Case Study: Online Continuing Education for New Librarians

Science.gov (United States)

Hendrix, Beth R.; McKeal, Alyse E.

2017-01-01

Continuing education is vital for new librarians to gain skills and knowledge beyond library school. Professional development offered free in an online environment is often the best option for staying current on the issues and trends necessary for young librarians to grow and flourish. This paper presents a case study of an online professional…

On-line in-situ measurements in the boundary layer: Manned hydrogen balloons as quasi Lagrange platforms

Energy Technology Data Exchange (ETDEWEB)

Rappengluck, B.; Fabian, P. [Ludwig-Maximilian Univ., Dept. of Bioclimatology and Emission Research, Munich (Germany); Euskirchen, J. [Inst. for Scientific Balloonflight e.V., Waidhofen (Germany)

1999-11-01

In-situ measurements of atmospheric trace constituents such as nitrogen dioxide, ozone, peroxy acetyl nitrate (PAN), and non-methane hydrocarbon compounds (NMHC) are essential parameters for understanding photochemical processes. This paper discusses some of the lessons learned and some of the results of a field measurement project dubbed BERLIOZ (for Berlin Ozone), carried out in July/August 1998 in the Greater Berlin Area to investigate several key questions concerning the evolution of photochemical smog within an urban plume, and the role of advection and turbulence for oxidants. A comprehensive network of ground-based measurement sites, vertical sounding techniques such as tethered balloons and laser-based radar, mobile stations for profile measurements, five aircraft and one manned free-balloon were used in the project. BERLIOZ was the first major atmospheric research project to use a hydrogen balloon platform for quasi-Lagrangian measurements. It confirmed the balloon`s suitability as a tool for better understanding of large area information gathered by remote sensing missions. 5 refs., 6 figs.

Online and Social Media Data As an Imperfect Continuous Panel Survey.

Science.gov (United States)

Diaz, Fernando; Gamon, Michael; Hofman, Jake M; Kıcıman, Emre; Rothschild, David

2016-01-01

There is a large body of research on utilizing online activity as a survey of political opinion to predict real world election outcomes. There is considerably less work, however, on using this data to understand topic-specific interest and opinion amongst the general population and specific demographic subgroups, as currently measured by relatively expensive surveys. Here we investigate this possibility by studying a full census of all Twitter activity during the 2012 election cycle along with the comprehensive search history of a large panel of Internet users during the same period, highlighting the challenges in interpreting online and social media activity as the results of a survey. As noted in existing work, the online population is a non-representative sample of the offline world (e.g., the U.S. voting population). We extend this work to show how demographic skew and user participation is non-stationary and difficult to predict over time. In addition, the nature of user contributions varies substantially around important events. Furthermore, we note subtle problems in mapping what people are sharing or consuming online to specific sentiment or opinion measures around a particular topic. We provide a framework, built around considering this data as an imperfect continuous panel survey, for addressing these issues so that meaningful insight about public interest and opinion can be reliably extracted from online and social media data.

Participation in online continuing education.

Science.gov (United States)

Farrell, Barbara; Ward, Natalie; Jennings, Brad; Jones, Caitlin; Jorgenson, Derek; Gubbels-Smith, Ashley; Dolovich, Lisa; Kennie, Natalie

2016-02-01

The ADAPT (ADapting pharmacists' skills and Approaches to maximize Patients' drug Therapy effectiveness) e-learning programme requires weekly participation in module activities and facilitated discussion to support skill uptake. In this study, we sought to describe the extent and pattern of, satisfaction with and factors affecting participation in the initial programme offering and reasons for withdrawal. Mixed methods - convergent parallel approach. Participation was examined in qualitative data from discussion boards, assignments and action plans. Learner estimations of time commitment and action plan submission rates were calculated. Surveys (Likert scale and open-ended questions) included mid-point and final, exit and participation surveys. Eleven of 86 learners withdrew, most due to time constraints (eight completed an exit survey; seven said they would take ADAPT again). Thirty-five of 75 remaining learners completed a participation survey. Although 50-60% of the remaining 75 learners actively continued participating, only 15/35 respondents felt satisfied with their own participation. Learners spent 3-5 h/week (average) on module activities. Factors challenging participation included difficulty with technology, managing time and group work. Factors facilitating participation included willingness to learn (content of high interest) and supportive work environment. Being informed of programme time scheduling in advance was identified as a way to enhance participation. This study determined extent of learner participation in an online pharmacist continuing education programme and identified factors influencing participation. Interactions between learners and the online interface, content and with other learners are important considerations for designing online education programmes. Recommendations for programme changes were incorporated following this evaluation to facilitate participation. © 2015 Royal Pharmaceutical Society.

A urinary incontinence continuing education online course for community health nurses in South Korea.

Science.gov (United States)

De Gagne, Jennie C; Park, Sunah; So, Aeyoung; Wu, Bei; Palmer, Mary H; McConnell, Eleanor S

2015-04-01

Although urinary incontinence is prevalent among older women living in rural Korea, a lack of awareness and education exists in this population and among health professionals. Geographic isolation and limited resources also contribute to having few educational offerings for rural nurses. The authors' aim was to develop an online continuing education course on continence care for community health nurses and to examine its effectiveness. A one-group, pretest-posttest design was used to detect changes in knowledge and attitudes after taking the online education course. Participant satisfaction was also measured at the end of the training. A significant improvement in knowledge and attitudes toward continence care was noted. More than 95% of participants responded that they would recommend the online program to other health care providers and indicated the program would be helpful regarding continence care in their practice. The continuing education online course is a feasible strategy to support rural community health nurses' learning to improve knowledge and attitudes toward urinary incontinence management and care. Copyright 2015, SLACK Incorporated.

Quantum continual measurements and a posteriori collapse on CCR

International Nuclear Information System (INIS)

Belavkin, V.P.

1992-01-01

A quantum stochastic model for the Markovian dynamics of an open system under the nondemolition unsharp observation which is continuous in time, is given. A stochastic equation for the posterior evolution of a quantum continuously observed system is derived and the spontaneous collapse (stochastically continuous reduction of the wave packet) is described. The quantum Langevin evolution equation is solved for the case of a quasi-free Hamiltonian in the initial CCR algebra with a linear output channel, and the posterior dynamics corresponding to an initial Gaussian state is found. It is shown for an example of the posterior dynamics of a quantum oscillator that any mixed state under a complete nondemolition measurement collapses exponentially to a pure Gaussian one. (orig.)

Students Matter: Quality Measurements in Online Courses

Science.gov (United States)

Unal, Zafer; Unal, Aslihan

2016-01-01

Quality Matters (QM) is a peer review process designed to certify the quality of online courses and online components. It has generated widespread interest and received national recognition for its peer-based approach to quality assurance and continuous improvement in online education. While the entire QM online course design process is…

Measurement of Online Student Engagement: Utilization of Continuous Online Student Behavior Indicators as Items in a Partial Credit Rasch Model

Science.gov (United States)

Anderson, Elizabeth

2017-01-01

Student engagement has been shown to be essential to the development of research-based best practices for K-12 education. It has been defined and measured in numerous ways. The purpose of this research study was to develop a measure of online student engagement for grades 3 through 8 using a partial credit Rasch model and validate the measure…

An online survey of chiropractors' opinions of continuing education

Directory of Open Access Journals (Sweden)

Smith Dean L

2005-10-01

Full Text Available Abstract Background Continuing Education (CE for chiropractors is mandatory for licensure in most North American jurisdictions. Numerous chiropractic colleges have begun collaborating with universities to offer master's degree programs. Distance education master's degree programs may be desirable to allow full-time practicing doctors to further their post-graduate education. The present survey sought to answer three questions. First, what is the level of satisfaction of chiropractors with their continuing education? Second, what is the level of interest of chiropractors in online master's degree programs? Lastly, what is the response rate of chiropractors to an online survey? Methods An online survey consisting of 22 multiple choice questions was e-mailed to 1000 chiropractors randomly selected from the mailing list of an online chiropractic newsletter. Upon completion of the questionnaire, participants' answers were saved on a secure site. Data analysis included evaluation of the demographic characteristics of the respondents, their opinions of and patterns of taking CE including online education, preferred learning formats, and their interest in proposed online master's degree programs. A survey response rate was determined. Results Nearly 86% of respondents felt their previously completed CE courses were either somewhat or extremely satisfactory. Over ninety percent of respondents who had completed online or distance CE coursesfound them to be somewhat or extremelysatisfactory. Almost half the respondents indicated that they most preferred online distance learning, while 34.08% most preferred face-to-face interaction. Fifty-three percent of respondents indicated an interest in starting a master's degree program; however 70.46% of respondents were interested in an online master's degree program that would offer CE credit. A response rate of 35.8% was obtained. Conclusion Satisfaction among chiropractors with CE programs is high. The notion of

An improved technique for quasi-static C-V measurements

International Nuclear Information System (INIS)

Turan, R.; Finstad, T.G.

1990-10-01

A new automated quasi-static C-V measurement technique for MOS capacitors has been developed. This techniques uses an integrating electrometer to measure the charge accumulated on a MOS capacitor in response of a small voltage step. Making use of the internal data storage system of a commercial electrometer and a personal computer, the charge Q on the MOS capacitor is measured as a function of time t and stored. The capacitance is then obtained by analyzing this Q-t data set. A Si MOS sample is measured and analyzed in terms of interface charges as an example. Advantages over a commercial quasi-static meter which uses similar measurement technique are presented. It is also shown that this technique is potentially capable of measuring both high and low frequency C-V curves simultaneously. 9 refs. 5 figs

Online and unsupervised face recognition for continuous video stream

Science.gov (United States)

Huo, Hongwen; Feng, Jufu

2009-10-01

We present a novel online face recognition approach for video stream in this paper. Our method includes two stages: pre-training and online training. In the pre-training phase, our method observes interactions, collects batches of input data, and attempts to estimate their distributions (Box-Cox transformation is adopted here to normalize rough estimates). In the online training phase, our method incrementally improves classifiers' knowledge of the face space and updates it continuously with incremental eigenspace analysis. The performance achieved by our method shows its great potential in video stream processing.

Some Comments on Quasi-Birth-and-Death Processes and Matrix Measures

Directory of Open Access Journals (Sweden)

Holger Dette

2010-01-01

Full Text Available We explore the relation between matrix measures and quasi-birth-and-death processes. We derive an integral representation of the transition function in terms of a matrix-valued spectral measure and corresponding orthogonal matrix polynomials. We characterize several stochastic properties of quasi-birth-and-death processes by means of this matrixmeasure and illustrate the theoretical results by several examples.

Quasi-periodic Schroedinger operators in one dimension, absolutely continuous spectra, Bloch waves, and integrable Hamiltonian systems

International Nuclear Information System (INIS)

Chierchia, L.

1986-01-01

In the first chapter, the eigenvalue problem for a periodic Schroedinger operator, Lf = (-d 2 /dx 2 + v)f = Ef, is viewed as a two-dimensional Hamiltonian system which is integrable in the sense of Arnold and Liouville. With the aid of the Floquet-BLoch theory, it is shown that such a system is conjugate to two harmonic oscillators with frequencies α and omega, being the rotation number for L and 2π/omega the period of the potential v. This picture is generalized in the second chapter, to quasi periodic Schroedinger operators, L/sub epsilon/, with highly irrational frequencies (omega 1 , ..., omega/sub d/), which are a small perturbation of periodic operators. In the last chapter, the absolutely continuous spectrum σ/sub ac/ of a general quasi-periodic Schroedinger operators is considered. The Radon-Nikodym derivatives (with respect to Lebesgue measure) of the spectral measures are computed in terms of special independent eigensolutions existing for almost ever E in σ/sub ac/. Finally, it is shown that weak Bloch waves always exist for almost ever E in σ/sub ac/ and the question of the existence of genuine Bloch waves is turned into a regularity problem for a certain nonlinear partial differential equation on a d-dimensional torus

Quasi interpolation with Voronoi splines.

Science.gov (United States)

Mirzargar, Mahsa; Entezari, Alireza

2011-12-01

We present a quasi interpolation framework that attains the optimal approximation-order of Voronoi splines for reconstruction of volumetric data sampled on general lattices. The quasi interpolation framework of Voronoi splines provides an unbiased reconstruction method across various lattices. Therefore this framework allows us to analyze and contrast the sampling-theoretic performance of general lattices, using signal reconstruction, in an unbiased manner. Our quasi interpolation methodology is implemented as an efficient FIR filter that can be applied online or as a preprocessing step. We present visual and numerical experiments that demonstrate the improved accuracy of reconstruction across lattices, using the quasi interpolation framework. © 2011 IEEE

On-line stable isotope measurements during plant and soil gas exchange

International Nuclear Information System (INIS)

Yakir, D.

2001-01-01

Recent techniques for on-line stable isotope measurements during plant and soil exchange of CO 2 and/or water vapor are briefly reviewed. For CO 2 , these techniques provide means for on-line measurements of isotopic discrimination during CO 2 exchange by leaves in the laboratory and in the field, of isotopic discrimination during soil respiration and during soil-atmosphere CO 2 exchange, and of isotopic discrimination in O 2 during plant respiration. For water vapor, these techniques provide means to measure oxygen isotopic composition of water vapor during leaf transpiration and for the analysis of sub microliter condensed water vapor samples. Most of these techniques involve on-line sampling of CO 2 and water vapor from a dynamic, intact soil or plant system. In the laboratory, these systems also allow on-line isotopic analysis by continuous-flow isotope ratio mass spectrometry. The information obtained with these on-line techniques is becoming increasingly valuable, and often critical, for ecophysiologial research and in the study of biosphere-atmosphere interactions. (author)

The roles of constraint-based and dedication-based influences on user's continued online shopping behavior.

Science.gov (United States)

Chang, Su-Chao; Chou, Chi-Min

2012-11-01

The objective of this study was to determine empirically the role of constraint-based and dedication-based influences as drivers of the intention to continue using online shopping websites. Constraint-based influences consist of two variables: trust and perceived switching costs. Dedication-based influences consist of three variables: satisfaction, perceived usefulness, and trust. The current results indicate that both constraint-based and dedication-based influences are important drivers of the intention to continue using online shopping websites. The data also shows that trust has the strongest total effect on online shoppers' intention to continue using online shopping websites. In addition, the results indicate that the antecedents of constraint-based influences, technical bonds (e.g., perceived operational competence and perceived website interactivity) and social bonds (e.g., perceived relationship investment, community building, and intimacy) have indirect positive effects on the intention to continue using online shopping websites. Based on these findings, this research suggests that online shopping websites should build constraint-based and dedication-based influences to enhance user's continued online shopping behaviors simultaneously.

One Continuous Auditing Practice in China: Data-oriented Online Auditing(DOOA)

Science.gov (United States)

Chen, Wei; Zhang, Jin-Cheng; Jiang, Yu-Quan

Application of information technologies (IT) in the field of audit is worth studying. Continuous auditing (CA) is an active research domain in computer-assisted audit field. In this paper, the concept of continuous auditing is analyzed firstly. Then, based on analysis on research literatures of continuous auditing, technique realization methods are classified into embedded mode and separate mode. According to the condition of implementing online auditing in China, data-oriented online auditing (DOOA) used in China is also one of separate mode of continuous auditing. And the principle of DOOA is analyzed. Furthermore, the advantages and disadvantages of DOOA are also discussed. Finally, advices to implement DOOA in China are given, and the future research topics related to continuous auditing are also discussed.

Continued Use of a Chinese Online Portal: An Empirical Study

Science.gov (United States)

Shih, Hung-Pin

2008-01-01

The evolution of the internet has made online portals a popular means of surfing the internet. In internet commerce, understanding the post-adoption behaviour of users of online portals can help enterprises to attract new users and retain existing customers. For predicting continued use intentions, this empirical study focused on applying and…

Collaboration and critical thinking in an online chemistry environment

Science.gov (United States)

Kershisnik, Elizabeth Irene

The purpose of this dissertation was to examine collaboration and student's critical thinking and cognitive achievement within online chemistry courses. This quantitative study focused on the apparent lack of research relating collaboration and critical thinking in online science courses. Collaboration was determined using the small group collaboration model coding scheme, which examined student postings in asynchronous discussion forums for quantity, equality, and shareness. Critical thinking was measured using the chemistry concept reasoning test, the online self-diagnostic test, and also asynchronous student homework discussion postings that were coded using the community of inquiry cognitive presence indicators. Finally cognitive achievement was determined using quiz scores and the student's final grade. Even though no significant findings were revealed in this exploratory quasi-experimental study, this research did add to the educational technology knowledge base since very few studies have investigated the chemistry discipline in an online environment. Continued research in this area is vital to understanding how critical thinking progresses, how it can be assessed, and what factors in the classroom, be it virtual or face-to-face, have the greatest effect on critical thinking.

Why people continue to play online games: in search of critical design factors to increase customer loyalty to online contents.

Science.gov (United States)

Choi, Dongseong; Kim, Jinwoo

2004-02-01

As people increasingly play online games, numerous new features have been proposed to increase players' log-on time at online gaming sites. However, few studies have investigated why people continue to play certain online games or which design features are most closely related to the amount of time spent by players at particular online gaming sites. This study proposes a theoretical model using the concepts of customer loyalty, flow, personal interaction, and social interaction to explain why people continue to play online network games. The study then conducts a large-scale survey to validate the model. Finally, it analyzes current online games to identify design features that are closely related to the theoretical concepts. The results indicate that people continue to play online games if they have optimal experiences while playing the games. This optimal experience can be attained if the player has effective personal interaction with the system or pleasant social interactions with other people connected to the Internet. Personal interaction can be facilitated by providing appropriate goals, operators and feedback; social interaction can be facilitated through appropriate communication places and tools. This paper ends with the implications of applying the study results to other domains such as e-commerce and cyber communities.

USING ONLINE MARKETING TO INCREASE PARTICIPATION IN A WEB-BASED CONTINUING MEDICAL EDUCATION CULTURAL COMPETENCE CURRICULUM

Science.gov (United States)

Estrada, Carlos A.; Krishnamoorthy, Periyakaruppan; Smith, Ann; Staton, Lisa; Korf, Michele J.; Allison, Jeroan J.; Houston, Thomas K.

2012-01-01

Introduction CME providers may be interested in identifying effective marketing strategies to direct users to specific content. The use of online advertisements to recruit participants for clinical trials, public health programs, and Continuing Medical Education (CME) has been shown to be effective in some but not all studies. The purpose of this study was to compare the impact of two marketing strategies in the context of an online CME cultural competence curriculum (www.c-comp.org). Methods In an interrupted time-series quasi-experimental design, two marketing strategies were tested: a) wide dissemination to relevant organizations over a period of approximately four months, and b) Internet paid search using Google Ads (five consecutive eight-week periods--control 1, cultural/ CME advertisement, control 2, hypertension/ content advertisement, control 3). Outcome measures were CME credit requests, Web traffic (visits per day, page views, pages viewed per visit), and cost. Results Overall, the site was visited 19,156 times and 78,160 pages were viewed. During the wide dissemination phase, the proportion of visits requesting CME credit decreased between the first (5.3%) and second halves (3.3%) of this phase (p= .04). During the Internet paid search phase, the proportion of visits requesting CME credit was highest during the cultural/ CME advertisement period (control 1, 1.4%; cultural/CME ad, 4.3%; control 2, 1.5%; hypertension/content ad, 0.6%; control 3, 0.8%; p<.001). All measures of Web traffic changed during the Internet paid search phase (p<.01); however, changes were independent of the advertisement periods. The incremental cost for the cultural advertisement per CME credit requested was $0.64US. Discussion Internet advertisement focusing on cultural competence and CME was associated with about a three-fold increase in requests for CME credit at an incremental cost of under $1; however, Web traffic changes were independent of the advertisement strategy. PMID

Quasi-continuous transition from a Fermi liquid to a spin liquid in κ-(ET)2Cu2(CN)3.

Science.gov (United States)

Furukawa, Tetsuya; Kobashi, Kazuhiko; Kurosaki, Yosuke; Miyagawa, Kazuya; Kanoda, Kazushi

2018-01-22

The Mott metal-insulator transition-a manifestation of Coulomb interactions among electrons-is known as a discontinuous transition. Recent theoretical studies, however, suggest that the transition is continuous if the Mott insulator carries a spin liquid with a spinon Fermi surface. Here, we demonstrate the case of a quasi-continuous Mott transition from a Fermi liquid to a spin liquid in an organic triangular-lattice system κ-(ET) 2 Cu 2 (CN) 3 . Transport experiments performed under fine pressure tuning have found that as the Mott transition is approached, the Fermi liquid coherence temperature continuously falls to the scale of kelvins, with a divergent quasi-particle decay rate on the metal side, and the charge gap continuously closes on the insulator side. A Clausius-Clapeyron analysis provides thermodynamic evidence for the extremely weak first-order nature of the transition. These results provide additional support for the existence of a spinon Fermi surface, which becomes an electron Fermi surface when charges are delocalized.

The Measurement of the Quasi-Elastic Neutrino-Nucleon Scattering Cross Section at the Tevatron

Energy Technology Data Exchange (ETDEWEB)

Suwonjandee, Narumon [Cincinnati U.

2004-01-01

The quasi-elastic neutrino nucleon cross section measurement has been measured in the low energy region less than 100 Ge V. The data agree well with the model proposed by C. H. Llewellyn Smith. This model predicts that the quasi-elastic cross section should be constant in the high enery region. The NuTeV experiment at Fermilab provides data which allows us to measure the quasi-elastic cross section for both neutrinos and anti-neutrinos at high energy. We find that $\\sigma^{Neucleon}_{qe}(v) = 0.94 \\pm 0.03(stat.) \\pm 0.07(syst.)$, and $\\sigma^{Neucleon}_{qe}(\\bar\

An apparatus for on-line measuring of the coating weight on art paper

International Nuclear Information System (INIS)

Huang Meifen; Mao Shunjuan

1986-01-01

The method and apparatus for on-line measuring of the coating weight on art paper are described. The design of the coating gauge was based on the technique of charcateristic X-ray fluorescence preferential absorption. The gauge was equipped with a TP-801 micro-computer which makes the gauge capable of showing and typing the data in different forms. The measurement is quick, continuous, accurate and non-destructive. Analysis period is 10 seconds. In on-line measuring, the reproducibility is +- 1 g/m 2 and the relative error of this method amounts to +- 5% with the weighing method as a standard

Online luminosity measurement at BES III

International Nuclear Information System (INIS)

Song Wenbo; Fu Chengdong; Mo Xiaohu; He Kanglin; Zhu Kejun; Li Fei; Zhao Shujun

2010-01-01

As a crucial parameter of both accelerator and detector, the realization of online luminosity measurement is of great importance. Several methods of luminosity measurement are recapitulated and the emphasis is laid on the algorithm of using e + e - and γγ final states. Taking into account the status at the beginning of the joint commissioning of detector and accelerator, the information from end cap electromagnetic calorimeter is used to select the good event. With the help of online Event filter, the luminosity is calculated and the monitoring of online cross section of hadron is realized. The preliminary results indicate that the online luminosity measurement is stable and its role for machine tuning and monitoring of the overall running status is indispensable. (authors)

Quasi-continuous wave and continuous wave laser operation of Eu:KGd(WO4)2 crystal on a 5D0 → 7F4 transition

International Nuclear Information System (INIS)

Dashkevich, V I; Orlovich, V A; Bui, A A; Bagayev, S N; Vatnik, S M; Loiko, P A; Yumashev, K V; Kuleshov, N V; Pavlyuk, A A

2015-01-01

We report on the first demonstration of quasi-continuous wave (quasi-CW) and real CW room-temperature lasing on the 5 D 0  →  7 F 4 transition of Eu 3+ -doped material using a 25 at.%Eu 3+  : KGd(WO 4 ) 2 crystal pumped into the 7 F 1  →  5 D 1 transition by a diode-end-pumped Nd 3+  : KGd(WO 4 ) 2 /KTP green laser at 533.6 nm. The maximum CW output power of this laser at 702.3 nm is 5.3 mW with 1.4% green-to-red conversion efficiency. In quasi-CW operation mode with a 10% duty cycle, the peak power of ms long pulses reaches ∼54 mW, which corresponds to the optical conversion efficiency of 3.5%. (letter)

Continuing education: online monitoring of haemodialysis dose.

Science.gov (United States)

Vartia, Aarne

2018-01-25

Kt/V urea reflects the efficacy of haemodialysis scaled to patient size (urea distribution volume). The guidelines recommend monthly Kt/V measurements based on blood samples. Modern haemodialysis machines are equipped with accessories monitoring the dose online at every session without extra costs, blood samples and computers. To describe the principles, devices, benefits and shortcomings of online monitoring of haemodialysis dose. A critical literature overview and discussion. UV absorbance methods measure Kt/V, ionic dialysance Kt (product of clearance and treatment time; cleared volume without scaling). Both are easy and useful methods, but comparison is difficult due to problems in scaling of the dialysis dose to the patient's size. The best dose estimation method is the one which predicts the quality of life and survival most accurately. There is some evidence on the predictive value of ionic dialysance Kt, but more documentation is required on the UV method. Online monitoring is a useful tool in everyday quality assurance, but blood samples are still required for more accurate kinetic modelling. After reading this article the reader should be able to: Understand the elements of the Kt/V equation for dialysis dose. Compare and contrast different methods of measurement of dialysis dose. Reflect on the importance of adequate dialysis dose for patient survival and life quality. © 2018 European Dialysis and Transplant Nurses Association/European Renal Care Association.

Quasi-elastic measurements using neutron spin flippers

International Nuclear Information System (INIS)

Bleuel, M.; Fitzsimmons, M.R.; Lal, J.

2008-01-01

A method for low-resolution quasi-elastic measurements using commonly available components on a polarized neutron beam reflectometer is demonstrated. By amplitude modulation of the current in a neutron spin flipper placed between the neutron beam polarizer and polarization analyzer, the intensity of the neutron beam illuminating a sample is similarly modulated (or chopped). We show that the intensity contrast between subsequent chopped pulses is dramatically reduced by a sample that changes neutron velocity

Continuous determination of volatile products in anaerobic fermenters by on-line capillary gas chromatography

International Nuclear Information System (INIS)

Diamantis, V.; Melidis, P.; Aivasidis, A.

2006-01-01

Bio-ethanol and biogas produced during the anaerobic conversion of organic compounds has been a subject of great interest since the oil crisis of the 1970s. In ethanol fermentation and anaerobic treatment of wastewaters, end-product (ethanol) and intermediate-products (short-chain fatty acids, SCFA) cause inhibition that results in reduced process efficiency. Control of these constituents is of utmost importance for bioreactor optimization and process stability. Ethanol and SCFA can be detected with precision by capillary gas chromatography usually conducted in off-line measurements. In this work, an on-line monitoring and controlling system was developed and connected to the fermenter via an auto-sampling equipment, which could perform the feeding, filtration and dilution of the sample and final injection into the gas chromatograph through an automation-based programmed procedure. The sample was continuously pumped from the recycle stream of the bioreactor and treated using a microfiltration unit. The concentrate was returned to the reactor while the permeate was quantitatively mixed with an internal standard solution. The system comprised of a gas chromatograph with the flow cell and one-shot sampler and a PC with the appropriate software. The on-line measurement of ethanol and SCFA, directly from the liquid phase of an ethanol fermenter and a high-rate continuous mode anaerobic digester, was accomplished by gas chromatography. Also, this monitoring and controlling system was proved to be effective in the continuous fermentation of alcohol-free beer

Teaching renewable energy using online PBL in investigating its effect on behaviour towards energy conservation among Malaysian students: ANOVA repeated measures approach

Science.gov (United States)

Nordin, Norfarah; Samsudin, Mohd Ali; Hadi Harun, Abdul

2017-01-01

This research aimed to investigate whether online problem based learning (PBL) approach to teach renewable energy topic improves students’ behaviour towards energy conservation. A renewable energy online problem based learning (REePBaL) instruction package was developed based on the theory of constructivism and adaptation of the online learning model. This study employed a single group quasi-experimental design to ascertain the changed in students’ behaviour towards energy conservation after underwent the intervention. The study involved 48 secondary school students in a Malaysian public school. ANOVA Repeated Measure technique was employed in order to compare scores of students’ behaviour towards energy conservation before and after the intervention. Based on the finding, students’ behaviour towards energy conservation improved after the intervention.

0.4 mJ quasi-continuously pumped picosecond Nd:GdVO4 laser with selectable pulse duration

International Nuclear Information System (INIS)

Kubeček, V; Jelínek, M; Čech, M; Hiršl, P; Diels, J-C

2010-01-01

A quasi-continuously pumped picosecond oscillator-amplifier Nd:GdVO 4 laser system based on two identical slabs in a single bounce geometry is reported. Pulse duration is from 160 to 55 ps resulting from the pulse shortening along the extended mode locked train from passively mode locked oscillator, which was measured directly from a single laser shot. The shortest 55 ps long cavity dumped single pulses from the oscillator with the energy of 15±1 μJ and the contrast better than 10 -3 were amplified to the energy of 150 μJ with the contrast better than 10 -3 after the single-pass amplification and to the energy of 400 μJ after the double-pass amplification

On P-Adic Quasi Gibbs Measures for Q + 1-State Potts Model on the Cayley Tree

International Nuclear Information System (INIS)

Mukhamedov, Farrukh

2010-06-01

In the present paper we introduce a new class of p-adic measures, associated with q +1-state Potts model, called p-adic quasi Gibbs measure, which is totally different from the p-adic Gibbs measure. We establish the existence p-adic quasi Gibbs measures for the model on a Cayley tree. If q is divisible by p, then we prove the occurrence of a strong phase transition. If q and p are relatively prime, then there is a quasi phase transition. These results are totally different from the results of [F.M.Mukhamedov, U.A. Rozikov, Indag. Math. N.S. 15(2005) 85-100], since q is divisible by p, which means that q + 1 is not divided by p, so according to a main result of the mentioned paper, there is a unique and bounded p-adic Gibbs measure (different from p-adic quasi Gibbs measure). (author)

ϕ-statistically quasi Cauchy sequences

Directory of Open Access Journals (Sweden)

Bipan Hazarika

2016-04-01

Full Text Available Let P denote the space whose elements are finite sets of distinct positive integers. Given any element σ of P, we denote by p(σ the sequence {pn(σ} such that pn(σ=1 for n ∈ σ and pn(σ=0 otherwise. Further Ps={σ∈P:∑n=1∞pn(σ≤s}, i.e. Ps is the set of those σ whose support has cardinality at most s. Let (ϕn be a non-decreasing sequence of positive integers such that nϕn+1≤(n+1ϕn for all n∈N and the class of all sequences (ϕn is denoted by Φ. Let E⊆N. The number δϕ(E=lims→∞1ϕs|{k∈σ,σ∈Ps:k∈E}| is said to be the ϕ-density of E. A sequence (xn of points in R is ϕ-statistically convergent (or Sϕ-convergent to a real number ℓ for every ε > 0 if the set {n∈N:|xn−ℓ|≥ɛ} has ϕ-density zero. We introduce ϕ-statistically ward continuity of a real function. A real function is ϕ-statistically ward continuous if it preserves ϕ-statistically quasi Cauchy sequences where a sequence (xn is called to be ϕ-statistically quasi Cauchy (or Sϕ-quasi Cauchy when (Δxn=(xn+1−xn is ϕ-statistically convergent to 0. i.e. a sequence (xn of points in R is called ϕ-statistically quasi Cauchy (or Sϕ-quasi Cauchy for every ε > 0 if {n∈N:|xn+1−xn|≥ɛ} has ϕ-density zero. Also we introduce the concept of ϕ-statistically ward compactness and obtain results related to ϕ-statistically ward continuity, ϕ-statistically ward compactness, statistically ward continuity, ward continuity, ward compactness, ordinary compactness, uniform continuity, ordinary continuity, δ-ward continuity, and slowly oscillating continuity.

Cross-section measurement for quasi-elastic production of charmed baryons in $\

CERN Document Server

Kayis-Topaksu, A; Van Dantzig, R; De Jong, M; Melzer, O; Oldeman, R G C; Pesen, E; Spada, F R; Visschers, J L; Güler, M; Köse, U; Serin-Zeyrek, M; Sever, R; Tolun, P; Zeyrek, M T; Catanesi, M G; De Serio, M; Ieva, M; Muciaccia, M T; Radicioni, E; Simone, S; Bülte, A; Winter, Klaus; Van de Vyver, B; Vilain, P; Wilquet, G; Pittoni, G L; Saitta, B; Di Capua, E; Ogawa, S; Shibuya, H; Artamonov, A V; Chizhov, M; Doucet, M; Hristova, I R; Kawamura, T; Kolev, D; Meinhard, H; Panman, J; Papadopoulos, I M; Ricciardi, S; Rozanov, A; Tsenov, R V; Uiterwijk, J W E; Zucchelli, P; Goldberg, J; Chikawa, M; Arik, E; Song, J S; Yoon, C S; Kodama, K; Ushida, N; Aoki, S; Hara, T; Delbar, T; Favart, D; Grégoire, G; Kalinin, S; Makhlyoueva, I V; Gorbunov, P; Khovanskii, V D; Shamanov, V V; Tsukerman, I; Bruski, N; Frekers, D; Hoshino, K; Kawada, J; Komatsu, M; Miyanishi, M; Nakamura, M; Nakano, T; Narita, K; Niu, K; Niwa, K; Nonaka, N; Sato, O; Toshito, T; Buontempo, S; Cocco, A G; D'Ambrosio, N; De Lellis, G; De Rosa, G; Di Capua, F; Ereditato, A; Fiorillo, G; Marotta, A; Messina, M; Migliozzi, P; Pistillo, C; Scotto-Lavina, L; Strolin, P; Tioukov, V; Nakamura, K; Okusawa, T; Dore, U; Loverre, P F; Ludovici, L; Righini, P; Rosa, G; Santacesaria, R; Satta, A; Barbuto, E; Bozza, C; Grella, G; Romano, G; Sirignano, C; Sorrentino, S; Sato, Y; Tezuka, I

2003-01-01

A study of quasi-elastic production of charmed baryons in charged-current interactions of neutrinos with the nuclear emulsion target of CHORUS is presented. In a sample of about 46000 interactions located in the emulsion, candidates for decays of short-lived particles were identified by using new automatic scanning systems and later confirmed through visual inspection. Criteria based both on topologival and kinematical characteristics of quasi-elastic charm production allowed a clear separation between events of this type and those in which charm is produced in deep inelastic processes. A final sample containing 13 candidates consistent with quasi-elastic production of a charmed baryon with an estimated background of 1.7 events was obtained. At the average neutrino energy of 27GeV the cross section for total quasi-elastic production of charmed baryons relative to the nuN charged-current cross-section was measured to be sigma(QE)/sigma(CC)=(0.23^+0.12_-0.06(stat)^+0.02_-0.03(syst))x10^-2. Through an analysis o...

Quasi-experimental study designs series-paper 13: realizing the full potential of quasi-experiments for health research.

Science.gov (United States)

Rockers, Peter C; Tugwell, Peter; Røttingen, John-Arne; Bärnighausen, Till

2017-09-01

Although the number of quasi-experiments conducted by health researchers has increased in recent years, there clearly remains unrealized potential for using these methods for causal evaluation of health policies and programs globally. This article proposes five prescriptions for capturing the full value of quasi-experiments for health research. First, new funding opportunities targeting proposals that use quasi-experimental methods should be made available to a broad pool of health researchers. Second, administrative data from health programs, often amenable to quasi-experimental analysis, should be made more accessible to researchers. Third, training in quasi-experimental methods should be integrated into existing health science graduate programs to increase global capacity to use these methods. Fourth, clear guidelines for primary research and synthesis of evidence from quasi-experiments should be developed. Fifth, strategic investments should be made to continue to develop new innovations in quasi-experimental methodologies. Tremendous opportunities exist to expand the use of quasi-experimental methods to increase our understanding of which health programs and policies work and which do not. Health researchers should continue to expand their commitment to rigorous causal evaluation with quasi-experimental methods, and international institutions should increase their support for these efforts. Copyright © 2017 Elsevier Inc. All rights reserved.

Patient Continued Use of Online Health Care Communities: Web Mining of Patient-Doctor Communication.

Science.gov (United States)

Wu, Bing

2018-04-16

In practice, online health communities have passed the adoption stage and reached the diffusion phase of development. In this phase, patients equipped with knowledge regarding the issues involved in health care are capable of switching between different communities to maximize their online health community activities. Online health communities employ doctors to answer patient questions, and high quality online health communities are more likely to be acknowledged by patients. Therefore, the factors that motivate patients to maintain ongoing relationships with online health communities must be addressed. However, this has received limited scholarly attention. The purpose of this study was to identify the factors that drive patients to continue their use of online health communities where doctor-patient communication occurs. This was achieved by integrating the information system success model with online health community features. A Web spider was used to download and extract data from one of the most authoritative Chinese online health communities in which communication occurs between doctors and patients. The time span analyzed in this study was from January 2017 to March 2017. A sample of 469 valid anonymous patients with 9667 posts was obtained (the equivalent of 469 respondents in survey research). A combination of Web mining and structural equation modeling was then conducted to test the research hypotheses. The results show that the research framework for integrating the information system success model and online health community features contributes to our understanding of the factors that drive patients' relationships with online health communities. The primary findings are as follows: (1) perceived usefulness is found to be significantly determined by three exogenous variables (ie, social support, information quality, and service quality; R 2 =0.88). These variables explain 87.6% of the variance in perceived usefulness of online health communities; (2

Continuos Online Auditing Dan Continuous Assurance : Evolusi Jasa Audit Masa Mendatang

OpenAIRE

Ariston; Handoko, Jesica

2006-01-01

The advent of computer has affected numerous aspects of accounting and auditing. Computerassisted auditing has became commonplace, leading to a significant increase in efficiency of auditing (Kogan dkk., 1999). This improvements enabled management and reporting (internal and external) of finer information sets at progressively narrower time frames. This article describes continuous online auditing and continuous assurance as emerging future audit services evolution. They have three impo...

Online Labour Index: Measuring the Online Gig Economy for Policy and Research

OpenAIRE

Kässi, Otto; Lehdonvirta, Vili

2016-01-01

Labour markets are thought to be in the midst of a dramatic transformation, where standard employment is increasingly supplemented or substituted by temporary gig work mediated by online platforms. Yet the scale and scope of these changes is hard to assess, because conventional labour market statistics and economic indicators are ill-suited to measuring online gig work. We present the Online Labour Index (OLI), a new economic indicator that provides the online gig economy equivalent of conven...

A nuclear on-line sensor for continuous control of vanadium content in oil pipelines

International Nuclear Information System (INIS)

Rizk, R.A.M.

1989-01-01

Trace amounts of vanadium in crude oil and in heavy distillate fuels are very harmful due to their corrosive action. Thus the necessity arises for continuous control of the vanadium content in oil pipelines. Moreover, the development of a nuclear on-line sensor that can continuously analyze the vanadium content in oil pipelines may lead to a better control of processing operations. In this paper a feasibility study for on-line analysis of vanadium in crude oil by means of neutron activation analysis is presented. (author)

Measuring consumer perceptions of online shopping convenience

OpenAIRE

Ferreira, Margarida Bernardo

2016-01-01

The aim of this master thesis is to identify which dimensions of convenience affect consumers’ intention of using online shopping. Also it explores a conceptual model to measuring consumer perceptions of online shopping convenience. This paper contains prospects about online consumer behavior, and the results have important implications for retailers, managers and marketers, related to online shopping strategies. An empirical investigation was carried out to test the hypotheses. In order t...

Cross section measurements for quasi-elastic neutrino-nucleus scattering with the MINOS near detector

Energy Technology Data Exchange (ETDEWEB)

Dorman, Mark Edward [Univ. College London, Bloomsbury (United Kingdom)

2008-04-01

The Main Injector Neutrino Oscillation Search (MINOS) is a long baseline neutrino oscillation experiment based at the Fermi National Accelerator Laboratory (FNAL) in Chicago, Illinois. MINOS measures neutrino interactions in two large iron-scintillator tracking/sampling calorimeters; the Near Detector on-site at FNAL and the Far Detector located in the Soudan mine in northern Minnesota. The Near Detector has recorded a large number of neutrino interactions and this high statistics dataset can be used to make precision measurements of neutrino interaction cross sections. The cross section for charged-current quasi-elastic scattering has been measured by a number of previous experiments and these measurements disagree by up to 30%. A method to select a quasi-elastic enriched sample of neutrino interactions in the MINOS Near Detector is presented and a procedure to fit the kinematic distributions of this sample and extract the quasi-elastic cross section is introduced. The accuracy and robustness of the fitting procedure is studied using mock data and finally results from fits to the MINOS Near Detector data are presented.

Cross section measurements for quasi-elastic neutrino-nucleus scattering with the MINOS near detector

International Nuclear Information System (INIS)

Dorman, Mark Edward

2008-01-01

The Main Injector Neutrino Oscillation Search (MINOS) is a long baseline neutrino oscillation experiment based at the Fermi National Accelerator Laboratory (FNAL) in Chicago, Illinois. MINOS measures neutrino interactions in two large iron-scintillator tracking/sampling calorimeters; the Near Detector on-site at FNAL and the Far Detector located in the Soudan mine in northern Minnesota. The Near Detector has recorded a large number of neutrino interactions and this high statistics dataset can be used to make precision measurements of neutrino interaction cross sections. The cross section for charged-current quasi-elastic scattering has been measured by a number of previous experiments and these measurements disagree by up to 30%. A method to select a quasi-elastic enriched sample of neutrino interactions in the MINOS Near Detector is presented and a procedure to fit the kinematic distributions of this sample and extract the quasi-elastic cross section is introduced. The accuracy and robustness of the fitting procedure is studied using mock data and finally results from fits to the MINOS Near Detector data are presented

The Online Social Support Scale: Measure development and validation.

Science.gov (United States)

Nick, Elizabeth A; Cole, David A; Cho, Sun-Joo; Smith, Darcy K; Carter, T Grace; Zelkowitz, Rachel L

2018-05-21

A new measure, the Online Social Support Scale, was developed based on previous theory, research, and measurement of in-person social support. It includes four subscales: Esteem/Emotional Support, Social Companionship, Informational Support, and Instrumental Support. In college and community samples, factor analytic and item response theory results suggest that subtypes of in-person social support also pertain in the online world. Evidence of reliability, convergent validity, and discriminant validity provide excellent psychometric support for the measure. Construct validity accrues to the measure vis-à-vis support for three hypotheses: (a) Various broad types of Internet platforms for social interactions are differentially associated with online social support and online victimization; (b) similar to in-person social support, online social support offsets the adverse effect of negative life events on self-esteem and depression-related outcome; and (c) online social support counteracts the effects of online victimization in much the same way that in-person friends in one social niche counterbalance rejection in other social niches. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Online Course Increases Nutrition Professionals' Knowledge, Skills, and Self-Efficacy in Using an Ecological Approach to Prevent Childhood Obesity

Science.gov (United States)

Stark, Christina M.; Graham-Kiefer, Meredith L.; Devine, Carol M.; Dollahite, Jamie S.; Olson, Christine M.

2011-01-01

Objective: To assess the impact of an online continuing education course on the knowledge, skills, and self-efficacy of nutrition professionals to use an ecological approach to prevent childhood obesity. Design: Quasi-experimental design using intervention and delayed intervention comparison groups with pre/post-course assessments. Setting: Online…

A Test of the Validity of Projective and Quasi-Projective Measures of Interpersonal Distance.

Science.gov (United States)

Jones, Stanley E.; Aiello, John R.

1979-01-01

Discusses research supporting the conclusion that projective and quasi-projective measures of interpersonal distance do not measure the same phenomena as interactional measures. It is possible that they are more indicative of psychological rather than physical distance. (JMF)

A piezo-film-based measurement system for global haemodynamic assessment

International Nuclear Information System (INIS)

Clemente, Fabrizio; Cimmino, Pasquale; Arpaia, Pasquale

2010-01-01

A non-invasive piezo-film-based measurement method for haemodynamic assessment is proposed. The design of a system, able to reconstruct the blood pressure waveform online by dealing with problems arising from the piezo-film capacitive nature in the targeted frequency range (from quasi-dc up to 12 Hz), is illustrated. The system is based on a commercial piezo-film placed easily on the radial artery with a special brace without any discomfort for the patient. The analogical conditioning circuit and digital signal processing are continuously tuned with the signal from the sensor to reconstruct the blood pressure signal online. Diagnostic schema, based on physio-pathological models, have been implemented in order to compute online trends of max[dP(t)/d(t)] and volemic status highly useful for the intensivist and anaesthesiologist. The system was characterized by numerical simulation and experimental in vivo comparison to the traditional reference system

Gender Differences in the Continuance of Online Social Networks

Science.gov (United States)

Shi, Na; Cheung, Christy M. K.; Lee, Matthew K. O.; Chen, Huaping

Social network sites (SNS) have become increasingly popular in the past few years benefiting from the rapid growth of Web 2.0 applications. However, research on the adoption and usage of SNS is limited. In this study, we attempt to understand users' continuance intention to use SNS and investigate the role of gender. A research model was developed and tested with 213 respondents from an online survey. The results confirm that users' continuance intention to use SNS is strongly determined by satisfaction. The effect of disconfirmation of maintaining offline contacts on satisfaction is more important for women, while the effect of disconfirmation of entertainment is more salient for men. Implications of this study for both researchers and practitioners are discussed.

Smartphone-based Continuous Blood Pressure Measurement Using Pulse Transit Time.

Science.gov (United States)

Gholamhosseini, Hamid; Meintjes, Andries; Baig, Mirza; Linden, Maria

2016-01-01

The increasing availability of low cost and easy to use personalized medical monitoring devices has opened the door for new and innovative methods of health monitoring to emerge. Cuff-less and continuous methods of measuring blood pressure are particularly attractive as blood pressure is one of the most important measurements of long term cardiovascular health. Current methods of noninvasive blood pressure measurement are based on inflation and deflation of a cuff with some effects on arteries where blood pressure is being measured. This inflation can also cause patient discomfort and alter the measurement results. In this work, a mobile application was developed to collate the PhotoPlethysmoGramm (PPG) waveform provided by a pulse oximeter and the electrocardiogram (ECG) for calculating the pulse transit time. This information is then indirectly related to the user's systolic blood pressure. The developed application successfully connects to the PPG and ECG monitoring devices using Bluetooth wireless connection and stores the data onto an online server. The pulse transit time is estimated in real time and the user's systolic blood pressure can be estimated after the system has been calibrated. The synchronization between the two devices was found to pose a challenge to this method of continuous blood pressure monitoring. However, the implemented continuous blood pressure monitoring system effectively serves as a proof of concept. This combined with the massive benefits that an accurate and robust continuous blood pressure monitoring system would provide indicates that it is certainly worthwhile to further develop this system.

On-Line Ion Exchange Liquid Chromatography as a Process Analytical Technology for Monoclonal Antibody Characterization in Continuous Bioprocessing.

Science.gov (United States)

Patel, Bhumit A; Pinto, Nuno D S; Gospodarek, Adrian; Kilgore, Bruce; Goswami, Kudrat; Napoli, William N; Desai, Jayesh; Heo, Jun H; Panzera, Dominick; Pollard, David; Richardson, Daisy; Brower, Mark; Richardson, Douglas D

2017-11-07

Combining process analytical technology (PAT) with continuous production provides a powerful tool to observe and control monoclonal antibody (mAb) fermentation and purification processes. This work demonstrates on-line liquid chromatography (on-line LC) as a PAT tool for monitoring a continuous biologics process and forced degradation studies. Specifically, this work focused on ion exchange chromatography (IEX), which is a critical separation technique to detect charge variants. Product-related impurities, including charge variants, that impact function are classified as critical quality attributes (CQAs). First, we confirmed no significant differences were observed in the charge heterogeneity profile of a mAb through both at-line and on-line sampling and that the on-line method has the ability to rapidly detect changes in protein quality over time. The robustness and versatility of the PAT methods were tested by sampling from two purification locations in a continuous mAb process. The PAT IEX methods used with on-line LC were a weak cation exchange (WCX) separation and a newly developed shorter strong cation exchange (SCX) assay. Both methods provided similar results with the distribution of percent acidic, main, and basic species remaining unchanged over a 2 week period. Second, a forced degradation study showed an increase in acidic species and a decrease in basic species when sampled on-line over 7 days. These applications further strengthen the use of on-line LC to monitor CQAs of a mAb continuously with various PAT IEX analytical methods. Implementation of on-line IEX will enable faster decision making during process development and could potentially be applied to control in biomanufacturing.

Evaluating online continuing medical education seminars: evidence for improving clinical practices.

Science.gov (United States)

Weston, Christine M; Sciamanna, Christopher N; Nash, David B

2008-01-01

The purpose of this study was to evaluate the potential for online continuing medical education (CME) seminars to improve quality of care. Primary care physicians (113) participated in a randomized controlled trial to evaluate an online CME series. Physicians were randomized to view either a seminar about type 2 diabetes or a seminar about systolic heart failure. Following the seminar, physicians were presented with 4 clinical vignettes and asked to describe what tests, treatments, counseling, or referrals they would recommend. Physicians who viewed the seminars were significantly more likely to recommend guideline-consistent care to patients in the vignettes. For example, physicians who viewed the diabetes seminar were significantly more likely to order an eye exam for diabetes patients (63%) compared with physicians in the control group (27%). For some guidelines there were no group differences. These results provide early evidence of the effectiveness of online CME programs to improve physician clinical practice.

Modeling gene expression measurement error: a quasi-likelihood approach

Directory of Open Access Journals (Sweden)

Strimmer Korbinian

2003-03-01

Full Text Available Abstract Background Using suitable error models for gene expression measurements is essential in the statistical analysis of microarray data. However, the true probabilistic model underlying gene expression intensity readings is generally not known. Instead, in currently used approaches some simple parametric model is assumed (usually a transformed normal distribution or the empirical distribution is estimated. However, both these strategies may not be optimal for gene expression data, as the non-parametric approach ignores known structural information whereas the fully parametric models run the risk of misspecification. A further related problem is the choice of a suitable scale for the model (e.g. observed vs. log-scale. Results Here a simple semi-parametric model for gene expression measurement error is presented. In this approach inference is based an approximate likelihood function (the extended quasi-likelihood. Only partial knowledge about the unknown true distribution is required to construct this function. In case of gene expression this information is available in the form of the postulated (e.g. quadratic variance structure of the data. As the quasi-likelihood behaves (almost like a proper likelihood, it allows for the estimation of calibration and variance parameters, and it is also straightforward to obtain corresponding approximate confidence intervals. Unlike most other frameworks, it also allows analysis on any preferred scale, i.e. both on the original linear scale as well as on a transformed scale. It can also be employed in regression approaches to model systematic (e.g. array or dye effects. Conclusions The quasi-likelihood framework provides a simple and versatile approach to analyze gene expression data that does not make any strong distributional assumptions about the underlying error model. For several simulated as well as real data sets it provides a better fit to the data than competing models. In an example it also

Evaluation of an online continuing education program from the perspective of new graduate nurses.

Science.gov (United States)

Karaman, Selcuk; Kucuk, Sevda; Aydemir, Melike

2014-05-01

The aim of this study is to evaluate the online continuing education program from the perspectives of new graduate nurses. An evaluation framework includes five factors (program and course structure, course materials, technology, support services and assessment). In this study, descriptive research methods were used. Participants of the study included 2.365 registered nurses enrolled in the first online nursing bachelor completion degree program in the country. Data were collected by survey. The findings indicated that students were mostly satisfied with this program. The results of this study suggest that well designed asynchronous online education methods can be effective and appropriate for registered nurses. However, the provision of effective support and technological infrastructure is as vital as the quality of teaching for online learners. © 2013.

Continuous measurement of heart rate variability following carbon ...

African Journals Online (AJOL)

Background: Previous studies of autonomic nervous system activity through analysis of heart rate variability (HRV) have demonstrated increased sympathetic activity during positive-pressure pneumoperitoneum. We employed an online, continuous method for rapid HRV analysis (MemCalc™, Tarawa, Suwa Trust, Tokyo, ...

