WorldWideScience

Sample records for operation anwendung dynamischer

  1. IFRS 8 OPERATING SEGMENTS: Eine Untersuchung der erstmaligen Anwendung in der Schweiz

    OpenAIRE

    Meyer, C; Weiss, S

    2010-01-01

    Seit dem 1. Januar 2009 sind kotierte IFRS-Anwender verpflichtet, eine Segmentberichterstattung nach IFRS 8 zu erstellen. Anhand einer Analyse der Geschäftsberichte 2009 der an der SIX Swiss Exchange kotierten Unternehmen soll ein Überblick über die erstmalige Anwendung von IFRS 8 "Operating Segments" in der Schweiz gewonnen werden.

  2. Dynamic optimization of distribution networks. Closed loop operation results; Dynamische Optimierung der Verteilnetze. Closed loop Betriebsergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Ilo, Albana [Siemens AG, Wien (Austria); Schaffer, Walter; Rieder, Thomas [Salzburg Netz GmbH, Salzburg (Austria); Dzafic, Izudin [Siemens AG, Nuernberg (Germany)

    2012-07-01

    A holistic approach of power system control that includes all voltage levels from highest to low voltage is provided. The power grid is conceived as a supply chain. The medium voltage grid represents the central link. The implemented automatic voltage control and the dynamic operation optimization are based on Distribution System State Estimator (DSSE) and Volt/Var Control (VVC) applications. The last one realizes the dynamic optimization of distribution network combining the reactive power of the decentralized generation, capacitors and voltage set points of on-line tap changers. Application of this method has shown, that by using the dynamic voltage control the grid can be stable operated near the low voltage limit. The conservation voltage reduction can be applied in real time. Furthermore the integration of the decentralized generation is facilitated with minimal costs. Until now in this regard required network expansion can be prevented or delayed. (orig.)

  3. Development and application of dynamic MR-imaging for evaluation of perfusion changes in rectal carcinoma during a course of radiotherapy in clinical use. Preliminary results; Entwicklung und Anwendung dynamischer MRT-Messungen zur Evaluierung von Perfusionsveraenderungen bei Rektumkarzinomen unter Bestrahlung in der klinischen Routine. Erste Ergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Vries, A. de; Griebel, J.; Gneiting, T.; Hoflehner, J.; Brandl, M.; Lukas, P. [Leopold-Franzens-Univ. Innsbruck (Austria). Universitaetsklinik fuer Strahlentherapie - Radioonkologie; Judmaier, W.; Kremser, C.; Schocke, M.; Aichner, F. [Leopold-Franzens-Univ. Innsbruck (Austria). Inst. fuer Magnetresonanztomographie; Peer, S.; Rettl, G. [Leopold-Franzens-Univ. Innsbruck (Austria). Universitaetsklinik fuer Radiodiagnostik I; Oefner, D. [Leopold-Franzens-Univ. Innsbruck (Austria). Universitaetsklinik fuer Chirurgie; Debbage, P. [Leopold-Franzens-Univ. Innsbruck (Austria). Inst. fuer Histologie und Embryologie

    1999-11-01

    procedures. (orig.) [German] Ziel: Entwicklung und Anwendung dynamischer Magnetresonanztomographiemessungen zur Erhebung von Perfusionsparametern bei Rektumkarzinomen unter Bestrahlung in der klinischen Routine. Patienten und Methode: Bei Rektumkarzinompatienten (n=8), die sich einer praeoperativen kombinierten Radiochemotherapie unterzogen, wurden Perfusionsdaten erhoben. An einem 1,5-Tesla-Ganzkoerperkernspintomographen wurden ultraschnelle T1-Mapping-Sequenzen zum Erhalt von T1-Maps mit Intervallen von 14 und 120 Sekunden implementiert. Die Messzeit der dynamischen Messungen betrug 40 Minuten. Die Messschicht (Schichtdicke 5 mm) wurde so gewaehlt, dass sowohl Tumor als auch arterielle Gefaesse dargestellt wurden. Gadolinium-DTPA-(Gd-DTPA-)Konzentrations-Zeit-Kurven wurden nach einem prolongierten Bolus im arteriellen Blut und im Tumor berechnet. Die angewendete Methode erlaubte eine raeumliche Aufloesung von 2x2x5 mm und eine zeitliche Aufloesung von 14 Sekunden. Die Messdaten wurden vor und in konstanten Intervallen waehrend Therapie erhoben. Ergebnisse: Die raeumliche und zeitliche Aufloesung der T1-Maps war ausreichend, um Areale mit unterschiedlicher Kontrastmittelkinetik innerhalb des Tumors zu erfassen sowie die grossen Beckenarterien sicher zu identifizieren. Bei sechs Patienten konnten Gd-DTPA-Konzentrationskurven im Tumor unter Therapie erhoben werden. Der Perfusionsindex (Pi) versus Strahlendosis zeigte eine signifikante Zunahme in der ersten oder zweiten Woche der Bestrahlung, bevor er entweder kontinuierlich absank oder nach anfaenglichem Abfall einen erneuten Anstieg aufwies. Der durchschnittliche Pi-Ausgangswert betrug 0,16 ({+-}0,049), das durchschnittliche Pi-Maximum war 0,23 ({+-}0,058). Die relativen Perfusionsveraenderungen betrugen zwischen 20 und 83%. Schlussfolgerung: Unsere Ergebnisse zeigen, dass sich die verwendete Methode zur Erfassung von Perfusionsparametern unter Bestrahlung eignet und in der klinischen Routine anwendbar ist. In der Zukunft

  4. Konsensus zur Anwendung der "Tension-free Vaginal Tape" (TVT Operation bei der weiblichen Belastungsinkontinenz

    Directory of Open Access Journals (Sweden)

    Hanzal E

    2003-01-01

    Full Text Available Unter der Patronanz der Medizinischen Gesellschaft für Inkontinenzhilfe Österreich wurde im Juni 2002 in Wien die 2. Auflage eines Österreichischen Tension-free Vaginal Tape (TVT Konsensus-Meetings abgehalten. TVT ist eine neue Operationstechnik zur Behandlung der weiblichen Stressharninkontinenz, die seit 1998 in Österreich eingesetzt wird. Im Rahmen des Treffens, an dem Experten aus den Fachbereichen Urologie und Gynäkologie teilnahmen, wurde die vorhandene Fachliteratur analysiert und ein Konsensus für die präoperative Abklärung, Durchführung und postoperative Verlaufskontrolle als Basis für eine laufende Qualitätsverbesserung des Verfahrens erarbeitet, dessen Ergebnis in dem vorliegenden Papier als Leitlinie zusammengefaßt ist.

  5. Support of the operation of an agricultural biogas plants with dynamic simulation; Unterstuetzung des Betriebs einer landwirtschaftlichen Biogasanlage mit dynamischer Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Seick, Ingolf; Gebhardt, Sebastian [Hochschule Magdeburg-Stendal, Magdeburg (Germany). Fachbereich Wasser- und Kreislaufwirtschaft; Tschepetzki, Ralf [ifak system GmbH, Magdeburg (Germany)

    2012-07-01

    Mathematical models for the dynamic simulation can be useful for agricultural biogas plants, but are not state of the art. Presented in the following text is a dynamic simulation model of a typical plant. This is based on the Anaerobic Digestion Model No. 1 (ADM1) and parameterized and compared with relevant system data. The results were incorporated into the development of a system for the direct, model-based operational support of biogas plants. Integrated is an operation diary for data acquisition and a simulation system. It supports the biogas plant operation through analysis and evaluation of complex biological processes, forecasting (e.g. the gas yield) and optimization of biology in conjunction with the process technology. Based on the above biogas plant, a practical method and exemplary results of an automatic model adjustment will be shown and example forecasts for the stabilization of the biological process are presented. (orig.)

  6. Dynamic oxygen transfer measurements under operating conditions as a basis for the optimization of ventilation systems; Dynamische Sauerstoffeintragsmessungen unter Betriebsbedingungen als Grundlage zur Optimierung von Belueftungssystemen

    Energy Technology Data Exchange (ETDEWEB)

    Libra, J.A.; Biskup, M.; Wiesmann, U. [Technische Univ. Berlin (Germany). Inst. fuer Verfahrenstechnik; Sahlmann, C.; Gnirss, R. [Berliner Wasserbetriebe, Berlin (Germany)

    1999-07-01

    The largest single energy consumer at sewage treatment plants is the ventilation system of activated sludge tanks. This is why controlling and optimizing ventilation systems is the most appropriate approach to the cutting down of energy costs. The present paper reports on measurements of dynamic oxygen transfer by means of the off-gas method under operating conditions at the Berlin-Ruhleben sewage treatment plant. (orig.) [German] Der groesste Einzelenergieverbraucher auf Klaerwerken ist das Belueftungssystem von Belebungsbecken. Deshalb ist die Kontrolle und Optimierung der Belueftungssysteme der geeignete Weg zur Verringerung der Energiekosten. In diesem Beitrag wird ueber Messungen des dynamischen Sauerstoffeintrags mit der Abluft-Methode unter Betriebsbedingungen im Klaerwerk Berlin-Ruhleben berichtet. (orig.)

  7. Biologisch-dynamische Forschung zwischen "wissenschaftlicher Weltsicht" und "Ideologie"

    OpenAIRE

    Eysel, Georg

    2002-01-01

    Der Beitrag zeigt den Konflikt zwischen "wertefreier" Wissenschaft und "ganzheitlicher" Forschung auf. Ein Zusammenspiel bio-dynamischer Forschung und der Anthroposophie mit anderen Disziplinen könnte einen Beitrag zu einem neuen Wissenschaftsbegriff mit umfassender Weltanschauung leisten. Dialog, Verständnis, Toleranz, Offenheit, kritisches Hinterfragen und Mut zur sinnvollen Anpassung sind dafür notwendige Schritte.

  8. Dynamic traffic management and air quality; Dynamisch verkeersmanagement en luchtkwaliteit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-06-15

    Traffic flow can be improved by means of dynamic routing and regulation as a result of which traffic might choose a different route. Therefore, in this report also attention is paid to the effects on other road sections, such as improvement of the air quality. Calculations were carried out for the cases Southeast Amsterdam, Alkmaar and De Bilt. The detailed impacts on traffic and on air quality are available in the annex. All the reported air quality impacts are calculated using CAR II, version 8.0 for the year 2010. [Dutch] Doorstroming van het verkeer kan worden bevorderd door middel van dynamisch routeren en doseren. Het verkeer zal door deze maatregel een andere route gaan kiezen. Daarom besteedt de publicatie ook aandacht aan de effecten op de overige wegvakken, zoals verbetering van de luchtkwaliteit. Voor deze publikatie zijn berekeningen uitgevoerd voor de cases Amsterdam-zuidoost, Alkmaar en De Bilt. De gedetailleerde verkeerseffecten en effecten op luchtkwaliteit staan in de gratis beschikbare bijlage. Alle in deze rapportage opgenomen effecten op luchtkwaliteit zijn berekend met CAR II, versie 8.0 voor het jaar 2010.

  9. Klare Regeln - effiziente und effektive FMEA-Anwendung

    OpenAIRE

    Schloske, Alexander

    2014-01-01

    Der Vortrag beschreibt klare Regeln zur effizienten und effektiven FMEA-Anwendung. - Denkmodelle für die verschiedenen FMEA-Arten (System-FMEA, Konstruktions-FMEA, Prozess-FMEA) - Anwendungsbereiche und FMEA-Planung - Strukturierung von FMEAs - Funktionen, Produktmerkmale und Prozessmerkmale - Risikoanalyse - Maßnahmendefinition - Risikobewertung - Präsentation von FMEAs - FMEA als "lebendes Dokument".

  10. Identification of synthetic dynamic transfer-models and of their disturbances in the time-domain; Identifikation synthetischer dynamischer Uebertragungsmodelle und ihrer Stoerungen im Zeitbereich

    Energy Technology Data Exchange (ETDEWEB)

    Levenhagen, J.

    1998-12-31

    Schaetzverfahren aufgrund von Konditionsproblemen zu vergleichbaren Ergebnissen fuehrt und somit nicht gerechtfertigt ist. Zur automatischen Stoerungsidentifikation dient der verteilungsfreie Kolmogoroff-Smirnoff-Test, dessen Entscheidung sich mit Hilfe einer problemangepassten Qualitaetsregelkarte graphisch darstellen laesst. Die Leistungsfaehigkeit des vorgeschlagenen Konzepts wird schliesslich an generierten Signalen exemplarisch ueberprueft, bevor seine Anwendung auf ein reales System erfolgt. Aus geodaetischer Sicht bietet sich hierfuer speziell das dynamische System `Staumauer` aufgrund des hohen immanenten Komplexitaetsgrades an. (orig.)

  11. Entwicklung und Anwendung neuer NMR-Methoden: Orientierungsmedien zur Strukturbestimmung mit anisotropen Parametern und Metabonomics

    OpenAIRE

    Büchler, Silke

    2014-01-01

    Das Ziel dieser Arbeit war die Entwicklung und Anwendung neuer Orientierungsmedien zur Strukturbestimmung mit anisotropen Parametern, sowie die Etablierung von Metabonomics-Studien an Flüssigzellkulturen und Reispflanzen.

  12. Kowledge-based dynamic network safety calculations. Wissensbasierte dynamische Netzsicherheitsberechnungen

    Energy Technology Data Exchange (ETDEWEB)

    Kulicke, B [Inst. fuer Hochspannungstechnik und Starkstromanlagen, Berlin (Germany); Schlegel, S [Inst. fuer Hochspannungstechnik und Starkstromanlagen, Berlin (Germany)

    1993-06-28

    An important part of network operation management is the estimation and maintenance of the security of supply. So far the control personnel has only been supported by static network analyses and safety calculations. The authors describe an expert system, which is coupled to a real time simulation program on a transputer basis, for dynamic network safety calculations. They also introduce the system concept and the most important functions of the expert system. (orig.)

  13. Biological dynamic lighting in an office building; Biologisch dynamische verlichting in een kantoorgebouw

    Energy Technology Data Exchange (ETDEWEB)

    Visser, R. [Professional Lighting Designers' Association PLDA, Guetersloh (Germany)

    2011-12-15

    The aim of so-called biodynamic lighting systems is to influence human biological rhythms such that productivity, alertness, wellbeing and health are improved. In the office building of Grontmij in Amersfoort, Netherlands, experiments were carried out with biodynamic lighting systems. [Dutch] In de afgelopen jaren hebben verschillende fabrikanten biologisch dynamische verlichtingssystemen op de markt gebracht. Uitgangspunt voor dergelijke systemen is om biologische ritmen van de mens zodanig te beinvloeden dat productiviteit, alertheid, welbevinden en ook de gezondheid in meer of mindere mate verbeteren. Om ervaring in de kantooromgeving op te doen, is een aantal van deze systemen op diverse locaties in het gebouw van de Grontmij in Amersfoort aangebracht. Vervolgens is onderzoek gedaan naar de toepassingsmogelijkheden en eigenschappen ervan in de praktijk.

  14. KRISENZUSTÄNDE UND ANWENDUNG VON ZWANGSMASSNAHMEN IN DER PSYCHIATRIE

    Directory of Open Access Journals (Sweden)

    Vesna Šendula Jengić

    2017-01-01

    Full Text Available In der Arbeit wird über die Phänomene der Aggressivität und Gewalt bei Menschen diskutiert, wobei man besonderen Wert auf die Personen mit seelischen Störungen legt. Krisenzustände und Gewaltverhalten gibt es nicht nur in der Psychiatrie. Es kann immer zu einem solchem Zustand und Verhalten kommen und jeder kann unter bestimmten Umständen sowohl Opfer als auch Täter sein. Multikausalität und Komplexität sowie auch individuelle Umstände und situationsbezogene Faktoren, welche zum Gewaltverhalten führen können, haben nur geringen Prognosekraft. Statistische Indikatoren andererseits können falsch positive und falsch negative Ergebnisse verbergen, wobei ein Fehler in der Einschätzung das Risiko zum Erscheinen eines Verhaltens drastisch erhöhen oder zum unrechtfertigten Entziehung der Freiheit führen kann. Zwangsmaβnahmen in der Psychiatrie sind nur ausnahmsweise anzuwenden, und zwar, wenn ein gefährliches Verhalten direkt das Leben und die Gesundheit einer Person oder einer Umgebung gefährdet. Darüber hinaus ist die Dauer von Zwangsmaβnahmen auch beschränkt. Die Gesetzesregulative, insbesondere das Gesetz über den Schutz von Personen mit seelischen Störungen (Amtsblatt der Republik Kroatien Nr. 76/2014 und die Ordnung über die Arten und die Weise der Anwendung von Zwangsmaβnahmen gegenüber den Personen mit schwierigen seelischen Störungen (Amtsblatt der Republik Kroatien Nr. 16/2015, dient als zusätzlicher Schutz der Rechte dieser Patientengruppe und schreibt die Arten und die Weise der Anwendung von Zwangsmaβnahmen sowie auch die Vorgehensweise. Zusätzliche Richtlinien und Vorgehensstrategien wurden auch von den Gesellschaften für Psychiatrie gegeben. In der Arbeit wird betont, dass bessere Bedingungen, Infrastruktur und Arbeitskräfte sowie auch ständige Entwicklung und Bewertung der Arbeitsqualität in der Psychiatrie erforderlich sind. Abschlieβend werden Standards und ethische Fragen in Betracht gezogen, wie

  15. Ecoflex. Dynamic traffic management based on measured air quality; Ecoflex. Dynamisch verkeersmanagement op basis van gemeten luchtkwaliteit

    Energy Technology Data Exchange (ETDEWEB)

    Voogt, M.; Van Baalen, J.; Stelwage, U.; Weststrate, H. [TNO Urban Environment and Safety, Delft (Netherlands); De Koning, A.; Turksma, S. [Peek Traffic, Amersfoort (Netherlands)

    2012-02-15

    Local air quality measurements can be used as input for a dynamic traffic management system. This makes it possible to deploy emission reducing measures exactly when they are needed. This concept has been demonstrated by TNO and Peek in the EcoFLEX project. [Dutch] Lokale luchtkwaliteitsmetingen kunnen worden gebruikt als input voor een dynamisch verkeersmanagementysteem. Zo wordt het mogelijk om emissiereducerende maatregelen juist dan in te zetten wanneer deze nodig zijn. Dit concept is door TNO en Peek gedemonstreerd in het EcoFLEX-project.

  16. Dynamic interaction of brakes, tyres and road surface; Dynamische Interaktion Bremse - Reifen - Strasse

    Energy Technology Data Exchange (ETDEWEB)

    Huinink, H.; Schroeder, C.

    1999-12-01

    Rubber friction of rough surfaces is characterised by the molecular physics of the highly dynamic interaction between a polymer network and the road on nano- micrao- and macroscale length. The problems of power transmission of ALS-controlled tyres at quasi-stationary conditions (interaction tyres/braking system) are described by the grip/slip characteristics defined for the area of tyre contact, which in terms forms the basis for the interaction between material and road surface (according to Persson 1997) under the respective technical conditions of the vehicle. ALS-braking with time-dependent brake torque is a technically highly dynamic system state within the interaction of material, tyres, vehicle and road surface. New systems based on sensors such as the side-torsion-sensor made by Continental AG improve safety, comfort and economy by combining this feature with a vehicle management system which uses tyre forces and -deformation as input parameters. [Deutsch] Die Gummireibung auf rauhen Oberflaechen ist durch eine molekulare Physik der hochdynamischen Interaktion Polymernetzwerk / Fahrbahn auf nano-, mikro- und makroskaligen Laengen gekennzeichnet. Die Problematik der Kraftuebertragung bei ABS-geregelten Reifen unter quasistationaeren Bedingungen (Interaktion Reifen - Bremssystem) wird durch die in der Bodenaufstandsflaeche ortsaufgeloesten Kraftschluss - Schlupf - Kennlinien erfasst, deren Basis die Interaktion Material / Fahrbahn nach Persson (1997) unter den gegebenen technischen Bedingungen am Fahrzeug darstellt. Der ABS-Bremsvorgang bei zeitabhaengigem Bremsmoment ist ein technisch hochdynamischer Systemzustand im Wechselspiel Material - Reifen - Fahrzeug-Fahrbahn. Auf der Sensorik basierende dynamische Systemerweiterungen, wie z.B. durch den Seitenwand-Torsions-Sensor der Continental AG, verbessern Fahrsicherheit, Komfort und Wirtschaftlichkeit durch die Kombination mit einem Fahrzeugmanagementsystem, das die Reifenkraefte und -verformungen als

  17. The integrity concept and its implementation; Das Integritaetskonzept und seine praktische Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Herter, K.H.; Schuler, X. [Stuttgart Univ. (Germany). MPA; Koenig, G. [EnBW Kernkraft GmbH, Neckarwestheim (Germany)

    2008-07-01

    The safety of nuclear power plants is mainly based on the assumption that operational and accidental loads on mechanical components and systems that must not fail due to their safety relevant importance can be controlled. This implies that the respective quality is available and assured over the complete projected lifetime. In this context the term ''break preclusion'' is often used which is commonly defined as the ''leak-before-break'' demonstration based on fracture mechanical analysis in connection with fulfilled basic safety for design and manufacture. Usually it is not taken into account that for guaranteed break preclusion the controllability of any possible operational damage mechanism is of crucial importance. On the contrary, the integrity concept as implementation of the basic safety concept taking into account the particular plant-specific preconditions constitutes a closed master plan that accommodates for the necessity of a multi-level safeguarding and continuous actualization. The integrity concept is part of the aging management for mechanical components and systems. The practical implementation of this concept for integrity confirmation is demonstrated for the case of the feed water lines within the containment of the NPP GKN1. [German] Die Sicherheit von Kernkraftwerken basiert wesentlichen darauf, dass die aus betrieblichen Belastungen und aus postulierten Stoerfallen resultierenden Beanspruchungen mechanischer Komponenten und Systeme, die entsprechend ihrer sicherheitstechnischen Bedeutung nicht versagen duerfen, sicher beherrscht werden koennen. Dies setzt voraus, dass die hierzu erforderliche Qualitaet ueber die gesamte Betriebszeit zur Verfuegung steht. Oft wird in diesem Zusammenhang der Begriff ''Bruchausschluss'' verwendet, unter dem haeufig ausschliesslich der ''Leck-vor-Bruch''-Nachweis durch eine bruchmechanische Analyse in Verbindung mit einer basissicheren Auslegung und Herstellung verstanden wird. Dabei wird nicht beruecksichtigt

  18. Hydrogen in motor car engineering. Production, storage, uses; Wasserstoff in der Fahrzeugtechnik. Erzeugung, Speicherung, Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Eichlseder, H.; Klell, M.

    2008-07-01

    The book presents a general outline of the various aspects of properties, production, storage and application of hydrogen at university level. The focus is on the thermodynamic aspects of hydrogen storage andon its applications in transportation and power supply. In particular, car engines and fuel cells are gone into, and the state of the art is outlined with reference to research projects of TU Graz university and HyCentA. Apart from the technical aspects, also the history and possible future trends are presented. [German] Dieses Buch bietet einen allgemeinen Ueberblick ueber die verschiedenen Aspekte von Eigenschaften, Erzeugung, Speicherung und Anwendung von Wasserstoff auf Hochschulniveau. Schwerpunkte liegen auf der Thermodynamik der Speicherung von Wasserstoff sowie auf der Anwendung in der Verkehrstechnik und in der Energietechnik. Speziell wird die Anwendung in der Verbrennungskraftmaschine und in der Brennstoffzelle behandelt, wobei mit Bezug auf Forschungsvorhaben an der TU Graz und dem HyCentA der aktuelle Stand der Technik fundiert dargestellt wird. Neben einer technischen Vertiefung werden auch die geschichtliche und die moegliche kuenftige Entwicklung angesprochen.

  19. Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Jorde, K.

    1997-12-31

    The study was intended to develop a model versatile enough to permit quantification of various water demand scenarios in connection with operation of riverine hydroelectric power plants. Specific emphasis was to be placed on defining the minimum instream flow to be maintained in river segments because of the elementary significance to flowing water biocinoses. Based on fictitious minimum water requirements, various scenarious were simulated for flow regimes depending on power plant operation, so as to establish a system for comparative analysis and evaluation of resulting economic effects on power plant efficiency on the one hand, and the ecologic effects on the aquatic habitat. The information derived was to serve as a basis for decision-making for regulatory purposes. For this study, the temporal and spatial variability of the flow regime at the river bed in a river segment was examined for the first time. Based on this information, complemented by information obtained from habitat simulations, a method was derived for determination of ecologic requirements and their incorporation into regulatory water management provisions. The field measurements were carried out with the FST hemisphere as a proven and most efficient and reliable method of assessing flow regimes at river beds. Evaluation of the measured instream flow data characterising three morphologically different segments of diverted rivers was done with the CASIMIR computer code. The ASS models derived were used for comparative assessment of existing regulatory provisions and recommended amendments determining required minimum instream flow in diverted rivers. The requirements were defined taking as a basis data obtained for three different years. (orig./CB) [Deutsch] Ziel der Arbeit war die Entwicklung eines Modellverfahrens, das flexibel die Quantifizierung unterschiedlicher Nutzansprueche an Laufwasserkraftanlagen ermoeglicht. Insbesondere der Erhalt einer gewissen Dynamik, die fuer

  20. Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Jorde, K

    1998-12-31

    The study was intended to develop a model versatile enough to permit quantification of various water demand scenarios in connection with operation of riverine hydroelectric power plants. Specific emphasis was to be placed on defining the minimum instream flow to be maintained in river segments because of the elementary significance to flowing water biocinoses. Based on fictitious minimum water requirements, various scenarious were simulated for flow regimes depending on power plant operation, so as to establish a system for comparative analysis and evaluation of resulting economic effects on power plant efficiency on the one hand, and the ecologic effects on the aquatic habitat. The information derived was to serve as a basis for decision-making for regulatory purposes. For this study, the temporal and spatial variability of the flow regime at the river bed in a river segment was examined for the first time. Based on this information, complemented by information obtained from habitat simulations, a method was derived for determination of ecologic requirements and their incorporation into regulatory water management provisions. The field measurements were carried out with the FST hemisphere as a proven and most efficient and reliable method of assessing flow regimes at river beds. Evaluation of the measured instream flow data characterising three morphologically different segments of diverted rivers was done with the CASIMIR computer code. The ASS models derived were used for comparative assessment of existing regulatory provisions and recommended amendments determining required minimum instream flow in diverted rivers. The requirements were defined taking as a basis data obtained for three different years. (orig./CB) [Deutsch] Ziel der Arbeit war die Entwicklung eines Modellverfahrens, das flexibel die Quantifizierung unterschiedlicher Nutzansprueche an Laufwasserkraftanlagen ermoeglicht. Insbesondere der Erhalt einer gewissen Dynamik, die fuer

  1. Static-dynamic MR urography. Comparison with excretory urography and scintigraphy in experimentally induced urinary tract obstruction (UTO); Statisch-dynamische MR-Urographie. Vergleich mit Ausscheidungsurographie und Szintigraphie bei experimentell induzierter Harntransportstoerung (HTS)

    Energy Technology Data Exchange (ETDEWEB)

    Rohrschneider, W.K.; Wunsch, R.; Troeger, J. [Paediatrische Radiologie, Univ. Heidelberg (Germany); Hoffend, J. [Nuklearmedizinische Klinik, Univ. Heidelberg (Germany); Becker, K. [Inst. fuer Versuchstierkunde, Univ. Heidelberg (Germany); Darge, K.; Clorius, J.H. [Kooperationseinheit Nuklearmedizin, Deutsches Krebsforschungszentrum, Heidelberg (Germany); Kooijman, H. [Philips Medizin-Systeme, Hamburg (Germany)

    2001-02-01

    Purpose: To assess the diagnostic value of combined static-dynamic MR urography (MRU) for the functional-morphological evaluation of experimentally induced urinary tract obstruction. Methods: Static-dynamic MRU - combination study with a respiratory-triggered 3D-IR-TSE sequence and a dynamic 2D-FFE sequence after Gd-DTPA and furosemide - was obtained in comparison with {sup 99m}Tc-MAG3 diuretic renal scintigraphy (DRS), excretory urography (EU) and ultrasound (US) in 29 healthy piglets and in 20 piglets with surgically induced ureteric stenosis (total of 50 postoperative examination blocks). Results: MRU allowed complete depiction of the urinary tract in all controls, in operated piglets the stenosis was always correctly identified. Quality of MRU was superior to EU in 36 to 43 comparative studies. Calculation of single kidney function from parenchymal renograms, and assessment of urinary excretion from whole-kidney renograms resulted in a highly significant agreement of MRU with DRS. Conclusion: Static-dynamic MR urography allows excellent depiction of experimentally induced urinary tract obstruction, and reliable assessment of individual renal function and urinary excretion. Two advantages of the method stand out, it does not require radiation and it permits a functional-morphological correlation. (orig.) [German] Ziel: Einschaetzung der Wertigkeit der kombinierten statisch-dynamischen MR-Urographie (MRU) zur umfassenden funktionell-morphologischen Diagnostik tierexperimentell induzierter Harntransportstoerungen. Methodik: Die statisch-dynamische MRU-Kombination aus einer atemgetriggerten 3D-IR-TSE-Sequenz und einer dynamischen 2D-FFE-Sequenz nach Gd-DTPA und Furosemid - wurde im Vergleich zu {sup 99m}Tc-MAG3-Diurese-Nierenszintigraphie (DNS), Ultraschall (US) und Ausscheidungsurographie (AUG) bei 29 gesunden Ferkeln sowie bei 20 Ferkeln mit operativ indizierter Harnwegsstenose (insgesamt 50 postoperative Untersuchungsbloecke) durchgefuehrt. Ergebnisse: Die MRU

  2. Anwendung stabiler Isotope zur Beschreibung des mikrobiellen Abbaus organischer Schadstoffe in kontaminierten Aquiferen

    OpenAIRE

    Vieth, Andrea

    2003-01-01

    Der mikrobielle in-situ Abbau organischer Schadstoffe ist mit einer Änderung der Isotopenverhältnisse (12C/13C; H/D) verbunden. Das Ausmaß der Isotopenfraktionierung ist abhängig von der initialen biochemischen Reaktion und variiert mit der Größe des Substratmoleküls bzw. der Anzahl der Kohlenstoff- bzw. Wasserstoffatome. Für die Anwendung dieses Isotopenkonzepts zur Beschreibung des mikrobiellen Abbaus von Schadstoffen im Grundwasser muss ausgeschlossen werden können, dass andere Prozesse ei...

  3. Smoothed Bootstrap und seine Anwendung in parametrischen Testverfahren

    Directory of Open Access Journals (Sweden)

    Handschuh, Dmitri

    2015-03-01

    Full Text Available In empirical research, the distribution of observations is usually unknown. This creates a problem if parametric methods are to be employed. The functionality of parametric methods relies on strong parametric assumptions. If these are violated the result of using classical parametric methods is questionable. Therefore, modifications of the parametric methods are required, if the appropriateness of their assumptions is in doubt. In this article, a modification of the smoothed bootstrap is presented (using the linear interpolation to approximate the distribution law suggested by the data. The application of this modification to statistical parametric methods allows taking into account deviations of the observed data distributions from the classical distribution assumptions without changing to other hypotheses, which often is implicit in using nonparametric methods. The approach is based on Monte Carlo method and is presented using one-way ANOVA as an example. The original and the modified statistical methods lead to identical outcomes when the assumptions of the original method are satisfied. For strong violations of the distributional assumptions, the modified version of the method is generally preferable. All procedures have been implemented in SAS. Test characteristics (type 1 error, the operating characteristic curve of the modified ANOVA are calculated.

  4. Evaluation von Bildungssoftware im Spannungsfeld von Objektivität und praktischer Anwendung

    Directory of Open Access Journals (Sweden)

    Cornelia Biffi

    2002-05-01

    Full Text Available Das Angebot an Bildungs- bzw. Lernsoftware umfasst eine breite Palette von sehr unterschiedlichen Produkten. Eigentliche Unterrichtssoftware, die speziell für den Unterricht hergestellt und auf Lehrmittel und Curriculum abgestimmt ist, gibt es kaum. Im Projekt «Lernsoftware Evaluation» des Pestalozzianums Zürich ermitteln Lehrpersonen die Qualität von Bildungssoftware, indem sie diese im Unterricht einsetzen und anhand eines Kriterienrasters beurteilen. Eine Analyse der in der Evaluation generierten Daten belegt die Problematik des Anspruchs einer objektiven Qualitätsbeurteilung. Es werden die Probleme bei der Anwendung von Kriterienraster und Beurteilungsmodus aufgezeigt und ermittelt, worin die subjektiven Qualitätsmassstäbe der Evaluierenden begründet sind. Diese Ausführungen sind Teil eines Forschungsprojekts für die Weiterentwicklung einer theoretisch fundierten, aber dennoch praxisnahen Evaluation von Bildungssoftware.

  5. Dynamic simulation of urban hybrid electric vehicles; Dynamische Simulation von Stadthybridfahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    Winke, Florian; Bargende, Michael [Stuttgart Univ. (Germany). Inst. fuer Verbrennungsmotoren und Kraftfahrwesen (IVK)

    2013-09-15

    As a result of the rising requirements on the development process of modern vehicles, simulation models for the prediction of fuel efficiency have become an irreplaceable tool in the automotive industry. Especially for the design of hybrid electric drivetrains, the increasingly short development cycles can only be met by the use of efficient simulation models. At the IVK of the University of Stuttgart, different approaches to simulating the longitudinal dynamics of hybrid electric vehicles were analysed and compared within the presented project. The focus of the investigations was on urban operation. The objective was to develop a hybrid vehicle concept that allows an equitable comparison with pure battery electric vehicles. (orig.)

  6. Car spring by natural gas. Dynamic, economical, proper; Mit Erdgas in den Autofruehling. Dynamisch, wirtschaftlich, sauber

    Energy Technology Data Exchange (ETDEWEB)

    Holtmeier, Gerhard [Initiativkreis Erdgas als Kraftstoff - Deutschland e.V., Leipzig (Germany); VNG - Verbundnetz Gas AG, Leipzig (Germany)

    2009-06-02

    Natural gas passenger cars are cruising into the spring of automotive year 2009. Rolling off the production lines since March the world's first mass-produced natural gas turbo vehicles have rung in the era of natural gas powered mobility. They reconcile the joy of driving with economy and environmental friendliness. Apart from being fit for everyday use they also do their job in motor sports, as demonstrated by two tuned natural-gas powered VW Scirocco cars that participated in the 24-hour race on the Nuerburg Ring in late May. To bring momentum to the market is also the task of ''erdgas mobil'', a newly founded sales company for natural gas and natural gas powered vehicles, which started operations in April of 2009.

  7. Dynamic evaluation of the effects of quality management; Dynamische Evaluierung der Effekte von Qualitaetsmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Salomonowitz, E.; Stadlbauer, A. [Zentrales Institut fuer Radiologie, Diagnostik und Interventionelle Therapie, Landesklinikum St. Poelten (Austria); Strunk, G. [Forschungsinstitut fuer Gesundheitsmanagement und Gesundheitsoekonomie, Wirtschaftsuniversitaet Wien (Austria); Duerselen, L. [DxD Consulting, Dogern (Germany); Guentert, B. [Institut fuer Management und Oekonomie im Gesundheitswesen, UMIT - Universitaet fuer Gesundheitswissenschaften, Medizinische Informatik und Technik, Hall/ Tirol (Austria)

    2008-09-15

    Purpose: Evaluation of the effects of quality management over time at a radiology department. Materials and Methods: Data concerning the performance of the department, entered on a monthly basis, will be compared with entries in the error report system on the basis of time series analysis (regression models taking seasons and auto-correlation effects into account). The observation period consists of 46 homogeneous monthly time pulses. Results: Effects of the suggestions and the total number of reports in the quality assurance system on the performance of the department can be observed with a two-month delay. This association is statistically highly significant (p<0.01) and, because of the procedures used, not attributable to general developmental trends, seasonal fluctuations or autoregressive processes. Conclusion: Evaluation of quality assurance measures is a well justified demand and should be based on the analysis of data collected from quality assurance systems operating on a continuous basis over a long period of time. The analysis of data from a radiology department shows that quality assurance is reflected in the performance of the department.

  8. Application of C-arm computed tomography in cardiology; Kardiale Anwendung der C-Arm-Computertomographie

    Energy Technology Data Exchange (ETDEWEB)

    Rieber, J. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Innenstadt, Abteilung fuer Kardiologie, Medizinische Poliklinik, Muenchen (Germany); Rohkohl, C. [Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Lehrstuhl fuer Mustererkennung, Department Informatik, Erlangen (Germany); Siemens AG, Healthcare Sector, Forchheim, Forchheim (Germany); Lauritsch, G. [Siemens AG, Healthcare Sector, Forchheim, Forchheim (Germany); Rittger, H. [Krankenhaus Coburg, Abteilung fuer Kardiologie, Coburg (Germany); Meissner, O. [Siemens AG, Healthcare Sector, Forchheim, Forchheim (Germany); Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Institut fuer Klinische Radiologie, Muenchen (Germany)

    2009-09-15

    C-arm computed tomography is currently being introduced into cardiac imaging and offers the potential for three-dimensional imaging of the cardiac anatomy within the interventional environment. This detailed view is necessary to support complex interventional strategies, such as transcutaneous valve replacement, interventional therapy of atrial fibrillation, implantation of biventricular pacemakers and assessment of myocardial perfusion. Currently, the major limitation of this technology is its insufficient temporal resolution which limits the visualization of fast moving parts of the heart. (orig.) [German] Durch die Entwicklung der C-Arm-Computertomographie- (CACT-)Angiographie ist es erstmals moeglich, waehrend einer Herzkatheteruntersuchung eine detaillierte dreidimensionale Darstellung der kardialen Anatomie zu erhalten. Derartige zusaetzliche Informationen koennten die Durchfuehrung der immer komplexer werdenden Strategien der interventionellen Kardiologie wirkungsvoll unterstuetzen. Hierzu zaehlen u. a. der transkutane Klappenersatz, die interventionelle Behandlung von Vorhofflimmern, die Implantation biventrikulaerer Schrittmacher sowie die Beurteilung der Myokardperfusion. Die derzeit groesste Limitation dieser Methode ist die relativ geringe zeitliche Aufloesung, die aufgrund der Bewegung des Herzens die Anwendung dieser Technologie einschraenkt. (orig.)

  9. Biofuels - Properties and application experience; Biokraftstoffe - Eigenschaften und Erfahrungen bei der Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Schmiedel, H.P.

    2002-12-01

    The European Union wants to promote the use of renewable raw materials also in the traffic sector in order to meet the internationally committed reduction of carbon dioxide emissions. At the same time a new market shall be created for farming and jobs shall be secured. Fatty acid methyl esters in the diesel market and ethanol and ethyl tertiary butyl ether (ETBE) in gasoline are discussed as compounds that can be produced from renewable raw materials and be applied as fuels in the short term. This literature survey deals with the extent of CO{sub 2} / greenhouse gas emission reductions, the availability of biofuels and summarizes the economical and technical experiences obtained so far with their application. The use of pure vegetable oils, dimethylether and pyrolysis oil is also briefly covered. (orig.) [German] Die EU will auch im Verkehrsbereich den Einsatz nachwachsender Rohstoffe foerdern, um die international zugesagte Reduzierung der Kohlendioxid-Emissionen zu erreichen. Gleichzeitig sollen damit der Landwirtschaft ein neuer Markt eroeffnet und Arbeitsplaetze gesichert werden. Fettsaeuremethylester fuer den Dieselbereich sowie Ethanol und Ethyltertiaerbutylether (ETBE) fuer Ottokraftstoff werden als Verbindungen genannt, die aus nachwachsenden Rohstoffen gewonnen und kurzfristig als Kraftstoff eingesetzt werden koennen. Die vorliegende Literaturstudie beleuchtet den Umfang der CO{sub 2}- bzw. Klimagasreduktion, die Verfuegbarkeit der Biokraftstoffe und fasst die oekonomischen und technischen Erfahrungen zusammen, die bisher in ihrer Anwendung erhalten wurden. Die Nutzung von reinen Pflanzenoelen, Dimethylether und Pyrolyseoel wird gestreift. (orig.)

  10. Methandiid-basierte Cabenkomplexe: Von ihrer Synthese und elektronischen Struktur zur Anwendung in Bindungsaktivierungsreaktionen und katalytischen Umsetzungen

    OpenAIRE

    Weismann, Julia

    2015-01-01

    Die vorliegende Arbeit beschäftigt sich mit der Anwendung des Sulfonyl-stabilisierten Methandiids 20-Li2 als Ligand in Übergangsmetallkomplexen. Dabei konnte 20-Li2 mit ver-schiedenen Übergangsmetallhalogeniden in Salzmetathesereaktionen umgesetzt werden. Insgesamt wiesen die synthetisierten Methandiid-basierten Komplexe flexible Bindungsverhältnisse bezüglich der MC-Bindung und unterschiedliche Koordinationsmodi der Sulfonyl-Gruppe auf, die die Stabilität und Reaktivität der Komplexe signif...

  11. Hydrogen in motor car engineering. Production, storage, use. 3. rev. ed.; Wasserstoff in der Fahrzeugtechnik. Erzeugung, Speicherung, Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Eichlseder, Helmut [Technische Univ., Graz (Austria). Inst. fuer Verbrennungskraftmaschinen und Thermodynamik; Klell, Manfred [HyCentA Research GmbH, Graz (Austria)

    2012-07-01

    The book outlines the various aspects of properties, generation, storage and uses of hydrogen. The focus is on the thermodynamics of hydrogen storage and on its applications in vehicle engineering and energy engineering. Using the example of current research projects of TU Graz university and HyCentA, the state of the art is presented in some detail. The sections on fuel cells for automotive power generation, hydrogen/methane mixtures and legal and safety aspects have been updated. [German] Dieses Buch bietet einen allgemeinen Ueberblick ueber die verschiedenen Aspekte von Eigenschaften, Erzeugung, Speicherung und Anwendung von Wasserstoff. Schwerpunkte liegen auf der Thermodynamik der Speicherung von Wasserstoff sowie auf der Anwendung in der Fahrzeugtechnik und in der Energietechnik. Mit Bezug zu Forschungsvorhaben an der TU Graz und dem HyCentA wird der aktuelle Stand der Technik fundiert dargestellt. Aktualisiert und ergaenzt wurden vor allem die Abschnitte ueber Brennstoffzellen zur Stromerzeugung fuer Elektroantriebe, ueber Gemische aus Wasserstoff und Methan sowie ueber Fragen von Recht und Sicherheit.

  12. The influence of dynamic analyses on the development of modern wind power plant bearings; Der Einfluss dynamischer Analysen auf die Entwicklung moderner Lagerungskonzepte fuer WKA's

    Energy Technology Data Exchange (ETDEWEB)

    Goebel, Werner [SKF GmbH, Schweinfurt (Germany)

    2003-07-01

    In Wind-Kraft-Journal 3-/2003, the various possibilities of analyzing dynamic processes in wind power systems were presented, using the example of the main gear. This contribution now focuses on shaft displacement in axial direction, which enhances the possibility of axial sliding of the rolling elements. SKF, one of the main producers of bearings, always took care to analyze both types of analysis in the design of momentum bearing concepts. The results showed that higher stiffness is achieved ideally with a two-row tapered roller concept combined with a flexible cage and a pressure angle up to 45 degree. (orig.) [German] Im Wind-Kraft-Journal Ausgabe 3/2003 wurden am Beispiel des Hauptgetriebes verschiedene Moeglichkeiten der Analyse dynamischer Vorgaenge in Windkraftanlagen vorgestellt. Anhand des Phaenomens Drehmomentenumkehr, welche in WKA nachgewiesen ist, wurde aufgezeigt, wie sich die Lastuebertragung in den Waelzlagern veraendert und die Wellen zu einander verschieben. Diese Relativbewegungen werden mit zunehmender Elastizitaet der gesamten Konstruktion und mit zunehmendem Lagerspiel groesser. Aufgrund der traegen Massen der bewegten Bauteile erzeugen die Wellenverschiebungen unerwuenschte Zusatzlasten fuer die Waelzlager. Der groesste Anteil der Wellenverschiebungen erfolgt in axialer Richtung. Damit steigt bei Rollenlargern die Wahrscheinlichkeit des Auftretens von Verschleiss erzeugendem axialen Gleiten der Waelzkoerper. SKF hat von Anfang an bei der Auslegung von Momentenlagerkonzepten beide Analysemethoden eingesetzt. Die Ergebnisse haben gezeigt, dass die oben genannten Massnahmen zur Erhoehung der Lagersteifigkeit ideal mittels eines Lagerdesigns auf Basis eines zweireihigen Kegelrollenlagers in Verbindung mit einem flexiblen Kaefig und einem Druckwinkel bis 45 realisiert werden koennen. (orig.)

  13. Application of the EC pressure equipment directive in the gas industry; Die Anwendung der EG-Druckgeraeterichtlinie in der Gaswirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Bueschel, K. [Deutscher Verein des Gas- und Wasserfaches e.V., Bonn (Germany); John, M. [Karlsruhe Univ. (T.H.) (Germany). DVGW-Forschungsstelle am Engler-Bunte-Institut; Wasser, U. [Bundesverband der Deutschen Gas- und Wasserwirtschaft e.V., Bonn (Germany)

    2000-07-01

    The EC Pressure Equipment Directive primarily concerns that broad range of equipment that falls under the Equipment Safety Act and its regulations on pressure vessels, boilers etc. Meanwhile, however, the mainstream view is that also some equipment of the gas industry is affected although its pipeline systems have been excluded from the Directive. The interpretation of the Directive must take into account this background in order to reach satisfactory conclusions in the actual application of the Directive to the components of the gas industry. (orig.) [German] Die EG-Druckgeraeterichtlinie betrifft primaer jenes grosse Geraetespektrum, das unter das Geraetesicherheitsgesetz und dessen Verordnungen zu Druckbehaeltern, Dampfkesseln etc. faellt. Inzwischen herrscht jedoch die Meinung vor, dass auch bestimmte Anlagenteile der Gaswirtschaft erfasst werden, obwohl deren Rohrleitungssysteme von der Richtlinie ausgenommen worden sind. Die Auslegung der Richtlinie muss diesen Hintergrund beachten, um zu befriedigenden Aussagen bei ihrer konkreten Anwendung auf die Komponenten der Gaswirtschaft zu gelangen. (orig.)

