WorldWideScience

Sample records for oil property appraisal

  1. 7 CFR 1980.444 - Appraisal of property serving as collateral.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Appraisal of property serving as collateral. 1980.444... Program § 1980.444 Appraisal of property serving as collateral. (a) Appraisal reports prepared by independent qualified fee appraisers will be required on all property that will serve as collateral. In the...

  2. 7 CFR 3015.56 - Appraisal of real property.

    Science.gov (United States)

    2010-01-01

    ... of real property. In some cases, it will be necessary to establish the market value of land or a building or the fair rental rate of land or of space in a building. In these cases, the awarding agency must require that the market value or fair rental rate be set by an independent appraiser (or by a...

  3. ECONOMICS AND APPRAISAL OF CONVENTIONAL OIL AND GAS IN THE WESTERN GULF OF MEXICO.

    Science.gov (United States)

    Attanasi, E.D.; Haynes, John L.

    1984-01-01

    The oil and gas industry frequently appraises undiscovered oil and gas resources on a regional basis to decide whether to start or continue exploration programs. The appraisals are of little value unless conditioned by estimates of the costs of finding and producing the resources. This paper presents an economic appraisal of undiscovered oil and gas resources in the western Gulf of Mexico. Also presented are a description of the model used to make the assessment, results of a sensitivity analysis, and a discussion of the implications of the results to the industry. The appraisal is shown to be relatively robust to changes in physical and engineering assumptions. Because the number of commercial discoveries was found to be quite sensitive to economic conditions, the analysis has important implications in terms of forecasting future industry drilling and other associated activities in the western Gulf of Mexico.

  4. Vegetable oil spills : oil properties and behaviour

    International Nuclear Information System (INIS)

    Fingas, M.; Fieldhouse, B.; Jokuty, P.

    2001-01-01

    In 1997, the United States Environmental Protection Agency conducted a thorough review of the issue regarding vegetable oil spills. Recent attention has refocused on this issue as a result of an incident where 20 tons of canola oil was spilled in the Vancouver Harbour in 2000. In the past, vegetable oils were suggested to be a useful test material because they were thought to be innocuous. It was even suggested they be used to remove petroleum oil residues from beaches. However, recent studies have shown that spills of vegetable oils can have major environmental consequences, equivalent to those of petroleum oil spills. The spills have devastating effects on birds and intertidal organisms. This paper presented a summary of historical vegetable spills from around the world. In this study, specific behaviour tests were examined for several oils including canola, soy bean, olive, castor and corn oils. Evaporation, water-in-oil emulsification and chemical dispersion were measured and were found to be nearly zero, suggesting that vegetable oil spills are not very soluble in water. The aquatic toxicity of vegetable oil is low, but their fate is quite different from petroleum. Vegetable oils do not evaporate to a significant degree, they do not form water-in-oil emulsions, nor do they disperse in water. The physical properties of vegetable oils were also measured, including density and viscosity. This paper presented the aquatic toxicity of several vegetable oils along with other environmental data including the degradation rates noted in the literature. Most environmental damage reported in the literature is by contact with birds feathers resulting in hypothermia and secondly by smothering of intertidal organisms. The effect of vegetable oil on fish has not been well studied, but it is expected that there will be little destructive effect except where smothering can occur. 35 refs., 3 tabs

  5. Vegetable oil spills : oil properties and behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Fingas, M.; Fieldhouse, B.; Jokuty, P. [Environment Canada, Ottawa, ON (Canada). Emergencies Science Div

    2001-07-01

    In 1997, the United States Environmental Protection Agency conducted a thorough review of the issue regarding vegetable oil spills. Recent attention has refocused on this issue as a result of an incident where 20 tons of canola oil was spilled in the Vancouver Harbour in 2000. In the past, vegetable oils were suggested to be a useful test material because they were thought to be innocuous. It was even suggested they be used to remove petroleum oil residues from beaches. However, recent studies have shown that spills of vegetable oils can have major environmental consequences, equivalent to those of petroleum oil spills. The spills have devastating effects on birds and intertidal organisms. This paper presented a summary of historical vegetable spills from around the world. In this study, specific behaviour tests were examined for several oils including canola, soy bean, olive, castor and corn oils. Evaporation, water-in-oil emulsification and chemical dispersion were measured and were found to be nearly zero, suggesting that vegetable oil spills are not very soluble in water. The aquatic toxicity of vegetable oil is low, but their fate is quite different from petroleum. Vegetable oils do not evaporate to a significant degree, they do not form water-in-oil emulsions, nor do they disperse in water. The physical properties of vegetable oils were also measured, including density and viscosity. This paper presented the aquatic toxicity of several vegetable oils along with other environmental data including the degradation rates noted in the literature. Most environmental damage reported in the literature is by contact with birds feathers resulting in hypothermia and secondly by smothering of intertidal organisms. The effect of vegetable oil on fish has not been well studied, but it is expected that there will be little destructive effect except where smothering can occur. 35 refs., 3 tabs.

  6. Protocol for Appraisal of Petroleum Producing Properties on Native American Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-27

    Petroleum is currently produced on Native American Tribal Lands and has been produced on some of these lands for approximately 100 years. As these properties are abandoned at a production level that is considered the economic limit by the operator, Native American Tribes are considering this an opportunity to assume operator status to keep the properties producing. In addition to operating properties as they are abandoned, Native American Tribes also are assuming liabilities of the former operator(s) and ownership of equipment left upon abandonment. Often, operators are assumed by Native American Tribes without consideration of the liabilities left by the former operators. The purpose of this report is to provide protocols for the appraisal of petroleum producing properties and analysis of the petroleum resource to be produced after assuming operations. The appraisal protocols provide a spreadsheet for analysis of the producing property and a checklist of items to bring along before entering the property for onsite appraisal of the property. The report will provide examples of some environmental flags that may indicate potential liabilities remaining on the property left unaddressed by previous operators. It provides a starting point for appraisal and analysis of a property with a basis to make the decision to assume operations or to pursue remediation and/or closure of the liabilities of previous operators.

  7. A catalogue of crude oil and oil product properties, 1990

    International Nuclear Information System (INIS)

    Bobra, M.A.; Callaghan, S.

    1990-09-01

    This catalogue is a compilation of available data on crude oils and petroleum products. The emphasis of the catalogue is upon oils which could potentially impact Canada's environment. Other oils which are unlikely to be of direct Canadian concern are also included because they have been well characterized and used in relevant studies. The properties listed for each oil are those which will provide an indication of a spilled oil's environmental behaviour and effects. The properties on which data is provided include API gravity, density, viscosity, interfacial tension, pour point, flash point, vapor pressure, volatility and component distribution, emulsion formation tendency and stability, weathering, dispersability, major hydrocarbon groups, aqueous solubility, toxicity, sulfur content, fire point, and wax content. Most of the chemical-physical properties listed in this catalogue were measured using standard tests. For certain properties, data are given at different temperatures and for different degrees of oil weathering. An oil's degree of weathering is expresed as the volume or weight percent evaporated from the fresh oil. Weathered oils used for testing were artificially weathered by gas stripping following the method of Mackay and Stiver. 109 refs

  8. A catalogue of crude oil and oil product properties, 1992

    International Nuclear Information System (INIS)

    Whiticar, S.; Bobra, M.; Liuzzo, P.; Callaghan, S.; Fingas, M.; Jokuty, P.; Ackerman, F.; Cao, J.

    1993-02-01

    This catalogue is a compilation of available data on crude oils and petroleum products. The emphasis of the catalogue is upon oils which could potentially impact Canada's environment. Other oils which are unlikely to be of direct Canadian concern are also included because they have been well characterized and used in relevant studies. The properties listed for each oil are those which will provide an indication of a spilled oil's environmental behaviour and effects. The properties on which data is provided include API gravity, density, viscosity, interfacial tension, pour point, flash point, vapor pressure, volatility and component distribution, emulsion formation tendency and stability, weathering, dispersability, major hydrocarbon groups, aqueous solubility, toxicity, sulfur content, fire point, and wax content. Most of the chemical-physical properties listed in this catalogue were measured using standard tests. For certain properties, data are given at different temperatures and for different degrees of oil weathering. An oil's degree of weathering is expresed as the volume or weight percent evaporated from the fresh oil. Weathered oils used for testing were artificially weathered by gas stripping following the method of Mackay and Stiver. 140 refs

  9. Elastohydrodynamic Traction Properties of Seed Oils

    Science.gov (United States)

    The elastohydrodynamic traction coefficient (tc) properties of nine seed oils of varying chemical structures, PAO and hexadecane, were investigated using a ball-on disk traction apparatus. The seed oils were: castor oil, a triglyceride with hydroxyl functional group; jojoba, a monoglyceride; and s...

  10. Elastohydrodynamic (EHD) traction properties of seed oils

    Science.gov (United States)

    The elastohydrodynamic traction coefficient (tc) properties of nine seed oils of varying chemical structures, PAO and hexadecane, were investigated using a ball-on disk traction apparatus. The seed oils were: castor oil, a triglyceride with hydroxyl functional group; jojoba, a monoglyceride; and sev...

  11. Some basic properties of environmentally adapted oils

    Energy Technology Data Exchange (ETDEWEB)

    Hoeglund, E. [Div. of Machine Elements, Luleaa University of Technology (Sweden)

    1998-11-01

    Environmental concern has led to a development of lubricants that are less harmful to the environmental than traditional mineral based oils. Biodegradability and non-toxicity are desired properties together with a competitive price and if possible they should also be derived from renewable raw materials. In order to have a major breakthrough for the new, environmentally adapted lubricating oils they must perform well in mechanical and hydraulic systems. They must reduce wear, increase efficiency and reduce maintenance costs equally well, or preferably better than mineral based oils. This paper presents primary results from an investigation where four environmentally adapted oils (rape seed, pine tree, diester and TMP-ester) are compared to a conventional naphthenic mineral oil. Viscosity and viscosity-pressure coefficients, limiting shear stress, friction properties and film forming ability have been evaluated under elastohydrodynamic conditions. It was found that the mineral oil had the highest values of pressure-viscosity coefficient, limiting shear stress and coefficient of friction. Rape seed oil had the second highest pressure-viscosity coefficient but the lowest limiting shear stress and coefficient of friction. Pine tree oil, diester and TMP-ester formed an intermediate group with rather similar results. The Hamrock-Dowson equation for central film thickness was found to overestimate film thickness by about 10-20 per cent with the least discrepancy for the mineral oil. (orig.) 8 refs.

  12. Methodology for assessment of undiscovered oil and gas resources for the 2008 Circum-Arctic Resource Appraisal

    Science.gov (United States)

    Charpentier, Ronald R.; Moore, Thomas E.; Gautier, D.L.

    2017-11-15

    The methodological procedures used in the geologic assessments of the 2008 Circum-Arctic Resource Appraisal (CARA) were based largely on the methodology developed for the 2000 U.S. Geological Survey World Petroleum Assessment. The main variables were probability distributions for numbers and sizes of undiscovered accumulations with an associated risk of occurrence. The CARA methodology expanded on the previous methodology in providing additional tools and procedures more applicable to the many Arctic basins that have little or no exploration history. Most importantly, geologic analogs from a database constructed for this study were used in many of the assessments to constrain numbers and sizes of undiscovered oil and gas accumulations.

  13. 41 CFR 102-75.305 - What type of appraisal value must be obtained for real property disposal transactions?

    Science.gov (United States)

    2010-07-01

    ... either the fair market value or the fair annual rental value of the property available for disposal. ... value must be obtained for real property disposal transactions? 102-75.305 Section 102-75.305 Public...-75.305 What type of appraisal value must be obtained for real property disposal transactions? For all...

  14. Environmental audits of oil and gas properties

    International Nuclear Information System (INIS)

    Moody, T.D.; Forbes, S.

    1991-01-01

    The growing concern over one, the cost of correcting environmental damage and two, the potential financial liabilities associated with the acquisition, sale or lease of oil and gas properties, has led many prospective buyers to investigate the environmental liabilities associated with the property transfer. The environmental audit provides a tool or mechanism to assist the prudent investor in identifying environmental problems that could adversely effect an otherwise normal business activity. Accordingly, an environmental audit can identify potential environmental liabilities associated with the property, thus allowing the investor an opportunity to better assess financial risks. In addition, should the negative findings of the environmental audit be limited, the findings could be used by the buyer in negotiating the final price of the subject property to account for potential or known liabilities. As this suggests, environmental damage to an oil and gas property does not necessarily render the property worthless. This paper provides a brief guide on environmental audits of oil and gas properties as well as general information on the most common exploration and production wastes

  15. 24 CFR 100.135 - Unlawful practices in the selling, brokering, or appraising of residential real property.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Unlawful practices in the selling, brokering, or appraising of residential real property. 100.135 Section 100.135 Housing and Urban Development... residential real property in connection with the sale, rental, or financing of any dwelling where the person...

  16. Moldicidal properties of seven essential oils

    Science.gov (United States)

    Vina W. Yang; Carol A. Clausen

    2006-01-01

    When wood and wood products are exposed to moisture during storage, construction or while in-service, mold growth can occur in 24 to 48 hours. Mold growth could be suppressed or prevented if wood was treated with an effective mold inhibitor. The objective of this study was to evaluate the mold inhibiting properties of natural plant extracts such as essential oils....

  17. Non-Technical Skills for Surgeons (NOTSS): Critical appraisal of its measurement properties.

    Science.gov (United States)

    Jung, James J; Borkhoff, Cornelia M; Jüni, Peter; Grantcharov, Teodor P

    2018-02-17

    To critically appraise the development and measurement properties, including sensibility, reliability, and validity of the Non-Technical Skills of Surgeons (NOTSS) system. Articles that described development process of the NOTSS system were identified. Relevant primary studies that presented evidence of reliability and validity were identified through a comprehensive literature review. NOTSS was developed through robust item generation and reduction strategies. It was shown to have good content validity, acceptability, and feasibility. Inter-rater reliability increased with greater expertise and number of assessors. Studies demonstrated evidence of cross-sectional construct validity, in that the tool was able to differentiate known groups of varied non-technical skill levels. Evidence of longitudinal construct validity also existed to demonstrate that NOTSS detected changes in non-technical skills before and after targeted training. In populations and settings presented in our critical appraisal, NOTSS provided reliable and valid measurements of intraoperative non-technical skills of surgeons. Copyright © 2018 Elsevier Inc. All rights reserved.

  18. Mathematical simulation of oil reservoir properties

    International Nuclear Information System (INIS)

    Ramirez, A.; Romero, A.; Chavez, F.; Carrillo, F.; Lopez, S.

    2008-01-01

    The study and computational representation of porous media properties are very important for many industries where problems of fluid flow, percolation phenomena and liquid movement and stagnation are involved, for example, in building constructions, ore processing, chemical industries, mining, corrosion sciences, etc. Nevertheless, these kinds of processes present a noneasy behavior to be predicted and mathematical models must include statistical analysis, fractal and/or stochastic procedures to do it. This work shows the characterization of sandstone berea core samples which can be found as a porous media (PM) in natural oil reservoirs, rock formations, etc. and the development of a mathematical algorithm for simulating the anisotropic characteristics of a PM based on a stochastic distribution of some of their most important properties like porosity, permeability, pressure and saturation. Finally a stochastic process is used again to simulated the topography of an oil reservoir

  19. Essential oil of the leaves of Ricinus communis L.: in vitro cytotoxicity and antimicrobial properties.

    Science.gov (United States)

    Zarai, Zied; Ben Chobba, Ines; Ben Mansour, Riadh; Békir, Ahmed; Gharsallah, Néji; Kadri, Adel

    2012-08-13

    The aim of the present study was to appraise the antimicrobial activity of Ricinus communis L. essential oil against different pathogenic microorganisms and the cytotoxic activity against HeLa cell lines. The agar disk diffusion method was used to study the antibacterial activity of Ricinus communis L. essential oil against 12 bacterial and 4 fungi strains. The disc diameters of zone of inhibition (DD), the minimum inhibitory concentrations (MIC) and the concentration inhibiting 50% (IC50) were investigated to characterize the antimicrobial activities of this essential oil. The in vitro cytotoxicity of Ricinus communis L. essential oil was examined using a modified MTT assay; the viability and the IC50 were used to evaluate this test. The essential oil from the leaves of Ricinus communis L. was analyzed by GC-MS and bioassays were carried out. Five constituents of the oil were identified by GC-MS. The antimicrobial activity of the oil was investigated in order to evaluate its efficacy against twelve bacteria and four fungi species, using disc diffusion and minimum inhibitory concentration methods. The essential oil showed strong antimicrobial activity against all microorganisms tested with higher sensitivity for Bacillus subtilis, Staphylococcus aureus and Enterobacter cloacae. The cytotoxic and apoptotic effects of the essential oil on HeLa cell lines were examined by MTT assay. The cytotoxicity of the oil was quite strong with IC50 values less than 2.63 mg/ml for both cell lines. The present study showed the potential antimicrobial and anticarcinogenic properties of the essential oil of Ricinus communis L., indicating the possibilities of its potential use in the formula of natural remedies for the topical treatment of infections.

  20. Analysis of filtration properties of locally sourced base oil for the ...

    African Journals Online (AJOL)

    This study examines the use of locally sourced oil like, groundnut oil, melon oil, vegetable oil, soya oil and palm oil as substitute for diesel oil in formulating oil base drilling fluids relative to filtration properties. The filtrate volumes of each of the oils were obtained for filtration control analysis. With increasing potash and ...

  1. HOW PROPERTIES OF EDIBLE OILS ARE IMPROVED BY ESSENTIAL OILS

    Directory of Open Access Journals (Sweden)

    SONIA AMARIEI

    2016-10-01

    Full Text Available The main aim of the present paper is to find out whether the addition of essential oils determines better oxidation stability and positive change of sensory and hedonic perception of edible oils. The oxidation stability of sunflower, corn and grape seed oils was analyzed in the presence of antioxidants in essential oils of rosemary (Rosmarinus officinalis, thyme (Thymus vulgaris and basil (Ocimum basilicum during storage, under conditions of accelerated oxidative processes (4 days, at 60 °C. The total phenolic compounds of these essential oils were determined by the Folin-Ciocalteu method. The DPPH method was used to evaluate the antioxidant capacity of basil, rosemary and thyme essential oils in comparison with known synthetic antioxidant L(+-ascorbic acid. The addition of essential oils to edible oils, the amounts proposed in analyses, determines a favorable influence on their oxidation stability as well as their taste. The influence of addition of essential oils on the taste of edible oils was studied in two products consumed mainly at breakfast, bread and spinach leaves. The results recommend the use of these plant extracts as additives in edible oils rather than synthetic antioxidants.

  2. Fuel properties of biodiesel from vegetable oils and oil mixtures. Influence of methyl esters distribution

    International Nuclear Information System (INIS)

    Martínez, G.; Sánchez, N.; Encinar, J.M.; González, J.F.

    2014-01-01

    In this work, the quality of biodiesel produced by basic transesterification from several vegetable oils (soybean, rapeseed, sunflower, high oleic sunflower, Cynara Cardunculus L., Brassica Carinata and Jatropha Curca) cultivated in Extremadura has been studied in detail. The influence of raw material composition on properties such as density, viscosity, cetane number, higher heating value, iodine and saponification values and cold filter plugging point has been verified. Other biodiesel properties such as acid value, water content and flash and combustion points were more dependent on characteristics of production process. Biodiesel produced by rapeseed, sunflower and high oleic sunflower oils transesterification have been biofuels with better properties according to Norm EN 14214. Finally, it has been tested that it is possible to use oils mixtures in biodiesel production in order to improve the biodiesel quality. In addition, with the same process conditions and knowing properties of biodiesel from pure oils; for biodiesel from oils mixtures, its methyl esters content, and therefore properties dependent this content can be predicted from a simple mathematical equation proposed in this work. - Highlights: • Biodiesel quality produced by basic transesterification from vegetable oils. • We examine influences of methyl esters distribution on biodiesel properties. • Biofuels from soybean, sunflower and rapeseed oils were with better properties. • Oils mixtures improve biodiesel quality to fulfill Norm EN 14214. • An equation to predict properties of biodiesel from oil mixtures is proposed

  3. Comparative study of the chemical properties of palm oil extracted ...

    African Journals Online (AJOL)

    The chemical properties of oil samples determined were free fatty acid, acid value, saponification value, peroxide value, iodine value and moisture content. The experimental design adopted was 3 x 2 x 2 factorial randomized complete block design in three replicates. The data of chemical properties of extracted palm oil ...

  4. Geotechnical properties of crude oil contaminated sand

    International Nuclear Information System (INIS)

    Puri, V.K.; Das, B.M.; Cook, E.E.; Shin, E.C.

    1994-01-01

    Contamination of soil due to an oil spill influences its subsequent engineering behavior. An investigation was conducted to study the effect of crude oil contamination on compaction characteristics, shear strength, one-dimensional compression, and coefficient of permeability. Water permeability was also determined by using commercial grade motor oils as contaminants. The test results indicate that the compaction characteristics are influenced by oil contamination. The angle of internal friction of sand (based on total stress condition) decreases due to presence of oil within the pore spaces in sand. One dimensional compression characteristics of sand are significantly influenced by oil contamination resulting in a decrease in the value of constrained modulus with increase in the degree of oil contamination compared to the case of dry sand. Water permeability was observed to be a function of the initial viscosity and the degree of saturation due to the contaminating oil

  5. 7 CFR 1980.334 - Appraisal of property serving as collateral.

    Science.gov (United States)

    2010-01-01

    ... proposed loan will be completed and submitted to RHS for review with the request for loan guarantee. The... will be completed using the sales comparison (market) and cost approach to market value. (1) URAR. The... than three comparable sales, which are not more than 12 months old, will be used unless the appraiser...

  6. Geotechnical properties of oil-contaminated Kuwaiti sand

    International Nuclear Information System (INIS)

    Al-Sanad, H.A.; Eid, W.K.; Ismael, N.F.

    1995-01-01

    Large quantities of oil-contaminated sands resulted from exploded oil wells, burning oil fires, the destruction of oil storage tanks, and the formation of oil lakes in Kuwait at the end of the Gulf War. An extensive laboratory testing program was carried out to determine the geotechnical characteristics of this material. Testing included basic properties, compaction and permeability tests, and triaxial and consolidation tests on clean and contaminated sand at the same relative density. Contaminated specimens were prepared by mixing the sand with oil in the amount of 6% by weight or less to match field conditions. The influence of the type of oil, and relative density was also investigated by direct shear tests. The results indicated a small reduction in strength and permeability and an increase in compressibility due to contamination. The preferred method of disposal of this material is to use it as a stabilizing material for other projects such as road construction

  7. Geotechnical properties of oil-contaminated Kuwaiti sand

    Energy Technology Data Exchange (ETDEWEB)

    Al-Sanad, H.A.; Eid, W.K.; Ismael, N.F. [Kuwait Univ., Safat (Kuwait). Dept. of Civil Engineering

    1995-05-01

    Large quantities of oil-contaminated sands resulted from exploded oil wells, burning oil fires, the destruction of oil storage tanks, and the formation of oil lakes in Kuwait at the end of the Gulf War. An extensive laboratory testing program was carried out to determine the geotechnical characteristics of this material. Testing included basic properties, compaction and permeability tests, and triaxial and consolidation tests on clean and contaminated sand at the same relative density. Contaminated specimens were prepared by mixing the sand with oil in the amount of 6% by weight or less to match field conditions. The influence of the type of oil, and relative density was also investigated by direct shear tests. The results indicated a small reduction in strength and permeability and an increase in compressibility due to contamination. The preferred method of disposal of this material is to use it as a stabilizing material for other projects such as road construction.

  8. Determining the thermal and physicals properties of oil processing products

    Directory of Open Access Journals (Sweden)

    Viktoria I. Kryvda

    2015-03-01

    Full Text Available In the last decades both technological process’ improvement and primary energy resources saving are the main tasks of oil refineries. Using various oil products does impose an accurate knowledge of their properties. The dispersion analysis applied makes possible to construct a model simulating the primary oil refining products’ and raw materials’ thermal physical properties. As a result of data approximation there were obtained polynomials with coefficients differing from attributable to the studied oil products fractions. The research represents graphic dependences of thermal physical properties on temperature values for diesel oil fraction. The linear character of density and calorific capacity dependencies from temperature is represented with a proportional error in calculations. The relative minimum error is below 2% that confirms the implemented calculations’ adequacy. The resulting model can be used in calculations for further technological process improvements.

  9. IMPACT OF OIL ON THE MECHANICAL PROPERTIES OF SOIL SUBSIDENCE

    Directory of Open Access Journals (Sweden)

    Алексей Алексеевич Бурцев

    2016-08-01

    Full Text Available The paper studied the effect of oil content on the mechanical properties of soil subsidence - Ek modulus and compressibility factor m0, obtained in the laboratory with the help of artificial impregnation oil soil samples. A comparison of the above parameters with samples of the same soil in the natural and water-saturated conditions has been perfomed.

  10. Analysis of acidic properties of distribution transformer oil insulation ...

    African Journals Online (AJOL)

    This paper examined the acidic properties of distribution transformer oil insulation in service at Jericho distribution network Ibadan, Nigeria. Five oil samples each from six distribution transformers (DT1, DT2, DT3, DT4 and DT5) making a total of thirty samples were taken from different installed distribution transformers all ...

  11. Chemical composition and insecticidal properties of essential oil ...

    African Journals Online (AJOL)

    Purpose: To determine the insecticidal properties of essential oil from Mosla soochowensis aerial parts against two insect pests, Sitophilus zeamais and Tribolium castaneum. Methods: Hydro-distillation of M. soochowensis was used to extract the essential oil. Gas chromatography/mass spectrometry (GC/MS) analysis was ...

  12. Physico-chemical properties of oil from some selected underutilized ...

    African Journals Online (AJOL)

    ... Testing and Materials (ASTM) standard specifications for biodiesel production. In actual fact, the iodine values of palm kernel, groundnut, bambara groundnut, pumpkin, African oil bean and sesame, show that they could be used as lubricants and hydraulic brake fluid. Key words: Oil seeds, biodiesel, properties, extraction.

  13. Antioxidant properties of volatile oils obtained from Artemisia taurica ...

    African Journals Online (AJOL)

    In this study, the antioxidant properties of volatile oils obtained from the earth parts of the Artemisia taurica Willd. and Salvia kronenburgii Rech. Fil. plants and their effects on xanthine oxidase enzyme were studied. The chemical contents of each volatile oil were determined by applying gas chromatograpghy-mass ...

  14. Recycled palm oil spoilage: Correlation between physicochemical properties and oleophilicity

    Science.gov (United States)

    Kadir, Ili Afiqa Ab; Zubairi, Saiful Irwan; Jurid, Lailatul Syema

    2016-11-01

    Palm oil is widely used for domestic and commercial frying due to its techno-economic advantages as compared to other vegetable oils. However, if the oil is used beyond its recommended usage cycle, it might lead to oil spoilage. Therefore this study focuses on the comprehensive analysis of chemical and physical properties of recycled palm oil. Recycled palm oil was prepared by frying potato strips up to 4 batches; 5 cycles for each batch) was carried out with potato (g)-to-oil (ml) ratio of 3/20 prior to physico-chemical analysis (moisture content, color measurement, viscosity, density and iodine value. From 5 tests used to indicate physico-chemical properties of recycled palm oil, only color measurement, viscosity and IV shows results accordingly to theories. Whereas moisture content and density were not comply to theories. With increasing frying times, recycled palm oil color has been darker due to chemical reaction that occurs during frying. The trend line illustrates that with increasing frying times, recycled palm oil lightness decreases. It also means that its color has been darker. Meanwhile, b* rate increase indicating that recycled palm oil show tendency towards green color. Whereas, a* rate decreased, showing low tendency towards red color. Viscosity and moisture content increase with frying cycle. This situation occurred might be due to formation of hydrolysis products which are volatile while frying process. But the remaining non-volatile compounds among the hydrolysis products might also accumulate in palm oil and thus affect the total oil/fat chemical changes. Meanwhile the density of palm oil was quite constant at 0.15 g/cm3 except for cycle 2 with 0.17 g/cm3. The result obtained from this experiment were comply with previous study that stated frying batch number is a significant variable (a = 0.05) affecting the density of oil only after 20 frying batch. The contact angle of recycled palm oil on PHBV thin film was more than 90 °. Hence it shows

  15. Conference Proceedings: Structuring oil and gas property transactions

    International Nuclear Information System (INIS)

    1999-01-01

    The 12 presentations at this conference dealt with issues concerning the legal aspects of oil and gas property transaction agreements. Several issues regarding sales and purchase negotiations of oil and gas property are reviewed and some of the basic principles of contract law are explained. Advantages, disadvantages and opportunities of structuring oil and gas property acquisitions, as well as their tax consequences are also identified. The issue of risk assessment regarding environmental consequences and how public concerns regarding the state of the environment has had an impact on oil and gas transactions, is addressed. Interest in this topic stems from the fact that improved enforcement of existing laws regarding the environment can potentially make purchasers liable for significant costs associated with remediation or clean-up of contaminated properties. refs., tabs., figs

  16. Production, properties and utilisation of pyrolysis oil

    Energy Technology Data Exchange (ETDEWEB)

    Sipilae, K; Oasmaa, A; Arpiainen, V; Solantausta, Y; Leppaemaeki, E; Kuoppala, E; Levander, J; Kleemola, J; Saarimaeki, P [VTT Energy, Jyvaeskylae (Finland). Energy Production Technologies

    1997-12-01

    In this project VTT Energy co-ordinates the EU JOULE Project `Biofuel oil for power plants and boilers` supporting the development projects of Finnish enterprises, and participates in the Pyrolysis Project of IEA Bioenergy Agreement. Presently two pyrolysis devices with capacities of 150 g/h and 1 kg/h are used for the project. Hot gas filtering tests by using one ceramic candle equipment have been carried out with the 1 kg/h device for pyrolysis oil. The solids and alkali contents of the product oil were reduced clearly. Suitable conditions are being defined for continuous hot gas filtering. A PDU device of 20 kg/h is being commissioned. The main aim of the chemical characterisation of pyrolysis oil was to develop as simple a method as possible for differentiating pyrolysis oils and for finding correlations between the characteristics and behaviour of pyrolysis oils. Pyrolysis oils produced from various raw materials (hardwood, pine, straw) were analysed and compared with each other. VTT Energy participates in the pyrolysis network (EU/PYNE) of EU, the aim of which is to collect and disseminate research results of pyrolysis studies, i.e., through a journal with a wide circulation. VTT also participates in the pyrolysis activity of IEA (PYRA), the other partners being Great Britain, EU, Canada and the United States. I.e., quality criteria and improvement, occupational safety and pyrolysis kinetics are discussed in IEA/PYRA

  17. Measurement of Deterioration of Frying Oil Using Electrical Properties

    OpenAIRE

    羽倉, 義雄; 佐々木, 芳浩; 鈴木, 寛一

    2006-01-01

    In this study, the relationship between the electrical properties of frying oil (relative dielectric constant and conductance) and its deterioration indicators (acid value, amounts of polymerized triacylglycerols and chromaticity) were examined, focusing on the changes in electrical properties that accompany deterioration. The samples of frying oil used in this experiment were collected from fried food processing sites (school, hospital and factory feeding centers) and were collected at closi...

  18. Biosynthesis and therapeutic properties of Lavandula essential oil constituents.

    Science.gov (United States)

    Woronuk, Grant; Demissie, Zerihun; Rheault, Mark; Mahmoud, Soheil

    2011-01-01

    Lavenders and their essential oils have been used in alternative medicine for several centuries. The volatile compounds that comprise lavender essential oils, including linalool and linalyl acetate, have demonstrative therapeutic properties, and the relative abundance of these metabolites is greatly influenced by the genetics and environment of the developing plants. With the rapid progress of molecular biology and the genomic sciences, our understanding of essential oil biosynthesis has greatly improved over the past few decades. At the same time, there is a recent surge of interest in the use of natural remedies, including lavender essential oils, in alternative medicine and aromatherapy. This article provides a review of recent developments related to the biosynthesis and medicinal properties of lavender essential oils. © Georg Thieme Verlag KG Stuttgart · New York.

  19. Use of ultrasound to monitor physical properties of soybean oil

    Science.gov (United States)

    Baêsso, R. M.; Oliveira, P. A.; Morais, G. C.; Alvarenga, A. V.; Costa-Félix, R. P. B.

    2016-07-01

    The study of the monitoring physical properties of soybean oil was performed. The pulse-echo method allowed measuring the density and viscosity of the oil in real time and accurately. The physical property values were related to the acoustic time of flight ratio, dimensionless parameter that can be obtained from any reference. In our case, we used the time of flight at 20°C as reference and a fixed distance between the transducer and the reflector. Ultrasonic monitoring technique employed here has shown promising in the analysis of edible oils.

  20. Thermal properties and burning efficiency of crude oils and refined fuel oil

    DEFF Research Database (Denmark)

    van Gelderen, Laurens; Alva, Wilson Ulises Rojas; Mindykowski, Pierrick Anthony

    2017-01-01

    The thermal properties and burning efficiencies of fresh and weathered crude oils and a refined fuel oil were studied in order to improve the available input data for field ignition systems for the in-situ burning of crude oil on water. The time to ignition, surface temperature upon ignition, heat......-cooled holder for a cone calorimeter under incident heat fluxes of 0, 5, 10, 20, 30, 40 and 50 kW/m2. The results clearly showed that the weathered oils were the hardest to ignite, with increased ignition times and critical heat fluxes of 5-10 kW/m2. Evaporation and emulsification were shown...

  1. The properties of heavy oils and Orimulsion : another look

    International Nuclear Information System (INIS)

    Fingas, M.; Hollebone, B.; Wang, Z.; Smith, P.

    2003-01-01

    A comparison was made between the physical properties and behaviour indicators of several heavy oils, including Orimulsion. Most heavy oils are rich in resins, asphaltenes, heavy saturates and heavy aromatics and their behaviour may vary during spills due to their different densities. The authors examined the change in density with changes in weathering and temperature. The authors noted two phenomena associated with the behaviour of heavy oils in water, namely sinking and over-washing. Sinking was defined as the bulk sinking of oil to the bottom or an intermediate layer. Over-washing was described as the washing of a layer of water over dense oil at sea while the oil is still close to the surface. The problem with over-washing is that it is not always visible to observers from a ship. The authors briefly reviewed the literature on the topic of dense oil behaviour. To determine whether extensive weathering could render oils heavier than water, weathering experiments were performed on dense oils. Results showed that weathering is rarely a sole factor in the bulk sinking of oil. For the oil to sink after weathering, its density would have to be very close to that of water. Weathering studies have shown that little weathering occurs on sunken oil after it is submerged. The uptake of particulate matter is the most important process in increasing density. The authors also discussed sinking prediction equations and provided a mathematical description of the conditions required for oil to be covered by a layer of water. A summary of the dynamics of Orimulsion as measured in a test tank was also included. 21 refs., 3 tabs., 3 figs

  2. Looking For Value in All The Wrong Places. Toward Expanded Consideration of Green and High Performance Attributes in Non-residential Property Appraisals in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-10-21

    Large numbers of commercial buildings have sought to improve their energy and environmental performance, with half of all leasable U.S. offices now designated at some level of “green”. All proper/es fall somewhere on the green/high-­performance spectrum (above and below average) whether or not they bear a formal label or ra/ng.1 Variations in the level of performance can either positively or negatively influence value. This component of value can be shaped by many factors, from utility costs to tenant/owner preferences that translate into income (rent levels, vacancy rates, lease-­up /mes, etc.). Occupant perceptions of indoor environmental quality are another potential influence on value. While there has been little uptake of this thinking by practicing appraisers, the increased prevalence of green/HP practices combined with concerns about appraiser competency are compelling the industry to adapt their traditional techniques to this new driver of value. However, the overly narrow focus of policymakers on appraisal of labeled or rated exemplary buildings (e.g., LEED or ENERGY STAR Certified) represents a significant missed opportunity. Any level of green or energy performance can in fact influence value, including below-­average performance (a.k.a. “brown discount”), irrespec/ve of whether or not the building has been formally rated. Another surmountable challenge is the limitations to non-­appraisers’ understanding of the appraisal process (and constraints therein). A crucial byproduct of this is unrealistic expectations of what appraisers can and will do in the marketplace. This report identifies opportunities for catalyzing improvement of the green/HP appraisal process, which apply to all involved actors—from owner, report-­ordering client, the appraiser, and the appraisal reviewer—and fostering more demand for appraisals that recognize green/HP property attributes. The intended audience is primarily the public policy community and other

  3. Environmentally friendly properties of vegetable oil methyl esters

    Directory of Open Access Journals (Sweden)

    Gateau Paul

    2005-07-01

    Full Text Available Measurements were carried out on Vegetable Oil Methyl Esters (VOME or FAME answering the most recent specifications. The products tested are RME (Rapeseed oil Methyl Ester, ERME (Erucic Rapeseed oil Methyl Esters, SME (Sunflower oil Methyl Esters, and HOSME (High Oleic Sunflower oil Methyl Esters. They contain more than 99.5% of fatty acid mono esters. The compositions are given. VOME are not volatile and they are not easily flammable. They are not soluble in water and they are biodegradable. According to the methods implemented for the determination of the German classification of substances hazardous to waters WGK, they are not toxic on mammals and unlike diesel fuel they are not toxic on fish, daphnia, algae and bacteria. The RME is not either toxic for shrimps. According to tests on rabbits, RME and SME are not irritating for the skin and the eyes. VOME display particularly attractive environmental properties.

  4. Polylactic Acid?Lemongrass Essential Oil Nanocapsules with Antimicrobial Properties

    OpenAIRE

    Liakos, Ioannis L.; Grumezescu, Alexandru Mihai; Holban, Alina Maria; Florin, Iordache; D?Autilia, Francesca; Carzino, Riccardo; Bianchini, Paolo; Athanassiou, Athanassia

    2016-01-01

    Polylactic acid was combined with lemongrass essential oil (EO) to produce functional nanocapsules (NCs). The obtained polylactic acid nanoparticles showed antimicrobial activity both with and without the presence of lemongrass oil; however, the presence of EO improved the activity of the NCs. The presence of lemongrass assisted the formation of well-separated NCs and also provided enhanced antimicrobial properties, since lemongrass is known for its antimicrobial character. Fluorescence micro...

  5. Antioxidant and antibacterial properties of the Melissa officinalis essential oil

    Directory of Open Access Journals (Sweden)

    R. Mahmodi

    2016-06-01

    Full Text Available Background: Increasing drug resistance in microorganisms and concerns for side effects of chemical preservatives, especially in the food industry, have led to extensive studies on novel potential agents with natural origin. Objective: The aim of this study was to determine the antioxidant and antibacterial properties of the Melissa officinalis essential oil. Methods: This experimental study was carried out at Islamic Azad University, Saveh Branch in 2012-2013. The essential oil was extracted from different parts of the plant (leaves, stem and flower by hydrodistillation. The essential oil was phytochemically characterized by gas chromatography-mass spectrometry (GC-MS analysis. Antibacterial properties were examined by disc diffusion and microtiter plates. Antioxidant activity was examined by diphenyl-picryl-hydrazyl (DPPH assay. Findings: E-Citral in leaves, 2-Cyclohexen-1-one, 2-methyl-5-(1-methylethenyl in stem, and Trans-Carveol in flower were the major components identified in the Melissa officinalis. Among different parts essential oil, the highest and the lowest antibacterial activity were related to leaves and stem, respectively. The largest diameter of the inhibition growth zone for Staphylococcus aureus and Pseudomonas aeruginosa was related to the leaves essential oil. The highest antioxidant activity was related to the leaves essential oil in DPPH assay. Conclusion: With regards to the results, the Melissa officinalis essential oil can be used as a natural preservative for increasing the shelf life of foods.

  6. A Study of the Properties of Electrical Insulation Oils and of the Components of Natural Oils

    Directory of Open Access Journals (Sweden)

    Milan Spohner

    2012-01-01

    Full Text Available This paper presents a study of the electrical and non-electrical properties of insulating oils. For the correct choice of an electrical insulation oil, it is necessary to know its density, dynamic viscosity, dielectric constant, loss number and conductivity, and the effects of various exposure factors. This paper deals with mathematical and physical principles needed for studying and making correct measurements of the dynamic viscosity, density and electrical properties of insulation oils. Rheological properties were measured using an A&D SV-10 vibratory viscometer, and analytical balance with density determination kit, which operates on the principle of Archimedes’ law. Dielectric properties were measured using a LCR meter Agilent 4980A with connected with the Agilent 16452A test fixture for dielectric liquids.

  7. Comparative antioxidative properties of selected seed oils

    Czech Academy of Sciences Publication Activity Database

    Číž, Milan; Gorinstein, S.; Lojek, Antonín; Martin-Belloso, A.; Leontowich, H.; Trakhtenberg, S.

    2002-01-01

    Roč. 36, Suppl. 1 (2002), s. 64-65 ISSN 1071-5762. [European Research on Functional Effects of Dietary Antioxidants: Benefits and Risks. Cambridge, 25.09.02-28.09.02] R&D Projects: GA AV ČR(CZ) IAB6004204 Institutional research plan: CEZ:AV0Z5004920 Keywords : antioxidants * polyphenols * seed oils Subject RIV: BO - Biophysics Impact factor: 2.523, year: 2002

  8. Appraisal Report

    DEFF Research Database (Denmark)

    Schleimann, Finn; Enemark, Ulrika; Vagnby, Bo Hellisen

    Appraisal of continued support to Ghana's health sector for a third phase covering 2003 - 2007. Funding recommended with DKK 340 million over five years.......Appraisal of continued support to Ghana's health sector for a third phase covering 2003 - 2007. Funding recommended with DKK 340 million over five years....

  9. 7 CFR 4279.144 - Appraisals.

    Science.gov (United States)

    2010-01-01

    ... value of the collateral. All real property appraisals associated with Agency guaranteed loanmaking and... appraise the property in question. All appraisals will include consideration of the potential effects from... value of the collateral. For additional guidance and information concerning the completion of real...

  10. Study on the basic properties of Indonesian oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qing; Jiang, Qian-qian; Bai, Jing-ru; Sun, Jian; Liu, Hong-peng [Northeast Dianli Univ., Jilin (China). Inst. of Energy and Power Engineering

    2013-07-01

    The basic properties of three Indonesian oil sands have been investigated. The results show that since the high content of volatile, heating value and oil yield, Indonesian oil sands could be combusted for power generation and retorting for oil refining. Moreover, oil sand ash with the low content of fixed carbon and high content of CaO, could not only be used as solid heat carrier during retorting, but also comprehensively used as construction material. Based on the thermogravimeric analysis (TGA), pyrolysis and combustion behaviors have been identified. As for pyrolysis, 350-520 C could be regarded as the major oil-producing region, the apparent activation energy E is not a constant obtained by distributed activation energy model (DAEM). For combustion, 620-800 C is the high-temperature oxidation (HTO) stage. TG-DTG extrapolation method was applied to determine the combustion characteristics parameters such as ignition temperature, burn-out temperature, combustion stability and combustion reactivity, and finally gave a comparison with those of oil shale and coal.

  11. Dielectric Properties of Flocculated Water-in-Oil Emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Skodvin, T.

    1995-12-31

    When an offshore oil field is near completion, water occupies a large fraction of the available pore volume. Thus, in collecting the oil and gas reserves, one has to deal with a high co-production of either formation- or injected water. This doctoral thesis focuses on the effect of water-in-oil emulsions on the dielectric properties, in particular the effect of flocculation. Various dielectric models are applied to obtain methods for qualitative and quantitative characterization of the flocculated state. Permittivity and measurement of dielectric properties are discussed as a basis for the interpretation of the dielectric properties of the emulsions. Various flocculation models are presented. It is concluded that the dielectric properties of water-in-oil emulsions are strongly influenced by continuously ongoing processes in the system. Because of flocculation and sedimentation the traditional dielectric mixture models cannot satisfactorily predict the dielectric behaviour. The experimentally obtained permittivities for the emulsions can be reproduced by including flocculation in the models and treating the floc aggregates as spheroids or subsystems with dielectric properties given by the degree of flocculation. The models discussed have difficulties reproducing the complete frequency behaviour found experimentally. This is probably because the dielectric relaxation may be influenced by processes not included in the models, such as the effects of dipolar or multipolar interactions between the droplets. For further research it is recommended that rheological and dielectric measurements be combined. 227 refs., 61 figs., 16 tabs.

  12. Dielectric Properties of Flocculated Water-in-Oil Emulsions

    Energy Technology Data Exchange (ETDEWEB)

    Skodvin, T

    1996-12-31

    When an offshore oil field is near completion, water occupies a large fraction of the available pore volume. Thus, in collecting the oil and gas reserves, one has to deal with a high co-production of either formation- or injected water. This doctoral thesis focuses on the effect of water-in-oil emulsions on the dielectric properties, in particular the effect of flocculation. Various dielectric models are applied to obtain methods for qualitative and quantitative characterization of the flocculated state. Permittivity and measurement of dielectric properties are discussed as a basis for the interpretation of the dielectric properties of the emulsions. Various flocculation models are presented. It is concluded that the dielectric properties of water-in-oil emulsions are strongly influenced by continuously ongoing processes in the system. Because of flocculation and sedimentation the traditional dielectric mixture models cannot satisfactorily predict the dielectric behaviour. The experimentally obtained permittivities for the emulsions can be reproduced by including flocculation in the models and treating the floc aggregates as spheroids or subsystems with dielectric properties given by the degree of flocculation. The models discussed have difficulties reproducing the complete frequency behaviour found experimentally. This is probably because the dielectric relaxation may be influenced by processes not included in the models, such as the effects of dipolar or multipolar interactions between the droplets. For further research it is recommended that rheological and dielectric measurements be combined. 227 refs., 61 figs., 16 tabs.

  13. Thiolated silicone oil: Synthesis, gelling and mucoadhesive properties

    Science.gov (United States)

    Partenhauser, Alexandra; Laffleur, Flavia; Rohrer, Julia; Bernkop-Schnürch, Andreas

    2015-01-01

    The aim of this study was the development of novel thiolated silicone oils and their evaluation with regard to gelling and mucoadhesive properties. A thiol coupling of 220 ± 14 and 127 ± 33 μmol/g polymer for 3-mercaptopropionic acid (MPA)- and cysteine-coupled silicone oil was determined, respectively. The dynamic viscosity of MPA–silicone raised significantly (p Thiolated silicone oils can be regarded superior in comparison to commonly used silicone oils due to a prolonged retention time in the small intestine as site of action. Gelling and mucoadhesive features are advantageous for antiflatulent as well as mucoprotective biomaterials. Thus, these novel thiomers seem promising for an upgrade of currently available products for the treatment of dyspepsia, reflux oesophagitis and even inflammatory bowel diseases such as ulcerative colitis or Crohn’s disease. PMID:25660565

  14. Combustion Properties of Biomass Flash Pyrolysis Oils: Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    C. R. Shaddix; D. R. Hardesty

    1999-04-01

    Thermochemical pyrolysis of solid biomass feedstocks, with subsequent condensation of the pyrolysis vapors, has been investigated in the U.S. and internationally as a means of producing a liquid fuel for power production from biomass. This process produces a fuel with significantly different physical and chemical properties from traditional petroleum-based fuel oils. In addition to storage and handling difficulties with pyrolysis oils, concern exists over the ability to use this fuel effectively in different combustors. The report endeavors to place the results and conclusions from Sandia's research into the context of international efforts to utilize pyrolysis oils. As a special supplement to this report, Dr. Steven Gust, of Finland's Neste Oy, has provided a brief assessment of pyrolysis oil combustion research efforts and commercialization prospects in Europe.