Measuring Quality in Online Education: A Meta-Synthesis

Science.gov (United States)

Esfijani, Azam

2018-01-01

This article presents a meta-synthesis review of quality of online education (QOE) measurement approaches. In order to survey the existing body of knowledge, a qualitative method was employed to investigate what quality of online education is comprised of and how the concept has been measured through the literature. To achieve this, a total of 112…

A new technique for online measurement of total and water-soluble copper (Cu) in coarse particulate matter (PM)

International Nuclear Information System (INIS)

Wang, Dongbin; Shafer, Martin M.; Schauer, James J.; Sioutas, Constantinos

2015-01-01

This study presents a novel system for online, field measurement of copper (Cu) in ambient coarse (2.5–10 μm) particulate matter (PM). This new system utilizes two virtual impactors combined with a modified liquid impinger (BioSampler) to collect coarse PM directly as concentrated slurry samples. The total and water-soluble Cu concentrations are subsequently measured by a copper Ion Selective Electrode (ISE). Laboratory evaluation results indicated excellent collection efficiency (over 85%) for particles in the coarse PM size ranges. In the field evaluations, very good agreements for both total and water-soluble Cu concentrations were obtained between online ISE-based monitor measurements and those analyzed by means of inductively coupled plasma mass spectrometry (ICP-MS). Moreover, the field tests indicated that the Cu monitor could achieve near-continuous operation for at least 6 consecutive days (a time resolution of 2–4 h) without obvious shortcomings. - Highlights: • A novel only PM sampling and Cu measuring technology is developed. • Very good particle collection efficiency for coarse PM is observed. • Excellent agreement is obtained between Cu ISE and offline ICP-MS measurements. • The new system can be continuously operated for at least 6 consecutive days. - A new technique for online measurements of Cu in coarse PM is described

E-learning on the road: online learning and social media for continuing professional competency.

Directory of Open Access Journals (Sweden)

Alan M Batt

2016-06-01

Full Text Available Background The impact of social media and online learning in health professions education has previously shown generally positive results in medical, nursing and pharmacy students. To date there has not been any extensive research into social media and online learning use by prehospital health care professionals such as paramedics. Aim & Methods We sought to identify the extent to which Irish pre-hospital practitioners make use of online learning and social media for continuous professional competency (CPC, and the means by which they do so. A cross-sectional online survey of practitioners was conducted to obtain both quantitative and qualitative data. The release of the survey was in a controlled manner to PHECC registrants via various channels. Participation was voluntary and anonymous. Results A total of 248 respondents completed the survey in full by closing date of 31 March 2015, representing 5.4% of all registrants (n=4,555. 77% of respondents were male, and the majority were registered as Emergency Medical Technicians (49%, followed by Advanced Paramedics (26%. Over 78% of respondents used a mobile device in the course of their clinical duties; the majority used an iOS device. Social media and online learning were considered learning tools by over 75% of respondents, and over 74% agreed they should be further incorporated into prehospital education. The most popular platforms for CPC activities were YouTube and Facebook. The majority of respondents (88% viewed self-directed activities to constitute continuous professional development activity, but 64% felt that an activity that resulted in the awarding of a certificate was better value. Over 90% of respondents had previous experience with online learning, but only 42% indicated they had previously purchased or paid for online learning. Conclusion Prehospital practitioners in Ireland in the population studied consider online learning and social media acceptable for CPC purposes. The main

Technology-driven online marketing performance measurement: lessons from affiliate marketing

OpenAIRE

Bowie, David; Paraskevas, Alexandros; Mariussen, Anastasia

2014-01-01

Although the measurement of offline and online marketing is extensively researched, the literature on online performance measurement still has a number of limitations such as slow theory advancement and predominance of technology- and practitioner-driven measurement approaches. By focusing on the widely employed but under-researched affiliate marketing channel, this study addresses these limitations and evaluates the effectiveness of practitioner-led online performance assessment. The paper o...

Continuous Online Sequence Learning with an Unsupervised Neural Network Model.

Science.gov (United States)

Cui, Yuwei; Ahmad, Subutar; Hawkins, Jeff

2016-09-14

The ability to recognize and predict temporal sequences of sensory inputs is vital for survival in natural environments. Based on many known properties of cortical neurons, hierarchical temporal memory (HTM) sequence memory recently has been proposed as a theoretical framework for sequence learning in the cortex. In this letter, we analyze properties of HTM sequence memory and apply it to sequence learning and prediction problems with streaming data. We show the model is able to continuously learn a large number of variableorder temporal sequences using an unsupervised Hebbian-like learning rule. The sparse temporal codes formed by the model can robustly handle branching temporal sequences by maintaining multiple predictions until there is sufficient disambiguating evidence. We compare the HTM sequence memory with other sequence learning algorithms, including statistical methods: autoregressive integrated moving average; feedforward neural networks-time delay neural network and online sequential extreme learning machine; and recurrent neural networks-long short-term memory and echo-state networks on sequence prediction problems with both artificial and real-world data. The HTM model achieves comparable accuracy to other state-of-the-art algorithms. The model also exhibits properties that are critical for sequence learning, including continuous online learning, the ability to handle multiple predictions and branching sequences with high-order statistics, robustness to sensor noise and fault tolerance, and good performance without task-specific hyperparameter tuning. Therefore, the HTM sequence memory not only advances our understanding of how the brain may solve the sequence learning problem but is also applicable to real-world sequence learning problems from continuous data streams.

Considerations and benefits of implementing an online database tool for business continuity.

Science.gov (United States)

Mackinnon, Susanne; Pinette, Jennifer

2016-01-01

In today's challenging climate of ongoing fiscal restraints, limited resources and complex organisational structures there is an acute need to investigate opportunities to facilitate enhanced delivery of business continuity programmes while maintaining or increasing acceptable levels of service delivery. In 2013, Health Emergency Management British Columbia (HEMBC), responsible for emergency management and business continuity activities across British Columbia's health sector, transitioned its business continuity programme from a manual to automated process with the development of a customised online database, known as the Health Emergency Management Assessment Tool (HEMAT). Key benefits to date include a more efficient business continuity input process, immediate situational awareness for use in emergency response and/or advanced planning and streamlined analyses for generation of reports.

A method for realistic assessment of the environmental load following an accident in a nuclear facility taking into consideration measured values from environment monitoring

International Nuclear Information System (INIS)

Geiss, H.

1985-01-01

To enable consideration of time and space variations of source properties and of meteorological parameters, the quasi-stationary computational programme MUSEMET was developed for risk assessment. It was the modified for use in the prognosis of radiation exposure following accidents, in view of on-line registration of current meteorological data in 5- or 10-minute increments. By direct time-dependent continuous measurement of turbulence parameters a classification of diffusion categories is no more required. The diffusion parameters needed for this quasi-instationary Gaussian model are also determined continuously from turbulence measurements. MUSEMET and/or the follow-up programme MUSEDOS allow the determination of time- and location-dependent individual dose rates received by inhalation, γ- and β-submersion, γ-radiation from contaminated floors and by ingestion. An illustration is made in time-dependent form on a graphic display showing isodose lines together with a map of the site surroundings, or in tables. The anticipated values are continuously compared with the measured values from environment monitoring. γ-spectrometric measurements in particular can be exploited for calculations designed to enable accurate statements on the source, and the prognosis can be corrected accordingly. (orig./HP) [de

Measuring Student Engagement in the Online Course: The Online Student Engagement Scale (OSE)

Science.gov (United States)

Dixson, Marcia D.

2015-01-01

Student engagement is critical to student learning, especially in the online environment, where students can often feel isolated and disconnected. Therefore, teachers and researchers need to be able to measure student engagement. This study provides validation of the Online Student Engagement scale (OSE) by correlating student self-reports of…

Quasi-continuously pumped operation of 2.4% doped crystalline Nd:YAG in a bounce geometry

Science.gov (United States)

Kubeček, Václav; Jelínek, Michal; Čech, Miroslav; Hiršl, Petr

2009-02-01

We report on efficient operation of highly doped 2.4 at. % crystalline Czochralski grown Nd:YAG at 1.06μm, 1.3μm and 1.4μm in a diode pumped bounce amplifier configuration under quasi-continuous pumping. At wavelength of 1064nm the linearly polarized pulses with energy of 16.8 mJ in free running regime with repetition rate of 10 Hz (optical to optical efficiency of 44.6 % and slope efficiency of 50%) and 1 mJ in passively Q-switched regime with pulse duration of 6.4 ns were generated.The passively Q switched operation at 1.3μm was also demonstrated.

Continuous acid dew point measurement in coal-fired power plants; Kontinuierliche Saeuretaupunktmessung in Braunkohlekraftwerken

Energy Technology Data Exchange (ETDEWEB)

Foedisch, Holger; Schulz, Joerg; Schengber, Petra; Dietrich, Gabriele [Dr. Foedisch Umweltmesstechnik AG, Markranstaedt (Germany)

2009-07-01

The reduction of flue gas losses is one option to increase power plant efficiency. The target is the optimised low waste gas temperature. When applying lignite and other high-sulphur fuels the temperature of the flue gas is mainly determined by the acid dew point. Temperature of the flue gas system is to amount some 10 to 20 K above the assumed acid dew point. The acid dew point measuring system AMD 08 is able to detect the real acid dew point in a quasi-continuous way. Thus, it is possible to deliberately decrease waste gas temperature. (orig.)

Quasi-continuous stochastic simulation framework for flood modelling

Science.gov (United States)

Moustakis, Yiannis; Kossieris, Panagiotis; Tsoukalas, Ioannis; Efstratiadis, Andreas

2017-04-01

Typically, flood modelling in the context of everyday engineering practices is addressed through event-based deterministic tools, e.g., the well-known SCS-CN method. A major shortcoming of such approaches is the ignorance of uncertainty, which is associated with the variability of soil moisture conditions and the variability of rainfall during the storm event.In event-based modeling, the sole expression of uncertainty is the return period of the design storm, which is assumed to represent the acceptable risk of all output quantities (flood volume, peak discharge, etc.). On the other hand, the varying antecedent soil moisture conditions across the basin are represented by means of scenarios (e.g., the three AMC types by SCS),while the temporal distribution of rainfall is represented through standard deterministic patterns (e.g., the alternative blocks method). In order to address these major inconsistencies,simultaneously preserving the simplicity and parsimony of the SCS-CN method, we have developed a quasi-continuous stochastic simulation approach, comprising the following steps: (1) generation of synthetic daily rainfall time series; (2) update of potential maximum soil moisture retention, on the basis of accumulated five-day rainfall; (3) estimation of daily runoff through the SCS-CN formula, using as inputs the daily rainfall and the updated value of soil moisture retention;(4) selection of extreme events and application of the standard SCS-CN procedure for each specific event, on the basis of synthetic rainfall.This scheme requires the use of two stochastic modelling components, namely the CastaliaR model, for the generation of synthetic daily data, and the HyetosMinute model, for the disaggregation of daily rainfall to finer temporal scales. Outcomes of this approach are a large number of synthetic flood events, allowing for expressing the design variables in statistical terms and thus properly evaluating the flood risk.

Online nutrition and T2DM continuing medical education course launched on state-level medical association.

Science.gov (United States)

Hicks, Kristen K; Murano, Peter S

2017-01-01

The purpose of this research study was to determine whether a 1-hour online continuing medical education (CME) course focused on nutrition for type 2 diabetes would result in a gain in nutrition knowledge by practicing physicians. A practicing physician and dietitian collaborated to develop an online CME course (both webinar and self-study versions) on type 2 diabetes. This 1-hour accredited course was launched through the state-level medical association's education library, available to all physicians. Physicians (n=43) registered for the course, and of those, 31 completed the course in its entirety. A gain in knowledge was found when comparing pre- versus post-test scores related to the online nutrition CME ( P Online CME courses launched via state-level medical associations offer convenient continuing education to assist practicing physicians in addressing patient nutrition and lifestyle concerns related to chronic disease. The present diabetes CME one-credit course allowed physicians to develop basic nutrition care concepts on this topic to assist patients in a better way.

An online spaced-education game for global continuing medical education: a randomized trial.

Science.gov (United States)

Kerfoot, B Price; Baker, Harley

2012-07-01

To assess the efficacy of a "spaced-education" game as a method of continuing medical education (CME) among physicians across the globe. The efficacy of educational games for the CME has yet to be established. We created a novel online educational game by incorporating game mechanics into "spaced education" (SE), an evidence-based method of online CME. This 34-week randomized trial enrolled practicing urologists across the globe. The SE game consisted of 40 validated multiple-choice questions and explanations on urology clinical guidelines. Enrollees were randomized to 2 cohorts: cohort A physicians were sent 2 questions via an automated e-mail system every 2 days, and cohort B physicians were sent 4 questions every 4 days. Adaptive game mechanics re-sent the questions in 12 or 24 days if answered incorrectly and correctly, respectively. Questions expired if not answered on time (appointment dynamic). Physicians retired questions by answering each correctly twice-in-a-row (progression dynamic). Competition was fostered by posting relative performance among physicians. Main outcome measures were baseline scores (percentage of questions answered correctly upon initial presentation) and completion scores (percentage of questions retired). A total of 1470 physicians from 63 countries enrolled. Median baseline score was 48% (interquartile range [IQR] 17) and, in multivariate analyses, was found to vary significantly by region (Cohen dmax = 0.31, P = 0.001) and age (dmax = 0.41, P games. An online SE game can substantially improve guidelines knowledge and is a well-accepted method of global CME delivery.

Semi-continuous on-line uranium ore analyzer

International Nuclear Information System (INIS)

Campbell, P.; Gurdy, E.M.; Hatchowski, L.

1984-01-01

The efficient process control of a uranium mill and its associated mining operation requires a nearly continuous knowledge of the uranium concentration in the ore. Generally, the approach is to use laboratory assays of grab samples from the mill feed belt. In some cases, elaborate and expensive systems have been used to ensure random sampling, but even with these systems, mass-balance discrepancies still exist. There is a requirement for an on-line instrument that can give a prompt, accurate analysis of a large portion of the feed stock. The authors have recently evaluated a laboratory system that achieves these goals using neutron activation and delayed neutron counting. The development of the on-line uranium ore analyzer is a consequence of previous work done at the Whiteshell Nuclear Research Establishment (WNRE) (Campbell et al., 1978 and 1981), and is based on the emission of delayed neutrons after the neutron irradiation of fissionable materials. The mechanism of delayed neutron emission has been described (Keepin, 1965), but briefly is as follows. The fission fragments resulting from irradiation are in an excited state. Certain of these delayed fission products, precursors, decay to a more stable state by the emission of a delayed neutron. The delayed neutrons can be divided into six groups with effective half-lives ranging from 0.2-55 sec. It is important to note that more than 50% of the delayed neutrons are emitted within the first 6 sec after irradiation; this has an influence on the design of the analysis instrument

Tandem on-line continuous separations for atomic spectroscopic indirect analysis: iodide determination by ICP-AES

International Nuclear Information System (INIS)

Garcia, A.M.; Sanchez Uria, J.E.; Sanz-Medel, A.; Quintero Ortega, M.C.; Bautista, J.C.

1992-01-01

A sensitive and selective indirect determination of iodide by inductively coupled plasma emission spectrometry (ICP-AES) based on the principle of tandem on-line continuous separations as an alternative means of introducing samples into plasmas is proposed. Iodide is continuously extracted as an ion-pair into xylene by mixing the sample with Hg(II) and dipyridil solutions. The organic phase (containing the analyte in [Hg(Dipy) 2 ]I 2 form) is on-line continuously mixed with NaBH 4 (in DMF) and acetic acid solutions. Mercury vapour continuously generated from this organic phase is separated in a classical U-type gas-liquid separation device. The system has been optimized for the continuous extraction of KI, for the direct generation of cold mercury vapour from xylene and for the final ICP-AES determination of mercury. The optimised method has been applied to the determination of iodide (detection limit 20 ng/ml of iodide) in table salt and in synthetic samples. Very good agreement between found and certified results was observed. The usefulness and convenience of such alternative sample chemical pretreatment/presentation to the ICP is thus demonstrated for indirect determinations to be carried out by atomic spectroscopy methods. (authors)

Online radiation dose measurement system for ATLAS experiment

International Nuclear Information System (INIS)

Mandic, I.; Cindro, V.; Dolenc, I.; Gorisek, A.; Kramberger, G.; Mikuz, M.; Bronner, J.; Hartet, J.; Franz, S.

2009-01-01

In experiments at Large Hadron Collider, detectors and electronics will be exposed to high fluxes of photons, charged particles and neutrons. Damage caused by the radiation will influence performance of detectors. It will therefore be important to continuously monitor the radiation dose in order to follow the level of degradation of detectors and electronics and to correctly predict future radiation damage. A system for online radiation monitoring using semiconductor radiation sensors at large number of locations has been installed in the ATLAS experiment. Ionizing dose in SiO 2 will be measured with RadFETs, displacement damage in silicon in units of 1-MeV(Si) equivalent neutron fluence with p-i-n diodes. At 14 monitoring locations where highest radiation levels are expected the fluence of thermal neutrons will be measured from current gain degradation in dedicated bipolar transistors. The design of the system and tests of its performance in mixed radiation field is described in this paper. First results from this test campaign confirm that doses can be measured with sufficient sensitivity (mGy for total ionizing dose measurements, 10 9 n/cm 2 for NIEL (non-ionizing energy loss) measurements, 10 12 n/cm 2 for thermal neutrons) and accuracy (about 20%) for usage in the ATLAS detector

Critical phenomena in quasi-two-dimensional vibrated granular systems.

Science.gov (United States)

Guzmán, Marcelo; Soto, Rodrigo

2018-01-01

The critical phenomena associated to the liquid-to-solid transition of quasi-two-dimensional vibrated granular systems is studied using molecular dynamics simulations of the inelastic hard sphere model. The critical properties are associated to the fourfold bond-orientational order parameter χ_{4}, which measures the level of square crystallization of the system. Previous experimental results have shown that the transition of χ_{4}, when varying the vibration amplitude, can be either discontinuous or continuous, for two different values of the height of the box. Exploring the amplitude-height phase space, a transition line is found, which can be either discontinuous or continuous, merging at a tricritical point and the continuous branch ends in an upper critical point. In the continuous transition branch, the critical properties are studied. The exponent associated to the amplitude of the order parameter is β=1/2, for various system sizes, in complete agreement with the experimental results. However, the fluctuations of χ_{4} do not show any critical behavior, probably due to crossover effects by the close presence of the tricritical point. Finally, in quasi-one-dimensional systems, the transition is only discontinuous, limited by one critical point, indicating that two is the lower dimension for having a tricritical point.

Online Game Addiction among Chinese College Students Measurement and Attribution.

Science.gov (United States)

Zhou, Yuqiong; Li, Zhitian

2009-01-01

This study made an initial attempt to measure and attribute online game addiction among Chinese college students. We generated three factors of online game addiction: Control Disorder, Conflict, and Injury, as well as proposed a comprehensive model that attributed online game addiction to three groups of driving forces: environmental influences (most significant), characteristics of online games, and personal reasons.

Experiences and perceptions of online continuing professional development among clinicians in sub-Saharan Africa.

Science.gov (United States)

Feldacker, Caryl; Jacob, Sheena; Chung, Michael H; Nartker, Anya; Kim, H Nina

2017-12-29

Limitations in healthcare worker (HCW) capacity compound the burden of dual TB and HIV epidemics in sub-Saharan Africa. To fill gaps in knowledge and skills, effective continuing profession development (CPD) initiatives are needed to support practicing HCWs reach high standards of care. e-learning opportunities can bring expert knowledge to HCWs in the field and provide a flexible learning option adaptable to local settings. Few studies provide insight into HCW experiences with online CPD in the developing country context. An online survey using both close-ended and free response was conducted to HCWs in sub-Saharan Africa who completed the University of Washington (UW) School of Medicine online graduate course, "Clinical Management of HIV." Associations between respondent characteristics (age, gender, rural/urban, job title) and learning preferences, course barriers, and facilitators with an emphasis on online courses were examined using chi-square. Covariates significant at the p online course from work, noting that slow (55%) or limited (41%) internet as well as lack of time (53%) were barriers to course completion. Women (p online courses by noting the knowledge gains, the flexibility of format, a desire for recognition of course completion, and a request for additional online coursework. Online CPD opportunities were accepted across a diverse group of HCWs from sub-Saharan Africa and should be expanded to provide more flexible opportunities for self-initiated learning; however, these need to be responsive to the limited resources of those who seek these courses.

Quasi-continuously pumped passively mode-locked 2.4% doped Nd:YAG oscillator-amplifier system in a bounce geometry

Science.gov (United States)

Jelínek, Michal; Kubecek, Vaclav; Cech, Miroslav; Hirsl, Petr

2010-02-01

We report on oscillator-amplifier system based on two highly doped 2.4 at. % crystalline Czochralski grown Nd:YAG crystals in a diode pumped bounce geometry configuration under quasi-continuous pumping. The oscillator was passively mode-locked by the semiconductor saturable absorber in transmission mode. The output pulse train consisted of 5 pulses with total energy of 270 μJ and pulse duration of 75 ps. The output train from the oscillator was amplified to the energy of 1 mJ by single pass amplifier.

Measurement of Online Social Networks

Science.gov (United States)

Gjoka, Mina

2010-01-01

In recent years, the popularity of online social networks (OSN) has risen to unprecedented levels, with the most popular ones having hundreds of millions of users. This success has generated interest within the networking community and has given rise to a number of measurement and characterization studies, which provide a first step towards their…

Quasi-Feller Markov chains

Directory of Open Access Journals (Sweden)

Jean B. Lasserre

2000-01-01

Full Text Available We consider the class of Markov kernels for which the weak or strong Feller property fails to hold at some discontinuity set. We provide a simple necessary and sufficient condition for existence of an invariant probability measure as well as a Foster-Lyapunov sufficient condition. We also characterize a subclass, the quasi (weak or strong Feller kernels, for which the sequences of expected occupation measures share the same asymptotic properties as for (weak or strong Feller kernels. In particular, it is shown that the sequences of expected occupation measures of strong and quasi strong-Feller kernels with an invariant probability measure converge setwise to an invariant measure.

New Electric Online Oil Condition Monitoring Sensor – an Innovation in Early Failure Detection of Industrial Gears

Directory of Open Access Journals (Sweden)

Manfred Mauntz

2013-02-01

Full Text Available A new online diagnostics system for the continuous condition monitoring of lubricating oils in industrial gearboxes is presented. Characteristic features of emerging component damage, such as wear, contamination or chemical aging, are identified in an early stage. The OilQSens® sensor effectively controls the proper operation conditions of bearings and cogwheels in gears. Also, the condition of insulating oils in transformers can be monitored. The online diagnostics system measures components of the specific complex impedance of oils. For instance, metal abrasion due to wear debris, broken oil molecules, forming acids or oil soaps result in an increase of the electrical conductivity, which directly correlates with the degree of contamination in the oil. The dielectrical properties of the oils are particularly determined by the water content that becomes accessible via an additional accurate measurement of the dielectric constant. For additivated oils, statements on the degradation of additives can also be derived from changes in the dielectric constant. For an efficient machine utilization and targeted damage prevention, the new OilQSens® online condition monitoring sensor system allows for timely preventative maintenance on demand rather than in rigid inspection intervals. The determination of impurities or reduction in the quality of the oil and the quasi continuous evaluation of wear and chemical aging follow the holistic approach of a real-time monitoring of a change in the condition of the oil-machine system. Once the oil condition monitoring sensors are installed on the plants, the measuring data can be displayed and evaluated elsewhere. The measuring signals are transmitted to a web-based condition monitoring system via LAN, WLAN or serial interfaces of the sensor system. Monitoring of the damage mechanisms during proper operation below the tolerance limits of the components enables specific preventive maintenance independent of rigid

Assessing segmentation processes by click detection: online measure of statistical learning, or simple interference?

Science.gov (United States)

Franco, Ana; Gaillard, Vinciane; Cleeremans, Axel; Destrebecqz, Arnaud

2015-12-01

Statistical learning can be used to extract the words from continuous speech. Gómez, Bion, and Mehler (Language and Cognitive Processes, 26, 212-223, 2011) proposed an online measure of statistical learning: They superimposed auditory clicks on a continuous artificial speech stream made up of a random succession of trisyllabic nonwords. Participants were instructed to detect these clicks, which could be located either within or between words. The results showed that, over the length of exposure, reaction times (RTs) increased more for within-word than for between-word clicks. This result has been accounted for by means of statistical learning of the between-word boundaries. However, even though statistical learning occurs without an intention to learn, it nevertheless requires attentional resources. Therefore, this process could be affected by a concurrent task such as click detection. In the present study, we evaluated the extent to which the click detection task indeed reflects successful statistical learning. Our results suggest that the emergence of RT differences between within- and between-word click detection is neither systematic nor related to the successful segmentation of the artificial language. Therefore, instead of being an online measure of learning, the click detection task seems to interfere with the extraction of statistical regularities.

Maximizing the productivity of the microalgae Scenedesmus AMDD cultivated in a continuous photobioreactor using an online flow rate control.

Science.gov (United States)

McGinn, Patrick J; MacQuarrie, Scott P; Choi, Jerome; Tartakovsky, Boris

2017-01-01

In this study, production of the microalga Scenedesmus AMDD in a 300 L continuous flow photobioreactor was maximized using an online flow (dilution rate) control algorithm. To enable online control, biomass concentration was estimated in real time by measuring chlorophyll-related culture fluorescence. A simple microalgae growth model was developed and used to solve the optimization problem aimed at maximizing the photobioreactor productivity. When optimally controlled, Scenedesmus AMDD culture demonstrated an average volumetric biomass productivity of 0.11 g L -1  d -1 over a 25 day cultivation period, equivalent to a 70 % performance improvement compared to the same photobioreactor operated as a turbidostat. The proposed approach for optimizing photobioreactor flow can be adapted to a broad range of microalgae cultivation systems.

The quasi-equilibrium response of MOS structures: Quasi-static factor

Science.gov (United States)

Okeke, M.; Balland, B.

1984-07-01

The dynamic response of a MOS structure driven into a non-equilibrium behaviour by a voltage ramp is presented. In contrast to Khun's quasi-static technique it is shown that any ramp-driven MOS structure has some degree of non-equilibrium. A quasi staticity factor μAK which serves as a measure of the degree of quasi-equilibrium, has been introduced for the first time. The mathematical model presented in the paper allows a better explanation of the experimental recordings. It is shown that this model could be used to analyse the various features of the response of the structure and that such physical parameters as the generation-rate, trap activation energy, and the effective capture constants could be obtained.

The Journalism Writing Course: Evaluation of Hybrid versus Online Grammar Instruction

Science.gov (United States)

Moore, Jensen; Jones, Khristen

2015-01-01

This study examined introductory journalism writing courses and compared hybrid (part online/part classroom) versus online grammar instruction. The hybrid structure allowed for grammar topics to be taught online, with a pretest following, and then reviewing missed/difficult pretest concepts in class prior to a posttest. The quasi-experimental…

Online radiation dose measurement system for ATLAS experiment

Energy Technology Data Exchange (ETDEWEB)

Mandic, I.; Cindro, V.; Dolenc, I.; Gorisek, A.; Kramberger, G. [Jozef Stefan Institute, Jamova 39, Ljubljana (Slovenia); Mikuz, M. [Jozef Stefan Institute, Jamova 39, Ljubljana (Slovenia); Faculty of Mathematics and Physics, University of Ljubljana (Slovenia); Bronner, J.; Hartet, J. [Physikalisches Institut, Universitat Freiburg, Hermann-Herder-Str. 3, Freiburg (Germany); Franz, S. [CERN, Geneva (Switzerland)

2009-07-01

In experiments at Large Hadron Collider, detectors and electronics will be exposed to high fluxes of photons, charged particles and neutrons. Damage caused by the radiation will influence performance of detectors. It will therefore be important to continuously monitor the radiation dose in order to follow the level of degradation of detectors and electronics and to correctly predict future radiation damage. A system for online radiation monitoring using semiconductor radiation sensors at large number of locations has been installed in the ATLAS experiment. Ionizing dose in SiO{sub 2} will be measured with RadFETs, displacement damage in silicon in units of 1-MeV(Si) equivalent neutron fluence with p-i-n diodes. At 14 monitoring locations where highest radiation levels are expected the fluence of thermal neutrons will be measured from current gain degradation in dedicated bipolar transistors. The design of the system and tests of its performance in mixed radiation field is described in this paper. First results from this test campaign confirm that doses can be measured with sufficient sensitivity (mGy for total ionizing dose measurements, 10{sup 9} n/cm{sup 2} for NIEL (non-ionizing energy loss) measurements, 10{sup 12} n/cm{sup 2} for thermal neutrons) and accuracy (about 20%) for usage in the ATLAS detector

Minimax discrimination of quasi-Bell states

Energy Technology Data Exchange (ETDEWEB)

Kato, Kentaro [Quantum ICT Research Institute, Tamagawa University, 6-1-1 Tamagawa-gakuen, Machida, Tokyo 194-8610 (Japan)

2014-12-04

An optimal quantum measurement is considered for the so-called quasi-Bell states under the quantum minimax criterion. It is shown that the minimax-optimal POVM for the quasi-Bell states is given by its square-root measurement and is applicable to the teleportation of a superposition of two coherent states.

Evaluation of the quasi-isothermal method of modulated DSC for heat capacity measurement

International Nuclear Information System (INIS)

Venkata Krishnan, R.; Nagarajan, K.

2004-01-01

Heat capacity measurements were carried out on ThO 2 by Modulated Differential Scanning Calorimetry (MDSC) using quasi-isothermal method in the temperature range 323-723 K. The highest accuracy of the heat capacity data obtained by this method was ± 2-3% which is much lower than that reported in the literature. (author)

On-Line Voltage Stability Assessment based on PMU Measurements

DEFF Research Database (Denmark)

Garcia-Valle, Rodrigo; P. Da Silva, Luiz C.; Nielsen, Arne Hejde

2009-01-01

This paper presents a method for on-line monitoring of risk voltage collapse based on synchronised phasor measurement. As there is no room for intensive computation and analysis in real-time, the method is based on the combination of off-line computation and on-line monitoring, which are correlat...

'We do it to keep him alive': bereaved individuals' experiences of online suicide memorials and continuing bonds.

Science.gov (United States)

Bell, Jo; Bailey, Louis; Kennedy, David

2015-10-02

This paper presents draws on interviews with individuals who have experience of creating, maintaining and utilising Facebook sites in memory of a loved one who has died by suicide. We argue that Facebook enables the deceased to be an on-going active presence in the lives of the bereaved. We highlight the potential of the Internet (and Facebook in particular) as a new and emerging avenue for the continuation of online identities and continuing bonds. Our study offers unique insight into survivors' experiences of engaging with the virtual presence of their deceased loved one: how mourners come and go online, how this evolves over time and how the online identity of the deceased evolves even after death. We discuss how Facebook provides new ways for people to experience and negotiate death by suicide and to memorialise the deceased, highlighting the positive impact of this for survivors' mental health. Finally, we describe the creation of tension amongst those who manage their grief in different ways.

On-line dry wood measurement in chips by nuclear means

International Nuclear Information System (INIS)

Oftedal, E.

1978-01-01

A system which has been installed and operating for two years in a Norwegian paper mill is described. It consists of a radiometric conveyor belt weighing instrument, a radiometric moisture guage and a data processor. The weighing instrument uses a cesium 137 source located above the conveyor belt with the radiation detector under the belt. The moisture gauge employs an americium-beryllium neutron source and a slow neutron detector, both placed above the belt. The data is processed and the moisture content calculated is continuously displayed. 4 analogue outputs are also available for automatic on-line process control. The results over a period of 20 months are shown, compared with results from laboratory measurements of samples. The two curves follow each other fairly closely. (JIW)

Driving online shopping: Spending and behavioral differences among women in Saudi Arabia

Directory of Open Access Journals (Sweden)

Al-maghrabi, T.

2010-01-01

Full Text Available This study proposes a revised technology acceptance model that integrates expectation confirmation theory to measure gender differences with regard to continuance online shopping intentions in Saudi Arabia. The sample consists of 650 female respondents. A structural equation model confirms model fit. Perceived enjoyment, usefulness, and subjective norms are determinants of online shopping continuance in Saudi Arabia. High and low online spenders among women in Saudi Arabia are equivalent. The structural weights are also largely equivalent, but the regression paths from perceived site quality to perceived usefulness is not invariant between high and low e-shoppers in Saudi Arabia. This research moves beyond online shopping intentions and includes factors affecting online shopping continuance. The research model explains 60% of the female respondents’ intention to continue shopping online. Online strategies cannot ignore either the direct and indirect spending differences on continuance intentions, and the model can be generalized across Saudi Arabia.

Dynamic-speckle profilometer for online measurements of coating thickness

Energy Technology Data Exchange (ETDEWEB)

Kamshilin, A A [Laboratory of Optical Sensor Technology, Department of Physics, University of Kuopio, PO Box 1627, FIN-70211 Kuopio (Finland); Semenov, D V [Laboratory of Optical Sensor Technology, Department of Physics, University of Kuopio, PO Box 1627, FIN-70211 Kuopio (Finland); Nippolainen, E [Laboratory of Optical Sensor Technology, Department of Physics, University of Kuopio, PO Box 1627, FIN-70211 Kuopio (Finland); Miridonov, S [Optics Department, CICESE, Carr. Tijuana-Ensenada km 107, C.P. 22860, A.P. 360, Ensenada, B.C. (Mexico)

2007-10-15

Online control of thickness of as-deposited coatings is of great importance because it directly affects the quality of protective coatings. We present a novel approach that enables online, real-time and non-contact measurements thickness of thermally sprayed coatings. The proposed technique uses dynamic speckles generated by rapidly deflecting laser beam. Within 10 ms the system can scan 500 times a small area of the deposited layer thus resulting in measurement accuracy of 5 microns irrespectively of the layer roughness. In comparison with traditional optical triangulation technique of distance measurements, our system has following advantages: (i) much simpler optical scheme that includes conventional photodiode to measure the scattered light, (ii) much simpler electronics for real-time data processing, (iii) much higher speed of measurements.

Dynamic-speckle profilometer for online measurements of coating thickness

International Nuclear Information System (INIS)

Kamshilin, A A; Semenov, D V; Nippolainen, E; Miridonov, S

2007-01-01

Online control of thickness of as-deposited coatings is of great importance because it directly affects the quality of protective coatings. We present a novel approach that enables online, real-time and non-contact measurements thickness of thermally sprayed coatings. The proposed technique uses dynamic speckles generated by rapidly deflecting laser beam. Within 10 ms the system can scan 500 times a small area of the deposited layer thus resulting in measurement accuracy of 5 microns irrespectively of the layer roughness. In comparison with traditional optical triangulation technique of distance measurements, our system has following advantages: (i) much simpler optical scheme that includes conventional photodiode to measure the scattered light, (ii) much simpler electronics for real-time data processing, (iii) much higher speed of measurements

Current algebras, measures quasi-invariant under diffeomorphism groups, and infinite quantum systems with accumulation points

Science.gov (United States)

Sakuraba, Takao

The approach to quantum physics via current algebra and unitary representations of the diffeomorphism group is established. This thesis studies possible infinite Bose gas systems using this approach. Systems of locally finite configurations and systems of configurations with accumulation points are considered, with the main emphasis on the latter. In Chapter 2, canonical quantization, quantization via current algebra and unitary representations of the diffeomorphism group are reviewed. In Chapter 3, a new definition of the space of configurations is proposed and an axiom for general configuration spaces is abstracted. Various subsets of the configuration space, including those specifying the number of points in a Borel set and those specifying the number of accumulation points in a Borel set are proved to be measurable using this axiom. In Chapter 4, known results on the space of locally finite configurations and Poisson measure are reviewed in the light of the approach developed in Chapter 3, including the approach to current algebra in the Poisson space by Albeverio, Kondratiev, and Rockner. Goldin and Moschella considered unitary representations of the group of diffeomorphisms of the line based on self-similar random processes, which may describe infinite quantum gas systems with clusters. In Chapter 5, the Goldin-Moschella theory is developed further. Their construction of measures quasi-invariant under diffeomorphisms is reviewed, and a rigorous proof of their conjectures is given. It is proved that their measures with distinct correlation parameters are mutually singular. A quasi-invariant measure constructed by Ismagilov on the space of configurations with accumulation points on the circle is proved to be singular with respect to the Goldin-Moschella measures. Finally a generalization of the Goldin-Moschella measures to the higher-dimensional case is studied, where the notion of covariance matrix and the notion of condition number play important roles. A

A survey investigation of UK physiotherapists' use of online search engines for continuing professional development.

Science.gov (United States)

Harland, Nicholas; Drew, Benjamin T

2013-09-01

The purpose of this study was to discover the frequency and type of use of online resources for continuing professional development displayed by physiotherapists in the UK. Therapists' skills, needs and frustrations using these resources were explored. With the relatively recent release and saturated use of the internet the potential presence of a skills gap between therapists at different stages of their career was also investigated. National online survey study. The online survey was carried out using the international online service 'Survey Monkey'. 774 physiotherapists from students to band 8c completed the survey. The online survey was advertised through Frontline, the Interactive Chartered Society of Physiotherapy, Journal of Physiotherapy Pain Association and cascade email through research and other networks. Most physiotherapists reported using the internet for professional purposes daily (40%) or 2 to 4 times a week (37%), with only 8% of respondents using it less than once a week. Overall the results suggest band 6 and 7 physiotherapists had the least skills and most frustrations when using online search engines. History and the nature of rapid technological advancement, specifically of the internet, appears to have created a generational skills gap within the largest group of the physiotherapy workforce band 6 and 7 therapists. Students, band 5 and band 8a therapists appear to most successfully use online resources and the reasons for this are explored. Copyright © 2012 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

QUASI-RANDOM TESTING OF COMPUTER SYSTEMS

Directory of Open Access Journals (Sweden)

S. V. Yarmolik

2013-01-01

Full Text Available Various modified random testing approaches have been proposed for computer system testing in the black box environment. Their effectiveness has been evaluated on the typical failure patterns by employing three measures, namely, P-measure, E-measure and F-measure. A quasi-random testing, being a modified version of the random testing, has been proposed and analyzed. The quasi-random Sobol sequences and modified Sobol sequences are used as the test patterns. Some new methods for Sobol sequence generation have been proposed and analyzed.

"Prime" Advertising Space: Measuring Implict Memory Online

OpenAIRE

Barratt, Madeleine

2012-01-01

In marketing literature, click-through-rates are generally employed to measure the success of banner advertisements online. This measure has led to the banner blindness hypothesis, which posits that internet users ignore banner advertisements. However, this measurement does not take into account the consumer action which may result from memory for advertised brands. This study illustrates that although there may not be explicit memory for these advertisements, consumers can be primed for adve...

Step-down switched-capacitor quasi-resonant PWM converter with continuous conversion ratio

NARCIS (Netherlands)

Turhan, M.; Hendrix, M.A.M.; Duarte, J.L.

2015-01-01

Inherent disadvantages of conventional switched-capacitor converters (SCC) are their discrete conversion ratio and inefficient energy transfer. In order to soften these downsides, a step-down switched-capacitor quasi-resonant PWM converter is proposed. The operation modes and steady-state

USING EYE TRACKING TO MEASURE ONLINE INTERACTIVITY: A THEORETICAL FRAMEWORK

Directory of Open Access Journals (Sweden)

Adriana-Emilia ROBU

2013-06-01

Full Text Available Notwithstanding that each and every company, even the sweetshop around the corner has found its way to the Internet, some customers still hesitate to shop online or to shop from one site and ignore the other. In order to build an online effective communication between the participants, one of the most important factors is interactivity. In the last decade it received extensive attention in the marketing literature, but few are the studies which have seen new methods to measure it. Eye tracking technology has been broadly used in the cognitive sciences. The purpose of this study is to investigate the existing literature in order to give insights into the eye tracking methodology when measuring the online interactivity. It also describes the eye tracking technology in general, extracts various examples from the eye tracking research field, with different applications, highlights its importance when analyzing the online consumer behavior, giving examples from various studies and finds the key points of the methodological difficulties. Finally, this work has an important merit for the future studies when taking into consideration the eye tracking technology in the online interactivity research and further, it is relevant for marketers, regarding the enhancement of online interactive interfaces and web or mobile applications.

Apodization Optimization of FBG Strain Sensor for Quasi-Distributed Sensing Measurement Applications

Directory of Open Access Journals (Sweden)

Fahd Chaoui

2016-01-01

Full Text Available A novel optimized apodization of Fiber Bragg Grating Sensor (FBGS for quasi-distributed strain sensing applications is developed and introduced in this paper. The main objective of the proposed optimization is to obtain a reflectivity level higher than 90% and a side lobe level around −40 dB, which is suitable for use in quasi-distributed strain sensing application. For this purpose, different design parameters as apodization profile, grating length, and refractive index have been investigated to enhance and optimize the FBGS design. The performance of the proposed apodization has then been compared in terms of reflectivity, side lobe level (SLL, and full width at half maximum (FWHM with apodization profiles proposed by other authors. The optimized sensor is integrated on quasi-distributed sensing system of 8 sensors demonstrating high reliability. Wide strain sensitivity range for each channel has also been achieved in the quasi-distributed system. Results prove the efficiency of the proposed optimization which can be further implemented for any quasi-distributed sensing application.

Evaluating the online platform of a blended-learning pharmacist continuing education degree program

OpenAIRE

Wilbur, Kerry

2016-01-01

Background: Distance-based continuing education opportunities are increasingly embraced by health professionals worldwide. Methods: To evaluate the online component of a blended-learning degree program for pharmacists, we conducted a structured self-assessment and peer review using an instrument systematically devised according to Moore’s principles of transactional distance. The web-based platform for 14 courses was reviewed by both local and external faculty, followed by shared reflecti...

The Effects of Online Homework on Achievement and Self-efficacy of College Algebra Students

OpenAIRE

Brewer, David Shane

2009-01-01

This study compared the effectiveness, in terms of mathematical achievement and mathematics self-efficacy, of online homework to textbook homework over an entire semester for 145 students enrolled in multiple sections of college algebra at a large community college. A quasi-experimental, posttest design was used to analyze the effect on mathematical achievement, as measured by a final exam. A pretest-posttest design was used to analyze the effect on mathematics self-efficacy, as measured by t...

I always feel like somebody's watching me measuring online behavioural advertising

OpenAIRE

Carrascosa, Juan Miguel; Mikians, Jakub; Cuevas, Ruben; Erramilli, Vijay; Laoutaris, Nikolaos

2015-01-01

Online Behavioural targeted Advertising (OBA) has risen in prominence as a method to increase the effectiveness of online advertising. OBA operates by associating tags or labels to users based on their online activity and then using these labels to target them. This rise has been accompanied by privacy concerns from researchers, regulators and the press. In this paper, we present a novel methodology for measuring and understanding OBA in the online advertising market. We rely on training arti...

Designing effective on-line continuing medical education.

Science.gov (United States)

Zimitat, Craig

2001-03-01

The Internet, and new information and communication technologies available through the Internet, provides medical educators with an opportunity to develop unique on-line learning environments with real potential to improve physicians' knowledge and effect change in their clinical practice. There are approximately 100 websites offering on-line CME courses in the USA alone. However, few of these CME courses appear to be based on sound educational principles or CME research and may have little chance of achieving the broader goals of CME. The majority of these courses closely resemble their traditional counterparts (e.g. paper-based books are now electronic books) and appear to be mere substitutions for old-technology CME resources. Whilst some CME providers add unique features of the Internet to enrich their websites, they do not employ strategies to optimize the learning opportunities afforded by this new technology. The adoption of adult learning principles, reflective practice and problem-based approaches can be used as a foundation for sound CME course design. In addition, knowledge of Internet technology and the learning opportunities it affords, together with strategies to maintain participation and new assessment paradigms, are all needed for developing online CME. We argue for an evidence-based and strategic approach to the development of on-line CME courses designed to enhance physician learning and facilitate change in clinical behaviour.

Online terahertz thickness measurement in films and coatings

Science.gov (United States)

Duling, Irl N.; White, Jeffrey S.

2017-02-01

Pulsed terahertz systems are currently being deployed for online process control and quality control of multi-layered products for use in the building products and aerospace industries. While many laboratory applications of terahertz can allow waveforms to be acquired at rates of 1 - 40 Hz, online applications require measurement rates of in excess of 100Hz. The existing technologies of thickness measurement (nuclear, x-ray, or laser gauges) have rates between 100 and 1000 Hz. At these rates, the single waveform bandwidth must still remain at 2THz or above to allow thinner layers to be measured. In the applications where terahertz can provide unique capability (e.g. multi-layer thickness, delamination, density) long-term stability must be guaranteed within the tolerance required by the measurement. This can mean multi-day stability of less than a micron. The software that runs on these systems must be flexible enough to allow multiple product configurations, while maintaining the simplicity required by plant operators. The final requirement is to have systems that can withstand the environmental conditions of the measurement. This might mean qualification in explosive environments, or operation in hot, wet or dusty environments. All of these requirements can put restrictions on not only the voltage of electronic circuitry used, but also the wavelength and optical power used for the transmitter and receiver. The application of terahertz systems to online process control presents unique challenges that not only effect the physical design of the system, but can also effect the choices made on the terahertz technology itself.

Monte Carlo aided treatments of the nonlinear inverse PGNAA measurement problem for various continuous on-line applications

International Nuclear Information System (INIS)

Gardner, R.P.; Guo, P.; Sood, A.; Mayo, C.W.; Dobbs, C.L.

1998-01-01

A review of our work on the application of the PGNAA method as applied to five industrial applications is given. Some introductory material is first given on the importance and use of Monte Carlo simulation in this area, some comments on the place of PGNAA in elemental analysis, and a brief description of the Monte Carlo - Library Least-Squares (MCLLS) approach to the nonlinear inverse PGNAA analysis problem. Then the applications of PGNAA are discussed for: (1) on-line bulk coal analysis, (2) nuclear oil well logging, (3) vitrified waste, (4) the analysis of sodium and aluminium in 'green liquor' in the presence of chlorine, and (5) the conveyor belt sorting of aluminum alloy samples. It is concluded that PGNAA is a rapidly emerging important new technology and measurement approach. (author)

Do online mental health services improve help-seeking for young people? A systematic review.

Science.gov (United States)

Kauer, Sylvia Deidre; Mangan, Cheryl; Sanci, Lena

2014-03-04

Young people regularly use online services to seek help and look for information about mental health problems. Yet little is known about the effects that online services have on mental health and whether these services facilitate help-seeking in young people. This systematic review investigates the effectiveness of online services in facilitating mental health help-seeking in young people. Using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, literature searches were conducted in PubMed, PsycINFO, and the Cochrane library. Out of 608 publications identified, 18 studies fulfilled the inclusion criteria of investigating online mental health services and help-seeking in young people aged 14-25 years. Two qualitative, 12 cross-sectional, one quasi-experimental, and three randomized controlled trials (RCTs) were reviewed. There was no change in help-seeking behavior found in the RCTs, while the quasi-experimental study found a slight but significant increase in help-seeking. The cross-sectional studies reported that online services facilitated seeking help from a professional source for an average of 35% of users. The majority of the studies included small sample sizes and a high proportion of young women. Help-seeking was often a secondary outcome, with only 22% (4/18) of studies using adequate measures of help-seeking. The majority of studies identified in this review were of low quality and likely to be biased. Across all studies, young people regularly used and were generally satisfied with online mental health resources. Facilitators and barriers to help-seeking were also identified. Few studies examine the effects of online services on mental health help-seeking. Further research is needed to determine whether online mental health services effectively facilitate help-seeking for young people.

Stratospheric Aerosol and Gas Experiment II measurements of the quasi-biennial oscillations in ozone and nitrogen dioxide

Science.gov (United States)

Zawodny, Joseph M.; Mccormick, M. P.

1991-01-01

The first measurements ever to show a quasi-biennial oscillation (QBO) in NO2 have been made by the Stratospheric Aerosol and Gas Experiment II) (SAGE II) and are presented in this work along with observations of the well-known QBO in stratospheric ozone. The SAGE II instrument was launched aboard the Earth Radiation Budget satellite near the end of 1984. Measurements of ozone and nitrogen dioxide through early 1990 are analyzed for the presence of a quasi-biennial oscillation. The measurements show the global extent of both the O3 and NO2 QBO in the 25- to 40-km region of the stratosphere. The SAGE II QBO results for ozone compare favorably to theory and previous measurements. The QBO in NO2 is found to be consistent with the vertical and horizontal transport of NOy. Both species exhibit a QBO at extratropical latitudes consistent with strong meridional transport into the winter hemisphere.

Using an intervention mapping framework to develop an online mental health continuing education program for pharmacy staff.

Science.gov (United States)

Wheeler, Amanda; Fowler, Jane; Hattingh, Laetitia

2013-01-01

Current mental health policy in Australia recognizes that ongoing mental health workforce development is crucial to mental health care reform. Community pharmacy staff are well placed to assist people with mental illness living in the community; however, staff require the knowledge and skills to do this competently and effectively. This article presents the systematic planning and development process and content of an education and training program for community pharmacy staff, using a program planning approach called intervention mapping. The intervention mapping framework was used to guide development of an online continuing education program. Interviews with mental health consumers and carers (n = 285) and key stakeholders (n = 15), and a survey of pharmacy staff (n = 504) informed the needs assessment. Program objectives were identified specifying required attitudes, knowledge, skills, and confidence. These objectives were aligned with an education technique and delivery strategy. This was followed by development of an education program and comprehensive evaluation plan. The program was piloted face to face with 24 participants and then translated into an online program comprising eight 30-minute modules for pharmacists, 4 of which were also used for support staff. The evaluation plan provided for online participants (n ≅ 500) to be randomized into intervention (immediate access) or control groups (delayed training access). It included pre- and posttraining questionnaires and a reflective learning questionnaire for pharmacy staff and telephone interviews post pharmacy visit for consumers and carers. An online education program was developed to address mental health knowledge, attitudes, confidence, and skills required by pharmacy staff to work effectively with mental health consumers and carers. Intervention mapping provides a systematic and rigorous approach that can be used to develop a quality continuing education program for the health workforce

Time-resolved SAXS measurements facilitated by online HPLC buffer exchange

DEFF Research Database (Denmark)

Jensen, Malene Hillerup; Toft, Katrine Nørgaard; David, Gabriel

2010-01-01

continuous or stopped flow. In this paper a method for obtaining TR-SAXS data from systems where the reaction is triggered by removal of a species is presented. This method is based on fast buffer exchange over a short desalting column facilitated by an online HPLC (high-performance liquid chromatography...

The design, marketing, and implementation of online continuing education about computers and nursing informatics.

Science.gov (United States)

Sweeney, Nancy M; Saarmann, Lembi; Seidman, Robert; Flagg, Joan

2006-01-01

Asynchronous online tutorials using PowerPoint slides with accompanying audio to teach practicing nurses about computers and nursing informatics were designed for this project, which awarded free continuing education units to completers. Participants had control over the advancement of slides, with the ability to repeat when desired. Graphics were kept to a minimum; thus, the program ran smoothly on computers using dial-up modems. The tutorials were marketed in live meetings and through e-mail messages on nursing listservs. Findings include that the enrollment process must be automated and instantaneous, the program must work from every type of computer and Internet connection, marketing should be live and electronic, and workshops should be offered to familiarize nurses with the online learning system.

Quasi-quadrature interferometer for plasma density radial profile measurements

International Nuclear Information System (INIS)

Lowenthal, D.D.; Hoffman, A.L.

