carbon supports. Catalyst optimization continued using both the Davisil 645 and Merck Grade 7734 silica supports. Research also was initiated in FY 2011, using the both Davisil 645 silica and Hyperion CS-02C-063 carbon supports, to evaluate the potential for further improving catalyst performance, through the addition of one or two additional metals as promoters to the catalysts containing Rh, Mn, and Ir.

  6. Cost optimizing of large-scale offshore wind farms. Appendix A to D. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Volume 2 contains reports prepared by Nellemann, Nielsen and Rauschenberger A/S (NNR) and NNR`s 2 sub-consultants Danish Geotechnical Institute (DGI) and Danish Hydraulic Institute (DHI). It contains Appendix A - Geotechnical Review and Summary prepared by Nellemann, Nielsen and Rauschenberger A/S; Appendix B - Geotechnical Investigations, factual reports for geotechnical investigations and laboratory tests prepared by Danish Geotechnical Institute; Appendix C - Hydraulic Assessment prepared by Danish Hydraulic Institute; Appendix D - Conceptual Design and Optimisation prepared by Nellemann, Nielsen and Rauschenberger A/S. (LN)

  7. Naturally fractured tight gas reservoir detection optimization. Quarterly report, April 1--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-31

    This progress report discusses in details the geologic assessment of the Piceance Creek Basin. Analysis of the high resolution aeromagnetic survey concentrated on the high-resolution aeromagnetic data acquired by World Geoscience, but the interpretation was supplemented by examination of regional published gravity and magnetic data, as well as surface geology and subsurface geology.

  8. Pilot test and optimization of plasma based DeNO{sub x}. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Stamate, E.; Chen, W.; Michelsen, P.K. (Risoe DTU. PLF, Roskilde (Denmark)); Joergensen, L.; Jensen, T.K.; Kristensen, P.G.; Tobiasen, L.; Simonsen, P. (Dansk Gasteknisk Center, Hoersholm (Denmark))

    2010-12-15

    A technique for NO{sub x} reduction for combustion processes was examined. The technique is based on injecting ozone into the NO{sub x} containing flue gas where it will react with NO{sub x}, forming an anhydride of nitric acid, N{sub 2}O{sub 5}. N{sub 2}O{sub 5} is easily removed later using a water scrubber. The technique was tested on a gas engine based CHP unit and a CHP unit based on a straw-fired boiler and a steam turbine. It was found that: 1) NO{sub x} emissions can be reduced by more than 95 % by adding ozone to the flue gas; 2) The technique is applicable on flue gas from biomass combustion despite the presence of compounds such as SO{sub 2} and HCl; 3) Reduction of NO{sub x} emissions requires approximately half as much O{sub 3} when it is applied to the natural gas fired engine unit compared to the straw-fired boiler unit; 4) The higher O{sub 3} consumption on straw-fired units is due both to higher flue gas temperature and to larger NO{sub x} fluctuations in the flue gas compared to the gas engine unit; 5) For the gas engine unit the formaldehyde emission was reduced by 60%; 6) SO{sub 2} emissions are eliminated by the deNO{sub x} unit. It can be concluded that at present the plasma deNO{sub x} process suffers from too high capital and operating costs and too low plant operating time to be an attractive alternative for gas engine CHP plants. Furthermore, there is only a small gap of approx. 25 % between the specific ozone consumption obtained at the pilot test in Ringsted and the theoretically achievable value. This difference is too small to have a major impact on process economy in case of an optimized deNO{sub x} process. At straw fired plants the technology tends to be more promising for several reasons: 1) Significant potential for optimizing specific ozone consumption. 2) Larger NO{sub x} reduction due to the fact that higher concentration levels in the flue gas generate higher income from e.g. fertilizer sales. 3) Reduced or zero SO{sub 2

  9. Development & Optimization of Materials and Processes for a Cost Effective Photoelectrochemical Hydrogen Production System. Final report

    Energy Technology Data Exchange (ETDEWEB)

    McFarland, Eric W

    2011-01-17

    The overall project objective was to apply high throughput experimentation and combinatorial methods together with novel syntheses to discover and optimize efficient, practical, and economically sustainable materials for photoelectrochemical production of bulk hydrogen from water. Automated electrochemical synthesis and photoelectrochemical screening systems were designed and constructed and used to study a variety of new photoelectrocatalytic materials. We evaluated photocatalytic performance in the dark and under illumination with or without applied bias in a high-throughput manner and did detailed evaluation on many materials. Significant attention was given to -Fe2O3 based semiconductor materials and thin films with different dopants were synthesized by co-electrodeposition techniques. Approximately 30 dopants including Al, Zn, Cu, Ni, Co, Cr, Mo, Ti, Pt, etc. were investigated. Hematite thin films doped with Al, Ti, Pt, Cr, and Mo exhibited significant improvements in efficiency for photoelectrochemical water splitting compared with undoped hematite. In several cases we collaborated with theorists who used density functional theory to help explain performance trends and suggest new materials. The best materials were investigated in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visual spectroscopy (UV-Vis), X-ray photoelectron spectroscopy (XPS). The photoelectrocatalytic performance of the thin films was evaluated and their incident photon

  10. Turbine Reliability and Operability Optimization through the use of Direct Detection Lidar Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, David K; Lewis, Matthew J; Pavlich, Jane C; Wright, Alan D; Johnson, Kathryn E; Pace, Andrew M

    2013-02-01

    The goal of this Department of Energy (DOE) project is to increase wind turbine efficiency and reliability with the use of a Light Detection and Ranging (LIDAR) system. The LIDAR provides wind speed and direction data that can be used to help mitigate the fatigue stress on the turbine blades and internal components caused by wind gusts, sub-optimal pointing and reactionary speed or RPM changes. This effort will have a significant impact on the operation and maintenance costs of turbines across the industry. During the course of the project, Michigan Aerospace Corporation (MAC) modified and tested a prototype direct detection wind LIDAR instrument; the resulting LIDAR design considered all aspects of wind turbine LIDAR operation from mounting, assembly, and environmental operating conditions to laser safety. Additionally, in co-operation with our partners, the National Renewable Energy Lab and the Colorado School of Mines, progress was made in LIDAR performance modeling as well as LIDAR feed forward control system modeling and simulation. The results of this investigation showed that using LIDAR measurements to change between baseline and extreme event controllers in a switching architecture can reduce damage equivalent loads on blades and tower, and produce higher mean power output due to fewer overspeed events. This DOE project has led to continued venture capital investment and engagement with leading turbine OEMs, wind farm developers, and wind farm owner/operators.

  11. Optimizing cellulase mixtures for maximum rate and extent of hydrolysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Walker, L.P.; Wilson, D.B. [Cornell Univ., Ithaca, NY (United States)

    1997-03-01

    Pure Thomomonospora fusca and Trichoderma reesei cellulases and their mixtures were studied to determine the optimal set of cellulases for biomass hydrolysis. The objective was to reduce the cost of cellulase in order to help lower the overall processing cost of the enzymatic conversion of biomass cellulose to sugars, which can then be fermented into fuels and other energy-intensive chemicals. No cellulase mixture was obtained that was much better than the best commercially available preparations. However, the study has greatly increased knowledge of T. fusca cellulases, synergism, and cellulose binding, and provide evidence that future work will produce cellulases with higher activity in degrading crystalline cellulose. T. fusca cellulases may have good industrial potential because: (1) they are compatible with industrial processes that operate at elevated temperatures; (2) they retain 90% of their activity under neutral or basic conditions, which provides a great deal of flexibility in reactor design and operation; and (3) tools are now available to change specific amino acid residues in their catalytic domains and to assess how these changes influence catalysis. 74 refs.

  12. Cost optimizing of large-scale offshore wind farms. Appendix E to J. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This Volume 3 contains reports prepared by SEAS Distribution A.m.b.A. and partly by Risoe National Laboratory. Appendix E: Grid connection. Appendix F: Review of potential offshore sites. Appendix G: Optimisation of wind farm layout. Appendix G.1: Evaluation of Power Production from Three Offshore Wind Farms. Appendix H: Investments, operation and maintenance costs. Appendix I: Authority approvals and environmental investigations. Appendix J: Outline description of demonstration project. Appendix G.1 has been prepared by Risoe National Laboratory. (au)

  13. Optimization of reporter gene assay: several factors influencing detection of promoter activity

    Institute of Scientific and Technical Information of China (English)

    XUE Li-xiang; WENG Mo; ZHANG Zong-yu; TONG Tan-jun

    2007-01-01

    Background Promoter analysis is currently applied to detect the expression of the targeted gene in studies of signal transduction and transcriptional regulation. As a reporter gene, luciferase plays an important role and has been used widely in the promoter assay.Methods Human embryonic lung fibroblast cells (2BS), HeLa cells and MCF-7 cells were transfected with various genes embedded by lipofectamine. This study determined various factors that affect promoter activity determination,such as the selection of the reporter genes and internal references, the dose and the type of the vectors carrying the transcription factors, the host cells and the instruments.Results The sensitivity of the luciferase assay was much higher than that of enhanced green fluorescence protein (EGFP). Moreover, promoter activity is increased in a dose-related manner only in certain ranges outside of which the results may be reversed and the promoter activity is related to the expression vector which is carrying the cDNA.Otherwise, the length of the promoter, internal references and the host cell can also influence the promoter activity.Conclusions To detect the promoter activity accurately, a few factors including dose, vector, length and host cell which influence reporter gene assay aforementioned should be considered.

  14. Orthogonal Range Reporting: Query Lower Bounds, Optimal Structures in 3-d, and Higher Dimensional Improvements

    DEFF Research Database (Denmark)

    Afshani, Peyman; Arge, Lars Allan; Larsen, Kasper Dalgaard

    2010-01-01

    Orthogonal range reporting is the problem of storing a set of n points in d-dimensional space, such that the k points in an axis-orthogonal query box can be reported efficiently. While the 2-d version of the problem was completely characterized in the pointer machine model more than two decades ago...... data structure for the d-dimensional orthogonal range reporting problem in the pointer machine model of computation that uses S(n) space must spend Ω((log n/ log(S(n)/n))⌊d/2⌋--1) time to answer queries. Thus, if S(n)/n is poly-logarithmic, then the query time is at least Ω((log n/ log log n)⌊d/2......) to Ω((log n/ log log n)2 + k) somewhere between three and six dimensions. Finally, we show that our techniques also lead to improved structures for point location in rectilinear subdivisions, that is, the problem of storing a set of n disjoint d-dimensional axis-orthogonal rectangles...

  15. Methylene blue not ferrocene: Optimal reporters for electrochemical detection of protease activity.

    Science.gov (United States)

    González-Fernández, Eva; Avlonitis, Nicolaos; Murray, Alan F; Mount, Andrew R; Bradley, Mark

    2016-10-15

    Electrochemical peptide-based biosensors are attracting significant attention for the detection and analysis of proteins. Here we report the optimisation and evaluation of an electrochemical biosensor for the detection of protease activity using self-assembled monolayers (SAMs) on gold surfaces, using trypsin as a model protease. The principle of detection was the specific proteolytic cleavage of redox-tagged peptides by trypsin, which causes the release of the redox reporter, resulting in a decrease of the peak current as measured by square wave voltammetry. A systematic enhancement of detection was achieved through optimisation of the properties of the redox-tagged peptide; this included for the first time a side-by-side study of the applicability of two of the most commonly applied redox reporters used for developing electrochemical biosensors, ferrocene and methylene blue, along with the effect of changing both the nature of the spacer and the composition of the SAM. Methylene blue-tagged peptides combined with a polyethylene-glycol (PEG) based spacer were shown to be the best platform for trypsin detection, leading to the highest fidelity signals (characterised by the highest sensitivity (signal gain) and a much more stable background than that registered when using ferrocene as a reporter). A ternary SAM (T-SAM) configuration, which included a PEG-based dithiol, minimised the non-specific adsorption of other proteins and was sensitive towards trypsin in the clinically relevant range, with a Limit of Detection (LoD) of 250pM. Kinetic analysis of the electrochemical response with time showed a good fit to a Michaelis-Menten surface cleavage model, enabling the extraction of values for kcat and KM. Fitting to this model enabled quantitative determination of the solution concentration of trypsin across the entire measurement range. Studies using an enzyme inhibitor and a range of real world possible interferents demonstrated a selective response to trypsin

  16. Final Report: Large-Scale Optimization for Bayesian Inference in Complex Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ghattas, Omar [The University of Texas at Austin

    2013-10-15

    The SAGUARO (Scalable Algorithms for Groundwater Uncertainty Analysis and Robust Optimiza- tion) Project focuses on the development of scalable numerical algorithms for large-scale Bayesian inversion in complex systems that capitalize on advances in large-scale simulation-based optimiza- tion and inversion methods. Our research is directed in three complementary areas: efficient approximations of the Hessian operator, reductions in complexity of forward simulations via stochastic spectral approximations and model reduction, and employing large-scale optimization concepts to accelerate sampling. Our efforts are integrated in the context of a challenging testbed problem that considers subsurface reacting flow and transport. The MIT component of the SAGUARO Project addresses the intractability of conventional sampling methods for large-scale statistical inverse problems by devising reduced-order models that are faithful to the full-order model over a wide range of parameter values; sampling then employs the reduced model rather than the full model, resulting in very large computational savings. Results indicate little effect on the computed posterior distribution. On the other hand, in the Texas-Georgia Tech component of the project, we retain the full-order model, but exploit inverse problem structure (adjoint-based gradients and partial Hessian information of the parameter-to- observation map) to implicitly extract lower dimensional information on the posterior distribution; this greatly speeds up sampling methods, so that fewer sampling points are needed. We can think of these two approaches as "reduce then sample" and "sample then reduce." In fact, these two approaches are complementary, and can be used in conjunction with each other. Moreover, they both exploit deterministic inverse problem structure, in the form of adjoint-based gradient and Hessian information of the underlying parameter-to-observation map, to achieve their speedups.

  17. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, K.; Bartzke, G.; Broeseth, H.; Gjershaug, J.O.; Hanssen, F.; Jacobsen, K.-O.; Kvaloey, P.; May, R.; Nygaard, T.; Pedersen, H.C.; Reitan, O.; Refsnaes, S.; Stokke, S.; Vang, R.

    2009-12-15

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named 'Optimal design and routing of power lines; ecological, technical and economic perspectives' (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the activities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 000 km overhead power-lines, the associated rights-of-way (ROW) affect huge land areas in Norway. The overall goal is to develop predict-ing tools for optimal routing of power lines from an environmental perspective and assess technical and economic solutions to minimize conflicts with wildlife and habitat conservation. Thus, the OPTIPOL rationale is based on the belief that the negative effects of electricity transmission and distribution can be reduced with respect to birds and mammals. OPTIPOL has several ambitious objectives, and is divided into sub-projects and specific tasks. From the first of November a PhD-student became part of the project, a position that will be held for 4 years. The main objective of the PhD-activities will be to assess how and why different wildlife species use deforested areas below power lines, evaluate possible positive and negative effects of power-line ROWs, and assess the possibilities for quality improvement. Another part of the project is dedicated the effects of linear structures on movement patterns and distribution in the landscape in native deer species. Here we will examine how different spatial scales influence the processes that guide movement patterns, and responses to linear structures. Another focus will be small game species, with mountain hare, capercaillie, black grouse and hazel grouse as model species. The main objective will be to assess the impact of transforming ROW habitats into attractive small-game foraging

  18. Optimization and implementation study of plutonium disposition using existing CANDU Reactors. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Since early 1994, the Department of Energy has been sponsoring studies aimed at evaluating the merits of disposing of surplus US weapons plutonium as Mixed Oxide (MOX) fuel in existing commercial Canadian Pressurized Heavy Water reactors, known as CANDU`s. The first report, submitted to DOE in July, 1994 (the 1994 Executive Summary is attached), identified practical and safe options for the consumption of 50 to 100 tons of plutonium in 25 years in some of the existing CANDU reactors operating the Bruce A generating station, on Lake Huron, about 300 km north east of Detroit. By designing the fuel and nuclear performance to operate within existing experience and operating/performance envelope, and by utilizing existing fuel fabrication and transportation facilities and methods, a low cost, low risk method for long term plutonium disposition was developed. In December, 1995, in response to evolving Mission Requirements, the DOE requested a further study of the CANDU option with emphasis on more rapid disposition of the plutonium, and retaining the early start and low risk features of the earlier work. This report is the result of that additional work.

  19. Modeling and optimization of energy consumption in multipurpose batch plants - 2006 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Szijjarto, A.

    2006-12-15

    This annual report for the Swiss Federal Office of Energy (SFOE) takes a look at the work done in 2006 on the development of a model that is able to make prognoses concerning the energy consumption of chemical batch processes and thus enable these to be optimised. In the year under review, reliable models and software modelling tools were developed. The tools are based on commercially available simulation software. The authors note that the bottom-up model presented in the previous reports is powerful and robust enough to treat a significant amount of the process data in reasonable time. The model was tested for the modelling of energy consumption in the case-study plant during a period of two months. Up to 30 batches of 9 different products were produced in this period. The resolution of the model is discussed, which is very useful for identification of the process steps with the highest energy consumption. Energy-saving potential is noted. Based on these results, one product was chosen which is to be investigated in the final stage of the project in order to optimise the energy consumption of the case-study plant. The authors note that the methodology and software tools developed can be later applied for other products or chemical batch plants.

  20. Final Cost and Performance Report Application of Flow and Transport Optimization Codes to Groundwater Pump and Treat Systems

    Science.gov (United States)

    2004-01-01

    and treat; Remediation System Evaluation ( RSE ); Remedial Process Optimization (RPO) 16. SECURITY CLASSIFICATION OF: 19a. NAME OF RESPONSIBLE...Demolition Explosive RPO Remedial Process Optimization RSE Remediation System Evaluation SVE soil vapor extraction TCE Trichloroethylene TIO...standards in less time). Remediation System Evaluation ( RSE ) or Remedial Process Optimization (RPO) provides a broad assessment of optimization

  1. The Role of the XBRL Standard in Optimizing the Financial Reporting

    CERN Document Server

    Grosu, V; Iancu, E; Petris, R; Socoliuc, M

    2010-01-01

    When the financial information is difficult to produce, interpret, compare and analyze, we are put in the situation to face inconvenient consequences with negative repercussions, such as: the investor can give up the investment (with negative consequences on the risk equity market), the banks may not give loans, an auditor may not consider the financial statements as being credible etc. These facts allow the introduction of this paper's main objective, the eXtensible Business Reporting Language (XBRL) which is an open standard, independent and international for the treatments, opportunity, correctness, efficiency and minor costs of the financial and economical information. The XBRL will be analyzed in the second part of the paper, the history of this electronic communication language will be described, as there will also be described the promoting organizations, the base technology (the WEB and XML architecture which will be the next stage of the internet programming), and the role it has within the chain of ...

  2. Altered Passive Eruption Complicating Optimal Orthodontic Bracket Placement: A Case Report and Review of Literature

    Science.gov (United States)

    Chitra, Prasad

    2015-01-01

    An unusual case of altered passive eruption with gingival hyperpigmentation and a Class I malocclusion in a 12-year-old girl having no previous history of medication is presented. The patient reported with spacing in the upper arch, moderate crowding in the lower arch, anterior crossbite and excessive gingival tissue on the labial surfaces of teeth in both the arches. The inadequate crown lengths made placement of the orthodontic brackets difficult. Preadjusted orthodontic brackets have a very precise placement protocol which can affect tooth movement in all 3 planes of space if violated. The periodontal condition was diagnosed as altered passive eruption Type IA. Interdisciplinary treatment protocols including periodontal surgical and orthodontic procedures were used. The periodontal surgical procedures were carried out prior to orthodontic therapy and the results obtained were satisfactory. It is suggested that orthodontists should be aware of conditions like altered passive eruption and modalities of management. In most instances, orthodontic therapy is not hindered. PMID:26672498

  3. Optimal restoration of dental esthetics and function with advanced implant-supported prostheses: a clinical report.

    Science.gov (United States)

    Meulen, Peter van der; Linden, Wynand van der; Eeden, Ronnie van

    2012-07-01

    For more than 25 years, computer-aided design and computer-aided manufacturing (CAD/CAM) technology has been used in implant restorative dentistry. Today this technology offers a means of milling titanium frameworks that fit dental implants accurately. This report presents a restoratively driven protocol employing advanced implant restorative and surgical techniques. Treatment of a patient with advanced periodontitis with extensive loss of hard and soft tissues is presented. After extraction of the patient's remaining hopeless teeth, dental implants were placed, along with interim, fixed-margin abutments and abutment protection caps. Two days later, acrylic resin fixed-interim prostheses restored the patient's esthetics and partial masticatory function. After implant osseointegration, maxillary, and mandibular frameworks for definitive prostheses were milled from Ti alloy, using one specific CAD/CAM technology. The benefits of this technology are also discussed.

  4. FY08 LDRD Final Report LOCAL: Locality-Optimizing Caching Algorithms and Layouts

    Energy Technology Data Exchange (ETDEWEB)

    Lindstrom, P

    2009-02-27

    This project investigated layout and compression techniques for large, unstructured simulation data to reduce bandwidth requirements and latency in simulation I/O and subsequent post-processing, e.g. data analysis and visualization. The main goal was to eliminate the data-transfer bottleneck - for example, from disk to memory and from central processing unit to graphics processing unit - through coherent data access and by trading underutilized compute power for effective bandwidth and storage. This was accomplished by (1) designing algorithms that both enforce and exploit compactness and locality in unstructured data, and (2) adapting offline computations to a novel stream processing framework that supports pipelining and low-latency sequential access to compressed data. This report summarizes the techniques developed and results achieved, and includes references to publications that elaborate on the technical details of these methods.

  5. System-Cost-Optimized Smart EVSE for Residential Application: Final Technical Report including Manufacturing Plan

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Charles [Delta Products, Triangle Park, NC (United States)

    2015-05-15

    In the 2nd quarter of 2012, a program was formally initiated at Delta Products to develop smart-grid-enabled Electric Vehicle Supply Equipment (EVSE) product for residential use. The project was funded in part by the U.S. Department of Energy (DOE), under award DE-OE0000590. Delta products was the prime contractor to DOE during the three year duration of the project. In addition to Delta Products, several additional supplier-partners were engaged in this research and development (R&D) program, including Detroit Edison DTE, Mercedes Benz Research and Development North America, and kVA. This report summarizes the program and describes the key research outcomes of the program. A technical history of the project activities is provided, which describes the key steps taken in the research and the findings made at successive stages in the multi-stage work. The evolution of an EVSE prototype system is described in detail, culminating in prototypes shipped to Department of Energy Laboratories for final qualification. After the program history is reviewed, the key attributes of the resulting EVSE are described in terms of functionality, performance, and cost. The results clearly demonstrate the ability of this EVSE to meet or exceed DOE's targets for this program, including: construction of a working product-intent prototype of a smart-grid-enabled EVSE, with suitable connectivity to grid management and home-energy management systems, revenue-grade metering, and related technical functions; and cost reduction of 50% or more compared to typical market priced EVSEs at the time of DOE's funding opportunity announcement (FOA), which was released in mid 2011. In addition to meeting all the program goals, the program was completed within the original budget and timeline established at the time of the award. The summary program budget and timeline, comparing plan versus actual values, is provided for reference, along with several supporting explanatory notes. Technical

  6. Cost optimizing of large-scale offshore wind farms. Appendix K to Q. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This Volume 4 contains reports prepared by SEAS Distribution A.m.b.A., Risoe National Laboratory, Nellemann, Nielsen and Rauschenberger A/S (NNR), Universidad Politecnica de Madrid, National Wind Power Ltd. and Stadtwerke Rostock AG. Appendix K - Wind and wave measurements; Appendix L - Establishment of design basis (wind, wave and ice loads). Appendix M - Wake effects and wind farm modelling. Appendix N - Functional requirements and optimisation of wind turbines. Appendix O - Operation and maintenance system. Appendix O.1 - Helicopter Service (alternative). Appendix P - Cost optimising of large scale offshore wind farms in UK waters. Appendix Q - Cost optimising of large scale offshore wind farms in German waters. Appendix K, L and N have been prepared by Risoe National Laboratory. Appendix M has been prepared by Universidad Politecnica de Madrid. Appendix 0 has been prepared by SEAS Distribution A.m.b.A.. Appendix O.1 has been prepared by Nellemann, Nielsen and Rauschenberger A/S. Appendix P has been prepared by National Wind Power Ltd.. Appendix Q has been prepared by Stadtwerke Rostock AG. (au)

  7. Cytoplasmically Retargeted HSV1-tk/GFP Reporter Gene Mutants for Optimization of Noninvasive Molecular-Genetic Imaging

    Directory of Open Access Journals (Sweden)

    Vladimir Ponomarev

    2003-05-01

    Full Text Available To optimize the sensitivity of imaging HSV1-tk/GFP reporter gene expression, a series of HSV1-tk/GFP mutants was developed with altered nuclear localization and better cellular enzymatic activity, compared to that of the native HSV1-tk/GFP fusion protein (HSVi-tk/GFP. Several modifications of HSV1-tk/GFP reporter gene were performed, including targeted inactivating mutations in the nuclear localization signal (NLS, the addition of a nuclear export signal (NES, a combination of both mutation types, and a truncation of the first 135 by of the native hsvl-tk coding sequence containing a “cryptic” testicular promoter and the NLS. A recombinant HSV1-tk/GFP protein and a highly sensitive sandwich enzyme-linked immunosorbent assay for HSV1-tk/GFP were developed to quantitate the amount of reporter gene product in different assays to allow normalization of the data. These different mutations resulted in various degrees of nuclear clearance, predominant cytoplasmic distribution, and increased total cellular enzymatic activity of the HSV1-tk/GFP mutants, compared to native HSV1-tk/GFP when expressed at the same levels. This appears to be the result of improved metabolic bioavailability of cytoplasmically retargeted mutant HSV1-tk/GFP enzymes for reaction with the radiolabeled probe (e.g., FIAU. The analysis of enzymatic properties of different HSV1-tk/GFP mutants using FIAU as a substrate revealed no significant differences from that of the native HSV1-tk/GFP. Improved total cellular enzymatic activity of cytoplasmically retargeted HSV1-tk/GFP mutants observed in vitro was confirmed by noninvasive imaging of transduced subcutaneous tumor xenografts bearing these reporters using [131I]FIAU and γ-camera.

  8. TAILORING INORGANIC SORBENTS FOR SRS STRONTIUM AND ACTINIDE SEPARATIONS: OPTIMIZED MONOSODIUM TITANATE PHASE II FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, D; Thomas Peters, T; Michael Poirier, M; Mark Barnes, M; Major Thompson, M; Samuel Fink, S

    2007-06-29

    This document provides a final report of Phase II testing activities for the development of a modified monosodium titanate (MST) that exhibits improved strontium and actinide removal characteristics compared to the baseline MST material. The activities included determining the key synthesis conditions for preparation of the modified MST, preparation of the modified MST at a larger scale by a commercial vendor, demonstration of the strontium and actinide removal characteristics with actual tank waste supernate and measurement of filtration characteristics. Key findings and conclusions include the following. Testing evaluated three synthetic methods and eleven process parameters for the optimum synthesis conditions for the preparation on an improved form of MST. We selected the post synthesis method (Method 3) for continued development based on overall sorbate removal performance. We successfully prepared three batches of the modified MST using Method 3 procedure at a 25-gram scale. The laboratory prepared modified MST exhibited increased sorption kinetics with simulated and actual waste solutions and similar filtration characteristics to the baseline MST. Characterization of the modified MST indicated that the post synthesis treatment did not significantly alter the particle size distribution, but did significantly increase the surface area and porosity compared to the original MST. Testing indicated that the modified MST exhibits reduced affinity for uranium compared to the baseline MST, reducing risk of fissile loading. Shelf-life testing indicated no change in strontium and actinide performance removal after storing the modified MST for 12-months at ambient laboratory temperature. The material releases oxygen during the synthesis and continues to offgas after the synthesis at a rapidly diminishing rate until below a measurable rate after 4 months. Optima Chemical Group LLC prepared a 15-kilogram batch of the modified MST using the post synthesis procedure (Method

  9. Engineering and Physics Optimization of Breed and Burn Fast Reactor Systems: Annual and Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Kevan D. Weaver; Theron Marshall; James Parry

    2005-10-01

    containment building, and a Decay Heat Removal System (DHRS) on the natural circulation heat transfer of the core's decay heat. A baseline case for natural circulation had to be established in order to truly understand the impact of the added safety systems. This baseline case did not include a DHRS, although the current MIT design does have a DHRS that features the highly efficient Printed Circuit Heat Exchangers (PCHEs). The initial LOCA analysis revealed that the RCCS was insufficient to maintain the reactor core below the fuel matrix decomposition temperature. A guard containment was added to the model in order to maintain a prescribed backpressure during the LOCA to enhance the natural circulation. The backpressure approach did provide satisfactory natural convection during the LOCA. The necessary backpressure was 1.8 MPa, which was not especially different from the values reported by other gas fast reactor researchers. However, as the model evolved to be more physically representative of a nuclear reactor, i.e., it included radial peaking factors, inlet plenum orificing, and the degradation of SiC thermal properties as a result of irradiation, the LOCA-induced fuel temperatures were not consistently below the decomposition limit.

  10. Final report-passive safety optimization in liquid sodium-cooled reactors.

    Energy Technology Data Exchange (ETDEWEB)

    Cahalana, J. E.; Hahn, D.; Nuclear Engineering Division; Korea Atomic Energy Research Inst.

    2007-08-13

    This report summarizes the results of a three-year collaboration between Argonne National Laboratory (ANL) and the Korea Atomic Energy Research Institute (KAERI) to identify and quantify the performance of innovative design features in metallic-fueled, sodium-cooled fast reactor designs. The objective of the work was to establish the reliability and safety margin enhancements provided by design innovations offering significant potential for construction, maintenance, and operating cost reductions. The project goal was accomplished with a combination of advanced model development (Task 1), analysis of innovative design and safety features (Tasks 2 and 3), and planning of key safety experiments (Task 4). Task 1--Computational Methods for Analysis of Passive Safety Design Features: An advanced three-dimensional subassembly thermal-hydraulic model was developed jointly and implemented in ANL and KAERI computer codes. The objective of the model development effort was to provide a high-accuracy capability to predict fuel, cladding, coolant, and structural temperatures in reactor fuel subassemblies, and thereby reduce the uncertainties associated with lower fidelity models previously used for safety and design analysis. The project included model formulation, implementation, and verification by application to available reactor tests performed at EBR-II. Task 2--Comparative Analysis and Evaluation of Innovative Design Features: Integrated safety assessments of innovative liquid metal reactor designs were performed to quantify the performance of inherent safety features. The objective of the analysis effort was to identify the potential safety margin enhancements possible in a sodium-cooled, metal-fueled reactor design by use of passive safety mechanisms to mitigate low-probability accident consequences. The project included baseline analyses using state-of-the-art computational models and advanced analyses using the new model developed in Task 1. Task 3--Safety

  11. Combining cell lines to optimize isolation of human enterovirus from clinical specimens: report of 25 years of experience.

    Science.gov (United States)

    Prim, Núria; Rodríguez, Graciela; Margall, Núria; Del Cuerpo, Margarita; Trallero, Gloria; Rabella, Núria

    2013-01-01

    Cell culture is still the gold standard for the diagnosis of human enteroviruses (HEVs) although molecular techniques are required for detection of some serotypes. Due to the diversity of HEVs, a single cell line is not susceptible to all serotypes, and several lines are required to optimize the isolation of HEVs. In this study, the results of HEV isolation during the last 25 years are reported. A total of 1,192 HEVs were isolated and isolation rates varied depending on the cell line used. MRC5 cells yielded the best results (70.7%), followed by A549 cells (52.6%), RD cells (37.5%), and HEp-2 cells (29.7%). A total of 521 HEVs were characterized, and HEV-B was the most frequent species (81%). Polioviruses (PV) and HEV-A were isolated less frequently (17% and 1%, respectively). None of the cell lines detected all the enteroviruses. MRC5 cells were the most susceptible for isolation of echoviruses (85.7%) and PVs (85.4%), whereas HEp2 was the most susceptible for Coxsackieviruses B (82.6%). Some serotypes were isolated in one cell line only. 40.5% of echoviruses were isolated in MRC5 cells whereas 42.3% and 23.9% of Coxsackieviruses B were isolated in RD cells and HEp2 cells, respectively. Although A549 cells did not achieve the best performance for any enterovirus serotypes, they isolated 52.6% of the total HEVs. In view of these results, MRC5 cells, A549 cells, and RD cells should be combined to optimize isolation of HEVs. Copyright © 2012 Wiley Periodicals, Inc.

  12. The initial mass functions of M31 and M32 through far red stellar absorption features

    CERN Document Server

    Zieleniewski, Simon; Thatte, Niranjan; Davies, Roger L

    2015-01-01

    Using the Oxford Short Wavelength Integral Field specTrograph (SWIFT), we investigate radial variations of several initial mass function (IMF) dependent absorption features in M31 and M32. We obtain high signal-to-noise spectra at six pointings along the major axis of M31 out to ~ 700'' (2.7 kpc) and a single pointing of the central 10 pc for M32. In M31 the sodium NaI {\\lambda}8190 index shows a flat equivalent width profile at ~ 0.4 {\\AA} through the majority of the bulge, with a strong gradient up to 0.8 {\\AA} in the central 10'' (38 pc); the Wing-Ford FeH {\\lambda}9916 index is measured to be constant at 0.4 {\\AA} for all radii; and calcium triplet CaT {\\lambda}8498, 8542, 8662 shows a gradual increase through the bulge towards the centre. M32 displays flat profiles for all three indices, with FeH at ~ 0.5 {\\AA}, very high CaT at ~ 0.8 {\\AA} and low NaI at ~ 0.1 {\\AA}. We analyse these data using stellar population models. We find that M31 is well described on all scales by a Chabrier IMF, with a gradient...

  13. Far-Red Light Activatable, Multifunctional Prodrug for Fluorescence Optical Imaging and Combinational Treatment

    OpenAIRE

    Bio, Moses; Rajaputra, Pallavi; Nkepang, Gregory; You, Youngjae

    2014-01-01

    We recently developed “photo-unclick chemistry”, a novel chemical tool involving the cleavage of aminoacrylate by singlet oxygen, and demonstrated its application to visible light-activatable prodrugs. In this study, we prepared an advanced multifunctional prodrug, Pc-(L-CA4)2, composed of the fluorescent photosensitizer phthalocyanine (Pc), an SO-labile aminoacrylate linker (L), and a cytotoxic drug combretastatin A-4 (CA4). Pc-(L-CA4)2 had reduced dark toxicity compared with CA4. However, o...

  14. Optimism measured pre-operatively is associated with reduced pain intensity and physical symptom reporting after coronary artery bypass graft surgery

    Science.gov (United States)

    Ronaldson, Amy; Poole, Lydia; Kidd, Tara; Leigh, Elizabeth; Jahangiri, Marjan; Steptoe, Andrew

    2014-01-01

    Objective Optimism is thought to be associated with long-term favourable outcomes for patients undergoing coronary artery bypass graft (CABG) surgery. Our objective was to examine the association between optimism and post-operative pain and physical symptoms in CABG patients. Methods We assessed optimism pre-operatively in 197 adults undergoing CABG surgery, and then followed them up 6–8 weeks after the procedure to measure affective pain, pain intensity, and physical symptom reporting directly pertaining to CABG surgery. Results Greater optimism measured pre-operatively was significantly associated with lower pain intensity (β = − 0.150, CI = − 0.196 to − 0.004, p = .042) and fewer physical symptoms following surgery (β = − 0.287, CI = − 0.537 to − 0.036, p = .025), but not with affective pain, after controlling for demographic, clinical and behavioural covariates, including negative affectivity. Conclusions Optimism is a modest, yet significant, predictor of pain intensity and physical symptom reporting after CABG surgery. Having positive expectations may promote better recovery. PMID:25129850

  15. Plasmid transfection in bovine cells: Optimization using a realtime monitoring of green fluorescent protein and effect on gene reporter assay.