  15. Effect of fast pyrolysis bio-oil from palm oil empty fruit bunch on bitumen properties

    Science.gov (United States)

    Poh, Chia Chin; Hassan, Norhidayah Abdul; Raman, Noor Azah Abdul; Shukry, Nurul Athma Mohd; Warid, Muhammad Naqiuddin Mohd; Satar, Mohd Khairul Idham Mohd; Ros Ismail, Che; Asmah Hassan, Sitti; Mashros, Nordiana

    2018-04-01

    Bitumen shortage has triggered the exploration of another alternative waste material that can be blended with conventional bitumen. This study presents the performance of pyrolysis bio-oil from palm oil empty fruit bunch (EFB) as an alternative binder in modified bitumen mixtures. The palm oil EFB was first pyrolyzed using auger pyrolyzer to extract the bio-oil. Conventional bitumen 80/100 penetration grade was used as a control sample and compared with samples that were modified with different percentages, i.e., 5% and 10%, of pyrolysis EFB bio-oil. The physical and rheological properties of the control and modified bitumen samples were investigated using penetration, softening point, viscosity and dynamic shear rheometer (DSR) tests. Results showed that the addition of EFB bio-oil softened the bitumen with high penetration and a reduction in softening point, penetration index, and viscosity. However, the DSR results showed a comparable rutting resistance between the bitumen samples containing EFB bio-oil and virgin bitumen with a failure temperature achieved greater than 64°C.

  16. Physical Properties And Maize Production In A Spent Oil ...

    African Journals Online (AJOL)

    Information on the use of plant species and organic nutrients to improve the physical properties of oil-contaminated soil, with a view to making it conducive for crop production, is very important. Three legumes (Gliricidia sepium, Leucenae leucocephala and Calapogonium caeruleam) combined or not with poultry manure ...

  17. Some properties of Suncor oil sands tailings

    Energy Technology Data Exchange (ETDEWEB)

    Guo, C.; Wells, P.S. [Suncor Energy, Fort McMurray, AB (Canada)

    2010-07-01

    This PowerPoint presentation discussed a pond assessment program conducted by Suncor to determine the properties of mature fine tailings (MFT) and composite tailings (CT) at reclaimed and unreclaimed sites. Mudline and sonar depth sounding techniques were used to determine solids contents. A wire line sampler provided point depth samples used for laboratory analyses. Continuous drill samples were obtained in order to characterize bottom fines and clay content. A flow penetration tests was used to determine the undrained shear strength of the soft tailings. A 3-D block model was then used to estimate soft material properties and to generate material distribution volumes and tonnages for different property ranges. The study showed that the block modelling techniques provide a more accurate tailings pond assessment than traditional approaches. While slow, ongoing static consolidation was observed, surface capping and artificial dewatering are required to provide trafficable ground for the final reclamation of the sites. tabs., figs.

  18. Antifungal Properties of Chenopodium ambrosioides Essential Oil Against Candida Species

    Directory of Open Access Journals (Sweden)

    Gerard Vilarem

    2010-09-01

    Full Text Available The essential oil of the aerial part (leaves, flowers and stem of Chenopodium ambrosioides was obtained by hydrodistillation and its chemical composition analyzed by GC and GC/MS, which permitted the identification of 14 components, representing 98.8% of the total oil. Major components were α-terpinene (51.3%, p-cymene (23.4% and p-mentha-1,8-diène (15.3%. The antifungal properties of this essential oil were investigated in vitro by the well diffusion and broth microdilution methods. The in vitro antifungal activity was concentration dependent and minimum inhibitory concentration values varied from 0.25 to 2 mg/mL. The in vivo antifungal activity was evaluated on an induced vaginal candidiasis rat model. The in vivo activity of the oil on mice vaginal candidiasis was not dose-dependent. Indeed, all the three tested doses; 0.1%, 1% and 10% led to the recovery of mice from the induced infection after 12 days of treatment. The effect of the essential oil on C. albicans ATCC 1663 fatty acid profile was studied. This oil has a relatively important dose-dependent effect on the fatty acids profile.

  19. Novel edible oil sources: Microwave heating and chemical properties.

    Science.gov (United States)

    Hashemi, Seyed Mohammad Bagher; Mousavi Khaneghah, Amin; Koubaa, Mohamed; Lopez-Cervantes, Jaime; Yousefabad, Seyed Hossein Asadi; Hosseini, Seyedeh Fatemeh; Karimi, Masoumeh; Motazedian, Azam; Asadifard, Samira

    2017-02-01

    The aim of this work was to investigate the effect of various microwave heating times (1, 3, 5, 10, and 15min) on the chemical properties of novel edible oil sources, including Mashhadi melon (Cucumis melo var. Iranians cv. Mashhadi), Iranian watermelon (Citrullus lanatus cv. Fire Fon), pumpkin (Cucurbita pepo subsp. pepo var. Styriaca), and yellow apple (Malus domestica cv. Golden Delicious) seed oils. The evaluated parameters were peroxide value (PV), conjugated diene (CD) and triene (CT) values, carbonyl value (CV), p-anisidine value (AnV), oil stability index (OSI), radical scavenging activity (RSA), total tocopherols, total phenolics, as well as chlorophyll and carotenoid contents. Results showed that extended microwave heating involves decreased quality of the seed oils, mainly due to the formation of primary and secondary oxidation products. Microwave heating time also affects the total contents of chlorophylls, carotenoids, phenolics and tocopherols, which clearly decrease by increasing the exposure time. The order of oxidative stability of the analyzed edible oils was pumpkin>Mashhadi melon>Iranian watermelon>yellow apple. The obtained results demonstrated the promising potential of these novel edible oils for different food applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Physicochemical Properties of Malaysian Jatropha curcas Seed Oil

    International Nuclear Information System (INIS)

    Jumat Salimon; Rozaini Abdullah

    2008-01-01

    Jatropha curcas oil was extracted using n-hexane as solvent in the Soxhlet extraction method. The physicochemical properties of Malaysian Jatropha curcas oil were evaluated. The result showed that the Jatropha seeds consist of 60% (dry w/ w) crude oil. The physicochemical properties showed that the seed oil contained low moisture level of 0.02±0.01%, acid value (1.50±0.07%), iodine value (91.70±1.44 mg/ g), peroxide value (0.66±0.04 miliequivalence/ kg) and saponification value of 208.5±0.47 mg/ g respectively. Gas chromatography analysis showed that oleic acid (46.00±0.19%) appears as dominant fatty acid in seed oil followed by linoleic acid (31.96±0.19%) and palmitic acid (13.89±0.06%). High performance liquid chromatography (HPLC) results showed that the dominant triacylglycerols present were PLL (22.00%), POP(16.48%), 000(16.48%), 00L(16.23%) and OLL(13.00%). (author)

  1. Polylactic Acid-Lemongrass Essential Oil Nanocapsules with Antimicrobial Properties.

    Science.gov (United States)

    Liakos, Ioannis L; Grumezescu, Alexandru Mihai; Holban, Alina Maria; Florin, Iordache; D'Autilia, Francesca; Carzino, Riccardo; Bianchini, Paolo; Athanassiou, Athanassia

    2016-07-07

    Polylactic acid was combined with lemongrass essential oil (EO) to produce functional nanocapsules (NCs). The obtained polylactic acid nanoparticles showed antimicrobial activity both with and without the presence of lemongrass oil; however, the presence of EO improved the activity of the NCs. The presence of lemongrass assisted the formation of well-separated NCs and also provided enhanced antimicrobial properties, since lemongrass is known for its antimicrobial character. Fluorescence microscopy was used to optically observe the nanoparticles and NCs and revealed the attachment of lemongrass oil with the polylactic acid NCs. Dynamic light scattering was used to determine their size. UV absorption was used to determine the exact amount of lemongrass oil found in the polylactic acid-lemongrass oil NCs, which was important for understanding the minimum inhibitory concentration for the antimicrobial experiments. A series of clinically important microbial species were used in the study and the obtained NCs proved to have very good antimicrobial properties against all tested strains. Such NCs can be used for the design of ecological strategies, based on natural alternatives, which may be efficient against severe infections, including those that involve resistant pathogens and biofilms or those with difficult to reach localization.

  2. Polylactic Acid—Lemongrass Essential Oil Nanocapsules with Antimicrobial Properties

    Directory of Open Access Journals (Sweden)

    Ioannis L. Liakos

    2016-07-01

    Full Text Available Polylactic acid was combined with lemongrass essential oil (EO to produce functional nanocapsules (NCs. The obtained polylactic acid nanoparticles showed antimicrobial activity both with and without the presence of lemongrass oil; however, the presence of EO improved the activity of the NCs. The presence of lemongrass assisted the formation of well-separated NCs and also provided enhanced antimicrobial properties, since lemongrass is known for its antimicrobial character. Fluorescence microscopy was used to optically observe the nanoparticles and NCs and revealed the attachment of lemongrass oil with the polylactic acid NCs. Dynamic light scattering was used to determine their size. UV absorption was used to determine the exact amount of lemongrass oil found in the polylactic acid—lemongrass oil NCs, which was important for understanding the minimum inhibitory concentration for the antimicrobial experiments. A series of clinically important microbial species were used in the study and the obtained NCs proved to have very good antimicrobial properties against all tested strains. Such NCs can be used for the design of ecological strategies, based on natural alternatives, which may be efficient against severe infections, including those that involve resistant pathogens and biofilms or those with difficult to reach localization.

  3. Oil-structuring characterization of natural waxes in canola oil oleogels: Rheological, thermal, and oxidative properties

    Science.gov (United States)

    Natural waxes (candelilla wax, carnauba wax, and beeswax) were utilized as canola oil structurants to produce oleogels and their physicochemical properties were evaluated from rheological, thermal, and oxidative points of view. The oleogels with candelilla wax exhibited the highest hardness, followe...

  4. Study of fuel properties of rubber seed oil based biodiesel

    International Nuclear Information System (INIS)

    Ahmad, Junaid; Yusup, Suzana; Bokhari, Awais; Kamil, Ruzaimah Nik Mohammad

    2014-01-01

    Graphical abstract: - Highlights: • This article presents the comparative studies of the fuel properties of rubber seed oil based biodiesel. • The design expert has been adopted for the optimization of the process variables. • The FTIR, cold flow properties and oxidation stability are the findings of present study. • All the fuel properties met the standards such as ASTM D6751 and EN 14214. • Present study reveals that rubber seed oil as a non-edible source potentially contributes for esters production. - Abstract: The scarcity of the fossil fuel, environmental pollution and food crisis are the world’s major issues in current era. Biodiesel is an alternative to diesel fuel, environment friendly and biodegradable and is produced from either edible or non-edible oils. In this study, a non-edible rubber seed oil (RSO) with high free fatty acid (FFA) content of 45% were used for the production of biodiesel. The process comprises of two steps. The first step is the acid esterification to reduce the FFA value and the second step is the base transesterification. The response surface methodology (RSM) was used for parametric optimization of the two stage processes i.e. acid esterification and base transesterification. The yield of biodiesel was analyzed using gas chromatography. The FTIR (Fourier Transform Infra-Red) spectrum was also determined to confirm the conversion of fatty acid to methyl esters. The fuel properties were analyzed according to the ASTM D6751 and EN14214 and were compared with the previous finding of researchers. All analyzed properties fulfilled the biodiesel standard criteria

  5. Comparative evaluation of physicochemical properties of jatropha curcas seed oil for coolant-lubricant application

    Science.gov (United States)

    Murad, Muhamad Nasir; Sharif, Safian; Rahim, Erween Abd.; Abdullah, Rozaini

    2017-09-01

    Increased attention to environmental issues due to industrial activities has forced the authorities raise awareness and implement regulations to reduce the use of mineral oil. Some vegetable oils unexplored or less explored, particularly the non-edible oils such as Jatropha curcas oil (JCO) and others. Physicochemical properties of JCO is compared with others edible oils, synthetic ester and fatty alcohol to obtain a viable alternative in metal cutting fluids. The oil was found to show the suitability of properties for coolant-lubricant applications in term of its physicochemical properties and better in flash point and viscosity value.

  6. Role of interfacial rheological properties in oil field chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Lakatos-Szabo, J.; Lakatos, I.; Kosztin, B.

    1996-12-31

    Interfacial rheological properties of different Hungarian crude oil/water systems were determined in wide temperature and shear rate range and in presence of inorganic electrolytes, tensides, alkaline materials and polymers. The detailed laboratory study definitely proved that the interfacial rheological properties are extremely sensitive parameters towards the chemical composition of inmiscible formation liquids. Comparison and interpretation of the interfacial rheological properties may contribute significantly to extension of the weaponry of the reservoir characterization, better understanding of the displacement mechanism, development of the more profitable EOR/IOR methods, intensification of the surface technologies, optimization of the pipeline transportation and improvement of the refinery operations. It was evidenced that the interfacial rheology is an efficient and powerful detection technique, which may enhance the knowledge on formation, structure, properties and behaviour of interfacial layers. 17 refs., 18 figs., 2 tabs.

  7. Effect of Replacing Pork Fat with Vegetable Oils on Quality Properties of Emulsion-type Pork Sausages

    OpenAIRE

    Lee, Hyun-Jin; Jung, Eun-Hee; Lee, Sang-Hwa; Kim, Jong-Hee; Lee, Jae-Joon; Choi, Yang-II

    2015-01-01

    This study was conducted to evaluate the quality properties of emulsion-type pork sausages when pork fat is replaced with vegetable oil mixtures during processing. Pork sausages were processed under six treatment conditions: T1 (20% pork fat), T2 (10% pork fat + 2% grape seed oil + 4% olive oil + 4% canola oil), T3 (4% grape seed oil + 16% canola oil), T4 (4% grape seed oil + 4% olive oil + 12% canola oil), T5 (4% grape seed oil + 8% olive oil + 8% canola oil), and T6 (4% grape seed oil + 12%...

  8. Evaluation of the Lubricating Properties of Palm Kernel Oil

    Directory of Open Access Journals (Sweden)

    John J MUSA

    2009-07-01

    Full Text Available The search for renewable energy resources continues to attract attention in recent times as fossil fuels such as petroleum, coal and natural gas, which are been used to meet the energy needs of man are associated with negative environmental impacts such as global warming. Biodiesel offered reduced exhaust emissions, improved biodegradability, reduced toxicity and higher carotene rating which can improve performance and clean up emissions. Standard methods were used to determine the physical and chemical properties of the oil, which includes the Density, Viscosity, flash/fire point, carbon residue, volatility and Specific Gravity were determined by chemical experimental analysis. The flash/fire points of the Heavy duty oil (SAE 40 and Light duty oil (SAE 30 is 260/300(°C and 243/290(°C respectively while the pour points of the samples are 22°C for palm kernel oil while 9°C and 21°C for SAE 40and SAE 30 respectively.

  9. Appraisal of pressmud and inorganic fertilizers on soil properties yield and sugarcane quality

    International Nuclear Information System (INIS)

    Sarwar, M.A.; Ibrahim, M.; Tahir, M.; Ahmad, K.; Khan, Z.I.; Valeem, E.E.

    2010-01-01

    A field experiment was conducted under semi-arid climatic conditions to evaluate the response of pressmud in combination with inorganic fertilizers and alone (only inorganic fertilizers) on the yield and sugarcane quality parameters besides a value-added product (locally called Gur). It is obvious from the results that inorganic fertilizer use (T2) has increased the tillers per plant, number of millable canes, stripped cane yield, sugar yield and juice present cane by 38.95 %, 38.66 %, 51.96 %, 54.92 % and 21.9 5% respectively, over the control (T1). Similarly when higher dose of pressmud was applied in integration with inorganic fertilizers (in T3), it increased total soluble solids, sucrose, purity, CSS and sugar recovery of juice by 7.83 %, 10.42 %, 2.80 %, 12.06 %, and 12.07 %, over the control (T1). The studies concluded that higher doses of mineral fertilizers increased gur % juice but it did not improve gur quality as done by higher doses of organic manures. Soil properties were also investigated before and after crop harvest. Maximum fertilizer use efficiency (124.29) was recorded in T2. (author)

  10. Statistical properties of country risk ratings under oil price volatility: Evidence from selected oil-exporting countries

    International Nuclear Information System (INIS)

    Liu, Chang; Sun, Xiaolei; Chen, Jianming; Li, Jianping

    2016-01-01

    This paper focuses on the application of panel models for identification and analysis of influence of oil price volatility on statistical properties of country risk ratings which stem from uncertainty of macroeconomic fluctuations. Firstly, two statistical properties of country risk ratings, volatility clustering and asymmetrical revision were identified in a theoretical framework based on Cruces (2006). Secondly, considering the oil price volatility, numerical experiments were conducted based on extended models to test and verify specific properties of country risk ratings in selected oil-exporting countries. Empirical results suggest that properties of country risk remain comparatively steady despite oil price volatility. It is also found that the oil price volatility can obviously exaggerate the country risk volatility, as it happened during 2007–2009. Country clustering based on the properties of country risk ratings shows that the selected countries maintain a significant clustering tendency. These features are of great importance for estimating risk exposure of international trade and investments in oil export during extreme situations. - Highlights: •Relationship between oil price volatility and country risk is the focus. •An extended model based on Cruces (2006) is proposed. •Volatility clustering and asymmetrical revision of country risk ratings is explored. •Oil price volatility can obviously exaggerate properties of country risk volatility.

  11. Artemisia spicigera Essential Oil: Assessment of Phytochemical and Antioxidant Properties

    Directory of Open Access Journals (Sweden)

    Ghajarbeygi

    2015-11-01

    Full Text Available Background Essential oils (EO, also called volatile odoriferous oil, are aromatic oily liquids extracted from different parts of plants. In general, the constituents in EOs are terpenes, aromatic compounds (aldehyde, alcohol, phenol, methoxy derivatives, and so on, and terpenoids (isoprenoids. Essential Oils have been known to possess antioxidant and antimicrobial activities, thereby serving as natural additives in foods and food products. Objectives The aim of this study was to assess the quantity and quality of compounds, with active chemical and antioxidant properties, of Artemisia spicigera essential oil (EO due to the effect of geographic location and season of harvest on the phenolic compounds of the plant. The plant was collected from east Azarbayjan province, Iran (both before and after the flowering stage. Materials and Methods A. spicigera EO was analyzed by gas chromatogram/mass spectrometry (GC-MS. The antioxidant activity and total phenolic content before and after flowering were evaluated by the Folin Ciocalteu method. Also, the yields of essential oil as a percentage based on the level of dry plant and the volume of extracted oil was determined. Results Analysis of A. spicigera EO by gas chromatogram-mass spectrometry showed that spachulenol 1 H cycloprop (18.39% and bicyclo hexan-3-en, 4-met (26.16%, were the prominent EOs of Artemisia before and after the flowering stage; the total phenolic EO before and after the flowering stage was 23.61 ± 1.08 µg/mL and 17.71 ± 0.9 µg/mL, respectively. Also level of flavonoid content before and after the flowering stage was 37.27 ± 1.70 µg/mL and 29.04 ± 1.30 µg/mL, respectively. This EO was able to reduce the stable free radical 2, 2-diphenol,1-picryl hydrazyl (DPPH with an IC50 of 86.14 ± 2.23 and 96.18 ± 2.61 µg/mL, before and after flowering, respectively. Yield of EO before and after flowering was 0.5% and 0.6%, respectively. Conclusions Results have shown that A. spicigera EO

  12. Study of physical and tribology properties of soybean oil-based grease formulated with polysoap

    Science.gov (United States)

    Soybean oil-based grease formulated with polysoaps, which was synthesized from polymeric epoxdized soybean oil, was investigated. Greases were prepared using a mixture of lithium soap and triethanolammonium polysoap. Grease properties investigated were: hardness, using cone penetration procedure (AS...

  13. Effects of fatty acids composition and microstructure properties of fats and oils on textural properties of dough and cookie quality.

    Science.gov (United States)

    Devi, Amita; Khatkar, B S

    2018-01-01

    This study was carried out to investigate the effect of fatty acid composition and microstructure properties of fats and oils on the textural properties of cookie dough and quality attributes of cookies. Fatty acid composition and microstructure properties of six fats and oils (butter, hydrogenated fat, palm oil, coconut oil, groundnut oil, and sunflower oil) were analyzed. Sunflower oil was found to be the most unsaturated oil with 88.39% unsaturated fatty acid content. Coconut oil and palm oil differed from other fats and oils by having an appreciable amount of lauric acid (59.36%) and palmitic acid (42.14%), respectively. Microstructure size of all fats and oils ranged from 1 to 20 μm being the largest for coconut oil and the smallest for palm oil. In palm oil, small rod-shaped and randomly arranged microstructures were observed, whereas sunflower oil and groundnut oil possessed large, scattered ovule shaped microstructures. It was reported that sunflower oil produced the softest dough, the largest cookie spread and the hardest cookie texture, whereas hydrogenated fat produced the stiffest dough, the lowest spread and most tender cookies. Statistical analysis depicted that palmitic acid and oleic acid demonstrated a positive correlation with dough hardness. Linoleic acid exhibited positive link with cookie spread ratio (r = 0.836**) and breaking strength (r = 0.792**). Microstructure size showed a significant positive relationship with dough density (r = 0.792**), cookie density (r = 0.386*), spread ratio (r = 0.312*), and breaking strength (r = 0.303*).

  14. Change in mechanical properties of Antrim oil shale on retorting

    Energy Technology Data Exchange (ETDEWEB)

    Singh, S. P.; Hockings, W. A.; Kim, K.

    1979-01-01

    The decomposition of kerogen in oil shale and subsequent extraction of the decomposition products during the retorting process are known to alter the pore structure, resulting in changes in permeability, deformation and strength properties. Prediction of these changes is of fundamental importance in the design of in-situ retorting processes. This paper summarizes a comprehensive laboratory investigation on the changes in mechanical properties of Antrim oil shale on retorting at 500/sup 0/C. It was observed that kerogen plays an important role in the change of the properties on retorting. When subjected to heat, the degree of deformation, the extent of fracturing and the structural instability of the specimens appeared to be strongly dependent upon kerogen content. The values of elastic modulus, strength, and density decreased whereas maximum strain at failure increased on retorting. Significant increases in permeability and porosity also resulted from retorting. The most pronounced increase was observed in the permeability in the direction parallel to bedding which exceeded in some cases as much as 3 orders of magnitude. Microscopic observations of pore structures provided a qualitative support to data obtained in measurements of porosity and permeability.

  15. Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber

    Science.gov (United States)

    Gunawan, Fergyanto E.; Homma, Hiroomi; Brodjonegoro, Satryo S.; Hudin, Afzer Bin Baseri; Zainuddin, Aryanti Binti

    In tropical countries such as Indonesia and Malaysia, the empty fruit bunches are wastes of the oil palm industry. The wastes are abundantly available and has reached a level that severely threats the environment. Therefore, it is a great need to find useful applications of those waste materials; but firstly, the mechanical properties of the EFB fiber should be quantified. In this work, a small tensile test machine is manufactured, and the tensile test is performed on the EFB fibers. The results show that the strength of the EFB fiber is strongly affected by the fiber diameter; however, the fiber strength is relatively low in comparison to other natural fibers.

  16. Polymercaptanized soybean oilproperties and tribological characterization

    Science.gov (United States)

    Polymercaptanized vegetable oils are produced in industrial scale by the addition of hydrogen sulfide across double bonds or epoxides of vegetable oils, in the presence of UV-light. To date, soybean oil, epoxidized soybean oil, and castor oil has been mercaptanized using such a procedure. Depending ...

  17. Thermophysical properties of conjugated soybean oil/corn stover biocomposites.

    Science.gov (United States)

    Pfister, Daniel P; Larock, Richard C

    2010-08-01

    Novel "green composites" have been prepared using a conjugated soybean oil-based resin and corn stover as a natural fiber. Corn stover is the residue remaining after grain harvest and it is estimated that approximately 75 million tons are available annually in the United States. The effect of the amount of filler, the length of the fiber, and the amount of the crosslinker on the structure and thermal and mechanical properties of the composites has been determined using Soxhlet extraction analysis, thermogravimetric analysis, dynamic mechanical analysis, and tensile testing. Increasing the amount of corn stover and decreasing the length of the fiber results in significant improvements in the mechanical properties of the composites. The Young's moduli and tensile strengths of the composites prepared range from 291 to 1398 MPa and 2.7 to 7.4 MPa, respectively. Water uptake data indicate that increasing the amount and fiber length of the corn stover results in significant increases in the absorption of water by the composites. The composites, containing 20 to 80 wt.% corn stover and a resin composed of 50 wt.% natural oil, contain 60 to 90 wt.% renewable materials and should find applications in the construction, automotive, and furniture industries. (c) 2010 Elsevier Ltd. All rights reserved.

  18. Effect of peppermint and citronella essential oils on properties of fish skin gelatin edible films

    Science.gov (United States)

    Yanwong, S.; Threepopnatkul, P.

    2015-07-01

    Fish skin gelatin films incorporated with peppermint and citronella essential oils at difference concentrations (10, 20 and 30% w/w) were prepared by solution casting. Addition of peppermint oil contributed to a significant decrease of tensile strength and Young's modulus, while the percent elongation at break showed an obvious increase except at 30% w/w. On the other hand, addition of citronella oils promoted a great increase of tensile strength and young's modulus, but an intense decrease of the percent elongation at break. At the predetermined content, the film incorporated with citronella oils outperformed the one with peppermint oils in term of water vapor transmission and solubility in water. Thermal properties of gelatin films with citronella oils exhibited an enhancement in heat stability, while the one with peppermint oils showed slight decrease in heat stability. The additions with both of essential oils exhibited excellent antibacterial properties against both Staphylococcus aureus and Escherichia coli.

  19. Physicochemical properties of Terminalia catappa seed oil as a novel dietary lipid source

    Directory of Open Access Journals (Sweden)

    Supatcha Janporn

    2015-06-01

    Full Text Available Terminalia catappa Linn (TC is an ornamental tree planted extensively in many countries. It has been known for a long time that the seeds are edible but no research has focused on the realm of its use as food. Our previous data showed that the seed contains high levels of oil content (600 g/kg and possesses the optimum fatty acid balance indicated in fat dietary guidelines. This study aims to investigate the physical and chemical properties and the possibility of using TC seed oil as a new dietary lipid. The effects of extraction conditions, partial refining process, and storage stability on TC oil properties were conducted compared with soybean oil. The results showed that physicochemical properties including the density, refractive index, melting point, acidity, free fatty acid, saponification value, unsaponifiable, peroxide, and fatty acid composition of the extracted oil were comparable with soybean oil and their values followed the dietary standard of edible oil.

  20. Determination of Vaporization Properties and Volatile Hazardous Components Relevant to Kukersite Oil Shale Derived Fuel Oil Handling

    Directory of Open Access Journals (Sweden)

    Ada TRAUMANN

    2014-09-01

    Full Text Available The aim of this study was to investigate vaporization properties of shale fuel oil in relation to inhalation exposure. The shale fuel oil was obtained from kukersite oil shale. The shale oil and its light fraction (5 % of the total fuel oil were characterized by vapor pressure curve, molecular weight distribution, elemental composition and functional groups based on FTIR spectra. The rate of vaporization from the total fuel oil at different temperatures was monitored as a function of time using thermogravimetric analysis (TGA. It is shown that despite its relatively low vapor pressure at room temperature a remarkable amount of oil vaporizes influencing air quality significantly. From the TGA data the changes in the vapor pressure during vaporization process were estimated. Although the shale fuel oil has a strong, unpleasant smell, the main hazards to workplace air quality depend on the vaporization rate of different toxic compounds, such as benzene, toluene, xylene or phenolic compounds. The presence of these hazardous substances in the vapor phase of shale fuel oil was monitored using headspace analysis coupled with selective ion monitoring (SIM and confirmed by the NIST Mass Spectral library and retention times of standards. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4549

  1. Effects of Chemical Inter esterification on the Physicochemical Properties of Palm Stearin, Palm Kernel Oil and Soybean Oil Blends

    International Nuclear Information System (INIS)

    Siti, M. F.H.; Norizzah, A. R.; Zaliha, O.

    2012-01-01

    Palm stearin (PS), palm kernel oil (PKO) and soybean oil (SBO) blends were formulated according to Design Expert 8.0.4 (2010). All the sixteen oil blends were subjected to chemical inter esterification (CIE) using sodium methoxide as the catalyst. The effects of chemical inter esterification on the slip melting point (SMP), solid fat content (SFC), triacylglycerol (TAG) composition and polymorphism were investigated. Palm based trans-free table margarine containing PS/PKO/SBO [49/20/31, (w/w)], was optimally formulated through analysis of multiple ternary phase diagrams and was found to have quite similar SMP and SFC profiles as compared with commercial table margarine. This study has shown that blending and chemical inter esterification are effective in modifying the physicochemical properties of palm stearin, palm kernel oil, soybean oil and their blends. (author)

  2. The effect of andiroba oil and chitosan concentration on the physical properties of chitosan emulsion film

    Directory of Open Access Journals (Sweden)

    Vanessa Tiemi Kimura

    Full Text Available Abstract Chitosan film is used as a dressing to heal burns. The physical and biological properties of the film can be modified by the addition of phytotherapic compounds. This work used the casting -solvent evaporation technique to prepare chitosan film containing andiroba oil (Carapa guianensis which has anti-inflammatory, antibiotic, and healing properties. The objective of this study was to determine the effect of the concentrations of chitosan and andiroba oil on the physical properties of chitosan films. The emulsion films were evaluated concerning the mechanical properties and fluid handling capacity. Additionally, scanning electron microscopy and thermal analysis were performed. The results showed that the barrier and mechanical properties were affected by the addition of andiroba oil, and these may be modulated as a function of the concentration of oil added to the film. The thermal analysis showed no evidence of chemical interactions between the oil and chitosan.

  3. Chemical Composition and Biological Properties of Essential Oils of ...

    African Journals Online (AJOL)

    Purpose: To analyze the composition of essential oils of two types of mint as well as compare the antimicrobial ... was determined by gas chromatography-mass spectrometry (GC/MS). ..... autoxidation of soybean oil in cyclodextrin emulsion.

  4. Correlation between electrical, mechanical and chemical properties of fresh and used aircraft engine oils

    Science.gov (United States)

    Gajewski, Juliusz B.; Głogowski, Marek J.; Paszkowski, Maciej; Czarnik-Matusewicz, Bogusława

    2011-06-01

    In this paper the results are presented of measurements of electrical, mechanical and chemical properties of fresh and used aircraft engine oils. Oils were used in a four-stroke aircraft engine and their samples were taken after the 50-hour work of the engine. The resistivity, permittivity and viscosity of oils were measured as a function of temperature. Additionally, some measurements of the absorbance spectra and size of particles contained in the oils were carried out. The significant reduction in the resistivity of the used Total oil was observed. The relative permittivity of both used oils was slightly increased. The oil's relative viscosity depends on temperature of oil and given time that elapsed from the very first moment when the shear force was applied in a rheometer. The results obtained allowed one to identify more precisely the chemical and physico-chemical interactions occurring in the tested samples, as compared with a typical infrared spectroscopy.

  5. Correlation between electrical, mechanical and chemical properties of fresh and used aircraft engine oils

    International Nuclear Information System (INIS)

    Gajewski, Juliusz B; Glogowski, Marek J; Paszkowski, Maciej; Czarnik-Matusewicz, Boguslawa

    2011-01-01

    In this paper the results are presented of measurements of electrical, mechanical and chemical properties of fresh and used aircraft engine oils. Oils were used in a four-stroke aircraft engine and their samples were taken after the 50-hour work of the engine. The resistivity, permittivity and viscosity of oils were measured as a function of temperature. Additionally, some measurements of the absorbance spectra and size of particles contained in the oils were carried out. The significant reduction in the resistivity of the used Total oil was observed. The relative permittivity of both used oils was slightly increased. The oil's relative viscosity depends on temperature of oil and given time that elapsed from the very first moment when the shear force was applied in a rheometer. The results obtained allowed one to identify more precisely the chemical and physico-chemical interactions occurring in the tested samples, as compared with a typical infrared spectroscopy.

  6. Study on the Tribological Properties of MC Nylon Composites Filled with Hydraulic Oil

    Science.gov (United States)

    Yuan, S.; Li, Y.; Wen, J.; Yin, L.; Zhang, Q.

    2018-03-01

    Mechanical parts utilized in machinery, such as nylon slider and pulley, should have certain mechanical properties and good tribological properties, so that equipments’ stability and smoothness can be assured. A kind of MC nylon (monomer cast nylon) composites filled with hydraulic oil was studied in this paper. The addition of hydraulic oil changed nylon’s mechanical properties and tribological properties significantly, and improved the material’s toughness and coefficient of friction. The composites have excellent strength, toughness and relatively low coefficient of friction when the content of the hydraulic oil is 4wt%.

  7. Effects of chemical dispersants on oil physical properties and dispersion. Volume 1

    International Nuclear Information System (INIS)

    Khelifa, A.; Fingas, M.; Hollebone, B.P.; Brown, C.E.; Pjontek, D.

    2007-01-01

    Laboratory and field testing have shown that the dispersion of oil spilled in water is influenced by chemical dispersants via the modification of the interfacial properties of the oil, such as oil-brine interfacial tension (IFT). This study focused on new laboratory experiments that measured the effects on the physical properties and dispersion of oil, with particular reference to the effects of chemical dispersants on IFT and oil viscosity and the subsequent effects on oil droplet formation. Experiments were conducted at 15 degrees C using Arabian Medium, Alaska North Slope and South Louisiana crude and Corexit 9500 and Corexit 9527 chemical dispersants. The dispersants were denser than the 3 oils. The effect of IFT reduction on oil dispersion was measured and showed substantial reduction in the size and enhancement of the concentration of oil droplets in the water column. It was shown that the brine-oil IFT associated with the 3 crudes reduced to less than 3.6 mN/m with the application of the chemical dispersants, even at a low dispersant-to-oil ratio (DOR) value of 1:200. The use of chemical dispersants increased the viscosity of the dispersant-oil mixture up to 40 per cent over the neat crude oil. It was shown that for each mixing condition, an optimum value of DOR exists that provides for maximal dispersant effectiveness. The IFT reaches maximum reduction at optimum DOR. It was suggested that oil spill modelling can be improved with further study of IFT reduction with DOR and variations of critical micelle concentration with the type and solubility of chemical dispersant, oil type and oil to water ratio. 13 refs., 3 tabs., 7 figs

  8. Properties of soap prepared from waste edible oil. Haishokuyu kara sakuseishita sekken no seijo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kajinoto, G.; Yamaguchi, H. (Kobe Gakuin University, Kobe (Japan). Faculty of Nutrition)

    1992-08-30

    Discussions were given on properties of soap prepared from waste edible oil. A fresh oil, and soybean and rapeseed oils with different thermal oxidation degrees were used to prepare soap. On the other hand soap was made using wast edible oil after used at home. Soap made from fresh oil and thermally oxidized oil under a 3-hour heating at 90[degree]C has less non-saponified fat. Soap made from a large amount of waste edible oil. taking 34 days had much residual fat, proving these were insufficiently saponified. Slightly higher values were recognized in the soap from fresh oil for anisidine value (An.V), carbonyl value (CV), peroxide value (POV) and the content of oxidized fatty acids than in fresh oil itself. On the other hand, the An.V and CV in the soap made from thermally oxidized oil were lower than those for thermally oxidized oil itself. The An. V and CV in the soap made from waste edible oil were higher than those in waste edible oil itself. As the soap has been stored, all of the soap showed increase in the An.V, the CV, the POV and the oxidized fatty acid amount, but the fatty acid composition showed no change. 9 refs., 4 figs., 4 tabs.

  9. Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils.

    Science.gov (United States)

    Ren, Xueyong; Meng, Jiajia; Moore, Andrew M; Chang, Jianmin; Gou, Jinsheng; Park, Sunkyu

    2014-01-01

    The degradation properties and combustion performance of raw bio-oil, aged bio-oil, and bio-oil from torrefied wood were investigated through thermogravimetric analysis. A three-stage process was observed for the degradation of bio-oils, including devolatilization of the aqueous fraction and light compounds, transition of the heavy faction to solid, and combustion of carbonaceous residues. Pyrolysis kinetics parameters were calculated via the reaction order model and 3D-diffusion model, and combustion indexes were used to qualitatively evaluate the thermal profiles of tested bio-oils for comparison with commercial oils such as fuel oils. It was found that aged bio-oil was more thermally instable and produced more combustion-detrimental carbonaceous solid. Raw bio-oil and bio-oil from torrefied wood had comparable combustion performance to fuel oils. It was considered that bio-oil has a potential to be mixed with or totally replace the fuel oils in boilers. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Comparison of lubricant properties of castor oil and commercial engine oil

    Directory of Open Access Journals (Sweden)

    Binfa Bongfa

    2015-06-01

    Full Text Available The tribological performance of crude Nigeria-based castor oil has been investigated and compared with that of a foreign, 20W-50 high quality crankcase oil, to see its suitability as base oil for lubricating oils in indigenous vehicle and power plants engines. The experiment was conducted using a four ball tester. The results showed that unrefined castor oil has superior friction reduction and load bearing capability in an unformulated form than the commercial oil; can compete favourably with the commercial oil in wear protection when formulated with suitable antiwear agent, hence can be a good alternative base stock for crankcase oils suitable for Nigeria serviced vehicles, and plants engines from tribological, environmental, and non-food competitive points of view.

  11. 7 CFR 1955.128 - Appraisers.

    Science.gov (United States)

    2010-01-01

    ... type of properties (such as large farms and business property) requiring valuation. For Farmer Programs... REGULATIONS (CONTINUED) PROPERTY MANAGEMENT Disposal of Inventory Property Use of Contractors to Dispose of Inventory Property § 1955.128 Appraisers. (a) Real property. The State Director may authorize the County...

  12. 12 CFR 722.5 - Appraiser independence.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Appraiser independence. 722.5 Section 722.5 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS APPRAISALS... interest, financial or otherwise, in the property. If the only qualified persons available to perform an...

  13. Coconut oil has less satiating properties than medium chain triglyceride oil.

    Science.gov (United States)

    Kinsella, R; Maher, T; Clegg, M E

    2017-10-01

    It is well established that the consumption of medium-chain triglycerides (MCT) can increase satiety and reduce food intake. Many media articles promote the use of coconut oil for weight loss advocating similar health benefits to that of MCT. The aim of this study was to examine the effect of MCT oil compared to coconut oil and control oil on food intake and satiety. Following an overnight fast, participants consumed a test breakfast smoothie containing 205kcal of either (i) MCT oil (ii) coconut oil or (iii) vegetable oil (control) on three separate test days. Participants recorded appetite ratings on visual analogue scales and were presented with an ad libitum lunch meal of preselected sandwiches 180min after consumption of the breakfast. The results showed a significant difference in energy and macronutrient intakes at the ad libitum meal between the three oils with the MCT oil reducing food intake compared to the coconut and control oil. Differences in food intake throughout the day were found for energy and fat, with the control having increased food intake compared to the MCT and coconut. The MCT also increased fullness over the three hours after breakfast compared to the control and coconut oils. The coconut oil was also reported as being less palatable than the MCT oil. The results of this study confirm the differences that exist between MCT and coconut oil such that coconut oil cannot be promoted as having similar effects to MCT oil on food intake and satiety. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  14. Monoglyceride contents in biodiesel from various plants oil and the effect to low temperature properties

    Science.gov (United States)

    Aisyah, L.; Wibowo, C. S.; Bethari, S. A.; Ufidian, D.; Anggarani, R.

    2018-03-01

    Monoglyceride is a by-product component of biodiesel process that relates to sedimentation problem at low temperature environment. To prevent the problem in using biodiesel-diesel fuel blends, it is necessary to limit of the monoglyceride content. The factor affecting monoglyceride content in biodiesel is the transesterification reaction and also the plant that is used. In this study, we investigate the monoglyceride content in biodiesel made from 4 plant oils; kemiri sunan (Reutealis trisperma) oil, coconut oil, nyamplung (Calophyllum inophyllum) oil, and waste cooking oil. These oils are purified and checked for its critical properties then converted to biodiesel. The biodiesel tested refer to Standard National of Indonesia for biodiesel (SNI 7182:2015). The monoglyceride content of biodiesel from kemiri sunan (Reutealis trisperma) oil, coconut oil, nyamplung (Calophyllum inophyllum) oil, and waste cooking oil, are 8.86%, 0.69%, 4.0%, and 2.69% consecutively. The low temperature properties represented by viscosity (@40 0C) for the 4 samples in the same order as before are 6.1 cSt, 2.7 cSt, 4.71 cSt, and 4.90 cSt. The cloud point is measured with the result of 30 °C, -20 °C, -60 °C and 30 °C respectively. The conclusions indicate that monoglyceride content can affect the low temperature properties of biodiesel.

  15. The effects of process technology on the physicochemical properties of peony seed oil

    International Nuclear Information System (INIS)

    Qu, J.; Zhang, F.; Thakur, K.; Shi, J.J.; Zhang, J.G.; Faisal, S.; Wei, Z.J.

    2017-01-01

    Peony seed oils (PSOs) were prepared using supercritical CO2 (SC) and compared with soxhlet extraction (SE) and mechanical screw press extraction (SPE) methods. The fatty acid compositions of the oils were determined, and the physicochemical properties of the oils, including free radical-scavenging activity, α-amylase and α-glucosidase inhibition, thermal and rheological properties were evaluated. The unsaturated fatty acids in the SE oils were higher than SC and SPE oils due to the higher percentage of olefinic, allylic methylene and allylic methine protons in the SE oils. The SPE oils also displayed the highest DPPH and ABTS+ radical scavenging activity at the tested concentrations. However, the SE oils showed stronger inhibitory effects on α-amylase and α-glucosidase enzymes under in vitro conditions when compared with the other oil samples. The three oils had similar melting and crystalline point due to similar contents of fatty acids (FAs). The SC oils had a lower Ea than the others. [es

  16. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    Directory of Open Access Journals (Sweden)

    S. Bhaumik

    2016-03-01

    Full Text Available The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM images. The present test results predict that the antiwear and extreme pressure properties in case of the selected commercially available mineral oil are better than neat castor oil. Both coefficient of friction and frictional force increased by 16-42 % and 16-35 % respectively in case of neat castor oil as compared with that of the mineral oil. The load carrying capacity in case of mineral oil has been found to be 250 kg while in case of castor oil it has been found to be 126 kg. SEM images show a higher plastic deformation in case of castor oil as compared to the mineral oil. Both mineral oil and castor oil showed surface deteriorations and increase in roughness after 40 hrs of intermittent running during scuffing test. Thus, the present investigation indicates that the tribological properties of neat castor are inferior to that of mineral oil although close observation of the results shows that both AW and EP properties of neat castor oil are much closer to that of commercial mineral oil. Thus, the present work would help in formulating castor oil based new bio lubricants with better anti wear and extreme pressure properties

  17. A study of relations between physicochemical properties of crude oils and microbiological characteristics of reservoir microflora

    Science.gov (United States)

    Yashchenko, I. G.; Polishchuk, Yu. M.; Peremitina, T. O.

    2015-10-01

    The dependence of the population and activity of reservoir microflora upon the chemical composition and viscosity of crude oils has been investigated, since it allows the problem of improvement in the technologies and enhancement of oil recovery as applied to production of difficult types of oils with anomalous properties (viscous, heavy, waxy, high resin) to be solved. The effect of the chemical composition of the oil on the number, distribution, and activity of reservoir microflora has been studied using data on the microbiological properties of reservoir water of 16 different fields in oil and gas basins of Russia, Mongolia, China, and Vietnam. Information on the physicochemical properties of crude oils of these fields has been obtained from the database created at the Institute of Petroleum Chemistry, Siberian Branch on the physicochemical properties of oils throughout the world. It has been found that formation water in viscous oil reservoirs is char acterized by a large population of heterotrophic and sulfate reducing bacteria and the water of oil fields with a high paraffin content, by population of denitrifying bacteria.

  18. Rheological properties of oil-in-water emulsions prepared with oil and protein isolates from sesame (Sesamum Indicum

    Directory of Open Access Journals (Sweden)

    David Ramirez BREWER

    2016-01-01

    Full Text Available In this study, food emulsions of oil in water from sesame (Sesamum indicum protein isolates and their oil were formulated and standardised. The effect of the concentrations of sesame (Sesamum indicum protein isolates and base oil and the speed of the emulsification process for the food emulsion stability was studied. The protein isolates were achieved from the defatted sesame flour (DSF, obtaining a percentage of 80% ± 0.05% of protein. Emulsions were formulated through a factorial design 23. The rheological behaviour of sesame (Sesamum indicum protein isolates-stabilised emulsions and microstructural composition were investigated. Stable emulsions with suitable rheological properties and microstructure were formulated at a concentration of 10% sesame oil and different concentrations of protein isolates, between 1.5% and 2.5%, with the best droplet distribution characteristics being shown for the 2.5% sesame protein isolates. The emulsions showed a non-Newtonian fluid behaviour, adjusting the Sisko model.

  19. Comparative Properties of Amazonian Oils Obtained by Different Extraction Methods

    Directory of Open Access Journals (Sweden)

    Cláudio Galuppo Diniz

    2011-07-01

    Full Text Available Pequi (Caryocar brasiliense Camb., babaçu (Orbignya phalerata Mart., buriti (Mauritia flexuosa, and passion fruit (Passiflora edulis oils were studied to determine their antibacterial, antioxidant and cytotoxic activities, as well as their total phenol and carotenoid contents. The fatty acid contents were determined by GC-MS. The three types of passion fruit oils studied were refined, cold pressed or extracted from seeds in a Soxhlet apparatus. The oils thus obtained showed differences in antioxidant activity and carotenoid content, but were similar in regard to total phenols. Buriti and pequi had the highest carotenoid contents, while refined and cold pressed passion fruit oil displayed the highest antioxidant activity. Pequi oil was the only oil to display antibacterial and cytotoxic activity.

  20. Durability Properties of Palm Oil Fuel Ash Self Compacting Concrete

    Directory of Open Access Journals (Sweden)

    T. Ofuyatan

    2015-02-01

    Full Text Available Self Compacting Concrete (SCC is a new innovation in technology that can flow readily into place under its own self weight and fill corner areas of reinforcement structures without the need to vibrate and without segregation of its constitute. The problem of durability of concrete structures due to inadequate compaction by skilled workers has become a source of concern globally. The shortage of skilled manpower, noise and vibration of equipment on construction sites has led to the development of self compacting concrete. This paper presents an experimental study on the durability properties of Self Compacting Concrete with partial placement of Palm Oil Fuel Ash (POFA. Twelve POFA self-compacting concretes of various strength grades were designed at varying percentages of 0, 5, 10, 15, 20, 25 and 30%. The concrete with no placement of ash served as control. Conplast SP432MS was used as superplasticiser in the mix. The experiments are carried out by adopting a water-powder ratio of 0.36. Workability of the fresh concrete is determined by using tests such as: slump flow, T50, V-funnel and L-Box tests. The durability of concrete is tested by acid resistance, sulphate attack and saturated water absorption at the age of 14, 28, 56 and 90 days.

  1. Physicochemical properties and oxidative stability of bleached pomace-olive oil on Tunisian activated clays

    International Nuclear Information System (INIS)

    Jahouach, Wafa

    2002-01-01

    This work is a contribution to studying bleaching process, which is an important stage in refining of vegetable oils. This process permitted to reduce or convert undesired constituents to harmless ones from oils and fats. Virgin olive oil, considered as reference, and pomace-olive oil were bleached in optimal conditions using Tunisian activated clays ( collected from the South of Tunisia) which were prepared in our laboratory and compared with commercial bleaching earths. It was shown that activated Tunisian clays are characterized by a very important adsorptive capacity, which is similar to that of commercial ones. In addition, the study of physicochemical properties of bleached oils was considered. The fatty acid composition (GC), the triacylglycerol composition (HPLC), and oxidative stability (UV spectrometry) allowed to conclude that treated oils do not undergo considerable physicochemical alterations and their caracteristics remain in concordance with international standards relative to edible refined oils. (Author)

  2. Preparation and oil absorption properties of magnetic melamine sponge

    Science.gov (United States)

    Lei, LUO; Jia-qi, HU; Na, LV

    2017-12-01

    The magnetic melamine sponge (MS-Fe3O4) with magnetic response and high hydrophobicity was fabricated by two-step method. First, the magnetic nano-particles were fixed on the skeleton of melamine sponge (MS) using 3-hydroxytyramine hydrochloride and 1-dodecanethiol, then hydrophobicity modified with octadecyltrichlorosilane (OTS). The structures and chemical compositions of MS and MS-Fe3O4 were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The wettability of the sample was obtained by using contact angle analysis system. MS-Fe3O4 endowed with outstanding selectivity and excellent oil absorption capacities, which can be widely used in absorbing various sorts of oil. The oil absorption capacities for crude oil, diesel oil, lubricating oil, soybean oil and peanut oil were 71g/g, 51g/g, 62g/g, 54g/g, 57g/g. In addition, MS-Fe3O4 showed excellent recyclability which can be forecasted as an ideal candidate for oil-water separation.

