Spreading, retention and clean-up of oil spills. Final report

Energy Technology Data Exchange (ETDEWEB)

Wilson, Jr, M P

1976-05-01

This study reviews and assesses the technology of oil spill spreading, retention and cleanup and proposes research needs in these areas. Sources of oil spills are analyzed and the difficulty of gathering meaningful statistics is discussed. Barrier technology is reviewed and problem areas analyzed. Natural and forced biodegradation and natural and chemical dispersion of oil spills are considered. Research recommendations are categorized under the following two headings (1) Preventive techniques and (2) Containment, Cleanup and Dispersion.

Facts and features of radionuclide migration in Boom Clay

International Nuclear Information System (INIS)

De Regge, P.; Henrion, P.; Monsecour, M.; Put, M.

1988-01-01

The evolution which took place during ten years of research on the behaviour of radionuclides in Boom Clay is described. Initially, the Boom Clay was regarded as a chemically inert exchanger and the radiochemical research aimed at determining the distribution of cations between the clay and some liquid phases. The observation that Boom Clay deteriorates in contact with air and loses important intrinsic properties formed a major breakthrough in the research and led to a careful examination of the real in-situ conditions. Efforts devoted to the understanding of the chemical factors pertaining to the pH, the redox potential, the extent of the buffering capacity of FeS 2 and CaCO 3 in equilibrium with the interstitial aqueous phase are reviewed. Also emerging from the overall picture was the role of the organic material present in the Boom Clay. In contrast to the water percolating fractured formations which may not be in equilibrium with the rock, the interstitial aqueous phase is completely in equilibrium with Boom Clay mainly because of its low permeability and the large excesses of buffering components. As the retention mechanisms are better understood, a more coherent picture is obtained from distribution and diffusion experiments and the effects of consolidation are being investigated in detail. 23 refs.; 4 figs.; 3 tabs

Drilling Down: An Examination of the Boom-Crime Relationship in Resource Based Boom Counties

Directory of Open Access Journals (Sweden)

Rick Ruddell

2017-03-01

Full Text Available Objective to examine the boomcrime relationship in resourcebased boom counties and to propose socioeconomic and legal measures to reduce the boomtown effect. Methods dialectical approach to cognition of social phenomena allowing to analyze them in historical development and functioning in the context of the totality of objective and subjective factors that determined the choice of the following research methods formallogical comparativelegal survey interview focus groups generalized least squares method. Results The expansion in natural resource development in rural communities has led to a number of social problems in these places. The media community stakeholders as well as law enforcement and human service personnel have reported that the rapid growth in these communities leads to increased crime and other social ills. In order to better understand the boomcrime relationship index crimes in oil and natural gas producing counties in Montana and North Dakota were examined. Comparison of 2012 crime rates in a matched sample of counties revealed that crime rates were higher in oilimpacted counties. A prepost analysis found that violent crime in boom counties increased 18.5 between 2006 and 2012 while decreasing 25.6 in a matched sample of counties that had no oil or gas production. Inconsistent with the media portrayal of these communities as a new quotwild westquot we did not find a significant association between oil or natural gas production and property or violent crime in a series of OLS regression models. Scientific novelty for the first time the article uses index crimes in oil and natural gas producing counties in Montana and North Dakota to reveal the association between the rapid growth of towns and the crime rates. Practical significance the main provisions and conclusions of the article can be used in research and educational activity as well as for predicting the socialeconomic development of boomtowns.

Booming Sand Dunes

Science.gov (United States)

Vriend, Nathalie

"Booming" sand dunes are able to produce low-frequency sound that resembles a pure note from a music instrument. The sound has a dominant audible frequency (70-105 Hz) and several higher harmonics and may be heard from far distances away. A natural or induced avalanche from a slip face of the booming dune triggers the emission that may last for several minutes. There are various references in travel literature to the phenomenon, but to date no scientific explanation covered all field observations. This thesis introduces a new physical model that describes the phenomenon of booming dunes. The waveguide model explains the selection of the booming frequency and the amplification of the sound in terms of constructive interference in a confined geometry. The frequency of the booming is a direct function of the dimensions and velocities in the waveguide. The higher harmonics are related to the higher modes of propagation in the waveguide. The experimental validation includes quantitative field research at the booming dunes of the Mojave Desert and Death Valley National Park. Microphone and geophone recordings of the acoustic and seismic emission show a variation of booming frequency in space and time. The analysis of the sensor data quantifies wave propagation characteristics such as speed, dispersion, and nonlinear effects and allows the distinction between the source mechanism of the booming and the booming itself. The migration of sand dunes results from a complicated interplay between dune building, wind regime, and precipitation. The morphological and morphodynamical characteristics of two field locations are analyzed with various geophysical techniques. Ground-penetrating radar images the subsurface structure of the dunes and reveal a natural, internal layering that is directly related to the history of dune migration. The seismic velocity increases abruptly with depth and gradually increases with downhill position due to compaction. Sand sampling shows local

Dual-chamber inflatable oil boom

International Nuclear Information System (INIS)

Blair, R.M.; Tedeschi, E.T.

1993-01-01

An elongated floating material containment boom section is described having a normally vertical ballasted skirt depending from flotation means, and convertible from a flattened collapsed condition to a deployable condition wherein buoyancy chamber means extending along the upper edge of said skirt are inflated to expanded buoyant configuration, including: a gas-impervious sleeve extending along the upper edge of said normally vertical skirt forming a first outer collapsible and inflatable flotation chamber, a first inflation valve connecting the interior of said sleeve with the ambient atmosphere, through which gas under pressure may be introduced into said sleeve to inflate said first buoyant outer flotation chamber, elongated gas-impervious tube means positioned inside said outer flotation chamber and forming second collapsible and inflatable internal flotation bladder chamber means, second inflation valve means connecting the interior of said bladder means through said outer flotation chamber to the ambient atmosphere through which gas under pressure may be introduced into said bladder means to inflate it forming said second flotation chamber means inside said outer flotation chamber

X-Boom, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The proposed X-Boom is an innovation on rollable boom design directly relevant to NASA SBIR topic H5.01, Deployable Structures. The X-boom is a rollable Carbon Fiber...

A second hydrocarbon boom threatens the Peruvian Amazon: trends, projections, and policy implications

Energy Technology Data Exchange (ETDEWEB)

Finer, Matt [Save America' s Forests, 4 Library Court NW, Washington, DC 20003 (United States); Orta-Martinez, Marti, E-mail: matt@saveamericasforests.or, E-mail: martiorta@gmail.co [Institut de Ciencia i Tecnologia Ambiental, Universitat Autonoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain)

2010-01-15

The Peruvian Amazon is home to extraordinary biological and cultural diversity, and vast swaths of this mega-diverse region remain largely intact. Recent analysis indicates, however, that the rapid proliferation of oil and gas exploration zones now threatens the region's biodiversity, indigenous peoples, and wilderness areas. To better elucidate this dynamic situation, we analyzed official Peruvian government hydrocarbon information and generated a quantitative analysis of the past, present, and future of oil and gas activities in the Peruvian Amazon. We document an extensive hydrocarbon history for the region-over 104 000 km of seismic lines and 679 exploratory and production wells-highlighted by a major exploration boom in the early 1970s. We show that an unprecedented 48.6% of the Peruvian Amazon has been recently covered by oil and gas concessions, up from just 7.1% in 2003. These oil and gas concessions overlap 17.1% of the Peruvian Amazon protected area system and over half of all titled indigenous lands. Moreover, we found that up to 72% of the Peruvian Amazon has been zoned for hydrocarbon activities (concessions plus technical evaluation agreements and proposed concessions) in the past two years, and over 84% at some point during the past 40 years. We project that the recent rapid proliferation of hydrocarbon zones will lead to a second exploration boom, characterized by over 20 000 km of new seismic testing and construction of over 180 new exploratory wells in remote, intact, and sensitive forest areas. As the Peruvian Amazon oil frontier rapidly expands, we conclude that a rigorous policy debate is urgently needed in order to avoid the major environmental impacts associated with the first exploration boom of the 1970s and to minimize the social conflict that recently led to deadly encounters between indigenous protesters and government forces.

A second hydrocarbon boom threatens the Peruvian Amazon: trends, projections, and policy implications

International Nuclear Information System (INIS)

Finer, Matt; Orta-Martinez, Marti

2010-01-01

The Peruvian Amazon is home to extraordinary biological and cultural diversity, and vast swaths of this mega-diverse region remain largely intact. Recent analysis indicates, however, that the rapid proliferation of oil and gas exploration zones now threatens the region's biodiversity, indigenous peoples, and wilderness areas. To better elucidate this dynamic situation, we analyzed official Peruvian government hydrocarbon information and generated a quantitative analysis of the past, present, and future of oil and gas activities in the Peruvian Amazon. We document an extensive hydrocarbon history for the region-over 104 000 km of seismic lines and 679 exploratory and production wells-highlighted by a major exploration boom in the early 1970s. We show that an unprecedented 48.6% of the Peruvian Amazon has been recently covered by oil and gas concessions, up from just 7.1% in 2003. These oil and gas concessions overlap 17.1% of the Peruvian Amazon protected area system and over half of all titled indigenous lands. Moreover, we found that up to 72% of the Peruvian Amazon has been zoned for hydrocarbon activities (concessions plus technical evaluation agreements and proposed concessions) in the past two years, and over 84% at some point during the past 40 years. We project that the recent rapid proliferation of hydrocarbon zones will lead to a second exploration boom, characterized by over 20 000 km of new seismic testing and construction of over 180 new exploratory wells in remote, intact, and sensitive forest areas. As the Peruvian Amazon oil frontier rapidly expands, we conclude that a rigorous policy debate is urgently needed in order to avoid the major environmental impacts associated with the first exploration boom of the 1970s and to minimize the social conflict that recently led to deadly encounters between indigenous protesters and government forces.

Oil-based compositions as saliva substitutes: A pilot study to investigate in-mouth retention.

Science.gov (United States)

Hanning, Sara M; Medlicott, Natalie J

2016-03-30

This pilot study aimed to compare the in-mouth retention of an oil-based saliva substitute (emulsion, consisting of rice bran oil, soy lecithin and water) with water and a 1% w/v methylcellulose suspension (polymer) in healthy volunteers. Each formulation was tagged with 1 mmol/L lithium and participants (n=30) rinsed their mouth with one randomly assigned formulation (emulsion, polymer or water) for 30s, before expectorating into a cup. Concentration of lithium expectorated was measured and amount of each formulation remaining in the mouth was estimated. Patient acceptability was investigated using questionnaires, and Fourier-Transform Infrared spectroscopy (FTIR) was used to determine the presence of oil in expectorated samples. Immediately after rinsing, taste was rated lower in the emulsion group compared to the polymer or water groups (p>0.05), although variability was high. Mean retention was highest in the emulsion group, with a difference of 8.34 ± 2.71% (p=0.003) and 4.57 ± 2.71% (p=0.06) compared with the water and polymer groups, respectively. FTIR confirmed the presence of oil in all expectorated emulsion samples. The emulsion was not inferior to the polymer in terms of retention immediately after rinsing. The next step is to conduct larger clinical studies over longer time periods in participants with salivary hypofunction. Copyright © 2016 Elsevier B.V. All rights reserved.

The asymmetric relationship between oil revenues and economic activities: The case of oil-exporting countries

International Nuclear Information System (INIS)

Mehrara, Mohsen

2008-01-01

This paper examines the nonlinear or asymmetric relationship between oil revenues and output growth in oil-exporting countries, applying a dynamic panel framework and two different measures of oil shocks. The main results in this paper confirm the stylized facts that in heavily oil-dependent countries lacking the institutional mechanisms de-linking fiscal expenditure from current revenue, oil revenue shocks tend to affect the output in asymmetric and nonlinear ways. The findings suggest that output growth is adversely affected by the negative oil shocks, while oil booms or the positive oil shocks play a limited role in stimulating economic growth. The findings have practical policy implications for decision makers in the area of macroeconomic planning. The use of stabilization and savings funds and diversification of the real sector seems crucial to minimize the harmful effects of oil booms and busts

A new concept for improved oil spill containment in open waters

International Nuclear Information System (INIS)

Sethness, E.D. Jr.

1990-01-01

In this paper a new concept for improved oil spill containment in open waters is presented. The proposed system is a combination oil boom and wave barrier. Waveguard International has taken its extensive experience as a designer of floating breakwaters and applied this knowledge into the design of a readily transportable, readily deployable floating oil boom with integrated wave attenuation capabilities as well. The new concept is based on the attenuation of the two major natural causes of oil spill dispersion; first, horizontal dispersion caused by wind shear effects; and second, vertical entrainment into the water column caused by the mixing action of wave motion. The physical encirclement of an oil spill with a floating boom to contain horizontal dispersion is not a new concept. Existing systems, however, work best in calm water and rapidly loose efficiency as waves increase. The proposed system can not only physically surround the spill area, but is as much as 90% effective in stopping the transmission of wave energy. The oil boom thus minimizes vertical mixing of the contained oil slick

Dutch Disease in a small open economy: The case of oil in Saudi Arabia

International Nuclear Information System (INIS)

Al-Mabrouk, S.A.

1991-01-01

The effects of 'Dutch Disease' come through two channels: real wage rate and real exchange rate. A sector export boom induces both resource movement and spending effects that reinforce each other in raising higher real wage and real exchange rates. In the case of an oil boom, only the spending effect is in operation because the oil sector does not employ domestic mobile factors. After a great deal of theoretical surveying and consolidation of 'Dutch Disease' on the Saudi Arabian economy throughout the period of 1970s and 1980s. The author was trying to see whether or not the oil boom was an obstacle to economic diversification. The empirical findings support the theoretical prediction. The real exchange rate of Saudi Arabia has appreciated throughout the period of the oil-boom and, in turn, it induced an expansion in the non-traded sector and a contraction in the non-oil traded sector. The indirect effect of the oil boom came through the use of oil wealth to import technology. This effect induced further expansion in the non-traded goods at a faster rate than the non-oil traded goods

The oil boom in Equatorial Guinea

International Nuclear Information System (INIS)

Frynas, J.G.

2004-01-01

In less than a decade, Equatorial Guinea has transformed itself from an African backwater into one of the world's fastest growing economies and a sought-after political partner in the Gulf of Guinea. The sole reason for this transformation has been the discovery of oil and gas. This article outlines the rise of Equatorial Guinea as one of Africa's leading oil-producing countries and investigates the political, economic and social effects of becoming a petro-state. The article is based on the author's field research in Equatorial Guinea in the autumn of 2003 and interviews with senior oil company staff, government officials and staff of international organizations as well as secondary sources. This research demonstrates how reliance on oil and gas exports can lead to profound changes in a country's political economy. (author)

Realism Assessment of Sonic Boom Simulators

Science.gov (United States)

Sullivan, Brenda M.; Davies, Patrica; Hodgdon, Kthleen K.; Salamone, Joseph A., III; Pilon, Anthony

2008-01-01

Developments in small supersonic aircraft design are predicted to result in low-intensity sonic booms. Booms generated by current aircraft are similar to those that led to the ban on commercial supersonic fli ght over the US, so are unsuitable for parametric studies of psychoac oustic response to low-intensity booms. Therefore, simulators have be en used to study the impact of predicted low-intensity sonic booms. H owever, simulators have been criticized because, when simulating conv entional-level booms, the sounds were observed to be unrealistic by p eople experienced in listening to sonic booms. Thus, two studies were conducted to measure the perceived realism of three sonic boom simul ators. Experienced listeners rated the realism of conventional sonic boom signatures when played in these simulators. The effects on percei ved realism of factors such as duration of post-boom noise, exclusion of very low frequency components, inclusion of ground reflections, a nd type of simulator were examined. Duration of post-boom noise was f ound to have a strong effect on perceived realism, while type of simu lator had a weak effect. It was determined that post-boom noise had t o be at least 1.5 seconds long for the sound to be rated very realist ic. Loudness level did not affect realism for the range of sounds pla yed in the tests (80-93 dB ASEL).

Small-scale in-situ burn tests to develop operational proficiencies

International Nuclear Information System (INIS)

McCarthy, M.W.

1996-01-01

A small-scale hands-on in-situ burning experiment was conducted to prepare members of a response community in the event of an actual full scale in-situ burn. Two different styles of fire booms were deployed in open water and exposed to multiple test tank burns. Residual burned crude oil was recovered and the booms decontaminated. The experiments showed that all the methods used to gauge the depth of oil contained in the booms created an element of doubt in their accuracy. The main lessons learned pertained to pre-combustion volume estimation, oil slick ignition, and residue recovery. It was concluded that in-situ burning was a potential technique in oil spill response, but some refinement is still needed to be done with the oil retention booms. The operational costs associated with the experiment were minimal, given the nature of the project. 1 tab

Thermo-hydro-mechanical behaviour of Boom clay; Comportement thermo-hydro-mecanique de l'argile de Boom

Energy Technology Data Exchange (ETDEWEB)

Le, T.T

2008-01-15

This thesis studied the thermo-hydro-mechanical properties of Boom clay, which was chosen to be the host material for the radioactive waste disposal in Mol, Belgium. Firstly, the research was concentrated on the soil water retention properties and the hydro-mechanical coupling by carrying out axial compression tests with suction monitoring. The results obtained permitted elaborating a rational experimental procedure for triaxial tests. Secondly, the systems for high pressure triaxial test at controlled temperature were developed to carry out compression, heating, and shearing tests at different temperatures. The obtained results showed clear visco-elasto-plastic behaviour of the soil. This behaviour was modelled by extending the thermo-elasto-plastic model of Cui et al. (2000) to creep effect. (author)

Sleipner mishap jolts booming Norway

International Nuclear Information System (INIS)

Anon.

1991-01-01

This paper reports on Norway's buoyant offshore industry that was stunned when the concrete substructure for Sleipner natural gas field's main production platform sank in the Grandsfjord off Stavanger late last month. The accident, a blow to Norway's gas sales program in Europe, came with offshore activity in the Norwegian North Sea moving into a new boom period. Currently, 10 oil and gas fields are under development, and several projects are on the drawing board. Aker Oil and Gas, a leading offshore firm, says the country's construction industry will be working at capacity for the next 4 years. Norwegian oil production has been hovering just below 2 million b/d since the beginning of this year, making Norway the North Sea's largest producer, a position formerly held by the U.K. Gas production averages about 3 bcfd. With European gas demand sharply increasing, Norway is under pressure to increase output from new fields in the mid to late 1990s. The Sleipner setback forces state owned Den norske stats oljeselskap AS (Statoil) to cast around for supplies. Sleipner was to have begun deliveries to a consortium of continental gas companies in October 1993. Statoil believes it can fill the gap from existing fields in Norwegian waters

Contingency plans and successful response strategies for oil spills into rivers

Energy Technology Data Exchange (ETDEWEB)

Owens, Edward H. [Polaris Applied Sciences Inc., Bainbridge Island, WA (United States)]. E-mail: ehowens@polarisappliedsciences.com

2003-07-01

Oil spilled into a river enters a dynamic environment. An effective response can only succeed if the dynamics of the river system are understood and if the strategies and tactics are designed to match these conditions. Oil is transported downstream at the speed of the current, therefore, an estimate of the rate of movement is essential to identify effective intercept locations. Boom performance is affected by local surface water velocities as entrainment of oil typically begins when velocities exceed 0.4 m/s. However, boom configurations can be effective in current velocities as great as 2.5 m/s. Response operations can be successful if staging or control locations have been identified as part of contingency planning and if booms are deployed to take into account local surface current characteristics. Tracking and control of submerged or sunken oil is difficult and may not be practical. Recovery operations for sunken oil depend on the channel depth, current velocities, and on the distribution and concentration of the oil. (author)

The Newfoundland oil spill burn experiment

International Nuclear Information System (INIS)

Fingas, M.

1992-01-01

A major offshore oil-spill combustion experiment is being planned for waters off Newfoundland. The experiment is designed to answer outstanding questions on the acceptability of in-situ oil spill burning. In the experiment, variables will be controlled to allow quantitative measurement of the scientific and operational parameters that will enhance understanding of in-situ combustion as an operational oil-spill response technique. The proposed full-scale tests follow six years of testing in laboratory tanks. Analyses have shown that the high temperatures reached during efficient in-situ combustion result in relatively complete destruction of the oil. Tests have shown that the most important factor in this regard is that the oil must be thickened sufficiently before effective burning will occur. Such thickening is potentially possible in the offshore, under suitable wind and sea conditions, using fireproof containment booms. The experiment will involve measurement of emissions to the air, levels of oil in water, and operational parameters of in-situ burning. Time and location of the experiment are chosen to minimize ecological damage and for operational reasons. When suitable conditions are present in early August 1993, two 45-m 3 batches of crude oil will be released into a containment boom and ignited. The burn residue will be recovered mechanically, and a secondary containment and recovery system will be towed behind the fireproof boom to pick up any fugitive oil or residue. 3 figs., 6 tabs

Oil sorption and retention capacities of thermally-bonded hybrid nonwovens prepared from cotton, kapok, milkweed and polypropylene fibers.

Science.gov (United States)

Thilagavathi, G; Praba Karan, C; Das, Dipayan

2018-08-01

This work reports on a series of thermally-bonded, hybrid and oil-sorbent nonwovens developed from binary and tertiary mixing of cotton, kapok, and three varieties of milkweed fibers (Asclepias Syriaca, Calotropis Procera and Calotropis Gigantea) and polypropylene fibers. The physical and chemical properties of the fibers were investigated to examine their oleophilic character. It was observed that all the fiber surfaces were covered with natural wax. Further, kapok and milkweed fibers were found to have less cell wall thickness and high void ratio. Oil sorption and retention characteristics of these fibers were studied in loose fibrous form as well as in structured assembly form (thermally-bonded nonwovens) using high density oil and diesel oil. The effects of fiber diameter, fiber cross-sectional shape, fiber surface area and porosity on the oil sorption behavior were discussed. An excellent and a selective oil sorption behavior of milkweed fibers (Calotropis Procera and Calotropis Gigantea) blended with cotton and polypropylene fibers were observed. The maximum oil sorption capacity of the developed thermal bonded nonwoven was 40.16 g/g for high density (HD) oil and 23.00 g/g for diesel oil. Further, a high porosity combined with high surface area played a major role in deciding the oil sorption and retention characteristics. Copyright © 2018 Elsevier Ltd. All rights reserved.

OIL BOND®

Science.gov (United States)

Technical product bulletin: this miscellaneous oil spill control agent is a solidifier used in cleanups. It absorbs and solidifies hydrocarbon spills on freshwater and saltwater or land applications. Ring spill with booms or pillows before treatment.

High-Quality Seismic Observations of Sonic Booms

Science.gov (United States)

Wurman, Gilead; Haering, Edward A., Jr.; Price, Michael J.

2011-01-01

The SonicBREWS project (Sonic Boom Resistant Earthquake Warning Systems) is a collaborative effort between Seismic Warning Systems, Inc. and NASA Dryden Flight Research Center. This project aims to evaluate the effects of sonic booms on Earthquake Warning Systems in order to prevent such systems from experiencing false alarms due to sonic booms. The airspace above the Antelope Valley, California includes the High Altitude Supersonic Corridor and the Black Mountain Supersonic Corridor. These corridors are among the few places in the US where supersonic flight is permitted, and sonic booms are commonplace in the Antelope Valley. One result of this project is a rich dataset of high-quality accelerometer records of sonic booms which can shed light on the interaction between these atmospheric phenomena and the solid earth. Nearly 100 sonic booms were recorded with low-noise triaxial MEMS accelerometers recording 1000 samples per second. The sonic booms had peak overpressures ranging up to approximately 10 psf and were recorded in three flight series in 2010 and 2011. Each boom was recorded with up to four accelerometers in various array configurations up to 100 meter baseline lengths, both in the built environment and the free field. All sonic booms were also recorded by nearby microphones. We present the results of the project in terms of the potential for sonic-boom-induced false alarms in Earthquake Warning Systems, and highlight some of the interesting features of the dataset.

Dynamic Analysis of The Intelligent Sprayer Boom

DEFF Research Database (Denmark)

Wiggers, Sine Leergaard; Maagaard, Jørgen; Terp, Christian Istjord

called “The intelligent sprayer boom”. For the sprayer boom the primary challenge is to hit the weeds with precision from a movable platform. Since the sprayer boom is mounted on a tractor the system will react to bumps in the field. The intelligent sprayer boom has an integrated camera technology......As part of the 3 year project “The intelligent Sprayer Boom”, financed by The Danish National Advanced Technology Foundation, the dynamics of the sprayer boom is to be analysed. In order to minimize the amount of herbicides used to kill the weeds in agriculture a new sprayer boom is being developed...

Decrease of oil prices: economic boom, ecologic challenge

International Nuclear Information System (INIS)

Saussay, Aurelien; Guillou, Antoine; Boissel, Charles

2015-01-01

After having outlined how oil price collapse changes the economic deal, the authors analyse the determining factors of this collapse: slowing demand, exceeding supply, financialization of oil markets, no decision of reduction of production by the OPEC, decision by major companies to postpone investments rather than to re-balance short-term supply, production adjustment related to shale oil production. The second part analyses and discusses the economic consequences of oil price collapse: immediate impact on the French economy (reduction of the energy bill, different effects on the different economic actors, main related risks), economic scenarios on a medium term (contribution of models of macro-economic balance, possible economic growth of 0.4 due to oil price reduction, uncertain behaviour of economic actors, risk of deflation). In the third part, the authors make some proposals aimed at adapting the economy in order to take advantage of oil price reduction: to support energy transition with a required reform of energy taxing (for example for automotive fuels), to invest associated savings in energy transition and in transport infrastructure, to help households and companies in their energy transition

Recent Progress on Sonic Boom Research at NASA

Science.gov (United States)

Loubeau, Alexandra

2012-01-01

Sonic boom research conducted at NASA through the Supersonics Project of the Fundamental Aeronautics Program is oriented toward understanding the potential impact of sonic boom noise on communities from new low-boom supersonic aircraft designs. Encompassing research in atmospheric propagation, structural response, and human response, NASA research contributes to knowledge in key areas needed to support development of a new noise-based standard for supersonic aircraft certification. Partnerships with several industry, government, and academic institutions have enabled the recent execution of several acoustic field studies on sonic booms. An overview of recent activities funded by NASA includes: focus boom model development and experimental validation, field experiments of structural transmission of sonic booms into large buildings, and low boom community response testing.

Contained controlled burning of spilled oil during the Exxon Valdez oil spill

International Nuclear Information System (INIS)

Allen, A.A.

1990-01-01

During the evening of the second day following the Exxon Valdez oil spill, an estimated 57,000-114,000 liters of North Slope crude oil were eliminated using in-situ combustion. The oil was collected with 3M's Fire Boom towed in a U-shaped configuration behind two fishing boats. Working with 152 m long tow lines, a 137 m boom was moved at ca 0.26-5.2 m/s through slightly emulsified oil patches in the downwind region of the spill. A gelled fuel ignitor was used to ignite the captured oil, and the size and intensity of the blaze was controlled by adjusting the speed of the vessels. Total burn time was ca 1.25 h, however the intense part of the burn lasted for ca 45 minutes. Using several methods to estimate the total volume of oil collected, the volume resulted in ca 1136 liters of stiff, taffy-like burn residue that could be picked up easily on completion of the burn. The controlled burn thus resulted in an estimated 98% or better elimination of crude oil. It had been planned to use a helitorch to ignite the captured oil, however darkness required the use of the gelled ignitor. Had the helitorch been used, numerous ignition points could have been spread througout the contained oil, providing a much more efficient heating and ultimate ignition of the oil. 5 figs

Improving Oil Recovery (IOR) with Polymer Flooding in a Heavy-Oil River-Channel Sandstone Reservoir

OpenAIRE

Lu, Hongjiang

2009-01-01

Most of the old oil fields in China have reached high water cut stage, in order to meet the booming energy demanding, oil production rate must be kept in the near future with corresponding IOR (Improving Oil Recovery) methods. Z106 oilfield lies in Shengli Oilfields Area at the Yellow River delta. It was put into development in 1988. Since the oil belongs to heavy oil, the oil-water mobility ratio is so unfavourable that water cut increases very quickly. Especially for reservoir Ng21, the san...

China expands refining sector to handle booming oil demand

International Nuclear Information System (INIS)

Anon.

1993-01-01

China's refining sector is in the midst of a major expansion and reorganization in response to booming domestic demand for petroleum products. Plans call for hiking crude processing capacity to 3.9 million b/d in 1995 from the current 3.085 million b/d. Much of that 26% increase will come where the products demand growth is the strongest: China's coastal provinces, notably those in the southeast. Despite the demand surge, China's refineries operated at only 74% of capacity in 1991, and projections for 1992 weren't much better. Domestic crude supply is limited because of Beijing's insistence on maintaining crude export levels, a major source of hard currency foreign exchange. The paper discusses the superheated demand; exports and imports; the refining infrastructure; the Shenzhen refinery; Hong Kong demand; southeast coast demand; 1993 plans; and foreign investment

Swarm Deployable Boom Assembly (DBA) Development of a Deployable Magnetometer Boom for the Swarm Spacecraft

Science.gov (United States)

McMahon, Paul; Jung, Hans-Juergen; Edwards, Jeff

2013-09-01

The Swarm programme consists of 3 magnetically clean satellites flying in close formation designed to measure the Earth's magnetic field using 2 Magnetometers mounted on a 4.3m long deployable boom.Deployment is initiated by releasing 3 HDRMs, once released the boom oscillates back and forth on a pair of pivots, similar to a restaurant kitchen door hinge, for around 120 seconds before coming to rest on 3 kinematic mounts which are used to provide an accurate reference location in the deployed position. Motion of the boom is damped through a combination of friction, spring hysteresis and flexing of the 120+ cables crossing the hinge. Considerable development work and accurate numerical modelling of the hinge motion was required to predict performance across a wide temperature range and ensure that during the 1st overshoot the boom did not damage itself, the harness or the spacecraft.Due to the magnetic cleanliness requirements of the spacecraft no magnetic materials could be used in the design of the hardware.

A natural ice boom

Energy Technology Data Exchange (ETDEWEB)

Hopper, H.R. [Manitoba Hydro, Winnipeg, MB (Canada)

1998-10-01

Planning for ice jams and ice movements are critical on the Nelson River in northern Manitoba in designing cofferdams. Experience on the St. Lawrence River demonstrated the possibility of exercising some control over ice action by judicious placement of log booms or ice control structures. The success of experiments with man-made controls led to field tests in which an ice sheet of sufficient magnitude and competence was introduced into the open water stream of the Nelson River. The ice sheet was subsequently jammed in a narrow channel, thereby creating a natural ice bridge or boom upstream of a proposed hydro development. Under favourable conditions, this boom would initiate the progression of the ice cover from its location upstream, cutting off the downstream reach from the ice producing potential of the upstream reach. Although ice would still be generated downstream, the length of the reach between the ice boom and the development site would be short enough that ice jamming at the development site would never occur. Although problems in blasting prevented the introduction of a competent ice sheet into the main stream of the river at the location chosen, sufficient confidence in the theory was gained to warrant further consideration. 4 refs., 1 tab., 10 figs.

Domestic Crop Booms, Livelihood Pathways and Nested Transitions: Charting the Implications of Bangladesh’s Pangasius Boom

NARCIS (Netherlands)

Belton, B.; Asseldonk, van I.J.M.; Bush, S.R.

2017-01-01

Rapidly transforming Asian food systems are oriented largely towards domestic markets, yet literature on Asian crop booms deals almost exclusively with commodities produced for export. With reference to pangasius aquaculture in Bangladesh, we argue that ‘domestic crop booms’ - agricultural booms

Waveforms and Sonic Boom Perception and Response (WSPR): Low-Boom Community Response Program Pilot Test Design, Execution, and Analysis

Science.gov (United States)

Page, Juliet A.; Hodgdon, Kathleen K.; Krecker, Peg; Cowart, Robbie; Hobbs, Chris; Wilmer, Clif; Koening, Carrie; Holmes, Theresa; Gaugler, Trent; Shumway, Durland L.;

The U.S. Oil and Gas Boom

International Nuclear Information System (INIS)

Brodman, John

2012-01-01

A funny thing happened in the last few years when no one was paying attention. What is going on is nothing short of a revolution in U.S., Lower-48 oil and natural gas production that is quickly transforming the energy sector. This transformation, while important for the oil market, is likely to be spectacularly more evolutionary in natural gas markets, both here and abroad. New production technologies have arrived at a time when the whole world is looking for cleaner-burning fuels, and they may usher in a new golden era for natural gas as a bridge fuel to a cleaner, more-sustainable energy future

Floating Oil-Spill Containment Device

Science.gov (United States)

Jones, Jack A.

2012-01-01

Previous oil containment booms have an open top that allows natural gas to escape, and have significant oil leakage due to wave action. Also, a subsea pyramid oil trap exists, but cannot move relative to moving oil plumes from deepsea oil leaks. The solution is to have large, moveable oil traps. One version floats on the sea surface and has a flexible tarp cover and a lower weighted skirt to completely entrap the floating oil and natural gas. The device must have at least three sides with boats pulling at each apex, and sonar or other system to track the slowly moving oil plume, so that the boats can properly locate the booms. The oil trap device must also have a means for removal of the oil and the natural gas. A second design version has a flexible pyramid cover that is attached by lines to ballast on the ocean floor. This is similar to fixed, metal pyramid oil capture devices in the Santa Barbara Channel off the coast of California. The ballast lines for the improved design, however, would have winches that can move the pyramid to always be located above the oil and gas plume. A third design is a combination of the first two. It uses a submerged pyramid to trap oil, but has no anchor and uses boats to locate the trap. It has ballast weights located along the bottom of the tarp and/or at the corners of the trap. The improved floating oil-spill containment device has a large floating boom and weighted skirt surrounding the oil and gas entrapment area. The device is triangular (or more than three sides) and has a flexible tarp cover with a raised gas vent area. Boats pull on the apex of the triangles to maintain tension and to allow the device to move to optimum locations to trap oil and gas. The gas is retrieved from a higher buoyant part of the tarp, and oil is retrieved from the floating oil layer contained in the device. These devices can be operated in relatively severe weather, since waves will break over the devices without causing oil leaking. Also, natural

Oil frontiers and indigenous resistance in the Peruvian Amazon

Energy Technology Data Exchange (ETDEWEB)

Orta-Martinez, Marti [ICTA, Universitat Autonoma de Barcelona, 08193 Barcelona (Spain); Finer, Matt [Save America' s Forests, 4 Library Court. NW, Washington DC 20003 (United States)

2010-12-15

The Peruvian Amazon is culturally and biologically one of the most diverse regions on Earth. Since the 1920s oil exploration and extraction in the region have threatened both biodiversity and indigenous peoples, particularly those living in voluntary isolation. We argue that the phenomenon of peak oil, combined with rising demand and consumption, is now pushing oil extraction into the most remote corners of the world. Modern patterns of production and consumption and high oil prices are forcing a new oil exploratory boom in the Peruvian Amazon. While conflicts spread on indigenous territories, new forms of resistance appear and indigenous political organizations are born and become more powerful. The impacts of oil exploration and exploitation and indigenous resistance throughout the oil history of the Peruvian Amazon are reviewed here, focusing on the Achuar people in Rio Corrientes. The driving forces, impacts, and responses to the current oil exploration boom are analyzed from an environmental justice perspective. We conclude that, in a context of peak oil and growing global demand for oil, such devastating effects for minor quantities of oil are likely to increase and impact other remote parts of the world. (author)

Del Boom y otras onomatopeyas literarias

Directory of Open Access Journals (Sweden)

Jorge Iván Parra Londoño

2016-03-01

Full Text Available Este artículo trata de examinar los alcances literarios del llamado Boom latinoamericano, a medio siglo de su estallido, las cuatro obras más representativas y sus respectivos autores, además de proponer un quinto autor, según la invitación que hiciera en su momento el crítico Ángel Rama. Por otro lado, evalua la respuesta literaria por parte del Post Boom, analizando sus características y su vigencia y, de manera concomitante, los movimientos anejos o posteriores a dicho movimiento, como el Crack y la Generación Granta. A manera de propuesta, se pondrán a consideración treinta autores como integrantes del Post Boom y una novela de Carlos Fuentes como el “crash” del Boom. Por último, presenta un breve vistazo a la narrativa española paralela a los mencionados movimientos.

Influence of olive oil on alveolar bone response during orthodontic retention period: rabbit model study.

Science.gov (United States)

Al-Hamdany, Afrah K; Al-Khatib, Ali R; Al-Sadi, Hafidh I

2017-08-01

This study attempted to evaluate clinically and histologically the effects of olive oil (Ol) consumption on orthodontic relapse after the retention period. Thirty apparently healthy female albino rabbits, weight more than 1000 g each was used in this study. The animals were grouped randomly into six groups of five animals each: two control and four experimental groups. In control groups, the relapse was estimated either at zero day, or at the end of the fourth week after orthodontic retention period. In the experimental groups, the animals' groups received Ol, 7.7, or 15.4 ml/kg b.w. per day during the orthodontic retention period. The relapse was estimated either at zero day, or at the end of the fourth week after orthodontic retention period for each concentration. Modified fixed orthodontic appliances were attached to the rabbits' lower central incisors. Each rabbit received orthodontic intervention for one week, followed by six weeks retention period. At the end of the experiments, the clinical and histological investigations were conducted. Data analyses were performed at the level of p orthodontic retention period, especially at 15.4 ml/kg b.w. per day concentration, clinically reduced orthodontic relapse on rabbit model. Histologically, Ol increased osteoblasts and osteocytes counts and the relative amount of bone mineralization of connective tissue layer forming alveolar bone (AB) at the end of four weeks after the orthodontic retention period.

Oil spill sorbents: Testing protocol and certification listing program

International Nuclear Information System (INIS)

Cooper, D.; Gausemel, I.

1993-01-01

Environment Canada's Emergencies Engineering Division is spearheading a program in conjunction with the Canadian General Standards Board that would see the development of a certification and listing program in addition to a national standard for the testing of sorbent materials. Funding for this program is provided by Environment Canada (EC), Canadian Coast Guard (CCG), Marine Spill Response Corporation (MSRC), US Coast Guard (USCG), and US Minerals Management Service (MMS). The test methods are based upon those defined by the American Society for Testing and Materials and previous test methods developed by Environment Canada for our series of reports entitled Selection Criteria and Laboratory Evaluation of Oil Spill Sorbents. This series, which was started in 1975, encompasses a number of commercially available oil spill sorbents tested with different petroleum products and hydrocarbon solvents. The testing program will categorize the sorbents according to their operating characteristics. The main categories are oil spills on water, oil spills on land, and industrial use. The characteristics to be evaluated with the new test protocols include initial and maximum sorption capacities, water pickup, buoyancy, reuse potential, retention profile, disintegration (material integrity), and ease of application and retrieval. In the near future are plans to incorporate changes to the test that would involve increasing the list of test liquids to encompass spills in an industrial setting, in addition to testing sorbent booms and addressing the disposal problem

The Effect of Sonic Booms on Earthquake Warning Systems

Science.gov (United States)

Wurman, Gilead; Haering, Edward A, Jr.; Price, Michael J.

2011-01-01

Several aerospace companies are designing quiet supersonic business jets for service over the United States. These aircraft have the potential to increase the occurrence of mild sonic booms across the country. This leads to interest among earthquake warning (EQW) developers and the general seismological community in characterizing the effect of sonic booms on seismic sensors in the field, their potential impact on EQW systems, and means of discriminating their signatures from those of earthquakes. The SonicBREWS project (Sonic Boom Resistant Earthquake Warning Systems) is a collaborative effort between Seismic Warning Systems, Inc. (SWS) and NASA Dryden Flight Research Center. This project aims to evaluate the effects of sonic booms on EQW sensors. The study consists of exposing high-sample-rate (1000 sps) triaxial accelerometers to sonic booms with overpressures ranging from 10 to 600 Pa in the free field and the built environment. The accelerometers record the coupling of the sonic boom to the ground and surrounding structures, while microphones record the acoustic wave above ground near the sensor. Sonic booms are broadband signals with more high-frequency content than earthquakes. Even a 1000 sps accelerometer will produce a significantly aliased record. Thus the observed peak ground velocity is strongly dependent on the sampling rate, and increases as the sampling rate is reduced. At 1000 sps we observe ground velocities that exceed those of P-waves from ML 3 earthquakes at local distances, suggesting that sonic booms are not negligible for EQW applications. We present the results of several experiments conducted under SonicBREWS showing the effects of typical-case low amplitude sonic booms and worst-case high amplitude booms. We show the effects of various sensor placements and sensor array geometries. Finally, we suggest possible avenues for discriminating sonic booms from earthquakes for the purposes of EQW.

Retention levels of vegetable extractable beta-carotene preserved in virgin coconut oil and unadulterated honey

Directory of Open Access Journals (Sweden)

Mungai, Z. M.,

2017-06-01

Full Text Available Dark green leafy vegetables such as Amaranthus spp. are known to be good sources of beta-carotene, a pro-vitamin A carotenoid with highly potent antioxidant property. As an antioxidant, beta-carotene scavenges for electron and thus terminates chain reactions, prevents recurrence and formation of unstable oxygen which otherwise initiate a chain reaction leading to such cases as cancer. While beta-carotene is supplied from consuming vegetables to provide vitamin A, it is also given as a supplement in cases of deficiency. However, it is highly degraded in the presence of light, heat, and oxygen posing a challenge to the methods of its preservation. Coconut oil and honey are popularly consumed in many countries facing vitamin A deficiency as good antioxidants and yet their role in preservation is largely unknown. The study reports the retention of beta-carotene extracted from Amaranthus spp. and separately preserved in virgin coconut oil (VCO and unadulterated honey for up to six months. HPLC and DPPH assay were used to determine beta-carotene and antioxidant activity respectively. Virgin coconut oil and honey had significantly different (p<0.001 antioxidant activities of 65.12±0.70 and 81.51±1.39 % radical scavenging activity respectively that compared well with those of BHT and ascorbic acid. The concentration of beta-carotene preserved in VCO and unadulterated honey degraded by 90%, though the final retention provided higher than the recommended daily allowance of retinol (0.216±0.001 and 0.312±0.003 retinol activity equivalent respectively when 100 mg is consumed. Virgin coconut oil and unadulterated honey can preserve beta-carotene if high amounts are used.

Studying the migration behaviour of radionuclides in boom clay by electromigration

Energy Technology Data Exchange (ETDEWEB)

Norbert Maes, H.; Moors, H.; Dierckx, A.; Aertsens, M.; Wang, L.; Canniere, P. de; Put, M. [SCK-CEN, Belgian Nuclear Research Centre, Waste and Disposal - R and D Geological Disposal Mol (Belgium)

2001-07-01

Migration studies are an important part in the assessment of the performance of the Boom Clay Formation as a candidate for geological disposal of High-Level radwaste in Belgium. However, classical diffusion experiments take a long time because of the excellent retention characteristics of the Boom Clay. Electrical fields can be used to move ionic species. Especially for low permeability soils/sediments (such as clays), this driving force is far more efficient than a hydraulic gradient. As a consequence, the experimental time can be reduced drastically. This paper gives an overview on the quantitative and qualitative use of electromigration as a powerful technique to study radionuclides migration in clays. The enormous time gain in the determination of migration parameters for strongly retarded radionuclides as {sup 137}Cs{sup +} and {sup 226}Ra{sup 2+} is first demonstrated. Secondly, we want to demonstrate that electromigration has some useful features to study the behaviour of radionuclides with a more complex chemistry like the redox sensitive element uranium and Am-Organic Matter (OM) complexes. In the case of uranium, electromigration provides information on the speciation of the migrating species while for the Am-organic Matter complexes the role of OM as a possible carrier of actinides is investigated. (orig.)

Studying the migration behaviour of radionuclides in boom clay by electromigration

International Nuclear Information System (INIS)

Norbert Maes, H.; Moors, H.; Dierckx, A.; Aertsens, M.; Wang, L.; Canniere, P. de; Put, M.

2001-01-01

Migration studies are an important part in the assessment of the performance of the Boom Clay Formation as a candidate for geological disposal of High-Level radwaste in Belgium. However, classical diffusion experiments take a long time because of the excellent retention characteristics of the Boom Clay. Electrical fields can be used to move ionic species. Especially for low permeability soils/sediments (such as clays), this driving force is far more efficient than a hydraulic gradient. As a consequence, the experimental time can be reduced drastically. This paper gives an overview on the quantitative and qualitative use of electromigration as a powerful technique to study radionuclides migration in clays. The enormous time gain in the determination of migration parameters for strongly retarded radionuclides as 137 Cs + and 226 Ra 2+ is first demonstrated. Secondly, we want to demonstrate that electromigration has some useful features to study the behaviour of radionuclides with a more complex chemistry like the redox sensitive element uranium and Am-Organic Matter (OM) complexes. In the case of uranium, electromigration provides information on the speciation of the migrating species while for the Am-organic Matter complexes the role of OM as a possible carrier of actinides is investigated. (orig.)

Fire-fighting burning oil wells

International Nuclear Information System (INIS)

Newbury, Herbert; Risk, Stewart.

1993-01-01

A method of extinguishing burning oil wells is presented which involves dispensing liquid nitrogen to the burning site to prevent or inhibit oxygen from fuelling the flames. To carry out the method a remotely operated vehicle is described which is provided with a source of liquid nitrogen and an articulated deployment boom capable of supplying the liquid nitrogen to the site of a burning oil well. (Author)

Oxidative stability and alpha-tocopherol retention in soybean oil with lemon seed extract (Citrus limon) under thermoxidation.

Science.gov (United States)

Luzia, Débora Maria Moreno; Jorge, Neuza

2009-11-01

The synergistic effect of lemon seed extract with tert-butylhydroquinone (TBHQ) in soybean oil subjected to thermoxidation by Rancimat was investigated, and the influence of these antioxidants on a-tocopherol degradation in thermoxidized soybean oil. Control, LSE (2400 mg/kg Lemon Seed Extract), TBHQ (50 mg/kg), Mixture 1 (LSE + 50 mg/kg TBHQ) and Mixture 2 (LSE + 25 mg/kg TBHQ) were subjected to 180 degrees C for 20 h. Samples were taken at time 0, 5, 10, 15 and 20 h intervals and analysed for oxidative stability and alpha-tocopherol content. LSE and Mixtures 1 and 2 showed the capacity of retarding lipid oxidation when added to soya oil and also contributed to alpha-tocopherol retention in oil heated at high temperatures. However, Mixtures 1 and 2 added to the oil presented a greater antioxidant power, consequently proving the antioxidants synergistic effect.

Subjective Response to Simulated Sonic Booms in Homes

Science.gov (United States)

McCurdy, David A.; Brown, Sherilyn A.

1996-01-01

One of the environmental issues affecting the development of a second-generation supersonic commercial transport is the impact of sonic booms on people. Aircraft designers are attempting to design the transport to produce sonic boom signatures that will have minimum impact on the public. Current supersonic commercial aircraft produce an 'N-wave' sonic boom pressure signature that is considered unacceptable by the public. This has resulted in first-generation supersonic transports being banned from flying supersonic over land in the United States, a severe economic constraint. By tailoring aircraft volume and lift distributions, designers hope to produce sonic boom signatures having specific shapes other than 'N-wave' that may be more acceptable to the public. As part of the effort to develop a second-generation supersonic commercial transport, Langley Research Center is conducting research to study people's subjective response to sonic booms. As part of that research, a system was developed for performing studies of the subjective response of people to the occurrence of simulated sonic booms in their homes. The In-Home Noise Generation/Response System (IHONORS) provides a degree of situational realism not available in the laboratory and a degree of control over the noise exposure not found in community surveys. The computer-controlled audio system generates the simulated sonic booms, measures the noise levels, and records the subjects' ratings and can be placed and operated in individual homes for extended periods of time. The system was used to conduct an in-home study of subjective response to simulated sonic booms. The primary objective of the study was to determine the effect on annoyance of the number of sonic boom occurrences in a realistic environment. The effects on annoyance of several other parameters were also examined. Initially, data analyses were based on all the data collected. However, further analyser found that test subjects adapted to the sonic

Modeling the macroeconomic impact of oil: Mexico, 1970-1987

International Nuclear Information System (INIS)

Smith Villavicencio, W.J.

1991-01-01

A saddle-point stable-demand-determined model is theoretically developed to understand the impact of changes in oil revenues with emphasis on the financial aspects. The model includes explicitly a balance of payments and a government budget constraint and features credit as the main transmission mechanism between the financial and the real sector. It is shown that some of the consequences usually proposed by the so-called Dutch Disease literature are dependent on conditions of full employment and that they may not hold when this assumption is dropped. It is found that fiscal policy can be effective in ameliorating the disruptive effects of an oil boom on exchange rate expectations and the foreign-exchange market, but that it can also be destabilizing. It is also shown that an oil boom and an oil bust are not necessarily symmetric and they may share similar effects like an initial depreciation of the exchange rate

Oil spill response engineering and planning. Technical completion report

International Nuclear Information System (INIS)

Swift, M.R.; Celikkol, B.; Goodwin, C.E.; Carrier, R.; McDonald, S.P.

1991-12-01

Tanker and barge traffic associated with the five petroleum product terminals along the NH side of the Piscataqua River represents a constant oil spill threat to the contiguous Great Bay System, NH, an estuarine reserve. Several serious accidents have in fact taken place in the 1970's and two small spills in 1990. A major factor is that the Piscataqua channel is subject to high velocity tidal currents. Should a spill occur, problems arise in knowing where the slick will move and how to control it using booms. In the project, these problems were addressed by developing procedures for using diversion booms in high speed current environments and in revising and implementing a previously developed Oil Spill Trajectory Model

Best practices for the retention of women engineers and scientists in the oil and gas sector

Energy Technology Data Exchange (ETDEWEB)

Emerson, C.J. [Wise Newfoundland and Labrador, St. John' s, NF (Canada); Williams, F.M. [Petro-Canada Inc., (Canada); Sherk, S. [AMEC Earth and Environmental Ltd., St. John' s, NF (Canada)

2000-07-06

This conference paper was the result of a workshop discussion at a national conference that brought together those in industry who work in positions promoting diversity, together with women scientists and engineers from the sector. The objective was to identify effective workplace policies and practices that support and advance women's careers in the sector, and thus enhance retention. The conference paper discusses women in science, engineering and technology fields and in the oil and gas sector. It discusses best practices for the retention of women scientists and engineers in the oil and gas sector. It presents a summary of the workshop, best practices for the industry, and best practices for others. Best practices for the industry that are presented in the paper include: commitment from the top, management training, organizational policy and programs, balancing career and personal life, and career development and training. The paper concluded that companies should be recognized for thoughtful and forward-looking policies and best practice initiatives and that the strongest of the best practices is to make managers accountable for diversity progress in their areas of responsibility. 1 app., 8 refs.

Maximum tech, minimum time. Response and cleanup of the Fidalgo Bay oil spill

International Nuclear Information System (INIS)

Pintler, L.R.

1991-01-01

A booster pump failure on a pipeline at Texaco's Anacortes refinery spilled more than 17,000 gallons of oil into Fidalgo Bay. A description is given of the spill control measures taken under Texaco's Spill Prevention and Control Countermeasures and facility contingency plans. The spill was addressed quickly, and containment booms were used to cordon off the spill. Vacuum trucks, rope mop machines and disk skimmers were used to collect the thickest concentrations of oil, and the oil and water collected was separated at the refinery's wastewater treatment centre. Nonwoven polypropylene sorbent pads, sweeps, booms and oil snares were used to clean up thinner concentrations of oil. Essential steps for a smooth spill response include the following: a comprehensive spill prevention and control countermeasures plan, training and regular drills and testing; immediate notification of appropriate regulatory agencies and company emergency response personnel; and the use of professional oil spill management contractors to assist in spill cleanup. 2 figs

Effects of frying oils' fatty acids profile on the formation of polar lipids components and their retention in French fries over deep-frying process.

Science.gov (United States)

Li, Xiaodan; Li, Jinwei; Wang, Yong; Cao, Peirang; Liu, Yuanfa

2017-12-15

The effects of frying oils' fatty acids profile on the formation of polar components and their retention in French fries and corresponding deep-fried oils were investigated in the present study, using oils with different fatty acids composition. Our analysis showed that the total polar compounds (TPCs) content in French fries was only slightly lower than that in deep-fried oils, indicating that there was no significant difference considering the amounts of TPCs in French fries and deep-fried oils. Our further analysis showed that different polar components in TPCs distributed differently in deep-fried oils and oils extracted from French fries. Specifically, the level of oligomeric and dimeric triacylglycerols was higher in French fries while oxidized triacylglycerols and diacylglycerols content was higher in deep-fried oils. The different retention of TPCs components in French fries may be explained by their interactions with carbohydrates, which are shown to enhance with the increase of hydrophobic property. Chemometric analysis showed that no correlation between the polar compounds level and saturated fatty acids profile was observed. Meanwhile, the polar compounds content was highly correlated with the formation of trans-C18:1, and a highly positive association between polar compounds and C18:2 content was also observed in palm oil. Copyright © 2017 Elsevier Ltd. All rights reserved.

Full-Carpet Design of a Low-Boom Demonstrator Concept

Science.gov (United States)

Ordaz, Irian; Wintzer, Mathias; Rallabhandi, Sriram K.

2015-01-01

The Cart3D adjoint-based design framework is used to mitigate the undesirable o -track sonic boom properties of a demonstrator concept designed for low-boom directly under the flight path. First, the requirements of a Cart3D design mesh are determined using a high-fidelity mesh adapted to minimize the discretization error of the CFD analysis. Low-boom equivalent area targets are then generated at the under-track and one off-track azimuthal position for the baseline configuration. The under-track target is generated using a trim- feasible low-boom target generation process, ensuring that the final design is not only low-boom, but also trimmed at the specified flight condition. The o -track equivalent area target is generated by minimizing the A-weighted loudness using an efficient adjoint-based approach. The configuration outer mold line is then parameterized and optimized to match the off-body pressure distributions prescribed by the low-boom targets. The numerical optimizer uses design gradients which are calculated using the Cart3D adjoint- based design capability. Optimization constraints are placed on the geometry to satisfy structural feasibility. The low-boom properties of the final design are verified using the adaptive meshing approach. This analysis quantifies the error associated with the CFD mesh that is used for design. Finally, an alternate mesh construction and target positioning approach offering greater computational efficiency is demonstrated and verified.

Spray boom for selectively spraying a herbicidal composition onto dicots

DEFF Research Database (Denmark)

2012-01-01

There is provided a method and spray boom for discriminating cereal crop (monocot) and weeds (dicots). The spray boom includes means for digitally recording an image of a selected area to be treated by a nozzle on the spray boom, whereby a plant material is identified based on a segmentation proc...

Radiative evaporation of oil spills on seas or rivers

International Nuclear Information System (INIS)

Summerfield, M.

1993-01-01

Because of the self-evident drawbacks of in situ oil burning as a means of removing spilled oil from water surfaces, a similar technique suggests itself: evaporation of the oil by absorbed heat. Of the various ways in which heat may be brought to the oil surface, intense radiation seems to be the most convenient technique. Oil spilled on water surfaces can be collected by a boom floating in the water, gathered in a catenary-like contour, and deep enough to absorb the beam of radiation near the apex of the catenary. It seems likely that the circulation of oil in the gathered oil layer would serve to assure the minimum of heat conduction (loss of heat) to the water below. The question is, does a radiator intense enough to evaporate oil at a fast enough rate exist? The answer seems to be that a system does indeed exist, developed by the Gas Research Institute, Chicago, Illinois, and manufactured under GRI sponsorship by at least two companies. It was developed for such applications as paint drying. The radiator is heated to over 1400 K by natural gas combustion (with air); the hot surface is made of a ceramic. The efficiency of the overall process, from the standard heat of combustion to the radiation beam emitted, is about 40 percent. If one assumes a reasonable efficiency for the absorption of radiation and its conversion to heat and then its conversion to evaporated oil, one can compute the beam size, the radiator dimensions, the duration required for a boom-full of oil (only one) and the cost. It turns out that, for a 1,000 gal spill (more than the daily average), a duration of about 5 hours suffices for a single overhead radiator; the cost would be about $400 in fuel. A boat carrying the fuel tanks to feed the radiator, trailing the boom apex, is probably the best way to direct the radiation to the oil surface. Cleanup of a spill in this way is assured. One drawback is the smell of the atmosphere laden with the vapor

Development in helicopter tail boom strake applications in the US

Science.gov (United States)

Wilson, John C.; Kelley, Henry L.; Donahue, Cynthia C.; Yenni, Kenneth R.

1988-01-01

The use of a strake or spoiler on a helicopter tail boom to beneficially change helicopter tail boom air loads was suggested in the United States in 1975. The anticipated benefits were a change of tail boom loads to reduce required tail rotor thrust and power and improve directional control. High tail boom air loads experienced by the YAH-64 and described in 1978 led to a wind tunnel investigation of the usefullness of strakes in altering such loads on the AH-64, UH-60, and UH-1 helicopters. The wind tunnel tests of 2-D cross sections of the tail boom of each demonstrated that a strake or strakes would be effective. Several limited test programs with the U.S. Army's OH-58A, AH-64, and UH-60A were conducted which showed the effects of strakes were modest for those helicopters. The most recent flight test program, with a Bell 204B, disclosed that for the 204B the tail boom strake or strakes would provide more than a modest improvement in directional control and reduction in tail rotor power.

Application of GA-PLS and GA-KPLS calculations for the prediction of the retention indices of essential oils

Directory of Open Access Journals (Sweden)

Hadi Noorizadeh

2011-01-01

Full Text Available Genetic algorithm and partial least square (GA-PLS and kernel PLS (GA-KPLS techniques were used to investigate the correlation between retention indices (RI and descriptors for 117 diverse compounds in essential oils from 5 Pimpinella species gathered from central Turkey which were obtained by gas chromatography and gas chromatography-mass spectrometry. The square correlation coefficient leave-group-out cross validation (LGO-CV (Q² between experimental and predicted RI for training set by GA-PLS and GA-KPLS was 0.940 and 0.963, respectively. This indicates that GA-KPLS can be used as an alternative modeling tool for quantitative structure-retention relationship (QSRR studies.

Environmental Pollution: Noise Pollution - Sonic Boom

Science.gov (United States)

1977-06-01

UNCLASSIFIED AD-A041 400 DDC/BIB-77/06 ENVIRONMENTAL POLLUTION NOISE POLLUTION SONIC BOOM A DDC BIBLIOGRAPHY DDC-TAS Cameron Station Alexandria, Va...rn7Sttio 658S-A041 400 4 TITLE xand r.VuhtlVlia) 2 TA i b- 1iblog ra ph y ENVIRONMENTAL POLLUTION : --. Apr-l IM59-Jul, 7NOISE POLLUTION -SONIC BOOM. 1,976...BIBLIOGRAPHY SEARCH CONTROL NO. /2OM09 AD- 769 970 20/1 1/3 DEFENSE UOCUMENTATION CENTER ALEXANDRIA VA ENVIRONMENTAL POLLUTION : NOISE POLLUTION

Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to

Science.gov (United States)

Coast Hybrid and Electric Vehicles Boom Coast to Coast to someone by E-mail Share Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to Coast on Facebook Tweet about Alternative Fuels Data Center: Hybrid and Electric Vehicles Boom Coast to Coast on Twitter Bookmark Alternative

State of the art of sonic boom modeling

Science.gov (United States)

Plotkin, Kenneth J.

2002-01-01

Based on fundamental theory developed through the 1950s and 1960s, sonic boom modeling has evolved into practical tools. Over the past decade, there have been requirements for design tools for an advanced supersonic transport, and for tools for environmental assessment of various military and aerospace activities. This has resulted in a number of advances in the understanding of the physics of sonic booms, including shock wave rise times, propagation through turbulence, and blending sonic boom theory with modern computational fluid dynamics (CFD) aerodynamic design methods. This article reviews the early fundamental theory, recent advances in theory, and the application of these advances to practical models.