1979-01-01

A cw Mach Zehnder multichannel interferometer has been developed to measure time-dependent fractional fringe shifts with an accuracy of one-fortieth fringe. The design is quasi-quadrature in that known phase shifts, introduced in the reference beam, are time multiplexed with the normal reference beam. This technique requires only one detector per interferometer channel as compared to two detectors for most quadrature designs. The quadrature information makes the sense of density changes unambiguous, it automatically calibrates the instrument during the plasma event, and it makes fringe shift measurements virtually independent of fringe contrast fluctuations caused by plasma refractive and/or absorptive effects. The interferometer optical design is novel in that the electro-optic crystal used to introduce the 90 0 phase shifts is located in the common 2-mm-diam HeNe entrance beam to the interferometer, by exploiting polarization techniques, rather than in the expanded 1--2-cm reference beam itself. This arrangement greatly reduces the size, cost, and high-voltage requirements for the phase modulating crystal

On-line measurement of mechanical, optical properties and roughness parameters

Directory of Open Access Journals (Sweden)

Hartman, H.

2005-12-01

Full Text Available On-line measurements become a central importance for the control of production line output. The target is to replace traditional single local destructive quality checks by a continuous survey of the product properties. Other traditional like pyrometric temperature measurements suffer of well-known but non-soluble weakness points. New methods need the unambiguous correlation with the results of traditional testing to be representative for valid proof standards.EKO Stahl GmbH introduces several methods of on-line measurements focused actually on temperature measurement means of FTIR-Spectrometer, prediction of the mechanical properties of steel strips using the information of residual magnetization after a magnetization pulse and optical roughness measurements. The correlation between the results of the new methods and the classical proof processes has been established in a satisfactory manner.

Las medidas on line van tomando una importancia central para el control de la calidad de la producción . El objetivo es reemplazar las pruebas destructivas puntuales tradicionales por un control continuo de las características del producto. Otros métodos tradicionales, como la medida de la temperatura con pirómetros, adolecen de conocidos pero insolubles puntos débiles. Los nuevos métodos necesitan la correlación inequívoca con los resultados de los métodos corrientes clásicos para obtener la autoridad de un estándar de prueba. La EKO Stahl GmbH ha introducido varios métodos de medidas on line y actualmente concentrados en la medida de la temperatura con espectrómetro FTIR, predicción de las características mecánicas usando la información del magnetismo residual, a partir de un impulso magnético inicial así como la medida óptica de la rugosidad. La correlación entre los resultados de los nuevos métodos y los métodos clásicos ha quedado establecida de manera satisfactoria.

Optimization of process parameters for a quasi-continuous tablet coating system using design of experiments.

Science.gov (United States)

Cahyadi, Christine; Heng, Paul Wan Sia; Chan, Lai Wah

2011-03-01

The aim of this study was to identify and optimize the critical process parameters of the newly developed Supercell quasi-continuous coater for optimal tablet coat quality. Design of experiments, aided by multivariate analysis techniques, was used to quantify the effects of various coating process conditions and their interactions on the quality of film-coated tablets. The process parameters varied included batch size, inlet temperature, atomizing pressure, plenum pressure, spray rate and coating level. An initial screening stage was carried out using a 2(6-1(IV)) fractional factorial design. Following these preliminary experiments, optimization study was carried out using the Box-Behnken design. Main response variables measured included drug-loading efficiency, coat thickness variation, and the extent of tablet damage. Apparent optimum conditions were determined by using response surface plots. The process parameters exerted various effects on the different response variables. Hence, trade-offs between individual optima were necessary to obtain the best compromised set of conditions. The adequacy of the optimized process conditions in meeting the combined goals for all responses was indicated by the composite desirability value. By using response surface methodology and optimization, coating conditions which produced coated tablets of high drug-loading efficiency, low incidences of tablet damage and low coat thickness variation were defined. Optimal conditions were found to vary over a large spectrum when different responses were considered. Changes in processing parameters across the design space did not result in drastic changes to coat quality, thereby demonstrating robustness in the Supercell coating process. © 2010 American Association of Pharmaceutical Scientists

Improving integrity of on-line grammage measurement with traceable basic calibration.

Science.gov (United States)

Kangasrääsiö, Juha

2010-07-01

The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all beta-radiation based grammage measurements. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Defining quality criteria for online continuing medical education modules using modified nominal group technique.

Science.gov (United States)

Shortt, S E D; Guillemette, Jean-Marc; Duncan, Anne Marie; Kirby, Frances

2010-01-01

The rapid increase in the use of the Internet for continuing education by physicians suggests the need to define quality criteria for accredited online modules. Continuing medical education (CME) directors from Canadian medical schools and academic researchers participated in a consensus process, Modified Nominal Group Technique, to develop agreement on the most important quality criteria to guide module development. Rankings were compared to responses to a survey of a subset of Canadian Medical Association (CMA) members. A list of 17 items was developed, of which 10 were deemed by experts to be important and 7 were considered secondary. A quality module would: be needs-based; presented in a clinical format; utilize evidence-based information; permit interaction with content and experts; facilitate and attempt to document practice change; be accessible for later review; and include a robust course evaluation. There was less agreement among CMA members on criteria ranking, with consensus on ranking reached on only 12 of 17 items. In contrast to experts, members agreed that the need to assess performance change as a result of an educational experience was not important. This project identified 10 quality criteria for accredited online CME modules that representatives of Canadian organizations involved in continuing education believe should be taken into account when developing learning products. The lack of practitioner support for documentation of change in clinical behavior may suggest that they favor traditional attendance- or completion-based CME; this finding requires further research.

Continuous Real-time Measurements of Vertical Distribution of Magnetic Susceptibility In Soils

Science.gov (United States)

Petrovsky, E.; Hulka, Z.; Kapicka, A.; Magprox Team

Measurements of top-soil magnetic susceptibility are used in approximative outlining polluted areas. However, one of the serious limitations of the method is discrimina- tion between top-soil layers enhanced by atmospherically deposited anthropogenic particles from those dominated by natural particles migrating from magnetically-rich basement rocks. For this purpose, measurements of vertical distribution of magnetic susceptibility along soil profiles is one of the most effective ways in estimating the effect of lithogenic contribution. Up to now, in most cases soil cores have to be mea- sured in laboratory. This method is quite time consuming and does not allow flexible decision about the suitability of the measured site for surface magnetic mapping. In our contribution we will present a new device enabling continuous real-time measure- ments of vertical distribution of magnetic susceptibility directly in field, performed in holes after soil coring. The method is fast, yielding smooth curves (6 data points per 1 mm dept), at least as sensitive as laboratory methods available until now, and at- tached notebook enables direct, on-line control of the lithogenic versus anthropogenic contributions.

Measuring business continuity programmes in large organisations.

Science.gov (United States)

Green, Christopher

2014-01-01

In the field of business continuity management, organisations commit sums of money (often very large sums) to develop and maintain their continuity capability. Despite this, there is almost no measurement of whether this expense offers value for money, or whether it is targeted in the right areas. This paper will explain some methods of measuring components of a business continuity programme. The important outputs from this measurement activity are to demonstrate that an organisation's continuity capability is improving over time, and to identify areas of weakness that should be targeted during future work.

Measurement of turbulent diffusivity of both gas and liquid phases in quasi-2D two-phase flow

International Nuclear Information System (INIS)

Sato, Yoshifusa; Sadatomi, Michio; Kawahara, Akimaro

1993-01-01

The turbulent diffusion process has been studied experimentally by observing a tracer plume emitted continuously from a line source in a uniform, quasi-2D two-phase flow. The test section was a vertical, relatively narrow, concentric annular channel consisting of two large pipes. Air and water were used as the working fluids, and methane and acid organge II were used as tracers for the respective phases. Measurements of local, time-averaged tracer concentrations were made by means of a sampling method and image processing for bubbly flows and churn flows, and the turbulent diffusivity, the coefficient of turbulent diffusion, was determined from the concentration distributions measured. The diffusivities for the gas and liquid phases, ε DG and ε DL respectively, are presented and compared with each other in this paper. When a flow is bubbly, ε DG is close to or slightly smaller than ε DL . In a churn flow, on the contrary, ε DG is much greater than ε DL . Regarding bubbly flow, a plausible model on turbulent diffusivity of the liquid phase is presented and examined by the present data. (orig.)

Quasi-elastic Scattering Measurements in the 6,7Li+144Sm Systems

International Nuclear Information System (INIS)

Capurro, O. A.; Arazi, A.; Fernandez Niello, J. O.; Figueira, J. M.; Marti, G. V.; Martinez Heimann, D.; Negri, A. E.; Pacheco, A. J.; Monteiro, D. S.; Otomar, D. R.; Gomes, P. R. S.; Guimaraes, V.

2009-01-01

In the present work, results of measurements of quasi-elastic scattering cross sections using a silicon-telescope detector at backward angles are reported. They allowed us to deduce fusion barrier distributions from the first derivative of the corresponding excitation function (-d(dσ qes /dσ Rut )/dE). We report data for the systems 6,7 Li on 144 Sm which are characterized by loosely bound projectiles onto a closed neutron shell target. The experimental excitation functions and the associated barrier distributions are compared for both systems.

Continuous Improvement in Online Education: Documenting Teaching Effectiveness in the Online Environment through Observations

Science.gov (United States)

Purcell, Jennifer W.; Scott, Heather I.; Mixson-Brookshire, Deborah

2017-01-01

Teaching observations are commonly used among educators to document and improve teaching effectiveness. Unfortunately, the necessary protocols and supporting infrastructure are not consistently available for faculty who teach online. This paper presents a brief literature review and reflective narratives of educators representing online education…

Quasi-Y-source inverter

DEFF Research Database (Denmark)

Siwakoti, Yam Prasad; Blaabjerg, Frede; Loh, Poh Chiang

2015-01-01

This paper introduces a new inverter topology called a “quasi-Y-source inverter”. The proposed inverter inherits all the advantages of the original Y-source inverter. In addition, the new topology draws continuous current from the source which is required for many renewable sources. It also has dc......-current-blocking capacitors, which avoids saturation in the transformer core. Simulations and experimental results have proved the validity of the proposed inverter....

Online Continuing Education for Expanding Clinicians' Roles in Breastfeeding Support.

Science.gov (United States)

Edwards, Roger A; Colchamiro, Rachel; Tolan, Ellen; Browne, Susan; Foley, Mary; Jenkins, Lucia; Mainello, Kristen; Vallu, Rohith; Hanley, Lauren E; Boisvert, Mary Ellen; Forgit, Julie; Ghiringhelli, Kara; Nordstrom, Christina

2015-11-01

Lack of health professional support is an important variable affecting mothers' achievement of breastfeeding goals. Online continuing education is a recognized pathway for disseminating content for improving clinicians' knowledge and supporting efforts to change practices. At the time we developed our project, free, accredited continuing education for physicians related to breastfeeding management that could be easily accessed using portable devices (via tablets/smartphones) was not available. Such resources were in demand, especially for facilities pursuing designation through the Baby-Friendly Hospital Initiative. We assembled a government, academic, health care provider, and professional society partnership to create such a tutorial that would address the diverse content needed for supporting breastfeeding mothers postdischarge in the United States. Our 1.5-hour-long continuing medical and nursing education was completed by 1606 clinicians (1172 nurses [73%] and 434 physicians [27%]) within 1 year. More than 90% of nurses and over 98% of physicians said the tutorial achieved its 7 learning objectives related to breastfeeding physiology, broader factors in infant feeding decisions and practices, the American Academy of Pediatrics' policy statement, and breastfeeding management/troubleshooting. Feedback received from the tutorial led to the creation of a second tutorial consisting of another 1.5 hours of continuing medical and nursing education related to breast examination and assessment prior to delivery, provision of anticipatory guidance to pregnant women interested in breastfeeding, maternity care practices that influence breastfeeding outcomes, breastfeeding preterm infants, breastfeeding's role in helping address disparities, and dispelling common myths. The tutorials contribute to achievement of 8 Healthy People 2020 Maternal, Infant and Child Health objectives. © The Author(s) 2015.

Reactor Network Synthesis Using Coupled Genetic Algorithm with the Quasi-linear Programming Method

OpenAIRE

Soltani, H.; Shafiei, S.; Edraki, J.

2016-01-01

This research is an attempt to develop a new procedure for the synthesis of reactor networks (RNs) using a genetic algorithm (GA) coupled with the quasi-linear programming (LP) method. The GA is used to produce structural configuration, whereas continuous variables are handled using a quasi-LP formulation for finding the best objective function. Quasi-LP consists of LP together with a search loop to find the best reactor conversions (xi), as well as split and recycle ratios (yi). Quasi-LP rep...

Surface flatness measurement of quasi-parallel plates employing three-beam interference with strong reference beam

Science.gov (United States)

Sunderland, Zofia; Patorski, Krzysztof

2016-12-01

A big challenge for standard interferogram analysis methods such as Temporal Phase Shifting or Fourier Transform is a parasitic set of fringes which might occur in the analyzed fringe pattern intensity distribution. It is encountered, for example, when transparent glass plates with quasi-parallel surfaces are tested in Fizeau or Twyman-Green interferometers. Besides the beams reflected from the plate front surface and the interferometer reference the beam reflected from the plate rear surface also plays important role; its amplitude is comparable with the amplitude of other beams. In result we face three families of fringes of high contrast which cannot be easily separated. Earlier we proposed a competitive solution for flatness measurements which relies on eliminating one of those fringe sets from the three-beam interferogram and separating two remaining ones with the use of 2D Continuous Wavelet Transform. In this work we cover the case when the intensity of the reference beam is significantly higher than the intensities of two object beams. The main advantage of differentiating beam intensities is the change in contrast of individual fringe families. Processing of such three-beam interferograms is modified but also takes advantage of 2D CWT. We show how to implement this method in Twyman-Green and Fizeau setups and compare this processing path and measurement procedures with previously proposed solutions.

Optimized Quasi-Interpolators for Image Reconstruction.

Science.gov (United States)

Sacht, Leonardo; Nehab, Diego

2015-12-01

We propose new quasi-interpolators for the continuous reconstruction of sampled images, combining a narrowly supported piecewise-polynomial kernel and an efficient digital filter. In other words, our quasi-interpolators fit within the generalized sampling framework and are straightforward to use. We go against standard practice and optimize for approximation quality over the entire Nyquist range, rather than focusing exclusively on the asymptotic behavior as the sample spacing goes to zero. In contrast to previous work, we jointly optimize with respect to all degrees of freedom available in both the kernel and the digital filter. We consider linear, quadratic, and cubic schemes, offering different tradeoffs between quality and computational cost. Experiments with compounded rotations and translations over a range of input images confirm that, due to the additional degrees of freedom and the more realistic objective function, our new quasi-interpolators perform better than the state of the art, at a similar computational cost.

Continuous monitoring of bisulfide variation in microdialysis effluents by on-line droplet-based microfluidic fluorescent sensor.

Science.gov (United States)

Zhu, Xiaocui; Xu, Lei; Wu, Tongbo; Xu, Anqin; Zhao, Meiping; Liu, Shaorong

2014-05-15

We demonstrate a novel fluorescent sensor for real-time and continuous monitoring of the variation of bisulfide in microdialysis effluents by using a nanoparticle-glutathione-fluorescein isothiocyanate (AuNP-GSH-FITC) probe coupled with on-line droplet-based microfluidic chip. The AuNP-GSH-FITC fluorescent probe was firstly developed and used for bisulfide detection in bulk solution by quantitative real-time PCR, which achieved a linear working range from 0.1 μM to 5.0 μM and a limit of detection of ~50 nM. The response time was less than 2 min. With the aid of co-immobilized thiol-polyethylene glycol, the probe exhibited excellent stability and reproducibility in high salinity solutions, including artificial cerebrospinal fluids (aCSF). By adding 0.1% glyoxal to the probe solution, the assay allowed quantification of bisulfide in the presence of cysteine at the micro-molarity level. Using the AuNP-GSH-FITC probe, a droplet-based microfluidic fluorescent sensor was further constructed for online monitoring of bisulfide variation in the effluent of microdialysis. By using fluorescence microscope-charge-coupled device camera as the detector, the integrated microdialysis/microfluidic chip device achieved a detection limit of 2.0 μM and a linear response from 5.0 μM to 50 μM for bisulfide in the tested sample. The method was successfully applied for the on-line measurement of bisulfide variation in aCSF and serum samples. It will be a very useful tool for tracking the variation of bisulfide or hydrogen sulfide in extracellular fluids. Copyright © 2013 Elsevier B.V. All rights reserved.

Antihysteresis of perceived longitudinal body axis during continuous quasi-static whole-body rotation in the earth-vertical roll plane.

Science.gov (United States)

Tatalias, M; Bockisch, C J; Bertolini, G; Straumann, D; Palla, A

2011-03-01

Estimation of subjective whole-body tilt in stationary roll positions after rapid rotations shows hysteresis. We asked whether this phenomenon is also present during continuous quasi-static whole-body rotation and whether gravitational cues are a major contributing factor. Using a motorized turntable, 8 healthy subjects were rotated continuously about the earth-horizontal naso-occipital axis (earth-vertical roll plane) and the earth-vertical naso-occipital axis (earth-horizontal roll plane). In both planes, three full constant velocity rotations (2°/s) were completed in clockwise and counterclockwise directions (acceleration = 0.05°/s(2), velocity plateau reached after 40 s). Subjects adjusted a visual line along the perceived longitudinal body axis (pLBA) every 2 s. pLBA deviation from the longitudinal body axis was plotted as a function of whole-body roll position, and a sine function was fitted. At identical whole-body earth-vertical roll plane positions, pLBA differed depending on whether the position was reached by a rotation from upright or by passing through upside down. After the first 360° rotation, pLBA at upright whole-body position deviated significantly in the direction of rotation relative to pLBA prior to rotation initiation. This deviation remained unchanged after subsequent full rotations. In contrast, earth-horizontal roll plane rotations resulted in similar pLBA before and after each rotation cycle. We conclude that the deviation of pLBA in the direction of rotation during quasi-static earth-vertical roll plane rotations reflects static antihysteresis and might be a consequence of the known static hysteresis of ocular counterroll: a visual line that is perceived that earth-vertical is expected to be antihysteretic, if ocular torsion is hysteretic.

On-line fresh-cut lettuce quality measurement system using hyperspectral imaging

Science.gov (United States)

Lettuce, which is a main type of fresh-cut vegetable, has been used in various fresh-cut products. In this study, an online quality measurement system for detecting foreign substances on the fresh-cut lettuce was developed using hyperspectral reflectance imaging. The online detection system with a s...

Teorema Titik Tetap Pada Ruang Quasi Metrik Terasing Tanpa Menggunakan Sifat Kekontinuan Fungsi

Directory of Open Access Journals (Sweden)

Malahayati Malahayati

2014-04-01

Full Text Available Dislocated quasi metric spaces is spaces with distance function that only satisfies two conditions from four conditions of distance function in metric spaces. Every metric spaces is dislocated quasi metric spaces, but the convers not satifies, so the characters that satisfies in metric spaces may not satisfies in dislocated quasi metric spaces.  This paper is to recite fixed point theorems without continuity of any mapping in dislocated quasi metric spaces, also gives an example using the theorems that has recited

Don't forget the learner: an essential aspect for developing effective hypermedia online learning in continuing medical education.

Science.gov (United States)

Sandars, John; Homer, Matthew; Walsh, Kieran; Rutherford, Alaster

2012-03-01

There is increasing use of hypermedia online learning in continuing medical education (CME) that presents the learner with a wide range of different learning resources, requiring the learner to use self-regulated learning (SRL) skills. This study is the first to apply an SRL perspective to understand how learners engage with hypermedia online learning in CME. We found that the main SRL skills used by learners were use of strategies and monitoring. The increasing use of strategies was associated with increasing interest in the topic and with increasing satisfaction with the learning experience. Further research is recommended to understand SRL processes and its impact on learning in other aspects of hypermedia online learning across the different phases of medical education. Research is also recommended to implement and evaluate the learning impact of a variety of approaches to develop the SRL skills of hypermedia online learners in CME.

On Gap Functions for Quasi-Variational Inequalities

Directory of Open Access Journals (Sweden)

Kouichi Taji

2008-01-01

Full Text Available For variational inequalities, various merit functions, such as the gap function, the regularized gap function, the D-gap function and so on, have been proposed. These functions lead to equivalent optimization formulations and are used to optimization-based methods for solving variational inequalities. In this paper, we extend the regularized gap function and the D-gap functions for a quasi-variational inequality, which is a generalization of the variational inequality and is used to formulate generalized equilibrium problems. These extensions are shown to formulate equivalent optimization problems for quasi-variational inequalities and are shown to be continuous and directionally differentiable.

Impact of Cost-Sharing Increases on Continuity of Specialty Drug Use: A Quasi-Experimental Study.

Science.gov (United States)

Li, Pengxiang; Hu, Tianyan; Yu, Xinyan; Chahin, Salim; Dahodwala, Nabila; Blum, Marissa; Pettit, Amy R; Doshi, Jalpa A

2017-07-24

To examine the impact of cost-sharing increases on continuity of specialty drug use in Medicare beneficiaries with multiple sclerosis (MS) or rheumatoid arthritis (RA). Five percent Medicare claims data (2007-2010). Quasi-experimental study examining changes in specialty drug use among a group of Medicare Part D beneficiaries without low-income subsidies (non-LIS) as they transitioned from a 5 percent cost-sharing preperiod to a ≥25 percent cost-sharing postperiod, as compared to changes among a disease-matched contemporaneous control group of patients eligible for full low-income subsidies (LIS), who faced minor cost sharing (≤$6.30 copayment) in both the pre- and postperiods. Key variables were extracted from Medicare data. Relative to the LIS group, the non-LIS group had a greater increase in incidence of 30-day continuous gaps in any Part D treatment from the lower cost-sharing period to the higher cost-sharing period (MS, absolute increase = 10.1 percent, OR = 1.61, 95% CI 1.19-2.17; RA, absolute increase = 21.9 percent, OR = 2.75, 95% CI 2.15-3.51). The increase in Part D treatment gaps was not offset by increased Part B specialty drug use. Cost-sharing increases due to specialty tier-level cost sharing were associated with interruptions in MS and RA specialty drug treatments. © Health Research and Educational Trust.

Online and offline video game use in adolescents: measurement invariance and problem severity.

Science.gov (United States)

Smohai, Máté; Urbán, Róbert; Griffiths, Mark D; Király, Orsolya; Mirnics, Zsuzsanna; Vargha, András; Demetrovics, Zsolt

2017-01-01

Despite the increasing popularity of video game playing, little is known about the similarities and differences between online and offline video game players. The aims of this study were (i) to test the applicability and the measurement invariance of the previously developed Problematic Online Gaming Questionnaire (POGQ) in both online and offline gamers and to (ii) examine the differences in these groups. Video game use habits and POGQ were assessed in a sample of 1,964 (71% male) adolescent videogame players. Those gamers who played at least sometimes in an online context were considered "online gamers," while those who played videogames exclusively offline were considered "offline gamers." Confirmatory factor analysis supported the measurement invariance across online and offline videogame players. According to the multiple indicators multiple causes (MIMIC) model, online gamers were more likely to score higher on overuse, interpersonal conflict, and social isolation subscales of the POGQ. The results of the present study suggest that online and offline gaming can be assessed using the same psychometric instrument. These findings open the possibility for future research studies concerning problematic video gaming to include participants who exclusively play online or offline games, or both. However, the study also identified important structural features about how online and offline gaming might contribute differently to problematic use. These results provide important information that could be utilized in parental education and the prevention program about the possible detrimental consequences of online vs. offline video gaming.

Context-invariant quasi hidden variable (qHV) modelling of all joint von Neumann measurements for an arbitrary Hilbert space

International Nuclear Information System (INIS)

Loubenets, Elena R.

2015-01-01

We prove the existence for each Hilbert space of the two new quasi hidden variable (qHV) models, statistically noncontextual and context-invariant, reproducing all the von Neumann joint probabilities via non-negative values of real-valued measures and all the quantum product expectations—via the qHV (classical-like) average of the product of the corresponding random variables. In a context-invariant model, a quantum observable X can be represented by a variety of random variables satisfying the functional condition required in quantum foundations but each of these random variables equivalently models X under all joint von Neumann measurements, regardless of their contexts. The proved existence of this model negates the general opinion that, in terms of random variables, the Hilbert space description of all the joint von Neumann measurements for dimH≥3 can be reproduced only contextually. The existence of a statistically noncontextual qHV model, in particular, implies that every N-partite quantum state admits a local quasi hidden variable model introduced in Loubenets [J. Math. Phys. 53, 022201 (2012)]. The new results of the present paper point also to the generality of the quasi-classical probability model proposed in Loubenets [J. Phys. A: Math. Theor. 45, 185306 (2012)

Online Solution of Two-Player Zero-Sum Games for Continuous-Time Nonlinear Systems With Completely Unknown Dynamics.

Science.gov (United States)

Fu, Yue; Chai, Tianyou

2016-12-01

Regarding two-player zero-sum games of continuous-time nonlinear systems with completely unknown dynamics, this paper presents an online adaptive algorithm for learning the Nash equilibrium solution, i.e., the optimal policy pair. First, for known systems, the simultaneous policy updating algorithm (SPUA) is reviewed. A new analytical method to prove the convergence is presented. Then, based on the SPUA, without using a priori knowledge of any system dynamics, an online algorithm is proposed to simultaneously learn in real time either the minimal nonnegative solution of the Hamilton-Jacobi-Isaacs (HJI) equation or the generalized algebraic Riccati equation for linear systems as a special case, along with the optimal policy pair. The approximate solution to the HJI equation and the admissible policy pair is reexpressed by the approximation theorem. The unknown constants or weights of each are identified simultaneously by resorting to the recursive least square method. The convergence of the online algorithm to the optimal solutions is provided. A practical online algorithm is also developed. Simulation results illustrate the effectiveness of the proposed method.

Ion conducting behavior in secondary battery materials detected by quasi-elastic neutron scattering measurements

International Nuclear Information System (INIS)

Nozaki, Hiroshi

2014-01-01

Ionic conducting behaviors in secondary battery materials, i.e. cathode and solid electrolyte, were studied with quasi-elastic neutron scattering (QENS) measurements. Although the incoherent scattering length for Li and Na is lower by two orders of magnitude than that for H, the QENS spectra were clearly detected using the combination of an intense neutron source and a low background spectrometer. The fundamental parameters, such as, the activation energy, the jump distance, and the diffusion coefficient were obtained by analyzing QENS spectra. These parameters are consistent with the previous results estimated by muon-spin relaxation (μSR) measurements and first principles calculations. (author)

Virtual continuity of measurable functions and its applications

Science.gov (United States)

Vershik, A. M.; Zatitskii, P. B.; Petrov, F. V.

2014-12-01

A classical theorem of Luzin states that a measurable function of one real variable is `almost' continuous. For measurable functions of several variables the analogous statement (continuity on a product of sets having almost full measure) does not hold in general. The search for a correct analogue of Luzin's theorem leads to a notion of virtually continuous functions of several variables. This apparently new notion implicitly appears in the statements of embedding theorems and trace theorems for Sobolev spaces. In fact it reveals the nature of such theorems as statements about virtual continuity. The authors' results imply that under the conditions of Sobolev theorems there is a well-defined integration of a function with respect to a wide class of singular measures, including measures concentrated on submanifolds. The notion of virtual continuity is also used for the classification of measurable functions of several variables and in some questions on dynamical systems, the theory of polymorphisms, and bistochastic measures. In this paper the necessary definitions and properties of admissible metrics are recalled, several definitions of virtual continuity are given, and some applications are discussed. Bibliography: 24 titles.

Measurement of the parity violation in quasi-elastic electroweak electron-scattering from 9Be

International Nuclear Information System (INIS)

Achenbach, W.; Andresen, H.G.

1987-01-01

Measurement of the Parity Violation in Quasi-Elastic Electroweak Electron-Scattering from 9 Be in the energy range of about 300 MeV is fulfilled. The measurement of the parity violating asymmetry is obtained by a comparison of scattering for a + helicity beam to that for a - helicity beams. To permit a meaningful comparison required that the + helicity and the - helicity beams being identical in all other respects. Measurements at different energies and targets (hydrogen, deuterium) in the medium energy region will allow to determine α, β, γ, δ in a model-independent way. Regarding future experiments at the Mainz microtron cw accelerator, coincidence experiments will open new experimental possibilities for large solid angle detector systems

Online continuing medical education as a key link for successful noncommunicable disease self-management: the CASALUD™ Model

Directory of Open Access Journals (Sweden)

Gallardo-Rincón H

2017-10-01

Full Text Available Héctor Gallardo-Rincón,1 Rodrigo Saucedo-Martínez,1 Ricardo Mujica-Rosales,1 Evan M Lee,2 Amy Israel,2 Braulio Torres-Beltran,3 Úrsula Quijano-González,3 Elena Rose Atkinson,3 Pablo Kuri-Morales,4 Roberto Tapia-Conyer1 1Fundación Carlos Slim, Mexico City, Mexico; 2Lilly Global Health, Eli Lilly and Company, Vernier, Switzerland; 3C230 Consultores, Mexico City, Mexico; 4Mexican Ministry of Health, Mexico City, Mexico Purpose: The purpose of this study is to evaluate how the benefits of online continuing medical education (CME provided to health care professionals traveled along a patient “educational chain”. In this study, the educational chain begins with the influence that CME can have on the quality of health care, with subsequent influence on patient knowledge, disease self-management, and disease biomarkers. Methods: A total of 422 patients with at least one noncommunicable disease (NCD treated in eight different Mexican public health clinics were followed over 3 years. All clinics were participants in the CASALUD Model, an NCD care model for primary care, where all clinic staff were offered CME. Data were collected through a questionnaire on health care, patient disease knowledge, and self-management behaviors; blood samples and anthropometric measurements were collected to measure patient disease biomarkers. Results: Between 2013 and 2015, the indexes measuring quality of health care, patient health knowledge, and diabetes self-management activities rose moderately but significantly (from 0.54 to 0.64, 0.80 to 0.84, and 0.62 to 0.67, respectively. Performing self-care activities – including owning and using a glucometer and belonging to a disease support group – saw the highest increase (from 0.65 to 0.75. A1C levels increased between 2013 and 2015 from 7.95 to 8.41% (63–68 mmol/mol (P<0.001, and blood pressure decreased between 2014 and 2015 from 143.7/76.8 to 137.5/74.4 (systolic/diastolic reported in mmHg (P<0

Online and offline video game use in adolescents: measurement invariance and problem severity

OpenAIRE

Smohai, M; Urbán, R; Griffiths, MD; Király, O; Mirnics, Z; Vargha, A; Demetrovics, Z

2017-01-01

Background:\\ud \\ud Despite the increasing popularity of videogame playing, little is known about the similarities and differences between online and offline videogame players. However, the characteristics of online and offline gaming might predispose different pattern of problematic use.\\ud \\ud Objectives:\\ud \\ud The aims of this study were to (i) test applicability and the measurement invariance of the previously developed Problematic Online Gaming Questionnaire (POGQ) in both online and off...

Marketing to increase participation in a Web-based continuing medical education cultural competence curriculum.

Science.gov (United States)

Estrada, Carlos A; Krishnamoorthy, Periyakaruppan; Smith, Ann; Staton, Lisa; Korf, Michele J; Allison, Jeroan J; Houston, Thomas K

2011-01-01

CME providers may be interested in identifying effective marketing strategies to direct users to specific content. Online advertisements for recruiting participants into activities such as clinical trials, public health programs, and continuing medical education (CME) have been effective in some but not all studies. The purpose of this study was to compare the impact of 2 marketing strategies in the context of an online CME cultural competence curriculum (www.c-comp.org). In an interrupted time-series quasi-experimental design, 2 marketing strategies were tested: (1) wide dissemination to relevant organizations over a period of approximately 4 months, and (2) Internet paid search using Google Ads (5 consecutive 8-week periods--control 1, cultural/CME advertisement, control 2, hypertension/ content advertisement, control 3). Outcome measures were CME credit requests, Web traffic (visits per day, page views, pages viewed per visit), and cost. Overall, the site was visited 19,156 times and 78,160 pages were viewed. During the wide dissemination phase, the proportion of visits requesting CME credit decreased between the first (5.3%) and second (3.3%) halves of this phase (p = .04). During the Internet paid search phase, the proportion of visits requesting CME credit was highest during the cultural/CME advertisement period (control 1, 1.4%; cultural/CME ad, 4.3%; control 2, 1.5%; hypertension/content ad, 0.6%; control 3, 0.8%; p advertisement periods. The incremental cost for the cultural advertisement per CME credit requested was US $0.64. Internet advertisement focusing on cultural competence and CME was associated with about a threefold increase in requests for CME credit at an incremental cost of under US $1; however, Web traffic changes were independent of the advertisement strategy. Copyright © 2011 The Alliance for Continuing Medical Education, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical

Entropy method of measuring and evaluating periodicity of quasi-periodic trajectories

Science.gov (United States)

Ni, Yanshuo; Turitsyn, Konstantin; Baoyin, Hexi; Junfeng, Li

2018-06-01

This paper presents a method for measuring the periodicity of quasi-periodic trajectories by applying discrete Fourier transform (DFT) to the trajectories and analyzing the frequency domain within the concept of entropy. Having introduced the concept of entropy, analytical derivation and numerical results indicate that entropies increase as a logarithmic function of time. Periodic trajectories typically have higher entropies, and trajectories with higher entropies mean the periodicities of the motions are stronger. Theoretical differences between two trajectories expressed as summations of trigonometric functions are also derived analytically. Trajectories in the Henon-Heiles system and the circular restricted three-body problem (CRTBP) are analyzed with the indicator entropy and compared with orthogonal fast Lyapunov indicator (OFLI). The results show that entropy is a better tool for discriminating periodicity in quasiperiodic trajectories than OFLI and can detect periodicity while excluding the spirals that are judged as periodic cases by OFLI. Finally, trajectories in the vicinity of 243 Ida and 6489 Golevka are considered as examples, and the numerical results verify these conclusions. Some trajectories near asteroids look irregular, but their higher entropy values as analyzed by this method serve as evidence of frequency regularity in three directions. Moreover, these results indicate that applying DFT to the trajectories in the vicinity of irregular small bodies and calculating their entropy in the frequency domain provides a useful quantitative analysis method for evaluating orderliness in the periodicity of quasi-periodic trajectories within a given time interval.

A Quasi-Experimental Evaluation of an On-Line Formative Assessment and Tutoring System

Science.gov (United States)

Koedinger, Kenneth R.; McLaughlin, Elizabeth A.; Heffernan, Neil T.

2010-01-01

ASSISTments is a web-based math tutor designed to address the need for timely student assessment while simultaneously providing instruction, thereby avoiding lost instruction time that typically occurs during assessment. This article presents a quasi-experiment that evaluates whether ASSISTments use has an effect on improving middle school…

A policy iteration approach to online optimal control of continuous-time constrained-input systems.

Science.gov (United States)

Modares, Hamidreza; Naghibi Sistani, Mohammad-Bagher; Lewis, Frank L

2013-09-01

This paper is an effort towards developing an online learning algorithm to find the optimal control solution for continuous-time (CT) systems subject to input constraints. The proposed method is based on the policy iteration (PI) technique which has recently evolved as a major technique for solving optimal control problems. Although a number of online PI algorithms have been developed for CT systems, none of them take into account the input constraints caused by actuator saturation. In practice, however, ignoring these constraints leads to performance degradation or even system instability. In this paper, to deal with the input constraints, a suitable nonquadratic functional is employed to encode the constraints into the optimization formulation. Then, the proposed PI algorithm is implemented on an actor-critic structure to solve the Hamilton-Jacobi-Bellman (HJB) equation associated with this nonquadratic cost functional in an online fashion. That is, two coupled neural network (NN) approximators, namely an actor and a critic are tuned online and simultaneously for approximating the associated HJB solution and computing the optimal control policy. The critic is used to evaluate the cost associated with the current policy, while the actor is used to find an improved policy based on information provided by the critic. Convergence to a close approximation of the HJB solution as well as stability of the proposed feedback control law are shown. Simulation results of the proposed method on a nonlinear CT system illustrate the effectiveness of the proposed approach. Copyright © 2013 ISA. All rights reserved.

The Measurement of Neutrino Induced Quasi-Elastic Cross Section In NOMAD

CERN Document Server

Kim, Jae Jun

2010-01-01

NOMAD (Neutrino Oscillation MAgnetic Detector) was a short baseline neutrino experiment conducted at CERN (the European Laboratory for Particle physics) West Area Neutrino Facility (WANF) with a neutrino beam provided by the super proton synchrotron (SPS) accelerator. In this dissertation, we present a measurement of muon-neutrino induced quasi-elastic cross section and its axial-mass off an isoscalar target in the NOMAD detector. The incident neutrino energy in NOMAD experiment spans from 2.5 to 300 GeV. The measurement of cross-section is conducted in two seperate kinematic-based topology, two-track and one-track topologies, where a proton is not properly reconstructed. The QEL cross-section as a function of the incoming neutrino energy is consistent for the two different topologies, and within errors , constant as a function of the neutrino energy. We determine the energy-averaged cross-section. From the shape-comparisons of kinematics of QEL-like events, the parameter of QEL axial mass is estimated. It i...

Ultrasonic delay measurements for the determination of the size of quasi-natural defects

International Nuclear Information System (INIS)

Proegler, H.

1978-01-01

Criteria in the form of delay measurements and phase assessments on ultrasonic pulses were worked out for a series of the most different reflection positions of the artificial, quasi-natural and natural kind which in many cases enable an differentiation of defects and the determination of the defect size. Even though it was not possible to completely clarify all effects occuring, such as reflection positions with undefined pulse orientations, the results sofar are still a contribution to the improvement of the stating ability of ultrasonic testing. (orig./RW) [de

The action uncertainty principle for continuous measurements

Science.gov (United States)

Mensky, Michael B.

1996-02-01

The action uncertainty principle (AUP) for the specification of the most probable readouts of continuous quantum measurements is proved, formulated in different forms and analyzed (for nonlinear as well as linear systems). Continuous monitoring of an observable A(p,q,t) with resolution Δa( t) is considered. The influence of the measurement process on the evolution of the measured system (quantum measurement noise) is presented by an additional term δ F(t)A(p,q,t) in the Hamiltonian where the function δ F (generalized fictitious force) is restricted by the AUP ∫|δ F(t)| Δa( t) d t ≲ and arbitrary otherwise. Quantum-nondemolition (QND) measurements are analyzed with the help of the AUP. A simple uncertainty relation for continuous quantum measurements is derived. It states that the area of a certain band in the phase space should be of the order of. The width of the band depends on the measurement resolution while its length is determined by the deviation of the system, due to the measurement, from classical behavior.

The action uncertainty principle for continuous measurements

International Nuclear Information System (INIS)

Mensky, M.B.

1996-01-01

The action uncertainty principle (AUP) for the specification of the most probable readouts of continuous quantum measurements is proved, formulated in different forms and analyzed (for nonlinear as well as linear systems). Continuous monitoring of an observable A(p,q,t) with resolution Δa(t) is considered. The influence of the measurement process on the evolution of the measured system (quantum measurement noise) is presented by an additional term δF(t) A(p,q,t) in the Hamiltonian where the function δF (generalized fictitious force) is restricted by the AUP ∫ vertical stroke δF(t) vertical stroke Δa(t)d t< or∼ℎ and arbitrary otherwise. Quantum-nondemolition (QND) measurements are analyzed with the help of the AUP. A simple uncertainty relation for continuous quantum measurements is derived. It states that the area of a certain band in the phase space should be of the order of ℎ. The width of the band depends on the measurement resolution while its length is determined by the deviation of the system, due to the measurement, from classical behavior. (orig.)

Developing Asthma-Friendly Childcare Centers with Online Training and Evaluation

OpenAIRE

Nowakowski, Alexandra Catherine Hayes; Carretta, Henry Joseph; Pineda, Nicole; Dudley, Julie Kurlfink; Forrest, Jamie R.

2016-01-01

In 2011, the Florida Asthma Coalition began offering its Asthma-Friendly Childcare Center training online. This course teaches childcare center employees the fundamentals of effective asthma management. It covers basic asthma physiology, ways to recognize asthma attacks, techniques to help children experiencing attacks, and strategies to create healthy environments for asthmatics. A team of health services researchers evaluated both years of the online training. Evaluators used a quasi-ex...

Continuous measurement of an atomic current

Science.gov (United States)

Laflamme, C.; Yang, D.; Zoller, P.

2017-04-01

We are interested in dynamics of quantum many-body systems under continuous observation, and its physical realizations involving cold atoms in lattices. In the present work we focus on continuous measurement of atomic currents in lattice models, including the Hubbard model. We describe a Cavity QED setup, where measurement of a homodyne current provides a faithful representation of the atomic current as a function of time. We employ the quantum optical description in terms of a diffusive stochastic Schrödinger equation to follow the time evolution of the atomic system conditional to observing a given homodyne current trajectory, thus accounting for the competition between the Hamiltonian evolution and measurement back action. As an illustration, we discuss minimal models of atomic dynamics and continuous current measurement on rings with synthetic gauge fields, involving both real space and synthetic dimension lattices (represented by internal atomic states). Finally, by "not reading" the current measurements the time evolution of the atomic system is governed by a master equation, where—depending on the microscopic details of our CQED setups—we effectively engineer a current coupling of our system to a quantum reservoir. This provides interesting scenarios of dissipative dynamics generating "dark" pure quantum many-body states.

Online Education: Panacea or Plateau

Science.gov (United States)

Seirup, Holly J.; Tirotta, Rose; Blue, Elfreda

2016-01-01

As online education continues to grow, understanding faculty and student perceptions seems to be an imperative piece of the decision to continue to expand online offerings. The purpose of this study was to review faculty and students perceptions of online learning and to gain an understanding of the current status of distance education. This study…

ANITA Air Monitoring on the International Space Station: Results Compared to Other Measurements

Science.gov (United States)

Honne, A.; Schumann-Olsen, H.; Kaspersen, K.; Limero, T.; Macatangay, A.; Mosebach, H.; Kampf, D.; Mudgett, P. D.; James, J. T.; Tan, G.;

Non-Dispersive Infrared Sensor for Online Condition Monitoring of Gearbox Oil

Directory of Open Access Journals (Sweden)

Markus S. Rauscher

2017-02-01

Full Text Available The condition of lubricating oil used in automotive and industrial gearboxes must be controlled in order to guarantee optimum performance and prevent damage to machinery parts. In normal practice, this is done by regular oil change intervals and routine laboratory analysis, both of which involve considerable operating costs. In this paper, we present a compact and robust optical sensor that can be installed in the lubrication circuit to provide quasi-continuous information about the condition of the oil. The measuring principle is based on non-dispersive infrared spectroscopy. The implemented sensor setup consists of an optical measurement cell, two thin-film infrared emitters, and two four-channel pyroelectric detectors equipped with optical bandpass filters. We present a method based on multivariate partial least squares regression to select appropriate optical bandpass filters for monitoring the oxidation, water content, and acid number of the oil. We perform a ray tracing analysis to analyze and correct the influence of the light path in the optical setup on the optical parameters of the bandpass filters. The measurement values acquired with the sensor for three different gearbox oil types show high correlation with laboratory reference data for the oxidation, water content, and acid number. The presented sensor can thus be a useful supplementary tool for the online condition monitoring of lubricants when integrated into a gearbox oil circuit.

Quasi-atoms

International Nuclear Information System (INIS)

Armbruster, P.

1976-01-01

The concept of a quasi-atom is discussed, and several experiments are described in which molecular or quasi-atomic transitions have been observed. X-ray spectra are shown for these experiments in which heavy ion projectiles were incident on various targets and the resultant combined system behaved as a quasi-atom. This rapidly developing field has already given new insight into atomic collision phenomena. (P.J.S.)

A Monte Carlo implementation of the predictor-corrector Quasi-Static method

International Nuclear Information System (INIS)

Hackemack, M. W.; Ragusa, J. C.; Griesheimer, D. P.; Pounders, J. M.

2013-01-01

The Quasi-Static method (QS) is a useful tool for solving reactor transients since it allows for larger time steps when updating neutron distributions. Because of the beneficial attributes of Monte Carlo (MC) methods (exact geometries and continuous energy treatment), it is desirable to develop a MC implementation for the QS method. In this work, the latest version of the QS method known as the Predictor-Corrector Quasi-Static method is implemented. Experiments utilizing two energy-groups provide results that show good agreement with analytical and reference solutions. The method as presented can easily be implemented in any continuous energy, arbitrary geometry, MC code. (authors)

Automatic continuous dew point measurement in combustion gases

Energy Technology Data Exchange (ETDEWEB)

Fehler, D.

1986-08-01

Low exhaust temperatures serve to minimize energy consumption in combustion systems. This requires accurate, continuous measurement of exhaust condensation. An automatic dew point meter for continuous operation is described. The principle of measurement, the design of the measuring system, and practical aspects of operation are discussed.

Scale-up of counter-current chromatography: demonstration of predictable isocratic and quasi-continuous operating modes from the test tube to pilot/process scale.

Science.gov (United States)

Sutherland, Ian; Hewitson, Peter; Ignatova, Svetlana

2009-12-11

Predictable scale-up from test tube derived distribution ratios and analytical-scale sample loading optimisation is demonstrated using a model sample system of benzyl alcohol and p-cresol in a heptane:ethyl acetate:methanol:water phase system with the new 18 L Maxi counter-current chromatography centrifuge. The versatility of having a liquid stationary phase with its high loading capacity and flexible operating modes is demonstrated at two different scales by separating and concentrating target compounds using a mixture of caffeine, vanillin, naringenin and carvone using a quasi-continuous technique called intermittent counter-current extraction.

Online Leadership and Learning: How Online Leaders May Learn From Their Working Experience

DEFF Research Database (Denmark)

Kolbæk, Ditte

2018-01-01

Online working environments develop and change continuously, meaning that online leaders and online team members must learn to adapt to change and should utilize emerging possibilities for doing their jobs. The purpose of this chapter is to explore how online leaders learn from experiences develo...

Quasi-one-dimensional density of states in a single quantum ring.

Science.gov (United States)

Kim, Heedae; Lee, Woojin; Park, Seongho; Kyhm, Kwangseuk; Je, Koochul; Taylor, Robert A; Nogues, Gilles; Dang, Le Si; Song, Jin Dong

2017-01-05

Generally confinement size is considered to determine the dimensionality of nanostructures. While the exciton Bohr radius is used as a criterion to define either weak or strong confinement in optical experiments, the binding energy of confined excitons is difficult to measure experimentally. One alternative is to use the temperature dependence of the radiative recombination time, which has been employed previously in quantum wells and quantum wires. A one-dimensional loop structure is often assumed to model quantum rings, but this approximation ceases to be valid when the rim width becomes comparable to the ring radius. We have evaluated the density of states in a single quantum ring by measuring the temperature dependence of the radiative recombination of excitons, where the photoluminescence decay time as a function of temperature was calibrated by using the low temperature integrated intensity and linewidth. We conclude that the quasi-continuous finely-spaced levels arising from the rotation energy give rise to a quasi-one-dimensional density of states, as long as the confined exciton is allowed to rotate around the opening of the anisotropic ring structure, which has a finite rim width.

Effectiveness of Continuous Glucose Monitoring for Managing Type-1 Diabetic Patients and Barrier to Its Use: A Quasi Interventional Trial

Directory of Open Access Journals (Sweden)

Hassan M. Al-Musa

2018-04-01

Full Text Available Background: Type-1 diabetes is one of the largest endocrine and metabolic health issues among children and young adults. Diabetes mellitus is associated with many long-term complications. Aim and Objectives: To compare outcomes in groups monitored either by real time continuous glucose monitoring or by Self Monitoring of Blood Glucose (SMBG; 3-4 blood glucose measurements per day. Also we studied barrier for the use of CMG. Material and Methods: It is a prospective quasi experimental controlled trial at diabetic center in Abha, KSA. Out of 307 patients registered, 60 T1DM patients agreed to participate; out of them 30 patients were enrolled in intervention cohort, they used CGM sensor continuously while 30 patients were in the control group they used SMBG. All were followed for 6 months; HbA1c was measured at 3 and 6 months. Barrier to use of sensor was evaluated with a questionnaire. Results: At baseline no significant difference was observed in the average HbA1c between the groups (10.57 % vs 10.73 %. HbA1c reduction compared to baseline levels in the intervention cohort was 2.15% and 2.36% at 3 and 6 months. In control group, HbA1c reduced to 1.07% and 1.22% at 3 and 6 months showing significant difference (p=0.002 and p=0.001 at 3 and 6 months. Younger patients age <20 years had significantly better reduction of HbA1c (2.28% vs 1.27%, p=0.015 and 2.47% vs 1.98%, p=0.004 at 3 and 6 months. The hypoglycemic events were statistically reduced in the intervention group (p<0.001 and also the ketoacidosis and hospital admissions (20.0% vs, 3.3%, p<0.001. Conclusion: We found that the use of CGM sensor was associated with significant HbA1c reductions and improved glycaemic control.

Thermographic Sensing For On-Line Industrial Control

Science.gov (United States)

Holmsten, Dag

1986-10-01

It is today's emergence of thermoelectrically cooled, highly accurate infrared linescanners and imaging systems that has definitely made on-line Infraread Thermography (IRT) possible. Specifically designed for continuous use, these scanners are equipped with dedicated software capable of monitoring and controlling highly complex thermodynamic situations. This paper will outline some possible implications of using IRT on-line by describing some uses of this technology in the steel-making (hot rolling) and automotive industries (machine-vision). A warning is also expressed that IRT technology not originally designed for automated applications e.g. high resolution, imaging systems, should not be directly applied to an on-line measurement situation without having its measurement resolution, accuracy and especially its repeatability, reliably proven. Some suitable testing procedures are briefly outlined at the end of the paper.

A quasi-vehicle/bridge interaction model for high speed railways

Czech Academy of Sciences Publication Activity Database

Yau, J. D.; Frýba, Ladislav

2015-01-01

Roč. 31, č. 2 (2015), s. 217-225 ISSN 1727-7191 R&D Projects: GA ČR(CZ) GA103/08/1340 Grant - others:National Science Council in Taiwan(TW) NSC 102-2923-E-032-002-MY3 Institutional support: RVO:68378297 Keywords : high speed train * quasi-VBI model * resonance * vehicle-bridge interaction Subject RIV: JM - Building Engineering Impact factor: 0.828, year: 2015 http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=9645645&fileId=S1727719114000896

Online adaptive optimal control for continuous-time nonlinear systems with completely unknown dynamics

Science.gov (United States)

Lv, Yongfeng; Na, Jing; Yang, Qinmin; Wu, Xing; Guo, Yu

2016-01-01

An online adaptive optimal control is proposed for continuous-time nonlinear systems with completely unknown dynamics, which is achieved by developing a novel identifier-critic-based approximate dynamic programming algorithm with a dual neural network (NN) approximation structure. First, an adaptive NN identifier is designed to obviate the requirement of complete knowledge of system dynamics, and a critic NN is employed to approximate the optimal value function. Then, the optimal control law is computed based on the information from the identifier NN and the critic NN, so that the actor NN is not needed. In particular, a novel adaptive law design method with the parameter estimation error is proposed to online update the weights of both identifier NN and critic NN simultaneously, which converge to small neighbourhoods around their ideal values. The closed-loop system stability and the convergence to small vicinity around the optimal solution are all proved by means of the Lyapunov theory. The proposed adaptation algorithm is also improved to achieve finite-time convergence of the NN weights. Finally, simulation results are provided to exemplify the efficacy of the proposed methods.

A CPW-Fed Quasi-PIFA Antenna Using Quasi-Lumped Resonators for Mobile Phones

Directory of Open Access Journals (Sweden)

Majid Rafiee

2015-01-01

Full Text Available A novel single CPW-fed Quasi-Planar Inverted-F Antenna (PIFA using quasi-lumped elements is developed for mobile communication handheld terminals operating at 2.6 GHz. The antenna is composed of an inductor covered by a set of interdigital and parasitic capacitors. The proposed antenna achieves a measured bandwidth of 11% for return loss with the antenna gain of about 4 dBi. The antenna is designed in single layer (zero height which is appropriate to be used in thin devices where a small room is considered for the antenna. The proposed antenna is suitable for use in Long Term Evolution band 7. The operating frequency of introduced antenna depends on the number of interdigital fingers and inductor length rather than the total resonator patch only, so that the operating frequency can be altered while the total patch size remains unchanged. The calculated operating frequency is confirmed by simulation and measurement. Also the dipole-like simulated radiation pattern is confirmed by measurement.