  3. Effects of γ-radiation on the properties of insulating oil

    International Nuclear Information System (INIS)

    Abdel Aziz, M.M.; Elshazly-Zaghloul, M.; Zaghloul, A.R.M.; Fikry, L.; Raieh, M.

    1986-01-01

    Electrical Equipment used in an irradiated environment suffer from ionization and other effects. Insulating oil, e.g. of transformers, in a nuclear power station is subjected to γ-radiation. In this communication we provide a detailed experimental study of insulating oil subjected to γ-radiation. Unused oil samples of the type used in Egypt were subjected to γ-radiation for different time periods. The electrical properties of these samples are measured; dielectric constant and breakdown strength

  4. Influence of physicochemical properties of rice flour on oil uptake of tempura frying batter.

    Science.gov (United States)

    Nakamura, Sumiko; Ohtsubo, Ken'ichi

    2010-01-01

    The physicochemical properties of rice flour and wheat flour influenced the oil uptake of tempura frying batter. Rice flour was better than wheat flour in the overall quality and crispness of the fried tempura batter. Rice flour resisted oil absorption more than wheat flour, and a higher level of apparent starch amylose and higher consistency/breakdown ratio of the pasting properties led to a lower oil uptake of the batter. Super hard EM10 rice showed the highest apparent amylose content and higher consistency/breakdown ratio than the other flour samples, the batter from EM10 revealing the lowest oil content after frying among all the batters examined. The apparent amylose content, consistency/breakdown ratio and oil absorption index are proposed as useful guides for oil absorption when frying from among the physicochemical properties that influence the oil content of fried batter. Our proposal for the "oil absorption index" could be a simple, although not perfect method for estimating the oil content of batter flour.

  5. Physicochemical properties, antimicrobial activity and oil release of fish gelatin films incorporated with cinnamon essential oil

    Directory of Open Access Journals (Sweden)

    Jiulin Wu

    2017-07-01

    Full Text Available Fish skin gelatin films incorporated with various concentrations of cinnamon essential oil (CEO were prepared and characterized. The results showed that tensile strength (TS, elongation at break (EAB, and water content (WC of the gelatin based film decreased with the increasing concentrations of CEO, but water vapor permeability (WVP increased. Addition of CEO improved light barrier property of the film. The Scanning electron microscope (SEM showed that the heterogeneous surface and porous formation appeared in gelatin-CEO films. Fourier transform infrared spectroscopy analyses (FTIR-ATR spectra indicated the interactions existed between gelatin and CEO. The gelatin-CEO films exhibited good inhibitory effects against the tested microorganisms (Escherichia coli, Staphylococcus aureus, Aspergillus niger, Rhizopus oryzae, and Paecilomyces varioti and their antifungal activity seemed to be more effective than the resistance to bacterial growth. In vitro release studies showed an initial burst effect of CEO release and that subsequently slowed down at 40 °C, but the initial burst release was not obvious at 4 °C. The obtained results suggested that incorporation of CEO as a natural antimicrobial agent into gelatin film has potential for developing as active food packaging.

  6. Composition and Physical Properties of Cress (Lepidium sativum L.) and Field Pennycress (Thlaspi arvense L.) Oils

    Science.gov (United States)

    The fatty acid profile and tocopherol, and phytosterol contents of crude cress (Lepidium sativum L.) and field pennycress (Thlaspi arvense L.) oils are reported, along with yields from the corresponding seeds. The physical properties of these oils were also determined, which included oxidative stab...

  7. Effects of seed preparation and oil pressing on milkweed (Asclepias spp.) protein functional properties

    Science.gov (United States)

    The effects of seed cooking and oil processing conditions on functional properties of milkweed seed proteins were determined to identify potential value-added uses for the meal. Milkweed seeds were flaked and then cooked in the seed conditioner at 82°C for 30, 60 or 90 min. Oil was extracted by scre...

  8. Chemical composition and insecticidal properties of the essential oil ...

    African Journals Online (AJOL)

    Methods: The essential oil of B. frondosa was obtained by hydro-distillation and analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) with HP-5MS column. The active constituents were purified from the oil by bioactivity-guided fractionation. Contact (impregnated filter paper method) ...

  9. Chemical Composition and Antifungal Properties of Essential Oil of ...

    African Journals Online (AJOL)

    Purpose: To evaluate the effect of the essential oil of Origanum vulgare Linnaeus (Lamiaceae) on the growth of Sporothrix schenckii and Sporothrix brasiliensis. Methods: The chemical composition of the essential oil was investigated by gas chromatography/flame ionization detector (GC-FID). The minimum inhibitory ...

  10. Influence of the processed sunflower oil on the cement properties

    Science.gov (United States)

    Fleysher, A. U.; Tokarchuk, V. V.; Sviderskiy, V. A.

    2015-01-01

    Used oils (vegetable oil, animal oil, engine oil, etc.), which are essentially industrial wastes, have found application as secondary raw materials in some braches of industry. In particular, the only well-known and commonly-used way of utilizing wastes of vegetable oils is to apply them as raw materials in the production of biodiesel. The goal of the present study is to develop a conceptually new way of vegetable oil wastes utilization in the building industry. The test admixture D-148 was obtained from the processing of wastes of sunflower oil and it mainly consists of fatty acid diethanolamide. The test admixture was added to the cement system for the purpose of studying its influence on water demand, flowability, setting times, compressive strength and moisture adsorption. The test admixture D-148 at the optimal content 0. 2 weight % causes 10% decrease in water demand, 1.7 time increase in flowability (namely spread diameter), 23% increase in grade strength and 34% decrease in moisture adsorption. The results of the present investigation make it possible to consider the final product of the waste sunflower oil processing as multifunctional plasticizing-waterproofing admixture.

  11. Chemical composition and antioxidant properties of the essential oil ...

    African Journals Online (AJOL)

    ONOS

    2010-07-05

    Jul 5, 2010 ... essential oil and methanol extracts of rhizoma Alpinia officinarum from China in .... h to steam distillation using a Clevenger apparatus to produce the essential oil in a .... The amount of crude methanol extract was 189 mg/g dry.

  12. Comparative Chemical And Analgesic Properties Of Essential Oils ...

    African Journals Online (AJOL)

    The chemical and analgesic comparison of essential oils of Cymbopogon nardus (L) Rendle of Benin and Congo was investigated. The Chemical analysis wa carried out by using GS/MS for identification of components of the two essential oils while acetic acid-induced writhings, hot plate and tail flick test models were used ...

  13. Chemical composition and antioxidant properties of the essential oil ...

    African Journals Online (AJOL)

    This study was designed to examine the in vitro antioxidant activities of the essential oil and methanol extracts of rhizoma Alpinia officinarum (small galanga) from China. The essential oil was analyzed by gas chromatography/ mass spectrometry (GC/MS) and 46 constituents were identified. Methanol extract from rhizoma A.

  14. Chemical composition and insecticidal properties of essential oil ...

    African Journals Online (AJOL)

    8.21 %), bornene (8.02 %), and β-thujone (7.31 %) [10]. This suggests that the oil composition of these plants differs according to location and growth stage [10,11]. Thus, the composition of this essential oil must be standardized prior to its.

  15. Properties of organogels of high stearic soybean oil

    Science.gov (United States)

    Recently, the U.S. Food and Drug Administration (FDA) announced that food companies have to phase out the use of partially hydrogenated oils containing trans-fats by 2018. The use of high-stearic oils has been recognized as one of the ways to replace trans fats in food. Organogels also have drawn a ...

  16. Extraction and physico chemical properties of some edible seed oils ...

    African Journals Online (AJOL)

    Six edible seed samples were obtained from Yankura market in Kano metropolis, Kano state. The samples were subjected to extraction for their oil contents. The percentage oil yield from the seeds were 40.60% for Moringa oleifera, 49.39% for cashew, 47.80% for sesame, 11.92% for bitter kola, 38.30% for melon and ...

  17. physical, chemical, technological and biological properties of some mutant oil seeds induced by gamma radiation

    International Nuclear Information System (INIS)

    Ali, H.G.M.

    2003-01-01

    The present study has been undertaken to evaluated sesame, sunflower and safflower seeds induced by gamma rays, as plant breeding unit, plant research department, radioisotope application division, nuclear research center, atomic energy authority Inshas. the obtained results indicate the following : chemical composition of mutant seeds: the radiation mutation caused a significant increase in both oil and ash content total carbohydrates showed a significant decreased in sesame seeds. radiation mutation induced significant increase in oil and protein content of sunflower and safflower seeds. while the total carbohydrate showed a significant decrease. physiochemical properties of oils extracted mutant seeds: the radiation mutation had no real effect on the refractive index and A.V of oils extracted from control and mutant sesame, sunflower and safflower seeds. while it caused a slight increase in red color and P.V. of sesame oil, the thiobarbituric acid (TBA) value of mutant sesame oil was not alter upon radiation mutation, but it induced a slight decrease in TBA of mutant sunflower and safflower oils. the unsaponifiable matter percentage of oils extracted from mutant sesame, sunflower and safflower seeds were slightly increased by radiation mutation .radiation mutation of seeds had no real effect on the total SFA and USFA of sesame oil. however, radiation mutation induced a remarkable changes in fatty acid profiles of sunflower and safflower oil as total SFA decreased, while USFA increased. Uric acid was only detected in oil extracted from mutant sunflower seeds

  18. Effect of Kevlar and carbon fibres on tensile properties of oil palm/epoxy composites

    Science.gov (United States)

    Amir, S. M. M.; Sultan, M. T. H.; Jawaid, M.; Cardona, F.; Ishak, M. R.; Yusof, M. R.

    2017-12-01

    Hybrid composites with natural and synthetic fibers have captured the interests of many researchers. In this work, Kevlar/oil palm Empty Fruit Bunch (EFB)/Kevlar and carbon/oil palm EFB hybrid/carbon composites were prepared using hand lay-up technique by keeping the oil palm EFB fiber as the core material. The tensile properties which include tensile strength, tensile modulus and elongation at break were investigated. It is observed that the tensile strength and modulus for carbon/oil palm EFB/carbon hybrid composites were much higher as compared with Kevlar/oil palm EFB/Kevlar hybrid composites. However, the elongation at break for Kevlar/oil palm EFB/Kevlar hybrid composites exhibited higher value as compared to carbon/oil palm EFB/carbon hybrid composites and oil palm EFB/epoxy composites. The tensile strength for carbon/oil palm EFB/carbon hybrid composites is 93.6 MPa and the tensile modulus for carbon/oil palm EFB/carbon hybrid composites is 6.5 GPa. The elongation at break for Kevlar/oil palm EFB/Kevlar hybrid composites is 3.6%.

  19. 107 an appraisal of the scope of provisions under

    African Journals Online (AJOL)

    Fr. Ikenga

    EZE & EZE: An Appraisal of the Scope of Provisions Under The 1999 Nigerian Constitution for the Control of Pollution. Arising from the Oil and Gas Industry. AN APPRAISAL OF THE .... However, in a historic judgment, a Federal High Court sitting in Benin-City and presided over by Nwokorie J, held that continued gas flaring ...

  20. Effect of crude oil pollution on maize growth and soil properties in ...

    African Journals Online (AJOL)

    Effect of crude oil pollution on maize growth and soil properties in Ihiagwa, Imo State, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE ... International Journal of Agriculture and Rural Development.

  1. The appraisal rationalisation of real estate expertise

    Directory of Open Access Journals (Sweden)

    Marina Ciuna

    2013-12-01

    Full Text Available The Italian appraisal practice is characterized by valuations developed in subjective opinions formulated by the valuers, according to the experience and the competence rather than on the survey of the market data of comparable properties. This practice makes up for the lack of information on the real estate market and to the consequent absence of systematic collections of market data. This tradition is in the cadastral appraisal for the rural (1886 and urban properties (1939. The assessed income is appraised for a representative property and wide to all the other properties with arbitrary scores (pure number. The assessed value is derived from the income with fixed multipliers. The reform of the cadastral appraisals (2013 provides the employment of predetermined statistic functions rather than the automated valuation models applied in the mass appraisal. There are therefore ample spaces to rationalize the Italian valuations. For the market appraisal the process of rationalization is based on the comparison between the expertise and the market comparison approach. For the cadastral appraisal the process of rationalization is based on the statistic application to the fixed functions with the survey of a sample of market prices and the ratios study according to the valuation standards.

  2. Physico-chemical properties and fatty acid composition of pomegranate, cherry and pumpkin seed oils.

    Science.gov (United States)

    Siano, Francesco; Straccia, Maria C; Paolucci, Marina; Fasulo, Gabriella; Boscaino, Floriana; Volpe, Maria G

    2016-03-30

    Nut and seed oils are often considered waste products but in recent years they have been receiving growing interest due to their high concentration of hydrophilic and lipophilic bioactive components, which have important pharmacological properties on human health. The aim of this work was to compare the physico-chemical and biochemical properties of pomegranate (Punicagranatum), sweet cherry (Prunusavium) and pumpkin (Cucurbita maxima) seed oils obtained by solvent extraction. High amount of linoleic acid was found in the cherry and pumpkin seed oils, while pomegranate seed oil showed relevant content of polyunsaturated fatty acids (PUFAs) and monounsaturated fatty acids (MUFAs) along to eicosapentaenoic acid (EPA) and nervonic acid. Pumpkin seed oil had high concentration of carotenoids, while pomegranate oil was the best absorber in the UV-A and UV-B ranges. Pomegranate, cherry and pumpkin seed oils can be an excellent source of bioactive molecules and antioxidant compounds such as polyphenols, carotenoids and unsaturated fatty acids. These seed oils can be included both as preservatives and functional ingredients in the food, pharmaceutical and cosmetic fields and can contribute to disease prevention and health promotion. Moreover, high absorbance of UV light indicates a potential use of these oils as filters from radiations in the food, pharmaceutical, and cosmetic fields. © 2015 Society of Chemical Industry.

  3. Effect of deep frying on physicochemical properties of some edible oils

    International Nuclear Information System (INIS)

    Mahrous, S.R.

    2006-01-01

    The effects of heating on some quality characteristics of sunflower oil, cotton seed oil and a mixture (1:1) of both oils have been investigated. Every sample was heated for up to 10 hours. The study included changes in colour, viscosity, some chemical properties (acid value, peroxide value, saponification number and iodine value), fatty acids and hydrocarbons composition. The colour of the three studied oils was changed as a result of deep frying at 180 degree C for up to 10 hours. Also, the viscosity of all oil samples showed gradual increase from the 1st up to the 10th hour of frying. The acid, peroxide and saponification values of oil samples were increased by extending the frying periods whereas iodine value was decreased up to 10 hours frying. The fatty acids composition was unstable and changed as a result of heat treatments. Saturated fatty acids were increased while unsaturated fatty acids were decreased. Furthermore, the hydrocarbon contents of the three oils showed obvious change after 10 hours of boiling. According to the data obtained, it could be concluded that extending the time of heating resulted in significant changes in the physicochemical properties of the oil and sunflower oil appear to be the most resistant to thermal treatment (2-3 hours

  4. Physical and chemical properties of olive oil extracted from olive cultivars grown in Shiraz and Kazeroon

    DEFF Research Database (Denmark)

    Homapour, M.; Hamedi, M.; Moslehishad, M.

    2014-01-01

    Background and objective: The composition of olive oil is significantly affected by the cultivar and climatic conditions. The present study determined the chemical characteristics of olive oil extracted from two major Iranian varieties of olive (yellow and local oil-grade) in Shiraz and Kazeroon......, two major olive-producing areas in Fars province. Materials and methods: The composition of olive oil is significantly affected by the cultivar and climatic conditions. The present study determined the chemical characteristics of olive oil extracted from two major Iranian varieties of olive (yellow...... and local oil-grade) in Shiraz and Kazeroon, two major olive-producing areas in Fars province. Results: The results showed that the physical and chemical properties of both cultivars are in accordance with national and international standards. There was a significant difference in acidity, iodine content...

  5. Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites

    International Nuclear Information System (INIS)

    Bakare, I.O.; Okieimen, F.E.; Pavithran, C.; Abdul Khalil, H.P.S.; Brahmakumar, M.

    2010-01-01

    The development of high-performance composite materials from locally sourced and renewable materials was investigated. Rubber seed oil polyurethane resin synthesized using rubber seed monoglyceride derived from glycerolysis of the oil was used as matrix in the composite samples. Rubber seed oil-based polyurethane composite reinforced with unidirectional sisal fibers were prepared and characterized. Results showed that the properties of unidirectional fiber-reinforced rubber seed oil-based polyurethane composites gave good thermal and mechanical properties. Also, the values of tensile strengths and flexural moduli of the polyurethane composites were more than tenfold and about twofold higher than un-reinforced rubber seed oil-based polyurethane. The improved thermal stability and the scanning electron micrographs of the fracture surface of the composites were attributed to good fiber-matrix interaction. These results indicate that high-performance 'all natural products' composite materials can be developed from resources that are readily available locally.

  6. Chemical Composition and Antifungal Properties of Essential Oil of ...

    African Journals Online (AJOL)

    Purpose: To evaluate the effect of the essential oil of Origanum vulgare Linnaeus (Lamiaceae) on the growth of Sporothrix schenckii and ..... of environmental conditions, geographic origins, .... Rio de Janeiro: Guanabara Koogan;. 2009. 914 p.

  7. Sensory properties of Californian and imported extra virgin olive oils.

    Science.gov (United States)

    Delgado, Claudia; Guinard, Jean-Xavier

    2011-04-01

    Production and consumption of extra-virgin olive has been increasing in the United States, particularly in California. The objective of this study was to compare the sensory characteristics of 22 extra virgin olive oils (EVOO) from California, Italy, Spain, Chile, and Australia using a generic descriptive analysis. A total of 22 sensory attributes were identified and defined by the descriptive panel. With the exception of thick and citrus, all sensory attributes were significantly different among the oils. Canonical Variate Analysis (CVA) showed that California oils differed from some imported EVOOs, mainly by their absence of defects. A second analysis, of only those attributes included in the International Olive Council (IOC) official scorecard, provided a less detailed description of the samples and did not allow for a full characterization of the oils. While the IOC attributes allowed for faster classification in terms of clean versus defective EVOOs, the more comprehensive descriptive analysis provided both more information and a more refined classification of the samples. Variety and region of origin were important factors in the classification of both Californian and imported EVOOs.   Measuring olive oil sensory quality using the IOC method-positive attributes of fruitiness, bitterness, and pungency, and defects including fusty, musty, winey, and rancid-allows for the certification of oils as extra virgin but it provides limited information on the sensory characteristics of the oils. A full descriptive profile, on the other hand, provides information that can be used by producers in the processing and marketing of their oils, and is a useful tool in the education of consumers about the wide range of (positive) sensory attributes in EVOO and the various sensory styles of EVOO.

  8. CHEMICAL COMPOSITION AND ANTIMICROBIAL PROPERTIES OF DIFFERENT BASIL OILS

    OpenAIRE

    H.C. Srivastava, Pankaj Shukla, Ajay Singh Maurya and Sonia Tripathi*

    2013-01-01

    ABSTRACT: The aerial parts essential oils of Ocimum basilicum (Lamiaceae) from Togo were steam-distilled and investigated for their percentage composition (GC and GC/MS) and in vitro antimicrobial activities. Five oil chemotypes were identified and classified as follows in line with their principal components: estragole type; linalool/estragole type; methyleugenol type; methyleugenol/t-anethole type; tanethole type. The in vitro microbiological experiments revealed that only the methyleugenol...

  9. Relationship of dough thermomechanical properties with oil uptake, cooking and textural properties of instant fried noodles.

    Science.gov (United States)

    Gulia, Neelam; Khatkar, B S

    2014-04-01

    Instant noodles were prepared from fifteen diverse wheat cultivars varying widely in their flour quality and dough rheology. Dough thermomechanical parameters obtained by Mixolab and flour analytical properties were correlated with the quality of instant noodles including oil uptake, cooking quality and textural attributes. The Mixolab parameters dough development time and dough stability showed significant positive correlation with cooking time, cooked weight, overall acceptability, hardness, springiness, cohesiveness and chewiness of noodles, while negatively correlated with oil uptake and cooking loss, therefore, exhibiting a marked positive effect on quality of instant noodles. Lower protein breakdown represented by C2 torque was also positively related with overall acceptability, hardness, springiness, cohesiveness and chewiness of noodles. Stickiness/adhesiveness of noodles was revealed to be mainly conferred by falling number values (R (2 )= 0.671) and damaged starch (R (2 )= 0.523) content of wheat flour samples. Flour samples with lesser values of protein content, sodium dodecyl sulphate sedimentation volume, thermal stability of proteins, dough stability and dough development time were found to be linked with poor noodle quality. Medium strong flours performed better in noodle making, while weaker flours demonstrated poor noodle quality. Dough rheology of good noodle making flours was characterized with higher dough development time, dough stability, C2, C3, C4 as well as C5 values. Noodles with higher overall acceptability showed a more continuous and uniform protein starch matrix in comparison to the poor counterparts.

  10. Physical properties and caffeine release from creams prepared with different oils

    Directory of Open Access Journals (Sweden)

    Wojciechowska Katarzyna

    2014-12-01

    Full Text Available Caffeine is a methylxanthine typically found in the Coffee Arabica L plant. Generally, caffeine is well-known as a orally administered mild stimulant of the central nervous system. However, for cosmetic purpose, caffeine is an active compound ingredient, at 7% concentration, in several anticellulite products. The efficiency of this mode of delivery is not fully understood. Hence, the aim of the study was to ascertain the effectiveness of particular carriers to release this ingredient. In so doing, we prepared six creams based upon different oils (Sesame oil, Rice oil, Walnut oil, Coconut oil, Sweet almond oil and Jojoba oil, containing 5% of caffeine, and compared the release of the substance from the obtained preparations. Initially, all of the creams were subjected to a variety of physical tests, among these being for slippage and spreadability. Furthermore, their rheological properties were evaluated. Subsequently, the creams were tested for caffeine release. In the slippage and spreadability tests, the coconut oil-based cream was revealed as having the best parameters. However, the rheological tests showed that all of the preparations had the pseudoplastic character of flowing according to the Ostwald de Waele power law model. The power low index (n for all the preparations was from 0.2467-0.3179 at 20°C and 0.2821-0.3754 at 32°C. At 20°C, the Sesame oil-, Walnut oil-, Sweet almond oil- and Jojoba oil-based creams were thixotropic, but at 32°C, thixotropy appeared only in the Walnut oil-based creams.

  11. Identifying potential heirs properties in the Southeastern United States: a new GIS methodology utilizing mass appraisal data

    Science.gov (United States)

    Scott Pippin; Shana Jones; Cassandra. Johnson Gaither

    2017-01-01

    This report presents a methodology for identifying land parcels that have an increased probability of being heirs property. Heirs property is inherited land passed to successive generations intestate, without clear title, typically to family members. This land ownership type is widespread among rural, African-American populations and is also thought to be pervasive in...

  12. Friction Theory Prediction of Crude Oil Viscosity at Reservoir Conditions Based on Dead Oil Properties

    DEFF Research Database (Denmark)

    Cisneros, Sergio; Zeberg-Mikkelsen, Claus Kjær; Stenby, Erling Halfdan

    2003-01-01

    The general one-parameter friction theory (f-theory) models have been further extended to the prediction of the viscosity of real "live" reservoir fluids based on viscosity measurements of the "dead" oil and the compositional information of the live fluid. This work representation of the viscosity...... of real fluids is obtained by a simple one-parameter tuning of a linear equation derived from a general one-parameter f-theory model. Further, this is achieved using simple cubic equations of state (EOS), such as the Peng-Robinson (PR) EOS or the Soave-Redlich-Kwong (SRK) EOS, which are commonly used...... within the oil industry. In sake of completeness, this work also presents a simple characterization procedure which is based on compositional information of an oil sample. This procedure provides a method for characterizing an oil into a number of compound groups along with the critical constants...

  13. Physicochemical properties of peanut oil-based diacylglycerol and their derived oil-in-water emulsions stabilized by sodium caseinate.

    Science.gov (United States)

    Long, Zhao; Zhao, Mouming; Liu, Ning; Liu, Daolin; Sun-Waterhouse, Dongxiao; Zhao, Qiangzhong

    2015-10-01

    High purity peanut oil-based diacylglycerol (PO-DAG) (94.95 wt%) was prepared via enzymatic glycerolysis from peanut oil (PO). The resulting dominance of DAGs was proven to greatly influence the properties of corresponding fresh or frozen-thawed emulsions. Stable fresh oil-in-water emulsions were produced using either PO-DAG or PO, with stability enhanced by increased concentrations of Na-CN. The lower equilibrium interfacial tension along with greater negative ζ-potential of PO revealed that Na-CN was preferentially adsorbed to the PO interface. Adding 0.05 mol/L NaCl to the PO emulsions minimized depletion flocculation caused by the unadsorbed Na-CN, but further NaCl addition increased oil droplet size and concomitant coalescence. For the PO-DAG emulsions, adding 0.2 mol/L NaCl did not significantly (p>0.05) affect their ζ-potential but adding 0.05 or 0.1 mol/L NaCl lowered ζ-potential, although NaCl at these concentrations increased oil droplet size and coalescence. Freezing-thawing process considerably weakened the stability of PO-DAG emulsions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport.

    Energy Technology Data Exchange (ETDEWEB)

    Lord, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Luketa, Anay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wocken, Chad [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schlasner, Steve [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aulich, Ted [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Allen, Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    Several fiery rail accidents in 2013-2015 in the U.S. and Canada carrying crude oil produced from the Bakken region of North Dakota have raised questions at many levels on the safety of transporting this, and other types of crude oil, by rail. Sandia National Laboratories was commissioned by the U.S. Department of Energy to investigate the material properties of crude oils, and in particular the so-called "tight oils" like Bakken that comprise the majority of crude oil rail shipments in the U.S. at the current time. The current report is a literature survey of public sources of information on crude oil properties that have some bearing on the likelihood or severity of combustion events that may occur around spills associated with rail transport. The report also contains background information including a review of the notional "tight oil" field operating environment, as well a basic description of crude oils and potential combustion events in rail transport. This page intentionally blank

  15. Design and characterization of copaiba oil/alginate films for wound dressings application: Effect of copaiba oil concentration on the film properties

    International Nuclear Information System (INIS)

    Martins, Aryane Christine Neves; Silva, Classius Ferreira da

    2016-01-01

    Full text: Polymeric films have been used as wound dressings for burns and wounds. The healing, anti-inflammatory and antibiotic properties of these films can be induced or potentiated by the incorporation of bioactive like herbal medicines. In this work, alginate films were produced incorporating copaiba oil (Copaifera L.) which has the properties as mentioned above. The casting technique was used to prepare the copaiba oil/alginate films. The copaiba oil was previously emulsified in an alginate solution, and the emulsion was cast in a Petri dish before slow drying. The copaiba oil concentration was evaluated. The films were characterized according to the permeability to water vapor, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and mechanical properties. The emulsified films showed appropriate properties for use as wound dressings. The main effect on the properties occurred in the highest concentration of copaiba oil. (author)

  16. Design and characterization of copaiba oil/alginate films for wound dressings application: Effect of copaiba oil concentration on the film properties

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Aryane Christine Neves; Silva, Classius Ferreira da, E-mail: aryanemartins_@hotmail.com [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil)

    2016-07-01

    Full text: Polymeric films have been used as wound dressings for burns and wounds. The healing, anti-inflammatory and antibiotic properties of these films can be induced or potentiated by the incorporation of bioactive like herbal medicines. In this work, alginate films were produced incorporating copaiba oil (Copaifera L.) which has the properties as mentioned above. The casting technique was used to prepare the copaiba oil/alginate films. The copaiba oil was previously emulsified in an alginate solution, and the emulsion was cast in a Petri dish before slow drying. The copaiba oil concentration was evaluated. The films were characterized according to the permeability to water vapor, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and mechanical properties. The emulsified films showed appropriate properties for use as wound dressings. The main effect on the properties occurred in the highest concentration of copaiba oil. (author)

  17. Unit root properties of crude oil spot and futures prices

    International Nuclear Information System (INIS)

    Maslyuk, Svetlana; Smyth, Russell

    2008-01-01

    In this article, we examine whether WTI and Brent crude oil spot and futures prices (at 1, 3 and 6 months to maturity) contain a unit root with one and two structural breaks, employing weekly data over the period 1991-2004. To realise this objective we employ Lagrange multiplier (LM) unit root tests with one and two endogenous structural breaks proposed by Lee and Strazicich [2003. Minimum Lagrange multiplier unit root test with two structural breaks. Review of Economics and Statistics, 85, 1082-1089; 2004. Minimum LM unit root test with one structural break. Working Paper no. 04-17, Department of Economics, Appalachian State University]. We find that each of the oil price series can be characterised as a random walk process and that the endogenous structural breaks are significant and meaningful in terms of events that have impacted on world oil markets

  18. Phytochemical and pharmacological properties of essential oils from Cedrus species.

    Science.gov (United States)

    Saab, Antoine M; Gambari, Roberto; Sacchetti, Gianni; Guerrini, Alessandra; Lampronti, Ilaria; Tacchini, Massimo; El Samrani, Antoine; Medawar, Samir; Makhlouf, Hassane; Tannoury, Mona; Abboud, Jihad; Diab-Assaf, Mona; Kijjoa, Anake; Tundis, Rosa; Aoun, Jawad; Efferth, Thomas

    2018-06-01

    Natural products frequently exert pharmacological activities. The present review gives an overview of the ethnobotany, phytochemistry and pharmacology of the Cedrus genus, e.g. cytotoxic, spasmolytic immunomodulatory, antiallergic, anti-inflammatory and analgesic activities. Cancer patients frequently seek remedies from traditional medicinal plants that are believed to exert less side effects than conventional therapy with synthetic drugs. A long-lasting goal of anti-cancer and anti-microbial therapy research is to find compounds with reduced side effects compared to currently approved drugs. In this respect, Cedrus species might be of interest. The essential oil isolated from Cedrus libani leaves may bear potential for drug development due to its high concentrations of germacrene D and β-caryophyllene. The essential oils from Cedrus species also show bioactivity against bacteria and viruses. More preclinical analyses (e.g. in vivo experiments) as well as clinical trials are required to evaluate the potential of essential oils from Cedrus species for drug development.

  19. Physico-Chemical Properties of the Oils and Fat from Crotalaria cleomifolia Seeds

    International Nuclear Information System (INIS)

    Noor Wini Mazlan; Ikram Muhd Said

    2011-01-01

    The seeds of C. cleomifolia (locally known as kacang hantu) collected along Simpang Pulai - Berinchang Road, Cameron Highlands, was defatted with hexane and the resulting oil was analysed for their physico-chemical properties. The percentage yield of the oil was calculated as 5.3 %. The acid value (1.2 %), iodine value (85), peroxide value (0.6), saponification value (192.0) and unsaponifiable matter (2.3 %) were determined to assess the quality of the oil. The physico-chemical characterisation showed that C. cleomifolia seeds oil is unsaturated semi-drying oil, with high saponification and acidic values. The fatty acid composition of C. cleomifolia seed oil was determined by Gas Chromatography and Gas Chromatography-Mass Spectrometry (ToF). The seed oil of C. cleomifolia contained linoleic acid (57.59 %) and palmitic acid (5.07 %), the most abundant unsaturated and saturated fatty acids, respectively. The polyunsaturated triacylglycerol (TAG) in C. cleomifolia seed oil determined by reverse phase High performance Liquid Chromatography; contained as PLL (18.04 %) followed by POL + SLL (11.92 %), OOL (7.04 %) and PLLn (6.31 %). The melting and cooling point of the oil were 16.22 degree Celsius and -33.54 degree Celsius, respectively. (author)

  20. The lipidome, genotoxicity, hematotoxicity and antioxidant properties of andiroba oil from the Brazilian Amazon

    Directory of Open Access Journals (Sweden)

    Susana Suely Rodrigues Milhomem-Paixão

    2016-01-01

    Full Text Available Abstract Andirobeira is an Amazonian tree, the seeds of which produce a commercially valuable oil that is used in folk medicine and in the cosmetic industry. Andiroba oil contains components with anti-inflammatory, cicatrizing and insect-repellant actions. However, virtually nothing is known of the safety of this oil for humans. The aim of this work was therefore to investigate the hematotoxicity, genotoxicity and mutagenicity of andiroba oil using the comet and micronucleus assays, and to assess its antioxidant properties and lipidome as a means of addressing safety issues. For the experiments, andiroba oil was administered by gavage for 14 consecutive days in nulliparous female Swiss mice randomly distributed in four groups: negative control and three doses of oil (500, 1000 and 2000 mg/kg/day. These doses were chosen based on recommendations of the OECD guideline no. 474 (1997. GC/MS was used to investigate the free fatty acid, cholesterol and triterpene content of andiroba oil in a lipidomic analysis. No clinical or behavioral alterations were observed throughout the period of treatment, and exposure to andiroba oil at the doses and conditions used here did not result in hematotoxic, genotoxic or mutagenic effects. Tests in vitro showed that oil sample 3 from southwestern of Brazilian Amazon had a high antioxidant capacity that may protect biological systems from oxidative stress, although this activity remains to be demonstrated in vivo.

  1. Chemical properties and oxidative stability of Arjan (Amygdalus reuteri) kernel oil as emerging edible oil.

    Science.gov (United States)

    Tavakoli, Javad; Emadi, Teymour; Hashemi, Seyed Mohammad Bagher; Mousavi Khaneghah, Amin; Munekata, Paulo Eduardo Sichetti; Lorenzo, Jose Manuel; Brnčić, Mladen; Barba, Francisco J

    2018-05-01

    The oxidative stability, as well as the chemical composition of Amygdalus reuteri kernel oil (ARKO), were evaluated and compared to those of Amygdalus scoparia kernel oil (ASKO) and extra virgin olive oil (EVOO) during and after holding in the oven (170 °C for 8 h). The oxidative stability analysis was carried out by measuring the changes in conjugated dienes, carbonyl and acid values as well as oil/oxidative stability index and their correlation with the antioxidant compounds (tocopherol, polyphenols, and sterol compounds). The oleic acid was determined as the predominant fatty acid of ARKO (65.5%). Calculated oxidizability value and an iodine value of ARKO, ASKO and EVOO were reported as 3.29 and 3.24, 2.00 and 100.0, 101.4 and 81.9, respectively. Due to the high wax content (4.5% and 3.3%, respectively), the saponification number of ARKO and ASKO (96.4 and 99.8, respectively) was lower than that of EVOO (169.7). ARKO had the highest oxidative stability, followed by ASKO and EVOO. Therefore, ARKO can be introduced as a new source of edible oil with high oxidative stability. Copyright © 2018. Published by Elsevier Ltd.

  2. Impact of nanoparticles and butanol on properties and spray characteristics of waste cooking oil biodiesel and pure rapeseed oil

    Directory of Open Access Journals (Sweden)

    Ahmad K. H.

    2017-01-01

    Full Text Available Renewable biofuels can offset greenhouse gases by replacing fossil fuels destined for internal combustion engines. However, biofuels have their own setbacks and may lead to poor combustion inside the engine cylinder. In this study, nanoparticles and butanol were blended either separately or together with waste cooking oil biodiesel and neat rape seed oil to investigate the impact of these additives on the properties and spray characteristics. The investigation comprised of three stages, with each having an effect on how the next stage of the investigation was conducted. Initially, the physicochemical characteristics of 25ppm, 50ppm, 75ppm and 100ppm concentrations of aluminium oxide and copper oxide nanoparticle blends with fossil diesel, waste cooking oil biodiesel and rapeseed oil were investigated. The results from first stage investigation showed that, in general, blends containing aluminium oxide nanoparticles gave better results for almost all the concentrations when compared with copper oxide nanoparticle blends with the same nanoparticle concentrations. Overall, waste cooking oil biodiesel blended with 100ppm aluminium oxide nanoparticle showed most promising results like the flash point of 159.3°C, kinematic viscosity @40°C of 4.66 cSt, and gross calorific value of 44.43 MJ/kg. These values were 61.6% higher, 51.3% higher and 3.2% lower than that of corresponding fossil diesel values. Subsequently, in the second stage of the study, the addition of butanol was investigated to assess its ability to enhance the emulsion of biofuel-nanoparticles blends. Four blends containing 90% biodiesel & 10% butanol, and 90% rapeseed oil & 10% butanol, with and without 100ppm Al2O3 were prepared. Results showed that the kinematic viscosity of the fuel blends containing 100ppm aluminium oxide nanoparticles were decreased by 0.4% and 3.3%, for 90% biodiesel & 10% butanol and 90% rapeseed oil & 10% butanol blends respectively, when compared to without

  3. Impact of nanoparticles and butanol on properties and spray characteristics of waste cooking oil biodiesel and pure rapeseed oil

    Science.gov (United States)

    Ahmad, K. H.; Hossain, A. K.

    2017-11-01

    Renewable biofuels can offset greenhouse gases by replacing fossil fuels destined for internal combustion engines. However, biofuels have their own setbacks and may lead to poor combustion inside the engine cylinder. In this study, nanoparticles and butanol were blended either separately or together with waste cooking oil biodiesel and neat rape seed oil to investigate the impact of these additives on the properties and spray characteristics. The investigation comprised of three stages, with each having an effect on how the next stage of the investigation was conducted. Initially, the physicochemical characteristics of 25ppm, 50ppm, 75ppm and 100ppm concentrations of aluminium oxide and copper oxide nanoparticle blends with fossil diesel, waste cooking oil biodiesel and rapeseed oil were investigated. The results from first stage investigation showed that, in general, blends containing aluminium oxide nanoparticles gave better results for almost all the concentrations when compared with copper oxide nanoparticle blends with the same nanoparticle concentrations. Overall, waste cooking oil biodiesel blended with 100ppm aluminium oxide nanoparticle showed most promising results like the flash point of 159.3°C, kinematic viscosity @40°C of 4.66 cSt, and gross calorific value of 44.43 MJ/kg. These values were 61.6% higher, 51.3% higher and 3.2% lower than that of corresponding fossil diesel values. Subsequently, in the second stage of the study, the addition of butanol was investigated to assess its ability to enhance the emulsion of biofuel-nanoparticles blends. Four blends containing 90% biodiesel & 10% butanol, and 90% rapeseed oil & 10% butanol, with and without 100ppm Al2O3 were prepared. Results showed that the kinematic viscosity of the fuel blends containing 100ppm aluminium oxide nanoparticles were decreased by 0.4% and 3.3%, for 90% biodiesel & 10% butanol and 90% rapeseed oil & 10% butanol blends respectively, when compared to without the nanoparticles. The

  4. A critical appraisal of the zero-multipole method: Structural, thermodynamic, dielectric, and dynamical properties of a water system

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Han, E-mail: wang-han@iapcm.ac.cn [CAEP Software Center for High Performance Numerical Simulation, Huayuan Road 6, 100088 Beijing, China and Zuse Institute Berlin (ZIB), Berlin (Germany); Nakamura, Haruki [Institute for Protein Research, Osaka University, 3-2 Yamadaoka, Suita, Osaka 565-0871 (Japan); Fukuda, Ikuo, E-mail: ifukuda@protein.osaka-u.ac.jp [Institute for Protein Research, Osaka University, 3-2 Yamadaoka, Suita, Osaka 565-0871 (Japan); RIKEN (The Institute of Physical and Chemical Research), 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan)

    2016-03-21

    We performed extensive and strict tests for the reliability of the zero-multipole (summation) method (ZMM), which is a method for estimating the electrostatic interactions among charged particles in a classical physical system, by investigating a set of various physical quantities. This set covers a broad range of water properties, including the thermodynamic properties (pressure, excess chemical potential, constant volume/pressure heat capacity, isothermal compressibility, and thermal expansion coefficient), dielectric properties (dielectric constant and Kirkwood-G factor), dynamical properties (diffusion constant and viscosity), and the structural property (radial distribution function). We selected a bulk water system, the most important solvent, and applied the widely used TIP3P model to this test. In result, the ZMM works well for almost all cases, compared with the smooth particle mesh Ewald (SPME) method that was carefully optimized. In particular, at cut-off radius of 1.2 nm, the recommended choices of ZMM parameters for the TIP3P system are α ≤ 1 nm{sup −1} for the splitting parameter and l = 2 or l = 3 for the order of the multipole moment. We discussed the origin of the deviations of the ZMM and found that they are intimately related to the deviations of the equilibrated densities between the ZMM and SPME, while the magnitude of the density deviations is very small.

  5. A critical appraisal of the zero-multipole method: Structural, thermodynamic, dielectric, and dynamical properties of a water system.

    Science.gov (United States)

    Wang, Han; Nakamura, Haruki; Fukuda, Ikuo

    2016-03-21

    We performed extensive and strict tests for the reliability of the zero-multipole (summation) method (ZMM), which is a method for estimating the electrostatic interactions among charged particles in a classical physical system, by investigating a set of various physical quantities. This set covers a broad range of water properties, including the thermodynamic properties (pressure, excess chemical potential, constant volume/pressure heat capacity, isothermal compressibility, and thermal expansion coefficient), dielectric properties (dielectric constant and Kirkwood-G factor), dynamical properties (diffusion constant and viscosity), and the structural property (radial distribution function). We selected a bulk water system, the most important solvent, and applied the widely used TIP3P model to this test. In result, the ZMM works well for almost all cases, compared with the smooth particle mesh Ewald (SPME) method that was carefully optimized. In particular, at cut-off radius of 1.2 nm, the recommended choices of ZMM parameters for the TIP3P system are α ≤ 1 nm(-1) for the splitting parameter and l = 2 or l = 3 for the order of the multipole moment. We discussed the origin of the deviations of the ZMM and found that they are intimately related to the deviations of the equilibrated densities between the ZMM and SPME, while the magnitude of the density deviations is very small.

  6. extraction and physico chemical properties of some edible seed oils

    African Journals Online (AJOL)

    User

    The free fatty acids values ranged from 0.096mgKOH/g – 1.34mgKOH/g. The results of these ... Nutritional and industrial processes have increased the demands for oils ..... Sarwar, M. (2013): The theatrical usefulness of olive. Oleaeuropaea L.

  7. The Effects of Dehulling on Physicochemical Properties of Seed Oil ...

    African Journals Online (AJOL)

    Oil yield from dehulled seeds was significantly higher (31−35.1%) than the yield from ... in dark containers (wrapped with aluminium foil) and stored at 4°C to allow .... High refractive preliminary confirms the availability of differences in fatty.

  8. Composition and antimicrobial properties of essential oil of ...

    African Journals Online (AJOL)

    GC-MS analysis of essential oil obtained from the seed of Foeniculum vulgare showed the presence of 31 components containing 95.2% of the total amount and the major component was trans-anethole (70.1%). The analysis of ethanolic and methanolic seed extracts showed the presence of nine components including ...

  9. Composition and antimicrobial properties of essential oil of ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-17

    Dec 17, 2008 ... GC-MS analysis of essential oil obtained from the seed of Foeniculum vulgare showed the presence of. 31 components containing 95.2% of the total amount and the major component was trans-anethole. (70.1%). The analysis of ethanolic and methanolic seed extracts showed the presence of nine.

  10. COMPARISON OF PHYSICAL STABILITY PROPERTIES OF POMEGRANATE SEED OIL NANOEMULSION DOSAGE FORMS WITH LONG-CHAIN TRIGLYCERIDE AND MEDIUM-CHAIN TRIGLYCERIDE AS THE OIL PHASE

    Directory of Open Access Journals (Sweden)

    Sri Hartanti Yuliani

    2016-08-01

    Full Text Available Pomegranate seed oil has antioxidant, anti-inflammatory, and chemo preventive activities. Pomegranate seed oil is lipophilic substance suitable to be prepared in emulsion dosage forms. Long-chain triglyceride (LCT and medium-chain triglyceride (MCT are commonly used as oil phase in emulsion dosage forms. This research aimed to compare the use of LCT and MCT in the Nano emulsion formula of pomegranate seed oil dosage forms. Formulation of pomegranate seed oil Nano emulsion was conducted using high energy emulsification. Parameters observed were pH, Nano emulsion type, percent transmittance, viscosity, turbidity, and droplet size before and after 3 cycles of freeze-thaw. The result showed that there was no significant difference between physical properties of pomegranate oil Nano emulsion with LCT as oil phase and pomegranate oil Nano emulsion with MCT as oil phase. Moreover, physical stability of pomegranate oil Nano emulsion with LCT as oil phase was better than pomegranate oil Nano emulsion with MCT as oil phase.

  11. Oxidative stability, chemical composition and organoleptic properties of seinat (Cucumis melo var. tibish) seed oil blends with peanut oil from China.

    Science.gov (United States)

    Siddeeg, Azhari; Xia, Wenshui

    2015-12-01

    Seinat seed oil was blended with peanut oil for the enhancement of stability and chemical characteristics of the blend. The physicochemical properties (relative density, refractive index, free fatty acids, saponification value, iodine value and peroxide value) of seinat seed and peanut oil blends in ratios 95:5, 85:15, 30:70 and 50:50 proportions were evaluated, as well as oxidative stability index, deferential scanning calorimetric (DSC) characteristics and tocopherols content. Results of oil blend showed that there was no negative effect by the addition of seinat seed oil to peanut oil and also had decreased percentages of all saturated fatty acids except stearic acid, conversely, increased the levels of unsaturated fatty acids. As for the sensory evaluation, the panelist results showed that seinat seed oil blends had no significant differences (p blending of seinat seed oil with peanut oil had also increased the stability and tocopherols content. As Sudan is the first producer of seinat oil, blending of seinat seed oil with traditional oil like quality, and may decrease the consumption of other expensive edible oils.

  12. Physicochemical Properties and Fatty Acid Profiles of Elaeagnus mollis Diels Nut Oils.

    Science.gov (United States)

    Liang, Shaohua; Yang, Ruinan; Dong, Caiwen; Yang, Qingping

    2015-01-01

    The physicochemical properties, fatty acid profiles, content of tocopherol and sterol of the oils extracted from the nuts of Elaeagnus mollis Diels grown in different regions of China were studied in this work. The results indicated that the Elaeagnus mollis Diels nut oils contained about 0.2% sterols and the tocopherol contents were in the range of 119.6-128.6mg/100g. The nut oils were all rich in unsaturated fatty acids, especially oleic acid and linoleic acid. Furthermore, the main triacylglycerols species of the nut oils were all dilinoleoyl-monoolein (LOL), dioleoyl-monolinoleoyl (OLO) and trilinoleate (LLL). This work might be useful for developing applications for Elaeagnus mollis Diels nut oil.

  13. Study of polyacrylamide-surfactant system on the water–oil interface properties and rheological properties for EOR

    Directory of Open Access Journals (Sweden)

    S.Z. Mahdavi

    2017-12-01

    Full Text Available Nowadays, due to the remarkable oil reduction in oil fields, enhanced oil recovery (EOR techniques have been considered by a large number of scientists and company. Situ oil extraction is normally done by these techniques with high efficiency. In this particular study, five different surface active agents (surfactant, two kinds of oil with various API, two kinds of sulfonated polyacrylamide, two different electrolyte solutions with various TDS and two distinctive alcohols were tested and evaluated. An optimal formulation in terms of the properties and quantity of materials has to be used in order to enhance oil recovery, achieved by investigation of surface tension and the phase behavior of mentioned substances. Rheological behavior of polymer flooding and surfactant was studied. Employing this formulation, the maximum micro emulsion of oil in water occurred. Due to the synergy between surfactant and alcohol (as a co-surfactant, relatively lower amounts of surfactants were used which led to the dip in the cost of operation, and ultimately the efficiency of operation improved.