Heat transfer property of refrigerant-oil mixture in a flooded evaporator: The role of bubble formation and oil retention

International Nuclear Information System (INIS)

Koo, Kyoung-Min; Kim, Sung-Gyu; Jeong, Young-Man; Lee, Jae-Keun; Kim, Soo Hyung; Lee, Soowon; Park, Nae-Hyun; Na, Byung-Chul; Hwang, Yoon-Jae; Kim, Byung-Soon; Hwang, Joon-Hyun

2013-01-01

We examined the effect of oil retention on the heat transfer performance of a shell-and-tube-type evaporator which had 26 inner tubes and was filled with the refrigerant R-134a. The refrigerant was boiled on the surface of the inner tubes in the evaporator, while chilled water circulated through these tubes. An experimental apparatus was designed to measure both the pressure and temperature profiles at the inlet and outlet of the flooded evaporator. Four windows were installed for observing the operation of the flooded evaporator. A series of experiments were carried out under the following conditions: the refrigerant saturation temperature, 5 .deg. C; refrigerant inlet quality, 0.1; heat fluxes from water to the refrigerant, 5-7 kW/m"2.. The concentration of the oil retained in the refrigerant was then varied up to approximately 10% to observe the effect on the heat transfer performance of the flooded evaporator. Increasing the oil content (i.e., increasing the concentration up to a maximum of approximately 10%) in the refrigerant R134a did not lead to any appreciable reduction in the overall heat transfer coefficient of a flooded evaporator with multiple-inner-tubes. When the oil concentration in the refrigerant was approximately 10%, the heat transfer degradation in the case of the flooded evaporator with multiple-inner-tubes was approximately 11%, which was found to be much smaller than the heat transfer degradation in the case of a flooded evaporator with a single-tube (26-49%). This observation suggested that the oil retained in the refrigerant did not significantly deteriorate the heat transfer performance of the flooded evaporator, presumably because the presence of tube bundles promoted forced convection by agitating bubbles

Combining conservation value, vulnerability, and effectiveness of mitigation actions in spatial conservation decisions: an application to coastal oil spill combating.

Science.gov (United States)

Ihaksi, Taina; Kokkonen, Teemu; Helle, Inari; Jolma, Ari; Lecklin, Tiina; Kuikka, Sakari

2011-05-01

Increasing oil transportation and severe oil accidents in the past have led to the development of various sensitivity maps in different countries all over the world. Often, however, the areas presented on the maps are far too large to be safeguarded with the available oil combating equipment and prioritization is required to decide which areas must be safeguarded. While oil booms can be applied to safeguard populations from a drifting oil slick, decision making on the spatial allocation of oil combating capacity is extremely difficult due to the lack of time, resources and knowledge. Since the operational decision makers usually are not ecologists, a useful decision support tool including ecological knowledge must be readily comprehensible and easy to use. We present an index-based method that can be used to make decisions concerning which populations of natural organisms should primarily be safeguarded from a floating oil slick with oil booms. The indices take into account the relative exposure, mortality and recovery potential of populations, the conservation value of species and populations, and the effectiveness of oil booms to safeguard different species. The method has been implemented in a mapping software that can be used in the Gulf of Finland (Baltic Sea) for operational oil combating. It could also be utilized in other similar conservation decisions where species with varying vulnerability, conservational value, and benefits received from the management actions need to be prioritized.

The Asymmetric Effects of Oil Price Shocks on the Chinese Stock Market: Evidence from a Quantile Impulse Response Perspective

Directory of Open Access Journals (Sweden)

Huiming Zhu

2016-08-01

Full Text Available This paper uses a quantile impulse response approach to investigate the impact of oil price shocks on Chinese stock returns. This process allows us to uncover asymmetric effects of oil price shocks on stock market returns by taking into account the different quantiles of oil price shocks. Our results show that the responses of Chinese stock market returns to oil price shocks differ greatly, depending on whether the oil and stock market is in a bust or boom state and whether the shock is driven by demand or supply. The impacts of oil price shocks on Chinese stock returns present asymmetric features. In particular during a bust phase, oil supply and demand shocks significantly depress stock market returns, while during a boom period, the aggregate demand shock enhances stock market returns. These results suggest some important implications for investors and decision makers.

Methodology for the Regulation of Boom Sprayers Operating in Circular Trajectories

Directory of Open Access Journals (Sweden)

Alfredo Serreta

2011-04-01

Full Text Available A methodology for the regulation of boom sprayers working in circular trajectories has been developed. In this type of trajectory, the areas of the plots of land treated by the outer nozzles of the boom are treated at reduced rates, and those treated by the inner nozzles are treated in excess. The goal of this study was to establish the methodology to determine the flow of the individual nozzles on the boom to guarantee that the dose of the product applied per surface unit is similar across the plot. This flow is a function of the position of the equipment (circular trajectory radius and of the displacement velocity such that the treatment applied per surface unit is uniform. GPS technology was proposed as a basis to establish the position and displacement velocity of the tractor. The viability of this methodology was simulated considering two circular plots with radii of 160 m and 310 m, using three sets of equipment with boom widths of 14.5, 24.5 and 29.5 m. Data showed as increasing boom widths produce bigger errors in the surface dose applied (L/m2. Error also increases with decreasing plot surface. As an example, considering the three boom widths of 14.5, 24.5 and 29.5 m working on a circular plot with a radius of 160 m, the percentage of surface with errors in the applied surface dose greater than 5% was 30%, 58% and 65% respectively. Considering a circular plot with radius of 310 m the same errors were 8%, 22% and 31%. To obtain a uniform superficial dose two sprayer regulation alternatives have been simulated considering a 14.5 m boom: the regulation of the pressure of each nozzle and the regulation of the pressure of each boom section. The viability of implementing the proposed methodology on commercial boom sprayers using GPS antennas to establish the position and displacement velocity of the tractor was justified with a field trial in which a self-guiding commercial GPS system was used along with three precision GPS systems located in

Stress Analysis of Boom of Special Mobile Crane for Plain Region in Transmission Line

Science.gov (United States)

Qin, Jian; Shao, Tao; Chen, Jun; Wan, Jiancheng; Li, Zhonghuan; Jiang, Ming

2017-10-01

Basis of the boom force analysis of special mobile crane for plain region in transmission line, the load type of boom design is confirmed. According to the different combinations of boom sections, the composite pattern of the different boom length is obtained to suit the actual conditions of boom overlapping. The large deformation model is employed with FEM to simulate the stress distribution of boom, and the calculation results are checked. The performance curves of rated load with different arm length and different working range are obtained, which ensures the lifting capacity of special mobile crane meeting the requirement of tower erection of transmission line. The proposed FEM of boom of mobile crane would provide certain guiding and reference to the boom design.

Design of the De-Orbit Sail Boom Deployment Unit

Science.gov (United States)

Meyer, Sebastian; Hillebrandt, Martin; Straubel, Marco; Huhne, Christian

2014-06-01

The design of the De-Orbit Sail boom deployment unit is strongly driven by volume constraints, which are given by the cubesat container. Four CFRP (carbon fiber reinforced polymer) booms [4] with a cross-sectional shape of a double-omega and a length of 3.6 m are reeled on one spool in the center of the unit. The deployment of the four booms are controlled by an electric motor, which acts on the boom spool. Due to the volume limitation caused by the dimensions of the cubesat deployer the deployment unit has little room for the mechanisms components. With the aim to achieve a robust design, the deployment concept of the unit has greatly changed during the development process. The history of the design as well as the mechanisms are described. Additionally the results of the flight model testing are presented.

Natural Resources Management: The Effect of the Commodity Boom on Indonesia’s Industrial Development and Welfare

Directory of Open Access Journals (Sweden)

Maria Monica Wihardja

2016-03-01

Full Text Available The end of the commodity boom in 2012 once again exposed Indonesia to the vulnerability of the commodity price shocks. This article reviews how Indonesia managed its natural resources in 2001–12 and when the commodity boom ends. What are the lessons learned? Indonesia’s experience is similar to that of other countries rich in natural resources, including the crowding-out of non-commodity sectors, protectionist trade regimes, fiscal inefficiency, slow skill accumulation, rising inequality and environmental damages. In the aftermath of the global financial crisis of 2008–09, the early trade -policy response at the end of the commodity boom is inward-looking and protective of domestic markets and industries and aims to increase the added value of commodities by downstreaming. This trend is clearly reflected in the 2014 Trade Law, the 2014 Industry Law and the mineral export ban, which was introduced in 2009 through the 2009 Law on Mining of Coal and Minerals and took effect in 2014. Indonesia should learn from other countries in managing its resource revenues, such as through a commodity fund designed to fit its domestic specificity. Reindustrializing, increasing agricultural productivity beyond palm oil and tapping the country’s potential in the services sector including tourism and creative industries are also necessary to promote diversification in production and trade. Resource management policy should also include stronger environmental regulations.

Alyeska/SERVS technological innovations for oil spill response

International Nuclear Information System (INIS)

Hillman, S.O.

1996-01-01

An overview of technological innovations in spill response by Alyeska Pipeline Service Company/SERVS (ship escort response vessel system), was presented. The company has developed a number of spill response techniques which have needed new strategies and modified equipment for fulfillment of the Prince William Sound Tanker Oil Discharge Prevention and Contingency Plan. One of the strategies was the training of personnel to be ready to deploy massive quantities of equipment on short notice to potential spill sites over an 11,000 square mile water body with more than 3,200 miles of wilderness shoreline. Specific response equipment and decision-making tools have been developed in direct support of large scale programs. Along with oil slick tracking buoys and mini barges, SERVS has developed high capacity skimmers with recovery capacities approaching 2,000 to 3,000 barrels of liquid per hour and strategy boom-towing vessels which divert oil into a long U shaped containment boom. SERVS fishing vessel program, hatchery protection and remote response center equipment program, and wildlife treatment facilities were also described. 10 refs., 13 figs

Flavor retention of peppermint (Mentha piperita L.) essential oil spray-dried in modified starches during encapsulation and storage

DEFF Research Database (Denmark)

Baranauskiene, R.; Bylaite, Egle; Zukauskaite, J.

2007-01-01

The effect of different commercial modified food starch carrier materials on the flavor retention of the essential oil (EO) of peppermint (Mentha piperita L.) during spray drying and storage was evaluated. The obtained results revealed that the emulsification and encapsulation efficiencies...... individual compounds were observed. Larger differences in the compositions of surface oils from various encapsulation products were obtained. Flavor components were released at different rates by each of the encapsulated products. The aroma binding capacity of different modified starch matrices to lock EO...... droplets depends on the water activity, and the leakage of aromas from encapsulated powder products during storage increased with increasing water activity....

Shuttle sonic boom - Technology and predictions. [environmental impact

Science.gov (United States)

Holloway, P. F.; Wilhold, G. A.; Jones, J. H.; Garcia, F., Jr.; Hicks, R. M.

1973-01-01

Because the shuttle differs significantly in both geometric and operational characteristics from conventional supersonic aircraft, estimation of sonic boom characteristics required a new technology base. The prediction procedures thus developed are reviewed. Flight measurements obtained for both the ascent and entry phases of the Apollo 15 and 16 and for the ascent phase only of the Apollo 17 missions are presented which verify the techniques established for application to shuttle. Results of extensive analysis of the sonic boom overpressure characteristics completed to date are presented which indicate that this factor of the shuttle's environmental impact is predictable, localized, of short duration and acceptable. Efforts are continuing to define the shuttle sonic boom characteristics to a fine level of detail based on the final system design.

High-Speed Research: 1994 Sonic Boom Workshop. Configuration, Design, Analysis and Testing

Science.gov (United States)

McCurdy, David A. (Editor)

1999-01-01

The third High-Speed Research Sonic Boom Workshop was held at NASA Langley Research Center on June 1-3, 1994. The purpose of this workshop was to provide a forum for Government, industry, and university participants to present and discuss progress in their research. The workshop was organized into sessions dealing with atmospheric propagation; acceptability studies; and configuration design, and testing. Attendance at the workshop was by invitation only. The workshop proceedings include papers on design, analysis, and testing of low-boom high-speed civil transport configurations and experimental techniques for measuring sonic booms. Significant progress is noted in these areas in the time since the previous workshop a year earlier. The papers include preliminary results of sonic boom wind tunnel tests conducted during 1993 and 1994 on several low-boom designs. Results of a mission performance analysis of all low-boom designs are also included. Two experimental methods for measuring near-field signatures of airplanes in flight are reported.

USAF Flight Test Investigation of Focused Sonic Booms: Project Have Bears

Science.gov (United States)

Downing, Micah; Zamot, Noel; Moss, Chris; Morin, Daniel; Wolski, Ed; Chung, Sukhwan; Plotkin, Kenneth; Maglieri, Domenic

1996-01-01

Supersonic operations from military aircraft generate sonic booms that can affect people, animals and structures. A substantial experimental data base exists on sonic booms for aircraft in steady flight and confidence in the predictive techniques has been established. All the focus sonic boom data that are in existence today were collected during the 60's and 70's as part of the information base to the US Supersonic Transport program and the French Jericho studies for the Concorde. These experiments formed the data base to develop sonic boom propagation and prediction theories for focusing. There is a renewed interest in high-speed transports for civilian application. Moreover, today's fighter aircraft have better performance capabilities, and supersonic flights ars more common during air combat maneuvers. Most of the existing data on focus booms are related to high-speed civil operations such as transitional linear accelerations and mild turns. However, military aircraft operating in training areas perform more drastic maneuvers such as dives and high-g turns. An update and confirmation of USAF prediction capabilities is required to demonstrate the ability to predict and control sonic boom impacts, especially those produced by air combat maneuvers.

Laboratory hydro-mechanical characterisation of Boom Clay at Essen and Mol

International Nuclear Information System (INIS)

Deng, Y. F.; Tang, A. M.; Cui, Y. J.; Nguyen, X. P.; Li, X. L.; Wouters, L.

2011-01-01

Boom Clay has been selected as a potential host rock formation for the geological disposal of radioactive waste in Belgium. In the present work, the hydro-mechanical behaviour of Boom Clay samples from the borehole Essen-1 at a depth of 220-260 m and from HADES that is the underground rock laboratory at Mol in Belgium, at 223-m depth was investigated in the laboratory by performing low pressure odometer tests (vertical effective stress ranging from 0.05 to 3.2 MPa), high pressure odometer tests (vertical effective stress ranging from 0.125 to 32 MPa), isotropic consolidation tests (confining effective stress ranging from the in situ stress to 20 MPa) and triaxial shear tests. It has been observed that the mineralogy, geotechnical properties and hydro-mechanical behaviour of Boom Clay from Essen at 227-m, 240-m and 248-m depths are similar to that of Boom Clay from Mol. As in the case of Boom Clay at Mol, the failure envelope of Boom Clay at Essen in the p'- q plane is not linear. The slope of the portion beyond the pre-consolidation stress of Boom Clay from Essen is almost the same as that from Mol, suggesting a similar internal friction angle of about 13 deg. The compression curves (void index I v versus logarithm of vertical stress) beyond the pre-consolidation stress are the same for both samples from Mol and Essen, and situated between the intrinsic compression line (ICL) and the sedimentation compression line (SCL). The yield stress determined from odometer tests seems to be stress-path dependent and lower than the pre-consolidation stress. Thus determining the over-consolidation ratio (OCR) using the yield stress value would lead to an incorrect estimate. From a practical point view, the laboratory test results from Essen and their comparison with those from Mol provide important information regarding the transferability of knowledge on Boom Clay at different sites, taking into account the fact that most investigations have been carried out on Boom Clay at

Sonic boom predictions using a modified Euler code

Science.gov (United States)

Siclari, Michael J.

1992-04-01

The environmental impact of a next generation fleet of high-speed civil transports (HSCT) is of great concern in the evaluation of the commercial development of such a transport. One of the potential environmental impacts of a high speed civilian transport is the sonic boom generated by the aircraft and its effects on the population, wildlife, and structures in the vicinity of its flight path. If an HSCT aircraft is restricted from flying overland routes due to excessive booms, the commercial feasibility of such a venture may be questionable. NASA has taken the lead in evaluating and resolving the issues surrounding the development of a high speed civilian transport through its High-Speed Research Program (HSRP). The present paper discusses the usage of a Computational Fluid Dynamics (CFD) nonlinear code in predicting the pressure signature and ultimately the sonic boom generated by a high speed civilian transport. NASA had designed, built, and wind tunnel tested two low boom configurations for flight at Mach 2 and Mach 3. Experimental data was taken at several distances from these models up to a body length from the axis of the aircraft. The near field experimental data serves as a test bed for computational fluid dynamic codes in evaluating their accuracy and reliability for predicting the behavior of future HSCT designs. Sonic boom prediction methodology exists which is based on modified linear theory. These methods can be used reliably if near field signatures are available at distances from the aircraft where nonlinear and three dimensional effects have diminished in importance. Up to the present time, the only reliable method to obtain this data was via the wind tunnel with costly model construction and testing. It is the intent of the present paper to apply a modified three dimensional Euler code to predict the near field signatures of the two low boom configurations recently tested by NASA.

Boom Booom Net Radio

DEFF Research Database (Denmark)

Grimshaw, Mark Nicholas; Yong, Louisa; Dobie, Ian

1999-01-01

of an existing Internet radio station; Boom Booom Net Radio. Whilst necessity dictates some use of technology-related terminology, wherever possible we have endeavoured to keep such jargon to a minimum and to either explain it in the text or to provide further explanation in the appended glossary....

Managing Credit Booms and Busts : A Pigouvian Taxation Approach

NARCIS (Netherlands)

Jeanne, O.; Korinek, A.

2010-01-01

We study a dynamic model in which the interaction between debt ac- cumulation and asset prices magni es credit booms and busts. We find that borrowers do not internalize these feedback e¤ects and therefore suf- fer from excessively large booms and busts in both credit flows and asset prices. We show

Oil heritage district : Lambton County Ontario

Energy Technology Data Exchange (ETDEWEB)

Shearer, W. [Wendy Shearer Landscape Architect, Kitchener, ON (Canada)

2009-07-01

This paper discussed a project conducted to assess the cultural heritage values of oil field equipment in Lambton County, Ontario. Oil was discovered in the region in 1858, after which a boom and bust cycle of exploration created a large rural-industrial landscape. The region now contains a unique collection of historic oil equipment. The region's industrial footprint is interwoven with village settlements, agricultural settlements, and a railway and road network linking the region to remote refineries. Oil wells in the region still operate using a jerker line system developed in the early twentieth century. The operational oil wells are subject to fluctuating oil prices and environmental protection requirements. The project presents a rare opportunity to place industrial heritage conservation directly in the hands of business operators and regulators, while also functioning as part of a living community. 2 figs.

Inlet Trade Study for a Low-Boom Aircraft Demonstrator

Science.gov (United States)

Heath, Christopher M.; Slater, John W.; Rallabhandi, Sriram K.

2016-01-01

Propulsion integration for low-boom supersonic aircraft requires careful inlet selection, placement, and tailoring to achieve acceptable propulsive and aerodynamic performance, without compromising vehicle sonic boom loudness levels. In this investigation, an inward-turning streamline-traced and axisymmetric spike inlet are designed and independently installed on a conceptual low-boom supersonic demonstrator aircraft. The airframe was pre-shaped to achieve a target ground under-track loudness of 76.4 PLdB at cruise using an adjoint-based design optimization process. Aircraft and inlet performance characteristics were obtained by solution of the steady-state Reynolds-averaged Navier-Stokes equations. Isolated cruise inlet performance including total pressure recovery and distortion were computed and compared against installed inlet performance metrics. Evaluation of vehicle near-field pressure signatures, along with under- and off-track propagated loudness levels is also reported. Results indicate the integrated axisymmetric spike design offers higher inlet pressure recovery, lower fan distortion, and reduced sonic boom. The vehicle with streamline-traced inlet exhibits lower external wave drag, which translates to a higher lift-to-drag ratio and increased range capability.

Bust without boom.

Science.gov (United States)

Goldzieher, J W

2000-01-01

Just like injectables, oral contraceptives (OCs), including progestin-only ¿minipill¿ and ¿morning-after¿ pill regimens, have experienced a bust without a boom. Fear of political and religious backlash over emergency contraceptives containing estrogen and progestin prompted large companies not to market these regimens. Another major factor in the bust phase of OC use and acceptance has been a small coterie of English and American epidemiologists focused on the adverse effects of Ocs, including risks of thrombotic events, heart attacks, and strokes. The media played a crucial role in the bust phase of these OCs. In the UK, the alleged increase of cancer risk with pill use, which leaked before publication in London newspapers, resulted in 50,000 additional unintended pregnancies. Nevertheless, there is no doubt that boom-and-bust cycles will continue simply because many of the actors in this drama have too great a vested interest to desist. Groups involved in this field must recognize the hazards that come with the territory and be proactive, anticipatory, and well armed with facts--and get good with media access. Drug companies should think on a long-term basis the potential effects of leaving the field, as they have done, or shooting down competitive innovations.

Analysis of Nozzle Jet Plume Effects on Sonic Boom Signature

Science.gov (United States)

Bui, Trong

2010-01-01

An axisymmetric full Navier-Stokes computational fluid dynamics (CFD) study was conducted to examine nozzle exhaust jet plume effects on the sonic boom signature of a supersonic aircraft. A simplified axisymmetric nozzle geometry, representative of the nozzle on the NASA Dryden NF-15B Lift and Nozzle Change Effects on Tail Shock (LaNCETS) research airplane, was considered. The highly underexpanded nozzle flow is found to provide significantly more reduction in the tail shock strength in the sonic boom N-wave pressure signature than perfectly expanded and overexpanded nozzle flows. A tail shock train in the sonic boom signature, similar to what was observed in the LaNCETS flight data, is observed for the highly underexpanded nozzle flow. The CFD results provide a detailed description of the nozzle flow physics involved in the LaNCETS nozzle at different nozzle expansion conditions and help in interpreting LaNCETS flight data as well as in the eventual CFD analysis of a full LaNCETS aircraft. The current study also provided important information on proper modeling of the LaNCETS aircraft nozzle. The primary objective of the current CFD research effort was to support the LaNCETS flight research data analysis effort by studying the detailed nozzle exhaust jet plume s imperfect expansion effects on the sonic boom signature of a supersonic aircraft. Figure 1 illustrates the primary flow physics present in the interaction between the exhaust jet plume shock and the sonic boom coming off of an axisymmetric body in supersonic flight. The steeper tail shock from highly expanded jet plume reduces the dip of the sonic boom N-wave signature. A structured finite-volume compressible full Navier-Stokes CFD code was used in the current study. This approach is not limited by the simplifying assumptions inherent in previous sonic boom analysis efforts. Also, this study was the first known jet plume sonic boom CFD study in which the full viscous nozzle flow field was modeled, without

Flow distortion on boom mounted cup anemometers

DEFF Research Database (Denmark)

Lindelöw, Per Jonas Petter; Friis Pedersen, Troels; Gottschall, Julia

In this report we investigate on wind direction dependent errors in the measurement of the horizontal wind speed by boom mounted cup anemometers. The boom mounting on the studied lattice tower is performed according to IEC standard design rules, yet, larger deviations than predicted by flow models...... are observed. The errors on the measurements are likely caused by an underestimation of the flow distortions around the tower. In this paper an experimental method for deriving a correction formula and an in-field calibration is suggested. The method is based on measurements with two cup anemometers mounted...

Sheath-Based Rollable Lenticular-Shaped and Low-Stiction Composite Boom

Science.gov (United States)

Fernandez, Juan M. (Inventor)

2018-01-01

Various embodiments provide rollable and deployable composite booms that may be used in a wide range of applications both for space and terrestrial structural solutions. Various embodiment composite booms may be bistable, i.e. having a stable strain energy minimum in the coiled configuration as well as the in the deployed configuration. In various embodiments, a boom may be fabricated by aligning two independent tape-springs front-to-front encircled by a durable seamless polymer sleeve. The durable seamless polymer sleeve may allow the two tape-springs to slide past each other during the coiling/deployment process so as to reduce, e.g., minimize, shear and its derived problems.

DOES VOLATILITY IN CRUDE OIL PRICE PRECIPITATE MACROECONOMIC PERFORMANCE IN NIGERIA?

Directory of Open Access Journals (Sweden)

Joseph Ayoola Omojolaibi

2013-01-01

Full Text Available This study examines the effects of crude oil price changes on economic activity in an oil dependent economy-Nigeria. A small open economy structural vector autoregressive (SVAR technique is employed to study the macroeconomic dynamics of domestic price level, economic output, money supply and oil price in Nigeria. The sample covers the data from 1985:q1 to 2010:q4. The Impulse Response Functions (IRFs and the Forecast Error Variance Decompositions (FEVDs results suggest that domestic policies, instead of oil-boom should be blamed for inflation. Also, oil price variations are driven mostly by oil shocks, however, domestic shocks are responsible for a reasonable portion of oil price variations.

The challenge of the second oil boom? [3. Millenium International Petroleum Conference

International Nuclear Information System (INIS)

Wells, M.

1997-01-01

The Third Millennium International Petroleum Conference is briefly reported at which the competitive challenges faced by the upstream industry were considered. An oil industry wanting to be successful in facing these challenges was perceived by Mobil Oil's Vice-President of Global Business Strategy as requiring the following attributes: the ability to partner with others; a truly global perspective; a balanced portfolio to manage risk; strong technological orientation; the capacity to attract an innovative work-force. The new background of energy geopolitics brought about by the integration of Russia, the CIS countries, China and India into the world market economy, was sketched by the former Exploration Director of Premier Oil. Attention was drawn to the concern and tension being created in the Middle East by the restructuring of oil and gas development arising out of the current US containment foreign policy. This policy is changing the geographical focus and regional strategies of US oil companies and contractors. Some examples of these were presented in papers by other US participants. Contributions from natioan producing companies from other countries demonstrated the opportunities offered to foreign countries by increased liberalisation. (UK)

Chemical composition of the essential oils of Citrus sinensis cv. valencia and a quantitative structure-retention relationship study for the prediction of retention indices by multiple linear regression

Directory of Open Access Journals (Sweden)

Larijani Kambiz

2011-01-01

Full Text Available The chemical composition of the volatile fraction obtained by head-space solid phase microextraction (HS-SPME, single drop microextraction (SDME and the essential oil obtained by cold-press from the peels of C. sinensis cv. valencia were analyzed employing gas chromatography-flame ionization detector (GC-FID and gas chromatography-mass spectrometry (GC-MS. The main components were limonene (61.34 %, 68.27 %, 90.50 %, myrcene (17.55 %, 12.35 %, 2.50 %, sabinene (6.50 %, 7.62 %, 0.5 % and α-pinene (0 %, 6.65 %, 1.4 % respectively obtained by HS-SPME, SDME and cold-press. Then a quantitative structure-retention relationship (QSRR study for the prediction of retention indices (RI of the compounds was developed by application of structural descriptors and the multiple linear regression (MLR method. Principal components analysis was used to select the training set. A simple model with low standard errors and high correlation coefficients was obtained. The results illustrated that linear techniques such as MLR combined with a successful variable selection procedure are capable of generating an efficient QSRR model for prediction of the retention indices of different compounds. This model, with high statistical significance (R2 train = 0.983, R2 test = 0.970, Q2 LOO = 0.962, Q2 LGO = 0.936, REP(% = 3.00, could be used adequately for the prediction and description of the retention indices of the volatile compounds.

Booming Asia-Pacific oil trade spawns regional storage projects

International Nuclear Information System (INIS)

Land, R.

1992-01-01

This paper reports that surging oil trade in the Asia-Pacific region is spawning a number of big petroleum storage projects there. Among the biggest are those in Indonesia and Singapore. A group led by Singapore's Sembawang Group plans to build a $272 million (Singapore) oil storage terminal on Karimun Island in Riau province, Indonesia. Other participants include Kuo International, Hong Kong, and likely companies from Japan, Europe, and the U.S. According to press reports from Jakarta and Singapore, Van Ommeren Terminals of Netherlands was also reportedly involved in negotiations on the projects. A joint venture agreement was expected to be signed by the third quarter. Plans call for building a terminal with a capacity of 1.5 million cu m on the island, where Sembawang has a 100 year lease. Ultimately, Sembawang and Indonesian company Bangun Cipta want to develop the site as an industrial city with petrochemical plants, engineering and manufacturing industries, and shipyards. Semabawang Project Engineering recently completed a feasibility study of the Karimun storage project

The effect of generation on retention of women engineers in aerospace and industry

Science.gov (United States)

Kiernan, Kristine Maria

The purpose of this dissertation was to determine the nature and extent of differences between generational cohorts regarding the effect of family factors on retention of women in engineering, with an emphasis on women in the aerospace industry. While 6% of the aerospace workforce is made up of aeronautical engineers, an additional 11.2% of the aerospace workforce is drawn from other engineering disciplines. Therefore, the analysis included all engineering sub-disciplines. In order to include women who had left the workforce, women in all industries were used as a proxy for women in aerospace. Exits to other fields were modeled separately from exits out of the workforce. The source of data was the National Survey of College Graduates. Women engineers were divided into the Baby Boom cohort (born 1945-1964), the Generation X cohort (born 1965-1980), and the Millennial cohort (born 1981-1997). A time-lag design was used to compare generational cohorts when they were the same age. The results of this study showed that generational cohort did not affect retention of women in engineering. However, generational cohort affected family formation decisions, with Millennial women marrying and having children later than their counterparts in the Generation X and Baby Boom cohorts. Generational cohort also affected the influence of motherhood on retention in the workforce, with Generation X and Millennial mothers more likely to stay in the workforce than their counterparts in the Baby Boom cohort. There was no significant difference between Generation X and Millennial women in the proportion of mothers who stayed in the workforce. Generational cohort influenced the reasons women left the workforce. Women in the Millennial cohort were more likely to cite not needing or wanting to work, while women in the Generation X cohort were more likely to cite family responsibilities. Among mothers in the Millennial cohort who were out of the workforce, the proportion who cited not needing

The Newfoundland in-situ Oil Burn Experiment - NOBE

International Nuclear Information System (INIS)

Fingas, M.; Li, K.; Ackerman, F.; Bissonnette, M.C.; Lambert, P.; Halley, G.; Nelson, R.; Belanger, J.; Pare, J.R.P.; Campagna, P.R.

1993-01-01

A group of over 25 Canadian and US agencies conducted a major offshore oil spill burn near Newfoundland. Over 20 vesels, 7 aircraft, and 230 people were involved in this test, the largest of its kind ever conducted. The burn involved release of two oil spills of ca 50 tons each into a towed fireproof boom. Each burn lasted over an hour. The burn plume was sampled using remote-controlled helicopters and a blimp, and air emissions were monitored downwind from remote controlled boats which also took water samples and temperatures. Over 200 sensors or samplers were used; these will yield data on over 2,000 parameters or substances. Preliminary results are reported. Burning occurred outside the boom due to some initial oil splashover, but this did not result in sheening or significant oil loss. The scaling of burns from test tanks to on-sea burns did not always hold true. Quantitative analytical data showed that emissions from this in-situ fire were less than expected; all measured compounds and parameters were below health concern levels beyond ca 150 m from the fire and very little was detected beyond 500 m. Polycyclic aromatic hydrocarbons (PAH) were found to be lower in the soot than in the starting oil and were consumed by the fire to a large degree. Particulates were found to be of concern only up to 150 m downwind at sea level. Combustion gases did not reach levels of concern and volatile organics were in high concentrations but less than those emitted from a non-burning spill. No compounds of concern could be detected in the water samples. Burn residue samples had lower PAH levels than the starting oil. Generally, burning oil spills at sea was found to be feasible and practical. 2 refs., 9 figs., 3 tabs

Dynamic simulation of a planar flexible boom for tokamak in-vessel operations

International Nuclear Information System (INIS)

Ambrosino, G.; Celentano, G.; Garofalo, F.; Maisonnier, D.

1991-01-01

In this paper we present a dynamic model for the analysis of the vibrations of a planar articulated flexible boom to be used for tokamak in-vessel maintenance operations. The peculiarity of the mechanical structure of the boom enables us to consider separately the oscillations in the horizontal and vertical planes so that two separate models can be constructed for describing these phenomena. The results of simulations based on booms like that proposed for NET in-vessel operations are presented. (orig.)

The NET articulated boom: Preliminary investigations and justification for a full scale prototype

International Nuclear Information System (INIS)

Suppan, A.

1990-12-01

The articulated boom system is the favourite in-vessel handling system for NET which will be used to maintain or replace in-vessel components during short term interventions. The testbed EDITH is the prototype of this system and is the logical step between the proof of principle of the system, which is already performed by the JET articulated boom, and the operational equipment for NET. EDITH is required to demonstrate that maintenance of plasma facing components can be carried out with the anticipated reliability and time. To achieve this aim EDITH is based on the experience of the JET boom and will be constructed in full scale, supplemented by a full scale mock-up. A further goal of EDITH is to allow the testing of boom components and subassemblies. The results of preliminary investigations for the boom are summarized, the need of the testbed EDITH and a full scale mock-up is discussed and both EDITH and the mock-up are described. (orig.) [de

MODEL CORRELATION STUDY OF A RETRACTABLE BOOM FOR A SOLAR SAIL SPACECRAFT

Science.gov (United States)

Adetona, O.; Keel, L. H.; Oakley, J. D.; Kappus, K.; Whorton, M. S.; Kim, Y. K.; Rakpczy, J. M.

2005-01-01

To realize design concepts, predict dynamic behavior and develop appropriate control strategies for high performance operation of a solar-sail spacecraft, we developed a simple analytical model that represents dynamic behavior of spacecraft with various sizes. Since motion of the vehicle is dominated by retractable booms that support the structure, our study concentrates on developing and validating a dynamic model of a long retractable boom. Extensive tests with various configurations were conducted for the 30 Meter, light-weight, retractable, lattice boom at NASA MSFC that is structurally and dynamically similar to those of a solar-sail spacecraft currently under construction. Experimental data were then compared with the corresponding response of the analytical model. Though mixed results were obtained, the analytical model emulates several key characteristics of the boom. The paper concludes with a detailed discussion of issues observed during the study.

Icelandic boom and bust - Immigration and the housing market

OpenAIRE

Lúðvík Elíasson

2014-01-01

Possible explanations for the rapid increase in house prices and housing investment in Iceland between 2004 and 2007 and the subsequent market crash are studied. The boom was driven in part by banking liberalisation, international financial conditions, and domestic policies. A simple demand and supply model, based on the study by Elíasson and Pétursson (2009), is fitted to data through the recent boom-bust period. The model is remarkably robust through the cycle despite its unprecedented ampl...

Price dependence in the principal EU olive oil markets

Energy Technology Data Exchange (ETDEWEB)

Emmanouilides, C.; Fousekis, P.; Grigoriadis, V.

2014-06-01

The objective of this paper is to assess the degree and the structure of price dependence in the principal EU olive oil markets (Spain, Italy and Greece). To this end, it utilizes monthly olive oil price data and the statistical tool of copulas. The empirical results suggest that prices are likely to boom together but not to crash together; this is especially true for the prices of the two most important players, Italy (importer) and Spain (exporter). The finding of asymmetric price co-movements implies that the three principal spatial olive oil markets in the EU cannot be thought of as one great pool. (Author)

Presence and evolution of natural organic matter in the boom clay

International Nuclear Information System (INIS)

Van Geet, M.; Deniau, I.; Largeau, C.; Bruggeman, C.; Maes, A.; Dierckx, A.

2004-01-01

Because of its very low hydraulic conductivity, reducing conditions, slightly alkaline pH, high specific surface, high cation exchange capacity and high plasticity, the Boom Clay is studied as a reference host formation for the deep disposal of high-level long-lived radioactive waste (NIRAS/ONDRAF, 1989). However, Boom Clay also contains up to 5% wt. of organic matter (OM). As radionuclides can form complexes with this organic matter, a detailed characterisation and knowledge of the evolution of the organic matter is necessary. An overview of the characteristics of the organic matter present in Boom Clay is given by Van Geet et al., (2003). The solid phase OM can be up to 5%. The dissolved OM fraction is around 200 mg C per liter of Boom Clay pore water. Both kinds of OM will be discussed. Concerning the solid phase OM the focus will be on the past evolution and its possible future evolution due to a thermal stress. For the dissolved OM, the focus will be on its origin. (author)

Insight conference reports : proceedings of the water and land use in Alberta forum : sustainable resource management in a boom economy

International Nuclear Information System (INIS)

2006-01-01

Alberta's booming oil and gas industry has led to concerns over land and water use in the province. This forum provided a venue for the discussion of issues related to water and land use in Alberta. Various strategies for land use planning were evaluated. Regulatory frameworks for water and land pollution abatement were considered along with strategies for reducing the environmental impacts of oil and gas resource development in the province. The Wildlife, Habitat, and Species at Risk Act was discussed, as well as issues related to Canada's new endangered species laws. Issues concerning water scarcity and stakeholder relations were discussed. Various water management strategies were evaluated. One of the 14 presentations featured at this conference has been catalogued separately for inclusion in this database. refs., tabs., figs

Russia from Bust to Boom: Oil, Politics or the Ruble?

NARCIS (Netherlands)

Merlevede, B.; Schoors, A.; Aarle, B. van

2004-01-01

This paper develops and estimates a small macroeconomic model of the Russian economy. The model is tailored to analyze the impact of the oil price, the exchange rate, and political stability on economic performance. The model does very well in explaining Russia’s economic history in the period

Modeling and simulation of the agricultural sprayer boom leveling system

KAUST Repository

Sun, Jian

2011-01-01

According to the agricultural precision requirements, the distance from sprayer nozzles to the corps should be kept between 50 cm to 70 cm. The sprayer boom also needs to be kept parallel to the field during the application process. Thus we can guarantee the quality of the chemical droplets distribution on the crops. In this paper we design a sprayer boom leveling system for agricultural sprayer vehicles combined with a four-rod linkage self-leveling suspension and electro-hydraulic auto-leveling system. The dynamic analysis shows that the suspension can realize an excellent self-leveling in a comparative small inclination range. In addition we build compensation controller for the electro-hydraulic system based on the mathematical model. With simulations we can optimize the performance of this controller to make sure a fast leveling response to the inclined sprayer boom. © 2011 IEEE.

A summary of the lateral cutoff analysis and results from NASA's Farfield Investigation of No-boom Thresholds

Science.gov (United States)

Cliatt, Larry J.; Hill, Michael A.; Haering, Edward A.; Arnac, Sarah R.

2015-10-01

In support of the ongoing effort by the National Aeronautics and Space Administration (NASA) to bring supersonic commercial travel to the public, NASA, in partnership with other industry organizations, conducted a flight research experiment to analyze acoustic propagation at the lateral edge of the sonic boom carpet. The name of the effort was the Farfield Investigation of No-boom Thresholds (FaINT). The research from FaINT determined an appropriate metric for sonic boom waveforms in the transition and shadow zones called Perceived Sound Exposure Level, established a value of 65 dB as a limit for the acoustic lateral extent of a sonic boom's noise region, analyzed change in sonic boom levels near lateral cutoff, and compared between real sonic boom measurements and numerical predictions.

Sobre o Boom e outras onomatopeias literárias

OpenAIRE

Londoño, Jorge Iván Parra

2016-01-01

Este artículo trata de examinar los alcances literarios del llamado Boom latinoamericano, a medio siglo de su estallido, las cuatro obras más representativas y sus respectivos autores, además de proponer un quinto autor, según la invitación que hiciera en su momento el crítico Ángel Rama. Por otro lado, evalua la respuesta literaria por parte del Post Boom, analizando sus características y su vigencia y, de manera concomitante, los movimientos anejos o posteriores a dicho movimiento, como el ...

Modelling and assessment of accidental oil release from damaged subsea pipelines.

Science.gov (United States)

Li, Xinhong; Chen, Guoming; Zhu, Hongwei

2017-10-15

This paper develops a 3D, transient, mathematical model to estimate the oil release rate and simulate the oil dispersion behavior. The Euler-Euler method is used to estimate the subsea oil release rate, while the Eulerian-Lagrangian method is employed to track the migration trajectory of oil droplets. This model accounts for the quantitative effect of backpressure and hole size on oil release rate, and the influence of oil release rate, oil density, current speed, water depth and leakage position on oil migration is also investigated in this paper. Eventually, the results, e.g. transient release rate of oil, the rise time of oil and dispersion distance are determined by above-mentioned model, and the oil release and dispersion behavior under different scenarios is revealed. Essentially, the assessment results could provide a useful guidance for detection of leakage positon and placement of oil containment boom. Copyright © 2017 Elsevier Ltd. All rights reserved.

Measuring and explaining the baby boom in the developed world in the mid-twentieth century

Directory of Open Access Journals (Sweden)

Jesús J. Sánchez-Barricarte

2018-03-01

Full Text Available Background: The early research on the baby boom tried to account for it as a logical recovery following the end of the Second World War (WWII. But it cannot be understood merely as a post-war phenomenon because its origins go back to the 1930s and early 1940s. Objective: I shall describe the methodology used to measure the total and marital baby boom and provide a detailed description of it. I shall attempt to explain the possible reasons that led to the sharp increase in the marital fertility rates and its subsequent decline. Methods: I will use various fertility indices that track the historical development of fertility (total and marital; period and cohort. Results: I show that there are major differences in the measurement of the baby boom depending on the index used. I found that the baby boom is highly heterogeneous in the 25 countries that form part of my study. It represented the logical response that families made to one period of prolonged political, economic, and military crisis (the crash of 1929 and WWII. Conclusions: Researchers who use only the total fertility indices are really analysing only the nuptiality boom, which took place during those years, rather than changes in reproductive behaviour. Contribution: I measure total and marital baby boom for 25 developed countries and perform the calculations to measure the impact of marital fertility and nuptiality on the total baby boom (TBB. I present a new explanation of the origins of the baby boom.

Design methodology for a community response questionnaire on sonic boom exposure

Science.gov (United States)

Farbry, John E., Jr.; Fields, James M.; Molino, John A.; Demiranda, Gwendolyn A.

1991-01-01

A preliminary draft questionnaire concerning community response to sonic booms was developed. Interviews were conducted in two communities that had experienced supersonic overflights of the SR-71 airplane for several years. Even though the overflights had ceased about 6 months prior to the interviews, people clearly remembered hearing sonic booms. A total of 22 people living in central Utah and 23 people living along Idaho/Washington state border took part in these interviews. The draft questionnaire was constantly modified during the study in order to evaluate different versions. Questions were developed which related to annoyance, startle, sleep disturbance, building vibration, and building damage. Based on the data collected, a proposed community response survey response instrument was developed for application in a full-scale sonic boom study.

Numerical Predictions of Sonic Boom Signatures for a Straight Line Segmented Leading Edge Model

Science.gov (United States)

Elmiligui, Alaa A.; Wilcox, Floyd J.; Cliff, Susan; Thomas, Scott

2012-01-01

A sonic boom wind tunnel test was conducted on a straight-line segmented leading edge (SLSLE) model in the NASA Langley 4- by 4- Foot Unitary Plan Wind Tunnel (UPWT). The purpose of the test was to determine whether accurate sonic boom measurements could be obtained while continuously moving the SLSLE model past a conical pressure probe. Sonic boom signatures were also obtained using the conventional move-pause data acquisition method for comparison. The continuous data acquisition approach allows for accurate signatures approximately 15 times faster than a move-pause technique. These successful results provide an incentive for future testing with greatly increased efficiency using the continuous model translation technique with the single probe to measure sonic boom signatures. Two widely used NASA codes, USM3D (Navier-Stokes) and CART3D-AERO (Euler, adjoint-based adaptive mesh), were used to compute off-body sonic boom pressure signatures of the SLSLE model at several different altitudes below the model at Mach 2.0. The computed pressure signatures compared well with wind tunnel data. The effect of the different altitude for signature extraction was evaluated by extrapolating the near field signatures to the ground and comparing pressure signatures and sonic boom loudness levels.

A Flight Research Overview of WSPR, a Pilot Project for Sonic Boom Community Response

Science.gov (United States)

Cliatt, Larry James; Haering, Ed; Jones, Thomas P.; Waggoner, Erin R.; Flattery, Ashley K.; Wiley, Scott L.

2014-01-01

In support of NASAs ongoing effort to bring supersonic commercial travel to the public, NASA Dryden Flight Research Center and NASA Langley Research Center, in cooperation with other industry organizations, conducted a flight research experiment to identify the methods, tools, and best practices for a large-scale quiet (or low) sonic boom community human response test. The name of the effort was Waveforms and Sonic boom Perception and Response. Such tests will go towards building a dataset that governing agencies like the Federal Aviation Administration and International Civil Aviation Organization will use to establish regulations for acceptable sound levels of overland sonic booms. Until WSPR, there had never been an effort that studied the response of people in their own homes and performing daily activities to non-traditional, low sonic booms.WSPR was a NASA collaborative effort with several industry partners, in response to a NASA Aeronautics Research Mission Directorate Research Opportunities in Aeronautics. The primary contractor was Wyle. Other partners included Gulfstream Aerospace Corporation, Pennsylvania State University, Tetra Tech, and Fidell Associates, Inc.A major objective of the effort included exposing a community with the sonic boom magnitudes and occurrences expected in high-air traffic regions with a network of supersonic commercial aircraft in place. Low-level sonic booms designed to simulate those produced by the next generation of commercial supersonic aircraft were generated over a small residential community. The sonic boom footprint was recorded with an autonomous wireless microphone array that spanned the entire community. Human response data was collected using multiple survey methods. The research focused on essential elements of community response testing including subject recruitment, survey methods, instrumentation systems, flight planning and operations, and data analysis methods.This paper focuses on NASAs role in the efforts

Migrant labor supply in a booming non-renewable resource economy: Cure and transmission mechanism for de-industrialization?

Science.gov (United States)

Nulle, Grant Mark

This paper challenges the determinism that booming resource economies suffer from de-industrialization, the "Dutch Disease". For several decades, economists have attempted to explain how a sudden surge in mineral and energy extraction affects an economy's output and employment from an aggregate and sectoral perspective. Economic theory shows that a "boom" in mineral and energy production is welfare enhancing to the economy experiencing it. However, the phenomenon also induces inter-sectoral adjustments among non-renewable resource (NRR), traditional traded, and non-traded industries that tend to crowd out traditional export sectors such as agriculture and manufacturing. In turn, this paper asks two fundamental questions: 1) Can the inter-sectoral adjustments wrought by a boom in NRR production be mitigated in the resource-abundant economy experiencing it; 2) Can the inter-sectoral adjustments be exported to a neighboring non-resource economy by movements in migrant labor supply? The theoretical model and empirical estimation approach presented in this paper introduces an endogenous migrant labor supply response to booms in NRR output to test the extent traditional tradable sectors shrink in the NRR-abundant economy during the boom and if such effects are exported to a neighboring jurisdiction. Using data at the U.S. county level, the empirical results show that booming economies experience positive and statistically significant rates of real income and traded sector job growth during the boom, attributable to the influx of migrant labor. By contrast, little evidence is found that non-booming counties adjacent to the booming counties experience declines in income or job growth because of labor supply outflows. Instead, the results suggest the larger the number of potential "donor" counties that can supply labor to the booming economies, the more likely the transmission of booming economy effects, namely evidence of de-industrialization, is diffused across all of the

Economic booms and risky sexual behavior: evidence from Zambian copper mining cities.

Science.gov (United States)

Wilson, Nicholas

2012-12-01

Existing studies suggest that individual and household level economic shocks affect the demand for and supply of risky sex. However, little evidence exists on the effects of an aggregate shock on equilibrium risky sexual behavior. This paper examines the effects of the early twenty-first century copper boom on risky sexual behavior in Zambian copper mining cities. The results suggest that the copper boom substantially reduced rates of transactional sex and multiple partnerships in copper mining cities. These effects were partly concentrated among young adults and copper boom induced in-migration to mining cities appears to have contributed to these reductions. Copyright © 2012. Published by Elsevier B.V.

1995 NASA High-Speed Research Program Sonic Boom Workshop. Volume 2; Configuration Design, Analysis, and Testing

Science.gov (United States)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Sonic Boom Workshop on September 12-13, 1995. The workshop was designed to bring together NASAs scientists and engineers and their counterparts in industry, other Government agencies, and academia working together in the sonic boom element of NASAs High-Speed Research Program. Specific objectives of this workshop were to: (1) report the progress and status of research in sonic boom propagation, acceptability, and design; (2) promote and disseminate this technology within the appropriate technical communities; (3) help promote synergy among the scientists working in the Program; and (4) identify technology pacing, the development C, of viable reduced-boom High-Speed Civil Transport concepts. The Workshop was organized in four sessions: Sessions 1 Sonic Boom Propagation (Theoretical); Session 2 Sonic Boom Propagation (Experimental); Session 3 Acceptability Studies-Human and Animal; and Session 4 - Configuration Design, Analysis, and Testing.

Influence of Chair Vibrations on Indoor Sonic Boom Annoyance

Science.gov (United States)

Rathsam, Jonathan; Klos, Jacob; Loubeau, Alexandra

2015-01-01

One goal of NASA’s Commercial Supersonic Technology Project is to identify candidate noise metrics suitable for regulating quiet sonic boom aircraft. A suitable metric must consider the short duration and pronounced low frequency content of sonic booms. For indoor listeners, rattle and creaking sounds and floor and chair vibrations may also be important. The current study examined the effect of such vibrations on the annoyance of test subjects seated indoors. The study involved two chairs exposed to nearly identical acoustic levels: one placed directly on the floor, and the other isolated from floor vibrations by pneumatic elastomeric mounts. All subjects experienced both chairs, sitting in one chair for the first half of the experiment and the other chair for the remaining half. Each half of the experiment consisted of 80 impulsive noises played at the exterior of the sonic boom simulator. When all annoyance ratings were analyzed together there appeared to be no difference in mean annoyance with isolation condition. When the apparent effect of transfer bias was removed, a subtle but measurable effect of vibration on annoyance was identified.

A comprehensive review of oil spill combustion studies

International Nuclear Information System (INIS)

Walavalkar, A.Y.; Kulkarni, A.K.

1996-01-01

The complex process of in-situ burning of oil or a water-in-oil emulsion floating on top of a water-base, such as the ocean, was discussed. The process was examined before, during and after actual combustion. In general, the success of oil spill combustion is measured in terms of the fraction of the spilled oil or emulsion that is burned away. However, the air and aquatic pollution caused by the combustion should also be considered. The physical conditions such as wind velocity, waves and the presence or absence of a containment device, such as a fire boom, could determine the continuation of the combustion process. An overview of the oil spill combustion techniques was provided. There still remains a need for fundamental studies, especially in mathematical modeling, to understand the basic mechanisms and predict the applicability of the in-situ combustion. 74 refs., 7 tabs., 3 figs

Kazakhstan or challenges of an oil economy

International Nuclear Information System (INIS)

Coville, Th.

2006-01-01

The economic growth of Kazakhstan is in full rise, marked by an activity supported by a public demand for full expansion and financed by the rise of the oil incomes. The budgetary expenditure consists mainly of investments in infrastructures in Astana and Almaty, and in the social fields and education. Exports are also in very big rise (+ 40% in 2005) induced by the rise to power of the quantities of exported hydrocarbons. An economic boom which depends on the oil receipts, in spite of the reforms resulting from the economic growth, Kazakhstan remains confronted with the Islamism rise like its neigh ours of the Central Asia. (author)

76 FR 20532 - Safety Zone; Boom Days, Niagara River, Niagara Falls, NY

Science.gov (United States)

2011-04-13

...-AA00 Safety Zone; Boom Days, Niagara River, Niagara Falls, NY AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the Niagara River... Marina and a portion of the Niagara River, Niagara Falls, NY during the Boom Days Fireworks on April 16...

Simulation and controller design for an agricultural sprayer boom leveling system

KAUST Repository

Sun, Jian

2011-01-01

According to the agricultural precision requirements, the distance from sprayer nozzles to the corps should be kept between 50 cm to 70 cm. The sprayer boom also needs to be kept parallel to the field during the operation process. Thus we can guarantee the quality of the chemical droplets distribution on the crops. In this paper we introduced a sprayer boom leveling system for agricultural sprayer vehicles with electro-hydraulic auto-leveling system. The suitable hydraulic actuating cylinder and valve were selected according to the specific systemic specifications. Furthermore, a compensation controller for the electro-hydraulic system was designed based on the mathematical model. With simulations we can optimize the performance of this controller to make sure a fast leveling response to the inclined sprayer boom. © 2011 IEEE.

Babies Bottom Out--A 'Maybe Boom'

Science.gov (United States)

Science News, 1977

1977-01-01

Data for the period September 1976 through April 1977 indicate a rise in the United States birth rate; however, the rate is still below the replacement level. It is speculated that the increase is an "echo" effect to the post-World War II baby boom which peaked in 1957. (SL)

Computer based training for oil spill management

International Nuclear Information System (INIS)

Goodman, R.

1993-01-01

Large oil spills are infrequent occurrences, which poses a particular problem for training oil spill response staff and for maintaining a high level of response readiness. Conventional training methods involve table-top simulations to develop tactical and strategic response skills and boom-deployment exercises to maintain operational readiness. Both forms of training are quite effective, but they are very time-consuming to organize, are expensive to conduct, and tend to become repetitious. To provide a variety of response experiences, a computer-based system of oil spill response training has been developed which can supplement a table-top training program. Using a graphic interface, a realistic and challenging computerized oil spill response simulation has been produced. Integral to the system is a program editing tool which allows the teacher to develop a custom training exercise for the area of interest to the student. 1 ref

A Flight Research Overview of WSPR, a Pilot Project for Sonic Boom Community Response

Science.gov (United States)

Cliatt, Larry J., II; Haering, Edward A., Jr.; Jones, Thomas P.; Waggoner, Erin R.; Flattery, Ashley K.; Wiley, Scott L.

2014-01-01

In support of the ongoing effort by the National Aeronautics and Space Administration (NASA) to bring supersonic commercial travel to the public, the NASA Armstrong Flight Research Center and the NASA Langley Research Center, in cooperation with other industry organizations, conducted a flight research experiment to identify the methods, tools, and best practices for a large-scale quiet (or low) sonic boom community human response test. The name of the effort was Waveforms and Sonic boom Perception and Response (WSPR). Such tests will be applied to building a dataset that governing agencies such as the Federal Aviation Administration and the International Civil Aviation Organization will use to establish regulations for acceptable sound levels of overland sonic booms. The WSPR test was the first such effort that studied responses to non-traditional low sonic booms while the subject persons were in their own homes and performing daily activities.The WSPR test was a NASA collaborative effort with several industry partners, in response to a NASA Aeronautics Research Mission Directorate Research Opportunities in Aeronautics. The primary contractor was Wyle (El Segundo, California). Other partners included Gulfstream Aerospace Corporation (Savannah, Georgia); Pennsylvania State University (University Park, Pennsylvania); Tetra Tech, Inc. (Pasadena, California); and Fidell Associates, Inc. (Woodland Hills, California).A major objective of the effort included exposing a community to the sonic boom magnitudes and occurrences that would be expected to occur in high-air traffic regions having a network of supersonic commercial aircraft in place. Low-level sonic booms designed to simulate those produced by the next generation of commercial supersonic aircraft were generated over a small residential community. The sonic boom footprint was recorded with an autonomous wireless microphone array that spanned the entire community. Human response data were collected using multiple

Brazil: good news for oil is bad news for alcohol

International Nuclear Information System (INIS)

Knight, Patrick

1999-01-01

The impact of the doubling of oil prices and the devaluation of the Brazilian currency on the alcohol fuel programme is examined in this article, and the recent discovery by the Brazilian oil company, Petrobras, of a major new offshore oil field, the government's efforts to boost the consumption of alcohol fuel with subsidies and cheap loans, and the lower costs of running alcohol powered cars are discussed. Details of a major restructuring of the alcohol industry, the production of alcohol between 1994-1999, the boom in sugar exports, the glut of sugar cane, the falling confidence of motorists in alcohol powered cars, and the general move away from subsidies spearheaded by the World Trade Organisation are considered. (UK)

Proceedings of the CERI 2005 Oil Conference : What's next? CD-ROM ed.

International Nuclear Information System (INIS)

2005-01-01

Recent developments in the international petroleum industry were discussed, including events unfolding in the world such as rising oil prices, world oil demand and booming oil markets. The changes reflect both fundamental and geopolitical issues such as OPEC's potential productive capacity. The presentations addressed whether these developments in the petroleum industry represent a structural shift in the market or if they are merely another cyclical movement. In addition to the outlook for world energy markets and prospects for oil supply and reserves, this conference included discussions about oil price differentials, markets for Canadian oil, geopolitical hotspots for exporting countries, enhanced recovery for conventional resources and an oil sands outlook. The role that non-conventional oil play will play in the current marketplace was also addressed. The conference featured 18 presentations, of which 6 have been indexed separately for inclusion in this database. tabs., figs

Spill-Overs of a Resource Boom: Evidence from Zambian Copper Mines

OpenAIRE

Alexander Lippert

2014-01-01

Do local populations benefit from resource booms? How strong are market linkages between the mining sector and the regional economy? This paper exploits exogenous variation in mine-level production volumes generated by the recent copper boom in Zambia to shed light on these questions. Using a novel dataset, I find robust evidence that an increase in local copper production improves living standards in the surroundings of the mines even for households not directy employed in the mining sector:...

Development narratives, notions of forest crisis, and boom of oil palm plantations in Indonesia

NARCIS (Netherlands)

Susanti, Ari; Maryudi, Ahmad

2016-01-01

Indonesia experienced massive deforestation in the last decades where rapid oil palm expansion has been considered as one of the main drivers. This article shows that the process of deforestation and the rapid oil palm expansion cannot be viewed in isolation from broader development contexts.

A new and improved methodology for qualitative and quantitative mineralogical analysis of Boom Clay

International Nuclear Information System (INIS)

Zeelmaekers, E.; Vandenberghe, N.; Honty, M.; De Craen, M.; Derkowski, A.; Van Geet, M.

2010-01-01

Document available in extended abstract form only. A good knowledge of the mineralogy of any host formation studied for geological disposal of high-level radioactive waste, is a prerequisite for understanding the geochemical environment which will determine the migration and retention behaviour of radionuclides. In this respect, the Boom Clay mineralogical composition has been extensively studied last decades as reference host formation (e.g. ARCHIMEDEARGILE project, OECD-NEA clay catalogue report) with the aim to provide reliable data for a safety assessment. However, a comparison of the available literature data clearly showed a serious discrepancy among studies, not only in the quantitative, but also in the qualitative mineralogical composition of the Boom Clay (SAFIR II). The reason for such a huge disagreement could be related, among others, to variable grain size distributions of the studied samples (sample heterogeneity) and differences in the methodological approaches. In particular, the unambiguous characterisation of clay minerals and the quantification of mixed-layer phases appeared as an everlasting problem. This study is aimed at achieving a consensus on the qualitative and quantitative mineralogical data of the Boom Clay using the most advanced techniques currently available in the clay science. A new sampling campaign was performed in such a way that samples are (20 in total) more or less regularly distributed over Boom Clay Formation, ensuring that variations in the grain size distributions due to silty clay-clayey silt layers alternations are accounted for. The novel concept based on an analysis at two levels was applied: (1) bulk rock and (2) clay fraction analysis. (1) A bulk rock analysis consists of conventional XRD analysis with the identification of the principal mineral phases. As a next step, the bulk rock was mixed with a ZnO internal standard and experimental diffraction patterns of randomly oriented powders were analyzed using &apos

Vibration characteristics of a deployable controllable-geometry truss boom

Science.gov (United States)

Dorsey, J. T.