  14. PEM-fuel cells for mobile application. Sub task: development of electrocatalysts. Final report; PEM-Brennstoffzelle fuer mobile Anwendung. Teilprojekt: Katalysatorenentwicklung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Starz, K A

    1999-01-01

    PEM fuel cells are gaining increasing importance for use in automotive application. The goal of the research program reported here was to develop the basic technology and components for PEMFC stacks for use in transport applications. The sub-task of Degussa was to develop improved electrocatalysts for PEMFC single cells and stacks. The technical objectives of the research project were met. Electrocatalysts, characterized by a high Pt-dispersion, high surface area and excellent activity, were developed. With this material, considerable progress was made to reduce the total platinum loading of PEMFC cells and stacks to about 0,5 mgPt/cm{sup 2}. With this value, the goal of the program (<0,8 mg/cm{sup 2}) was significantly surpassed. Additionally, higher power densities of >0.4 W/cm{sup 2} were achieved at Degussa for hydrogen/air and reformate/air operation of the PEMFC. A CO-tolerant anode electrocatalyst, exhibiting a CO-tolerance of up to 100 ppm CO, enables the operation of PEMFC stacks with on-board generated methanol reformate. The performance of the new electrocatalyst materials was verified by DaimlerChrysler in a PEMFC demonstration stack at the end of the program. (orig.) [Deutsch] PEM-Brennstoffzellen gewinnen fuer die mobile Anwendung immer mehr an Bedeutung. Im Rahmen des hier beschriebenen Leitprojektes sollten die Basistechnologien fuer den Einsatz der PEM-Brennstoffzelle im mobilen Bereich (Elektrotraktion) entwickelt werden. Das Teilprojekt der Degussa befasst sich mit der Entwicklung von verbesserten Elektrokatalysatoren fuer PEM-Brennstoffzellenstacks. Die technischen Arbeitsziele des Vorhabens wurden erreicht. So konnten Elektrokatalysatoren bereitgestellt werden, die sich durch eine hohe Pt-Dispersion, eine grosse Pt-Oberflaeche sowie eine sehr gute Aktivitaet auszeichnen. Mit diesen Elektrokatalysatoren gelang es, die Platinbeladung der PEM-Elektroden (Anode und Kathode) erheblich abzusenken. Mit einer Gesamtplatinbeladung von 0,5 mg/cm{sup 2

  15. Status reports on the development and application of acoustic emission analysis. Proceedings; Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse. Beitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This proceedings-CD comprises 20 papers presented at the 17. Kolloquium Schallemission (Acoustic Emission Colloquium) at Bad Schandau. The following subjects were discussed: 1. Acoustic emission analysis of tensile tests on standard test specimens of different wood materials; 2. Application of pattern recognition methods for damage analyses of fibre-reinforced plastics; 3. Acoustic emission analysis for measuring crack growth in finned armor steel under dynamic load; 4. Acoustic emission analysis with zonal sound location: Test objects, test results and evaluation of acoustic emission signals; 5. Acoustic emission analysis in overall fatigue testing of a wind rotor blade; 6. Laboratory methods for assessing the sensitivity of acoustic emission sensors; 7. Acoustic emission analysis in burst tests of cast aluminium casings; 8. Visualization of acoustic emission localizations; 9. Threshold-independent and complete recording of characteristics and wave forms of transient and continuous acoustic emission; 10. Characterization of wide-band acoustic emission sensors; 11. Handling of large data volumes in acoustic emission analysis, a contribution to the development of algorithms; 12. Acoustic emission analysis and ultrasonic analysis for the characterization of crack networks in saline rock. One of the papers is available as a separate record in this database. [German] Diese Tagungs-CD enthaelt 20 Vortraege, die auf dem 17. Kolloquium Schallemission in Bad Schandau gehalten wurden. Die Themen waren: 1. Schallemissionsanalyse von Zugversuchen an Standardpruefkoerpern aus unterschiedlichen Holzwerkstoffen; 2. Anwendung von Mustererkennungsverfahren zur Schadensanalyse in faserverstaerkten Kunststoffen; 3. Anwendung der Schallemissionsanalyse zur Ermittlung des Risswachstums bei schwingender Beanspruchung von geripptem Bewehrungsstahl; 4. Schallemissionspruefung mit zonaler Ortung Pruefobjekte, Pruefergebnisse und Nachbewertung von Schallemissionssignalen; 5

  16. Dynamic magnetic resonance defecography in the diagnosis of combined pelvic floor disorders in proctology; Dynamische MR-Defaekographie zur Diagnostik kombinierter Beckenbodenfunktionsstoerungen in der Proktologie

    Energy Technology Data Exchange (ETDEWEB)

    Paetzel, C.; Strotzer, M.; Lenhart, M.; Feuerbach, S. [Klinikum der Univ. Regensburg (Germany). Inst. fuer Roentgendiagnostik; Fuerst, A.; Rentsch, M. [Klinikum der Univ. Regensburg (Germany). Chirurgische Klinik und Poliklinik

    2001-05-01

    Grundlage zur Beurteilung der einzelnen Verfahren darstellte. Ergebnisse: Patienten mit Obstipation (n = 15) zeigten innere Schleimhautvorfaelle (n = 5), anteriore Rektozelen (n = 8), Beckenbodendeszensus (n = 5), Enterozelen (n = 2) und anorektale Dyssynergien (n = 3). Bei Patienten mit Stuhlinkontinenz (n = 15) wurden anteriore Rektozelen (n = 10), Beckenbodendeszensus (n = 11), Enterozelen (n = 2), innere Schleimhautvorfaelle (n = 1) und eine Insuffizienz der Puborektalisschlinge nachgewiesen. Harninkontinenz war in 10 Faellen mit einer Zystozele und in 4 Faellen mit Normalbefunden im Bereich der Harnblase verbunden. Die Diagnose bei Patienten mit unspezifischen Beschwerden (n = 6) bestanden in anorektaler Dyssynergie (n = 4), innerem Mukosaprolaps (n = 2) und einem Beckenbodendeszensus. Die MRT zeigte sich im Nachweis von Enterozelen, Zystozelen und des Beckenbodendeszensus gegenueber der klinischen Untersuchung ueberlegen. Schlussfolgerungen: die dynamische MRT liefert komplexe und therapierelevante Informationen in der Diagnostik von Beckenbodenfunktionsstoerungen. (orig.)

  17. Electromechanical systems of micro-engineering and mechatronics. Dynamical design. Fundamentals and utilization. 2. ed.; Elektromechanische Systeme der Mikrotechnik und Mechatronik. Dynamischer Entwurf. Grundlagen und Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Ballas, Ruediger G. [KARL MAYER Textilmaschinenfabrik GmbH, Obertshausen (Germany). Kompetenzbereich Piezoaktorik und Antriebstechnik; Pfeifer, Guenther [Technische Univ. Dresden (Germany). Inst. fuer Halbleiter- und Mikrosystemtechnik; Werthschuetzky, Roland [Technische Univ. Darmstadt (Germany). Inst. fuer Elektromechanische Konstruktionen

    2009-07-01

    Electromechanical systems comprising electric, mechanical and acoustic subsystems are widely used in pricision apparatus construction, sensor and actuator techniques, electroacoustics and medical technique. The textbook presents a clear engineering design method for these systems on the basis of a circuiting diagram. It provides quick access to the mechanical, acoustic, hydraulic and thermal problems by applying basic knowledge on circuiting. The second edition is a revised and didactically improved version. The network description method was extended to finite network elements and to a combination with FEA in order to combine the advantages of the two description methods and to achieve new solutions especially for higher frequencies. The book contains many new examples of how to design sensors, actuators, and direct-coupled sensor-actuator systems. There is an appendix with fundamentals of signal description and a compilation of important material data. (orig.) [German] Elektromechanische Systeme aus elektrischen, mechanischen und akustischen Teilsystemen haben im Praezisionsgeraetebau, in der Sensor- und Aktortechnik, der Elektroakustik sowie in der Medizintechnik eine grosse Bedeutung. Die Vermittlung einer anschaulichen, ingenieurmaessigen Entwurfsmethode fuer diese Systeme auf der Grundlage einer schaltungstechnischen Darstellung ist das Hauptanliegen des Lehrbuchs. Es ermoeglicht einen raschen Einstieg in die mechanischen, akustischen, hydraulischen und thermischen Problemstellungen durch die Anwendung des schaltungstechnischen Grundwissens. Die 2. Auflage wurde neu bearbeitet und didaktisch verbessert. Die Netzwerkbeschreibungsmethodik wurde auf finite Netzwerkelemente und die Kombination mit der Finite-Elemente-Beschreibung (FEM) erweitert: aus der Kombination der Vorteile beider Beschreibungsmethoden ergeben sich neuartige Loesungsansaetze vor allem im hoeheren Frequenzbereich. Das Buch bietet zahlreiche aktuelle Beispiele zum Entwurf von Sensoren und

  18. Dynamic modelling and simulation of complex drive systems of large belt conveyors; Dynamische Modellierung und Simulation komplexer Antriebssysteme von Grossbandanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Burgwinkel, Paul; Vreydal, Daniel; Eltaliawi, Gamil; Vijayakumar, Nandhakumar [RWTH Aachen (DE). Inst. fuer Maschinentechnik der Rohstoffindustrie (IMR)

    2010-09-15

    For the first time the Co-simulation method was successfully used for full representation of a large belt conveyor for an open cast mine in a simulation model at the Institute for Mechanical Engineering in the Raw Materials Industry at Rhineland-Westphalia Technological University in Aachen. The aim of this project was the development of an electro-mechanical simulation model, which represents all components of a large belt conveyor from the drive motor to the conveyor belt in one simulation model and thus makes the interactions between the individual assemblies verifiable by calculations. With the aid of the developed model it was possible to determine critical operating speeds of the represented large belt conveyor and derive suitable measures to combat undesirable resonance states in the drive assembly. Furthermore it was possible to clarify the advantage of the full numerical representation of an electromechanical drive system. (orig.)

  19. Gerbstoffe aus Potentilla officinalis wirken entzündungshemmend im UV-Erythem-Test und bei Anwendung auf atopischer Haut.

    Science.gov (United States)

    Hoffmann, Julia; Wölfle, Ute; Schempp, Christoph M; Casetti, Federica

    2016-09-01

    Das Rhizom von Potentilla officinalis (PO) ist reich an Gerbstoffen und wird traditionell zur äußerlichen Behandlung von Entzündungen der Haut und der Schleimhäute verwendet. Ziel der vorliegenden Arbeit war die Bestätigung der antiinflammatorischen Eigenschaften von PO mittels eines UV-Erythem-Tests und einer klinischen Anwendungsstudie bei atopischer Haut. Die antiinflammatorische Wirkung eines PO-Extrakts (standardisiert auf 2 % Trockensubstanz) wurde in einer prospektiven, randomisierten, placebokontrollierten Doppelblindstudie mit 40 gesunden Erwachsenen im UV-Erythem-Test im Vergleich zu 1 % Hydrocortisonacetat untersucht. Im Rahmen einer prospektiven nicht kontrollierten Studie wurde die Wirkung und Verträglichkeit der 2 % PO-Creme an zwölf Erwachsenen und zwölf Kindern mit atopischer Haut nach Anwendung über zwei Wochen in einem definierten Testareal anhand eines Teil-SCORAD untersucht. Zusätzlich wurde die Beeinflussung der Hautrötung im Testareal photometrisch gemessen. Im UV-Erythem-Test zeigte die PO-Creme eine signifikante Reduktion des Erythemindex im Vergleich zum Vehikel. Die antiinflammatorische Wirkung des Verums entsprach der der 1 % Hydrocortisonacetat-Creme. Die klinische Studie bei Atopikern zeigte eine signifikante Abnahme des Teil-SCORAD und des Erythems im Testareal. Es wurden keine Unverträglichkeitsreaktionen beobachtet. PO als 2%ige Zubereitung besitzt entzündungshemmende Eigenschaften und ist wirksam und gut verträglich auf atopischer Haut. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  20. Intravenous administration of iodinated, non-ionic, low or isoosmolar contrast media: safety aspects; Intravenoese Anwendung von jodiertem, nichtionischem, nieder- bis isoosmolarem Kontrastmittel: Sicherheitsaspekte

    Energy Technology Data Exchange (ETDEWEB)

    Metz-Schimmerl, S.; Metz, V.; Schima, W.; Herold, C. [Universitaetsklinik fuer Radiodiagnostik und Ludwig Boltzmann-Institut fuer Klinische und Experimentelle Radiologie, Wien (Austria); Domanovits, H. [Universitaetsklinik fuer Notfallmedizin Wien, Wien (Austria)

    2002-01-01

    It iss the purpose of this review to provide information about the safe use of intravenously administered, iodinated, non-ionic, low or isoosmolar contrast media for radiological examinations, how to avoid adverse events, and how to react professionally in case of an anaphylactic reaction. Methods of prophylaxis and therapy for anaphylactic and chemotoxic effects of contrast media administration as well as absolute and relative contraindications are discussed. Medico-legal considerations of contrast agent administration, informed consent of patients, and methods of risk management for undesired contrast media reactions are considered in this article. Establishment of administration standards for contrast media is of tremendous importance to standardize radiological procedures. This basic radiological documentation is part of the institutional and individual legal safety management. (orig.) [German] Ziel dieses Artikels ist es, Kenntnisse zur sicheren Anwendung von intravenoes applizierten, jodierten, nichtionischen, nieder- bis isoosmolaren Roentgen-Kontrastmitteln zu vermitteln, um bei deren Verwendung unerwuenschte Wirkungen zu vermeiden oder im Falle eines anaphylaktischen Kontrastmittelzwischenfalls rasch und effektiv zu handeln. Neben Methoden der Verhuetung und Behandlung anaphylaktischer und chemotoxischer Wirkungen der Kontrastmittelgabe werden Einschraenkungen der Anwendung bei unterschiedlichen klinischen Bildern eroertert. Rechtliche Ueberlegungen zur Kontrastmittelanwendung, das Aufklaerungsgespraech und Praeventivmassnahmen zum Risiko-Management unerwuenschter Kontrastmittelwirkungen sind beruecksichtigt. Die Festlegung von Anwendungstandards fuer Kontrastmittel dient der Normierung medizinischen Vorgehens. Eine solche radiologische Basisdokumentation ist teil der institutionellen und individuellen rechtlichen Absicherung. (orig.)

  1. MR implant labelling and its use in clinical MRI practice; MR-Implantatkennzeichnungen und ihre Anwendung in der klinischen MRT-Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Muehlenweg, M. [Krankenhaus Martha-Maria Halle-Doelau, Institut fuer Radiologie, Halle (Saale) (Germany); Schaefers, G. [MR:comp GmbH, Gelsenkirchen (Germany)

    2015-08-15

    Before a magnetic resonance imaging (MRI) examination, implants in patients must be cleared for MR safety in order to exclude the risk of possible severe injuries and implant malfunction in an MR environment. The general contraindication for measurements of patients with implants still applies; however, in the recent past a way has been found to legally circumvent this contraindication. For this purpose special conditions are required: explicit implant identification and the original manufacturer's labelling are necessary, the required conditions for conditionally MR safe implants must be assured and a risk-benefit analysis with appropriate explanation to the patient has to be performed. This process can be very complex as the implants are often poorly documented and detailed information on the implant MR labelling is also often outdated or not easy to interpret. This article provides information about legal and normative principles of MR measurement of patients with implants. The possible physical interactions with implants will be briefly dealt with as well as possible strategies for better identification and investigation of implants and MR labelling. General approaches for minimizing the risk will be discussed using some examples. The second part deals with the content of MR implant labelling and the current test standards. Furthermore, the additional information from the operating instructions of the MR scanner that are necessary for the interpretation of the MR implant labelling, will be explained. The article concludes with an explanation of the current pattern for MR labelling of implants from the U.S. Food and Drug Administration (FDA) and an exemplary application. (orig.) [German] Implantate in Patienten muessen vor einer MR-Untersuchung auf MR-Sicherheit abgeklaert werden, um moegliche z. T. schwere Verletzungen und Implantatfehlfunktionen in einer MR-Umgebung weitestgehend auszuschliessen. Es gilt unveraendert die generelle Kontraindikation von

  2. Application of soil data in climate research; Anwendung von Bodendaten in der Klimaforschung

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann-Boll, Carolin; Kappler, Wolfgang; Lazar, Silvia [ahu AG Wasser - Boden - Geomatik, Aachen (DE)

    2011-10-15

    The German Strategy for Adaptation to Climate Change was adopted in 2008. The implementation of the strategy requires reliable data and time series on the long-term changes in soil condition and soil functions. Soil monitoring and soil survey are essential data bases for this purpose. In Germany there are permanently established monitoring programmes with representative locations and repeated soil surveys based on a regular grid of sites. The different programmes vary in respect to harmonization regarding agreed principles between the participating institutions. Information on soil measuring data is currently heterogeneous and distributed at many locations. Particularly the provision of (meta-)data should be improved. Here you can find the exceptional quality of BOKLIM. It evaluates the suitability of soil data for climate research across the different measuring programmes in Germany. The most important nation-wide and permanently operating programmes of soil monitoring and soil survey were taken into account. The main aspects were the changes in soil condition due to climate change. As a result, the programmes provide a variety of valuable data to assess the effects of climate change on soils. Depending on the problem and the resulting requirements, the data are suitable (1) for the long-term monitoring of changes in soil condition, (2) for detailed process studies and measurements at representative locations, e.g. for the calibration and validation of predictive models, and (3) for use in model scenarios predicting changes in soil condition. However, it is necessary to coordinate the programmes of soil monitoring and soil survey with the focus on precise questions. The programmes have to be optimized at certain points to improve for issues of climate change and adaptation. In addition to the evaluation of soil data, a first concept for an efficient data provision and data use was created. Recommendations for next steps to coordinate and optimize future monitoring

  3. Control-technical optimization of topped denitrification through fuzzy control; Regelungstechnische Optimierung der vorgeschalteten Denitrifikation durch Anwendung von Fuzzy-Control

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, U. [Hydroplan Ingenieurgesellschaft, Worms (Germany); Poepel, H.J. [Technische Univ. Darmstadt (Germany). Inst. WAR - Wasserversorgung, Abwassertechnik, Abfalltechnik, Umwelt- und Raumplanung

    1999-07-01

    The present paper describes complex fuzzy systems for controlling nitrogen elimination at plants with topped denitrification. For the design and testing of the fuzzy systems, dynamic simulation calculations and experimental tests were carried out in a semi-technical pilot plant. The controlling fuzzy systems indicate the supposed oxygen values for individual tank areas and the most appropriate partitioning of the activated sludge tank (anoxic/aerobic zone) as a function of the input quantities used. It is established that, with the more flexible control behaviour, a more stable nitrogen elimination and, at the same time, a cut in the amount of air transferred to the system can be attained in comparison with a conventional control. (orig.) [German] Im Rahmen dieses Beitrags werden komplexe Fuzzy-Systeme zur Regelung der Stickstoffelimination in Anlagen mit vorgeschalteter Denitrifikation vorgestellt. Zum Entwurf und zur Erprobung der Fuzzy-Systeme wurden dynamische Simulationsrechnungen und experimentelle Untersuchungen an einer halbtechnischen Versuchsanlage durchgefuehrt. Die uebergeordneten Fuzzy-Systeme geben in Abhaengigkeit der verwendeten Eingangsgroessen Sauerstoffsollwerte fuer die einzelnen Beckenbereiche und die jeweils guenstigste Aufteilung des Belebungsbeckens (anoxische/aerobe Zone) vor. Die Ergebnisse zeigen, dass durch das flexible Reglerverhalten eine stabilere Stickstoffelimination und gleichzeitig eine Einsparung an eingetragener Luftmenge im Vergleich zu einem konventionellen Regelsystem erreicht werden kann. (orig.)

  4. Detection of prostate carcinomas with T1-weighted dynamic contrast-enhanced MRI. Value of two-compartment model; Detektion von Prostatakarzinomen mit T1-gewichteter Kontrastmittel-unterstuetzter dynamischer MRT. Wertigkeit des Zweikompartimentemodells

    Energy Technology Data Exchange (ETDEWEB)

    Kiessling, F.; Lichy, M.; Farhan, N.; Delorme, S.; Kauczor, H.U. [Abteilung fuer Radiologie, Deutsches Krebsforschungszentrum (DKFZ) Heidelberg (Germany); Grobholz, R. [Abteilung fuer Pathologie, Universitaetsklinikum Mannheim (Germany); Heilmann, M. [Abteilung fuer Physik in der Radiologie, Deutsches Krebsforschungszentrum (DKFZ) Heidelberg (Germany); Michel, M.S.; Trojan, L. [Abteilung fuer Urologie, Universitaetsklinikum Mannheim (Germany); Werner, A.; Rabe, J. [Institut fuer Klinische Radiologie, Universitaetsklinikum Mannheim (Germany); Schlemmer, H.P. [Abteilung fuer Diagnostische Radiologie, Universitaetsklinikum Tuebingen (Germany)

    2003-06-01

    Aim The suitability of dynamic parameters of the two-compartment model for detecting prostate carcinomas and its correlation with tumor microvascular density were evaluated. The study included 43 patients with biopsy-proven prostate carcinoma: 28 were examined by 1.0-T MRI (Turbo-FLASH) and 15 by 1.5-T MRI (FLASH) with infusion of 0.1 mmol/kg Gd-DTPA. Signal time curves were parametrized with an open two-compartment model in amplitude and exchange rate constants (k{sub ep}).The microvascular density of resected prostate carcinomas was determined. The microvascular density in the tumors was significantly higher than in the adjacent healthy prostate tissue and correlated in both sequences with k{sub ep}. Prostate carcinomas of the peripheral zone were demarcated by amplitude and k{sub ep}. In the Turbo-FLASH sequence there was a significant difference between the tumor tissue and healthy peripheral zone in terms of k{sub ep} and in the FLASH sequence in terms of amplitude. Prostate carcinomas can be visualized with dynamic T1-weighted MR sequences using a two-compartment model. Moreover, the parameter k{sub ep} reveals the microvascular density in the tumor and can thus provide valuable clinical information for characterizing the tumors. (orig.) [German] Die Eignung dynamischer Parameter des Zweikompartimentemodells zur Erkennung von Prostatakarzinomen und deren Korrelation mit der Tumormikrogefaessdichte wurden evaluiert. 43 Patienten mit bioptisch gesichertem Prostatakarzinom wurden untersucht, 28 mit 1,0 T- (Turbo-FLASH-) und 15 bei 1,5-T-MRT (FLASH) unter Infusion von 0,1 mmol/kg Gd-DTPA. Signal-Zeit-Kurven wurden nach einem offenen Zweikompartimentemodell in Amplitude sowie Austauschratenkonstante (k{sub ep}) parametrisiert. An resezierten Prostatakarzinomen wurde die Mikrogefaessdichte bestimmt.Ergebnisse Die Mikrogefaessdichte in den Tumoren war signifikant hoeher als im angrenzenden gesunden Prostatagewebe und korrelierte bei beiden Sequenzen mit k{sub ep

  5. Cutting down operating costs at sewage treatment plant through aimed application of new characterization methods; Betriebskostenreduzierung auf Klaeranlagen durch gezielte Anwendung neuer Charakterisierungsmethoden

    Energy Technology Data Exchange (ETDEWEB)

    Friedrich, H.; Potthoff, A. [Fraunhofer-Institut fuer Keramische Technologien und Sinterwerkstoffe (IKTS), Dresden (Germany); Friedrich, E. [Ingenieurgesellschaft fuer Wasser und Entsorgung mbH, Radebeul (Germany)

    1999-07-01

    Mechanical dewatering of sewage sludge is state of the art. Because of increasing cost, more stringent regulations (act on waste recycling 'Kreislaufwirtschaftsgesetz' and the technical code on municipal waste), and the lack of landfill space, expensive thermal processing techniques are gaining ever greater weight. To assure that disposal costs remain reasonable, mechanical dewatering must be more and more enhanced. The following need to be optimized and enhanced: sludge properties, conditioning, and dewatering. (orig.) [German] Klaerschlaemme maschinell zu entwaessern ist Stand der Technik. Steigende Kosten, verschaerfte Bestimmungen (Kreislaufwirtschaftsgesetz, TA Siedlungsabfall) und fehlende Deponien geben den teuren thermischen Behandlungsverfahren ein immer groesseres Gewicht. Damit die Entsorgung bezahlbar bleibt, muss immer staerker mechanisch entwaessert werden. Optimiert und verbessert werden muessen die Schlammeigenschaften, die Konditionierung und die Entwaesserung. (orig.)

  6. Balancing and dynamic behaviour of a biofilter plant for complete cleaning of municipal sewage; Bilanzierung und dynamisches Verhalten einer Biofilteranlage zur Vollreinigung von kommunalem Abwasser

    Energy Technology Data Exchange (ETDEWEB)

    Dickgreber, M.; Luebbecke, S. [Preussag Wassertechnik GmbH, Bremen (Germany)

    1999-07-01

    Where municipal sewage treatment plants need to be extended or enlarged, biofilter systems represent an economical alternative. They can be used both for supplementary residual elimination purposes and to treat complete sewage streams. For a biofilter system for complete cleaning of sewage employing the DENIPOR trademark -NCS process which has been in operation since 1996 (2*500 population value), studies in process dynamics are carried out and a complete balance is set up. (orig.) [German] Biofilter stellen bei notwendigen Erweiterungen und Ausbaumassnahmen von kommunalen Klaeranlagen eine wirtschaftliche Alternative dar. Sie koennen fuer weitergehende Restreinigungsaufgaben und zur Vollstrombehandlung eingesetzt werden. An einer seit 1996 in Betrieb befindlichen Biofilteranlage zur Vollreinigung von kommunalem Abwasser nach dem DENIPOR {sup trademark} -NCS Verfahren (2*500EW) werden Untersuchungen zur Prozessdynamik sowie eine vollstaendige Bilanzierung durchgefuehrt. (orig.)

  7. Three-dimensional dynamic modelling of Polymer-Electrolyte-Membrane-Fuel-Cell-Systems; Dreidimensionale dynamische Modellierung und Berechnung von Polymer-Elektrolyt-Membran-Brennstoffzellen

    Energy Technology Data Exchange (ETDEWEB)

    Vath, Andreas

    2008-12-15

    This thesis deals with dynamic and multi-dimensional modelling of Polymer- Electrolyte-Membrane-Fuel-Cells (PEMFC). The developed models include all the different layers of the fuel cell e.g. flow field, gas diffusion layer, catalyst layer and membrane with their particular physical, chemical and electrical characteristics. The simulation results have been verified by detailed measurements performed at the research centre for hydrogen and solar energy in Ulm (ZSW Ulm). The developed three dimensional model describes the time- and spatial-dependent charge and mass transport in a fuel cell. Additionally, this model allows the analysis of critical operating conditions. For example, the current density distribution for different membranes is shown during insufficient humidification which results in local overstraining and degradation. The model also allows to analyse extreme critical operating conditions, e.g. short time breakdown of the humidification. Furthermore, the model shows the available potential of improvement opportunities in power density and efficiency of PEMFC due to optimisation of the gas diffusion layer, the catalyst and membrane. In the second part of the work the application of PEMFC systems for combined heat and power units is described by one-dimensional models for an electrical power range between 1 kW and 5 kW. This model contains the necessary components, e.g. gas processing, humidification, gas supply, fuel cell stack, heat storage, pumps, auxiliary burner, power inverter und additional aggregates. As a main result, it is possible to distinctly reduce the energy demand and the carbon dioxide exhaust for different load profiles. Today the costs for fuel cell systems are considerably higher than that of the conventional electrical energy supply. (orig.)

  8. Hydraulic balance by means of electromotoric HKV drives for dynamic load profiles; Hydraulischer Abgleich mittels elektromotorischer HKV-Antriebe fuer dynamische Lastprofile

    Energy Technology Data Exchange (ETDEWEB)

    Szendrei, Danny [Westsaechsische Hochschule Zwickau (Germany)

    2010-07-01

    To date, measures and concepts for saving energy become more and more important. The development of prices for conventional energy sources forces public and private households and businesses to changes in consumer behaviour and purchasing behaviour. Due to the structural infrastructure, the housing construction in communes strongly is affected by these developments. Nearly 35 % of the total energy demand in Europe account for heating of buildings generally. The most common type of heating system for heating of residential buildings is the central hot water heating in the two-tube version. It is assumed that nearly 90 % of the operated plants have a hydraulic unbalance. Additionally, balanced heating systems fulfil the desired efficiency only under certain, structural design conditions. The integration of the control of heating systems in the smart home infrastructure or KNX infrastructure enables a building-independent, tunable heat supply between buildings and consumption acquisition. The hydraulic system loads can be optimized simultaneously via the direct access to the control value. Thus, a homogeneous mass distribution over the plant can be guaranteed which is derived from the dynamic needs of the system users. These heat loads are calculated by the KNX system and the application of HeatingControl.

  9. Findings relating to the use of ACPI in Windows servers; Erfahrungen in der Anwendung von ACPI bei Windows-Servern

    Energy Technology Data Exchange (ETDEWEB)

    Huser, A.; Grieder, T.

    2004-07-01

    In a practical test, the possibilities and limits of the use of energy-saving sleep modes were compiled for servers of the lower price segment. Many of these servers are used by small to medium-sized enterprises and are left running around the clock, although they are not used at night or during the week-end. The implementation of the sleep modes is based on the so-called ACPI specification (Advanced Configuration and Power Interface), which was created by an industrial consortium. The most advanced of these is the implementation for the Windows Server 2003 operating system. With Linux, the sleep modes are not yet fully available. The test was therefore carried out with the Windows Server 2003 operating system. In many applications, and in particular when the servers are used as file or web servers, no operational disadvantages result from the use of the rest states. By making use of the lowest possible sleep mode during the night and at week-ends, the energy consumption of the server can be halved. For users, the results have been summarised in a two-page fact sheet, which is enclosed with this report as an appendix. (author)

  10. Siebenjährige Follow-up-Studie zur Anwendung des spannungsfreien Vaginalbandes (TVT zur Behandlung der Stressharninkontinenz

    Directory of Open Access Journals (Sweden)

    Nilsson CG

    2005-01-01

    Full Text Available Studienzweck: Evaluierung der langfristigen Heilungs- und Spätkomplikationsraten bei Stressharninkontinenz der Frau bei Behandlung mit dem spannungsfreien Vaginalband (TVT, das anhand einer minimal-invasiven Operation eingesetzt wird. Methodik: In drei Studienzentren durchgeführte prospektive Beobachtungs- und Kohortenstudie mit ursprünglich 90 Frauen, deren primäre Stressharninkontinenz einen operativen Eingriff erforderlich machte. Zu den Bewertungsvariablen gehörten ein Vorlagentest (Pad-Test zur Messung des Uringewichts je 24 Stunden, ein Stresstest, eine visuelle Analogskala (VAS zur Beurteilung des Beschwerdegrads sowie ein Fragebogen zur Beurteilung der subjektiven Wahrnehmung des Kontinenzstatus durch die Frauen. Ergebnisse: Als Follow-up-Zeitraum wurde ein durchschnittlicher Zeitraum von 91 Monaten (78–100 Monate festgelegt. Sowohl die objektive als auch die subjektive Heilungsrate lag bei den an der Follow-up-Studie teilnehmenden 80 Frauen bei 81,3 %. Bei 7,8 % der Frauen wurde ein asymptomatischer Prolaps der Organe des kleinen Beckens, bei 6,3 % De-novo-Drangsymptome und bei 7,5 % eine rezidivierende Harnwegsinfektion festgestellt. Weitere unerwünschte Nebenwirkungen des Verfahrens wurden nicht festgestellt. Schlussfolgerung: Die Wirkung der TVT-Operation zur Behandlung der Stressharninkontinenz der Frau bleibt über einen Zeitraum von 7 Jahren erhalten.

  11. Field-effect gas sensors and their application in exhaust treatment systems; Feldeffekt-Gassensoren und ihre Anwendung in Abgasnachbehandlungssystemen

    Energy Technology Data Exchange (ETDEWEB)

    Schalwig, Jan

    2002-07-01

    Tightening environmental constraints on exhaust gas emissions of gasoline and Diesel engines led to a growing interest in new and highly sophisticated gas sensors. Such sensors will be required in future exhaust gas aftertreatment systems for the selective real time detection of pollutants such as nitric oxides, hydrocarbons and carbon monoxide. Restrictions on cost and device dimensions imposed by the automobile industry make semiconductor gas sensors promising candidates for the realization of cheap and small-size sensor devices. This work deals with semiconductor field effect devices with catalytically active platinum (Pt) electrodes and potential applications of such devices in automotive exhaust gas aftertreatment systems. To allow for continuous operation at high temperatures, silicon carbide (SiC) and group III-nitrides such as GaN and AlGaN were used as semiconductor materials. Different devices have been realized with such materials: SiC based MOS capacitors (MOSiC), GaN Schottky diodes and GaN/AlGaN high electron mobility transistors (HEMT). The principle feasibility of SiC and GaN based field effect gas sensors for automotive applications was tested under laboratory conditions using synthetic gas mixtures. Exhaust gas components such as carbon monoxide (CO), nitric oxides (NO and NO{sub 2}), various saturated and unsaturated hydro-carbons as well as water vapor, oxygen (O{sub 2}) and hydrogen (H{sub 2}) were used as test gases in appropriate concentrations with the sensor devices being operated in a range of temperatures extending from room temperature up to 600{sup o}C. (orig.)

  12. Advanced energy conversion and application - Decentralized energy systems. Papers; Fortschrittliche Energiewandlung und -anwendung - Schwerpunkt: Dezentrale Energiesysteme. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Decentralized energy systems is the major topic of this VDI report which contains the proceedings of the VDI conference on advanced energy conversion and application. The decentralized energy systems are in the focus because it is expected that they will gain in significance in the course of restructuring and liberalisation of the energy markets and growing commitment to greenhouse gas mitigation. The subjects of the papers are the cogeneration technology in general, and specific systems for combined generation of heat, power and cold,(CHPC systems), systems for renewable energy generation, industrial energy technology, and analysis and optimization of energy systems. The report is intended to serve as a source of guidance and reference for manufacturers and operators of decentralized energy systems, for decision-making on energy policy, and for the energy industry, counselling firms and regulatory/surveillance bodies, and members of universities involved in relevant research and development work. (orig./CB) [German] Themenschwerpunkt des VDI-Berichts sind die dezentralen Energiesysteme, die im Spannungsfeld von fortschreitender Liberalisierung der Energiemaerkte und der Bemuehungen um die Reduzierung von Emissionen an Bedeutung gewinnen. Dabei widmen sich die Beitraege den Systemen zur Kraft-Waerme-Kaelte-Kopplung und zur Nutzung erneuerbarer Energie sowie der industriellen Energietechnik und der Analyse und Optimierung von Energiesystemen. Der Bericht wendet sich an Hersteller und Betreiber dezentraler Energieanlagen, an Entscheidungstraeger aus Politik und Wirtschaft, an Berater und Ueberwachungsinstitutionen sowie an auf diesem Gebiet taetige Hochschullehrer und -mitarbeiter. (orig.)

  13. Handbuch Stahl Auswahl, Verarbeitung, Anwendung

    CERN Document Server

    Bleck, Wolfgang

    2018-01-01

    Stahl ist der wichtigste Konstruktionswerkstoff. Im Maschinen- und Anlagenbau, Fahrzeugbau, Schiffbau, Stahlbau und in vielen anderen Industriebereichen ist er durch keinen anderen Werkstoff zu ersetzen. Für jeden Anwendungszweck gibt es passende Stahlsorten am Markt zu kaufen. Die Feinabstimmung der gewünschten Eigenschaften kann im weiteren Verarbeitungsprozess vorgenommen werden, bis der Werkstoff optimal den gewünschten Produktanforderungen entspricht. Die Anzahl der Möglichkeiten ist sehr groß und somit auch die Schwierigkeit, den genau passenden Stahl zu finden bzw. zu erzeugen. Das vorliegende Handbuch hilft Ihnen, dieses Problem zu lösen. Es zeigt u.a. - mit welchen systematischen Ansätzen und Hilfsmitteln Sie die in Frage kommende Stahlsorte eingrenzen können - die wichtigsten produktrelevanten Eigenschaften und Lieferformen - die werkstoffgerechte Weiterverarbeitung durch umformende und spanende Fertigungsprozesse und Wärmebehandlung - hunderte Anwendungsbeispiele aus Maschinen- und Anlage...

  14. Application of radioactive substances in research in nuclear medicine: current trends and radiation exposure to the study subjects; Anwendung radioaktiver Stoffe in der nuklearmedizinischen Forschung: aktuelle Trends und Strahlenexposition der Probanden

    Energy Technology Data Exchange (ETDEWEB)

    Minkov, V.; Schwarz, E.R.; Bauer, B.; Nosske, D.; Erzberger, A.; Brix, G. [Bundesamt fuer Strahlenschutz, Inst. fuer Strahlenhygiene, Abt. fuer Medizinische Strahlenhygiene, Neuherberg (Germany)

    2001-08-01

    the studies showed, for the period of evaluation, an overall trend towards reduction. (orig.) [German] Ziel: Im Rahmen dieser Studie wurde die Anwendung radioaktiver Stoffe am Menschen in der nuklearmedizinischen Forschung und die damit fuer die Probanden verbundene Strahlenexposition analysiert. Methodik: Hierzu wurden die zwischen 1997 und 1999 vom Bundesamt fuer Strahlenschutz zusammen mit dem Bundesinstitut fuer Arzneimittel und Medizinprodukte begutachteten Antraege nach paragraph 41 Strahlenschutzverordnung ausgewertet. Ergebnisse: Der Schwerpunkt der begutachteten Studien zur diagnostischen Anwendung radioaktiver Stoffe hat sich seit 1998 von onkologischen auf neurologisch/psychiatrische Fragestellungen verlagert, wobei die Anzahl der PET-Studien stetig zunahm. Der Anteil der in diagnostische Studien einbezogenen gesunden Probanden ist von 7 auf 22% angestiegen. Therapeutische Anwendungen radioaktiver Stoffe nahmen seit 1997 um das Dreifache zu, wobei der Schwerpunkt im Bereich der Radioimmuntherapie und der endovaskulaeren Brachytherapie lag. Fuer bis zu 49% der untersuchten gesunden Probanden war die effektive Dosis hoeher als 5 mSv, fuer bis zu 6% dieser Probanden lag sie ueber 20 mSv. Bis zu 22% der Patienten erhielten im Rahmen diagnostischer Studien eine effektive Dosis von 20-50 mSv. Eine Ueberschreitung der 50-mSv-Grenze trat bei bis zu 3% der Patienten auf. Schlussfolgerungen: Trotz zunehmender Anwendung der PET behaelt die konventionelle Nuklearmedizin ihre Bedeutung in der medizinischen Forschung. Weiterentwicklungen auf dem Gebiet der Radiochemie und Molekularbiologie fuehrten zu einer zunehmenden Bedeutung der Radioimmuntherapie. Die Evaluierung neuer Radiopharmaka und die Erweiterung der biomedizinischen Grundlagenforschung resultierte in einem Anstieg des Anteils der in die Studien einbezogenen gesunden Probanden. Die studienbedingte Strahlenexposition der Probanden zeigte fuer den ausgewerteten Zeitraum insgesamt einen ruecklaeufigen Trend

  15. Impact of dynamic traffic management on air quality. Final report of a study on the impact of dynamic traffic management on the air quality along highways; Invloed DVM op de luchtkwaliteit. Eindrapport onderzoek naar het effect van dynamisch verkeersmanagement op de luchtkwaliteit langs snelwegen

    Energy Technology Data Exchange (ETDEWEB)

    Drewes, W.; Fransen, W. [DHV, Amersfoort (Netherlands)

    2009-12-15

    Within the Air Quality Innovation programme (IPL) a broad survey has been carried out on the possibilities of Dynamic Traffic Management (DTM) to improve air quality. This report finalizes the survey that was carried out within the IPL, and summarizes the results of the separate reports. Next to this final report, also a recommendation was made with regard to applying DTM to improve air quality. The final report starts with a comprehensive summary of the results of all the sub-surveys. In addition, for each sub-survey and other relevant publications, used in preparing the recommendation, the key issues and abstracts are presented. [Dutch] Binnen het Innovatieprogramma Luchtkwaliteit (IPL) is breed onderzoek gedaan naar de mogelijkheden om met Dynamisch Verkeersmanagement (DVM) de luchtkwaliteit te verbeteren. Dit rapport sluit het onderzoek dat binnen het IPL is uitgevoerd af en vat de afzonderlijk gerapporteerde resultaten samen. Naast dit eindrapport is ook een toepassingsadvies gericht op het inzetten van DVM ter verbetering van de luchtkwaliteit opgesteld. Het eindrapport begint met een integrale samenvatting van de resultaten van alle deelonderzoeken. Daarnaast zijn van elk deelonderzoek en andere relevante publicaties die gebruikt zijn bij het opstellen van het toepassingsadvies de kernpunten en beknopte samenvattingen opgenomen.

  16. Physiological and technical limitations of functional magnetic resonance imaging (fMRI) - consequences for clinical use; Physiologische und technische Grenzen der funktionellen Magnetresonanztomographie und die damit verbundenen Konsequenzen fuer die klinische Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Wuestenberg, T. [Neurologische Klinik der Charite, Humboldt-Universitaet Berlin (Germany); Neurologische Klinik der Charite, Humboldt-Universitaet Berlin, Schumannstrasse 20/21, 10117, Berlin (Germany); Jordan, K. [Institut fuer Psychologie II, Otto-von-Guericke-Universitaet Magdeburg (Germany); Giesel, F.L. [Abteilung fuer onkologische Diagnostik und Therapie, Deutsches Krebsforschungszentrum Heidelberg (Germany); Villringer, A. [Neurologische Klinik der Charite, Humboldt-Universitaet Berlin (Germany)

    2003-07-01

    Functional magnetic resonance imaging (fMRI) is the most common noninvasive technique in functional neuroanatomy. The capabilities and limitations of the method will be discussed based on a short review of the current knowledge about the neurovascular relationship. The focus of this article is on current methodical and technical problems regarding fMRI-based detection and localization of neuronal activity. Main error sources and their influence on the reliability and validity of fMRI-methods are presented. Appropriate solution strategies will be proposed and evaluated. Finally, the clinical relevance of MR-based diagnostic methods are discussed. (orig.) [German] Die funktionelle Magnetresonanztomographie (fMRT) ist eines der wichtigsten Verfahren der funktionellen Neuroanatomie. Aufbauend auf einer kurzen Darstellung des aktuellen Wissensstands bzgl. des Zusammenhangs zwischen lokaler neuronaler Aktivitaet und haemodynamischer Reaktion werden ausgewaehlte Moeglichkeiten und Grenzen des Verfahrens fuer die klinische Anwendung diskutiert. Der Schwerpunkt liegt dabei auf der Darstellung der derzeitigen methodischen und technischen Einschraenkungen hinsichtlich einer fMRT-basierten Detektion und Lokalisierung neuronaler Aktivitaet. Es werden die Hauptfehlerquellen und ihre Auswirkungen auf die Reliabilitaet und Validitaet des Verfahrens erlaeutert und aktuelle Loesungsansaetze diskutiert. Abschliessend erfolgt eine Bewertung der aktuellen klinischen Relevanz funktioneller MR-Diagnosemethoden. (orig.)

  17. Why OR.NET? Requirements and perspectives from a medical user's, clinical operator's and device manufacturer's points of view.

    Science.gov (United States)

    Czaplik, Michael; Voigt, Verena; Kenngott, Hannes; Clusmann, Hans; Hoffmann, Rüdiger; Will, Armin

    2018-02-23

    In the past decades, modern medicine has been undergoing a change in the direction of digitalisation and automation. Not only the integration of new digital technologies, but also the interconnection of all components can simplify clinical processes and allow progress and development of new innovations. The integration and interconnection of medical devices with each other and with information technology (IT) systems was addressed within the framework of the Federal Ministry of Education and Research (BMBF)-funded lighthouse project OR.NET ("Secure dynamic networking in the operating room and clinic".) (OR.net-Forschungskonsortium (OR.net Research Syndicate.) OR.net - Sichere dynamische Vernetzung in Operationssaal und Klinik [Online]. Available: www.ornet.org. [last accessed 22 March 2017]). In this project the standards and concepts for interdisciplinary networking in the operating room (OR) were developed. In this paper, the diverse advantages of the OR.NET concept are presented and explained by the OR.NET "Medical Board". This board represents the forum of clinical users and includes clinicians and experts from various specialties. Furthermore, the opinion from the viewpoint of operators is presented. In a concluding comment of the "Operator Board", clinical user needs are aligned with technical requirements.

  18. Environmental protection by cost minimization: Least Cost Planning for traffic. Includes a guide for the application in local communities; Umweltentlastung durch Kostenminimierung: Least Cost Planning im Verkehr. Mit Leitfaden fuer die Anwendung in Kommunen

    Energy Technology Data Exchange (ETDEWEB)

    Bracher, T.; Diegmann, V.; Eckart, C.F.; Liwicki, M.; Lobenberg, G.; Wetzel, C. [Gesellschaft fuer Informatik, Verkehrs- und Umweltplanung mbH (IVU), Berlin (Germany); Bergmann, M.; Uricher, A.; Lueers, A. [Oeko-Institut, Inst. fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Becker, U.; Karl, G.; Karl, B.; Voellings, A. [Technische Univ. Dresden (Germany). Lehrstuhl fuer Verkehrsoekologie

    1999-08-01

    den Energiesektor entwickelte Least Cost Planning zu uebertragen. Auf der Basis einer Analyse der in der Literatur dokumentierten Ansaetze und der vorhandenen Bewertungsverfahren fuer oeffentliche Massnahmen wurden Anforderungen an Methodik und Entwicklung eines verbesserten Bewertungsverfahrens formuliert. Dieses muss verkehrsmitteluebergreifend (intermodal) und verkehrsuebergreifend (integriert) sein. Das entwickelte Verfahren ermoeglicht erstens die Darstellung der Verkehrsausgaben und Einnahmen einer Stadt im Jahresueberblick, und zweitens die vergleichende Bewertung von Planungsvarianten. Dies wurde anhand verschiedener Varianten fuer die Erschliessung eines Gewerbegebiets im Norden Freiburgs illustriert. Dabei wurden drei Varianten untersucht: die Verlaengerung einer Stadtbahnstrecke, die Verdichtung des Busverkehrsnetzes und die Einrichtung von Service-Stationen und weitere Foerdermassnahmen fuer den Fahrradverkehr. Neben den Berechnungen von Einnahmen und Ausgaben fuer jede Variante wurde eine uebersichtliche Darstellung von Auswirkungen auf die Verkehrsnachfrage, die Belastung mit Luftschadstoffen und Laerm sowie den Flaechenverbrauch entwickelt. Im Ergebnis schneidet die Erschliessung mit dem Fahrrad tendenziell guenstig ab. Der Abschlussbericht umfasst drei Baende sowie einen Leitfaden zur Anwendung des Verfahrens in Kommunen. Dazu gehoert ein Satz Tabellen im Excel Format, der die leichte Anwendung ermoeglicht. (orig.)

  19. Screening of additives for the production of ice pulp for application in normal cooling and freezing; Screening von Zusatzstoffen zur Herstellung von Eisbrei fuer die NK-/TK-Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Ruebeling, Jascha; Eiseler, Jens [Hochschule Karlsruhe - Technik und Wirtschaft (Germany). Inst. fuer Kaelte-, Klima- und Umwelttechnik

    2011-07-01

    The project investigated non-toxic additives for production of ice slurry. Ice slurry is an environment-friendly refrigerant that is increasingly used as a substitute for conventional refrigerants. In view of rising energy prices and an impending tax on climate-relevant refrigerants, ice slurry may soon be used for chilling of food in supermarkets. For this, ice slurry of about 0 C is required for normal cooling and of about -25 C for deep freezing. A very fine-grained, pumpable ice slurry is obtained with glucose as an additive, or with sodium chloride in eutectic concentration with small amounts of ethanol for deep freezing. Ethanol will refine the coarse crystal structure of the eutectic sodium chloride / water mixture and will also reduce the freezing point. Further, the method of primary crystallisation on a crystallised additive was developed. An industrial plant working by this principle will have less disturbances and wear during ice slurry production. [German] Die Projektarbeit befasste sich mit der Untersuchung lebensmittelvertraeglicher Additive zur Herstellung von Eisbrei. Eisbrei gilt als umweltfreundlicher Kaeltetraeger, der zunehmend in verschiedenen Bereichen zur Anwendung kommt und herkoemmliche Kaeltemittel ersetzen kann. Aufgrund steigender Energiekosten sowie einer eventuell anstehenden Besteuerung treibhauswirksamer Kaeltemittel, kann Eisbrei zukuenftig zur Kuehlung von Lebensmitteln in Supermaerkten verwendet werden. Dazu wird Eisbrei mit ca. 0 C fuer die Normalkuehlung, beziehungsweise mit ca. -25 C fuer die Tiefkuehlung benoetigt. Mit Glucose als Zusatzstoff laesst sich ein sehr feinkoerniger und damit pumpbarer Eisbrei fuer die Normalkuehlung erzeugen. Bei der Tiefkuehlung ist Natriumchlorid in einer eutektischen Konzentration mit geringen Mengen Ethanol empfehlenswert. Ethanol verfeinert die grobe Kristallstruktur des reinen eutektischen Natriumchlorid-Wasser-Gemisches und senkt den Gefrierpunkt. Des Weiteren wurde das Verfahren der

  20. Rehabilitation of the natural gas field Thoense with wet transport of natural gas; Sanierung des Erdgasfeldes Thoense unter Anwendung des Erdgasnasstransports

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, W.; Gerhartz, B.; Schmitt, D.; Uphoff, T. [BEB Erdgas und Erdoel GmbH, Hannover (Germany)

    1998-12-31

    Natural gas has been extracted the gas field of Thoense situated at the Northern fringe of the city of Hannover for over forty years. At all 10 bore sites the gas was dried with glycol dryers. While dealing with the problem of hydrocarbon emissions from the dryers it became evident, that some of the very old plants had to be rehabilitated. BEB operates the Thoense field on behalf of Elwerath/Brigitta/Deutz. An integrated concept, based on wet transport of natural gas, was used to remove the emission of hydrocarbons and rehabilitate the surface plants in order to cut operating costs. The field at Thoense is now economically efficient enough to continue operations for a long time. [Deutsch] Aus dem am nordoestlichen Stadtrand Hannovers liegenden Gasfeld Thoense wird seit ueber vierzig Jahren Erdgas gefoerdert. Die Gastrocknung erfolgte dort in ueblicher Weise mit Glykoltrocknungsanlagen an allen zehn Bohrungen. Bei der Bearbeitung des damit verbundenen Problems der Kohlenwasserstoffemissionen aus den Trocknungsanlagen wurde der Sanierungsbedarf an den z.T. sehr alten Anlagen deutlich. Das Feld Thoense wird von BEB fuer das Konsortium Elwerath/Brigitta/Deutz betrieben. Es wird gezeigt, wie mit einem integrierten Konzept auf der Basis des Erdgasnasstransportes die KW-Emissionen beseitigt wurden und gleichzeitig eine betriebskostensenkende Sanierung der obertaegigen Anlagen durchgefuehrt werden konnte. Damit wurde die wirtschaftliche Voraussetzung geschaffen, die Gasversorgung aus Thoense noch lange aufrecht erhalten zu koennen. (orig.)