NMR relaxation rate in quasi one-dimensional antiferromagnets

Science.gov (United States)

Capponi, Sylvain; Dupont, Maxime; Laflorencie, Nicolas; Sengupta, Pinaki; Shao, Hui; Sandvik, Anders W.

We compare results of different numerical approaches to compute the NMR relaxation rate 1 /T1 in quasi one-dimensional (1d) antiferromagnets. In the purely 1d regime, recent numerical simulations using DMRG have provided the full crossover behavior from classical regime at high temperature to universal Tomonaga-Luttinger liquid at low-energy (in the gapless case) or activated behavior (in the gapped case). For quasi 1d models, we can use mean-field approaches to reduce the problem to a 1d one that can be studied using DMRG. But in some cases, we can also simulate the full microscopic model using quantum Monte-Carlo techniques. This allows to compute dynamical correlations in imaginary time and we will discuss recent advances to perform stochastic analytic continuation to get real frequency spectra. Finally, we connect our results to experiments on various quasi 1d materials.

REDUCTION IN CUTS SPEED AT THE BEGINNING OF A SORTING SIDINGS, EQUIPPED WITH QUASI-CONTINUOUS SPEED CONTROL SYSTEM

Directory of Open Access Journals (Sweden)

O. A. Nazarov

2016-08-01

Full Text Available Purpose. Clear and uninterrupted operation of humps depends on the quality of technical equipment and control technology of cuts speed. Technology of interval and purposive regulation of cuts speed is used at most humps. The article discusses ways to reduce the cuts rolling speed to a safe level at the beginning of the sorting sidings equipped with quasi-continuous speed control system. Methodology. It proposed three fundamentally different ways to reduce the cuts rolling speed at the beginning of the sorting siding. The analysis of the ways to reduce cuts rolling speed to a safe level at the beginning of the sorting sidings was conducted using simulation the process of cuts rolling from humps equipped with quasi-continuous speed control. Findings. As a result of analysis, the inappropriateness of opposite elevation using on the roll-out part of the hump after the last separation switch point. Spot regulators of cars speed can be used to reduce the cuts rolling speed at the beginning of the sorting siding, but this leads to a division conditions deterioration on the last separating switch points of long cuts with the following after them short cuts. Reducing the cuts rolling speed at the beginning of the sorting siding can be carried out using the beam on a stationary wagon retarders park brake position. Control Algorithm park brake position is quite simple. All produce should be unhooked from it at a safe speed. If the accuracy of the implementation of the set speed output to unhook from the park brake position is low, it is possible to eliminate the error of point regulators cars speed. Originality. The question where to start location point of wagon retarders zone to reduce speed to cut level requires additional research. Reducing rolling cut the speed at the beginning of the sorting sidings can be carried out using the beam on a stationary wagon retarders park brake position. Practical value. Control Algorithm park brake position is quite

A Mindful Approach to Teaching Emotional Intelligence to Undergraduate Students Online and in Person

Science.gov (United States)

Cotler, Jami L.; DiTursi, Dan; Goldstein, Ira; Yates, Jeff; DelBelso, Deb

2017-01-01

In this paper we examine whether emotional intelligence (EI) can be taught online and, if so, what key variables influence the successful implementation of this online learning model. Using a 3 x 2 factorial quasi-experimental design, this mixed-methods study found that a team-based learning environment using a blended teaching approach, supported…

Online beam energy measurement of Beijing electron positron collider II linear accelerator

Science.gov (United States)

Wang, S.; Iqbal, M.; Liu, R.; Chi, Y.

2016-02-01

This paper describes online beam energy measurement of Beijing Electron Positron Collider upgraded version II linear accelerator (linac) adequately. It presents the calculation formula, gives the error analysis in detail, discusses the realization in practice, and makes some verification. The method mentioned here measures the beam energy by acquiring the horizontal beam position with three beam position monitors (BPMs), which eliminates the effect of orbit fluctuation, and is much better than the one using the single BPM. The error analysis indicates that this online measurement has further potential usage such as a part of beam energy feedback system. The reliability of this method is also discussed and demonstrated in this paper.

Online monitoring of Mezcal fermentation based on redox potential measurements.

Science.gov (United States)

Escalante-Minakata, P; Ibarra-Junquera, V; Rosu, H C; De León-Rodríguez, A; González-García, R

2009-01-01

We describe an algorithm for the continuous monitoring of the biomass and ethanol concentrations as well as the growth rate in the Mezcal fermentation process. The algorithm performs its task having available only the online measurements of the redox potential. The procedure combines an artificial neural network (ANN) that relates the redox potential to the ethanol and biomass concentrations with a nonlinear observer-based algorithm that uses the ANN biomass estimations to infer the growth rate of this fermentation process. The results show that the redox potential is a valuable indicator of the metabolic activity of the microorganisms during Mezcal fermentation. In addition, the estimated growth rate can be considered as a direct evidence of the presence of mixed culture growth in the process. Usually, mixtures of microorganisms could be intuitively clear in this kind of processes; however, the total biomass data do not provide definite evidence by themselves. In this paper, the detailed design of the software sensor as well as its experimental application is presented at the laboratory level.

Approaching Common Ground: Defining Quality in Online Education

Science.gov (United States)

Mitchell, Regina L. Garza

2010-01-01

The notion of quality in regard to teaching and learning has always been highly debatable. Is it best measured by qualitative or quantitative measures? Summative or formative assessments? Comparative or independent studies? As someone deeply involved with online education for many years, the author continues to seek definitive answers. During her…

ELABORATING A MEASUREMENT INSTRUMENT FOR THE FLOW EXPERIENCE DURING ONLINE INFORMATION SEARCH

Directory of Open Access Journals (Sweden)

Caraivan Luiza

2012-12-01

Full Text Available Flow is a construct imported in marketing research from social sciences in order to examine consumer behavior in the online medium. The construct describes a state of deep involvement in a challenging activity, most frequently characterized by high levels of enjoyment, control and concentration. Researchers found that the degree to which online experience is challenging can be defined, measured, and related well to important marketing variables. As shown by our extensive literature review, flow measurements include antecedents, dimensions and consequences of flow. The present paper represents a detailed description of the construct`s operationalization in the context of online information search. In this respect, our main goal is to produce a basic instrument to evaluate the flow experience of online search, in order to capitalize on the premises of an interactive, complex informational medium – the World Wide Web – and on the consequence of an exploratory informational behavior of users. The instrument is conceived to offer a primal possibility to collect data. The composition, source and significance of the 11 scales used to measure the multiple factors of the flow experience during online search are detailed in this study with the aim to ensure the compliance with scientific rigors and to facilitate correct reports of data related to the reliability and validity of measurements. For further research, we propose factor analysis to test the resulted instrument and to ensure that the measures employed are psychometrically sound. Factor analysis refers to a wide range of statistic techniques used to represent a set of variables in concordance with a reduced number of hypothetical variables called factors. Factorial analysis is used to solve two types of problems: reducing the number of variables to increase data processing speed and identifying hidden patterns in the existent data relations. However, we expect our scales to perform

On-line determination of anions in pulp mills by capillary electrophoresis (CE); Tehdasoloissa tapahtuva anionien kapillaarielektroforeettinen on-line maeaeritys ja sen hyoedyntaeminen prosessivalvonnassa - MPKY 02

Energy Technology Data Exchange (ETDEWEB)

Kokkonen, R.; Holmberg, M.; Vainikka, V. [Finnish Pulp and Paper Research Institute, Espoo (Finland)

1998-12-31

The aim of the study was to set-up a process control system for on-line measurement of certain anions. Typical anions which forms precipitates in pulp and paper mills are oxalate, carbonate and sulphate. Thus it is important to develop a continuous process analyzing system to control concentration levels of this anions. For the preliminary tests of continuous determinations of chloride and sulphate anions in tap water a simple on-line system was build in KCL (The Finnish Pulp and Paper Research Institute) and connected to a capillary electroforesis apparatus. In the preliminary tests a chromate buffer (ph = 7.6) was used. Separation of chloride and sulphate was excellent but the stability of buffer was not good enough and it was usable only for few hours. After experimental studies VTT developed a stable capillary electrophoresis method based on mixed amine buffer and this was selected for an on-line method for determination of anions in process waters of the pulp and paper industry. In the preliminary on-line test (r = 20) repeatabilities of migration times of sulphate and chloride with the chromate buffer were < 5 % (RSD) and peak heights < 15 % (RSD). With the mixed amine buffer repeatabilities were better. The preliminary tests showed that it is possible to connect a capillary electrophoresis system to on-line measurements. For the moment no commercial on-line CE apparatus is available. (orig.)

On-line determination of anions in pulp mills by capillary electrophoresis (CE); Tehdasoloissa tapahtuva anionien kapillaarielektroforeettinen on-line maeaeritys ja sen hyoedyntaeminen prosessivalvonnassa - MPKY 02

Energy Technology Data Exchange (ETDEWEB)

Kokkonen, R; Holmberg, M; Vainikka, V [Finnish Pulp and Paper Research Institute, Espoo (Finland)

1999-12-31

The aim of the study was to set-up a process control system for on-line measurement of certain anions. Typical anions which forms precipitates in pulp and paper mills are oxalate, carbonate and sulphate. Thus it is important to develop a continuous process analyzing system to control concentration levels of this anions. For the preliminary tests of continuous determinations of chloride and sulphate anions in tap water a simple on-line system was build in KCL (The Finnish Pulp and Paper Research Institute) and connected to a capillary electroforesis apparatus. In the preliminary tests a chromate buffer (ph = 7.6) was used. Separation of chloride and sulphate was excellent but the stability of buffer was not good enough and it was usable only for few hours. After experimental studies VTT developed a stable capillary electrophoresis method based on mixed amine buffer and this was selected for an on-line method for determination of anions in process waters of the pulp and paper industry. In the preliminary on-line test (r = 20) repeatabilities of migration times of sulphate and chloride with the chromate buffer were < 5 % (RSD) and peak heights < 15 % (RSD). With the mixed amine buffer repeatabilities were better. The preliminary tests showed that it is possible to connect a capillary electrophoresis system to on-line measurements. For the moment no commercial on-line CE apparatus is available. (orig.)

Diffusion of nonequilibrium quasi-particles in a cuprate superconductor

International Nuclear Information System (INIS)

Gedik, N.; Orenstein, J.; Liang, Ruixing; Bonn, D.A.; Hardy, W.N.

2003-01-01

We report a transport study of nonequilibrium quasi-particles in a high-transition-temperature cuprate superconductor using the transient grating technique. Low-intensity laser excitation (at a photon energy of 1.5 electron volts) was used to introduce a spatially periodic density of quasi-particles into a high-quality untwinned single crystal of YBa2Cu3O6.5. Probing the evolution of the initial density through space and time yielded the quasi-particle diffusion coefficient and the inelastic and elastic scattering rates. The technique reported here is potentially applicable to precision measurements of quasi-particle dynamics not only in cuprate superconductors but in other electronic systems as well

Hydromagnetic quasi-geostrophic modes in rapidly rotating planetary cores

DEFF Research Database (Denmark)

Canet, E.; Finlay, Chris; Fournier, A.

2014-01-01

The core of a terrestrial-type planet consists of a spherical shell of rapidly rotating, electrically conducting, fluid. Such a body supports two distinct classes of quasi-geostrophic (QG) eigenmodes: fast, primarily hydrodynamic, inertial modes with period related to the rotation time scale...... decreases toward the outer boundary in a spherical shell, QG modes tend to be compressed towards the outer boundary. Including magnetic dissipation, we find a continuous transition from diffusionless slow magnetic modes into quasi-free decay magnetic modes. During that transition (which is controlled......, or shorter than, their oscillation time scale.Based on our analysis, we expect Mercury to be in a regime where the slow magnetic modes are of quasi-free decay type. Earth and possibly Ganymede, with their larger Elsasser numbers, may possess slow modes that are in the transition regime of weak diffusion...

Essays on Incentives and Measurement of Online Marketing Efforts

OpenAIRE

Berman, Ron

2014-01-01

This dissertation contains three essays that examine different aspects of online marketing activities, the ability of marketers to measure the effectiveness of such activities, and the design of experiments to aid in this measurement.Chapter 2 examines the impact of search engine optimization (SEO) on the competition between advertisers for organic and sponsored search results. The results show that a positive level of search engine optimization may improve the search engine's ranking quality...

Quasi-superplasticity of a banded-grained Al-Mg-Y alloy processed by continuous casting-extrusion

Energy Technology Data Exchange (ETDEWEB)

Cao, Furong, E-mail: cfr-lff@163.com [School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Zhu, Xiaotong [School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Huaian Dekema Semiconductor Co., Ltd., Huaian 223300 (China); Wang, Shuncheng [Institute of Materials Processing and Forming Technology, Guangdong General Research Institute of Industrial Technology, Guangzhou 510650 (China); Shi, Lu [School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Xu, Guangming [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China); Wen, Jinglin [School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China)

2017-04-06

The continuous casting-extrusion (CTE) process is a short-route technology for fabricating aluminum and aluminum alloy wires. A novel Al-1.44Mg-1.09Y alloy was prepared by CTE, and its mechanical properties and microstructure evolution were investigated at elevated temperatures to explore the hot tensile ductility of aluminum alloy wire. A true strain to failure of 1.159 was obtained at 773 K and 1.67×10{sup −2} s{sup −1}, and the present alloy exhibits high strain rate quasi-superplasticity. Microstructure observations reveal that it is difficult to realize the equiaxedness of elongated or textured grains through hot tensile deformation. A new deformation mechanism map (DMM) was constructed which predicts that dislocation climb at high stress dominates the high-temperature deformation process. This theoretical prediction using the DMM is in good agreement with experimental transmission-electron-microscopy results and with the estimated true stress exponent of 5 and the activation energy for deformation in the range 127.378―141.536 kJ mol{sup −1}. A new three-dimensional histogram containing a dynamic recovery (DRV) or dynamic recrystallization factor was constructed to demonstrate that the DRV mechanism dominates the deformation. Most experimental results are consistent with prediction using this histogram.

Quasi-superplasticity of a banded-grained Al-Mg-Y alloy processed by continuous casting-extrusion

International Nuclear Information System (INIS)

Cao, Furong; Zhu, Xiaotong; Wang, Shuncheng; Shi, Lu; Xu, Guangming; Wen, Jinglin

2017-01-01

The continuous casting-extrusion (CTE) process is a short-route technology for fabricating aluminum and aluminum alloy wires. A novel Al-1.44Mg-1.09Y alloy was prepared by CTE, and its mechanical properties and microstructure evolution were investigated at elevated temperatures to explore the hot tensile ductility of aluminum alloy wire. A true strain to failure of 1.159 was obtained at 773 K and 1.67×10 −2 s −1 , and the present alloy exhibits high strain rate quasi-superplasticity. Microstructure observations reveal that it is difficult to realize the equiaxedness of elongated or textured grains through hot tensile deformation. A new deformation mechanism map (DMM) was constructed which predicts that dislocation climb at high stress dominates the high-temperature deformation process. This theoretical prediction using the DMM is in good agreement with experimental transmission-electron-microscopy results and with the estimated true stress exponent of 5 and the activation energy for deformation in the range 127.378―141.536 kJ mol −1 . A new three-dimensional histogram containing a dynamic recovery (DRV) or dynamic recrystallization factor was constructed to demonstrate that the DRV mechanism dominates the deformation. Most experimental results are consistent with prediction using this histogram.

Measurement of quasi-static and low frequency electric fields on the Viking satellite

International Nuclear Information System (INIS)

Block, L.P.; Faelthammar, C.G.; Lindqvist, P.A.; Marklund, G.T.; Mozer, F.S.; Pedersen, A.

1987-03-01

The instrument for measurement of quasi-static and low frequency (dc and slow varying) electric fields on the Viking satellite is described. The instrument uses three spherical probe pairs to measure the full three-dimensional electric field vector with 18.75 ms time resolution. The probes are kept near plasma potential by means of a controllable bias current. A guard covering part of the booms is biased to a negative voltage to prevent photoelectrons escaping from the probes from reaching the satellite body. Current-voltage sweeps are performed to determine the plasma density and temperature and to select the optimal bias current. The bias currents to the probes and the voltage offset on the guards as well as the current-voltage sweeps are controlled by an on-board microprocessor which can be programmed from the ground and allows great flexibility. (authors)

Actively stabilized optical fiber interferometry technique for online/in-process surface measurement

International Nuclear Information System (INIS)

Wang Kaiwei; Martin, Haydn; Jiang Xiangqian

2008-01-01

In this paper, we report the recent progress in optical-beam scanning fiber interferometry for potential online nanoscale surface measurement based on the previous research. It attempts to generate a robust and miniature measurement device for future development into a multiprobe array measurement system. In this research, both fiber-optic-interferometry and the wavelength-division-multiplexing techniques have been used, so that the optical probe and the optical interferometer are well spaced and fast surface scanning can be carried out, allowing flexibility for online measurement. In addition, this system provides a self-reference signal to stabilize the optical detection with high common-mode noise suppression by adopting an active phase tracking and stabilization technique. Low-frequency noise was significantly reduced compared with unstabilized result. The measurement of a sample surface shows an attained repeatability of 3.3 nm

Physical dynamics of quasi-particles in nonlinear wave equations

International Nuclear Information System (INIS)

Christov, Ivan; Christov, C.I.

2008-01-01

By treating the centers of solitons as point particles and studying their discrete dynamics, we demonstrate a new approach to the quantization of the soliton solutions of the sine-Gordon equation, one of the first model nonlinear field equations. In particular, we show that a linear superposition of the non-interacting shapes of two solitons offers a qualitative (and to a good approximation quantitative) description of the true two-soliton solution, provided that the trajectories of the centers of the superimposed solitons are considered unknown. Via variational calculus, we establish that the dynamics of the quasi-particles obey a pseudo-Newtonian law, which includes cross-mass terms. The successful identification of the governing equations of the (discrete) quasi-particles from the (continuous) field equation shows that the proposed approach provides a basis for the passage from the continuous to a discrete description of the field

Physical dynamics of quasi-particles in nonlinear wave equations

Energy Technology Data Exchange (ETDEWEB)

Christov, Ivan [Department of Mathematics, Texas A and M University, College Station, TX 77843-3368 (United States)], E-mail: christov@alum.mit.edu; Christov, C.I. [Department of Mathematics, University of Louisiana at Lafayette, Lafayette, LA 70504-1010 (United States)], E-mail: christov@louisiana.edu

2008-02-04

By treating the centers of solitons as point particles and studying their discrete dynamics, we demonstrate a new approach to the quantization of the soliton solutions of the sine-Gordon equation, one of the first model nonlinear field equations. In particular, we show that a linear superposition of the non-interacting shapes of two solitons offers a qualitative (and to a good approximation quantitative) description of the true two-soliton solution, provided that the trajectories of the centers of the superimposed solitons are considered unknown. Via variational calculus, we establish that the dynamics of the quasi-particles obey a pseudo-Newtonian law, which includes cross-mass terms. The successful identification of the governing equations of the (discrete) quasi-particles from the (continuous) field equation shows that the proposed approach provides a basis for the passage from the continuous to a discrete description of the field.

Dynamic Output Feedback Robust Model Predictive Control via Zonotopic Set-Membership Estimation for Constrained Quasi-LPV Systems

Directory of Open Access Journals (Sweden)

Xubin Ping

2015-01-01

Full Text Available For the quasi-linear parameter varying (quasi-LPV system with bounded disturbance, a synthesis approach of dynamic output feedback robust model predictive control (OFRMPC is investigated. The estimation error set is represented by a zonotope and refreshed by the zonotopic set-membership estimation method. By properly refreshing the estimation error set online, the bounds of true state at the next sampling time can be obtained. Furthermore, the feasibility of the main optimization problem at the next sampling time can be determined at the current time. A numerical example is given to illustrate the effectiveness of the approach.

FPGA-Based Smart Sensor for Online Displacement Measurements Using a Heterodyne Interferometer

Science.gov (United States)

Vera-Salas, Luis Alberto; Moreno-Tapia, Sandra Veronica; Garcia-Perez, Arturo; de Jesus Romero-Troncoso, Rene; Osornio-Rios, Roque Alfredo; Serroukh, Ibrahim; Cabal-Yepez, Eduardo

2011-01-01

The measurement of small displacements on the nanometric scale demands metrological systems of high accuracy and precision. In this context, interferometer-based displacement measurements have become the main tools used for traceable dimensional metrology. The different industrial applications in which small displacement measurements are employed requires the use of online measurements, high speed processes, open architecture control systems, as well as good adaptability to specific process conditions. The main contribution of this work is the development of a smart sensor for large displacement measurement based on phase measurement which achieves high accuracy and resolution, designed to be used with a commercial heterodyne interferometer. The system is based on a low-cost Field Programmable Gate Array (FPGA) allowing the integration of several functions in a single portable device. This system is optimal for high speed applications where online measurement is needed and the reconfigurability feature allows the addition of different modules for error compensation, as might be required by a specific application. PMID:22164040

Evaluating the online platform of a blended-learning pharmacist continuing education degree program.

Science.gov (United States)

Wilbur, Kerry

2016-01-01

Distance-based continuing education opportunities are increasingly embraced by health professionals worldwide. To evaluate the online component of a blended-learning degree program for pharmacists, we conducted a structured self-assessment and peer review using an instrument systematically devised according to Moore's principles of transactional distance. The web-based platform for 14 courses was reviewed by both local and external faculty, followed by shared reflection of individual and aggregate results. Findings indicated a number of course elements for modification to enhance the structure, dialog, and autonomy of the student learning experience. Our process was an important exercise in quality assurance and is worthwhile for other health disciplines developing and delivering distance-based content to pursue.

BinQuasi: a peak detection method for ChIP-sequencing data with biological replicates.

Science.gov (United States)

Goren, Emily; Liu, Peng; Wang, Chao; Wang, Chong

2018-04-19

ChIP-seq experiments that are aimed at detecting DNA-protein interactions require biological replication to draw inferential conclusions, however there is no current consensus on how to analyze ChIP-seq data with biological replicates. Very few methodologies exist for the joint analysis of replicated ChIP-seq data, with approaches ranging from combining the results of analyzing replicates individually to joint modeling of all replicates. Combining the results of individual replicates analyzed separately can lead to reduced peak classification performance compared to joint modeling. Currently available methods for joint analysis may fail to control the false discovery rate at the nominal level. We propose BinQuasi, a peak caller for replicated ChIP-seq data, that jointly models biological replicates using a generalized linear model framework and employs a one-sided quasi-likelihood ratio test to detect peaks. When applied to simulated data and real datasets, BinQuasi performs favorably compared to existing methods, including better control of false discovery rate than existing joint modeling approaches. BinQuasi offers a flexible approach to joint modeling of replicated ChIP-seq data which is preferable to combining the results of replicates analyzed individually. Source code is freely available for download at https://cran.r-project.org/package=BinQuasi, implemented in R. pliu@iastate.edu or egoren@iastate.edu. Supplementary material is available at Bioinformatics online.

Online Sellers’ Website Quality Influencing Online Buyers’ Purchase Intention

Science.gov (United States)

Shea Lee, Tan; Ariff, Mohd Shoki Md; Zakuan, Norhayati; Sulaiman, Zuraidah; Zameri Mat Saman, Muhamad

2016-05-01

The increase adoption of Internet among young users in Malaysia provides high prospect for online seller. Young users aged between 18 and 25 years old are important to online sellers because they are actively involved in online purchasing and this group of online buyers is expected to dominate future online market. Therefore, examining online sellers’ website quality and online buyers’ purchase intention is crucial. Based on the Theory of planned behavior (TPB), a conceptual model of online sellers’ website quality and purchase intention of online buyers was developed. E-tailQ instrument was adapted in this study which composed of website design, reliability/fulfillment, security, privacy & trust, and customer service. Using online questionnaire and convenience sampling procedure, primary data were obtained from 240 online buyers aged between 18 to 25 years old. It was discovered that website design, website reliability/fulfillment, website security, privacy & trust, and website customer service positively and significantly influence intention of online buyers to continuously purchase via online channels. This study concludes that online sellers’ website quality is important in predicting online buyers’ purchase intention. Recommendation and implication of this study were discussed focusing on how online sellers should improve their website quality to stay competitive in online business.

On-line scheme for parameter estimation of nonlinear lithium ion battery equivalent circuit models using the simplified refined instrumental variable method for a modified Wiener continuous-time model

International Nuclear Information System (INIS)

Allafi, Walid; Uddin, Kotub; Zhang, Cheng; Mazuir Raja Ahsan Sha, Raja; Marco, James

2017-01-01

Highlights: •Off-line estimation approach for continuous-time domain for non-invertible function. •Model reformulated to multi-input-single-output; nonlinearity described by sigmoid. •Method directly estimates parameters of nonlinear ECM from the measured-data. •Iterative on-line technique leads to smoother convergence. •The model is validated off-line and on-line using NCA battery. -- Abstract: The accuracy of identifying the parameters of models describing lithium ion batteries (LIBs) in typical battery management system (BMS) applications is critical to the estimation of key states such as the state of charge (SoC) and state of health (SoH). In applications such as electric vehicles (EVs) where LIBs are subjected to highly demanding cycles of operation and varying environmental conditions leading to non-trivial interactions of ageing stress factors, this identification is more challenging. This paper proposes an algorithm that directly estimates the parameters of a nonlinear battery model from measured input and output data in the continuous time-domain. The simplified refined instrumental variable method is extended to estimate the parameters of a Wiener model where there is no requirement for the nonlinear function to be invertible. To account for nonlinear battery dynamics, in this paper, the typical linear equivalent circuit model (ECM) is enhanced by a block-oriented Wiener configuration where the nonlinear memoryless block following the typical ECM is defined to be a sigmoid static nonlinearity. The nonlinear Weiner model is reformulated in the form of a multi-input, single-output linear model. This linear form allows the parameters of the nonlinear model to be estimated using any linear estimator such as the well-established least squares (LS) algorithm. In this paper, the recursive least square (RLS) method is adopted for online parameter estimation. The approach was validated on experimental data measured from an 18650-type Graphite

Generalized bi-quasi-variational inequalities for quasi-semi-monotone and bi-quasi-semi-monotone operators with applications in non-compact settings and minimization problems

Directory of Open Access Journals (Sweden)

Chowdhury Molhammad SR

2000-01-01

Full Text Available Results are obtained on existence theorems of generalized bi-quasi-variational inequalities for quasi-semi-monotone and bi-quasi-semi-monotone operators in both compact and non-compact settings. We shall use the concept of escaping sequences introduced by Border (Fixed Point Theorem with Applications to Economics and Game Theory, Cambridge University Press, Cambridge, 1985 to obtain results in non-compact settings. Existence theorems on non-compact generalized bi-complementarity problems for quasi-semi-monotone and bi-quasi-semi-monotone operators are also obtained. Moreover, as applications of some results of this paper on generalized bi-quasi-variational inequalities, we shall obtain existence of solutions for some kind of minimization problems with quasi- semi-monotone and bi-quasi-semi-monotone operators.

Revealed or hidden?: insights into ways of measuring mental representations online: A comparative study of APT and CNET applied to an online agent

NARCIS (Netherlands)

Horeni, O.; Arentze, T.A.; Dellaert, B.G.C.; Timmermans, H.J.P.

2010-01-01

This paper presents and compares newly developed interview techniques (APT and CNET) which were implemented and tested by an online agent in order to measure mental representations underlying activity-choices. The comparison is supported and completed by the results from a first online survey with

Improving Health Care Providers' Capacity for Self-Regulated Learning in Online Continuing Pharmacy Education: The Role of Internet Self-Efficacy.

Science.gov (United States)

Chiu, Yen-Lin; Liang, Jyh-Chong; Mao, Pili Chih-Min; Tsai, Chin-Chung

2016-01-01

Although Internet-based learning is widely used to improve health professionals' knowledge and skills, the self-regulated learning (SRL) activities of online continuing education in pharmacy are seldom discussed. The main purpose of this study was to explore the relationships between pharmacists' Internet self-efficacy (ISE) and their SRL in online continuing education. A total of 164 in-service pharmacists in Taiwan were surveyed with the Internet Self-Efficacy Survey, including basic ISE (B-ISE), advanced ISE (A-ISE) and professional ISE (P-ISE), as well as the Self-Regulated Learning Questionnaire consisting of preparatory SRL (P-SRL) and enactment SRL (E-SRL). Results of a 1-by-3 (educational levels: junior college versus bachelor versus master) analysis of variance and a 1-by-4 (institutions: community-based versus hospital versus clinic versus company) analysis of variance revealed that there were differences in ISE and SRL among different education levels and working institutions. The hierarchical regression analyses indicated that B-ISE and P-ISE were significant predictors of P-SRL, whereas P-ISE was a critical predictor of E-SRL. Moreover, the interaction of P-ISE × age was linked to E-SRL, implying that P-ISE has a stronger influence on E-SRL for older pharmacists than for younger pharmacists. However, the interactions between age and ISE (A-ISE, B-ISE, and P-ISE) were not related to P-SRL. This study highlighted the importance of ISE and age for increasing pharmacists' SRL in online continuing education.

Sb(III) and Sb(V) separation and analytical speciation by a continuous tandem on-line separation device in connection with inductively coupled plasma atomic emission spectrometry

Energy Technology Data Exchange (ETDEWEB)

Menendez Garcia, A. [Oviedo Univ. (Spain). Dept. of Phys. and Anal. Chem.; Perez Rodriguez, M.C. [Oviedo Univ. (Spain). Dept. of Phys. and Anal. Chem.; Sanchez Uria, J.F. [Oviedo Univ. (Spain). Dept. of Phys. and Anal. Chem.; Sanz-Medel, A. [Oviedo Univ. (Spain). Dept. of Phys. and Anal. Chem.

1995-09-01

A sensitive, precise and automated non-chromatographic method for Sb(III) and Sb(V) analytical speciation based on a continuous tandem on-line separation device in connection with inductively coupled plasma-atomic emission (ICP-AES) detection is proposed. Two on-line successive separation steps are included into this method: a continuous liquid-liquid extraction of Sb(III) with ammonium pyrrolidine dithiocarbamate (APDC) into methylisobuthylketone (MIBK), followed by direct stibine generation from the organic phase. Both separation steps are carried out in a continuous mode and on-line with the ICP-AES detector. Optimization of experimental conditions for the tandem separation and ICP-AES detection are investigated in detail. Detection limits for Sb(III) were 3 ng.mL{sup -1} and for Sb(V) 8 ng.mL{sup -1}. Precisions observed are in the range {+-} 5%. The proposed methodology has been applied to Sb(III) and Sb(V) speciation in sea-water samples. (orig.)

Effect of quasi-particle injection on retrapping current of Josephson junction

OpenAIRE

Utsunomiya, K.; Yagi, Ryuta

2006-01-01

We report that the energy dissipation of Josephson junction can be controlled by quasi-particle injection. We fabricated two Josephson junctions on the narrow aluminum wire and controlled the energy dissipation of one junction by quasi-particle injection from the other. We observed the retrapping current increased as the quasi-particles were injected. We also studied the heating effect of our measurement.

On A Quasi-local Mass

OpenAIRE

Zhang, Xiao

2009-01-01

We modify previous quasi-local mass definition. The new definition provides expressions of the quasi-local energy, the quasi-local linear momentum and the quasi-local mass. And they are equal to the ADM expressions at spatial infinity. Moreover, the new quasi-local energy has the positivity property.

Continuous on-line monitoring of left ventricular function with a new nonimaging detector:validation and clinical use in the evaluation of patients post angioplasty.

Science.gov (United States)

Breisblatt, W M; Schulman, D S; Follansbee, W P

1991-06-01

A new miniaturized nonimaging radionuclide detector (Cardioscint, Oxford, England) was evaluated for the continuous on-line assessment of left ventricular function. This cesium iodide probe can be placed on the patient's chest and can be interfaced to an IBM compatible personal computer conveniently placed at the patient's bedside. This system can provide a beat-to-beat or gated determination of left ventricular ejection fraction and ST segment analysis. In 28 patients this miniaturized probe was correlated against a high resolution gamma camera study. Over a wide range of ejection fraction (31% to 76%) in patients with and without regional wall motion abnormalities, the correlation between the Cardioscint detector and the gamma camera was excellent (r = 0.94, SEE +/- 2.1). This detector system has high temporal (10 msec) resolution, and comparison of peak filling rate (PFR) and time to peak filling (TPFR) also showed close agreement with the gamma camera (PFR, r = 0.94, SEE +/- 0.17; TPFR, r = 0.92, SEE +/- 6.8). In 18 patients on bed rest the long-term stability of this system for measuring ejection fraction and ST segments was verified. During the monitoring period (108 +/- 28 minutes) only minor changes in ejection fraction occurred (coefficient of variation 0.035 +/- 0.016) and ST segment analysis showed no significant change from baseline. To determine whether continuous on-line measurement of ejection fraction would be useful after coronary angioplasty, 12 patients who had undergone a successful procedure were evaluated for 280 +/- 35 minutes with the Cardioscint system.(ABSTRACT TRUNCATED AT 250 WORDS)

Online phase measuring profilometry for rectilinear moving object by image correction

Science.gov (United States)

Yuan, Han; Cao, Yi-Ping; Chen, Chen; Wang, Ya-Pin

2015-11-01

In phase measuring profilometry (PMP), the object must be static for point-to-point reconstruction with the captured deformed patterns. While the object is rectilinearly moving online, the size and pixel position differences of the object in different captured deformed patterns do not meet the point-to-point requirement. We propose an online PMP based on image correction to measure the three-dimensional shape of the rectilinear moving object. In the proposed method, the deformed patterns captured by a charge-coupled diode camera are reprojected from the oblique view to an aerial view first and then translated based on the feature points of the object. This method makes the object appear stationary in the deformed patterns. Experimental results show the feasibility and efficiency of the proposed method.

Online measurement of LHC beam parameters with the ATLAS High Level Trigger

International Nuclear Information System (INIS)

Strauss, E

2012-01-01

We present an online measurement of the LHC beamspot parameters in ATLAS using the High Level Trigger (HLT). When a significant change is detected in the measured beamspot, it is distributed to the HLT. There, trigger algorithms like b-tagging which calculate impact parameters or decay lengths benefit from a precise, up-to-date set of beamspot parameters. Additionally, online feedback is sent to the LHC operators in real time. The measurement is performed by an algorithm running on the Level 2 trigger farm, leveraging the high rate of usable events. Dedicated algorithms perform a full scan of the silicon detector to reconstruct event vertices from registered tracks. The distribution of these vertices is aggregated across the farm and their shape is extracted through fits every 60 seconds to determine the beamspot position, size, and tilt. The reconstructed beamspot values are corrected for detector resolution effects, measured in situ using the separation of vertices whose tracks have been split into two collections. Furthermore, measurements for individual bunch crossings have allowed for studies of single-bunch distributions as well as the behavior of bunch trains. This talk will cover the constraints imposed by the online environment and describe how these measurements are accomplished with the given resources. The algorithm tasks must be completed within the time constraints of the Level 2 trigger, with limited CPU and bandwidth allocations. This places an emphasis on efficient algorithm design and the minimization of data requests.

Introducing a Relationship Marketing perspective in the measurement of Online Community success

OpenAIRE

Nadia Jouini; Ilaria Dalla Pozza

2014-01-01

A relationship marketing perspective is missed in measuring the success of online communities. Scope of this paper is to introduce a relationship marketing perspective in the definition of Key Performance Indicators (KPIs) for measuring the success of onl

Online wave estimation using vessel motion measurements

DEFF Research Database (Denmark)

H. Brodtkorb, Astrid; Nielsen, Ulrik D.; J. Sørensen, Asgeir

2018-01-01

parameters and motion transfer functions are required as input. Apart from this the method is signal-based, with no assumptions on the wave spectrum shape, and as a result it is computationally efficient. The algorithm is implemented in a dynamic positioning (DP)control system, and tested through simulations......In this paper, a computationally efficient online sea state estimation algorithm isproposed for estimation of the on site sea state. The algorithm finds the wave spectrum estimate from motion measurements in heave, roll and pitch by iteratively solving a set of linear equations. The main vessel...

Compactness in quasi-Banach function spaces and applications to compact embeddings of Besov-type spaces

Czech Academy of Sciences Publication Activity Database

Caetano, A.M.; Gogatishvili, Amiran; Opic, B.

2016-01-01

Roč. 146, č. 5 (2016), s. 905-927 ISSN 0308-2105 R&D Projects: GA ČR GA13-14743S Institutional support: RVO:67985840 Keywords : quasi-Banach function space * compactness * compact embedding Subject RIV: BA - General Mathematics Impact factor: 1.158, year: 2016 http:// journals .cambridge.org/action/displayAbstract?fromPage=online&aid=10379393&fileId=S0308210515000761

On-line fast flux measurements in the BR2 reactor

International Nuclear Information System (INIS)

Vermeeren, L.

2009-01-01

Since 2001, CEA-Cadarache and the Belgian Nuclear Research Centre SCK-CEN are collaborating on the development and in-pile qualification of subminiature fission chambers (diameter of 1.5 mm). Initially, efforts concentrated on fission chambers for the in-pile measurement of thermal fluxes (with 235 U as fissile material). Meanwhile successful long-term tests of the prototypes have been performed in various environments: in low temperature (40-100 degress Celsius) BR2 pool water (up to a thermal neutron fluence of 3 1 0 21 n/cm 2 ) and in the CALLISTO PWR loop (300 degrees Celsius, 155 bars). The long-term qualification of derived industrial detectors (Photonis CFUZ53) in CALLISTO is still ongoing. However, for various types of irradiations in research reactors, the knowledge of the evolution of the fast neutron flux is even of more interest than the thermal flux data. Therefore the collaboration program was extended to the development and the in-pile qualification of subminiature or miniature fission chambers (with 3 mm diameter) for fast neutron detection, for which 242 Pu was selected as the optimal fissile material. In order to achieve the on-line in-pile measurement of fast neutron flux, the fission chambers will be operated in the Campbelling mode (based on the mean square fluctuation of the detector current). In this mode the gamma induced contribution to the signal can be efficiently suppressed. Moreover, a data processing software will take into account the evolution of the fissile deposit in order to assess on-line the fast flux sensitivity and to correct for the low energy neutron contributions. The final objective is to qualify a Fast Neutron Detector System (FNDS) able to provide on-line data for local fast neutron fluxes in Material Testing Reactors. The on-line measurement of the fast neutron flux would contribute significantly to the characterization of the irradiation conditions during test experiments with materials and innovative fuel elements

A relativistic theory for continuous measurement of quantum fields

International Nuclear Information System (INIS)

Diosi, L.

1990-04-01

A formal theory for the continuous measurement of relativistic quantum fields is proposed. The corresponding scattering equations were derived. The proposed formalism reduces to known equations in the Markovian case. Two recent models for spontaneous quantum state reduction have been recovered in the framework of this theory. A possible example of the relativistic continuous measurement has been outlined in standard Quantum Electrodynamics. The continuous measurement theory possesses an alternative formulation in terms of interacting quantum and stochastic fields. (author) 23 refs

Fibre optical measuring network based on quasi-distributed amplitude sensors for detecting deformation loads

International Nuclear Information System (INIS)

Kul'chin, Yurii N; Kolchinskiy, V A; Kamenev, O T; Petrov, Yu S

2013-01-01

A new design of a sensitive element for a fibre optical sensor of deformation loads is proposed. A distributed fibre optical measuring network, aimed at determining both the load application point and the load mass, has been developed based on these elements. It is shown that neural network methods of data processing make it possible to combine quasi-distributed amplitude sensors of different types into a unified network. The results of the experimental study of a breadboard of a fibre optical measuring network are reported, which demonstrate successful reconstruction of the trajectory of a moving object (load) with a spatial resolution of 8 cm, as well as the load mass in the range of 1 – 10 kg with a sensitivity of 0.043 kg -1 . (laser optics 2012)

Simple chloride sensors for continuous groundwater monitoring

DEFF Research Database (Denmark)

Thorn, Paul; Mortensen, John

2012-01-01

The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used in continu......The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... concentrations over longer periods. The signal was seen to be stable, with regular drift in both laboratory and field test. In the field application, the sensor signal was corrected for drift, and errors were observed to be under 7% of that of conductivity measurements. The study also found that the chloride...

Moment measurements in dynamic and quasi-static spine segment testing using eccentric compression are susceptible to artifacts based on loading configuration.

Science.gov (United States)

Van Toen, Carolyn; Carter, Jarrod W; Oxland, Thomas R; Cripton, Peter A

2014-12-01

The tolerance of the spine to bending moments, used for evaluation of injury prevention devices, is often determined through eccentric axial compression experiments using segments of the cadaver spine. Preliminary experiments in our laboratory demonstrated that eccentric axial compression resulted in "unexpected" (artifact) moments. The aim of this study was to evaluate the static and dynamic effects of test configuration on bending moments during eccentric axial compression typical in cadaver spine segment testing. Specific objectives were to create dynamic equilibrium equations for the loads measured inferior to the specimen, experimentally verify these equations, and compare moment responses from various test configurations using synthetic (rubber) and human cadaver specimens. The equilibrium equations were verified by performing quasi-static (5 mm/s) and dynamic experiments (0.4 m/s) on a rubber specimen and comparing calculated shear forces and bending moments to those measured using a six-axis load cell. Moment responses were compared for hinge joint, linear slider and hinge joint, and roller joint configurations tested at quasi-static and dynamic rates. Calculated shear force and bending moment curves had similar shapes to those measured. Calculated values in the first local minima differed from those measured by 3% and 15%, respectively, in the dynamic test, and these occurred within 1.5 ms of those measured. In the rubber specimen experiments, for the hinge joint (translation constrained), quasi-static and dynamic posterior eccentric compression resulted in flexion (unexpected) moments. For the slider and hinge joints and the roller joints (translation unconstrained), extension ("expected") moments were measured quasi-statically and initial flexion (unexpected) moments were measured dynamically. In the cadaver experiments with roller joints, anterior and posterior eccentricities resulted in extension moments, which were unexpected and expected, for those

Absolute continuity of autophage measures on finite-dimensional vector spaces

Energy Technology Data Exchange (ETDEWEB)

Raja, C R.E. [Stat-Math Unit, Indian Statistical Institute, Bangalore (India); [Abdus Salam International Centre for Theoretical Physics, Trieste (Italy)]. E-mail: creraja@isibang.ac.in

2002-06-01

We consider a class of measures called autophage which was introduced and studied by Szekely for measures on the real line. We show that the autophage measures on finite-dimensional vector spaces over real or Q{sub p} are infinitely divisible without idempotent factors and are absolutely continuous with bounded continuous density. We also show that certain semistable measures on such vector spaces are absolutely continuous. (author)

Theoretical study and experimental scheme for the generation of a 1064-nm continuous variable entangled light source with quasi-phase-matching PPKTP crystal

International Nuclear Information System (INIS)

Liu, W.Y.; Bi, S.W.

2011-01-01

Beginning from Maxwell's equations, various factors required for the non-degenerate optical parametric amplifier (NOPA) to operate are considered step by step. Analytic expressions are obtained, generated from the experimental parameters and through the numerical simulation of the quantum-correlated spectrum between the signal and the idler modes from the NOPA operating below threshold. On this basis, an experimental program is designed for the generation of a 1064-nm continuous variable entanglement light source with a quasi-phase-matching periodical polarized KTiOPO 4 (PPKTP) crystal through a below-threshold optical parametric down-conversion process. This will play a crucial role in subsequent experiments.

Surface Fitting for Quasi Scattered Data from Coordinate Measuring Systems.

Science.gov (United States)

Mao, Qing; Liu, Shugui; Wang, Sen; Ma, Xinhui

2018-01-13

Non-uniform rational B-spline (NURBS) surface fitting from data points is wildly used in the fields of computer aided design (CAD), medical imaging, cultural relic representation and object-shape detection. Usually, the measured data acquired from coordinate measuring systems is neither gridded nor completely scattered. The distribution of this kind of data is scattered in physical space, but the data points are stored in a way consistent with the order of measurement, so it is named quasi scattered data in this paper. Therefore they can be organized into rows easily but the number of points in each row is random. In order to overcome the difficulty of surface fitting from this kind of data, a new method based on resampling is proposed. It consists of three major steps: (1) NURBS curve fitting for each row, (2) resampling on the fitted curve and (3) surface fitting from the resampled data. Iterative projection optimization scheme is applied in the first and third step to yield advisable parameterization and reduce the time cost of projection. A resampling approach based on parameters, local peaks and contour curvature is proposed to overcome the problems of nodes redundancy and high time consumption in the fitting of this kind of scattered data. Numerical experiments are conducted with both simulation and practical data, and the results show that the proposed method is fast, effective and robust. What's more, by analyzing the fitting results acquired form data with different degrees of scatterness it can be demonstrated that the error introduced by resampling is negligible and therefore it is feasible.

Evaluating the online platform of a blended-learning pharmacist continuing education degree program

Directory of Open Access Journals (Sweden)

Kerry Wilbur

2016-06-01

Full Text Available Background: Distance-based continuing education opportunities are increasingly embraced by health professionals worldwide. Methods: To evaluate the online component of a blended-learning degree program for pharmacists, we conducted a structured self-assessment and peer review using an instrument systematically devised according to Moore's principles of transactional distance. The web-based platform for 14 courses was reviewed by both local and external faculty, followed by shared reflection of individual and aggregate results. Results: Findings indicated a number of course elements for modification to enhance the structure, dialog, and autonomy of the student learning experience. Conclusion: Our process was an important exercise in quality assurance and is worthwhile for other health disciplines developing and delivering distance-based content to pursue.

Online process monitoring at quasi-simultaneous laser transmission welding using a 3D-scanner with integrated pyrometer

Science.gov (United States)

Schmailzl, A.; Steger, S.; Dostalek, M.; Hierl, S.

2016-03-01

Quasi-simultaneous laser transmission welding is a well-known joining technique for thermoplastics and mainly used in the automotive as well as in the medical industry. For process control usually the so called set-path monitoring is used, where the weld is specified as "good" if the irradiation time is inside a defined confidence interval. However, the detection of small-sized gaps or thermal damaged zones is not possible with this technique. The analyzation of the weld seam temperature during welding offers the possibility to overcome this problem. In this approach a 3D-scanner is used instead of a scanner with flat-field optic. By using a pyrometer in combination with a 3D-scanner no color-corrected optic is needed in order to provide that laser- and detection-spot are concentric. Experimental studies on polyethylene T-joints have shown that the quality of the signal is adequate, despite the use of an optical setup with a long working distance and a small optical aperture. The effects on temperature are studied for defects like a gap in the joining zone. Therefore a notch was milled into the absorbent polymer. In case of producing housings for electronic parts the effect of an electrical wire between the joining partners is also investigated. Both defects can be identified by a local temperature deviation even at a feed rate of four meters per second. Furthermore a strategy for signal-processing is demonstrated. By this, remaining defects can be identified. Consequently an online detection of local defects is possible, which makes a dynamic process control feasible.

Introduction to probability and measure theories

International Nuclear Information System (INIS)

Partasarati, K.

1983-01-01

Chapters of probability and measured theories are presented. The Borele images of spaces with the measure into each other and in separate metric spaces are studied. The Kolmogorov theorem on the continuation of probabilies is drawn from the theorem on the measure continuation to the projective limits of spaces with measure. The integration theory is plotted, measures on multiplications of spaces are studied. The theory of conventional mathematical expectations by projections in Hilbert space is presented. In conclusion, the theory of weak convergence of measures of elements of the theory of characteristic functions and the theory of invariant and quasi-invariant measures on groups and homogeneous spaces is given

Convergence acceleration of quasi-periodic and quasi-periodic-rational interpolations by polynomial corrections

OpenAIRE

Lusine Poghosyan

2014-01-01

The paper considers convergence acceleration of the quasi-periodic and the quasi-periodic-rational interpolations by application of polynomial corrections. We investigate convergence of the resultant quasi-periodic-polynomial and quasi-periodic-rational-polynomial interpolations and derive exact constants of the main terms of asymptotic errors in the regions away from the endpoints. Results of numerical experiments clarify behavior of the corresponding interpolations for moderate number of in...

Continuous measures of situation awareness and workload

International Nuclear Information System (INIS)

Droeivoldsmo, Asgeir; Skraaning, Gyrd jr.; Sverrbo, Mona; Dalen, Joergen; Grimstad, Tone; Andresen, Gisle

1998-03-01

This report presents methods for continuous measures for Situation Awareness and Workload. The objective has been to identify, develop and test the new measures, and compare them to instruments that require interruptions of scenarios. The new measures are: (1) the Visual Indicator of Situation Awareness (VISA); where Situation Awareness is scored from predefined areas of visual interest critical for solving scenarios. Visual monitoring of areas was recorded by eye-movement tracking. (2) Workload scores reflected by Extended Dwell Time (EDT) and the operator Activity Level. EDT was calculated from eye-movement data files, and the activity level was estimated from simulator logs. Using experimental data from the 1996 CASH NRC Alarm study and the 1997 Human Error Analysis Project/ Human-Centred Automation study, the new measurement techniques have been tested and evaluated on a preliminary basis. The results showed promising relationships between the new continuous measures of situation awareness and workload, and established instruments based upon scenario interruptions. (author)

Measurement-Device Independency Analysis of Continuous-Variable Quantum Digital Signature

Directory of Open Access Journals (Sweden)

Tao Shang

2018-04-01

Full Text Available With the practical implementation of continuous-variable quantum cryptographic protocols, security problems resulting from measurement-device loopholes are being given increasing attention. At present, research on measurement-device independency analysis is limited in quantum key distribution protocols, while there exist different security problems for different protocols. Considering the importance of quantum digital signature in quantum cryptography, in this paper, we attempt to analyze the measurement-device independency of continuous-variable quantum digital signature, especially continuous-variable quantum homomorphic signature. Firstly, we calculate the upper bound of the error rate of a protocol. If it is negligible on condition that all measurement devices are untrusted, the protocol is deemed to be measurement-device-independent. Then, we simplify the calculation by using the characteristics of continuous variables and prove the measurement-device independency of the protocol according to the calculation result. In addition, the proposed analysis method can be extended to other quantum cryptographic protocols besides continuous-variable quantum homomorphic signature.

An investigation of the parameters affecting continuous on-line neutron activation analysis and its application to process control

International Nuclear Information System (INIS)

Boswell, C.

1977-03-01

A system analysis was made and a description was given of on-line continuous activation analysis. The suitability of the various languages available on the Burroughs B6700 computer for simulation of such systems was assessed. A programme was written in the selected languages to incorporate facilities for specifying the geometry of both activation and detector cells and of the delay line linking the two

Mining online community data: The nature of ideas in online communities

DEFF Research Database (Denmark)

Christensen, Kasper; Liland, Kristian Hovde; Kvaal, Knut

2017-01-01

Ideas are essential for innovation and for the continuous renewal of a firm’s product offerings. Previous research has argued that online communities contain such ideas. Therefore, online communities such as forums, Facebook groups, blogs etc. are potential gold mines for innovative ideas that can...

On-line measurement and control in sustainable mineral processing and energy production

International Nuclear Information System (INIS)

Sowerby, B.D.