1983-01-01

An analytical study was made to evaluate changes in the fundamental frequency of a two dimensional cantilevered truss boom at various stages of deployment. The truss could be axially deployed or retracted and undergo a variety of controlled geometry changes by shortening or lengthening the telescoping diagonal members in each bay. Both untapered and tapered versions of the truss boom were modeled and analyzed by using the finite element method. Large reductions in fundamental frequency occurred for both the untapered and tapered trusses when they were uniformly retracted or maneuvered laterally from their fully deployed position. These frequency reductions can be minimized, however, if truss geometries are selected which maintain cantilever root stiffness during truss maneuvers.

Rapidly disintegrating vagina retentive cream suppositories of progesterone: development, patient satisfaction and in vitro/in vivo studies.

Science.gov (United States)

Bendas, Ehab Rasmy; Basalious, Emad B

2016-01-01

Our objective was to develop novel vagina retentive cream suppositories (VRCS) of progesterone having rapid disintegration and good vaginal retention. VRCS of progesterone were prepared using oil in water (o/w) emulsion of mineral oil or theobroma oil in hard fat and compared with conventional vaginal suppositories (CVS) prepared by hard fat. VRCS formulations were tested for content uniformity, disintegration, melting range, in vitro release and stability studies. The most stable formulation (VRCS I) was subjected to scaling-up manufacturing and patients' satisfaction test. The rapid disintegration, good retentive properties are applicable through the inclusion of emulsified theobroma oil rather than hydrophilic surfactant into the hard fat bases. The release profile of progesterone from VRCS I showed a biphasic pattern due to the formation of progesterone reservoir in the emulsified theobroma oil. All volunteers involved in patients' satisfaction test showed high satisfactory response to the tested formulation (VRCS). The in vivo pharmacokinetic study suggests that VRCS of progesterone provided higher rate and extent of absorption compared to hard fat based suppositories. Our results proposed that emulsified theobroma oil could be promising to solve the problems of poor patients' satisfaction and variability of drug absorption associated with hard fat suppositories.

ATLAS IV in situ heating test in Boom Clay

International Nuclear Information System (INIS)

Chen, Guangjing; Li, Xiangling; Verstricht, Jan; Sillen, Xavier

2012-01-01

Document available in extended abstract form only. The small scale in-situ ATLAS (Admissible Thermal Loading for Argillaceous Storage) tests are performed to assess the hydro-mechanical effects of a thermal transient on the host Boom clay at the HADES underground research facility in Mol, Belgium. The initial test set-up, consisting of a heater borehole and two observation boreholes, was installed in 1991-1992. The first test (later named 'ATLAS I') was then performed from July 1993 to June 1996; during this time, the heater dissipated a constant power of 900 W. During the second phase ('ATLAS II'), the heating power was doubled (1800 W) and maintained constant from June 1996 to May 1997. This was followed by shutdown and natural cooling starting from June 1997 on. To broaden the THM characterization of the Boom clay at a larger scale and at different temperature levels, the test set-up was extended in 2006 by drilling two additional instrumented boreholes (AT97E and AT98E). The heater was switched on again from April 2007 to April 2008 with a stepwise power increase, followed by an instantaneous shutdown. This phase is called 'ATLAS III'. The above tests have provided a large set of good quality and well documented data on temperature, pore water pressure and total stress; these data allowed to make several interesting observations regarding the thermal anisotropy and THM coupling in the Boom clay. The straightforward geometry and well defined boundary conditions of the tests facilitate the comparison between measurement and numerical modeling studies. Based on the three dimensional coupled THM modeling of the ATLAS III test, the good agreement between measurement and numerical modeling of temperature and pore water pressure yields a set of THM parameters and confirms the thermo-mechanical anisotropy of the Boom clay. To get a better insight in the anisotropic THM behavior of the Boom clay, a new upward instrumented borehole was drilled above the ATLAS heater at

Elastic Deployable Composite Tubular Roll-Out Boom, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Deployable Space Systems (DSS) has developed an affordable and ultra-lightweight elastically self-deployable Roll-Out Boom technology that provides affordability and...

The marriage boom and marriage bust in the United States: An age-period-cohort analysis.

Science.gov (United States)

Schellekens, Jona

2017-03-01

In the 1950s and 1960s there was an unprecedented marriage boom in the United States. This was followed in the 1970s by a marriage bust. Some argue that both phenomena are cohort effects, while others argue that they are period effects. The study reported here tested the major period and cohort theories of the marriage boom and bust, by estimating an age-period-cohort model of first marriage for the years 1925-79 using census microdata. The results of the analysis indicate that the marriage boom was mostly a period effect, although there were also cohort influences. More specifically, the hypothesis that the marriage boom was mostly a response to rising wages is shown to be consistent with the data. However, much of the marriage bust can be accounted for by unidentified cohort influences, at least until 1980.

30 CFR 77.807-2 - Booms and masts; minimum distance from high-voltage lines.

Science.gov (United States)

2010-07-01

...-voltage lines. 77.807-2 Section 77.807-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.807-2 Booms and masts; minimum distance from high-voltage lines. The booms and masts of equipment operated on the surface of any...

Characterization of groundwater flow in the environment of the Boom Clay (Campine, Belgium)

International Nuclear Information System (INIS)

Gedeon, M.; Labat, S.; Wemaere, I.; Wouters, L.

2010-01-01

Document available in extended abstract form only. In Belgium, the Boom Clay formation is considered as reference host rock for the geological disposal of radioactive waste. Aquifers surrounding the Boom Clay play a passive role in the context of the disposal safety whereby the radionuclides are diluted by groundwater flow. The groundwater flow in these aquifers has been studied since decades. This research involves observations of groundwater levels in the regional and local piezo-metric networks, several site investigations including geophysics and core-drilled boreholes and groundwater modelling. In this context, groundwater modelling represents the integration of the site characterization efforts and provides a comprehensive tool for constraining the models used in the safety assessment of the geological disposal. Since 1985, groundwater levels are observed monthly in the regional piezo-metric network. It consists of 142 filters monitoring the groundwater levels at 45 sites. Along with the observed groundwater levels from the local piezo-metric network (concentrated around the Mol-Dessel site for surface disposal), these data provide an excellent insight into the evolution of the groundwater levels. Moreover, they represent a calibration (validation) dataset for groundwater flow modelling. The groundwater system forming the environment of the Boom Clay host rock was characterized during several site investigation campaigns, within which seven core-drilled boreholes were realized, whereby hydraulic parameters and hydro-stratigraphy of the groundwater system could be collected. The dataset obtained from the above mentioned campaigns was complemented by archived data on hydraulic testing in the aquifers in order to build a comprehensive groundwater model integrating these data into a single numerical representation of the groundwater system. Three regional groundwater models have been developed integrating the site characterization data collected in the north

Economic Booms and Risky Sexual Behavior: Evidence from Zambian Copper Mining Cities

OpenAIRE

Nicholas Wilson

2010-01-01

Existing studies suggest that individual and household level economic shocks affect the demand for and supply of risky sex. However, little evidence exists on the effects of an aggregate shock on equilibrium risky sexual behavior. This paper examines the effects of the early twenty-first century copper boom on risky sexual behavior in Zambian copper mining cities. The results indicate that the copper boom substantially reduced rates of transactional sex and multiple partnerships in copper min...

Real estate boom and export performance bust in Croatia

Directory of Open Access Journals (Sweden)

Marina Tkalec

2014-06-01

Full Text Available The goal of this research is to estimate the effect of resource reallocation from the manufacturing to the real estate economic sector on exporting activity in Croatia, a small open post-transition country that experienced a real estate boom during the previous decade. This paper follows the work by Égert and Kierzenkowski (2014 as we test the hypothesis that the real estate boom had an adverse impact on country’s export performance. For that purpose we use quarterly data ranging from 1Q1998 to 3Q2013, and estimate export equations using maximum likelihood and dynamic ordinary least squares estimators of cointegration. Our results indicate that the distortion of relative prices in favor of non-tradable sectors (construction and real estate, which is a direct by-product of the real estate boom, has had stifling effects on export performance. Our results also suggest that ailing cost competitiveness and governments’ inability to implement policies promoting private sector economic development adversely influenced export performance during the period analyzed. The basic conclusion of our research is that the expansion of a non-tradable sector in a country with limited supply of production factors can have a detrimental effect on the ability of the tradable sector to increase its output and compete in international markets.

Bearings for the biomass boom

Energy Technology Data Exchange (ETDEWEB)

MacQueen, Duncan

2011-03-15

Biomass energy is booming –– more than two billion people depend on biomass for their energy and the International Energy Agency predicts that biomass' share of the global energy supply will treble by 2050. But in many developing countries it is still regarded as a traditional and dirty solution that is often criminalised, unsustainable and poorly paid. A more sophisticated approach that legalises and secures sustainable production by and for local people could help improve energy security, cut carbon emissions, protect forests and reduce poverty.

The research and application of electricity economic boom model under the constraint of energy conservation and emission reduction

Science.gov (United States)

Chen, Guangyan; Xia, Huaijian; Chen, Meiling; Wang, Dong; Jia, Sujin

2017-10-01

Energy saving and emission reduction policies affects the development of high power industry, thereby affecting electricity demand, so the study of the electricity industry boom helps to master the national economy. This paper analyses the influence of energy saving and emission reduction on power generation structure and pollutant emission in power industry. Through the construction of electricity market composite boom index to indicate electricity boom, using boom index to study volatility characteristics and trend of electricity market. Here we provide a method for the enterprise and the government, that it can infer the overall operation of the national economy situation from power data.

Environmental Pollution: Noise Pollution - Sonic Boom. Volume I.

Science.gov (United States)

Defense Documentation Center, Alexandria, VA.

The unclassified, annotated bibliography is Volume I of a two-volume set on Noise Pollution - Sonic Boom in a series of scheduled bibliographies on Environmental Pollution. Volume II is Confidential. Corporate author-monitoring agency, subject, title, contract, and report number indexes are included. (Author/JR)

Effects of temperature and thermally-induced microstructure change on hydraulic conductivity of Boom Clay

Directory of Open Access Journals (Sweden)

W.Z. Chen

2017-06-01

Full Text Available Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex thermo-mechanical coupling conditions and to better understand the thermo-hydro-mechanical (THM coupling behaviour of Boom Clay, a series of permeability tests using temperature-controlled triaxial cell has been carried out on the Boom Clay samples taken from Belgian underground research laboratory (URL HADES. Due to its sedimentary nature, Boom Clay presents across-anisotropy with respect to its sub-horizontal bedding plane. Direct measurements of the vertical (Kv and horizontal (Kh hydraulic conductivities show that the hydraulic conductivity at 80 °C is about 2.4 times larger than that at room temperature (23 °C, and the hydraulic conductivity variation with temperature is basically reversible during heating–cooling cycle. The anisotropic property of Boom Clay is studied by scanning electron microscope (SEM tests, which highlight the transversely isotropic characteristics of intact Boom Clay. It is shown that the sub-horizontal bedding feature accounts for the horizontal permeability higher than the vertical one. The measured increment in hydraulic conductivity with temperature is lower than the calculated one when merely considering the changes in water kinematic viscosity and density with temperature. The nuclear magnetic resonance (NMR tests have also been carried out to investigate the impact of microstructure variation on the THM properties of clay. The results show that heating under unconstrained boundary condition will produce larger size of pores and weaken the microstructure. The discrepancy between the hydraulic conductivity experimentally measured and predicted (considering water viscosity and density changes with temperature can be attributed to the microstructural weakening effect on the thermal volume change

The regional economic impact of oil and gas extraction in Texas

International Nuclear Information System (INIS)

Lee, Jim

2015-01-01

This paper empirically investigates the regional economic impact of oil and gas extraction in Texas during the recent shale oil boom. Regressions with county-level data over the period 2009–2014 support smaller multiplier effects on local employment and income than corresponding estimates drawn from popular input–output-based studies. Economic impacts were larger for extraction from gas wells than oil wells, while the drilling phase generated comparable impacts. Estimates of economic impacts are greater in a dynamic spatial panel model that allows for spillover effects across local economies as well as over time. - Highlights: • Economic impacts and multiplier effects differ between oil and gas wells in Texas. • Interactions among local economies raise employment and income effects. • Impacts persist over time, raising the long-run multipliers. • Greater economic impacts from newly drilled wells than legacy wells.

The geochemical behaviour of selenium in the Boom Clay system - a XANES and EXAFS study

International Nuclear Information System (INIS)

2S, KULeuven, B-3001Leuven (Belgium))" data-affiliation=" (Center for surface Chemistry and Catalysis - M2S, KULeuven, B-3001Leuven (Belgium))" >Breynaert, Eric; 2S, KULeuven, B-3001Leuven (Belgium))" data-affiliation=" (Center for surface Chemistry and Catalysis - M2S, KULeuven, B-3001Leuven (Belgium))" >Dom, Dirk; 2S, KULeuven, B-3001Leuven (Belgium))" data-affiliation=" (Center for surface Chemistry and Catalysis - M2S, KULeuven, B-3001Leuven (Belgium))" >Vancluysen, Jacqueline; 2S, KULeuven, B-3001Leuven (Belgium))" data-affiliation=" (Center for surface Chemistry and Catalysis - M2S, KULeuven, B-3001Leuven (Belgium))" >Kirschhock, Christine E.A.; 2S, KULeuven, B-3001Leuven (Belgium))" data-affiliation=" (Center for surface Chemistry and Catalysis - M2S, KULeuven, B-3001Leuven (Belgium))" >Maes, Andre; Scheinost, Andreas C.

2010-01-01

Document available in extended abstract form only. In Belgium, the Boom Clay formation is studied as a reference host formation for the geological disposal of high-level and long-lived radioactive waste for more than 30 years. This formation mainly consists of mixed clay minerals (illite, inter-stratified illite-smectite), pyrite and immobile and dissolved natural organic matter. Since it provides good sorption capacities, very low permeability, and chemically reducing conditions due to the presence of pyrite (FeS 2 ), the Boom clay formation itself is considered to be the main barrier preventing radionuclide migration from the geological repository. Within this concept for geological storage Se 79 has been identified as one of the critical elements contributing to the final dose to man. Although the sorption and migration behaviour of Se in the Boom Clay system has been thoroughly studied, the speciation of Se in the Boom Clay system has never been identified spectroscopically. In all previous studies, the interpretation of the behaviour of Se in Boom Clay conditions has always been based on circumstantial evidence such as solubility measurements or comparison with the spectroscopically identified speciation of Se in model systems. Based on the XANES analysis, selenite is transformed into Se 0 confirming the previously proposed reduction of selenite in the Boom Clay system. Combination of the mass-balance for Se with the results from linear combination analysis of the XANES spectra provided new evidence for the sorption-reduction mechanism proposed to explain the interaction between Se(IV) and the BC solid phase. In addition, evidence was found that that the fate of Se(IV) in the BC system is completely dominated by its interaction with pyrite present in the Boom Clay. The combined EXAFS analysis of Se in Se 0 reference phases (hexagonal, monoclinic, Se-loaded pyrite) allowed to elucidate further details on the short-range structure of the reaction products formed

Boom in boarfish abundance: insight from otolith analysis

DEFF Research Database (Denmark)

Coad, Julie Olivia; Hüssy, Karin

2012-01-01

The boarfish Capros aper is a pelagic shoaling species widely distributed along the Northeast Atlantic continental shelf. In recent years, this species has experienced a dramatic boom in abundance in the Bay of Biscay and Celtic Sea. This study aims at resolving the mechanisms responsible for thi...

Microbial consortia in mesocosm bioremediation trial using oil sorbents, slow-release fertilizer and bioaugmentation.

Science.gov (United States)

Gertler, Christoph; Gerdts, Gunnar; Timmis, Kenneth N; Golyshin, Peter N

2009-08-01

An experimental prototype oil boom including oil sorbents, slow-release fertilizers and biomass of the marine oil-degrading bacterium, Alcanivorax borkumensis, was applied for sorption and degradation of heavy fuel oil in a 500-L mesocosm experiment. Fingerprinting of DNA and small subunit rRNA samples for microbial activity conducted to study the changes in microbial communities of both the water body and on the oil sorbent surface showed the prevalence of A. borkumensis on the surface of the oil sorbent. Growth of this obligate oil-degrading bacterium on immobilized oil coincided with a 30-fold increase in total respiration. A number of DNA and RNA signatures of aromatic hydrocarbon-degrading bacteria were detected both in samples of water body and on oil sorbent. Ultimately, the heavy fuel oil in this mesocosm study was effectively removed from the water body. This is the first study to successfully investigate the fate of oil-degrading microbial consortia in an experimental prototype for a bioremediation strategy in offshore, coastal or ship-bound oil spill mitigation using a combination of mechanical and biotechnological techniques.

A Boom in Boomerangs

Science.gov (United States)

1992-01-01

Ted Bailey, a highly-ranked international boomerang designer and thrower, used information from a variety of NASA technical reports on aerodynamics and low-speed airfoils to design more competitive boomerangs. Because the boomerang is essentially an airfoil like an airplane wing, the technology transferred effectively and even contributed to the 1981 American victory over Australian throwers. In 1985, using four NASA reports, Bailey designed a new MTA (maximum time aloft) boomerang that broke the one-minute barrier, enabled throwers to throw and catch in less than three minutes and allowed competitors to complete the difficult "Super Catch" - five throw/catch sequences after launching the original boom while it is still aloft. Bailey is now considering other boomerang applications.

The Effects of Oil Price Shocks on real GDP in Iran

Directory of Open Access Journals (Sweden)

Mohammad Taghi Khosravi Larijani

2013-09-01

Full Text Available In this paper, the asymmetric effects of oil price shocks on GDP have been investigated by co-integration analysis in Iran economy during the period 1960-2010. We used Hodrick-Prescott filtering to separate positive shocks from negative shocks. The results showed that in long run the negative shocks have stronger effects on output than positive ones that can have damaging repercussions on economic growth. The findings have practical policy implications for decision makers in the area of macroeconomic planning. The use of stabilization and savings funds and diversification of the real sector seems crucial to minimize the harmful effects of oil booms and busts

On the thermal behaviour of Boom clay

International Nuclear Information System (INIS)

Delage, P.; Cui Yu Jun; Sultan, N.

2004-01-01

When temperature is increased, the various phenomena that occur in a saturated natural potential host clay for nuclear waste disposal (Boom clay from SCK-CEN in Mol, Belgium) were experimentally investigated in a temperature controlled high stress triaxial cell. Firstly, the pore pressure build-up due to the difference in thermal dilation of both water and minerals was investigated through thermal consolidation tests. Interesting information was obtained about the dissipation of thermally induced pore pressure in Boom clay, based on the standard Terzaghi consolidation theory. Secondly, the volume change behaviour in drained conditions (i.e. under a very slow temperature increase) confirmed that the clay overconsolidation ratio (OCR) controlled the nature of the volume changes. Whereas overconsolidated soils use to dilate as any material when temperature is elevated, normally consolidated soils present a decrease in volume, which is less common. The principles of a coupled thermo-elasto-plastic model that was specifically developed to model this particular behaviour are finally presented. Obviously, it appears necessary to account in detail for these thermal phenomena in order to properly understand the response of the geological barrier in the near field once nuclear waste has been stored. (orig.)

Analysis of Offshore Knuckle Boom Crane - Part Two: Motion Control

Directory of Open Access Journals (Sweden)

Morten K. Bak

2013-10-01

Full Text Available In this paper design of electro-hydraulic motion control systems for offshore knuckle boom cranes is discussed. The influence of the control valve bandwidth along with the ramp time for the control signal are investigated both analytically with simplified system models and numerically with an experimentally verified crane model. The results of both types of investigations are related to general design rules for selection of control valves and ramp times and the relevance of these design rules is discussed. Generally, they are useful but may be too conservative for offshore knuckle boom cranes. However, as demonstrated in the paper, the only proper way to determine this is to evaluate the motion control system design by means of simulation.

Pilot Test of a Novel Method for Assessing Community Response to Low-Amplitude Sonic Booms

Science.gov (United States)

Fidell, Sanford; Horonjeff, Richard D.; Harris, Michael

2012-01-01

A pilot test of a novel method for assessing residents annoyance to sonic booms was performed. During a two-week period, residents of the base housing area at Edwards Air Force Base provided data on their reactions to sonic booms using Smartphone-based interviews. Noise measurements were conducted at the same time. The report presents information about data collection methods and about test participants reactions to low-amplitude sonic booms. The latter information should not be viewed as definitive for several reasons. It may not be reliably generalized to the wider U.S. residential population (because it was not derived from a representative random sample) and the sample itself was not large.

Report on the oil and gas sector in Ecuador

International Nuclear Information System (INIS)

1990-01-01

After a brief introduction on the economic and political situation in Ecuador, the state of the country's oil and gas sector is reviewed. Before 1967, all oil came from wells along the Pacific coast, but with discoveries in the Amazon Basin, the opening of the trans-Ecuador pipeline, and creation of the state oil company CEPE (renamed Petroecuador in 1990) by the early 1970s, a boom in the industry occurred. Current proven reserves stand at 1.2-1.5 billion bbl of oil and 140 billion ft 3 of natural gas. Current production is generally around 300,000 bbl/d, mostly from the Petroecuador-Texaco consortium block in the Amazon Basin. Petroecuador now operates the main oil export pipeline and has subsidiaries responsible for exploration and production, refining, and the marketing of petroleum and its derivatives. In recent years Petroecuador has imported about $60 million worth of goods annually, offering a market opportunity for foreign companies supplying goods and services to the oil and gas industry. Market opportunities of interest to Canadian companies are outlined, local procedures for doing business are presented, and lists of Canadian and Ecuadorian contacts are provided. 3 figs., 5 tabs

Simplified High-Performance Roll Out Composite Magnetometer Boom, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In response to NASA's need for compact, low-cost deployable magnetometer booms for CubeSats, Roccor proposes to develop a Simple High-performance Roll-Out Composite...

Passenger Spaceplanes and Airplanes that Have Variable Configuration for Sonic Boom Reduction

Directory of Open Access Journals (Sweden)

Constantin SANDU

2018-06-01

Full Text Available In the last time, the interest for passenger space plane, supersonic passenger aircraft and supersonic business jets is increasing. For reducing sonic boom effects at ground level, some companies proposed airplanes having fuselage with small traversal section or having curved fuselage. This paper presents a new practical method for exciting vibrations in the leading edge of wing, tail and airplane's nose surfaces in order to scatter the shock wave and to reduce the sonic boom impact at ground level. The leading edges of wing, tail and airplane nose are covered with thin elastic fairings made of carbon fiber composite material which are separated through small gaps by the adjacent surfaces of wing, tail and nose. When the aircraft flies over populated areas, compressed air bleed from the engine compressors excites the vibration of carbon fiber fairings. The air is released through calibrated nozzles and directly impinges on the fairing surface generating their vibration. Thus, the shock waves are scattered and the impact of sonic boom on ground is much reduced.

Method of Obtaining High Resolution Intrinsic Wire Boom Damping Parameters for Multi-Body Dynamics Simulations

Science.gov (United States)

Yew, Alvin G.; Chai, Dean J.; Olney, David J.

2010-01-01

The goal of NASA's Magnetospheric MultiScale (MMS) mission is to understand magnetic reconnection with sensor measurements from four spinning satellites flown in a tight tetrahedron formation. Four of the six electric field sensors on each satellite are located at the end of 60- meter wire booms to increase measurement sensitivity in the spin plane and to minimize motion coupling from perturbations on the main body. A propulsion burn however, might induce boom oscillations that could impact science measurements if oscillations do not damp to values on the order of 0.1 degree in a timely fashion. Large damping time constants could also adversely affect flight dynamics and attitude control performance. In this paper, we will discuss the implementation of a high resolution method for calculating the boom's intrinsic damping, which was used in multi-body dynamics simulations. In summary, experimental data was obtained with a scaled-down boom, which was suspended as a pendulum in vacuum. Optical techniques were designed to accurately measure the natural decay of angular position and subsequently, data processing algorithms resulted in excellent spatial and temporal resolutions. This method was repeated in a parametric study for various lengths, root tensions and vacuum levels. For all data sets, regression models for damping were applied, including: nonlinear viscous, frequency-independent hysteretic, coulomb and some combination of them. Our data analysis and dynamics models have shown that the intrinsic damping for the baseline boom is insufficient, thereby forcing project management to explore mitigation strategies.

A study of sonic boom overpressure trends with respect to weight, altitude, Mach number, and vehicle shaping

Science.gov (United States)

Needleman, Kathy E.; Mack, Robert J.

1990-01-01

This paper presents and discusses trends in nose shock overpressure generated by two conceptual Mach 2.0 configurations. One configuration was designed for high aerodynamic efficiency, while the other was designed to produce a low boom, shaped-overpressure signature. Aerodynamic lift, sonic boom minimization, and Mach-sliced/area-rule codes were used to analyze and compute the sonic boom characteristics of both configurations with respect to cruise Mach number, weight, and altitude. The influence of these parameters on the overpressure and the overpressure trends are discussed and conclusions are given.

China Oil and Gas Market Assessment

International Nuclear Information System (INIS)

Qiu, Yu

2004-08-01

China, with one-fifth of the world's population and one of the fastest rates of economic growth, is experiencing a boom in its energy requirements. China has been identified as a high priority market for the oil and gas sector. This priority has resulted in the high level of investment and many large-scale projects related to the oil and gas industry. Oil production from existing fields is expected to increase, new oil and gas fields will be developed, and the country's oil and gas transmission infrastructure will be extended to meet domestic demands. In addition, total domestic investment needs for the next three decades till 2030 are estimated at around $119 billion, and upstream exploration and development will account for about $69 billion. China's oil and gas exploitation business has been the biggest beneficiary of the bearish crude oil prices, national oil stockpile and the need of infrastructure. In the first six-month period of 2005, this industry has gained a profit of USD16.5 billion, up 73.4 per cent year-on-year. The country is becoming increasingly open to international oil companies, contractors and equipment suppliers, who can bring advanced technology, equipment, and management experience. In this context, considerable opportunities in the supply and service sectors are open to Dutch companies. This report analyses the present situation and market prospect of China upstream oil and gas industry, including: Current status of Chinese oil and gas industry analysis and future development forecast; Potential customers analysis, such as three stated-owned oil companies and their foreign partners;Domestic and foreign competitors analysis; Potential opportunities and challenges analysis; Providing contacts and information on main ongoing oil exploration and development projects, and business practices

The effects of nutritional factors on absorption, retention and excretion of organic and inorganic mercury in mice and rats

International Nuclear Information System (INIS)

Gjedsted Hoejbjerg, S.

1995-01-01

The industrial use of mercury compounds is declining, but naturally occurring mercury always exists. Earlier experiments have demonstrated effects of dietary fibres, high protein diets and dry milk on whole-body retention and relative organ distribution of orally and intraperitoneally administered methylmercy chloride and mercuric chloride were determined in female NMRI/born mice fed semisynthetic diets in which the energy contribution from protein (soy protein, caseinate or fish protein), or from lipids (coconut oil, cod liver oil, or soy oil), was varied or to which different amounts and types of dietary fibres (cellulose, 60% fibre tablet, pectin K, oat, corn and soy fibre) were added. The whole-body retention of both organic and inorganic mercury depended on the diet composition. Thus, highly significant reductions in whole-body retention of mercury were observed in groups of mice orally administered methylmercury chloride and fed diets with cod liver oil as lipid energy source, or diets with high amounts of soy protein or fish protein as protein energy source, compared to groups fed diets with coconut oil, soy oil, caseinate and lower amounts of fish or soy protein. In most cases, the relative organ distribution was not significantly affected by the diet composition, except that the fractional mercury deposition in the brain was increased in the groups receiving high amounts of cod liver oil compared to the group fed high amounts of coconut oil. (au) 112 p

Desolventizing of Jatropha curcas oil from azeotropes of solvents using ceramic membranes.

Science.gov (United States)

Carniel, Naira; Zabot, Giovani L; Paliga, Marshall; Mignoni, Marcelo L; Mazutti, Marcio A; Priamo, Wagner L; Oliveira, J V; Di Luccio, Marco; Tres, Marcus V

2017-12-01

The separation of Jatropha curcas oil from azeotropes of ethyl alcohol-n-hexane and isopropyl alcohol-n-hexane using ceramic membranes with different cutoffs (5, 10 and 20 kDa) is presented. The mass ratios of oil:azeotropes (O:S) studied were 1:3 for feeding pressures of 0.1, 0.2 and 0.3 MPa, and 1:1 for the feeding pressure of 0.1 MPa. Isopropyl alcohol was the best solvent for the membranes conditioning to permeate n-hexane (240 kg/m 2  h). In the separation of J. curcas oil and azeotropes of solvents, both membranes showed oil retention and total flux decreases with time. Overall, the lowest decrease in the retentions was reached in the 5 kDa membrane, while the lowest decrease in the total flux was reached in the 20 kDa. In the separation of oil and ethyl alcohol-n-hexane azeotrope, the best retention at 60 min of the process was equal to 17.3 wt% in the 20 kDa membrane at 0.3 MPa and O:S ratio equalled to 1:3. In this condition, the total permeate flux was 17.5 kg/m 2  h. Different retentions and permeabilities are provided when changing the O:S ratio, the feeding pressure and the molecular weight cutoff of membranes.

The Control of Welding Deformation of the Three-Section Arm of Placing Boom of HB48B Pump Truck

Science.gov (United States)

Wang, Zhi-ling

2018-02-01

The concrete pump truck is the construction equipment of conveying concrete with self contained base plate and distributing boom. It integrates the pump transport mechanism of the concrete pump, and the hydraulic roll-folding type distributing boom used to distribute materials, and the supporting mechanism into the automobile chassis, and it is the concrete conveying equipment with high efficient and the functions of driving, pumping, and distributing materials. The placing boom of the concrete pump truck is the main force member in the pump parts with bearing great pressure, and its stress condition is complex. Taking the HB48B placing boom as an example, this paper analyzes and studies the deformation produced by placing boom of pump truck, and then obtains some main factors affecting the welding deformation. Through the riveter “joint” size, we controlled the process parameters, post-welding processing, and other aspects. These measures had some practical significance to prevent, control, and reduce the deformation of welding.

Radionuclide solubilities in boom clay. Final report, part 2 : a report produced for ONDRAF/NIRAS

International Nuclear Information System (INIS)

Baker, S.; Baston, G.M.N.; Boult, K.A.

2000-01-01

The release of radionuclides from a High Level Radioactive Waste repository situated in the Boom Clay at Mol would depend, in part, on their retardation within the Boom Clay. A number of parameters are required to assess such retardation; these include the solubilities of key radionuclides and their sorption behaviour. ONDRAF/NIRAS has identified neptunium, technetium, selenium, uranium and plutonium as elements for study. AEA Technology plc was requested to undertake a joint experimental and modelling study to determine the solubilities of these five elements under conditions representative of those in the Boom Clay (the in situ chemical conditions are pH∼8, Eh ∼ -230 mV). The work programme was carried out over three years, and for completeness this final report includes all the results

Beyond the low-skill equilibrium? A case study of the local content policy in the Brazilian oil and gas industry

OpenAIRE

Melby, Maria

2015-01-01

This master thesis wishes to explore the labor market in the Brazilian oil and gas industry during the peak years of the oil boom, seen from Norwegian multinational companies (MNC) point of view. The theoretical perspective applied in the analysis is the hierarchical market economy (HME) typology, deriving from the varieties of capitalism (VOC) framework. In HMEs, the low-skill equilibrium is a prominent feature, in which none of the actors involved has incentives to invest in education and ...

Oil and development in Brazil: Between an extractive and an industrialization strategy

International Nuclear Information System (INIS)

Paz, M. José

2014-01-01

In the wake of the commodity boom, “new development strategies” in Latin America are centering on the industrialization of natural resources, thereby questioning the “resource curse” thesis and linking the economic performance of this activity with the institutional framework. In this context, the aim of this paper focusing on the Brazilian oil sector is to analyze the implementation of a resource-based industrialization strategy. After analyzing the Brazilian institutional framework and identifying the key features of a resource-based industrialization strategy, we assess its development and identify its scope and limitations. - Highlights: • We analyze the Brazilian oil sector’s institutional framework. • We analyze the influence of the institutional framework in the Brazilian oil sector performance. • We identify the key features of a resource-based industrialization strategy. • We assess the performance of the Brazilian oil sector and, in particular, its industrialization path

Leading the next boom? competitive Eastern limb platinum supply

CSIR Research Space (South Africa)

McGill, JE

2010-07-01

Full Text Available in USD/troy oz (Data source: Johnson Matthey) Figure 4. Variation in nominal PGEs spot price from July 1992 till July 2010 in USD/troy oz (Data source: Johnson Matthey) PLATINUM IN TRANSITION ?BOOM OR BUST?4 each. In 1996 and 2003 merger attempts...

The New Oil Sector and the Dutch Disease: the Case of Ghana

Directory of Open Access Journals (Sweden)

Dennis Nchor

2015-01-01

Full Text Available This paper investigates the impact of the new oil sector on the economic performance of major traditional sectors of the Ghanaian economy. The discovery of resource booming sectors in most countries often comes with several opportunities as well as challenges. Ghana discovered oil in 2007 and started subsequent commercial production and export in 2010. The results from the study show that, there is no clear case of declining performance of sectors in terms of output, growth and export earnings as a result of the oil production. The study could also not establish a sustained appreciation in the real effective exchange rate since commercial oil production commenced which is an indicator of the presence of the Dutch Disease phenomenon. The real effective exchange rate was also found to be highly influenced by oil production, oil prices, total exports and remittances. The study applied an autoregressive distributed lag model due to differences in the level of integration of variables. The data was obtained from the Bank of Ghana, the Ministry of Finance in Ghana and the Energy Information Administration.

The Iron Law of Financial Markets: Self-fulfilling Prophecies and Speculative Booms and Busts

Directory of Open Access Journals (Sweden)

Ognjen Radonjić

2016-02-01

Full Text Available This paper discusses the factors which, in the absence of strong financial regulation, sustain the Iron Law of the Financial Markets asserting that speculative booms and busts occur more or less regularly from 17 century to the present. The first factor is that financial markets are self-fulfilling system. The second is that human nature does not change and is based on egoism, materialism, loss aversion, exaggerated hopes and fears, emulation, propensity to gamble, herd behavior and so on. Lastly, there is the extreme brevity of the financial memory. In order to enable economic authorities and/or individuals to detect timely that the unsustainable boom is under the way, we have identified the common features of historically recorded speculative episodes. Stages through which the system passes on its way from unsustainable rise to inevitable fall are: displacement, boom, overtrading, financial distress and discredit or revulsion.

Radionuclide solubilities in boom clay. Final report, part 2 : a report produced for ONDRAF/NIRAS

Energy Technology Data Exchange (ETDEWEB)

Baker, S.; Baston, G.M.N.; Boult, K.A. [and others

2000-07-01

The release of radionuclides from a High Level Radioactive Waste repository situated in the Boom Clay at Mol would depend, in part, on their retardation within the Boom Clay. A number of parameters are required to assess such retardation; these include the solubilities of key radionuclides and their sorption behaviour. ONDRAF/NIRAS has identified neptunium, technetium, selenium, uranium and plutonium as elements for study. AEA Technology plc was requested to undertake a joint experimental and modelling study to determine the solubilities of these five elements under conditions representative of those in the Boom Clay (the in situ chemical conditions are pH{approx}8, Eh {approx} -230 mV). The work programme was carried out over three years, and for completeness this final report includes all the results.

Physical model of a floating trash boom to control aquatic weeds at the TVA Widows Creek Fossil Plant

International Nuclear Information System (INIS)

Hopping, P.N.

1991-01-01

This paper reports that the Tennessee Valley Authority (TVA) Widows Creek Fossil plant seasonally encounters adverse accumulations of aquatic weeds at the intakes of the condenser cooling water pumps. To reduce the accumulations, a floating trash boom has been proposed for the intakes. To evaluate the hydraulic feasibility of a boom, a physical model of the intakes has been built at the TVA Engineering Laboratory. The model was used to determine the boom alignment and depth of skimming needed to successfully deflect weeds away from the intakes and provide self-cleaning

Prisons as Panacea or Pariah? The Countervailing Consequences of the Prison Boom on the Political Economy of Rural Towns

Directory of Open Access Journals (Sweden)

John M. Eason

2017-01-01

Full Text Available The nascent literature on prison proliferation in the United States typically reveals negative impacts for communities of color. Given that Southern rural communities were the most likely to build during the prison boom (1970–2010, however, a more nuanced understanding of prison impact is warranted. Using a dataset matching and geocoding all 1663 U.S. prisons with their Census-appointed place, this study explores the countervailing consequences of the prison boom on rural towns across multiple periods. For example, locales that adopted prisons at earlier stages of the prison boom era received a short-term boom compared to those that did not, but these effects were not lasting. Furthermore, later in the boom, prison-building protected towns against additional economic decline. Thus, neither entirely pariah nor panacea, the prison functions as a state-sponsored public works program for disadvantaged rural communities but also supports perverse economic incentives for prison proliferation. Methodological, substantive, theoretical, and policy implications regarding the intersection of race and punishment are explored.

Investigating the pore-water chemistry effects on the volume change behaviour of Boom clay

Science.gov (United States)

Deng, Y. F.; Cui, Y. J.; Tang, A. M.; Nguyen, X. P.; Li, X. L.; Van Geet, M.

The Essen site has been chosen as an alternative site for nuclear waste disposal in Belgium. The soil formation involved at this site is the same as at Mol site: Boom clay. However, owing to its geographical situation closer to the sea, Boom clay at Essen presents a pore water salinity 4-5 times higher than Boom clay at Mol. This study aims at studying the effects of pore water salinity on the hydro-mechanical behaviour of Boom clay. Specific oedometer cells were used allowing “flushing” the pore water in soil specimen by synthetic pore water or distilled water. The synthetic pore water used was prepared with the chemistry as that for the site water: 5.037 g/L for core Ess83 and 5.578 g/L for core Ess96. Mechanical loading was then carried out on the soil specimen after flushing. The results show that water salinity effect on the liquid limit is negligible. The saturation or pore water replacement under the in situ effective stress of 2.4 MPa does not induce significant volume change. For Ess83, hydro-mechanical behaviour was found to be slightly influenced by the water salinity; on the contrary, no obvious effect was identified on the hydro-mechanical behaviour of Ess96. This can be attributed to the higher smectite content in Ess83 than in Ess96.

Remedial investigation work plan for Bear Creek Valley Operable Unit 1 (S-3 Ponds, Boneyard/Burnyard, Oil Landfarm, Sanitary Landfill I, and the Burial Grounds, including Oil Retention Ponds 1 and 2) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

International Nuclear Information System (INIS)

1994-03-01

This document refers to data concerning the Environmental Restoration Program implemented at the Oak Ridge Y-12 plant. Topics discussed include: Remediation plans for the burial grounds, sanitary landfill I, oil retention ponds, S-3 ponds, and the boneyard/burnyard at Y-12. This document also contains information about the environmental policies regulating the remediation

Prediction of retention indices for frequently reported compounds of plant essential oils using multiple linear regression, partial least squares, and support vector machine.

Science.gov (United States)

Yan, Jun; Huang, Jian-Hua; He, Min; Lu, Hong-Bing; Yang, Rui; Kong, Bo; Xu, Qing-Song; Liang, Yi-Zeng

2013-08-01

Retention indices for frequently reported compounds of plant essential oils on three different stationary phases were investigated. Multivariate linear regression, partial least squares, and support vector machine combined with a new variable selection approach called random-frog recently proposed by our group, were employed to model quantitative structure-retention relationships. Internal and external validations were performed to ensure the stability and predictive ability. All the three methods could obtain an acceptable model, and the optimal results by support vector machine based on a small number of informative descriptors with the square of correlation coefficient for cross validation, values of 0.9726, 0.9759, and 0.9331 on the dimethylsilicone stationary phase, the dimethylsilicone phase with 5% phenyl groups, and the PEG stationary phase, respectively. The performances of two variable selection approaches, random-frog and genetic algorithm, are compared. The importance of the variables was found to be consistent when estimated from correlation coefficients in multivariate linear regression equations and selection probability in model spaces. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The essential oil in lamina and petiole of heracleum-dissectum leaves

NARCIS (Netherlands)

Montanarella, L; Bos, R; Fisher, FC

The essential oils of lamina and petiole of Heracleum dissectum are described. Fifty-seven compounds have been identified by mass spectrometry and retention indices. Differences between the oils of the two organs were mainly quantitative.

Seagrass Control Project: Containment Boom Evaluation. A Method to Protect Seawater Intakes from Seagrass Accumulation.

Science.gov (United States)

1983-10-01

containment booms at other mooring sites with significantly different physical and environ- mental conditions is recommended before full-scale application...deployment pattern for the different ship types. Modified procedures may also be needed to deploy the boom under a different set of physical and environmental... STPM Press Publ. New York, 353pp. 1980. Pulich, W., S. Barnes and P. Parker. Trace metal cycles in seagrass communities. pp 493-506 in M. Wiley, ed

Modeling and simulation of the agricultural sprayer boom leveling system

KAUST Repository

Sun, Jian; Miao, Yubin

2011-01-01

According to the agricultural precision requirements, the distance from sprayer nozzles to the corps should be kept between 50 cm to 70 cm. The sprayer boom also needs to be kept parallel to the field during the application process. Thus we can

Experimental Investigation of a Large-Scale Low-Boom Inlet Concept

Science.gov (United States)

Hirt, Stefanie M.; Chima, Rodrick V.; Vyas, Manan A.; Wayman, Thomas R.; Conners, Timothy R.; Reger, Robert W.

2011-01-01

A large-scale low-boom inlet concept was tested in the NASA Glenn Research Center 8- x 6- foot Supersonic Wind Tunnel. The purpose of this test was to assess inlet performance, stability and operability at various Mach numbers and angles of attack. During this effort, two models were tested: a dual stream inlet designed to mimic potential aircraft flight hardware integrating a high-flow bypass stream; and a single stream inlet designed to study a configuration with a zero-degree external cowl angle and to permit surface visualization of the vortex generator flow on the internal centerbody surface. During the course of the test, the low-boom inlet concept was demonstrated to have high recovery, excellent buzz margin, and high operability. This paper will provide an overview of the setup, show a brief comparison of the dual stream and single stream inlet results, and examine the dual stream inlet characteristics.

Political economic origins of Sekondi-Takoradi, West Africa’s new oil city

Directory of Open Access Journals (Sweden)

Franklin Obeng-Odoom

2012-01-01

Full Text Available The origins, growth and trajectory of Sekondi-Takoradi, West Africa’s newest oil city, are considered by using an “institutional-analytical” method of economic history. Particular attention is given to the role of ports, harbours and railways, and how they evolved and interacted with political economic institutions in the last 100 years. This omnibus historical analysis suggests that West Africa’s newest oil city has come full circle. Its contemporary stature in national and international circles has a historical parallel in the 1920s when, as now, it captured national, regional and international attention. The evidence suggests that contemporary narratives that strike a determinist relationship between resource boom and social doom need to be reconsidered.

Thermomechanical behaviour of boom clay

International Nuclear Information System (INIS)

Sultan, N.; Delage, P.; Cui, Y.J.

2000-01-01

Special attention has been recently paid on temperature effects on the behaviour of deep saturated clays, in relation with nuclear deep waste storage. However, few experimental data are presently available, and existing constitutive models need to be completed. This note is aimed at completing, both experimentally and theoretically, the understanding of the effects of the over-consolidation ration on the thermal volume changes of Boom clay (Belgium). The experimental data obtained here are in a good agreement with existing data. As a complement to existing data, they are used to develop a new elastoplastic model. The adoption of a second coupled plastic mechanism provides good simulations on a complex thermo-mechanical path. (authors)

In situ chemical osmosis experiment in the Boom Clay at the Mol underground research laboratory

Science.gov (United States)

Garavito, A. M.; De Cannière, P.; Kooi, H.

Studies on the compatibility of Boom Clay with large amounts of nitrate- bearing bituminized radioactive waste have recently raised a particular interest for osmosis-induced effects in this reference formation in Belgium. Indeed, water flow and solute transport may be associated with several types of driving forces, or gradients (chemical, electrical, thermal), in addition to the hydraulic forces, resulting in the so-called coupled flows. Fluid flow caused by driving forces different than hydraulic gradients is referred to as osmosis. Chemical osmosis, the water flow induced by a chemical gradient across a semi-permeable membrane, can generate pressure increase. The question thus arises if there is a risk to create high pore pressures that could damage the near-field of medium-level waste (MLW) galleries, if osmotically driven water flows towards the galleries are produced by the release of large amounts of NaNO 3 (750 t) in the formation. To what extent a low-permeability clay formation such as the Boom Clay acts as an osmotic membrane is thus a key issue to assess the relevance of osmosis phenomena for the disposal of medium-level waste. An in situ osmosis experiment has been conducted at the H ADES underground research laboratory to determine the osmotic efficiency of Boom Clay at the field scale. A recently developed chemical osmosis flow continuum model has been used to design the osmosis experiment, and to interpret the water pressure measurements. Experimental data could be reproduced quite accurately by the model, and the inferred parameter values are consistent with independent determinations for Boom Clay. A rapid water pressure increase (but limited to about a 2 m water column) was observed after 12 h in the filter containing the more saline water. Then, the osmotically induced water pressure slowly decays on several months. So, the experimental results obtained in situ confirm the occurrence of non-hydraulic flow phenomena (chemical osmosis) in a low

Modelling the impact of oil prices on Vietnam's stock prices

International Nuclear Information System (INIS)

Narayan, Paresh Kumar; Narayan, Seema

2010-01-01

The goal of this paper is to model the impact of oil prices on Vietnam's stock prices. We use daily data for the period 2000-2008 and include the nominal exchange rate as an additional determinant of stock prices. We find that stock prices, oil prices and nominal exchange rates are cointegrated, and oil prices have a positive and statistically significant impact on stock prices. This result is inconsistent with theoretical expectations. The growth of the Vietnamese stock market was accompanied by rising oil prices. However, the boom of the stock market was marked by increasing foreign portfolio investment inflows which are estimated to have doubled from US$0.9 billion in 2005 to US$1.9 billion in 2006. There was also a change in preferences from holding foreign currencies and domestic bank deposits to stocks local market participants, and there was a rise in leveraged investment in stock as well as investments on behalf of relatives living abroad. It seems that the impact of these internal and domestic factors were more dominant than the oil price rise on the Vietnamese stock market. (author)

Hydraulic fracturing in shales: the spark that created an oil and gas boom

Science.gov (United States)

Olson, J. E.

2017-12-01

In the oil and gas business, one of the valued properties of a shale was its lack of flow capacity (its sealing integrity) and its propensity to provide mechanical barriers to hydraulic fracture height growth when exploiting oil and gas bearing sandstones. The other important property was the high organic content that made shale a potential source rock for oil and gas, commodities which migrated elsewhere to be produced. Technological advancements in horizontal drilling and hydraulic fracturing have turned this perspective on its head, making shale (or other ultra-low permeability rocks that are described with this catch-all term) the most prized reservoir rock in US onshore operations. Field and laboratory results have changed our view of how hydraulic fracturing works, suggesting heterogeneities like bedding planes and natural fractures can cause significant complexity in hydraulic fracture growth, resulting in induced networks of fractures whose details are controlled by factors including in situ stress contrasts, ductility contrasts in the stratigraphy, the orientation and strength of pre-existing natural fractures, injection fluid viscosity, perforation cluster spacing and effective mechanical layer thickness. The stress shadowing and stress relief concepts that structural geologists have long used to explain joint spacing and orthogonal fracture pattern development in stratified sequences are key to understanding optimal injection point spacing and promotion of more uniform length development in induced hydraulic fractures. Also, fracture interaction criterion to interpret abutting vs crossing natural fracture relationships in natural fracture systems are key to modeling hydraulic fracture propagation within natural fractured reservoirs such as shale. Scaled physical experiments provide constraints on models where the physics is uncertain. Numerous interesting technical questions remain to be answered, and the field is particularly appealing in that better

Design of an Indoor Sonic Boom Simulator at NASA Langley Research Center

Science.gov (United States)

Klos, Jacob; Sullivan, Brenda M.; Shepherd, Kevin P.

2008-01-01

Construction of a simulator to recreate the soundscape inside residential buildings exposed to sonic booms is scheduled to start during the summer of 2008 at NASA Langley Research Center. The new facility should be complete by the end of the year. The design of the simulator allows independent control of several factors that create the indoor soundscape. Variables that will be isolated include such factors as boom duration, overpressure, rise time, spectral shape, level of rattle, level of squeak, source of rattle and squeak, level of vibration and source of vibration. Test subjects inside the simulator will be asked to judge the simulated soundscape, which will represent realistic indoor boom exposure. Ultimately, this simulator will be used to develop a functional relationship between human response and the sound characteristics creating the indoor soundscape. A conceptual design has been developed by NASA personnel, and is currently being vetted through small-scale risk reduction tests that are being performed in-house. The purpose of this document is to introduce the conceptual design, identify how the indoor response will be simulated, briefly outline some of the risk reduction tests that have been completed to vet the design, and discuss the impact of these tests on the simulator design.

Credit Booms and Busts in Emerging Markets: The Role of Bank Governance and Risk Management

OpenAIRE

Brown, Martin; Andries, Alin Marius

2014-01-01

This paper investigates to what extent risk management and corporate governance mitigate the involvement of banks in credit boom and bust cycles. Using a unique, hand-collected dataset on 156 banks from Central and Eastern Europe during 2005-2012, we assess whether banks with stronger risk management and corporate governance display more moderate credit growth in the pre-crisis credit boom as well as a smaller credit contraction and fewer credit losses in the crisis period. With respect to ba...

Computed Tomographic-Guided Radiofrequency Ablation of Recurrent or Residual Hepatocellular Carcinomas around Retained Iodized Oil after Transarterial Chemoembolization

Energy Technology Data Exchange (ETDEWEB)

Koh, Young Hwan [Center for Liver Cancer, National Cancer Center, Goyang 410-769 (Korea, Republic of); Department of Radiology, Research Institute and Hospital, National Cancer Center, Goyang 410-769 (Korea, Republic of); Choi, Joon-Il [Center for Liver Cancer, National Cancer Center, Goyang 410-769 (Korea, Republic of); Department of Radiology, Research Institute and Hospital, National Cancer Center, Goyang 410-769 (Korea, Republic of); Department of Radiology, Seoul St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Seoul 137-701 (Korea, Republic of); Kim, Hyun Beom [Center for Liver Cancer, National Cancer Center, Goyang 410-769 (Korea, Republic of); Department of Radiology, Research Institute and Hospital, National Cancer Center, Goyang 410-769 (Korea, Republic of); Kim, Min Ju [Department of Radiology, Research Institute and Hospital, National Cancer Center, Goyang 410-769 (Korea, Republic of)

2013-07-01

To assess the clinical efficacy, safety, and risk factors influencing local tumor progression, following CT-guided radiofrequency ablation (RFA) of recurrent or residual hepatocellular carcinoma (HCC), around iodized oil retention. Sixty-four patients (M : F = 51 : 13, 65.0 ± 8.2 years old) with recurrent or residual HCC (75 index tumors, size = 14.0 ± 4.6 mm) had been treated by CT-guided RFA, using retained iodized oil as markers for targeting. The technical success, technique effectiveness rate and complications of RFA were then assessed. On pre-ablative and immediate follow-up CT after RFA, we evaluated the size of enhancing index tumors and iodized oil retention, presence of abutting vessels, completeness of ablation of iodized oil retention, and the presence of ablative margins greater than 5 mm. Also, the time interval between transarterial chemoembolization and RFA was assessed. The cumulative local tumor progression rate was calculated using the Kaplan-Meier method, and the Cox proportional hazards model was adopted, to clarify the independent factors affecting local tumor progression. The technical success and technique effectiveness rate was 100% and 98.7%, respectively. Major complications were observed in 5.6%. The cumulative rates of local tumor progression at 1 and 2 years were 17.5% and 37.5%, respectively. In multivariate analyses, partial ablation of the targeted iodized oil retention was the sole independent predictor of a higher local tumor progression rate. CT-guided RFA of HCC around iodized oil retention was effective and safe. Local tumor progression can be minimized by complete ablation of not only index tumors, but targeted iodized oil deposits as well.

Low-Boom and Low-Drag Optimization of the Twin Engine Version of Silent Supersonic Business Jet

Science.gov (United States)

Sato, Koma; Kumano, Takayasu; Yonezawa, Masahito; Yamashita, Hiroshi; Jeong, Shinkyu; Obayashi, Shigeru

Multi-Objective Optimization has been applied to a design problem of the twin engine concept for Silent Supersonic Business Jet (SSBJ). This problem aims to find main wing, body, tail wing and engine nacelle configurations, which can minimize both sonic boom and drag in a supersonic cruising flight. The multi-objective genetic algorithm (MOGA) coupled with the Kriging model has been used to globally and effectively search for optimal design candidates in the multi-objective problem. The drag and the sonic boom have been evaluated by the computational fluid dynamics (CFD) simulation and the waveform parameter method. As a result, the present optimization has successfully obtained low-boom and low-drag design candidates, which are better than the baseline design by more than 40% regarding each performance. Moreover, the structure of design space has been visualized by the self-organizing map (SOM).

Study of a 30-M Boom For Solar Sail-Craft: Model Extendibility and Control Strategy

Science.gov (United States)

Keel, Leehyun

2005-01-01

Space travel propelled by solar sails is motivated by the fact that the momentum exchange that occurs when photons are reflected and/or absorbed by a large solar sail generates a small but constant acceleration. This acceleration can induce a constant thrust in very large sails that is sufficient to maintain a polar observing satellite in a constant position relative to the Sun or Earth. For long distance propulsion, square sails (with side length greater than 150 meters) can reach Jupiter in two years and Pluto in less than ten years. Converting such design concepts to real-world systems will require accurate analytical models and model parameters. This requires extensive structural dynamics tests. However, the low mass and high flexibility of large and light weight structures such as solar sails makes them unsuitable for ground testing. As a result, validating analytical models is an extremely difficult problem. On the other hand, a fundamental question can be asked. That is whether an analytical model that represents a small-scale version of a solar-sail boom can be extended to much larger versions of the same boom. To answer this question, we considered a long deployable boom that will be used to support the solar sails of the sail-craft. The length of fully deployed booms of the actual solar sail-craft will exceed 100 meters. However, the test-bed we used in our study is a 30 meter retractable boom at MSFC. We first develop analytical models based on Lagrange s equations and the standard Euler-Bernoulli beam. Then the response of the models will be compared with test data of the 30 meter boom at various deployed lengths. For this stage of study, our analysis was limited to experimental data obtained at 12ft and 18ft deployment lengths. The comparison results are positive but speculative. To observe properly validate the analytic model, experiments at longer deployment lengths, up to the full 30 meter, have been requested. We expect the study to answer the

Pembuatan Alur Pelayaran dalam Rencana Pelabuhan Marina Pantai Boom, Banyuwangi

Directory of Open Access Journals (Sweden)

Muhammad Didi Darmawan

2017-01-01

Full Text Available Pantai Boom merupakan pantai yang ada di Kabupaten Banyuwangi. Pantai ini terletak di Kelurahan Kampung Mandar, Kecamatan Banyuwangi, Banyuwangi, Jawa Timur. Pantai tersebut rencananya akan dibangun pelabuhan marina. Pelabuhan harus dilengkapi dengan beberapa fasilitas untuk mendukung rencana tersebut seperti salah satunya adalah alur pelayaran. Untuk membuat alur pelayaran diperlukan penelitian mengenai pasang surut, topografi dasar laut, serta jenis kapal yang melintas untuk memastikan kapal yang berlayar aman dari kemungkinan kecelakaan. Penelitian ini menggunakan data hasil pemeruman, data pasang surut yang diperoleh dari pengamatan langsung, serta berbagai jenis kapal yacht. Hasil dari penelitian ini didapatkan bahwa rencana dermaga sebaiknya dibangun 60 meter menjorok ke arah laut dengan panjang dermaga 25 meter. Dalam keadaan air rendah terendah (LLWL, ketiga jenis kapal yang ditentukan dapat merapat ke rencana Dermaga Pelabuhan Marina Pantai Boom, Banyuwangi. Daerah yang tidak bisa dilewati pada saat LLWL, pada saat MSL daerah tersebut sudah dapat dilewati oleh ketiga jenis kapal tersebut. Pada keadaan muka air tinggi tertinggi (HHWL, Kapal Yacht Class 8 dan 6 dapat melewati sebagian perairan sungai Pantai Boom.         Waktu yang tidak tepat untuk melakukan pelayaran pada saat LLWL dari alur pelayaran yang telah dibuat yaitu antara pukul 04:00 – 06:00 WIB pada saat bulan November 2015-Februari 2016 dan pukul 16:00-18:00 pada saat bulan Juni-Agustus 2016. Sedangkan Waktu yang tepat untuk melakukan pelayaran pada saat HHWL yaitu antara pukul 20:00–23:00 WIB pada saat bulan Desember 2015- Maret 2016 dan pukul 8:00-11:00 pada saat bulan Juni-September 2016.

Pre-electrocoalescer unit adapted to the extra-heavy oil characteristics

Energy Technology Data Exchange (ETDEWEB)

Noik, C.; Dalmazzone, C. [IFP, Rueil-Malmaison (France); Glenat, P. [Total, Paris (France)

2008-10-15

This paper described a dehydration process that can break water oil emulsions to mobilize extra heavy oils and bitumen extra heavy oils. The dehydration process is based on solvent mixture with additives injection. It involves large amount of additives, fairly high operating temperatures, solvent addition, and long retention time inside the vessels. The process could be improved by electrocoalescence, thereby reducing the amount of additive and reducing the retention times of vessels to reach oil export specifications. However, commercial electrocoalescence processes are not suitable for extra heavy oils because of the presence of polar heavy components limiting the electrocoalescence effect and therefore, limiting the efficiency of electrostatic coalescer. This paper presented a study whose objective was to determine the most efficient electrocoalescence parameters considering the characteristics of two types of heavy crude oils issued from cold and thermal productions. The paper presented experimental results for electrocoalescence additive selection and for the optimization of electrical parameters. The paper described the materials and methods, including fluids characterization; viscosity; differential scanning calorimetry; dispersion rig; electrical stability tester; and electrocoalescer rig. It was concluded that crude oils produced by thermal production schemes seemed more sensitive to the temperature effect than crudes produced by cold production. 10 refs., 3 tabs., 23 figs.

Current-driven plasmonic boom instability in three-dimensional gated periodic ballistic nanostructures

Science.gov (United States)

Aizin, G. R.; Mikalopas, J.; Shur, M.

2016-05-01

An alternative approach of using a distributed transmission line analogy for solving transport equations for ballistic nanostructures is applied for solving the three-dimensional problem of electron transport in gated ballistic nanostructures with periodically changing width. The structures with varying width allow for modulation of the electron drift velocity while keeping the plasma velocity constant. We predict that in such structures biased by a constant current, a periodic modulation of the electron drift velocity due to the varying width results in the instability of the plasma waves if the electron drift velocity to plasma wave velocity ratio changes from below to above unity. The physics of such instability is similar to that of the sonic boom, but, in the periodically modulated structures, this analog of the sonic boom is repeated many times leading to a larger increment of the instability. The constant plasma velocity in the sections of different width leads to resonant excitation of the unstable plasma modes with varying bias current. This effect (that we refer to as the superplasmonic boom condition) results in a strong enhancement of the instability. The predicted instability involves the oscillating dipole charge carried by the plasma waves. The plasmons can be efficiently coupled to the terahertz electromagnetic radiation due to the periodic geometry of the gated structure. Our estimates show that the analyzed instability should enable powerful tunable terahertz electronic sources.

[Migration and oil in Tabasco].