  14. Simulation of an oil film at the sea surface and its radiometric properties in the SWIR

    Science.gov (United States)

    Schwenger, Frédéric; Van Eijk, Alexander M. J.

    2017-10-01

    The knowledge of the optical contrast of an oil layer on the sea under various surface roughness conditions is of great interest for oil slick monitoring techniques. This paper presents a 3D simulation of a dynamic sea surface contaminated by a floating oil film. The simulation considers the damping influence of oil on the ocean waves and its physical properties. It calculates the radiance contrast of the sea surface polluted by the oil film in relation to a clean sea surface for the SWIR spectral band. Our computer simulation combines the 3D simulation of a maritime scene (open clear sea/clear sky) with an oil film at the sea surface. The basic geometry of a clean sea surface is modeled by a composition of smooth wind driven gravity waves. Oil on the sea surface attenuates the capillary and short gravity waves modulating the wave power density spectrum of these waves. The radiance of the maritime scene is calculated in the SWIR spectral band with the emitted sea surface radiance and the specularly reflected sky radiance as components. Wave hiding and shadowing, especially occurring at low viewing angles, are considered. The specular reflection of the sky radiance at the clean sea surface is modeled by an analytical statistical bidirectional reflectance distribution function (BRDF) of the sea surface. For oil at the sea surface, a specific BRDF is used influenced by the reduced surface roughness, i.e., the modulated wave density spectrum. The radiance contrast of an oil film in relation to the clean sea surface is calculated for different viewing angles, wind speeds, and oil types characterized by their specific physical properties.

  15. Effects of oil content on the sensory, textural, and physical properties of pecan butter (Carya illinoinensis).

    Science.gov (United States)

    Wagener, Emily A; Kerr, William L

    2017-10-20

    It has been difficult to produce acceptable pecan butters as the high oil content results in a product that flows and separates too easily. The objective of this work was to create pecan butters with varying oil levels (50-70%) and determine which would give the most acceptable product. Consumers rated pecan butters with 55-60% oil the most acceptable, whether roasted or not. Acceptability varied most in terms of texture and spreadability, but not flavor. Under large deformation firmness varied from 51.8 g (70% oil) to 4,880 g (50%) oil, while "spreadability" ranged from 19.2 to 7748 (g/s). Samples with 70% oil had the lowest viscosity and were Newtonian. Pecan butters with 50-55% oil had high viscosity and were shear thinning. Yield stress decreased with oil content, ranging from 0.014 to 500 Pa. The storage modulus (G') increased from ∼7 Pa for samples with 70% oil up to 260,000 Pa for those with 50% oil. In conjunction, tan δ decreased from 1 to 0.07, showing the products take on much more solid-like behavior as oil is removed. In conclusion, the rheological properties of pecan butter were quite sensitive to the amount of oil in the product. Differences in acceptability were primarily due to "texture" and "spreadability," suggesting there is a limited range of firmness and spreadability that consumers will deem acceptable. There has been considerable demand for butters and spreads made from a variety of culinary nuts. Pecans generally have too much oil (∼70%) to make a product with proper consistency and stability. In this study, some of the oil was removed to overcome this problem. It was found that pecan butter with 55-60% oil was most acceptable to consumers and with the level of firmness, yield stress, and spreadability most similar to commercial nut butters. The oil was relatively simple to remove from unroasted nuts, thus manufacturers could easily produce more acceptable pecan butter for the market. © 2017 Wiley Periodicals, Inc.

  16. Mechanical and thermal properties of castor oil polyurethane bone cement after gamma irradiation

    International Nuclear Information System (INIS)

    Azevedo, E.C.; Chierice, G.O.; Claro Neto, S.; Lepiesnki, C.M.; Nascimento, E.M.

    2009-01-01

    Polyurethanes from castor oil are being employed as bone cement in medical applications. In this work the thermal and mechanical properties of gamma irradiated polyurethanes derivative from castor oil were investigated by instrumented indentation, thermogravimetry and scanning electron microscopy. A slightly increase in hardness is observed only for doses as high as 100 kGy. Thermal analysis indicates stability at human body temperature. The glass transition temperature has small changes after gamma irradiation. (author)

  17. Properties and antioxidant activity of fish skin gelatin film incorporated with citrus essential oils.

    Science.gov (United States)

    Tongnuanchan, Phakawat; Benjakul, Soottawat; Prodpran, Thummanoon

    2012-10-01

    Properties of protein-based film from fish skin gelatin incorporated with different citrus essential oils, including bergamot, kaffir lime, lemon and lime (50% based on protein) in the presence of 20% and 30% glycerol were investigated. Films containing 20% glycerol had higher tensile strength (TS) but lower elongation at break (EAB), compared with those prepared with 30% glycerol, regardless of essential oils incorporated (pfish skin. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. The Effects of Spent Engine Oil on Soil Properties and Growth of ...

    African Journals Online (AJOL)

    The effect of spent engine oil (SEO) on soil properties and growth of maize (Zea mays L.) was investigated. Five treatments (0.0, 0.2, 0.4, 0.6 and 0.8 l/kg) of the spent oil were applied to soil in perforated poly bags with maize stands at four weeks after sowing. Soil analysis showed that SEO had no effect on both the pH and ...

  19. Pysical Properties of Soil with Addition of Sewage Dried with Heated Edible Oil

    OpenAIRE

    大坪, 政美; 中司, 敬; 中園, 修三; 中園, 英司; 徳留, 斉将

    2000-01-01

    The present study investigates the water holding capacity, density, permeability, and swelling properties of the soil samples mixed with the sewage that was dried with heated edible oil. For comparison similar experiments were conducted for the soil samples mixed with sun-dried sewage and sewage compost. The water holding capacity was higher for the soil samples with oil-dried and sun-dried sewage addition than for those with sewage-compost addition. For statically compacted soil samples, wit...

  20. Modifying the properties of whey protein isolate edible film by incorporating palm oil and glycerol

    Directory of Open Access Journals (Sweden)

    Vachiraya Liaotrakoon

    2018-02-01

    Full Text Available This study aimed to improve the properties of whey protein isolate (WPI films by incorporating palm oil (6, 7, and 8% w/w and glycerol (40, 50 and 60% w/w. The lightness of the films increased as glycerol levels increased, but the redness increased with the increased amount of oil content. Increasing the amounts of palm oil and glycerol improved flexibility (P<0.05, but reduced the strength of the film (P<0.05. Films with higher levels of palm oil and lower amounts of glycerol were less permeable to water vapor and oxygen, but more thermally stable. The size of particles and air bubbles in the films reduced with increased palm oil content, regardless of glycerol level. Among all formulae, the film prepared with 8% palm oil and 40% glycerol showed the best overall results. Modifying WPI films with palm oil and glycerol offers a simple technique for producing packaging with better environmental barrier properties.

  1. Physicochemical properties, fatty acid profile and antioxidant activity of peanut oil

    International Nuclear Information System (INIS)

    Shad, M.A.; Pervez, H.; Zafar, Z.I.

    2011-01-01

    The oil from seeds of 4 pea nut (Arachis hypogaea L.) varieties: Golden, Bari 2000, Mongphalla, and Mongphalli 334 cultivated in arid zones, was subjected to the comparative evaluation of its physicochemical properties, fatty acid profile and antioxidant activity. Pea nut seeds were found to be a rich source of crude fat (45.09-51.63 g/100 g dry weight). The physicochemical properties of the oil were investigated as specific gravity (0.915 +-0.008-0.918+-0.008), acid value (3.96+-0.22-4.95+-0.71 mg KOH/g oil), saponification value ( 226.40+-3.59-246.56+-2.04 mg KOH/g oil) and unsaponifiable matter (3.20 +- 0.23-4.20+-0.04 g/100 g oil). The higher amounts of unsaturated fatty acids (82.06-85.93%) were found to be present in each variety. A significant variation (p<0.05) was observed among the varieties regarding crude oil content, saponification value, oleic/linoleic (O/L) ratios, phenolic acid content and total antioxidant content. Golden was found to be high in oil content, O/L ratio, antioxidant profile and DPPH scavenging activity but low in iodine value. (author)

  2. Practice points on three aspects of oil and gas property transactions - operatorship, confidentiality and title review

    International Nuclear Information System (INIS)

    Edwards, P.D.

    1999-01-01

    Practice points regarding three aspects of oil and gas property transactions were described. The first topic dealt with purchase and sale transactions and how to determine which party is entitled to act as the Operator following the sale of the Operator's interest. The second topic addressed issues of confidentiality in connection with oil and gas transactions. The final point discussed contractual provisions relating to title defects, along with their many variations and legal consequences. All three of these topics present issues which give rise to a surprising number of disputes, but which frequently receive only cursory attention in the negotiation and documentation of oil and gas transactions

  3. Composition and Nutritional properties of Mediterranean extra-virgin olive oils

    Directory of Open Access Journals (Sweden)

    E. Tripoli

    2009-01-01

    Full Text Available Olive oil plays an important role in diet, economy and culture of Mediterranean people. Epidemiological studies have shown a lower incidence in this area. The purpose of this paper was to compare the nutritional properties of Sicilian and Cretan extra-virgin olive oils. Forty Cretan (cultivar: Koroneiki and forty-six Sicilian olive oil (cultivar: Nocellara del Belice samples are collected in the crop seasons 2003/04 and 2004/05. We estimate free acidity, peroxide value, UV absorption, total tocopherols and polyphenols amounts.

  4. Effect of agronomical practices on carpology, fruit and oil composition, and oil sensory properties, in olive (Olea europaea L.).

    Science.gov (United States)

    Rosati, Adolfo; Cafiero, Caterina; Paoletti, Andrea; Alfei, Barbara; Caporali, Silvia; Casciani, Lorena; Valentini, Massimiliano

    2014-09-15

    We examined whether some agronomical practices (i.e. organic vs. conventional) affect olive fruit and oil composition, and oil sensory properties. Fruit characteristics (i.e. fresh and dry weight of pulp and pit, oil content on a fresh and dry weight basis) did not differ. Oil chemical traits did not differ except for increased content of polyphenols in the organic treatments, and some changes in the acidic composition. Sensory analysis revealed increased bitterness (both cultivars) and pungency (Frantoio) and decreased sweetness (Frantoio) in the organic treatment. Fruit metabolomic analysis with HRMAS-NMR indicated significant changes in some compounds including glycocholate, fatty acids, NADPH, NADP+, some amino acids, thymidine, trigonelline, nicotinic acid, 5,6-dihydrouracil, hesanal, cis-olefin, β-D-glucose, propanal and some unassigned species. The results suggest that agronomical practices may have effects on fruit composition that may be difficult to detect unless a broad-spectrum analysis is used. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Effect of oil and oil with graphite on tribological properties of glass ...

    Indian Academy of Sciences (India)

    Administrator

    ground over metals in the field of engineering applica- tions in tribology. ... The wear particles have rather soft shape attributes. (Kowandya et .... Figure 2. Coefficient of friction with load for materials B, C and D in oil lubrication. 3. Results and ...

  6. Fuel properties of biodiesel produced from the crude fish oil from the soapstock of marine fish

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Cherng-Yuan; Li, Rong-Ji [Department of Marine Engineering, National Taiwan Ocean, University, Keelung 20224 (China)

    2009-01-15

    The soapstock of a mixture of marine fish was used as the raw material to produce the biodiesel in this study. The soapstock was collected from discarded fish products. Crude fish oil was squeezed from the soapstock of the fish and refined by a series of processes. The refined fish oil was transesterified to produce biodiesel. The fuel properties of the biodiesel were analyzed. The experimental results showed that oleic acid (C18:1) and palmitic acid (C16:0) were the two major components of the marine fish-oil biodiesel. The biodiesel from the mixed marine fish oil contained a significantly greater amount of polyunsaturated fatty acids than did the biodiesel from waste cooking oil. In addition, the marine fish-oil biodiesel contained as high as 37.07 wt.% saturated fatty acids and 37.3 wt.% long chain fatty acids in the range between C20 and C22. Moreover, the marine fish-oil biodiesel appeared to have a larger acid number, a greater increase in the rate of peroxidization with the increase in the time that it was stored, greater kinematic viscosity, higher heating value, higher cetane index, more carbon residue, and a lower peroxide value, flash point, and distillation temperature than those of waste cooking-oil biodiesel. (author)

  7. Fuel properties and engine performance of biodiesel from waste cooking oil collected in Dhaka city

    Science.gov (United States)

    Islam, R. B.; Islam, R.; Uddin, M. N.; Ehsan, Md.

    2016-07-01

    Waste cooking oil can be a potential source of biodiesel that has least effect on the edible oil consumption. Increasing number of hotel-restaurants and more active monitoring by health authorities have increased the generation of waste cooking oil significantly in densely populated cities like Dhaka. If not used or disposed properly, waste cooking oil itself may generate lot of environmental issues. In this work, waste cooking oils from different restaurants within Dhaka City were collected and some relevant properties of these waste oils were measured. Based on the samples studied one with the highest potential as biodiesel feed was identified and processed for engine performance. Standard trans-esterification process was used to produce biodiesel from the selected waste cooking oil. Biodiesel blends of B20 and B40 category were made and tested on a single cylinder direct injection diesel engine. Engine performance parameters included - bhp, bsfc and exhaust emission for rated and part load conditions. Results give a quantitative assessment of the potential of using biodiesel from waste cooking oil as fuel for diesel engines in Bangladesh.

  8. Comparative assessment of structural-mechanical properties of heavy oils of timano-pechorskaya province

    Directory of Open Access Journals (Sweden)

    Н. К. Кондрашева

    2017-06-01

    Full Text Available The physicochemical properties of heavy oils of Yaregskoe and Usinskoe deposits and the residues of atmospheric distillation of petroleum (fuel oil recovered from them are presented. The group composition of oil and the residues of its atmospheric distillation (fuel oil is determined. When using X-ray fluorescence energy dispersive spectrometer, the content of metals in the products is determined. A conclusion is drawn about the distribution of metals in the initial oil and fuel oil. On the basis of rheological characteristics, the type of liquids is determined in accordance with Newton's law, as well as the presence of an anomaly in the viscosity of the studied media at different temperatures. The energy values of the thixotropy of heavy oils of Usinskoe and Yaregskoe deposits, as well as the activation energy of the viscous flow of all media studied, are obtained. The phase transition of atmospheric residues at 60 °C is discovered. Dependences of the enthalpy and entropy of the viscous flow of the studied hydrocarbon media are obtained with an increase in temperature from 10 to 140 °C. The dependences of the oil molecules and atmospheric residues jumping frequency on viscosity are obtained for the first time.

  9. Essential Oil Composition, Antioxidant, Antidiabetic and Antihypertensive Properties of Two Afromomum Species.

    Science.gov (United States)

    Adefegha, Stephen Adeniyi; Olasehinde, Tosin Abiola; Oboh, Ganiyu

    2017-01-01

    This study was designed to assess the antioxidant, antidiabetic and antihypertensive effects of essential oils from A. melegueta and A. danielli seeds. The essential oils were extracted via hydrodistillation, dried with anhydrous Na 2 SO 4 and characterized using gas chromatography-mass spectrometry (GC-MS). Antioxidant properties and inhibition of some pro-oxidant induced lipid peroxidation in rats' pancreas and heart homogenates were also determined. The results revealed that eugenol, eucalyptol, α-terpineol, α-caryophyllene and β-caryophyllene were the most abundant components in A. melegueta and A. danielli seeds. The essential oils inhibited α-amylase, α-glucosidase and angiotensin-I-converting enzyme in vitro. A.melegueta oil showed a higher α-amylase and α- glucosidase inhibitory activities with EC 50 values of 139.00 µL/mL and 91.83 µL/mL respectively than A. danielli. However, A. danielli oil (EC 50 = 48.73 µL/mL) showed the highest ACE inhibitory acivity. The highest NO radical scavenging ability was observed in A. melegueta oil while A. danielli had the highest OH radical scavenging and Fe 2+ - chelating ability. Furthermore, both essential oils inhibited SNP and Fe 2+ - induced lipid peroxidation in rats' pancreas and heart respectively in a dose dependent manner. This study reveals the biochemical principle by which essential oils from A. danielli and A.melegueta seed elicits their therapeutic effects on type-2 diabetes and hypertension.

  10. A Review on Properties, Opportunities, and Challenges of Transformer Oil-Based Nanofluids

    Directory of Open Access Journals (Sweden)

    Muhammad Rafiq

    2016-01-01

    Full Text Available The mineral oil or synthetic oil in conjunction with paper is mainly being applied as dielectric medium in many of the high voltage apparatus. However, the advent of high voltage levels such high voltage alternating current (HVAC and high voltage direct current (HVDC has prompted researchers to direct their focus onto an insulation system which can bear the rising high voltage levels. The modern insulating liquid material development is guided by various factors such as high electrical insulation requirements and other safety and economic considerations. Therefore transformer manufacturer companies have to design transformers with these new specific requirements. The transformer oil-based nanofluids with improved dielectric and thermal properties have the potential to replace mineral oil base products in the market place. They are favorable because they function more superior than mineral oil and they contribute definite insulating and thermal gains. This paper reviews recent status of nanofluids use as transformer oils. The nanofluids used as transformer oils are presented and their advantages are described in comparison with mineral oil. The multiple experimental works carried out by different researchers are described, providing an overview of the current research conducted on nanofluids. In addition scope and challenges being confronted in this area of research are clearly presented.

  11. Antioxidant and chemical properties of essential oil extracted from blend of selected spices

    Directory of Open Access Journals (Sweden)

    Ochuko Lucky Erukainure

    2015-07-01

    Full Text Available Objective: To investigate the chemical properties of essential oil extracted from blends of selected Nigerian spices as well as its antioxidant protective potentials against free radical in vitro. Methods: Essential oil was extracted from selected spices blend consisting of Monodora myristica, Myristica fragrans, Tetrapleura tetraptera, and Aframomum sceptrum using a Clevenger type apparatus. Oil obtained was subjected to phytochemical and gas chromatography-mass spectrometer analysis as well as analyzed for antioxidant activity which covers for 1,1-diphenyl-2 picrylhydrazyl, nitric oxide scavenging activities and reducing property. Results: Gas chromatography-mass spectrometer analysis revealed over 50 compoundfs with α-phellandrene being the most predominant compound (27.32%, which was followed by (--β-bourbonene (15.78% and 5-(1-methylethyl-α-phellandrene (11.80%. Phytochemical analysis showed high flavonoid content and a lower phenolic content. The oil showed a dose like dependent effect on the1-diphenyl-2 picrylhydrazyl and nitric oxide scavenging activities, these activities increased with increasing concentration. The same was also observed for the reducing power properties of the oil. Conclusions: The antioxidant activities exhibited by the essential oil in vitro signify its protective potential against free radicals. The chemical constituents, α-phellandrene in particular and the studied phytochemicals may be responsible for these effects. However, in vivo study is needed to further authenticate this potency.

  12. Extraction and Assessment of Physicochemical Properties of Rosigold Mango (Mangifera indica Seed Kernel Oil for Bioresin Production

    Directory of Open Access Journals (Sweden)

    A. S. Sadiq

    2017-10-01

    Full Text Available This paper presents research report on extraction and assessment of physicochemical properties of Rosigold mango kernel oil. This is with a view to using the oil for bioresin production so as to mitigate some of the problems associated with petrochemical resins currently used for bulk of composite production activities. The seeds of the mango were identified and collected from the wastes discarded by marketers and consumers in Bauchi town. The Oil was obtained using soxhlet extraction with n-Hexane as solvent. The oil was characterized for yield, relative density, free fatty acid value, acid value, iodine value, and saponification value. Mean values of the characteristic parameters were: oil yield 19.6%, relative density 0.874 g/cm3, free fatty acid value 3.09 mg NaOH/g oil, acid value 6.18 mg KOH/g oil, iodine value 60.7 mg iodine/100 g oil and saponification value 143.6 mg KOH/ g oil. Analysis and comparison of these results with the physicochemical properties of palm oil, Soya bean oil and Hemp seed oil respectively, revealed that the iodine value of Rosigold mango seed kernel oil is higher than palm oil, but lower than Soya bean and Hemp seed oils respectively. Bioresin production is heavily dependent on the degree of unsaturation of the oil which is reflected by the iodine value. However, the overall results suggested that Rosigold mango seed kernel oil is suitable for bioresin production since the minimum iodine bench mark for renewable oil suitable for bioresin production is 50 mg iodine/100 g oil. The extracted oil has an added advantage in that the source (mango seed is a waste material that is readily available, affordable and sustainable in Nigeria and many other countries.

  13. Buying and selling oil and gas properties in Saskatchewan

    International Nuclear Information System (INIS)

    Lothian, E.C.

    1997-01-01

    During the last five years, Saskatchewan has experienced its highest level of activity in the oil and gas industry, in terms of drilling and land acquisition. This study reviewed the unique concerns and issues affecting the acquisition or disposition of oil and gas assets in Saskatchewan. The two separate and distinct land registry systems regarding mines and mineral interests in Saskatchewan, due diligence issues, title and leasehold opinions and their limitations and environmental liabilities issues management were described. Some basic principles of contract law such as registration issues with respect to GOR's, and builder's lien pitfalls, as well as legal issues created by horizontal drilling, and legal issues associated with a Right of First Refusal, were also explained

  14. Lipid technology: Property prediction and process design/analysis in the edible oil and biodiesel industries

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Gani, Rafiqul; Sarup, Bent

    2011-01-01

    acid methyl esters); their representation and classification in terms of molecular structures; the collection of available experimental data of their pure component physical properties; the adoption of appropriate property-process models for the design and analysis of production processes through......In this work some of the property related issues in lipid processing technology employed in edible oil and biodiesel production are highlighted. This includes the identification of the most representative chemical species (acylglycerides, free fatty acids, tocopherols, sterols, carotenes, and fatty...

  15. Preliminary Study of Water Repellent Properties of Red Pepper Seed Oil

    Science.gov (United States)

    Kurniawan, F.; Madurani, K. A.; Wahyulis, N. C.

    2017-03-01

    The water-repellent properties of red pepper seed oil (capsicol) have been studied. The oil was coated on the glass surface by spray technique. Water repellent properties were performed by measuring the contact angle of water droplets. The measurement was conducted by varying the drying time of the oil coating at room temperature. The optimum contact angle of the droplets on the glass with capsicol coating is 46.77°, which can be achieved in 30 min of drying time. It also obtained the smallest diameter of the droplets (0.47 cm). The longer drying time decrease the contact angles and increases the diameter. The results were compared with the bare glass and commercial water repellent. The contact angle of the droplets on the glass surface with capsicol coating is higher than bare glass, but lower than glass with commercial water repellent coating. It means that capsicol has the water-repellent properties.

  16. Stable dispersion of nanodiamonds in oil and their tribological properties as lubricant additives

    Science.gov (United States)

    Lee, Gyoung-Ja; Park, Jin-Ju; Lee, Min-Ku; Rhee, Chang Kyu

    2017-09-01

    Nanodiamonds (NDs) are innovative additives when a combination of mechanical, thermal, tribological, and dielectric properties are required. In this study, a surface modification with oleic acid (OA) is developed for the deaggregation and prolonged dispersion of NDs in oil, and the effect of the NDs as lubricant additives on the tribological properties of a steel substrate is investigated. The OA renders the ND surface hydrophobic and decreases the average particle size from 268.6 to 20.1 nm. The OA-treated NDs exhibit very stable dispersion in oil even after more than 10 days, compared with the untreated NDs. From the analyses of the friction coefficient, wear loss, and worn surfaces using a ball-on-disk wear test, it is concluded that a 0.05 wt% addition of OA-treated NDs in oil lubricant provides excellent friction and anti-wear properties with the friction coefficient being reduced by 23%.

  17. Measurements of physical properties during transesterification of soybean oil to biodiesel for prediction of reaction progress

    International Nuclear Information System (INIS)

    Moradi, G.R.; Dehghani, S.; Ghanei, R.

    2012-01-01

    Highlights: ► Reaction progress in transesterification of soybean oil predicted using physical properties. ► Transesterification performed at 70 °C with Me/oil ratio 12:1 and 5 wt.% of BaO as catalyst. ► Viscosity and refractive index decreases nonlinearly during the progress of transesterification. ► Pour point increases linearly and cloud point increases nonlinearly during progress of reaction. ► Refractive index and pour point recommended for prediction transesterification progress. - Abstract: Biodiesel is a pure, non-toxic, biodegradable, clean-burning fuel and renewable alternative for fossil diesel fuel. In this work, a new method was introduced to determine reaction progress in transesterification of soybean oil to biodiesel by the use of physical property variation during reaction. Quantitative analysis stage for determination fatty acid methyl ester (FAME) which is expensive and time-consuming can be replaced by this method. To develop the method, in the first stage, transesterification of soybean oil at optimum conditions (70 °C with MeOH to oil molar ratio of 12:1 and 5 wt.% of BaO as catalyst) was carried out to determine how conversion and physical properties change with time. Then appropriate functions were fitted on the extracted data and were evaluated by comparison with GC results. Refractive index was selected as good physical property to predict reaction progress.

  18. Bioactive properties of faveleira (Cnidoscolus quercifolius) seeds, oil and press cake obtained during oilseed processing.

    Science.gov (United States)

    Ribeiro, Penha Patrícia Cabral; Silva, Denise Maria de Lima E; Assis, Cristiane Fernandes de; Correia, Roberta Targino Pinto; Damasceno, Karla Suzanne Florentino da Silva Chaves

    2017-01-01

    To the best of our knowledge, this is the first report in the literature concerning the bioactive properties of faveleira products. This work focuses on the physicochemical evaluation of faveleira oil, as well as it investigates the bioactive properties of faveleira seeds, faveleira oil and the press cake obtained during the oilseed processing. The seeds were cold pressed and the following tests were performed: physicochemical characteristics (acidity, peroxide values, moisture and volatile matter, density and viscosity) and fatty acid profile of faveleira oil; total phenolic and flavonoid content of faveleira seed and press cake; antibacterial activity of seed, oil and press cake; and antioxidant activity (DPPH radical scavenging activity, reducing power assay, total antioxidant capacity, superoxide radical scavenging assay and oxygen radical absorbance capacity) of seed, oil and press cake. Our work demonstrated that the faveleira seed oil has low acidity (0.78 ± 0.03% oleic acid) and peroxide value (1.13 ± 0.12 mEq/1000g), associated with the relevant concentration of linoleic acid (53.56%). It was observed that important phenolics (398.89 ± 6.34 mg EAG/100 g), especially flavonoids (29.81 ± 0.71 mg RE/g) remain in the press cake, which indicates that the by-product of the faveleira oilseed production constitutes a rich residual source of bioactive compounds. No bacterial growth inhibition was detected, but all samples including faveleira seeds, press cake, oil and its fractions have potent antioxidant activities, mainly the press cake, with oxygen radical absorbance capacity of 28.39 ± 4.36 μM TE/g. Our results also show that faveleira oil has potential to be used as edible oil and the press cake should be used to contain the most antioxidants from seed.

  19. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    OpenAIRE

    S. Bhaumik; S.D Pathak

    2016-01-01

    The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM) images. The present test results predict that the antiwear and extreme pressure properties in case of the sele...

  20. Growth regulating properties of isoprene and isoprenoid-based essential oils.

    Science.gov (United States)

    Jones, Andrew Maxwell P; Shukla, Mukund R; Sherif, Sherif M; Brown, Paula B; Saxena, Praveen K

    2016-01-01

    Essential oils have growth regulating properties comparable to the well-documented methyl jasmonate and may be involved in localized and/or airborne plant communication. Aromatic plants employ large amounts of resources to produce essential oils. Some essential oils are known to contain compounds with plant growth regulating activities. However, the potential capacity of essential oils as airborne molecules able to modulate plant growth/development has remained uninvestigated. Here, we demonstrate that essential oils from eight taxonomically diverse plants applied in their airborne state inhibited auxin-induced elongation of Pisum sativum hypocotyls and Avena sativa coleoptiles. This response was also observed using five monoterpenes commonly found in essential oils as well as isoprene, the basic building block of terpenes. Upon transfer to ambient conditions, A. sativa coleoptiles resumed elongation, demonstrating an antagonistic relationship rather than toxicity. Inclusion of essential oils, monoterpenes, or isoprene into the headspace of culture vessels induced abnormal cellular growth along hypocotyls of Arabidopsis thaliana. These responses were also elicited by methyl jasmonate (MeJA); however, where methyl jasmonate inhibited root growth essential oils did not. Gene expression studies in A. thaliana also demonstrated differences between the MeJA and isoprenoid responses. This series of experiments clearly demonstrate that essential oils and their isoprenoid components interact with endogenous plant growth regulators when applied directly or as volatile components in the headspace. The similarities between isoprenoid and MeJA responses suggest that they may act in plant defence signalling. While further studies are needed to determine the ecological and evolutionary significance, the results of this study and the specialized anatomy associated with aromatic plants suggest that essential oils may act as airborne signalling molecules.

  1. Performance, carcass traits, muscle fatty acid composition and meat sensory properties of male Mahabadi goat kids fed palm oil, soybean oil or fish oil.

    Science.gov (United States)

    Najafi, M H; Zeinoaldini, S; Ganjkhanlou, M; Mohammadi, H; Hopkins, D L; Ponnampalam, E N

    2012-12-01

    This study examined the effect of palm, soybean or fish oils on the performance, muscle fatty acid composition and meat quality of goat kids. Twenty-four male Mahabadi kids (BW=19.4±1.2 kg) were divided into three groups according to liveweight and randomly allocated to one of three diets. Animals were fed ad libitum for 84 days. Different dietary fat sources had no effect on performance and/or carcass quality attributes. The soybean oil diet decreased 16:0 and 18:0 concentrations and increased 18:2 and 18:3 and the ratio of PUFA/SFA in the muscle compared with other treatments. Fish oil feeding increased 20:5 n-3 and 22:6 n-3 concentrations and decreased the ratio of n-6/n-3 in the muscle. The results demonstrate that the use of fish oil is a nutritional strategy to improve the health claimable long-chain omega-3 fatty acid content and n-6/n-3 ratio in goat meat without changing the sensory properties or colour of meat. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  2. Thermal Properties of Jojoba Oil Between 20°C and 45°C

    Science.gov (United States)

    Lara-Hernández, G.; Flores-Cuautle, J. J. A.; Hernandez-Aguilar, C.; Suaste-Gómez, E.; Cruz-Orea, A.

    2017-08-01

    Vegetable oils have been widely studied as biofuel candidates. Among these oils, jojoba ( Simmondsia chinensis) oil has attracted interest because it is composed almost entirely of wax esters that are liquid at room temperature. Consequently, it is widely used in the cosmetic and pharmaceutical industries. To date, research on S. chinensis oil has focused on to its use as a fuel and its thermal stability, and information about its thermal properties is scarce. In the present study, the thermal effusivity and conductivity of jojoba oil between 20°C and 45°C were obtained using the inverse photopyroelectric and hot-ball techniques. The feasibility of an inverse photopyroelectric method and a hot-ball technique to monitor the thermal conductivity, and the thermal effusivity of the S. chinensis is demonstrated. The thermal effusivity decreased from 538 W\\cdot s^{1/2}\\cdot m^{-2}\\cdot K^{-1} to 378 W\\cdot s^{1/2}m^{-2}\\cdot K^{-1} as the temperature increased, whereas the thermal conductivity remained the same over the temperature range investigated in this study. The obtained results provide insight into the thermal properties of S. chinensis oil between 20°C and 45°C.

  3. The effect of power intensity properties of microwave modified oil palm trunk lumber

    Science.gov (United States)

    Izzati Ibrahim, Anis; Salim, Nurjannah; Roslan, Rasidi; Ashry Jusoh, Mohammad; Hashim, Rokiah

    2018-04-01

    In the decade, oil palm (Elaeis guineensis) in Malaysia is one of the conventional sources that will be rising, and the rate of biomass will considerably increase in yet to come. Presently, oil palm biomass is going through research and development and appears to be the most sustainable alternative. Investigations on oil palm biomass have been conducted to support in draw out waste of oil palm and in the meantime can help economic yield to the country. This study was expected to estimate the effect of power intensity properties of microwave modified oil palm trunk lumber. Microwave treatment of oil palm trunk samples was set of connections by using a microwave operating at 2.45 GHz with the liberated process input power intensity (600-1000W) were studied under the given condition. Impact and compression of the samples were tested. The analysis of properties of the fresh material and dry samples was employed by scanning electron microscopy. Oven drying technique also was involved as a comparison of the conventional drying process in this research. Based on the outcomes of this study, both drying methods improved the characteristics of the specimens.

  4. Essential Oil Composition of Cirsium arvense L. Produced in Different Climate and Soil Properties

    Directory of Open Access Journals (Sweden)

    Narges Amiri

    2018-05-01

    Full Text Available This study investigated the quantitative and qualitative effects of climate and soil properties on essential oil content and composition of Cirsium arvense L. (Asteraceae, which is an important medicinal plant. Root, stem, and leaf tissues were collected from plants found in four regions (Shahrekord, Farsan, Chelgerd and Ardal of the Chaharmahal and Bakhtiari Province, Iran. GC/MS analysis revealed that the main constituents of essential oils from the various populations were nonadecane, β-citronellol, camphor, heneicosane and phytol. The highest levels of nonadecane (40.1-42% and camphor (18.1-18.4% were obtained from roots collected from the Chelgerd region, the most levels of β-citronellol (24.9-25.01% were obtained from leaves from the Chelgerd region, and the most levels of heneicosane (14.4-15.6% and phytol (11.8-12.58% were obtained from stems from the Shahrekord region. The most amount of essential oil (0.34-0.33% was obtained from roots growing in clay soil in the Chelgerd region. Both climate and soil properties had significant effects on the essential oil of C. arvense. The highestt essential oil contents were obtained from plants growing in clay soil, which seemed to have a greater capacity to hold water and nutrients, both of which promote plant growth and essential oil production.

  5. Experimental investigation on fuel properties of biodiesel prepared from cottonseed oil

    Science.gov (United States)

    Payl, Ashish Naha; Mashud, Mohammad

    2017-06-01

    In recent time's world's energy demands are satisfied by coal, natural gas as well as petroleum though the prices of these are escalating. If this continues, global recession is unavoidable and diminution of world reserve accelerates undoubtedly. Recently, Biodiesel is found to be more sustainable, non-toxic and energy efficient alternative which is also biodegradable. The use of biofuels in compression ignition engines is now a contemplation attention in place of petrochemicals. In view of this, cottonseed oil is quite a favorable candidate as an alternative fuel. The present study covers the various aspects of biodiesels fuel prepared from cottonseed oil. In this work Biodiesel was prepared from cottonseed oil through transesterification process with methanol, using sodium hydroxide as catalyst. The fuel properties of cottonseed oil methyl esters, kinematic viscosity, flash point, density, calorific value, boiling point etc. were evaluated and discussed in the light of Conventional Diesel Fuel. The properties of biodiesel produced from cotton seed oil are quite close to that of diesel except from flash point. And so the methyl esters of cottonseed oil can be used in existing diesel engines without any modifications.

  6. Effects of composition and processing conditions on morphology and properties of thermoplastic elastomer blends of SEBS-PP-Oil and dynamically vulcanized EPDM-PP-Oil

    NARCIS (Netherlands)

    Sengupta, P.; Noordermeer, Jacobus W.M.

    2004-01-01

    This work presents a comparative study of the morphology and structure-related properties of thermoplastic elastomer blends based on SEBS-PP-oil and dynamically vulcanized EPDM-PP-oil prepared under identical conditions. Compositions of each blend type with three different SEBS-PP and EPDM-PP ratios

  7. Formulation, Characterization and Properties of Hemp Seed Oil and Its Emulsions

    Directory of Open Access Journals (Sweden)

    Veronika Mikulcová

    2017-04-01

    Full Text Available The formulation, characterization, and anticipated antibacterial properties of hemp seed oil and its emulsions were investigated. The oil obtained from the seeds of Cannabis sativa L. in refined and unrefined form was characterized using iodine, saponification, acid values, and gas chromatography, and was employed for the preparation of stable oil-in-water emulsions. The emulsions were prepared using pairs of non-ionic surfactants (Tween, Span. The effects of the emulsification method (spontaneous emulsification vs. high-intensity stirring, hydrophilic lipophilic balance (HLB, type and concentration of surfactant, and oil type on the size and distribution of the emulsion particles were investigated. It was found that the ability to form stable emulsions with small, initial particle sizes is primarily dependent on the given method of preparation and the HLB value. The most efficient method of emulsification that afforded the best emulsions with the smallest particles (151 ± 1 nm comprised the high-energy method, and emulsions stable over the long-term were observed at HBL 9 with 10 wt % concentration of surfactants. Under high-intensity emulsification, refined and unrefined oils performed similarly. The oils as well as their emulsions were tested against the growth of selected bacteria using the disk diffusion and broth microdilution methods. The antibacterial effect of hemp seed oil was documented against Micrococcus luteus and Staphylococcus aureus subsp. aureus. The formulated emulsions did not exhibit the antibacterial activity that had been anticipated.

  8. Effect of Coating Palm Oil Clinker Aggregate on the Engineering Properties of Normal Grade Concrete

    Directory of Open Access Journals (Sweden)

    Fuad Abutaha

    2017-10-01

    Full Text Available Palm oil clinker (POC is a waste material generated in large quantities from the palm oil industry. POC, when crushed, possesses the potential to serve as an aggregate for concrete production. Experimental investigation on the engineering properties of concrete incorporating POC as aggregate and filler material was carried out in this study. POC was partially and fully used to replace natural coarse aggregate. The volumetric replacements used were 0%, 20%, 40%, 60%, 80%, and 100%. POC, being highly porous, negatively affected the fresh and hardened concrete properties. Therefore, the particle-packing (PP method was adopted to measure the surface and inner voids of POC coarse aggregate in the mixtures at different substitution levels. In order to enhance the engineering properties of the POC concrete, palm oil clinker powder (POCP was used as a filler material to fill up and coat the surface voids of POC coarse, while the rest of the mix constituents were left as the same. Fresh and hardened properties of the POC concrete with and without coating were determined, and the results were compared with the control concrete. The results revealed that coating the surface voids of POC coarse with POCP significantly improved the engineering properties as well as the durability performance of the POC concrete. Furthermore, using POC as an aggregate and filler material may reduce the continuous exploitation of aggregates from primary sources. Also, this approach offers an environmental friendly solution to the ongoing waste problems associated with palm oil waste material.

  9. Low-temperature tar and oil: properties and applications

    Energy Technology Data Exchange (ETDEWEB)

    Heinze, R

    1942-01-01

    In Germany the value of low-temperature tar is largely dependent on its fuel fractions; these vary with the coal and the method of carbonization (external heating or recirculated gases). Brown-coal tars can be processed by distillation, cracking under pressure, hydrogenation under pressure (largest volume of tar is processed by this method) and by solvent extraction, with EtOH, SO/sub 2/, or phenol. Each of these processes is discussed in detail. In the pressure-hydrogenation process, 1.25 kilogram of brown-coal tar yields approximately 1 kilogram of gasoline with an octane number of 60 to 70. Low-temperature tars from bituminous coals can be hydrogenated readily but are not well adapted to solvent extraction. Attempts should be made to produce tar approximating the desired characteristics for fuel directly from the carbonizing apparatus. For laboratory carbonization tests, an approximation to results secured by externally heated retorts is secured by using an insert consisting of a series of perforated trays in the 200-gram Fischer aluminum retort; this reduces the capacity to 100 gram. Fractional condensation is used to separate heavy oil, middle oil, and liquor; low-boiling products are condensed at -20/sup 0/ by solid CO/sub 2/.

  10. Essential Oils Composition and Antioxidant Properties of Three Thymus Species

    Directory of Open Access Journals (Sweden)

    Hamzeh Amiri

    2012-01-01

    Full Text Available The essential oils of three wild-growing Thymus species, collected from west of Iran during the flowering stage, were obtained by hydrodistillation and analyzed by gas chromatography (GC and gas chromatography/mass spectrometry (GC-MS. Under the optimum extraction and analysis conditions, 44, 38, and 38 constituents (mainly monoterpenes compounds were identified in T. kotschyanus Boiss. and Hohen, T. eriocalyx (Ronniger Jalas, and T. daenensis subsp lancifolius (Celak Jalas which represented 89.9%, 99.7%, and 95.8% of the oils, respectively. The main constituents were thymol (16.4–42.6%, carvacrol (7.6–52.3%, and γ-terpinene (3–11.4%. Antioxidant activity was employed by two complementary test systems, namely, 2,2-diphenyl-1-picrylhydrazyl (DPPH free-radical scavenging and β-carotene/linoleic acid systems. Antioxidant activity of polar subfraction of T. daenensis subsp lancifolius (Celak Jalas was found to be higher than those of the others in DPPH assay, while nonpolar subfraction of T. eriocalyx (Ronniger Jalas has most antioxidant activity in β-carotene/linoleic acid test (19.1±0.1 μg/mL and 96.1±0.8% inhibition rate, resp..

  11. Improving magnetic properties of MgB{sub 2} bulk superconductors by synthetic engine oil treatment

    Energy Technology Data Exchange (ETDEWEB)

    Taylan Koparan, E., E-mail: etaylan20@gmail.com [Department of Science Education, Eregli Faculty of Education, Bulent Ecevit University, TR-67300, Zonguldak (Turkey); Savaskan, B. [Energy Systems Engineering, Faculty of Technology, Karadeniz Technical University, 61830, Of, Trabzon (Turkey); Yanmaz, E. [Department of Mechatronics, Faculty of Engineering and Architecture, İstanbul Gelişim University, İstanbul (Turkey)

    2016-08-15

    Highlights: • The effects of synthetic engine oil treatment on magnetic properties of bulk MgB{sub 2} superconductors has been first time investigated and reported. • Synthetic engine oil used as a product which is cheap and a rich carbon source obviously has improved the superconducting magnetic properties of MgB{sub 2}. • The critical current density of all of MgB{sub 2} samples immersed at different standby time in engine oil in whole field range has been better than that of the pure MgB{sub 2} sample. • The MgB{sub 2} sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. - Abstract: The present study focuses on the effects of standby time of the MgB{sub 2} samples immersed in synthetic engine oil on the critical current density ( J{sub c}(H)), magnetic field dependence of the pinning force density f{sub p}(b) and T{sub c} performances of MgB{sub 2} bulk superconductors. Synthetic engine oil was used as a product which is cheap and a rich carbon source. Manufactured MgB{sub 2} pellet samples were immersed at different standby time of 30 min, 120 min, 300 min and 1440 min in synthetic engine oil after the first heating process. Finally, MgB{sub 2} samples immersed in synthetic engine oil were sintered at 1000 °C and kept for 15 min in Ar atmosphere. The critical current density of all of MgB{sub 2} samples immersed at different standby time in engine oil in whole field range was better than that of the pure MgB{sub 2} sample because of the number of the pinning centers. The MgB{sub 2} sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. The J{sub c} value for the pure sample is 2.0 × 10{sup 3} A/cm{sup 2}, whereas for the MgB{sub 2} sample immersed at 300 min standby time in engine oil the J{sub c} is enhanced to 4.8 × 10{sup 3} A/cm{sup 2} at 5 K and 3 T. The superconducting transition temperature (T{sub c}) did not change

  12. Modification of Optical Properties of Seawater Exposed to Oil Contaminants Based on Excitation-Emission Spectra

    Science.gov (United States)

    Baszanowska, E.; Otremba, Z.

    2015-10-01

    The optical behaviour of seawater exposed to a residual amount of oil pollution is presented and a comparison of the fluorescence spectra of oil dissolved in both n-hexane and seawater is discussed based on excitation-emission spectra. Crude oil extracted from the southern part of the Baltic Sea was used to characterise petroleum properties after contact with seawater. The wavelength-independent fluorescence maximum for natural seawater and seawater artificially polluted with oil were determined. Moreover, the specific excitation-emission peaks for natural seawater and polluted water were analysed to identify the natural organic matter composition. It was found that fluorescence spectra identification is a promising method to detect even an extremely low concentration of petroleum residues directly in the seawater. In addition, alien substances disturbing the fluorescence signatures of natural organic substances in a marine environment is also discussed.

  13. Physicochemical/photophysical characterization and angiogenic properties of Curcuma longa essential oil.

    Science.gov (United States)

    Araújo, Lilhian A; Araújo, Rafael G M; Gomes, Flávia O; Lemes, Susy R; Almeida, Luciane M; Maia, Lauro J Q; Gonçalves, Pablo J; Mrué, Fátima; Silva-Junior, Nelson J; Melo-Reis, Paulo R DE

    2016-01-01

    This study analyzed the physicochemical and photophysical properties of essential oil of Curcuma longa and its angiogenic potential. The results showed that curcumin is the main fluorescent component present in the oil, although the amount is relatively small. The experimental chorioallantoic membrane model was used to evaluate angiogenic activity, showing a significant increase in the vascular network of Curcuma longa and positive control groups when compared to the neutral and inhibitor controls (P Curcuma longa essential oil and the positive control (P >0.05). Histological analysis showed extensive neovascularization, hyperemia and inflammation in the positive control group and Curcuma longa when compared to other controls (P Curcuma longa oil showed considerable proangiogenic activity and could be a potential compound in medical applications.

  14. Improving magnetic properties of MgB_2 bulk superconductors by synthetic engine oil treatment

    International Nuclear Information System (INIS)

    Taylan Koparan, E.; Savaskan, B.; Yanmaz, E.

    2016-01-01

    Highlights: • The effects of synthetic engine oil treatment on magnetic properties of bulk MgB_2 superconductors has been first time investigated and reported. • Synthetic engine oil used as a product which is cheap and a rich carbon source obviously has improved the superconducting magnetic properties of MgB_2. • The critical current density of all of MgB_2 samples immersed at different standby time in engine oil in whole field range has been better than that of the pure MgB_2 sample. • The MgB_2 sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. - Abstract: The present study focuses on the effects of standby time of the MgB_2 samples immersed in synthetic engine oil on the critical current density ( J_c(H)), magnetic field dependence of the pinning force density f_p(b) and T_c performances of MgB_2 bulk superconductors. Synthetic engine oil was used as a product which is cheap and a rich carbon source. Manufactured MgB_2 pellet samples were immersed at different standby time of 30 min, 120 min, 300 min and 1440 min in synthetic engine oil after the first heating process. Finally, MgB_2 samples immersed in synthetic engine oil were sintered at 1000 °C and kept for 15 min in Ar atmosphere. The critical current density of all of MgB_2 samples immersed at different standby time in engine oil in whole field range was better than that of the pure MgB_2 sample because of the number of the pinning centers. The MgB_2 sample immersed at 300 min standby time in synthetic engine oil has the best performance compared to other samples. The J_c value for the pure sample is 2.0 × 10"3 A/cm"2, whereas for the MgB_2 sample immersed at 300 min standby time in engine oil the J_c is enhanced to 4.8 × 10"3 A/cm"2 at 5 K and 3 T. The superconducting transition temperature (T_c) did not change with the increasing standby time of the samples in synthetic engine oil at all. The best diamagnetic property was

  15. Microbial dynamics in petroleum oilfields and their relationship with physiological properties of petroleum oil reservoirs.

    Science.gov (United States)

    Varjani, Sunita J; Gnansounou, Edgard

    2017-12-01

    Petroleum is produced by thermal decay of buried organic material over millions of years. Petroleum oilfield ecosystems represent resource of reduced carbon which favours microbial growth. Therefore, it is obvious that many microorganisms have adapted to harsh environmental conditions of these ecosystems specifically temperature, oxygen availability and pressure. Knowledge of microorganisms present in ecosystems of petroleum oil reservoirs; their physiological and biological properties help in successful exploration of petroleum. Understanding microbiology of petroleum oilfield(s) can be used to enhance oil recovery, as microorganisms in oil reservoirs produce various metabolites viz. gases, acids, solvents, biopolymers and biosurfactants. The aim of this review is to discuss characteristics of petroleum oil reservoirs. This review also provides an updated literature on microbial ecology of these extreme ecosystems including microbial origin as well as various types of microorganisms such as methanogens; iron, nitrate and sulphate reducing bacteria, and fermentative microbes present in petroleum oilfield ecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Some properties of castor oil affecting its performance as a capacitor impregnant and their significance to future impregnant research

    International Nuclear Information System (INIS)

    Boicourt, G.P.

