WorldWideScience

Sample records for opening switch source

  1. Performance of a plasma opening switch in positive polarity on Gamble I using flashboard plasma sources

    International Nuclear Information System (INIS)

    Renk, T.J.

    1995-01-01

    The successful development of the Plasma Opening Switch (POS) for inductive storage applications has been largely confined to negative polarity operation. Some models of POS behavior suggest that this is because in a positive polarity coaxial configuration, the weaker magnetic field at the cathode position retards the switch opening process. This article describes experiments in which both conductor radii in the POS region were significantly reduced. Anode- and cathode-side current monitors indicate that voltages greater than open-circuit are generated at the POS position, but there is a significant amount of electron flow out of the POS, depending upon load impedance. Flow impedance analysis indicates that a relatively small gap appears in the POS plasma after switch opening. Switch performance is also compared between flashboard and carbon gun plasma sources, with the latter operated both in positive and negative polarity

  2. Measurement of performance parameters of plasma source for plasma opening switch on Qiangguang-Ⅰ generator

    International Nuclear Information System (INIS)

    Luo Weixi; Zeng Zhengzhong; Lei Tianshi; Wang Liangping; Hu Yixiang; Sun Tieping; Huang Tao

    2012-01-01

    The plasma source (cable guns) of the plasma opening switch (POS) on Qiangguang Ⅰ generator was chosen as the study object. The plasma source performance was investigated by using charge collectors. Experimental results show that the plasma ejection density is positively correlated with the structural parameter, the distance between gun core tip and muzzle plane, and the plasma ejection velocity is negatively correlated with the parameter. The increasing rate of plasma ejection density is less than that of drive current. As far as a plasma source with tens of cable plasma guns is concerned, the influence of single cable gun's discharge dispersancy on plasma uniformity is little. Analysis of uncertainty shows that the uncertainty of measurement can be reduced by increasing the number of experiments and averaging the results. The combined standard uncertainty of plasma ejection density is less than 10%. (authors)

  3. Open Source Business Solutions

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2008-01-01

    Full Text Available This analyses the Open source movement. Open source development process and management is seen different from the classical point of view. This focuses on characteristics and software market tendencies for the main Open source initiatives. It also points out the labor market future evolution for the software developers.

  4. Helical EMG module with explosive current opening switches

    International Nuclear Information System (INIS)

    Chernyshev, V.K.; Vakhrushev, V.V.; Volkov, G.I.; Ivanov, V.A.; Fetisov, I.K.

    1990-01-01

    To carry out the experimental work to study plasma properties, electromagnetic sources with 10 6 to 10 8 J of stored energy delivered to the load in microsecond time, are required. Among the current electromagnetic storage devices, the explosive magnetic generators (EMG) are of the largest energy capacity. The disadvantages of this type of generators is relatively long time (ten of microseconds) of electromagnetic energy cumulation in the deformable circuit. To reduce the time of energy transfer to the load to a microsecond range the switching scheme is generally used, where the cumulation circuit and that of the load are separated and connected in parallel via a switching element (opening switch) providing generation of desired power. In this paper, some ways and means of designing opening switches to generate high current pulses have been investigated. The opening switches to generate high current pulses have been investigated. The opening switches which operation is based on mechanic destruction of the conductor using high explosive, have the highest and most reliable performance. The authors have explored the mechanic disruption of a thin conductor (foil), the technique based on throwing the foil at the ribbed barrier of electric insulator material. The report presents the data obtained in studying the operation of this type of opening switch having cylindrical shape, 200 mm in diameter and 200 mm long, designed for generation of 5.5 MA current pulse in the load

  5. Open-Source Colorimeter

    OpenAIRE

    Anzalone, Gerald C.; Glover, Alexandra G.; Pearce, Joshua M.

    2013-01-01

    The high cost of what have historically been sophisticated research-related sensors and tools has limited their adoption to a relatively small group of well-funded researchers. This paper provides a methodology for applying an open-source approach to design and development of a colorimeter. A 3-D printable, open-source colorimeter utilizing only open-source hardware and software solutions and readily available discrete components is discussed and its performance compared to a commercial porta...

  6. Simulation of plasma erosion opening switches

    International Nuclear Information System (INIS)

    Mason, R.J.; Jones, M.E.

    1988-01-01

    Recent progress in the modeling of Plasma Erosion Opening Switches is reviewed, and new results from both fluid and particle simulation compared. Three-fluid simulations with the ANTHEM code for switches on the NRL GAMBLE I machine and SNL PBFA II machine have shown strong dependence of the opening dynamics on the anode structure, the threshold for electron emission, on the possible presence of anomalous resistivity, and on advection of the magnetic field with cathode emitted electrons. Simulations with the implicit particle-in-cell code ISIS confirm these observations, but manifest broader current channels---in better agreement with GAMBLE I experimental results. 7 refs., 3 figs

  7. Open source community organization

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2009-05-01

    Full Text Available Open Source communities (OSCs), sometimes referred to as virtual or online communities play a significant role in terms of the contribution they continue to make in producing user-friendly Open Source Software (OSS) solutions. Many projects have...

  8. Creating Open Source Conversation

    Science.gov (United States)

    Sheehan, Kate

    2009-01-01

    Darien Library, where the author serves as head of knowledge and learning services, launched a new website on September 1, 2008. The website is built with Drupal, an open source content management system (CMS). In this article, the author describes how she and her colleagues overhauled the library's website to provide an open source content…

  9. Theoretical model for plasma opening switch

    International Nuclear Information System (INIS)

    Baker, L.

    1980-07-01

    The theory of an explosive plasma switch is developed and compared with the experimental results of Pavlovskii and work at Sandia. A simple analytic model is developed, which predicts that such switches may achieve opening times of approximately 100 ns. When the switching time is limited by channel mixing it scales as t = C(m d 0 )/sup 1/2/P 0 2 P/sub e//sup -5/2/ where m is the foil mass per unit area, d 0 the channel thickness and P 0 the channel pressure (at explosive breakout), P/sub e/ the explosive pressure, C a constant of order 10 for c.g.s. units. Thus faster switching times may be achieved by minimizing foil mass and channel pressure, or increasing explosive product pressure, with the scaling exponents as shown suggesting that changes in pressures would be more effective

  10. Plasma opening switch experiments on supermite

    International Nuclear Information System (INIS)

    Mendel, C.W.; Quintenz, J.P.; Rosenthal, S.E.; Savage, M.E.

    1988-01-01

    Experiments using plasma opening switches with fast field coils and plasmas injected on slow magnetic fields are described. Data showing the measurement of the field penetration into the volume that initially held the plasma fill will be shown. Assuming the plasma is mostly pushed back from the coil, rather than being penetrated by the magnetic field allows the density to be calculated, and gives densities of a few times 10 13 cm -3 for our usual operating range. The data makes it clear that the switch is open well before the initial plasma volume is completely penetrated by the magnetic fields. Additional measurements relating to the magnetic field penetration distance and physical penetration mechanism are presented. Other data presented show a magnetic insulation problem which must be solved before very large voltage multiplication can be accomplished with sufficient switch efficiency

  11. Launched electrons in plasma opening switches

    International Nuclear Information System (INIS)

    Mendel, C.W. Jr.; Rochau, G.E.; Sweeney, M.A.; McDaniel, D.H.; Quintenz, J.P.; Savage, M.E.; Lindman, E.L.; Kindel, J.M.

    1989-01-01

    Plasma opening switches have provided a means to improve the characteristics of super-power pulse generators. Recent advances involving plasma control with fast and slow magnetic fields have made these switches more versatile, allowing for improved switch uniformity, triggering, and opening current levels that are set by the level of auxiliary fields. Such switches necessarily involve breaks in the translational symmetry of the transmission line geometry and therefore affect the electron flow characteristics of the line. These symmetry breaks are the result of high electric field regions caused by plasma conductors remaining in the transmission line, ion beams crossing the line, or auxilliary magnetic field regions. Symmetry breaks cause the canonical momentum of the electrons to change, thereby moving them away from the cathode. Additional electrons are pulled from the cathode into the magnetically insulated flow, resulting in an excess of electron flow over that expected for the voltage and line current downstream of the switch. We call these electrons ''launched electrons''. Unless they are recaptured at the cathode or else are fed into the load and used beneficially, they cause a large power loss downstream. This paper will show examples of SuperMite and PBFA II data showing these losses, explain the tools we are using to study them, and discuss the mechanisms we will employ to mitigate the problem. The losses will be reduced primarily by reducing the amount of launched electron flow. 7 refs., 9 figs

  12. Open source development

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2004-01-01

    This paper addresses innovations based on open source or non-proprietary knowledge. Viewed through the lens of private property theory, such agency appears to be a true anomaly. However, by a further turn of the theoretical kaleidoscope, we will show that there may be perfectly justifiable reasons...... for not regarding open source innovations as anomalies. The paper is based on three sectorial and generic cases of open source innovation, which is an offspring of contemporary theory made possible by combining elements of the model of private agency with those of the model of collective agency. In closing...

  13. Open Source Telecommunication Companies

    OpenAIRE

    Peter Liu

    2007-01-01

    Little is known about companies whose core business is selling telecommunications products that lever open source projects. Open source telecommunications (OST) companies operate in markets that are very different from typical software product markets. The telecommunications market is regulated, vertically integrated, and proprietary designs and special chips are widely used. For a telecommunications product to be useful, it must interact with both access network products and core network pro...

  14. Simulation of plasma erosion opening switches

    International Nuclear Information System (INIS)

    Mason, R.J.; Jones, M.E.

    1988-01-01

    The plasma erosion opening switch (PEOS) has been studied with the ANTHEM and ISIS implicit simulation codes. The switch consists of plasma fill injected into a transmission line. The plasma initially shorts out the circuit, but eventually it is removed by self-electrical forces, allowing for the delivery of energy to a load. ANTHEM models the plasma by multiple fluids with electron inertia retained, or by the particle-in-cell (PIC) technique. ISIS is an optimized PIC code. Both codes determine electric and magnetic fields by the implicit moment method. This allows for the study of long time full-switch behavior with simulational zone sizes and time steps that are large compared to a Debye length and plasma period, respectively. Thus, the authors have modeled switch behavior at densities ranging from 5 x 10 11 to 5 x 10 14 electrons/cm -3 over drive pulses ranging from 5 to 250 ns. Here, the magnetic field rose linearly from zero to 0.8 or 3.0 Tesla. Switch gaps spanned from 1.0 to 8.0 cm, and inner radii ranged from 0.5 to 20.0 cm. Opening dynamics is shown to depend sensitively on the assumed electron emission thresholds at the cathode, and on the effective conductivity of the anode. The particle simulations predict broader current channels than the multi-fluid calculations - reasons for this are discussed. The effect of numerical diffusion in implicit simulations is examined. The response to realistic load impedances (10 Ohms for Sandia National Laboratory's PBFA II accelerator) of the opening characteristics is described. Advantages from plasma fill near the load are investigated. The action of preset initial magnetic fields aligned with the power flow, and of trigger magnetic fields for controlled removal of the plasma is discussed

  15. The experimental investigation of explosive opening switch

    International Nuclear Information System (INIS)

    Zhang Jiande; Zhong Huihuang; Li Chuanlu; Liu Yonggui; Cheng Dongqun; Peng Xianyang

    1996-01-01

    The explosive opening switch (EOS) used in explosive-driven magnetic-flux compression generator (EMCG) circuits was investigated. It is shown that (1) under certain conditions, the EOS voltage is hardly dependent on the size of the explosive and aluminium foil used in EOS; (2) with the explosive coated by an insulator pipe, the opening effect of EOS is better; (3) by use of EOS, a pulse with 5 kA current, 100 kV voltage and 250 ns risetime has been transferred into a resistance load. (author). 12 figs., 5 refs

  16. The experimental investigation of explosive opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Jiande, Zhang; Huihuang, Zhong; Chuanlu, Li; Yonggui, Liu; Dongqun, Cheng; Xianyang, Peng [National Univ. of Defense Technology, Changsha (China). Dept. of Applied Physics

    1997-12-31

    The explosive opening switch (EOS) used in explosive-driven magnetic-flux compression generator (EMCG) circuits was investigated. It is shown that (1) under certain conditions, the EOS voltage is hardly dependent on the size of the explosive and aluminium foil used in EOS; (2) with the explosive coated by an insulator pipe, the opening effect of EOS is better; (3) by use of EOS, a pulse with 5 kA current, 100 kV voltage and 250 ns risetime has been transferred into a resistance load. (author). 12 figs., 5 refs.

  17. Open Source Telecommunication Companies

    Directory of Open Access Journals (Sweden)

    Peter Liu

    2007-08-01

    Full Text Available Little is known about companies whose core business is selling telecommunications products that lever open source projects. Open source telecommunications (OST companies operate in markets that are very different from typical software product markets. The telecommunications market is regulated, vertically integrated, and proprietary designs and special chips are widely used. For a telecommunications product to be useful, it must interact with both access network products and core network products. Due to specifications in Service Agreements Levels, penalties for failures of telecommunications products are very high. This article shares information that is not widely known, including a list of OST companies and the open source projects on which they depend, the size and diversity of venture capital investment in OST companies, the nature of the commercial product-open source software and company-project relationships, ways in which OST companies make money, benefits and risks of OST companies, and competition between OST companies. Analysis of this information provides insights into the ways in which companies can build business models around open source software. These findings will be of interest to entrepreneurs, top management teams of incumbent companies that sell telecommunications products, and those who care about Ontario's ability to compete globally.

  18. Open source molecular modeling.

    Science.gov (United States)

    Pirhadi, Somayeh; Sunseri, Jocelyn; Koes, David Ryan

    2016-09-01

    The success of molecular modeling and computational chemistry efforts are, by definition, dependent on quality software applications. Open source software development provides many advantages to users of modeling applications, not the least of which is that the software is free and completely extendable. In this review we categorize, enumerate, and describe available open source software packages for molecular modeling and computational chemistry. An updated online version of this catalog can be found at https://opensourcemolecularmodeling.github.io. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

  19. Plasma opening switch with extrinsic magnetic field

    CERN Document Server

    Dolgachev, G; Maslennikov, D

    2001-01-01

    Summary form only given, as follows. We have demonstrated in series of experiments that plasma opening switch (POS) switching voltage (UPOS) is defined by energy density (w) deposited in the POS plasma. If we then consider a plasma erosion mainly responsible for the effect of POS switching (the erosion effect could be described by Hall or Child-Langmuir models) the energy density (w) could be measured as a function of a system "macro-parameter" such as the initial charging voltage of the capacity storage system (the Marx pulsed voltage generator) UMarx. The POS voltage in this case could be given by UPOS"aw=aUMarx4/7, where a is a constant. This report demonstrates that for the high-impedance POS which has limited charge density transferred through the POS plasma a"2.5 (MV3/7) with no external magnetic field applied. The use of the extrinsic magnetic field allows to increase a up to 3.6 (MV3/7) and to achieve higher voltages at the opening phase - UPOS=3.6UMarx4/7. To verify this approach set of experimental ...

  20. Plasma-ring, fast-opening switch

    International Nuclear Information System (INIS)

    Hartman, C.W.; Eddleman, J.; Hammer, J.H.

    1986-01-01

    The authors discuss a fast-opening switch concept based on magnetically confined plasma rings, PROS (for Plasma Ring Opening Switch). In PROS, the plasma ring, confined by Bθ /sub and B/poloidal /sub fields of a compact torus, provide a low mass, localized conduction path between coaxial electrodes. To operate the switch, driver current is passed across the electrodes through the ring, storing inductive energy in external inductance and between the electrodes on the driver side of the ring. The ring is accelerated away from the driver by the field of the driver current and passes over a load gap transferring the current to the load. The authors distinguish two configurations in PROS, straight PROS where the electrodes are coaxial cylinders, and cone PROS with conical electrodes. In straight PROS ring acceleration takes place during the inductive store period as in foil switches, but with the localized ring providing the current path. Increased performance is predicted for the cone PROS (see figure) which employs compression of the ring in the cone during the inductive store period. Here, the B/θ /sub field of the driver forces the ring towards the apex of the cone but the force is in near balance with the opposing component of the radial equilibrium force of the ring along the cone. As a result, the ring undergoes a slow, quasistatic compression limited only by resistive decay of the ring field. Slow compression allows inductive storage with low-power drivers (homopoloar, magneto cumulative generators, high C-low V capacitor banks, etc.). Near the apex of the cone, near peak compression, the ring is allowed to enter a straight coaxial section where, because of low-mass, it rapidly accelerates to high velocity and crosses the load gap

  1. Open-source colorimeter.

    Science.gov (United States)

    Anzalone, Gerald C; Glover, Alexandra G; Pearce, Joshua M

    2013-04-19

    The high cost of what have historically been sophisticated research-related sensors and tools has limited their adoption to a relatively small group of well-funded researchers. This paper provides a methodology for applying an open-source approach to design and development of a colorimeter. A 3-D printable, open-source colorimeter utilizing only open-source hardware and software solutions and readily available discrete components is discussed and its performance compared to a commercial portable colorimeter. Performance is evaluated with commercial vials prepared for the closed reflux chemical oxygen demand (COD) method. This approach reduced the cost of reliable closed reflux COD by two orders of magnitude making it an economic alternative for the vast majority of potential users. The open-source colorimeter demonstrated good reproducibility and serves as a platform for further development and derivation of the design for other, similar purposes such as nephelometry. This approach promises unprecedented access to sophisticated instrumentation based on low-cost sensors by those most in need of it, under-developed and developing world laboratories.

  2. Open-Source Colorimeter

    Science.gov (United States)

    Anzalone, Gerald C.; Glover, Alexandra G.; Pearce, Joshua M.

    2013-01-01

    The high cost of what have historically been sophisticated research-related sensors and tools has limited their adoption to a relatively small group of well-funded researchers. This paper provides a methodology for applying an open-source approach to design and development of a colorimeter. A 3-D printable, open-source colorimeter utilizing only open-source hardware and software solutions and readily available discrete components is discussed and its performance compared to a commercial portable colorimeter. Performance is evaluated with commercial vials prepared for the closed reflux chemical oxygen demand (COD) method. This approach reduced the cost of reliable closed reflux COD by two orders of magnitude making it an economic alternative for the vast majority of potential users. The open-source colorimeter demonstrated good reproducibility and serves as a platform for further development and derivation of the design for other, similar purposes such as nephelometry. This approach promises unprecedented access to sophisticated instrumentation based on low-cost sensors by those most in need of it, under-developed and developing world laboratories. PMID:23604032

  3. Open Source Software Acquisition

    DEFF Research Database (Denmark)

    Holck, Jesper; Kühn Pedersen, Mogens; Holm Larsen, Michael

    2005-01-01

    Lately we have seen a growing interest from both public and private organisations to adopt OpenSource Software (OSS), not only for a few, specific applications but also on a more general levelthroughout the organisation. As a consequence, the organisations' decisions on adoption of OSS arebecoming...

  4. Open source posturography.

    Science.gov (United States)

    Rey-Martinez, Jorge; Pérez-Fernández, Nicolás

    2016-12-01

    The proposed validation goal of 0.9 in intra-class correlation coefficient was reached with the results of this study. With the obtained results we consider that the developed software (RombergLab) is a validated balance assessment software. The reliability of this software is dependent of the used force platform technical specifications. Develop and validate a posturography software and share its source code in open source terms. Prospective non-randomized validation study: 20 consecutive adults underwent two balance assessment tests, six condition posturography was performed using a clinical approved software and force platform and the same conditions were measured using the new developed open source software using a low cost force platform. Intra-class correlation index of the sway area obtained from the center of pressure variations in both devices for the six conditions was the main variable used for validation. Excellent concordance between RombergLab and clinical approved force platform was obtained (intra-class correlation coefficient =0.94). A Bland and Altman graphic concordance plot was also obtained. The source code used to develop RombergLab was published in open source terms.

  5. A novel carbon gun for use with plasma opening switches

    International Nuclear Information System (INIS)

    Stevenson, P.; Gregory, K.; Cliffe, R.J.; Smith, I.R.

    2001-01-01

    The carbon gun is probably the most common plasma source used in plasma opening switches. Nevertheless, it either produces a contaminated plasma, as the flashover surface erodes, or requires regular treatment with graphite paint. The novel form of the plasma gun described in this paper overcomes the disadvantages of existing designs and produces a cleaner plasma. Experimental results illustrate the performance of a prototype system. (author)

  6. High explosive driven plasma opening switches

    International Nuclear Information System (INIS)

    Greene, A.E.; Bowers, R.L.; Brownell, J.H.; Goforth, J.H.; Oliphant, T.A.; Weiss, D.L.

    1983-01-01

    A joint theoretical and experimental effort is underway to understand and improve upon the performance of high explosive driven plasma opening switches such as those first described by Pavlovskii et al. We have modeled these switches in both planar and cylindrical geometry using a one dimensional Lagrangian MHD code. This one-dimensional analysis is now essentially complete. It has shown that simple, one-dimensional, compression of the current-carrying channel can explain the observed resistance increases during the time of flight of the HE detonation products. Our calculations imply that ionization plays an important role as an energy sink and the performance of these switches might be improved by a judicious choice of gases. We also predict improved performance by lowering the pressure in the plasma channel. The bulk of our experimental effort to date has been with planar switches. We have worked with current densities of 0.25 to 0.4 MA/cm and have observed resistance increases of 40 to 60 mΩ. Significant resistance increases are observed later than the time of flight of the HE detonation products. We suggest that these resistance increases are due to mixing between the hot plasma and the relatively cooler detonation products. Such mixing is not included in the 1-D, Lagrangian code. We are presently beginning a computational effort with a 2-D Eulerian code. The status of this effort is discussed. Experimentally we have designed an apparatus that will permit us to test the role of different gases and pressures. This system is also in a planar geometry, but the plasma channel is doughnut shaped, permitting us to avoid edge effects associated with the planar rectangular geometry. The first experiments with this design are quite encouraging and the status of this effort is also discussed

  7. Open Source, Openness, and Higher Education

    Science.gov (United States)

    Wiley, David

    2006-01-01

    In this article David Wiley provides an overview of how the general expansion of open source software has affected the world of education in particular. In doing so, Wiley not only addresses the development of open source software applications for teachers and administrators, he also discusses how the fundamental philosophy of the open source…

  8. From Open Source to Open Collaboration

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Open source is the right to modify, not the right to contribute. Are external contributions absent from your project? Have you ever thought about what is it like to be a new contributor on your project? I challenge you to transform your project from Open Source to an Open Collaboration.

  9. Open Source Software Development

    Science.gov (United States)

    2011-01-01

    appropriate to refer to FOSS or FLOSS (L for Libre , where the alternative term “ libre software ” has popularity in some parts of the world) in order...Applying Social Network Analysis to Community-Drive Libre Software Projects, Intern. J. Info. Tech. and Web Engineering, 2006, 1(3), 27-28. 17...Open Source Software Development* Walt Scacchi Institute for Software Researcher University of California, Irvine Irvine, CA 92697-3455 USA Abstract

  10. Anomalous resistivity in the plasma opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Dolgachev, G I; Zakatov, L P; Kalinin, Yu G; Kingsep, A S; Nitishinskij, M S; Ushakov, A G [Kurchatov Institute, Moscow (Russian Federation). Applied Physics Division

    1997-12-31

    Experimental studies and modelling together with analytical considerations of anomalous resistivity in the plasma opening switch (POS) are being pursued to improve the understanding of the physical mechanism of the POS conduction phase. Experiments have been undertaken for a `microsecond` POS of coaxial geometry. Measurements of Stark broadening of the H{sub {alpha}} line allowed turbulent oscillations in plasma to be found at the conductivity stage. A comparison with the modelling including low-frequency (ion-acoustic) turbulence and Doppler broadening (neutral gas temperature 1-3 eV) the electric field value to be estimated to 10-30 kV/cm. The turbulent field increased toward the cathode up to 50 kV/cm in the near-cathode layer. (author). 3 figs., 14 refs.

  11. Limiting parameters of the plasma opening switch

    International Nuclear Information System (INIS)

    Dolgachev, G.I.; Ushakov, A.G.

    2001-01-01

    Implementing programs for nuclear fusion research and X-ray generation requires the creation of superpower generators based on plasma opening switches (POSs) capable of commutating currents as high as several tens of megaamperes at output voltages of up to 5 MV and higher. The physical mechanisms limiting the POS voltage are investigated. It is shown that, as the generator voltage U g increases, the voltage multiplication factor k U POS /U g (where U POS is the POS voltage) decreases. An explanation for such a dependence is proposed, and the maximum value of the POS voltage is estimated. A POS design that enables operating in the above current and voltage ranges is considered. The design is based on applying an external magnetic field to the POS interelectrode gap, increasing the initial generator voltage, and decreasing the linear (along the perimeter of the outer electrode) density of the charge passing through the POS during the conduction phase

  12. From Open Source Software to Open Source Hardware

    OpenAIRE

    Viseur , Robert

    2012-01-01

    Part 2: Lightning Talks; International audience; The open source software principles progressively give rise to new initiatives for culture (free culture), data (open data) or hardware (open hardware). The open hardware is experiencing a significant growth but the business models and legal aspects are not well known. This paper is dedicated to the economics of open hardware. We define the open hardware concept and determine intellectual property tools we can apply to open hardware, with a str...

  13. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Directory of Open Access Journals (Sweden)

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  14. Electronic logic to enhance switch reliability in detecting openings and closures of redundant switches

    Science.gov (United States)

    Cooper, James A.

    1986-01-01

    A logic circuit is used to enhance redundant switch reliability. Two or more switches are monitored for logical high or low output. The output for the logic circuit produces a redundant and failsafe representation of the switch outputs. When both switch outputs are high, the output is high. Similarly, when both switch outputs are low, the logic circuit's output is low. When the output states of the two switches do not agree, the circuit resolves the conflict by memorizing the last output state which both switches were simultaneously in and produces the logical complement of this output state. Thus, the logic circuit of the present invention allows the redundant switches to be treated as if they were in parallel when the switches are open and as if they were in series when the switches are closed. A failsafe system having maximum reliability is thereby produced.

  15. Microsecond plasma opening switch experiments on GIT-4

    Energy Technology Data Exchange (ETDEWEB)

    Bystritskij, V M; Lisitsyn, I V; Sinebryukhov, A A; Sinebryukhov, V A [Russian Academy of Sciences, Tomsk (Russian Federation). Inst. of Electrophysics; Kim, A A; Kokshenev, V A; Koval` chuk, B M [Russian Academy of Sciences, Tomsk (Russian Federation). High Current Electronics Inst.

    1997-12-31

    The plasma opening switch (POS) operation at the current level up to 2 MA was studied at the terawatt power GIT-4 generator. The experiments are described in which the electrode diameter and the strength of the applied magnetic field were varied, and different plasma sources were used. It is shown that the high voltage / low impedance switch operation can be achieved if the linear current density at the POS cathode does not exceed 20 kA/cm. This value limits the maximum cathode diameter of the magnetically insulated transmission line. The anode diameter is limited by the requirement of no gap closure with a dense electrode plasma. The application of external magnetic field decreases the plasma density necessary for achieving a long POS conduction time operation regime. (J.U.). 1 tab., 4 refs.

  16. Microsecond plasma opening switch experiments on GIT-4

    International Nuclear Information System (INIS)

    Bystritskij, V.M.; Lisitsyn, I.V.; Sinebryukhov, A.A.; Sinebryukhov, V.A.; Kim, A.A.; Kokshenev, V.A.; Koval'chuk, B.M.

    1996-01-01

    The plasma opening switch (POS) operation at the current level up to 2 MA was studied at the terawatt power GIT-4 generator. The experiments are described in which the electrode diameter and the strength of the applied magnetic field were varied, and different plasma sources were used. It is shown that the high voltage / low impedance switch operation can be achieved if the linear current density at the POS cathode does not exceed 20 kA/cm. This value limits the maximum cathode diameter of the magnetically insulated transmission line. The anode diameter is limited by the requirement of no gap closure with a dense electrode plasma. The application of external magnetic field decreases the plasma density necessary for achieving a long POS conduction time operation regime. (J.U.). 1 tab., 4 refs

  17. Open source clustering software.

    Science.gov (United States)

    de Hoon, M J L; Imoto, S; Nolan, J; Miyano, S

    2004-06-12

    We have implemented k-means clustering, hierarchical clustering and self-organizing maps in a single multipurpose open-source library of C routines, callable from other C and C++ programs. Using this library, we have created an improved version of Michael Eisen's well-known Cluster program for Windows, Mac OS X and Linux/Unix. In addition, we generated a Python and a Perl interface to the C Clustering Library, thereby combining the flexibility of a scripting language with the speed of C. The C Clustering Library and the corresponding Python C extension module Pycluster were released under the Python License, while the Perl module Algorithm::Cluster was released under the Artistic License. The GUI code Cluster 3.0 for Windows, Macintosh and Linux/Unix, as well as the corresponding command-line program, were released under the same license as the original Cluster code. The complete source code is available at http://bonsai.ims.u-tokyo.ac.jp/mdehoon/software/cluster. Alternatively, Algorithm::Cluster can be downloaded from CPAN, while Pycluster is also available as part of the Biopython distribution.

  18. Comparison of Ion Beam opening switch and plasma opening switch performance

    International Nuclear Information System (INIS)

    Greenly, J.R.; Rondeau, G.D.; Sheldon, H.T.; Dreike, P.L.

    1986-01-01

    The Ion Beam opening switch (IBOS) experiment has shown that an intense charge-neutralized ion beam can carry current across a vacuum magnetically-insulated transmission line and then transfer that current to a downstream load quickly. In the IBOS experiment, a 10 cm wide parallel plate transmission line was fed up to 100 kA peak current by a 4Ω, 100 ns pulser. An ion beam of up to 100 A/cm/sup 2/, 100-300 keV protons or carbon was injected through the anode of the line in a 10 cm x 10 cm region. The line terminated in either a 15 nH short circuit or an electron diode with variable gap. The ion beam switch was able to carry up to 70 kA of line current before load current began to flow. This model is also quantitatively consistent with the observation that switch conduction current is not linear with either injected ion beam current or switch area

  19. Current distribution in a plasma erosion opening switch

    International Nuclear Information System (INIS)

    Weber, B.V.; Commisso, R.J.; Meger, R.A.; Neri, J.M.; Oliphant, W.F.; Ottinger, P.F.

    1984-01-01

    The current distribution in a plasma erosion opening switch is determined from magnetic field probe data. During the closed state of the switch the current channel broadens rapidly. The width of the current channel is consistent with a bipolar current density limit imposed by the ion flux to the cathode. The effective resistivity of the current channel is anomalously large. Current is diverted to the load when a gap opens near the cathode side of the switch. The observed gap opening can be explained by erosion of the plasma. Magnetic pressure is insufficient to open the gap

  20. Current distribution in a plasma erosion opening switch

    International Nuclear Information System (INIS)

    Weber, B.V.; Commisso, R.J.; Meger, R.A.; Neri, J.M.; Oliphant, W.F.; Ottinger, P.F.

    1985-01-01

    The current distribution in a plasma erosion opening switch is determined from magnetic field probe data. During the closed state of the switch the current channel broadens rapidly. The width of the current channel is consistent with a bipolar current density limit imposed by the ion flux to the cathode. The effective resistivity of the current channel is anomalously large. Current is diverted to the load when a gap opens near the cathode side of the switch. The observed gap opening can be explained by erosion of the plasma. Magnetic pressure is insufficient to open the gap

  1. Defining Open Source

    Directory of Open Access Journals (Sweden)

    Russ Nelson

    2007-09-01

    Full Text Available The Open Source Initiative and the Free Software Foundation share a common goal: that everyone should be free to modify and redistribute the software they commonly use. 'Should' is of course a normative word. For the FSF, 'should' is a moral imperative. Anything else is an immoral restriction on people's activities, just as are restrictions on speech, press, movement, and religion. For the OSI, freedom is a necessary precondition for a world where "software doesn't suck", in the words of a founder of the OSI. The FSF started from its founder's GNU Manifesto widely published in 1985. Given the manifesto's hostility to copyright, and given the failure of the Free Software Foundation to gain any traction amongst commercial users of software even with a 13-year head start, a group of people gathered together in 1998 to talk about a new strategy to get the corporate world to listen to hackers. They were impressed by Eric Raymond's Cathedral and the Bazaar's take-up among business leaders.

  2. Editorial: Open Source in Government

    Directory of Open Access Journals (Sweden)

    Dru Lavigne

    2009-04-01

    Full Text Available Last summer, the Center for Strategic and International Studies published the sixth update to their Open Source Policy survey. The survey "tracks governmental policies on the use of open source software as reported in the press or other media." The report lists 275 open source policy initiatives. It also breaks down by country and by government level whether the policy on the use of open source is considered to be advisory, preferential, or mandatory. The editorial theme for the May issue of the OSBR is "open source in government" and we are pleased that the authors have drawn upon their experiences to provide insight into public policy regarding open source for many parts of the world.

  3. Open source software and libraries

    OpenAIRE

    Randhawa, Sukhwinder

    2008-01-01

    Open source software is, software that users have the ability to run, copy, distribute, study, change, share and improve for any purpose. Open source library software’s does not need the initial cost of commercial software and enables libraries to have greater control over their working environment. Library professionals should be aware of the advantages of open source software and should involve in their development. They should have basic knowledge about the selection, installation and main...

  4. Experiments on microsecond conduction time plasma opening switch mechanisms

    International Nuclear Information System (INIS)

    Rix, W.; Coleman, M.; Miller, A.R.; Parks, D.; Robertson, K.; Thompson, J.; Waisman, E.; Wilson, A.

    1993-01-01

    The authors describe a series of experiments carried out on ACE 2 and ACE 4 to elucidate the mechanisms controlling the conduction and opening phases on plasma opening switches in a radial geometry with conduction times on the order of a microsecond. The results indicate both conduction and opening physics are similar to that observed on lower current systems in a coaxial geometry

  5. Heavy-duty explosively operated pulsed opening and closing switches

    International Nuclear Information System (INIS)

    Peterson, D.R.; Price, J.H.; Upshaw, J.L.; Weldon, W.F.; Zowarka, R.C.; Gully, J.H.; Spann, M.L.

    1991-01-01

    This paper discusses improvements to heavy duty, explosively operated, opening and closing switches to reduce component cost, installation cost, and turnaround time without sacrificing reliability. Heavy duty opening and closing switches operated by small explosive charges (50 g or less) are essential to operation of the 60 MJ Balcones power supply. The six independent modules - a 10 MJ homopolar generator (HPG) and a 6 μH storage inductor - can be discharged sequentially, a valuable feature for shaping the current pulse delivered to loads such as high-energy railguns. Each delayed inductor must be isolated from the railgun circuit with a heavy duty closing switch capable of carrying megampere currents to millisecond duration. Similar closing switches are used to crowbar the railgun as the projectile approaches the muzzle: noise reduction, reduction of muzzle arc damage, and reduction of post-launch perturbation of projectile flight. The switches - both opening and closing - are characterized by microhm resistance in the closed state. Current is carried in metallic conductors. Metal-to-metal seams which carry current are maintained in uniform high pressure contact. Efficient switching is crucial to efficient conversion: rotor kinetic energy to stored inductive energy with ∼50% efficiency, stored inductive energy to projectile kinetic energy with ∼30% efficiency. The switches must operate with a precision and repeatability of 10 -5 s, readily achievable with explosives. The opening switches must be structurally and thermally capable of carrying megampere currents for more than 100 ms (∼10 5 C) and develop 10 kV upon opening, stay open for 10 - 2 s, and safely and reliably dissipate megajoules of inductive energy in the event of a fault, a failure of the switch to operate or an attempt to commutate into an open circuit

  6. Open Source, Open Access, Open Review, Open Data. Initiativen zu mehr Offenheit in der digitalen Welt

    OpenAIRE

    Herb, Ulrich

    2011-01-01

    The article discusses the principles of openess, open access and open availability of information based on the examples of open access to scientific information, open government data, open geographical data and open source software.

  7. Perspectives on Open Source Software

    National Research Council Canada - National Science Library

    Hissam, Scott

    2001-01-01

    Open source software (OSS) is emerging as the software community's next "silver bullet" and appears to be playing a significant role in the acquisition and development plans of the Department of Defense (DoD) and industry...

  8. Performance of magnetically-injected-plasma opening switches on the particle beam fusion accelerator 2

    International Nuclear Information System (INIS)

    Rochau, G.E.; McDaniel, D.H.; Mendel, C.W.; Sweeney, M.A.; Moore, W.B.S.; Mowrer, G.R.; Zagar, D.M.

    1990-01-01

    Plasma opening switch (POS) experiments have been performed on the PBFA II ion beam accelerator to develop a switch which will provide voltage and power gain to an applied-B lithium ion diode. These experiments have successfully coupled power to electron and ion beam diodes using a Magnetically-Injected-Plasma (MIP) POS. Carbon plasma with electron densities of 1 x 10 12 to 2 x 10 13 /cm 3 have been injected from the anode into the 8 cm gap of the 20-ohm Magnetically-Insulated-Transmission Line (MITL) of PBFA II along a B r,z magnetic field. The MIP switch uses the inertia of the plasma to keep the switch closed and the magnetic pressure of B θ from the conduction current to open the switch. The configuration of the injecting magnetic field and the plasma source has a significant effect on the efficiency of coupling power to high impedance loads. Plasma near the center of the injecting magnetic field limits the opening impedance of the switch and subsequently the power delivered to the load. The axial location of the switch with respect to the load has also been identified as a critical parameter in increasing the coupling efficiency. A length of 10 to 20 cm of MITL between the POS and the load has increased the power delivered to the load. Data on switch performance with high impedance loads and factors which improved performance are discussed

  9. Open Source Vulnerability Database Project

    Directory of Open Access Journals (Sweden)

    Jake Kouns

    2008-06-01

    Full Text Available This article introduces the Open Source Vulnerability Database (OSVDB project which manages a global collection of computer security vulnerabilities, available for free use by the information security community. This collection contains information on known security weaknesses in operating systems, software products, protocols, hardware devices, and other infrastructure elements of information technology. The OSVDB project is intended to be the centralized global open source vulnerability collection on the Internet.

  10. Plasma opening switch experiments on the Particle Beam Accelerator II

    International Nuclear Information System (INIS)

    Sweeney, M.A.; McDaniel, D.H.; Mendel, C.W.; Rochau, G.E.; Moore, W.B.S.; Mowrer, G.R.; Simpson, W.W.; Zagar, D.M.; Grasser, T.; McDougal, C.D.

    1989-01-01

    Plasma opening switch (POS) experiments have been done since 1986 on the PBFA-II ion beam accelerator to develop a rugged POS that will open rapidly ( 80%) into a high impedance (> 10 ohm) load. In a recent series of experiments on PBFA II, the authors have developed and tested three different switch designs that use magnetic fields to control and confine the injected plasma. All three configurations couple current efficiently to a 5-ohm electron beam diode. In this experimental series, the PBFA-II Delta Series, more extensive diagnostics were used than in previous switch experiments on PBFA II or on the Blackjack 5 accelerator at Maxwell Laboratories. Data from the experiments with these three switch designs is presented

  11. New solid state opening switches for repetitive pulsed power technology

    Energy Technology Data Exchange (ETDEWEB)

    Lyubutin, S K; Mesyats, G A; Rukin, S N; Slovikovskii, B G; Turov, A M [Russian Academy of Sciences, Ekaterinburg (Russian Federation). Inst. of Electrophysics

    1997-12-31

    In 1991 the authors discovered a semiconductor opening switch (SOS) effect that occurs in p{sup +}-p-n-n{sup +} silicon structures at a current density of up to 60 kA/cm{sup 2}. This effect was used to develop high-power semiconductor opening switches in intermediate inductive storage circuits. The breaking power of the opening switches was as high as 5 GW, the interrupted current being up to 45 kA, reverse voltage up to 1 MV and the current interruption time between 10 and 60 ns. The opening switches were assembled from quantity-produced Russian-made rectifying diodes type SDL with hard recovery characteristic. On the basis of experimental and theoretical investigations of the SOS effect, new SOS diodes were designed and manufactured by the Electrophysical Institute. The paper gives basic parameters of the SOS diodes. The new diodes offer higher values of interrupted current and shorter times of current interruption together with a considerable increase in the energy switching efficiency. The new SOS diodes were used to develop repetitive all-solid-state pulsed generators with an output voltage of up to 250 kV, pulse repetition rate up to 5 kHz, and pulse duration between 10 and 30 ns. (author). 2 tabs., 3 figs., 4 refs.

  12. Experimental study on the characteristics of semiconductor opening switch

    CERN Document Server

    Su Jian Cang; Ding Yong Zhong; Song Zhi Min; Ding Zhen Jie; Liu Guo Zhi

    2002-01-01

    An experimental set-up is developed to measure the characteristics of semiconductor opening switch (SOS). The parameters, such as interruption impedance, current int eruption time, voltage gain, pulse duration and energy transfer efficiency, are studied experimentally. The experimental results show that forward pumping time and reverse pumping time are important parameters for semiconductor opening switches. The influences of forward pumping time and reverse pumping time on interruption time, voltage gain, and energy transfer efficiency are obtained. In the interruption process, the impedance variation is divided into three phases: that is rapid increasing phase, slow change phase and completely interruption phase

  13. The OpenPMU Platform for Open Source Phasor Measurements

    OpenAIRE

    Laverty, David M.; Best, Robert J.; Brogan, Paul; Al-Khatib, Iyad; Vanfretti, Luigi; Morrow, D John

    2013-01-01

    OpenPMU is an open platform for the development of phasor measurement unit (PMU) technology. A need has been identified for an open-source alternative to commercial PMU devices tailored to the needs of the university researcher and for enabling the development of new synchrophasor instruments from this foundation. OpenPMU achieves this through open-source hardware design specifications and software source code, allowing duplicates of the OpenPMU to be fabricated under open-source licenses. Th...

  14. Plasma opening switch for long-pulse intense ion beam

    International Nuclear Information System (INIS)

    Davis, H.A.; Mason, R.J.; Bartsch, R.R.; Greenly, J.B.; Rej, D.J.

    1992-01-01

    A Plasma Opening Switch (POS) is being developed at Los Alamos, as part of an intense ion beam experiment with special application to materials processing. The switch must conduct up to 100 kA for 600 ns, and open quickly to avoid premature gap closure in the ion beam diode load. Power multiplication is not a necessity, but prepulse suppression is. A positive central polarity is desirable, since with it an ion beam can be conveniently launched beyond the switch from the central anode toward a negatively charged target. Thus, otherwise by virtue of traditional scaling rules, a POS was designed with a 1.25 cm radius inner anode, and a 4.75 cm radius outer cathode. This has been constructed, and subjected to circuit, and simulational analysis. The computations are being performed with the 2D ANTHEM implicit code. Preliminary results show a marked difference in switching dynamics, when the central positive polarity is used in place of the more conventional opposite choice. Opening goes by the fast development of a central anode magnetic layer, rather than by the more conventional slow evolution of a cathode gap. With the central anode, higher fill densities are needed to achieve desired conduction times. This has suggested switch design improvements, which are discussed

  15. Plasma opening switch for long-pulse intense ion beam

    International Nuclear Information System (INIS)

    Davis, H.A.; Mason, R.J.; Bartsch, R.R.; Greenly, J.B.; Rej, D.J.

    1993-01-01

    A Plasma Opening Switch (POS) is being developed at Los Alamos, as part of an intense ion beam experiment with special application to materials processing. The switch must conduct up to 100 kA for 400 ns, and open quicky to avoid premature gap closure in the ion beam diode load. Power multiplication is not a necessity, but prepulse suppression is. A positive central polarity is desirable, since with it an ion beam can be conveniently launched beyond the switch from the central anode toward a negatively charged target. Using traditional scaling rules, a POS was designed with a 1.25 cm radius inner anode, and a 5.0 cm radius outer cathode. This has been constructed, and subjected to circuit, and simulational analysis. The computations are being performed with the 2D ANTHEM implicit code. Preliminary results show a marked difference in switching dynamics, when the central positive polarity is used in place of the more conventional opposite choice. Opening is achieved by the fast development of a central anode magnetic layer, rather than by the more conventional slow evolution of a cathode gap. With the central anode, higher fill densities are needed to achieve desired conduction times. This has suggested switch design improvements, which are discussed

  16. Open source systems security certification

    CERN Document Server

    Damiani, Ernesto; El Ioini, Nabil

    2009-01-01

    Open Source Advances in Computer Applications book series provides timely technological and business information for: Enabling Open Source Systems (OSS) to become an integral part of systems and devices produced by technology companies; Inserting OSS in the critical path of complex network development and embedded products, including methodologies and tools for domain-specific OSS testing (lab code available), plus certification of security, dependability and safety properties for complex systems; Ensuring integrated systems, including OSS, meet performance and security requirements as well as achieving the necessary certifications, according to the overall strategy of OSS usage on the part of the adopter

  17. Penetration Tester's Open Source Toolkit

    CERN Document Server

    Faircloth, Jeremy

    2011-01-01

    Great commercial penetration testing tools can be very expensive and sometimes hard to use or of questionable accuracy. This book helps solve both of these problems. The open source, no-cost penetration testing tools presented do a great job and can be modified by the user for each situation. Many tools, even ones that cost thousands of dollars, do not come with any type of instruction on how and in which situations the penetration tester can best use them. Penetration Tester's Open Source Toolkit, Third Edition, expands upon existing instructions so that a professional can get the most accura

  18. Thermal Simulations, Open Boundary Conditions and Switches

    Science.gov (United States)

    Burnier, Yannis; Florio, Adrien; Kaczmarek, Olaf; Mazur, Lukas

    2018-03-01

    SU(N) gauge theories on compact spaces have a non-trivial vacuum structure characterized by a countable set of topological sectors and their topological charge. In lattice simulations, every topological sector needs to be explored a number of times which reflects its weight in the path integral. Current lattice simulations are impeded by the so-called freezing of the topological charge problem. As the continuum is approached, energy barriers between topological sectors become well defined and the simulations get trapped in a given sector. A possible way out was introduced by Lüscher and Schaefer using open boundary condition in the time extent. However, this solution cannot be used for thermal simulations, where the time direction is required to be periodic. In this proceedings, we present results obtained using open boundary conditions in space, at non-zero temperature. With these conditions, the topological charge is not quantized and the topological barriers are lifted. A downside of this method are the strong finite-size effects introduced by the boundary conditions. We also present some exploratory results which show how these conditions could be used on an algorithmic level to reshuffle the system and generate periodic configurations with non-zero topological charge.

  19. Thermal Simulations, Open Boundary Conditions and Switches

    Directory of Open Access Journals (Sweden)

    Burnier Yannis

    2018-01-01

    Full Text Available SU(N gauge theories on compact spaces have a non-trivial vacuum structure characterized by a countable set of topological sectors and their topological charge. In lattice simulations, every topological sector needs to be explored a number of times which reflects its weight in the path integral. Current lattice simulations are impeded by the so-called freezing of the topological charge problem. As the continuum is approached, energy barriers between topological sectors become well defined and the simulations get trapped in a given sector. A possible way out was introduced by Lüscher and Schaefer using open boundary condition in the time extent. However, this solution cannot be used for thermal simulations, where the time direction is required to be periodic. In this proceedings, we present results obtained using open boundary conditions in space, at non-zero temperature. With these conditions, the topological charge is not quantized and the topological barriers are lifted. A downside of this method are the strong finite-size effects introduced by the boundary conditions. We also present some exploratory results which show how these conditions could be used on an algorithmic level to reshuffle the system and generate periodic configurations with non-zero topological charge.

  20. Anthem simulation studies of the plasma opening switch

    International Nuclear Information System (INIS)

    Mason, R.J.

    1993-01-01

    For a deeper understanding of the physical processes governing the Plasma Opening Switch (POS) the authors use the ANTHEM 2D implicit simulation code to study: (1) ion dynamical effects on electrohydrodynamic (EHD) waves propagating along steep density interfaces in the switch plasmas. At radial interfaces where the density jumps toward the anode, these waves can drive a finger of magnetic field into the plasma toward the load. Ion dynamics can open the rear of such fingers into a wedge-like density gap. Then: (2) they examine ion effects in uniform switch plasmas. These first develop potential hill structures at the drive edge of the cathode from the competition between electron velocity advection and EHD magnetic exclusion waves. Magnetic pressure gradients at the hill periphery and EHD effects then establish a density gap propagating along the cathode with radial electron emission from its tip. Similar results are obtained under both multi-fluid and PIC modeling on the plasma components

  1. Open source in Experimental Psychology

    OpenAIRE

    Dalmaijer, Edwin

    2015-01-01

    Talk on using open-source software in experimental psychology. Presented on 3 March 2015, at the Attention, Brain and Cognitive Development group (http://www.psy.ox.ac.uk/research/attention-brain-and-cognitive-development-group) at the University of Oxford's Department of Experimental Psychology.