    Science.gov (United States)

    Osorio, Johan S; Bionaz, Massimo

    2017-08-30

    Gene reporter technology (GRT) has opened several new avenues for monitoring biological events including the activation of transcription factors, which are central to the study of nutrigenomics. However, this technology relies heavily on the insertion of foreign plasmid DNA into the nuclei of cells (i.e., transfection), which can be very challenging and highly variable among cell types. The objective of this study was to investigate the optimal conditions to generate reliable GRT assay data on bovine immortalized cell lines, Madin Darby Bovine Kidney (MDBK) and bovine mammary epithelial alveolar (MACT) cells. Results are reported for two experiments. In Experiment 1, using 96 well-plate and a robotic inverted fluorescent microscope, we compared transfection efficiency among commercially available transfection reagents (TR) Lipofectamine® 3000 (Lipo3), Lipofectamine® LTX (LipoLTX), and TransIT-X2® (TransX2), three doses of TR (i.e., 0.15, 0.3, and 0.4μL/well), and three doses of Green Fluorescent Protein plasmid DNA (i.e., 10, 25, and 50ng/well). Transfection efficiency and mortality rate were analyzed using CellProfiler software. Transfection efficiency increased until the end of the experiment (20h post-transfection) at which point MACT had greater transfection than MDBK cells (16.3% vs. 2.2%). It is unclear the reason for the low transfection in MDBK cells. Maximal transfection efficiency was obtained with 0.3μL/well of LipoLTX plus 25ng/well of plasmid DNA (ca. 29.5±1.9%) and 0.15μL/well of LipoLTX plus 25ng/well of plasmid DNA (ca. 4.0±0.4%) for MACT and MDBK cells, respectively. The higher amount of TR and DNA was generally associated with higher cell mortality. Using high, medium, and low transfection efficiency conditions determined in Experiment 1, we performed a GRT assay for peroxisome proliferator-activated response element (PPRE) luciferase in MACT and MDBK cells treated with 10nM or 100nM of synthetic Peroxisome Proliferator-activated Receptor

  16. Report of the Fusion Energy Sciences Advisory Committee. Panel on Integrated Simulation and Optimization of Magnetic Fusion Systems

    Energy Technology Data Exchange (ETDEWEB)

    Dahlburg, Jill [General Atomics, San Diego, CA (United States); Corones, James [Krell Inst., Ames, IA (United States); Batchelor, Donald [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bramley, Randall [Indiana Univ., Bloomington, IN (United States); Greenwald, Martin [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Jardin, Stephen [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Krasheninnikov, Sergei [Univ. of California, San Diego, CA (United States); Laub, Alan [Univ. of California, Davis, CA (United States); Leboeuf, Jean-Noel [Univ. of California, Los Angeles, CA (United States); Lindl, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lokke, William [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rosenbluth, Marshall [Univ. of California, San Diego, CA (United States); Ross, David [Univ. of Texas, Austin, TX (United States); Schnack, Dalton [Science Applications International Corporation, Oak Ridge, TN (United States)

    2002-11-01

    Fusion is potentially an inexhaustible energy source whose exploitation requires a basic understanding of high-temperature plasmas. The development of a science-based predictive capability for fusion-relevant plasmas is a challenge central to fusion energy science, in which numerical modeling has played a vital role for more than four decades. A combination of the very wide range in temporal and spatial scales, extreme anisotropy, the importance of geometric detail, and the requirement of causality which makes it impossible to parallelize over time, makes this problem one of the most challenging in computational physics. Sophisticated computational models are under development for many individual features of magnetically confined plasmas and increases in the scope and reliability of feasible simulations have been enabled by increased scientific understanding and improvements in computer technology. However, full predictive modeling of fusion plasmas will require qualitative improvements and innovations to enable cross coupling of a wider variety of physical processes and to allow solution over a larger range of space and time scales. The exponential growth of computer speed, coupled with the high cost of large-scale experimental facilities, makes an integrated fusion simulation initiative a timely and cost-effective opportunity. Worldwide progress in laboratory fusion experiments provides the basis for a recent FESAC recommendation to proceed with a burning plasma experiment (see FESAC Review of Burning Plasma Physics Report, September 2001). Such an experiment, at the frontier of the physics of complex systems, would be a huge step in establishing the potential of magnetic fusion energy to contribute to the world’s energy security. An integrated simulation capability would dramatically enhance the utilization of such a facility and lead to optimization of toroidal fusion plasmas in general. This science-based predictive capability, which was cited in the FESAC

  17. Nuclear Energy Plant Optimization (NEPO) final report on aging and condition monitoring of low-voltage cable materials.

    Energy Technology Data Exchange (ETDEWEB)

    Assink, Roger Alan; Gillen, Kenneth Todd; Bernstein, Robert

    2005-11-01

    This report summarizes results generated on a 5-year cable-aging program that constituted part of the Nuclear Energy Plant Optimization (NEPO) program, an effort cosponsored by the U. S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The NEPO cable-aging effort concentrated on two important issues involving the development of better lifetime prediction methods as well as the development and testing of novel cable condition-monitoring (CM) techniques. To address improved life prediction methods, we first describe the use of time-temperature superposition principles, indicating how this approach improves the testing of the Arrhenius model by utilizing all of the experimentally generated data instead of a few selected and processed data points. Although reasonable superposition is often found, we show several cases where non-superposition is evident, a situation that violates the constant acceleration assumption normally used in accelerated aging studies. Long-term aging results over extended temperature ranges allow us to show that curvature in Arrhenius plots for elongation is a common occurrence. In all cases the curvature results in a lowering of the Arrhenius activation energy at lower temperatures implying that typical extrapolation of high temperature results over-estimates material lifetimes. The long-term results also allow us to test the significance of extrapolating through the crystalline melting point of semi-crystalline materials. By utilizing ultrasensitive oxygen consumption (UOC) measurements, we show that it is possible to probe the low temperature extrapolation region normally inaccessible to conventional accelerated aging studies. This allows the quantitative testing of the often-used Arrhenius extrapolation assumption. Such testing indicates that many materials again show evidence of ''downward'' curvature (E{sub a} values drop as the aging temperature is lowered) consistent with the limited

  18. Descriptor-variable approach to modeling and optimization of large-scale systems. Final report, March 1976--February 1979

    Energy Technology Data Exchange (ETDEWEB)

    Stengel, D N; Luenberger, D G; Larson, R E; Cline, T B

    1979-02-01

    A new approach to modeling and analysis of systems is presented that exploits the underlying structure of the system. The development of the approach focuses on a new modeling form, called 'descriptor variable' systems, that was first introduced in this research. Key concepts concerning the classification and solution of descriptor-variable systems are identified, and theories are presented for the linear case, the time-invariant linear case, and the nonlinear case. Several standard systems notions are demonstrated to have interesting interpretations when analyzed via descriptor-variable theory. The approach developed also focuses on the optimization of large-scale systems. Descriptor variable models are convenient representations of subsystems in an interconnected network, and optimization of these models via dynamic programming is described. A general procedure for the optimization of large-scale systems, called spatial dynamic programming, is presented where the optimization is spatially decomposed in the way standard dynamic programming temporally decomposes the optimization of dynamical systems. Applications of this approach to large-scale economic markets and power systems are discussed.

  19. Mathematical methods in material science and large scale optimization workshops: Final report, June 1, 1995-November 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, A. [Minnesota Univ., Minneapolis, MN (United States). Inst. for Mathematics and Its Applications

    1996-12-01

    The summer program in Large Scale Optimization concentrated largely on process engineering, aerospace engineering, inverse problems and optimal design, and molecular structure and protein folding. The program brought together application people, optimizers, and mathematicians with interest in learning about these topics. Three proceedings volumes are being prepared. The year in Materials Sciences deals with disordered media and percolation, phase transformations, composite materials, microstructure; topological and geometric methods as well as statistical mechanics approach to polymers (included were Monte Carlo simulation for polymers); miscellaneous other topics such as nonlinear optical material, particulate flow, and thin film. All these activities saw strong interaction among material scientists, mathematicians, physicists, and engineers. About 8 proceedings volumes are being prepared.

  20. Development of Optimal CZTS Device Structure: Cooperative Research and Development Final Report, CRADA Number CRD-12-476

    Energy Technology Data Exchange (ETDEWEB)

    van Hest, Maikel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    Suntricity Corporation and NREL will develop an optimal CZTS device structure. In this process absorber materials provided by Suntricity Corporation will be used for testing. For this purpose Suntricity Corporation will provide dried film precursors or ink precursors. NREL will process these into PV material and complete cells with buffer, window and contacts.

  1. Optimally Stopped Optimization

    Science.gov (United States)

    Vinci, Walter; Lidar, Daniel A.

    2016-11-01

    We combine the fields of heuristic optimization and optimal stopping. We propose a strategy for benchmarking randomized optimization algorithms that minimizes the expected total cost for obtaining a good solution with an optimal number of calls to the solver. To do so, rather than letting the objective function alone define a cost to be minimized, we introduce a further cost-per-call of the algorithm. We show that this problem can be formulated using optimal stopping theory. The expected cost is a flexible figure of merit for benchmarking probabilistic solvers that can be computed when the optimal solution is not known and that avoids the biases and arbitrariness that affect other measures. The optimal stopping formulation of benchmarking directly leads to a real-time optimal-utilization strategy for probabilistic optimizers with practical impact. We apply our formulation to benchmark simulated annealing on a class of maximum-2-satisfiability (MAX2SAT) problems. We also compare the performance of a D-Wave 2X quantum annealer to the Hamze-Freitas-Selby (HFS) solver, a specialized classical heuristic algorithm designed for low-tree-width graphs. On a set of frustrated-loop instances with planted solutions defined on up to N =1098 variables, the D-Wave device is 2 orders of magnitude faster than the HFS solver, and, modulo known caveats related to suboptimal annealing times, exhibits identical scaling with problem size.

  2. Optimization and Optimal Control

    CERN Document Server

    Chinchuluun, Altannar; Enkhbat, Rentsen; Tseveendorj, Ider

    2010-01-01

    During the last four decades there has been a remarkable development in optimization and optimal control. Due to its wide variety of applications, many scientists and researchers have paid attention to fields of optimization and optimal control. A huge number of new theoretical, algorithmic, and computational results have been observed in the last few years. This book gives the latest advances, and due to the rapid development of these fields, there are no other recent publications on the same topics. Key features: Provides a collection of selected contributions giving a state-of-the-art accou

  3. Engineered Osmosis for Energy Efficient Separations: Optimizing Waste Heat Utilization FINAL SCIENTIFIC REPORT DOE F 241.3

    Energy Technology Data Exchange (ETDEWEB)

    NATHAN HANCOCK

    2013-01-13

    chosen process stimulation software was required to improve the reliability of process simulations for engineering design support. Data from experiments was also employed to calculate critical mass transfer and system design parameters (such as the height equivalent to a theoretical plate (HETP)) to aid in process design. When measured in a less than optimal design state for the stripping of NH{sub 3} and CO{sub 2} from a simulated dilute draw solution the HETP for one type of commercial stripper packing material was 1.88 ft/stage. During this study it was observed that the heat duty required to vaporize the draw solution solutes is substantially affected by the amount of water boilup also produced to achieve a low NH{sub 3} stripper bottoms concentration specification. Additionally, fluid loading of the stripper packing media is a critical performance parameter that affects all facets of optimum stripper column performance. Condensation of the draw solution tops vapor requires additional process considerations if being conducted in sub-atmospheric conditions and low temperature. Future work will focus on the commercialization of the Oasys EO technology platform for numerous applications in water and wastewater treatment as well as harvesting low enthalpy energy with our proprietary osmotic heat engine. Engineering design related to thermal integration of Oasys EO technology for both low and hig-grade heat applications is underway. Novel thermal recovery processes are also being investigated in addition to the conventional approaches described in this report. Oasys Water plans to deploy commercial scale systems into the energy and zero liquid discharge markets in 2013. Additional process refinement will lead to integration of low enthalpy renewable heat sources for municipal desalination applications.

  4. Energy optimal control strategies for electro motors; low-cost and sensorless PWM-VSI based induction motor control. Vol. 1: Main report, appendix and annex

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamsen, F.

    1998-02-01

    When variable speed induction motor drives are used in applications that run at low load for long periods, energy can be saved by reducing the motor flux at low load. In this report the efficiency of 2.2 kW standard and high-efficiency motor drives are investigated experimentally with efficiency optimized and constant flux control, with sinusoidal and PWM voltage supply and with varying switching frequency. Steady-state motor models are developed and verified experimentally, and are used to analyze and develop efficiency optimizing control strategies. Four energy optimal control strategies are tested experimentally: cos({phi}) control, model-based control, off-line calculated airgap flux control and stator current/input power minimising search control. Their dynamical properties and their ability to reject load disturbances are analysed. Their ability to save energy is tested on a water pump system. For a typical predefined test-cycle the energy optimal control reduces the energy consumption with 10% compared with classical constant V/Hz control. (au)

  5. Technical Report on the Development of Mutant Paracoccus strain and Optimization of Medium Composition for the Mass Production of Astaxanthin

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jong Il; Lee, Ju Woon; Kim, Jae Hun; Song, Beom Seok

    2010-08-15

    Astaxanthin is used to role of provitamin A, and it is stronger antioxidant activity than vitamin E (100-500 times higher activity) and other carotenoids (10-fold). Furthermore, astaxanthin is also used as a nutraceutical and a medicinal ingredient against degenerative diseases such as cancer, heart disease, and skin related illness. The objective of this study was develop a carotenoid-hyperproducing mutant of Paracoccus N81106 using gamma irradiation and optimized medium composition. A mutant of Paracoccus having higher carotenoid content was isolated, and the production medium was optimized using response surface methodology. These results support that astaxanthin with strong antioxidant activity could be economically produced using the mutant and will be helpful for the related industry

  6. Application of numerical methods to extend capabilities for optimal rocket guidance: report on reentry guidance of shuttle orbiter

    Science.gov (United States)

    1972-01-01

    Analytical models are presented for optimal trajectories and reentry guidance of the space shuttle orbiter. Major emphasis is placed on the development of a "footprint', which refers to a set of reachable destination positions attainable by the shuttle at a specified terminal altitude. An unconstrained reentry footprint was calculated for a shuttle vehicle which enters the earth's atmosphere at 93 km initial altitude after a deboost from a near earth orbit. The method of computation is briefly described, and graphs are presented which illustrate the footprint and the variation of state and control variables along it. The effects of constraints and of variations in initial state upon the footprint are discussed.

  7. Determinants of self-reported smoking and misclassification during pregnancy, and analysis of optimal cut-off points for urinary cotinine: a cross-sectional study.

    Science.gov (United States)

    Aurrekoetxea, Juan J; Murcia, Mario; Rebagliato, Marisa; López, María José; Castilla, Ane Miren; Santa-Marina, Loreto; Guxens, Mónica; Fernández-Somoano, Ana; Espada, Mercedes; Lertxundi, Aitana; Tardón, Adonina; Ballester, Ferran

    2013-01-24

    To estimate the prevalence and factors associated with smoking and misclassification in pregnant women from INMA (INfancia y Medio Ambiente, Environment and Childhood) project, Spain, and to assess the optimal cut-offs for urinary cotinine (UC) that best distinguish daily and occasional smokers with varying levels of second-hand smoke (SHS) exposure. We used logistic regression models to study the relationship between sociodemographic variables and self-reported smoking and misclassification (self-reported non-smokers with UC >50 ng/ml). Receiver operating characteristic (ROC) curves were used to calculate the optimal cut-off point for discriminating smokers. The cut-offs were also calculated after stratification among non-smokers by the number of sources of SHS exposure. The cut-off points used to discriminate smoking status were the level of UC given by Youden's index and for 50 and 100 ng/ml for daily smokers, or 25 and 50 ng/ml for occasional smokers. At the third trimester of pregnancy, 2263 pregnant women of the INMA Project were interviewed between 2004 and 2008 and a urine sample was collected. Prevalence of self-reported smokers at the third trimester of pregnancy was 18.5%, and another 3.9% misreported their smoking status. Variables associated with self-reported smoking and misreporting were similar, including born in Europe, educational level and exposure to SHS. The optimal cut-off was 82 ng/ml (95% CI 42 to 133), sensitivity 95.2% and specificity 96.6%. The area under the ROC curve was 0.986 (95% CI 0.982 to 0.990). The cut-offs varied according to the SHS exposure level being 42 (95% CI 27 to 57), 82 (95% CI 46 to 136) and 106 ng/ml (95% CI 58 to 227) for not being SHS exposed, exposed to one, and to two or more sources of SHS, respectively. The optimal cut-off for discriminating occasional smokers from non-smokers was 27 ng/ml (95% CI 11 to 43). Prevalence of smoking during pregnancy in Spain remains high. UC is a reliable biomarker for classifying

  8. Determinants of self-reported smoking and misclassification during pregnancy, and analysis of optimal cut-off points for urinary cotinine: a cross-sectional study

    Science.gov (United States)

    Aurrekoetxea, Juan J; Murcia, Mario; Rebagliato, Marisa; López, María José; Castilla, Ane Miren; Santa-Marina, Loreto; Guxens, Mónica; Fernández-Somoano, Ana; Espada, Mercedes; Lertxundi, Aitana; Tardón, Adonina; Ballester, Ferran

    2013-01-01

    Objectives To estimate the prevalence and factors associated with smoking and misclassification in pregnant women from INMA (INfancia y Medio Ambiente, Environment and Childhood) project, Spain, and to assess the optimal cut-offs for urinary cotinine (UC) that best distinguish daily and occasional smokers with varying levels of second-hand smoke (SHS) exposure. Design We used logistic regression models to study the relationship between sociodemographic variables and self-reported smoking and misclassification (self-reported non-smokers with UC >50 ng/ml). Receiver operating characteristic (ROC) curves were used to calculate the optimal cut-off point for discriminating smokers. The cut-offs were also calculated after stratification among non-smokers by the number of sources of SHS exposure. The cut-off points used to discriminate smoking status were the level of UC given by Youden's index and for 50 and 100 ng/ml for daily smokers, or 25 and 50 ng/ml for occasional smokers. Participants At the third trimester of pregnancy, 2263 pregnant women of the INMA Project were interviewed between 2004 and 2008 and a urine sample was collected. Results Prevalence of self-reported smokers at the third trimester of pregnancy was 18.5%, and another 3.9% misreported their smoking status. Variables associated with self-reported smoking and misreporting were similar, including born in Europe, educational level and exposure to SHS. The optimal cut-off was 82 ng/ml (95% CI 42 to 133), sensitivity 95.2% and specificity 96.6%. The area under the ROC curve was 0.986 (95% CI 0.982 to 0.990). The cut-offs varied according to the SHS exposure level being 42 (95% CI 27 to 57), 82 (95% CI 46 to 136) and 106 ng/ml (95% CI 58 to 227) for not being SHS exposed, exposed to one, and to two or more sources of SHS, respectively. The optimal cut-off for discriminating occasional smokers from non-smokers was 27 ng/ml (95% CI 11 to 43). Conclusions Prevalence of smoking during pregnancy in

  9. Compare optimized performance results for packaged RTU using all alternative refrigerants FY17 1st Quarter Milestone Report

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Abdelaziz, Omar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shrestha, Som S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Elatar, Ahmed F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    Based on the laboratory investigation in FY16, for R-22 and R-410A alternative low GWP refrigerants in two baseline rooftop air conditioners (RTU), we used the DOE/ORNL Heat Pump Design Model to model the two RTUs and calibrated the models against the experimental data. Using the calibrated equipment models, we compared the compressor efficiencies, heat exchanger performances. An efficiency-based compressor mapping method was developed, which is able to predict compressor performances of the alternative low GWP refrigerants accurately. Extensive model-based optimizations were conducted to provide a fair comparison between all the low GWP candidates by selecting their preferred configurations at the same cooling capacity and compressor efficiencies.

  10. Optimization of biological phosphorus and ammonia removal in a combined fixed and suspended growth wastewater treatment system: Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This project was conducted to optimize design and operational criteria for enhanced biological phosphorus removal and nitrification of ammonia in the fixed growth reactor-suspended growth reactor (FGR-SGR) process. The research completed the investigation of optimum hydraulic retention times for biological phosphorus removal in both the unaerated and aerated phases of the suspended growth components of the FGR-SGR system, including an assessment of the possibility of reducing suspended growth aeration requirements by using oxidized forms of nitrogen rather than dissolved oxygen for biological phosphorus uptake; investigated the effects on biological phosphorus removal and nitrification of varying the internal recycle flow rates; and investigated the optimum solids retention time, or the optimum operating mixed liquor suspended solids concentration, in the suspended growth component of the system for biological phosphorus removal and nitrification-denitrification.

  11. Optimization of Surfactant Mixtures and Their Interfacial Behavior for Advanced Oil Recovery, Annual Report, September 30, 1999-September 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Somasundaran, Prof. P.

    2001-04-04

    The goal of this report is to develop improved extraction processes to mobilize and produce the oil left untapped using conventional techniques. Current chemical schemes for recovering the residual oil have been in general less than satisfactory. High cost of the processes as well as significant loss of chemicals by adsorption on reservoir materials and precipitation has limited the utility of chemical-flooding operations. There is a need to develop cost-effective, improved reagent schemes to increase recovery from domestic oil reservoirs. The goal of the report was to develop and evaluate novel mixtures of surfactants for improved oil recovery.

  12. Optimization of the DEC-air handling process. Final report; Optimierung der Komponenten des DEC-Klimasystems. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Franzke, U.; Stangl, M.

    2000-02-15

    The energy consumption of buildings caused by air conditioning is high. The main reason is the using of refrigeration machines for dehumidification under the dew point. A reduction of the energy consumption is possible in case of using of desiccant dehumidification. A desiccant cooling air handling unit realizes the dehumidification by desiccants. Further more a heat recovery wheel and a humidifier are necessary. In the framework of the project the desiccant wheel and a high-pressure humidifier are investigated. A refrigeration machine was installed only for theoretical investigations. The investigation was done in the theoretical and experimental way. A new simulation model was developed. The measurement values are used for the verification of the mathematical simulation. In the framework of the project the performance characteristics of the desiccant wheel and the humidifier are optimized. As a result the regeneration temperature is now lower than at the beginning of the work. The humidifier capacity is in the same range at lower fresh water consumption. The components of the desiccant cooling air-handling unit were optimized according their performance characteristic. For the company Klingenburg the market chances will increase in case of more applications. (orig.) [German] Die Klimatisierung von Gebaeuden ist in aller Regel mit einem grossen Energieaufwand verbunden. Hauptursache dafuer ist die Verwendung der Entfeuchtung durch Taupunktunterschreitung unter Nutzung von Kaeltemaschinen. Eine Verringerung des Energieaufwandes ist nur durch Einsatz der sorptiven Luftentfeuchtung moeglich. Eine DEC-Klimaanlage realisiert die Luftentfeuchtung mit Hilfe der Sorption. Sie setzt sich aus verschiedenen Komponenten zusammen. Im Rahmen des Forschungsvorhabens wurden besonders der Sorptionsregenerator und der Kaltdampfgenerator sowohl experimentell als auch theoretisch untersucht und optimiert. Als ergaenzende Systemkomponente kommt die Kaeltemaschine hinzu, die jedoch

  13. Flavones as Quorum Sensing Inhibitors Identified by a Newly Optimized Screening Platform Using Chromobacterium violaceum as Reporter Bacteria.

    Science.gov (United States)

    Skogman, Malena E; Kanerva, Sonja; Manner, Suvi; Vuorela, Pia M; Fallarero, Adyary

    2016-09-10

    Quorum sensing (QS) is the process by which bacteria produce and detect signal molecules to coordinate their collective behavior. This intercellular communication is a relevant target for anti-biofilm therapies. Here we have optimized a screening-applicable assay to search for new quorum sensing inhibitors from natural compound libraries. In this system, QS is correlated with the production of violacein, which is directly controlled by the LuxI/LuxR system in Chromobacterium violaceum ATCC 31532. The parallel use of C. violaceum Tn5-mutant CV026, which depends on auto-inducer addition, allows simultaneous discrimination of compounds that act as quenchers of the AHL signal (quorum quenchers). The incorporation of a redox stain into the platform allowed further distinction between QS inhibitors, quorum quenchers and antibacterial compounds. A pilot screening was performed with 465 natural and synthetic flavonoids. All the most active compounds were flavones and they displayed potencies (IC50) in the range of 3.69 to 23.35 μM. These leads were particularly promising as they inhibited the transition from microcolonies into mature biofilms from Escherichia coli and Pseudomonas aeruginosa strains. This approach can be very effective in identifying new antimicrobials posing lesser risks of resistance.

  14. Recommendations for standardizing glucose reporting and analysis to optimize clinical decision making in diabetes: the Ambulatory Glucose Profile (AGP).

    Science.gov (United States)

    Bergenstal, Richard M; Ahmann, Andrew J; Bailey, Timothy; Beck, Roy W; Bissen, Joan; Buckingham, Bruce; Deeb, Larry; Dolin, Robert H; Garg, Satish K; Goland, Robin; Hirsch, Irl B; Klonoff, David C; Kruger, Davida F; Matfin, Glenn; Mazze, Roger S; Olson, Beth A; Parkin, Christopher; Peters, Anne; Powers, Margaret A; Rodriguez, Henry; Southerland, Phil; Strock, Ellie S; Tamborlane, William; Wesley, David M

    2013-03-01

    Abstract Underutilization of glucose data and lack of easy and standardized glucose data collection, analysis, visualization, and guided clinical decision making are key contributors to poor glycemic control among individuals with type 1 diabetes. An expert panel of diabetes specialists, facilitated by the International Diabetes Center and sponsored by the Helmsley Charitable Trust, met in 2012 to discuss recommendations for standardization of analysis and presentation of glucose monitoring data, with the initial focus on data derived from CGM systems. The panel members were introduced to a universal software report, the Ambulatory Glucose Profile (AGP), and asked to provide feedback on its content and functionality, both as a research tool and in clinical settings. This paper provides a summary of the topics and issues discussed during the meeting and presents recommendations from the expert panel regarding the need to standardize glucose profile summary metrics and the value of a uniform glucose report to aid clinicians, researchers, and patients.

  15. Recommendations for standardizing glucose reporting and analysis to optimize clinical decision making in diabetes: the ambulatory glucose profile.

    Science.gov (United States)

    Bergenstal, Richard M; Ahmann, Andrew J; Bailey, Timothy; Beck, Roy W; Bissen, Joan; Buckingham, Bruce; Deeb, Larry; Dolin, Robert H; Garg, Satish K; Goland, Robin; Hirsch, Irl B; Klonoff, David C; Kruger, Davida F; Matfin, Glenn; Mazze, Roger S; Olson, Beth A; Parkin, Christopher; Peters, Anne; Powers, Margaret A; Rodriguez, Henry; Southerland, Phil; Strock, Ellie S; Tamborlane, William; Wesley, David M

    2013-01-01

    Underutilization of glucose data and lack of easy and standardized glucose data collection, analysis, visualization, and guided clinical decision making are key contributors to poor glycemic control among individuals with type 1 diabetes mellitus. An expert panel of diabetes specialists, facilitated by the International Diabetes Center and sponsored by the Helmsley Charitable Trust, met in 2012 to discuss recommendations for standardizing the analysis and presentation of glucose monitoring data, with the initial focus on data derived from continuous glucose monitoring systems. The panel members were introduced to a universal software report, the Ambulatory Glucose Profile, and asked to provide feedback on its content and functionality, both as a research tool and in clinical settings. This article provides a summary of the topics and issues discussed during the meeting and presents recommendations from the expert panel regarding the need to standardize glucose profile summary metrics and the value of a uniform glucose report to aid clinicians, researchers, and patients.

  16. Delayed ischemic cecal perforation despite optimal decompression after placement of a self-expanding metal stent: report of a case

    DEFF Research Database (Denmark)

    Knop, Filip Krag; Pilsgaard, Bo; Meisner, Søren

    2004-01-01

    Endoscopic deployment of self-expanding metal stents offers an alternative to surgical intervention in rectocolonic obstructions. Reported clinical failures in the literature are all related to the site of stent placement. We report a case of serious intra-abdominal disease after technically...... and clinically successful stent deployment: a potentially dangerous situation of which the surgeon should be aware. A previously healthy 72-year-old female was referred to our department with symptoms of an obstructing colorectal tumor. Successful stent placement resulted in resolution of the obstructive......, probably caused by ischemic conditions developed before stent-decompression of the colon was revealed during the operation. The patient died in the postoperative course. We discuss the observation of patients treated with self-expanding metal stents based on the selection-strategy used to allocate patients...

  17. Optimization of Ebb Shoal Mining and Beach Nourishment at St. Johns County, St. Augustine Inlet, Florida, Report 3

    Science.gov (United States)

    2012-08-01

    trajectory of a sediment budget using GenCade ........................... 42  4.3  Role of projects on the future sediment budget...Manager, Dr. David King (CPB), CHL, and Drs. Magnus Larson and Hans Hanson, Lund University, reviewed a draft of this document. Information and...an estimate of potential error in modeled long- term scenarios. ERDC/CHL TR-12-14; Report 3 42 4.2 Determining the trajectory of a sediment

  18. Optimization of film synthesized rare earth transition metal permanent magnet systems. Progress report, August 1, 1991--July 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Cadieu, F.J.

    1992-08-01

    Progress is reported in three areas: high coercivity Sm-Fe-Ti-V, Sm-Fe-Zr, and two element Sm-Fe Sm{sub 5}(Fe,T){sub 17} type crystalline phases; ThMn{sub 12} type pseudobinary SmFe{sub 12-x}T{sub x}(0{le}{times}{le}1.5); and sputter process control for the synthesis of precisely textured rare earth-transition metal magnetic films. (DLC)

  19. Delayed ischemic gangrene change of distal limb despite optimal decompressed colostomy constructed in obstructed sigmoid colon cancer: A case report

    Institute of Scientific and Technical Information of China (English)

    Wen-Shih Huang; Kuang-Wen Liu; Paul Y Lin; Ching-Chuan Hsieh; Jeng-Yi Wang

    2006-01-01

    Creating blow-hole colostomy for decompression could provide a time-saving and efficient surgical procedure for a severely debilitated case with a completely obstructed colorectal cancer. Complications are reported as prolapse,retraction, and paracolostomal abscess. However,complication with an ischemic distal limb has not been reported. We report a case of critical intra-abdominal disease after decompressed colostomy for relieving malignant sigmoid colon obstruction; a potential fatal condition should be alerted. A 76-year-old male visited our emergency department for symptoms related to obstructed sigmoid colon tumor with foul-odor vomitus containing fecal-like materials. An emergent blow-hole colostomy proximal to an obstructed sigmoid lesion was created, and resolution of complete colon obstruction was pursued. Unfortunately, extensive abdominal painful distention with board-like abdomen and sudden onset of high fever with leukocytopenia developed subsequently.Such surgical abdomen rendered a secondarylaparotomy with resection of the sigmoid tumor along with an ischemic colon segment located proximally up to the previously created colostomy. Eventually, the patient had an uneventful postoperative hospital stay.In the present article, we have described an emergent condition of sudden onset of distal limb ischemia aftcer blow-hole colostomy and concluded that despite the decompressed colostomy would resolve acute malignant colon obstruction efficiently; impending ischemic bowel may progress with a possible irreversible peritonitis.Any patient, who undergoes a decompressed colostomy without resection of the obstructed lesion, should be monitored with leukocyte count and abdominal condition survey frequently.

  20. The fusion band in V1: a simple ECG guide to optimal resynchronization? An echocardiographic case report

    Directory of Open Access Journals (Sweden)

    Corbucci Giorgio

    2005-09-01

    Full Text Available Abstract Background Patients with left bundle branch block have a preserved right bundle branch conduction and the efficacy of left ventricular pacing could be explained with the fusion between artificial pulse delivered in the left lateral wall and the spontaneous right ventricular activation. Moreover, the efficacy of left ventricular pacing could be enhanced with an optimal timing between the spontaneous right ventricular activation and the left ventricular pulse. Case presentation We evaluated a patient (male, 47 yrs with surgically corrected mitral regurgitation, sinus rhythm and left bundle branch block, heart failure (NYHA class III despite medical therapy and low ejection fraction (25%: he was implanted with a biventricular device. We programmed ventricular pacing only through the left ventricular lead. We defined what we called electrocardiographic "fusion band" as follow: programming OFF the stimulator, we recorded the native electrocardiogram and measured, through the device, the intrinsic atrioventricular interval. Then, atrioventricular interval was progressively shortened by steps of 20 ms down to 100 ms. Twelve leads electrocardiogram was recorded at each step. The fusion band is the range of AV intervals at which surface electrocardiogram (mainly in V1 lead presents an intermediate morphology between the native left bundle branch block (upper limit of the band and the fully paced right bundle branch block (lower limit. The patient underwent echocardiographic examination at each atrioventricular interval chosen inside the fusion band. The following parameters were evaluated: ejection fraction, diastolic filling time, E wave deceleration time, aortic velocity time integral and myocardial performance index. All the echocardiographic parameters showed an improvement inside the fusion band, with a "plateau" behaviour. As the fusion band in this patient ranged from an atrioventricular delay of 200 ms to an atrioventricular delay of 120

  1. Economic evaluation and conceptual design of optimal agricultural systems for production of food and energy. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-03-01

    The major technical and economic considerations which determined the scope of the study and the structure of the linear programming (LP) models are discussed. Four models, each representing a typical crop, beef, dairy, or swine farm in conjunction with ethanol facilities are characterized by the same general behavioral and mathematical model structure. Specific activities, constraints, and data for each of the four models are presented. An overview of the model structure is provided in the context of the general scope and background assumptions, and of its LP implementation. Simulated initial conditions and outcomes are reported for typical Illinois farms. Policy implications are discussed as related to agriculture, energy, and inter-industry coordination. (MHR)

  2. Objective visual field determination in forensic ophthalmology with an optimized 4-channel multifocal VEP perimetry system: a case report of a patient with retinitis pigmentosa.

    Science.gov (United States)

    Kaltwasser, C; Horn, F K; Kremers, J; Juenemann, A; Bergua, A

    2011-10-01

    We present the case of a 59-year-old male patient with progressive vision impairment and consecutive visual field narrowing ("tunnel view") for 7 years and a known retinitis pigmentosa for 5 years. The remaining Goldmann perimetric visual field at time reported was less than 5°. A request for blindness-related social benefits was rejected because an ophthalmologic expert assessment suggested malingering. This prompted us to assess an objective determination of the visual field using multifocal VEPs. Objective visual field recordings were performed with a four-channel multifocal VEP-perimeter using 58 stimulus fields (pattern reversal dartboard stimulus configuration). The correlated signal data were processed using an off-line method. At each field, the recording from the channel with the maximal signal-to-noise ratio (SNR) was retained, thus resulting in an SNR optimized virtual recording. Analysis of VEP signals was performed for each single field and concentric rings and compared to an average response measured in five healthy subjects. Substantial VEP responses could be identified in three fields within the innermost ring (eccentricity, 1.7°) for both eyes, although SNR was generally low. More eccentric stimuli did not elicit reliable VEP responses. The mfVEP recording was correlated with perimetric visual field data. The current SNR optimization by using the channel with the largest SNR provides a good method to extract useful data from recordings and may be appropriate for the use in forensic ophthalmology.

  3. Sub-optimal adherence to combination anti-retroviral therapy and its associated factors according to self-report, clinician-recorded and pharmacy-refill assessment methods among HIV-infected adults in Addis Ababa.

    Science.gov (United States)

    Mekuria, Legese A; Prins, Jan M; Yalew, Alemayehu W; Sprangers, Mirjam A G; Nieuwkerk, Pythia T

    2017-04-01

    Adherence to combination antiretroviral therapy (cART) is generally high in most resource-limited settings. However, sub-optimal adherence occurs in a sizable proportion of patients, and is independently predictive of detectable viremia. We investigated sub-optimal adherence according to self-report, clinician-recorded, and pharmacy-refill assessment methods, and their associated factors among HIV-infected adults receiving cART in Addis Ababa, Ethiopia. Eight-hundred seventy patients who initiated cART between May 2009 and April 2012 were randomly selected, and 664 patients who were alive, had remained in clinical care and were receiving cART for at least six-months were included. Sub-optimal adherence was defined as patients' response of less than "all-of the time" to the self-report adherence question, or any clinician-recorded poor adherence during the six most recent clinic visits, or a pharmacy-refill of sub-optimal adherence. The average adherence level to cART, expressed as MPR, was nearly 97%. However, sub-optimal adherence occurred in 12%, 4%, and 27% of patients according to self-report, clinician-recorded, and pharmacy-refill measures, respectively. More satisfaction with social support was significantly associated with less sub-optimal adherence according to self-report and clinician-record. Younger age, lower educational level, and lower CD4 cell count at cART initiation were significantly associated with sub-optimal refill-based adherence. Findings from our large multi-center study suggest that sub-optimal adherence was present in up to a quarter of the patients, despite a high degree of average adherence to cART. Interventions aimed at preventing sub-optimal adherence should focus on improving social support, on younger patients, on patients with lower educational level, and on those who started cART at a lower CD4 cell count.

  4. Fundamental research of development and optimization of ceramic recuperative burners. Final report; Grundlagenuntersuchung zur Entwicklung und Optimierung keramischer Rekuperatorbrenner. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Brune, M.; Boss, M.; Flamme, M.; Lynen, A.; Wuenning, J.A.; Wuenning, J.G.; Dittmann, H.J.; Seltmann, M.