  1. Cobit-Framework and process control engineering. Application of Cobit-Process documentation ME3; Cobit-Framework und die Netzleittechnik. Anwendung der Cobit-Prozessbeschreibung ME3

    Energy Technology Data Exchange (ETDEWEB)

    Bosin, Erwin [Tiwag-Netz AG, Thaur (Austria). Prozessrechner und USV

    2009-11-16

    Cobit (Control Objectives for Information and related Technology) is an internationally recognised framework which offers two approaches to facilitating the operativeness of the power system management. One is aimed at the selection of the relevant processes needed for meeting business requirements and the other at identifying possible improvements to control and steering mechanisms in the selected processes. This is documented by the selected Cobit ME3 process (''Ensure Compliance With External Requirements''). The high security level of the power system management must be maintained in this context.

  2. Deep desulfurization of jet fuel for applications in mobile fuel cell systems; Tiefentschwefelung von Flugturbinenkraftstoffen fuer die Anwendung in mobilen Brennstoffzellensystemen

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yong

    2012-07-01

    Fuel cell powered APUs are promising for the on-board electricity supply in heavy vehicles, aircraft and ships because of their high efficiency and low emission of pollutants. The catalytical reforming with subsequent gas processing units is applied to operate the fuel cell system with onboard available fuels. Within the reformer the liquid fuel is converted into a hydrogen-rich synthesis gas in the presence of metal catalysts. However, an on-board desulfurization of fuels is required to avoid the deactivation of catalysts in the fuel processing unit as well as in the fuel cell. The present work aims at developing a technically feasible deep desulfurization process for fuel cell powered APUs with theoretical and experimental study as well as procedural analysis. The focus of the work is on the desulfurization of jet fuels in liquid phase, since the reformer currently developed in IEK-3 is designed for aviation applications of fuel cell APUs and it can only be operated by liquid jet fuels. In addition, the desulfurization of marine gas oil was investigated to fulfill the sulfur requirement of the fuels for the application of fuel cell A PUs for inland navigation. In the petroleum industry, low-sulfur fuels are often obtained by hydrodesulfurization and the S-Zorb Process. However, these conventional methods are highly inconvenient for reducing sulfur compounds to the desired level in a mobile fuel cell system, since improvements of the desulfurization efficiency are limited by increasingly severe operating conditions and escalating costs. Moreover, the hydrodesulfurization and the S-Zorb Process are not suitable for mobile applications, since hydrogen recycling is required, which is not possible with H{sub 2} syngas. To this end, a large number of processes discussed in the literature were assessed with regard to their application in fuel cell APUs. Three potentially suitable processes were selected: pervaporation, adsorption, and hydrodesulfurization with pre

  3. Lactobacilli and ionising radiation: an example of the application to meat and meat products. Laktobazillen und ionisierende Strahlung als Beispiel einer Anwendung auf Fleisch und Fleischprodukte

    Energy Technology Data Exchange (ETDEWEB)

    Holzapfel, W.H. (Inst. fuer Hygiene und Toxikologie, Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany))

    1992-01-01

    Ionising radiation provides a practical pasteurisation method for the terminal treatment of refrigerated vacuum-packaged meat products with the aim of shelf life extension. However, the relatively high radiation resistance ([gamma]-D[sub 10] = 0.70-1.2 kGy) of typical meat Lactobacilli, especially Lb. sake, selectively favours their total domination after treatments with 5 kGy. Typical meat strains show higher resistance (in term of [gamma]-D[sub 10] values the decimal reduction value due to irradiation) in the log (exponential) than in the stationary phase. This phenomenon was observed both in semi-synthetic broth and in meat, and may be explained in terms of a DNA repair mechanism operative during the exponential phase. Packaging under different gas atmospheres resulted in increased resistance to radiation in presence of N[sub 2], whilst the highest death rate was observed in presence of CO[sub 2]. (orig.)

  4. Shared technologies in the development of the Titan 250 trademark gas turbine system; Anwendung bewaehrter Technologien bei der Entwicklung des Titan 250 trademark Gasturbinensystems

    Energy Technology Data Exchange (ETDEWEB)

    Stang, Ulrich; Knodle, Mark; Novaresi, Mark [Solar Turbines, Inc., San Diego, CA (United States); Ottoboni, Luigi [Turbomach SA, Riazzino (Switzerland)

    2010-07-01

    The Titan 250 gas turbine and C85 centrifugal gas compressor are the latest additions to the Solar Turbines product family. These new products leverage core technologies that have been developed and proven in several other well-established products. The Titan 250 gas turbine is a conservative hybrid design grounded in advanced aerodynamic, thermal and mechanical design tools and methodologies. It is ISO rated at 22.4 MW (30,000 HP), with a best-in-class shaft efficiency of 40% reducing fuel costs and emissions. The engine is a two-shaft design that includes a 16-stage axial flow compressor (PR 24:1), a dry low emissions combustor (<15 ppmv NOx), a two-stage gas producer turbine operating at a firing temperature of 1200 C (2200 F), and a three-stage, maximum efficiency, fully shrouded power turbine. (orig.)

  5. Methods for safe and economical design of components of ABS/ABR braking systems in terms of operating stability; Methodik zur sicheren und wirtschaftlichen betriebsfesten Auslegung von Komponenten in ABS/ASR-Bremssystemen

    Energy Technology Data Exchange (ETDEWEB)

    Bacher-Hoechst, M. [Robert Bosch GmbH, Technisches Zentrum Schwieberdingen (Germany); Sonsino, C.M. [Fraunhofer-Institut fuer Betriebsfestigkeit (LBF), Darmstadt (Germany)

    1997-05-01

    The combination of hardware-in-the-loop simulators with stress calculation in terms of operating stability at Robert Bosch GmbH, as well as experience gathered at LBF Darmstadt with component in terms of operating stability, result in optimized design of hydraulic units for antilock systems (ABS) and acceleration skid control systems (ASC). Thus, both safety demands and economic demands are met. (orig./AKF) [Deutsch] Die kombinierte Anwendung von Hardware-In-The-Loop-Simulatoren mit betriebsfestigkeitsgerechter Belastungserfassung bei der Robert Bosch GmbH und die beim LBF Darmstadt vorliegenden Erfahrungen bei der betriebsfesten Bauteilauslegung fuehren zu einer optimierten Auslegung und Absicherung von Hydraulikaggregaten fuer Antiblockier- und Antriebsschlupfregelungssyteme (ABS,ASR). Die wesentlichen Schritte dieses Vorgehens wurden gezeigt. Auf diese Weise ist es moeglich, den Sicherheitsanforderungen derartiger Bauteile einerseits und den wirtschaftlich-technischen Rahmenbedingungen andererseits zu entsprechen. (orig./AKF)

  6. Simulation, optimization, and heuristic in practical application: requirements, state of the art, and development perspectives; Simulation, Optimierung und Heuristik in der praktischen Anwendung: Anforderungen, Stand und Entwicklungsperspektiven

    Energy Technology Data Exchange (ETDEWEB)

    Toelle, F.J.

    1997-12-01

    Process Simulation is routine in chemical engineering and process analysis. This article traces the early developments of process simulation of flowsheeting. Dramatically new expectations and visions are emerging for software tools used in chemical process modeling and simulation. Many companies anticipate a rapid migration of process modeling software to an open architecture. The software components exploit object-oriented pragmatics, including abstraction, encapsulation, inheritance and polymorphism. We discuss the software architecture of tools supporting process synthesis and operations optimization. (orig.) [Deutsch] Als Simulation bezeichnen wir ein experimentelles Vorgehen, bei dem wir bestimmte Eigenschaften eines tatsaechlichen oder auch gedachten technischen, wirtschaftlichen, biologischen Systems nicht am Original selbst, sondern ersatzweise an einem geeigneten Modell des Originals, dem sogenannten Simulator, untersuchen. Bezogen auf die Prozess- und Verfahrenstechnik sind dies primaer funktionelle und systemdynamische Eigenschaften, wie zum Beispiel ein Kraftwerksblock, den wir moeglichst genau dem Original nachbilden. Dabei werden nur jene Aspekte des realen Verhaltens nachgebildet, die vom Modellierer als notwendig erachtet werden. Ein guter Simulator liefert in der Regel eine bequeme und umfassende, zeit- und kostenguenstige, gelegentlich sogar einzige praktikable Moeglichkeit zum Studium aller Betriebszustaende und Eigenschaften des Originals. (orig.)

  7. Operation planning for a pondage power station chain by means of linear programming and genetic optimisation; Einsatzplanung fuer eine Flusskraftwerkskette im Schwellbetrieb mittels LP und genetischer Optimierung

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, H.; Huelsemann, M.

    1997-12-31

    This paper presents a system package which serves as a simulation and optimisation tool for daily operation planning for a hydroelectric cascade. The purpose of the planning is to maximise (the differentially weighted) production of electrical energy given a certain set of specifications and secondary conditions. Optimal operation management is achieved using a two-stage approach: first pre-optimisation by means of linear programming, followed by detail optimisation using a Genetic Algorithm based on a non-linear, dynamic model of the power station and reservoir chain. [Deutsch] Im Beitrag wird ein Systempaket als Simulations- und Optimierungswerkzeug zur taeglichen Betriebsplanung einer Wasserkraftwerkskaskade vorgestellt. Ziel der Wasserbewirtschaftung ist es, unter den gegebenen Vorgaben und Randbedingungen die (bewertete) Erzeugung elektrischer Energie zu maximieren. Das optimale Fahrplanmanagement wird durch einen zweistufigen Loesungsansatz realisiert: Mit einer Vor-Optimierung mittels Linearer Programmierung (LP), gefolgt von einer detaillierten Optimierung mit einem Genetischen Algorithmus, der auf ein nichtlineares, dynamisches Simulationsmodell fuer die Kette aus Kraftwerken und Stauraeumen zugreift. (orig./RHM)

  8. A universal concept for IV-supported operation management; Ein universelles Konzept fuer die IV-gestuetzte Betriebsfuehrung

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A.

    1997-12-31

    The continuing rise in cost pressure calls for measures for enhancing the efficiency of operation management and maintenance. At the same time it is necessary to maintain the requisite reliability of production and keep abreast of the ever more stringent requirements of working safety and environment protection. This paper presents an integral operation management system for production plants which does justice to both the productive and the and the conserving function of operation management. The development and introduction of this system to conventional power plants has meanwhile begun. The system consistently gives consideration to the fact that operation management depends on processing data and information of different properties. Whereas process data can show strong fluctuations, there are many kinds of information on the plant concerning, for example, plant installations, processes, damage, and maintenance which hardly fluctuate at all or only change over long time periods. These latter include plant and installation addresses, technical data on the system or on maintenance. In operation management systems designed for production plants it can therefore be useful to organise the handling of process data (dynamic data) and plant data (static data) separately. [Deutsch] Der immer staerkere Kostendruck erfordert Massnahmen zur Effizienzsteigerung der Betriebsfuehrung und der Instandhaltung bei Erhaltung der erforderlichen Zuverlaessigkeit der Produktion, steigenden Anforderungen an Arbeitssicherheit und Umweltschutz. Ein Gesamtbetriebsfuehrungssystem, das sowohl die Produktionsfunktion, als auch die Erhaltungsfunktion abdeckt, wurde fuer Produktionsanlagen konzipiert. Fuer konventionelle Kraftwerke wurde die Entwicklung und Einfuehrung begonnen. Dieses System beruecksichtigt konsequent, dass bei der Betriebsfuehrung Daten und Informationen mit unterschiedlichen Eigenschaften zu verarbeiten sind. Waehrend die Prozessdaten hoch fluktuierende Daten sein koennen

  9. Anwendung des autogenen Trainings im Kindesalter

    OpenAIRE

    Sühling, Nikola

    2004-01-01

    The autogenic training was developed by J.H.Schulz in the period between 1912-1920 based on the experiences of his hypnosis patients. These reported of a regular occurrence of certain perceptions at the beginning of the treatment. J.H.Schulz derived six exercises from this experience, through which the patient is said to get relaxed. Among others these exercises contain the idea to get warm and heavy arms and legs. Furthermore, physical reactions in the abdomen, thorax and the head will be in...

  10. Stimmrehabilitation und Psychotherapie - Anwendung bei Lehrern

    OpenAIRE

    Niebudek-Bogusz, E; Śliwinska-Kowalska, M

    2005-01-01

    Voice disorders in teachers are not only a serious medical but also social and economic problem in Poland. It has been shown that teachers are at risk of developing occupational dysphonia which account for over 25% of all occupational diseases diagnosed in Poland. Voice problems affects psychological wellbeing of teachers, while psychological factors may induce escalation of voice pathologies in this professional group. The study was aimed to assess the effectiveness of phoniatric treatment i...

  11. Prozessentwicklung für die kontinuierliche dynamisch kinetische Racematspaltung

    OpenAIRE

    Roosen, Christoph

    2010-01-01

    A dynamic kinetic resolution is an interesting and reasonable extension for a simple kinetic resolution. Especially for the connection of an enzymatic catalysed kinetic resolution and a chemical catalysed racemisation very good results are known from literature. Common compatibility problems between both reactions and interaction between both catalysts require a long development which is a criterion of exclusion for many industrial processes. Within this thesis a reaction engineering solution...

  12. Spatial Operations

    Directory of Open Access Journals (Sweden)

    Anda VELICANU

    2010-09-01

    Full Text Available This paper contains a brief description of the most important operations that can be performed on spatial data such as spatial queries, create, update, insert, delete operations, conversions, operations on the map or analysis on grid cells. Each operation has a graphical example and some of them have code examples in Oracle and PostgreSQL.

  13. Operational amplifiers

    CERN Document Server

    Dostal, Jiri

    1993-01-01

    This book provides the reader with the practical knowledge necessary to select and use operational amplifier devices. It presents an extensive treatment of applications and a practically oriented, unified theory of operational circuits.Provides the reader with practical knowledge necessary to select and use operational amplifier devices. Presents an extensive treatment of applications and a practically oriented, unified theory of operational circuits

  14. Numeric models of distributed power generators and stores and their adaptation to the simulation softwaare (e.g. System NETOMAC). Simulation models for long-term operation. Project 5: Numeric models. Final report; Numerische Modelle der dezentralen Energieerzeuger und Speicher, und ihre Anpassung an die Simulationssoftware (u.a. System NETOMAC). Simulationsmodelle fuer den Langzeitbereich. Teilprojekt 5: Numerische Modelle. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Orths, A.; Bachry, A.; Lebioda, A.; Purmann, M.

    2003-09-01

    In the key project 'EDISON', new technologies for electric power supply are investigated systematically. This comprised the development of mathematical models for commercial planning software (NETOMAC) for different decentral power generation systems like cogeneration systems, wind power systems, PV systems and fuel cells. The models will provide integration scenarios including sites for optimal network integration, optimisation of network operation, and network feedback effects. Prior to the start of the project, the available planning software did not include such models, so that the effects of decentral power generation and storage systems in electric power supply grids could not be investigated. (orig.) [German] Im Leitprojekt 'EDISON' wird der Einsatz neuer Technologie in elektrischen Energieversorgungsnetzen systemtechnisch untersucht. Dafuer werden sowohl fuer verschiedene Speicher wie Batteriespeicher, als auch unterschiedliche dezentrale Erzeugungseinheiten wie BHKW, Windkraftanlagen, Photovoltaikanlagen und Brennstoffzellen mathematische Modelle fuer uebliche Planungssoftware (NETOMAC) erarbeitet. Mit den Modellen sollen Einsatzszenarien fuer diese Betriebsmittel abgeleitet und anhand dynamischer Simulationsrechnungen Standorte der optimalen Netzanbindung, die Optimierung des Netzbetriebs und Netzrueckwirkung untersucht werden koennen. Vor Beginn des Projektes fehlten entsprechende Modelle in vorhandener Planungssoftware, so dass die Wirkung von dezentralen Erzeugern und Speichern in elektrischen Energieversorgungsnetzen nicht untersucht werden konnte. (orig.)

  15. Operating systems

    CERN Document Server

    Tsichritzis, Dionysios C; Rheinboldt, Werner

    1974-01-01

    Operating Systems deals with the fundamental concepts and principles that govern the behavior of operating systems. Many issues regarding the structure of operating systems, including the problems of managing processes, processors, and memory, are examined. Various aspects of operating systems are also discussed, from input-output and files to security, protection, reliability, design methods, performance evaluation, and implementation methods.Comprised of 10 chapters, this volume begins with an overview of what constitutes an operating system, followed by a discussion on the definition and pr

  16. Operational calculus

    CERN Document Server

    Boehme, Thomas K

    1987-01-01

    Operational Calculus, Volume II is a methodical presentation of operational calculus. An outline of the general theory of linear differential equations with constant coefficients is presented. Integral operational calculus and advanced topics in operational calculus, including locally integrable functions and convergence in the space of operators, are also discussed. Formulas and tables are included.Comprised of four sections, this volume begins with a discussion on the general theory of linear differential equations with constant coefficients, focusing on such topics as homogeneous and non-ho

  17. UIS Baden-Wuerttemberg. AJA project. Application of JAVA-based solutions in environment, transport and administration. Phase II 2001; UIS Baden-Wuerttemberg. Projekt AJA. Anwendung JAVA-basierter Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung. Phase II 2001

    Energy Technology Data Exchange (ETDEWEB)

    Mayer-Foell, R.; Keitel, A.; Geiger, W. (eds.)

    2001-12-01

    Information and communication technology facilitates data acquisition, recording, evaluation and transmission in many fields of society, but even experts tend to get lost in the flood of data that are available. In order to make it possible to integrate new technological developments in information systems, the Minister of Environment and Transportation continues the project AJA (''Application of JAVA-based solutions'') which was started in 2000. AJA is a sequel to the GLOBUS project which was terminated in 1999. (GLOBUS - Globale Umweltsachdaten im UIS Baden-Wuerttemberg und anderen Systemen). [German] Die Bereiche Umwelt, Verkehr und Verwaltung profitieren bei der Erhebung, Erfassung, Auswertung, Darstellung und Weitergabe ihrer Daten in hohem Masse von Informations- und Kommunikationstechnik (IuK). Manche Darstellungsweisen und Berechnungen werden dadurch erst moeglich. Uebergreifende Zusammenhaenge koennen mit Hilfe der IuK aufgezeigt werden. Die Verwaltung muss Technologien einsetzen, wie sie in der Wirtschaft fuer die Zusammenfuehrung von verteilten Unternehmensdaten verwendet werden, um Entscheidungs grundlagen fuer die Unternehmenspolitik zu liefern (z.B. Data Warehouse). In solchen ''Warenhaeusern von Daten'' finden sich oft nur Experten zurecht. Unsere Herausforderung ist es, diese komplexen Zusammenhaenge nicht nur dem Experten, sondern auch dem Buerger auf moeglichst einfache und wirtschaftliche Weise zu vermitteln. Dem Buerger ist der freie Zugang zu Informationen ueber die Umwelt zu ermoeglichen. Wir sind damit auf dem Wege zu einem Marktplatz von Daten und Informationen fuer den Buerger und die Verwaltung. Um neue technologische Entwicklungen in Informationssystemen einsetzen zu koennen, fuehrt das Ministerium fuer Umwelt und Verkehr (UVM) das 2000 begonnene FuE-Vorhaben AJA ''Anwendung JAVA-basierter Loesungen'' fort. AJA baut auf dem 1999 abgeschlossenen Vorhaben GLOBUS (Globale

  18. Spacecraft operations

    CERN Document Server

    Sellmaier, Florian; Schmidhuber, Michael

    2015-01-01

    The book describes the basic concepts of spaceflight operations, for both, human and unmanned missions. The basic subsystems of a space vehicle are explained in dedicated chapters, the relationship of spacecraft design and the very unique space environment are laid out. Flight dynamics are taught as well as ground segment requirements. Mission operations are divided into preparation including management aspects, execution and planning. Deep space missions and space robotic operations are included as special cases. The book is based on a course held at the German Space Operation Center (GSOC).

  19. Operator substitution

    NARCIS (Netherlands)

    Hautus, M.L.J.

    1994-01-01

    Substitution of an operator into an operator-valued map is defined and studied. A Bezout-type remainder theorem is used to derive a number of results. The tensor map is used to formulate solvability conditions for linear matrix equations. Some applications to system theory are given, in particular

  20. Operation amplifier

    NARCIS (Netherlands)

    Tetsuya, Saito; Nauta, Bram

    2008-01-01

    To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. SOLUTION: The operation amplifier comprises: a differential amplifier circuit 1;

  1. Operation Amplifier

    NARCIS (Netherlands)

    Tetsuya, Saito; Nauta, Bram

    2011-01-01

    PROBLEM TO BE SOLVED: To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. SOLUTION: The operation amplifier comprises: a

  2. Operation Amplifier

    NARCIS (Netherlands)

    Tetsuya, S.; Nauta, Bram

    2007-01-01

    PROBLEM TO BE SOLVED: To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. ; SOLUTION: The operation amplifier comprises: a

  3. Accelerator operations

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Operations of the SuperHILAC, the Bevatron/Bevalac, and the 184-inch Synchrocyclotron during the period from October 1977 to September 1978 are discussed. These include ion source development, accelerator facilities, the Heavy Ion Spectrometer System, and Bevelac biomedical operations

  4. Hanaro operation

    International Nuclear Information System (INIS)

    Lee, Ji Bok; Jeon, Byung Jin; Kwack, Byung Ho

    1997-01-01

    HANARO was configurated its first operating core in 1995. Long term operation test was conducted up to 3-1 cycle during 1996, in order to investigate the reactor characteristics due to fuel depletion and additional fuel loading. Now HANARO has accumulated 168.4 days of total operation time and 2,687.5 MWD of total thermal output. Reactor analysis, producing operation datum and its validation with test, periodic inspection and maintenance of the facility are continuously conducted for safe operation of the HANARO. Conducted the verification tests for installed utilization facilities, and successfully performed the radiation emergency drill. The shutdown report of TRIGA Mark II and III was submitted to MOST, and decommissioning will be started from 1997. (author). 70 tabs., 50 figs., 27 refs

  5. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  6. Operator programs and operator processes

    NARCIS (Netherlands)

    Bergstra, J.A.; Walters, P.

    2003-01-01

    We define a notion of program which is not a computer program but an operator program: a detailed description of actions performed and decisions taken by a human operator (computer user) performing a task to achieve a goal in a simple setting consisting of that user, one or more computers and a

  7. Operator theory

    CERN Document Server

    2015-01-01

    A one-sentence definition of operator theory could be: The study of (linear) continuous operations between topological vector spaces, these being in general (but not exclusively) Fréchet, Banach, or Hilbert spaces (or their duals). Operator theory is thus a very wide field, with numerous facets, both applied and theoretical. There are deep connections with complex analysis, functional analysis, mathematical physics, and electrical engineering, to name a few. Fascinating new applications and directions regularly appear, such as operator spaces, free probability, and applications to Clifford analysis. In our choice of the sections, we tried to reflect this diversity. This is a dynamic ongoing project, and more sections are planned, to complete the picture. We hope you enjoy the reading, and profit from this endeavor.

  8. Operation Starvation

    National Research Council Canada - National Science Library

    Mason, Gerald

    2002-01-01

    More than 1,250,000 tons of shipping was sunk or damaged in the last five months of World War II when Twenty-first Bomber Command executed an aerial mining campaign against Japan known as Operation STARVATION...

  9. Peace Operations

    National Research Council Canada - National Science Library

    Proks, Josef

    2000-01-01

    Peace operations are more and more important in the contemporary world. The end of the Cold War increased not only possibilities of solving disputes by the international community but also by the number and diversity of threats and issues...

  10. Operator training

    International Nuclear Information System (INIS)

    Wirstad, J.

    1983-12-01

    The traditional operator job is changing, which among other things has generated a need for better job training. Surprisingly increased process automation has lead to increased operator qualifications, i.e. basic job training but also up-date and rehearsal training within certain fixed intervals. There are several, similar models for instructional system development available in the literature. One model which is of special interest integrates Operator Training development and Man-Machine Interfaces development. The extent to which Systematic Operator Training has been implemented varies with branches and companies. The nuclear power branch is given as an example in the report. This branch probably represents something better than the average among the process industries.(author)

  11. Operative Links

    DEFF Research Database (Denmark)

    Wistoft, Karen; Højlund, Holger

    2012-01-01

    educational goals, learning content, or value clarification. Health pedagogy is often a matter of retrospective rationalization rather than the starting point of planning. Health and risk behaviour approaches override health educational approaches. Conclusions: Operational links between health education......, health professionalism, and management strategies pose the foremost challenge. Operational links indicates cooperative levels that facilitate a creative and innovative effort across traditional professional boundaries. It is proposed that such links are supported by network structures, shared semantics...

  12. Looking into the causes of deformation processes: The example of an industrial-scale turbine; Ursachenerforschung bei Deformationsprozessen am Beispiel einer Grossturbine

    Energy Technology Data Exchange (ETDEWEB)

    Pfeufer, A [Hannover Univ. (Germany). Geodaetisches Inst.

    1997-12-31

    While quasistatic and kinematic methods for analysis and interpretation of deformation processes reached technical maturity long ago, dynamic models are still in the early development phase. Starting from an outline of the current state of knowledge and a proposal on the definition `Dynamic models`, two fundamentally different dynamic model approaches are described and discussed, i.e. input-output models and state models. Input-output models are discussed in some detail, and the results of such a model when applied to investigations of the deformation characteristics of an industria-scale turbine are presented. (orig.) [Deutsch] Waehrend im Bereich der s.g. quasi-statischen und kinematischen Verfahrensentwicklung zur Analyse und Interpretation von Deformationsprozessen nur noch wenige Verfeinerungen zu erwarten sind, steht man bei der Bereitstellung praxisreifer dynamischer Modelle noch weitestgehend am Anfang einer vielversprechenden Entwicklungsphase. Ausgehend von einem kurzen Ueberblick zum aktuellen Entwicklungsstand und einem Vorschlag zur Definition `Dynamischer Modelle` werden zwei grundsaetzlich verschiedene dynamische Modellansaetze - die Ein-Ausgangs-Modelle und Zustandsmodelle - beschrieben und bezueglich ihrer Vor- und Nachteile diskutiert. Nach einer tiefgruendigeren Behandlung von Ein-Ausgangs-Modellen folgen Ergebnisse der Anwendung eines solchen Modellansatzes zur Untersuchung des Deformationsverhaltens einer Grossturbine. (orig.)

  13. Looking into the causes of deformation processes: The example of an industrial-scale turbine; Ursachenerforschung bei Deformationsprozessen am Beispiel einer Grossturbine

    Energy Technology Data Exchange (ETDEWEB)

    Pfeufer, A. [Hannover Univ. (Germany). Geodaetisches Inst.

    1996-12-31

    While quasistatic and kinematic methods for analysis and interpretation of deformation processes reached technical maturity long ago, dynamic models are still in the early development phase. Starting from an outline of the current state of knowledge and a proposal on the definition `Dynamic models`, two fundamentally different dynamic model approaches are described and discussed, i.e. input-output models and state models. Input-output models are discussed in some detail, and the results of such a model when applied to investigations of the deformation characteristics of an industria-scale turbine are presented. (orig.) [Deutsch] Waehrend im Bereich der s.g. quasi-statischen und kinematischen Verfahrensentwicklung zur Analyse und Interpretation von Deformationsprozessen nur noch wenige Verfeinerungen zu erwarten sind, steht man bei der Bereitstellung praxisreifer dynamischer Modelle noch weitestgehend am Anfang einer vielversprechenden Entwicklungsphase. Ausgehend von einem kurzen Ueberblick zum aktuellen Entwicklungsstand und einem Vorschlag zur Definition `Dynamischer Modelle` werden zwei grundsaetzlich verschiedene dynamische Modellansaetze - die Ein-Ausgangs-Modelle und Zustandsmodelle - beschrieben und bezueglich ihrer Vor- und Nachteile diskutiert. Nach einer tiefgruendigeren Behandlung von Ein-Ausgangs-Modellen folgen Ergebnisse der Anwendung eines solchen Modellansatzes zur Untersuchung des Deformationsverhaltens einer Grossturbine. (orig.)

  14. Applied Operations Research: Operator's Assistant

    Science.gov (United States)

    Cole, Stuart K.

    2015-01-01

    NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

  15. Determination of specific concentration variations of atmospheric trace elements in precipitation as a method for the estimation of spatial deposition into the soil by use of statistical methods; Ermittlung spezifischer Konzentrationsverlaeufe atmosphaerischer Spurenbestandteile in Niederschlaegen als Methode zur Abschaetzung des flaechenhaften Stoffeintrags in den Boden unter Anwendung statistischer Methoden

    Energy Technology Data Exchange (ETDEWEB)

    Busch, U. [Dortmund Univ. (Germany). Fachbereich Statistik; Vautz, W. [Institut fuer Spektrochemie und Angewandte Spektroskopie (ISAS), Dortmund (Germany); Klockow, D. [Institut fuer Spektrochemie und Angewandte Spektroskopie (ISAS), Dortmund (Germany); Urfer, W. [Dortmund Univ. (Germany). Fachbereich Statistik

    1995-08-01

    Witterungsdaten - und die genauere Abschaetzung der raeumlichen Verteilung von Stoffkonzentrationen in Niederschlaegen. Schliesslich wird ein Interpolationsverfahren fuer Depositionsdaten vorgeschlagen, das die geschaetzten Parameter dieser Modelle und Witterungsdaten als zusaetzliche Information verwendet. Seine Anwendung auf die Daten von 1992 ergibt erste Depositionskarten. Der Bericht schliesst mit einigen Vorschlaegen, wie die Ergebnisse aus diesem Projekt in zukuenftigen Untersuchungen zur trockenen Deposition verwendet werden koennten. (orig.)

  16. MR-Imaging optimisation of the articular hip cartilage by using a T{sub 1}-weighted 3-dimensional gradient-echo sequence and the application of a hip joint traction; Magnetresonanztomographische Optimierung der Hueftknorpeldarstellung durch die Wahl einer T{sub 1}-Volumen-Gradienten-Echo-Sequenz und die Anwendung einer Hueftgelenkstraktion

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, R. [Heidelberg Univ. (Germany). Orthopaedische Klinik und Poliklinik; Bernd, L. [Heidelberg Univ. (Germany). Orthopaedische Klinik und Poliklinik; Wrazidlo, W. [ATOS-Praxisklinik, Heidelberg (Germany). Radiologische Gemeinschaftspraxis Drs. Lederer, Schneider und Wrazidlo; Lederer, W. [ATOS-Praxisklinik, Heidelberg (Germany). Radiologische Gemeinschaftspraxis Drs. Lederer, Schneider und Wrazidlo; Schneider, S. [ATOS-Praxisklinik, Heidelberg (Germany). Radiologische Gemeinschaftspraxis Drs. Lederer, Schneider und Wrazidlo

    1995-10-01

    Images of three animal cadaver hips, 8 dissected patient femoral heads and 18 hip joints of human corpses, all either with arthrosis stage I-III or artificial cartilage defects, were compared with their corresponding anatomic sections. Additional histomorphologic examinations of the arthrotic cartilages were conducted, and MR-Imaging of 20 healthy and 21 arthrotic patient hips was performed using a specific traction method. Using a T{sub 1}-weighted 3-dimensional gradient-echo sequence and a traction of the hip joint, it was possible due to the low-signal imaging of the joint space to separate in vivo the high-signal femoral head cartilage from the high-signal acetabular cartilage. In horizontal position of the phase-encoding parameter, minimisation of the chemical-shift artifact, mainly in the ventro-lateral areas, was accomplished. MRI measurements of the articular cartilage widths showed significant correlations (p < 0.001) with the corresponding anatomic sections. At the same time the T{sub 1} 3-dimensional gradient-echo sequence of the lateral femoral head with r = 0.94 showed the lowest deviations of the measurements. It was possible with MR-Imaging to distinguish four cartilage qualities. (orig./MG) [Deutsch] Im experimentellen Teil der Studie wurden den MRT-Bildern von drei Kadavertierhueften, 8 resezierten Patientenhueftkoepfen und 18 Leichenhueftgelenken, an denen entweder artifizielle Knorpeldefekte gesetzt wurden oder die ein Koxarthrose-Stadium I-III aufwiesen, die korrespondierenden makroskopischen Kryomikrotomschnitte zugeordnet. Bei den Koxarthrosen erfolgten zusaetzliche histomorphologische Knorpeluntersuchungen. Im klinischen Teil der Studie wurden 20 gesunde und 21 arthrotische Probandenhueftgelenke mit einem speziellen Traktionsverfahren untersucht. Unter Anwendung einer T{sub 1}-Volumen-Gradienten-Echo-Sequenz und einer Traktion am zu untersuchenden Hueftgelenk konnte in vivo durch die signalarme Darstellung des Gelenkspaltes der

  17. Operating experience

    International Nuclear Information System (INIS)

    McRae, L.P.; Six, D.E.

    1991-01-01

    In 1987, Westinghouse Hanford Company began operating a first-generation integrated safeguards system in the Plutonium Finishing Plant storage vaults. This Vault Safety and Inventory System is designed to integrate data into a computer-based nuclear material inventory monitoring system. The system gathers, in real time, measured physical parameters that generate nuclear material inventory status data for thousands of stored items and sends tailored report to the appropriate users. These data include canister temperature an bulge data reported to Plant Operations and Material Control and Accountability personnel, item presence and identification data reported to Material Control and Accountability personnel, and unauthorized item movement data reported to Security response forces and Material Control and Accountability personnel. The Westinghouse Hanford Company's experience and operational benefits in using this system for reduce radiation exposure, increase protection against insider threat, and real-time inventory control are discussed in this paper

  18. Operator companion

    International Nuclear Information System (INIS)

    Natalizio, A.; Anderson, J.W.D.; Sills, H.E.

    1988-01-01

    Abundant, cheap computing power has provided industry with a far greater opportunity than was available one or two decades ago to automate industrial processes and to improve the man-machine interface. Exciting innovations in knowledge representation methods arising from artificial intelligence research pave the way for advanced support systems for assisting plant operators. AECL has recognized the importance of knowledge based system technology, particularly expert systems, in the achievement of this objective and also, as a strategic technology to be fully exploited in the next generation of CANDU reactors. Operator Companion, an expert system intended to diagnose plant faults and advise the operator on appropriate restoring or corrective actions, is a major undertaking which is receiving support within the research and engineering groups of AECL

  19. Operative arthroscopy.

    Science.gov (United States)

    Guhl, J F

    1979-01-01

    In a period of 20 months, over 200 patients (age ranged from high school students to middle-aged persons) with knee injuries were treated by operative arthroscopy. The majority of the injuries were incurred while the patients had been participating in athletic events, either competitive or recreational. Operative arthroscopy offers the advantage of shortened hospital stay, rapid rehabilitation, lack of disfiguring scar, and reduced costs. Patients are followed yearly after the first postoperative year. Improved long-term results from diagnostic and operative arthroscopy, as compared to conventional surgical procedures, are expected. The proof of those expectations will be determined in the next several years as this group of patients requiring partial meniscectomies or procedures for pathologic and degenerative conditions is reevaluated.

  20. Accelerator operations

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This section is concerned with the operation of both the tandem-linac system and the Dynamitron, two accelerators that are used for entirely different research. Developmental activities associated with the tandem and the Dynamitron are also treated here, but developmental activities associated with the superconducting linac are covered separately because this work is a program of technology development in its own right

  1. Operating Systems

    Indian Academy of Sciences (India)

    areas in which this type is useful are multimedia, virtual reality, and advanced scientific projects such as undersea exploration and planetary rovers. Because of the expanded uses for soft real-time functionality, it is finding its way into most current operating systems, including major versions of Unix and Windows NT OS.

  2. Peace Operations

    National Research Council Canada - National Science Library

    Lewis, William

    1995-01-01

    .... Indeed, despite the energetic leadership of Under Secretary-General Kofi R. Annan who directs the Department of Peacekeeping Operations, the organization has increasing difficulty in acquiring properly trained and equipped forces in time to intervene in conflict situations and humanitarian crises.

  3. Operational Circulars

    CERN Multimedia

    2003-01-01

    Operational Circular N° 4 - April 2003 Conditions for use by members of the CERN personnel of vehicles belonging to or rented by CERN - This circular has been drawn up. Operational Circular N° 5 - October 2000 Use of CERN computing facilities - Further details on the personal use of CERN computing facilities Operational Circular N° 5 and its Subsidiary Rules http://cern.ch/ComputingRules defines the rules for the use of CERN computing facilities. One of the basic principles governing such use is that it must come within the professional duties of the user concerned, as defined by the user's divisional hierarchy. However, personal use of the computing facilities is tolerated or allowed provided : a) It is in compliance with Operational Circular N° 5 and not detrimental to official duties, including those of other users; b) the frequency and duration is limited and there is a negligible use of CERN resources; c) it does not constitute a political, commercial and/or profit-making activity; d) it is not...

  4. Operation Context

    DEFF Research Database (Denmark)

    Stüben, Henning; Tietjen, Anne

    2006-01-01

    Abstract: This paper seeks to challenge the notion of context from an operational perspective. Can we grasp the forces that shape the complex conditions for an architectural or urban design within the notion of context? By shifting the gaze towards the agency of architecture, contextual analysis...

  5. Operational indicators

    International Nuclear Information System (INIS)

    2010-01-01

    The chapter presents the operational indicators related to budget, travel costs and tickets, the evolution of the annual program for regulatory inspection, the scientific production, requested patents and the numbers related to the production of the services offered by the Institution

  6. Alpine solar power station on Sareiserjoch - application of and sturdiness test on a new plastic mounting system; Alpines Solarkraftwerk Sareiserjoch - Anwendung und Haertetest fuer ein neues Kunststoff-Montagesystem

    Energy Technology Data Exchange (ETDEWEB)

    Krause, J. [NEWTEC, Plaston AG, Widnau (Switzerland)

    1997-12-31

    In Malbun in Liechtenstein a grid-connected 22 kW{sub p} PV system has been set up at an altitude of 1900 metres. This system serves its operator as a test of potovoltaics in general and of the mounting systems used in its load-bearing contruction and the fastening of its modules. The present article describes the load-bearing construction and plastic mounting cramp employed. (HW) [Deutsch] Im liechtensteinischen Malbun wurde auf 1900 Metern ueber Meer eine netzgekoppelte 11 kWp-PV-Anlage erstellt, die fuer den Anlagenbetreiber als Test fuer die Photovoltaik im allgemeinen wie auf fuer neue Montagesysteme sowohl bei der Tragkonstruktion als auch bei der Modulbefestigung dienen soll. Tragkonstruktion und Kunststoff-Montageklammer werden dargestellt. (HW)

  7. Two-criteria method for fracture-mechanical analysis of pipelines - practical application and influencing parameters; Zwei-Kriterien-Verfahren zur bruchmechanischen Befundbewertung in Rohrleitungen - praktische Anwendung und Einflussgroessen

    Energy Technology Data Exchange (ETDEWEB)

    Beukelmann, D. [TUeV Sued Industrie Service GmbH (Germany); Doerk, O.; Wernicke, R. [TUeV Nord SysTec GmbH und Co. KG (Germany)

    2006-07-01

    The findings obtained in recurrent inspections as a rule are evaluated by fracture-mechanical analyses. On the basis of the results, it is decided whether a component must be repaired or if operation can continue as it is for the time being. The two-criteria method is applied as a rule because of its universal applicability. Limited ductile crack growth can be taken into account if crack resistance curves are available that can be transferred to the component in question. In the investigations presented here, the influence of the relevant initial variables, e.g. strength coefficents, fracture-mechanical material coefficients, primary and secondary stresses and the intrinsic state of stress is illustrated by exemplary calculations. Further, the safety concepts underlying the assessment are gone into. (orig.)

  8. Measurements of vertical displacement of power station buildings using an automatic stationary hydrostatic measuring system; Anwendung des automatisierten stationaeren hydrostatischen Messsystems fuer die Aufnahme der Vertikalverschiebungen an den Objekten der Kern- und Waermekraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Lechner, J [Forschungsinstitut fuer Geodaesie, Topographie und Kartographie, Zdiby (Czechoslovakia)

    1997-12-31

    The contribution describes hydrostatic stationary measuring systems for measurements of height variations of a turbine unit. The measuring system developed at the research institute and the algorithms for calibration, measurement and evaluation are presented. Measurements were made on a 500 MW turbogenerator unit at different states of operation. (orig.) [Deutsch] Der Beitrag enthaelt eine kurze Uebersicht ueber die hydrostatischen stationaeren Messsysteme fuer das Gebiet der Messung der Hoehenaenderung eines Grossturbinentisches. Es wird das automatische stationaere hydrostatische Messsystem, das im Forschungsinstitut entwickelt wurde, der Algorithmus der Kalibrierung, der Messung und der Auswertung der Messergebnisse vorgestellt. Es wird das Messergebnis der Vertikalverschiebungen der Konstruktion des Turbogenerators mit der Leistung 500 Megawatt bei seinem verschiedenen Betriebszustand angefuehrt. (orig.)

  9. Quality-oriented production of brown-coal coke with due regard to its application in metallurgy and environmental protection; Qualitaetsgerechte Erzeugung von Braunkohlenkoks unter Beruecksichtigung der Anwendung in Metallurgie und Umweltschutz

    Energy Technology Data Exchange (ETDEWEB)

    Achtelik, M.; Erken, M.; Juessen, P.; Knapp, A. [Rheinbraun AG, Koeln (Germany)

    1998-12-31

    In the nineteen seventies the Fortuna Nord refining factory of Rheinbraun AG began to restructure its operations from domestic coal briquetting to the manufacture of industrial products. One of these products, high-temperature brown-coal coke, is produced in two hearth-type furnaces. Coke produced in these plants is mainly used in metallurgy and environmental engineering, in the latter especially for flue gas purification. Rheinbraun has succeeded in introducing a quality management system for brown-coal coke which ensures high quality and security of supply. (orig.) [Deutsch] Im Veredlungsbetrieb Fabrik Fortuna-Nord der Rheinbraun AG begann in den 70er Jahren der Strukturwandel vom Hausbrandbrikett zu Industrieprodukten. Eins dieser Produkte, der Hochtemperatur-Braunkohlenkoks, wird in zwei Herdofenanlagen erzeugt. Die Haupteinsatzbereiche des Herdofenkokses sind die Metallurgie sowie der Umweltschutz und hier insbesondere die Rauchgasreinigung. Um die hohe Produktqualitaet und die Liefersicherheit zu gewaehrleisten, hat Rheinbraun ein Qualitaetsmanagementsystem fuer Braunkohlenkoks erfolgreich eingefuehrt. (orig.)

  10. Measurements of vertical displacement of power station buildings using an automatic stationary hydrostatic measuring system; Anwendung des automatisierten stationaeren hydrostatischen Messsystems fuer die Aufnahme der Vertikalverschiebungen an den Objekten der Kern- und Waermekraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Lechner, J. [Forschungsinstitut fuer Geodaesie, Topographie und Kartographie, Zdiby (Czechoslovakia)

    1996-12-31

    The contribution describes hydrostatic stationary measuring systems for measurements of height variations of a turbine unit. The measuring system developed at the research institute and the algorithms for calibration, measurement and evaluation are presented. Measurements were made on a 500 MW turbogenerator unit at different states of operation. (orig.) [Deutsch] Der Beitrag enthaelt eine kurze Uebersicht ueber die hydrostatischen stationaeren Messsysteme fuer das Gebiet der Messung der Hoehenaenderung eines Grossturbinentisches. Es wird das automatische stationaere hydrostatische Messsystem, das im Forschungsinstitut entwickelt wurde, der Algorithmus der Kalibrierung, der Messung und der Auswertung der Messergebnisse vorgestellt. Es wird das Messergebnis der Vertikalverschiebungen der Konstruktion des Turbogenerators mit der Leistung 500 Megawatt bei seinem verschiedenen Betriebszustand angefuehrt. (orig.)

  11. Site operations

    International Nuclear Information System (INIS)

    House, W.B.; Ebenhack, D.G.

    1989-01-01

    This chapter is a discussion of the management and operations practices used at the Barnwell Waste Management Facility in Barnwell, SC. The following topics are discussed: (1) Waste receiving and inspection, including manifest and certificates of compliance, radiological surveys, disposition of nonconforming items, and decontamination and disposition of secondary waste streams; (2) Waste disposal, including Title 10 CFR 61 requirements, disposal area evaluations, shipment offloading, container emplacement, and radiation protection; (3) Trench closure, including trench backfilling, trench capping, and permanent markers; (4) Site maintenance and stabilization, including trench maintenance, surface water management, and site closure activities; (5) Site monitoring programs, including operational monitoring, and environmental monitoring program; (6) Personnel training and qualifications, including basic training program, safety training program, special skills training, and physical qualifications; (7) Records management, including waste records, personnel training records, personnel dosimetry records, site monitoring records, trench qualification and construction records, and site drawings and stabilization records; (8) Site security; (9) Emergency response plans; and (10) Quality assurance

  12. Operators perspective

    International Nuclear Information System (INIS)

    Scragg, D.M.

    1991-01-01

    There are very few Energy from Municipal Waste processing plants in the U.K. Those which were built have usually been financed and operated by Local Authorities and are now in excess of 17 years old. The Environmental Protection Act and constraints on Public Sector spending have brought about fundamental changes in the approach taken to developing new schemes of this kind. The Public Sector and the Private Sector must work together. The investment in Mass Burning Incineration Schemes generating energy is high and the pressures to keep the waste disposal costs as low as possible mean that recovery of the investment needs to be spread over many years. For any Scheme to be successful and financially viable requires a long term commitment on the part of those involved. This paper sets out the key role which the Operating Contractor can play in this situation. (author)

  13. Operating Cigeo

    International Nuclear Information System (INIS)

    Launeau, F.

    2016-01-01

    The CIGEO facility dedicated to the geological disposal of high- and intermediate-level radioactive wastes will be composed of 2 parts: an underground facility at a depth of 500 m to dispose the waste packages in tunnels and a surface facility to take delivery of the wastes and prepare the packages. The underground facility will be built progressively and will cover a surface of 15 km 2 at the end of Cigeo operating-life. A large part of the surface facility (located a few km away from the waste reception place) will be dedicated to the works led deep underground to build the tunnels and will receive drilling cuttings. The article describes also the ramp and carts to lead waste packages underground. Most of the operations will be automated. The definitive closure of the tunnels will be made with swelling clay and concrete plugs. (A.C.)

  14. Operation Poorman

    International Nuclear Information System (INIS)

    Pruvost, N.; Tsitouras, J.

    1981-01-01

    The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system

  15. Investigations of glass sealing and reactive air brazing materials for joining high temperature solid oxide fuel cells by dilatometric examinations; Anwendung dilatometrischer Messungen bei der Entwicklung von Glasloten und reaktiven Metallloten zum Fuegen von Hochtemperaturbrennstoffzellen

    Energy Technology Data Exchange (ETDEWEB)

    Reichle, M.S. [Parker Hannifin GmbH, Bietigheim-Bissingen (Germany); Federmann, D. [Forschungszentrum Juelich GmbH, ZAT, Juelich (Germany); Reisgen, U. [RWTH Aachen University, ISF, Aachen (Germany); Koppitz, T.

    2011-03-15

    The principle of operation of solid oxide fuel cells (SOFCs) is very simple. However, the fact that very different materials are used for the individual components requires advanced thermal joining techniques to join them in a functional manner. Two very distinct designs have established themselves for the two different intended applications: decentralised power generation (stationary SOFCs) on the one hand, and power converters for vehicles (mobile SOFCs) on the other hand. As a consequence, alternative techniques for joining the individual components are also required. The principal joining process for the stationary SOFC design consists of joining individual steel plates with a glass sealant in an electrically insulating way so that they form an SOFC stack. For the mobile fuel cell design, the SOFC stack consists of individual thin steel cassettes. The window frame of the cassettes, which is made of ferritic chromium steel, is brazed to the ceramic layer of the zirconium oxide solid electrolyte using a filler metal. The material used is a silver-based brazing filler metal which contains only small amounts of copper oxide (CuO) and titanium hydride (TiH{sub 2}) as wetting agents. Both joining processes must be applicable in normal atmospheric air, i. e. under oxidative conditions. R and D activities continue for improving the efficiency and long-term operational stability of the technology to such an extent that SOFCs will become ready for the energy sector market. The two joining techniques described cannot yet be considered standard processes. They, too, will require continuous improvement with respect to reproducibility, endurance and strength of the joints. The Special Joining Techniques working group at Forschungszentrum Juelich uses specially modified dilatometric techniques as suitable quick replacement methods for studying and measuring the joining characteristics of the materials without having to manufacture complex and expensive SOFC stacks. The

  16. A model for the description of the coolant mixing and its application to the analysis of boron dilution transients in pressurized water reactors; Ein Modell zur Beschreibung der Kuehlmittelvermischung und seine Anwendung auf die Analyse von Borverduennungstransienten in Druckwasserreaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Kliem, Soeren

    2010-08-15

    A model for the realistic description of the coolant mixing inside the pressure vessel of a pressurized water reactors has been developed and validated. This fast running model is based on the linear superposition of response functions on Dirac-pulse-like perturbations of the coolant parameters. It has been implemented into the coupled code system DYN3D/ATHLET nad serves as the interface between the one-dimensional thermal hydraulic system code ATHLETE and the 3D neutron kinetic core model DYN3D. By help of this model, the coolant mixing inside the reactor pressure vessel can e simulated in an efficient manner. A methodology for this analysis of hypothetical boron dilution accidents has been developed, which is based on the newly developed model for the coolant mixing. This methodology consists of a combination of stationary and transient calculations including a realistic treatment of the mixing of deborated slugs on the way towards the reactor core. The degree of conservatism can be adjusted by the variation of the initial size of the deborated slug. This new method was applied to two different boron dilution accidents. Besides the start of the first main coolant pump with a deborated slug of coolant in the cold leg of the primary circuit, a deboration event during the operation of the residual heat removal system was investigated. The results of the parameter study for a reactor core with a generic loading pattern demonstrated in both cases, that although the shut-down reactor becomes re-critical safety relevant cladding temperature limits are not reached, even if maximum possible volumes of the deborated slug are considered. The main reason for these results is the use of realistic time-dependent distributions of the boron concentration at the inlet of each fuel assembly.