  2. Open Source Wifi Hotspot Implementation

    Directory of Open Access Journals (Sweden)

    Tyler Sondag

    2007-06-01

    Full Text Available The goal of this paper is to describe a design—including the hardware, software, and configuration––for an open source wireless network. The network designed will require authentication. While care will be taken to keep the authentication exchange secure, the network will otherwise transmit data without encryption.

  3. Refurbishment and open source software

    CSIR Research Space (South Africa)

    Mabuza, S

    2006-11-01

    Full Text Available  & Open Source Software Electronic Waste Management Conference 2006 Sibongile Mabuza 2 Presentation Outline  About Meraka Institute Open Source Centre  Background to OSS  Extending life span using OSS  Different choices for different situations  Examples of... = common grazing ground (Sesotho)  Shared space for creative productivity  Emphasise African nature of scope and needs 4 Meraka Open Source Centre  Open Source Centre is part of the Meraka  Institute.  Currently, there are two offices:  CSIR headquarters  Soweto  Set up to amplify the beneficial impact of...

  4. OSGeo - Open Source Geospatial Foundation

    Directory of Open Access Journals (Sweden)

    Margherita Di Leo

    2012-09-01

    Full Text Available L'esigenza nata verso la fine del 2005 di selezionare ed organizzare più di 200 progetti FOSS4G porta alla nascita nel Febbraio2006 di OSGeo (the Open Source Geospatial Foundation, organizzazione internazionale la cui mission è promuovere lo sviluppo collaborativo di software libero focalizzato sull'informazione geografica (FOSS4G.Open   Source   Geospatial   Foundation (OSGeoThe Open Source Geospatial Foundation (OSGeo  is  a  not-for-profit  organization, created  in  early  2006  to  the  aim  at  sup-porting   the   collaborative   development of  geospatial  open  source  software,  and promote its widespread use. The founda-tion provides financial, organizational and legal support to the broader open source geospatial community. It also serves as an independent  legal  entity  to  which  com-munity  members  can  contribute  code, funding  and  other  resources,  secure  in the knowledge that their contributions will be maintained for public benefit. OSGeo also  serves  as  an  outreach  and  advocacy organization for the open source geospa-tial  community,  and  provides  a  common forum  and  shared  infrastructure  for  im-proving  cross-project  collaboration.  The foundation's projects are all freely available and  useable  under  an  OSI-certified  open source license. The Italian OSGeo local chapter is named GFOSS.it     (Associazione     Italiana     per l'informazione Geografica Libera.

  5. Preliminary experiment research of explosively driven opening switch

    International Nuclear Information System (INIS)

    Li Xiaolin; Chen Dongqun; Li Da; Cao Shengguang; Chen Yingcong

    2010-01-01

    In pulse power technology field, many loads require high current pulse with fast risetime, but sometimes, the common high current pulse powers don't satisfy request, thus there need pulse erection switches of sorts to shorten pulse risetime. Explosively driven opening switch (EDOS) is a good choice, it has simple structure and excellent performance, the primary parameters of EDOS are opening time, opening resistance, opening current and dissipation energy, which determine its performance and range for applications. For this, two kinds of EDOS are designed and manufactured, in the later experiments, the power supply is a 200 μF capacitor and the conductor is 0.03 mm copper foil, the results indicate that the two kinds of EDOS have good performance, the opening time is about 1-3 μs, the opening resistance is about 1-2 Ω, the opening current is about 24-31 kA and the average dissipation energy is about 0.125-0.34 kJ per groove, the capability of conduction current is adjusted by the thickness of conductor along with different opening current. (authors)

  6. Open Standards, Open Source, and Open Innovation: Harnessing the Benefits of Openness

    Science.gov (United States)

    Committee for Economic Development, 2006

    2006-01-01

    Digitization of information and the Internet have profoundly expanded the capacity for openness. This report details the benefits of openness in three areas--open standards, open-source software, and open innovation--and examines the major issues in the debate over whether openness should be encouraged or not. The report explains each of these…

  7. Experimental characterization of GIT-8 plasma opening switch

    International Nuclear Information System (INIS)

    Chuvatin, A.; Rouille, C.; Etlicher, B.; Kim, A.; Loginov, S.; Kokshenev, V.; Kovalchuk, B.

    1996-01-01

    High-current Plasma Opening Switch was experimentally studied on the GIT-8 inductive generator. Cordial laser interferometry allowed investigating the line-integrated POS plasma density dynamics during the switch operation. Recording of the axially distributed Bremsstrahlung radiation from the plasma region was used to determine the axial position where the opening started. The monitoring of fast plasma density oscillations with a characteristic frequency of ω ≅ 5 x 10 7 - 10 8 rad/s prior and during the opening is a new experimental achievement. A special study confirmed that such oscillations appear due to a plasma process. The oscillation frequency depended on the mean electron density as ω ∼ n e -0.5 . (author). 5 figs., 7 refs

  8. Experimental investigation of the ion current distribution in microsecond plasma opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Bystritskij, V; Grigor` ev, S; Kharlov, A; Sinebryukhov, A [Russian Academy of Sciences, Tomsk (Russian Federation). Institute of Electrophysics

    1997-12-31

    This paper is devoted to the investigations of properties of the microsecond plasma opening switch (MPOS) as an ion beam source for surface modification. Two plasma sources were investigated: flash-board and cable guns. The detailed measurements of axial and azimuthal distributions of ion current density in the switch were performed. It was found that the azimuthal inhomogeneity of the ion beam increases from the beginning to the end of MPOS. The advantages and problems of this approach are discussed. (author). 5 figs., 2 refs.

  9. Open-Source Telephony Infrastructure

    CERN Document Server

    CERN. Geneva

    2018-01-01

    TONE (Telephony Open-source Network Evolution) is CERN’s future-proof telephony network. Over the past few years, TONE has evolved from its initial design to a solid reality that accommodates some of CERN’s most critical communication services.   TONE’s architecture was designed to: -          Use VoIP (Voice over IP) standard protocols. -          Avoid vendor lock-in by using open-source components. -          Reduce operational costs. -          Be built on top on the IT department’s Agile Infrastructure, combining Virtual Machines and redundant physical servers.   In this presentation we will review the project’s past and future milestones, main use cases and detailed network architecture.

  10. An 'open source' networked identity

    DEFF Research Database (Denmark)

    Larsen, Malene Charlotte

    2013-01-01

    This paper examines the concept of identity in relation to youth practices on social network sites (SNS). The paper illustrates how writing “I love you” or other emotional statements on each other’s profiles on SNS is not only a common way for Danish teenagers to communicate and practice friendship...... communicative actions – are not only performing their own identity, but are becoming co-constructors of each other's identities, which the author characterizes as an 'open source' networked identity....

  11. Study of opening switch characteristics of a plasma focus

    International Nuclear Information System (INIS)

    Rhee, M.J.; Schneider, R.F.

    1985-01-01

    It is shown that a current charged transmission line and an opening switch can be used as an inductive energy storage system to produce a high power pulse. A plasma focus device, in which a transmission line is inserted in series with the capacitor bank and a coaxial gun, is considered as an inductive energy storage system. The m = 0 instability in the plasma focus is utilized as an opening switch and the disrupted plasma column is considered as bipolar diode. The system is described preferably by the transmission line theory rather than the lumped circuit theory. The relationship between the output voltage and the current drop is given by V = ΔIZ, where Z is the characteristic impedance of the transmission line. The current drop ΔI depends on the mismatched load impedance of the plasma diode which is governed by nature of the m = 0 instability

  12. Electron and ion magnetohydrodynamic effects in plasma opening switches

    International Nuclear Information System (INIS)

    Grossmann, J.M.; DeVore, C.R.; Ottinger, P.F.

    1993-01-01

    Preliminary results are presented of a numerical code designed to investigate electron and ion magnetohydrodynamic effects in plasma erosion opening switches. The present model is one-dimensional and resolves effects such as the JxB deformation of the plasma, and the penetration of magnetic field either by anomalous resistivity or electron magnetohydrodynamics (Hall effect). Comparisons with exact analytic results and experiment are made

  13. Preliminary studies on a plasma focus opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Wong, C S; Moo, S P; Singh, J P [Univ. of Malaya, Kuala Lumpur (Malaysia). Physics Dept., Plasma Research Laboratory; Choi, P [Ecole Polytechnique, Palaiseau (France). Laboratoire de Physique des Milieux Ionises

    1997-12-31

    The small plasma focus device UNU/ICTP PFF has been modified to assess the operation of a plasma focus based long conduction (> 2 {mu}s) opening switch, with a plasma filled diode as the load. The UNU/ICTP PFF is a Mather type plasma focus device powered by a single 15 kV, 30 {mu}F capacitor delivering a peak current of 150 kA when discharged at 15 kV. The device has been optimized for reproducible focusing in various gases including deuterium, argon, carbon dioxide, helium as well as in air. In particular, the optimum operating pressure for air is between 0.5 to 1.1 mbar, whereas for argon it is between 0.3 to 3 mbar. For the operation of the UNU/ICTP PFF as an opening switch, the electrode geometry is modified to redirect the plasma motion at the end of the axial rundown phase to avoid the normal plasma focus action, and the operating regime is shifted to low pressure to favour plasma opening switch action. With air as the working gas, pressure as low as 10{sup -3} mbar was tested. At such a low pressure, a set of 12 plasma injection cable guns is used to initiate breakdown of the discharge. The design and operating principle is presented and some preliminary results obtained on the operational characteristics of this device are discussed. (author). 5 figs., 4 refs.

  14. Practical open source software for libraries

    CERN Document Server

    Engard, Nicole

    2010-01-01

    Open source refers to an application whose source code is made available for use or modification as users see fit. This means libraries gain more flexibility and freedom than with software purchased with license restrictions. Both the open source community and the library world live by the same rules and principles. Practical Open Source Software for Libraries explains the facts and dispels myths about open source. Chapters introduce librarians to open source and what it means for libraries. The reader is provided with links to a toolbox full of freely available open source products to use in

  15. Plasma opening switch studies of the applied Bz diode on the LION accelerator

    International Nuclear Information System (INIS)

    Struckman, C.K.; Kusse, B.R.; Meyerhofer, D.D.; Rondeau, G.

    1988-01-01

    The LION accelerator, 1.5 MV, 4Ω, at Cornell University is being used to study the characteristics of an applied B z , or, barrel diode. A plasma opening switch (POS) has been used to shape the voltage pulse seen by the diode. The results of a series of experiments utilizing a POS are presented. The plasma switch geometry is unique, with the plasma source located inside the center conductor of a coaxial transmission line. The switch region is located between the 17 cm radius anode and the 23 cm radius cathode. The switch is constructed of a flashboard plasma source bent into an azimuthally symmetric ring. The axial length of the plasma is only about 2 cm; which is much smaller than the switch radius. The plasma diffuses into the anode-cathode space through axially oriented slots in the anode. The plasma in the switch region has been characterized during static testing (no generator pulse) using Faraday cups. By using time of flight calculations, the Faraday cups give rough estimates of both the plasma density and velocity. Since the generator pulse is so short (100 ns) these static characterizations are indicative of the plasma when the voltage pulse is present. This low density, fast plasma produced the best results for the diode voltage pulse. Results from recently constructed Langmuir probes are also presented

  16. Generalized Multi-Cell Switched-Inductor and Switched-Capacitor Z-source Inverters

    DEFF Research Database (Denmark)

    Li, Ding; Chiang Loh, Poh; Zhu, Miao

    2013-01-01

    . Their boosting gains are, therefore, limited in practice. To overcome these shortcomings, the generalized switched-inductor and switched-capacitor Z-source inverters are proposed, whose extra boosting abilities and other advantages have already been verified in simulation and experiment....

  17. When to make proprietary software open source

    NARCIS (Netherlands)

    Caulkins, J.P.; Feichtinger, G.; Grass, D.; Hartl, R.F.; Kort, P.M.; Seidl, A.

    Software can be distributed closed source (proprietary) or open source (developed collaboratively). While a firm cannot sell open source software, and so loses potential sales revenue, the open source software development process can have a substantial positive impact on the quality of a software,

  18. Adaptability in IT Sourcing: The Impact of Switching Costs

    Science.gov (United States)

    Whitten, Dwayne

    IT sourcing decisions are increasingly becoming more strategic than in the past. As this occurs, firms should maintain a strategy of adaptability in order to mitigate the risks inherently associated with sourcing. A major influence on the adaptability of a firm in the short- and long-term are the switching costs associated with moving an activity from one source to another. As switching costs increase, firms may be "locked in" to one source. Firms should therefore work to decrease the switching costs so that they are more able to move an activity from one source to another if the market changes or an outsourcing relationship sours. Three strategies are presented for lowering switching costs which will ultimately help increase adaptability.

  19. Fast-opening vacuum switches for high-power inductive energy storage

    International Nuclear Information System (INIS)

    Cooperstein, G.

    1988-01-01

    The subject of fast-opening vacuum switches for high-power inductive energy storage is emerging as an exciting new area of plasma science research. This opening switch technology, which generally involves the use of plasmas as the switching medium, is key to the development of inductive energy storage techniques for pulsed power which have a number of advantages over conventional capacitive techniques with regard to cost and size. This paper reviews the state of the art in this area with emphasis on applications to inductive storage pulsed power generators. Discussion focuses on fast-opening vacuum switches capable of operating at high power (≥10 12 W). These include plasma erosion opening switches, ion beam opening switches, plasma filled diodes, reflex diodes, plasma flow switches, and other novel vacuum opening switches

  20. Open source in Finnish software companies

    OpenAIRE

    Seppä, Arto

    2006-01-01

    This paper explores survey data focusing on open source software supply collected from 170 Finnish software firms using descriptive statistical analysis. The first half of the report contains general data about software companies and the differences between proprietary and open source firms. The second half focuses on open source firms. A subject of analysis are copyrights, products and services supply, the firms’ relationships with the open source community, and their views on opportunities ...

  1. Future of Open Source systems

    Directory of Open Access Journals (Sweden)

    Karel Charvát

    2010-02-01

    Full Text Available Software distribution strategies have many aspects and can be analysed by reviewing different incisions of a strategy. The focus of this paper is on Licensing aspect involves licensing strategy, licensing risks, licensing enforcement costs. Furthermore, by formulating licensing strategy main technical and logistical aspects are predicted also. The key issues of this paper are different business modes for FOSS software and also SWOT analysis of usage and development of FOSS software from point of view of different user groups. This analysis was provided as part of work of Humboldt IP and collaborative@rural IP. Currently this strategy are important issue of members of Czech Centre for Science and Society and WirelessInfo Living Lab, where the models based on dual licensing are key strategy.Keywords: Open Source, Licensing, FOSS base business models. SWOT analysis, Knowledge society, Knowledge economy

  2. Evolution of open source networks in industry

    NARCIS (Netherlands)

    de Laat, P.B.

    2004-01-01

    The open source software movement has become a threat to corporate software development. In response, companies started to develop products and services related to open source software. Subsequently, they also tried to come to terms with the processes that are characteristic of open source software

  3. The HYPE Open Source Community

    Science.gov (United States)

    Strömbäck, Lena; Arheimer, Berit; Pers, Charlotta; Isberg, Kristina

    2013-04-01

    The Hydrological Predictions for the Environment (HYPE) model is a dynamic, semi-distributed, process-based, integrated catchment model (Lindström et al., 2010). It uses well-known hydrological and nutrient transport concepts and can be applied for both small and large scale assessments of water resources and status. In the model, the landscape is divided into classes according to soil type, vegetation and altitude. The soil representation is stratified and can be divided in up to three layers. Water and substances are routed through the same flow paths and storages (snow, soil, groundwater, streams, rivers, lakes) considering turn-over and transformation on the way towards the sea. In Sweden, the model is used by water authorities to fulfil the Water Framework Directive and the Marine Strategy Framework Directive. It is used for characterization, forecasts, and scenario analyses. Model data can be downloaded for free from three different HYPE applications: Europe (www.smhi.se/e-hype), Baltic Sea basin (www.smhi.se/balt-hype), and Sweden (vattenweb.smhi.se) The HYPE OSC (hype.sourceforge.net) is an open source initiative under the Lesser GNU Public License taken by SMHI to strengthen international collaboration in hydrological modelling and hydrological data production. The hypothesis is that more brains and more testing will result in better models and better code. The code is transparent and can be changed and learnt from. New versions of the main code will be delivered frequently. The main objective of the HYPE OSC is to provide public access to a state-of-the-art operational hydrological model and to encourage hydrologic expertise from different parts of the world to contribute to model improvement. HYPE OSC is open to everyone interested in hydrology, hydrological modelling and code development - e.g. scientists, authorities, and consultancies. The HYPE Open Source Community was initiated in November 2011 by a kick-off and workshop with 50 eager participants

  4. Open Source Opens Opportunities for Army's Simulation System

    National Research Council Canada - National Science Library

    Parsons, Douglas J; Wittman, Jr, Robert L

    2005-01-01

    .... Postured as an open-architecture, open-source application, the OneSAF program will put this software into the hands of a vast number of developers throughout the Department of Defense with the intent...

  5. Application of plasma erosion opening switches to high power accelerators for pulse compression and power multiplication

    International Nuclear Information System (INIS)

    Meyer, R.A.; Boller, J.R.; Commisso, R.J.

    1983-01-01

    A new vacuum opening switch called a plasma erosion opening switch is described. A model of its operation is presented and the energy efficiency of such a switch is discussed. Recent high power experiments on the Gamble II accelerator are described and compared to previous experiments

  6. Open Genetic Code: on open source in the life sciences

    OpenAIRE

    Deibel, Eric

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life sciences refers to access, sharing and collaboration as informatic practices. This includes open source as an experimental model and as a more sophisticated approach of genetic engineering. The first ...

  7. Close connections between open science and open-source software

    Directory of Open Access Journals (Sweden)

    YouHua Chen

    2014-09-01

    Full Text Available Open science is increasingly gaining attention in recent years. In this mini-review, we briefly discuss and summarize the reasons of introducing open science into academic publications for scientists. We argue that open-source software (like R and Python software can be the universal and important platforms for doing open science because of their appealing features: open source, easy-reading document, commonly used in various scientific disciplines like statistics, chemistry and biology. At last, the challenges and future perspectives of performing open science are discussed.

  8. Spectroscopic investigation of species separation in opening switch plasmas

    Science.gov (United States)

    Jackson, S. L.; Phipps, D. G.; Richardson, A. S.; Commisso, R. J.; Hinshelwood, D. D.; Murphy, D. P.; Schumer, J. W.; Weber, B. V.; Boyer, C. N.; Doron, R.; Biswas, S.; Maron, Y.

    2015-11-01

    Interactions between magnetic fields and current-carrying plasmas that lead to the separation of plasma species in multi-species plasmas are being studied in a plasma opening switch geometry. Several Marshall guns are used to inject single or multi-species plasmas between coaxial conductors connected to the output of the Naval Research Laboratory's Hawk pulsed-power generator. Following injection of the plasma, the generator is used at roughly half power to apply an electrical pulse with a peak current of 450 kA, a peak voltage of 400 kV, and a rise time of 1.2 μs. The resulting magnetic field interacts with the plasma through a combination of field penetration and magnetohydrodynamic (MHD) pushing that is not well understood but can lead to the separation of plasma species in multi-species plasmas. An ICCD-coupled spectrometer has been used in combination with magnetic probes, a ribbon-beam interferometer, and particle-in-cell (PIC) modeling to diagnose and understand conditions in the plasma from the time it is injected until the end of the conduction phase of the opening switch. This work supported by the Naval Research Laboratory Base Program and the Office of Naval Research.

  9. The Commercial Open Source Business Model

    Science.gov (United States)

    Riehle, Dirk

    Commercial open source software projects are open source software projects that are owned by a single firm that derives a direct and significant revenue stream from the software. Commercial open source at first glance represents an economic paradox: How can a firm earn money if it is making its product available for free as open source? This paper presents the core properties of com mercial open source business models and discusses how they work. Using a commercial open source approach, firms can get to market faster with a superior product at lower cost than possible for traditional competitors. The paper shows how these benefits accrue from an engaged and self-supporting user community. Lacking any prior comprehensive reference, this paper is based on an analysis of public statements by practitioners of commercial open source. It forges the various anecdotes into a coherent description of revenue generation strategies and relevant business functions.

  10. Openly Published Environmental Sensing (OPEnS) | Advancing Open-Source Research, Instrumentation, and Dissemination

    Science.gov (United States)

    Udell, C.; Selker, J. S.

    2017-12-01

    The increasing availability and functionality of Open-Source software and hardware along with 3D printing, low-cost electronics, and proliferation of open-access resources for learning rapid prototyping are contributing to fundamental transformations and new technologies in environmental sensing. These tools invite reevaluation of time-tested methodologies and devices toward more efficient, reusable, and inexpensive alternatives. Building upon Open-Source design facilitates community engagement and invites a Do-It-Together (DIT) collaborative framework for research where solutions to complex problems may be crowd-sourced. However, barriers persist that prevent researchers from taking advantage of the capabilities afforded by open-source software, hardware, and rapid prototyping. Some of these include: requisite technical skillsets, knowledge of equipment capabilities, identifying inexpensive sources for materials, money, space, and time. A university MAKER space staffed by engineering students to assist researchers is one proposed solution to overcome many of these obstacles. This presentation investigates the unique capabilities the USDA-funded Openly Published Environmental Sensing (OPEnS) Lab affords researchers, within Oregon State and internationally, and the unique functions these types of initiatives support at the intersection of MAKER spaces, Open-Source academic research, and open-access dissemination.

  11. Curious exceptions? : open source software and "open" technology

    NARCIS (Netherlands)

    Nuvolari, A.; Rullani, F.; St. Amant, Kirk; Still, Brian

    2007-01-01

    The aim of thts chapter is to explore the differences and commonalities between open source software and other cases of open technology. The concept of open technology is used here to indicate various models of innovation based on the participation of a wide range of different actors who freely

  12. Open Genetic Code : On open source in the life sciences

    NARCIS (Netherlands)

    Deibel, E.

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life

  13. Preliminary studies of the plasma focus as an opening switch

    International Nuclear Information System (INIS)

    Venneri, F.; Gerdin, G.

    1983-01-01

    Sharp current interruption at pinch time suggests the possible application of the plasma focus as an opening switch. Switch impedances on the order of 0.5 ohms or greater would be of interest to pulsed power applications if the rise time for the impedance is sufficiently short. The experimental determination of the magnitude of the plasma focus impedance at pinch time and its nature (R or L) are obviously important in assessing the feasibility of this application. An experimental estimate of the Spitzer resistance of the plasma focus based on soft-X-ray measurements indicates a Spitzer resistance of 9 mΩ. Estimates of resistance based on the maximum particle energy observed 4 (V about E /sub MAX/ /e) and the current at pinch time (R about E /sub MAX/ /eI /sub p/ ) would indicate an effective resistance of about one ohm. Estimates of resistance based on circuit parameters (L, I, q/C) yield about one third of an ohm. To resolve these discrepancies a exclamationBexclamation probe 5 is being developed to get a better estimate of L(t), L(t) and I(t) through spatially resolved measurements. Preliminary results are reported

  14. Operation of a semiconductor opening switch at ultrahigh current densities

    International Nuclear Information System (INIS)

    Lyubutin, S. K.; Rukin, S. N.; Slovikovsky, B. G.; Tsyranov, S. N.

    2012-01-01

    The operation of a semiconductor opening switch (SOS diode) at cutoff current densities of tens of kA/cm 2 is studied. In experiments, the maximum reverse current density reached 43 kA/cm 2 for ∼40 ns. Experimental data on SOS diodes with a p + -p-n-n + structure and a p-n junction depth from 145 to 180 μm are presented. The dynamics of electron-hole plasma in the diode at pumping and current cutoff stages is studied by numerical simulation methods. It is shown that current cutoff is associated with the formation of an electric field region in a thin (∼45 μm) layer of the structure’s heavily doped p-region, in which the acceptor concentration exceeds 10 16 cm −3 , and the current cutoff process depends weakly on the p-n junction depth.

  15. Design of a Command-Triggered Plasma Opening Switch for Terawatt Applications

    International Nuclear Information System (INIS)

    Savage, Mark E.; Mendel, C.W.; Seidel, David B.

    1999-01-01

    Inductive energy storage systems can have high energy density, lending to smaller, less expensive systems. The crucial element of an inductive energy storage system is the opening switch. This switch must conduct current while energy is stored in an inductor, then open quickly to transfer this energy to a load. Plasma can perform this function. The Plasma Opening Switch (POS) has been studied for more than two decades. Success with the conventional plasma opening switch has been limited. A system designed to significantly improve the performance of vacuum opening switches is described in this paper. The gap cleared of plasma is a rough figure-of-merit for vacuum opening switches. Typical opened gaps of 3 mm are reported for conventional switches. The goal for the system described in this paper is more than 3 cm. To achieve this, the command-triggered POS adds an active opening mechanism, which allows complete separation of conduction and opening. This separation is advantageous because of the widely different time scales of conduction and opening. The detrimental process of magnetic field penetration into the plasma during conduction is less important in this switch. The opening mechanism duration is much shorter than the conduction time, so penetration during opening is insignificant. Opening is accomplished with a fast magnetic field that pushes plasma out of the switch region. Plasma must be removed from the switch region to allow high voltage. This paper describes some processes important during conduction and opening, and show calculations on the trigger requirements. The design of the switch is shown. This system is designed to demonstrate both improved performance and nanosecond output jitter at levels greater than one terawatt. An amplification mechanism is described which reduces the trigger energy. Particle-in-cell simulations of the system are also shown

  16. Using Alloy to Formally Model and Reason About an OpenFlow Network Switch

    OpenAIRE

    Mirzaei, Saber; Bahargam, Sanaz; Skowyra, Richard; Kfoury, Assaf; Bestavros, Azer

    2016-01-01

    Openflow provides a standard interface for separating a network into a data plane and a programmatic control plane. This enables easy network reconfiguration, but introduces the potential for programming bugs to cause network effects. To study OpenFlow switch behavior, we used Alloy to create a software abstraction describing the internal state of a network and its OpenFlow switches. This work is an attempt to model the static and dynamic behaviour a network built using OpenFlow switches.

  17. Free for All: Open Source Software

    Science.gov (United States)

    Schneider, Karen

    2008-01-01

    Open source software has become a catchword in libraryland. Yet many remain unclear about open source's benefits--or even what it is. So what is open source software (OSS)? It's software that is free in every sense of the word: free to download, free to use, and free to view or modify. Most OSS is distributed on the Web and one doesn't need to…

  18. Requirements Specification for Open Source Software Selection

    OpenAIRE

    YANG, YING

    2008-01-01

    Open source software has been widely used. The software world is enjoying the advantages of collaboration and cooperation in software development and use with the advent of open source movement. However, little research is concerned about the practical guidelines of OSS selection. It is hard for an organization to make a decision whether they should use the OSS or not, and to select an appropriate one from a number of OSS candidates. This thesis studies how to select an open source software f...

  19. Open source innovation phenomenon, participant behaviour, impact

    CERN Document Server

    Herstatt, Cornelius

    2015-01-01

    Open Source Innovation (OSI) has gained considerable momentum within the last years. Academic and management practice interest grows as more and more end-users consider and even participate in Open Source product development like Linux, Android, or Wikipedia. Open Source Innovation: Phenomenon, Participant Behaviour, Impact brings together rigorous academic research and business importance in scrutinizing OCI from three perspectives: The Phenomenon, Participants' Behavior, and Business Implications. The first section introduces OCI artefacts, including who is participating and why, and provide

  20. Open Source Data Warehousing and Business Intelligence

    CERN Document Server

    Bulusu, Lakshman

    2012-01-01

    Open Source Data Warehousing and Business Intelligence is an all-in-one reference for developing open source based data warehousing (DW) and business intelligence (BI) solutions that are business-centric, cross-customer viable, cross-functional, cross-technology based, and enterprise-wide. Considering the entire lifecycle of an open source DW & BI implementation, its comprehensive coverage spans from basic concepts all the way through to customization. Highlighting the key differences between open source and vendor DW and BI technologies, the book identifies end-to-end solutions that are scala

  1. Free software and open source databases

    Directory of Open Access Journals (Sweden)

    Napoleon Alexandru SIRITEANU

    2006-01-01

    Full Text Available The emergence of free/open source software -FS/OSS- enterprises seeks to push software development out of the academic stream into the commercial mainstream, and as a result, end-user applications such as open source database management systems (PostgreSQL, MySQL, Firebird are becoming more popular. Companies like Sybase, Oracle, Sun, IBM are increasingly implementing open source strategies and porting programs/applications into the Linux environment. Open source software is redefining the software industry in general and database development in particular.

  2. Open-source hardware for medical devices.

    Science.gov (United States)

    Niezen, Gerrit; Eslambolchilar, Parisa; Thimbleby, Harold

    2016-04-01

    Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device.

  3. Open Genetic Code: on open source in the life sciences.

    Science.gov (United States)

    Deibel, Eric

    2014-01-01

    The introduction of open source in the life sciences is increasingly being suggested as an alternative to patenting. This is an alternative, however, that takes its shape at the intersection of the life sciences and informatics. Numerous examples can be identified wherein open source in the life sciences refers to access, sharing and collaboration as informatic practices. This includes open source as an experimental model and as a more sophisticated approach of genetic engineering. The first section discusses the greater flexibly in regard of patenting and the relationship to the introduction of open source in the life sciences. The main argument is that the ownership of knowledge in the life sciences should be reconsidered in the context of the centrality of DNA in informatic formats. This is illustrated by discussing a range of examples of open source models. The second part focuses on open source in synthetic biology as exemplary for the re-materialization of information into food, energy, medicine and so forth. The paper ends by raising the question whether another kind of alternative might be possible: one that looks at open source as a model for an alternative to the commodification of life that is understood as an attempt to comprehensively remove the restrictions from the usage of DNA in any of its formats.

  4. The 2016 Bioinformatics Open Source Conference (BOSC).

    Science.gov (United States)

    Harris, Nomi L; Cock, Peter J A; Chapman, Brad; Fields, Christopher J; Hokamp, Karsten; Lapp, Hilmar; Muñoz-Torres, Monica; Wiencko, Heather

    2016-01-01

    Message from the ISCB: The Bioinformatics Open Source Conference (BOSC) is a yearly meeting organized by the Open Bioinformatics Foundation (OBF), a non-profit group dedicated to promoting the practice and philosophy of Open Source software development and Open Science within the biological research community. BOSC has been run since 2000 as a two-day Special Interest Group (SIG) before the annual ISMB conference. The 17th annual BOSC ( http://www.open-bio.org/wiki/BOSC_2016) took place in Orlando, Florida in July 2016. As in previous years, the conference was preceded by a two-day collaborative coding event open to the bioinformatics community. The conference brought together nearly 100 bioinformatics researchers, developers and users of open source software to interact and share ideas about standards, bioinformatics software development, and open and reproducible science.

  5. OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    McParland, Charles

    2011-02-01

    Demand response (DR) is becoming an increasingly important part of power grid planning and operation. The advent of the Smart Grid, which mandates its use, further motivates selection and development of suitable software protocols to enable DR functionality. The OpenADR protocol has been developed and is being standardized to serve this goal. We believe that the development of a distributable, open source implementation of OpenADR will benefit this effort and motivate critical evaluation of its capabilities, by the wider community, for providing wide-scale DR services

  6. Open data for water-related operational services, the SWITCH-ON approach

    Science.gov (United States)

    Mazzoli, Paolo; Bagli, Stefano; Valerio, Luzzi; Broccoli, Davide; Piccinini, Francesca

    2017-04-01

    Recently, a collaborative project started called SWITCH-ON (EU FP7 project No 603587) coordinated by SMHI (http://water-switch-on.eu/) as part of the contemporary European movement imposed by the INSPIRE directive and the Open Data Strategy. Among It's R&D activities GECOsistema develops and expands inside SWITCH-ON a set of online services to tackle major water related issues, from reservoir and irrigation supply, to hydrological change adaptation and hydropower potential mapping. Here we present major releases of APRIL, HyCAW and High-resolution European HydroPower Atlas; all of which make intense use of open data. APRIL is a tool for seasonal run-off forecasts, that takes advantage of open datasets or low-cost data and performs forecasts through calibrated machine learning algorithms. HyCAW is a wizard that supports the assessment of adaptation options to cope with change in the temporal distribution of water availability as well as in the total water quantity. EU HPA provides all relevant information necessary to appraise the feasibility of a micro-hydropower plant at a specific site, taking into account hydrological as well as technical and economic factors. All the tools share a common vision of the project to address water concerns and currently untapped potential of open data for improved water management across the EU. Users are guided through a Web GIS interface, created using open source Web Mapping Applications, Open-Layers and Map Server, to explore available hydrological information in the area of interest, plot available data, perform analysis, and get reports and statistics.

  7. Repetitive plasma opening switch for powerful high-voltage pulse generators

    International Nuclear Information System (INIS)

    Dolgachev, G.I.; Zakatov, L.P.; Nitishinskii, M.S.; Ushakov, A.G.

    1998-01-01

    Results are presented of experimental studies of plasma opening switches that serve to sharpen the pulses of inductive microsecond high-voltage pulse generators. It is demonstrated that repetitive plasma opening switches can be used to create super-powerful generators operating in a quasi-continuous regime. An erosion switching mechanism and the problem of magnetic insulation in repetitive switches are considered. Achieving super-high peak power in plasma switches makes it possible to develop new types of high-power generators of electron beams and X radiation. Possible implementations and the efficiency of these generators are discussed

  8. Open Science: Open source licenses in scientific research

    OpenAIRE

    Guadamuz, Andres

    2006-01-01

    The article examines the validity of OSS (open source software) licenses for scientific, as opposed to creative works. It draws on examples of OSS licenses to consider their suitability for the scientific community and scientific research.

  9. Defining an Open Source Strategy for NASA

    Science.gov (United States)

    Mattmann, C. A.; Crichton, D. J.; Lindsay, F.; Berrick, S. W.; Marshall, J. J.; Downs, R. R.

    2011-12-01

    Over the course of the past year, we have worked to help frame a strategy for NASA and open source software. This includes defining information processes to understand open source licensing, attribution, commerciality, redistribution, communities, architectures, and interactions within the agency. Specifically we held a training session at the NASA Earth Science Data Systems Working Group meeting in Open Source software as it relates to the NASA Earth Science data systems enterprise, including EOSDIS, the Distributed Active Archive Centers (DAACs), ACCESS proposals, and the MEASURES communities, and efforts to understand how open source software can be both consumed and produced within that ecosystem. In addition, we presented at the 1st NASA Open Source Summit (OSS) and helped to define an agency-level strategy, a set of recommendations and paths forward for how to identify healthy open source communities, how to deal with issues such as contributions originating from other agencies, and how to search out talent with the right skills to develop software for NASA in the modern age. This talk will review our current recommendations for open source at NASA, and will cover the set of thirteen recommendations output from the NASA Open Source Summit and discuss some of their implications for the agency.

  10. Scalable Open Source Smart Grid Simulator (SGSim)

    DEFF Research Database (Denmark)

    Ebeid, Emad Samuel Malki; Jacobsen, Rune Hylsberg; Stefanni, Francesco

    2017-01-01

    . This paper presents an open source smart grid simulator (SGSim). The simulator is based on open source SystemC Network Simulation Library (SCNSL) and aims to model scalable smart grid applications. SGSim has been tested under different smart grid scenarios that contain hundreds of thousands of households...

  11. Open source software development : some historical perspectives

    NARCIS (Netherlands)

    Nuvolari, A.

    2005-01-01

    In this paper we suggest that historical studies of technology can help us to account for some, perplexing (at least for traditional economic reasoning) features of open source software development. From a historical perspective, open source software seems to be a particular case of what Robert C.

  12. Open source software development : some historical perspectives

    NARCIS (Netherlands)

    Nuvolari, A.

    2003-01-01

    In this paper we suggest that historical studies of technology can help us to account for some, perplexing (at least for traditional economic reasoning) features of open source software development. When looked in historical perspective, open source software seems to be a particular case of what

  13. 7 Questions to Ask Open Source Vendors

    Science.gov (United States)

    Raths, David

    2012-01-01

    With their budgets under increasing pressure, many campus IT directors are considering open source projects for the first time. On the face of it, the savings can be significant. Commercial emergency-planning software can cost upward of six figures, for example, whereas the open source Kuali Ready might run as little as $15,000 per year when…

  14. Usability in open source software development

    DEFF Research Database (Denmark)

    Andreasen, M. S.; Nielsen, H. V.; Schrøder, S. O.

    2006-01-01

    Open Source Software (OSS) development has gained significant importance in the production of soft-ware products. Open Source Software developers have produced systems with a functionality that is competitive with similar proprietary software developed by commercial software organizations. Yet OSS...

  15. Intrusion Detection using Open Source Tools

    OpenAIRE

    Jack TIMOFTE

    2008-01-01

    We have witnessed in the recent years that open source tools have gained popularity among all types of users, from individuals or small businesses to large organizations and enterprises. In this paper we will present three open source IDS tools: OSSEC, Prelude and SNORT.

  16. Plasma opening switch development for the Particle Beam Fusion Accelerator II (PBFA II)

    International Nuclear Information System (INIS)

    Stinnett, R.W.; McDaniel, D.H.; Rochau, G.E.

    1987-01-01

    The authors conducted plasma opening switch (POS) experiments on Sandia National Laboratories' new Particle Beam Fusin Accelerator II (PBFA II) (12 MV, 100 TW, 50 ns), on the Supermite accelerator (2 MV, 2 TW, 50 ns) and on the Naval Research Laboratory's Gamble II accelerator (1.8 MV, 1.6 TW, 70 ns). The POS systems on the PBFA II and Supermite accelerators use a newly developed flashboard plasma source to provide the plasma necessary to conduct the large (> 1 MA) currents produced byu these accelerators. In the Supermite experiments, the plasma opening switch conducted currents up to 1 MA before opening in less than 10 ns into an electron beam load. These experiments achieved significant voltage gain relative to the voltage across a matched load. In experiments on Gamble II, power gains of up to 1.7 were achieved using a POS in a strongly coaxial geometry (r/sub outer//r/sub inner/ = 2) with a large magnetic field at the cathode. The POS system on PBFA II is unique because of its size and voltage. This POS system is designed to conduct over 6 MA before opening. In present experiments it has conducted currents of 4-5 MA for over 50 ns

  17. The Efficient Utilization of Open Source Information

    Energy Technology Data Exchange (ETDEWEB)

    Baty, Samuel R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Intelligence and Systems Analysis

    2016-08-11

    These are a set of slides on the efficient utilization of open source information. Open source information consists of a vast set of information from a variety of sources. Not only does the quantity of open source information pose a problem, the quality of such information can hinder efforts. To show this, two case studies are mentioned: Iran and North Korea, in order to see how open source information can be utilized. The huge breadth and depth of open source information can complicate an analysis, especially because open information has no guarantee of accuracy. Open source information can provide key insights either directly or indirectly: looking at supporting factors (flow of scientists, products and waste from mines, government budgets, etc.); direct factors (statements, tests, deployments). Fundamentally, it is the independent verification of information that allows for a more complete picture to be formed. Overlapping sources allow for more precise bounds on times, weights, temperatures, yields or other issues of interest in order to determine capability. Ultimately, a "good" answer almost never comes from an individual, but rather requires the utilization of a wide range of skill sets held by a team of people.

  18. OpenFlow Switching Performance using Network Simulator - 3

    OpenAIRE

    Sriram Prashanth, Naguru

    2016-01-01

    Context. In the present network inventive world, there is a quick expansion of switches and protocols, which are used to cope up with the increase in customer requirement in the networking. With increasing demand for higher bandwidths and lower latency and to meet these requirements new network paths are introduced. To reduce network load in present switching network, development of new innovative switching is required. These required results can be achieved by Software Define Network or Trad...

  19. On the Ambiguity of Commercial Open Source

    Directory of Open Access Journals (Sweden)

    Lucian Luca

    2006-01-01

    Full Text Available . Open source and commercial applications used to be two separate worlds. The former was the work of amateurs who had little interest in making a profit, while the latter was only profit oriented and was produced by big companies. Nowadays open source is a threat and an opportunity to serious businesses of all kinds, generating good profits while delivering low costs products to customers. The competition between commercial and open source software has impacted the industry and the society as a whole. But in the last years, the markets for commercial and open source software are converging rapidly and it is interesting to resume and discuss the implications of this new paradigm, taking into account arguments pro and against it.

  20. Introducing Product Lines through Open Source Tools

    OpenAIRE

    Haugen, Øystein

    2008-01-01

    We present an approach to introducing product lines to companies that lower their initial risk by applying open source tools and a smooth learning curve into the use and creation of domain specific modeling combined with standardized variability modeling.

  1. Deep Learning in Open Source Learning Streams

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This chapter presents research on deep learning in a digital learning environment and raises the question if digital instructional designs can catalyze deeper learning than traditional classroom teaching. As a theoretical point of departure the notion of ‘situated learning’ is utilized...... and contrasted to the notion of functionalistic learning in a digital context. The mechanism that enables deep learning in this context is ‘The Open Source Learning Stream’. ‘The Open Source Learning Stream’ is the notion of sharing ‘learning instances’ in a digital space (discussion board, Facebook group......, unistructural, multistructural or relational learning. The research concludes that ‘The Open Source Learning Stream’ can catalyze deep learning and that there are four types of ‘Open Source Learning streams’; individual/ asynchronous, individual/synchronous, shared/asynchronous and shared...

  2. On Open- source Multi-robot simulators

    CSIR Research Space (South Africa)

    Namoshe, M

    2008-07-01

    Full Text Available Open source software simulators play a major role in robotics design and research as platforms for developing, testing and improving architectures, concepts and algorithms for cooperative/multi-robot systems. Simulation environment enables control...

  3. DKIE: Open Source Information Extraction for Danish

    DEFF Research Database (Denmark)

    Derczynski, Leon; Field, Camilla Vilhelmsen; Bøgh, Kenneth Sejdenfaden

    2014-01-01

    Danish is a major Scandinavian language spoken daily by around six million people. However, it lacks a unified, open set of NLP tools. This demonstration will introduce DKIE, an extensible open-source toolkit for processing Danish text. We implement an information extraction architecture for Danish...

  4. Analysis of open source GIS software

    OpenAIRE

    Božnis, Andrius

    2006-01-01

    GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

  5. Open-Source Java for Teaching Computational Physics

    Science.gov (United States)

    Wolfgang, Christian; Gould, Harvey; Gould, Joshua; Tobochnik, Jan

    2001-11-01

    The switch from procedural to object-oriented (OO) programming has produced dramatic changes in professional software design. OO techniques have not, however, been widely adopted in computational physics. Although most physicists are familiar with procedural languages such as Fortran, few physicists have formal training in computer science and few therefore have made the switch to OO programming. The continued use of procedural languages in education is due, in part, to the lack of up-to-date curricular materials that combine current computational physics research topics with an OO framework. This talk describes an Open-Source curriculum development project to produce such material. Examples will be presented that show how OO techniques can be used to encapsulate the relevant Physics, the analysis, and the associated numerical methods.

  6. Open Source Interoperability: It's More than Technology

    Directory of Open Access Journals (Sweden)

    Dominic Sartorio

    2008-01-01

    Full Text Available The Open Solutions Alliance is a consortium of leading commercial open source vendors, integrators and end users dedicated to the growth of open source based solutions in the enterprise. We believe Linux and other infrastructure software, such as Apache, has become mainstream, and packaged solutions represent the next great growth opportunity. However some unique challenges can temper that opportunity. These challenges include getting the word out about the maturity and enterprise-readiness of those solutions, ensuring interoperability both with each other and with other proprietary and legacy solutions, and ensuring healthy collaboration between vendors and their respective customer and developer communities.

  7. Spaces of Open-source Politics

    DEFF Research Database (Denmark)

    Husted, Emil; Plesner, Ursula

    2017-01-01

    . Inspired by the literature on organizational space, the analysis explores how different organizational spaces configure the party’s process of policy development, thereby adding to our understanding of the relationship between organizational space and political organization. We analyze three different....... Curiously, it seems that physical spaces open up the political process, while digital spaces close it down by fixing meaning. Accordingly, we argue that open-source politics should not be equated with online politics but may be highly dependent on physical spaces. Furthermore, digital spaces may provide......The recent proliferation of Web 2.0 applications and their role in contemporary political life have inspired the coining of the term ‘open-source politics’. This article analyzes how open-source politics is organized in the case of a radical political party in Denmark called The Alternative...

  8. OpenTURNS, an open source uncertainty engineering software

    International Nuclear Information System (INIS)

    Popelin, A.L.; Dufoy, A.

    2013-01-01

    The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

  9. Scaling experiments on plasma opening switches for inductive energy storage applications

    International Nuclear Information System (INIS)

    Boller, J.R.; Commisso, R.J.; Cooperstein, G.

    1983-01-01

    A new type of fast opening switch for use with pulsed power accelerators is examined. This Plasma Opening Switch (POS) utilizes an injected carbon plasma to conduct large currents (circa 1 MA) for up to 100 ns while a vacuum inductor (circa 100 nH) is charged. The switch is then capable of opening on a short (circa 10 ns) timescale and depositing the stored energy into a load impedance. Output pulse widths and power levels are determined by the storage inductance and the load impedance. The switch operation is studied in detail both analytically and experimentally. Experiments are performed at the 5 kJ stored energy level on the Gamble I generator and at the 50 kJ level on the Gamble II generator. Results of both experiments are reported and the scaling of switch operation is discussed

  10. Dynamic behavior of HTSC opening switch models controlled by short over-critical current pulses

    International Nuclear Information System (INIS)

    Agafonov, A.V.; Krastelev, E.G.; Voronin, V.S.

    1999-01-01

    We present results of experimental research of dynamical properties of thin films of YBa 2 Cu 3 O 7 HTSC-switch models under action of short overcritical current pulses to test this method of control of fast high-power opening switches for accelerator applications

  11. Making a Business out of Open Source

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    Marc Fleury, a physicist by training, retired in his thirties after selling the company JBoss, which made an open-source application server, to Red Hat. He will talk about the various business models of open source software. From leveraging available open source software and casual contributions, to on-ramp models and subscription models, various business models have been explored and function. Not all models work for all software fields and business types. He will review those business models in context and survey "state-of-the-art" economic models for open source software production. Speaker Bio: Marc Fleury is the creator of JBoss, an open-source Java application server. Fleury holds a degree in mathematics and a Doctorate in physics from the École Polytechnique in Paris and a Master in Theoretical Physics from the École Normale. He worked in France for Sun Microsystems before moving to the United States where he has worked on various Java projects. Fleury's research interest focused on middleware, a...

  12. Open source tools for fluorescent imaging.

    Science.gov (United States)

    Hamilton, Nicholas A

    2012-01-01

    As microscopy becomes increasingly automated and imaging expands in the spatial and time dimensions, quantitative analysis tools for fluorescent imaging are becoming critical to remove both bottlenecks in throughput as well as fully extract and exploit the information contained in the imaging. In recent years there has been a flurry of activity in the development of bio-image analysis tools and methods with the result that there are now many high-quality, well-documented, and well-supported open source bio-image analysis projects with large user bases that cover essentially every aspect from image capture to publication. These open source solutions are now providing a viable alternative to commercial solutions. More importantly, they are forming an interoperable and interconnected network of tools that allow data and analysis methods to be shared between many of the major projects. Just as researchers build on, transmit, and verify knowledge through publication, open source analysis methods and software are creating a foundation that can be built upon, transmitted, and verified. Here we describe many of the major projects, their capabilities, and features. We also give an overview of the current state of open source software for fluorescent microscopy analysis and the many reasons to use and develop open source methods. Copyright © 2012 Elsevier Inc. All rights reserved.

  13. Open source intelligence, open social intelligence and privacy by design

    OpenAIRE

    Casanovas, Pompeu; Royal Melbourne Institute of Technology (Austràlia). Centre for Applied Social Research

    2014-01-01

    Ponència presentada a European Conference on Social Intelligence (ECSI-2014) OSINT stands for Open Source Intelligence, (O)SI for (Open) Social Intelligence, PbD for Privacy by Design. The CAPER project has built an OSINT solution oriented to the prevention of organized crime. How to balance freedom and security? This position paper describes a way to embed the legal and ethical issues raised by the General Data Reform Package (GDRP) in Europe into this kind of surveillance platforms. It f...