2002-01-01

Sustainable development can be defined as development that 'meets the needs of the present without compromising the ability of future generations to meet their own needs' (WCED, 1987). A sustainable minerals and energy industry will need to achieve a number of related objectives including greater energy efficiency, improved utilisation of ore deposits, improved utilisation of existing plant, improved product quality, reduction of waste material, reduction of pollution levels and improved safety margins. These objectives all relate in varying degrees to the triple bottom line of economic, social and environmental benefits. One critical component in achieving these objectives is to develop and apply improved control systems across the full range of industry applications from mining to processing and utilisation. However process control relies heavily on the availability of suitable on-line process instrumentation to provide the data and feedback necessary for its implementation. There is a lot of truth in the saying 'if you can't measure it you can't control it'. In the past measurement was achieved by manual sampling followed by sample preparation (such as drying, mixing, crushing and dividing) and off-line laboratory analysis. However this procedure is often subject to significant sampling errors and, most importantly, the measurements are too slow for control purposes. By contrast, on-line analysis can provide rapid and accurate measurement in real time thus opening up new possibilities for improved process control. As a result, there has been a rapid increase in the industrial application of on-line analysis instrumentation over the past few decades. The main purpose of this paper is to briefly review some past Australian developments of on-line analysis systems in the mineral and coal industries and to discuss present developments and future trends

Tra advergame e mappe online: contaminazioni tra Street View e discorso pubblicitario

Directory of Open Access Journals (Sweden)

Gabriele Ferri

2013-03-01

Full Text Available Molti servizi di cartografia online – Google Maps, Bing Maps, Nokia Maps, Yandex Maps e altri ancora – permettono di esplorare alcuni luoghi da un punto di vista quasi in soggettiva, come se l'utente si trovasse effettivamente sul posto.

The web-buffet--development and validation of an online tool to measure food choice.

Science.gov (United States)

Bucher, Tamara; Keller, Carmen

2015-08-01

To date, no data exist on the agreement of food choice measured using an online tool with subsequent actual consumption. This needs to be shown before food choice, measured by means of an online tool, is used as a dependent variable to examine intake in the general population. A 'web-buffet' was developed to assess food choice. Choice was measured as planned meal composition from photographic material; respondents chose preferred foods and proportions for a main meal (out of a possible 144 combinations) online and the validity was assessed by comparison of a meal composed from a web-buffet with actual food intake 24-48 h later. Furthermore, correlations of food preferences, energy needs and health interest with meals chosen from the web-buffet were analysed. Students: n 106 (Study I), n 32 (Study II). Meals chosen from the web-buffet (mean = 2998 kJ, SD = 471 kJ) agreed with actual consumption (rs = 0.63, P choice in the web-buffet agrees sufficiently well with actual intake to measure food choice as a dependent variable in online surveys. However, we found an average underestimation of subsequent consumption. High correlations of preferences with chosen amounts and an inverse association of health interest with total energy further indicate the validity of the tool. Applications in behavioural nutrition research are discussed.

A massive quasi-particle model of the SU(3) gluon plasma

International Nuclear Information System (INIS)

Peshier, A.; Technische Univ. Dresden; Kaempfer, B.; Technische Univ. Dresden; Pavlenko, O.P.; AN Ukrainskoj SSR, Kiev; Soff, G.

1995-09-01

Recent SU(3) gauge field lattice data for the equation of state are interpreted by a quasi-particle model with effective thermal gluon masses. The model is motivated by lowest-order perturbative QCD and describes very well the data. The proposed quasi-particle approach can be applied to study color excitations in the non-perturbative regime. As an example we estimate the temperature dependence of the Debye screening mass and find that it declines sharply when approaching the confinement temperature from above, while the thermal mass continuously rises. (orig.)

Application Research of Quasi-monochromatic X-ray Machine Replacing 241Am Radioactive Source in Thickness Measurement

Directory of Open Access Journals (Sweden)

LIN Hui1;XIAO Xue-fu2;HOU Yue-xin3;ZHAO Jing1;JIAN Li-min1

2014-02-01

Full Text Available In the research of BS-03 thickness detector, a self-designed quasi-monochromatic (50-60 keV X-ray machine was studied as a substitution to Am-241 low energy photon source（1.11×109 Bq）The range of output current, the attenuation of X rays through the steel plate, the aluminum plate, and the organic glass plate and stability of quasi-monochromatic X-ray machine was tested. The result showed that quasi-monochromatic X-ray machine could be an applicable replacement of Am-241 radioactive source.

Quasi-particle interference of heavy fermions in resonant x-ray scattering.

Science.gov (United States)

Gyenis, András; da Silva Neto, Eduardo H; Sutarto, Ronny; Schierle, Enrico; He, Feizhou; Weschke, Eugen; Kavai, Mariam; Baumbach, Ryan E; Thompson, Joe D; Bauer, Eric D; Fisk, Zachary; Damascelli, Andrea; Yazdani, Ali; Aynajian, Pegor

2016-10-01

Resonant x-ray scattering (RXS) has recently become an increasingly important tool for the study of ordering phenomena in correlated electron systems. Yet, the interpretation of RXS experiments remains theoretically challenging because of the complexity of the RXS cross section. Central to this debate is the recent proposal that impurity-induced Friedel oscillations, akin to quasi-particle interference signals observed with a scanning tunneling microscope (STM), can lead to scattering peaks in RXS experiments. The possibility that quasi-particle properties can be probed in RXS measurements opens up a new avenue to study the bulk band structure of materials with the orbital and element selectivity provided by RXS. We test these ideas by combining RXS and STM measurements of the heavy fermion compound Ce M In 5 ( M = Co, Rh). Temperature- and doping-dependent RXS measurements at the Ce- M 4 edge show a broad scattering enhancement that correlates with the appearance of heavy f -electron bands in these compounds. The scattering enhancement is consistent with the measured quasi-particle interference signal in the STM measurements, indicating that the quasi-particle interference can be probed through the momentum distribution of RXS signals. Overall, our experiments demonstrate new opportunities for studies of correlated electronic systems using the RXS technique.

Quasi-eccentricity error modeling and compensation in vision metrology

Science.gov (United States)

Shen, Yijun; Zhang, Xu; Cheng, Wei; Zhu, Limin

2018-04-01

Circular targets are commonly used in vision applications for its detection accuracy and robustness. The eccentricity error of the circular target caused by perspective projection is one of the main factors of measurement error which needs to be compensated in high-accuracy measurement. In this study, the impact of the lens distortion on the eccentricity error is comprehensively investigated. The traditional eccentricity error turns to a quasi-eccentricity error in the non-linear camera model. The quasi-eccentricity error model is established by comparing the quasi-center of the distorted ellipse with the true projection of the object circle center. Then, an eccentricity error compensation framework is proposed which compensates the error by iteratively refining the image point to the true projection of the circle center. Both simulation and real experiment confirm the effectiveness of the proposed method in several vision applications.

Validation of a high-throughput fermentation system based on online monitoring of biomass and fluorescence in continuously shaken microtiter plates

Directory of Open Access Journals (Sweden)

Kensy Frank

2009-06-01

Full Text Available Abstract Background An advanced version of a recently reported high-throughput fermentation system with online measurement, called BioLector, and its validation is presented. The technology combines high-throughput screening and high-information content by applying online monitoring of scattered light and fluorescence intensities in continuously shaken microtiter plates. Various examples in calibration of the optical measurements, clone and media screening and promoter characterization are given. Results Bacterial and yeast biomass concentrations of up to 50 g/L cell dry weight could be linearly correlated to scattered light intensities. In media screening, the BioLector could clearly demonstrate its potential for detecting different biomass and product yields and deducing specific growth rates for quantitatively evaluating media and nutrients. Growth inhibition due to inappropriate buffer conditions could be detected by reduced growth rates and a temporary increase in NADH fluorescence. GFP served very well as reporter protein for investigating the promoter regulation under different carbon sources in yeast strains. A clone screening of 90 different GFP-expressing Hansenula polymorpha clones depicted the broad distribution of growth behavior and an even stronger distribution in GFP expression. The importance of mass transfer conditions could be demonstrated by varying filling volumes of an E. coli culture in 96 well MTP. The different filling volumes cause a deviation in the culture growth and acidification both monitored via scattered light intensities and the fluorescence of a pH indicator, respectively. Conclusion The BioLector technology is a very useful tool to perform quantitative microfermentations under engineered reaction conditions. With this technique, specific yields and rates can be directly deduced from online biomass and product concentrations, which is superior to existing technologies such as microplate readers or optode

On-line data processing apparatus for spectroscopic measurements of atomic uranium

International Nuclear Information System (INIS)

Miron, E.; Levin, L.A.; Erez, G; Baumatz, D; Goren, I.; Shpancer, I.

1977-01-01

A computer-based apparatus for on-line spectroscopic measurements of atomic uranium is described. The system is capable of enhancing the signal-to-noise ratio by averaging, and performing calculations. Computation flow charts and programs are included

Search for quasi bound η mesons

International Nuclear Information System (INIS)

Machner, H

2015-01-01

The search for a quasi bound η meson in atomic nuclei is reviewed. This tentative state is studied theoretically as well as experimentally. The theory starts from elastic η nucleon scattering which is derived from production data within some models. From this interaction the η nucleus interaction is derived. Model calculations predict binding energies and widths of the quasi bound state. Another method is to derive the η nucleus interaction from excitation functions of η production experiments. The s wave interaction is extracted from such data via final state interaction (FSI) theorem. We give the derivation of s wave amplitudes in partial wave expansion and in helicity amplitudes and their relation to observables. Different experiments extracting the FSI are discussed as are production experiments. So far only three experiments give evidence for the existence of the quasi bound state: a pion double charge exchange experiment, an effective mass measurement, and a transfer reaction at recoil free kinematics with observation of the decay of the state. (topical review)

Adaptive Quasi-Sliding Mode Control for Permanent Magnet DC Motor

Directory of Open Access Journals (Sweden)

Fredy E. Hoyos

2013-01-01

Full Text Available The motor speed of a buck power converter and DC motor coupled system is controlled by means of a quasi-sliding scheme. The fixed point inducting control technique and the zero average dynamics strategy are used in the controller design. To estimate the load and friction torques an online estimator, computed by the least mean squares method, is used. The control scheme is tested in a rapid control prototyping system which is based on digital signal processing for a dSPACE platform. The closed loop system exhibits adequate performance, and experimental and simulation results match.

Online Measurement of LHC Beam Parameters with the ATLAS High Level Trigger

CERN Document Server

Strauss, E; The ATLAS collaboration

2011-01-01

We present an online measurement of the LHC beam parameters in ATLAS using the High Level Trigger (HLT). When a significant change is detected in the measured beamspot, it is distributed to the HLT. There, trigger algorithms like b-tagging which calculate impact parameters or decay lengths benefit from a precise, up-to-date set of beamspot parameters. Additionally, online feedback is sent to the LHC operators in real time. The measurement is performed by an algorithm running on the Level 2 trigger farm, leveraging the high rate of usable events. Dedicated algorithms perform a full scan of the silicon detector to reconstruct event vertices from registered tracks. The distribution of these vertices is aggregated across the farm and their shape is extracted through fits every 60 seconds to determine the beamspot position, size, and tilt. The reconstructed beam values are corrected for detector resolution effects, measured in situ using the separation of vertices whose tracks have been split into two collections....

Online measurement of LHC beam parameters with the ATLAS High Level Trigger

CERN Document Server

Strauss, E; The ATLAS collaboration

2011-01-01

We present an online measurement of the LHC beam parameters in ATLAS using the High Level Trigger (HLT). When a significant change is detected in the measured beamspot, it is distributed to the HLT. There, trigger algorithms like b-tagging which calculate impact parameters or decay lengths benefit from a precise,up-to-date set of beamspot parameters. Additionally, online feedback is sent to the LHC operators in real time. The measurement is performed by an algorithm running on the Level 2 trigger farm, leveraging the high rate of usable events. Dedicated algorithms perform a full scan of the silicon detector to reconstruct event vertices from registered tracks. The distribution of these vertices is aggregated across the farm and their shape is extracted through fits every 60 seconds to determine the beamspot position, size, and tilt. The reconstructed beam values are corrected for detector resolution effects, measured in situ using the separation of vertices whose tracks have been split into two collections. ...

The Effects of Student Question-Generation with Online Prompts on Learning

Science.gov (United States)

Yu, Fu-Yun; Pan, Kuan-Jung

2014-01-01

The focus of this study was to investigate the effects of student-question generation with online prompts on student academic achievement, question-generation performance, learning satisfaction and learning anxiety. This study adopted a quasi-experimental research design. Two classes of eighth grade students (N = 64) from one middle school…

Measuring CO2 emissions induced by online and brick-and-mortar retailing

OpenAIRE

Carling, Kenneth; Han, Mengjie; Håkansson, Johan; Meng, Xiangli; Rudholm, Niklas

2014-01-01

We develop a method for empirically measuring the difference in carbon footprint between traditional and online retailing (“e-tailing”) from entry point to a geographical area to consumer residence. The method only requires data on the locations of brick-and-mortar stores, online delivery points, and residences of the region’s population, and on the goods transportation networks in the studied region. Such data are readily available in most countries, so the method is not country or region sp...

Automated on-line L-edge measurement of SNM concentration for near-real-time accounting

International Nuclear Information System (INIS)

Russo, P.A.; Marks, T. Jr.; Stephens, M.M.; Baker, A.L.; Cobb, D.D.

1982-09-01

An L-edge densitometer has been modified, tested, and demonstrated for on-line assay of special nuclear material concentration in flowing solution streams. The demonstration was part of a larger demonstration of near-real-time nuclear materials accounting during a continuous, week-long, cold operation of the Barnwell facility. The L-edge data were automatically analyzed and the results were transmitted to the materials accounting computer once every 5.5 min for the duration of the cold run. This report compares the results of the L-edge analyses with the delayed results obtained from destructive analysis of samples withdrawn from the same process line. Comparisons are also made with the results obtained in near real time from an automated process control instrument installed in series with the L-edge densitometer. The performance of the L-edge instrument was reliable throughout the continuous operation. The assay precision was consistent with that predicted by the counting statistics of the measurement. The results of the L-edge assays show good agreement with those of the destructive assays. A gradually varying discrepancy (of a few percent) between the L-edge and the process control results remains unexplained

Promoting Continuing Computer Science Education through a Massively Open Online Course

Science.gov (United States)

Oliver, Kevin

2016-01-01

This paper presents the results of a comparison study between graduate students taking a software security course at an American university and international working professionals taking a version of the same course online through a free massive open online course (MOOC) created in the Google CourseBuilder learning environment. A goal of the study…

Establishment of X-ray Measurement System for On-line Monitoring of Water Content in Powder

Energy Technology Data Exchange (ETDEWEB)

Hwang, J. S. [Korea Institute of Industrial Technology, Cheonan (Korea, Republic of); Choi, Y. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Choi, B. J. [Idealsystem Co., Daegu (Korea, Republic of)

2012-05-15

On-line process monitoring is of critical importance in many industries, and therefore a variety of the state-of-the-art physical and chemical measurement techniques have been proposed. But, these techniques have their own pros and cons under the field process environments. Because the field process environments are very different from the well-organized chemical laboratories, many factors should be considered in order to optimize the process monitoring system. However, there have been few studies on the on-line measurement of water content in powder materials. For that reason, the X-ray measurement system based on the X-ray scattering technique, which was first proposed in 2011 as a new method for the determination of water content in powder, has been improved. in the present study, our original X-ray measurement system has been modified for more rapid, simple, and adequate for maximizing the field applicability of the on-line monitoring system

Heterodyne grating interferometer based on a quasi-common-optical-path configuration for a two-degrees-of-freedom straightness measurement

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju-Yi; Hsieh, Hung-Lin; Lerondel, Gilles; Deturche, Regis; Lu, Mini-Pei; Chen, Jyh-Chen

2011-03-20

We present a heterodyne grating interferometer based on a quasi-common-optical-path (QCOP) design for a two-degrees-of-freedom (DOF) straightness measurement. Two half-wave plates are utilized to rotate the polarizations of two orthogonally polarized beams. The grating movement can be calculated by measuring the phase difference variation in each axis. The experimental results demonstrate that our method has the ability to measure two-DOF straightness and still maintain high system stability. The proposed and demonstrated method, which relies on heterodyne interferometric phase measurement combined with the QCOP configuration, has the advantages of high measurement resolution, relatively straightforward operation, and high system stability.

On-line measurement of ski-jumper trajectory: combining stereo vision and shape description

Science.gov (United States)

Nunner, T.; Sidla, O.; Paar, G.; Nauschnegg, B.

2010-01-01

Ski jumping has continuously raised major public interest since the early 70s of the last century, mainly in Europe and Japan. The sport undergoes high-level analysis and development, among others, based on biodynamic measurements during the take-off and flight phase of the jumper. We report on a vision-based solution for such measurements that provides a full 3D trajectory of unique points on the jumper's shape. During the jump synchronized stereo images are taken by a calibrated camera system in video rate. Using methods stemming from video surveillance, the jumper is detected and localized in the individual stereo images, and learning-based deformable shape analysis identifies the jumper's silhouette. The 3D reconstruction of the trajectory takes place on standard stereo forward intersection of distinct shape points, such as helmet top or heel. In the reported study, the measurements are being verified by an independent GPS measurement mounted on top of the Jumper's helmet, synchronized to the timing of camera exposures. Preliminary estimations report an accuracy of +/-20 cm in 30 Hz imaging frequency within 40m trajectory. The system is ready for fully-automatic on-line application on ski-jumping sites that allow stereo camera views with an approximate base-distance ratio of 1:3 within the entire area of investigation.

Phase identification of quasi-periodic flow measured by particle image velocimetry with a low sampling rate

International Nuclear Information System (INIS)

Pan, Chong; Wang, Hongping; Wang, Jinjun

2013-01-01

This work mainly deals with the proper orthogonal decomposition (POD) time coefficient method used for extracting phase information from quasi-periodic flow. The mathematical equivalence between this method and the traditional cross-correlation method is firstly proved. A two-dimensional circular cylinder wake flow measured by time-resolved particle image velocimetry within a range of Reynolds numbers is then used to evaluate the reliability of this method. The effect of both the sampling rate and Reynolds number on the identification accuracy is finally discussed. It is found that the POD time coefficient method provides a convenient alternative for phase identification, whose feasibility in low-sampling-rate measurement has additional advantages for experimentalists. (paper)

Quasi-particles at finite temperatures

International Nuclear Information System (INIS)

Narnhofer, H.; Thirring, W.; Requardt, M.

1983-01-01

We study the consequences of the KMS-condition on the properties of quasi-particles, assuming their existence. We establish: (i) If the correlation functions decay sufficiently, we can create them by quasi-free field operators. (ii) There are many age-operators T conjugate to H. For special forms of the dispersion law epsilon(k) of the quasi-particles there is a T commuting with the; (iii) There are many age-operators T conjugate to H. For special forms of the dispersion law epsilon(k) of the quasi-particles there is a T commuting with the number of quasi-particles and its time-monotonicity describes how the quasi-particles travel to infinity. (orig.)

Experimental measurements of competition between fundamental and second harmonic emission in a quasi-optical gyrotron

International Nuclear Information System (INIS)

Alberti, S.; Pedrozzi, M.; Tran, M.Q.; Hogge, J.P.; Tran, T.M.; Muggli, P.; Joedicke, B.; Mathews, H.G.

1990-04-01

A quasi-optical gyrotron (QOG) designed for operation at the fundamental (Ω ce ≅100 GHz) exhibits simultaneous emission at Ω ce and 2Ω ce (second harmonic). For a beam current of 4 A, 20% of the total RF power is emitted at the second harmonic. The experimental measurements show that the excitation of the second harmonic is only possible when the fundamental is present. The frequency of the second harmonic is locked by the frequency of the fundamental. Experimental evidence shows that when the second harmonic is not excited, total efficiency is enhanced. (author) 6 refs., 5 figs., 1 tab

A new approach of optimal control for a class of continuous-time chaotic systems by an online ADP algorithm

Science.gov (United States)

Song, Rui-Zhuo; Xiao, Wen-Dong; Wei, Qing-Lai

2014-05-01

We develop an online adaptive dynamic programming (ADP) based optimal control scheme for continuous-time chaotic systems. The idea is to use the ADP algorithm to obtain the optimal control input that makes the performance index function reach an optimum. The expression of the performance index function for the chaotic system is first presented. The online ADP algorithm is presented to achieve optimal control. In the ADP structure, neural networks are used to construct a critic network and an action network, which can obtain an approximate performance index function and the control input, respectively. It is proven that the critic parameter error dynamics and the closed-loop chaotic systems are uniformly ultimately bounded exponentially. Our simulation results illustrate the performance of the established optimal control method.

Segregation in quasi-two-dimensional granular systems

International Nuclear Information System (INIS)

Rivas, Nicolas; Cordero, Patricio; Soto, Rodrigo; Risso, Dino

2011-01-01

Segregation for two granular species is studied numerically in a vertically vibrated quasi-two-dimensional (quasi-2D) box. The height of the box is smaller than two particle diameters so that particles are limited to a submonolayer. Two cases are considered: grains that differ in their density but have equal size, and grains that have equal density but different diameters, while keeping the quasi-2D condition. It is observed that in both cases, for vibration frequencies beyond a certain threshold-which depends on the density or diameter ratios-segregation takes place in the lateral directions. In the quasi-2D geometry, gravity does not play a direct role in the in-plane dynamics and gravity does not point to the segregation directions; hence, several known segregation mechanisms that rely on gravity are discarded. The segregation we observe is dominated by a lack of equipartition between the two species; the light particles exert a larger pressure than the heavier ones, inducing the latter to form clusters. This energy difference in the horizontal direction is due to the existence of a fixed point characterized by vertical motion and hence vanishing horizontal energy. Heavier and bigger grains are more rapidly attracted to the fixed point and the perturbations are less efficient in taking them off the fixed point when compared to the lighter grains. As a consequence, heavier and bigger grains have less horizontal agitation than lighter ones. Although limited by finite size effects, the simulations suggest that the two cases we consider differ in the transition character: one is continuous and the other is discontinuous. In the cases where grains differ in mass on varying the control parameter, partial segregation is first observed, presenting many clusters of heavier particles. Eventually, a global cluster is formed with impurities; namely lighter particles are present inside. The transition looks continuous when characterized by several segregation order

Evaluation of the clinical effect of an on-line course for community nurses on post-partum emotional distress: a community-based longitudinal time-series quasi-experiment.

Science.gov (United States)

Thome, Marga; Orlygsdottir, Brynja; Elvarsson, Bjarki Thor

2012-09-01

About 14% of Icelandic women suffer post-partum from frequent depressive symptoms, and of those, 12% also report a high degree of parenting stress. Education of nurses and midwives on post-partum distress is crucial in reducing its degree. The purpose of the study is to evaluate the clinical effect of an on-line course for community nurses on post-partum emotional distress. A community-based, longitudinal, time-series quasi-experiment was conducted in four stages from 2001 to 2005. Mothers attending 16 health centres throughout Iceland and scoring ≥ 12 on the Edinburgh Postnatal Depression Scale (EPDS) at the 9th week post-partum were eligible to participate. Health centres were divided into experimental (EHC) and control centres (CHC), and control centres were crossed over to experimental centres the following year and new control centres recruited. Nurses at EHC attended an on-line course on post-partum emotional distress. Participating mothers answered the EPDS; the Parenting Stress Index/Short form and the Fatigue Scale. Nursing diagnoses and interventions were recorded at all study centres. Of the women who were eligible (n = 163), 57% (n = 93) participated. At baseline, 9 weeks post-partum, there were no significant differences between groups of women in the rate of depressive symptoms, fatigue or parenting stress. Women in all groups improved on all distress indicators over time; however, those from the EHC improved statistically and clinically significantly more on depressive symptoms than those from the CHC. Documentation of particular nursing diagnoses and interventions was significantly more frequent at the EHC, but referrals to specialists were significantly less frequent. On-line education for nurses on post-partum emotional distress is feasible and is related to improvement in post-partum depressive symptoms. © 2011 The Authors. Scandinavian Journal of Caring Sciences © 2011 Nordic College of Caring Science.

An online knowledge resource and questionnaires as a continuing pharmacy education tool to document reflective learning.

Science.gov (United States)

Budzinski, Jason W; Farrell, Barbara; Pluye, Pierre; Grad, Roland M; Repchinsky, Carol; Jovaisas, Barbara; Johnson-Lafleur, Janique

2012-06-18

To assess the use of an electronic knowledge resource to document continuing education activities and reveal educational needs of practicing pharmacists. Over a 38-week period, 67 e-mails were sent to 6,500 Canadian Pharmacists Association (CPhA) members. Each e-mail contained a link to an e-Therapeutics+ Highlight, a factual excerpt of selected content from an online drug and therapeutic knowledge resource. Participants were then prompted to complete a pop-up questionnaire. Members completed 4,140 questionnaires. Participants attributed the information they learned in the Highlights to practice improvements (50.4%), learning (57.0%), and motivation to learn more (57.4%). Reading Highlight excerpts and completing Web-based questionnaires is an effective method of continuing education that could be easily documented and tracked, making it an effective tool for use with e-portfolios.

Chen-Nester-Tung quasi-local energy and Wang-Yau quasi-local mass

Science.gov (United States)

Liu, Jian-Liang; Yu, Chengjie

2017-10-01

In this paper, we show that the Chen-Nester-Tung (CNT) quasi-local energy with 4D isometric matching references is closely related to the Wang-Yau (WY) quasi-local energy. As a particular example, we compute the second variation of the CNT quasi-local energy for axially symmetric Kerr-like spacetimes with axially symmetric embeddings at the obvious critical point (0 , 0) and find that it is a saddle critical point in most of the cases. Also, as a byproduct, we generalize a previous result about the coincidence of the CNT quasi-local energy and Brown-York mass for axially symmetric Kerr-like spacetimes by Tam and the first author Liu and Tam (2016) to general spacetimes.

A Review of Online Partial Discharge Measurement of Large Generators

Directory of Open Access Journals (Sweden)

Yuanlin Luo

2017-10-01

Full Text Available Online partial discharge (PD measurements have long been used as an effective means to assess the condition of the stator windings of large generators. An increase in the use of PD online measurement systems during the last decade is evident. Improvements in the detection capabilities are partly the reason for the increased popularity. Another reason has been the development of digital signal processing techniques. In addition, rapid progress is being made in automated single PD source classification. However, there are still some factors hindering wider application of the system, such as the complex PD mechanism and PD pulse propagation in stator windings, the presence of detrimental noise and disturbances on-site, and multiple PD sources occurring simultaneously. To avoid repetition of past work and to provide an overview for fresh researchers in this area, this paper presents a comprehensive survey of the state-of-the-art knowledge on PD mechanism, PD pulse propagation in stator windings, PD signal detection methods and signal processing techniques. Areas for further research are also presented.

Bell inequalities for continuous-variable measurements

International Nuclear Information System (INIS)

He, Q. Y.; Reid, M. D.; Drummond, P. D.; Cavalcanti, E. G.

2010-01-01

Tests of local hidden-variable theories using measurements with continuous-variable (CV) outcomes are developed, and a comparison of different methods is presented. As examples, we focus on multipartite entangled Greenberger-Horne-Zeilinger and cluster states. We suggest a physical process that produces the states proposed here, and investigate experiments both with and without binning of the continuous variable. In the former case, the Mermin-Klyshko inequalities can be used directly. For unbinned outcomes, the moment-based Cavalcanti-Foster-Reid-Drummond inequalities are extended to functional inequalities by consideration of arbitrary functions of the measurements at each site. By optimizing these functions, we obtain more robust violations of local hidden-variable theories than with either binning or moments. Recent inequalities based on the algebra of quaternions and octonions are compared with these methods. Since the prime advantage of CV experiments is to provide a route to highly efficient detection via homodyne measurements, we analyze the effect of noise and detection losses in both binned and unbinned cases. The CV moment inequalities with an optimal function have greater robustness to both loss and noise. This could permit a loophole-free test of Bell inequalities.

Design of automatic control and measurement software for radioactive aerosol continuity monitor

International Nuclear Information System (INIS)

Mao Yong; Li Aiwu

1997-01-01

The radioactive aerosol continuity measurement is very important for the development of nuclear industry, and it is the major method to measure and find out the leakage of radioactive material. Radioactive aerosol continuity monitor is the advanced method for the radioactive aerosol continuity measurement. With the development of nuclear industry and nuclear power station, it is necessary to design and automatic continuity measurement device. Because of this reason, the authors developed the first unit of radioactive aerosol continuity monitor and adopted the ministry appraisal. The design idea and method of automatic control and measurement for radioactive aerosol continuity monitor are discussed

The online tourist fraud: the new measures of technological investigation in Spain

Directory of Open Access Journals (Sweden)

M.ª Belén AIGE

2017-07-01

Full Text Available The present article is about an examination of the new technological measures for the investigation, created by the Organic Act (Ley Orgánica 13/2015, of 5th of October. These measures will serve us to improve de criminal investigation, especially on those crimes that are done by technological means, but also for the traditional crimes. Specifically, we are going to make an especial reference to the tourist fraud, which affects both consumers and entrepreneurs. This fraud is especially notable in the online contracts, as we will see above, because those contracts have increased the number of online frauds in the last years; in the tourism I am referring to the stealing of personal data and the creation of ghost companies or non-existent offers. In first place, we are going to talk about the advantages and disadvantages of the online contracts, and also about the real necessity of new investigation means that finally have been satisfied with the introduction of the new technological measures of investigation, which we are going to analyse: the computerized undercover agent, the interception of the telematics and telephone communications, the recording of oral communications by electronic devices, the tracking, localization and recording images devices, the registry of mass storage devices and the remote registry of computer equipment. 

Continuous pneumothorax monitoring by remittance measurement

NARCIS (Netherlands)

Beek, J. F.; Sterenborg, H. J.; van Gemert, M. J.

1993-01-01

The feasibility of a noninvasive method, based on a remittance measurement, to monitor continuously for the occurrence of pneumothorax in neonates under ventilation, was investigated through animal experiments. Light from a He-Ne laser (632.8 nm) or a semiconductor laser (790 nm) was incident on the

The Continuous Confrontation of Caregiving as Described in Real-Time Online Group Chat.

Science.gov (United States)

Male, Dana A; Fergus, Karen D; Stephen, Joanne E

2015-01-01

To date, our understanding of the caregiver experience has been informed primarily by guided inquiry in the form of interviews and surveys, yielding information that is limited by the scope of researchers questions. The intent of this study was to explore the experience of caring for a loved one with advanced-stage cancer by means of participant-determined communication, using interactive, text-based transcripts from synchronous online support groups. Grounded theory analysis of the group transcripts yielded the core category continuous confrontation, characterized by major challenges (unrelenting assault, a new us, and the costs of caregiving) and minor triumphs (refuelling and living more intentionally). This unique method of data collection allowed for an especially candid, intersubjective group account of what it is to be a caregiver for an ill loved one without compromising the details that caregivers themselves consider important.

Stability of continuous-time quantum filters with measurement imperfections

Science.gov (United States)

Amini, H.; Pellegrini, C.; Rouchon, P.

2014-07-01

The fidelity between the state of a continuously observed quantum system and the state of its associated quantum filter, is shown to be always a submartingale. The observed system is assumed to be governed by a continuous-time Stochastic Master Equation (SME), driven simultaneously by Wiener and Poisson processes and that takes into account incompleteness and errors in measurements. This stability result is the continuous-time counterpart of a similar stability result already established for discrete-time quantum systems and where the measurement imperfections are modelled by a left stochastic matrix.

Quasi-experimental study designs series-paper 2: complementary approaches to advancing global health knowledge.

Science.gov (United States)

Geldsetzer, Pascal; Fawzi, Wafaie

2017-09-01

Quasi-experiments have been infrequently used in the health sciences. Focusing on health systems implementation research, this article details key advantages of quasi-experiments and argues that they can complement (but not replace) randomized evaluations. Specifically, it may be possible to use a quasi-experiment to study the causal effect of an intervention that cannot feasibly be randomized or that would be unethical (e.g., because the intervention has become the standard of care) to test in a randomized controlled trial (RCT). In addition, because they usually take advantage of routinely collected data, quasi-experiments may be feasible when it is too costly (either financially or in terms of the required time) to carry out a RCT - an important advantage in research on health systems, which vary widely between settings. Nonetheless, we argue that RCTs will continue to be indispensable for implementation research because i) the assumptions needed to establish causality with a quasi-experiment are often unverifiable, ii) available data frequently do not allow for a rigorous quasi-experiment, and iii) randomized designs tend to lend themselves more to informing policy makers of causal effects prior to (or during) the full-scale rollout of an intervention than quasi-experiments. Copyright © 2017 Elsevier Inc. All rights reserved.

Online Advertising

OpenAIRE

Goldfarb, Avi; Tucker, Catherine Elizabeth

2011-01-01

This chapter explores what makes online advertising different from traditional advertising channels. We argue that online advertising differs from traditional advertising channels in two important ways: measurability and targetability. Measurability is higher because the digital nature of online advertising means that responses to ads can be tracked relatively easily. Targetability is higher because data can be automatically tracked at an individual level, and it is relatively easy to show di...

(Quasi-)Poisson enveloping algebras

OpenAIRE

Yang, Yan-Hong; Yao, Yuan; Ye, Yu

2010-01-01

We introduce the quasi-Poisson enveloping algebra and Poisson enveloping algebra for a non-commutative Poisson algebra. We prove that for a non-commutative Poisson algebra, the category of quasi-Poisson modules is equivalent to the category of left modules over its quasi-Poisson enveloping algebra, and the category of Poisson modules is equivalent to the category of left modules over its Poisson enveloping algebra.

GUM approach to uncertainty estimations for online 220Rn concentration measurements using Lucas scintillation cell

International Nuclear Information System (INIS)

Sathyabama, N.

2014-01-01

It is now widely recognized that, when all of the known or suspected components of errors have been evaluated and corrected, there still remains an uncertainty, that is, a doubt about how well the result of the measurement represents the value of the quantity being measured. Evaluation of measurement data - Guide to the expression of Uncertainty in Measurement (GUM) is a guidance document, the purpose of which is to promote full information on how uncertainty statements are arrived at and to provide a basis for the international comparison of measurement results. In this paper, uncertainty estimations following GUM guidelines have been made for the measured values of online thoron concentrations using Lucas scintillation cell to prove that the correction for disequilibrium between 220 Rn and 216 Po is significant in online 220 Rn measurements

Effects of deformation and boron on microstructure and continuous cooling transformation in low carbon HSLA steels

Energy Technology Data Exchange (ETDEWEB)

Jun, H.J. [Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Kang, J.S. [Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of); Seo, D.H. [Technical Research Laboratories, POSCO, Pohang 545-090 (Korea, Republic of); Kang, K.B. [Technical Research Laboratories, POSCO, Pohang 545-090 (Korea, Republic of); Park, C.G. [Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of)]. E-mail: cgpark@postech.ac.kr

2006-04-25

The continuous-cooling-transformation (CCT) diagram and continuous cooled microstructure were investigated for low carbon (0.05 wt.% C) high strength low alloy steels with/without boron. Microstructures observed in continuous cooled specimens were composed of pearlite, quasi-polygonal ferrite, granular bainite, acicular ferrite, bainitic ferrite, lower bainite, and martensite depending on cooling rate and transformation temperature. A rapid cooling rate depressed the formation of pearlite and quasi-polygonal ferrite, which resulted in higher hardness. However, hot deformation slightly increased transformation start temperature, and promoted the formation of pearlite and quasi-polygonal ferrite. Hot deformation also strongly promoted the acicular ferrite formation which did not form under non-deformation conditions. Small boron addition effectively reduced the formation of pearlite and quasi-polygonal ferrite and broadened the cooling rate region for bainitic ferrite and martensite.

A Comparison of Multiscale Permutation Entropy Measures in On-Line Depth of Anesthesia Monitoring.

Science.gov (United States)

Su, Cui; Liang, Zhenhu; Li, Xiaoli; Li, Duan; Li, Yongwang; Ursino, Mauro

2016-01-01

Multiscale permutation entropy (MSPE) is becoming an interesting tool to explore neurophysiological mechanisms in recent years. In this study, six MSPE measures were proposed for on-line depth of anesthesia (DoA) monitoring to quantify the anesthetic effect on the real-time EEG recordings. The performance of these measures in describing the transient characters of simulated neural populations and clinical anesthesia EEG were evaluated and compared. Six MSPE algorithms-derived from Shannon permutation entropy (SPE), Renyi permutation entropy (RPE) and Tsallis permutation entropy (TPE) combined with the decomposition procedures of coarse-graining (CG) method and moving average (MA) analysis-were studied. A thalamo-cortical neural mass model (TCNMM) was used to generate noise-free EEG under anesthesia to quantitatively assess the robustness of each MSPE measure against noise. Then, the clinical anesthesia EEG recordings from 20 patients were analyzed with these measures. To validate their effectiveness, the ability of six measures were compared in terms of tracking the dynamical changes in EEG data and the performance in state discrimination. The Pearson correlation coefficient (R) was used to assess the relationship among MSPE measures. CG-based MSPEs failed in on-line DoA monitoring at multiscale analysis. In on-line EEG analysis, the MA-based MSPE measures at 5 decomposed scales could track the transient changes of EEG recordings and statistically distinguish the awake state, unconsciousness and recovery of consciousness (RoC) state significantly. Compared to single-scale SPE and RPE, MSPEs had better anti-noise ability and MA-RPE at scale 5 performed best in this aspect. MA-TPE outperformed other measures with faster tracking speed of the loss of unconsciousness. MA-based multiscale permutation entropies have the potential for on-line anesthesia EEG analysis with its simple computation and sensitivity to drug effect changes. CG-based multiscale permutation

Quasi-elastic Neutrino Scattering - an Overview

International Nuclear Information System (INIS)

Sobczyk, Jan T.

2011-01-01

A non-technical overview of charge current quasi-elastic neutrino interaction is presented. Many body computations of multinucleon ejection which is proposed to explain recent large axial mass measurements are discussed. A few comments on recent experimental results reported at NuInt11 workshop are included.

Randomized quasi-Monte Carlo simulation of fast-ion thermalization

Science.gov (United States)

Höök, L. J.; Johnson, T.; Hellsten, T.

2012-01-01

This work investigates the applicability of the randomized quasi-Monte Carlo method for simulation of fast-ion thermalization processes in fusion plasmas, e.g. for simulation of neutral beam injection and radio frequency heating. In contrast to the standard Monte Carlo method, the quasi-Monte Carlo method uses deterministic numbers instead of pseudo-random numbers and has a statistical weak convergence close to {O}(N^{-1}) , where N is the number of markers. We have compared different quasi-Monte Carlo methods for a neutral beam injection scenario, which is solved by many realizations of the associated stochastic differential equation, discretized with the Euler-Maruyama scheme. The statistical convergence of the methods is measured for time steps up to 214.

Quasi-Lie algebras and Lie groups

International Nuclear Information System (INIS)

Momo Bangoura

2006-07-01

In this work, we define the quasi-Poisson Lie quasigroups, dual objects to the quasi-Poisson Lie groups and we establish the correspondence between the local quasi-Poisson Lie quasigoups and quasi-Lie bialgebras (up to isomorphism). (author) [fr

Strategies for online test security.

Science.gov (United States)

Hart, Leigh; Morgan, Lesley

2009-01-01

As online courses continue to increase, maintaining academic integrity in student evaluation is a challenge. The authors review several strategies, with varying degrees of cost and technology, to improve test security in the online classroom.

Wiris Quizzes: a continuous assessment system with automatic feedback for online mathematics

Directory of Open Access Journals (Sweden)

Remei Calm

2013-08-01

Full Text Available 0 0 1 148 815 USAL 6 1 962 14.0 Normal 0 21 false false false ES JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ES; mso-fareast-language:EN-US;} In online engineering studies, the monitoring of the learning process as well as the assessment system are key aspects of teaching strategy. This paper examines a continuous assessment system with automatic feedback. It is based on Wiris Quizzes taken over the semester in a Mathematical Analysis course at the Open University of Catalonia. These tests, with parameterized statements, are completed in the Moodle environment with the symbolic calculator program Wiris (www.wiris.com. The results of the teaching experience in a virtual classroom with 65 students and the comparison with earlier semesters are clearly positive: (a the number of students who follow continuous assessment remains stable; (b the average of the continuous assessment marks increases considerably; (c the number of students who fail has been reduced significantly, and (d the satisfaction level of students regarding the subject, its contents and resources has improved notably.

Pressure prediction model based on artificial neural network optimized by genetic algorithm and its application in quasi-static calibration of piezoelectric high-pressure sensor.

Science.gov (United States)

Gu, Tingwei; Kong, Deren; Jiang, Jian; Shang, Fei; Chen, Jing

2016-12-01

This paper applies back propagation neural network (BPNN) optimized by genetic algorithm (GA) for the prediction of pressure generated by a drop-weight device and the quasi-static calibration of piezoelectric high-pressure sensors for the measurement of propellant powder gas pressure. The method can effectively overcome the slow convergence and local minimum problems of BPNN. Based on test data of quasi-static comparison calibration method, a mathematical model between each parameter of drop-weight device and peak pressure and pulse width was established, through which the practical quasi-static calibration without continuously using expensive reference sensors could be realized. Compared with multiple linear regression method, the GA-BPNN model has higher prediction accuracy and stability. The percentages of prediction error of peak pressure and pulse width are less than 0.7% and 0.3%, respectively.

Compression dynamics of quasi-spherical wire arrays with different linear mass profiles

International Nuclear Information System (INIS)

Mitrofanov, K. N.; Aleksandrov, V. V.; Gritsuk, A. N.; Grabovski, E. V.; Frolov, I. N.; Laukhin, Ya. N.; Oleinik, G. M.; Ol’khovskaya, O. G.

2016-01-01

Results of experimental studies of the implosion of quasi-spherical wire (or metalized fiber) arrays are presented. The goal of the experiments was to achieve synchronous three-dimensional compression of the plasma produced in different regions of a quasi-spherical array into its geometrical center. To search for optimal synchronization conditions, quasi-spherical arrays with different initial profiles of the linear mass were used. The following dependences of the linear mass on the poloidal angle were used: m_l(θ) ∝ sin"–"1θ and m_l(θ) ∝ sin"–"2θ. The compression dynamics of such arrays was compared with that of quasi-spherical arrays without linear mass profiling, m_l(θ) = const. To verify the experimental data, the spatiotemporal dynamics of plasma compression in quasi-spherical arrays was studied using various diagnostics. The experiments on three-dimensional implosion of quasi-spherical arrays made it possible to study how the frozen-in magnetic field of the discharge current penetrates into the array. By measuring the magnetic field in the plasma of a quasi-spherical array, information is obtained on the processes of plasma production and formation of plasma flows from the wire/fiber regions with and without an additionally deposited mass. It is found that penetration of the magnetic flux depends on the initial linear mass profile m_l(θ) of the quasi-spherical array. From space-resolved spectral measurements and frame imaging of plasma X-ray emission, information is obtained on the dimensions and shape of the X-ray source formed during the implosion of a quasi-spherical array. The intensity of this source is estimated and compared with that of the Z-pinch formed during the implosion of a cylindrical array.

Problems in continuous dose rate measurement

International Nuclear Information System (INIS)

Yoshioka, Mitsuo

1983-01-01

The system of continuous dose rate measurement in Fukui Prefecture is described. A telemeter system was constructed in October, 1976, and it has been operated since 1977. Observation has been made at 11 observation stations in the Prefecture. In addition to the continuous measurement of dose rate by using NaI(T1)-DBM systems, the ionization chambers for high dose rate were installed, and also meteorological data have been collected. The detectors are covered with 1 mm thick aluminum designed so that the absorption of external radiation is kept as small as possible. To keep the environmental temperature of the detectors constant, constant temperature wind blow is made. With these consideration, the measurement of Xe-133 is possible, and the standard deviation of yearly dose is around 0.4 mR/Y. By measuring DBM transmission rate, the contribution of Xe-133, which comes from the exhaust pumps in power plants, can be detected. The problems of this system are as follows. First of all, the characteristics of the system must meet the purpose of dose monitoring. The system must detect the dose less than the target value to be achieved. The second is the selection of measuring systems to be set. The system is still not unified, and it is difficult to exchange data between different stations. Finally, the method of data analysis is not yet unified. Manuals or guide-books for this purpose are necessary for the mutual comparison of the data from the stations in different districts. (Kato, T.)

A Minimum Leakage Quasi-Static RAM Bitcell

Directory of Open Access Journals (Sweden)

Adam Teman

2011-05-01

Full Text Available As SRAMs continue to grow and comprise larger percentages of the area and power consumption in advanced systems, the need to minimize static currents becomes essential. This brief presents a novel 9T Quasi-Static RAM Bitcell that provides aggressive leakage reduction and high write margins. The quasi-static operation method of this cell, based on internal feedback and leakage ratios, minimizes static power while maintaining sufficient, albeit depleted, noise margins. This paper presents the concept of the novel cell, and discusses the stability of the cell under hold, read and write operations. The cell was implemented in a low-power 40 nm TSMC process, showing as much as a 12× reduction in leakage current at typical conditions, as compared to a standard 6T or 8T bitcell at the same supply voltage. The implemented cell showed full functionality under global and local process variations at nominal and low voltages, as low as 300 mV.

Improvement of Hand Hygiene Quality and Compliance Using Bioburden Measurement and Online Feedback in Germany.

Science.gov (United States)

Günther, Frank; Rudolph, Kai; Frank, Uwe; Mutters, Nico T

2017-01-01

To improve compliance with hand hygiene, a novel method with inclusion of an online reporting system was developed, comprising measurement of total hand bioburden, anonymous online feedback, and onsite training. The intervention significantly improved both compliance and quality of hand hygiene and reduced Staphylococcus aureus incidence. Infect Control Hosp Epidemiol 2016;1-4.

Measuring structural similarity in large online networks.

Science.gov (United States)

Shi, Yongren; Macy, Michael

2016-09-01

Structural similarity based on bipartite graphs can be used to detect meaningful communities, but the networks have been tiny compared to massive online networks. Scalability is important in applications involving tens of millions of individuals with highly skewed degree distributions. Simulation analysis holding underlying similarity constant shows that two widely used measures - Jaccard index and cosine similarity - are biased by the distribution of out-degree in web-scale networks. However, an alternative measure, the Standardized Co-incident Ratio (SCR), is unbiased. We apply SCR to members of Congress, musical artists, and professional sports teams to show how massive co-following on Twitter can be used to map meaningful affiliations among cultural entities, even in the absence of direct connections to one another. Our results show how structural similarity can be used to map cultural alignments and demonstrate the potential usefulness of social media data in the study of culture, politics, and organizations across the social and behavioral sciences. Copyright © 2016 Elsevier Inc. All rights reserved.

Robust on-line monitoring of biogas processes; Robusta maettekniker on-line foer optimerad biogasproduktion

Energy Technology Data Exchange (ETDEWEB)

Nordberg, Aake; Hansson, Mikael; Kanerot, Mija; Krozer, Anatol; Loefving, Bjoern; Sahlin, Eskil

2010-03-15

Although demand for biomethane in Sweden is higher than ever, many Swedish codigestion plants are presently operated below their designed capacity. Efforts must be taken to increase the loading rate and guarantee stable operation and high availability of the plants. There are currently no commercial systems for on-line monitoring, and due to the characteristics of the material, including corrosion and tearing, robust applications have to be developed. The objective of this project was to identify and study different monitoring technologies with potential for on-line monitoring of both substrate mixtures and anaerobic digester content. Based on the prerequisites and demands at Boraas Energi och Miljoe AB's (BEMAB, the municipal energy and waste utility in the city of Boraas, Sweden) biogas plant, the extent of the problems, measurement variables and possible ways of managing these issues have been identified and prioritized. The substrate mixtures in question have a high viscosity and are inhomogeneous with variation in composition, which calls for further homogenization, dilution and filtration to achieve high precision in the necessary analyses. Studies of using different mixers and mills showed that the particle size (800 mum) needed for on-line COD measurement could not be achieved. The problem of homogenization can be avoided if indirect measurement methods are used. Laboratory tests with NIR (near-infra red spectroscopy) showed that VS can be predicted (R2=0,78) in the interval of 2-9% VS. Furthermore, impedance can give a measurement of soluble components. However, impedance is not sensitive enough to give a good measurement of total TS. Microwave technology was installed at the production plant and showed a faster response to changes in TS than the existing TS-sensor. However, due to technical problems, the evaluation only could be done during a limited period of ten days. BEMAB will continue the measurements and evaluation of the instrument. The

Hermitian self-dual quasi-abelian codes

Directory of Open Access Journals (Sweden)

Herbert S. Palines

2017-12-01

Full Text Available Quasi-abelian codes constitute an important class of linear codes containing theoretically and practically interesting codes such as quasi-cyclic codes, abelian codes, and cyclic codes. In particular, the sub-class consisting of 1-generator quasi-abelian codes contains large families of good codes. Based on the well-known decomposition of quasi-abelian codes, the characterization and enumeration of Hermitian self-dual quasi-abelian codes are given. In the case of 1-generator quasi-abelian codes, we offer necessary and sufficient conditions for such codes to be Hermitian self-dual and give a formula for the number of these codes. In the case where the underlying groups are some $p$-groups, the actual number of resulting Hermitian self-dual quasi-abelian codes are determined.

Remote online process measurements by a fiber optic diode array spectrometer

International Nuclear Information System (INIS)

Van Hare, D.R.; Prather, W.S.; O'Rourke, P.E.

1986-01-01

The development of remote online monitors for radioactive process streams is an active research area at the Savannah River Laboratory (SRL). A remote offline spectrophotometric measurement system has been developed and used at the Savannah River Plant (SRP) for the past year to determine the plutonium concentration of process solution samples. The system consists of a commercial diode array spectrophotometer modified with fiber optic cables that allow the instrument to be located remotely from the measurement cell. Recently, a fiber optic multiplexer has been developed for this instrument, which allows online monitoring of five locations sequentially. The multiplexer uses a motorized micrometer to drive one of five sets of optical fibers into the optical path of the instrument. A sixth optical fiber is used as an external reference and eliminates the need to flush out process lines to re-reference the spectrophotometer. The fiber optic multiplexer has been installed in a process prototype facility to monitor uranium loading and breakthrough of ion exchange columns. The design of the fiber optic multiplexer is discussed and data from the prototype facility are presented to demonstrate the capabilities of the measurement system

Quasi-periodic solutions of nonlinear beam equations with quintic quasi-periodic nonlinearities

Directory of Open Access Journals (Sweden)

Qiuju Tuo

2015-01-01

Full Text Available In this article, we consider the one-dimensional nonlinear beam equations with quasi-periodic quintic nonlinearities $$ u_{tt}+u_{xxxx}+(B+ \\varepsilon\\phi(tu^5=0 $$ under periodic boundary conditions, where B is a positive constant, $\\varepsilon$ is a small positive parameter, $\\phi(t$ is a real analytic quasi-periodic function in t with frequency vector $\\omega=(\\omega_1,\\omega_2,\\dots,\\omega_m$. It is proved that the above equation admits many quasi-periodic solutions by KAM theory and partial Birkhoff normal form.

On-line and precise measurement of iron wear using thin layer activation reactions by proton beam

International Nuclear Information System (INIS)

Kosako, Toshiso; Nishimura, Kazuo.

1990-01-01

For the purpose of the on-line measurement of iron wear, thin layer activation (TLA) method or surface layer activation (SLA) method has been carried out since early 1970s. This method uses the irradiation of charged particle beam like protons from an accelerator onto a metal surface to produce a thin activated layer of several tens μm. The wear of this activated layer is measured by nondestructive on-line method with a radiation detector. There are two methods of the measurement. One is the activity loss measurement on the surface, and the other is the activity measurement of the metal debris collected in a filter. The former method is considered here. The purpose it to measure the wear of engine cam noses to help the development of good engine oil. Proton beam irradiation with a tandem van de Graaff accelerator, wear calibration using a gamma ray spectrometer, on-line wear measurement of cam noses of car engines by TLA method and so on are reported. The 7.00 MeV proton beam from a van de Graaff accelerator was used for activation, and Co-56, Co-57 and Co-58 were obtained in thin layers. (K.I.)