  17. Scaling up manufacturing of ZnO thin layers for application in flexible dye-sensitized solar cells; Aufskalierung der Herstellung von ZnO-Duennschichten fuer die Anwendung in flexiblen farbstoffsensibilisierten Solarzellen

    Energy Technology Data Exchange (ETDEWEB)

    Bittner, Florian

    2012-10-19

    to demonstrate the suitability for scale-up of the fabrication method of ZnO/eosin Y hybrid layers. This miniplant setup was characterised in detail and appropriate deposition parameters have been determined. Porous ZnO layers have been prepared successfully on FTO glass substrates on an area of 38.88 cm{sup 2} and on ITO-PET plastic substrates on an area of 34.56 cm{sup 2}. The suitability of the fabricated layers for the assembly of flexible dye-sensitized solar cells has been demonstrated by means of several operative modules. While these modules achieved decent conversion efficiencies of up to 2.58 % under low light intensities, strongly decreasing conversion efficiencies were observed with increasing light intensities. Too high series resistances have been identified as the cause. (orig.)

  18. Development of an advanced dispersion model for regulatory purposes; Ueberpruefung der Grundlagen der Ausbreitungsrechnung der TA Luft im Hinblick auf eine EG-Harmonisierung: Entwicklung eines fortschrittlichen Ausbreitungsmodells zur Anwendung im Rahmen von Genehmigungsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Scherer, B.; Reimer, E. [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie; Yamartino, R.J. [Earth Tech., Inc., Concord, MA (United States); Klug, W. [Technische Hochschule Darmstadt (Germany). Inst. fuer Meteorologie

    1998-12-01

    A new Lagrangian Particle Model and a meteorological suite to operate the model were developed during phase 1 of the project. The model-system was applied for a long term calculation. The new Kinematic Simulation Particle Dispersion Model (KSP) uses Kinematic Simulation and Monte-Carlo (KS-MC) theory to calculate sub-grid flowfields. It calculates snapshots of concentrations rater then ensemble mean values. It can also directly provide higher moments of concentrations, C{sup (n)}(t) and is applicable for odour problems as well. The model is applicable in a wide spatial (<10-10{sup 3} km) and temporal scale (sec. to years). The meteorological model TRAMPER includes a date archive 3d Objective Analysis with statistical O/I method and a 1-d boundary-layer model as well as prognostic non-hydrostatic model (GESIMA). The analysis provides a three dimensional and time dependent description of relevant meteorological scalar and vector quantities also trajectories in a approx. 30 km grid resolution. Higher resolution is gained by GESIMA (example). As an alternative driver the CALMET Meteorological Model is presented. The evaluation of the KSP will take place in phase 2. Only preliminary results are shown in the report. (orig.) [German] In Phase 1 des Vorhabens wurde ein neues Lagrange - Partikel - Modell (LPM) mit einer meteorologischen Simulationsumgebung (Treiber) entwickelt und fuer eine immissionsklimatologische Berechnung eingesetzt. Das 'Kinematic Simulation Particle' - Ausbreitungsmodell (KSP) arbeitet mit einem subskaligen Stroemungsprozessor nach der 'Kinematic Simulation - Monte Carlo-Methode. Es berechnet Momentanwerte und nicht Ensemblemittelwerte sowie Varianzen und hoehere zeitliche Momente der Konzentration C{sup (n)}(t) und ist fuer die Geruchsausbreitungsrechnung geeignet. Das Verfahren erfasst einen weiten raeumlichen (<10-10{sup 3} km) und zeitlichen Skalenbereich (Sek. bis Jahre). Das meteorologische Modellsystem TRAMPER als Treiber

  19. Operator errors

    International Nuclear Information System (INIS)

    Knuefer; Lindauer

    1980-01-01

    Besides that at spectacular events a combination of component failure and human error is often found. Especially the Rasmussen-Report and the German Risk Assessment Study show for pressurised water reactors that human error must not be underestimated. Although operator errors as a form of human error can never be eliminated entirely, they can be minimized and their effects kept within acceptable limits if a thorough training of personnel is combined with an adequate design of the plant against accidents. Contrary to the investigation of engineering errors, the investigation of human errors has so far been carried out with relatively small budgets. Intensified investigations in this field appear to be a worthwhile effort. (orig.)

  20. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ... Your Lung Operation Read Next Your Discharge and Recovery Back to Top Find A Surgeon Find A ...

  1. Operating requirements for power plants in the liberalised electricity market; Einsatzanforderungen an Kraftwerke im liberalisierten Strommarkt

    Energy Technology Data Exchange (ETDEWEB)

    Schwarzbach, G. [Vereinigte Energiewerke AG, Berlin (Germany)

    2000-07-01

    The onset of liberalisation in the German electricity market now dates back one and a half years. All processes related to this event are still in a process of rapid change. These developments have already led to a substantial drop in electricity prices, especially for large customers, leaving suppliers with modest margins. Power supply companies such as VEAG, whose operations in East Germany include power transmission, electricity production from brown coal and wholesale trade, are taking measures to meet the new demands placed on them. Unbundling regulations and market processes are forcing companies to review their organisational and operational structures. Risk management, controlling and DP support for processes are indispensable. Profit centre structures and internal performance accounting systems are being used to distribute the market pressure evenly across the company's divisions. Companies' future success will be determined by their success in trading and selling. These developments will also have an impact on power plants, i.e. on the first stage of the supply chain. For one thing, the costs of power plant operation have to be reduced significantly. Reductions in staff costs will necessitate a review of technological processes. Furthermore, maintenance strategies and availability goals have to be reassessed. Another crucial factor is to be seen in power plants' operational flexibility, and this will also have an impact on fuel supply contracts. A particular concern of single-plant companies and small generation systems will be how to deal with strong fluctuations in demand and meet the hourly supply schedules agreed on with the customer without having to resort to the expensive regulating services of the grid operators. Electricity produced in excess of demand will find not always find buyers, not even after the establishment of physical electricity exchanges. Another factor which will increase the volatility of required power generation

  2. UIS Baden-Wuerttemberg. Project AJA. Application of JAVA-based and other efficient solutions in the areas of environment, traffic and administration. Phase V 2004; UIS Baden-Wuerttemberg. Projekt AJA. Anwendung JAVA-basierter und anderer leistungsfaehiger Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung. Phase V 2004

    Energy Technology Data Exchange (ETDEWEB)

    Mayer-Foell, R.; Keitel, A.; Geiger, W. (eds.)

    2004-12-01

    Bundeslaendern die Umsetzung von Verwaltungsreformen - in Baden-Wuerttemberg der Vollzug des Verwaltungsstruktur-Reformgesetzes (VRG) - sowie die Umsetzung von e-Government-Konzepten derzeit zu zusaetzlichen Anforderungen an die Verwaltung und ihre IuK-Technik. Durch den Einsatz innovativer Informationstechnologien kann in vielen Bereichen ein bedeutender Beitrag zur Erfuellung dieser Anforderungen geleistet werden; genannt seien hier Portal-, Content-Management- und Integrations-Technologien sowie neue Techniken fuer den Web-basierten und mobilen Zugriff auf Informationen. Entwicklung uf Pflege der neuen Informations- und Kommunikationssysteme erfordern oft nicht unerhebliche Mittel. Aufgrund der knappen Haushaltslage der Gebietskoerperschaften koennen diese Mittel von den einzelnen zustaendigen Stellen zunehmend nicht mehr aufgebracht werden. Auch wuerden Einzelentwicklungen nicht den Anforderungen zum sparsamen Umgang mit Haushaltsmitteln und groesstmoeglicher Effektivitaet der eingesetzten Mittel entsprechen. Ein wichtiges Mittel, um diese Herausforderung zu bewaeltigen, ist die verstaerkte Zusammenarbeit der Gebietskoerperschaften bei der Entwicklung und Pflege der Informationssysteme. Um die Zusammenarbeit innerhalb des Landes Baden-Wuerttemberg sowie mit dem Bund und anderen Laendern zu foerdern, wurde Ende 1999 das F+E-Projekt AJA (Anwendung JAVA-basierter und anderer leistungsfaehiger Loesungen in den Bereichen Umwelt, Verkehr und Verwaltung) gegruendet. Das Projekt AJA ist im Jahr 2004 in seine fuenfte Phase gegangen und wird mit dieser Phase abgeschlossen. Der vorliegende Bericht ist die Projektdokumentation der Phase V von AJA im Jahr 2004. Er gibt die Aufgabenstellungen und die Ergebnisse der 19 F+E-Arbeiten wieder. (orig.)

  3. Operational Law Handbook,2007

    National Research Council Canada - National Science Library

    2007-01-01

    ... & SOFAs, legal assistance, combating terrorism, domestic operations, noncombatant evacuation operations, special operations, civil affairs, air, sea, and space law, detainee operations, reserve...

  4. Turbulence models development and engineering applications; Turbulenzmodellentwicklung und ingenieurtechnische Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Groetzbach, G.; Ammann, T.; Dorr, B.; Hiltner, I.; Hofmann, S.; Kampczyk, M.; Kimhi, Y.; Seiter, C.; Woerner, M.; Alef, M.; Hennemuth, A.

    1995-08-01

    The FLUTAN code is used for analyzing the decay heat removal in new reactor concepts. The turbulence models applied in FLUTAN are improved by the development of the TURBIT code. TURBIT serves for a numerical simulation of turbulent channel flow. (orig.)

  5. Sensors - technology and application. Sensoren - Technologie und Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The development of sensors could not keep pace with the progress made in microelectronics. The monolithic integration of sensor and signal processing circuits was realised in some cases. More development is needed though before they can be applied in microelectronics, household appliances and automobiles. Descriptions are supplied of: new materials and technologies for sensors, sensor systems, sensors for mechanical parameters, temperatures, chemical paramters and sensors on magnetic basis.

  6. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... You Want to Be a Surgeon Resident Resources Teaching Resources Online Guide to Choosing a Surgical Residency ... After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after the operation ...

  7. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Medical Student Core Curriculum ACS/ASE Medical Student Simulation-Based Surgical Skills Curriculum Cancer Education Cancer Education ... Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD After Your Operation ...

  8. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Overview ACS-AEI Consortium Quarterly ACS Chapter News Cancer ... American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD After Your Operation ...

  9. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Liability Surgeons as Advocates Surgeons and Bundled Payment Models Surgeons as Institutional Employees Our Changing Health Care ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ...

  10. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Safety Resources About the Patient Education Program The Recovery Room Choosing Wisely Educational Programs Educational Programs Educational ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ...

  11. Operator theory, operator algebras and applications

    CERN Document Server

    Lebre, Amarino; Samko, Stefan; Spitkovsky, Ilya

    2014-01-01

    This book consists of research papers that cover the scientific areas of the International Workshop on Operator Theory, Operator Algebras and Applications, held in Lisbon in September 2012. The volume particularly focuses on (i) operator theory and harmonic analysis (singular integral operators with shifts; pseudodifferential operators, factorization of almost periodic matrix functions; inequalities; Cauchy type integrals; maximal and singular operators on generalized Orlicz-Morrey spaces; the Riesz potential operator; modification of Hadamard fractional integro-differentiation), (ii) operator algebras (invertibility in groupoid C*-algebras; inner endomorphisms of some semi group, crossed products; C*-algebras generated by mappings which have finite orbits; Folner sequences in operator algebras; arithmetic aspect of C*_r SL(2); C*-algebras of singular integral operators; algebras of operator sequences) and (iii) mathematical physics (operator approach to diffraction from polygonal-conical screens; Poisson geo...

  12. Operative und medikamentöse Therapie der Endometriose/Adenomyose

    Directory of Open Access Journals (Sweden)

    Schindler AE

    2008-01-01

    Full Text Available Endometriose ist eine der häufigsten gutartigen, proliferativen Erkrankungen der Frau. Die Therapie konzentriert sich auf drei Problemkreise: 1. Schmerzen (vor allem zyklusabhängige Beschwerden, aber auch zyklusunabhängige Beschwerden, Blasenbeschwerden und Darmbeschwerden, 2. Fertilitätsstörungen (gestörte Konzeption und erhöhte Abortrate, 3. Beeinträchtigung von Organen bzw. Organfunktionen (z. B. Ureterstenose, Darmstenose, Blasenwandinfiltration. Da die Endometriose eine progressive Erkrankung mit hoher Rezidivhäufigkeit ist und während der Funktion der Ovarien immer wieder neue Herde entstehen können, kommt der Therapie ein besonderer Stellenwert zu. Für eine erfolgreiche Behandlung ist eine möglichst frühe Erkennung der Endometriose wichtig. Therapeutisch stehen operative Verfahren zur Verfügung, die zum Ziel haben, möglichst alle sichtbaren Endometriosegewebe zu entfernen und, falls Schwangerschaft erwünscht ist, fertilitäts- und organerhaltend zu operieren. Art und Umfang des operativen Vorgehens sind abhängig vom Befund. Für die medikamentöse Behandlung steht eine Reihe von Substanzgruppen und Präparaten zur Verfügung. Dazu gehören: 1. Östrogen/Gestagen-Kombination (Pille, wenn möglich als Langzyklus, 2. Gestagene in kontinuierlicher Anwendung und mit dem Ziel, eine Amenorrhoe zu erreichen, um einen optimalen klinischen Effekt zu erzielen, 3. GnRH-Agonisten, die am effektivsten zur Funktionsruhe der Ovarien führen und damit auf die Endometriose einwirken, wobei die durch den Östrogenentzug herbeigeführten Symptome durch eine sogenannte Add-back-Therapie kontrolliert werden können. Dies trifft auch für den Knochendichteverlust zu. Man muss aber beachten, dass diese medikamentösen Therapieformen maximal eine Rückbildung der Endometriose bewirken können. Bei Beendigung der Behandlung (chirurgisch oder medikamentös ist in ein bis mehreren Jahren mit Rezidiven oder neuen Endometrioseherden zu rechnen

  13. A Survey on Operator Monotonicity, Operator Convexity, and Operator Means

    Directory of Open Access Journals (Sweden)

    Pattrawut Chansangiam

    2015-01-01

    Full Text Available This paper is an expository devoted to an important class of real-valued functions introduced by Löwner, namely, operator monotone functions. This concept is closely related to operator convex/concave functions. Various characterizations for such functions are given from the viewpoint of differential analysis in terms of matrix of divided differences. From the viewpoint of operator inequalities, various characterizations and the relationship between operator monotonicity and operator convexity are given by Hansen and Pedersen. In the viewpoint of measure theory, operator monotone functions on the nonnegative reals admit meaningful integral representations with respect to Borel measures on the unit interval. Furthermore, Kubo-Ando theory asserts the correspondence between operator monotone functions and operator means.

  14. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... to Participate Resources Webinars for Young Surgeons YFA E-News YFA Advocacy Essay Contest Resident and Associate ... ACS Leader International Exchange Scholar Program Resources RAS E-News Medical Students Operation Giving Back Operation Giving ...

  15. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Careers at ACS Careers at ACS About ACS Career Types Working at ACS ... ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD ...

  16. Solar cooling. Dynamic computer simulations and parameter variations; Solare Kuehlung. Dynamische Rechnersimulationen und Parametervariationen

    Energy Technology Data Exchange (ETDEWEB)

    Adam, Mario; Lohmann, Sandra [Fachhochschule Duesseldorf (Germany). E2 - Erneuerbare Energien und Energieeffizienz

    2011-05-15

    The research project 'Solar cooling in the Hardware-in-the-Loop-Test' is funded by the BMBF and deals with the modeling of a pilot plant for solar cooling with the 17.5 kW absorption chiller of Yazaki in the simulation environment of MATLAB/ Simulink with the toolboxes Stateflow and CARNOT. Dynamic simulations and parameter variations according to the work-efficient methodology of design of experiments are used to select meaningful system configurations, control strategies and dimensioning of the components. The results of these simulations will be presented and a view of the use of acquired knowledge for the planned laboratory field tests on a hardware-in-the-loop test stand will be given. (orig.)

  17. Dynamic Interplay between Varicelloviruses and their Primate Hosts : Dynamische Wisselwerking tussen Varicellovirussen en hun Primaten Gastheer

    NARCIS (Netherlands)

    W.J.D. Ouwendijk (Werner )

    2013-01-01

    markdownabstract__Abstract__ Varicella-zoster virus (VZV) is a ubiquitous human alphaherpesvirus (αHHV). Most individuals become infected with VZV during childhood typically resulting in generalized vesicular skin rash, although a minority of individuals will not develop evident skin rash. During

  18. Structure dynamics with regard to non-linear support behavior; Dynamische Strukturberechnung unter Beruecksichtigung nichtlinearen Lagerverhaltens

    Energy Technology Data Exchange (ETDEWEB)

    Driessen, W. [Technischer Ueberwachungs-Verein Nord e.V., Hamburg (Germany)

    2000-07-01

    Because of modifications to a feed-water line of a power plant structural calculations of the pipework were performed. As a result of a linear (modal) analysis very high restraint forces on the supports were calculated. In order to reduce conservatisms in the calculation the model was optimized with regard to the support stiffnesses and nonlinear behavior of slide bearings, guides and shock absorbers were taken into account. The main result of the non-linear analysis, which was performed by methods of direct-integration, was that nonlinearity yields evident differences in structural frequencies and in energy dissipation (damping) in comparison to the linear analysis. The high restraint forces on the supports became smaller for most of the supports but at some points the forces of the non-linear analysis were even higher. So the conservatism of the linear analysis is not fully valid for the whole structure. The relevance of the non-linear effects in dynamic piping calculations is shown by comparing the calculation result with measurements which were performed on structures in the plant. (orig.) [German] Im Rahmen der Aenderung der Speisewasserleitung einer Kraftwerksanlage wurde die Struktur neu berechnet. Die Analysen mit einem linearen Modell (modal), das ueblicherweise verwendet wird, ergaben hohe Lasten an Halterungen. Zum Abbau von Konservativitaeten wurde eine realistischere Modellierung durch die Beruecksichtigung des nichtlinearen Verhaltens der in der Anlage befindlichen Gleitlager, Fuehrungen und Stossbremsen in der Berechnung vorgenommen. Die Untersuchungen haben ergeben, dass durch die Nichtlinearitaet das Frequenzverhalten der Struktur und die Dissipation von Energie durch Reibvorgaenge wesentlich beeinflusst werden. Des Weiteren ist festzustellen, dass aus linearen Analysen nicht uneingeschraenkt konservative Ergebnisse gewonnen werden. Die Relevanz der Beruecksichtigung des nichtlinearen Lagerverhaltens bei einer dynamischen Strukturberechnung wird hier anhand eines Vergleiches mit einer der im Rahmen der In-Betrieb-Setzung des Kraftwerks gemessenen Verschiebungen aufgezeigt. (orig.)

  19. Signatures of dynamics in charge transport through organic molecules; Dynamisches Verhalten beim Ladungstransport durch organische Molekuele

    Energy Technology Data Exchange (ETDEWEB)

    Secker, Daniel

    2008-06-03

    The aim of the thesis at hand was to investigate dynamical behaviour in charge transport through organic molecules experimentally with the help of the mechanically controlled break junction (MCBJ) technique. the thesis concentrates on the complex interaction between the molecular contact configuration and the electronic structure. it is shown that by variation of the electrode distance and so by a manipulation of the molecule and contact configuration the electronic structure as well as the coupling between the molecule and the electrodes is affected. The latter statement is an additional hint how closely I-V-characteristics depend on the molecular contact configuration. Depending on the applied voltage and so the electric field there are two different configurations preferred by the molecular contact. A potential barrier between these two states is the origin of the hysteresis. A central part of the thesis is dealing with measurements of the current noise. Finally it can be concluded that the detailed discussion reveals the strong effect of dynamical interactions between the atomic configuration of the molecular contact and the electronic structure on the charge transport in single molecule junctions. (orig.)

  20. Dynamical symmetries of atomic nuclei at subshell closures; Dynamische Symmetrien von Atomkernen an Unterschalenabschluessen

    Energy Technology Data Exchange (ETDEWEB)

    Muecher, Dennis

    2009-04-28

    Within this thesis the influence of subshell closures at neutron numbers N=40 and N=56 upon nuclear structure was examined. The work was focussed on the nucleus {sup 70}Zn that has been studied by a series of experiments. Firstly a photon-scattering experiment was performed at the University of Stuttgart in order to revise the lifetime of the 2{sup +}{sub 2} state in {sup 70}Zn. Furthermore {sup 70}Zn was measured using monoenergetic neutrons at the University of Kentucky yielding many decisive corrections to the low-energy level scheme. In addition, magnetic moments of shortlived states were investigated with the method of transient magnetic fields. As a consequnce of these results it was shown that the nucleus {sup 70}Zn can be described within the F spin symmetric dynamical symmetry U(5) of the IBM-2. A new interpretation was given for the inconvenient behavior of the 0{sup +}{sub 2} and 2{sup +}{sub 3} level. The 2{sup +}{sub 3} state was proposed as the mixedsymmetry state 2{sup +}{sub 1,ms}. Furthermore candidates for the mixed-symmetry states of higher phonon order were presented. It was shown that strong mixing of the involved states occurs. The exceptional behavior of the 2{sup +}{sub 1,ms} states in the even-even zinc isotopes was interpreted as a breaking of the F spin symmetry at the transition to an isospin symmetric system. Experiments with radioactive beams of the nuclei {sup 88}Kr and {sup 92}Kr were presented as well. This was done to show how far mixed symmetry states can be studied using radioactive ion beam experiments in the future. (orig.)

  1. Dynamic simulation of periodic adsorption heat pumps. Dynamische Simulation periodischer Adsorptionswaermepumpen

    Energy Technology Data Exchange (ETDEWEB)

    Foellinger, T.

    1989-01-01

    Periodic asorption heat pumps with water as working fluid and two types of zeolites as adsorption agents were studied theoretically by a dynamic simulation analysis in order to find out whether they are suited as high-temperature heat pumps for heat recovery. Variants with one and two pairs of containers were investigated. Internal heat transfer is possible between the containers of each pair, and shifting temperature and load profiles (zoned sorption) are generated inside the containers in order to raise the heat ratio (efficience). The heat ratios are clearly higher than in ammonia/water heat pumps of the same size. The external heat transfer is kept constant by means of control elements and buffer systems, so that the periodic heat pump can be integrated in a continuous process. A pilot plant was developed on the basis of the results, with particular interest taken in the design of the liquid/solid heat transfer media. (orig.) With 47 figs., 3 tabs.

  2. Adaptiver, Interaktiver, Dynamischer Atlas zur Geschichte (AIDA. Visuelles Erkunden und interaktives Erleben der Geschichte

    Directory of Open Access Journals (Sweden)

    Christoph Schäfer

    2015-04-01

    Full Text Available The objective of the AIDA project is the development of a dynamic and adaptive digital atlas on the history of Europe as well as the Mediterranean region for research and education purposes. Dynamic maps enable the visualization of temporal and spatial localization as well as their changes concerning objects and events and mediate historical processes over a long ranged period. Through the inclusion of text and image the map as a system of symbols and rules becomes a key medium for the collection of multimedia data. The conjunction of space and time and the free combination and connection of very different content opens new questions and enlarges the data basis of the system embedding user driven projects. This paper focuses on the architecture of the AIDA – project as well as the Meme Media – technology “Webbles” used for its implementation. The visualization and analysis of spatiotemporal information will be thematised as well as didactic surplus of the system concluding with the presentation of three pilot projects.

  3. De integrale beplantingsmethode, naar een dynamische benadering voor het ontwerpen van beplantingen

    NARCIS (Netherlands)

    Ruyten, F.

    2006-01-01

    Public parks and gardens (planting structures) in urban areas are subject to various forms of human intervention, based on traditional planting methods. These forms of intervention are related to the creation of individual space required for mature growth of ligneous plants by thinning or by

  4. Automation of the driving using the dynamic programming; Automatisierung des Treibens mittels diskreter dynamischer Programmierung

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zongru; Buerger, Sebastian; Lohmann, Boris [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl fuer Regelungstechnik

    2009-07-01

    Driving is a metal forming process throughout hammering in cold state. It can create almost any 2D and 3D metal sheets using universal tools. During driving, many parameters of the tools and the sheets affect the forming process, which inhibits a complete automation. In this paper, a model based control for a 2D driving process is proposed. The process of stretching L-shaped metal sheets is analytically modelled. Three phases, namely hybrid deformations, material flow as well as springback and inverse bending, describe the deformation process at one stroke. This results in a nonlinear (non-affine), time-discrete state space model. A model predictive controller (MPC) is then designed to determine the optimal control inputs at every time step. Thereby, an objective function that describes the costs from a start angle to an end condition is minimized by means of discrete dynamic programming (DDP). (orig.)

  5. Ein dynamisches Multi-Akteurs-Modell zur integrierten Bewertung des Klimawandels

    OpenAIRE

    Weber, M.

    2004-01-01

    The interactions between climate and the socio-economic system are investigated with a Multi-Actor Dynamic Integrated Assessment Model (MADIAM) obtained by coupling a nonlinear impulse response model of the climate sub-system (NICCS) to a multi-actor dynamic economic model (MADEM). The main goal is to initiate a model development that is able to treat the dynamics of the coupled climate socio-economic system, including endogenous technological change, in a non-equilibrium situation, thereby o...

  6. DIMITRI 1.0: Beschrijving en toepassing van een dynamisch input-output model

    NARCIS (Netherlands)

    Wilting HC; Blom WF; Thomas R; Idenburg AM; LAE

    2001-01-01

    DIMITRI, the Dynamic Input-Output Model to study the Impacts of Technology Related Innovations, was developed in the framework of the RIVM Environment and Economy project to answer questions about interrelationships between economy, technology and the environment. DIMITRI, a meso-economic model,

  7. Dynamic function MR of the cervical vertebral column. Dynamische Funktions-MRT der Halswirbelsaeule

    Energy Technology Data Exchange (ETDEWEB)

    Naegele, M.; Woell, B.; Reiser, M. (Radiologische Universitaetsklinik, Bonn (Germany)); Koch, W. (Orthopaedische Universitaetsklinik, Bonn (Germany)); Kaden, B. (Neurochirurgische Universitaetsklinik, Bonn (Germany))

    1992-09-01

    To obtain functional studies of the cervical spine, a device has been developed which allows MRI examinations to be carried out in five different degrees of flexion. T[sub 1] and T[sub 2][sup *] weighted FFE sequences were used. Dynamic functional MRI was performed on 5 normals and 31 patients (5 disc herniation, 4 whiplash injuries, 6 spinal canal stenoses, 14 laminectomies and spinal fusions, 2 rheumatoid arthritis). The relationship of the spinal cord to the bony and ligamentous components in different degrees of flexion was particularly well shown in whiplash injury, spinal stenosis and postoperative situations. (orig.).

  8. Dynamische Programm-Code-Verwaltung und -Optimierung für eingebettete Systeme

    OpenAIRE

    Schell, Dominic

    2009-01-01

    Bei Desktop-PCs ist ein großer Hauptspeicherausbau im Bereich jenseits von 1 GB dank gesunkener Speicherpreise und auf Grund gestiegener Anforderungen keine Seltenheit mehr. Es existiert jedoch eine Unmenge Kleinstrechner, wie z.B. im Automobilbereich eingesetzte Steuergeräte, die sich einen großen Speicherausbau wegen des Platzbedarfs der Speicherchips, deren Energiekonsum und den zusätzlichen Kosten nicht leisten können. Ein wichtiges Ziel beim Erzeugen der Software für eingebettete Systeme...

  9. Dynamische inlichtingenanalyse met MARVEL - De casus FARC : een cyclus naar vrede?

    NARCIS (Netherlands)

    Logtens, T.W.A.; Huijsman, W.P.; Schrijver, P.

    2016-01-01

    De diversiteit aan methoden en middelen waarover een commandant beschikt is de afgelopen jaren sterk toegenomen. Om deze middelen effectief in te kunnen zetten moet hij zoveel mogelijk inzicht hebben in alle factoren en actoren van invloed, waarvoor de werkmethode Intelligence Preparation of the

  10. Dynamic building simulation model in the early design phase; Dynamisch simulatiemodel in het vroege ontwerpstadium

    Energy Technology Data Exchange (ETDEWEB)

    Standaert, P.; Somogyi, Z. [Physibel, Maldegem (Belgium)

    2002-09-01

    It is demonstrated that a relatively complex, validated calculation model can be used successfully in the early design stage by both building design engineers and the layman. First, an outline is given of the CAPSOL calculation model, which is intended for professional design engineers. This is followed by a discussion of the CAPSOL Visual Interface, a program in which the degree of difficulty involved in using the CAPSOL model is significantly reduced. [Dutch] Dit artikel toont aan dat een relatief ingewikkeld en gevalideerd rekenmodel met succes in het vroege ontwerpstadium kan worden gebruikt door zowel bouwfysici als leken. Daartoe wordt eerst het rekenmodel CAPSOL uitgelegd. Dit model is bedoeld voor gebruik door bouwfysici. Daarna wordt de 'CAPSOL Visual Interface' toegelicht. In deze interface is de moeilijkheidsgraad om het rekenmodel CAPSOL te gebruiken in belangrijke mate gereduceerd.

  11. Space station operations management

    Science.gov (United States)

    Cannon, Kathleen V.

    1989-01-01

    Space Station Freedom operations management concepts must be responsive to the unique challenges presented by the permanently manned international laboratory. Space Station Freedom will be assembled over a three year period where the operational environment will change as significant capability plateaus are reached. First Element Launch, Man-Tended Capability, and Permanent Manned Capability, represent milestones in operational capability that is increasing toward mature operations capability. Operations management concepts are being developed to accomodate the varying operational capabilities during assembly, as well as the mature operational environment. This paper describes operations management concepts designed to accomodate the uniqueness of Space Station Freedoom, utilizing tools and processes that seek to control operations costs.

  12. HFETR operation management

    International Nuclear Information System (INIS)

    Liu Rong; Yang Shuchun; Peng Jun; Zhou Shoukang

    2003-01-01

    Experiences and work methods with High Flux Engineering Test Reactor (HFETR) operation are introduced, which have been accumulated in a long period of operation, in the aspects as reactor operation, test, maintenance, operator training and incident management. It's clear that the safety operation of HFETR has been ensured, and the methods are valid. (authors)

  13. Heat transfer operators associated with quantum operations

    International Nuclear Information System (INIS)

    Aksak, C; Turgut, S

    2011-01-01

    Any quantum operation applied on a physical system is performed as a unitary transformation on a larger extended system. If the extension used is a heat bath in thermal equilibrium, the concomitant change in the state of the bath necessarily implies a heat exchange with it. The dependence of the average heat transferred to the bath on the initial state of the system can then be found from the expectation value of a Hermitian operator, which is named as the heat transfer operator (HTO). The purpose of this paper is to investigate the relation between the HTOs and the associated quantum operations. Since any given quantum operation on a system can be realized by different baths and unitaries, many different HTOs are possible for each quantum operation. On the other hand, there are also strong restrictions on the HTOs which arise from the unitarity of the transformations. The most important of these is the Landauer erasure principle. This paper is concerned with the question of finding a complete set of restrictions on the HTOs that are associated with a given quantum operation. An answer to this question has been found only for a subset of quantum operations. For erasure operations, these characterizations are equivalent to the generalized Landauer erasure principle. For the case of generic quantum operations, however, it appears that the HTOs obey further restrictions which cannot be obtained from the entropic restrictions of the generalized Landauer erasure principle.

  14. Animal Feeding Operations

    Science.gov (United States)

    ... type=”submit” value=”Submit” /> Healthy Water Home Animal Feeding Operations Recommend on Facebook Tweet Share Compartir ... of Concentrated Animal Feeding Operations (CAFOs) What are Animal Feeding Operations (AFOs)? According to the United States ...

  15. Conduct of operations: establishing operational focus and setting operational standards

    International Nuclear Information System (INIS)

    Lane, L.; McGuigan, K.

    1998-01-01

    Due to the nature of our business, we have often tended to focus on the technological aspects of the nuclear industry. The focus of this paper is directed towards the importance of addressing the people skills, attitudes, and 'culture' within, and surrounding, our facilities as key areas of improvement. Within Ontario Hydro Nuclear (OLIN) we have developed the terminology 'event free' operation and 'event free' culture. 'Event Free' recognizes errors as a part of human performance. 'Event Free' takes into account human weaknesses, and provides tools (such as standards) to manage, control, and mitigate errors. In essence, 'Event Free' encompasses two concepts: 1. Prevent errors from occurring; 2. If an error is made, catch it before it can affect safe operation of the facility, learn from the error, and ensure that it does not happen again. In addressing these business realities, Ontario Hydro has identified a number of key support mechanisms and corresponding performance standards that are essential for achieving operating excellence and an 'event free' business culture. This paper will discuss two operational aspects of an 'event free' culture, the first being a set of expectations to enhance the culture, and the second an example of cultural change: 1. Operating Standards - establishing clear expectations for human performance in operating staff; 2. Operational Focus - the understanding that, as a nuclear worker, you should consider every task, activity, in fact everything you do in this business, for the potential to affect safe and reliable operation of a nuclear facility. Note that although the term 'Operational' appears in the title, this concept applies to every individual in the nuclear business, from the cleaner, to the Board of Directors, to the external supplier. (author)

  16. Saxton Transportation Operations Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Saxton Transportation Operations Laboratory (Saxton Laboratory) is a state-of-the-art facility for conducting transportation operations research. The laboratory...

  17. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and Emergency ...

  18. Separable quadratic stochastic operators

    International Nuclear Information System (INIS)

    Rozikov, U.A.; Nazir, S.

    2009-04-01

    We consider quadratic stochastic operators, which are separable as a product of two linear operators. Depending on properties of these linear operators we classify the set of the separable quadratic stochastic operators: first class of constant operators, second class of linear and third class of nonlinear (separable) quadratic stochastic operators. Since the properties of operators from the first and second classes are well known, we mainly study the properties of the operators of the third class. We describe some Lyapunov functions of the operators and apply them to study ω-limit sets of the trajectories generated by the operators. We also compare our results with known results of the theory of quadratic operators and give some open problems. (author)

  19. International co-operation

    International Nuclear Information System (INIS)

    1998-01-01

    In this part the are reviewed: Co-operation with IAEA; Participation of the Slovakia on the 41 st session of the General Conference; The comprehensive Nuclear-Test-Ban Treaty Organization; Co-operation with the Organization for Economic Co-operation and Development; co-operation with the European Commission; Fulfillment of obligations resulting from the international contracting documents

  20. Biomedical programs operations plans

    Science.gov (United States)

    Walbrecher, H. F.

    1974-01-01

    Operational guidelines for the space shuttle life sciences payloads are presented. An operational assessment of the medical experimental altitude test for Skylab, and Skylab life sciences documentation are discussed along with the operations posture and collection of space shuttle operational planning data.

  1. Composite operators in QCD

    International Nuclear Information System (INIS)

    Sonoda, Hidenori

    1992-01-01

    We give a formula for the derivatives of a correlation function of composite operators with respect to the parameters (i.e. the strong fine structure constant and the quark mass) of QCD in four- dimensional euclidean space. The formula is given as spatial integration of the operator conjugate to a parameter. The operator product of a composite operator and a conjugate operator has an unintegrable part, and the formula requires divergent subtractions. By imposing consistency conditions we drive a relation between the anomalous dimensions of the composite operators and the unintegrable part of the operator product coefficients. (orig.)

  2. The AECL operator companion

    International Nuclear Information System (INIS)

    Lupton, L.R.; Anderson, L.L.; Basso, R.A.J.

    1989-11-01

    As CANDU plants become more complex, and are operated under tighter constraints and for longer periods between outages, plant operations staff will have to absorb more information to correctly and rapidly respond to upsets. A development program is underway at AECL to use expert systems and interactive media tools to assist operations staff of existing and future CANDU plants. The complete system for plant information access and display, on-line advice and diagnosis, and interactive operating procedures is called the Operator Companion. A prototype, consisting of operator consoles, expert systems and simulation modules in a distributed architecture, is currently being developed to demonstrate the concepts of the Operator Companion

  3. Elementary operators on self-adjoint operators

    Science.gov (United States)

    Molnar, Lajos; Semrl, Peter

    2007-03-01

    Let H be a Hilbert space and let and be standard *-operator algebras on H. Denote by and the set of all self-adjoint operators in and , respectively. Assume that and are surjective maps such that M(AM*(B)A)=M(A)BM(A) and M*(BM(A)B)=M*(B)AM*(B) for every pair , . Then there exist an invertible bounded linear or conjugate-linear operator and a constant c[set membership, variant]{-1,1} such that M(A)=cTAT*, , and M*(B)=cT*BT, .

  4. Operation planning device

    International Nuclear Information System (INIS)

    Watanabe, Takashi; Odakawa, Naoto; Erikuchi, Makoto; Okada, Masayuki; Koizumi, Atsuhiko.

    1996-01-01

    The device of the present invention provides a device suitable for monitoring a reactor core state and operation replanning in terms of reactor operation. Namely, (1) an operation result difference judging means judges that replanning is necessary when the operation results deviates from the operation planning, (2) an operation replanning rule data base storing means stores a deviation key which shows various kinds of states where the results deviate from the planning and a rule for replanning for returning to the operation planning on every deviating key, (3) an operation replanning means forms a new operation planning in accordance with the rule which is retrieved based on the deviation key, (4) an operation planning optimizing rule data base storing means evaluates the reformed planning and stores it on every evaluation item, (5) an operation planning optimization means correct the operation planning data so as to be optimized when the evaluation of the means (4) is less than a reference value, and (6) an operation planning display means edits adaptable operation planning data and the result of the evaluation and displays them. (I.S.)

  5. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... to Choosing a Surgical Residency Education Modules Practice Management Workshops Patients and Family Patient Education Patient Education ... Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

  6. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Congress Educational Program Events and Special Activities Resources Housing and Travel Exhibitors Media Information Clinical Congress 2017 ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills ...

  7. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... 25- and 50-Year Fellows Recognition Surgical History Group Icons in Surgery Archives Catalog Additional Resources Contact ... for after the operation including review of attached equipment and ways for you to actively participate to ...

  8. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... at ACS ACS and Veterans Diversity at ACS ... and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

  9. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Surgeon Specific Registry Trauma Education Trauma Education Trauma Education Advanced Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and Emergency ...

  10. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Education Trauma Education Achieving Zero Preventable Deaths Trauma Systems Conference Advanced Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

  11. Nonlocal Operational Calculi for Dunkl Operators

    Directory of Open Access Journals (Sweden)

    Ivan H. Dimovski

    2009-03-01

    Full Text Available The one-dimensional Dunkl operator $D_k$ with a non-negative parameter $k$, is considered under an arbitrary nonlocal boundary value condition. The right inverse operator of $D_k$, satisfying this condition is studied. An operational calculus of Mikusinski type is developed. In the frames of this operational calculi an extension of the Heaviside algorithm for solution of nonlocal Cauchy boundary value problems for Dunkl functional-differential equations $P(D_ku = f$ with a given polynomial $P$ is proposed. The solution of these equations in mean-periodic functions reduces to such problems. Necessary and sufficient condition for existence of unique solution in mean-periodic functions is found.

  12. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills ...

  13. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Stay Up to Date with ACS Association Management Jobs Events Find a Surgeon Patients and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

  14. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Disaster Management and Emergency Preparedness Rural Trauma Team Development Course Trauma Evaluation and Management Trauma CME The ... for after the operation including review of attached equipment and ways for you to actively participate to ...

  15. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Up to Date with ACS Association Management JACS Jobs Events Find a Surgeon Patients and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

  16. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... ACS ACS and Veterans Diversity at ACS ... and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

  17. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Online Guide to Choosing a Surgical Residency Practice Management Workshops Patients and Family Patient Education Patient Education ... Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

  18. Improving operating room safety

    Directory of Open Access Journals (Sweden)

    Garrett Jill

    2009-11-01

    Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

  19. Computer algebra and operators

    Science.gov (United States)

    Fateman, Richard; Grossman, Robert

    1989-01-01

    The symbolic computation of operator expansions is discussed. Some of the capabilities that prove useful when performing computer algebra computations involving operators are considered. These capabilities may be broadly divided into three areas: the algebraic manipulation of expressions from the algebra generated by operators; the algebraic manipulation of the actions of the operators upon other mathematical objects; and the development of appropriate normal forms and simplification algorithms for operators and their actions. Brief descriptions are given of the computer algebra computations that arise when working with various operators and their actions.

  20. Operating System Security

    CERN Document Server

    Jaeger, Trent

    2008-01-01

    Operating systems provide the fundamental mechanisms for securing computer processing. Since the 1960s, operating systems designers have explored how to build "secure" operating systems - operating systems whose mechanisms protect the system against a motivated adversary. Recently, the importance of ensuring such security has become a mainstream issue for all operating systems. In this book, we examine past research that outlines the requirements for a secure operating system and research that implements example systems that aim for such requirements. For system designs that aimed to

  1. Operation training aid device

    International Nuclear Information System (INIS)

    Yoshimura, Sadanori.

    1994-01-01

    The device of the present invention evaluates the propriety of an operation which is conducted optionally by a trainee depending on the state of the plant, analyzes the cause of an operation error and aids the preparation of training policy and teaching materials based on the results of the evaluation and the analysis. Namely, an operation data collection device collects operation data for the plant operation conducted by the trainee and the state of the plant during the operation. Since an operation evaluation device evaluates the plant operation in a short period of time based on the evaluation criteria of an operation evaluation knowledge base, an operation error is never overlooked. Accordingly, uniform and highly reliable operation training at definite evaluation criteria can be obtained. In addition, an error-cause analyzing device and a training policy knowledge base analyze the cause of an error inherent to each of the trainee, and it is recorded systematically independently on every trainees. Since a training policy guide device retrieves and presents an operation error and a cause of the error, there can be prepared a training policy incorporating training with respect to the operation error that each of the trainee tends to commit. (I.S.)

  2. MRI for therapy control in patients with aortic isthmus stenosis; MRT zur Therapiekontrolle bei Patienten mit Aortenisthmusstenose

    Energy Technology Data Exchange (ETDEWEB)

    Wintersperger, B.J. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany); Toronto General Hospital, University of Toronto, Department of Medical Imaging, University Health Network, Toronto M5G 2N2 (Canada); Theisen, D.; Reiser, M.F. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany)

    2011-01-15

    Weiterentwicklungen der MRT-Technologie stehen neben der hochaufloesenden MR-Angiographie (MRA) zunehmend auch Techniken der funktionellen Evaluierung (wie z. B. die dynamische MRA, 4D-PC-Flussmessungen) zur Verfuegung, die u. U. auch das Risiko moeglicher Komplikationen wie z. B. von Aneurysmen voraussagen koennten. Hierzu sind jedoch weitere Studien notwendig. Dabei wird v. a. zur Therapie moeglicher Komplikationen nach einer Operation (Aneurysmen, Restenosen) die interventionelle Therapie mit Stents und Stentgrafts eingesetzt, wobei diese die Anwendung der MRT aufgrund haeufiger massiver Metallartefakte z. T. deutlich limitiert. (orig.)

  3. Safe operating envelope

    Energy Technology Data Exchange (ETDEWEB)

    Oliva, N [Ontario Hydro, Toronto, ON (Canada)

    1997-12-01

    Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs.

  4. Major operations and activities

    Energy Technology Data Exchange (ETDEWEB)

    Black, D.G.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development.

  5. Autonomous Systems and Operations

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Autonomous Systems and Operations (ASO) project will develop an understanding of the impacts of increasing communication time delays on mission operations,...

  6. Boiler operator's handbook

    CERN Document Server

    Heselton, Ken

    2004-01-01

    Containing key information for operators and managers of large and small plants, this is an indispensable guide for those at advanced and early stages of their careers, as well as for managers interested in reducing operating expenses.

  7. Joint Operation Planning

    National Research Council Canada - National Science Library

    2006-01-01

    .... It sets forth joint doctrine to govern the joint operation planning activities and performance of the Armed Forces of the United States in joint operations, and provides the joint doctrinal basis...

  8. Crew Transportation Operations Standards

    Science.gov (United States)

    Mango, Edward J.; Pearson, Don J. (Compiler)

    2013-01-01

    The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

  9. Safe operating envelope

    International Nuclear Information System (INIS)

    Oliva, N.

    1997-01-01

    Safe Operating Envelope is described representing: The outer bound of plant conditions within which day-to-day plant operation must be maintained in order to comply with regulatory requirements, associated safety design criteria and corporate nuclear safety goals. Figs

  10. Major operations and activities

    International Nuclear Information System (INIS)

    Black, D.G.

    1995-01-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development

  11. Vessel Operator System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Operator cards are required for any operator of a charter/party boat and or a commercial vessel (including carrier and processor vessels) issued a vessel permit from...

  12. Ranking Operations Management conferences

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Gupta, Sushil; Laptaned, U

    2007-01-01

    Several publications have appeared in the field of Operations Management which rank Operations Management related journals. Several ranking systems exist for journals based on , for example, perceived relevance and quality, citation, and author affiliation. Many academics also publish at conferences

  13. Computer-assisted operational planning for pediatric abdominal surgery. 3D-visualized MRI with volume rendering; Die computerassistierte Operationsplanung in der Abdominalchirurgie des Kindes. 3D-Visualisierung mittels ''volume rendering'' in der MRT

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, P.; Holland-Cunz, S.; Waag, K.L. [Universitaetsklinikum Heidelberg (Germany). Kinderchirurgie; Troeger, J. [Universitaetsklinikum Heidelberg, (Germany). Paediatrische Radiologie; Schenk, J.P. [Universitaetsklinikum Heidelberg, (Germany). Paediatrische Radiologie; Universitaetsklinikum, Paediatrische Radiologie, Heidelberg (Germany)

    2006-08-15

    Exact surgical planning is necessary for complex operations of pathological changes in anatomical structures of the pediatric abdomen. 3D visualization and computer-assisted operational planning based on CT data are being increasingly used for difficult operations in adults. To minimize radiation exposure and for better soft tissue contrast, sonography and MRI are the preferred diagnostic methods in pediatric patients. Because of manifold difficulties 3D visualization of these MRI data has not been realized so far, even though the field of embryonal malformations and tumors could benefit from this. A newly developed and modified raycasting-based powerful 3D volume rendering software (VG Studio Max 1.2) for the planning of pediatric abdominal surgery is presented. With the help of specifically developed algorithms, a useful surgical planning system is demonstrated. Thanks to the easy handling and high-quality visualization with enormous gain of information, the presented system is now an established part of routine surgical planning. (orig.) [German] Komplexe Operationen bei ausgepraegten pathologischen Veraenderungen anatomischer Strukturen des kindlichen Abdomens benoetigen eine exakte Operationsvorbereitung. 3D-Visualisierung und computerassistierte Operationsplanung anhand von CT-Daten finden fuer schwierige chirurgische Eingriffe bei Erwachsenen in zunehmendem Masse Anwendung. Aus strahlenhygienischen Gruenden und bei besserer Weichteildifferenzierung ist jedoch neben der Sonographie die Magnetresonanztomographie (MRT) bei Kindern das Diagnostikum der Wahl. Die 3D-Visualisierung dieser MRT-Daten ist dabei jedoch aufgrund vielfaeltiger Schwierigkeiten bisher nicht durchgefuehrt worden, obwohl sich das Gebiet embryonaler Fehlbildungen und Tumoren geradezu anbietet. Vorgestellt wird eine weiterentwickelte und an die Fragestellungen der abdominellen Kinderchirurgie angepasste, sehr leistungsstarke raycastingbasierte 3D-volume-rendering-Software (VG Studio Max 1

  14. Emergency operation determination system

    International Nuclear Information System (INIS)

    Miki, Tetsushi.

