WorldWideScience

Sample records for on-line costate integration

  1. Costate estimation for dynamic systems of the second order

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The dynamics of a mechanical system in the Lagrange space yields a set of differential equations of the second order and involves much less variables and constraints than that described in the state space. This paper presents a so-called Legendre pseudo-spectral (PS) approach for directly estimating the costates of the Bolza problem of optimal control of a set of dynamic equations of the second order. Under a set of closure conditions, it is proved that the Karush-Kuhn-Tucker (KKT) multipliers satisfy the same conditions as those determined by collocating the costate equations of the second order. Hence, the KKT multipliers can be used to estimate the costates of the Bolza problem via a simple linear map- ping. The proposed approach can be used to check the optimality of the direct solution for a trajectory optimization problem involving the dynamic equations of the second order and to remove any conver- sion of the dynamic system from the second order to the first order. The new approach is demonstrated via two classical benchmark problems.

  2. Costate estimation for dynamic systems of the second order

    Institute of Scientific and Technical Information of China (English)

    WEN Hao; JIN DongPing; HU HaiYan

    2009-01-01

    The dynamics of a mechanical system in the Lagrange space yields a set of differential equations of the second order and involves much less variables and constraints than that described in the state space. This paper presents a so-called Legendre pseudo-spectral (PS) approach for directly estimating the costates of the Bolza problem of optimal control of a set of dynamic equations of the second order. Under a set of closure conditions, it is proved that the Karush-Kuhn-Tucker (KKT) multipliers satisfy the same conditions as those determined by collocating the costate equations of the second order. Hence, the KKT multipliers can be used to estimate the costates of the Bolza problem via a simple linear mapping. The proposed approach can be used to check the optimality of the direct solution for a trajectory optimization problem involving the dynamic equations of the second order and to remove any conversion of the dynamic system from the second order to the first order. The new approach is demonstrated via two classical benchmark problems.

  3. Integrated sensor array for on-line monitoring micro bioreactors

    NARCIS (Netherlands)

    Krommenhoek, Erik Eduard

    2007-01-01

    In this thesis the development of a microbioreactor array with integrated sensoss suitable for on-line screening of micro organisms is described. Therefore, an array of 2 micro bioreactors compatible with the 96-well microtiterplate format has been made and tested. The developed system was shown to 

  4. Costate Estimation of PMP-Based Control Strategy for PHEV Using Legendre Pseudospectral Method

    Directory of Open Access Journals (Sweden)

    Hanbing Wei

    2016-01-01

    Full Text Available Costate value plays a significant role in the application of PMP-based control strategy for PHEV. It is critical for terminal SOC of battery at destination and corresponding equivalent fuel consumption. However, it is not convenient to choose the approximate costate in real driving condition. In the paper, the optimal control problem of PHEV based on PMP has been converted to nonlinear programming problem. By means of KKT condition costate can be approximated as KKT multipliers of NLP divided by the LGL weights. A kind of general costate estimation approach is proposed for predefined driving condition in this way. Dynamic model has been established in Matlab/Simulink in order to prove the effectiveness of the method. Simulation results demonstrate that the method presented in the paper can deduce the closer value of global optimal value than constant initial costate value. This approach can be used for initial costate and jump condition estimation of PMP-based control strategy for PHEV.

  5. On-line quizzes to evaluate comprehension and integration skills

    Directory of Open Access Journals (Sweden)

    José David Badia Valiente

    2016-06-01

    Full Text Available This work demonstrates the use of a 2.0 tool, namely, Socrative, to evaluate one of the cross-curricular competences indicated by the Universitat Politècnica de València, specifically, comprehension and integration. It has been applied to the courses in different areas: sciences, engineering and languages. As part of its implementation, activities were proposed that could be done at the beginning, during or at the end of the class to, on the one hand, help students acquire the knowledge associated with the course(s, and on the other, gather evidence that demonstrates acquisition of said competence. The results show a high level of satisfaction by the students with the use of the Socrative tool as an element to promote active participation and the acquisition of the cross-curricular competence of comprehension and integration; therefore, its extension to other courses has been suggested.

  6. Planning an Integrated On-Line Library system (IOLS)

    Science.gov (United States)

    1989-03-01

    Information Technolo2gy and the Academi11c Librarv," Library Journal 109 (June 1. 1984):1204-1209. 15. Karen L. l-orniv, "Fifteen Years of Automation...Richard. "Integrated Online Library Systems: Perspectives, Percep- tions, & Practicalities." Library Journal 110 (February 1, 1985):37-40. De Gennaro...Richard. "Library Automation & Networking Perspectives on Three Decades." Library Journal 108 (1 April 1983):629-35. De Gennaro, Richard. "Shifting

  7. INTEGRATION OF STORAGE CHARACTERISTIC WITH ON-LINE SERVICE CHARACTERISTIC OF AS/RS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Directed at how to integrated storage characteristic with on-line service characteristic of AS/RS, a solution based on database design and programming method is proposed. The results show that this model is reasonable and applicable while using in some small or middle enterprises material handling system.

  8. The Decoration Operator: A Foundation for On-Line Dimensional Data Integration

    DEFF Research Database (Denmark)

    Pedersen, Dennis; Pedersen, Torben Bach; Riis, Karsten

    2004-01-01

    The changing data requirements of today's dynamic business environments are not handled well by current On-Line Analytical Processing (OLAP) systems. Physically integrating unexpected, external data into OLAP cubes, i.e., the data warehousing approach, is a long and time-consuming process, making...

  9. On Line Service Composition in the Integrated Clinical Environment for eHealth and Medical Systems.

    Science.gov (United States)

    García-Valls, Marisol; Touahria, Imad Eddine

    2017-06-08

    Medical and eHealth systems are progressively realized in the context of standardized architectures that support safety and ease the integration of the heterogeneous (and often proprietary) medical devices and sensors. The Integrated Clinical Environment (ICE) architecture appeared recently with the goal of becoming a common framework for defining the structure of the medical applications as concerns the safe integration of medical devices and sensors. ICE is simply a high level architecture that defines the functional blocks that should be part of a medical system to support interoperability. As a result, the underlying communication backbone is broadly undefined as concerns the enabling software technology (including the middleware) and associated algorithms that meet the ICE requirements of the flexible integration of medical devices and services. Supporting the on line composition of services in a medical system is also not part of ICE; however, supporting this behavior would enable flexible orchestration of functions (e.g., addition and/or removal of services and medical equipment) on the fly. iLandis one of the few software technologies that supports on line service composition and reconfiguration, ensuring time-bounded transitions across different service orchestrations; it supports the design, deployment and on line reconfiguration of applications, which this paper applies to service-based eHealth domains. This paper designs the integration between ICE architecture and iLand middleware to enhance the capabilities of ICE with on line service composition and the time-bounded reconfiguration of medical systems based on distributed services. A prototype implementation of a service-based eHealth system for the remote monitoring of patients is described; it validates the enhanced capacity of ICE to support dynamic reconfiguration of the application services. Results show that the temporal cost of the on line reconfiguration of the eHealth application is bounded

  10. Dielectrophoresis microsystem with integrated flow cytometers for on-line monitoring of sorting efficiency

    DEFF Research Database (Denmark)

    Wang, Zhenyu; Hansen, Ole; Petersen, Peter Kalsen

    2006-01-01

    Dielectrophoresis (DEP) and flow cytometry are powerful technologies and widely applied in microfluidic systems for handling and measuring cells and particles. Here, we present a novel microchip with a DEP selective filter integrated with two microchip flow cytometers (FCs) for on-line monitoring...... of cell sorting processes. On the microchip, the DEP filter is integrated in a microfluidic channel network to sort yeast cells by positive DER The two FCs detection windows are set upstream and downstream of the DEP filter. When a cell passes through the detection windows, the light scattered by the cell...

  11. An integrated on-line irradiation and in situ live cell imaging system

    Science.gov (United States)

    Liang, Ying; Fu, Qibin; Wang, Weikang; Liu, Yu; Liu, Feng; Yang, Gen; Wang, Yugang

    2015-09-01

    Ionizing radiation poses a threat to genome integrity by introducing DNA damages, particularly DNA double-strand breaks (DSB) in cells. Understanding how cells react to DSB and maintain genome integrity is of major importance, since increasing evidences indicate the links of DSB with genome instability and cancer predispositions. However, tracking the dynamics of DNA damages and repair response to ionizing radiation in individual cell is difficult. Here we describe the development of an on-line irradiation and in situ live cell imaging system based on isotopic sources at Institute of Heavy Ion Physics, Peking University. The system was designed to irradiate cells and in situ observe the cellular responses to ionizing radiation in real time. On-line irradiation was achieved by mounting a metal framework that hold an isotopic γ source above the cell culture dish for γ irradiation; or by integrating an isotopic α source to an objective lens under the specialized cell culture dish for α irradiation. Live cell imaging was performed on a confocal microscope with an environmental chamber installed on the microscope stage. Culture conditions in the environment chamber such as CO2, O2 concentration as well as temperature are adjustable, which further extends the capacity of the system and allows more flexible experimental design. We demonstrate the use of this system by tracking the DSB foci formation and disappearance in individual cells after exposure to irradiation. On-line irradiation together with in situ live cell imaging in adjustable culture conditions, the system overall provides a powerful tool for investigation of cellular and subcellular response to ionizing radiation under different physiological conditions such as hyperthermia or hypoxia.

  12. An integrated on-line irradiation and in situ live cell imaging system

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Ying; Fu, Qibin; Wang, Weikang; Liu, Yu; Liu, Feng; Yang, Gen, E-mail: gen.yang@pku.edu.cn; Wang, Yugang

    2015-09-01

    Ionizing radiation poses a threat to genome integrity by introducing DNA damages, particularly DNA double-strand breaks (DSB) in cells. Understanding how cells react to DSB and maintain genome integrity is of major importance, since increasing evidences indicate the links of DSB with genome instability and cancer predispositions. However, tracking the dynamics of DNA damages and repair response to ionizing radiation in individual cell is difficult. Here we describe the development of an on-line irradiation and in situ live cell imaging system based on isotopic sources at Institute of Heavy Ion Physics, Peking University. The system was designed to irradiate cells and in situ observe the cellular responses to ionizing radiation in real time. On-line irradiation was achieved by mounting a metal framework that hold an isotopic γ source above the cell culture dish for γ irradiation; or by integrating an isotopic α source to an objective lens under the specialized cell culture dish for α irradiation. Live cell imaging was performed on a confocal microscope with an environmental chamber installed on the microscope stage. Culture conditions in the environment chamber such as CO{sub 2}, O{sub 2} concentration as well as temperature are adjustable, which further extends the capacity of the system and allows more flexible experimental design. We demonstrate the use of this system by tracking the DSB foci formation and disappearance in individual cells after exposure to irradiation. On-line irradiation together with in situ live cell imaging in adjustable culture conditions, the system overall provides a powerful tool for investigation of cellular and subcellular response to ionizing radiation under different physiological conditions such as hyperthermia or hypoxia.

  13. Integrated Health Monitoring and Fast on-Line Actuator Reconfiguration Enhancement (IHM-FLARE) System for Air Vehicles Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI proposes to develop innovative algorithms for the integration of Health Monitoring (HM) subsystem with the existing FLARE (Fast on-Line Actuator Reconfiguration...

  14. Integrating Multiple On-line Knowledge Bases for Disease-Lab Test Relation Extraction

    Science.gov (United States)

    Zhang, Yaoyun; Soysal, Ergin; Moon, Sungrim; Wang, Jingqi; Tao, Cui; Xu, Hua

    2015-01-01

    A computable knowledge base containing relations between diseases and lab tests would be a great resource for many biomedical informatics applications. This paper describes our initial step towards establishing a comprehensive knowledge base of disease and lab tests relations utilizing three public on-line resources. LabTestsOnline, MedlinePlus and Wikipedia are integrated to create a freely available, computable disease-lab test knowledgebase. Disease and lab test concepts are identified using MetaMap and relations between diseases and lab tests are determined based on source-specific rules. Experimental results demonstrate a high precision for relation extraction, with Wikipedia achieving the highest precision of 87%. Combining the three sources reached a recall of 51.40%, when compared with a subset of disease-lab test relations extracted from a reference book. Moreover, we found additional disease-lab test relations from on-line resources, indicating they are complementary to existing reference books for building a comprehensive disease and lab test relation knowledge base. PMID:26306271

  15. On-line monitoring of control rod integrity in BWRs using a mass spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, I., E-mail: irina@nephy.chalmers.se [Chalmers University of Technology, SE-412 96 Gothenburg (Sweden); Loner, H.; Ammon, K. [Kernkraftwerk Leibstadt, CH-5325 Leibstadt (Switzerland); Sihver, L. [Chalmers University of Technology, SE-412 96 Gothenburg (Sweden); Ledergerber, G. [Kernkraftwerk Leibstadt, CH-5325 Leibstadt (Switzerland)

    2013-01-11

    Surveillance of fuel and control rod integrity in the core of a boiling water reactor is essential for maintaining a safe and reliable operation. Control rods of a boiling water reactor are mainly filled with boron carbide as a neutron absorber. Due to the irradiation of boron with neutrons, a continuous production of lithium and helium will occur inside a control rod. Most of the created helium will be retained in the boron carbide lattice; however a small part will escape into the void volume of the control blade. Therefore the integrity of control rods during operation can efficiently be followed by on-line measurements of helium concentration in the reactor off-gas system using a mass spectrometer. Since helium is a fill gas in fuel rods, the same method is a useful early warning system for primary fuel failures. In this paper, we introduce an on-line helium detector system which is installed at the nuclear power plant in Leibstadt. Furthermore the measuring experiences of control rod failure detection at the plant are presented. Different causes of increased helium levels in the off-gas system have been distinguished. There are spontaneous helium releases as well as helium releases caused by changed conditions in the reactor (power reduction, control rod movement, etc.). Helium peaks can also be characterized according to the released amount of helium, the peak shape and the duration of the release, which leads to different interpretations of the release mechanisms. In addition, the measured amount of released helium from a 50 days period (280 l) is also compared to the calculated amount of produced helium from the washed out boron during the same time period (190 l).

  16. On-line monitoring of control rod integrity in BWRs using a mass spectrometer

    Science.gov (United States)

    Larsson, I.; Loner, H.; Ammon, K.; Sihver, L.; Ledergerber, G.

    2013-01-01

    Surveillance of fuel and control rod integrity in the core of a boiling water reactor is essential for maintaining a safe and reliable operation. Control rods of a boiling water reactor are mainly filled with boron carbide as a neutron absorber. Due to the irradiation of boron with neutrons, a continuous production of lithium and helium will occur inside a control rod. Most of the created helium will be retained in the boron carbide lattice; however a small part will escape into the void volume of the control blade. Therefore the integrity of control rods during operation can efficiently be followed by on-line measurements of helium concentration in the reactor off-gas system using a mass spectrometer. Since helium is a fill gas in fuel rods, the same method is a useful early warning system for primary fuel failures. In this paper, we introduce an on-line helium detector system which is installed at the nuclear power plant in Leibstadt. Furthermore the measuring experiences of control rod failure detection at the plant are presented. Different causes of increased helium levels in the off-gas system have been distinguished. There are spontaneous helium releases as well as helium releases caused by changed conditions in the reactor (power reduction, control rod movement, etc.). Helium peaks can also be characterized according to the released amount of helium, the peak shape and the duration of the release, which leads to different interpretations of the release mechanisms. In addition, the measured amount of released helium from a 50 days period (280 l) is also compared to the calculated amount of produced helium from the washed out boron during the same time period (190 l).

  17. On-Line Smoothing for an Integrated Navigation System with Low-Cost MEMS Inertial Sensors

    Directory of Open Access Journals (Sweden)

    Shih-Ching Huang

    2012-12-01

    Full Text Available The integration of the Inertial Navigation System (INS and the Global Positioning System (GPS is widely applied to seamlessly determine the time-variable position and orientation parameters of a system for navigation and mobile mapping applications. For optimal data fusion, the Kalman filter (KF is often used for real-time applications. Backward smoothing is considered an optimal post-processing procedure. However, in current INS/GPS integration schemes, the KF and smoothing techniques still have some limitations. This article reviews the principles and analyzes the limitations of these estimators. In addition, an on-line smoothing method that overcomes the limitations of previous algorithms is proposed. For verification, an INS/GPS integrated architecture is implemented using a low-cost micro-electro-mechanical systems inertial measurement unit and a single-frequency GPS receiver. GPS signal outages are included in the testing trajectories to evaluate the effectiveness of the proposed method in comparison to conventional schemes.

  18. On-line Scanned Probe Microscopy Transparently Integrated with DualBeam SEM/FIB Systems

    Science.gov (United States)

    Ignatov, Andrey; Komissar, Anatoly; Lewis, Aaron

    2013-03-01

    A multifunctional scanning probe microscope (SPM) will be described that transparently integrates with a DualBeam SEM/FIB System. This is done without perturbing any of the capabilities of the Dual Beam in terms of detectors, gas injectors, analyzers etc while allowing for a completely exposed probe tip to be imaged online even with immersion objectives at working distances as short as 4 mm. In addition, the completely free motion of the rotation axis of the stage is maintained with the probe tip at the eucentric point, this makes it possible to orient the sample in any direction on any structure The X and Y scan range of the atomic force microscopic (AFM) imaging achieves 35 microns with rough motion over 10 millimeters. This permits the SPM to tilt into position perpendicular to the SEM or FIB or under an angle for rapid and accurate placement of the probe tip at or on structures such as biopolymeric materials that are nanometric in X, Y and Z extent. Thus, not only can a structure's nanometric height be accurately profiled but this can be accomplished with the on-line excellence of SEM for X, Y metrology. Furthermore, electron and ion beam sensitive samples can be imaged and characterized by AFM at high resolution.

  19. On-line fuel and control rod integrity surveillance in BWRs

    Energy Technology Data Exchange (ETDEWEB)

    Sihver, L.; Larsson, I. [CHalmers Univ. of Technology, Nuclear Engineering, Gothenberg (Sweden); Loner, H. [Kernkraftwerk Leibstadt, Leibstadt (Switzerland); Grundin, A.; Helmersson, J-O.; Ledergerber, G. [Forsmarks Kraftgrupp AB, Osthammar (Sweden)

    2013-07-01

    Surveillance of fuel and control rod integrity in a BWR core is essential to maintain a safe and reliable operation of the nuclear power plant. Any actions to be taken in the event of a fuel failure during reactor operation should be based on the best available information regarding the failure and expected consequences. The detection of fuel and control rod failures in BWRs is usually performed by analyzing samples of off-gases and coolant taken with a certain time intervals, e.g. once a week or once a month. This procedure can, however, leave the failure undetected in the core for quite some time. Therefore, a sufficient improvement of the surveillance of fuel and control rods can be achieved by simultaneous measurements of He and gamma emitting noble gases on-line in the off gas system. In this paper, experiences of such measurements performed at Kernkraftwerk Leibstadt (KKL) in Switzerland and Forsmark nuclear power plant (NPP) in Sweden will be presented. (author)

  20. On-line Meteorology-Chemistry/Aerosols Modelling and Integration for Risk Assessment: Case Studies

    Science.gov (United States)

    Bostanbekov, Kairat; Mahura, Alexander; Nuterman, Roman; Nurseitov, Daniyar; Zakarin, Edige; Baklanov, Alexander

    2016-04-01

    On regional level, and especially in areas with potential diverse sources of industrial pollutants, the risk assessment of impact on environment and population is critically important. During normal operations, the risk is minimal. However, during accidental situations, the risk is increased due to releases of harmful pollutants into different environments such as water, soil, and atmosphere where it is following processes of continuous transformation and transport. In this study, the Enviro-HIRLAM (Environment High Resolution Limited Area Model) was adapted and employed for assessment of scenarios with accidental and continuous emissions of sulphur dioxide (SO2) for selected case studies during January of 2010. The following scenarios were considered: (i) control reference run; (ii) accidental release (due to short-term 1 day fire at oil storage facility) occurred at city of Atyrau (Kazakhstan) near the northern part of the Caspian Sea; and (iii) doubling of original continuous emissions from three locations of metallurgical enterprises on the Kola Peninsula (Russia). The implemented aerosol microphysics module M7 uses 5 types - sulphates, sea salt, dust, black and organic carbon; as well as distributed in 7 size modes. Removal processes of aerosols include gravitational settling and wet deposition. As the Enviro-HIRLAM model is the on-line integrated model, both meteorological and chemical processes are simultaneously modelled at each time step. The modelled spatio-temporal variations for meteorological and chemical patterns are analyzed for both European and Kazakhstan regions domains. The results of evaluation of sulphur dioxide concentration and deposition on main populated cities, selected regions, countries are presented employing GIS tools. As outcome, the results of Enviro-HIRLAM modelling for accidental release near the Caspian Sea are integrated into the RANDOM (Risk Assessment of Nature Detriment due to Oil spill Migration) system.

  1. Integrated electrochemical sensor array for on-line monitoring of yeast fermentations

    NARCIS (Netherlands)

    Krommenhoek, E.E.; Gardeniers, Johannes G.E.; Bomer, Johan G.; Li, X.; Ottens, M.; van Dedem, G.W.K.; van Leeuwen, M.; van Gulik, W.M.; van der Wielen, L.A.M.; Heijnen, J.J.; van den Berg, Albert

    2007-01-01

    This paper describes the design, modeling, and experimental characterization of an electrochemical sensor array for on-line monitoring of fermentor conditions in both miniaturized cell assays and in industrial scale fertnentations. The viable biomass concentration is determined from impedance

  2. An automated on-line multidimensional HPLC system for protein and peptide mapping with integrated sample preparation

    NARCIS (Netherlands)

    Wagner, K.; Miliotis, T.; Marko-Varga, G; Bischoff, Rainer; Unger, K.K.

    2002-01-01

    A comprehensive on-line two-dimensional 2D-HPLC system with integrated sample preparation was developed for the analysis of proteins and peptides with a molecular weight below 20 kDa. The system setup provided fast separations and high resolving power and is considered to be a complementary techniqu

  3. Metrological Characterization of an Improved DSP-Based On-line Integrator for Magnetic Measurements at CERN

    CERN Document Server

    Arpaia, P; Spiezia, G

    2007-01-01

    An improved on-line version of the self-calibrating digital instrument for flux measurements on superconductive magnets for particle accelerators, prototyped at the European Organization for Nuclear Research (CERN) in cooperation with the University of Sannio, is proposed. The instrument acquires voltage arising from rotating coils transducers. Then, the samples are online integrated and suitably processed in order to achieve flux analysis time down to 2.0 ìs, with resolution of 50 ns. Details about hardware and firmware conception, on-line measurement principle, and preliminary results of metrological characterization of the prototype are provided.

  4. On line and double integrals in the non-Newtonian sense

    Science.gov (United States)

    ćakmak, Ahmet Faruk; Başar, Feyzi

    2014-08-01

    This paper is devoted to line and double integrals in the sense of non-Newtonian calculus (*-calculus). Moreover, in the sense of *-calculus, the fundamental theorem of calculus for line integrals and double integrals are stated and proved, and some applications are presented.

  5. Autonomous Integrated Navigation for Indoor Robots Utilizing On-Line Iterated Extended Rauch-Tung-Striebel Smoothing

    Science.gov (United States)

    Xu, Yuan; Chen, Xiyuan; Li, Qinghua

    2013-01-01

    In order to reduce the estimated errors of the inertial navigation system (INS)/Wireless sensor network (WSN)-integrated navigation for mobile robots indoors, this work proposes an on-line iterated extended Rauch-Tung-Striebel smoothing (IERTSS) utilizing inertial measuring units (IMUs) and an ultrasonic positioning system. In this mode, an iterated Extended Kalman filter (IEKF) is used in forward data processing of the Extended Rauch-Tung-Striebel smoothing (ERTSS) to improve the accuracy of the filtering output for the smoother. Furthermore, in order to achieve the on-line smoothing, IERTSS is embedded into the average filter. For verification, a real indoor test has been done to assess the performance of the proposed method. The results show that the proposed method is effective in reducing the errors compared with the conventional schemes.

  6. Autonomous Integrated Navigation for Indoor Robots Utilizing On-Line Iterated Extended Rauch-Tung-Striebel Smoothing

    Directory of Open Access Journals (Sweden)

    Yuan Xu

    2013-11-01

    Full Text Available In order to reduce the estimated errors of the inertial navigation system (INS/Wireless sensor network (WSN-integrated navigation for mobile robots indoors, this work proposes an on-line iterated extended Rauch-Tung-Striebel smoothing (IERTSS utilizing inertial measuring units (IMUs and an ultrasonic positioning system. In this mode, an iterated Extended Kalman filter (IEKF is used in forward data processing of the Extended Rauch-Tung-Striebel smoothing (ERTSS to improve the accuracy of the filtering output for the smoother. Furthermore, in order to achieve the on-line smoothing, IERTSS is embedded into the average filter. For verification, a real indoor test has been done to assess the performance of the proposed method. The results show that the proposed method is effective in reducing the errors compared with the conventional schemes.

  7. Multi-sensor integration for on-line tool wear estimation through radial basis function networks and fuzzy neural network.

    Science.gov (United States)

    Kuo, R J.; Cohen, P H.

    1999-03-01

    On-line tool wear estimation plays a very critical role in industry automation for higher productivity and product quality. In addition, appropriate and timely decision for tool change is significantly required in the machining systems. Thus, this paper is dedicated to develop an estimation system through integration of two promising technologies, artificial neural networks (ANN) and fuzzy logic. An on-line estimation system consisting of five components: (1) data collection; (2) feature extraction; (3) pattern recognition; (4) multi-sensor integration; and (5) tool/work distance compensation for tool flank wear, is proposed herein. For each sensor, a radial basis function (RBF) network is employed to recognize the extracted features. Thereafter, the decisions from multiple sensors are integrated through a proposed fuzzy neural network (FNN) model. Such a model is self-organizing and self-adjusting, and is able to learn from the experience. Physical experiments for the metal cutting process are implemented to evaluate the proposed system. The results show that the proposed system can significantly increase the accuracy of the product profile.

  8. Automation and integration of multiplexed on-line sample preparation with capillary electrophoresis for DNA sequencing

    Energy Technology Data Exchange (ETDEWEB)

    Tan, H.

    1999-03-31

    The purpose of this research is to develop a multiplexed sample processing system in conjunction with multiplexed capillary electrophoresis for high-throughput DNA sequencing. The concept from DNA template to called bases was first demonstrated with a manually operated single capillary system. Later, an automated microfluidic system with 8 channels based on the same principle was successfully constructed. The instrument automatically processes 8 templates through reaction, purification, denaturation, pre-concentration, injection, separation and detection in a parallel fashion. A multiplexed freeze/thaw switching principle and a distribution network were implemented to manage flow direction and sample transportation. Dye-labeled terminator cycle-sequencing reactions are performed in an 8-capillary array in a hot air thermal cycler. Subsequently, the sequencing ladders are directly loaded into a corresponding size-exclusion chromatographic column operated at {approximately} 60 C for purification. On-line denaturation and stacking injection for capillary electrophoresis is simultaneously accomplished at a cross assembly set at {approximately} 70 C. Not only the separation capillary array but also the reaction capillary array and purification columns can be regenerated after every run. DNA sequencing data from this system allow base calling up to 460 bases with accuracy of 98%.

  9. Sensor integritY Management and Prognostics Technology with On-line fault Mitigation (SYMPTOM) for Improved Flight Safety of Commercial Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI proposes to develop and test the Sensor integritY Management and Prognostics Technology with On-line fault Mitigation (SYMPTOM) system. The SYMPTOM assures...

  10. On-line integration of computer controlled diagnostic devices and medical information systems in undergraduate medical physics education for physicians.

    Science.gov (United States)

    Hanus, Josef; Nosek, Tomas; Zahora, Jiri; Bezrouk, Ales; Masin, Vladimir

    2013-01-01

    We designed and evaluated an innovative computer-aided-learning environment based on the on-line integration of computer controlled medical diagnostic devices and a medical information system for use in the preclinical medical physics education of medical students. Our learning system simulates the actual clinical environment in a hospital or primary care unit. It uses a commercial medical information system for on-line storage and processing of clinical type data acquired during physics laboratory classes. Every student adopts two roles, the role of 'patient' and the role of 'physician'. As a 'physician' the student operates the medical devices to clinically assess 'patient' colleagues and records all results in an electronic 'patient' record. We also introduced an innovative approach to the use of supportive education materials, based on the methods of adaptive e-learning. A survey of student feedback is included and statistically evaluated. The results from the student feedback confirm the positive response of the latter to this novel implementation of medical physics and informatics in preclinical education. This approach not only significantly improves learning of medical physics and informatics skills but has the added advantage that it facilitates students' transition from preclinical to clinical subjects.

  11. Micro flow reactor chips with integrated luminescent chemosensors for spatially resolved on-line chemical reaction monitoring.

    Science.gov (United States)

    Gitlin, Leonid; Hoera, Christian; Meier, Robert J; Nagl, Stefan; Belder, Detlev

    2013-10-21

    Real-time chemical reaction monitoring in microfluidic environments is demonstrated using luminescent chemical sensors integrated in PDMS/glass-based microscale reactors. A fabrication procedure is presented that allows for straightforward integration of thin polymer layers with optical sensing functionality in microchannels of glass-PDMS chips of only 150 μm width and of 10 to 35 μm height. Sensor layers consisting of polystyrene and an oxygen-sensitive platinum porphyrin probe with film thicknesses of about 0.5 to 4 μm were generated by combining spin coating and abrasion techniques. Optimal coating procedures were developed and evaluated. The chip-integrated sensor layers were calibrated and investigated with respect to stability, reproducibility and response times. These microchips allowed observation of dissolved oxygen concentration in the range of 0 to over 40 mg L(-1) with a detection limit of 368 μg L(-1). The sensor layers were then used for observation of a model reaction, the oxidation of sulphite to sulphate in a microfluidic chemical reactor and could observe sulphite concentrations of less than 200 μM. Real-time on-line monitoring of this chemical reaction was realized at a fluorescence microscope setup with 405 nm LED excitation and CCD camera detection.

  12. On-Line Monitoring and Diagnostics of the Integrity of Nuclear Plant Steam Generators and Heat Exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Belle R. Upadhyaya; J. Wesley Hines

    2004-09-27

    Integrity monitoring and flaw diagnostics of flat beams and tubular structures was investigated in this research task using guided acoustic signals. A piezo-sensor suite was deployed to activate and collect Lamb wave signals that propagate along metallic specimens. The dispersion curves of Lamb waves along plate and tubular structures are generated through numerical analysis. Several advanced techniques were explored to extract representative features from acoustic time series. Among them, the Hilbert-Huang transform (HHT) is a recently developed technique for the analysis of non-linear and transient signals. A moving window method was introduced to generate the local peak characters from acoustic time series, and a zooming window technique was developed to localize the structural flaws. The time-frequency analysis and pattern recognition techniques were combined for classifying structural defects in brass tubes. Several types of flaws in brass tubes were tested, both in the air and in water. The techniques also proved to be effective under background/process noise. A detailed theoretical analysis of Lamb wave propagation was performed and simulations were carried out using the finite element software system ABAQUS. This analytical study confirmed the behavior of the acoustic signals acquired from the experimental studies. The report presents the background the analysis of acoustic signals acquired from piezo-electric transducers for structural defect monitoring. A comparison of the use of time-frequency techniques, including the Hilbert-Huang transform, is presented. The report presents the theoretical study of Lamb wave propagation in flat beams and tubular structures, and the need for mode separation in order to effectively perform defect diagnosis. The results of an extensive experimental study of detection, location, and isolation of structural defects in flat aluminum beams and brass tubes are presented. The results of this research show the feasibility of on-line

  13. On-line structural integrity monitoring and defect diagnosis of steam generators using analysis of guided acoustic waves

    Science.gov (United States)

    Lu, Baofu

    2005-11-01

    confirmed the behavior of the acoustic signals acquired from the experimental studies. The results of this research showed the feasibility of on-line detection of small structural flaws by the use of transient and nonlinear acoustic signal analysis, and its implementation by the proper design of a piezo-electric transducer suite. The techniques developed in this research would be applicable to civil structures and aerospace structures.

  14. On-line monitoring system of lactic acid fermentation by using integrated enzyme sons ors; Shusekika koso sensa wo mochiita nyusan hakko keisokuyo onrain monitaringu shisutemu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Masayasu; Kumagi, Takeshi; Nakashima, Yuuichi [Kyushu University, Fukuoka (Japan). Dept. of Biochemical Engineering and Science

    1999-03-10

    An on-line monitoring system for lactic acid fermentation is developed by using integrated micro enzyme sensors, a flow injection analysis system, and a micro dialysis system. The calibration curves of micro glucose, lactose and lactate sensors show good linearity in the concentration range below 70 mM. By combination with the micro dialysis system, the enzyme sensors can measure the whole concentration range of lactic acid fermentation, and interference by the medium can not be observed. The on-line sensor system is then applied to lactic acid fermentation of Lactobacillus delbrueckii. The sensor system can monitor the glucose and lactate concentrations simultaneously during 24-h fermentation, and the measurements show good agreement with those of the conventional colorimetric method. The sensor system can also be applied to on-line monitoring of lactose and lactate during Lactobacillus lactis fermentation. (author)

  15. The activity-integrated method for quality assessment of reduning injection by on-line DPPH-CE-DAD.

    Science.gov (United States)

    Chang, Yan-xu; Liu, Jiao; Bai, Yang; Li, Jin; Liu, Er-wei; He, Jun; Jiao, Xiu-cheng; Wang, Zhen-zhong; Gao, Xiu-Mei; Zhang, Bo-li; Xiao, Wei

    2014-01-01

    A sensitive on-line DPPH-CE-DAD method was developed and validated for both screening and determining the concentration of seven antioxidants of Reduning injection. The pH and concentrations of buffer solution, SDS, β-CD and organic modifier were studied for the detection of DPPH and seven antioxidants. By on-line mixing DPPH and sample solution, a DPPH-CE method for testing the antioxidant activity of the complex matrix was successfully established and used to screen the antioxidant components of Reduning injection. Then, antioxidant components including caffeic acid, isochlorogenic acid A, isochlorogenic acid B, isochlorogenic acid C, chlorogenic acid, neochlorogenic acid and cryptochlorogenic acid were quantified by the newly established CE-DAD method. Finally, the total antioxidant activity and the multiple active components were selected as markers to evaluate the quality of Reduning injection. The results demonstrated that the on-line DPPH-CE-DAD method was reagent-saving, rapid and feasible for on-line simultaneous determination of total pharmacological activity and contents of multi-components samples. It was also a powerful method for evaluating the quality control and mechanism of action of TCM injection.

  16. The activity-integrated method for quality assessment of reduning injection by on-line DPPH-CE-DAD.

    Directory of Open Access Journals (Sweden)

    Yan-xu Chang

    Full Text Available A sensitive on-line DPPH-CE-DAD method was developed and validated for both screening and determining the concentration of seven antioxidants of Reduning injection. The pH and concentrations of buffer solution, SDS, β-CD and organic modifier were studied for the detection of DPPH and seven antioxidants. By on-line mixing DPPH and sample solution, a DPPH-CE method for testing the antioxidant activity of the complex matrix was successfully established and used to screen the antioxidant components of Reduning injection. Then, antioxidant components including caffeic acid, isochlorogenic acid A, isochlorogenic acid B, isochlorogenic acid C, chlorogenic acid, neochlorogenic acid and cryptochlorogenic acid were quantified by the newly established CE-DAD method. Finally, the total antioxidant activity and the multiple active components were selected as markers to evaluate the quality of Reduning injection. The results demonstrated that the on-line DPPH-CE-DAD method was reagent-saving, rapid and feasible for on-line simultaneous determination of total pharmacological activity and contents of multi-components samples. It was also a powerful method for evaluating the quality control and mechanism of action of TCM injection.

  17. Developing a Curriculum for On-Line International Business Degree: An Integrated Approach Using Systems and ERP Concepts

    Science.gov (United States)

    Desai, Mayur S.; Pitre, Richard

    2009-01-01

    The world today can be characterized by constant change. One such change is globalization: the integration of world economies into a single economy. Because of globalization, it is necessary for colleges and universities to respond with appropriate curriculum changes that addresses this new world phenomenon. Several institutions of higher…

  18. Developing a Curriculum for On-Line International Business Degree: An Integrated Approach Using Systems and ERP Concepts

    Science.gov (United States)

    Desai, Mayur S.; Pitre, Richard

    2009-01-01

    The world today can be characterized by constant change. One such change is globalization: the integration of world economies into a single economy. Because of globalization, it is necessary for colleges and universities to respond with appropriate curriculum changes that addresses this new world phenomenon. Several institutions of higher…

  19. On-Line Monitoring and Diagnostics of the Integrity of Nuclear Plant Steam Generators and Heat Exchangers, Volumes 1, 2

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyaya, Belle R. [Univ. of Tennessee, Knoxville, TN (United States); Hines, J. Wesley [Univ. of Tennessee, Knoxville, TN (United States); Lu, Baofu [Univ. of Tennessee, Knoxville, TN (United States)

    2005-06-03

    The overall purpose of this Nuclear Engineering Education Research (NEER) project was to integrate new, innovative, and existing technologies to develop a fault diagnostics and characterization system for nuclear plant steam generators (SG) and heat exchangers (HX). Issues related to system level degradation of SG and HX tubing, including tube fouling, performance under reduced heat transfer area, and the damage caused by stress corrosion cracking, are the important factors that influence overall plant operation, maintenance, and economic viability of nuclear power systems. The research at The University of Tennessee focused on the development of techniques for monitoring process and structural integrity of steam generators and heat exchangers. The objectives of the project were accomplished by the completion of the following tasks. All the objectives were accomplished during the project period. This report summarizes the research and development activities, results, and accomplishments during June 2001 September 2004. Development and testing of a high-fidelity nodal model of a U-tube steam generator (UTSG) to simulate the effects of fouling and to generate a database representing normal and degraded process conditions. Application of the group method of data handling (GMDH) method for process variable prediction. Development of a laboratory test module to simulate particulate fouling of HX tubes and its effect on overall thermal resistance. Application of the GMDH technique to predict HX fluid temperatures, and to compare with the calculated thermal resistance.Development of a hybrid modeling technique for process diagnosis and its evaluation using laboratory heat exchanger test data. Development and testing of a sensor suite using piezo-electric devices for monitoring structural integrity of both flat plates (beams) and tubing. Experiments were performed in air, and in water with and without bubbly flow. Development of advanced signal processing methods using

  20. On-Line Monitoring and Diagnostics of the Integrity of Nuclear Plant Steam Generators and Heat Exchangers.

    Energy Technology Data Exchange (ETDEWEB)

    Belle R. Upadhyaya; J. Wesley Hines

    2004-09-27

    The overall purpose of this Nuclear Engineering Education Research (NEER) project was to integrate new, innovative, and existing technologies to develop a fault diagnostics and characterization system for nuclear plant steam generators (SG) and heat exchangers (HX). Issues related to system level degradation of SG and HX tubing, including tube fouling, performance under reduced heat transfer area, and the damage caused by stress corrosion cracking, are the important factors that influence overall plant operation, maintenance, and economic viability of nuclear power systems. The research at The University of Tennessee focused on the development of techniques for monitoring process and structural integrity of steam generators and heat exchangers. The objectives of the project were accomplished by the completion of the following tasks. All the objectives were accomplished during the project period. This report summarizes the research and development activities, results, and accomplishments during June 2001-September 2004. (1) Development and testing of a high-fidelity nodal model of a U-tube steam generator (UTSG) to simulate the effects of fouling and to generate a database representing normal and degraded process conditions. Application of the group method of data handling (GMDH) method for process variable prediction. (2) Development of a laboratory test module to simulate particulate fouling of HX tubes and its effect on overall thermal resistance. Application of the GMDH technique to predict HX fluid temperatures, and to compare with the calculated thermal resistance. (3) Development of a hybrid modeling technique for process diagnosis and its evaluation using laboratory heat exchanger test data. (4) Development and testing of a sensor suite using piezo-electric devices for monitoring structural integrity of both flat plates (beams) and tubing. Experiments were performed in air, and in water with and without bubbly flow. (5) Development of advanced signal

  1. A Neural Dynamic Architecture for Reaching and Grasping Integrates Perception and Movement Generation and Enables On-Line Updating

    Science.gov (United States)

    Knips, Guido; Zibner, Stephan K. U.; Reimann, Hendrik; Schöner, Gregor

    2017-01-01

    Reaching for objects and grasping them is a fundamental skill for any autonomous robot that interacts with its environment. Although this skill seems trivial to adults, who effortlessly pick up even objects they have never seen before, it is hard for other animals, for human infants, and for most autonomous robots. Any time during movement preparation and execution, human reaching movement are updated if the visual scene changes (with a delay of about 100 ms). The capability for online updating highlights how tightly perception, movement planning, and movement generation are integrated in humans. Here, we report on an effort to reproduce this tight integration in a neural dynamic process model of reaching and grasping that covers the complete path from visual perception to movement generation within a unified modeling framework, Dynamic Field Theory. All requisite processes are realized as time-continuous dynamical systems that model the evolution in time of neural population activation. Population level neural processes bring about the attentional selection of objects, the estimation of object shape and pose, and the mapping of pose parameters to suitable movement parameters. Once a target object has been selected, its pose parameters couple into the neural dynamics of movement generation so that changes of pose are propagated through the architecture to update the performed movement online. Implementing the neural architecture on an anthropomorphic robot arm equipped with a Kinect sensor, we evaluate the model by grasping wooden objects. Their size, shape, and pose are estimated from a neural model of scene perception that is based on feature fields. The sequential organization of a reach and grasp act emerges from a sequence of dynamic instabilities within a neural dynamics of behavioral organization, that effectively switches the neural controllers from one phase of the action to the next. Trajectory formation itself is driven by a dynamical systems version of

  2. A Neural Dynamic Architecture for Reaching and Grasping Integrates Perception and Movement Generation and Enables On-Line Updating.

    Science.gov (United States)

    Knips, Guido; Zibner, Stephan K U; Reimann, Hendrik; Schöner, Gregor

    2017-01-01

    Reaching for objects and grasping them is a fundamental skill for any autonomous robot that interacts with its environment. Although this skill seems trivial to adults, who effortlessly pick up even objects they have never seen before, it is hard for other animals, for human infants, and for most autonomous robots. Any time during movement preparation and execution, human reaching movement are updated if the visual scene changes (with a delay of about 100 ms). The capability for online updating highlights how tightly perception, movement planning, and movement generation are integrated in humans. Here, we report on an effort to reproduce this tight integration in a neural dynamic process model of reaching and grasping that covers the complete path from visual perception to movement generation within a unified modeling framework, Dynamic Field Theory. All requisite processes are realized as time-continuous dynamical systems that model the evolution in time of neural population activation. Population level neural processes bring about the attentional selection of objects, the estimation of object shape and pose, and the mapping of pose parameters to suitable movement parameters. Once a target object has been selected, its pose parameters couple into the neural dynamics of movement generation so that changes of pose are propagated through the architecture to update the performed movement online. Implementing the neural architecture on an anthropomorphic robot arm equipped with a Kinect sensor, we evaluate the model by grasping wooden objects. Their size, shape, and pose are estimated from a neural model of scene perception that is based on feature fields. The sequential organization of a reach and grasp act emerges from a sequence of dynamic instabilities within a neural dynamics of behavioral organization, that effectively switches the neural controllers from one phase of the action to the next. Trajectory formation itself is driven by a dynamical systems version of

  3. Monitoring on-line system for the lactic fermentation measurement using the integration enzyme sensor; Shusekika koso sensa wo mochiita nyusan hakko keisokuyo onrain monitringu shisutemu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Masayasu; Kumagaya, Tsuyoshi; Nakajima, Yoichi [Kyushu Institute of Technology, Fukuoka (Japan)

    1999-04-05

    The monitoring on-line system for the lactic fermentation measurement in which the simultaneous measurement of the substrate. Generation was possible was constructed without consuming the culture medium by using soliciting small enzyme sensor and flow injection analysis system integrate. There was the linearity that anyway was also range of concentration of 70mM or less and that it is good on the calibration curve of minute glucose, lactose, and lactic acid sensor. It became clear that it proved that all range of concentration of the substrate of these three which combining with the micro diary system, breaks in the lactic fermentation measurement with the necessity can be measured and not observe the interference by medium components, etc. either. Constructed monitoring on-line system is Lactobacillus delbrueckii and, it was applied to the lactic fermentation process of Lactobacillus lactis. Through the fermentation process for 24 hours, simultaneous measurement of glucose (or lactose) and lactic acid is possible. The measured value agreed well with the result of colorimetric method using the enzyme. (translated by NEDO)

  4. An integrated sample pretreatment platform for quantitative N-glycoproteome analysis with combination of on-line glycopeptide enrichment, deglycosylation and dimethyl labeling

    Energy Technology Data Exchange (ETDEWEB)

    Weng, Yejing; Qu, Yanyan; Jiang, Hao; Wu, Qi [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of the Chinese Academy of Sciences, Beijing 100039 (China); Zhang, Lihua, E-mail: lihuazhang@dicp.ac.cn [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Yuan, Huiming [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Zhou, Yuan [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of the Chinese Academy of Sciences, Beijing 100039 (China); Zhang, Xiaodan; Zhang, Yukui [National Chromatographic Research and Analysis Center, Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

    2014-06-23

    Highlights: • An integrated platform for quantitative N-glycoproteome analysis was established. • On-line enrichment, deglycosylation and labeling could be achieved within 160 min. • A N{sub 2}-assisted interface was applied to improve the compatibility of the platform. • The platform exhibited improved quantification accuracy, precision and throughput. - Abstract: Relative quantification of N-glycoproteomes shows great promise for the discovery of candidate biomarkers and therapeutic targets. The traditional protocol for quantitative analysis of glycoproteomes is usually off-line performed, and suffers from long sample preparation time, and the risk of sample loss or contamination due to manual manipulation. In this study, a novel integrated sample preparation platform for quantitative N-glycoproteome analysis was established, with combination of online N-glycopeptide capture by a HILIC column, sample buffer exchange by a N{sub 2}-assisted HILIC–RPLC interface, deglycosylation by a hydrophilic PNGase F immobilized enzymatic reactor (hIMER) and solid dimethyl labeling on a C18 precolumn. To evaluate the performance of such a platform, two equal aliquots of immunoglobulin G (IgG) digests were sequentially pretreated, followed by MALDI-TOF MS analysis. The signal intensity ratio of heavy/light (H/L) labeled deglycosylated peptides with the equal aliquots was 1.00 (RSD = 6.2%, n = 3), much better than those obtained by the offline protocol, with H/L ratio as 0.76 (RSD = 11.6%, n = 3). Additionally, the total on-line sample preparation time was greatly shortened to 160 min, much faster than that of offline approach (24 h). Furthermore, such an integrated pretreatment platform was successfully applied to analyze the two kinds of hepatocarcinoma ascites syngeneic cell lines with high (Hca-F) and low (Hca-P) lymph node metastasis rates. For H/L labeled Hca-P lysates with the equal aliquots, 99.6% of log 2 ratios (H/L) of quantified glycopeptides ranged from −1

  5. Use of On-Line Math Skills Modules in an Introductory General Education Geoscience Course at a Community College: The Importance of Integration Across Lab & Lecture Sections

    Science.gov (United States)

    Moosavi, S. C.

    2011-12-01

    The NSF sponsored on-line math skills module series The Math You Need When You Need It (TMYN) was constructed to provide math skill development and support to introductory geoscience course instructors whose students science learning is often hindered by deficiencies in critical math skills. The on-line modules give instructors a mechanism for student-centered, skill-specific math tutorials, practice exercises and assessments outside regular class time. In principle, a student deficient in a skill such as graphing, calculating a best-fit line or manipulating and quantifying a concept such as density can use the appropriate TMYN module to identify their area of weakness, focus on developing the skill using geologically relevant examples, and get feedback reflecting their mastery of the skill in an asynchronous format just as the skill becomes critical to learning in the course. The asynchronous format allows the instructor to remain focused on the geoscience content during class time without diverting all students' attention to skill remediation needed by only a subset of the population. Such a blended approach prevents the progression of the class from being slowed by the need for remediation for some students while simultaneously not leaving those students behind. The challenge to geoscience educators comes in identifying the best strategy for implementing TMYN modules in their classrooms. This presentation contrasts the effectiveness of 2 strategies for implementing TMYN in an introductory Earth System Science class taken as a general education science lab requirement by lower division students at a community college. This course is typical of many such large general education courses in that lab instruction is provided by separate educators from the primary instructor in charge of the lecture, often creating 2 parallel and only dimly connected courses in the experience of many students. In case 1, TMYN was implemented in 3 of 4 lab sections by an adjunct lab

  6. Laboratory Earth Under the Lens: Diachronic Evaluation of an Integrated Graduate-Level On-Line Earth System Science Course Series for K-12 Educators

    Science.gov (United States)

    Low, R.; Gosselin, D. C.; Haney, C.; Larson-Miller, C.; Bonnstetter, R.; Mandryk, C.

    2012-12-01

    Wilcoxan Signed Ranks Test is included in the battery of assessments to ensure that the courses achieve a statistically significant increase in participants' beliefs about their personal science teaching efficacy. The research design also includes the analysis of concept maps and content mastery assignments to assist in documentation of a teacher's transition from mastery of novice to expert knowledge. Content-based, course-specific pre and post knowledge surveys are included in the battery of assessments. In the analysis of on-line discussions, the project employs a textual analysis technique outlined in "The Rhetoric of Social Intervention," (RSI) (Opt and Gring 2009). RSI provides a promising analytical framework, especially when examining the development of understanding of scientific topics with societal implications, such as sustainability and climate change. The session provides a description of the integrated research design and data collection and analysis in the first year of this project.

  7. Control of grid integrated voltage source converters under unbalanced conditions: development of an on-line frequency-adaptive virtual flux-based approach

    Energy Technology Data Exchange (ETDEWEB)

    Suul, Jon Are

    2012-03-15

    Three-Phase Voltage Source Converters (VSCs) are finding widespread applications in grid integrated power conversion systems. The control systems of such VSCs are in an increasing number of these applications required to operate during voltage disturbances and unbalanced conditions. Control systems designed for grid side voltagesensor-less operation are at the same time becoming attractive due to the continuous drive for cost reduction and increased reliability of VSCs, but are not commonly applied for operation during unbalanced conditions. Methods for voltage-sensor-less grid synchronization and control of VSCs under unbalanced grid voltage conditions will therefore be the main focus of this Thesis. Estimation methods based on the concept of Virtual Flux, considering the integral of the converter voltage in analogy to the flux of an electric machine, are among the simplest and most well known techniques for achieving voltage-sensor-less grid synchronization. Most of the established techniques for Virtual Flux estimation are, however, either sensitive to grid frequency variations or they are not easily adaptable for operation under unbalanced grid voltage conditions. This Thesis addresses both these issues by proposing a simple approach for Virtual Flux estimation by utilizing a frequency-adaptive filter based on a Second Order Generalized Integrator (SOGI). The proposed approach can be used to achieve on-line frequency-adaptive varieties of conventional strategies for Virtual Flux estimation. The main advantage is, however, that the SOGI-based Virtual Flux estimation can be arranged in a structure that achieves inherent symmetrical component sequence separation under unbalanced conditions. The proposed method for Virtual Flux estimation can be used as a general basis for voltage-sensor-less grid synchronization and control during unbalanced conditions. In this Thesis, the estimated Virtual Flux signals are used to develop a flexible strategy for control of active

  8. On-line optical and X-ray spectroscopies with crystallography: an integrated approach for determining metalloprotein structures in functionally well defined states.

    Science.gov (United States)

    Ellis, Mark J; Buffey, Steven G; Hough, Michael A; Hasnain, S Samar

    2008-09-01

    X-ray-induced redox changes can lead to incorrect assignments of the functional states of metals in metalloprotein crystals. The need for on-line monitoring of the status of metal ions (and other chromophores) during protein crystallography experiments is of growing importance with the use of intense synchrotron X-ray beams. Significant efforts are therefore being made worldwide to combine different spectroscopies in parallel with X-ray crystallographic data collection. Here the implementation and utilization of optical and X-ray absorption spectroscopies on the modern macromolecular crystallography (MX) beamline 10, at the SRS, Daresbury Laboratory, is described. This beamline is equipped with a dedicated monolithic energy-dispersive X-ray fluorescence detector, allowing X-ray absorption spectroscopy (XAS) measurements to be made in situ on the same crystal used to record the diffraction data. In addition, an optical microspectrophotometer has been incorporated on the beamline, thus facilitating combined MX, XAS and optical spectroscopic measurements. By uniting these techniques it is also possible to monitor the status of optically active and optically silent metal centres present in a crystal at the same time. This unique capability has been applied to observe the results of crystallographic data collection on crystals of nitrite reductase from Alcaligenes xylosoxidans, which contains both type-1 and type-2 Cu centres. It is found that the type-1 Cu centre photoreduces quickly, resulting in the loss of the 595 nm peak in the optical spectrum, while the type-2 Cu centre remains in the oxidized state over a much longer time period, for which independent confirmation is provided by XAS data as this centre has an optical spectrum which is barely detectable using microspectrophotometry. This example clearly demonstrates the importance of using two on-line methods, spectroscopy and XAS, for identifying well defined redox states of metalloproteins during

  9. The Integration of On-Line Monitoring and Reconfiguration Functions using EDAA - European design and Automation Association1149.4 Into a Safety Critical Automotive Electronic Control Unit

    CERN Document Server

    Jeffrey, C; Prosser, S; Lickess, M; Richardson, A; Riches, S

    2011-01-01

    This paper presents an innovative application of EDAA - European design and Automation Association 1149.4 and the Integrated Diagnostic Reconfiguration (IDR) as tools for the implementation of an embedded test solution for an Automotive Electronic Control Unit implemented as a fully integrated mixed signal system. The paper described how the test architecture can be used for fault avoidance with results from a hardware prototype presented. The paper concludes that fault avoidance can be integrated into mixed signal electronic systems to handle key failure modes.