Developing Asthma-Friendly Childcare Centers with Online Training and Evaluation

Directory of Open Access Journals (Sweden)

Alexandra Catherine Hayes Nowakowski

2016-03-01

Full Text Available In 2011, the Florida Asthma Coalition began offering its Asthma-Friendly Childcare Center training online. This course teaches childcare center employees the fundamentals of effective asthma management. It covers basic asthma physiology, ways to recognize asthma attacks, techniques to help children experiencing attacks, and strategies to create healthy environments for asthmatics. A team of health services researchers evaluated both years of the online training. Evaluators used a quasi-experimental design with pretest, posttest, and follow-up assessment. Questions measured knowledge gain and retention, user satisfaction, and implementation of management strategies. Over 650 people from nearly all 67 Florida counties took AFCC training online between 2011 and 2013. Test scores improved by a minimum of 11 percentage points in all program years evaluated. Gains in both knowledge and confidence were substantial and highly significant across years. While individual trainees did forget some content on follow-up, they seemed to retain the specific messages most relevant for their own workplaces. Most trainees also planned to implement multiple management strategies recommended by the training.A large majority of participants rated the training as excellent on all quality metrics, including relevance of content and time efficiency of the online format. Nearly all respondents perceived the training as useful for both providing improved care and fulfilling licensure or certification requirements. Many participants also indicated that their centers would pursue formal certification as AFCCs via the program offered by FAC. The online AFCC course performed strongly in its first years, yielding both high participant satisfaction and substantial improvement in workplace asthma management activity. This training holds promise for introducing and improving multidimensional asthma management strategies at childcare facilities nationwide.

Continuous COD measurement in sewage receipts at sewage treatment plants; Kontinuierliche CSB-Messung im Klaeranlagenzulauf

Energy Technology Data Exchange (ETDEWEB)

Pirsing, A. [Siemens AG, Anlagentechnik/Wasserwirtschaft (ATD TD ISA 6), Karlsruhe (Germany)

1997-11-01

Neural networks are a new instrument in process automation. Contrary to conventional methods, they can dispense with theoretical models. This independence from mathematical models is one of their most important advantages. The article describes how typical sewage parameters can be measured on-line by means of neural networks. On-line measurement of parameters of pollution, for instance COD in sewage, permits new automatic control strategies for the operation of a sewage treatment plant, aiming at the reduction of pollutant freights with simultaneous minimization of operating cost. (orig./SR)

Student Voices Speak Quality Assurance: Continual Improvement in Online Social Work Education

Science.gov (United States)

Secret, Mary; Bentley, Kia J.; Kadolph, Jessie C.

2016-01-01

As social work education expands instruction through the rise of distance education, educators seek new ways to improve quality in online courses. Quality assurance standards and student feedback offer valuable insights to ensure satisfying and effective online learning experiences. An examination of these two assessment approaches concurrently in…

Continual Online Evolutionary Planning for In-Game Build Order Adaptation in StarCraft

DEFF Research Database (Denmark)

Justesen, Niels Orsleff; Risi, Sebastian

2017-01-01

able to switch between predefined strategies, which makes it hard to adapt to new situations. This paper introduces an evolutionary-based method to overcome this challenge, called Continual Online Evolutionary Planning (COEP), which is able to perform in-game adaptive build-order planning. COEP......The real-time strategy game StarCraft has become an important benchmark for AI research as it poses a complex environment with numerous challenges. An important strategic aspect in this game is to decide what buildings and units to produce. StarCraft bots playing in AI competitions today are only...... was added to an open source StarCraft bot called UAlbertaBot and is able to outperform the built-in bots in the game as well as being competitive against a number of scripted opening strategies. The COEP augmented bot can change its build order dynamically and quickly adapt to the opponent’s strategy....

Online measurement of mental representations of complex spatial decision problems : comparison of CNET and hard laddering

NARCIS (Netherlands)

Horeni, O.; Arentze, T.A.; Dellaert, B.G.C.; Timmermans, H.J.P.

2014-01-01

This paper introduces the online Causal Network Elicitation Technique (CNET), as a technique for measuring components of mental representations of choice tasks and compares it with the more common technique of online 'hard' laddering (HL). While CNET works in basically two phases, one in open

A New Energy Efficiency Measure for Quasi-Static MIMO Channels

OpenAIRE

Belmega , Elena Veronica; Lasaulce , Samson; Debbah , Merouane; Hjorungnes , Are

2009-01-01

International audience; In this paper, we consider the multiple input multiple out- put (MIMO) quasi static channel. Our objective is to study the power allocation (over the transmit antennas) problem where not only the performance with respect to (w.r.t.) the transmission reliability but also the cost in terms of the consumed power is accounted for. We first review the existing results w.r.t energy effciency functions (benefit per cost) which focus mainly on the single input single output (S...

Utilization of online-analysis of ashes in the power plant Neurath; Verwendung der Online-Ascheanalyse im Kraftwerk Neurath

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, Horst [RWE Power, Neurath (Germany); Gocht, Dietmar [Evonik Energy Services GmbH, Essen (Germany)

2008-07-01

The authors of the contribution under consideration report on the use of on-line ash analysis in the power station Neurath (Federal Republic of Germany). On the basis of concrete data from the plant operation it is shown, how the complex closed-loop-monitoring of soot blowing adjusts the effects of changing coal qualities on the contamination reliably. The system preventively reacts to alterations of the coal qualities, since the analyses are accessible online. It has been shown during the continuous operation of the power station that the soot blowing can be accomplished further automatically by these measures also under altered circumstances due to the changing coal qualities. Thus, the personnel of the power station is relieved clearly.

Randomized quasi-Monte Carlo simulation of fast-ion thermalization

International Nuclear Information System (INIS)

Höök, L J; Johnson, T; Hellsten, T

2012-01-01

This work investigates the applicability of the randomized quasi-Monte Carlo method for simulation of fast-ion thermalization processes in fusion plasmas, e.g. for simulation of neutral beam injection and radio frequency heating. In contrast to the standard Monte Carlo method, the quasi-Monte Carlo method uses deterministic numbers instead of pseudo-random numbers and has a statistical weak convergence close to O(N -1 ), where N is the number of markers. We have compared different quasi-Monte Carlo methods for a neutral beam injection scenario, which is solved by many realizations of the associated stochastic differential equation, discretized with the Euler-Maruyama scheme. The statistical convergence of the methods is measured for time steps up to 2 14 . (paper)

Pedagogical Perspectives for the Online Education Skeptic

Science.gov (United States)

Brewer, Pam Estes; Brewer, Edward C.

2015-01-01

While online programs continue to grow at an astounding rate in higher education, many faculty remain skeptical of the efficacy of online models. This article provides an overview of some significant benefits of online education while recognizing some common concerns. An examination of the current literature and the authors' own online experiences…

Online measuring devices at sewage treatment plants - state of the art and future market potential; On-Line-Messtechnik auf Klaeranlagen - Aktueller Stand und Marktpotential fuer die Zukunft

Energy Technology Data Exchange (ETDEWEB)

Baumann, P [Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft der Univ. Stuttgart, Abt. Abwassertechnik (Germany); Schlegel, S [Emschergenossenschaft, Essen (Germany)

1998-12-31

By means of a survey commissioned by ATV/GFA, the purposes of use and spheres of use as well as the operating experience with online measuring devices for the determination of ammonium, oxidized nitrogen compounds and orthophosphate were established and evaluated. In addition, data were acquired with the aid of other units for the continuous recording of chemical and physical parameters of sewage treatment. Finally, the future market potentials and development pospects of online measuring devices were evaluated. (orig.) [Deutsch] Anhand einer im Auftrag der ATV/GFA durchgefuehrten Umfrage wurden Einsatzzweck, Einsatzbereiche und Betriebserfahrungen von On-line-Messgeraeten zur Bestimmung von Ammonium, oxidierten Stickstoffverbindungen und Orthophosphat dargestellt und bewertet. Zusaetzlich wurden auch Daten von anderen Geraeteeinheiten zur kontinuierlichen Erfassung von chemischen und physikalischen Parametern bei der Abwasserreinigung erhoben. Anschliessend wurde das zukuenftige Marktpotential und die Entwicklungsmoeglichkeiten bei der On-line-Messtechnik bewertet. (orig.)

Online measuring devices at sewage treatment plants - state of the art and future market potential; On-Line-Messtechnik auf Klaeranlagen - Aktueller Stand und Marktpotential fuer die Zukunft

Energy Technology Data Exchange (ETDEWEB)

Baumann, P. [Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft der Univ. Stuttgart, Abt. Abwassertechnik (Germany); Schlegel, S. [Emschergenossenschaft, Essen (Germany)

1997-12-31

By means of a survey commissioned by ATV/GFA, the purposes of use and spheres of use as well as the operating experience with online measuring devices for the determination of ammonium, oxidized nitrogen compounds and orthophosphate were established and evaluated. In addition, data were acquired with the aid of other units for the continuous recording of chemical and physical parameters of sewage treatment. Finally, the future market potentials and development pospects of online measuring devices were evaluated. (orig.) [Deutsch] Anhand einer im Auftrag der ATV/GFA durchgefuehrten Umfrage wurden Einsatzzweck, Einsatzbereiche und Betriebserfahrungen von On-line-Messgeraeten zur Bestimmung von Ammonium, oxidierten Stickstoffverbindungen und Orthophosphat dargestellt und bewertet. Zusaetzlich wurden auch Daten von anderen Geraeteeinheiten zur kontinuierlichen Erfassung von chemischen und physikalischen Parametern bei der Abwasserreinigung erhoben. Anschliessend wurde das zukuenftige Marktpotential und die Entwicklungsmoeglichkeiten bei der On-line-Messtechnik bewertet. (orig.)

Online measurement of mental representations of complex spatial decision problems : Comparison of CNET and hard laddering

NARCIS (Netherlands)

O. Horeni (Oliver); T.A. Arentze (Theo); B.G.C. Dellaert (Benedict); H.J.P. Timmermans (Harry)

2013-01-01

textabstractThis paper introduces the online Causal Network Elicitation Technique (CNET), as a technique for measuring components of mental representations of choice tasks and compares it with the more common technique of online ‘hard’ laddering (HL). While CNET works in basically two phases, one in

Quasi-periodic motions in families of dynamical systems order amidst chaos

CERN Document Server

Broer, Hendrik W; Sevryuk, Mikhail B

1996-01-01

This book is on Kolmogorov-Arnol'd-Moser theory for quasi-periodic tori in dynamical systems. It gives an up-to-date report on the role parameters play for persis- tence of such tori, typically occuring on Cantor sets of positive Hausdorff measure inside phase and parameter space. The cases with preservation of symplectic or volume forms or time-reversal symmetries are included. The concepts of Whitney-smoothness and Diophantine approximation of Cantor sets on submanifolds of Euclidean space are treated, as well as Bruno's theory on analytic continuation of tori. Partly this material is new to Western mathematicians. The reader should be familiar with dynamical systems theory, differen- tial equations and some analysis. The book is directed to researchers, but its entrance level is introductory.

Impact of a debate on pharmacy students' views of online pharmacy practice.

Science.gov (United States)

Bussières, Jean-François; Delicourt, Anais; Belaid, Nedjma; Quirion, Marie-Pierre; Desroches, Julien; Bégin, Josiane; Fragasso-Marquis, Anne-Marie; Lamarre, Diane

2012-12-01

To evaluate the impact of a debate on pharmacy students' perceptions, using online pharmacy practice as the debate topic. This is a quasi-experimental interrupted time-series study. A 60 min debate was organized as a lunchtime meeting. A four-category Likert scale questionnaire (fully agree, partially agree, partially disagree, fully disagree) measured the debate participants' level of agreement with 25 statements (main issues associated with online pharmacy) in the pre-phase (before the debate), post-phase 1 (after the debate) and post-phase 2 (6 months after the debate). One hundred and seventy-seven students were recruited (response rate of 100% in the pre-phase and post-phase 1, 31% in post-phase 2). Four questions measured the perceptions of the students on this pedagogical technique. The overall proportion of respondents in favour of online pharmacy practice showed little variation among the three phases. However, on average (mean ± SD) 43 ± 8% of the respondents changed their opinion, 21 ± 7% reversed their opinion, 22 ± 4% nuanced their opinion and 1 ± 1% radically changed their opinion. Respectively 98% (post-phase 1) and 96% (post-phase 2) of the respondents were of the opinion that debate was a very useful teaching formula in their pharmacist training and 79 and 66% thought debate significantly changed their opinion of the issue. Few data have been collected on the use of debates as part of healthcare professional training. The impact of a debate on how pharmacy students feel about online pharmacy practice is described. © 2012 The Authors. IJPP © 2012 Royal Pharmaceutical Society.

Learning Online Alignments with Continuous Rewards Policy Gradient

OpenAIRE

Luo, Yuping; Chiu, Chung-Cheng; Jaitly, Navdeep; Sutskever, Ilya

2016-01-01

Sequence-to-sequence models with soft attention had significant success in machine translation, speech recognition, and question answering. Though capable and easy to use, they require that the entirety of the input sequence is available at the beginning of inference, an assumption that is not valid for instantaneous translation and speech recognition. To address this problem, we present a new method for solving sequence-to-sequence problems using hard online alignments instead of soft offlin...

Capacity of Wavelength and Time Division Multiplexing for Quasi-Distributed Measurement Using Fiber Bragg Gratings

Directory of Open Access Journals (Sweden)

Marcel Fajkus

2015-01-01

Full Text Available In this paper, an analysis of the use of wavelength and time division multiplexing techniques for quasi-distributed measurement in uniform fiber Bragg gratings is presented. To date, publications have concentrated on the determination of the maximum number of fiber Bragg gratings on one optical fiber using wavelength and time division multiplexing. In this paper, these techniques will be extended to determine the spectral width of wavelength division multiplexing in terms of the spectral width of the light emitting diode, the spectral width of the Bragg gratings, the measurement ranges of the individual sensors, and the guard band between two adjacent Bragg gratings. For time division multiplexing, a description of the time and power conditions are given. In particular the reflected power, first order crosstalk and chromatic dispersion have been considered. Finally, these relationships were applied to verify a design in a simulation using OptiSystem software.

Quasi-perpendicular/quasi-parallel divisions of Earth's bow shock

International Nuclear Information System (INIS)

Greenstadt, E.W.

1991-01-01

Computer-drawn diagrams of the boundaries between quasi-perpendicular and quasi-parallel areas of Earth's bow shock are displayed for a few selected cone angles of static interplanetary magnetic field (IMF). The effect on the boundary of variable IMF in the foreshock is also discussed and shown for one nominal case. The boundaries demand caution in applying them to the realistic, dynamic conditions of the solar wind and in interpreting the effects of small cone angles on the distributions of structures at the shock. However, the calculated, first-order boundaries are helpful in defining areas of the shock where contributions from active structures inherent in quasi-parallel geometry may be distinguishable from those derived secondarily from upstream reflected ion dynamics. The boundaries are also compatible with known behavior of daytime ULF geomagnetic waves and pulsations according to models postulating that cone angle-controlled, time-dependent ULF activity around the subsolar point of the bow shock provides the source of geomagnetic excitation

Supporting Wellness in Adult Online Education

Science.gov (United States)

Thompson, Jacklyn J.; Porto, Stella C. S.

2014-01-01

Online education cannot continue to grow at the current pace while ignoring a crucial component of campus support, wellness for adult online learners. This paper brings awareness to the concept of wellness as an important student support service in adult online education. It includes a summarized review of relevant literature and identifies…

The Effects of a Systematically Designed Online Learning Environment on Preservice Teachers' Professional Knowledge

Science.gov (United States)

Evens, Marie; Larmuseau, Charlotte; Dewaele, Katrien; Van Craesbeek, Leen; Elen, Jan; Depaepe, Fien

2017-01-01

This study examines the effects of an online learning environment on preservice teachers' pedagogical content knowledge (PCK), content knowledge (CK) (related to French in primary teacher education), and pedagogical knowledge (PK) in a quasi-experimental design. More specifically, the following research question is addressed: Is a systematically…

Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

International Nuclear Information System (INIS)

Kumar, P.; Martin, H.; Jiang, X.

2016-01-01

Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm.

Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

Energy Technology Data Exchange (ETDEWEB)

Kumar, P.; Martin, H.; Jiang, X. [EPSRC Centre for Innovative Manufacturing in Advanced Metrology, University of Huddersfield, Huddersfield HD1 3DH (United Kingdom)

2016-06-15

Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm.

Thermodynamics of quasi-topological cosmology

International Nuclear Information System (INIS)

Dehghani, M.H.; Sheykhi, A.; Dehghani, R.

2013-01-01

In this Letter, we study thermodynamical properties of the apparent horizon in a universe governed by quasi-topological gravity. Our aim is twofold. First, by using the variational method we derive the general form of Friedmann equation in quasi-topological gravity. Then, by applying the first law of thermodynamics on the apparent horizon, after using the entropy expression associated with the black hole horizon in quasi-topological gravity, and replacing the horizon radius, r + , with the apparent horizon radius, r -tilde A , we derive the corresponding Friedmann equation in quasi-topological gravity. We find that these two different approaches yield the same result which shows the profound connection between the first law of thermodynamics and the gravitational field equations of quasi-topological gravity. We also study the validity of the generalized second law of thermodynamics in quasi-topological cosmology. We find that, with the assumption of the local equilibrium hypothesis, the generalized second law of thermodynamics is fulfilled for the universe enveloped by the apparent horizon for the late time cosmology

Continuous measurements of outdoor radon concentrations

International Nuclear Information System (INIS)

Iida, T.; Ikebe, Y.; Suzuki, K.; Ueno, K.; Komura, K.; Kato, I.; Jin Yihe

1993-01-01

The authors studied and developed an electrostatic 222 Rn monitor and have measured continuously outdoor radon ( 222 Rn) concentrations at Nagoya University since 1985. Four 222 Rn monitors were newly constructed to measure outdoor 222 Rn concentrations at other locations. The 222 Rn concentrations at Nagoya and Kasugai show a clear diurnal variation in autumn, and a seasonal pattern of a spring-summer minimum and a autumn-winter maximum. The results at Toki are the same pattern as that at Nagoya except spring. The concentrations at Kanazawa show a slight seasonal variation. A clear diurnal variation is observed in summer. (4 figs.)

Telecommunications Network Measurements of Online Gambling Behavior in Switzerland: A Feasibility Study.

Science.gov (United States)

Bitar, Raoul; Nordt, Carlos; Grosshans, Martin; Herdener, Marcus; Seifritz, Erich; Mutschler, Jochen

2017-01-01

Methodological shortcomings of gambling studies relying on self-report or on data sets derived from gambling operators tend to result in biased conclusions. The aim of this study was to analyze online gambling behavior using a novel network database approach. From October 13 to October 26, 2014, telecommunications network data from a major telecommunications provider in Switzerland were analyzed. Netflows between mobile devices and a poker operator were quantified to measure the gambling duration and session number. Time spent gambling during night and working hours was compared between devices with longest (red group), intermediate (orange group), and shortest gambling time (green group). Online gambling behavior differed depending on overall gambling time, F (2, 3,143). Night and working hours gambling was the highest in the red group (53%), compared to the orange (50.1%) and the green groups (41.5%). Post hoc analyses indicated significant differences between the orange and green groups (p social media use, and online pornography. © 2017 S. Karger AG, Basel.

Effectiveness of online simulation training: Measuring faculty knowledge, perceptions, and intention to adopt.

Science.gov (United States)

Kim, Sujeong; Park, Chang; O'Rourke, Jennifer

2017-04-01

Best practice standards of simulation recommend standardized simulation training for nursing faculty. Online training may offer an effective and more widely available alternative to in-person training. Using the Theory of Planned Behavior, this study evaluated the effectiveness of an online simulation training program, examining faculty's foundational knowledge of simulation as well as perceptions and intention to adopt. One-group pretest-posttest design. A large school of nursing with a main campus and five regional campuses in the Midwestern United States. Convenience sample of 52 faculty participants. Knowledge of foundational simulation principles was measured by pre/post-training module quizzes. Perceptions and the intention to adopt simulation were measured using the Faculty Attitudes and Intent to Use Related to the Human Patient Simulator questionnaire. There was a significant improvement in faculty knowledge after training and observable improvements in attitudes. Attitudes significantly influenced the intention to adopt simulation (B=2.54, p<0.001). Online simulation training provides an effective alternative for training large numbers of nursing faculty who seek to implement best practice of standards within their institutions. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum].

Science.gov (United States)

He, Ying; Zhang, Yu-Jun; Kan, Rui-Feng; Xia, Hui; Geng, Hui; Ruan, Jun; Wang, Min; Cui, Xiao-Juan; Liu, Wen-Qing

2009-01-01

With the conjunction of tunable diode laser absorption spectroscopy technology (TDLAS) and the open long optical path technology, the system designing scheme of CO2 on-line monitoring based on near infrared tunable diode laser absorption spectroscopy technology was discussed in detail, and the instrument for large-range measurement was set up. By choosing the infrared absorption line of CO2 at 1.57 microm whose line strength is strong and suitable for measurement, the ambient atmospheric CO2 was measured continuously with a 30 s temporal resolution at an suburb site in the autumn of 2007. The diurnal atmospheric variations of CO2 and continuous monitoring results were presented. The results show that the variation in CO2 concentration has an obvious diurnal periodicity in suburb where the air is free of interference and contamination. The general characteristic of diurnal variation is that the concentration is low in the daytime and high at night, so it matches the photosynthesis trend. The instrument can detect gas concentration online with high resolution, high sensitivity, high precision, short response time and many other advantages, the monitoring requires no gas sampling, the calibration is easy, and the detection limit is about 4.2 x 10(-7). It has been proved that the system and measurement project are feasible, so it is an effective method for gas flux continuous online monitoring of large range in ecosystem based on TDLAS technology.

Room temperature ferroelectricity in continuous croconic acid thin films

Energy Technology Data Exchange (ETDEWEB)

Jiang, Xuanyuan; Lu, Haidong; Yin, Yuewei; Ahmadi, Zahra; Costa, Paulo S. [Department of Physics and Astronomy, University of Nebraska, Lincoln, Nebraska 68588 (United States); Zhang, Xiaozhe [Department of Physics and Astronomy, University of Nebraska, Lincoln, Nebraska 68588 (United States); Department of Physics, Xi' an Jiaotong University, Xi' an 710049 (China); Wang, Xiao; Yu, Le; Cheng, Xuemei [Department of Physics, Bryn Mawr College, Bryn Mawr, Pennsylvania 19010 (United States); DiChiara, Anthony D. [Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439 (United States); Gruverman, Alexei, E-mail: alexei-gruverman@unl.edu, E-mail: a.enders@me.com, E-mail: xiaoshan.xu@unl.edu; Enders, Axel, E-mail: alexei-gruverman@unl.edu, E-mail: a.enders@me.com, E-mail: xiaoshan.xu@unl.edu; Xu, Xiaoshan, E-mail: alexei-gruverman@unl.edu, E-mail: a.enders@me.com, E-mail: xiaoshan.xu@unl.edu [Department of Physics and Astronomy, University of Nebraska, Lincoln, Nebraska 68588 (United States); Nebraska Center for Materials and Nanoscience, University of Nebraska, Lincoln, Nebraska 68588 (United States)

2016-09-05

Ferroelectricity at room temperature has been demonstrated in nanometer-thin quasi 2D croconic acid thin films, by the polarization hysteresis loop measurements in macroscopic capacitor geometry, along with observation and manipulation of the nanoscale domain structure by piezoresponse force microscopy. The fabrication of continuous thin films of the hydrogen-bonded croconic acid was achieved by the suppression of the thermal decomposition using low evaporation temperatures in high vacuum, combined with growth conditions far from thermal equilibrium. For nominal coverages ≥20 nm, quasi 2D and polycrystalline films, with an average grain size of 50–100 nm and 3.5 nm roughness, can be obtained. Spontaneous ferroelectric domain structures of the thin films have been observed and appear to correlate with the grain patterns. The application of this solvent-free growth protocol may be a key to the development of flexible organic ferroelectric thin films for electronic applications.

Table of members of quasi-bands

International Nuclear Information System (INIS)

Sakai, Mitsuo.

1984-04-01

The probable members of the quasi-bands in even-even nuclei for Z between 6 and 100 are listed in this table. The terms quasi-bands have been introduced in the so-called spherical regions as the counter parts of the collective bands in the deformed regions. In the present compilation, the data for deformed nuclei are classified for convenience under the same titles, Quasi-Ground Band, Quasi-Beta Band and Quasi-Gamma Band, as are used for other nuclear regions. The present edition covers the literature through September, 1983. Fifteen newly discovered nuclides are included. The classification of energy level into quasi-bands is made on the basis of the systematic trend in the data over large groups of nuclei. (Kato, T.)

Arsenolite: a quasi-hydrostatic solid pressure-transmitting medium

International Nuclear Information System (INIS)

Sans, J A; Manjón, F J; Popescu, C; Muñoz, A; Rodríguez-Hernández, P; Jordá, J L; Rey, F

2016-01-01

This study reports the experimental characterization of the hydrostatic properties of arsenolite (As 4 O 6 ), a molecular solid which is one of the softest minerals in the absence of hydrogen bonding. The high compressibility of arsenolite and its stability up to 15 GPa have been proved by x-ray diffraction measurements, and the progressive loss of hydrostaticity with increasing pressure up to 20 GPa has been monitored by ruby photoluminescence. Arsenolite has been found to exhibit hydrostatic behavior up to 2.5 GPa and a quasi-hydrostatic behavior up to 10 GPa at room temperature. This result opens the way to explore other molecular solids as possible quasi-hydrostatic pressure-transmitting media. The validity of arsenolite as an insulating, stable, non-penetrating and quasi-hydrostatic medium is explored by the study of the x-ray diffraction of zeolite ITQ-29 at high pressure. (paper)

Quasi-gas dynamic equations

CERN Document Server

Elizarova, Tatiana G

2009-01-01

This book presents two interconnected mathematical models generalizing the Navier-Stokes system. The models, called the quasi-gas-dynamic and quasi-hydrodynamic equations, are then used as the basis of numerical methods solving gas- and fluid-dynamic problems.

On-Line Enrichment Monitor for UF{sub 6} Gas Centrifuge Enrichment Plant

Energy Technology Data Exchange (ETDEWEB)

Ianakiev, K. D.; Boyer, B.; Favalli, A.; Goda, J. M.; Hill, T.; Keller, C.; Lombardi, M.; Paffett, M.; MacArthur, D. W.; McCluskey, C.; Moss, C. E.; Parker, R.; Smith, M. K.; Swinhoe, M. T. [Los Alamos National Laboratory, Los Alamos (United States)

2012-06-15

This paper is a continuation of the Advanced Enrichment Monitoring Technology for UF{sub 6} Gas Centrifuge Enrichment Plant (GCEP) work, presented in the 2010 IAEA Safeguards Symposium. Here we will present the system architecture for a planned side-by-side field trial test of passive (186-keV line spectroscopy and pressure-based correction for UF{sub 6} gas density) and active (186-keV line spectroscopy and transmission measurement based correction for UF{sub 6} gas density) enrichment monitoring systems in URENCO's enrichment plant in Capenhurst. Because the pressure and transmission measurements of UF{sub 6} are complementary, additional information on the importance of the presence of light gases and the UF{sub 6} gas temperature can be obtained by cross-correlation between simultaneous measurements of transmission, pressure and 186-keV intensity. We will discuss the calibration issues and performance in the context of accurate, on-line enrichment measurement. It is hoped that a simple and accurate on-line enrichment monitor can be built using the UF{sub 6} gas pressure provided by the Operator, based on online mass spectrometer calibration, assuming a negligible (a small fraction of percent) contribution of wall deposits. Unaccounted-for wall deposits present at the initial calibration will lead to unwanted sensitivity to changes in theUF{sub 6} gas pressure and thus to error in the enrichment results. Because the accumulated deposits in the cascade header pipe have been identified as an issue for Go/No Go measurements with the Cascade Header Enrichment Monitor (CHEM) and Continuous Enrichment Monitor (CEMO), it is important to explore their effect. Therefore we present the expected uncertainty on enrichment measurements obtained by propagating the errors introduced by deposits, gas density, etc. and will discuss the options for a deposit correction during initial calibration of an On-Line Enrichment Monitor (OLEM).

Uncountably many maximizing measures for a dense subset of continuous functions

Science.gov (United States)

Shinoda, Mao

2018-05-01

Ergodic optimization aims to single out dynamically invariant Borel probability measures which maximize the integral of a given ‘performance’ function. For a continuous self-map of a compact metric space and a dense set of continuous functions, we show the existence of uncountably many ergodic maximizing measures. We also show that, for a topologically mixing subshift of finite type and a dense set of continuous functions there exist uncountably many ergodic maximizing measures with full support and positive entropy.

The quasi-monochromatic photon beam used in photoneutron experiments from 20-120 MeV at the 600 MeV Saclay Linac

International Nuclear Information System (INIS)

Veyssiere, A.; Beil, H.; Bergere, R.; Carlos, P.; Fagot, J.; Lepretre, A.; Ahrens, J.

1979-01-01

A beam of 20-130 MeV positrons, with average intensities between 10 nA and 50 nA, is used at the 600 MeV Saclay Linac to create a quasi-monochromatic photon beam with a continuously variable energy. This beam was used to measure photoneutron cross sections and the corresponding photonuclear facility is first described. The computer-controlled methods, implemented to measure the energy spectrum and the emittance of the positron beam are described. The quasi-monochromatic photon lines are produced by the annihilation in flight of monoenergetic positrons in two annihilation radiators with different Z successively. The photon beam emission angle theta is shown to be the most critical parameter in the search for an optimum overall signal to background ratio for a specific photoneutron experiment. The choice of an angle theta approximately 4 0 is explained for absolute measurements of sigma(γ, xn) cross-sections, for which the used average intensities of monochromatic photons were thus purposely reduced to approximately 5 X 10 3 s -1 , with an energy resolution approximately 12%. (Auth.)

Equilibrium thermodynamics and neutrino decoupling in quasi-metric cosmology

Science.gov (United States)

Østvang, Dag

2018-05-01

The laws of thermodynamics in the expanding universe are formulated within the quasi-metric framework. The quasi-metric cosmic expansion does not directly influence momenta of material particles, so the expansion directly cools null particles only (e.g., photons). Therefore, said laws differ substantially from their counterparts in standard cosmology. Consequently, all non-null neutrino mass eigenstates are predicted to have the same energy today as they had just after neutrino decoupling in the early universe. This indicates that the predicted relic neutrino background is strongly inconsistent with detection rates measured in solar neutrino detectors (Borexino in particular). Thus quasi-metric cosmology is in violent conflict with experiment unless some exotic property of neutrinos makes the relic neutrino background essentially undetectable (e.g., if all massive mass eigenstates decay into "invisible" particles over cosmic time scales). But in absence of hard evidence in favour of the necessary exotic neutrino physics needed to resolve said conflict, the current status of quasi-metric relativity has been changed to non-viable.

Mobile on-line working radioaerosol-measuring systems in Baden-Wuerttemberg

International Nuclear Information System (INIS)

Aures, R.; Wenzel, H.

1998-01-01

In Baden-Wuerttemberg eight on-line measuring radioaerosol monitoring stations are successfully working since a lot of years. These monitoring stations spread over the whole country give only a rough overview of the radiological situation in the environment after an event like the Chernobyl accident. But it is expensive to increase the number of the monitoring stations in this network. This is why the 'Landesanstalt fuer Umweltschutz Baden-Wuerttemberg' (LfU) got the order from the 'Ministerium fuer Umwelt und Verkehr Baden-Wuerttemberg' to conceive a mobile on-line working radioaerosol-measuring system for environmental measurements (MORAM). The LfU had made the plans and a company built up the first prototype. In action the MORAM should send every time automatically data of radioactivity in the air and datas of meteorology from its position to the controlling center in Karlsruhe. The MORAM works by remote control, needs little servicing and is independent from main connection. In case of a nuclear event several MORAMs could be used as a local monitoring network or they could increase the number of the radioaerosol monitoring stations for a certain time. Normally, the MORAMs will be storaged and are always ready for action. All the tests with the prototype 1 are finished in the meantime and the result of the tests is a new improved prototype 2, which can be used in the emergency case. This prototype was given to the LfU. (orig.) [de

Patent Remedies: Online Management of IP Services

Directory of Open Access Journals (Sweden)

Allan Gordon

2006-06-01

Full Text Available This paper was inspired by work currently in progress under a DTI (Department of Trade and Industry funded KTP (Knowledge Transfer Partnership Project between Kennedy’s Patent and Glasgow Caledonian University. The project offers a unique opportunity to study the interplay between the firm's business exigencies, and the constantly evolving legal and procedural framework within which the firm operates. The particular focus of the paper is the issues raised by the provision of online legal/quasi-legal services in an ‘e-government’ context.

A Wigner quasi-distribution function for charged particles in classical electromagnetic fields

International Nuclear Information System (INIS)

Levanda, M.; Fleurov, V.

2001-01-01

A gauge-invariant Wigner quasi-distribution function for charged particles in classical electromagnetic fields is derived in a rigorous way. Its relation to the axial gauge is discussed, as well as the relation between the kinetic and canonical momenta in the Wigner representation. Gauge-invariant quantum analogs of Hamilton-Jacobi and Boltzmann kinetic equations are formulated for arbitrary classical electromagnetic fields in terms of the 'slashed' derivatives and momenta, introduced for this purpose. The kinetic meaning of these slashed quantities is discussed. We introduce gauge-invariant conditional moments and use them to derive a kinetic momentum continuity equation. This equation provides us with a hydrodynamic representation for quantum transport processes and a definition of the 'collision force'. The hydrodynamic equation is applied for the rotation part of the electron motion. The theory is illustrated by its application in three examples: Wigner quasi-distribution function and equations for an electron in a magnetic field and harmonic potential; Wigner quasi-distribution function for a charged particle in periodic systems using the kq representation; two Wigner quasi-distribution functions for heavy-mass polaron in an electric field

Barriers to Online Postsecondary Education Crumble: Enrollment in Traditional Face-to-Face Courses Declines as Enrollment in Online Courses Increases

Science.gov (United States)

Gray, Dahli

2013-01-01

Contrary to expectations, total postsecondary enrollment in the United States (US) declined in Fall 2011. In fact, it continues to decline while online enrollment continues to increase. Students can more easily cross geographic boundaries as online access causes barriers to postsecondary education to crumble, and more than 50% of the demand for…

Quantum trajectories and measurements in continuous time. The diffusive case

International Nuclear Information System (INIS)

Barchielli, Alberto; Gregoratti, Matteo

2009-01-01

This course-based monograph introduces the reader to the theory of continuous measurements in quantum mechanics and provides some benchmark applications. The approach chosen, quantum trajectory theory, is based on the stochastic Schroedinger and master equations, which determine the evolution of the a-posteriori state of a continuously observed quantum system and give the distribution of the measurement output. The present introduction is restricted to finite-dimensional quantum systems and diffusive outputs. Two appendices introduce the tools of probability theory and quantum measurement theory which are needed for the theoretical developments in the first part of the book. First, the basic equations of quantum trajectory theory are introduced, with all their mathematical properties, starting from the existence and uniqueness of their solutions. This makes the text also suitable for other applications of the same stochastic differential equations in different fields such as simulations of master equations or dynamical reduction theories. In the next step the equivalence between the stochastic approach and the theory of continuous measurements is demonstrated. To conclude the theoretical exposition, the properties of the output of the continuous measurement are analyzed in detail. This is a stochastic process with its own distribution, and the reader will learn how to compute physical quantities such as its moments and its spectrum. In particular this last concept is introduced with clear and explicit reference to the measurement process. The two-level atom is used as the basic prototype to illustrate the theory in a concrete application. Quantum phenomena appearing in the spectrum of the fluorescence light, such as Mollow's triplet structure, squeezing of the fluorescence light, and the linewidth narrowing, are presented. Last but not least, the theory of quantum continuous measurements is the natural starting point to develop a feedback control theory in

Exploring the Role of Syntactic Information on User Behavior in Online Social Platforms

DEFF Research Database (Denmark)

Sjöklint, Mimmi

2013-01-01

of this information is available through numbers and numbers as self-representative visualisations such as likes, views, shares, endorsements and diggs, which sparked an interest in its role in influencing users. This study thus explores the role of syntactic information on user behaviour in online social platforms......The proliferation of information technologies, applications and online services has changed the way users access information. In particular, an increasing amount of users engage with online social platforms on a daily basis where they are exposed to a continuous stream of information. A great deal...... information. Nevertheless, it became clear that public syntactic information was still unconsciously processed and applied as a measure or benchmark on the online social content....

Comprehensive Evaluation and Analysis of China's Mainstream Online Map Service Websites

Science.gov (United States)

Zhang, H.; Jiang, J.; Huang, W.; Wang, Q.; Gu, X.

2012-08-01

With the flourish development of China's Internet market, all kinds of users for map service demand is rising continually, within it contains tremendous commercial interests. Many internet giants have got involved in the field of online map service, and defined it as an important strategic product of the company. The main purpose of this research is to evaluate these online map service websites comprehensively with a model, and analyse the problems according to the evaluation results. Then some corresponding solving measures are proposed, which provides a theoretical and application guidance for the future development of fiercely competitive online map websites. The research consists of three stages: (a) the mainstream online map service websites in China are introduced and the present situation of them is analysed through visit, investigation, consultant, analysis and research. (b) a whole comprehensive evaluation quota system of online map service websites from the view of functions, layout, interaction design color position and so on, combining with the data indexes such as time efficiency, accuracy, objectivity and authority. (c) a comprehensive evaluation to these online map service websites is proceeded based on the fuzzy evaluation mathematical model, and the difficulty that measure the map websites quantitatively is solved.

Adjunct Faculty: Perception of Leadership Styles, Leadership Outcomes, and Organizational Commitment in Online and Faith-Based Education Settings

Science.gov (United States)

Pope Zinsser, Kam Lara

2017-01-01

Research indicates that adjunct faculty continues to grow in the higher education setting. Overall, universities continue to hire adjunct faculty to facilitate online courses and as a cost saving measure. While institutions continue to rely on adjunct faculty, a disconnection exists between the adjunct and the higher education administrators. This…

Error Free Quantum Reading by Quasi Bell State of Entangled Coherent States

Science.gov (United States)

Hirota, Osamu

2017-12-01

Nonclassical states of light field have been exploited to provide marvellous results in quantum information science. Usefulness of nonclassical states in quantum information science depends on whether a physical parameter as a signal is continuous or discrete. Here we present an investigation of the potential of quasi Bell states of entangled coherent states in quantum reading of the classical digital memory which was pioneered by Pirandola (Phys.Rev.Lett.,106,090504,2011). This is a typical example of discrimination for discrete quantum parameters. We show that the quasi Bell state gives the error free performance in the quantum reading that cannot be obtained by any classical state.

Conceptual Design of an Online Estimation System for Stigmergic Collaboration and Nodal Intelligence on Distributed DC Systems

Directory of Open Access Journals (Sweden)

DOORSAMY, W.

2017-05-01

Full Text Available The secondary level control of stand-alone distributed energy systems requires accurate online state information for effective coordination of its components. State estimation is possible through several techniques depending on the system's architecture and control philosophy. A conceptual design of an online state estimation system to provide nodal autonomy on DC systems is presented. The proposed estimation system uses local measurements - at each node - to obtain an aggregation of the system's state required for nodal self-control without the need for external communication with other nodes or a central controller. The recursive least-squares technique is used in conjunction with stigmergic collaboration to implement the state estimation system. Numerical results are obtained using a Matlab/Simulink model and experimentally validated in a laboratory setting. Results indicate that the proposed system provides accurate estimation and fast updating during both quasi-static and transient states.

M-quasi-hyponormal composition operators

Directory of Open Access Journals (Sweden)

Pushpa R. Suri

1987-01-01

Full Text Available A necessary and sufficient condition is obtained for M-quasi-hyponormal composition operators. It has also been proved that the class of M-quasi-hyponormal composition operators coincides with the class of M-paranormal composition operators. Existence of M-hyponormal composition operators which are not hyponormal; and M-quasihyponormal composition operators which are not M-hyponormal and quasi-hyponormal are also shown.

Fusion barrier distributions from capture and quasi-elastic excitation functions measured in reaction 36S, 48Ca, 64Ni+238U

International Nuclear Information System (INIS)

Kozulin, E. M.

2009-01-01

The subbarrier fusion enhancement in reactions with heavy ions were explained by taking into account coupling between relative motion and intrinsic degrees of freedom of interacting nuclei. The coupling of reaction channels manifests itself in the potential barrier between interacting nuclei giving rise to a distribution of fusion barrier instead of single barrier.Capture and quasi-elastic scattering excitation functions at backward angles were measured for 3 6S , 4 8C a, 6 4N i+2 38U reactions systems at energies close and below the Coulomb barrier (i.e. when the influence of the shell effects on the fusion and characteristics of the decay of the composite system is considerable). Representations of the barrier distributions were extracted from both capture and quasi-elastic data. The experimental representations of barrier distributions were compared with coupled-channel calculations using CCFULL code. The major part of these experiments has been performed at the U-400 accelerator of the Flerov Laboratory of Nuclear Reactions (JINR, Dubna); at the TANDEM-ALPI accelerator of the LNL (INFN, Legnaro, Italy) and at the Accelerator Laboratory of University of Jyvaeskylae (JYFL, Finland) using a time-of-flight spectrometer of fission fragments CORSET (CORrelation SET-up.) The extraction of the masses and Total Kinetic Energy (TKE) of the binary reaction products is based upon the analysis of the two-body velocity In the case of the fusion-fission and quasi-fission processes, the observed peculiarities of mass and energy distributions of the fragments, the ratio between the fusion-fission and quasi-fission cross sections are determined deformations of interaction nuclei and angular momentum carried in the di-nuclear system and the shell structure of the formed fragments. In this work, the high-precision capture and quasi-elastic scattering excitation function data are presented.The influence of projectile and target excitations and nucleon transfer on fusion barrier

The effects of synchronous class sessions on students' academic achievement and levels of satisfaction in an online introduction to computers course

Science.gov (United States)

LeShea, Andrea Valene

The purpose of this quasi-experimental static-group comparison study was to test the theory of transactional distance that relates the inclusion of synchronous class sessions into an online introductory computer course to students' levels of satisfaction and academic achievement at a post-secondary technical college. This study specifically looked at the effects of adding live, synchronous class sessions into an online learning environment using collaboration software such as Blackboard Collaborate and the impact that this form of live interaction had on students' overall levels of satisfaction and academic achievement with the course. A quasi-experiment using the post-test only, static-group comparison design was utilized and conducted in an introductory computer class at a local technical college. It was determined that incorporating live, synchronous class sessions into an online course did not increase students' levels of achievement, nor did it result in improved test scores. Additionally, the study revealed that there was no significant difference in students' levels of satisfaction between those taking online courses using live, synchronous methods and those experiencing traditional online methods. In light of this evidence, further research needs to be conducted to determine if students prefer a completely asynchronous online learning experience or if, when, and how they would prefer a blended approach that offers synchronous sessions as well.

Understanding Disabilities & Online Student Success

Science.gov (United States)

Betts, Kristen; Welsh, Bill; Pruitt, Cheryl; Hermann, Kelly; Dietrich, Gaeir; Trevino, Jorge G.; Watson, Terry L.; Brooks, Michael L.; Cohen, Alex H.; Coombs, Norman

2013-01-01

Online learning has been growing at an exponential rate over the past decade, providing new opportunities for students seeking quality courses and programs offered through flexible formats. However, as higher education continues to expand online offerings, services must be expanded simultaneously to support all students. This article focuses on…

Use of online sources of information by dental practitioners

DEFF Research Database (Denmark)

Funkhouser, Ellen; Agee, Bonita S; Gordan, Valeria V

2014-01-01

journals online, obtained continuing education (CDE) through online sources, rated an online source as most influential, and reported frequently using an online source for guidance. Demographics, journals read, and use of various sources of information for practice guidance in terms of frequency...

Measurement of the tensile forces during bone lengthening.

Science.gov (United States)

Ohnishi, Isao; Kurokawa, Takahide; Sato, Wakyo; Nakamura, Kozo

2005-05-01

The purpose of this study was to investigate the effects of lengthening frequency on mechanical environment in limb lengthening. Tensile forces were continuously monitored using a load sensor attached to a unilateral external fixator. Twenty patients were monitored. Ten patients were with acquired femoral shortening, and five of them underwent quasi-continuous lengthening of 1440 steps per day, and the other five received step lengthening twice a day. The other 10 patients were with achondropalsia. Five of them underwent the same quasi-continuous lengthening, and the other five received the same step lengthening. The circadian change and the daily course of the tensile forces were assessed and compared between quasi-continuous lengthening and step lengthening. As for circadian change, an acute increase in the force took place simultaneously with each step of lengthening in the step-lengthening group, but very little change of the baseline force level was seen during quasi-continuous lengthening. As for daily course of the tensile force, it increased almost linearly in both lengthening frequency groups in the initial stage of lengthening. No significant difference of the average force increment rate in this phase was recognized between the quasi-continuous and step lengthening groups irrespective of the etiologies. The lengthening frequency greatly affected the circadian change of the tensile force, but did not affect the increment rate of the force in the linear phase.

On-line measurement of microwave power in ECR ion source

International Nuclear Information System (INIS)

Zhou Changgeng; Kang Wu; Hu Yonghong; Li Yan; Lou Benchao; Zu Xiulan; Xiong Riheng; Chen Junguang; Li Xiaoyun

2005-01-01

It is a new technology to apply an ECR ion source to the neutron generator. Because of the structure limitation, working state of the ECR ion source could not be judged by the color of gas discharging in discharge chamber. Therefore, it was hard to estimate if the ECR ion source was working properly in the neutron generator. The method to resolve the problem was described in this paper. The microwave power was measured on-line by a directional coupler and a small microwave power meter. The ion beam current could be educed from the measured incidence microwave power, and discharge state in discharge chamber could be determined. (authors)

Adapting online learning for Canada's Northern public health workforce

Directory of Open Access Journals (Sweden)

Marnie Bell

2013-08-01

Full Text Available Background . Canada's North is a diverse, sparsely populated land, where inequalities and public health issues are evident, particularly for Aboriginal people. The Northern public health workforce is a unique mix of professional and paraprofessional workers. Few have formal public health education. From 2009 to 2012, the Public Health Agency of Canada (PHAC collaborated with a Northern Advisory Group to develop and implement a strategy to strengthen public health capacity in Canada's 3 northern territories. Access to relevant, effective continuing education was identified as a key issue. Challenges include diverse educational and cultural backgrounds of public health workers, geographical isolation and variable technological infrastructure across the north. Methods . PHAC's Skills Online program offers Internet-based continuing education modules for public health professionals. In partnership with the Northern Advisory Group, PHAC conducted 3 pilots between 2008 and 2012 to assess the appropriateness of the Skills Online program for Northern/Aboriginal public health workers. Module content and delivery modalities were adapted for the pilots. Adaptations included adding Inuit and Northern public health examples and using video and teleconference discussions to augment the online self-study component. Results . Findings from the pilots were informative and similar to those from previous Skills Online pilots with learners in developing countries. Online learning is effective in bridging the geographical barriers in remote locations. Incorporating content on Northern and Aboriginal health issues facilitates engagement in learning. Employer support facilitates the recruitment and retention of learners in an online program. Facilitator assets included experience as a public health professional from the north, and flexibility to use modified approaches to support and measure knowledge acquisition and application, especially for First Nations, Inuit and

Adapting online learning for Canada's Northern public health workforce.

Science.gov (United States)

Bell, Marnie; MacDougall, Karen

2013-01-01

Canada's North is a diverse, sparsely populated land, where inequalities and public health issues are evident, particularly for Aboriginal people. The Northern public health workforce is a unique mix of professional and paraprofessional workers. Few have formal public health education. From 2009 to 2012, the Public Health Agency of Canada (PHAC) collaborated with a Northern Advisory Group to develop and implement a strategy to strengthen public health capacity in Canada's 3 northern territories. Access to relevant, effective continuing education was identified as a key issue. Challenges include diverse educational and cultural backgrounds of public health workers, geographical isolation and variable technological infrastructure across the north. PHAC's Skills Online program offers Internet-based continuing education modules for public health professionals. In partnership with the Northern Advisory Group, PHAC conducted 3 pilots between 2008 and 2012 to assess the appropriateness of the Skills Online program for Northern/Aboriginal public health workers. Module content and delivery modalities were adapted for the pilots. Adaptations included adding Inuit and Northern public health examples and using video and teleconference discussions to augment the online self-study component. Findings from the pilots were informative and similar to those from previous Skills Online pilots with learners in developing countries. Online learning is effective in bridging the geographical barriers in remote locations. Incorporating content on Northern and Aboriginal health issues facilitates engagement in learning. Employer support facilitates the recruitment and retention of learners in an online program. Facilitator assets included experience as a public health professional from the north, and flexibility to use modified approaches to support and measure knowledge acquisition and application, especially for First Nations, Inuit and Metis learners. Results demonstrate that

The impact of problem solving strategy with online feedback on students’ conceptual understanding

Science.gov (United States)

Pratiwi, H. Y.; Winarko, W.; Ayu, H. D.

2018-04-01

The study aimed to determine the impact of the implementation of problem solving strategy with online feedback towards the students’ concept understanding. This study used quasi experimental design with post-test only control design. The participants were all Physics Education students of Kanjuruhan University year 2015. Then, they were divided into two different groups; 30 students belong to experiment class and the remaining 30 students belong to class of control. The students’ concept understanding was measured by the concept understanding test on multiple integral lesson. The result of the concept understanding test was analyzed by prerequisite test and stated to be normal and homogenic distributed, then the hypothesis was examined by T-test. The result of the study shows that there is difference in the concept understanding between experiment class and control class. Next, the result also shows that the students’ concept understanding which was taught using problem solving strategy with online feedback was higher than those using conventional learning; with average score of 72,10 for experiment class and 52,27 for control class.

Mechanisms of ultrafast fluorescence depletion spectroscopy and applications to measure slovation dynamics of coummarin 153 in methanol

International Nuclear Information System (INIS)

Yang Songqiu; Liu Jianyong; Zhou Panwang; Chen Junsheng; Han Keli; He Guozhong

2012-01-01

Subpicosecond fluorescence depletion spectroscopy (FDS) was used to measure the solvation dynamics of coumarin 153 (C153) in methanol. The FDS mechanisms were discussed. A quasi-continuous model was used to describe the solvational relaxation of excited states. The perturbations of the probe pulse on the excited sample system, including up-conversion and stimulated emission, were sufficiently discussed. For a probe molecule used in the FDS experiment, ensuring that the up-conversion perturbation can be negligible is important. FDS was found to be a good technique for measuring the solvation dynamics of C153 in methanol. - Highlights: ► Mechanisms of subpicosecond fluorescence depletion spectroscopy. ► Quasi-continuous model was used to describe the solvational relaxation. ► The solvation dynamics of coumarin 153 in methanol has been measured.

Development of actively cooled windows for plasma observation during quasi-continuous operation of the W7-X stellarator

International Nuclear Information System (INIS)

Konig, R.; Grosser, K.; Hildebrandt, D.; Pasch, E.; Werner, T.; Klinger, T.; Ogorodnikova, O.