    1993-01-01

    The system of the present invention can determine an emergency operation coping with abnormal events occurring during nuclear plant operation without replying on an operator's judgement. That is, the system of the present invention comprises an intelligence base which divides and classifies the aims of the plant operation for the function, structure and operation manual and puts them into network. Degree of attainment for the extend of the status normality is determined on every aim of operation based on various kinds of measured data during plant operation. For a degree of attainment within a predetermined range, it is judged that an emergency operation is possible although this is in an abnormal state. Degree of emergency is determined by a fuzzy theory based on the degree of attainment, variation coefficient for the degree of attainment and the sensitivity to external disturbance as parameters. Priority for the degree of emergency on every operation aims is determined by comparison. Normality is successively checked for the determined operation aims. As a result, equipments as objects of abnormality suppressing operation are specified, and the operation amount of the equipments as objects are determined so that the measuring data are within a predetermined range. (I.S.)

  15. Mobile Operating Systems

    OpenAIRE

    Vipin Kamboj; Hitesh Gupta

    2012-01-01

    Mobile phones are used by every people in today’s life. We use mobile phones without knowing the different factors that a mobile used including its technology, operating system, CPU ,RAM etc. Many types of operating system are used by different mobile. Every operating system has their advantage

  16. Status of TRISTAN operation

    International Nuclear Information System (INIS)

    Satoh, Kotaro

    1990-01-01

    The present status of the TRISTAN operation is summarized mainly after the installation of superconducting cavities in the 1988 summer shutdown. The paper describes the initial experience of the superconducting cavity operation, the colliding operation at 30.4 GeV and the beam injection. Future improvement is also reported. (author)

  17. Operations and maintenance philosophy

    International Nuclear Information System (INIS)

    DUNCAN, G.P.

    1999-01-01

    This Operations and Maintenance (O and M) Philosophy document is intended to establish a future O and M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O and M lessons learned into on-going and future project upgrades

  18. On the operator equivalents

    International Nuclear Information System (INIS)

    Grenet, G.; Kibler, M.

    1978-06-01

    A closed polynomial formula for the qth component of the diagonal operator equivalent of order k is derived in terms of angular momentum operators. The interest in various fields of molecular and solid state physics of using such a formula in connection with symmetry adapted operator equivalents is outlined

  19. Lageos assembly operation plan

    Science.gov (United States)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  20. Operational Intelligence and Operational Design: Thinking about Operational Art

    Science.gov (United States)

    2011-06-01

    captured it best when he wrote, ―Operational intelligence is more or less the fusion of 45 Kent... Market Garden….‖34 Additionally, Drea concluded that the strong-minded General Douglas MacArthur‘s ―sense of destiny‖ shaped his strategic concepts...1960. Memorandum RM-4172-ISA, Santa Monica, CA: The RAND Corporation, September 1964. The Bible . New International Version. Hitchcock, Walter T., ed

  1. Operational symmetries basic operations in physics

    CERN Document Server

    Saller, Heinrich

    2017-01-01

    This book describes the endeavour to relate the particle spectrum with representations of operational electroweak spacetime, in analogy to the atomic spectrum as characterizing representations of hyperbolic space. The spectrum of hyperbolic position space explains the properties of the nonrelativistic atoms; the spectrum of electroweak spacetime is hoped to explain those of the basic interactions and elementary particles. In this book, the theory of operational symmetries is developed from the numbers, from Plato’s and Kepler’s symmetries over the simple Lie groups to their applications in nonrelativistic, special relativistic and general relativistic quantum theories with the atomic spectrum for hyperbolic position and, in first attempts, the particle spectrum for electroweak spacetime. The standard model of elementary particles and interactions is characterized by a symmetry group. In general, as initiated by Weyl and stressed by Heisenberg, quantum theory can be built as a theory of operation groups an...

  2. Shuttle operations era planning for flight operations

    Science.gov (United States)

    Holt, J. D.; Beckman, D. A.

    1984-01-01

    The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

  3. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1993-01-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes

  4. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ... facs.org Copyright © 1996-2018 by the American College of Surgeons, Chicago, IL 60611-3295 | Privacy Policy | Terms of Use

  5. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Use Patient Opioid Use Position Statements and Task Force Patient Education Initiatives Advocacy and Health Policy Updates Selected Research ... at ACS ACS and Veterans Diversity at ACS ... and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

  6. Operations management system

    Science.gov (United States)

    Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

    1990-01-01

    The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

  7. Cask fleet operations study

    International Nuclear Information System (INIS)

    1988-01-01

    The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system

  8. Entanglement branching operator

    Science.gov (United States)

    Harada, Kenji

    2018-01-01

    We introduce an entanglement branching operator to split a composite entanglement flow in a tensor network which is a promising theoretical tool for many-body systems. We can optimize an entanglement branching operator by solving a minimization problem based on squeezing operators. The entanglement branching is a new useful operation to manipulate a tensor network. For example, finding a particular entanglement structure by an entanglement branching operator, we can improve a higher-order tensor renormalization group method to catch a proper renormalization flow in a tensor network space. This new method yields a new type of tensor network states. The second example is a many-body decomposition of a tensor by using an entanglement branching operator. We can use it for a perfect disentangling among tensors. Applying a many-body decomposition recursively, we conceptually derive projected entangled pair states from quantum states that satisfy the area law of entanglement entropy.

  9. Management of Port Operations

    OpenAIRE

    Gheorghe BASANU; Georgiana NUKINA

    2011-01-01

    The Management of port operation requires the proper and efficient use of port facility, equipment for cargo handling, berth facilities, waterways and roads. It also entails the use of effective communications system, storage facilities, and dockworkers. The whole activities mentioned above form the bulk of port operations. The aspiration of port operator is to get cargo through the gateway of ports as fast as possible on to other modes of transport (rail or road) with a minimal cost to them ...

  10. Purge ventilation operability

    International Nuclear Information System (INIS)

    Marella, J.R.

    1995-01-01

    A determination of minimum requirements for purge exhaust ventilation system operability has been performed. HLWE and HLW Regulatory Program personnel have evaluated the various scenarios of equipment conditions and HLWE has developed the requirements for purge exhaust systems. This report is provided to document operability requirements to assist Tank Farm personnel to determine whether a system is operable/inoperable and to define required compensatory actions

  11. Operation Chromite: Amphibious Planning

    OpenAIRE

    2005-01-01

    tut present Tutorial Presentation Interactive Media Element This interactive tutorial covers the Inchon landing case study that provides several good examples of the types of decisions made during the amphibious planning process, and how they compare to the current matrix of the ten primary decisions for amphibious operation required today by joint doctrine. Operation Chromite is used as an example. 8808A Warfighting from the Sea: Amphibious Operations

  12. Network operating system

    Science.gov (United States)

    1985-01-01

    Long-term and short-term objectives for the development of a network operating system for the Space Station are stated. The short-term objective is to develop a prototype network operating system for a 100 megabit/second fiber optic data bus. The long-term objective is to establish guidelines for writing a detailed specification for a Space Station network operating system. Major milestones are noted. Information is given in outline form.

  13. ISACC in Operations

    Science.gov (United States)

    2014-06-01

    19th floor of a Hotel to overlook the entire event. Page 12 of 17 Figure 6: The SPF Operations Centre overlooking the Event Lessons...have a cheap system to help them solve their immediate operational needs. b. Medium enterprises, that need to have quick customization of the...Optimize” tools to help them advance their current operations to a higher service satisfaction level seen by the public. 32. Common across all

  14. Strategic Psychological Operations management

    OpenAIRE

    Sokoloski, Joseph A.

    2005-01-01

    United States Military Psychological Operations are engaged in a type of mass marketing of ideas. To accomplish this The United States Army Civil Affairs and Psychological Operations Command (USACAPOC) employs active and reserve PSYOP units to conduct PSYOP campaigns. However the methodology used to manage these campaigns often hinders the effective employment of timely and effective Psychological Operations. PSYOP has a difficult job to accomplish but PSYOP does not have the proper managemen...

  15. Licensed operating reactors

    International Nuclear Information System (INIS)

    1989-11-01

    The US Nuclear Regulatory Commission's monthly Licensed Operating Reactors Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units is provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the errata page

  16. Miscellaneous Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes miscellaneous industrial minerals operations in the United States. The data represent commodities covered by the Minerals Information Team...

  17. Operational Law Handbook,2007

    National Research Council Canada - National Science Library

    2007-01-01

    ...), human rights, rules of engagement, emergency essential civilians supporting military operations, contingency contractor personnel, foreign and deployment, criminal law, environmental law, fiscal law...

  18. Enhancing operational safety

    Energy Technology Data Exchange (ETDEWEB)

    Wiebe, J S

    1997-09-01

    The presentation briefly considers the following aspects concerning enhancing operational safety of NPP: licensed control room supervision, reactivity changes, personnel access to control room, simulator training.

  19. Operational safety reliability research

    International Nuclear Information System (INIS)

    Hall, R.E.; Boccio, J.L.

    1986-01-01

    Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant

  20. Operational Modal Analysis Tutorial

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle

    of modal parameters of practical interest - including the mode shape scaling factor - with a high degree of accuracy. It is also argued that the operational technology offers the user a number of advantages over traditional modal testing. The operational modal technology allows the user to perform a modal......In this paper the basic principles in operational modal testing and analysis are presented and discussed. A brief review of the techniques for operational modal testing and identification is presented, and it is argued, that there is now a wide range of techniques for effective identification...

  1. Licensed operating reactors

    International Nuclear Information System (INIS)

    1990-04-01

    The Operating Units Status Report --- Licensed Operating Reactors provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management from the Headquarters staff on NRC's Office of Enforcement (OE), from NRC's Regional Offices, and from utilities. The three sections of the report are: monthly highlights and statistics for commercial operating units, and errata from previously reported data; a compilation of detailed information on each unit, provided by NRC's Regional Offices, OE Headquarters and the utilities; and an appendix for miscellaneous information such as spent fuel storage capability, reactor-years of experience and non- power reactors in the US

  2. International co-operation

    International Nuclear Information System (INIS)

    Klinda, J.; Lieskovska, Z.

    1998-01-01

    Within the Union Nations (UN) framework, the Slovak Republic participated in following activities on environment protection co-operation: UN European Economic Commission, UN Industrial Development Organization, UN Development Programme, UN Human Habitat Organization, UN Environment Programme, and UN Commission on Sustainable Development. Relevant activities of the Slovak Republic in these co-operations as well as in European Union and OECD activities are reviewed. International conventions and other forms of multilateral co-operation, bilateral co-operation, and international programmes and projects in which the Slovak Republic took participate are presented

  3. Operator interface for vehicles

    Science.gov (United States)

    Bissontz, Jay E

    2015-03-10

    A control interface for drivetrain braking provided by a regenerative brake and a non-regenerative brake is implemented using a combination of switches and graphic interface elements. The control interface comprises a control system for allocating drivetrain braking effort between the regenerative brake and the non-regenerative brake, a first operator actuated control for enabling operation of the drivetrain braking, and a second operator actuated control for selecting a target braking effort for drivetrain braking. A graphic display displays to an operator the selected target braking effort and can be used to further display actual braking effort achieved by drivetrain braking.

  4. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1987-05-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes

  5. Gyroaveraging operations using adaptive matrix operators

    Science.gov (United States)

    Dominski, Julien; Ku, Seung-Hoe; Chang, Choong-Seock

    2018-05-01

    A new adaptive scheme to be used in particle-in-cell codes for carrying out gyroaveraging operations with matrices is presented. This new scheme uses an intermediate velocity grid whose resolution is adapted to the local thermal Larmor radius. The charge density is computed by projecting marker weights in a field-line following manner while preserving the adiabatic magnetic moment μ. These choices permit to improve the accuracy of the gyroaveraging operations performed with matrices even when strong spatial variation of temperature and magnetic field is present. Accuracy of the scheme in different geometries from simple 2D slab geometry to realistic 3D toroidal equilibrium has been studied. A successful implementation in the gyrokinetic code XGC is presented in the delta-f limit.

  6. Operational Transformation In Co-Operative Editing

    Directory of Open Access Journals (Sweden)

    Mandeep Kaur

    2015-08-01

    Full Text Available Cooperative Editing Systems in real-time allows a virtual team to view and edit a shared document at the same time. The document shared must be synchronized in order to ensure consistency for all the participants. This paper describes the Operational Transformation the evolution of its techniques its various applications major issues and achievements. In addition this paper will present working of a platform where two users can edit a code programming file at the same time.

  7. Operator interface programs for KSTAR operation

    International Nuclear Information System (INIS)

    Lee, Sangil; Park, Mikyung; Park, Jinseop; Na, Hoonkyun; Kwon, M.

    2013-01-01

    Beginning the first plasma discharging experiment of KSTAR since 2008, KSTAR performed the third plasma discharging experiment by 2010. During the experiment of three times, KSTAR OPerator Interface (OPI) programs have been developed for KSTAR operation by itself. OPI programs used in KSTAR were implemented by KSTAR widget plug-in Toolkit (KWT). The KWT means the plug-in library implemented by Qt-based user interface development software. The main purpose of developing the KWT library is to implement full automation libraries having interface with the automated EPICS channel access (CA) guaranteeing the flexibility for requirements of operators. In addition, it has advantages in minimizing human code error and maximizing utilization of the limited human resource. According to the increasing of control systems, a number of OPI servers connected to one EPICS gateway server caused the connection problem and increased the amount of the network data packets. To solve these problems, an algorithm of “CachedChannelAccess” for shared memory base was implemented into an inner logic of the KWT library. KSTAR control system monitoring (CSM) program is one of applications developed by using KWT library. The function of CSM program is to notify alarm to operators by checking health status of every server's network health status and resource (cpu, memory, network packets, disk usage rate and system/user defined process) usage state. Another application is a post-shot sequencing program which is activated after every shot is completed. This application is to display major plasma parameters and diagnostic data in chart form, to save this data to database, and to transfer a chart image file to a web server. This paper describes the technical details how to develop OPI applications which have high productivity using Qt on the EPICS-based control system

  8. Operator interface programs for KSTAR operation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sangil, E-mail: leesi@nfri.re.kr; Park, Mikyung, E-mail: mkpark@nfri.re.kr; Park, Jinseop, E-mail: linupark@nfri.re.kr; Na, Hoonkyun, E-mail: hkna@nfri.re.kr; Kwon, M., E-mail: kwonm@nfri.re.kr

    2013-11-15

    Beginning the first plasma discharging experiment of KSTAR since 2008, KSTAR performed the third plasma discharging experiment by 2010. During the experiment of three times, KSTAR OPerator Interface (OPI) programs have been developed for KSTAR operation by itself. OPI programs used in KSTAR were implemented by KSTAR widget plug-in Toolkit (KWT). The KWT means the plug-in library implemented by Qt-based user interface development software. The main purpose of developing the KWT library is to implement full automation libraries having interface with the automated EPICS channel access (CA) guaranteeing the flexibility for requirements of operators. In addition, it has advantages in minimizing human code error and maximizing utilization of the limited human resource. According to the increasing of control systems, a number of OPI servers connected to one EPICS gateway server caused the connection problem and increased the amount of the network data packets. To solve these problems, an algorithm of “CachedChannelAccess” for shared memory base was implemented into an inner logic of the KWT library. KSTAR control system monitoring (CSM) program is one of applications developed by using KWT library. The function of CSM program is to notify alarm to operators by checking health status of every server's network health status and resource (cpu, memory, network packets, disk usage rate and system/user defined process) usage state. Another application is a post-shot sequencing program which is activated after every shot is completed. This application is to display major plasma parameters and diagnostic data in chart form, to save this data to database, and to transfer a chart image file to a web server. This paper describes the technical details how to develop OPI applications which have high productivity using Qt on the EPICS-based control system.

  9. Crane and Excavator Operator.

    Science.gov (United States)

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on crane and excavator operation is designed to enable the crane and excavator operator to perform his/her duties more proficiently. Introductory materials include specific information for MCI students, a course introduction, and a study guide…

  10. Science Operations Management

    Science.gov (United States)

    Squibb, Gael F.

    1984-10-01

    The operation teams for the Infrared Astronomical Satellite (IRAS) included scientists from the IRAS International Science Team. The scientific decisions on an hour-to-hour basis, as well as the long-term strategic decisions, were made by science team members. The IRAS scientists were involved in the analysis of the instrument performance, the analysis of the quality of the data, the decision to reacquire data that was contaminated by radiation effects, the strategy for acquiring the survey data, and the process for using the telescope for additional observations, as well as the processing decisions required to ensure the publication of the final scientific products by end of flight operations plus one year. Early in the project, two science team members were selected to be responsible for the scientific operational decisions. One, located at the operations control center in England, was responsible for the scientific aspects of the satellite operations; the other, located at the scientific processing center in Pasadena, was responsible for the scientific aspects of the processing. These science team members were then responsible for approving the design and test of the tools to support their responsibilities and then, after launch, for using these tools in making their decisions. The ability of the project to generate the final science data products one year after the end of flight operations is due in a large measure to the active participation of the science team members in the operations. This paper presents a summary of the operational experiences gained from this scientific involvement.

  11. Health care operations management

    NARCIS (Netherlands)

    Carter, M.W.; Hans, Elias W.; Kolisch, R.

    2012-01-01

    Health care operations management has become a major topic for health care service providers and society. Operations research already has and further will make considerable contributions for the effective and efficient delivery of health care services. This special issue collects seven carefully

  12. Joint Newspaper Operating Agreements.

    Science.gov (United States)

    Parsons, Marie

    The number of competing daily newspapers in American cities has dwindled until only about 50 cities boast two papers. Of the newspapers in those cities, 23 now maintain separate editorial operations but have joint printing, advertising, and circulation departments. The concept of joint operation is 50 years old, dating from the Depression years…

  13. Special Operation. Module 20.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special operations, one in a series dealing with industrial sewing machines, their attachments, and operation, covers two topics: topstitching and mitering. For each topic these components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and a check-out…

  14. NCEP Central Operations

    Science.gov (United States)

    ) NCO Organizational Chart NOAA's Weather and Climate Operational Supercomputing System is known as Climate Climate Prediction Climate Archives Weather Safety Storm Ready NOAA Central Library Photo Library NCO's MISSION * Execute the NCEP operational model suite - Create climate, weather, ocean, space and

  15. Reliance Cell Operator

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Reliance Cell Operator. Reliance was the only bidder for cellular licences for Assam and NE. Services allowed only in Guwahati and Shillong due to “security reasons”. Only major cities in the country with only one operator.

  16. Characteristics of operating pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Gallyamov, A K; Armenskii, E A; Gimaev, R G; Mastobaev, B N; Shammazov, A M

    1977-04-01

    The interval in pressure changes according to operational data for the Kamennyi Log--Perm oil pipeline was determined with the aid of the pattern identification method. This has made it possible to determine pressure changes in the operational process. 2 references, 1 table.

  17. CANDU operating experience

    International Nuclear Information System (INIS)

    McConnell, L.G.; Woodhead, L.W.; Fanjoy, G.R.

    1982-03-01

    The CANDU Pressurized Heavy Water (CANDU-PHW) type of nuclear electric generating station has been developed jointly by Atomic Energy of Canada Limited and Ontario Hydro. This paper highlights Ontario Hydro's operating experience using the CANDU-PHW system, with a focus on the operating performance and costs, reliability of system components and nuclear safety considerations both to the workers and the public

  18. Basic Sewage Treatment Operation.

    Science.gov (United States)

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to introduce operators to the fundamentals of sewage plant operation. The course consists of lecture-discussions and hands-on activities. Each of the lessons has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in…

  19. Operating room manager game

    NARCIS (Netherlands)

    Hans, Elias W.; Nieberg, T.

    2007-01-01

    The operating room (OR) department of a hospital forms the heart of the organization, where the single largest cost is incurred. This document presents and reports on the “Operating Room Manager Game,” developed to give insight into managing a large hospital's OR department at various levels of

  20. Operation auxiliary system (SAO)

    International Nuclear Information System (INIS)

    Lolich, J.; Santome, D.; Drexler, J.

    1990-01-01

    This work presents an auxiliary system for nuclear power plants operation (SAO). The development purpose consisted in a computing supervision system to be installed at different sites of a reactor, mainly in the control room. The inclusion of this system to a nuclear power plant minimizes the possibility of human error for the facility operation. (Author) [es

  1. operation zitadelle (kursk)

    African Journals Online (AJOL)

    Administrator

    placed in terms of the levels of war, according to contemporary doctrine. .... operations and for the administration of such operations for extended periods. ... view is supported by a recent publication by Vego, professor in Military History at .... with short-term and contingency planning in which the tasks that are executed are.

  2. Advanced Tele-operation

    International Nuclear Information System (INIS)

    Decreton, M.

    1998-01-01

    Maintenance, repair, and dismantling operations in nuclear facilities have to be performed remotely when high radiation doses exclude hands-on operation, but also to minimize contamination risks and occupational doses to the operators. Computer-aided and sensor-based tele-operation enhances safety, reliability, and performance by helping the operator in difficult tasks with poor remote environmental perception. The objectives of work in this domain are to increase the scientific knowledge of the studied phenomena, to improve the interpretation of data, to improve the piloting og experimental devices during irradiation, to reveal and to understand possible unexpected phenomena occurring during irradiation. This scientific report describes the achievements for 1997 in the area of radiation tolerance for of remote-sensing, optical fibres and optical fibre sensors

  3. Operations Between Functions

    DEFF Research Database (Denmark)

    Gardner, Richard J.; Kiderlen, Markus

    A structural theory of operations between real-valued (or extended-real-valued) functions on a nonempty subset A of Rn is initiated. It is shown, for example, that any operation ∗ on a cone of functions containing the constant functions, which is pointwise, positively homogeneous, monotonic......, and associative, must be one of 40 explicitly given types. In particular, this is the case for operations between pairs of arbitrary, or continuous, or differentiable functions. The term pointwise means that (f ∗g)(x) = F(f(x), g(x)), for all x ∈ A and some function F of two variables. Several results in the same...... spirit are obtained for operations between convex functions or between support functions. For example, it is shown that ordinary addition is the unique pointwise operation between convex functions satisfying the identity property, i.e., f ∗ 0 = 0 ∗ f = f, for all convex f, while other results classify Lp...

  4. Aircraft operations management manual

    Science.gov (United States)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  5. Sustainable Building Operation

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2009-01-01

    of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

  6. Noncommutative operational calculus

    Directory of Open Access Journals (Sweden)

    Henry E. Heatherly

    1999-12-01

    Full Text Available Oliver Heaviside's operational calculus was placed on a rigorous mathematical basis by Jan Mikusinski, who constructed an algebraic setting for the operational methods. In this paper, we generalize Mikusi'{n}ski's methods to solve linear ordinary differential equations in which the unknown is a matrix- or linear operator-valued function. Because these functions can be zero-divisors and do not necessarily commute, Mikusi'{n}ski's one-dimensional calculus cannot be used. The noncommuative operational calculus developed here,however, is used to solve a wide class of such equations. In addition, we provide new proofs of existence and uniqueness theorems for certain matrix- and operator valued Volterra integral and integro-differential equations. Several examples are given which demonstrate these new methods.

  7. Assessing Operational Situations

    DEFF Research Database (Denmark)

    Zhang, Xinxin

    In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

  8. Modern operating systems

    CERN Document Server

    Tanenbaum, Andrew S

    2015-01-01

    Modern Operating Systems, Fourth Edition, is intended for introductory courses in Operating Systems in Computer Science, Computer Engineering, and Electrical Engineering programs. It also serves as a useful reference for OS professionals ' The widely anticipated revision of this worldwide best-seller incorporates the latest developments in operating systems (OS) technologies. The Fourth Edition includes up-to-date materials on relevant'OS. Tanenbaum also provides information on current research based on his experience as an operating systems researcher. ' Modern Operating Systems, Third Editionwas the recipient of the 2010 McGuffey Longevity Award. The McGuffey Longevity Award recognizes textbooks whose excellence has been demonstrated over time.'http://taaonline.net/index.html " Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: ' *Provide Practical Detail on the Big Picture Concepts: A clear and entertaining writing s...

  9. Integrated formal operations plan

    Energy Technology Data Exchange (ETDEWEB)

    Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

    1994-01-05

    The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

  10. Basic operator theory

    CERN Document Server

    Gohberg, Israel

    2001-01-01

    rii application of linear operators on a Hilbert space. We begin with a chapter on the geometry of Hilbert space and then proceed to the spectral theory of compact self adjoint operators; operational calculus is next presented as a nat­ ural outgrowth of the spectral theory. The second part of the text concentrates on Banach spaces and linear operators acting on these spaces. It includes, for example, the three 'basic principles of linear analysis and the Riesz­ Fredholm theory of compact operators. Both parts contain plenty of applications. All chapters deal exclusively with linear problems, except for the last chapter which is an introduction to the theory of nonlinear operators. In addition to the standard topics in functional anal­ ysis, we have presented relatively recent results which appear, for example, in Chapter VII. In general, in writ­ ing this book, the authors were strongly influenced by re­ cent developments in operator theory which affected the choice of topics, proofs and exercises. One ...

  11. Computerized operator decision aids

    International Nuclear Information System (INIS)

    Long, A.B.

    1984-01-01

    This article explores the potential benefits associated with the use of computers in nuclear plants by the operating crew as an aid in making decisions. Pertinent findings are presented from recently completed projects to establish the context in which operating decisions have to be made. Key factors influencing the decision-making process itself are also identified. Safety parameter display systems, which are being implemented in various forms by the nuclear industry, are described within the context of decision making. In addition, relevant worldwide research and development activities are examined as potential enhancements to computerized operator decision aids to further improve plant safety and availability

  12. Operational proof of automation

    International Nuclear Information System (INIS)

    Jaerschky, R.; Reifenhaeuser, R.; Schlicht, K.

    1976-01-01

    Automation of the power plant process may imply quite a number of problems. The automation of dynamic operations requires complicated programmes often interfering in several branched areas. This reduces clarity for the operating and maintenance staff, whilst increasing the possibilities of errors. The synthesis and the organization of standardized equipment have proved very successful. The possibilities offered by this kind of automation for improving the operation of power plants will only sufficiently and correctly be turned to profit, however, if the application of these technics of equipment is further improved and if its volume is tallied with a definite etc. (orig.) [de

  13. Tevatron operational experiences

    International Nuclear Information System (INIS)

    Norris, B.L.; Theilacker, J.C.

    1989-02-01

    Fermilabs superconducting accelerator, the Tevatron has been operational for nearly six years. The history of its operation is presented. Several long shutdowns for superconducting dipole repairs are discussed. The dominant factor influencing the repair was conductor motion which fatigued the cable in the magnet ends. Borescoping and x-raying techniques were used to determine which magnet ends required repair. Detailed downtime logs were kept for each of the running periods. A discussion of the sources of downtime and a comparison for different operating modes is presented

  14. Computer system operation

    International Nuclear Information System (INIS)

    Lee, Young Jae; Lee, Hae Cho; Lee, Ho Yeun; Kim, Young Taek; Lee, Sung Kyu; Park, Jeong Suk; Nam, Ji Wha; Kim, Soon Kon; Yang, Sung Un; Sohn, Jae Min; Moon, Soon Sung; Park, Bong Sik; Lee, Byung Heon; Park, Sun Hee; Kim, Jin Hee; Hwang, Hyeoi Sun; Lee, Hee Ja; Hwang, In A.

    1993-12-01

    The report described the operation and the trouble shooting of main computer and KAERINet. The results of the project are as follows; 1. The operation and trouble shooting of the main computer system. (Cyber 170-875, Cyber 960-31, VAX 6320, VAX 11/780). 2. The operation and trouble shooting of the KAERINet. (PC to host connection, host to host connection, file transfer, electronic-mail, X.25, CATV etc.). 3. The development of applications -Electronic Document Approval and Delivery System, Installation the ORACLE Utility Program. 22 tabs., 12 figs. (Author) .new

  15. CANDU operating experience

    International Nuclear Information System (INIS)

    McConnell, L.G.; Woodhead, L.W.; Fanjoy, G.R.; Thurygill, E.W.

    1980-05-01

    The CANDU-PHW program is based upon 38 years of heavy water reactor experience with 35 years of operating experience. Canada has had 72 reactor years of nuclear-electric operations experience with 10 nuclear units in 4 generating stations during a period of 18 years. All objectives have been met with outstanding performance: worker safety, public safety, environmental emissions, reliable electricity production, and low electricity cost. The achievement has been realized through total teamwork involving all scientific disciplines and all project functions (research, design, manufacturing, construction, and operation). (auth)

  16. Computer system operation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Jae; Lee, Hae Cho; Lee, Ho Yeun; Kim, Young Taek; Lee, Sung Kyu; Park, Jeong Suk; Nam, Ji Wha; Kim, Soon Kon; Yang, Sung Un; Sohn, Jae Min; Moon, Soon Sung; Park, Bong Sik; Lee, Byung Heon; Park, Sun Hee; Kim, Jin Hee; Hwang, Hyeoi Sun; Lee, Hee Ja; Hwang, In A [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-12-01

    The report described the operation and the trouble shooting of main computer and KAERINet. The results of the project are as follows; 1. The operation and trouble shooting of the main computer system. (Cyber 170-875, Cyber 960-31, VAX 6320, VAX 11/780). 2. The operation and trouble shooting of the KAERINet. (PC to host connection, host to host connection, file transfer, electronic-mail, X.25, CATV etc.). 3. The development of applications -Electronic Document Approval and Delivery System, Installation the ORACLE Utility Program. 22 tabs., 12 figs. (Author) .new.

  17. Inter-operability

    International Nuclear Information System (INIS)

    Plaziat, J.F.; Moulin, P.; Van Beurden, R.; Ballet, E.

    2005-01-01

    Building an internal gas market implies establishing harmonized rules for cross border trading between operators. To that effect, the European association EASEE-gas is carrying out standards and procedures, commonly called 'inter-operability'. Set up in 2002, the Association brings together all segments of the gas industry: producers, transporters, distributors, traders and shippers, suppliers, consumers and service providers. This workshop presents the latest status on issues such as barriers to gas trade in Europe, rules and procedures under preparation by EASEE-gas, and the implementation schedule of these rules by operators. This article gathers 5 presentations about this topic given at the gas conference

  18. Operator spin foam models

    International Nuclear Information System (INIS)

    Bahr, Benjamin; Hellmann, Frank; Kaminski, Wojciech; Kisielowski, Marcin; Lewandowski, Jerzy

    2011-01-01

    The goal of this paper is to introduce a systematic approach to spin foams. We define operator spin foams, that is foams labelled by group representations and operators, as our main tool. A set of moves we define in the set of the operator spin foams (among other operations) allows us to split the faces and the edges of the foams. We assign to each operator spin foam a contracted operator, by using the contractions at the vertices and suitably adjusted face amplitudes. The emergence of the face amplitudes is the consequence of assuming the invariance of the contracted operator with respect to the moves. Next, we define spin foam models and consider the class of models assumed to be symmetric with respect to the moves we have introduced, and assuming their partition functions (state sums) are defined by the contracted operators. Briefly speaking, those operator spin foam models are invariant with respect to the cellular decomposition, and are sensitive only to the topology and colouring of the foam. Imposing an extra symmetry leads to a family we call natural operator spin foam models. This symmetry, combined with assumed invariance with respect to the edge splitting move, determines a complete characterization of a general natural model. It can be obtained by applying arbitrary (quantum) constraints on an arbitrary BF spin foam model. In particular, imposing suitable constraints on a spin(4) BF spin foam model is exactly the way we tend to view 4D quantum gravity, starting with the BC model and continuing with the Engle-Pereira-Rovelli-Livine (EPRL) or Freidel-Krasnov (FK) models. That makes our framework directly applicable to those models. Specifically, our operator spin foam framework can be translated into the language of spin foams and partition functions. Among our natural spin foam models there are the BF spin foam model, the BC model, and a model corresponding to the EPRL intertwiners. Our operator spin foam framework can also be used for more general spin

  19. Major Naval Operations

    Science.gov (United States)

    2008-09-01

    operation were to take Turkey out of the war, open a direct link with the Entente’s embattled ally in Russia, force the Germans to shift troops from the...ing craft, while four combat craft (two tor- pedo craft and two light patrol craft) were captured in Port of Adabia. 5. Hartmut Zehrer, ed., Der...mission as a whole is accomplished. At the operational level, the intent is an expression of the commander’s operational vision. It provides a link

  20. Operation statistics of KEKB

    International Nuclear Information System (INIS)

    Kawasumi, Takeshi; Funakoshi, Yoshihiro

    2008-01-01

    KEKB accelerator has been operated since December 1998. We achieved the design peak luminosity of 10.00/nb/s. The present record is 17.12/nb/s. Detailed data of the KEKB Operation is important to evaluate the KEKB performance and to suggest the direction of the performance enhancement. We have classified all KEKB machine time into the following seven categories (1) Physics Run (2) Machine Study (3) Machine Tuning (4) Beam Tuning (5) Trouble (6) Maintenance (7) Others, to estimate the accelerator availability. In this paper we report the operation statistics of the KEKB accelerator. (author)

  1. Operational proof of automation

    International Nuclear Information System (INIS)

    Jaerschky, R.; Schlicht, K.

    1977-01-01

    Automation of the power plant process may imply quite a number of problems. The automation of dynamic operations requires complicated programmes often interfering in several branched areas. This reduces clarity for the operating and maintenance staff, whilst increasing the possibilities of errors. The synthesis and the organization of standardized equipment have proved very successful. The possibilities offered by this kind of automation for improving the operation of power plants will only sufficiently and correctly be turned to profit, however, if the application of these equipment techniques is further improved and if it stands in a certain ratio with a definite efficiency. (orig.) [de

  2. Licensed operating reactors

    International Nuclear Information System (INIS)

    1991-08-01

    The Nuclear Regulatory Commission's annual summary of licensed nuclear power reactor data is based primarily on the report of operating data submitted by licensees for each unit for the month of December because that report contains data for the month of December, the year to date (in this case calendar 1990) and cumulative data, usually from the date of commercial operation. The data is not independently verified, but various computer checks are made. The report is divided into two sections. The first contains summary highlights and the second contains data on each individual unit in commercial operation. Section 1 capacity and availability factors are simple arithmetic averages. Section 2 items in the cumulative column are generally as reported by the licensee and notes as to the use of weighted averages and starting dates other than commercial operation are provided

  3. Licensed operating reactors

    International Nuclear Information System (INIS)

    Hartfield, R.A.

    1994-03-01

    The Nuclear Regulatory Commissions annual summary of licensed nuclear power reactor data is based primarily on the report of operating data submitted by licensees for each unit for the month of December, the year to date (in this case calendar year 1993) and cumulative data, usually for the date of commercial operation. The data is not independently verified, but various computer checks are made. The report is divided into two sections. The first contains summary highlights and the second contains data on each individual unit in commercial operation. Section 1 capacity and availability factors are simple arithmetic averages. Section 2 items in the cumulative column are generally as reported by the licensee and notes as to the use of weighted averages and starting dates other than commercial operation are provided

  4. Nevada Operations overview

    International Nuclear Information System (INIS)

    Church, B.W.

    1981-01-01

    A brief overview is given of weapon test site decontamination activities carried out by Nevada Operations Office. Tabulated data is given of event name, date, location, year of cleanup, and radioisotopes that were present, activity levels, and cost of cleanup

  5. Licensed operating reactors

    International Nuclear Information System (INIS)

    1989-08-01

    THE OPERATING UNITS STATUS REPORT - LICENSED OPERATING REACTORS provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management from the Headquarters staff of NRC's Office of Enforcement (OE), from NRC's Regional Offices, and from utilities. The three sections of the report are: monthly highlights and statistics for commercial operating units, and errata from previously reported data; a compilation of detailed information on each unit, provided by NRC's Regional Offices, OE Headquarters and the utilities; and an appendix for miscellaneous information such as spent fuel storage capability, reactor-years of experience and non-power reactors in the US

  6. Crushed Stone Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes crushed stone operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  7. Construction Minerals Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes construction minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  8. Agricultural Minerals Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes agricultural minerals operations in the United States. The data represent commodities covered by the Minerals Information Team (MIT) of the...

  9. Sand and Gravel Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  10. Operating plan FY 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    This document is the first edition of Argonne`s new Operating Plan. The Operating Plan complements the strategic planning in the Laboratory`s Institutional Plan by focusing on activities that are being pursued in the immediate fiscal year, FY 1998. It reflects planning that has been done to date, and it will serve in the future as a resource and a benchmark for understanding the Laboratory`s performance. The heart of the Institutional Plan is the set of major research initiatives that the Laboratory is proposing to implement in future years. In contrast, this Operating Plan focuses on Argonne`s ongoing R&D programs, along with cost-saving measures and other improvements being implemented in Laboratory support operations.

  11. MITS machine operations

    International Nuclear Information System (INIS)

    Flinchem, J.

    1980-01-01

    This document contains procedures which apply to operations performed on individual P-1c machines in the Machine Interface Test System (MITS) at AiResearch Manufacturing Company's Torrance, California Facility

  12. Operating experience feedback

    International Nuclear Information System (INIS)

    Cimesa, S.

    2007-01-01

    Slovenian Nuclear Safety Administration (SNSA) has developed its own system for tracking, screening and evaluating the operating experiences of the nuclear installations. The SNSA staff regularly tracks the operating experiences throughout the world and screens them on the bases of applicability for the Slovenian nuclear facilities. The operating experiences, which pass the screening, are thoroughly evaluated and also recent operational events in these facilities are taken into account. If needed, more information is gathered to evaluate the conditions of the Slovenian facilities and appropriate corrective actions are considered. The result might be the identification of the need for modification at the licensee, the need for modification of internal procedures in the SNSA or even the proposal for the modification of regulations. Information system helps everybody to track the process of evaluation and proper logging of activities. (author)

  13. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  14. operation zitadelle (kursk)

    African Journals Online (AJOL)

    Administrator

    describe military strategy as a sub-component of a broader term, namely national or ... the allocation of the forces and resources required to achieve those objectives could be .... tactical assets, might be considered operational level actions.

  15. Operations Strategy in practice

    DEFF Research Database (Denmark)

    Rytter, Niels Gorm; Koch, Christian; Boer, Harry

    2005-01-01

    In this paper, we describe and illustrate a new, action-based longitudinal case study approach, which aims at helping scholars narrow the gap between the theory and practice of Operations Strategy (OS). First, we elaborate on the need for new research methods for studying OS in practice. Then, we...... and disadvantages of the method. Finally, we draw conclusions on its potential for operations strategy and operations management studies.......In this paper, we describe and illustrate a new, action-based longitudinal case study approach, which aims at helping scholars narrow the gap between the theory and practice of Operations Strategy (OS). First, we elaborate on the need for new research methods for studying OS in practice. Then, we...

  16. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1983-10-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes. As appropriate, these standards will be revised periodically to accommodate comments and reflect new information or experience

  17. Information Operations: Where Next?

    National Research Council Canada - National Science Library

    Buchholz, David R

    2005-01-01

    ... to standardized IO training and integration across the combatant commands. For this reason and others there is a compelling argument for the major responsibility for DoD information operations integration to fall under the control of U.S...

  18. Operable Unit Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of operable unit data from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  19. Nuclear material operations manuals

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  20. Observer's Report - Okinawa Operation

    National Research Council Canada - National Science Library

    Todd, W. N., Jr

    1945-01-01

    ... for temporary duty in connection with the Okinawa Operation. By verbal agreement between observers, it was decided that each officer would cover certain activities and thus have a complete coverage without duplication...

  1. Payroll Operational Data Store

    Data.gov (United States)

    Social Security Administration — The Payroll ODS will provide a single repository of payroll data to produce accurate and timely financial reports to support operating, budget, and policy decisions.

  2. Operant Conditioning and Education.

    Science.gov (United States)

    de Noronha, Mario

    A case study of a learning disabled 8-year-old with behavior disturbancs is presented to highlight the use of operant conditioning in cutting down educational costs and easing the teacher's class management problems. (CL)

  3. Operating experience with snubbers

    International Nuclear Information System (INIS)

    Levin, H.; Cudlin, R.

    1978-06-01

    Recent operating experience with hydraulic and mechanical snubbers has indicated that there is a need to evaluate current practice in the industry associated with snubber qualification testing programs, design and analysis procedures, selection and specification criteria, and the preservice inspection and inservice surveillance programs. The report provides a summary of operational experiences that represent problems that are generic throughout the industry. Generic Task A-13 is part of the NRC Program for the Resolution of Generic Issues Related to Nuclear Power Plants described in NUREG-0410. The report is based upon a rather large amount of data that have become available in the past four years. These data have been evaluated by the Division of Operating Reactors to develop a data base for use in connection with several NRC activities including Category A, Technical Activity A-13 (Snubbers); the Standard Review Plan; future Regulatory Guides; ASME Code Provisions; and various technical specifications of operating nuclear power plants

  4. Modelling arithmetic operations

    Energy Technology Data Exchange (ETDEWEB)

    Shabanov-kushnarenk, Yu P

    1981-01-01

    The possibility of modelling finite alphabetic operators using formal intelligence theory, is explored, with the setting up of models of a 3-digit adder and a multidigit subtractor, as examples. 2 references.

  5. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  6. Operations Acceptance Management

    OpenAIRE

    Suchá, Ivana

    2010-01-01

    This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

  7. Treasury operations management

    OpenAIRE

    Laurențiu Dumitru ANDREI; Petre BREZEANU

    2014-01-01

    Amid the globalization and centralization of treasury operations, establishing the principles for their optimal management is the instrument by means of which economic stability, market dynamics and standards of living can be ensured. The directions of these principles, as well as their flexibility, depend on correctly identifying the objectives of the financial management planning of treasury operations, in compliance with European and international policies related to this area.

  8. Power reactors operational diagnosis

    International Nuclear Information System (INIS)

    Dach, K.; Pecinka, L.

    1976-01-01

    The definition of reactor operational diagnostics is presented and the fundamental trends of research are determined. The possible sources of power reactor malfunctions, the methods of defect detection, the data evaluation and the analysis of the results are discussed in detail. In view of scarcity of a theoretical basis and of insufficient in-core instrumentation, operational diagnostics cannot be as yet incorporated in a computer-aided reactor control system. (author)

  9. Operational Waste Volume Projection

    Energy Technology Data Exchange (ETDEWEB)

    STRODE, J.N.

    2000-08-28

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000.

  10. Operational waste volume projection

    International Nuclear Information System (INIS)

    Koreski, G.M.; Strode, J.N.

    1995-06-01

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the tri-party agreement. Assumptions are current as of June 1995

  11. Operating system MINIX

    OpenAIRE

    JIRKŮ, Radek

    2012-01-01

    This thesis introduces readers to the MINIX operating system, which was used in the creation of the Linux OS. It discusses the history and development of the system and explains its core and the file system. Also solves MINIX installation and configuration of the virtual machine at each step and deals with disputes that had a creator of Minix creator of Linux. In conclusion, compared with Linux MINIX and summarizes the advantages and disadvantages and the use of the operating system at present.

  12. Operational Waste Volume Projection

    International Nuclear Information System (INIS)

    STRODE, J.N.

    2000-01-01

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000

  13. Pulsed rf operation analysis

    International Nuclear Information System (INIS)

    Puglisi, M.; Cornacchia, M.

    1981-01-01

    The need for a very low final amplifier output impedance, always associated with class A operation, requires a very large power waste in the final tube. The recently suggested pulsed rf operation, while saving a large amount of power, increases the inherent final amplifier non linearity. A method is presented for avoiding the large signal non linear analysis and it is shown how each component of the beam induced voltage depends upon all the beam harmonics via some coupling coefficients which are evaluated

  14. Quality in drilling operations

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, E; Gervais, I [Sedco Forex Jacintoport Facility, Channelview, TX (United States); Le Moign, Y; Pangarkar, S; Stibbs, B [Sedco Forex, Montrouge (France); McMorran, P [Sedco Forex, Pau (France); Nordquist, E [Dubai Petroleum Company, Dubai (United Arab Emirates); Pittman, T [Sedco Forex, Perth (Australia); Schindler, H [Sedco Forex, Dubai (United Arab Emirates); Scott, P [Woodside Offshore Petroleum Pty. Ltd., Perth (Australia)

    1997-12-31

    Driven by cost and profitability pressures, quality has taken on new meaning and importance in the oil field during the past decade. In drilling operations, new initiatives have led to cooperative team efforts between operators and drilling contractors to enhance quality. In this article examples are given of how one drilling contractor, by adopting a quality culture, is reaping major benefits for its clients as well as its employees. 22 figs., 19 refs.

  15. Operation of the accelerator

    International Nuclear Information System (INIS)

    GANIL Team

    1992-01-01

    The operation of the GANIL accelerator during 1991 and the first half of 1992 is reported. Results obtained with new beams, metallic beams and the first tests with the new injector system using an ECR source installed on a 100 kV platform are also given. Statistics of operation and beam characteristics are presented. The computer control system is also discussed. (K.A.) 7 refs.; 3 figs.; 8 tabs

  16. Quality in drilling operations

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, E.; Gervais, I. [Sedco Forex Jacintoport Facility, Channelview, TX (United States); Le Moign, Y.; Pangarkar, S.; Stibbs, B. [Sedco Forex, Montrouge (France); McMorran, P. [Sedco Forex, Pau (France); Nordquist, E. [Dubai Petroleum Company, Dubai (United Arab Emirates); Pittman, T. [Sedco Forex, Perth (Australia); Schindler, H. [Sedco Forex, Dubai (United Arab Emirates); Scott, P. [Woodside Offshore Petroleum Pty. Ltd., Perth (Australia)

    1996-12-31

    Driven by cost and profitability pressures, quality has taken on new meaning and importance in the oil field during the past decade. In drilling operations, new initiatives have led to cooperative team efforts between operators and drilling contractors to enhance quality. In this article examples are given of how one drilling contractor, by adopting a quality culture, is reaping major benefits for its clients as well as its employees. 22 figs., 19 refs.

  17. Microkernel operating systems

    OpenAIRE

    Rudić, Ratko

    2016-01-01

    This thesis outlines history, development and design of microkernel based operating systems. While the idea of microkernel based architecture emerged early in computer science, there are still very few systems adopting this technology. Microkernel operating systems are divided into several different groups and families that frequently share rules, design decisions and development processes. This master thesis focuses on the main representatives of these groups as well as their mutual...

  18. Operating experience: safety perspective

    International Nuclear Information System (INIS)

    Piplani, Vivek; Krishnamurthy, P.R.; Kumar, Neeraj; Upadhyay, Devendra

    2015-01-01

    Operating Experience (OE) provides valuable information for improving NPP safety. This may include events, precursors, deviations, deficiencies, problems, new insights to safety, good practices, lessons and corrective actions. As per INSAG-10, an OE program caters as a fundamental means for enhancing the defence-in-depth at NPPs and hence should be viewed as ‘Continuous Safety Performance Improvement Tool’. The ‘Convention on Nuclear Safety’ also recognizes the OE as a tool of high importance for enhancing the NPP safety and its Article 19 mandates each contracting party to establish an effective OE program at operating NPPs. The lessons drawn from major accidents at Three Mile Island, Chernobyl and Fukushima Daiichi NPPs had prompted nuclear stalwarts to change their safety perspective towards NPPs and to frame sound policies on issues like safety culture, severe accident prevention and mitigation. An effective OE program, besides correcting current/potential problems, help in proactively improving the NPP design, operating and maintenance procedures, practices, training, etc., and thus plays vital role in ensuring safe and efficient operation of NPPs. Further it enhances knowledge with regard to equipment operating characteristics, system performance trends and provides data for quantitative and qualitative safety analysis. Besides all above, an OE program inculcates a learning culture in the organisation and thus helps in continuously enhancing the expertise, technical competency and knowledge base of its staff. Nuclear and Radiation Facilities in India are regulated by Atomic Energy Regulatory Board (AERB). Operating Plants Safety Division (OPSD) of AERB is involved in managing operating experience activities. This paper provides insights about the operating experience program of OPSD, AERB (including its on-line data base namely OPSD STAR) and its utilisation in improving the regulations and safety at Indian NPPs/projects. (author)

  19. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1994-06-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes. Revision 7 was published in January 1993 and became effective in August 1993. Supplement 1 is being issued primarily to implement administrative changes to the requalification examination program resulting from the amendment to 10 CFR 55 that eliminated the requirement for every licensed operator to pass an NRC-conducted requalification examination as a condition for license renewal. The supplement does not substantially alter either the initial or requalification examination processes and will become effective 30 days after its publication is noticed in the Federal Register. The corporate notification letters issued after the effective date will provide facility licensees with at least 90 days notice that the examinations will be administered in accordance with the revised procedures

  20. Pipeline system operability review

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Kjell [Det Norske Veritas (Norway); Davies, Ray [CC Technologies, Dublin, OH (United States)

    2005-07-01

    Pipeline operators are continuously working to improve the safety of their systems and operations. In the US both liquid and gas pipeline operators have worked with the regulators over many years to develop more systematic approaches to pipeline integrity management. To successfully manage pipeline integrity, vast amounts of data from different sources needs to be collected, overlaid and analyzed in order to assess the current condition and predict future degradation. The efforts undertaken by the operators has had a significant impact on pipeline safety, nevertheless, during recent years we have seen a number of major high profile accidents. One can therefore ask how effective the pipeline integrity management systems and processes are. This paper will present one methodology 'The Pipeline System Operability Review' that can evaluate and rate the effectiveness of both the management systems and procedures, as well as the technical condition of the hardware. The result from the review can be used to compare the performance of different pipelines within one operating company, as well as benchmark with international best practices. (author)

  1. New operator's console recorder

    International Nuclear Information System (INIS)

    Anon.