    1998-10-01

    A significant reduction of CO{sub 2} emissions from high temperature processes can be accomplished by means of heat recovery from the flue gases. For several years now, recuperative burners consisting of reaction-bonded silicon carbide have been available on the market for temperatures above 110 C and for service with corrosive flue gases, where chromium-nickel steels cannot be used. With support from the BMBF and the gas industry, the ceramic recuperative burners have been developed for highr outputs and efficiencies. The relative air preheating, the pressure drop on the air- and flue gas side, the flue gas emission and the production costs have been considered for the development and optimization of full ceramic recuperative burners. Parallel to the development of the new recuperative burners, calculations with the CFD-programm FLUENT have been carried out for the description of the heat transfer processes in the recuperator and the combustion processes. With the help of these calculations the development expenditure could be reduced. Due to the development of the production technical possibilities for RbSiC-components, it has been proven possible to produce recuperators with surface structures using the slip casting technique which on the one hand can be manufactured at a rational price level and, on the other, achieve a relative air preheating of up to {epsilon}=0.8. By the new burner concepts the NO{sub x} emission could be lowered under the limit of the German TA Luft even at highest air preheating temperatures. For the direct heating the ceramic recuperative burners comes into action, where high application temperatures, e.g. in furnace forges or ceramic kilns, or aggressive flue gases are present. For the indirect heating in heat treatment installations the ceramic recuperative burners are used in connection with full ceramic radiant tubes. (orig.) [Deutsch] Bei Hochtemperaturprozessen ist eine erhebliche Verringerung des CO{sub 2}-Ausstosses durch

  5. Hot Isostatic Press Can Optimization for Aluminum Cladding of U-10Mo Reactor Fuel Plates: FY12 Final Report and FY13 Update

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Kester D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Crapps, Justin M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scott, Jeffrey E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aikin, Beverly [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vargas, Victor D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dvornak, Matthew J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Duffield, Andrew N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Weinberg, Richard Y. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Alexander, David J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Montalvo, Joel D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hudson, Richard W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mihaila, Bogdan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Liu, Cheng [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lovato, Manuel L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dombrowski, David E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2013-08-26

    Currently, the proposed processing path for low enriched uranium – 10 wt. pct. molybdenum alloy (LEU-10Mo) monolithic fuel plates for high power research and test reactors includes hot isostatic pressing (HIP) to bond the aluminum cladding that encapsulates the fuel foil. Initial HIP experiments were performed at Idaho National Laboratory (INL) on approximately ¼ scale “mini” fuel plate samples using a HIP can design intended for these smaller experimental trials. These experiments showed that, with the addition of a co-rolled zirconium diffusion barrier on the LEU-10Mo alloy fuel foil, the HIP bonding process is a viable method for producing monolithic fuel plates. Further experimental trials at Los Alamos National Laboratory (LANL) effectively scaled-up the “mini” can design to produce full-size fuel prototypic plates. This report summarizes current efforts at LANL to produce a HIP can design that is further optimized for higher volume production runs. The production-optimized HIP can design goals were determined by LANL and Babcock & Wilcox (B&W) to include maintaining or improving the quality of the fuel plates produced with the baseline scaled-up mini can design, while minimizing material usage, improving dimensional stability, easing assembly and disassembly, eliminating machining, and significantly reducing welding. The initial small-scale experiments described in this report show that a formed-can approach can achieve the goals described above. Future work includes scaling the formed-can approach to full-size fuel plates, and current progress toward this goal is also summarized here.

  6. Optimization of processing and modeling issues for thin film solar cell devices: Final report, February 3, 1997--September 1, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Birkmire, R. W.; Phillips, J. E.; Shafarman, W. N.; Hegedus, S. S.; McCandless, B. E.

    2000-02-28

    This final report describes results achieved under a 20-month NREL subcontract to develop and understand thin-film solar cell technology associated to CuInSe{sub 2} and related alloys, a-Si and its alloys, and CdTe. Modules based on all these thin films are promising candidates to meet DOE's long-range efficiency, reliability and manufacturing cost goals. The critical issues being addressed under this program are intended to provide the science and engineering basis for the development of viable commercial processes and to improve module performance. The generic research issues addressed are: (1) quantitative analysis of processing steps to provide information for efficient commercial-scale equipment design and operation; (2) device characterization relating the device performance to materials properties and process conditions; (3) development of alloy materials with different bandgaps to allow improved device structures for stability and compatibility with module design; (4) development and improved window/heterojunction layers and contacts to improve device performance and reliability; and (5) evaluation of cell stability with respect to device structure and module encapsulation.

  7. optimal control

    Directory of Open Access Journals (Sweden)

    L. I. Rozonoer

    1999-01-01

    Full Text Available Necessary and sufficient conditions for existence of optimal control for all initial data are proved for LQ-optimization problem. If these conditions are fulfilled, necessary and sufficient conditions of optimality are formulated. Basing on the results, some general hypotheses on optimal control in terms of Pontryagin's maximum condition and Bellman's equation are proposed.

  8. TAILORING INORGANIC SORBENTS FOR SRS STRONTIUM AND ACTINIDE SEPARATIONS: OPTIMIZED MONOSODIUM TITANATEPHASE II INTERIM REPORT FOR EXTERNAL RELEASE

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, D; Michael Poirier, M; Mark Barnes, M; Mary Thompson, M

    2006-08-31

    This document provides an interim summary report of Phase II testing activities for the development of a modified monosodium titanate (MST) that exhibits improved strontium and actinide removal characteristics compared to the baseline MST materials. The activities included determining the key synthesis conditions for preparation of the modified MST, preparation of the modified MST at a larger laboratory scale, demonstration of the strontium and actinide removal characteristics with actual tank waste supernate and characterization of the modified MST. Key findings and conclusions include the following: (1) Samples of the modified MST prepared by Method 2 and Method 3 exhibited the best combination of strontium and actinide removal. (2) We selected Method 3 to scale up and test performance with actual waste solution. (3) We successfully prepared three batches of the modified MST using the Method 3 procedure at a 25-gram scale. (4) Performance tests indicated successful scale-up to the 25-gram scale with excellent performance and reproducibility among each of the three batches. For example, the plutonium decontamination factors (6-hour contact time) for the modified MST samples averaged 13 times higher than that of the baseline MST sample at half the sorbent concentration (0.2 g L{sup -1} for modified MST versus 0.4 g L{sup -1} for baseline MST). (5) Performance tests with actual waste supernate demonstrated that the modified MST exhibited better strontium and plutonium removal performance than that of the baseline MST. For example, the decontamination factors for the modified MST measured 2.6 times higher for strontium and between 5.2 to 11 times higher for plutonium compared to the baseline MST sample. The modified MST did not exhibit improved neptunium removal performance over that of the baseline MST. (6) Two strikes of the modified MST provided increased removal of strontium and actinides from actual waste compared to a single strike. The improved performance

  9. Final Report for the project titled "Enabling Supernova Computations by Integrated Transport and Provisioning Methods Optimized for Dedicated Channels"

    Energy Technology Data Exchange (ETDEWEB)

    Malathi Veeraraghavan

    2007-10-31

    Multiplexing (WDM) networks, while examples of virtual-circuit networks are MultiProtocol Label Switched (MPLS) networks and Ethernet Virtual Local Area Network (VLAN) networks. A series of new technologies have been developed to carry Ethernet VLAN tagged frames on SONET/SDH and WDM networks, such as Generic Framing Procedure (GFP) and ITU G.709, respectively. These technologies form the basis of our solution for connection-oriented internetworking. The benefit of developing such an architecture is that it allows different providers to choose different connection-oriented networking technologies for their networks, and yet be able to allow their customers to connect to those of other providers. As Metcalfe, the inventor of Ethernet, noted, the value of a network service grows exponentially with the number of endpoints to which any single endpoint can connect. Therefore internetworking solutions are key to commercial success. The technical effectiveness of our solutions was measured with proof-of-concept prototypes and experiments. These solutions were shown to be highly effective. Economic feasibility requires business case analyses that were beyond the scope of this project. The project results are beneficial to the public as they demonstrate the viability of simultaneously supporting different types of networks and data communication services much like the variety of services available for the transportation of people and goods. For example, Fedex service offers a deadline based delivery while the USPS offers basic package delivery service. Similarly, a circuit network can offer a deadline based delivery of a data file while the IP-routed network offers only basic delivery service with no guarantees. Two project Web sites, 13 publications, 7 software programs, 21 presentations resulted from this work. This report provides the complete list of publications, software programs and presentations. As for student education and training (human resources), this DOE project, along

  10. Reflood completion report: Volume 1. A phenomenological thermal-hydraulic model of hot rod bundles experiencing simultaneous bottom and top quenching and an optimization methodology for closure development

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, R.A. Jr.; Pimentel, D.A.; Jolly-Woodruff, S.; Spore, J.

    1998-04-01

    In this report, a phenomenological model of simultaneous bottom-up and top-down quenching is developed and discussed. The model was implemented in the TRAC-PF1/MOD2 computer code. Two sets of closure relationships were compared within the study, the Absolute set and the Conditional set. The Absolute set of correlations is frequently viewed as the pure set because the correlations is frequently viewed as the pure set because the correlations utilize their original coefficients as suggested by the developer. The Conditional set is a modified set of correlations with changes to the correlation coefficient only. Results for these two sets indicate quite similar results. This report also summarizes initial results of an effort to investigate nonlinear optimization techniques applied to the closure model development. Results suggest that such techniques can provide advantages for future model development work, but that extensive expertise is required to utilize such techniques (i.e., the model developer must fully understand both the physics of the process being represented and the computational techniques being employed). The computer may then be used to improve the correlation of computational results with experiments.

  11. Final Report for the project titled "Enabling Supernova Computations by Integrated Transport and Provisioning Methods Optimized for Dedicated Channels"

    Energy Technology Data Exchange (ETDEWEB)

    Malathi Veeraraghavan

    2007-10-31

    Multiplexing (WDM) networks, while examples of virtual-circuit networks are MultiProtocol Label Switched (MPLS) networks and Ethernet Virtual Local Area Network (VLAN) networks. A series of new technologies have been developed to carry Ethernet VLAN tagged frames on SONET/SDH and WDM networks, such as Generic Framing Procedure (GFP) and ITU G.709, respectively. These technologies form the basis of our solution for connection-oriented internetworking. The benefit of developing such an architecture is that it allows different providers to choose different connection-oriented networking technologies for their networks, and yet be able to allow their customers to connect to those of other providers. As Metcalfe, the inventor of Ethernet, noted, the value of a network service grows exponentially with the number of endpoints to which any single endpoint can connect. Therefore internetworking solutions are key to commercial success. The technical effectiveness of our solutions was measured with proof-of-concept prototypes and experiments. These solutions were shown to be highly effective. Economic feasibility requires business case analyses that were beyond the scope of this project. The project results are beneficial to the public as they demonstrate the viability of simultaneously supporting different types of networks and data communication services much like the variety of services available for the transportation of people and goods. For example, Fedex service offers a deadline based delivery while the USPS offers basic package delivery service. Similarly, a circuit network can offer a deadline based delivery of a data file while the IP-routed network offers only basic delivery service with no guarantees. Two project Web sites, 13 publications, 7 software programs, 21 presentations resulted from this work. This report provides the complete list of publications, software programs and presentations. As for student education and training (human resources), this DOE project, along

  12. Deterministic Global Optimization

    CERN Document Server

    Scholz, Daniel

    2012-01-01

    This monograph deals with a general class of solution approaches in deterministic global optimization, namely the geometric branch-and-bound methods which are popular algorithms, for instance, in Lipschitzian optimization, d.c. programming, and interval analysis.It also introduces a new concept for the rate of convergence and analyzes several bounding operations reported in the literature, from the theoretical as well as from the empirical point of view. Furthermore, extensions of the prototype algorithm for multicriteria global optimization problems as well as mixed combinatorial optimization

  13. Dynamic Optimization

    Science.gov (United States)

    Laird, Philip

    1992-01-01

    We distinguish static and dynamic optimization of programs: whereas static optimization modifies a program before runtime and is based only on its syntactical structure, dynamic optimization is based on the statistical properties of the input source and examples of program execution. Explanation-based generalization is a commonly used dynamic optimization method, but its effectiveness as a speedup-learning method is limited, in part because it fails to separate the learning process from the program transformation process. This paper describes a dynamic optimization technique called a learn-optimize cycle that first uses a learning element to uncover predictable patterns in the program execution and then uses an optimization algorithm to map these patterns into beneficial transformations. The technique has been used successfully for dynamic optimization of pure Prolog.

  14. Stochastic optimization

    CERN Document Server

    Schneider, Johannes J

    2007-01-01

    This book addresses stochastic optimization procedures in a broad manner. The first part offers an overview of relevant optimization philosophies; the second deals with benchmark problems in depth, by applying a selection of optimization procedures. Written primarily with scientists and students from the physical and engineering sciences in mind, this book addresses a larger community of all who wish to learn about stochastic optimization techniques and how to use them.

  15. Selective Optimization

    Science.gov (United States)

    2015-07-06

    consider a probabilistically-constrained portfolio optimization problem [16] to determine a minimum cost distribution of a unit investment among n assets...present a branching technique (Section 5). Through computational experiments on the probabilistic portfolio optimization problem (3) and an optimal ...at one. 15 DISTRIBUTION A: Distribution approved for public release. 6.2 Probabilistic Portfolio Optimization The first class of instances we test

  16. Optimal Load Dispatch Using Ant Lion Optimization

    Directory of Open Access Journals (Sweden)

    Menakshi Mahendru Nischal

    2015-08-01

    Full Text Available This paper presents Ant lion optimization (ALO technique to solve optimal load dispatch problem. Ant lion optimization (ALO is a novel nature inspired algorithm. The ALO algorithm mimics the hunting mechanism of ant lions in nature. Five main steps of hunting prey such as the random walk of ants, building traps, entrapment of ants in traps, catching preys, and re-building traps are implemented. Optimal load dispatch (OLD is a method of determining the most efficient, low-cost and reliable operation of a power system by dispatching available electricity generation resources to supply load on the system. The primary objective of OLD is to minimize total cost of generation while honoring operational constraints of available generation resources. The proposed technique is implemented on 3, 6 & 20 unit test system for solving the OLD. Numerical results shows that the proposed method has good convergence property and better in quality of solution than other algorithms reported in recent literature.

  17. Cessation of tillering in spring wheat in relation to light interception and red:far-red ratio

    NARCIS (Netherlands)

    Evers, J.B.; Vos, J.; Andrieu, B.; Struik, P.C.

    2006-01-01

    ¿ Background and Aims The production of axillary shoots (tillering) in spring wheat (Triticum aestivum) depends on intraspecific competition. The mechanisms that underlie this competition are complex, but light within the wheat canopy plays a key role. The main objectives of this paper are to

  18. Rational design of a monomeric and photostable far-red fluorescent protein for fluorescence imaging in vivo.

    Science.gov (United States)

    Yu, Dan; Dong, Zhiqiang; Gustafson, William Clay; Ruiz-González, Rubén; Signor, Luca; Marzocca, Fanny; Borel, Franck; Klassen, Matthew P; Makhijani, Kalpana; Royant, Antoine; Jan, Yuh-Nung; Weiss, William A; Guo, Su; Shu, Xiaokun

    2016-02-01

    Fluorescent proteins (FPs) are powerful tools for cell and molecular biology. Here based on structural analysis, a blue-shifted mutant of a recently engineered monomeric infrared fluorescent protein (mIFP) has been rationally designed. This variant, named iBlueberry, bears a single mutation that shifts both excitation and emission spectra by approximately 40 nm. Furthermore, iBlueberry is four times more photostable than mIFP, rendering it more advantageous for imaging protein dynamics. By tagging iBlueberry to centrin, it has been demonstrated that the fusion protein labels the centrosome in the developing zebrafish embryo. Together with GFP-labeled nucleus and tdTomato-labeled plasma membrane, time-lapse imaging to visualize the dynamics of centrosomes in radial glia neural progenitors in the intact zebrafish brain has been demonstrated. It is further shown that iBlueberry can be used together with mIFP in two-color protein labeling in living cells and in two-color tumor labeling in mice.

  19. RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Ron Moon

    2011-06-30

    This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to

  20. Nonlinear optimization

    CERN Document Server

    Ruszczynski, Andrzej

    2011-01-01

    Optimization is one of the most important areas of modern applied mathematics, with applications in fields from engineering and economics to finance, statistics, management science, and medicine. While many books have addressed its various aspects, Nonlinear Optimization is the first comprehensive treatment that will allow graduate students and researchers to understand its modern ideas, principles, and methods within a reasonable time, but without sacrificing mathematical precision. Andrzej Ruszczynski, a leading expert in the optimization of nonlinear stochastic systems, integrates t

  1. Optimal semelparity.

    Directory of Open Access Journals (Sweden)

    James W Vaupel

    Full Text Available Semelparous organisms have a simple life cycle characterized by immediate death after reproduction. We assume that semelparous life histories can be separated into a juvenile non-reproductive period followed by an adult period during which reproduction is possible. We derive formulae for the optimal age and size at reproduction and for the optimal size of the offspring (e.g., seeds. Our main contribution is to determine the conditions under which the optimal size of the offspring does not depend on the optimal size at reproduction and vice versa.

  2. Website Optimization

    CERN Document Server

    King, Andrew

    2008-01-01

    Remember when an optimized website was one that merely didn't take all day to appear? Times have changed. Today, website optimization can spell the difference between enterprise success and failure, and it takes a lot more know-how to achieve success. This book is a comprehensive guide to the tips, techniques, secrets, standards, and methods of website optimization. From increasing site traffic to maximizing leads, from revving up responsiveness to increasing navigability, from prospect retention to closing more sales, the world of 21st century website optimization is explored, exemplified a

  3. 10-MWe solar-thermal central-receiver pilot plant, solar facilities design integration: collector-field optimization report (RADL item 2-25)

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Appropriate cost and performance models and computer codes have been developed to carry out the collector field optimization, as well as additional computer codes to define the actual heliostat locations in the optimized field and to compute in detail the performance to be expected of the defined field. The range of capabilities of the available optimization and performance codes is described. The role of the optimization code in the definition of the pilot plant is specified, and a complete description of the optimization process itself is given. The detailed cost model used by the optimizer for the commercial system optimization is presented in the form of equations relating the cost element to each of the factors that determine it. The design basis for the commercial system is presented together with the rationale for its selection. The development of the individual heliostat performance code is presented. Use of the individual heliostat code in a completed study of receiver panel power under sunrise startup conditions is described. The procedure whereby performance and heliostat spacing data from the representative commercial-scale system are converted into coefficients of use in the layout processor is described, and the actual procedure used in the layout processor is described. Numerous special studies in support of the pilot plant design are described. (LEW)

  4. NERI FINAL TECHNICAL REPORT, DE-FC07-O5ID14647, OPTIMIZATION OF OXIDE COMPOUNDS FOR ADVANCED INERT MATRIX MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    PI: JUAN C. NINO, ASSOCIATE PROFESSOR

    2009-01-11

    In order to reduce the current excesses of plutonium (both weapon grade and reactor grade) and other transuranium elements, a concept of inert matrix fuel (IMF) has been proposed for an uranium free transmutation of fissile actinides which excludes continuous uranium-plutonium conversion in thermal reactors and advanced systems. Magnesium oxide (MgO) is a promising candidate for inert matrix (IM) materials due to its high melting point (2827 C), high thermal conductivity (13 W/K {center_dot} m at 1000 C), good neutronic properties, and irradiation stability However, MgO reacts with water and hydrates easily, which prevents it from being used in light water reactors (LWRs) as an IM. To improve the hydration resistance of MgO-based inert matrix materials, Medvedev and coworkers have recently investigated the introduction of a secondary phase that acts as a hydration barrier. An MgO-ZrO{sub 2} composite was specifically studied and the results showed that the composite exhibited improved hydration resistance than pure MgO. However, ZrO{sub 2} is insoluble in most acids except HF, which is undesirable for fuel reprocessing. Moreover, the thermal conductivity of ZrO{sub 2} is low and typically less than 3 W {center_dot} m{sup -1} {center_dot} K{sup -1} at 1000 C. In search for an alternative composite strategy, Nd{sub 2}Zr{sub 2}O{sub 7}, an oxide compound with pyrochlore structure, has been proposed recently as a corrosion resistant phase, and MgO-Nd{sub 2}Zr{sub 2}O{sub 7} composites have been investigated as potential IM materials. An adequate thermal conductivity of 6 W {center_dot} m{sup -} 1 {center_dot} K{sup -1} at 1000 C for the MgO-Nd{sub 2}Zr{sub 2}O{sub 7} composite with 90 vol% MgO was recently calculated and reported. Other simulations proposed that the MgO-pyrochlore composites could exhibit higher radiation stability than previously reported. Final optimization of the composite microstructure was performed on the 70 vol% MgO-Nd{sub 2}Zr{sub 2}O{sub 7

  5. 大型企业报表引擎的优化设计与实现%Optimization Design and Implementation of Large Enterprise Reporting Engine

    Institute of Scientific and Technical Information of China (English)

    何拥军; 曾文权

    2013-01-01

    The report is the important constituent of enterprise level application system,excellent reports on basic data filtering,merging, statistics,analysis,provides an intuitive form of expression,and provides a good basis for decision-making. At present,large enterprises based on B/S reporting system development pattern is relatively immature,developers are mostly based on actual demand to write code directly to realize the data analysis,processing,display function,such implementations will do a lot of repetitive work,for example,many projects need to pass the report data and charts to show business trends,as demonstrated in the time granularity,granularity,geographical latitude and index data are different,the results are different. Project of similar function requires repeated development,summed up is reus-ability is low,poor scalability and maintainability,the high cost of development. In order to solve the problem above,present the business needs for a high level of abstraction,realizing a optimized reporting engine of unified analysis data,processing data,displaying informa-tion,the report engine focused on the business logic to achieve,and the specific business separation,can help developers quickly build a stable report application system. Based on the report engine,the report system has been applied in a provincial telecom operators,from the actual operation situation,the system operation is stable,and exhibit good scalability,after the test of many concurrent users query,large amount of data query,show the good performance.%报表是企业级应用系统的重要组成部分,优秀的报表可以对基础数据进行过滤、合并、统计、分析,提供直观的表达形式,并为决策提供良好的依据。目前大型企业基于B/S的报表系统开发模式相对不成熟,开发人员大都是根据实际需求直接写代码实现数据的分析、处理、展现功能,这样的实现方式会做很多重复工作,比如很多项目中都

  6. Medicinsk Optimering

    DEFF Research Database (Denmark)

    Birkholm, Klavs

    2010-01-01

    En undersøgelse af anvendelsen af medicin til optimering af koncentration, hukommelse og følelsestonus. Efterfulgt af etiske overvejelser og anbefalinger til det politiske system......En undersøgelse af anvendelsen af medicin til optimering af koncentration, hukommelse og følelsestonus. Efterfulgt af etiske overvejelser og anbefalinger til det politiske system...

  7. Topology Optimization

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt; Damkilde, Lars

    2007-01-01

    . A way to solve the initial design problem namely finding a form can be solved by so-called topology optimization. The idea is to define a design region and an amount of material. The loads and supports are also fidefined, and the algorithm finds the optimal material distribution. The objective function...... dictates the form, and the designer can choose e.g. maximum stiness, maximum allowable stresses or maximum lowest eigenfrequency. The result of the topology optimization is a relatively coarse map of material layout. This design can be transferred to a CAD system and given the necessary geometrically...... refinements, and then remeshed and reanalysed in other to secure that the design requirements are met correctly. The output of standard topology optimization has seldom well-defined, sharp contours leaving the designer with a tedious interpretation, which often results in less optimal structures. In the paper...

  8. Dispositional Optimism

    Science.gov (United States)

    Carver, Charles S.; Scheier, Michael F.

    2014-01-01

    Optimism is a cognitive construct (expectancies regarding future outcomes) that also relates to motivation: optimistic people exert effort, whereas pessimistic people disengage from effort. Study of optimism began largely in health contexts, finding positive associations between optimism and markers of better psychological and physical health. Physical health effects likely occur through differences in both health-promoting behaviors and physiological concomitants of coping. Recently, the scientific study of optimism has extended to the realm of social relations: new evidence indicates that optimists have better social connections, partly because they work harder at them. In this review, we examine the myriad ways this trait can benefit an individual, and our current understanding of the biological basis of optimism. PMID:24630971

  9. Presence of elevated non-HDL among patients with T2DM with CV events despite of optimal LDL-C - A report from South India.

    Science.gov (United States)

    Kumpatla, Satyavani; Soni, Anju; Narasingan, S N; Viswanathan, Vijay

    2016-01-01

    Elevated non-high density lipoprotein cholesterol (non-HDL-C) was the commonest lipid abnormality among T2DM patients with cardiovascular events (CV) events. Prevalence of elevated non-HDL-C was 21.6% among patients who were on statin therapy and with optimal low density lipoprotein-cholesterol (LDL-C) levels. Despite an optimal LDL-C level, 47% of the T2DM patients with CV events had elevated non-HDL-C.

  10. Optimizing the function of upstanding activities in adult patients with acquired lesions of the central nervous system by using the Bobath concept approach - A case report.

    Science.gov (United States)

    Jelica, Stjepan; Seper, Vesna; Davidović, Erna; Bujisić, Gordana

    2011-01-01

    Nonspecific medical gymnastic therapy may help patients after stroke achieve certain results in terms of efficiency but not in terms of quality of movement. The goal of treatment by Bobath concept is development of movement (effectiveness) and optimization of movement (efficiency). This article presents the case of a 62-year old patient who had experienced a stroke and has difficulties with standing up activities. It underscores the importance of not only recovery of function but also optimization of the function in such patients.

  11. Optimization Algorithms for Fully Automatic Optimizing Cross-cut Saw

    Institute of Scientific and Technical Information of China (English)

    LI Xiaochun; DING Qingxin; ZHAO Honglin; SUN Guangbin; XI Jiaxing

    2010-01-01

    The optimization of boards by grades plays an important role in the production for cross cutting boards, and the outturn rate and utilization of boards are directly affected by the optimization results of boards by grades. At present, the OptiCut series fully automatic optimizing cross-cut saw(FAOCCS) from Germany Weinig Group occupies the main markets in the world, but no report about the relative theories on the optimization technology and its algorithms is available. There exist some disadvantages in woodworking machinery and equipment used for cross cutting boards in China, for example, low sawing precision, outturn rate of boards and productivity, and difficulty in making statistics on the sawing results. Three optimization modes are presented for the optimization algorithms for FAOCCS, namely, optimization of fixed length, optimization of finger-jointed lumber and mixed optimization. Mathematical models are then established for these three optimization modes, and the corresponding software for realizing the optimization is prepared. Finally, Synthetic evaluation on the established mathematical models is presented through three practical examples. The results of synthetic evaluation indicate that FAOCCS using the optimization modes may raise the outturn rate of boards approximately 8% and the productivity obviously, and allows accurate statistics on the cross cut products of boards. The mathematical models of above three optimization modes are useful for increasing the outturn rate and utilization ratio of boards.

  12. Report

    Directory of Open Access Journals (Sweden)

    Akin Aydogan

    2012-01-01

    Full Text Available Introduction. Gossypiboma (GP is a term used to express the mass resulting from forgotten cotton sponge in operations. Rarely, a transmural migration may occur into the gastrointestinal lumen without creating any defect by GP. Laparotomy or endoscopic removal may be required, by the way it can be taken out of the body itself by intestinal ways. In this study, we reported a case of mechanical intestinal obstruction causing GP. Case. The fifty-one-year-old female patient admitted to the emergency department with the complaints of mechanical intestinal obstruction and had a history of open cholecystectomy 20 years ago. There were the findings of intestinal obstruction in abdominal plain radiography and computerized tomography. The sponge that obstructed the lumen completely 40 cm proximal to the ileocecal valve was identified in the laparotomy with the diagnosis of brid ileus. The small intestine was closed over double-fold after removal of sponge. Transmural migration of abdominal-remained sponge was thought to be occurred without creating a defect after cholecystectomy. Postoperatively, the patient was discharged without having any problems at 4th day of hospitalization. Conclusion. Although it is a rare situation in routine clinical practice, GP should be considered as a differential diagnosis in the patients who had a diagnosis of mechanical intestinal obstruction, and laparotomy was applied before. As GP may lead to situations which cause mortality, all precautions should be taken to prevent it.

  13. Advanced in-duct sorbent injection for SO{sub 2} control. Topical report No. 2, Subtask 2.2: Design optimization

    Energy Technology Data Exchange (ETDEWEB)

    Rosenhoover, W.A.; Stouffer, M.R.; Withum, J.A.

    1994-12-01

    The objective of this research project is to develop second-generation duct injection technology as a cost-effective SO{sub 2} control option for the 1990 Clean Air Act Amendments. Research is focused on the Advanced Coolside process, which has shown the potential for achieving the performance targets of 90% SO{sub 2} removal and 60% sorbent utilization. In Subtask 2.2, Design Optimization, process improvement was sought by optimizing sorbent recycle and by optimizing process equipment for reduced cost. The pilot plant recycle testing showed that 90% SO{sub 2} removal could be achieved at sorbent utilizations up to 75%. This testing also showed that the Advanced Coolside process has the potential to achieve very high removal efficiency (90 to greater than 99%). Two alternative contactor designs were developed, tested and optimized through pilot plant testing; the improved designs will reduce process costs significantly, while maintaining operability and performance essential to the process. Also, sorbent recycle handling equipment was optimized to reduce cost.

  14. Optimal shapes for self-propelled swimmers

    Science.gov (United States)

    Koumoutsakos, Petros; van Rees, Wim; Gazzola, Mattia

    2011-11-01

    We optimize swimming shapes of three-dimensional self-propelled swimmers by combining the CMA- Evolution Strategy with a remeshed vortex method. We analyze the robustness of optimal shapes and discuss the near wake vortex dynamics for optimal speed and efficiency at Re=550. We also report preliminary results of optimal shapes and arrangements for multiple coordinated swimmers.

  15. Portfolio Optimization

    OpenAIRE

    Frajtova-Michalikova, Katarina; Spuchľakova, Erika; Misankova, Maria

    2015-01-01

    In this paper Portfolio Optimization techniques were used to determine the most favorable investment portfolio. In particular, stock indices of three companies, namely Microsoft Corporation, Christian Dior Fashion House and Shevron Corporation were evaluated. Using this data the amounts invested in each asset when a portfolio is chosen on the efficient frontier were calculated. In addition, the Portfolio with minimum variance, tangency portfolio and optimal Markowitz portfolio are presented.

  16. Formula optimization of the Jiashitang scar removal ointment and antiinflammatory compounds screening by NF-κB bioactivity-guided dual-luciferase reporter assay system.

    Science.gov (United States)

    Gao, Jie; Tao, Jin; Zhang, Nannan; Liu, Yanjie; Jiang, Min; Hou, Yuanyuan; Wang, Qian; Bai, Gang

    2015-02-01

    Inflammation plays a role in scar formation; therefore, decreasing inflammation benefits scar removal. Jiashitang scar removal ointment (JST) is a commercially available traditional Chinese medicinal formulation. It is composed of extracts from Carthamus tinctorius L. (Car), Rheum officinale Baill. (Rhe), Salvia miltiorrhiza Beg. (Sal), and Panax notoginseng (Burk.) F. H. Chen (Pan), which are all herbs with potent antiinflammatory activities. Our aims are to optimize the formula of JST and to elucidate its antiinflammatory active components. Response surface methodology was applied to optimize proportions of the four herb extracts. The antiinflammatory effects were evaluated using in vitro and in vivo models. To screen for active components in this formula, a bioactivity-based ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry analysis was performed. After optimization, the antiinflammatory effects of the new formula were significantly superior to the original one. Screening identified 13 active ingredients: a series of saffiomin, emodin, salvianolic acid, tanshinone, and triterpenoid saponin derivatives. These active ingredients were predicted to exert nuclear factor-κB inhibiting effects through MAPK, PI3K/AKT, and NIK-IKK pathways. In conclusion, the original formula was successfully optimized with more potent antiinflammatory activity. These methods can be applied to researches of other formulas.

  17. Unconstrained Optimization

    DEFF Research Database (Denmark)

    Frandsen, P. E.; Jonasson, K.; Nielsen, Hans Bruun

    1999-01-01

    This lecture note is intended for use in the course 04212 Optimization and Data Fitting at the Technincal University of Denmark. It covers about 25% of the curriculum. Hopefully, the note may be useful also to interested persons not participating in that course. The aim of the note is to give...... an introduction to algorithms for unconstrained optimization. We present Conjugate Gradient, Damped Newton and Quasi Newton methods together with the relevant theoretical background. The reader is assumed to be familiar with algorithms for solving linear and nonlinear system of equations, at a level corresponding...

  18. Unconstrained Optimization

    DEFF Research Database (Denmark)

    Frandsen, P. E.; Jonasson, K.; Nielsen, Hans Bruun

    1999-01-01

    This lecture note is intended for use in the course 04212 Optimization and Data Fitting at the Technincal University of Denmark. It covers about 25% of the curriculum. Hopefully, the note may be useful also to interested persons not participating in that course. The aim of the note is to give...... an introduction to algorithms for unconstrained optimization. We present Conjugate Gradient, Damped Newton and Quasi Newton methods together with the relevant theoretical background. The reader is assumed to be familiar with algorithms for solving linear and nonlinear system of equations, at a level corresponding...

  19. Application of integrated reservoir management and reservoir characterization to optimize infill drilling. Annual technical progress report, June 13, 1996--June 12, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Nevans, J.W.; Pregger, B. [Fina Oil and Chemical Co., Midland, TX (United States); Blasingame, T.; Doublet, L. [Texas A and M Univ., College Station, TX (United States); Freeman, G.; Callard, J. [Univ. of Tulsa, OK (United States); Moore, D. [Scientific Software, Inc. (United States); Davies, D.; Vessell, R. [David K. Davies and Associates (United States)

    1997-08-01

    Infill drilling of wells on a uniform spacing, without regard to reservoir performance and characterization, does not optimize reservoir development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. New and emerging technologies, such as geostatistical modeling, rigorous decline curve analysis, reservoir rock typing, and special core analysis can be used to develop a 3-D simulation model for prediction of infill locations. The purpose of this project is to demonstrate the application of advanced secondary recovery technologies to remedy producibility problems in typical shallow shelf carbonate reservoirs of the Permian Basin, Texas. Typical problems include poor sweep efficiency, poor balancing of injection and production rates, and completion techniques that are inadequate for optimal production and injection.

  20. Portfolio-Scale Optimization of Customer Energy Efficiency Incentive and Marketing: Cooperative Research and Development Final Report, CRADA Number CRD-13-535

    Energy Technology Data Exchange (ETDEWEB)

    Brackney, Larry J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-17

    North East utility National Grid (NGrid) is developing a portfolio-scale application of OpenStudio designed to optimize incentive and marketing expenditures for their energy efficiency (EE) programs. NGrid wishes to leverage a combination of geographic information systems (GIS), public records, customer data, and content from the Building Component Library (BCL) to form a JavaScript Object Notation (JSON) input file that is consumed by an OpenStudio-based expert system for automated model generation. A baseline model for each customer building will be automatically tuned using electricity and gas consumption data, and a set of energy conservation measures (ECMs) associated with each NGrid incentive program will be applied to the model. The simulated energy performance and return on investment (ROI) will be compared with customer hurdle rates and available incentives to A) optimize the incentive required to overcome the customer hurdle rate and B) determine if marketing activity associated with the specific ECM is warranted for that particular customer. Repeated across their portfolio, this process will enable NGrid to substantially optimize their marketing and incentive expenditures, targeting those customers that will likely adopt and benefit from specific EE programs.

  1. Optimal transport

    CERN Document Server

    Eckmann, B

    2008-01-01

    At the close of the 1980s, the independent contributions of Yann Brenier, Mike Cullen and John Mather launched a revolution in the venerable field of optimal transport founded by G Monge in the 18th century, which has made breathtaking forays into various other domains of mathematics ever since. The author presents a broad overview of this area.

  2. Topology optimization

    DEFF Research Database (Denmark)

    Bendsøe, Martin P.; Sigmund, Ole

    2007-01-01

    Taking as a starting point a design case for a compliant mechanism (a force inverter), the fundamental elements of topology optimization are described. The basis for the developments is a FEM format for this design problem and emphasis is given to the parameterization of design as a raster image...

  3. Development of a Rhodobacter capsulatus self-reporting model system for optimizing light-dependent, [FeFe]-hydrogenase-driven H 2 production: A Model System for Optimizing H 2 Production

    Energy Technology Data Exchange (ETDEWEB)

    Wecker, Matt S. A. [GeneBiologics, LLC, Boulder Colorado; Beaton, Stephen E. [United States Air Force Academy, Department of Chemistry, Colorado Springs Colorado; Chado, Robert A. [United States Air Force Academy, Department of Chemistry, Colorado Springs Colorado; Ghirardi, Maria L. [National Renewable Energy Laboratory, MS 3313, 15013 Denver West Parkway Golden Colorado 80401

    2016-08-23

    The photosynthetic bacterium Rhodobacter capsulatus normally photoproduces H2 as a by-product of its nitrogenase-catalyzed nitrogen-fixing activity. Such H2 production, however, is expensive from a metabolic perspective, requiring nearly four times as many photons as the equivalent algal hydrogenase-based system (Ghirardi et al. 2009). Here we report the insertion of a Clostridium acetobutylicum [FeFe]-hydrogenase and its three attendant hydrogenase assembly proteins into an R. capsulatus strain lacking its native uptake hydrogenase. Further, this strain is modified to fluoresce upon sensing H2. The resulting strain photoproduces H2 and self-reports its own H2 production through fluorescence. This model system represents a unique method of developing hydrogenase-based H2 production in R. capsulatus, may serve as a powerful system for in vivo directed evolution of hydrogenases and hydrogenase-associated genes, and provides a means of screening for increased metabolic production of H2.

  4. Optimal control

    CERN Document Server

    Aschepkov, Leonid T; Kim, Taekyun; Agarwal, Ravi P

    2016-01-01

    This book is based on lectures from a one-year course at the Far Eastern Federal University (Vladivostok, Russia) as well as on workshops on optimal control offered to students at various mathematical departments at the university level. The main themes of the theory of linear and nonlinear systems are considered, including the basic problem of establishing the necessary and sufficient conditions of optimal processes. In the first part of the course, the theory of linear control systems is constructed on the basis of the separation theorem and the concept of a reachability set. The authors prove the closure of a reachability set in the class of piecewise continuous controls, and the problems of controllability, observability, identification, performance and terminal control are also considered. The second part of the course is devoted to nonlinear control systems. Using the method of variations and the Lagrange multipliers rule of nonlinear problems, the authors prove the Pontryagin maximum principle for prob...