  10. A Distributed System for Learning Programming On-Line

    Science.gov (United States)

    Verdu, Elena; Regueras, Luisa M.; Verdu, Maria J.; Leal, Jose P.; de Castro, Juan P.; Queiros, Ricardo

    2012-01-01

    Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the "UVA On-line Judge", an existing…

  11. Sensor Fusion Based on an Integrated Neural Network and Probability Density Function (PDF) Dual Kalman Filter for On-Line Estimation of Vehicle Parameters and States.

    Science.gov (United States)

    Vargas-Melendez, Leandro; Boada, Beatriz L; Boada, Maria Jesus L; Gauchia, Antonio; Diaz, Vicente

    2017-04-29

    Vehicles with a high center of gravity (COG), such as light trucks and heavy vehicles, are prone to rollover. This kind of accident causes nearly 33 % of all deaths from passenger vehicle crashes. Nowadays, these vehicles are incorporating roll stability control (RSC) systems to improve their safety. Most of the RSC systems require the vehicle roll angle as a known input variable to predict the lateral load transfer. The vehicle roll angle can be directly measured by a dual antenna global positioning system (GPS), but it is expensive. For this reason, it is important to estimate the vehicle roll angle from sensors installed onboard in current vehicles. On the other hand, the knowledge of the vehicle's parameters values is essential to obtain an accurate vehicle response. Some of vehicle parameters cannot be easily obtained and they can vary over time. In this paper, an algorithm for the simultaneous on-line estimation of vehicle's roll angle and parameters is proposed. This algorithm uses a probability density function (PDF)-based truncation method in combination with a dual Kalman filter (DKF), to guarantee that both vehicle's states and parameters are within bounds that have a physical meaning, using the information obtained from sensors mounted on vehicles. Experimental results show the effectiveness of the proposed algorithm.

  12. On line routing per mobile phone

    DEFF Research Database (Denmark)

    Bieding, Thomas; Görtz, Simon; Klose, Andreas

    2009-01-01

    . Additionally it is of utmost importance that the employed communication system is suitable integrated with the firm’s enterprise application system and business processes. On basis of a case study, we describe in this paper a system that is cheap and easy to implement due to the use of simple mobile phones......On-line routing is concerned with building vehicle routes in an ongoing fashion in such a way that customer requests arriving dynamically in time are efficiently and effectively served. An indispensable prerequisite for applying on-line routing methods is mobile communication technology...

  13. Formación on line On line learning

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    2008-09-01

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.On line learning is a type of distance education based on new technologies. This article's aim is to introduce its main characteristics -asynchrony, non-presentiality, written communication, e-teacher role- as well as its challenges, risks, advantages and limitations. Differences between on line learning and face-to-face learning are presented in order to enable educational professionals to adapt their courses to the on line methodology. Planning and designing are introduced as key phases and, finally, useful concepts such as Virtual Learning Environment (VLE or Blended Learning (B-Learning are reviewed in order to achieve a better understanding of the on line learning field.

  14. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  15. Clean Air OnLine

    Energy Technology Data Exchange (ETDEWEB)

    Finney, D. [Environment Canada, Gatineau, PQ (Canada). Air Pollution Prevention Directorate

    2004-04-07

    This presentation describes Clean Air OnLine, a multi-tiered website dedicated to providing Canadians with information on air quality. The website is under development to support action to reduce air emissions, demonstrate the links between air emissions and environmental impacts, and enhance the understanding of sustainable community development issues such as health, energy, and urban sprawl. Partners in the Clean Air OnLine (CAOL) initiative include Environment Canada and the Clean Air Partnership which includes the Greater Toronto Area pilot project. The audience for CAOL includes municipal decision makers, local decision makers, community leaders, and the general public. The project provides Canadians with air pollution contextual information on pollution sources, pollutants, and related issues. It also provides information on health, environmental and economic impacts and the interrelationships with climate change issues and energy use. tabs., figs.

  16. On-line moisture analysis

    CERN Document Server

    Cutmore, N G

    2002-01-01

    Measurement of the moisture content of iron ore has become a key issue for controlling moisture additions for dust suppression. In most cases moisture content is still determined by manual or automatic sampling of the ore stream, followed by conventional laboratory analysis by oven drying. Although this procedure enables the moisture content to be routinely monitored, it is too slow for control purposes. This has generated renewed interest in on-line techniques for the accurate and rapid measurement of moisture in iron ore on conveyors. Microwave transmission techniques have emerged over the past 40 years as the dominant technology for on-line measurement of moisture in bulk materials, including iron ores. Alternative technologies have their limitations. Infra-red analysers are used in a variety of process industries, but rely on the measurement of absorption by moisture in a very thin surface layer. Consequently such probes may be compromised by particle size effects and biased presentation of the bulk mater...

  17. PHENIX on-line systems

    Energy Technology Data Exchange (ETDEWEB)

    Adler, S.S.; Allen, M.; Alley, G.; Amirikas, R.; Arai, Y.; Awes, T.C.; Barish, K.N.; Barta, F.; Batsouli, S.; Belikov, S.; Bennett, M.J.; Bobrek, M.; Boissevain, J.G.; Boose, S.; Britton, C.; Britton, L.; Bryan, W.L.; Cafferty, M.M.; Carey, T.A.; Chang, W.C.; Chi, C.Y.; Chiu, M.; Cianciolo, V.; Cole, B.A.; Constantin, P.; Cook, K.C.; Cunitz, H.; Desmond, E.J.; Ebisu, K.; Efremenko, Y.V.; El Chenawi, K.; Emery, M.S.; Engo, D.; Ericson, N.; Fields, D.E.; Frank, S.; Frantz, J.E.; Franz, A.; Frawley, A.D.; Fried, J.; Gannon, J.; Gee, T.F.; Gentry, R.; Giannotti, P.; Gustafsson, H.-A.; Haggerty, J.S.; Hahn, S.; Halliwell, J.; Hamagaki, H.; Hansen, A.G.; Hara, H.; Harder, J.; He, X.; Heistermann, F.; Hemmick, T.K.; Hibino, M.; Hill, J.C. E-mail: jhill@iastate.edu; Homma, K.; Jacak, B.V.; Jagadish, U.; Jia, J.; Kajihara, F.; Kametani, S.; Kamyshkov, Y.; Kandasamy, A.; Kang, J.H.; Kapustinsky, J.; Katou, K.; Kelley, M.A.; Kelly, S.; Kikuchi, J.; Kim, S.Y.; Kim, Y.G.; Kistenev, E.; Kotchetkov, D.; Kurita, K.; Lajoie, J.G.; Lenz, M.; Lenz, W.; Li, X.H.; Lin, S.; Liu, M.X.; Markacs, S.; Matathias, F.; Matsumoto, T.; Mead, J.; Mischke, R.E.; Mishra, G.C.; Moore, A.; Muniruzzamann, M.; Musrock, M.; Nagle, J.L.; Nandi, B.K.; Newby, J.; Nystrand, J.; O' Brien, E.; O' Connor, P.; Ohnishi, H.; Oskarsson, A.; Osterman, L.; Oyama, K.; Paffrath, L.; Pancake, C.E.; Pantuev, V.S.; Petridis, A.N.; Pisani, R.P.; Plagge, T.; Plasil, F.; Purschke, M.L.; Rankowitz, S.; Rao, R.; Rau, M.; Read, K.F.; Ryu, S.S.; Sakaguchi, T.; Sato, H.D.; Seto, R.; Shiina, T.; Silvermyr, D.; Simon-Gillo, J.; Simpson, M.; Sippach, W.; Skank, H.D.; Skutnik, S.; Sleege, G.A.; Smith, G.D.; Smith, M.; Stankus, P.W.; Steinberg, P.; Sugitate, T.; Sullivan, J.P.; Taketani, A.; Tamai, M.; Tanaka, Y.; Thomas, W.D.; Todd, R.; Toldo, F.; Turner, G.; Ushiroda, T.; Velkovska, J.; Hecke, H.W. van; Lith, M. van; Villatte, L.; Achen, W. von; Walker, J.W.; Wang, H.Q.; White, S.N.; Wintenberg, A.L.; Witzig, C.; Wood, L.[and others

    2003-03-01

    The PHENIX On-Line system takes signals from the Front End Modules (FEM) on each detector subsystem for the purpose of generating events for physics analysis. Processing of event data begins when the Data Collection Modules (DCM) receive data via fiber-optic links from the FEMs. The DCMs format and zero suppress the data and generate data packets. These packets go to the Event Builders (EvB) that assemble the events in final form. The Level-1 trigger (LVL1) generates a decision for each beam crossing and eliminates uninteresting events. The FEMs carry out all detector processing of the data so that it is delivered to the DCMs using a standard format. The FEMs also provide buffering for LVL1 trigger processing and DCM data collection. This is carried out using an architecture that is pipelined and deadtimeless. All of this is controlled by the Master Timing System (MTS) that distributes the RHIC clocks. A Level-2 trigger (LVL2) gives additional discrimination. A description of the components and operation of the PHENIX On-Line system is given and the solution to a number of electronic infrastructure problems are discussed.

  18. A Green Antioxidant Activity-Integrated Dual-Standard Method for Rapid Evaluation of the Quality of Traditional Chinese Medicine Xuebijing Injection by On-Line DPPH-CE-DAD

    Science.gov (United States)

    Li, Jin; Liu, Jiao; Liu, Wei; Yu, Xie-an; An, Mingrui; Gao, Xiu-mei

    2016-01-01

    Much attention has been focused on treatment of sepsis which leads to high mortality all over the world in every year. Antioxidant activity seems to play a prominent role in the treatment of sepsis exhibited by Xuebijing injection. The aim of the present research was to develop an on-line 1, 1-diphenyl-2-picrylhydrazyl- (DPPH-) capillary electrophoresis-diode array detector (on-line DPPH-CE-DAD) method for rapidly assessing antioxidant properties and efficacious material basis of antioxidant activity as a way of quality control of Xuebijing injection. Several parameters affecting the separation were investigated, including the pH and concentrations of buffer, SDS, β-CD, and organic modifier as well as voltage and cassette temperature. Compared to previous traditional method, this improved method shortened the experimental cycle and became more efficient because it was successfully applied to analyze total antioxidant activity and contents of twelve antioxidants of Xuebijing injection under the same condition. The results revealed that the on-line DPPH-CE-DAD method was a reagent-saving, rapid, feasible, and green technique for quality control of Xuebijing injection in terms of pharmacological activity and contents of active ingredients. It also offered new opportunities for the analysis of antioxidant activity of complex matrix. PMID:27872649

  19. Efficiently Building On-line Tools for Distributed Heterogeneous Environments

    Directory of Open Access Journals (Sweden)

    Günther Rackl

    2002-01-01

    Full Text Available Software development is getting more and more complex, especially within distributed middleware-based environments. A major drawback during the overall software development process is the lack of on-line tools, i.e. tools applied as soon as there is a running prototype of an application. The MIMO MIddleware MOnitor provides a solution to this problem by implementing a framework for an efficient development of on-line tools. This paper presents a methodology for developing on-line tools with MIMO. As an example scenario, we choose a distributed medical image reconstruction application, which represents a test case with high performance requirements. Our distributed, CORBA-based application is instrumented for being observed with MIMO and related tools. Additionally, load balancing mechanisms are integrated for further performance improvements. As a result, we obtain an integrated tool environment for observing and steering the image reconstruction application. By using our rapid tool development process, the integration of on-line tools shows to be very convenient and enables an efficient tool deployment.

  20. Are on-line currencies virtual banknotes?

    OpenAIRE

    Stephen F. Quinn; William Roberds

    2003-01-01

    The history of money is marked by innovations that have expanded the role of "inside money"-money created by the private sector. For instance, the past few years have seen the development of several types of on-line payment arrangements, some of which have been dubbed "on-line currencies." ; This article examines the likely success or failure of on-line currencies by means of a historical analogy. The discussion compares the introduction of on-line currencies to the debut of the bearer bankno...

  1. SOL: INNOVACIÓN ON-LINE

    Directory of Open Access Journals (Sweden)

    Rubén Faúndez

    2007-11-01

    Full Text Available Las aplicaciones de simulación tienden a ser cada vez más cercanas a usuarios e industrias. Sin embargo, muchas de ellas no poseen ni la capacidad ni el conocimiento como para desarrollar internamente sus modelos de simulación. Por este motivo, y como una forma de apoyar la toma de decisiones basándose en modelos de simulación, se presenta la plataforma SOL (Simulación On Line. La metodología completa de trabajo, así como la interacción entre SOL, Empresa y Asesor, son presentadas. Su base de datos, los niveles de usuarios, sus funcionalidades, y la creación automatizada de información grafica y visual, también son explicadas. En el caso de aplicación, el uso de SOL para apoyar la toma de decisiones en una operación de movimiento de material, permite a los tomadores de decisión acceder a análisis robustos basados en información extraída de los modelos de simulación. SOL, al almacenar información, funcionar vía web, generar análisis automatizados y crear visualizaciones, permite cumplir con las expectativas de los usuarios respecto a una solución integral en simulación.

  2. Time-resolved cell culture assay analyser (TReCCA Analyser) for the analysis of on-line data: data integration--sensor correction--time-resolved IC50 determination.

    Science.gov (United States)

    Lochead, Julia; Schessner, Julia; Werner, Tobias; Wölfl, Stefan

    2015-01-01

    Time-resolved cell culture assays circumvent the need to set arbitrary end-points and reveal the dynamics of quality controlled experiments. However, they lead to the generation of large data sets, which can represent a complexity barrier to their use. We therefore developed the Time-Resolved Cell Culture Assay (TReCCA) Analyser program to perform standard cell assay analyses efficiently and make sophisticated in-depth analyses easily available. The functions of the program include data normalising and averaging, as well as smoothing and slope calculation, pin-pointing exact change time points. A time-resolved IC50/EC50 calculation provides a better understanding of drug toxicity over time and a more accurate drug to drug comparison. Finally the logarithmic sensor recalibration function, for sensors with an exponential calibration curve, homogenises the sensor output and enables the detection of low-scale changes. To illustrate the capabilities of the TReCCA Analyser, we performed on-line monitoring of dissolved oxygen in the culture media of the breast cancer cell line MCF-7 treated with different concentrations of the anti-cancer drug Cisplatin. The TReCCA Analyser is freely available at www.uni-heidelberg.de/fakultaeten/biowissenschaften/ipmb/biologie/woelfl/Research.html. By introducing the program, we hope to encourage more systematic use of time-resolved assays and lead researchers to fully exploit their data.

  3. On line routing per mobile phone

    DEFF Research Database (Denmark)

    Bieding, Thomas; Görtz, Simon; Klose, Andreas

    2009-01-01

    On-line routing is concerned with building vehicle routes in an ongoing fashion in such a way that customer requests arriving dynamically in time are efficiently and effectively served. An indispensable prerequisite for applying on-line routing methods is mobile communication technology. Addition...

  4. On-line generalized Steiner problem

    Energy Technology Data Exchange (ETDEWEB)

    Awerbuch, B.; Azar, Y.; Bartal, Y. [Tel Aviv Univ. (Israel)

    1996-12-31

    The Generalized Steiner Problem (GSP) is defined as follows. We are given a graph with non-negative weights and a set of pairs of vertices. The algorithm has to construct minimum weight subgraph such that the two nodes of each pair are connected by a path. We consider the on-line generalized Steiner problem, in which pairs of vertices arrive on-line and are needed to be connected immediately. We give a simple O(log{sup 2} n) competitive deterministic on-line algorithm. The previous best online algorithm (by Westbrook and Yan) was O({radical}n log n) competitive. We also consider the network connectivity leasing problem which is a generalization of the GSP. Here edges of the graph can be either bought or leased for different costs. We provide simple randomized O(log{sup 2} n) competitive algorithm based on the on-line generalized Steiner problem result.

  5. The war against on-line piracy

    OpenAIRE

    Harris, Julian

    2011-01-01

    A summary by Julian Harris, Deputy General Editor Amicus Curiae, of US attempts to control what it identifies as rogue Internet sites engaged in on-line piracy and opposition to such legislative moves.

  6. On-Line Acquisitions by LOLITA

    Directory of Open Access Journals (Sweden)

    Frances G. Spigai

    1970-12-01

    Full Text Available The on-line acquisition program (LOLITA in use at the Oregon State University Library is described in terms of development costs, equipment requirements, and overall design philosophy. In particular, the record format and content of records in the on-order file, and the on-line processing of these records (input, search, correction, output using a cathode ray tube display terminal are detailed.

  7. ACSEPP On-Line Electronic Payment Protocol

    Institute of Scientific and Technical Information of China (English)

    WANG Shao-bin; ZHU Xian; HONG Fan

    2004-01-01

    With analyzing the existing on-line electronic payment protocols, this paper presents a new on-line electronic payment protocol named ACSEPP: Anonymous, Convenient and Secure Electronic Payment Protocol.Its aim is to design a practical electronic payment protocol which is both secure and convenient.Without using PKI_CA frame, it realized the anonymity of consumer and merchant, the convenient of handling, the low cost of maintenance and the security.

  8. On-Line NDE for Advanced Reactor Designs

    Science.gov (United States)

    Nakagawa, N.; Inanc, F.; Thompson, R. B.; Junker, W. R.; Ruddy, F. H.; Beatty, J. M.; Arlia, N. G.

    2003-03-01

    This expository paper introduces the concept of on-line sensor methodologies for monitoring the integrity of components in next generation power systems, and explains general benefits of the approach, while describing early conceptual developments of suitable NDE methodologies. The paper first explains the philosophy behind this approach (i.e. the design-for-inspectability concept). Specifically, we describe where and how decades of accumulated knowledge and experience in nuclear power system maintenance are utilized in Generation IV power system designs, as the designs are being actively developed, in order to advance their safety and economy. Second, we explain that Generation IV reactor design features call for the replacement of the current outage-based maintenance by on-line inspection and monitoring. Third, the model-based approach toward design and performance optimization of on-line sensor systems, using electromagnetic, ultrasonic, and radiation detectors, will be explained. Fourth, general types of NDE inspections that are considered amenable to on-line health monitoring will be listed. Fifth, we will describe specific modeling developments to be used for radiography, EMAT UT, and EC detector design studies.

  9. IOOS Data Portals and Uniform On-line Browse Capabilities

    Science.gov (United States)

    Howard, M.; Currier, R. D.; Kobara, S.; Gayanilo, F.

    2015-12-01

    The Gulf of Mexico Coastal Ocean Observing System Regional Association (GCOOS-RA) is one of eleven Regional Associations organized under the NOAA-led U.S. Integrated Ocean Observing System (IOOS) Program Office. Each of the RAs operate standards-based regional data portals designed to aggregate near real-time and historical observed data and modeled outputs from distributed providers and to offer these and derived products in standardized ways to a diverse set of users. The RA's portals are based on the IOOS Data and Communications Plan which describes the functional elements needed for an interoperable system. One of these elements is called "Uniform On-line Browse" which is an informational service designed primarily to visualize the inventory of a portal. An on-line browse service supports the end user's need to discover what parameters are available, to learn the spatial and temporal extend of the holdings, and to examine the character of the data (e.g, variability, gappiness, etc). These pieces of information help the end user decide if the data are fit for his/her purpose and to construct valid data requests. Note that on-line browse is a distinctly different activity than data analysis because it seeks to yield knowledge about the inventory and not about what the data mean. "Uniform" on-line browse is a service that takes advantage of the standardization of the data portal's data access points. Most portals represent station locations on a map. This is a view of the data inventory but these plots are rarely generated by pulling data through the standards-based services offered to the end users but through methods only available to the portal programmers. This work will present results of Uniform On-line browse tools developed within GCOOS-RA and their applicability to other RA portals.

  10. Formación on line

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.

  11. Educational On-Line Gaming Propensity

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana; Kirchner, Kathrin

    2014-01-01

    Educational on-line games are promising for new generations of students who are grown up digital. Th e new generations of students are technology savvy and spend lots of time on the web and on social networks. Based on an exploratory study, this article investigates the factors that infl uence...... students’ willingness to participate in serious games for teaching/learning. Th is study investigates the relationship between students’ behavior on Facebook, Facebook games, and their attitude toward educational on-line games. Th e results of the study reveal that the early adopters of educational games...

  12. ON-LINE DOCUMENTS CONTENT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    VASILESCU RAMONA VIOLETA

    2010-05-01

    Full Text Available This paper outlines the steps and technologies used in developing an on-line application server with many desktop clients, and with high power processing for a wide range of input documents to obtain searchable documents on the highest portability standards, PDF and PDF /A.

  13. Polar On-Line Acquisition Relay and Transmission System (POLARATS)

    Energy Technology Data Exchange (ETDEWEB)

    Yuracko, K.

    2004-07-15

    POLARATS (Polar On-Line Acquisition Relay And Transmission System) is being developed by YAHSGS LLC (YAHSGS) and Oak Ridge National Laboratory (ORNL) to provide remote, unattended monitoring of environmental parameters under harsh environmental conditions. In particular, instrumental design and engineering is oriented towards protection of human health in the Arctic, and with the additional goal of advancing Arctic education and research. POLARATS will obtain and transmit environmental data from hardened monitoring devices deployed in locations important to understanding atmospheric and aquatic pollutant migration as it is biomagnified in Arctic food chains. An Internet- and personal computer (PC)-based educational module will provide real time sensor data, on-line educational content, and will be integrated with workbooks and textbooks for use in middle and high school science programs. The educational elements of POLARATS include an Internet-based educational module that will instruct students in the use of the data and how those data fit into changing Arctic environments and food chains. POLARATS will: (1) Enable students, members of the community, and scientific researchers to monitor local environmental conditions in real time over the Internet; and (2) Provide additional educational benefits through integration with middle- and high-school science curricula. Information will be relayed from POLARATS devices to classrooms and libraries along with custom-designed POLARATS teaching materials that will be integrated into existing curricula to enhance the educational benefits realized from the information obtained.

  14. Integrated On-line Instrumentation System of Magnetic Properties Measurement

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A portable microcomputer-controlled inspection system has been developed for detection of mag netic properties of soft magnetic materials. It incorporates custom designed software for control of the magnetic field during operation such as demagnetization, field sweeping, and for data logging and analysis. Results are recorded using a 12-bit analog to digital converter and are then stored on disk. The magnetic hysteresis loop and Barkhausen noise data can be converted into important magnetic parameters:, coecivity, remanence, and hysteresis loss, Barkhausen ampli tude, and Barkhausen noise energy. This system incorporated with the magnetostriction, and magnetoacoustic emission, is then related with the nondestructive detection of material degra dation.

  15. Maintaining Academic Integrity in On-Line Education.

    Science.gov (United States)

    Heberling, Michael

    2002-01-01

    Discussion of academic cheating and plagiarism focuses on occurrences in online courses, based on experiences at Baker College (Michigan). Highlights include tools to fight plagiarism; using search engines to detect plagiarism; digital paper mills; plagiarism detection companies; and the role of administrators and faculty. (LRW)

  16. Improvement plans for the RHIC/AGS on-line model environments

    Energy Technology Data Exchange (ETDEWEB)

    Brown,K.A.; Ahrens, L.; Beebe-Wang, J.; Morris, J.; Nemesure, S.; Robert-Demolaize, G.; Satogata, T.; Schoefer, V.; Tepikian, S.

    2009-08-31

    The on-line models for Relativistic Ion Collider (RHIC) and the RHIC pre-injectors (the AGS and the AGS Booster) can be thought of as containing our best collective knowledge of these accelerators. As we improve these on-line models we are building the framework to have a sophisticated model-based controls system. Currently the RHIC on-line model is an integral part of the controls system, providing the interface for tune control, chromaticity control, and non-linear chromaticity control. What we discuss in this paper is our vision of the future of the on-line model environment for RHIC and the RHIC preinjectors. Although these on-line models are primarily used as Courant-Snyder parameter calculators using live machine settings, we envision expanding these environments to encompass many other problem domains.

  17. Educational On-Line Gaming Propensity

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana; Kirchner, Kathrin

    2014-01-01

    Educational on-line games are promising for new generations of students who are grown up digital. Th e new generations of students are technology savvy and spend lots of time on the web and on social networks. Based on an exploratory study, this article investigates the factors that infl uence...... students’ willingness to participate in serious games for teaching/learning. Th is study investigates the relationship between students’ behavior on Facebook, Facebook games, and their attitude toward educational on-line games. Th e results of the study reveal that the early adopters of educational games...... are likely to be students, who are young, have only a few Facebook connections, who currently play Facebook game(s). Furthermore, the study emphasizes that there may be differences between students coming from various countries....

  18. New Trends in on-line Marketing

    OpenAIRE

    Palkovič, Lukáš

    2011-01-01

    This bachelor thesis deals with new trend of internet marketing, it focuses especially on viral marketing. The theoretical part charasterizes the process of viral campaigns, furthermore deals with the components and aspects of on-line environment. Another separated chapter presents social networks, their place in viral marketing and at last but not least the viral video making process. The practical part contains different analyses of specific viral campaigns. The next and equally the last pa...

  19. Connecting to On-line Data

    Science.gov (United States)

    Eichhorn, G.; Astrophysics Datacenter Executive Committee (ADEC)

    2004-05-01

    The Astrophysics Datacenter Executive Committee (ADEC) is coordinating the development of a system to facilitate the linking to on-line data. This system has three components: 1. Unique dataset identifiers. 2. A verification system for identifiers. 3. Permanent links to on-line data sets. 1. The ADEC has agreed on a naming scheme for data sets that allows for the unique identification of any data set. The ADEC data centers will clearly mark their data with these identifiers to allow the generation of links to these data. 2. Each data center has a utility that can check whether a data set identifier is a valid identifier at that center. A central verifier allows third parties access to these individual verifiers through a single portal. 3. The central verifier also provides permanent links to data sets through a central link forwarding system. This makes it possible to move data sets between data centers while maintaining the permanent links. The ADEC plans to first use this system to implement the linking from the literature to on-line data in a collaboration with the AAS and the University of Chicago Press for the AAS journals.

  20. Total on-line purchasing system (TOPS)

    Energy Technology Data Exchange (ETDEWEB)

    Collins, N.

    1995-11-01

    The Information Management Division (IMD) at LLNL is developing a new purchasing system for the Procurement Department. The first major development of this new system is called, {open_quotes}Total On-Line Purchasing System{close_quotes} (TOPS). TOPS will help speed up the requisitioning process by having requisitions electronically entered by requesters and electronically sent to buyers to be put on Purchase Orders. The new purchasing system will use Electronic Commerce (EC)/Electronic Data Interchange (EDI), to help increase transaction flows for shipping notices, RFQs, Quotes, Purchase Orders, and Invoices. ANSI X.12 is the EDI standard that this new EC will use.

  1. On-line and Mobil Learning Activities

    Science.gov (United States)

    Ackerman, S. A.; Whittaker, T. M.; Jasmin, T.; Mooney, M. E.

    2012-12-01

    Introductory college-level science courses for non-majors are critical gateways to imparting not only discipline-specific information, but also the basics of the scientific method and how science influences society. They are also indispensable for student success to degree. On-line, web-based homework (whether on computers or mobile devices) is a rapidly growing use of the Internet and is becoming a major component of instruction in science, replacing delayed feedback from a few major exams. Web delivery and grading of traditional textbook-type questions is equally effective as having students write them out for hand grading, as measured by student performance on conceptual and problem solving exams. During this presentation we will demonstrate some of the interactive on-line activities used to teach concepts and how scientists approach problem solving, and how these activities have impacted student learning. Evaluation of the activities, including formative and summative, will be discussed and provide evidence that these interactive activities significantly enhance understanding of introductory meteorological concepts in a college-level science course. More advanced interactive activities are also used in our courses for department majors, some of these will be discussed and demonstrated. Bring your mobile devices to play along! Here is an example on teaching contouring: http://profhorn.aos.wisc.edu/wxwise/contour/index.html

  2. Aprender a innovar: una experiencia on line

    Directory of Open Access Journals (Sweden)

    Joaquín MORENO MARCHAL

    2014-11-01

    Full Text Available La creatividad y la innovación se han convertido en recursos clave en la denominada sociedad del conocimiento, que bien podría ser también llamada sociedad de la innovación. Pero innovar es una actividad compleja, que integra la aplicación de múltiples capacidades, el pensamiento divergente y convergente, la gestión de equipos humanos, la comunicación. Ahora bien, a innovar se puede, y se debe, aprender. Aprender a innovar es un reto y también una obligación para el conjunto del sistema educativo en todos sus niveles. Partiendo de estas consideraciones este trabajo expone una experiencia de aprendizaje de la creatividad y de la innovación a través de un curso totalmente on line basado en la plataforma MOODLE, en el marco del Programa de Formación Permanente de la Universidad de Cádiz. Se presenta un modelo del proceso de innovación, denominado CREALAB, de elaboración propia. Este modelo se ha utilizado como base del proceso de aprendizaje de la creatividad y de la innovación y en el diseño del curso, está organizado en torno a actividades y tiene un carácter iterativo y realimentado. Se presentan además el conjunto del diseño metodológico y los resultados obtenidos en las dos ediciones celebradas hasta el momento. El diseño del curso totalmente on line y los resultados alcanzados permiten estimar un alto potencial de aplicación, tanto a nivel personal como a nivel organizacional.

  3. On-line chemical composition analyzer development

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, M.J.; Garrison, A.A.; Muly, E.C.; Moore, C.F.

    1992-02-01

    The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office of Industrial Technologies, whose mission is to conduct cost-shared R D for new high-risk, high-payoff industrial energy conservation technologies. Although this document contains references to individual manufacturers and their products, the opinions expressed on the products reported do not necessarily reflect the position of the Department of Energy.

  4. Modelling of pulverized coal boilers: review and validation of on-line simulation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Diez, L.I.; Cortes, C.; Campo, A. [University of Zaragoza, Zaragoza (Spain). Centro de Investigacion de Recursos y Consumos Energeticos (CIRCE)

    2005-07-01

    Thermal modelling of large pulverized fuel utility boilers has reached a very remarkable development, through the application of CFD techniques and other advanced mathematical methods. However, due to the computational requirements, on-line monitoring and simulation tools still rely on lumped models and semiempirical approaches, which are often strongly simplified and not well connected with sound theoretical basis. This paper reviews on-line modelling techniques, aiming at the improvement of their capabilities, by means of the revision and modification of conventional lumped models and the integration of off-line CFD predictions. The paper illustrates the coherence of monitoring calculations as well as the validation of the on-line thermal simulator, starting from real operation data from a case-study unit. The outcome is that it is possible to significantly improve the accuracy of on-line calculations provided by conventional models, taking into account the singularities of large combustion systems and coupling offline CFD predictions for selected scenarios.

  5. On-line Test for Train Communication Based System

    Institute of Scientific and Technical Information of China (English)

    Zeng Xiaoqing; Masayuki Matsumoto; Kinji Mori; XU Fucang

    2002-01-01

    This paper gives out a new train automatic control system, which is based on train communication, and proposes a high assurance method to construct the system from current system. In current automatic train control (ATC) system, the central logic device detects position of each train and calculates permissible speed of each blocking section. Therefore, the central logic device controls speed of all trains. On the contrary, in the new system proposed in this paper, there is no central logical device and, train can communicate each other. The train detects the position and calculates the permissible speed itself according to the received position information of the preceding train. In the traditional method of changing an old system to a new one, test must be done off-line.While the integration technique proposed in this paper achieves on-line properties, and high assurance can be satisfied.

  6. Influence of visualization on consumption during on-line shopping

    OpenAIRE

    Hictaler, Urška

    2013-01-01

    This diploma work studies the influence of visualization on consumption during on-line shopping. The first part of the thesis starts with key areas of visualization, consumption and on-line shopping. Visualization, areas of use, human perception and ways of product presentation in on-line shops are defined discussed first. Next, consumption, consumers and factors that influence their decisions and satisfaction are defined. The last topic in the first part of the thesis discusses on-line shopp...

  7. On-Line Learning: One Way to Bring People Together

    Science.gov (United States)

    Goff-Kfouri, Carol Ann

    2006-01-01

    The purpose of this study was to demonstrate the benefits of on-line learning for adult learners and to further demystify three common misconceptions concerning on-line learning: students certainly do receive support from their on-line professors, the professor is pro-active rather than passive, and students may be more motivated to learn than in…

  8. On-Line Impact Load Identification

    Directory of Open Access Journals (Sweden)

    Krzysztof Sekuła

    2013-01-01

    Full Text Available The so-called Adaptive Impact Absorption (AIA is a research area of safety engineering devoted to problems of shock absorption in various unpredictable scenarios of collisions. It makes use of smart technologies (systems equipped with sensors, controllable dissipaters and specialised tools for signal processing. Examples of engineering applications for AIA systems are protective road barriers, automotive bumpers or adaptive landing gears. One of the most challenging problems for AIA systems is on-line identification of impact loads, which is crucial for introducing the optimum real-time strategy of adaptive impact absorption. This paper presents the concept of an impactometer and develops the methodology able to perform real-time impact load identification. Considered dynamic excitation is generated by a mass M1 impacting with initial velocity V0. An analytical formulation of the problem, supported with numerical simulations and experimental verifications is presented. Two identification algorithms based on measured response of the impacted structure are proposed and discussed. Finally, a concept of the AIA device utilizing the idea of impactometer is briefly presented.

  9. Integration

    DEFF Research Database (Denmark)

    Emerek, Ruth

    2004-01-01

    Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration......Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration...

  10. Robust on-line monitoring of biogas processes; Robusta maettekniker on-line foer optimerad biogasproduktion

    Energy Technology Data Exchange (ETDEWEB)

    Nordberg, Aake; Hansson, Mikael; Kanerot, Mija; Krozer, Anatol; Loefving, Bjoern; Sahlin, Eskil

    2010-03-15

    Although demand for biomethane in Sweden is higher than ever, many Swedish codigestion plants are presently operated below their designed capacity. Efforts must be taken to increase the loading rate and guarantee stable operation and high availability of the plants. There are currently no commercial systems for on-line monitoring, and due to the characteristics of the material, including corrosion and tearing, robust applications have to be developed. The objective of this project was to identify and study different monitoring technologies with potential for on-line monitoring of both substrate mixtures and anaerobic digester content. Based on the prerequisites and demands at Boraas Energi och Miljoe AB's (BEMAB, the municipal energy and waste utility in the city of Boraas, Sweden) biogas plant, the extent of the problems, measurement variables and possible ways of managing these issues have been identified and prioritized. The substrate mixtures in question have a high viscosity and are inhomogeneous with variation in composition, which calls for further homogenization, dilution and filtration to achieve high precision in the necessary analyses. Studies of using different mixers and mills showed that the particle size (800 mum) needed for on-line COD measurement could not be achieved. The problem of homogenization can be avoided if indirect measurement methods are used. Laboratory tests with NIR (near-infra red spectroscopy) showed that VS can be predicted (R2=0,78) in the interval of 2-9% VS. Furthermore, impedance can give a measurement of soluble components. However, impedance is not sensitive enough to give a good measurement of total TS. Microwave technology was installed at the production plant and showed a faster response to changes in TS than the existing TS-sensor. However, due to technical problems, the evaluation only could be done during a limited period of ten days. BEMAB will continue the measurements and evaluation of the instrument. The

  11. DOE-EPRI On-Line Monitoring Implementation Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    E. Davis, R. Bickford

    2003-01-02

    Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasability of on-line monitoring at several participating nuclear plants. The results have been very enouraging, and substantial progress is anticipated in the coming years.

  12. Poss On-line (Personalisation of Self-Service Solutions across On-line platforms)

    DEFF Research Database (Denmark)

    Nielsen, Janni; Nielsen, Lene; Jespersen, Mikkel

    2005-01-01

    The project on Personalisation of Self-service Solutions across On-line Platforms (POSS ON-LINE) focuses on users, clients, and self-service solutions. It is based on the understanding that clients and users are different and have different goals, and that self-service takes place in different co...... at the process of development. However, we lack methods to predict user behaviour without having to deal with huge amounts of data and data from both quantitative data as well as life world observations are required....... the client and the user. The system gathers data about the user, which enables the client to push information to the user. Personalisation enables graphic user interface design that is personalised and relevant to the individual user and invites the user to get access to information with less strain....... Personalisation of self-service solutions is promising and IT companies are experiencing an increase in the clients' demands. At the same time the development of solutions moves within a shorter and shorter time span. Hence the process of innovations is paced and there is an increasing need of new ways of looking...

  13. [Integrity].

    Science.gov (United States)

    Gómez Rodríguez, Rafael Ángel

    2014-01-01

    To say that someone possesses integrity is to claim that that person is almost predictable about responses to specific situations, that he or she can prudentially judge and to act correctly. There is a closed interrelationship between integrity and autonomy, and the autonomy rests on the deeper moral claim of all humans to integrity of the person. Integrity has two senses of significance for medical ethic: one sense refers to the integrity of the person in the bodily, psychosocial and intellectual elements; and in the second sense, the integrity is the virtue. Another facet of integrity of the person is la integrity of values we cherish and espouse. The physician must be a person of integrity if the integrity of the patient is to be safeguarded. The autonomy has reduced the violations in the past, but the character and virtues of the physician are the ultimate safeguard of autonomy of patient. A field very important in medicine is the scientific research. It is the character of the investigator that determines the moral quality of research. The problem arises when legitimate self-interests are replaced by selfish, particularly when human subjects are involved. The final safeguard of moral quality of research is the character and conscience of the investigator. Teaching must be relevant in the scientific field, but the most effective way to teach virtue ethics is through the example of the a respected scientist.

  14. On-line Resources for Teaching Sustainability

    Science.gov (United States)

    Bruckner, M. Z.; Larsen, K.; Buhr, S. M.; Kirk, K. B.; Ledley, T. S.; Manduca, C. A.; Mogk, D. W.; Savina, M. E.; Tewksbury, B. J.

    2012-12-01

    Sustainability encompasses broad interdisciplinary topics such as climate change, agricultural food production, and water resource use that include both scientific and societal components. Today's students will need to learn how to address complex, interdisciplinary, sustainability-related challenges throughout their lives. To support faculty in teaching complex concepts in sustainability to undergraduates, the Science Education Resource Center (SERC) now provides integrated access to all resources on teaching sustainability developed by projects hosted on SERC websites. Drawing extensively from collections developed by On the Cutting Edge: Professional Development for Geoscience Faculty, InTeGrate: Interdisciplinary Teaching of Geoscience for a Sustainable Future, the Climate Literacy and Energy Awareness Network (CLEAN), as well as more than 10 smaller projects, these resources include browsable access to (1) over 120 course descriptions submitted by faculty that provide information about course goals, assessments, and syllabi used in teaching courses with a sustainability focus, (2) over 160 faculty-submitted descriptions of activities that can be used to incorporate and address sustainability concepts, and (3) more than 90 interdisciplinary essays that highlight how faculty incorporate sustainability concepts into their teaching. The Sustainability Portal additionally includes several collections of lessons focused on a central theme, such as carbon footprint exercises and materials for teaching about energy that incorporate quantitative skills. The Sustainability Portal provides access to information about incorporating sustainability issues into geoscience courses and examples of how these concepts can be taught for topics such as geology and human health, public policy and Earth science, complex systems, urban students and urban environments, energy, and climate change. A rich collection of innovative pedagogical approaches conducive to teaching about

  15. On-line interprofessional learning: introducing constructivism through enquiry-based learning and peer review.

    Science.gov (United States)

    Hughes, Matthew; Ventura, Susie; Dando, Mark

    2004-08-01

    Interest in on-line methods of learning has accelerated in recent years. There has also been an interest in developing student-centred approaches to learning and interprofessional education. This paper illustrates the issues in designing a large (more than 700 students), on-line, inter-professional module for third year, undergraduate students drawn from nine professional healthcare courses and from four campus sites. It uses an enquiry-based learning approach. The learning theories of Piaget, Vygotsky and Schön are integrated with the on-line frameworks of Salmon and Collis et al., together with conclusions drawn from the literature and our own experiences, to produce a design that encourages students to learn through participation, re-iteration, peer-review and reflection. Consideration is given to improving student motivation and attitudes towards change, both in the design and the delivery of the module.

  16. AMADEUS on-line trigger and filtering methods

    Energy Technology Data Exchange (ETDEWEB)

    Neff, M. [Erlangen Centre for Astroparticle Physics (ECAP), Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Physikalisches Institut, Erwin-Rommel-Strasse 1, D-91058 Erlangen (Germany)], E-mail: max.neff@physik.uni-erlangen.de; Anton, G.; Graf, K.; Hoessl, J.; Katz, U.; Lahmann, R.; Richardt, C. [Erlangen Centre for Astroparticle Physics (ECAP), Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Physikalisches Institut, Erwin-Rommel-Strasse 1, D-91058 Erlangen (Germany)

    2009-06-01

    AMADEUS is a system designed to investigate the method of acoustic particle detection for high energy neutrinos and the acoustic environment in the deep sea as part of the ANTARES neutrino telescope. In this context, six local clusters of six acoustic sensors each were integrated into the ANTARES infrastructure. The first three clusters have been taking data since December 2007 and the second three since the completion of ANTARES in May 2008. In the paper, the methods used for the on-line triggering and filtering of the data acquired with the AMADEUS set-up are described. On-shore, a dedicated computer-cluster is used to control the off-shore DAQ hardware, to process and store the acoustic data arriving from the sensors. On this cluster different data filtering schemes and triggers are implemented. Transient signals are selected by a variable threshold, which is self-adjusting to the changing conditions of the deep sea. For bipolar pulses-the characteristic acoustic signature of a neutrino-a pattern recognition is used based on cross-correlating the output of the sensors with a pre-defined bipolar pulse. To study the characteristics of the ambient noise in the deep sea an amount of unfiltered data is stored in regular intervals.

  17. On-line range images registration with GPGPU

    Science.gov (United States)

    Będkowski, J.; Naruniec, J.

    2013-03-01

    This paper concerns implementation of algorithms in the two important aspects of modern 3D data processing: data registration and segmentation. Solution proposed for the first topic is based on the 3D space decomposition, while the latter on image processing and local neighbourhood search. Data processing is implemented by using NVIDIA compute unified device architecture (NIVIDIA CUDA) parallel computation. The result of the segmentation is a coloured map where different colours correspond to different objects, such as walls, floor and stairs. The research is related to the problem of collecting 3D data with a RGB-D camera mounted on a rotated head, to be used in mobile robot applications. Performance of the data registration algorithm is aimed for on-line processing. The iterative closest point (ICP) approach is chosen as a registration method. Computations are based on the parallel fast nearest neighbour search. This procedure decomposes 3D space into cubic buckets and, therefore, the time of the matching is deterministic. First technique of the data segmentation uses accele-rometers integrated with a RGB-D sensor to obtain rotation compensation and image processing method for defining pre-requisites of the known categories. The second technique uses the adapted nearest neighbour search procedure for obtaining normal vectors for each range point.

  18. ON-LINE ELIMINATION OF OIL WHIP

    Institute of Scientific and Technical Information of China (English)

    Zheng Shuiying; Liu Shulian

    2005-01-01

    A new method to eliminate the oil whip online is put forward by use of passive electromagnetic damper. The damper works contactless and with DC current. Neither sensor nor closed loop control is needed. The dynamic equations of rotor-bearing system are built up by combining d'Alemdert principle with Rize way, and the nonlinear oil film forces based on unsteady short bearing model are coupled to system. Such nonlinear equations are numerically solved by Newmark integration method. The calculated results show that the bifurcation behavior of the system can be changed and the oil whip of the rotor may be well damped by external damping. The bifurcation diagrams also show that the subharmonic vibration amplitude decreases in motion and the speed at which the system losses its stability increases obviously by exerting external damping.Then experiments are carried out to demonstrate this phenomenon. It is observed that the complex trajectories of the journal motion are disappeared and the rotor-bearing system became stable when the power of passive electromagnetic damper is turned on. The experiments have good repeatability.

  19. A Novel Multi-Secret Sharing Approach for Secure Data Warehousing and On-Line Analysis Processing in the Cloud

    OpenAIRE

    Attasena, Varunya; Harbi, Nouria; Darmont, Jérôme

    2017-01-01

    Cloud computing helps reduce costs, increase business agility and deploy solutions with a high return on investment for many types of applications, including data warehouses and on-line analytical processing. However, storing and transferring sensitive data into the cloud raises legitimate security concerns. In this paper, we propose a new multi-secret sharing approach for deploying data warehouses in the cloud and allowing on-line analysis processing, while enforcing data privacy, integrity ...

  20. ON-LINE PREEMPTIVE SCHEDULING ON UNIFORM MACHINES

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yuzhong; WANG Shouyang; Bo Chen; ZHANG Shuxia

    2001-01-01

    We address the problem of preemptively schedule on-line jobs on arbitrary muniformly related machines with the objective of minimizing the schedule length. We provide the first on-line algorithm for this general problem, and show that the algorithm being the speeds of the m machines.

  1. From Off-line to On-line Handwriting Recognition

    NARCIS (Netherlands)

    Lallican, P.; Viard-Gaudin, C.; Knerr, S.

    2004-01-01

    On-line handwriting includes more information on time order of the writing signal and on the dynamics of the writing process than off-line handwriting. Therefore, on-line recognition systems achieve higher recognition rates. This can be concluded from results reported in the literature, and has been

  2. On-Line and Off-Line Assessment of Metacognition

    Science.gov (United States)

    Saraç, Seda; Karakelle, Sema

    2012-01-01

    The study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The…

  3. On-line characterization of a hybridoma cell culture process.

    Science.gov (United States)

    Zhou, W; Hu, W S

    1994-06-20

    The on-line determination of the physiological state of a cell culture process requires reliable on-line measurements of various parameters and calculations of specific rates from these measurements. The cell concentration of a hybridoma culture was estimated on-line by measuring optical density (OD) with a laser turbidity probe. The oxygen uptake rate (OUR) was determined by monitoring dynamically dissolved oxygen concentration profiles and closing oxygen balances in the culture. The base addition for neutralizing lactate produced by cells was also monitored on-line via a balance. Using OD and OUR measurements, the specific growth and specific oxygen consumption rates were determined on-line. By combining predetermined stoichiometric relationships among oxygen and glucose consumption and lactate production, the specific glucose consumption and lactate production rates were also calculated on-line. Using these on-line measurements and calculations, the hybridoma culture process was characterized on-line by identifying the physiological states. They will also facilitate the implementation of nutrient feeding strategies for fed-batch and perfusion cultures. (c) 1994 John Wiley & Sons, Inc.

  4. On-line optimal control of greenhouse crop cultivation.

    NARCIS (Netherlands)

    Straten, van G.

    1996-01-01

    Thus far, optimal control has primarily been investigated for seasonal crop growth optimization. On-line aspects have received much less attention. The decomposition between long term strategies and on-line control, however, is not trivial. Appreciable losses occur when set-points generated by seaso

  5. On-line optimal control of greenhouse crop cultivation.

    NARCIS (Netherlands)

    Straten, van G.

    1996-01-01

    Thus far, optimal control has primarily been investigated for seasonal crop growth optimization. On-line aspects have received much less attention. The decomposition between long term strategies and on-line control, however, is not trivial. Appreciable losses occur when set-points generated by seaso

  6. INTERACTIVE 3D LANDSCAPES ON LINE

    Directory of Open Access Journals (Sweden)

    B. Fanini

    2012-09-01

    Full Text Available The paper describes challenges identified while developing browser embedded 3D landscape rendering applications, our current approach and work-flow and how recent development in browser technologies could affect. All the data, even if processed by optimization and decimation tools, result in very huge databases that require paging, streaming and Level-of-Detail techniques to be implemented to allow remote web based real time fruition. Our approach has been to select an open source scene-graph based visual simulation library with sufficient performance and flexibility and adapt it to the web by providing a browser plug-in. Within the current Montegrotto VR Project, content produced with new pipelines has been integrated. The whole Montegrotto Town has been generated procedurally by CityEngine. We used this procedural approach, based on algorithms and procedures because it is particularly functional to create extensive and credible urban reconstructions. To create the archaeological sites we used optimized mesh acquired with laser scanning and photogrammetry techniques whereas to realize the 3D reconstructions of the main historical buildings we adopted computer-graphic software like blender and 3ds Max. At the final stage, semi-automatic tools have been developed and used up to prepare and clusterise 3D models and scene graph routes for web publishing. Vegetation generators have also been used with the goal of populating the virtual scene to enhance the user perceived realism during the navigation experience. After the description of 3D modelling and optimization techniques, the paper will focus and discuss its results and expectations.

  7. Development and Application of On-line Wind Power Risk Assessment System

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Because of the large-scale integration of wind power, the dynamic characteristics of power system have many uncertain effects. Based on deterministic analysis methods, traditional on-line security assessment system cannot quantitatively estimate the actual operating conditions of the power system for only considering the most serious and credible accidents. Therefore, the risk theory is introduced into an on-line security assessment system and then an on-line risk assessment dynamic security assessment system system for wind power is designed Based on multiple data integration, and implemented by combining with the the wind power disturbance probability is available and the security assessment of the power grid can obtain security indices in different aspects. The operating risk index is an expectation of severity, computed by summing up all the products of the result probability and its severity. Analysis results are reported to the dispatchers in on-line environment, while the comprehensive weak links are automatically provided to the power dispatching center. The risk assessment system in operation can verify the reasonableness of the system.

  8. Algorithms for semi on-line multiprocessor scheduling problems

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In the classical multiprocessor scheduling problems, it is assumed that the problems are considered in off-line or on-line environment. But in practice, problems are often not really off-line or on-line but somehow in between. This means that, with respect to the on-line problem, some further information about the tasks is available, which allows the improvement of the performance of the best possible algorithms. Problems of this class are called semi on-line ones. The authors studied two semi on-line multiprocessor scheduling problems, in which, the total processing time of all tasks is known in advance, or all processing times lie in a given interval. They proposed approximation algorithms for minimizing the makespan and analyzed their performance guarantee. The algorithms improve the known results for 3 or more processor cases in the literature.

  9. Innovative Way of Internet Voting - Secure On-line Vote - SOLV

    Directory of Open Access Journals (Sweden)

    Shalini Vermani

    2012-11-01

    Full Text Available With the rapid growth in Information Technology, internet voting system has been evolved. This is a web based system that must provide high level of security. In this paper we have proposed Secure On-line Vote (SOLV, an internet voting system. SOLV gives voters a reliable and highly secure environment to cast their vote on web. This system ensures authentication of voters and guarantees the secrecy and integrity of each vote.

  10. The Design of Partial Discharge On-Line Monitoring System for XLPE Power Cable

    OpenAIRE

    Chen Rui-Long; Qian Yong; Ye Hai-Feng; Sheng Ge-Hao; Jiang Xiu-Chen

    2013-01-01

    Partial discharge detection is an important means to assess the situation of XLPE power cable’s insulation. This study has developed an on-line monitoring system which applies to the medium voltage XLPE cable on partial discharge, described its working principle, components of hardware, software designing and program implementation in details. Through monitoring the partial discharge signal in grounding lines of the XLPE cable’s shield, the system integrated assess the situation of XLPE cable...

  11. On-line Autonomous Learning Based on Leamerg Expectation

    Institute of Scientific and Technical Information of China (English)

    李利娜

    2008-01-01

    On-line autonomous learning of College English is one of the important reforms in colleges recently.This paper aims to explore the changes of teachers'role in the new on-line setting.The article first reviews the theoretical study of learner autonomy,then makes a practical investigation into the attitude and expectation learners have on teachers through a self-designed questionnaire,and explores that teachers should make an adjustment to their role orientation and changes their roles into motivators,evaluators and resources supphers in the new on-line setting.

  12. On-line Classical Guitar Course: Blogs for Music Education

    OpenAIRE

    José Luis Navarro; Gilles Lavigne; G. Guadalupe Martínez Salgado

    2009-01-01

    This article introduces an on-line course constructed by means of a blog. The tool was the main goal of a research project titled “Develop, Implementation and evaluation of a Hybrid Course Face to face-On Line for Teaching the Beginning to Play the Classical Guitar”. This work was a three steep project in which it was implemented, applied and evaluated. The on-line course was intended to prepare the students to learn the basic principles to start in classical music with the guitar. The result...

  13. Understanding on-line community: the affordances of virtual space

    Directory of Open Access Journals (Sweden)

    Karen Ruhleder

    2002-01-01

    Full Text Available Increasing numbers of on-line venues for learning are emerging as virtual communities become more accessible and commonplace. This paper looks at one particular virtual community, an on-line degree programme at the University of Illinois, Urbana-Champaign, which offers an M.S. in Library and Information Science (called LEEP. It draws on a framework presented by Mynatt, et al. (1998, which provides a lens for talking about on-line community as a set of affordances. This framework is applied to illustrate the interactions, artefacts, and expectations that shape this community.

  14. On-Line Trajectory Retargeting for Alternate Landing Sites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Barron Associates, Inc. proposes to develop a novel on-line trajectory optimization approach for Reusable Launch Vehicles (RLVs) under failure scenarios, targeting...

  15. ON-LINE SCHEDULING WITH REJECTION ON IDENTICAL PARALLEL MACHINES

    Institute of Scientific and Technical Information of China (English)

    Cuixia MIAO; Yuzhong ZHANG

    2006-01-01

    In this paper, we consider the on-line scheduling of unit time jobs with rejection on m identical parallel machines. The objective is to minimize the total completion time of the accepted jobs plus the total penalty of the rejected jobs. We give an on-line algorithm for the problem with competitive ratio 1/2(2 + √3) ≈ 1.86602.

  16. From User Comments to On-line Conversations

    OpenAIRE

    Wang, Chunyan; Ye, Mao; Huberman, Bernardo A.

    2012-01-01

    We present an analysis of user conversations in on-line social media and their evolution over time. We propose a dynamic model that accurately predicts the growth dynamics and structural properties of conversation threads. The model successfully reconciles the differing observations that have been reported in existing studies. By separating artificial factors from user behaviors, we show that there are actually underlying rules in common for on-line conversations in different social media web...