Science.gov (United States)

Lezama, J L

1987-01-01

"At the beginning of the seventies, important economic investments aimed at developing and commercializing the newly discovered oilwells were made in the state of Tabasco [Mexico]. As a result of this, the distribution and the social growth of the population in this state changed. This paper analyses the general characteristics of these changes, particularly those related to migration.... Generally speaking, the most important migratory movements which took place in this state during the oil boom were from one municipality to another and not from other states to Tabasco, as was thought at first.... This paper also describes the direction of the migratory flows and provides information about the sex of the migrants and about their insertion within the sphere of employment." (SUMMARY IN ENG) excerpt

The first boom: Industrious ancestors traced by trail-blazing impact assessment done for oil mega projects

Energy Technology Data Exchange (ETDEWEB)

Chandler, G.

2003-08-01

Impact studies done for the mammoth oil projects in the Alberta oil sand deposits have enabled archaeologists to intensively study the archaeological record of the Athabasca lowlands, that until about thirty years ago was an almost complete void. The first major discoveries were done in 1973: the Beaver River Quarry Site on the south bank of the Beaver River, found during an impact assessment study undertaken for Syncrude, yielded hundreds of thousands of artifacts, showing how sandstone was manufactured into tools and projectile points some 10,000 years ago. This discovery was followed by scores of new Historical Resources Impact Assessments (HRIAs) as part of the petroleum industry's expansion of oil sands country. These studies reveal that humans could have been living in the areas as far back as 10,000 years ago, as evidenced by a complex of ancient campsites and stone tool workshops discovered along the shore of the Athabasca River. Other sites and the archaeological significance of artifacts found near Nezu Lake, in the Cree Burn Lake area, and in the Fort Hills area north of Fort McKay are also described. The density of sites and artifacts from the oil sands leases suggest that the sites have been most intensely occupied during the period between 9,600 and 6,000 years ago.

The impact of cooking and delivery modes of thymol and carvacrol on retention and bioaccessibility in starchy foods.

Science.gov (United States)

Aravena, Gabriela; García, Olga; Muñoz, Ociel; Pérez-Correa, José R; Parada, Javier

2016-04-01

Oregano and thyme possess beneficial properties for human health, mainly attributable to monoterpenes such as thymol and carvacrol. The main objective of this research was to assess, on starchy food, the impact of cooking (boiling and baking) and delivery (ground leaves and essential oil) modes on retention and bioaccessibility of thymol and carvacrol. Retention was assessed after cooking, while bioaccessibility was estimated in cooked samples using an in vitro digestion model. Our results indicate that bioaccessibility was weakly dependent on cooking and delivery modes (27-33%). Boil cooking presented 20% more retention than baking for both compounds. When essential oil was added to the food matrix, thymol was retained almost 25% more when compared with ground leaves' addition. Conversely, carvacrol was retained 39% more when ground leaves were added. Copyright © 2015 Elsevier Ltd. All rights reserved.

Boom clay pore water, home of a diverse microbial community

International Nuclear Information System (INIS)

Wouters, Katinka; Moors, Hugo; Leys, Natalie

2012-01-01

Document available in extended abstract form only. Boom Clay pore water (BCPW) has been studied in the framework of geological disposal of nuclear waste for over two decades, thereby mainly addressing its geochemical properties. A reference composition for synthetic clay water has been derived earlier by modelling and spatial calibration efforts, mainly based on interstitial water sampled from different layers within the Boom clay. However, since microbial activity is found in a range of extreme circumstances, the possibility of microbes interacting with future radioactive waste in a host formation like Boom Clay, cannot be ignored. In this respect, BCPW was sampled from different Boom Clay layers using the Morpheus piezometer and subsequently analysed by a complementary set of microbiological and molecular techniques, in search for overall shared and abundant microorganisms. Similar to the previous characterization of the 'average' BCPW chemical composition, the primary aim of this microbiological study is to determine a representative BCPW microbial community which can be used in laboratory studies. Secondly, the in situ activity and the metabolic properties of members of this community were addressed, aiming to assess their survival and proliferation chances in repository conditions. In a first approach, total microbial DNA of the community was extracted from the BCPW samples. This molecular approach allows a broad insight in the total microbial ecology of the BCPW samples. By polymerase chain reaction (PCR) on the highly conserved 16S rRNA genes in this DNA pool and subsequent sequencing and bio-informatics analysis, operational taxonomic units (OTUs) could be assigned to the microbial community. The bacterial community was found to be quite diverse, with OTUs belonging to 8 different phyla (Proteobacteria, Actinobacteria, Firmicutes, Bacteroidetes, Chlorobi, Spirochetes, Chloroflexi and Deinococcus-Thermus). These results provide an overall view of the

Boom clay pore water, home of a diverse microbial community

Energy Technology Data Exchange (ETDEWEB)

Wouters, Katinka; Moors, Hugo; Leys, Natalie [SCK.CEN, Environment, Health and Safety Institute, B-2400 Mol (Belgium)

2012-10-15

Document available in extended abstract form only. Boom Clay pore water (BCPW) has been studied in the framework of geological disposal of nuclear waste for over two decades, thereby mainly addressing its geochemical properties. A reference composition for synthetic clay water has been derived earlier by modelling and spatial calibration efforts, mainly based on interstitial water sampled from different layers within the Boom clay. However, since microbial activity is found in a range of extreme circumstances, the possibility of microbes interacting with future radioactive waste in a host formation like Boom Clay, cannot be ignored. In this respect, BCPW was sampled from different Boom Clay layers using the Morpheus piezometer and subsequently analysed by a complementary set of microbiological and molecular techniques, in search for overall shared and abundant microorganisms. Similar to the previous characterization of the 'average' BCPW chemical composition, the primary aim of this microbiological study is to determine a representative BCPW microbial community which can be used in laboratory studies. Secondly, the in situ activity and the metabolic properties of members of this community were addressed, aiming to assess their survival and proliferation chances in repository conditions. In a first approach, total microbial DNA of the community was extracted from the BCPW samples. This molecular approach allows a broad insight in the total microbial ecology of the BCPW samples. By polymerase chain reaction (PCR) on the highly conserved 16S rRNA genes in this DNA pool and subsequent sequencing and bio-informatics analysis, operational taxonomic units (OTUs) could be assigned to the microbial community. The bacterial community was found to be quite diverse, with OTUs belonging to 8 different phyla (Proteobacteria, Actinobacteria, Firmicutes, Bacteroidetes, Chlorobi, Spirochetes, Chloroflexi and Deinococcus-Thermus). These results provide an overall view of the

Simulation and controller design for an agricultural sprayer boom leveling system

KAUST Repository

Sun, Jian; Miao, Yubin

2011-01-01

According to the agricultural precision requirements, the distance from sprayer nozzles to the corps should be kept between 50 cm to 70 cm. The sprayer boom also needs to be kept parallel to the field during the operation process. Thus we can

Mobility of the dissolved organic matter through intact boom clay cores

International Nuclear Information System (INIS)

Put, M.J.; Dierckx, A.; Aertsens, M.; Canniere, P. de

1998-01-01

Performance assessment studies are expected to predict the enhancement of the migration of trivalent lanthanides and actinides due to their complexation with organic matter, which play a role as a transport agent [1]. Therefore, the mobility of the dissolved organic matter in the interstitial boom clay water is studied. For the first time, the mobile fraction present in the clay water is concentrated and labelled with a radioisotope to study the mobility of the organic matter in clay and the interaction of the mobile with the non-mobile. The isotopes tested as label are 125 I and 14 C. The 125 I label proved to be unstable and hence discarded. The labelled organic matter is then diluted for migration experiments on boom clay cores under anaerobic conditions. The influence of the molecular size on its mobility is studied by the separation of the labelled organic matter in different size fractions. (orig.)

Prime Borrowers and Financial Innovation in the Housing Boom and Bust

DEFF Research Database (Denmark)

Bäckman, Claes; Lutz, Chandler

for better consumption smoothing, even absent any shift in credit supply. In support of the model, we find that the introduction of interest-only mortgages was followed by a large increase in the number of buyers, even as credit quality remained constant. On the aggregate level the results indicate...... that interest-only mortgages amplified the boom-bust pattern in housing: house prices increased an additional 35 percent during the boom due to IO loans, and subsequently reverse during the bust. These effects, which cannot be explained by changes in lending standards or shifts in credit supply, are magnified...... in local housing markets with higher ex-ante house price expectations. Together, the findings document the consequences of introducing IO loans on the micro- and macro level, and illustrates how new mortgage products can have large impacts even in the absence of a shift in credit supply...

Changing Fortunes: How China’s Boom Caused the Financial Crisis

NARCIS (Netherlands)

H. Mees (Heleen)

2012-01-01

textabstractThis dissertation includes five academic papers that – one way or the other – all relate to China. The first paper delivers proof for the central thesis of this thesis, which is that China’s boom caused the 2008 financial crisis and ensuing recession. As much as I hoped from the outset

Dietary structured lipids for post-weaning piglets: fat digestibility, nitrogen retention and fatty acid profiles of tissues

DEFF Research Database (Denmark)

Straarup, Ellen Marie; Danielsen, V.; Høy, Carl-Erik

2006-01-01

In four groups of post-weaning piglets the effects of triacylglycerol structure and fatty acid profiles of four dietary fats on apparent faecal nutrient digestibility, nitrogen retention and fatty acid profiles of platelet and erythrocyte membranes, liver, adipose tissue and skeletal muscle were...... examined. Dietary fats included as 10% (w/w) of the diets were two structured fats of rapeseed oil interesterified with tridecanoin (R1) or coconut oil (R2), respectively, one mixture of rapeseed oil and coconut oil (R3) and rapeseed oil as control (R4). Faeces and urine from piglets weaned at 28 days...

Financial services in England in the late XVII century and first equity market boom (1691–1693

Directory of Open Access Journals (Sweden)

S.Z. Moshenskyi

2016-09-01

Full Text Available The article shows the formation of the British financial services industry in the 1690's and the reasons of the first joint-stock companies’ boom of 1691–1693's. The author describes the course of events of this boom, and data on the volume of transactions in shares. The reasons of the joint-stock boom end are associated with very low capitalization of most of the new companies. The consequence of rapid economic growth in England in the late XVII century was the appearance and rapid development of financial services. Financial intermediaries appeared first and their services, in particular the services of insurance companies, were in demand. The rapid increase in the number of insurance companies has become prerequisite for becoming financial capitalism that led to the emergence of other intermediaries which provided financial services. Among them there were the so-called "notaries" that offered a full range of services related to land transactions and "bankers, jewelers," that woke the first private bankers. Thus, in the early 1690's London had a favorable environment for the rapid growth of the financial market, which was the main precondition for expanding market shares and led to the joint-stock boom.

Developments in modelling of thermohydro-geomechanical behaviour of Boom clay and clay-based buffer materials (volume 2)

International Nuclear Information System (INIS)

Baldi, G.; Hueckel, T.; Peano, A.; Pellegrini, R.

1991-01-01

This study is composed of two parts: The first part (Volume 1) lays the foundations of a comprehensive theoretical treatment of the interaction between water and soil skeleton during thermal dilatation. The second part (volume 2) is devoted to the development and the application of advance constitutive modelling of mechanical behaviour of clays taking into account the extensive tests of Boom clay reported in the first volume. The development concentrated on the improvement of prediction of the volumetric response of clay skeleton: (a) improving the dilatancy prediction at low to high overconsolidation ratios (Section 2). An elasto-plastic constitutive model has been developed to account for this effect (Section 3.2.); (b) modelling of swelling effects (Section 2.5). A preliminary interpretative model for swelling prediction has been developed (Section 2.5). The application part consisted in interpreting the experimental results obtained for Boom clay to calibrate a set of constants (Section 3) for performing numerical analyses (Section 4) for the thermomechanical model already calibrated for Boom clay (Appendix). Interpretation of the tests required an assessment of influence of the strong anisotropy effects revealed by Boom clay on the basis of an interpretative model characterized by a kinematic hardening plasticity and coupled elasticity (section 3)

Modelling the impact of oil prices on Vietnam's stock prices

Energy Technology Data Exchange (ETDEWEB)

Narayan, Paresh Kumar [School of Accounting, Economics and Finance, Deakin University, Victoria 3125 (Australia); Narayan, Seema [School of Economics, Finance and Marketing, Royal Melbourne Institute of Technology University, Melbourne (Australia)

2010-01-15

The goal of this paper is to model the impact of oil prices on Vietnam's stock prices. We use daily data for the period 2000-2008 and include the nominal exchange rate as an additional determinant of stock prices. We find that stock prices, oil prices and nominal exchange rates are cointegrated, and oil prices have a positive and statistically significant impact on stock prices. This result is inconsistent with theoretical expectations. The growth of the Vietnamese stock market was accompanied by rising oil prices. However, the boom of the stock market was marked by increasing foreign portfolio investment inflows which are estimated to have doubled from US$0.9 billion in 2005 to US$1.9 billion in 2006. There was also a change in preferences from holding foreign currencies and domestic bank deposits to stocks local market participants, and there was a rise in leveraged investment in stock as well as investments on behalf of relatives living abroad. It seems that the impact of these internal and domestic factors were more dominant than the oil price rise on the Vietnamese stock market. (author)

China's optimal stockpiling policies in the context of new oil price trend

International Nuclear Information System (INIS)

Xie, Nan; Yan, Zhijun; Zhou, Yi; Huang, Wenjun

2017-01-01

Optimizing the size of oil stockpiling plays a fundamental role in the process of making national strategic petroleum reserve (SPR) policies. There have been extensive studies on the operating strategies of SPR. However, previous literatures have paid more attention to a booming or stable international oil market, while few studies analyzed the impact of a long-term low oil price on SPR policy. As a supplement, this paper extends a static model to study China's optimal stockpiling policy under different oil price trends, and in response to different current oil prices. A new variable “FC”, which demonstrates the appreciation and depreciation of the reserved oil economic value, has been taken into account to assess the optimal size of SPR. In this paper, a more multi-perspective of view is provided to consider the policies of China's SPR, especially under the different trend of international oil price fluctuations. - Highlights: • We extended a static model to study optimal stockpiling size of China's SPR. • A new variable “FC” was applied to illustrate the shifting financial value of SPR. • We analyzed how current oil price and varied prediction influence optimal size. • Operational measures could be adjusted at the end of each decision-making period. • A more multifaceted of view might be provided for China's SPR policy-making.

Tracer monitoring of enhanced oil recovery projects

Directory of Open Access Journals (Sweden)

Kleven R.

2013-05-01

Full Text Available In enhanced oil recovery (EOR, chemicals are injected into the oil reservoir, either to increase macroscopic sweep efficiency, or to reduce remaining oil saturation in swept zones. Tracers can be used to identify reservoirs that are specifically suited for EOR operations. Injection of a selection of partitioning tracers, combined with frequent sample analysis of produced fluids, provides information suited for estimation of residual oil saturation. Tracers can also be used to evaluate and optimize the application of EOR chemicals in the reservoir. Suitable tracers will follow the EOR chemicals and assist in evaluation of retention, degradation or trapping. In addition to field applications, tracers also have a large potential as a tool to perform mechanistic studies of EOR chemicals in laboratory experiments. By labelling EOR chemicals with radioactive isotopes of elements such as H, C and S, detailed studies of transport mechanisms can be carried out. Co-injection of labelled compounds in dynamic flooding experiments in porous media will give information about retention or separation of the unique compounds constituting the chemical formulation. Separation of such compounds may be detrimental to obtaining the EOR effect expected. The paper gives new information of specific methods, and discusses current status for use of tracers in EOR operations.

Carotenoids concentration of Gac (Momordica cochinchinensis Spreng.) fruit oil using cross-flow filtration technology.

Science.gov (United States)

Mai, Huỳnh Cang; Truong, Vinh; Debaste, Frédéric

2014-11-01

Gac (Momordica cochinchinensis Spreng.) fruit, a traditional fruit in Vietnam and other countries of eastern Asia, contains an oil rich in carotenoids, especially lycopene and β-carotene. Carotenoids in gac fruit oil were concentrated using cross-flow filtration. In total recycle mode, effect of membrane pore size, temperature, and transmembrane pressure (TMP) on permeate flux and on retention coefficients has been exploited. Resistance of membrane, polarization concentration, and fouling were also analyzed. Optimum conditions for a high permeate flux and a good carotenoids retention are 5 nm, 2 bars, and 40 °C of membrane pore size, TMP, and temperature, respectively. In batch mode, retentate was analyzed through index of acid, phospholipids, total carotenoids content (TCC), total antioxidant activity, total soluble solids, total solid content, color measurement, and viscosity. TCC in retentate is higher 8.6 times than that in feeding oil. Lipophilic antioxidant activities increase 6.8 times, while hydrophilic antioxidant activities reduce 40%. The major part of total resistance is due to polarization (55%) while fouling and intrinsic membrane contribute about 30% and 24%, respectively. © 2014 Institute of Food Technologists®

Being young in a boom town

Energy Technology Data Exchange (ETDEWEB)

O' Connor, Christopher

2011-08-15

Fort McMurray is a booming town, having grown from small town to big city in a short time. A study was conducted to determine how this change affected young people. Results show they felt the changing environment required them to adapt all the time, which was a challenge but also a source of opportunities. Fort McMurray, with a labour shortage, afforded young people a lot of well-paid, flexible part time jobs during high school. These jobs were important to fund their post-secondary education. Although most of the young people saw themselves living elsewhere in 10 years, they could possibly stay if local challenges in the city were addressed.

U.S. E and P surge hinges on technology, not oil price

International Nuclear Information System (INIS)

Anon.

1997-01-01

Technology, not oil and gas prices, have fueled the recent surge in US activity, leading to greater sustainability, according to Clarance P. Cazalot Jr., vice-president of Texaco Inc. and president of Texaco Exploration and Production Inc. Cazalot expects gas and oil prices to decrease slightly to within the historical range of $18--21/bbl for oil and $1.50--2.00/Mcf for gas for the next few years. Cazalot said the most critical factors affecting the future of US exploration and production activities are technology and personnel. Technology is driving the current industry boom in the Us and is the basis for Texaco's projected US production growth. Perhaps industry's greatest challenge is attracting, developing, and retaining skilled people at all levels, said Cazalot. People shortages result in increased competition for personnel with critical skills, high employee turnover rates, and increased costs associated with attracting and retaining technical talent. A table gives data on costs of well drilling

In situ bioremediation strategies for oiled shoreline environments

International Nuclear Information System (INIS)

Lee, K.; Mora, S. de

1999-01-01

Despite advances in preventative measures, recent events have demonstrated that accidental oil spills at sea will still occur. While physical (e.g. booms and skimmers) and chemical (e.g. chemical dispersants) methods have been developed to recover and/or disperse oil spilled at sea, they are not 100% effective and are frequently limited by operational constraints attributed to sea state and/or nature of the contamination. As a result, oil spills frequently impact shoreline environments. In situ bioremediation, the addition of substances or modification of habitat at contaminated sites to accelerate natural biodegradation processes, is now recognised as an alternative spill response technology of the remediation of these sites. Recommended for use following the physical removal of bulk oil, this treatment strategy has an operational advantage in that it breaks down and/or removes the residual contamination in place. Laboratory experiments and field trials have demonstrated the feasibility and success of bioremediation strategies such as nutrient enrichment to enhance bacterial degradation of oil on cobble, sand beach and salt marsh environments. With improved knowledge of the factors that limit natural oil degradation rates, the feasibility of other strategies such as phytoremediation, enhanced oil-mineral fines interaction and the addition of oxygen or alternative electron acceptors are now being evaluated. Laboratory and field test protocols are being refined for the selection of effective bioremediation agents and methods of application. It is recommended that future operational guidelines include real time product efficacy test and environmental effects monitoring programs. Termination of treatment should be implemented when: 1) it is no longer effective; 2) the oil has degraded to acceptable biologically benign concentrations; or 3) toxicity due to the treatment is increasing. (Author)

Baby boom generation at the retirement onset

Directory of Open Access Journals (Sweden)

Stojilković Jelena

2010-01-01

Full Text Available Sudden increase in the number of live births after the Second World War due to an increase in fertility rates has led to the formation of cohorts with specific characteristics or baby boom generation. This generation is unique in the history of the demographic phenomenon that has affected and affects the functioning of many segments of society. The aim of this paper is to assess structure of baby boomers who are few years away from retirement, using demographic data. Impact of baby boomer age structure of current and future retirees is described with a graphical display of current and projected age pyramid of baby boomers. Demographic pattern that women live longer than men is evident in the projected pyramid. In addition, the number of baby boomers will lead to a "younger" old population. The imbalance in the number of men and women pensioners, as well as older cohorts of women and female baby boomers was analyzed. As a result, an increasing trend of women's age pensioners who are members of the baby boom generation was clearly observed, which is opposite to the older cohort of women who often were family pensioners. Different circumstances and conditions in which female boomers lived and worked will form a new "pension model" because they will gain their benefits as well as men, for the first time in significant number, unlike their mothers, which gained the right to retire after they become widows. Number of women age pensioners is getting greater comparing to men, as the result of changes in the economic activities of women in the last half of the 20th century. When baby boomers retire and exit the working population, this will create a vacuum, because the numerically smaller generations will enter working population, while the sudden and very shortly, the number of population older than 60 or 65 will increase, most of them will likely to acquire the right to a pension. It is undeniable that baby boomers had impact on demographic structure

In situ and laboratory migration experiments through boom clay at Mol

International Nuclear Information System (INIS)

Preter, P. de; Put, M.; Canniere, P. de

1993-01-01

Physico-chemical characterization and migration studies in the Boom clay, envisaged as a potential host sediment for high level waste disposal in Belgium, were started some 15 years ago. A synthesis study of this experimental work has recently been conducted to compile all available data. From a comparison of the available migration data and the data requirements as derived from the performance assessment studies PAGIS (1988) and PACOMA (1991) the new migration programme (1991-1995) was defined. The critical radionuclides, both with relation to dose rates to man and to missing or unreliable migration data, turned out to be 14 C, 99 Tc. 135 Cs and 237 Np. A second group of radionuclides was found to be possibly critical: 79 Se, 93 Zr, 107 Pd, U - , Am - , Cm - , and Pu-isotopes. This report concentrates on the experimental results as obtained from the migration experiments started in the previous migration programme. Some of the reported radionuclides e.g. 90 Sr) have lost their critical character and will not be further studied within the new programme. New experimental data from laboratory tests have become available for Np, Cs, Sr and C (as HC0 3 - ) and the first results on the migration of organic molecules dissolved in the interstitial Boom clay water are reported. The hydraulic parameters (the hydraulic conductivity K and the storage coefficient S o ) were calculated from both laboratory percolation experiments and in situ piezometric measurements. Conclusions concerning Boom clay anisotropy are drawn. Finally, a short description of the ongoing in situ HTO injection experiment is given and the experimental data are analyzed and discussed. 10 refs., 4 figs., 1 tab

Oil Price Volatility and Economic Growth in Nigeria: a Vector Auto-Regression (VAR Approach

Directory of Open Access Journals (Sweden)

Edesiri Godsday Okoro

2014-02-01

Full Text Available The study examined oil price volatility and economic growth in Nigeria linking oil price volatility, crude oil prices, oil revenue and Gross Domestic Product. Using quarterly data sourced from the Central Bank of Nigeria (CBN Statistical Bulletin and World Bank Indicators (various issues spanning 1980-2010, a non‐linear model of oil price volatility and economic growth was estimated using the VAR technique. The study revealed that oil price volatility has significantly influenced the level of economic growth in Nigeria although; the result additionally indicated a negative relationship between the oil price volatility and the level of economic growth. Furthermore, the result also showed that the Nigerian economy survived on crude oil, to such extent that the country‘s budget is tied to particular price of crude oil. This is not a good sign for a developing economy, more so that the country relies almost entirely on revenue of the oil sector as a source of foreign exchange earnings. This therefore portends some dangers for the economic survival of Nigeria. It was recommended amongst others that there should be a strong need for policy makers to focus on policy that will strengthen/stabilize the economy with specific focus on alternative sources of government revenue. Finally, there should be reduction in monetization of crude oil receipts (fiscal discipline, aggressive saving of proceeds from oil booms in future in order to withstand vicissitudes of oil price volatility in future.

Pyrolysis of de-oiled seed cake of Jatropha Curcas and catalytic steam reforming of pyrolytic bio-oil to hydrogen.

Science.gov (United States)

Renny, Andrew; Santhosh, Viswanathan; Somkuwar, Nitin; Gokak, D T; Sharma, Pankaj; Bhargava, Sanjay

2016-11-01

The aim of this work was to study the pyrolysis of de-oiled seed cake of Jatropha Curcas and catalytic steam reforming of pyrolytic bio-oil to hydrogen. As per literature, presence of heavy nitrogenous and oxygenated compounds leads to catalyst deactivation. Here, an attempt has been made to tune pyrolytic reactions to optimize the N and O content of the pyrolytic bio-oil. Bio-oil conversion and hydrogen yield decreased as reaction progressed, which attributes to temporary loss of catalytic activity by blockage of catalyst pores by carbon deposition. Further, retention of steam reforming activity after repetitive steam activation suggests long-term catalyst usage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Did the Aid Boom Pacify Sub-Saharan Africa?

OpenAIRE

Azam, Jean-Paul; Thelen, Véronique

2017-01-01

The incidence of civil war in Sub-Saharan Africa since the turn of the century is less than half of what it was on average in the last quarter of the 20th century. This paper shows that the aid boom triggered by 9/11 played a key role in achieving purposefully this result using panel data for 46 African countries over four decades. It applies a nearidentification approach to test the aid-conflict tradeoff, taking due account of asymmetric information between the donors and the econometrician....

NASA's Advanced Solar Sail Propulsion System for Low-Cost Deep Space Exploration and Science Missions that Use High Performance Rollable Composite Booms

Science.gov (United States)

Fernandez, Juan M.; Rose, Geoffrey K.; Younger, Casey J.; Dean, Gregory D.; Warren, Jerry E.; Stohlman, Olive R.; Wilkie, W. Keats

2017-01-01

Several low-cost solar sail technology demonstrator missions are under development in the United States. However, the mass saving derived benefits that composites can offer to such a mass critical spacecraft architecture have not been realized yet. This is due to the lack of suitable composite booms that can fit inside CubeSat platforms and ultimately be readily scalable to much larger sizes, where they can fully optimize their use. With this aim, a new effort focused at developing scalable rollable composite booms for solar sails and other deployable structures has begun. Seven meter booms used to deploy a 90 m2 class solar sail that can fit inside a 6U CubeSat have already been developed. The NASA road map to low-cost solar sail capability demonstration envisioned, consists of increasing the size of these composite booms to enable sailcrafts with a reflective area of up to 2000 m2 housed aboard small satellite platforms. This paper presents a solar sail system initially conceived to serve as a risk reduction alternative to Near Earth Asteroid (NEA) Scout's baseline design but that has recently been slightly redesigned and proposed for follow-on missions. The features of the booms and various deployment mechanisms for the booms and sail, as well as ground support equipment used during testing, are introduced. The results of structural analyses predict the performance of the system under microgravity conditions. Finally, the results of the functional and environmental testing campaign carried out are shown.

Background Pressure Profiles for Sonic Boom Vehicle Testing in the NASA Glenn 8- by 6-Foot Supersonic Wind Tunnel

Science.gov (United States)

Castner, Raymond; Shaw, Stephen; Adamson, Eric; Simerly, Stephanie

2013-01-01

In an effort to identify test facilities that offer sonic boom measurement capabilities, an exploratory test program was initiated using wind tunnels at NASA research centers. The subject of this report is the sonic boom pressure rail data collected in the Glenn Research Center 8- by 6-Foot Supersonic Wind Tunnel. The purpose is to summarize the lessons learned based on the test activity, specifically relating to collecting sonic boom data which has a large amount of spatial pressure variation. The wind tunnel background pressure profiles are presented as well as data which demonstrated how both wind tunnel Mach number and model support-strut position affected the wind tunnel background pressure profile. Techniques were developed to mitigate these effects and are presented.

Nondestructive Online Detection of Welding Defects in Track Crane Boom Using Acoustic Emission Technique

Directory of Open Access Journals (Sweden)

Yong Tao

2014-04-01

Full Text Available Nondestructive detection of structural component of track crane is a difficult and costly problem. In the present study, acoustic emission (AE was used to detect two kinds of typical welding defects, that is, welding porosity and incomplete penetration, in the truck crane boom. Firstly, a subsidiary test specimen with special preset welding defect was designed and added on the boom surface with the aid of steel plates to get the synchronous deformation of the main boom. Then, the AE feature information of the welding defect could be got without influencing normal operation of equipment. As a result, the rudimentary location analysis can be attained using the linear location method and the two kinds of welding defects can be distinguished clearly using AE characteristic parameters such as amplitude and centroid frequency. Also, through the comparison of two loading processes, we concluded that the signal produced during the first loading process was mainly caused by plastic deformation damage and during the second loading process the stress release and structure friction between sections in welding area are the main acoustic emission sources. Thus, the AE is an available tool for nondestructive online detection of latent welding defects of structural component of track crane.

The Use of Structural-Acoustic Techniques to Assess Potential Structural Damage From Sonic Booms

Science.gov (United States)

Garrelick, Joel; Martini, Kyle

1996-01-01

The potential impact of supersonic operations includes structural damage from the sonic boom overpressure. This paper describes a study of how structural-acoustic modeling and testing techniques may be used to assess the potential for such damage in the absence of actual flyovers. Procedures are described whereby transfer functions relating structural response to sonic boom signature may be obtained with a stationary acoustic source and appropriate data processing. Further, by invoking structural-acoustic reciprocity, these transfer functions may also be acquired by measuring the radiated sound from the structure under a mechanical drive. The approach is based on the fundamental assumption of linearity, both with regard to the (acoustic) propagation of the boom in the vicinity of the structure and to the structure's response. Practical issues revolve around acoustic far field and source directivity requirements. The technique was implemented on a specially fabricated test structure at Edwards AFB, CA with the support of Wyle Laboratories, Inc. Blank shots from a cannon served as our acoustic source and taps from an instrumented hammer generated the mechanical drive. Simulated response functions were constructed. Results of comparisons with corresponding measurements recorded during dedicated supersonic flyovers with F-15 aircraft are presented for a number of sensor placements.

Radionuclide transport in the Neogene aquifer system located in the environment of the Boom clay

International Nuclear Information System (INIS)

Gedeon, M.; Marivoet, J.; Vandersteen, K.

2012-01-01

Document available in extended abstract form only. In the framework the Belgian research program on the long term management of high-level and/or long-lived radioactive waste coordinated by ONDRAF/NIRAS, the Boom Clay is considered as a reference host rock for the geological disposal of high-level radioactive waste in NE-Belgium (Campine area). In the frame of the performance assessments of a disposal system located in the Boom Clay Formation, the transport of radionuclides diffusing through the clay barrier into the aquifers located above is modelled. The transport model for the Neogene aquifer is based on a series of groundwater flow models simulating the aquifer systems in the surroundings of the Boom Clay. This series of groundwater models include the regional north-eastern Belgium model simulating flow both above and below the Boom Clay, the recently updated deep-aquifer pumping model, simulating transient flow in the over-exploited aquifers below the Boom Clay and finally the catchment-scale Neogene aquifer model, simulating flow in the aquifer system above the Boom Clay. The Neogene aquifer system consists of two main aquifers. The Pliocene aquifer is located at the top, separated from the underlying Miocene aquifer by the Kasterlee Clay aquitard. The Miocene aquifer consists of three hydrostratigraphic units: the Diest, Berchem and Voort Formations; with the last two having a lower hydraulic conductivity than the Diest unit. The transport model for the Neogene aquifer represents a fraction of the catchment-scale Neogene aquifer model. It stretches from the local divide between the Grote and Kleine Nete Rivers up to the Kleine Nete River, representing the main model sink. The boundary conditions and the sources/sinks in the Pliocene aquifer are defined mostly by the surface water features, such as the rivers, brooks, lakes and canals. In the partially confined Miocene aquifer, the effect of the surface water features is dampened and the heads at the model

Comparison of Separation of Seed Oil Triglycerides Containing Isomeric Conjugated Octadecatrienoic Acid Moieties by Reversed-Phase HPLC

OpenAIRE

Anh Van Nguyen; Victor Deineka; Lumila Deineka; Anh Vu Thi Ngoc

2017-01-01

Relative retention analysis and increment approach were applied for the comparison of triglycerides (TGs) retention of a broad set of plant seed oils with isomeric conjugated octadecatrienoic acids (CLnA) by reversed-phase HPLC for “propanol-2-acetonitrile” mobile phases and Kromasil 100-5C18 stationary phase with diode array detection (DAD) and mass spectrometric (MS) detection. The subjects of investigation were TGs of seed oils: Calendula officinalis, Catalpa ovata, Jacaranda mimosifolia, ...

Accelerator boom hones China's engineering expertise

Science.gov (United States)

Normile, Dennis

2018-02-01

In raising the curtain on the China Spallation Neutron Source, China has joined just four other nations in having mastered the technology of accelerating and controlling beams of protons. The $277 million facility, set to open to users this spring in Dongguan, is expected to yield big dividends in materials science, chemistry, and biology. More world class machines are on the way, as China this year starts construction on four other major accelerator facilities. The building boom is prompting a scramble to find enough engineers and technicians to finish the projects. But if they all come off as planned, the facilities would position China to tackle the next global megaproject: a giant accelerator that would pick up where Europe's Large Hadron Collider leaves off.

Higher Education and the Minerals Boom: A View from the Regions

Science.gov (United States)

Bell, Philip

2014-01-01

This paper examines the impact of the minerals boom to date on the demand for higher education in Central Queensland, and the sustainability of higher education providers in high economic growth environments. Several datasets were used to examine changes in the demand for higher education among specific student groups within the region, the…

The secret of neuroscience boom: Are there secret human experiments in Latin América?

Directory of Open Access Journals (Sweden)

David Salinas Flores

2016-01-01

Full Text Available About 6 years ago there sparked a phenomenon in science called the neuroscientific boom. Neurologists underpin this phenomenon to cost reduction techniques such as electroencephalograms and to improved noninvasive technology such as functional MRI. But the human brain, the most complex organ in the universe, has not yet been fully investigated with the existing noninvasive technologies. Thus, there is a suspicion that the real reason for this boom is a secret, forced, and illicit human experimentation in Latin America. Physicians should investigate, be alert, and report these potential unethical human experiments to prevent any further damage to the public health of the citizens of Latin societies.

Eagle Ford Shale BTEX and NOx concentrations are dominated by oil and gas industry emissions

Science.gov (United States)

Schade, G. W.; Roest, G. S.

2017-12-01

US shale oil and gas exploration has been identified as a major source of greenhouse gases and non-methane hydrocarbon (NMHC) emissions to the atmosphere. Here, we present a detailed analysis of 2015 air quality data acquired by the Texas Commission on Environmental Quality (TCEQ) at an air quality monitoring station in Karnes County, TX, central to Texas' Eagle Ford shale area. Data include time series of hourly measured NMHCs, nitrogen oxides (NOx), and hydrogen sulfide (H2S) alongside meteorological measurements. The monitor was located in Karnes City, and thus affected by various anthropogenic emissions, including traffic and oil and gas exploration sources. Highest mixing ratios measured in 2015 included nearly 1 ppm ethane, 0.8 ppm propane, alongside 4 ppb benzene. A least-squares minimization non-negative matrix factorization (NMF) analysis, tested with prior data analyzed using standard PMF-2 software, showed six major emission sources: an evaporative and fugitive source, a flaring source, a traffic source, an oil field source, a diesel source, and an industrial manufacturing source, together accounting for more than 95% of data set variability, and interpreted using NMHC composition and meteorological data. Factor scores strongly suggest that NOx emissions are dominated by flaring and associated sources, such as diesel compressor engines, likely at midstream facilities, while traffic in this rural area is a minor NOx source. The results support, but exceed existing 2012 emission inventories estimating that local traffic emitted seven times fewer NOx than oil and gas exploration sources in the county. Sources of air toxics such as the BTEX compounds are also dominated by oil and gas exploration sources, but are more equally distributed between the associated factors. Benzene abundance is only 20-40% associated with traffic sources, and may thus be 2.5-5 times higher now than prior to the shale boom in this area. Although the monitor was located relatively

China's new oil import status underpins world's most dynamic petroleum scene

International Nuclear Information System (INIS)

Anon.

1994-01-01

China is poised to become a net importer of oil in 1994--95. That sets the stage for China importing more than 1 million b/d of crude oil and refined products on a net basis by the turn of the century. That development underpins a bigger story -- arguably the biggest story on the petroleum scene today. The turnabout that is seeing the world's fifth biggest oil producer go from significant oil exporter in recent years to major oil importer by the turn of the century points to several other truisms in the petroleum industry: That an oil demand surge in the Asia-Pacific region led by China will fuel overall world oil demand growth for years to come; that a refining and petrochemical boom in a country that accounts for about one fifth of the world's population has dramatic implications for those two industries; that privatization has gathered so much momentum in the global petroleum industry that even Communist China has embraced some form of it; that China's domestic crude supply shortfall is creating unprecedented opportunities for foreign upstream investors in one of the world's most prospective yet underexplored and underexploited regions; and that the same new openness that is distinguishing China's petroleum industry today is turning some of its state owned companies into major competitors to be reckoned with on the international scene, upstream and downstream. The paper discusses China's oil export/import balance, supply/demand outlook, policy changes, and new regulations governing export of crude oil and products

Technology for the oil spills clean-up which provides preliminary accumulation of sorbents into the area of emergence and localization oil spills

Directory of Open Access Journals (Sweden)

M.L.Soroka

2012-12-01

Full Text Available Introduction: The implementation of measures for the prevention and spill of dangerous goods is an important aspect of sustainable development of railway transport. oil spills accident are the most dangerous. They are accompanied by significant pollution of all environmental objects. Studying and development of oil localization and clean-up technologies of such accidents is an important problem of environmental protection to modern conditions of railway transport development. The purpose: to improve the effectiveness of traditional methods of oil spill elimination and the development of new clean-up technologies adapted to the real conditions of the railway transport of Ukraine. Methods: To achieve the research purposes was used analysis of material flows, typical for places emergence and localization of the oil spill on the railways. Results: Analysis of standard technological scheme for the oil spills eliminations has shown that the most difficult task of effective clean-up surfaces is the timely delivery of oil sorbents and special equipment to the area spill containment. The general effectiveness of the elimination activities specifies the time from the beginning contact of dangerous goods with environmental objects to the absorption it into the structure of sorbent . Us was developed the technological scheme of oil spill elimination. This scheme provide a permanent and fast access to the sorbents into the oil spill localization area. It was proposed to device that allows you to transport the sorbent into sorption booms directly on the tank for transportation of petroleum products. Conclusions: Preventative accumulation of sorbents to the oil spill elimination into the localization area provides the organizational and operational simplicity of all stages of clean-up technology. Technical and economic assessment shows that the proposed technology is effective, technologically feasible and economically competitive.

Thermal Cracking of Jatropha Oil with Hydrogen to Produce Bio-Fuel Oil

Directory of Open Access Journals (Sweden)

Yi-Yu Wang

2016-11-01

Full Text Available This study used thermal cracking with hydrogen (HTC to produce bio-fuel oil (BFO from jatropha oil (JO and to improve its quality. We conducted HTC with different hydrogen pressures (PH2; 0–2.07 MPa or 0–300 psig, retention times (tr; 40–780 min, and set temperatures (TC; 623–683 K. By applying HTC, the oil molecules can be hydrogenated and broken down into smaller molecules. The acid value (AV, iodine value, kinematic viscosity (KV, density, and heating value (HV of the BFO produced were measured and compared with the prevailing standards for oil to assess its suitability as a substitute for fossil fuels or biofuels. The results indicate that an increase in PH2 tends to increase the AV and KV while decreasing the HV of the BFO. The BFO yield (YBFO increases with PH2 and tr. The above properties decrease with increasing TC. Upon HTC at 0.69 MPa (100 psig H2 pressure, 60 min time, and 683 K temperature, the YBFO was found to be 86 wt%. The resulting BFO possesses simulated distillation characteristics superior to those of boat oil and heavy oil while being similar to those of diesel oil. The BFO contains 15.48% light naphtha, 35.73% heavy naphtha, 21.79% light gas oil, and 27% heavy gas oil and vacuum residue. These constituents can be further refined to produce gasoline, diesel, lubricants, and other fuel products.

China’s Internet Finance Boom and Tyrannies of Inclusion

OpenAIRE

Loubere, Nicholas

2018-01-01

One of the main drivers of China’s e-commerce boom is the dramatic expansion of the country’s Internet finance industry, which has grown and diversified at a staggering rate over the past decade. The emergence of Chinese Internet finance has been discussed in largely positive terms as facilitating commercial activity. It has also been linked to the wider developmental goal of promoting financial inclusion through the provision of financial services to previously excluded populations. Emerging...

The baby boom, the baby bust, and the housing market.

Science.gov (United States)

Mankiw, N G; Weil, D N

1989-05-01

This paper explores the impact of demographic changes on the housing market in the US, 1st by reviewing the facts about the Baby Boom, 2nd by linking age and housing demand using census data for 1970 and 1980, 3rd by computing the effect of demand on price of housing and on the quantity of residential capital, and last by constructing a theoretical model to plot the predictability of the jump in demand caused by the Baby Boom. The Baby Boom in the U.S. lasted from 1946-1964, with a peak in 1957 when 4.3 million babies were born. In 1980 19.7% of the population were aged 20-30, compared to 13.3% in 1960. Demand for housing was modeled for a given household from census data, resulting in the finding that demand rises sharply at age 20-30, then declines after age 40 by 1% per year. Thus between 1970 and 1980 the real value of housing for an adult at any given age jumped 50%, while the real disposable personal income per capita rose 22%. The structure of demand is such that the swelling in the rate of growth in housing demand peaked in 1980, with a rate of 1.66% per year. Housing demand and real price of housing were highly correlated and inelastic. If this relationship holds in the future, the real price of housing should fall about 3% per year, or 47% by 2007. The theoretical model, a variation of the Poterba model, ignoring inflation and taxation, suggests that fluctuations in prices caused by changes in demand are not foreseen by the market, even though they are predictable in principle 20 years in advance. As the effects of falling housing prices become apparent, there may be a potential for economic instability, but people may be induced to save more because their homes will no longer provide the funds for retirement.

Operational comparison of two types of tractor sprayers (microner and boom-type against wheat crop weeds

Directory of Open Access Journals (Sweden)

M Hamid

2015-09-01

Full Text Available Introduction: Nowadays, the tractor mounted boom sprayer is used in many agricultural fields. These sprayers have many advantages compared to other sprayers, but in Iran, their field efficiency is much lower than that of the developed countries, because the tank volume and consumption of pesticides per hectare is often so highthat spraying per hectare takesa long time for handling the solutions and transporting the sprayers. Also spray droplet size is ordinarily high and its distribution is unknot uniform. So, often spraying and dropping top parts of plants on the earth is inevitable. According to studies carried out in the country during the years 2005-2008 in the agricultural research centers in several provinces such as Khuzestan, four types of sprayers including tractor mounted sprayer, atomizer, microner, and electrostatic atomizer were studied and some of the results obtained include the following. From the point of view of percentage of crash crop, tractor mounted sprayer has the highest percentage, but microner sprayer had the lowest. From the point of view of the solution of consumption amount and spraying cost per hectare, the operation of the tractor mounted sprayer and electrostatic sprayer had the highest and the lowest ranks, respectively. Atomizer sprayer had the highest effect on the percentage amount of weed control, but it requires a high amount of water consumption, high drift and low operation (Safari and Lovaimi, 2010. Materials and Methods: The experiment was carried out during 2012-2013 in the field of agricultural research located in the Mollasani city located 20 km near Ahvaz. In this study, tractor mounted spinning disk sprayer (mounted microner sprayer was evaluated in comparison with conventional boom sprayer on weeds control. The treatments included medium (3500 rpm and low (2000 rpm speed rotation disk sprayer and two types of nozzle in conventional boom sprayer. One of them was an Italian tee jet nozzle and the

Radiological issues associated with the recent boom in oil and gas hydraulic fracturing

International Nuclear Information System (INIS)

Lopez, Alejandro

2013-01-01

As the worldwide hydraulic fracturing 'fracking' market continued to grow to an estimated $37 Billion in 2012, the need to understand and manage radiological issues associated with fracking is becoming imperative. Fracking is a technique that injects pressurized fluid into rock layer to propagate fractures that allows natural gas and other petroleum products to be more easily extracted. Radioactivity is associated with fracking in two ways. Radioactive tracers are frequently a component of the injection fluid used to determine the injection profile and locations of fractures. Second, because there are naturally-occurring radioactive materials (NORM) in the media surrounding and containing oil and gas deposits, the process of fracking can dislodge radioactive materials and transport them to the surface in the wastewater and gases. Treatment of the wastewater to remove heavy metals and other contaminates can concentrate the NORM into technologically-enhanced NORM (TENORM). Regulations to classify, transport, and dispose of the TENORM and other radioactive waste can be complicated and cumbersome and vary widely in the international community and even between states/provinces. In many cases, regulations on NORM and TENORM do not even exist. Public scrutiny and regulator pressure will only continue to increase as the world demands on oil and gas continue to rise and greater quantities of TENORM materials are produced. Industry experts, health physicists, regulators, and public communities must work together to understand and manage radiological issues to ensure reasonable and effective regulations protective of the public, environment, and worker safety and health are implemented. (authors)

Radiological issues associated with the recent boom in oil and gas hydraulic fracturing

Energy Technology Data Exchange (ETDEWEB)

Lopez, Alejandro [AMEC Environment and Infrastructure, 800 North Bell Ave., Pittsburgh, PA 15106 (United States)

2013-07-01

As the worldwide hydraulic fracturing 'fracking' market continued to grow to an estimated $37 Billion in 2012, the need to understand and manage radiological issues associated with fracking is becoming imperative. Fracking is a technique that injects pressurized fluid into rock layer to propagate fractures that allows natural gas and other petroleum products to be more easily extracted. Radioactivity is associated with fracking in two ways. Radioactive tracers are frequently a component of the injection fluid used to determine the injection profile and locations of fractures. Second, because there are naturally-occurring radioactive materials (NORM) in the media surrounding and containing oil and gas deposits, the process of fracking can dislodge radioactive materials and transport them to the surface in the wastewater and gases. Treatment of the wastewater to remove heavy metals and other contaminates can concentrate the NORM into technologically-enhanced NORM (TENORM). Regulations to classify, transport, and dispose of the TENORM and other radioactive waste can be complicated and cumbersome and vary widely in the international community and even between states/provinces. In many cases, regulations on NORM and TENORM do not even exist. Public scrutiny and regulator pressure will only continue to increase as the world demands on oil and gas continue to rise and greater quantities of TENORM materials are produced. Industry experts, health physicists, regulators, and public communities must work together to understand and manage radiological issues to ensure reasonable and effective regulations protective of the public, environment, and worker safety and health are implemented. (authors)

Stability of vitamin D3 and vitamin D2 in oil, fish and mushrooms after household cooking.

Science.gov (United States)

Ložnjak, Petra; Jakobsen, Jette

2018-07-15

Information on the retention of vitamin D in food following household cooking is scarce. So far the retention of its metabolites vitamin D 3 , vitamin D 2 , and 25-hydroxyvitamin D 3 has shown that the type of food and the cooking method are the essential determinants, and there is no significant difference between the metabolites. We investigated the retention of vitamin D 3 and vitamin D 2 in sunflower oil, vitamin D 3 in rainbow trout, and vitamin D 2 in button mushrooms. The investigated cooking methods were boiling at different pH, steam cooking, microwave cooking, pan-frying, and oven baking. There was no difference between the retention of vitamin D 3 and vitamin D 2 added to sunflower oil, which ranged from 70 to 99%. In rainbow trout, the retention of vitamin D 3 at 85-114% was not significantly different from 100%, except for panfrying at 85%. However, the retention of vitamin D 2 in mushrooms at 62-88% was significantly different from 100% (p ≤ 0.05). Copyright © 2018 Elsevier Ltd. All rights reserved.

Fracturing and Self-Healing in the Boom Clay: Evidences and Further Studies

International Nuclear Information System (INIS)

Bernier, Frederic

2001-01-01

The Boom Clay is considered as a potential host-rock for the disposal of Belgian radioactive waste. During the sinking of a new shaft to extend the underground facility HADES, an important fracturing has been evidenced around the excavation. Fracturing was already observed previously but to a lesser extent. The low support pressure imposed by the primary shaft lining, combined with the large time over which this support condition held, has favoured the decompression of the clay massif through delayed effects, and therefore the development of fracturing. In the frame of the overall performance of a radioactive waste repository, it is of prime importance to understand the fracturing process induced by excavation in Boom Clay, as well as the self-healing process. Some self-healing evidences have been observed around the HADES underground laboratory but need further investigation to be confirmed. This will be done in the SELFRAC EC project (Fractures and Self-healing within the Excavation Disturbed Zone in clays)

Retention of key employees in the oil field service sector

International Nuclear Information System (INIS)

Lee, S.

1999-01-01

Before 1994, Core Laboratories Canada Ltd. adopted local country benefit plans as stipulated by the government of the day. This approach meant that the company had many different benefit plans in place or in some situations no benefit plans at all, if the law of the land allowed such an approach. The company at this time viewed the lack of or minimal benefit plans as a cost saving venture. The parent company did not take onto account the effect on morale, employee retention and loyalty that these limited plans provided. A change in ownership in 1994 presented the opportunity for Core to re-assess its benefits package and introduce an incentive plan for its worldwide employees. The introduction of a pension with profits plan proved to be satisfying to employees, and the manager's incentive plan enabled the company to retain, with the exception of people who retired from the business, its entire management staff over a four year period. The stock option plan led to the retention of essential employees and reduced the turnover in this area. Discretionary bonuses succeeded in promoting recognition amongst employees as well as providing monetary reward, and the combination of benefits, incentive and stock option plans enabled the company to retain the vast majority of key employees and to entice selected individuals to the company from other organizations. 3 refs

75 FR 49843 - Regulated Navigation Area; Boom Deployment Strategy Testing, Great Bay, NH

Science.gov (United States)

2010-08-16

... will be marked with 32-inch floating balls to make the ends of each boom segment more visible to... east, a line drawn between the easternmost end of the Scammel Bridge (Route 4) in position 43[deg]07'41...

Regional modelling of the confined aquifers below the Boom clay in NE-Belgium

International Nuclear Information System (INIS)

Vandersteen, K.; Gedeon, M.; Marivoet, J.; Wouters, L.

2012-01-01

Document available in extended abstract form only. In the framework of the Belgian research program on the long term management of high-level and/or long-lived radioactive waste coordinated by ONDRAF/NIRAS, the Boom Clay is considered as a reference host rock for the geological disposal of high-level radioactive waste in NE-Belgium (Campine area). The hydrogeological program at SCK.CEN supports the long-term performance assessments of the geological disposal of radioactive waste by performing a phenomenological research of the aquifer systems surrounding the studied disposal system. One of the important components of this programme is the regional hydrogeological modelling. The regional hydrogeology is studied using two main models - the steady state Neogene aquifer model (NAM) and the transient deep aquifer pumping model (DAP), developed to characterize and quantify the regional groundwater flow in, respectively, the aquifers lying above the Boom Clay in the Nete catchment area (NAM), and the aquifers lying below the Boom Clay in the Campine area (DAP). This paper describes the most recent update of the DAP model. The DAP model represents the confined part of the groundwater system located stratigraphically below the Boom Clay. This includes the parts of the Oligocene aquifer, the Bartoon aquitard system and the Ledo-Paniselian-Brusselian aquifer buried under the Boom Clay. Due to the considerable pumping from these aquifers in combination with a limited recharge, a gradual decrease in groundwater levels has been observed in more than 30-year piezometric records. In the DAP model, the shallow aquifer system overlying the Boom Clay is replaced by fixed head boundaries: this aquifer system is dominated by close-to-surface hydrological processes and the heads fluctuate seasonally without any apparent long-term trend. In the horizontal direction, the model extends to the south as far as the outcrops of the major aquitards: the Maldegem Formation confining the Ledo

Lifting the US crude oil export ban: A numerical partial equilibrium analysis

International Nuclear Information System (INIS)

Langer, Lissy; Huppmann, Daniel; Holz, Franziska

2016-01-01

The upheaval in global crude oil markets and the boom in shale oil production in North America brought scrutiny on the US export ban for crude oil from 1975. The ban was eventually lifted in early 2016. This paper examines the shifts of global trade flows and strategic refinery investments in a spatial, game-theoretic partial equilibrium model. We consider detailed oil supply chain infrastructure with multiple crude oil types, distinct oil products, as well as specific refinery configurations and modes of transport. Prices, quantities produced and consumed, as well as infrastructure and refining capacity investments are endogenous to the model. We compare two scenarios: an insulated US crude oil market, and a counter-factual with lifted export restrictions. We find a significant expansion of US sweet crude exports with the lift of the export ban. In the US refinery sector, more (imported) heavy sour crude is transformed. Countries importing US sweet crude gain from higher product output, while avoiding costly refinery investments. Producers of heavy sour crude (e.g. the Middle East) are incentivised to climb up the value chain to defend their market share and maintain their dominant position. - Highlights: • We study the impacts of lifting the US crude ban on global oil flows and investments. • We find massive expansion of US sweet crude oil exports. • We analyze the resulting welfare effects for US producers, refiners and consumers. • We indicate the changes on global trade patterns. • We conclude that lifting the ban is the right policy for the US and the global economy.

Composition of essential oils isolated from the needles of Pinus uncinata and P. uliginosa grown in Poland.

Science.gov (United States)

Bonikowski, Radosław; Celiński, Konrad; Wojnicka-Półtorak, Aleksandra; Maliński, Tomasz

2015-02-01

The compositions of mountain pine (Pinus uncinata) and peat-bog pine (P. uliginosa) needle essential oils were investigated. Enantiomeric compositions of selected monoterpene hydrocarbons were also examined. Respectively, fifty-three and seventy-six components of the essential oils were identified using GC-MS and retention indexes. The main group of essential oil components of mountain pine needles were monoterpenes, and bornyl acetate constituted approximately 30% (46.3 g/100 g) of the oil. In peat-bog pine essential oil, monoterpenes and sesquiterpenes exhibited a similar content (ca. 40%). Bornyl acetate and α-pinene were the main constituents of both essential oils. In the essential oil of P. uncinata needles, limonene, camphene, myrcene and (E)-β-caryophyllene were also noticeable, while in the essential oil of P. uliginosa needles, Δ-car-3-ene, (E)-β-caryophyllene, germacrene D, δ-cadinene, germacrene D 4-ol and α-cadinol were present in notable quantities. In both essential oils, borneol propionate, isobutyrate, 2-methylbutyrate and isovalerate were detected. Their presence was confirmed by synthesis and analysis of the standards; retention indexes on a non-polar column are published herein.

Oil Dispersion with Abamectin as Active Ingredient

Directory of Open Access Journals (Sweden)

Slavica Gašić

2011-01-01

Full Text Available Abamectin was developed as an insecticide, nematocide and acaricide for use on a varietyof agricultural and horticultural crops. The products with this active ingredient can befound on the market mostly formulated as emulsifiable concentrate (EC. Usually producersrecommend using the EC formulation of abamectin together with some kind of adjuvants(natural oils to improve efficacy of the active ingredient. To overcome the efficacy problemwe tried to formulate the active ingredient abamectin as oil dispersion (OD. Oil dispersion,preferably based on naturally derived oils could improve pesticide efficacy. This type of pesticideformulation contains oil instead of water as in classical suspension concentrate andtypically has better retention and coverage. In the case of abamectin, in this investigationsoybean oil was used with the mixture of different nonionic emulsifiers. Content of abamecetinin formulation was 1.8 %. The developed formulation was tested for few importantparameters. The obtained physicochemical properties for the above mentioned formulationhave shown that it is stable and could be used in plant protection.

Pore-Scale Investigation of Micron-Size Polyacrylamide Elastic Microspheres (MPEMs) Transport and Retention in Saturated Porous Media

KAUST Repository

Yao, Chuanjin; Lei, Guanglun; Cathles, Lawrence M.; Steenhuis, Tammo S.

2014-01-01

Knowledge of micrometer-size polyacrylamide elastic microsphere (MPEM) transport and retention mechanisms in porous media is essential for the application of MPEMs as a smart sweep improvement and profile modification agent in improving oil recovery

Modelling of radionuclide migration and heat transport from an High-Level-Radioactive-Waste-repository (HLW) in Boom clay

International Nuclear Information System (INIS)

Put, M.; Henrion, P.

1992-01-01

For the modelling of the migration of radionuclides in the Boom clay formation, the analytical code MICOF has been updated with a 3-dimensional analytical solution for discrete sources. the MICOF program is used for the calculation of the release of α and β emitters from the HIGH LEVEL RADIOACTIVE WASTES (HLW). A coherent conceptual model is developed which describes all the major physico-chemical phenomena influencing the migration of radionuclides in the Boom clay. The concept of the diffusion accessible porosity is introduced and included in the MICOF code. Different types of migration experiments are described with their advantages and disadvantages. The thermal impact of the HLW disposal in the stratified Boom clay formation has been evaluated by a finite element simulation of the coupled heat and mass transport equation. The results of the simulations show that under certain conditions thermal convection cells may form, but the convective heat transfer in the clay formation is negligible. 6 refs., 19 figs., 2 tabs., 5 appendices

Carbon coatings with olive oil, soybean oil and butter on nano-LiFePO 4

Science.gov (United States)

Kim, Ketack; Jeong, Ji Hwa; Kim, Ick-Jun; Kim, Hyun-Soo

Kitchen oils (olive, soybean and butter) are selected for carbon coatings on LiFePO 4. The surface properties of LiFePO 4 are unknown or vary depending on synthetic methods. The multi-functional groups of fatty acids in the oils can orient properly to cope with the variable surface properties of LiFePO 4, which can lead to dense carbon coatings. The low price and low toxicity of kitchen oils are other advantages of the coating process. LiFePO 4 (D 50 = 121 nm)combined with the carbon coating enhances the rate capability. Capacities at the 2 C rate reach 150 mAh g -1 or higher. The charge retention values of 2.0 C/0.2 C are between 94.4 and 98.9%.

Asia-Pacific focus of coming LNG trade boom

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the Asia-Pacific region remains the centerpiece of a booming world trade in liquefied natural gas. Biggest growth in LNG demand is expected from some of the region's strongest economies such as Japan, South Korea, and Taiwan, Key LNG exporters such as Brunei, Malaysia, and Indonesia are scrambling to implement projects to meet that expected demand growth. Uncertainties cloud the outlook for Far East LNG trade, Australia, for one, is more cautious in pressing expansion of its LNG export capacity as more competing LNG expansions spring up around the world, notably in the Middle East and Africa

Influence of leaf retention on cutting propagation of Lavandula dentata L.

Directory of Open Access Journals (Sweden)

Claudine Maria de Bona

2010-08-01

Full Text Available Vegetative propagation of lavender offers several advantages over sexual propagation, among them crop homogeneity and yield of higher quality essential oil. However, Lavandula species have been propagated mostly by seeds and are said to be recalcitrant to rooting when propagated by cuttings. During cutting propagation, one of the important variables that influence the rooting capacity of cuttings is the leaf retention. The objective of this work was to evaluate the influence of leaf retention on rooting of L. dentata cuttings. Apical cuttings of L. dentata of 10 cm in length, keeping approximately 1/3, 1/2 or 2/3 of their leaves were planted in commercial substrate Plantmax HT® under intermittent mist. After two months, averages of root number, length of the longest root, root fresh and dry weights, and the survival percentage were evaluated. Root length and fresh weight were statistically greater with 2/3 of leaf retention and when fewer leaves were kept on the cuttings, lower means of root dry weight was observed. Under the conditions applied in this study, greater leaf retention was better for rooting of L. dentata cuttings.