  5. Distributed optimality

    OpenAIRE

    Trommer, Jochen

    2005-01-01

    In dieser Dissertation schlage ich eine Synthese (Distributed Optimality, DO) von Optimalitätstheorie und einem derivationellen, morphologischem Asatz, Distributed Morphology (DM; Halle & Marantz, 1993) vor. Durch die Integration von OT in DM wird es möglich, Phänomene, die in DM durch sprachspezifische Regeln oder Merkmale von lexikalischen Einträge erfasst werden, auf die Interaktion von verletzbaren, universellen Constraints zurückzuführen. Andererseits leistet auch DM zwei substantielle B...

  6. Optimal learning

    CERN Document Server

    Powell, Warren B

    2012-01-01

    Learn the science of collecting information to make effective decisions Everyday decisions are made without the benefit of accurate information. Optimal Learning develops the needed principles for gathering information to make decisions, especially when collecting information is time-consuming and expensive. Designed for readers with an elementary background in probability and statistics, the book presents effective and practical policies illustrated in a wide range of applications, from energy, homeland security, and transportation to engineering, health, and business. This book covers the

  7. Optimization Problems

    Directory of Open Access Journals (Sweden)

    Yaping Hu

    2015-01-01

    the nonsmooth convex optimization problem. First, by using Moreau-Yosida regularization, we convert the original objective function to a continuously differentiable function; then we use approximate function and gradient values of the Moreau-Yosida regularization to substitute the corresponding exact values in the algorithm. The global convergence is proved under suitable assumptions. Numerical experiments are presented to show the effectiveness of this algorithm.

  8. Report: Optimization study of the preparation factors for argan oil microcapsule based on hybrid-level orthogonal array design via SPSS modeling.

    Science.gov (United States)

    Zhao, Xi; Wu, Xiaoli; Zhou, Hui; Jiang, Tao; Chen, Chun; Liu, Mingshi; Jin, Yuanbao; Yang, Dongsheng

    2014-11-01

    To optimize the preparation factors for argan oil microcapsule using complex coacervation of chitosan cross-linked with gelatin based on hybrid-level orthogonal array design via SPSS modeling. Eight relatively significant factors were firstly investigated and selected as calculative factors for the orthogonal array design from the total of ten factors effecting the preparation of argan oil microcapsule by utilizing the single factor variable method. The modeling of hybrid-level orthogonal array design was built in these eight factors with the relevant levels (9, 9, 9, 9, 7, 6, 2 and 2 respectively). The preparation factors for argan oil microcapsule were investigated and optimized according to the results of hybrid-level orthogonal array design. The priorities order and relevant optimum levels of preparation factors standard to base on the percentage of microcapsule with the diameter of 30~40 μm via SPSS. Experimental data showed that the optimum factors were controlling the chitosan/gelatin ratio, the systemic concentration and the core/shell ratio at 1:2, 1.5% and 1:7 respectively, presetting complex coacervation pH at 6.4, setting cross-linking time and complex coacervation at 75 min and 30 min, using the glucose-delta lactone as the type of cross-linking agent, and selecting chitosan with the molecular weight of 2000~3000.

  9. Optimization of three-dimensional imaging on in vitro produced porcine blastocysts and chimeras for stem cell testing: A technology report

    DEFF Research Database (Denmark)

    Secher, Jan; Freude, Karla; Li, Rong

    2015-01-01

    Differential staining is an immunocytochemical staining that visualizes trophectoderm (TE) and the inner cell mass (ICM) of the blastocysts. It is used to determine the blastocyst quality, but could also be a useful tool to assess the integration site of injected cells into the early embryo....... This is relevant for testing of presumed pluripotent stem cells. The gold standard for pluripotent stem cells is to test if the cells are capable of contributing to germline chimeras. Differential staining can be used to evaluate the possibility of chimeric contribution; if the cells are located in the area...... of the ICM they are likely to contribute to the fetus and if they are located in the area of the TE they are likely to contribute to the fetal membranes. In this article, we optimize on methods for embryo staining and mounting so that the exact location of injected stem cells within preimplantation porcine...

  10. Application of Integrated Reservoir Management and Reservoir Characterization to Optimize Infill Drillings. Annual technical progress report, June 13, 1996 to June 12, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Nevans, Jerry W.; Blasingame, Tom; Doublet, Louis; Kelkar, Mohan; Freeman, George; Callard, Jeff; Moore, David; Davies, David; Vessell, Richard; Pregger, Brian; Dixon, Bill

    1999-04-27

    Infill drilling of wells on a uniform spacing, without regard to reservoir performance and characterization, does not optimize reservoir development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. New and emerging technologies, such as geostatistical modeling, rigorous decline curve analysis, reservoir rock typing, and special core analysis can be used to develop a 3-D simulation model for prediction of infill locations. Other technologies, such as inter-well injection tracers and magnetic flow conditioners, can also aid in the efficient evaluation and operation of both injection and producing wells. The purpose of this project was to demonstrate useful and cost effective methods of exploitation of the shallow shelf carbonate reservoirs of the Permian Basin located in West Texas.

  11. Optimization of Phase-Engineered a-Si:H-Based Multi-Junction Solar Cells: Final Technical Report, October 2001-July 2005

    Energy Technology Data Exchange (ETDEWEB)

    Wronski, C. R.; Collins, R. W.; Podraza, N. J.; Vlahos, V.; Pearce, J. M.; Deng, J.; Albert, M.; Ferreira, G. M.; Chen, C.

    2006-08-01

    The scope of the work under this subcontract has involved investigating engineered improvements in the performance and stability of solar cells in a systematic way, which included the following four tasks: (1) Materials research and device development; (2) Process improvement directed by real time diagnostics; (3) Device loss mechanisms; and (4) Characterization strategies for advanced materials Our work has resulted in new and important insights into the deposition of a-Si:H-based materials, as well as into the nature of the Staebler-Wronski Effect (SWE). Presumably, many of these insights will be used by industrial partners to develop more systematic approaches in optimizing solar cells for higher performance and stability. This effort also cleared up several serious misconceptions about the nature of the p-layer in cells and the SWE in materials and cells. Finally, the subcontract identified future directions that should be pursued for greater understanding and improvement.

  12. Technical and economical optimization of wood gasification in a circulating fluidized bed. Final report; Technische und wirtschaftliche Optimierung der Vergasung von Holz in der zirkulierenden Wirbelschicht. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Ising, M.; Unger, C.; Heunemann, F.; Dinkelbach, L.

    2002-12-01

    The project's objective was the optimization of a novel process for high efficient combined heat and power production from solid biomass. The processed air blown wood gasification in a pilot scale circulating fluidized bed was added by a catalytic tar reformer which would yield a tar-free gas quality suitable for IC-engine operation. Major efforts were taken for technical improvement of the tar reformer, especially concerning temperature control and cleaning devices which is important for keeping constantly a high activity. Pure natural timber did not yield chemical deactivation at the catalyst whereas the gasification of waste wood yielded decreasing activity which could be partly reversed by special measures taken. Further optimization of the process considered a better automation and improvement of the engine's flue gas emissions. Also a detailed economic consideration and evaluation of the entire process has been carried out. As a result the novel process should have economic advantages compared with conventional technology. (orig.) [German] Gegenstand des Vorhabens war die Weiterentwicklung eines Verfahrens zur effizienteren Strom- und Waermegewinnung aus festen Biobrennstoffen. Durch luftgeblasene Vergasung von Holz im Pilotmassstab in einer zirkulierenden Wirbelschicht und anschliessender katalytischer Teerspaltung konnte ein niederkalorisches Brenngas erzeugt werden, welches zum Betrieb eines Motoren-Blockheizkraftwerks geeignet war. Im Rahmen der Verfahrensoptimierung wurde der katalytische Teer-Reformer, insbesondere in Bezug auf Temperaturfuehrung und die zum Aktivitaetserhalt wichtige Abreinigungsvorrichtung, verbessert. Bei der Vergasung von Naturholz wurde keine chemische Desaktivierung festgestellt. Beim Altholzeinsatz wurde ein ueberwiegend reversibler Aktivitaetsverlust verzeichnet und begruendet. Geeignete Gegenmassnahmen wurden untersucht und beschrieben. Weitere Optimierungen betrafen die Anlagensteuerungstechnik im Hinblick auf die

  13. THE MARKETING MIX OPTIMIZATION

    OpenAIRE

    SABOU FELICIA

    2014-01-01

    The paper presents the marketing mix and the necessity of the marketing mix optimization. In the marketing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to opti...

  14. A systematic survey of the methods literature on the reporting quality and optimal methods of handling participants with missing outcome data for continuous outcomes in randomized controlled trials.

    Science.gov (United States)

    Zhang, Yuqing; Alyass, Akram; Vanniyasingam, Thuva; Sadeghirad, Behnam; Flórez, Iván D; Pichika, Sathish Chandra; Kennedy, Sean Alexander; Abdulkarimova, Ulviya; Zhang, Yuan; Iljon, Tzvia; Morgano, Gian Paolo; Colunga Lozano, Luis E; Aloweni, Fazila Abu Bakar; Lopes, Luciane C; Yepes-Nuñez, Juan José; Fei, Yutong; Wang, Li; Kahale, Lara A; Meyre, David; Akl, Elie A; Thabane, Lehana; Guyatt, Gordon H

    2017-08-01

    To conduct (1) a systematic survey of the reporting quality of simulation studies dealing with how to handle missing participant data (MPD) in randomized control trials and (2) summarize the findings of these studies. We included simulation studies comparing statistical methods dealing with continuous MPD in randomized controlled trials addressing bias, precision, coverage, accuracy, power, type-I error, and overall ranking. For the reporting of simulation studies, we adapted previously developed criteria for reporting quality and applied them to eligible studies. Of 16,446 identified citations, the 60 eligible generally had important limitations in reporting, particularly in reporting simulation procedures. Of the 60 studies, 47 addressed ignorable and 32 addressed nonignorable data. For ignorable missing data, mixed model was most frequently the best on overall ranking (9 times best, 34.6% of times tested) and bias (10, 55.6%). Multiple imputation was also performed well. For nonignorable data, mixed model was most frequently the best on overall ranking (7, 46.7%) and bias (8, 57.1%). Mixed model performance varied on other criteria. Last observation carried forward (LOCF) was very seldom the best performing, and for nonignorable MPD frequently the worst. Simulation studies addressing methods to deal with MPD suffered from serious limitations. The mixed model approach was superior to other methods in terms of overall performance and bias. LOCF performed worst. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Discrete optimization

    CERN Document Server

    Parker, R Gary

    1988-01-01

    This book treats the fundamental issues and algorithmic strategies emerging as the core of the discipline of discrete optimization in a comprehensive and rigorous fashion. Following an introductory chapter on computational complexity, the basic algorithmic results for the two major models of polynomial algorithms are introduced--models using matroids and linear programming. Further chapters treat the major non-polynomial algorithms: branch-and-bound and cutting planes. The text concludes with a chapter on heuristic algorithms.Several appendixes are included which review the fundamental ideas o

  16. Combinatorial Optimization

    CERN Document Server

    Chvátal, V

    2011-01-01

    This book is a collection of six articles arising from the meeting of the NATO Advanced Study Institute (ASI) "Combinatorial Optimization: Methods and Applications," which was held at the University of Montreal in June 2006. This ASI consisted of seven series of five one-hour lectures and one series of four one-hour lectures. It was attended by some sixty students of graduate or postdoctoral level from fifteen countries worldwide. It includes topics such as: integer and mixed integer programming, facility location, branching on split disjunctions, convexity in combinatorial optimizat

  17. Aircraft Trajectory Optimization Using Parametric Optimization Theory

    OpenAIRE

    Valenzuela Romero, Alfonso

    2012-01-01

    In this thesis, a study of the optimization of aircraft trajectories using parametric optimization theory is presented. To that end, an approach based on the use of predefined trajectory patterns and parametric optimization is proposed. The trajectory pat

  18. Discovery, adaptation and transcriptional activity of two tick promoters: Construction of a dual luciferase reporter system for optimization of RNA interference in Rhipicephalus (Boophilus) microplus cell lines

    Science.gov (United States)

    Dual luciferase reporter systems are valuable tools for functional genomic studies, but have not previously been developed for use in tick cell culture. We evaluated expression of available luciferase constructs in tick cell cultures derived from Rhipicephalus (Boophilus) microplus, an important vec...

  19. Optimization of laser scribing for thin-film PV modules. Annual technical progress report, 12 April 1995--11 April 1996

    Energy Technology Data Exchange (ETDEWEB)

    Compaan, A.D.; Jayamaha, U.; Matulionis, I.; Miller, M.J. [Univ. of Toledo, OH (United States)

    1996-10-01

    One of the most important aspects in moving from the cell level to the integrated module level in thin-film photovoltaics is to achieve reliable and reproducible cell interconnects having low series resistance and high shunt resistance, and to do this with a minimum of dead area between cells. It is known that mechanical scribing often produces considerable damage (e.g., film tearing) surrounding the scribe. Laser scribing has shown the potential for superior scribe widths and profiles for many of the materials involved with thin-film PV. However, problems arc also known to occur with a heat-affected zone around the scribe, and for some materials and some focus conditions high positive ridges or collars are left along the scribe line. The commercially-available scribing systems have been optimized typically for other applications and other materials such as scribing of crystalline Si. Optimum operation for thin-film PV materials has been investigated by several PV manufacturers but there has been limited discussion of problems or of optimum parameters in the open literature. Furthermore, to our knowledge, there has been little investigation of the applicability, for thin-film PV, of laser systems other than the traditional cw lamp-pumped, Q-switched Nd:YAG.

  20. Optimal randomized scheduling by replacement

    Energy Technology Data Exchange (ETDEWEB)

    Saias, I.

    1996-05-01

    In the replacement scheduling problem, a system is composed of n processors drawn from a pool of p. The processors can become faulty while in operation and faulty processors never recover. A report is issued whenever a fault occurs. This report states only the existence of a fault but does not indicate its location. Based on this report, the scheduler can reconfigure the system and choose another set of n processors. The system operates satisfactorily as long as, upon report of a fault, the scheduler chooses n non-faulty processors. We provide a randomized protocol maximizing the expected number of faults the system can sustain before the occurrence of a crash. The optimality of the protocol is established by considering a closely related dual optimization problem. The game-theoretic technical difficulties that we solve in this paper are very general and encountered whenever proving the optimality of a randomized algorithm in parallel and distributed computation.

  1. Optimal produktion

    Directory of Open Access Journals (Sweden)

    Öje Danell

    1999-04-01

    Full Text Available Optimal Production in Reindeer Husbandry.There are three ways to optimize the reindeer herd: 1 Adjusting the reindeer number to pasture resources. 2 Keeping as many productive animals in the herd as possible through slaughter. 3 Increasing the herd quality through selection.Renhjorden bör optimeras så att den fungerar som en "skördeapparat" for bete och lämnar största möjliga bidrag till försörjningen för dem som lever av renskötsel. Det finns minst tre sätt att optimera renhjorden, nämligen (1 anpassning av djurantalet till betesresurserna så att djurens kondition och därmed produktiviteten kan bibehållas på hög nivå, (2 utforma renhjordens struktur med hjalp av slaktuttaget så att den innehåller så stor andel produktiva djur som möjligt, och (3 förbättra djurmaterialets produktionsmässiga kvalitet genom urval baserat på registrerad produktion. Betesanpassningen är den mest grundläggande åtgärden och ger den snabbaste effekten. Även hjordstrukturering är en åtgärd som ger relativt snabb effekt och som dessutom kan beslutas och utforas av den enskilde djuraägaren utan att störa den kollektiva renskötseln. Urval är en åtgärd som ger effekt först på längre sikt och därför kräver en konsekvent insats under en längre tid.

  2. An improved group search optimizer for mechanical design optimization problems

    Institute of Scientific and Technical Information of China (English)

    Hai Shen; Yunlong Zhu; Ben Niu; Q.H. Wu

    2009-01-01

    This paper presents an improved group search optimizer (iGSO) for solving mechanical design optimization problems.In the pro-posed algorithm,subpopulations and a co-operation evolutionary strategy were adopted to improve the global search capability and convergence performance.The iGSO is evaluated on two optimization problems of classical mechanical design:spring and pressure vessel.The experimental results are analyzed in comparison with those reported in the literatures.The results show that iGSO has much better convergence performance and is easier to implement in comparison with other existing evolutionary algorithms.

  3. Triple Plate Mold Final Report: Optimization of the Mold Design and Casting Parameters for a Thin U-10mo Fuel Casting

    Energy Technology Data Exchange (ETDEWEB)

    Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-04

    This work describes the experiments and modeling that have been performed to improve and try to optimize the simultaneous casting of three plates of U-10wt%Mo in a single coil vacuum induction melting (VIM) furnace. The plates of interest are 280 mm wide by 203 mm tall by 5 mm thick (11" x 8" x 0.2"). The initial mold design and processing parameters were supplied by Y-12. The mold and casting cavity were instrumented with a number of thermocouples, and the casting performed to determine the thermal history of the mold and casting. The resulting cast plates were radiographed and numerous defects identified. Metallography was performed to help identify the nature of the radiographically observed defects. This information was then used to validate a mold filling and solidification model of that casting. Based on the initial casting, good casting design practice, and process simulation of several design alternatives, a revised design was developed with the goal of minimizing casting defects such as porosity. The redesigned mold had a larger hot-top and had its long axis along the horizontal direction. These changes were to try to develop a strong thermal gradient conducive to good feeding and minimization of micro- and macroporosity in the cast plates. An instrumented casting was then performed with the revised mold design and a linear distributor. This design yielded cast plates with significantly less radiographically identified defects. Unfortunately, there was significant variation in plate weight and metal content in their hot-tops. Fluid flow simulations were then performed on this mold/distributor design. This helped identify the issue with this linear distributor design. Additional simulations were then performed on candidate distributor redesigns and a preferred distributor annular design was identified. This improved annular design was used to produce a third instrumented casting with favorable results. These refined designs and their radiographic

  4. Final Report - Testing of Optimized Bubbler Configuration for HLW Melter VSL-13R2950-1, Rev. 0, dated 6/12/2013

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Albert A.; Pegg, I. L.; Callow, R. A.; Joseph, I.; Matlack, K. S.; Kot, W. K.

    2013-11-13

    The principal objective of this work was to determine the glass production rate increase and ancillary effects of adding more bubbler outlets to the current WTP HLW melter baseline. This was accomplished through testing on the HLW Pilot Melter (DM1200) at VSL. The DM1200 unit was selected for these tests since it was used previously with several HLW waste streams including the four tank wastes proposed for initial processing at Hanford. This melter system was also used for the development and optimization of the present baseline WTP HLW bubbler configuration for the WTP HLW melter, as well as for MACT testing for both HLW and LAW. Specific objectives of these tests were to: Conduct DM1200 melter testing with the baseline WTP bubbling configuration and as augmented with additional bubblers. Conduct DM1200 melter testing to differentiate the effects of total bubbler air flow and bubbler distribution on glass production rate and cold cap formation. Collect melter operating data including processing rate, temperatures at a variety of locations within the melter plenum space, melt pool temperature, glass melt density, and melter pressure with the baseline WTP bubbling configuration and as augmented with additional bubblers. Collect melter exhaust samples to compare particulate carryover for different bubbler configurations. Analyze all collected data to determine the effects of adding more bubblers to the WTP HLW melter to inform decisions regarding future lid re-designs. The work used a high aluminum HLW stream composition defined by ORP, for which an appropriate simulant and high waste loading glass formulation were developed and have been previously processed on the DM1200.

  5. [SIAM conference on optimization

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-10

    Abstracts are presented of 63 papers on the following topics: large-scale optimization, interior-point methods, algorithms for optimization, problems in control, network optimization methods, and parallel algorithms for optimization problems.

  6. Report about the optimization of the biofuel industry sustaining system; Rapport sur l'optimisation du dispositif de soutien a la filiere biocarburants

    Energy Technology Data Exchange (ETDEWEB)

    Prevot, H.; Hespel, V.; Dupre, J.Y.; Baratin, F.; Gagey, D

    2005-07-01

    At the end of 2004, the French government has fixed up the ambitious goal of developing biofuels conformably with the objectives of the 2003/30/CE European directive: the level of blending gasoline and diesel fuels with biofuels should reach 5.75% of the energetic value by 2010. In 2004 this level was only 0.8%, i.e. 7 times less. In order to reach such a goal, the government has implemented two tools: a classical tax exemption tool, already used by other European partners, and a new tool created by the 2005 finances law: the general tax on polluting activities (TGAP). This report presents the main characteristics of biofuel industries and the policies implemented in favor of biofuels. It analyzes the new system and its implementation (tax exemption and TGAP) and proposes new markets for the French agriculture. It recommends to take into considerations the constraints and needs of the fuels market, that the government establishes a new regulation for this market, reforms the existing fiscal system and takes complementary dispositions (intervention at the European Communities level, development of research..). Several appendixes illustrate this report. (J.S.)

  7. Hindlimb Suspension as a Model to Study Ophthalmic Complications in Microgravity Status Report: Optimization of Rat Retina Flat Mounts Staining to Study Vascular Remodeling

    Science.gov (United States)

    Theriot, Corey A.; Zanello, Susana B.

    2014-01-01

    Preliminary data from a prior tissue-sharing experiment has suggested that early growth response protein-1 (Egr1), a transcription factor involved in various stress responses in the vasculature, is induced in the rat retina after 14 days of hindlimb suspension (HS) and may be evidence that mechanical stress is occurring secondary to the cephalad fluid shift. This mechanical stress could cause changes in oxygenation of the retina, and the subsequent ischemia- or inflammation-driven hypoxia may lead to microvascular remodeling. This microvascular remodeling process can be studied using image analysis of retinal vessels and can be then be quantified by the VESsel GENeration Analysis (VESGEN) software, a computational tool that quantifies remodeling patterns of branching vascular trees and capillary or vasculogenic networks. Our project investigates whether rodent HS is a valid model to study the effects of simulated-weightlessness on ocular structures and their relationship with intracranial pressure (ICP). One of the hypotheses to be tested is that HS-induced cephalad fluid shift is accompanied by vascular engorgement that produces changes in retinal oxygenation, leading to oxidative stress, hypoxia, microvascular remodeling, and cellular degeneration. We have optimized the procedure to obtain flat mounts of rat retina, staining of the endothelial lining in vasculature and acquisition of high quality images suitable for VESGEN analysis. Briefly, eyes were fixed in 4% paraformaldehyde for 24 hours and retinas were detached and then mounted flat on microscope slides. The microvascular staining was done with endothelial cell-specific isolectin binding, coupled to Alexa-488 fluorophore. Image acquisition at low magnification and high resolution was performed using a new Leica SP8 confocal microscope in a tile pattern across the X,Y plane and multiple sections along the Z-axis. This new confocal microscope has the added capability of dye separation using the Linear

  8. MPQC: Performance Analysis and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Sarje, Abhinav [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bailey, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-01-24

    MPQC (Massively Parallel Quantum Chemistry) is a widely used computational quantum chemistry code. It is capable of performing a number of computations commonly occurring in quantum chemistry. In order to achieve better performance of MPQC, in this report we present a detailed performance analysis of this code. We then perform loop and memory access optimizations, and measure performance improvements by comparing the performance of the optimized code with that of the original MPQC code. We observe that the optimized MPQC code achieves a significant improvement in the performance through a better utilization of vector processing and memory hierarchies.

  9. Topology Optimization for Convection Problems

    DEFF Research Database (Denmark)

    Alexandersen, Joe

    2011-01-01

    This report deals with the topology optimization of convection problems.That is, the aim of the project is to develop, implement and examine topology optimization of purely thermal and coupled thermomechanical problems,when the design-dependent eects of convection are taken into consideration.......This is done by the use of a self-programmed FORTRAN-code, which builds on an existing 2D-plane thermomechanical nite element code implementing during the course `41525 FEM-Heavy'. The topology optimizationfeatures have been implemented from scratch, and allows the program to optimize elastostatic mechanical...

  10. Squeaky Wheel Optimization

    CERN Document Server

    Clements, D P; 10.1613/jair.561

    2011-01-01

    We describe a general approach to optimization which we term `Squeaky Wheel' Optimization (SWO). In SWO, a greedy algorithm is used to construct a solution which is then analyzed to find the trouble spots, i.e., those elements, that, if improved, are likely to improve the objective function score. The results of the analysis are used to generate new priorities that determine the order in which the greedy algorithm constructs the next solution. This Construct/Analyze/Prioritize cycle continues until some limit is reached, or an acceptable solution is found. SWO can be viewed as operating on two search spaces: solutions and prioritizations. Successive solutions are only indirectly related, via the re-prioritization that results from analyzing the prior solution. Similarly, successive prioritizations are generated by constructing and analyzing solutions. This `coupled search' has some interesting properties, which we discuss. We report encouraging experimental results on two domains, scheduling problems that ari...

  11. XPath Whole Query Optimization

    CERN Document Server

    Maneth, Sebastian

    2010-01-01

    Previous work reports about SXSI, a fast XPath engine which executes tree automata over compressed XML indexes. Here, reasons are investigated why SXSI is so fast. It is shown that tree automata can be used as a general framework for fine grained XML query optimization. We define the "relevant nodes" of a query as those nodes that a minimal automaton must touch in order to answer the query. This notion allows to skip many subtrees during execution, and, with the help of particular tree indexes, even allows to skip internal nodes of the tree. We efficiently approximate runs over relevant nodes by means of on-the-fly removal of alternation and non-determinism of (alternating) tree automata. We also introduce many implementation techniques which allows us to efficiently evaluate tree automata, even in the absence of special indexes. Through extensive experiments, we demonstrate the impact of the different optimization techniques.

  12. Optimality conditions for the numerical solution of optimization problems with PDE constraints :

    Energy Technology Data Exchange (ETDEWEB)

    Aguilo Valentin, Miguel Alejandro; Ridzal, Denis

    2014-03-01

    A theoretical framework for the numerical solution of partial di erential equation (PDE) constrained optimization problems is presented in this report. This theoretical framework embodies the fundamental infrastructure required to e ciently implement and solve this class of problems. Detail derivations of the optimality conditions required to accurately solve several parameter identi cation and optimal control problems are also provided in this report. This will allow the reader to further understand how the theoretical abstraction presented in this report translates to the application.

  13. SCOPE safety-controls optimization by performance evaluation: A systematic approach for safety-related decisions at the Hanford Tank Remediation System. Phase 1, final report

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, K.D.; Williams, D.C.; Slezak, S.E.; Young, M.L. [and others

    1996-12-01

    The Department of Energy`s Hanford Tank Waste Remediation system poses a significant challenge for hazard management because of the uncertainty that surrounds many of the variables that must be considered in decisions on safety and control strategies. As a result, site managers must often operate under excessively conservative and expensive assumptions. This report describes a systematic approach to quantifying the uncertainties surrounding the critical parameters in control decisions (e.g., condition of the tanks, kinds of wastes, types of possible accidents) through the use of expert elicitation methods. The results of the elicitations would then be used to build a decision support system and accident analysis model that would allow managers to see how different control strategies would affect the cost and safety of a facility configuration.

  14. Regional refining models for alternative fuels using shale and coal synthetic crudes: identification and evaluation of optimized alternative fuels. Annual report, March 20, 1979-March 19, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Sefer, N.R.; Russell, J.A.

    1980-11-01

    The initial phase has been completed in the project to evaluate alternative fuels for highway transportation from synthetic crudes. Three refinery models were developed for Rocky Mountain, Mid-Continent and Great Lakes regions to make future product volumes and qualities forecast for 1995. Projected quantities of shale oil and coal oil syncrudes were introduced into the raw materials slate. Product slate was then varied from conventional products to evaluate maximum diesel fuel and broadcut fuel in all regions. Gasoline supplement options were evaluated in one region for 10% each of methanol, ethanol, MTBE or synthetic naphtha in the blends along with syncrude components. Compositions and qualities of the fuels were determined for the variation in constraints and conditions established for the study. Effects on raw materials, energy consumption and investment costs were reported. Results provide the basis to formulate fuels for laboratory and engine evaluation in future phases of the project.

  15. Report on experience gained in the water treatment plant Hoyerswerda/Saxony. Optimization of the utilization of iron salts; Erfahrungsbericht von der Klaeranlage Hoyerswerda/Sachsen. Optimierung des Einsatzes von Eisensalzen

    Energy Technology Data Exchange (ETDEWEB)

    Metan, H.J. [Versorgungsbetriebe Hoyerswerda GmbH (Germany). Klaeranlage; Scheffer, W. [Kronos International Inc., GB Wasserchemie, Langenfeld (Germany)

    1997-11-01

    This article reports on the operation of a waste processing plant in Hoyerswerda, Germany. The operation could be optimized by using KRONOFLOC iron(II)-chloride solution. With this iron salt several processes are possible: elimination of hydrogen sulfides and phosphates, desulfurization of digester gas, conditioning of sewage sludge and filtration by flocculation. (SR) [Deutsch] Die Aufgabe `Betriebskosteneinsparung durch Optimierung des Einsatzes von Eisensalzen` konnte erfuellt werden. Nach einer ueberschlaegigen Kalkulation liegt die Kostenersparnis insgesamt bei mehreren Zehntausend-DM. Eine Gesamtkostenbilanz ist nur schwer abschaetzbar, die Ergebnisse sind jedoch auf andere Klaeranlagen dieser Groesse und Bauart uebertragbar. Nur ein Faellungs- und Flockungsmittel wurde in die vorhandene Verfahrenstechnik integriert. Vorteile durch den Einsatz der neuen Eisen-II-chlorid-Loesung KRONO-FLOC ergeben sich vor allem durch: - Universelle Einsetzbarkeit - ein guenstiges Preis-/Leistungsverhaeltnis - gute Verfuegbarkeit des Produktes - gleichbleibende Qualitaet, d.h. konstante Wirksubstanz - Betriebssicherheit auch im Winter bei ueber -20 C. - Hohen Reinheitsstandard, d.h. niedrige Schwermetallkonzentrationen. (orig.)

  16. Shallow Water Offshore Wind Optimization for the Great Lakes (DE-FOA-0000415) Final Report: A Conceptual Design for Wind Energy in the Great Lakes

    Energy Technology Data Exchange (ETDEWEB)

    Wissemann, Chris [Freshwater Wind I, LLC; White, Stanley M [Stanley White Engineering LLC

    2014-02-28

    The primary objective of the project was to develop a innovative Gravity Base Foundation (GBF) concepts, including fabrication yards, launching systems and installation equipment, for a 500MW utility scale project in the Great Lakes (Lake Erie). The goal was to lower the LCOE by 25%. The project was the first to investigate an offshore wind project in the Great Lakes and it has furthered the body of knowledge for foundations and installation methods within Lake Erie. The project collected historical geotechnical information for Lake Erie and also used recently obtained data from the LEEDCo Icebreaker Project (FOA DE-EE0005989) geotechnical program to develop the conceptual designs. Using these data-sets, the project developed design wind and wave conditions from actual buoy data in order to develop a concept that would de-risk a project using a GBF. These wind and wave conditions were then utilized to create reference designs for various foundations specific to installation in Lake Erie. A project partner on the project (Weeks Marine) provided input for construction and costing the GBF fabrication and installation. By having a marine contractor with experience with large marine projects as part of the team provides credibility to the LCOE developed by NREL. NREL then utilized the design and construction costing information as part of the LCOE model. The report summarizes the findings of the project. • Developed a cost model and “baseline” LCOE • Documented Site Conditions within Lake Erie • Developed Fabrication, Installation and Foundations Innovative Concept Designs • Evaluated LCOE Impact of Innovations • Developed Assembly line “Rail System” for GBF Construction and Staging • Developed Transit-Inspired Foundation Designs which incorporated: Semi-Floating Transit with Supplemental Pontoons Barge mounted Winch System • Developed GBF with “Penetration Skirt” • Developed Integrated GBF with Turbine Tower • Developed Turbine, Plant

  17. Milestone Report #2: Direct Evaporator Leak and Flammability Analysis Modifications and Optimization of the Organic Rankine Cycle to Improve the Recovery of Waste Heat

    Energy Technology Data Exchange (ETDEWEB)

    Donna Post Guillen

    2013-09-01

    The direct evaporator is a simplified heat exchange system for an Organic Rankine Cycle (ORC) that generates electricity from a gas turbine exhaust stream. Typically, the heat of the exhaust stream is transferred indirectly to the ORC by means of an intermediate thermal oil loop. In this project, the goal is to design a direct evaporator where the working fluid is evaporated in the exhaust gas heat exchanger. By eliminating one of the heat exchangers and the intermediate oil loop, the overall ORC system cost can be reduced by approximately 15%. However, placing a heat exchanger operating with a flammable hydrocarbon working fluid directly in the hot exhaust gas stream presents potential safety risks. The purpose of the analyses presented in this report is to assess the flammability of the selected working fluid in the hot exhaust gas stream stemming from a potential leak in the evaporator. Ignition delay time for cyclopentane at temperatures and pressure corresponding to direct evaporator operation was obtained for several equivalence ratios. Results of a computational fluid dynamic analysis of a pinhole leak scenario are given.

  18. Optimal Molecular Methods in Detecting p190BCR-ABL Fusion Variants in Hematologic Malignancies: A Case Report and Review of the Literature

    Directory of Open Access Journals (Sweden)

    Rebecca J. Sonu

    2015-01-01

    Full Text Available Patients with BCR-ABL1 positive hematologic malignancies and Philadelphia-like B-lymphoblastic leukemia (B-ALL are potential candidates for targeted therapy with tyrosine kinase inhibitors (TKI. Before TKIs, patients with B-ALL had a much worse prognosis and current treatments with targeted TKI therapy have improved outcomes. Thus, the detection of BCR-ABL1 is crucial and a false negative BCR-ABL1 result may adversely affect patient care. We report a case of a 76-year-old male with a new diagnosis of B-ALL who was initially found to be BCR-ABL1 negative by quantitative polymerase chain reaction (PCR. A concurrent qualitative PCR was performed which detected a positive BCR-ABL1 result that was confirmed by a next generation sequencing (NGS based assay and identified as the rare fusion variant e1a3 of p190BCR-ABL. Based on this result, the patient was placed on dasatinib as a targeted therapy. In the era of molecular diagnostic medicine and targeted therapy, it is essential to have an understanding of the limitations of molecular assays and to follow a comprehensive diagnostic approach in order to detect common abnormalities and rare variants. Incorporating NGS methods in an algorithmic manner into the standard diagnostic PCR-based approach for BCR-ABL1 will aid in minimizing false negative results.

  19. Optimization of Processing and Modeling Issues for Thin-Film Solar Cell Devices; Annual Report, 3 February 1997-2 February 1998

    Energy Technology Data Exchange (ETDEWEB)

    Birkmire, R. W.; Phillips, J. E.; Shafarman, W. N.; Hegedus, S. S.; McCandless, B. E. (IEC, University of Delaware)

    1998-12-08

    This report describes results achieved during phase I of a four-phase subcontract to develop and understand thin-film solar cell technology associated with CuInSe2 and related alloys, a-Si and its alloys, and CdTe. Modules based on all these thin films are promising candidates to meet DOE long-range efficiency, reliability, and manufacturing cost goals. The critical issues being addressed under this program are intended to provide the science and engineering basis for developing viable commercial processes and to improve module performance. The generic research issues addressed are: (1) quantitative analysis of processing steps to provide information for efficient commercial-scale equipment design and operation; (2) device characterization relating the device performance to materials properties and process conditions; (3) development of alloy materials with different bandgaps to allow improved device structures for stability and compatibility with module design; (4) development of improved window/heterojunction layers and contacts to improve device performance and reliability; and (5) evaluation of cell stability with respect to illumination, temperature, and ambient and with respect to device structure and module encapsulation.

  20. Optimization of laser scribing for thin-film PV modules. Final technical progress report, 12 April 1995--11 October 1997

    Energy Technology Data Exchange (ETDEWEB)

    Compaan, A.D.; Matulionis, I.; Nakade, S. [Univ. of Toledo, OH (United States)

    1998-06-01

    This report covers the work done by the University of Toledo under this subcontract. Researchers determined the threshold power densities for the onset of ablation from thin films of CdTe, CuInSe{sub 2}, SnO{sub 2}:F, ZnO:Al, gold, and molybdenum for 12 different wavelength laser systems using wide variations of laser pulse durations. Optimum energy density for the most efficient removal of material during scribing strongly depends on the wavelength of the laser and, to a smaller extent, on the pulse duration. The optimum energy densities range from 0.5 J/sq cm for the 532-nm, 8-nsec YAG pulse on CdTe to 0.2 J/sq cm for the excimer laser at 308 nm on CIS. Poor scribing of CdTe was seen with the 1064-nm beam, ZnO was scribed poorly by all lasers except for the excimer laser. Excellent scribe profiles were observed with the 308-nm excimer lasers on all materials including ZnO.

  1. Noble metal recycling. Project 2: Optimization of discontinuous thermal processes (emission reduction). Final report; Edelmetallrecycling. Teilvorhaben 2: Weiterentwicklung der Verfahrenstechnik bei diskontinuierlichen thermischen Prozessen (Emissionsminderung). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Baumbach, G.; Berger, R.