    1975-01-01

    For a considerable time castor oil and polychlorinated biphenyl (PCB) have been the principal impregnants used in energy-storage capacitors. Castor oil has proven to be better than PCB for pulsed applications. PCB's have come under attack as an environmental hazard, while castor oil is a vegetable product and its supply and quality are subject to fluctuation. These two facts make the development of new impregnants desirable. The properties of PCB as a capacitor impregnant are well known. This paper first compares a number of properties of castor oil and PCB's. A comparison is made between the lives of castor oil capacitors and comparable PCB energy-storage capacitors. Some of the physical and chemical properties of castor oil which make it a good pulse capacitor impregnant are examined. These properties can be used as a guide for future research on new pulse capacitor impregnants

  17. Effects of Fuel Oil on the Geotechnical Properties of Clay Soil

    Directory of Open Access Journals (Sweden)

    Mahdi Obaid Karkush

    2017-08-01

    Full Text Available The present study highlights the effects of medium fuel oil (MFO on the chemical, physical and mechanical properties of clay soil samples (disturbed and undisturbed obtained from the site of the electrical power plant in the campus of the University of Baghdad at Al-Jadriah district in Baghdad/Iraq. The soil sample was classified according to the unified soil classification system (USCS as CL and described as lean clay of low plasticity. The medium fuel oil is an industrial wastewater disposed as a byproduct from the fuel used in the electricity power plant. The soil samples are artificially contaminated with two percentages of medium fuel oil, 10 and 20 % related to the dry weight of soil. The soil samples were mixed with the contaminant (MFO by hand and then left for 4 days for homogeneity. A series of laboratory tests are conducted on both natural and artificially contaminated soil samples to measure the effects of medium fuel oil on the chemical, physical and mechanical properties of soil samples. The results of tests showed that the medium fuel oil has significant impacts on some properties of soil and slight effects on the others. Increasing the percentage of contaminant causes a slight decrease in the liquid limit and particle size distribution; on the other hand, it causes a considerable increase in the consolidation parameters and decrease in shear strength parameters. Also, there is a slight change in the chemical composition of soil samples.

  18. Research on visible and near infrared spectral-polarimetric properties of soil polluted by crude oil

    Science.gov (United States)

    Shen, Hui-yan; Zhou, Pu-cheng; Pan, Bang-long

    2017-10-01

    Hydrocarbon contaminated soil can impose detrimental effects on forest health and quality of agricultural products. To manage such consequences, oil leak indicators should be detected quickly by monitoring systems. Remote sensing is one of the most suitable techniques for monitoring systems, especially for areas which are uninhabitable and difficulty to access. The most available physical quantities in optical remote sensing domain are the intensity and spectral information obtained by visible or infrared sensors. However, besides the intensity and wavelength, polarization is another primary physical quantity associated with an optical field. During the course of reflecting light-wave, the surface of soil polluted by crude oil will cause polarimetric properties which are related to the nature of itself. Thus, detection of the spectralpolarimetric properties for soil polluted by crude oil has become a new remote sensing monitoring method. In this paper, the multi-angle spectral-polarimetric instrument was used to obtain multi-angle visible and near infrared spectralpolarimetric characteristic data of soil polluted by crude oil. And then, the change rule between polarimetric properties with different affecting factors, such as viewing zenith angle, incidence zenith angle of the light source, relative azimuth angle, waveband of the detector as well as different grain size of soil were discussed, so as to provide a scientific basis for the research on polarization remote sensing for soil polluted by crude oil.

  19. Transesterification of Vegetable Oils with Ethanol and Characterization of the Key Fuel Properties of Ethyl Esters

    Directory of Open Access Journals (Sweden)

    Stamoulis Stournas

    2009-06-01

    Full Text Available The transesterification reactions of four different vegetable oils (sunflower, rapeseed, olive oil and used frying oil with ethanol, using sodium hydroxide as catalyst, were studied. The ester preparation involved a two-step transesterification reaction, followed by purification. The effects of the mass ratio of catalyst to oil (0.25 – 1.5%, the molar ratio of ethanol to oil (6:1 – 12:1, and the reaction temperature (35 – 90 °C were studied for the conversion of sunflower oil to optimize the reaction conditions in both stages. The rest of the vegetable oils were converted to ethyl esters under optimum reaction parameters. The optimal conditions for first stage transesterification were an ethanol/oil molar ratio of 12:1, NaOH amount (1% wt/wt, and 80 °C temperature, whereas the maximum yield of ethyl esters reached 81.4% wt/wt. In the second stage, the yield of ethyl esters was improved by 16% in relation with the one-stage transesterification, which was obtained under the following optimal conditions: catalyst concentration 0.75% and ethanol/oil molar ratio 6:1. The fuel properties of the esters were measured according to EN test methods. Based on the experimental results one can see that the ethyl esters do not differ significantly from methyl esters. Moreover, the results showed that the values of density, viscosity, and higher heating value of ethyl esters were similar to those of automotive and heavy duty engine diesel fuel. However, the CFPP values were higher, which may contribute to potential difficulties in cold starts. On the other hand, the flash points, which were higher than those of diesel fuel constituted a safety guarantee from the point of view of handling and storage.

  20. Influence of the Pyrolysis Temperature on Sewage Sludge Product Distribution, Bio-Oil, and Char Properties

    DEFF Research Database (Denmark)

    Trinh, Ngoc Trung; Jensen, Peter Arendt; Dam-Johansen, Kim

    2013-01-01

    Fast pyrolysis may be used for sewage sludge treatment with the advantages of a significant reduction of solid waste volume and production of a bio-oil that can be used as fuel. A study of the influence of the reaction temperature on sewage sludge pyrolysis has been carried out using a pyrolysis...... of 392 g/mol, and metal concentrations lower than 0.14 wt % on a dry basis (db). Less optimal oil properties with respect to industrial applications were observed for oil samples obtained at 475 and 625 °C. Char properties of the 575 °C sample were an ash content of 81 wt % and a HHV of 6.1 MJ/kg db...

  1. A comparison of cold flow properties of biodiesel produced from virgin and used frying oil

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shanableh, Filiz [Food Engineering Department, Near East University (Cyprus); Evcil, Ali; Govsa, Cemal [Mechanical Engineering Department, Near East University (Cyprus); Savasdylmac, Mahmut A. [Mechanical Engineering Department, Booazici University (Turkey)

    2011-07-01

    Bio-diesel can be produced from different kinds of feedstock. The purpose of this paper is to research and make the comparison of the cold flow properties of bio-diesel produced from refined-virgin frying vegetable oil (RVFVO) and waste frying vegetable oil (WFVO). As is known, bio-diesel fuel will have higher cloud points (CP), cold filter plugging points (CFPP) and pour points (PP) if it is derived from fat or oil which consists of significant amounts of saturated fatty compounds. Both RVFVO and WFVO were derived from the same cafeteria on a Near East University campus and converted to biodiesel fuel through base catalyzed transesterification reaction. As the current results show, there is no considerable difference in cold flow properties of the bio-diesel produced from RVFVO and WFVO. So WFVO seems be better positioned to serve as raw material in biodiesel production because of its lower cost and its environmental benefits.

  2. An Investigation into the Physico-chemical Properties of Transformer Oil Blends with Antioxidants extracted from Turmeric Powder

    Science.gov (United States)

    Dukhi, Veresha; Bissessur, Ajay; Ngila, Catherine Jane; Ijumba, Nelson Mutatina

    2013-07-01

    The blending of transformer oil (used mainly as an insulating oil) with appropriate synthetic antioxidants, such as BHT (2,6-di-tert-butyl-4-methylphenol) and DBP (2,6-di-tert-butylphenol) have been previously reported. This article is focused on the use of antioxidant extracts from turmeric (Curcuma longa), a natural source. Turmeric is well known for its antimicrobial, antioxidant and anticarcinogenic properties owing to the active nature of its components. Extracts from powdered turmeric were subsequently blended into naphthenic-based uninhibited virgin transformer oil, hereinafter referred to as extract-oil blends (E-OB). Thin-layer chromatography (TLC) of the oil blends revealed that five components extracted from turmeric powder were successfully blended into the oil. Subsequent gas chromatography-mass spectrometry (GC-MS) analysis confirmed the presence of the compounds: curcumene, sesquiphellandrene, ar-turmerone, turmerone and curlone. Thermogravimetric analysis (TGA) of the extract-oil blends, containing various levels of extracts, revealed an average temperature shift of ˜8.21°C in the initial onset of degradation in comparison to virgin non-blended oil. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay showed that an increase in the mass aliquot of turmeric extracts in the transformer oil increased the free radical scavenging activity of the oil. Electrical properties of the oil investigated showed that the dissipation factor in the blended oil was found to be lower than that of virgin transformer oil. Evidently, a lower dissipation value renders the oil blend as a superior insulator over normal virgin non-blended oil. This investigation elucidated improved physico-chemical properties of transformer oil blended with turmeric antioxidant extracts.

  3. Mechanical properties of short random oil palm fibre reinforced epoxy composites

    International Nuclear Information System (INIS)

    Mohd Zuhri Mohamed Yusoff; Mohd Sapuan Salit; Napsiah Ismail; Riza Wirawan

    2010-01-01

    This paper presents the study of mechanical properties of short random oil palm fibre reinforced epoxy (OPF/epoxy) composites. Empty fruit bunch (EFB) was selected as the fibre and epoxy as the matrix. Composite plate with four different volume fractions of oil palm fibre was fabricated, (5 vol %, 10 vol %, 15 vol % and 20 vol %). The fabrication was made by hand-lay up techniques. The tensile and flexural properties showed a decreasing trend as the fibre loading was increased. The highest tensile properties was obtained for the composite with fibre loading of 5 vol % and there were no significant effect for addition of more than 5 vol % to the flexural properties. Interaction between fibre and matrix was observed from the scanning electron microscope (SEM) micrograph. (author)

  4. Transport and Phase Equilibria Properties for Steam Flooding of Heavy Oils

    Energy Technology Data Exchange (ETDEWEB)

    Gabitto, Jorge; Barrufet, Maria

    2002-11-20

    The objectives of this research included experimental determination and rigorous modeling and computation of phase equilibrium diagrams, volumetric, and transport properties of hydrocarbon/CO2/water mixtures at pressures and temperatures typical of steam injection processes for thermal recovery of heavy oils.

  5. chemical as well as biological properties of the oil of Alpinia galanga

    African Journals Online (AJOL)

    bt

    2016-11-30

    Nov 30, 2016 ... Physico-chemical properties, antioxidant activities as well as antimicrobial activities of the oils were .... ones (like aldehydes: 7.29%, alcohols: 32.43%, ketones: ... capable of being dissolved in both polar organic and nonpolar ...

  6. Composition and physical properties of arugula, shepherd's purse, and upland cress oils

    Science.gov (United States)

    The fatty acid, tocopherol and phytosterol profiles of arugula [AO; Eruca vesicaria (L.) Cav. subsp. sativa (Mill.) Thell.], upland cress [UCO; Barbarea verna (Mill.) Asch.], and shepherd's purse [SPO; Capsella bursa-pastoris (L.) Medik.] oils are reported, along with their physical properties. The...

  7. Synthesis and properties of highly branched Jatropha curcas L. oil derivatives

    NARCIS (Netherlands)

    Daniel, Louis; Ardiyanti, Agnes R.; Schuur, Boelo; Manurung, Robert; Broekhuis, Antonius A.; Heeres, Hero J.

    The synthesis and properties of a number of novel branched Jatropha curcas L. oil (JO) derivatives containing vicinal di-ester units in the fatty acid chains are reported. Both the length (acetyl vs. hexanoyl) and the stereochemistry of the vicinal di-ester units (cis vs. trans) were varied. The

  8. The effect of torrefaction on oil palm empty fruit bunch properties ...

    African Journals Online (AJOL)

    The effect of torrefaction on oil palm empty fruit bunch properties using microwave irradiation. M.I. Ahmad, Z.I. Rizman, M.S.M. Rasat, Z.A.Z. Alauddin, S.N.M. Soid, M.S.A. Aziz, M. Mohamed, M.H.M. Amini, M.F.M. Amin ...

  9. Development and material properties of new hybrid plywood from oil palm biomass

    International Nuclear Information System (INIS)

    Abdul Khalil, H.P.S.; Nurul Fazita, M.R.; Bhat, A.H.; Jawaid, M.; Nik Fuad, N.A.

    2010-01-01

    Shortage of wood as a raw material has forced wood-based industries to find alternative local raw materials. Currently, oil palm biomass is undergoing research and development (R and D) and appears to be the most viable alternative. This work examines the conversion of oil palm trunk (OPT) and oil palm empty fruit bunches (OPEFB) into new plywood and analyses its properties. We prepared five-ply veneer hybrid plywood (alternating layers of oil palm trunk veneer and empty fruit bunch mat) with different spread levels (300 g/m 2 and 500 g/m 2 ) of resins (phenol formaldehyde and urea formaldehyde). We then studied the mechanical and physical properties of the plywood. The results show that hybridisation of EFB with OPT improves some properties of plywood, such as bending strength, screw withdrawal and shear strength. The thermal properties of the plywood panels were studied by thermogravimetric analysis (TGA). The panels glued with phenol formaldehyde with a spread level of 500 g/m 2 showed better thermal stability than the other panels. Scanning electron microscope (SEM) was used to study the fibre matrix bonding and surface morphology of the plywood at different glue spread levels of the resins. The fibre-matrix bonding showed good improvement for the hybrid panel glued with 500 g/m 2 phenol formaldehyde.

  10. Absorption properties of water-in-oil emulsions in the low THz frequency range

    DEFF Research Database (Denmark)

    Møller, Uffe; Folkenberg, Jacob Riis; Jepsen, Peter Uhd

    We use transmission THz spectroscopy to investigate the absorption properties of water-in-oil emulsions with water content varying in the 0-20% range, relevant for a range of food products. We find that at low frequencies the effective absorption coefficient of the emulsion is suppressed compared...... to bulk water....

  11. Nutraceutical Properties of Olive Oil Polyphenols. An Itinerary from Cultured Cells through Animal Models to Humans

    Directory of Open Access Journals (Sweden)

    Stefania Rigacci

    2016-05-01

    Full Text Available The increasing interest in the Mediterranean diet hinges on its healthy and anti-ageing properties. The composition of fatty acids, vitamins and polyphenols in olive oil, a key component of this diet, is considered a key feature of its healthy properties. Therefore, it is of significance that the Rod of Asclepius lying on a world map surrounded by olive tree branches has been chosen by the World Health Organization as a symbol of both peace and well-being. This review travels through most of the current and past research, recapitulating the biochemical and physiological correlations of the beneficial properties of olive tree (Olea europaea polyphenols and their derivatives found in olive oil. The factors influencing the content and beneficial properties of olive oil polyphenols will also be taken into account together with their bioavailability. Finally, the data on the clinical and epidemiological relevance of olive oil and its polyphenols for longevity and against age- and lifestyle-associated pathologies such as cancer, cardiovascular, metabolic and neurodegenerative diseases are reviewed.

  12. Film-forming properties of castor oil polyol ester blends in elastohydrodynamic conditions

    Science.gov (United States)

    The viscosities and elastohydrodynamic (EHD) film thickness properties of binary blends of castor oil with polyol esters were determined experimentally. Predicted blend viscosity was calculated from the viscosity of the pure blend components. Measured viscosity values were closer to the values pre...

  13. Effect of Hydrothermal Treatment on the Physicochemical, Rheological, and Oil-Resistant Properties of Rice Flour

    Science.gov (United States)

    Rice flour was thermo-mechanically modified by steam jet-cooking and the physico-chemical and rheological properties of the resulting product were characterized. Then, its performance in frying batters was evaluated as an oil barrier. Compared to native rice flour, the steam jet-cooked rice flour ...

  14. 30 CFR 210.155 - What reports must I submit for Federal onshore stripper oil properties?

    Science.gov (United States)

    2010-07-01

    ... Minerals Management Service, P.O. Box 25165, MS 392B2, Denver, Colorado 80217-0165; or (ii) Special courier... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What reports must I submit for Federal onshore stripper oil properties? 210.155 Section 210.155 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT...

  15. Influence of palm oil and glycerol on properties of fish skin gelatin-based films.

    Science.gov (United States)

    Nilsuwan, Krisana; Benjakul, Soottawat; Prodpran, Thummanoon

    2016-06-01

    Properties of fish skin gelatin film incorporated with palm oil at 50 and 75 % (w/w) as affected by glycerol at 0-30 % (w/w) were investigated. Increases in water vapour permeability and elongation at break along with decrease in tensile strength were noticed when levels of glycerol were increased (p fish skin gelatin films without drastic alteration of mechanical properties.

  16. Influence of fat and oil type on the yield, physico-chemical properties, and microstructure of fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Del Mundo, Dann Marie N; Sutheerawattananonda, Manote

    2017-11-01

    Fat, oil, and grease (FOG) deposit, in the form of calcium soap, was found to cause sanitary sewer overflows due to its adhesion on pipe walls. To address this problem, laboratory-prepared calcium soaps have been used to investigate the formation mechanisms of FOG deposits. However, the fats and oils previously utilized were limited and some soap characteristics were not examined. This research attempted to probe through the properties of calcium soaps prepared from calcium chloride and the fats and oils of chicken, pork, palm olein, soybean, olive, and coconut to further understand FOG formation and stability. Results revealed that FOG deposits may occur as smooth, paste-like material or coarse, semi-solid substance depending on their exposure to excess fat/oil and calcium. The smooth soaps with more excess fat/oil demonstrated high apparent viscosity and consistency index, while the coarse soaps with large levels of calcium signified higher melting endset. Moreover, a soap microstructure showing evident networks and lesser void area displayed higher heat and rheological stability, respectively. Overall, fats and oils with higher oleic to palmitic acid ratio such as palm olein oil, olive oil, chicken fat, and pork fat produced soaps with greater yield and degree of saponification. Hence, establishments and authorities should be alert in managing and monitoring these wastes. On the other hand, soybean oil high in linoleic acid and coconut oil high in lauric acid do not pose an immediate threat to the sewer system since they only produced soaps in small quantity. However, their soaps showed high melting endset which could pose a serious effect when accumulated at large amount. On the whole, the fatty acid profile of fats and oils, the presence of excess fat/oil, and calcium content mainly dictate the appearance, melting, rheology, and microstructure of calcium soaps. Their distinct properties can be used as criteria in predicting the condition and stability of FOG

  17. Physical and Chemical Properties of Bio-Oils From Microwave Pyrolysis of Corn Stover

    Science.gov (United States)

    Yu, Fei; Deng, Shaobo; Chen, Paul; Liu, Yuhuan; Wan, Yiqin; Olson, Andrew; Kittelson, David; Ruan, Roger

    This study was aimed to understand the physical and chemical properties of pyrolytic bio-oils produced from microwave pyrolysis of corn stover regarding their potential use as gas turbine and home heating fuels. The ash content, solids content, pH, heating value, minerals, elemental ratio, moisture content, and viscosity of the bio-oils were determined. The water content was approx 15.2 wt%, solids content 0.22 wt%, alkali metal content 12 parts per million, dynamic viscosity 185 mPa·s at 40°C, and gross high heating value 17.5 MJ/kg for a typical bio-oil produced. Our aging tests showed that the viscosity and water content increased and phase separation occurred during the storage at different temperatures. Adding methanol and/or ethanol to the bio-oils reduced the viscosity and slowed down the increase in viscosity and water content during the storage. Blending of methanol or ethanol with the bio-oils may be a simple and cost-effective approach to making the pyrolytic bio-oils into a stable gas turbine or home heating fuels.

  18. The influence of extraction methods on composition and antioxidant properties of rice bran oil

    Directory of Open Access Journals (Sweden)

    Noppawat Pengkumsri

    2015-09-01

    Full Text Available AbstractThe current study was employed to assess the influence of the different extraction methods on total tocols, γ-oryzanol content, and antioxidant properties of Chiang Mai Black rice, Mali Red rice, and Suphanburi-1 Brown rice bran oil. Rice bran oil (RBO was extracted by Hexane, Hot pressed, Cold pressed, and Supercritical Fluid Extraction (SFe methods. High yield of RBO was extracted by hexane and SFe methods. Total and subgroups of tocols, and γ-oryzanol content were determined by HPLC. The hexane extracted sample accounts for high content of γ-oryzanol and tocols. Besides, all of RBO extracts contain a significantly high amount of γ-tocotrienol. In vitro antioxidant assay results indicated that superior quality of oil was recovered by hexane extraction. The temperature in the extraction process also affects the value of the oil. Superior quality of oil was recovered by hexane extraction, in terms of phytochemical contents and antioxidant properties compared to other tested extraction methods. Further, thorough study of factors compromising the quality and quantity of RBO recovery is required for the development of enhanced functional foods and other related products.

  19. Recycled palm oil is better than soy oil in maintaining bone properties in a menopausal syndrome model of ovariectomized rat.

    Science.gov (United States)

    Shuid, Ahmad Nazrun; Chuan, Loh Hong; Mohamed, Norazlina; Jaarin, Kamsiah; Fong, Yew Su; Soelaiman, Ima Nirwana

    2007-01-01

    Palm oil is shown to have antioxidant, anticancer and cholesterol lowering effects. It is resistant to oxidation when heated compared to other frying oils such as soy oil. When a frying oil is heated repeatedly, it forms toxic degradation products, such as aldehydes which when consumed, may be absorbed into the systemic circulation. We have studied the effects of taking soy or palm oil that were mixed with rat chow on the bone histomorphometric parameters of ovariectomised rats. Female Sprague-Dawley rats were divided into eight groups: (1) normal control group; (2) ovariectomised-control group; (3) ovariectomised and fresh soy oil; (4) ovariectomised and soy oil heated once; (5) ovariectomised and soy oil heated five times; (6) ovariectomised and fresh palm oil; (7) ovariectomised and palm oil heated once; (8) ovariectomised and palm oil heated five times. These oils were mixed with rat chow at weight ratio of 15:100 and were given to the rats daily for six months. Ovariectomy had caused negative effects on the bone histomorphometric parameters. Ingestion of both fresh and once-heated oils, were able to offer protections against the negative effects of ovariectomy, but these protections were lost when the oils were heated five times. Soy oil that was heated five times actually worsens the histomorphometric parameters of ovariectomised rats. Therefore, it may be better for postmenopausal who are at risk of osteoporosis to use palm oil as frying oil especially if they practice recycling of frying oils.

  20. Effect of safflower oil on the protective properties of the in situ formed salivary pellicle.

    Science.gov (United States)

    Hannig, C; Wagenschwanz, C; Pötschke, S; Kümmerer, K; Kensche, A; Hoth-Hannig, W; Hannig, M

    2012-01-01

    The prevalence of dental erosion is still increasing. A possible preventive approach might be rinsing with edible oils to improve the protective properties of the pellicle layer. This was tested in the present in situ study using safflower oil. Pellicle formation was carried out in situ on bovine enamel slabs fixed buccally to individual upper jaw splints (6 subjects). After 1 min of pellicle formation subjects rinsed with safflower oil for 10 min, subsequently the samples were exposed in the oral cavity for another 19 min. Enamel slabs without oral exposure and slabs exposed to the oral cavity for 30 min without any rinse served as controls. After pellicle formation in situ, slabs were incubated in HCl (pH 2; 2.3; 3) for 120 s, and kinetics of calcium and phosphate release were measured photometrically (arsenazo III, malachite green). Furthermore, the ultrastructure of the pellicles was evaluated by transmission electron microscopy (TEM). Pellicle alone reduced erosive calcium and phosphate release significantly at all pH values. Pellicle modification by safflower oil resulted in an enhanced calcium loss at all pH values and caused an enhanced phosphate loss at pH 2.3. TEM indicated scattered accumulation of lipid micelles and irregular vesicle-like structures attached to the oil-treated pellicle layer. Acid etching affected the ultrastructure of the pellicle irrespective of oil rinsing. The protective properties of the pellicle layer against extensive erosive attacks are limited and mainly determined by pH. The protective effects are modified and reduced by rinses with safflower oil. Copyright © 2012 S. Karger AG, Basel.

  1. Antioxidative properties of the essential oil from Pinus mugo.

    Science.gov (United States)

    Grassmann, Johanna; Hippeli, Susanne; Vollmann, Renate; Elstner, Erich F

    2003-12-17

    The essential oil from Pinus mugo (PMEO) was tested on its antioxidative capacity. For this purpose, several biochemical test systems were chosen (e.g., the Fenton System, the xanthine oxidase assay, or the copper-induced oxidation of low-density lipoprotein (LDL)). The results show that there is moderate or weak antioxidative activity when tested in aqueous environments, like in the Fenton system, xanthine oxidase induced superoxide radical formation, or in the HOCl driven fragmentation of 1-aminocyclopropane-1-carboxylic acid (ACC). In contrast, when tested in more lipophilic environments (e.g., the ACC-cleavage by activated neutrophils in whole blood) the PMEO exhibits good antioxidative activity. PMEO does also show good antioxidative capacity in another lipophilic test system (i.e., the copper induced oxidation of LDL). Some components of PMEO (i.e., Delta(3)-carene, camphene, alpha-pinene, (+)-limonene and terpinolene) were also tested. As the PMEO, they showed weak or no antioxidant activity in aqueous environments, but some of them were effective antioxidants regarding ACC-cleavage by activated neutrophils in whole blood or copper-induced LDL-oxidation. Terpinolene, a minor component of PMEO, exhibited remarkable protection against LDL-oxidation.

  2. Chemical composition and antigenotoxic properties of Lippia alba essential oils

    Directory of Open Access Journals (Sweden)

    Molkary Andrea López

    2011-01-01

    Full Text Available The present work evaluated the chemical composition and the DNA protective effect of the essential oils (EOs from Lippia alba against bleomycin-induced genotoxicity. EO constituents were determined by Gas Chromatography/Mass Spectrometric (GC-MS analysis. The major compounds encountered being citral (33% geranial and 25% neral, geraniol (7% and trans-β-caryophyllene (7% for L. alba specimen COL512077, and carvone (38%, limonene (33% and bicyclosesquiphellandrene (8% for the other, COL512078. The genotoxicity and antigenotoxicity of EO and the compounds citral, carvone and limonene, were assayed using the SOS Chromotest in Escherichia coli. The EOs were not genotoxic in the SOS chromotest, but one of the major compound (limonene showed genotoxicity at doses between 97 and 1549 mM. Both EOs protected bacterial cells against bleomycin-induced genotoxicity. Antigenotoxicity in the two L. alba chemotypes was related to the major compounds, citral and carvone, respectively. The results were discussed in relation to the chemopreventive potential of L. alba EOs and its major compounds.

  3. Property modification of jatropha oil biodiesel by blending with other biodiesels or adding antioxidants

    International Nuclear Information System (INIS)

    Chen, Yi-Hung; Chen, Jhih-Hong; Luo, Yu-Min; Shang, Neng-Chou; Chang, Cheng-Hsin; Chang, Ching-Yuan; Chiang, Pen-Chi; Shie, Je-Lueng

    2011-01-01

    The feasibility of biodiesel production from jatropha (Jatropha curcas) oil was investigated with respect to the biodiesel blending properties and its oxidation stability with antioxidants. The JME (jatropha oil methyl esters) had the cetane number of 54, cold filter plugging point of -2 o C, density of 881 kg/m 3 at 15 o C, ester content of 99.4 wt.%, iodine value of 96.55 g I 2 /100 g, kinematic viscosity of 4.33 mm 2 /s at 40 o C, and oxidation stability of 3.86 h. Furthermore, the JME was blended with palm oil biodiesel and soybean oil biodiesel at various weight ratios and evaluated for fuel properties as compared to the relevant specifications. In addition, several antioxidants at concentrations between 100 and 1000 ppm were studied for their potential to improve the oxidation stability of the JME. The relationship between the IP (induction period) in the measurement of the oxidation stability associated with the antioxidant consumption in the JME was described by first-order reaction rate kinetics. Moreover, the ln IP (natural logarithm of the IP) at various concentrations of pyrogallol showed a linear relationship with the test temperature. The oxidation stability at ambient temperatures was predicted on the basis of an extrapolation of the temperature-dependent relationship. -- Highlights: → Jatropha oil methyl esters had satisfactory biodiesel properties except for the oxidation stability. → The oxidation stability and cold filter plugging point of the jatropha-based biodiesel blends cannot meet the EN 14214 requirements simultaneously. → The addition of pyrogallol was recommended for the stabilization of the jatropha oil methyl esters with a concentration of 100-250 ppm.

  4. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    International Nuclear Information System (INIS)

    Azevedo, Elaine C.; Nascimento, Eduardo M.; Chierice, Gilberto O.; Claro Neto, Salvador

    2013-01-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  5. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Elaine C.; Nascimento, Eduardo M., E-mail: helunica@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Chierice, Gilberto O.; Claro Neto, Salvador [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Instituto de Quimica; Lepienski, Carlos M. [Universidade Federal do Parana (UFPR), Curitiba (Brazil)

    2013-07-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  6. Tensile Mechanical Property of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites

    Science.gov (United States)

    Ghazilan, A. L. Ahmad; Mokhtar, H.; Shaik Dawood, M. S. I.; Aminanda, Y.; Ali, J. S. Mohamed

    2017-03-01

    Natural, short, untreated and randomly oriented oil palm empty fruit bunch fiber reinforced epoxy composites were manufactured using vacuum bagging technique with 20% fiber volume composition. The performance of the composite was evaluated as an alternative to synthetic or conventional reinforced composites. Tensile properties such as tensile strength, modulus of elasticity and Poisson’s ratio were compared to the tensile properties of pure epoxy obtained via tensile tests as per ASTM D 638 specifications using Universal Testing Machine INSTRON 5582. The tensile properties of oil palm empty fruit bunch fiber reinforced epoxy composites were lower compared to plain epoxy structure with the decrement in performances of 38% for modulus of elasticity and 61% for tensile strength.

  7. Properties and quality verification of biodiesel produced from tobacco seed oil

    Energy Technology Data Exchange (ETDEWEB)

    Usta, N., E-mail: n_usta@pau.edu.t [Pamukkale University, Mechanical Engineering Department, 20070 Denizli (Turkey); Aydogan, B. [Pamukkale University, Mechanical Engineering Department, 20070 Denizli (Turkey); Con, A.H. [Pamukkale University, Food Engineering Department, 20070 Denizli (Turkey); Uguzdogan, E. [Pamukkale University, Chemical Engineering Department, 20070 Denizli (Turkey); Ozkal, S.G. [Pamukkale University, Food Engineering Department, 20070 Denizli (Turkey)

    2011-05-15

    Research highlights: {yields} High quality biodiesel fuel can be produced from tobacco seed oil. {yields} Pyrogallol was found to be effective antioxidant improving the oxidation stability. {yields} The iodine number was reduced with a biodiesel including more saturated fatty acids. {yields} Octadecene-1-maleic anhydride copolymer was an effective cold flow improver. {yields} The appropriate amounts of the additives do not affect the properties negatively. -- Abstract: Tobacco seed oil has been evaluated as a feedstock for biodiesel production. In this study, all properties of the biodiesel that was produced from tobacco seed oil were examined and some solutions were derived to bring all properties of the biodiesel within European Biodiesel Standard EN14214 to verify biodiesel quality. Among the properties, only oxidation stability and iodine number of the biodiesel, which mainly depend on fatty acid composition of the oil, were not within the limits of the standard. Six different antioxidants that are tert-butylhydroquinone, butylated hydroxytoluene, propyl gallate, pyrogallol, {alpha}-tocopherol and butylated hydroxyanisole were used to improve the oxidation stability. Among them, pyrogallol was found to be the most effective antioxidant. The iodine number was improved with blending the biodiesel produced from tobacco seed oil with a biodiesel that contains more saturated fatty acids. However, the blending caused increasing the cold filter plugging point. Therefore, four different cold flow improvers, which are ethylene-vinyl acetate copolymer, octadecene-1-maleic anhydride copolymer and two commercial cold flow improvers, were used to decrease cold filter plugging point of the biodiesel and the blends. Among the improvers, the best improver is said to be octadecene-1-maleic anhydride copolymer. In addition, effects of temperature on the density and the viscosity of the biodiesel were investigated.

  8. Determination of hydrophilic–lipophilic balance value and emulsion properties of sacha inchi oil

    Directory of Open Access Journals (Sweden)

    Kiattiphumi Saengsorn

    2017-12-01

    Full Text Available Objective: To determine hydrophilic–lipophilic balance (HLB value, stability of formulate emulsion and properties of sacha inchi oil. Methods: The physiochemical characteristics of sacha inchi oil were first investigated. Free radical scavenging property was studied by DPPH assay. HLB value of sacha inchi oil was experimentally determined by preparing the emulsion using emulsifiers at different HLB value. Sacha inchi oil emulsion was prepared using the obtained HLB and its stability was conducted by centrifugation, temperature cycling, and accelerated stability test. The efficiency of the prepared emulsion was clinically investigated by 15 volunteers. The primary skin irritation was performed using closed patch test. Subjective sensory assessment was evaluated by using 5-point hedonic scale method. Results: Peroxide value of sacha inchi oil was 18.40 meq O2/kg oil and acid value was 1.86 KOH/g oil. The major fatty acids are omega-3 (44%, omega-6 (35% and omega-9 (9%. The vitamin E content was 226 mg/100 g oil. Moreover, sacha inchi oil (167 ppm and its emulsion showed 85% and 89% DPPH inhibition, respectively. The experimental HLB value of sacha inchi oil was 8.5. The sacha inchi oil emulsion exhibited good stability after stability test. The emulsion was classified as non-irritant after tested by primary skin irritation method. The skin hydration value significantly increased from 38.59 to 45.21 (P < 0.05 after applying sacha inchi oil emulsion for 1 month and the overall product satisfaction of volunteers after use was with score of 4.2. Conclusions: This work provides information on HLB value and emulsion properties of sacha inchi oil which is useful for cosmetic and pharmaceutical application. Keywords: Sacha inchi oil, Hydrophilic–lipophilic balance value, Emulsion stability, Efficacy test, Sensory test

  9. Influence of lubricant oil residual fraction on recycled high density polyethylene properties and plastic packaging reverse logistics proposal

    Directory of Open Access Journals (Sweden)

    Harley Moraes Martins

    2015-10-01

    Full Text Available Abstract To recycle post-consumer HDPE contaminated with waste lubricating oils, companies include prior washing and drying in the process. This consumes large amounts of water and energy, generates significant effluent requiring treatment. This study assesses lubricating oil influence on HDPE properties to evaluate the feasibility of its direct mechanical recycling without washing. The current lubricating oil packaging reverse logistics in Rio de Janeiro municipality is also analyzed. HDPE bottle samples were processed with seven oil contents ranging from 1.6-29.4 (wt%. The results indicated the possibility to reprocess the polymer with oily residue not exceeding 3.2%. At higher levels, the external oil lubricating action affects the plastic matrix processing in the extruder and injection, and the recycled material has a burnt oil odor and free oil on the surface. Small residual oil amounts retain the plastic properties comparable to the washed recycled polymer and exhibited benefits associated with the oil plasticizer action. However, oil presence above 7.7% significantly changes the properties and reduces the elasticity and flexural modulus and the plastic matrix crystallinity.

  10. Physician Appraisals: Key Challenges

    Directory of Open Access Journals (Sweden)

    Klich Jacek

    2017-06-01

    Full Text Available The main purpose of the article is to identify key criteria being used for physician appraisals and to find how communication skills of physicians are valued in those appraisals. ScienceDirect and EBSCOhost databases were used for this search. The results show that a physician appraisal is underestimated both theoretically and empirically. The particular gap exists with respect to the communication skills of physicians, which are rarely present in medical training syllabi and physician assessments. The article contributes to the theoretical discourse on physician appraisals and points out at the inconsistency between the high status of physicians as a key hospital resource on the one hand and, on the other hand, at inadequate and poorly researched assessment of their performance with a special emphasis on communication skills. The article may inspire health managers to develop and implement up-to-date assessment forms for physicians and good managerial practices in this respect in hospitals and other health care units.

  11. Physicochemical/photophysical characterization and angiogenic properties of Curcuma longa essential oil

    Directory of Open Access Journals (Sweden)

    LILHIAN A. ARAÚJO

    Full Text Available ABSTRACT This study analyzed the physicochemical and photophysical properties of essential oil of Curcuma longa and its angiogenic potential. The results showed that curcumin is the main fluorescent component present in the oil, although the amount is relatively small. The experimental chorioallantoic membrane model was used to evaluate angiogenic activity, showing a significant increase in the vascular network of Curcuma longa and positive control groups when compared to the neutral and inhibitor controls (P 0.05. Histological analysis showed extensive neovascularization, hyperemia and inflammation in the positive control group and Curcuma longa when compared to other controls (P <0.05, characteristic factors of the angiogenesis process. In conclusion, Curcuma longa oil showed considerable proangiogenic activity and could be a potential compound in medical applications.

  12. Evaluation of the toxic properties of naturally weathered Exxon Valdez crude oil to surrogate wildlife species

    International Nuclear Information System (INIS)

    Stubblefield, W.A.; Hancock, G.A.; Ford, W.H.; Prince, H.H.; Ringer, R.K.

    1995-01-01

    The toxic properties of naturally weathered Exxon Valdez crude oil (WEVC) to avian and mammalian wildlife species were evaluated using the surrogate species, mallard duck, Anas platyrhynchos, and European ferret, Mustela putorius. This study was conducted to evaluate the potential for toxic (rather than physical) injury to wildlife species that may have been exposed to WEVC, either through external contact or through dietary uptake. Previous studies have assessed the toxicity of unweathered crude oils, including Alaska North Slope Crude, but little information exists regarding the toxicity of a naturally weathered crude oil, typical of that encountered following a spill. A battery of laboratory toxicity tests was conducted, in compliance with standard and published test procedures, to evaluate acute and subchronic toxicity of WEVC. These included tests of food avoidance, reproductive effects, and direct eggshell application toxicity. Naturally weathered EVC, recovered postspill from Prince William Sound, was used as the test material. 36 refs., 7 figs., 4 tabs

  13. Soil science basis and the effect of oil contamination on chemical properties of soils

    International Nuclear Information System (INIS)

    Wagner, A.; Miehlich, G.

    1993-01-01

    The changes in soil chemistry properties due to oil contamination and decontamination are examined. One main point of the work is the determination of the effect of oil on the availability of nutrients in the soil. Nutrients are not only present dissolved in the soil solution, but are for the most part reversibly adsorbed by exchangers on loaded surfaces. The clay minerals, the organic substance and iron and manganese oxide act as exchangers. Knowledge on surface structure and reactions in soils contaminated by oil is to be obtained via examination of the exchange behaviour of different bio-elements. The results supply the basis for the cleaning up technique, the judgement of cleaned materials and their reusability. (orig.) [de

  14. The role of nanoparticles in the changing of physical and chemical properties of oil

    International Nuclear Information System (INIS)

    Xalilov, R.; Nasibova, A.; Lesin, V.; Xomutov, G.

    2015-01-01

    Researches in recent years have been shown that, magnetic nanoparticles of iron oxides are widespread in animate and inanimate nature. Researches carried out in the natural systems (plant, oil and etc.) by the electron paramagnetic resonance (EPR) method show that the bio generation of the nanoparticles has been highlighted. Comprehensive analysis of the influence of radioactive pollution to the plants has been conducted during the initial studies of natural systems for cliffing the mechanisms of the biogenic generation of magnetic nanoparticles, wide EPR signal characterizing the magnetic nanoparticles was observed. Magnetic nanoparticles can be included into the structure of fractal aggregates of colloid components of oil. Influence of the magnetic field to the main physical chemical properties of oil was happened as a result of bio mineralization process with the presence of generated magnetic nanoparticles.

  15. Estimation of oil reservoir thermal properties through temperature log data using inversion method

    International Nuclear Information System (INIS)

    Cheng, Wen-Long; Nian, Yong-Le; Li, Tong-Tong; Wang, Chang-Long

    2013-01-01

    Oil reservoir thermal properties not only play an important role in steam injection well heat transfer, but also are the basic parameters for evaluating the oil saturation in reservoir. In this study, for estimating reservoir thermal properties, a novel heat and mass transfer model of steam injection well was established at first, this model made full analysis on the wellbore-reservoir heat and mass transfer as well as the wellbore-formation, and the simulated results by the model were quite consistent with the log data. Then this study presented an effective inversion method for estimating the reservoir thermal properties through temperature log data. This method is based on the heat transfer model in steam injection wells, and can be used to predict the thermal properties as a stochastic approximation method. The inversion method was applied to estimate the reservoir thermal properties of two steam injection wells, it was found that the relative error of thermal conductivity for the two wells were 2.9% and 6.5%, and the relative error of volumetric specific heat capacity were 6.7% and 7.0%,which demonstrated the feasibility of the proposed method for estimating the reservoir thermal properties. - Highlights: • An effective inversion method for predicting the oil reservoir thermal properties was presented. • A novel model for steam injection well made full study on the wellbore-reservoir heat and mass transfer. • The wellbore temperature field and steam parameters can be simulated by the model efficiently. • Both reservoirs and formation thermal properties could be estimated simultaneously by the proposed method. • The estimated steam temperature was quite consistent with the field data

  16. Some Properties of Polymer Modified Self-Compacting Concrete Exposed to Kerosene and Gas Oil

    Directory of Open Access Journals (Sweden)

    Nada Mahdi Fawzi

    2017-01-01

    Full Text Available This thesis aims to study the effect of addition polymer materials on mechanical properties of self-compacting concrete, and also to assess the influence of petroleum products (kerosene and gas oil on mechanical properties of polymer modified self-compacting concrete (PMSCC after different exposure periods of (30 ,60 ,90 ,and 180 days. Two type of curing are used; 28 days in water for SCC and 2 days in water followed 26 days in air for PMSCC. The test results show that the PMSCC (15% P/C ratio which is exposed to oil products recorded a lower deterioration in compressive strength's values than reference concrete. The percentages of reduction in compressive strength values of PMSCC (15% P/C ratio was (6.03% and (9.61% up to 180 days of exposure to kerosene and gas oil respectively, relative to the same mix immersed in water, while the percentages of reduction in compressive strength values of SCC (reference concrete was (21.18% and (25.19% up to 180 days of exposure to kerosene and gas oil respectively, relative to the same mix immersed in water. Flexural strength results present improvement for all ages and for all concrete mixes with all percentages of polymer content The total water absorption values of PMSCC (15% P/C ratio showed a better performance than reference concrete mix when exposed to oil products. It was (1.34, 2.21, 2.17 % up to 180 days with samples immersed in water, kerosene, and gas oil respectively, with percentages of reduction of (23.86%, (33.83%, and (31.33% relative to the SCC (reference concrete.

  17. Effects of particle shape and size on nanofluid properties for potential Enhanced Oil Recovery (EOR

    Directory of Open Access Journals (Sweden)

    Tengku Mohd Tengku Amran

    2016-01-01

    Full Text Available Application of Enhanced Oil Recovery (EOR in oil and gas industry is very important to increase oil recovery and prolong the lifetime of a reservoir but it has been very costly and losing properties of EOR agent due to harsh condition. Nanoparticles have been used in EOR application since they are not degradable in reservoir condition and used in smaller amount compared to polymer usage. Commonly, EOR techniques are focusing on increasing the sweep efficiency by controlling the mobility ratio between reservoir fluid and injected fluid. Thus, this research aimed to analyze the nanofluid viscosity at different particle size and shape, volumetric concentration and types of dispersing fluid, as well as to determine the oil recovery performance at different nanofluid concentration. The nanofluid viscosity was investigated at nanoparticle sizes of 15nm and 60nm and shapes of 15nm spherical-solid and porous. Five nanofluid samples with concentration ranging from 0.1wt.% to 7wt.% were used to investigate the effect of volumetric concentration. Distilled water, ethanol, ethylene glycol (EG and brine were used for the effect of dispersing fluids. Oil recovery was investigated at five different concentrations of nanofluid samples through flooding test. It was found that viscosity of nanofluid increased with decreasing particle size and increasing volumetric concentration. Solid shape particle and increasing dispersing fluid viscosity resulted in higher nanofluid viscosity. The higher the nanofluid concentration, the higher the oil recovery obtained. It can be concluded that nanofluid properties have been significantly affected by the environment and the particle used for potential EOR application.

  18. Influence of CO{sup 2} on PVT properties of an oil crude at high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nilo Ricardo; Bonet, Euclides Jose [Centro de Estudos de Petroleo (CEPETRO/UNICAMP), SP (Brazil); Elias Junior, Antonio; Trevisan, Osvair Vidal [Universidade Estadual de Campinas (DEP/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Engenharia de Petroleo

    2012-07-01

    The current oil frontier in Brazil is in Santos and Campos Basins, where huge oil accumulations were identified recently. Well tests have shown high values of pressure and concentration of carbon dioxide in these reservoirs. The characterization of the fluids existing in the pores of the reservoir rocks is a task for the exploitation of the hydrocarbons. The objective of this work is to present the experimental set up that was assembled to perform PVT analysis for oils at high pressure, moderate temperature and high CO{sub 2} content, oils analogous to that found in the new Brazilian pre-salt discoveries. Samples of dead oil and synthetic gas were received at the laboratory, where the recombination was carried out to obtain live oil, with twelve mole percent CO{sub 2}. The fluids were maintained inside special cylinders, with a floating piston, separating two compartments, one with the test fluid and the other with hydraulic fluid. Pressure was provided by a positive displacement pump connected to the bottles. The experiments achieved pressures up to 70 MPa at constant temperature, conditions expected for the reservoir. Starting at the high pressure, the fluid volume was increased by withdrawing the hydraulic fluid from the cylinder. Pressure and volume were recorded to determine the bubble point and compressibility of the system. The pressure drop continued until the mixture was in the two phase region, finishing the constant composition expansion process. After that, the sample was re-pressurized and the PVT bottle was agitated to reach the thermodynamic equilibrium, when the live oil was at single phase again. An aliquot of this mixture was transferred, keeping their pressure and temperature conditions, to a high pressure viscometer and to a densimeter. Another portion of live oil was flashed to a test tube and to a gasometer, to render the gas oil ratio. Afterwards, successive additions of carbon dioxide increased its concentration in live oil to 15, 20 and 35

  19. Profiles of Reservoir Properties of Oil-Bearing Plays for Selected Petroleum Provinces in the United States

    Science.gov (United States)

    Freeman, P.A.; Attanasi, E.D.

    2015-11-05

    Profiles of reservoir properties of oil-bearing plays for selected petroleum provinces in the United States were developed to characterize the database to be used for a potential assessment by the U.S. Geological Survey (USGS) of oil that would be technically recoverable by the application of enhanced oil recovery methods using injection of carbon dioxide (CO2-EOR). The USGS assessment methodology may require reservoir-level data for the purposes of screening conventional oil reservoirs and projecting CO2-EOR performance in terms of the incremental recoverable oil. The information used in this report is based on reservoir properties from the “Significant Oil and Gas Fields of the United States Database” prepared by Nehring Associates, Inc. (2012). As described by Nehring Associates, Inc., the database “covers all producing provinces (basins) in the United States except the Appalachian Basin and the Cincinnati Arch.”