  17. Directions for Future Research in On-line Distance Education

    OpenAIRE

    Alaa SADIK

    2015-01-01

    Although institutions have invested much in developing on-line environments or using already established commercial platforms, only few studies have been conducted to investigate the effectiveness of on-line courses based on empirical data (Jung and Rha, 2000). A review of the literature conducted in this study showed that most of online learning studies investigated the effectiveness of Web-based interaction or Internet conferencing on learning, not the entire learning environment. Even in t...

  18. An On-line Ferrograph for Monitoring Machine Wear

    Institute of Scientific and Technical Information of China (English)

    L(U) Xiao-jun; JING Min-qing; XIE You-bai

    2005-01-01

    In order to improve an on-line ferrograph, this paper simulates a three dimensional magnetic field distribution of an electromagnet, builds a sinking motion model of a wear particle, and investigates the motion law of wear particles under two different conditions. Both numeric results and experimental results show that the on-line ferrograph is capable of monitoring machine wear conditions by measuring the concentration and size distribution of wear particles in lubricating oil.

  19. Web Data Cube Construction in Multidimensional On-line Analytical Processing Environment

    Institute of Scientific and Technical Information of China (English)

    ZHU Yan

    2007-01-01

    This paper investigates how to integrate Web data into a multidimensional data warehouse (cube) for comprehensive on-line analytical processing (OLAP) and decision making. An approach for Web data-based cube construction is proposed, which includes Web data modeling based on MIX (Metadata based Integration model for data X-change), generic and specific mapping rules design, and a transformation algorithm for mapping Web data to a multidimensional array. Besides, the structure and implementation of the prototype of a Web data base cube are discussed.

  20. An agent architecture with on-line learning of both procedural and declarative knowledge

    Energy Technology Data Exchange (ETDEWEB)

    Sun, R.; Peterson, T.; Merrill, E. [Univ. of Alabama, Tuscaloosa, AL (United States)

    1996-12-31

    In order to develop versatile cognitive agents that learn in situated contexts and generalize resulting knowledge to different environments, we explore the possibility of learning both declarative and procedural knowledge in a hybrid connectionist architecture. The architecture is based on the two-level idea proposed earlier by the author. Declarative knowledge is represented symbolically, while procedural knowledge is represented subsymbolically. The architecture integrates reactive procedures, rules, learning, and decision-making in a unified framework, and structures different learning components (including Q-learning and rule induction) in a synergistic way to perform on-line and integrated learning.

  1. Digital signal processor-based high-precision on-line Voigt lineshape fitting for direct absorption spectroscopy.

    Science.gov (United States)

    Xu, Lijun; Liu, Chang; Zheng, Deyan; Cao, Zhang; Cai, Weiwei

    2014-12-01

    To realize on-line high-accuracy measurement in direct absorption spectroscopy (DAS), a system-on-chip, high-precision digital signal processor-based on-line Voigt lineshape fitting implementation is introduced in this paper. Given that the Voigt lineshape is determined by the Gauss full width at half maximum (FWHM) and Lorentz FWHM, a look-up table, which covers a range of combinations of both, is first built to achieve rapid and accurate calculation of Voigt lineshape. With the look-up table and raw absorbance data in hand, Gauss-Newton nonlinear fitting module is implemented to obtain the parameters including both the Gauss and Lorentz FWHMs, which can be used to calculate the integrated absorbance. To realize the proposed method in hardware, a digital signal processor (DSP) is adopted to fit the Voigt lineshape in a real-time DAS measurement system. In experiment, temperature and H2O concentration of a flat flame are recovered from the transitions of 7444.36 cm(-1) and 7185.6 cm(-1) by the DSP-based on-line Voigt lineshape fitting and on-line integral of the raw absorbance, respectively. The results show that the proposed method can not only fit the Voigt lineshape on-line but also improve the measurement accuracy compared with those obtained from the direct integral of the raw absorbance.

  2. On-line electrochemical measurements of cerebral hypoxanthine of freely moving rats

    Institute of Scientific and Technical Information of China (English)

    ZHANG ZiPin; LIN YuQing; MAO LanQun

    2009-01-01

    This study demonstrates an on-line method for continuous measurements of cerebral hypoxanthine in the freely moving rats with integration of selective electrochemical biosensing with in vivo microdialysis sampling. The selective electrochemical biosensing is achieved by using xanthine oxidase (XOD) as the specific sensing element and Prussian blue (PB) as the electrocatalyst for the reduction of H_2O_2 generated from the oxidase-catalyzed reaction. The method is virtually interference-free from the coexisting electroactive species in the brain and exhibits a good stability and reproducibility. Upon integrated with in vivo microdialysis, the on-line method is well suitable for continuous measurements of cerebral hypoxanthine of freely moving rats, which is illustrated by the measurements of the microdialysates after the hypoxanthine standard was externally infused into the rat brain. This study essen-tially offers a facile on-line electrochemical approach to continuous measurements of cerebral hypoxanthine and could find some interesting applications in physiological and pathological investigations associated with hypoxanthine.

  3. On-line electrochemical measurements of cerebral hypoxanthine of freely moving rats

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    This study demonstrates an on-line method for continuous measurements of cerebral hypoxanthine in the freely moving rats with integration of selective electrochemical biosensing with in vivo microdialysis sampling. The selective electrochemical biosensing is achieved by using xanthine oxidase (XOD) as the specific sensing element and Prussian blue (PB) as the electrocatalyst for the reduction of H2O2 generated from the oxidase-catalyzed reaction. The method is virtually interference-free from the co-existing electroactive species in the brain and exhibits a good stability and reproducibility. Upon integrated with in vivo microdialysis, the on-line method is well suitable for continuous measurements of cerebral hypoxanthine of freely moving rats, which is illustrated by the measurements of the microdi-alysates after the hypoxanthine standard was externally infused into the rat brain. This study essentially offers a facile on-line electrochemical approach to continuous measurements of cerebral hypoxanthine and could find some interesting applications in physiological and pathological investigations associated with hypoxanthine.

  4. Sport Management Taught On-Line: A Discussion

    Directory of Open Access Journals (Sweden)

    William F. Stier Jr

    2009-01-01

    Full Text Available An introduction to the world of on-line courses (distance education/learning is presented. In addition, the world of on-line learning, as it pertains to sport management, is examined within the framework of (a pedagogy, (b finances,(c assessment, and (d choosing to transition from the traditional classroom to on-line learning. Pertinent points relative to each of the four categories are presented from the literature. In an effort to stimulate thought and discussion to the subject of on-line learning for sport management programs/courses the authors provide their reactions to the literature points by presenting their comments/reactions from a sport management perspective. Sport management professors and administrators are encouraged to critically examine the feasibility of such on-line courses (distance education/learning within their own curricula while maintaining an appropriate framework revolving around sound theoretical instructional strategies, methods as well as appropriate use of instructional tools, including but not limited to, computersand the WWW.

  5. 'Integration'

    DEFF Research Database (Denmark)

    Olwig, Karen Fog

    2011-01-01

    After a long history dominated by out-migration, Denmark, Norway and Sweden have, in the past 50 years, become immigration societies. This article compares how these Scandinavian welfare societies have sought to incorporate immigrants and refugees into their national communities. It suggests that......, while the countries have adopted disparate policies and ideologies, differences in the actual treatment and attitudes towards immigrants and refugees in everyday life are less clear, due to parallel integration programmes based on strong similarities in the welfare systems and in cultural notions...... of equality in the three societies. Finally, it shows that family relations play a central role in immigrants’ and refugees’ establishment of a new life in the receiving societies, even though the welfare society takes on many of the social and economic functions of the family....

  6. On-line Payment System Survey – eCash

    Directory of Open Access Journals (Sweden)

    Marius Popa

    2009-12-01

    Full Text Available The paper presents the main aspects regarding an on-line payment system. Some characteristics of such system are presented and an existing system is analyzed. On its fundamental sense, the electronic commerce is a concept that represents the purchase and sale process or exchange of products, services, information, using o computer network, inclusively the Internet. In the most part of the cases, the electronic commerce imply on-line payments that lead to creation of some kinds of electronic money and some specific payment systems. There are described the some electronic payment mechanisms and the architecture and the functions of the on-line payment system E-Cash are depicted.

  7. A Hybrid On-line Verification Method of Relay Setting

    Science.gov (United States)

    Gao, Wangyuan; Chen, Qing; Si, Ji; Huang, Xin

    2017-05-01

    Along with the rapid development of the power industry, grid structure gets more sophisticated. The validity and rationality of protective relaying are vital to the security of power systems. To increase the security of power systems, it is essential to verify the setting values of relays online. Traditional verification methods mainly include the comparison of protection range and the comparison of calculated setting value. To realize on-line verification, the verifying speed is the key. The verifying result of comparing protection range is accurate, but the computation burden is heavy, and the verifying speed is slow. Comparing calculated setting value is much faster, but the verifying result is conservative and inaccurate. Taking the overcurrent protection as example, this paper analyses the advantages and disadvantages of the two traditional methods above, and proposes a hybrid method of on-line verification which synthesizes the advantages of the two traditional methods. This hybrid method can meet the requirements of accurate on-line verification.

  8. On-line laser spectroscopy with thermal atomic beams

    CERN Document Server

    Thibault, C; De Saint-Simon, M; Duong, H T; Guimbal, P; Huber, G; Jacquinot, P; Juncar, P; Klapisch, Robert; Liberman, S; Pesnelle, A; Pillet, P; Pinard, J; Serre, J M; Touchard, F; Vialle, J L

    1981-01-01

    On-line high resolution laser spectroscopy experiments have been performed in which the light from a CW tunable dye laser interacts at right angles with a thermal atomic beam. /sup 76-98/Rb, /sup 118-145 /Cs and /sup 208-213/Fr have been studied using the ionic beam delivered by the ISOLDE on-line mass separator at CERN while /sup 30-31/Na and /sup 38-47/K have been studied by setting the apparatus directly on-line with the PS 20 GeV proton beam. The principle of the method is briefly explained and some results concerning nuclear structure are given. The hyperfine structure, spins and isotope shifts of the alkali isotopes and isomers are measured. (8 refs).

  9. Strengthening weak ties through on-line gaming

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana Virginia; Kirchner, Kathrin

    On-line gaming became widespread in the last couple of years. The aim of the research presented in the paper is to figure out to what extent does game playing helps to strengthen weak ties and what additional factors influence this process. The approach is rather exploratory – some factors...... are grounded in theory, some are new. These factors are age, gender, place of origin, number of their Facebook connections (friends in Facebook terminology), the amount of time they are on Facebook, the amount of time they keep the Facebook site open, the amount of time they play on-line games, and the reasons...... for starting to play on-line games. Regarding the latter, we chose to focus only on escapist reasons....

  10. On-Line Voltage Stability Assessment based on PMU Measurements

    DEFF Research Database (Denmark)

    Garcia-Valle, Rodrigo; P. Da Silva, Luiz C.; Nielsen, Arne Hejde

    2009-01-01

    through statistic analysis. During the off-line analysis, a memory of high-risk situations following a pre-defined voltage stability criterion is obtained. Thereafter, basic statistics analyses are applied resulting in the definition of voltage regions. During on-line operation, voltage magnitudes......This paper presents a method for on-line monitoring of risk voltage collapse based on synchronised phasor measurement. As there is no room for intensive computation and analysis in real-time, the method is based on the combination of off-line computation and on-line monitoring, which are correlated...... of critical buses obtained by phasor measurements are monitored in relation to the risk regions. Comprehensive studies demonstrate that the proposed method could assist operators to avoid voltage collapse events, by taking preventive or emergency actions....

  11. On-line tribochemical strengthening of gear surface

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It has been found that under favorable friction conditions some antiwear elements inlubricating additives can permeate into subsurface of metal which can strengthens the friction sur-faces and improves anti-wear capacity of frication pairs. It is in many ways similar to chemical heattreatment. A new concept, technology of on-line strengthening, was logically put forward. Based oncurrent gear surface treatment technology, the on-line strengthen of gear surface is proposed. Itsdesign method is established. Based on it, the on-line strengthen of gear is achieved on CL-100gear test machine. A new method is put forward for strengthen treatment of gear surface. Andthree kinds of surface film were suggested.

  12. On-line Geoscience Data Resources for Today's Undergraduates

    Science.gov (United States)

    Goodwillie, A. M.; Ryan, W.; Carbotte, S.; Melkonian, A.; Coplan, J.; Arko, R.; O'Hara, S.; Ferrini, V.; Leung, A.; Bonckzowski, J.

    2008-12-01

    Broadening the experience of undergraduates can be achieved by enabling free, unrestricted and convenient access to real scientific data. With funding from the U.S. National Science Foundation, the Marine Geoscience Data System (MGDS) (http://www.marine-geo.org/) serves as the integrated data portal for various NSF-funded projects and provides free public access and preservation to a wide variety of marine and terrestrial data including rock, fluid, biology and sediment samples information, underway geophysical data and multibeam bathymetry, water column and multi-channel seismics data. Users can easily view the locations of cruise tracks, sample and station locations against a backdrop of a multi-resolution global digital elevation model. A Search For Data web page rapidly extracts data holdings from the database and can be filtered on data and device type, field program ID, investigator name, geographical and date bounds. The data access experience is boosted by the MGDS use of standardised OGC-compliant Web Services to support uniform programmatic interfaces. GeoMapApp (http://www.geomapapp.org/), a free MGDS data visualization tool, supports map-based dynamic exploration of a broad suite of geosciences data. Built-in land and marine data sets include tectonic plate boundary compilations, DSDP/ODP core logs, earthquake events, seafloor photos, and submersible dive tracks. Seamless links take users to data held by external partner repositories including PetDB, UNAVCO, IRIS and NGDC. Users can generate custom maps and grids and import their own data sets and grids. A set of short, video-style on-line tutorials familiarises users step- by-step with GeoMapApp functionality (http://www.geomapapp.org/tutorials/). Virtual Ocean (http://www.virtualocean.org/) combines the functionality of GeoMapApp with a 3-D earth browser built using the NASA WorldWind API for a powerful new data resource. MGDS education involvement (http://www.marine-geo.org/, go to Education tab

  13. Why do People Stop Playing On-Line Games?

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    The recent initial public offering of shares of Zynga, probably the most important on-line game provider, drew interest of potential investors but also of general public to their business model. What the most interested people learned so far is that if Zynga had not changed their accounting...... practice, they would be in red numbers for several months already. This is most likely caused by people stopping to play their games. This paper provides an estimate of what proportion of people, who played on-line games, already stopped playing them. Additionally, it analyzed the reasons why people...

  14. On-Line Generation of 3D-Waves

    DEFF Research Database (Denmark)

    Frigaard, Peter

    1992-01-01

    The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg.......The paper describes the technique of filtering white noise for on-line generation of 3D-waves on a small computer in the laboratory. The wave generation package is implemented and tested in the 3D-wave basin at the University of Aalborg....

  15. The User-friendly On-Line Diffusion Chamber

    CERN Document Server

    Aviles Acosta, Jaime

    2015-01-01

    The On-Line Diffusion Chamber is a stand-alone apparatus built to carry out short-live radiotracer diffusion studies. The availability of the on-demand production of isotopes in the ISOLDE facility, and the design of the apparatus to streamline the implantation process, annealing treatment, ion gun ablation with a tape transport system, and radiation intensity measurement with a Ge gamma detector all in the same apparatus, gives the On-Line Diffusion Chamber a unique ability to studies with short-lived radioisotopes or isomer states that are not possible in any other facility in the world.

  16. On-line measurement of heat of combustion

    Science.gov (United States)

    Chaturvedi, S. K.; Chegini, H.

    1988-01-01

    An experimental method for an on-line measurement of heat of combustion of a gaseous hydrocarbon fuel mixture of unknown composition is developed. It involves combustion of a test gas with a known quantity of air to achieve a predetermined oxygen concentration level in the combustion products. This is accomplished by a feedback controller which maintains the gas volumetric flow rate at a level consistent with the desired oxygen concentration in the products. The heat of combustion is determined from a known correlation with the gas volumetric flow rate. An on-line microcomputer accesses the gas volumetric flow data, and displays the heat of combustion values at desired time intervals.

  17. 5th Computer Science On-line Conference

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2016-01-01

    This volume is based on the research papers presented in the 5th Computer Science On-line Conference. The volume Artificial Intelligence Perspectives in Intelligent Systems presents modern trends and methods to real-world problems, and in particular, exploratory research that describes novel approaches in the field of artificial intelligence. New algorithms in a variety of fields are also presented. The Computer Science On-line Conference (CSOC 2016) is intended to provide an international forum for discussions on the latest research results in all areas related to Computer Science. The addressed topics are the theoretical aspects and applications of Computer Science, Artificial Intelligences, Cybernetics, Automation Control Theory and Software Engineering.

  18. Effect of translational and rotational errors on complex dose distributions with off-line and on-line position verification

    NARCIS (Netherlands)

    I.M. Lips; U.A. van der Heide; A.N.T.J. Kotte; M. van Vulpen; A. Bel

    2009-01-01

    PURPOSE: To investigate the influence of translational and rotational errors on prostate intensity-modulated radiotherapy (IMRT) with an integrated boost to the tumor and to evaluate the effect of the use of an on-line correction protocol. METHODS AND MATERIALS: For 19 patients, who had been treated

  19. Simple chip-based interfaces for on-line monitoring of supramolecular interactions by nano-ESI MS

    NARCIS (Netherlands)

    Brivio, M.; Oosterbroek, R.E.; Verboom, Willem; van den Berg, Albert; Reinhoudt, David

    2005-01-01

    Two simple interfaces were designed and realized, enabling on-line coupling of microfluidics reactor chips to a nanoflow electrospray ionization (NESI) time-of-flight (TOF) mass spectrometer (MS). The interfaces are based on two different approaches: a monolithically integrated design, in which

  20. Activated aluminum oxide selectively retaining long chain n-alkanes: Part II. Integration into an on-line high performance liquid chromatography-liquid chromatography-gas chromatography-flame ionization detection method to remove plant paraffins for the determination of mineral paraffins in foods and environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Fiselier, Katell [Official Food Control Authority of the Canton of Zurich, P.O. Box, CH-8032 Zurich (Switzerland); Fiorini, Dennis [Department of Chemical Sciences, University of Camerino, V.S. Agostino 1, I-62032, Camerino (Italy); Grob, Koni [Official Food Control Authority of the Canton of Zurich, P.O. Box, CH-8032 Zurich (Switzerland)], E-mail: koni@grob.org

    2009-02-16

    Aluminum oxide activated by heating to 300-400 deg. C retains n-alkanes with more than about 20 carbon atoms, whereas iso-alkanes largely pass non-retained (with characteristics described in more detail in Part I). This property is useful for the analysis of mineral oil contamination of foods and other matrices: it enables the removal of plant n-alkanes, typically ranging from C{sub 23} to C{sub 33}, when they disturb the analysis of mineral paraffins (usually almost exclusively consisting of iso-alkanes). An on-line HPLC-LC-GC-FID method is proposed in which a first silica gel HPLC column isolates the paraffins from the bulk of edible oils or extracts and is backflushed with dichloromethane. In a second separation step, a 10 cm x 2 mm i.d. column packed with activated aluminum oxide separates the long chain n-alkanes from the fraction of the iso-alkanes which is transferred to GC-FID by the on-column interface and the retention gap technique. The retained n-alkanes are removed by flushing with iso-octane.

  1. On-Line Learning and the Implications for School Design

    Science.gov (United States)

    Stack, Greg

    2011-01-01

    "Disrupting Class," published in 2008, is the story of how disruptive innovation, innovation that changes the business model organizations, will fundamentally change the American school system. The book's most startling prediction is that half of all high school classes will be on-line by 2019. In considering these predictions, the author began to…

  2. On-line multidimensional separation systems for peptide analysis

    NARCIS (Netherlands)

    Stroink, T.

    2005-01-01

    Today, there is an increasing interest in selective and sensitive analysis of proteins and peptides with a relatively high speed. The first chapter of this thesis describes several strategies for the on-line multidimensional analysis of peptides and proteins in biological samples. This overview of t

  3. On-line probabilistic classification with particle filters

    DEFF Research Database (Denmark)

    Højen-Sørensen, Pedro; de Freitas, N.; Fog, Torben L.

    2000-01-01

    We apply particle filters to the problem of on-line classification with possibly overlapping classes. This allows us to compute the probabilities of class membership as the classes evolve. Although we adopt neural network classifiers, the work can be extended to any other parametric classification...

  4. Personal Assistant for onLine Services: Addressing human factors

    NARCIS (Netherlands)

    Lindenberg, J.; Nagata, S.F.; Neerincx, M.A.

    2003-01-01

    The Personal Assistant for onLine Services (PALS) project aims at substantially improving the user experience of mobile internet services. It focuses on a generic solution: a personal assistant, which attunes the interaction to the momentary user needs and use context (e.g. adjusting the

  5. Developing an On-Line Interactive Health Psychology Module

    Science.gov (United States)

    Upton, Dominic; Cooper, Carol

    2006-01-01

    On-line teaching material in health psychology was developed which ensured a range of students could access appropriate material for their course and level of study. This material has been developed around the concept of smaller "content chunks" which can be combined into whole units of learning (topics), and ultimately, a module. On the basis of…

  6. Why do People Stop playing On-Line Games?

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    The recent initial public offering of shares of Zynga, probably the most important on-line game provider, drew interest of potential investors but also of general public to their business model. What the most interested people learned so far is that if Zynga had not changed their accounting...

  7. On-line fuzzy logic control of tube bending

    Science.gov (United States)

    Lieh, Junghsen; Li, Wei Jie

    2005-11-01

    This paper describes the simulation and on-line fuzzy logic control of tube bending. By combining elasticity and plasticity theories, a conventional model was developed. The results from simulation were compared with those obtained from testing. The experimental data reveal that there exists certain level of uncertainty and nonlinearity in tube bending, and its variation could be significant. To overcome this, a on-line fuzzy logic controller with self-tuning capabilities was designed. The advantages of this on-line system are (1) its computational requirement is simple in comparison with more algorithmic-based controllers, and (2) the system does not need prior knowledge of material characteristics. The device includes an AC motor, a servo controller, a forming mechanism, a 3D optical sensor, and a microprocessor. This automated bending machine adopts primary and secondary errors between the actual response and desired output to conduct on-line rule reasoning. Results from testing show that the spring back angle can be effectively compensated by the self- tuning fuzzy system in a real-time fashion.

  8. The dynamics of on-line principal component analysis

    NARCIS (Netherlands)

    Biehl, M.; Schlösser, E.

    1998-01-01

    The learning dynamics of an on-line algorithm for principal component analysis is described exactly in the thermodynamic limit by means of coupled ordinary differential equations for a set of order parameters. It is demonstrated that learning is delayed significantly because existing symmetries amon

  9. On-Line Learning and the Implications for School Design

    Science.gov (United States)

    Stack, Greg

    2011-01-01

    "Disrupting Class," published in 2008, is the story of how disruptive innovation, innovation that changes the business model organizations, will fundamentally change the American school system. The book's most startling prediction is that half of all high school classes will be on-line by 2019. In considering these predictions, the author began to…

  10. Specialization processes in on-line unsupervised learning

    NARCIS (Netherlands)

    Biehl, M.; Freking, A.; Reents, G.; Schlösser, E.

    1998-01-01

    From the recent analysis of supervised learning by on-line gradient descent in multilayered neural networks it is known that the necessary process of student specialization can be delayed significantly. We demonstrate that this phenomenon also occurs in various models of unsupervised learning. A sol

  11. On-line sample treatment - Capillary gas chromatography

    NARCIS (Netherlands)

    Goosens, EC; de Jong, D; de Jong, GJ; Brinkman, UAT

    1998-01-01

    Sample pretreatment is often the bottleneck of a trace level analytical procedure. In order to increase performance, increasing attention is therefore being devoted to combining sample pretreatment on-line with the separation technique that has to be used. In the present review, a variety of procedu

  12. A New On-Line Resource for Psycholinguistic Studies

    Science.gov (United States)

    Szekely, Anna; Jacobsen, Thomas; D'Amico, Simona; Devescovi, Antonella; Andonoa, Elena; Herron, Daniel; Lu, Ching Ching; Pechmann, Thomas; Pleh, Csaba; Wicha, Nicole; Federmeier, Kara; Gerdjikova, Irina; Gutierrez, Gabriel; Hung, Daisy, Hsu, Jeanne; Iyer, Gowri; Kohnert, Kathryn; Mehotcheva, Teodora; Orozco-Figueroa, Araceli; Tzeng, Angela; Tzeng, Ovid; Arevalo, Analia; Vargha, Andras; Butler, Andrew C.; Buffington, Robert; Bates, Elizabeth

    2004-01-01

    Picture naming is a widely used technique in psycholinguistic studies. Here, we describe new on-line resources that our project has compiled and made available to researchers on the world wide web at http://crl.ucsd.edu/~aszekely/ipnp/. The website provides access to a wide range of picture stimuli and related norms in seven languages. Picture…

  13. ADAPTIVE CONTEXT PROCESSING IN ON-LINE HANDWRITTEN CHARACTER RECOGNITION

    NARCIS (Netherlands)

    Iwayama, N.; Ishigaki, K.

    2004-01-01

    We propose a new approach to context processing in on-line handwritten character recognition (OLCR). Based on the observation that writers often repeat the strings that they input, we take the approach of adaptive context processing. (ACP). In ACP, the strings input by a writer are automatically

  14. The Lesson Observation On-Line (Evidence Portfolio) Platform

    Science.gov (United States)

    Cooper, David G.

    2015-01-01

    At a time when teacher training is being moved to school-based programmes it is important to engage in a research-informed dialogue about creating more distinctive, and cost-effective 21st century models of teacher training. Three years ago I began feasibility field testing the Lesson Observation On-line (Evidence Portfolio) Platform [LOOP]…

  15. On-line EM algorithm for the normalized gaussian network.

    Science.gov (United States)

    Sato, M; Ishii, S

    2000-02-01

    A normalized gaussian network (NGnet) (Moody & Darken, 1989) is a network of local linear regression units. The model softly partitions the input space by normalized gaussian functions, and each local unit linearly approximates the output within the partition. In this article, we propose a new on-line EMalgorithm for the NGnet, which is derived from the batch EMalgorithm (Xu, Jordan, &Hinton 1995), by introducing a discount factor. We show that the on-line EM algorithm is equivalent to the batch EM algorithm if a specific scheduling of the discount factor is employed. In addition, we show that the on-line EM algorithm can be considered as a stochastic approximation method to find the maximum likelihood estimator. A new regularization method is proposed in order to deal with a singular input distribution. In order to manage dynamic environments, where the input-output distribution of data changes over time, unit manipulation mechanisms such as unit production, unit deletion, and unit division are also introduced based on probabilistic interpretation. Experimental results show that our approach is suitable for function approximation problems in dynamic environments. We also apply our on-line EM algorithm to robot dynamics problems and compare our algorithm with the mixtures-of-experts family.

  16. On-Line Synthesis and Analysis by Mass Spectrometry

    Science.gov (United States)

    Bain, Ryan M.; Pulliam, Christopher J.; Raab, Shannon A.; Cooks, R. Graham

    2015-01-01

    In this laboratory experiment, students learn how to use ESI to accelerate chemical synthesis and to couple it with on-line mass spectrometry for structural analysis. The Hantzsch synthesis of symmetric 1,4-dihydropyridines is a classic example of a one-pot reaction in which multiple intermediates can serve to indicate the progress of the reaction…

  17. Investigating on-line pornography at the University of Johannesburg

    Directory of Open Access Journals (Sweden)

    P. Laughton

    2008-01-01

    Full Text Available The on-line user of today has access to a vast collection of information resources. In addition, the developments in Internet and Web technologies have made it even easier for surfers to anonymously get access to on-line pornography. The purpose of this research was to investigate the extent to which access to on-line pornography at the University of Johannesburg can be managed. For the empirical part of this research 1037 questionnaires were proportionally distributed to and completed by students on all five campuses of the university. The questionnaire consisted of four sections: biographical information; university computer facility usage; university acceptable use policy; and personal experience with university computer facilities. The gender distribution for the sample was almost even, with a total of 49,4% male participants and 50,6% female, with the largest grouping of respondents (61,6% aged between 19 years and 21 years. Of the respondents, 36,7% indicated that exposure to unsolicited pornography did not bother them. When asked to what extent students should have access to pornography, 60,5% stated 'None' while 32,6% believed that 'Restricted' access should be granted for research purposes and 6,9% believed that students should be granted 'Total' access to pornography. Results from the research will be used to manage access to on-line resources at the University of Johannesburg better.

  18. Investigating on-line pornography at the University of Johannesburg

    Directory of Open Access Journals (Sweden)

    P. Laughton

    2007-12-01

    Full Text Available The on-line user of today has access to a vast collection of information resources. In addition, the developments in Internet and Web technologies have made it even easier for surfers to anonymously get access to on-line pornography. The purpose of this research was to investigate the extent to which access to on-line pornography at the University of Johannesburg can be managed. For the empirical part of this research 1037 questionnaires were proportionally distributed to and completed by students on all five campuses of the university. The questionnaire consisted of four sections: biographical information; university computer facility usage; university acceptable use policy; and personal experience with university computer facilities. The gender distribution for the sample was almost even, with total of 49,4% male participants and 50,6% female, with the largest grouping of respondents(61,6% aged between 19 years and 21 years. Of the respondents, 36,7% indicated that exposure to unsolicited pornography did not bother them. When asked to what extent students should have access to pornography, 60,5% stated 'None' while 32,6% believed that 'Restricted' access should be granted for research purposes and 6,9% believed that students should be granted 'Total' access to pornography. Results from the research will be used to manage access to on-line resources at the University of Johannesburg better.

  19. On-Line Synthesis and Analysis by Mass Spectrometry

    Science.gov (United States)

    Bain, Ryan M.; Pulliam, Christopher J.; Raab, Shannon A.; Cooks, R. Graham

    2015-01-01

    In this laboratory experiment, students learn how to use ESI to accelerate chemical synthesis and to couple it with on-line mass spectrometry for structural analysis. The Hantzsch synthesis of symmetric 1,4-dihydropyridines is a classic example of a one-pot reaction in which multiple intermediates can serve to indicate the progress of the reaction…

  20. Why do People Stop Playing On-Line Games?

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    2012-01-01

    The recent initial public offering of shares of Zynga, probably the most important on-line game provider, drew interest of potential investors but also of general public to their business model. What the most interested people learned so far is that if Zynga had not changed their accounting...

  1. On-line survivable routing in WDM networks

    NARCIS (Netherlands)

    Beshir, A.A.; Kuipers, F.A.; Van Mieghem, P.F.A.; Orda, A.

    2009-01-01

    In WDM networks, survivable routing and wavelength assignment (SRWA) involves assigning link-disjoint primary and backup lightpaths. In the on-line SRWA problem, a sequence of requests arrive and each request is either accepted or rejected based only on the input sequence seen so far. For special

  2. On-line Survivable Routing in WDM Networks

    NARCIS (Netherlands)

    Beshir, A.A.; Kuipers, F.A.; Van Mieghem, P.; Orda, A.

    In WDM networks, survivable routing and wavelength assignment (SRWA) involves assigning link-disjoint primary and backup lightpaths. In the on-line SRWA problem, a sequence of requests arrive and each request is either accepted or rejected based only on the input sequence seen so far. For special

  3. Mentoring Narratives ON-LINE:Teaching the Principalship

    Directory of Open Access Journals (Sweden)

    Allison I. Griffith

    2002-05-01

    Full Text Available The need to develop new models for preparation of school administrators has been a prominent concern in educational discourse in the last decade. Having been criticized for the inadequate preparation of the school leadership cadre, academic departments responsible for training future school administrators have had to revisit their approaches and to reframe their teaching philosophies to ensure the readiness of their graduates for the challenges and complexities of school leadership. This article reports on the new model of principals' training that has been used in York University's Principals' Qualification Program (PQP from the late 1990s onward. One component of the program brings traditional case methodology into a computer-mediated/on-line environment. The on-line cases are narratives from the everyday lives of the Ontario school administrators who serve as mentors in the on-line environment. Situating our discussion within the context of the rapidly changing educational landscape of Ontario, we focus on the PQP model to explore experientially generated case narratives as one method for teaching and learning the work of the local school administrator. We focus particularly on the teaching and learning embedded in computer-mediated or on-line case narratives used in training teachers for school leadership. We argue that the complexities of school leadership—the social, cultural, relational, ethical and moral context of school leadership—can be taught effectively through the reflective processes of on-line case narratives. We seek to contribute to the ongoing dialogue on the potential of new pedagogies and new technologies to help prepare the competent and responsible leaders for tomorrow's schools.

  4. Feasibility study of on-line digital X-ray imaging for irradiated fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Parthoens, Y.; Gys, A. [Reactor Material Research Department, SCK-CEN, Mol (Belgium); Smolders, V. [Industrial Engineer Department, Katholieke Hogeschool Kempen, Geel (Belgium)

    2003-07-01

    At the Reactor Material Research Department of the Belgian Nuclear Research Centre SCK-CEN Xray imaging of the internal parts of irradiated fuel rods is done on silver-halide films using a 420 kV X-ray source. The replacement of the films by an on-line digital X-ray imaging system implies several advantages. Images can be evaluated instantly and source parameters can be optimized more easily. Time consuming film development is superfluous. The images can digitally be enhanced, processed, reported and archived. Within this work the feasibility of four commercial on-line digital X-ray imaging systems were studied for post-irradiation examination on fuel rods in a hot cell environment. The criteria to evaluate the systems were image quality, integration in the existing hot cell infrastructure, durability and cost price. For the evaluation and comparison of the image quality a simulation fuel rod was fabricated. Three systems suffered from lack of sensitivity, contrast and/or resolution. Only the CsI-scintillator coupled to a CCD-camera with image intensifier gave a sufficient image quality. On the other hand the image intensifiers' dimensions are difficult to integrate in the existing hot cell infrastructure. Also the durability of intensifier screens is questionable as they are susceptible to image burn. Smaller image intensifiers easier to integrate are commercial available nowadays.

  5. On Line Disaster Response Community: People as Sensors of High Magnitude Disasters Using Internet GIS

    Directory of Open Access Journals (Sweden)

    Kris Kodrich

    2008-05-01

    Full Text Available The Indian Ocean tsunami (2004 and Hurricane Katrina (2005 reveal the coming of age of the on-line disaster response community. Due to the integration of key geospatial technologies (remote sensing - RS, geographic information systems - GIS, global positioning systems – GPS and the Internet, on-line disaster response communities have grown. They include the traditional aspects of disaster preparedness, response, recovery, mitigation, and policy as facilitated by governmental agencies and relief response organizations. However, the contribution from the public via the Internet has changed significantly. The on-line disaster response community includes several key characteristics: the ability to donate money quickly and efficiently due to improved Internet security and reliable donation sites; a computer-savvy segment of the public that creates blogs, uploads pictures, and disseminates information – oftentimes faster than government agencies, and message boards to create interactive information exchange in seeking family members and identifying shelters. A critical and novel occurrence is the development of “people as sensors” - networks of government, NGOs, private companies, and the public - to build rapid response databases of the disaster area for various aspects of disaster relief and response using geospatial technologies. This paper examines these networks, their products, and their future potential.

  6. State-of-the-art steam generator on-line chemistry monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Mac Koul, L.J.; Mc Clendon, M.E.; Richards, J.E.; Wozniak, S.M.

    1986-04-01

    Recent understanding of corrosion mechanisms has changed the industry's approach to one of establishing and maintaining proper water chemistry conditions to increase steam generator life and availability. A rigorous sampling and analysis program, along with management's commitment to proper water chemistry, are integral to the success of this approach. This paper describes Virginia Power's recent commitment to better maintenance of secondary side water chemistry conditions at its nuclear power stations through an on-line, comprehensive, state-of-the-art chemistry monitoring system.

  7. Implementation of standardized nursing languages (NIC, NOC) in on-line care planning and documentation.

    Science.gov (United States)

    Prophet, C M; Dorr, G G; Gibbs, T D; Porcella, A A

    1997-01-01

    At the University of Iowa Hospitals and Clinics (UIHC), the Standardized Nursing Languages (SNLs) of Nursing Interventions Classification (NIC) and Nursing-sensitive Outcomes Classification (NOC) are being implemented in on-line care planning and documentation. NIC and NOC are being integrated in the INFORMM NIS (Information Network For Retrieval & Medical Management Nursing Information System). The implementation process for SNLs includes six components: objectives, programming, database content, education, utilization, and evaluation. This process has been used successfully in NIC implementation and will be applied in NOC field testing.

  8. On-line parameter and delay estimation of continuous-time dynamic systems

    Directory of Open Access Journals (Sweden)

    Kozłowski Janusz

    2015-06-01

    Full Text Available The problem of on-line identification of non-stationary delay systems is considered. The dynamics of supervised industrial processes are usually modeled by ordinary differential equations. Discrete-time mechanizations of continuous-time process models are implemented with the use of dedicated finite-horizon integrating filters. Least-squares and instrumental variable procedures mechanized in recursive forms are applied for simultaneous identification of input delay and spectral parameters of the system models. The performance of the proposed estimation algorithms is verified in an illustrative numerical simulation study.

  9. The Design of Partial Discharge On-Line Monitoring System for XLPE Power Cable

    Directory of Open Access Journals (Sweden)

    Chen Rui-Long

    2013-09-01

    Full Text Available Partial discharge detection is an important means to assess the situation of XLPE power cable’s insulation. This study has developed an on-line monitoring system which applies to the medium voltage XLPE cable on partial discharge, described its working principle, components of hardware, software designing and program implementation in details. Through monitoring the partial discharge signal in grounding lines of the XLPE cable’s shield, the system integrated assess the situation of XLPE cable’s insulation. The results of running show that the system is stable and reliable.

  10. Astronomy On-Line Programme Enters "hot Week"

    Science.gov (United States)

    1996-11-01

    World's Biggest Astronomy WWW-Event Attracts Thousands of Students The Astronomy On-line Programme (See ESO Press Release 09/96 of 18 June 1996) began officially on 1 October and is now about to enter its most intense phase, known as the Hot Week . On 18 - 22 November, an estimated 4000 astronomy-interested, mostly young people in Europe and on four other continents will get together during five days in what - not unexpected - has become the world's biggest astronomy event ever organised on the World Wide Web. This carefully structured Programme is carried out in collaboration between the European Association for Astronomy Education (EAAE), the European Southern Observatory and the European Commission, under the auspices of the Fourth European Week for Scientific and Technological Culture. The Programme has already had a most visible impact on the school education of natural sciences in various countries; for instance, the Internet-connection of schools has been advanced in some, in order to allow groups to participate. There have been numerous contacts among the groups across the borders and there are clear signs that many Astronomy On-line participants have progressed to use the impressive possibilities of the Web in an efficient and structured way. There has been a lively media interest in Astronomy On-line all over Europe and it is expected to increase during the next week. The current status of Astronomy On-line It is obvious that the pilot function of the Astronomy On-line Programme in the use of the Web has been very effective and that the associated dissemination of astronomical knowledge has been successful. At this time, more than 650 groups have registered with Astronomy On-line. Most come from 31 different European countries and a few dozen groups are located in North and South America as well as in Asia and Australia. Together they have experienced the steady build-up of Astronomy On-line over the past weeks, by means of numerous contributions from a

  11. On-line Measuring Method for Shell Chamber Volume

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li-zhong; WANG De-min; JIANG Tao; CAO Guo-hua; WANG Qi

    2005-01-01

    Using the ideal gas state equation, an on-line measuring method for the shell chamber volume is studied in this paper. After analyzing how various measurement parameters affect the measurement accuracy, the system parameters are optimized in this method. Because the shape and volume of the tested items are similar, the method of using "tamping" to raise the accuracy and speed of the measurement is put forward. Based on the work above, a prototype of the testing instrument for shell chamber volume was developed, automatically testing and controlling. Compared with the method of "water weight", this method is more accurate, quicker and more automotive, so it is adaptable for the use of on-line detection.

  12. On-line Dynamic Security Assessment in Power Systems

    DEFF Research Database (Denmark)

    Weckesser, Johannes Tilman Gabriel

    tools may no longer be feasible, since they are generally based on extensive off-line studies. A core component of an efficient on-line dynamic security assessment is a fast and reliable contingency screening. As part of this thesis a contingency screening method is developed and its performance......The thesis concerns the development of tools and methods for on-line dynamic security assessment (DSA). In a future power system with low-dependence or even independence of fossil fuels, generation will be based to a large extent on noncontrollable renewable energy sources (RES), such as wind...... and solar radiation. Moreover, ongoing research suggests that demand response will be introduced to maintain power balance between generation and consumption at all times. Due to these changes the operating point of the power system will be less predictable and today’s stability and security assessment...

  13. On-line Ramsey Numbers for Paths and Stars

    Directory of Open Access Journals (Sweden)

    Jaroslaw Grytczuk

    2008-08-01

    Full Text Available We study on-line version of size-Ramsey numbers of graphs defined via a game played between Builder and Painter: in one round Builder joins two vertices by an edge and Painter paints it red or blue. The goal of Builder is to force Painter to create a monochromatic copy of a fixed graph H in as few rounds as possible. The minimum number of rounds (assuming both players play perfectly is the on-line Ramsey number r(H of the graph H. We determine exact values of r(H for a few short paths and obtain a general upper bound r(Pn ≤ 4n-7. We also study asymmetric version of this parameter when one of the target graphs is a star Sn with n edges. We prove that r(Sn,H≤n ·e(H when H is any tree, cycle or clique.

  14. On-line corrosion monitoring in district heating systems

    DEFF Research Database (Denmark)

    Richter, Sonja; Thorarinsdottir, R.I.; Hilbert, Lisbeth Rischel

    2004-01-01

    complicates the chemistry of the environment. Hydrogen sulphide is present in geothermal systems and can be formed as a by-product of sulphate-reducing-bacteria (SRB). The application of electrochemical methods makes on-line monitoring possible. These methods include: Linear Polarization Resistance (LPR......), Electrochemical Noise (EN) and Zero Resistance Ammetry (ZRA). Electrochemical Resistance (ER) has also been used to measure corrosion. The method traditionally only measures corrosion off-line but with newly developed high-sensitive ER technique developed by MetriCorr in Denmark, on-line monitoring is possible......Traditionally corrosion monitoring in district heating systems has been performed offline via weight loss coupons. These measurements give information about the past and not the present situation and require long exposure time (weeks or months). The good quality of district heating medium makes...

  15. Fractal groups: Emergent dynamics in on-line learning communities

    Directory of Open Access Journals (Sweden)

    Junia de Carvalho Fidelis Braga

    Full Text Available Drawing on complexity theory, this work discusses the complex dynamics and emergent patterns of on-line learning communities based on a doctoral study in the area of Applied Linguistics. The analysis will center on the interlocutions of fifty students who interacted in small groups without the teacher's direct intervention, in an undergraduate course offered by the School of Languages and Literature at the Federal University of Minas Gerais. By analyzing the data, I demonstrate that out of the interactions among the peers of autonomous on-line learning communities arise opportunities for the construction of shared meaning, distributed leadership, as well as other dynamics. I also demonstrate the fractal nature of these communities. Moreover, I discuss how these findings shed light on the creation and development of course designs for large groups.

  16. On-Line Metrology with Conoscopic Holography: Beyond Triangulation

    Science.gov (United States)

    Álvarez, Ignacio; Enguita, Jose M.; Frade, María; Marina, Jorge; Ojea, Guillermo

    2009-01-01

    On-line non-contact surface inspection with high precision is still an open problem. Laser triangulation techniques are the most common solution for this kind of systems, but there exist fundamental limitations to their applicability when high precisions, long standoffs or large apertures are needed, and when there are difficult operating conditions. Other methods are, in general, not applicable in hostile environments or inadequate for on-line measurement. In this paper we review the latest research in Conoscopic Holography, an interferometric technique that has been applied successfully in this kind of applications, ranging from submicrometric roughness measurements, to long standoff sensors for surface defect detection in steel at high temperatures. PMID:22399984

  17. Escapist Motives for Playing On-Line Games

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    , Harteveld and Mayer’s framework (2009) of escapist motives, which identifies four main motives for playing on-line games: mundane breaking, stress relieving, pleasure seeking, and imagination conjuring. In the paper, we report preliminary findings from an exploratory questionnaire survey. Besides importance...... of escapist motives for playing Facebook and other on-line games, we investigate how they are linked to demographic data such as: age, gender, place of origin, along with other social interactions patterns and social network usage behavior, current gaming status and an estimate of gaming time. According......Social games have become popular along with the tremendous growth of social networking sites, esp. Facebook. There is a gap in literature on what motivates people to play Facebook games. This paper studies social games usage behavior of students. We focus on escapist reasons, based on Warmelink...

  18. On-line Corrosion Monitoring in District Heating Systems

    DEFF Research Database (Denmark)

    Richter, Sonja; Thorarinsdottir, R.I.; Hilbert, Lisbeth Rischel

    2005-01-01

    The corrosion control in district heating systems is today performed primarily with control of the water quality. The corrosion rate is kept low by assuring low dissolved oxygen concentration, high pH and low conductivity. Corrosion failures can occur, e.g. as a result of unknown oxygen ingress......, precipitation of deposits or crevices. The authors describe methods used for on-line monitoring of corrosion, cover the complications and the main results of a Nordic project....

  19. On-Line and Back at S.F.U.

    Directory of Open Access Journals (Sweden)

    M. Sanderson

    1973-06-01

    Full Text Available Simon Fraser University library began operation with an automated circulation system. After deliberation, it mounted the first phase of a two-phase online circulation system. A radically revised loan pol·icy caused the system design and assumptions to be called into question. A cheaper, simpler, and more effective off-line system eventually replaced the on-line system. The systems, fiscal, and administrative implications of this decision are reviewed.

  20. Two Types of Designs for On-Line Circulation Systems

    Directory of Open Access Journals (Sweden)

    Rob McGee

    1972-09-01

    Full Text Available On-line circulation systems divide into two types. One type contains records only for charged or otherwise absent items. The other contains a file of records for all titles or volumes in the library collection, regardless of their circulation status. This paper traces differences between the two types, examining different kinds of files and terminals, transaction evidence, the quality of bibliographic data, querying, and the possibility of functions outside circulation. Aspects of both operational and potential systems are considered.

  1. Differential Electronic Nose in On-Line Dynamic Measurements

    Directory of Open Access Journals (Sweden)

    Osowski S.

    2014-12-01

    Full Text Available The paper presents application of differential electronic nose in the dynamic (on-line volatile measurement. First we compare the classical nose employing only one sensor array and its extension in the differential form containing two sensor arrays working in differential mode. We show that differential nose performs better at changing environmental conditions, especially the temperature, and well performs in the dynamic mode of operation. We show its application in recognition of different brands of tobacco

  2. On-line phase space measurement with kicker excitation

    Science.gov (United States)

    Dietrich, J.; Maier, R.; Mohos, I.

    1998-12-01

    A new method for on-line phase space measurements with kicker excitation at COSY was developed. The position data were measured using the analog output of two beam position monitors (BPMs) and directly monitored on a digital storage oscilloscope with an external clock (bunch-synchronous sampling). Nonlinear behavior of the proton beam was visible as well as were resonance islands. Typical measurements are presented.

  3. The new on-line Czech Food Composition Database.

    Science.gov (United States)

    Machackova, Marie; Holasova, Marie; Maskova, Eva

    2013-10-01

    The new on-line Czech Food Composition Database (FCDB) was launched on http://www.czfcdb.cz in December 2010 as a main freely available channel for dissemination of Czech food composition data. The application is based on a complied FCDB documented according to the EuroFIR standardised procedure for full value documentation and indexing of foods by the LanguaL™ Thesaurus. A content management system was implemented for administration of the website and performing data export (comma-separated values or EuroFIR XML transport package formats) by a compiler. Reference/s are provided for each published value with linking to available freely accessible on-line sources of data (e.g. full texts, EuroFIR Document Repository, on-line national FCDBs). LanguaL™ codes are displayed within each food record as searchable keywords of the database. A photo (or a photo gallery) is used as a visual descriptor of a food item. The application is searchable on foods, components, food groups, alphabet and a multi-field advanced search. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Review of trigger and on-line processors at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Lankford, A.J.

    1984-07-01

    The role of trigger and on-line processors in reducing data rates to manageable proportions in e/sup +/e/sup -/ physics experiments is defined not by high physics or background rates, but by the large event sizes of the general-purpose detectors employed. The rate of e/sup +/e/sup -/ annihilation is low, and backgrounds are not high; yet the number of physics processes which can be studied is vast and varied. This paper begins by briefly describing the role of trigger processors in the e/sup +/e/sup -/ context. The usual flow of the trigger decision process is illustrated with selected examples of SLAC trigger processing. The features are mentioned of triggering at the SLC and the trigger processing plans of the two SLC detectors: The Mark II and the SLD. The most common on-line processors at SLAC, the BADC, the SLAC Scanner Processor, the SLAC FASTBUS Controller, and the VAX CAMAC Channel, are discussed. Uses of the 168/E, 3081/E, and FASTBUS VAX processors are mentioned. The manner in which these processors are interfaced and the function they serve on line is described. Finally, the accelerator control system for the SLC is outlined. This paper is a survey in nature, and hence, relies heavily upon references to previous publications for detailed description of work mentioned here. 27 references, 9 figures, 1 table.

  5. DEVELOPMENT OF AN ON-LINE COAL WASHABILITY ANALYZER

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Miller; C.L. Lin; G.H. Luttrell; G.T. Adel; Barbara Marin

    2001-06-26

    Washability analysis is the basis for nearly all coal preparation plant separations. Unfortunately, there are no on- line techniques for determining this most fundamental of all coal cleaning information. In light of recent successes at the University of Utah, it now appears possible to determine coal washability on-line through the use of x-ray computed tomography (CT) analysis. The successful development of such a device is critical to the establishment of process control and automated coal blending systems. In this regard, Virginia Tech, Terra Tek Inc., and U.S. coal producers have joined with the University of Utah and to undertake the development of an X-ray CT-based on- line coal washability analyzer with financial assistance from DOE. Each project participant brought special expertise to the project in order to create a new dimension in coal cleaning technology. The project involves development of appropriate software and extensive testing/evaluation of well-characterized coal samples from operating coal preparation plants. Data collected to date suggest that this new technology is capable of serving as a universal analyzer that can not only provide washability analysis, but also particle size distribution analysis, ash analysis, and perhaps pyritic sulfur analysis.

  6. DEVELOPMENT OF AN ON-LINE COAL WASHABILITY ANALYZER

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Miller

    1999-09-30

    Washability analysis is the basis for nearly all coal preparation plant separations. Unfortunately, there are no on-line techniques for determining this most fundamental of all coal cleaning information. In light of recent successes at the University of Utah, it now appears possible to determine coal washability on-line through the use of x-ray computed tomography (CT) analysis. The successful development of such a device is critical to the establishment of process control and automated coal blending systems. In this regard, Virginia Tech, Terra Tek Inc., and several eastern coal companies have joined with the University of Utah and agreed to undertake the development of a x-ray CT-based on-line coal washability analyzer with financial assistance from DOE. The three-year project will cost $594,571, of which 33% ($194,575) will be cost-shared by the participants. The project involves development of appropriate software and extensive testing/evaluation of well-characterized coal samples from operating coal preparation plants. Each project participant brings special expertise to the project which is expected to create a new dimension in coal cleaning technology. Finally, it should be noted that the analyzer may prove to be a universal analyzer capable of providing not only washability analysis, but also particle size distribution analysis, ash analysis and perhaps pyritic sulfur analysis.

  7. Designing effective on-line continuing medical education.

    Science.gov (United States)

    Zimitat, Craig

    2001-03-01

    The Internet, and new information and communication technologies available through the Internet, provides medical educators with an opportunity to develop unique on-line learning environments with real potential to improve physicians' knowledge and effect change in their clinical practice. There are approximately 100 websites offering on-line CME courses in the USA alone. However, few of these CME courses appear to be based on sound educational principles or CME research and may have little chance of achieving the broader goals of CME. The majority of these courses closely resemble their traditional counterparts (e.g. paper-based books are now electronic books) and appear to be mere substitutions for old-technology CME resources. Whilst some CME providers add unique features of the Internet to enrich their websites, they do not employ strategies to optimize the learning opportunities afforded by this new technology. The adoption of adult learning principles, reflective practice and problem-based approaches can be used as a foundation for sound CME course design. In addition, knowledge of Internet technology and the learning opportunities it affords, together with strategies to maintain participation and new assessment paradigms, are all needed for developing online CME. We argue for an evidence-based and strategic approach to the development of on-line CME courses designed to enhance physician learning and facilitate change in clinical behaviour.

  8. A note on on-line Ramsey numbers for quadrilaterals

    Directory of Open Access Journals (Sweden)

    Joanna Cyman

    2014-01-01

    Full Text Available We consider on-line Ramsey numbers defined by a game played between two players, Builder and Painter. In each round Builder draws an the edge and Painter colors it either red or blue, as it appears. Builder's goal is to force Painter to create a monochromatic copy of a fixed graph \\(H\\ in as few rounds as possible. The minimum number of rounds (assuming both players play perfectly is the on-line Ramsey number \\(\\widetilde{r}(H\\ of the graph \\(H\\. An asymmetric version of the on-line Ramsey numbers \\(\\widetilde{r}(G,H\\ is defined accordingly. In 2005, Kurek and Ruciński computed \\(\\widetilde{r}(C_3\\. In this paper, we compute \\(\\widetilde{r}(C_4,C_k\\ for \\(3 \\le k \\le 7\\. Most of the results are based on computer algorithms but we obtain the exact value \\(\\widetilde{r}(C_4\\ and do so without the help of computer algorithms.

  9. Internet Teaching By Style: Profiling the On-line Professor

    Directory of Open Access Journals (Sweden)

    Sharon Strand

    2000-01-01

    Full Text Available The goal of this article is to offer the results of a pilot study which examined the personality type and teaching style preferences of faculty who elected to teach an on-line course. The article will present a description of personality assessments, including the Myers-Briggs Type Indicator (MBTI and Anthony Gregorc's Transaction Ability Inventory used to determine teaching tendencies and styles. In addition, a structured written questionnaire developed by the researchers was used to assess teacher satisfaction with worldwide web-based instruction. Utilizing the results of these psychological assessments, a preliminary analysis of the personal characteristics of college professors who chose to teach on line will be presented. This pilot study found that some preferred teaching styles may be more compatible with the dynamics of distance learning formats. By determining successful teaching styles for on-line courses, we can develop more effective faculty development programs to assist others in successfully transitioning into the cyber-teaching and learning environment.