Feasibility study of heavy oil recovery in the Midcontinent region (Kansas, Missouri, Oklahoma)

Energy Technology Data Exchange (ETDEWEB)

Olsen, D.K.; Johnson, W.I.

1993-08-01

This report is one of a series of publications assessing the feasibility/constraints of increasing domestic heavy oil production. Each report covers a select area of the United States. The Midcontinent (Kansas, Nssouri, Oklahoma) has produced significant oil, but contrary to early reports, the area does not contain the huge volumes of heavy oil that, along with the development of steam and in situ combustion as oil production technologies, sparked the area`s oil boom of the 1960s. Recovery of this heavy oil has proven economically unfeasible for most operators due to the geology of the formations rather than the technology applied to recover the oil. The geology of the southern Midcontinent, as well as results of field projects using thermal enhanced oil recovery (TEOR) methods to produce the heavy oil, was examined based on analysis of data from secondary sources. Analysis of the performance of these projects showed that the technology recovered additional heavy oil above what was produced from primary production from the consolidated, compartmentalized, fluvial dominated deltaic sandstone formations in the Cherokee and Forest City basins. The only projects producing significant economic and environmentally acceptable heavy oil in the Midcontinent are in higher permeability, unconsolidated or friable, thick sands such as those found in south-central Oklahoma. There are domestic heavy oil reservoirs in other sedimentary basins that are in younger formations, are less consolidated, have higher permeability and can be economically produced with current TEOR technology. Heavy oil production from the carbonates of central and wester Kansas has not been adequately tested, but oil production is anticipated to remain low. Significant expansion of Midcontinent heavy oil production is not anticipated because the economics of oil production and processing are not favorable.

Modelling of natural organic matter-linked radionuclide transport in Boom clay

International Nuclear Information System (INIS)

Govaerts, J.; Maes, N.

2012-01-01

Document available in extended abstract form only. In the framework of the Belgian research program on long term management of high-level and/or long-lived radioactive wastes coordinated by ONDRAF/NIRAS, Boom Clay is investigated for its potential to host a deep geological disposal repository. In order to demonstrate the suitability of the Boom Clay as a host rock, the mobility of critical radionuclides in this clay layer has been the subject of research during many years. As actinides, lanthanides and transition metals are known to form strong complexes with organic substances, the influence of the Natural Organic Matter (NOM) present in Boom Clay on the mobility of these critical radionuclides is of crucial importance. Interaction of radionuclides with OM present in Boom Clay could on the one hand retard the migration due to complexation/colloid interaction with the immobile OM, and on the other hand the mobility and solubility of the radionuclide can be enhanced by the formation of complexes/colloids with the mobile OM. The conceptual understanding (and its numerical modelling) of the kinetic stability and transport of these complexes/colloids is therefore regarded as highly important for the the long-term safety assesment of the geological disposal. This can be broken down into two subproblems: 1. Describing the transport behaviour of mobile OM in Boom Clay; 2. Describing the interaction of RN with mobile OM and the transport behaviour of the resulting complexes in Boom Clay. The first part of this paper revolves around the first subproblem, where a robust model for the description of the migration behaviour of Natural Organic Matter (NOM) is derived based on data from column migration experiments using 14 C-labelled NOM Tracer solution, obtained in the framework of the EC TRANCOM-II project. Clay plugs of different lengths and different Darcy velocities were used. Inverse modelling with the MATLAB and COMSOL numerical code was done in order to identify the

The oil boom in the US is the most significant fact of 2012, according to BP

International Nuclear Information System (INIS)

Anon.

2013-01-01

In 2012 the USA reached a peak in their production of oil (more than 1 million barrels) thanks to shale gas. The world economic recession that concerned most of OECD countries led to a decrease in energy consumption in the USA, European Union and Japan but because of the energy thirst of the BRICS countries the consumption of energy increased at the world scale as well as the CO 2 level. The world consumption of coal increased by 2.5% which is less than in the previous years but for the first time since 1970 coal reached almost 30% of the world consumption of primary energy. The article includes 3 tables giving the 2012 world consumption of oil, of coal according to continents and listing the places and quantities of proved reserves of natural gas. (A.C.)

Geochemical characterisation of kerogen from the Boom Clay Formation (Mol, Belgium) and evolution under different thermal stress

International Nuclear Information System (INIS)

Deniau, I.

2002-12-01

The Boom clay formation in Belgium has been chosen as test site for the disposal of high level radioactive wastes. The organic matter present in the clay (kerogen) is sensible to the thermal stress and can generate a huge number of gaseous and liquid compounds leading to local pH changes and to fracturing processes. In particular, some polar compounds can complex radionuclides. The samples analyzed in this work were taken in the underground laboratory of Mol at a 223 m depth. They have been analyzed in detail using geochemical methods (Rock-Eval pyrolysis, element analysis, transmission and scanning electron microscopy), spectroscopic methods (Fourier transformation infrared spectroscopy, solid state 13 C NMR, Raman) and pyrolytic methods (off-line, on-line and in sealed tubes combined with coupled CG/SM analyses). The study of a representative sample of this formation has permitted to characterize the organic matter at the molecular scale, to determine its fossilization mechanisms and the nature of the organic compounds trapped inside the kerogen. The organic matter of the Boom clays comes mainly from phyto-planktonic matter with an important contribution of terrestrial and bacterial matter. The degradation-recondensation played an important role in its preservation but the presence of numerous oxygenated molecules implies that oxidative incorporation also participated to this preservation. Finally, various products (hydrocarbons, oxygenated and nitrogenous polar compounds) trapped in significant amount inside the macro-molecular structure are released under a relatively weak thermal stress. Moreover several small polar organic molecules are released and can play a significant role in the retention or migration of radionuclides inside the geologic barrier. A sample submitted to a in-situ thermal stress of 80 deg. C during 5 years (Cerberus experiment) do not show any significant change in its kerogen structure with respect to the non-heated reference sample

Enhancing retention of partial dentures using elastomeric retention rings

Directory of Open Access Journals (Sweden)

Kakkirala Revathi

2015-01-01

Full Text Available This report presents an alternative method for the retention of partial dentures that relies on the engagement of tooth undercuts by a lining material. The lab procedures are also presented. A new maxillary and mandibular acrylic partial dentures were fabricated using elastomeric retention technique for a partially dentate patient. A partially dentate man reported difficulty in retaining his upper removable partial denture (RPD. The maxillary RPD was designed utilizing elastomeric retention technique. During follow-up, it was necessary to replace the retention rings due to wear. The replacement of the retention rings, in this case, was done through a chairside reline technique. Elastomeric retention technique provides exceptionally good retention can be indicated to stabilize, cushion, splint periodontally involved teeth, no enough undercut for clasps, eliminate extractions, single or isolated teeth.

Determination of Vaporization Properties and Volatile Hazardous Components Relevant to Kukersite Oil Shale Derived Fuel Oil Handling

Directory of Open Access Journals (Sweden)

Ada TRAUMANN

2014-09-01

Full Text Available The aim of this study was to investigate vaporization properties of shale fuel oil in relation to inhalation exposure. The shale fuel oil was obtained from kukersite oil shale. The shale oil and its light fraction (5 % of the total fuel oil were characterized by vapor pressure curve, molecular weight distribution, elemental composition and functional groups based on FTIR spectra. The rate of vaporization from the total fuel oil at different temperatures was monitored as a function of time using thermogravimetric analysis (TGA. It is shown that despite its relatively low vapor pressure at room temperature a remarkable amount of oil vaporizes influencing air quality significantly. From the TGA data the changes in the vapor pressure during vaporization process were estimated. Although the shale fuel oil has a strong, unpleasant smell, the main hazards to workplace air quality depend on the vaporization rate of different toxic compounds, such as benzene, toluene, xylene or phenolic compounds. The presence of these hazardous substances in the vapor phase of shale fuel oil was monitored using headspace analysis coupled with selective ion monitoring (SIM and confirmed by the NIST Mass Spectral library and retention times of standards. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4549

Sonic Boom Pressure Signature Uncertainty Calculation and Propagation to Ground Noise

Science.gov (United States)

West, Thomas K., IV; Bretl, Katherine N.; Walker, Eric L.; Pinier, Jeremy T.

2015-01-01

The objective of this study was to outline an approach for the quantification of uncertainty in sonic boom measurements and to investigate the effect of various near-field uncertainty representation approaches on ground noise predictions. These approaches included a symmetric versus asymmetric uncertainty band representation and a dispersion technique based on a partial sum Fourier series that allows for the inclusion of random error sources in the uncertainty. The near-field uncertainty was propagated to the ground level, along with additional uncertainty in the propagation modeling. Estimates of perceived loudness were obtained for the various types of uncertainty representation in the near-field. Analyses were performed on three configurations of interest to the sonic boom community: the SEEB-ALR, the 69o DeltaWing, and the LM 1021-01. Results showed that representation of the near-field uncertainty plays a key role in ground noise predictions. Using a Fourier series based dispersion approach can double the amount of uncertainty in the ground noise compared to a pure bias representation. Compared to previous computational fluid dynamics results, uncertainty in ground noise predictions were greater when considering the near-field experimental uncertainty.

Impregnation of bio-oil from small diameter pine into wood for moisture resistance

Science.gov (United States)

Thomas J. Robinson; Brian K. Via; Oladiran Fasina; Sushil Adhikari; Emily Carter

2011-01-01

Wood pyrolysis oil consists of hundreds of complex compounds, many of which are phenolic-based and exhibit hydrophobic properties. Southern yellow pine was impregnated with a pyrolysis oil-based penetrant using both a high pressure and vacuum impregnation systems, with no significant differences in retention levels. Penetrant concentrations ranging from 5-50% pyrolysis...

The effect of high pH alkaline solutions on the mineral stability of the Boom Clay - Batch experiments at 60 deg. C

International Nuclear Information System (INIS)

Honty, M.; De Craen, M.; Wang, L.; Madejova, J.; Czimerova, A.; Pentrak, M.; Stricek, I.; Van Geet, M.

2010-01-01

Boom Clay is currently viewed as a reference host formation for studies on deep geological disposal of radioactive waste in Belgium. The interactions between bulk rock Boom Clay and 0.1 M KOH, 0.1 M NaOH, 0.1 M Ca(OH) 2 , young cement water and evolved cement water solutions, ranging in pH from 12.5 to 13.2, were examined as static batch experiments at 60 deg. C to simulate alkaline plume perturbations, which are expected to occur in the repository due to the presence of concrete. Both liquids and solids were investigated at specific times between 90 and 510 days in order to control the elemental budget and to search for potential mineralogical alterations. Also, the clay fraction was separated from the whole-rock Boom Clay at the end of each run and characterized for its mineralogical composition. Thereby, the importance of the mineral matrix to buffer the alkaline attack and the role of organic matter to protect clay minerals were also addressed. The results indicate that the degree of geochemical perturbation in Boom Clay is dependent on the initial pH of the applied solution together with the nature of the major cation in the reactant fluids. The higher the initial pH of the media, the stronger its interaction with Boom Clay. No major non-clay mineralogical alteration of the Boom Clay was detected, but dissolution of kaolinite, smectite and illite occurred within the studied experimental conditions. The dissolution of clays is accompanied by the decrease in the layer charge, followed by a decrease in the cation-exchange capacity. The highest TOC values coincide with the highest total elemental concentrations in the leachates, and correspondingly, the highest dissolution degree. However, no quantitative link could be established between the degree of organic matter decomposition and clay dissolution.

Operational Satellite-based Surface Oil Analyses (Invited)

Science.gov (United States)

Streett, D.; Warren, C.

2010-12-01

During the Deepwater Horizon spill, NOAA imagery analysts in the Satellite Analysis Branch (SAB) issued more than 300 near-real-time satellite-based oil spill analyses. These analyses were used by the oil spill response community for planning, issuing surface oil trajectories and tasking assets (e.g., oil containment booms, skimmers, overflights). SAB analysts used both Synthetic Aperture Radar (SAR) and high resolution visible/near IR multispectral satellite imagery as well as a variety of ancillary datasets. Satellite imagery used included ENVISAT ASAR (ESA), TerraSAR-X (DLR), Cosmo-Skymed (ASI), ALOS (JAXA), Radarsat (MDA), ENVISAT MERIS (ESA), SPOT (SPOT Image Corp.), Aster (NASA), MODIS (NASA), and AVHRR (NOAA). Ancillary datasets included ocean current information, wind information, location of natural oil seeps and a variety of in situ oil observations. The analyses were available as jpegs, pdfs, shapefiles and through Google, KML files and also available on a variety of websites including Geoplatform and ERMA. From the very first analysis issued just 5 hours after the rig sank through the final analysis issued in August, the complete archive is still publicly available on the NOAA/NESDIS website http://www.ssd.noaa.gov/PS/MPS/deepwater.html SAB personnel also served as the Deepwater Horizon International Disaster Charter Project Manager (at the official request of the USGS). The Project Manager’s primary responsibility was to acquire and oversee the processing and dissemination of satellite data generously donated by numerous private companies and nations in support of the oil spill response including some of the imagery described above. SAB has begun to address a number of goals that will improve our routine oil spill response as well as help assure that we are ready for the next spill of national significance. We hope to (1) secure a steady, abundant and timely stream of suitable satellite imagery even in the absence of large-scale emergencies such as

Adaptive Aft Signature Shaping of a Low-Boom Supersonic Aircraft Using Off-Body Pressures

Science.gov (United States)

Ordaz, Irian; Li, Wu

2012-01-01

The design and optimization of a low-boom supersonic aircraft using the state-of-the- art o -body aerodynamics and sonic boom analysis has long been a challenging problem. The focus of this paper is to demonstrate an e ective geometry parameterization scheme and a numerical optimization approach for the aft shaping of a low-boom supersonic aircraft using o -body pressure calculations. A gradient-based numerical optimization algorithm that models the objective and constraints as response surface equations is used to drive the aft ground signature toward a ramp shape. The design objective is the minimization of the variation between the ground signature and the target signature subject to several geometric and signature constraints. The target signature is computed by using a least-squares regression of the aft portion of the ground signature. The parameterization and the deformation of the geometry is performed with a NASA in- house shaping tool. The optimization algorithm uses the shaping tool to drive the geometric deformation of a horizontal tail with a parameterization scheme that consists of seven camber design variables and an additional design variable that describes the spanwise location of the midspan section. The demonstration cases show that numerical optimization using the state-of-the-art o -body aerodynamic calculations is not only feasible and repeatable but also allows the exploration of complex design spaces for which a knowledge-based design method becomes less effective.

Literatura y arte latinoamericanos hoy: ¿Boom o Burbuja?

OpenAIRE

Sánchez, Yvette

2016-01-01

Resumen El presente artículo intenta caracterizar el reemplazamiento de las letras latinoamericanas por las artes visuales, en lo referido a su proyección internacional, en el último medio siglo. Mientras que el Boom latinoamericano de la literatura de los años 60 se extinguía paulatina y casi imperceptiblemente, hay críticos que afirman que la difusión, la demanda en el mercado y el explotado valor monetario de las artes visuales amenazan con desaparecer repentinamente. Este fenómeno suele e...

Pendulation control system and method for rotary boom cranes

Science.gov (United States)

Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

2002-01-01

A command shaping control system and method for rotary boom cranes provides a way to reduce payload pendulation caused by real-time input signals, from either operator command or automated crane maneuvers. The method can take input commands and can apply a command shaping filter to reduce contributors to payload pendulation due to rotation, elevation, and hoisting movements in order to control crane response and reduce tangential and radial payload pendulation. A filter can be applied to a pendulation excitation frequency to reduce residual radial pendulation and tangential pendulation amplitudes.

Field research on using oil herding surfactants to thicken oil slicks in pack ice for in-situ burning. Volume 1

International Nuclear Information System (INIS)

Buist, I.; Potter, S.; Nedwed, T.; Mullin, J.

2007-01-01

Laboratory and field studies have been performed in recent years to determine the capability of herding agents to thicken oil slicks among loose pack ice for the purpose of in situ burning. In loose pack ice conditions where booms are not practical, effective in situ burns may be possible if thin slicks could be thickened to the 2 to 5 mm range. However, specific chemical surface-active agents known as herders are need to clear and contain oil slicks on an open water surface. The agents spread quickly over a water surface into a monomolecular layer due to their high spreading coefficients. The best agents have spreading pressures in the mid 40 mN/m range. As such, only small quantities of these surfactants are needed to clear thin films of oil from large areas of water surface, and to contract it into thicker slicks. This paper summarized the previous studies that evaluated shoreline-cleaning agents with oil herding properties. However, the main focus of this paper was on the final phase of testing conducted at the Prudhoe Bay Fire Training Grounds in November 2006 in which a series of outdoor burns were conducted at the scale of 30 m 2 with herders and crude oil in a test pool containing pieces of ice. The tests revealed that when a herder was used on crude oil slicks that were otherwise unignitable, the slicks could be ignited and burned in situ in brash and slush ice conditions at temperatures as low as -17 degrees C. Both the removal rate and efficiencies for the herded slicks were comparable to the theoretical maximum achievable for mechanically contained slicks on open water. 13 refs., 1 tab., 18 figs

Cashing in on Tar Sands. RBS, UK banks and Canada's 'blood oil'

Energy Technology Data Exchange (ETDEWEB)

Evans, M.; Howarth, C.; Kellay, A.; Laboucan, B.J.; Mercredi, M.; Minio-Paluelo, M.; Schling, H.; Smith, K.; Thomas-Muller, C.; Wood, A.

2010-03-15

Tar sands extraction in Canada is devastating Indigenous communities, wildlife and vast areas of boreal forests, as well as being many times more carbon-intensive to produce than 'conventional' oil. The higher oil prices in recent years have meant that it's become a more attractive prospect for oil companies to expand their operations in the costly process of obtaining and processing the thick bitumen into a usable form. It's estimated that the industry is looking for a capital investment of 120-220 billion USD over the next 20 years to build the new pipelines, mines, refineries and upgraders that are necessary to sustain the boom. This report looks at the role that UK banks are playing in providing the necessary capital, and how RBS (Royal Bank of Scotland), which is 84% owned by the UK public, has been the bank the most heavily involved in underwriting loans to companies engaging in tar sands extraction.

Packaging, deployment, and panel design concepts for a truss-stiffened 7-panel precision deployable reflector with feed boom

Science.gov (United States)

Heard, Walter L., Jr.; Collins, Timothy J.; Dyess, James W.; Kenner, Scott; Bush, Harold G.

1993-01-01

A concept is presented for achieving a remotely deployable truss-stiffened reflector consisting of seven integrated sandwich panels that form the reflective surface, and an integrated feed boom. The concept has potential for meeting aperture size and surface precision requirements for some high-frequency microwave remote sensing applications. The packaged reflector/feed boom configuration is a self-contained unit that can be conveniently attached to a spacecraft bus. The package has a cylindrical envelope compatible with typical launch vehicle shrouds. Dynamic behavior of a deployed configuration having a 216-inch focal length and consisting of 80-inch-diameter, two-inch-thick panels is examined through finite-element analysis. Results show that the feed boom and spacecraft bus can have a large impact on the fundamental frequency of the deployed configuration. Two candidate rib-stiffened sandwich panel configurations for this application are described, and analytical results for panel mass and stiffness are presented. Results show that the addition of only a few rib stiffeners, if sufficiently deep, can efficiently improve sandwich panel stiffness.

Dynamic simulation of cable shovel specific energy in oil sands excavation

Energy Technology Data Exchange (ETDEWEB)

Awuah-Offei, K. [Missouri-Rolla Univ., Rolla, MO (United States). School of Materials, Energy and Earth Resources; Frimpong, S. [Missouri-Rolla Univ., Rolla, MO (United States). Dept. of Mining Engineering, Mining and Nuclear Engineering; Askari-Nasab, H. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering

2005-07-01

Oil sand excavation requires the use cable shovels which constitute one of the major costs in surface mining operations. Random occurrences of shales and limestones within the Athabasca oil sands formation result in varying shovel diggability and stress loading of the boom-crowd-dipper-teeth assembly which reduces digging efficiency. This inefficient use of cable shovels negatively affects the return on capital investment in these otherwise effective machines. In the Athabasca oil sands, varying stress loading has the potential to increase shovel downtime and increase maintenance costs. This paper presented a newly developed cable shovel simulator that uses shovel kinematics and dynamics, dynamic cutting resistance and payload models. It can model the specific energy needed to overcome the resistance to machine motion and material digging. The comprehensive model considers both machine motion and machine-formation interaction forces. It also provides a comprehensive theoretical assessment of shovel performance. The model is useful to mining engineers when examining both the machine operating parameters and material parameters that influence shovel performance. The study showed that bulk density is the most important material property influencing diggability. Operator preferences also influence the specific energy of excavation. 12 refs., 2 tabs., 6 figs.

Mitigating the impact of oil-palm monoculture on freshwater fishes in Southeast Asia.

Science.gov (United States)

Giam, Xingli; Hadiaty, Renny K; Tan, Heok Hui; Parenti, Lynne R; Wowor, Daisy; Sauri, Sopian; Chong, Kwek Yan; Yeo, Darren C J; Wilcove, David S

2015-10-01

Anthropogenic land-cover change is driving biodiversity loss worldwide. At the epicenter of this crisis lies Southeast Asia, where biodiversity-rich forests are being converted to oil-palm monocultures. As demand for palm oil increases, there is an urgent need to find strategies that maintain biodiversity in plantations. Previous studies found that retaining forest patches within plantations benefited some terrestrial taxa but not others. However, no study has focused on aquatic taxa such as fishes, despite their importance to human well-being. We assessed the efficacy of forested riparian reserves in conserving freshwater fish biodiversity in oil-palm monoculture by sampling stream fish communities in an oil-palm plantation in Central Kalimantan, Indonesia. Forested riparian reserves maintained preconversion local fish species richness and functional diversity. In contrast, local and total species richness, biomass, and functional diversity declined markedly in streams without riparian reserves. Mechanistically, riparian reserves appeared to increase local species richness by increasing leaf litter cover and maintaining coarse substrate. The loss of fishes specializing in leaf litter and coarse substrate decreased functional diversity and altered community composition in oil-palm plantation streams that lacked riparian reserves. Thus, a land-sharing strategy that incorporates the retention of forested riparian reserves may maintain the ecological integrity of fish communities in oil-palm plantations. We urge policy makers and growers to make retention of riparian reserves in oil-palm plantations standard practice, and we encourage palm-oil purchasers to source only palm oil from plantations that employ this practice. © 2015 Society for Conservation Biology.

The Funding of the Irish Domestic Banking System During the Boom?

OpenAIRE

Lane, Philip R.

2015-01-01

(read before the Society, 15th January 2015) This paper analyses the funding of the Irish domestic banking system during the boom period. We highlight: the shifting roles of deposit and bond funding; the prominence of foreign banks as funding counterparties; the role of interoffice funding; and the scale of US dollar and Sterling funding. From August 2007, the deterioration in funding conditions is clearly evident across a range of indicators.

Coated kapok fiber for removal of spilled oil

International Nuclear Information System (INIS)

Wang, Jintao; Zheng, Yian; Wang, Aiqin

2013-01-01

Highlights: ► A low-cost and biodegradable oil absorbent based on kapok fiber was prepared. ► The polymer-coated kapok fiber showed higher oil sorption capacity. ► Coated kapok fiber can be reused and the absorbed oil can be easily recovered. ► Adsorption of oil is spontaneous and exothermic physisorption and chemisorption. -- Abstract: Based on raw kapok fiber, two kinds of oil absorbers with high sorption capacity were prepared by a facile solution–immersion process. The coated polymer with low surface energy and rough fiber surface play important role in the retention of oil. The as-prepared fiber can quickly absorb gasoline, diesel, soybean oil, and paraffin oil up to above 74.5%, 66.8%, 64.4% and 47.8% of oil sorption capacity of raw fiber, respectively. The absorbed oils can be easily recovered by a simple vacuum filtration and the recovered coated-fiber still can be used for several cycles without obvious loss in oil sorption capacity. The thermodynamic study indicates that the adsorption process is spontaneous and exothermic, with complex physisorption and chemisorption. The results suggest that the coated fiber can be used as a low-cost alternative for the removal of oil spilled on water surface

Technetium migration in Boom Clay - Assessing the role of colloid-facilitated transport in a deep clay formation

International Nuclear Information System (INIS)

Bruggeman, C.; Martens, E.; Maes, N.; Jacops, E.; Van Gompel, M.; Van Ravestyn, L.

2010-01-01

Document available in extended abstract form only. The role of colloids - mainly dissolved natural organic matter (NOM, 50-150 mg/l) - in the transport of radionuclides in the Boom Clay formation (Mol, Belgium), has long since been a matter of (heavy) debate. For more than 20 years, batch experiments with Boom Clay suspensions showed a pronounced influence of the dissolved organic carbon concentration on the aqueous concentrations of different radionuclides like Tc, Np, Am and U. Moreover, small fractions of these radionuclides were also observed to elute almost un-retarded out of confined clay cores in percolation experiments. In the past years, a new conceptual model for the speciation of the long-lived fission product Technetium- 99 ( 99 Tc) under Boom Clay conditions has been drafted. In brief, the stable oxidation state of 99 Tc in these conditions is +IV, and, therefore, Tc solution concentrations are limited by the solubility of TcO 2 .nH 2 O(s). However, during reduction of TcVII (in the TcO 4 - form) to TcIV, precursor TcO 2 .nH 2 O colloids are formed, which are stabilised by the dissolved organic matter present in Boom Clay interstitial pore water, and in supernatants of Boom Clay batch suspensions. Moreover, this stabilisation process occurs in such a systematic way, that (conditional) interaction constants could be established, and the behaviour was described as a 'hydrophobic sorption', or, more accurately, a 'colloid-colloid' interaction. This conceptual model was implemented into PHREEQC geochemical and Hydrus transport code to come to a reactive transport model that was used to simulate both the outflow and the tracer profile in several long-term running percolation experiments (both in lab and under in situ conditions). To account for slow dissociation kinetics of Tc from the NOM colloid, a first-order kinetic rate equation was also added to the model. In order to describe the migration of colloidal particles (NOM), an

Microencapsulation of pequi pulp oil by complex coacervation

Directory of Open Access Journals (Sweden)

Priscilla Narciso Justi

2018-04-01

Full Text Available Abstract Pequi pulp oil, Caryocar brasiliense, is rich in carotenoids, antioxidant compound easily oxidized by the presence of heat, light and oxygen. In order to improve its stability, pequi oil was microencapsulated by complex coacervation using gelatin and Arabic gum as encapsulating agents. Twenty formulations were prepared using a 23 central composite rotational design. The influence of temperature, stirring velocity and core material in the oil coacervation were evaluated, aiming to preserve carotenoids present in the oil. The best yield values and carotenoids content were obtained at the midpoint of the design (7.5g core, 15.000rpm and 50°C. Particles showed asymmetric distribution, with diameter ranging from 15 to 145 µm and the efficiency of the encapsulation process, obtained by the retention of oil in the microcapsule, ranged from 66.58 to 96.50%, thus demonstrating the encapsulation efficiency of this method.

Ultrafiltration-based degumming of crude rice bran oil using a polymer membrane

Energy Technology Data Exchange (ETDEWEB)

Sehn, G.A.R.; GonCalves, L.A.G.; Ming, C.C.

2016-07-01

Membrane technology has been gaining momentum in industrial processes, especially in food technology. It is believed to simplify processes, reduce energy consumption, and eliminate pollutants. The objective was to study the performance of polyvinylidene fluoride (PVDF) and polyethersulfone (PES) polymeric membranes in the degumming of the miscella of crude rice bran oil by using a bench-scale tangential filtration module. In addition, oil miscella filtration techniques using hexane and anhydrous ethyl alcohol solvents were compared. All membranes showed the retention of phospholipids and high flow rates. However, the best performance was observed using the 50-kDa PVDF membrane in miscella hexane solvent, with a 95.5% retention of the phosphorus concentration (by a factor of 1.4), resulting in a permeate with 29 mg·kg−1 of phosphorus and an average flow rate of 48.1 L·m−2·h−1. This technology can be used as a low-pollution, economical alternative for the de-gumming of crude rice bran oil, being effective in the removal of hydratable and non-hydratable phospholipids, resulting in oils with a low phosphorus content. (Author)

Carbon coatings with olive oil, soybean oil and butter on nano-LiFePO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Kim, Ketack; Jeong, Ji Hwa; Kim, Ick-Jun; Kim, Hyun-Soo [Battery Research Group, Korea Electrotechnology Research Institute, Changwon, 641-600 (Korea)

2007-05-15

Kitchen oils (olive, soybean and butter) are selected for carbon coatings on LiFePO{sub 4}. The surface properties of LiFePO{sub 4} are unknown or vary depending on synthetic methods. The multi-functional groups of fatty acids in the oils can orient properly to cope with the variable surface properties of LiFePO{sub 4}, which can lead to dense carbon coatings. The low price and low toxicity of kitchen oils are other advantages of the coating process. LiFePO{sub 4} (D{sub 50} = 121 nm)combined with the carbon coating enhances the rate capability. Capacities at the 2C rate reach 150 mAh g{sup -1} or higher. The charge retention values of 2.0C/0.2C are between 94.4 and 98.9%. (author)

Selective retention of oils in aqueous mixtures using palygorskite treated with waterproof materials

International Nuclear Information System (INIS)

Matesanz, J.M.; Aisa, C.; Aragues, J.L.; Ovelleiro, J.L.

1994-01-01

An oil-selective absorbent has been developed from clay materials that is easy to manufacture and use, and provides good results in different working conditions, compared to conventional water treatment methods. The absorbent can be used in fixed beds in a column or spread directly onto an oil spill. The absorbent is a palygorskite (attapulgite) coated with a silicone. The silicone coating reduces the water absorption capacity of the palygorskite to near zero, but affects oil absorption capacity very little. The Westinghouse method was used to evaluate the absorption capacity of the silicone-coated palygorskite. The results indicate that the material could be a good choice for reducing the organic matter content of drinking water. 4 refs., 2 figs., 2 tabs

Decline in the risk of hepatitis A virus infection in China, a country with booming economy and changing lifestyles.

Science.gov (United States)

Xu, Zhi-Yu; Wang, Xuan-Yi; Liu, Chang-Qing; Li, Yang-Ting; Zhuang, Fang-Chen

2008-10-01

The objective of the study was to identify the protective factors for the rapid decline in the risk of hepatitis A virus (HAV) infection in China between 1990 and 2006. Results of serological follow-up and data on annual hepatitis A incidence were analysed and correlated with economic growth and HAV vaccine output during the same period. In conclusion, both HAV vaccination and changing lifestyles associated with the booming economy contributed to the rapid risk decline. Changing lifestyles played a major role in the decline especially in the areas with booming economy.

Homogeneity vs. Heterogeneity of Porosity in Boom Clay

International Nuclear Information System (INIS)

Hemes, Susanne; Desbois, Guillaume; Urai, Janos L.; De Craen, Mieke; Honty, Miroslav

2013-01-01

Microstructural investigations on Boom Clay at nano- to micrometer scale, using BIB-SEM methods, result in porosity characterization for different mineral phases from direct observations on high resolution SE2-images of representative elementary areas (REAs). High quality, polished surfaces of cross-sections of ∼ 1 mm 2 size were produced on three different samples from the Mol-Dessel research site (Belgium). More than 33,000 pores were detected, manually segmented and analyzed with regard to their size, shape and orientation. Two main pore classes were defined: Small pores (< 500 nm (ED)) within the clay matrices of samples and =big' pores (> 500 nm (ED)) at the interfaces between clay and non-clay mineral (NCM) grains. Samples investigated show similar porosities regarding the first pore-class, but differences occur at the interfaces between clay matrix and NCM grains. These differences were interpreted to be due to differences in quantitative mineralogy (amount of non-clay mineral grains) and grain-size distributions between samples investigated. Visible porosities were measured as 15 to 17 % for samples investigated. Pore-size distributions of pores in clay are similar for all samples, showing log-normal distributions with peaks around 60 nm (ED) and more than 95 % of the pores being smaller than 500 nm (ED). Fitting pore-size distributions using power-laws with exponents between 1.56 and 1.7, assuming self-similarity of the pore space, thus pores smaller than the pore detection resolution following the same power-laws and using these power-laws for extrapolation of pore-size distributions below the limit of pore detection resolution, results in total estimated porosities between 20 and 30 %. These results are in good agreement with data known from Mercury Porosimetry investigations (35-40 % porosity) and water content porosity measurements (∼ 36 %) performed on Boom Clay. (authors)

Impact of Crude Oil Quality on the Refining Conditions and Composition of Nutraceuticals in Refined Palm Oil.

Science.gov (United States)

Sampaio, Klicia A; Ayala, Jose Vila; Van Hoed, Vera; Monteiro, Simone; Ceriani, Roberta; Verhé, Roland; Meirelles, Antonio J A

2017-08-01

Palm oil is the major vegetable oil used worldwide due to its unique properties. The effect of crude palm oil acidity on the final free fatty acids (FFA) content, neutral oil loss (NOL), and nutraceutical compounds, such as carotenes, total tocols (tocopherols and tocotrienols), squalene, and phytosterols was investigated. A central composite design was employed to study the influence of the refining conditions: temperature (200 to 260 °C), steam percentage (0.5% to 3.5%), and initial FFA content (2.2% to 6.0%) on the quality of the refined product. The results revealed that initial palm oil acidity is a statistically important parameter to obtain commercially acceptable values for final FFA content. The increase of temperature presented the most important effect on the reduction of all nutraceutical compounds. The highest tocopherols (88%), phytosterols (98%), and squalene retention (84%) was obtained when applying the mildest temperature (200 °C). From the experimental results, 3 equations were generated enabling the prediction of the free fatty acids content, the tocols content, and the losses of neutral oil. Therefore, this work contributes to the understanding and optimization of the process for the production of palm oil with high nutraceutical quality and low free fatty acid contents. © 2017 Institute of Food Technologists®.

Refinery boom in Southeast Asia

International Nuclear Information System (INIS)

Gruson, J.F.; Virondaud, C.

1996-01-01

The Asia demand for oil is increasing dramatically, particularly in the non OECD countries, which represent, today more than 15 % of the world oil market. The expected economic growth in these areas should contribute to a rise in oil demand by about 5.4 per year and hence to a significant increase of this share to 25 % in 2010; virtually a large part of this evolution will come from the transportation sector. The proceeding investments of the regional, refining industry are very high (some evaluations come to around 140 billion of dollars), all the more the protection of the environment takes an increasing significant place. Accordingly the most important challenge to be taken up by these countries will be to mobilize long term fundings to develop and adapt the capabilities of the refineries to meet the growth of gasoline and gas oil demand. The contribution of private operators or capital will be necessary, but will depend strongly on refining margin improvement and on progress of free market areas announced by several countries. (authors)

Analysis of the Effects of Streamwise Lift Distribution on Sonic Boom Signature

Science.gov (United States)

Yoo, Paul

2013-01-01

Investigation of sonic boom has been one of the major areas of study in aeronautics due to the benefits a low-boom aircraft has in both civilian and military applications. This work conducts a numerical analysis of the effects of streamwise lift distribution on the shock coalescence characteristics. A simple wing-canard-stabilator body model is used in the numerical simulation. The streamwise lift distribution is varied by fixing the canard at a deflection angle while trimming the aircraft with the wing and the stabilator at the desired lift coefficient. The lift and the pitching moment coefficients are computed using the Missile DATCOM v. 707. The flow field around the wing-canard- stabilator body model is resolved using the OVERFLOW-2 flow solver. Overset/ chimera grid topology is used to simplify the grid generation of various configurations representing different streamwise lift distributions. The numerical simulations are performed without viscosity unless it is required for numerical stability. All configurations are simulated at Mach 1.4, angle-of-attack of 1.50, lift coefficient of 0.05, and pitching moment coefficient of approximately 0. Four streamwise lift distribution configurations were tested.

Design study for a macropermeability test in an argillaceous formation (Boom clay)

International Nuclear Information System (INIS)

Bronders, J.

1992-01-01

In the present report a test design has been developed for determining the in-situ permeability of the Boom clay on a large scale at the Mol site (Belgium). Since in the Boom clay at the Mol site an Underground Repository Facility (URF) is operational the test has been designed to be run in or from this facility. The proposal is an in-situ macropermeability test with a set-up comprising a central borehole (metric scale in length) designed to allow various types of control of the water-level, surrounded by a lattice of piezometers installed in the clay mass for the monitoring of the interstitial water pressure changes in function of the various water-level controls. In one part the report describes the potential set-ups and a theoretical background as far as it can be done on the basis of existing literature and experiments. In a second part the method (technical and practical data of a test set-up) is described and documented. The method proposed is largely based on the several years of expertise gained within the field of in-situ migration and hydrogeologic investigations in the Hades-URF. 14 refs., 9 figs., 2 tabs

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

Science.gov (United States)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan A.

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called "Low Noise Propulsion for Low Boom Aircraft", and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

Thermal shock induced dynamics of a spacecraft with a flexible deploying boom

Science.gov (United States)

Shen, Zhenxing; Li, Huijian; Liu, Xiaoning; Hu, Gengkai

2017-12-01

The dynamics in the process of deployment of a flexible extendible boom as a deployable structure on the spacecraft is studied. For determining the thermally induced vibrations of the boom subjected to an incident solar heat flux, an axially moving thermal-dynamic beam element based on the absolute nodal coordinate formulation which is able to precisely describe the large displacement, rotation and deformation of flexible body is presented. For the elastic forces formulation of variable-length beam element, the enhanced continuum mechanics approach is adopted, which can eliminate the Poisson locking effect, and take into account the tension-bending-torsion coupling deformations. The main body of the spacecraft, modeled as a rigid body, is described using the natural coordinates method. In the derived nonlinear thermal-dynamic equations of rigid-flexible multibody system, the mass matrix is time-variant, and a pseudo damping matrix which is without actual energy dissipation, and a heat conduction matrix which is relative to the moving speed and the number of beam element are arisen. Numerical results give the dynamic and thermal responses of the nonrotating and spinning spacecraft, respectively, and show that thermal shock has a significant influence on the dynamics of spacecraft.

Big boom ahead for New Brunswick

Energy Technology Data Exchange (ETDEWEB)

Reid, Wes

2011-10-15

The technological advances in shale gas extraction make it now feasible to exploit this hydrocarbon resource. Shale gas activity has been booming recently in New Brunswick and the province possibly holds more than 80 trillion cubic feet of natural gas. A new pipeline system has already been put in place. New Brunswick is a socially, politically and economically stable region. In addition, the royalty system in New Brunswick is competitive. For example, right now Corridor Resources Inc. is working on three major projects and some existing production from the McCully field in New Brunswick. Corridor also has prospects at Anticosti Island, Prince Edward Island and Old Harry. Although the government can benefit from royalty revenues generated by the hydrocarbon industry, environmental issues are of concern to citizens' groups, environmentalists and political opposition parties. A moratorium has been called for to make sure the proper protections are in place and the industry is adequately monitored.

Hollow Cylinder Tests on Boom Clay: Modelling of Strain Localization in the Anisotropic Excavation Damaged Zone

Science.gov (United States)

François, Bertrand; Labiouse, Vincent; Dizier, Arnaud; Marinelli, Ferdinando; Charlier, Robert; Collin, Frédéric

2014-01-01

Boom Clay is extensively studied as a potential candidate to host underground nuclear waste disposal in Belgium. To guarantee the safety of such a disposal, the mechanical behaviour of the clay during gallery excavation must be properly predicted. In that purpose, a hollow cylinder experiment on Boom Clay has been designed to reproduce, in a small-scale test, the Excavation Damaged Zone (EDZ) as experienced during the excavation of a disposal gallery in the underground. In this article, the focus is made on the hydro-mechanical constitutive interpretation of the displacement (experimentally obtained by medium resolution X-ray tomography scanning). The coupled hydro-mechanical response of Boom Clay in this experiment is addressed through finite element computations with a constitutive model including strain hardening/softening, elastic and plastic cross-anisotropy and a regularization method for the modelling of strain localization processes. The obtained results evidence the directional dependency of the mechanical response of the clay. The softening behaviour induces transient strain localization processes, addressed through a hydro-mechanical second grade model. The shape of the obtained damaged zone is clearly affected by the anisotropy of the materials, evidencing an eye-shaped EDZ. The modelling results agree with experiments not only qualitatively (in terms of the shape of the induced damaged zone), but also quantitatively (for the obtained displacement in three particular radial directions).

Thiolated silicone oil: Synthesis, gelling and mucoadhesive properties

Science.gov (United States)

Partenhauser, Alexandra; Laffleur, Flavia; Rohrer, Julia; Bernkop-Schnürch, Andreas

2015-01-01

The aim of this study was the development of novel thiolated silicone oils and their evaluation with regard to gelling and mucoadhesive properties. A thiol coupling of 220 ± 14 and 127 ± 33 μmol/g polymer for 3-mercaptopropionic acid (MPA)- and cysteine-coupled silicone oil was determined, respectively. The dynamic viscosity of MPA–silicone raised significantly (p Thiolated silicone oils can be regarded superior in comparison to commonly used silicone oils due to a prolonged retention time in the small intestine as site of action. Gelling and mucoadhesive features are advantageous for antiflatulent as well as mucoprotective biomaterials. Thus, these novel thiomers seem promising for an upgrade of currently available products for the treatment of dyspepsia, reflux oesophagitis and even inflammatory bowel diseases such as ulcerative colitis or Crohn’s disease. PMID:25660565

Formulating orange oil-in-water beverage emulsions for effective delivery of bioactives: Improvements in chemical stability, antioxidant activity and gastrointestinal fate of lycopene using carrier oils.

Science.gov (United States)

Meroni, Erika; Raikos, Vassilios

2018-04-01

The influence of carrier oil type on the chemical stability, antioxidant properties and bioaccessibility of lycopene in orange oil-in-water beverage emulsions was investigated. The emulsions were formulated with orange oil (A), which was partially (50%) replaced with tributyrin (B) or corn oil (C) because of their distinctively different fatty acid composition. The addition of corn oil enhanced the physical stability of the beverage during chilled storage by inhibiting Ostwald ripening. The formation of oxidation products was insignificant after storage for 28 days at 4 °C, regardless the type of added oil. Lycopene was more susceptible to chemical degradation in the presence of unsaturated, long chain triglycerides and the retention followed the order: A (87.94%), B (64.41%) and C (57.39%). Interestingly, bioaccessibility of lycopene was significantly lower for emulsions formulated with 50% corn oil as opposed to 100% orange oil as indicated by the simulated in vitro gastric digestion model. Copyright © 2018 Elsevier Ltd. All rights reserved.

Barrier to entry : boom or no boom, oilsands outsiders hit barriers to technology uptake

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2009-05-15

Oil sands extraction and upgrading innovators are becoming annoyed at what they perceive as the closed door attitude of existing producers. This article discussed various technologies for oil sands extraction and upgrading such as in-situ fireflooding; electro-thermal stimulation; solvent-enhanced steam-assisted gravity drainage (SAGD); as well as oil-digesting bugs and miracle solvents and oleophilic screening and borehole mining. Oilpatch outsiders are offering the oilsands industry green alternatives to hot water flotation separation technology and the heavily natural gas-reliant SAGD extraction method. The author cautioned that these solutions and alternatives are largely unproven and untested. Promoters of new technologies claim that while evolutionary technologies that could mesh readily with existing operations are generally welcomed by industry, the so-called disruptive technologies are rarely adopted as producers seek to protect their investments. Several examples were provided in the article that demonstrated barriers to entry into the market such as Houston-based Planet Resource Recovery. The company was promoting a proprietary chemical product called PetroLuxus, which used nanoscale technology to interrupt the bonding of metals and hydrocarbons in soil, water and oil and gas applications. Early efforts to showcase the product, entirely at the company's expense, were rejected despite success in certified independent lab tests using Utah tar sands. The oleophilic process was also described in detail. Last, the article discussed BioTiger, a natural microbial consortium that was the product of eight years of extensive microbiology screening and characterization of bacteria isolates collected from a century-old oil refinery waste lagoon in Poland. A discussion of technologies for borehole mining concluded the article. 1 tab., 5 figs.

Amsterdam Book Design: Irma Boom, Hansje van Halem, Lesley Moore = Amsterdamskij knižnyj dizajn

NARCIS (Netherlands)

Lommen, M.

2012-01-01

Published on the occasion of the exhibition 'Amsterdam Book Design : Irma Boom, Hansje van Halem, Lesley Moore', from May 26th until June 17th 2012 in the creative platform Taiga Space, Saint Petersburg. In cooperation with Netherlands Institute Saint-Petersburg.

Characterization of crude oils and petroleum products: (I Elution liquid chromatographic separation and gas chromatographic analysis of crude oils and petroleum products

Directory of Open Access Journals (Sweden)

E.O. Odebunmi

2002-12-01

Full Text Available Some physical and chemical properties of samples of light, medium and heavy Nigerian crude oils and petroleum products including gasoline, kerosene and engine oil have been measured and are reported in this paper. The crude oils and petroleum products have also been characterized by fractional distillation and elution liquid chromatography. The fractions obtained from elution liquid chromatography were analyzed using gas chromatography (GC. The GC fractions were identified by comparing the retention time of peaks in the unknown samples with those of components of calibration standard mixtures. The importance of the physico-chemical properties and the significance of the fractional distillation and chromatographic separation methods to industrial process operations have been discussed.

Highly porous oil sorbent based on hollow fibers as the interceptor for oil on static and running water

Energy Technology Data Exchange (ETDEWEB)

Dong, Ting [College of Textiles, Donghua University, Shanghai 201620 (China); Cao, Shengbin [College of Textiles, Donghua University, Shanghai 201620 (China); School of Mechanical Engineering, Shanghai Dianji University, Shanghai 201306 (China); Xu, Guangbiao, E-mail: guangbiao_xu@dhu.edu.cn [College of Textiles, Donghua University, Shanghai 201620 (China); Key Laboratory of Textile Science and Technology Ministry of Education, Donghua University, Shanghai 201620 (China)

2016-03-15

Highlights: • Highly porous sorbent was made up of kapok and PET fibers. • The sorbent was prepared by air-laying-bonding method. • The sorbent showed much higher oil sorption capacity than 100% loose kapok fibers. • The sorbent showed high intercepting efficiency to oils on water. • The runing of water significantly accelerated the oil leakage. - Abstract: Highly porous fibrous assembly made by kapok and hollow PET fibers was prepared by the air-laying-bonding method, and used as the interceptor for oils on static and running water. SEM showed that the vast majority of kapok and PET fibers in the assembly was intact and retained their hollow lumens, with the assembly's porosity high to 98.03%. Oil sorption tests exhibited that kapok/PET assembly could absorb 63.00 g/g of vegetable oil and 58.50 g/g of used motor oil, with high oil retention after 24 h dripping. In static condition of oil interception, the two oils started to leak at around 20 min for 10-mm thick kapok/PET wall. The time for that was prolonged with increasing the thickness of kapok/PET wall. After oil breakthrough, continuous oil leaking took place. The typical leakage was divided into three stages in which oils leaked separately in sharply increased rate, reduced rate and finally gently. In running condition, oils leaked in markedly quicker way than that in static condition, with initial leakage of oils shortened to less 6 min when the water ran at 60.35 ml/s. The leakage of oils was considerably accelerated with increasing running rates.

Highly porous oil sorbent based on hollow fibers as the interceptor for oil on static and running water

International Nuclear Information System (INIS)

Dong, Ting; Cao, Shengbin; Xu, Guangbiao

2016-01-01

Highlights: • Highly porous sorbent was made up of kapok and PET fibers. • The sorbent was prepared by air-laying-bonding method. • The sorbent showed much higher oil sorption capacity than 100% loose kapok fibers. • The sorbent showed high intercepting efficiency to oils on water. • The runing of water significantly accelerated the oil leakage. - Abstract: Highly porous fibrous assembly made by kapok and hollow PET fibers was prepared by the air-laying-bonding method, and used as the interceptor for oils on static and running water. SEM showed that the vast majority of kapok and PET fibers in the assembly was intact and retained their hollow lumens, with the assembly's porosity high to 98.03%. Oil sorption tests exhibited that kapok/PET assembly could absorb 63.00 g/g of vegetable oil and 58.50 g/g of used motor oil, with high oil retention after 24 h dripping. In static condition of oil interception, the two oils started to leak at around 20 min for 10-mm thick kapok/PET wall. The time for that was prolonged with increasing the thickness of kapok/PET wall. After oil breakthrough, continuous oil leaking took place. The typical leakage was divided into three stages in which oils leaked separately in sharply increased rate, reduced rate and finally gently. In running condition, oils leaked in markedly quicker way than that in static condition, with initial leakage of oils shortened to less 6 min when the water ran at 60.35 ml/s. The leakage of oils was considerably accelerated with increasing running rates.

A study on the secondary consolidation of Boom Clay at Essen site under loading and unloading compression

International Nuclear Information System (INIS)

Deng, Y.F.; Cui, Y.J.; Tang, A.M.; Li, X.L.; Sillen, X.

2010-01-01

Document available in extended abstract form only. Boom clay formation, a thick deposit of over-consolidated marine clay has been selected as a possible host material of nuclear waste disposal in Belgium. For this purpose, its deformation behaviour, especially its long-term deformation behaviour (secondary consolidation) is essential for the safety of the whole storage system and therefore needs to be investigated deeply. In the present work, odometer consolidation tests were performed on Boom clay taken from the Essen site. The loading and unloading were run in steps and the secondary consolidation coefficient C α (C α = de/dlogt) was determined for each step. This allows the secondary consolidation behaviour to be analysed. Four soil cores of Boom clay were taken from the site of Essen, Belgium, at the depths of 220-248 m. The geotechnical identification characteristics of these cores are similar: specific gravity, γ s = 2.64-2.68; liquid limit, w L = 68-78%; plastic limit, w P = 29-33%; and plastic index, I P 36-45. The soil water content (w) is between 26.5 and 29.7% and the void ratio (e) between 0.700 and 0.785. The blue methylene values (VBS) are equally similar, VBS = 6.20-6.67 (g/100 g). The clay fraction (< 2 μm) is relatively high (more than 50%). An example of the results obtained is presented (void ratio versus vertical stress and secondary consolidation coefficient versus vertical stress, determined in the e/log t plot) for the core taken at 227 m depth. After the installation of specimen in the odometer cell, an initial loading to the in-situ stress gave rise to a decrease of the void ratio from 0.730 to 0.651. The drainage system was then saturated for the subsequent loading/unloading paths in steps. The results show that the void ratio decreased to 0.270 when the vertical stress reached σ v = 32 MPa. A compression index Cc of about 0.31 can be estimated and the swelling index is estimated at 0.14. C α > 0 during loading and C α < 0 during

Black Gold, White Power: Mapping Oil, Real Estate, and Racial Segregation in the Los Angeles Basin, 1900-1939

Directory of Open Access Journals (Sweden)

Daniel G. Cumming

2018-03-01

Full Text Available In 1923, Southern California produced over twenty percent of the world’s oil. At the epicenter of an oil boom from 1892 to the 1930s, Los Angeles grew into the nation’s fifth largest city. By the end of the rush, it had also become one of the most racially segregated cities in the country. Historians have overlooked the relationship between industrialists drilling for oil and real estate developers codifying a racist housing market, namely through “redlining” maps and mortgage lending. While redlining is typically understood as a problem of horizontal territory, this paper argues that the mapping of the underground—the location and volume of subterranean oil fields, in particular—was a crucial technique in underwriting urban apartheid. Mapping technologies linked oil exploitation with restrictive property rights, constructing oil as a resource and vertically engineering a racialized housing market. By focusing on petro-industrialization interlocked with segregationist housing, this article reveals an unexamined chapter in Los Angeles’s history of resource exploitation and racial capitalism. Moreover, it contributes to a growing literature on the social production of resources, extractive technology and political exclusion, and the technoscientific practices used by states and corporations to mine the underground while constructing metropolitan inequality above ground.

The Canon is el Boom, et. al., or the Hispanic Difference

OpenAIRE

Bell-Villada, Gene H.

2002-01-01

In his article, Gene H. Bell-Villada's "The Canon is el Boom, et. al., or the Hispanic Difference," argues that the rich, globally acclaimed, foundational yet contestatory prose literature produced in Latin America allows teachers and scholars of Spanish to teach what is essentially the "canon" via work that is still fresh, yet historically provocative. Bell-Villada argues that in a time of reconsidering the importance of literature in literature programs, programs of Spanish language and cul...

Oil spills in mangroves: A conceptual model based on long-term field observations

Energy Technology Data Exchange (ETDEWEB)

Jacobi, C.M.; Schaeffer-Novelli, Y. (Sao Paulo Univ. (Brazil))

1990-11-01

A conceptual model is proposed for evaluating residence time of oil in mangrove environments. It assumes that, after oil has spread over a mangrove coastline, it remains in the environment by retention in the sediment. Removal is mainly in association with seaward particle export. Since detritus export depends on tidal flush, the area affected by an oil spill can be devided into sections parallel to the coastline having different removal rates increasing seaward (under little river flush and regular topography). 1 fig., 11 refs.

Model studies on the release of aroma compounds from structured and nonstructured oil systems using proton-transfer reaction mass spectrometry.

Science.gov (United States)

Landy, Pascale; Pollien, Philippe; Rytz, Andreas; Leser, Martin E; Sagalowicz, Laurent; Blank, Imre; Spadone, Jean-Claude

2007-03-07

Relative retention, volatility, and temporal release of volatile compounds taken from aldehyde, ester, and alcohol chemical classes were studied at 70 degrees C in model systems using equilibrium static headspace analysis and real time dynamic headspace analysis. These systems were medium-chain triglycerides (MCT), sunflower oil, and two structured systems, i.e., water-in-oil emulsion and L2 phase (water-in-oil microemulsion). Hydrophilic domains of the emulsion type media retained specifically the hydrophilic compounds and alcohols. Four kinetic parameters characterizing the concentration- and time-dependent releases were extracted from the aroma release curves. Most of the kinetic parameter values were higher in structured systems than in oils particularly when using MCT. The oil nature was found to better control the dynamic release profiles than the system structures. The release parameters were well-related (i) to the volatile hydrophobicity as a function of the oil used and (ii) to the retention data in the specific case of the L2 phase due to a specific release behavior of alcohols.

Fate of dispersed marine fuel oil in sediment under pre-spill application strategy

International Nuclear Information System (INIS)

Jian Hua

2004-01-01

A comparison of the movement of dispersed oil in marine sediment under two dispersant application scenarios, applied prior to and after oil being spilled overboard, was examined. The pre-spill application scenario caused much less oil to be retained in the top sediment than post-spill scenario. The difference in oil retention in the top sediment between pre- and post-spill application scenario increased with increase in fuel oil temperature. For fuel oil above 40 o C, the difference in the effect of pre-spill application strategy under various water temperatures was negligible. When soap water was used as replacement for chemical dispersant, almost one-half as much oil was retained in the top sediment as that when using chemical dispersant. The adsorption of dispersed oil to the top sediment was almost proportionally decreased with doubling of soap dosage. (Author)

Technology needs for the later phases of an oil spill. Volume 1

International Nuclear Information System (INIS)

Goodman, R.

2007-01-01

The phases of an oil spill response can be classified as initial response, project phase, end phase and the monitoring phase. The initial on-water phase of the response or shoreline cleanup includes the development of contingency planning, stockpiling of equipment and research into response equipment for removing oil on water. Lack of planning for a response can lead to an initial response that has less than satisfactory results. An initial assessment of the oil spill response begins at the moment the spill occurs and continues for days, depending on the quality of the initial response. This phase includes the use of booms, skimmers, dispersants and in-situ burning. It was emphasized that oil spill research should focus on gathering scientific information needed to make decisions during the project phase and beyond. Typically, this will involve the study of long-term impacts and should be undertaken in a research environment in order to apply new data to any spill scenario. This paper highlighted knowledge needs to support decisions in the cleanup phase. The Exxon Valdez incident provided information on the long-term impacts of a variety of cleanup techniques. This paper also addressed damage assessment and restoration issues along with the decision to terminate a response. Once a response has been terminated, long-term monitoring of the ecosystem begins in order to identify the spill impact. 9 refs., 6 figs

Lifecycle effects of a recession on health behaviors: Boom, bust, and recovery in Iceland.

Science.gov (United States)

Ásgeirsdóttir, Tinna Laufey; Corman, Hope; Noonan, Kelly; Reichman, Nancy E

2016-03-01

This study uses individual-level longitudinal data from Iceland, a country that experienced a severe economic crisis in 2008 and substantial recovery by 2012, to investigate the extent to which the effects of a recession on health behaviors are lingering or short-lived and to explore trajectories in health behaviors from pre-crisis boom, to crisis, to recovery. Health-compromising behaviors (smoking, heavy drinking, sugared soft drinks, sweets, fast food, and tanning) declined during the crisis, and all but sweets continued to decline during the recovery. Health-promoting behaviors (consumption of fruit, fish oil, and vitamins/minerals and getting recommended sleep) followed more idiosyncratic paths. Overall, most behaviors reverted back to their pre-crisis levels or trends during the recovery, and these short-term deviations in trajectories were probably too short-lived in this recession to have major impacts on health or mortality. A notable exception is for binge drinking, which declined by 10% during the 2 crisis years, continued to fall (at a slower rate of 8%) during the 3 recovery years, and did not revert back to the upward pre-crisis trend during our observation period. These lingering effects, which directionally run counter to the pre-crisis upward trend in consumption and do not reflect price increases during the recovery period, suggest that alcohol is a potential pathway by which recessions improve health and/or reduce mortality. Copyright © 2015 Elsevier B.V. All rights reserved.

Baby Booming Inequality? Demographic Change and Inequality in Norway, 1967{2004.

OpenAIRE

Almås, Ingvild; Havnes, Tarjei; Mogstad, Magne

2011-01-01

We demonstrate how age-adjusted inequality measures can be used to evaluate whether changes in inequality over time are because of changes in the age structure. In particular, we explore the hypothesis that the substantial rise in earnings inequality since the early 1980s is driven by the large baby boom cohorts approaching the peak of the age-earnings profile. Using administrative data on earnings for every Norwegian male over the period 1967-2004, we find that the impact of age ...

A comparative study on the decomposition of edible and non-edible oil cakes in the Gangetic alluvial soil of West Bengal.

Science.gov (United States)

Mondal, Sudeshna; Das, Ritwika; Das, Amal Chandra

2014-08-01

An experiment has been conducted under laboratory conditions to investigate the effect of decomposition of two edible oil cakes, viz. mustard cake (Brassica juncea L) and groundnut cake (Arachis hypogaea L), and two non-edible oil cakes, viz. mahua cake (Madhuca indica Gmel) and neem cake (Azadirachta indica Juss), at the rate of 5.0 t ha(-1) on the changes of microbial growth and activities in relation to transformations and availability of some plant nutrients in the Gangetic alluvial (Typic Haplustept) soil of West Bengal, India. Incorporation of oil cakes, in general, highly induced the proliferation of total bacteria, actinomycetes, and fungi, resulting in greater retention and availability of oxidizable C, N, and P in soil. As compared to untreated control, the highest stimulation of total bacteria and actinomycetes was recorded with mustard cake (111.9 and 84.3 %, respectively) followed by groundnut cake (50.5 and 52.4 %, respectively), while the fungal colonies were highly accentuated due to the incorporation of neem cake (102.8 %) in soil. The retention of oxidizable organic C was highly increased due to decomposition of non-edible oil cakes, more so under mahua cake (14.5 %), whereas edible oil cakes and groundnut cake in particular exerted maximum stimulation (16.7 %) towards the retention of total N in soil. A similar trend was recorded towards the accumulation of available mineral N in soil and this was more pronounced with mustard cake (45.6 %) for exchangeable NH4 (+) and with groundnut cake (63.9 %) for soluble NO3 (-). The highest retention of total P (46.9 %) was manifested by the soil when it was incorporated with neem cake followed by the edible oil cakes; while the available P was highly induced due to the addition of edible oil cakes, the highest being under groundnut cake (23.5 %) followed by mustard cake (19.6 %).