  14. GIT 16: megajoule pulsed generator with plasma opening switch for Z-pinch loads

    International Nuclear Information System (INIS)

    Bugaev, S.P.; Volkov, A.M.; Kim, A.A.

    1997-01-01

    Megajoule complex GIT 16 reserved for perfecting technology of forming powerful impulse with the help of intermediate inductive storage and break contact in the form of plasma opening switches and for investigating of irradiating loading of Z-pinch type is presented. The characteristics of isolated complex elements are given and basic results characterizing microsecond plasma opening switches at the current level of same M A are described

  15. Pioneering SESAME light source officially opened

    CERN Multimedia

    Caraban Gonzalez, Noemi

    2017-01-01

    Allan, Jordan, 16 May 2017. The SESAME light source was today officially opened by His Majesty King Abdullah II. An intergovernmental organization, SESAME is the first regional laboratory for the Middle East and neighbouring regions The laboratory’s official opening ushers in a new era of research covering fields ranging from medicine and biology, through materials science, physics and chemistry to healthcare, the environment, agriculture and archaeology.

  16. Open Source Approach to Project Management Tools

    Directory of Open Access Journals (Sweden)

    Romeo MARGEA

    2011-01-01

    Full Text Available Managing large projects involving different groups of people and complex tasks can be challenging. The solution is to use Project management software, which allows a more efficient management of projects. However, famous project management systems can be costly and may require expensive custom servers. Even if free software is not as complex as Microsoft Project, is noteworthy to think that not all projects need all the features, amenities and power of such systems. There are free and open source software alternatives that meet the needs of most projects, and that allow Web access based on different platforms and locations. A starting stage in adopting an OSS in-house is finding and identifying existing open source solution. In this paper we present an overview of Open Source Project Management Software (OSPMS based on articles, reviews, books and developers’ web sites, about those that seem to be the most popular software in this category.

  17. Open Source in Canada's Public Sector

    Directory of Open Access Journals (Sweden)

    Evan Leibovitch

    2008-03-01

    Full Text Available The story of the growth of open source use in Canada has been far more a matter of evolution than revolution, so quiet in its pace that its progress has been difficult to measure. This has posed many challenges to Canadian open source advocates in their efforts to ensure that their country does not lag behind the rest of the world in understanding the social and business benefits open source provides. Perhaps some of the leading soldiers in the trenches might be our civil servants who protect the public purse. In addition to managing and minimizing the costs of delivering necessary services, public sector projects should also advance the social good through the delicate balance of transparency and efficiency.

  18. Open Source Information in Support of Safeguards

    International Nuclear Information System (INIS)

    Christopher, G.

    2015-01-01

    Open source techniques are an increasingly important tool for in safeguards. From social networking sites, such as Linkedin, to B2B portals like Alibaba, there are large open source databases that touch all aspects of the nuclear fuel cycle, from goods to scientists. This is in addition to the wealth of more traditional open source tools such as search engines. In this paper we focus on the potential of B2B sites to provide dual use goods for use in the nuclear fuel cycle. We will discuss the availability of these items as well as the frequency and content of tenders. As many of the largest sites—by traffic and content—are in Asia we will examine the potential of these sites to provide goods used in the nuclear fuel cycle. (author)

  19. Developing Open Source System Expertise in Europe

    DEFF Research Database (Denmark)

    Nyborg, Mads; Gustafsson, Finn; Christensen, Jørgen Erik

    2011-01-01

    programme (IP). The aim of this IP is to exchange knowledge of and experience in local methods and techniques in the field of open source software knowledge in ICT by engaging a group of international students and lecturers in a joint, explorative investigation of contemporary methods of open...... are interested in knowing which factors play a role in information systems and what the similarities and differences between the various national approaches in open source software systems and techniques are. The event forms a unique opportunity in promoting active learning in an international environment...... source software systems. In addition the program focuses on the students learning interpersonal skills, such as personal and professional skills, multidisciplinary teamwork, communication, communication in a foreign language and leadership. The target group consists of European engineering students who...

  20. Cost Optimization Through Open Source Software

    Directory of Open Access Journals (Sweden)

    Mark VonFange

    2010-12-01

    Full Text Available The cost of information technology (IT as a percentage of overall operating and capital expenditures is growing as companies modernize their operations and as IT becomes an increasingly indispensable part of company resources. The price tag associated with IT infrastructure is a heavy one, and, in today's economy, companies need to look for ways to reduce overhead while maintaining quality operations and staying current with technology. With its advancements in availability, usability, functionality, choice, and power, free/libre open source software (F/LOSS provides a cost-effective means for the modern enterprise to streamline its operations. iXsystems wanted to quantify the benefits associated with the use of open source software at their company headquarters. This article is the outgrowth of our internal analysis of using open source software instead of commercial software in all aspects of company operations.

  1. Developing a Successful Open Source Training Model

    Directory of Open Access Journals (Sweden)

    Belinda Lopez

    2010-01-01

    Full Text Available Training programs for open source software provide a tangible, and sellable, product. A successful training program not only builds revenue, it also adds to the overall body of knowledge available for the open source project. By gathering best practices and taking advantage of the collective expertise within a community, it may be possible for a business to partner with an open source project to build a curriculum that promotes the project and supports the needs of the company's training customers. This article describes the initial approach used by Canonical, the commercial sponsor of the Ubuntu Linux operating system, to engage the community in the creation of its training offerings. We then discuss alternate curriculum creation models and some of the conditions that are necessary for successful collaboration between creators of existing documentation and commercial training providers.

  2. Web accessibility and open source software.

    Science.gov (United States)

    Obrenović, Zeljko

    2009-07-01

    A Web browser provides a uniform user interface to different types of information. Making this interface universally accessible and more interactive is a long-term goal still far from being achieved. Universally accessible browsers require novel interaction modalities and additional functionalities, for which existing browsers tend to provide only partial solutions. Although functionality for Web accessibility can be found as open source and free software components, their reuse and integration is complex because they were developed in diverse implementation environments, following standards and conventions incompatible with the Web. To address these problems, we have started several activities that aim at exploiting the potential of open-source software for Web accessibility. The first of these activities is the development of Adaptable Multi-Interface COmmunicator (AMICO):WEB, an infrastructure that facilitates efficient reuse and integration of open source software components into the Web environment. The main contribution of AMICO:WEB is in enabling the syntactic and semantic interoperability between Web extension mechanisms and a variety of integration mechanisms used by open source and free software components. Its design is based on our experiences in solving practical problems where we have used open source components to improve accessibility of rich media Web applications. The second of our activities involves improving education, where we have used our platform to teach students how to build advanced accessibility solutions from diverse open-source software. We are also partially involved in the recently started Eclipse projects called Accessibility Tools Framework (ACTF), the aim of which is development of extensible infrastructure, upon which developers can build a variety of utilities that help to evaluate and enhance the accessibility of applications and content for people with disabilities. In this article we briefly report on these activities.

  3. An Evolving Worldview: Making Open Source Easy

    Science.gov (United States)

    Rice, Z.

    2017-12-01

    NASA Worldview is an interactive interface for browsing full-resolution, global satellite imagery. Worldview supports an open data policy so that academia, private industries and the general public can use NASA's satellite data to address Earth science related issues. Worldview was open sourced in 2014. By shifting to an open source approach, the Worldview application has evolved to better serve end-users. Project developers are able to have discussions with end-users and community developers to understand issues and develop new features. Community developers are able to track upcoming features, collaborate on them and make their own contributions. Developers who discover issues are able to address those issues and submit a fix. This reduces the time it takes for a project developer to reproduce an issue or develop a new feature. Getting new developers to contribute to the project has been one of the most important and difficult aspects of open sourcing Worldview. After witnessing potential outside contributors struggle, a focus has been made on making the installation of Worldview simple to reduce the initial learning curve and make contributing code easy. One way we have addressed this is through a simplified setup process. Our setup documentation includes a set of prerequisites and a set of straightforward commands to clone, configure, install and run. This presentation will emphasize our focus to simplify and standardize Worldview's open source code so that more people are able to contribute. The more people who contribute, the better the application will become over time.

  4. ADAPTING OPEN-SOURCE SOFTWARE FOR ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Bogdan MICU GHILIC

    2013-06-01

    Full Text Available Low developed companies do not use ERP solutions for resource management, they don't have CRM systems for tracking customers, online presence is low and consequently they are selling low volumes. Their work does not generate enough capital to buy specialized software and the local community is too small to create open-source software for them.When adapting an open-source enterprise solution, from a certain level of integration, it is necessary to align to the Romanian legislation. For this you need more than a simple translation. For example, in accounting, the Romanian chart of accounts should be used, the local fiscal calendar, the rules of the Romanian legislation and the specific identifiers for Romanian companies. The solution: Open source applications can be localized. A small community cannot create complex system starting from nothing, but they can adapt existing ones already created and used all over the world. Given the individual characteristics of the Romanian market, open source ERP, CM and e-commerce will be integrated by specialized consultancy agency in Romania just as is done in France (Compiere, Spain (Openbravo, Belgium (OpenERP or the United States (Apache oFBiz. This will not generate license costs for the companies, only the expenses for hardware and implementation consultancy. If we can create a common infrastructure, hardware cost will be waived for cloud SaaS offering, in opposition with the on-premise option.

  5. DEIMOS – an Open Source Image Database

    Directory of Open Access Journals (Sweden)

    M. Blazek

    2011-12-01

    Full Text Available The DEIMOS (DatabasE of Images: Open Source is created as an open-source database of images and videos for testing, verification and comparing of various image and/or video processing techniques such as enhancing, compression and reconstruction. The main advantage of DEIMOS is its orientation to various application fields – multimedia, television, security, assistive technology, biomedicine, astronomy etc. The DEIMOS is/will be created gradually step-by-step based upon the contributions of team members. The paper is describing basic parameters of DEIMOS database including application examples.

  6. The Spaces of Open-Source Politics

    DEFF Research Database (Denmark)

    Husted, Emil; Plesner, Ursula

    The recent proliferation of Web 2.0 technologies and their role in contemporary political life has inspired the coining of the term ‘open-source politics’. This article analyzes how open-source politics is organized in the case of a young radical political party called The Alternative. Inspired...... processes, but may provide both closure and disconnection between the party’s universal body and its particular body. In conclusion, we propose that such a disconnection might be a precondition for success when institutionalizing radical politics, as it allows parties like The Alternative to maintain...

  7. OSIRIX: open source multimodality image navigation software

    Science.gov (United States)

    Rosset, Antoine; Pysher, Lance; Spadola, Luca; Ratib, Osman

    2005-04-01

    The goal of our project is to develop a completely new software platform that will allow users to efficiently and conveniently navigate through large sets of multidimensional data without the need of high-end expensive hardware or software. We also elected to develop our system on new open source software libraries allowing other institutions and developers to contribute to this project. OsiriX is a free and open-source imaging software designed manipulate and visualize large sets of medical images: http://homepage.mac.com/rossetantoine/osirix/

  8. Open Data, Open Source and Open Standards in chemistry: The Blue Obelisk five years on

    Science.gov (United States)

    2011-01-01

    Background The Blue Obelisk movement was established in 2005 as a response to the lack of Open Data, Open Standards and Open Source (ODOSOS) in chemistry. It aims to make it easier to carry out chemistry research by promoting interoperability between chemistry software, encouraging cooperation between Open Source developers, and developing community resources and Open Standards. Results This contribution looks back on the work carried out by the Blue Obelisk in the past 5 years and surveys progress and remaining challenges in the areas of Open Data, Open Standards, and Open Source in chemistry. Conclusions We show that the Blue Obelisk has been very successful in bringing together researchers and developers with common interests in ODOSOS, leading to development of many useful resources freely available to the chemistry community. PMID:21999342

  9. Pulsed power opening switch research at the University of New Mexico

    International Nuclear Information System (INIS)

    Humphries, S. Jr.

    1987-01-01

    Opening switch research at the University of New Mexico (UNM) is directed toward moderate-current (--10 kA) devices with potential applications to high-power charged particle accelerators. Two devices with the capacity for controlling gigawatt high-voltage circuits, the grid-controlled plasma flow switch and the scanned-beam switch, are under investigation. Both switches are conceptually simple; they involve little collective physics and are within the capabilities of current technology. In the plasma flow switch, the flux of electrons into a high-voltage power gap is controlled by a low-voltage control grid. Plasma generation is external to, and independent of, the power circuit. In the closed phase, plasma fills the gap so that the switch has a low on-state impedance. Pulse repetition rates in the megahertz range should be feasible. In single-shot proof-of-principle experiments, a small area switch modulated a 3-MW circuit; a 20-ns opening time was observed. The scanned-beam switch will utilize electric field deflection to direct the power of a sheet electron beam. The beam is to be alternately scanned to two inverse diodes connected to output transmission lines. The switch is expected to generate continuous-wave pulse trains for applications such as high-frequency induction linacs. Theoretical studies indicate that 10-GW devices in the 100-MHz range with 70-percent efficiency should be technologically feasible

  10. The SAMI2 Open Source Project

    Science.gov (United States)

    Huba, J. D.; Joyce, G.

    2001-05-01

    In the past decade, the Open Source Model for software development has gained popularity and has had numerous major achievements: emacs, Linux, the Gimp, and Python, to name a few. The basic idea is to provide the source code of the model or application, a tutorial on its use, and a feedback mechanism with the community so that the model can be tested, improved, and archived. Given the success of the Open Source Model, we believe it may prove valuable in the development of scientific research codes. With this in mind, we are `Open Sourcing' the low to mid-latitude ionospheric model that has recently been developed at the Naval Research Laboratory: SAMI2 (Sami2 is Another Model of the Ionosphere). The model is comprehensive and uses modern numerical techniques. The structure and design of SAMI2 make it relatively easy to understand and modify: the numerical algorithms are simple and direct, and the code is reasonably well-written. Furthermore, SAMI2 is designed to run on personal computers; prohibitive computational resources are not necessary, thereby making the model accessible and usable by virtually all researchers. For these reasons, SAMI2 is an excellent candidate to explore and test the open source modeling paradigm in space physics research. We will discuss various topics associated with this project. Research supported by the Office of Naval Research.

  11. Open Source, Open Standards, and Health Care Information Systems

    Science.gov (United States)

    2011-01-01

    Recognition of the improvements in patient safety, quality of patient care, and efficiency that health care information systems have the potential to bring has led to significant investment. Globally the sale of health care information systems now represents a multibillion dollar industry. As policy makers, health care professionals, and patients, we have a responsibility to maximize the return on this investment. To this end we analyze alternative licensing and software development models, as well as the role of standards. We describe how licensing affects development. We argue for the superiority of open source licensing to promote safer, more effective health care information systems. We claim that open source licensing in health care information systems is essential to rational procurement strategy. PMID:21447469

  12. Open-switch fault detection method of an NPC converter for wind turbine systems

    DEFF Research Database (Denmark)

    Lee, June-Seok; Lee, Kyo-Beum; Blaabjerg, Frede

    2013-01-01

    In wind turbine generation (WTG) systems, the neutral-point-clamped (NPC) topology is widely used as the part of a back-to-back converter since the three-level NPC topology has more advantages than the conventional two-level inverter especially for high power. There are twelve switches in the NPC......-switch detection method of the NPC converter is different from that of the NPC inverter due to the different current paths of the NPC converter. This paper proposes the open-switch fault detection method of the NPC converter connected the permanent-magnet synchronous generator (PMSG). Moreover, the open...

  13. Two dimensional Hall MHD modeling of a plasma opening switch with density inhomogeneities

    Energy Technology Data Exchange (ETDEWEB)

    Zabaidullin, O [Kurchatov Institute, Moscow (Russian Federation); Chuvatin, A; Etlicher, B [Ecole Polytechnique, Palaiseau (France). Laboratoire de Physique des Milieux Ionises

    1997-12-31

    The results of two-dimensional numerical modeling of the Plasma Opening Switch in the MHD framework with Hall effect are presented. An enhanced Hall diffusion coefficient was used in the simulations. Recent experiments justify the application of this approach. The result of the modeling also correlates better with the experiment than in the case of the classical diffusion coefficient. Numerically generated pictures propose a switching scenario in which the translation between the conduction and opening phases can be explained by an abrupt `switching on` and further domination of the Hall effect at the end of the conduction phase. (author). 3 figs., 6 refs.

  14. Design and construction of the advanced photon source 352-MHz rf system switching control

    International Nuclear Information System (INIS)

    Horan, D.; Solita, L.; Reigle, D.; Dimonte, N.

    1997-01-01

    A switching control system has been designed and built to provide the capability of rapidly switching the waveguide and low-level cabling between different klystrons to operate the Advanced Photon Source storage ring in the event of a failure of a klystron system or to perform necessary repairs and preventative maintenance. The twelve possible modes of operation allow for complete redundancy of the booster synchrotron rf system and either a maximum of two storage ring rf systems to be completely off-line or one system to be used as a power source for an rf test stand. A programmable controller is used to send commands to intermediate control panels which interface to WR2300 waveguide switches and phase shifters, rf cavity interlock and low-level rf distribution systems, and klystron power supply controls for rapid reconfiguration of the rf systems in response to a mode-selection command. Mode selection is a local manual operation using a keyswitch arrangement which prevents more than one mode from being selected at a time. The programmable controller also monitors for hardware malfunction and guards against open-quotes hot-switchingclose quotes of the rf systems. The rf switching controls system is monitored via the Experimental Physics and Industrial Control System (EPICS) for remote system status check

  15. Web Server Security on Open Source Environments

    Science.gov (United States)

    Gkoutzelis, Dimitrios X.; Sardis, Manolis S.

    Administering critical resources has never been more difficult that it is today. In a changing world of software innovation where major changes occur on a daily basis, it is crucial for the webmasters and server administrators to shield their data against an unknown arsenal of attacks in the hands of their attackers. Up until now this kind of defense was a privilege of the few, out-budgeted and low cost solutions let the defender vulnerable to the uprising of innovating attacking methods. Luckily, the digital revolution of the past decade left its mark, changing the way we face security forever: open source infrastructure today covers all the prerequisites for a secure web environment in a way we could never imagine fifteen years ago. Online security of large corporations, military and government bodies is more and more handled by open source application thus driving the technological trend of the 21st century in adopting open solutions to E-Commerce and privacy issues. This paper describes substantial security precautions in facing privacy and authentication issues in a totally open source web environment. Our goal is to state and face the most known problems in data handling and consequently propose the most appealing techniques to face these challenges through an open solution.

  16. Open Source Software and the Intellectual Commons.

    Science.gov (United States)

    Dorman, David

    2002-01-01

    Discusses the Open Source Software method of software development and its relationship to control over information content. Topics include digital library resources; reference services; preservation; the legal and economic status of information; technical standards; access to digital data; control of information use; and copyright and patent laws.…

  17. Scribus – Open Source Desktop Publishing

    Directory of Open Access Journals (Sweden)

    Christoph Kaindel

    2010-12-01

    Full Text Available Professionelle Layout-Programme wie Quark XPress oder Adobe InDesign sind unerschwinglich teuer und daher im privaten oder Schulbereich kaum legal verfügbar. Das Open Source Programm Scribus stellt hier eine brauchbare Alternative dar.

  18. Communal Resources in Open Source Software Development

    Science.gov (United States)

    Spaeth, Sebastian; Haefliger, Stefan; von Krogh, Georg; Renzl, Birgit

    2008-01-01

    Introduction: Virtual communities play an important role in innovation. The paper focuses on the particular form of collective action in virtual communities underlying as Open Source software development projects. Method: Building on resource mobilization theory and private-collective innovation, we propose a theory of collective action in…

  19. Open-Source Syringe Pump Library

    Science.gov (United States)

    Wijnen, Bas; Hunt, Emily J.; Anzalone, Gerald C.; Pearce, Joshua M.

    2014-01-01

    This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications. PMID:25229451

  20. System level modelling with open source tools

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Koefoed; Madsen, Jan; Niaki, Seyed Hosein Attarzadeh

    , called ForSyDe. ForSyDe is available under the open Source approach, which allows small and medium enterprises (SME) to get easy access to advanced modeling capabilities and tools. We give an introduction to the design methodology through the system level modeling of a simple industrial use case, and we...

  1. Intrinsic Motivation in Open Source Software Development

    DEFF Research Database (Denmark)

    Bitzer, J.; W., Schrettl,; Schröder, Philipp

    2004-01-01

    This papers sheds light on the puzzling evidence that even though open source software (OSS) is a public good, it is developed for free by highly qualified, young and motivated individuals, and evolves at a rapid pace. We show that once OSS development is understood as the private provision...

  2. Crime analysis using open source information

    DEFF Research Database (Denmark)

    Nizamani, Sarwat; Memon, Nasrullah; Shah, Azhar Ali

    2015-01-01

    In this paper, we present a method of crime analysis from open source information. We employed un-supervised methods of data mining to explore the facts regarding the crimes of an area of interest. The analysis is based on well known clustering and association techniques. The results show...

  3. Open source software migration: Best practices

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2010-09-01

    Full Text Available Open source software (OSS) has gained prominence worldwide, largely due to cost savings and security considerations. This has caused a change in the IT sector and has led to the migration of desktops from proprietary to OSS. The problem...

  4. CONTENT MANAGEMENT SYSTEMS (CMS OPEN SOURCE WEBSITES

    Directory of Open Access Journals (Sweden)

    Marinela Lăzărică

    2013-01-01

    Full Text Available Firms need flexible software applications, which may be adaptable to dynamic changes of the modern business environment; they also need more control over their software costs, security and trust in purchased and implemented software. Moreover, they need to be free of individual software vendors and license costs for the software, etc. The solution of this problem consisted in open source applications and open source technology has proven that it can often provide high-quality software being a challenge for old models of software development and maintenance. The first content management system was announced in the late 90s. The offer of such software systems is varied and each of them has its own characteristics. This requires a comparative analysis of viable open-source systems in order to choose the most appropriate imposed goals. In this context, the paper illustrates the use of an open source content management system, like WordPress, to develop a content site in design of websites and analyzeits characteristics.

  5. Editorial: Humanitarian Open Source (December 2010

    Directory of Open Access Journals (Sweden)

    Leslie Hawthorn

    2010-11-01

    Full Text Available In recent years, our increasingly connected world has provided us with a greater understanding of the needs of our fellow global citizens. The devastating worldwide impact of natural disasters, disease, and poverty has been raised in our collective awareness and our ability to collectively alleviate this suffering has been brought to the fore. While many of us are familiar with donating our funds to better the lives of those less fortunate than ourselves, it is often easy to overlook a core component of facing these global challenges: information technology. The humanitarian open source movement seeks to ameliorate these sufferings through the creation of IT infrastructure to support a wide array of goals for the public good, such as providing effective healthcare or microloans to the poorest of the poor. Achieving these goals requires a sophisticated set of software and hardware tools, all of which work to save and improve lives in some of the most difficult of situations where the availability of electricity, data, IT knowledge, etc. may be low or lacking altogether. It should come as no surprise that the humanitarian open source domain attracts a great deal of attention from software developers, engineers, and others who find that they are able to both solve intense technical challenges while helping to improve the lives of others. However, to support ongoing humanitarian needs, the communities who produce humanitarian free and open source software (HFOSS and hardware have increasingly identified the need for business models to support their efforts. While the lower cost of using open source software and hardware solutions means that more funds can be directed to aid and comfort those in need, the goodwill of developer communities and the funds of grantees alone cannot grow the ecosystem sufficiently to meet ever-growing global needs. To face these challenges - poverty, global health crises, disaster relief, etc. - humanitarian open source

  6. Plasma erosion opening switch in the double-pulse operation mode of a high-current electron accelerator

    International Nuclear Information System (INIS)

    Isakov, I.F.; Lopatin, V.S.; Remnev, G.E.

    1987-01-01

    This paper reports the results of investigations of the operation of a fast current opening switch, with a 10/sup 13/-10/sup 16/ plasma density produced either by dielectric surface flashover or by explosive emission of graphite. A series of two pulses was applied to two diodes in parallel. The first pulse produced plasma in the first diode which closed that diode gap by the arrival time of the second pulse. The first, shorted, diode then acted as an erosion switch for the second pulse. A factor of 2.5-3 power multiplication was obtained under optimum conditions. The opening-switch resistance during the magnetic insulation phase, neglecting the electron losses between the switch and the generating diode, exceeded 100 Ω. The duration of the rapid opening phase was less than 5 ns under optimum conditions. This method of plasma production does not require external plasma sources, and permits a wide variation of plasma density, which in turn allows high inductor currents and stored energies

  7. Balmorel open source energy system model

    DEFF Research Database (Denmark)

    Wiese, Frauke; Bramstoft, Rasmus; Koduvere, Hardi

    2018-01-01

    As the world progresses towards a cleaner energy future with more variable renewable energy sources, energy system models are required to deal with new challenges. This article describes design, development and applications of the open source energy system model Balmorel, which is a result...... of a long and fruitful cooperation between public and private institutions within energy system research and analysis. The purpose of the article is to explain the modelling approach, to highlight strengths and challenges of the chosen approach, to create awareness about the possible applications...... of Balmorel as well as to inspire to new model developments and encourage new users to join the community. Some of the key strengths of the model are the flexible handling of the time and space dimensions and the combination of operation and investment optimisation. Its open source character enables diverse...

  8. Open source laboratory sample rotator mixer and shaker

    Directory of Open Access Journals (Sweden)

    Karankumar C. Dhankani

    2017-04-01

    Full Text Available An open-source 3-D printable laboratory sample rotator mixer is developed here in two variants that allow users to opt for the level of functionality, cost saving and associated complexity needed in their laboratories. First, a laboratory sample rotator is designed and demonstrated that can be used for tumbling as well as gentle mixing of samples in a variety of tube sizes by mixing them horizontally, vertically, or any position in between. Changing the mixing angle is fast and convenient and requires no tools. This device is battery powered and can be easily transported to operate in various locations in a lab including desktops, benches, clean hoods, chemical hoods, cold rooms, glove boxes, incubators or biological hoods. Second, an on-board Arduino-based microcontroller is incorporated that adds the functionality of a laboratory sample shaker. These devices can be customized both mechanically and functionally as the user can simply select the operation mode on the switch or alter the code to perform custom experiments. The open source laboratory sample rotator mixer can be built by non-specialists for under US$30 and adding shaking functionality can be done for under $20 more. Thus, these open source devices are technically superior to the proprietary commercial equipment available on the market while saving over 90% of the costs.

  9. Measuring Modularity in Open Source Code Bases

    Directory of Open Access Journals (Sweden)

    Roberto Milev

    2009-03-01

    Full Text Available Modularity of an open source software code base has been associated with growth of the software development community, the incentives for voluntary code contribution, and a reduction in the number of users who take code without contributing back to the community. As a theoretical construct, modularity links OSS to other domains of research, including organization theory, the economics of industry structure, and new product development. However, measuring the modularity of an OSS design has proven difficult, especially for large and complex systems. In this article, we describe some preliminary results of recent research at Carleton University that examines the evolving modularity of large-scale software systems. We describe a measurement method and a new modularity metric for comparing code bases of different size, introduce an open source toolkit that implements this method and metric, and provide an analysis of the evolution of the Apache Tomcat application server as an illustrative example of the insights gained from this approach. Although these results are preliminary, they open the door to further cross-discipline research that quantitatively links the concerns of business managers, entrepreneurs, policy-makers, and open source software developers.

  10. OpenFOAM: Open source CFD in research and industry

    Science.gov (United States)

    Jasak, Hrvoje

    2009-12-01

    The current focus of development in industrial Computational Fluid Dynamics (CFD) is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries ofpractical engineering use in "non-traditional " areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM) developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form ofpartial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  11. OpenFOAM: Open source CFD in research and industry

    Directory of Open Access Journals (Sweden)

    Hrvoje Jasak

    2009-12-01

    Full Text Available The current focus of development in industrial Computational Fluid Dynamics (CFD is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries of practical engineering use in “non-traditional” areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form of partial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  12. Open Access, Open Source and Digital Libraries: A Current Trend in University Libraries around the World

    Science.gov (United States)

    Krishnamurthy, M.

    2008-01-01

    Purpose: The purpose of this paper is to describe the open access and open source movement in the digital library world. Design/methodology/approach: A review of key developments in the open access and open source movement is provided. Findings: Open source software and open access to research findings are of great use to scholars in developing…

  13. From open source communications to knowledge

    Science.gov (United States)

    Preece, Alun; Roberts, Colin; Rogers, David; Webberley, Will; Innes, Martin; Braines, Dave

    2016-05-01

    Rapid processing and exploitation of open source information, including social media sources, in order to shorten decision-making cycles, has emerged as an important issue in intelligence analysis in recent years. Through a series of case studies and natural experiments, focussed primarily upon policing and counter-terrorism scenarios, we have developed an approach to information foraging and framing to inform decision making, drawing upon open source intelligence, in particular Twitter, due to its real-time focus and frequent use as a carrier for links to other media. Our work uses a combination of natural language (NL) and controlled natural language (CNL) processing to support information collection from human sensors, linking and schematising of collected information, and the framing of situational pictures. We illustrate the approach through a series of vignettes, highlighting (1) how relatively lightweight and reusable knowledge models (schemas) can rapidly be developed to add context to collected social media data, (2) how information from open sources can be combined with reports from trusted observers, for corroboration or to identify con icting information; and (3) how the approach supports users operating at or near the tactical edge, to rapidly task information collection and inform decision-making. The approach is supported by bespoke software tools for social media analytics and knowledge management.

  14. Open Source GIS based integrated watershed management

    Science.gov (United States)

    Byrne, J. M.; Lindsay, J.; Berg, A. A.

    2013-12-01

    Optimal land and water management to address future and current resource stresses and allocation challenges requires the development of state-of-the-art geomatics and hydrological modelling tools. Future hydrological modelling tools should be of high resolution, process based with real-time capability to assess changing resource issues critical to short, medium and long-term enviromental management. The objective here is to merge two renowned, well published resource modeling programs to create an source toolbox for integrated land and water management applications. This work will facilitate a much increased efficiency in land and water resource security, management and planning. Following an 'open-source' philosophy, the tools will be computer platform independent with source code freely available, maximizing knowledge transfer and the global value of the proposed research. The envisioned set of water resource management tools will be housed within 'Whitebox Geospatial Analysis Tools'. Whitebox, is an open-source geographical information system (GIS) developed by Dr. John Lindsay at the University of Guelph. The emphasis of the Whitebox project has been to develop a user-friendly interface for advanced spatial analysis in environmental applications. The plugin architecture of the software is ideal for the tight-integration of spatially distributed models and spatial analysis algorithms such as those contained within the GENESYS suite. Open-source development extends knowledge and technology transfer to a broad range of end-users and builds Canadian capability to address complex resource management problems with better tools and expertise for managers in Canada and around the world. GENESYS (Generate Earth Systems Science input) is an innovative, efficient, high-resolution hydro- and agro-meteorological model for complex terrain watersheds developed under the direction of Dr. James Byrne. GENESYS is an outstanding research and applications tool to address

  15. Wavelet Entropy-Based Traction Inverter Open Switch Fault Diagnosis in High-Speed Railways

    Directory of Open Access Journals (Sweden)

    Keting Hu

    2016-03-01

    Full Text Available In this paper, a diagnosis plan is proposed to settle the detection and isolation problem of open switch faults in high-speed railway traction system traction inverters. Five entropy forms are discussed and compared with the traditional fault detection methods, namely, discrete wavelet transform and discrete wavelet packet transform. The traditional fault detection methods cannot efficiently detect the open switch faults in traction inverters because of the low resolution or the sudden change of the current. The performances of Wavelet Packet Energy Shannon Entropy (WPESE, Wavelet Packet Energy Tsallis Entropy (WPETE with different non-extensive parameters, Wavelet Packet Energy Shannon Entropy with a specific sub-band (WPESE3,6, Empirical Mode Decomposition Shannon Entropy (EMDESE, and Empirical Mode Decomposition Tsallis Entropy (EMDETE with non-extensive parameters in detecting the open switch fault are evaluated by the evaluation parameter. Comparison experiments are carried out to select the best entropy form for the traction inverter open switch fault detection. In addition, the DC component is adopted to isolate the failure Isolated Gate Bipolar Transistor (IGBT. The simulation experiments show that the proposed plan can diagnose single and simultaneous open switch faults correctly and timely.

  16. Building Energy Management Open Source Software

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-20

    This is the repository for Building Energy Management Open Source Software (BEMOSS), which is an open source operating system that is engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. BEMOSS offers the following key features: (1) Open source, open architecture – BEMOSS is an open source operating system that is built upon VOLTTRON – a distributed agent platform developed by Pacific Northwest National Laboratory (PNNL). BEMOSS was designed to make it easy for hardware manufacturers to seamlessly interface their devices with BEMOSS. Software developers can also contribute to adding additional BEMOSS functionalities and applications. (2) Plug & play – BEMOSS was designed to automatically discover supported load controllers (including smart thermostats, VAV/RTUs, lighting load controllers and plug load controllers) in commercial buildings. (3) Interoperability – BEMOSS was designed to work with load control devices form different manufacturers that operate on different communication technologies and data exchange protocols. (4) Cost effectiveness – Implementation of BEMOSS deemed to be cost-effective as it was built upon a robust open source platform that can operate on a low-cost single-board computer, such as Odroid. This feature could contribute to its rapid deployment in small- or medium-sized commercial buildings. (5) Scalability and ease of deployment – With its multi-node architecture, BEMOSS provides a distributed architecture where load controllers in a multi-floor and high occupancy building could be monitored and controlled by multiple single-board computers hosting BEMOSS. This makes it possible for a building engineer to deploy BEMOSS in one zone of a building, be comfortable with its operation, and later on expand the deployment to the entire building to make it more energy efficient. (6) Ability to provide local and remote monitoring – BEMOSS provides both local and remote monitoring

  17. Open-source tools for data mining.

    Science.gov (United States)

    Zupan, Blaz; Demsar, Janez

    2008-03-01

    With a growing volume of biomedical databases and repositories, the need to develop a set of tools to address their analysis and support knowledge discovery is becoming acute. The data mining community has developed a substantial set of techniques for computational treatment of these data. In this article, we discuss the evolution of open-source toolboxes that data mining researchers and enthusiasts have developed over the span of a few decades and review several currently available open-source data mining suites. The approaches we review are diverse in data mining methods and user interfaces and also demonstrate that the field and its tools are ready to be fully exploited in biomedical research.

  18. An Open-Source Based ITS Platform

    DEFF Research Database (Denmark)

    Andersen, Ove; Krogh, Benjamin Bjerre; Torp, Kristian

    2013-01-01

    In this paper, a complete platform used to compute travel times from GPS data is described. Two approaches to computing travel time are proposed one based on points and one based on trips. Overall both approaches give reasonable results compared to existing manual estimated travel times. However......, the trip-based approach requires more GPS data and of a higher quality than the point-based approach. The platform has been completely implemented using open-source software. The main conclusion is that large quantity of GPS data can be managed, with a limited budget and that GPS data is a good source...... for estimating travel times, if enough data is available....

  19. New Open-Source Version of FLORIS Released | News | NREL

    Science.gov (United States)

    New Open-Source Version of FLORIS Released New Open-Source Version of FLORIS Released January 26 , 2018 National Renewable Energy Laboratory (NREL) researchers recently released an updated open-source simplified and documented. Because of the living, open-source nature of the newly updated utility, NREL

  20. A self-similar model for conduction in the plasma erosion opening switch

    International Nuclear Information System (INIS)

    Mosher, D.; Grossmann, J.M.; Ottinger, P.F.; Colombant, D.G.

    1987-01-01

    The conduction phase of the plasma erosion opening switch (PEOS) is characterized by combining a 1-D fluid model for plasma hydrodynamics, Maxwell's equations, and a 2-D electron-orbit analysis. A self-similar approximation for the plasma and field variables permits analytic expressions for their space and time variations to be derived. It is shown that a combination of axial MHD compression and magnetic insulation of high-energy electrons emitted from the switch cathode can control the character of switch conduction. The analysis highlights the need to include additional phenomena for accurate fluid modeling of PEOS conduction

  1. OPEN SOURCE APPROACH TO URBAN GROWTH SIMULATION

    Directory of Open Access Journals (Sweden)

    A. Petrasova

    2016-06-01

    Full Text Available Spatial patterns of land use change due to urbanization and its impact on the landscape are the subject of ongoing research. Urban growth scenario simulation is a powerful tool for exploring these impacts and empowering planners to make informed decisions. We present FUTURES (FUTure Urban – Regional Environment Simulation – a patch-based, stochastic, multi-level land change modeling framework as a case showing how what was once a closed and inaccessible model benefited from integration with open source GIS.We will describe our motivation for releasing this project as open source and the advantages of integrating it with GRASS GIS, a free, libre and open source GIS and research platform for the geospatial domain. GRASS GIS provides efficient libraries for FUTURES model development as well as standard GIS tools and graphical user interface for model users. Releasing FUTURES as a GRASS GIS add-on simplifies the distribution of FUTURES across all main operating systems and ensures the maintainability of our project in the future. We will describe FUTURES integration into GRASS GIS and demonstrate its usage on a case study in Asheville, North Carolina. The developed dataset and tutorial for this case study enable researchers to experiment with the model, explore its potential or even modify the model for their applications.

  2. A Survey of Industrial Involvement in Open Source

    OpenAIRE

    Røsdal, Andreas

    2006-01-01

    This thesis presents the results of an explorative survey of industrial involvement in open source. The survey is performed in collaboration with participants from the European ITEA project, COSI (Co-development using inner & Open source in Software Intensive products). The survey was performed to explore aspects of industrial involvement in open source, as industrial management of open source project, industrial use of open source components, related development, and communication processes,...

  3. Code Forking, Governance, and Sustainability in Open Source Software

    OpenAIRE

    Juho Lindman; Linus Nyman

    2013-01-01

    The right to fork open source code is at the core of open source licensing. All open source licenses grant the right to fork their code, that is to start a new development effort using an existing code as its base. Thus, code forking represents the single greatest tool available for guaranteeing sustainability in open source software. In addition to bolstering program sustainability, code forking directly affects the governance of open source initiatives. Forking, and even the mere possibilit...

  4. Long conduction time plasma opening switch experiments at Sandia National Laboratories

    International Nuclear Information System (INIS)

    Savage, M.E.; Simpson, W.W.; Cooper, G.W.; Usher, M.A.

    1993-01-01

    Sandia National Laboratories has undertaken an ambitious program to reduce the size and cost of large pulsed power drivers. The program basis is inductive energy storage and Plasma Opening Switches (POS). Inductive energy storage has well known advantages, including increased efficiency and reduced stress on the vacuum interface. The Sandia approach is to retain the reliable and efficient Marx generator and the temporal pulse compression of the water dielectric capacitor. A triggered closing switch, developed at Sandia, transfers the capacitor charge into the energy storage inductor. This approach has several advantages, including relaxed requirements on Marx jitter and inductance, and much faster current risetime in the energy storage inductor. The POS itself is the key to the Sandia program. The switch design uses an auxiliary magnetic field to inject the plasma and hold it in place during conduction. After opening begins, the self magnetic field of the power pulse pushes on the plasma to increase the opened gap. The authors use magnetic pressure because they desire POS gaps of several cm. Typical plasma opening switches do not achieve large gaps. Improved opening allows more efficient transfer to loads. They present results from recent experiments at Sandia. Their driver presently supplies 650 kA with a 240 ns risetime to the input of the POS. The storage inductor is a 17 Ohm magnetically insulated transmission line (MITL) that is five meters long. They discuss the ways in which magnetic field influences the POS, and the ways in which they control the magnetic fields

  5. Beyond Open Source: According to Jim Hirsch, Open Technology, Not Open Source, Is the Wave of the Future

    Science.gov (United States)

    Villano, Matt

    2006-01-01

    This article presents an interview with Jim Hirsch, an associate superintendent for technology at Piano Independent School District in Piano, Texas. Hirsch serves as a liaison for the open technologies committee of the Consortium for School Networking. In this interview, he shares his opinion on the significance of open source in K-12.

  6. Software development an open source approach

    CERN Document Server

    Tucker, Allen; de Silva, Chamindra

    2011-01-01

    Overview and Motivation Software Free and Open Source Software (FOSS)Two Case Studies Working with a Project Team Key FOSS Activities Client-Oriented vs. Community-Oriented Projects Working on a Client-Oriented Project Joining a Community-Oriented Project Using Project Tools Collaboration Tools Code Management Tools Run-Time System ConstraintsSoftware Architecture Architectural Patterns Layers, Cohesion, and Coupling Security Concurrency, Race Conditions, and DeadlocksWorking with Code Bad Smells and Metrics Refactoring Testing Debugging Extending the Software for a New ProjectDeveloping the D

  7. An open-source thermodynamic software library

    DEFF Research Database (Denmark)

    Ritschel, Tobias Kasper Skovborg; Gaspar, Jozsef; Capolei, Andrea

    This is a technical report which accompanies the article ”An open-source thermodynamic software library” which describes an efficient Matlab and C implementation for evaluation of thermodynamic properties. In this technical report we present the model equations, that are also presented in the paper......, together with a full set of first and second order derivatives with respect to temperature and pressure, and in cases where applicable, also with respect to mole numbers. The library is based on parameters and correlations from the DIPPR database and the Peng-Robinson and the Soave-Redlich-Kwong equations...

  8. Open Source-Marketing im Unternehmenseinsatz

    OpenAIRE

    Sarstedt, Marko; Hieke, Marie-Sophie

    2007-01-01

    Die steigende Anzahl an Reaktanzen der Konsumenten gegenüber jeglicher Form von Werbung, insbesondere aber der klassischen, zwingt Unternehmen heute mehr denn je dazu, neue Möglichkeiten zu suchen, um die Wünsche der Kunden erforschen und besser erfüllen zu können. Gerade den latenten, dem Verbraucher also noch nicht bewussten, Bedürfnissen gilt es Rechnung zu tragen. Der aus der Software Branche aufgegriffene Open-Source-Gedanke kann hier ansetzen, um den Konsumenten nicht nur stärker in den...

  9. Open source platform Digital Personal Assistant

    OpenAIRE

    Usachev, Denis; Khusnutdinov, Azat; Mazzara, Manuel; Khan, Adil; Panchenko, Ivan

    2018-01-01

    Nowadays Digital Personal Assistants (DPA) become more and more popular. DPAs help to increase quality of life especially for elderly or disabled people. In this paper we develop an open source DPA and smart home system as a 3-rd party extension to show the functionality of the assistant. The system is designed to use the DPA as a learning platform for engineers to provide them with the opportunity to create and test their own hypothesis. The DPA is able to recognize users' commands in natura...

  10. Methodology, Measurement and Analysis of Flow Table Update Characteristics in Hardware OpenFlow Switches

    KAUST Repository

    Kuźniar, Maciej

    2018-02-15

    Software-Defined Networking (SDN) and OpenFlow are actively being standardized and deployed. These deployments rely on switches that come from various vendors and differ in terms of performance and available features. Understanding these differences and performance characteristics is essential for ensuring successful and safe deployments.We propose a systematic methodology for SDN switch performance analysis and devise a series of experiments based on this methodology. The methodology relies on sending a stream of rule updates, while relying on both observing the control plane view as reported by the switch and probing the data plane state to determine switch characteristics by comparing these views. We measure, report and explain the performance characteristics of flow table updates in six hardware OpenFlow switches. Our results describing rule update rates can help SDN designers make their controllers efficient. Further, we also highlight differences between the OpenFlow specification and its implementations, that if ignored, pose a serious threat to network security and correctness.

  11. Repositorios digitales y software open source

    Directory of Open Access Journals (Sweden)

    Doria, María Vanesa

    2015-06-01

    Full Text Available En la actualidad las universidades se encuentran en constante evolución, fruto de la transformación generada por la sociedad de la información y el conocimiento, donde la transversalidad son las Tecnologías de la Información y Comunicación (TIC, que tienen como objetivo ampliar el acceso a la información y el conocimiento a través de su herramienta digital más distinguida, Internet. Las universidades retroalimentan su conocimiento e información, mediante las producciones científicasacadémicas, y para promover el acceso a ellas, muchas universidades están inclinándose al movimiento del Acceso Abierto (AA siguiendo la vía verde en el desarrollo de repositorios digitales (RD. Para la creación de RD es necesario analizar los software open source disponibles, dado que estos son las herramientas que facilitan la automatización de los mismos. El presente estudio se centra en el análisis de los software open source existentes en el mercado.

  12. Open Source Hardware for DIY Environmental Sensing

    Science.gov (United States)

    Aufdenkampe, A. K.; Hicks, S. D.; Damiano, S. G.; Montgomery, D. S.

    2014-12-01

    The Arduino open source electronics platform has been very popular within the DIY (Do It Yourself) community for several years, and it is now providing environmental science researchers with an inexpensive alternative to commercial data logging and transmission hardware. Here we present the designs for our latest series of custom Arduino-based dataloggers, which include wireless communication options like self-meshing radio networks and cellular phone modules. The main Arduino board uses a custom interface board to connect to various research-grade sensors to take readings of turbidity, dissolved oxygen, water depth and conductivity, soil moisture, solar radiation, and other parameters. Sensors with SDI-12 communications can be directly interfaced to the logger using our open Arduino-SDI-12 software library (https://github.com/StroudCenter/Arduino-SDI-12). Different deployment options are shown, like rugged enclosures to house the loggers and rigs for mounting the sensors in both fresh water and marine environments. After the data has been collected and transmitted by the logger, the data is received by a mySQL-PHP stack running on a web server that can be accessed from anywhere in the world. Once there, the data can be visualized on web pages or served though REST requests and Water One Flow (WOF) services. Since one of the main benefits of using open source hardware is the easy collaboration between users, we are introducing a new web platform for discussion and sharing of ideas and plans for hardware and software designs used with DIY environmental sensors and data loggers.

  13. An Open Source Tool to Test Interoperability

    Science.gov (United States)

    Bermudez, L. E.

    2012-12-01

    Scientists interact with information at various levels from gathering of the raw observed data to accessing portrayed processed quality control data. Geoinformatics tools help scientist on the acquisition, storage, processing, dissemination and presentation of geospatial information. Most of the interactions occur in a distributed environment between software components that take the role of either client or server. The communication between components includes protocols, encodings of messages and managing of errors. Testing of these communication components is important to guarantee proper implementation of standards. The communication between clients and servers can be adhoc or follow standards. By following standards interoperability between components increase while reducing the time of developing new software. The Open Geospatial Consortium (OGC), not only coordinates the development of standards but also, within the Compliance Testing Program (CITE), provides a testing infrastructure to test clients and servers. The OGC Web-based Test Engine Facility, based on TEAM Engine, allows developers to test Web services and clients for correct implementation of OGC standards. TEAM Engine is a JAVA open source facility, available at Sourceforge that can be run via command line, deployed in a web servlet container or integrated in developer's environment via MAVEN. The TEAM Engine uses the Compliance Test Language (CTL) and TestNG to test HTTP requests, SOAP services and XML instances against Schemas and Schematron based assertions of any type of web service, not only OGC services. For example, the OGC Web Feature Service (WFS) 1.0.0 test has more than 400 test assertions. Some of these assertions includes conformance of HTTP responses, conformance of GML-encoded data; proper values for elements and attributes in the XML; and, correct error responses. This presentation will provide an overview of TEAM Engine, introduction of how to test via the OGC Testing web site and

  14. Muticriteria decision making model for chosing between open source and non-open source software

    Directory of Open Access Journals (Sweden)

    Edmilson Alves de Moraes

    2008-09-01

    Full Text Available This article proposes the use of a multicriterio method for supporting decision on a problem where the intent is to chose for software given the options of open source and not-open source. The study shows how a method for decison making can be used to provide problem structuration and simplify the decision maker job. The method Analytic Hierarchy Process-AHP is described step-by-step and its benefits and flaws are discussed. Followin the theoretical discussion, a muliple case study is presented, where two companies are to use the decison making method. The analysis was supported by Expert Choice, a software developed based on AHP framework.

  15. Open Source Service Agent (OSSA) in the intelligence community's Open Source Architecture

    Science.gov (United States)

    Fiene, Bruce F.

    1994-01-01

    The Community Open Source Program Office (COSPO) has developed an architecture for the intelligence community's new Open Source Information System (OSIS). The architecture is a multi-phased program featuring connectivity, interoperability, and functionality. OSIS is based on a distributed architecture concept. The system is designed to function as a virtual entity. OSIS will be a restricted (non-public), user configured network employing Internet communications. Privacy and authentication will be provided through firewall protection. Connection to OSIS can be made through any server on the Internet or through dial-up modems provided the appropriate firewall authentication system is installed on the client.

  16. Why Open Source Hardware matters and why you should care

    OpenAIRE

    Gürkaynak, Frank K.