  10. On-line prognosis of fatigue crack propagation based on Gaussian weight-mixture proposal particle filter.

    Science.gov (United States)

    Chen, Jian; Yuan, Shenfang; Qiu, Lei; Wang, Hui; Yang, Weibo

    2017-07-25

    Accurate on-line prognosis of fatigue crack propagation is of great meaning for prognostics and health management (PHM) technologies to ensure structural integrity, which is a challenging task because of uncertainties which arise from sources such as intrinsic material properties, loading, and environmental factors. The particle filter algorithm has been proved to be a powerful tool to deal with prognostic problems those are affected by uncertainties. However, most studies adopted the basic particle filter algorithm, which uses the transition probability density function as the importance density and may suffer from serious particle degeneracy problem. This paper proposes an on-line fatigue crack propagation prognosis method based on a novel Gaussian weight-mixture proposal particle filter and the active guided wave based on-line crack monitoring. Based on the on-line crack measurement, the mixture of the measurement probability density function and the transition probability density function is proposed to be the importance density. In addition, an on-line dynamic update procedure is proposed to adjust the parameter of the state equation. The proposed method is verified on the fatigue test of attachment lugs which are a kind of important joint components in aircraft structures. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. STUDENTS’ DIFFICULTIES IN BIOCHEMISTRY LEARNING ANALYZED THROUGH AN ON LINE ACADEMIC DROP-IN CENTER

    Directory of Open Access Journals (Sweden)

    F. Schoenmaker

    2007-05-01

    Full Text Available The biochemistry discipline integrates the curriculum of all graduation courses onthe Biological Area and is a basis for other disciplines. The students’ difficulties inthis discipline are already widely recognized. To investigate these difficulties, wecreated a drop-in on line service that has two purposes: (1 To give support tostudents’ learning by answering their questions and solving their problemswhenever they appear and (2 to analyze the questions presented, as a strategy todiagnose the most prevalent difficulties. After two semesters of this service on line,217 questions were received and answered. There were few conceptual questionsbeing the majority related to problems and exercises. The most frequent questionsdealt with cell metabolism (54,4%, mainly lipid metabolism and aerobicmetabolism; basic concepts (11,5% such as about amino acids and buffer, proteinstructure (8,3% and enzymes (7,8%. These percentages are correlated to thenumber of hours dedicated to each subjects in the disciplines. The main difficultiesfounded were: integration of metabolic processes in different tissues, induction ofenergy reserve oxidation, reciprocal regulation between glycolysis andgluconeogenesis. We suppose that the lack of laboratory practice difficults thelearning of basic concepts. A more in-deep analysis will be necessary toinvestigate the causes of the pointed difficulties.

  12. Combining On-Line Characterization Tools with Modern Software Environments for Optimal Operation of Polymerization Processes

    Directory of Open Access Journals (Sweden)

    Navid Ghadipasha

    2016-02-01

    Full Text Available This paper discusses the initial steps towards the formulation and implementation of a generic and flexible model centric framework for integrated simulation, estimation, optimization and feedback control of polymerization processes. For the first time it combines the powerful capabilities of the automatic continuous on-line monitoring of polymerization system (ACOMP, with a modern simulation, estimation and optimization software environment towards an integrated scheme for the optimal operation of polymeric processes. An initial validation of the framework was performed for modelling and optimization using literature data, illustrating the flexibility of the method to apply under different systems and conditions. Subsequently, off-line capabilities of the system were fully tested experimentally for model validations, parameter estimation and process optimization using ACOMP data. Experimental results are provided for free radical solution polymerization of methyl methacrylate.

  13. A Refreshable, On-line Cache for HST Data Retrieval

    Science.gov (United States)

    Fraquelli, Dorothy A.; Ellis, Tracy A.; Ridgaway, Michael; DPAS Team

    2016-01-01

    We discuss upgrades to the HST Data Processing System, with an emphasis on the changes Hubble Space Telescope (HST) Archive users will experience. In particular, data are now held on-line (in a cache) removing the need to reprocess the data every time they are requested from the Archive. OTFR (on the fly reprocessing) has been replaced by a reprocessing system, which runs in the background. Data in the cache are automatically placed in the reprocessing queue when updated calibration reference files are received or when an improved calibration algorithm is installed. Data in the on-line cache are expected to be the most up to date version. These changes were phased in throughout 2015 for all active instruments.The on-line cache was populated instrument by instrument over the course of 2015. As data were placed in the cache, the flag that triggers OTFR was reset so that OTFR no longer runs on these data. "Hybrid" requests to the Archive are handled transparently, with data not yet in the cache provided via OTFR and the remaining data provided from the cache. Users do not need to make separate requests.Users of the MAST Portal will be able to download data from the cache immediately. For data not in the cache, the Portal will send the user to the standard "Retrieval Options Page," allowing the user to direct the Archive to process and deliver the data.The classic MAST Search and Retrieval interface has the same look and feel as previously. Minor changes, unrelated to the cache, have been made to the format of the Retrieval Options Page.

  14. On-line learning algorithms for locally recurrent neural networks.

    Science.gov (United States)

    Campolucci, P; Uncini, A; Piazza, F; Rao, B D

    1999-01-01

    This paper focuses on on-line learning procedures for locally recurrent neural networks with emphasis on multilayer perceptron (MLP) with infinite impulse response (IIR) synapses and its variations which include generalized output and activation feedback multilayer networks (MLN's). We propose a new gradient-based procedure called recursive backpropagation (RBP) whose on-line version, causal recursive backpropagation (CRBP), presents some advantages with respect to the other on-line training methods. The new CRBP algorithm includes as particular cases backpropagation (BP), temporal backpropagation (TBP), backpropagation for sequences (BPS), Back-Tsoi algorithm among others, thereby providing a unifying view on gradient calculation techniques for recurrent networks with local feedback. The only learning method that has been proposed for locally recurrent networks with no architectural restriction is the one by Back and Tsoi. The proposed algorithm has better stability and higher speed of convergence with respect to the Back-Tsoi algorithm, which is supported by the theoretical development and confirmed by simulations. The computational complexity of the CRBP is comparable with that of the Back-Tsoi algorithm, e.g., less that a factor of 1.5 for usual architectures and parameter settings. The superior performance of the new algorithm, however, easily justifies this small increase in computational burden. In addition, the general paradigms of truncated BPTT and RTRL are applied to networks with local feedback and compared with the new CRBP method. The simulations show that CRBP exhibits similar performances and the detailed analysis of complexity reveals that CRBP is much simpler and easier to implement, e.g., CRBP is local in space and in time while RTRL is not local in space.

  15. On-line yields obtained with the ISOLDE RILIS

    Energy Technology Data Exchange (ETDEWEB)

    Koester, U. E-mail: ulli.koster@cern.ch; Fedoseyev, V.N.; Andreyev, A.N.; Bergmann, U.C.; Catherall, R.; Cederkaell, J.; Dietrich, M.; De Witte, H.; Fedorov, D.V.; Fraile, L.; Franchoo, S.; Fynbo, H.; Georg, U.; Giles, T.; Gorska, M.; Hannawald, M.; Huyse, M.; Joinet, A.; Jonsson, O.C.; Kratz, K.L.; Kruglov, K.; Lau, Ch.; Lettry, J.; Mishin, V.I.; Oinonen, M.; Partes, K.; Peraejaervi, K.; Pfeiffer, B.; Ravn, H.L.; Seliverstov, M.D.; Thirolf, P.; Van de Vel, K.; Van Duppen, P.; Van Roosbroeck, J.; Weissman, L

    2003-05-01

    The ISOLDE resonance ionization laser ion source (RILIS) allows to ionize efficiently and selectively many metallic elements. In recent yield surveys and on-line experiments with the ISOLDE RILIS we observed {sup 23-34}Mg, {sup 26-34}Al, {sup 98-132}Cd, {sup 149}Tb, {sup 155-177}Yb, {sup 179-200}Tl, {sup 183-215}Pb and {sup 188-218}Bi. The obtained yields are presented together with measured release parameters which allow to extrapolate the release efficiency towards more exotic (short-lived) nuclides of the same elements.

  16. TELCAL: The On-line Calibration Software for ALMA

    Science.gov (United States)

    Broguière, D.; Lucas, R.; Pardo, J.; Roche, J.-C.

    2011-07-01

    The ALMA on-line calibration regroups all the operations needed to maintain the ALMA interferometer optimally tuned to successfully execute the planned observations. The results of the calibrations are used in quasi-real time by the ALMA Control System. Since the first ALMA antennas were put into operation in 2009, TELCAL has been used for all the basic calibration operations and is still being improved following the project advancement. We describe here the calibrations done by TELCAL, its relationships with the other ALMA software subsystems and, briefly, the architecture of the software based on CORBA.

  17. Molecularly imprinted polymers for on-line extraction techniques.

    Science.gov (United States)

    Moein, Mohammad M; Abdel-Rehim, Mohamed

    2015-01-01

    Recent years have seen an increasing interest in the use of molecularly imprinted polymers (MIPs) as a sorbent for different extraction methods and this is due to its high selectivity. The MIP is designed to show specificity for the analyte of interest. Moreover, MIPs show physical robustness, resistance to high temperatures and pressures, and stability in the presence of acids, bases and a wide range of organic solvents. In the present article, various novel sample preparation techniques which MIPs applied as sorbent and on-line connected with analytical instruments were highlighted and discussed. The future aspects of MIPs as well were described.

  18. Enhancing Learner Autonomy in an On-line Editing Programme

    Directory of Open Access Journals (Sweden)

    Hebe Wong

    2011-09-01

    Full Text Available Little (1999 argues that in formal educational contexts, “the basis of learner autonomy is acceptance of responsibility for one’s own learning” (p.11. An autonomous learner takes responsibility for various aspects of learning (Benson & Voller, 1997; Holec, 1981. This study examines how learner autonomy opportunities were provided at various stages of writing in an on-line editing programme for a group of electronic engineering students and how the students took charge of their language learning when receiving feedback on their technical writing. The impact on their own learning effectiveness of the decisions students made is also discussed.

  19. On-line Adaptive Radiation Treatment of Prostate Cancer

    Science.gov (United States)

    2008-01-01

    volume (GTV), mandible, rainstem, parotids , and lymph nodes. Another physician repeated he contouring on all planning and on-line images...computed entation. Note the consistency of delineation of gross olume; light blue, nodes; purple, parotid glands; green,k com ostregicomp urs on e...0.9 1.0 Mandible D S C in de x Patient # 1 2 3 4 5 6 7 0.5 0.6 0.7 0.8 0.9 1.0 Left Parotid D S C in de x Patient # Fig. 6. Dice similarity

  20. Adaptive calibration method with on-line growing complexity

    Directory of Open Access Journals (Sweden)

    Šika Z.

    2011-12-01

    Full Text Available This paper describes a modified variant of a kinematical calibration algorithm. In the beginning, a brief review of the calibration algorithm and its simple modification are described. As the described calibration modification uses some ideas used by the Lolimot algorithm, the algorithm is described and explained. Main topic of this paper is a description of a synthesis of the Lolimot-based calibration that leads to an adaptive algorithm with an on-line growing complexity. The paper contains a comparison of simple examples results and a discussion. A note about future research topics is also included.

  1. On-line Measurements of Settling Charateristics in Activated Sludge

    DEFF Research Database (Denmark)

    Rasmussen, Michael R.; Larsen, Torben

    1997-01-01

    An on-line settling column for measuring the dynamic variations of settling velocity of activated sludge has been developed. The settling column is automatic and self-cleansing insuring continuous and reliable measurements. The settling column was tested on sludge from a batch reactor where sucrose...... was added as an impulse to activated sludge. The continuous measurement of settling velocity revealed a highly dynamic response after the sucrose was added. The result were verified with simultaneous measurement of the initial settling rate. A 200 hour experiment showed variations in settling velocity...

  2. Lower Bounds and Semi On-line Multiprocessor Scheduling

    Directory of Open Access Journals (Sweden)

    T.C. Edwin Cheng

    2003-10-01

    Full Text Available We are given a set of identical machines and a sequence of jobs from which we know the sum of the job weights in advance. The jobs have to be assigned on-line to one of the machines and the objective is to minimize the makespan. An algorithm with performance ratio 1.6 and a lower bound of 1.5 is presented. This improves recent results by Azar and Regev who published an algorithm with performance ratio 1.625 for the less general problem that the optimal makespan is known in advance.

  3. On-line Monitoring and Active Control for Transformer Noise

    Science.gov (United States)

    Liang, Jiabi; Zhao, Tong; Tian, Chun; Wang, Xia; He, Zhenhua; Duan, Lunfeng

    This paper introduces the system for on-line monitoring and active noise control towards the transformer noise based on LabVIEW and the hardware equipment including the hardware and software. For the hardware part, it is mainly focused on the composition and the role of hardware devices, as well as the mounting location in the active noise control experiment. And the software part introduces the software flow chats, the measurement and analysis module for the sound pressure level including A, B, C weighting methods, the 1/n octave spectrum and the power spectrum, active noise control module and noise data access module.

  4. Efficient and Secure Comparison for On-Line Auctions

    DEFF Research Database (Denmark)

    Damgård, Ivan Bjerre; Krøigaard, Mikkel; Geisler, Martin Joakim

    2007-01-01

    We propose a protocol for secure comparison of integers based on homomorphic encryption. We also propose a homomorphic encryption scheme that can be used in our protocol and makes it more efficient than previous solutions. Our protocol is well-suited for application in on-line auctions, both...... with respect to functionality and performance. It minimizes the amount of information bidders need to send, and for comparison of 16 bit numbers with security based on 1024 bit RSA (executed by two parties), our implementation takes 0.28 seconds including all computation and communication. Using precomputation...

  5. Robust Control Methods for On-Line Statistical Learning

    Directory of Open Access Journals (Sweden)

    Capobianco Enrico

    2001-01-01

    Full Text Available The issue of controlling that data processing in an experiment results not affected by the presence of outliers is relevant for statistical control and learning studies. Learning schemes should thus be tested for their capacity of handling outliers in the observed training set so to achieve reliable estimates with respect to the crucial bias and variance aspects. We describe possible ways of endowing neural networks with statistically robust properties by defining feasible error criteria. It is convenient to cast neural nets in state space representations and apply both Kalman filter and stochastic approximation procedures in order to suggest statistically robustified solutions for on-line learning.

  6. On-line matrix addition for detecting aerosol particles

    Institute of Scientific and Technical Information of China (English)

    ZHOU; Liuzhu; ZHU; Yuan; GUO; Xiaoyong; ZHAO; Wenwu; ZHENG; Haiyang; Gu; Xuejun; FANG; Li; ZHANG; Weijun

    2006-01-01

    Single aerosol particles were measured by matrix-assisted laser desorption/ionization (MALDI) with an aerosol time-of-flight mass spectrometer (ATOFMS). The inlet to the ATOFMS was coupled with an evaporation/condensation flow cell that allowed matrix addition by condensation onto the particles. The coated particles entered the ion source through three-stage differentially pumped capillary inlet and were then ionized by a focused 266 nm Nd:YAG laser. The mass spectra and aerodynamic size of the single particles can be obtained simultaneously. The on-line matrix addition technique makes it possible to identify biological aerosols in real-time.

  7. Research of on-line detection system for power capacitor

    Science.gov (United States)

    Yao, Junda; Qian, Zheng; Yu, Hao; Xia, Jiuyun

    2016-01-01

    The hidden danger exists in the power capacitor of power system due to long-time operation under the environment of high voltage. Thus, it is possible to induce serious fault, and the on-line detection system is urgently required. In this paper, two methods of the on-line detection system are compared in order to realize the better real-time condition detection. The first method is based on the STM microprocessor with an internal 12 bit A/D converter, which converts analog signals which is arrived from the sample circuit into digital signals, and then the FFT algorithm is used to accomplish the measurement of the voltage and current values of the capacitor. The second method is based on the special electric energy metering IC, which can obtain RMS (Root Mean Square) of voltage and current by processing the sampled data of the voltage and current, and store RMS of voltage and current in its certain registers. The operating condition of the capacitor can be obtained after getting the values of voltage and current. By comparing the measuring results of two methods, the second method could achieve a higher measurement accuracy and more simple construction.

  8. Increased Cortical Thickness in Professional On-Line Gamers

    Science.gov (United States)

    Hyun, Gi Jung; Shin, Yong Wook; Kim, Bung-Nyun; Cheong, Jae Hoon; Jin, Seong Nam

    2013-01-01

    Objective The bulk of recent studies have tested whether video games change the brain in terms of activity and cortical volume. However, such studies are limited by several factors including cross-sectional comparisons, co-morbidity, and short-term follow-up periods. In the present study, we hypothesized that cognitive flexibility and the volume of brain cortex would be correlated with the career length of on-line pro-gamers. Methods High-resolution magnetic resonance scans were acquired in twenty-three pro-gamers recruited from StarCraft pro-game teams. We measured cortical thickness in each individual using FreeSurfer and the cortical thickness was correlated with the career length and the performance of the pro-gamers. Results Career length was positively correlated with cortical thickness in three brain regions: right superior frontal gyrus, right superior parietal gyrus, and right precentral gyrus. Additionally, increased cortical thickness in the prefrontal cortex was correlated with winning rates of the pro-game league. Increased cortical thickness in the prefrontal and parietal cortices was also associated with higher performance of Wisconsin Card Sorting Test. Conclusion Our results suggest that in individuals without pathologic conditions, regular, long-term playing of on-line games is associated with volume changes in the prefrontal and parietal cortices, which are associated with cognitive flexibility. PMID:24474988

  9. On-line estimation of concentration parameters in fermentation processes

    Institute of Scientific and Technical Information of China (English)

    XIONG Zhi-hua; HUANG Guo-hong; SHAO Hui-he

    2005-01-01

    It has long been thought that bioprocess, with their inherent measurement difficulties and complex dynamics, posed almost insurmountable problems to engineers. A novel software sensor is proposed to make more effective use of those measurements that are already available, which enable improvement in fermentation process control. The proposed method is based on mixtures of Gaussian processes (GP) with expectation maximization (EM) algorithm employed for parameter estimation of mixture of models. The mixture model can alleviate computational complexity of GP and also accord with changes of operating condition in fermentation processes, i.e., it would certainly be able to examine what types of process-knowledge would be most relevant for local models' specific operating points of the process and then combine them into a global one. Demonstrated by on-line estimate of yeast concentration in fermentation industry as an example, it is shown that soft sensor based state estimation is a powerful technique for both enhancing automatic control performance of biological systems and implementing on-line monitoring and optimization.

  10. On-line structure-lossless digital mammogram image compression

    Science.gov (United States)

    Wang, Jun; Huang, H. K.

    1996-04-01

    This paper proposes a novel on-line structure lossless compression method for digital mammograms during the film digitization process. The structure-lossless compression segments the breast and the background, compresses the former with a predictive lossless coding method and discards the latter. This compression scheme is carried out during the film digitization process and no additional time is required for the compression. Digital mammograms are compressed on-the-fly while they are created. During digitization, lines of scanned data are first acquired into a small temporary buffer in the scanner, then they are transferred to a large image buffer in an acquisition computer which is connected to the scanner. The compression process, running concurrently with the digitization process in the acquisition computer, constantly checks the image buffer and compresses any newly arrived data. Since compression is faster than digitization, data compression is completed as soon as digitization is finished. On-line compression during digitization does not increase overall digitizing time. Additionally, it reduces the mammogram image size by a factor of 3 to 9 with no loss of information. This algorithm has been implemented in a film digitizer. Statistics were obtained based on digitizing 46 mammograms at four sampling distances from 50 to 200 microns.

  11. On-Line Core Thermal-Hydraulic Model Improvement

    Energy Technology Data Exchange (ETDEWEB)

    In, Wang Kee; Chun, Tae Hyun; Oh, Dong Seok; Shin, Chang Hwan; Hwang, Dae Hyun; Seo, Kyung Won

    2007-02-15

    The objective of this project is to implement a fast-running 4-channel based code CETOP-D in an advanced reactor core protection calculator system(RCOPS). The part required for the on-line calculation of DNBR were extracted from the source of the CETOP-D code based on analysis of the CETOP-D code. The CETOP-D code was revised to maintain the input and output variables which are the same as in CPC DNBR module. Since the DNBR module performs a complex calculation, it is divided into sub-modules per major calculation step. The functional design requirements for the DNBR module is documented and the values of the database(DB) constants were decided. This project also developed a Fortran module(BEST) of the RCOPS Fortran Simulator and a computer code RCOPS-SDNBR to independently calculate DNBR. A test was also conducted to verify the functional design and DB of thermal-hydraulic model which is necessary to calculate the DNBR on-line in RCOPS. The DNBR margin is expected to increase by 2%-3% once the CETOP-D code is used to calculate the RCOPS DNBR. It should be noted that the final DNBR margin improvement could be determined in the future based on overall uncertainty analysis of the RCOPS.

  12. The Leuven isotope separator on-line laser ion source

    CERN Document Server

    Kudryavtsev, Y; Franchoo, S; Huyse, M; Gentens, J; Kruglov, K; Müller, W F; Prasad, N V S; Raabe, R; Reusen, I; Van den Bergh, P; Van Duppen, P; Van Roosbroeck, J; Vermeeren, L; Weissman, L

    2002-01-01

    An element-selective laser ion source has been used to produce beams of exotic radioactive nuclei and to study their decay properties. The operational principle of the ion source is based on selective resonant laser ionization of nuclear reaction products thermalized and neutralized in a noble gas at high pressure. The ion source has been installed at the Leuven Isotope Separator On-Line (LISOL), which is coupled on-line to the cyclotron accelerator at Louvain-la-Neuve. sup 5 sup 4 sup , sup 5 sup 5 Ni and sup 5 sup 4 sup , sup 5 sup 5 Co isotopes were produced in light-ion-induced fusion reactions. Exotic nickel, cobalt and copper nuclei were produced in proton-induced fission of sup 2 sup 3 sup 8 U. The b decay of the sup 6 sup 8 sup - sup 7 sup 4 Ni, sup 6 sup 7 sup - sup 7 sup 0 Co, sup 7 sup 0 sup - sup 7 sup 5 Cu and sup 1 sup 1 sup 0 sup - sup 1 sup 1 sup 4 Rh isotopes has been studied by means of beta-gamma and gamma-gamma spectroscopy. Recently, the laser ion source has been used to produce neutron-d...

  13. Increased cortical thickness in professional on-line gamers.

    Science.gov (United States)

    Hyun, Gi Jung; Shin, Yong Wook; Kim, Bung-Nyun; Cheong, Jae Hoon; Jin, Seong Nam; Han, Doug Hyun

    2013-12-01

    The bulk of recent studies have tested whether video games change the brain in terms of activity and cortical volume. However, such studies are limited by several factors including cross-sectional comparisons, co-morbidity, and short-term follow-up periods. In the present study, we hypothesized that cognitive flexibility and the volume of brain cortex would be correlated with the career length of on-line pro-gamers. High-resolution magnetic resonance scans were acquired in twenty-three pro-gamers recruited from StarCraft pro-game teams. We measured cortical thickness in each individual using FreeSurfer and the cortical thickness was correlated with the career length and the performance of the pro-gamers. CAREER LENGTH WAS POSITIVELY CORRELATED WITH CORTICAL THICKNESS IN THREE BRAIN REGIONS: right superior frontal gyrus, right superior parietal gyrus, and right precentral gyrus. Additionally, increased cortical thickness in the prefrontal cortex was correlated with winning rates of the pro-game league. Increased cortical thickness in the prefrontal and parietal cortices was also associated with higher performance of Wisconsin Card Sorting Test. Our results suggest that in individuals without pathologic conditions, regular, long-term playing of on-line games is associated with volume changes in the prefrontal and parietal cortices, which are associated with cognitive flexibility.

  14. Precise On-line Position Measurement for Particle Therapy

    CERN Document Server

    Actis, O; König, S

    2014-01-01

    An on-line beam position monitoring and regular beam stability tests are of utmost importance for the Quality Assurance (QA) of the patient treatment at any particle therapy facility. The Gantry${0.5 mm}2$ at the Paul Scherrer Institute uses a strip ionization chamber for the on-line beam position verification. The design of the strip chamber placed in the beam in front of the patient allows for a small beam penumbra in order to achieve a high-quality lateral beam delivery. The detector granularity and the low noise allow the reconstruction of the signals offered by Gantry${0.5 mm}2$ with a precision of about 0.1 mm. The frond-end electronics and the whole data processing sequence have been optimized for minimizing the dead time between the beam applications to about 2 ms: the charge collection is performed in about 1 ms, read-out takes place in 100 $\\mu$s while data verification and logging are completed in less than 1 ms. The sub-millimeter precision of the lateral reconstruction allows the dose inhomogenei...

  15. Fully On-line Introductory Physics with a Lab

    Science.gov (United States)

    Schatz, Michael

    We describe the development and implementation of a college-level introductory physics (mechanics) course and laboratory that is suited for both on-campus and on-line environments. The course emphasizes a ``Your World is Your Lab'' approach whereby students first examine and capture on video (using cellphones) motion in their immediate surroundings, and then use free, open-source software both to extract data from the video and to apply physics principles to build models that describe, predict, and visualize the observations. Each student reports findings by creating a video lab report and posting it online; these video lab reports are then distributed to the rest of the class for peer review. In this talk, we will discuss the student and instructor experiences in courses offered to three distinct audiences in different venues: (1) a Massively Open On-line Course (MOOC) for off-campus participants, (2) a flipped/blended course for on-campus students, and, most recently, (3) a fully-online course for off-campus students.

  16. Evaluating on-line control of goal-directed arm movement while standing in virtual visual environment

    OpenAIRE

    Martin, Olivier; Julian, Benjamin; Boissieux, Laurence; Gascuel, Jean-Dominique; Prablanc, Claude

    2002-01-01

    International audience; The control of visually guided movement has been showed to be optimised when motor programming quickly integrated the visual information to update on-going motor commands. The purpose of this study was to verify this proposition for movement executed in virtual visual environment (VE), by exploring the effect of immersion on the on-line visuomotor control of goal-directed arm movement. Six subjects participated in the experiment, in which hand reaching toward a station...

  17. Peculiarities of Communicative Style in The Advertisement Genre in English and Russian University On-line Communication Discourse Analysis

    Directory of Open Access Journals (Sweden)

    Милана Евгеньевна Куприянова

    2014-12-01

    Full Text Available Intercultural communicative competence is one of the integral parts of translators’ skills. The article analyses national and cultural peculiarities of English and Russian communicative styles in the advertisement speech genre in university on-line communication to address the problem of translatability of lexical units. Furthermore, the study explains the use of particular linguistic means and communication strategies as related to the specific features of Anglo-Saxon and Russian linguistic cultures.

  18. On-line monitoring and inservice inspection in codes; Betriebsueberwachung und wiederkehrende Pruefungen in den Regelwerken

    Energy Technology Data Exchange (ETDEWEB)

    Bartonicek, J.; Zaiss, W. [Gemeinschaftskernkraftwerk Neckar GmbH, Neckarwestheim (Germany); Bath, H.R. [Bundesamt fuer Strahlenschutz, Salzgitter (Germany). Geschaeftsstelle des Kerntechnischen Ausschusses (KTA)

    1999-08-01

    The relevant regulatory codes determine the ISI tasks and the time intervals for recurrent components testing for evaluation of operation-induced damaging or ageing in order to ensure component integrity on the basis of the last available quality data. In-service quality monitoring is carried out through on-line monitoring and recurrent testing. The requirements defined by the engineering codes elaborated by various institutions are comparable, with the KTA nuclear engineering and safety codes being the most complete provisions for quality evaluation and assurance after different, defined service periods. German conventional codes for assuring component integrity provide exclusively for recurrent inspection regimes (mainly pressure tests and optical testing). The requirements defined in the KTA codes however always demanded more specific inspections relying on recurrent testing as well as on-line monitoring. Foreign codes for ensuring component integrity concentrate on NDE tasks at regular time intervals, with time intervals scope of testing activities being defined on the basis of the ASME code, section XI. (orig./CB) [Deutsch] Fuer die Komponentenintegritaet sind die Schaedigungsmechanismen mit dem nach den Regelwerken einzuhaltenden Abstand abzusichern. Dabei ist die jeweils vorhandene (Ist-) Qualitaet als Ausgangspunkt entscheidend. Die Absicherung der vorhandenen Qualitaet im weiteren Betrieb erfolgt durch geeignete Betriebsueberwachung und wiederkehrende Pruefungen. Die Anforderungen der Regelwerke sind vergleichbar, wobei die Bestimmung der vorhandenen Qualitaet nach einer bestimmten Betriebszeit sowie deren Absicherung im weiteren Betrieb am vollstaendigsten auf Basis des KTA-Regelwerkes moeglich ist. Die Absicherung der Komponentenintegritaet im Betrieb beruht in deutschen konventionellen Regelwerken nur auf den wiederkehrenden Pruefungen (hauptsaechlich Druckpruefungen und Sichtpruefungen). Das KTA-Regelwerk forderte hier schon immer qualifizierte

  19. On-line monitoring and inservice inspection in codes; Betriebsueberwachung und wiederkehrende Pruefungen in den Regelwerken

    Energy Technology Data Exchange (ETDEWEB)

    Bartonicek, J.; Zaiss, W. [Gemeinschaftskernkraftwerk Neckar GmbH, Neckarwestheim (Germany); Bath, H.R. [Bundesamt fuer Strahlenschutz, Salzgitter (Germany). Geschaeftsstelle des Kerntechnischen Ausschusses (KTA)

    1999-08-01

    The relevant regulatory codes determine the ISI tasks and the time intervals for recurrent components testing for evaluation of operation-induced damaging or ageing in order to ensure component integrity on the basis of the last available quality data. In-service quality monitoring is carried out through on-line monitoring and recurrent testing. The requirements defined by the engineering codes elaborated by various institutions are comparable, with the KTA nuclear engineering and safety codes being the most complete provisions for quality evaluation and assurance after different, defined service periods. German conventional codes for assuring component integrity provide exclusively for recurrent inspection regimes (mainly pressure tests and optical testing). The requirements defined in the KTA codes however always demanded more specific inspections relying on recurrent testing as well as on-line monitoring. Foreign codes for ensuring component integrity concentrate on NDE tasks at regular time intervals, with time intervals scope of testing activities being defined on the basis of the ASME code, section XI. (orig./CB) [Deutsch] Fuer die Komponentenintegritaet sind die Schaedigungsmechanismen mit dem nach den Regelwerken einzuhaltenden Abstand abzusichern. Dabei ist die jeweils vorhandene (Ist-) Qualitaet als Ausgangspunkt entscheidend. Die Absicherung der vorhandenen Qualitaet im weiteren Betrieb erfolgt durch geeignete Betriebsueberwachung und wiederkehrende Pruefungen. Die Anforderungen der Regelwerke sind vergleichbar, wobei die Bestimmung der vorhandenen Qualitaet nach einer bestimmten Betriebszeit sowie deren Absicherung im weiteren Betrieb am vollstaendigsten auf Basis des KTA-Regelwerkes moeglich ist. Die Absicherung der Komponentenintegritaet im Betrieb beruht in deutschen konventionellen Regelwerken nur auf den wiederkehrenden Pruefungen (hauptsaechlich Druckpruefungen und Sichtpruefungen). Das KTA-Regelwerk forderte hier schon immer qualifizierte

  20. FEDIX on-line information service: Design, develop, test, and implement, an on-line research and education information service

    Energy Technology Data Exchange (ETDEWEB)

    Rodman, J.A.

    1992-01-01

    The FEDIX Annual Status Report provides details regarding an on-line information project designed, developed and implemented by Federal Information Exchange, Inc., a diversified information services company. This document details the project design activities, summarizes the developmental phases of the project and describes the implementation activities generated to fulfill the project's objectives. The information contained in this document illustrates FIE's continuing commitment to serve as the link that facilitates the dissemination of federal information to the education community. This report reviews the project accomplishments and describes intended service enhancements.

  1. On-line Measurement of Water-Soluble Ions in Ambient Particles

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Combining the system of rapid collection of ambient particles and ion chromatography, the system of rapid collection of fine particles and ion chromatography (RCFP-IC) was established to automatically analyze on-line the concentrations of water-soluble ions in ambient particles. Here, the general scheme of RCFP-IC is described and its basic performance is tested. The detection limit of RCFP-IC for SO42-,NO-3, NO-2, Cl- and F- is below 0.3 μg m-3. The collection efficiency of RCFP-IC increases rapidly with increasing sized particles. For particles larger than 300 nm, the collection efficiency approaches 100%. The precision of RCFP-IC is more than 90% over 28 repetitions. The response of RCFP-IC is very sensitive and no obvious cross-pollution is found during measurement. A comparison of RCFP-IC with an integrated filter measurement indicates that the measurement of RCFP-IC is comparable in both laboratory experiments and field observations. The results of the field experiment prove that RCFP-IC is an effective on-line monitoring system and is helpful in source apportionment and pollution episode monitoring.

  2. On-Line RSSI-Range Model Learning for Target Localization and Tracking

    Directory of Open Access Journals (Sweden)

    José Ramiro Martínez-de Dios

    2017-08-01

    Full Text Available The interactions of Received Signal Strength Indicator (RSSI with the environment are very difficult to be modeled, inducing significant errors in RSSI-range models and highly disturbing target localization and tracking methods. Some techniques adopt a training-based approach in which they off-line learn the RSSI-range characteristics of the environment in a prior training phase. However, the training phase is a time-consuming process and must be repeated in case of changes in the environment, constraining flexibility and adaptability. This paper presents schemes in which each anchor node on-line learns its RSSI-range models adapted to the particularities of its environment and then uses its trained model for target localization and tracking. Two methods are presented. The first uses the information of the location of anchor nodes to dynamically adapt the RSSI-range model. In the second one, each anchor node uses estimates of the target location –anchor nodes are assumed equipped with cameras—to on-line adapt its RSSI-range model. The paper presents both methods, describes their operation integrated in localization and tracking schemes and experimentally evaluates their performance in the UBILOC testbed.

  3. Configuration Database for BaBar On-line

    Energy Technology Data Exchange (ETDEWEB)

    Salnikov, Andrei

    2003-05-27

    The configuration database is one of the vital systems in the BaBar on-line system. It provides services for the different parts of the data acquisition system and control system, which require run-time parameters. The original design and implementation of the configuration database played a significant role in the successful BaBar operations since the beginning of experiment. Recent additions to the design of the configuration database provide better means for the management of data and add new tools to simplify main configuration tasks. We describe the design of the configuration database, its implementation with the Objectivity/DB object-oriented database, and our experience collected during the years of operation.

  4. On-line corrosion monitoring in district heating systems

    DEFF Research Database (Denmark)

    Richter, Sonja; Thorarinsdottir, R.I.; Hilbert, Lisbeth Rischel

    2004-01-01

    Traditionally corrosion monitoring in district heating systems has been performed offline via weight loss coupons. These measurements give information about the past and not the present situation and require long exposure time (weeks or months). The good quality of district heating medium makes...... corrosion monitoring a challenge. Under normal conditions the pH is high (app. 9), conductivity is low (app. 10-200 µS/cm) and the concentration of dissolved oxygen is negligible. The low corrosion rates (in the order of µm/y) are difficult to measure and furthermore, factors such as hydrogen sulphide......), Electrochemical Noise (EN) and Zero Resistance Ammetry (ZRA). Electrochemical Resistance (ER) has also been used to measure corrosion. The method traditionally only measures corrosion off-line but with newly developed high-sensitive ER technique developed by MetriCorr in Denmark, on-line monitoring is possible...

  5. The Task Manager for the LHCb On-Line Farm

    CERN Document Server

    Bonifazi, F; Carbone, A; Galli, D; Gregori, D; Marconi, U; Peco, G; Vagnoni, V

    2004-01-01

    The Task Manager is a utility to start, stop and list processes on the on-line farm. Each process started by the Task Manager has a string environment variable set, named UTGID (User defined unique Thread Group Identifier) which allows to identify the process. The Task Manager uses the UTGID to list the running processes and to identify the processes to be stopped. It has also the ability to start a process using a particular user name and to set the scheduler type and the priority for the process itself. The Task Manager package includes a Linux DIM server (tmSrv), four Linux command line DIM clients (tmStart, tmLs, tmKill and tmStop) and a JCOP (Joint Control Project) PVSS client.

  6. On-line methods for rotorcraft aeroelastic mode identification

    Science.gov (United States)

    Molusis, J. A.; Kleinman, D. L.

    1982-01-01

    The requirements for the on-line identification of rotorcraft aeroelastic blade modes from random response test data are presented. A recursive maximum likelihood (RML) technique is used in conjunction with a bandpass filter to identify isolated blade mode damping and frequency. The RML technique is demonstrated to have excellent convergence characteristics in random measurement noise and random process noise excitation. The RML identification technique uses an ARMA representation for the aeroelastic stochastic system and requires virtually no user interaction while providing accurate confidence bands on the parameter estimates. Comparisons are made with an off-line Newton type maximum likelihood algorithm which uses a state variable model representation. Results are presented from simulation random response data which quantify the identifed parameter convergence behavior for various levels of random excitation which is typical of wind tunnel turbulence levels. The RML technique is applied to hingless rotor test data from the NASA Langley Research Center Helicopter Hover Facility.

  7. An on-line method in studying music parsing.

    Science.gov (United States)

    Berent, I; Perfetti, C A

    1993-03-01

    Listening to music entails the construction of a mental representation based on partial and ambiguous information. This study examines an experimental method that reflects such parsing decisions on-line by detecting the cognitive load resulting from temporary parsing failures. The method investigated was a divided attention paradigm in which listening to music was the primary task and click detection was a concurrent secondary task. It was hypothesized that increasing the complexity of the primary task by introducing an unprepared chromatic modulation results in an increase in response latencies to a click presented immediately after the modulatory shift. The support of this prediction by musicians' data provides evidence for the sensitivity of the paradigm. The failure of non-musicians to reflect the expected load is attributed to their attention-allocation strategy. These results are discussed in terms of their implications on the view of the musical parser as deterministic.

  8. 3rd Computer Science On-line Conference

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2014-01-01

    This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

  9. On-Line Adaptive Radiation Therapy: Feasibility and Clinical Study

    Directory of Open Access Journals (Sweden)

    Taoran Li

    2010-01-01

    Full Text Available The purpose of this paper is to evaluate the feasibility and clinical dosimetric benefit of an on-line, that is, with the patient in the treatment position, Adaptive Radiation Therapy (ART system for prostate cancer treatment based on daily cone-beam CT imaging and fast volumetric reoptimization of treatment plans. A fast intensity-modulated radiotherapy (IMRT plan reoptimization algorithm is implemented and evaluated with clinical cases. The quality of these adapted plans is compared to the corresponding new plans generated by an experienced planner using a commercial treatment planning system and also evaluated by an in-house developed tool estimating achievable dose-volume histograms (DVHs based on a database of existing treatment plans. In addition, a clinical implementation scheme for ART is designed and evaluated using clinical cases for its dosimetric qualities and efficiency.

  10. The Monitor System for the LHCb on-line farm

    CERN Document Server

    Bonifazi, F; Carbone, A; Galli, D; Gregori, D; Marconi, U; Peco, G; Vagnoni, V

    2005-01-01

    The aim of the LHCb on-line farm Monitor System is to keep under control all the working indicators which are relevant for the farm operation, and to set the appropriate alarms whenever an error or a critical condition comes up. Since the most stressing tasks of the farm are the data transfer and processing, relevant indicators includes the CPU and the memory load of the system, the network interface and the TCP/IP stack parameters, the rates of the interrupts raised by the network interface card and the detailed status of the running processes. The monitoring of computers’ physical conditions (temperatures, fan speeds and motherboard voltages) are the subject of a separate technical note, since they are accessed in a different way, by using the IPMI protocol.

  11. The Message Logger for the LHCb on-line farm

    CERN Document Server

    Bonifazi, F; Carbone, A; Galli, D; Gregori, D; Marconi, U; Peco, G; Vagnoni, V

    2005-01-01

    The Message Logger is a utility which provide a logger facility for the processes running on the nodes of the on-line farm. It can also be used to collect the processes stdout/stderr. The Message Logger can be exploited using two different policies: either as a no-drop logger facility (messages cannot be lost, but a write to the logger facility blocks in case of full-buffer condition, due e.g. to a network congestion) or as a congestion-proof logger facility (a write to the logger facility never locks even in case of network congestion, but, in this case, messages are dropped). The Message Logger package includes a Linux DIM server (logSrv), a Linux terminal/command-line DIM client (logViewer) and a PVSS DIM client.

  12. On-line blind separation of non-stationary signals

    Directory of Open Access Journals (Sweden)

    Todorović-Zarkula Slavica

    2005-01-01

    Full Text Available This paper addresses the problem of blind separation of non-stationary signals. We introduce an on-line separating algorithm for estimation of independent source signals using the assumption of non-stationary of sources. As a separating model, we apply a self-organizing neural network with lateral connections, and define a contrast function based on correlation of the network outputs. A separating algorithm for adaptation of the network weights is derived using the state-space model of the network dynamics, and the extended Kalman filter. Simulation results obtained in blind separation of artificial and real-world signals from their artificial mixtures have shown that separating algorithm based on the extended Kalman filter outperforms stochastic gradient based algorithm both in convergence speed and estimation accuracy.

  13. A Fingerprint Minutiae Matching Method Based on Line Segment Vector

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Minutiae-based fingerprint matching is the most commonly used in an automatic fingerprint identification system. In this paper, we propose a minutia matching method based on line segment vector. This method uses all the detected minutiae (the ridge ending and the ridge bifurcation) in a fingerprint image to create a set of new vectors (line segment vector). Using these vectors, we can determine a truer reference point more efficiently. In addition, this new minutiae vector can also increase the accuracy of the minutiae matching. By experiment on the public domain collections of fingerprint images fvc2004 DB3 set A and DB4 set A, the result shows that our algorithm can obtain an improved verification performance.

  14. A versatile apparatus for on-line emission channeling experiments

    CERN Document Server

    da Silva, Manuel Ribeiro; Correia, João Guilherme; Amorim, Lígia Marina; Pereira, Lino Miguel da Costa

    2013-01-01

    The concept and functionality of an apparatus dedicated to emission channeling experiments using short-lived isotopes on-line at ISOLDE/CERN is described. The setup is assembled in two functional blocks - (a) base stand including beam collimation, implantation and measurement chamber, cryogenic extension, and vacuum control system and - (b) Panmure goniometer extension including maneuvering cradle and sample heating furnace. This setup allows for in situ implantation and sample analysis in the as-implanted state and upon cooling down to 50 K and during annealing up to 1200 K. The functionality of the setup will be illustrated with the example of establishing the lattice location of $^{56}$Mn probes implanted into GaAs.

  15. On-line control of the nonlinear dynamics for synchrotrons

    Science.gov (United States)

    Bengtsson, J.; Martin, I. P. S.; Rowland, J. H.; Bartolini, R.

    2015-07-01

    We propose a simple approach to the on-line control of the nonlinear dynamics in storage rings, based on compensation of the nonlinear resonance driving terms using beam losses as the main indicator of the strength of a resonance. The correction scheme is built on the analysis of the resonance driving terms in first perturbative order and on the possibility of using independent power supplies in the sextupole magnets, which is nowadays present in many synchrotron light sources. Such freedom allows the definition of "smart sextupole knobs" attacking each resonance separately. The compensation scheme has been tested at the Diamond light source and proved to be effective in opening up the betatron tune space, resonance free, available to the electron beam and to improve the beam lifetime.

  16. BCal: an on-line Bayesian radiocarbon calibration tool

    Directory of Open Access Journals (Sweden)

    Caitlin E. Buck

    1999-09-01

    Full Text Available In this paper we describe newly launched software for on-line Bayesian calibration of archaeological radiocarbon determinations. The software is known as BCal and we invite members of the world-wide archaeological research community to use it should they so wish. All that is required to gain access to the software is a computer connected to the Internet with a modern World-wide Web browser (of the sort you are probably using to read this. BCal does not require access to any additional 'Plug-ins' on your machine. Since the computations needed to obtain the calibrations are undertaken on the BCal server, if you have enough computer power to run your World-wide Web browser you have enough power to use BCal.

  17. Parity Codes Used for On-Line Testing in FPGA

    Directory of Open Access Journals (Sweden)

    P. Kubalík

    2005-01-01

    Full Text Available This paper deals with on-line error detection in digital circuits implemented in FPGAs. Error detection codes have been used to ensure the self-checking property. The adopted fault model is discussed. A fault in a given combinational circuit must be detected and signalized at the time of its appearance and before further distribution of errors. Hence safe operation of the designed system is guaranteed. The check bits generator and the checker were added to the original combinational circuit to detect an error during normal circuit operation. This concurrent error detection ensures the Totally Self-Checking property. Combinational circuit benchmarks have been used in this work in order to compute the quality of the proposed codes. The description of the benchmarks is based on equations and tables. All of our experimental results are obtained by XILINX FPGA implementation EDA tools. A possible TSC structure consisting of several TSC blocks is presented. 

  18. On-line alkali detector based on surface ionization

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, J.G.; Loenn, B.; Jaeglid, B.; Engvall, K.; Pettersson, J.B.C. [Chalmers University of Technology, Goeteborg (Sweden). Dept. of Physical Chemistry GU

    1998-12-31

    This project adapts a new on-line alkali measurement technique to coal and biomass combustion and gasification. Alkali metal atoms are known to easily ionize in contact with hot metal surfaces, and the instrument is based on this principle called surface ionization (SI). The primary parts of the detector are a platinum filament and an ion collector. The platinum filament is supported between two electrodes and heated to the temperature for alkali vaporization in ionic form. The ion collector is situated close to the filament. The measured current is proportional to the arrival rate of alkali atoms onto the filament. Laboratory tests were performed on detector sensitivity, detection limit, and time response. Similar sensitivity to both sodium and potassium regardless of molecular form was found. The time response of the detector is determined to be approximately 1 ms enabling it to monitor fast concentration changes in flue gas. Particles with a size below 5 nm melt completely on the hot platinum surface and give similar signals. For larger particles, the ionization efficiency is not 100% and depends on the type of salt. This problem can be overcome with an alternative filament configuration. The detector function was tested in a laboratory high pressure furnace using different fuel samples, atmospheres, and pressures. Alkali release from coal in general is lower than for biomass samples, rate constants and activation energies for alkali release were determined. Measurements were carried out in a biomass pyrolysis apparatus and a gasification pilot plant. The detector function was not influenced by a high concentration of hydrocarbons in the gas phase, and the measurements confirmed detector function in a hostile environment. The detector performed well in laboratory tests, and is a strong candidate for further development into a standard on-line monitor of alkali species in hot flue gas. 10 refs., 16 figs.

  19. Review of Worcestershire On-line Fabric Type Series website

    Directory of Open Access Journals (Sweden)

    Beverley Nenk

    2003-06-01

    Full Text Available The study of archaeological ceramics is advanced through the creation and development of regional and national pottery type-series, which contain samples of each type of pottery identified from a particular area or region. Pottery researchers working in any period, from prehistoric to post-medieval, require access to such type-series, and to their associated data, in order to be able to advance the identification of all types of pottery, not only those types produced in the local area, but those produced in surrounding regions, as well as those imported from abroad. The publication of such type-series, as well as their accessibility to researchers, is essential if the information they contain is to be disseminated. The development of the Worcestershire On-Line Fabric Type Series is the first stage in a remarkable project designed to make the complete fabric and form type series for Worcestershire ceramics accessible on the internet. As part of the Historic Environment Record for Worcestershire, formerly the Sites and Monuments Record, it is designed to improve access to finds and environmental data, with the aim of encouraging and facilitating research. Funded by Worcestershire County Council as part of its commitment to e-government, it is being developed by Worcestershire County Council Archaeology Service with OxfordArchDigital. It is one of a proposed series of on-line specialist resources (to include, for example, clay pipes, environmental archaeology, flint tools, historic buildings, which are also designed to stand alone as research tools. The ceramics website is the first part of Pottery in Perspective, a web-based project to provide information on the pottery used and made in Worcestershire from prehistory to c. 1900AD.

  20. On-line monitoring of particulate iron oxides in steam generator feedwater using x-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Stauffer, C.C.; Connolly, D.J. [Babcock and Wilcox, Alliance, OH (United States). Research and Development Division; Millett, P.J. [Electric Power Research Inst., Palo Alto, CA (United States)

    1995-12-01

    Corrosion product monitoring is important as power plants strive to minimize corrosion and maximize availability. Current methodology for monitoring corrosion products involves grab sampling and/or collection of integrated samples using membrane filters followed by analysis of the membranes in the laboratory. This technique is labor intensive and provides only average values over lengthy sampling intervals (typically 1--3 days). Recently, a laboratory tool -- x-ray fluorescence (XRF) spectroscopy -- was combined with existing on-line sampling techniques resulting in an on-line XRF monitor capable of measuring iron oxide particulates in a flowing stream at the parts-per-billion (ppb) level and below. After development in the laboratory, the instrument was successfully field tested in two power plants. After testing at the first power plant, modifications to improve instrument performance were incorporated. This paper presents information regarding design and operation of the instrument, improvements made during the first test period, and field data obtained during plant service. Results show that this instrument will provide on-line measurements of iron oxides at the ppb level with minimal operator involvement. Finally, there are wider applications for this on-line XRF monitor. Though the present system is geared toward iron analysis in corrosion products, it could as well be configured for other elements or groups of elements for other applications such lead, sulfur, copper, chromium, or any other element detectable by x-ray fluorescence.

  1. Control and monitoring of on-line trigger algorithms using a SCADA system

    CERN Document Server

    van Herwijnen, E; Barczyk, A; Damodaran, B; Frank, M; Gaidioz, B; Gaspar, C; Jacobsson, R; Jost, B; Neufeld, N; Bonifazi, F; Callot, O; Lopes, H

    2006-01-01

    LHCb [1] has an integrated Experiment Control System (ECS) [2], based on the commercial SCADA system PVSS [3]. The novelty of this approach is that, in addition to the usual control and monitoring of experimental equipment, it provides control and monitoring for software processes, namely the on-line trigger algorithms. Algorithms based on Gaudi [4] (the LHCb software framework) compute the trigger decisions on an event filter farm of around 2000 PCs. Gaucho [5], the GAUdi Component Helping Online, was developed to allow the control and monitoring of Gaudi algorithms. Using Gaucho, algorithms can be monitored from the run control system provided by the ECS. To achieve this, Gaucho implements a hierarchical control system using Finite State Machines. In this article we describe the Gaucho architecture, the experience of monitoring a large number of software processes and some requirements for future extensions.

  2. On-line Fault Diagnosis in Industrial Processes Using Variable Moving Window and Hidden Markov Model

    Institute of Scientific and Technical Information of China (English)

    周韶园; 谢磊; 王树青

    2005-01-01

    An integrated framework is presented to represent and classify process data for on-line identifying abnormal operating conditions. It is based on pattern recognition principles and consists of a feature extraction step, by which wavelet transform and principal component analysis are used to capture the inherent characteristics from process measurements, followed by a similarity assessment step using hidden Markov model (HMM) for pattern comparison. In most previous cases, a fixed-length moving window was employed to track dynamic data, and often failed to capture enough information for each fault and sometimes even deteriorated the diagnostic performance. A variable moving window, the length of which is modified with time, is introduced in this paper and case studies on the Tennessee Eastman process illustrate the potential of the proposed method.

  3. Determination of anions with an on-line capillary electrophoresis method; Anionien on-line maeaeritys kapillaarielektroforeesilla - MPKT 10

    Energy Technology Data Exchange (ETDEWEB)

    Siren, H.; Saerme, T.; Kotiaho, T.; Hiissa, T.; Savolahti, P.; Komppa, V. [VTT Chemical Technology, Espoo (Finland)

    1998-12-31

    The aim of the study was to set-up an on-line capillary electrophoresis method for determination of anions in process waters of pulp and paper industry with exporting the results to the process control system of the mill. The quantification is important, since it will give information about the possible causes of precipitation. In recent years, the capillary electrophoresis (CE) due to its high separation efficiency has been shown as a method to take into consideration when analyzing chemical species ranging from small inorganic anions to different macromolecules. Many compounds are not easily detected in their native state, why analysis methods must be developed to improve their detection. Especially, small inorganic and organic anions which do not have chromophores are not sensitive enough for direct-UV detection. In such analyses the anions are mostly detected with indirect-UV technique. Capillary electrophoresis instruments are used to analyze samples in off-line, which seldom represent the situation in process. Therefore, on-line instrument technology with autoanalyzing settings will be needed in quality control. The development of a fully automatic capillary electrophoresis system is underway in co-operation with KCL (The Finnish Pulp and Paper Research Institute). In our research, we have first concentrated on the determination of sulphate in waters of paper industry. The method used for detection of sulphate is based on indirect-UV detection with CE, where the background electrolyte (BGE) is an absorbing mixture of secondary amines. The whole procedure for quantification of sulphate is performed within 15 minutes, after which a new sample is analyzed automatically. The only sample pretreatment is filtration, which is necessary before analysis. The concentrations of sulphate in process waters tested were between 300 and 800 ppm. Our tests show that a simultaneous determination of chloride, sulphate, nitrate, nitrite, sulphite, carbonate and oxalate is also

  4. 77 FR 55811 - Manufacturing Extension Partnership Advisory Board On-line Open Meeting

    Science.gov (United States)

    2012-09-11

    ... National Institute of Standards and Technology Manufacturing Extension Partnership Advisory Board On-line... Manufacturing Extension Partnership (MEP) Advisory Board will hold an open, on-line meeting via webcast on... their remote location. Questions regarding the on-line meeting should be sent to the...