    2009-01-01

    This article described a software module that automatically records images being shown on multiple HMI or SCADA operator's displays. Videos used for monitoring activities at industrial plants can be combined with the operator console videos and data from a process historian. This enables engineers, analysts or investigators to see what is occurring in the plant, what the operator is seeing on the HMI screen, and all relevant real-time data from an event. In the case of a leak at a pumping station, investigators could watch plant video taken at a remote site showing fuel oil creeping across the floor, real-time data being acquired from pumps, valves and the receiving tank while the leak is occurring. The video shows the operator's HMI screen as well as the alarm screen that signifies the leak detection. The Longwatch Operator's Console Recorder and Video Historian are used together to acquire data about actual plant plant management because they show everything that happens during an event. The Console Recorder automatically retrieves and replays operator displays by clicking on a time-based alarm or system message. Play back of video feed is a valuable tool for training and analysis purposes, and can help mitigate insurance and regulatory issues by eliminating uncertainty and conjecture. 1 fig.

  2. Repository operational criteria analysis

    International Nuclear Information System (INIS)

    Hageman, J.P.; Chowdhury, A.H.

    1992-08-01

    The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations, considering the interfaces and impacts of any potential changes to those regulations. The study addresses regulatory criteria related to the preclosure aspects of the geologic repository. The study task developed regulatory concepts or potential repository operational criteria (PROC) based on analysis of a repository's safety functions and other regulations for similar facilities. These regulatory concepts or PROC were used as a basis to assess the sufficiency and adequacy of the current criteria in 10 CFR Part 60. Where the regulatory concepts were same as current operational criteria, these criteria were referenced. The operations criteria referenced or the PROC developed are given in this report. Detailed analyses used to develop the regulatory concepts and any necessary PROC for those regulations that may require a minor change are also presented. The results of the ROC task showed a need for further analysis and possible major rule change related to the design bases of a geologic repository operations area, siting, and radiological emergency planning

  3. Pipeline system operability review

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Kjell [Det Norske Veritas (Norway); Davies, Ray [CC Technologies, Dublin, OH (United States)

    2005-07-01

    Pipeline operators are continuously working to improve the safety of their systems and operations. In the US both liquid and gas pipeline operators have worked with the regulators over many years to develop more systematic approaches to pipeline integrity management. To successfully manage pipeline integrity, vast amounts of data from different sources needs to be collected, overlaid and analyzed in order to assess the current condition and predict future degradation. The efforts undertaken by the operators has had a significant impact on pipeline safety, nevertheless, during recent years we have seen a number of major high profile accidents. One can therefore ask how effective the pipeline integrity management systems and processes are. This paper will present one methodology 'The Pipeline System Operability Review' that can evaluate and rate the effectiveness of both the management systems and procedures, as well as the technical condition of the hardware. The result from the review can be used to compare the performance of different pipelines within one operating company, as well as benchmark with international best practices. (author)

  4. Mission operations technology

    Science.gov (United States)

    Varsi, Giulio

    In the last decade, the operation of a spacecraft after launch has emerged as a major component of the total cost of the mission. This trend is sustained by the increasing complexity, flexibility, and data gathering capability of the space assets and by their greater reliability and consequent longevity. The trend can, however, be moderated by the progressive transfer of selected functions from the ground to the spacecraft and by application, on the ground, of new technology. Advances in ground operations derive from the introduction in the mission operations environment of advanced microprocessor-based workstations in the class of a few million instructions per second and from the selective application of artificial intelligence technology. In the last few years a number of these applications have been developed, tested in operational settings and successfully demonstrated to users. Some are now being integrated in mission operations facilities. An analysis of mission operations indicates that the key areas are: concurrent control of multiple missions; automated/interactive production of command sequences of high integrity at low cost; automated monitoring of spacecraft health and automated aides for fault diagnosis; automated allocation of resources; automated processing of science data; and high-fidelity, high-speed spacecraft simulation. Examples of major advances in selected areas are described.

  5. Operation guide device

    International Nuclear Information System (INIS)

    Oohashi, Hideaki.

    1982-01-01

    Purpose: To enable a reactor operator to perform safety and sure inspection for a reactor and take manual start-up operations for the necessary systems at optimum timing with neither misoperation nor misjudging after the occurrence of reactor accidents. Constitution: If a signal judging circuit judges the generation of an accident signal for a reactor, the circuit issues an output signal to start the time counting operation of a time counter thereby inform the elapse of time after the occurrence of the reactor accident. Further, a time signal generated on every predetermined time from the time counter and a process signal indicating the reactor status are logically judged and, if the conditions for taking manual start-up operations, are satisfied, a start-up instruction signal is generated. An information signal is formed depending on the start-up instruction and the content of the start-up instruction is displayed on every predetermined time by the information signal, whereby the operator can perform the manual start-up operations at the optimum timings. (Moriyama, K.)

  6. Reactor operational transient analysis

    International Nuclear Information System (INIS)

    Shin, W.K.; Chae, S.K.; Han, K.I.; Yang, K.S.; Chung, H. D.; Kim, H.G.; Moon, H.J.; Ryu, Y.H.

    1983-01-01

    To build up efficient capability of safety review and inspection for the nuclear power plants, four area of studies have performed as follows: 1) In order to search the most optimized operating method during load follow operating schemes, automatic control and normal control, are compared each other under the CAOC condition. The analysis performed by DDID code has shown that the reactor has to be controlled by the operator manually during load follow operation. 2) Through the sensitivity analysis by COBRA code, the operating parameters, such as coolant pressure, flow rate, inlet temperature, and power distribution are shown to be important to the determination of DNBR. Expecially, inlet temperature of primary coolant system is appeared as the most senstive parameter on DNBR. 3) FRAPCON code is adapted to study the sensitivity of several operational parameters on the mechanical properties of reactor fuel rod. 4) The calculations procedure which is required to be obtained the neutron fluence at the reactor vessel and the spectrum at the surveillance capsule is established. The results of computation are conpared with those of FSAR and SWRI report and proved its applicability to reactor surveillance program. (Author)

  7. Thermal Operating Modes

    International Nuclear Information System (INIS)

    Bechtel SAIC Company

    2002-01-01

    Higher and lower temperature operating modes (e.g., above and below the boiling point of water) are alternative approaches to managing the heat produced by the radioactive decay of spent nuclear fuel. Current analyses indicate that a repository at the Yucca Mountain site is likely to comply with applicable safety standards regardless of the particular thermal operating mode. Both modes have potential advantages and disadvantages. With a higher temperature operating mode (HTOM), waste packages (WPs) can be placed closer together. This reduces the number of drifts, the required emplacement area, construction costs, and occupational risks to construction workers. In addition, the HTOM would minimize the amount of water that might contact the waste for hundreds of years after closure. On the other hand, higher temperatures introduce uncertainties in the understanding of the long-term performance of the repository because of uncertainties in the thermal effects on WP lifetime and the near-field environment around the drifts. A lower temperature operating mode (LTOM) has the potential to reduce uncertainties in long-term performance of the repository by limiting the effects of temperature on WP lifetime and on the near-field environment around the drifts. Depending on the combination of operating parameters, a LTOM could require construction of additional drifts, a larger emplacement area, increased construction costs, increased occupational risks to construction works, and a longer period of ventilation than a HTOM. The repository design for the potential Yucca Mountain site is flexible and can be constructed and operated in various operating modes to achieve specific technical objectives, accommodate future policy decisions, and use of new information. For example, the flexible design can be operated across a range of temperatures and can be tailored to achieve specific thermal requirements in the future. To accommodate future policy decisions, the repository can be

  8. Operational Dynamic Configuration Analysis

    Science.gov (United States)

    Lai, Chok Fung; Zelinski, Shannon

    2010-01-01

    Sectors may combine or split within areas of specialization in response to changing traffic patterns. This method of managing capacity and controller workload could be made more flexible by dynamically modifying sector boundaries. Much work has been done on methods for dynamically creating new sector boundaries [1-5]. Many assessments of dynamic configuration methods assume the current day baseline configuration remains fixed [6-7]. A challenging question is how to select a dynamic configuration baseline to assess potential benefits of proposed dynamic configuration concepts. Bloem used operational sector reconfigurations as a baseline [8]. The main difficulty is that operational reconfiguration data is noisy. Reconfigurations often occur frequently to accommodate staff training or breaks, or to complete a more complicated reconfiguration through a rapid sequence of simpler reconfigurations. Gupta quantified a few aspects of airspace boundary changes from this data [9]. Most of these metrics are unique to sector combining operations and not applicable to more flexible dynamic configuration concepts. To better understand what sort of reconfigurations are acceptable or beneficial, more configuration change metrics should be developed and their distribution in current practice should be computed. This paper proposes a method to select a simple sequence of configurations among operational configurations to serve as a dynamic configuration baseline for future dynamic configuration concept assessments. New configuration change metrics are applied to the operational data to establish current day thresholds for these metrics. These thresholds are then corroborated, refined, or dismissed based on airspace practitioner feedback. The dynamic configuration baseline selection method uses a k-means clustering algorithm to select the sequence of configurations and trigger times from a given day of operational sector combination data. The clustering algorithm selects a simplified

  9. Using fractional order method to generalize strengthening generating operator buffer operator and weakening buffer operator

    OpenAIRE

    Wu, L.; Liu, S.; Yang, Yingjie

    2016-01-01

    Traditional integer order buffer operator is extended to fractional order buffer operator, the corresponding relationship between the weakening buffer operator and the strengthening buffer operator is revealed. Fractional order buffer operator not only can generalize the weakening buffer operator and the strengthening buffer operator, but also realize tiny adjustment of buffer effect. The effectiveness of GM(1,1) with the fractional order buffer operator is validated by six cases.

  10. Upgrade of reactor operation technology

    International Nuclear Information System (INIS)

    Itoh, Hideaki; Suzuki, Toshiaki; O-kawa, Toshikatsu

    2003-01-01

    To improve operational reliability and availability, the operation technology for a fast reactor was developed in the ''JOYO''. This report describes the upgrading of the simulator, plant operation management tools and fuel handling system for the MK-III core operation. The simulator was modified to the MK-III version to verify operation manuals, and to train operators in MK-III operation. The plant operation management tool was replaced on the operation experience to increase the reliability and efficiency of plant management works relating to plant operation and maintenance. To shorten the refueling period, the fuel handling system was upgraded to full automatic remote control. (author)

  11. Licensed operating reactors

    International Nuclear Information System (INIS)

    1990-01-01

    The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units is provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the ERRATA page. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

  12. Operator representations of frames

    DEFF Research Database (Denmark)

    Christensen, Ole; Hasannasab, Marzieh

    2017-01-01

    of the properties of the operator T requires more work. For example it is a delicate issue to obtain a representation with a bounded operator, and the availability of such a representation not only depends on the frame considered as a set, but also on the chosen indexing. Using results from operator theory we show......The purpose of this paper is to consider representations of frames {fk}k∈I in a Hilbert space ℋ of the form {fk}k∈I = {Tkf0}k∈I for a linear operator T; here the index set I is either ℤ or ℒ0. While a representation of this form is available under weak conditions on the frame, the analysis...... that by embedding the Hilbert space ℋ into a larger Hilbert space, we can always represent a frame via iterations of a bounded operator, composed with the orthogonal projection onto ℋ. The paper closes with a discussion of an open problem concerning representations of Gabor frames via iterations of a bounded...

  13. Automated emergency operating procedures

    International Nuclear Information System (INIS)

    Perez-Ramirez, G.; Nelson, P.F.

    1990-01-01

    This paper describes the development of a training tool for the symptom oriented emergency operating procedures used at the Laguna Verde Nuclear Power Plant. EOPs and operator training are intended to assist the operator for managing accident situations. A prototype expert system based on the EOPs has been developed for operator training. The demonstration expert system was developed using a commercial shell. The knowledge base consists of two parts. The specific operator actions to be executed for 5 selected accident sequences and the EOPs steps for the reactor pressure vessel control of the water level, pressure, and power. The knowledge is expressed in the form of IF-THEN production rules. A typical training session will display a set of conditions and will prompt the trainee to indicate the appropriate step to perform. This mode will guide the trainee through selected accident sequences. A second mode of the expert system will prompt the trainee for the current plant conditions and the expert system will respond with the EOPs which are required to be performed under these conditions. This allows the trainee to study What if situations

  14. ITER-FEAT operation

    International Nuclear Information System (INIS)

    Shimomura, Y.; Huget, M.; Mizoguchi, T.; Murakami, Y.; Polevoi, A.; Shimada, M.; Aymar, R.; Chuyanov, V.; Matsumoto, H.

    2001-01-01

    ITER is planned to be the first fusion experimental reactor in the world operating for research in physics and engineering. The first 10 years' operation will be devoted primarily to physics issues at low neutron fluence and the following 10 years' operation to engineering testing at higher fluence. ITER can accommodate various plasma configurations and plasma operation modes such as inductive high Q modes, long pulse hybrid modes, non-inductive steady-state modes, with large ranges of plasma current, density, beta and fusion power, and with various heating and current drive methods. This flexibility will provide an advantage for coping with uncertainties in the physics database, in studying burning plasmas, in introducing advanced features and in optimizing the plasma performance for the different programme objectives. Remote sites will be able to participate in the ITER experiment. This concept will provide an advantage not only in operating ITER for 24 hours per day but also in involving the world-wide fusion communities and in promoting scientific competition among the Parties. (author)

  15. Licensed operating reactors

    International Nuclear Information System (INIS)

    1989-06-01

    The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units are provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the ERRATA page. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

  16. Aging and operation results

    International Nuclear Information System (INIS)

    Chaussade, J.P.

    1984-01-01

    The correlation between the different accelerated aging methods and operation reality has to be done with solid and representative elements in matter of tests as well as in operating experience. In 1990 in France, the first unit will be 13 years operating, there will be 34 units of 900 MW PWR and 18 units of 1300 MW PWR in operation. The total of experience will be equivalent to 400 reactor-years. Only computerised means permit to collect all corresponding events, to manage them and to draw a lot of conclusions. One describes these computerised applications explaining the different events collected, data input and interrogating possibilities. The first application, called ''events file'', records all important events in nuclear plants. For each of these events, an event reporting format is set up as soon as first informations are known and then is put into the file. An updating is performed when the event is better known and analyzed. Interrogating programs allow no specialist to access easily to this data bank. So it is possible to collect events of the same nature, of the same equipments or of the same systems. The second application called S.R.D.F. (fiability data bank system) collects all maintenance operations on certain mechanical and electrical equipment. These two computerized applications complete on another in the way they allow to do fiability and availability studies for some equipments or for some elements of a nuclear plant [fr

  17. ITER-FEAT operation

    International Nuclear Information System (INIS)

    Shimomura, Y.; Huguet, M.; Mizoguchi, T.; Murakami, Y.; Polevoi, A.R.; Shimada, M.; Aymar, R.; Chuyanov, V.A.; Matsumoto, H.

    2001-01-01

    ITER is planned to be the first fusion experimental reactor in the world operating for research in physics and engineering. The first ten years of operation will be devoted primarily to physics issues at low neutron fluence and the following ten years of operation to engineering testing at higher fluence. ITER can accommodate various plasma configurations and plasma operation modes, such as inductive high Q modes, long pulse hybrid modes and non-inductive steady state modes, with large ranges of plasma current, density, beta and fusion power, and with various heating and current drive methods. This flexibility will provide an advantage for coping with uncertainties in the physics database, in studying burning plasmas, in introducing advanced features and in optimizing the plasma performance for the different programme objectives. Remote sites will be able to participate in the ITER experiment. This concept will provide an advantage not only in operating ITER for 24 hours a day but also in involving the worldwide fusion community and in promoting scientific competition among the ITER Parties. (author)

  18. Radioastron flight operations

    Science.gov (United States)

    Altunin, V. I.; Sukhanov, K. G.; Altunin, K. R.

    1993-01-01

    Radioastron is a space-based very-long-baseline interferometry (VLBI) mission to be operational in the mid-90's. The spacecraft and space radio telescope (SRT) will be designed, manufactured, and launched by the Russians. The United States is constructing a DSN subnet to be used in conjunction with a Russian subnet for Radioastron SRT science data acquisition, phase link, and spacecraft and science payload health monitoring. Command and control will be performed from a Russian tracking facility. In addition to the flight element, the network of ground radio telescopes which will be performing co-observations with the space telescope are essential to the mission. Observatories in 39 locations around the world are expected to participate in the mission. Some aspects of the mission that have helped shaped the flight operations concept are: separate radio channels will be provided for spacecraft operations and for phase link and science data acquisition; 80-90 percent of the spacecraft operational time will be spent in an autonomous mode; and, mission scheduling must take into account not only spacecraft and science payload constraints, but tracking station and ground observatory availability as well. This paper will describe the flight operations system design for translating the Radioastron science program into spacecraft executed events. Planning for in-orbit checkout and contingency response will also be discussed.

  19. Licensed operating reactors

    International Nuclear Information System (INIS)

    1990-01-01

    The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

  20. About APPLE II Operation

    International Nuclear Information System (INIS)

    Schmidt, T.; Zimoch, D.

    2007-01-01

    The operation of an APPLE II based undulator beamline with all its polarization states (linear horizontal and vertical, circular and elliptical, and continous variation of the linear vector) requires an effective description allowing an automated calculation of gap and shift parameter as function of energy and operation mode. The extension of the linear polarization range from 0 to 180 deg. requires 4 shiftable magnet arrrays, permitting use of the APU (adjustable phase undulator) concept. Studies for a pure fixed gap APPLE II for the SLS revealed surprising symmetries between circular and linear polarization modes allowing for simplified operation. A semi-analytical model covering all types of APPLE II and its implementation will be presented

  1. Licensed operating reactors

    International Nuclear Information System (INIS)

    Hartfield, R.A.

    1990-03-01

    The US Nuclear Regulatory Commission's monthly Licensed Operating Reactors Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

  2. Simulators for NPP operators

    International Nuclear Information System (INIS)

    Yuzhakov, A.Yu.

    2010-01-01

    The author reports on the application of full-scale simulators for training and maintaining proficiency of unit control room operators that is an essential element of Russian NPPs personnel education system. The existing simulators for the unit control room operating personnel are listed. The integrated approach to developing and maintaining the training hardware is described. The integrated approach is being implemented on the basis of observance of the existing requirements to training hardware, improvement of regulations, control from a single centre responsible for the provision of support to the activities, inclusion into the plans of simulators for development of skills for operating control over equipment and systems, as well as control from local boards [ru

  3. Theory of linear operations

    CERN Document Server

    Banach, S

    1987-01-01

    This classic work by the late Stefan Banach has been translated into English so as to reach a yet wider audience. It contains the basics of the algebra of operators, concentrating on the study of linear operators, which corresponds to that of the linear forms a1x1 + a2x2 + ... + anxn of algebra.The book gathers results concerning linear operators defined in general spaces of a certain kind, principally in Banach spaces, examples of which are: the space of continuous functions, that of the pth-power-summable functions, Hilbert space, etc. The general theorems are interpreted in various mathematical areas, such as group theory, differential equations, integral equations, equations with infinitely many unknowns, functions of a real variable, summation methods and orthogonal series.A new fifty-page section (``Some Aspects of the Present Theory of Banach Spaces'''') complements this important monograph.

  4. Operations management for construction

    CERN Document Server

    March, Chris

    2009-01-01

    Students studying construction management and related subjects need to have a broad understanding of the major aspects of controlling the building processes. Operations Management for Construction is one of three textbooks (Business Organisation, Operations Management and Finance Control) written to systematically cover the field. Focusing on construction sites and operations which are challenging to run, Chris March explores issues such as the setting up of the site, the deciding of the methodology of construction, and the sequence of work and resourcing. As changing and increasing regulations affect the way sites are managed, he also considers the issues and methods of successful administering, safety, quality and environment. Finally, the contractor's responsibility to the environment, including relationships with third parties, selection of materials, waste management and sustainability is discussed. Chris March has a wealth of practical experience in the construction industry, as well as considerable exp...

  5. ORNL radioactive waste operations

    International Nuclear Information System (INIS)

    Sease, J.D.; King, E.M.; Coobs, J.H.; Row, T.H.

    1982-01-01

    Since its beginning in 1943, ORNL has generated large amounts of solid, liquid, and gaseous radioactive waste material as a by-product of the basic research and development work carried out at the laboratory. The waste system at ORNL has been continually modified and updated to keep pace with the changing release requirements for radioactive wastes. Major upgrading projects are currently in progress. The operating record of ORNL waste operation has been excellent over many years. Recent surveillance of radioactivity in the Oak Ridge environs indicates that atmospheric concentrations of radioactivity were not significantly different from other areas in East Tennesseee. Concentrations of radioactivity in the Clinch River and in fish collected from the river were less than 4% of the permissible concentration and intake guides for individuals in the offsite environment. While some radioactivity was released to the environment from plant operations, the concentrations in all of the media sampled were well below established standards

  6. Licensed operating reactors

    International Nuclear Information System (INIS)

    1989-08-01

    The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

  7. International co-operation

    International Nuclear Information System (INIS)

    1997-01-01

    In 1996, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) ensured the Slovak Republic (SR) obligations with relation to the international agreements and with the SR membership in the IAEA.International co-operation has been ensured on the basis of the bilateral international agreements. With the Ministry of Foreign Affairs co-operation, the SR fulfilled its financial obligations to this organization in due time and in the full scope. Representing Central and Eastern Europe interest in the Board of Governors, the SR participation in the highest executive in the highest executive authority was finished in 1996.The Board of Governors Vice-chairman position was executed by NRA SR Chairman. 5 national and 6 regional technical co-operation and assistance projects were realized in 1996. 12 organizations participated in these projects and accordingly 104 experts took part in training programmes, scientific visits or as the mission members abroad. Besides, Slovak experts participated at work of technical advisory and consultation groups with the significant assistance. In the framework of IAEA co-operation, the SR was visited by 11 expert missions formed by 28 experts from 19 countries including IAEA. Slovak organizations, namely institutes of the Academy of Sciences, Slovak research centres and universities participated in IAEA scientific and research activities through NRA SR. 15 scientific contracts in total were approved and realized and these contracts are utilized as supplementary financing of the own scientific and research projects. Other international co-operation and regional co-operation activities of the NRA SR in 1996 are reviewed

  8. GNF2 Operating Experience

    International Nuclear Information System (INIS)

    Schardt, John

    2007-01-01

    GNF's latest generation fuel product, GNF2, is designed to deliver improved nuclear efficiency, higher bundle and cycle energy capability, and more operational flexibility. But along with high performance, our customers face a growing need for absolute fuel reliability. This is driven by a general sense in the industry that LWR fuel reliability has plateaued. Too many plants are operating with fuel leakers, and the impact on plant operations and operator focus is unacceptable. The industry has responded by implementing an INPO-coordinated program aimed at achieving leaker-free reliability by 2010. One focus area of the program is the relationship between fuel performance (i.e., duty) and reliability. The industry recognizes that the right balance between performance and problem-free fuel reliability is critical. In the development of GNF2, GNF understood the requirement for a balanced solution and utilized a product development and introduction strategy that specifically addressed reliability: evolutionary design features supported by an extensive experience base; thoroughly tested components; and defense-in-depth mitigation of all identified failure mechanisms. The final proof test that the balance has been achieved is the application of the design, initially through lead use assemblies (LUAs), in a variety of plants that reflect the diversity of the BWR fleet. Regular detailed surveillance of these bundles provides the verification that the proper balance between performance and reliability has been achieved. GNF currently has GNF2 lead use assemblies operating in five plants. Included are plants that have implemented extended power up-rates, plants on one and two-year operating cycles, and plants with and without NobleChem TM and zinc injection. The leading plant has undergone three pool-side inspections outages to date. This paper reviews the actions taken to insure GNF2's reliability, and the lead use assembly surveillance data accumulated to date to validate

  9. SSCL Commissioning and Operations

    International Nuclear Information System (INIS)

    1992-01-01

    The SSC, with an energy of 20 TeV/Beam, requires a sequence of individual accelerators of increasing energy in the injector chain. These are the Linac, Low Energy Booster, Medium Energy Booster, and High Energy Booster. Each accelerator system must be completed in sequence in order to provide beam to the next higher energy accelerator. The collider itself is comprised of ten sectors, each of which in terms of superconducting magnet bending strength, is equivalent to two HEB injectors. The completion of all injectors and collider sectors is required before stored beams can circulate in preparation for colliding beam operation. Four experimental halls are planned for the detector systems. Each major detector will be assembled in one of the halls by a world-wide collaboration of scientists. In addition, above ground facilities provide shops and test facilities for accelerator technical systems, superconducting magnet and materials research and development, and for detector assembly and operations. The purpose of this report is to present a plan for the sequential commissioning and operation of these individual accelerators and other technical facilities of the SSC. A central objective of this plan is to describe the activities at the SSCL that are not included as part of the construction project TPC, even though they occur during the overall project construction time-frame. Examples of such activities include the operation of general laboratory facilities and services not specifically related to construction, the operating costs for the individual accelerators in the injector chain once these facilities have been commissioned, and the costs of SSCL physics research groups. The Department of Energy has provided the following decision with regard to these operations categories for the SSCL

  10. The operation and maintenance manual

    International Nuclear Information System (INIS)

    Klein, W.; Krotil, H.; Stoll, A.

    1975-01-01

    The Operating Manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the Operating Manual. It contains, appropriately arranged, the necessary system and other diagrams, drawings, lists, licensing documents and similar material, which are necessary for understanding the design, for testing, for obtaining the operating licence and for the operation of individual systems and of the entire plant. (orig./RW) [de

  11. Piping engineering and operation

    International Nuclear Information System (INIS)

    1993-01-01

    The conference 'Piping Engineering and Operation' was organized by the Institution of Mechanical Engineers in November/December 1993 to follow on from similar successful events of 1985 and 1989, which were attended by representatives from all sectors of the piping industry. Development of engineering and operation of piping systems in all aspects, including non-metallic materials, are highlighted. The range of issues covered represents a balance between current practices and implementation of future international standards. Twenty papers are printed. Two, which are concerned with pressurized pipes or steam lines in the nuclear industry, are indexed separately. (Author)

  12. TRIGA reactor operating experience

    International Nuclear Information System (INIS)

    Anderson, T.V.

    1970-01-01

    The Oregon State TRIGA Reactor (OSTR) has been in operation 3 years. Last August it was upgraded from 250 kW to 1000 kW. This was accomplished with little difficulty. During the 3 years of operation no major problems have been experienced. Most of the problems have been minor in nature and easily corrected. They came from lazy susan (dry bearing), Westronics Recorder (dead spots in the range), The Reg Rod Magnet Lead-in Circuit (a new type lead-in wire that does not require the lead-in cord to coil during rod withdrawal hss been delivered, much better than the original) and other small corrections

  13. Topics in Operator Theory

    CERN Document Server

    Ball, Joseph A; Helton, JWilliam; Rodman, Leiba; Spitkovsky, Iiya

    2010-01-01

    This is the first volume of a collection of original and review articles on recent advances and new directions in a multifaceted and interconnected area of mathematics and its applications. It encompasses many topics in theoretical developments in operator theory and its diverse applications in applied mathematics, physics, engineering, and other disciplines. The purpose is to bring in one volume many important original results of cutting edge research as well as authoritative review of recent achievements, challenges, and future directions in the area of operator theory and its applications.

  14. Operational Design for Peace Enforcement: Lessons for the Operational Staff

    National Research Council Canada - National Science Library

    Neumann, Michael

    2004-01-01

    U.S. involvement in Somalia serves as a useful case study of the unique challenges an operational staff may face when applying operational design to the planning and execution of a peace enforcement operation. U.S...

  15. Systemic Operational Design: Enhancing the Joint Operation Planning Process

    National Research Council Canada - National Science Library

    Delacruz, Victor J

    2007-01-01

    Operational level commanders and their staffs require relevant and current joint doctrine that articulates the critical function of operational design and its role in the Joint Operation Planning Process (JOPP...

  16. Seminar 1. Joint Military Operations. Application of the Operational Reserve

    National Research Council Canada - National Science Library

    Copp, A

    1997-01-01

    .... As a means of achieving decisive effect at the operational level of war, the operational reserve should be considered an operational function and should be addressed as both a planning element...

  17. The operation and maintenance manual

    International Nuclear Information System (INIS)

    Stoll, A.; Krotil, H.; Klein, W.

    1976-01-01

    The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

  18. Cyber Operations Virtual Environment

    Science.gov (United States)

    2010-09-01

    capability independent of the operator’s willingness to make target responses (See, Macmillan & Creelman , 1991; Parasuraman, Masalonis, & Hancock, 2000...Ma, K-L. (2004). Visualization for security. Computer Graphics, 38, 4-6. Macmillan, N. A., & Creelman , C. D. (1991). Detection theory: A user’s

  19. Mission operations management

    Science.gov (United States)

    Rocco, David A.

    1994-01-01

    Redefining the approach and philosophy that operations management uses to define, develop, and implement space missions will be a central element in achieving high efficiency mission operations for the future. The goal of a cost effective space operations program cannot be realized if the attitudes and methodologies we currently employ to plan, develop, and manage space missions do not change. A management philosophy that is in synch with the environment in terms of budget, technology, and science objectives must be developed. Changing our basic perception of mission operations will require a shift in the way we view the mission. This requires a transition from current practices of viewing the mission as a unique end product, to a 'mission development concept' built on the visualization of the end-to-end mission. To achieve this change we must define realistic mission success criteria and develop pragmatic approaches to achieve our goals. Custom mission development for all but the largest and most unique programs is not practical in the current budget environment, and we simply do not have the resources to implement all of our planned science programs. We need to shift our management focus to allow us the opportunity make use of methodologies and approaches which are based on common building blocks that can be utilized in the space, ground, and mission unique segments of all missions.

  20. Operator/contractor relationships

    International Nuclear Information System (INIS)

    Smith, J.R.; Kidwell, C.K.; Unger, V.E.; Fercho, E.; Helmer, C.M.

    1992-01-01

    In May 1988, Shell Western E and P Inc. (SWEPI) and partners Elf Aquitaine Petroleum and Conoco Inc. signed a letter of intent with Canadian Marine Drilling Ltd. (Canmar) for provision of exploratory drilling and marine services on leases in OCS Lease Sale 109 in the Chukchi Sea, Alaska. The 5450 blocks offered in the remote sale area west of Point Barrow ranged from 3 to 240 miles (5 to 380 km) offshore in water depths from 26 to 263 feet (8 to 80 m). The principal interest tracts were at least 75 miles (120 km) offshore and north of 70 degrees N latitude. The remoteness and total lack of any oilfield infrastructure required considerable planning and coordination between Operator and Contractor in order to carry out the three-year drilling program efficiently and safely in an environmentally harsh and, at the same time, sensitive area. SWEPI and Canmar developed a close working relationship from the start of the project through a number of participative approaches to the problems that had to be solved. This paper reports that these included strong reliance on operational planning meetings, post-season analyses, and an overall emphasis on the teamwork required of both parties to carry out the first-ever drilling program in the Chukchi Sea. This approach led to a very successful operation for both parties and emphasizes the positive benefits achievable when Operator and Contractor work as a team

  1. Operations research and development

    African Journals Online (AJOL)

    The paper begins with a discussion of the concepts “operations research” .... have in common an emphasis on the “scientific” and quantitative aspects of .... It is important to ensure that the MCDA methodologies are sufficiently simple and .... 2006, is an excellent example of the application of OR techniques to a topic with.

  2. Operating US power reactors

    International Nuclear Information System (INIS)

    Silver, E.G.

    1988-01-01

    This update, which appears regularly in each issue of Nuclear Safety, surveys the operations of those power reactors in the US which have been issued operating licenses. Table 1 shows the number of such reactors and their net capacities as of September 30, 1987, the end of the three-month period covered in this report. Table 2 lists the unit capacity and forced outage rate for each licensed reactor for each of the three months (July, August, and September 1987) covered in this report and the cumulative values of these parameters since the beginning of commercial operation. In addition to the tabular data, this article discusses other significant occurrences and developments that affected licensed US power reactors during this reporting period. Status changes at Braidwood Unit 1, Nine Mile Point 2, and Beaver Valley 2 are discussed. Other occurrences discussed are: retraining of control-room operators at Peach Bottom; a request for 25% power for Shoreham, problems at Fermi 2 which delayed the request to go to 75% power; the results of a safety study of the N Reactor at Hanford; a proposed merger of Pacific Gas and Electric with Sacramento Municipal Utility District which would result in the decommissioning of Rancho Seco; the ordered shutdown of Oyster Creek; a minor radioactivity release caused by a steam generator tube rupture at North Anna 1; and 13 fines levied by the NRC on reactor licensees

  3. Cutback for grid operators

    International Nuclear Information System (INIS)

    Meulmeester, P.; De Laat, J.

    2006-01-01

    The Netherlands Competition Authority (NMa), in which the Office of Energy Regulation (DTe) is included plan to decrease the capital cost compensation (or weighted average cost of capital or WACC) for grid operators. In this article it is explained how the compensation is calculated, why this measure will be taken and what the effects of this cutback are [nl

  4. Snow-clearing operations

    CERN Multimedia

    EN Department

    2010-01-01

    To facilitate snow clearing operations, which commence at 4.30 in the morning, all drivers of CERN cars are kindly requested to park them together in groups. This will help us greatly assist us in our work. Thank-you for your help. Transport Group / EN-HE Tel. 72202

  5. Splunk operational intelligence cookbook

    CERN Document Server

    Diakun, Josh; Mock, Derek

    2014-01-01

    This book is intended for users of all levels who are looking to leverage the Splunk Enterprise platform as a valuable operational intelligence tool. The recipes provided in this book will appeal to individuals from all facets of a business - IT, Security, Product, Marketing, and many more!

  6. Global Operations Coevolution

    DEFF Research Database (Denmark)

    Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Gubi, Ebbe

    2013-01-01

    Companies are actively seeking competitive advantage through their choice of location and ownership of operations. The purpose of this chapter is to uncover hidden effects of this development and propose how companies can respond to them. The chapter draws on a case study of a Danish industrial e...... of analysis and involving temporal adaptations. In terms of managerial implications, the study provides managers with lessons for designing a robust system of globally dispersed operations.......Companies are actively seeking competitive advantage through their choice of location and ownership of operations. The purpose of this chapter is to uncover hidden effects of this development and propose how companies can respond to them. The chapter draws on a case study of a Danish industrial...... equipment firm and describes how its operations configuration has been changing over time. The chapter identifies the key determinants of this change and uncovers some of its hidden effects. The chapter closes with propositions for how to respond to these effects through the development of a distinct...

  7. Resilient Grid Operational Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Pasqualini, Donatella [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-01

    Extreme weather-related disturbances, such as hurricanes, are a leading cause of grid outages historically. Although physical asset hardening is perhaps the most common way to mitigate the impacts of severe weather, operational strategies may be deployed to limit the extent of societal and economic losses associated with weather-related physical damage.1 The purpose of this study is to examine bulk power-system operational strategies that can be deployed to mitigate the impact of severe weather disruptions caused by hurricanes, thereby increasing grid resilience to maintain continuity of critical infrastructure during extreme weather. To estimate the impacts of resilient grid operational strategies, Los Alamos National Laboratory (LANL) developed a framework for hurricane probabilistic risk analysis (PRA). The probabilistic nature of this framework allows us to estimate the probability distribution of likely impacts, as opposed to the worst-case impacts. The project scope does not include strategies that are not operations related, such as transmission system hardening (e.g., undergrounding, transmission tower reinforcement and substation flood protection) and solutions in the distribution network.

  8. [Lateral epicondylitis: conservative - operative].

    Science.gov (United States)

    Altintas, Burak; Greiner, Stefan

    2016-10-01

    Lateral epicondylitis is a common disease of the common extensor origin at the lateral humerus. Despite its common self-limitation it can lead to chronic therapy-resistant pain with remarkable functional disability of the affected arm. Different conservative and operative treatment options of lateral epicondylitis are described and compared regarding benefits and risks. Additionally, recent surgical techniques and their complications are mentioned. Based on the current literature, it is shown which treatment option can be recommended. This review was based on the literature analysis in PubMed regarding "conservative and operative therapy of lateral epicondylitis" as well as the clinical experience of the authors. Conservative treatment is the primary choice for the treatment of lateral epicondylitis if concomitant pathologies such as instability among others can be excluded. It should include strengthening against resistance with eccentric stretching of the extensor group. In persistent cases, operative treatment is warranted. Resection of the pathologic tissue at the extensor origin with debridement and refixation of the healthy tendinous tissue yields good results. Most patients with lateral epicondylitis can be treated conservatively with success. Radiological evaluation should be performed in therapy-resistant cases. In the case of partial or complete rupture of the extensor origin, operative therapy is indicated.

  9. Operational risk assessment.

    Science.gov (United States)

    McKim, Vicky L

    2017-06-01

    In the world of risk management, which encompasses the business continuity disciplines, many types of risk require evaluation. Financial risk is most often the primary focus, followed by product and market risks. Another critical area, which typically lacks a thorough review or may be overlooked, is operational risk. This category encompasses many risk exposure types including those around building structures and systems, environmental issues, nature, neighbours, clients, regulatory compliance, network, data security and so on. At times, insurance carriers will assess internal hazards, but seldom do these assessments include more than a cursory look at other types of operational risk. In heavily regulated environments, risk assessments are required but may not always include thorough assessments of operational exposures. Vulnerabilities may linger or go unnoticed, only to become the catalyst for a business disruption at a later time, some of which are so severe that business recovery becomes nearly impossible. Businesses may suffer loss of clients as the result of a prolonged disruption of services. Comprehensive operational risk assessments can assist in identifying such vulnerabilities, exposures and threats so that the risk can be minimised or removed. This paper lays out how an assessment of this type can be successfully conducted.

  10. Distributed Operating Systems

    NARCIS (Netherlands)

    Mullender, Sape J.

    1987-01-01

    In the past five years, distributed operating systems research has gone through a consolidation phase. On a large number of design issues there is now considerable consensus between different research groups. In this paper, an overview of recent research in distributed systems is given. In turn, the

  11. Space Operations Learning Center

    Science.gov (United States)

    Lui, Ben; Milner, Barbara; Binebrink, Dan; Kuok, Heng

    2012-01-01

    The Space Operations Learning Center (SOLC) is a tool that provides an online learning environment where students can learn science, technology, engineering, and mathematics (STEM) through a series of training modules. SOLC is also an effective media for NASA to showcase its contributions to the general public. SOLC is a Web-based environment with a learning platform for students to understand STEM through interactive modules in various engineering topics. SOLC is unique in its approach to develop learning materials to teach schoolaged students the basic concepts of space operations. SOLC utilizes the latest Web and software technologies to present this educational content in a fun and engaging way for all grade levels. SOLC uses animations, streaming video, cartoon characters, audio narration, interactive games and more to deliver educational concepts. The Web portal organizes all of these training modules in an easily accessible way for visitors worldwide. SOLC provides multiple training modules on various topics. At the time of this reporting, seven modules have been developed: Space Communication, Flight Dynamics, Information Processing, Mission Operations, Kids Zone 1, Kids Zone 2, and Save The Forest. For the first four modules, each contains three components: Flight Training, Flight License, and Fly It! Kids Zone 1 and 2 include a number of educational videos and games designed specifically for grades K-6. Save The Forest is a space operations mission with four simulations and activities to complete, optimized for new touch screen technology. The Kids Zone 1 module has recently been ported to Facebook to attract wider audience.

  12. South African Airborne Operations

    African Journals Online (AJOL)

    South Africa carried out numerous airborne operations during the latter part .... It was a lesson the French had learned and were learning in Indo-China and ..... South African government, concerned that the conflict would spill across their northern border, ...... the Super Frelon and it was an outstanding helicopter at sea level.

  13. Averaging operations on matrices

    Indian Academy of Sciences (India)

    2014-07-03

    Jul 3, 2014 ... Role of Positive Definite Matrices. • Diffusion Tensor Imaging: 3 × 3 pd matrices model water flow at each voxel of brain scan. • Elasticity: 6 × 6 pd matrices model stress tensors. • Machine Learning: n × n pd matrices occur as kernel matrices. Tanvi Jain. Averaging operations on matrices ...

  14. Almost periodic Schroedinger operators

    International Nuclear Information System (INIS)

    Bellissard, J.; Lima, R.

    1984-01-01

    These lectures are devoted to recent developments in the theory of almost-periodic Schroedinger Operators. We specially describe the algebraic point of view, with applications to gap-labelling theorems. Particular models are also presented which exhibit various spectral properties. (orig.)

  15. Electromagnetically Operated Counter

    Science.gov (United States)

    Goldberg, H D; Goldberg, M I

    1951-12-18

    An electromagnetically operated counter wherein signals to be counted are applied to cause stepwise rotation of a rotatable element which is connected to a suitable register. The mechanism involved consists of a rotatable armature having three spaced cores of magnetic material and a pair of diametrically opposed electromagnets with a suitable pulsing circuit to actuate the magnets.

  16. Dam safety operating guidelines

    International Nuclear Information System (INIS)

    Elsayed, E.; Leung, T.; Kirkham, A.; Lum, D.

    1990-01-01

    As part of Ontario Hydro's dam structure assessment program, the hydraulic design review of several river systems has revealed that many existing dam sites, under current operating procedures, would not have sufficient discharge capacity to pass the Inflow Design Flood (IDF) without compromising the integrity of the associated structures. Typical mitigative measures usually considered in dealing with these dam sites include structural alterations, emergency action plans and/or special operating procedures designed for extreme floods. A pilot study was carried out for the Madawaska River system in eastern Ontario, which has seven Ontario Hydro dam sites in series, to develop and evaluate the effectiveness of the Dam Safety Operating Guidelines (DSOG). The DSOG consist of two components: the flood routing schedules and the minimum discharge schedules, the former of which would apply in the case of severe spring flood conditions when the maximum observed snowpack water content and the forecast rainfall depth exceed threshold values. The flood routing schedules would identify to the operator the optimal timing and/or extent of utilizing the discharge facilities at each dam site to minimize the potential for dam failures cased by overtopping anywhere in the system. It was found that the DSOG reduced the number of structures overtopped during probable maximum flood from thirteen to four, while the number of structures that could fail would be reduced from seven to two. 8 refs., 4 figs., 3 tabs

  17. Operations and Modeling Analysis

    Science.gov (United States)

    Ebeling, Charles

    2005-01-01

    The Reliability and Maintainability Analysis Tool (RMAT) provides NASA the capability to estimate reliability and maintainability (R&M) parameters and operational support requirements for proposed space vehicles based upon relationships established from both aircraft and Shuttle R&M data. RMAT has matured both in its underlying database and in its level of sophistication in extrapolating this historical data to satisfy proposed mission requirements, maintenance concepts and policies, and type of vehicle (i.e. ranging from aircraft like to shuttle like). However, a companion analyses tool, the Logistics Cost Model (LCM) has not reached the same level of maturity as RMAT due, in large part, to nonexistent or outdated cost estimating relationships and underlying cost databases, and it's almost exclusive dependence on Shuttle operations and logistics cost input parameters. As a result, the full capability of the RMAT/LCM suite of analysis tools to take a conceptual vehicle and derive its operations and support requirements along with the resulting operating and support costs has not been realized.

  18. The Operations Process

    Science.gov (United States)

    2010-03-26

    important events receive the most attention. Ensures that absentees and flank units receive changes to the operation order. Transmits changes to them...York: Vintage Books, 1991. Fuller, J. F. C. Generalship: Its Diseases and Their Cure . Harrisburg, PA: Military Service Publishing Co., 1936

  19. Manually operated coded switch

    International Nuclear Information System (INIS)

    Barnette, J.H.

    1978-01-01

    The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made

  20. Operation C O P

    Science.gov (United States)

    Mueck, Robert P.; Parker, Ashley

    2011-01-01

    Sometimes one never knows what sparks an idea or causes people to come together and take something forward. An example of this is Operation COP at the University of Maryland in College Park. Their version of the "See Something, Say Something" campaign is being touted as a crime prevention program, while it is at the same time an…

  1. Invariant differential operators

    CERN Document Server

    Dobrev, Vladimir K

    2016-01-01

    With applications in quantum field theory, elementary particle physics and general relativity, this two-volume work studies invariance of differential operators under Lie algebras, quantum groups, superalgebras including infinite-dimensional cases, Schrödinger algebras, applications to holography. This first volume covers the general aspects of Lie algebras and group theory.

  2. Teachers and Operant Conditioning.

    Science.gov (United States)

    Frey, Sherman

    A survey was conducted of 406 elementary, middle, and secondary school teachers to determine their understanding, acceptance, and use of the principle of operant conditioning. The treatment of data was by percent and chi square analysis primarily according to sex, experience, degree, and position. Subjects reported that a) they believed that the…

  3. Operant Conditioning - Token Economy.

    Science.gov (United States)

    Montgomery, Jacqueline; McBurney, Raymond D.

    Described is an Operant Conditioning-Token Economy Program, teaching patients to be responsible for their own behavior, to make choices, and to be motivated to change. The program was instigated with mentally ill patients in a state hospital and was later used with institutionalized mentally handicapped groups. After two years, only four of the…

  4. Invariant differential operators

    CERN Document Server

    Dobrev, Vladimir K

    With applications in quantum field theory, elementary particle physics and general relativity, this two-volume work studies invariance of differential operators under Lie algebras, quantum groups, superalgebras including infinite-dimensional cases, Schrödinger algebras, applications to holography. This first volume covers the general aspects of Lie algebras and group theory.

  5. Operational Area Environmental Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Bailey-White, Brenda Eileen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nagy, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wagner, Katrina Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Goodman, Thomas Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herring, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Catechis, Christopher S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kinghorn, Aubrianna Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Ellie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Barthel, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Casaus, Benito [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    The Operational Area Environmental Evaluation update provides a description of activities that have the potential to adversely affect natural and cultural resources, including soil, air, water, biological, ecological, and historical resources. The environmental sensitivity of an area is evaluated and summarized, which may facilitate informed management decisions as to where development may be prohibited, restricted, or subject to additional requirements.

  6. International co-operation

    International Nuclear Information System (INIS)

    1998-01-01

    A brief account of activities in international co-operation carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented. Professionality of the Bohunice NPPs staff was highly appreciated by inviting them to be the OSART team members

  7. FFTF operator training

    International Nuclear Information System (INIS)

    1979-01-01

    The qualifications required and the training received by FFTF operators are described. The training includes sodium fill training and cold plant qualification. Requirements for supervisors are also outlined. Arrangement of personnel at FFTF is described. Requalification training and recertification are considered

  8. Marketing co-operatives

    NARCIS (Netherlands)

    G.W.J. Hendrikse (George); C.P. Veerman (Cees)

    2000-01-01

    textabstractMarketing co-operatives (MCs) are analysed from an incomplete contracting perspective. The requirement of the domination of control by the members of a MC is a threat to the survival of a MC in markets where the level of asset specificity at the processing stage of production is

  9. Monitoring of operating processes

    International Nuclear Information System (INIS)

    Barry, R.F.

    1981-01-01

    Apparatus is described for monitoring the processes of a nuclear reactor to detect off-normal operation of any process and for testing the monitoring apparatus. The processes are evaluated by response to their paramters, such as temperature, pressure, etc. The apparatus includes a pair of monitoring paths or signal processing units. Each unit includes facilities for receiving on a time-sharing basis, a status binary word made up of digits each indicating the status of a process, whether normal or off-normal, and test-signal binary words simulating the status binary words. The status words and test words are processed in succession during successive cycles. During each cycle, the two units receive the same status word and the same test word. The test words simulate the status words both when they indicate normal operation and when they indicate off-normal operation. Each signal-processing unit includes a pair of memories. Each memory receives a status word or a test word, as the case may be, and converts the received word into a converted status word or a converted test word. The memories of each monitoring unit operate into a non-coincidence which signals non-coincidence of the converted word out of one memory of a signal-processing unit not identical to the converted word of the other memory of the same unit

  10. Sales and operations planning

    DEFF Research Database (Denmark)

    Kjellsdotter, Linea; Dukovska-Popovska, Iskra; Kaipia, Riikka

    2015-01-01

    This paper investigates sales and operations planning (S&OP) at four Scandinavian industrial food producers in order to explore how the use of S&OP might help leaders to deal with the challenges set by the planning environment. Variables connected to the product and market, e.g., frequency of new...