    2017-01-01

    Open source hardware is currently where open source software was about 30 years ago. The idea is well received by enthusiasts, there is interest and the open source hardware has gained visible momentum recently, with several well-known universities including UC Berkeley, Cambridge and ETH Zürich actively working on large projects involving open source hardware, attracting the attention of companies big and small. But it is still not quite there yet. In this talk, based on my experience on the...

  17. The Economics of Technology Sharing: Open Source and Beyond

    OpenAIRE

    Josh Lerner; Jean Tirole

    2004-01-01

    This paper reviews our understanding of the growing open source movement. We highlight how many aspects of open source software appear initially puzzling to an economist. As we have acknowledged, our ability to answer confidently many of the issues raised here questions is likely to increase as the open source movement itself grows and evolves. At the same time, it is heartening to us how much of open source activities can be understood within existing economic frameworks, despite the presenc...

  18. Managerial Perspective on Open Source Collaboration and Networked Innovation

    OpenAIRE

    Henttonen Maaret Katja; Pasi Pussinen; Timo Koivumäki

    2012-01-01

    This study explores the managerial perspectives towards open source software and networked innovation. We analysed six software companies who use open source software as a significant part of their product or service offering. The study found notable differences in managerial attitudes, expected benefits and key challenges related to open source software and its role in innovative activities. While all companies were using same pieces of software with open source communities, there were diffe...

  19. Selection and Management of Open Source Software in Libraries

    OpenAIRE

    Vimal Kumar, V.

    2007-01-01

    Open source software was a revolutionary concept among computer programmers and users. To a certain extent open source solutions could provide an alternative solution to costly commercial software. Open source software is, software that users have the ability to run, copy, distribute, study, change, share and improve for any purpose. Open source library software’s does not need the initial cost of commercial software and enables libraries to have greater control over their working environmen...

  20. High voltage, high power operation of the plasma erosion opening switch

    International Nuclear Information System (INIS)

    Neri, J.M.; Boller, J.R.; Ottinger, P.F.; Weber, B.V.; Young, F.C.

    1987-01-01

    A Plasma Erosion Opening Switch (PEOS) is used as the opening switch for a vacuum inductive storage system driven by a 1.8-MV, 1.6-TW pulsed power generator. A 135-nH vacuum inductor is current charged to ∼750 kA in 50 ns through the closed PEOS which then opens in <10 ns into an inverse ion diode load. Electrical diagnostics and nuclear activations from ions accelerated in the diode yield a peak load voltage (4.25 MV) and peak load power (2.8 TW) that are 2.4 and 1.8 times greater than ideal matched load values for the same generator pulse

  1. An Open-Source ITS Platform

    DEFF Research Database (Denmark)

    Andersen, Ove; Torp, Kristian

    2012-01-01

    In this report a complete system used to compute travel-times from GPS data is described. Two approaches to computing travel time are proposed one based on points and one based on trips. Overall both approaches gives reasonable results compared to existing manual estimated travel times. However......, the trip-based approach requires more GPS data and of a higher quality than the point-based approach. The system has been completely implemented using open-source software and is in production. A detailed performance study, using a desktop PC, shows that the system can handle large data sizes...... and that the performance scales, for some components, linearly with the number of processor cores available. The main conclusion is that large quantity of GPS data can, with a very limited budget, used for estimating travel times, if enough GPS data is available....

  2. HERAFitter, Open Source QCD Fit Project

    CERN Document Server

    Alekhin, S.; Belov, P.; Borroni, S.; Botje, M.; Britzger, D.; Camarda, S.; Cooper-Sarkar, A.M.; Daum, K.; Diaconu, C.; Feltesse, J.; Gizhko, A.; Glazov, A.; Guffanti, A.; Guzzi, M.; Hautmann, F.; Jung, A.; Jung, H.; Kolesnikov, V.; Kowalski, H.; Kuprash, O.; Kusina, A.; Levonian, S.; Lipka, K.; Lobodzinski, B.; Lohwasser, K.; Luszczak, A.; Malaescu, B.; McNulty, R.; Myronenko, V.; Naumann-Emme, S.; Nowak, K.; Olness, F.; Perez, E.; Pirumov, H.; Plačakytė, R.; Rabbertz, K.; Radescu, V.; Sadykov, R.; Salam, G.P.; Sapronov, A.; Schöning, A.; Schörner-Sadenius, T.; Shushkevich, S.; Slominski, W.; Spiesberger, H.; Starovoitov, P.; Sutton, M.; Tomaszewska, J.; Turkot, O.; Vargas, A.; Watt, G.; Wichmann, K.

    2015-07-02

    HERAFitter is an open-source package that provides a framework for the determination of the parton distribution functions (PDFs) of the proton and for many different kinds of analyses in Quantum Chromodynamics (QCD). It encodes results from a wide range of experimental measurements in lepton-proton deep inelastic scattering and proton-proton (proton-antiproton) collisions at hadron colliders. These are complemented with a variety of theoretical options for calculating PDF-dependent cross section predictions corresponding to the measurements. The framework covers a large number of the existing methods and schemes used for PDF determination. The data and theoretical predictions are brought together through numerous methodological options for carrying out PDF fits and plotting tools to help visualise the results. While primarily based on the approach of collinear factorisation, HERAFitter also provides facilities for fits of dipole models and transverse-momentum dependent PDFs. The package can be used to study t...

  3. Building Energy Management Open Source Software

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Saifur [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2017-08-25

    Funded by the U.S. Department of Energy in November 2013, a Building Energy Management Open Source Software (BEMOSS) platform was engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. According to the Energy Information Administration (EIA), small- (5,000 square feet or smaller) and medium-sized (between 5,001 to 50,000 square feet) commercial buildings constitute about 95% of all commercial buildings in the U.S. These buildings typically do not have Building Automation Systems (BAS) to monitor and control building operation. While commercial BAS solutions exist, including those from Siemens, Honeywell, Johnsons Controls and many more, they are not cost effective in the context of small- and medium-sized commercial buildings, and typically work with specific controller products from the same company. BEMOSS targets small and medium-sized commercial buildings to address this gap.

  4. Open Source Software The Challenge Ahead

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    The open source community has done amazingly well in terms of challenging the historical epicenter of computing - the supercomputer and data center - and driving change there. Linux now represents a healthy and growing share of infrastructure in large organisations globally. Apache and other infrastructural components have established the new de facto standard for software in the back office: freedom. It would be easy to declare victory. But the real challenge lies ahead - taking free software to the mass market, to your grandparents, to your nieces and nephews, to your friends. This is the next wave, and if we are to be successful we need to articulate the audacious goals clearly and loudly - because that's how the community process works best. Speaker Bio: Mark Shuttleworth founded the Ubuntu Project in early 2004. Ubuntu is an enterprise Linux distribution that is freely available worldwide and has both desktop and enterprise server editions. Mark studied finance and information technology at the Universit...

  5. Evolution of an Open Source Strategy

    Directory of Open Access Journals (Sweden)

    Ronald Baecker

    2007-10-01

    Full Text Available On June 8th, 2005, we officially launched the ePresence (http://epresence.tv/ Interactive Media Open Source Consortium, at the Knowledge Media Design Institute (KMDI, University of Toronto (UofT. We had been researching and developing ePresence, our webcasting, webconferencing, and archiving software project for about five years. Throughout the early phase of the project we used the system to produce live webcasts of KMDI's annual lecture series. Eventually word spread about our webcasting system and other universities, such as Memorial University in Newfoundland, became interested. It was obvious that the time to share our project with the world had come, but what wasn't obvious to us at the time was how we were going to do that.

  6. An open source business model for malaria.

    Science.gov (United States)

    Årdal, Christine; Røttingen, John-Arne

    2015-01-01

    Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, 'closed' publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more "open source" approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV) to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.' President's Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related to new malaria

  7. An open source business model for malaria.

    Directory of Open Access Journals (Sweden)

    Christine Årdal

    Full Text Available Greater investment is required in developing new drugs and vaccines against malaria in order to eradicate malaria. These precious funds must be carefully managed to achieve the greatest impact. We evaluate existing efforts to discover and develop new drugs and vaccines for malaria to determine how best malaria R&D can benefit from an enhanced open source approach and how such a business model may operate. We assess research articles, patents, clinical trials and conducted a smaller survey among malaria researchers. Our results demonstrate that the public and philanthropic sectors are financing and performing the majority of malaria drug/vaccine discovery and development, but are then restricting access through patents, 'closed' publications and hidden away physical specimens. This makes little sense since it is also the public and philanthropic sector that purchases the drugs and vaccines. We recommend that a more "open source" approach is taken by making the entire value chain more efficient through greater transparency which may lead to more extensive collaborations. This can, for example, be achieved by empowering an existing organization like the Medicines for Malaria Venture (MMV to act as a clearing house for malaria-related data. The malaria researchers that we surveyed indicated that they would utilize such registry data to increase collaboration. Finally, we question the utility of publicly or philanthropically funded patents for malaria medicines, where little to no profits are available. Malaria R&D benefits from a publicly and philanthropically funded architecture, which starts with academic research institutions, product development partnerships, commercialization assistance through UNITAID and finally procurement through mechanisms like The Global Fund to Fight AIDS, Tuberculosis and Malaria and the U.S.' President's Malaria Initiative. We believe that a fresh look should be taken at the cost/benefit of patents particularly related

  8. Particle-in-cell simulations of plasma opening switch with external magnetic field

    International Nuclear Information System (INIS)

    Chen Yulan; Zeng Zhengzhong; Sun Fengju

    2003-01-01

    Fully electromagnetic particle-in-cell simulations are performed to study the effects of an external magnetic field on coaxial plasma opening switch (POS). The simulation results show that POS opening performance can be significantly improved only when external longitudinal magnetic field coils are placed at the cathode side, and an additional azimuthal magnetic field is effective whether the central electrode is of positive or negative polarity. Voltage multiplication coefficient K rises with the additional magnetic field increasing till the electron current is completely magnetically insulated during the opening of POS

  9. Behind Linus's Law: Investigating Peer Review Processes in Open Source

    Science.gov (United States)

    Wang, Jing

    2013-01-01

    Open source software has revolutionized the way people develop software, organize collaborative work, and innovate. The numerous open source software systems that have been created and adopted over the past decade are influential and vital in all aspects of work and daily life. The understanding of open source software development can enhance its…

  10. An Analysis of Open Source Security Software Products Downloads

    Science.gov (United States)

    Barta, Brian J.

    2014-01-01

    Despite the continued demand for open source security software, a gap in the identification of success factors related to the success of open source security software persists. There are no studies that accurately assess the extent of this persistent gap, particularly with respect to the strength of the relationships of open source software…

  11. Building Eclectic Personal Learning Landscapes with Open Source Tools

    NARCIS (Netherlands)

    Kalz, Marco

    2008-01-01

    Kalz, M. (2005). Building Eclectic Personal Learning Landscapes with Open Source Tools. In F. de Vries, G. Attwell, R. Elferink & A. Tödt (Eds.), Open Source for Education in Europe. Research & Practice (= Proceedings of the Open Source for Education in Europe Conference) (pp. 163-168). 2005,

  12. Adoption of open source digital library software packages: a survey

    OpenAIRE

    Jose, Sanjo

    2007-01-01

    Open source digital library packages are gaining popularity nowadays. To build a digital library under economical conditions open source software is preferable. This paper tries to identify the extent of adoption of open source digital library software packages in various organizations through an online survey. It lays down the findings from the survey.

  13. Building Eclectic Personal Learning Landscapes with Open Source Tools

    OpenAIRE

    Kalz, Marco

    2008-01-01

    Kalz, M. (2005). Building Eclectic Personal Learning Landscapes with Open Source Tools. In F. de Vries, G. Attwell, R. Elferink & A. Tödt (Eds.), Open Source for Education in Europe. Research & Practice (= Proceedings of the Open Source for Education in Europe Conference) (pp. 163-168). 2005, Heerlen, The Netherlands.

  14. Open-Switch Fault Diagnosis and Fault Tolerant for Matrix Converter with Finite Control Set-Model Predictive Control

    DEFF Research Database (Denmark)

    Peng, Tao; Dan, Hanbing; Yang, Jian

    2016-01-01

    To improve the reliability of the matrix converter (MC), a fault diagnosis method to identify single open-switch fault is proposed in this paper. The introduced fault diagnosis method is based on finite control set-model predictive control (FCS-MPC), which employs a time-discrete model of the MC...... topology and a cost function to select the best switching state for the next sampling period. The proposed fault diagnosis method is realized by monitoring the load currents and judging the switching state to locate the faulty switch. Compared to the conventional modulation strategies such as carrier......-based modulation method, indirect space vector modulation and optimum Alesina-Venturini, the FCS-MPC has known and unchanged switching state in a sampling period. It is simpler to diagnose the exact location of the open switch in MC with FCS-MPC. To achieve better quality of the output current under single open...

  15. The Growth of open source: A look at how companies are utilizing open source software in their business models

    OpenAIRE

    Feare, David

    2009-01-01

    This paper examines how open source software is being incorporated into the business models of companies in the software industry. The goal is to answer the question of whether the open source model can help sustain economic growth. While some companies are able to maintain a "pure" open source approach with their business model, the reality is that most companies are relying on proprietary add-on value in order to generate revenue because open source itself is simply not big business. Ultima...

  16. Inexpensive Open-Source Data Logging in the Field

    Science.gov (United States)

    Wickert, A. D.

    2013-12-01

    I present a general-purpose open-source field-capable data logger, which provides a mechanism to develop dense networks of inexpensive environmental sensors. This data logger was developed as a low-power variant of the Arduino open-source development system, and is named the ALog ("Arduino Logger") BottleLogger (it is slim enough to fit inside a Nalgene water bottle) version 1.0. It features an integrated high-precision real-time clock, SD card slot for high-volume data storage, and integrated power switching. The ALog can interface with sensors via six analog/digital pins, two digital pins, and one digital interrupt pin that can read event-based inputs, such as those from a tipping-bucket rain gauge. We have successfully tested the ALog BottleLogger with ultrasonic rangefinders (for water stage and snow accumulation and melt), temperature sensors, tipping-bucket rain gauges, soil moisture and water potential sensors, resistance-based tools to measure frost heave, and cameras that it triggers based on events. The source code for the ALog, including functions to interface with a a range of commercially-available sensors, is provided as an Arduino C++ library with example implementations. All schematics, circuit board layouts, and source code files are open-source and freely available under GNU GPL v3.0 and Creative Commons Attribution-ShareAlike 3.0 Unported licenses. Through this work, we hope to foster a community-driven movement to collect field environmental data on a budget that permits citizen-scientists and researchers from low-income countries to collect the same high-quality data as researchers in wealthy countries. These data can provide information about global change to managers, governments, scientists, and interested citizens worldwide. Watertight box with ALog BottleLogger data logger on the left and battery pack with 3 D cells on the right. Data can be collected for 3-5 years on one set of batteries.

  17. Developing an Open Source Option for NASA Software

    Science.gov (United States)

    Moran, Patrick J.; Parks, John W. (Technical Monitor)

    2003-01-01

    We present arguments in favor of developing an Open Source option for NASA software; in particular we discuss how Open Source is compatible with NASA's mission. We compare and contrast several of the leading Open Source licenses, and propose one - the Mozilla license - for use by NASA. We also address some of the related issues for NASA with respect to Open Source. In particular, we discuss some of the elements in the External Release of NASA Software document (NPG 2210.1A) that will likely have to be changed in order to make Open Source a reality withm the agency.

  18. How Open Source Has Changed the Software Industry: Perspectives from Open Source Entrepreneurs

    OpenAIRE

    Lindman, Juho; Rajala, Risto

    2012-01-01

    The emergence of F/LOSS (free/libre open source software) has triggered several changes in the software industry. F/LOSS has been cited as an archetypal form of open innovation; it consists of the convergence and collaboration of like-minded parties. An increasing number of software firms have taken upon this approach to link outsiders into their service development and product design. Also, software firms have been increasingly grounded their business models on user-centric and service-orien...

  19. Observation of plasma motion in a coaxial plasma opening switch with a chordal laser interferometer

    International Nuclear Information System (INIS)

    Teramoto, Y.; Urakami, H.; Akiyama, H.; Kohno, S.; Katsuki, S.

    2002-01-01

    Electron densities in a coaxial plasma opening switch were measured at many lines-of-slight. In the present experiment, electron density was measured by a He-Ne laser interferometer with chordal lines-of sight. In order to observe the motion of the POS plasma, the electron density contours during the conduction, opening and post-opening phases were drawn by combining the results of interferometer experiments. The radial and axial motion of POS plasma was investigated from the density contours. As conduction time progressed, the POS plasma moved toward downstream. At 800 ns, which corresponds to the time of opening in the current waveform, low-density region less than 10 15 cm -2 is seen at 10 mm from the cathode. After the opening was completed, the low-density gap disappeared and the shape of the corn-shape-like plasma was distorted. (author)

  20. Observation of plasma motion in a coaxial plasma opening switch with a chordal laser interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Teramoto, Y.; Urakami, H.; Akiyama, H. [Kumamoto Univ., Graduate School of Science and Technology, Kumamoto (Japan); Kohno, S. [Ariake National College of Technology, Dept. of Electrical Engineering, Fukuoka (Japan); Katsuki, S. [Kumamoto Univ., Dept. of Electrical and Computer Engineering, Kumamoto (Japan)

    2002-06-01

    Electron densities in a coaxial plasma opening switch were measured at many lines-of-slight. In the present experiment, electron density was measured by a He-Ne laser interferometer with chordal lines-of sight. In order to observe the motion of the POS plasma, the electron density contours during the conduction, opening and post-opening phases were drawn by combining the results of interferometer experiments. The radial and axial motion of POS plasma was investigated from the density contours. As conduction time progressed, the POS plasma moved toward downstream. At 800 ns, which corresponds to the time of opening in the current waveform, low-density region less than 10{sup 15} cm{sup -2} is seen at 10 mm from the cathode. After the opening was completed, the low-density gap disappeared and the shape of the corn-shape-like plasma was distorted. (author)

  1. Open-Switch Fault Detection Method of a Back-to-Back Converter Using NPC Topology for Wind Turbine Systems

    DEFF Research Database (Denmark)

    Lee, June-Seok; Lee, Kyo_Beum; Blaabjerg, Frede

    2015-01-01

    system can break down in the worst case scenario. To improve the reliability of WTG systems, an open-switch fault detection method for back-to-back converters using the NPC topology is required. This study analyzes effects of inner and outer open-switch faults of the NPC rectifier and inverter......In wind turbine generation (WTG) systems, a back-to-back converter with a neutral-point-clamped (NPC) topology is widely used because this topology has more advantages than a conventional two-level topology, particularly when operating at high power. There are 12 switches in the NPC topology....... An open-switch fault in the NPC rectifier of the back-to-back converter leads to the distortion of the input current and torque vibration in the system. Additionally, an open-switch fault in the NPC inverter of the back-to-back converter causes the distortion of the output current. Furthermore, the WTG...

  2. Open Source Software Projects Needing Security Investments

    Science.gov (United States)

    2015-06-19

    modtls, BouncyCastle, gpg, otr, axolotl. 7. Static analyzers: Clang, Frama-C. 8. Nginx. 9. OpenVPN . It was noted that the funding model may be similar...to OpenSSL, where consulting funds the company. It was also noted that OpenVPN needs to correctly use OpenSSL in order to be secure, so focusing on...Dovecot 4. Other high-impact network services: OpenSSH, OpenVPN , BIND, ISC DHCP, University of Delaware NTPD 5. Core infrastructure data parsers

  3. The successes and challenges of open-source biopharmaceutical innovation.

    Science.gov (United States)

    Allarakhia, Minna

    2014-05-01

    Increasingly, open-source-based alliances seek to provide broad access to data, research-based tools, preclinical samples and downstream compounds. The challenge is how to create value from open-source biopharmaceutical innovation. This value creation may occur via transparency and usage of data across the biopharmaceutical value chain as stakeholders move dynamically between open source and open innovation. In this article, several examples are used to trace the evolution of biopharmaceutical open-source initiatives. The article specifically discusses the technological challenges associated with the integration and standardization of big data; the human capacity development challenges associated with skill development around big data usage; and the data-material access challenge associated with data and material access and usage rights, particularly as the boundary between open source and open innovation becomes more fluid. It is the author's opinion that the assessment of when and how value creation will occur, through open-source biopharmaceutical innovation, is paramount. The key is to determine the metrics of value creation and the necessary technological, educational and legal frameworks to support the downstream outcomes of now big data-based open-source initiatives. The continued focus on the early-stage value creation is not advisable. Instead, it would be more advisable to adopt an approach where stakeholders transform open-source initiatives into open-source discovery, crowdsourcing and open product development partnerships on the same platform.

  4. OpenMx: An Open Source Extended Structural Equation Modeling Framework

    Science.gov (United States)

    Boker, Steven; Neale, Michael; Maes, Hermine; Wilde, Michael; Spiegel, Michael; Brick, Timothy; Spies, Jeffrey; Estabrook, Ryne; Kenny, Sarah; Bates, Timothy; Mehta, Paras; Fox, John

    2011-01-01

    OpenMx is free, full-featured, open source, structural equation modeling (SEM) software. OpenMx runs within the "R" statistical programming environment on Windows, Mac OS-X, and Linux computers. The rationale for developing OpenMx is discussed along with the philosophy behind the user interface. The OpenMx data structures are…

  5. HERAFitter. Open source QCD fit project

    International Nuclear Information System (INIS)

    Alekhin, S.; Behnke, O.; Belov, P.

    2014-11-01

    HERAFitter is an open-source package that provides a framework for the determination of the parton distribution functions (PDFs) of the proton and for many different kinds of analyses in Quantum Chromodynamics (QCD). It encodes results from a wide range of experimental measurements in lepton-proton deep inelastic scattering and proton-proton (proton-antiproton) collisions at hadron colliders. These are complemented with a variety of theoretical options for calculating PDF-dependent cross section predictions corresponding to the measurements. The framework covers a large number of the existing methods and schemes used for PDF determination. The data and theoretical predictions are brought together through numerous methodological options for carrying out PDF fits and plotting tools to help visualise the results. While primarily based on the approach of collinear factorisation, HERAFitter also provides facilities for fits of dipole models and transverse-momentum dependent PDFs. The package can be used to study the impact of new precise measurements from hadron colliders. This paper describes the general structure of HERAFitter and its wide choice of options.

  6. Open source integrated modeling environment Delta Shell

    Science.gov (United States)

    Donchyts, G.; Baart, F.; Jagers, B.; van Putten, H.

    2012-04-01

    In the last decade, integrated modelling has become a very popular topic in environmental modelling since it helps solving problems, which is difficult to model using a single model. However, managing complexity of integrated models and minimizing time required for their setup remains a challenging task. The integrated modelling environment Delta Shell simplifies this task. The software components of Delta Shell are easy to reuse separately from each other as well as a part of integrated environment that can run in a command-line or a graphical user interface mode. The most components of the Delta Shell are developed using C# programming language and include libraries used to define, save and visualize various scientific data structures as well as coupled model configurations. Here we present two examples showing how Delta Shell simplifies process of setting up integrated models from the end user and developer perspectives. The first example shows coupling of a rainfall-runoff, a river flow and a run-time control models. The second example shows how coastal morphological database integrates with the coastal morphological model (XBeach) and a custom nourishment designer. Delta Shell is also available as open-source software released under LGPL license and accessible via http://oss.deltares.nl.

  7. Closed-loop, open-source electrophysiology

    Directory of Open Access Journals (Sweden)

    John D Rolston

    2010-09-01

    Full Text Available Multiple extracellular microelectrodes (multi-electrode arrays, or MEAs effectively record rapidly varying neural signals, and can also be used for electrical stimulation. Multi-electrode recording can serve as artificial output (efferents from a neural system, while complex spatially and temporally targeted stimulation can serve as artificial input (afferents to the neuronal network. Multi-unit or local field potential recordings can not only be used to control real world artifacts, such as prostheses, computers or robots, but can also trigger or alter subsequent stimulation. Real-time feedback stimulation may serve to modulate or normalize aberrant neural activity, to induce plasticity, or to serve as artificial sensory input. Despite promising closed-loop applications, commercial electrophysiology systems do not yet take advantage of the bidirectional capabilities of multi-electrodes, especially for use in freely moving animals. We addressed this lack of tools for closing the loop with NeuroRighter, an open-source system including recording hardware, stimulation hardware, and control software with a graphical user interface. The integrated system is capable of multi-electrode recording and simultaneous patterned microstimulation triggered by recordings with minimal stimulation artifact. The potential applications of closed-loop systems as research tools and clinical treatments are broad; we provide one example where epileptic activity recorded by a multi-electrode probe is used to trigger targeted stimulation, via that probe, to freely moving rodents.

  8. Characterization of the plasma-switch interaction in the LBL HIF ion source

    International Nuclear Information System (INIS)

    Hewett, D.W.; Rutkowski, H.L.

    1990-01-01

    A new way to characterize the performance of the LBL HIF ion source has been found. In the LBL source, ions are drawn from an arc-generated plasma reservoir in which the electrons are confined by a negative-biased ''switch'' mesh. Stagnation of the plasma is prevented by absorption of the excess ion flow on this mesh. The ion beam is generated by an external negative voltage that provides Child-Langmuir extraction of the ions through the switch mesh. We elucidate the physics requirements of the source and deduce switch mesh parameters needed for successful operation. 2 refs., 2 figs

  9. Harmonic Analysis and Mitigation of Low- Frequency Switching Voltage Source Inverter with Auxiliary VSI

    DEFF Research Database (Denmark)

    Bai, Haofeng; Wang, Xiongfei; Blaabjerg, Frede

    2018-01-01

    The output currents of high-power Voltage Source Inverters (VSIs) are distorted by the switching harmonics and the background harmonics in the grid voltage. This paper presents an active harmonic filtering scheme for high-power, low-frequency switching VSIs with an additional auxiliary VSI. In th...

  10. Electron beam potential measurements on an inductive-store, opening-switch accelerator

    International Nuclear Information System (INIS)

    Riordan, J.C.; Goyer, J.R.; Kortbawi, D.; Meachum, J.S.; Mendenhall, R.S.; Roth, I.S.

    1993-01-01

    Direct measurement of the accelerating potential in a relativistic electron beam accelerator is difficult, particularly when the diode is downstream from a plasma opening switch. An indirect potential measurement can be obtained from the high energy tail of the bremsstrahlung spectrum generated as the electron beam strikes the anode. The authors' time-resolved spectrometer contains 7 silicon pin diode detectors filtered with 2 to 15 mm of lead to span an electron energy range of 0.5 to 2 MeV. A Monte-Carlo transport code was used to provide calibration curves, and the resulting potential measurements have been confirmed in experiments on the PITHON accelerator. The spectrometer has recently been deployed on PM1, an inductive-store, opening-switch testbed. The diode voltage measurements from the spectrometer are in good agreement with the diode voltage measured upstream and corrected using transmission line relations. The x-ray signal and spectral voltage rise 10 ns later than the corrected electrical voltage, however, indicating plasma motion between the opening switch and the diode

  11. An Open Source Extensible Smart Energy Framework

    Energy Technology Data Exchange (ETDEWEB)

    Rankin, Linda [V-Squared, Portland, OR (United States)

    2017-03-23

    Aggregated distributed energy resources are the subject of much interest in the energy industry and are expected to play an important role in meeting our future energy needs by changing how we use, distribute and generate electricity. This energy future includes an increased amount of energy from renewable resources, load management techniques to improve resiliency and reliability, and distributed energy storage and generation capabilities that can be managed to meet the needs of the grid as well as individual customers. These energy assets are commonly referred to as Distributed Energy Resources (DER). DERs rely on a means to communicate information between an energy provider and multitudes of devices. Today DER control systems are typically vendor-specific, using custom hardware and software solutions. As a result, customers are locked into communication transport protocols, applications, tools, and data formats. Today’s systems are often difficult to extend to meet new application requirements, resulting in stranded assets when business requirements or energy management models evolve. By partnering with industry advisors and researchers, an implementation DER research platform was developed called the Smart Energy Framework (SEF). The hypothesis of this research was that an open source Internet of Things (IoT) framework could play a role in creating a commodity-based eco-system for DER assets that would reduce costs and provide interoperable products. SEF is based on the AllJoynTM IoT open source framework. The demonstration system incorporated DER assets, specifically batteries and smart water heaters. To verify the behavior of the distributed system, models of water heaters and batteries were also developed. An IoT interface for communicating between the assets and a control server was defined. This interface supports a series of “events” and telemetry reporting, similar to those defined by current smart grid communication standards. The results of this

  12. The 2015 Bioinformatics Open Source Conference (BOSC 2015).

    Science.gov (United States)

    Harris, Nomi L; Cock, Peter J A; Lapp, Hilmar; Chapman, Brad; Davey, Rob; Fields, Christopher; Hokamp, Karsten; Munoz-Torres, Monica

    2016-02-01

    The Bioinformatics Open Source Conference (BOSC) is organized by the Open Bioinformatics Foundation (OBF), a nonprofit group dedicated to promoting the practice and philosophy of open source software development and open science within the biological research community. Since its inception in 2000, BOSC has provided bioinformatics developers with a forum for communicating the results of their latest efforts to the wider research community. BOSC offers a focused environment for developers and users to interact and share ideas about standards; software development practices; practical techniques for solving bioinformatics problems; and approaches that promote open science and sharing of data, results, and software. BOSC is run as a two-day special interest group (SIG) before the annual Intelligent Systems in Molecular Biology (ISMB) conference. BOSC 2015 took place in Dublin, Ireland, and was attended by over 125 people, about half of whom were first-time attendees. Session topics included "Data Science;" "Standards and Interoperability;" "Open Science and Reproducibility;" "Translational Bioinformatics;" "Visualization;" and "Bioinformatics Open Source Project Updates". In addition to two keynote talks and dozens of shorter talks chosen from submitted abstracts, BOSC 2015 included a panel, titled "Open Source, Open Door: Increasing Diversity in the Bioinformatics Open Source Community," that provided an opportunity for open discussion about ways to increase the diversity of participants in BOSC in particular, and in open source bioinformatics in general. The complete program of BOSC 2015 is available online at http://www.open-bio.org/wiki/BOSC_2015_Schedule.

  13. Open source engineering and sustainability tools for the built environment

    NARCIS (Netherlands)

    Coenders, J.L.

    2013-01-01

    This paper presents two novel open source software developments for design and engineering in the built environment. The first development, called “sustainability-open” [1], aims on providing open source design, analysis and assessment software source code for (environmental) performance of

  14. Novel, Four-Switch, Z-Source Three-Phase Inverter

    DEFF Research Database (Denmark)

    Antal, Robert; Muntean, Nicolae; Boldea, Ion

    2010-01-01

    This paper presents a new z-source three phase inverter topology. The proposed topology combines the advantages of a traditional four-switch three-phase inverter with the advantages of the z impedance network (one front-end diode, two inductors and two X connected capacitors). This new topology......, besides the self-boost property, has low switch count and it can operate as a buck-boost inverter. In contrast to standard four-switch three-phase inverter which operates at half dc input voltage the proposed four-switch z-source inverter, by self boosting, brings the output voltage at same (or higher......) value as in six switch standard three-phase inverter. The article presents the derivation of the equations describing the operation of the converter based on space vector analysis, validation through digital simulations in PSIM and preliminary experimental results on a laboratory setup with a dsPIC30F...

  15. How Open Source Has Changed the Software Industry: Perspectives from Open Source Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Risto Rajala

    2012-01-01

    Full Text Available The emergence of F/LOSS (free/libre open source software has triggered several changes in the software industry. F/LOSS has been cited as an archetypal form of open innovation; it consists of the convergence and collaboration of like-minded parties. An increasing number of software firms have taken upon this approach to link outsiders into their service development and product design. Also, software firms have been increasingly grounded their business models on user-centric and service-oriented operations. This article describes a study that investigates these changes from the perspective of F/LOSS entrepreneurs. The findings are summarized into four issues that are critical in managing an F/LOSS business: i dealing with organizational changes in the innovation process; ii mastering user involvement; iii successfully using resources; and iv designing revenue models.

  16. Explosively formed fuse opening switches for use in flux-compression generator circuits

    International Nuclear Information System (INIS)

    Goforth, J.H.; Marsh, S.P.

    1990-01-01

    Explosive-driven magnetic flux compression generators (explosive generators) provide for the generation of large amounts of energy compactly stored in a magnetic field. Opening switches for use in explosive generator circuits allow the energy to be used for applications requiring higher power than can be developed by the generators themselves. The authors have developed a type of opening switch that they describe as an explosively formed fuse (EEF). These switches are well suited to explosive generator circuits and provide a considerable enhancement of explosive pulsed-power capability. The authors first experiments with explosively formed fuses occurred while attempting to utilize the enhanced pressure developed in the high-pressure interaction between two detonation fronts. In these tests they attempted to use the interaction to sever conducting plates along lines perpendicular to current flow. The technique worked to some extent, and to ascertain how much advantage was gained from the high-pressure interaction, they substituted an areal detonation in place of the discrete lines required to produce lines of interaction. This paper describes the authors development effort, the state of the art, and the different manifestations of their technique

  17. The case for open-source software in drug discovery.

    Science.gov (United States)

    DeLano, Warren L

    2005-02-01

    Widespread adoption of open-source software for network infrastructure, web servers, code development, and operating systems leads one to ask how far it can go. Will "open source" spread broadly, or will it be restricted to niches frequented by hopeful hobbyists and midnight hackers? Here we identify reasons for the success of open-source software and predict how consumers in drug discovery will benefit from new open-source products that address their needs with increased flexibility and in ways complementary to proprietary options.

  18. Performances evaluation of different open source

    Directory of Open Access Journals (Sweden)

    Arun Patel

    2016-06-01

    Full Text Available In Open sources DEMs such as SRTM, ASTER and Cartosat-1, various factors affecting the accuracy of satellite based DEM such as errors during data collection, systematic errors and unknown errors that are geographically dependent on terrain conditions cannot be avoided. For these reasons it is very necessary to check and compare the performances and validation of the above mentioned different satellite based DEMs. Accuracy assessment of these DEM has been done using DGPS points. For these points proper interpolation of the surface was developed using different interpolation techniques. For the generation of the surface the first step was converting the satellite based DEMs height into linear interpolation contour maps of 1 m interval. Then came selecting random sample points on the contour line and generating the interpolated surface using different interpolation techniques such as IDW, GPI, RBF, OK and UK, LPI, TR and BI, which are commonly used in geomorphology research. This interpolated surface helps in proper representation of the terrain and was checked under different terrain surfaces. For validation of DGPS points the height was taken for ground control points and standard statistical tests such as ME and RMSE were applied. From above investigation, it is reveals that above mention DEMs which are used for study. Cartosat-1 (30 m data product is better than SRTM (90 m and ASTER (30 m because it had produced low RMSE of 3.49 m without applying the interpolation method. Investigation also reveals after applying the interpolation techniques on this data error can be reduced. In the case of Cartosat-1 and SRTM, low RMSE and ME were produced by the BI method, where Cartosat-1 DEM had an RMSE of 3.36 m with ME of −2.74 m, respectively. But in this case, RMSE and ME of SRTM is 2.73 m and −0.36 m, respectively. BI is designed for image processing and can be used for imagery were a maximum height variation in satellite DEM and terrain

  19. Open Source Software and Open Content: Interview met Jan Hylén

    NARCIS (Netherlands)

    Lambert Berenbroek

    2005-01-01

    Jan Hylén also attending the Surf Education Days 2005, held a presentation about Open Source Software and Open Content (such as the MIT Open Courseware project and the Open Access initiative). Jan Hylén is working at the Centre for Educational Research and Innovation (CERI) of the Organization of

  20. Beyond Open Source Software: Solving Common Library Problems Using the Open Source Hardware Arduino Platform

    Directory of Open Access Journals (Sweden)

    Jonathan Younker

    2013-06-01

    Full Text Available Using open source hardware platforms like the Arduino, libraries have the ability to quickly and inexpensively prototype custom hardware solutions to common library problems. The authors present the Arduino environment, what it is, what it does, and how it was used at the James A. Gibson Library at Brock University to create a production portable barcode-scanning utility for in-house use statistics collection as well as a prototype for a service desk statistics tabulation program’s hardware interface.

  1. Open-Source Data and the Study of Homicide.

    Science.gov (United States)

    Parkin, William S; Gruenewald, Jeff

    2015-07-20

    To date, no discussion has taken place in the social sciences as to the appropriateness of using open-source data to augment, or replace, official data sources in homicide research. The purpose of this article is to examine whether open-source data have the potential to be used as a valid and reliable data source in testing theory and studying homicide. Official and open-source homicide data were collected as a case study in a single jurisdiction over a 1-year period. The data sets were compared to determine whether open-sources could recreate the population of homicides and variable responses collected in official data. Open-source data were able to replicate the population of homicides identified in the official data. Also, for every variable measured, the open-sources captured as much, or more, of the information presented in the official data. Also, variables not available in official data, but potentially useful for testing theory, were identified in open-sources. The results of the case study show that open-source data are potentially as effective as official data in identifying individual- and situational-level characteristics, provide access to variables not found in official homicide data, and offer geographic data that can be used to link macro-level characteristics to homicide events. © The Author(s) 2015.

  2. Time resolved plasma characterization in a long conduction time planar plasma opening switch

    International Nuclear Information System (INIS)

    Adler, L.K.; Greenly, J.B.; Qi, N.; Hammer, D.A.

    1989-01-01

    The authors discuss additional experiments in which the plasma dynamics and properties will be monitored in detail before and during opening. Space and time resolved density, temperature and motion information about the plasma and neutrals is given by emission spectroscopy and streak photography and correlated to the current and voltage traces. Specifically, we will look for the effects of neutrals evolving off of surfaces, stagnation of the switch plasma, and rvec J x rvec B motion of the plasma downstream of the switch. Diagnostics include current and voltage monitors, a multi-aperture biased Faraday cup, emission spectroscopy and streak photography. Pairs of B dot loops are positioned in the stripline just upstream and downstream of the POS. Also, two single B loops were placed further downstream to look for bulk plasma motion. An inductive monitor gives the voltage at the upstream side of the POS and the Faraday cup monitors the gun plasma consistency from shot to shot

  3. Recent progress in Open Data production and consumption - examples from a Governmental institute (SMHI) and a collaborative EU research project (SWITCH-ON)

    Science.gov (United States)

    Arheimer, Berit; Falkenroth, Esa

    2014-05-01

    The Swedish Meteorological and Hydrological Institute (SMHI) has a long tradition both in producing and consuming open data on a national, European and global scale. It is also promoting community building among water scientists in Europe by participating in and initiating collaborative projects. This presentation will exemplify the contemporary European movement imposed by the INSPIRE directive and the Open Data Strategy, by showing the progress in openness and shift in attitudes during the last decade when handling Research Data and Public Sector Information at a national European institute. Moreover, the presentation will inform about a recently started collaborative project (EU FP7 project No 603587) coordinated by SMHI and called SWITCH-ON http://water-switch-on.eu/. The project addresses water concerns and currently untapped potential of open data for improved water management across the EU. The overall goal of the project is to make use of open data, and add value to society by repurposing and refining data from various sources. SWITCH-ON will establish new forms of water research and facilitate the development of new products and services based on principles of sharing and community building in the water society. The SWITCH-ON objectives are to use open data for implementing: 1) an innovative spatial information platform with open data tailored for direct water assessments, 2) an entirely new form of collaborative research for water-related sciences, 3) fourteen new operational products and services dedicated to appointed end-users, 4) new business and knowledge to inform individual and collective decisions in line with the Europe's smart growth and environmental objectives. The presentation will discuss challenges, progress and opportunities with the open data strategy, based on the experiences from working both at a Governmental institute and being part of the global research community.

  4. Documenting open source migration processes for re-use

    CSIR Research Space (South Africa)

    Gerber, A

    2010-10-01

    Full Text Available There are several sources that indicate a remarkable increase in the adoption of open source software (OSS) into the technology infrastructure of organizations. In fact, the number of medium to large organizations without some OSS installations...

  5. State-of-the-practice and lessons learned on implementing open data and open source policies.

    Science.gov (United States)

    2012-05-01

    This report describes the current government, academic, and private sector practices associated with open data and open source application development. These practices are identified; and the potential uses with the ITS Programs Data Capture and M...

  6. Open Source Intelligence - Doctrine's Neglected Child

    National Research Council Canada - National Science Library

    Pham, Tuan

    2003-01-01

    .... The causes of this neglect are many, ranging from previously mentioned predisposition toward classified intelligence sources to the technical challenge of information excess that overloads the users...

  7. Experimental investigation of the material surface modification in microsecond plasma opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Bystritskij, V; Grigor` ev, S; Kharlov, A; Sinebryukhov, A [Russian Academy of Sciences, Tomsk (Russian Federation). Institute of Electrophysics; Burkov, P [Russian Academy of Scinces, Tomsk (Russian Federation). Institute of Strength Physics and Materials Control; Grigorev, V; Koval, T [Institute of Nuclear Physics, Tomsk (Russian Federation)

    1997-12-31

    The paper is devoted to the investigations of the material surface modification by high power ion beam generated in microsecond plasma opening switch (MPOS). Various types of steels were investigated: stainless steel 17-4PH, carbon steel C1020, pure iron. For all these materials, the optimal regimes for irradiation were defined. A significant increase in microhardness (1.5 to 2-fold) was obtained for these materials. Numerical calculations and theoretical estimations of the ion beam-matter interaction were also performed. The advantages and problems of this approach are discussed. (author). 8 figs., 3 refs.

  8. Can open-source R&D reinvigorate drug research?

    Science.gov (United States)

    Munos, Bernard

    2006-09-01

    The low number of novel therapeutics approved by the US FDA in recent years continues to cause great concern about productivity and declining innovation. Can open-source drug research and development, using principles pioneered by the highly successful open-source software movement, help revive the industry?

  9. Open Source Communities in Technical Writing: Local Exigence, Global Extensibility

    Science.gov (United States)

    Conner, Trey; Gresham, Morgan; McCracken, Jill

    2011-01-01

    By offering open-source software (OSS)-based networks as an affordable technology alternative, we partnered with a nonprofit community organization. In this article, we narrate the client-based experiences of this partnership, highlighting the ways in which OSS and open-source culture (OSC) transformed our students' and our own expectations of…

  10. Open Source Library Management Systems: A Multidimensional Evaluation

    Science.gov (United States)

    Balnaves, Edmund

    2008-01-01

    Open source library management systems have improved steadily in the last five years. They now present a credible option for small to medium libraries and library networks. An approach to their evaluation is proposed that takes account of three additional dimensions that only open source can offer: the developer and support community, the source…

  11. A Survey of Open Source Tools for Business Intelligence

    DEFF Research Database (Denmark)

    Thomsen, Christian; Pedersen, Torben Bach

    2009-01-01

    The industrial use of open source Business Intelligence (BI) tools is becoming more common, but is still not as widespread as for other types of software. It is therefore of interest to explore which possibilities are available for open source BI and compare the tools. In this survey paper, we co...

  12. Open source workflow : a viable direction for BPM?

    NARCIS (Netherlands)

    Wohed, P.; Russell, N.C.; Hofstede, ter A.H.M.; Andersson, B.; Aalst, van der W.M.P.; Bellahsène, Z.; Léonard, M.

    2008-01-01

    With the growing interest in open source software in general and business process management and workflow systems in particular, it is worthwhile investigating the state of open source workflow management. The plethora of these offerings (recent surveys such as [4,6], each contain more than 30 such

  13. Migrations of the Mind: The Emergence of Open Source Education

    Science.gov (United States)

    Glassman, Michael; Bartholomew, Mitchell; Jones, Travis

    2011-01-01

    The authors describe an Open Source approach to education. They define Open Source Education (OSE) as a teaching and learning framework where the use and presentation of information is non-hierarchical, malleable, and subject to the needs and contributions of students as they become "co-owners" of the course. The course transforms itself into an…

  14. Integrating an Automatic Judge into an Open Source LMS

    Science.gov (United States)

    Georgouli, Katerina; Guerreiro, Pedro

    2011-01-01

    This paper presents the successful integration of the evaluation engine of Mooshak into the open source learning management system Claroline. Mooshak is an open source online automatic judge that has been used for international and national programming competitions. although it was originally designed for programming competitions, Mooshak has also…

  15. Open Source Initiative Powers Real-Time Data Streams

    Science.gov (United States)

    2014-01-01

    Under an SBIR contract with Dryden Flight Research Center, Creare Inc. developed a data collection tool called the Ring Buffered Network Bus. The technology has now been released under an open source license and is hosted by the Open Source DataTurbine Initiative. DataTurbine allows anyone to stream live data from sensors, labs, cameras, ocean buoys, cell phones, and more.

  16. The open-source movement: an introduction for forestry professionals

    Science.gov (United States)

    Patrick Proctor; Paul C. Van Deusen; Linda S. Heath; Jeffrey H. Gove

    2005-01-01

    In recent years, the open-source movement has yielded a generous and powerful suite of software and utilities that rivals those developed by many commercial software companies. Open-source programs are available for many scientific needs: operating systems, databases, statistical analysis, Geographic Information System applications, and object-oriented programming....

  17. Open Source for Knowledge and Learning Management: Strategies beyond Tools

    Science.gov (United States)

    Lytras, Miltiadis, Ed.; Naeve, Ambjorn, Ed.

    2007-01-01

    In the last years, knowledge and learning management have made a significant impact on the IT research community. "Open Source for Knowledge and Learning Management: Strategies Beyond Tools" presents learning and knowledge management from a point of view where the basic tools and applications are provided by open source technologies.…

  18. Open Source and These United States

    Science.gov (United States)

    1999-04-01

    observed, ".. programming is more than an important practical art. It is also a gigantic undertaking in the foundations of knowledge." 8 The ideas behind...lifetime of open licensed systems can be extended indefinitely. Vendors can diagnose difficulties even if they did not originally develop the system

  19. Learning from hackers: open-source clinical trials.

    Science.gov (United States)

    Dunn, Adam G; Day, Richard O; Mandl, Kenneth D; Coiera, Enrico

    2012-05-02

    Open sharing of clinical trial data has been proposed as a way to address the gap between the production of clinical evidence and the decision-making of physicians. A similar gap was addressed in the software industry by their open-source software movement. Here, we examine how the social and technical principles of the movement can guide the growth of an open-source clinical trial community.

  20. Institutional and pedagogical criteria for productive open source learning environments

    DEFF Research Database (Denmark)

    Svendsen, Brian Møller; Ryberg, Thomas; Semey, Ian Peter

    2004-01-01

    In this article we present some institutional and pedagogical criteria for making an informed decision in relation to identifying and choosing a productive open source learning environment. We argue that three concepts (implementation, maintainability and further development) are important when...... considering the sustainability and cost efficiency of an open source system, and we outline a set of key points for evaluating an open source software in terms of cost of system adoption. Furthermore we identify a range of pedagogical concepts and criteria to emphasize the importance of considering...... the relation between the local pedagogical practice and the pedagogical design of the open source learning environment. This we illustrate through an analysis of an open source system and our own pedagogical practice at Aalborg University, Denmark (POPP)....

  1. Open source system options for librarians and archivists

    CERN Document Server

    Tomer, Christinger

    2019-01-01

    The importance of open source systems in the context of libraries and archives is perhaps greater now than ever before. This book explains the essentials of open source systems to benefit academic and public librarians and archivists who have a vested interest in the future of integrated online library systems. Author Christinger Tomer, who has studied open source systems for more than two decades and used them extensively in both teaching and consulting, provides brief histories of both library automation and open source software, in the latter instance focusing on aspects that have more directly influenced library and archival computing. He then describes and analyzes key open source systems and critically compares them to commercial systems in terms of design, functionality, and ease of administration. The book concludes with an in-depth description of how these systems are currently being employed as well as insightful predictions about how this segment of the software environment is likely to evolve.

  2. Open source software and minority languages: a priceless opportunity

    Directory of Open Access Journals (Sweden)

    Jordi Mas

    2003-04-01

    Full Text Available Open source software is a form of software that gives its users freedom. With the advent of the Internet, open source software has consolidated as a technically viable, financially sustainable alternative to proprietary software. Languages such as Breton, Galician, Gaelic and Catalan have seen very little development in the world of proprietary software because of the limitations imposed. In contrast, in the world of open source software these languages have been developed with notable success. Open source projects of the importance of the Mozilla browser, the GNOME environment and the GNU/Linux system have complete or partial translations in all these languages. Open source software presents an unprecedented opportunity for the development of minority languages, such as Catalan, in new technologies thanks to the freedom that they guarantee us.