    2000-10-01

    A batch operated incineration process, used for the recycling of precious metals is described in the report. The development of a new combined pyrolysis/oxidation Process is the main focus of the work. This new process has several remarkable advantages compared to traditionally used techniques. The optimisation of the process with a modern fuzzy based control technique is described in detail. The emissions of the process were reduced considerably applying the new process and the innovative control technique. Furthermore the layout of several components of the new process can be reduced in the future. The developed techniques can also be applied in other thermal processes, especially batch processes. Additionally the application of catalysts for PCDD/PCDF reduction in the flue gas upstream and downstream of the filter was investigated. Whereas the catalyst performed well, as expected, downstream of the filter, no acceptable operation was possible upstream of the filter. As the reheating downstream the filter is economically not feasible the application of catalysts is not applicable for the describe process. (orig.) [German] Die Arbeit beschreibt einen diskontinuierlichen thermischen Prozess, der zur Rueckgewinnung von Edelmetallen eingesetzt wird. Der Schwerpunkt der Arbeit liegt auf der Entwicklung eines neuartigen kombinierten Pyrolyse/Oxidations-Prozesses, der gegenueber den traditionell eingesetzten Anlagen grosse Vorteile aufweist. Die Optimierung dieses Prozesses mit Hilfe modernster Fuzzy-Regelungstechnik wird detailliert beschrieben. Mit dem neuen Verfahren und den innovativen Regelungstechniken konnten die Emissionen des Prozesses merklich gesenkt werden, ohne den Energiebedarf negativ zu beeinflussen. Ausserdem koennen zukuenftige Anlagen kleiner ausgelegt werden. Die entwickelten Verfahren koennen auch auf andere thermische Prozesse uebertragen werden. Weiterhin wurde der Einsatz von Katalysatoren zur PCDD/PCDF-Minderung im Rein- und Rohgas untersucht

  2. Optimization of transparent and reflecting electrodes for amorphous silicon solar cells. Annual subcontract report, 1 May 1991--30 April 1992

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, R.G. [Harvard Univ., Cambridge, MA (United States). Dept. of Chemistry

    1993-04-01

    This report describes work to improve the performance of solar cells by improving the electrical and optical properties of their transparent conducting oxides (TCO) layers. Boron-doped zinc-oxide films were deposited by atmospheric pressure chemical vapor deposition in a laminar-flow reactor from diethyl zinc, tert-butanol, and diborane in the temperature range between 300{degrees}C and 420{degrees}C. When the deposition temperature was above 320{degrees}C, both doped and undoped films have highly oriented crystallites with their c-axes perpendicular to the substrate plane. Films deposited from 0.07% diethyl zinc and 2.4% tert-butanol have electron densities between 3.5 {times} 10{sup 20} cm{sup {minus}3} and 5.5 {times} 10{sup 20} cm{sup {minus}3}, conductivities between 250 {Omega}{sup {minus}1} and 2500 {Omega}{sup {minus}1} and mobilities between 2.5 cm{sup 2}/V-s and 35.0 cm{sup 2}/V-s, depending on dopant concentration, film thickness, and deposition temperature. Optical measurements show that the maximum infrared reflectance of the doped films is close to 90%, compared to about 20% for undoped films. Film visible absorption and film conductivity were found to increase with film thickness. The ratio of conductivity to visible absorption coefficient for doped films was between 0.1 {Omega} and 1.1 {Omega}{sup {minus}1}. The band gap of the film changes from 3.3 eV to 3.7 eV when the film is doped with 0.012% diborane.

  3. Combinatorial optimization with Boolean constraints

    Energy Technology Data Exchange (ETDEWEB)

    Hulme, B.L.; Worrell, R.B.

    1983-02-01

    This report shows how Boolean algebraic formula manipulation can be used to solve certain kinds of optimization problems. If the problem can be formulated in terms of 0 to 1 variables and if the feasible solutions can be described by a Boolean equation, then the method of this report can be used. The method generates feasible solutions algebraically as terms of a disjunctive normal form of a Boolean function. Many small sample problems are solved to illustrate the method and the practical situations in which these optimization problems arise.

  4. THE MARKETING MIX OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    SABOU FELICIA

    2014-02-01

    Full Text Available ing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to optimize the marketing mix, because of how its combines and integrates company policies relating to the product, price, distribution and promotion, depends the success or the failure on its market. The practice has shown that if an element of the marketing mix is wrong implemented, marketing strategies and programs do not achieve their objectives, and the company can not generate the expected profit. To optimize the marketing mix, companies should consider the following issues: the resources (materials, financial and human, which will be properly allocated to all the elements of the marketing mix, the specific marketing tools and the relationship of interdependence of all the methods and tools used to optimize the marketing mix.

  5. Multiple Satellite Trajectory Optimization

    Science.gov (United States)

    2004-12-01

    SOLVING OPTIMAL CONTROL PROBLEMS ........................................5...OPTIMIZATION A. SOLVING OPTIMAL CONTROL PROBLEMS The driving principle used to solve optimal control problems was first formalized by the Soviet...methods and processes of solving optimal control problems , this section will demonstrate how the formulations work as expected. Once coded, the

  6. Antenna optimization using Particle Swarm Optimization algorithm

    Directory of Open Access Journals (Sweden)

    Golubović Ružica M.

    2006-01-01

    Full Text Available We present the results for two different antenna optimization problems that are found using the Particle Swarm Optimization (PSO algorithm. The first problem is finding the maximal forward gain of a Yagi antenna. The second problem is finding the optimal feeding of a broadside antenna array. The optimization problems have 6 and 20 optimization variables, respectively. The preferred values of the parameters of the PSO algorithm are found for presented problems. The results show that the preferred parameters of PSO are somewhat different for optimization problems with different number of dimensions of the optimization space. The results that are found using the PSO algorithm are compared with the results that are found using other optimization algorithms, in order to estimate the efficiency of the PSO.

  7. Multiobjective Optimization and Phase Transitions

    CERN Document Server

    Seoane, Luís F

    2015-01-01

    Many complex systems obey to optimality conditions that are usually not simple. Conflicting traits often interact making a Multi Objective Optimization (MOO) approach necessary. Recent MOO research on complex systems report about the Pareto front (optimal designs implementing the best trade-off) in a qualitative manner. Meanwhile, research on traditional Simple Objective Optimization (SOO) often finds phase transitions and critical points. We summarize a robust framework that accounts for phase transitions located through SOO techniques and indicates what MOO features resolutely lead to phase transitions. These appear determined by the shape of the Pareto front, which at the same time is deeply related to the thermodynamic Gibbs surface. Indeed, thermodynamics can be written as an MOO from where its phase transitions can be parsimoniously derived; suggesting that the similarities between transitions in MOO-SOO and Statistical Mechanics go beyond mere coincidence.

  8. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region (International Symposium `98); Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan and Asian countries, the optimized treatment of industrial waste is the problem with the economic growth. Border-crossing movement of the waste for promotion of the renewable use is also a problem. Therefore, the International Symposium `98 on the industrial waste problem in the Asian region was held. China, Thailand, the Philippines and Korea were invited to Japan to give lectures. MITI of Japan reported on the present situation of Japan and the cooperation with Asian countries. The industrial circle reported on efforts for environmental protection measures to be taken, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention on recycling activities, Japan`s role in Asia, etc. In the panel discussion, promotion of cooperation for recycling technology and Japan`s support for formulating strategy on the industrial waste were requested to Japan, and the construction of an Asian area network was proposed. Concerning the cooperative system between governments and private companies, it was concluded that it was necessary to discuss it considering the actual state of each country. Importance of recycle and information exchange was realized again. 10 refs., 15 figs., 27 tabs.

  9. Maximizing Academic Success: Introducing the Concept of Optimized Functioning

    Science.gov (United States)

    Phan, Huy P.

    2015-01-01

    This research article reports on two correlational studies that examined the notion of "optimized functioning." Optimized functioning, introduced in a recent published study, offers an alternative approach into the understanding of optimization. Optimized functioning is proposed to consist of four distinctive components: personal…

  10. Optimization modeling with spreadsheets

    CERN Document Server

    Baker, Kenneth R

    2015-01-01

    An accessible introduction to optimization analysis using spreadsheets Updated and revised, Optimization Modeling with Spreadsheets, Third Edition emphasizes model building skills in optimization analysis. By emphasizing both spreadsheet modeling and optimization tools in the freely available Microsoft® Office Excel® Solver, the book illustrates how to find solutions to real-world optimization problems without needing additional specialized software. The Third Edition includes many practical applications of optimization models as well as a systematic framework that il

  11. Optimal Experience of Web Activities.

    Science.gov (United States)

    Chen, Hsiang; Wigand, R. T.; Nilan, M. S.

    1999-01-01

    Reports on Web users' optimal flow experiences to examine positive aspects of Web experiences that could be linked to theory applied to other media and then incorporated into Web design. Discusses the use of content-analytic procedures to analyze open-ended questionnaires that examined Web users' perceived flow experiences. (Author/LRW)

  12. Wind Electrolysis: Hydrogen Cost Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saur, G.; Ramsden, T.

    2011-05-01

    This report describes a hydrogen production cost analysis of a collection of optimized central wind based water electrolysis production facilities. The basic modeled wind electrolysis facility includes a number of low temperature electrolyzers and a co-located wind farm encompassing a number of 3MW wind turbines that provide electricity for the electrolyzer units.

  13. Robust Constrained Blackbox Optimization with Surrogates

    Science.gov (United States)

    2015-05-21

    numbers assigned by the performing organization, e.g. BRL-1234; AFWL-TR-85-4017-Vol-21- PT -2. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES...during reporting pe - riod: Published: 1. C. Audet, S. Le Digabel, and M. Peyrega. Linear equalities in blackbox optimization. Computational Optimization...A.E. Gheribi, S. Le Digabel, C. Audet, and P. Chartrand. Identifying optimal conditions for magnesium based alloy design using the mesh adaptive direct

  14. Heavy Ion Fusion Science Virtual National Laboratory 4th Quarter 2009 Milestone Report: Measure and simulate target temperature and dynamic response in optimized NDCX-I configurations with initial diagnostics suite

    Energy Technology Data Exchange (ETDEWEB)

    Bieniosek, F.M.; Barnard, J.J.; Henestroza, E.; Logan, B.G.; Lidia, S.; More, R.M.; Ni, P.A.; Seidl, P.A.; Vay, J.-L.; Grote, D.; Friedman, A.

    2009-09-30

    This milestone has been met. The effort contains two main components: (1) Experimental results of warm dense matter target experiments on optimized NDCX-I configurations that include measurements of target temperature and transient target behavior. (2) A theoretical model of the target response to beam heating that includes an equilibrium heating model of the target foil and a model for droplet formation in the target for comparison with experimental results. The experiments on ion-beam target heating use a 300-350-keV K{sup +} pulsed beam from the Neutralized Compression Drift Experiment (NDCX-I) accelerator at LBNL. The NDCX-I accelerator delivers an uncompressed pulse beam of several microseconds with a typical power density of >100 kW/cm{sup 2} over a final focus spot size of about 1 mm. An induction bunching module the NDCX-I compresses a portion of the beam pulse to reach a much higher power density over 2 nanoseconds. Under these conditions the free-standing foil targets are rapidly heated to temperatures to over 4000 K. We model the target thermal dynamics using the equation of heat conduction for the temperature T(x,t) as a function of time (t) and spatial dimension along the beam direction (x). The competing cooling processes release energy from the surface of the foil due to evaporation, radiation, and thermionic (Richardson) emission. A description of the experimental configuration of the target chamber and results from initial beam-target experiments are reported in our FY08 4th Quarter and FY09 2nd Quarter Milestone Reports. The WDM target diagnostics include a high-speed multichannel optical pyrometer, optical streak camera, VISAR, and high-speed gated cameras. The fast optical pyrometer is a unique and significant new diagnostic which provides valuable information on the temperature evolution of the heated target.

  15. Optimal Conventional and Semi-Natural Treatments for the Upper Yakima Spring Chinook Salmon Supplementation Project; Treatment Definitions and Descriptions and Biological Specifications for Facility Design, 1995-1999 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hager, Robert C. (Hatchery Operations Consulting); Costello, Ronald J. (Mobrand Biometrics, Inc., Vashon Island, WA)

    1999-10-01

    This report describes the Yakima Fisheries Project facilities (Cle Elum Hatchery and acclimation satellites) which provide the mechanism to conduct state-of-the-art research for addressing questions about spring chinook supplementation strategies. The definition, descriptions, and specifications for the Yakima spring chinook supplementation program permit evaluation of alternative fish culture techniques that should yield improved methods and procedures to produce wild-like fish with higher survival that can be used to rebuild depleted spring chinook stocks of the Columbia River Basin. The definition and description of three experimental treatments, Optimal Conventional (OCT), Semi-Natural (SNT), Limited Semi-Natural (LSNT), and the biological specifications for facilities have been completed for the upper Yakima spring chinook salmon stock of the Yakima Fisheries Project. The task was performed by the Biological Specifications Work Group (BSWG) represented by Yakama Indian Nation, Washington Department of Fish and Wildlife, National Marine Fisheries Service, and Bonneville Power Administration. The control and experimental variables of the experimental treatments (OCT, SNT, and LSNT) are described in sufficient detail to assure that the fish culture facilities will be designed and operated as a production scale laboratory to produce and test supplemented upper Yakima spring chinook salmon. Product specifications of the treatment groups are proposed to serve as the generic templates for developing greater specificity for measurements of product attributes. These product specifications will be used to monitor and evaluate treatment effects, with respect to the biological response variables (post release survival, long-term fitness, reproductive success and ecological interactions).

  16. Topological Optimization of Artificial Microstructure Strategies

    Science.gov (United States)

    2015-04-02

    Topographic Optimization Through Artificial Microstructure Strategies During this project as part of DARPA MCMA we aimed to develop and demonstrate...Topographic Optimization Through Artificial Microstructure Strategies Report Title During this project as part of DARPA MCMA we aimed to develop and...Artificial Microstructure Strategies (Yale and Johns Hopkins) During DARPA MCMA we aimed to develop and demonstrate a 3D microstructural

  17. Applications of combinatorial optimization

    CERN Document Server

    Paschos, Vangelis Th

    2013-01-01

    Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aims to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization. "Applications of Combinatorial Optimization" is presenting a certain number among the most common and well-known applications of Combinatorial Optimization.

  18. New Hoopoe Heuristic Optimization

    OpenAIRE

    El-Dosuky, Mohammed; EL-Bassiouny, Ahmed; Hamza, Taher; Rashad, Magdy

    2012-01-01

    Most optimization problems in real life applications are often highly nonlinear. Local optimization algorithms do not give the desired performance. So, only global optimization algorithms should be used to obtain optimal solutions. This paper introduces a new nature-inspired metaheuristic optimization algorithm, called Hoopoe Heuristic (HH). In this paper, we will study HH and validate it against some test functions. Investigations show that it is very promising and could be seen as an optimi...

  19. HCCI Engine Optimization and Control

    Energy Technology Data Exchange (ETDEWEB)

    Rolf D. Reitz

    2005-09-30

    The goal of this project was to develop methods to optimize and control Homogeneous-Charge Compression Ignition (HCCI) engines, with emphasis on diesel-fueled engines. HCCI offers the potential of nearly eliminating IC engine NOx and particulate emissions at reduced cost over Compression Ignition Direct Injection engines (CIDI) by controlling pollutant emissions in-cylinder. The project was initiated in January, 2002, and the present report is the final report for work conducted on the project through December 31, 2004. Periodic progress has also been reported at bi-annual working group meetings held at USCAR, Detroit, MI, and at the Sandia National Laboratories. Copies of these presentation materials are available on CD-ROM, as distributed by the Sandia National Labs. In addition, progress has been documented in DOE Advanced Combustion Engine R&D Annual Progress Reports for FY 2002, 2003 and 2004. These reports are included as the Appendices in this Final report.

  20. Axillary budbreak in a cut rose crop as influenced by light intensity and red:far-red ratio at bud level

    NARCIS (Netherlands)

    Wubs-Timmermans, A.M.; Heuvelink, E.; Marcelis, L.F.M.; Buck-Sorlin, G.H.; Vos, J.

    2014-01-01

    When flower-bearing shoots in cut rose (Rosa ·hybrida) are harvested, a varying number of repressed axillary buds on the shoot remainder start to grow into new shoots (budbreak). Earlier experiments indicated that light reaching the bud affected the number of budbreaks. In all these studies, whole p

  1. The Properties of the 500 K Dwarf UGPS J072227.51-054031.2, and a Study of the Far-Red Flux of Cold Brown Dwarfs

    CERN Document Server

    Leggett, S K; Marley, M S; Lodders, K; Canty, J; Lucas, P; Smart, R L; Tinney, C G; Homeier, D; Allard, F; Burningham, Ben; Day-Jones, A; Fegley, B; Ishii, Miki; Jones, H R A; Marocco, F; Pinfield, D J; Tamura, M

    2012-01-01

    We present i and z photometry for 25 T dwarfs and one L dwarf. Combined with published photometry, the data show that the i - z, z - Y and z - J colors of T dwarfs are very red, and continue to increase through to the late-type T dwarfs, with a hint of a saturation for the latest types with T_eff ~ 600 K. We present new 0.7-1.0 um and 2.8-4.2 um spectra for the very late-type T dwarf UGPS J072227.51-054031.2, as well as improved astrometry for this dwarf. Examination of the spectral energy distribution using the new and published data, with Saumon & Marley models, shows that the dwarf has T_eff = 505 +/- 10 K, a mass of 3-11 M_Jupiter and an age between 60 Myr and 1 Gyr. This young age is consistent with the thin disk kinematics of the dwarf. The mass range overlaps with that usually considered to be planetary, despite this being an unbound object discovered in the field near the Sun. This apparently young rapid rotator is also undergoing vigorous atmospheric mixing, as determined by the IRAC and WISE-2 4...

  2. From red to blue to far-red in Lhca4 : How does the protein modulate the spectral properties of the pigments?

    NARCIS (Netherlands)

    Wientjes, Emilie; Roest, Gemma; Croce, Roberta

    The first event of photosynthesis is the harvesting of solar energy by a large array of pigments. These pigments are coordinated to proteins that organize them to assure efficient excitation energy transfer. The protein plays an essential role in tuning the spectroscopic properties of the pigments,

  3. Axillary budbreak in a cut rose crop as influenced by light intensity and red:far-red ratio at bud level

    NARCIS (Netherlands)

    Wubs-Timmermans, A.M.; Heuvelink, E.; Marcelis, L.F.M.; Buck-Sorlin, G.H.; Vos, J.

    2014-01-01

    When flower-bearing shoots in cut rose (Rosa ·hybrida) are harvested, a varying number of repressed axillary buds on the shoot remainder start to grow into new shoots (budbreak). Earlier experiments indicated that light reaching the bud affected the number of budbreaks. In all these studies, whole

  4. From red to blue to far-red in Lhca4 : How does the protein modulate the spectral properties of the pigments?

    NARCIS (Netherlands)

    Wientjes, Emilie; Roest, Gemma; Croce, Roberta

    2012-01-01

    The first event of photosynthesis is the harvesting of solar energy by a large array of pigments. These pigments are coordinated to proteins that organize them to assure efficient excitation energy transfer. The protein plays an essential role in tuning the spectroscopic properties of the pigments,

  5. Application of 730 nm Far Red Light LEDs in Horticulture Lighting%730 nm远红光LED在植物照明中的应用

    Institute of Scientific and Technical Information of China (English)

    陈文成

    2015-01-01

    简要阐述植物光合色素和光敏色素的吸收光谱,阐明远红光对植物生长发育的重要性.结合欧司朗光电半导体专为园艺照明新推出的远红光LED产品,指出采用深蓝(450 nm)、超红(660nm)、远红(730 nm)光和白光LED的适当组合,可为多种植物提供更好的照明环境.

  6. Folate receptor-mediated enhanced and specific delivery of far-red light-activatable prodrugs of combretastatin A-4 to FR-positive tumor.

    Science.gov (United States)

    Nkepang, Gregory; Bio, Moses; Rajaputra, Pallavi; Awuah, Samuel G; You, Youngjae

    2014-12-17

    We examined the concept of a novel prodrug strategy in which anticancer drug can be locally released by visible/near IR light, taking advantage of the photodynamic process and photo-unclick chemistry. Our most recently formulated prodrug of combretastatin A-4, Pc-(L-CA4)2, showed multifunctionality for fluorescence imaging, light-activated drug release, and the combined effects of PDT and local chemotherapy. In this formulation, L is a singlet oxygen cleavable linker. Here, we advanced this multifunctional prodrug by adding a tumor-targeting group, folic acid (FA). We designed and prepared four FA-conjugated prodrugs 1-4 (CA4-L-Pc-PEGn-FA: n = 0, 2, 18, ∼45) and one non-FA-conjugated prodrug 5 (CA4-L-Pc-PEG18-boc). Prodrugs 3 and 4 had a longer PEG spacer and showed higher hydrophilicity, enhanced uptake to colon 26 cells via FR-mediated mechanisms, and more specific localization to SC colon 26 tumors in Balb/c mice than prodrugs 1 and 2. Prodrug 4 also showed higher and more specific uptake to tumors, resulting in selective tumor damage and more effective antitumor efficacy than non-FA-conjugated prodrug 5. FR-mediated targeting seemed to be an effective strategy to spare normal tissues surrounding tumors in the illuminated area during treatment with this prodrug.

  7. Folate Receptor-Mediated Enhanced and Specific Delivery of Far-Red Light-Activatable Prodrugs of Combretastatin A-4 to FR-Positive Tumor

    OpenAIRE

    Nkepang, Gregory; Bio, Moses; Rajaputra, Pallavi; Awuah, Samuel G.; You, Youngjae

    2014-01-01

    We examined the concept of a novel prodrug strategy in which anticancer drug can be locally released by visible/near IR light, taking advantage of the photodynamic process and photo-unclick chemistry. Our most recently formulated prodrug of combretastatin A-4, Pc-(L-CA4)2, showed multifunctionality for fluorescence imaging, light-activated drug release, and the combined effects of PDT and local chemotherapy. In this formulation, L is a singlet oxygen cleavable linker. Here, we advanced this m...

  8. Optimization of electrospinning parameters for chitosan nanofibres

    CSIR Research Space (South Africa)

    Jacobs, V

    2011-06-01

    Full Text Available Electrospinning of chitosan, a naturally occurring polysaccharide biopolymer, has been investigated. In this paper, the authors report the optimization of electrospinning process and solution parameters using factorial design approach to obtain...

  9. Rule-Based Optimization of Reversible Circuits

    CERN Document Server

    Arabzadeh, Mona; Zamani, Morteza Saheb

    2010-01-01

    Reversible logic has applications in various research areas including low-power design and quantum computation. In this paper, a rule-based optimization approach for reversible circuits is proposed which uses both negative and positive control Toffoli gates during the optimization. To this end, a set of rules for removing NOT gates and optimizing sub-circuits with common-target gates are proposed. To evaluate the proposed approach, the best-reported synthesized circuits and the results of a recent synthesis algorithm which uses both negative and positive controls are used. Our experiments reveal the potential of the proposed approach in optimizing synthesized circuits.

  10. Optimization of Biofuel Production From Transgenic Microalgae

    Science.gov (United States)

    2013-02-27

    AFRL-OSR-VA-TR-2013-0145 OPTIMIZATION OF BIOFUEL PRODUCTION FROM TRANSGENIC MICROALGAE Richard Sayre Donald Danforth...Technical 20080815 to 20120630 OPTIMIZATION OF BIOFUEL PRODUCTION FROM TRANSGENIC MICROALGAE FA9550-08-1-0451 Richard Sayre Donald Danforth Plant...BIOFUEL PRODUCTION FROM TRANSGENIC MICROALGAE Grant/Contract Number: FA9550-08-1-0451 Reporting Period: Final Report Abstract: We have compared the

  11. Mechanical Design Optimization Using Advanced Optimization Techniques

    CERN Document Server

    Rao, R Venkata

    2012-01-01

    Mechanical design includes an optimization process in which designers always consider objectives such as strength, deflection, weight, wear, corrosion, etc. depending on the requirements. However, design optimization for a complete mechanical assembly leads to a complicated objective function with a large number of design variables. It is a good practice to apply optimization techniques for individual components or intermediate assemblies than a complete assembly. Analytical or numerical methods for calculating the extreme values of a function may perform well in many practical cases, but may fail in more complex design situations. In real design problems, the number of design parameters can be very large and their influence on the value to be optimized (the goal function) can be very complicated, having nonlinear character. In these complex cases, advanced optimization algorithms offer solutions to the problems, because they find a solution near to the global optimum within reasonable time and computational ...

  12. Benchmarking optimization solvers for structural topology optimization

    DEFF Research Database (Denmark)

    Rojas Labanda, Susana; Stolpe, Mathias

    2015-01-01

    The purpose of this article is to benchmark different optimization solvers when applied to various finite element based structural topology optimization problems. An extensive and representative library of minimum compliance, minimum volume, and mechanism design problem instances for different...... sizes is developed for this benchmarking. The problems are based on a material interpolation scheme combined with a density filter. Different optimization solvers including Optimality Criteria (OC), the Method of Moving Asymptotes (MMA) and its globally convergent version GCMMA, the interior point...... profiles conclude that general solvers are as efficient and reliable as classical structural topology optimization solvers. Moreover, the use of the exact Hessians in SAND formulations, generally produce designs with better objective function values. However, with the benchmarked implementations solving...

  13. Microgenetic optimization algorithm for optimal wavefront shaping

    CERN Document Server

    Anderson, Benjamin R; Gunawidjaja, Ray; Eilers, Hergen

    2015-01-01

    One of the main limitations of utilizing optimal wavefront shaping in imaging and authentication applications is the slow speed of the optimization algorithms currently being used. To address this problem we develop a micro-genetic optimization algorithm ($\\mu$GA) for optimal wavefront shaping. We test the abilities of the $\\mu$GA and make comparisons to previous algorithms (iterative and simple-genetic) by using each algorithm to optimize transmission through an opaque medium. From our experiments we find that the $\\mu$GA is faster than both the iterative and simple-genetic algorithms and that both genetic algorithms are more resistant to noise and sample decoherence than the iterative algorithm.

  14. Particle Swarm Optimization Toolbox

    Science.gov (United States)

    Grant, Michael J.

    2010-01-01

    The Particle Swarm Optimization Toolbox is a library of evolutionary optimization tools developed in the MATLAB environment. The algorithms contained in the library include a genetic algorithm (GA), a single-objective particle swarm optimizer (SOPSO), and a multi-objective particle swarm optimizer (MOPSO). Development focused on both the SOPSO and MOPSO. A GA was included mainly for comparison purposes, and the particle swarm optimizers appeared to perform better for a wide variety of optimization problems. All algorithms are capable of performing unconstrained and constrained optimization. The particle swarm optimizers are capable of performing single and multi-objective optimization. The SOPSO and MOPSO algorithms are based on swarming theory and bird-flocking patterns to search the trade space for the optimal solution or optimal trade in competing objectives. The MOPSO generates Pareto fronts for objectives that are in competition. A GA, based on Darwin evolutionary theory, is also included in the library. The GA consists of individuals that form a population in the design space. The population mates to form offspring at new locations in the design space. These offspring contain traits from both of the parents. The algorithm is based on this combination of traits from parents to hopefully provide an improved solution than either of the original parents. As the algorithm progresses, individuals that hold these optimal traits will emerge as the optimal solutions. Due to the generic design of all optimization algorithms, each algorithm interfaces with a user-supplied objective function. This function serves as a "black-box" to the optimizers in which the only purpose of this function is to evaluate solutions provided by the optimizers. Hence, the user-supplied function can be numerical simulations, analytical functions, etc., since the specific detail of this function is of no concern to the optimizer. These algorithms were originally developed to support entry

  15. Optimization of composite laminates

    Science.gov (United States)

    Gurdal, Zafer; Haftka, Raphael T.

    Design of composite structures can be viewed as a multi-faceted task, one which requires integration of issues related to composite mechanics, structural analysis, optimization, and manufacturing. The major coverage of the paper is on the issue of optimization, with special emphasis on the use of optimization for designing with discrete and integer valued variables required for the stacking-sequence optimization. Different techniques that can be used for stacking sequence optimization are introduced, and different aspects of their application are demonstrated for laminate buckling optimization.

  16. Optimization, validation, and application of a real-time PCR protocol for quantification of viable bacterial cells in municipal sewage sludge and biosolids using reporter genes and Escherichia coli.

    Science.gov (United States)

    van Frankenhuyzen, Jessica K; Trevors, Jack T; Flemming, Cecily A; Lee, Hung; Habash, Marc B

    2013-11-01

    Biosolids result from treatment of sewage sludge to meet jurisdictional standards, including pathogen reduction. Once government regulations are met, materials can be applied to agricultural lands. Culture-based methods are used to enumerate pathogen indicator microorganisms but may underestimate cell densities, which is partly due to bacteria existing in a viable but non-culturable physiological state. Viable indicators can also be quantified by realtime polymerase chain reaction (qPCR) used with propidium monoazide (PMA), a dye that inhibits amplification of DNA found extracellularly or in dead cells. The objectives of this study were to test an optimized PMA-qPCR method for viable pathogen detection in wastewater solids and to validate it by comparing results to data obtained by conventional plating. Reporter genes from genetically marked Pseudomonas sp. UG14Lr and Agrobacterium tumefaciens 542 cells were spiked into samples of primary sludge, and anaerobically digested and Lystek-treated biosolids as cell-free DNA, dead cells, viable cells, and mixtures of live and dead cells, followed by DNA extraction with and without PMA, and qPCR. The protocol was then used for Escherichia coli quantification in the three matrices, and results compared to plate counts. PMA-qPCR selectively detected viable cells, while inhibiting signals from cell-free DNA and DNA found in membrane-compromised cells. PMA-qPCR detected 0.5-1 log unit more viable E. coli cells in both primary solids and dewatered biosolids than plate counts. No viable E. coli was found in Lystek-treated biosolids. These data suggest PMA-qPCR may more accurately estimate pathogen cell numbers than traditional culture methods.

  17. Oil Reservoir Production Optimization using Optimal Control

    DEFF Research Database (Denmark)

    Völcker, Carsten; Jørgensen, John Bagterp; Stenby, Erling Halfdan

    2011-01-01

    Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using the adjo......Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using...... the adjoint method. We use an Explicit Singly Diagonally Implicit Runge-Kutta (ESDIRK) method for the integration and a quasi-Newton Sequential Quadratic Programming (SQP) algorithm for the constrained optimization. We use this algorithm in a numerical case study to optimize the production of oil from an oil...... reservoir using water ooding and smart well technology. Compared to the uncontrolled case, the optimal operation increases the Net Present Value of the oil field by 10%....

  18. Optimization with PDE constraints

    CERN Document Server

    Pinnau, Rene

    2008-01-01

    Presents an introduction of pde constrained optimization. This book provides a precise functional analytic treatment via optimality conditions and a non-smooth algorithmical framework. It also presents structure-exploiting discrete concepts and large scale, practically relevant applications.

  19. Optimal Alarm Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — An optimal alarm system is simply an optimal level-crossing predictor that can be designed to elicit the fewest false alarms for a fixed detection probability. It...

  20. Path Optimization Using APSO

    Directory of Open Access Journals (Sweden)

    Deepak Goyal

    2013-07-01

    Full Text Available This paper addresses the malicious node detection and path optimization problem for wireless sensor networks. Malicious node detection in neighborhood is a needed because that node may cause incorrect decisions or energy depletion. In this paper APSO (combination of Artificial bee colony and particular swarm optimization is used to choose an optimized path. Through this improved version we will overcome the disadvantage of local optimal which comes when we use PSO approach.

  1. Optimization techniques in statistics

    CERN Document Server

    Rustagi, Jagdish S

    1994-01-01

    Statistics help guide us to optimal decisions under uncertainty. A large variety of statistical problems are essentially solutions to optimization problems. The mathematical techniques of optimization are fundamentalto statistical theory and practice. In this book, Jagdish Rustagi provides full-spectrum coverage of these methods, ranging from classical optimization and Lagrange multipliers, to numerical techniques using gradients or direct search, to linear, nonlinear, and dynamic programming using the Kuhn-Tucker conditions or the Pontryagin maximal principle. Variational methods and optimiza

  2. Pseudolinear functions and optimization

    CERN Document Server

    Mishra, Shashi Kant

    2015-01-01

    Pseudolinear Functions and Optimization is the first book to focus exclusively on pseudolinear functions, a class of generalized convex functions. It discusses the properties, characterizations, and applications of pseudolinear functions in nonlinear optimization problems.The book describes the characterizations of solution sets of various optimization problems. It examines multiobjective pseudolinear, multiobjective fractional pseudolinear, static minmax pseudolinear, and static minmax fractional pseudolinear optimization problems and their results. The authors extend these results to locally

  3. Optimization algorithms and applications

    CERN Document Server

    Arora, Rajesh Kumar

    2015-01-01

    Choose the Correct Solution Method for Your Optimization ProblemOptimization: Algorithms and Applications presents a variety of solution techniques for optimization problems, emphasizing concepts rather than rigorous mathematical details and proofs. The book covers both gradient and stochastic methods as solution techniques for unconstrained and constrained optimization problems. It discusses the conjugate gradient method, Broyden-Fletcher-Goldfarb-Shanno algorithm, Powell method, penalty function, augmented Lagrange multiplier method, sequential quadratic programming, method of feasible direc

  4. Strategic Airlift Assets Optimization Model

    Science.gov (United States)

    1994-09-01

    AIRLIFT USING RMIP FROM LINE 1218 MODEL STATISTICS BLOCKS OF EQUATIONS 13 SINGLE EQUATIONS 6349 BLOCKS OF VARIABLES 10 SINGLE VARIABLES 8723 NON ZERO...COMPILATION 44.700 EXECUTION 0.090 CLOSEDOWN 45.480 TCTAL SECONDS Solution Report SOLVE AIRLIFT USING RMIP FROM LINE 1218 SOLVE SUMMARY MODEL AIRLIFT...OBJECIIVE Z TYPE RMIP DIRECTION MINIMIZE SOLVER OSL FROM LINE 1218 SOLVER STATUS 1 NORMAL COMPLETION * MODEL STATUS 1 OPTIMAL OBJECTIVE VALUE 37.0139

  5. Optimal obstacle control problem

    Institute of Scientific and Technical Information of China (English)

    ZHU Li; LI Xiu-hua; GUO Xing-ming

    2008-01-01

    In the paper we discuss some properties of the state operators of the optimal obstacle control problem for elliptic variational inequality. Existence, uniqueness and regularity of the optimal control problem are established. In addition, the approximation of the optimal obstacle problem is also studied.

  6. Symmetries in Optimal Control

    NARCIS (Netherlands)

    Schaft, A.J. van der

    1987-01-01

    It is argued that the existence of symmetries may simplify, as in classical mechanics, the solution of optimal control problems. A procedure for obtaining symmetries for the optimal Hamiltonian resulting from the Maximum Principle is given; this avoids the actual calculation of the optimal

  7. The expanded invasive weed optimization metaheuristic for solving continuous and discrete optimization problems.

    Science.gov (United States)

    Josiński, Henryk; Kostrzewa, Daniel; Michalczuk, Agnieszka; Switoński, Adam

    2014-01-01

    This paper introduces an expanded version of the Invasive Weed Optimization algorithm (exIWO) distinguished by the hybrid strategy of the search space exploration proposed by the authors. The algorithm is evaluated by solving three well-known optimization problems: minimization of numerical functions, feature selection, and the Mona Lisa TSP Challenge as one of the instances of the traveling salesman problem. The achieved results are compared with analogous outcomes produced by other optimization methods reported in the literature.

  8. The Expanded Invasive Weed Optimization Metaheuristic for Solving Continuous and Discrete Optimization Problems

    Directory of Open Access Journals (Sweden)

    Henryk Josiński

    2014-01-01

    Full Text Available This paper introduces an expanded version of the Invasive Weed Optimization algorithm (exIWO distinguished by the hybrid strategy of the search space exploration proposed by the authors. The algorithm is evaluated by solving three well-known optimization problems: minimization of numerical functions, feature selection, and the Mona Lisa TSP Challenge as one of the instances of the traveling salesman problem. The achieved results are compared with analogous outcomes produced by other optimization methods reported in the literature.

  9. Optimization and optimal control in automotive systems

    CERN Document Server

    Kolmanovsky, Ilya; Steinbuch, Maarten; Re, Luigi

    2014-01-01

    This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier  approaches, based on some degree of heuristics, to the use of  more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applie...

  10. Particle Swarm Optimization Based Reactive Power Optimization

    CERN Document Server

    Sujin, P R; Linda, M Mary

    2010-01-01

    Reactive power plays an important role in supporting the real power transfer by maintaining voltage stability and system reliability. It is a critical element for a transmission operator to ensure the reliability of an electric system while minimizing the cost associated with it. The traditional objectives of reactive power dispatch are focused on the technical side of reactive support such as minimization of transmission losses. Reactive power cost compensation to a generator is based on the incurred cost of its reactive power contribution less the cost of its obligation to support the active power delivery. In this paper an efficient Particle Swarm Optimization (PSO) based reactive power optimization approach is presented. The optimal reactive power dispatch problem is a nonlinear optimization problem with several constraints. The objective of the proposed PSO is to minimize the total support cost from generators and reactive compensators. It is achieved by maintaining the whole system power loss as minimum...

  11. Concepts of combinatorial optimization

    CERN Document Server

    Paschos, Vangelis Th

    2014-01-01

    Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management.  The three volumes of the Combinatorial Optimization series aim to cover a wide range  of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization.Concepts of Combinatorial Optimization, is divided into three parts:- On the complexity of combinatorial optimization problems, presenting basics about worst-case and randomi

  12. Introduction to Continuous Optimization

    DEFF Research Database (Denmark)

    Andreasson, Niclas; Evgrafov, Anton; Patriksson, Michael

    optimal solutions for continuous optimization models. The main part of the mathematical material therefore concerns the analysis and linear algebra that underlie the workings of convexity and duality, and necessary/sufficient local/global optimality conditions for continuous optimization problems. Natural...... algorithms are then developed from these optimality conditions, and their most important convergence characteristics are analyzed. The book answers many more questions of the form “Why?” and “Why not?” than “How?”. We use only elementary mathematics in the development of the book, yet are rigorous throughout...