  5. Women Physicians Are Early Adopters of On-Line Continuing Medical Education

    Science.gov (United States)

    Harris, John M., Jr.; Novalis-Marine, Cheryl; Harris, Robin B.

    2003-01-01

    Introduction: On-line continuing medical education (CME) provides advantages to physicians and to medical educators. Although practicing physicians increasingly use on-line CME to meet their educational needs, the overall use of on-line CME remains limited. There are few data to describe the physicians who use this new educational medium; yet,…

  6. Development of on-line laser power monitoring system

    Science.gov (United States)

    Ding, Chien-Fang; Lee, Meng-Shiou; Li, Kuan-Ming

    2016-03-01

    Since the laser was invented, laser has been applied in many fields such as material processing, communication, measurement, biomedical engineering, defense industries and etc. Laser power is an important parameter in laser material processing, i.e. laser cutting, and laser drilling. However, the laser power is easily affected by the environment temperature, we tend to monitor the laser power status, ensuring there is an effective material processing. Besides, the response time of current laser power meters is too long, they cannot measure laser power accurately in a short time. To be more precisely, we can know the status of laser power and help us to achieve an effective material processing at the same time. To monitor the laser power, this study utilize a CMOS (Complementary metal-oxide-semiconductor) camera to develop an on-line laser power monitoring system. The CMOS camera captures images of incident laser beam after it is split and attenuated by beam splitter and neutral density filter. By comparing the average brightness of the beam spots and measurement results from laser power meter, laser power can be estimated. Under continuous measuring mode, the average measuring error is about 3%, and the response time is at least 3.6 second shorter than thermopile power meters; under trigger measuring mode which enables the CMOS camera to synchronize with intermittent laser output, the average measuring error is less than 3%, and the shortest response time is 20 millisecond.

  7. On-Line Condition Monitoring using Computational Intelligence

    CERN Document Server

    Vilakazi, C B; Mautla, P; Moloto, E

    2007-01-01

    This paper presents bushing condition monitoring frameworks that use multi-layer perceptrons (MLP), radial basis functions (RBF) and support vector machines (SVM) classifiers. The first level of the framework determines if the bushing is faulty or not while the second level determines the type of fault. The diagnostic gases in the bushings are analyzed using the dissolve gas analysis. MLP gives superior performance in terms of accuracy and training time than SVM and RBF. In addition, an on-line bushing condition monitoring approach, which is able to adapt to newly acquired data are introduced. This approach is able to accommodate new classes that are introduced by incoming data and is implemented using an incremental learning algorithm that uses MLP. The testing results improved from 67.5% to 95.8% as new data were introduced and the testing results improved from 60% to 95.3% as new conditions were introduced. On average the confidence value of the framework on its decision was 0.92.

  8. EXPANDING ACADEMIC VOCABULARY WITH AN INTERACTIVE ON-LINE DATABASE

    Directory of Open Access Journals (Sweden)

    Marlise Horst

    2005-05-01

    Full Text Available University students used a set of existing and purpose-built on-line tools for vocabulary learning in an experimental ESL course. The resources included concordance, dictionary, cloze-builder, hypertext, and a database with interactive self-quizzing feature (all freely available at www.lextutor.ca. The vocabulary targeted for learning consisted of (a Coxhead's (2000 Academic Word List, a list of items that occur frequently in university textbooks, and (b unfamiliar words students had met in academic texts and selected for entry into the class database. The suite of tools were designed to foster retention by engaging learners in deep processing, an aspect that is often described as missing in computer exercises for vocabulary learning. Database entries were examined to determine whether context sentences supported word meanings adequately and whether entered words reflected the unavailability of cognates in the various first languages of the participants. Pre- and post-treatment performance on tests of knowledge of words targeted for learning in the course were compared to establish learning gains. Regression analyses investigated connections between use of specific computer tools and gains.

  9. The on-line low temperature nuclear orientation facility NICOLE

    Science.gov (United States)

    Ohtsubo, T.; Roccia, S.; Stone, N. J.; Stone, J. R.; Gaulard, C.; Köster, U.; Nikolov, J.; Simpson, G. S.; Veskovic, M.

    2017-04-01

    We review major experiments and results obtained by the on-line low temperature nuclear orientation method at the NICOLE facility at ISOLDE, CERN since the year 2000 and highlight their general physical impact. This versatile facility, providing a large degree of controlled nuclear polarization, was used for a long-standing study of magnetic moments at shell closures in the region Z = 28, N = 28–50 but also for dedicated studies in the deformed region around A ∼ 180. Another physics program was conducted to test symmetry in the weak sector and constrain weak coupling beyond V–A. Those two programs were supported by careful measurements of the involved solid state physics parameters to attain the full sensitivity of the technique and provide interesting interdisciplinary results. Future plans for this facility include the challenging idea of measuring the beta–gamma–neutron angular distributions from polarized beta delayed neutron emitters, further test of fundamental symmetries and obtaining nuclear structure data used in medical applications. The facility will also continue to contribute to both the nuclear structure and fundamental symmetry test programs.

  10. The Efficiency of the On-line Samplings

    Directory of Open Access Journals (Sweden)

    Ileana Gabriela NICULESCU-ARON

    2006-01-01

    Full Text Available The rapid growth of the technology from the last decades led to the collateral development of many other sciences. One of the most important inventions was the Internet and the web technologies with a tremendous impact on the society. Statistics, as a social science, at its turn in ongoing development has only to gain from that. Lately, the on line sampling technique greatly developed. Each web site of a certain importance includes in various forms of the questionnaires. These vary from a mere question to lengthy ones and are a part of daily life of those who access the World Wide Web. The main question is how feasible are the results derived from these samplings as the main issue is the representativiness. A nonrepresentative sampling is a futile one. It is a more convenient solution to post a question on the web page and to wait for an answer from the page’s visitors? But how representative is this answer for the target audience? The present paper aims to list the on-lone methodology as well as analyze their efficiency through presenting their advantages and drawbacks.

  11. Using on-line altered auditory feedback treating Parkinsonian speech

    Science.gov (United States)

    Wang, Emily; Verhagen, Leo; de Vries, Meinou H.

    2005-09-01

    Patients with advanced Parkinson's disease tend to have dysarthric speech that is hesitant, accelerated, and repetitive, and that is often resistant to behavior speech therapy. In this pilot study, the speech disturbances were treated using on-line altered feedbacks (AF) provided by SpeechEasy (SE), an in-the-ear device registered with the FDA for use in humans to treat chronic stuttering. Eight PD patients participated in the study. All had moderate to severe speech disturbances. In addition, two patients had moderate recurring stuttering at the onset of PD after long remission since adolescence, two had bilateral STN DBS, and two bilateral pallidal DBS. An effective combination of delayed auditory feedback and frequency-altered feedback was selected for each subject and provided via SE worn in one ear. All subjects produced speech samples (structured-monologue and reading) under three conditions: baseline, with SE without, and with feedbacks. The speech samples were randomly presented and rated for speech intelligibility goodness using UPDRS-III item 18 and the speaking rate. The results indicted that SpeechEasy is well tolerated and AF can improve speech intelligibility in spontaneous speech. Further investigational use of this device for treating speech disorders in PD is warranted [Work partially supported by Janus Dev. Group, Inc.].

  12. Chromatographic on-line detection of bioactives in food

    Directory of Open Access Journals (Sweden)

    Remmelt Van der Werf

    2013-08-01

    Full Text Available ABSTRACTFindings were focused on the anti-oxidative activity of numerous fruits and vegetables by means of an on-line HPLC radical scavenging detection method. The reactant used was the ABTS•+ green radical cation. The system has been optimized in terms of reactor design, and chemical reactions kinetics. It has been qualified to classify molecules in order of their increasing activity to scavenge exogenous radicals. It may be used as a powerful high resolution screening tool to investigate the radical scavenging activities of natural plants. Bioassays consisting in cellular in vitro antioxidant assay using pancreatic β-cells have been used to confirm the bioactivity of the selected micronutrients. This study demonstrated that it is possible to screen at the molecular level, the bioactivity of numerous natural samples and to point out the richness of the local biodiversity in terms of natural resource of functional food ingredients usable for their potential benefits for consumer’s health, wellbeing and wellaging.Key words: HPLC radical scavenging detection method, bioactivity of natural samples

  13. On-line catalytic upgrading of biomass fast pyrolysis products

    Institute of Scientific and Technical Information of China (English)

    LU Qiang; ZHU XiFeng; LI WenZhi; ZHANG Ying; CHEN DengYu

    2009-01-01

    Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was employed to achieve fast pyrolysis of biomass and on-line analysis of the pyrolysis vapors. Four biomass materials (poplar wood, fir wood, cotton straw and rice husk) were pyrolyzed to reveal the difference among their products. Moreover, catalytic cracking of the pyrolysis vapors from cotton straw was performed by using five catalysts, including two microporous zeolites (HZSM-5 and HY) and three mesoporous catalysts (ZrO2&TiO2, SBA-15 and AI/SBA-15). The results showed that the distribution of the pyrolytic products from the four materials differed a little from each other, while catalytic cracking could significantly alter the pyrolytic products. Those important primary pyrolytic products such as levoglucosen, hydroxyacetaldehyde and 1-hydroxy-2-propanone were decreased greatly after catalysis. The two microporous zeolites were ef-fective to generate high yields of hydrocarbons, while the three mesoporous materials favored the formation of furan, furfural and other furan compounds, as well as acetic acid.

  14. Virtual laboratories: Collaborative environments and facilities-on-line

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, C.E. Jr. [Oak Ridge National Lab., TN (United States). I and C Div.; Cavallini, J.S.; Seweryniak, G.R.; Kitchens, T.A.; Hitchcock, D.A.; Scott, M.A.; Welch, L.C. [Dept. of Energy, Germantown, MD (United States). Mathematical Information, and Computational Sciences Div.; Aiken, R.J. [Dept. of Energy, Germantown, MD (United States). Mathematical Information, and Computational Sciences Div.]|[Lawrence Livermore National Lab., CA (United States); Stevens, R.L. [Argonne National Lab., IL (United States). Mathematics and Computer Sciences Div.

    1995-07-01

    The Department of Energy (DOE) has major research laboratories in a number of locations in the US, typically co-located with large research instruments or research facilities valued at tens of millions to even billions of dollars. Present budget exigencies facing the entire nation are felt very deeply at DOE, just as elsewhere. Advances over the last few years in networking and computing technologies make virtual collaborative environments and conduct of experiments over the internetwork structure a possibility. The authors believe that development of these collaborative environments and facilities-on-line could lead to a ``virtual laboratory`` with tremendous potential for decreasing the costs of research and increasing the productivity of their capital investment in research facilities. The majority of these cost savings would be due to increased productivity of their research efforts, better utilization of resources and facilities, and avoiding duplication of expensive facilities. A vision of how this might all fit together and a discussion of the infrastructure necessary to enable these developments is presented.

  15. On-line Detection of Gas Pipeline Based on the Real-Time Algorithm and Network Technology with Robot

    Institute of Scientific and Technical Information of China (English)

    YAN Bo; YAN Guo-zheng; DING Guo-qing; ZHOU Bing; FU Xi-guang; ZUO Jian-yong

    2004-01-01

    The detection system integrates control technology, network technology, video encoding and decoding, video transmiss-ion, multi-single chip microcomputer communication, dat-abase technology, computer software and robot technology. The robot can adaptively adjust its status according to diameter (from 400 mm to 650 mm) of pipeline. The maximum detection distance is up to 1 000 m. The method of video coding in the system is based on fractal transformation. The experiments show that the coding scheme is fast and good PSNR. The precision of on-line detection is up to 3% thickness of pipeline wall. The robot can also have a high precision of location up to 0.03 m. The control method is based on network and characterized by on-line and real-time. The experiment in real gas pipeline shows that the performance of the detection system is good.

  16. A multisyringe flow-through sequential extraction system for on-line monitoring of orthophosphate in soils and sediments

    DEFF Research Database (Denmark)

    Buanuam, Janya; Miró, Manuel; Hansen, Elo Harald

    2007-01-01

    A fully automated flow-through microcolumn fractionation system with on-line post-extraction derivatization is proposed for monitoring of orthophosphate in solid samples of environmental relevance. The system integrates dynamic sequential extraction using 1.0 mol l-1 NH4Cl, 0.1 mol l-1 NaOH and 0.......5 mol l-1 HCl as extractants according to the Hietjles-Lijklema (HL) scheme for fractionation of phosphorus associated with different geological phases, and on-line processing of the extracts via the Molybdenum Blue (MB) reaction by exploiting multisyringe flow injection as the interface between...... the solid containing microcolumn and the flow-through detector. The proposed flow assembly, capitalizing on the features of the multicommutation concept, implies several advantages as compared to fractionation analysis in the batch mode in terms of saving of extractants and MB reagents, shortening...

  17. Worldwide On-line Distance Learning University Astronomy

    Science.gov (United States)

    Eyres, S. P. S.; Hassall, B. J. M.; Butchart, I.; Bromage, G. E.

    2006-08-01

    The University of Central Lancashire operates a suite of distance learning courses in Astronomy, available both on-line and via CD-ROM. The courses are available worldwide, and emphasise flexibility of study. To this end students can study anything from a single module (1/6^th of a full year at degree level) all the way up to an entire degree entirely by distance learning. Study rates vary from one to four modules each year, and students can move on to Level 2 modules (equivalent to second year level in a UK degree) before completing the full set of Level 1 modules. Over 1000 awards have been made to date. The core syllabus is Astronomy and Cosmology at Level 1, alongside skills in literature research, using computers, and basic observing. We also offer a basic history of European astronomy. At Level 2 we look at the astrophysics of the Sun, the stars, and galaxies including the Milky Way. By Level 3 students are expected to engage in a large individual project, and a collaborative investigation with other students, alongside high-level courses in cosmology, relativity, extreme states of matter and the origins of the elements, life and astronomical objects. While many students are retired people looking to exercise their brains, keen amateur amateurs or professionals with disposable incomes, and significant fraction are teachers seeking to improve their subject knowledge or high school students gaining an edge in the UK University entrance competition. Via our involvement with SALT we offer our courses to members of previously disadvantaged communities. This leads to an incredibly diverse and lively student body.

  18. On-line updating of a distributed flow routing model - River Vistula case study

    Science.gov (United States)

    Karamuz, Emilia; Romanowicz, Renata; Napiorkowski, Jaroslaw

    2015-04-01

    This paper presents an application of methods of on-line updating in the River Vistula flow forecasting system. All flow-routing codes make simplifying assumptions and consider only a reduced set of the processes known to occur during a flood. Hence, all models are subject to a degree of structural error that is typically compensated for by calibration of the friction parameters. Calibrated parameter values are not, therefore, physically realistic, as in estimating them we also make allowance for a number of distinctly non-physical effects, such as model structural error and any energy losses or flow processes which occur at sub-grid scales. Calibrated model parameters are therefore area-effective, scale-dependent values which are not drawn from the same underlying statistical distribution as the equivalent at-a-point parameter of the same name. The aim of this paper is the derivation of real-time updated, on-line flow forecasts at certain strategic locations along the river, over a specified time horizon into the future, based on information on the behaviour of the flood wave upstream and available on-line measurements at a site. Depending on the length of the river reach and the slope of the river bed, a realistic forecast lead time, obtained in this manner, may range from hours to days. The information upstream can include observations of river levels and/or rainfall measurements. The proposed forecasting system will integrate distributed modelling, acting as a spatial interpolator with lumped parameter Stochastic Transfer Function models. Daily stage data from gauging stations are typically available at sites 10-60 km apart and test only the average routing performance of hydraulic models and not their ability to produce spatial predictions. Application of a distributed flow routing model makes it possible to interpolate forecasts both in time and space. This work was partly supported by the project "Stochastic flood forecasting system (The River Vistula reach

  19. Electrospray micromixer chip for on-line derivatization and kinetic studies.

    Science.gov (United States)

    Abonnenc, Mélanie; Dayon, Loïc; Perruche, Brice; Lion, Niels; Girault, Hubert H

    2008-05-01

    An electrospray microchip for mass spectrometry comprising an integrated passive mixer to carry out on-chip chemical derivatizations is described. The microchip fabricated using UV-photoablation is composed of two microchannels linked together by a liquid junction. Downstream of this liquid junction, a mixing unit made of parallel oblique grooves is integrated to the microchannel in order to create flow perturbations. Several mixer designs are evaluated. The mixer efficiency is investigated both by fluorescence study and mass spectrometric monitoring of the tagging reaction of cysteinyl peptides with 1,4-benzoquinone. The comparisons with a microchip without a mixing unit and a kinetic model are used to assess the efficiency of the mixer showing tagging kinetics close to that of bulk reactions in an ideally mixed reactor. As an ultimate application, the electrospray micromixer is implemented in a LC-MS workflow. On-line derivatization of albumin tryptic peptides after a reversed-phase separation and counting of their cysteines drastically enhance the protein identification.

  20. [Hemodiafiltration with on-line production of bicarbonate infusate: 5 years of clinical experience].

    Science.gov (United States)

    Canaud, B; N'Guyen, Q V; Bouloux-Polito, C; Stec, F; Mion, C

    1992-01-01

    Despite its potential advantages HDF has not gained large clinical acceptance among nephrologist due to its technical complexity and to the large quantity of pharmaceutical substitution fluid needed. HDF with on-line production of substitution fluid from dialysate simplifies the procedure and reduces the cost of treatment session. We treated regularly 13 high risk and/or non-compliant patients (9 males, 4 females) with HDF for 46 +/- 17 months. HDF program consisted of 3 sessions weekly lasting 210 +/- 10 mn with blood flow rate 350 +/- 20 ml/mn and fluid volume exchange of 20 liters/session. High flux dialyzers (HF80, Filtral 16) were reused 6 to 13 times automatically on a Renatron machine with peroxyacetic acid solution as sole cleaning and disinfecting agent. Microbiologic quality of infusate was assessed by membrane filtration culturing method and LAL endotoxin determination. 3937 HDF sessions were performed. 57.140 I of substitution fluid were infused IV to patients. Eight pyrogenic reactions were observed: 2 due to septicemia related to catheter infection and 6 from unknown origin. Adequacy of program was achieved in all patients. Blood pressure control was satisfactorily obtained without antihypertensive medication in 12/13 patients. Effective weekly integrated urea clearances was 150 +/- 15 l/wk, KT/V index was 1.50 +/- 0.10, urea TAC 20 +/- 2 mM/l and protein catabolic rate 1.40 +/- 0.10 g/kg/24 h. We conclude that HDF with on-line production of bicarbonate substitution fluid is a safe and highly efficient method cost-competitive with bicarbonate HD, which offers an interesting alternative for renal replacement therapy.

  1. Development of an on-line radiation detection and measurements laboratory course

    Science.gov (United States)

    Kopp, Derick G.

    An on-line radiation detection and measurements lab is being developed with a grant from the U.S. Nuclear Regulatory Commission. The on-line laboratory experiments are designed to provide a realistic laboratory experience and will be offered to students at colleges/universities where such a course is not offered. This thesis presents four web-based experiments: 1) nuclear electronics, 2) gamma-ray spectroscopy with scintillation detectors, 3) gamma-ray attenuation in matter and external dosimetry, and 4) alpha spectroscopy and absorption in matter. The students access the experiments through a broad-band internet connection. Computer-controlled instrumentation developed in National Instruments (NI) LabVIEW(TM) communicates with the URSA-II (SE International, Inc.) data acquisition system, which controls the detector bias voltage, pulse shaping, amplifier gain, and ADC. Detector and amplifier output pulses can be displayed with other instrumentation developed in LabVIEW(TM) for the digital oscilloscope (USB-5132, NI). Additional instrumentation developed in LabVIEW(TM) is used to control the positions of all sources with stepper motor controllers (VXM-1, Velmex, Inc.) and to adjust pressure in the alpha chamber with a digital vacuum regulator (Model 200, J-KEM, Inc.). Unique interactive interfaces are created by integrating all of the necessary instrumentation to conduct each lab. These interfaces provide students with seamless functionality for data acquisition, experimental control, and live data display with real-time updates for each experiment. A webcam is set up to stream the experiment live so the student can observe the physical instruments and receive visual feedback from the system in real time.

  2. On-line MR imaging for dose validation of abdominal radiotherapy

    Science.gov (United States)

    Glitzner, M.; Crijns, S. P. M.; de Senneville, B. Denis; Kontaxis, C.; Prins, F. M.; Lagendijk, J. J. W.; Raaymakers, B. W.

    2015-11-01

    For quality assurance and adaptive radiotherapy, validation of the actual delivered dose is crucial. Intrafractional anatomy changes cannot be captured satisfactorily during treatment with hitherto available imaging modalitites. Consequently, dose calculations are based on the assumption of static anatomy throughout the treatment. However, intra- and interfraction anatomy is dynamic and changes can be significant. In this paper, we investigate the use of an MR-linac as a dose tracking modality for the validation of treatments in abdominal targets where both respiratory and long-term peristaltic and drift motion occur. The on-line MR imaging capability of the modality provides the means to perform respiratory gating of both delivery and acquisition yielding a model-free respiratory motion management under free breathing conditions. In parallel to the treatment, the volumetric patient anatomy was captured and used to calculate the applied dose. Subsequently, the individual doses were warped back to the planning grid to obtain the actual dose accumulated over the entire treatment duration. Ultimately, the planned dose was validated by comparison with the accumulated dose. Representative for a site subject to breathing modulation, two kidney cases (25 Gy target dose) demonstrated the working principle on volunteer data and simulated delivery. The proposed workflow successfully showed its ability to track local dosimetric changes. Integration of the on-line anatomy information could reveal local dose variations  -2.3-1.5 Gy in the target volume of a volunteer dataset. In the adjacent organs at risk, high local dose errors ranging from  -2.5 to 1.9 Gy could be traced back.

  3. Rapid, one-pot derivatization and distillation of chlorophenols from solid samples with their on-line enrichment.

    Science.gov (United States)

    Ganeshjeevan, R; Chandrasekar, Raghavan; Kadigachalam, Parasuraman; Radhakrishnan, Ganga

    2007-01-26

    A microwave-assisted steam distillation (MASD) sample preparation technique for extracting chlorophenols from solid samples was studied. This open vessel microwave system based study developed as an integrated method since it has incorporated extractive distillation, derivatization and on-line enrichment. Gas chromatography (GC) with electron-capture detection was used for the analysis. The study involved optimization of MASD parameters and on-line enrichments using spiked solid samples. MASD achieved recoveries for spiked soil samples in the range of 94-101% within 20min with a collection of only 20ml distillate facilitating on-line enrichment. Some real samples were analyzed that included soil, wood, leather, textiles, dyes and certified reference materials of soil and wood samples. Limit of detection values of 12ng/g for pentachlorophenol and 194ng/g for monochlorophenol were found. Recoveries of 96.6% in the case of soil certified reference material (CRM) with RSD 2.7% and 80.6% in the case of wood CRM with RSD 3.3% were observed in this study. MASD studied found to produce very clean extracts in comparison to reference techniques.

  4. Semi-on-line analysis for fast and precise monitoring of bioreaction processes

    DEFF Research Database (Denmark)

    Christensen, L.H.; Marcher, J.; Schulze, Ulrik

    1996-01-01

    Monitoring of substrates and products during fermentation processes can be achieved either by on-line, in situ sensors or by semi-on-line analysis consisting of an automatic sampling step followed by an ex situ analysis of the retrieved sample. The potential risk of introducing time delays...... and signal bias during sampling makes it necessary to distinguish between real-time, on-line, in situ methods and semi-on-line analysis. In addition, semi-on-line analyzers are often mechanically complex-a circumstance which has to be given special attention during their industrial use on a routine basis....... This review on semi-on-line analysis will focus both on the dynamics and precision of aseptic sampling devices and on the performance of flow injection analysis (FIA) and sequential injection analysis (SIA), especially with regard to their robustness when used in industry. (C) 1996 John Wiley & Sons, Inc....

  5. On-line determination of anions in pulp mills by capillary electrophoresis (CE); Tehdasoloissa tapahtuva anionien kapillaarielektroforeettinen on-line maeaeritys ja sen hyoedyntaeminen prosessivalvonnassa - MPKY 02

    Energy Technology Data Exchange (ETDEWEB)

    Kokkonen, R.; Holmberg, M.; Vainikka, V. [Finnish Pulp and Paper Research Institute, Espoo (Finland)

    1998-12-31

    The aim of the study was to set-up a process control system for on-line measurement of certain anions. Typical anions which forms precipitates in pulp and paper mills are oxalate, carbonate and sulphate. Thus it is important to develop a continuous process analyzing system to control concentration levels of this anions. For the preliminary tests of continuous determinations of chloride and sulphate anions in tap water a simple on-line system was build in KCL (The Finnish Pulp and Paper Research Institute) and connected to a capillary electroforesis apparatus. In the preliminary tests a chromate buffer (ph = 7.6) was used. Separation of chloride and sulphate was excellent but the stability of buffer was not good enough and it was usable only for few hours. After experimental studies VTT developed a stable capillary electrophoresis method based on mixed amine buffer and this was selected for an on-line method for determination of anions in process waters of the pulp and paper industry. In the preliminary on-line test (r = 20) repeatabilities of migration times of sulphate and chloride with the chromate buffer were < 5 % (RSD) and peak heights < 15 % (RSD). With the mixed amine buffer repeatabilities were better. The preliminary tests showed that it is possible to connect a capillary electrophoresis system to on-line measurements. For the moment no commercial on-line CE apparatus is available. (orig.)

  6. On-line Scheduling Algorithm for Penicillin Fed-batch Fermentation

    Institute of Scientific and Technical Information of China (English)

    XUE Yao-feng; YUAN Jing-qi

    2005-01-01

    An on-line scheduling algorithm to maximize gross profit of penicillin fed-batch fermentation is proposed. According to the on-line classification method, fed-batch fermentation batches are classified into three categories. Using the scheduling strategy, the optimal termination sequence of batches is obtained. Pseudo on-line simulations for testing the proposed algorithm with the data from industrial scale penicillin fermentation are carried out.

  7. The significance of crop co-states for receding horizon optimal control of greenhouse climate

    NARCIS (Netherlands)

    Straten, van G.; Willigenburg, van L.G.; Tap, R.F.

    2002-01-01

    While a tomato crop grows on the time-scale of weeks, the greenhouse climate changes on a time-scale of minutes. The economic optimal control problem of producing good quality crops against minimum input of resources is tackled by a two time-scale decomposition. First, the sub-problem associated to

  8. An On-line Assessment System for English-Chinese Translation

    Institute of Scientific and Technical Information of China (English)

    TIAN Yan; LU Ru-zhan; DUAN Jian-yong

    2007-01-01

    On-line assessment of English-Chinese translation is a challenging task as it involves natural language processing. YanFa, an on-line assessment system for English-Chinese translation, is a pilot research project into scoring student's translation on-line. Based on the theory of translation equivalence, an algorithm called "conceptual similarity matching" was developed. YanFa can assess students' translation on-line timely, generate test papers automatically, offer standard versions of translation, and the scores of each sentence to students. The evaluation proves that YanFa is practical compared with the scores given by experts.

  9. On-Line Booking Policies and Competitive Analysis of Medical Examination in Hospital

    Directory of Open Access Journals (Sweden)

    Li Luo

    2014-01-01

    Full Text Available From the on-line point, we consider the hospital’s medical examination appointment problem with hierarchical machines. This approach eliminates the need for both demand forecasts and a risk-neutrality assumption. Due to different unit revenue, uncertain demand, and arrival of patients, we design on-line booking policies for two kinds of different situations from the perspective of on-line policy and competitive analysis. After that, we prove the optimal competitive ratios. Through numerical examples, we compare advantages and disadvantages between on-line policies and traditional policies, finding that there is different superiority for these two policies under different arrival sequences.

  10. BOOK REVIEW: ON-LINE EDUCATION: AN EMANCIPATING VISION

    Directory of Open Access Journals (Sweden)

    Reviewed by Dr. Abdullah KUZU

    2006-04-01

    Full Text Available ON-LINE EDUCATION: AN EMANCIPATING VISION Written by Margarita Victoria Gomez Publisher: Cortez Editora ISBN 85-249-1062-3 São Paulo, Brazil, July 2004. Reviewed by Ricardo Romo TORRES Manuel Moreno Castaneda Maria del Sol Orozco Aguirre Universidad de Guadalajara Virtual MEXICO http://www.udgvirtual.udg.mx "On-line Education " is a book that meets the challenge to present itself as an unfinished text. In addition to demanding an active participation of the reader, it requires a predisposition to complete it through an also inconclusive dialogue. Among its goals we can find the search for education networks that remain under constant reconstruction, maintaining the emancipative vision as an imperative for the reconfiguration, as a constituted tissue for the scaffolding of subjects who impress,imagine, think and have a will. The unfinished part is presented in the following paragraph: "Similar to Babel according to Borges, knowledge is the product of a hazard in which fiction is the universe and where, out of fear of its multiple combinations, individual texts constitute an unfinished tale. In this labyrinth-shaped universe, the mirror and the recurrence do not allow finding the way out" page 134. The sense of being of man within a planetary community is framed by the ontological condition of conclusiveness; the requirement of being more, however, as well. This more is guided by the need for dialogue with others in terms of the opening and maintaining an unconcluded dialogue. The idea of a web or network leads to an articulating demand within the context of the category of wholeness. Based on this category, we will be able to present a reticulum of concepts where we can find included the web, subjectivity, identity, experience, mediation and, of course, digital literacy. This reticulum results in a concept of identified education with a condensed arrival point to something that the author defines as 'the pedagogy of virtuality'. The author is

  11. On-line detection of Escherichia coli intrusion in a pilot-scale drinking water distribution system.

    Science.gov (United States)

    Ikonen, Jenni; Pitkänen, Tarja; Kosse, Pascal; Ciszek, Robert; Kolehmainen, Mikko; Miettinen, Ilkka T

    2017-08-01

    Improvements in microbial drinking water quality monitoring are needed for the better control of drinking water distribution systems and for public health protection. Conventional water quality monitoring programmes are not always able to detect a microbial contamination of drinking water. In the drinking water production chain, in addition to the vulnerability of source waters, the distribution networks are prone to contamination. In this study, a pilot-scale drinking-water distribution network with an on-line monitoring system was utilized for detecting bacterial intrusion. During the experimental Escherichia coli intrusions, the contaminant was measured by applying a set of on-line sensors for electric conductivity (EC), pH, temperature (T), turbidity, UV-absorbance at 254 nm (UVAS SC) and with a device for particle counting. Monitored parameters were compared with the measured E. coli counts using the integral calculations of the detected peaks. EC measurement gave the strongest signal compared with the measured baseline during the E. coli intrusion. Integral calculations showed that the peaks in the EC, pH, T, turbidity and UVAS SC data were detected corresponding to the time predicted. However, the pH and temperature peaks detected were barely above the measured baseline and could easily be mixed with the background noise. The results indicate that on-line monitoring can be utilized for the rapid detection of microbial contaminants in the drinking water distribution system although the peak interpretation has to be performed carefully to avoid being mixed up with normal variations in the measurement data. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. On-line monitoring of chemical reactions by using bench-top nuclear magnetic resonance spectroscopy.

    Science.gov (United States)

    Danieli, E; Perlo, J; Duchateau, A L L; Verzijl, G K M; Litvinov, V M; Blümich, B; Casanova, F

    2014-10-06

    Real-time nuclear magnetic resonance (NMR) spectroscopy measurements carried out with a bench-top system installed next to the reactor inside the fume hood of the chemistry laboratory are presented. To test the system for on-line monitoring, a transfer hydrogenation reaction was studied by continuously pumping the reaction mixture from the reactor to the magnet and back in a closed loop. In addition to improving the time resolution provided by standard sampling methods, the use of such a flow setup eliminates the need for sample preparation. Owing to the progress in terms of field homogeneity and sensitivity now available with compact NMR spectrometers, small molecules dissolved at concentrations on the order of 1 mmol L(-1) can be characterized in single-scan measurements with 1 Hz resolution. Owing to the reduced field strength of compact low-field systems compared to that of conventional high-field magnets, the overlap in the spectrum of different NMR signals is a typical situation. The data processing required to obtain concentrations in the presence of signal overlap are discussed in detail, methods such as plain integration and line-fitting approaches are compared, and the accuracy of each method is determined. The kinetic rates measured for different catalytic concentrations show good agreement with those obtained with gas chromatography as a reference analytical method. Finally, as the measurements are performed under continuous flow conditions, the experimental setup and the flow parameters are optimized to maximize time resolution and signal-to-noise ratio.

  13. On-line metabolic pathway analysis based on metabolic signal flow diagram.

    Science.gov (United States)

    Shi, H; Shimizu, K

    In this work, an integrated modeling approach based on a metabolic signal flow diagram and cellular energetics was used to model the metabolic pathway analysis for the cultivation of yeast on glucose. This approach enables us to make a clear analysis of the flow direction of the carbon fluxes in the metabolic pathways as well as of the degree of activation of a particular pathway for the synthesis of biomaterials for cell growth. The analyses demonstrate that the main metabolic pathways of Saccharomyces cerevisiae change significantly during batch culture. Carbon flow direction is toward glycolysis to satisfy the increase of requirement for precursors and energy. The enzymatic activation of TCA cycle seems to always be at normal level, which may result in the overflow of ethanol due to its limited capacity. The advantage of this approach is that it adopts both virtues of the metabolic signal flow diagram and the simple network analysis method, focusing on the investigation of the flow directions of carbon fluxes and the degree of activation of a particular pathway or reaction loop. All of the variables used in the model equations were determined on-line; the information obtained from the calculated metabolic coefficients may result in a better understanding of cell physiology and help to evaluate the state of the cell culture process. Copyright 1998 John Wiley & Sons, Inc.

  14. Incorporating Oracle on-line space management with long-term archival technology

    Science.gov (United States)

    Moran, Steven M.; Zak, Victor J.

    1996-01-01

    The storage requirements of today's organizations are exploding. As computers continue to escalate in processing power, applications grow in complexity and data files grow in size and in number. As a result, organizations are forced to procure more and more megabytes of storage space. This paper focuses on how to expand the storage capacity of a Very Large Database (VLDB) cost-effectively within a Oracle7 data warehouse system by integrating long term archival storage sub-systems with traditional magnetic media. The Oracle architecture described in this paper was based on an actual proof of concept for a customer looking to store archived data on optical disks yet still have access to this data without user intervention. The customer had a requirement to maintain 10 years worth of data on-line. Data less than a year old still had the potential to be updated thus will reside on conventional magnetic disks. Data older than a year will be considered archived and will be placed on optical disks. The ability to archive data to optical disk and still have access to that data provides the system a means to retain large amounts of data that is readily accessible yet significantly reduces the cost of total system storage. Therefore, the cost benefits of archival storage devices can be incorporated into the Oracle storage medium and I/O subsystem without loosing any of the functionality of transaction processing, yet at the same time providing an organization access to all their data.

  15. On-Line Automatic Visual Inspection Of Internal Surfaces

    Science.gov (United States)

    Closier, M. J.; Sood, S. C.

    1983-08-01

    The Research and Development Department at Peerless Control Systems Limited, at Milton Keynes is developing an Automatic Visual Inspection System for inspecting internal surfaces. The system will automatically inspect and measure useful parameters (ie. longitudinal distances, internal hole diameters, screw threads, pitches, surface, finish quality) and detect defects of types which may be due to machining marks, material defects, and inclusions due to environmental contamination Leg. rust, stains, smears, etc.). The system consists of special customized optics and a dedicated real time computer system with its integral image processing and display system. The final production version will be a customized, dedicated micro processor based system. The customized optics implement optical sensing of imaging data of internal surfaces. The optics are linked to a specialised image converter which is interfaced to a computer system. The software developed at P.C.S. provides the image analysis of the internal surface, thus providing auto-inspection variables, which can be applied to numerous industrial and scientific inspection tasks. The machine will be capable of being used on the production line with an inspection time of a few seconds. Automatic mechanical handling can be incorporated within the above system to save routine handling tasks. This Automatic Inspection System reduces internal surface inspection time, maintains consistent higher quality inspection specifications resulting in a cost time saving, economic utilization of raw materials and increased output.

  16. BUILDING ROBUST APPEARANCE MODELS USING ON-LINE FEATURE SELECTION

    Energy Technology Data Exchange (ETDEWEB)

    PORTER, REID B. [Los Alamos National Laboratory; LOVELAND, ROHAN [Los Alamos National Laboratory; ROSTEN, ED [Los Alamos National Laboratory

    2007-01-29

    In many tracking applications, adapting the target appearance model over time can improve performance. This approach is most popular in high frame rate video applications where latent variables, related to the objects appearance (e.g., orientation and pose), vary slowly from one frame to the next. In these cases the appearance model and the tracking system are tightly integrated, and latent variables are often included as part of the tracking system's dynamic model. In this paper we describe our efforts to track cars in low frame rate data (1 frame/second) acquired from a highly unstable airborne platform. Due to the low frame rate, and poor image quality, the appearance of a particular vehicle varies greatly from one frame to the next. This leads us to a different problem: how can we build the best appearance model from all instances of a vehicle we have seen so far. The best appearance model should maximize the future performance of the tracking system, and maximize the chances of reacquiring the vehicle once it leaves the field of view. We propose an online feature selection approach to this problem and investigate the performance and computational trade-offs with a real-world dataset.

  17. Enhancing On-Line Teaching with Verbal Immediacy through Self-Determination Theory

    Science.gov (United States)

    Furlich, Stephen A.

    2013-01-01

    This paper explores the use of instructor verbal immediacy behaviors for on-line classes. Specifically, it demonstrates how instructor verbal immediacy behaviors found in face-to-face classes can also be displayed for on-line classes. It is argued that self-determination theory describes identification of the student as an important role in the…

  18. A novel, optical, on-line bacteria sensor for monitoring drinking water quality

    DEFF Research Database (Denmark)

    Højris, Bo; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen;

    2016-01-01

    Today, microbial drinking water quality is monitored through either time-consuming laboratory methods or indirect on-line measurements. Results are thus either delayed or insufficient to support proactive action. A novel, optical, on-line bacteria sensor with a 10-minute time resolution has been...... conditions such as pollution events in drinking water....

  19. Analyze On-line Star Economy Basing on Models of Entrepreneurship

    Institute of Scientific and Technical Information of China (English)

    胡志豪

    2016-01-01

    The outstanding performance of the On-line Star Economy is bound up with social media and promotion by fans, stimulating a new round of consumption upgrading and capital tendency. There is no denying that the On-line Star Economy may be the fortuitous outcome of the times. But the fact remains it can be analyzed rationally using Models of Entrepreneurship.

  20. On-line monitoring and control of animal-cell cultures

    NARCIS (Netherlands)

    Pol, van der J.J.

    1996-01-01


    On-line analysis and control of biotechnological processes is still the stepchild in industry. In general, only parameters as dissolved-oxygen concentration, pH and temperature are controlled on-line. Important parameters as substrate and inhibitor concentrations are only measured

  1. On-Line Multichannel Raman Spectroscopic Detection System For Capillary Zone Electrophoresis

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An on-line multichannel Raman spectroscopic detection system for capillary electrophoresis was established by using an Ar+ laser and a cryogenically cooled ICCD. Resonant excitation Raman spectra of methyl red and methyl orange were employed to test the system. The result shows that it could yield on-line electrophoretogram and time series of Raman spectra.

  2. High School Open On-Line Courses (HOOC): A Case Study from Italy

    Science.gov (United States)

    Canessa, Enrique; Pisani, Armando

    2013-01-01

    The first implementation of complete high school, open on-line courses (HOOC) aiming to support the training and basic scientific knowledge of young students from the Liceo Ginnasio Dante Alighieri in Gorizia, Italy, is discussed. Using the open source and automated recording system openEyA, HOOC give a student the opportunity to watch on-line, at…

  3. Challenges and opportunities in ‘last mile’ logistics for on-line food retail

    NARCIS (Netherlands)

    Trienekens, Jacques; Hvolby, Hans Henrik; Turner, Paul

    2017-01-01

    Conventional approaches to logistics for food retail continue to be challenged by the rapid growth of on-line food retail. At the same time, ‘last mile’ logistics optimization for on-line retail also face challenges as changing consumer expectations, habits and purchasing patterns intersect with

  4. A New Method of On-line Grid Impedance Estimation for PV Inverter

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Asiminoaei, Lucian; Blaabjerg, Frede

    2004-01-01

    for on-line measuring the grid impedance is presented. The presented method requires no extra hardware being accommodated by typical PV inverters, sensors and CPU, to provide a fast and low cost approach of on-line impedance measurement. By injecting a non-characteristic harmonic current and measuring...

  5. The Anatomy of Program Design for an On-Line Business Management Course

    Science.gov (United States)

    Barger, Bonita

    2008-01-01

    How does one design an on-line course to bridge theory and practice? How can the feedback of on-going stakeholder (student and administration) be incorporated into the design process to enhance quality? This paper presents the theoretical underpinning of designing an on-line management course recognized as best practice for a "well organized…

  6. FEDIX on-line information service: Design, develop, test, and implement an on-line research and education information service. Annual status report, September 1992--August 1993

    Energy Technology Data Exchange (ETDEWEB)

    Rodman, J.A.

    1993-08-01

    Federal Information Exchange, Inc. (FIE) is a diversified information services company that is recognized as the major electronic link between the higher education community and the Federal government in the field of research administration. FIE provides a range of information related services to the government, academic and private sectors, including database management, software development and technical support. FEDIX is the on-line information service designed, developed and implemented by FIE to accomplish the following objectives: (1). Broaden the participation of the education community in Federal research and education programs by providing free and unrestricted on-line access to information from all participating Federal agencies; and (2). Provide the education community with on-line access to a single keyword-searchable system for research and educational funding opportunities at the participating Federal agencies.

  7. El aprendizaje on-line: oportunidades y retos en instituciones politécnicas Apprenticeship Students Learning On-line: Opportunities and Challenges for Polytechnic Institutions

    Directory of Open Access Journals (Sweden)

    Martha Burkle

    2011-10-01

    Full Text Available Este artículo presenta los retos y las oportunidades actuales respecto a la distribución de contenidos virtuales y online en el marco de la institución de educación superior politécnica. Debido a la recesión económica actual, se está produciendo un retorno de estudiantes aprendices al mundo académico con el fin de actualizar habilidades y conocimientos. Sin embargo, a menudo los estudiantes con este perfil no están dispuestos a dejar de lado el trabajo o su vida personal para volver al estudio. En este contexto, el aprendizaje on-line representa una magnífica oportunidad para acceder a contenidos académicos sin tener que dejar de lado el trabajo. No obstante, para garantizar el éxito en la provisión de materiales on-line para estudiantes aprendices, las instituciones politécnicas de todo el mundo deben enfrentar dos retos: la transformación de contenidos de aprendizaje práctico en objetos educativos en línea, y la creación de ambientes educativos en los que los estudiantes se sientan involucrados y participativos. Más aún, en un ambiente de aprendizaje en el que el uso de tecnologías Web 2.0 es primordial, es importante considerar también el nuevo rol del profesor, que se ha convertido en facilitador del aprendizaje. Con el fin de analizar la experiencia educativa on-line de estos estudiantes, se distribuyeron 57 encuestas entre los estudiantes registrados en programas de formación on-line. El artículo presenta las conclusiones de la investigación y las compara con las aportaciones que se han hecho en lo relativo a la nueva generación de estudiantes y su uso de las tecnologías, así como el comportamiento registrado por la muestra de la investigación (preferencias y estilos de aprendizaje, su uso de las nuevas tecnologías. Se plantean igualmente oportunidades innovadoras para conectar aprendizaje y contexto laboral y recomendaciones para futuras investigaciones.This paper presents the ongoing research on the

  8. Dimensional Description of On-line Wear Debris Images for Wear Characterization

    Institute of Scientific and Technical Information of China (English)

    WU Tonghai; PENG Yeping; DU Ying; WANG Junqun

    2014-01-01

    As one of the most wear monitoring indicator, dimensional feature of individual particles has been studied mostly focusing on off-line analytical ferrograph. Recent development in on-line wear monitoring with wear debris images shows that merely wear debris concentration has been extracted from on-line ferrograph images. It remains a bottleneck of obtaining the dimension of on-line particles due to the low resolution, high contamination and particle’s chain pattern of an on-line image sample. In this work, statistical dimension of wear debris in on-line ferrograph images is investigated. A two-step procedure is proposed as follows. First, an on-line ferrograph image is decomposed into four component images with different frequencies. By doing this, the size of each component image is reduced by one fourth, which will increase the efficiency of subsequent processing. The low-frequency image is used for extracting the area of wear debris, and the high-frequency image is adopted for extracting contour. Second, a statistical equivalent circle dimension is constructed by equaling the overall wear debris in the image into equivalent circles referring to the extracted total area and premeter of overall wear debris. The equivalent circle dimension, reflecting the statistical dimension of larger wear debris in an on-line image, is verified by manual measurement. Consequently, two preliminary applications are carried out in gasoline engine bench tests of durability and running-in. Evidently, the equivalent circle dimension, together with the previously developed concentration index, index of particle coverage area (IPCA), show good performances in characterizing engine wear conditions. The proposed dimensional indicator provides a new statistical feature of on-line wear particles for on-line wear monitoring. The new dimensional feature conveys profound information about wear severity.

  9. Escapist Motives for On-line Gaming and Strengthening of Weak Ties

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    Due to advances of technology including faster and ubiquitously ac-cessible Internet connection, on-line gaming have grown tremendously in the last couple of years. The aim of this paper is to investigate whether escapist mo-tives for playing games are linked to strengthening of weak ties through...... on-line gaming. The research investigates Facebook and other on-line games separate-ly. A surprising result is that while most of the investigated escapist motives are positively correlated with strengthening of weak ties, the mundane breaking motive is negatively correlated with strengthening...

  10. Escapist Motives for On-line Gaming and Strengthening of Weak Ties

    DEFF Research Database (Denmark)

    Sudzina, Frantisek; Razmerita, Liana

    Due to advances of technology including faster and ubiquitously accessible Internet connection, on-line gaming have grown tremendously in the last couple of years. The aim of this paper is to investigate whether escapist motives for playing games are linked to strengthening of weak ties through on......-line gaming. The research investigates Facebook and other on-line games separately. A surprising result is that while most of the investigated escapist motives are positively correlated with strengthening of weak ties, the mundane breaking motive is negatively correlated with strengthening of weak ties....

  11. On-line and Model-based Approaches to the Visual Control of Action

    OpenAIRE

    Zhao, Huaiyong; Warren, William H.

    2014-01-01

    Two general approaches to the visual control of action have emerged in last few decades, known as the on-line and model-based approaches. The key difference between them is whether action is controlled by current visual information or on the basis of an internal world model. In this paper, we evaluate three hypotheses: strong on-line control, strong model-based control, and a hybrid solution that combines on-line control with weak off-line strategies. We review experimental research on the co...

  12. Key Technique of Austenitic Stainless Steel on-line Solution Treatment

    Institute of Scientific and Technical Information of China (English)

    LI Sheng-li; LI Wei-juan; LIU Shuang; LI Ying; ZHAO Fei

    2004-01-01

    Generally the methods of solution treatment of austenitic stainless steel are bifurcated on-line solution and off-line solution . For a founded enterprise, it is necessary to find out how to get across alterations and search a measure of on -line solution disposal with less investment and higher efficiency. By studying and analysingin laboratory, several key points and the methods settle them are presented, which offers a new route to realize austenitic stainless steel on-line solution. By reducing the cost greatly, it makes the enterprise larger benefits.

  13. Bench-scale testing of on-line control of column flotation using a novel analyzer

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-22

    This document contains the first quarterly technical progress report for PTI's Bench-Scale Testing Project of a circuit integrating PTI's KEN-FLOTETM Column Flotation Technology and PTI's On-Line Quality Monitor Control System. The twelve-month project will involve installation of a 300 lb/hr. bench-scale testing circuit at PETC's Coal Preparation Process Research Facility (CPPRF) and testing of two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). Figure 1 contains the project plan as well as the approach to completing the major tasks within the twelvemonth project. The project is broken down into three phases, which include: Phase I - Preparation: The preparation phase was performed principally at PTI's Calumet offices from October through December, 1992. It involved building of the equipment and circuitry, as well as some preliminary design and equipment testing. Phase II - ET Circuit Installation and Testing: This installation and testing phase of the project will be performed at PETC's CPPRF from January through May, 1993, and will be the major focus of the project. It will involve testing of the continuous 300 lb/hr. circuit. Phase II - Project Finalization: The project finalization phase will occur from June through September, 1993, at PTI's Calumet offices and will involve finalizing analytical work and data evaluation, as well as final project reporting. This quarterly progress report principally summarizes the results from the Phase I preparation work and the plan for the early portions of the Phase 11 installation and commissioning, which will occur in January and the first week of February, 1993.

  14. Analisis de la adaptacion a la red en las editoriales on line de cinco paises europeos

    National Research Council Canada - National Science Library

    Garcia Orosa, B; Lopez Garcia, X; Gallur Santorum, S

    2013-01-01

    [ES] Introduccion. El articulo analiza los editoriales de periodicos on line de cinco paises europeos con el objetivo principal de realizar una radiografia de sus caracteristicas y su grado de adaptacion a la red. Metodologia...

  15. CODE STEM - Moon, Mars, and Beyond; DLESE-Powered On-Line Classroom Project

    Data.gov (United States)

    National Aeronautics and Space Administration — "CODE (COrps DEvelopment) STEM (Science, Technology, Engineering, and Math) ? Moon Mars and Beyond; DLESE-Powered On-Line Classroom" shares the excitement of...

  16. Learning Survival Models with On-Line Simulation Activities in the Actuarial Science Degree

    National Research Council Canada - National Science Library

    Antonio Fernandez-Morales

    2011-01-01

    The aim of this paper is to describe an on-line survival laboratory designed to enhance teaching and learning in the Statistics courses of the Actuarial Science Degree of the Uni-versity of Málaga...

  17. Development of an on-line state estimator for fed-batch filamentous fungal fermentations

    DEFF Research Database (Denmark)

    Mears, Lisa; Stocks, Stuart M.; Albæk, Mads O.

    Bioprocesses can be challenging to model due to complex and non-linear process dynamics [1]. In addition there is a lack of robust, on-line sensors for key parameters of interest in the field, such as substrate, product and biomass concentration [2]. These factors lead to limitations in the ability...... to monitor and control bioprocess systems. There is therefore an interest in state estimation, in order to model these key process states based on available on-line measurements [1]. This work discusses the application of a first principle model to pilot scale filamentous fungal fermentation systems operated...... pressure [4], [5]. This stoichiometric-based coupled process model is successfully applied on-line as a state estimator in order to predict the biomass and product concentration, from robust, available on-line measurements. Such state estimators will be valuable as part of control strategy development...

  18. On-Line Monitoring of Fermentation Processes by Near Infrared and Fluorescence Spectroscopy

    DEFF Research Database (Denmark)

    Svendsen, Carina

    Monitoring and control of fermentation processes is important to ensure high product yield, product quality and product consistency. More knowledge on on-line analytical techniques such as near infrared and fluorescence spectroscopy is desired in the fermentation industry to increase the efficiency...... of on-line monitoring systems. The primary aim of this thesis is to elucidate and explore the dynamics in fermentation processes by spectroscopy. Though a number of successful on-line lab-scale monitoring systems have been reported, it seems that several challenges are still met, which limits the number...... for on-line monitoring if corrections or preventive measures during the quantification are carried out. The findings presented in this thesis have enabled the possibility of obtaining a better process understanding and to ease monitoring and controlling of fermentation processes....

  19. On Line Spectrophotometric Measurement of Uranium and Nitrate in H Canyon

    Energy Technology Data Exchange (ETDEWEB)

    Lascola, R.J.

    2002-10-15

    This report describes the on-line instrumentation developed by the Analytical Development Section of Savannah River Technology Center in support of Highly Enriched Uranium Blend Down processing in H Canyon.

  20. Using a strengths model to build an on-line nursing education program.

    Science.gov (United States)

    Wieck, K Lynn; Alfred, Danita; Haas, Barbara K; Yarbrough, Susan

    2014-01-01

    The on-line environment is the new frontier for academia struggling to define its place in the evolving economy. A concern is how to engage students who maximize their on-line experience and graduate in a timely manner. A strengths model was used as the basis for development of an on-line doctoral nursing program. Upon entering the program, students were given a strengths assessment that focused both students and faculty on the positive attributes students were bringing to their doctoral studies. A positive feedback methodology using on-line discussions in each course was used to support the identified strengths. The optimal picture of a successful entering doctoral student appears to be a person whose top five strengths are learner, achiever, input, connectedness and responsibility. A strengths model promotes a positive learning environment and supports a teacher-learner dynamic where faculty members are encouraged to focus on the students' strengths rather than their challenges.

  1. First on-line $\\beta$-NMR on oriented nuclei magnetic dipole moments of the $\

    CERN Document Server

    Giles, T; Stone, N J; Van Esbroeck, K; White, G; Wöhr, A; Veskovic, M; Towner, I S; Mantica, P F; Prisciandaro, J I; Morrissey, D J; Fedosseev, V; Mishin, V I; Köster, U; Walters, W B

    2000-01-01

    The first fully on-line use of the angular distribution of $\\beta$ - emission in detection of NMR of nuclei oriented at low temperatures is reported. The magnetic moments of the single valence particle, intermediate mass, isotopes $^{67}$Ni($\

  2. On-line crack prognosis in attachment lug using Lamb wave-deterministic resampling particle filter-based method

    Science.gov (United States)

    Yuan, Shenfang; Chen, Jian; Yang, Weibo; Qiu, Lei

    2017-08-01

    Fatigue crack growth prognosis is important for prolonging service time, improving safety, and reducing maintenance cost in many safety-critical systems, such as in aircraft, wind turbines, bridges, and nuclear plants. Combining fatigue crack growth models with the particle filter (PF) method has proved promising to deal with the uncertainties during fatigue crack growth and reach a more accurate prognosis. However, research on prognosis methods integrating on-line crack monitoring with the PF method is still lacking, as well as experimental verifications. Besides, the PF methods adopted so far are almost all sequential importance resampling-based PFs, which usually encounter sample impoverishment problems, and hence performs poorly. To solve these problems, in this paper, the piezoelectric transducers (PZTs)-based active Lamb wave method is adopted for on-line crack monitoring. The deterministic resampling PF (DRPF) is proposed to be used in fatigue crack growth prognosis, which can overcome the sample impoverishment problem. The proposed method is verified through fatigue tests of attachment lugs, which are a kind of important joint component in aerospace systems.