  3. Managerial Perspective on Open Source Collaboration and Networked Innovation

    Directory of Open Access Journals (Sweden)

    Henttonen Maaret Katja

    2012-09-01

    Full Text Available This study explores the managerial perspectives towards open source software and networked innovation. We analysed six software companies who use open source software as a significant part of their product or service offering. The study found notable differences in managerial attitudes, expected benefits and key challenges related to open source software and its role in innovative activities. While all companies were using same pieces of software with open source communities, there were different levels of engagement in the development of the software and information flows between companies and communities. A deeper level of involvement enables the exchange of more than just the code: like ideas, influences, opinions and even innovations or parts of them. The differences in managerial views on open source and networked innovation may be explained by industry domains, value chain position and leadership style

  4. Governance of Open Source Software Foundations: Who Holds the Power?

    Directory of Open Access Journals (Sweden)

    Ludovico Prattico

    2012-12-01

    Full Text Available The research reported in this article attempts to discover who holds the power in open source software foundations through the analysis of governance documents. Artificial neural network analysis is used to analyse the content of the bylaws of six open source foundations (Apache, Eclipse, GNOME, Plone, Python, and SPI for the purpose of identifying power structures. Results of the research suggest that: i the actions of an open source software foundation are centered around one of three groups: Members, Chairman/President/Executive Director, and Board of Directors; ii in only one of the six foundations is the Board of Directors responsible for both the community and the product; and iii artificial neural network analysis of the content of bylaws provides unbiased insights of the power structure of open source software foundations. These results may prove useful to those who contribute to open source foundations and use their products and services.

  5. Research on OpenStack of open source cloud computing in colleges and universities’ computer room

    Science.gov (United States)

    Wang, Lei; Zhang, Dandan

    2017-06-01

    In recent years, the cloud computing technology has a rapid development, especially open source cloud computing. Open source cloud computing has attracted a large number of user groups by the advantages of open source and low cost, have now become a large-scale promotion and application. In this paper, firstly we briefly introduced the main functions and architecture of the open source cloud computing OpenStack tools, and then discussed deeply the core problems of computer labs in colleges and universities. Combining with this research, it is not that the specific application and deployment of university computer rooms with OpenStack tool. The experimental results show that the application of OpenStack tool can efficiently and conveniently deploy cloud of university computer room, and its performance is stable and the functional value is good.

  6. Energetic ion emission in a positive polarity nanosecond plasma opening switch

    International Nuclear Information System (INIS)

    Sarfaty, M.; Krasik, Ya.E.; Weingarten, A.; Fruchtman, A.; Maron, Y.

    1996-01-01

    The emission was studied of energetic ions from the plasma in a coaxial Plasma Opening Switch (POS) powered by a 300 kV, 15 kA, 90 ns positive polarity pulse. Fluxes lasting 2 - 3 ns of ions flowing radially onto the cathode were observed at all axial locations of the switch plasma within 5 ns of the beginning of the upstream POS current. It is suggested that the termination of this ion flux is due to the formation of a cathode plasma, which is consistent with our spectroscopic measurements. Later in the pulse, longer duration (100 ns) ion fluxes were observed radially, first appearing in the generator side of the switch plasma. Fluxes 30 - 40 ns long of ions flowing axially towards the POS load at velocities (2±1) x 10 8 cm/s were also observed. The dependences of the start time of the axial ion flow, of the ion velocities, and of the ion flux on the POS operation parameters were studied. (author). 6 figs., 5 refs

  7. Energetic ion emission in a positive polarity nanosecond plasma opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Sarfaty, M [Univ. of Wisconsin, Madison, WI (United States); Krasik, Ya E; Weingarten, A; Fruchtman, A; Maron, Y [Weizmann Institute of Science, Rehovot (Israel). Department of Physics

    1997-12-31

    The emission was studied of energetic ions from the plasma in a coaxial Plasma Opening Switch (POS) powered by a 300 kV, 15 kA, 90 ns positive polarity pulse. Fluxes lasting 2 - 3 ns of ions flowing radially onto the cathode were observed at all axial locations of the switch plasma within 5 ns of the beginning of the upstream POS current. It is suggested that the termination of this ion flux is due to the formation of a cathode plasma, which is consistent with our spectroscopic measurements. Later in the pulse, longer duration (100 ns) ion fluxes were observed radially, first appearing in the generator side of the switch plasma. Fluxes 30 - 40 ns long of ions flowing axially towards the POS load at velocities (2{+-}1) x 10{sup 8} cm/s were also observed. The dependences of the start time of the axial ion flow, of the ion velocities, and of the ion flux on the POS operation parameters were studied. (author). 6 figs., 5 refs.

  8. Dynamics of the Energy Transfer to the Load During the Operation of a Plasma Opening Switch

    International Nuclear Information System (INIS)

    Dolinsky, Yu.; Krasik, Ya.E.; Felsteiner, J.

    1999-01-01

    The main efforts of the theoretical and experimental studies related to the Plasma Opening Switch (POS) have been devoted to the understanding of an anomalous fast magnetic field penetration through the plasma. At present this phenomenon can be explained based on the electron magnetohydrodynamic theory.l The second important phenomenon is related with POS opening. Existing models explain POS opening as a result of cut-off of the electron current component in the double layer2 by self-magnetic field of the POS current or by the increase of the Hall potential in the current layer due to ion erosion.3 Nevertheless both models consider POS opening in the region which was preliminary occupied by the plasma. In a recent experiment4 it was shown that the POS opening is related with a fast charged particle flow in the downstream region, namely at the load. In this work we present results of theoretical studies of the phase of the POS operation when the self-magnetic field of the POS current appears at the downstream side of the plasma. Our study has been done within the framework of two-fluid magnetohydrodynamic theory. Taking into account the Hall electric field which is responsible for a strong ion acceleration in the axial direction, we found the velocity of the ions. In addition we show, that due to the inductive electric field caused by the motion of the axial current carrying plasma, the velocity of the magnetic field penetration is equal to the Alfven velocity

  9. Practical Experiences of Building an IPFIX Based Open Source Botnet Detector

    Directory of Open Access Journals (Sweden)

    Mark Graham

    2016-03-01

    Full Text Available The academic study of flow-based malware detection has primarily focused on NetFlow v5 and v9. In 2013 IPFIX was ratified as the flow export standard. As part of a larger project to develop protection methods for Cloud Service Providers from botnet threats, this paper considers the challenges involved in designing an open source IPFIX based botnet detection function. This paper describes how these challenges were overcome and presents an open source system built upon Xen hypervisor and Open vSwitch that is able to display botnet traffic within Cloud Service Provider-style virtualised environments. The system utilises Euler property graphs to display suspect “botnests”. The conceptual framework presented provides a vendor-neutral, real-time detection mechanism for monitoring botnet communication traffic within cloud architectures and the Internet of Things.

  10. Two-dimensional single fluid MHD simulations of plasma opening switches

    International Nuclear Information System (INIS)

    Roderick, N.F.; Payne, S.S.; Peterkin, R.E. Jr.; Frese, M.H.; Hussey, T.W.

    1989-01-01

    Simulations of plasma opening switch have been made using two-dimensional, single fluid, magnetohydrodynamic codes HAM and MACH2. A variety of mechanisms for magnetic field penetration have been investigated. These include plasma convection, classical and microturbulent resistive diffusion, and Hall effect transport. We find that plasma microturbulent models are necessary to explain the broad current channels observed in experiments. Both heuristic and consistent microturbulent models are able to explain observed channel widths and penetration features. The best results are obtained for a consistent model that includes the Buneman, ion acoustic, and lower hybrid microturbulent collision frequencies and threshold conditions. Maximum microturbulent collision frequencies of 5 ω p , are typical. Field transport and current channel profiles are in excellent agreement with experimental observations for GAMBLE I, GAMBLE II, and SUPERMITE experiments. Dominant field penetration mechanisms and center of mass plasma motion are current and density dependent. Including the Hall effect enhanced field penetration. Center of mass motion is negligible for the GAMBLE I experiments but significant for the GAMBLE II conditions. Scaling of plasma opening time with switch length and density can be fit by linear representations for lengths from 0.03 m to 0.24 m and ion densities from 10 18 m -3 to 1.5 times 10 19 m -3 . 15 refs., 7 figs., 1 tab

  11. Open source intelligence: A tool to combat illicit trafficking

    Energy Technology Data Exchange (ETDEWEB)

    Sjoeberg, J [Swedish Armed Forces HQ, Stockholm (Sweden)

    2001-10-01

    The purpose of my presentation is to provide some thoughts on Open Sources and how Open Sources can be used as tools for detecting illicit trafficking and proliferation. To fulfill this purpose I would like to deal with the following points during my presentation: What is Open Source? How can it be defined? - Different sources - Methods. Open Source information can be defined as publicly available information as well as other unclassified information that has limited public distribution or access to it. It comes in print, electronic or oral form. It can be found distributed either to the mass public by print or electronic media or to a much more limited customer base like companies, experts or specialists of some kind including the so called gray literature. Open Source information is not a single source but a multi-source. Thus, you can say that Open Sources does not say anything about the information itself, it only refers to if the information is classified or not.

  12. Open source intelligence: A tool to combat illicit trafficking

    International Nuclear Information System (INIS)

    Sjoeberg, J.

    2001-01-01

    The purpose of my presentation is to provide some thoughts on Open Sources and how Open Sources can be used as tools for detecting illicit trafficking and proliferation. To fulfill this purpose I would like to deal with the following points during my presentation: What is Open Source? How can it be defined? - Different sources - Methods. Open Source information can be defined as publicly available information as well as other unclassified information that has limited public distribution or access to it. It comes in print, electronic or oral form. It can be found distributed either to the mass public by print or electronic media or to a much more limited customer base like companies, experts or specialists of some kind including the so called gray literature. Open Source information is not a single source but a multi-source. Thus, you can say that Open Sources does not say anything about the information itself, it only refers to if the information is classified or not

  13. Dilemmas within Commercial Involvement in Open Source Software

    DEFF Research Database (Denmark)

    Ciesielska, Malgorzata; Westenholz, Ann

    2016-01-01

    to free-riding. There are six levels of commercial involvement in open source communities, and each of them is characterized by a different dilemma. Originality/value – The paper sheds light on the various level of involvement of business in open source movement and emphasize that the popularized “open......Purpose – The purpose of this paper is to contribute to the literature about the commercial involvement in open source software, levels of this involvement and consequences of attempting to mix various logics of action. Design/methodology/approach – This paper uses the case study approach based...... on mixed methods: literature reviews and news searches, electronic surveys, qualitative interviews and observations. It combines discussions from several research projects as well as previous publications to present the scope of commercial choices within open source software and their consequences...

  14. OpenSesame: An Open-source, Graphical Experiment Builder for the Social Sciences

    NARCIS (Netherlands)

    Mathot, S.; Schreij, D.B.B.; Theeuwes, J.

    2012-01-01

    In the present article, we introduce OpenSesame, a graphical experiment builder for the social sciences. OpenSesame is free, open-source, and cross-platform. It features a comprehensive and intuitive graphical user interface and supports Python scripting for complex tasks. Additional functionality,

  15. Controlled lid-opening in Thermomyces lanuginosus lipase- An engineered switch for studying lipase function

    DEFF Research Database (Denmark)

    Skjold-Jørgensen, Jakob; Vind, Jesper; Moroz, Olga V.

    2017-01-01

    Here, we present a lipase mutant containing a biochemical switch allowing a controlled opening and closing of the lid independent of the environment. The closed form of the TlL mutant shows low binding to hydrophobic surfaces compared to the binding observed after activating the controlled switch...... inducing lid-opening. We directly show that lipid binding of this mutant is connected to an open lid conformation demonstrating the impact of the exposed amino acid residues and their participation in binding at the water-lipid interface. The switch was created by introducing two cysteine residues......-D measurements revealed a seven-fold increase in binding rate for the unlocked lipase. The TlL_locked mutant shows structural changes across the protein important for understanding the mechanism of lid-opening and closing. Our experimental results reveal sites of interest for future mutagenesis studies aimed...

  16. OpenBook WordPress Plugin: Open Source Access to Bibliographic Data

    Directory of Open Access Journals (Sweden)

    John Miedema

    2008-09-01

    Full Text Available OpenBook is a WordPress PHP plugin that implements the Open Library APIs to insert book covers, titles, authors and publishers into web pages. The motive behind the development was to provide an easy alternative to the common practice of linking to Amazon. Open Library was selected as a data source because it is both open source and open data.The plugin is useful for book reviewers, library webmasters, anyone who wants to put book covers and data on their WordPress blog or website. The plugin also allows users to add links to publisher websites, a feature that was considered significant to independent publishers.

  17. Code Forking, Governance, and Sustainability in Open Source Software

    Directory of Open Access Journals (Sweden)

    Juho Lindman

    2013-01-01

    Full Text Available The right to fork open source code is at the core of open source licensing. All open source licenses grant the right to fork their code, that is to start a new development effort using an existing code as its base. Thus, code forking represents the single greatest tool available for guaranteeing sustainability in open source software. In addition to bolstering program sustainability, code forking directly affects the governance of open source initiatives. Forking, and even the mere possibility of forking code, affects the governance and sustainability of open source initiatives on three distinct levels: software, community, and ecosystem. On the software level, the right to fork makes planned obsolescence, versioning, vendor lock-in, end-of-support issues, and similar initiatives all but impossible to implement. On the community level, forking impacts both sustainability and governance through the power it grants the community to safeguard against unfavourable actions by corporations or project leaders. On the business-ecosystem level forking can serve as a catalyst for innovation while simultaneously promoting better quality software through natural selection. Thus, forking helps keep open source initiatives relevant and presents opportunities for the development and commercialization of current and abandoned programs.

  18. Guidelines for the implementation of an open source information system

    Energy Technology Data Exchange (ETDEWEB)

    Doak, J.; Howell, J.A.

    1995-08-01

    This work was initially performed for the International Atomic Energy Agency (IAEA) to help with the Open Source Task of the 93 + 2 Initiative; however, the information should be of interest to anyone working with open sources. The authors cover all aspects of an open source information system (OSIS) including, for example, identifying relevant sources, understanding copyright issues, and making information available to analysts. They foresee this document as a reference point that implementors of a system could augment for their particular needs. The primary organization of this document focuses on specific aspects, or components, of an OSIS; they describe each component and often make specific recommendations for its implementation. This document also contains a section discussing the process of collecting open source data and a section containing miscellaneous information. The appendix contains a listing of various providers, producers, and databases that the authors have come across in their research.

  19. Open Source, Open Innovation and Intellectual Property Rights – A Lightning Talk

    OpenAIRE

    Kilamo , Terhi; Hammouda , Imed; Kairamo , Ville; Räsänen , Petri; Saarinen , Jukka ,

    2012-01-01

    Part 2: Lightning Talks; International audience; Open innovation projects are fast paced aiming at producing a quick proof of concept of an innovative software product. This need for speedy results makes the use of open source components as a basis for the work appealing. Open source brings with it an inherent risk of license conflicts that may become an issue when aiming to develope an innovative demo into an actual product. In this study, the first results of investigating the knowledge the...

  20. A survey of open source tools for business intelligence

    DEFF Research Database (Denmark)

    Thomsen, Christian; Pedersen, Torben Bach

    2005-01-01

    The industrial use of open source Business Intelligence (BI) tools is not yet common. It is therefore of interest to explore which possibilities are available for open source BI and compare the tools. In this survey paper, we consider the capabilities of a number of open source tools for BI....... In the paper, we consider three Extract-Transform-Load (ETL) tools, three On-Line Analytical Processing (OLAP) servers, two OLAP clients, and four database management systems (DBMSs). Further, we describe the licenses that the products are released under. It is argued that the ETL tools are still not very...

  1. Epistemic Communities, Situated Learning and Open Source Software Development

    DEFF Research Database (Denmark)

    Edwards, Kasper

    2001-01-01

    This paper analyses open source software (OSS) development as an epistemic community where each individual project is perceived as a single epistemic community. OSS development is a learning process where the involved parties contribute to, and learn from the community. It is discovered that theory...... of epistemic communities does indeed contribute to the understanding of open source software development. But, the important learning process of open source software development is not readily explained. The paper then introduces situated learning and legitimate peripheral participation as theoretical...

  2. Open source R&D - an anomaly in innovation management?

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2004-01-01

    This paper addresses innovations based on the principle of open source or non-proprietary knowledge. Viewed through the lens of private property theory, such agency appears to be a true anomaly. However, by a further turn of the theoretical kaleidoscope, we will show that there may be perfectly...... justifiable reasons for not regarding open source innovations as anomalies. The paper has identified three generic cases of open source innovation, which is an offspring of contemporary theory made possible by combining elements of the model of private agency with those of the model of collective agency...

  3. Diagnosis and Tolerant Strategy of an Open-Switch Fault for T-type Three-Level Inverter Systems

    DEFF Research Database (Denmark)

    Choi, Uimin; Lee, Kyo Beum; Blaabjerg, Frede

    2014-01-01

    This paper proposes a new diagnosis method of an open-switch fault and fault-tolerant control strategy for T-type three-level inverter systems. The location of faulty switch can be identified by the average of normalized phase current and the change of the neutral-point voltage. The proposed fault......-tolerant strategy is explained by dividing into two cases: the faulty condition of half-bridge switches and the neutral-point switches. The performance of the T-type inverter system improves considerably by the proposed fault tolerant algorithm when a switch fails. The roposed method does not require additional...... components and complex calculations. Simulation and experimental results verify the feasibility of the proposed fault diagnosis and fault-tolerant control strategy....

  4. Integrating Free and Open Source Solutions into Geospatial Science Education

    Directory of Open Access Journals (Sweden)

    Vaclav Petras

    2015-06-01

    Full Text Available While free and open source software becomes increasingly important in geospatial research and industry, open science perspectives are generally less reflected in universities’ educational programs. We present an example of how free and open source software can be incorporated into geospatial education to promote open and reproducible science. Since 2008 graduate students at North Carolina State University have the opportunity to take a course on geospatial modeling and analysis that is taught with both proprietary and free and open source software. In this course, students perform geospatial tasks simultaneously in the proprietary package ArcGIS and the free and open source package GRASS GIS. By ensuring that students learn to distinguish between geospatial concepts and software specifics, students become more flexible and stronger spatial thinkers when choosing solutions for their independent work in the future. We also discuss ways to continually update and improve our publicly available teaching materials for reuse by teachers, self-learners and other members of the GIS community. Only when free and open source software is fully integrated into geospatial education, we will be able to encourage a culture of openness and, thus, enable greater reproducibility in research and development applications.

  5. OMPC: an Open-Source MATLAB-to-Python Compiler.

    Science.gov (United States)

    Jurica, Peter; van Leeuwen, Cees

    2009-01-01

    Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical and scientific computing. Endeavors in this direction are met with an important obstacle. MATLAB((R)), the predominant computation tool in many fields of research, is a closed-source commercial product. To facilitate the transition to an open computation platform, we propose Open-source MATLAB((R))-to-Python Compiler (OMPC), a platform that uses syntax adaptation and emulation to allow transparent import of existing MATLAB((R)) functions into Python programs. The imported MATLAB((R)) modules will run independently of MATLAB((R)), relying on Python's numerical and scientific libraries. Python offers a stable and mature open source platform that, in many respects, surpasses commonly used, expensive commercial closed source packages. The proposed software will therefore facilitate the transparent transition towards a free and general open-source lingua franca for scientific computation, while enabling access to the existing methods and algorithms of technical computing already available in MATLAB((R)). OMPC is available at http://ompc.juricap.com.

  6. Embracing Open Source for NASA's Earth Science Data Systems

    Science.gov (United States)

    Baynes, Katie; Pilone, Dan; Boller, Ryan; Meyer, David; Murphy, Kevin

    2017-01-01

    The overarching purpose of NASAs Earth Science program is to develop a scientific understanding of Earth as a system. Scientific knowledge is most robust and actionable when resulting from transparent, traceable, and reproducible methods. Reproducibility includes open access to the data as well as the software used to arrive at results. Additionally, software that is custom-developed for NASA should be open to the greatest degree possible, to enable re-use across Federal agencies, reduce overall costs to the government, remove barriers to innovation, and promote consistency through the use of uniform standards. Finally, Open Source Software (OSS) practices facilitate collaboration between agencies and the private sector. To best meet these ends, NASAs Earth Science Division promotes the full and open sharing of not only all data, metadata, products, information, documentation, models, images, and research results but also the source code used to generate, manipulate and analyze them. This talk focuses on the challenges to open sourcing NASA developed software within ESD and the growing pains associated with establishing policies running the gamut of tracking issues, properly documenting build processes, engaging the open source community, maintaining internal compliance, and accepting contributions from external sources. This talk also covers the adoption of existing open source technologies and standards to enhance our custom solutions and our contributions back to the community. Finally, we will be introducing the most recent OSS contributions from NASA Earth Science program and promoting these projects for wider community review and adoption.

  7. Open Source Radiation Hardened by Design Technology

    Science.gov (United States)

    Shuler, Robert

    2016-01-01

    The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

  8. An open-closed-loop iterative learning control approach for nonlinear switched systems with application to freeway traffic control

    Science.gov (United States)

    Sun, Shu-Ting; Li, Xiao-Dong; Zhong, Ren-Xin

    2017-10-01

    For nonlinear switched discrete-time systems with input constraints, this paper presents an open-closed-loop iterative learning control (ILC) approach, which includes a feedforward ILC part and a feedback control part. Under a given switching rule, the mathematical induction is used to prove the convergence of ILC tracking error in each subsystem. It is demonstrated that the convergence of ILC tracking error is dependent on the feedforward control gain, but the feedback control can speed up the convergence process of ILC by a suitable selection of feedback control gain. A switched freeway traffic system is used to illustrate the effectiveness of the proposed ILC law.

  9. Development of an Open Source, Air-Deployable Weather Station

    Science.gov (United States)

    Krejci, A.; Lopez Alcala, J. M.; Nelke, M.; Wagner, J.; Udell, C.; Higgins, C. W.; Selker, J. S.

    2017-12-01

    We created a packaged weather station intended to be deployed in the air on tethered systems. The device incorporates lightweight sensors and parts and runs for up to 24 hours off of lithium polymer batteries, allowing the entire package to be supported by a thin fiber. As the fiber does not provide a stable platform, additional data (pitch and roll) from typical weather parameters (e.g. temperature, pressure, humidity, wind speed, and wind direction) are determined using an embedded inertial motion unit. All designs are open sourced including electronics, CAD drawings, and descriptions of assembly and can be found on the OPEnS lab website at http://www.open-sensing.org/lowcost-weather-station/. The Openly Published Environmental Sensing Lab (OPEnS: Open-Sensing.org) expands the possibilities of scientific observation of our Earth, transforming the technology, methods, and culture by combining open-source development and cutting-edge technology. New OPEnS labs are now being established in India, France, Switzerland, the Netherlands, and Ghana.

  10. Towards the Adoption of Open Source and Open Access Electronic Health Record Systems

    Directory of Open Access Journals (Sweden)

    Ilias Maglogiannis

    2012-01-01

    Full Text Available As the Electronic Health Record (EHR systems constantly expand to support more clinical activities and their implementations in healthcare organizations become more widespread, several communities have been working intensively for several years to develop open access and open source EHR software, aiming at reducing the costs of EHR deployment and maintenance. In this paper, we describe and evaluate the most popular open source electronic medical records such as openEMR, openMRS and patientOS, providing their technical features and potentials. These systems are considered quite important due to their prevalence. The article presents the key features of each system and outlines the advantages and problems of Open Source Software (OSS Systems through a review of the literature, in order to demonstrate the possibility of their adoption in modern electronic healthcare systems. Also discussed are the future trends of OS EHRs in the context of the Personal Health Records and mobile computing paradigm.

  11. The Utility of Open Source Software in Military Systems

    National Research Council Canada - National Science Library

    Esperon, Agustin I; Munoz, Jose P; Tanneau, Jean M

    2005-01-01

    .... The companies involved were THALES and GMV. The MILOS project aimed to demonstrate benefits of Open Source Software in large software based military systems, by casting off constraints inherent to traditional proprietary COTS and by taking...

  12. Open-source software gets boost at UN

    CERN Multimedia

    Schenker, J L

    2003-01-01

    "A months-long backroom battle led by Brazil, with support from India, South Africa and China, against the United States over open-source software took center stage Wednesday at the UN information summit meeting" (1 page)

  13. The Utility of Open Source Software in Military Systems

    National Research Council Canada - National Science Library

    Esperon, Agustin I; Munoz, Jose P; Tanneau, Jean M

    2005-01-01

    The MILOS (Military Systems based on Open-source Software) project was a European research program in the Eurofinder framework, attached to the CEPA 6 and co-financed by the Ministry of Defence of France and Spain...

  14. Open source IPSEC software in manned and unmanned space missions

    Science.gov (United States)

    Edwards, Jacob

    Network security is a major topic of research because cyber attackers pose a threat to national security. Securing ground-space communications for NASA missions is important because attackers could endanger mission success and human lives. This thesis describes how an open source IPsec software package was used to create a secure and reliable channel for ground-space communications. A cost efficient, reproducible hardware testbed was also created to simulate ground-space communications. The testbed enables simulation of low-bandwidth and high latency communications links to experiment how the open source IPsec software reacts to these network constraints. Test cases were built that allowed for validation of the testbed and the open source IPsec software. The test cases also simulate using an IPsec connection from mission control ground routers to points of interest in outer space. Tested open source IPsec software did not meet all the requirements. Software changes were suggested to meet requirements.

  15. CopperCore, an Open Source IMS Learning Design Engine

    NARCIS (Netherlands)

    Vogten, Hubert

    2004-01-01

    The presentation gives an overview of the approach of the development programme of the OTEC department towards the development of Open Source. The CopperCore IMS Learning Design engine is described as an example of this approach.

  16. Open source Modeling and optimization tools for Planning

    Energy Technology Data Exchange (ETDEWEB)

    Peles, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-02-10

    Open source modeling and optimization tools for planning The existing tools and software used for planning and analysis in California are either expensive, difficult to use, or not generally accessible to a large number of participants. These limitations restrict the availability of participants for larger scale energy and grid studies in the state. The proposed initiative would build upon federal and state investments in open source software, and create and improve open source tools for use in the state planning and analysis activities. Computational analysis and simulation frameworks in development at national labs and universities can be brought forward to complement existing tools. An open source platform would provide a path for novel techniques and strategies to be brought into the larger community and reviewed by a broad set of stakeholders.

  17. OMPC: an Open-Source MATLAB?-to-Python Compiler

    OpenAIRE

    Jurica, Peter; van Leeuwen, Cees

    2009-01-01

    Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical...

  18. Python bindings for the open source electromagnetic simulator Meep

    OpenAIRE

    Lambert, Emmanuel; Fiers, Martin; Nizamov, Shavkat; Tassaert, Martijn; Johnson, Steven G; Bienstman, Peter; Bogaerts, Wim

    2011-01-01

    Meep is a broadly used open source package for finite-difference time-domain electromagnetic simulations. Python bindings for Meep make it easier to use for researchers and open promising opportunities for integration with other packages in the Python ecosystem. As this project shows, implementing Python-Meep offers benefits for specific disciplines and for the wider research community.

  19. Open Source Solutions for Libraries: ABCD vs Koha

    Science.gov (United States)

    Macan, Bojan; Fernandez, Gladys Vanesa; Stojanovski, Jadranka

    2013-01-01

    Purpose: The purpose of this study is to present an overview of the two open source (OS) integrated library systems (ILS)--Koha and ABCD (ISIS family), to compare their "next-generation library catalog" functionalities, and to give comparison of other important features available through ILS modules. Design/methodology/approach: Two open source…

  20. Modular Open-Source Software for Item Factor Analysis

    Science.gov (United States)

    Pritikin, Joshua N.; Hunter, Micheal D.; Boker, Steven M.

    2015-01-01

    This article introduces an item factor analysis (IFA) module for "OpenMx," a free, open-source, and modular statistical modeling package that runs within the R programming environment on GNU/Linux, Mac OS X, and Microsoft Windows. The IFA module offers a novel model specification language that is well suited to programmatic generation…

  1. Open-Source 3D-Printable Optics Equipment

    Science.gov (United States)

    Zhang, Chenlong; Anzalone, Nicholas C.; Faria, Rodrigo P.; Pearce, Joshua M.

    2013-01-01

    Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods. PMID:23544104

  2. A Survey Of Top 10 Open Source Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Mohamed R. Elabnody

    2015-08-01

    Full Text Available Open Source LMSs are fully flexible and customizable so they can be designed in line with your schoolorganizations brand image. Open Source LMSs can also be converted to social learning platforms. You can create an online community through your LMS. This paper describes the most important features in learning management systems LMS that are critical to compare and contrast depend on your system requirements. Also represents a multiple LMS providers that are designed to use in university environment.

  3. Open-source 3D-printable optics equipment.

    Science.gov (United States)

    Zhang, Chenlong; Anzalone, Nicholas C; Faria, Rodrigo P; Pearce, Joshua M

    2013-01-01

    Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

  4. Open-source 3D-printable optics equipment.

    Directory of Open Access Journals (Sweden)

    Chenlong Zhang

    Full Text Available Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97%, with some components representing only 1% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.

  5. Dual Z-Source Inverter With Three-Level Reduced Common-Mode Switching

    DEFF Research Database (Denmark)

    Gao, Feng; Loh, Poh Chiang; Blaabjerg, Frede

    2007-01-01

    This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck......-boost power conversion to be performed over a wide modulation range, with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye-or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter....... Modulationwise, the dual inverter can be controlled using a carefully designed carrier-based pulsewidth-modulation (PWM) scheme that will always ensure balanced voltage boosting of the Z-source network while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays...

  6. Building SDN-Based Agricultural Vehicular Sensor Networks Based on Extended Open vSwitch.

    Science.gov (United States)

    Huang, Tao; Yan, Siyu; Yang, Fan; Pan, Tian; Liu, Jiang

    2016-01-19

    Software-defined vehicular sensor networks in agriculture, such as autonomous vehicle navigation based on wireless multi-sensor networks, can lead to more efficient precision agriculture. In SDN-based vehicle sensor networks, the data plane is simplified and becomes more efficient by introducing a centralized controller. However, in a wireless environment, the main controller node may leave the sensor network due to the dynamic topology change or the unstable wireless signal, leaving the rest of network devices without control, e.g., a sensor node as a switch may forward packets according to stale rules until the controller updates the flow table entries. To solve this problem, this paper proposes a novel SDN-based vehicular sensor networks architecture which can minimize the performance penalty of controller connection loss. We achieve this by designing a connection state detection and self-learning mechanism. We build prototypes based on extended Open vSwitch and Ryu. The experimental results show that the recovery time from controller connection loss is under 100 ms and it keeps rule updating in real time with a stable throughput. This architecture enhances the survivability and stability of SDN-based vehicular sensor networks in precision agriculture.

  7. Building SDN-Based Agricultural Vehicular Sensor Networks Based on Extended Open vSwitch

    Directory of Open Access Journals (Sweden)

    Tao Huang

    2016-01-01

    Full Text Available Software-defined vehicular sensor networks in agriculture, such as autonomous vehicle navigation based on wireless multi-sensor networks, can lead to more efficient precision agriculture. In SDN-based vehicle sensor networks, the data plane is simplified and becomes more efficient by introducing a centralized controller. However, in a wireless environment, the main controller node may leave the sensor network due to the dynamic topology change or the unstable wireless signal, leaving the rest of network devices without control, e.g., a sensor node as a switch may forward packets according to stale rules until the controller updates the flow table entries. To solve this problem, this paper proposes a novel SDN-based vehicular sensor networks architecture which can minimize the performance penalty of controller connection loss. We achieve this by designing a connection state detection and self-learning mechanism. We build prototypes based on extended Open vSwitch and Ryu. The experimental results show that the recovery time from controller connection loss is under 100 ms and it keeps rule updating in real time with a stable throughput. This architecture enhances the survivability and stability of SDN-based vehicular sensor networks in precision agriculture.

  8. Building SDN-Based Agricultural Vehicular Sensor Networks Based on Extended Open vSwitch

    Science.gov (United States)

    Huang, Tao; Yan, Siyu; Yang, Fan; Pan, Tian; Liu, Jiang

    2016-01-01

    Software-defined vehicular sensor networks in agriculture, such as autonomous vehicle navigation based on wireless multi-sensor networks, can lead to more efficient precision agriculture. In SDN-based vehicle sensor networks, the data plane is simplified and becomes more efficient by introducing a centralized controller. However, in a wireless environment, the main controller node may leave the sensor network due to the dynamic topology change or the unstable wireless signal, leaving the rest of network devices without control, e.g., a sensor node as a switch may forward packets according to stale rules until the controller updates the flow table entries. To solve this problem, this paper proposes a novel SDN-based vehicular sensor networks architecture which can minimize the performance penalty of controller connection loss. We achieve this by designing a connection state detection and self-learning mechanism. We build prototypes based on extended Open vSwitch and Ryu. The experimental results show that the recovery time from controller connection loss is under 100 ms and it keeps rule updating in real time with a stable throughput. This architecture enhances the survivability and stability of SDN-based vehicular sensor networks in precision agriculture. PMID:26797616

  9. Switched-based interference reduction scheme for open-access overlaid cellular networks

    KAUST Repository

    Radaydeh, Redha Mahmoud Mesleh

    2012-06-01

    Femtocells have been proposed to enhance the spatial coverage and system capacity of existing cellular networks. However, this technology may result in significant performance loss due to the increase in co-channel interference, particularly when coordination between access points is infeasible. This paper targets interference management in such overlaid networks. It is assumed that the femtocells employ the open-access strategy to reduce cross-tier interference, and can share resources concurrently. It is also assumed that each end user (EU) can access one channel at a time, and transfer limited feedback. To reduce the effect of co-tier interference in the absence of the desired EU channel state information (CSI) at the serving access point as well as coordination between active access points, a switched scheme based on the interference levels associated with available channels is proposed. Through the analysis, the scheme modes of operation in under-loaded and over-loaded channels are studied, from which the statistics of the resulting interference power are quantified. The impact of the proposed scheme on the received desired power is thoroughly discussed. In addition, the effect of the switching threshold on the achieved performance of the desired EU is investigated. The results clarify that the proposed scheme can improve the performance while reducing the number of examined channels and feedback load. © 2012 IEEE.

  10. Open-loop correction for an eddy current dominated beam-switching magnet.

    Science.gov (United States)

    Koseki, K; Nakayama, H; Tawada, M

    2014-04-01

    A beam-switching magnet and the pulsed power supply it requires have been developed for the Japan Proton Accelerator Research Complex. To switch bunched proton beams, the dipole magnetic field must reach its maximum value within 40 ms. In addition, the field flatness should be less than 5 × 10(-4) to guide each bunched beam to the designed orbit. From a magnetic field measurement by using a long search coil, it was found that an eddy current in the thick endplates and laminated core disturbs the rise of the magnetic field. The eddy current also deteriorates the field flatness over the required flat-top period. The measured field flatness was 5 × 10(-3). By using a double-exponential equation to approximate the measured magnetic field, a compensation pattern for the eddy current was calculated. The integrated magnetic field was measured while using the newly developed open-loop compensation system. A field flatness of less than 5 × 10(-4), which is an acceptable value, was achieved.

  11. Open source electronic health records and chronic disease management.

    Science.gov (United States)

    Goldwater, Jason C; Kwon, Nancy J; Nathanson, Ashley; Muckle, Alison E; Brown, Alexa; Cornejo, Kerri

    2014-02-01

    To study and report on the use of open source electronic health records (EHR) to assist with chronic care management within safety net medical settings, such as community health centers (CHC). The study was conducted by NORC at the University of Chicago from April to September 2010. The NORC team undertook a comprehensive environmental scan, including a literature review, a dozen key informant interviews using a semistructured protocol, and a series of site visits to CHC that currently use an open source EHR. Two of the sites chosen by NORC were actively using an open source EHR to assist in the redesign of their care delivery system to support more effective chronic disease management. This included incorporating the chronic care model into an CHC and using the EHR to help facilitate its elements, such as care teams for patients, in addition to maintaining health records on indigent populations, such as tuberculosis status on homeless patients. The ability to modify the open-source EHR to adapt to the CHC environment and leverage the ecosystem of providers and users to assist in this process provided significant advantages in chronic care management. Improvements in diabetes management, controlled hypertension and increases in tuberculosis vaccinations were assisted through the use of these open source systems. The flexibility and adaptability of open source EHR demonstrated its utility and viability in the provision of necessary and needed chronic disease care among populations served by CHC.

  12. Analysis of Magnetically-Coupled Impedance Source Three-Phase Four-Switch Inverters

    DEFF Research Database (Denmark)

    Li, Kerui; Abdelhakim, Ahmed; Yang, Yongheng

    2017-01-01

    In this paper, magnetically-coupled impedance source (MCIS) three-phase four-switch inverters are introduced for renewable energy applications. This inverter utilizes two single-phase MCIS inverters to obtain a three-phase output, where less component-count is achieved in order to reduce the inve......In this paper, magnetically-coupled impedance source (MCIS) three-phase four-switch inverters are introduced for renewable energy applications. This inverter utilizes two single-phase MCIS inverters to obtain a three-phase output, where less component-count is achieved in order to reduce...... the inverter volume. On the other hand, as a result of the reduced number of switches, the proposed inverter suffers from higher voltage stresses. The MCIS inverters are first reviewed. Then, the modulation and operation principle of the MCIS three-phase inverter topology are introduced before sizing...

  13. RS-20 type repetitive generator with planar configuration of plasma opening switch

    Energy Technology Data Exchange (ETDEWEB)

    Agalakov, V P; Barinov, N U; Belenki, G S [Kurchatov Inst., Moscow (Russian Federation); and others

    1997-12-31

    The existing experience with the production of repetitive rate accelerators with a high peak power (in excess of 10{sup 10} W) and an average power above 50 kW makes it possible to resolve a number of physics and technology tasks which are connected with the reliability and life of the accelerator. The design and results on optimization of a simple plasma opening switch (POS) are discussed. The final design of the POS provided voltages of up to 2 MV and had a life of more than 105 pulses including 4 hours of continuous operation under 4 Hz repetition rate and wall plug power 65 kW. This unit was tested at the RS-20 type accelerator both at the Kurchatov Institute and at the Northwest Institute of Nuclear Technology in China. (author). 5 figs., 1 ref.

  14. Magnetic field propagation in a two ion species planar plasma opening switch

    International Nuclear Information System (INIS)

    Strauss, H. R.; Doron, R.; Arad, R.; Rubinstein, B.; Maron, Y.; Fruchtman, A.

    2007-01-01

    Three fluid plasma evolution equations are applied to the problem of magnetic field propagation in a planar plasma opening switch. For certain initial conditions in which Hall parameter H∼1, magnetic field penetration due to the Hall field, initially, as expected, either opposes or adds to the hydromagnetic pushing, depending on the polarity of the magnetic field relative to the density gradient. Later, however, the plasma pushing by the magnetic field is found in the case studied here to modify the plasma density in a way that the density gradient tends to align with the magnetic field gradient, effectively turning off the Hall effect. The penetration of the magnetic field then ceases and plasma pushing becomes the dominant process

  15. Open Source Software: critical review of scientific literature and other sources

    OpenAIRE

    Querol del Amo, Marc

    2007-01-01

    This thesis presents the results of a survey of Open Source Licensing literature. It aims to assist the reader in choosing the best license for his/her business. For this reason, the content of this thesis can be divided into: (i) an open source licensing overview, (ii) the explication of the main features of the most popular open source licenses, (iii) the consequences of using one or another and (iv) the critical or controversial issues related to Open Source Licensing. Furthermore, at the ...

  16. Open source data assimilation framework for hydrological modeling

    Science.gov (United States)

    Ridler, Marc; Hummel, Stef; van Velzen, Nils; Katrine Falk, Anne; Madsen, Henrik

    2013-04-01

    An open-source data assimilation framework is proposed for hydrological modeling. Data assimilation (DA) in hydrodynamic and hydrological forecasting systems has great potential to improve predictions and improve model result. The basic principle is to incorporate measurement information into a model with the aim to improve model results by error minimization. Great strides have been made to assimilate traditional in-situ measurements such as discharge, soil moisture, hydraulic head and snowpack into hydrologic models. More recently, remotely sensed data retrievals of soil moisture, snow water equivalent or snow cover area, surface water elevation, terrestrial water storage and land surface temperature have been successfully assimilated in hydrological models. The assimilation algorithms have become increasingly sophisticated to manage measurement and model bias, non-linear systems, data sparsity (time & space) and undetermined system uncertainty. It is therefore useful to use a pre-existing DA toolbox such as OpenDA. OpenDA is an open interface standard for (and free implementation of) a set of tools to quickly implement DA and calibration for arbitrary numerical models. The basic design philosophy of OpenDA is to breakdown DA into a set of building blocks programmed in object oriented languages. To implement DA, a model must interact with OpenDA to create model instances, propagate the model, get/set variables (or parameters) and free the model once DA is completed. An open-source interface for hydrological models exists capable of all these tasks: OpenMI. OpenMI is an open source standard interface already adopted by key hydrological model providers. It defines a universal approach to interact with hydrological models during simulation to exchange data during runtime, thus facilitating the interactions between models and data sources. The interface is flexible enough so that models can interact even if the model is coded in a different language, represent

  17. Your Personal Analysis Toolkit - An Open Source Solution

    Science.gov (United States)

    Mitchell, T.

    2009-12-01

    Open source software is commonly known for its web browsers, word processors and programming languages. However, there is a vast array of open source software focused on geographic information management and geospatial application building in general. As geo-professionals, having easy access to tools for our jobs is crucial. Open source software provides the opportunity to add a tool to your tool belt and carry it with you for your entire career - with no license fees, a supportive community and the opportunity to test, adopt and upgrade at your own pace. OSGeo is a US registered non-profit representing more than a dozen mature geospatial data management applications and programming resources. Tools cover areas such as desktop GIS, web-based mapping frameworks, metadata cataloging, spatial database analysis, image processing and more. Learn about some of these tools as they apply to AGU members, as well as how you can join OSGeo and its members in getting the job done with powerful open source tools. If you haven't heard of OSSIM, MapServer, OpenLayers, PostGIS, GRASS GIS or the many other projects under our umbrella - then you need to hear this talk. Invest in yourself - use open source!

  18. Industrial open source solutions for product life cycle management

    Directory of Open Access Journals (Sweden)

    Jaime Campos

    2014-12-01

    Full Text Available The authors go through the open source for product life cycle management (PLM and the efforts done from communities such as the open source initiative. The characteristics of the open source solutions are highlighted as well. Next, the authors go through the requirements for PLM. This is an area where more attention has been given as the manufacturers are competing with the quality and life cycle costs of their products. Especially, the need of companies to try to get a strong position in providing services for their products and thus to make themselves less vulnerable to changes in the market has led to high interest in product life cycle simulation. The potential of applying semantic data management to solve these problems discussed in the light of recent developments. In addition, a basic roadmap is presented as to how the above-described problems could be tackled with open software solutions.

  19. A FRAMEWORK FOR AN OPEN SOURCE GEOSPATIAL CERTIFICATION MODEL

    Directory of Open Access Journals (Sweden)

    T. U. R. Khan

    2016-06-01

    Full Text Available The geospatial industry is forecasted to have an enormous growth in the forthcoming years and an extended need for well-educated workforce. Hence ongoing education and training play an important role in the professional life. Parallel, in the geospatial and IT arena as well in the political discussion and legislation Open Source solutions, open data proliferation, and the use of open standards have an increasing significance. Based on the Memorandum of Understanding between International Cartographic Association, OSGeo Foundation, and ISPRS this development led to the implementation of the ICA-OSGeo-Lab imitative with its mission “Making geospatial education and opportunities accessible to all”. Discussions in this initiative and the growth and maturity of geospatial Open Source software initiated the idea to develop a framework for a worldwide applicable Open Source certification approach. Generic and geospatial certification approaches are already offered by numerous organisations, i.e., GIS Certification Institute, GeoAcademy, ASPRS, and software vendors, i. e., Esri, Oracle, and RedHat. They focus different fields of expertise and have different levels and ways of examination which are offered for a wide range of fees. The development of the certification framework presented here is based on the analysis of diverse bodies of knowledge concepts, i.e., NCGIA Core Curriculum, URISA Body Of Knowledge, USGIF Essential Body Of Knowledge, the “Geographic Information: Need to Know", currently under development, and the Geospatial Technology Competency Model (GTCM. The latter provides a US American oriented list of the knowledge, skills, and abilities required of workers in the geospatial technology industry and influenced essentially the framework of certification. In addition to the theoretical analysis of existing resources the geospatial community was integrated twofold. An online survey about the relevance of Open Source was performed and

  20. a Framework for AN Open Source Geospatial Certification Model

    Science.gov (United States)

    Khan, T. U. R.; Davis, P.; Behr, F.-J.

    2016-06-01

    The geospatial industry is forecasted to have an enormous growth in the forthcoming years and an extended need for well-educated workforce. Hence ongoing education and training play an important role in the professional life. Parallel, in the geospatial and IT arena as well in the political discussion and legislation Open Source solutions, open data proliferation, and the use of open standards have an increasing significance. Based on the Memorandum of Understanding between International Cartographic Association, OSGeo Foundation, and ISPRS this development led to the implementation of the ICA-OSGeo-Lab imitative with its mission "Making geospatial education and opportunities accessible to all". Discussions in this initiative and the growth and maturity of geospatial Open Source software initiated the idea to develop a framework for a worldwide applicable Open Source certification approach. Generic and geospatial certification approaches are already offered by numerous organisations, i.e., GIS Certification Institute, GeoAcademy, ASPRS, and software vendors, i. e., Esri, Oracle, and RedHat. They focus different fields of expertise and have different levels and ways of examination which are offered for a wide range of fees. The development of the certification framework presented here is based on the analysis of diverse bodies of knowledge concepts, i.e., NCGIA Core Curriculum, URISA Body Of Knowledge, USGIF Essential Body Of Knowledge, the "Geographic Information: Need to Know", currently under development, and the Geospatial Technology Competency Model (GTCM). The latter provides a US American oriented list of the knowledge, skills, and abilities required of workers in the geospatial technology industry and influenced essentially the framework of certification. In addition to the theoretical analysis of existing resources the geospatial community was integrated twofold. An online survey about the relevance of Open Source was performed and evaluated with 105

  1. An Organizational Perspective on Free and Open Source Software Development

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2006-01-01

    The traditional model of innovation, the restricted/close source (R/CS) model, is based on proprietary knowledge and private model of production. A fundamental different one, the open source model is based on non-proprietary knowledge and non-economic motives. Moreover, between the two......, there are various combinations or hybrids, in the following referred to as free/open source-based (F/OS-based) agency. In the discussions, practical examples from software production are included. In conclusion, the paper identifies avenues for future research as well as important managerial and policy implications....

  2. iPhone Open Application Development Write Native Applications Using the Open Source Tool Chain

    CERN Document Server

    Zdziarski, Jonathan

    2008-01-01

    Developers everywhere are eager to create applications for the iPhone, and many of them prefer the open source, community-developed tool chain to Apple's own toolkit. This new edition of iPhone Open Application Development covers the latest version of the open toolkit -- now updated for Apple's iPhone 2.x software and iPhone 3G -- and explains in clear language how to create applications using Objective-C and the iPhone API.

  3. OpenBEM - An open source Boundary Element Method software in Acoustics

    DEFF Research Database (Denmark)

    Cutanda Henriquez, Vicente; Juhl, Peter Møller

    2010-01-01

    OpenBEM is a collection of open source programs for solving the Helmholtz Equation using the Boundary Element Method. The collection is written in Matlab by the authors and contains codes for dealing with exterior and interior problems in two or three dimensions as well as implementation of axi...... with examples of its use. Previous research results where OpenBEM was employed will be mentioned....

  4. Open source identity management patterns and practices using OpenAM 10.x

    CERN Document Server

    Kenning, Waylon

    2013-01-01

    This is a Packt Mini in a tutorial format that provides multiple examples on Identity Management using OpenAM 10.x.Open Source Identity Management Patterns and Practices Using OpenAM 10.x is great for developers and architects who are new to Identity Management, and who want a brief overview of what's possible and how to quickly implement a prototype. It's assumed that you've had experience with web applications and some knowledge of Apache and Tomcat.