Applicability of Vegetable Oils as a Wood Preservative

Directory of Open Access Journals (Sweden)

Eylem Dizman Tomak

2012-04-01

Full Text Available Conventional heavy duty wood preservatives have been banned or restricted for some applications due to their mammalian toxicity and their adverse effect on the environment. New, eco-friendly, but nevertheless still effective protection systems, is needed to protect wood in outdoors. Non-toxic vegetable oils can form of a protective layer on the surface of the wood cells which decrease water uptake of wood. For that reason, oils have a good potential as being a wood preservative. However, impregnation with vegetable oils is insufficient to impart adequate biological decay and termite resistance, and indeed the treatment may increase wood’s propensity to burn. In addition, a high level of oil absorption required for good protection make the process impractical and uneconomic to use. The efficiency of the treatment can be improved with using the biocides and oils together. Beside this, usage of modified oils can decrease the retention levels in wood. In this study, applicability of vegetable oils being one of the environment-friendly, biodegradable water repellents on wood treatments was reported. Furthermore, problems related to the use of oils for wood protection, and possible solutions for the problems were discussed.In this study, applicability of vegetable oils as one of the environment-friendly, biodegradable water repellents was reported. Furthermore, problems related to the use of oils for wood protection and possible solutions for the problems were discussed

Retention and distribution of polyphenols after pan-frying of French fries in oils enriched with olive leaf extract.

Science.gov (United States)

Chiou, A; Salta, F N; Kalogeropoulos, N; Mylona, A; Ntalla, I; Andrikopoulos, N K

2007-10-01

Palm oil, olive oil, and sunflower oil were supplemented with an extract rich in polyphenols obtained from olive tree (Olea europaea) leaves at levels of 120 and 240 mg total polyphenols per kilogram of oil. Pan-frying of potatoes was performed in both the enriched and the nonsupplemented oils under domestic frying conditions. Total polyphenol content was estimated by the Folin-Ciocalteau assay, oleuropein was determined by HPLC analysis, while other individual polyphenols by GC/MS analysis. Fourteen polyphenol species were identified in the olive leaf extract, among which oleuropein predominated (1.25 g/kg olive leaves). All the enriched oils contained oleuropein before and after frying. Oleuropein as well as other polyphenol species were detected in all French fries cooked in enriched oils. Polyphenol intake by consuming French fries pan-fried in the enriched oils was calculated to be 6 to 31 times higher than that in the case of French fries fried in commercial oils, being dependent on the frying oil type.

Desolventizing of soybean oil/azeotrope mixtures using ceramic membranes.

Science.gov (United States)

de Melo, Jonas R M; Tiggeman, Lidia; Rezzadori, Katia; Steffens, Juliana; Palliga, Marshall; Oliveira, J Vladimir; Di Luccio, Marco; Tres, Marcus V

2017-08-01

This work investigates the use of ceramic membranes with different molecular weight cut-offs (MWCOs: 5, 10 and 20 kDa) to desolventize azeotropic solvent mixtures (ethanol/n-hexane and isopropyl alcohol/n-hexane) from soybean oil/azeotrope micelles. Results show that a decrease in the MWCO of a membrane and an increase in the solvent mass ratio in the mixture resulted in a significant reduction in the permeate flux. The 20 kDa membrane presented the highest permeate flux, 80 and 60 kg/m 2 h for the soybean oil/n-hexane/isopropyl alcohol and soybean oil/n-hexane/ethanol azeotropes, respectively, for an oil to solvent ratio of 1:3 (w/w). The highest oil retention was found using the n-hexane/isopropyl alcohol azeotrope, around 25% in the membrane with the lowest MWCO, that is, 5 kDa. It is shown that the azeotropic mixtures provided intermediate characteristics compared to the original pure solvent behavior.

Geotechnical characterization of boom clay in relation to the disposal of radioactive waste

International Nuclear Information System (INIS)

Horseman, S.T.; Winter, M.G.; Enwistle, D.C.

1987-01-01

This report describes the results of a laboratory study on the geotechnical properties of the Tertiary Boom clay. Tests were performed on 'undisturbed' samples of clay taken from a location 247 m below surface at the SCK/CEN experimental site at Mol in Belgium. In geotechnical terms, the Boom clay (at depth) may be described as a hard, high-plasticity, overconsolidated clay. Test methods have included (a) the one-dimensional consolidation test with consolidation stresses up to 32 MPa, (b) the one dimensional swelling pressure test, (c) the isotropically-consolidated, undrained (CIU) triaxial test with pore pressure measurement, and (d) the unconsolidated undrained (UU) triaxial test. All triaxial tests were load-controlled. Limited test results are presented on pore pressure responses during heating under undrained conditions and on the effect of elevated temperature (80 O C) on deformability and strength. It is found that significantly large excess pore pressures (circa 1 MPa under in situ stress conditions) may be developed during heating from ambient laboratory temperature to 80 O C. The effect is due, at least in part, to the expansion of the pore fluid

Growing pains : how drug testing keeps workers and assets safe in a booming oil patch

Energy Technology Data Exchange (ETDEWEB)

Paulgaard, T.S.

2006-06-15

Drug abuse has become a subject of concern to the oil and gas industry, where mistakes in the operation of large machines can result in injury, death and the loss of millions of dollars. Pre-employment urine tests are becoming standard procedure in the oil field. Many supervisors refuse to let employees start work without a clear test. Urine samples are tested for the presence of cannabis, cocaine, opiates, amphetamines and phencyclidine. When a worker is injured or killed on the job, or after an uncommon error that causes significant damage, all parties involved are tested as soon as possible and a receipt of the results are expedited. The Alberta Human Rights and Citizenship Commission is now addressing the issue of drug testing, and has ascertained that drug and alcohol testing are only allowable in certain circumstances, and that it is discriminatory to test potential or existing employees for drug and alcohol use if the testing is not reasonable or justifiable. They have also suggested that there is a duty to accommodate persons with disabilities in the workplace. Drug and alcohol dependency fall within the meaning of disabled. Under the Construction Owner's Association of Alberta's Canadian Model for a Safe Workplace, testing must work in concert with treatment. Current employees are directed to seek help via an employee assistant plan. Workers and supervisors report that drug use is rampant in work camps. Industry-wide, fail rates for those who take part in drug testing are quoted by experts as ranging from between 2 to 14 per cent. 2 figs.

Growing pains : how drug testing keeps workers and assets safe in a booming oil patch

Energy Technology Data Exchange (ETDEWEB)

Paulgaard, T S

2006-06-15

Drug abuse has become a subject of concern to the oil and gas industry, where mistakes in the operation of large machines can result in injury, death and the loss of millions of dollars. Pre-employment urine tests are becoming standard procedure in the oil field. Many supervisors refuse to let employees start work without a clear test. Urine samples are tested for the presence of cannabis, cocaine, opiates, amphetamines and phencyclidine. When a worker is injured or killed on the job, or after an uncommon error that causes significant damage, all parties involved are tested as soon as possible and a receipt of the results are expedited. The Alberta Human Rights and Citizenship Commission is now addressing the issue of drug testing, and has ascertained that drug and alcohol testing are only allowable in certain circumstances, and that it is discriminatory to test potential or existing employees for drug and alcohol use if the testing is not reasonable or justifiable. They have also suggested that there is a duty to accommodate persons with disabilities in the workplace. Drug and alcohol dependency fall within the meaning of disabled. Under the Construction Owner's Association of Alberta's Canadian Model for a Safe Workplace, testing must work in concert with treatment. Current employees are directed to seek help via an employee assistant plan. Workers and supervisors report that drug use is rampant in work camps. Industry-wide, fail rates for those who take part in drug testing are quoted by experts as ranging from between 2 to 14 per cent. 2 figs.

The design and testing of a memory metal actuated boom release mechanism

Science.gov (United States)

Powley, D. G.; Brook, G. B.

1979-01-01

A boom latch and release mechanism was designed, manufactured and tested, based on a specification for the ISEE-B satellite mechanism. From experimental results obtained, it is possible to calculate the energy available and the operating torques which can be achieved from a torsional shape memory element in terms of the reversible strain induced by prior working. Some guidelines to be followed when designing mechanisms actuated by shape memory elements are included.

Energy Saving Potential in Knuckle Boom Cranes using a Novel Pump Controlled Cylinder Drive

Directory of Open Access Journals (Sweden)

Søren Ketelsen

2018-04-01

Full Text Available This paper is considering the application of a novel pump controlled cylinder drive, the so-called Speed-variable Switched Differential Pump (SvSDP, for knuckle boom crane actuation. Especially the control system for the SvSDP drive is considered, and aiming on improving energy efficiency a refinement of the existing control structure is proposed. An energy efficient sizing algorithm for the SvSDP drive is developed, and fundamental differences between the achievable operating range for the SvSDP drive compared to a conventional valve-cylinder drive are discussed. A case study is conducted with knuckle boom crane actuation, and compared to a conventional valve actuation. Simulation results show that the motion tracking performance is on a similar level compared to the valve actuation approach, while the energy consumption is drastically decreased. For the given test trajectory the valve actuation system consumes 0.79 kWh of electrical energy, while the SvSDP drive consume 0.06 kWh, if ideal energy recovery and storage is assumed.

Reactive transport modelling of a heating and radiation experiment in the Boom clay (Belgium)

International Nuclear Information System (INIS)

Montenegro, L.; Samper, J.; Delgado, J.

2003-01-01

Most countries around the world consider Deep Geological Repositories (DGR) as the most safe option for the final disposal of high level radioactive waste (HLW). DGR is based on adopting a system of multiple barriers between the HLW and the biosphere. Underground laboratories provide information about the behaviour of these barriers at real conditions. Here we present a reactive transport model for the CERBERUS experiment performed at the HADES underground laboratory at Mol (Belgium) in order to characterize the thermal (T), hydrodynamic (H) and geochemical (G) behaviour of the Boon clay. This experiment is unique because it addresses the combined effect of heat and radiation produced by the storage of HLW in a DGR. Reactive transport models which are solved with CORE, are used to perform quantitative predictions of Boom clay thermo-hydro-geochemical (THG) behaviour. Numerical results indicate that heat and radiation cause a slight oxidation near of the radioactive source, pyrite dissolution, a pH decrease and slight changes in the pore water chemical composition of the Boom clay. (Author) 33 refs

New techniques on oil spill modelling applied in the Eastern Mediterranean sea

Science.gov (United States)

Zodiatis, George; Kokinou, Eleni; Alves, Tiago; Lardner, Robin

2016-04-01

Small or large oil spills resulting from accidents on oil and gas platforms or due to the maritime traffic comprise a major environmental threat for all marine and coastal systems, and they are responsible for huge economic losses concerning the human infrastructures and the tourism. This work aims at presenting the integration of oil-spill model, bathymetric, meteorological, oceanographic, geomorphological and geological data to assess the impact of oil spills in maritime regions such as bays, as well as in the open sea, carried out in the Eastern Mediterranean Sea within the frame of NEREIDs, MEDESS-4MS and RAOP-Med EU projects. The MEDSLIK oil spill predictions are successfully combined with bathymetric analyses, the shoreline susceptibility and hazard mapping to predict the oil slick trajectories and the extend of the coastal areas affected. Based on MEDSLIK results, oil spill spreading and dispersion scenarios are produced both for non-mitigated and mitigated oil spills. MEDSLIK model considers three response combating methods of floating oil spills: a) mechanical recovery using skimmers or similar mechanisms; b) destruction by fire, c) use of dispersants or other bio-chemical means and deployment of booms. Shoreline susceptibility map can be compiled for the study areas based on the Environmental Susceptibility Index. The ESI classification considers a range of values between 1 and 9, with level 1 (ESI 1) representing areas of low susceptibility, impermeable to oil spilt during accidents, such as linear shorelines with rocky cliffs. In contrast, ESI 9 shores are highly vulnerable, and often coincide with natural reserves and special protected areas. Additionally, hazard maps of the maritime and coastal areas, possibly exposed to the danger on an oil spill, evaluate and categorize the hazard in levels from low to very high. This is important because a) Prior to an oil spill accident, hazard and shoreline susceptibility maps are made available to design

Effects of Added Lipids on Digestibility and Nitrogen Balance in Oiled Common Murres ( Uria aalge ) and Western Grebes ( Aechmophorus occidentalis ) Fed Four Formulations of a Critical Care Diet.

Science.gov (United States)

Duerr, Rebecca S; Klasing, Kirk C

2017-06-01

Nutritional support is a primary therapy administered to oiled animals during responses to oil spills, but data informing nutritional decision-making during events are limited. In this study, 44 common murres ( Uria aalge ) and 6 Western grebes ( Aechmophorus occidentalis ), naturally oiled by oceanic seeps off the coast of Ventura and Santa Barbara Counties, CA, USA, were assigned to 1 of 4 groups fed diets with varying levels (6.8% [no added oil], 11%, and 20%) and types (salmon, corn) of oil added to a partially purified basal diet. Birds used in the study ranged from extremely emaciated to thin body condition (62%-80% wild bird mean body mass). Acid-insoluble ash was used as an indigestible dietary marker to quantify nitrogen retention, apparent nitrogen digestibility, nitrogen-corrected apparent metabolizable energy, energy digestibility, fat retention, fat digestibility, and estimated fat excretion. Fat excretion is important in these species because once birds have been cleaned they are at risk of plumage recontamination from excreted fat during care. Lower fat diets resulted in lower fat excretion but higher nitrogen retention, higher apparent nitrogen digestibility, and higher apparent metabolizable energy. Decreases in nitrogen retention were significantly related to increases in fat excretion. Regardless of diet, energy digestibility significantly declined with declines in body mass, suggesting severity of emaciation reduced a birds' ability to extract energy from food. Energy digestibility was highest in the 11% (low) salmon oil diet; hence, this diet had the highest effective energy content despite a lower gross kcal/kg diet. Diets fed during oil spills historically have had high fat concentrations to provide maximum caloric support. Results of this study suggest that lower fat diets may be more efficacious for nutritionally depleted seabirds. This study provides valuable data to guide clinical decision making regarding nutritional support during oil

Prediction of sonic boom from experimental near-field overpressure data. Volume 2: Data base construction

Science.gov (United States)

Glatt, C. R.; Reiners, S. J.; Hague, D. S.

1975-01-01

A computerized method for storing, updating and augmenting experimentally determined overpressure signatures has been developed. A data base of pressure signatures for a shuttle type vehicle has been stored. The data base has been used for the prediction of sonic boom with the program described in Volume I.

Microbial enhanced oil recovery research. Final report, Annex 5

Energy Technology Data Exchange (ETDEWEB)

Sharma, M.M.; Gerogiou, G.

1993-07-01

The objective of this project was to develop an engineering framework for the exploitation of microorganisms to enhance oil recovery. An order of magnitude analysis indicated that selective plugging and the production of biosurfactants are the two most likely mechanisms for the mobilization of oil in microbial enhanced oil recovery (MEOR). The latter, biosurfactant production, is easier to control within a reservoir environment and was investigated in some detail. An extensive literature survey indicated that the bacterium Bacillus licheniformis JF-2 produces a very effective surface active agent capable of increasing the capillary number to values sufficiently low for oil mobilization. In addition, earlier studies had shown that growth of this bacterium and biosurfactant production occur under conditions that are typically encountered in MEOR, namely temperatures up to 55{degrees}C, lack of oxygen and salinities of up to 10% w/v. The chemical structure of the surfactant, its interfacial properties and its production by fermentation were characterized in some detail. In parallel, a set of experiments as conducted to measure the transport of Bacillus licheniformis JF-2 in sandpacks. It was shown that the determining parameters for cell transport in porous media are: cell size and degree of coagulation, presence of dispersants, injection velocity and cell concentration. The mechanisms of bacteria retention within the pores of the reservoir were analyzed based on heuristic arguments. A mathematical simulator of MEOR was developed using conservation equations in which the mechanisms of bacteria retention and the growth kinetics of the cells were incorporated. The predictions of the model agreed reasonably well with experimental results.

The Canadian unemployment rate – with and without Alberta’s Boom

Directory of Open Access Journals (Sweden)

Ronald D. Kneebone

2014-11-01

Full Text Available Over the past two decades there has occurred a shift in economic power from central Canada to other parts of the country. Saskatchewan and Newfoundland and Labrador have both claimed a noticeably larger share of Canada’s GDP since 1995 but easily the largest shift of economic output has been to Alberta. This adjustment in the Canadian economy is most easily observed in the large migration between provinces of Canadians seeking employment. Data from Statistics Canada’s Labour Force Survey shows that over the period 1995-2014 Alberta has maintained an average annual rate of growth in employment of 2.50 per cent. This is well above the 1.44 percentage rate of employment growth in second-place Ontario and double the average rate of growth in neighbouring British Columbia. This begs the question: What would Canada’s unemployment rate be today if Alberta’s job creation boom hadn’t happened? Since the national jobless rate is a weighted average of the provincial figures, getting an answer is straightforward. Assume Alberta’s employment growth was no higher than Ontario’s over the same period and the impact on Canada’s unemployment rate is startling. By August 2014, Canada’s unemployment would have been 9.39 per cent — 2.23 percentage points higher than the real figure of 7.16 per cent — and the Alberta economy would have created 411,000 fewer jobs; jobs which typically pay $200 to $300 per week more than jobs in Ontario and Quebec. This gloomy scenario means that Canada’s present unemployment rate would be 2.5 percentage points higher than it was in mid-2000, and 411,000 Canadians, along with their dependents, would be clearly much worse off were it not for the boom in Alberta. Obviously this simple experiment can’t capture the situation’s full economic complexity. Would some of those jobs have cropped up in other provinces? Stubbornly lacklustre growth could very well have forced governments and the Bank of Canada to adopt

On the role of anisotropy in the perturbation of Boom Clay by a deep disposal repository for high-level wastes

International Nuclear Information System (INIS)

Sillen, X.; Li, X.L.; Van Marcke, P.; Chen, G.; Bastiaens, W.

2010-01-01

Document available in extended abstract form only. All along the characterisation programme of the Boom Clay, a potential host rock for geological disposal of long-lived, heat-emitting radioactive waste, evidences of anisotropy of key thermo-hydro-mechanical (THM) properties have been collected through direct observations and laboratory measurements. In parallel, evidences of anisotropic THM behaviour of the clay massif were obtained during excavations and in-situ experiments in the underground research laboratory HADES at Mol. Careful analysis of the observations and simple modelling reveal the key role of the anisotropy of the material properties and, to a lesser extent, the in situ stresses in the development of a damaged zone around the galleries and the hydro-mechanical perturbation in the clay massif. As a consequence of the sedimentary deposition process, clay formations often exhibit visible bedding. This is the case for Boom Clay. Like other deep clays, Boom Clay also exhibits pronounced strain anisotropy under certain hydro-mechanical loading. Isotropic compression tests performed in the early nineties have shown that, for Boom Clay at a depth of about 225 m, the increments of deformation perpendicular to the bedding planes, i.e. vertical, are about two times larger than increments of deformation parallel to the bedding planes, i.e. horizontal. Moreover, it was observed that this mechanical anisotropy decreases progressively as the isotropic stress is increased. Drained heating tests under constant isotropic loading also evidenced anisotropic behaviour during thermo-consolidation. Like the mechanical properties, hydraulic and thermal properties of the Boom Clay also show anisotropy: lab and in situ measurements suggest that the horizontal hydraulic conductivity is about twice the vertical one while the ratio between horizontal and vertical thermal conductivities is about 1.4. The anisotropic THM behaviour of the Boom Clay was evidenced during excavations

Impact of Air Oxidation on Dissolved Organic Matter from Boom Clay: Comparison Between Natural and Artificial Oxidation Series and In Situ Piezometers Water From Hades Galleries

International Nuclear Information System (INIS)

Blanchart, Pascale; Faure, Pierre; Michels, Raymond; Bruggeman, Christophe; De Craen, Mieke; Parant, Stephane

2012-01-01

Document available in extended abstract form only. The Boom Clay is considered by the Belgian radioactive waste management agency Ondraf/Niras as a possible host rock for the geological disposal of high-level and long-lived radioactive waste. The drilling of galleries and corings in the Boom Clay (Mol, Belgium) leads to perturbations of the initial physical and chemical conditions. In piezometers, the DOC may show considerable and irregular variations through time, with values ranging from 80 to 425 mg/L. The origin and bio-physico-chemical controls of such variations are yet unknown but oxidation and biodegradation were considered as most likely. Three categories of samples were collected with the aim of determining and quantifying different molecular markers representative for the oxidation process: - Fresh as well as air-oxidized Boom Clay samples were collected in the Underground Research Facility HADES of EURIDICE (Mol, Belgium): they represent a natural series of oxidation; - A fresh Boom Clay sample was submitted to laboratory air oxidation (artificial series). In these experiments, powdered clay was heated at 80 deg. C under air flow during 1, 3, 6, 9, 12, 18 months; - Four water samples were collected during January 2010 from different horizons in the Boom Clay by means of piezometers located in the Underground Research Facility. The DOM (dissolved organic matter) of Boom Clay samples (artificial and natural series) was isolated by Soxhlet using pure water as well as by leaching experiments. The quantitative analysis shows an increasing in DOC (Dissolved Organic Carbon) content with oxidation. Qualitative characterizations including spectroscopic (3D-fluorescence) as well as molecular analyses (flash pyrolysis - gas chromatography - mass spectrometry (PyGC-MS) and size exclusion chromatography (SEC-HPLC)) show an evolution of the DOM chemistry with oxidation: - An enrichment in oxygen bearing molecules (acidic poly functional groups); - A decrease in

Asia-Pacific lube oil markets

International Nuclear Information System (INIS)

Yamaguchi, N.

2001-01-01

An overview of the Asia-Pacific (AP) lubricating oils market, its special characteristics, and its role in the global economy are presented. In the 'boom and bust' years of 1997-1999, the Asia-Pacific market was even bigger then the US market. For the short-term, the scenario is surplus capacity and poor margins, but in the long term there is enormous potential for growth. How fuel demand and quality is related to engine type is discussed. The three basic grades of baseoils are described, and the Asia-Pacific lube demand and the Asia-Pacific lube oil supply are discussed. There are 15 diagrams giving data on: (i) finished lubes in world markets as a percentage of total; (ii) how lube demand follows GDP per capita in Asia; (iii) AP baseoil capacity relationships; (iv) AP baseoil disposition by end use; (v) AP changing shares of baseoil demand; (vi) AP finished lube demand by subregion; (vii) AP finished lube demand growth, indexed; (viii) AP baseoil capacity by region; Singapore baseoil vs. Dubai crude prices, 1992-99; (ix) Singapore baseoil vs. crude prices, 1992-99; (x) AP baseoil deficit moved to surplus; (xi) AP baseoil production; (xii) East Asia net percentage change in lube sales, 1997-1999. (xiii) Southeast Asia net percentage change in lube sales, 1997-1999; (xiv) South East Asia and Australia net percentage change in lube sales, 1997-1999 and (xv) Asia-Pacific major lube marketers

Studies of emissions from oil fires

International Nuclear Information System (INIS)

Fingas, M.; Lambert, L.; Wang, Z.; Li, K.; Ackerman, F.; Goldthorp, M.

2001-01-01

then developed for more than 150 specific compounds or emission categories. They can be used to calculate safe distances and levels of concern for different burn sizes that would likely be contained in a boom. It was concluded that a safe distance for a crude oil burn of about 500 square metres is 500 metres. For a diesel burn it would be much further. 13 refs., 42 tabs., 4 figs

Some aspects of floating ice related to sea surface operations in the Barents sea

International Nuclear Information System (INIS)

Loeset, S.

1993-01-01

The present work highlights some aspects of floating ice related to sea surface operations in the Barents sea. The thesis consists of eight papers which fall into two main categories; one part deals with numerical modeling of the temperature distribution and ablation of icebergs (three papers), and the other part studies the behavior of broken ice, focusing on both laboratory experiments and numerical modeling. The temperature distribution within an iceberg affects the mechanical strength of the ice and is therefore crucial in engineering applications when estimating loads from impinging icebergs on offshore structures. A numerical model which simulates the temperature distribution and ablation of icebergs has been developed. The model shows that the depth of the thermal disturbance and slope of the temperature gradient of an iceberg depend on the boundary conditions and the time at sea. By about 12 m into the ice, the temperature is virtually free of any thermal boundary influence. Oil spill response techniques are vulnerable to the presence of sea ice. Deflecting ice upstream of a spill site by means of a flexible boom will facilitate the application of conventional oil spill recovery systems such as oil skimmers and booms. Experiments with such an ice deflecting boom were conducted in an ice tank to determine the loads on the boom and to study the ice-free wake. The study indicated the technical feasibility of the ice boom concept as an operational tool for oil spill cleanups. A two-dimensional discrete element model has been developed. This model simulates the dynamics and interaction forces between distinct ice floes in a broken ice field. The numerical model was applied to estimate the loads on a boom used for ice management. 121 refs., 70 figs., 10 tabs

Chemical composition of Thymus vulgaris L. (thyme essential oil from the Rio de Janeiro State (Brazil

Directory of Open Access Journals (Sweden)

ALEXANDRE PORTE

2008-03-01

Full Text Available The essential oil from fresh leaves of Thymus vulgaris L. from Rio de Janeiro State, Brazil, was isolated by hydrodistillation and analyzed through a combination of GC and GC/MS. Compounds representing 95.1 % of the oil were identified. Thirty-nine constituents were detected, of which twenty-eight were identified according to their chromatographic retention indices and mass spectra. The major constituents of the oil were thymol (44.7 %, p-cymene (18.6 % and g-terpinene (16.5 %.

Low-Speed Control of Heavy-Load Transfer Robot with Long Telescopic Boom Based on Stribeck Friction Model

Directory of Open Access Journals (Sweden)

Bo You

2012-01-01

Full Text Available The severe low-speed creep phenomenon occurs in the telescopic boom system of a heavy-load transfer robot with a long telescopic boom as a result of nonlinear friction. In order to improve control precision and operation performance at low speeds, we built a three-loop control nonlinear model of an AC servo motor with Stribeck friction disturbance. Traditional proportional-integral-derivative controller (PID and fuzzy PID controls were, respectively, adopted in the position loop, and the control performance was simulated. The results showed that a system with fuzzy PID control eliminates “flat top” position tracking and “dead zone” speed tracking, which are generated by traditional PID, and thereby decreases the effect of friction on the performance of the servo system. This elimination also improved the tracking accuracy and robustness of the system.

Popular Demobilization, Agribusiness Mobilization, and the Agrarian Boom in Post-Neoliberal Argentina

Directory of Open Access Journals (Sweden)

Pablo Lapegna

2015-08-01

Full Text Available Based on ethnographic research, archival data, and a catalog of protest events, this article analyzes the relationship between popular social movements, business mobilization, and institutional politics in Argentina during the post-neoliberal phase, which arguably began circa 2003. How did waves of popular mobilization in the 1990s shape business mobilization in the 2000s? How did contentious politics influence institutional politics in the post-neoliberal period? What are the changes and continuities of the agrarian boom that cut across the neoliberal and post-neoliberal periods? While I zoom in on Argentina, the article goes beyond this case by contributing to three discussions. First, rather than limiting the analysis to the customary focus on the mobilization of subordinated actors, it examines the demobilization of popular social movements, the mobilization of business sectors, and the connections between the two. Second, it shows the ways in which the state can simultaneously challenge neoliberal principles while also favoring the global corporations that dominate the contemporary neoliberal food regime. Finally, the case of Argentina sheds light on the political economy of the "Left turn" in Latin America, particularly the negative socio-environmental impacts of commodity booms. The article concludes that researchers need to pay closer attention to the connections between contentious and institutional politics, and to the protean possibilities of neoliberalism to inspire collective actions.

Use of biomass sorbents for oil removal from gas station runoff.

Science.gov (United States)

Khan, Eakalak; Virojnagud, Wanpen; Ratpukdi, Thunyalux

2004-11-01

The use of biomass sorbents, which are less expensive and more biodegradable than synthetic sorbents, for oil removal from gas station runoff was investigated. A bench-scale flume experiment was conducted to evaluate the oil removal and retention capabilities of the biomass sorbents which included kapok fiber, cattail fiber, Salvinia sp., wood chip, rice husk, coconut husk, and bagasse. Polyester fiber, a commercial synthetic sorbent, was also experimented for comparison purpose. Oil sorption and desorption tests were performed at a water flow rate of 20 lmin-1. In the oil sorption tests, a 50 mgl(-1) of used engine oil-water mixture was synthesized to simulate the gas station runoff. The mass of oil sorbed for all sorbents, except coconut husk and bagasse, was greater than 70%. Cattail fiber and polyester fiber were the sorbents that provided the least average effluent oil concentrations. Oil selectivity (hydrophobic properties) and physical characteristics of the sorbents are the two main factors that influence the oil sorption capability. The used sorbents from the sorption tests were employed in the desorption tests. Results indicated that oil leached out of all the sorbents tested. Polyester fiber released the highest amount of oil, approximately 4% (mass basis) of the oil sorbed. copyright 2004 Elsevier Ltd.

Comparison of Separation of Seed Oil Triglycerides Containing Isomeric Conjugated Octadecatrienoic Acid Moieties by Reversed-Phase HPLC

Directory of Open Access Journals (Sweden)

Anh Van Nguyen

2017-12-01

Full Text Available Relative retention analysis and increment approach were applied for the comparison of triglycerides (TGs retention of a broad set of plant seed oils with isomeric conjugated octadecatrienoic acids (CLnA by reversed-phase HPLC for “propanol-2-acetonitrile” mobile phases and Kromasil 100-5C18 stationary phase with diode array detection (DAD and mass spectrometric (MS detection. The subjects of investigation were TGs of seed oils: Calendula officinalis, Catalpa ovata, Jacaranda mimosifolia, Centranthus ruber, Momordica charantia, Trichosanthes anguina, Punica granatum, Thladiantha dubia, Valeriana officinalis, and Vernicia montana. It was found that a sequence of elution of TGs of the same types is the same without any inversions for full range of mobile phase compositions: punicic (C18:39Z11E13Z < jacaric (C18:38Z10E12Z < catalpic (C18:39E11E13Z < α-eleostearic (C18:39Z11E13E < calendic (C18:38E10E12Z < β-eleostearic (C18:39E11E13E < all-E calendic (C18:38E10E12E acids. TGs and fatty acid compositions were calculated for all oil samples. Regularities of solute retentions as a function of isomeric conjugated octadecatrienoic acid moiety structure are discussed. Thus, it was proven that it is possible to differentiate TGs of complex composition with moieties of all natural CLnA by retention control accomplished by electronic spectra comparison, even though there are only three types of electronic-vibration spectra for seven isomeric CLnA.

Water-in-oil emulsions results of formation studies and applicability to oil spill modelling

International Nuclear Information System (INIS)

Fingas, Merv; Fieldhouse, Ben; Mullin, Joe

1999-01-01

This paper summarises studies of water-in-oil emulsions, their stability, and modelling of their formation. Studies show that water-in-oil emulsions might be characterised into three categories (stable, mesostable and unstable). These categories were established by visual appearance, elasticity and viscosity difference. It was also shown that water content was not an important factor. A fourth category of water-in-oil exists, that of water entrainment, which is not an emulsion. Water-in-oil emulsions made from crude oils have different classes of stabilities as a result of the asphaltene and resin contents. The differences in the emulsion types are readily distinguished both by their rheological properties, and simply by appearance. The apparent viscosity of a stable emulsion at a shear rate of one reciprocal second, is at least three orders-of-magnitude greater than the starting oil. An unstable emulsion usually has a viscosity no more than one order-of-magnitude greater than that of the starting oil. A stable emulsion has a significant elasticity, whereas an unstable emulsion does not. Stable emulsions have sufficient asphaltenes (>∼7%) to establish films of these compounds around water droplets. Mesostable emulsions have insufficient asphaltenes to render them completely stable. Stability is achieved by visco-elastic retention of water and secondarily by the presence of asphaltene or resin films. Mesostable emulsions display apparent viscosities of about 80-600 times that of the starting oil and true viscosities of 20-200 times that of the starting oil. Mesostable emulsions have an asphaltene and resin content greater than 3%. Entrained water occurs when a viscous oil retains larger water droplets, but conditions are not suitable for the formation of an emulsion. Entrained water may have a viscosity that is similar or slightly greater (∼ 2-10 times) than the starting oil. It was found that emulsion formation occurs at a threshold energy, however this energy

From creekology to geology: Finding and conserving oil on the Southern Plains, 1859--1930

Science.gov (United States)

Frehner, Brian

This dissertation tells the story of the oil industry's westward migration from Pennsylvania to the Southern Plains states of Kansas, Oklahoma, and Texas and how different environments in these regions influenced prospectors' methods for finding oil. Petroleum engineers, geologists, and businessmen take center stage throughout the narrative, and I emphasize how their biases, values, and interests influenced the kind of knowledge produced. At the heart of this story lay a contest between professional, university-trained engineers and geologists and so-called practical oil men, or "wildcatters," who received their training less formally from surveying the landscape. Although both groups performed field work in their search for oil, I explore how each learned very different information from that activity. Wildcatters met with so much success that the oil industry failed to take geologists seriously for approximately fifty years after 1860 when the Pennsylvania oil boom started, and I argue that the environment played an important role in this contest for authority between oil prospectors who learned their trade through hands-on experience and those who learned it primarily in the classroom. I continue this theme by showing how the environment actively influenced the growing acceptance of geologists as the oil industry migrated west and companies with interests in Kansas, Oklahoma, and Texas began hiring geologists and establishing their own geological research departments. A pioneer in the use of geology, Henry L. Doherty, controlled Cities Service holding company and dispatched an army of geologists who discovered significant oil strikes in these states. Doherty's embrace of university-trained experts led him to advocate conservation of oil on the basis of geological and engineering principles. Practical men in Oklahoma, however, recognized the need for conservation even earlier and succeeded in lobbying their state legislature for laws which proved effective long

Uplifting : mobile cranes and picker trucks get higher, stronger, and safer

Energy Technology Data Exchange (ETDEWEB)

Budd, G.

2008-10-15

New crane and picker truck equipment designed for use in the oil and gas industry was discussed in this article. The longest crane in the North America is due to arrive in Calgary soon. Mobile cranes are often used for maintenance, construction, and shutdowns at natural gas plants, refineries, and oil batteries. Telescopic cranes are also used to service pump jacks and lift rolls of coiled tubing into place on drilling rigs. While cranes carry more weight, picker trucks are more mobile and flexible. Lattice boom crawler cranes were designed to pick up loads and carry them to different positions. Telescopic cranes must remain stationary, and careful planning is needed to ensure that they are used efficiently. Modern telescopic cranes have hydraulically powered booms. Advanced steel alloy technology is used to produce lightweight booms equipped with automated pin-locking mechanisms. The largest telescopic crane in North America will be used by an oil and gas operator in Alberta. The crane will have a combined boom and lattice jib height of 226 meters, and its maximum lifting capacity is 1200 tonnes. Gantry cranes are also increasingly being used by oil and gas operators due to their ability to straddle loads, thereby reducing the risk of tipping. It was concluded that gantry cranes are particularly suitable for rougher terrains. 4 figs.

Stormwater quality performance of a macro-pervious pavement car park installation equipped with channel drain based oil and silt retention devices.

Science.gov (United States)

Newman, Alan Paul; Aitken, Douglas; Antizar-Ladislao, Blanca

2013-12-15

This paper reports the results of a two year field monitoring exercise intended to investigate the pollution abatement capabilities of a novel system which offers an alternative to the, now well established, pervious pavement system as a source control device for stormwater management. The aim of this study was to determine the effectiveness of a live installation of a macro-pervious pavement system (MPPS) (operated as a visitors' car park at a prison in Central Scotland) in retaining and treating a range of pollutants which originate from automobile use or become concentrated on the parking surface from the wider environment. The MPPS is a sub-class of pervious pavement system where the vast majority of the surface is impermeable. It directs stormwater into a pervious sub surface storage/attenuation zone through a series of distinct infiltration points fast enough to prevent flooding during the design storm. In the particular system studied here the infiltration points consist of a network of oil/silt separation devices with extensive further pollutant retention/degradation provided during the passage of stormwater through the sub surface zone. Approximately 12 months after the car park was completed a sampling regime was instigated in which grab samples were collected at intervals from each of the three sub catchments whilst, simultaneously, samples were collected directly from the, pollutant retaining, infiltration devices. Through investigation of samples collected at the upstream end of the system, the retention of significant amounts of hydrocarbons and heavy metals in the initial collection devices has been illustrated and the analysis of effluent samples collected at the outlet points indicate that the system is capable of producing effluent which is of a standard comparable to that expected from a traditional pervious pavement system and is acceptable for direct release into a surface water receptor. The system offers the opportunity to accrue the benefits

Polymer as permeability modifier in porous media for enhanced oil recovery

Science.gov (United States)

Parsa, Shima; Weitz, David

2017-11-01

We use confocal microscopy to directly visualize the changes in morphology and mobilization of trapped oil ganglia within a 3D micromodel of porous media upon polymer flooding. Enhanced oil recovery is achieved in polymer flooding with large molecular weight at concentrations close or higher than a critical concentration of polymer. We also measure the fluctuations of the velocity of the displacing fluid and show that the velocities change upon polymer flooding in the whole medium. The changes in the fluid velocities are heterogeneous and vary in different pores, hence only providing enough pressure gradient across a few of the trapped oil ganglia and mobilize them. Our measurements show that polymer flooding is an effective method for enhancing oil recovery due to retention of polymer on the solid surfaces and changing the resistances of the available paths to water.

Boom times : Canada's crude petroleum industry : analysis in brief

International Nuclear Information System (INIS)

Rowat, M.R.

2006-01-01

This document examined the trends in crude oil prices, the production and exports of Canada's crude petroleum industry, and Canada's imports of crude petroleum. As an exporter and importer of crude oil, Canada's petroleum industry is currently experiencing economic prosperity as a result of high oil prices combined with high global demand for oil. This document reviewed industry activity for 2005 and addressed the reasons for the first decline in Canadian crude oil production in 6 years. A quick review of soaring crude oil prices, supply and shortages was also presented. A review of exports revealed that since 1995, the United States has received 99 per cent of Canadian exports. Although production activity is occurring in 7 provinces, the biggest participant is Alberta, followed by Saskatchewan. In 2005, Canada produced 136.4 million cubic metres of crude petroleum, of which two-thirds came from Alberta. Saskatchewan contributed 18 per cent of total Canadian crude oil production, while offshore oil rigs in Newfoundland and Labrador contributed 13 per cent. The vast oil sands resource accounted for 42 per cent of the province's total production. Alberta oil export is piped entirely into the United States. In 2005, even with a slight drop in exports, Canadian oil exporters received $30 billion for their products, up from $25 billion the year before. Canada also supplied nearly 10 per cent of the American crude oil needs. According to the National Energy Board, Canadian refineries are approaching capacity. Canada's 19 refineries, which have a capacity of 320,000 cubic metres per day, operated at 92 per cent of capacity in 2005 to meet the needs of the domestic market. More imported petroleum was refined than Canadian sourced petroleum. In 2005, the gas and oil industry saw historically high profits, taxes paid and investments. 6 refs., 5 figs

Forensic fingerprinting and source identification of the 2009 Sarnia (Ontario) oil spill.

Science.gov (United States)

Wang, Zhendi; Yang, C; Yang, Z; Sun, J; Hollebone, B; Brown, C; Landriault, M

2011-11-01

This paper presents a case study in which integrated forensic oil fingerprinting and data interpretation techniques were used to characterize the chemical compositions and determine the source of the 2009 Sarnia (Ontario) oil spill incident. The diagnostic fingerprinting techniques include determination of hydrocarbon groups and semi-quantitative product-type screening via gas chromatography (GC), analysis of oil-characteristic biomarkers and the extended suite of parent and alkylated PAH (polycyclic aromatic hydrocarbon) homologous series via gas chromatography-mass spectrometry (GC-MS), determination and comparison of a variety of diagnostic ratios of "source-specific marker" compounds, and determination of the weathering degree of the spilled oil, and whether the spilled oil hydrocarbons have been mixed with any other "background" chemicals (biogenic and/or pyrogenic hydrocarbons). The detailed chemical fingerprinting data and results reveal the following: (1) all four samples are mixtures of diesel and lubricating oil with varying percentages of diesel to lube oil. Both samples 1460 and 1462 are majority diesel-range oil mixed with a smaller portion of lube oil. Sample 1461 contains slightly less diesel-range oil. Sample 1463 is majority lubricating-range oil. (2) The diesel in the four diesel/lube oil mixture samples was most likely the same diesel and from the same source. (3) The spill sample 1460 and the suspected-source sample 1462 have nearly identical concentrations and distribution patterns of target analytes including TPHs, n-alkane, PAHs and biomarker compounds; and have nearly identical diagnostic ratios of target compounds as well. Furthermore, a perfect "positive match" correlation line (with all normalized ratio data points falling into the straight correlation line) is clearly demonstrated. It is concluded that the spill oil water sample 1460 (#1, from the water around the vessel enclosed by a boom) matches with the suspected source sample 1462

Stability of vitamin D3 and vitamin D2 in oil, fish and mushrooms after household cooking

DEFF Research Database (Denmark)

Ložnjak, Petra; Jakobsen, Jette

2018-01-01

Information on the retention of vitamin D in food following household cooking is scarce. So far the retention of its metabolites vitamin D3, vitamin D2, and 25-hydroxyvitamin D3 has shown that the type of food and the cooking method are the essential determinants, and there is no significant...... difference between the metabolites. We investigated the retention of vitamin D3 and vitamin D2 in sunflower oil, vitamin D3 in rainbow trout, and vitamin D2 in button mushrooms. The investigated cooking methods were boiling at different pH, steam cooking, microwave cooking, pan-frying, and oven baking...

Chemical Modification of Waste Cotton Linters for Oil Spill Cleanup Application

Science.gov (United States)

Chattopadhyay, Debapriya; Umrigar, Keval

2017-12-01

The possibility of use of waste cotton linters as oil sorbents by chemical modification such as acetylation and cyanoethylation was studied. The acetylation process was carried out in presence of acetic anhydride using either H2SO4 or HClO4 as catalyst. The acetylation treatment time was 30, 60 and 120 min and treatment temperature was room temperature, 50 and 70 °C. For cyanoethylation, the waste cotton linters were pre-treated with 2, 5 and 10% NaOH. The treatment temperature for cyanoethylation was room temperature, 50 and 70 °C and treatment time was 30, 60 and 120 min. Both the chemical modification processes were optimized on the basis of oil absorption capacity of the chemically modified cotton fibre with the help of MATLAB software. The modified samples were tested for its oleophilicity in terms of oil absorption capacity, oil retention capacity, oil recovery capacity, reusability of sample and water uptake and buoyancy as oil sorbent. Chemically modified fibres were characterized by Fourier transform infra red spectrophotometer, scanning electron microscope and degree of substitutions.

Mindfulness as a booming, diverse and (non) religious phenomenon

DEFF Research Database (Denmark)

Borup, Jørn

2016-01-01

Mindfulness has become a phenomenon with widespread appeal in many Western countries. Like yoga, it has an Eastern religious origin, but through a long history it has been transformed and adapted to new cultural and social contexts. While the majority of research on mindfulness has been conducted...... within the health sciences, the aim of this article is to investigate the distribution, meaning and function of this practice through quantitative mapping and qualitative interviews with 16 mindfulness providers in the city of Aarhus in Denmark. The analysis reveals not just a booming phenomenon......, but also a field characterized by diversity in terms of authority claims, motivations and uses. The discussion focuses on whether mindfulness can be seen as a religious practice or as a typical expression of an individualized and secularized technique....

Report on the explosion, fire, and oil spill resulting in one fatality and injury on September 21, 1978, at Well 6 of Cavern 6 at the West Hackberry, Louisiana, oil storage site of the strategic petroleum reserve. Volume I

Energy Technology Data Exchange (ETDEWEB)

1978-11-01

The following report is the independent product of the Accident Investigation Committee which was commissioned by the Department of Energy following the accident on September 21, 1978, at the Strategic Petroleum Reserve site at West Hackberry, Louisiana. This Committee is charged with the task of determining the nature, extent, and causes of that accident, which resulted in loss of life, injury and property damage, and the need for corrective action. A nonburning oil spill went into nearby Black Lake, but was contained by the deployment of a series of oil spill containment booms and a prevailing wind from the northeast that kept the oil spill in a restricted area near shore. Because of the rapid and effective containment and cleanup of the oil spill by the Rapid Response Team, it appears very likely at this time that Black Lake will not sustain any permanent environmental damage. Cavern 6 initially contained approximately 7,000,000 barrels of oil at a pressure of 650 psig measured at the well head. As of September 29, 1978, the Strategic Petroleum Reserve Office - New Orleans (SPRO) estimated that oil expulsion from Cavern 6 was 67,510 barrels. Of this, 34,620 barrels of oil are accounted for, including 31,200 barrels of oil released into Black Lake and subsequently recovered. The remainder (32,890 barrels) was assumed by SPRO to have been burned. The total loss is presently estimated by the Accident Investigation Committee 's consultant to be $12 million. An assessment of the technical problems present at the time of the accident is given. Recommendations for improved safety procedures are included.

Untamed Jianghu or Emerging Profession: Diagnosing the Psycho-Boom amid China's Mental Health Legislation.

Science.gov (United States)

Huang, Hsuan-Ying

2017-09-25

This article focuses on the psychotherapy debate in China that was triggered by the country's mental health legislation. Seeing the release of the draft Mental Health Law in 2011 as a "diagnostic event" (Moore in Am Ethnol 14(4):727-736, 1987), I examine the debate in order to unravel the underlying logic and ongoing dynamics of the psycho-boom that has become a conspicuous trend in urban China since the early 2000s. Drawing on my fieldwork in Beijing and Shanghai, I use the two keywords of the debate-"jianghu" (literally "rivers and lakes"), an indigenous term that evokes an untamed realm, and "profession," a foreign concept whose translation requires re-translation-to organize my delineation of its contours. I describe how anticipation of state regulation prompted fears and discontents as well as critical reflections and actions that aimed to transform the field into a profession. The efforts to mark out a professional core against the backdrop of unruly jianghu further faced the challenge of an alternative vision that saw popularization as an equally noble cause. The Mental Health Law came into effect in 2013; ultimately, however, it did not introduce substantive regulation. Finally, I discuss the implications of this debate and the prospects of the psycho-boom.

A consistent phenomenological model for natural organic matter linked migration of Cm(III), Pu(III/IV), Np(IV), Tc(IV) and Pa(V) in the Boom Clay

International Nuclear Information System (INIS)

Martens, E.; Maes, N.; Bruggeman, C.; Van Gompel, M.

2010-01-01

of magnitude lower than for the first cell. This indicates that the species that is transported is not a conservative tracer as otherwise the outlet concentration should equal the inlet concentration. Recently, Bruggeman and Maes (2009) put forward a phenomenological model which describes the Tc retention and transport mechanisms in Boom Clay. They hypothesise that Tc is transported as a Tc-NOM colloidal species exhibiting slow dissociation kinetics. This phenomenological model was now tested to describe the NOM related transport of Cm, Pu, Np, Tc and Pa in these 'sequential' migration experiments. All these RNs are known to form strong complexes with NOM in batch experiments. To describe the RN elution profiles from the second clay core, we used the migration parameters (diffusion coefficient, porosity and retardation factor) of NOM derived from small-scale lab experiments and validated by large-scale (long-term) in-situ tests in combination with a first order kinetic dissociation reaction. The transport feature of the geochemical code PHREEQC-2 was used for the simulations. Based on the original NOM transport parameters, and a narrow range for the parameter in the kinetic dissociation equation (2.4-8.5 x 10 -8 s -1 ), a good match with the experimental data could be achieved for all RNs considered in this study. This supports our hypothesis that for a large array of RNs (Tc, Pa, Np, Pu and Cm in this study), the transport behaviour observed in the experiments is indeed linked to NOM, irrespective of their dominant valence state (tri-, tetra-, pentavalent). Their overall transport potential (at longer times and distances) remains limited due to dissociation and subsequent sorption on the Boom Clay. The results presented in this study form an important step forward for safety assessments analysis: (i) the model is easy to implement, (ii) there is a link with a phenomenological description, and (iii) elements with a similar NOM association behaviour can be

Use of prebiotic carbohydrate as wall material on lime essential oil microparticles.

Science.gov (United States)

Campelo, Pedro Henrique; Figueiredo, Jayne de Abreu; Domingues, Rosana Zacarias; Fernandes, Regiane Victória de Barros; Botrel, Diego Alvarenga; Borges, Soraia Vilela

2017-09-01

The aim of this work was to study the use of different prebiotic biopolymers in lime essential oil microencapsulation. Whey protein isolate, inulin and oligofructose biopolymers were used. The addition of prebiotic biopolymers reduced emulsion viscosity, although it produced larger droplet sizes (0.31-0.32 µm). Moisture values (2.94-3.13 g/100 g dry solids) and water activity (0.152-0.185) were satisfactory, being within the appropriate range for powdered food quality. Total oil content, limonene retention values and antioxidant activity of the microparticles containing essential oil decreased in the presence of the carbohydrates. The addition of prebiotic biopolymers reduced the microparticle thermal stability. X-ray diffraction confirmed the amorphous characteristic of the microparticles and the interaction of the essential oil with the wall material. The presence of prebiotic biopolymers can be a good alternative for lime essential oil microparticles, mainly using fibre that has a functional food appeal and can improve consumer health.

Hurricane Andrew causes major oil spill at Florida Power ampersand Light Company's Turkey Point Power Plant, Homestead, Florida

International Nuclear Information System (INIS)

Jones, M.A.; Butts, R.L.; Lindsay, J.R.; McCully, B.S.; Pickering, T.H.

1993-01-01

On August 24, 1992, Hurricane Andrew slammed into South Florida with wind gusts in excess of 160 mph. At 4:00 a.m. that day, the eye of this category four storm passed over Florida Power ampersand Light Company's Turkey Point power plant, south of Miami. Although the plant's two nuclear units escaped any significant damage, the storm caused extensive destruction to buildings and transmission facilities, and damaged two 400 foot tall emission stacks associated with the site's two fossil fuel generating units. In addition, a 90,000 to 110,000 gallon spill of No. 6 fuel oil resulted when a piece of wind-blown debris punctured the steel of the unit One 12,000 barrel fuel oil metering tank approximately 30 feet up from the tank bottom. Despite the presence of a secondary containment structure around the tank, the intense wind blew oil throughout the plant site. The damage to the metering tank apparently occurred during the first half hour of the hurricane. As the tank's oil level fell due to the puncture, transfer pumps from the bulk oil storage tanks received a low level alarm which automatically began transferring oil to the damaged metering tank. To prevent the further discharge of oil, plant personnel entered the power block and secured the pumps during the passage of the hurricane eye. Immediately following the storm, facility personnel deployed booms across the barge canal and the Units 1 and 2 intake canal to contain the oil which had entered the water. The response strategy and implementation is described in detail. The remediation costs were approximately $14/gallon spilled, including 54,000 gallons recovered for electricity generation

Global brain storming : oil companies increasingly tap collective intelligence to overcome technology hurdles

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2009-04-15

This article described a novel exploration approach that Toronto-based Goldcorp Inc. took a decade ago when it placed its geological data on the web for a mass collaboration effort among the global community of geologists to identify potential drilling sites. The move resulted in the identification of 110 targets, of which half were entirely new to Goldcorp, and of which four in five struck considerable quantities of gold. The article emphasized that the computer network offers a power that has not yet been fully tapped. It described other companies that have followed suite in finding solutions to proprietary challenges, including Schlumberger, Deloro Resources Ltd., Electro-Petroleum Inc., and Proctor and Gamble Inc. among others. The Web 2.0, which serves as a platform for a range of applications, can also be used for open-source science or global brainstorming. While the idea of open innovation was a novelty a year or two ago, it has now become a necessity. InnoCentive solved a long-standing oil spill problem when a chemist from the web with no ties to the oil industry suggested a way to handle the spill. The Cordova, Alaska-based Oil Spill Recovery Institute has also sought solutions for oil spills and novel boom designs. It was concluded that at a time when research and development budgets in the petroleum industry are being cut, open innovation facilitators stand to benefit. This cross-industry collaboration does not involve geoscientists alone. Rather, it includes people from completely different fields of expertise, experience or education who can add to the real issues that the oil industry needs to address and change. 1 ref.

Medium-Term Oil Market Report 2013: Market Trends and Projections to 2018

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

The global oil market will undergo sweeping changes over the next five years. The 2013 Medium-Term Oil Market Report evaluates the impact of these changes on the global oil system by 2018 based on all that we know today – current expectations of economic growth, existing or announced policies and regulations, commercially proven technologies, field decline rates, investment programmes (upstream, midstream and downstream), etc. The five-year forecast period corresponds to the length of the typical investment cycle and as such is critical to policymakers and market participants. This Report shows, in detailed but concise terms, why the ongoing North American hydrocarbon revolution is a ''game changer''. The region’s expected contribution to supply growth, however impressive, is only part of the story: Crude quality, infrastructure requirements, current regulations, and the potential for replication elsewhere are bound to spark a chain reaction that will leave few links in the global oil supply chain unaffected. While North America is expected to lead medium-term supply growth, the East-of- Suez region is in the lead on the demand side. Non-OECD oil demand, led by Asia and the Middle East, looks set to overtake the OECD for the first time as early as 2Q13 and will widen its lead afterwards. Non-OECD economies are already home to over half global refining capacity. With that share only expected to grow by 2018, the non-OECD region will be firmly entrenched as the world’s largest crude importer. These and other changes are carefully laid out in this Report, which also examines recent and future changes in global oil storage, shifts in OPEC production capacity and crude and product trade, and the consequences of the ongoing refinery construction boom in emerging markets and developing economies. It is required reading for anyone engaged in policy or investment decision-making in the energy sphere, and those more broadly interested in the oil

Urinary retention in women.

Science.gov (United States)

Juma, Saad

2014-07-01

This review is a summary of the most pertinent published studies in the literature in the last 18 months that address cause, diagnosis, and management of urinary retention in women. Symptoms, uroflow, and pressure-flow studies have a low predictive value for and do not correlate with elevated postvoid residual urine (PVR). Anterior and posterior colporrhaphy do not cause de-novo bladder outlet obstruction in the majority of patients with elevated PVR, and the cause of elevated PVR may be other factors such as pain or anxiety causing abnormal relaxation of the pelvic floor and contributing to voiding difficulty. The risk of urinary retention in a future pregnancy after mid-urethral sling (MUS) is small. The risk of urinary tract infection and urinary retention after chemodenervation of the bladder with onabotulinumtoxin-A (100 IU) in patients with non-neurogenic urge incontinence is 33 and 5%, respectively. There is a lack of consensus among experts on the timing of sling takedown in the management of acute urinary retention following MUS procedures. There has been a significant progress in the understanding of the causation of urinary retention. Important areas that need further research (basic and clinical) are post-MUS and pelvic organ prolapse repair urinary retention and obstruction, and urinary retention owing to detrusor underactivity.

From oil-based mud to water-based mud

International Nuclear Information System (INIS)

Christiansen, C.

1991-01-01

Maersk Olie og Gas AS has used low toxic oil-based muds extensively since 1982 for drilling development wells and later in the development of horizontal well drilling techniques. However, in view of the strong drive towards a reduction in the amount of oil discharged to the North Sea from the oil industry, Maersk Olie og Gas AS initiated trials with new or improved types of water-based mud, first in deviated wells (1989) and then in horizontal wells (1990). The paper reviews Maersk Olie og Gas As experience with oil-based mud since the drilling of the first horizontal well in 1987, specifically with respect to cuttings washing equipment, oil retention on cuttings, and the procedure for monitoring of this parameter. It describes the circumstances leading to the decision to revert to water-based mud systems. Finally, it reviews the experience gained so far with the new improved types of water-based mud systems, mainly glycol and KCl/polymer mud systems. Comparison of operational data, such as rate of penetration, torque and drag, etc., is made between wells drilled with oil-based mud and water-based mud. The trials with the new improved types of water-based mud systems have been positive, i.e. horizontal wells can be drilled successfully with water-based mud. As a result, Maersk Olie og and Gas AS has decided to discontinue the use of low toxic oil-based muds in the Danish sector of the North Sea

Technetium behaviour in Boom Clay - a laboratory and field study

International Nuclear Information System (INIS)

Baston, G.M.N.; Ilett, D.J.; Cowper, M.M.; Pilkington, N.J.; Tweed, C.J.; Williams, S.J.; Canniere, P.R. de; Wang, L.

2002-01-01

This paper describes a study of technetium solubility and migration under chemical conditions representative of those prevailing in a Boom Clay environment. Laboratory and in situ measurements yielded similar aqueous concentrations of technetium, of about 1 x 10 -8 mol dm -3 , close to the concentrations measured for hydrated technetium(IV) oxide TcO 2 .1.6H 2 O in the solubility studies. From fitting the curves of the Tc concentrations as function of time, distribution coefficient (K d ) values were estimated to lie between 0.8 cm 3 g -1 and 1.8 cm 3 g -1 . Exposure of the system at 80 C and to γ-radiation dose rates of several hundred Gy h -1 resulted in only minor differences in behaviour. (orig.)

Impact of burning oil as auxiliary fuel in kraft recovery furnaces upon SO2 emissions

International Nuclear Information System (INIS)

Someshwar, A.V.; Caron, A.L.; Pinkerton, J.E.

1990-01-01

The relationship between burning medium sulfur oil as auxiliary fuel in kraft recovery furnaces and SO 2 emissions was examined. Analysis of long-term CEMS SO 2 data from four furnaces shows no increase in SO 2 emissions as a result of oil burning. The results of field tests conducted at four furnaces while co-firing oil with liquor (up to 34% of total heat input) show that (1) average SO 2 emissions during the oil firing period either decreased or remained unchanged; (2) the overall sulfur retention within the furnace remained consistently high (more than 90%) with increasing levels of oil burning; (3) apportioning stack SO 2 emissions between those derived from oil and black liquor was infeasible. The results indicate that the same alkali fume generation processes that lead to the efficient capture of SO 2 resulting from black liquor combustion may be responsible for the capture of SO 2 resulting from sulfur-containing oil combustion

Youth sexual behaviour in a boomtown: implications for the control of sexually transmitted infections.

Science.gov (United States)

Goldenberg, S; Shoveller, J; Ostry, A; Koehoorn, M

2008-06-01

Northeastern British Columbia, Canada, is undergoing rapid in-migration of young, primarily male, workers in response to the "boom" in the oil/gas industries. Chlamydia rates in the region exceed the provincial average by 32% (294.6 cases per 100 000 persons compared with 213.3). Evidence indicates that sociocultural and structural determinants of young people's sexual health are key to consider in the design of interventions. To investigate how sociocultural and structural features related to the oil/gas boom are perceived to affect the sexual behaviour of youth in a Northeastern "boomtown". The study included ethnographic fieldwork (8 weeks) and in-depth interviews with 25 youth (ages 15-25 years) and 14 health/social service providers. Participants identified four main ways in which the sociocultural and structural conditions created by the boom affect sexual behaviours, fuelling the spread of sexually transmitted infections (STIs): mobility of oil/gas workers; binge partying; high levels of disposable income and gendered power dynamics. The sociocultural and structural conditions that are fostered by a resource-extraction boom appear to exacerbate sexual health inequalities among youths who live and work in these rapidly urbanising, remote locales. To meet the needs of this population, we recommend STI prevention and testing service delivery models that incorporate STI testing outreach to oil/gas workers and condom distribution. Global, national and local STI control efforts should consider the realities and needs of similar subpopulations of young people.