  3. ON-LINE SCHEDULING OF UNIT TIME JOBS WITH REJECTION ON UNIFORM MACHINES

    Institute of Scientific and Technical Information of China (English)

    Shoupeng LIU; Yuzhong ZHANG

    2008-01-01

    The authors consider the problem of on-line scheduling of unit execution time jobs on uniform machines with rejection penalty. The jobs arrive one by one and can be either accepted and scheduled, or be rejected. The objective is to minimize the total completion time of the accepted jobs and the total penalty of the rejection jobs. The authors propose an on-line algorithm and prove that the competitive ratio is 1/2 (2 + ) ≈ 1.86602.

  4. The Study on On-line Scheduling Algorithm of Imprecise Computation under Transient Overload

    Institute of Scientific and Technical Information of China (English)

    WEIZhenhua; HONGBingrong; QIAOYongqiang; CAIZesu; PENGJunjie

    2003-01-01

    Transient overload always occurs in realtime computer system. An on-line scheduling algorithm of imprecise computation is proposed in this paper to deal with it. This algorithm can be sure of getting acceptable computation result under the condition of overload, and at the same time it can improve the computation precision as much as possible. The system model of imprecise computation and the on-line imprecise computation algorithm are elaborated. And the algorithm is proved correct by simulation.

  5. On line high dose static position monitoring by ionization chamber detector for industrial gamma irradiators.

    Science.gov (United States)

    Rodrigues, Ary A; Vieira, Jose M; Hamada, Margarida M

    2010-01-01

    A 1 cm(3) cylindrical ionization chamber was developed to measure high doses on line during the sample irradiation in static position, in a (60)Co industrial plant. The developed ionization chamber showed to be suitable for use as a dosimeter on line. A good linearity of the detector was found between the dose and the accumulated charge, independently of the different dose rates caused by absorbing materials.

  6. On-line marketing - princip aukce mění svět reklamy.

    OpenAIRE

    Jankovič, Zdeněk

    2009-01-01

    Diploma thesis 'On-line marketing - Principle of an auction changes the world of advertising' is about internet as a medium, on-line commercial communications, search engines and performance marketing. This thesis is divided into three parts. First part is about internet as a medium and actual situation on the Czech internet market. Second part describes a marketing communication mix on the internet, forms of online advertisement and pros and cons of online advertising. Third part deals with ...

  7. Preferred Methods of Learning for Nursing Students in an On-Line Degree Program.

    Science.gov (United States)

    Hampton, Debra; Pearce, Patricia F; Moser, Debra K

    Investigators have demonstrated that on-line courses result in effective learning outcomes, but limited information has been published related to preferred teaching strategies. Delivery of on-line courses requires various teaching methods to facilitate interaction between students, content, and technology. The purposes of this study were to understand student teaching/learning preferences in on-line courses to include (a) differences in preferred teaching/learning methods for on-line nursing students across generations and (b) which teaching strategies students found to be most engaging and effective. Participants were recruited from 2 accredited, private school nursing programs (N=944) that admit students from across the United States and deliver courses on-line. Participants provided implied consent, and 217 (23%) students completed the on-line survey. Thirty-two percent of the students were from the Baby Boomer generation (1946-1964), 48% from Generation X (1965-1980), and 20% from the Millennial Generation (born after 1980). The preferred teaching/learning methods for students were videos or narrated PowerPoint presentations, followed by synchronous Adobe Connect educations sessions, assigned journal article reading, and e-mail dialog with the instructor. The top 2 methods identified by participants as the most energizing/engaging and most effective for learning were videos or narrated PowerPoint presentations and case studies. The teaching/learning method least preferred by participants and that was the least energizing/engaging was group collaborative projects with other students; the method that was the least effective for learning was wikis. Baby Boomers and Generation X participants had a significantly greater preference for discussion board (Plearning (Pteaching/learning methods for on-line students. Faculty need to incorporate various teaching methodologies within on-line courses to include both synchronous and asynchronous activities and interactive and

  8. On line high dose static position monitoring by ionization chamber detector for industrial gamma irradiators

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Ary A. [Universidade Estadual de Londrina-Depto de Fisica, Rodovia Celso Garcia Cid, km 38, 086051-990 Londrina (Brazil); Vieira, Jose M. [Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN-SP, Prof. Lineu Prestes, 2242-Cidade Universitaria, 05508-900 Sao Paulo (Brazil); Hamada, Margarida M. [Instituto de Pesquisas Energeticas e Nucleares-IPEN/CNEN-SP, Prof. Lineu Prestes, 2242-Cidade Universitaria, 05508-900 Sao Paulo (Brazil)], E-mail: mmhamada@ipen.br

    2010-04-15

    A 1 cm{sup 3} cylindrical ionization chamber was developed to measure high doses on line during the sample irradiation in static position, in a {sup 60}Co industrial plant. The developed ionization chamber showed to be suitable for use as a dosimeter on line. A good linearity of the detector was found between the dose and the accumulated charge, independently of the different dose rates caused by absorbing materials.

  9. On-line Identification of the DC motor Parameters by using Least Mean Square Recursive Method

    Directory of Open Access Journals (Sweden)

    Marian Gaiceanu

    2014-09-01

    Full Text Available The on-line least square parameters (electrical and mechanical identification method of the separately DC motor is presented in this paper. The parameters of the DC machine are time dependent; therefore, for the DC drive control the on-line parameters identification procedure is mandatory. By knowing accurately the DC motor parameters, the parameters of the DC speed and current cascade controllers can be obtained.

  10. On-Line Wavelength Calibration of Pulsed Laser for CO2 Differential Absorption LIDAR

    Science.gov (United States)

    Xiang, Chengzhi; Ma, Xin; Han, Ge; Liang, Ailin; Gong, Wei

    2016-06-01

    Differential absorption lidar (DIAL) remote sensing is a promising technology for atmospheric CO2 detection. However, stringent wavelength accuracy and stability are required in DIAL system. Accurate on-line wavelength calibration is a crucial procedure for retrieving atmospheric CO2 concentration using the DIAL, particularly when pulsed lasers are adopted in the system. Large fluctuations in the intensities of a pulsed laser pose a great challenge for accurate on-line wavelength calibration. In this paper, a wavelength calibration strategy based on multi-wavelength scanning (MWS) was proposed for accurate on-line wavelength calibration of a pulsed laser for CO2 detection. The MWS conducted segmented sampling across the CO2 absorption line with appropriate number of points and range of widths by using a tunable laser. Complete absorption line of CO2 can be obtained through a curve fitting. Then, the on-line wavelength can be easily found at the peak of the absorption line. Furthermore, another algorithm called the energy matching was introduced in the MWS to eliminate the backlash error of tunable lasers during the process of on-line wavelength calibration. Finally, a series of tests was conducted to elevate the calibration precision of MWS. Analysis of tests demonstrated that the MWS proposed in this paper could calibrate the on-line wavelength of pulsed laser accurately and steadily.

  11. SkyMouse: A smart interface for astronomical on-line resources and services

    Institute of Scientific and Technical Information of China (English)

    CUI ChenZhou; SUN HuaPing; ZHAO YongHeng; LUO Yu; QI DaZhi

    2008-01-01

    With the development of network and the World Wide Web (WWW), the Internet has been growing and changing dramatically. More and more on-line database systems and different kinds of services are available for astronomy research. How to help users find their way through the jungle of information services becomes an important challenge. Although astronomers have been aware of the importance of interoperability and introduced the concept of Virtual Observatory as a uniform environment for future astronomical on-line resources and services, transparent access to heterogeneous on-line information is still difficult. SkyMouse is a lightweight interface for distributed astronomical on-line resources and services, which is designed and developed by us, i.e., Chinese Virtual Observatory project. Taking ad-vantage of screen word-capturing technology, different kinds of information systems can be queried through simple mouse actions, and results are returned in a uniform web page. SkyMouse is an easy to use application, aiming to show basic information or to create a comprehensive overview of a specific astronomical object. In this paper current status of on-line resources and services access is reviewed; system architecture, features and functions of SkyMouse are described; challenges for intelligent in-terface for on-line astronomical resources and services are discussed.

  12. PROFILES AND PREFERENCES OF ON-LINE MILLENIAL SHOPPERS IN BULGARIA

    Directory of Open Access Journals (Sweden)

    Patricia R. Loubeau

    2014-05-01

    Full Text Available This research seeks to develop a better understanding of the factors affecting on-line purchasing behavior among Generation Y (Gen Y consumers in Bulgaria. Also called millenials and born between the mid-1970s and late 1990s, this generation is especially active on-line and will be a dominant influence shaping e-commerce. An empirical study was conducted based on a written survey of a sample consisting of 367 high school and university students in Bulgaria. The most important reason why Bulgarian young people shop on-line is the pursuit of unique products not locally available, followed by convenience and better pricing, and their favorite category of internet purchases is “Apparel and Accessories.” Bulgarian millennials are using the internet to shop for trendy fashion and to obtain a variety of brands that are unavailable locally. Like other regions of the world, concern about financial transactions security is a major barrier limiting the willingness to shop on-line in Bulgaria. Unlike other markets where on-line music purchases are growing, high levels of digital piracy in Bulgaria strongly discourage Bulgarian students from purchasing music on-line. One limitation of this study arises because of its reliance on a convenience sample of students from medium sized cities in Southern Bulgaria. Further research employing stratified random sampling across Bulgaria is needed to assess whether the findings are broadly generalizable for the Gen Y population.

  13. Process Analytical Technology and On-Line Spectroscopic Measurements of Chemical Meat Quality

    DEFF Research Database (Denmark)

    Sørensen, Klavs Martin

    This thesis deals with process analytical technology and how it can be implemented in the meat industry through on-line grading of chemical meat quality. The focus will be on two applications, namely the rapid quality control of fat quality and the development of a method for on-line detection of...... quality, but also with environmental issues such as energy and water use and animal welfare. Future research into the technologies will ultimately allow broad on-line screening of biomarkers, leading to on-line metabolomics......This thesis deals with process analytical technology and how it can be implemented in the meat industry through on-line grading of chemical meat quality. The focus will be on two applications, namely the rapid quality control of fat quality and the development of a method for on-line detection...... of boar taint. The chemical makeup of fat has a large effect on meat cut quality. Fat quality has traditionally been determined by methylation of a tissue sample followed by chromatography on a GC-MS system, elucidating the composition of the individual fatty acids. As this procedure typically takes far...

  14. On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model

    Energy Technology Data Exchange (ETDEWEB)

    Grell, Georg; Fast, Jerome D.; Gustafson, William I.; Peckham, Steven E.; McKeen, Stuart A.; Salzmann, Marc; Freitas, Saulo

    2010-01-01

    This is a conference proceeding that is now being put together as a book. This is chapter 2 of the book: "INTEGRATED SYSTEMS OF MESO-METEOROLOGICAL AND CHEMICAL TRANSPORT MODELS" published by Springer. The chapter title is "On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model." The original conference was the COST-728/NetFAM workshop on Integrated systems of meso-meteorological and chemical transport models, Danish Meteorological Institute, Copenhagen, May 21-23, 2007.

  15. Combination Method of Principal Component Analysis and Support Vector Machine for On-line Process Monitoring and Fault Diagnosis

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    On-line monitoring and fault diagnosis of chemical process is extremely important for operation safety and product quality. Principal component analysis (PCA) has been widely used in multivariate statistical process monitoring for its ability to reduce processes dimensions. PCA and other statistical techniques, however, have difficulties in differentiating faults correctly in complex chemical process.Support vector machine (SVM) is a novel approach based on statistical learning theory, which has emerged for feature identification and classification. In this paper, an integrated method is applied for process monitoring and fault diagnosis, which combines PCA for fault feature extraction and multiple SVMs for identification of different fault sources. This approach is verified and illustrated on the Tennessee Eastman benchmark process as a case study.Results show that the proposed PCA-SVMs method has good diagnosis capability and overall diagnosis correctness rate.

  16. An FE Based On-line Model for the Prediction of Work Roll Thermal Profile in Hot Strip Rolling

    Science.gov (United States)

    Choi, Ji Won; Lee, Jung Hyeung; Sun, Cheng Gang; Hwang, Sang Moo

    2010-06-01

    Prediction and control of the thermal deformation of the work roll is vital for enhancing product quality in hot strip and plate rolling. In this paper, we present an on-line model for the prediction of the work roll thermal profile. The model is developed on the basis of an integrated finite element model for the coupled analysis of heat transfer and deformation occurring at the bite zone, to rigorously take into account the effect of various rolling parameters on the thermal behavior of the work roll. The validity of the model is demonstrated through comparison with measurements made in an industrial hot strip mill. Also, an emphasis is given to the examination the effect of some selected rolling parameters in an actual production environment.

  17. Operational on-line coupled chemical weather forecasts for Europe with WRF/Chem

    Science.gov (United States)

    Hirtl, Marcus; Mantovani, Simone; Krüger, Bernd C.; Flandorfer, Claudia; Langer, Matthias

    2014-05-01

    Air quality is a key element for the well-being and quality of life of European citizens. Air pollution measurements and modeling tools are essential for the assessment of air quality according to EU legislation. The responsibilities of ZAMG as the national weather service of Austria include the support of the federal states and the public in questions connected to the protection of the environment in the frame of advisory and counseling services as well as expert opinions. ZAMG conducts daily Air-Quality forecasts using the on-line coupled model WRF/Chem. Meteorology is simulated simultaneously with the emissions, turbulent mixing, transport, transformation, and fate of trace gases and aerosols. The emphasis of the application is on predicting pollutants over Austria. Two domains are used for the simulations: the mother domain covers Europe with a resolution of 12 km, the inner domain includes the alpine region with a horizontal resolution of 4 km; 45 model levels are used in the vertical direction. The model runs 2 times per day for a period of 72 hours and is initialized with ECMWF forecasts. On-line coupled models allow considering two-way interactions between different atmospheric processes including chemistry (both gases and aerosols), clouds, radiation, boundary layer, emissions, meteorology and climate. In the operational set-up direct-, indirect and semi-direct effects between meteorology and air chemistry are enabled. The model is running on the HPCF (High Performance Computing Facility) of the ZAMG. In the current set-up 1248 CPUs are used. As the simulations need a big amount of computing resources, a method to safe I/O-time was implemented. Every MPI task writes all its output into the shared memory filesystem of the compute nodes. Once the WRF/Chem integration is finished, all split NetCDF-files are merged and saved on the global file system. The merge-routine is based on parallel-NetCDF. With this method the model runs about 30% faster on the SGI

  18. Enhancing communication skills for pediatric visits through on-line training using video demonstrations

    Directory of Open Access Journals (Sweden)

    Wissow Larry

    2008-02-01

    Full Text Available Abstract Background Training in communication skills for health professionals is important, but there are substantial barriers to individual in-person training for practicing clinicians. We evaluated the feasibility and desirability of on-line training and sought suggestions for future courses. Methods Based on successful in-person curricula for communication skills and our previous on-line curricula, we created an on-line course consisting of 28 modules (4.75 hours CME credit about communication skills during pediatric visits that included a mental health concern; each module included a brief case, a multiple choice question, an explanation, and a 1–2 minute video demonstrating key skills. Specific communication skills included: greeting, setting an agenda, discussing diagnosis and treatment, and managing negative interactions. The course was announced by emails in spring, 2007; the course was available on-line for 60 days; we aimed to enroll 50 clinicians. Outcomes were analyzed for those who evaluated the course within 75 days of its initial availability. Results Overall, 61 clinicians registered, of whom most were nurses (N = 24, physicians (N = 22, or psychologists or social workers (N = 12. Of the 36 (59% clinicians who evaluated the course, over 85% agreed that all course objectives had been met; over 90% reported greater confidence in greetings and agenda-setting; and over 80% reported greater confidence in discussing diagnosis and treatment and managing negative interactions. Nearly all, 97% would recommend the course to other clinicians and trainees. Suggestions for improvement included a library of additional video vignettes and written materials to accompany the on-line training. Conclusion On-line training in communication skills for pediatric mental health visits is feasible, desirable and associated with increased confidence in key skills. Positive feedback from clinicians suggests that a comparison of on-line versus in

  19. On-Line Retrieval System Design; Part V of Scientific Report No. ISR-18, Information Storage and Retrieval...

    Science.gov (United States)

    Cornell Univ., Ithaca, NY. Dept. of Computer Science.

    On-line retrieval system design is discussed in the two papers which make up Part Five of this report on Salton's Magical Automatic Retriever of Texts (SMART) project report. The first paper: "A Prototype On-Line Document Retrieval System" by D. Williamson and R. Williamson outlines a design for a SMART on-line document retrieval system…

  20. Research of on-line monitoring method for insulation condition of power transformer bushing

    Science.gov (United States)

    Xia, Jiuyun; Qian, Zheng; Yu, Hao; Yao, Junda

    2016-01-01

    The power transformer is the key equipment of the power system; its insulation condition will directly influence the security and reliability of the power system. Thus, the on-line monitoring of power transformer is urgently required in order to guarantee the normal operation of the power system. Moreover, the dielectric loss factor is a significant parameter reflecting the condition of transformer bushing, so the on-line measurement of dielectric loss factor is really important. In this paper, the phase-to-phase comparison method is selected as the on-line monitoring method based on the overall analysis and discussion of the existing on-line monitoring methods. At first, the harmonic analysis method is utilized to calculate the dielectric loss of each phase of the three-phase transformer bushing, and then the differences of dielectric loss between every two phases are calculated and analyzed. So the insulation condition of each bushing could be achieved based on the careful analysis of different phase-to-phase dielectric loss. The simulation results of phase-to-phase comparison method are carried out in this paper, and the validity is verified. At last, this method is utilized in an actual equipment of on-line monitoring.

  1. Comportamento do Consumidor On-line: a perspectiva da teoria do fluxoOn-line Consumer Behavior: the flow theory perspectiveComportamiento del consumidor On-line: la perspectiva de la teoría del flujo

    Directory of Open Access Journals (Sweden)

    FARIAS, Salomão Alencar de

    2008-03-01

    Full Text Available RESUMOEste artigo investiga o comportamento do consumidor on-line com base no fluxo, definido como a sensação holística que as pessoas sentem quando agem com total envolvimento em uma atividade (CSIKSZENTMIHALYI, 1975. Emprega-se essa teoria para melhor compreender o comportamento de compra pela Internet, embora seja um conceito ainda confuso na literatura do comportamento do consumidor, pois que não existe um consenso a respeito de quais os fatores antecedem, caracterizam ou são conseqüências do estado de fluxo. Desse modo, esta pesquisa buscou identificar os construtos, relacionados ao estado de fluxo, que devem fazer parte de um esquema de comportamento de compra on-line, além de indicar qual a sua aplicabilidade para o alcance da satisfação do consumidor na compra pela rede. Para tanto, foi utilizada uma metodologia de caráter descritivo com aplicação de um survey junto a uma amostra de 237 consumidores do varejo eletrônico. Os dados coletados foram analisados por meio de técnicas estatísticas multivariadas. Os resultados indicaram que o ambiente on-line e a telepresença antecedem o fluxo que, por sua vez, está associado ao comportamento exploratório, efeito positivo do processo de navegação, compra e satisfação com o processo de compra.ABSTRACTThis article investigates the on-line consumer behavior based on the flow theory, defined as the holistic sensation that people feel when acting with total involvement in an activity (CSIKSZENTMIHALYI, 1975. This theory has been used for better understanding the purchase behavior through the Internet, although this concept is still not sufficiently clear in consumer behavior literature, since it does not exist a consensus regarding which factors that precede, characterize or are consequences of the flow state. Thus, the present research was aimed at identifying the constructs related to the flow state that must be part of an on-line purchase behavior framework, indicating which

  2. On-Line Life Monitoring Technique for Tube Bundles of Boiler High-Temperature Heating Surface

    Institute of Scientific and Technical Information of China (English)

    Yang Dong; Wang Zhongyuan

    2005-01-01

    High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and economic operation of boiler. An on-line life monitoring model of high-temperature heating surface was set up according to the well-known L-M formula of the creep damages. The tube wall metal temperature and working stress was measured by on-line monitoring, and with this model, the real-time calculation of the life expenditure of the heating surface tube bundles were realized. Based on the technique the on-line life monitoring and management system of high-temperature heating surface was developed for a 300 MW utility boiler. An effective device was thus suggested for the implementation of the safe operation and the condition-based maintenance of utility boilers.

  3. On-line Shopping on B2C Markets in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Pilík Michal

    2012-12-01

    Full Text Available The paper deals with the e-commerce theory and is aimed primarily at its usage in business-toconsumer markets. On-line purchasing management is increasing not only in the Czech Republic but also in Europe and all over the world. The customers who think rationally use on-line shopping because of money saving, speed delivery and the possibility of product comparison. This paper presents the results of a project financed by the Czech Science Foundation P403/11/ P175: The factors influencing customers’ on-line behaviour in e-commerce environment on B2C and B2B markets in the Czech Republic. 89 % of respondents use e-shops for buying products in the Czech Republic. 32 % of them use the Internet for regular purchases and 57 % of them irregularly. 11 % of respondents have not used e-shops yet.

  4. On-line detecting of transformer winding deformation based on parameter identification of leakage inductance

    Institute of Scientific and Technical Information of China (English)

    Hao Zhiguo; Zhang Baohui; Li Peng

    2007-01-01

    Transformers are required to demonstrate the ability to withstand short circuit currents. Over currents caused by short circuit can give rise to windings deformation. In this paper, a novel method is proposed to monitor the state of transformer windings, which is achieved through on-line detecting the leakage inductance of the windings. Specifically, the mathematical model is established for on-line identifying the leakage inductance of the windings by applying least square algorithm (LSA) to the equivalent circuit equations. The effect of measurement and model inaccuracy on the identification error is analyzed, and the corrected model is also given to decrease these adverse effect on the results. Finally, dynamic test is carried out to verify our method. The test results clearly show that our method is very accurate even under the fluctuation of load or power factor. Therefore, our method can be effectively used to on-line detect the windings deformation.

  5. Administering Spatial and Cognitive Instruments In-class and On-line: Are These Equivalent?

    Science.gov (United States)

    Williamson, Kenneth C.; Williamson, Vickie M.; Hinze, Scott R.

    2017-02-01

    Standardized, well-established paper-and-pencil tests, which measure spatial abilities or which measure reasoning abilities, have long been found to be predictive of success in the STEM (science, technology, engineering, and mathematics) fields. Instructors can use these tests for prediction of success and to inform instruction. A comparative administration of spatial visualization and cognitive reasoning tests, between in-class (proctored paper and pencil) and on-line (unproctored Internet) ( N = 457), was used to investigate and to determine whether the differing instrument formats yielded equal measures of spatial ability and reasoning ability in large first-semester general chemistry sections. Although some gender differences were found, findings suggest that some differences across administration formats, but that on-line administration had similar properties of predicting chemistry performance as the in-class version. Therefore, on-line administration is a viable option for instructors to consider especially when dealing with large classes.

  6. Research on the Influence of Perceived Risk in Consumer On-line Purchasing Decision

    Science.gov (United States)

    Hong, Zhao; Yi, Li

    Perceived risk is an important factor that affects consumer's on-line shopping purchasing decision, through the perceived theories the consumer can know clearly which step owns higher risk in the whole shopping process, then learn how to prevent it, this process also strengthen the consumer confidence, thus lowering to know that the risk adjudicate to the feeling, so the essay has important and realistic meaning for further expand the electronic commerce. At first, investigate, collect, tidy up, analyze the questionnaire information, and thus get the primary data. Finally try to find out the influence of perceived risk to each stage of purchasing decision during consumer on-line shopping process with data and personal analytical. The paper is a complement to the local and existing perceived theories. The result of the study manifests that, the order of main perceived risks which felt by consumer during on-line shopping process are as follow: financial risk, the performance risk and service risk.

  7. Process Analytical Technology and On-Line Spectroscopic Measurements of Chemical Meat Quality

    DEFF Research Database (Denmark)

    Sørensen, Klavs Martin

    This thesis deals with process analytical technology and how it can be implemented in the meat industry through on-line grading of chemical meat quality. The focus will be on two applications, namely the rapid quality control of fat quality and the development of a method for on-line detection...... of boar taint. The chemical makeup of fat has a large effect on meat cut quality. Fat quality has traditionally been determined by methylation of a tissue sample followed by chromatography on a GC-MS system, elucidating the composition of the individual fatty acids. As this procedure typically takes far...... on surgical castration will be in effect starting 2018. With the ban, the risk of meat products with the malodorous taint reaching the consumer is highly increased, and thus, detection of boar taint is a necessity. No current on-line detection system is available; the only alternative is chemical extraction...

  8. Force-reflecting teleoperation of robots based on on-line correction of a virtual model

    Institute of Scientific and Technical Information of China (English)

    LIU Wei; SONG Aiguo; LI Huijun

    2007-01-01

    Virtual reality is an effective method to eliminate the influence of time delay.However,it depends on the precision of the virtual model.In this paper,we introduce a method that corrects the virtual model on-line to establish a more precise model.The geometric errors of the virtual model were corrected on-line by overlapping the graphics over the images and also by syncretizing the position and force information from the remote.Then the sliding average least squares (SALS)method was adopted to determine the mass,damp,and stiffness of the remote environment and use this information to amend the dynamic model of the environment.Experimental results demonstrate that the on-line correction method we proposed can effectively reduce the impact caused by time delay,and improve the operational performance of the teleoperation system.

  9. Administering Spatial and Cognitive Instruments In-class and On-line: Are These Equivalent?

    Science.gov (United States)

    Williamson, Kenneth C.; Williamson, Vickie M.; Hinze, Scott R.

    2016-08-01

    Standardized, well-established paper-and-pencil tests, which measure spatial abilities or which measure reasoning abilities, have long been found to be predictive of success in the STEM (science, technology, engineering, and mathematics) fields. Instructors can use these tests for prediction of success and to inform instruction. A comparative administration of spatial visualization and cognitive reasoning tests, between in-class (proctored paper and pencil) and on-line (unproctored Internet) (N = 457), was used to investigate and to determine whether the differing instrument formats yielded equal measures of spatial ability and reasoning ability in large first-semester general chemistry sections. Although some gender differences were found, findings suggest that some differences across administration formats, but that on-line administration had similar properties of predicting chemistry performance as the in-class version. Therefore, on-line administration is a viable option for instructors to consider especially when dealing with large classes.

  10. On-Line Fast Motor Fault Diagnostics Based on Fuzzy Neural Networks

    Institute of Scientific and Technical Information of China (English)

    DONG Mingchui; CHEANG Takson; CHAN Sileong

    2009-01-01

    An on-line method was developed to improve diagnostic accuracy and speed for analyzing run-ning motors on site. On-line pre-measured data was used as the basis for constructing the membership functions used in a fuzzy neural network (FNN) as well as for network training to reduce the effects of vari-ous static factors, such as unbalanced input power and asymmetrical motor alignment, to increase accuracy.The preprocessed data and fuzzy logic were used to find the nonlinear mapping relationships between the data and the conclusions. The FNN was then constructed to carry motor fault diagnostics, which gives fast accurate diagnostics. The on-line fast motor fault diagnostics clearly indicate the fault type, location, and severity in running motors. This approach can also be extended to other applications.

  11. PF-OLA: A High-Performance Framework for Parallel On-Line Aggregation

    CERN Document Server

    Qin, Chengjie

    2012-01-01

    On-line aggregation provides estimates to the final result of a computation during the actual processing. The user can stop the computation as soon as the estimate is accurate enough, typically early in the execution. This allows for the interactive data exploration of the largest datasets. In this paper we introduce the first framework for parallel on-line aggregation in which the estimation does not incur any overhead on top of the actual execution. We define a generic interface to express any estimation model that abstracts completely the execution details. We design a novel estimator specifically targeted at parallel on- line aggregation. When executed by the framework over an 8TB TPC-H instance, the estimator provides accurate confidence bounds early in the execution even when the cardinality of the final result is seven orders of magnitude smaller than the dataset size and without incurring any overhead.

  12. Treatment of hepatic encephalopathy by on-line hemodiafiltration: a case series study

    Directory of Open Access Journals (Sweden)

    Sugiyama Mitsugi

    2010-05-01

    Full Text Available Abstract Background It is thought that a good survival rate of patients with acute liver failure can be achieved by establishing an artificial liver support system that reliably compensates liver function until the liver regenerates or a patient undergoes transplantation. We introduced a new artificial liver support system, on-line hemodiafiltration, in patients with acute liver failure. Methods This case series study was conducted from May 2001 to October 2008 at the medical intensive care unit of a tertiary care academic medical center. Seventeen consecutive patients who admitted to our hospital presenting with acute liver failure were treated with artificial liver support including daily on-line hemodiafiltration and plasma exchange. Results After 4.9 ± 0.7 (mean ± SD on-line hemodiafiltration sessions, 16 of 17 (94.1% patients completely recovered from hepatic encephalopathy and maintained consciousness for 16.4 ± 3.4 (7-55 days until discontinuation of artificial liver support (a total of 14.4 ± 2.6 [6-47] on-line hemodiafiltration sessions. Significant correlation was observed between the degree of encephalopathy and number of sessions of on-line HDF required for recovery of consciousness. Of the 16 patients who recovered consciousness, 7 fully recovered and returned to society with no cognitive sequelae, 3 died of complications of acute liver failure except brain edema, and the remaining 6 were candidates for liver transplantation; 2 of them received living-related liver transplantation but 4 died without transplantation after discontinuation of therapy. Conclusions On-line hemodiafiltration was effective in patients with acute liver failure, and consciousness was maintained for the duration of artificial liver support, even in those in whom it was considered that hepatic function was completely abolished.

  13. PROFILES AND PREFERENCES OF ON-LINE MILLENIAL SHOPPERS IN BULGARIA

    OpenAIRE

    Loubeau, Patricia R.; Robert Jantzen; Elitsa Alexander

    2014-01-01

    This research seeks to develop a better understanding of the factors affecting on-line purchasing behavior among Generation Y (Gen Y) consumers in Bulgaria. Also called millenials and born between the mid-1970s and late 1990s, this generation is especially active on-line and will be a dominant influence shaping e-commerce. An empirical study was conducted based on a written survey of a sample consisting of 367 high school and university students in Bulgaria. The most important reason why Bulg...

  14. On-line monitoring of fermentation processes using multi-wavelength fluorescence

    DEFF Research Database (Denmark)

    Odman, Peter; Petersen, Nanna; Johansen, Claus Lindvald

    2007-01-01

    Fermentation processes often suffer from a lack of real-time methods for on-line determination of variables like the concentrations of nutrients and products. This work aims at investigating the possibilities of implementing an on-line fermentation monitoring system based on multi....... The model system considered in this work is the antibiotic production by Streptomyces coelicolor, a filamentous bacterium. In addition to predicting concentrations of biomass in the fermentation broth, the data allowed detection of different physiological states, i.e. growth phase and phosphate limitation...

  15. On-line Supervised Adaptive Training Using Radial Basis Function Networks.

    Science.gov (United States)

    Luo, Wan; Billings, Steve A.; Fung, Chi F.

    1996-12-01

    A new recursive supervised training algorithm is derived for the radial basis neural network architecture. The new algorithm combines the procedures of on-line candidate regressor selection with the conventional Givens QR based recursive parameter estimator to provide efficient adaptive supervised network training. A new concise on-line correlation based performance monitoring scheme is also introduced as an auxiliary device to detect structural changes in temporal data processing applications. Practical and simulated examples are included to demonstrate the effectiveness of the new procedures. Copyright 1996 Elsevier Science Ltd.

  16. The design and implementation of on-line monitoring system for UHV compact shunt capacitors

    Science.gov (United States)

    Tao, Weiliang; Ni, Xuefeng; Lin, Hao; Jiang, Shengbao

    2017-08-01

    Because of the large capacity and compact structure of the UHV compact shunt capacitor, it is difficult to take effective measures to detect and prevent the faults. If the fault capacitor fails to take timely maintenance, it will pose a threat to the safe operation of the system and the life safety of the maintenance personnel. The development of UHV compact shunt capacitor on-line monitoring system can detect and record the on-line operation information of UHV compact shunt capacitors, analyze and evaluate the early fault warning signs, find out the fault capacitor or the capacitor with fault symptom, to ensure safe and reliable operation of the system.

  17. On-line Monitoring of Epoxy Resin Exposed to Acid Solution

    Institute of Scientific and Technical Information of China (English)

    Yuyan LIU; M.Kubouchi; H.Sembokuya; K.Tsuda; T.Tomiyama

    2006-01-01

    In this study, a new on-line health monitoring technology for the determination of the penetration of environment solution into epoxy resin was pursued. A corrosion sensor including plastic optical fiber and pH indicator was fabricated. The color-change layer of this sensor appeared after immersion in sulfuric acid solution, which could be examined by using optical fiber and spectrophotometer. The results showed that the penetration of sulfuric acid was detected by adding bromophenol blue (BPB) in the corrosion sensor. This system could be applied to on-line health monitoring of chemical equipment structures.

  18. The financial crisis impact on the Romanian on-line advertising

    Directory of Open Access Journals (Sweden)

    Duguleană, L.

    2010-12-01

    Full Text Available The last trimester of 2008 brought a 4.4% GDP decrease for the Romanian economy. Due to the new financial constraints, Romanian companies started to look for ways to manage and promote their product efficiently. The World Wide Web became the place where products were relocated and on-line advertising proved to be a cheaper and faster way to access customers. This paper aims to analyze the dynamics of the Romanian web, the new challenges for site owners and the opportunities of today’s on-line marketing.

  19. Active load sharing technique for on-line efficiency optimization in DC microgrids

    DEFF Research Database (Denmark)

    Sanseverino, E. Riva; Zizzo, G.; Boscaino, V.

    2017-01-01

    , is created to store the real efficiencies of the converters taking into account components tolerances. A MATLAB/Simulink model of the DC distribution network has been set up and a Genetic Algorithm has been employed for the global efficiency optimization. Simulation results are shown to validate the proposed......-DC converters, is modeled. An active load sharing technique is proposed for the on-line optimization of the global efficiency of the DC distribution network. The algorithm aims at the instantaneous efficiency optimization of the whole DC network, based on the on-line load current sampling. A Look Up Table...

  20. Process Identification in On-line Optimizing Control, an Application to a Heat Pump

    Directory of Open Access Journals (Sweden)

    Morten C. Svensson

    1996-10-01

    Full Text Available The objective of this paper is to focus on on-line state and parameter estimation in connection with on-line model-based optimizing control of continuous processes. A nonlinear programming approach is used to estimate unmeasured state variables and parameters in systems modelled by nonlinear differential-algebraic equations. The nonlinear dynamic model is discretized by orthogonal collocation on finite elements, and the moving-horizon approach is used to reduce the dimension of the final optimization problem.

  1. On-line identification of hybrid systems using an adaptive growing and pruning RBF neural network

    DEFF Research Database (Denmark)

    Alizadeh, Tohid

    2008-01-01

    This paper introduces an adaptive growing and pruning radial basis function (GAP-RBF) neural network for on-line identification of hybrid systems. The main idea is to identify a global nonlinear model that can predict the continuous outputs of hybrid systems. In the proposed approach, GAP......-RBF neural network uses a modified unscented kalman filter (UKF) with forgetting factor scheme as the required on-line learning algorithm. The effectiveness of the resulting identification approach is tested and evaluated on a simulated benchmark hybrid system....

  2. Note: On-line weak signal detection via adaptive stochastic resonance.

    Science.gov (United States)

    Lu, Siliang; He, Qingbo; Kong, Fanrang

    2014-06-01

    We design an instrument with a novel embedded adaptive stochastic resonance (SR) algorithm that consists of a SR module and a digital zero crossing detection module for on-line weak signal detection in digital signal processing applications. The two modules are responsible for noise filtering and adaptive parameter configuration, respectively. The on-line weak signal detection can be stably achieved in seconds. The prototype instrument exhibits an advance of 20 dB averaged signal-to-noise ratio and 5 times averaged adjust R-square as compared to the input noisy signal, in considering different driving frequencies and noise levels.

  3. On-line Professional Learning Communities: Increasing Teacher Learning and Productivity in Isolated Rural Communities

    Directory of Open Access Journals (Sweden)

    Dora Salazar

    2010-08-01

    Full Text Available On-line and distance professional learning communities provides teachers with increased access and flexibility as well as the combination of work and education. It also provides a more learner-centered approach, enrichment and new ways of interacting with teachers in isolated rural areas. For educational administrators, on-line learning offers high quality and usually cost-effective professional development for teachers. It allows upgrading of skills, increased productivity and development of a new learning culture. At the same time, it means sharing of costs, of training time, increased portability of training, and the exchange of creativity, information, and dialogue.

  4. ON-LINE STATE PREDICTION OF ENGINES BASED ON FLAT NEURAL NETWORK

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A flat neural network is designed for the on-line state prediction of engine. To reduce the computational cost of weight matrix, a fast recursive algorithm is derived according to the pseudoinverse formula of a partition matrix. Furthermore, the forgetting factor approach is introduced to improve predictive accuracy and robustness of the model. The experiment results indicate that the improved neural network is of good accuracy and strong robustness in prediction, and can apply for the on-line prediction of nonlinear multi input multi output systems like vehicle engines.

  5. On-line Peer Review in Teaching Design-oriented Courses

    Directory of Open Access Journals (Sweden)

    Hai Ning

    2004-02-01

    Full Text Available Peer review has been one of the very important designfacilitating processes practiced in education field, particularly in design-oriented courses such as MIT's 2.007 Robot Design. Typically students exchange ideas sketched on a piece of paper and critique on each other's design within a small team. We designed PREP web application backed up by a range of web services that handle the peer-review process on-line, and we argue that this is a significant step towards supporting designoriented course on-line. We believe that the lessons learned could be applied to other interested institutes that offer designoriented courses.

  6. 排序问题Pm,ai|on-line|Cmax的LPT算法%LPT Algorithm for Scheduling Problem Pm,ai|on-line|Cmax

    Institute of Scientific and Technical Information of China (English)

    赵传立; 唐恒永

    2000-01-01

    In this paper we discuss the on-line parallel processors scheduling problem where tasks arrive over time. Chen and Vestjens proved that the bound of LPT is 3/2. We generalize the result to the case where the processors have ready time.%讨论了任务实时到达的平行机在线排序问题。Chen和Vestjens证明了LPT算法的界为3/2。将这一结论推广到了处理机具有准备时间的情况。

  7. On-line identification, flutter testing and adaptive notching of structural parameters for V-22 tiltrotor aircraft

    Indian Academy of Sciences (India)

    R K Mehra; P O Arambel; A M Sampath; R K Prasanth; T C Parham

    2000-04-01

    New algorithms and results are presented for flutter testing and adaptive notching of structural modes in V-22 tiltrotor aircraft based on simulated and flight-test data from Bell Helicopter Textron, Inc. (BHTI). For flutter testing and the identification of structural mode frequencies, dampings and mode shapes, time domain state space techniques based on Deterministic Stochastic Realization Algorithms (DSRA) are used to accurately identify multiple modessimultaneously from sine sweep and other multifrequency data, resulting in great savings over the conventional Prony method. Two different techniques for adaptive notching are explored in order to design an Integrated Flight Structural Control (IFSC) system. The first technique is based on on-line identification of structural mode parameters using DSRA algorithm and tuning of a notch filter. The second technique is based on decoupling rigid-body and structural modes of the aircraft by means of a Kalman filter and using rigid-body estimates in the feedback control loop. The difference between the two approaches is that on-line identification and adaptive notching in the first approach are entirely based on the knowledge of structural modes, whereas the Kalman filter design in the second approach is based on the rigid-body dynamic model only.In the first IFSC design, on-line identification is necessary for flight envelope expansion and to adjust the notch filter frequencies and suppress aero-servoelastic instabilities due to changing flight conditionssuch as gross weight, sling loads, and airspeed. It isshown that by tuning the notch filterfrequency to the identified frequency, the phase lag is reduced and the corresponding structural mode is effectively suppressed and stability is maintained. In the second IFSC design using Kalman filter design, the structural modes are again effectively suppressed. Furthermore, the rigid-body estimates are found to be fairly insensitive to both natural frequency and damping factor

  8. First results of the INSIDE in-beam PET scanner for the on-line monitoring of particle therapy treatments

    Science.gov (United States)

    Piliero, M. A.; Belcari, N.; Bisogni, M. G.; Camarlinghi, N.; Cerello, P.; Coli, S.; Del Guerra, A.; Ferrero, V.; Fiorina, E.; Giraudo, G.; Kostara, E.; Morrocchi, M.; Pennazio, F.; Peroni, C.; Pirrone, G.; Rivetti, A.; Rolo, M. D.; Rosso, V.; Sportelli, G.; Wheadon, R.

    2016-12-01

    Quality assessment of particle therapy treatments by means of PET systems has been carried out since late `90 and it is one of the most promising in-vivo non invasive monitoring techniques employed clinically. It can be performed with a diagnostic PET scanners installed outside the treatment room (off-line monitoring) or inside the treatment room (in-room monitoring). However the most efficient way is by integrating a PET scanner with the treatment delivery system (on-line monitoring) so that the biological wash out and the patient repositioning errors are minimized. In this work we present the performance of the in-beam PET scanner developed within the INSIDE project. The INSIDE PET scanner is made of two planar heads, 10 cm wide (transaxially) and 25 cm long (axially), composed of pixellated LFS crystals coupled to Hamamatsu MPPCs. Custom designed Front-End Electronics (FE) and Data AcQuisition (DAQ) systems allow an on-line reconstruction of PET images from separated in-spill and inter-spill data sets. The INSIDE PET scanner has been recently delivered at the CNAO (Pavia, Italy) hadrontherapy facility and the first experimental measurements have been carried out. Homogeneous PMMA phantoms and PMMA phantoms with small air and bone inserts were irradiated with monoenergetic clinical proton beams. The activity range was evaluated at various benchmark positions within the field of view to assess the homogeneity of response of the PET system. Repeated irradiations of PMMA phantoms with clinical spread out Bragg peak proton beams were performed to evaluate the reproducibility of the PET signal. The results found in this work show that the response of the INSIDE PET scanner is independent of the position within the radiation field. Results also show the capability of the INSIDE PET scanner to distinguish variations of the activity range due to small tissue inhomogeneities. Finally, the reproducibility of the activity range measurement was within 1 mm.

  9. On-line measurement of N{sub 2}O in flue gas; Die On-line-Messung von N{sub 2}O in Verbrennungsgasen

    Energy Technology Data Exchange (ETDEWEB)

    Eisenberger, H.J. [TUEV-Ecoplan Umwelt-GmbH, Muenchen (Germany); Fabinski, W.; Hielscher, B.; Zoechbauer, M. [Hartmann und Braun GmbH und Co. KG, Frankfurt am Main (Germany)

    1998-06-01

    Conventional on-line measurement of Nitrous Oxide (N{sub 2}O) in flue gases mainly is limited by the cross sensitivities of the used measurement technique and unwanted reactions in the sample conditioning system. Based on this state of engeneering, a simple method with a usual NDIR-analyzer and sample conditioning with the new coolertechnique is discribed. The measurement set-up has been installed in a waste incineration plant. The results of the investigations are being presented in this paper. (orig.) [Deutsch] Die Grenzen der herkoemmlichen On-line-Messtechnik von Distickstoffmonoxid (N{sub 2}O) in Rauchgasen sind massgeblich durch Querempfindlichkeiten der Messverfahren und unerwuenschte Nachreaktionen in der Probenaufbereitung bestimmt. Ausgehend von diesem Stand der Technik wird eine einfache Methode der N{sub 2}O-Messung mit einem handelsueblichen NDIR-Analysator und einer Probenaufbereitung mit einer neuen Kuehlertechnik beschrieben. Zwei Messaufbauten mit dieser neuen Technik wurden an einer Muellverbrennungsanlage installiert. Ueber die Untersuchungen dazu wird hier berichtet. (orig.)

  10. Natural gas large volumes measurement: going for on-line custody transfer; Medicao de grandes volumes de gas natural: rumo a transferencia de custodia on-line

    Energy Technology Data Exchange (ETDEWEB)

    Mercon, Eduardo G.; Frisoli, Caetano [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This paper describes the structure of the natural gas flow measurement process in TRANSPETRO, and comments features and performance of existing or under-implantation equipment and systems, reviewing best practices and technology in use. This process runs through three interrelated segments: data flow measurement, strictly speaking; data transfer and acquisition; and data flow measurement certification (data consolidation to invoice). Initially, the work makes an approach to the data flow measurement segment, evaluating technical features of flow meters, and describing configurations and functions of the operating gas flow computers in TRANSPETRO's custody transfer stations. In this part it will also be presented the implantation of TRANSPETRO's system for gas chromatography data input on-line to flow computers. Further, in data transfer and acquisition, SCADA system technical aspects will be evaluated, considering communications protocols and programmable logic controllers functions in remote terminal units, and discussing their places in the measurement process. Additionally, TRANSPETRO's experience in data measurement certification tools is in discussion, as well as new upcoming tools and their potential features, from what new practices will be suggested. Finally, all the work has been conceived and carried out always aiming to the state-of-the-art technology in gas flow measurement: on-line custody transfer. (author)

  11. On-Line Sentence Processing in Swedish: Cross-Linguistic Developmental Comparisons with French

    Science.gov (United States)

    Kail, Michele; Kihlstedt, Maria; Bonnet, Philippe

    2012-01-01

    This study examined on-line processing of Swedish sentences in a grammaticality-judgement experiment within the framework of the Competition Model. Three age groups from 6 to 11 and an adult group were asked to detect grammatical violations as quickly as possible. Three factors concerning cue cost were studied: violation position (early vs. late),…

  12. On-Line Processing of Tense and Temporality in Agrammatic Aphasia

    Science.gov (United States)

    Faroqi-Shah, Yasmeen; Dickey, Michael Walsh

    2009-01-01

    Agrammatic aphasic individuals exhibit marked production deficits for tense morphology. This paper presents three experiments examining whether a group of English-speaking agrammatic individuals (n = 10) exhibit parallel deficits in their comprehension of tense. Results from two comprehension experiments (on-line grammaticality judgment studies)…

  13. Multifunctional ultrasonic sensor for on-line tool condition monitoring in turning operations

    Energy Technology Data Exchange (ETDEWEB)

    Nayfeh, T.H.; Abu-Zahra, N.H. [Cleveland State Univ., OH (United States). Industrial Engineering Dept.

    1998-03-01

    Machining operations in automated manufacturing centers are, in general, under-performing by 20--80 percent. Optimizing these machining operations requires on-line knowledge of the cutting tool`s condition and the process state. Currently, this information is either not reliable or not available in a timely manner. This in part is due to the lack of suitable sensors which are able to measure on-line directly and accurately one or more of the relevant tool and process variables. A direct, active, ultrasonic method for on-line sensing of the tool condition and the process state in turning operations was developed in this work. Sensing is achieved by using an ultrasonic transducer operating at 10 MHz in a pulse-echo mode to send pulses through the cutting tool. The amplitude and propagation time of the reflected pulses are modulated by the tool nose, flank, temperature, and by the material in contact with the tools. This method has the potential to measure on-line several relevant process and cutting tool parameters directly and accurately through the use of a single sensor. These parameters are tool-workpiece contact, tool gradual wear, tool chipping and tool chatter.

  14. On-Line Hyperspectral Transmittance Imaging for Internal Defect Detection of Pickling Cucumbers

    Science.gov (United States)

    Hyperspectral imaging technique under transmittance mode was investigated for detection of internal defect in pickling cucumbers such as carpel suture separation or hollow cucumbers caused by mechanical stress. A prototype of on-line hyperspectral transmittance imaging system was developed for real...

  15. An on-line automated sleep-wake classification system for laboratory animals

    NARCIS (Netherlands)

    Witting, W; vanderWerf, D; Mirmiran, M

    1996-01-01

    A computerized sleep-wake classification program is presented that is capable of classifying sleep-wake states on-line in four animals simultaneously. Every 10 s the classification algorithm assigns sleep-wake states on the basis of the power spectrum of an EEG signal and the standard deviation of a

  16. Lower bounds for 1-, 2- and 3-dimensional on-line bin packing algorithms

    NARCIS (Netherlands)

    G. Galambos; A. van Vliet (André)

    1994-01-01

    textabstractIn this paper we discuss lower bounds for the asymptotic worst case ratio of on-line algorithms for different kind of bin packing problems. Recently, Galambos and Frenk gave a simple proof of the 1.536 ... lower bound for the 1-dimensional bin packing problem. Following their ideas, we p

  17. A new on-line leakage current monitoring system of ZnO surge arresters

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Bok-Hee [Research Center for Next-Generation High Voltage and Power Technology, Inha University, 253 Yonghyun-dong, Nam-ku, Incheon 402-751 (Korea, Republic of)]. E-mail: bhlee@inha.ac.kr; Kang, Sung-Man [Research Center for Next-Generation High Voltage and Power Technology, Inha University, 253 Yonghyun-dong, Nam-ku, Incheon 402-751 (Korea, Republic of)

    2005-05-15

    This paper presents a new on-line leakage current monitoring system of zinc oxide (ZnO) surge arresters. To effectively diagnose the deterioration of ZnO surge arresters, a new algorithm and on-line leakage current detection device, which uses the time-delay addition method, for discriminating the resistive and capacitive currents was developed to use in the aging test and durability evaluation for ZnO arrester blocks. A computer-based measurement system of the resistive leakage current, the on-line monitoring device can detect accurately the leakage currents flowing through ZnO surge arresters for power frequency ac applied voltages. The proposed on-line leakage current monitoring device of ZnO surge arresters is more highly sensitive and gives more linear response than the existing devices using the detection method of the third harmonic leakage currents. Therefore, the proposed leakage current monitoring device can be useful for predicting the defects and performance deterioration of ZnO surge arresters in power system applications.

  18. On-line determination of the calorific value of solid fuels

    NARCIS (Netherlands)

    Kessel, L.B.M. van; Arendsen, A.R.J.; Brem, G.

    2004-01-01

    In thermal processes with highly inhomogeneous fuels it is desirable to know real time fuel characteristics. In the case of municipal solid waste combustion (MSWC) it was up till now not possible to determine the calorific value of the waste on-line with a high accuracy. In this paper, a new method

  19. Competence based learning for an on-line course on flood modelling for management

    NARCIS (Netherlands)

    Popescu, Ioanna; Jonoski, Andreja; Keuls, Carel

    2009-01-01

    Popescu, I., Jonoski, A., & Keuls, C. (2009). Competence based learning for an on-line course on flood modelling for management. Proceedings of the 33rd International Association of Hydraulic Engineering & Research (IAHR Congress). August, 9-14, 2009, Vancouver, Canada: TENCompetence.

  20. On-line competence based learning in hydroinformatics, at UNESCO-IHE

    NARCIS (Netherlands)

    Popescu, Ioanna; Jonoski, Andreja; Bhattacharya, Biswa; Keuls, Carel

    2009-01-01

    Popescu, I., Jonoski, A., Bhattacharya, B., & Keuls, C. (2009). On-line competence based learning in hydroinformatics, at UNESCO-IHE. Proceedings of the 8th International Conference on Hydroinformatics-HIC 2009. January, 12-16, 2009, Conceptión, Chile: TENCompetence.

  1. A Quantized State Approach to On-line Simulation for Spacecraft Autonomy

    DEFF Research Database (Denmark)

    Alminde, Lars; Stoustrup, Jakob; Bendtsen, Jan Dimon

    2006-01-01

    Future space applications will require an increased level of operational autonomy. This calls for declarative methods for spacecraft state estimation and control, so that the spacecraft engineer can focus on modeling the spacecraft rather than implementing all details of the on-line system...

  2. Multilevel participation within on-line collections of local memories as a practice of cultural citizenship

    NARCIS (Netherlands)

    Kreek, de Mike

    2011-01-01

    Collecting local memories on-line is a growing practice with participatory elements on different levels. Three levels of participation – micro, meso and macro – are introduced by describing an exemplary case: the Memory of East in Amsterdam. These levels of this particular case can be grounded in th

  3. A Phenomenological Study of Gifted Adolescents and Their Engagement with One On-Line Learning System

    Science.gov (United States)

    Swicord, Barbara

    2010-01-01

    Little research exists on the nature of the interactions between gifted students and the use of technology. Furthermore, no research has investigated the phenomenon of gifted adolescents using one internet-based program, the Renzulli Learning System (RLS). Renzulli Learning is an on-line educational profile with a matching database that provides…

  4. Práctica de fundamentos de probabilidad apoyada en recursos on line

    OpenAIRE

    Arnaldos García, Fuensanta; Faura Martínez, Úrsula

    2011-01-01

    Propuesta de práctica de los fundamentos de la probabilidad apoyada en recursos on line basada en el trabajo presentado en las III Jornadas de Docencia en Economía (Cartagena, junio 2011). Ejercicios prácticos

  5. Proceedings of the 6th Computer Science On-line Conference 2017

    CERN Document Server

    Senkerik, Roman; Oplatkova, Zuzana; Prokopova, Zdenka; Silhavy, Petr

    2017-01-01

    This book presents new methods and approaches to real-world problems as well as exploratory research that describes novel artificial intelligence applications, including deep learning, neural networks and hybrid algorithms. This book constitutes the refereed proceedings of the Artificial Intelligence Trends in Intelligent Systems Section of the 6th Computer Science On-line Conference 2017 (CSOC 2017), held in April 2017. .