  20. Beneficial nutritional properties of olive oil: implications for postprandial lipoproteins and factor VII.

    Science.gov (United States)

    Williams, C M

    2001-08-01

    Previous research concerning protective cardiovascular properties of olive oil has focussed on the beneficial consequences on blood cholesterol levels of substituting dietary saturated fatty acids with oleic acid. Despite evidence implicating raised circulating triglycerides in the postprandial state in the pathogenesis of atherosclerosis and thrombosis, little research had been conducted to investigate effects of monounsaturated fatty acids on postprandial events. In a case control study of southern (n = 30) versus northern European (n = 30) men, significant differences in postprandial triglyceride and apolipoprotein (apo) B-48 response were observed, with evidence of attenuated and potentially beneficial responses in the Southern Europeans. In a randomised controlled study manufactured foods typical of the Northern European food culture, were used to deliver diets rich in either saturated or monounsaturated fatty acids (from olive oil). During the period of the olive oil enriched diet, LDL-cholesterol levels were 15% lower (p factor VII, as well as the production of factor VII antigen, was reduced on the olive oil diet. The study demonstrated significant improvements in biomarkers for cardiovascular disease in subjects osed to high olive oil diets (Southern Europeans) or transferred to such diets in the short term (Northern European volunteers). The study produced novel findings with respect to potential mechanisms by which diets high in monounsaturated fatty acids (MUFA) can reduce population risk of cardiovascular disease.

  1. Technological properties of amazonian oils and fats and their applications in the food industry.

    Science.gov (United States)

    Bezerra, Carolina Vieira; Rodrigues, Antonio Manoel da Cruz; de Oliveira, Pedro Danilo; da Silva, Dayala Albuquerque; da Silva, Luiza Helena Meller

    2017-04-15

    The application of lipids to food production is dependent on their physical, chemical, and nutritional properties. In this study, pracaxi oil, passion fruit oil, cupuassu fat, and palm stearin underwent physicochemical analyses and were combined at ratios of 40:60, 50:50, 60:40, and 70:30 to assess their potential applications in the food industry. Pracaxi oil, passion fruit oil, and cupuassu fat had interesting fatty acid profiles from a nutritional standpoint, displaying the lowest atherogenicity and thrombogenicity indices (0.02 and 0.14; 0.12 and 0.34; 0.16 and 0.65), respectively. Palm stearin had high thermal stability (7.23h). The primary applications of the blends obtained in this study are in table and functional margarine, particularly the pracaxi-stearin and passion fruit-stearin 40:60 and 50:50, pracaxi-cupuassu 60:40 and 70:30, and passion fruit-cupuassu 40:60 blends. The results suggest new industrial applications, especially for pracaxi and passion fruit oils, which are commonly applied in the cosmetic industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Physicochemical Properties and Storage Stability of Microencapsulated DHA-Rich Oil with Different Wall Materials.

    Science.gov (United States)

    Chen, Wuxi; Wang, Haijun; Zhang, Ke; Gao, Feng; Chen, Shulin; Li, Demao

    2016-08-01

    This study aimed to evaluate the physicochemical properties and storage stability of microencapsulated DHA-rich oil spray dried with different wall materials: model 1 (modified starch, gum arabic, and maltodextrin), model 2 (soy protein isolate, gum arabic, and maltodextrin), and model 3 (casein, glucose, and lactose). The results indicated that model 3 exhibited the highest microencapsulation efficiency (98.66 %) and emulsion stability (>99 %), with a moisture content and mean particle size of 1.663 % and 14.173 μm, respectively. Differential scanning calorimetry analysis indicated that the Tm of DHA-rich oil microcapsules was high, suggesting that the entire structure of the microcapsules remained stable during thermal processing. A thermogravimetric analysis curve showed that the product lost 5 % of its weight at 172 °C and the wall material started to degrade at 236 °C. The peroxide value of microencapsulated DHA-rich oil remained at one ninth after accelerated oxidation at 45 °C for 8 weeks to that of the unencapsulated DHA-rich oil, thus revealing the promising oxidation stability of DHA-rich oil in microcapsules.

  3. Chemical composition, antioxidant properties and anti-cholinesterase activity of Cordia gilletii (Boraginaceae) leaves essential oil.

    Science.gov (United States)

    Bonesi, Marco; Okusa, Philippe N; Tundis, Rosa; Loizzo, Monica R; Menichini, Federica; Stévigny, Caroline; Duez, Pierre; Menichini, Francesco

    2011-02-01

    This study aimed to investigate for the first time the chemical composition, the antioxidant properties and the acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activity of the essential oil from the leaves of Cordia gilletii De Wild (Boraginaceae). The essential oil, characterized by 23 constituents (90.1% of the total oil), was constituted by terpene derivatives (25.6%) and non-terpene derivatives (64.5%), among which aldehydes, fatty acids and alkanes were present with the percentage of 16.5%, 18.8% and 23.1%, respectively. The antioxidant activity of C. gilletii essential oil was screened by two in vitro tests: DPPH and beta-carotene bleaching test. The essential oil revealed antioxidant activity with an IC50 value of 75.0 and 129.9 microg/mL on DPPH radical and beta-carotene decoloration tests, respectively. Moreover, C. gilletii inhibited AChE enzyme with an IC50 value of 105.6 microg/mL.

  4. Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries.

    Science.gov (United States)

    Jia, Bo; Fan, Daming; Li, Jinwei; Duan, Zhenhua; Fan, Liuping

    2017-12-13

    This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO) and penetrated surface oil (PSO) of French fries and have no negative effects on its texture and also effectively control the final moisture content ( p French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries.

  5. 12 CFR 564.5 - Appraiser independence.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Appraiser independence. 564.5 Section 564.5 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPRAISALS § 564.5 Appraiser independence. (a) Staff appraisers. If an appraisal is prepared by a staff appraiser, that appraiser must be...

  6. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    Energy Technology Data Exchange (ETDEWEB)

    Mortley, Aba [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, P.O. Box 17000, Stn Forces, Kingston, ON, K7K 7B4 (Canada)], E-mail: aba.mortley@rmc.ca; Bonin, H.W.; Bui, V.T. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, P.O. Box 17000, Stn Forces, Kingston, ON, K7K 7B4 (Canada)

    2007-12-15

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging {sup 13}C solid state NMR spectra imply limited sample degradation with increasing radiation.

  7. Oil and gas property transfers: Analyzing the environmental risk through the environmental site assessment process

    International Nuclear Information System (INIS)

    Bratberg, D.; Hocker, S.

    1994-01-01

    The Superfund Act made anyone buying contaminated real estate liable for cleanup costs whether they know about the contamination or contributed to the contamination. In 1986, SARA amended the Superfund Act to include a provision known as the ''Innocent Landowner Defense.'' This provision created a defense for purchasers of contaminated property who did not contribute to the contamination and had no reason to believe that the property was contaminated at the time of the real estate transfer. SARA allows the purchasers and lenders to perform an environmental assessment using ''due diligence'' to identify contamination problems existing at a site. Since the passing of SARA, the environmental site assessment (ESA) process has become commonplace during the transfer of commercial real estate. Since the introduction of SARA, many professional associations, governmental agencies, and proposed federal legislation have struggled to produce a standard for conducting Phase 1 ESAs. Only recently has a standard been produced. Until recently, the domestic oil and gas industry has been relatively unconcerned about the Superfund liability issues. This approach was created by Congress's decision in 1980 to temporarily exempt the majority of oil and gas exploration and production wastes from federal hazardous waste rulings. However, new stringent rules governing oil and gas waste management practices are being considered by federal and state regulatory agencies. Based upon this knowledge and the awakening of public awareness, the use of ESAs for oil and gas transactions is increasing

  8. Improving Mechanical Properties of Thermoset Biocomposites by Fiber Coating or Organic Oil Addition

    Directory of Open Access Journals (Sweden)

    Truc T. Ngo

    2015-01-01

    Full Text Available Two different thermoset biocomposite systems are experimented in this study with the hope to improve their mechanical properties. Fiberglass and hemp, in form of fabrics, are used to reinforce the thermoset polymer matrix, which includes a traditional epoxy resin and a linseed oil-based bioresin (UVL. The fiber/polymer matrix interface is modified using two different approaches: adding a plant-based oil (pine or linseed to the polymer matrix or coating the fibers with 3-(aminopropyltriethoxysilane (APTES prior to integrating them into the polymer matrix. Epoxy resin is cured using an amine-based initiator, whereas UVL resin is cured under ultraviolet light. Results show that hemp fibers with APTES prime coat used in either epoxy or UVL matrix exhibit some potential improvements in the composite’s mechanical properties including tensile strength, modulus of elasticity, and ductility. It is also found that adding oil to the epoxy matrix reinforced with fiberglass mostly improves the material’s modulus of elasticity while maintaining its tensile strength and ductility. However, adding oil to the epoxy matrix reinforced with hemp doubles the material’s ductility while slightly reducing its tensile strength and modulus of elasticity.

  9. Epoxidized Vegetable Oils Plasticized Poly(lactic acid Biocomposites: Mechanical, Thermal and Morphology Properties

    Directory of Open Access Journals (Sweden)

    Buong Woei Chieng

    2014-10-01

    Full Text Available Plasticized poly(lactic acid PLA with epoxidized vegetable oils (EVO were prepared using a melt blending method to improve the ductility of PLA. The plasticization of the PLA with EVO lowers the Tg as well as cold-crystallization temperature. The tensile properties demonstrated that the addition of EVO to PLA led to an increase of elongation at break, but a decrease of tensile modulus. Plasticized PLA showed improvement in the elongation at break by 2058% and 4060% with the addition of 5 wt % epoxidized palm oil (EPO and mixture of epoxidized palm oil and soybean oil (EPSO, respectively. An increase in the tensile strength was also observed in the plasticized PLA with 1 wt % EPO and EPSO. The use of EVO increases the mobility of the polymeric chains, thereby improving the flexibility and plastic deformation of PLA. The SEM micrograph of the plasticized PLA showed good compatible morphologies without voids resulting from good interfacial adhesion between PLA and EVO. Based on the results of this study, EVO may be used as an environmentally friendly plasticizer that can improve the overall properties of PLA.

  10. Chemical properties of surimi seafood nutrified with ω-3 rich oils.

    Science.gov (United States)

    Pietrowski, Brittney N; Tahergorabi, Reza; Matak, Kristen E; Tou, Janet C; Jaczynski, Jacek

    2011-12-01

    Surimi-based seafood products are widely accepted and enjoyed worldwide. The US consumption increased in 1980s; however, it leveled thereafter. Food products nutrified with ω-3 polyunsaturated fatty acids (PUFAs) are in increasing demand due to demonstrated health benefits. Currently, surimi seafood is not nutrified with ω-3 PUFAs. In the present study, surimi seafood was nutritionally-enhanced with ω-3 PUFAs-rich oils (flaxseed, algae, menhaden, krill, and blend). The objectives were (1) chemical characterization of FA composition and oxidation, and (2) determination of physicochemical properties (colour and texture) of the nutritionally-enhanced surimi seafood. Oil addition resulted in increased (P<0.05) concentration of total ω-3 FAs in surimi seafood; however, the concentration of α-linolenic (ALA, 18:3ω-3), eicosapentaenoic (EPA, 20:5ω-3) and docosahexaenoic (DHA, 22:6ω-3) acids depended on which oil was added. Although the ω-3 PUFAs nutrification resulted in increased (P<0.05) susceptibility of surimi seafood to lipid oxidation, it was within ranges acceptable to consumers. Texture analysis (texture profile analysis, Kramer shear and torsion test) showed that ω-3 PUFAs nutrification did not affect texture. Colour properties of ω-3 PUFAs nutrified surimi seafood were generally improved except when krill oil or blend was added. This study demonstrates that nutritional value of surimi seafood can be enhanced with concurrent improvement of colour and without affecting texture. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. The Effect of Reactives Diluents to the Physical Properties of Acrylated Palm Oil Based Polyurethane Coatings

    Directory of Open Access Journals (Sweden)

    Onn Munirah

    2016-01-01

    Full Text Available The development of polyurethane with hydroxyl access in a molecule leads to a new alternative of low toxicity green product. Palm oil is one of the major commodities in Malaysia. The potential of palm oil to be used as coatings raw material such as alkyd is limited due to low unsaturated side on fatty acid chains. To overcome this limitation, palm oil was modified through transesterification process to produce polyol. Acrylated isocyanate (urethane oligomer was then grafted onto polyol to produce polyurethane with vinylic ends. The polyurethane was formulated with different cross-linkers (reactive diluents and cured under UV radiation. The effect of three different diluents; monoacrylate, diacrylate and triacrylate on the properties of cured polymer were studied in this research. Fourier Transform Infrared (FTIR, Hydroxyl Value Titration, Gel Content, and Volatile Organic Compound (VOC were used for characterization. Physical testing performed were Pencil Hardness and Pull-Off Adhesion test. Novel palm oil-based polyurethane coatings have been found to have good properties with mono acrylate functionality.

  12. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    International Nuclear Information System (INIS)

    Mortley, Aba; Bonin, H.W.; Bui, V.T.

    2007-01-01

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging 13 C solid state NMR spectra imply limited sample degradation with increasing radiation

  13. Tuning of Essential Oil Properties by Enzymatic Treatment: Towards Sustainable Processes for the Generation of New Fragrance Ingredients

    Directory of Open Access Journals (Sweden)

    Sylvain Antoniotti

    2014-07-01

    Full Text Available In this review, several strategies of modification of essential oils by enzymatic treatment are presented. Being either applied before or after the production of the essential oil, enzymatic methods are shown to be particularly adapted to attain the required selectivity, specificity and efficiency in sustainable processes delivering products eligible for the natural grade. Examples dealing with the optimization of the properties of essential oils in terms of biological activity, odor and safety are provided, and it is likely that these strategies will address other type of properties in the future, such as the physico-chemical properties, for example.

  14. Assessing the bioavailability of polyphenols and antioxidant properties of extra virgin argan oil by simulated digestion and Caco-2 cell assays. Comparative study with extra virgin olive oil.

    Science.gov (United States)

    Seiquer, Isabel; Rueda, Ascensión; Olalla, Manuel; Cabrera-Vique, Carmen

    2015-12-01

    Argan oil is becoming increasingly popular in the edible-oil market as a luxury food with healthy properties. This paper analyzes (i) the bioavailability of the polyphenol content and antioxidant properties of extra virgin argan oil (EVA) by the combination of in vitro digestion and absorption across Caco-2 cells and (ii) the protective role of the oil bioaccessible fraction (BF) against induced oxidative stress. Results were compared with those obtained with extra virgin olive oil (EVO). Higher values of polyphenols and antioxidant activity were observed in the BF obtained after the in vitro digestion of oils compared with the initial chemical extracts; the increase was higher for EVA but absolute BF values were lower than EVO. Bioaccessible polyphenols from EVA were absorbed by Caco-2 cells in higher proportions than from EVO, and minor differences were observed for antioxidant activity. Preincubation of cell cultures with BF from both oils significantly protected against oxidation, limiting cell damage and reducing reactive oxygen species generation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Method of Determining the Filtration Properties of oil-Bearing Crops in the Process of Their Pressing by the Example of Rape-oil Extrusion

    Science.gov (United States)

    Slavnov, E. V.; Petrov, I. A.

    2014-07-01

    A method of determining the change in the fi ltration properties of oil-bearing crops in the process of their pressing by repeated dynamic loading is proposed. The use of this method is demonstrated by the example of rape-oil extrusion. It was established that the change in the mass concentration of the oil in a rape mix from 0.45 to 0.23 leads to a decrease in the permeability of the mix by 101.5-102 times depending on the pressure applied to it. It is shown that the dependence of the permeability of this mix on the pressure applied to it is nonmonotone in character.

  16. Full Characterization of CO2-Oil Properties On-Chip: Solubility, Diffusivity, Extraction Pressure, Miscibility, and Contact Angle.

    Science.gov (United States)

    Sharbatian, Atena; Abedini, Ali; Qi, ZhenBang; Sinton, David

    2018-02-20

    Carbon capture, storage, and utilization technologies target a reduction in net CO 2 emissions to mitigate greenhouse gas effects. The largest such projects worldwide involve storing CO 2 through enhanced oil recovery-a technologically and economically feasible approach that combines both storage and oil recovery. Successful implementation relies on detailed measurements of CO 2 -oil properties at relevant reservoir conditions (P = 2.0-13.0 MPa and T = 23 and 50 °C). In this paper, we demonstrate a microfluidic method to quantify the comprehensive suite of mutual properties of a CO 2 and crude oil mixture including solubility, diffusivity, extraction pressure, minimum miscibility pressure (MMP), and contact angle. The time-lapse oil swelling/extraction in response to CO 2 exposure under stepwise increasing pressure was quantified via fluorescence microscopy, using the inherent fluorescence property of the oil. The CO 2 solubilities and diffusion coefficients were determined from the swelling process with measurements in strong agreement with previous results. The CO 2 -oil MMP was determined from the subsequent oil extraction process with measurements within 5% of previous values. In addition, the oil-CO 2 -silicon contact angle was measured throughout the process, with contact angle increasing with pressure. In contrast with conventional methods, which require days and ∼500 mL of fluid sample, the approach here provides a comprehensive suite of measurements, 100-fold faster with less than 1 μL of sample, and an opportunity to better inform large-scale CO 2 projects.

  17. Petroleum Oils

    Science.gov (United States)

    Different types of crude oil and refined product, of all different chemical compositions, have distinct physical properties. These properties affect the way oil spreads and breaks down, its hazard to marine and human life, and the likelihood of threat.

  18. MECHANICAL AND THERMAL PROPERTIES OF COMPOSITES FROM UNSATURATED POLYESTER FILLED WITH OIL PALM ASH

    Directory of Open Access Journals (Sweden)

    M.S. Ibrahim

    2012-06-01

    Full Text Available Oil palm ash (OPA is available in abundance, is renewable, can be obtained at no cost and shows good performance at high thermal conditions. Combinations of the unsaturated polyester with natural fillers have been reported to improve the mechanical and thermal properties of composites. Utilisation of oil palm ash as a filler in the manufacture of polymer composites can significantly reduce the requirement for other binders or matrixes of composite materials. This research uses oil palm ash as a filler to form composites through the investigation of the effect of different contents of filler on the properties of OPA-filled unsaturated polyester (UP/OPA composites. The effect of different volume fractions, i.e., 0, 10, 20 and 30 vol.% of oil palm ash introduced into 100, 90, 80 and 70 vol.% of an unsaturated polyester matrix on the composite mechanical properties, i.e., tensile and flexural, has been studied, together with thermal gravimetric analysis (TGA and differential scanning calorimetric (DSC. Specimens were prepared using compression moulding techniques based on the ASTM D790 and D5083 standards for flexural and tensile tests, respectively. The tensile and flexural mechanical properties of UP/OPA composites were improved in modulus by increasing the filler content. Thermal stability of the composites increased as the OPA filler content was increased, which was a logical consequence because of the high thermal stability of the silica compound of the OPA filler compared with that of the UP matrix. The results from the surface electron microscope (SEM analysis were the extension of mechanical and thermal tests.

  19. Edible films from essential-oil-loaded nanoemulsions: physicochemical characterization and antimicrobial properties

    OpenAIRE

    Acevedo Fani, Alejandra; Salvia Trujillo, Laura; Rojas Grau, María Alejandra; Martín Belloso, Olga

    2015-01-01

    Edible films including active ingredients can be used as an alternative to preserve food products. Essential oils (EOs) exhibit antimicrobial activity against pathogenic microorganisms but their low water solubility limits the application in foods. To improve water dispersion and protect EOs from degradation, nano-sized emulsions emerge as a viable alternative. Nanoemulsions containing EOs and polysaccharides could be used to form edible films with functional properties. This study was focuse...

  20. Simulation of the evaporation of drops from palm and castor oil biodiesels based on physical properties

    OpenAIRE

    Botero, Maria Luisa; Molina, Alejandro

    2010-01-01

    A reduction of oil reserves and an augmented production of greenhouse gases from fossil fuels have increased the use of biodiesel in internal combustion engines. Although physical and chemical properties of biodiesel and diesel are similar enough that allow the use of pure biodiesel in a traditional engine without considerable adjustments, differences in chemical structure of diesel and biodiesel change vaporization and combustion rates and can affect engine performance. In this study a model...

  1. Antioxidant, antimicrobial and toxicological properties of Schinus molle L. essential oils.

    Science.gov (United States)

    Martins, Maria do Rosário; Arantes, Silvia; Candeias, Fátima; Tinoco, Maria Teresa; Cruz-Morais, Júlio

    2014-01-01

    Schinus molle L. has been used in folk medicine as antibacterial, antiviral, topical antiseptic, antifungal, antioxidant, anti-inflammatory, anti-tumoural as well as antispasmodic and analgesic; however, there are few studies of pharmacological and toxicological properties of Schinus molle essential oils. The aim of this study was to evaluate the antioxidant and antimicrobial activities of Schinus molle leaf and fruit essential oils, correlated with their chemical composition and evaluate their acute toxicity. The chemical composition of Schinus molle leaf and fruit essential oils were evaluated by GC-FID and GC-MS. Antioxidant properties were determined using the 2,2-diphenyl-1-picryl-hydrazyl (DPPH) free radical and β-carotene/linoleic acid methods. Antimicrobial properties were evaluated by the agar disc diffusion method and minimal inhibitory concentration assay. Toxicity in Artemia salina and acute toxicity with behavioural screening in mice were evaluated. The dominant compounds found in leaf and fruit essential oils (EOs) were monoterpene hydrocarbons, namely α-phellandrene, β-phellandrene, β-myrcene, limonene and α-pinene. EOs showed low scavenging antioxidant activity by the DPPH free radical method and a higher activity by the β-carotene/linoleic acid method. Antimicrobial activity of EOs was observed for Gram+, Gram- pathogenic bacteria and food spoilage fungi. EOs showed totoxicity for Artemia salina and lower toxicity in Swiss mice. The result showed that EOs of leaves and fruits of Schinus molle demonstrated antioxidant and antimicrobial properties, suggesting their potential use in food or pharmaceutical industries. © 2013 Published by Elsevier Ireland Ltd.

  2. FASP, an analytic resource appraisal program for petroleum play analysis

    Science.gov (United States)

    Crovelli, R.A.; Balay, R.H.

    1986-01-01

    An analytic probabilistic methodology for resource appraisal of undiscovered oil and gas resources in play analysis is presented in a FORTRAN program termed FASP. This play-analysis methodology is a geostochastic system for petroleum resource appraisal in explored as well as frontier areas. An established geologic model considers both the uncertainty of the presence of the assessed hydrocarbon and its amount if present. The program FASP produces resource estimates of crude oil, nonassociated gas, dissolved gas, and gas for a geologic play in terms of probability distributions. The analytic method is based upon conditional probability theory and many laws of expectation and variance. ?? 1986.

  3. Synthesis and properties of a novel bio-based polymer from modified soybean oil

    Science.gov (United States)

    Li, Y. T.; Yang, L. T.; Zhang, H.; Tang, Z. J.

    2017-02-01

    Maleated acrylated epoxidized soybean oil (MAESO) was prepared by acrylated epoxidized soybean oil (AESO) and maleic anhydride. AESO were obtained by the reaction of epoxidized soybean oil (ESO) with acrylic acid as the ring-opening reagent. The polymer was prepared by MAESO react with styrene. The structures of the products were studied by Fourier transformation infrared spectrometer (FT-IR), and were consistent with the theoretical structures. Swelling experiment indicated that the crosslinking degree increased with increasing epoxy value of ESO. Thermal properties was tested by thermo-gravimetric analysis (TG) and differential scanning calorimetry analysis (DSC), indicating that glass transition temperature (Tg) of the polymer increased with increasing epoxy value of ESO, and thermal stability of polymer have a good correlation with the crosslinking degree. Mechanical properties analysis presented that tensile strength and impact strength affected by epoxy value of ESO. With the increase of epoxy value, the tensile strength increase, while the impact strength decrease. The property of the polymer ranged from elastomer to plastic character depended on the functionality of the ESO.

  4. Energy considerations in real estate appraising

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    Purposes of the seminar on the subject, the basis of this report, include the following: (1) to provide the appraiser an opportunity to learn how to identify and analyze the actual physical consumption of energy as well as the energy-saving improvements in properties under appraisal and in comparable sale and lease properties; (2) to help the appraiser in developing methods to keep meaningful records on the energy consumption of subject and comparable properties so as to observe in an orderly way the behavior of buyers, sellers, tenants, landlords, borrowers, and lenders with respect to energy efficiency; and (3) to assist the appraiser in learning to measure the relative sensitivities of the various segments of the market to energy considerations as indicated by differences in sale prices and rentals. To achieve these goals, the seminar employed two case studies, one for a angle-family residence and one for a multi-family building, both in Topeka, Kansas. The case studies are for illustrative purposes only; in applying the lessons of the seminar to their own daily work, students should be careful to develop information that is pertinent to their subject properties and subject areas and not rely on any of the particulars laid out in the cases.

  5. 36 CFR 254.9 - Appraisals.

    Science.gov (United States)

    2010-07-01

    ....9 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE LANDOWNERSHIP... contributory value of any interest in land such as water rights, minerals, or timber, to the extent they are... the physical characteristics of the land being appraised; a statement of all encumbrances; title...

  6. Conducting effective performance appraisals.

    Science.gov (United States)

    2001-01-01

    According to experts, performance appraisals rate just below firing someone as the least favorite thing managers do. Many factors contribute to this view--one is that current systems do a poor job of evaluating performance and in fact often impede both evaluation and performance. When used as part of an ongoing supportive process of goal setting and feedback, performance appraisals can enhance performance and morale. One alternative to traditional employee evaluation methods is full-circle or 360-degree feedback. Contained in this issue are practical suggestions for preparing employees for performance appraisals which, when followed daily, encourage employees to put their best feet forward as part of their regular routine. Also included is a template specific to assessing the performance of clinical laboratory technologists . Additionally, numerous resources are provided to help you refine appraisal systems to fit your needs. Full-circle feedback is proving to be a boon to managers. It relieves them from being the exclusive "heavies" in evaluating performance, integrates appraisal input from several sources, and incorporates increasing employee skills, competencies, and satisfaction, thus improving productivity of people and processes. And aren't integration and continuous improvement what the laboratory is all about?

  7. An experimental and theoretical study to relate uncommon rock/fluid properties to oil recovery. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Watson, R.

    1995-07-01

    Waterflooding is the most commonly used secondary oil recovery technique. One of the requirements for understanding waterflood performance is a good knowledge of the basic properties of the reservoir rocks. This study is aimed at correlating rock-pore characteristics to oil recovery from various reservoir rock types and incorporating these properties into empirical models for Predicting oil recovery. For that reason, this report deals with the analyses and interpretation of experimental data collected from core floods and correlated against measurements of absolute permeability, porosity. wettability index, mercury porosimetry properties and irreducible water saturation. The results of the radial-core the radial-core and linear-core flow investigations and the other associated experimental analyses are presented and incorporated into empirical models to improve the predictions of oil recovery resulting from waterflooding, for sandstone and limestone reservoirs. For the radial-core case, the standardized regression model selected, based on a subset of the variables, predicted oil recovery by waterflooding with a standard deviation of 7%. For the linear-core case, separate models are developed using common, uncommon and combination of both types of rock properties. It was observed that residual oil saturation and oil recovery are better predicted with the inclusion of both common and uncommon rock/fluid properties into the predictive models.

  8. Sensory properties during storage of crisps and French fries prepared with sunflower oil and high oleic sunflower oil

    NARCIS (Netherlands)

    Gemert, L.J. van

    1996-01-01

    A selected and trained descriptive sensory panel has assessed samples of crisps and French fries prepared on an industrial scale with either sunflower oil (SO) or high oleic sunflower oil (HOSO). Furthermore, crisps have been fried in these oils with or without dimethyl polysiloxane (DMPS).

  9. Oils

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, S

    1909-11-29

    Mineral, shale, and like oils are treated successively with sulfuric acid, milk of lime, and a mixture of calcium oxide, sodium chloride, and water, and finally a solution of naphthalene in toluene is added. The product is suitable for lighting, and for use as a motor fuel; for the latter purpose, it is mixed with a light spirit.

  10. The properties of poly(lactic acid)/starch blends with a functionalized plant oil: tung oil anhydride.

    Science.gov (United States)

    Xiong, Zhu; Li, Chao; Ma, Songqi; Feng, Jianxian; Yang, Yong; Zhang, Ruoyu; Zhu, Jin

    2013-06-05

    Bio-sourced polymers, polylactide (PLA) and starch, have been melt-blended by lab-scale co-extruder with tung oil anhydride (TOA) as the plasticizer. The ready reaction between the maleic anhydride on TOA and the hydroxyl on starch led TOA molecules to accumulate on starch and increased the compatibility of PLA/starch blends, which was confirmed by FT-IR analyses and SEM. The TOA could change the mechanical properties and physical behaviors of PLA/starch blends. DSC and DMA analysis show that the TOA layer on starch has an effect on the thermal behavior of PLA in the ternary blend. The enrichment of TOA on starch improves the toughness and impact strength of the PLA/starch blends. The adding amount of TOA in PLA/starch blends primarily determined the compatibility and mechanical properties of the resulted ternary blends. The tensile and impact fracture modes of the PLA/starch blend with or without TOA has also been investigated by SEM analysis. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  11. Low - temperature properties of rape seed oil biodiesel fuel and its blending with other diesel fuels

    International Nuclear Information System (INIS)

    Kampars, V.; Skujins, A.

    2004-01-01

    The properties of commercial bio diesel fuel depend upon the refining technique and the nature of the renewable lipids from which it is produced. The examined bio diesel fuel produced from rape seed oil by the Latvian SIA 'Delta Riga' has better low-temperature properties than many other bio diesels; but a considerably higher cloud point (-5,7 deg C), cold filter plugging point (-7 deg C) and pour point (-12 deg C) than the examined petrodiesel (grade C, LST EN 590:2000) from AB 'Mazeikiu nafta'. The low-temperature properties considerably improve if blending of these fuels is used. The blended fuels with bio diesel contents up to 90% have lower cold filter plugging points than petrodollar's. The estimated viscosity variations with temperature show that the blended fuels are Arrenius-type liquids, which lose this property near the cold filter plugging point. (authors)

  12. Appraisal of Transport Projects

    DEFF Research Database (Denmark)

    Jensen, Anders Vestergaard

    and robustness measures have been elaborated, which examine the subjective part of the MCDA (in form of criteria weights) and its role in decision support making. For this purpose both deterministic and stochastic sensitivity analyses have been developed. In addition, the focus has been formulating a framework...... into account the interests and preferences of different stakeholders. These various interests and preferences have been revealed by the use of decision conferencing, which engage the stakeholders and provide a common platform for understanding the decision problem. Leading up to this framework, this thesis has......, as robustness of a recommended solution is major concern in the final steps of decision making. As mentioned, the appraisal of transport projects is a complex issues involving conflict of various interests and this calls for new approaches to the practice of appraisal. The presented appraisal framework...

  13. Composition and properties of virgin pistachio oils and their by-products from different cultivars.

    Science.gov (United States)

    Ojeda-Amador, Rosa M; Fregapane, Giuseppe; Salvador, María Desamparados

    2018-02-01

    Pistachios (Pistacia vera) exhibit an interesting nutritional value, due to the high content of oleic acid and minor components with antioxidant and bioactive properties. This work aimed to characterize pistachio virgin oils and their partially defatted residual cakes, obtained from eight cultivars (Aegina, Avdat, Kastel, Kerman, Larnaka, Mateur, Napoletana, and Sirora). Interesting results on phenolics, tocopherols and antioxidant activity were observed, which were greatly affected by variety. Pistachio virgin oils are rich in healthy oleic acid (55-74%), phytosterols (3200-7600mg/kg) and γ-tocopherol (550-720mg/kg). A high content of phenolic compounds (8600-15000mg/kg gallic acid equivalents) and the corresponding antioxidant activities (12-46 and 155-496mmol/kg for DPPH and ORAC) of the residual cakes demonstrate their potential applications as functional ingredients and as rich sources of bioactive compounds. Moreover, virgin pistachio oils possess peculiar and pleasant sensory characteristics, contributing greater added value to the consumers compared to refined vegetable oils. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Fumigant and repellent properties of sesquiterpene-rich essential oil from Teucrium polium subsp. capitatum (L.)

    Institute of Scientific and Technical Information of China (English)

    Abbas Khani; Monireh Heydarian

    2014-01-01

    Objective:To test fumigant and repellent properties of sesquiterpene-rich essential oil from Teucrium polium subsp.capitatum(L.).Methods:The fumigant toxicity test was performed at(27±1)℃,(65±5)% relative humidity, and under darkness condition and24 h exposure time.The chemical composition of the isolated oils was examined by gas chromatography-mass spectrometry.Results:The major compounds wereα-cadinol(46.2%), caryophyllene oxide(25.9%), α muurolol epi(8.1%), cadalene(3.7%) and longiverbenone(2.9%).In all cases, considerable differences in mortality of insect to essential oil vapor were observed in different concentrations and exposure times.Callosobruchus maculatus(C. maculates)(LC50=148.9 μL/L air) was more susceptible to the tested plant product thanTeucrium castaneum(T. castaneum) (LC50=360.2 μL/L air) based onLC50 values.In the present investigation, the concentration of3 μL /mL acetone showed60% and52% repellency againstT. casteneumandC. maculatus adults, respectively.Conclusions:The results suggests that sesquiterpene-rich essential oils from the tested plant could be used as a potential control agent for stored-product insects.

  15. Antimicrobial properties of clove essential oil on raw hamburger during storage in freezer

    Directory of Open Access Journals (Sweden)

    S.E Hoseini

    2015-05-01

    Full Text Available Providing safe foods resistant to pathogens as well as replacing chemical preservatives with natural compounds including essential oils has attracted great attention in current studies. The purpose of this study was to investigate the antimicrobial properties of clove’s essential oil on hamburger. For this reason, clove essential oil was extracted by Clevenger apparatus method. Minimum Inhibitory Concentration (MIC of Staphylococcus aureus, Escherichia coli, Candida albicans and Aspergillus niger was measured. The antimicrobial effect of the essence in the concentrations of 0.0015%, 0.01%, 0.1% and 0.15% was examined on hamburger. The samples were examined at 0, 7, 30, 60 and 90 days of cold storage. Sensory characteristics of the samples were assessed through Hedonic method. MICs resulted from the test for S. aureus, E. coli, C. albicans and A. niger were 0.1%, 0.065%, 0.03% and 0.01% (V/V, respectively. The results of microbial examinations indicated that with the increasing of the concentration of clove oil essence and also with the progression of storage time, the microbial load was gradually decreased. According to the sensory assays conducted by the consumers, low concentrations of 0.0015% and maximum of 0.01% were found desirable.

  16. Antitumor Properties of the Essential Oil From the Leaves of Duguetia gardneriana.

    Science.gov (United States)

    Rodrigues, Ana Carolina B C; Bomfim, Larissa M; Neves, Sara P; Menezes, Leociley R A; Dias, Rosane B; Soares, Milena B P; Prata, Ana Paula N; Rocha, Clarissa A Gurgel; Costa, Emmanoel V; Bezerra, Daniel P

    2015-07-01

    Duguetia gardneriana, popularly known in the Brazilian northeast as "jaquinha", is a species belonging to the family Annonaceae. The aim of this work was to assess the chemical composition and antitumor properties of the essential oil from the leaves of D. gardneriana in experimental models. The chemical composition of the essential oil was analyzed via gas chromatography-flame ionization detector and gas chromatography-mass spectrometry. In vitro cytotoxic activity was determined in cultured tumor cells, and in vivo antitumor activity was assessed in B16-F10-bearing mice. The identified compounds were β-bisabolene (80.99%), elemicin (8.04%), germacrene D (4.15%), and cyperene (2.82%). The essential oil exhibited a cytotoxic effect, with IC50 values of 16.89, 19.16, 13.08, and 19.33 µg/mL being obtained for B16-F10, HepG2, HL-60, and K562 cell lines, respectively. On the other hand, β-bisabolene was inactive in all of the tested tumor cell lines (showing IC50 values greater than 25 µg/mL). The in vivo analysis revealed tumor growth inhibition rates of 5.37-37.52% at doses of 40 and 80 mg/kg/day, respectively. Herein, the essential oil from the leaves of D. gardneriana presented β-bisabolene as the major constituent and showed cytotoxic and antitumor potential. Georg Thieme Verlag KG Stuttgart · New York.

  17. Optimization of physicochemical and textural properties of pizza cheese fortified with soybean oil and carrot extract.

    Science.gov (United States)

    Motevalizadeh, Ehsan; Mortazavi, Seyed Ali; Milani, Elnaz; Hooshmand-Dalir, Moosa Al-Reza

    2018-03-01

    Response surface methodology (RSM) was used to optimize pizza cheese containing carrot extract. The effects of two important independent variables including soybean oil (5%-20%) and carrot extract (5%-20%) were studied on physicochemical and textural properties of pizza cheese containing carrot extract. According to the results, RSM was successfully used for optimizing formulation of pizza cheese containing carrot juice. Results of this study revealed that oil (A), carrot (B), AB, square term of carrot (B 2 ), B, AB, square term of oil (A 2 ), B 2 , AB, AB, A 2 B, A 2 , A 2 , A, A 2 , A 2 , AB, and AB 2 had the most effect on moisture, acidity, stretch, L*, a*, b*, hardness, meltability, springiness, peroxide value (PV), cohesiveness, chewiness, gumminess, fracture force, adhesiveness force, stiffness, flavor, and overall acceptability, respectively. A formulation upon 20% oil and 10.88% carrot extract was found as the optimal formulation for pizza cheese containing carrot extract. At the optimal formulation, PV, L*, a*, b*, meltability, stretch, cohesiveness, springiness, gumminess, chewiness, adhesive force, flavor, texture, and overall acceptability at the optimum formulation were measured 2.23, 82.51, -3.69, 18.05, 17.86, 85.61, 0.41, 7.874, 23.7, 0.27, 0.61, 3.50, 3.95, and 3.65, respectively.

  18. Relaxation dynamics and thermophysical properties of vegetable oils using time-domain reflectometry.

    Science.gov (United States)

    Sonkamble, Anil A; Sonsale, Rahul P; Kanshette, Mahesh S; Kabara, Komal B; Wananje, Kunal H; Kumbharkhane, Ashok C; Sarode, Arvind V

    2017-04-01

    Dielectric relaxation studies of vegetable oils are important for insights into their hydrogen bonding and intermolecular dynamics. The dielectric relaxation and thermo physical properties of triglycerides present in some vegetable oils have been measured over the frequency range of 10 MHz to 7 GHz in the temperature region 25 to 10 °C using a time-domain reflectometry approach. The frequency and temperature dependence of dielectric constants and dielectric loss factors were determined for coconut, peanut, soya bean, sunflower, palm, and olive oils. The dielectric permittivity spectra for each of the studied vegetable oils are explained using the Debye model with their complex dielectric permittivity analyzed using the Havriliak-Negami equation. The dielectric parameters static permittivity (ε 0 ), high-frequency limiting static permittivity (ε ∞ ), average relaxation time (τ 0 ), and thermodynamic parameters such as free energy (∆F τ ), enthalpy (∆H τ ), and entropy of activation (∆S τ ) were also measured. Calculation and analysis of these thermodynamic parameters agrees with the determined dielectric parameters, giving insights into the temperature dependence of the molecular dynamics of these systems.

  19. Emulsion stability and properties of fish gelatin-based films as affected by palm oil and surfactants.

    Science.gov (United States)

    Nilsuwan, Krisana; Benjakul, Soottawat; Prodpran, Thummanoon

    2016-05-01

    Gelatin films exhibit the poor water vapour barrier properties. The use of palm oil, which is abundant and available in Thailand, can be a means to lower water vapour migration. To disperse oil in film-forming dispersion (FFD), a surfactant along with appropriate homogenization is required. The study aimed to investigate the influence of palm oil level and surfactants in the absence or presence of glycerol on characteristics of FFD and resulting gelatin films. Similar oil droplet sizes, both d32 and d43 values, of FFD containing soy lecithin were observed, regardless of palm oil level used (P > 0.05). FFD with Tween-20 had larger droplet size as the levels of oil increased (P palm oil level increased (P 0.05). FFD containing 500 or 750 g kg(-1) palm oil using soy lecithin as a surfactant in the presence of 300 g kg(-1) glycerol had the enhanced homogeneity and stability of oil droplets. The resulting gelatin film had the improved water vapour barrier properties. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  20. Effect Of Gamma Irradiation On The Chemical Properties Of Olive And Linseed Oils During The Storage Period

    International Nuclear Information System (INIS)

    Farag, M.D.H.; Eweida, M.H.T.; Ali, H.E.; Refai, K.M.

    2013-01-01

    The quality of edible oil is usually determined in term of its quality constants and the change in these constants would affect the quality of the oil. Evaluation of gamma irradiation and storage period effects on olive and linseed oils was studied. The studied changes in the chemical properties for these oils were free fatty acid, peroxide value, thiobarbituric acid, iodine value and saponification value. The applied irradiation doses were 4, 6 and 8 kGy while the dose rate was 3.529 kGy/h at the time of experimentation. The non-irradiated oil samples were used as controls. The irradiated oil samples showed that free fatty acid, peroxide value and thiobarbituric acid were increased and the iodine value was decreased with increasing the doses of radiation and storage period while the saponification value did not change by changing the applied radiation doses. The statistical analysis of the data exhibited that there were non-significant effects in irradiated oils during the storage period. However, the values of chemical properties of non-irradiated and irradiated oil samples were still within the normal limits of edible oils recommended by the Egyptian Standard Specifications (2005 a, b)

  1. Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites

    International Nuclear Information System (INIS)

    Jawaid, M.; Khalil, H.P.S. Abdul; Bakar, A. Abu; Khanam, P. Noorunnisa

    2011-01-01

    Tri layer hybrid composites of oil palm empty fruit bunches (EFB) and jute fibres was prepared by keeping oil palm EFB as skin material and jute as the core material and vice versa. The chemical resistance, void content and tensile properties of oil palm EFB/Jute composites was investigated with reference to the relative weight of oil palm EFB/Jute, i.e. 4:1, the fibre loading was optimized and different layering pattern were investigated. It is found from the chemical resistance test that all the composites are resistant to various chemicals. It was observed that marked reduction in void content of hybrid composites in different layering pattern. From the different layering pattern, the tensile properties were slightly higher for the composite having jute as skin and oil palm EFB as core material. Scanning electron microscopy (SEM) was used to study tensile fracture surfaces of different composites.

  2. Chemical variation in Piper aduncum and biological properties of its dillapiole-rich essential oil.

    Science.gov (United States)

    de Almeida, Roseli R P; Souto, Raimundo N P; Bastos, Cleber N; da Silva, Milton H L; Maia, José G S

    2009-09-01

    The essential oils of the specimens of Piper aduncum that occur in deforested areas of Brazilian Amazon, North Brazil, are rich in dillapiole (35-90%), a derivative of phenylpropene, to which are attributed biological properties. On the other hand, the oils of the specimens with occurrence in the Atlantic Forest, and Northeastern and Southeastern Brazil, do not contain dillapiole, but only terpene compounds such as (E)-nerolidol and linalool. One specimen existing in the Amazon was hydrodistilled. The obtained oil was fractioned on a silica chromatographic column, resulting in fractions rich in dillapiole (95.0-98.9%) utilized for analyses by GC and GC/MS, structural characterization by NMR, confirmation of their biological properties, and to obtain the isomer isodillapiole. Dillapiole showed a fungicide action against the fungus Clinipellis perniciosa (witches' broom) by inhibition of its basidiospores, in concentrations ranging from 0.6 to 1.0 ppm. The larvicide and insecticide actions of dillapiole were tested against the larvae and the adult insects of Anopheles marajoara and Aedes aegypti (malaria and dengue mosquitoes), resulting in mortality of the larvae (48 h, 100%) at a concentration of 100 ppm, and mortality of the insects (30 min, 100%) at a concentration of 600 ppm. The isomeric isodillapiole showed no significant activity in the same biological tests.

  3. Properties of composite laminates based on basalt fibers with epoxidized vegetable oils

    International Nuclear Information System (INIS)

    Samper, M.D.; Petrucci, R.; Sanchez-Nacher, L.; Balart, R.; Kenny, J.M.

    2015-01-01

    Highlights: • New environmentally friendly composites from biobased epoxies and basalt fibers. • Improved performance with conventional silane treatment on basalt fabrics. • Composites with excellent appearance due to basalt shiny brown color. • Potential applications as substitute of glass fiber reinforced composites in engineering design. • Processing with conventional resin transfer molding (RTM) techniques. - Abstract: This paper deals with the development of polymeric materials derived from epoxidized vegetable oils which have been used in the manufacture of laminated composite materials with basalt fabrics. Epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO) were used as biobased matrices. The basalt fabrics were modified with amino-silane and glycidyl-silane to increase fiber–matrix interactions. The curing behavior of both resins was evaluated by differential scanning calorimetry (DSC) and oscillatory rheometry (OR). The evaluation of mechanical properties was made by tensile, flexural and Charpy tests. The extent of the fiber–matrix interactions among interface was evaluated by scanning electron microscopy (SEM). The obtained results revealed that surface modification of basalt fibers with glycidyl-silane clearly improves the mechanical properties of the composites. The use of the ELO resin as matrix for composite laminates improved substantially the mechanical performance compared to composites made with ESBO

  4. Revealing the properties of oils from their dissolved hydrocarbon compounds in water with an integrated sensor array system.

    Science.gov (United States)

    Qi, Xiubin; Crooke, Emma; Ross, Andrew; Bastow, Trevor P; Stalvies, Charlotte

    2011-09-21

    This paper presents a system and method developed to identify a source oil's characteristic properties by testing the oil's dissolved components in water. Through close examination of the oil dissolution process in water, we hypothesise that when oil is in contact with water, the resulting oil-water extract, a complex hydrocarbon mixture, carries the signature property information of the parent oil. If the dominating differences in compositions between such extracts of different oils can be identified, this information could guide the selection of various sensors, capable of capturing such chemical variations. When used as an array, such a sensor system can be used to determine parent oil information from the oil-water extract. To test this hypothesis, 22 oils' water extracts were prepared and selected dominant hydrocarbons analyzed with Gas Chromatography-Mass Spectrometry (GC-MS); the subsequent Principal Component Analysis (PCA) indicates that the major difference between the extract solutions is the relative concentration between the volatile mono-aromatics and fluorescent polyaromatics. An integrated sensor array system that is composed of 3 volatile hydrocarbon sensors and 2 polyaromatic hydrocarbon sensors was built accordingly to capture the major and subtle differences of these extracts. It was tested by exposure to a total of 110 water extract solutions diluted from the 22 extracts. The sensor response data collected from the testing were processed with two multivariate analysis tools to reveal information retained in the response patterns of the arrayed sensors: by conducting PCA, we were able to demonstrate the ability to qualitatively identify and distinguish different oil samples from their sensor array response patterns. When a supervised PCA, Linear Discriminate Analysis (LDA), was applied, even quantitative classification can be achieved: the multivariate model generated from the LDA achieved 89.7% of successful classification of the type of the

  5. Influence of press temperature on the properties of binderless particleboard made from oil palm trunk

    International Nuclear Information System (INIS)

    Hashim, Rokiah; Said, Norafizah; Lamaming, Junidah; Baskaran, Mohana; Sulaiman, Othman; Sato, Masatoshi; Hiziroglu, Salim; Sugimoto, Tomoko

    2011-01-01

    Research highlights: → Influence of press temperature on binderless particleboard of oil palm trunk. → Modulus of rupture increased with increasing press temperature. → The internal bond strength of samples meets JIS standard. → Water absorption and thickness swelling improved. → Increasing pressing temperature improve properties of the boards. -- Abstract: The objective of this investigation was to evaluate the properties of binderless particleboard manufactured from oil palm trunk as a function of press temperature. Particleboard samples were manufactured with a target density of 0.80 g/cm 3 using press temperatures of 160 o C, 180 o C and 200 o C. The modulus of rupture, internal bond strength, water absorption and thickness swelling of the boards were determined based on Japanese Industrial Standards (JIS). Thermal gravimetric analysis, Fourier transform infrared spectroscopy and field-emission scanning electron microscopy coupled with energy dispersive X-ray analysis were employed to characterize the properties of the raw materials and the manufactured panels. The moduli of rupture of the samples were observed to increase with increasing press temperature, but they did not meet the standard values. However, the internal bond strength of the samples attained satisfactory values according to the JIS standard for all three temperature levels. Water absorption and thickness swelling of the boards decreased with increasing pressing temperature. Based on the findings in this study, increasing the pressing temperature may be considered a potential way of improving the properties of binderless particleboard.