Deacidification of Soybean Oil Combining Solvent Extraction and Membrane Technology

Directory of Open Access Journals (Sweden)

M. L. Fornasero

2013-01-01

Full Text Available The aim of this work was to study the removal of free fatty acids (FFAs from soybean oil, combining solvent extraction (liquid-liquid for the separation of FFAs from the oil and membrane technology to recover the solvent through nanofiltration (NF. Degummed soybean oil containing 1.05 ± 0.10% w/w FFAs was deacidified by extraction with ethanol. Results obtained in the experiences of FFAs extraction from oil show that the optimal operating conditions are the following: 1.8 : 1 w : w ethanol/oil ratio, 30 minutes extraction time and high speed of agitation and 30 minutes repose time after extraction at ambient temperature. As a result of these operations two phases are obtained: deacidified oil phase and ethanol phase (containing the FFAs. The oil from the first extraction is subjected to a second extraction under the same conditions, reducing the FFA concentration in oil to 0.09%. Solvent recovery from the ethanol phase is performed using nanofiltration technology with a commercially available polymeric NF membrane (NF-99-HF, Alfa Laval. From the analysis of the results we can conclude that the optimal operating conditions are pressure of 20 bar and temperature of 35°C, allowing better separation performance: permeate flux of 28.3 L/m2·h and FFA retention of 70%.

Deterioration of natural antioxidant species of vegetable edible oils during the domestic deep-frying and pan-frying of potatoes.

Science.gov (United States)

Andrikopoulos, Nikolaos K; Dedoussis, George V Z; Falirea, Ageliki; Kalogeropoulos, Nick; Hatzinikola, Haristoula S

2002-07-01

In the present work, virgin olive oil, sunflower oil and a vegetable shortening were used as cooking oils for the deep-frying and pan-frying of potatoes, for eight successive sessions, under the usual domestic practice. Several chemical and physicochemical parameters (acidic value, peroxide value, total polar artefacts, total phenol content and triglyceride fatty acyl moiety composition) were assayed during frying operations in order to evaluate the status of the frying oils, which were found within expected ranges similar to those previously reported. The oil fatty acids were effectively protected from oxidation by the natural antioxidants. The frying oil absorption by the potatoes was quantitated within 6.1-12.8%, depending on the oil type and the frying process. The retention of alpha- and (beta + gamma)-tocopherols during the eight fryings ranged from 85-90% (first frying) to 15-40% (eighth frying), except for the (beta + gamma)-tocopherols of sunflower oil, which almost disappeared after the sixth frying. The deterioration during the successive frying of several phenolic species present in virgin olive oil is reported for the first time. The retention of total phenolics ranged from 70-80% (first frying) to 20-30% (eighth frying). Tannic acid, oleuropein and hydroxytyrosol-elenolic acid dialdeydic form showed remarkable resistance in all frying sessions in both frying methods, while hydroxytyrosol and hydroxytyrosol-elenolic acid were the faster eliminated. The deterioration of the other phenolic species account for 40-50% and 20-30% for deep-frying and pan-frying, respectively, after three to four frying sessions, which are the most usual in the household kitchen. Deep-frying resulted in better recoveries of all the parameters examined. The correlation of the deterioration rate of the phenolic compounds and tocopherols during frying is discussed and the nutritional aspects of the natural antioxidant intake, through the oil absorbed by the potatoes, are

Factors affecting future crude oil production in South East Asia

International Nuclear Information System (INIS)

Baugh, M.A.

1996-01-01

In the face of booming regional demand, crude oil production in the South East Asian region will decline from a 1996 peak of 5.7 million barrels a day to 3.5 million barrels a day in 2005 unless major new exploration investments are undertaken. The current fiscal terms for such investment will not attract continued significant funds to the region given the low crude price outlook, tough competitive global environment for the upstream industry, and the emergence of more attractive fiscal terms in politically and commercially stable countries with proven prospectivity. There is evidence from the emerging trend toward fiscal terms softening and differentiation around risk in some countries, that the commercial reality is becoming accepted. It remains to be seen if the various national political, bureaucratic and industry constituencies guiding these decisions within the region can respond decisively to mitigate the growing crude import dependency. (author). 2 tabs

Effectiveness of elastic damping in the pivot joints of cargo boom of crane-manipulating installations at large gaps

Directory of Open Access Journals (Sweden)

Lagerev I.A.

2016-03-01

Full Text Available The article was the analysis of dynamic processes in the cylindrical hinges with large gaps in the cargo boom crane-manipulating installations of mobile machines in operation. Consider the design of damping device for articulated joints, which creates a braking force of elastic resistance to the displacement of the hinge pin within the large gap. The mechanism of action of the damping devices was considered. Analysis of the effectiveness of damping device for re-ducing the dynamic stress state in the elements of cargo boom metal structures depending on the gap size and the stiff-ness of the damping device was performed. Damping device with an elastic shock absorbing elements substantially reduces the additional impact load at the time of selection of the gap in the joint, slow the growth of clearance in the pivot joint, limit the size of the gap specified value, which must not be exceeded during the entire service life of swivel independently from the intensity of his load.

Saudi Arabia: Measures of Transition from a Rentier State

National Research Council Canada - National Science Library

Looney, Robert E

2001-01-01

.... Early on after the 1973-74 oil boom, the government decided that a high proportion of the country's oil revenues should be spent in a manner that would encourage private sector investment and production...

Air oxidation and biodegradation of the organic matter from the Boom Claycomparison between artificial and natural altered series

International Nuclear Information System (INIS)

Blanchart, Pascale; Faure, Pierre; Michels, Raymond; Bruggeman, Christophe; De Craen, Mieke

2010-01-01

Document available in extended abstract form only. The Boom Clay formation (Belgium) is studied as the reference host rock for methodological studies on the geological disposal of high-level and long-lived radioactive waste. The drilling of galleries in the Boom Clay at Mol lead to the perturbation of the initial physical and chemical conditions. Since organic matter is present in this argillaceous formation, it is important to know its response to these new conditions. The Boom Clay is of Tertiary age (Rupelian) and has a TOC content up to 5%. Its pore water (20% in mass of rock) contains significant quantities of Dissolved Organic Carbon (DOC) with a mean concentration of 115+/-15 mg/L, determined on the basis of piezometer water as well as squeezing and leaching experiments. Yet, in piezometers, the DOC may show considerable and irregular variations through time, with values ranging between 80 and 425 mg/L. The origin and bio-physico-chemical controls of such variations are yet unknown. Perturbation of the in-situ conditions of the clay is a possible reason for such observation. More likely the introduction of air as well as micro-organisms may have an impact that needs to be estimated. Well-preserved, freshly-drilled Boom Clay samples, as well as samples of different degrees of alteration (air exposed clay from the older galleries) were collected with the aim of determining and quantifying different molecular markers representative for the alteration degree. Additionally, increasing artificial air oxidation experiments were carried out on fresh Praclay samples (sampled during the PRACLAY gallery excavation) in order to obtain an altered reference series. Moreover PRACLAY samples previously extracted with an organic solvent (dichloromethane) were also prepared in order to identify the influence of the kerogen during oxidation. In these experiments, powdered clay was heated at 80 deg. C under air flow during 1, 3, 6, 9, 12, 18 months. Organic matter composition

Changes in the essential oil composition of leaves of Echinodorus macrophyllus exposed to

Directory of Open Access Journals (Sweden)

Thiago M. Silva

2013-08-01

Full Text Available Leaves of Echinodorus macrophyllus (Kunth Micheli, Alismataceae, were exposed to different doses of γ-radiation (0.00, 1.00, 3.00, 5.00, 10.00, and 20.00 kGy and the chemical composition of their essential oils was investigated. The extractive process of the essential oil was more favored when the leaves were irradiated. The essential oil components were identified by correlation between GC-FID data and retention parameters obtained from the Kováts method. Moreover, GC-MS analyses of the essential oils were correlated with fragmentation profiles in the NIST standard mass fragmentation data bank. The essential oil of E. macrophyllus contains biologically active constituents of different chemical classes. Acyclic monoterpenes and sesquiterpenes showed increase in concentration when the leaves were exposed to γ-radiation. On the other hand, the component concentrations of some chemical classes were lightly decreased, i.e., for bicyclic monoterpenes, diterpenes, triterpenes, carboxylic esters, and carotenoid derivatives.

Development of a practical methodology for integrating shoreline oil-holding capacity into modeling

International Nuclear Information System (INIS)

Schmidt Etkin, D.; French-McCay, D.; Rowe, J.; Michel, J.; Boufadel, M.; Li, H.

2008-01-01

The factors that influence the behaviour of oil in the aftermath of an oil spill on water include oil type and characteristics; oil thickness on the shoreline; time until shoreline impact; timing with regards to tides; weathering during and after the spill; and nearshore wave energy. The oil behaviour also depends on the shoreline characteristics, particularly porosity and permeability. The interactions of spilled oil with sediments on beaches must be well understood in order to model the oil spill trajectory, fate and risk. The movement of oil can be most accurately simulated if the algorithm incorporates an estimate of shoreline oil retention. This paper presented a literature review of relevant shoreline oiling studies and considered the relevance of study findings for inclusion in modelling. Survey data from a detailed shoreline cleanup assessment team (SCAT) were analyzed for patterns in oil penetration and oil-holding capacity by shoreline sediment type and oil type for potential use in modelling algorithms. A theoretical beach hydraulics model was then developed for use in a stochastic spill model. Gaps in information were identified, including the manner in which wave action and other environmental variables have an impact on the dynamic processes involved in shoreline oiling. The methodology presented in this paper can be used to estimate the amount of oil held by a shoreline upon impact to allow a trajectory model to more accurately project the total spread of oil. 27 refs., 13 tabs., 3 figs

How important are national companies for oil and gas sector performance? Lessons from the Bolivia and Brazil case studies

International Nuclear Information System (INIS)

Paz Antolín, María José; Ramírez Cendrero, Juan Manuel

2013-01-01

Control of natural resources, especially oil and gas, has been a major issue in the consideration of underdevelopment. In the present commodity boom, some Latin American economies are reforming their resource exploitation regimes, especially those issues linked with foreign capital share. The purpose of this report is to analyze these changes in the Bolivian and Brazilian oil and gas sectors in order to answer such questions as: Which property system combining public and private capital is the most suitable? Which regulating framework can guarantee a sustainable increase in output and investment? Our analyses lead to the conclusion that the regulatory framework can establish a particular ownership structure that is considered favorable for improving the performance of oil and gas sector, but the internal dynamics and the historical trajectories of enterprises will also be determining factors that interact with the given regulatory framework, generating mixed results. - highlights: • We analyze the influence of the regulatory framework in the growth of production. • We analyze the influence of the regulatory framework in investment dynamics. • We compare the regulatory frameworks for Brazil and Bolivia. • We compare the importance of public and private companies in hydrocarbons in Brazil and Bolivia

The role of natural organic matter in the migration behaviour of americium in the Boom clay - Part II: analysis of migration experiments

International Nuclear Information System (INIS)

Hicks, T.; Bennett, D.; Maes, N.; Wang, L.; Warwick, P.; Hall, T.; Walker, G.; Dierckx, A.

2005-01-01

Full text of publication follows: In demonstrating the suitability of Boom Clay as a potential site for the disposal of radioactive waste in Belgium, the role of the relatively high amount of Natural Organic Matter (NOM) present in the Boom Clay on the mobility of critical radionuclides needs investigation. Trivalent actinides and lanthanides form strong complexes with humic substances. Complexation of these trivalent radionuclides with NOM present in the Boom Clay may have opposing effects. If complexed by the aqueous phase (mobile) NOM, radionuclide transport will be governed by the mobility of these dissolved radionuclide-NOM species. If complexed by the solid phase (immobile) NOM, migration will be retarded. One of the aims of the EC projects TRANCOM-Clay and TRANCOM-II was to investigate the role of mobile NOM as radionuclide carrier with the objective of deriving conceptual models that can be implemented in repository performance assessment (PA) models. A separate paper describes the results of column migration experiments involving the transport of 241 Am- 14 C-NOM complexes through Boom Clay cores. This paper describes the transport model, POPCORN, that was developed to describe and evaluate the influence of NOM on radionuclide transport in clay, taking into account attachment/detachment rates of NOM to clay surfaces and the kinetics of RN complexation to, and destabilization from, NOM. The POPCORN model was used to evaluate diffusion experiments involving injection of 14 C-labelled NOM in Boom Clay cores. Model fits were obtained by varying the rates of filtration of NOM by attachment to the surface of the clay matrix. POPCORN was then used to analyse the 241 Am- 14 C-NOM migration experiments. The stability properties of the 241 Am-NOM were characterised by kinetic constants, and good matches to the migration data were achieved for the experiments. The findings suggest that a small sub-population of the original 241 Am-OM is the most stable, and that this

Combination of capillary GC, GC/MS and 13C-NMR for the characterization of the rhizome oil of Piper betle L. (Piperaceae) from Vietnam

NARCIS (Netherlands)

Thanh, L.; Dung, N.X.; Bighelli, A.; Casanova, J.; Leclercq, P.A.

1997-01-01

The essential oil from the rhizomes of Piper betle L. (betel), collected around Hue, was obtained in 0.20% yield. The oil was examined by a combination of capillary GC and GC/MS. 13C-NMR studies confirmed the structure assignments proposed by retention data and mass spectra of the components with a

Testing the Deployment Repeatability of a Precision Deployable Boom Prototype for the Proposed SWOT Karin Instrument

Science.gov (United States)

Agnes, Gregory S.; Waldman, Jeff; Hughes, Richard; Peterson, Lee D.

2015-01-01

NASA's proposed Surface Water Ocean Topography (SWOT) mission, scheduled to launch in 2020, would provide critical information about Earth's oceans, ocean circulation, fresh water storage, and river discharge. The mission concept calls for a dual-antenna Ka-band radar interferometer instrument, known as KaRIn, that would map the height of water globally along two 50 km wide swaths. The KaRIn antennas, which would be separated by 10 meters on either side of the spacecraft, would need to be precisely deployable in order to meet demanding pointing requirements. Consequently, an effort was undertaken to design build and prototype a precision deployable Mast for the KaRIn instrument. Each mast was 4.5-m long with a required dilitation stability of 2.5 microns over 3 minutes. It required a minimum first mode of 7 Hz. Deployment repeatability was less than +/- 7 arcsec in all three rotation directions. Overall mass could not exceed 41.5 Kg including any actuators and thermal blanketing. This set of requirements meant the boom had to be three times lighter and two orders of magnitude more precise than the existing state of the art for deployable booms.

Layout of the manipulator-arm (boom) for the TFTR fusion reactor (Princeton, USA) under UHV-conditions

International Nuclear Information System (INIS)

Klaubert, J.

1987-01-01

This presentation shows the main criteria for the layout of the manipulator - arm and the antechamber - vessel of the TFTR - FUSION - REACTOR at Princeton University, PLASMA PHYSICS LABORATORY (USA). The main problem during layout of a manipulator system like the TFTR - Boom has been the limitation of the vertical deflections due to deadweight of the construction. The design problem is rather a deformation problem and a problem of stability than a stress problem. The way of optimizing the ratio between stiffness and deadweight is the most important part during the complete design - process. Additional earthquake requirements need further investigations for a satisfying layout (horizontal forces, weak-axis of moment of inertia). The details of the construction (welding, connections etc.) have to be designed in respect to UHV - requirements --> no holes and no fillet welds (outgasing - rate.) are allowed. All weldings have to be designed as bevel-welds. This manipulator system is designed for working in a plane system (two degrees of freedom). A manipulator system with the same operating capabilities in a three degree of freedom system needs larger cross sections for the different beam-elements than those of the discussed TFTR - BOOM

Simplified tools for measuring retention in care in antiretroviral treatment program in Ethiopia: cohort and current retention in care.

Science.gov (United States)

Assefa, Yibeltal; Worku, Alemayehu; Wouters, Edwin; Koole, Olivier; Haile Mariam, Damen; Van Damme, Wim

2012-01-01

Patient retention in care is a critical challenge for antiretroviral treatment programs. This is mainly because retention in care is related to adherence to treatment and patient survival. It is therefore imperative that health facilities and programs measure patient retention in care. However, the currently available tools, such as Kaplan Meier, for measuring retention in care have a lot of practical limitations. The objective of this study was to develop simplified tools for measuring retention in care. Retrospective cohort data were collected from patient registers in nine health facilities in Ethiopia. Retention in care was the primary outcome for the study. Tools were developed to measure "current retention" in care during a specific period of time for a specific "ART-age group" and "cohort retention" in care among patients who were followed for the last "Y" number of years on ART. "Probability of retention" based on the tool for "cohort retention" in care was compared with "probability of retention" based on Kaplan Meier. We found that the new tools enable to measure "current retention" and "cohort retention" in care. We also found that the tools were easy to use and did not require advanced statistical skills. Both "current retention" and "cohort retention" are lower among patients in the first two "ART-age groups" and "ART-age cohorts" than in subsequent "ART-age groups" and "ART-age cohorts". The "probability of retention" based on the new tools were found to be similar to the "probability of retention" based on Kaplan Meier. The simplified tools for "current retention" and "cohort retention" will enable practitioners and program managers to measure and monitor rates of retention in care easily and appropriately. We therefore recommend that health facilities and programs start to use these tools in their efforts to improve retention in care and patient outcomes.

Simplified tools for measuring retention in care in antiretroviral treatment program in Ethiopia: cohort and current retention in care.

Directory of Open Access Journals (Sweden)

Yibeltal Assefa

Full Text Available INTRODUCTION: Patient retention in care is a critical challenge for antiretroviral treatment programs. This is mainly because retention in care is related to adherence to treatment and patient survival. It is therefore imperative that health facilities and programs measure patient retention in care. However, the currently available tools, such as Kaplan Meier, for measuring retention in care have a lot of practical limitations. The objective of this study was to develop simplified tools for measuring retention in care. METHODS: Retrospective cohort data were collected from patient registers in nine health facilities in Ethiopia. Retention in care was the primary outcome for the study. Tools were developed to measure "current retention" in care during a specific period of time for a specific "ART-age group" and "cohort retention" in care among patients who were followed for the last "Y" number of years on ART. "Probability of retention" based on the tool for "cohort retention" in care was compared with "probability of retention" based on Kaplan Meier. RESULTS: We found that the new tools enable to measure "current retention" and "cohort retention" in care. We also found that the tools were easy to use and did not require advanced statistical skills. Both "current retention" and "cohort retention" are lower among patients in the first two "ART-age groups" and "ART-age cohorts" than in subsequent "ART-age groups" and "ART-age cohorts". The "probability of retention" based on the new tools were found to be similar to the "probability of retention" based on Kaplan Meier. CONCLUSION: The simplified tools for "current retention" and "cohort retention" will enable practitioners and program managers to measure and monitor rates of retention in care easily and appropriately. We therefore recommend that health facilities and programs start to use these tools in their efforts to improve retention in care and patient outcomes.

Fatigue crack behaviour in mine excavator

Energy Technology Data Exchange (ETDEWEB)

Yin, Y.; Grondin, G.Y.; Elwi, A.E. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering

2006-05-15

Fatigue cracking in excavation equipment represents a significant operating cost for oil sands operators. It is caused by high impact loads, the high frequency of load cycles, and large component sizes found in oil sands processing facilities. Monitoring and repair strategies for fatigue cracks are typically based on vendor specifications and the experience of maintenance personnel. This paper provided details of an optimized crack management program applied to a BE 395B shovel boom. The proposed crack management tool uses a chart to predict the remaining life of a corner crack in the shovel boom. Predictions are based on limited field measurements of operating loads as well as on data obtained from fatigue testing of boom material, and a finite element analysis of the shovel boom. Field and laboratory data are used along with fracture mechanics and finite element modelling to predict crack life. It was concluded that the tool will allow inspectors and planners to schedule repairs based on safe service life. The tool is applicable for any components subjected to fatigue loading. 3 refs., 21 tabs., 64 figs.

The Perceived Work Ethic of K-12 Teachers by Generational Status: Generation X vs. Baby Boom Generation

Science.gov (United States)

Petty, Gregory C.

2013-01-01

This was an investigation of the work ethic of K-12 educators from Generation X and Baby Boomer generations. Teachers of the baby boom generation were born between 1946 and 1964, and many are beginning to retire. There is an impending teacher shortage due to the large numbers of this group retiring or leaving the profession. School administrators…

Seed Implant Retention Score Predicts the Risk of Prolonged Urinary Retention After Prostate Brachytherapy

International Nuclear Information System (INIS)

Lee, Hoon K.; Adams, Marc T.; Shi, Qiuhu; Basillote, Jay; LaMonica, Joanne; Miranda, Luis; Motta, Joseph

2010-01-01

Purpose: To risk-stratify patients for urinary retention after prostate brachytherapy according to a novel seed implant retention score (SIRS). Patients and Methods: A total of 835 patients underwent transperineal prostate seed implant from March 1993 to January 2007; 197 patients had 125 I and 638 patients had 103 Pd brachytherapy. Four hundred ninety-four patients had supplemental external-beam radiation. The final downsized prostate volume was used for the 424 patients who had neoadjuvant hormone therapy. Retention was defined as reinsertion of a Foley catheter after the implant. Results: Retention developed in 7.4% of patients, with an average duration of 6.7 weeks. On univariate analysis, implant without supplemental external-beam radiation (10% vs. 5.6%; p = 0.02), neoadjuvant hormone therapy (9.4% vs. 5.4%; p = 0.02), baseline α-blocker use (12.5% vs. 6.3%; p = 0.008), and increased prostate volume (13.4% vs. 6.9% vs. 2.9%, >45 cm 3 , 25-45 cm 3 , 3 ; p = 0.0008) were significantly correlated with increased rates of retention. On multivariate analysis, implant without supplemental external-beam radiation, neoadjuvant hormone therapy, baseline α-blocker use, and increased prostate volume were correlated with retention. A novel SIRS was modeled as the combined score of these factors, ranging from 0 to 5. There was a significant correlation between the SIRS and retention (p < 0.0001). The rates of retention were 0, 4%, 5.6%, 9%, 20.9%, and 36.4% for SIRS of 0 to 5, respectively. Conclusions: The SIRS may identify patients who are at high risk for prolonged retention after prostate brachytherapy. A prospective validation study of the SIRS is planned.

Geo-scientific characterisation of the Boom Clay in the Netherlands in light of permanent confinement of radio-active waste

NARCIS (Netherlands)

Griffioen, J.J.; Simmelink, E.; Westerhoff, W.; Koenen, M.; Tambach, T.; Behrends, T.

2012-01-01

Recently, the OPERA research program has been initiated in the Netherlands. Its central objective is to develop initial, conditional safety cases for repositories in the Boom Clay and Zechstein rocksalt formations. TNO Geological Survey of the Netherlands has been granted two projects that deal with

Fast Pyrolysis Oil Stabilization: An Integrated Catalytic and Membrane Approach for Improved Bio-oils. Final Report

Energy Technology Data Exchange (ETDEWEB)

Huber, George W.; Upadhye, Aniruddha A.; Ford, David M.; Bhatia, Surita R.; Badger, Phillip C.

2012-10-19

This University of Massachusetts, Amherst project, "Fast Pyrolysis Oil Stabilization: An Integrated Catalytic and Membrane Approach for Improved Bio-oils" started on 1st February 2009 and finished on August 31st 2011. The project consisted following tasks: Task 1.0: Char Removal by Membrane Separation Technology The presence of char particles in the bio-oil causes problems in storage and end-use. Currently there is no well-established technology to remove char particles less than 10 micron in size. This study focused on the application of a liquid-phase microfiltration process to remove char particles from bio-oil down to slightly sub-micron levels. Tubular ceramic membranes of nominal pore sizes 0.5 and 0.8m were employed to carry out the microfiltration, which was conducted in the cross-flow mode at temperatures ranging from 38 to 45 C and at three different trans-membrane pressures varying from 1 to 3 bars. The results demonstrated the removal of the major quantity of char particles with a significant reduction in overall ash content of the bio-oil. The results clearly showed that the cake formation mechanism of fouling is predominant in this process. Task 2.0 Acid Removal by Membrane Separation Technology The feasibility of removing small organic acids from the aqueous fraction of fast pyrolysis bio-oils using nanofiltration (NF) and reverse osmosis (RO) membranes was studied. Experiments were carried out with a single solute solutions of acetic acid and glucose, binary solute solutions containing both acetic acid and glucose, and a model aqueous fraction of bio-oil (AFBO). Retention factors above 90% for glucose and below 0% for acetic acid were observed at feed pressures near 40 bar for single and binary solutions, so that their separation in the model AFBO was expected to be feasible. However, all of the membranes were irreversibly damaged when experiments were conducted with the model AFBO due to the presence of guaiacol in the feed solution. Experiments

Stay the Course or Seize an Opportunity? Options for Alberta’s Post-Secondary Institutions in a Period of Uncertainty About the Rebound of the Oil Economy

Directory of Open Access Journals (Sweden)

Ken Norrie

2017-09-01

Full Text Available Colleges and universities in Alberta feel the booms and busts of the oil-driven economy, too. When oil prices are high, and oil exploration and new project construction are booming, post-secondary institutions will often find themselves unable to keep up with the demand for the education and skills-training programs that employers are clamouring for, with fewer spots available for students than there are students eager to fill them. When oil prices drop, and exploration and construction dry up, the schools face the opposite problem: They have too much capacity in the kinds of programs for skills that traditionally serve those sectors directly connected to oil, or closely linked to them, where there is suddenly a glut of available labour. Making matters particularly complicated is that when oil prices fall, there is never any certainty of when they will rebound. If the lower oil prices are short lived like after 2009, colleges and universities have needed only to be patient and ride out shortterm disruptions, without the need to restructure their program offerings. However, that was not the case after 1985, where oil prices stagnated for an extended period of time. Now, some observers project that the decline in oil prices that began in 2014, with prices yet to fully recover, could last even longer, perhaps with oil becoming the “new coal” and remaining in glut indefinitely. Not knowing whether oil prices will rebound sooner, later, or never puts Alberta’s post-secondary institutions in a tricky situation. Their programs providing skilled workers to the province’s oil-based economy are longstanding and well-respected and the prospect of shrinking them or dismantling them, and shifting a school’s focus to different programming priorities, should not be taken lightly as it could be very expensive to reverse if oil prices do indeed end up rebounding. But if they do not, they will nevertheless face pressure to do so, anyway, due to the

An alternative method for identifying booms and busts in the euro area housing market

OpenAIRE

Gerdesmeier, Dieter; Roffia, Barbara; Lenarcic, Andreja

2012-01-01

The main aim of this paper is to apply a method based on fundamentals ─ which has already been applied in the stock market analysis ─ to detect boom/bust in the housing market, with a focus on the euro area. In this context, an underlying model is developed and tested. It turns out that the user cost rate, a demographic variable, the unemployment rate, disposable income (or disposable income per capita), the debt-to-income ratio and, finally, the housing stock are fundamental variables which ...

Improved Physicochemical Properties of Yogurt Fortified with Fish Oil/γ-Oryzanol by Nanoemulsion Technology.

Science.gov (United States)

Zhong, Jinfeng; Yang, Rong; Cao, Xiaoyi; Liu, Xiong; Qin, Xiaoli

2018-01-02

Fish oil has several dietary benefits, but its application in food formulations is limited because of its poor water-solubility, easy oxidation and strong odor. The purposes of this study were to produce a fish oil/γ-oryzanol nanoemulsion and to evaluate the effect of adding this nanoemulsion on the physicochemical and sensory characteristics of yogurts. Adding fish oil/γ-oryzanol nanoemulsion resulted in a significant reduction in the acidity and syneresis of yogurt. Yogurt with the nanoemulsion had significantly lower peroxide value (0.28 mmol/L after 21 days) and higher retention of eicosapentaenoic acid and docosahexaenoic acid contents (decreased to 95% and 94% of its initial value, respectively) than yogurt with fish oil/γ-oryzanol (peroxide value = 0.65 mmol/L; eicosapentaenoic acid and docosahexaenoic acid contents decreased to 72% and 53% of its initial value, respectively). Fish oil/γ-oryzanol nanoemulsion incorporated into yogurt had closer sensory attributes scores to plain yogurt. This study may have important implications for the application of fish oil/γ-oryzanol nanoemulsion in yogurt.

Use of reverse osmosis membranes for the separation of lemongrass essential oil and supercritical CO2

Directory of Open Access Journals (Sweden)

L.A.V. Sarmento

2004-06-01

Full Text Available Although it is still used very little by industry, the process of essential oil extraction from vegetable matrices with supercritical CO2 is regarded as a potentially viable technique. The operation of separating the extract from the solvent is carried out by reducing the pressure in the system. Separation by membranes is an alternative that offers lower energy consumption and easier operation than traditional methods of separation. Combining the processes essential oil extraction with supercritical CO2 and separation by membranes permits the separation of solvent and oil without the need for large variations in extraction conditions. This results in a large energy savings in the case of solvent repressurisation and reuse. In this study, the effectiveness of reverse osmosis membranes in separating lemongrass essential oil from mixtures with supercritical CO2 was tested. The effects of feed oil concentration and transmembrane pressure on CO2 permeate flux and oil retention were studied for three membrane models.

Technetium behaviour in Boom Clay - a laboratory and field study

Energy Technology Data Exchange (ETDEWEB)

Baston, G.M.N.; Ilett, D.J.; Cowper, M.M.; Pilkington, N.J.; Tweed, C.J.; Williams, S.J. [AEA Technology plc, Harwell, Didcot, Oxfordshire (United Kingdom); Canniere, P.R. de; Wang, L. [SCK.CEN, Waste and Disposal Project, Boeretang, Mol (Belgium)

2002-07-01

This paper describes a study of technetium solubility and migration under chemical conditions representative of those prevailing in a Boom Clay environment. Laboratory and in situ measurements yielded similar aqueous concentrations of technetium, of about 1 x 10{sup -8} mol dm{sup -3}, close to the concentrations measured for hydrated technetium(IV) oxide TcO{sub 2}.1.6H{sub 2}O in the solubility studies. From fitting the curves of the Tc concentrations as function of time, distribution coefficient (K{sub d}) values were estimated to lie between 0.8 cm{sup 3} g{sup -1} and 1.8 cm{sup 3} g{sup -1}. Exposure of the system at 80 C and to {gamma}-radiation dose rates of several hundred Gy h{sup -1} resulted in only minor differences in behaviour. (orig.)

Comparison of chemical profiles of selected gaharu oils from peninsular Malaysia

International Nuclear Information System (INIS)

Norazah, M.A.; Chang, Y.S.; Mailina, J.; Abu, S.A.; Abdul Majid, J.; Saidatul, H.S.; Norhasnida, H.; Nik Yasmin, Y.

2008-01-01

Gaharu (agar wood) is a fragrant wood that is usually derived from the diseased timber of the genus Aquilaria (Thymelaeceae) and often occurs as dark coloured patches or streaks in the tree. Due to its strong, unique scent and medicinal properties, gaharu oil is greatly valued as perfumery ingredient and incense. Gaharu may be classified into various grades; Grade A, B, C and D and they are often graded according to the physical properties, gaharu formation and its unique scent. The lower grades such as Grade C are often distilled to obtain gaharu oils. As part of an on-going research on the chemical profiling of some Malaysian gaharu oils and evaluation of their potential beneficial properties; gaharu oils obtained from different sources were analysed and compared by GC and GC-MS. Identification of the chemical components was based on comparison of calculated retention indices and mass spectral data with literature values. Examination of the oils showed some variations and differences in terms of GC profiles, concentration and chemical components. Majority of the essential oil profiles were complex and made up of sesquiterpenoids and their oxygenated derivatives. However, common occurrences of chemical compounds such as 3-phenyl-butanone, α-guaiene, β-agar ofuran, α-agar ofuran, agarospirol and jinkoh-eremol were detected. (author)

Urinary Retention Associated with Stroke.

Science.gov (United States)

Umemura, Takeru; Ohta, Hirotsugu; Yokota, Akira; Yarimizu, Shiroh; Nishizawa, Shigeru

Patients often exhibit urinary retention following a stroke. Various neuropathological and animal studies have implicated the medulla oblongata, pons, limbic system, frontal lobe as areas responsible for micturition control, although the exact area responsible for urinary retention after stroke is not clear. The purpose of this study was to identify the stroke area responsible for urinary retention by localizing the areas where strokes occur. We assessed 110 patients with cerebral infarction and 27 patients with cerebral hemorrhage (78 men, 59 women; mean age, 73.0 years) who had been admitted to our hospital between October, 2012 and September, 2013. We used computed tomography (CT) and magnetic resonance imaging (MRI) to investigate the stroke location, and evaluated whether post-stroke urinary retention occurred. Twelve (8.8%) of the 137 patients (7 men, 5 women; mean age, 78.8 years) exhibited urinary retention after a stroke. Stroke occurred in the right/left dominant hemisphere in 7 patients; nondominant hemisphere in 1; cerebellum in 3; and brainstem in 1. Strokes in the dominant hemisphere were associated with urinary retention (P = 0.0314), particularly in the area of the insula (P < 0.01). We concluded that stroke affecting the insula of the dominant hemisphere tends to cause urinary retention.

Use of bore logging for the determination of lithological characteristics of the Boom clay formation and interest for correlations in clay

International Nuclear Information System (INIS)

Neerdael, B.; Bonne, A.; Manfroy, P.; Vandenberghe, N.; Fierens, E.; Laga, P.

1981-01-01

It is first recalled that the purpose of the HADES project of the CEN/SCK at Mol (Belgium) is to study the possibility of geological disposal for radioactive wastes in the Boom clay formation at a depth between +-160 and 270 m. The different steps and aspects of the site investigation are exposed, and for each of them, the specific techniques used are reviewed. One of these steps is elaborated more in detail. It covers namely the lateral extrapolation of the lithological variations as established from a very detailed analysis of the initial cored boring. Among the usefull methods, the most practical and refined results were obtained from the resistivity logs in the reconnaissance holes. Finally, examples are shown of very detailed correlation on site scale, scale of the hydrogeological entity and regional scale (occurrence of Boom clay on the belgian territory)

Encapsulation of lemongrass oil with cyclodextrins by spray drying and its controlled release characteristics.

Science.gov (United States)

Phunpee, Sarunya; Ruktanonchai, Uracha Rangsadthong; Yoshii, Hidefumi; Assabumrungrat, Suttichai; Soottitantawat, Apinan

2017-04-01

Inclusion of the two isomers of citral (E-citral and Z-citral), components of lemongrass oil, was investigated within the confines of various cyclodextrin (α-CD, β-CD and γ-CD) host molecules. Aqueous complex formation constants for E-citral with α-CD, β-CD and γ-CD were determined to be 123, 185, and 204 L/mol, respectively, whereas Z-citral exhibited stronger affinities (157, 206, and 253 L/mol, respectively). The binding trend γ-CD > β-CD > α-CD is a reflection of the more favorable geometrical accommodation of the citral isomers with increasing cavity size. Encapsulation of lemongrass oil within CDs was undertaken through shaking citral:CD (1:1, 1.5:1, and 2:1 molar ratio) mixtures followed by spray drying. Maximum citral retention occurred at a 1:1 molar ratio with β-CD and α-CD demonstrating the highest levels of total E-citral and Z-citral retention, respectively. Furthermore, the β-CD complex demonstrated the slowest release rate of all inclusion complex powders.

An Economic Rationale for the West African Scramble? The Commercial Transition and the Commodity Price Boom of 1835-1885

NARCIS (Netherlands)

Frankema, Ewout; Williamson, Jeffrey; Woltjer, Pieter

2018-01-01

We use a new trade dataset showing that nineteenth century Sub-Saharan Africa experienced a terms of trade boom comparable to other parts of the ‘global periphery’. A sharp rise in export prices in the five decades before the scramble (1835-1885) was followed by an equally impressive decline during

The Speed of Light and the Hubble parameter: The Mass-Boom Effect

International Nuclear Information System (INIS)

Alfonso-Faus, Antonio

2008-01-01

We prove here that Newton's universal gravitation and momentum conservation laws together reproduce Weinberg's relation. It is shown that the Hubble parameter H must be built in this relation, or equivalently the age of the Universe t. Using a wave-to-particle interaction technique we then prove that the speed of light c decreases with cosmological time, and that c is proportional to the Hubble parameter H. We see the expansion of the Universe as a local effect due to the LAB value of the speed of light co taken as constant. We present a generalized red shift law and find a predicted acceleration for photons that agrees well with the result from Pioneer 10/11 anomalous acceleration. We finally present a cosmological model coherent with the above results that we call the Mass-Boom. It has a linear increase of mass m with time as a result of the speed of light c linear decrease with time, and the conservation of momentum mc. We obtain the baryonic mass parameter equal to the curvature parameter, Ω m Ω k , so that the model is of the type of the Einstein static, closed, finite, spherical, unlimited, with zero cosmological constant. This model is the cosmological view as seen by photons, neutrinos, tachyons etc. in contrast with the local view, the LAB reference. Neither dark matter nor dark energy is required by this model. With an initial constant speed of light during a short time we get inflation (an exponential expansion). This converts, during the inflation time, the Planck's fluctuation length of 10 -33 cm to the present size of the Universe (about 10 28 cm, constant from then on). Thereafter the Mass-Boom takes care to bring the initial values of the Universe (about 10 15 gr) to the value at the present time of about 10 55 gr

Pore-water chemistry effects on the compressibility behaviour of Boom Clay

International Nuclear Information System (INIS)

Deng, Y.F.; Cui, Y.J.; Tang, A.M.; Nguyen, X.P.; Li, X.L.; Maarten, V.G.

2010-01-01

Document available in extended abstract form only. Boom clay is a thick deposit of over-consolidated marine clay, and belongs to the Oligocene series. Its hydraulic conductivity has been investigated since many years in Belgium within the site characterization program related to the performance assessment of potential geological disposal of high-level radioactive waste in this formation. Recently, the work of Wemaere et al. (2008) shows a significant variability of the hydraulic conductivity of the Boom clay. Indeed, they performed measurements on soil cores taken from four distant boreholes at various depths. The vertical hydraulic conductivity was found to vary from 3 x 10 -12 to 10 x 10 -12 m/s. It is suspected that this variability would be partly related to the water chemistry effects. Indeed, De Craen et al. (2006) shows that the pore-water chemical composition of soil cores taken from the Essen site is significantly different from that at the Mol site. If the pore water chemistry has strong effect on the hydraulic conductivity, its effect on the mechanical behaviour needs to be investigated too. The aim of this paper is to verify whether there are significant effects of pore-water chemistry on the soil compressibility. This study would be helpful to transpose the knowledge obtained from the Mol site to other sites of Boom clay formation where the geochemical components are different from the former site, as the hydro-mechanical characteristics of Boom clay at the Mol site has been widely investigated since the last decades. Two soil cores were taken from the Essen site at a depth of 227 m (Ess83) and 240 m (Ess96). Based on the geochemical analysis presented by De Craen et al. (2006), synthetic water having similar chemical composition of the in-situ pore-water was prepared. The identification geotechnical characteristics of these cores are shown in Table 2. It can be observed that the clay content (particle size < 2 μm) is relatively high (more than 50

Does skill retention benefit from retentivity and symbolic rehearsal? - two studies with a simulated process control task.

Science.gov (United States)

Kluge, Annette; Frank, Barbara; Maafi, Sanaz; Kuzmanovska, Aleksandra

2016-05-01

Two experiments were designed to compare two symbolic rehearsal refresher interventions (imaginary practice, a hidden introspective process) and investigate the role of retentivity in skill retention. Retentivity is investigated as the ability to memorise and reproduce information and associations that were learned a short time ago. Both experiments comprised initial training (week 1), a symbolic rehearsal for the experimental group (week 2) and a retention assessment (week 3). In the first study, the experimental group received a symbolic rehearsal, while the control group received no rehearsal. In the second study, the experimental group received the same symbolic rehearsal used in study 1, enhanced with rehearsal tasks addressing human-computer interaction. The results showed that both symbolic rehearsal interventions were equally likely to mitigate skill decay. The retentivity showed medium to high correlations with skill retention in both studies, and the results suggest that subjects high in retentivity benefit more from a symbolic rehearsal refresher intervention. Practitioner Summary: Skill decay becomes a problem in situations in which jobs require the correct mastery of non-routine situations. Two experimental studies with simulated process control tasks showed that symbolic rehearsal and retentivity can significantly mitigate skill decay and that subjects higher in retentivity benefit more from refresher interventions.

Urease Inhibition of Fixed Oils and Fractions of Caralluma tuberculata: Component Identification by GC-MS

International Nuclear Information System (INIS)

Khan, M. A.; Khan, H.; Saeed, M.; Rauf, A.; Basharat, T.; Khan, A.

2015-01-01

The in vitro urease inhibitory activity of fixed oil and various organic fractions of Caralluma tuberculata followed by GC-MS analysis of the fixed oil are described in this research article. The fixed oil caused marked attenuation of jack bean urease with half-maximal inhibitory concentration (IC50) of 2.97 mg/ml. The similar urease inhibitory profile was observed for chloroform and ethyl acetate fractions with IC50 values of 3.36 and 4.90 mg/ml, respectively. GC-MS analysis led to the identification of 20 different constituents of the fixed oil by their m/z ratio and retention time in comparison with the standard compounds. The major constituents were methyl linoleate (30.97%) followed by methyl octadecadienoate (19.16%), ethyl linolenate (13.70 %), and methyl palmitate (9.86 %). The fixed oil and organic fractions of C. tuberculata exhibited marked urease inhibition and thus provide scientific background for use of the plant as antiulcer agent. (author)

Institutionalizing Emerging Technology Assessment Process into National Incident Response

Science.gov (United States)

2013-10-01

mechanical methods, devices, and products, including oil sensors, booms, skimmers, decontamination , and waste minimization technologies...handling). • Alternative Oil Spill Response Technologies (in situ burning , dispersants, etc.). • Oil Spill Damage Assessment and Restoration. The TETs...deaths of eleven crewmembers and a subsequent uncontrolled oil spill that tested the government’s ability to respond to a spill of this magnitude as

Military Retention. A Comparative Outlook

Directory of Open Access Journals (Sweden)

Vasile Sminchise

2016-06-01

Full Text Available One of the main goals for human resources management structures and for armed forces leaders is to maintain all necessary personnel, both qualitatively and quantitatively for operational needs or for full required capabilities. The retention of military personnel is essential to keep morale and unit readiness and to reduce the costs for recruiting, training, replacement of manpower. Retention rates depend not only on money or other social measures. The goal for retention is to keep in use the most valuable resource that belongs to an organization: the human beings and their knowledge. The aim pf this paper is to provide a comparative analysis of retention measures in various countries based on Research and Technology Organisation report released in 2007 and, thus, provide more examples of retention measures as far as the Romanian military system is concerned.

Retention of Root Canal Posts

DEFF Research Database (Denmark)

Sahafi, A; Benetti, Ana Raquel; Flury, S

2015-01-01

The aim of this study was to investigate the effect of the cement film thickness of a zinc phosphate or a resin cement on retention of untreated and pretreated root canal posts. Prefabricated zirconia posts (CosmoPost: 1.4 mm) and two types of luting cements (a zinc phosphate cement [DeTrey Zinc...... received tribochemical silicate coating according to the manufacturer's instructions. Posts were then luted in the prepared root canals (n=30 per group). Following water storage at 37°C for seven days, retention of the posts was determined by the pull-out method. Irrespective of the luting cement......, pretreatment with tribochemical silicate coating significantly increased retention of the posts. Increased cement film thickness resulted in decreased retention of untreated posts and of pretreated posts luted with zinc phosphate cement. Increased cement film thickness had no influence on retention...

Job embeddedness and nurse retention.

Science.gov (United States)

Reitz, O Ed; Anderson, Mary Ann; Hill, Pamela D

2010-01-01

Nurse retention is a different way of conceptualizing the employer-employee relationship when compared with turnover. Job embeddedness (JE), a construct based on retention, represents the sum of reasons why employees remain at their jobs. However, JE has not been investigated in relation to locale (urban or rural) or exclusively with a sample of registered nurses (RNs). The purpose of this study was to determine what factors (JE, age, gender, locale, and income) help predict nurse retention. A cross-sectional mailed survey design was used with RNs in different locales (urban or rural). Job embeddedness was measured by the score on the composite, standardized instrument. Nurse retention was measured by self-report items concerning intent to stay. A response rate of 49.3% was obtained. The typical respondent was female (96.1%), white, non-Hispanic (87.4%), and married (74.9%). Age and JE were predictive of nurse retention and accounted for 26% of the explained variance in intent to stay. Although age was a significant predictor of intent to stay, it accounted for only 1.4% of the variance while JE accounted for 24.6% of the variance of nurse retention (as measured by intent to stay). Older, more "embedded" nurses are more likely to remain employed in their current organization. Based on these findings, JE may form the basis for the development of an effective nurse retention program.

Calculation of retention time tolerance windows with absolute confidence from shared liquid chromatographic retention data.

Science.gov (United States)

Boswell, Paul G; Abate-Pella, Daniel; Hewitt, Joshua T

2015-09-18

Compound identification by liquid chromatography-mass spectrometry (LC-MS) is a tedious process, mainly because authentic standards must be run on a user's system to be able to confidently reject a potential identity from its retention time and mass spectral properties. Instead, it would be preferable to use shared retention time/index data to narrow down the identity, but shared data cannot be used to reject candidates with an absolute level of confidence because the data are strongly affected by differences between HPLC systems and experimental conditions. However, a technique called "retention projection" was recently shown to account for many of the differences. In this manuscript, we discuss an approach to calculate appropriate retention time tolerance windows for projected retention times, potentially making it possible to exclude candidates with an absolute level of confidence, without needing to have authentic standards of each candidate on hand. In a range of multi-segment gradients and flow rates run among seven different labs, the new approach calculated tolerance windows that were significantly more appropriate for each retention projection than global tolerance windows calculated for retention projections or linear retention indices. Though there were still some small differences between the labs that evidently were not taken into account, the calculated tolerance windows only needed to be relaxed by 50% to make them appropriate for all labs. Even then, 42% of the tolerance windows calculated in this study without standards were narrower than those required by WADA for positive identification, where standards must be run contemporaneously. Copyright © 2015 Elsevier B.V. All rights reserved.

Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature

International Nuclear Information System (INIS)

Thiéry, Vincent; Bourdot, Alexandra; Bulteel, David

2015-01-01

The Toarcian Posidonia shale from Dotternhausen, Germany, is quarried and burnt in a fluidized bed reactor to produce electricity. The combustion residue, namely burnt oil shale (BOS), is used in the adjacent cement work as an additive in blended cements. The starting material is a typical laminated oil shale with an organic matter content ranging from 6 to 18%. Mineral matter consists principally of quartz, feldspar, pyrite and clays. After calcination in the range, the resulting product, burnt oil shale, keeps the macroscopic layered texture however with different mineralogy (anhydrite, lime, iron oxides) and the formation of an amorphous phase. This one, studied under STEM, reveals a typical texture of incipient partial melting due to a long retention time (ca. 30 min) and quenching. An in-situ high temperature X-ray diffraction (HTXRD) allowed studying precisely the mineralogical changes associated with the temperature increase. - Highlights: • We present oil shale/burnt oil shale characterization. • The Posidonia Shale is burnt in a fluidized bed. • Mineralogical evolution with temperature is complex. • The burnt oil shale is used in composite cements

Production of methyl ester from oil in the wastewater pond of a palm oil factory

Directory of Open Access Journals (Sweden)

Tongurai, C.

2007-11-01

Full Text Available This research studied the suitable technique for the production of methyl ester from waste palm oil in the water pond of a palm oil mill. The composition of the waste palm oil was 73.82% fatty acid, 5.07% triglyceride, 3.39% diglyceride and 17.76% unknown compounds. The unknown compounds were separated via simple distillation carried out at a temperature range of 300-350oC.First, the experiments were carried out in screw capped bottles using filtrated as-received waste oil as the reactant. The esterification and transesterification process were conducted using sulfuric acid catalyst in a methanol solution. The key parameters studied were mole ratio of waste oil to methanol (1:1 to 1:72, amount of catalyst from 0.1-20 v/w% of the reactant, temperature range of 60-98oC and reaction time range of 15-180 minutes. Thin Layer Chromatography (TLC analysis showed 85-90% purity of methyl ester with 4-5% of mono-, di-, and triglycerides and fatty acids and about 5-10% of the unknown compounds for the best condition. The resulting yield of biodiesel was 84-88%. Eradication of contaminants by distillation gave about a 75% distillate yield. Distilled waste palm oil was esterified and transesterified using the previous optimum condition of as-received waste oil, but the reaction time and temperature were varied. The optimal result was obtained by using distilled waste palm oil to methanol molar ratio of 1:8, sulfuric acid of 1 v/w% of reactant, reaction temperature of 70oC and reaction time of 1 hour. TLC analysis indicated a biodiesel composition of methyl ester, free fatty acid, diglyceride and monoglyceride of 96.39%, 3.20%, 0.24% and 0.17%, respectively. The yield of biodiesel was 96-98% having physical fuel properties according to Thailand standard for methyl esterFinally, the distilled waste palm oil was esterified using a 3 liters continuous stirred-tank reactor (CSTR. Using the suitable condition for the batch process and an hour retention time, the

Tracking juniper berry content in oils and distillates by spectral deconvolution of gas chromatography/mass spectrometry data.

Science.gov (United States)

Robbat, Albert; Kowalsick, Amanda; Howell, Jessalin

2011-08-12

The complex nature of botanicals and essential oils makes it difficult to identify all of the constituents by gas chromatography/mass spectrometry (GC/MS) alone. In this paper, automated sequential, multidimensional gas chromatography/mass spectrometry (GC-GC/MS) was used to obtain a matrix-specific, retention time/mass spectrometry library of 190 juniper berry oil compounds. GC/MS analysis on stationary phases with different polarities confirmed the identities of each compound when spectral deconvolution software was used to analyze the oil. Also analyzed were distillates of juniper berry and its oil as well as gin from four different manufacturers. Findings showed the chemical content of juniper berry can be traced from starting material to final product and can be used to authenticate and differentiate brands. Copyright © 2011 Elsevier B.V. All rights reserved.

Heavy-oil recovery in naturally fractured reservoirs with varying wettability by steam solvent co-injection

Energy Technology Data Exchange (ETDEWEB)

Al Bahlani, A. [Alberta Univ., Edmonton, AB (Canada); Babadagli, T. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Alberta Univ., Edmonton, AB (Canada)

2008-10-15

Steam injection may not be an efficient oil recovery process in certain circumstances, such as in deep reservoirs, where steam injection may be ineffective because of hot-water flooding due to excessive heat loss. Steam injection may also be ineffective in oil-wet fractured carbonates, where steam channels through fracture zones without effectively sweeping the matrix oil. Steam flooding is one of the many solutions for heavy oil recovery in unconsolidated sandstones that is in commercial production. However, heavy-oil fractured carbonates are more challenging, where the recovery is generally limited only to matrix oil drainage gravity due to unfavorable wettability or thermal expansion if heat is introduced during the process. This paper proposed a new approach to improve steam/hot-water injection and efficiency for heavy-oil fractured carbonate reservoirs. The paper provided background information on oil recovery from fractured carbonates and provided a statement of the problem. Three phases were described, including steam/hot-waterflooding phase (spontaneous imbibition); miscible flooding phase (diffusion); and steam/hot-waterflooding phase (spontaneous imbibition or solvent retention). The paper also discussed core preparation and saturation procedures. It was concluded that efficient oil recovery is possible using alternate injection of steam/hot water and solvent. 43 refs., 1 tab., 13 figs.

Urinary retention in women

African Journals Online (AJOL)

Urinary retention in women. Urinary retention in women is often transient and of no known cause. ... stones, constipation, urethral cancer, uterine fibroids ... present with abnormal bladder function secondary to ... (CT), magnetic resonance imaging (MRI) or myelography ... full blood count, urea, electrolytes and creatinine can ...

El boom, Barral y Barcelona : gestación editorial de un movimiento transoceánico

OpenAIRE

Ruiz Ortega, José Luis

2014-01-01

En los años sesenta la pequeña editorial barcelonesa de Carlos Barral brindó al peruano Vargas Llosa la posibilidad de publicar su primera novela. Desde entonces, el editor Barral se convierte en el promotor principal del surgimiento y desarrollo del boom latinoamericano y, por consiguiente, en pieza clave para el fortalecimiento de las relaciones editoriales y literarias entre América Latina y España. In the 1960s Carlos Barral's small publishing house in Barcelona affords the Peruvian Va...

Metal-ion retention properties of water-soluble amphiphilic block copolymer in double emulsion systems (w/o/w) stabilized by non-ionic surfactants.

Science.gov (United States)

Palencia, Manuel; Rivas, Bernabé L

2011-11-15

Metal-ion retention properties of water-soluble amphiphilic polymers in presence of double emulsion were studied by diafiltration. Double emulsion systems, water-in-oil-in-water, with a pH gradient between external and internal aqueous phases were prepared. A poly(styrene-co-maleic anhydride) (PSAM) solution at pH 6.0 was added to the external aqueous phase of double emulsion and by application of pressure a divalent metal-ion stream was continuously added. Metal-ions used were Cu(2+) and Cd(2+) at the same pH of polymer solution. According to our results, metal-ion retention is mainly the result of polymer-metal interaction. Interaction between PSMA and reverse emulsion globules is strongly controlled by amount of metal-ions added in the external aqueous phase. In addition, as metal-ion concentration was increased, a negative effect on polymer retention capacity and promotion of flocculation phenomena were produced. Copyright © 2011 Elsevier Inc. All rights reserved.

INCREASED OIL RECOVERY FROM MATURE OIL FIELDS USING GELLED POLYMER TREATMENTS

Energy Technology Data Exchange (ETDEWEB)

G.P. Willhite; D.W. Green; C.S. McCool

2003-05-01

Gelled polymer treatments are applied to oil reservoirs to increase oil production and to reduce water production by altering the fluid movement within the reservoir. This report describes the results of a three-year research program aimed at reducing barriers to the widespread use of gelled polymer treatments by (1) developing methods to predict gel behavior during placement in matrix rock and fractures, (2) determining the persistence of permeability reduction after gel placement, and (3) developing methods to design production well treatments to control water production. The work focused on the gel system composed of polyacrylamide and chromium acetate. The molar mass of the polymer was about six million. Chromium(III) acetate reacted and formed crosslinks between polymer molecules. The crosslinked polymer molecules, or pre-gel aggregates, combine and grow to eventually form a 3-dimensional gel. A fundamental study to characterize the formation and growth of pre-gel aggregates was conducted. Two methods, flow field-flow fractionation (FFFF) and multi-angle laser light scattering (MALLS) were used. Studies using FFFF were inconclusive. Data taken using MALLS showed that at the gel time the average molar mass of gel aggregates increased by a factor of about three while the average size increase was approximately 50%. Increased acetate concentration in the gelant increases the gel time. The in situ performance of an added-acetate system was investigated to determine the applicability for in-depth treatments. Increased acetate concentrations delayed the development of increased flow resistance during gelant injection in short sandpacks. The development of increased flow resistance (in situ gelation) was extended from 2 to 34 days by increasing the acetate-to-chromium ratio from 38 to 153. In situ gelation occurred at a time that was approximately 22% of the bulk gelation time. When carbonate rocks are treated with gel, chromium retention in the rock may limit in

Optical MEMS: boom, bust and beyond

Science.gov (United States)

Ramani, Chandra Mouli

2005-10-01

Optical Telecommunications bandwidth, spurred by the growth of the internet, experienced unprecedented growth in the late 1990's. The creation of new enterprises was vast and the expansion of established component, system and services companies was also breathtaking. This period of speculative growth was followed in 2001-2004 by one of the most significant market crashes in history. While $20B of venture capital was invested in optical telecom in the last 10 years, the vast majority of that has been written off in the last four. Countless start-ups inaugurated with great fanfare at the end of the 20th century were unceremoniously shut down at the start of the 21st. (1) As in all speculative bubbles, innovative technologies were born and buried. Nonetheless, new capabilities emerge from the chaos and disruption; one such example is the advent of Optical MEMS (MOEMS). Its development was vigorously pursued in both academic and corporate laboratories during the boom and, in the author's view; MOEMS constitutes a powerful and versatile tool set that is an invaluable residual of the last few years. In Telecommunications, MOEMS has proven to be the technology of choice for many optical switching and wavelength management applications. (2) Variable Optical Attenuators (VOA), Wavelength Blockers (WB), Dynamic Gain Equalizers (DGE), and most recently Wavelength Selective Switches (WSS) are being used in the numerous recent network deployments. Moreover, agile networks of the future will have MOEMS at every node. This presentation will provide an overview of the history of MOEMS in Telecommunications, discuss its byproducts and project the future of the technology.

Developments in modelling of thermohydro-geomechanical behaviour of Boom clay and clay-based buffer materials (Volume 1)

International Nuclear Information System (INIS)

Baldi, G.; Hueckel, T.; Peano, A.; Pellegrini, R.

1991-01-01

The results of two years of research on thermomechanics of clays performed within CEC contract Fl1W/0150 are described herein. Previous studies (research contracts with CEC/WAS/380.83.7 l) performed by ISMES have evidenced the need for an improved modelling of the volumetric response of natural clays. In a coupled approach, this leads to an improved prediction of pore-pressure development and dissipation. This is crucial for assessing conditions of a possible local thermal failure as verified in laboratory tests done at ISMES. The first part of the study lays the foundations of a comprehensive theoretical treatment of the interaction between water and soil skeleton. It consists in: (a) developing a framework for inclusion of water/soil particle thermally induced interaction into a thermodynamically consistent mixture theory approach (Section 2); (b) studying possible modelling approaches of considering the effective thermal expansion coefficient of pore water dependency on pore water status (Section 2); (c) testing artificial clays to assess pore water thermal expansion dependence on temperature in the presence of different amounts of active clay minerals and also Boom clay (Section 3); (d) performing a laboratory test campaign on Boom clay with special attention to the response in the overconsolidated domain (Section 4). 89 figs., 18 tabs., 102 refs

76 FR 24089 - Credit Risk Retention

Science.gov (United States)

2011-04-29

... 17 CFR Part 246 Department of Housing and Urban Development 24 CFR Part 267 Credit Risk Retention... 2501-AD53 Credit Risk Retention AGENCIES: Office of the Comptroller of the Currency, Treasury (OCC..., Commission, FHFA, and HUD (the Agencies) are proposing rules to implement the credit risk retention...

Retention capacity of correlated surfaces.

Science.gov (United States)

Schrenk, K J; Araújo, N A M; Ziff, R M; Herrmann, H J

2014-06-01

We extend the water retention model [C. L. Knecht et al., Phys. Rev. Lett. 108, 045703 (2012)] to correlated random surfaces. We find that the retention capacity of discrete random landscapes is strongly affected by spatial correlations among the heights. This phenomenon is related to the emergence of power-law scaling in the lake volume distribution. We also solve the uncorrelated case exactly for a small lattice and present bounds on the retention of uncorrelated landscapes.

Retention capacity of correlated surfaces

OpenAIRE

Schrenk, K. J.; Araújo, N. A. M.; Ziff, R. M.; Herrmann, H. J.

2014-01-01

We extend the water retention model [C. L. Knecht et al., Phys. Rev. Lett. 108, 045703 (2012)] to correlated random surfaces. We find that the retention capacity of discrete random landscapes is strongly affected by spatial correlations among the heights. This phenomenon is related to the emergence of power-law scaling in the lake volume distribution. We also solve the uncorrelated case exactly for a small lattice and present bounds on the retention of uncorrelated landscapes.