  6. CERN HR receives award for on-line recruitment and communication

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    In a survey of 21,000 European students, CERN ranked 15th, ahead of giants like Microsoft and Nestlé, for the quality of its on-line "talent communication", that is how it uses the Internet to attract job applicants. HR now boasts a new virtual award, certifying its on-line savvy.   The "virtual" award given to HR. How did you get your job at CERN? Via the CERN HR website, or Facebook, or Twitter? Or were you headhunted on LinkedIn? Particularly if you’re from the younger generation, chances are that you used some form of on-line recruitment. In this case you will have used one of the best recruitment tools in Europe, according to the 2012 OTaC (Online Talent Communication) study, carried out by a research institute named Potentialpark. It surveyed over 21,000 students, asking them to rate employers’ use of seven different channels of communication about jobs and careers, from HR websites and on-line application systems to the...

  7. Marketing the Library in an On-Line University to Help Achieve Information Literacy

    Science.gov (United States)

    Murphy, Jennifer

    2013-01-01

    An entrepreneurial librarian takes the embedded librarian concept one step further at a completely on-line university and markets the virtual library to students, faculty and administration rather than wait for customers to come to the library. York and Vance (2009) make the observation that "one obstacle to marketing an embedded librarian…

  8. ON LINE COMPUTATION OF EMPIRICAL FORMULA BY MEANS OF ELEMENTAL ANALYSIS AND ITS PROGRAM DESIGN

    Institute of Scientific and Technical Information of China (English)

    钱朴; 胡培荣; 金正成

    1995-01-01

    On line determination of empirical formula for organic compounds with an automatic elemental analyzer and its program design method were investigated. The computational results shews that the reliability of computational results depends on the accuracy of the analytical data and the organic compound itself.

  9. Extending Practical Pre-Aggregation in On-Line Analytical Processing

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Jensen, Christian Søndergaard; Dyreson, Curtis E.

    On-Line Analytical Processing (OLAP) based on a dimensional view of data is being used increasingly in traditional business applications as well as in applications such as health care for the purpose of analyzing very large amounts of data. Pre-aggregation, the prior materialization of aggregate...

  10. On-line parameter, state-of-charge and aging estimation of Li-ion batteries

    NARCIS (Netherlands)

    Rosca, B.; Kessels, J.T.B.A.; Bergveld, H.J.; Bosch, P.P.J. van den

    2012-01-01

    This paper presents an on-line model identification method for Li-ion battery parameters that combines high accuracy and low computational complexity. Experimental results show that modeling errors are smaller than 1% throughout the feasible operating range. The identified model is used in a state

  11. Evidence for priming across intervening sentences during on-line sentence comprehension

    NARCIS (Netherlands)

    Tooley, K.M.; Swaab, T.Y.; Boudewyn, M.A.; Zirnstein, M.; Traxler, M.J.

    2014-01-01

    Three experiments investigated factors contributing to syntactic priming during on-line comprehension. In all of the experiments, a prime sentence containing a reduced relative clause was presented prior to a target sentence that contained the same structure. Previous studies have shown that people

  12. On-Line Real Time Realization and Application of Adaptive Fuzzy Inference Neural Network

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper,a modeling algorithm developed by transferring the adaptive fuzzy inference neural network into an on-line real time algorithm,combining the algorithm with conventional system identification method and applying them to separate identification of nonlinear mu Iti-variable systems is introduced and discussed.

  13. Using an On-Line Tool To Investigate Chemical Engineering Seniors' Concept of the Design Process.

    Science.gov (United States)

    Streveler, Ruth A.; Miller, Ronald L.; Boyd, Thomas M.

    In this study, multidimensional scaling (MDS) was used to measure how 23 chemical engineering seniors categorized key design terms at the beginning and end of a capstone design course. An on-line method was developed to collect the MDS data. The results suggest that some important design concepts were not well understood, even at the end of the…

  14. Assessment of corrosion in the flue gas cleaning system using on-line monitoring

    DEFF Research Database (Denmark)

    Montgomery, Melanie; Vendelbo Nielsen, Lars; Berggreen Petersen, Michael

    2015-01-01

    products/deposits were detected. An on-line corrosion measurement system was established to determine corrosion mechanisms. It was revealed that many shutdowns/start-ups of the plant influence corrosion and result in decreased lifetime of components and increased maintenance. The change of fuel from...

  15. First Responder Weapons of Mass Destruction Training Using Massively Multiplayer On-Line Gaming

    Science.gov (United States)

    2004-06-01

    Washington, DC. 1997. p. 16. 150 Kimery, Anthony. p. 24. 151 _____, “$7.7 Million Expansion for TEEX Training Complex.” Texas Engineering... TEEX Training Complex.” Texas Engineering Extension Service. 26 October 1999. Texas. Database available on line at http://teexweb.tamu.edu

  16. Engaging Students On-Line:Does Gender Matter in Adoption of Learning Material Design?

    Directory of Open Access Journals (Sweden)

    Norziani Dahalan

    2013-12-01

    Full Text Available Education is reforming with the birth of the internet. Learning is not solely based on classroom basis but also through on-line. The revolution of Internet has transformed teaching via face-to-face into virtual teaching. The expansion of teaching deliveries suggests that we need interactive mechanism to accommodate course material for on-line students. However, creating on-line materials requires the conception of on-line instructional design. A suitable online material design will allow learners to engage with learning. Learners will have opportunities to develop their own understanding. In addition, suitable learning material will strengthen learner’s knowledge construction from their short-term memory to long-term memory. The purpose of this paper is to discover the learning material design approach based on gender by evaluating lecturer’s adoption of online material design using Keller’s ARCS model. The sample consisting of 30 lecturers from distance education learning reveals that gender differs in their adoption of learning material design specifically on getting attention of the student. The result also shows that relevance and satisfaction contribute to gender differences in learning material adoption. Limitations of the study and practical implications of these findings discussed.

  17. Comparing the Hierarchy of Keywords in On-Line News Portals

    Science.gov (United States)

    Tibély, Gergely; Sousa-Rodrigues, David; Pollner, Péter; Palla, Gergely

    2016-01-01

    Hierarchical organization is prevalent in networks representing a wide range of systems in nature and society. An important example is given by the tag hierarchies extracted from large on-line data repositories such as scientific publication archives, file sharing portals, blogs, on-line news portals, etc. The tagging of the stored objects with informative keywords in such repositories has become very common, and in most cases the tags on a given item are free words chosen by the authors independently. Therefore, the relations among keywords appearing in an on-line data repository are unknown in general. However, in most cases the topics and concepts described by these keywords are forming a latent hierarchy, with the more general topics and categories at the top, and more specialized ones at the bottom. There are several algorithms available for deducing this hierarchy from the statistical features of the keywords. In the present work we apply a recent, co-occurrence-based tag hierarchy extraction method to sets of keywords obtained from four different on-line news portals. The resulting hierarchies show substantial differences not just in the topics rendered as important (being at the top of the hierarchy) or of less interest (categorized low in the hierarchy), but also in the underlying network structure. This reveals discrepancies between the plausible keyword association frameworks in the studied news portals. PMID:27802319

  18. Application for the On-line Isotope Mass Separator ISOLDE Facility: the Target Heater

    CERN Document Server

    Sánchez-Conejo, Jorge

    2003-01-01

    The purpose of the Heater Application is to heat and cool the target and line used on the On-Line Isotope Mass Separator ISOLDE facility up to a desired temperature selected by the user. The application has been developed in Java, making use of the Java Development Kit 1.4 and the PS Java environment.

  19. Application for the On-line Isotope Mass Separator ISOLDE Facility: the Mass Scan

    CERN Document Server

    Sánchez-Conejo, Jorge

    2003-01-01

    The purpose of the Mass Scan Application is to scan the mass of the ion beam that passes through the GPS (General Purpose Separator) on the On-Line Isotope Mass Separator ISOLDE facility. The application has been developed in Java, making use of the Java Development Kit 1.4 and the PS Java environment.

  20. An on-line high performance liquid chromatography-crocin bleaching assay for detection of antioxidants

    NARCIS (Netherlands)

    Bountagkidou, O.; Klift, van der E.J.C.; Tsimidou, M.Z.; Ordoudi, S.A.; Beek, van T.A.

    2012-01-01

    An on-line HPLC (high performance liquid chromatography) method for the rapid screening of individual antioxidants in mixtures was developed using crocin as a substrate (i.e. oxidation probe) and 2,2'-azobis(2-amidinopropane dihydrochloride (AAPH)) in phosphate buffer (pH 7.5) as a radical generator

  1. 76 FR 52731 - On-Line Complaint Form for Service-Related Issues in Air Transportation

    Science.gov (United States)

    2011-08-23

    ... Office of the Secretary On-Line Complaint Form for Service-Related Issues in Air Transportation AGENCY... is complaining, flight date, flight number, and origin and destination cities of complainant's trip...- travel related information from the ACPD. The Department has limited its informational request to...

  2. SkyMouse: A smart interface for astronomical on-line resources and services

    CERN Document Server

    CUI, Chen-Zhou; ZHAO, Yong-Heng; LUO, Yu; QI, Da-Zhi

    2007-01-01

    With the development of network and the World Wide Web (WWW), the Internet has been growing and changing dramatically. More and more on-line database systems and different kinds of services are available for astronomy research. How to help users find their way through the jungle of information services becomes an important challenge. Although astronomers have been aware of the importance of interoperability and introduced the concept of Virtual Observatory as a uniform environment for future astronomical on-line resources and services, transparent access to heterogeneous on-line information is still difficult. SkyMouse is a lightweight interface for distributed astronomical on-line resources and services, which is designed and developed by us, i.e., Chinese Virtual Observatory Project. Taking advantage of screen word-capturing technology, different kinds of information systems can be queried through simple mouse actions, and results are returned in a uniform web page. SkyMouse is an easy to use application, a...

  3. Determination of Peroxide-Based Explosives Using Liquid Chromatography with On-Line Infrared Detection

    NARCIS (Netherlands)

    Schulte-Ladbeck, Rasmus; Edelmann, Andrea; Quintas, Guillermo; Lendl, Bernhard; Karst, U.

    2006-01-01

    A nondestructive analytical method for peroxide-based explosives determination in solid samples is described. Reversed-phase high-performance liquid chromatography in combination with on-line Fourier transform infrared (FT-IR) detection is used for the analysis of triacetonetriperoxide (TATP) and

  4. Learning Consciousness and Teaching Conception in On-line English Learning

    Institute of Scientific and Technical Information of China (English)

    LiYanglong

    2004-01-01

    With the Teaching Requirement of College English Courses issued by the Ministry of Education, another round of college English teaching reform has been set in motion, which starts all the English teachers, language teaching researchers,education administrators and the on-line teaching-learning material desimaers to consider thoroughly a series of new topics

  5. The derivation of on-line algorithms, with an application to finding palindromes

    NARCIS (Netherlands)

    Jeuring, J.T.

    1994-01-01

    A theory for the derivation of on-line algorithms is presented. The algorithms are derived in the Bird-Meertens calculus for program transformations. This calculus provides a concise functional notation for algorithms, and a few powerful theorems for proving equalities of functions. The

  6. On-Line Dependability Enhancement of Multiprocessor SoCs by Resource Management

    NARCIS (Netherlands)

    Braak, ter T.D.; Burgess, S.T.; Hurskainen, H.; Kerkhoff, H.G.; Vermeulen, B.; Zhang, Xiao

    2010-01-01

    This paper describes a new approach towards dependable design of homogeneous multi-processor SoCs in an example satellite-navigation application. First, the NoC dependability is functionally verified via embedded software. Then the Xentium processor tiles are periodically verified via on-line self-t

  7. Model for on-line moisture-content control during solid-state fermentation

    NARCIS (Netherlands)

    Nagel, F.J.J.I.; Tramper, J.; Bakker, M.S.N.; Rinzema, A.

    2001-01-01

    In this study we describe a model that estimates the extracellular (nonfungal) and overall water contents of wheat grains during solid-state fermentation (SSF) with Aspergillus oryzae, using on-line measurements of oxygen, carbon dioxide, and water vapor in the gas phase. The model uses elemental ba

  8. The S-Star Trial Bioinformatics Course: An On-line Learning Success

    Science.gov (United States)

    Lim, Yun Ping; Hoog, Jan-Olov; Gardner, Phyllis; Ranganathan, Shoba; Andersson, Siv; Subbiah, Subramanian; Tan, Tin Wee; Hide, Winston; Weiss, Anthony S.

    2003-01-01

    The S-Star Trial Bioinformatics on-line course (www.s-star.org) is a global experiment in bioinformatics distance education. Six universities from five continents have participated in this project. One hundred and fifty students participated in the first trial course of which 96 followed through the entire course and 70 fulfilled the overall…

  9. Optimization of antibody immobilization for on-line or off-line immunoaffinity chromatography

    DEFF Research Database (Denmark)

    Beyer, Natascha Helena; Schou, Christian; Højrup, Peter

    2009-01-01

    . A systematic study was conducted to determine the most versatile antibody immobilization method for use in on-line and off-line IA chromatography applications using commonly accessible immobilization methods. Four chemistries were examined using polyclonal and monoclonal antibodies and antibody fragments. We...

  10. Development of the Defense Documentation Center Remote On-Line Retrieval System - Past, Present and Future.

    Science.gov (United States)

    Bennertz, Richard K.

    The document highlights in nontechnical language the development of the Defense Documentation Center (DDC) Remote On-Line Retrieval System from its inception in 1967 to what is planned. It describes in detail the current operating system, equipment configuration and associated costs, user training and system evaluation and may be of value to other…

  11. On the use of on-line detection for maintenance of gradually deteriorating systems

    Energy Technology Data Exchange (ETDEWEB)

    Fouladirad, Mitra [Institut Charles Delaunay, Universite de Technologie de Troyes, FRE CNRS 2848, LM2S 12 rue Marie Curie, 10010 Troyes (France); Grall, Antoine [Institut Charles Delaunay, Universite de Technologie de Troyes, FRE CNRS 2848, LM2S 12 rue Marie Curie, 10010 Troyes (France)], E-mail: antoine.grall@utt.fr; Dieulle, Laurence [Institut Charles Delaunay, Universite de Technologie de Troyes, FRE CNRS 2848, LM2S 12 rue Marie Curie, 10010 Troyes (France)

    2008-12-15

    This paper deals with condition-based maintenance and non-stationary degradation process due to sudden changes. This is an attempt to propose an adaptive maintenance policy based on the on-line change detection procedure which can help to detect switches from a nominal mode to an accelerated mode in a non-informative context about the change mode time.

  12. Study Progress of On-line Monitoring Device for Uranium and Plutonium by XRF

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    An X-ray fluorescence spectrometer was designed and set up, which was used to determine uranium and plutonium on-line in reprocessing process stream. Uranium in aqueous and organic phase, plutonium in aqueous were measured by using the device,

  13. A P2P approach to resource discovery in on-line monitoring of Grid workflows

    NARCIS (Netherlands)

    Łabno, B.; Bubak, M.; Baliś, B.

    2008-01-01

    On-line monitoring of Grid workflows is challenging since workflows are loosely coupled and highly dynamic. An efficient mechanism of automatic resource discovery is needed in order to discover new producers of workflow monitoring data fast. However, currently used Grid information systems are not s

  14. Modern on-line control system for refuse-fueled power plants. Moderne Leittechnik fuer Muellverbrennungsanlage

    Energy Technology Data Exchange (ETDEWEB)

    Grasmueck, L. (Asea Brown Boveri AG, Mannheim (Germany, F.R.)); Klitzke, H.J. (Goepfert und Reimer und Partner, Beratende Ingenieure, Hamburg (Germany, F.R.)); Schumacher, E. (Technische Werke Ludwigshafen am Rhein AG (Germany, F.R.))

    1989-10-01

    30 years after commissioning a refuse-fueled power plant in Ludwigshafen was retrofitted and extended. A process control system provides an optimal waste combustion and flue gas cleanup. An on-line central strategy, special requirements on waste combustion and solutions are presented in this report. (orig.).

  15. Institutional Perspectives for on-line learning: Policy and Return-on-Investment

    NARCIS (Netherlands)

    Moonen, J.C.M.M.

    2001-01-01

    In this article an analysis will be presented about why, at the institutional level and in particular at the university level, on-line learning is being introduced. This will be done in the context of a general design approach to steer innovation in education. Costs and financial-benefit issues will

  16. Electrochemical oxidation and cleavage of peptides analyzed with on-line mass spectrometric detection

    NARCIS (Netherlands)

    Permentier, H.P.; Jurva, U; Barroso, B.; Bruins, A.P.

    2003-01-01

    An on-line electrochernistry/electrospray mass spectrometry system (EC/MS) is described that allows fast analysis of the oxidation products of peptides. A range of peptides was oxidized in an electrochemical cell by application of a potential ramp from 0 to 1.5 V during passage of the sample. Electr

  17. Efficient On-line Schemes for Encoding Individual Sequences with Side Information at the Decoder

    CERN Document Server

    Reani, Avraham

    2009-01-01

    We present adaptive on-line schemes for lossy encoding of individual sequences under the conditions of the Wyner-Ziv (WZ) problem. In the first part of this article, a set of fixed-rate scalar source codes with zero delay is presented. We propose a randomized on-line coding scheme, which achieves asymptotically (and with high probability), the performance of the best source code in the set, uniformly over all source sequences. The scheme uses the same rate and has zero delay. We then present an efficient algorithm for implementing our on-line coding scheme in the case of a relatively small set of encoders. We also present an efficient algorithm for the case of a larger set of encoders with a structure, using the method of the weighted graph and the Weight Pushing Algorithm (WPA). In the second part of this article, we extend our results to the case of variable-rate coding. A set of variable-rate scalar source codes is presented. We generalize the randomized on-line coding scheme, to our case. This time, the p...

  18. Antioxidants in Raspberry: On-line analysis links antioxidant activity to a diversity of individual metabolites

    NARCIS (Netherlands)

    Beekwilder, M.J.; Jonker, H.H.; Hall, R.D.; Meer, van der I.M.; Vos, de C.H.

    2005-01-01

    The presence of antioxidant compounds can be considered as a quality parameter for edible fruit. In this paper, we studied the antioxidant compounds in raspberry (Rubus idaeus) fruits by high-performance liquid chromatography (HPLC) coupled to an on-line postcolumn antioxidant detection system. Both

  19. The On-Line Yes/No Test as a Placement Tool

    Science.gov (United States)

    Harrington, Michael; Carey, Michael

    2009-01-01

    This study evaluates the concurrent validity of an on-line Yes/No test of recognition vocabulary as a placement tool at an Australian English language school. Newly entering students (n = 88) completed a Yes/No test, which measured accuracy and speed of response, and a school placement battery consisting of grammar, writing, speaking and listening…

  20. Research of PD on-line Monitoring System for DC Cable

    Directory of Open Access Journals (Sweden)

    Duan Da-Peng

    2014-01-01

    Full Text Available In order to monitor the insulation of XLPE cable of rail system, an On-line Partial Discharge (PD Monitoring System applied for 1500V DC cables of Shanghai Traction Substation is described, including its hardware and software structure. After installed, this system successfully detected one PD signal. The results demonstrated that this system worked stably and reliably.

  1. On-line Versus Face-to-Face Education: Utilizing Technology to Increase Effectiveness

    Science.gov (United States)

    2012-05-17

    Company, 2001. Gould , Jay W., III. "Program Planning of Asynchronous On-Line Courses: Design Complexities and Ethics." Acquisition Review Quarterly...Vanessa, Juanita Johnson-Bailey,Scipio A.J. Colin, Elizabeth Peterson, and Stephen D. Brookfield. The Handbook of Race and Adult Education. San Francisco

  2. English Collocation Learning through Corpus Data: On-Line Concordance and Statistical Information

    Science.gov (United States)

    Ohtake, Hiroshi; Fujita, Nobuyuki; Kawamoto, Takeshi; Morren, Brian; Ugawa, Yoshihiro; Kaneko, Shuji

    2012-01-01

    We developed an English Collocations On Demand system offering on-line corpus and concordance information to help Japanese researchers acquire a better command of English collocation patterns. The Life Science Dictionary Corpus consists of approximately 90,000,000 words collected from life science related research papers published in academic…

  3. Determination of Peroxide-Based Explosives Using Liquid Chromatography with On-Line Infrared Detection

    NARCIS (Netherlands)

    Schulte-Ladbeck, Rasmus; Edelmann, Andrea; Quintas, Guillermo; Lendl, Bernhard; Karst, Uwe

    2006-01-01

    A nondestructive analytical method for peroxide-based explosives determination in solid samples is described. Reversed-phase high-performance liquid chromatography in combination with on-line Fourier transform infrared (FT-IR) detection is used for the analysis of triacetonetriperoxide (TATP) and he

  4. Comparing the Hierarchy of Keywords in On-Line News Portals.

    Science.gov (United States)

    Tibély, Gergely; Sousa-Rodrigues, David; Pollner, Péter; Palla, Gergely

    2016-01-01

    Hierarchical organization is prevalent in networks representing a wide range of systems in nature and society. An important example is given by the tag hierarchies extracted from large on-line data repositories such as scientific publication archives, file sharing portals, blogs, on-line news portals, etc. The tagging of the stored objects with informative keywords in such repositories has become very common, and in most cases the tags on a given item are free words chosen by the authors independently. Therefore, the relations among keywords appearing in an on-line data repository are unknown in general. However, in most cases the topics and concepts described by these keywords are forming a latent hierarchy, with the more general topics and categories at the top, and more specialized ones at the bottom. There are several algorithms available for deducing this hierarchy from the statistical features of the keywords. In the present work we apply a recent, co-occurrence-based tag hierarchy extraction method to sets of keywords obtained from four different on-line news portals. The resulting hierarchies show substantial differences not just in the topics rendered as important (being at the top of the hierarchy) or of less interest (categorized low in the hierarchy), but also in the underlying network structure. This reveals discrepancies between the plausible keyword association frameworks in the studied news portals.

  5. Comparison and Contrast of Paper-based and On-line Dictionaries

    Institute of Scientific and Technical Information of China (English)

    王雪

    2014-01-01

    This paper explores the advantages and disadvantages of paper printed and on-line dictionaries in terms of macrostruc-ture and microstructure, availability, portability and practicality etc. Different kinds of dictionaries have unique features that can-not be fully replaced by other kinds.

  6. On-line blind source separation algorithm based on second order statistics

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    An on-line blind source separation (BSS) algorithm is presented in this paper under the assumption that sources are temporarily correlated signals. By using only some of the observed samples in a recursive calculation, the whitening matrix and the rotation matrix could be approximately obtained through the measurement of only one cost function. Simulations show good performance of the algorithm.

  7. Problem-based learning in an on-line biotechnology course

    Science.gov (United States)

    Cheaney, James Daniel

    Problem-based learning (PBL) is a pedagogical tool that uses a "real world" problem or situation as a context for learning. PBL encourages student development of critical thinking skills, a high professional competency, problem-solving ability, knowledge acquisition, the ability to work productively as a team member and make decisions in unfamiliar situations, and the acquisition of skills that support self-directed life-long learning, metacognition, and adaptation to change. However, little research has focused on the use of PBL in on-line "virtual" classes. We conducted two studies exploring the use of PBL in an on-line biotechnology course. In the first study, ethical, legal, social, and human issues were used as a motivation for learning about DNA testing technologies, applications, and bioethical issues. In the second study, we combined PBL pedagogy with a rich multimedia environment of streaming video interviews, physical artifacts, and extensive links to articles and databases to create a multidimensional immersive PBL environment called "Robert's World". In "Robert's World", a man is determining whether to undergo a pre-symptomatic DNA test for an untreatable, incurable, fatal genetic disease for which he has a family history. In both studies, design and implementation issues of the on-line PBL environment are discussed, as are differences between on-line PBL and face-to-face PBL. Both studies provide evidence to suggest that PBL stimulates higher-order learning in students. However, in both studies, student performance on an exam testing acquisition of lower-order factual learning was lower for PBL students than for students who learned the same material through a traditional lecture-based approach. Possible reasons for this lower level of performance are explored. Student feedback expressed engagement with the issues and material covered, with reservations about some aspects of the PBL format, such as the lack of flexibility provided in cooperative

  8. Generic on-line solid phase extraction sample preparation strategies for the analysis of drugs in biological matrices by LC-MS/MS.

    Science.gov (United States)

    Bourgogne, Emmanuel; Grivet, Chantal; Varesio, Emmanuel; Hopfgartner, Gérard

    2015-01-01

    In the present work we investigate the integration of a single hardware platform (Prospekt-2) allowing on-line SPE with pre-/post-trapping dilution and direct injection of plasma extracts, and also compare the benefits and challenges of the different approaches for pharmaceutical drugs with heterogeneous physicochemical properties. In the first part, the generic use of on-line SPE with direct plasma injection or after protein precipitation was investigated for the quantitative analysis of talinolol. In the second part, pre-trapping and post-trapping dilution for on-line SPE is discussed for generic method development on an oxadiazole and its major metabolite. Finally, the difference of performance between direct plasma injection vs. off-line liquid-liquid extraction is also described for the quantification of buprenorphine and naltrexone down to 50 and 100 pg/ml using a 0.25 ml plasma aliquot. All assays were in human plasma and detection was performed by mass spectrometry detection either on simple or triple stage quadrupoles. Regardless of the tested strategy, assays were found linear, with precision and accuracy with <15% for all quality controls samples and <20% for lower limit of quantitation.

  9. GEM-AQ, an on-line global multiscale chemical weather system: model description and evaluation of gas phase chemistry processes

    Directory of Open Access Journals (Sweden)

    J. W. Kaminski

    2007-10-01

    Full Text Available Tropospheric chemistry and air quality processes were implemented on-line in the Global Environmental Multiscale model. The integrated model, GEM-AQ, has been developed as a platform to investigate chemical weather at scales from global to urban. The model was exercised for five years (2001–2005 to evaluate its ability to simulate seasonal variations and regional distributions of trace gases such as ozone, nitrogen dioxide and carbon monoxide on the global scale. The model results presented are compared with observations from satellites, aircraft measurement campaigns and balloon sondes.

  10. Educação on-line em contabilidade: propensão e aspectos curriculares On-line accounting education: tendency and curriculum aspects

    Directory of Open Access Journals (Sweden)

    Edgard B. Cornachione Jr

    2007-12-01

    Full Text Available Com base na literatura envolvendo educação na área de negócios, bem como nos achados de pesquisadores da área de desenvolvimento de recursos humanos e considerando as necessidades educacionais e de treinamento no ambiente de trabalho, este estudo foca a análise da metacognição e propensão de estudantes-executivos (alunos adultos trabalhadores em participar de disciplinas oferecidas on-line relacionadas a programas de MBA com ênfase em Contabilidade e áreas afins, além de explorar quais conteúdos específicos podem estar relacionados a esse fenômeno. O crescimento da oferta de cursos on-line, considerando a flexibilidade e adaptabilidade que essa modalidade de ensino permite, reforça a importância da compreensão dos fatores que influenciam a propensão à participação. Segundo dados do Anuário Brasileiro Estatístico de EAD 2007, um em cada 80 brasileiros estudoupor EAD em 2006. Foram cerca 2.279.000 alunos a distância matriculados em vários tipos (ensino credenciado, educação corporativa e em outros projetos nacionais e regionais dentre os 889 cursos a distância (credenciados pelo Sistema de Ensino - MEC e conselhos estaduais de educação. Esses números confirmam a importância de se examinar esse tema. Foi estudada uma amostra composta de 189 alunos de pós-graduação matriculados em programas de MBA em Contabilidade, no formato presencial, oferecido por reconhecida instituição brasileira de ensino e pesquisa (a Fundação Instituto de Pesquisas Contábeis, Atuariais e Financeiras - FIPECAFI, órgão de apoio ao Departamento de Contabilidade e Atuária da FEA/USP. Além da análise estatística descritiva, estudos e testes de correlação, de comparação de médias e análise de conglomerados foram conduzidos para apoiar a discussão e resposta às questões de pesquisa aqui estabelecidas. De forma integrada, os resultados reforçam a premissa de que o conteúdo de disciplinas possui papel relevante na propens

  11. Integrated microfluidic system enabling (bio)chemical reactions with on-line MALDI-TOF mass spectrometry

    NARCIS (Netherlands)

    Brivio, Monica; Fokkens, Roel H.; Verboom, Willem; Reinhoudt, David N.; Tas, Niels R.; Goedbloed, Martijn; Berg, van den Albert

    2002-01-01

    A continuous flow micro total analysis system (μ-TAS) consisting of an on-chip microfluidic device connected to a matrix assisted laser desorption ionization [MALDI] time-of-flight [TOF] mass spectrometer (MS) as an analytical screening system is presented. Reaction microchannels and inlet/outlet re

  12. An on-line interface for integrated modeling of wildlife, climate, and society for strategic planning for the Sky Islands

    Science.gov (United States)

    Barron J. Orr; Wolfgang Grunberg; Amanda B. Cockerham; Anne Y. Thwaits; Heather S. Severson; Noah M. D. Lerman; Rachel M. Miller; Michael Haseltine; Barbara J. Morehouse; Jonathan T. Overpeck; Stephen R. Yool; Thomas W. Swetnam; Gary L. Christopherson

    2005-01-01

    The demand for strategic planning tools that account for climate and human influences on wildfire hazard is growing. In response, the University of Arizona, through an EPA STAR Grant has undertaken interdisciplinary research to characterize the human and climate dimensions of wildfire. The resulting Fire-Climate-Society (FCS-1) prototype model developed for Sky Islands...

  13. Immediate integration of different types of prosodic information during on-line spoken language comprehension: an ERP study.

    Science.gov (United States)

    Li, Xiaoqing; Chen, Yiya; Yang, Yufang

    2011-04-22

    An event-related brain potentials (ERP) experiment was carried out to investigate the role of prosodic prominence and prosodic boundary as well as their interaction in spoken discourse comprehension. Chinese question-answer dialogues were used as stimuli. The answer sentence is a syntactically ambiguous phrase, with a prosodic phrase boundary at the immediate left side of the critical word in the carrier sentence. Meanwhile, the critical word was accented. We manipulated the question context while keeping the speech signal of the answer sentence constant, which gives rise to congruent and in-congruent question-answer pairs with violations of prosodic prominence, prosodic boundary, or both. Results showed that prosodic prominence violation evoked a frontal-central negative effect (270-510ms), while prosodic boundary violation elicited a broadly distributed negative effect (270-510ms and 510-660ms). The effect of combined prominence-boundary violation was similar to that of the single prosodic prominence violation. Furthermore, there was an interaction between the effect of prosodic prominence violation and the effect of prosodic boundary violation in the window latency of 270-510ms, which suggests an immediate interaction between the semantic processing of prosodic prominence and the syntactic processing of prosodic boundary during spoken language comprehension. In addition, a detailed analysis of the obtained negativity effects showed that the size of the negative effect to the prosodic boundary violation was increased by an additional prosodic prominence violation, but the size of the negative effect to the prosodic prominence violation was not affected by an additional prosodic boundary violation, which suggests an asymmetry between the effects of prosodic prominence and prosodic boundary. Copyright © 2010 Elsevier B.V. All rights reserved.

  14. Integrated modeling of ozonation for optimization of drinking water treatment

    NARCIS (Netherlands)

    van der Helm, A.W.C.

    2007-01-01

    Drinking water treatment plants automation becomes more sophisticated, more on-line monitoring systems become available and integration of modeling environments with control systems becomes easier. This gives possibilities for model-based optimization. In operation of drinking water treatment

  15. Small unmanned helicopter's attitude controller by an on-line adaptive fuzzy control system

    Institute of Scientific and Technical Information of China (English)

    GAO Tong-yue; RAO Jin-jun; GONG Zhen-bang; LUO Jun

    2009-01-01

    Since small unmanned helicopter flight attitude control process has strong time-varying characteristics and there are random disturbances, the conventional control methods with unchanged parameters are often unworkable. An on-line adaptive fuzzy control system (AFCS) was designed, in a way that does not depend on a process model of the plant or its approximation in the form of a Jacobian matrix. Neither is it necessary to know the desired response at each instant of time. AFCS implement a simultaneous on-line tuning of fuzzy rules and output scale of fuzzy control system. The two cascade controller design with an inner (attitude controller) and outer controller (navigation controller) of the small unmanned helicopter was proposed. At last, an attitude controller based on AFCS was implemented. The flight experiment showed that the proposed fuzzy logic controller provides quicker response, smaller overshoot, higher precision, robustness and adaptive ability. It satisfies the needs of autonomous flight.

  16. On-Line Method and Apparatus for Coordinated Mobility and Manipulation of Mobile Robots

    Science.gov (United States)

    Seraji, Homayoun (Inventor)

    1996-01-01

    A simple and computationally efficient approach is disclosed for on-line coordinated control of mobile robots consisting of a manipulator arm mounted on a mobile base. The effect of base mobility on the end-effector manipulability index is discussed. The base mobility and arm manipulation degrees-of-freedom are treated equally as the joints of a kinematically redundant composite robot. The redundancy introduced by the mobile base is exploited to satisfy a set of user-defined additional tasks during the end-effector motion. A simple on-line control scheme is proposed which allows the user to assign weighting factors to individual degrees-of-mobility and degrees-of-manipulation, as well as to each task specification. The computational efficiency of the control algorithm makes it particularly suitable for real-time implementations. Four case studies are discussed in detail to demonstrate the application of the coordinated control scheme to various mobile robots.

  17. On-line adaptive line frequency noise cancellation from a nuclear power measuring channel

    Directory of Open Access Journals (Sweden)

    Qadir Javed

    2011-01-01

    Full Text Available On-line software for adaptively canceling 50 Hz line frequency noise has been designed and tested at Pakistan Research Reactor 1. Line frequency noise causes much problem in weak signals acquisition. Sometimes this noise is so dominant that original signal is totally corrupted. Although notch filter can be used for eliminating this noise, but if signal of interest is in close vicinity of 50 Hz, then original signal is also attenuated and hence overall performance is degraded. Adaptive noise removal is a technique which could be employed for removing line frequency without degrading the desired signal. In this paper line frequency noise has been eliminated on-line from a nuclear power measuring channel. The adaptive LMS algorithm has been used to cancel 50 Hz noise. The algorithm has been implemented in labVIEW with NI 6024 data acquisition card. The quality of the acquired signal has been improved much as can be seen in experimental results.

  18. On-line monitoring of pharmaceutical production processes using Hidden Markov Model.

    Science.gov (United States)

    Zhang, Hui; Jiang, Zhuangde; Pi, J Y; Xu, H K; Du, R

    2009-04-01

    This article presents a new method for on-line monitoring of pharmaceutical production process, especially the powder blending process. The new method consists of two parts: extracting features from the Near Infrared (NIR) spectroscopy signals and recognizing patterns from the features. Features are extracted from spectra by using Partial Least Squares method (PLS). The pattern recognition is done by using Hidden Markov Model (HMM). A series of experiments are conducted to evaluate the effectiveness of this new method. In the experiments, wheat powder and corn powder are blended together at a set concentration. The proposed method can effectively detect the blending uniformity (the success rate is 99.6%). In comparison to the conventional Moving Block of Standard Deviation (MBSD), the proposed method has a number of advantages, including higher reliability, higher robustness and more transparent decision making. It can be used for effective on-line monitoring of pharmaceutical production processes.

  19. A novel, optical, on-line bacteria sensor for monitoring drinking water quality.

    Science.gov (United States)

    Højris, Bo; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen; Smith, Christian; Dahlqvist, Mathis

    2016-04-04

    Today, microbial drinking water quality is monitored through either time-consuming laboratory methods or indirect on-line measurements. Results are thus either delayed or insufficient to support proactive action. A novel, optical, on-line bacteria sensor with a 10-minute time resolution has been developed. The sensor is based on 3D image recognition, and the obtained pictures are analyzed with algorithms considering 59 quantified image parameters. The sensor counts individual suspended particles and classifies them as either bacteria or abiotic particles. The technology is capable of distinguishing and quantifying bacteria and particles in pure and mixed suspensions, and the quantification correlates with total bacterial counts. Several field applications have demonstrated that the technology can monitor changes in the concentration of bacteria, and is thus well suited for rapid detection of critical conditions such as pollution events in drinking water.

  20. Good control practices underlined by an on-line fuzzy control database

    Directory of Open Access Journals (Sweden)

    Alonso, M. V.

    1994-04-01

    Full Text Available In the olive oil trade, control systems that automate extraction processes, cutting production costs and increasing processing capacity without losing quality, are always desirable. The database structure of an on-line fuzzy control of centrifugation systems and the algorithms used to attain the best control conditions are analysed. Good control practices are suggested to obtain virgin olive oil of prime quality.

    In the olive oil trade, control systems that automate extraction processes, cutting production costs and increasing processing capacity without losing quality, are always desirable. The database structure of an on-line fuzzy control of centrifugation systems and the algorithms used to attain the best control conditions are analysed. Good control practices are suggested to obtain virgin olive oil of prime quality.

  1. Development of On-Line Monitoring Systems for High Temperature Components in Power Plants

    Directory of Open Access Journals (Sweden)

    Hongcai Zhang

    2013-11-01

    Full Text Available To accurately detect deformation and extend the component life beyond the original design limits, structural safety monitoring techniques have attracted considerable attention in the power and process industries for decades. In this paper an on-line monitoring system for high temperature pipes in a power plant is developed. The extension-based sensing devices are amounted on straight pipes, T-Joints and elbows of a main steam pipeline. During on-site monitoring for more than two years, most of the sensors worked reliably and steadily. However, the direct strain gauge could not work for long periods because of the high temperature environment. Moreover, it is found that the installation and connection of the extensometers can have a significant influence on the measurement results. The on-line monitoring system has a good alarming function which is demonstrated by detecting a steam leakage of the header.

  2. Development of on-line monitoring systems for high temperature components in power plants.

    Science.gov (United States)

    Zhang, Hongcai; Jia, Jiuhong; Wang, Ning; Hu, Xiaoyin; Tu, Shan-Tung; Zhou, Shaoping; Wang, Zhengdong

    2013-11-13

    To accurately detect deformation and extend the component life beyond the original design limits, structural safety monitoring techniques have attracted considerable attention in the power and process industries for decades. In this paper an on-line monitoring system for high temperature pipes in a power plant is developed. The extension-based sensing devices are amounted on straight pipes, T-Joints and elbows of a main steam pipeline. During on-site monitoring for more than two years, most of the sensors worked reliably and steadily. However, the direct strain gauge could not work for long periods because of the high temperature environment. Moreover, it is found that the installation and connection of the extensometers can have a significant influence on the measurement results. The on-line monitoring system has a good alarming function which is demonstrated by detecting a steam leakage of the header.

  3. ON-LINE WEAR DETECTION OF MILLING TOOLS USING A DISPLACEMENT FIBER OPTIC SENSOR

    Directory of Open Access Journals (Sweden)

    E. Castillo-Castañeda

    2003-07-01

    Full Text Available A cost-effective technique for on-line wear monitoring of a milling tool is presented. The tool wear is estimateddirectly from a fiber optic sensor with high resolution and high bandwidth characteristics. This sensor providesa distance measurement between its probe and the tool profile. The contribution of this work is the applicationof this sensor to sense on-line wear of a milling tool. Since the light emitted by this sensor comes from aphotodiode, it does not produce eye damage, this is safer than laser displacement sensors. This techniquesenses the tool wear in real time, while the tool is rotating, with an accuracy less than 1 micron. Experimentalresults are also presented for a four-flank cutting tool rotating at 300 rpm.

  4. On-line analysis capabilities developed to support the AFW wind-tunnel tests

    Science.gov (United States)

    Wieseman, Carol D.; Hoadley, Sherwood T.; Mcgraw, Sandra M.

    1992-01-01

    A variety of on-line analysis tools were developed to support two Active Flexible Wing wind-tunnel tests. These tools were developed to verify control law execution, to satisfy analysis requirements of the control law designers, to provide measures of system stability in a real-time environment, and to provide project managers with a quantitative measure of controller performance. Description and purposes of capabilities which were developed are presented in this paper along with examples. Procedures for saving and transferring data for near real-time analysis, and descriptions of the corresponding data interface programs are also presented. The on-line analysis tools worked well before, during, and after the wind-tunnel tests and proved to be a vital and important part of the entire test effort.

  5. Chemical investigations of isotope separation on line target units for carbon and nitrogen beams

    CERN Document Server

    Franberg, H; Gäggeler, H W; Köster, U

    2006-01-01

    Radioactive ion beams (RIBs) are of significant interest in a number of applications. Isotope separation on line (ISOL) facilities provide RIB with high beam intensities and good beam quality. An atom that is produced within the ISOL target will first diffuse out from the target material. During the effusion towards the transfer line and into the ion source the many contacts with the surrounding surfaces may cause unacceptable delays in the transport and, hence, losses of the shorter-lived isotopes. We performed systematic chemical investigations of adsorption in a temperature and concentration regime relevant for ISOL targets and ion source units, with regard to CO/sub x/ and NOmaterials are potential construction materials for the above-mentioned areas. Off-line and on-line tests have been performed using a gas thermochromatography setup with radioactive tracers. The experiments were performed at the production of tracers for atmospheric chemistry (PROTRAC) facility at the Paul Schener Institute in Villigen...

  6. On-line ostracism affects children differently from adolescents and adults.

    Science.gov (United States)

    Abrams, Dominic; Weick, Mario; Thomas, Dominique; Colbe, Hazel; Franklin, Keith M

    2011-03-01

    This research examines adults', and for the first time, children's and adolescents' reaction to being ostracized and included, using an on-line game, 'Cyberball' with same and opposite sex players. Ostracism strongly threatened four primary needs (esteem, belonging, meaning, and control) and lowered mood among 8- to 9-year-olds, 13- to 14-year-olds, and adults. However, it did so in different ways. Ostracism threatened self-esteem needs more among 8- to 9-year-olds than older participants. Among 13- to 14-year-olds, ostracism threatened belonging more than other needs. Belonging was threatened most when ostracism was participants' first experience in the game. Moreover, when participants had been included beforehand, ostracism threatened meaning needs most strongly. Gender of other players had no effect. Practical and developmental implications for social inclusion and on-line experiences among children and young people are discussed.

  7. [Techniques of on-line monitoring volatile organic compounds in ambient air with optical spectroscopy].

    Science.gov (United States)

    Du, Zhen-Hui; Zhai, Ya-Qiong; Li, Jin-Yi; Hu, Bo

    2009-12-01

    Volatile organic compounds (VOCs) are harmful gaseous pollutants in the ambient air. The techniques of on-line monitoring VOCs are very significant for environment protection. Until now, there is no single technology that can meet all the needs of monitoring various VOCs. The characteristics and present situation of several optical methods, which can be applied to on-line monitoring VOCs, including non dispersive infrared (NDIR), Fourier transform infrared (FTIR) spectroscopy, differential optical absorption spectroscopy (DOAS), and laser spectroscopy were reviewed. Comparison was completed between the national standard methods and spectroscopic method for measuring VOCs. The main analysis was focused on the status and trends of tuning diode laser absorption spectroscopy (TDLAS) technology.

  8. Modeling a multivariable reactor and on-line model predictive control.

    Science.gov (United States)

    Yu, D W; Yu, D L

    2005-10-01

    A nonlinear first principle model is developed for a laboratory-scaled multivariable chemical reactor rig in this paper and the on-line model predictive control (MPC) is implemented to the rig. The reactor has three variables-temperature, pH, and dissolved oxygen with nonlinear dynamics-and is therefore used as a pilot system for the biochemical industry. A nonlinear discrete-time model is derived for each of the three output variables and their model parameters are estimated from the real data using an adaptive optimization method. The developed model is used in a nonlinear MPC scheme. An accurate multistep-ahead prediction is obtained for MPC, where the extended Kalman filter is used to estimate system unknown states. The on-line control is implemented and a satisfactory tracking performance is achieved. The MPC is compared with three decentralized PID controllers and the advantage of the nonlinear MPC over the PID is clearly shown.

  9. Applications of on-line weak affinity interactions in free solution capillary electrophoresis

    DEFF Research Database (Denmark)

    Heegaard, Niels H H; Nissen, Mogens H; Chen, David D Y

    2002-01-01

    The impressive selectivity offered by capillary electrophoresis can in some cases be further increased when ligands or additives that engage in weak affinity interactions with one or more of the separated analytes are added to the electrophoresis buffer. This on-line affinity capillary...... enantiomers and on using capillary electrophoresis to characterize such interactions quantitatively. We describe the equations for binding isotherms, illustrate how selectivity can be manipulated by varying the additive concentrations, and show how the methods may be used to estimate binding constants. On......-line affinity capillary electrophoresis methods are especially valuable for enantiomeric separations and for functional characterization of the contents of biological samples that are only available in minute quantities....

  10. On-Line Broken-Bar Fault Diagnosis System of Induction Motor

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rong; WANG Xiuhe

    2008-01-01

    Induction motor faults including mechanical and electrical faults are reviewed. The fault diagnosis methods are summarized. To analyze the influence of stator current, torque, speed and rotor current on faulted bars, a time-stepping transient finite element (FE) model of induction motor with bars faulted is created in this paper. With wavelet package analysis method and FFT method, the simulation result of finite element is analyzed. Based on the simulation analysis, the on-line fault diagnosis system of induction motor with bars faulted is developed. With the speed of broken bars motor changed from 1 478 r/min to 1 445 r/min, the FFT power spectra and the wavelet package decoupling factors are given. The comparison result shows that the on-line diagnosis system can detect broken-bar fault efficiently.

  11. A novel, optical, on-line bacteria sensor for monitoring drinking water quality

    Science.gov (United States)

    Højris, Bo; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen; Smith, Christian; Dahlqvist, Mathis

    2016-04-01

    Today, microbial drinking water quality is monitored through either time-consuming laboratory methods or indirect on-line measurements. Results are thus either delayed or insufficient to support proactive action. A novel, optical, on-line bacteria sensor with a 10-minute time resolution has been developed. The sensor is based on 3D image recognition, and the obtained pictures are analyzed with algorithms considering 59 quantified image parameters. The sensor counts individual suspended particles and classifies them as either bacteria or abiotic particles. The technology is capable of distinguishing and quantifying bacteria and particles in pure and mixed suspensions, and the quantification correlates with total bacterial counts. Several field applications have demonstrated that the technology can monitor changes in the concentration of bacteria, and is thus well suited for rapid detection of critical conditions such as pollution events in drinking water.

  12. Time-Varying FOPDT Modeling and On-line Parameter Identification

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Sun, Zhen

    2013-01-01

    A type of Time-Varying First-Order Plus Dead-Time (TV-FOPDT) model is extended from SISO format into a MISO version by explicitly taking the disturbance input into consideration. Correspondingly, a set of on-line parameter identification algorithms oriented to MISO TV-FOPDT model are proposed bas...... are firstly illustrated through a numerical example, and then applied to investigate transient superheat dynamic modeling in a supermarket refrigeration system....... on the Mixed-Integer-Nonlinear Programming, Least-Mean-Square and sliding window techniques. The proposed approaches can simultaneously estimate the time-dependent system parameters, as well as the unknown disturbance input if it is the case, in an on-line manner. The proposed concepts and algorithms...

  13. On-line sample treatment and FT-IR determination of doxylamine succinate in pharmaceuticals.

    Science.gov (United States)

    Ventura-Gayete, Josep F; de la Guardia, Miguel; Garrigues, Salvador

    2006-12-15

    A low solvent consumption method for Fourier transform infrared spectroscopy (FT-IR) determination of doxylamine succinate in pharmaceuticals has been developed. The analyte was continuous and selectively extracted with a 13% (v/v) ethanol:chloroform solvent mixture, recirculating the solvent through the sample and monitoring the process by FT-IR. Doxylamine succinate was determined by on-line standard addition measuring the peak area in the regions 1730-1710 and 1485-1462cm(-1) corrected with a two-point baseline established between 2000 and 1800cm(-1). This new method implies low volumes of chloroformic solvent mixture, only 2.6mL per sample, in front of classical batch FT-IR methods, improving analytical efficiency and reducing waste generation. The on-line extraction and standard addition determination of doxylamine succinate allowed a throughput of 10h(-1).

  14. Robust On-Line Fault Diagnosis for Nonlinear Difference-Algebraic Systems Using Least Squares Estimate

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new robust on-line fault diagnosis method based on least squares estimate for nonlinear difference-algebraic systems (DAS) with uncertainties is proposed. Based on the known nominal model of the DAS, this method firstly constructs an auxiliary system consisting of a difference equation and an algebraic equation, then, based on the relationship between the state deviation and the faults in the difference equation and the relationship between the algebraic variable deviation and the faults in algebraic equation, it identifies the faults on-line through least squares estimate. This method can not only detect, isolate and identify faults for DAS, but also give the upper bound of the error of fault identification. The simulation results indicate that it can give satisfactory diagnostic results for both abrupt and incipient faults.

  15. On-line least squares support vector machine algorithm in gas prediction

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xiao-hu; WANG Gang; ZHAO Ke-ke; TAN De-jian

    2009-01-01

    Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions. The Support Vector Machine (SVM) is a new machine learning algorithm that has excellent properties. The least squares support vector machine (LS-SVM) algorithm is an improved algorithm of SVM. But the common LS-SVM algorithm, used directly in safety predictions, has some problems. We have first studied gas prediction problems and the basic theory of LS-SVM. Given these problems, we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm, based on LS-SVM. Finally, given our observed data, we used the on-line algorithm to predict gas emissions and used other related algorithm to com- pare its performance. The simulation results have verified the validity of the new algorithm.

  16. On-line Viterbi Algorithm and Its Relationship to Random Walks

    CERN Document Server

    ?rámek, Rastislav; Vina?, Tomá?

    2007-01-01

    In this paper, we introduce the on-line Viterbi algorithm for decoding hidden Markov models (HMMs) in much smaller than linear space. Our analysis on two-state HMMs suggests that the expected maximum memory used to decode sequence of length $n$ with $m$-state HMM can be as low as $\\Theta(m\\log n)$, without a significant slow-down compared to the classical Viterbi algorithm. Classical Viterbi algorithm requires $O(mn)$ space, which is impractical for analysis of long DNA sequences (such as complete human genome chromosomes) and for continuous data streams. We also experimentally demonstrate the performance of the on-line Viterbi algorithm on a simple HMM for gene finding on both simulated and real DNA sequences.

  17. Towards On-line Automated Semantic Scoring of English-Chinese Translation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Described and exemplified a semantic scoring system of students' on-line English-Chinese translation.To achieve accurate assessment, the system adopted a comprehensive method which combines semantic scoring with keyword matching scoring. Four kinds of words-verbs, adjectives, adverbs and "the rest" including nouns, pronouns, idioms, prepositions, etc. , are identified after parsing. The system treats different words tagged with different part of speech differently. Then it calculated the semantic similarity between these words of the standard versions and those of students'translations by the distinctive differences of the semantic features of these words with the aid of HowNet. The first semantic feature of verbs and the last semantic features of adjectives and adverbs are calculated. "The rest" is scored by keyword matching. The experiment results show that the semantic scoring system is applicable in fulfilling the task of scoring students'on-line English-Chinese translations.

  18. MODULAR RESEARCH EQUIPMENT FOR ON-LINE INSPECTION IN ADVANCED MANUFACTURING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Davrajh, S.

    2012-11-01

    Full Text Available The significance of inspection processes increases when producing parts with high levels of customer input. These processes must adapt to variations in significant product characteristics. Mass customisation and reconfigurable manufacturing are currently being researched as ways to respond to high levels of customer input. This paper presents the research and development of modular inspection equipment that was designed to meet the on-line quality requirements of mass customisation and reconfigurable manufacturing environments. Simulated results were analysed for application in an industrial environment. The implementation of the equipment in South Africa is briefly discussed. The research indicates that manufacturers need only invest in the required equipment configurations when they are needed for on-line inspection.

  19. Recent studies to improve release properties from thick isotope separator on-line fission targets

    CERN Document Server

    Lau, C; Verney, D; Bajeat, O; Ibrahim, F; Clapier, F; Cottereau, E; Donzaud, C; Ducourtieux, M; Essabaa, S; Guillemaud-Müller, D; Hosni, F; Lefort, H; Le Blanc, F; Müller, A C

    2003-01-01

    In the framework of the PARRNe program (Production d'Atomes Radioactifs Riches en Neutrons) of IPN Orsay, various techniques are currently used to characterize the release properties of elements of interest from a UC//X target. On-line studies have been carried out with two plasma ion sources: a Nier-Bernas and a hot plasma ISOLDE- type (the ISOLDE collaboration kindly supplied us a MK5 ion source for these studies). In parallel, the analysis of the chemical and structure properties of some UC//X samples as function of heating conditions has been carried out. Such data are essential to determine optimal conditions for the production of isotopes by the isotope separator on-line (ISOL) technique. First results are presented here for Kr and Ag. Investigations for other kinds of fission targets are planned.

  20. Multi-Stratum Networks: toward a unified model of on-line identities

    DEFF Research Database (Denmark)

    Rossi, Luca; Magnani, Matteo

    2012-01-01

    interacting to several communities active on various technological infrastructures like Twitter, Facebook, YouTube or FourSquare and with distinct social objectives. This constitutes a complex network of interconnected networks where users' identities are spread and where information propagates navigating......One of the reasons behind the success of Social Network Analysis is its simple and general graph model made of nodes (representing individuals) and ties. However, when we focus on our daily on-line experience we must confront a more complex scenario: people inhabitate several on-line spaces...... through different communities and social platforms. In this article we introduce a model for this layered scenario that we call multi-stratum network. Through a theoretical discussion and the analysis of real-world data we show how not only focusing on a single network may provide a very partial...

  1. Mass transport and direction dependent battery modeling for accurate on-line power capability prediction

    Energy Technology Data Exchange (ETDEWEB)

    Wiegman, H.L.N. [General Electric Corporate Research and Development, Schenectady, NY (United States)

    2000-07-01

    Some recent advances in battery modeling were discussed with reference to on-line impedance estimates and power performance predictions for aqueous solution, porous electrode cell structures. The objective was to determine which methods accurately estimate a battery's internal state and power capability while operating a charge and sustaining a hybrid electric vehicle (HEV) over a wide range of driving conditions. The enhancements to the Randles-Ershler equivalent electrical model of common cells with lead-acid, nickel-cadmium and nickel-metal hydride chemistries were described. This study also investigated which impedances are sensitive to boundary layer charge concentrations and mass transport limitations. Non-linear impedances were shown to significantly affect the battery's ability to process power. The main advantage of on-line estimating a battery's impedance state and power capability is that the battery can be optimally sized for any application. refs., tabs., figs., append.