  5. A Framework for the Systematic Collection of Open Source Intelligence

    Energy Technology Data Exchange (ETDEWEB)

    Pouchard, Line Catherine [ORNL; Trien, Joseph P [ORNL; Dobson, Jonathan D [ORNL

    2009-01-01

    Following legislative directions, the Intelligence Community has been mandated to make greater use of Open Source Intelligence (OSINT). Efforts are underway to increase the use of OSINT but there are many obstacles. One of these obstacles is the lack of tools helping to manage the volume of available data and ascertain its credibility. We propose a unique system for selecting, collecting and storing Open Source data from the Web and the Open Source Center. Some data management tasks are automated, document source is retained, and metadata containing geographical coordinates are added to the documents. Analysts are thus empowered to search, view, store, and analyze Web data within a single tool. We present ORCAT I and ORCAT II, two implementations of the system.

  6. Parallel and series 4 switch Z-source converters in induction motor drives

    DEFF Research Database (Denmark)

    Baba, Mircea; Lascu, Cristian; Boldea, Ion

    2014-01-01

    This paper presents a control strategy for four switch three-phase Z-source Inverter with parallel and series Z-source network fed 0.5 kW induction motor drive with V/f control and the algorithm to control the dc boost, split capacitor voltage balance and the ac output voltage. The proposed control...... algorithm is validated through simulation and experiment....

  7. BlueSky ATC Simulator Project : An Open Data and Open Source Approach

    NARCIS (Netherlands)

    Hoekstra, J.M.; Ellerbroek, J.

    2016-01-01

    To advance ATM research as a science, ATM research results should be made more comparable. A possible way to do this is to share tools and data. This paper presents a project that investigates the feasibility of a fully open-source and open-data approach to air traffic simulation. Here, the first of

  8. Secrecy versus openness : Internet security and the limits of open source and peer production

    NARCIS (Netherlands)

    Schmidt, A.

    2014-01-01

    Open source and peer production have been praised as organisational models that could change the world for the better. It is commonly asserted that almost any societal activity could benefit from distributed, bottom-up collaboration — by making societal interaction more open, more social, and more

  9. A Business Case Study of Open Source Software

    Science.gov (United States)

    2001-07-01

    include cost or price, availability or multiple distribution sources, and popularity or brand /reputation. While both the commercial and government...availability, quality, security, management, scalability, brand /reputation, and service and support. 1 2 3 4 5 Pr ice Re lia bil ity Pe rfo rm an ce Av ail...source community. Open source, and Linux in particular, is often regarded as the heroic underdog . Linux has been touted as a “Windows killer.”44 Over

  10. Microwave plasma source having improved switching operation from plasma ignition phase to normal ion extraction phase

    International Nuclear Information System (INIS)

    Sakudo, N.; Abe, K.; Koike, H.; Okada, O.; Tokiguchi, K.

    1985-01-01

    In a microwave plasma source, a discharge space supplied with a microwave electric field is supplied with a DC magnetic field. A material to be ionized is introduced into the discharge space to produce plasma, whereby ions are extracted through an ion extracting system. A switch is provided for effecting through switching operation the change-over of the magnetic field applied to the discharge space from the intensity for the ignition of plasma to the intensity for ion extraction in succession to completion of the plasma ignition

  11. Advances in the use of open-source information

    International Nuclear Information System (INIS)

    Horak, K.; Bleakly, D.; McDaniel, M.

    2013-01-01

    Great advances have been made in the application of open-source information for Safeguards. However, the open-source 'ecosystem' is rapidly evolving. Recently, the combination of powerful smart-phones and the World Wide Web have led to novel developments for mapping the impact of natural and man-made disasters. Researchers are learning to harness online volunteers as citizen scientists. Online social media such as Facebook, LinkedIn, and Twitter are becoming accepted channels of credible information. Geo-spatially-aware applications (augmented reality applications) are capable of overlaying data upon a smart-phone's view screen. The authors review available open-source tools and technologies. These and other developments will have a significant effect on the collection, evaluation, structuring, analysis, and dissemination of safeguards-relevant information. In addition, the modern, open Internet is posing new security threats.not just viruses and their ilk, but threats based on digital traces left by browsing the open Web. The authors present a case study of the disastrous toxic flood near Devecser, Hungary in October 2010 for which we get 621,000 results for everything related to search terms, 68,000 blog posts on the topic, 43,300 images available and then give recommendations for the future use of open-source information and software tools. (authors)

  12. Advances in the use of open-source information

    Energy Technology Data Exchange (ETDEWEB)

    Horak, K.; Bleakly, D.; McDaniel, M. [Sandia National Laboratories, Albuquerque, NM (United States)

    2013-07-01

    Great advances have been made in the application of open-source information for Safeguards. However, the open-source 'ecosystem' is rapidly evolving. Recently, the combination of powerful smart-phones and the World Wide Web have led to novel developments for mapping the impact of natural and man-made disasters. Researchers are learning to harness online volunteers as citizen scientists. Online social media such as Facebook, LinkedIn, and Twitter are becoming accepted channels of credible information. Geo-spatially-aware applications (augmented reality applications) are capable of overlaying data upon a smart-phone's view screen. The authors review available open-source tools and technologies. These and other developments will have a significant effect on the collection, evaluation, structuring, analysis, and dissemination of safeguards-relevant information. In addition, the modern, open Internet is posing new security threats.not just viruses and their ilk, but threats based on digital traces left by browsing the open Web. The authors present a case study of the disastrous toxic flood near Devecser, Hungary in October 2010 for which we get 621,000 results for everything related to search terms, 68,000 blog posts on the topic, 43,300 images available and then give recommendations for the future use of open-source information and software tools. (authors)

  13. Open source drug discovery in practice: a case study.

    Science.gov (United States)

    Årdal, Christine; Røttingen, John-Arne

    2012-01-01

    Open source drug discovery offers potential for developing new and inexpensive drugs to combat diseases that disproportionally affect the poor. The concept borrows two principle aspects from open source computing (i.e., collaboration and open access) and applies them to pharmaceutical innovation. By opening a project to external contributors, its research capacity may increase significantly. To date there are only a handful of open source R&D projects focusing on neglected diseases. We wanted to learn from these first movers, their successes and failures, in order to generate a better understanding of how a much-discussed theoretical concept works in practice and may be implemented. A descriptive case study was performed, evaluating two specific R&D projects focused on neglected diseases. CSIR Team India Consortium's Open Source Drug Discovery project (CSIR OSDD) and The Synaptic Leap's Schistosomiasis project (TSLS). Data were gathered from four sources: interviews of participating members (n = 14), a survey of potential members (n = 61), an analysis of the websites and a literature review. Both cases have made significant achievements; however, they have done so in very different ways. CSIR OSDD encourages international collaboration, but its process facilitates contributions from mostly Indian researchers and students. Its processes are formal with each task being reviewed by a mentor (almost always offline) before a result is made public. TSLS, on the other hand, has attracted contributors internationally, albeit significantly fewer than CSIR OSDD. Both have obtained funding used to pay for access to facilities, physical resources and, at times, labor costs. TSLS releases its results into the public domain, whereas CSIR OSDD asserts ownership over its results. Technically TSLS is an open source project, whereas CSIR OSDD is a crowdsourced project. However, both have enabled high quality research at low cost. The critical success factors appear to be clearly

  14. Open Source Drug Discovery in Practice: A Case Study

    Science.gov (United States)

    Årdal, Christine; Røttingen, John-Arne

    2012-01-01

    Background Open source drug discovery offers potential for developing new and inexpensive drugs to combat diseases that disproportionally affect the poor. The concept borrows two principle aspects from open source computing (i.e., collaboration and open access) and applies them to pharmaceutical innovation. By opening a project to external contributors, its research capacity may increase significantly. To date there are only a handful of open source R&D projects focusing on neglected diseases. We wanted to learn from these first movers, their successes and failures, in order to generate a better understanding of how a much-discussed theoretical concept works in practice and may be implemented. Methodology/Principal Findings A descriptive case study was performed, evaluating two specific R&D projects focused on neglected diseases. CSIR Team India Consortium's Open Source Drug Discovery project (CSIR OSDD) and The Synaptic Leap's Schistosomiasis project (TSLS). Data were gathered from four sources: interviews of participating members (n = 14), a survey of potential members (n = 61), an analysis of the websites and a literature review. Both cases have made significant achievements; however, they have done so in very different ways. CSIR OSDD encourages international collaboration, but its process facilitates contributions from mostly Indian researchers and students. Its processes are formal with each task being reviewed by a mentor (almost always offline) before a result is made public. TSLS, on the other hand, has attracted contributors internationally, albeit significantly fewer than CSIR OSDD. Both have obtained funding used to pay for access to facilities, physical resources and, at times, labor costs. TSLS releases its results into the public domain, whereas CSIR OSDD asserts ownership over its results. Conclusions/Significance Technically TSLS is an open source project, whereas CSIR OSDD is a crowdsourced project. However, both have enabled high quality

  15. Open-Source RTOS Space Qualification: An RTEMS Case Study

    Science.gov (United States)

    Zemerick, Scott

    2017-01-01

    NASA space-qualification of reusable off-the-shelf real-time operating systems (RTOSs) remains elusive due to several factors notably (1) The diverse nature of RTOSs utilized across NASA, (2) No single NASA space-qualification criteria, lack of verification and validation (V&V) analysis, or test beds, and (3) different RTOS heritages, specifically open-source RTOSs and closed vendor-provided RTOSs. As a leader in simulation test beds, the NASA IV&V Program is poised to help jump-start and lead the space-qualification effort of the open source Real-Time Executive for Multiprocessor Systems (RTEMS) RTOS. RTEMS, as a case-study, can be utilized as an example of how to qualify all RTOSs, particularly the reusable non-commercial (open-source) ones that are gaining usage and popularity across NASA. Qualification will improve the overall safety and mission assurance of RTOSs for NASA-agency wide usage. NASA's involvement in space-qualification of an open-source RTOS such as RTEMS will drive the RTOS industry toward a more qualified and mature open-source RTOS product.

  16. Technology collaboration by means of an open source government

    Science.gov (United States)

    Berardi, Steven M.

    2009-05-01

    The idea of open source software originally began in the early 1980s, but it never gained widespread support until recently, largely due to the explosive growth of the Internet. Only the Internet has made this kind of concept possible, bringing together millions of software developers from around the world to pool their knowledge. The tremendous success of open source software has prompted many corporations to adopt the culture of open source and thus share information they previously held secret. The government, and specifically the Department of Defense (DoD), could also benefit from adopting an open source culture. In acquiring satellite systems, the DoD often builds walls between program offices, but installing doors between programs can promote collaboration and information sharing. This paper addresses the challenges and consequences of adopting an open source culture to facilitate technology collaboration for DoD space acquisitions. DISCLAIMER: The views presented here are the views of the author, and do not represent the views of the United States Government, United States Air Force, or the Missile Defense Agency.

  17. An International Look at Women in Open Source

    Directory of Open Access Journals (Sweden)

    Cathy Malmrose

    2009-05-01

    Full Text Available When attending conferences, working with various open source teams, and generally interacting with people in the open source world, we see women as a small representative minority. The disparity leaves us wondering: "How to activate the other 50% of the population?". The question, "How do we include more women?" has been asked many times and answered in many ways. Cathy Malmrose, CEO of ZaReason, a Linux hardware company, stated, "possibly the most immediately effective solution is to showcase women internationally and their contributions. By simply talking about what women are doing all over the world, it creates an atmosphere of acceptance, encouraging more women to try contributing, no matter where they are located or what their situation is. Our goal is to normalize the experience of having women on open source projects". This issue of OSBR is a powerful effort to do just that. This article provides a glance at women in open source internationally. It is by no means comprehensive and is based solely on a random sampling of women who are currently contributing. The goal of this article is to give you a sense of the breadth and depth of women contributing to open source.

  18. Comparison of open-source linear programming solvers.

    Energy Technology Data Exchange (ETDEWEB)

    Gearhart, Jared Lee; Adair, Kristin Lynn; Durfee, Justin David.; Jones, Katherine A.; Martin, Nathaniel; Detry, Richard Joseph

    2013-10-01

    When developing linear programming models, issues such as budget limitations, customer requirements, or licensing may preclude the use of commercial linear programming solvers. In such cases, one option is to use an open-source linear programming solver. A survey of linear programming tools was conducted to identify potential open-source solvers. From this survey, four open-source solvers were tested using a collection of linear programming test problems and the results were compared to IBM ILOG CPLEX Optimizer (CPLEX) [1], an industry standard. The solvers considered were: COIN-OR Linear Programming (CLP) [2], [3], GNU Linear Programming Kit (GLPK) [4], lp_solve [5] and Modular In-core Nonlinear Optimization System (MINOS) [6]. As no open-source solver outperforms CPLEX, this study demonstrates the power of commercial linear programming software. CLP was found to be the top performing open-source solver considered in terms of capability and speed. GLPK also performed well but cannot match the speed of CLP or CPLEX. lp_solve and MINOS were considerably slower and encountered issues when solving several test problems.

  19. Open Source Web Based Geospatial Processing with OMAR

    Directory of Open Access Journals (Sweden)

    Mark Lucas

    2009-01-01

    Full Text Available The availability of geospatial data sets is exploding. New satellites, aerial platforms, video feeds, global positioning system tagged digital photos, and traditional GIS information are dramatically increasing across the globe. These raw materials need to be dynamically processed, combined and correlated to generate value added information products to answer a wide range of questions. This article provides an overview of OMAR web based geospatial processing. OMAR is part of the Open Source Software Image Map project under the Open Source Geospatial Foundation. The primary contributors of OSSIM make their livings by providing professional services to US Government agencies and programs. OMAR provides one example that open source software solutions are increasingly being deployed in US government agencies. We will also summarize the capabilities of OMAR and its plans for near term development.

  20. Open Source AV solution supporting In Situ Simulation

    DEFF Research Database (Denmark)

    Krogh, Kristian; Pociunas, Gintas; Dahl, Mads Ronald

    the software to meet our expectations for a portable AV system for VAD. The system would make use of “off the shelf” hardware components which are widely available and easily replaced or expanded. The developed AV software and coding is contracted to be available as Copyleft Open Source to ensure low cost...... a stable AV software that has be developed and implemented for an in situ simulation initiative. This version (1.3) is the first on released as Open Source (Copyleft) software (see QR tag). We have found that it is possible to deliver multi-camera video assisted debriefing in a mobile, in situ simulation...... environment using an AV system constructed from “off the shelf” components and Open Source software....

  1. Bioclipse: an open source workbench for chemo- and bioinformatics

    Directory of Open Access Journals (Sweden)

    Wagener Johannes

    2007-02-01

    Full Text Available Abstract Background There is a need for software applications that provide users with a complete and extensible toolkit for chemo- and bioinformatics accessible from a single workbench. Commercial packages are expensive and closed source, hence they do not allow end users to modify algorithms and add custom functionality. Existing open source projects are more focused on providing a framework for integrating existing, separately installed bioinformatics packages, rather than providing user-friendly interfaces. No open source chemoinformatics workbench has previously been published, and no sucessful attempts have been made to integrate chemo- and bioinformatics into a single framework. Results Bioclipse is an advanced workbench for resources in chemo- and bioinformatics, such as molecules, proteins, sequences, spectra, and scripts. It provides 2D-editing, 3D-visualization, file format conversion, calculation of chemical properties, and much more; all fully integrated into a user-friendly desktop application. Editing supports standard functions such as cut and paste, drag and drop, and undo/redo. Bioclipse is written in Java and based on the Eclipse Rich Client Platform with a state-of-the-art plugin architecture. This gives Bioclipse an advantage over other systems as it can easily be extended with functionality in any desired direction. Conclusion Bioclipse is a powerful workbench for bio- and chemoinformatics as well as an advanced integration platform. The rich functionality, intuitive user interface, and powerful plugin architecture make Bioclipse the most advanced and user-friendly open source workbench for chemo- and bioinformatics. Bioclipse is released under Eclipse Public License (EPL, an open source license which sets no constraints on external plugin licensing; it is totally open for both open source plugins as well as commercial ones. Bioclipse is freely available at http://www.bioclipse.net.

  2. Open Source Hbim for Cultural Heritage: a Project Proposal

    Science.gov (United States)

    Diara, F.; Rinaudo, F.

    2018-05-01

    Actual technologies are changing Cultural Heritage research, analysis, conservation and development ways, allowing new innovative approaches. The possibility of integrating Cultural Heritage data, like archaeological information, inside a three-dimensional environment system (like a Building Information Modelling) involve huge benefits for its management, monitoring and valorisation. Nowadays there are many commercial BIM solutions. However, these tools are thought and developed mostly for architecture design or technical installations. An example of better solution could be a dynamic and open platform that might consider Cultural Heritage needs as priority. Suitable solution for better and complete data usability and accessibility could be guaranteed by open source protocols. This choice would allow adapting software to Cultural Heritage needs and not the opposite, thus avoiding methodological stretches. This work will focus exactly on analysis and experimentations about specific characteristics of these kind of open source software (DBMS, CAD, Servers) applied to a Cultural Heritage example, in order to verifying their flexibility, reliability and then creating a dynamic HBIM open source prototype. Indeed, it might be a starting point for a future creation of a complete HBIM open source solution that we could adapt to others Cultural Heritage researches and analysis.

  3. Open source tools for ATR development and performance evaluation

    Science.gov (United States)

    Baumann, James M.; Dilsavor, Ronald L.; Stubbles, James; Mossing, John C.

    2002-07-01

    Early in almost every engineering project, a decision must be made about tools; should I buy off-the-shelf tools or should I develop my own. Either choice can involve significant cost and risk. Off-the-shelf tools may be readily available, but they can be expensive to purchase and to maintain licenses, and may not be flexible enough to satisfy all project requirements. On the other hand, developing new tools permits great flexibility, but it can be time- (and budget-) consuming, and the end product still may not work as intended. Open source software has the advantages of both approaches without many of the pitfalls. This paper examines the concept of open source software, including its history, unique culture, and informal yet closely followed conventions. These characteristics influence the quality and quantity of software available, and ultimately its suitability for serious ATR development work. We give an example where Python, an open source scripting language, and OpenEV, a viewing and analysis tool for geospatial data, have been incorporated into ATR performance evaluation projects. While this case highlights the successful use of open source tools, we also offer important insight into risks associated with this approach.

  4. An Open-Source Toolbox for PEM Fuel Cell Simulation

    Directory of Open Access Journals (Sweden)

    Jean-Paul Kone

    2018-05-01

    Full Text Available In this paper, an open-source toolbox that can be used to accurately predict the distribution of the major physical quantities that are transported within a proton exchange membrane (PEM fuel cell is presented. The toolbox has been developed using the Open Source Field Operation and Manipulation (OpenFOAM platform, which is an open-source computational fluid dynamics (CFD code. The base case results for the distribution of velocity, pressure, chemical species, Nernst potential, current density, and temperature are as expected. The plotted polarization curve was compared to the results from a numerical model and experimental data taken from the literature. The conducted simulations have generated a significant amount of data and information about the transport processes that are involved in the operation of a PEM fuel cell. The key role played by the concentration constant in shaping the cell polarization curve has been explored. The development of the present toolbox is in line with the objectives outlined in the International Energy Agency (IEA, Paris, France Advanced Fuel Cell Annex 37 that is devoted to developing open-source computational tools to facilitate fuel cell technologies. The work therefore serves as a basis for devising additional features that are not always feasible with a commercial code.

  5. Freeing Crop Genetics through the Open Source Seed Initiative.

    Directory of Open Access Journals (Sweden)

    Claire H Luby

    2016-04-01

    Full Text Available For millennia, seeds have been freely available to use for farming and plant breeding without restriction. Within the past century, however, intellectual property rights (IPRs have threatened this tradition. In response, a movement has emerged to counter the trend toward increasing consolidation of control and ownership of plant germplasm. One effort, the Open Source Seed Initiative (OSSI, www.osseeds.org, aims to ensure access to crop genetic resources by embracing an open source mechanism that fosters exchange and innovation among farmers, plant breeders, and seed companies. Plant breeders across many sectors have taken the OSSI Pledge to create a protected commons of plant germplasm for future generations.

  6. Freeing Crop Genetics through the Open Source Seed Initiative.

    Science.gov (United States)

    Luby, Claire H; Goldman, Irwin L

    2016-04-01

    For millennia, seeds have been freely available to use for farming and plant breeding without restriction. Within the past century, however, intellectual property rights (IPRs) have threatened this tradition. In response, a movement has emerged to counter the trend toward increasing consolidation of control and ownership of plant germplasm. One effort, the Open Source Seed Initiative (OSSI, www.osseeds.org), aims to ensure access to crop genetic resources by embracing an open source mechanism that fosters exchange and innovation among farmers, plant breeders, and seed companies. Plant breeders across many sectors have taken the OSSI Pledge to create a protected commons of plant germplasm for future generations.

  7. Data from thermal testing of the Open Source Cryostage

    DEFF Research Database (Denmark)

    Buch, Johannes Lørup; Ramløv, Hans

    2016-01-01

    The data presented here is related to the research article "An open source cryostage and software analysis method for detection of antifreeze activity" (Buch and Ramløv, 2016) [1]. The design of the Open Source Cryostage (OSC) is tested in terms of thermal limits, thermal efficiency and electrical...... efficiency. This article furthermore includes an overview of the electrical circuitry and a flowchart of the software program controlling the temperature of the OSC. The thermal efficiency data is presented here as degrees per volt and maximum cooling capacity....

  8. Open Source Next Generation Visualization Software for Interplanetary Missions

    Science.gov (United States)

    Trimble, Jay; Rinker, George

    2016-01-01

    Mission control is evolving quickly, driven by the requirements of new missions, and enabled by modern computing capabilities. Distributed operations, access to data anywhere, data visualization for spacecraft analysis that spans multiple data sources, flexible reconfiguration to support multiple missions, and operator use cases, are driving the need for new capabilities. NASA's Advanced Multi-Mission Operations System (AMMOS), Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) are collaborating to build a new generation of mission operations software for visualization, to enable mission control anywhere, on the desktop, tablet and phone. The software is built on an open source platform that is open for contributions (http://nasa.github.io/openmct).

  9. POKEHEAD: An Open Source Interactive Headphone Based HCI Platform

    DEFF Research Database (Denmark)

    Højlund, Marie; Trento, Stefano; Goudarzi, Visda

    2012-01-01

    This paper introduces a novel interactive, human-computer interface and remote social communication system based on an augmented, hi-fidelity audio headphone platform. Specifically, this system- named Pokehead, currently utilizes the DUL embedded open-source accelerometer platform to gather 3-axis......, open source implementation. Our rapid prototype proved to be robust enough to work in performance for demonstration purposes and serves as a working proof of concept. In this paper we provide a technical description of our prototype, illustrate the context and motivation behind the project, and offer...

  10. The Challenges of Open Source Software in IT Adoption

    DEFF Research Database (Denmark)

    Holm Larsen, Michael; Holck, Jesper; Pedersen, Mogens Kuhn

    2004-01-01

    Abstract: The paper presents an explorative study of Open Source Software (OSS) focusing on the managerial decisions for acquisition of OSS. Based on three case studies we argue that whereas small organizations often may chose adoption of OSS expecting significant cost savings, a major barrier...... for larger organizations' adoption of OSS lies in the organizations' consolidation of the enterprise architectures, in addition to that OSS will not be adopted before satisfactory delivery and procurement models for OSS are established. Keywords: Open Source Software, OSS, Enterprise Architecture, Total Cost...

  11. Open source and DIY hardware for DNA nanotechnology labs.

    Science.gov (United States)

    Damase, Tulsi R; Stephens, Daniel; Spencer, Adam; Allen, Peter B

    A set of instruments and specialized equipment is necessary to equip a laboratory to work with DNA. Reducing the barrier to entry for DNA manipulation should enable and encourage new labs to enter the field. We present three examples of open source/DIY technology with significantly reduced costs relative to commercial equipment. This includes a gel scanner, a horizontal PAGE gel mold, and a homogenizer for generating DNA-coated particles. The overall cost savings obtained by using open source/DIY equipment was between 50 and 90%.

  12. Human genome and open source: balancing ethics and business.

    Science.gov (United States)

    Marturano, Antonio

    2011-01-01

    The Human Genome Project has been completed thanks to a massive use of computer techniques, as well as the adoption of the open-source business and research model by the scientists involved. This model won over the proprietary model and allowed a quick propagation and feedback of research results among peers. In this paper, the author will analyse some ethical and legal issues emerging by the use of such computer model in the Human Genome property rights. The author will argue that the Open Source is the best business model, as it is able to balance business and human rights perspectives.

  13. Pentaho Business Analytics: a Business Intelligence Open Source Alternative

    Directory of Open Access Journals (Sweden)

    Diana TÂRNĂVEANU

    2012-10-01

    Full Text Available Most organizations strive to obtain fast, interactive and insightful analytics in order to fundament the most effective and profitable decisions. They need to incorporate huge amounts of data in order to run analysis based on queries and reports with collaborative capabilities. The large variety of Business Intelligence solutions on the market makes it very difficult for organizations to select one and evaluate the impact of the selected solution to the organization. The need of a strategy to help organization chose the best solution for investment emerges. In the past, Business Intelligence (BI market was dominated by closed source and commercial tools, but in the last years open source solutions developed everywhere. An Open Source Business Intelligence solution can be an option due to time-sensitive, sprawling requirements and tightening budgets. This paper presents a practical solution implemented in a suite of Open Source Business Intelligence products called Pentaho Business Analytics, which provides data integration, OLAP services, reporting, dashboarding, data mining and ETL capabilities. The study conducted in this paper suggests that the open source phenomenon could become a valid alternative to commercial platforms within the BI context.

  14. OpenMC In Situ Source Convergence Detection

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Garrett Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Univ. of California, Davis, CA (United States); Dutta, Soumya [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); The Ohio State Univ., Columbus, OH (United States); Woodring, Jonathan Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-07

    We designed and implemented an in situ version of particle source convergence for the OpenMC particle transport simulator. OpenMC is a Monte Carlo based-particle simulator for neutron criticality calculations. For the transport simulation to be accurate, source particles must converge on a spatial distribution. Typically, convergence is obtained by iterating the simulation by a user-settable, fixed number of steps, and it is assumed that convergence is achieved. We instead implement a method to detect convergence, using the stochastic oscillator for identifying convergence of source particles based on their accumulated Shannon Entropy. Using our in situ convergence detection, we are able to detect and begin tallying results for the full simulation once the proper source distribution has been confirmed. Our method ensures that the simulation is not started too early, by a user setting too optimistic parameters, or too late, by setting too conservative a parameter.

  15. Survivability as a Tool for Evaluating Open Source Software

    Science.gov (United States)

    2015-06-01

    tremendously successful in certain applications such as the Mozilla Firefox web browser and the Apache web server [10]. Open source software is often...source versions (such as Internet Explorer compared to Mozilla Firefox ), which typically conclude that vulnerabilities are, in fact, much more...for radios M. Smith ACS ACS ROS autonomous functionality (none) ACS PX4 Firmware PX4 FMU driver BSD 3-clause ACS PX4 Nuttx real time OS BSD ACS

  16. Drive of Open Source Idea Generation for Innovation

    OpenAIRE

    Khan, Zahidul

    2013-01-01

    The aim of the thesis is to introduce the source of idea generation for innovation. The scope is limited to provide general knowledge about relevant issues of the co-creation of products which play significant role for innovation. In product innovation, it is necessary to consider external valuable work and talent. Firms increasingly use open source models to collect external ideas for innovation, for instance, by means of websites where customers, suppliers and other external parties can sub...

  17. Method and system for a gas tube switch-based voltage source high voltage direct current transmission system

    Science.gov (United States)

    She, Xu; Chokhawala, Rahul Shantilal; Zhou, Rui; Zhang, Di; Sommerer, Timothy John; Bray, James William

    2016-12-13

    A voltage source converter based high-voltage direct-current (HVDC) transmission system includes a voltage source converter (VSC)-based power converter channel. The VSC-based power converter channel includes an AC-DC converter and a DC-AC inverter electrically coupled to the AC-DC converter. The AC-DC converter and a DC-AC inverter include at least one gas tube switching device coupled in electrical anti-parallel with a respective gas tube diode. The VSC-based power converter channel includes a commutating circuit communicatively coupled to one or more of the at least one gas tube switching devices. The commutating circuit is configured to "switch on" a respective one of the one or more gas tube switching devices during a first portion of an operational cycle and "switch off" the respective one of the one or more gas tube switching devices during a second portion of the operational cycle.

  18. Gap formation processes in a high-density plasma opening switch

    International Nuclear Information System (INIS)

    Grossmann, J.M.; Swanekamp, S.B.; Ottinger, P.F.; Commisso, R.J.; Hinshelwood, D.D.; Weber, B.V.

    1995-01-01

    A gap opening process in plasma opening switches (POS) is examined with the aid of numerical simulations. In these simulations, a high density (n e =10 14 --5x10 15 cm -3 ) uniform plasma initially bridges a small section of the coaxial transmission line of an inductive energy storage generator. A short section of vacuum transmission line connects the POS to a short circuit load. The results presented here extend previous simulations in the n e =10 12 --10 13 cm -3 density regime. The simulations show that a two-dimensional (2-D) sheath forms in the plasma near a cathode. This sheath is positively charged, and electrostatic sheath potentials that are large compared to the anode--cathode voltage develop. Initially, the 2-D sheath is located at the generator edge of the plasma. As ions are accelerated out of the sheath, it retains its original 2-D structure, but migrates axially toward the load creating a magnetically insulated gap in its wake. When the sheath reaches the load edge of the POS, the POS stops conducting current and the load current increases rapidly. At the end of the conduction phase a gap exists in the POS whose size is determined by the radial dimensions of the 2-D sheath. Simulations at various plasma densities and current levels show that the radial size of the gap scales roughly as B/n e , where B is the magnetic field. The results of this work are discussed in the context of long-conduction-time POS physics, but exhibit the same physical gap formation mechanisms as earlier lower density simulations more relevant to short-conduction-time POS. copyright 1995 American Institute of Physics

  19. The Energy Balance of Plasma in a Coaxial Plasma Opening Switch

    International Nuclear Information System (INIS)

    Xu Xiang; Wang Younian

    2006-01-01

    The two-dimensional energy balance in a coaxial plasma opening switch (POS) is studied based on the single-fluid magnetohydrodynamic (MHD) equations coupled with the generalized Ohm's law. The energy transfers between the plasma and the magnetic field are considered during the penetration of the magnetic field as the Ohmic heating is included in the energy-balance equation. The focus is on the energy partition between the magnetic-field energy and the dissipated magnetic-field energy in a high-density POS with different rise-in-time electric currents at the generator boundary. The simulation code is tested in two cases: the constant-in-time current case and the linear rise-in-time current case. For the sinusoidally rise-in-time current similar to that of the experiments, it is shown that at the end of the conduction phase the dissipated magnetic-field energy is 36.5% of the input electromagnetic energy, which is consistent with the experimental results

  20. Two-dimensional electron flow in pulsed power transmission lines and plasma opening switches

    International Nuclear Information System (INIS)

    Church, B.W.; Longcope, D.W.; Ng, C.K.; Sudan, R.N.

    1991-01-01

    The operation of magnetically insulated transmission lines (MITL) and the interruption of current in a plasma opening switch (POS) are determined by the physics of the electrons emitted by the cathode surface. A mathematical model describes the self-consistent two-dimensional flow of an electron fluid. A finite element code, FERUS, has been developed to solve the two equations which describe Poisson's and Ampere's law in two dimensions. The solutions from this code are obtained for parameters where the electron orbits are considerably modified by the self-magnetic field of the current. Next, the self-insulated electron flow in a MITL with a step change in cross-section is studied using a conventional two-dimensional fully electromagnetic particle-in-cell code, MASK. The equations governing two-dimensional quasi-static electron flow are solved numerically by a third technique which is suitable for predicting current interruption in a POS. The object of the study is to determine the critical load impedance, Z CL , required for current interruption for a given applied voltage, cathode voltage and plasma length. (author). 9 refs, 5 figs

  1. Fluid simulation of the conduction phase of the plasma erosion opening switch

    International Nuclear Information System (INIS)

    Grossmann, J.M.; Mosher, D.; Ottinger, P.F.

    1987-01-01

    The conduction phase of the plasma erosion openings switch (PEOS) is studied using a 1 1/2-D electromagnetic two-fluid code. The focus of this work is on understanding how two effects, a current-limiting model of electron emission, and the magnetic insulation of electrons at the cathode, determine current conduction in the plasma. Simulations are performed in the parameter regimes of the Gamble I, POP, and PBFA II pulsed power generators, and previous low-density, short-rise time simulations of the PEOS. Fluid code results are compared to a 1-D analytic theory and to the Gamble I and POP experiments. Good agreement between theory and simulation, but mixed agreement between simulation and experiment is found. Experimental Β-field measurements on POP show weaker j x Β compression than the simulation. Current penetration and plasma current channels qualitatively similar to experimental observation are found in the Gamble I regime. However, magnetic insulation of electrons emitted from the cathode bunches the electron flow into narrower current channels than observed experimentally. In several cases, the presence of an electron-scattering or energy-loss mechanism near the cathode must be invoked to overcome magnetic insulation and widen the current channels

  2. Augmented switching linear dynamical system model for gas concentration estimation with MOX sensors in an open sampling system.

    Science.gov (United States)

    Di Lello, Enrico; Trincavelli, Marco; Bruyninckx, Herman; De Laet, Tinne

    2014-07-11

    In this paper, we introduce a Bayesian time series model approach for gas concentration estimation using Metal Oxide (MOX) sensors in Open Sampling System (OSS). Our approach focuses on the compensation of the slow response of MOX sensors, while concurrently solving the problem of estimating the gas concentration in OSS. The proposed Augmented Switching Linear System model allows to include all the sources of uncertainty arising at each step of the problem in a single coherent probabilistic formulation. In particular, the problem of detecting on-line the current sensor dynamical regime and estimating the underlying gas concentration under environmental disturbances and noisy measurements is formulated and solved as a statistical inference problem. Our model improves, with respect to the state of the art, where system modeling approaches have been already introduced, but only provided an indirect relative measures proportional to the gas concentration and the problem of modeling uncertainty was ignored. Our approach is validated experimentally and the performances in terms of speed of and quality of the gas concentration estimation are compared with the ones obtained using a photo-ionization detector.

  3. Is Open Source the ERP Cure-All?

    Science.gov (United States)

    Panettieri, Joseph C.

    2008-01-01

    Conventional and hosted applications thrive, but open source ERP (enterprise resource planning) is coming on strong. In many ways, the evolution of the ERP market is littered with ironies. When Oracle began buying up customer relationship management (CRM) and ERP companies, some universities worried that they would be left with fewer choices and…

  4. Digital Preservation in Open-Source Digital Library Software

    Science.gov (United States)

    Madalli, Devika P.; Barve, Sunita; Amin, Saiful

    2012-01-01

    Digital archives and digital library projects are being initiated all over the world for materials of different formats and domains. To organize, store, and retrieve digital content, many libraries as well as archiving centers are using either proprietary or open-source software. While it is accepted that print media can survive for centuries with…

  5. The Babel of software development : linguistic diversity in open source

    NARCIS (Netherlands)

    Vasilescu, B.N.; Serebrenik, A.; Brand, van den M.G.J.; Jatowt, A.; Lim, E.-P.; Ding, Y.

    2013-01-01

    Open source software (OSS) development communities are typically very specialised, on the one hand, and experience high turnover, on the other. Combination of specialization and turnover can cause parts of the system implemented in a certain programming language to become unmaintainable, if

  6. Security Vulnerabilities of the Web Based Open Source Information ...

    African Journals Online (AJOL)

    This paper exposes security vulnerabilities of the web based Open Source Information Systems (OSIS) from both system angle and human perspectives.It shows the extent of risk that can likely hinder adopting organization from attaning full intended benefits of using OSIS software. To undertake this study, a case study ...

  7. Panel: Governance in Open Source Projects and Communities

    Science.gov (United States)

    Bolici, Francesco; de Laat, Paul; Ljungberg, Jan; Pontiggia, Andrea; Rossi Lamastra, Cristina

    “Although considerable research has been devoted to the growth and expansion of open source communities and the comparison between the efficiency of corporate structures and community structures in the field of software development, rather less attention has been paid to their governance structures (control, monitoring, supervision)” (Lattemann and Stieglitz 2005).

  8. Beyond Open Source: Evaluating the Community Availability of Software

    Directory of Open Access Journals (Sweden)

    Bret Davidson

    2016-01-01

    Full Text Available The Code4Lib community has produced an increasingly impressive collection of open source software over the last decade, but much of this creative work remains out of reach for large portions of the library community. Do the relatively privileged institutions represented by a majority of Code4Lib participants have a professional responsibility to support the adoption of their innovations? Drawing from old and new software packaging and distribution approaches (from freeware to Docker, we propose extending the open source software values of collaboration and transparency to include the wide and affordable distribution of software. We believe this will not only simplify the process of sharing our applications within the library community, but also make it possible for less well-resourced institutions to actually use our software. We identify areas of need, present our experiences with the users of our own open source projects, discuss our attempts to go beyond open source, propose a preliminary set of technology availability performance indicators for evaluating software availability, and make an argument for the internal value of supporting and encouraging a vibrant library software ecosystem.

  9. Open-source intelligence and privacy by design

    NARCIS (Netherlands)

    Koops, B.J.; Hoepman, J.H.; Leenes, R.

    2013-01-01

    As demonstrated by other papers on this issue, open-source intelligence (OSINT) by state authorities poses challenges for privacy protection and intellectual-property enforcement. A possible strategy to address these challenges is to adapt the design of OSINT tools to embed normative requirements,

  10. ARLearn - Open source mobile application platform for learning

    NARCIS (Netherlands)

    Börner, Dirk; Ternier, Stefaan; Klemke, Roland; Schmitz, Birgit; Kalz, Marco; Tabuenca, Bernardo; Specht, Marcus

    2013-01-01

    Börner, D., Ternier, S., Klemke, R., Schmitz, B., Kalz, M., Tabuenca, B., & Specht, M. (2013). ARLearn - Open source mobile application platform for learning. In D. Hernández-Leo et al. (Eds.), Scaling up Learning for Sustained Impact. Proceedings of the 8th European Conference on Technology

  11. On the maturity of open source BPM systems

    NARCIS (Netherlands)

    Wohed, P.; Hofstede, ter A.H.M.; Russell, N.C.; Andersson, B.; Aalst, van der W.M.P.

    2009-01-01

    Introduction: Two major trends in the area of information systems development are (1) the growing interest in Workflow and Business Process Management (BPM) systems and (2) the increasing acceptance and use of open source software. This development raises the following questions: 1. What are the

  12. Dazzling new light source opens at Stanford synchrotron radiation laboratory

    CERN Multimedia

    2004-01-01

    SPEAR3, the Stanford Positron Electron Asymmetric Ring, was formally opened at a dedication ceremony at the Stanford Linear Accelerator Center on Jan. 29. It incorporates the latest technology to make it competitive with the best synchrotron sources in the world (1/2 page)

  13. The Value of Open Source Software Tools in Qualitative Research

    Science.gov (United States)

    Greenberg, Gary

    2011-01-01

    In an era of global networks, researchers using qualitative methods must consider the impact of any software they use on the sharing of data and findings. In this essay, I identify researchers' main areas of concern regarding the use of qualitative software packages for research. I then examine how open source software tools, wherein the publisher…

  14. Critical Analysis on Open Source LMSs Using FCA

    Science.gov (United States)

    Sumangali, K.; Kumar, Ch. Aswani

    2013-01-01

    The objective of this paper is to apply Formal Concept Analysis (FCA) to identify the best open source Learning Management System (LMS) for an E-learning environment. FCA is a mathematical framework that represents knowledge derived from a formal context. In constructing the formal context, LMSs are treated as objects and their features as…

  15. Higher Education Sub-Cultures and Open Source Adoption

    Science.gov (United States)

    van Rooij, Shahron Williams

    2011-01-01

    Successful adoption of new teaching and learning technologies in higher education requires the consensus of two sub-cultures, namely the technologist sub-culture and the academic sub-culture. This paper examines trends in adoption of open source software (OSS) for teaching and learning by comparing the results of a 2009 survey of 285 Chief…

  16. Intrinsic Motivation versus Signaling in Open Source Software Development

    DEFF Research Database (Denmark)

    Bitzer, J; Schrettl, W; Schröder, P

    This papers sheds light on the puzzling fact that even though open source software (OSS) is a public good, it is developed for free by highly qualified, young, motivated individuals, and evolves at a rapid pace. We show that when OSS development is understood as the private provision of a public...

  17. The Economics of Open Source Software Development: An Introduction

    DEFF Research Database (Denmark)

    Schröder, Philipp J.H.; Bitzer, Jürgen

    2006-01-01

    This chapter introduces the fundamentals of Open Source Software, its nature, the central economic aspects and the key mechanisms of its development. Furthermore, we present the themes of the book and provide a first overview for the reader by giving short summaries of its chapters....

  18. Open Source Projects in Software Engineering Education: A Mapping Study

    Science.gov (United States)

    Nascimento, Debora M. C.; Almeida Bittencourt, Roberto; Chavez, Christina

    2015-01-01

    Context: It is common practice in academia to have students work with "toy" projects in software engineering (SE) courses. One way to make such courses more realistic and reduce the gap between academic courses and industry needs is getting students involved in open source projects (OSP) with faculty supervision. Objective: This study…

  19. Zotero : a free and open-source reference manager

    DEFF Research Database (Denmark)

    Courraud, Julie

    2014-01-01

    Zotero is a free, open-source reference management program compatible with Linux®, Mac®, and Windows® operating systems. Libraries are backed up online allowing sharing between computers and even multiple users. Zotero makes it easy to keep your reference library organised and ‘clean’. Reference...

  20. A survey of open source multiphysics frameworks in engineering

    NARCIS (Netherlands)

    Babur, O.; Smilauer, V.; Verhoeff, T.; Brand, van den M.G.J.

    2015-01-01

    This paper presents a systematic survey of open source multiphysics frameworks in the en- gineering domains. These domains share many commonalities despite the diverse application areas. A thorough search for the available frameworks with both academic and industrial ori- gins has revealed numerous

  1. Educatie en open-source software: meer dan gratis tools.

    NARCIS (Netherlands)

    Bakker, de G.M.

    2008-01-01

    In het onderwijs wordt steeds meer open source software gebruikt, zo merkt ook Gijs de Bakker*. In de regel moet daar niet al te veel achtergezocht worden. 'Het is in de regel niet meer dan een slimme manier om aan gratis en doorgaans kwalitatief goede software te komen'. Wat De Bakker betreft een

  2. Open source communities: an integrally informed approach to organizational transformation

    NARCIS (Netherlands)

    Millar-Schijf, Carla C.J.M.; Choi, C.J.; Russell, E.T.; Kim, J.-B.

    2005-01-01

    Purpose - To reframe analysis of the open source software (OSS) phenomenon from an AQAL perspectiveDesign/methodology/approach - The approach is a review of current research thinking and application of the AQAL framework to suggest resolution of polarizations.Findings - The authors find that AQAL is

  3. Large Data Visualization with Open-Source Tools

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Visualization and post-processing of large data have become increasingly challenging and require more and more tools to support the diversity of data to process. In this seminar, we will present a suite of open-source tools supported and developed by Kitware to perform large-scale data visualization and analysis. In particular, we will present ParaView, an open-source tool for parallel visualization of massive datasets, the Visualization Toolkit (VTK), an open-source toolkit for scientific visualization, and Tangelohub, a suite of tools for large data analytics. About the speaker Julien Jomier is directing Kitware's European subsidiary in Lyon, France, where he focuses on European business development. Julien works on a variety of projects in the areas of parallel and distributed computing, mobile computing, image processing, and visualization. He is one of the developers of the Insight Toolkit (ITK), the Visualization Toolkit (VTK), and ParaView. Julien is also leading the CDash project, an open-source co...

  4. Exploring Coordination Structures in Open Source Software Development

    NARCIS (Netherlands)

    van Hillegersberg, Jos; Harmsen, Frank; Hegeman, J.H.; Amrit, Chintan Amrit; Geisberger, Eva; Keil, Patrick; Kuhrmann, Marco

    2007-01-01

    Coordination is difficult to achieve in a large globally distributed project setting. The problem is multiplied in open source software development projects, where most of the traditional means of coordination such as plans, system-level designs, schedules and defined process are not used. In order

  5. Free and Open Source Management Information Systems and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    What is the impact of introducing an automated management information system within a microfinance institution or savings and credit cooperative on the employees, the clients and the business processes? The project will involve deployment of an open source management information system (Mifos Vanilla) in two ...

  6. Using a free open source software to teach mathematics

    OpenAIRE

    Botana, F.; Abánades, M. A.; Escribano Martínez, Jesús

    2012-01-01

    We present the experience of the authors teaching mathematics to freshmen engineering students with the help of the open source computer algebra system Sage. We describe some teaching resources and present an ad hoc distribution of Sage used by the authors.

  7. Open Source and Proprietary Project Management Tools for SMEs.

    Directory of Open Access Journals (Sweden)

    Veronika Abramova

    2017-05-01

    Full Text Available The dimensional growth and increasing difficulty in project management promoted the development of different tools that serve to facilitate project management and track project schedule, resources and overall progress. These tools offer a variety of features, from task and time management, up to integrated CRM (Customer Relationship Management and ERP (Enterprise Resource Planning modules. Currently, a large number of project management software is available, to assist project team during the entire project lifecycle. We present the main differences between open source and proprietary project management tools and how those could be important for SMEs, describing the key features and how those can assist the project manager and the development team. In this paper, we analyse four open-source project management tools: OpenProject, ProjectLibre, Redmine, LibrePlan and four proprietary tools: Bitrix24, JIRA, Microsoft Project and Asana.

  8. Applying open source innovation approaches in developing business innovation

    DEFF Research Database (Denmark)

    Aagaard, Annabeth; Lindgren, Peter

    2015-01-01

    and managed effectively in developing business model innovation. The aim of this paper is therefore to close this research gap and to provide new knowledge within the research field of OI and OI applications. Thus, in the present study we explore the facilitation and management of open source innovation...... in developing business model innovation in the context of an international OI contest across five international case companies. The findings reveal six categories of key antecedents in effective facilitation and management of OI in developing business model innovation.......More and more companies are pursuing continuous innovation through different types of open source innovation and across different partners. The growing interest in open innovation (OI) originates both from the academic community as well as amongst practitioners motivating further investigation...

  9. Value implications of open source software : an empirical outlook to the open innovation model

    OpenAIRE

    Aksoy-Yurdagül, Dilan

    2016-01-01

    This thesis consists of three essays on open source software (OSS) phenomenon, which constitutes a suitable setting for investigating the open innovation paradigm and the benefits of firm-community collaborations for a firm. The first essay examines the impact of firms’ stocks of intellectual property right endowments on the relationship between firms’ OSS product portfolio and its firm value. The results suggest that firms taking more commercial actions in OSS paradigm enha...

  10. The Morfeo Open Source Community: Building Technologies of the Future Web through Open Innovation

    OpenAIRE

    Lizcano Casas, David; Jiménez Gañán, Miguel; Soriano Camino, Francisco Javier; Hierro, Juan Jose; Martínez, Andres L.

    2009-01-01

    Nowadays enterprise collaboration is becoming essential for valuable innovation and competitive advantage. This collaboration has to be brought a step forward from technical collaboration till collective smart exploitation of global intelligence. Morfeo Open Source Community implements it as an open innovation schema of collaboration among SME’s, universities, research centres, public administration and major corporations. Its disruptive contribution to the state of the art is to manage the c...

  11. Open Drug Discovery Toolkit (ODDT): a new open-source player in the drug discovery field.

    Science.gov (United States)

    Wójcikowski, Maciej; Zielenkiewicz, Piotr; Siedlecki, Pawel

    2015-01-01

    There has been huge progress in the open cheminformatics field in both methods and software development. Unfortunately, there has been little effort to unite those methods and software into one package. We here describe the Open Drug Discovery Toolkit (ODDT), which aims to fulfill the need for comprehensive and open source drug discovery software. The Open Drug Discovery Toolkit was developed as a free and open source tool for both computer aided drug discovery (CADD) developers and researchers. ODDT reimplements many state-of-the-art methods, such as machine learning scoring functions (RF-Score and NNScore) and wraps other external software to ease the process of developing CADD pipelines. ODDT is an out-of-the-box solution designed to be easily customizable and extensible. Therefore, users are strongly encouraged to extend it and develop new methods. We here present three use cases for ODDT in common tasks in computer-aided drug discovery. Open Drug Discovery Toolkit is released on a permissive 3-clause BSD license for both academic and industrial use. ODDT's source code, additional examples and documentation are available on GitHub (https://github.com/oddt/oddt).