2005-01-01

With the stellarator W7-X a step to quasi-continuous plasma operation will be made. The cooling system of the machine is designed such that two 30 min discharges can be run per day. Right from the start of operation 10 MW of ECRH heating power will be available for quasi-continuous operation. A working group 'Plasma Facing Optical Components' has been formed which presently concentrates on the development of water cooled windows for UV/VR/IR periscopes which can withstand the expected maximum heat loads of up to 50 kW/m 2 which due to the predominantly short wavelength nature of the radiation emitted by the plasma will be absorbed within the first millimeter of any window. We will report on the detailed Finite Element (ANSYS R ) calculations of the heat and stress distribution across the windows. Calculations have been undertaken for a large number of different window materials which are required for the various spectral regions covered by the miscellaneous diagnostics, so that the most suitable material for each application can easily be identified. Also the dependence of the cooling rate on the window diameter and thickness has been studied. The calculations show that at a power load of 50 kW/m 2 cooled sapphire windows can be used for window sizes up to ∼200 mm diameter but that for many of the other materials like ZnSe, ZnS, CaF 2 , MgF 2 and quartz window sizes need to be limited to considerably smaller sizes. Detailed simulations of the local radiation power load distribution demonstrate that by careful design the load on individual optical components can be considerably reduced. A vacuum test chamber, equipped with a vacuum compatible IR heater has been build. In this chamber a low cost, easily exchangeable window design using Helicoflex gaskets on either side of a 60 mm exposed diameter quartz window have been successfully tested over 70 heat cycles up to a maximum temperature of 450 o C at power loads of 15 kW/m 2 . The design proved to be water and

On some classes of super quasi-Einstein manifolds

International Nuclear Information System (INIS)

Ozguer, Cihan

2009-01-01

Quasi-Einstein and generalized quasi-Einstein manifolds are the generalizations of Einstein manifolds. In this study, we consider a super quasi-Einstein manifold, which is another generalization of an Einstein manifold. We find the curvature characterizations of a Ricci-pseudosymmetric and a quasi-conformally flat super quasi-Einstein manifolds. We also consider the condition C ∼ .S=0 on a super quasi-Einstein manifold, where C ∼ and S denote the quasi-conformal curvature tensor and Ricci tensor of the manifold, respectively.

High sensitive quasi freestanding epitaxial graphene gas sensor on 6H-SiC

NARCIS (Netherlands)

Iezhokin, I.; Offermans, P.; Brongersma, S.H.; Giesbers, A.J.M.; Flipse, C.F.J.

2013-01-01

We have measured the electrical response to NO2, N2, NH3, and CO for epitaxial graphene and quasi freestanding epitaxial graphene on 6H-SiC substrates. Quasi freestanding epitaxial graphene shows a 6 fold increase in NO2 sensitivity compared to epitaxial graphene. Both samples show a sensitivity

Quasi-cylindrical wave contribution in experiments on extraordinary optical transmission.

Science.gov (United States)

van Beijnum, Frerik; Rétif, Chris; Smiet, Chris B; Liu, Haitao; Lalanne, Philippe; van Exter, Martin P

2012-12-20

A metal film perforated by a regular array of subwavelength holes shows unexpectedly large transmission at particular wavelengths, a phenomenon known as the extraordinary optical transmission (EOT) of metal hole arrays. EOT was first attributed to surface plasmon polaritons, stimulating a renewed interest in plasmonics and metallic surfaces with subwavelength features. Experiments soon revealed that the field diffracted at a hole or slit is not a surface plasmon polariton mode alone. Further theoretical analysis predicted that the extra contribution, from quasi-cylindrical waves, also affects EOT. Here we report the experimental demonstration of the relative importance of surface plasmon polaritons and quasi-cylindrical waves in EOT by considering hole arrays of different hole densities. From the measured transmission spectra, we determine microscopic scattering parameters which allow us to show that quasi-cylindrical waves affect EOT only for high densities, when the hole spacing is roughly one wavelength. Apart from providing a deeper understanding of EOT, the determination of microscopic scattering parameters from the measurement of macroscopic optical properties paves the way to novel design strategies.

Proton propagation through nuclei and the quasi-free reaction mechanism studied with (e,e'p) reactions

International Nuclear Information System (INIS)

Dutta, D.; Abbott, D.; Amatuni, T.A.

1997-01-01

Jefferson Lab experiment E91-013 measured the energy dependence of proton propagation in nuclei, using the quasi-free (e, e'p) reaction. The ratios of the experimental (e, e'p) cross-sections integrated over the quasi-free region to PWIA calculations are presented as a function of momentum transfer, (0.6 2 2 ) and target nucleus (C, Fe and Au). As a first step towards a longitudinal and transverse separation of the quasi-free cross-section, a super ratio of the measured to the calculated cross-sections at forward and backward angles is presented

Quasi-Dirac neutrino oscillations

Science.gov (United States)

Anamiati, Gaetana; Fonseca, Renato M.; Hirsch, Martin

2018-05-01

Dirac neutrino masses require two distinct neutral Weyl spinors per generation, with a special arrangement of masses and interactions with charged leptons. Once this arrangement is perturbed, lepton number is no longer conserved and neutrinos become Majorana particles. If these lepton number violating perturbations are small compared to the Dirac mass terms, neutrinos are quasi-Dirac particles. Alternatively, this scenario can be characterized by the existence of pairs of neutrinos with almost degenerate masses, and a lepton mixing matrix which has 12 angles and 12 phases. In this work we discuss the phenomenology of quasi-Dirac neutrino oscillations and derive limits on the relevant parameter space from various experiments. In one parameter perturbations of the Dirac limit, very stringent bounds can be derived on the mass splittings between the almost degenerate pairs of neutrinos. However, we also demonstrate that with suitable changes to the lepton mixing matrix, limits on such mass splittings are much weaker, or even completely absent. Finally, we consider the possibility that the mass splittings are too small to be measured and discuss bounds on the new, nonstandard lepton mixing angles from current experiments for this case.

EMuJoy: software for continuous measurement of perceived emotions in music.

Science.gov (United States)

Nagel, Frederik; Kopiez, Reinhard; Grewe, Oliver; Altenmüller, Eckart

2007-05-01

An adequate study of emotions in music and film should be based on the real-time measurement of self-reported data using a continuous-response method. The recording system discussed in this article reflects two important aspects of such research: First, for a better comparison of results, experimental and technical standards for continuous measurement should be taken into account, and second, the recording system should be open to the inclusion of multimodal stimuli. In light of these two considerations, our article addresses four basic principles of the continuous measurement of emotions: (1) the dimensionality of the emotion space, (2) data acquisition (e.g., the synchronization of media and the self-reported data), (3) interface construction for emotional responses, and (4) the use of multiple stimulus modalities. Researcher-developed software (EMuJoy) is presented as a freeware solution for the continuous measurement of responses to different media, along with empirical data from the self-reports of 38 subjects listening to emotional music and viewing affective pictures.

Continuous measurements of in-bore projectile velocity

International Nuclear Information System (INIS)

Asay, J.R.; Konrad, C.H.; Hall, C.A.; Shahinpoor, M.

1989-01-01

The application of velocity interferometry to the continuous measurement of in-bore projectile velocity in a small-bore three-stage railgun is described. These measurements are useful for determining projectile acceleration and for evaluating gun performance. The launcher employed in these studies consists of a two-stage light gas gun used to inject projectiles into a railgun for additional acceleration. Results obtained for projectile velocities to 7.4 km/s with the two-stage injector are reported and potential improvements for railgun applications are discussed

Continuous measurements of nitrous oxide isotopomers during incubation experiments

DEFF Research Database (Denmark)

Winther, Malte Nordmann; Balslev-Harder, David; Christensen, Søren

2016-01-01

relevant for studies of atmospheric chemistry. We present results from continuous incubation experiments with denitrifying bacteria, Pseudomonas fluorescens (producing and reducing N2O) and P. chlororaphis (only producing N2O). The continuous position dependent measurements reveal the transient pattern....... fluorescens, the calculations results in SP values of −5.7 ‰ ± 5.6 during production of N2O and 2.3 ‰ ± 3.2 during reduction of N2O. In summary, we implemented continuous measurements of N2O isotopomers during incubation of denitrifying bacteria and believe that similar experiments will lead to a better...... understanding of denitrifying bacteria and N2O turnover in soils and sediments and ultimately hands-on knowledge on the biotic mechanisms behind greenhouse gas exchange of the Globe....

Online evolution reconstruction from a single measurement record with random time intervals for quantum communication

Science.gov (United States)

Zhou, Hua; Su, Yang; Wang, Rong; Zhu, Yong; Shen, Huiping; Pu, Tao; Wu, Chuanxin; Zhao, Jiyong; Zhang, Baofu; Xu, Zhiyong

2017-10-01

Online reconstruction of a time-variant quantum state from the encoding/decoding results of quantum communication is addressed by developing a method of evolution reconstruction from a single measurement record with random time intervals. A time-variant two-dimensional state is reconstructed on the basis of recovering its expectation value functions of three nonorthogonal projectors from a random single measurement record, which is composed from the discarded qubits of the six-state protocol. The simulated results prove that our method is robust to typical metro quantum channels. Our work extends the Fourier-based method of evolution reconstruction from the version for a regular single measurement record with equal time intervals to a unified one, which can be applied to arbitrary single measurement records. The proposed protocol of evolution reconstruction runs concurrently with the one of quantum communication, which can facilitate the online quantum tomography.

Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision

International Nuclear Information System (INIS)

Xiong, Jun; Zhang, Guangjun

2013-01-01

Additive manufacturing based on gas metal arc welding is an advanced technique for depositing fully dense components with low cost. Despite this fact, techniques to achieve accurate control and automation of the process have not yet been perfectly developed. The online measurement of the deposited bead geometry is a key problem for reliable control. In this work a passive vision-sensing system, comprising two cameras and composite filtering techniques, was proposed for real-time detection of the bead height and width through deposition of thin walls. The nozzle to the top surface distance was monitored for eliminating accumulated height errors during the multi-layer deposition process. Various image processing algorithms were applied and discussed for extracting feature parameters. A calibration procedure was presented for the monitoring system. Validation experiments confirmed the effectiveness of the online measurement system for bead geometry in layered additive manufacturing. (paper)

Online Learning Self-Efficacy in Students with and without Online Learning Experience

Science.gov (United States)

Zimmerman, Whitney Alicia; Kulikowich, Jonna M.

2016-01-01

A need was identified for an instrument to measure online learning self-efficacy, which encompassed the wide variety of tasks required of successful online students. The Online Learning Self-Efficacy Scale (OLSES) was designed to include tasks required of students enrolled in paced online courses at one university. In the present study, the…

COMPREHENSIVE EVALUATION AND ANALYSIS OF CHINA’S MAINSTREAM ONLINE MAP SERVICE WEBSITES

Directory of Open Access Journals (Sweden)

H. Zhang

2012-08-01

Full Text Available With the flourish development of China's Internet market, all kinds of users for map service demand is rising continually, within it contains tremendous commercial interests. Many internet giants have got involved in the field of online map service, and defined it as an important strategic product of the company. The main purpose of this research is to evaluate these online map service websites comprehensively with a model, and analyse the problems according to the evaluation results. Then some corresponding solving measures are proposed, which provides a theoretical and application guidance for the future development of fiercely competitive online map websites. The research consists of three stages: (a the mainstream online map service websites in China are introduced and the present situation of them is analysed through visit, investigation, consultant, analysis and research. (b a whole comprehensive evaluation quota system of online map service websites from the view of functions, layout, interaction design color position and so on, combining with the data indexes such as time efficiency, accuracy, objectivity and authority. (c a comprehensive evaluation to these online map service websites is proceeded based on the fuzzy evaluation mathematical model, and the difficulty that measure the map websites quantitatively is solved.

Continuous methane measurements from a late Holocene Greenland ice core

DEFF Research Database (Denmark)

Rhodes, R.H.; Mitchell, L.E.; Brook, E.J.

2013-01-01

Ancient air trapped inside bubbles in ice cores can now be analysed for methane concentration utilising a laser spectrometer coupled to a continuous melter system. We present a new ultra-high resolution record of atmospheric methane variability over the last 1800yr obtained from continuous analysis...... of a shallow ice core from the North Greenland Eemian project (NEEM-2011-S1) during a 4-week laboratory-based measurement campaign. Our record faithfully replicates the form and amplitudes of multi-decadal oscillations previously observed in other ice cores and demonstrates the detailed depth resolution (5.3cm......), rapid acquisition time (30mday) and good long-term reproducibility (2.6%, 2s) of the continuous measurement technique.In addition, we report the detection of high frequency ice core methane signals of non-atmospheric origin. Firstly, measurements of air from the firn-ice transition region...

Conflict management in online relationships.

Science.gov (United States)

Ishii, Kumi

2010-08-01

With the diffusion of networked technology, personal relationships can be easily formed and maintained online today. Similar to a face-to-face situation, conflict is also seen in these online relationships. Early theories suggested that computer-mediated communication (CMC) tends to increase conflicts because of the lack of social-context cues, and CMC is not rich enough to manage conflict. As CMC has become part of our daily life, we often face conflict online, and thus we need to understand how people manage conflict online. This study explored how online users manage interpersonal conflict. Self-report survey data from 159 university students were analyzed to examine their conflict-management styles in association with the perceived closeness of the online relationship and a future intention toward the relationship. The results indicated that online users select cooperative management styles to handle conflict in their close relationships. In addition, online users avoid less cooperative styles when they want to continue the relationship.

On-line coupling of counter-current chromatography and macroporous resin chromatography for continuous isolation of arctiin from the fruit of Arctium lappa L.

Science.gov (United States)

Guo, Mengzhe; Liang, Junling; Wu, Shihua

2010-08-13

In this work, we have developed a novel hybrid two-dimensional counter-current chromatography and liquid chromatography (2D CCC x LC) system for the continuous purification of arctiin from crude extract of Arctium lappa. The first dimensional CCC column has been designed to fractionalize crude complex extract into pure arctiin effluent using a one-component organic/salt-containing system, and the second dimensional LC column has been packed with macroporous resin for on-line adsorption, desalination and desorption of arctiin which was effluent purified from the first CCC dimension. Thus, the crude arctiin mixture has been purified efficiently and conveniently by on-line CCC x LC in spite of the use of a salt-containing solvent system in CCC separation. As a result, high purity (more than 97%) of arctiin has been isolated by repeated injections both using the ethyl acetate-8% sodium chloride aqueous solution and butanol-1% sodium chloride aqueous solution. By contrast with the traditional CCC processes using multi-component organic/aqueous solvent systems, the present on-line CCC x LC process only used a one-component organic solvent and thus the solvent is easier to recover and regenerate. All of used solvents such as ethyl acetate, n-butanol and NaCl aqueous solution are low toxicity and environment-friendly. Moreover, the lower phase of salt-containing aqueous solution used as mobile phase, only contained minor organic solvent, which will save much organic solvent in continuous separation. In summary, our results indicated that the on-line hybrid 2D CCC x LC system using one-component organic/salt-containing aqueous solution is very promising and powerful tool for high-throughput purification of arctiin from fruits of A. lappa. 2010 Elsevier B.V. All rights reserved.

An Intervention Including an Online Game to Improve Grade 6 Students' Performance in Early Algebra

Science.gov (United States)

Kolovou, Angeliki; van den Heuvel-Panhuizen, Marja; Koller, Olaf

2013-01-01

This study investigated whether an intervention including an online game contributed to 236 Grade 6 students' performance in early algebra, that is, solving problems with covarying quantities. An exploratory quasi-experimental study was conducted with a pretest-posttest-control-group design. Students in the experimental group were asked to solve…

Online Assessment, Measurement and Evaluation Case Studies from Higher Education, K-12 and Corporate

Directory of Open Access Journals (Sweden)

Reviewed by Dr. Adnan BOYACI

2006-01-01

Full Text Available With the revolution occurred in communication technologies at the beginning of 1990’s, network technologies have emerged as the challenging parameters accelerating improvements of instructional technologies. Online classrooms and management of them appeared as a new domain which necessitates a new paradigm different from the classical ones. User and instructor friendly learning context and management systems (LCMS have brought new approaches, techniques and tools for the assessment and measurement processes. These approaches, techniques and tools embedded in LCMS have redefined not only the way teachers teach but also students learn. WebCT, Blackboard and eCollege and many others as the online instructional environments have provided new opportunities to construct a coherent instructional system which has never been used as a unique environment any before. Assessment and measurement have been redefined within this framework. The successes of assessment and measurement methodologies or system inevitably depend on conceptualization and then implementation to different educational settings.

Bridge continuous deformation measurement technology based on fiber optic gyro

Science.gov (United States)

Gan, Weibing; Hu, Wenbin; Liu, Fang; Tang, Jianguang; Li, Sheng; Yang, Yan

2016-03-01

Bridge is an important part of modern transportation systems and deformation is a key index for bridge's safety evaluation. To achieve the long span bridge curve measurement rapidly and timely and accurately locate the bridge maximum deformation, the continuous deformation measurement system (CDMS) based on inertial platform is presented and validated in this paper. Firstly, based on various bridge deformation measurement methods, the method of deformation measurement based on the fiber optic gyro (FOG) is introduced. Secondly, the basic measurement principle based on FOG is presented and the continuous curve trajectory is derived by the formula. Then the measurement accuracy is analyzed in theory and the relevant factors are presented to ensure the measurement accuracy. Finally, the deformation measurement experiments are conducted on a bridge across the Yangtze River. Experimental results show that the presented deformation measurement method is feasible, practical, and reliable; the system can accurately and quickly locate the maximum deformation and has extensive and broad application prospects.

21 CFR 1301.19 - Special requirements for online pharmacies.

Science.gov (United States)

2010-04-01

... by means of the Internet as an online pharmacy (but continue its business activity as a non-online... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Special requirements for online pharmacies. 1301... Special requirements for online pharmacies. (a) A pharmacy that has been issued a registration under...

Weak completeness of the Bourbaki quasi-uniformity

Directory of Open Access Journals (Sweden)

M.A. Sánchez Granero

2001-04-01

Full Text Available The concept of semicompleteness (weaker than half-completeness is defined for the Bourbaki quasi-uniformity of the hyperspace of a quasi-uniform space. It is proved that the Bourbaki quasi-uniformity is semicomplete in the space of nonempty sets of a quasi-uniform space (X,U if and only if each stable filter on (X,U* has a cluster point in (X,U. As a consequence the space of nonempty sets of a quasi-pseudometric space is semicomplete if and only if the space itself is half-complete. It is also given a characterization of semicompleteness of the space of nonempty U*-compact sets of a quasi-uniform space (X,U which extends the well known Zenor-Morita theorem.

Continuous Mass Measurement on Conveyor Belt

Science.gov (United States)

Tomobe, Yuki; Tasaki, Ryosuke; Yamazaki, Takanori; Ohnishi, Hideo; Kobayashi, Masaaki; Kurosu, Shigeru

The continuous mass measurement of packages on a conveyor belt will become greatly important. In the mass measurement, the sequence of products is generally random. An interesting possibility of raising throughput of the conveyor line without increasing the conveyor belt speed is offered by the use of two or three conveyor belt scales (called a multi-stage conveyor belt scale). The multi-stage conveyor belt scale can be created which will adjust the conveyor belt length to the product length. The conveyor belt scale usually has maximum capacities of less than 80kg and 140cm, and achieves measuring rates of more than 150 packages per minute and more. The output signals from the conveyor belt scale are always contaminated with noises due to vibrations of the conveyor and the product to be measured in motion. In this paper an employed digital filter is of Finite Impulse Response (FIR) type designed under the consideration on the dynamics of the conveyor system. The experimental results on the conveyor belt scale suggest that the filtering algorithms are effective enough to practical applications to some extent.

Report of study meeting on nuclear physics of quasi-elastic scattering

International Nuclear Information System (INIS)

1992-10-01

This meeting was held for three days from June 8 to 10, 1992, as one of the study meetings of Research Center for Nuclear Physics, Osaka University. The lectures were given on spin observables in quasi-elastic scattering, calculation of spin observables in 12 C, 40 Ca(p,n) reaction in quasifree scattering region, present state of quasi-elastic scattering, first results of (p,n) quasifree scattering with the new facility of the RCNP, spin-isospin response function and effect of Δ-hole configuration in finite nuclei, effective polarization of nuclei and observed amount of spin, (p,2p) measurement in the RCNP, quasi-elastic scattering in 2 H, 3 He and 4 He of polarized protons, quasifree Δ formation, 3 He(gamma, pπ ± ) reaction in Δ region, search for isobar components in 3 He by quasifree knockout studies, nonquasi-elastic process in photonuclear reaction, QF and NQF processes in gamma d→π + π - pn, coincidence scattering experiment in quasi-elastic scattering region, exclusive electron scattering of 3 He with full inclusion of final state interaction, quasi-elastic electron scattering and internucleon correlation and 13 other themes. (K.I.)

Time series analysis of continuous-wave coherent Doppler Lidar wind measurements

DEFF Research Database (Denmark)

Sjöholm, Mikael; Mikkelsen, Torben; Mann, Jakob

2008-01-01

The influence of spatial volume averaging of a focused 1.55 mu m continuous-wave coherent Doppler Lidar on observed wind turbulence measured in the atmospheric surface layer over homogeneous terrain is described and analysed. Comparison of Lidar-measured turbulent spectra with spectra simultaneou......The influence of spatial volume averaging of a focused 1.55 mu m continuous-wave coherent Doppler Lidar on observed wind turbulence measured in the atmospheric surface layer over homogeneous terrain is described and analysed. Comparison of Lidar-measured turbulent spectra with spectra...

Potential of on-line visible and near infrared spectroscopy for measurement of pH for deriving variable rate lime recommendations.

Science.gov (United States)

Tekin, Yücel; Kuang, Boyan; Mouazen, Abdul M

2013-08-08

This paper aims at exploring the potential of visible and near infrared (vis-NIR) spectroscopy for on-line measurement of soil pH, with the intention to produce variable rate lime recommendation maps. An on-line vis-NIR soil sensor set up to a frame was used in this study. Lime application maps, based on pH predicted by vis-NIR techniques, were compared with maps based on traditional lab-measured pH. The validation of the calibration model using off-line spectra provided excellent prediction accuracy of pH (R2 = 0.85, RMSEP = 0.18 and RPD = 2.52), as compared to very good accuracy obtained with the on-line measured spectra (R2 = 0.81, RMSEP = 0.20 and RPD = 2.14). On-line predicted pH of all points (e.g., 2,160) resulted in the largest overall field virtual lime requirement (1.404 t), as compared to those obtained with 16 validation points off-line prediction (0.28 t), on-line prediction (0.14 t) and laboratory reference measurement (0.48 t). The conclusion is that the vis-NIR spectroscopy can be successfully used for the prediction of soil pH and for deriving lime recommendations. The advantage of the on-line sensor over sampling with limited number of samples is that more detailed information about pH can be obtained, which is the reason for a higher but precise calculated lime recommendation rate.

Potential of On-Line Visible and Near Infrared Spectroscopy for Measurement of pH for Deriving Variable Rate Lime Recommendations

Directory of Open Access Journals (Sweden)

Yücel Tekin

2013-08-01

Full Text Available This paper aims at exploring the potential of visible and near infrared (vis-NIR spectroscopy for on-line measurement of soil pH, with the intention to produce variable rate lime recommendation maps. An on-line vis-NIR soil sensor set up to a frame was used in this study. Lime application maps, based on pH predicted by vis-NIR techniques, were compared with maps based on traditional lab-measured pH. The validation of the calibration model using off-line spectra provided excellent prediction accuracy of pH (R2 = 0.85, RMSEP = 0.18 and RPD = 2.52, as compared to very good accuracy obtained with the on-line measured spectra (R2 = 0.81, RMSEP = 0.20 and RPD = 2.14. On-line predicted pH of all points (e.g., 2,160 resulted in the largest overall field virtual lime requirement (1.404 t, as compared to those obtained with 16 validation points off-line prediction (0.28 t, on-line prediction (0.14 t and laboratory reference measurement (0.48 t. The conclusion is that the vis-NIR spectroscopy can be successfully used for the prediction of soil pH and for deriving lime recommendations. The advantage of the on-line sensor over sampling with limited number of samples is that more detailed information about pH can be obtained, which is the reason for a higher but precise calculated lime recommendation rate.

Can use of online measurements in EVOP designs reduce the time to locate production optimum?

DEFF Research Database (Denmark)

Andersen, Heidi Mai-Lis; Jørgensen, Erik; Pedersen, Lene Juul

2015-01-01

The purpose of this project is to investigate if application of online sensor measurements can improve the use of Evolutionary operation (EVOP) tools in livestock farms by reducing manual recording and by observing intermediate problem measures at an early stage. An example with reduction of tail...

Steps toward improving diet and exercise for cancer survivors (STRIDE): a quasi-randomised controlled trial protocol.

Science.gov (United States)

Frensham, Lauren J; Zarnowiecki, Dorota M; Parfitt, Gaynor; Stanley, Rebecca M; Dollman, James

2014-06-13

Cancer survivorship rates have increased in developed countries largely due to population ageing and improvements in cancer care. Survivorship is a neglected phase of cancer treatment and is often associated with adverse physical and psychological effects. There is a need for broadly accessible, non-pharmacological measures that may prolong disease-free survival, reduce or alleviate co-morbidities and enhance quality of life. The aim of the Steps TowaRd Improving Diet and Exercise (STRIDE) study is to evaluate the effectiveness of an online-delivered physical activity intervention for increasing walking in cancer survivors living in metropolitan and rural areas of South Australia. This is a quasi-randomised controlled trial. The intervention period is 12-weeks with 3-month follow-up. The trial will be conducted at a university setting and community health services in South Australia. Participants will be insufficiently active and aged 18 years or older. Participants will be randomly assigned to either the intervention or control group. All participants will receive a pedometer but only the intervention group will have access to the STRIDE website where they will report steps, affect and ratings of perceived exertion (RPE) during exercise daily. Researchers will use these variables to individualise weekly step goals to increase walking.The primary outcome measure is steps per day. The secondary outcomes are a) health measures (anthropometric and physiological), b) dietary habits (consumption of core foods and non-core foods) and c) quality of life (QOL) including physical, psychological and social wellbeing. Measures will be collected at baseline, post-intervention and 3-month follow-up. This protocol describes the implementation of a trial using an online resource to assist cancer survivors to become more physically active. It is an innovative tool that uses ratings of perceived exertion and daily affect to create individualised step goals for cancer survivors. The

Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: Microstructure and wear performance

Science.gov (United States)

Hu, Yingbin; Ning, Fuda; Wang, Hui; Cong, Weilong; Zhao, Bo

2018-02-01

Titanium (Ti) and its alloys have been successfully applied to the aeronautical and biomedical industries. However, their poor tribological properties restrict their fields of applications under severe wear conditions. Facing to these challenges, this study investigated TiB reinforced Ti matrix composites (TiB-TMCs), fabricated by in-situ laser engineered net shaping (LENS) process, through analyzing parts quality, microstructure formation mechanisms, microstructure characterizations, and workpiece wear performance. At high B content areas (original B particle locations), reaction between Ti and B particles took place, generating flower-like microstructure. At low B content areas, eutectic TiB nanofibers contacted with each other with the formation of crosslinking microstructure. The crosslinking microstructural TiB aggregated and connected at the boundaries of Ti grains, forming a three-dimensional quasi-continuous network microstructure. The results show that compared with commercially pure Ti bulk parts, the TiB-TMCs exhibited superior wear performance (i.e. indentation wear resistance and friction wear resistance) due to the present of TiB reinforcement and the innovative microstructures formed inside TiB-TMCs. In addition, the qualities of the fabricated parts were improved with fewer interior defects by optimizing laser power, thus rendering better wear performance.

Characterizing the influence of matrix ductility on damage phenomenology in continuous fiber-reinforced thermoplastic laminates undergoing quasi-static indentation

KAUST Repository

Yudhanto, Arief

2017-12-12

The use of thermoplastic matrix was known to improve the impact properties of laminated composites. However, different ductility levels can exist in a single family of thermoplastic matrix, and this may consequently modify the damage phenomenology of thermoplastic composites. This paper focuses on the effect of matrix ductility on the out-of-plane properties of thermoplastic composites, which was studied through quasi-static indentation (QSI) test that may represent impact problem albeit the speed difference. We evaluated continuous glass-fiber reinforced polypropylene thermoplastic composites (GFPP), and selected homopolymer PP and copolymer PP that represent ductile and less ductile matrices, respectively. Several cross-ply laminates were selected to study the influence of ply thicknesses and relative orientation of interfaces on QSI properties of GFPP. It is expected that GFPP with ductile matrix improves energy absorption of GFPP. However, the damage mechanism is completely different between GFPP with ductile and GFPP with less ductile matrices. GFPP with ductile matrix exhibits smaller damage zone in comparison to the one with less ductile matrix. Higher matrix ductility inhibits the growth of ply cracking along the fiber, and this causes the limited size of delamination. The stacking sequence poses more influence on less ductile composites rather than the ductile one.

Quasi-two-dimensional thermoelectricity in SnSe

Science.gov (United States)

Tayari, V.; Senkovskiy, B. V.; Rybkovskiy, D.; Ehlen, N.; Fedorov, A.; Chen, C.-Y.; Avila, J.; Asensio, M.; Perucchi, A.; di Pietro, P.; Yashina, L.; Fakih, I.; Hemsworth, N.; Petrescu, M.; Gervais, G.; Grüneis, A.; Szkopek, T.

2018-01-01

Stannous selenide is a layered semiconductor that is a polar analog of black phosphorus and of great interest as a thermoelectric material. Unusually, hole doped SnSe supports a large Seebeck coefficient at high conductivity, which has not been explained to date. Angle-resolved photoemission spectroscopy, optical reflection spectroscopy, and magnetotransport measurements reveal a multiple-valley valence-band structure and a quasi-two-dimensional dispersion, realizing a Hicks-Dresselhaus thermoelectric contributing to the high Seebeck coefficient at high carrier density. We further demonstrate that the hole accumulation layer in exfoliated SnSe transistors exhibits a field effect mobility of up to 250 cm2/V s at T =1.3 K . SnSe is thus found to be a high-quality quasi-two-dimensional semiconductor ideal for thermoelectric applications.

On-line fouling monitor for heat exchangers

International Nuclear Information System (INIS)

Tsou, J.L.

1995-01-01

Biological and/or chemical fouling in utility service water system heat exchangers adversely affects operation and maintenance costs, and reduced heat transfer capability can force a power deaerating or even a plant shut down. In addition, service water heat exchanger performance is a safety issue for nuclear power plants, and the issue was highlighted by NRC in Generic Letter 89-13. Heat transfer losses due to fouling are difficult to measure and, usually, quantitative assessment of the impact of fouling is impossible. Plant operators typically measure inlet and outlet water temperatures and flow rates and then perform complex calculations for heat exchanger fouling resistance or ''cleanliness''. These direct estimates are often imprecise due to inadequate instrumentation. Electric Power Research Institute developed and patented an on-line condenser fouling monitor. This monitor may be installed in any location within the condenser; does not interfere with routine plant operations, including on-line mechanical and chemical treatment methods; and provides continuous, real-time readings of the heat transfer efficiency of the instrumented tube. This instrument can be modified to perform on-line monitoring of service water heat exchangers. This paper discusses the design, construction of the new monitor, and algorithm used to calculate service water heat exchanger fouling

Carbon and Hydrogen Isotope Measurements of Alcohols and Organic Acids by Online Pyroprobe-GC-IRMS

Science.gov (United States)

Socki, Richard A.; Fu, Qi; Niles, Paul B.; Gibson, Everett K., Jr.

2012-01-01

The detection of methane in the atmosphere of Mars, combined with evidence showing widespread water-rock interaction during martian history, suggests that the production of methane on Mars may be the result of mineral surface-catalyzed CO2 and or CO reduction during Fisher-Tropsch Type (FTT) reactions. A better understanding of these reaction pathways and corresponding C and H isotope fractionations is critical to deciphering the synthesis of organic compounds produced under abiotic hydrothermal conditions. Described here is a technique for the extraction and analysis of both C and H isotopes from alcohols (C1-C4) and organic acids (C1-C6). This work is meant to provide a "proof of concept" for making meaningful isotope measurements on complex mixtures of solid-phase hydrocarbons and other intermediary products produced during high-temperature and high-pressure synthesis on mineral-catalyzed surfaces. These analyses are conducted entirely "on-line" utilizing a CDS model 5000 Pyroprobe connected to a Thermo Trace GC Ultra that is interfaced with a Thermo MAT 253 isotope ratio mass spectrometer operating in continuous flow mode. Also, this technique is designed to carry a split of the GC-separated product to a DSQ II quadrupole mass spectrometer as a means of making semi-quantitative compositional measurements. Therefore, both chemical and isotopic measurements can be carried out on the same sample.

Application of quasi-random numbers for simulation

International Nuclear Information System (INIS)

Kazachenko, O.N.; Takhtamyshev, G.G.

1985-01-01

Application of the Monte-Carlo method for multidimensional integration is discussed. The main goal is to check the statement that the application of quasi-random numbers instead of regular pseudo-random numbers provides more rapid convergency. The Sobol, Richtmayer and Halton algorithms of quasi-random sequences are described. Over 50 tests to compare these quasi-random numbers as well as pseudo-random numbers were fulfilled. In all cases quasi-random numbers have clearly demonstrated a more rapid convergency as compared with pseudo-random ones. Positive test results on quasi-random trend in Monte-Carlo method seem very promising

Investigating the construct validity of quality measures influencing online shopping in a South African context

Directory of Open Access Journals (Sweden)

Hung-Joubert Yu-ting

2017-09-01

Full Text Available Online shopping has become popular over the years and is a widely used way to purchase goods and services. For online retailers to succeed, it is important that they have a quality website to attract and retain customers. The aim of this study was to investigate the construct validity of three respective measurement instruments related to website quality factors, namely; system, information and service quality factors, which may influence consumers within the online shopping environment in a South African context. Primary data was collected through self-administered questionnaires. The demographic and online shopping profile of the sample are presented and followed by confirmatory and exploratory factors analyses on the three instruments. The confirmatory factor analysis found poor fit for the original hypothesised models for each of the scales; further exploratory factor analyses revealed slightly different dimensionalities underlying the scales, yet these were still somewhat aligned with the theoretical framework from which the original scales were derived. Despite this, the study provides a platform for future revision of the scales and future research into website quality factors within the online shopping environment in a South African context.

Exclusive measurements of quasi-free proton scattering reactions in inverse and complete kinematics

Directory of Open Access Journals (Sweden)

V. Panin

2016-02-01

Full Text Available Quasi-free scattering reactions of the type (p,2p were measured for the first time exclusively in complete and inverse kinematics, using a 12C beam at an energy of ∼400 MeV/u as a benchmark. This new technique has been developed to study the single-particle structure of exotic nuclei in experiments with radioactive-ion beams. The outgoing pair of protons and the fragments were measured simultaneously, enabling an unambiguous identification of the reaction channels and a redundant measurement of the kinematic observables. Both valence and deeply-bound nucleon orbits are probed, including those leading to unbound states of the daughter nucleus. Exclusive (p,2p cross sections of 15.8(18 mb, 1.9(2 mb and 1.5(2 mb to the low-lying 0p-hole states overlapping with the ground state (3/2− and with the bound excited states of 11B at 2.125 MeV (1/2− and 5.02 MeV (3/2−, respectively, were determined via γ-ray spectroscopy. Particle-unstable deep-hole states, corresponding to proton removal from the 0s-orbital, were studied via the invariant-mass technique. Cross sections and momentum distributions were extracted and compared to theoretical calculations employing the eikonal formalism. The obtained results are in a good agreement with this theory and with direct-kinematics experiments. The dependence of the proton–proton scattering kinematics on the internal momentum of the struck proton and on its separation energy was investigated for the first time in inverse kinematics employing a large-acceptance measurement.

The effect of an online video intervention 'Movie Models' on specific parenting practices and parental self-efficacy related to children's physical activity, screen-time and healthy diet: a quasi experimental study.

Science.gov (United States)

De Lepeleere, Sara; De Bourdeaudhuij, Ilse; Cardon, Greet; Verloigne, Maïté

2017-04-27

In children, being sufficiently physically active, having low levels of screen-time and having a healthy diet are largely influenced by parenting practices. Children of parents applying positive parenting practices are at lower risk for overweight and obesity. Therefore, we investigated the effect of a health promoting online video intervention for parents ('Movie Models') on children's physical activity (PA), screen-time and healthy diet, and on specific parenting practices and parental self-efficacy related to these parenting practices. The online videos are delivered to parents of primary schoolchildren, and were based on real-life scenarios. A two-armed, quasi experimental design was used. Parents of primary schoolchildren were recruited between November and December 2013 by spreading an appeal in social media, and by contacting primary schools. Participating parents were predominantly of high socio-economic status (SES) (83.1%), and only 6.8% of children were overweight/obese. Intervention group participants were invited to watch online videos for 4 weeks. Specific parenting practices, parental self-efficacy, PA, screen-time and healthy diet of the child were assessed at baseline (T0), at one (T1) and at four (T2) months post baseline. Repeated Measures (Multivariate) ANOVAs were used to examine intervention effects. The potential moderating effect of age and gender of the child and parental SES was also examined. Between T0 and T2, no significant intervention effects were found on children's PA, screen-time or healthy diet. Most significant intervention effects were found for more complex parenting practices (e.g., an increase in motivating the child to eat fruit). Subgroup analyses showed that the intervention had more effect on the actual parenting practices related to PA, screen-time and healthy diet in parents of older children (10-12 years old), whereas intervention effects on parental self-efficacy related to those behaviors were stronger in parents of

Development of measures of online privacy concern and protection for use on the Internet

OpenAIRE

Buchanan, T; Paine, C; Joinson, A; Reips, U D

2007-01-01

As the Internet grows in importance, concerns about online privacy have arisen. We describe the development and validation of three short Internet-administered scales measuring privacy related attitudes ('Privacy Concern') and behaviors ('General Caution' and 'Technical Protection').

Spatial and temporal variation of sources contributing to quasi-ultrafine particulate matter PM0.36 in Augsburg, Germany.

Science.gov (United States)

Li, Fengxia; Schnelle-Kreis, Jürgen; Cyrys, Josef; Wolf, Kathrin; Karg, Erwin; Gu, Jianwei; Orasche, Jürgen; Abbaszade, Gülcin; Peters, Annette; Zimmermann, Ralf

2018-08-01

to study the sources contributing to quasi-ultrafine particle (UFP) organic carbon and the spatial temporal variability of the sources. 24h quasi-UFP (particulate matter quasi-UFP vary among sites and source types and show source-specific characteristics. Therefore, caution should be taken when using one monitor site measurement to assess human exposure in health effect studies of quasi-UFP. Copyright © 2018 Elsevier B.V. All rights reserved.

Continuous greenhouse gas measurements from ice cores

DEFF Research Database (Denmark)

Stowasser, Christopher

Ice cores offer the unique possibility to study the history of past atmospheric greenhouse gases over the last 800,000 years, since past atmospheric air is trapped in bubbles in the ice. Since the 1950s, paleo-scientists have developed a variety of techniques to extract the trapped air from...... individual ice core samples, and to measure the mixing ratio of greenhouse gases such as carbon dioxide, methane and nitrous oxide in the extracted air. The discrete measurements have become highly accurate and reproducible, but require relatively large amounts of ice per measured species and are both time......-consuming and labor-intensive. This PhD thesis presents the development of a new method for measurements of greenhouse gas mixing ratios from ice cores based on a melting device of a continuous flow analysis (CFA) system. The coupling to a CFA melting device enables time-efficient measurements of high resolution...

Quantum dissipative systems from theory of continuous measurements

International Nuclear Information System (INIS)

Mensky, Michael B.; Stenholm, Stig

2003-01-01

We apply the restricted-path-integral (RPI) theory of non-minimally disturbing continuous measurements for correct description of frictional Brownian motion. The resulting master equation is automatically of the Lindblad form, so that the difficulties typical of other approaches do not exist. In the special case of harmonic oscillator the known familiar master equation describing its frictionally driven Brownian motion is obtained. A thermal reservoir as a measuring environment is considered

Quasi-steady centrifuge method for unsaturated hydraulic properties

Science.gov (United States)

Caputo, Maria C.; Nimmo, John R.

2005-11-01

We have developed the quasi-steady centrifuge (QSC) method as a variation of the steady state centrifuge method that can be implemented simply and inexpensively with greater versatility in terms of sample size and other features. It achieves these advantages by somewhat relaxing the criterion for steadiness of flow through the sample. This compromise entails an increase in measurement uncertainty but to a degree that is tolerable in most applications. We have tested this new approach with an easily constructed apparatus to establish a quasi-steady flow of water in unsaturated porous rock samples spinning in a centrifuge, obtaining measurements of unsaturated hydraulic conductivity and water retention that agree with results of other methods. The QSC method is adaptable to essentially any centrifuge suitable for hydrogeologic applications, over a wide range of sizes and operating speeds. The simplified apparatus and greater adaptability of this method expands the potential for exploring situations that are common in nature but have been the subject of few laboratory investigations.

Fully Numerical Methods for Continuing Families of Quasi-Periodic Invariant Tori in Astrodynamics

Science.gov (United States)

Baresi, Nicola; Olikara, Zubin P.; Scheeres, Daniel J.

2018-01-01

Quasi-periodic invariant tori are of great interest in astrodynamics because of their capability to further expand the design space of satellite missions. However, there is no general consent on what is the best methodology for computing these dynamical structures. This paper compares the performance of four different approaches available in the literature. The first two methods compute invariant tori of flows by solving a system of partial differential equations via either central differences or Fourier techniques. In contrast, the other two strategies calculate invariant curves of maps via shooting algorithms: one using surfaces of section, and one using a stroboscopic map. All of the numerical procedures are tested in the co-rotating frame of the Earth as well as in the planar circular restricted three-body problem. The results of our numerical simulations show which of the reviewed procedures should be preferred for future studies of astrodynamics systems.

A simple method using on-line continuous leaching and ion exchange chromatography coupled to inductively coupled plasma mass spectrometry for the speciation analysis of bio-accessible arsenic in rice.

Science.gov (United States)

Horner, Nolan S; Beauchemin, Diane

2012-03-02

A simple method for the speciation analysis of bio-accessible arsenic (As) in rice was developed using a continuous on-line leaching method to release the bio-accessible fraction. The continuous on-line leaching method has several advantages over commonly used batch methods including quicker and easier sample preparation, reduced risk of contamination and access to real time leaching data. The bio-accessibility of As in the samples was monitored using inductively coupled plasma mass spectrometry (ICP-MS). Results from a certified reference material as well as cooked and uncooked white rice showed that the majority of As was leached by saliva. Results obtained using the continuous on-line leaching method were comparable to those obtained using a batch method. Speciation analysis of the saliva leachate was performed using ion exchange chromatography coupled to ICP-MS. The four most toxic forms of As (As(III), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA) and As(V)) were clearly separated within 5 min in a single chromatographic run. Over 92% of bio-accessible As in the certified reference material and uncooked white rice sample was in the form of DMA and As(V), whereas it was present as DMA and As(III) in the cooked white rice. Copyright © 2011 Elsevier B.V. All rights reserved.

Web 3.0: Implications for Online Learning

Science.gov (United States)

Morris, Robin D.

2010-01-01

The impact of Web 3.0, also known as the Semantic Web, on online learning is yet to be determined as the Semantic Web and its technologies continue to develop. Online instructors must have a rudimentary understanding of Web 3.0 to prepare for the next phase of online learning. This paper provides an understandable definition of the Semantic Web…

Violation of Bell's Inequality Using Continuous Variable Measurements

Science.gov (United States)

Thearle, Oliver; Janousek, Jiri; Armstrong, Seiji; Hosseini, Sara; Schünemann Mraz, Melanie; Assad, Syed; Symul, Thomas; James, Matthew R.; Huntington, Elanor; Ralph, Timothy C.; Lam, Ping Koy

2018-01-01

A Bell inequality is a fundamental test to rule out local hidden variable model descriptions of correlations between two physically separated systems. There have been a number of experiments in which a Bell inequality has been violated using discrete-variable systems. We demonstrate a violation of Bell's inequality using continuous variable quadrature measurements. By creating a four-mode entangled state with homodyne detection, we recorded a clear violation with a Bell value of B =2.31 ±0.02 . This opens new possibilities for using continuous variable states for device independent quantum protocols.

Online physician ratings fail to predict actual performance on measures of quality, value, and peer review.

Science.gov (United States)

Daskivich, Timothy J; Houman, Justin; Fuller, Garth; Black, Jeanne T; Kim, Hyung L; Spiegel, Brennan

2018-04-01

Patients use online consumer ratings to identify high-performing physicians, but it is unclear if ratings are valid measures of clinical performance. We sought to determine whether online ratings of specialist physicians from 5 platforms predict quality of care, value of care, and peer-assessed physician performance. We conducted an observational study of 78 physicians representing 8 medical and surgical specialties. We assessed the association of consumer ratings with specialty-specific performance scores (metrics including adherence to Choosing Wisely measures, 30-day readmissions, length of stay, and adjusted cost of care), primary care physician peer-review scores, and administrator peer-review scores. Across ratings platforms, multivariable models showed no significant association between mean consumer ratings and specialty-specific performance scores (β-coefficient range, -0.04, 0.04), primary care physician scores (β-coefficient range, -0.01, 0.3), and administrator scores (β-coefficient range, -0.2, 0.1). There was no association between ratings and score subdomains addressing quality or value-based care. Among physicians in the lowest quartile of specialty-specific performance scores, only 5%-32% had consumer ratings in the lowest quartile across platforms. Ratings were consistent across platforms; a physician's score on one platform significantly predicted his/her score on another in 5 of 10 comparisons. Online ratings of specialist physicians do not predict objective measures of quality of care or peer assessment of clinical performance. Scores are consistent across platforms, suggesting that they jointly measure a latent construct that is unrelated to performance. Online consumer ratings should not be used in isolation to select physicians, given their poor association with clinical performance.

Fast integration using quasi-random numbers

International Nuclear Information System (INIS)

Bossert, J.; Feindt, M.; Kerzel, U.

2006-01-01

Quasi-random numbers are specially constructed series of numbers optimised to evenly sample a given s-dimensional volume. Using quasi-random numbers in numerical integration converges faster with a higher accuracy compared to the case of pseudo-random numbers. The basic properties of quasi-random numbers are introduced, various generators are discussed and the achieved gain is illustrated by examples

Fast integration using quasi-random numbers

Science.gov (United States)

Bossert, J.; Feindt, M.; Kerzel, U.

2006-04-01

Quasi-random numbers are specially constructed series of numbers optimised to evenly sample a given s-dimensional volume. Using quasi-random numbers in numerical integration converges faster with a higher accuracy compared to the case of pseudo-random numbers. The basic properties of quasi-random numbers are introduced, various generators are discussed and the achieved gain is illustrated by examples.

First measurement of $Z/\\gamma^{*}$ production in Compton scattering of quasi-real photons

CERN Document Server

Abbiendi, G.; Alexander, G.; Allison, John; Altekamp, N.; Anderson, K.J.; Anderson, S.; Arcelli, S.; Asai, S.; Ashby, S.F.; Axen, D.; Azuelos, G.; Ball, A.H.; Barberio, E.; Barlow, Roger J.; Bartoldus, R.; Batley, J.R.; Baumann, S.; Bechtluft, J.; Behnke, T.; Bell, Kenneth Watson; Bella, G.; Bellerive, A.; Bentvelsen, S.; Bethke, S.; Betts, S.; Biebel, O.; Biguzzi, A.; Bird, S.D.; Blobel, V.; Bloodworth, I.J.; Bobinski, M.; Bock, P.; Bohme, J.; Bonacorsi, D.; Boutemeur, M.; Braibant, S.; Bright-Thomas, P.; Brigliadori, L.; Brown, Robert M.; Burckhart, H.J.; Burgard, C.; Burgin, R.; Capiluppi, P.; Carnegie, R.K.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Chrisman, D.; Ciocca, C.; Clarke, P.E.L.; Clay, E.; Cohen, I.; Conboy, J.E.; Cooke, O.C.; Couyoumtzelis, C.; Coxe, R.L.; Cuffiani, M.; Dado, S.; Dallavalle, G.Marco; Davis, R.; De Jong, S.; del Pozo, L.A.; De Roeck, A.; Desch, K.; Dienes, B.; Dixit, M.S.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Eatough, D.; Estabrooks, P.G.; Etzion, E.; Evans, H.G.; Fabbri, F.; Fanti, M.; Faust, A.A.; Fiedler, F.; Fierro, M.; Fleck, I.; Folman, R.; Furtjes, A.; Futyan, D.I.; Gagnon, P.; Gary, J.W.; Gascon, J.; Gascon-Shotkin, S.M.; Gaycken, G.; Geich-Gimbel, C.; Giacomelli, G.; Giacomelli, P.; Gibson, V.; Gibson, W.R.; Gingrich, D.M.; Glenzinski, D.; Goldberg, J.; Gorn, W.; Grandi, C.; Gross, E.; Grunhaus, J.; Gruwe, M.; Hanson, G.G.; Hansroul, M.; Hapke, M.; Harder, K.; Hargrove, C.K.; Hartmann, C.; Hauschild, M.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Herndon, M.; Herten, G.; Heuer, R.D.; Hildreth, M.D.; Hill, J.C.; Hillier, S.J.; Hobson, P.R.; Hocker, James Andrew; Homer, R.J.; Honma, A.K.; Horvath, D.; Hossain, K.R.; Howard, R.; Huntemeyer, P.; Igo-Kemenes, P.; Imrie, D.C.; Ishii, K.; Jacob, F.R.; Jawahery, A.; Jeremie, H.; Jimack, M.; Jones, C.R.; Jovanovic, P.; Junk, T.R.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Kayal, P.I.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Koetke, D.S.; Kokott, T.P.; Kolrep, M.; Komamiya, S.; Kowalewski, Robert V.; Kress, T.; Krieger, P.; von Krogh, J.; Kuhl, T.; Kyberd, P.; Lafferty, G.D.; Lanske, D.; Lauber, J.; Lautenschlager, S.R.; Lawson, I.; Layter, J.G.; Lazic, D.; Lee, A.M.; Lellouch, D.; Letts, J.; Levinson, L.; Liebisch, R.; List, B.; Littlewood, C.; Lloyd, A.W.; Lloyd, S.L.; Loebinger, F.K.; Long, G.D.; Losty, M.J.; Ludwig, J.; Lui, D.; Macchiolo, A.; Macpherson, A.; Mader, W.; Mannelli, M.; Marcellini, S.; Markopoulos, C.; Martin, A.J.; Martin, J.P.; Martinez, G.; Mashimo, T.; Mattig, Peter; McDonald, W.John; McKenna, J.; Mckigney, E.A.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Menke, S.; Merritt, F.S.; Mes, H.; Meyer, J.; Michelini, A.; Mihara, S.; Mikenberg, G.; Miller, D.J.; Mir, R.; Mohr, W.; Montanari, A.; Mori, T.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nellen, B.; Nisius, R.; O'Neale, S.W.; Oakham, F.G.; Odorici, F.; Ogren, H.O.; Oreglia, M.J.; Orito, S.; Palinkas, J.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Patt, J.; Perez-Ochoa, R.; Petzold, S.; Pfeifenschneider, P.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poffenberger, P.; Polok, J.; Przybycien, M.; Rembser, C.; Rick, H.; Robertson, S.; Robins, S.A.; Rodning, N.; Roney, J.M.; Roscoe, K.; Rossi, A.M.; Rozen, Y.; Runge, K.; Runolfsson, O.; Rust, D.R.; Sachs, K.; Saeki, T.; Sahr, O.; Sang, W.M.; Sarkisian, E.K.G.; Sbarra, C.; Schaile, A.D.; Schaile, O.; Scharf, F.; Scharff-Hansen, P.; Schieck, J.; Schmitt, B.; Schmitt, S.; Schoning, A.; Schroder, Matthias; Schumacher, M.; Schwick, C.; Scott, W.G.; Seiler, T.; Seuster, R.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.P.; Sittler, A.; Skuja, A.; Smith, A.M.; Snow, G.A.; Sobie, R.; Soldner-Rembold, S.; Sproston, M.; Stahl, A.; Stephens, K.; Steuerer, J.; Stoll, K.; Strom, David M.; Strohmer, R.; Surrow, B.; Talbot, S.D.; Tanaka, S.; Taras, P.; Tarem, S.; Teuscher, R.; Thiergen, M.; Thomson, M.A.; von Torne, E.; Torrence, E.; Towers, S.; Trigger, I.; Trocsanyi, Z.; Tsur, E.; Turcot, A.S.; Turner-Watson, M.F.; Van Kooten, Rick J.; Vannerem, P.; Verzocchi, M.; Voss, H.; Wackerle, F.; Wagner, A.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wermes, N.; White, J.S.; Wilson, G.W.; Wilson, J.A.; Wyatt, T.R.; Yamashita, S.; Yekutieli, G.; Zacek, V.; Zer-Zion, D.