  11. Sales and operations planning

    DEFF Research Database (Denmark)

    Kjellsdotter, Linea; Dukovska-Popovska, Iskra; Kaipia, Riikka

    2013-01-01

    This paper explores how the use of sales and operations planning (S&OP) may deal with the challenges set by the planning environment by investigating S&OP at four Scandinavian industrial food producers. Variables connected to the product and market, e.g. perishability, customer service elements...

  12. Operational Amplifer Integrator

    NARCIS (Netherlands)

    van Tuijl, Adrianus Johannes Maria

    2003-01-01

    An integrator circuit comprises an operational amplifier which has a transistor stage (1) with an input terminal (4) and an output terminal (3), a feedback capacitor (2) connected between the input terminal (4) and the output terminal (3), and a resistor (5) connected to the input terminal (4), and

  13. On commuting operator exponentials, II

    Indian Academy of Sciences (India)

    where N is an unbounded normal operator and M is a bounded normal operator in the. Hilbert space. Keywords. Self-adjoint and normal operator; commuting normal operator exponent- ials; Borel functional calculus. 1. Introduction. Let E be a complex Hilbert space and let B(E) be the algebra of bounded linear operators.

  14. Effectiveness of operation tools developed by KEKB operators

    International Nuclear Information System (INIS)

    Sugino, K.; Satoh, Y.; Kitabayashi, T.

    2004-01-01

    The main tasks of KEKB (High Energy Accelerator Research Organization B-physics) operators are beam tuning and injection, operation logging, monitoring of accelerator conditions and safety management. New beam tuning methods are frequently applied to KEKB in order to accomplish high luminosity. In such a situation, various operation tools have been developed by the operators to realize efficient operation. In this paper, we describe effectiveness of tools developed by the operators. (author)

  15. PSA in operator training

    International Nuclear Information System (INIS)

    Nos, V.; Faig, J.; Plesa, P.; Delgado, J. L.

    2000-01-01

    The systematic approach to training is internationally accepted as the best method to achieve and maintain the qualification and competence of power plant personnel and to guarantee the quality of their training. Following the recommendations and guidelines of international organisations competent in the field, TECNATOM SA has developed projects based on the systematic approach to training for all Spanish nuclear power plants. One of the latest projects was the systematic approach to training developed for the operation personnel of ASCO Nuclear Power Plant. In this case, certain results of the Probabilistic Safety Analysis (PSA) which complement the systematic safety and reliability criteria of the systematic approach to training process have been incorporated in the traditional processes of work and task analysis and training plan design. This incorporation provides the training manager with additional criteria based not only on safety aspects obtained through the statistical treatment of considerations of skilled technical personnel (operators, operation chief supervisors, etc), but also on the independent criterion of the PSA. The inclusion of this approach basically affects all systematics in two of its stages: During the selection process of operating practices in SMR or SGI, the possible scenarios have been associated with all those situations where human actions which lead to an initiating event or human actions to mitigate an initiating event, may take place, as defined in the PSA. During the scenario development process, the instruments involved in the performance of human actions which originate or mitigate an event taking place have been identified. This pakes it possible to reconcile the scenario event sequence with the sequence considered in the PSA study, as the most likely to provoke a more serious accident. The incorporation of these PSA results contributes to the strengthening of safety aspects in training in an objective way, and confirms that

  16. Cohering power of quantum operations

    Energy Technology Data Exchange (ETDEWEB)

    Bu, Kaifeng, E-mail: bkf@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China); Kumar, Asutosh, E-mail: asukumar@hri.res.in [Harish-Chandra Research Institute, Chhatnag Road, Jhunsi, Allahabad 211019 (India); Homi Bhabha National Institute, Anushaktinagar, Mumbai 400094 (India); Zhang, Lin, E-mail: linyz@zju.edu.cn [Institute of Mathematics, Hangzhou Dianzi University, Hangzhou 310018 (China); Wu, Junde, E-mail: wjd@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China)

    2017-05-18

    Highlights: • Quantum coherence. • Cohering power: production of quantum coherence by quantum operations. • Study of cohering power and generalized cohering power, and their comparison for differentmeasures of quantum coherence. • Operational interpretation of cohering power. • Bound on cohering power of a generic quantum operation. - Abstract: Quantum coherence and entanglement, which play a crucial role in quantum information processing tasks, are usually fragile under decoherence. Therefore, the production of quantum coherence by quantum operations is important to preserve quantum correlations including entanglement. In this paper, we study cohering power–the ability of quantum operations to produce coherence. First, we provide an operational interpretation of cohering power. Then, we decompose a generic quantum operation into three basic operations, namely, unitary, appending and dismissal operations, and show that the cohering power of any quantum operation is upper bounded by the corresponding unitary operation. Furthermore, we compare cohering power and generalized cohering power of quantum operations for different measures of coherence.

  17. Density operators in quantum mechanics

    International Nuclear Information System (INIS)

    Burzynski, A.

    1979-01-01

    A brief discussion and resume of density operator formalism in the way it occurs in modern physics (in quantum optics, quantum statistical physics, quantum theory of radiation) is presented. Particularly we emphasize the projection operator method, application of spectral theorems and superoperators formalism in operator Hilbert spaces (Hilbert-Schmidt type). The paper includes an appendix on direct sums and direct products of spaces and operators, and problems of reducibility for operator class by using the projection operators. (author)

  18. Regulations for RA reactor operation

    International Nuclear Information System (INIS)

    1980-09-01

    Regulations for RA reactor operation are written in accordance with the legal regulations defined by the Law about radiation protection and related legal acts, as well as technical standards according to the IAEA recommendations. The contents of this book include: fundamental data about the reactor; legal regulations for reactor operation; organizational scheme for reactor operation; general and detailed instructions for operation, behaviour in the reactor building, performing experiments; operating rules for operation under steady state and accidental conditions [sr

  19. Weakly compact operators and interpolation

    OpenAIRE

    Maligranda, Lech

    1992-01-01

    The class of weakly compact operators is, as well as the class of compact operators, a fundamental operator ideal. They were investigated strongly in the last twenty years. In this survey, we have collected and ordered some of this (partly very new) knowledge. We have also included some comments, remarks and examples. The class of weakly compact operators is, as well as the class of compact operators, a fundamental operator ideal. They were investigated strongly in the last twenty years. I...

  20. Efficient boiler operations sourcebook

    Energy Technology Data Exchange (ETDEWEB)

    Payne, F.W. (comp.)

    1985-01-01

    This book emphasizes the practical aspects of industrial and commercial boiler operations. It starts with a comprehensive review of general combustion and boiler fundamentals and then deals with specific efficiency improvement methods, and the cost savings which result. The book has the following chapter headings: boiler combustion fundamentals; boiler efficiency goals; major factors controlling boiler efficiency; boiler efficiency calculations; heat loss; graphical solutions; preparation for boiler testing; boiler test procedures; efficiency-related boiler maintenance procedures; boiler tune-up; boiler operational modifications; effect of water side and gas side scale deposits; load management; auxillary equipment to increase boiler efficiency; air preheaters and economizers; other types of auxillary equipment; combustion control systems and instrumentation; boiler O/sub 2/ trim controls; should you purchase a new boiler.; financial evaluation procedures; case studies. The last chapter includes a case study of a boiler burning pulverized coal and a case study of stoker-fired coal.

  1. Ship operations report, 1973

    International Nuclear Information System (INIS)

    1973-01-01

    The NOAA Fleet Operations Report 1973 was developed to provide a summary of project accomplishments during calendar year 1973. The report was prepared from season, cruise and special reports submitted by ships of the fleet. Centralized management of the NOAA Fleet was finalized by changing the operational control of the National Marine Fisheries Service (NMFS) Ships DAVID STARR JORDAN (FRS 44), TOWNSEND CROMWELL (FRS 43) and MURRE II (FRV 63) from NMFS to the National Ocean Survey on July 1, 1973. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

  2. ATLAS IBL operational experience

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00237659; The ATLAS collaboration

    2017-01-01

    The Insertable B-Layer (IBL) is the inner most pixel layer in the ATLAS experiment, which was installed at 3.3 cm radius from the beam axis in 2014 to improve the tracking performance. To cope with the high radiation and hit occupancy due to proximity to the interaction point, a new read-out chip and two different silicon sensor technologies (planar and 3D) have been developed for the IBL. After the long shut-down period over 2013 and 2014, the ATLAS experiment started data-taking in May 2015 for Run-2 of the Large Hadron Collider (LHC). The IBL has been operated successfully since the beginning of Run-2 and shows excellent performance with the low dead module fraction, high data-taking efficiency and improved tracking capability. The experience and challenges in the operation of the IBL is described as well as its performance.

  3. Tevatron lower temperature operation

    International Nuclear Information System (INIS)

    Theilacker, J.C.

    1994-07-01

    This year saw the completion of three accelerator improvement projects (AIP) and two capital equipment projects pertaining to the Tevatron cryogenic system. The projects result in the ability to operate the Tevatron at lower temperature, and thus higher energy. Each project improves a subsystem by expanding capabilities (refrigerator controls), ensuring reliability (valve box, subatmospheric hardware, and compressor D), or enhancing performance (cold compressors and coldbox II). In January of 1994, the Tevatron operated at an energy of 975 GeV for the first time. This was the culmination, of many years of R ampersand D, power testing in a sector (one sixth) of the Tevatron, and final system installation during the summer of 1993. Although this is a modest increase in energy, the discovery potential for the Top quark is considerably improved

  4. Train operation in emergencies

    CERN Document Server

    Jia, Limin; Qin, Yong

    2017-01-01

    This book presents the latest findings on train operation theories and methods in the context of emergencies. It examines and assesses a range of aspects—including the definition of a railway emergency, transport organization modes in emergencies, calculating railway transport capacity in emergencies, line planning in emergencies, train re-pathing in emergencies and train re-scheduling in emergencies—that are urgently needed in the railway transportation field, which faces the serious challenge of dealing with emergencies worldwide. The book highlights the latest research results in an integrated and systematic way, and the methodology presented is oriented on real-world problems, allowing it to be used not only directly in railway operational management, but also as the point of departure for further applications or theoretical research. As such, the book will be of considerable interest to graduate students and researchers in the field of traffic and transportation engineering.>.

  5. SAGD operating strategies

    Energy Technology Data Exchange (ETDEWEB)

    Nasr, T. N.; Golbeck, H.; Korpany, G.; Pierce, G. [Alberta Research Council, Edmonton, AB (Canada)

    1998-12-31

    Steam-assisted gravity drainage (SAGD) has become one of the most effective means of recovering oil from oil sands deposits that are too deeply buried for surface mining. In general terms, the process involves drilling paired horizontal wells, one well above the other, and separated by a distance, near the bottom of the oil-bearing formation. The top well is used to inject the steam, heating up the oil and allowing it to drain under the action of gravity, into the bottom well. This paper reviews advances in SAGD operating strategies, based on work at the Underground Test Facility (UTF) in Alberta. Problems that continue to challenge researchers and operators, and concepts to overcome these challenges are discussed in terms of laboratory studies at UTF, designed to improve SAGD oil-to-steam ratios and to reduce water requirements for the process. 8 refs., 20 figs.

  6. Financing Canadian international operations

    International Nuclear Information System (INIS)

    Beagle, G.

    1996-01-01

    A primer on financing international operations by Canadian corporations was provided. Factors affecting the availability to project finance (location, political risk), the various forms of financing (debt, equity, and combinations), the main sources of government backed financing to corporations (the International Finance Corporation) (IFC), the European Bank for Reconstruction and Development (EBRD), the Asian Development Bank (ADB), the Overseas Property Insurance Corporation (OPIC), government or agency guarantees, political risk coverage, the use of offshore financial centres, and the where, when and how these various organizations operate, were reviewed. Examples of all of the above, taken from the experiences of Canadian Occidental Petroleum of Calgary in the U.S., in South America, in the Middle and Far East, and in Kazakhstan, were used as illustrations. figs

  7. Economical motor transport operations

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, P

    1979-09-01

    Motor transport is one area in a company where energy conservation is a function primarily of operative education and motivation rather than mechanical or technical control and monitoring. Unless the driver wants to save energy by proper operation of the vehicle, there is nothing the company can do to force him, whatever equipment it fits to the vehicles, or incentives it offers. This article gives an overview of the use of energy in road transport and examines a number of actions that can be taken to conserve energy. It discusses the question of the cost-effectiveness of transport energy conservation in the light of the complex issues involved. The problems and opportunities of implementing energy-saving programs are examined. (MCW)

  8. Operational and environmental safety

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The responsibility of the DOE Office of Operational and Environmental Safety is to assure that DOE-controlled activities are conducted in a manner that will minimize risks to the public and employees and will provide protection for property and the environment. The program supports the various energy technologies by identifying and resolving safety problems; developing and issuing safety policies, standards, and criteria; assuring compliance with DOE, Federal, and state safety regulations; and establishing procedures for reporting and investigating accidents in DOE operations. Guidelines for the radiation protection of personnel; radiation monitoring at nuclear facilities; an assessment of criticality accidents by fault tree analysis; and the preparation of environmental, safety, and health standards applicable to geothermal energy development are discussed

  9. Hurricane slams gulf operations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that reports of damage by Hurricane Andrew escalated last week as operators stepped up inspections of oil and gas installations in the Gulf of Mexico. By midweek, companies operating in the gulf and South Louisiana were beginning to agree that earlier assessments of damage only scratched the surface. Damage reports included scores of lost, toppled, or crippled platforms, pipeline ruptures, and oil slicks. By midweek the U.S. coast Guard had received reports of 79 oil spills. Even platforms capable of resuming production in some instances were begin curtailed because of damaged pipelines. Offshore service companies the another 2-4 weeks could be needed to fully assess Andrew's wrath. Lack of personnel and equipment was slowing damage assessment and repair

  10. 8. The operational processes.

    Science.gov (United States)

    2014-05-01

    There are two principal directions that disaster studies pursue: (1) interventional; and (2) noninterventional. Interventional studies are used to evaluate specific responses as to their effectiveness in meeting their respective objectives, their contribution to the overarching goal, the efficiency with which they are able to achieve their objectives, other effects created, and their respective costs. On the other hand, noninterventional studies examine the epidemiology of disasters and for the most part are observational. Both interventional and noninterventional studies require data/information obtained from assessments. This section of these Guidelines examines the operational framework used to study interventions/responses and includes the following processes: (1) assessments, (2) identification of needs; (3) strategic planning; (4) selection of intervention(s); (5) operational planning; (6) execution of interventions; and (7) monitoring and evaluation of effects and changes in levels of functions resulting from the intervention(s) being studied.

  11. Airline Operations Aid

    Science.gov (United States)

    1993-01-01

    C Language Integrated Production System (CLIPS), a NASA-developed expert systems program, is used by American Airlines for three purposes: as a rapid prototyping tool; to develop production prototypes; and to develop production application. An example of the latter is CLIPS' use in "Hub S1AAshing," a knowledge based system that recommends contingency plans when severe schedule reductions must be made. Hub S1AAshing has replaced a manual, labor intensive process. It saves time and allows Operations Control Coordinators to handle more difficult situations. Because the system assimilates much of the information necessary to facilitate educated decision making, it minimizes negative impact in situations where it is impossible to operate all flights.

  12. Operation Unified Protector

    DEFF Research Database (Denmark)

    Buhl, Kenneth Øhlenschlæger

    2012-01-01

    Formålet med denne artikel er at se nærmere på erfaringerne fra den maritime kampagne under den militære indsats i konflikten i Libyen i 2011, som i NATO regi blev kendt som Operation Unified Protector (OUP). Dækningen i de danske medier fokuserede primært på luftkampagnen, hvilket må tilskrives,...

  13. Preparation to exceptional operations

    International Nuclear Information System (INIS)

    Sort, M.

    1984-01-01

    Preparation to special maintenance operations requires a specific approach according to the considered intervention type. Replacement of vapor generators is representative of a kind of intervention where technics is generally only an adaptation to the power plant context of processes already in application in construction, and where methodology, planning and organization have an important role because of the variety and the quantity of taskworks to be done, the involved manpower, the dosimetry and time lag requirements [fr

  14. Nuclear operations dictionary

    International Nuclear Information System (INIS)

    1990-01-01

    In less than fifty years, a sophisticated technical language has developed worldwide around broad-ranging operations in the field of nuclear technology. In South Africa the need to adapt this new technical language in an orderly and acceptable manner for common use was identified. The aim of this dictionary is to promote the use of correct nuclear technology in both English and Afrikaans, and to aid in the translation of nuclear terms from English into Afrikaans

  15. Nuclear operations dictionary

    International Nuclear Information System (INIS)

    1990-01-01

    In less than fifty years, a sophisticated technical language has developed worldwide around broad-ranging operations in the field of nuclear technology. In South Africa the need to adapt this new technical language in an orderly and acceptable manner for common use was identified. The aim of this dictionary is to promote the use of correct nuclear terminology in both Afrikaans and English, and to aid in the translation of nuclear terms from Afrikaans into English

  16. SAF line powder operations

    International Nuclear Information System (INIS)

    Frederickson, J.R.; Horgos, R.M.

    1983-10-01

    An automated nuclear fuel fabrication line is being designed for installation in the Fuels and Materials Examination Facility (FMEF) near Richland, Washington. The fabrication line will consist of seven major process systems: Receiving and Powder Preparation; Powder Conditioning; Pressing and Boat Loading; Debinding, Sintering, and Property Adjustment; Boat Transport; Pellet Inspection and Finishing; and Pin Operations. Fuel powder processing through pellet pressing will be discussed in this paper

  17. Pressurised water reactor operation

    International Nuclear Information System (INIS)

    Birnie, S.; Lamonby, J.K.

    1987-01-01

    The operation of a pressurized water reactor (PWR) is described with respect to the procedure for a unit start-up. The systems details and numerical data are for a four loop PWR station of the design proposed for Sizewell-'B', United Kingdom. A description is given of: the initial conditions, filling the reactor coolant system (RCS), heat-up and pressurisation of the RCS, secondary system preparations, reactor start-up, and reactivity control at power. (UK)

  18. Operational electricity transmission rates

    International Nuclear Information System (INIS)

    Roggen, M.

    1997-01-01

    In a liberalized electricity market both the consumers and the producers of electricity must pay for the use of the power transmission network. Thus, the net manager has unlimited options to realize efficiency improvements. A neutral and transparent management of the power grid is necessary to avoid disturbance of the market. KEMA Consulting translated abstract ideas and strategic advices to operational concepts in its report 'A framework for the determination of tariffs of the transport in the Dutch electricity sector'

  19. Operational Shock Complexity Theory

    Science.gov (United States)

    2005-05-26

    Theory : Recommendations For The National Strategy To Defeat Terrorism.” Student Issue Paper, Center for Strategic Leadership , US Army War College, July...Lens of Complexity Theory : Recommendations For The National Strategy To Defeat Terrorism.” (Student Issue Paper, Center for Strategic Leadership , US...planners managed to cause confusion in the enemy’s internal model by operating in an unexpected manner. 140 Glenn E. James, “Chaos Theory : The

  20. Rotorwash Operational Footprint Modeling

    Science.gov (United States)

    2014-07-01

    I-13. Francis, J. K., and Gillespie, A., “Relating Gust Speed to Tree Damage in Hurricane Hugo , 1989,” Journal of Arboriculture, November 1993...statement has been Rotorwash Operational Footprint Modeling 72 found to be correct. In many parts of the United States, the requirements for hurricane ...On August 18, 1983, Hurricane Alicia struck downtown Houston, Texas. Researchers were allowed into downtown Houston the following day to help survey

  1. ELIXIR Handbook of Operations

    OpenAIRE

    Niklas Blomberg; Martin Cook; Pablo Roman Garcia; Stephanie Suhr; Premysl Velek; Montserrat Gonzalez; Susanna Repo

    2017-01-01

    ELIXIR is a distributed infrastructure, built around existing centres of excellence throughout the European member states represented through national Nodes, and incorporating the internationally supported European Bioinformatics Institute (EMBL-EBI). There are currently over 160 institutes from 20 member states taking part in ELIXIR. Operating a large, distributed, ‘virtual’ organisation such as ELIXIR requires strong coordination capabilities with clear roles and effective and simple proces...

  2. Magnetically operated check valve

    Science.gov (United States)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1994-06-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  3. Education Payload Operation - Demonstrations

    Science.gov (United States)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Demonstrations (EPO-Demos) are recorded video education demonstrations performed on the International Space Station (ISS) by crewmembers using hardware already onboard the ISS. EPO-Demos are videotaped, edited, and used to enhance existing NASA education resources and programs for educators and students in grades K-12. EPO-Demos are designed to support the NASA mission to inspire the next generation of explorers.

  4. Energy operations policy

    International Nuclear Information System (INIS)

    1993-01-01

    It is reported that energy policy was designed following the European Bank for Reconstruction and Development review of the most pressing energy issues confronting Central and Eastern Europe and the republics of the former Soviet Union. The main features of the policy described in the document set the general framework for the Bank's energy operations. Energy strategies for particular countries are designed as an integral part of the Bank's individual country strategies. Tabs

  5. Peri-operative care.

    Science.gov (United States)

    Baston, Helen

    2004-05-01

    This is the third 'midwifery basics' series aimed at student midwives, and focuses on midwifery care during labour. This article provides a summary of peri-operative care for women who experience caesarean birth. Students are encouraged to seek further information through a series of activities, and to link theory with practice by considering the issues relating to the care of the woman described in the short vignette.

  6. Operator ordering and causality

    OpenAIRE

    Plimak, L. I.; Stenholm, S. T.

    2011-01-01

    It is shown that causality violations [M. de Haan, Physica 132A, 375, 397 (1985)], emerging when the conventional definition of the time-normal operator ordering [P.L.Kelley and W.H.Kleiner, Phys.Rev. 136, A316 (1964)] is taken outside the rotating wave approximation, disappear when the amended definition [L.P. and S.S., Annals of Physics, 323, 1989 (2008)] of this ordering is used.

  7. Oscillators and operational amplifiers

    OpenAIRE

    Lindberg, Erik

    2005-01-01

    A generalized approach to the design of oscillators using operational amplifiers as active elements is presented. A piecewise-linear model of the amplifier is used so that it make sense to investigate the eigenvalues of the Jacobian of the differential equations. The characteristic equation of the general circuit is derived. The dynamic nonlinear transfer characteristic of the amplifier is investigated. Examples of negative resistance oscillators are discussed.

  8. FFTF operational experience

    International Nuclear Information System (INIS)

    Newland, D.J.; Krupar, J.J.

    1984-01-01

    In April 1982, the FFTF began its first nominally 100 day irradiation cycle. Since that time the plant has operated very well with steadily increasing plant capacity factors during its first four cycles. One hundred fifty fuel assemblies (eighty of which are experiments) and over 32,000 individual fuel pins have been irradiated, some in excess of 100 MWd/Kg burnup. Specialized equipment and systems unique to sodium cooled reactor plants have performed well

  9. Gaussian operations and privacy

    International Nuclear Information System (INIS)

    Navascues, Miguel; Acin, Antonio

    2005-01-01

    We consider the possibilities offered by Gaussian states and operations for two honest parties, Alice and Bob, to obtain privacy against a third eavesdropping party, Eve. We first extend the security analysis of the protocol proposed in [Navascues et al. Phys. Rev. Lett. 94, 010502 (2005)]. Then, we prove that a generalized version of this protocol does not allow one to distill a secret key out of bound entangled Gaussian states

  10. On Major Naval Operations

    Science.gov (United States)

    2007-01-01

    operation were to take Turkey out of the war, open a direct link with the Entente’s embattled ally Russia, force the Ger- mans to shift troops from the...heavy losses. By August 1915, the allied forces amounted to twelve divisions. A new landing was conducted in early August at Suvla Bay aimed to link ...lethal weapons, such as antiship missiles and tor- pedoes , and the nature of the physical environment. Here again, combat be- tween modern naval forces

  11. 2015 Special Operations Essays

    Science.gov (United States)

    2015-05-01

    this emerging technology, but how to operate within it as well. Figure 1. Egypt population pyramid . Source: United States Census Bureau...vital during events in Egypt in 2011. In comparing the 100 days it took to overthrow the Shah in the 1979 Iranian Revolution to the 18 days in which the...Figure 1, which is expected to continue to be seen in Egypt over the next several decades.12 The popularity of social media within this demographic was

  12. Targets of operation monitoring

    International Nuclear Information System (INIS)

    Wenger, H.

    1997-01-01

    The condition monitoring system of a nuclear power plant should be an assurance for the user and the authorities that the safety of the installation constantly corresponds to the nominal condition. As soon as deviations from these conditions occur, it should quickly provide fundamentals for corrective measures. It contributes to a high degree of availability of the installation and makes safe and economical operation throughout the whole life of the installation possible. (author) 1 fig

  13. Reactor operation method

    International Nuclear Information System (INIS)

    Osumi, Katsumi; Miki, Minoru.

    1979-01-01

    Purpose: To prevent stress corrosion cracks by decreasing the dissolved oxygen and hydrogen peroxide concentrations in the coolants within a reactor container upon transient operation such as at the start-up or shutdown of bwr type reactors. Method: After a condensate has been evacuated, deaeration operation is conducted while opening a main steam drain line, as well as a main steam separation valve and a by-pass valve in a turbine by-pass line connecting the main steam line and the condenser without by way of a turbine, and the reactor is started-up by the extraction of control rods after the concentration of dissolved oxygen in the cooling water within a pressure vessel has been decreased below a predetermined value. Nuclear heating is started after the reactor water has been increased to about 150 0 C by pump heating after the end of the deaeration operation for preventing the concentration of hydrogen peroxide and oxygen in the reactor water from temporarily increasing immediately after the start-up. The corrosive atmosphere in the reactor vessel can thus be moderated. (Horiuchi, T.)

  14. Operating experience in reprocessing

    International Nuclear Information System (INIS)

    Schueller, W.

    1983-01-01

    Since 1953, reprocessing has accumulated 180 years of operating experience in ten plants, six of them with 41 years of operation in reprocessing oxide fuel from light water reactors. After abortive, premature attempts at what is called commercial reprocessing, which had been oriented towards the market value of recoverable uranium and plutonium, non-military reprocessing technologies have proved their technical feasibility, since 1966 on a pilot scale and since 1976 on an industrial scale. Reprocessing experience obtained on uranium metal fuel with low and medium burnups can now certainly be extrapolated to oxide fuel with high burnup and from pilot plants to industrial scale plants using the same technologies. The perspectives of waste management of the nuclear power plants operated in the Federal Republic of Germany should be viewed realistically. The technical problems still to be solved are in a balanced relationship to the benefit arising to the national economy out of nuclear power generation and can be solved in time, provided there are clearcut political boundary conditions. (orig.) [de

  15. ILC Operating Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Barklow, T.; Brau, J.; Fujii, K.; Gao, J.; List, J.; Walker, N.; Yokoya, K.; Collaboration: ILC Parameters Joint Working Group

    2015-06-15

    The ILC Technical Design Report documents the design for the construction of a linear collider which can be operated at energies up to 500 GeV. This report summarizes the outcome of a study of possible running scenarios, including a realistic estimate of the real time accumulation of integrated luminosity based on ramp-up and upgrade processes. The evolution of the physics outcomes is emphasized, including running initially at 500 GeV, then at 350 GeV and 250 GeV. The running scenarios have been chosen to optimize the Higgs precision measurements and top physics while searching for evidence for signals beyond the standard model, including dark matter. In addition to the certain precision physics on the Higgs and top that is the main focus of this study, there are scientific motivations that indicate the possibility for discoveries of new particles in the upcoming operations of the LHC or the early operation of the ILC. Follow-up studies of such discoveries could alter the plan for the centre-of-mass collision energy of the ILC and expand the scientific impact of the ILC physics program. It is envisioned that a decision on a possible energy upgrade would be taken near the end of the twenty year period considered in this report.

  16. Disc operational system

    International Nuclear Information System (INIS)

    Veretenov, V.Yu.; Volkov, A.I.; Gurevich, M.I.; Kozik, V.S.; Pod'yachev, E.I.; Shapiro, M.L.

    1974-01-01

    A disc operational system is proposed, which is based on the file structure and designed for use in a BESM-6 computer with the software system comprising a dispatcher DD-73 and a monitor 'Dubna'. The main distinguishing feature of the disc operational system is the decentralization of the file system. Each disc package is an independent file unaffected by the state of the other disc packages. The use of several disc packages is allowed. The above feature of the disc operational system makes it possible to simplify the language of communication with the system, to give the user the opportunity of controlling the file quite independently, and to simplify the maintenance of the discs by the computer personnel. One and the same disc can be simultaneously addressed by all problems in the processor (both mathematical and service). A single file, however, may be used in the recording mode by only one problem. The description presented is the instruction for users. It also describes special possibilities open to the system programmers [ru

  17. CH Packaging Operations Manual

    International Nuclear Information System (INIS)

    2008-01-01

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing 'Short' 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing 'Tall' 85-gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing SWB Payload Assembly; and 1.7, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence.

  18. CH Packaging Operations Manual

    International Nuclear Information System (INIS)

    2009-01-01

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing 'Short' 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing 'Tall' 85-Gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing Shielded Container Payload Assembly; 1.7, Preparing SWB Payload Assembly; and 1.8, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence, except as noted.

  19. Operational health physics training

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-06-01

    The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of {alpha}, {beta}, {gamma}, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised to reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included.

  20. CH Packaging Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-05-27

    This document provides the user with instructions for assembling a payload. All the steps in Subsections 1.2, Preparing 55-Gallon Drum Payload Assembly; 1.3, Preparing "Short" 85-Gallon Drum Payload Assembly (TRUPACT-II and HalfPACT); 1.4, Preparing "Tall" 85-Gallon Drum Payload Assembly (HalfPACT only); 1.5, Preparing 100-Gallon Drum Payload Assembly; 1.6, Preparing Shielded Container Payload Assembly; 1.7, Preparing SWB Payload Assembly; and 1.8, Preparing TDOP Payload Assembly, must be completed, but may be performed in any order as long as radiological control steps are not bypassed. Transport trailer operations, package loading and unloading from transport trailers, hoisting and rigging activities such as ACGLF operations, equipment checkout and shutdown, and component inspection activities must be performed, but may be performed in any order and in parallel with other activities as long as radiological control steps are not bypassed. Steps involving OCA/ICV lid removal/installation and payload removal/loading may be performed in parallel if there are multiple operators working on the same packaging. Steps involving removal/installation of OCV/ICV upper and lower main O-rings must be performed in sequence, except as noted.

  1. Reactor operation method

    International Nuclear Information System (INIS)

    Suzuki, Toshio; Hida, Kazuki; Yoshioka, Ritsuo.

    1990-01-01

    The enrichment degree of fuels initially loaded in a reactor core was made extremely lower than that of fresh fuels to be loaded in the succeeding cycle, or the enrichment degree for all of the initially loaded fuels was made identical with that of the fresh fuels in the conventional reactor operation method. In this operation method, since the initially loaded fuels are sometimes taken out after the completion of the cycle at the low burnup degree as it is, it can not be said to reduce the fuel cycle cost. As a means for dissolving this problem, at least two different kinds of initially loaded fuels are prepared. The enrichment degree of the highly enriched fuels is made identical with that of the fresh fuels, and the enrichment degree and the number of low enriched fuels are not changed after the completion of the first cycle but they are operated till the end of the second cycle. Further, all of the fuels at the low enrichment degree are taken out after the completion of the second cycle and exchanged with the fresh fuels. As a result, high burnup ratio of the initially loaded fuels can be increased, to improve the fuel economy. (I.S.)

  2. Operation and development 1999

    International Nuclear Information System (INIS)

    2001-01-01

    This issue of the Technical Report on the Accelerators describes the operations for physics experiments and beam tests, various technical improvements and ongoing projects during the year 1999. As usual, the first chapter reports on the standard operation of GANIL with stable ions, with analysis of the beam time distribution and statistics, including failures. A major project was the production and subsequent acceleration, over a long period of time, of an intense 58 Ni 11+ beam produced using the MIVOC method, which contributed strongly to the discovery of the doubly-magic 48 Ni element. The renovation and development program (Chapter 2), including methods for producing metallic ion beams, gathered speed thanks to the completion of SPIRAL. A large share of these projects were high-intensity oriented. This trend also obviously applies to projects directly linked to the THI operation. In a special test, a 1.3 x 10 13 pps 13 C beam (later raised to 2 x 10 13 pps for several hours) was accelerated and extracted from SSC2 at an energy of 75 MeV/n. Simultaneously, comparisons were made between simulations and beam test results for a clearer understanding of space charge effects on accelerator transmission efficiency. Chapter 3 covers the THI related projects. The final chapter deals with IRRSUD. This project, which is funded and on the way to completion, uses low energy beams delivered by the two injector cyclotrons for industrial applications and research, such as nano-technologies and simulation of defects in solids. (author)

  3. Waste Management Operations Program

    International Nuclear Information System (INIS)

    Sease, J.D.

    1983-01-01

    The major function of the Program is to operate the Laboratory's systems and facilities for collecting and disposing of radioactive gaseous, liquid, and solid wastes. This includes collection and shallow land burial of about 2000 m 3 of β-γ contaminated waste and retrievable storage of about 60 m 3 of transuranium contaminated waste annually; ion-exchange treatment and release to the environment of about 450 x 10 3 m 3 of slightly contaminated water; volume reduction by evaporation of about 5000 m 3 of intermediate-level liquid waste followed by hydrofracture injection of the concentrate; and scrubbing and/or filtration of the gases from radioactive operations prior to release to the atmosphere. In addition, this year disposal of about 350,000 gal of radioactive sludge from the old (no longer in service) gunite tanks began. Operations are in conformance with rules and regulations presently applicable to ORNL. This Program is responsible for planning and for development activities for upgrading the facilities, equipment, and procedures for waste disposal to ensure ORNL work incorporates the latest technology. Major (line-item) new facilities are provided as well as substantial (GPP) upgrading of old facilities. These activities as well as the technical and engineering support to handle them are discussed

  4. Operational health physics training

    International Nuclear Information System (INIS)

    1988-09-01

    The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of α, β, γ, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised to reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included

  5. Review of operational aids for nuclear plant operators

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1983-01-01

    Many approaches are being explored to improve the safety of nuclear plant operations. One approach is to supply high-quality, relevant information by means of computer-based diagnostic systems to assist plant operators in performing their operational and safety-related roles. The evaluation of operational aids to ensure safe plant operations is a necessary function of NRC. This work has two purposes: to collect limited data on a diversity of operational aids, and to provide a method for evaluating the safety implications of the functions of proposed operational aids. After a discussion of the method evaluation now under study, this paper outlines this data collection to date

  6. Does Operational Risk Disclosure Quality Increase Operating Cash Flows?

    Directory of Open Access Journals (Sweden)

    Haitham Nobanee

    2017-12-01

    Full Text Available This study aims to measure the degree of operational risk disclosure and examine its impact on operating cash flow of banks listed on the UAE Abu Dhabi Stock Exchange (ADX and Dubai Financial Market (DFM during the period 2003-2016. The authors conducted content analysis of the annual reports to measure the degree of operational risk disclosure. In addition, they used dynamic panel data regressions to analyze the impact of operational risk disclosure on the operating cash flow generated by the banks. The results show a low degree of operational risk disclosure for all UAE banks, both Islamic and conventional. In addition, the results show no association between the levels of disclosure of operational risk and cash flow for all banks, conventional and Islamic. Operational risk disclosure of Islamic banks has not been examined by any prior researchers. In addition, this paper examines the potential impact of operational risk disclosure on the operating cash flow generated by the banks.

  7. Reactor core operation management system

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Tomomi.

    1992-05-28

    Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.).

  8. Reactor core operation management system

    International Nuclear Information System (INIS)

    Sato, Tomomi.

    1992-01-01

    Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.)

  9. CMS analysis operations

    International Nuclear Information System (INIS)

    Andreeva, J; Maier, G; Spiga, D; Calloni, M; Colling, D; Fanzago, F; D'Hondt, J; Maes, J; Van Mulders, P; Villella, I; Klem, J; Letts, J; Padhi, S; Sarkar, S

    2010-01-01

    During normal data taking CMS expects to support potentially as many as 2000 analysis users. Since the beginning of 2008 there have been more than 800 individuals who submitted a remote analysis job to the CMS computing infrastructure. The bulk of these users will be supported at the over 40 CMS Tier-2 centres. Supporting a globally distributed community of users on a globally distributed set of computing clusters is a task that requires reconsidering the normal methods of user support for Analysis Operations. In 2008 CMS formed an Analysis Support Task Force in preparation for large-scale physics analysis activities. The charge of the task force was to evaluate the available support tools, the user support techniques, and the direct feedback of users with the goal of improving the success rate and user experience when utilizing the distributed computing environment. The task force determined the tools needed to assess and reduce the number of non-zero exit code applications submitted through the grid interfaces and worked with the CMS experiment dashboard developers to obtain the necessary information to quickly and proactively identify issues with user jobs and data sets hosted at various sites. Results of the analysis group surveys were compiled. Reference platforms for testing and debugging problems were established in various geographic regions. The task force also assessed the resources needed to make the transition to a permanent Analysis Operations task. In this presentation the results of the task force will be discussed as well as the CMS Analysis Operations plans for the start of data taking.

  10. Categorizing operational radioactive wastes

    International Nuclear Information System (INIS)

    2007-04-01

    The primary objective of this publication is to improve communications among waste management professionals and Member States relative to the properties and status of radioactive waste. This is accomplished by providing a standardized approach to operational waste categorization using accepted industry practices and experience. It is a secondary objective to draw a distinction between operational waste categorization and waste disposal classification. The approach set forth herein is applicable to waste generation by mature (major, advanced) nuclear programmes, small-to-medium sized nuclear programmes, and programmes with waste from other nuclear applications. It can be used for planning, developing or revising categorization methodologies. For existing categorization programmes, the approach set forth in this publication may be used as a validation and evaluation tool for assessing communication effectiveness among affected organizations or nations. This publication is intended for use by waste management professionals responsible for creating, implementing or communicating effective categorization, processing and disposal strategies. For the users of this publication, it is important to remember that waste categorization is a communication tool. As such, the operational waste categories are not suitable for regulatory purposes nor for use in health and safety evaluations. Following Section 1 (Introduction) Section 2 of this publication defines categorization and its relationship to existing waste classification and management standards, regulations and practices. It also describes the benefits of a comprehensive categorization programme and fundamental record considerations. Section 3 provides an overview of the categorization process, including primary categories and sub-categories. Sections 4 and 5 outline the specific methodology for categorizing unconditioned and conditioned wastes. Finally, Section 6 provides a brief summary of critical considerations that

  11. Operator algebras and topology

    International Nuclear Information System (INIS)

    Schick, T.

    2002-01-01

    These notes, based on three lectures on operator algebras and topology at the 'School on High Dimensional Manifold Theory' at the ICTP in Trieste, introduce a new set of tools to high dimensional manifold theory, namely techniques coming from the theory of operator algebras, in particular C*-algebras. These are extensively studied in their own right. We will focus on the basic definitions and properties, and on their relevance to the geometry and topology of manifolds. A central pillar of work in the theory of C*-algebras is the Baum-Connes conjecture. This is an isomorphism conjecture, as discussed in the talks of Luck, but with a certain special flavor. Nevertheless, it has important direct applications to the topology of manifolds, it implies e.g. the Novikov conjecture. In the first chapter, the Baum-Connes conjecture will be explained and put into our context. Another application of the Baum-Connes conjecture is to the positive scalar curvature question. This will be discussed by Stephan Stolz. It implies the so-called 'stable Gromov-Lawson-Rosenberg conjecture'. The unstable version of this conjecture said that, given a closed spin manifold M, a certain obstruction, living in a certain (topological) K-theory group, vanishes if and only M admits a Riemannian metric with positive scalar curvature. It turns out that this is wrong, and counterexamples will be presented in the second chapter. The third chapter introduces another set of invariants, also using operator algebra techniques, namely L 2 -cohomology, L 2 -Betti numbers and other L 2 -invariants. These invariants, their basic properties, and the central questions about them, are introduced in the third chapter. (author)

  12. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  13. Operation and development 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This issue of the Technical Report on the Accelerators describes the operations for physics experiments and beam tests, various technical improvements and ongoing projects during the year 1999. As usual, the first chapter reports on the standard operation of GANIL with stable ions, with analysis of the beam time distribution and statistics, including failures. A major project was the production and subsequent acceleration, over a long period of time, of an intense {sub 58}Ni{sup 11+} beam produced using the MIVOC method, which contributed strongly to the discovery of the doubly-magic {sub 48}Ni element. The renovation and development program (Chapter 2), including methods for producing metallic ion beams, gathered speed thanks to the completion of SPIRAL. A large share of these projects were high-intensity oriented. This trend also obviously applies to projects directly linked to the THI operation. In a special test, a 1.3 x 10{sup 13} pps {sub 13}C beam (later raised to 2 x 10{sup 13} pps for several hours) was accelerated and extracted from SSC2 at an energy of 75 MeV/n. Simultaneously, comparisons were made between simulations and beam test results for a clearer understanding of space charge effects on accelerator transmission efficiency. Chapter 3 covers the THI related projects. The final chapter deals with IRRSUD. This project, which is funded and on the way to completion, uses low energy beams delivered by the two injector cyclotrons for industrial applications and research, such as nano-technologies and simulation of defects in solids. (author)

  14. Dukovany NPP operation

    International Nuclear Information System (INIS)

    Vlcek, Jaroslav

    2010-01-01

    The topics discussed include: Dukovany NPP among CEZ Group power plants; International missions at the plant; Plant operation results; and Strategic goals and challenges. Historical data are presented in the graphical form, such as the unit capacity factor, unplanned capability loss factor, unplanned automatic scrams, fuel reliability, industrial safety accident rate, collective radiation exposure, WANO index, power generation data, and maximum achievable power by the end of year. Also discussed were the company culture and human resources, maintenance, power uprate, and related phenomena. (P.A.)

  15. Playing in Operations Management

    Directory of Open Access Journals (Sweden)

    Laura Guitart-Tarrés

    2017-06-01

    Full Text Available The current model of competency-based learning requires new tools that allow students to develop these competencies and become active subjects of their learning (rather than passive receivers of a contents. Gamification or ludification is becoming an innovative trend in many areas, also in higher education. Games can provide a useful environment for students to acquire professional skills, a fact that is much more difficult to acquire through traditional learning methods. In that sense, this paper presents the experience of designing a game for Operations Management students.

  16. Revamping Spacecraft Operational Intelligence

    Science.gov (United States)

    Hwang, Victor

    2012-01-01

    The EPOXI flight mission has been testing a new commercial system, Splunk, which employs data mining techniques to organize and present spacecraft telemetry data in a high-level manner. By abstracting away data-source specific details, Splunk unifies arbitrary data formats into one uniform system. This not only reduces the time and effort for retrieving relevant data, but it also increases operational visibility by allowing a spacecraft team to correlate data across many different sources. Splunk's scalable architecture coupled with its graphing modules also provide a solid toolset for generating data visualizations and building real-time applications such as browser-based telemetry displays.

  17. Operation SANDSTONE: 1948

    Science.gov (United States)

    1983-12-19

    8217qOKINWOTME X_ ENJEBI LR UNU/ MIJ!KADREK P, 1BOKOLU BO) KENE LAB .-. •ELLE ,AEJ • LUJORS• I i F L E 149N" YOKE (49 KT). TOWVER I,. L QJWA% ALIE’.I t...MSRB-60 12 Cy ATTN: DD Merchant Marine Academy Field Comand ATTN: Director of Libraries Defense iuclear Agency Naval Historical Center ATTN: FCLS, MAJ...Judge Adv Gen ATTN: OMA, DP-22 ATTN: Code 73 Nevada Operations Office U.S. Merchant Marine Academy ATTN: Health Physics Div ATTN: Librarian 2 cy ATTN: R

  18. Nuclear reactor operator licensing

    International Nuclear Information System (INIS)

    Bursey, R.J.

    1978-01-01

    The Atomic Energy Act of 1954, which was amended in 1974 by the Energy Reorganization Act, established the requirement that individuals who had the responsibility of operating the reactors in nuclear power plants must be licensed. Section 107 of the act states ''the Commission shall (1) prescribe uniform conditions for licensing individuals; (2) determine the qualifications of such individuals; and (3) issue licenses to such individuals in such form as the Commission may prescribe.'' The article discusses the types of licenses, the selection and training of individuals, and the administration of the Nuclear Regulatory Commission licensing examinations

  19. A science of operations

    CERN Document Server

    Priestley, Mark

    2011-01-01

    Today, computers fulfil a dazzling array of roles, a flexibility resulting from the great range of programs that can be run on them. A Science of Operations examines the history of what we now call programming, defined not simply as computer programming, but more broadly as the definition of the steps involved in computations and other information-processing activities. This unique perspective highlights how the history of programming is distinct from the history of the computer, despite the close relationship between the two in the 20th century. The book also discusses how the development of

  20. Operation for ensidig recurrensparese

    DEFF Research Database (Denmark)

    Melchiors, Jacob; Rasmussen, Niels

    2009-01-01

    INTRODUCTION: Medialisation surgery for unilateral recurrent nerve paralysis has been performed for the past 100 years to improve voice quality. The aim of this paper is to describe our surgical methods and evaluate the results using subjective and objective parameters with an emphasis on acoustic...... voice analysis. MATERIAL AND METHODS: Retrospective cohort study of 42 consecutively operated patients from 1996 to 2006. Twenty-eight patients were treated with a hydroxyapatite prosthesis, which was inserted into the larynx (VoCom), nine patients had a silicone bead oil injected into the paretic vocal...

  1. Conceptualizing operations strategy processes

    DEFF Research Database (Denmark)

    Rytter, Niels Gorm; Boer, Harry; Koch, Christian

    2007-01-01

    Purpose - The purpose of this paper is to present insights into operations strategy (OS) in practice. It outlines a conceptualization and model of OS processes and, based on findings from an in-depth and longitudinal case study, contributes to further development of extant OS models and methods......; taking place in five dimensions of change - technical-rational, cultural, political, project management, and facilitation; and typically unfolding as a sequential and parallel, ordered and disordered, planned and emergent as well as top-down and bottom-up process. The proposed OS conceptualization...

  2. Meteorology in site operations

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    During the site selection and design phases of a plant, meteorological assistance must be based on past records, usually accumulated at stations not actually on the site. These preliminary atadvices will be averages and extremes that might be expected. After a location has been chosen and work has begun, current and forecast weather conditions become of immediate concern. On-site meteorological observations and forecasts have many applications to the operating program of an atomic energy site. Requirements may range from observations of the daily minimum temperatures to forecasts of radiation dosages from airborne clouds

  3. GMRES and integral operators

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, C.T.; Xue, Z.Q. [North Carolina State Univ., Raleigh, NC (United States)

    1994-12-31

    Many discretizations of integral equations and compact fixed point problems are collectively compact and strongly convergent in spaces of continuous functions. These properties not only lead to stable and convergent approximations but also can be used in the construction of fast multilevel algorithms. Recently the GMRES algorithm has become a standard coarse mesh solver. The purpose of this paper is to show how the special properties of integral operators and their approximations are reflected in the performance of the GMRES iteration and how these properties can be used to strengthen the norm in which convergence takes place. The authors illustrate these ideas with composite Gauss rules for integral equations on the unit interval.

  4. Efficiency of PRECIS Role Operators.

    Science.gov (United States)

    Mahapatra, M.; Biswas, S. C.

    1984-01-01

    Describes research which measured the efficiency of role operators through frequency of appearances in PRECIS input strings for 200 abstracts related to taxation, genetic psychology, and Shakespearian drama. Frequencies of appearance of major categories of role operators, role operators in different subjects, individual main line operators, and…

  5. Space shuttle operations integration plan

    Science.gov (United States)

    1975-01-01

    The Operations Integration Plan is presented, which is to provide functional definition of the activities necessary to develop and integrate shuttle operating plans and facilities to support flight, flight control, and operations. It identifies the major tasks, the organizations responsible, their interrelationships, the sequence of activities and interfaces, and the resultant products related to operations integration.