  12. Open Ephys: an open-source, plugin-based platform for multichannel electrophysiology.

    Science.gov (United States)

    Siegle, Joshua H; López, Aarón Cuevas; Patel, Yogi A; Abramov, Kirill; Ohayon, Shay; Voigts, Jakob

    2017-08-01

    Closed-loop experiments, in which causal interventions are conditioned on the state of the system under investigation, have become increasingly common in neuroscience. Such experiments can have a high degree of explanatory power, but they require a precise implementation that can be difficult to replicate across laboratories. We sought to overcome this limitation by building open-source software that makes it easier to develop and share algorithms for closed-loop control. We created the Open Ephys GUI, an open-source platform for multichannel electrophysiology experiments. In addition to the standard 'open-loop' visualization and recording functionality, the GUI also includes modules for delivering feedback in response to events detected in the incoming data stream. Importantly, these modules can be built and shared as plugins, which makes it possible for users to extend the functionality of the GUI through a simple API, without having to understand the inner workings of the entire application. In combination with low-cost, open-source hardware for amplifying and digitizing neural signals, the GUI has been used for closed-loop experiments that perturb the hippocampal theta rhythm in a phase-specific manner. The Open Ephys GUI is the first widely used application for multichannel electrophysiology that leverages a plugin-based workflow. We hope that it will lower the barrier to entry for electrophysiologists who wish to incorporate real-time feedback into their research.

  13. openBIS ELN-LIMS: an open-source database for academic laboratories.

    Science.gov (United States)

    Barillari, Caterina; Ottoz, Diana S M; Fuentes-Serna, Juan Mariano; Ramakrishnan, Chandrasekhar; Rinn, Bernd; Rudolf, Fabian

    2016-02-15

    The open-source platform openBIS (open Biology Information System) offers an Electronic Laboratory Notebook and a Laboratory Information Management System (ELN-LIMS) solution suitable for the academic life science laboratories. openBIS ELN-LIMS allows researchers to efficiently document their work, to describe materials and methods and to collect raw and analyzed data. The system comes with a user-friendly web interface where data can be added, edited, browsed and searched. The openBIS software, a user guide and a demo instance are available at https://openbis-eln-lims.ethz.ch. The demo instance contains some data from our laboratory as an example to demonstrate the possibilities of the ELN-LIMS (Ottoz et al., 2014). For rapid local testing, a VirtualBox image of the ELN-LIMS is also available. © The Author 2015. Published by Oxford University Press.

  14. Open Source Cloud-Based Technologies for Bim

    Science.gov (United States)

    Logothetis, S.; Karachaliou, E.; Valari, E.; Stylianidis, E.

    2018-05-01

    This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC) projects. Besides, the development of Open Source Software (OSS) has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

  15. A Survey of Open Source Tools for Business Intelligence

    DEFF Research Database (Denmark)

    Thomsen, Christian; Pedersen, Torben Bach

    The industrial use of open source Business Intelligence (BI) tools is becoming more common, but is still not as widespread as for other types of software.  It is therefore of interest to explore which possibilities are available for open source BI and compare the tools. In this survey paper, we c......The industrial use of open source Business Intelligence (BI) tools is becoming more common, but is still not as widespread as for other types of software.  It is therefore of interest to explore which possibilities...... are available for open source BI and compare the tools. In this survey paper, we consider the capabilities of a number of open source tools for BI. In the paper, we consider a number of Extract‐Transform‐Load (ETL) tools, database management systems (DBMSs), On‐Line Analytical Processing (OLAP) servers, and OLAP clients. We find that, unlike the situation a few years ago, there now...

  16. OPEN SOURCE CLOUD-BASED TECHNOLOGIES FOR BIM

    Directory of Open Access Journals (Sweden)

    S. Logothetis

    2018-05-01

    Full Text Available This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC projects. Besides, the development of Open Source Software (OSS has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.

  17. Online Optimal Switching Frequency Selection for Grid-Connected Voltage Source Inverters

    Directory of Open Access Journals (Sweden)

    Saher Albatran

    2017-12-01

    Full Text Available Enhancing the performance of the voltage source inverters (VSIs without changing the hardware structure has recently acquired an increased amount of interest. In this study, an optimization algorithm, enhancing the quality of the output power and the efficiency of three-phase grid connected VSIs is proposed. Towards that end, the proposed algorithm varies the switching frequency (fsw to maintain the best balance between switching losses of the insulated-gate-bipolar-transistor (IGBT power module as well as the output power quality under all loading conditions, including the ambient temperature effect. Since there is a contradiction with these two measures in relation to the switching frequency, the theory of multi-objective optimization is employed. The proposed algorithm is executed on the platform of Altera® DE2-115 field-programmable-gate-array (FPGA in which the optimal value of the switching frequency is determined online without the need for heavy offline calculations and/or lookup tables. With adopting the proposed algorithm, there is an improvement in the VSI efficiency without degrading the output power quality. Therefore, the proposed algorithm enhances the lifetime of the IGBT power module because of reduced variations in the module’s junction temperature. An experimental prototype is built, and experimental tests are conducted for the verification of the viability of the proposed algorithm.

  18. Investigation of electron and ion flows in the microsecond plasma opening switch on the terawatt power level

    International Nuclear Information System (INIS)

    Bastrikov, A.N.; Bugaev, S.P.; Volkov, A.M.; Kim, A.A.; Kovalchuk, B.M.; Kokshener, V.M.; Yakovlev, V.A.; Bystritskii, V.M.; Grigoriev, S.V.; Krasik, Ya.E.

    1989-01-01

    The results of an investigation of ion and electron flows in the coaxial microsecond plasma opening switch (POS) at generator GIT-4 are given. The 1 mks front duration POS with outer and inner electrodes of 210 mm and 75 mm diameters respectively switched 1 MA pulse during 0.1 mks to the short circuited coaxial line with the same diameters and 120 cm of length. The polarity of the inner electrode was negative. The plasma of the POS was injected from outer electrode by 32 plasma guns of capillary type. The typical POS voltage was 0.9-1.2 MV. The calculated energy losses in the POS during the switching phase reached (0.1-0.15) MJ. The calorimetric measurements of the energy dissipated on both electrodes gave the same value. The location and distribution of the head absorbed along the POS electrodes were determined

  19. Applications of Open Source 3-D Printing on Small Farms

    Directory of Open Access Journals (Sweden)

    Joshua M. Pearce

    2013-12-01

    Full Text Available There is growing evidence that low-cost open-source 3-D printers can reduce costs by enabling distributed manufacturing of substitutes for both specialty equipment and conventional mass-manufactured products. The rate of 3-D printable designs under open licenses is growing exponentially and there arealready hundreds of designs applicable to small-scale organic farming. It has also been hypothesized that this technology could assist sustainable development in rural communities that rely on small-scale organic agriculture. To gauge the present utility of open-source 3-D printers in this organic farm context both in the developed and developing world, this paper reviews the current open-source designs available and evaluates the ability of low-cost 3-D printers to be effective at reducing the economic costs of farming.This study limits the evaluation of open-source 3-D printers to only the most-developed fused filament fabrication of the bioplastic polylactic acid (PLA. PLA is a strong biodegradable and recyclable thermoplastic appropriate for a range of representative products, which are grouped into five categories of prints: handtools, food processing, animal management, water management and hydroponics. The advantages and shortcomings of applying 3-D printing to each technology are evaluated. The results show a general izabletechnical viability and economic benefit to adopting open-source 3-D printing for any of the technologies, although the individual economic impact is highly dependent on needs and frequency of use on a specific farm. Capital costs of a 3-D printer may be saved from on-farm printing of a single advanced analytical instrument in a day or replacing hundreds of inexpensive products over a year. In order for the full potential of open-source 3-D printing to be realized to assist organic farm economic resiliency and self-sufficiency, future work is outlined in five core areas: designs of 3-D printable objects, 3-D printing

  20. 49 CFR 236.528 - Restrictive condition resulting from open hand-operated switch; requirement.

    Science.gov (United States)

    2010-10-01

    ... SYSTEMS, DEVICES, AND APPLIANCES Automatic Train Stop, Train Control and Cab Signal Systems Rules and...-operated switch three-eighths inch or more, or hand-operated switch is not locked where facing point lock with circuit controller is used, the resultant restrictive condition of an automatic train stop or...

  1. OSeMOSYS: The Open Source Energy Modeling System

    International Nuclear Information System (INIS)

    Howells, Mark; Rogner, Holger; Strachan, Neil; Heaps, Charles; Huntington, Hillard; Kypreos, Socrates; Hughes, Alison; Silveira, Semida; DeCarolis, Joe; Bazillian, Morgan; Roehrl, Alexander

    2011-01-01

    This paper discusses the design and development of the Open Source Energy Modeling System (OSeMOSYS). It describes the model's formulation in terms of a 'plain English' description, algebraic formulation, implementation-in terms of its full source code, as well as a detailed description of the model inputs, parameters, and outputs. A key feature of the OSeMOSYS implementation is that it is contained in less than five pages of documented, easily accessible code. Other existing energy system models that do not have this emphasis on compactness and openness makes the barrier to entry by new users much higher, as well as making the addition of innovative new functionality very difficult. The paper begins by describing the rationale for the development of OSeMOSYS and its structure. The current preliminary implementation of the model is then demonstrated for a discrete example. Next, we explain how new development efforts will build on the existing OSeMOSYS codebase. The paper closes with thoughts regarding the organization of the OSeMOSYS community, associated capacity development efforts, and linkages to other open source efforts including adding functionality to the LEAP model. - Highlights: → OSeMOSYS is a new free and open source energy systems. → This model is written in a simple, open, flexible and transparent manner to support teaching. → OSeMOSYS is based on free software and optimizes using a free solver. → This model replicates the results of many popular tools, such as MARKAL. → A link between OSeMOSYS and LEAP has been developed.

  2. Operation and Modulation of H7 Current Source Inverter with Hybrid SiC and Si Semiconductor Switches

    DEFF Research Database (Denmark)

    Wang, Weiqi; Gao, Feng; Yang, Yongheng

    2018-01-01

    This paper proposes an H7 current source inverter (CSI) consisting of a single parallel-connected silicon carbide (SiC) switch and a traditional silicon (Si) H6 CSI. The proposed H7 CSI takes the advantages of the SiC switch to maintain high efficiency, while significantly increasing the switching...... as an all-SiC-switch converter in terms of high performance and high efficiency with reduced DC inductance. It provides a cost-effective solution to addressing the efficiency issue of conventional CSI systems. Simulations and experiments are performed to validate the effectiveness of the proposed H7 CSI...

  3. New Switched-Dual-Source Multilevel Inverter for Symmetrical and Asymmetrical Operation

    Directory of Open Access Journals (Sweden)

    Kennedy Adinbo Aganah

    2018-04-01

    Full Text Available The increasing integration of large solar PV and wind farms into the power grid has fueled, over the past two decades, growing demands for high-power, high-voltage, utility-scale inverters. Multilevel inverters have emerged as the industry’s choice for megawatt-range inverters because of their reduced voltage stress, capability for generating an almost-sinusoidal voltage, built-in redundancy and other benefits. This paper presents a novel switched-source multilevel inverter (SS MLI architecture. This new inverter shows superior capabilities when compared to existing topologies. It has reduced voltage stress on the semiconductor, uses fewer switches (i.e., reduced size/weight/cost and exhibits increased efficiency. The proposed SS MLI is comprised of two voltage sources ( V 1 , V 2 and six switches. It is capable of generating five-level output voltage in symmetric mode (i.e., V 1 = V 2 and seven-level output voltage in asymmetric mode (i.e., V 1 ≠ V 2 . We present simulations results (using MATLAB®/Simulink® for five- and seven-level output voltages, and they strongly support the validity of the proposed inverter. These positive results are further supported experimentally using a laboratory prototype.

  4. HARVESTING, INTEGRATING AND DISTRIBUTING LARGE OPEN GEOSPATIAL DATASETS USING FREE AND OPEN-SOURCE SOFTWARE

    Directory of Open Access Journals (Sweden)

    R. Oliveira

    2016-06-01

    Full Text Available Federal, State and Local government agencies in the USA are investing heavily on the dissemination of Open Data sets produced by each of them. The main driver behind this thrust is to increase agencies’ transparency and accountability, as well as to improve citizens’ awareness. However, not all Open Data sets are easy to access and integrate with other Open Data sets available even from the same agency. The City and County of Denver Open Data Portal distributes several types of geospatial datasets, one of them is the city parcels information containing 224,256 records. Although this data layer contains many pieces of information it is incomplete for some custom purposes. Open-Source Software were used to first collect data from diverse City of Denver Open Data sets, then upload them to a repository in the Cloud where they were processed using a PostgreSQL installation on the Cloud and Python scripts. Our method was able to extract non-spatial information from a ‘not-ready-to-download’ source that could then be combined with the initial data set to enhance its potential use.

  5. OpenPSTD : The open source implementation of the pseudospectral time-domain method

    NARCIS (Netherlands)

    Krijnen, T.; Hornikx, M.C.J.; Borkowski, B.

    2014-01-01

    An open source implementation of the pseudospectral time-domain method for the propagation of sound is presented, which is geared towards applications in the built environment. Being a wavebased method, PSTD captures phenomena like diffraction, but maintains efficiency in processing time and memory

  6. A Dozen Years after Open Source's 1998 Birth, It's Time for "OpenTechComm"

    Science.gov (United States)

    Still, Brian

    2010-01-01

    2008 marked the 10-year Anniversary of the Open Source movement, which has had a substantial impact on not only software production and adoption, but also on the sharing and distribution of information. Technical communication as a discipline has taken some advantage of the movement or its derivative software, but this article argues not as much…

  7. Opening Up to Open Source: Looking at How Moodle Was Adopted in Higher Education

    Science.gov (United States)

    Costello, Eamon

    2013-01-01

    The virtual learning environment (VLE) has grown to become a piece of complex infrastructure that is now deemed critical to higher educational provision. This paper looks at Moodle and its adoption in higher education. Moodle's origins, as an open source VLE, are investigated and its growth examined in the context of how higher educational…

  8. OpenPSTD : The open source pseudospectral time-domain method for acoustic propagation

    NARCIS (Netherlands)

    Hornikx, M.C.J.; Krijnen, T.F.; van Harten, L.

    2016-01-01

    An open source implementation of the Fourier pseudospectral time-domain (PSTD) method for computing the propagation of sound is presented, which is geared towards applications in the built environment. Being a wave-based method, PSTD captures phenomena like diffraction, but maintains efficiency in

  9. Going open source: some lessons learned from the development of OpenRecLink

    Directory of Open Access Journals (Sweden)

    Kenneth Rochel de Camargo Jr.

    2015-02-01

    Full Text Available Record linkage is the process of identifying and merging records across different databases belonging to the same entity. The health sector is one of the pioneering areas of record linkage techniques applications. In 1998 we began the development of a software package, called RecLink that implemented probabilistic record linkage techniques. In this article we report the development of a new, open-source version of that program, now named OpenRecLink. The aim of this article is to present the main characteristics of the new version and some of the lessons learned during its development. The new version is a total rewrite of the program, based on three goals: (1 to migrate to a free and open source software (FOSS platform; (2 to implement a multiplatform version; (3 to implement the support for internationalization. We describe the tools that we adopted, the process of development and some of the problems encountered.

  10. Mega-Amp Opening Switch with Nested Electrodes/Pulsed Generator of Ion and Ion Cluster Beams.

    Science.gov (United States)

    1985-07-01

    i.e., noncollisiona].) resistivity which controls the "~switch opening" function (specifically, the rate of disintergration of the PF pinch where...unaffected the pinch field Be and then disassemble in a light (D) component and other heavy components. Production and propagation of-neutrals (from...emission, production and - evaporation would imply a distorsion of the pinholeimage-because of B -which is not p.-.. observed (our pinhole resolution is 150

  11. Dynamics of the plasma injected into the gap of a plasma opening switch across a strong magnetic field

    International Nuclear Information System (INIS)

    Dolgachev, G. I.; Maslennikov, D. D.; Ushakov, A. G.; Fedotkin, A. S.; Khodeev, I. A.; Shvedov, A. A.

    2011-01-01

    A method is proposed to increase the linear charge density transferred through a plasma opening switch (POS) and, accordingly, reduce the POS diameter by enhancing the external magnetic field in the POS gap. Results are presented from experimental studies of the dynamics of the plasma injected into the POS gap across a strong magnetic field. The possibility of closing the POS gap by the plasma injected across an external magnetic field of up to 60 kG is demonstrated.

  12. Development open source microcontroller based temperature data logger

    Science.gov (United States)

    Abdullah, M. H.; Che Ghani, S. A.; Zaulkafilai, Z.; Tajuddin, S. N.

    2017-10-01

    This article discusses the development stages in designing, prototyping, testing and deploying a portable open source microcontroller based temperature data logger for use in rough industrial environment. The 5V powered prototype of data logger is equipped with open source Arduino microcontroller for integrating multiple thermocouple sensors with their module, secure digital (SD) card storage, liquid crystal display (LCD), real time clock and electronic enclosure made of acrylic. The program for the function of the datalogger is programmed so that 8 readings from the thermocouples can be acquired within 3 s interval and displayed on the LCD simultaneously. The recorded temperature readings at four different points on both hydrodistillation show similar profile pattern and highest yield of extracted oil was achieved on hydrodistillation 2 at 0.004%. From the obtained results, this study achieved the objective of developing an inexpensive, portable and robust eight channels temperature measuring module with capabilities to monitor and store real time data.

  13. CLS A Fully Open-Source Control System

    CERN Document Server

    Matias, Elder; Johnson, Terry; Tanner, Robby; Wilson, Tony; Wright, Glen; Zhang, Hao

    2005-01-01

    The Canadian Light Source is one of the first major accelerator facility to adopt a fully open source control system. The control system is based on Experimental Physics and Industrial Control System (EPICS) in use at may other facilities. From the outset CLS utilised RTEMS and Linux as the underlying operating systems for real-time control computers, operator interface computers and servers. When communicating with PLC and other intelligent devices CLS has also adopted a policy of using open communications protocols where possible. Combined these strategies have lead to a system that can easily evolve over the life of the facility without being tied to specific hardware or software suppliers. The operational experience over the past few years has indicates the selected architecture is sufficiently robust and reliable.

  14. Clawpack: Building an open source ecosystem for solving hyperbolic PDEs

    Science.gov (United States)

    Iverson, Richard M.; Mandli, K.T.; Ahmadia, Aron J.; Berger, M.J.; Calhoun, Donna; George, David L.; Hadjimichael, Y.; Ketcheson, David I.; Lemoine, Grady L.; LeVeque, Randall J.

    2016-01-01

    Clawpack is a software package designed to solve nonlinear hyperbolic partial differential equations using high-resolution finite volume methods based on Riemann solvers and limiters. The package includes a number of variants aimed at different applications and user communities. Clawpack has been actively developed as an open source project for over 20 years. The latest major release, Clawpack 5, introduces a number of new features and changes to the code base and a new development model based on GitHub and Git submodules. This article provides a summary of the most significant changes, the rationale behind some of these changes, and a description of our current development model. Clawpack: building an open source ecosystem for solving hyperbolic PDEs.

  15. astroplan: An Open Source Observation Planning Package in Python

    Science.gov (United States)

    Morris, Brett M.; Tollerud, Erik; Sipőcz, Brigitta; Deil, Christoph; Douglas, Stephanie T.; Berlanga Medina, Jazmin; Vyhmeister, Karl; Smith, Toby R.; Littlefair, Stuart; Price-Whelan, Adrian M.; Gee, Wilfred T.; Jeschke, Eric

    2018-03-01

    We present astroplan—an open source, open development, Astropy affiliated package for ground-based observation planning and scheduling in Python. astroplan is designed to provide efficient access to common observational quantities such as celestial rise, set, and meridian transit times and simple transformations from sky coordinates to altitude-azimuth coordinates without requiring a detailed understanding of astropy’s implementation of coordinate systems. astroplan provides convenience functions to generate common observational plots such as airmass and parallactic angle as a function of time, along with basic sky (finder) charts. Users can determine whether or not a target is observable given a variety of observing constraints, such as airmass limits, time ranges, Moon illumination/separation ranges, and more. A selection of observation schedulers are included that divide observing time among a list of targets, given observing constraints on those targets. Contributions to the source code from the community are welcome.

  16. Automatic opening system for radioactive source in teaching laboratory

    International Nuclear Information System (INIS)

    Seren, Maria Emilia Gibin; Gaal, Vladimir; Rodrigues, Varlei; Morais, Sergio Luiz de

    2013-01-01

    Compton scattering phenomenon is experimentally studied during the medical physics laboratory course at the University of Campinas (UNICAMP). The Teaching Laboratory of Medical Physics from IFGW/UNICAMP has a structure for its development: a fixed 137 Cs sealed source with activity 610.5MBq, whose emitted radiation collides on a target, and a scintillation detector that turns around the target and detects scattered photons spectrum. 137 Cs source is stored in a lead shield with a collimating window for the gamma radiation emitted with energy of 0.662MeV. This source is exposed only when attenuation barrier protecting the collimating window is opened. The process of opening and closing the attenuation barrier may deliver radiation dose to users when done manually. Taking into account the stochastic harmful effects of ionizing radiation, the objective of this project was to develop an automatic exposure system of the radioactive source in order to reduce the dose during the Compton scattering experiment. The developed system is micro controlled and performs standard operating routines and responds to emergencies. Electromagnetic lock enables quick closing barrier by gravity in case of interruption of electrical current circuit. Besides reducing the total dose of lab users, the system adds more security in the routine since it limits access to the source and prevents accidental exposure. (author)

  17. The Open-Source Alternative in E-Government

    Directory of Open Access Journals (Sweden)

    Catalin Vrabie

    2013-08-01

    Full Text Available The last decade has changed again the face of electronic world: from Web 2.0 to open source software; from e-(electronic to m-(mobile and now to touch. For Web developers is a real challenge to make compatible interfaces to all existing Internet browsers. This proves to be even more expensive than the application itself (Softnet; 2012; SIVECO, 2012. From the point of view of the big software development companies these events are just new challenges because they afford to have many employees with different skills and by that being able to cope with market demands. But what happens with the e-government projects at the local level? Budgets are small, so hiring a company specialized in Web application development is sometimes too expensive, this responsibility usually falls in many cases on the employees of the IT department (Vrabie, 2011. If we add to this software component the hardware required for hosting the Web page inside, the budgets are already completely exceeded (or obviously they can choose some other cheap solution but whose reliability is very poor – reason for dissatisfaction among citizens. The importance of the Web platforms for interacting with citizens is very well known (Friedman, 2005; Craig; 2006; Baltac, 2011. In this context, this paper aims to examine in terms of costs, the investments in open-source applications in parallel with the use of social networks as used today. The research methodology is using for the first time an adapted version of cost-effectiveness analysis. Empirical research will be carried out on two platforms of e-Government – one of them developed inside on an open-source solution - used to support a complete interaction with the citizens. The working hypothesis starts from the fact that open source software is cheaper than those developed inside – but of course this is a question to debate at.

  18. The Systems Biology Research Tool: evolvable open-source software

    OpenAIRE

    Wright, J; Wagner, A

    2008-01-01

    Abstract Background Research in the field of systems biology requires software for a variety of purposes. Software must be used to store, retrieve, analyze, and sometimes even to collect the data obtained from system-level (often high-throughput) experiments. Software must also be used to implement mathematical models and algorithms required for simulation and theoretical predictions on the system-level. Results We introduce a free, easy-to-use, open-source, integrated software platform calle...

  19. Instrumentino: An Open-Source Software for Scientific Instruments

    OpenAIRE

    Koenka, Israel Joel; Sáiz, Jorge; Hauser, Peter C.

    2015-01-01

    Scientists often need to build dedicated computer-controlled experimental systems. For this purpose, it is becoming common to employ open-source microcontroller platforms, such as the Arduino. These boards and associated integrated software development environments provide affordable yet powerful solutions for the implementation of hardware control of transducers and acquisition of signals from detectors and sensors. It is, however, a challenge to write programs that allow interactive use of ...

  20. Mitigating Spreadsheet Model Risk with Python Open Source Infrastructure

    OpenAIRE

    Beavers, Oliver

    2018-01-01

    Across an aggregation of EuSpRIG presentation papers, two maxims hold true: spreadsheets models are akin to software, yet spreadsheet developers are not software engineers. As such, the lack of traditional software engineering tools and protocols invites a higher rate of error in the end result. This paper lays ground work for spreadsheet modelling professionals to develop reproducible audit tools using freely available, open source packages built with the Python programming language, enablin...

  1. Open Sourcing Social Change: Inside the Constellation Model

    OpenAIRE

    Tonya Surman; Mark Surman

    2008-01-01

    The constellation model was developed by and for the Canadian Partnership for Children's Health and the Environment. The model offers an innovative approach to organizing collaborative efforts in the social mission sector and shares various elements of the open source model. It emphasizes self-organizing and concrete action within a network of partner organizations working on a common issue. Constellations are self-organizing action teams that operate within the broader strategic vision of a ...

  2. Development of WEB Applications of The Component – Open Source

    Directory of Open Access Journals (Sweden)

    Arturo Sergio Medina Castillo

    2013-06-01

    Full Text Available Nowadays software development not starting from scratch, however already has a set of tools provided by frameworks, which enables faster application development, relevant and indispensable factor for supporting continuous improvement processes seeking higher levels of competitiveness in this global society.In all respects the development of Web applications, whether open source or proprietary, is developing rapidly, by providing service levels of communication, interoperability, access to internal and external customers that allows management support different business processes.

  3. Tamil Open-Source Landscape - Opportunities and Challenges

    OpenAIRE

    Annamalai, Muthiah; Shrinivasan, T

    2018-01-01

    We report in this paper, Tamil open-source software community is a vibrant place with software developers, font designers, translators, voice-over artists, and general user testers, who come together for love of their language, and promotion of critical thinking, and modern language usage in Tamil. We identify a need for institutional support at various stages from grooming software developers in Tamil, to marketing platform for Tamil software. There is bright future for tamil software if we ...

  4. Nástroje Business Intelligence jako Open Source

    OpenAIRE

    Filipčík, Zdeněk

    2011-01-01

    This master's thesis focuses on the issues of selecting the Business Intelligence tools distributed under open source licenses. The main objective of this work is to compare the different instruments in all layers of the Business Intelligence architecture. The first part is focused on the definition of key concepts of the main topic. Provides necessary theoretical basis for understanding the context used in the practical part, which is dedicated to comparison tools realized according to the e...

  5. Open source tools for large-scale neuroscience.

    Science.gov (United States)

    Freeman, Jeremy

    2015-06-01

    New technologies for monitoring and manipulating the nervous system promise exciting biology but pose challenges for analysis and computation. Solutions can be found in the form of modern approaches to distributed computing, machine learning, and interactive visualization. But embracing these new technologies will require a cultural shift: away from independent efforts and proprietary methods and toward an open source and collaborative neuroscience. Copyright © 2015 The Author. Published by Elsevier Ltd.. All rights reserved.

  6. The Airplane as an Open-Source Invention

    OpenAIRE

    Peter B. Meyer

    2013-01-01

    Airplanes were invented after decades of experimentation in many countries through a process we can call open-source innovation. Experimenters, inventors, and writers contributed to the airplane’s development by sharing information in publications, in clubs, by writing letters and by visiting. The hundreds of aeronautical patents before 1900 were treated like publications, not like claims to intellectual property. Inventors of modern airplanes copied earlier designs, analogously to advances i...

  7. Guidelines on radiation protection for work with open radioactive sources

    International Nuclear Information System (INIS)

    1995-01-01

    The Danish National Institute of Radiation Protection (SIS) has published this, fourth edition of guidelines on radiation protection for work with open radiation sources. There are few changes compared to the previous edition, film doses are updated and preparation of the Danish legislation with respect to the 1991 ICRP recommendations (ICRP publication 60) is discussed. In this future recommendation the new dose limits will be proposed and new risk factors enlightened. (EG)

  8. Open-Source Automated Mapping Four-Point Probe

    Directory of Open Access Journals (Sweden)

    Handy Chandra

    2017-01-01

    Full Text Available Scientists have begun using self-replicating rapid prototyper (RepRap 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO samples of different thicknesses both pre- and post-annealing. The OS4PP was then compared to two commercial proprietary systems. Results of resistors from 10 to 1 MΩ show errors of less than 1% for the OS4PP. The 3-D mapping of sheet resistance of ITO samples successfully demonstrated the automated capability to measure non-uniformities in large-area samples. The results indicate that all measured values are within the same order of magnitude when compared to two proprietary measurement systems. In conclusion, the OS4PP system, which costs less than 70% of manual proprietary systems, is comparable electrically while offering automated 100 micron positional accuracy for measuring sheet resistance over larger areas.

  9. Open Source Platform Application to Groundwater Characterization and Monitoring

    Science.gov (United States)

    Ntarlagiannis, D.; Day-Lewis, F. D.; Falzone, S.; Lane, J. W., Jr.; Slater, L. D.; Robinson, J.; Hammett, S.

    2017-12-01

    Groundwater characterization and monitoring commonly rely on the use of multiple point sensors and human labor. Due to the number of sensors, labor, and other resources needed, establishing and maintaining an adequate groundwater monitoring network can be both labor intensive and expensive. To improve and optimize the monitoring network design, open source software and hardware components could potentially provide the platform to control robust and efficient sensors thereby reducing costs and labor. This work presents early attempts to create a groundwater monitoring system incorporating open-source software and hardware that will control the remote operation of multiple sensors along with data management and file transfer functions. The system is built around a Raspberry PI 3, that controls multiple sensors in order to perform on-demand, continuous or `smart decision' measurements while providing flexibility to incorporate additional sensors to meet the demands of different projects. The current objective of our technology is to monitor exchange of ionic tracers between mobile and immobile porosity using a combination of fluid and bulk electrical-conductivity measurements. To meet this objective, our configuration uses four sensors (pH, specific conductance, pressure, temperature) that can monitor the fluid electrical properties of interest and guide the bulk electrical measurement. This system highlights the potential of using open source software and hardware components for earth sciences applications. The versatility of the system makes it ideal for use in a large number of applications, and the low cost allows for high resolution (spatially and temporally) monitoring.

  10. Free and open-source automated 3-D microscope.

    Science.gov (United States)

    Wijnen, Bas; Petersen, Emily E; Hunt, Emily J; Pearce, Joshua M

    2016-11-01

    Open-source technology not only has facilitated the expansion of the greater research community, but by lowering costs it has encouraged innovation and customizable design. The field of automated microscopy has continued to be a challenge in accessibility due the expense and inflexible, noninterchangeable stages. This paper presents a low-cost, open-source microscope 3-D stage. A RepRap 3-D printer was converted to an optical microscope equipped with a customized, 3-D printed holder for a USB microscope. Precision measurements were determined to have an average error of 10 μm at the maximum speed and 27 μm at the minimum recorded speed. Accuracy tests yielded an error of 0.15%. The machine is a true 3-D stage and thus able to operate with USB microscopes or conventional desktop microscopes. It is larger than all commercial alternatives, and is thus capable of high-depth images over unprecedented areas and complex geometries. The repeatability is below 2-D microscope stages, but testing shows that it is adequate for the majority of scientific applications. The open-source microscope stage costs less than 3-9% of the closest proprietary commercial stages. This extreme affordability vastly improves accessibility for 3-D microscopy throughout the world. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

  11. Open-Source Automated Mapping Four-Point Probe.

    Science.gov (United States)

    Chandra, Handy; Allen, Spencer W; Oberloier, Shane W; Bihari, Nupur; Gwamuri, Jephias; Pearce, Joshua M

    2017-01-26

    Scientists have begun using self-replicating rapid prototyper (RepRap) 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP) measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO) samples of different thicknesses both pre- and post-annealing. The OS4PP was then compared to two commercial proprietary systems. Results of resistors from 10 to 1 MΩ show errors of less than 1% for the OS4PP. The 3-D mapping of sheet resistance of ITO samples successfully demonstrated the automated capability to measure non-uniformities in large-area samples. The results indicate that all measured values are within the same order of magnitude when compared to two proprietary measurement systems. In conclusion, the OS4PP system, which costs less than 70% of manual proprietary systems, is comparable electrically while offering automated 100 micron positional accuracy for measuring sheet resistance over larger areas.

  12. Open-source, community-driven microfluidics with Metafluidics.

    Science.gov (United States)

    Kong, David S; Thorsen, Todd A; Babb, Jonathan; Wick, Scott T; Gam, Jeremy J; Weiss, Ron; Carr, Peter A

    2017-06-07

    Microfluidic devices have the potential to automate and miniaturize biological experiments, but open-source sharing of device designs has lagged behind sharing of other resources such as software. Synthetic biologists have used microfluidics for DNA assembly, cell-free expression, and cell culture, but a combination of expense, device complexity, and reliance on custom set-ups hampers their widespread adoption. We present Metafluidics, an open-source, community-driven repository that hosts digital design files, assembly specifications, and open-source software to enable users to build, configure, and operate a microfluidic device. We use Metafluidics to share designs and fabrication instructions for both a microfluidic ring-mixer device and a 32-channel tabletop microfluidic controller. This device and controller are applied to build genetic circuits using standard DNA assembly methods including ligation, Gateway, Gibson, and Golden Gate. Metafluidics is intended to enable a broad community of engineers, DIY enthusiasts, and other nontraditional participants with limited fabrication skills to contribute to microfluidic research.

  13. The influence of electrical resistivity, magnetic field strength, boundary conditions, and injection conditions on the behavior of the magnetically injected plasma in the PBFA-II opening switch

    International Nuclear Information System (INIS)

    Watrous, J.J.; Frese, M.H.

    1993-01-01

    The Plasma Opening Switch used on PBFA-II uses a source plasma which is injected into the inter-electrode gap along the field lines of a modest-strength applied poloidal magnetic field. The distribution of this plasma within the gap plays an important role in the behavior of the switch. Knowledge of this distribution is critical for performing relevant switch calculations and for interpreting experimental data. In the work reported here, the influence on that distribution of the plasma electrical resistivity, the applied magnetic field strength, and the boundary and injection conditions have been investigated with the 2 1/2-dimensional magnetohydrodynamics simulation code, MACH2. The injected plasma has density in the 10 14 cm -3 range and temperature in the several eV range. In this parameter regime, the classical collision time scale is on the order of 10 ns, which, when compared to the 100 ns time scale of the inflowing plasma, means that the plasma is classically collisionless. However, mechanisms other than classical collisions are likely to contribute to electrical resistivity. The authors have investigated the effect of an anomalous resistivity which scales with the plasma frequency, varying the scaling from the electron plasma frequency to the ion plasma frequency. They will compare these results with results based on the assumption of an ideal plasma, and discuss other anomalous resistivity models

  14. OpenDrift - an open source framework for ocean trajectory modeling

    Science.gov (United States)

    Dagestad, Knut-Frode; Breivik, Øyvind; Ådlandsvik, Bjørn

    2016-04-01

    We will present a new, open source tool for modeling the trajectories and fate of particles or substances (Lagrangian Elements) drifting in the ocean, or even in the atmosphere. The software is named OpenDrift, and has been developed at Norwegian Meteorological Institute in cooperation with Institute of Marine Research. OpenDrift is a generic framework written in Python, and is openly available at https://github.com/knutfrode/opendrift/. The framework is modular with respect to three aspects: (1) obtaining input data, (2) the transport/morphological processes, and (3) exporting of results to file. Modularity is achieved through well defined interfaces between components, and use of a consistent vocabulary (CF conventions) for naming of variables. Modular input implies that it is not necessary to preprocess input data (e.g. currents, wind and waves from Eulerian models) to a particular file format. Instead "reader modules" can be written/used to obtain data directly from any original source, including files or through web based protocols (e.g. OPeNDAP/Thredds). Modularity of processes implies that a model developer may focus on the geophysical processes relevant for the application of interest, without needing to consider technical tasks such as reading, reprojecting, and colocating input data, rotation and scaling of vectors and model output. We will show a few example applications of using OpenDrift for predicting drifters, oil spills, and search and rescue objects.

  15. Methodology, Measurement and Analysis of Flow Table Update Characteristics in Hardware OpenFlow Switches

    KAUST Repository

    Kuźniar, Maciej; Pereší ni, Peter; Kostić, Dejan; Canini, Marco

    2018-01-01

    and performance characteristics is essential for ensuring successful and safe deployments.We propose a systematic methodology for SDN switch performance analysis and devise a series of experiments based on this methodology. The methodology relies on sending a

  16. Search Analytics: Automated Learning, Analysis, and Search with Open Source

    Science.gov (United States)

    Hundman, K.; Mattmann, C. A.; Hyon, J.; Ramirez, P.

    2016-12-01

    The sheer volume of unstructured scientific data makes comprehensive human analysis impossible, resulting in missed opportunities to identify relationships, trends, gaps, and outliers. As the open source community continues to grow, tools like Apache Tika, Apache Solr, Stanford's DeepDive, and Data-Driven Documents (D3) can help address this challenge. With a focus on journal publications and conference abstracts often in the form of PDF and Microsoft Office documents, we've initiated an exploratory NASA Advanced Concepts project aiming to use the aforementioned open source text analytics tools to build a data-driven justification for the HyspIRI Decadal Survey mission. We call this capability Search Analytics, and it fuses and augments these open source tools to enable the automatic discovery and extraction of salient information. In the case of HyspIRI, a hyperspectral infrared imager mission, key findings resulted from the extractions and visualizations of relationships from thousands of unstructured scientific documents. The relationships include links between satellites (e.g. Landsat 8), domain-specific measurements (e.g. spectral coverage) and subjects (e.g. invasive species). Using the above open source tools, Search Analytics mined and characterized a corpus of information that would be infeasible for a human to process. More broadly, Search Analytics offers insights into various scientific and commercial applications enabled through missions and instrumentation with specific technical capabilities. For example, the following phrases were extracted in close proximity within a publication: "In this study, hyperspectral images…with high spatial resolution (1 m) were analyzed to detect cutleaf teasel in two areas. …Classification of cutleaf teasel reached a users accuracy of 82 to 84%." Without reading a single paper we can use Search Analytics to automatically identify that a 1 m spatial resolution provides a cutleaf teasel detection users accuracy of 82

  17. A kernel for open source drug discovery in tropical diseases.

    Science.gov (United States)

    Ortí, Leticia; Carbajo, Rodrigo J; Pieper, Ursula; Eswar, Narayanan; Maurer, Stephen M; Rai, Arti K; Taylor, Ginger; Todd, Matthew H; Pineda-Lucena, Antonio; Sali, Andrej; Marti-Renom, Marc A

    2009-01-01

    Conventional patent-based drug development incentives work badly for the developing world, where commercial markets are usually small to non-existent. For this reason, the past decade has seen extensive experimentation with alternative R&D institutions ranging from private-public partnerships to development prizes. Despite extensive discussion, however, one of the most promising avenues-open source drug discovery-has remained elusive. We argue that the stumbling block has been the absence of a critical mass of preexisting work that volunteers can improve through a series of granular contributions. Historically, open source software collaborations have almost never succeeded without such "kernels". HERE, WE USE A COMPUTATIONAL PIPELINE FOR: (i) comparative structure modeling of target proteins, (ii) predicting the localization of ligand binding sites on their surfaces, and (iii) assessing the similarity of the predicted ligands to known drugs. Our kernel currently contains 143 and 297 protein targets from ten pathogen genomes that are predicted to bind a known drug or a molecule similar to a known drug, respectively. The kernel provides a source of potential drug targets and drug candidates around which an online open source community can nucleate. Using NMR spectroscopy, we have experimentally tested our predictions for two of these targets, confirming one and invalidating the other. The TDI kernel, which is being offered under the Creative Commons attribution share-alike license for free and unrestricted use, can be accessed on the World Wide Web at http://www.tropicaldisease.org. We hope that the kernel will facilitate collaborative efforts towards the discovery of new drugs against parasites that cause tropical diseases.

  18. Nowcasting influenza outbreaks using open-source media report.

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Jaideep; Brownstein, John S. [Boston Children%3CU%2B2019%3Es Hospital, Boston, MA

    2013-02-01

    We construct and verify a statistical method to nowcast influenza activity from a time-series of the frequency of reports concerning influenza related topics. Such reports are published electronically by both public health organizations as well as newspapers/media sources, and thus can be harvested easily via web crawlers. Since media reports are timely, whereas reports from public health organization are delayed by at least two weeks, using timely, open-source data to compensate for the lag in %E2%80%9Cofficial%E2%80%9D reports can be useful. We use morbidity data from networks of sentinel physicians (both the Center of Disease Control's ILINet and France's Sentinelles network) as the gold standard of influenza-like illness (ILI) activity. The time-series of media reports is obtained from HealthMap (http://healthmap.org). We find that the time-series of media reports shows some correlation ( 0.5) with ILI activity; further, this can be leveraged into an autoregressive moving average model with exogenous inputs (ARMAX model) to nowcast ILI activity. We find that the ARMAX models have more predictive skill compared to autoregressive (AR) models fitted to ILI data i.e., it is possible to exploit the information content in the open-source data. We also find that when the open-source data are non-informative, the ARMAX models reproduce the performance of AR models. The statistical models are tested on data from the 2009 swine-flu outbreak as well as the mild 2011-2012 influenza season in the U.S.A.

  19. Diagnosis method of an open-switch fault for a grid-connected T-type three-level inverter system

    DEFF Research Database (Denmark)

    Choi, U. M.; Lee, K. B.; Blaabjerg, Frede

    2012-01-01

    -tolerant control algorithm can be used when the open switch fault occurs in the middle switches. It is achieved by simply modifying the conventional SVM method. The proposed methods are advantageous as they do not require additional sensors and they do not involve complex calculations. Therefore, this method...

  20. GOSH! A roadmap for open-source science hardware

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    The goal of the Gathering for Open Science Hardware (GOSH! 2016), held from 2 to 5 March 2016 at IdeaSquare, was to lay the foundations of the open-source hardware for science movement.   The participants in the GOSH! 2016 meeting gathered in IdeaSquare. (Image: GOSH Community) “Despite advances in technology, many scientific innovations are held back because of a lack of affordable and customisable hardware,” says François Grey, a professor at the University of Geneva and coordinator of Citizen Cyberlab – a partnership between CERN, the UN Institute for Training and Research and the University of Geneva – which co-organised the GOSH! 2016 workshop. “This scarcity of accessible science hardware is particularly obstructive for citizen science groups and humanitarian organisations that don’t have the same economic means as a well-funded institution.” Instead, open sourcing science hardware co...

  1. Commodity hardware and open source solutions in FTU data management

    International Nuclear Information System (INIS)

    Centioli, C.; Bracco, G.; Eccher, S.; Iannone, F.; Maslennikov, A.; Panella, M.; Vitale, V.

    2004-01-01

    Frascati Tokamak Upgrade (FTU) data management system underwent several developments in the last year, mainly due to the availability of huge amount of open source software and cheap commodity hardware. First of all, we replaced the old and expensive four SUN/SOLARIS servers running AFS (Andrew File System) fusione.it cell with three SuperServer Supermicro SC-742. Secondly Linux 2.4 OS has been installed on our new cell servers and OpenAFS 1.2.8 open source distributed file system has replaced the commercial IBM/Transarc AFS. A pioneering solution - SGI's XFS file system for Linux - has been adopted to format one terabyte of FTU storage system on which the AFS volumes are based. Benchmark tests have shown the good performances of XFS compared to the classical ext3 Linux file system. Third, the data access software has been ported to Linux, together with the interfaces to Matlab and IDL, as well as the locally developed data display utility, SHOX. Finally a new Object-Oriented Data Model (OODM) has been developed for FTU shots data to build and maintain a FTU data warehouse (DW). FTU OODM has been developed using ROOT, an object oriented data analysis framework well-known in high energy physics. Since large volumes of data are involved, a parallel data extraction process, developed in the ROOT framework, has been implemented taking advantage of the AFS distributed environment of FTU computing system

  2. Hypersonic simulations using open-source CFD and DSMC solvers

    Science.gov (United States)

    Casseau, V.; Scanlon, T. J.; John, B.; Emerson, D. R.; Brown, R. E.

    2016-11-01

    Hypersonic hybrid hydrodynamic-molecular gas flow solvers are required to satisfy the two essential requirements of any high-speed reacting code, these being physical accuracy and computational efficiency. The James Weir Fluids Laboratory at the University of Strathclyde is currently developing an open-source hybrid code which will eventually reconcile the direct simulation Monte-Carlo method, making use of the OpenFOAM application called dsmcFoam, and the newly coded open-source two-temperature computational fluid dynamics solver named hy2Foam. In conjunction with employing the CVDV chemistry-vibration model in hy2Foam, novel use is made of the QK rates in a CFD solver. In this paper, further testing is performed, in particular with the CFD solver, to ensure its efficacy before considering more advanced test cases. The hy2Foam and dsmcFoam codes have shown to compare reasonably well, thus providing a useful basis for other codes to compare against.

  3. Commodity hardware and open source solutions in FTU data management

    Energy Technology Data Exchange (ETDEWEB)

    Centioli, C. E-mail: centioli@frascati.enea.it; Bracco, G.; Eccher, S.; Iannone, F.; Maslennikov, A.; Panella, M.; Vitale, V

    2004-06-01

    Frascati Tokamak Upgrade (FTU) data management system underwent several developments in the last year, mainly due to the availability of huge amount of open source software and cheap commodity hardware. First of all, we replaced the old and expensive four SUN/SOLARIS servers running AFS (Andrew File System) fusione.it cell with three SuperServer Supermicro SC-742. Secondly Linux 2.4 OS has been installed on our new cell servers and OpenAFS 1.2.8 open source distributed file system has replaced the commercial IBM/Transarc AFS. A pioneering solution - SGI's XFS file system for Linux - has been adopted to format one terabyte of FTU storage system on which the AFS volumes are based. Benchmark tests have shown the good performances of XFS compared to the classical ext3 Linux file system. Third, the data access software has been ported to Linux, together with the interfaces to Matlab and IDL, as well as the locally developed data display utility, SHOX. Finally a new Object-Oriented Data Model (OODM) has been developed for FTU shots data to build and maintain a FTU data warehouse (DW). FTU OODM has been developed using ROOT, an object oriented data analysis framework well-known in high energy physics. Since large volumes of data are involved, a parallel data extraction process, developed in the ROOT framework, has been implemented taking advantage of the AFS distributed environment of FTU computing system.

  4. Status and future plans for open source QuickPIC

    Science.gov (United States)

    An, Weiming; Decyk, Viktor; Mori, Warren

    2017-10-01

    QuickPIC is a three dimensional (3D) quasi-static particle-in-cell (PIC) code developed based on the UPIC framework. It can be used for efficiently modeling plasma based accelerator (PBA) problems. With quasi-static approximation, QuickPIC can use different time scales for calculating the beam (or laser) evolution and the plasma response, and a 3D plasma wake field can be simulated using a two-dimensional (2D) PIC code where the time variable is ξ = ct - z and z is the beam propagation direction. QuickPIC can be thousand times faster than the normal PIC code when simulating the PBA. It uses an MPI/OpenMP hybrid parallel algorithm, which can be run on either a laptop or the largest supercomputer. The open source QuickPIC is an object-oriented program with high level classes written in Fortran 2003. It can be found at https://github.com/UCLA-Plasma-Simulation-Group/QuickPIC-OpenSource.git

  5. An Open-Source Tool Set Enabling Analog-Digital-Software Co-Design

    Directory of Open Access Journals (Sweden)

    Michelle Collins

    2016-02-01

    Full Text Available This paper presents an analog-digital hardware-software co-design environment for simulating and programming reconfigurable systems. The tool simulates, designs, as well as enables experimental measurements after compiling to configurable systems in the same integrated design tool framework. High level software in Scilab/Xcos (open-source programs similar to MATLAB/Simulink that converts the high-level block description by the user to blif format (sci2blif, which acts as an input to the modified VPR tool, including the code v p r 2 s w c s , encoding the specific platform through specific architecture files, resulting in a targetable switch list on the resulting configurable analog–digital system. The resulting tool uses an analog and mixed-signal library of components, enabling users and future researchers access to the basic analog operations/computations that are possible.

  6. Understanding How the "Open" of Open Source Software (OSS) Will Improve Global Health Security.

    Science.gov (United States)

    Hahn, Erin; Blazes, David; Lewis, Sheri

    2016-01-01

    Improving global health security will require bold action in all corners of the world, particularly in developing settings, where poverty often contributes to an increase in emerging infectious diseases. In order to mitigate the impact of emerging pandemic threats, enhanced disease surveillance is needed to improve early detection and rapid response to outbreaks. However, the technology to facilitate this surveillance is often unattainable because of high costs, software and hardware maintenance needs, limited technical competence among public health officials, and internet connectivity challenges experienced in the field. One potential solution is to leverage open source software, a concept that is unfortunately often misunderstood. This article describes the principles and characteristics of open source software and how it may be applied to solve global health security challenges.