1998-01-01

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.

Supporting wellness in adult online education

Directory of Open Access Journals (Sweden)

Jacklyn J. Thompson

2014-02-01

Full Text Available Online education cannot continue to grow at the current pace while ignoring a crucial component of campus support, wellness for adult online learners. This paper brings awareness to the concept of wellness as an important student support service in adult online education. It includes a summarized review of relevant literature and identifies specific wellness concerns of adult online learners. The paper also provides examples of how three American higher education institutions are addressing the issue of wellness promotion in online learning. It identifies areas for improvement in current wellness initiatives and offers recommended strategies for supporting adult online learner wellness to professional organizations, institutions, instructors, and distance learners.http://dx.doi.org/10.5944/openpraxis.6.1.100

Measures of Quantum Synchronization in Continuous Variable Systems

Science.gov (United States)

Mari, A.; Farace, A.; Didier, N.; Giovannetti, V.; Fazio, R.

2013-09-01

We introduce and characterize two different measures which quantify the level of synchronization of coupled continuous variable quantum systems. The two measures allow us to extend to the quantum domain the notions of complete and phase synchronization. The Heisenberg principle sets a universal bound to complete synchronization. The measure of phase synchronization is, in principle, unbounded; however, in the absence of quantum resources (e.g., squeezing) the synchronization level is bounded below a certain threshold. We elucidate some interesting connections between entanglement and synchronization and, finally, discuss an application based on quantum optomechanical systems.

Is it worth investing in online continuous education for healthcare staff?

Science.gov (United States)

Mazzoleni, M Cristina; Maugeri, Chiara; Rognoni, Carla; Cantoni, Alessio; Imbriani, Marcello

2012-01-01

Educational activities for hospital staff don't easily match with the congestive rhythm of healthcare personnel working life. Online learning could make it easier for healthcare personnel to attend courses, but there is still uncertainty about the feasibility of using distance learning to effectively meet education goals in healthcare institutions. Fondazione Salvatore Maugeri (FSM) started an online educational program, as pilot project, in October 2010. The present study hence is aimed at evaluating the impact of this initiative (in terms of extent and intensity of healthcare staff attendance; objective and subjective effectiveness) in order to take informed decisions for the future. In 15 months, 5 elearning courses have been provided to 2261 potential users of 14 FSM hospitals, in parallel with traditional education. 1099 users from all the hospital have intensively attended the courses (58% of nurses, 50% of therapists, 44%, of technicians, 25% of physicians) for a total of 27459 CME credits. Effectiveness in terms of knowledge gain is satisfactory and subjective evaluation is good (more than 95% of satisfied users). Elearning is not appropriate for all the educational needs and is not a panacea, but the reported results point out that it may be an effective and economically convenient mean to support massive educational interventions reaching results hardly attainable with traditional education. Users should be better educated about how to exploit online education at best.

Predicting bulk powder flow dynamics in a continuous mixer operating in transitory regimes

OpenAIRE

Ammarcha , Chawki; Gatumel , Cendrine; Dirion , Jean-Louis; Cabassud , Michel; Mizonov , Vadim; Berthiaux , Henri

2012-01-01

International audience; Over recent years there has been increasing interest in continuous powder mixing processes, due mainly to the development of on-line measurement techniques. However, our understanding of these processes remains limited, particularly with regard to their flow and mixing dynamics. In the present work, we study the behaviour of a pilot-scale continuous mixer during transitory regimes, in terms of hold-up weight and outflow changes. We present and discuss experimental resu...

Online and official price indexes: Measuring Argentina's inflation

OpenAIRE

Cavallo, Alberto F.

2013-01-01

Prices collected from online retailers can be used to construct daily price indexes that complement official statistics. This paper studies their ability to match official inflation estimates in five Latin American countries, with a focus on Argentina, where official statistics have been heavily criticized in recent years. The data were collected between October 2007 and March 2011 from the largest supermarket in each country. In Brazil, Chile, Colombia, and Venezuela, online price indexes ap...

Quasi-min-max Fuzzy MPC of UTSG Water Level Based on Off-Line Invariant Set

Science.gov (United States)

Liu, Xiangjie; Jiang, Di; Lee, Kwang Y.

2015-10-01

In a nuclear power plant, the water level of the U-tube steam generator (UTSG) must be maintained within a safe range. Traditional control methods encounter difficulties due to the complexity, strong nonlinearity and “swell and shrink” effects, especially at low power levels. A properly designed robust model predictive control can well solve this problem. In this paper, a quasi-min-max fuzzy model predictive controller is developed for controlling the constrained UTSG system. While the online computational burden could be quite large for the real-time control, a bank of ellipsoid invariant sets together with the corresponding feedback control laws are obtained by off-line solving linear matrix inequalities (LMIs). Based on the UTSG states, the online optimization is simplified as a constrained optimization problem with a bisection search for the corresponding ellipsoid invariant set. Simulation results are given to show the effectiveness of the proposed controller.

Quasi parton distributions and the gradient flow

International Nuclear Information System (INIS)

Monahan, Christopher; Orginos, Kostas

2017-01-01

We propose a new approach to determining quasi parton distribution functions (PDFs) from lattice quantum chromodynamics. By incorporating the gradient flow, this method guarantees that the lattice quasi PDFs are finite in the continuum limit and evades the thorny, and as yet unresolved, issue of the renormalization of quasi PDFs on the lattice. In the limit that the flow time is much smaller than the length scale set by the nucleon momentum, the moments of the smeared quasi PDF are proportional to those of the lightfront PDF. Finally, we use this relation to derive evolution equations for the matching kernel that relates the smeared quasi PDF and the light-front PDF.

The design, implementation, and evaluation of online credit nutrition courses: a systematic review.

Science.gov (United States)

Cohen, Nancy L; Carbone, Elena T; Beffa-Negrini, Patricia A

2011-01-01

To assess how postsecondary online nutrition education courses (ONEC) are delivered, determine ONEC effectiveness, identify theoretical models used, and identify future research needs. Systematic search of database literature. Postsecondary education. Nine research articles evaluating postsecondary ONEC. Knowledge/performance outcomes and student satisfaction, motivation, or perceptions. Systematic search of 922 articles and review of 9 articles meeting search criteria. Little research regarding ONEC marketing/management existed. Studies primarily evaluated introductory courses using email/websites (before 2000), or course management systems (after 2002). None used true experimental designs; just 3 addressed validity or reliability of measures or pilot-tested instruments. Three articles used theoretical models in course design; few used theories to guide evaluations. Four quasi-experimental studies indicated no differences in nutrition knowledge/performance between online and face-to-face learners. Results were inconclusive regarding student satisfaction, motivation, or perceptions. Students can gain knowledge in online as well as in face-to-face nutrition courses, but satisfaction was mixed. More up-to-date investigations on effective practices are warranted, using theories to identify factors that enhance student outcomes, addressing emerging technologies, and documenting ONEC marketing, management, and delivery. Adequate training/support for faculty is needed to improve student experiences and faculty time management. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

The importance of social and collaborative learning for online continuing medical education (OCME): directions for future development and research.

Science.gov (United States)

Sandars, John; Kokotailo, Patricia; Singh, Gurmit

2012-01-01

There is an increasing use of online continuing medical education (OCME), but the potential use of social and collaborative learning to change professional performance and improve patient care has yet to be fully realised. The integration of the main themes from the presentations and comments from participants at a symposium at AMEE 2011. Sociological perspectives on change in professional performance highlight the need for social and collaborative learning in OCME so that learners can share information (explicit knowledge) and opinion (tacit knowledge). The educational topic should be relevant to the complexity of professional practice and use iterative cycles of implementation and critical reflection in social networks so that proposed solutions can be tested in actual practice. The challenge of developing effective online discussions for collaborative learning is recognised. The provision of OCME requires a shift in both policy and practice to emphasise the importance of social and collaborative learning. Further research is recommended, especially to evaluate the implementation and impact of social and collaborative learning for OCME on patient care and the use of newer Web 2.0 approaches.

Differential geometry of quasi-Sasakian manifolds

International Nuclear Information System (INIS)

Kirichenko, V F; Rustanov, A R

2002-01-01

The full system of structure equations of a quasi-Sasakian structure is obtained. The structure of the main tensors on a quasi-Sasakian manifold (the Riemann-Christoffel tensor, the Ricci tensor, and other tensors) is studied on this basis. Interesting characterizations of quasi-Sasakian Einstein manifolds are obtained. Additional symmetry properties of the Riemann-Christoffel tensor are discovered and used for distinguishing a new class of CR 1 quasi-Sasakian manifolds. An exhaustive description of the local structure of manifolds in this class is given. A complete classification (up to the B-transformation of the metric) is obtained for manifolds in this class having additional properties of the isotropy kind

Performance of a fiber optic sensor for online measurement of coating thickness

Science.gov (United States)

D'Emilia, Giulio

1999-01-01

Some aspects concerning a methodology for the measurement of thickness of dry and wet coatings which is based on a fiber optic probe are discussed in order to verify the feasibility of this approach and the capability of such a probe of on- line measuring. In this preliminary step of the research some problems discussed mainly concerning the methodology which has been proposed and which is based on the measuring of the reflectance of the coating plated on thin steel sheets for use in the food industry. Furthermore the effect of the main interfering and modifying quantities is discussed both theoretically and experimentally when the measurement has to be carried out in order to allow on-line coating thickness measurements with satisfactory accuracy.

Volume determination of irregularly-shaped quasi-spherical nanoparticles.

Science.gov (United States)

Attota, Ravi Kiran; Liu, Eileen Cherry

2016-11-01

Nanoparticles (NPs) are widely used in diverse application areas, such as medicine, engineering, and cosmetics. The size (or volume) of NPs is one of the most important parameters for their successful application. It is relatively straightforward to determine the volume of regular NPs such as spheres and cubes from a one-dimensional or two-dimensional measurement. However, due to the three-dimensional nature of NPs, it is challenging to determine the proper physical size of many types of regularly and irregularly-shaped quasi-spherical NPs at high-throughput using a single tool. Here, we present a relatively simple method that determines a better volume estimate of NPs by combining measurements from their top-down projection areas and peak heights using two tools. The proposed method is significantly faster and more economical than the electron tomography method. We demonstrate the improved accuracy of the combined method over scanning electron microscopy (SEM) or atomic force microscopy (AFM) alone by using modeling, simulations, and measurements. This study also exposes the existence of inherent measurement biases for both SEM and AFM, which usually produce larger measured diameters with SEM than with AFM. However, in some cases SEM measured diameters appear to have less error compared to AFM measured diameters, especially for widely used IS-NPs such as of gold, and silver. The method provides a much needed, proper high-throughput volumetric measurement method useful for many applications. Graphical Abstract The combined method for volume determination of irregularly-shaped quasi-spherical nanoparticles.

Performance Comparison of Orthogonal and Quasi-orthogonal Codes in Quasi-Synchronous Cellular CDMA Communication

Science.gov (United States)

Jos, Sujit; Kumar, Preetam; Chakrabarti, Saswat

Orthogonal and quasi-orthogonal codes are integral part of any DS-CDMA based cellular systems. Orthogonal codes are ideal for use in perfectly synchronous scenario like downlink cellular communication. Quasi-orthogonal codes are preferred over orthogonal codes in the uplink communication where perfect synchronization cannot be achieved. In this paper, we attempt to compare orthogonal and quasi-orthogonal codes in presence of timing synchronization error. This will give insight into the synchronization demands in DS-CDMA systems employing the two classes of sequences. The synchronization error considered is smaller than chip duration. Monte-Carlo simulations have been carried out to verify the analytical and numerical results.

Study of the diffusion movements of water by quasi-elastic scattering of slow neutrons

International Nuclear Information System (INIS)

Yamazaki, Ione Makiko

1980-01-01

The diffusion movements of water at three different temperatures in the liquid state have been studied by slow neutron quasi-elastic scattering. The measurements have been performed using the IPEN Triple Axis Spectrometer. Broadening and integrated intensity of the quasi-elastic line have been determined for several momentum transfer (K) in the range 0,7627 ≤ K ≤ 2,993 A -1 . The broadening of the quasi-elastic peaks as function of momentum transfer (K) observed at various temperatures has been interpreted in terms of globular diffusion models. The results obtained at 30 deg C have been explained in a consistent way considering the translational and rotational globular diffusion movements. To describe the results obtained at 55 deg and 70 deg C only the translational globular diffusion model was sufficient. This analysis indicates the existence in water of globules with distance of the farest proton position to the center of gravity of the globule 4,5 A, corroborating the idea of quasi-crystalline structure for water. The Debye-Waller factor has been obtained through the analysis of the integrated intensity of quasi-elastic scattering peaks over the K 2 measured range. From this analysis an estimative of the mean square displacement was obtained. (author)

On-line confidence monitoring during decision making.

Science.gov (United States)

Dotan, Dror; Meyniel, Florent; Dehaene, Stanislas

2018-02-01

Humans can readily assess their degree of confidence in their decisions. Two models of confidence computation have been proposed: post hoc computation using post-decision variables and heuristics, versus online computation using continuous assessment of evidence throughout the decision-making process. Here, we arbitrate between these theories by continuously monitoring finger movements during a manual sequential decision-making task. Analysis of finger kinematics indicated that subjects kept separate online records of evidence and confidence: finger deviation continuously reflected the ongoing accumulation of evidence, whereas finger speed continuously reflected the momentary degree of confidence. Furthermore, end-of-trial finger speed predicted the post-decisional subjective confidence rating. These data indicate that confidence is computed on-line, throughout the decision process. Speed-confidence correlations were previously interpreted as a post-decision heuristics, whereby slow decisions decrease subjective confidence, but our results suggest an adaptive mechanism that involves the opposite causality: by slowing down when unconfident, participants gain time to improve their decisions. Copyright © 2017 Elsevier B.V. All rights reserved.

Sensitivity analysis explains quasi-one-dimensional current transport in two-dimensional materials

DEFF Research Database (Denmark)

Boll, Mads; Lotz, Mikkel Rønne; Hansen, Ole

2014-01-01

We demonstrate that the quasi-one-dimensional (1D) current transport, experimentally observed in graphene as measured by a collinear four-point probe in two electrode configurations A and B, can be interpreted using the sensitivity functions of the two electrode configurations (configurations...... A and B represents different pairs of electrodes chosen for current sources and potential measurements). The measured sheet resistance in a four-point probe measurement is averaged over an area determined by the sensitivity function. For a two-dimensional conductor, the sensitivity functions for electrode...... configurations A and B are different. But when the current is forced to flow through a percolation network, e.g., graphene with high density of extended defects, the two sensitivity functions become identical. This is equivalent to a four-point measurement on a line resistor, hence quasi-1D transport...

Toward a Principled Sampling Theory for Quasi-Orders.

Science.gov (United States)

Ünlü, Ali; Schrepp, Martin

2016-01-01

Quasi-orders, that is, reflexive and transitive binary relations, have numerous applications. In educational theories, the dependencies of mastery among the problems of a test can be modeled by quasi-orders. Methods such as item tree or Boolean analysis that mine for quasi-orders in empirical data are sensitive to the underlying quasi-order structure. These data mining techniques have to be compared based on extensive simulation studies, with unbiased samples of randomly generated quasi-orders at their basis. In this paper, we develop techniques that can provide the required quasi-order samples. We introduce a discrete doubly inductive procedure for incrementally constructing the set of all quasi-orders on a finite item set. A randomization of this deterministic procedure allows us to generate representative samples of random quasi-orders. With an outer level inductive algorithm, we consider the uniform random extensions of the trace quasi-orders to higher dimension. This is combined with an inner level inductive algorithm to correct the extensions that violate the transitivity property. The inner level correction step entails sampling biases. We propose three algorithms for bias correction and investigate them in simulation. It is evident that, on even up to 50 items, the new algorithms create close to representative quasi-order samples within acceptable computing time. Hence, the principled approach is a significant improvement to existing methods that are used to draw quasi-orders uniformly at random but cannot cope with reasonably large item sets.

Toward a Principled Sampling Theory for Quasi-Orders

Science.gov (United States)

Ünlü, Ali; Schrepp, Martin

2016-01-01

Quasi-orders, that is, reflexive and transitive binary relations, have numerous applications. In educational theories, the dependencies of mastery among the problems of a test can be modeled by quasi-orders. Methods such as item tree or Boolean analysis that mine for quasi-orders in empirical data are sensitive to the underlying quasi-order structure. These data mining techniques have to be compared based on extensive simulation studies, with unbiased samples of randomly generated quasi-orders at their basis. In this paper, we develop techniques that can provide the required quasi-order samples. We introduce a discrete doubly inductive procedure for incrementally constructing the set of all quasi-orders on a finite item set. A randomization of this deterministic procedure allows us to generate representative samples of random quasi-orders. With an outer level inductive algorithm, we consider the uniform random extensions of the trace quasi-orders to higher dimension. This is combined with an inner level inductive algorithm to correct the extensions that violate the transitivity property. The inner level correction step entails sampling biases. We propose three algorithms for bias correction and investigate them in simulation. It is evident that, on even up to 50 items, the new algorithms create close to representative quasi-order samples within acceptable computing time. Hence, the principled approach is a significant improvement to existing methods that are used to draw quasi-orders uniformly at random but cannot cope with reasonably large item sets. PMID:27965601

Development and application of model RAIA uranium on-line analyser

International Nuclear Information System (INIS)

Dong Yanwu; Song Yufen; Zhu Yaokun; Cong Peiyuan; Cui Songru

1999-01-01

The working principle, structure, adjustment and application of model RAIA on-line analyser are reported. The performance of this instrument is reliable. For identical sample, the signal fluctuation in continuous monitoring for four months is less than +-1%. According to required measurement range, appropriate length of sample cell is chosen. The precision of measurement process is better than 1% at 100 g/L U. The detection limit is 50 mg/L. The uranium concentration in process stream can be displayed automatically and printed at any time. It presents 4∼20 mA current signal being proportional to the uranium concentration. This makes a long step towards process continuous control and computer management

Measurement properties of continuous text reading performance tests.

Science.gov (United States)

Brussee, Tamara; van Nispen, Ruth M A; van Rens, Ger H M B

2014-11-01

Measurement properties of tests to assess reading acuity or reading performance have not been extensively evaluated. This study aims to provide an overview of the literature on available continuous text reading tests and their measurement properties. A literature search was performed in PubMed, Embase and PsycInfo. Subsequently, information on design and content of reading tests, study design and measurement properties were extracted using consensus-based standards for selection of health measurement instruments. Quality of studies, reading tests and measurement properties were systematically assessed using pre-specified criteria. From 2334 identified articles, 20 relevant articles were found on measurement properties of three reading tests in various languages: IReST, MNread Reading Test and Radner Reading Charts. All three reading tests scored high on content validity. Reproducibility studies (repeated measurements between different testing sessions) of the IReST and MNread of commercially available reading tests in different languages were missing. The IReST scored best on inter-language comparison, the MNread scored well in repeatability studies (repeated measurements under the same conditions) and the Radner showed good reproducibility in studies. Although in daily practice there are other continuous text reading tests available meeting the criteria of this review, measurement properties were described in scientific studies for only three of them. Of the few available studies, the quality and content of study design and methodology used varied. For testing existing reading tests and the development of new ones, for example in other languages, we make several recommendations, including careful description of patient characteristics, use of objective and subjective lighting levels, good control of working distance, documentation of the number of raters and their training, careful documentation of scoring rules and the use of Bland-Altman analyses or similar for

Quasi-topological Ricci polynomial gravities

Science.gov (United States)

Li, Yue-Zhou; Liu, Hai-Shan; Lü, H.

2018-02-01

Quasi-topological terms in gravity can be viewed as those that give no contribution to the equations of motion for a special subclass of metric ansätze. They therefore play no rôle in constructing these solutions, but can affect the general perturbations. We consider Einstein gravity extended with Ricci tensor polynomial invariants, which admits Einstein metrics with appropriate effective cosmological constants as its vacuum solutions. We construct three types of quasi-topological gravities. The first type is for the most general static metrics with spherical, toroidal or hyperbolic isometries. The second type is for the special static metrics where g tt g rr is constant. The third type is the linearized quasitopological gravities on the Einstein metrics. We construct and classify results that are either dependent on or independent of dimensions, up to the tenth order. We then consider a subset of these three types and obtain Lovelock-like quasi-topological gravities, that are independent of the dimensions. The linearized gravities on Einstein metrics on all dimensions are simply Einstein and hence ghost free. The theories become quasi-topological on static metrics in one specific dimension, but non-trivial in others. We also focus on the quasi-topological Ricci cubic invariant in four dimensions as a specific example to study its effect on holography, including shear viscosity, thermoelectric DC conductivities and butterfly velocity. In particular, we find that the holographic diffusivity bounds can be violated by the quasi-topological terms, which can induce an extra massive mode that yields a butterfly velocity unbound above.

Research and design of quasi-optical mode converter

International Nuclear Information System (INIS)

Liu Jianwei; Zhao Qing

2013-01-01

This paper presents a quasi-optical mode converter which can convert the output mode of gyrotrons and other high-power microwave oscillators into quasi-Gaussian beam, aiming to achieve transverse output of quasi-Gaussian beam TEM 00 mode. First, we analyze mode propagation in the waveguide and the working mechanism of the Vlasov launcher. Then the radiation fields are calculated using vector diffraction theory. At last a quasi-optical mode converter is designed to convert the 94 GHz, TE 62 mode millimeter wave into quasi-Gaussian beam with programming method. The results prove that quasi-Gaussian mode can be obtained at the output window with a simple Vlasov launcher and two mirrors, and the power transmission efficiency of the quasi-optical mode converter reaches to 87.5%. (authors)

Photoelectric-enhanced radiation therapy with quasi-monochromatic computed tomography

International Nuclear Information System (INIS)

Jost, Gregor; Mensing, Tristan; Golfier, Sven; Lawaczeck, Ruediger; Pietsch, Hubertus; Huetter, Joachim; Cibik, Levent; Gerlach, Martin; Krumrey, Michael; Fratzscher, Daniel; Arkadiev, Vladimir; Wedell, Reiner; Haschke, Michael; Langhoff, Norbert; Wust, Peter; Luedemann, Lutz

2009-01-01

Photoelectric-enhanced radiation therapy is a bimodal therapy, consisting of the administration of highly radiation-absorbing substances into the tumor area and localized regional irradiation with orthovoltage x-rays. Irradiation can be performed by a modified computed tomography (CT) unit equipped with an additional x-ray optical module which converts the polychromatic, fan-shaped CT beam into a monochromatized and focused beam for energy-tuned photoelectric-enhanced radiotherapy. A dedicated x-ray optical module designed for spatial collimation, focusing, and monochromatization was mounted at the exit of the x-ray tube of a clinical CT unit. Spectrally resolved measurements of the resulting beam were performed using an energy-dispersive detection system calibrated by synchrotron radiation. The spatial photon fluence was determined by film dosimetry. Depth-dose measurements were performed and compared to the polychromatic CT and a therapeutic 6 MV beam. The spatial dose distribution in phantoms using a rotating radiation source (quasi-monochromatic CT and 6 MV, respectively) was investigated by gel dosimetry. The photoelectric dose enhancement for an iodine fraction of 1% in tissue was calculated and verified experimentally. The x-ray optical module selectively filters the energy of the tungsten Kα emission line with an FWHM of 5 keV. The relative photon fluence distribution demonstrates the focusing characteristic of the x-ray optical module. A beam width of about 3 mm was determined at the isocenter of the CT gantry. The depth-dose measurements resulted in a half-depth value of approximately 36 mm for the CT beams (quasi-monochromatic, polychromatic) compared to 154 mm for the 6 MV beam. The rotation of the radiation source leads to a steep dose gradient at the center of rotation; the gel dosimetry yields an entrance-to-peak dose ratio of 1:10.8 for the quasi-monochromatic CT and 1:37.3 for a 6 MV beam of the same size. The photoelectric dose enhancement factor

Photoelectric-enhanced radiation therapy with quasi-monochromatic computed tomography

Energy Technology Data Exchange (ETDEWEB)

Jost, Gregor; Mensing, Tristan; Golfier, Sven; Lawaczeck, Ruediger; Pietsch, Hubertus; Huetter, Joachim; Cibik, Levent; Gerlach, Martin; Krumrey, Michael; Fratzscher, Daniel; Arkadiev, Vladimir; Wedell, Reiner; Haschke, Michael; Langhoff, Norbert; Wust, Peter; Luedemann, Lutz [TRG Diagnostic Imaging, Bayer Schering Pharma AG, 13353 Berlin (Germany); Department of Radiotherapy, Charite Medical Centre, 13353 Berlin (Germany); TRG Diagnostic Imaging, Bayer Schering Pharma AG, 13353 Berlin (Germany); Physikalisch-Technische Bundesanstalt, 10587 Berlin (Germany); Institute of Applied Photonics e.V., 12489 Berlin (Germany); Institute for Scientific Instruments GmbH, 12489 Berlin (Germany); Department of Radiotherapy, Charite Medical Centre, 13353 Berlin (Germany)

2009-06-15

Photoelectric-enhanced radiation therapy is a bimodal therapy, consisting of the administration of highly radiation-absorbing substances into the tumor area and localized regional irradiation with orthovoltage x-rays. Irradiation can be performed by a modified computed tomography (CT) unit equipped with an additional x-ray optical module which converts the polychromatic, fan-shaped CT beam into a monochromatized and focused beam for energy-tuned photoelectric-enhanced radiotherapy. A dedicated x-ray optical module designed for spatial collimation, focusing, and monochromatization was mounted at the exit of the x-ray tube of a clinical CT unit. Spectrally resolved measurements of the resulting beam were performed using an energy-dispersive detection system calibrated by synchrotron radiation. The spatial photon fluence was determined by film dosimetry. Depth-dose measurements were performed and compared to the polychromatic CT and a therapeutic 6 MV beam. The spatial dose distribution in phantoms using a rotating radiation source (quasi-monochromatic CT and 6 MV, respectively) was investigated by gel dosimetry. The photoelectric dose enhancement for an iodine fraction of 1% in tissue was calculated and verified experimentally. The x-ray optical module selectively filters the energy of the tungsten K{alpha} emission line with an FWHM of 5 keV. The relative photon fluence distribution demonstrates the focusing characteristic of the x-ray optical module. A beam width of about 3 mm was determined at the isocenter of the CT gantry. The depth-dose measurements resulted in a half-depth value of approximately 36 mm for the CT beams (quasi-monochromatic, polychromatic) compared to 154 mm for the 6 MV beam. The rotation of the radiation source leads to a steep dose gradient at the center of rotation; the gel dosimetry yields an entrance-to-peak dose ratio of 1:10.8 for the quasi-monochromatic CT and 1:37.3 for a 6 MV beam of the same size. The photoelectric dose enhancement

The effectiveness of online cognitive behavioral treatment in routine clinical practice.

Directory of Open Access Journals (Sweden)

Jeroen Ruwaard

Full Text Available Randomized controlled trails have identified online cognitive behavioral therapy as an efficacious intervention in the management of common mental health disorders.To assess the effectiveness of online CBT for different mental disorders in routine clinical practice.An uncontrolled before-after study, with measurements at baseline, posttest, 6-week follow-up, and 1-year follow-up.1500 adult patients (female: 67%; mean age: 40 years with a GP referral for psychotherapy were treated at a Dutch online mental health clinic for symptoms of depression (n = 413, panic disorder (n = 139, posttraumatic stress (n = 478, or burnout (n = 470.Manualized, web-based, therapist-assisted CBT, of which the efficacy was previously demonstrated in a series of controlled trials. Standardized duration of treatment varied from 5 weeks (online CBT for Posttraumatic stress to 16 weeks (online CBT for Depression.Validated self-report questionnaires of specific and general psychopathology, including the Beck Depression Inventory, the Impact of Event Scale, the Panic Disorder Severity Scale-Self Report, the Oldenburg Burnout Inventory, and the Depression Anxiety Stress Scales.Treatment adherence was 71% (n = 1071. Study attrition was 21% at posttest, 33% at 6-week FU and 65% at 1-year FU. Mixed-model repeated measures regression identified large short-term reductions in all measures of primary symptoms (d = 1.9±0.2 to d = 1.2±0.2; P<.001, which sustained up to one year after treatment. At posttest, rates of reliable improvement and recovery were 71% and 52% in the completer sample (full sample: 55%/40%. Patient satisfaction was high.Results suggest that online therapist-assisted CBT may be as effective in routine practice as it is in clinical trials. Although pre-treatment withdrawal and long-term outcomes require further study, results warrant continued implementation of online CBT.

Measurement of the Antineutrino Double-Differential Charged-Current Quasi-Elastic Scattering Cross Section at MINERvA

Energy Technology Data Exchange (ETDEWEB)

Patrick, Cheryl [Northwestern U.

2016-01-01

Next-generation neutrino oscillation experiments, such as DUNE and Hyper-Kamiokande, hope to measure charge-parity (CP) violation in the lepton sector. In order to do this, they must dramatically reduce their current levels of uncertainty, particularly those due to neutrino-nucleus interaction models. As CP violation is a measure of the difference between the oscillation properties of neutrinos and antineutrinos, data about how the less-studied antineutrinos interact is especially valuable. We present the MINERvA experiment's first double-differential scattering cross sections for antineutrinos on scintillator, in the few-GeV range relevant to experiments such as DUNE and NOvA. We also present total antineutrino-scintillator quasi-elastic cross sections as a function of energy, which we compare to measurements from previous experiments. As well as being useful to help reduce oscillation experiments' uncertainty, our data can also be used to study the prevalence of various cor relation and final-state interaction effects within the nucleus. We compare to models produced by different model generators, and are able to draw first conclusions about the predictions of these models.

Measuring coating thicknesses on continuously moving material

International Nuclear Information System (INIS)

Holler, J.H.; Stanton, W.B.; Spongr, J.J.; Joffe, B.B.; Raffelsberger, P.W.; Tiebor, J.E.

1982-01-01

A method and apparatus using radiation techniques for measuring coating thicknesses on continuously moving strip material without altering a predetermined path along which it travels. A shuttle carrying a measuring probe having a radioactive isotope source and a detection device is provided for reciprocation along a preselected segment of the path of the strip. The shuttle and the probe are releasably engaged with the strip and carried thereby for synchronous movement therewith in the forward direction during a measurement cycle, and are disengaged from the strip when no measurement is being made, the movement of the shuttle then being controlled by an independent drive mechanism, shown as a belt drive, which reciprocates the shuttle along the rails. A belt drives it forward more slowly than the strip, which then engages the shuttle to pull it at strip speed, allowed by a pulley clutch. (author)

Multi-quasi-particle states in 173Hf

International Nuclear Information System (INIS)

Fabricius, B.; Dracoulis, G.D.; Kibedi, T.; Stuchbery, A.E.; Baxter, A.M.

1991-01-01

Rotational bands built on 1, 3 and 5 quasi-particle (qp) states in 173 Hf have been populated to medium and high spins through the 160 Gd( 18 O, 5n) reaction. The 1qp bands, previously identified as the 1/2 - [521], 5/2 - [512] and 7/2 + [633] (mixed i 13/2 ) Nilsson configurations, have been extended past the first back-bend and show different alignment properties, possibly originating from deformation differences. The multi-particle states were identified from excitation energies, the properties of their associated band structures and decay patterns. The 3qp states are the previously known K π =19/2 + and 23/2 - isomeric states originating from the 7/2 + [633] quasi-neutron coupled to the 6 + and 8 - , 2-quasi-proton excitations and a K π =(13/2 + ) state possibly containing the three lowest quasi-neutrons. A 5qp state with K π =(29/2 - ) was identified as the same three lowest lying quasi-neutrons coupled to the 8 - , 2-quasi-proton excitation. The low excitation energies of these two related 3- and 5-quasi-particle states implies a reduced neutron pairing gap, which can be attributed to the effect of blocking. (orig.)

Rasch Measurement of Collaborative Problem Solving in an Online Environment.

Science.gov (United States)

Harding, Susan-Marie E; Griffin, Patrick E

2016-01-01

This paper describes an approach to the assessment of human to human collaborative problem solving using a set of online interactive tasks completed by student dyads. Within the dyad, roles were nominated as either A or B and students selected their own roles. The question as to whether role selection affected individual student performance measures is addressed. Process stream data was captured from 3402 students in six countries who explored the problem space by clicking, dragging the mouse, moving the cursor and collaborating with their partner through a chat box window. Process stream data were explored to identify behavioural indicators that represented elements of a conceptual framework. These indicative behaviours were coded into a series of dichotomous items. These items represented actions and chats performed by students. The frequency of occurrence was used as a proxy measure of item difficulty. Then given a measure of item difficulty, student ability could be estimated using the difficulty estimates of the range of items demonstrated by the student. The Rasch simple logistic model was used to review the indicators to identify those that were consistent with the assumptions of the model and were invariant across national samples, language, curriculum and age of the student. The data were analysed using a one and two dimension, one parameter model. Rasch separation reliability, fit to the model, distribution of students and items on the underpinning construct, estimates for each country and the effect of role differences are reported. This study provides evidence that collaborative problem solving can be assessed in an online environment involving human to human interaction using behavioural indicators shown to have a consistent relationship between the estimate of student ability, and the probability of demonstrating the behaviour.

A successful online mentoring program for nurses.

Science.gov (United States)

O'Keefe, Trish; Forrester, David Anthony Tony

2009-01-01

This article describes the successful implementation of An Online Mentoring Program for Nurses at a Magnet-designated acute care medical center, Morristown Memorial Hospital (MMH/Atlantic Health). A comprehensive approach to incorporating mentor-protégée teams into professional nurse role development has been demonstrated to (1) improve nurse employee satisfaction, retention, and recruitment outcomes; (2) change the ways nurses and others perceive nurses; (3) augment support by managers and coworkers; and (4) improve patient care outcomes. Nurses are partnered in mentor-protégée relationships and continually engage one another by evaluating the protégée's unique contributions and identifying specific strategic actions to move the protégée toward accomplishing their professional objectives. Building an online mentor-protégée collaboration: (1) maximizing potential, (2) identifying the protégée's unique contributions, and (3) strategic planning. The online mentoring process is a success and has delivered measurable results that have benefited the nurse participants and contributed to our institution's culture of nursing engagement. The online mentoring process has potential to benefit nurses and their organizations by (1) providing real-time communication, (2) facilitating strategic thinking, (3) monitoring progress, (4) "going green," and (5) improving organizational knowledge.

Brownian quasi-particles in statistical physics

International Nuclear Information System (INIS)

Tellez-Arenas, A.; Fronteau, J.; Combis, P.

1979-01-01

The idea of a Brownian quasi-particle and the associated differentiable flow (with nonselfadjoint forces) are used here in the context of a stochastic description of the approach towards statistical equilibrium. We show that this quasi-particle flow acquires, at equilibrium, the principal properties of a conservative Hamiltonian flow. Thus the model of Brownian quasi-particles permits us to establish a link between the stochastic description and the Gibbs description of statistical equilibrium

Refractory thermowell for continuous high temperature measurement of molten metal

International Nuclear Information System (INIS)

Thiesen, T.J.

1992-01-01

This patent describes a vessel for handling molten metal having an interior refractory lining, apparatus for continuous high temperature measurement of the molten metal. It comprises a thermowell; the thermowell containing a multiplicity of thermocouples; leads being coupled to a means for continuously indicating the temperature of the molten metal in the vessel

Quasi-isentropic compression using compressed water flow generated by underwater electrical explosion of a wire array

Science.gov (United States)

Gurovich, V.; Virozub, A.; Rososhek, A.; Bland, S.; Spielman, R. B.; Krasik, Ya. E.

2018-05-01

A major experimental research area in material equation-of-state today involves the use of off-Hugoniot measurements rather than shock experiments that give only Hugoniot data. There is a wide range of applications using quasi-isentropic compression of matter including the direct measurement of the complete isentrope of materials in a single experiment and minimizing the heating of flyer plates for high-velocity shock measurements. We propose a novel approach to generating quasi-isentropic compression of matter. Using analytical modeling and hydrodynamic simulations, we show that a working fluid composed of compressed water, generated by an underwater electrical explosion of a planar wire array, might be used to efficiently drive the quasi-isentropic compression of a copper target to pressures ˜2 × 1011 Pa without any complex target designs.

On-line depth measurement for laser-drilled holes based on the intensity of plasma emission

Science.gov (United States)

Ho, Chao-Ching; Chiu, Chih-Mu; Chang, Yuan-Jen; Hsu, Jin-Chen; Kuo, Chia-Lung

2014-09-01

The direct time-resolved depth measurement of blind holes is extremely difficult due to the short time interval and the limited space inside the hole. This work presents a method that involves on-line plasma emission acquisition and analysis to obtain correlations between the machining processes and the optical signal output. Given that the depths of laser-machined holes can be estimated on-line using a coaxial photodiode, this was employed in our inspection system. Our experiments were conducted in air under normal atmospheric conditions without gas assist. The intensity of radiation emitted from the vaporized material was found to correlate with the depth of the hole. The results indicate that the estimated depths of the laser-drilled holes were inversely proportional to the maximum plasma light emission measured for a given laser pulse number.

Quasi-periodic luminosity variations in dwarf novae

International Nuclear Information System (INIS)

Robinson, E.L.; Nather, R.E.

1979-01-01

We have identified quasi-periodic oscillations in the light curves of five dwarf novae--U Gem, SS Cyg, RU Peg, KT Per, and VW Hyi-- and in the light curve of the quasi-periodic X-ray source Sco X-1. The mean periods of the quasi-periodic oscillations range from 32 s in SS Cyg to 147 s in KT Per and 165 s in Sco X-l. Their amplitudes are typically 0.005--0.0l mag. The properties of the quasi-periodic oscillations are represented well by a second-order autoregressive process. Use of this representation shows that the length of time over which the quasi-periodic oscillations maintain coherence is very short, typically 3--5 cycles of the oscillations. Thus the quasi-periodic oscillations can be distinguished from the short-period coherent oscillations in dwarf novae, which are usually interpreted as white dwarf pulsations, because t the periods of the quasi-periodic oscillations are 3--4 times longer and their coherence time is much shorter. The quasi-periodic oscillations occur in dwarf novae only during their eruptions and occur in Sco X-l only when the system is bright. The presence of the oscillations does not depend on the subclass to which a dwarf nova belongs or on the morphology of the individual eruptions. We argue that their short periods, their short coherence times, and their presence in Sco X-l require that the quasi-periodic oscillations be produced by the accretion disk, and not by the stars or by the boundary between the a accretion disk and its central star

Consequences of nonclassical measurement for the algorithmic description of continuous dynamical systems

Science.gov (United States)

Fields, Chris

1989-01-01

Continuous dynamical systems intuitively seem capable of more complex behavior than discrete systems. If analyzed in the framework of the traditional theory of computation, a continuous dynamical system with countablely many quasistable states has at least the computational power of a universal Turing machine. Such an analyses assumes, however, the classical notion of measurement. If measurement is viewed nonclassically, a continuous dynamical system cannot, even in principle, exhibit behavior that cannot be simulated by a universal Turing machine.

Natural gas large volumes measurement: going for on-line custody transfer; Medicao de grandes volumes de gas natural: rumo a transferencia de custodia on-line

Energy Technology Data Exchange (ETDEWEB)

Mercon, Eduardo G.; Frisoli, Caetano [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

2005-07-01

This paper describes the structure of the natural gas flow measurement process in TRANSPETRO, and comments features and performance of existing or under-implantation equipment and systems, reviewing best practices and technology in use. This process runs through three interrelated segments: data flow measurement, strictly speaking; data transfer and acquisition; and data flow measurement certification (data consolidation to invoice). Initially, the work makes an approach to the data flow measurement segment, evaluating technical features of flow meters, and describing configurations and functions of the operating gas flow computers in TRANSPETRO's custody transfer stations. In this part it will also be presented the implantation of TRANSPETRO's system for gas chromatography data input on-line to flow computers. Further, in data transfer and acquisition, SCADA system technical aspects will be evaluated, considering communications protocols and programmable logic controllers functions in remote terminal units, and discussing their places in the measurement process. Additionally, TRANSPETRO's experience in data measurement certification tools is in discussion, as well as new upcoming tools and their potential features, from what new practices will be suggested. Finally, all the work has been conceived and carried out always aiming to the state-of-the-art technology in gas flow measurement: on-line custody transfer. (author)

African Journals Online (AJOL)

African Journals Online (AJOL)

African Journals OnLine (AJOL) is the world's largest and pre-eminent ... Continuing Medical Education; The competitive advantage of nations: is Porter's ... Ethiopian Journal of Education and Sciences; Advertising practice in Nigeria: ...

Using online public services: a measurement of citizens’ operational, formal, information and strategic skills

NARCIS (Netherlands)

van Deursen, Alexander Johannes Aloysius Maria; van Dijk, Johannes A.G.M.; Wimmer, Maria A.; Scholl, Hans J.; Ferro, Enrico

2008-01-01

It is important to take digital inequality research in consideration when focusing on electronic public service delivery. From this point of view, this paper considers four digital skills that citizens need when using online public services. Measurements of these skills in the Netherlands indicate

Generalized quasi variational inequalities

Energy Technology Data Exchange (ETDEWEB)

Noor, M.A. [King Saud Univ., Riyadh (Saudi Arabia)

1996-12-31

In this paper, we establish the equivalence between the generalized quasi variational inequalities and the generalized implicit Wiener-Hopf equations using essentially the projection technique. This equivalence is used to suggest and analyze a number of new iterative algorithms for solving generalized quasi variational inequalities and the related complementarity problems. The convergence criteria is also considered. The results proved in this paper represent a significant improvement and refinement of the previously known results.

LPTAU, Quasi Random Sequence Generator

International Nuclear Information System (INIS)

Sobol, Ilya M.

1993-01-01

1 - Description of program or function: LPTAU generates quasi random sequences. These are uniformly distributed sets of L=M N points in the N-dimensional unit cube: I N =[0,1]x...x[0,1]. These sequences are used as nodes for multidimensional integration; as searching points in global optimization; as trial points in multi-criteria decision making; as quasi-random points for quasi Monte Carlo algorithms. 2 - Method of solution: Uses LP-TAU sequence generation (see references). 3 - Restrictions on the complexity of the problem: The number of points that can be generated is L 30 . The dimension of the space cannot exceed 51

Supersonic quasi-axisymmetric vortex breakdown

Science.gov (United States)

Kandil, Osama A.; Kandil, Hamdy A.; Liu, C. H.

1991-01-01

An extensive computational study of supersonic quasi-axisymmetric vortex breakdown in a configured circular duct is presented. The unsteady, compressible, full Navier-Stokes (NS) equations are used. The NS equations are solved for the quasi-axisymmetric flows using an implicit, upwind, flux difference splitting, finite volume scheme. The quasi-axisymmetric solutions are time accurate and are obtained by forcing the components of the flowfield vector to be equal on two axial planes, which are in close proximity of each other. The effect of Reynolds number, for laminar flows, on the evolution and persistence of vortex breakdown, is studied. Finally, the effect of swirl ration at the duct inlet is investigated.

Acceptability of Parental Financial Incentives and Quasi-Mandatory Interventions for Preschool Vaccinations: Triangulation of Findings from Three Linked Studies.

Directory of Open Access Journals (Sweden)

Jean Adams

Full Text Available Childhood vaccinations are a core component of public health programmes globally. Recent measles outbreaks in the UK and USA have prompted debates about new ways to increase uptake of childhood vaccinations. Parental financial incentives and quasi-mandatory interventions (e.g. restricting entry to educational settings to fully vaccinated children have been successfully used to increase uptake of childhood vaccinations in developing countries, but there is limited evidence of effectiveness in developed countries. Even if confirmed to be effective, widespread implementation of these interventions is dependent on acceptability to parents, professionals and other stakeholders.We conducted a systematic review (n = 11 studies included, a qualitative study with parents (n = 91 and relevant professionals (n = 24, and an on-line survey with embedded discrete choice experiment with parents (n = 521 exploring acceptability of parental financial incentives and quasi-mandatory interventions for preschool vaccinations. Here we use Triangulation Protocol to synthesise findings from the three studies.There was a consistent recognition that incentives and quasi-mandatory interventions could be effective, particularly in more disadvantaged groups. Universal incentives were consistently preferred to targeted ones, but relative preferences for quasi-mandatory interventions and universal incentives varied between studies. The qualitative work revealed a consistent belief that financial incentives were not considered an appropriate motivation for vaccinating children. The costs of financial incentive interventions appeared particularly salient and there were consistent concerns in the qualitative work that incentives did not represent the best use of resources for promoting preschool vaccinations. Various suggestions for improving delivery of the current UK vaccination programme as an alternative to incentives and quasi-mandates were made.Parental financial

Positron creation in superheavy quasi-molecules

International Nuclear Information System (INIS)

Mueller, B.

1976-01-01

The review of positron creation in superheavy quasi-molecules includes spontaneous positron emission from superheavy atoms, supercritical quasi-molecules, background effects, and some implications of the new ground state. 66 references

Quantum Quasi-Paradoxes and Quantum Sorites Paradoxes

CERN Document Server

Smarandache, F

1997-01-01

There can be generated many paradoxes or quasi-paradoxes that may occur from the combination of quantum and non-quantum worlds in physics. Even the passage from the micro-cosmos to the macro-cosmos, and reciprocally, can generate unsolved questions or counter-intuitive ideas. We define a quasi-paradox as a statement which has a prima facie self-contradictory support or an explicit contradiction, but which is not completely proven as a paradox. We present herein four elementary quantum quasi-paradoxes and their corresponding quantum Sorites paradoxes, which form a class of quantum quasi-paradoxes.

Lost in Translation: Importance of Effective Communication in Online Education

Science.gov (United States)

Betts, Kristen

2009-01-01

Approximately 3.9 million students enrolled in at least one online course in fall 2007. According to Allen and Seaman (2008), online education growth rates have continued to outpace total higher education growth rates and there are no signs of online growth slowing down. As higher education institutions offer increasing numbers of online and…

Multi-quasi-particles states in 173Hf

International Nuclear Information System (INIS)

Fabricius, B.; Dracoulis, G.D.; Kibedi, T.; Stuchbery, A.E.; Baxter, A.M.

1990-10-01

Rotational bands built on 1, 3 and 5 quasi-particle (qp) states in 173 Hf have been populated to medium and high spins through the 160 Gd ( 18 O,5n) reaction. The 1qp bands, previously identified as the 1/2 - [521], 5/2 - [512] and 7/2 + [633] (mixed i 1 3 /2 ) Nilsson configurations, have been extended past the first back-bend and show different alignment properties, possibly originating from deformation differences. The multi-particle states were identified from excitation energies, the properties of their associated band structures and decay patterns. The 3 qp states are the previously known K π 19/2 + and 23/2 - isomeric states originating from the 7/2 + [633] quasi-neutron coupled to the 6 + and 8 - , 2-quasi-proton excitations and a K π = (13/2 + ) state possibly containing the three lowest quasi-neutrons. A 5 qp state with K π = (29/2 - ) was identified as the same three lowest lying quasi-neutrons coupled to the 8 - , 2-quasi-proton excitation. The low excitation energies of these two related 3- and 5-quasi-particle states implies a reduced neutron pairing gap, which can be attributed to the effect of blocking. 28 refs., 2 tabs., 9 figs

Spinons, Solitons, and Breathers in Quasi-One-Dimensional Magnets

Science.gov (United States)

Broholm, Collin

2006-03-01

By scattering neutrons from coordination polymer magnets, we contrast the effects of a uniform and a staggered magnetic field on the quantum critical state of a spin-1/2 chain. In a partially magnetized state of copper pyrazine dinitrate (CuPzN) we find bounded spectral continua indicating that neutrons scatter from spin-1/2 quasi-particle pairs [1]. The complex boundaries including an incommensurate soft spot result from a field induced shift in the Fermi points for these quasi-particles. The measurements indicate that the magnetized state of CuPzN remains quantum critical. Copper benzoate [2] and CuCl2^.2(dimethylsulfoxide) (CDC) [3] differ from CuPzN in that there are two spins per unit cell along the spin chain. Rather than continuous spectra, we find resolution limited gapped excitations when these materials are subject to high fields. So with two spins per unit cell, an applied field can drive the spin-1/2 chain away from criticality. The explanation for this effect was provided by Affleck and Oshikawa. The alternating coordination environment induces a transverse staggered field and spinon binding. The quantum sine-Gordon model is the relevant low energy field theory and it predicts soliton and breather excitations at specific energies and wave vectors that we compare to the experiments. We shall also compare a complete measurement of the dynamic spin correlation function for CDC in a field to exact diagonalization results for a spin-1/2 chain with a staggered and uniform magnetic field [4]. [1] M. B. Stone, D. H. Reich, C. Broholm, K. Lefmann, C. Rischel, C. P. Landee, and M. M. Turnbull, Phys. Rev. Lett. 91, 037205 (2003). [2] M. Kenzelmann, Y. Chien, C. Broholm, D. H. Reich, and Y. Qiu, Phys. Rev. Lett. 93, 017204 (2004). [3] D. C. Dender, P. R. Hammar, Daniel H. Reich, C. Broholm, and G. Aeppli, Phys. Rev. Lett. 79, 1750 (1997). [4] M. Kenzelmann, C. D. Batista, Y. Chen, C. Broholm, D. H. Reich, S. Park, and Y. Qiu, Phys. Rev. B 71, 094411 (2005).

African Journals Online (AJOL)

African Journals Online (AJOL)

African Journals OnLine (AJOL) is the world's largest and pre-eminent collection ... Continuing Medical Education; The competitive advantage of nations: is Porter's ... AFRREV IJAH: An International Journal of Arts and Humanities; Advertising ...

Quasi experimental designs in pharmacist intervention research.

Science.gov (United States)

Krass, Ines

2016-06-01

Background In the field of pharmacist intervention research it is often difficult to conform to the rigorous requirements of the "true experimental" models, especially the requirement of randomization. When randomization is not feasible, a practice based researcher can choose from a range of "quasi-experimental designs" i.e., non-randomised and at time non controlled. Objective The aim of this article was to provide an overview of quasi-experimental designs, discuss their strengths and weaknesses and to investigate their application in pharmacist intervention research over the previous decade. Results In the literature quasi experimental studies may be classified into five broad categories: quasi-experimental design without control groups; quasi-experimental design that use control groups with no pre-test; quasi-experimental design that use control groups and pre-tests; interrupted time series and stepped wedge designs. Quasi-experimental study design has consistently featured in the evolution of pharmacist intervention research. The most commonly applied of all quasi experimental designs in the practice based research literature are the one group pre-post-test design and the non-equivalent control group design i.e., (untreated control group with dependent pre-tests and post-tests) and have been used to test the impact of pharmacist interventions in general medications management as well as in specific disease states. Conclusion Quasi experimental studies have a role to play as proof of concept, in the pilot phases of interventions when testing different intervention components, especially in complex interventions. They serve to develop an understanding of possible intervention effects: while in isolation they yield weak evidence of clinical efficacy, taken collectively, they help build a body of evidence in support of the value of pharmacist interventions across different practice settings and countries. However, when a traditional RCT is not feasible for

Building online brand perceptual map.

Science.gov (United States)

Chiang, I-Ping; Lin, Chih-Ying; Wang, Kaisheng M

2008-10-01

Many companies have launched their products or services online as a new business focus, but only a few of them have survived the competition and made profits. The most important key to an online business's success is to create "brand value" for the customers. Although the concept of online brand has been discussed in previous studies, there is no empirical study on the measurement of online branding. As Web 2.0 emerges to be critical to online branding, the purpose of this study was to measure Taiwan's major Web sites with a number of personality traits to build a perceptual map for online brands. A pretest identified 10 most representative online brand perceptions. The results of the correspondence analysis showed five groups in the perceptual map. This study provided a practical view of the associations and similarities among online brands for potential alliance or branding strategies. The findings also suggested that brand perceptions can be used with identified consumer needs and behaviors to better position online services. The brand perception map in the study also contributed to a better understanding of the online brands in Taiwan.