  13. Optimization theory with applications

    CERN Document Server

    Pierre, Donald A

    1987-01-01

    Optimization principles are of undisputed importance in modern design and system operation. They can be used for many purposes: optimal design of systems, optimal operation of systems, determination of performance limitations of systems, or simply the solution of sets of equations. While most books on optimization are limited to essentially one approach, this volume offers a broad spectrum of approaches, with emphasis on basic techniques from both classical and modern work.After an introductory chapter introducing those system concepts that prevail throughout optimization problems of all typ

  14. Particle Swarm Optimization

    Science.gov (United States)

    Venter, Gerhard; Sobieszczanski-Sobieski Jaroslaw

    2002-01-01

    The purpose of this paper is to show how the search algorithm known as particle swarm optimization performs. Here, particle swarm optimization is applied to structural design problems, but the method has a much wider range of possible applications. The paper's new contributions are improvements to the particle swarm optimization algorithm and conclusions and recommendations as to the utility of the algorithm, Results of numerical experiments for both continuous and discrete applications are presented in the paper. The results indicate that the particle swarm optimization algorithm does locate the constrained minimum design in continuous applications with very good precision, albeit at a much higher computational cost than that of a typical gradient based optimizer. However, the true potential of particle swarm optimization is primarily in applications with discrete and/or discontinuous functions and variables. Additionally, particle swarm optimization has the potential of efficient computation with very large numbers of concurrently operating processors.

  15. Integrated controls design optimization

    Science.gov (United States)

    Lou, Xinsheng; Neuschaefer, Carl H.

    2015-09-01

    A control system (207) for optimizing a chemical looping process of a power plant includes an optimizer (420), an income algorithm (230) and a cost algorithm (225) and a chemical looping process models. The process models are used to predict the process outputs from process input variables. Some of the process in puts and output variables are related to the income of the plant; and some others are related to the cost of the plant operations. The income algorithm (230) provides an income input to the optimizer (420) based on a plurality of input parameters (215) of the power plant. The cost algorithm (225) provides a cost input to the optimizer (420) based on a plurality of output parameters (220) of the power plant. The optimizer (420) determines an optimized operating parameter solution based on at least one of the income input and the cost input, and supplies the optimized operating parameter solution to the power plant.

  16. Evolutionary constrained optimization

    CERN Document Server

    Deb, Kalyanmoy

    2015-01-01

    This book makes available a self-contained collection of modern research addressing the general constrained optimization problems using evolutionary algorithms. Broadly the topics covered include constraint handling for single and multi-objective optimizations; penalty function based methodology; multi-objective based methodology; new constraint handling mechanism; hybrid methodology; scaling issues in constrained optimization; design of scalable test problems; parameter adaptation in constrained optimization; handling of integer, discrete and mix variables in addition to continuous variables; application of constraint handling techniques to real-world problems; and constrained optimization in dynamic environment. There is also a separate chapter on hybrid optimization, which is gaining lots of popularity nowadays due to its capability of bridging the gap between evolutionary and classical optimization. The material in the book is useful to researchers, novice, and experts alike. The book will also be useful...

  17. Interactive Topology Optimization

    DEFF Research Database (Denmark)

    Nobel-Jørgensen, Morten

    software where the users are assumed to be well-educated both in the finite element method and topology optimization. This dissertation describes how various topology optimization methods have been used for creating cross-platform applications with high performance. The user interface design is based......Interactivity is the continuous interaction between the user and the application to solve a task. Topology optimization is the optimization of structures in order to improve stiffness or other objectives. The goal of the thesis is to explore how topology optimization can be used in applications...... in an interactive and intuitive way. By creating such applications with an intuitive and simple user interface we allow non-engineers like designers and architects to easily experiment with boundary conditions, design domains and other optimization settings. This is in contrast to commercial topology optimization...

  18. Optimization approach to LED crop illumination inside a controlled ecological life support system

    Science.gov (United States)

    Avercheva, Olga; Berkovich, Yuliy A.; Bassarskaya, Elizaveta; Zhigalova, Tatiana; Smolyanina, Svetlana O.; Kochetova, Galina; Konovalova, Irina

    Artificial lighting sources for growing plants can be efficiently used to control gas exchange and preserve the necessary closure of internal matter turnover in the atmosphere of a controlled ecological life support system (CELSS). However, the lighting sources contribute strongly to the equivalent mass of a CELSS. Thus, the choice of an optimal plant lighting regime largely determines the efficiency of the artificial ecosystem. Lighting systems based on light-emitting diodes (LEDs) are now considered the most promising for space applications (Massa et al., 2006). Many types of LEDs have been developed in recent years. Because of this, the problem of optimizing a lighting source for space vegetation chambers has become more difficult: we need to optimize more parameters (such as emission spectrum, light intensity, frequency of light pulses and the shape of the lighting field inside a vegetation chamber), and in a wider range of values. In this presentation we discuss approaches to optimizing the emission spectrum of a lighting source for the use in space applications, including CELSS. One of the benefits of LEDs is their narrow-band emission spectrum, which allows us to construct a lighting source with an optimal spectrum for plant growth and production. A number of experiments have shown that the reaction of plants to a narrow-band emission spectrum of LEDs is highly species-specific and affects many processes in plants. Adding a small amount of far red light to red and blue quanta increased biomass in radish and lettuce (Tamulaitis et al., 2005). Adding blue and near UV light of different wavelengths to red light decreased total sugar content in lettuce (Urbonavičiūtė et al., 2007) and Chinese cabbage (Avercheva et al., 2009). Supplemental green light improved the nutrition quality of some lettuce varieties: decreased nitrate content and increased ascorbic acid content (Samuoliene et al., 2012). It has also been shown that changes in lighting spectrum can lead

  19. Indoor climate optimization with limited resources

    DEFF Research Database (Denmark)

    Santos, A.; Gunnarsen, Lars Bo

    This report presents experimental data and models for optimisation of the indoor climate parameters temperature, noise, draught and window opening. Results are based on experiments with human subjects performed in climate chambers at University of the Philippines. The report may assist building...... designers to balance attention and resources between the parameters of the indoor climate when resources are less than optimal....

  20. Dispositional Optimism and Therapeutic Expectations in Early Phase Oncology Trials

    Science.gov (United States)

    Jansen, Lynn A.; Mahadevan, Daruka; Appelbaum, Paul S.; Klein, William MP; Weinstein, Neil D.; Mori, Motomi; Daffé, Racky; Sulmasy, Daniel P.

    2016-01-01

    Purpose Prior research has identified unrealistic optimism as a bias that might impair informed consent among patient-subjects in early phase oncology trials. Optimism, however, is not a unitary construct – it can also be defined as a general disposition, or what is called dispositional optimism. We assessed whether dispositional optimism would be related to high expectations for personal therapeutic benefit reported by patient-subjects in these trials but not to the therapeutic misconception. We also assessed how dispositional optimism related to unrealistic optimism. Methods Patient-subjects completed questionnaires designed to measure expectations for therapeutic benefit, dispositional optimism, unrealistic optimism, and the therapeutic misconception. Results Dispositional optimism was significantly associated with higher expectations for personal therapeutic benefit (Spearman r=0.333, poptimism was weakly associated with unrealistic optimism (Spearman r=0.215, p=0.005). In multivariate analysis, both dispositional optimism (p=0.02) and unrealistic optimism (poptimism (p=.0001), but not dispositional optimism, was independently associated with the therapeutic misconception. Conclusion High expectations for therapeutic benefit among patient-subjects in early phase oncology trials should not be assumed to result from misunderstanding of specific information about the trials. Our data reveal that these expectations are associated with either a dispositionally positive outlook on life or biased expectations about specific aspects of trial participation. Not all manifestations of optimism are the same, and different types of optimism likely have different consequences for informed consent in early phase oncology research. PMID:26882017

  1. Optimizing Information Credibility in Social Swarming Applications

    CERN Document Server

    Liu, Bin; Bar-Noyz, Amotz; Govindan, Ramesh; Neely, Michael J

    2010-01-01

    With the advent of smartphone technology, it has become possible to conceive of entirely new classes of applications. Social swarming, in which users armed with smartphones are directed by a central director to report on events in the physical world, has several real-world applications: search and rescue, coordinated fire-fighting, and the DARPA balloon hunt challenge. In this paper, we focus on the following problem: how does the director optimize the selection of reporters to deliver credible corroborating information about an event. We first propose a model, based on common intuitions of believability, about the credibility of information. We then cast the problem posed above as a discrete optimization problem, and introduce optimal centralized solutions and an approximate solution amenable to decentralized implementation whose performance is about 20% off on average from the optimal (on real-world datasets derived from Google News) while being 3 orders of magnitude more computationally efficient. More int...

  2. On Validating Boolean Optimizers

    CERN Document Server

    Morgado, Antonio

    2011-01-01

    Boolean optimization finds a wide range of application domains, that motivated a number of different organizations of Boolean optimizers since the mid 90s. Some of the most successful approaches are based on iterative calls to an NP oracle, using either linear search, binary search or the identification of unsatisfiable sub-formulas. The increasing use of Boolean optimizers in practical settings raises the question of confidence in computed results. For example, the issue of confidence is paramount in safety critical settings. One way of increasing the confidence of the results computed by Boolean optimizers is to develop techniques for validating the results. Recent work studied the validation of Boolean optimizers based on branch-and-bound search. This paper complements existing work, and develops methods for validating Boolean optimizers that are based on iterative calls to an NP oracle. This entails implementing solutions for validating both satisfiable and unsatisfiable answers from the NP oracle. The wo...

  3. Workshop on Computational Optimization

    CERN Document Server

    2015-01-01

    Our everyday life is unthinkable without optimization. We try to minimize our effort and to maximize the achieved profit. Many real world and industrial problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks. This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2013. It presents recent advances in computational optimization. The volume includes important real life problems like parameter settings for controlling processes in bioreactor, resource constrained project scheduling, problems arising in transport services, error correcting codes, optimal system performance and energy consumption and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others.

  4. Real-Time Game Adaptation for Optimizing Player Satisfaction

    DEFF Research Database (Denmark)

    Yannakakis, Georgios; Hallam, John

    2009-01-01

    A methodology for optimizing player satisfaction in games on the "playware" physical interactive platform is demonstrated in this paper. Previously constructed artificial neural network user models, reported in the literature, map individual playing characteristics to reported entertainment...

  5. Homotopy optimization methods for global optimization.

    Energy Technology Data Exchange (ETDEWEB)

    Dunlavy, Daniel M.; O' Leary, Dianne P. (University of Maryland, College Park, MD)

    2005-12-01

    We define a new method for global optimization, the Homotopy Optimization Method (HOM). This method differs from previous homotopy and continuation methods in that its aim is to find a minimizer for each of a set of values of the homotopy parameter, rather than to follow a path of minimizers. We define a second method, called HOPE, by allowing HOM to follow an ensemble of points obtained by perturbation of previous ones. We relate this new method to standard methods such as simulated annealing and show under what circumstances it is superior. We present results of extensive numerical experiments demonstrating performance of HOM and HOPE.

  6. Optimization and approximation

    CERN Document Server

    Pedregal, Pablo

    2017-01-01

    This book provides a basic, initial resource, introducing science and engineering students to the field of optimization. It covers three main areas: mathematical programming, calculus of variations and optimal control, highlighting the ideas and concepts and offering insights into the importance of optimality conditions in each area. It also systematically presents affordable approximation methods. Exercises at various levels have been included to support the learning process.

  7. Topology optimized microbioreactors

    DEFF Research Database (Denmark)

    Schäpper, Daniel; Lencastre Fernandes, Rita; Eliasson Lantz, Anna

    2011-01-01

    . Topology optimization is then used to change the spatial distribution of cells in the reactor in order to optimize for maximal product flow out of the reactor. This distribution accounts for potentially negative effects of, for example, by-product inhibition. We show that the theoretical improvement...... in productivity is at least fivefold compared with the homogeneous reactor. The improvements obtained by applying topology optimization are largest where either nutrition is scarce or inhibition effects are pronounced....

  8. Topics in Nonconvex Optimization

    CERN Document Server

    Mishra, Shashi Kant

    2011-01-01

    Nonconvex Optimization is a multi-disciplinary research field that deals with the characterization and computation of local/global minima/maxima of nonlinear, nonconvex, nonsmooth, discrete and continuous functions. Nonconvex optimization problems are frequently encountered in modeling real world systems for a very broad range of applications including engineering, mathematical economics, management science, financial engineering, and social science. This contributed volume consists of selected contributions from the Advanced Training Programme on Nonconvex Optimization and Its Applications he

  9. POSTDOC : THE HUMAN OPTIMIZATION

    OpenAIRE

    Satish Gajawada

    2013-01-01

    This paper is dedicated to everyone who is interested in the Artificial Intelligence. John Henry Holland proposed Genetic Algorithm in the early 1970s. Ant Colony Optimization was proposed by Marco Dorigo in 1992. Particle Swarm Optimization was introduced by Kennedy and Eberhart in 1995. Storn and Price introduced Differential Evolution in 1996. K.M. Passino introduced Bacterial Foraging Optimization Algorithm in 2002. In 2003, X.L. Li proposed Artificial Fish Swarm Algorithm....

  10. Aurora final report

    Energy Technology Data Exchange (ETDEWEB)

    Robert, Dross; Amedeo, Conti

    2013-12-06

    Final Technical report detailing the work done by Nuvera and its partners to fulfill the goals of the program "Transport Studies Enabling Efficiency Optimization of Cost-Competitive Fuel Cell Stacks" (a.k.a. AURORA)

  11. Optimized absorption imaging of mesoscopic atomic clouds

    Science.gov (United States)

    Muessel, Wolfgang; Strobel, Helmut; Joos, Maxime; Nicklas, Eike; Stroescu, Ion; Tomkovič, Jiří; Hume, David B.; Oberthaler, Markus K.

    2013-10-01

    We report on the optimization of high-intensity absorption imaging for small Bose-Einstein condensates. The imaging calibration exploits the linear scaling of the quantum projection noise with the mean number of atoms for a coherent spin state. After optimization for atomic clouds containing up to 300 atoms, we find an atom number resolution of atoms, mainly limited by photon shot noise and radiation pressure.

  12. The Merlin Control Language for strategic optimization

    Science.gov (United States)

    Papageorgiou, D. G.; Demetropoulos, I. N.; Lagaris, I. E.

    1998-04-01

    MCL is the programming language of the MERLIN optimization environment. It can be used for the implementation of efficient optimization strategies, abolishing to a great extend the need for user intervention. The language is simple to learn and its structure is similar to Fortran. We report on successful applications where MCL played an instrumental role, as for example in molecular physics problems and in the training of neural networks.

  13. Optimization : insights and applications

    CERN Document Server

    Brinkhuis, Jan

    2005-01-01

    This self-contained textbook is an informal introduction to optimization through the use of numerous illustrations and applications. The focus is on analytically solving optimization problems with a finite number of continuous variables. In addition, the authors provide introductions to classical and modern numerical methods of optimization and to dynamic optimization. The book's overarching point is that most problems may be solved by the direct application of the theorems of Fermat, Lagrange, and Weierstrass. The authors show how the intuition for each of the theoretical results can be s

  14. Integer and combinatorial optimization

    CERN Document Server

    Nemhauser, George L

    1999-01-01

    Rave reviews for INTEGER AND COMBINATORIAL OPTIMIZATION ""This book provides an excellent introduction and survey of traditional fields of combinatorial optimization . . . It is indeed one of the best and most complete texts on combinatorial optimization . . . available. [And] with more than 700 entries, [it] has quite an exhaustive reference list.""-Optima ""A unifying approach to optimization problems is to formulate them like linear programming problems, while restricting some or all of the variables to the integers. This book is an encyclopedic resource for such f

  15. Sequential stochastic optimization

    CERN Document Server

    Cairoli, Renzo

    1996-01-01

    Sequential Stochastic Optimization provides mathematicians and applied researchers with a well-developed framework in which stochastic optimization problems can be formulated and solved. Offering much material that is either new or has never before appeared in book form, it lucidly presents a unified theory of optimal stopping and optimal sequential control of stochastic processes. This book has been carefully organized so that little prior knowledge of the subject is assumed; its only prerequisites are a standard graduate course in probability theory and some familiarity with discrete-paramet

  16. Optimization under Uncertainty

    KAUST Repository

    Lopez, Rafael H.

    2016-01-06

    The goal of this poster is to present the main approaches to optimization of engineering systems in the presence of uncertainties. We begin by giving an insight about robust optimization. Next, we detail how to deal with probabilistic constraints in optimization, the so called the reliability based design. Subsequently, we present the risk optimization approach, which includes the expected costs of failure in the objective function. After that the basic description of each approach is given, the projects developed by CORE are presented. Finally, the main current topic of research of CORE is described.

  17. Control and optimization system

    Science.gov (United States)

    Xinsheng, Lou

    2013-02-12

    A system for optimizing a power plant includes a chemical loop having an input for receiving an input parameter (270) and an output for outputting an output parameter (280), a control system operably connected to the chemical loop and having a multiple controller part (230) comprising a model-free controller. The control system receives the output parameter (280), optimizes the input parameter (270) based on the received output parameter (280), and outputs an optimized input parameter (270) to the input of the chemical loop to control a process of the chemical loop in an optimized manner.

  18. MULTIDISCIPLINARY ROBUST OPTIMIZATION DESIGN

    Institute of Scientific and Technical Information of China (English)

    Chen Jianjiang; Xiao Renbin; Zhong Yifang; Dou Gang

    2005-01-01

    Because uncertainty factors inevitably exist under multidisciplinary design environment, a hierarchical multidisciplinary robust optimization design based on response surface is proposed. The method constructs optimization model of subsystem level and system level to coordinate the coupling among subsystems, and also the response surface based on the artificial neural network is introduced to provide information for system level optimization tool to maintain the independence of subsystems,i.e. to realize multidisciplinary parallel design. The application case of electrical packaging demonstrates that reasonable robust optimum solution can be yielded and it is a potential and efficient multidisciplinary robust optimization approach.

  19. Optimal Recurrence Grammars

    CERN Document Server

    Graben, Peter beim; Fröhlich, Flavio

    2015-01-01

    We optimally estimate the recurrence structure of a multivariate time series by Markov chains obtained from recurrence grammars. The goodness of fit is assessed with a utility function derived from the stochastic Markov transition matrix. It assumes a local maximum for the distance threshold of the optimal recurrence grammar. We validate our approach by means of the nonlinear Lorenz system and its linearized stochastic surrogates. Finally we apply our optimization procedure to the segmentation of neurophysiological time series obtained from anesthetized animals. We propose the number of optimal recurrence domains as a statistic for classifying an animals' state of consciousness.

  20. OPTIMAL DELAUNAY TRIANGULATIONS

    Institute of Scientific and Technical Information of China (English)

    Long Chen; Jin-chao Xu

    2004-01-01

    The Delaunay triangulation, in both classic and more generalized sense, is studied in this paper for minimizing the linear interpolation error (measure in Lp-norm) for a given function. The classic Delaunay triangulation can then be characterized as an optimal triangulation that minimizes the interpolation error for the isotropic function ‖x‖2 among all the triangulations with a given set of vertices. For a more general function, a functiondependent Delaunay triangulation is then defined to be an optimal triangulation that minimizes the interpolation error for this .function and its construction can be obtained by a simple lifting and projection procedure.The optimal Delaunay triangulation is the one that minimizes the interpolation error among all triangulations with the same number of vertices, i.e. the distribution of vertices are optimized in order to minimize the interpolation error. Such a function-dependent optimal Delaunay triangulation is proved to exist for any given convex continuous function.On an optimal Delaunay triangulation associated with f, it is proved that ▽f at the interior vertices can be exactly recovered by the function values on its neighboring vertices.Since the optimal Delaunay triangulation is difficult to obtain in practice, the concept of nearly optimal triangulation is introduced and two sufficient conditions are presented for a triangulation to be nearly optimal.

  1. Stochastic optimization methods

    CERN Document Server

    Marti, Kurt

    2008-01-01

    Optimization problems arising in practice involve random model parameters. This book features many illustrations, several examples, and applications to concrete problems from engineering and operations research.

  2. Optimization strategies for complex engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Eldred, M.S.

    1998-02-01

    LDRD research activities have focused on increasing the robustness and efficiency of optimization studies for computationally complex engineering problems. Engineering applications can be characterized by extreme computational expense, lack of gradient information, discrete parameters, non-converging simulations, and nonsmooth, multimodal, and discontinuous response variations. Guided by these challenges, the LDRD research activities have developed application-specific techniques, fundamental optimization algorithms, multilevel hybrid and sequential approximate optimization strategies, parallel processing approaches, and automatic differentiation and adjoint augmentation methods. This report surveys these activities and summarizes the key findings and recommendations.

  3. Optimally Training a Cascade Classifier

    CERN Document Server

    Shen, Chunhua; Hengel, Anton van den

    2010-01-01

    Cascade classifiers are widely used in real-time object detection. Different from conventional classifiers that are designed for a low overall classification error rate, a classifier in each node of the cascade is required to achieve an extremely high detection rate and moderate false positive rate. Although there are a few reported methods addressing this requirement in the context of object detection, there is no a principled feature selection method that explicitly takes into account this asymmetric node learning objective. We provide such an algorithm here. We show a special case of the biased minimax probability machine has the same formulation as the linear asymmetric classifier (LAC) of \\cite{wu2005linear}. We then design a new boosting algorithm that directly optimizes the cost function of LAC. The resulting totally-corrective boosting algorithm is implemented by the column generation technique in convex optimization. Experimental results on object detection verify the effectiveness of the proposed bo...

  4. Optimal Aging and Death

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Strulik, Holger

    2010-01-01

    This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...

  5. Optimization in power systems

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Geraldo R.M. da [Sao Paulo Univ., Sao Carlos, SP (Brazil). Escola de Engenharia

    1994-12-31

    This paper discusses, partially, the advantages and the disadvantages of the optimal power flow. It shows some of the difficulties of implementation and proposes solutions. An analysis is made comparing the power flow, BIGPOWER/CESP, and the optimal power flow, FPO/SEL, developed by the author, when applied to the CEPEL-ELETRONORTE and CESP systems. (author) 8 refs., 5 tabs.

  6. 用项目反应理论分析自陈量表时最佳模型的选择%Choice of optimal item response model for analysis of self-report questionnaire

    Institute of Scientific and Technical Information of China (English)

    周晶; 郭庆科

    2005-01-01

    评分时,其测量精度要好于2级评分,如果合并选择项,则测量精度下降.%BACKGROUND: Item response theory (IRT) is widely used in the westem world, but its use for non-cognitive measurement has been very limited in China. It is necessary to explore whether IRT is applicable in non-cognitive settings and find the optimal model.OBJECTIVE: To find the optimal IRT model for self-report questionnaire analysis with the instance of emotional competence scale (ECS) and compare the effectiveness of different models in light of model data fitting and the volume of information provision.DESIGN: A comparative study of different psychometric models tested with the same data set.SETTING: Shandong Laiwu Vocational and Technical College; Department of Psychology, Liaoning Normal University.PARTICIPANTS: Totally 617 college students of Shandong Normal University (311 males and 306 females)and 564 senior high school students of the 17 Laiwu High School (283 males and 281females) participated in the study during May 2004.METHODS: Emotional competence scale (ECS) was adopted for psychometric measurement for 5-point Likert-type items. The scale was divided into 9 subscales, namely impulse control, empathy, persistency, interpersonal intimacy, social skills, emotional regulation, emotional stability, sense of responsibility, and self-confidence. One-parameter, two-parameter and three-parameter logistic model and grade response model were used for analysis of the 9 subscales, followed by goodness of fit test (analogous to Chi-square test) and comparison of the measurement precision (reliability)of the three models.MAIN OUTCOME MEASURES: Log-likelihood ratio, average χ2 statistics and average volume of information when one-parameter, two-parameter and three-parameter Logistic model.RESULTS: Totally 1 220 questionnaires were handed out and 1 181 with valid answers were obtained. Comparison of the 3 logistic model showed that the two-parameter logistic model had the least

  7. Overall bolt stress optimization

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard

    2013-01-01

    The state of stress in bolts and nuts with International Organization for Standardization metric thread design is examined and optimized. The assumed failure mode is fatigue, so the applied preload and the load amplitude together with the stress concentrations define the connection strength....... Maximum stress in the bolt is found at the fillet under the head, at the thread start, or at the thread root. To minimize the stress concentration, shape optimization is applied. Nut shape optimization also has a positive effect on the maximum stress. The optimization results show that designing a nut......, which results in a more evenly distribution of load along the engaged thread, has a limited influence on the maximum stress due to the stress concentration at the first thread root. To further reduce the maximum stress, the transition from bolt shank to the thread must be optimized. Stress reduction...

  8. Optimized manufacturable porous materials

    DEFF Research Database (Denmark)

    Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

    Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...

  9. Workshop on Computational Optimization

    CERN Document Server

    2016-01-01

    This volume is a comprehensive collection of extended contributions from the Workshop on Computational Optimization 2014, held at Warsaw, Poland, September 7-10, 2014. The book presents recent advances in computational optimization. The volume includes important real problems like parameter settings for controlling processes in bioreactor and other processes, resource constrained project scheduling, infection distribution, molecule distance geometry, quantum computing, real-time management and optimal control, bin packing, medical image processing, localization the abrupt atmospheric contamination source and so on. It shows how to develop algorithms for them based on new metaheuristic methods like evolutionary computation, ant colony optimization, constrain programming and others. This research demonstrates how some real-world problems arising in engineering, economics, medicine and other domains can be formulated as optimization tasks.

  10. Bacterial Colony Optimization

    Directory of Open Access Journals (Sweden)

    Ben Niu

    2012-01-01

    Full Text Available This paper investigates the behaviors at different developmental stages in Escherichia coli (E. coli lifecycle and developing a new biologically inspired optimization algorithm named bacterial colony optimization (BCO. BCO is based on a lifecycle model that simulates some typical behaviors of E. coli bacteria during their whole lifecycle, including chemotaxis, communication, elimination, reproduction, and migration. A newly created chemotaxis strategy combined with communication mechanism is developed to simplify the bacterial optimization, which is spread over the whole optimization process. However, the other behaviors such as elimination, reproduction, and migration are implemented only when the given conditions are satisfied. Two types of interactive communication schemas: individuals exchange schema and group exchange schema are designed to improve the optimization efficiency. In the simulation studies, a set of 12 benchmark functions belonging to three classes (unimodal, multimodal, and rotated problems are performed, and the performances of the proposed algorithms are compared with five recent evolutionary algorithms to demonstrate the superiority of BCO.

  11. Hybrid Batch Bayesian Optimization

    CERN Document Server

    Azimi, Javad; Fern, Xiaoli

    2012-01-01

    Bayesian Optimization aims at optimizing an unknown non-convex/concave function that is costly to evaluate. We are interested in application scenarios where concurrent function evaluations are possible. Under such a setting, BO could choose to either sequentially evaluate the function, one input at a time and wait for the output of the function before making the next selection, or evaluate the function at a batch of multiple inputs at once. These two different settings are commonly referred to as the sequential and batch settings of Bayesian Optimization. In general, the sequential setting leads to better optimization performance as each function evaluation is selected with more information, whereas the batch setting has an advantage in terms of the total experimental time (the number of iterations). In this work, our goal is to combine the strength of both settings. Specifically, we systematically analyze Bayesian optimization using Gaussian process as the posterior estimator and provide a hybrid algorithm t...

  12. Optimal periodic control

    CERN Document Server

    Colonius, Fritz

    1988-01-01

    This research monograph deals with optimal periodic control problems for systems governed by ordinary and functional differential equations of retarded type. Particular attention is given to the problem of local properness, i.e. whether system performance can be improved by introducing periodic motions. Using either Ekeland's Variational Principle or optimization theory in Banach spaces, necessary optimality conditions are proved. In particular, complete proofs of second-order conditions are included and the result is used for various versions of the optimal periodic control problem. Furthermore a scenario for local properness (related to Hopf bifurcation) is drawn up, giving hints as to where to look for optimal periodic solutions. The book provides mathematically rigorous proofs for results which are potentially of importance in chemical engineering and aerospace engineering.

  13. Modern optimization with R

    CERN Document Server

    Cortez, Paulo

    2014-01-01

    The goal of this book is to gather in a single document the most relevant concepts related to modern optimization methods, showing how such concepts and methods can be addressed using the open source, multi-platform R tool. Modern optimization methods, also known as metaheuristics, are particularly useful for solving complex problems for which no specialized optimization algorithm has been developed. These methods often yield high quality solutions with a more reasonable use of computational resources (e.g. memory and processing effort). Examples of popular modern methods discussed in this book are: simulated annealing; tabu search; genetic algorithms; differential evolution; and particle swarm optimization. This book is suitable for undergraduate and graduate students in Computer Science, Information Technology, and related areas, as well as data analysts interested in exploring modern optimization methods using R.

  14. SAGD optimization under uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Gossuin, J.; Naccache, P. [Schlumberger SIS, Abingdon (United Kingdom); Bailley, W.; Couet, B. [Schlumberger-Doll Research, Cambridge, MA, (United States)

    2011-07-01

    In the heavy oil industry, the steam assisted gravity drainage process is often used to enhance oil recovery but this is a costly method and ways to make it more efficient are needed. Multiple methods have been developed to optimize the SAGD process but none of them explicitly considered uncertainty. This paper presents an optimization method in the presence of reservoir uncertainty. This process was tested on an SAGD model where three equi-probable geological models are possible. Preparatory steps were first performed to identify key variables and the optimization model was then proposed. The method was shown to be successful in handling a significant number of uncertainties, optimizing the SAGD process and preventing premature steam channels that can choke production. The optimization method presented herein was successfully applied to an SAGD process and was shown to provide better strategies than sensitivity analysis while handling more complex problems.

  15. Hubble Systems Optimize Hospital Schedules

    Science.gov (United States)

    2009-01-01

    Don Rosenthal, a former Ames Research Center computer scientist who helped design the Hubble Space Telescope's scheduling software, co-founded Allocade Inc. of Menlo Park, California, in 2004. Allocade's OnCue software helps hospitals reclaim unused capacity and optimize constantly changing schedules for imaging procedures. After starting to use the software, one medical center soon reported noticeable improvements in efficiency, including a 12 percent increase in procedure volume, 35 percent reduction in staff overtime, and significant reductions in backlog and technician phone time. Allocade now offers versions for outpatient and inpatient magnetic resonance imaging (MRI), ultrasound, interventional radiology, nuclear medicine, Positron Emission Tomography (PET), radiography, radiography-fluoroscopy, and mammography.

  16. Optimization of integrated polarization filters

    CERN Document Server

    Gagnon, Denis; Déziel, Jean-Luc; Dubé, Louis J

    2014-01-01

    This study reports on the design of small footprint, integrated polarization filters based on engineered photonic lattices. Using a rods-in-air lattice as a basis for a TE filter and a holes-in-slab lattice for the analogous TM filter, we are able to maximize the degree of polarization of the output beams up to 98 % with a transmission efficiency greater than 75 %. The proposed designs allow not only for logical polarization filtering, but can also be tailored to output an arbitrary transverse beam profile. The lattice configurations are found using a recently proposed parallel tabu search algorithm for combinatorial optimization problems in integrated photonics.

  17. Global Optimization using Interval Analysis: Interval Optimization for Aerospace Applications

    NARCIS (Netherlands)

    Van Kampen, E.

    2010-01-01

    Optimization is an important element in aerospace related research. It is encountered for example in trajectory optimization problems, such as: satellite formation flying, spacecraft re-entry optimization and airport approach and departure optimization; in control optimization, for example in adapti

  18. Judo Biomechanical Optimization

    CERN Document Server

    Sacripanti, Attilio

    2016-01-01

    In this paper, for the first time, there is comprehensively tackling the problem of biomechanical optimization of a sport of situation such as judo. Starting from the optimization of more simple sports, optimization of this kind of complex sports is grounded on a general physics tool such as the analysis of variation. The objective function is divided for static and dynamic situation of Athletes couple, and it is proposed also a sort of dynamic programming problem Strategic Optimization. A dynamic programming problem is an optimization problem in which decisions have to be taken sequentially over several time periods linked in some fashion. A strategy for a dynamic programming problem is just a contingency plan, a plan that specifies what is to be done at each stage as a function of all that has transpired up to that point. It is possible to demonstrate, under some conditions, that a Markovian optimal strategy is an optimal strategy for the dynamic programming problem under examination. At last we try to appr...

  19. 4th Optimization Day

    CERN Document Server

    Eberhard, Andrew; Ralph, Daniel; Glover, Barney M

    1999-01-01

    Although the monograph Progress in Optimization I: Contributions from Aus­ tralasia grew from the idea of publishing a proceedings of the Fourth Optimiza­ tion Day, held in July 1997 at the Royal Melbourne Institute of Technology, the focus soon changed to a refereed volume in optimization. The intention is to publish a similar book annually, following each Optimization Day. The idea of having an annual Optimization Day was conceived by Barney Glover; the first of these Optimization Days was held in 1994 at the University of Ballarat. Barney hoped that such a yearly event would bring together the many, but widely dispersed, researchers in Australia who were publishing in optimization and related areas such as control. The first Optimization Day event was followed by similar conferences at The University of New South Wales (1995), The University of Melbourne (1996), the Royal Melbourne Institute of Technology (1997), and The University of Western Australia (1998). The 1999 conference will return to Ballarat ...

  20. BEopt-CA (Ex) -- A Tool for Optimal Integration of EE/DR/ES+PV in Existing California Homes. Cooperative Research and Development Final Report, CRADA Number CRD-11-429

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Craig [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-29

    Opportunities for combining energy efficiency, demand response, and energy storage with PV are often missed, because the required knowledge and expertise for these different technologies exist in separate organizations or individuals. Furthermore, there is a lack of quantitative tools to optimize energy efficiency, demand response and energy storage with PV, especially for existing buildings. Our goal is to develop a modeling tool, BEopt-CA (Ex), with capabilities to facilitate identification and implementation of a balanced integration of energy efficiency (EE), demand response (DR), and energy storage (ES) with photovoltaics (PV) within the residential retrofit market. To achieve this goal, we will adapt and extend an existing tool -- BEopt -- that is designed to identify optimal combinations of efficiency and PV in new home designs. In addition, we will develop multifamily residential modeling capabilities for use in California, to facilitate integration of distributed solar power into the grid in order to maximize its value to California ratepayers. The project is follow-on research that leverages previous California Solar Initiative RD&D investment in the BEopt software. BEopt facilitates finding the least cost combination of energy efficiency and renewables to support integrated DSM (iDSM) and Zero Net Energy (ZNE) in California residential buildings. However, BEopt is currently focused on modeling single-family houses and does not include satisfactory capabilities for modeling multifamily homes. The project brings BEopt's existing modeling and optimization capabilities to multifamily buildings, including duplexes, triplexes, townhouses, flats, and low-rise apartment buildings.

  1. Optimal Strategy in Basketball

    CERN Document Server

    Skinner, Brian

    2015-01-01

    This book chapter reviews some of the major principles associated with optimal strategy in basketball. In particular, we consider the principles of allocative efficiency (optimal allocation of shots between offensive options), dynamic efficiency (optimal shot selection in the face of pressure from the shot clock), and the risk/reward tradeoff (strategic manipulation of outcome variance). For each principle, we provide a simple example of a strategic problem and show how it can be described analytically. We then review general analytical results and provide an overview of existing statistical studies. A number of open challenges in basketball analysis are highlighted.

  2. Agent-Based Optimization

    CERN Document Server

    Jędrzejowicz, Piotr; Kacprzyk, Janusz

    2013-01-01

    This volume presents a collection of original research works by leading specialists focusing on novel and promising approaches in which the multi-agent system paradigm is used to support, enhance or replace traditional approaches to solving difficult optimization problems. The editors have invited several well-known specialists to present their solutions, tools, and models falling under the common denominator of the agent-based optimization. The book consists of eight chapters covering examples of application of the multi-agent paradigm and respective customized tools to solve  difficult optimization problems arising in different areas such as machine learning, scheduling, transportation and, more generally, distributed and cooperative problem solving.

  3. Encyclopedia of optimization

    CERN Document Server

    Pardalos, Panos

    2001-01-01

    Optimization problems are widespread in the mathematical modeling of real world systems and their applications arise in all branches of science, applied science and engineering. The goal of the Encyclopedia of Optimization is to introduce the reader to a complete set of topics in order to show the spectrum of recent research activities and the richness of ideas in the development of theories, algorithms and the applications of optimization. It is directed to a diverse audience of students, scientists, engineers, decision makers and problem solvers in academia, business, industry, and government.

  4. Optimal control computer programs

    Science.gov (United States)

    Kuo, F.

    1992-01-01

    The solution of the optimal control problem, even with low order dynamical systems, can usually strain the analytical ability of most engineers. The understanding of this subject matter, therefore, would be greatly enhanced if a software package existed that could simulate simple generic problems. Surprisingly, despite a great abundance of commercially available control software, few, if any, address the part of optimal control in its most generic form. The purpose of this paper is, therefore, to present a simple computer program that will perform simulations of optimal control problems that arise from the first necessary condition and the Pontryagin's maximum principle.