  6. Influence of Chemical Blends on Palm Oil Methyl Esters’ Cold Flow Properties and Fuel Characteristics

    Directory of Open Access Journals (Sweden)

    Obed M. Ali

    2014-07-01

    Full Text Available Alternative fuels, like biodiesel, are being utilized as a renewable energy source and an effective substitute for the continuously depleting supply of mineral diesel as they have similar combustion characteristics. However, the use of pure biodiesel as a fuel for diesel engines is currently limited due to problems relating to fuel properties and its relatively poor cold flow characteristics. Therefore, the most acceptable option for improving the properties of biodiesel is the use of a fuel additive. In the present study, the properties of palm oil methyl esters with increasing additive content were investigated after addition of ethanol, butanol and diethyl ether. The results revealed varying improvement in acid value, density, viscosity, pour point and cloud point, accompanied by a slight decrease in energy content with an increasing additive ratio. The viscosity reductions at 5% additive were 12%, 7%, 16.5% for ethanol, butanol and diethyl ether, respectively, and the maximum reduction in pour point was 5 °C at 5% diethyl ether blend. Engine test results revealed a noticeable improvement in engine brake power and specific fuel consumption compared to palm oil biodiesel and the best performance was obtained with diethyl ether. All the biodiesel-additive blend samples meet the requirements of ASTM D6751 biodiesel fuel standards for the measured properties.

  7. Subjective Ratings of Beauty and Aesthetics: Correlations With Statistical Image Properties in Western Oil Paintings

    Science.gov (United States)

    Lehmann, Thomas; Redies, Christoph

    2017-01-01

    For centuries, oil paintings have been a major segment of the visual arts. The JenAesthetics data set consists of a large number of high-quality images of oil paintings of Western provenance from different art periods. With this database, we studied the relationship between objective image measures and subjective evaluations of the images, especially evaluations on aesthetics (defined as artistic value) and beauty (defined as individual liking). The objective measures represented low-level statistical image properties that have been associated with aesthetic value in previous research. Subjective rating scores on aesthetics and beauty correlated not only with each other but also with different combinations of the objective measures. Furthermore, we found that paintings from different art periods vary with regard to the objective measures, that is, they exhibit specific patterns of statistical image properties. In addition, clusters of participants preferred different combinations of these properties. In conclusion, the results of the present study provide evidence that statistical image properties vary between art periods and subject matters and, in addition, they correlate with the subjective evaluation of paintings by the participants. PMID:28694958

  8. Influence of solubilizer PEG-40 hydrogenated castor oil on carbopol gels’ structural-mechanical properties

    Directory of Open Access Journals (Sweden)

    Ye. V. Gladukh

    2017-12-01

    Full Text Available Rheological properties affect all stages of the drug development – from development to production, the characteristics of the final products and stability. A lot of substances have complex rheological properties; their viscosity and elasticity can vary depending on conditions acting from the outside, such as stress, deformation, time factor and temperature. Concentration, stability and composition also significantly affect the rheological properties of drugs. One of the current trends in modern pharmacy is the development of drugs in the form of gels. The rheological properties of gels are significantly influenced by surface-active substances, stabilizers, solubilizers, stabilizing their structure. A special group of stabilizers are hydrogenated vegetable oils and their compounds with polymers, which have the ability to structure formation in interphase layers and in the volume of phases. For this purpose, PEG-40 hydrogenated castor oil is widely used. The aim of this work is to study the effect of hydrogenated castor oil, used as an emulsifier, solubilizer, viscosity modifier and solvent in the technology of semisolid dosage forms, on the structural and mechanical properties of carbopol gels. Materials and methods. 1% gel carbopol with additives PEG-40 hydrogenated castor oil in the concentration range from 1 to 5 % was investigated as experimental samples of the gel base. A 10 % propylene glycol additive was used as humectant and plasticizer. Structural and mechanical studies were carried out using a rotational viscometer «RheolabQC», Anton Paar (Austria with coaxial cylinders CCC27/SS. The graphs of the gels were automatically plotted using the computer program. Results. Analysis of the rheological parameters of the carbopol with PEG-40 hydrogenated castor oil gel base shows that the solubilizer has an active influence on the structural and mechanical properties of the base. Addition of PEG-40 GMM to the carbopol gel increases the yield

  9. Supercritical CO2 extraction of candlenut oil: process optimization using Taguchi orthogonal array and physicochemical properties of the oil.

    Science.gov (United States)

    Subroto, Erna; Widjojokusumo, Edward; Veriansyah, Bambang; Tjandrawinata, Raymond R

    2017-04-01

    A series of experiments was conducted to determine optimum conditions for supercritical carbon dioxide extraction of candlenut oil. A Taguchi experimental design with L 9 orthogonal array (four factors in three levels) was employed to evaluate the effects of pressure of 25-35 MPa, temperature of 40-60 °C, CO 2 flow rate of 10-20 g/min and particle size of 0.3-0.8 mm on oil solubility. The obtained results showed that increase in particle size, pressure and temperature improved the oil solubility. The supercritical carbon dioxide extraction at optimized parameters resulted in oil yield extraction of 61.4% at solubility of 9.6 g oil/kg CO 2 . The obtained candlenut oil from supercritical carbon dioxide extraction has better oil quality than oil which was extracted by Soxhlet extraction using n-hexane. The oil contains high unsaturated oil (linoleic acid and linolenic acid), which have many beneficial effects on human health.

  10. Effect of lubricant oil properties on the performance of gasoline particulate filter (GPF)

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Huifang; Lam, William; Remias, Joseph; Roos, Joseph; Seong, HeeJe; Choi, Seungmok

    2016-10-17

    Mobile source emissions standards are becoming more stringent and particulate emissions from gasoline direct injection (GDI) engines represent a particular challenge. Gasoline particulate filter (GPF) is deemed as one possible technical solution for particulate emissions reduction. In this work, a study was conducted on eight formulations of lubricants to determine their effect on GDI engine particulate emissions and GPF performance. Accelerated ash loading tests were conducted on a 2.4L GDI engine with engine oil injection in gasoline fuel by 2%. The matrix of eight formulations was designed with changing levels of sulfated ash (SASH) level, Zinc dialkyldithiophosphates (ZDDP) level and detergent type. Comprehensive evaluations of particulates included mass, number, size distribution, composition, morphology and soot oxidation properties. GPF performance was assessed through filtration efficiency, back pressure and morphology. It was determined that oil formulation affects the particulate emission characteristics and subsequent GPF performance.

  11. FAST PYROLYSIS – EFFECT OF WOOD DRYING ON THE YIELD AND PROPERTIES OF BIO-OIL

    Directory of Open Access Journals (Sweden)

    Eriks Samulis

    2007-11-01

    Full Text Available The composition and properties of the products of fast pyrolysis of hardwood, obtained in a two-chamber (drying and pyrolytic ablation type reactor in the temperature range 450-600ºС, were investigated. It has been found that, upon the additional drying of wood at 200ºС and subsequent pyrolysis, the quality of bio-oil is improved owing to the decrease in the amount of water and acids. It has been shown that the increase of the drying temperature to 240ºС decreases the yield of the main product. Optimum parameters of the drying conditions and the temperature of the pyrolysis of wood, at which the bio-oil yield exceeds 60% and its calorific value makes up 17-20 МJ/kg, have been determined.

  12. Properties of cellulose nanocrystals from oil palm trunk isolated by total chlorine free method.

    Science.gov (United States)

    Lamaming, Junidah; Hashim, Rokiah; Leh, Cheu Peng; Sulaiman, Othman

    2017-01-20

    Cellulose nanocrystals were isolated from oil palm trunk by total chlorine free method. The samples were either water pre-hydrolyzed or non-water pre-hydrolyzed, subjected to soda pulping, acidified and ozone bleached. Cellulose and cellulose nanocrystal (CNC) physical, chemical, thermal properties, and crystallinity index were investigated by composition analysis, scanning electron microscopy, transmission electron microscopy, fourier transform infrared, thermogravimetric analysis and X-ray diffraction. Water pre-hydrolysis reduced lignin (process compared to non-fibrillated of non-water pre-hydrolyzed cellulose. Water pre-hydrolysis improved final CNC crystallinity (up to 75%) compared to CNC without water pre-hydrolysis crystallinity (69%). Cellulose degradation was found to occur during ozone bleaching stage but CNC showed an increase in crystallinity after acid hydrolysis. Thus, oil palm trunk CNC can be potentially applied in pharmaceutical, food, medical and nanocomposites. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Effects of Nanoparticle Materials on Prebreakdown and Breakdown Properties of Transformer Oil

    Directory of Open Access Journals (Sweden)

    Yuzhen Lv

    2018-04-01

    Full Text Available In order to reveal the effects of nanoparticle materials on prebreakdown and breakdown properties of transformer oil, three types of nanoparticle materials, including conductive Fe3O4, semiconductive TiO2 and insulating Al2O3 nanoparticles, were prepared with the same size and surface modification. An experimental study on the breakdown strength and prebreakdown streamer propagation characteristics were investigated for transformer oil and three types of nanofluids under positive lightning impulse voltage. The results indicate that the type of nanoparticle materials has a notable impact on breakdown strength and streamer propagation characteristics of transformer oil. Breakdown voltages of nanofluids are markedly increased by 41.3% and 29.8% respectively by the presence of Fe3O4 and TiO2 nanoparticles. Whereas a slight increase of only 7.4% is observed for Al2O3 nanofluid. Moreover, main discharge channels with thicker and denser branches are formed and the streamer propagation velocities are greatly lowered both in Fe3O4 and TiO2 nanofluids, while no obvious change appears in the propagation process of streamers in Al2O3 nanofluid in comparison with that in pure oil. The test results of trap characteristics reveal that the densities of shallow traps both in Fe3O4 and TiO2 nanofluids are much higher than that in Al2O3 nanofluid and pure oil, greatly reducing the distortion of the electric field. Thus, the propagations of positive streamers in the nanofluids are significantly suppressed by Fe3O4 and TiO2 nanoparticles, leading to the improvements of breakdown strength.

  14. Physico-chemical properties, fatty acid and tocopherol composition of oils from some Sudanese oil bearing sources

    Directory of Open Access Journals (Sweden)

    Matthäus, Bertrand

    2008-12-01

    Full Text Available Seven oils, obtained from seven Sudanese oil bearing sources that are Albizia lebbek Oil (ALO, Cassia obtusifolia Oil (COO, Cassia occidentalis Oil (CCO, Abutilon pannosum Oil (APO, Mitracarpus villous Oil (MVO, Ipomea indica Oil (IIO and Sesamum alatum Oil (SAO, were investigated. The seeds were collected in Sudan from Ghibaish, North Kordofan state. In addition to the oil content, the fatty acid was determined by capillary gas chromatography and the tocopherols were evaluated by highperformance liquid chromatography. The oil content of the seven seeds amounted to 12.8, 7.0, 3.2, 7.1, 11.5, 8.8, and 21.3%, respectively.The oils contained 16.4, 20.0, 14.3, 16.8, 19.4, 19.9 and 10.9 % palmitic acid and 21.0, 24.4, 22.1, 10.9, 27.7, 34.0, 45.1 % oleic acid, and 43.8, 38.2, 45.0, 63.9, 34.6, 33.5, 36.3 % linoleic acid and traces of linolenic acid, respectively.The tocopherol content of these oils amounted to 85.6, 48.2, 32.7, 163.5, 52.5, 30.9, and 26.4 mg/100 g oil, respectively. Alpha-tocopherol was the predominant tocopherol in the oil of Albizia lebbek, Cassia obtusifolia, Cassia occidentalis, and Abutilon pannosum, while gamma-tocopherol was the predominant tocopherol in the oil of Mitracarpus villous, Ipomea indica and Sesamum alatum.Se analizan siete aceites procedentes de plantas y semillas de Sudán: Albizia lebbek Oil (ALO, Cassia obtusifolia Oil (COO, Cassia occidentalis Oil (CCO, Abutilon pannosum Oil (APO, Mitracarpus villous Oil (MVO, Ipomea indica Oil (IIO y Sesamum alatum Oil (SAO. Las semillas se recolectaron en el estado de Ghibaish, North Kordofan. Además del contenido en aceite (12.8, 7.0, 3.2, 7.1, 11.5, 8.8, y 21.3 %, respectivamente, se determinaron los ácidos grasos mediante cromatografía de gases y los tocoferoles mediante HPLC. Los aceites contenían, respectivamente, 16.4, 20.0, 14.3, 16.8, 19.4, 19.9 y 10.9 % de ácido palmitito, 21.0, 24.4, 22.1, 10.9, 27.7, 34.0, 45.1 % de ácido oleico, 43.8, 38.2, 45.0, 63.9, 34

  15. Biological Properties of Fucoxanthin in Oil Recovered from Two Brown Seaweeds Using Supercritical CO2 Extraction

    Directory of Open Access Journals (Sweden)

    Saravana Periaswamy Sivagnanam

    2015-05-01

    Full Text Available The bioactive materials in brown seaweeds hold great interest for developing new drugs and healthy foods. The oil content in brown seaweeds (Saccharina japonica and Sargassum horneri was extracted by using environmentally friendly supercritical CO2 (SC-CO2 with ethanol as a co-solvent in a semi-batch flow extraction process and compared the results with a conventional extraction process using hexane, ethanol, and acetone mixed with methanol (1:1, v/v. The SC-CO2 method was used at a temperature of 45 °C and pressure of 250 bar. The flow rate of CO2 (27 g/min was constant for the entire extraction period of 2 h. The obtained oil from the brown seaweeds was analyzed to determine their valuable compounds such as fatty acids, phenolic compounds, fucoxanthin and biological properties including antioxidant, antimicrobial, and antihypertension effects. The amounts of fucoxanthin extracted from the SC-CO2 oils of S. japonica and S. horneri were 0.41 ± 0.05 and 0.77 ± 0.07 mg/g, respectively. High antihypertensive activity was detected when using mixed acetone and methanol, whereas the phenolic content and antioxidant property were higher in the oil extracted by SC-CO2. The acetone–methanol mix extracts exhibited better antimicrobial activities than those obtained by other means. Thus, the SC-CO2 extraction process appears to be a good method for obtaining valuable compounds from both brown seaweeds, and showed stronger biological activity than that obtained by the conventional extraction process.

  16. Evaluation of the properties of tyre pyrolysis oils obtained in a conical spouted bed reactor

    International Nuclear Information System (INIS)

    Alvarez, J.; Lopez, G.; Amutio, M.; Mkhize, N.M.; Danon, B.; Gryp, P. van der; Görgens, J.F.; Bilbao, J.; Olazar, M.

    2017-01-01

    Waste truck tyre valorization by fast pyrolysis has been performed in a conical spouted bed reactor in the 425–575 °C range. The tyre pyrolysis oil (TPO) yield was found to decrease with increasing temperature whilst the yield of gas increased. The effect of temperature on TPO properties has been studied in order to establish the best possible valorization route. FTIR and chromatographic analysis revealed the presence of some undesired compounds with sulphur, nitrogen or oxygen functionalities (benzotiatholes, nitriles and carboxylic acids amongst others) and an increase of TPO aromaticity with increasing temperature. The carbon and sulphur content and the heating value of the TPO increased with temperature. The simulated distillation showed that approximately 70% of the TPOs produced at 425 and 475 °C correspond to diesel range, whereas that TPO obtained at 575 °C is between diesel and gasoline range. The properties of the TPOs evidenced their potential to substitute conventional fuels. However, some of them need to be improved, i.e., by reduction of the sulphur, nitrogen and aromatic content. Additionally, the TPO obtained at 425 and 475 °C could be an important source of limonene and that at 575 °C of xylenes, although current removal methods present some limitations. - Highlights: • The conical spouted bed reactor is suitable for truck tyre fast pyrolysis. • The highest oil yields are attained between 425 and 475 °C (≈58 wt %). • Tyre oil is a mixture of water, aromatic, aliphatic and heteroaromatic compounds. • Limonene is the major compound with a maximum yield of 13.30 wt % at 475 °C. • 425 and 475 °C oils share similarities with diesel and 575 °C one with gasoline.

  17. Biological Properties of Fucoxanthin in Oil Recovered from Two Brown Seaweeds Using Supercritical CO2 Extraction.

    Science.gov (United States)

    Sivagnanam, Saravana Periaswamy; Yin, Shipeng; Choi, Jae Hyung; Park, Yong Beom; Woo, Hee Chul; Chun, Byung Soo

    2015-05-29

    The bioactive materials in brown seaweeds hold great interest for developing new drugs and healthy foods. The oil content in brown seaweeds (Saccharina japonica and Sargassum horneri) was extracted by using environmentally friendly supercritical CO2 (SC-CO2) with ethanol as a co-solvent in a semi-batch flow extraction process and compared the results with a conventional extraction process using hexane, ethanol, and acetone mixed with methanol (1:1, v/v). The SC-CO2 method was used at a temperature of 45 °C and pressure of 250 bar. The flow rate of CO2 (27 g/min) was constant for the entire extraction period of 2 h. The obtained oil from the brown seaweeds was analyzed to determine their valuable compounds such as fatty acids, phenolic compounds, fucoxanthin and biological properties including antioxidant, antimicrobial, and antihypertension effects. The amounts of fucoxanthin extracted from the SC-CO2 oils of S. japonica and S. horneri were 0.41 ± 0.05 and 0.77 ± 0.07 mg/g, respectively. High antihypertensive activity was detected when using mixed acetone and methanol, whereas the phenolic content and antioxidant property were higher in the oil extracted by SC-CO2. The acetone-methanol mix extracts exhibited better antimicrobial activities than those obtained by other means. Thus, the SC-CO2 extraction process appears to be a good method for obtaining valuable compounds from both brown seaweeds, and showed stronger biological activity than that obtained by the conventional extraction process.

  18. Physico-chemical properties of blends of palm olein with other vegetable oils

    Directory of Open Access Journals (Sweden)

    Mobin Siddique, Bazlul

    2010-12-01

    Full Text Available Palm oil (olein was blended with other edible oils for the enhancement of its market acceptability in terms of melting point depression and shelf life. The physico-chemical properties like viscosity, density, melting behavior, peroxide value (PV, saponification value (SV and iodine value (IV of four different binary blends with four vegetable oils were evaluated. Palm olein was found to be more stable against rancidity than the other oils. For the stability against oxidation and melting point depression the palm olein-canola (PO/CO blend was found to be better than the others. The Differential Scanning Calorimeter (DSC thermogram of the melting behavior of the blends traces some new polymorphs of the triglyceride. This study will help the oil producing industry to find out the most economically viable oil blends for cooking purposes, with maximum nutrition as well as desirable physico-chemical properties.

    Aceite de palma (oleína fue mezclada con otros aceites comestibles para aumentar su aceptabilidad en el mercado en términos de descenso del punto de fusión y mejora de su almacenamiento. Las propiedades físico-químicas tales como viscosidad, densidad, comportamiento en la fusión, valor de peróxidos (PV, valor de saponificación (SV e índice de yodo (IV de cuatro diferentes mezclas binarias con cuatro aceites vegetales fueron evaluadas. La oleína de palma fue más estable frente a la rancidez que otros aceites. En la estabilidad frente la oxidación y el descenso del punto de fusión, la mezcla de oleína de palma/canola (PO/CO fue mejor que las otras. Los termogramas del calorímetro diferencial de barrido (DSC referidos al comportamiento de fusión de las mezclas indican algunos nuevos polimorfismos de los triglicéridos. Este estudio podría ayudar a las empresas que elaboran aceites a encontrar los aceites económicamente más viables para cocinar, con buenas propiedades nutricionales, así como con unas propiedades f

  19. Quality Characteristics of Iranian Extra Virgin Flaxseed Oil and the Effect of the Refining Stages before Deodorization on its Physicochemical Properties

    OpenAIRE

    Manochehr Bahmaei; Yousef Ramezan; Parvin Eshratabadi

    2017-01-01

    Flaxseed oil is known as a functional oil because of the high content of α-linolenic acid; therefore, the aim of this research was to investigate some physicochemical properties of Iranian extra virgin flaxseed oil (EVFO) and the impact of the refining stages before deodorization on these properties. Fatty acid composition, peroxide and anisidine values, free fatty acids, Crystallization point, chlorophyll content, β-carotene content, and color were analyzed. The Iranian flaxseed oils had abo...

  20. A comparative analysis of physical and chemical properties of Jatropha Curcas. L, Calophyllum Inophyllum. L and Sterculia Feotida. L oil

    Energy Technology Data Exchange (ETDEWEB)

    Silitonga, A.S. [Department of Mechanical Engineering, Medan State Polytechnic (Indonesia)], email: ardinsu@yahoo.co.id, email: a_atabani2@msn.com; Atabani, A.E. [Department of Mechanical Engineering, University of Khartoum (Sudan); Mahlia, T.M.I. [Department of Mechanical Engineering, Syiah Kuala University, (Indonesia); Masjuki, H.H.; Badruddin, I.A. [Department of Mechanical Engineering, University of Malaya (Malaysia)

    2011-07-01

    Production of bio-diesel converted from edible oil has raised the issue of competition for resources between food production and fuel production, as well as other questions of environmental impact. It has been established that producing bio-diesel from non-edible vegetable oils was one of the effective ways to resolve these issues. Jatropha curcas L., Calophyllum inophyllum L., and Sterculia foetida L. are all non-edible oils and all can be potential sources for future energy supply. The purpose of this paper is to reveal the results of a comparative analysis of the physical and chemical properties of Jatropha curcas L., Calophyllum inophyllum L., and Sterculia foetida L. oils. Physical and chemical properties of these vegetable oils, such as density, iodine value, free fatty acid, etc. were investigated and measured. These properties were then compared with those of other non-edible vegetable oils in terms of potential. This paper finds that the results of analysis indicate that there is high potential for using Jatropha curcas L., Calophyllum inophyllum L., and Sterculia foetida L. crude oil as an alternative fuel.

  1. Enzymatic interesterification on the physicochemical properties of Moringa oleifera seed oil blended with palm olein and virgin coconut oil

    Directory of Open Access Journals (Sweden)

    Dollah, S.

    2015-06-01

    Full Text Available The enzymatic interesterification (IE of palm olein (PO and virgin coconut oil (VCO with the high oleic acid (86% Moringa oleifera seed oil (MoO could yield a good source of oleic acid fat stock that may contain desirable nutritional and physical properties. Lipozyme RMIM resulted in different functionalities for the MoO/PO and MoO/VCO blends due to inherent changes in triacylglycerol (TAG compositions which, in turn, led to different trends in DSC thermograms and solid fat contents (SFC. The enzymatic IE of MoO/VCO increased U2S and S2U (up to 20% medium and long chain, MLCT while it decreased U3 (triunsaturated and S3 (trisaturated TAGs. The IE of the MoO/PO blends increased U2S and S3 (MMP, myristic, myristic, palmitic and decreased S2U, resulting in a lowering of melting points and SFC for MoO/VCO, while showing an increase in them for MoO/PO. A 2.55% increase in S3 after 24 h MoO/PO 30:70 IE revealed a 6.5% harder oil at 10 °C which may imply a wider application compared to the original liquid oils. Novel MLCTs with improved nutritional and physical properties were generated in the MoO/VCO blends after IE due to the incorporation of oleic acid and medium chain fatty acids. MoO/PO 50:50 and 70:30 w/w after 12 h IE and MoO/VCO 30:70 are suitable for incorporation into the fat phase in ice-cream formulations while, the spreadability and plasticity of MoO/VCO 70:30 improved at low temperatures. Both interesterified blends could be used as high oleic acid frying oils.La interesterificación enzimática (IE de la oleína de palma (PO, aceite de coco virgen (VCO con alto contenido en ácido oleico (86% y aceites de semilla de Moringa oleífera (MOO podría ser una buena fuente de ácido oleico con propiedades nutricionales y físicas deseables. La lipozyme RMIM produce diferentes funcionalidades para las mezclas MoO/PO y MoO/ VCO debido a los cambios inherentes en la composición de triacilgliceroles (TAG que, a su vez, dieron lugar a diferentes

  2. Oils

    Energy Technology Data Exchange (ETDEWEB)

    Cobbett, G T.B.

    1907-07-08

    Crude petroleum having a density of 850 to 900 is purified with sulfuric acid, decanted, mixed with benzine or petrol, and again treated with sulfuric acid and decanted. The remaining acid and coloring-matter are removed by washing with water, or treating with oxalic acid, zinc carbonate, lead carbonate, calcium carbonate, or oxide of zinc. The product is used as a fuel for internal-combustion engines. Specifications No. 28,104, A.D. 1906, and No. 12,606, A.D. 1907, are referred to. According to the Provisional Specification, the process is applicable to shale or schist oil.

  3. Lipids of Rhodotorula mucilaginosa IIPL32 with biodiesel potential: Oil yield, fatty acid profile, fuel properties.

    Science.gov (United States)

    Khot, Mahesh; Ghosh, Debashish

    2017-04-01

    This study analyzes the single cell oil (SCO), fatty acid profile, and biodiesel fuel properties of the yeast Rhodotorula mucilaginosa IIPL32 grown on the pentose fraction of acid pre-treated sugarcane bagasse as a carbon source. The yeast biomass from nitrogen limiting culture conditions (15.3 g L -1 ) was able to give the SCO yield of 0.17 g g -1 of xylose consumed. Acid digestion, cryo-pulverization, direct in situ transesterification, and microwave assisted techniques were evaluated in comparison to the Soxhlet extraction for the total intracellular yeast lipid recovery. The significant differences were observed among the SCO yield of different methods and the in situ transesterification stood out most for effective yeast lipid recovery generating 97.23 mg lipid as FAME per gram dry biomass. The method was fast and consumed lesser solvent with greater FAME yield while accessing most cellular fatty acids present. The yeast lipids showed the major presence of monounsaturated fatty esters (35-55%; 18:1, 16:1) suitable for better ignition quality, oxidative stability, and cold-flow properties of the biodiesel. Analyzed fuel properties (density, kinematic viscosity, cetane number) of the yeast oil were in good agreement with international biodiesel standards. The sugarcane bagasse-derived xylose and the consolidated comparative assessment of lab scale SCO recovery methods highlight the necessity for careful substrate choice and validation of analytical method in yeast oil research. The use of less toxic co-solvents together with solvent recovery and recycling would help improve process economics for sustainable production of biodiesel from the hemicellulosic fraction of cheap renewable sources. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Basic properties of crude rubber seed oil and crude palm oil blend as a potential feedstock for biodiesel production with enhanced cold flow characteristics

    International Nuclear Information System (INIS)

    Yusup, Suzana; Khan, Modhar

    2010-01-01

    Research and development in the field of biodiesel showed that fatty acid methyl esters synthesized from agriculture or animal oils and fats, which exhibit qualifying properties, can replace diesel fuel used in internal combustion engine. However, the industry had some downfall recently with the fluctuating prices of edible oils and increasing demand for nutritional needs. Crude rubber seed oil (CRSO) and crude palm oil (CPO) were used in this study since both can be extracted and produced locally in Malaysia from their abundant plantations. The benefits of introducing such blend are that CRSO is considered a non-edible feedstock with no major industrial utilizations that has the potential to reduce the usage of CPO in biodiesel industry and was found to enhance the cold flow characteristics when blended with CPO by reducing the saturated fatty acids in the feedstock. The oils and blends were characterized for density, kinematic viscosity, heating value, acid value, free fatty acid content, refractive index, mono-, di- and triglycerides and sulphur content. Fatty acids composition and iodine value were established for an equivolume blend of the oils.

  5. Basic properties of crude rubber seed oil and crude palm oil blend as a potential feedstock for biodiesel production with enhanced cold flow characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Yusup, Suzana; Khan, Modhar [Chemical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia)

    2010-10-15

    Research and development in the field of biodiesel showed that fatty acid methyl esters synthesized from agriculture or animal oils and fats, which exhibit qualifying properties, can replace diesel fuel used in internal combustion engine. However, the industry had some downfall recently with the fluctuating prices of edible oils and increasing demand for nutritional needs. Crude rubber seed oil (CRSO) and crude palm oil (CPO) were used in this study since both can be extracted and produced locally in Malaysia from their abundant plantations. The benefits of introducing such blend are that CRSO is considered a non-edible feedstock with no major industrial utilizations that has the potential to reduce the usage of CPO in biodiesel industry and was found to enhance the cold flow characteristics when blended with CPO by reducing the saturated fatty acids in the feedstock. The oils and blends were characterized for density, kinematic viscosity, heating value, acid value, free fatty acid content, refractive index, mono-, di- and triglycerides and sulphur content. Fatty acids composition and iodine value were established for an equivolume blend of the oils. (author)

  6. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    OpenAIRE

    Mussatti, Eleonora; Merlini, Claudia; Barra, Guilherme Mariz de Oliveira; Güths, Saulo; Oliveira, Antonio Pedro Novaes de; Siligardi, Cristina

    2012-01-01

    The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3). The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5%) were prepared through the casting process followed by compression molding at room temperature. The composites were ana...

  7. Physicochemical properties of soybean oil extracted from γ-irradiated soybeans

    International Nuclear Information System (INIS)

    Myung-Woo Byun; Il-Jun Kang; Joong-Ho Kwon; Hayashi, Yukako; Mori, Tomohiko

    1996-01-01

    Physicochemical properties of soybean oil extracted from γ-irradiated soybeans (0-10 kGy) were investigated. No significant changes were observed in the total lipid content, fatty acid composition, acid value, peroxide value and trans fatty acid content at different irradiation doses. A tendency toward increased induction period was observed as irradiation dose increased. At higher dose levels than 10 kGy, n-hexanal increased remarkably as dose levels increased, showing the possibility of a chemical index for over-dose irradiation in soybeans. (author)

  8. Physiochemical properties of soybean oil extracted from γ-irradiated soybeans

    International Nuclear Information System (INIS)

    Byun, M.W.; Kang, I.J.; Kwon, J.H.; Hayashi, Y.; Mori, T.

    1995-01-01

    Physicochemical properties of soybean oil extracted from γ-irradiated soybeans (0-10kGy) were investigated. No significant changes were observed in the total lipid content, fatty acid composition, acid value, peroxide value and trans fatty acid content at different irradiation doses. A tendency toward increased induction period was observed as irradiation dose increased. At higher dose levels than 10 kGy, n-hexagonal content remarkably increased as dose levels increased, showing the possibility of a chemical index for over-dose irradiation in soybeans. (Author)

  9. Swelling and tribological properties of melt-mixed fluoroelastomer/nitrile rubber blends under crude oil

    Science.gov (United States)

    Tagelsir, Yasin; Li, San-Xi; Lv, Xiaoren; Wang, Shijie; Wang, Song; Osman, Zeinab

    2018-01-01

    The melt-mixed fluoroelastomer (FKM)/ nitrile rubber (NBR) blends of (90/10, 80/20, 70/30, 60/40 and 50/50) ratios with same hardness were prepared, and their swelling and tribological properties under crude oil were investigated for the purpose of developing high performance cost-effective elastomers meeting requirement of oil extraction progressive cavity pump stator. Differential scanning calorimetry confirmed compatible blend system for all blends. Field emission scanning electron microscopy (FE-SEM) showed co-continuous morphology of 200-400 nm phase size for all blends, expect FKM/NBR (90/10) which exhibited partially continuous phase morphology of 100-250 nm phase size. The results of swelling and linear wear tests under crude oil indicated that swelling percentage, coefficient of friction and specific wear rate of FKM/NBR blends were much better than NBR, with FKM/NBR (90/10 and 80/20) showing swelling percentage and specific wear rate very close to FKM. Attenuated total reflectance-Fourier transform infrared spectroscopy disclosed that fracture of macromolecular chains was the main mechanochemical effect of unswollen and swollen worn surfaces, in addition to oxygenated degradation detected with increasing NBR ratio in the blends. The fracture of macromolecular chains resulted in slight fatigue wear mechanism, which was also confirmed by FE-SEM of the worn surfaces.

  10. Physical and nutritional properties of baby food containing added red salmon oil (Oncorhynchus nerka) and microencapsulated red salmon oil

    Science.gov (United States)

    Unpurified red salmon oil (UPSO) was purified (PSO) using chitosan. Both unpurified and purified oils were evaluated for peroxide value (PV), free fatty acids (FFA), fatty acid methyl esters (FAME), moisture, and color. An emulsion system containing PSO (EPSO) was prepared: system was analyzed for c...

  11. Systematic methodology and property prediction of fatty systems for process design/analysis in the oil and fat industry

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Ceriani, Roberta; Gani, Rafiqul

    2010-01-01

    in the vegetable oil were defined. Basic and critical properties were then computed by means of appropriate property prediction software. Temperature dependant properties were modeled using and extending available correlations. The process model was developed through the PRO II commercial simulator and validated......A systematic model based methodology has been developed and its application highlighted through the solvent recovery section of a soybean oil extraction process, with emphasis on the effect of design variables on the process performance. First, the most representative compounds present...

  12. Oil on seawater

    International Nuclear Information System (INIS)

    Boerresen, J.A.

    1993-01-01

    The present book discusses the effects of oil spills at sea. Topics covered are as follow: Petroleum properties; oil spills at sea; harmfulness of oil spills; effects from acute oil spills; experience of oil spills; oil spill contingency planning in Norway; oil spill protecting equipment and methods; emergency of unloading equipment. 252 refs., 86 figs., 54 tabs

  13. Effects of oregano oil, carvacrol, cinnamaldehyde, and citral on antimicrobial, mechanical and barrier properties of carrot puree films

    Science.gov (United States)

    Wang, Xinwei; Liu, Huan; Wei, Jing; Ma, Zhongsu

    2011-02-01

    The effects against staphfloccus aureus and escherichia coli of oregano oil, carvacrol, cinnamaldehyde, and citral in chitosan-corn starch-gelatin-carrot puree films at 0.5% to 3% (w/w) concentrations were investigated along with the mechanical and barrier properties of the films. The presence of oregano oil, carvacrol, cinnamaldehyde, and citral did not change the good oxygen barrier of the films, but did significantly modify tensile properties and water vapor permeability, and made films darker. The data also show that the antimicrobial activities were in the following order: cinnamaldehyde > carvacrol > oregano oil > citral. Moreover, the antimicrobial films were more effective against staphfloccus aureus than against the escherichia coli. This study showed that oregano oil, carvacrol, cinnamaldehyde, and citral, especially the first three, could be used to prepare antimicrobial edible films for food applications.

  14. Ultralight Graphene/Carbon Nanotubes Aerogels with Compressibility and Oil Absorption Properties

    Directory of Open Access Journals (Sweden)

    Da Zhao

    2018-04-01

    Full Text Available Graphene aerogels have many advantages, such as low density, high elasticity and strong adsorption. They are considered to be widely applicable in many fields. At present, the most valuable research area aims to find a convenient and effective way to prepare graphene aerogels with excellent properties. In this work graphene/carbon nanotube aerogels are prepared through hydrothermal reduction, freeze-drying and high temperature heat treatment with the blending of graphene oxide and carbon nanotubes. A new reducing agent-ascorbic acid is selected to explore the best preparation process. The prepared aerogels have compression and resilience and oil absorption properties due to the addition of carbon nanotubes as designed.

  15. How much due diligence is enough? (in oil and gas property transactions)

    International Nuclear Information System (INIS)

    Edie, D.C.

    1999-01-01

    The issue of due diligence for oil and gas property transactions was discussed, with particular emphasis on how to find an appropriate balance between cost and protection (risk aversion) within an available time period. The paper focused primarily on oil and gas reserves transactions comprised of petroleum and natural gas rights, leases, operating and title documents, tangibles and the regulatory authorizations needed to acquire, hold and operate these assets. Various concerns related to gas processing plants and pipeline facilities were also treated. Issues of due diligence that should always be raised were emphasized. These are: (1) acceptability of the purchaser to the Alberta Energy and Utilities Board or other regulators as an operator for the purposes of transfer of well and facility licenses, (2) assessment of the purchaser's financial status for environmental liabilities relating to the assets following closing, (3) in an asset swap, property due diligence will be the same for both parties, and (4) where the assets are sold in exchange for stock, the purchaser should at least address concerns about the purchaser's liquidity, the purchaser's underlying asset value, and necessary regulatory authorizations to issue the stock. 10 refs

  16. Lithological and petrophysical properties and prospects of oil and gas presence of Kalinsky series in Absheron

    International Nuclear Information System (INIS)

    Kheirov, M.B; Dilbazi, Z.H; Askerov, F.H; Imanov, A.D.

    2002-01-01

    Full text:The presentation is is dedicated to summarizing the results of studying lithological and petrographic peculiarities and petrophysical properties of relatively scarcely studied rocks of lower Pliocene Kalinsky Series in Absheron, particularly its lower horizons, as well as to determining the regularities of these properties change about the area, as well as along the geological section. These generalisation cover the areas of Gala, Turkany, Gala-Dubendy, Govsany, Garachukhur, Bina, Zykh, Peschany island, Chilov, Khali, Gryazevaya sopka, Pirallakhy, and they are necessary for determining the direction of exploration and increasing the efficiency of productive horizons development. Kalinsky series is represented mostly by the alternation of siltstones, sandstones and shale and subjected to lithofacial changes along the section and about the area. In the reservoir sections studied Kalinsky series is mostly of polymetallic composition and is represented by badly sorted rocks. The sorting coefficient is within the range 2.5-4.7. Sands and sandstones occur relatively seldom. Thus, Kalinsky series, and its lower horizons in particular are scarcely studied. In some areas these horizons in particular are scarcely studied. In some areas horizons are not exposed. That is why for the purpose of oil and gas presence degree clarification it is necessary to resume exploration in Absheron oil and gas bearing region Kalinsky series, and in particular in its lower horizons

  17. Zinc availability in relation to selected soil properties in a crude oil polluted eutric tropofluvent

    International Nuclear Information System (INIS)

    Chukwuma, M.C.; Eshett, E.T.; Onweremadu, E.U.; Okon, M.A.

    2010-01-01

    This study examined zinc availability in crude oil-polluted soils. The aim of the study was to determine the effect of zinc on the physiochemical properties of soils in relation to remediation activities. The study was located at a site in Nigeria where crude oil spillage had occurred over a period of 2 months. The region was characterized by quarternary, alluvium, meander belt, wooded back swamps as well as fresh water swamps and Sombreiro-Warri Deltaic plains with large deposits of petroleum and natural gas. Three different land units were studied, notably (1) unpolluted, (2) polluted without vegetation and (3) polluted with vegetation. Soil sampling was conducted using a transect method. Hydrometer analyses were conducted to determine particle size distribution, while a core method was used to determine bulk density. Soil pH, total carbon, phosphorus, and total nitrogen were also measured. An analysis of variance (ANOVA) was used to correlate and regress zinc availability against the selected soil properties. The study showed that zinc availability increased with increases in the value of the effective carbon cation exchange capacity in the unpolluted and polluted samples without vegetation. Zinc decreased with increased clay and organic matter content. Results suggested that soils must be reclaimed quickly in order to prevent additional degradation. 48 refs., 5 tabs., 4 figs.

  18. Zinc availability in relation to selected soil properties in a crude oil polluted eutric tropofluvent

    Energy Technology Data Exchange (ETDEWEB)

    Chukwuma, M.C.; Eshett, E.T.; Onweremadu, E.U.; Okon, M.A. [Federal Univ. of Technology, Owerri (Nigeria). Dept. of Soil Science and Technology

    2010-04-01

    This study examined zinc availability in crude oil-polluted soils. The aim of the study was to determine the effect of zinc on the physiochemical properties of soils in relation to remediation activities. The study was located at a site in Nigeria where crude oil spillage had occurred over a period of 2 months. The region was characterized by quarternary, alluvium, meander belt, wooded back swamps as well as fresh water swamps and Sombreiro-Warri Deltaic plains with large deposits of petroleum and natural gas. Three different land units were studied, notably (1) unpolluted, (2) polluted without vegetation and (3) polluted with vegetation. Soil sampling was conducted using a transect method. Hydrometer analyses were conducted to determine particle size distribution, while a core method was used to determine bulk density. Soil pH, total carbon, phosphorus, and total nitrogen were also measured. An analysis of variance (ANOVA) was used to correlate and regress zinc availability against the selected soil properties. The study showed that zinc availability increased with increases in the value of the effective carbon cation exchange capacity in the unpolluted and polluted samples without vegetation. Zinc decreased with increased clay and organic matter content. Results suggested that soils must be reclaimed quickly in order to prevent additional degradation. 48 refs., 5 tabs., 4 figs.

  19. Antinociceptive action and redox properties of citronellal, an essential oil present in lemongrass.

    Science.gov (United States)

    Quintans-Júnior, Lucindo; da Rocha, Ricardo Fagundes; Caregnato, Fernanda Freitas; Moreira, José Claudio Fonseca; da Silva, Francilene Amaral; Araújo, Adriano Antunes de Souza; dos Santos, João Paulo Almeida; Melo, Mônica Santos; de Sousa, Damião Pergentino; Bonjardim, Leonardo Rigoldi; Gelain, Daniel Pens

    2011-06-01

    Citronellal (CT) is a monoterpenoid and the major constituent of the mixture of terpenoids that give the citronella oil its lemon scent. Citronella oil is widely used around the world for various purposes and is mainly obtained from plants of the Cymbopogon genus, which are known as "lemongrass." Considering these plants have been used worldwide for various medicinal purposes, the interest of researchers to understand the biological activities of monoterpenoids related to the Cymbopogon genus has been increasing. In the present work, we investigated the antinociceptive action and the redox properties of CT. Our results indicate that intraperitoneal injection of CT was effective in reducing nociceptive face-rubbing behavior in both phases of the formalin test, which was also naloxone-sensitive. CT also evoked antinociceptive response in the capsaicin and glutamate tests. The total radical-trapping antioxidant parameter and total antioxidant reactivity assays indicate that CT at doses of 0.1 and 1 mg/mL exerts a significant antioxidant activity, which is probably related to its ability to scavenge superoxide and nitric oxide, but not H(2)O(2) or hydroxyl radicals, as evaluated separately by specific in vitro tests. These results show for the first time the antinociceptive potential of CT and indicate that the antioxidant properties of this compound may rely on its mechanism of biological actions because CT-containing natural products are used to treat various diseases related to oxidative stress and reactive species.

  20. Physical, mechanical and barrier properties of corn starch films incorporated with plant essential oils.

    Science.gov (United States)

    Ghasemlou, Mehran; Aliheidari, Nahal; Fahmi, Ronak; Shojaee-Aliabadi, Saeedeh; Keshavarz, Behnam; Cran, Marlene J; Khaksar, Ramin

    2013-10-15

    Corn starch-based films are inherently brittle and lack the necessary mechanical integrity for conventional packaging. However, the incorporation of additives can potentially improve the mechanical properties and processability of starch films. In this work two essential oils, Zataria multiflora Boiss (ZEO) or Mentha pulegium (MEO) at three levels (1%, 2% and 3% (v/v)), were incorporated into starch films using a solution casting method to improve the mechanical and water vapor permeability (WVP) properties and to impart antimicrobial activity. Increasing the content of ZEO or MEO from 2% to 3% (v/v) increased values for elongation at break from 94.38% to 162.45% and from 53.34% to 107.71% respectively, but did not significantly change tensile strength values of the films. The WVP properties of the films decreased from 7.79 to 3.37 or 3.19 g mm m(-2) d(-1) kPa(-1) after 3% (v/v) ZEO or MEO incorporation respectively. The oxygen barrier properties were unaffected at the 1% and 2% (v/v) oil concentration used but oxygen transmission increased with 3% (v/v) for both formulations. The films' color became slightly yellow as the levels of ZEO or MEO were increased although transparency was maintained. Both films demonstrated antimicrobial activity with films containing ZEO more effective against Escherichia coli and Staphylococcus aureus than those containing MEO. These results suggest that ZEO and MEO have the potential to be directly incorporated into corn starch to prepare antimicrobial biodegradable films for various food packaging applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. [Experimental Methods and Result Analysis of a Variety of Spectral Reflectance Properties of the Thin Oil Film].

    Science.gov (United States)

    Ye, Zhou; Liu, Li; Wei, Chuan-xin; Gu, Qun; An, Ping-ao; Zhao, Yue-jiao; Yin, Da-yi

    2015-06-01

    In order to analysis the oil spill situation based on the obtained data in airborne aerial work, it's needed to get the spectral reflectance characteristics of the oil film of different oils and thickness as support and to select the appropriate operating band. An experiment is set up to measure the reflectance spectroscopy from ultraviolet to near-infrared for the film of five target samples, which means petrol, diesel, lubricating oil, kerosene and fossil, using spectral measurement device. The result is compared with the reflectance spectra of water in the same experimental environment, which shows that the spectral reflection characteristics of the oil film are related to the thickness and the type of the oil film. In case of the same thickness, the spectral reflectance curve of different types of film is far different, and for the same type of film, the spectral reflectance curve changes accordingly with the change of film thickness, therefore in terms of the single film, different film thickness can be distinguished by reflectance curves. It also shows that in terms of the same film thickness, the reflectance of diesel, kerosene, lubricants reaches peak around 380 nm wavelength, obviously different from the reflectance of water, and that the reflectance of crude oil is far less than that of water in more than 340 nm wavelength, and the obtained reflection spectrum can be used to distinguish between different types of oil film to some extent. The experiment covers main types of spilled oil, with data comprehensively covering commonly used detect spectral bands, and quantitative description of the spectral reflectance properties of film. It provides comprehensive theoretical and data support for the selection of airborne oil spill detection working band and the detection and analysis of water-surface oil spill.

  2. Properties and Antioxidant Capacity of Anchovy (Engraulis encrasicholus) By-Product Protein Films Containing Thyme Essential Oil.

    Science.gov (United States)

    Tural, Serpil; Turhan, Sadettin

    2017-03-01

    In this study, some properties and antioxidant capacity of anchovy ( Engraulis encrasicholus ) by-product protein films with added 0.5, 1.0 and 1.5% of thyme essential oil were investigated. The films with thyme essential oil had higher elongation at break, water vapour permeability and oxygen permeability, lower solubility and tensile strength than control film (p<0.05). The incorporation of thyme essential oil affected transparency values of the films, but only the addition of 1.5% of thyme essential oil significantly reduced the transparency (p<0.05). In the film matrix, molecular organisation and intermolecular interaction were changed by thyme essential oil addition. The films with thyme essential oil had a heterogeneous surface and a relatively smooth cross-section structure. Slightly higher phase transition and lower glass transition temperatures were observed in films with thyme essential oil. The antioxidant capacity of the films was improved by incorporating thyme essential oil depending on its volume fraction.

  3. Study on Fired Clay Bricks by Replacing Clay with Palm Oil Waste: Effects on Physical and Mechanical Properties

    Science.gov (United States)

    Kadir, A. A.; Sarani, N. A.; Abdullah, M. M. A. B.; Perju, M. C.; Sandu, A. V.

    2017-06-01

    Palm oil is one of the major agricultural industries in Malaysia. Due to the poor management system, the discarded palm oil waste has always been linked to the environment issues. During processing of palm oil, a considerable amount of solid waste by-products in the form of fibres, shells, empty fruit bunches and fly ashes are produce rapidly. Therefore, this study was conducted to incorporate 1%, 5% and 10% of palm oil waste into fired clay brick. Samples of brick were fired at 1050°C temperature with heating rates of 1°C/min. Manufactured bricks were tested with physical and mechanical properties including firing shrinkage, dry density, water absorption and compressive strength. The results demonstrated that the replacement of 1% up to 5% of palm oil waste had improved several properties, although, a decrease of performance in certain aspects has also been observed. As a result, palm oil waste can be utilized in an environmentally safe way into fired clay brick thus providing adequate properties of fired clay brick.