  7. Open Polar Server (OPS—An Open Source Infrastructure for the Cryosphere Community

    Directory of Open Access Journals (Sweden)

    Weibo Liu

    2016-03-01

    Full Text Available The Center for Remote Sensing of Ice Sheets (CReSIS at the University of Kansas has collected approximately 1000 terabytes (TB of radar depth sounding data over the Arctic and Antarctic ice sheets since 1993 in an effort to map the thickness of the ice sheets and ultimately understand the impacts of climate change and sea level rise. In addition to data collection, the storage, management, and public distribution of the dataset are also primary roles of the CReSIS. The Open Polar Server (OPS project developed a free and open source infrastructure to store, manage, analyze, and distribute the data collected by CReSIS in an effort to replace its current data storage and distribution approach. The OPS infrastructure includes a spatial database management system (DBMS, map and web server, JavaScript geoportal, and MATLAB application programming interface (API for the inclusion of data created by the cryosphere community. Open source software including GeoServer, PostgreSQL, PostGIS, OpenLayers, ExtJS, GeoEXT and others are used to build a system that modernizes the CReSIS data distribution for the entire cryosphere community and creates a flexible platform for future development. Usability analysis demonstrates the OPS infrastructure provides an improved end user experience. In addition, interpolating glacier topography is provided as an application example of the system.

  8. Open source system OpenVPN in a function of Virtual Private Network

    Science.gov (United States)

    Skendzic, A.; Kovacic, B.

    2017-05-01

    Using of Virtual Private Networks (VPN) can establish high security level in network communication. VPN technology enables high security networking using distributed or public network infrastructure. VPN uses different security and managing rules inside networks. It can be set up using different communication channels like Internet or separate ISP communication infrastructure. VPN private network makes security communication channel over public network between two endpoints (computers). OpenVPN is an open source software product under GNU General Public License (GPL) that can be used to establish VPN communication between two computers inside business local network over public communication infrastructure. It uses special security protocols and 256-bit Encryption and it is capable of traversing network address translators (NATs) and firewalls. It allows computers to authenticate each other using a pre-shared secret key, certificates or username and password. This work gives review of VPN technology with a special accent on OpenVPN. This paper will also give comparison and financial benefits of using open source VPN software in business environment.

  9. Revolution of open source and film making towards open film making

    OpenAIRE

    Löker, Koray

    2008-01-01

    Ankara : The Department of Communication and Design and the Institute of Economics and Social Sciences of Bilkent University, 2008. Thesis (Master's) -- Bilkent University, 2008. Includes bibliographical references leaves 74-80. This thesis is a critical analysis of self-proclaimed open source movie projects, Elephants Dream and The Digital Tipping Point. The theoretical framework derived from the new media discourse on film making, mainly based on Lev Manovich's database na...

  10. THE PIXHAWK OPEN-SOURCE COMPUTER VISION FRAMEWORK FOR MAVS

    Directory of Open Access Journals (Sweden)

    L. Meier

    2012-09-01

    Full Text Available Unmanned aerial vehicles (UAV and micro air vehicles (MAV are already intensively used in geodetic applications. State of the art autonomous systems are however geared towards the application area in safe and obstacle-free altitudes greater than 30 meters. Applications at lower altitudes still require a human pilot. A new application field will be the reconstruction of structures and buildings, including the facades and roofs, with semi-autonomous MAVs. Ongoing research in the MAV robotics field is focusing on enabling this system class to operate at lower altitudes in proximity to nearby obstacles and humans. PIXHAWK is an open source and open hardware toolkit for this purpose. The quadrotor design is optimized for onboard computer vision and can connect up to four cameras to its onboard computer. The validity of the system design is shown with a fully autonomous capture flight along a building.

  11. Conceptual Architecture of Building Energy Management Open Source Software (BEMOSS)

    Energy Technology Data Exchange (ETDEWEB)

    Khamphanchai, Warodom; Saha, Avijit; Rathinavel, Kruthika; Kuzlu, Murat; Pipattanasomporn, Manisa; Rahman, Saifur; Akyol, Bora A.; Haack, Jereme N.

    2014-12-01

    The objective of this paper is to present a conceptual architecture of a Building Energy Management Open Source Software (BEMOSS) platform. The proposed BEMOSS platform is expected to improve sensing and control of equipment in small- and medium-sized buildings, reduce energy consumption and help implement demand response (DR). It aims to offer: scalability, robustness, plug and play, open protocol, interoperability, cost-effectiveness, as well as local and remote monitoring. In this paper, four essential layers of BEMOSS software architecture -- namely User Interface, Application and Data Management, Operating System and Framework, and Connectivity layers -- are presented. A laboratory test bed to demonstrate the functionality of BEMOSS located at the Advanced Research Institute of Virginia Tech is also briefly described.

  12. openPSTD: The open source pseudospectral time-domain method for acoustic propagation

    Science.gov (United States)

    Hornikx, Maarten; Krijnen, Thomas; van Harten, Louis

    2016-06-01

    An open source implementation of the Fourier pseudospectral time-domain (PSTD) method for computing the propagation of sound is presented, which is geared towards applications in the built environment. Being a wave-based method, PSTD captures phenomena like diffraction, but maintains efficiency in processing time and memory usage as it allows to spatially sample close to the Nyquist criterion, thus keeping both the required spatial and temporal resolution coarse. In the implementation it has been opted to model the physical geometry as a composition of rectangular two-dimensional subdomains, hence initially restricting the implementation to orthogonal and two-dimensional situations. The strategy of using subdomains divides the problem domain into local subsets, which enables the simulation software to be built according to Object-Oriented Programming best practices and allows room for further computational parallelization. The software is built using the open source components, Blender, Numpy and Python, and has been published under an open source license itself as well. For accelerating the software, an option has been included to accelerate the calculations by a partial implementation of the code on the Graphical Processing Unit (GPU), which increases the throughput by up to fifteen times. The details of the implementation are reported, as well as the accuracy of the code.

  13. A Case Study about Open Source Internet Software in the eThekwini ...

    African Journals Online (AJOL)

    This paper describes the use of open source software applications on the web sites of the large eThekwini municipality in Durban, South Africa. The implementation of open source was both a response to the 2003 South African Government approval of open source solutions in government departments and because open ...

  14. OpenSR: An Open-Source Stimulus-Response Testing Framework

    Directory of Open Access Journals (Sweden)

    Carolyn C. Matheus

    2015-01-01

    Full Text Available Stimulus–response (S–R tests provide a unique way to acquire information about human perception by capturing automatic responses to stimuli and attentional processes. This paper presents OpenSR, a user-centered S–R testing framework providing a graphical user interface that can be used by researchers to customize, administer, and manage one type of S–R test, the implicit association test. OpenSR provides an extensible open-source Web-based framework that is platform independent and can be implemented on most computers using any operating system. In addition, it provides capabilities for automatically generating and assigning participant identifications, assigning participants to different condition groups, tracking responses, and facilitating collecting and exporting of data. The Web technologies and languages used in creating the OpenSR framework are discussed, namely, HTML5, CSS3, JavaScript, jQuery, Twitter Bootstrap, Python, and Django. OpenSR is available for free download.

  15. Openness of Innovation in Services and Software - Essays on Service Innovations, Open Source, and Hybrid Licensing Models

    OpenAIRE

    Riepula, Mikko

    2015-01-01

    Open Innovation—and Open Source as its particular manifestation in the software industry—have recently been touted as cornerstones of competitiveness for firms in the new service economy and of value added by public institutions involved in the gathering, processing and publishing of information. Although the basic concepts are by no means new, a considerable surge in research literature has occurred over the past decade around the keywords of open source, open innovation, value co-creation a...

  16. Analysis of the Degradation of MOSFETs in Switching Mode Power Supply by Characterizing Source Oscillator Signals

    Directory of Open Access Journals (Sweden)

    Xueyan Zheng

    2013-01-01

    Full Text Available Switching Mode Power Supply (SMPS has been widely applied in aeronautics, nuclear power, high-speed railways, and other areas related to national strategy and security. The degradation of MOSFET occupies a dominant position in the key factors affecting the reliability of SMPS. MOSFETs are used as low-voltage switches to regulate the DC voltage in SMPS. The studies have shown that die-attach degradation leads to an increase in on-state resistance due to its dependence on junction temperature. On-state resistance is the key indicator of the health of MOSFETs. In this paper, an online real-time method is presented for predicting the degradation of MOSFETs. First, the relationship between an oscillator signal of source and on-state resistance is introduced. Because oscillator signals change when they age, a feature is proposed to capture these changes and use them as indicators of the state of health of MOSFETs. A platform for testing characterizations is then established to monitor oscillator signals of source. Changes in oscillator signal measurement were observed with aged on-state resistance as a result of die-attach degradation. The experimental results demonstrate that the method is efficient. This study will enable a method to predict the failure of MOSFETs to be developed.

  17. Clawpack: building an open source ecosystem for solving hyperbolic PDEs

    KAUST Repository

    Mandli, Kyle T.

    2016-08-08

    Clawpack is a software package designed to solve nonlinear hyperbolic partial differential equations using high-resolution finite volume methods based on Riemann solvers and limiters. The package includes a number of variants aimed at different applications and user communities. Clawpack has been actively developed as an open source project for over 20 years. The latest major release, Clawpack 5, introduces a number of new features and changes to the code base and a new development model based on GitHub and Git submodules. This article provides a summary of the most significant changes, the rationale behind some of these changes, and a description of our current development model.

  18. Open-source Software for Exoplanet Atmospheric Modeling

    Science.gov (United States)

    Cubillos, Patricio; Blecic, Jasmina; Harrington, Joseph

    2018-01-01

    I will present a suite of self-standing open-source tools to model and retrieve exoplanet spectra implemented for Python. These include: (1) a Bayesian-statistical package to run Levenberg-Marquardt optimization and Markov-chain Monte Carlo posterior sampling, (2) a package to compress line-transition data from HITRAN or Exomol without loss of information, (3) a package to compute partition functions for HITRAN molecules, (4) a package to compute collision-induced absorption, and (5) a package to produce radiative-transfer spectra of transit and eclipse exoplanet observations and atmospheric retrievals.

  19. Gadgetron: An Open Source Framework for Medical Image Reconstruction

    DEFF Research Database (Denmark)

    Hansen, Michael Schacht; Sørensen, Thomas Sangild

    2013-01-01

    This work presents a new open source framework for medical image reconstruction called the “Gadgetron.” The framework implements a flexible system for creating streaming data processing pipelines where data pass through a series of modules or “Gadgets” from raw data to reconstructed images...... with a set of dedicated toolboxes in shared libraries for medical image reconstruction. This includes generic toolboxes for data-parallel (e.g., GPU-based) execution of compute-intensive components. The basic framework architecture is independent of medical imaging modality, but this article focuses on its...

  20. A Stigmergy Approach for Open Source Software Developer Community Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Xiaohui [ORNL; Beaver, Justin M [ORNL; Potok, Thomas E [ORNL; Pullum, Laura L [ORNL; Treadwell, Jim N [ORNL

    2009-01-01

    The stigmergy collaboration approach provides a hypothesized explanation about how online groups work together. In this research, we presented a stigmergy approach for building an agent based open source software (OSS) developer community collaboration simulation. We used group of actors who collaborate on OSS projects as our frame of reference and investigated how the choices actors make in contribution their work on the projects determinate the global status of the whole OSS projects. In our simulation, the forum posts and project codes served as the digital pheromone and the modified Pierre-Paul Grasse pheromone model is used for computing developer agent behaviors selection probability.

  1. Clawpack: building an open source ecosystem for solving hyperbolic PDEs

    KAUST Repository

    Mandli, Kyle T.; Ahmadia, Aron J.; Berger, Marsha; Calhoun, Donna; George, David L.; Hadjimichael, Yiannis; Ketcheson, David I.; Lemoine, Grady I.; LeVeque, Randall J.

    2016-01-01

    Clawpack is a software package designed to solve nonlinear hyperbolic partial differential equations using high-resolution finite volume methods based on Riemann solvers and limiters. The package includes a number of variants aimed at different applications and user communities. Clawpack has been actively developed as an open source project for over 20 years. The latest major release, Clawpack 5, introduces a number of new features and changes to the code base and a new development model based on GitHub and Git submodules. This article provides a summary of the most significant changes, the rationale behind some of these changes, and a description of our current development model.

  2. OPEN SOURCE ARCHITECTURE PER LA CITTÀ METROPOLITANA DI REGGIO CALABRIA

    Directory of Open Access Journals (Sweden)

    Gabriele Di Quarto

    2014-12-01

    Full Text Available The paper presents the role of the new Open Source technologies to encourage participation in the processes of incorporation of metropolitan cities established by the Italian legal system by Law 56 of 7 April 2014. Highlighted how technological innovation can provide useful tools to fill the competitive gap resulting from the physical conformation of the territory and from the delays in infrastructure of the future metropolitan city of Reggio Calabria. And is finally presented the experimental project of neighborhood of Archi CEP in Reggio Calabria.

  3. An open-source java platform for automated reaction mapping.

    Science.gov (United States)

    Crabtree, John D; Mehta, Dinesh P; Kouri, Tina M

    2010-09-27

    This article presents software applications that have been built upon a modular, open-source, reaction mapping library that can be used in both cheminformatics and bioinformatics research. We first describe the theoretical underpinnings and modular architecture of the core software library. We then describe two applications that have been built upon that core. The first is a generic reaction viewer and mapper, and the second classifies reactions according to rules that can be modified by end users with little or no programming skills.

  4. Review on open source operating systems for internet of things

    Science.gov (United States)

    Wang, Zhengmin; Li, Wei; Dong, Huiliang

    2017-08-01

    Internet of Things (IoT) is an environment in which everywhere and every device became smart in a smart world. Internet of Things is growing vastly; it is an integrated system of uniquely identifiable communicating devices which exchange information in a connected network to provide extensive services. IoT devices have very limited memory, computational power, and power supply. Traditional operating systems (OS) have no way to meet the needs of IoT systems. In this paper, we thus analyze the challenges of IoT OS and survey applicable open source OSs.

  5. Open-source sensors system for doing simple physics experiments

    Directory of Open Access Journals (Sweden)

    César Llamas Bello

    2018-04-01

    Full Text Available An open-source platform to be used in high school or university laboratories has been developed. The platform permits the performance of dynamics experiments in a simple and affordable way, combining measurements of different sensors in the platform. The sensors are controlled by an Arduino microcontroller, which can be wirelessly accessed with smartphones or tablets. The platform constitutes an economical sensing alternative to commercial configurations and can easily be extended by including new sensors that broaden the range of covered experiments.

  6. Integrating HCI Specialists into Open Source Software Development Projects

    Science.gov (United States)

    Hedberg, Henrik; Iivari, Netta

    Typical open source software (OSS) development projects are organized around technically talented developers, whose communication is based on technical aspects and source code. Decision-making power is gained through proven competence and activity in the project, and non-technical end-user opinions are too many times neglected. In addition, also human-computer interaction (HCI) specialists have encountered difficulties in trying to participate in OSS projects, because there seems to be no clear authority and responsibility for them. In this paper, based on HCI and OSS literature, we introduce an extended OSS development project organization model that adds a new level of communication and roles for attending human aspects of software. The proposed model makes the existence of HCI specialists visible in the projects, and promotes interaction between developers and the HCI specialists in the course of a project.

  7. Nurturing reliable and robust open-source scientific software

    Science.gov (United States)

    Uieda, L.; Wessel, P.

    2017-12-01

    Scientific results are increasingly the product of software. The reproducibility and validity of published results cannot be ensured without access to the source code of the software used to produce them. Therefore, the code itself is a fundamental part of the methodology and must be published along with the results. With such a reliance on software, it is troubling that most scientists do not receive formal training in software development. Tools such as version control, continuous integration, and automated testing are routinely used in industry to ensure the correctness and robustness of software. However, many scientist do not even know of their existence (although efforts like Software Carpentry are having an impact on this issue; software-carpentry.org). Publishing the source code is only the first step in creating an open-source project. For a project to grow it must provide documentation, participation guidelines, and a welcoming environment for new contributors. Expanding the project community is often more challenging than the technical aspects of software development. Maintainers must invest time to enforce the rules of the project and to onboard new members, which can be difficult to justify in the context of the "publish or perish" mentality. This problem will continue as long as software contributions are not recognized as valid scholarship by hiring and tenure committees. Furthermore, there are still unsolved problems in providing attribution for software contributions. Many journals and metrics of academic productivity do not recognize citations to sources other than traditional publications. Thus, some authors choose to publish an article about the software and use it as a citation marker. One issue with this approach is that updating the reference to include new contributors involves writing and publishing a new article. A better approach would be to cite a permanent archive of individual versions of the source code in services such as Zenodo

  8. An Enterprise Perspective on Customer Value Propositions for Open Source Software

    Directory of Open Access Journals (Sweden)

    Aparna Shanker

    2012-12-01

    Full Text Available Research on open source software (OSS has examined value creation primarily from the perspective of the individuals and suppliers that create the software. The perspective of enterprise users who use and pay for OSS has been largely neglected so far. Understanding what paying customers want and how to create products and services they value is the cornerstone of any business model. Therefore, research on what enterprise users value in OSS is of paramount importance to OSS solution suppliers; it can be used to create a new customer base and sustain an existing one. This study examines the value of OSS as perceived by enterprise customers. Through an analysis of three literature streams (firm participation in open source software, business models, and customer value, a model on customer value creation was developed. Interviews were conducted with nine decision makers from enterprises that use OSS in operational projects. The key findings of this research are that: i the maturity of the software determines the degree to which customers value their relationship with the supplier; ii customers value differentiating functionality and costs savings; and iii switching costs with OSS depend on the size, complexity, and dependencies of the software itself. This research identifies the points of value that the suppliers of OSS should focus on, and it points to the need for marketing strategies that can demonstrate this value to enterprise customers.

  9. How to use Open Source Software for Manage a Library System

    OpenAIRE

    Sumithchandra, Pandula

    2009-01-01

    Open source is an approach to the design, development, and distribution of software, offering practical accessibility to a software's source code. Some consider open source as one of various possible design approaches, while others consider it a critical strategic element of their operations. Before open source became widely adopted, developers and producers used a variety of phrases to describe the concept; the term open source gained popularity with the rise of the Internet, which provided ...

  10. Digital time stamping system based on open source technologies.

    Science.gov (United States)

    Miskinis, Rimantas; Smirnov, Dmitrij; Urba, Emilis; Burokas, Andrius; Malysko, Bogdan; Laud, Peeter; Zuliani, Francesco

    2010-03-01

    A digital time stamping system based on open source technologies (LINUX-UBUNTU, OpenTSA, OpenSSL, MySQL) is described in detail, including all important testing results. The system, called BALTICTIME, was developed under a project sponsored by the European Commission under the Program FP 6. It was designed to meet the requirements posed to the systems of legal and accountable time stamping and to be applicable to the hardware commonly used by the national time metrology laboratories. The BALTICTIME system is intended for the use of governmental and other institutions as well as personal bodies. Testing results demonstrate that the time stamps issued to the user by BALTICTIME and saved in BALTICTIME's archives (which implies that the time stamps are accountable) meet all the regulatory requirements. Moreover, the BALTICTIME in its present implementation is able to issue more than 10 digital time stamps per second. The system can be enhanced if needed. The test version of the BALTICTIME service is free and available at http://baltictime. pfi.lt:8080/btws/ and http://baltictime.lnmc.lv:8080/btws/.

  11. Pricing the (European) option to switch between two energy sources: An application to crude oil and natural gas

    International Nuclear Information System (INIS)

    Gatfaoui, Hayette

    2015-01-01

    We consider a firm, which can choose between crude oil and natural gas to run its business. The firm selects the energy source, which minimizes its energy or production costs at a given time horizon. Assuming the energy strategy to be established over a fixed time window, the energy choice decision will be made at a given future date T. In this light, the firm's energy cost can be considered as a long position in a risk-free bond by an amount of the terminal oil price, and a short position in a European put option to switch from oil to gas by an amount of the terminal oil price too. As a result, the option to switch from crude oil to natural gas allows for establishing a hedging strategy with respect to energy costs. Modeling stochastically the underlying asset of the European put, we propose a valuation formula of the option to switch and calibrate the pricing formula to empirical data on a daily basis. Hence, our innovative framework handles widely the hedge against the price increase of any given energy source versus the price of another competing energy source (i.e. minimizing energy costs). Moreover, we provide a price for the cost-reducing effect of the capability to switch from one energy source to another one (i.e. hedging energy price risk). - Highlights: • We consider a firm, which chooses either crude oil or natural gas as an energy source. • The capability to switch offers the firm a hedge against energy commodity price risk. • A European put option prices the ability to switch from crude oil to natural gas. • The capability to switch between two energy sources reduces the firm's energy costs. • The discount illustrates the efficiency of the energy management policy (e.g. timing).

  12. Open Source, Crowd Source: Harnessing the Power of the People behind Our Libraries

    Science.gov (United States)

    Trainor, Cindi

    2009-01-01

    Purpose: The purpose of this paper is to provide an insight into the use of Web 2.0 and Library 2.0 technologies so that librarians can combine open source software with user-generated content to create a richer discovery experience for their users. Design/methodology/approach: Following a description of the current state of integrated library…

  13. Open Sourcing Social Change: Inside the Constellation Model

    Directory of Open Access Journals (Sweden)

    Tonya Surman

    2008-09-01

    Full Text Available The constellation model was developed by and for the Canadian Partnership for Children's Health and the Environment. The model offers an innovative approach to organizing collaborative efforts in the social mission sector and shares various elements of the open source model. It emphasizes self-organizing and concrete action within a network of partner organizations working on a common issue. Constellations are self-organizing action teams that operate within the broader strategic vision of a partnership. These constellations are outwardly focused, placing their attention on creating value for those in the external environment rather than on the partnership itself. While serious effort is invested into core partnership governance and management, most of the energy is devoted to the decision making, resources and collaborative effort required to create social value. The constellations drive and define the partnership. The constellation model emerged from a deep understanding of the power of networks and peer production. Leadership rotates fluidly amongst partners, with each partner having the freedom to head up a constellation and to participate in constellations that carry out activities that are of more peripheral interest. The Internet provided the platform, the partner network enabled the expertise to align itself, and the goal of reducing chemical exposure in children kept the energy flowing. Building on seven years of experience, this article provides an overview of the constellation model, discusses the results from the CPCHE, and identifies similarities and differences between the constellation and open source models.

  14. Eucalyptus: an open-source cloud computing infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Nurmi, Daniel; Wolski, Rich; Grzegorczyk, Chris; Obertelli, Graziano; Soman, Sunil; Youseff, Lamia; Zagorodnov, Dmitrii, E-mail: rich@cs.ucsb.ed [Computer Science Department, University of California, Santa Barbara, CA 93106 (United States) and Eucalyptus Systems Inc., 130 Castilian Dr., Goleta, CA 93117 (United States)

    2009-07-01

    Utility computing, elastic computing, and cloud computing are all terms that refer to the concept of dynamically provisioning processing time and storage space from a ubiquitous 'cloud' of computational resources. Such systems allow users to acquire and release the resources on demand and provide ready access to data from processing elements, while relegating the physical location and exact parameters of the resources. Over the past few years, such systems have become increasingly popular, but nearly all current cloud computing offerings are either proprietary or depend upon software infrastructure that is invisible to the research community. In this work, we present Eucalyptus, an open-source software implementation of cloud computing that utilizes compute resources that are typically available to researchers, such as clusters and workstation farms. In order to foster community research exploration of cloud computing systems, the design of Eucalyptus emphasizes modularity, allowing researchers to experiment with their own security, scalability, scheduling, and interface implementations. In this paper, we outline the design of Eucalyptus, describe our own implementations of the modular system components, and provide results from experiments that measure performance and scalability of a Eucalyptus installation currently deployed for public use. The main contribution of our work is the presentation of the first research-oriented open-source cloud computing system focused on enabling methodical investigations into the programming, administration, and deployment of systems exploring this novel distributed computing model.

  15. Eucalyptus: an open-source cloud computing infrastructure

    International Nuclear Information System (INIS)

    Nurmi, Daniel; Wolski, Rich; Grzegorczyk, Chris; Obertelli, Graziano; Soman, Sunil; Youseff, Lamia; Zagorodnov, Dmitrii

    2009-01-01

    Utility computing, elastic computing, and cloud computing are all terms that refer to the concept of dynamically provisioning processing time and storage space from a ubiquitous 'cloud' of computational resources. Such systems allow users to acquire and release the resources on demand and provide ready access to data from processing elements, while relegating the physical location and exact parameters of the resources. Over the past few years, such systems have become increasingly popular, but nearly all current cloud computing offerings are either proprietary or depend upon software infrastructure that is invisible to the research community. In this work, we present Eucalyptus, an open-source software implementation of cloud computing that utilizes compute resources that are typically available to researchers, such as clusters and workstation farms. In order to foster community research exploration of cloud computing systems, the design of Eucalyptus emphasizes modularity, allowing researchers to experiment with their own security, scalability, scheduling, and interface implementations. In this paper, we outline the design of Eucalyptus, describe our own implementations of the modular system components, and provide results from experiments that measure performance and scalability of a Eucalyptus installation currently deployed for public use. The main contribution of our work is the presentation of the first research-oriented open-source cloud computing system focused on enabling methodical investigations into the programming, administration, and deployment of systems exploring this novel distributed computing model.

  16. Robust, open-source removal of systematics in Kepler data

    Science.gov (United States)

    Aigrain, S.; Parviainen, H.; Roberts, S.; Reece, S.; Evans, T.

    2017-10-01

    We present ARC2 (Astrophysically Robust Correction 2), an open-source python-based systematics-correction pipeline, to correct for the Kepler prime mission long-cadence light curves. The ARC2 pipeline identifies and corrects any isolated discontinuities in the light curves and then removes trends common to many light curves. These trends are modelled using the publicly available co-trending basis vectors, within an (approximate) Bayesian framework with 'shrinkage' priors to minimize the risk of overfitting and the injection of any additional noise into the corrected light curves, while keeping any astrophysical signals intact. We show that the ARC2 pipeline's performance matches that of the standard Kepler PDC-MAP data products using standard noise metrics, and demonstrate its ability to preserve astrophysical signals using injection tests with simulated stellar rotation and planetary transit signals. Although it is not identical, the ARC2 pipeline can thus be used as an open-source alternative to PDC-MAP, whenever the ability to model the impact of the systematics removal process on other kinds of signal is important.

  17. Building integrated business environments: analysing open-source ESB

    Science.gov (United States)

    Martínez-Carreras, M. A.; García Jimenez, F. J.; Gómez Skarmeta, A. F.

    2015-05-01

    Integration and interoperability are two concepts that have gained significant prominence in the business field, providing tools which enable enterprise application integration (EAI). In this sense, enterprise service bus (ESB) has played a crucial role as the underpinning technology for creating integrated environments in which companies may connect all their legacy-applications. However, the potential of these technologies remains unknown and some important features are not used to develop suitable business environments. The aim of this paper is to describe and detail the elements for building the next generation of integrated business environments (IBE) and to analyse the features of ESBs as the core of this infrastructure. For this purpose, we evaluate how well-known open-source ESB products fulfil these needs. Moreover, we introduce a scenario in which the collaborative system 'Alfresco' is integrated in the business infrastructure. Finally, we provide a comparison of the different open-source ESBs available for IBE requirements. According to this study, Fuse ESB provides the best results, considering features such as support for a wide variety of standards and specifications, documentation and implementation, security, advanced business trends, ease of integration and performance.

  18. Comparative Analysis Study of Open Source GIS in Malaysia

    International Nuclear Information System (INIS)

    Rasid, Muhammad Zamir Abdul; Kamis, Naddia; Halim, Mohd Khuizham Abd

    2014-01-01

    Open source origin might appear like a major prospective change which is qualified to deliver in various industries and also competing means in developing countries. The leading purpose of this research study is to basically discover the degree of adopting Open Source Software (OSS) that is connected with Geographic Information System (GIS) application within Malaysia. It was derived based on inadequate awareness with regards to the origin ideas or even on account of techie deficiencies in the open origin instruments. This particular research has been carried out based on two significant stages; the first stage involved a survey questionnaire: to evaluate the awareness and acceptance level based on the comparison feedback regarding OSS and commercial GIS. This particular survey was conducted among three groups of candidates: government servant, university students and lecturers, as well as individual. The approaches of measuring awareness in this research were based on a comprehending signal plus a notion signal for each survey questions. These kinds of signs had been designed throughout the analysis in order to supply a measurable and also a descriptive signal to produce the final result. The second stage involved an interview session with a major organization that carries out available origin internet GIS; the Federal Department of Town and Country Planning Peninsular Malaysia (JPBD). The impact of this preliminary study was to understand the particular viewpoint of different groups of people on the available origin, and also their insufficient awareness with regards to origin ideas as well as likelihood may be significant root of adopting level connected with available origin options

  19. Combining Open-Source Packages for Planetary Exploration

    Science.gov (United States)

    Schmidt, Albrecht; Grieger, Björn; Völk, Stefan

    2015-04-01

    The science planning of the ESA Rosetta mission has presented challenges which were addressed with combining various open-source software packages, such as the SPICE toolkit, the Python language and the Web graphics library three.js. The challenge was to compute certain parameters from a pool of trajectories and (possible) attitudes to describe the behaviour of the spacecraft. To be able to do this declaratively and efficiently, a C library was implemented that allows to interface the SPICE toolkit for geometrical computations from the Python language and process as much data as possible during one subroutine call. To minimise the lines of code one has to write special care was taken to ensure that the bindings were idiomatic and thus integrate well into the Python language and ecosystem. When done well, this very much simplifies the structure of the code and facilitates the testing for correctness by automatic test suites and visual inspections. For rapid visualisation and confirmation of correctness of results, the geometries were visualised with the three.js library, a popular Javascript library for displaying three-dimensional graphics in a Web browser. Programmatically, this was achieved by generating data files from SPICE sources that were included into templated HTML and displayed by a browser, thus made easily accessible to interested parties at large. As feedback came and new ideas were to be explored, the authors benefited greatly from the design of the Python-to-SPICE library which allowed the expression of algorithms to be concise and easier to communicate. In summary, by combining several well-established open-source tools, we were able to put together a flexible computation and visualisation environment that helped communicate and build confidence in planning ideas.

  20. GRASS GIS: The first Open Source Temporal GIS

    Science.gov (United States)

    Gebbert, Sören; Leppelt, Thomas

    2015-04-01

    GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

  1. Why develop open-source software? The role of non-pecuniary benefits, monetary rewards, and open-source licence type

    OpenAIRE

    Robert M. Sauer

    2007-01-01

    A review of the basic theory of optimal open-source software contributions points to three key factors affecting the decision to contribute to the open-source development process: nonpecuniary benefits, future expected monetary returns, and open-source licence type. This paper argues that existing large-scale software developer surveys are inadequate for measuring the relative importance of these three factors. Previous econometric studies that collect their own unique datasets also fall shor...

  2. An Enhanced Three-Level Voltage Switching State Scheme for Direct Torque Controlled Open End Winding Induction Motor

    Science.gov (United States)

    Kunisetti, V. Praveen Kumar; Thippiripati, Vinay Kumar

    2018-01-01

    Open End Winding Induction Motors (OEWIM) are popular for electric vehicles, ship propulsion applications due to less DC link voltage. Electric vehicles, ship propulsions require ripple free torque. In this article, an enhanced three-level voltage switching state scheme for direct torque controlled OEWIM drive is implemented to reduce torque and flux ripples. The limitations of conventional Direct Torque Control (DTC) are: possible problems during low speeds and starting, it operates with variable switching frequency due to hysteresis controllers and produces higher torque and flux ripple. The proposed DTC scheme can abate the problems of conventional DTC with an enhanced voltage switching state scheme. The three-level inversion was obtained by operating inverters with equal DC-link voltages and it produces 18 voltage space vectors. These 18 vectors are divided into low and high frequencies of operation based on rotor speed. The hardware results prove the validity of proposed DTC scheme during steady-state and transients. From simulation and experimental results, proposed DTC scheme gives less torque and flux ripples on comparison to two-level DTC. The proposed DTC is implemented using dSPACE DS-1104 control board interface with MATLAB/SIMULINK-RTI model.

  3. Plasma density evolution in plasma opening switch obtained by a time-resolved sensitive He-Ne interferometer

    Science.gov (United States)

    Chen, Lin; Ren, Jing; Guo, Fan; Zhou, LiangJi; Li, Ye; He, An; Jiang, Wei

    2014-03-01

    To understand the formation process of vacuum gap in coaxial microsecond conduction time plasma opening switch (POS), we have made measurements of the line-integrated plasma density during switch operation using a time-resolved sensitive He-Ne interferometer. The conduction current and conduction time in experiments are about 120 kA and 1 μs, respectively. As a result, more than 85% of conduction current has been transferred to an inductive load with rise time of 130 ns. The radial dependence of the density is measured by changing the radial location of the line-of-sight for shots with the same nominal POS parameters. During the conduction phase, the line-integrated plasma density in POS increases at all radial locations over the gun-only case by further ionization of material injected from the guns. The current conduction is observed to cause a radial redistribution of the switch plasma. A vacuum gap forms rapidly in the plasma at 5.5 mm from the center conductor, which is consistent with the location where magnetic pressure is the largest, allowing current to be transferred from the POS to the load.

  4. Sharing Lessons-Learned on Effective Open Data, Open-Source Practices from OpenAQ, a Global Open Air Quality Community.

    Science.gov (United States)

    Hasenkopf, C. A.

    2017-12-01

    Increasingly, open data, open-source projects are unearthing rich datasets and tools, previously impossible for more traditional avenues to generate. These projects are possible, in part, because of the emergence of online collaborative and code-sharing tools, decreasing costs of cloud-based services to fetch, store, and serve data, and increasing interest of individuals to contribute their time and skills to 'open projects.' While such projects have generated palpable enthusiasm from many sectors, many of these projects face uncharted paths for sustainability, visibility, and acceptance. Our project, OpenAQ, is an example of an open-source, open data community that is currently forging its own uncharted path. OpenAQ is an open air quality data platform that aggregates and universally formats government and research-grade air quality data from 50 countries across the world. To date, we make available more than 76 million air quality (PM2.5, PM10, SO2, NO2, O3, CO and black carbon) data points through an open Application Programming Interface (API) and a user-customizable download interface at https://openaq.org. The goal of the platform is to enable an ecosystem of users to advance air pollution efforts from science to policy to the private sector. The platform is also an open-source project (https://github.com/openaq) and has only been made possible through the coding and data contributions of individuals around the world. In our first two years of existence, we have seen requests for data to our API skyrocket to more than 6 million datapoints per month, and use-cases as varied as ingesting data aggregated from our system into real-time models of wildfires to building open-source statistical packages (e.g. ropenaq and py-openaq) on top of the platform to creating public-friendly apps and chatbots. We will share a whirl-wind trip through our evolution and the many lessons learned so far related to platform structure, community engagement, organizational model type

  5. An Extensible Open-Source Compiler Infrastructure for Testing

    Energy Technology Data Exchange (ETDEWEB)

    Quinlan, D; Ur, S; Vuduc, R

    2005-12-09

    Testing forms a critical part of the development process for large-scale software, and there is growing need for automated tools that can read, represent, analyze, and transform the application's source code to help carry out testing tasks. However, the support required to compile applications written in common general purpose languages is generally inaccessible to the testing research community. In this paper, we report on an extensible, open-source compiler infrastructure called ROSE, which is currently in development at Lawrence Livermore National Laboratory. ROSE specifically targets developers who wish to build source-based tools that implement customized analyses and optimizations for large-scale C, C++, and Fortran90 scientific computing applications (on the order of a million lines of code or more). However, much of this infrastructure can also be used to address problems in testing, and ROSE is by design broadly accessible to those without a formal compiler background. This paper details the interactions between testing of applications and the ways in which compiler technology can aid in the understanding of those applications. We emphasize the particular aspects of ROSE, such as support for the general analysis of whole programs, that are particularly well-suited to the testing research community and the scale of the problems that community solves.

  6. ACToR Chemical Structure processing using Open Source ...

    Science.gov (United States)

    ACToR (Aggregated Computational Toxicology Resource) is a centralized database repository developed by the National Center for Computational Toxicology (NCCT) at the U.S. Environmental Protection Agency (EPA). Free and open source tools were used to compile toxicity data from over 1,950 public sources. ACToR contains chemical structure information and toxicological data for over 558,000 unique chemicals. The database primarily includes data from NCCT research programs, in vivo toxicity data from ToxRef, human exposure data from ExpoCast, high-throughput screening data from ToxCast and high quality chemical structure information from the EPA DSSTox program. The DSSTox database is a chemical structure inventory for the NCCT programs and currently has about 16,000 unique structures. Included are also data from PubChem, ChemSpider, USDA, FDA, NIH and several other public data sources. ACToR has been a resource to various international and national research groups. Most of our recent efforts on ACToR are focused on improving the structural identifiers and Physico-Chemical properties of the chemicals in the database. Organizing this huge collection of data and improving the chemical structure quality of the database has posed some major challenges. Workflows have been developed to process structures, calculate chemical properties and identify relationships between CAS numbers. The Structure processing workflow integrates web services (PubChem and NIH NCI Cactus) to d

  7. An open source device for operant licking in rats.

    Science.gov (United States)

    Longley, Matthew; Willis, Ethan L; Tay, Cindy X; Chen, Hao

    2017-01-01

    We created an easy-to-use device for operant licking experiments and another device that records environmental variables. Both devices use the Raspberry Pi computer to obtain data from multiple input devices (e.g., radio frequency identification tag readers, touch and motion sensors, environmental sensors) and activate output devices (e.g., LED lights, syringe pumps) as needed. Data gathered from these devices are stored locally on the computer but can be automatically transferred to a remote server via a wireless network. We tested the operant device by training rats to obtain either sucrose or water under the control of a fixed ratio, a variable ratio, or a progressive ratio reinforcement schedule. The lick data demonstrated that the device has sufficient precision and time resolution to record the fast licking behavior of rats. Data from the environment monitoring device also showed reliable measurements. By providing the source code and 3D design under an open source license, we believe these examples will stimulate innovation in behavioral studies. The source code can be found at http://github.com/chen42/openbehavior.

  8. Improving Data Catalogs with Free and Open Source Software

    Science.gov (United States)

    Schweitzer, R.; Hankin, S.; O'Brien, K.

    2013-12-01

    The Global Earth Observation Integrated Data Environment (GEO-IDE) is NOAA's effort to successfully integrate data and information with partners in the national US-Global Earth Observation System (US-GEO) and the international Global Earth Observation System of Systems (GEOSS). As part of the GEO-IDE, the Unified Access Framework (UAF) is working to build momentum towards the goal of increased data integration and interoperability. The UAF project is moving towards this goal with an approach that includes leveraging well known and widely used standards, as well as free and open source software. The UAF project shares the widely held conviction that the use of data standards is a key ingredient necessary to achieve interoperability. Many community-based consensus standards fail, though, due to poor compliance. Compliance problems emerge for many reasons: because the standards evolve through versions, because documentation is ambiguous or because individual data providers find the standard inadequate as-is to meet their special needs. In addition, minimalist use of standards will lead to a compliant service, but one which is of low quality. In this presentation, we will be discussing the UAF effort to build a catalog cleaning tool which is designed to crawl THREDDS catalogs, analyze the data available, and then build a 'clean' catalog of data which is standards compliant and has a uniform set of data access services available. These data services include, among others, OPeNDAP, Web Coverage Service (WCS) and Web Mapping Service (WMS). We will also discuss how we are utilizing free and open source software and services to both crawl, analyze and build the clean data catalog, as well as our efforts to help data providers improve their data catalogs. We'll discuss the use of open source software such as DataNucleus, Thematic Realtime Environmental Distributed Data Services (THREDDS), ncISO and the netCDF Java Common Data Model (CDM). We'll also demonstrate how we are

  9. Open source GIS for HIV/AIDS management

    Directory of Open Access Journals (Sweden)

    Ricketts Adam

    2008-10-01

    Full Text Available Abstract Background Reliable access to basic services can improve a community's resilience to HIV/AIDS. Accordingly, work is being done to upgrade the physical infrastructure in affected areas, often employing a strategy of decentralised service provision. Spatial characteristics are one of the major determinants in implementing services, even in the smaller municipal areas, and good quality spatial information is needed to inform decision making processes. However, limited funds, technical infrastructure and human resource capacity result in little or no access to spatial information for crucial infrastructure development decisions at local level. This research investigated whether it would be possible to develop a GIS for basic infrastructure planning and management at local level. Given the resource constraints of the local government context, particularly in small municipalities, it was decided that open source software should be used for the prototype system. Results The design and development of a prototype system illustrated that it is possible to develop an open source GIS system that can be used within the context of local information management. Usability tests show a high degree of usability for the system, which is important considering the heavy workload and high staff turnover that characterises local government in South Africa. Local infrastructure management stakeholders interviewed in a case study of a South African municipality see the potential for the use of GIS as a communication tool and are generally positive about the use of GIS for these purposes. They note security issues that may arise through the sharing of information, lack of skills and resource constraints as the major barriers to adoption. Conclusion The case study shows that spatial information is an identified need at local level. Open source GIS software can be used to develop a system to provide local-level stakeholders with spatial information. However, the

  10. Q&A. Does lack of product management impact the users of open source?

    OpenAIRE

    Paul Young

    2008-01-01

    Most commercial software companies employ product managers to handle the planning and marketing of software products, whereas few open source projects have a product manager. Does lack of product management impact the users of open source?

  11. Workshop for Open Source Universal Picture Archiving and Communication Systems (PACS)

    National Research Council Canada - National Science Library

    Tohme, Walid G

    2006-01-01

    .... The "Open Source Universal PACS Archive" workshop focused on current challenges of and open source solutions to the management of images and other clinical information in multi-center settings...

  12. Q&A. Does lack of product management impact the users of open source?

    Directory of Open Access Journals (Sweden)

    Paul Young

    2008-05-01

    Full Text Available Most commercial software companies employ product managers to handle the planning and marketing of software products, whereas few open source projects have a product manager. Does lack of product management impact the users of open source?

  13. The potential role of open source software in overcoming digital poverty

    CSIR Research Space (South Africa)

    Kinyondo, J

    2012-09-01

    Full Text Available literature analysis, document analysis as well as observations of open source community activities were conducted to identify the ICT acceptance challenges and to formulate questions for a survey instrument and for interviews. Four open source communities...

  14. An extended dual input dual output three level Z source inverter with improved switch loss reduction technique

    Directory of Open Access Journals (Sweden)

    N.B. Deshmukh

    2016-12-01

    Full Text Available Multilevel inverter (MLI is a proven technology used for industrial applications due to low output total harmonic distortion (THD, high power handling capability and low active device rating. Dual output inverter is a recent trend associated with inverter topologies for specialized applications. This paper deals with three phase three level dual input dual output inverter topology with minimum active device count. Reduction in switch count leads to reduction in losses and improves reliability. Both the input sources share power equally as neutral point current ripple is maintained low. For further reduction in switching losses at higher switching frequencies, the concept of “no switching zone” or discontinuous pulse width modulation (DPWM has been put forth recently. This paper proposes modification in the placement of “no switching zone” in order to optimize switching losses and output THD (output filtering requirements for low power factor load. This study also proposes novel graphical approach to analyze the loss reduction along with its effect on output THD. The sinusoidal PWM (SPWM is used which gives satisfactory switching loss reduction without complex calculations. Moreover, the proposed topology is generalized to provide dual output at higher voltage levels. It is seen that the components reduction phenomenon becomes more pronounced as number of levels goes on increasing. The proposed converter is simulated in MATLAB software environment and results are obtained.

  15. SCR series switch and impulse crowbar at the Lawrence Berkeley Laboratory for CTR neutral beam source development

    International Nuclear Information System (INIS)

    Franck, J.V.; Arthur, A.A.; Brusse, L.A.; Low, W.

    1977-10-01

    The series switch is designed to operate at 120kV and pass 65A for 0.5 sec every 30 sec on the Lawrence Berkeley Laboratory CTR Neutral Beam Source Test Stand IIIB. The series switch consists of 400 individual SCR circuits connected in series and is turned on by a simple system of cascaded pulse transformers with multiple single turn secondaries each driving the individual SCR gates. It is turned off by an SCR impulse crowbar that momentarily shorts the power supply allowing the series switch to recover. The SCR switch has been tested in the impulse crowbar configuration and will reliably commutate up to 90A at 120kV. The series switch and impulse crowbar are now in service in Test Stand IIIB. A series switch and impulse crowbar similar in concept is routinely powering a 10 x 10 cm source at 150kV, 20A, 0.5 sec with a 1% duty cycle on the Lawrence Berkeley Laboratory CTR NSB Test Stand IIIA

  16. Spatial Dmbs Architecture for a Free and Open Source Bim

    Science.gov (United States)

    Logothetis, S.; Valari, E.; Karachaliou, E.; Stylianidis, E.

    2017-08-01

    Recent research on the field of Building Information Modelling (BIM) technology, revealed that except of a few, accessible and free BIM viewers there is a lack of Free & Open Source Software (FOSS) BIM software for the complete BIM process. With this in mind and considering BIM as the technological advancement of Computer-Aided Design (CAD) systems, the current work proposes the use of a FOSS CAD software in order to extend its capabilities and transform it gradually into a FOSS BIM platform. Towards this undertaking, a first approach on developing a spatial Database Management System (DBMS) able to store, organize and manage the overall amount of information within a single application, is presented.

  17. Challenges of the Open Source Component Marketplace in the Industry

    Science.gov (United States)

    Ayala, Claudia; Hauge, Øyvind; Conradi, Reidar; Franch, Xavier; Li, Jingyue; Velle, Ketil Sandanger

    The reuse of Open Source Software components available on the Internet is playing a major role in the development of Component Based Software Systems. Nevertheless, the special nature of the OSS marketplace has taken the “classical” concept of software reuse based on centralized repositories to a completely different arena based on massive reuse over Internet. In this paper we provide an overview of the actual state of the OSS marketplace, and report preliminary findings about how companies interact with this marketplace to reuse OSS components. Such data was gathered from interviews in software companies in Spain and Norway. Based on these results we identify some challenges aimed to improve the industrial reuse of OSS components.

  18. Open Source GIS Connectors to NASA GES DISC Satellite Data

    Science.gov (United States)

    Kempler, Steve; Pham, Long; Yang, Wenli

    2014-01-01

    The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of high spatiotemporal resolution GIS data including satellite-derived and modeled precipitation, air quality, and land surface parameter data. The data are valuable to various GIS research and applications at regional, continental, and global scales. On the other hand, many GIS users, especially those from the ArcGIS community, have difficulties in obtaining, importing, and using our data due to factors such as the variety of data products, the complexity of satellite remote sensing data, and the data encoding formats. We introduce a simple open source ArcGIS data connector that significantly simplifies the access and use of GES DISC data in ArcGIS.

  19. Open source cardiology electronic health record development for DIGICARDIAC implementation

    Science.gov (United States)

    Dugarte, Nelson; Medina, Rubén.; Huiracocha, Lourdes; Rojas, Rubén.

    2015-12-01

    This article presents the development of a Cardiology Electronic Health Record (CEHR) system. Software consists of a structured algorithm designed under Health Level-7 (HL7) international standards. Novelty of the system is the integration of high resolution ECG (HRECG) signal acquisition and processing tools, patient information management tools and telecardiology tools. Acquisition tools are for management and control of the DIGICARDIAC electrocardiograph functions. Processing tools allow management of HRECG signal analysis searching for indicative patterns of cardiovascular pathologies. Telecardiology tools incorporation allows system communication with other health care centers decreasing access time to the patient information. CEHR system was completely developed using open source software. Preliminary results of process validation showed the system efficiency.

  20. EPICS IOC development on open source RTEMS RTOS

    International Nuclear Information System (INIS)

    Bharade, S.K.; Joshi, Gopal; Das, D.

    2015-01-01

    Modern control systems applications are often built on top of a real time operating system. At LEHIPA beamlines, open source control systems offer a modem solution for cost effectiveness and technical competence. The 'Experimental Physics and Industrial Control System' (EPICS) and the 'Real-Time Operating System for Multiprocessor Systems' (RTEMS) were chosen to develop the core control system. Presently, the EPICS/RTEMS/MVME5500 control system is implemented for RF Protection Interlock system and BPM. This paper shares an experience of building RTEMS for MVME5500, configuring and run EPICS for RTEMS-MVME5500 architecture. It further shows EPICS bench marking results using EPICS catime and hamesstest utilities for this architecture. (author)