  5. Contingency contractor optimization.

    Energy Technology Data Exchange (ETDEWEB)

    Gearhart, Jared Lee; Adair, Kristin Lynn; Jones, Katherine A.; Bandlow, Alisa; Durfee, Justin David.; Jones, Dean A.; Martin, Nathaniel; Detry, Richard Joseph; Nanco, Alan Stewart; Nozick, Linda Karen

    2013-10-01

    The goal of Phase 3 the OSD ATL Contingency Contractor Optimization (CCO) project is to create an engineering prototype of a tool for the contingency contractor element of total force planning during the Support for Strategic Analysis (SSA). An optimization model was developed to determine the optimal mix of military, Department of Defense (DoD) civilians, and contractors that accomplishes a set of user defined mission requirements at the lowest possible cost while honoring resource limitations and manpower use rules. An additional feature allows the model to understand the variability of the Total Force Mix when there is uncertainty in mission requirements.

  6. Contingency contractor optimization.

    Energy Technology Data Exchange (ETDEWEB)

    Gearhart, Jared Lee; Adair, Kristin Lynn; Jones, Katherine A.; Bandlow, Alisa; Detry, Richard Joseph; Durfee, Justin David.; Jones, Dean A.; Martin, Nathaniel; Nanco, Alan Stewart; Nozick, Linda Karen

    2013-06-01

    The goal of Phase 3 the OSD ATL Contingency Contractor Optimization (CCO) project is to create an engineering prototype of a tool for the contingency contractor element of total force planning during the Support for Strategic Analysis (SSA). An optimization model was developed to determine the optimal mix of military, Department of Defense (DoD) civilians, and contractors that accomplishes a set of user defined mission requirements at the lowest possible cost while honoring resource limitations and manpower use rules. An additional feature allows the model to understand the variability of the Total Force Mix when there is uncertainty in mission requirements.

  7. Estimation of optimal feeding strategies for fed-batch bioprocesses.

    Science.gov (United States)

    Franco-Lara, Ezequiel; Weuster-Botz, Dirk

    2005-07-01

    A generic methodology for feeding strategy optimization is presented. This approach uses a genetic algorithm to search for optimal feeding profiles represented by means of artificial neural networks (ANN). Exemplified on a fed-batch hybridoma cell cultivation, the approach has proven to be able to cope with complex optimization tasks handling intricate constraints and objective functions. Furthermore, the performance of the method is compared with other previously reported standard techniques like: (1) optimal control theory, (2) first order conjugate gradient, (3) dynamical programming, (4) extended evolutionary strategies. The methodology presents no restrictions concerning the number or complexity of the state variables and therefore constitutes a remarkable alternative for process development and optimization.

  8. Optimization of photonic crystal cavities

    DEFF Research Database (Denmark)

    Wang, Fengwen; Sigmund, Ole

    2017-01-01

    We present optimization of photonic crystal cavities. The optimization problem is formulated to maximize the Purcell factor of a photonic crystal cavity. Both topology optimization and air-hole-based shape optimization are utilized for the design process. Numerical results demonstrate...... that the Purcell factor of the photonic crystal cavity can be significantly improved through optimization....

  9. Particle swarm optimization based optimal bidding strategy in an ...

    African Journals Online (AJOL)

    user

    Particle swarm optimization based optimal bidding strategy in an open ... relaxation-based approach for strategic bidding in England-Wales pool type electricity market has ... presents the mathematical formulation of optimal bidding problem.

  10. On Alternative Optimal Solutions to Linear Fractional Optimization Problems

    Institute of Scientific and Technical Information of China (English)

    ShengjiaXue

    2004-01-01

    The structure of the optimal solution set is derived for linear fractional optimization problems with the representation theorem of polyhedral sets.And the computational procedure in determining all optimal solutions is also given.

  11. On Optimal Designs of Some Censoring Schemes

    Directory of Open Access Journals (Sweden)

    Dr. Adnan Mohammad Awad

    2016-03-01

    Full Text Available The main objective of this paper  is to explore suitability of some entropy-information measures for introducing a new optimality censoring criterion and to apply it to some censoring schemes from some underlying life-time models.  In addition, the  paper investigates four related issues namely; the  effect of the parameter of parent distribution on optimal scheme, equivalence of schemes based on Shannon and Awad sup-entropy measures, the conjecture that the optimal scheme is one stage scheme, and  a conjecture by Cramer and Bagh (2011 about Shannon minimum and maximum schemes when parent distribution is reflected power. Guidelines for designing an optimal censoring plane are reported together with theoretical and numerical results and illustrations.

  12. Status of canning cycle optimization study

    Energy Technology Data Exchange (ETDEWEB)

    Hutton, T.W.

    1963-12-23

    A concentrated study of the present manufacturing process was initiated in the Process Engineering Unit, the purpose of the study being to optimize the present operations, procedures, and methods of the AlSi canning process. It is the purpose of this document to report the findings and accomplishments for that portion of the study concerned with the optimization of component preparation and fabrication within the canning furnace. To date, this study has consisted mainly of heating rate studies of the various components used in the fuel element fabrication with some work being done on the optimization of the heating cycle for these components. This work necessarily serves as the basis for further optimization study.

  13. Dynamic stochastic optimization

    CERN Document Server

    Ermoliev, Yuri; Pflug, Georg

    2004-01-01

    Uncertainties and changes are pervasive characteristics of modern systems involving interactions between humans, economics, nature and technology. These systems are often too complex to allow for precise evaluations and, as a result, the lack of proper management (control) may create significant risks. In order to develop robust strategies we need approaches which explic­ itly deal with uncertainties, risks and changing conditions. One rather general approach is to characterize (explicitly or implicitly) uncertainties by objec­ tive or subjective probabilities (measures of confidence or belief). This leads us to stochastic optimization problems which can rarely be solved by using the standard deterministic optimization and optimal control methods. In the stochastic optimization the accent is on problems with a large number of deci­ sion and random variables, and consequently the focus ofattention is directed to efficient solution procedures rather than to (analytical) closed-form solu­ tions. Objective an...

  14. Accelerated Parallel Texture Optimization

    Institute of Scientific and Technical Information of China (English)

    Hao-Da Huang; Xin Tong; Wen-Cheng Wang

    2007-01-01

    Texture optimization is a texture synthesis method that can efficiently reproduce various features of exemplar textures. However, its slow synthesis speed limits its usage in many interactive or real time applications. In this paper, we propose a parallel texture optimization algorithm to run on GPUs. In our algorithm, k-coherence search and principle component analysis (PCA) are used for hardware acceleration, and two acceleration techniques are further developed to speed up our GPU-based texture optimization. With a reasonable precomputation cost, the online synthesis speed of our algorithm is 4000+ times faster than that of the original texture optimization algorithm and thus our algorithm is capable of interactive applications. The advantages of the new scheme are demonstrated by applying it to interactive editing of flow-guided synthesis.

  15. Topology optimized microbioreactors.

    Science.gov (United States)

    Schäpper, Daniel; Lencastre Fernandes, Rita; Lantz, Anna Eliasson; Okkels, Fridolin; Bruus, Henrik; Gernaey, Krist V

    2011-04-01

    This article presents the fusion of two hitherto unrelated fields--microbioreactors and topology optimization. The basis for this study is a rectangular microbioreactor with homogeneously distributed immobilized brewers yeast cells (Saccharomyces cerevisiae) that produce a recombinant protein. Topology optimization is then used to change the spatial distribution of cells in the reactor in order to optimize for maximal product flow out of the reactor. This distribution accounts for potentially negative effects of, for example, by-product inhibition. We show that the theoretical improvement in productivity is at least fivefold compared with the homogeneous reactor. The improvements obtained by applying topology optimization are largest where either nutrition is scarce or inhibition effects are pronounced.

  16. Linearly constrained minimax optimization

    DEFF Research Database (Denmark)

    Madsen, Kaj; Schjær-Jacobsen, Hans

    1978-01-01

    We present an algorithm for nonlinear minimax optimization subject to linear equality and inequality constraints which requires first order partial derivatives. The algorithm is based on successive linear approximations to the functions defining the problem. The resulting linear subproblems...

  17. Cooperative Bacterial Foraging Optimization

    Directory of Open Access Journals (Sweden)

    Hanning Chen

    2009-01-01

    Full Text Available Bacterial Foraging Optimization (BFO is a novel optimization algorithm based on the social foraging behavior of E. coli bacteria. This paper presents a variation on the original BFO algorithm, namely, the Cooperative Bacterial Foraging Optimization (CBFO, which significantly improve the original BFO in solving complex optimization problems. This significant improvement is achieved by applying two cooperative approaches to the original BFO, namely, the serial heterogeneous cooperation on the implicit space decomposition level and the serial heterogeneous cooperation on the hybrid space decomposition level. The experiments compare the performance of two CBFO variants with the original BFO, the standard PSO and a real-coded GA on four widely used benchmark functions. The new method shows a marked improvement in performance over the original BFO and appears to be comparable with the PSO and GA.

  18. Handbook of simulation optimization

    CERN Document Server

    Fu, Michael C

    2014-01-01

    The Handbook of Simulation Optimization presents an overview of the state of the art of simulation optimization, providing a survey of the most well-established approaches for optimizing stochastic simulation models and a sampling of recent research advances in theory and methodology. Leading contributors cover such topics as discrete optimization via simulation, ranking and selection, efficient simulation budget allocation, random search methods, response surface methodology, stochastic gradient estimation, stochastic approximation, sample average approximation, stochastic constraints, variance reduction techniques, model-based stochastic search methods and Markov decision processes. This single volume should serve as a reference for those already in the field and as a means for those new to the field for understanding and applying the main approaches. The intended audience includes researchers, practitioners and graduate students in the business/engineering fields of operations research, management science,...

  19. Group Leaders Optimization Algorithm

    CERN Document Server

    Daskin, Anmer

    2010-01-01

    Complexity of global optimization algorithms makes implementation of the algorithms difficult and leads the algorithms to require more computer resources for the optimization process. The ability to explore the whole solution space without increasing the complexity of algorithms has a great importance to not only get reliable results but so also make the implementation of these algorithms more convenient for higher dimensional and complex-real world problems in science and engineering. In this paper, we present a new global optimization algorithm in which the influence of the leaders in social groups is used as an inspiration for the evolutionary technique that is designed into a group architecture similar to the architecture of Cooperative Coevolutionary Algorithms. Therefore, we present the implementation method and the experimental results for the single and multidimensional optimization test problems and a scientific real world problem, the energies and the geometric structures of Lennard-Jones clusters.

  20. Stochastic optimization methods

    CERN Document Server

    Marti, Kurt

    2005-01-01

    Optimization problems arising in practice involve random parameters. For the computation of robust optimal solutions, i.e., optimal solutions being insensitive with respect to random parameter variations, deterministic substitute problems are needed. Based on the distribution of the random data, and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into deterministic substitute problems. Due to the occurring probabilities and expectations, approximative solution techniques must be applied. Deterministic and stochastic approximation methods and their analytical properties are provided: Taylor expansion, regression and response surface methods, probability inequalities, First Order Reliability Methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation methods, differentiation of probability and mean value functions. Convergence results of the resulting iterative solution procedures are given.

  1. Bolt Thread Stress Optimization

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard

    2012-01-01

    Designs of threaded fasteners are controlled by different standards, and the number of different thread definitions is large. The most commonly used thread is probably the metric ISO thread, and this design is therefore used in this paper. Thread root design controls the stress concentration factor...... of threads and therefore indirectly the bolt fatigue life. The root shape is circular, and from shape optimization for minimum stress concentration it is well known that the circular shape is seldom optimal. An axisymmetric Finite Element (FE) formulation is used to analyze the bolted connection, and a study...... is performed to establish the need for contact modeling with regard to finding the correct stress concentration factor. Optimization is performed with a simple parameterization with two design variables. Stress reduction of up to 9% is found in the optimization process, and some similarities are found...

  2. Bolt Thread Stress Optimization

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard

    2012-01-01

    Designs of threaded fasteners are controlled by different standards, and the number of different thread definitions is large. The most commonly used thread is probably the metric ISO thread, and this design is therefore used in this paper. Thread root design controls the stress concentration factor...... of threads and therefore indirectly the bolt fatigue life. The root shape is circular, and from shape optimization for minimum stress concentration it is well known that the circular shape is seldom optimal. An axisymmetric Finite Element (FE) formulation is used to analyze the bolted connection, and a study...... is performed to establish the need for contact modeling with regard to finding the correct stress concentration factor. Optimization is performed with a simple parameterization with two design variables. Stress reduction of up to 9% is found in the optimization process, and some similarities are found...

  3. Optimal mixture experiments

    CERN Document Server

    Sinha, B K; Pal, Manisha; Das, P

    2014-01-01

    The book dwells mainly on the optimality aspects of mixture designs. As mixture models are a special case of regression models, a general discussion on regression designs has been presented, which includes topics like continuous designs, de la Garza phenomenon, Loewner order domination, Equivalence theorems for different optimality criteria and standard optimality results for single variable polynomial regression and multivariate linear and quadratic regression models. This is followed by a review of the available literature on estimation of parameters in mixture models. Based on recent research findings, the volume also introduces optimal mixture designs for estimation of optimum mixing proportions in different mixture models, which include Scheffé’s quadratic model, Darroch-Waller model, log- contrast model, mixture-amount models, random coefficient models and multi-response model.  Robust mixture designs and mixture designs in blocks have been also reviewed. Moreover, some applications of mixture desig...

  4. Strange Behaviors of Interior-point Methods for Solving Semidefinite Programming Problems in Polynomial Optimization

    NARCIS (Netherlands)

    Nakata, M.; Muramatsu, M.; Waki, H.

    2008-01-01

    We observe that in a simple one-dimensional polynomial optimization problem (POP), the `optimal' values of semidefinite programming (SDP) relaxation problems reported by the standard SDP solvers converge to the optimal value of the POP, while the true optimal values of SDP relaxation problems are st

  5. Optimization and geophysical inverse problems

    Energy Technology Data Exchange (ETDEWEB)

    Barhen, J.; Berryman, J.G.; Borcea, L.; Dennis, J.; de Groot-Hedlin, C.; Gilbert, F.; Gill, P.; Heinkenschloss, M.; Johnson, L.; McEvilly, T.; More, J.; Newman, G.; Oldenburg, D.; Parker, P.; Porto, B.; Sen, M.; Torczon, V.; Vasco, D.; Woodward, N.B.

    2000-10-01

    A fundamental part of geophysics is to make inferences about the interior of the earth on the basis of data collected at or near the surface of the earth. In almost all cases these measured data are only indirectly related to the properties of the earth that are of interest, so an inverse problem must be solved in order to obtain estimates of the physical properties within the earth. In February of 1999 the U.S. Department of Energy sponsored a workshop that was intended to examine the methods currently being used to solve geophysical inverse problems and to consider what new approaches should be explored in the future. The interdisciplinary area between inverse problems in geophysics and optimization methods in mathematics was specifically targeted as one where an interchange of ideas was likely to be fruitful. Thus about half of the participants were actively involved in solving geophysical inverse problems and about half were actively involved in research on general optimization methods. This report presents some of the topics that were explored at the workshop and the conclusions that were reached. In general, the objective of a geophysical inverse problem is to find an earth model, described by a set of physical parameters, that is consistent with the observational data. It is usually assumed that the forward problem, that of calculating simulated data for an earth model, is well enough understood so that reasonably accurate synthetic data can be generated for an arbitrary model. The inverse problem is then posed as an optimization problem, where the function to be optimized is variously called the objective function, misfit function, or fitness function. The objective function is typically some measure of the difference between observational data and synthetic data calculated for a trial model. However, because of incomplete and inaccurate data, the objective function often incorporates some additional form of regularization, such as a measure of smoothness

  6. A Particle Swarm Optimization Algorithm for Optimal Operating Parameters of VMI Systems in a Two-Echelon Supply Chain

    Science.gov (United States)

    Sue-Ann, Goh; Ponnambalam, S. G.

    This paper focuses on the operational issues of a Two-echelon Single-Vendor-Multiple-Buyers Supply chain (TSVMBSC) under vendor managed inventory (VMI) mode of operation. To determine the optimal sales quantity for each buyer in TSVMBC, a mathematical model is formulated. Based on the optimal sales quantity can be obtained and the optimal sales price that will determine the optimal channel profit and contract price between the vendor and buyer. All this parameters depends upon the understanding of the revenue sharing between the vendor and buyers. A Particle Swarm Optimization (PSO) is proposed for this problem. Solutions obtained from PSO is compared with the best known results reported in literature.

  7. Optimization of Bolt Stress

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard

    2013-01-01

    The state of stress in bolts and nuts with ISO metric thread design is examined and optimized. The assumed failure mode is fatigue so the applied preload and the load amplitude together with the stress concentrations define the connection strength. Maximum stress in the bolt is found at, the fillet...... under the head, at the thread start or at the thread root. To minimize the stress concentration shape optimization is applied....

  8. Polynomial Datapaths Optimization

    OpenAIRE

    Parta, Hojat

    2014-01-01

    The research presented focuses on optimization of polynomials using algebraic manipulations at the high level and digital arithmetic techniques at the implementation level. Previous methods lacked any algebraic understanding of the polynomials or only exposed limited potential. We have treated the polynomial optimization problem in abstract algebra allowing us algebraic freedom to transform polynomials. Unlike previous attempts where only a set of limited benchmarks have been used, we have fo...

  9. Guided randomness in optimization

    CERN Document Server

    Clerc, Maurice

    2015-01-01

    The performance of an algorithm used depends on the GNA. This book focuses on the comparison of optimizers, it defines a stress-outcome approach which can be derived all the classic criteria (median, average, etc.) and other more sophisticated.   Source-codes used for the examples are also presented, this allows a reflection on the ""superfluous chance,"" succinctly explaining why and how the stochastic aspect of optimization could be avoided in some cases.

  10. Optimal Responsible Investment

    DEFF Research Database (Denmark)

    Jessen, Pernille

    The paper studies retail Socially Responsible Investment and portfolio allocation. It extends conventional portfolio theory by allowing for a personal value based investment decision. When preferences for responsibility enter the framework for mean-variance analysis, it yields an optimal...... responsible investment model. An example of index investing illustrates the theory. Results show that it is crucial for the responsible investor to consider portfolio risk, expected return, and responsibility simultaneously in order to obtain an optimal portfolio. The model enables responsible investors...

  11. Optimal exploration target zones

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2008-09-01

    Full Text Available Debba, Carranza, Stein, van der Meer Introduction to Remote Sensing Background and Objective of the study Methodology Results Optimal Exploration Target Zones Pravesh Debba1, Emmanual M.J. Carranza2, Alfred Stein2, Freek D. van der Meer2 1... Debba, Carranza, Stein, van der Meer Introduction to Remote Sensing Background and Objective of the study Methodology Results Outline 1 Introduction to Remote Sensing 2 Background and Objective of the study 3 Methodology 4 Results Optimal...

  12. Optimization of Bolt Stress

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard

    2013-01-01

    The state of stress in bolts and nuts with ISO metric thread design is examined and optimized. The assumed failure mode is fatigue so the applied preload and the load amplitude together with the stress concentrations define the connection strength. Maximum stress in the bolt is found at, the fillet...... under the head, at the thread start or at the thread root. To minimize the stress concentration shape optimization is applied....

  13. Optimal time discrimination

    OpenAIRE

    Coşkun, Filiz; Sayalı, Zeynep Ceyda; Gürbüz, Emine; Balcı, Fuat

    2015-01-01

    Optimal Time Discrimination Journal: Quarterly Journal of Experimental Psychology Manuscript ID: QJE-STD 14-039.R1 Manuscript Type: Standard Article Date Submitted by the Author: n/a Complete List of Authors: Çoskun, Filiz; Koç University, Psychology Sayalı Ungerer, Zeynep; Koç University, Psychology Gürbüz, Emine; Koç University, Psychology Balcı, Fuat; Koç University, Psychology Keywords: Decision making, Interval Timing, Optimality, Response Times, Temporal ...

  14. Regularizing portfolio optimization

    Science.gov (United States)

    Still, Susanne; Kondor, Imre

    2010-07-01

    The optimization of large portfolios displays an inherent instability due to estimation error. This poses a fundamental problem, because solutions that are not stable under sample fluctuations may look optimal for a given sample, but are, in effect, very far from optimal with respect to the average risk. In this paper, we approach the problem from the point of view of statistical learning theory. The occurrence of the instability is intimately related to over-fitting, which can be avoided using known regularization methods. We show how regularized portfolio optimization with the expected shortfall as a risk measure is related to support vector regression. The budget constraint dictates a modification. We present the resulting optimization problem and discuss the solution. The L2 norm of the weight vector is used as a regularizer, which corresponds to a diversification 'pressure'. This means that diversification, besides counteracting downward fluctuations in some assets by upward fluctuations in others, is also crucial because it improves the stability of the solution. The approach we provide here allows for the simultaneous treatment of optimization and diversification in one framework that enables the investor to trade off between the two, depending on the size of the available dataset.

  15. 5th Optimization Day

    CERN Document Server

    Mees, Alistair; Fisher, Mike; Jennings, Les

    2000-01-01

    'Optimization Day' (OD) has been a series of annual mini-conferences in Australia since 1994. The purpose of this series of events is to gather researchers in optimization and its related areas from Australia and their collaborators, in order to exchange new developments of optimization theories, methods and their applications. The first four OD mini-conferences were held in The Uni­ versity of Ballarat (1994), The University of New South Wales (1995), The University of Melbourne (1996) and Royal Melbourne Institute of Technology (1997), respectively. They were all on the eastern coast of Australia. The fifth mini-conference Optimization Days was held at the Centre for Ap­ plied Dynamics and Optimization (CADO), Department of Mathematics and Statistics, The University of Western Australia, Perth, from 29 to 30 June 1998. This is the first time the OD mini-conference has been held at the west­ ern coast of Australia. This fifth OD preceded the International Conference on Optimization: Techniques and Applica...

  16. Adaptive Bacterial Foraging Optimization

    Directory of Open Access Journals (Sweden)

    Hanning Chen

    2011-01-01

    Full Text Available Bacterial Foraging Optimization (BFO is a recently developed nature-inspired optimization algorithm, which is based on the foraging behavior of E. coli bacteria. Up to now, BFO has been applied successfully to some engineering problems due to its simplicity and ease of implementation. However, BFO possesses a poor convergence behavior over complex optimization problems as compared to other nature-inspired optimization techniques. This paper first analyzes how the run-length unit parameter of BFO controls the exploration of the whole search space and the exploitation of the promising areas. Then it presents a variation on the original BFO, called the adaptive bacterial foraging optimization (ABFO, employing the adaptive foraging strategies to improve the performance of the original BFO. This improvement is achieved by enabling the bacterial foraging algorithm to adjust the run-length unit parameter dynamically during algorithm execution in order to balance the exploration/exploitation tradeoff. The experiments compare the performance of two versions of ABFO with the original BFO, the standard particle swarm optimization (PSO and a real-coded genetic algorithm (GA on four widely-used benchmark functions. The proposed ABFO shows a marked improvement in performance over the original BFO and appears to be comparable with the PSO and GA.

  17. Training a quantum optimizer

    Science.gov (United States)

    Wecker, Dave; Hastings, Matthew B.; Troyer, Matthias

    2016-08-01

    We study a variant of the quantum approximate optimization algorithm [E. Farhi, J. Goldstone, and S. Gutmann, arXiv:1411.4028] with a slightly different parametrization and a different objective: rather than looking for a state which approximately solves an optimization problem, our goal is to find a quantum algorithm that, given an instance of the maximum 2-satisfiability problem (MAX-2-SAT), will produce a state with high overlap with the optimal state. Using a machine learning approach, we chose a "training set" of instances and optimized the parameters to produce a large overlap for the training set. We then tested these optimized parameters on a larger instance set. As a training set, we used a subset of the hard instances studied by Crosson, Farhi, C. Y.-Y. Lin, H.-H. Lin, and P. Shor (CFLLS) (arXiv:1401.7320). When tested, on the full set, the parameters that we find produce a significantly larger overlap than the optimized annealing times of CFLLS. Testing on other random instances from 20 to 28 bits continues to show improvement over annealing, with the improvement being most notable on the hardest instances. Further tests on instances of MAX-3-SAT also showed improvement on the hardest instances. This algorithm may be a possible application for near-term quantum computers with limited coherence times.

  18. Area Optimized Advanced Encryption Standard

    Directory of Open Access Journals (Sweden)

    Mr. Sandip R. Aher

    2014-08-01

    Full Text Available Performance evaluation of the Advanced Encryption Standard candidates has become led to intensive study of both hardware and software implementations. However, number of papers presents various implementation results, it shows that efficiency could still be greatly improved by applying effective design rules adapted to devices and algorithms. This paper shows various approaches for efficient FPGA implementations of the Advanced Encryption Standard algorithm. For different applications of the AES algorithm may require different s peed/area tradeoffs, we propose a vital study of the possible implementation schemes, but also the discussion of design methodology and algorithmic optimization in order to improve previous reported results. We propose system to evaluate hardware efficiency at different steps of the design process. We also use an optimal pipeline that takes the place and route constraints into account. Resulting circuits significantly improve the previous reported results: throughput has been up to 18.5 Gbits/sec and the area requirements can be limited to 542 slices and 10 RAM blocks with a ratio throughput/area improved by minimum 25% of the best-known designs in the Xilinx Virtex- E technology.

  19. Final Report for the portion performed in the University of Illinois on the project entitled "Optimizing the Cloud-Aerosol-Radiation Ensemble Modeling System to Improve Future Climate Change Projections at Regional to Local Scales"

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Xin-Zhong

    2011-01-31

    This is the final report for the closure of the research tasks on the project that have performed during the entire reporting period in the University of Illinois. It contains a summary of the achievements and details of key results as well as the future plan for this project to be continued in the University of Maryland.

  20. On Symmetries in Optimal Control

    OpenAIRE

    van der Schaft, A. J.

    1986-01-01

    We discuss the use of symmetries in solving optimal control problems. In particular a procedure for obtaining symmetries is given which can be performed before the actual calculation of the optimal control and optimal Hamiltonian.

  1. Handbook of optimization in telecommunications

    CERN Document Server

    Pardalos, Panos M

    2008-01-01

    Covers the field of optimization in telecommunications, and the optimization developments that are frequently applied to telecommunications. This book aims to provide a reference tool for scientists and engineers in telecommunications who depend upon optimization.

  2. On Symmetries in Optimal Control

    NARCIS (Netherlands)

    Schaft, A.J. van der

    1986-01-01

    We discuss the use of symmetries in solving optimal control problems. In particular a procedure for obtaining symmetries is given which can be performed before the actual calculation of the optimal control and optimal Hamiltonian.

  3. Research report - Solar thermal power 2000plus. Advancement and optimization of charging and discharging systems for tank and ground heat stores; Forschungsbericht - Solarthermie 2000plus. Weiterentwicklung und Optimierung von Be- und Entladesystemen fuer Tank- und Erdbeckenspeicher

    Energy Technology Data Exchange (ETDEWEB)

    Goeppert, Stefan; Lohse, Rolf; Urbaneck, Thorsten; Schirmer, Ulrich; Platzer, Bernd [Technische Univ. Chemnitz (Germany). Fakultaet fuer Maschinenbau; Buehl, Juergen; Nilius, Andreas [Technische Univ. Ilmenau (Germany). Fakultaet fuer Maschinenbau

    2009-07-01

    The authors of the contribution under consideration examine different constructions for the charging and discharging of thermal storage systems experimentally and by means of computerized simulation. The substantial goals of this investigation are: (a) Systematization and analysis of existing constructions; (b) Advancement and optimization of charging and discharging systems; (c) Deduction of guidelines for planning and design; (d) Investigation of the transferability from the experiment on medium and large storages; (e) Integration of industrial partners (co-operation and practice test). The results of these investigations and the realizations are described in this contribution in detail.

  4. Optimal control of radiator systems; Optimal reglering av radiatorsystem

    Energy Technology Data Exchange (ETDEWEB)

    Wollerstrand, J.; Ljunggren, P.; Johansson, P.O.

    2007-07-01

    This report presents results from a study aiming to considerably improve the development towards minimizing the primary return temperature from a district heating (DH) substation by optimizing the control algorithm for the space heating system. The investigation of this research field started about 20 years ago in Sweden when low flow operation of space heating systems was introduced. Following a couple of years of partly confused discussions, the method was accepted by many, but was rejected by others. Our thesis is that further improvement of cooling of DH water is possible when advanced, but robust, control algorithms are used for the space heating system. A space heating system is traditionally designed for a specific constant circulation flow combined with a suitable control curve for the space heating supply temperature as a function of the outdoor temperature. Optimal choice of the control curve varies from case to case and is an issue both we and others have dealt with in previous work. A large step was to derive theoretical control curves for optimal control of the space heating system, with an analysis of how temperature and circulation flow varies with heat load. The estimated gain varies strongly depending on the conditions, however, with realistic conditions it can be as much as 5 deg C decreased DH return temperature on yearly average. To be able to work properly under varying physical circumstances, a control algorithm must be able to combine variation of space heating supply temperature and circulation flow as a function of the heat load. By regulating the rotation speed of the circulation pump this can be achieved. Such regulation can be adjusted for each and every building by regulating a few parameters in a regulator. The results from this work are, that important theoretical knowledge has been completed, to show results systematically and to find support from practical experiments. A hands-on description of the method for optimizing DH water

  5. Substring Range Reporting

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li

    2011-01-01

    to a new problem, which we call substring range reporting. Hence, we unify the previous work by showing that we may restrict our attention to a single problem rather than studying each of the above problems individually. – We show how to solve substring range reporting with optimal query time and little...

  6. Decision-Theoretic Methods in Simulation Optimization

    Science.gov (United States)

    2014-09-24

    Materiel Command REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is...Alamos National Lab: Frazier visited LANL , hosted by Frank Alexander, in January 2013, where he discussed the use of simulation optimization methods for...Alexander, Turab Lookman, and others from LANL , at the Materials Informatics Workshop at the Sante Fe Institute in April 2013. In February 2014, Frazier

  7. Cost optimal levels for energy performance requirements

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike;

    This report summarises the work done within the Concerted Action EPBD from December 2010 to April 2011 in order to feed into the European Commission's proposal for a common European procedure for a Cost-Optimal methodology under the Directive on the Energy Performance of Buildings (recast) 2010/3...

  8. Graphic Interface for LCP2 Optimization Program

    DEFF Research Database (Denmark)

    Nicolae, Taropa Laurentiu; Gaunholt, Hans

    1998-01-01

    This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...

  9. Determination of optimal gains for constrained controllers

    Energy Technology Data Exchange (ETDEWEB)

    Kwan, C.M.; Mestha, L.K.

    1993-08-01

    In this report, we consider the determination of optimal gains, with respect to a certain performance index, for state feedback controllers where some elements in the gain matrix are constrained to be zero. Two iterative schemes for systematically finding the constrained gain matrix are presented. An example is included to demonstrate the procedures.

  10. Better utilisation of district heating systems. Sub-project: Optimization of heat distribution - the Berlin pilot project. Final report; Bessere Ausnutzung von Fernwaermeanlagen. Teilvorhaben: Optimierung der Waeermeverteilung - Pilotprojekt Berlin. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Szepansky, T.; Ziemann, O.

    2001-09-01

    The Berlin pilot project comprises three aspects. (1) 'Generator simulation': Modelling of power generation systems in BoFiT was validated by means of existing calculation programs (Bewag) and measurements (HEW, HKW Hafen). (2) 'Optimization of pump use'. (3) 'Centralization of pressure maintenance'. The two latter aspects serve for optimized hydraulic control and supply assurance for validating network simulation in offline and online operation, including network data acquisition. [German] In KWK-Anlagen wird wirtschaftlich Strom und Waerme erzeugt. Der Aufwand fuer den Waermetransport ist vergleichsweise hoch. Automatisch geregelte und gesteuerte Umwaelzpumpen mit grossen Umwaelzwassermassenstroemen und Druckhoehen bieten ein hohes Optimierungspotential fuer die hydraulische Betriebsfuehrung von Fernwaermeversorgungsunternehmen. Der Einsatz von modular aufgebauten EDV-Systemen zur Betriebsoptimierung ist Gegenstand von staendig weiterfuehrenden Untersuchungen. Das Pilotprojekt Berlin 'Optimierung der Waermeverteilung' gliedert sich in drei Arbeitspunkte. Beim Arbeitspunkt 'Erzeugersimulation' wurde ausgehend von existierenden Kreislauf-Rechenprogrammen (Bewag) und Betriebsmessungen (HEW, HKW Hafen) die Modellbildung von Erzeugungsanlagen im Programmsystem BoFiT ueberprueft. Die Arbeitspunkte 'Pumpen-Einsatzoptimierung' und 'Zentralisierung der Druckhaltung' dienten der Optimierung der hydraulischen Betriebsfuehrung unter Einhaltung der Versorgungssicherheit zur Ueberpruefung der Netzsimulation sowohl im Offline- als auch im Online-Betrieb gekoppelt mit der Netzdatenerfassung. (orig.)

  11. SOL - SIZING AND OPTIMIZATION LANGUAGE COMPILER

    Science.gov (United States)

    Scotti, S. J.

    1994-01-01

    SOL is a computer language which is geared to solving design problems. SOL includes the mathematical modeling and logical capabilities of a computer language like FORTRAN but also includes the additional power of non-linear mathematical programming methods (i.e. numerical optimization) at the language level (as opposed to the subroutine level). The language-level use of optimization has several advantages over the traditional, subroutine-calling method of using an optimizer: first, the optimization problem is described in a concise and clear manner which closely parallels the mathematical description of optimization; second, a seamless interface is automatically established between the optimizer subroutines and the mathematical model of the system being optimized; third, the results of an optimization (objective, design variables, constraints, termination criteria, and some or all of the optimization history) are output in a form directly related to the optimization description; and finally, automatic error checking and recovery from an ill-defined system model or optimization description is facilitated by the language-level specification of the optimization problem. Thus, SOL enables rapid generation of models and solutions for optimum design problems with greater confidence that the problem is posed correctly. The SOL compiler takes SOL-language statements and generates the equivalent FORTRAN code and system calls. Because of this approach, the modeling capabilities of SOL are extended by the ability to incorporate existing FORTRAN code into a SOL program. In addition, SOL has a powerful MACRO capability. The MACRO capability of the SOL compiler effectively gives the user the ability to extend the SOL language and can be used to develop easy-to-use shorthand methods of generating complex models and solution strategies. The SOL compiler provides syntactic and semantic error-checking, error recovery, and detailed reports containing cross-references to show where

  12. Optimization of Heat Exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Ivan Catton

    2010-10-01

    The objective of this research is to develop tools to design and optimize heat exchangers (HE) and compact heat exchangers (CHE) for intermediate loop heat transport systems found in the very high temperature reator (VHTR) and other Generation IV designs by addressing heat transfer surface augmentation and conjugate modeling. To optimize heat exchanger, a fast running model must be created that will allow for multiple designs to be compared quickly. To model a heat exchanger, volume averaging theory, VAT, is used. VAT allows for the conservation of mass, momentum and energy to be solved for point by point in a 3 dimensional computer model of a heat exchanger. The end product of this project is a computer code that can predict an optimal configuration for a heat exchanger given only a few constraints (input fluids, size, cost, etc.). As VAT computer code can be used to model characteristics )pumping power, temperatures, and cost) of heat exchangers more quickly than traditional CFD or experiment, optimization of every geometric parameter simultaneously can be made. Using design of experiment, DOE and genetric algorithms, GE, to optimize the results of the computer code will improve heat exchanger disign.

  13. Optimization of Metronidazole Emulgel

    Directory of Open Access Journals (Sweden)

    Monica Rao

    2013-01-01

    Full Text Available The purpose of the present study was to develop and optimize the emulgel system for MTZ (Metronidazole, a poorly water soluble drug. The pseudoternary phase diagrams were developed for various microemulsion formulations composed of Capmul 908 P, Acconon MC8-2, and propylene glycol. The emulgel was optimized using a three-factor, two-level factorial design, the independent variables selected were Capmul 908 P, and surfactant mixture (Acconon MC8-2 and gelling agent, and the dependent variables (responses were a cumulative amount of drug permeated across the dialysis membrane in 24 h ( and spreadability (. Mathematical equations and response surface plots were used to relate the dependent and independent variables. The regression equations were generated for responses and . The statistical validity of the polynomials was established, and optimized formulation factors were selected. Validation of the optimization study with 3 confirmatory runs indicated a high degree of prognostic ability of response surface methodology. Emulgel system of MTZ was developed and optimized using 23 factorial design and could provide an effective treatment against topical infections.

  14. Optimized Kernel Entropy Components.

    Science.gov (United States)

    Izquierdo-Verdiguier, Emma; Laparra, Valero; Jenssen, Robert; Gomez-Chova, Luis; Camps-Valls, Gustau

    2016-02-25

    This brief addresses two main issues of the standard kernel entropy component analysis (KECA) algorithm: the optimization of the kernel decomposition and the optimization of the Gaussian kernel parameter. KECA roughly reduces to a sorting of the importance of kernel eigenvectors by entropy instead of variance, as in the kernel principal components analysis. In this brief, we propose an extension of the KECA method, named optimized KECA (OKECA), that directly extracts the optimal features retaining most of the data entropy by means of compacting the information in very few features (often in just one or two). The proposed method produces features which have higher expressive power. In particular, it is based on the independent component analysis framework, and introduces an extra rotation to the eigen decomposition, which is optimized via gradient-ascent search. This maximum entropy preservation suggests that OKECA features are more efficient than KECA features for density estimation. In addition, a critical issue in both the methods is the selection of the kernel parameter, since it critically affects the resulting performance. Here, we analyze the most common kernel length-scale selection criteria. The results of both the methods are illustrated in different synthetic and real problems. Results show that OKECA returns projections with more expressive power than KECA, the most successful rule for estimating the kernel parameter is based on maximum likelihood, and OKECA is more robust to the selection of the length-scale parameter in kernel density estimation.