  6. Characteristics and modeling of spruce wood under dynamic compression load; Charakteristik und Modellierung von Fichtenholz unter dynamischer Druckbelastung

    Energy Technology Data Exchange (ETDEWEB)

    Eisenacher, Germar

    2014-01-28

    Spruce wood is frequently used as an energy absorbing material in impact limiters of packages for the transportation of radioactive material. A 9m drop test onto an unyielding target is mandatory for the packages. The impact results in a dynamic compression load of the spruce wood inside the impact limiter. The lateral dilation of the wood is restrained thereby due to encasing steel sheets. This work's objective was to provide a material model for spruce wood based on experimental investigations to enable the calculation of such loading conditions. About 600 crush tests with cubical spruce wood specimens were performed to characterize the material. The compression was up to 70% and the material was assumed to be transversely isotropic. Particularly the lateral constraint showed to have an important effect: the material develops a high lateral dilation without lateral constraint. The force-displacement characteristics show a comparably low force level and no or only slight hardening. Distinctive softening occurs after the linear-elastic region when loaded parallel to the fiber. On the other hand, using a lateral constraint results in significantly higher general force levels, distinctive hardening and lateral forces. The softening effect when loaded parallel to the fiber is less distinctive. Strain rate and temperature raise or lower the strength level, which was quantified for the applicable ranges of impact limiters. The hypothesis of an uncoupled evolution of the yield surface was proposed based on the experimental findings. It postulates an independent strength evolution with deviatoric and volumetric deformation. The hypothesis could be established using the first modeling approach, the modified LS-DYNA material model MAT075. A transversely isotropic material model was developed based thereupon and implemented in LS-DYNA. The material characteristics of spruce wood were considered using a multi-surface yield criterion and a non-associated flow rule. The yield criterion uses linear interpolation of the strength of constrained and unconstrained spruce wood. Thus multiaxial stress states can be considered. The calculation of the crush tests showed the ability of the model to reproduce the basic strength characteristics of spruce wood. The effect of lateral constraint can be reproduced well due to the uncoupled evolution of the yield surface. On the contrary, the strength is overestimated for load under acute angles, which could be prevented using modified yield surfaces. The effects of strain rate and temperature are generally reproduced well but the scaling factors used should be improved. The calculation of a drop test with a test-package equipped with wood-filled impact limiters confi rmed the model's performance and produced feasible results. However, to create a verified impact limiter model further numerical and experimental investigations are necessary. This work makes an important contribution to the numerical stress analysis in the context of safety cases of transport packages.

  7. Palliatieve sedatie in Nederlandse huisartspraktijken: dynamische cohortstudie van trends en redenen in de periode 2005-2011.

    NARCIS (Netherlands)

    Donker, G.A.; Slotman, F.G.; Spreeuwenberg, P.; Francke, A.L.

    2014-01-01

    Objective: To gain more insight into the trends of and reasons for palliative sedation in Dutch general practice. Design: Dynamic cohort study using registrations and questionnaire data of Dutch GPs. Method: Data collected in the years from 2005 until 2011 in the Dutch Sentinel General Practice

  8. Core Animation für Mac OS X und iPhone Eindrucksvolle dynamische User Interfaces erstellen

    CERN Document Server

    Dudney, Bill

    2009-01-01

    Core Animation wurde mit Mac OS X 10.5 eingeführt und bietet dem Entwickler hervorragende Möglichkeiten, auf einfache Weise animierte User Interfaces für den Mac und das iPhone zu erstellen. Bill Dudney gibt Ihnen in diesem Buch eine umfassende Einführung in Core Animation. In den ersten Kapiteln liegt der Schwerpunkt auf der Nutzung der Integration von Core Animation mit dem AppKit. Der Autor beginnt mit den vertrauten Möglichkeiten aus dem AppKit sowie der Beschreibung der Möglichkeiten, die Cocoa-APIs bieten, und führt langsam die zusätzlichen APIs ein, die zum Core-Animation-Framework gehören. Es werden Ihnen u.a. die verschiedenen Animationsarten vorgestellt, die Core Animation zur Verfügung stellt, sowie die Klassen, die das Timing von Animationen regeln. In den späteren Kapiteln geht es dann hauptsächlich um die Aspekte, die mit einer rein Core-Animation-basierten Benutzerschnittstelle realisiert werden können. Der Autor erläutert Ihnen die Arbeitsweise von Layers sowie deren Geometrie un...

  9. Dynamisch cloudsourcen van bedrijfsprocessen, gebruik van business rules management bij transitie en exit van BPO uit de cloud

    NARCIS (Netherlands)

    Rudolf Liefers; Jeroen van Grondelle; Johan Versendaal

    2015-01-01

    Dit artikel beschrijft een onderzoek waarbij gekeken is naar mogelijkheden die Business Rules Management-concepten bieden bij het aanbieden van bedrijfsprocessen as a service via een cloud-dienst. BRM helpt bedrijven door het gestructureerd vastleggen van organisatorische keuzes en regels waaraan

  10. Dynamic loads caused by pressure blasts, steam explosions, and earth quakes; Dynamische Belastungen durch Druckstoesse, Dampfexplosionen und Erdbeben

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, H H [SDK Ingenieurunternehmen GmbH, Basel (Switzerland)

    1998-11-01

    The paper deals with description of structures and the relevant dynamic loads. As to the structures, gas, fluid, or solid structures are to be considered. They determine the characteristic vibrational behaviour of the structures in the interconnected system. The excitation type determines the component that will be induced to change characteristic vibrational behaviour of the structure, depending on the load increasing time and the period of excitation. Three examples are given to illustrate the processes. (Water tank subject to quasi-seismic conditions; pipeline affected by blow-down; shut-off valve for a pipe). (orig./CB) [Deutsch] In diesem Beitrag soll auf die Erfassung der Strukturen und die Erfassung der dynamischen Belastungen eingegangen werden. Zur Erfassung der Strukturen sind `Gas-, Fluid- und Festkoerper-Strukturen` zu beachten. Sie bestimmen das Eigenschwingverhalten im Verbund. Die Erregung bestimmt nun, welcher Bereich aus dem Eigen-Schwingverhalten der Struktur ueber die Lastanstiegs-Zeit und die Zeitdauer der Erregung anregbar ist. Drei Beispiele sollen die Aufgabenstellung erlaeutern (Wasserbehaelter unter erdbebenaehnlichen Bedingungen; Rohrleitung unter `Blow-down-Belastung`; Absperrklappe fuer eine Rohrleitung). (orig./MM)

  11. Wood as a raw commodity and energy carrier; Holz als Rohstoff und Energietraeger. Dynamisches Holzmarktmodell und Zukunftsszenarien - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pauli, B.; Buergi, P.; Bruehlhard, S. [Schweizerische Hochschule fuer Landwirtschaft, Zollikofen (Switzerland); Thees, O.; Lemm, R.; Rosset, Ch. [Eidg. Forschungsanstalt fuer Wald, Schnee und Landschaft, WSL, Birmensdorf (Switzerland)

    2010-05-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at a dynamic wood-market model and the future prospects for the use of wood as a raw commodity and energy carrier. As an introduction, an overview of Swiss and international wood markets is provided. Various sorts of timber - from whole tree-trunks to waste wood for use as an energy source - are discussed. The international wood market is looked at and future developments are discussed. The report goes on to deal with four project stages which help provide an information basis in order to be able to review the current situation and the future developments in the Swiss wood industry. The first stage of the project involved the elaboration of a material-flow matrix for the year 2005. The sources of the data are discussed. Inconsistencies in the data are looked at and the Swiss wood market is analysed. This material-flow matrix provided the basis for a second step, the development of a product-oriented, dynamic wood market model. Here, all sources of wood from forests to waste wood are looked at and their use for building and as an energy resource is considered. Model development, variants and modelling factors are discussed. An expert-aided model is looked at. The market models developed were used for the third step, the development of scenarios for future development. Five scenarios were developed, including higher energy costs, a large, heavy storm event, increased per capita wood use, increasing global timber prices as well as the installation of a new, large-scale sawmill. In a final step, based on knowledge gained from the previous steps, suggestions for further action to be taken by politics were elaborated. Here, measures that would have an effect on supply and demand are suggested that could help decrease the costs for the harvesting of wood resources and support changes in the market behaviour of forest owners.

  12. Statistical-dynamic climate forecast for Europe and Germany. Final report; Statistisch-dynamische Klimavorhersage fuer Europa und Deutschland. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Denhard, M.; Schoenwiese, C.D.

    2001-07-01

    Principal Correlation Pattern Analysis (PCPA) maps the local circulation, temperature and precipitation anomalies in the northern hemisphere in monthly resolution and permits an interpretation of their causes. Calculations are made for the El Nino phenomenon, NAO, and the quasi-11-year cycle of solar radiation variation. Especially the El Nino calculations show the efficiency of PCPA. [German] Mit Hilfe der Principal Correlation Pattern Analysis (PCPA) koennen die von verschiedenen Klimaantrieben erzeugten lokalen Zirkulations-, Temperatur- und Niederschlagsanomalien auf der Nordhemisphaere in monatlicher Aufloesung dargestellt und ursaechlich interpretiert werden. Diese Rechnungen wurden fuer das El Nino Phaenomen, die NAO und den quasi 11-jaehrigen Zyklus der solaren Strahlungsschwankungen durchgefuehrt. Insbesondere die Untersuchungen zu Wirkungen von El Nino auf Europa zeigen, dass die PCPA die Kopplungen eines Prozesses mit dem Klimasystem sehr genau beschreibt und somit die Voraussetzungen schafft, die Wirkungen dieses Klimaantriebs zu modellieren und ihn zur Vorhersage zu nutzen. Erste einfache Vorhersageexperimente fuer das europaeische Klima bestaetigen diese Aussage. (orig.)

  13. Advanced Neutron Source operating philosophy

    International Nuclear Information System (INIS)

    Houser, M.M.

    1993-01-01

    An operating philosophy and operations cost estimate were prepared to support the Conceptual Design Report for the Advanced Neutron Source (ANS), a new research reactor planned for the Oak Ridge National Laboratory (ORNL). The operating philosophy was part of the initial effort of the ANS Human Factors Program, was integrated into the conceptual design, and addressed operational issues such as remote vs local operation; control room layout and responsibility issues; role of the operator; simulation and training; staffing levels; and plant computer systems. This paper will report on the overall plans and purpose for the operations work, the results of the work done for conceptual design, and plans for future effort

  14. TFTR initial operations

    International Nuclear Information System (INIS)

    Young, K.M.; Bell, M.; Blanchard, W.R.

    1984-01-01

    TFTR (Tokamak Fusion Test Reactor) has operated since December 1982 with ohmically heated plasmas. Routine operation with feedback control of plasma current, position and density has been obtained for plasmas with Isub(p) approx.= 800 kA, a = 68 cm, R = 250 cm, and Bsub(t) = 27 kG. A maximum plasma current of 1 MA was achieved with q approx.= 2.5. Energy confinement times of approx. 150 msec were measured for hydrogen and deuterium plasmas with n-barsub(e) approx.= 2 x 10 13 cm -3 , Tsub(e)(O) approx.= 1.5 keV, Tsub(i)(O) approx.= 1.5 keV and Zsub(eff) approx.= 3. The preliminary results suggest a size-cubed scaling from PLT, and are consistent with Alcator C scaling where tau approx. nR 2 a. Initial measurements of plasma disruption characteristics indicate current decay rates of approx. 800 kA in 8 ms which is within the TFTR design requirement of 3 MA in 3 ms. (author)

  15. ATLAS solenoid operates underground

    CERN Multimedia

    2006-01-01

    A new phase for the ATLAS collaboration started with the first operation of a completed sub-system: the Central Solenoid. Teams monitoring the cooling and powering of the ATLAS solenoid in the control room. The solenoid was cooled down to 4.5 K from 17 to 23 May. The first current was established the same evening that the solenoid became cold and superconductive. 'This makes the ATLAS Central Solenoid the very first cold and superconducting magnet to be operated in the LHC underground areas!', said Takahiko Kondo, professor at KEK. Though the current was limited to 1 kA, the cool-down and powering of the solenoid was a major milestone for all of the control, cryogenic, power and vacuum systems-a milestone reached by the hard work and many long evenings invested by various teams from ATLAS, all of CERN's departments and several large and small companies. Since the Central Solenoid and the barrel liquid argon (LAr) calorimeter share the same cryostat vacuum vessel, this achievement was only possible in perfe...

  16. Elementary Thermal Operations

    DEFF Research Database (Denmark)

    Lostaglio, Matteo; Alhambra, Álvaro M.; Perry, Christopher

    2018-01-01

    To what extent do thermodynamic resource theories capture physically relevant constraints? Inspired by quantum computation, we define a set of elementary thermodynamic gates that only act on 2 energy levels of a system at a time. We show that this theory is well reproduced by a Jaynes-Cummings in......To what extent do thermodynamic resource theories capture physically relevant constraints? Inspired by quantum computation, we define a set of elementary thermodynamic gates that only act on 2 energy levels of a system at a time. We show that this theory is well reproduced by a Jaynes......-Cummings interaction in rotating wave approximation and draw a connection to standard descriptions of thermalisation. We then prove that elementary thermal operations present tighter constraints on the allowed transformations than thermal operations. Mathematically, this illustrates the failure at finite temperature...... to do so, including necessary and sufficient conditions for a given change of the population to be possible. As an example, we describe the resource theory of the Jaynes-Cummings model. Finally, we initiate an investigation into how our resource theories can be applied to Heat Bath Algorithmic Cooling...

  17. Operations dashboard: comparative study

    Science.gov (United States)

    Ramly, Noor Nashriq; Ismail, Ahmad Zuhairi; Aziz, Mohd Haris; Ahmad, Nurul Haszeli

    2011-10-01

    In this present days and age, there are increasing needs for companies to monitor application and infrastructure health. Apart from having proactive measures to secure their application and infrastructure, many see monitoring dashboards as crucial investment in disaster preparedness. As companies struggle to find the best solution to cater for their needs and interest for monitoring their application and infrastructure's health, this paper summarizes the studies made on several known off-the-shelf operations dashboard and in-house developed dashboard. A few criteria of good dashboard are collected from previous studies carried out by several researchers and rank them according to importance and business needs. The finalized criteria that will be discussed in later sections are data visualization, performance indicator, dashboard personalization, audit capability and alert/ notification. Comparative studies between several popular dashboards were then carried out to determine whether they met these criteria that we derived from the first exercise. The findings hopefully can be used to educate and provide an overview of selecting the best IT application and infrastructure operations dashboard that suit business needs, thus become the main contribution of this paper.

  18. TFTR initial operations

    International Nuclear Information System (INIS)

    Young, K.M.; Bell, M.; Blanchard, W.R.

    1983-11-01

    The Tokamak Fusion Test Reactor (TFTR) has operated since December 1982 with ohmically heated plasmas. Routine operation with feedback control of plasma current, position, and density has been obtained for plasmas with I/sub p/ approx. = 800 kA, a = 68 cm, R = 250 cm, and B/sub t/ = 27 kG. A maximum plasma current of 1 MA was achieved with q approx. = 2.5. Energy confinement times of approx. 150 msec were measured for hydrogen and deuterium plasmas with anti n/sub e/ approx. = 2 x 10 13 cm -3 , T/sub e/ (0) approx. = 1.5 keV, T/sub i/ (0) approx. = 1.5 keV, and Z/sub eff/ approx. = 3. The preliminary results suggest a size-cubed scaling from PLT and are consistent with Alcator C scaling where tau approx. nR 2 a. Initial measurements of plasma disruption characteristics indicate current decay rates of approx. 800 kA in 8 ms which is within the TFTR design requirement of 3 MA in 3 ms

  19. Distributed Operations Planning

    Science.gov (United States)

    Fox, Jason; Norris, Jeffrey; Powell, Mark; Rabe, Kenneth; Shams, Khawaja

    2007-01-01

    Maestro software provides a secure and distributed mission planning system for long-term missions in general, and the Mars Exploration Rover Mission (MER) specifically. Maestro, the successor to the Science Activity Planner, has a heavy emphasis on portability and distributed operations, and requires no data replication or expensive hardware, instead relying on a set of services functioning on JPL institutional servers. Maestro works on most current computers with network connections, including laptops. When browsing down-link data from a spacecraft, Maestro functions similarly to being on a Web browser. After authenticating the user, it connects to a database server to query an index of data products. It then contacts a Web server to download and display the actual data products. The software also includes collaboration support based upon a highly reliable messaging system. Modifications made to targets in one instance are quickly and securely transmitted to other instances of Maestro. The back end that has been developed for Maestro could benefit many future missions by reducing the cost of centralized operations system architecture.

  20. Reactor operation monitor

    International Nuclear Information System (INIS)

    Sakagami, Masaharu.

    1982-01-01

    Purpose: To improve the working performance of a reactor by extending the range for the power conditioning due to the control rod operation and flow rate control. Constitution: The results of calculations for the power distribution and the burn-up degree distribution of the reactor core from a reactor performance computer that processes each of measuring signals in a nuclear power plant are used as the inputs for a computing device of the fuel rod power hysteresis to form the power hysteresis for each of the fuel rods up to the present time. The data are used as the inputs for the computing device of the fuel rod performance index, and the fuel rod performance index representing the critical values for the stresses in the fuel rod cladding tubes and the critical values for the duration of the stresses determined from the power hysteresis and the burn-up degree of the fuel rod are calculated for each of the fuel rods. Accordingly, the power conditioning can be carried out upon power-up in the reactor while monitoring the fuel rod performance index f(t) for each of the fuel assemblies, whereby the range for the power conditioning due to the control rod operation and the flow rate control can be extended relative to fuel assemblies in which f(t) is smaller than 1. (Yoshino, Y.)

  1. Operating experience at CEBAF

    International Nuclear Information System (INIS)

    Legg, R.

    1996-01-01

    CEBAF, the Continuous Electron Beam Accelerator Facility, is a 5-pass, recirculating, superconducting rf linac designed to provide exceptional beam quality at 4 GeV up to 200 μA CW. It is made up of an injector, two 400-MeV linacs, and 9 recirculation arcs having a total beamline length of more than 4.5 km. On Nov. 5, 1995, CEBAF delivered a 4 GeV, 25-μA CW electron beam to the first of 3 experimental halls and the experimental physics program was started 10 days later. Accelerator availability during the first month of the experimental run exceeded 75%. Beam properties measured in the experimental hall to date are a one sigma momentum spread of 5x10 -5 and an rms emittance of 0.2 nanometer-radians, better than design specification. CW beam has been provided from all 5 passes at 800 MeV intervals. Outstanding performance of the superconducting linacs suggests a machine energy upgrade to 6 GeV in the near term with eventual machine operation at 8-10 GeV. Results from commissioning and operations experience since the last conference are presented

  2. Planck-suppressed operators

    International Nuclear Information System (INIS)

    Assassi, Valentin; Baumann, Daniel; Green, Daniel; McAllister, Liam

    2014-01-01

    We show that the recent Planck limits on primordial non-Gaussianity impose strong constraints on light hidden sector fields coupled to the inflaton via operators suppressed by a high mass scale Λ. We study a simple effective field theory in which a hidden sector field is coupled to a shift-symmetric inflaton via arbitrary operators up to dimension five. Self-interactions in the hidden sector lead to non-Gaussianity in the curvature perturbations. To be consistent with the Planck limit on local non-Gaussianity, the coupling to any hidden sector with light fields and natural cubic couplings must be suppressed by a very high scale Λ > 10 5 H. Even if the hidden sector has Gaussian correlations, nonlinearities in the mixing with the inflaton still lead to non-Gaussian curvature perturbations. In this case, the non-Gaussianity is of the equilateral or orthogonal type, and the Planck data requires Λ > 10 2 H

  3. Access control system operation

    International Nuclear Information System (INIS)

    Barnes, L.D.

    1981-06-01

    An automated method for the control and monitoring of personnel movement throughout the site was developed under contract to the Department of Energy by Allied-General Nuclear Services (AGNS) at the Barnwell Nuclear Fuel Plant (BNFP). These automated features provide strict enforcement of personnel access policy without routine patrol officer involvement. Identification methods include identification by employee ID number, identification by voice verification and identification by physical security officer verification. The ability to grant each level of access authority is distributed over the organization to prevent any single individual at any level in the organization from being capable of issuing an authorization for entry into sensitive areas. Each access event is recorded. As access events occur, the inventory of both the entered and the exited control area is updated so that a current inventory is always available for display. The system has been operated since 1979 in a development mode and many revisions have been implemented in hardware and software as areas were added to the system. Recent changes have involved the installation of backup systems and other features required to achieve a high reliability. The access control system and recent operating experience are described

  4. Prevalence of operator fatigue in winter maintenance operations.

    Science.gov (United States)

    Camden, Matthew C; Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Bryce, James; Flintsch, Gerardo; Hanowski, Richard J

    2018-02-02

    Similar to commercial motor vehicle drivers, winter maintenance operators are likely to be at an increased risk of becoming fatigued while driving due to long, inconsistent shifts, environmental stressors, and limited opportunities for sleep. Despite this risk, there is little research concerning the prevalence of winter maintenance operator fatigue during winter emergencies. The purpose of this research was to investigate the prevalence, sources, and countermeasures of fatigue in winter maintenance operations. Questionnaires from 1043 winter maintenance operators and 453 managers were received from 29 Clear Road member states. Results confirmed that fatigue was prevalent in winter maintenance operations. Over 70% of the operators and managers believed that fatigue has a moderate to significant impact on winter maintenance operations. Approximately 75% of winter maintenance operators reported to at least sometimes drive while fatigued, and 96% of managers believed their winter maintenance operators drove while fatigued at least some of the time. Furthermore, winter maintenance operators and managers identified fatigue countermeasures and sources of fatigue related to winter maintenance equipment. However, the countermeasures believed to be the most effective at reducing fatigue during winter emergencies (i.e., naps) were underutilized. For example, winter maintenance operators reported to never use naps to eliminate fatigue. These results indicated winter maintenance operations are impacted by operator fatigue. These results support the increased need for research and effective countermeasures targeting winter maintenance operator fatigue. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Compton Operator in Quantum Electrodynamics

    International Nuclear Information System (INIS)

    Garcia, Hector Luna; Garcia, Luz Maria

    2015-01-01

    In the frame in the quantum electrodynamics exist four basic operators; the electron self-energy, vacuum polarization, vertex correction, and the Compton operator. The first three operators are very important by its relation with renormalized and Ward identity. However, the Compton operator has equal importance, but without divergence, and little attention has been given it. We have calculated the Compton operator and obtained the closed expression for it in the frame of dimensionally continuous integration and hypergeometric functions

  6. Space Station Freedom operations costs

    Science.gov (United States)

    Accola, Anne L.; Williams, Gregory J.

    1988-01-01

    Measures to reduce the operation costs of the Space Station which can be implemented in the design and development stages are discussed. Operational functions are described in the context of an overall operations concept. The provisions for operations cost responsibilities among the partners in the Space Station program are presented. Cost estimating methodologies and the way in which operations costs affect the design and development process are examined.

  7. Fundamental studies on the switching in liquid nitrogen environment using vacuum switches for application in future high-temperature superconducting medium-voltage power grids; Grundsatzuntersuchungen zum Schalten in Fluessigstickstoff-Umgebung mit Vakuumschaltern zur Anwendung in zukuenftigen Hochtemperatur-Supraleitungs-Mittelspannungsnetzen

    Energy Technology Data Exchange (ETDEWEB)

    Golde, Karsten

    2016-06-24

    By means of superconducting equipment it is possible to reduce the transmission losses in distribution networks while increasing the transmission capacity. As a result even saving a superimposed voltage level would be possible, which can put higher investment costs compared to conventional equipment into perspective. For operation of superconducting systems it is necessary to integrate all equipment in the cooling circuit. This also includes switchgears. Due to cooling with liquid nitrogen, however, only vacuum switching technology comes into question. Thus, the suitability of vacuum switches is investigated in this work. For this purpose the mechanics of the interrupters is considered first. Material investigations and switching experiments at ambient temperature and in liquid nitrogen supply information on potential issues. For this purpose, a special pneumatic construction is designed, which allows tens of thousands of switching cycles. Furthermore, the electrical resistance of the interrupters is considered. Since the contact system consists almost exclusively of copper, a remaining residual resistance and appropriate thermal losses must be considered. Since they have to be cooled back, an appropriate evaluation is given taking environmental parameters into account. The dielectric strength of vacuum interrupters is considered both at ambient temperature as well as directly in liquid nitrogen. For this purpose different contact distances are set at different interrupter types. A distinction is made between internal and external dielectric strength. Conditioning and deconditioning effects are minimized by an appropriate choice of the test circuit. The current chopping and resulting overvoltages are considered to be one of the few drawbacks of vacuum switching technology. Using a practical test circuit the height of chopping current is determined and compared for different temperatures. Due to strong scattering the evaluation is done using statistical methods. At

  8. Pyrolaser Operating System

    Science.gov (United States)

    Roberts, Floyd E., III

    1994-01-01

    Software provides for control and acquisition of data from optical pyrometer. There are six individual programs in PYROLASER package. Provides quick and easy way to set up, control, and program standard Pyrolaser. Temperature and emisivity measurements either collected as if Pyrolaser in manual operating mode or displayed on real-time strip charts and stored in standard spreadsheet format for posttest analysis. Shell supplied to allow macros, which are test-specific, added to system easily. Written using Labview software for use on Macintosh-series computers running System 6.0.3 or later, Sun Sparc-series computers running Open-Windows 3.0 or MIT's X Window System (X11R4 or X11R5), and IBM PC or compatible computers running Microsoft Windows 3.1 or later.

  9. KEPLER SCIENCE OPERATIONS

    International Nuclear Information System (INIS)

    Haas, Michael R.; Bryson, Steve T.; Dotson, Jessie L.; Koch, David G.; Smith, Marcie; Sobeck, Charles K.; Batalha, Natalie M.; Caldwell, Douglas A.; Jenkins, Jon M.; Van Cleve, Jeffrey E.; Hall, Jennifer; Klaus, Todd C.; Middour, Chris; Thompson, Richard S.; Kolodziejczak, Jeffrey; Stober, Jeremy

    2010-01-01

    Kepler's mission design includes a comprehensive plan for commissioning and science operations. The commissioning phase completed all critical tasks and accomplished all mission objectives within a week of the pre-launch plan. Since the start of science data collection, the nominal timeline has been interrupted by two safe-mode events, several losses of fine point, and some small pointing adjustments. The most important anomalies are understood and mitigated, so Kepler's technical performance has improved significantly over this period, and the prognosis for mission success is excellent. The Kepler data archive is established and hosting data for the science team, guest observers, and the public. The first data to become publicly available include the monthly full-frame images and the light curves for targets that are dropped from the exoplanet program or released after publication. Data are placed in the archive on a quarterly basis; the Kepler Results Catalog will be released annually starting in 2011.

  10. Ship operations report, 1975

    International Nuclear Information System (INIS)

    1976-01-01

    The NOAA Ship Operations Report 1975 was developed to provide a summary of projects undertaken during calendar year 1975. The report was prepared from season, cruise and special reports submitted by ships of the fleet. This report is promulgated for inhouse dissemination in the National Oceanic and Atmospheric Administration, for collaborating and interested agencies, and for use by members of the scientific community. Throughout the year, ships routinely collected and transmitted weather data. Similarly, as NOAA participants in the Integrated Global Ocean Station System (IGOSS) service program, XBT observations were taken and either radioed or submitted in log form via mail. In addition, particulate and radionuclide samples were taken in cooperation with the Atomic Energy Commission, sediment samples were obtained for the Smithsonian Institution and observations were made of marine mammals

  11. Managing operational paradoxes

    International Nuclear Information System (INIS)

    Olson, J.; Baker, K.; Thurber, J.

    1992-01-01

    The economic, regulatory, and social environment of commercial nuclear power has changed dramatically in the last 10 yr. In addition to the increased regulatory pressure resulting from the Three Mile Island incident and other factors, nuclear utilities have experienced increasing financial pressure from state public utility commissions and investors. To successfully manage nuclear power plants in today's environment requires different skills and strategies than were required 10 yr ago. External pressures on the utility and plant organization have created a series of operational paradoxes unmatched in the history of commercial nuclear power. This paper is based on a synthesis of findings and observations from a series of studies conducted by the authors over the past 10 yr. The authors identify a series of specific paradoxes facing managers of nuclear power plants and suggest several strategies for managing these paradoxes

  12. FRMAC Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  13. Evolution of operations culture

    International Nuclear Information System (INIS)

    Gould, D.

    2008-01-01

    Over the last 3 decades there have been many changes in the operating culture of nuclear power plants. One of the main thrusts of these changes has been to move away from an early model where there was heavy reliance on trained and experienced personnel with free reign to do the right thing, towards a newer model relying on strict adherence to prescribed procedures and processes. This paper will discuss how some of these changes have taken place and briefly consider at what point the correct balance between these models is achieved. This paper is based solely on the experience of the author who has spent twenty years as a licensed control room supervisor. The reader may view this paper as more of an opinion piece than a typical scientific paper. (author)

  14. Enhancing operational nuclear safety

    International Nuclear Information System (INIS)

    Sengoku, Katsuhisa

    2008-01-01

    's safety standards and program which provides the safety objective following the 10 fundamental safety principles. The safety requirements defines the functional conditions required for safety and the safety guides provides user-friendly and up-to-date practical guidance representing good/best practices to fulfill the requirements. The IAEA provides safety review services and fields safety review teams upon request of member states for the regulatory, the International Regulatory Review Team (IRRT) and Operational Safety Review Team (OSART) and Peer Review of the Operational and Safety Performance Experience Review (PROSPER). The OSART programme's purpose is to assist member states in enhancing the operational safety of individual nuclear power plants and to promote the continuous development of operational safety within all member states by the dissemination of information on good practice. The OSART Mission Results (OSMIR) database contains the results from 73 OSART missions and 54 follow up visits from 1991 and its continually updated. The Asian Nuclear Safety Network (ANSN) was established to pool and share existing and new technical knowledge and practical experience to further improve the safety of nuclear installation in Asia. In summary, the enhancement of the GNSR is anchored in the recognition that all the states are in the same boat and the increasing importance of sharing and mutual learning, sharing knowledge and experience through regional and global networking. It requires joint and coordinated strategy by all states. The IAEA is willing and ready to support the GNSR through the establishment and application of safety standards, and safety review and advisory services and international instruments. (Author)

  15. Wind turbine operated sailboat

    Energy Technology Data Exchange (ETDEWEB)

    Hall, R.

    1990-07-31

    A wind powered boat is disclosed which incorporates a vertical axis rotary turbine. A shaft portion extends downwardly from the turbine to a water pump, with the boat being provided with a forwardly opening inlet and a rearwardly opening outlet from the water pump. When rotating, the turbine operates the pump by the shaft to draw in water through the inlet, thereby creating a low pressure area in front of the boat, and to force the water out through the outlet for propelling the boat. In a preferred embodiment, the boat has a catamaran construction or is a large ocean going vessel with enough width to provide a buffer to either side of the turbine, and the turbine is the Darrieus rotor type. The pump is a standard centrifugal type of pump. A self adjusting braking device for the turbine is also disclosed, which prevents over-rotation and is also capable of storing heat energy generated during braking. 4 figs.

  16. Engineering co-operation

    Energy Technology Data Exchange (ETDEWEB)

    Hryniszak, W

    1981-06-01

    A purposeful employment policy for human energy is basic to solving the energy dilemma, but a lack of understanding about human behavior has allowed man's exploitive characteristics to dominate during the Inductrial Revolution. England is dependent on trade to survive, but the importance of size in world competition is seen in the trend toward multinational and partnership enterprises. Reflecting this increasing competition, the engineering industries see a need for government policies that acknowledge the importance of technology and the effects of those policies on productivity. Engineering progress requires the creativity of optimistic idealism and the realism of implementing new ideas. The training and nurturing of human resources should begin by broadening the education of engineers to emphasize the concepts of quality and cooperation between government and industry. Engineers and scientists, who work within society, need to understand national demands and to operate in accordance with the highest moral standards. (DCK)

  17. First operation of BEBC

    CERN Document Server

    Reinhard, H P

    1973-01-01

    BEBC has been successfully operated from January to March 1973. The stainless steel piston was used in the magnetic field up to 2.6 T without visible degradation of the tracks. The pictures show good contrast and resolution and no visible distortion due to thermal turbulences. Reconstruction has not yet been done because only two views are available and no optical constants of the fish eyes were measured under working conditions. The dynamic load was quite high (25 KJ per pulse) and mainly due to excessive boiling around the piston seal. Actually the gap between the seal and the piston has been found to be several tenths of mm. Furthermore the pump which was supposed to run the heat exchanger near the piston seal below atmospheric pressure could not be put into service. (0 refs).

  18. Bascoms operation for pilonidalcyste

    DEFF Research Database (Denmark)

    Bertelsen, C.A.; Jørgensen, Lars Nannestad

    2008-01-01

    . MATERIALS AND METHODS: 59 patients (53 male) underwent surgery between September 2004 and January 2007. The median age was 27.7 (16-48) years. The indication for surgery was recurrent pilonidal cysts in 17 cases, impaired wound healing after prior surgery in 7 cases and large cysts in 35 cases. RESULTS: All......INTRODUCTION: Treatment of pilonidal fistula often results in impaired wound healing and recurrence. After wide excision of the fistula, impaired healing and recurrence occur in up to 69% and 10-29% of cases, respectively. Based on these facts we decided to implement Bascom's cleft-lift operation...... reoperation due to infection, but none of these patients received postoperative antibiotics. 26 (44%) patients developed minor wound defects. In 22 (85%) of these cases, the wounds healed spontaneously in less than 3 months. 42 patients were followed for more than 6 months with a median follow-up of 19 (8...

  19. Operations of LHD

    International Nuclear Information System (INIS)

    Motojima, Osamu

    1995-01-01

    The Large Helical Device (LHD) is a big non-tokamak type superconducting toroidal fusion apparatus, which is an on-going project under construction being completed in 1997. Based on the results of the developments in both areas of the physics and technology researches concerned, the LHD project is expected to contribute to the necessary understandings of the currentless steady-state plasmas, which have a high performance of temperature, density, confinement time and beta value extrapolatable to the reactor regime (Q ∼ 0.35). This paper describes the necessary issues of the major engineering operations scenarios of LHD, which are especially concerned with the SC magnet technology, the expected SC coil performance and obtained technological flexibility, the required functions for the coil power supply and protection circuit, the system control, and the developed closed divertor system for the edge control

  20. Operating systems. [of computers

    Science.gov (United States)

    Denning, P. J.; Brown, R. L.

    1984-01-01

    A counter operating system creates a hierarchy of levels of abstraction, so that at a given level all details concerning lower levels can be ignored. This hierarchical structure separates functions according to their complexity, characteristic time scale, and level of abstraction. The lowest levels include the system's hardware; concepts associated explicitly with the coordination of multiple tasks appear at intermediate levels, which conduct 'primitive processes'. Software semaphore is the mechanism controlling primitive processes that must be synchronized. At higher levels lie, in rising order, the access to the secondary storage devices of a particular machine, a 'virtual memory' scheme for managing the main and secondary memories, communication between processes by way of a mechanism called a 'pipe', access to external input and output devices, and a hierarchy of directories cataloguing the hardware and software objects to which access must be controlled.

  1. Therapy operation at GSI

    International Nuclear Information System (INIS)

    Scheeler, U.; Wilms, D.

    2004-01-01

    GSI is the heavy ion research center in Germany operating the three accelerators UNILAC (linac), SIS (synchrotron) and ESR (storage ring). Experiments are made on the fields of nuclear and atomic physics, plasma physics, nuclear chemistry, material research and biophysics. The most important program of the biophysics group is the study of the advantage of Carbon ions for cancer irradiation. The developed raster-scanning technique allows the direct 3D irradiation of irregular shaped tumor and minimizes the dose in healthy tissue [1],[2]. This method requires the reliable request of a large variety of beam parameters (energy, intensity, beam-spot diameter) for sequential synchrotron cycles. Certain restrictions to the physics experimental program have to be considered during the treatment sessions. To deliver excellent conditions for the other experiments, these restrictions had to be kept a small as possible. (author)

  2. Gulf operators resuming production

    International Nuclear Information System (INIS)

    Koen, A.D.

    1992-01-01

    This paper reports that Gulf of Mexico operators last week were gradually restoring production at installations struck by Hurricane Andrew. The Minerals Management Service continued receiving reports of more damage. By the end of the day Sept. 8, MMS had received reports of damage to 83 pipeline segments and 193 platforms and satellite installations. Damage reports listed 112 installations with structural damage, 13 platforms toppled and five leaning, and 30 satellite platforms toppled and 33 leaning. But despite the extent of damage the storm inflicted on oil and gas installations in the gulf, it pales in comparison to the misery and suffering the storm caused in Florida and Louisiana, an oil company official said

  3. Gulf operations still recovering

    International Nuclear Information System (INIS)

    Koen, A.D.

    1992-01-01

    This paper reports that reports of damage caused by Hurricane Andrew were leveling off last week at the U.S. Minerals Management Service as Gulf of Mexico operators pressed ahead with repairs. The hurricane struck South Florida Aug. 4, churned west into the gulf, then swung north and hit the South Louisiana coast Aug. 5. By the close of business Sept. 8 MMS had received damage reports covering 83 pipeline segments and 193 platforms and satellite installations. MMS last week estimated about 500 MMcfd of gas production had been restored in the gulf and 100,000-150,000 b/d of oil. Production still lost as a result of Andrew was estimated at 2-2.5 bcfd of gas and 90,000-120 b/d of oil. MMS estimates Gulf of Mexico wells before the storm were producing about 12.5-13 bcfd of gas and 750,000 b/d of oil

  4. Reviewing operational experience feedback

    International Nuclear Information System (INIS)

    1991-04-01

    The purpose of this document is to provide detailed supplementary guidance to OSART experts to aid in the evaluation of operational experience feedback (OEF) programmes at nuclear power plants. The document begins by describing the objectives of an OEF programme. It goes on to indicate preparatory work and investigatory guidance for the expert. Section 5 describes attributes of an excellent OEF programme. Appended to these guidelines are examples of OEF documents from various plants. These are intended to help the expert by demonstrating the actual implementation of OEF in practice. These guidelines are in no way intended to conflict with existing national regulations and rules. A comprehensive OEF programme, as described in Section 2, would be impossible to evaluated in detail in the amount of time typically allocated for assessing OEF in an OSART review. The expert must use his or her time wisely by concentrating on those areas that appear to be the weakest

  5. Global Operations Networks

    DEFF Research Database (Denmark)

    In the current context of global economic liberalisation and technological advancements, industrial companies are less likely to generate value in the traditional vertically integrated chain. Instead, they are doing so by means of elaborate cross-border and cross-organisational networks. As a rule......, these networks are configured on a global basis and consist of diverse and interdependent affiliates (linked both through ownership and non-equity relationships), which are engaged in an exchange of goods, services and information. The Scandinavian context is no exception to this trend. Nevertheless......, international comparative studies providing comprehensive insights from it are still rare. With the objective of bridging this gap, Global Operations Networks (GONE) project (sponsored by the Danish Research Council) brought together numerous academic and industrial partners from Denmark, Sweden and Finland...

  6. RH Packaging Operations Manual

    International Nuclear Information System (INIS)

    Washington TRU Solutions LLC

    2003-01-01

    This procedure provides operating instructions for the RH-TRU 72-B Road Cask, Waste Shipping Package. In this document, ''Packaging'' refers to the assembly of components necessary to ensure compliance with the packaging requirements (not loaded with a payload). ''Package'' refers to a Type B packaging that, with its radioactive contents, is designed to retain the integrity of its containment and shielding when subject to the normal conditions of transport and hypothetical accident test conditions set forth in 10 CFR Part 71. Loading of the RH 72-B cask can be done two ways, on the RH cask trailer in the vertical position or by removing the cask from the trailer and loading it in a facility designed for remote-handling (RH). Before loading the 72-B cask, loading procedures and changes to the loading procedures for the 72-B cask must be sent to CBFO at sitedocuments at wipp.ws for approval

  7. International operations networks

    CERN Document Server

    Farooq, Sami; Cheng, Yang

    2014-01-01

    Although the area of International Manufacturing Network (IMN) and International Operations Network (ION) has received considerable attention in the literature, most of studies appear multifaceted and interdisciplinary, and thereby require thorough investigation from both academic and practical perspectives, in order to deepen our related understanding. The book seeks advanced contributions that will combine theoretical insights and empirical experience by offering a detailed examination of IMN and, further, ION from various perspectives. This book can be used as a reference material for scholarpractitioners, business executives, and university researchers who need to deepen their understanding on the importance and influence of IMN and ION as well as their development. The book is important because there are few reference/resource materials available related to IMN and ION.

  8. Operation and machine studies

    International Nuclear Information System (INIS)

    1992-01-01

    This annual report describes the GANIL (Grand accelerateur national d'ions lourds, Caen, France) operation and the machine studies realized in 1992. Metallic ions have been accelerated during 36 pc of the time; some were produced for the first time at GANIL: 125 Te, 52 Cr with ECR3, 181 Ta with ECR4. The various machine studies are: comparison of lifetimes of carbon sheets, charge exchange of very heavy ions in carbon foils and in the residual gas of the Ganil cyclotrons, commissioning of the new high intensity axial injection system for Ganil, tantalum acceleration with the new injector, a cyclotron as a mass spectrometer; other studies concerned: implementing the new control system, gettering flux measurement, energy deposited by neutrons and gamma rays in the cryogenic system of SISSI; latest developments on multicharged ECR ion sources, and an on-line isotopic separator test bench at Ganil

  9. Small reactor operating mode

    International Nuclear Information System (INIS)

    Snell, V.G.

    1997-01-01

    There is a potential need for small reactors in the future for applications such as district heating, electricity production at remote sites, and desalination. Nuclear power can provide these at low cost and with insignificant pollution. The economies required by the small scale application, and/or the remote location, require a review of the size and location of the operating staff. Current concepts range all the way from reactors which are fully automatic, and need no local attention for days or weeks, to those with reduced local staff. In general the less dependent a reactor is on local human intervention, the greater its dependence on intrinsic safety features such as passive decay heat removal, low-stored energy and limited reactivity speed and depth in the control systems. A case study of the design and licensing of the SLOWPOKE Energy System heating reactor is presented. (author)

  10. Motor-operated gearbox efficiency

    Energy Technology Data Exchange (ETDEWEB)

    DeWall, K.G.; Watkins, J.C.; Bramwell, D. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Weidenhamer, G.H.

    1996-12-01

    Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, the authors compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators they tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer.

  11. Motor-operated gearbox efficiency

    International Nuclear Information System (INIS)

    DeWall, K.G.; Watkins, J.C.; Bramwell, D.; Weidenhamer, G.H.

    1996-01-01

    Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, the authors compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators they tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer

  12. Computerized automatic tip scanning operation

    International Nuclear Information System (INIS)

    Nishikawa, K.; Fukushima, T.; Nakai, H.; Yanagisawa, A.

    1984-01-01

    In BWR nuclear power stations the Traversing Incore Probe (TIP) system is one of the most important components in reactor monitoring and control. In previous TIP systems, however, operators have suffered from the complexity of operation and long operation time required. The system presented in this paper realizes the automatic operation of the TIP system by monitoring and driving it with a process computer. This system significantly reduces the burden on customer operators and improves plant efficiency by simplifying the operating procedure, augmenting the accuracy of the measured data, and shortening operating time. The process computer is one of the PODIA (Plant Operation by Displayed Information Automation) systems. This computer transfers control signals to the TIP control panel, which in turn drives equipment by microprocessor control. The process computer contains such components as the CRT/KB unit, the printer plotter, the hard copier, and the message typers required for efficient man-machine communications. Its operation and interface properties are described

  13. Motor-operator gearbox efficiency

    International Nuclear Information System (INIS)

    DeWall, K.G.; Watkins, J.C.; Bramwell, D.

    1996-01-01

    Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, we compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators we tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer

  14. Standardization of biodosimetry operations

    International Nuclear Information System (INIS)

    Dainiak, Nicholas

    2016-01-01

    Methods and procedures for generating, interpreting and scoring the frequency of dicentric chromosomes vary among cytogenetic biodosimetry laboratories (CBLs). This variation adds to the already considerable lack of precision inherent in the dicentric chromosome assay (DCA). Although variability in sample collection, cell preparation, equipment and dicentric frequency scoring can never be eliminated with certainty, it can be substantially minimized, resulting in reduced scatter and improved precision. Use of standard operating procedures and technician exchange may help to mitigate variation. Although the development and adoption of international standards (ISO 21243 and ISO 19238) has helped to reduce variation in standard operating procedures (SOPs), all CBLs must maintain process improvement, and those with challenges may require additional assistance. Sources of variation that may not be readily apparent in the SOPs for sample collection and processing include variability in ambient laboratory conditions, media, serum lot and quantity and the use of particular combinations of cytokines. Variability in maintenance and calibration of metafer equipment, and in scoring criteria, reader proficiency and personal factors may need to be addressed. The calibration curve itself is a source of variation that requires control, using the same known-dose samples among CBLs, measurement of central tendency, and generation of common curves with periodic reassessment to detect drifts in dicentric yield. Finally, the dose estimate should be based on common scoring criteria, using of the z-statistic. Although theoretically possible, it is practically impossible to propagate uncertainty over the entire calibration curve due to the many factors contributing to variance. Periodic re-evaluation of the curve is needed by comparison with newly published curves (using statistical analysis of differences) and determining their potential causes. (author)

  15. Operation Peace for Galilee: An Operational Analysis with Relevance Today

    National Research Council Canada - National Science Library

    Thomas, Wilbert

    1998-01-01

    .... Operation Peace for Galilee was epitomized by expert planning and operational excellence, as the IDF achieved its stated aim of establishing a PLO-free 40 kilometer buffer zone north of its border within 40 hours...

  16. Time Operators and Time Crystals

    OpenAIRE

    Nakatsugawa, K.; Fujii, T.; Saxena, A.; Tanda, S.

    2017-01-01

    We investigate time operators in the context of quantum time crystals in ring systems. We demonstrate that a self-adjoint time operator with a periodic time evolution can be derived for a free particle on a ring system: The conventional Aharonov-Bohm time operator is obtained by taking the infinite-radius limit. We also reveal the relationship between our time operator and a $\\mathcal PT$-symmetric time operator. We find that both time operators indeed describe the periodic time evolution of ...

  17. Structure of Hilbert space operators

    CERN Document Server

    Jiang, Chunlan

    2006-01-01

    This book exposes the internal structure of non-self-adjoint operators acting on complex separable infinite dimensional Hilbert space, by analyzing and studying the commutant of operators. A unique presentation of the theorem of Cowen-Douglas operators is given. The authors take the strongly irreducible operator as a basic model, and find complete similarity invariants of Cowen-Douglas operators by using K -theory, complex geometry and operator algebra tools. Sample Chapter(s). Chapter 1: Background (153 KB). Contents: Jordan Standard Theorem and K 0 -Group; Approximate Jordan Theorem of Opera

  18. Operational behaviour of a reactor normal operation and disturbances

    International Nuclear Information System (INIS)

    Geyer, K.H.

    1982-01-01

    During normal operation, the following topics are dealt with: primary and secondary coolant circuits - full load operation - start-up and shutdown - steady state part load diagramm. During disturbances and incidents, the following procedures are discussed: identification and detection of the events - automatic actions - manual actions of the operator - provided indications - explanation of actuated systems - basic information of reactor protection system. (RW)

  19. Survey of Operators Knowledge of Operation and Maintenance of ...

    African Journals Online (AJOL)

    Result showed that the machine failures encountered during operations were as a result of poor management, inadequate maintenance practices, and lack of spare parts, obsoleteness, overloading, careless operations and poor storage of machine after use. Recommendations were therefore given to improve the operation ...

  20. Advanced Operating System Technologies

    Science.gov (United States)

    Cittolin, Sergio; Riccardi, Fabio; Vascotto, Sandro

    In this paper we describe an R&D effort to define an OS architecture suitable for the requirements of the Data Acquisition and Control of an LHC experiment. Large distributed computing systems are foreseen to be the core part of the DAQ and Control system of the future LHC experiments. Neworks of thousands of processors, handling dataflows of several gigaBytes per second, with very strict timing constraints (microseconds), will become a common experience in the following years. Problems like distributyed scheduling, real-time communication protocols, failure-tolerance, distributed monitoring and debugging will have to be faced. A solid software infrastructure will be required to manage this very complicared environment, and at this moment neither CERN has the necessary expertise to build it, nor any similar commercial implementation exists. Fortunately these problems are not unique to the particle and high energy physics experiments, and the current research work in the distributed systems field, especially in the distributed operating systems area, is trying to address many of the above mentioned issues. The world that we are going to face in the next ten years will be quite different and surely much more interconnected than the one we see now. Very ambitious projects exist, planning to link towns, nations and the world in a single "Data Highway". Teleconferencing, Video on Demend, Distributed Multimedia Applications are just a few examples of the very demanding tasks to which the computer industry is committing itself. This projects are triggering a great research effort in the distributed, real-time micro-kernel based operating systems field and in the software enginering areas. The purpose of our group is to collect the outcame of these different research efforts, and to establish a working environment where the different ideas and techniques can be tested, evaluated and possibly extended, to address the requirements of a DAQ and Control System suitable for LHC