  2. Program in geothermal well technology directed toward achieving DOE/DGE power-on-line goals

    Energy Technology Data Exchange (ETDEWEB)

    Polito, J.; Varnado, S.G.

    1978-10-01

    This document presents the material used in an oral presentation to the DOE/Division of Geothermal Energy, which was designed to illustrate the importance of well technology development in reducing geothermal well costs, and to achieve geothermal power-on-line goals. Examination of recent studies of the economics of geothermal energy leads to the conclusion that the overall sensitivity of geothermal power-on-line to well cost is in the range of one to two. Current data suggest that a vigorous R and D program in rotary drilling technology can reduce geothermal drilling costs by about 20%, but a reduction of 40 to 50% is needed to achieve DOE/DGE goals. Research in advanced drilling systems is needed to satisfy this more stringent requirement. Some critical technological deficiencies that occur when current rotary drilling techniques are used for geothermal drilling are discussed. A broadly based development program directed at correcting these deficiencies is defined.

  3. The PerTOHS Theory for On-Line Handwriting Segmentation

    Directory of Open Access Journals (Sweden)

    Mahmoud Ltaief

    2012-09-01

    Full Text Available In this paper, we present PerTOHS theory for on-line handwriting segmentation, based on the fact that in order to identify patterns, our human perceptual system is based on basic features called perceptual codes. Analysing handwriting, we notice the existence of elementary and global ones. Perceptual organization of elementary perceptual codes in various constraints generates global ones, and to obtain different forms of handwriting, we proceed by combining them. We develop a new approach to improve handwriting segmentation via perceptual codes. The proposed architecture uses the Beta-elliptic model for the generation of on-line handwriting scripts, the fuzzy set theory to detect the elementary perceptual codes and the genetic algorithms for the global perceptual ones. This theory has been tested on the developed MAYASTROUN database, and IRONOFF database. The achieved results show successful representations of handwritten script via perceptual codes and good segmentation rate is obtained.

  4. Development of On-Line Monitoring Systems for High Temperature Components in Power Plants

    Science.gov (United States)

    Zhang, Hongcai; Jia, Jiuhong; Wang, Ning; Hu, Xiaoyin; Tu, Shan-Tung; Zhou, Shaoping; Wang, Zhengdong

    2013-01-01

    To accurately detect deformation and extend the component life beyond the original design limits, structural safety monitoring techniques have attracted considerable attention in the power and process industries for decades. In this paper an on-line monitoring system for high temperature pipes in a power plant is developed. The extension-based sensing devices are amounted on straight pipes, T-Joints and elbows of a main steam pipeline. During on-site monitoring for more than two years, most of the sensors worked reliably and steadily. However, the direct strain gauge could not work for long periods because of the high temperature environment. Moreover, it is found that the installation and connection of the extensometers can have a significant influence on the measurement results. The on-line monitoring system has a good alarming function which is demonstrated by detecting a steam leakage of the header. PMID:24233026

  5. On-line Cutting Quality Recognition in Milling Using a Radical Basis Function Neural Network

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Tool wear, chatter vibration, chip breaking and built-up edge are main phenomena to be monitored in modern manufacturing processes, which are considered as important factors to the quality of products.They are closely related to the cutting parameters, which are to be selected in manufacturing process.However, it is very difficult to measure directly the cutting quality based on on-line monitoring.In this study, the relationship between the cutting parameters and cutting quality is analyzed.A Radical Basis Function (RBF) neural network based on-line quality recognition scheme is also presented, which monitors the level of surface roughness.The experimental results reveal that the RBF neural network has a high prediction success rate.

  6. An on-line algorithm for creating self-organizing fuzzy neural networks.

    Science.gov (United States)

    Leng, Gang; Prasad, Girijesh; McGinnity, Thomas Martin

    2004-12-01

    This paper presents a new on-line algorithm for creating a self-organizing fuzzy neural network (SOFNN) from sample patterns to implement a singleton or Takagi-Sugeno (TS) type fuzzy model. The SOFNN is based on ellipsoidal basis function (EBF) neurons consisting of a center vector and a width vector. New methods of the structure learning and the parameter learning, based on new adding and pruning techniques and a recursive on-line learning algorithm, are proposed and developed. A proof of the convergence of both the estimation error and the linear network parameters is also given in the paper. The proposed methods are very simple and effective and generate a fuzzy neural model with a high accuracy and compact structure. Simulation work shows that the SOFNN has the capability of self-organization to determine the structure and parameters of the network automatically.

  7. Infrastructures and Monitoring of the on-line CMS computing centre

    CERN Document Server

    Bauer, Gerry; Biery, Kurt; Branson, James G; Cano, Eric; Cheung, Harry; Ciganek, Marek; Cittolin, Sergio; Antonio, Jose; Deldicque, Christian; Dusinberre, Elizabeth; Erhan, Samim; Fortes, Fabiana; Gigi, Dominique; Glege, Frank; Gomez-Reino, Robert; Gutleber, Johannes; Hatton, Derek; Laurens, Jean-francois; David, Elliot; Antonio, Juan; Meijers, Frans; Meschi, Emilio; Meyer, Andreas Bernhard; Moser, Robin; O'Dell, Vivian; Oh, Alexander; Orsini, Luciano; Patras, Vaios; Paus, Christoph; Petrucci, Andrea; Pieri, Marco; Pollet, Lucien; Racz, Attila; Sakulin, Hannes; Sani, Matteo; Schieferdecker, Philipp; Schwick, Christoph; Simon, Sean; Sumorok, Konstanty; Varela, Joao; Zanetti, Marco

    2008-01-01

    This paper describes in detail the infrastructure and installation of the CMS on-line computing centre (CMSOLC) and its associated monitoring system. In summer 2007, 640 PCs acting as detector Readout Units for the CMS Data Acquisition System (DAQ) were deployed along with ~150 servers for DAQ general services. Since summer 2008, ~900 PCs acting as DAQ Event Builder Units/Filter Units have been added and today, the CMSOLC has an on-line processing capability sufficient for a Level 1 trigger accept rate of 50 kHz. To ensure that these ~1700 PCs are running efficiently, a multi-level monitoring system has been put in place. This system is also described in this paper.

  8. On-Line Measurement of Heat of Combustion of Gaseous Hydrocarbon Fuel Mixtures

    Science.gov (United States)

    Sprinkle, Danny R.; Chaturvedi, Sushil K.; Kheireddine, Ali

    1996-01-01

    A method for the on-line measurement of the heat of combustion of gaseous hydrocarbon fuel mixtures has been developed and tested. The method involves combustion of a test gas with a measured quantity of air to achieve a preset concentration of oxygen in the combustion products. This method involves using a controller which maintains the fuel (gas) volumetric flow rate at a level consistent with the desired oxygen concentration in the combustion products. The heat of combustion is determined form a known correlation with the fuel flow rate. An on-line computer accesses the fuel flow data and displays the heat of combustion measurement at desired time intervals. This technique appears to be especially applicable for measuring heats of combustion of hydrocarbon mixtures of unknown composition such as natural gas.

  9. MultiProbe Electrical Measurements of Carbon Nanotubes With On-line Raman Scattering

    Science.gov (United States)

    Yablon, Dalia; Yeshua, Talia; Lehmann, Christian; Reich, Stephanie; Strain, Kristin; Campbell, Eleano

    2014-03-01

    A multiprobe scanning probe microscope (SPM) system has been used to perform multiprobe electrical measurement of carbon nanotubes. In this system two probes can be used across an isolated carbon nanotube. A variety of probes have been developed that are compatible with multiprobe operation. These include probes for writing single single walled carbon nanotubes which have a high degree of alignment and this is demonstrated with on-line Raman. The interconnection of the multiprobe system with the Raman System will be described in detail. The combination has the potential to cross the fabrication/measurement gap that will allow for both production and nanocharacterization of such single molecule carbon nanotube molecular devices both with chemically sensitive Raman measurements (with and without plasmonic enhancement) and with on-line electrical transport on isolated carbon nanotubes.

  10. ON-LINE SELF-TESTING FOR MICRO-MACHINED GYROSCOPES

    Institute of Scientific and Technical Information of China (English)

    GAISSERAlexander; GAOZhong-yu; ZHANGRong; CHENZhi-yong; ZHOUBin

    2005-01-01

    An on line self-testing for Coriolis vibratory gyroscopes (CVGs) is realized according to a digital readout electronics for capacitive sensors and micro-machined angular rate sensors. By applying some additional signals to the micro machined structure, the actual noise performance (<0.1°/s) is not worsened. The running of the primary and the secondary oscillators of CVGs is verified by self-testing. Compared with other methods, the device needs not to check the functionality. In this new approach the on-line testing is conducted at any time without disturbing the normal operational mode. Based on the approach the performance of the micro machined gyroscope can be improved and a secure availability of the functionality of the micro-machined angular rate sensor is guaranteed. Furthermore, the error signal is generated when the sensor works incorrectly.

  11. Using meteorological forecasts in on-line predictions of wind power

    DEFF Research Database (Denmark)

    Nielsen, Torben Skov; Nielsen, Henrik Aalborg; Madsen, Henrik

    1999-01-01

    This report describes a model investigation into wind power prediction model as well as a tool for predicting the power production from wind turbines in an area - the Wind Power Prediction Tool (WPPT). The predictions are based on on-line measurements of power production for a selected set of ref...... of reference wind farms in the area as well as numerical weather predictions covering the locations of the reference wind farms. WPPT is in operational use in the Western part of Denmark and the utilities experiences with the tool is presented.......This report describes a model investigation into wind power prediction model as well as a tool for predicting the power production from wind turbines in an area - the Wind Power Prediction Tool (WPPT). The predictions are based on on-line measurements of power production for a selected set...

  12. On-Line Tracking Controller for Brushless DC Motor Drives Using Artificial Neural Networks

    Science.gov (United States)

    Rubaai, Ahmed

    1996-01-01

    A real-time control architecture is developed for time-varying nonlinear brushless dc motors operating in a high performance drives environment. The developed control architecture possesses the capabilities of simultaneous on-line identification and control. The dynamics of the motor are modeled on-line and controlled using an artificial neural network, as the system runs. The control architecture combines the experience and dependability of adaptive tracking systems with potential and promise of the neural computing technology. The sensitivity of real-time controller to parametric changes that occur during training is investigated. Such changes are usually manifested by rapid changes in the load of the brushless motor drives. This sudden change in the external load is simulated for the sigmoidal and sinusoidal reference tracks. The ability of the neuro-controller to maintain reasonable tracking accuracy in the presence of external noise is also verified for a number of desired reference trajectories.

  13. First Field Experience of On-line Partial Discharge Monitoring of MV Cable Systems with location

    Energy Technology Data Exchange (ETDEWEB)

    Van der Wielen, P.; Steennis, F.

    2009-06-15

    A new measuring system is presented for the on-line monitoring and location of partial discharges (PDs) in medium-voltage power cables. The system uses two inductive sensors, each at one cable end. The measuring system is called PD-OL, which stands for PD detection Online with Location. A pulse injection system is used for the time synchronization of the data intake at both cable ends and for the on-line calibration. PD data is send via internet to the KEMA Control Center for interpretation and final presentation, made visible on a secured website for the network owners. This paper discusses the basics of PD-OL and a number of measurement results.

  14. On-Line Partial Discharge Monitoring and Diagnostic System for Power Transformer

    Institute of Scientific and Technical Information of China (English)

    LIN Du; JIANG Lei; LI Fuqi; ZHU Deheng; TAN Kexiong; WU Chengqi; JIN Xianhe; WANG Changchang; CHENG T. C.

    2005-01-01

    This paper introduces a computerized on-line partial discharge (PD) monitoring and diagnostic system for transformers. The system, which is already in use in a power station, uses wide-band active transducers and a data acquisition unit with modularized and exchangeable components. The system software is a power equipment monitoring and diagnostic system, which is based on the component object model, and was developed for monitoring multiple parameters in multiple power supply systems. The statistical characteristics of PDs in power transformers were studied using 7 experimental models for simulating PDs in transformers and 3 models for simulating interfering discharges in air. The discharge features were analyzed using a 3-D pattern chart with a three-layer back-propagation artificial neural network used to recognize the patterns. The results show that PDs in air and oil can be distinguished. The model can be used for interference rejection on-line monitoring of partial discharge in transformers.

  15. A New Algorithm for On- Line Handwriting Signature Verification Based on Evolutionary Computation

    Institute of Scientific and Technical Information of China (English)

    ZHENG Jianbin; ZHU Guangxi

    2006-01-01

    The paper proposes an on-line signature verification algorithm, through which test sample and template signatures can be optimizedly matched, based on evolutionary computation (EC). Firstly, the similarity of signature curve segment is defined, and shift and scale transforms are also introduced due to the randoness of on-line signature. Secondly,this paper puts forward signature verification matching algorithm after establishment of the mathematical model. Thirdly, the concrete realization of the algorithm based on EC is discussed as well. In addition, the influence of shift and scale on the matching result is fully considered in the algorithm.Finally, a computation example is given, and the matching results between the test sample curve and the template signature curve are analyzed in detail. The preliminary experiments reveal that the type of signature verification problem can be solved by EC.

  16. Probabilistic Forecasting for On-line Operation of Urban Drainage Systems

    DEFF Research Database (Denmark)

    Löwe, Roland

    -box model approach. Building on previous work concerning the development of conceptual stochastic rainfall-runoff model structures, we - investigate approaches for the calibration of model parameters that tune the models for multistep predictions, - develop an approach for generating probabilistic multistep......This thesis deals with the generation of probabilistic forecasts in urban hydrology. In particular, we focus on the case of runoff forecasting for real-time control (RTC) on horizons of up to two hours. For the generation of probabilistic on-line runoff forecasts, we apply the stochastic grey...... predictions of runoff volume in an on-line setting, - develop a new approach for dynamically modelling runoff forecast uncertainty. We investigate how rainfall inputs can be optimally combined for runoff forecasting with stochastic grey-box models and what effect different types of radar rainfall measurements...

  17. On-line Batch Process Monitoring with Improved Multi-way Independent Component Analysis

    Institute of Scientific and Technical Information of China (English)

    GUO Hui; LI Hongguang

    2013-01-01

    In the past decades,on-line monitoring of batch processes using multi-way independent component analysis (MICA) has received considerable attention in both academia and industry.This paper focuses on two troublesome issues concerning selecting dominant independent components without a standard criterion and determining the control limits of monitoring statistics in the presence of non-Gaussian distribution.To optimize the number of key independent components,we introduce a novel concept of system deviation,which is able to evaluate the reconstructed observations with different independent components.The monitored statistics are transformed to Gaussian distribution data by means of Box-Cox transformation,which helps readily determine the control limits.The proposed method is applied to on-line monitoring of a fed-batch penicillin fermentation simulator,and the experimental results indicate the advantages of the improved MICA monitoring compared to the conventional methods.

  18. On-line current feed and computer aided control tactics for automatic balancing head

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In the designed automatic balancing head,a non-contact induction transformer is used to deliver driving energy to solve the problem of current fed and controlling on-line.Computer controlled automatic balancing experiments with phase-magnitude control tactics were performed on a flexible rotor system.Results of the experiments prove that the energy feeding method and the control tactics are effective in the automatic balancing head for vibration controlling.

  19. On-line separation of refractory hafnium and tantalum isotopes at the ISOCELE separator

    CERN Document Server

    Liang, C F; Obert, J; Paris, P; Putaux, J C

    1981-01-01

    By chemical evaporation technique, neutron deficient hafnium nuclei have been on-line separated at the ISOCELE facility, from the isobar rare-earth elements, in the metal-fluoride HfF/sub 3//sup +/ ion form. Half-lives of /sup 162-165/Hf have been measured. Similarly, tantalum has been selectively separated on the TaF/sub 4//sup +/ form. (4 refs) .

  20. Adaptive on-line classification of multi-spectral scanner data

    Science.gov (United States)

    Fromm, F. R.; Northouse, R. A.

    1973-01-01

    A possible solution to the analysis of the massive amounts of multi-spectral scanner data from the Earth Resource Technical Satellite (ERTS) program is proposed. This solution is offered as an adaptive on-line classification scheme. The classifier is described as well as its controller which is based on ground truth data. Cluster analysis is presented as an alternative approach to the ground truth data. Adaptive feature selection is discussed and possible mini-computer implementations are offered.

  1. Improving health care professionals' feedback on communication skills: Development of an on-line resource

    OpenAIRE

    Harrison, G; Hayden, S.; Cook, V.; Cushing, A

    2012-01-01

    Objective: This project aimed to develop an open-access on-line resource to assist health care professionals in providing effective feedback on patient-centered clinical and communication skills. The collaborative nature of the development of this learning resource is outlined and evaluation of its use is discussed. Methods: An inter-professional team of teaching staff from two London Universities employed a researcher to interview experienced clinical and academic health care professiona...

  2. On-Line Texture Diagnostics for Coated Conductor Manufacture. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    White, M. K.

    2002-12-30

    This Phase I project was undertaken to assess the feasibility of implementing a particular diagnostic method for characterizing the crystallographic texture of high temperature superconductor (HTS) coated conductors on-line during their reel-to-reel continuous manufacture. Key factors in this technique were the use of an area detector to greatly reduce scan time, an x-ray mirror to enhance incident beam brightness, and an automation scheme for diffractometer control, tape motion control, and calculation and output of texture characterizations.

  3. Difference to Inference: teaching logical and statistical reasoning through on-line interactivity.

    Science.gov (United States)

    Malloy, T E

    2001-05-01

    Difference to Inference is an on-line JAVA program that simulates theory testing and falsification through research design and data collection in a game format. The program, based on cognitive and epistemological principles, is designed to support learning of the thinking skills underlying deductive and inductive logic and statistical reasoning. Difference to Inference has database connectivity so that game scores can be counted as part of course grades.

  4. On-line Delivery for Serbo-Croatian (Bosniac, Croatian, Serbian: Tailoring Technology to the Learner

    Directory of Open Access Journals (Sweden)

    Danko Sipka

    2004-01-01

    Full Text Available Tbis paper discusses the project of full on-line delivery of an introductory Serbo-Croatian (Bosniac, Croatian, Serbian course at the Arizona State University Critical Languages Institute. The issue of tailoring technology to meet diversified needs of a wide range of learners (from heritage speakers of the three Serbo-Croatian speaking ethnic communities to professional non-heritage learners is in the center of the discussion.

  5. Local communities on-line: mapping local Web-TVs in Italy

    OpenAIRE

    Giacomo Andreucci

    2013-01-01

    A wider spreading of broadband in Italy in recent years has led to the birth of many web-TVs originating from a variety of actors (educational institutions, public administrations, informal groups, etc.). A specific role is being played by local communities (neighborhoods, social centers, parishes, etc.) which, thanks to the on-line spreading of video content, can have their own TV channel to reach their members and promote themselves in global networks. This essay will map the distribution o...

  6. On-line high speed lipid extraction for nanoflow liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Lee, Ju Yong; Yang, Joon Seon; Park, Se Mi; Byeon, Seul Kee; Moon, Myeong Hee

    2016-09-16

    An on-line lipid extraction method is introduced by utilizing a short capillary extraction column using HILIC and C4 particles prior to nanoflow liquid chromatography-tandem mass spectrometry (nLC-MS/MS). The on-line extraction using a urine sample spiked with PL standards showed similar or slightly higher recovery values (86%-96%) of phospholipids (PLs) compared to those obtained by the conventional off-line extraction based on the Folch method with or without using the air-exposed drying process. In this study, we demonstrated that PL oxidation can occur during the air-exposed drying process of lipid extracts in standard liquid-liquid extraction procedures, which was confirmed by the oxidized PL (OxPL) molecules that were generated from an off-line extraction using a few PL standards. Quantitative comparison of these OxPL species between on- and off-line extraction followed by nLC-MS/MS with multiple reaction monitoring (MRM) analysis showed a significant decrease (2-10 fold) in unwanted OxPL species when on-line extraction was employed. While the number of identified PLs from a urine sample was somewhat lower than those by off-line extraction, the number of OxPLs was significantly reduced (from 70 to 22) with on-line extraction. The new method offers high speed (∼5min) automated extraction of PLs with nLC-MS/MS analysis and presents the possibility of handling a biological sample with a very limited amount of lipids.

  7. SkyMouse: A smart interface for astronomical on-line resources and services

    OpenAIRE

    Cui, Chen-Zhou; SUN, Hua-Ping; Zhao, Yong-heng; Luo, Yu; QI, Da-Zhi

    2007-01-01

    With the development of network and the World Wide Web (WWW), the Internet has been growing and changing dramatically. More and more on-line database systems and different kinds of services are available for astronomy research. How to help users find their way through the jungle of information services becomes an important challenge. Although astronomers have been aware of the importance of interoperability and introduced the concept of Virtual Observatory as a uniform environment for future ...

  8. Protecting Copyrights on the Internet——Local authorities' efforts to tackle on line piracy

    Institute of Scientific and Technical Information of China (English)

    Audrey

    2009-01-01

    @@ Vice-Minister Yan Xiao-hong from the National Copyright Administration of China(NCAC),Assistant Minister Chong Ouan from the Ministry of Commerce(MOFCOM)and Mr Antoine Seillan,Counsellor of the EC Delegation to China were in Yingchuan on June 18,to open a seminar on-line piracy copyright protection and enforcement on the internet involving more than 80 officials from China's local copyright authorities,cultural bureaus and judiciary.

  9. A least mean squares CUBIC algorithm for on-line differential of sampled analog signals

    Science.gov (United States)

    Allum, J. H. J.

    1975-01-01

    A digital computer algorithm is developed for on-line time differentiation of sampled analog voltage signals. The derivative is obtained by employing a least mean squares technique. The recursive algorithm results in a considerable reduction in computer time compared to a complete new solution of the normal equations each time a new data point is accepted. Implementation of the algorithm on a digital computer is discussed. Examples are simulated on a DEC PDP-8 computer.

  10. FDD-1 System On-line Monitoring Fuel Rod Failure of Nuclear Power Plant

    Institute of Scientific and Technical Information of China (English)

    CHENPeng; ZHANGYing-chao; JISong-tao; GAOYong-guang; YINZhen-guo; HANChuan-bin

    2003-01-01

    The FDD-1 system developed by CIAE for on-line monitoring fuel rod failure of nuclear power plant consists of γ-ray detector, γ-ray spectrum analyzer, computer, and an analysis code for evaluating the status of fuel rod failure. It would be determined that the fuel rod failure occurs when a large amount of γ activity increases in the primary system measured by γ-ray detector near the CVCS.

  11. On-Line Bunch Tomography and Beam Modelling for MTE Commissioning

    CERN Document Server

    Rothe, Johannes

    2015-01-01

    For my stay as a CERN Summer Student from June 29 to September 25, 2015, I worked with Guido Sterbini of the Accelerator and Beam Physics group. I was based in the CERN Control Center (CCC) at the Prevessin Site, and supported the ongoing beam commissioning work on Multi-Turn Extraction through the development of on-line monitoring and control tools for the Proton Synchrotron (PS) machine.

  12. Development of an on-line monitoring expert system for heating system fouling

    Science.gov (United States)

    Wang, Yuan-yuan; Wang, Jian-guo

    2008-12-01

    This paper intends to develop an on-line monitoring expert system for heating system fouling. It chooses pressure, flowing and temperature as basic diagnostic variables. The basic evaluative guide lines are the coefficient of flowing resistance, the efficiency and cost of heating system. This system can be used to monitor the fouling degrees and estimate the fouling positions. The expert system is programmed by Delphi to realize all functions.

  13. Use of the Riccatti Equation On-Line for Adaptively Controlling a CSTR Chemical Reactor.

    OpenAIRE

    Edwards, J B; Mohd Noor, S.B.

    1995-01-01

    An idealised nonlinear model of an isothermal continuous stirred-tank reactor (CSTR) is analysed and simulated for optimal control based on the continuous on-line recomputation of a Riccati Controller as proposed by Banks (1). The controller and resulting behaviour are derived analytically and confirmed to be optimal by derivation also via Dynamic Programming. For comparison purposes, the behaviour of the same model under linear proportional control (with feedforward compensation)is derived a...

  14. Recent changes in the GenBank On-line Service.

    OpenAIRE

    Benton, D

    1990-01-01

    The GenBank On-line Service provides access to the GenBank and EMBL nucleic acid sequence databases and to the Swiss-Prot and GenPept protein sequence databases. Users can query the databases by sequence similarity and annotation keywords and retrieve entries of interest. This access is available through e-mail servers, anonymous FTP, anonymous interactive login, and login to established, password-protected, individual accounts.

  15. Application of on-line NIR spectroscopy in fuel pellet production

    Energy Technology Data Exchange (ETDEWEB)

    Grothage, Morgan; Svensson, Elin; Johnsson, Bo [Casco Adhesives AB, Sundsvall (Sweden); Lestander, Torbjoern A. [Swedish Univ of Agricultural Science, Umeaa (Sweden). Unit of Biomass Technology and Chemistry

    2006-07-15

    Different possibilities of installation of on-line NIR spectrometers in various process environments in the fuel Pellets process were investigated using moisture content on dried wood raw material as the model analyte. Scanning NIR instruments of different types and to some extent diode-array instrument were used. Real time predictions of moisture content from partial least squares regression models were presented to the process operators using dedicated software.

  16. Algorithms for On-line Order Batching in an Order-Picking Warehouse

    OpenAIRE

    Sebastian Henn

    2009-01-01

    In manual order picking systems, order pickers walk or ride through a distribution warehouse in order to collect items required by (internal or external) customers. Order batching consists of combining these – indivisible – customer orders into picking orders. With respect to order batching, two problem types can be distinguished: In off-line (static) batching all customer orders are known in advance. In on-line (dynamic) batching customer orders become available dynamically over time. This r...

  17. Developing an EEG based On-line Closed-loop Lapse Detection and Mitigation System

    Directory of Open Access Journals (Sweden)

    Yu-Te eWang

    2014-10-01

    Full Text Available In America, sixty percent of adults reported that they have driven a motor vehicle while feeling drowsy, and at least 15-20% of fatal car accidents are fatigue-related. This study translates previous laboratory-oriented neurophysiological research to design, develop, and test an On-line Closed-loop Lapse Detection and Mitigation (OCLDM System featuring a mobile wireless dry-sensor EEG headgear and a cell-phone based real-time EEG processing platform. Eleven subjects participated in an event-related lane-keeping task, in which they were instructed to manipulate a randomly deviated, fixed-speed cruising car on a 4-lane highway. This was simulated in a 1st person view with an 8-screen and 8-projector immersive virtual-realty environment. When the subjects experienced lapses or failed to respond to events during the experiment, auditory feedback was delivered to rectify the performance decrements. However, the arousing auditory signals were not always effective. The EEG spectra exhibited statistically significant differences between effective and ineffective arousing signals, suggesting that EEG spectra could be used as a countermeasure of the efficacy of arousing signals. In this on-line pilot study, the proposed OCLDM System was able to continuously detect EEG signatures of fatigue, deliver arousing feedback to subjects suffering momentary cognitive lapses, and assess the efficacy of the feedback in near real-time to rectify cognitive lapses. The on-line testing results of the OCLDM System validated the efficacy of the arousing signals in improving subjects' response times to the subsequent lane-departure events. This study may lead to a practical on-line lapse detection and mitigation system in real-world environments.

  18. On-line Batch Process Monitoring and Diagnosing Based on Fisher Discriminant Analysis

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xu; SHAO Hui-he

    2006-01-01

    A new on-line batch process monitoring and diagnosing approach based on Fisher discriminant analysis (FDA) was proposed. This method does not need to predict the future observations of variables, so it is more sensitive to fault detection and stronger implement for monitoring. In order to improve the monitoring performance,the variables trajectories of batch process are separated into several blocks. The key to the proposed approach for on-line monitoring is to calculate the distance of block data that project to low-dimension Fisher space between new batch and reference batch. Comparing the distance with the predefine threshold, it can be considered whether the batch process is normal or abnormal. Fault diagnosis is performed based on the weights in fault direction calculated by FDA. The proposed method was applied to the simulation model of fed-batch penicillin fermentation and the results were compared with those obtained using MPCA. The simulation results clearly show that the on-line monitoring method based on FDA is more efficient than the MPCA.

  19. Comparing the hierarchy of keywords in on-line news portals

    CERN Document Server

    Tibély, Gergely; Pollner, Péter; Palla, Gergely

    2016-01-01

    The tagging of on-line content with informative keywords is a widespread phenomenon from scientific article repositories through blogs to on-line news portals. In most of the cases, the tags on a given item are free words chosen by the authors independently. Therefore, relations among keywords in a collection of news items is unknown. However, in most cases the topics and concepts described by these keywords are forming a latent hierarchy, with the more general topics and categories at the top, and more specialised ones at the bottom. Here we apply a recent, cooccurrence-based tag hierarchy extraction method to sets of keywords obtained from four different on-line news portals. The resulting hierarchies show substantial differences not just in the topics rendered as important (being at the top of the hierarchy) or of less interest (categorised low in the hierarchy), but also in the underlying network structure. This reveals discrepancies between the plausible keyword association frameworks in the studied news...

  20. A reconfigurable on-line learning spiking neuromorphic processor comprising 256 neurons and 128K synapses.

    Science.gov (United States)

    Qiao, Ning; Mostafa, Hesham; Corradi, Federico; Osswald, Marc; Stefanini, Fabio; Sumislawska, Dora; Indiveri, Giacomo

    2015-01-01

    Implementing compact, low-power artificial neural processing systems with real-time on-line learning abilities is still an open challenge. In this paper we present a full-custom mixed-signal VLSI device with neuromorphic learning circuits that emulate the biophysics of real spiking neurons and dynamic synapses for exploring the properties of computational neuroscience models and for building brain-inspired computing systems. The proposed architecture allows the on-chip configuration of a wide range of network connectivities, including recurrent and deep networks, with short-term and long-term plasticity. The device comprises 128 K analog synapse and 256 neuron circuits with biologically plausible dynamics and bi-stable spike-based plasticity mechanisms that endow it with on-line learning abilities. In addition to the analog circuits, the device comprises also asynchronous digital logic circuits for setting different synapse and neuron properties as well as different network configurations. This prototype device, fabricated using a 180 nm 1P6M CMOS process, occupies an area of 51.4 mm(2), and consumes approximately 4 mW for typical experiments, for example involving attractor networks. Here we describe the details of the overall architecture and of the individual circuits and present experimental results that showcase its potential. By supporting a wide range of cortical-like computational modules comprising plasticity mechanisms, this device will enable the realization of intelligent autonomous systems with on-line learning capabilities.

  1. Corrosion product monitoring using an on-line X-ray fluorescence probe

    Energy Technology Data Exchange (ETDEWEB)

    Stauffer, C.C.; Connolly, D.J. [Babcock & Wilcox Research, Alliance, OH (United States); Millett, P. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-01-01

    The need for monitoring corrosion products is becoming increasingly important as power plants strive to minimize the effects of corrosion products on plant availability. Current methodology for monitoring corrosion products involves collection of samples using membrane filters followed by analysis of the membranes in the laboratory. This technique is labor intensive and provides only average values over lengthy sampling intervals. Recently, a laboratory tool, x-ray fluorescence spectroscopy, has been combined with on-line sampling capability resulting in an on-line instrument capable of measuring iron oxide particulates in a flowing stream at the ppb level and below. After development in the laboratory, the instrument was successfully field tested in a power plant and is currently undergoing a second field test at another plant. This paper will discuss the design and operation of the instrument, and field data obtained from plant service will be presented. Results show that this instrument will provide on-line measurements of iron oxides at the ppb level with minimal operator involvement.

  2. Object-Oriented Control System Design Using On-Line Training of Artificial Neural Networks

    Science.gov (United States)

    Rubaai, Ahmed

    1997-01-01

    This report deals with the object-oriented model development of a neuro-controller design for permanent magnet (PM) dc motor drives. The system under study is described as a collection of interacting objects. Each object module describes the object behaviors, called methods. The characteristics of the object are included in its variables. The knowledge of the object exists within its variables, and the performance is determined by its methods. This structure maps well to the real world objects that comprise the system being modeled. A dynamic learning architecture that possesses the capabilities of simultaneous on-line identification and control is incorporated to enforce constraints on connections and control the dynamics of the motor. The control action is implemented "on-line", in "real time" in such a way that the predicted trajectory follows a specified reference model. A design example of controlling a PM dc motor drive on-line shows the effectiveness of the design tool. This will therefore be very useful in aerospace applications. It is expected to provide an innovative and noval software model for the rocket engine numerical simulator executive.

  3. Prediction of XRF analyzers error for elements on-line assaying using Kalman Filter

    Institute of Scientific and Technical Information of China (English)

    Nakhaei F; Sam A; Mosavi MR; Nakhaei A

    2012-01-01

    Determination of chemical elements assay plays an important role in mineral processing operations.This factor is used to control process accuracy,recovery calculation and plant profitability.The new assaying methods including chemical methods,X-ray fluorescence and atomic absorption spectrometry are advanced and accurate.However,in some applications,such as on-line assaying process,high accuracy is required.In this paper,an algorithm based on Kalman Filter is presented to predict on-line XRF errors.This research has been carried out on the basis of based the industrial real data collection for evaluating the performance of the presented algorithm.The measurements and analysis for this study were conducted at the Sarcheshmeh Copper Concentrator Plant located in Iran.The quality of the obtained results was very satisfied; so that the RMS errors of prediction obtained for Cu and Mo grade assaying errors in rougher feed were less than 0.039 and 0.002 and in final flotation concentration less than 0.58 and 0.074,respectively.The results indicate that the mentioned method is quite accurate to reduce the on-line XRF errors measurement.

  4. On-line monitoring of the crystallization process: relationship between crystal size and electrical impedance spectra

    Science.gov (United States)

    Zhao, Yanlin; Yao, Jun; Wang, Mi

    2016-07-01

    On-line monitoring of crystal size in the crystallization process is crucial to many pharmaceutical and fine-chemical industrial applications. In this paper, a novel method is proposed for the on-line monitoring of the cooling crystallization process of L-glutamic acid (LGA) using electrical impedance spectroscopy (EIS). The EIS method can be used to monitor the growth of crystal particles relying on the presence of an electrical double layer on the charged particle surface and the polarization of double layer under the excitation of alternating electrical field. The electrical impedance spectra and crystal size were measured on-line simultaneously by an impedance analyzer and focused beam reflectance measurement (FBRM), respectively. The impedance spectra were analyzed using the equivalent circuit model and the equivalent circuit elements in the model can be obtained by fitting the experimental data. Two equivalent circuit elements, including capacitance (C 2) and resistance (R 2) from the dielectric polarization of the LGA solution and crystal particle/solution interface, are in relation with the crystal size. The mathematical relationship between the crystal size and the equivalent circuit elements can be obtained by a non-linear fitting method. The function can be used to predict the change of crystal size during the crystallization process.

  5. Experimentally obtaining on-line FRA in transformers by injecting controlled pulses

    Directory of Open Access Journals (Sweden)

    Eduardo Gómez-Luna

    2013-04-01

    Full Text Available Transformer monitoring based on the operating condition (on-line test has boomed in recent years because it allows early detection of risk situations or limitations regarding use to make appropriate decisions before a failure occurs. Frequency response analysis (FRA is one of the most heavily researched techniques for on-line development; it is based on obtaining a transformer’s frequency response (admittance, impedance or transfer function in a given bandwidth. This paper presents an experimental method for obtaining the frequency response with the transformer in service by injecting controlled pulses of the voltage signal using an external electronic circuit. Once the voltage and current signals had been recorded, the wavelet transform was used via multi-resolution analysis (MRA for filtering. This led to results being obtained without noise interference from the electrical system. The transfer function was obtained in terms of impedance, using the fast Fourier transform (FFT. The proposed method represented an alternative in solving some problems arising from the on-line FRA technique such as filtering and results’ repeatability. The tests involved a 5-kVA 1150/345 V three-phase transformer and a 3-kVA, 7620/240 V single-phase transformer in the Universidad del Valle’s High Voltage Laboratory.

  6. Evaluation of hygiene and safety controls for on-line paired hemodiafiltration (PHF).

    Science.gov (United States)

    Mandolfo, S; Corsi, A; Wratten, M L; Sereni, L; Imbasciati, E

    2006-02-01

    On-line hemodiafiltration is gaining popularity due to increasing evidence of clinical benefits however it also requires strict attention to hygiene and safety as notable quantities of liquid are reinfused into the patient. Although most centers are improving their attention to water quality, a frequent concern is the inadvertent or accidental contamination of water and whether the redundant safety controls are sufficient to protect the patient. In the present study, in order to simulate a worst-case safety condition, we tested in vitro the reliability of paired hemodiafiltration - (PHF), under low, moderate and high bacterial contamination of the water supply. Tests were performed using various bacterial concentrations (range 85-2000 cfu/mL) of Pseudomonas Aeruginosa. Samples were analyzed from different sites throughout the entire on-line hemodiafiltration circuit for bacteria endotoxin, fungus and ability to stimulate whole blood production of TNFalfa. In the in vitro contamination study, with the three bacterial concentrations tested at various points of the circuit, bacteria were below the level of detection and endotoxins were < 0.01 UE/mL. Addition of dialysate samples taken after the first stage of microfiltration, as well as after the first and second stage of ultrafiltration and incubated with whole blood were not associated with stimulated production of TNFalfa . PHF appeared to be a safe and feasible method for on-line hemodiafiltration even in the unforeseen presence of bacterial contamination of the feed water or water distribution system.

  7. Using VoiceThread to Promote Collaborative Learning in On-Line Clinical Nurse Leader Courses.

    Science.gov (United States)

    Fox, Ola H

    The movement to advance the clinical nurse leader (CNL) as an innovative new role for meeting higher health care quality standards continues with CNL programs offered on-line at colleges and universities nationwide. Collaborative learning activities offer the opportunity for CNL students to gain experience in working together in small groups to negotiate and solve care process problems. The challenge for nurse educators is to provide collaborative learning activities in an asynchronous learning environment that can be considered isolating by default. This article reports on the experiences of 17 CNL students who used VoiceThread, a cloud-based tool that allowed them to communicate asynchronously with one another through voice comments for collaboration and sharing knowledge. Participants identified benefits and drawbacks to using VoiceThread for collaboration as compared to text-based discussion boards. Students reported that the ability to hear the voice of their peers and the instructor helped them feel like they were in a classroom communicating with "real" instructor and peers. Students indicated a preference for on-line classes that used VoiceThread discussions to on-line classes that used only text-based discussion boards.

  8. From the Literature to the Data: Linking to On-line Data from the ADS

    Science.gov (United States)

    Eichhorn, G.; Accomazzi, A.; Grant, C. S.; Kurtz, M. J.; Rey Bakaikoa, V.; Murray, S. S.

    2001-12-01

    One of the important parts of the astronomy digital library is access to on-line data. The Astrophysics Data System (ADS) plays an important part in providing access to such data by linking from the published literature to related data sets. There are currently over 175,000 links to on-line data in the ADS. These links allow the user to directly access the data that are related to an article. We currently provide links to the following data centers: Astronomical Data Center, Goddard Space Flight Center Astronomy Digital Image Library, NCSA, Urbana-Champaign, IL Centre des Données astronomiques de Strasbourg, France Chandra Data Center, Harvard-Smithsonian CfA, Cambridge, MA European Southern Observatory, HST Proposals, Muenchen, Germany European Space Agency, ISO, Muenchen, Germany European Space Agency, IUE (several mirror sites) Space Telescope Science Institute, HST Proposals Space Telescope Science Institute, Multimission Archive University of Massachusetts, Amherst, MA University of Lausanne, Switzerland We encourage all organizations that have on-line data to provide us with the information necessary to install links from the ADS to their data. For information on how to implement such links please contact the first author at gei@cfa.harvard.edu The ADS is funded by NASA Grant NCC5-189.

  9. Applications of on-line multidimensional chromatography to solvent refined coal

    Energy Technology Data Exchange (ETDEWEB)

    Chen, T.M.; Apffel, J.A.; McNair, H.M.

    1981-03-29

    Solvent refined coal (SRC) is a complex mixture predominantly aromatic in nuture, and attempts to elucidate structure or compositional details by a single analytical technique have had limited success. Several on-line multidimensional chromatographic techniques were chosen to examine the hexane soluble fraction of SRC. These techniques include LC (silica gel)/LC (reverse phase); LC/GC; and LC/LC/Fluorescence. The latter technique proved to be the most useful and are discussed in detail in this paper. The conclusions of this study are: on-line coupled chromatographic techniques allow separations not easily done off-line. The on-line techniques are easily automated (increasing reproducibility) and allow small transfer volumes between systems. The main limitation with LC/LC is the incompatibility of mobile phases when the columns are normal phase and reverse phase. With LC/GC the main problem is quantitation (since only a portion of the peak is injected) and degradation of GC columns with some LC mobile phases. The use of selective detectors in series is a good technique to examine complex fractions like SRC and enhances the separating power.

  10. HOPE: An On-Line Piloted Handling Qualities Experiment Data Book

    Science.gov (United States)

    Jackson, E. B.; Proffitt, Melissa S.

    2010-01-01

    A novel on-line database for capturing most of the information obtained during piloted handling qualities experiments (either flight or simulated) is described. The Hyperlinked Overview of Piloted Evaluations (HOPE) web application is based on an open-source object-oriented Web-based front end (Ruby-on-Rails) that can be used with a variety of back-end relational database engines. The hyperlinked, on-line data book approach allows an easily-traversed way of looking at a variety of collected data, including pilot ratings, pilot information, vehicle and configuration characteristics, test maneuvers, and individual flight test cards and repeat runs. It allows for on-line retrieval of pilot comments, both audio and transcribed, as well as time history data retrieval and video playback. Pilot questionnaires are recorded as are pilot biographies. Simple statistics are calculated for each selected group of pilot ratings, allowing multiple ways to aggregate the data set (by pilot, by task, or by vehicle configuration, for example). Any number of per-run or per-task metrics can be captured in the database. The entire run metrics dataset can be downloaded in comma-separated text for further analysis off-line. It is expected that this tool will be made available upon request

  11. On-line multisensor monitoring of yogurt and filmjölk fermentations on production scale.

    Science.gov (United States)

    Navrátil, Marián; Cimander, Christian; Mandenius, Carl-Fredrik

    2004-02-11

    Near-infrared (NIR) spectrometry and electronic nose (EN) data were used for on-line monitoring of yogurt and filmjölk (a Swedish yogurt-like sour milk) fermentations under industrial conditions. The NIR and EN signals were selected by evaluation of principal component analysis loading vectors and further analyzed by studying the variability of the selected principal components. First principal components for the NIR and the EN signals were used for on-line generation of a process trajectory plot visualizing the actual state of fermentation. The NIR signals were also used to set up empirical partial least-squares (PLS) models for prediction of the cultures' pH and titratable acidity (expressed as Thorner degrees, degrees T). By using five or six PLS factors the models yielded acceptable predictions that could be further improved by increasing the number of reliable and precise calibration data. The presented results demonstrate that the fusion of the NIR and EN signals has a potential for rapid on-line monitoring and assessment of process quality of yogurt fermentation.

  12. Sobreasseverações: manobras discursivas em notícias on-line

    Directory of Open Access Journals (Sweden)

    André William Alves de Assis

    2014-11-01

    Full Text Available Neste trabalho, analisamos notícias on-line baseadas em relatos defala. Essas notícias mostram-se ricas em sobreasseverações, conceitoque, de acordo com Maingueneau (2008, implica o destaque feitopelo próprio locutor do texto-fonte. Não raro, no funcionamentomidiático, o lugar de sobreasseverador é imputado a um locutorque não efetuou aquele destaque no texto-fonte. Com o objetivode identificar casos em que uma sobreasseveração é atribuída, àrevelia, a um locutor, e categorizar as manobras discursivas visíveisnas sobreasseverações, analisamos a forma como são relatados doisdebates político-televisivos em sete veículos on-line. Nossos resultadosindicam a existência de dois tipos de manobras discursivas propiciadaspela construção da notícia on-line: o primeiro se evidencia em umprocesso de síntese; o segundo implica diversos graus de alteraçãona (reprodução de sentidos que recenografam os debates políticotelevisivos.

  13. On-line coupling of supercritical fluid extraction and chromatographic techniques.

    Science.gov (United States)

    Sánchez-Camargo, Andrea Del Pilar; Parada-Alfonso, Fabián; Ibáñez, Elena; Cifuentes, Alejandro

    2017-01-01

    This review summarizes and discusses recent advances and applications of on-line supercritical fluid extraction coupled to liquid chromatography, gas chromatography, and supercritical fluid chromatographic techniques. Supercritical fluids, due to their exceptional physical properties, provide unique opportunities not only during the extraction step but also in the separation process. Although supercritical fluid extraction is especially suitable for recovery of non-polar organic compounds, this technique can also be successfully applied to the extraction of polar analytes by the aid of modifiers. Supercritical fluid extraction process can be performed following "off-line" or "on-line" approaches and their main features are contrasted herein. Besides, the parameters affecting the supercritical fluid extraction process are explained and a "decision tree" is for the first time presented in this review work as a guide tool for method development. The general principles (instrumental and methodological) of the different on-line couplings of supercritical fluid extraction with chromatographic techniques are described. Advantages and shortcomings of supercritical fluid extraction as hyphenated technique are discussed. Besides, an update of the most recent applications (from 2005 up to now) of the mentioned couplings is also presented in this review.

  14. Configuration Reusing in On-Line Task Scheduling for Reconfigurable Computing Systems

    Institute of Scientific and Technical Information of China (English)

    Maisam Mansub Bassiri; Hadi Shahriar Shahhoseini

    2011-01-01

    Reconfigurable computing systems can be reconfigured at runtime and support partial reconfigurability which makes us able to execute tasks in a true multitasking manner. To manage such systems at runtime, a reconfigurable operating system is needed. The main part of this operating system is resource management unit which performs on-line scheduling and placement of hardware tasks at runtime. Reconfiguration overhead is an important obstacle that limits the performance of on-line scheduling algorithms in reconfigurable computing systems and increases the overall execution time. Configuration reusing (task reusing) can decrease reconfiguration overhead considerably, particularly in periodic applications or the applications in which the probability of tasks recurrence is high. In this paper, we present a technique called reusing-based scheduling (RBS), for on-line scheduling and placement in which configuration reusing is considered as a main characteristic in order to reduce reconfiguration overhead and decrease total execution time of the tasks. Several experiments have been conducted on the proposed algorithm. Obtained results show considerable improvement in overall execution time of the tasks.

  15. On-line MSPD-SPE-HPLC/FLD analysis of polycyclic aromatic hydrocarbons in bovine tissues.

    Science.gov (United States)

    Gutiérrez-Valencia, Tania M; García de Llasera, Martha P

    2017-05-15

    A fast method was optimized and validated for simultaneous trace determination of four polycyclic aromatic hydrocarbons: benzo[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene and benzo[a]pyrene in bovine tissues. The determination was performed by matrix solid-phase dispersion (MSPD) coupled on-line to solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with fluorescence detection (FLD). The sample was dispersed on C18 silica sorbent and then the on-line MSPD-SPE-HPLC/FLD method was applied. Several parameters were optimized: cleaning and elution sequences applied to the MSPD cartridge, the flow rate and dilution of extract used for SPE loading. The on-line method was validated over a concentration range of 0.1-0.6ngg(-1) obtaining good linearity (r⩾0.998) and precision (RSD)⩽10%. Recovery ranged from 96 to 99% and the limits of detection were 0.012ngg(-1). This methodology was applied to liver samples from unhealthy animals. The results demonstrate that MSDP-SPE-HPLC/FLD method provides reliable, sensitive, accurate and fast data to the food control.

  16. Comparing the happiness effects of real and on-line friends.

    Directory of Open Access Journals (Sweden)

    John F Helliwell

    Full Text Available A recent large Canadian survey permits us to compare face-to-face ('real-life' and on-line social networks as sources of subjective well-being. The sample of 5,000 is drawn randomly from an on-line pool of respondents, a group well placed to have and value on-line friendships. We find three key results. First, the number of real-life friends is positively correlated with subjective well-being (SWB even after controlling for income, demographic variables and personality differences. Doubling the number of friends in real life has an equivalent effect on well-being as a 50% increase in income. Second, the size of online networks is largely uncorrelated with subjective well-being. Third, we find that real-life friends are much more important for people who are single, divorced, separated or widowed than they are for people who are married or living with a partner. Findings from large international surveys (the European Social Surveys 2002-2008 are used to confirm the importance of real-life social networks to SWB; they also indicate a significantly smaller value of social networks to married or partnered couples.

  17. On-line calibration of process instrumentation channels in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hashemian, H.M.; Farmer, J.P. [Analysis and Measurement Services Corp., Knoxville, TN (United States)

    1995-04-01

    An on-line instrumentation monitoring system was developed and validated for use in nuclear power plants. This system continuously monitors the calibration status of instrument channels and determines whether or not they require manual calibrations. This is accomplished by comparing the output of each instrument channel to an estimate of the process it is monitoring. If the deviation of the instrument channel from the process estimate is greater than an allowable limit, then the instrument is said to be {open_quotes}out of calibration{close_quotes} and manual adjustments are made to correct the calibration. The success of the on-line monitoring system depends on the accuracy of the process estimation. The system described in this paper incorporates both simple intercomparison techniques as well as analytical approaches in the form of data-driven empirical modeling to estimate the process. On-line testing of the calibration of process instrumentation channels will reduce the number of manual calibrations currently performed, thereby reducing both costs to utilities and radiation exposure to plant personnel.

  18. On-line re-optimization of prostate IMRT plans for adaptive radiation therapy.

    Science.gov (United States)

    Wu, Q Jackie; Thongphiew, Danthai; Wang, Zhiheng; Mathayomchan, Boonyanit; Chankong, Vira; Yoo, Sua; Lee, W Robert; Yin, Fang-Fang

    2008-02-01

    For intermediate and high risk prostate cancer, both the prostate gland and seminal vesicles are included in the clinical target volume. Internal motion patterns of these two organs vary, presenting a challenge for adaptive treatment. Adaptive techniques such as isocenter repositioning and soft tissue alignment are effective when tumor volumes only exhibit translational shift, while direct re-optimization of the intensity-modulated radiation therapy (IMRT) plan maybe more desirable when extreme deformation or differential positioning changes of the organs occur. Currently, direct re-optimization of the IMRT plan using beamlet (or fluence map) has not been reported. In this study, we report a novel on-line re-optimization technique that can accomplish plan adjustment on-line. Deformable image registration is used to provide position variation information on each voxel along the three dimensions. The original planned dose distribution is used as the 'goal' dose distribution for adaptation and to ensure planning quality. Fluence maps are re-optimized via linear programming, and a plan solution can be achieved within 2 min. The feasibility of this technique is demonstrated with a clinical case with large deformation. Such on-line ART process can be highly valuable with hypo-fractionated prostate IMRT treatment.

  19. A Discrete Event System approach to On-line Testing of digital circuits with measurement limitation

    Directory of Open Access Journals (Sweden)

    P.K. Biswal

    2016-09-01

    Full Text Available In the present era of complex systems like avionics, industrial processes, electronic circuits, etc., on-the-fly or on-line fault detection is becoming necessary to provide uninterrupted services. Measurement limitation based fault detection schemes are applied to a wide range of systems because sensors cannot be deployed in all the locations from which measurements are required. This paper focuses towards On-Line Testing (OLT of faults in digital electronic circuits under measurement limitation using the theory of discrete event systems. Most of the techniques presented in the literature on OLT of digital circuits have emphasized on keeping the scheme non-intrusive, low area overhead, high fault coverage, low detection latency etc. However, minimizing tap points (i.e., measurement limitation of the circuit under test (CUT by the on-line tester was not considered. Minimizing tap points reduces load on the CUT and this reduces the area overhead of the tester. However, reduction in tap points compromises fault coverage and detection latency. This work studies the effect of minimizing tap points on fault coverage, detection latency and area overhead. Results on ISCAS89 benchmark circuits illustrate that measurement limitation have minimal impact on fault coverage and detection latency but reduces the area overhead of the tester. Further, it was also found that for a given detection latency and fault coverage, area overhead of the proposed scheme is lower compared to other similar schemes reported in the literature.

  20. On-line re-optimization of prostate IMRT plans for adaptive radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Q Jackie [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States); Thongphiew, Danthai [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States); Wang, Zhiheng [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States); Mathayomchan, Boonyanit [Department of Electrical Engineering and Computer Science, Case Western Reserve University Cleveland, OH (United States); Chankong, Vira [Department of Electrical Engineering and Computer Science, Case Western Reserve University Cleveland, OH (United States); Yoo, Sua [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States); Lee, W Robert [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States); Yin, Fang-Fang [Department of Radiation Oncology, Duke University Medical Center Durham, NC (United States)

    2008-02-07

    For intermediate and high risk prostate cancer, both the prostate gland and seminal vesicles are included in the clinical target volume. Internal motion patterns of these two organs vary, presenting a challenge for adaptive treatment. Adaptive techniques such as isocenter repositioning and soft tissue alignment are effective when tumor volumes only exhibit translational shift, while direct re-optimization of the intensity-modulated radiation therapy (IMRT) plan maybe more desirable when extreme deformation or differential positioning changes of the organs occur. Currently, direct re-optimization of the IMRT plan using beamlet (or fluence map) has not been reported. In this study, we report a novel on-line re-optimization technique that can accomplish plan adjustment on-line. Deformable image registration is used to provide position variation information on each voxel along the three dimensions. The original planned dose distribution is used as the 'goal' dose distribution for adaptation and to ensure planning quality. Fluence maps are re-optimized via linear programming, and a plan solution can be achieved within 2 min. The feasibility of this technique is demonstrated with a clinical case with large deformation. Such on-line ART process can be highly valuable with hypo-fractionated prostate IMRT treatment.