  15. Moon Landing Trajectory Optimization

    Directory of Open Access Journals (Sweden)

    Ibrahim Mustafa MEHEDI

    2016-03-01

    Full Text Available Trajectory optimization is a crucial process during the planning phase of a spacecraft landing mission. Once a trajectory is determined, guidance algorithms are created to guide the vehicle along the given trajectory. Because fuel mass is a major driver of the total vehicle mass, and thus mission cost, the objective of most guidance algorithms is to minimize the required fuel consumption. Most of the existing algorithms are termed as “near-optimal” regarding fuel expenditure. The question arises as to how close to optimal are these guidance algorithms. To answer this question, numerical trajectory optimization techniques are often required. With the emergence of improved processing power and the application of new methods, more direct approaches may be employed to achieve high accuracy without the associated difficulties in computation or pre-existing knowledge of the solution. An example of such an approach is DIDO optimization. This technique is applied in the current research to find these minimum fuel optimal trajectories.

  16. A Method for Determining Optimal Residential Energy Efficiency Packages

    Energy Technology Data Exchange (ETDEWEB)

    Polly, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gestwick, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bianchi, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Anderson, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Judkoff, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-04-01

    This report describes an analysis method for determining optimal residential energy efficiency retrofit packages and, as an illustrative example, applies the analysis method to a 1960s-era home in eight U.S. cities covering a range of International Energy Conservation Code (IECC) climate regions. The method uses an optimization scheme that considers average energy use (determined from building energy simulations) and equivalent annual cost to recommend optimal retrofit packages specific to the building, occupants, and location.

  17. ASL: Comparison of presaturation and RF pulse optimization

    DEFF Research Database (Denmark)

    Holm, David; Sidaros, Karam

    2005-01-01

    resulting in the inversion pulse affecting the acquired signal from the imaging area. This systematic error can be reduced by increasing the gap between the inversion and imaging regions, by using optimized inversion pulses e.g. FOCI1 or by saturating the signal from static tissue in the imaging area prior...... to acquiring the image. In this simulation study, the use of presaturation is compared with using optimized RF pulses. Furthermore the effect of using and optimizing crusher gradients is reported....

  18. Drilling Optimization: A Review

    Directory of Open Access Journals (Sweden)

    Abhilash M Bharadwaj

    2013-06-01

    Full Text Available With rapidly growing global demand for energy resources, oil and gas exploration & production companies face mounting pressure to maximize supply and increase the rate of discovery for new energy sources. Increasingly operating in more remote locations and investing heavily in equipment and facilities, companies face greater financial and operational risks than ever before. Optimization of drilling parameters during drilling operations aims to optimize weight on bit, bit rotation speed for obtaining maximum drilling rate as well as minimizing the drilling cost. Communication and computer technologies are among the most important disciplines which can contribute to drilling optimization. Large amount of data could be piped through different locations on the planet in reliable and time efficient manners.

  19. Optimal Aging and Death

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Strulik, Holger

    2010-01-01

    This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...... health investments. At the same time, physiological aspects of the aging process influence optimal savings and health investment. We calibrate the model for the average US male in 2000 and proceed to show that the calibrated model accounts well for the cross-country link between labor productivity...... and life expectancy in the same year ("the Preston curve"); cross-country income differences can explain differences in life expectancy at age 20 of up to a decade. Moreover, technological change in health care of about 1.1% per year can account for the observed shift in the Preston curve between 1980...

  20. Optimal Bitter Coil Solenoid

    CERN Document Server

    Kobelev, V

    2016-01-01

    Bitter coil is an electromagnet used for the generation of exceptionally strong magnetic fields. The upper bound of magnet flux density is restricted by several factors. One principal restriction is the high stresses due to Lorentz forces in the coil. The Lorentz forces generate the distributed body force, which acts as the pressure of magnetic field. The common radial thickness profile of the Bitter coil is constant. In this paper the possibility of optimization by means of non-constant radial thickness profile of the Bitter coil is studied. The close form expression for optimal thickness profile is obtained. Both designs are compared and the considerable improvement of magnetic flux density is demonstrated. Moreover, the optimal design improves the shape of cooling channels. Namely, the highest cross-section of cooling channel is at the most thermally loaded inner surface of the coil.

  1. Submodular functions and optimization

    CERN Document Server

    Fujishige, Satoru

    2005-01-01

    It has widely been recognized that submodular functions play essential roles in efficiently solvable combinatorial optimization problems. Since the publication of the 1st edition of this book fifteen years ago, submodular functions have been showing further increasing importance in optimization, combinatorics, discrete mathematics, algorithmic computer science, and algorithmic economics, and there have been made remarkable developments of theory and algorithms in submodular functions. The 2nd edition of the book supplements the 1st edition with a lot of remarks and with new two chapters: "Submodular Function Minimization" and "Discrete Convex Analysis." The present 2nd edition is still a unique book on submodular functions, which is essential to students and researchers interested in combinatorial optimization, discrete mathematics, and discrete algorithms in the fields of mathematics, operations research, computer science, and economics. Key features: - Self-contained exposition of the theory of submodular ...

  2. Optimally segmented magnetic structures

    DEFF Research Database (Denmark)

    Insinga, Andrea Roberto; Bahl, Christian; Bjørk, Rasmus;

    ], or are applicable only to analytically solvable geometries[4]. In addition, some questions remained fundamentally unanswered, such as how to segment a given design into N uniformly magnetized pieces.Our method calculates the globally optimal shape and magnetization direction of each segment inside a certain......We present a semi-analytical algorithm for magnet design problems, which calculates the optimal way to subdivide a given design region into uniformly magnetized segments.The availability of powerful rare-earth magnetic materials such as Nd-Fe-B has broadened the range of applications of permanent...... designarea with an optional constraint on the total amount of magnetic material. The method can be applied to any objective functional which is linear respect to the field, and with any combination of linear materials. Being based on an analytical-optimization approach, the algorithm is not computationally...

  3. Optimization by record dynamics

    DEFF Research Database (Denmark)

    Barettin, Daniele; Sibani, Paolo

    2014-01-01

    Large dynamical changes in thermalizing glassy systems are triggered by trajectories crossing record sized barriers, a behavior revealing the presence of a hierarchical structure in configuration space. The observation is here turned into a novel local search optimization algorithm dubbed record...... dynamics optimization,or RDO. RDO uses the Metropolis rule to accept or reject candidate solutions depending on the value of a parameter akin to the temperature and minimizes the cost function of the problem at hand through cycles where its ‘temperature’ is raised and subsequently decreased in order...... to expediently generate record high (and low) values of the cost function. Below, RDO is introduced and then tested by searching for the ground state of the Edwards–Anderson spin-glass model, in two and three spatial dimensions. A popularand highly efficient optimization algorithm, parallel tempering (PT...

  4. Optimal Composite Curing System

    Science.gov (United States)

    Handel, Paul; Guerin, Daniel

    The Optimal Composite Curing System (OCCS) is an intelligent control system which incorporates heat transfer and resin kinetic models coupled with expert knowledge. It controls the curing of epoxy impregnated composites, preventing part overheating while maintaining maximum cure heatup rate. This results in a significant reduction in total cure time over standard methods. The system uses a cure process model, operating in real-time, to determine optimal cure profiles for tool/part configurations of varying thermal characteristics. These profiles indicate the heating and cooling necessary to insure a complete cure of each part in the autoclave in the minimum amount of time. The system coordinates these profiles to determine an optimal cure profile for a batch of thermally variant parts. Using process specified rules for proper autoclave operation, OCCS automatically controls the cure process, implementing the prescribed cure while monitoring the operation of the autoclave equipment.

  5. Discrete Variational Optimal Control

    CERN Document Server

    Jimenez, Fernando; de Diego, David Martin

    2012-01-01

    This paper develops numerical methods for optimal control of mechanical systems in the Lagrangian setting. It extends the theory of discrete mechanics to enable the solutions of optimal control problems through the discretization of variational principles. The key point is to solve the optimal control problem as a variational integrator of a specially constructed higher-dimensional system. The developed framework applies to systems on tangent bundles, Lie groups, underactuated and nonholonomic systems with symmetries, and can approximate either smooth or discontinuous control inputs. The resulting methods inherit the preservation properties of variational integrators and result in numerically robust and easily implementable algorithms. Several theoretical and a practical examples, e.g. the control of an underwater vehicle, will illustrate the application of the proposed approach.

  6. Discrete Variational Optimal Control

    Science.gov (United States)

    Jiménez, Fernando; Kobilarov, Marin; Martín de Diego, David

    2013-06-01

    This paper develops numerical methods for optimal control of mechanical systems in the Lagrangian setting. It extends the theory of discrete mechanics to enable the solutions of optimal control problems through the discretization of variational principles. The key point is to solve the optimal control problem as a variational integrator of a specially constructed higher dimensional system. The developed framework applies to systems on tangent bundles, Lie groups, and underactuated and nonholonomic systems with symmetries, and can approximate either smooth or discontinuous control inputs. The resulting methods inherit the preservation properties of variational integrators and result in numerically robust and easily implementable algorithms. Several theoretical examples and a practical one, the control of an underwater vehicle, illustrate the application of the proposed approach.

  7. Multicriteria VMAT optimization

    CERN Document Server

    Craft, David; Wala, Jeremiah; Bortfeld, Thomas

    2011-01-01

    We describe a new optimization technique for planning single arc VMAT (volumetric modulated arc therapy). The technique allows the planner to first navigate the ideal dose distribution space created by forming a 180-beam IMRT Pareto optimal surface. The plan that is selected is then made VMAT deliverable by a simple fluence map merging and sequencing algorithm. Our approach offers significant improvements over existing algorithms. The first is the multicriteria planning aspect, which greatly speeds up planning time and allows the user to select the plan which represents the most desirable compromise between target coverage and organ at risk sparing. The second is the (user-chosen) epsilon-optimality guarantee of the final VMAT plan. Finally, the user can explore the tradeoff between delivery time and plan quality, which is a fundamental aspect of VMAT that cannot be easily investigated with current commercial planning systems.

  8. Optimized packings with applications

    CERN Document Server

    Pintér, János

    2015-01-01

    This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...

  9. Anxiety and unrealistic optimism.

    Science.gov (United States)

    Dewberry, C; Ing, M; James, S; Nixon, M; Richardson, S

    1990-04-01

    Substantial evidence suggest that people tend to be unrealistically optimistic that positive events will happen to them and that negative events will not. However, recent research indicates that under certain conditions they may be unrealistically pessimistic. Variations in the levels of optimism and pessimism experienced towards events are generally given cognitive explanations. A relation between optimism and pessimism and anxiety, a variable related to emotion as well as cognition, was investigated in the present study. An inverse correlation was found between how anxious female students in England felt about certain negative events and how unrealistically optimistic they were about the occurrence of those events. It was concluded that the degree of anxiety experienced toward a negative event may affect the level of unrealistic optimism or pessimism toward it.

  10. Optimal Aging and Death

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Strulik, Holger

    2010-01-01

    This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...... health investments. At the same time, physiological aspects of the aging process inuence optimal savings and health investment. We calibrate the model for the average US male in 2000 and proceed to show that the calibrated model accounts well for the cross-country link between labor productivity and life...... expectancy in the same year ("the Preston curve"); cross-country income differences can explain differences in life expectancy at age 20 of up to a decade. Moreover, technological change in health care of about 1.1% per year can account for the observed shift in the Preston curve between 1980 and 2000....

  11. Torsional friction damper optimization

    Science.gov (United States)

    Ye, Shaochun; Williams, Keith A.

    2006-06-01

    A new approach for the analysis of friction dampers is presented in this work. The exact form of the steady-state solution for a friction damper implemented on a primary system is developed and numerical solutions are used to determine the optimum friction in a friction damper applied to a specific primary system. When compared to classical results presented by earlier authors, the new approach provides a more optimal solution. In addition, viscous damping in the primary system may be included with the new analysis approach. The ability to optimize a friction damper when viscous damping is included in the primary system is a significant improvement over earlier methods and shows potential for serving as a guide to realizing a more accurate estimate of the optimal damping for friction dampers.

  12. Drilling Optimization: A Review

    Directory of Open Access Journals (Sweden)

    Vinayaka S

    2012-08-01

    Full Text Available With rapidly growing global demand for energy resources, oil and gas exploration & production companies face mounting pressure to maximize supply and increase the rate of discovery for new energy sources. Increasingly operating in more remote locations and investing heavily in equipment and facilities, companies face greater financial and operational risks than ever before. Optimization of drilling parameters during drilling operations aims to optimize weight on bit, bit rotation speed for obtaining maximum drilling rate as well as minimizing the drilling cost. Communication and computer technologies are among the most important disciplines which can contribute to drilling optimization. Large amount of data could be piped through different locations on the planet in reliable and time efficient manners.

  13. Optimal Aging and Death

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Strulik, Holger

    2010-01-01

    and life expectancy in the same year ("the Preston curve"); cross-country income differences can explain differences in life expectancy at age 20 of up to a decade. Moreover, technological change in health care of about 1.1% per year can account for the observed shift in the Preston curve between 1980......This study introduces physiological aging into a simple model of optimal intertemporal consumption. In this endeavor we draw on the natural science literature on aging. According to the purposed theory, the speed of the aging process and the time of death are endogenously determined by optimal...... health investments. At the same time, physiological aspects of the aging process influence optimal savings and health investment. We calibrate the model for the average US male in 2000 and proceed to show that the calibrated model accounts well for the cross-country link between labor productivity...

  14. Reverse Osmosis Optimization

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-08-01

    This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.

  15. Reverse Osmosis Optimization

    Energy Technology Data Exchange (ETDEWEB)

    McMordie Stoughton, Kate; Duan, Xiaoli; Wendel, Emily M.

    2013-08-26

    This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). ¬The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.¬

  16. Manufacturing tolerant topology optimization

    DEFF Research Database (Denmark)

    Sigmund, Ole

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick...... (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization...... approach, under- and over-etching is modelled by image processing-based "erode" and "dilate" operators and the optimization problem is formulated as a worst case design problem. Applications of the method to the design of macro structures for minimum compliance and micro compliant mechanisms show...

  17. Momentum particle swarm optimizer

    Institute of Scientific and Technical Information of China (English)

    Liu Yu; Qin Zheng; Wang Xianghua; He Xingshi

    2005-01-01

    The previous particle swarm optimizers lack direct mechanism to prevent particles beyond predefined search space, which results in invalid solutions in some special cases. A momentum factor is introduced into the original particle swarm optimizer to resolve this problem. Furthermore, in order to accelerate convergence, a new strategy about updating velocities is given. The resulting approach is mromentum-PSO which guarantees that particles are never beyond predefined search space without checking boundary in every iteration. In addition, linearly decreasing wight PSO (LDW-PSO) equipped with a boundary checking strategy is also discussed, which is denoted as LDWBC-PSO. LDW-PSO, LDWBC-PSO and momentum-PSO are compared in optimization on five test functions. The experimental results show that in some special cases LDW-PSO finds invalid solutions and LDWBC-PSO has poor performance, while momentum-PSO not only exhibits good performance but also reduces computational cost for updating velocities.

  18. Final Report for UC Berkeley Terascale Optimal PDE Solvers TOPS DOE Award Number DE-FC02-01ER25478 9/15/2001 – 9/14/2006

    Energy Technology Data Exchange (ETDEWEB)

    James Demmel

    2007-02-26

    In many areas of science, physical experimentation may be too dangerous, too expensive or even impossible. Instead, large-scale simulations, validated by comparison with related experiments in well-understood laboratory contexts, are used by scientists to gain insight and confirmation of existing theories in such areas, without benefit of full experimental verification. The goal of the TOPS ISIC was to develop and implement algorithms and support scientific investigations performed by DOE-sponsored researchers. A major component of this effort is to provide software for large scale parallel computers capable of efficiently solving the enormous systems of equations arising from the nonlinear PDEs underlying these simulations. Several TOPS supported packages where designed in part (ScaLAPACK) or in whole (SuperLU) at Berkeley, and are widely used beyond SciDAC and DOE. Beyond continuing to develop these codes, our main effort focused on automatic performance tuning of the sparse matrix kernels (eg sparse-matrix-vector-multiply, or SpMV) at the core of many TOPS iterative solvers. Based on the observation that the fastest implementation of SpMV (and other kernels) can depend dramatically both on the computer and the matrix (the latter of which is not known until run-time), we developed and released a system called OSKI (Optimized Sparse Kernel Interface) that will automatically produce optimized version of SpMV (and other kernels), hiding complicated implementation details from the user. OSKI led to a 2x speedup in SpMV in a DOE accelerator design code, a 2x speedup in a commercial lithography simulation, and has been downloaded over 500 times. In addition to a stand-alone version, OSKI was also integrated into the TOPS-supported PETSc system.

  19. Optimization Modeling with Spreadsheets

    CERN Document Server

    Baker, Kenneth R

    2011-01-01

    This introductory book on optimization (mathematical programming) includes coverage on linear programming, nonlinear programming, integer programming and heuristic programming; as well as an emphasis on model building using Excel and Solver.  The emphasis on model building (rather than algorithms) is one of the features that makes this book distinctive. Most books devote more space to algorithmic details than to formulation principles. These days, however, it is not necessary to know a great deal about algorithms in order to apply optimization tools, especially when relying on the sp

  20. Terascale Optimal PDE Simulations

    Energy Technology Data Exchange (ETDEWEB)

    David Keyes

    2009-07-28

    The Terascale Optimal PDE Solvers (TOPS) Integrated Software Infrastructure Center (ISIC) was created to develop and implement algorithms and support scientific investigations performed by DOE-sponsored researchers. These simulations often involve the solution of partial differential equations (PDEs) on terascale computers. The TOPS Center researched, developed and deployed an integrated toolkit of open-source, optimal complexity solvers for the nonlinear partial differential equations that arise in many DOE application areas, including fusion, accelerator design, global climate change and reactive chemistry. The algorithms created as part of this project were also designed to reduce current computational bottlenecks by orders of magnitude on terascale computers, enabling scientific simulation on a scale heretofore impossible.

  1. Analytical methods of optimization

    CERN Document Server

    Lawden, D F

    2006-01-01

    Suitable for advanced undergraduates and graduate students, this text surveys the classical theory of the calculus of variations. It takes the approach most appropriate for applications to problems of optimizing the behavior of engineering systems. Two of these problem areas have strongly influenced this presentation: the design of the control systems and the choice of rocket trajectories to be followed by terrestrial and extraterrestrial vehicles.Topics include static systems, control systems, additional constraints, the Hamilton-Jacobi equation, and the accessory optimization problem. Prereq

  2. Code Optimization in FORM

    CERN Document Server

    Kuipers, J; Vermaseren, J A M

    2013-01-01

    We describe the implementation of output code optimization in the open source computer algebra system FORM. This implementation is based on recently discovered techniques of Monte Carlo tree search to find efficient multivariate Horner schemes, in combination with other optimization algorithms, such as common subexpression elimination. For systems for which no specific knowledge is provided it performs significantly better than other methods we could compare with. Because the method has a number of free parameters, we also show some methods by which to tune them to different types of problems.

  3. Wind farm design optimization

    Energy Technology Data Exchange (ETDEWEB)

    Carreau, Michel; Morgenroth, Michael; Belashov, Oleg; Mdimagh, Asma; Hertz, Alain; Marcotte, Odile

    2010-09-15

    Innovative numerical computer tools have been developed to streamline the estimation, the design process and to optimize the Wind Farm Design with respect to the overall return on investment. The optimization engine can find the collector system layout automatically which provide a powerful tool to quickly study various alternative taking into account more precisely various constraints or factors that previously would have been too costly to analyze in details with precision. Our Wind Farm Tools have evolved through numerous projects and created value for our clients yielding Wind Farm projects with projected higher returns.

  4. Optimization of Truss Height

    Directory of Open Access Journals (Sweden)

    Tomas Ulitinas

    2011-04-01

    Full Text Available The article analyzes the task in truss height and in the optimization of the cross-sections of their elements. Element cross-sections are designed of steel profiles considering requirements for strength, stability and rigidity. A mathematical model is formulated as a nonlinear mathematical programming problem. It is solved as an iterative process, using mathematical software package “MATLAB” routine “fmincon”. The ratio of buckling is corrected in the each iteration. Optimization results are compared with those obtained applying software package “Robot Millennium”.Article in Lithuanian

  5. Optimal Responsible Investment

    DEFF Research Database (Denmark)

    Jessen, Pernille

    The paper studies retail Socially Responsible Investment and portfolio allocation. It extends conventional portfolio theory by allowing for a personal value based investment decision. When preferences for responsibility enter the framework for mean-variance analysis, it yields an optimal...... responsible investment model. An example of index investing illustrates the theory. Results show that it is crucial for the responsible investor to consider portfolio risk, expected return, and responsibility simultaneously in order to obtain an optimal portfolio. The model enables responsible investors...... to benefit from their personal preferences and to remain rational actors in the financial market....

  6. Optimal exploration target zones

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2008-09-01

    Full Text Available , Carranza, Stein, van der Meer Introduction to Remote Sensing Background and Objective of the study Methodology Results Optimal Exploration Target Zones Pravesh Debba1, Emmanual M.J. Carranza2, Alfred Stein2, Freek D. van der Meer2 1CSIR, Logistics... and Quantitative Methods, CSIR Built Environment 2International Institute for Geo-Information Science and Earth Observation (ITC), Hengelosestraat 99, P.O. Box 6, 7500AA Enschede, The Netherlands Optimal Exploration Target Zones Debba, Carranza, Stein, van der Meer...

  7. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  8. Advanced backend optimization

    CERN Document Server

    Touati, Sid

    2014-01-01

    This book is a summary of more than a decade of research in the area of backend optimization. It contains the latest fundamental research results in this field. While existing books are often more oriented toward Masters students, this book is aimed more towards professors and researchers as it contains more advanced subjects.It is unique in the sense that it contains information that has not previously been covered by other books in the field, with chapters on phase ordering in optimizing compilation; register saturation in instruction level parallelism; code size reduction for software pipe

  9. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  10. Practical methods of optimization

    CERN Document Server

    Fletcher, R

    2013-01-01

    Fully describes optimization methods that are currently most valuable in solving real-life problems. Since optimization has applications in almost every branch of science and technology, the text emphasizes their practical aspects in conjunction with the heuristics useful in making them perform more reliably and efficiently. To this end, it presents comparative numerical studies to give readers a feel for possibile applications and to illustrate the problems in assessing evidence. Also provides theoretical background which provides insights into how methods are derived. This edition offers rev

  11. Optimization of dental implantation

    Science.gov (United States)

    Dol, Aleksandr V.; Ivanov, Dmitriy V.

    2017-02-01

    Modern dentistry can not exist without dental implantation. This work is devoted to study of the "bone-implant" system and to optimization of dental prostheses installation. Modern non-invasive methods such as MRI an 3D-scanning as well as numerical calculations and 3D-prototyping allow to optimize all of stages of dental prosthetics. An integrated approach to the planning of implant surgery can significantly reduce the risk of complications in the first few days after treatment, and throughout the period of operation of the prosthesis.

  12. Optimal Responsible Investment

    DEFF Research Database (Denmark)

    Jessen, Pernille

    standards. This paper considers optimal responsible investment for a small retail investor. It extends conventional portfolio theory by allowing for a personal-value based investment decision. Preferences for responsibility are defined in the framework of mean-variance analysis and an optimal responsible......Numerous institutions are now engaged in Socially Responsible Investment or have signed the "UN Principles for Responsible Investment". Retail investors, however, are still lacking behind. This is peculiar since the sector constitutes key stakeholders in environmental, social and governmental...

  13. Optimal exploration systems

    Science.gov (United States)

    Klesh, Andrew T.

    This dissertation studies optimal exploration, defined as the collection of information about given objects of interest by a mobile agent (the explorer) using imperfect sensors. The key aspects of exploration are kinematics (which determine how the explorer moves in response to steering commands), energetics (which determine how much energy is consumed by motion and maneuvers), informatics (which determine the rate at which information is collected) and estimation (which determines the states of the objects). These aspects are coupled by the steering decisions of the explorer. We seek to improve exploration by finding trade-offs amongst these couplings and the components of exploration: the Mission, the Path and the Agent. A comprehensive model of exploration is presented that, on one hand, accounts for these couplings and on the other hand is simple enough to allow analysis. This model is utilized to pose and solve several exploration problems where an objective function is to be minimized. Specific functions to be considered are the mission duration and the total energy. These exploration problems are formulated as optimal control problems and necessary conditions for optimality are obtained in the form of two-point boundary value problems. An analysis of these problems reveals characteristics of optimal exploration paths. Several regimes are identified for the optimal paths including the Watchtower, Solar and Drag regime, and several non-dimensional parameters are derived that determine the appropriate regime of travel. The so-called Power Ratio is shown to predict the qualitative features of the optimal paths, provide a metric to evaluate an aircrafts design and determine an aircrafts capability for flying perpetually. Optimal exploration system drivers are identified that provide perspective as to the importance of these various regimes of flight. A bank-to-turn solar-powered aircraft flying at constant altitude on Mars is used as a specific platform for

  14. An introduction to optimization

    CERN Document Server

    Chong, Edwin K P

    2013-01-01

    Praise for the Third Edition "". . . guides and leads the reader through the learning path . . . [e]xamples are stated very clearly and the results are presented with attention to detail.""  -MAA Reviews  Fully updated to reflect new developments in the field, the Fourth Edition of Introduction to Optimization fills the need for accessible treatment of optimization theory and methods with an emphasis on engineering design. Basic definitions and notations are provided in addition to the related fundamental background for linear algebra, geometry, and calculus.  This new

  15. A twist on folding: Predicting optimal sequences and optimal folds of simple protein models with the hidden-force algorithm

    CERN Document Server

    Kolossváry, István

    2012-01-01

    We propose a new way of looking at global optimization of off-lattice protein models. We present a dual optimization concept of predicting optimal sequences as well as optimal folds. We validate the utility of the recently introduced hidden-force Monte Carlo optimization algorithm by finding significantly lower energy folds for minimalist protein models than previously reported. Further, we also find the protein sequence that yields the lowest energy fold amongst all sequences for a given chain length and residue mixture. In particular, for protein models with a binary sequence, we show that the sequence-optimized folds form more compact cores than the lowest energy folds of the historically fixed, Fibonacci-series sequences of chain lengths of 13, 21, 34, 55, and 89. We emphasize that while the protein model we used is minimalist, the methodology is applicable to detailed protein models, and sequence optimization may yield novel folds and aid de novo protein design.

  16. QUADRATIC OPTIMIZATION METHOD AND ITS APPLICATION ON OPTIMIZING MECHANISM PARAMETER

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yun; CHEN Jianneng; YU Yaxin; YU Gaohong; ZHU Jianping

    2006-01-01

    In order that the mechanism designed meets the requirements of kinematics with optimal dynamics behaviors, a quadratic optimization method is proposed based on the different characteristics of kinematic and dynamic optimization. This method includes two steps of optimization, that is, kinematic and dynamic optimization. Meanwhile, it uses the results of the kinematic optimization as the constraint equations of dynamic optimization. This method is used in the parameters optimization of transplanting mechanism with elliptic planetary gears of high-speed rice seedling transplanter with remarkable significance. The parameters spectrum, which meets to the kinematic requirements, is obtained through visualized human-computer interactions in the kinematics optimization, and the optimal parameters are obtained based on improved genetic algorithm in dynamic optimization. In the dynamic optimization, the objective function is chosen as the optimal dynamic behavior and the constraint equations are from the results of the kinematic optimization. This method is suitable for multi-objective optimization when both the kinematic and dynamic performances act as objective functions.

  17. Optimally segmented permanent magnet structures

    DEFF Research Database (Denmark)

    Insinga, Andrea Roberto; Bjørk, Rasmus; Smith, Anders

    2016-01-01

    We present an optimization approach which can be employed to calculate the globally optimal segmentation of a two-dimensional magnetic system into uniformly magnetized pieces. For each segment the algorithm calculates the optimal shape and the optimal direction of the remanent flux density vector...

  18. Duality based contact shape optimization

    DEFF Research Database (Denmark)

    Vondrák, Vít; Dostal, Zdenek; Rasmussen, John

    2001-01-01

    An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization.......An implementation of semi-analytic method for the sensitivity analysis in contact shape optimization without friction is described. This method is then applied to the contact shape optimization....

  19. Optimal Control of Reservoir Discharge Quality through Selective Withdrawal.

    Science.gov (United States)

    1982-02-01

    this report is to present a procedure for the solution of the dynamic-optimal reservoir regulation problem . -- TTARGET a0 • o T MELEASII JAN STATIC...output state as a function of the input state and the associated decisions; that is, y = g(x,d) The dynamic-optimal reservoir regulation problem can be

  20. Optimization methods applied to hybrid vehicle design

    Science.gov (United States)

    Donoghue, J. F.; Burghart, J. H.

    1983-01-01

    The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

  1. Optimal scheduling using priced timed automata

    DEFF Research Database (Denmark)

    Behrmann, Gerd; Larsen, Kim Guldstrand; Rasmussen, Jacob Illum

    2005-01-01

    This contribution reports on the considerable effort made recently towards extending and applying well-established timed automata technology to optimal scheduling and planning problems. The effort of the authors in this direction has to a large extent been carried out as part of the European...... projects VHS [20] and AMETIST [16] and are available in the recently released UPPAAL CORA [12], a variant of the real-time verification tool UPPAAL [18, 5] specialized for cost-optimal reachability for the extended model of so-called priced timed automata....

  2. Optimal scheduling using priced timed automata

    DEFF Research Database (Denmark)

    Behrmann, Gerd; Larsen, Kim Guldstrand; Rasmussen, Jacob Illum

    2005-01-01

    This contribution reports on the considerable effort made recently towards extending and applying well-established timed automata technology to optimal scheduling and planning problems. The effort of the authors in this direction has to a large extent been carried out as part of the European proj...... projects VHS [20] and AMETIST [16] and are available in the recently released UPPAAL CORA [12], a variant of the real-time verification tool UPPAAL [18, 5] specialized for cost-optimal reachability for the extended model of so-called priced timed automata....

  3. Cyclic Railway Timetable Optimization

    NARCIS (Netherlands)

    L.W.P. Peeters (Leon)

    2003-01-01

    textabstractCyclic Railway Timetable Optimization describes mathematical models and solution methods for constructing high quality cyclic railway timetables. In a cyclic timetable, a train for a certain destination leaves a certain station at the same time every cycle time, say every half an hour,

  4. Optimal Aging and Death

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan; Strulik, Holger

    the representative consumer is subject to physiological aging. In modeling aging we draw on recent research in the fields of biology and medicine. The speed of the aging process, and thus the time of death, are endogenously determined by optimal health investments. We calibrate the model to US data and proceed...

  5. Optimal Ski Jump

    Science.gov (United States)

    Rebilas, Krzysztof

    2013-01-01

    Consider a skier who goes down a takeoff ramp, attains a speed "V", and jumps, attempting to land as far as possible down the hill below (Fig. 1). At the moment of takeoff the angle between the skier's velocity and the horizontal is [alpha]. What is the optimal angle [alpha] that makes the jump the longest possible for the fixed magnitude of the…

  6. Optimal central bank transparency

    NARCIS (Netherlands)

    van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.

    2008-01-01

    Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the opt

  7. Optimal central bank transparency

    NARCIS (Netherlands)

    van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.H.

    2010-01-01

    Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the opt

  8. Towards Optimal Transport Networks

    Directory of Open Access Journals (Sweden)

    Erik P. Vargo

    2010-08-01

    Full Text Available Our ultimate goal is to design transportation net- works whose dynamic performance metrics (e.g. pas- senger throughput, passenger delay, and insensitivity to weather disturbances are optimized. Here the fo- cus is on optimizing static features of the network that are known to directly affect the network dynamics. First, we present simulation results which support a connection between maximizing the first non-trivial eigenvalue of a network's Laplacian and superior air- port network performance. Then, we explore the ef- fectiveness of a tabu search heuristic for optimizing this metric by comparing experimental results to the- oretical upper bounds. We also consider generating upper bounds on a network's algebraic connectivity via the solution of semidefinite programming (SDP relaxations. A modification of an existing subgraph extraction algorithm is implemented to explore the underlying regional structures in the U.S. airport net- work, with the hope that the resulting localized struc- tures can be optimized independently and reconnected via a "backbone" network to achieve superior network performance.

  9. Manufacturing tolerant topology optimization

    Institute of Scientific and Technical Information of China (English)

    Ole Sigmund

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded)or too thick (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization approach, under- and over-etching is modelled by image processing-based "erode" and "dilate" operators and the optimization problem is formulated as a worst case design problem. Applications of the method to the design of macro structures for minimum compliance and micro compliant mechanisms show that the method provides manufacturing tolerant designs with little decrease in performance. As a positive side effect the robust design formulation also eliminates the longstanding problem of one-node connected hinges in compliant mechanism design using topology optimization.

  10. Optimizing clozapine treatment

    DEFF Research Database (Denmark)

    Damkier, P; Lublin, H; Taylor, D

    2011-01-01

    Clozapine treatment remains the gold standard for treatment-resistant schizophrenia, but treatment with clozapine is associated with several side-effects that complicate the use of the drug. This clinical overview aims to provide psychiatrists with knowledge about how to optimize clozapine...... treatment. Relevant strategies for reducing side-effects and increasing the likelihood of response are discussed....

  11. Optimality-theoretic pragmatics

    NARCIS (Netherlands)

    Blutner, R.; Zeevat, H.; Benz, A; Blutner, R.

    2009-01-01

    The article aims to give an overview about the application of Optimality Theory (OT) to the domain of pragmatics. In the introductory part we discuss different ways to view the division of labor between semantics and pragmatics. Rejecting the doctrine of literal meaning we conform to (i) semantic un

  12. Danfoss: Scroll Optimization

    DEFF Research Database (Denmark)

    Gravesen, Jens; Henriksen, Christian; Howell, Peter

    1998-01-01

    The standard scroll compressor consists of two identical spirals (circle involutes) running inside each other.The task from Danfoss was to investigate how a change in the basic geometry of the scrolss and the orbit influence the compressor performnce and efficiency, and then try to optimize...

  13. Topology optimization approaches

    DEFF Research Database (Denmark)

    Sigmund, Ole; Maute, Kurt

    2013-01-01

    Topology optimization has undergone a tremendous development since its introduction in the seminal paper by Bendsøe and Kikuchi in 1988. By now, the concept is developing in many different directions, including “density”, “level set”, “topological derivative”, “phase field”, “evolutionary...

  14. Wind turbine pitch optimization

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Juelsgaard, Morten; Stoustrup, Jakob

    2011-01-01

    for maximizing power production while simultaneously minimizing fatigue loads. In this paper, we show how this problem can be approximately solved using convex optimization. When there is full knowledge of the wind field, numerical simulations show that force and torque RMS variation can be reduced by over 96...

  15. Electricity supply contracts: Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, G.; Vezzoni, M.; Grassani, E. (Sistemi Integrati per il Risparmio Energetico, Pavia (Italy) Necchi Compressori, Pavia (Italy))

    1991-10-01

    This paper presents a computer program, ACEE (Electrical Energy Consumption Analysis), developed to assist industrial firms in Italy to determine their electrical power consumption, optimize it through production process interventions, and then utilize the results to draft up optimum electricity supply contracts with ENEL (Italian National Electricity Board). The program also allows the user to properly budget future allocations for electricity costs.

  16. Optimization in liner shipping

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

    2017-01-01

    Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... research....

  17. Is Optimism Real?

    Science.gov (United States)

    Simmons, Joseph P.; Massey, Cade

    2012-01-01

    Is optimism real, or are optimistic forecasts just cheap talk? To help answer this question, we investigated whether optimistic predictions persist in the face of large incentives to be accurate. We asked National Football League football fans to predict the winner of a single game. Roughly half (the partisans) predicted a game involving their…

  18. Optimalization of IGBT Communication

    Directory of Open Access Journals (Sweden)

    Pavol Spanik

    2002-01-01

    Full Text Available The paper presents IGBT switch off process in order to reduce power loss in the structure. The soft switching method using switch-off after current reduction is used. Process mentioned above is optimized to minimize the power loss that is determined by experiment. Results obtained in the experiment can be helpful in a converter and controller design process.

  19. Fundamentals and Optimal Institutions

    DEFF Research Database (Denmark)

    Gonzalez-Eiras, Martin; Harmon, Nikolaj Arpe; Rossi, Martín

    2016-01-01

    of regulatory institutions such as revenue sharing, salary caps or luxury taxes. We show, theoretically and empirically, that these large differences in adopted institutions can be rationalized as optimal responses to differences in the fundamental characteristics of the sports being played. This provides...

  20. Optimizing Arteriovenous Fistula Maturation

    OpenAIRE

    2009-01-01

    Autogenous arteriovenous fistulas are the preferred vascular access in patients undergoing hemodialysis. Increasing fistula prevalence depends on increasing fistula placement, improving the maturation of fistula that fail to mature and enhancing the long-term patency of mature fistula. Percutaneous methods for optimizing arteriovenous fistula maturation will be reviewed.