A Holistic Assessment of Energy Production: Environmental, Economic, and Social Impacts of Hydraulic Fracturing in Williams County, North Dakota

Science.gov (United States)

Jagdeo, J.; Ravikumar, A. P.; Grubert, E.; Brandt, A. R.

2016-12-01

Unconventional oil and natural gas production in the U.S. has increased tenfold between 2005 and 2014 due to advances in hydraulic fracturing technology. Prior studies of hydraulic fracturing activity have mainly focused on two themes: the environmental impacts related to air and water pollution or the direct and spillover economic benefits resulting from oil booms at the state and local level. However, the impacts of hydraulic fracturing extend beyond these effects. Oil-boom counties have experienced environmental changes in land-use and water supply and witnessed social changes in demographics, crime, and health, factors that are not typically evaluated in regard to hydraulic fracturing. Hence, there is a need to consider the holistic effects of oil production on communities. This study examines the environmental, economic, and social impacts of oil and gas activity in Williams County, North Dakota by comparing its pre-boom ( 2005) and post-boom ( 2014) conditions. Annual oil production in Williams County increased from 3.4 million barrels in 2005 to 56 million barrels in 2014, providing an ideal test-case to study the impact of energy development on surrounding communities. We compared changes in multiple impact categories, attributed directly or indirectly to hydraulic fracturing activity, to trends at the national level. For example, between 2005 and 2014, CO2 and CH4 emissions primarily from oil and gas activity increased by 360 thousand metric tons CO2e, corresponding to a 20-fold increase. Concurrently, national emissions decreased by 10.5%. Over twenty indicators were analyzed across environmental, social and economic impact categories, including land-use change, median household income, and crime rates. The datasets were normalized using federal regulations for upper and lower bounds, or calibrated against national averages. Normalized indicators are then aggregated to provide a single-value `impact-factor'. Such `impact-factor' maps will provide a

Chemical composition of sage (Salvia officinalis L. essential oil from the Rio de Janeiro State (Brazil

Directory of Open Access Journals (Sweden)

A. Porte

2013-01-01

Full Text Available The purpose of this study was to investigate the chemical composition of the essential oil from fresh leaves of sage (Salvia officinalis L. from Petrópolis, Rio de Janeiro State, for international trade. The oil was isolated by hydrodistillation in a Clevenger-type apparatus and analyzed through a combination of GC-FID and GC-MS. The yield was 2.3 % on dry basis. Forty-seven constituents were identified according to their chromatographic retention indices and mass spectra, corresponding to 94.90 % of the compounds present. The major constituents of the oil were α-thujone (40.90 %, camphor (26.12 %, α-pinene (5.85 % and β-thujone (5.62 %. The essential oil studied was similar to those found in several European countries and can be a valuable product for the small farmers from the Petrópolis region in Rio de Janeiro State.

Which are tomorrow's stakes for oil distribution?

International Nuclear Information System (INIS)

Bousson, Guillaume; Dooh-Priso, Anne

2014-09-01

After an evocation of the evolution of the oil distribution sector, this Power Point presentation reports a study which, while focusing on oil product marketing and associated services for light vehicles and road transports, aimed at identifying which are the main strategies adopted by dealers, how this supply will evolve, and what are user's expectations. The authors locate oil distribution within the value chain, gives an overview of differences of prices at the pump. Then, they analyse the evolution (between decline and evolution) of distribution in developed countries: an always more constraining context (from political, economic, social-cultural, technological, environmental, and legal points of view), three main types of actors (oil companies, independent dealers, mass retailers), a decrease of consumption, fewer traditional service stations, increasing share for food mass retailers, evolution of strategy of majors (upstream or discount). The next part comments the progressive opening of distribution in developing countries: same kind of constraints, situation in China (first world oil importer), in India (towards a deregulated market), in other Asian countries where foreign companies are hardly present, in Africa where national companies are replacing major companies, in South America where some local actors prevail. In the next part, the authors outline that substitution products (bio-fuels, LPG, NGV, charging stations for electric vehicles) hardly convince. Finally, it is shown that consumer retention strategy is more particularly based on digital tools and applications

Preventing the Dutch Disease: The case of Indonesia

International Nuclear Information System (INIS)

Ramli, R.

1992-01-01

Indonesia has been more successful than other oil exporters in mitigating the effects of the Dutch Disease, the decline in non-oil production associated with an oil boom. Typically sharp increases in oil revenues promote the accumulation of international reserves, increasing monetization, and raising prices of non-traded relative to traded goods. The latter causes contraction of output and employment in the traded sector. This study analyzes the magnitude of the boom and its fiscal, monetary, and production effects. Proxies of the real exchange rate, defined as the relative price of traded to non-traded goods, were constructed. The effect of the exchange rate on the Dutch Disease problems were examined. The movement of the real exchange rate and the remarkable growth of production of traded goods indicate that the effects of the Dutch Disease on the Indonesian economy were remarkably limited. Structural and policy-induced factors, such as exchange rate protection and micro interventions, that mitigated the anticipated effects of the Dutch Disease are examined

Uncovering client retention antecedents in service organizations

Directory of Open Access Journals (Sweden)

Mari Jansen van Rensburg

2014-01-01

Full Text Available This paper develops a multi-dimensional model of retention to provide a more complete and integrated view of client retention and its determinants in service contexts. To uncover the antecedents of client retention, social and economic exchanges were reviewed under the fundamental ideas of the Social Exchange Theory. Findings from a survey of senior South African advertising executives suggest that client retention is the result of evaluative as well as relational factors that can influence client responses. Despite contractual obligations, advertisers are willing to pay the costs and make the sacrifices of switching should their expectations be unmet. An important contribution of this study is the use of multi-item scales to measure retention. The model developed provides valuable insight to agencies on client retention management and the optimal allocation of resources for maximum customer equity. This model may also be applied to other service organisations to provide insight to client retention.

chemo-Hydro-mechanical modelling of in-situ disposal of a bituminized radioactive waste in boom clay

International Nuclear Information System (INIS)

Mokni, N.; Olivella, S.; Valcke, E.; Marien, A.; Smets, S.; Li, X.; Sillen, X.

2012-01-01

Document available in extended abstract form only. The current reference solution of the Belgian Agency for the Management of Radioactive Waste and Fissile Materials (ONDRAF/NIRAS) envisages underground disposal of Eurobitum Bituminized radioactive Waste (BW) in a geologically stable clay formation. In Belgium, the Boom Clay, which is a 30 to 35 million years old and ∼100 m thick marine sediment is being studied as a potential host formation because of its favorable properties to limit and delay the migration of the leached radionuclides to the biosphere over extended periods of time. The current disposal concept foresees that several drums (220 litres) of Eurobitum would be grouped in thick-walled cement-based secondary containers, which in turn would be placed in concrete-lined disposal galleries that are excavated at mid-depth in the clay layer. Only 80-90 % of the total volume of the drum is filled with Eurobitum.The remaining voids between the containers would be backfilled with a cement-based material. The interaction between the BW and the host clay formation is a very complicated chemo-hydro-mechanical process and depends not only on the hydro-mechanical behaviour of the Boom Clay itself, but also on that of the BW. In fact, the osmosis-induced uptake of water by the dehydrated hygroscopic salts embedded in the waste induces a geo-mechanical perturbation of the host formation, caused by the swelling and the increase of the pressure in and around the waste. The objectives of the Chemo-Hydro-Chemical (CHM) analysis presented in this work are (i) to get insights on the kinetics of water uptake by BW, dissolution of the embedded NaNO 3 crystals, solute leaching, and maximum generated pressure under disposal conditions and (ii) to study the stress redistribution due to the recompression of the clay around a gallery caused by the swelling pressure of the bitumen and the admissible swelling pressure for Boom clay. Firstly, a CHM formulation of chemically and

Analysis of the essential oils of Alpiniae Officinarum Hance in different extraction methods

Science.gov (United States)

Yuan, Y.; Lin, L. J.; Huang, X. B.; Li, J. H.

2017-09-01

It was developed for the analysis of the essential oils of Alpiniae Officinarum Hance extracted by steam distillation (SD), ultrasonic assisted solvent extraction (UAE) and supercritical fluid extraction (SFE) via gas chromatography mass spectrometry (GC-MS) combined with retention index (RI) method. There were multiple volatile components of the oils extracted by the three above-mention methods respectively identified; meanwhile, each one was quantified by area normalization method. The results indicated that the content of 1,8-Cineole, the index constituent, by SD was similar as SFE, and higher than UAE. Although UAE was less time consuming and consumed less energy, the oil quality was poorer due to the use of organic solvents was hard to degrade. In addition, some constituents could be obtained by SFE but could not by SD. In conclusion, essential oil of different extraction methods from the same batch of materials had been proved broadly similarly, however, there were some differences in composition and component ratio. Therefore, development and utilization of different extraction methods must be selected according to the functional requirements of products.

Applications in the oil sands industry for Particlear{sup R} silica microgel

Energy Technology Data Exchange (ETDEWEB)

Moffett, B. [DuPont Chemical Solutions Enterprise, Wilmington, DE (United States)

2009-07-01

This presentation demonstrated the use of Particlear{sup R} silica microgel in the oil sands industry. The silica-based coagulant is an amorphous silicon dioxide microgel solution. The surface area of a football field can be obtained using 2.7 grams of the substance. The coagulation mechanism is achieved by charge neutralization and inter-particle bridging. The microgel is manufactured at the point of use from commodity chemicals, water, and carbon dioxide (CO{sub 2}). Applications for the microgel include potable water treatment, paper retention, and animal processing wastewater. In the oil sands industry, Particlear{sup R} can be used in tailings flocculation, thickened tailings drying, steam assisted gravity drainage (SAGD) water treatment, and enhanced bitumen recovery. It was concluded that the microgel can be used in many oil sands processing and liquid-solid separation processes in order to remove dissolved solids and organics and increase the rate of solids dewatering. tabs., figs.

Retention of Emergency Care Knowledge.

Science.gov (United States)

Burckes, Mardie E.; Shao, Kung Ping Pam

1984-01-01

Data on the emergency care knowledge of college students were measured by a pretest, posttest, and retention test. A high relationship was found between students' posttest scores and retention test scores. Findings are discussed. (Author/DF)

Analysis of Offshore Knuckle Boom Crane - Part One: Modeling and Parameter Identification

Directory of Open Access Journals (Sweden)

Morten K. Bak

2013-10-01

Full Text Available This paper presents an extensive model of a knuckle boom crane used for pipe handling on offshore drilling rigs. The mechanical system is modeled as a multi-body system and includes the structural flexibility and damping. The motion control system model includes the main components of the crane's electro-hydraulic actuation system. For this a novel black-box model for counterbalance valves is presented, which uses two different pressure ratios to compute the flow through the valve. Experimental data and parameter identification, based on both numerical optimization and manual tuning, are used to verify the crane model. The demonstrated modeling and parameter identification techniques target the system engineer and takes into account the limited access to component data normally encountered by engineers working with design of hydraulic systems.

Study of the Boom clay layer as a geochemical barrier for long-lived radionuclides

International Nuclear Information System (INIS)

Baetsle, L.H.; Henrion, P.; Put, M.; Cremers, A.

1985-01-01

The Boom clay layer below the nuclear site of Mol, Belgium has been thoroughly investigated on its geohydrologic and physicochemical characteristics as well as by laboratory experiments and in situ tests in the underground laboratory. Hydraulic permeabilities have been measured in situ; the chemical composition of the interstitial clay water is related to the mineralogical composition. Radionuclide sorption data and sorption mechanisms are given for Cs, Sr, Eu, Tc, Am, Pu and Np; experimental diffusion coefficients were determined by clay plug migration tests in representative conditions. Results of model calculations for the migration of radionuclides in dense porous media are given for Cs, Sr, Pu and Np

Le boom du raffinage en Asie du Sud-Est Refinery Boom in Southeast Asia

Directory of Open Access Journals (Sweden)

Gruson J. F.

2006-11-01

Full Text Available Le marché pétrolier connaît en Asie un développement rapide, principalement dans la zone non OCDE, qui représente aujourd'hui plus de 15 % de la consommation pétrolière mondiale. La croissance économique attendue dans ces pays devrait porter cette part à plus de 25 % d'ici 2010, soit une hausse de la demande de 5,4% par an, principalement dans le secteur des transports. Les investissements qui en découlent pour l'industrie du raffinage régionale sont très élevés (des évaluations les chiffrent à près de 140 milliards de dollars, d'autant plus que la protection de l'environnement commence à prendre une importance significative. Dès lors, le défit majeur de ces pays sera d'assurer les financements nécessaires pour augmenter la capacité de raffinage (un quasi-doublement et l'adapter au poids croissant de l'essence et des distillats moyens dans la demande. La participation d'opérateurs privés apparaît essentielle, mais dépendra fortement du redressement des marges de raffinage et de la réalité de l'ouverture des marchés pétroliers nationaux annoncée par les pouvoirs publics. The Asia demand for oil is increasing dramatically, particularly in the non OECD countries, which represent, today more than 15% of the word oil market. The expected economic growth in these areas should contribute to a rise in oil demand by about 5. 4 per year and hence to a significant increase of this share to 25% in 2010; virtually a large part of this evolution will come from the transportation sector. The proceeding investments of the regional, refining industry are very high (some evaluations come to around 140 billions of dollars, all the more the protection of the environment takes an increasing significant place. Accordingly the most important challenge to be taken up by these countries will be to mobilize long term fundings to develop and adapt the capabilities of the refineries to meet the growth of gasoline and gasoil demand. The

33 CFR 155.1130 - Requirements for prepositioned response equipment.

Science.gov (United States)

2010-07-01

... HOMELAND SECURITY (CONTINUED) POLLUTION OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR... sorbents; (3) Sorbents including booms, sweeps, pads, blankets, drums and plastic bags; (4) Personnel...

Revising the potential of large-scale Jatropha oil production in Tanzania: An economic land evaluation assessment

International Nuclear Information System (INIS)

Segerstedt, Anna; Bobert, Jans

2013-01-01

Following up the rather sobering results of the biofuels boom in Tanzania, we analyze the preconditions that would make large-scale oil production from the feedstock Jatropha curcas viable. We do this by employing an economic land evaluation approach; first, we estimate the physical land suitability and the necessary inputs to reach certain amounts of yields. Subsequently, we estimate costs and benefits for different input-output levels. Finally, to incorporate the increased awareness of sustainability in the export sector, we introduce also certification criteria. Using data from an experimental farm in Kilosa, we find that high yields are crucial for the economic feasibility and that they can only be obtained on good soils at high input rates. Costs of compliance with certification criteria depend on site specific characteristics such as land suitability and precipitation. In general, both domestic production and (certified) exports are too expensive to be able to compete with conventional diesel/rapeseed oil from the EU. Even though the crop may have potential for large scale production as a niche product, there is still a lot of risk involved and more experimental research is needed. - Highlights: ► We use an economic land evaluation analysis to reassess the potential of large-scale Jatropha oil. ► High yields are possible only at high input rates and for good soil qualities. ► Production costs are still too high to break even on the domestic and export market. ► More research is needed to stabilize yields and improve the oil content. ► Focus should be on broadening our knowledge-base rather than promoting new Jatropha investments

Influence of Hydraulic Retention Time on Biogas Production from Frozen Seafood Wastewater using Decanter Cake as Anaerobic Co-digestion Material

OpenAIRE

Thaniya Kaosol; Narumol Sohgrathok

2012-01-01

In this research, an anaerobic co-digestion using decanter cake from palm oil mill industry to improve the biogas production from frozen seafood wastewater is studied using Continuously Stirred Tank Reactor (CSTR) process. The experiments were conducted in laboratory-scale. The suitable Hydraulic Retention Time (HRT) was observed in CSTR experiments with 24 hours of mixing time using the mechanical mixer. The HRT of CSTR process impacts on the efficiency of biogas production. The best perform...

Organic matter linked radionuclide transport in Boom clay - Phenomenological understanding and abstraction to PA

International Nuclear Information System (INIS)

Maes, N.; Bruggeman, C.; Liu, D.J.; Salah, S.; Van Laer, L.; Wang, L.; Weetjens, E.; Govaerts, J.; Marivoet, J.; Brassinnes, S.

2012-01-01

Document available in extended abstract form only. In the frame of the Belgian research program on long term management of high-level and/or long-lived radioactive wastes coordinated by ONDRAF/NIRAS, plastic clays (i.e., Boom Clay and Ypresian clays) are investigated for their potential to host a deep geological disposal repository for radioactive waste because of, among others, their ability to significantly retard radionuclide releases to the biosphere. The Boom Clay is characterised by the presence of a relatively high amount of dissolved organic matter (DOM, humic substances) which show a strong interaction with a suite of radionuclides (RN) like lanthanides, actinides and transition metals. This interaction with DOM leads in general to an increased mobility of the radionuclide as the OM can act as a colloidal carrier for the radionuclide. Therefore, the quantification and the understanding of the underlying processes are needed for the demonstration of confidence in the host formation to act as a suitable barrier. However, this is not an easy task, given the multitude of processes involved: complexation/colloid formation, sorption, kinetics, filtration, -. In this presentation, we will provide an overview of the research work that leads to a straightforward reactive transport model capturing fairly well the experimental observations. The model can be considered as an intermediate model providing a good basis for further safety abstraction on the one hand and the way to a more detailed phenomenological understanding on the other hand. The research is focussed on the underlying processes that govern speciation, sorption and transport. These underlying processes are investigated in a bottom-up approach, from simple systems to more complex systems. Interpretation is done using thermodynamic based models. Whereas the contribution of Bruggeman et al. focusses mainly on (batch) sorption studies (of trivalent RN), this presentation will provide more details on the

Oil characterisation: assessment of composition, risks, degradation and remediation potential of total petroleum hydrocarbons in soil

International Nuclear Information System (INIS)

Lookman, R.; Vanermen, G.; Van De Weghe, H.; Gemoets, J.; Van der Sterren, G.; Alphenaar, A.

2005-01-01

Several methods are available for the characterization of petroleum hydrocarbons. The TPHCWG (Total Petroleum Hydrocarbon Criteria Working Group) developed a method based on a silica column separation of aromatics and aliphatics and a GC-FID subdivision into equivalent-carbon fractions (EC) ('TPH-method'). This method was mainly developed for assessing human risks of oil compounds. Within NOBIS (Dutch Research program Biological In-situ Remediation), another method was developed based upon an equilibrium-experiment of the oil-polluted soil with water (column recirculation), which was further developed by TTE ('TTE-method'). This method uses measured water solubilities of individual oil components and GC-retention times yielding a subdivision of the hydrocarbons into compound classes that are relevant for assessing the remediation potential of the specific oil pollution. In this paper we present results of a research project in which we developed a new method, the 'OK-method' that combines these two procedures and allows a complete characterisation of the oil in terms of composition, (human) risks, volatility, solubility, plume behaviour (migration velocities of the soluble components) and aerobic degradation potential. (authors)

N-3 fatty acids reduced trans fatty acids retention and increased docosahexaenoic acid levels in the brain.

Science.gov (United States)

Lavandera, Jimena Verónica; Saín, Juliana; Fariña, Ana Clara; Bernal, Claudio Adrián; González, Marcela Aída

2017-09-01

The levels of docosahexaenoic acid (DHA, 22:6n-3) and arachidonic acid (AA, 20:4n-6) are critical for the normal structure and function of the brain. Trans fatty acids (TFA) and the source of the dietary fatty acids (FA) interfere with long-chain polyunsaturated fatty acids (LC-PUFA) biosynthesis. The aim of this study was to investigate the effect of TFA supplementation in diets containing different proportions of n-9, n-6, and n-3 FA on the brain FA profile, including the retention of TFA, LC-PUFA levels, and n-6/n-3 PUFA ratios. These parameters were also investigated in the liver, considering that LC-PUFA are mainly bioconverted from their dietary precursors in this tissue and transported by serum to the brain. Also, stearoyl-CoA desaturase-1 (SCD1) and sterol regulatory element-binding protein-1c (SREBP-1c) gene expressions were evaluated. Male CF1 mice were fed (16 weeks) diets containing different oils (olive, corn, and rapeseed) with distinct proportions of n-9, n-6, and n-3 FA (55.2/17.2/0.7, 32.0/51.3/0.9, and 61.1/18.4/8.6), respectively, substituted or not with 0.75% of TFA. FA composition of the brain, liver, and serum was assessed by gas chromatography. TFA were incorporated into, and therefore retained in the brain, liver, and serum. However, the magnitude of retention was dependent on the tissue and type of isomer. In the brain, total TFA retention was lower than 1% in all diets. Dietary n-3 PUFA decreased TFA retention and increased DHA accretion in the brain. The results underscore the importance of the type of dietary FA on the retention of TFA in the brain and also on the changes of the FA profile.

On the optimal design of risk retention in securitisation

Directory of Open Access Journals (Sweden)

Metin Kaptan

2011-09-01

Full Text Available This paper examines the optimal design of retention in securitisation, in order to maximize welfare of screening per unit of retention, assuming that screening is costly and that the bank intends to securitise its loans. In contrast to the focus of previous literature on tranche retention, we deviate from the constitutional mechanisms of tranche retention to present a pareto-optimal method of tranche retention. Unlike the current ad-hoc-regulations, we derive the optimal design of retention from a utility maximization problem. We show that the level of retention per tranche should be dependent on the rate of credit default, i.e. the higher the rate of default, the higher the optimal rate of retention required to provide an incentive to screen carefully. From this approach, it follows that the rate of retention per tranche should be higher, the higher the position within the ranking order of subordination. Accordingly, the efficiency of tranche retention can be enhanced, reducing the level of retention required to maintain a given level of screening-effort. This retention design entails a recovery of the bank’s equity capital, thereby increasing liquidity and lending capacities.

Transesterification of jojoba oil, sunflower oil, neem oil, rocket seed oil and linseed oil by tin catalysts

International Nuclear Information System (INIS)

Shah, Mazloom; Tariq, Muhammad; Ali, Saqib; Guo, Qing-Xiang; Fu, Yao

2014-01-01

The methanolysis of jojoba oil has been studied in the presence of tin powder, dibutyltin diacetate (C 4 H 9 ) 2 Sn(OOCCH 3 ) 2 , dioctyltin diacetate (C 8 H 17 ) 2 Sn(OOCCH 3 ) 2 , dibutyltin oxide (C 4 H 9 ) 2 SnO, dioctyltin oxide (C 8 H 17 ) 2 SnO, diphenyltin oxide (C 6 H 5 ) 2 SnO, dibutyltin chloride dihydroxide (C 4 H 9 ) 2 Sn(OH) 2 Cl, butyltinhydroxide hydrate (C 4 H 9 )Sn(=O)OH.xH 2 O, Ni nanoparticles and Pd nanoparticles act as catalysts. Among these, 1 weight % of dibutyltin diacetate shows the maximum conversion. Then, methanolysis of sunflower oil, neem oil, rocket seed oil and linseed oil into methyl esters studied in the presence of 1% dibutyltin diacetate as a catalyst and was compared their percentage conversions. The experimental yield for the conversion of jojoba oil, sunflower oil, neem oil, rocket seed oil and linseed oil into biodiesel was found to be 71%, 51%, 50.78%, 40.90% and 39.66%, respectively. The experimental yield of the conversion of jojoba oil into methyl esters was found to be increased up to 96% by increasing reaction time, without emulsion formation. The synthesis of jojoba seed oil biodiesel (JSOB), soybean oil biodiesel (SOB), neem oil biodiesel (NOB), rocket seed oil biodiesel (RSOB) and linseed oil biodiesel (LSOB) was confirmed by NMR ( 1 H and 13 C) and FT-IR analyses of biodiesel. - Highlights: • Transesterification of jojoba oil into biodiesel by tin and nano catalysts. • 1 weight % dibutyltin diacetate showed highest yield at 60 °C. • Catalytic conversion comparison of five oils using dibutyltin diacetate • The experimental yield of the conversion of jojoba oil increased with time. • FT-IR and NMR ( 1 H and 13 C) characterization

Comparison of cell uptake, biodistribution and tumor retention of folate-coated and PEG-coated gadolinium nanoparticles in tumor-bearing mice.

Science.gov (United States)

Oyewumi, Moses O; Yokel, Robert A; Jay, Michael; Coakley, Tricia; Mumper, Russell J

2004-03-24

The purpose of these studies was to compare the cell uptake, biodistribution and tumor retention of folate-coated and PEG-coated gadolinium (Gd) nanoparticles. Gd is a potential agent for neutron capture therapy (NCT) of tumors. Gd nanoparticles were engineered from oil-in-water microemulsion templates. To obtain folate-coated nanoparticles, a folate ligand [folic acid chemically linked to distearoylphosphatidylethanolamine (DSPE) via a PEG spacer MW 3350] was included in nanoparticle preparations. Similarly, control nanoparticles were coated with DSPE-PEG-MW 3350 (PEG-coated). Nanoparticles were characterized based on size, size distribution, morphology, biocompatibility and tumor cell uptake. In vivo studies were carried out in KB (human nasopharyngeal carcinoma) tumor-bearing athymic mice. Biodistribution and tumor retention studies were carried out at pre-determined time intervals after injection of nanoparticles (10 mg/kg). Gd nanoparticles did not aggregate platelets or activate neutrophils. The retention of nanoparticles in the blood 8, 16 and 24 h post-injection was 60%, 13% and 11% of the injected dose (ID), respectively. A maximum Gd tumor localization of 33+/-7 microg Gd/g was achieved. Both folate-coated and PEG-coated nanoparticles had comparable tumor accumulation. However, the cell uptake and tumor retention of folate-coated nanoparticles was significantly enhanced over PEG-coated nanoparticles. Thus, the benefits of folate ligand coating were to facilitate tumor cell internalization and retention of Gd-nanoparticles in the tumor tissue. The engineered nanoparticles may have potential in tumor-targeted delivery of Gd thereby enhancing the therapeutic success of NCT.

Data Retention and Anonymity Services

Science.gov (United States)

Berthold, Stefan; Böhme, Rainer; Köpsell, Stefan

The recently introduced legislation on data retention to aid prosecuting cyber-related crime in Europe also affects the achievable security of systems for anonymous communication on the Internet. We argue that data retention requires a review of existing security evaluations against a new class of realistic adversary models. In particular, we present theoretical results and first empirical evidence for intersection attacks by law enforcement authorities. The reference architecture for our study is the anonymity service AN.ON, from which we also collect empirical data. Our adversary model reflects an interpretation of the current implementation of the EC Directive on Data Retention in Germany.

Inter and intra GC-MS differential analysis of the essential oils of three Mentha species growing in Egypt

Directory of Open Access Journals (Sweden)

Mokhtar M. Bishr

2018-06-01

Full Text Available Gas chromatographic mass spectrometric analysis using head space was carried out on the roots, stems and leaves of three different species of Mint grown in Egypt. This study was carried out aiming to investigate the chemical composition of the essential oils obtained from roots, stem and leaves of Mentha piperita L, Mentha spicata Var. crispa L. and Mentha pulegum L. Also, we are looking to find out any difference in chemical composition between the studied species, through their studied organs. Study of different organs of the same species may give us an idea about the essential oil biosynthetic pathway and may serve as the chemotaxonomic marker for a specific species.Identification of the chemical components of the studied essential oils depends on their retention time, their Kovat retention index and their mass spectrum supported by the data from Wiley library. Results obtained revealed an obvious inter or intra differences in the chemical composition of the three mentioned Mentha species. The common components in all species (in one or more organ are 35 components, the major of which is P-menthone (32.24% in Mentha piperita leaf. Regarding the unique components it was found that Mentha piperita contain 7 unique components the major of which is 2,4-(10-thujadien (3.88%, while Mentha spicata has 18 unique components the major one is Cymene (24.44% and finally Mentha pulegum has 11 unique components the major one is (+-Isomenthol (16.64%. Keywords: Mint species, Mentha piperita, M. spicata and M. pulegum essential oil, GC-MS, Inter and intra differential analysis

A Whitham-Theory Sonic-Boom Analysis of the TU-144 Aircraft at a Mach Number of 2.2

Science.gov (United States)

Mack, Robert J.

1999-01-01

Officially, the Tu-144 was the first supersonic-cruise, passenger-carrying aircraft to enter commercial service. Design, construction, and testing were carried out by the Soviet Union, flight certification was by the Soviet Union, and the only regular passenger flights were scheduled and flown across the territory of the Soviet Union. Although it was not introduced to international passenger service, there were many significant engineering accomplishments achieved in the design, production, and flight of this aircraft. Development of the aircraft began with a prototype stage. Systematic testing and redesign led to a production aircraft in discrete stages that measurably improved the performance of the aircraft from the starting concept to final aircraft certification. It flew in competition with the English-French Concorde for a short time, but was withdrawn from national commercial service due to a lack of interest by airlines outside the Soviet Union. NASA became interested in the Tu- 144 aircraft when it was offered for use as a flying "testbed" in the study of operating characteristics of a supersonic-cruise commercial airplane. Since it had been in supersonic-cruise service, the Tu- 144 had operational characteris'tics similar to those anticipated in the conceptual aircraft designs being studied by the United States aircraft companies. In addition to the other operational tests being conducted on the Tu-144 aircraft, it was proposed that two sets of sonic-boom pressure signature measurements be made. The first set would be made on the ground, using techniques and devices similar to those in reference I and many other subsequent studies. A second set would be made in the air with an instrumented aircraft flying close under the Tu-144 in supersonic flight. Such in-flight measurements would require pressure gages that were capable of accurately recording the flow-field overpressures generated by the Tu- 144 at relatively close distances under the vehicle

Best practices in doctoral retention: Mentoring

Directory of Open Access Journals (Sweden)

Judie L. Brill

2014-06-01

Full Text Available  The aim of this critical literature review is to outline best practices in doctoral retention and the successful approach of one university to improve graduation success by providing effective mentorship for faculty and students alike. The focus of this literature review is on distance learning relationships between faculty and doctoral students, regarding retention, persistence, and mentoring models. Key phrases and words used in the search and focusing on mentoring resulted in over 20,000 sources. The search was narrowed to include only doctoral study and mentoring. Research questions of interest were: Why do high attrition rates exist for doctoral students? What are the barriers to retention? What are the benefits of doctoral mentoring? What programs do institutions have in place to reduce attrition? The researchers found a key factor influencing doctoral student retention and success is effective faculty mentorship. In particular, the design of a mentoring and faculty training program to increase retention and provide for success after graduation is important. This research represents a key area of interest in the retention literature, as institutions continue to search for ways to better support students during their doctoral programs and post-graduation. DOI: 10.18870/hlrc.v4i2.186

A Study on Employee Retention Techniques

OpenAIRE

Savarimuthu, Dr. A; Hemalatha, N.

2013-01-01

The objective of perusing this study is to assess the level of satisfaction of employee retention techniques at GB Engineering Enterprises PVT Limited., Trichy.This study gains significance because of employee retention techniques can be approached from various angles. It is desirable state of existence involving retention strategies generally fall in to one of four categories salary, working conditions, job enrichment and education. These four elements together constitute. The structure of e...

Fission-product retention in HTGR fuels

International Nuclear Information System (INIS)

Homan, F.J.; Kania, M.J.; Tiegs, T.N.

1982-01-01

Retention data for gaseous and metallic fission products are presented for both Triso-coated and Biso-coated HTGR fuel particles. Performance trends are established that relate fission product retention to operating parameters, such as temperature, burnup, and neutron exposure. It is concluded that Biso-coated particles are not adequately retentive of fission gas or metallic cesium, and Triso-coated particles which retain cesium still lose silver. Design implications related to these performance trends are identified and discussed

Hydrocolloid-Based Coatings are Effective at Reducing Acrylamide and Oil Content of French Fries

Directory of Open Access Journals (Sweden)

Asmaa Al-Asmar

2018-04-01

Full Text Available French fries are popular products worldwide. However, this product is a sufferable source of high acrylamide due to high temperature and low moisture. The main objective of this study was to evaluate the effect of grass pea flour (GPF, transglutaminase (TGase-treated (GPF + TGase, chitosan (CH, and pectin (PEC hydrocolloid coating solutions on the formation of acrylamide, water retention as well as on oil content. In addition, the Daily Intake (DI and Margin of Exposure (MOE were calculated to estimate variations in risk assessment by applying coating solutions before frying. Our results showed that the highest acrylamide content was detected in the control sample, reaching a value of 2089 µg kg−1. Hydrocolloid coating solutions were demonstrated to be an effective way to reduce acrylamide formation, with the percentage of acrylamide reduction equal to 48% for PEC, >38% for CH, ≥37% for GPF + TGase, and >31% for GPF, respectively. We hypothesized that the coatings were able to increase the water retention and, thus reduce the Maillard reaction, which is responsible for acrylamide formation. In fact, the MOE value for coated French fries was increase, resulting in being closer to the safety level to avoid carcinogenic risk. Moreover, our coatings were effective in reducing oil uptake.

Mobile Learning and Student Retention

Directory of Open Access Journals (Sweden)

Bharat Inder Fozdar

2007-06-01

Full Text Available Student retention in open and distance learning (ODL is comparatively poor to traditional education and, in some contexts, embarrassingly low. Literature on the subject of student retention in ODL indicates that even when interventions are designed and undertaken to improve student retention, they tend to fall short. Moreover, this area has not been well researched. The main aim of our research, therefore, is to better understand and measure students’ attitudes and perceptions towards the effectiveness of mobile learning. Our hope is to determine how this technology can be optimally used to improve student retention at Bachelor of Science programmes at Indira Gandhi National Open University (IGNOU in India. For our research, we used a survey. Results of this survey clearly indicate that offering mobile learning could be one method improving retention of BSc students, by enhancing their teaching/ learning and improving the efficacy of IGNOU’s existing student support system. The biggest advantage of this technology is that it can be used anywhere, anytime. Moreover, as mobile phone usage in India explodes, it offers IGNOU easy access to a larger number of learners. This study is intended to help inform those who are seeking to adopt mobile learning systems with the aim of improving communication and enriching students’ learning experiences in their ODL institutions.

Reflections on a boom: Perceptions of energy development impacts in the Bakken oil patch inform environmental science & policy priorities.

Science.gov (United States)

McGranahan, Devan Allen; Fernando, Felix N; Kirkwood, Meghan L E

2017-12-01

Ecosystems worldwide have been subject to new or intensified energy development facilitated by technologies such as horizontal drilling and hydraulic fracturing, activity that has generated concern for air, water, biotic, and social resources. Application of these technologies in the development of the Bakken oil patch has made it one of the most productive petroleum plays in North America, causing unprecedented landscape industrialization of otherwise rural, agricultural counties in western North Dakota. The region is isolated, and development impacts have not been well-studied. To identify concerns of citizens of the Bakken and determine how research and policy might support them, we conducted a two-part study: First, we held focus groups with resource management and community leaders in three major oil-producing counties. Second, we used an outline of the major concerns expressed by focus group members as a survey for landowners and farm/ranch operators. We found little relationship between survey respondents' reported categorization of energy impacts and actual land area impacted, suggesting factors such as attitude towards development, degree of compensation, and level of disturbance are relevant. Landowners agreed with focus groups on the nature of relationships between energy companies and locals and development impacts on infrastructure and communities; those reporting greater impacts tended to agree more strongly. But many specific problems described in focus groups were not widely reported in the survey, suggesting energy-community relationships can be improved through state-level public policy and respect from energy companies for locals and their way of life. Consideration of these concerns in future energy policy-both in the Bakken and worldwide-could reduce social tension, lessen environmental impact, and increase overall social, economic, and environmental efficiency in energy development. Copyright © 2017 Elsevier B.V. All rights reserved.

Conditions of persistent oil on beaches in Prince William Sound 26 years after the Exxon Valdez spill

Science.gov (United States)

Lindeberg, Mandy R.; Maselko, Jacek; Heintz, Ron A.; Fugate, Corey J.; Holland, Larry

2018-01-01

On March 24, 1989, the Exxon Valdez grounded on Bligh Reef in Prince William Sound, Alaska, spilling an estimated 10.8 million gallons of crude oil. Contrary to early projections, subsequent studies over several decades have shown subsurface oil persisting on impacted beaches. Here we present findings from a lingering oil survey conducted during the summer of 2015 at a small set of beaches in Prince William Sound known to have persistent subsurface Exxon Valdez oil. The objectives of the survey were to estimate how much oil remains at these sites, the oil composition, and oil retention rates compared to previous studies. Results from the survey found lingering oil was present at 8 of 9 sites that were revisited. Surveys revealed little evidence of change in oil area or mass over the last 14 years, nor has there been a change in the distribution of oiling intensities or their location on the beach. Detailed analysis of the oil indicated it has not weathered since 2001. Subsurface oils collected in 2015 have enriched concentrations of phenanthrenes and chrysenes relative to oil originating in the cargo hold indicating that buried oil has retained some toxic potential over the last two decades, but it is not currently bioavailable. Subsurface oil appears to be sequestered in sediments and protected from hydrological washing and low oxygen and nutrient levels inhibiting biodegradation. These findings are consistent with previous surveys and predictive geomorphic models suggesting the estimated 0.6% Exxon Valdez oil remaining is sequestered and not bioavailable unless disturbed and will likely persist in the environment on a decadal scale.

HPLC retention thermodynamics of grape and wine tannins.

Science.gov (United States)

Barak, Jennifer A; Kennedy, James A

2013-05-08

The effect of grape and wine tannin structure on retention thermodynamics under reversed-phase high-performance liquid chromatography conditions on a polystyrene divinylbenzene column was investigated. On the basis of retention response to temperature, an alternative retention factor was developed to approximate the combined temperature response of the complex, unresolvable tannin mixture. This alternative retention factor was based upon relative tannin peak areas separated by an abrupt change in solvent gradient. Using this alternative retention factor, retention thermodynamics were calculated. Van't Hoff relationships of the natural log of the alternative retention factor against temperature followed Kirchoff's relationship. An inverse quadratic equation was fit to the data, and from this the thermodynamic parameters for tannin retention were calculated. All tannin fractions exhibited exothermic, spontaneous interaction, with enthalpy-entropy compensation observed. Normalizing for tannin size, distinct tannin compositional effects on thermodynamic parameters were observed. The results of this study indicate that HPLC can be valuable for measuring the thermodynamics of tannin interaction with a hydrophobic surface and provides a potentially valuable alternative to calorimetry. Furthermore, the information gathered may provide insight into understanding red wine astringency quality.

Soil Water Retention Curve

Science.gov (United States)

Johnson, L. E.; Kim, J.; Cifelli, R.; Chandra, C. V.

2016-12-01

Potential water retention, S, is one of parameters commonly used in hydrologic modeling for soil moisture accounting. Physically, S indicates total amount of water which can be stored in soil and is expressed in units of depth. S can be represented as a change of soil moisture content and in this context is commonly used to estimate direct runoff, especially in the Soil Conservation Service (SCS) curve number (CN) method. Generally, the lumped and the distributed hydrologic models can easily use the SCS-CN method to estimate direct runoff. Changes in potential water retention have been used in previous SCS-CN studies; however, these studies have focused on long-term hydrologic simulations where S is allowed to vary at the daily time scale. While useful for hydrologic events that span multiple days, the resolution is too coarse for short-term applications such as flash flood events where S may not recover its full potential. In this study, a new method for estimating a time-variable potential water retention at hourly time-scales is presented. The methodology is applied for the Napa River basin, California. The streamflow gage at St Helena, located in the upper reaches of the basin, is used as the control gage site to evaluate the model performance as it is has minimal influences by reservoirs and diversions. Rainfall events from 2011 to 2012 are used for estimating the event-based SCS CN to transfer to S. As a result, we have derived the potential water retention curve and it is classified into three sections depending on the relative change in S. The first is a negative slope section arising from the difference in the rate of moving water through the soil column, the second is a zero change section representing the initial recovery the potential water retention, and the third is a positive change section representing the full recovery of the potential water retention. Also, we found that the soil water moving has traffic jam within 24 hours after finished first

28 CFR 345.67 - Retention of benefits.

Science.gov (United States)

2010-07-01

... INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.67 Retention of benefits. (a) Job retention. Ordinarily, when an inmate is absent from the job for a significant period of time, the SOI will... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Retention of benefits. 345.67 Section 345...

Method for removing hydrogen sulphide from oil-containing water and equipment therefore; Fremgangsmaate for aa fjerne hydrogensulfid fra oljeholdig vann

Energy Technology Data Exchange (ETDEWEB)

Hoeyvik, H; Hovland, J; Eskilt, J P

1995-02-27

The invention relates to an method for removing hydrogen sulphide (H{sub 2}S) from oil-containing water and equipment therefore. Oil-containing water and nitrate is conducted through a bioreactor to remove H{sub 2}S. Nitrate is added to the oil-containing water in a dose ratio (sulphide:nitrate) of 1:10 to 1:40. The retention time in the reactor tank is for 10-60 minutes. After this treatment, purified water, where >90% of the H{sub 2}S-amount is removed, is let out of the tank. The equipment for performing the above mentioned method, is based on a bioreactor having large density of denitrifying bacteria. The reactor tank, is filled with carrying material providing large contact area. Even distribution of oil-containing water and nitrate over the carrying material which already may be covered by septic mud, forms an active sulphide oxidizing biofilm having large surface. This biofilm makes an extremely effective equipment for removing sulphide from oil-containing water. 3 figs.

Automatic path-planning for a multilink articulated boom within the torus of a fusion reactor

International Nuclear Information System (INIS)

Smidt, D.

1986-08-01

For in-torus maintenance of fusion machines a manipulator is conveyed to the working area by a multilink-transporter, also called 'articulated boom'. Systems of this type have in general four to five links and move in the midplane of the torus. They are kinematically redundant and have a very restricted working space. In this paper automatic methods for the collision free approach of any position of the final joint within the reach of the transporter are presented, including insertion and removal. By automatic teach-in with the CAD-simulation a table of safe configurations can be generated and supplemented by a fine-positioning algorithm. (orig.) [de

Novel word retention in bilingual and monolingual speakers

Directory of Open Access Journals (Sweden)

Pui Fong eKan

2014-09-01

Full Text Available The goal of this research was to examine word retention in bilinguals and monolinguals. Long-term word retention is an essential part of vocabulary learning. Previous studies have documented that bilinguals outperform monolinguals in terms of retrieving newly-exposed words. Yet, little is known about whether or to what extent bilinguals are different from monolinguals in word retention. Participants were 30 English-speaking monolingual adults and 30 bilingual adults who speak Spanish as a home language and learned English as a second language during childhood. In a previous study (Kan, Sadagopan, Janich, & Andrade, 2014, the participants were exposed to the target novel words in English, Spanish, and Cantonese. In this current study, word retention was measured a week after the fast mapping task. No exposures were given during the one-week interval. Results showed that bilinguals and monolinguals retain a similar number of words. However, participants produced more words in English than in either Spanish or Cantonese. Correlation analyses revealed that language knowledge plays a role in the relationships between fast mapping and word retention. Specifically, within- and across-language relationships between bilinguals’ fast mapping and word retention were found in Spanish and English, by contrast, within-language relationships between monolinguals’ fast mapping and word retention were found in English and across-language relationships between their fast mapping and word retention performance in English and Cantonese. Similarly, bilinguals differed from monolinguals in the relationships among the word retention scores in three languages. Significant correlations were found among bilinguals’ retention scores. However, no such correlations were found among monolinguals’ retention scores. The overall findings suggest that bilinguals’ language experience and language knowledge most likely contribute to how they learn and retain new words.

Novel word retention in bilingual and monolingual speakers.

Science.gov (United States)

Kan, Pui Fong; Sadagopan, Neeraja

2014-01-01

The goal of this research was to examine word retention in bilinguals and monolinguals. Long-term word retention is an essential part of vocabulary learning. Previous studies have documented that bilinguals outperform monolinguals in terms of retrieving newly-exposed words. Yet, little is known about whether or to what extent bilinguals are different from monolinguals in word retention. Participants were 30 English-speaking monolingual adults and 30 bilingual adults who speak Spanish as a home language and learned English as a second language during childhood. In a previous study (Kan et al., 2014), the participants were exposed to the target novel words in English, Spanish, and Cantonese. In this current study, word retention was measured a week after the fast mapping task. No exposures were given during the one-week interval. Results showed that bilinguals and monolinguals retain a similar number of words. However, participants produced more words in English than in either Spanish or Cantonese. Correlation analyses revealed that language knowledge plays a role in the relationships between fast mapping and word retention. Specifically, within- and across-language relationships between bilinguals' fast mapping and word retention were found in Spanish and English, by contrast, within-language relationships between monolinguals' fast mapping and word retention were found in English and across-language relationships between their fast mapping and word retention performance in English and Cantonese. Similarly, bilinguals differed from monolinguals in the relationships among the word retention scores in three languages. Significant correlations were found among bilinguals' retention scores. However, no such correlations were found among monolinguals' retention scores. The overall findings suggest that bilinguals' language experience and language knowledge most likely contribute to how they learn and retain new words.

International perspectives on retention and persistence

Directory of Open Access Journals (Sweden)

Gary Burkholder

2014-06-01

Full Text Available Access to higher education globally is increasing dramatically; attainment of tertiary degrees is a high priority, as educational attainment is associated with increased personal incomes as well as growth of the middle class in developing countries. The purpose of this essay is to briefly examine retention and persistence issues from a global perspective, review some retention strategies that have been employed at schools outside the United States, and to identify several key factors that related to retention and persistence globally, including access, infrastructure, financial consideration, and readiness for tertiary education.  There exists an opportunity to utilize knowledge gained in the evolution of the higher education system in the United States to help address the problems associated with retention and persistence.   DOI: 10.18870/hlrc.v4i2.208

Strategies for improving employee retention.

Science.gov (United States)

Verlander, Edward G; Evans, Martin R

2007-03-28

This article proposes a solution to the perennial problem of talent retention in the clinical laboratory. It includes the presentation of 12 strategies that may be used to significantly improve institutional identity formation and establishment of the psychological contract that employees form with laboratory management. Identity formation and psychological contracting are deemed as essential in helping reduce employee turnover and increase retention. The 12 conversational strategies may be used as a set of best practices for all employees, but most importantly for new employees, and should be implemented at the critical moment when employees first join the laboratory. This time is referred to as "retention on-boarding"--the period of induction and laboratory orientation. Retention on-boarding involves a dialogue between employees and management that is focused on the psychological, practical, cultural, and political dimensions of the laboratory. It is placed in the context of the modern clinical laboratory, which is faced with employing and managing Generation X knowledge workers. Specific topics and broad content areas of those conversations are outlined.

Composition and Chemical Variability of the Needle Oil from Pinus halepensis growing in Corsica.

Science.gov (United States)

Nam, Anne-Marie; Tomi, Félix; Gibernau, Marc; Casanova, Joseph; Bighelli, Ange

2016-04-01

The composition of oil samples isolated from needles of Pinus halepensis growing in three locations in Corsica (Saleccia, Capo di Feno, and Tre Padule) has been investigated by combination of chromatographic (GC with retention indices) and spectroscopic (MS and (13)C-NMR) techniques. In total, 35 compounds that accounted for 77 - 100% of the whole composition have been identified. α-Pinene, myrcene, and (E)-β-caryophyllene were the major component followed by α-humulene and 2-phenylethyl isovalerate. Various diterpenes have been identified as minor components. 47 Oil samples isolated from pine needles have been analyzed and were differentiated in two groups. Oil samples of the first group (15 samples) contained myrcene (M = 28.1 g/100 g; SD = 10.6) and (E)-β-caryophyllene (M = 19.0 g/100 g; SD = 2.2) as major components and diterpenes were absent. All these oil samples were isolated from pine needles harvested in Saleccia. Oil samples of the second group (32 samples) contained mostly (E)-β-caryophyllene (M = 28.7 g/100 g; SD = 7.9), α-pinene (M = 12.3 g/100 g; SD = 3.6), and myrcene (M = 11.7 g/100 g; SD = 7.3). All these oil samples were isolated from pine needles harvested in Capo di Feno and Tre Padule. © 2016 Verlag Helvetica Chimica Acta AG, Zürich.

phosphorus retention data and metadata

Science.gov (United States)

phosphorus retention in wetlands data and metadataThis dataset is associated with the following publication:Lane , C., and B. Autrey. Phosphorus retention of forested and emergent marsh depressional wetlands in differing land uses in Florida, USA. Wetlands Ecology and Management. Springer Science and Business Media B.V;Formerly Kluwer Academic Publishers B.V., GERMANY, 24(1): 45-60, (2016).

The effect of anethole containing essentials oils on nutrients digestibility of pigs

Directory of Open Access Journals (Sweden)

Ladislav Zeman

2009-01-01

Full Text Available The plant additives and their functional components can selectively influence the intestinal microorganism growth in positive or negative direction. If the growth promotion relates with positive microorganisms and growth elimination is connected with pathogens the results is nutrients utilization improvement, stimulation of immunologic system or positive influence of intermedial metabolism. Anethole is one of these important plant metabolites. There are described following positive effects of anethole in human medicine: vasorelaxant, antithrombotic, releasing of heart function, fytoestrogenic (it mean improving of milk secretion, menstruation, promotion of menses, birth improvement, men’s hormonal changes improving, sexual libido improving, antioxidative, antifungal, improvement of derma permeability, antihelmintic, insecticidal, yeast elimination, antibacterial, antipyretic.In our work the effect of anise and fennel essential oils on nutrients utilization in pig experiment was evaluated. The trial was organized in accredited experimental stable Žabčice of Mendel University of Agriculture and Forestry Brno. The high level efficiency of experimental animals is mentioned through general parameters (average daily gain, feed intake and feed conversion. The results of nutrients utilization rate show slightly higher digestibility of nutrients in treatment with anise oil, this improvement is not higher then 1.0 %. We can see also improvement of nitrogen retention in body mass on level of 5.6 % (anise treatment compared with control group. There is low variability between experimental animals (except nitrogen retention coefficient but we can not see any statistical significance. On base of these results we can say the used phytogenic additives do not affect negatively the nutrient utilization in used concentration (0.1 % of essential oil in feed mixture and are fully eligible for animal nutrition. These results are also supported by few

Effect of Recycle Sludge on Anaerobic Digestion of Palm Oil Mill Effluent in A Thermophilic Continuous Digester

Science.gov (United States)

Irvan; Trisakti, B.; Tomiuchi, Y.; Harahap, U.; Daimon, H.

2017-06-01

The objective of this research is to maintain short retention time and high degradation of palm oil mill effluent (POME) to biogas by applying recycle sludge. Fresh POME from Rambutan Mill without further treatment was used as feed. Two lab-scale digesters supported from Metawater Co. Ltd. have been applied to treat POME at thermophilic (55°C) condition. Both digesters were operated under intermittent operation mode. Experiments were performed in two methods: with and without recycle sludge. Hydraulic retention time (HRT) of both methods was maintained at 6 days, while sludge retention time (SRT) was maintained at various days. The result showed that by extending SRT in return sludge process where 25% of digested slurry recycled to the digester, improvement of volatile solid (VS) decomposition was obtained around 84% at HRT of 6 days and SRT of 21 days. Then, chemical oxygen demand (COD) removal efficiency could be reached until 85% by using recycle sludge.

Employee retention: a customer service approach.

Science.gov (United States)

Gerson, Richard F

2002-01-01

Employee retention is a huge problem. There are staff shortages in radiology because not enough people are entering the profession; too many people are leaving the profession for retirement, higher-paying jobs or jobs with less stress; and there are not enough opportunities for career advancement. Staff shortages are exacerbated by difficulty in retaining people who enter the profession. While much work has been focused on recruitment and getting more people "in the front door," I suggest that the bulk of future efforts be focused on employee retention and "closing the back door." Employee retention must be an ongoing process, not a program. Approaches to employee retention that focus on external things, i.e., things that the company can do to or for the employee, generally are not successful. The truth is that employee retention processes must focus on what the employee gets out of the job. The process must be a benefits-based approach that helps employees answer the question, "What's in it for me?" The retention processes must be ongoing and integrated into the daily culture of the company. The best way to keep your employees is to treat them like customers. Customer service works for external customers. We treat them nicely. We work to satisfy them. We help them achieve their goals. Why not do the same for our employees? If positive customer service policies and practices can satisfy and keep external customers, why not adapt these policies and practices for employees? And, there is a service/satisfaction link between employee retention and higher levels of customer satisfaction. Customers prefer dealing with the same employees over and over again. Employee turnover destroys a customer's confidence in the company. Just like a customer does not want to have to "train and educate" a new provider, they do not want to do the same for your "revolving door" employees. So, the key is to keep employees so they in turn will help you keep your customers. Because the

Deuterium retention in molten salt electrodeposition tungsten coatings

International Nuclear Information System (INIS)

Zhou, Hai-Shan; Xu, Yu-Ping; Sun, Ning-Bo; Zhang, Ying-Chun; Oya, Yasuhisa; Zhao, Ming-Zhong; Mao, Hong-Min; Ding, Fang; Liu, Feng; Luo, Guang-Nan

2016-01-01

Highlights: • We investigate D retention in electrodeposition W coatings. • W coatings are exposed to D plasmas in the EAST tokamak. • A cathodic current density dependence on D retention is found. • Electrodeposition W exhibits lower D retention than VPS-W. - Abstract: Molten salt electrodeposition is a promising technology to manufacture the first wall of a fusion reactor. Deuterium (D) retention behavior in molten salt electrodeposition tungsten (W) coatings has been investigated by D-plasma exposure in the EAST tokamak and D-ion implantation in an ion beam facility. Tokamak exposure experiments demonstrate that coatings prepared with lower current density exhibit less D retention and milder surface damage. Deuterium-ion implantation experiments indicate the D retention in the molten salt electrodeposition W is less than that in vacuum plasma spraying W and polycrystalline W.

Deuterium retention in molten salt electrodeposition tungsten coatings

Energy Technology Data Exchange (ETDEWEB)

Zhou, Hai-Shan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Xu, Yu-Ping [Science Island Branch of Graduate School, University of Science and Technology of China, Hefei (China); Sun, Ning-Bo; Zhang, Ying-Chun [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing (China); Oya, Yasuhisa [Radioscience Research Laboratory, Faculty of Science, Shizuoka University, Shizuoka (Japan); Zhao, Ming-Zhong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Mao, Hong-Min [Science Island Branch of Graduate School, University of Science and Technology of China, Hefei (China); Ding, Fang; Liu, Feng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Luo, Guang-Nan, E-mail: gnluo@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Science Island Branch of Graduate School, University of Science and Technology of China, Hefei (China); Hefei Center for Physical Science and Technology, Hefei (China); Hefei Science Center of Chinese Academy of Science, Hefei (China)

2016-12-15

Highlights: • We investigate D retention in electrodeposition W coatings. • W coatings are exposed to D plasmas in the EAST tokamak. • A cathodic current density dependence on D retention is found. • Electrodeposition W exhibits lower D retention than VPS-W. - Abstract: Molten salt electrodeposition is a promising technology to manufacture the first wall of a fusion reactor. Deuterium (D) retention behavior in molten salt electrodeposition tungsten (W) coatings has been investigated by D-plasma exposure in the EAST tokamak and D-ion implantation in an ion beam facility. Tokamak exposure experiments demonstrate that coatings prepared with lower current density exhibit less D retention and milder surface damage. Deuterium-ion implantation experiments indicate the D retention in the molten salt electrodeposition W is less than that in vacuum plasma spraying W and polycrystalline W.

Effects of canarium fruit (Canarium odontophyllum oil as a dietary lipid source for juvenile mahseer (Tor tambroides performance

Directory of Open Access Journals (Sweden)

M.L. Bami

2017-05-01

Full Text Available Canarium is among the riverine fruits that are commonly found in the natural diet of Malaysian mahseer, Tor tambroides. The fruit contains a high percentage of lipids. This study was conducted to investigate the effects of canarium crude oil on the growth performance, body composition and fatty acid profile of juvenile T. tambroides. Five isonitrogenous (40% crude protein diets containing varying canarium oil levels (0, 1.25, 2.5, 3.75 and 5% were prepared. Crude palm oil (CPO was used as the control. The juveniles (2.08 ± 0.10 g were given the test diets for 12 weeks in triplicate groups. Diets containing canarium oil were found to be less accepted by the fish which led to a significantly lower (P  0.05 on survival and lean portion of juvenile T. tambroides. The fish fed canarium oil-free diet also had better tissue fatty acid profile (especially n-3 and n-6 PUFA as well as better protein, lipid and energy retention than those fed diets including canarium oil. From the results, canarium oil extracted from the whole fruit was not recommended as a dietary lipid source for T. tambroides. Moreover, juveniles fed on 0% canarium oil (5% CPO utilized dietary saturated fatty acids (SFA and monounsaturated fatty acids (MUFA more efficiently for their energy requirement than fish given canarium oil.

Oil characterisation: assessment of composition, risks, degradation and remediation potential of total petroleum hydrocarbons in soil

Energy Technology Data Exchange (ETDEWEB)

Lookman, R.; Vanermen, G.; Van De Weghe, H.; Gemoets, J. [Vito, Mol (Belgium); Van der Sterren, G.; Alphenaar, A. [TTE, Deventer (Netherlands)

2005-07-01

Several methods are available for the characterization of petroleum hydrocarbons. The TPHCWG (Total Petroleum Hydrocarbon Criteria Working Group) developed a method based on a silica column separation of aromatics and aliphatics and a GC-FID subdivision into equivalent-carbon fractions (EC) ('TPH-method'). This method was mainly developed for assessing human risks of oil compounds. Within NOBIS (Dutch Research program Biological In-situ Remediation), another method was developed based upon an equilibrium-experiment of the oil-polluted soil with water (column recirculation), which was further developed by TTE ('TTE-method'). This method uses measured water solubilities of individual oil components and GC-retention times yielding a subdivision of the hydrocarbons into compound classes that are relevant for assessing the remediation potential of the specific oil pollution. In this paper we present results of a research project in which we developed a new method, the 'OK-method' that combines these two procedures and allows a complete characterisation of the oil in terms of composition, (human) risks, volatility, solubility, plume behaviour (migration velocities of the soluble components) and aerobic degradation potential. (authors)

After Welfare Reform and an Economic Boom: Why Is Child Poverty Still So Much Higher in the U.S. Than in Europe?

Science.gov (United States)

Danziger, Sheldon

This paper argues that the U.S.'s experience during the economic boom of the 1990s, together with its choices concerning social welfare policies, imply that child poverty in the United States will be much higher than that in most European countries. It hypothesizes that Americans reveal their preferences about the extent of poverty they are…

Novel word retention in sequential bilingual children.

Science.gov (United States)

Kan, Pui Fong

2014-03-01

Children's ability to learn and retain new words is fundamental to their vocabulary development. This study examined word retention in children learning a home language (L1) from birth and a second language (L2) in preschool settings. Participants were presented with sixteen novel words in L1 and in L2 and were tested for retention after either a 2-month or a 4-month delay. Results showed that children retained more words in L1 than in L2 for both of the retention interval conditions. In addition, children's word retention was associated with their existing language knowledge and their fast-mapping performance within and across language. The patterns of association, however, were different between L1 and L2. These findings suggest that children's word retention might be related to the interactions of various components that are operating within a dynamic system.

A Cost Benefit Analysis Between the Current Naval Officer Retention Bonus Plan and the Enlisted Retention Bonus Plan

Science.gov (United States)

2016-06-01

that personnel targeted for retention had a direct ability to affect the success of the transaction and company. High potential, job function, job level...and job title rounded out the top five reasons personnel were targeted for retention . In brief, this study found that slightly more than half of...lower income may value the job security provided by service in the military, thus making retention in the military a more attractive option. 4

Promoting Special Educator Teacher Retention

OpenAIRE

Jeremy E. Vittek