  4. Physicochemical and antimicrobial properties of copaiba oil: implications on product quality control.

    Science.gov (United States)

    Fonseca, Renata G; Barros, Francisco M; Apel, Miriam A; Poser, Gilsane L von; Andriolli, Jo O L; Filho, Pedro C Campos; Sousa, Dhierlate F; Lobo, Ivon P; Conceiç O, Aline O

    2015-01-01

    The copaiba oil is a common natural product used in cosmetic industry and as a nutraceutical product. However, lack of quality control and scarce knowledge about its antimicrobial activity is a point of concern. The proposal of this study was to investigate the physicochemical properties and the antimicrobial activity of five commercial brands of copaiba oil. Acidity and ester index, refractory index, solubility in alcohol, and thin layer chromatography were performed to verify the physicochemical properties of five commercial copaiba oils sold in local pharmacies. Ultra performance liquid chromatography coupled with diode-array detection and electrospray ionization quadrupole time-of-flight mass spectrometry (UPLC-DAD/ESI-Q-TOF-MS) was used to investigate diterpene acids while the volatile compounds were analysed by gas chromatography-mass spectrometry (GC-MS). Antibacterial and antifungal activities were also evaluated by agar diffusion technique; and minimal inhibitory concentration and maximal bactericidal concentration were defined for each sample and bacteria. The physical-chemical analysis revealed heterogeneity between all samples analysed. The A1 sample showed characteristics of copaiba oil and was mainly composed by hydrocarbon sesquiterpenes (29.95% β-bisabolene, 25.65% Z-α-bergamotene and 10.27% β-cariophyllene). Among diterpene acids, the UPLCDAD/ESI-Q-TOF-MS data are compatible with presence of copalic and/or kolavenic acid (m/z 305 [M + H]+). Candida albicans was sensitive to almost all samples at high concentration and Saccaromyces. Cerevisiae showed sensitivity to A1 sample at 100 mg/mL. Although variable, all samples showed antibacterial activity. Significant activity was seen for A3 (19.0 ±0 and 15.6 ±0.5 mm), A4 (16.6 ±0.5 and 15.6 ±0 mm), and A5 (17.1 ±0 and 17.1 ±0 mm) on Staphylococcus saprophyticus and S. aureus, respectively. All samples were active against Klebsiella pneumoniae showing ≥15 mm diameter halo inhibition; and only A

  5. The Logistics of Oil Spill Dispersant Application. Volume I. Logistics-Related Properties of Oil Spill Dispersants.

    Science.gov (United States)

    1982-11-01

    time of application. Such designs were probably influenced by the ready availabilit " 51 of fire-fighting hoses on ships and tugs; the water stream not...8217 I I1 ---- i . . .. . IIII . . . I I PREFACE The use of chemicals for the dispersal of oil spilled on water has been the subject of discussion (and of...20 Oil Type, Weathering and Emulsification.. 20 Slick Thickness .......................... 28 Water Temperature

  6. Fatty acid composition, physicochemical properties, antioxidant and cytotoxic activity of apple seed oil obtained from apple pomace.

    Science.gov (United States)

    Walia, Mayanka; Rawat, Kiran; Bhushan, Shashi; Padwad, Yogendra S; Singh, Bikram

    2014-03-30

    Apple pomace is generated in huge quantities in juice-processing industries the world over and continuous efforts are being made for its inclusive utilization. In this study, apple seeds separated from industrial pomace were used for extraction of oil. The fatty acid composition, physicochemical and antioxidant as well as in vitro anticancer properties of extracted oil were studied to assess its suitability in food and therapeutic applications. The fatty acid composition of seed oil revealed the dominance of oleic (46.50%) and linoleic acid (43.81%). It had high iodine (121.8 g I 100 g⁻¹) and saponification value (184.91 mg KOH g⁻¹ oil). The acid value, refractive index and relative density were 4.28 mg KOH g⁻¹, 1.47 and 0.97 mg mL⁻¹, respectively. The antioxidant potential (IC₅₀) of apple seed oil was 40.06 µg mL⁻¹. Cytotoxicity of apple seed oil against CHOK1, SiHa and A549 cancer cell lines ranged between 0.5 ± 0.06% and 88.6 ± 0.3%. The physicochemical properties of apple seed oil were comparable with edible food oil, indicating its better stability and broad application in the food and pharmaceutical industries. Apple seed oil could be a good source of natural antioxidants. Also, the in vitro cytotoxic activity against specific cell lines exhibited its potential as an anticancer agent. © 2013 Society of Chemical Industry.

  7. Evaluation of the sensory properties of a cosmetic formulation containing green coffee oil

    Directory of Open Access Journals (Sweden)

    Tais A. L. Wagemaker

    2013-06-01

    Full Text Available Green coffee oil (GCO is a well-known ingredient with cosmetic properties such as: maintaining skin hydration, improving the sun protection factor and maintaining the skin barrier function. Thus, the aim of this study was to evaluate the impact of the addition of a considerable amount of GCO (15% on the sensory properties of a cosmetic formulation. The sensory panel consisted of nineteen volunteers aged between 19 and 43 years old. Sensory attributes were assessed on a 25 cm2 defined region on the internal side of the forearm. The volunteers were instructed to evaluate the sensory properties that they felt each formulation demonstrated, immediately after application and then after a further 5 minutes. The formulations had almost the same perceived effect among the volunteers. The majority of volunteers noted their skin as soft and moisturized after application of the formulations. However, the perception of an oily residue on the skin was the main effect of the formulation containing GCO. Thus, we can conclude that the total amount of GCO used, revealed interesting properties for use in dry skin or night creams, since it was able to leave an oily film on skin.

  8. Synthesis and properties of cross-linked polymers from epoxidized rubber seed oil and triethylenetetramine

    NARCIS (Netherlands)

    Abduh, Muhammad Yusuf; Iqbal, Muhammad; Picchioni, Francesco; Manurung, Robert; Heeres, Hero J.

    2015-01-01

    A series of epoxidized oils were prepared from rubber seed, soybean, jatropha, palm, and coconut oils. The epoxy content varied from 0.03 to 7.4 wt %, in accordance with the degree of unsaturation of the oils (lowest for coconut, highest for rubber seed oil). Bulk polymerization/curing of the

  9. Properties of Residue from Olive Oil Extraction as a Raw Material for Sustainable Construction Materials. Part I: Physical Properties

    Directory of Open Access Journals (Sweden)

    Almudena Díaz-García

    2017-01-01

    Full Text Available Action on climate, the environment, and the efficient use of raw materials and resources are important challenges facing our society. Against this backdrop, the construction industry must adapt to new trends and environmentally sustainable construction systems, thus requiring lines of research aimed at keeping energy consumption in new buildings as low as possible. One of the main goals of this research is to efficiently contribute to reducing the amount of residue from olive oil extraction using a two-phase method. This can be achieved by producing alternative structural materials to be used in the construction industry by means of a circular economy. The technical feasibility of adding said residue to ceramic paste was proven by analyzing the changes produced in the physical properties of the paste, which were then compared to the properties of the reference materials manufactured with clay without residue. Results obtained show that the heating value of wet pomace can contribute to the thermal needs of the sintering process, contributing 30% of energy in pieces containing 3% of said material. Likewise, adding larger amounts of wet pomace to the clay body causes a significant decrease in bulk density values.

  10. Properties of Residue from Olive Oil Extraction as a Raw Material for Sustainable Construction Materials. Part I: Physical Properties.

    Science.gov (United States)

    Díaz-García, Almudena; Martínez-García, Carmen; Cotes-Palomino, Teresa

    2017-01-25

    Action on climate, the environment, and the efficient use of raw materials and resources are important challenges facing our society. Against this backdrop, the construction industry must adapt to new trends and environmentally sustainable construction systems, thus requiring lines of research aimed at keeping energy consumption in new buildings as low as possible. One of the main goals of this research is to efficiently contribute to reducing the amount of residue from olive oil extraction using a two-phase method. This can be achieved by producing alternative structural materials to be used in the construction industry by means of a circular economy. The technical feasibility of adding said residue to ceramic paste was proven by analyzing the changes produced in the physical properties of the paste, which were then compared to the properties of the reference materials manufactured with clay without residue. Results obtained show that the heating value of wet pomace can contribute to the thermal needs of the sintering process, contributing 30% of energy in pieces containing 3% of said material. Likewise, adding larger amounts of wet pomace to the clay body causes a significant decrease in bulk density values.

  11. Effect of Nano Al2O3 Doping on Thermal Aging Properties of Oil-Paper Insulation

    Directory of Open Access Journals (Sweden)

    Ningchuan Liang

    2018-05-01

    Full Text Available The thermal aging property of oil-paper insulation is a key factor affecting the service life of transformers. In this study, nano-Al2O3 was added to insulating paper to improve its anti-thermal aging property and delay the aging rate of the insulating oil. The composite paper containing 2% nano-Al2O3 had the highest tensile strength and therefore was selected for the thermal aging test. The composite and normal papers were treated with an accelerated thermal aging experiment at the temperature of 130 °C for 56 days. The variations of the degree of polymerization (DP and tensile strength of the insulating papers with aging time were obtained. The characteristics of the insulating oil, including color, acid content, breakdown voltage, and dielectric loss were analyzed. The results revealed that compared with a plain paper, the composite paper maintained a higher DP, and its tensile strength decreased more slowly during the aging process. The oil-impregnated composite paper presented a lighter-colored oil, less viscosity changes, and a considerably lower quantity of thermal aging products. In addition, nano-Al2O3 can effectively adsorb copper compounds and keep part of the acid products and water away from the thermal aging process. This characteristic restrained the catalysis of copper compounds and H+ in the thermal aging reaction and reduced the thermal aging speed of both the insulating paper and the insulating oil.

  12. 36 CFR 1211.425 - Counseling and use of appraisal and counseling materials.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Counseling and use of appraisal and counseling materials. 1211.425 Section 1211.425 Parks, Forests, and Public Property NATIONAL... Education Programs or Activities Prohibited § 1211.425 Counseling and use of appraisal and counseling...

  13. Tribological properties and lubrication mechanism of in situ graphene-nickel matrix composite impregnated with lubricating oil

    Science.gov (United States)

    Lei, Yu; Du, Jinfang; Pang, Xianjuan; Wang, Haizhong; Yang, Hua; Jiang, Jinlong

    2018-05-01

    A solid-liquid synergetic lubricating system has been designed to develop a novel self-lubricating nickel matrix composite. The graphene-nickel (G-Ni) matrix composite with porous structure was fabricated by in situ growing graphene in bulk nickel using a powder metallurgy method. The porous structures of the composite were used to store polyalphaolefin (PAO) oil for self-lubricating. It is found that the G-Ni matrix composite under oil lubrication condition exhibited superior tribological properties as compared to pure nickel and the composite under dry sliding condition. The prestored oil was released from pores to the sliding surface forming a lubricating oil film during friction process. This lubricating oil film can protect the worn surface from severe oxidation, and help the formation and transfer of a carbon-based solid tribofilm derived from graphene and lubricating oil. This solid (graphene)-liquid (oil) synergistic lubricating mechanism is responsible for the reduction of friction coefficient and improvement of wear resistance of the in situ fabricated G-Ni matrix composite.

  14. Microwave-assisted extraction of silkworm pupal oil and evaluation of its fatty acid composition, physicochemical properties and antioxidant activities.

    Science.gov (United States)

    Hu, Bin; Li, Cheng; Zhang, Zhiqing; Zhao, Qing; Zhu, Yadong; Su, Zhao; Chen, Yizi

    2017-09-15

    Microwave-assisted extraction (MAE) of oil from silkworm pupae was firstly performed in the present research. The response surface methodology was applied to optimize the parameters for MAE. The yield of oil by MAE was 30.16% under optimal conditions of a mixed solvent consisting of ethanol and n-hexane (1:1, v/v), microwave power (360W), liquid to solid ratio (7.5/1mL/g), microwave time (29min). Moreover, oil extracted by MAE was quantitatively (yield) and qualitatively (fatty acid profile) similar to those obtained using Soxhlet extraction (SE), but oil extracted by MAE exhibited favourable physicochemical properties and oxidation stability. Additionally, oil extracted by MAE had a higher content of total phenolic, and it showed stronger antioxidant activities. Scanning electron microscopy revealed that microwave technique efficiently promoted the release of oil by breaking down the cell structure of silkworm pupae. Therefore, MAE can be an effective method for the silkworm pupal oil extraction. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Effect of Processing on Physiochemical Properties and Fatty Acid Composition of Fluted Pumpkin (Telfairia occidentails) Seed Oil

    International Nuclear Information System (INIS)

    Alademeyin, J. O.; Arawande, J. O.

    2016-01-01

    This paper reports the physicochemical properties and fatty acid composition of the seed oil extracted from fluted pumpkin (Telfairia occidentalis). The extracted oil was degummed, neutralised and bleached. The oil yield was 42.26±0.20%. The specific gravity (at 25 degree C) of the oil was 0.923±0.003 and the refractive index (at 25 degree C) was 1.475±0.002. Processing of the crude oil resulted in progressive decrease in turbidity, colour, free fatty acid, acid value, peroxide value and saponification value. However, there was increase in smoke point (243.00±0.03 to 253.00±0.03 degree C), flash point (285.00±1.20 to 304.0 1.10 degree C) and fire point (345.001.10 to 358.0 1.55 degree C) as well as iodine value (113.00 to 121.50 g/100 g) and fatty acid composition during the processing of the oil. The fatty acids detected in the oil samples were myristic, palmitic, stearic, oleic, arachidic, behenic, linoleic and linolenic acids. The predominant fatty acid was oleic acid (47.40-47.90%) followed by linoleic acid (26.36-30.44%) while the least fatty acid was linolenic acid (0.01-0.05%). (author)

  16. Anti-Inflammatory Properties and Chemical Characterization of the Essential Oils of Four Citrus Species.

    Science.gov (United States)

    Amorim, Jorge Luis; Simas, Daniel Luiz Reis; Pinheiro, Mariana Martins Gomes; Moreno, Daniela Sales Alviano; Alviano, Celuta Sales; da Silva, Antonio Jorge Ribeiro; Fernandes, Patricia Dias

    2016-01-01

    Citrus fruits have potential health-promoting properties and their essential oils have long been used in several applications. Due to biological effects described to some citrus species in this study our objectives were to analyze and compare the phytochemical composition and evaluate the anti-inflammatory effect of essential oils (EO) obtained from four different Citrus species. Mice were treated with EO obtained from C. limon, C. latifolia, C. aurantifolia or C. limonia (10 to 100 mg/kg, p.o.) and their anti-inflammatory effects were evaluated in chemical induced inflammation (formalin-induced licking response) and carrageenan-induced inflammation in the subcutaneous air pouch model. A possible antinociceptive effect was evaluated in the hot plate model. Phytochemical analyses indicated the presence of geranial, limonene, γ-terpinene and others. EOs from C. limon, C. aurantifolia and C. limonia exhibited anti-inflammatory effects by reducing cell migration, cytokine production and protein extravasation induced by carrageenan. These effects were also obtained with similar amounts of pure limonene. It was also observed that C. aurantifolia induced myelotoxicity in mice. Anti-inflammatory effect of C. limon and C. limonia is probably due to their large quantities of limonene, while the myelotoxicity observed with C. aurantifolia is most likely due to the high concentration of citral. Our results indicate that these EOs from C. limon, C. aurantifolia and C. limonia have a significant anti-inflammatory effect; however, care should be taken with C. aurantifolia.

  17. Anti-Inflammatory Properties and Chemical Characterization of the Essential Oils of Four Citrus Species.

    Directory of Open Access Journals (Sweden)

    Jorge Luis Amorim

    Full Text Available Citrus fruits have potential health-promoting properties and their essential oils have long been used in several applications. Due to biological effects described to some citrus species in this study our objectives were to analyze and compare the phytochemical composition and evaluate the anti-inflammatory effect of essential oils (EO obtained from four different Citrus species. Mice were treated with EO obtained from C. limon, C. latifolia, C. aurantifolia or C. limonia (10 to 100 mg/kg, p.o. and their anti-inflammatory effects were evaluated in chemical induced inflammation (formalin-induced licking response and carrageenan-induced inflammation in the subcutaneous air pouch model. A possible antinociceptive effect was evaluated in the hot plate model. Phytochemical analyses indicated the presence of geranial, limonene, γ-terpinene and others. EOs from C. limon, C. aurantifolia and C. limonia exhibited anti-inflammatory effects by reducing cell migration, cytokine production and protein extravasation induced by carrageenan. These effects were also obtained with similar amounts of pure limonene. It was also observed that C. aurantifolia induced myelotoxicity in mice. Anti-inflammatory effect of C. limon and C. limonia is probably due to their large quantities of limonene, while the myelotoxicity observed with C. aurantifolia is most likely due to the high concentration of citral. Our results indicate that these EOs from C. limon, C. aurantifolia and C. limonia have a significant anti-inflammatory effect; however, care should be taken with C. aurantifolia.

  18. Biomedical properties and potentiality of Lippia microphylla Cham. and its essential oils

    Directory of Open Access Journals (Sweden)

    Evelyne Rolim Braun Sim and otilde;es

    2015-09-01

    Full Text Available Lippia microphylla Cham. (Verbanaceae is an endemic underexploited Brazilian vegetal. This work reviewed the biological potentialities of Lippia microphylla, emphasizing the properties of essential oils (EOs and analyzed scientific indicators about genus Lippia and L. microphylla. Databases from 1948 to the present were searched and a software (Vantage Point 7.1 associated with Derwent Innovation Index was used to identify the indicators of the genus Lippia, and biological activities and compounds in the L. macrophylla species. Ethnopharmacological records report use of L. microphylla leaves to treat gastrointestinal disorders, influenza, bronchitis, cough, nasal congestion and sinusitis during vaporization, whose aromatic volatile oils are rich in monoterpenes, especially cineole, terpineol and thymol. Other EOs have larvicidal activity on Aedes aegypti larvae, and antifungal, antibacterial and cytotoxic and antitumor action on human and murine cancer cells. Brazil is the country with more articles about Lippia species, but it deposited only 9 patents since 1993. Most of the publications about L. microphylla are concentrated in food and chemical sciences. This bioprospection helps to choice areas of interest for capital investment and to give support for Brazilian Institutions to establish cooperation and improve technological impact at the point of view of creation and innovation. [J Intercult Ethnopharmacol 2015; 4(3.000: 256-263

  19. Formation of the oil composition of the Yu0 Bazhenov formation, Salym oil field

    Directory of Open Access Journals (Sweden)

    E.V. Soboleva

    2017-05-01

    Full Text Available The Bazhenov horizon of Western Siberia has been studied in considerable detail from different perspectives and different methods, a large number of studies have been devoted to a wide range of issues related to the lithological composition of rocks, their reservoir properties, the study of organic matter, properties and composition of oil at various analytical levels, and many others. This work is devoted to restoring conditions for the formation of oil properties and composition of the Yu0 Salym oil field, based mainly on the geochemical aspects of the study of oil changes both in area and in the section within the productive layer of Salym structure, using some geological data, such as structural plan for the reflecting horizon B (the roof of the Bazhenov formation, having a complex configuration, reservoir temperatures and pressure, well flow rates, and others. There is no single reservoir at the Salym field in the Yu0 formation. For the conclusions of the geological-geochemical interpretation, a sampling of 61 samples of oil from exploration, appraisal and production wells of the initial stages of production was used, since in the future when oil is extracted, the ecology in the deposits changes, and 21 samples of oil from other fields in the West Siberian oil and gas basin. Conventionally, three types of oils are distinguished, differing in their physicochemical parameters, group hydrocarbon and molecular composition. It was suggested that in addition to the own organic matter of the Bazhenov formation, hydrocarbon fluids of the Vasyugan, Tyumen formations and possibly Paleozoic rocks were involved in the formation of the oil composition. The flow of light liquid hydrocarbons and gases occurred along the zones of faults of different genesis and duration of existence.

  20. A Comparative Study of the Physicochemical Properties of a Virgin Coconut Oil Emulsion and Commercial Food Supplement Emulsions

    Directory of Open Access Journals (Sweden)

    Yih Phing Khor

    2014-07-01

    Full Text Available Food manufacturers are interested in developing emulsion-based products into nutritional foods by using beneficial oils, such as fish oil and virgin coconut oil (VCO. In this study, the physicochemical properties of a VCO oil-in-water emulsion was investigated and compared to other commercial oil-in-water emulsion products (C1, C2, C3, and C4. C3 exhibited the smallest droplet size of 3.25 µm. The pH for the emulsion samples ranged from 2.52 to 4.38 and thus were categorised as acidic. In a texture analysis, C2 was described as the most firm, very adhesive and cohesive, as well as having high compressibility properties. From a rheological viewpoint, all the emulsion samples exhibited non-Newtonian behaviour, which manifested as a shear-thinning property. The G'G'' crossover illustrated by the VCO emulsion in the amplitude sweep graph but not the other commercial samples illustrated that the VCO emulsion had a better mouthfeel. In this context, the VCO emulsion yielded the highest zeta potential (64.86 mV, which was attributed to its strong repulsive forces, leading to a good dispersion system. C2 comprised the highest percentage of fat among all emulsion samples, followed by the VCO emulsion, with 18.44% and 6.59%, respectively.

  1. Review of Research Progress on the Electrical Properties and Modification of Mineral Insulating Oils Used in Power Transformers

    Directory of Open Access Journals (Sweden)

    Xiaobo Wang

    2018-02-01

    Full Text Available In November 2017, the first ±1100 kV high-voltage direct-current power transformer in the world, which was made by Siemens in Nurnberg, passed its type test. Meanwhile, in early 2017, a ±1000 kV ultra-high voltage (UHV substation was officially put into operation in Tianjin, China. These examples illustrate that the era of UHV power transmission is coming. With the rapid increase in power transmission voltage, the performance requirements for the insulation of power transformers are getting higher and higher. The traditional mineral oils used inside power transformers as insulating and cooling agents are thus facing a serious challenge to meet these requirements. In this review, the basic properties of traditional mineral insulating oil are first introduced. Then, the variation of electrical properties such as breakdown strength, permittivity, and conductivity during transformer operation and aging is summarized. Next, the modification of mineral insulating oil is investigated with a focus on the influence of nanoparticles on the electrical properties of nano-modified insulating oil. Recent studies on the performance of mineral oil at molecular and atomic levels by molecular dynamics simulations are then described. Finally, future research hotspots and notable research topics are discussed.

  2. Recovery potential of cold press byproducts obtained from the edible oil industry: physicochemical, bioactive, and antimicrobial properties.

    Science.gov (United States)

    Karaman, Safa; Karasu, Salih; Tornuk, Fatih; Toker, Omer Said; Geçgel, Ümit; Sagdic, Osman; Ozcan, Nihat; Gül, Osman

    2015-03-04

    Physicochemical, bioactive, and antimicrobial properties of different cold press edible oil byproducts (almond (AOB), walnut (WOB), pomegranate (POB), and grape (GOB)) were investigated. Oil, protein, and crude fiber content of the byproducts were found between 4.82 and 12.57%, between 9.38 and 49.05%, and between 5.87 and 45.83%, respectively. GOB had very high crude fiber content; therefore, it may have potential for use as a new dietary fiber source in the food industry. As GOB, POB, and WOB oils were rich in polyunsaturated fatty acids, AOB was rich in monounsaturated fatty acids. Oil byproducts were also found to be rich in dietary mineral contents, especially potassium, calcium, phosphorus, and magnesium. WOB had highest total phenolic (802 ppm), flavonoid (216 ppm), and total hydrolyzed tannin (2185 ppm) contents among the other byproducts. Volatile compounds of all the byproducts are mainly composed of terpenes in concentration of approximately 95%. Limonene was the dominant volatile compound in all of the byproducts. Almond and pomegranate byproduct extracts showed antibacterial activity depending on their concentration, whereas those of walnut and grape byproducts showed no antibacterial activity against any pathogenic bacteria tested. According to the results of the present study, walnut, almond, pomegranate, and grape seed oil byproducts possess valuable properties that can be taken into consideration for improvement of nutritional and functional properties of many food products.

  3. Essential oil of the leaves of Eugenia uniflora L.: antioxidant and antimicrobial properties.

    Science.gov (United States)

    Victoria, Francine Novack; Lenardão, Eder João; Savegnago, Lucielli; Perin, Gelson; Jacob, Raquel Guimarães; Alves, Diego; da Silva, Wladimir Padilha; da Motta, Amanda de Souza; Nascente, Patricia da Silva

    2012-08-01

    Essential oil (EO) of the leaves of Eugenia uniflora L. (Brazilian cherry tree) was evaluated for its antioxidant, antibacterial and antifungal properties. The acute toxicity of the EO administered by oral route was also evaluated in mice. The EO exhibited antioxidant activity in the DPPH, ABTS and FRAP assays and reduced lipid peroxidation in the kidney of mice. The EO also showed antimicrobial activity against two important pathogenic bacteria, Staphylococcus aureus and Listeria monocytogenes, and against two fungi of the Candida species, C. lipolytica and C. guilliermondii. Acute administration of the EO by the oral route did not cause lethality or toxicological effects in mice. These findings suggest that the EO of the leaves of E. uniflora may have the potential for use in the pharmaceutical industry. Copyright © 2012 Elsevier Ltd. All rights reserved.

  4. Porosity and adsorption properties of activated carbon derived from palm oil waste

    International Nuclear Information System (INIS)

    Che Seman Mahmood; Nor Hayati Alias; Choo Thye Foo; Megat Harun Al-Rashid Megat Ahmad

    2004-01-01

    Activated carbon have extensively been used as adsorbents in industry for the removal of pollutant species from gases for the purpose of purification and recovery of chemicals. The adsorption properties of the carbons depend very much on the porosity and type of pore presents which can be generated and controlled during synthesis and activation steps. This paper reports the effect of chemical activation by ZnCl 3 , KOH and nh 4 OH on the porosity of carbon produced from palm oil industry waste. Type of pores will further be validated by the SEM micrograph. The amount of gas adsorbed, the adsorption capacities can also be estimated based on the BET experiments data. The applicability of the produced carbon materials for the removal and exchange of hazardous incinerator gas is discussed. (Author)

  5. Effect of γ-ray irradiation on properties of castor oil-polyurethane potting materials

    International Nuclear Information System (INIS)

    Guan Jian; Luo Xianglin; Yue Yilun

    2001-01-01

    After γ-ray sterilization, the amounts of 4,4'-methylenedianiline (MDA) in the five kinds of synthesized medical castor oil-polyurethane potting materials were detected by HPLC. The influences of γ-ray irradiation on the mechanical performance of the potting materials were also discussed quantitatively.The experimental results show that the amounts of produced MDA increases with γ-ray irradiation dosage. After 25 kGy γ-ray sterilization, the accumulated amounts of MDA in the five kinds of potting materials were 10.33, 10.37, 10.52, 10.59, 10.91 ? μg/g respectively. Those amounts are below the level of harm amount to human body. At the same time, the mechanical properties of the potting materials such as tensile strength, tear strength and hardness are improved because cross-linking happens under irradiation

  6. Surface tension and wetting properties of rapeseed oil to biofuel conversion by-products

    Science.gov (United States)

    Muszyński, Siemowit; Sujak, Agnieszka; Stępniewski, Andrzej; Kornarzyński, Krzysztof; Ejtel, Marta; Kowal, Natalia; Tomczyk-Warunek, Agnieszka; Szcześniak, Emil; Tomczyńska-Mleko, Marta; Mleko, Stanisław

    2018-04-01

    This work presents a study on the surface tension, density and wetting behaviour of distilled glycerol, technical grade glycerol and the matter organic non-glycerin fraction. The research was conducted to expand the knowledge about the physical properties of wastes from the rapeseed oil biofuel production. The results show that the densities of technical grade glycerol (1.300 g cm-3) and distilled glycerol (1.267 g cm-3) did not differ and were significantly lower than the density of the matter organic non-glycerin fraction (1.579 g cm-3). Furthermore, the surface tension of distilled glycerol (49.6 mN m-1) was significantly higher than the matter organic non-glycerin fraction (32.7 mN m-1) and technical grade glycerol (29.5 mN m-1). As a result, both technical grade glycerol and the matter organic non-glycerin fraction had lower contact angles than distilled glycerol. The examined physical properties of distilled glycerol were found to be very close to that of the commercially available pure glycerol. The results suggest that technical grade glycerol may have potential application in the production of glycerol/fuel blends or biosurfactants. The presented results indicate that surface tension measurements are more useful when examining the quality of biofuel wastes than is density determination, as they allow for a more accurate analysis of the effects of impurities on the physical properties of the biofuel by-products.

  7. Preliminary Investigation of Acoustical Properties of Concrete Containing Oil Palm Shell as an Aggregate Replacement

    Science.gov (United States)

    Zanariah, J.; Zaiton, H.; Musli Nizam, Y.; Khairulzan, Y.; Dianah, M.; Nadirah, D.; Hanifi, O. Mohd

    2018-03-01

    Research has been so far focused extensively on mechanical properties of oil palm shell (OPS) concrete but less on sound properties. Thus, the objective of this study is to investigate whether concrete containing OPS can be applied in the field of road noise barrier. The acoustic properties of the samples were determined by using an impedance tube connected to a sound source. The noise reduction coefficient (NRC) and weighted sound absorption coefficient (αw) which is more commonly use in the road traffic noise barrier field were calculated according to BS EN ISO 11654:1997. Compressive strengths of samples were also determined by using compressive test. The results presented that the compressive strength of the OPS composites decreased as increased in w/c wit minimum of 20.44 N/mm2 at 28 days for w/c = 0.6 but still satisfactory for structural use. The sound absorption coefficient demonstrated that they were decreased as the w/c are higher with typical curve of two peaks at 315Hz and 1000Hz. All samples were then can be classified as class E as 0.5< αw < 0.25 and should be classified as L due to favourable deviation higher than 0.25 for 250 Hz.

  8. Physicochemical and Antioxidant Properties of Rice Bran Oils Produced from Colored Rice Using Different Extraction Methods.

    Science.gov (United States)

    Mingyai, Sukanya; Kettawan, Aikkarach; Srikaeo, Khongsak; Singanusong, Riantong

    2017-06-01

    This study investigated the physicochemical and antioxidant properties of rice bran oil (RBO) produced from the bran of three rice varities; Khao Dawk Mali 105 (white rice), Red Jasmine rice (red rice) and Hom-nin rice (black rice) using three extraction methods including cold-press extraction (CPE), solvent extraction (SE) and supercritical CO 2 extraction (SC-CO 2 ). Yields, color, acid value (AV), free fatty acid (FFA), peroxide value (PV), iodine value (IV), total phenolic compound (TPC), γ-oryzanol, α-tocopherol and fatty acid profile were analyzed. It was found that the yields obtained from SE, SC-CO 2 and CPE extractions were 17.35-20.19%, 14.76-18.16% and 3.22-6.22%, respectively. The RBO from the bran of red and black rice samples exhibited high antioxidant activities. They also contained higher amount of γ-oryzanol and α-tocopherol than those of white rice sample. In terms of extraction methods, SC-CO 2 provided better qualities of RBO as evidenced by their physicochemical and antioxidant properties. This study found that RBO produced from the bran of black rice samples using SC-CO 2 extraction method showed the best physicochemical and antioxidant properties.

  9. Effect of different sizes of palm oil fuel ash (POFA) towards physical properties of modified bitumen

    Science.gov (United States)

    Raja Zulkefli, R. N. A.; Yaacob, H.; Putra Jaya, R.; Warid, M. N. M.; Hassan, N.; Hainin, M. R.; Idham, M. K.

    2018-04-01

    In the past decades, numerous numbers of studies have been carried out to find ways enhancing properties of bitumen. Other than using polymer, agricultural waste such as palm oil fuel ash (POFA) is one of the waste products that can be used to modify bitumen. In this study, the physical and rheological properties of POFA modified bitumen were examined based on different grinding hour and different percentage of POFA. The bitumen were mixed with different percentages of POFA (0, 5 and 7%) which passed through 0.075 mm sieve and grinded at different period (1 and 4 hour). The samples were then tested and compared to conventional bitumen. From TEM results, POFA grinded at 1 hour have sizes between 3-7 µm while POFA grinded for 4 hours have finer sizes between 500 nm to 3 µm. The results showed that fineness of POFA affect properties of bitumen significantly. Decreasing in penetration value and decreasing in softening temperature indicates that the modified bitumen becomes harder than conventional bitumen. Modified bitumen gives best results when added with 7% POFA sizes of 500 nm to 3 µm compared to 3 to 7 µm.

  10. Physicochemical and Antioxidant Properties of Chitosan Films Incorporated with Cinnamon Oil

    Directory of Open Access Journals (Sweden)

    Marco A. López-Mata

    2015-01-01

    Full Text Available Chitosan films (CF with cinnamon bark oil (CO incorporated at 0% (control, 0.25%, 0.5%, and 1.0% v/v were prepared by an emulsion method. The films were characterized based on their physical properties (solubility, water vapor permeability, optical property, and microstructure and antioxidant properties (DPPH, ABTS, and its protective effects on human erythrocytes. The results showed that the incorporation of 0.5 and 1.0% of CO into the CF significantly decreased its solubility to 22% of the control (p<0.05. The water vapor permeability of the CF-CO was significantly reduced to 40% with low concentrations of CO (0.25% incorporated into the CF. In general, the films presented a yellow coloration and an increase in transparency with the incorporation of CO into the CF. It was also observed that the incorporation of CO increased the antioxidant activity between 6.0-fold and 14.5-fold compared to the control, and the protective capacity against erythrocyte hemolysis increased by as much as 80%.

  11. Effect of epoxidised soybean oil loading as plasticiser on physical, mechanical and thermal properties of polyvinylchloride

    Science.gov (United States)

    Rahmah, M.; Nurazzi, N. Mohd; Farah Nordyana, A. R.; Syed Anas, S. M.

    2017-07-01

    The aim of this paper is to study the effect of epoxidised soybean oil (ESO) as an alternative plasticizer on physical, mechanical and thermal properties of plasticised polyvinyl chloride (PPVC). Samples were prepared using 10, 20, 30 and 40% by weight percent of ESO. The samples were characterized for density, water absorption, tensile, hardness and thermal properties. The addition of ESO as plasticizer in PVC had caused significant effect on the physical and mechanical properties of PPVC. Increasing of ESO loading had resulted in decreased density, tensile strength, tensile modulus but increased in elongation at break and shore hardness. From water absorption study, it was observed that the all the samples reached the plateau absorption at days 8 to 10 with absorption percentages of between 1.8 to 2%. In general the crystallinity of PPVC maintained between 10 to 13% with increase in ESO loading while the melting point ( Tm) is slightly decreased about 3 to 6°C. In this study, ESO which acts as plasticiser were found to result in lower glass transition temperature (Tg). The enhancements of super cooling with higher ESO loading were found to increase the crystallization temperature, promoting crystallisation and act as nucleating agent.

  12. 32 CFR 644.44 - Fee appraisals.

    Science.gov (United States)

    2010-07-01

    ... HANDBOOK Appraisal § 644.44 Fee appraisals. (a) Definitions and procedures. (1) The complete and.... The keynote of this approach lies in the sound development of a proper rate. The appraiser must have a...

  13. Production and comparative fuel properties of biodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandra

    International Nuclear Information System (INIS)

    Ong, H.C.; Silitonga, A.S.; Masjuki, H.H.; Mahlia, T.M.I.; Chong, W.T.; Boosroh, M.H.

    2013-01-01

    Highlights: • Biodiesel is an effective way to overcome environmental issue by diesel fuel. • Two stage acid (H 2 SO 4 ) and base (NaOH) catalyst transesterification process ware carried out to produce methyl ester. • Properties of produced jatropha, sterculia and ceiba methyl ester are within the ASTM D6751 standard. • The methyl ester content was 96.75%, 97.50% and 97.72% for JCME, SFME and CPME respectively. - Abstract: Biodiesel production from non-edible vegetable oil is one of the effective ways to overcome the problems associated with energy crisis and environmental issues. The non-edible oils represent potential sources for future energy supply. In this study, the physical and chemical properties of crude Jatropha curcas oil (CJCO), crude Sterculia foetida oil (CSFO) and crude Ceiba pentandra oil (CCPO) and its methyl ester have been studied. The acid values of three oils were found to be 12.78 mg KOH per g, 5.11 mg KOH per g and 11.99 mg KOH per g which required acid-esterification and alkali-transesterification process. Acid value was decreased by esterification process using sulfuric acid anhydrous (H 2 SO 4 ) as a catalyst and alkaline (NaOH) catalyst transesterification was carried out for the conversion of crude oil to methyl esters. The optimal conditions of FAME yield achieved for those three biodiesel were 96.75%, 97.50% and 97.72% respectively. Furthermore, the fuel properties of J. curcas methyl ester (JCME), S. foetida methyl ester (SFME) and C. pentandra methyl ester (CPME) were determined and evaluated. As a result, those produced biodiesel matched and fulfilled ASTM 6751 and EN 14214 biodiesel standards. Based on the results, JCME, SFME and CPME are potential non-edible feedstock for biodiesel production

  14. The in-vitro evaluation of antibacterial, antifungal and cytotoxic properties of Marrubium vulgare L. essential oil grown in Tunisia

    Directory of Open Access Journals (Sweden)

    Mejdoub Hafedh

    2011-09-01

    Full Text Available Abstract Background In order to validate its antiseptic and anticancer properties with respect to traditional uses, we have screened for the first time the antimicrobial activity of aerial parts of M. vulgare L. essential oil against different pathogenic microorganisms and the cytotoxic activity against HeLa cell lines. Methods The agar disk diffusion method was used to study the antibacterial activity of M. vulgare essential oil against 12 bacterial and 4 fungi strains. The disc diameters of zone of inhibition (DD, the minimum inhibitory concentrations (MIC and the concentration inhibiting 50% (IC50 were investigated to characterize the antimicrobial activities of this essential oil. The in vitro cytotoxicity of M. vulgare essential oil was examined using a modified MTT assay; the viability and the IC50 were used to evaluate this test. Results The antimicrobial activity of the essential oil was investigated in order to evaluate its efficacy against the different tested microorganisms. The present results results showed a significant activity against microorganisms especially Gram (+ bacteria with inhibition zones and minimal inhibitory concentration values in the range of 6.6-25.2 mm and 1120-2600 μg/ml, respectively, whereas Gram (- bacteria exhibited a higher resistance. As far as the antifungal activity, among four strains tested, Botrytis cinerea exhibited the strongest activity with inhibition zones of 12.6 mm. However, Fusarium solani, Penicillium digitatum and Aspergillus niger were less sensitive to M. vulgare essential oil. About the citotoxicity assay, this finding indicate the capability of this essential oil to inhibited the proliferation of HeLa cell lines under some conditions with IC50 value of 0.258 μg/ml. Conclusion This investigation showed that the M. vulgare essential oil has a potent antimicrobial activity against some Gram (+ pathogenic bacteria and Botrytis cinerea fungi. The present studies confirm the use of this

  15. Chemical composition, antimicrobial properties and toxicity evaluation of the essential oil of Cupressus lusitanica Mill. leaves from Cameroon.

    Science.gov (United States)

    Teke, Gerald Ngo; Elisée, Kemadjou Nana; Roger, Kuiate Jules

    2013-06-13

    The leaves of Cupressus lusitanica Mill. are used in the western highlands of Cameroon for their medicinal property. The leaves of this species were collected in the West Region of Cameroon in August 2010 and subjected to hydrodistillation to obtain the essential oil. The oil was fractionated using adsorption column chromatography. The chemical composition of this oil and its fractions was analysed by gas chromatography-mass spectrometry (GC-MS). The essential oil and fractions were tested for antimicrobial activity against eight bacterial species and six species of Candida by the agar diffusion method. Macrodilution method was used to determine the minimum inhibition concentrations (MICs) and minimum bactericidal and/or fungicidal concentrations (MBCs and MFCs). The toxicity profile of the oil was studied using Swiss mice and Wistar albino rats. Forty-nine compounds were identified in the essential oil. The main components were germacrene D (18.5%), epi-zonarene (8.2%), cis-calamenene (8.2%), terpinen-4-ol (6.3%), linalool (6.0%) and umbellulone (6.0%). Enterococcus faecalis, Proteus mirabilis and Candida albicans were most susceptible to the oil (MICs of 1.25 and 0.16% for bacteria and fungi respectively). The estimated oral LD50 was 6.33 g/kg. There was an increase in sera ALT and AST activities while the blood cells and protein levels decreased in treated animals. The results obtained from this study support the ethnomedicinal use of C. lusitanica leaf oil in the treatment of whooping cough and skin infections though it should be used with care. This plant oil could be useful in the standardisation of phytomedicine.

  16. Fresh and mechanical properties of self-compacting concrete with coarse aggregate replacement using Waste of Oil Palm Shell

    Science.gov (United States)

    Prayuda, Hakas; Saleh, Fadillawaty; Ilham Maulana, Taufiq; Monika, Fanny

    2018-05-01

    Self-compacting Concrete (SCC) is a real innovation that can solidify itself without the help of tools to ease field practice. In its implementation, SCC can use alternative materials to reduce waste, such as Oil Palm Shell (OPS). In this research, OPS used as a replacement of crushed stone as the main coarse aggregate. The concrete mixture used consists of cement, sand, crushed stone, OPS as a variation of aggregate substitutes, palm oil fuel ash, and superplasticizer. OPS used were variated with 0%, 5%, 10%, 25% and 50% of crushed stone aggregate weight with age up to 28 days. Tests were conducted on fresh and mechanical properties. From the results, it is known that replacement of aggregate using OPS meets fresh properties criteria and although the compressive strength of OPS concrete mixture is lower than normal SCC, OPS still can be an alternative in making SCC and reducing palm oil industrial waste.

  17. Methodologies, solutions, and lessons learned from heavy oil well testing with an ESP, offshore UK in the Bentley field, block 9/3b

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, Barny; Lucas-Clements, Charles; Kew, Steve [Xcite Energy Resources (United Kingdom); Shumakov, Yakov; Camilleri, Lawrence; Akuanyionwu, Obinna; Tonoglu, Ahmet [Schlumberger (United Kingdom)

    2011-07-01

    Over the past decade, there has been an increase in hydrocarbon demand that led to the production of heavy oil fields in the United Kingdom continental shelf (UKCS). Most of the activity has been confined to exploration and appraisal drilling, the reason being the high uncertainty of the reservoir and fluid properties. Due to the operational complexity inherent to heavy oil, the use of conventional appraisal-well testing technology is limited. A novel technique developed to determine the most appropriate technology for testing wells with heavy oil using an electrical submersible pump (ESP) is presented in this paper. This technique was applied in the Bentley field. Some of the technical challenges include, maintaining fluid mobility using a surface-testing equipment, obtaining accurate flow measurements, a short weather window, and oil and gas separation for metering. Combining technologies such as dual-energy gamma ray venturi multiphase flowmeter, realtime monitoring, and ESP completion made it possible to execute the well test.

  18. Chemical composition of essential oil and antimicrobial properties of Chrysantemum coronarium (Asteraceae

    Directory of Open Access Journals (Sweden)

    I. V. Ivashchenko

    2017-03-01

    Full Text Available Garland chrysanthemum (Chrysanthemum coronarium L., or edible chrysanthemum, is a valuable food, medicinal, decorative plant, containing a considerable amount of biologically active substances. The herb is widely used as a dietary food in South-East Asia, whereas in spite of being spread throughout Ukraine, it is known there rather as a decorative than a vegetable plant. Introductory studies of C. coronarium were conducted on experimental plots at the Botanical Gardens of Zhytomyr National Agroecological University, which is located in Ukrainian Polesia. Chromatographic analysis of the essential oil composition was performed on the gas-liquid chromatographer Agilent Technologies 6890 with mass spectrometric detector 5973. The material for chromatographic studies was represented by C. coronarium inflorescences. The antimicrobial properties of the ethanolic extract from the areal parts of C. coronarium were studied on test-cultures, collected from the Ukrainian Collection of Microorganisms (UCM, Institute of Microbiology and Virology of NAS Ukraine, the test-cultures being: Escherichia coli UCM B-906 (ATCC 25922, Staphilococcus aureus UCM B-904 (ATCC 25923, Pseudomonas aeruginosa UCM B-900 (ATCC 9027, Candida albicans UCM Y-1918 (ATCC 885-653. The antimicrobial effect of the investigated substances was studied by the method of serial successive dilutions which determined minimal inhibitory concentration (MIC and minimal bactericidal concentration (MBC. This article shows the results of chromatographic analysis of essential oil obtained from C. coronarium inflorescences and focuses on antimicrobial activity of the herb against the test cultures of the following microorganisms: E. coli, S. aureus, P. aeruginosa, C. albicans. In the essential oil 26 compounds have been determined, 23 of which have been identified, the major components being: chrysanthemyl acetate (24.4%, chrysanthemol (21.8%, chrysanthenyl acetate (7.6%, camphor (7.3%,

  19. An appraisal profile of nostalgia.

    Science.gov (United States)

    van Tilburg, Wijnand A P; Bruder, Martin; Wildschut, Tim; Sedikides, Constantine; Göritz, Anja S

    2018-03-05

    The authors aimed to (a) identify the cognitive appraisals underlying nostalgia and (b) compare nostalgia with other emotions in terms of its appraisal profile. In Study 1, participants (N = 1,125) generated narratives. Next, they reported the level of nostalgia and 31 other emotions that these narratives elicited. Subsequently, participants evaluated the narrative events on several cognitive appraisals. Events that elicited nostalgia were pleasant, involved an irretrievable loss, felt psychologically distant, and were unique-an appraisal profile that differed from all other emotions. In Study 2 (N = 1,261), the authors experimentally varied these appraisals in a vignette paradigm and measured anticipated nostalgia and 10 other emotions. Participants anticipated most nostalgia when events were pleasant, involved irretrievable loss, were distant, and were unique-a profile shared only with longing. In Study 3 (N = 994), the authors used a guided autobiographical recall procedure in which they manipulated appraisals and measured the resultant emotions. Corroborating Studies 1-2, nostalgia was most intense for events that were pleasant, irretrievably lost, temporally distant, and unique. This appraisal profile was not shared by other emotions. The findings delineate the distinguishing cognitive appraisal profile of nostalgia. Nostalgia occupies a special place in the pantheon of emotions. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Current practices in economic appraisal

    NARCIS (Netherlands)

    Mossink, J.C.M.

    2000-01-01

    By means of economic appraisal, the costs and the benefits of health, environment and safety management can be made clear, both at the national level and at the company level. As such it is a tool in advocating good practices. This paper explores the possibilities of economic appraisal for policy

  1. Are there individual and sibling differences in appraisals of interparental conflict?

    Science.gov (United States)

    Lucas-Thompson, Rachel G; George, Melissa W

    2017-10-01

    Despite decades of empirical literature documenting the harmful effects of frequent, intense, violent, and unresolved interparental conflict on children's adjustment, there is considerable variability in the extent to which marital conflict contributes to the development of children's emotional and behavioral problems. Past research has documented links between properties of interparental conflict itself (e.g., intensity, frequency), children's appraisals of conflict, and children's outcomes, yet less is known about the role of individual and family characteristics in predicting children's conflict appraisals. Sibling studies may be especially helpful in understanding these individual differences yet are notably lacking in marital conflict research. The current study examines individual- and family-characteristic predictors of adolescents' appraisals of conflict in a study of 153 adolescents as well as sibling similarities in conflict appraisals in a subsample of 50 pairs of siblings. Controlling for parent reports of the frequency, intensity, and resolution of interparental conflict, parent-child relationship quality and stressful life events predicted conflict appraisals. In addition, there was nonindependence of sibling appraisals of conflict properties, but self-blame and threat appraisals appeared independent across siblings. Greater discrepancies in siblings' conflict appraisals were related to more negative marital conflict and discrepancies in parent-child relationship quality, and were found in mixed-sex sibling dyads. Implications for future studies on factors that impact children's appraisals of conflict and in particular making use of sibling studies to examine shared environmental and individual influences on appraisals is highlighted. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  2. Heat transfer property of refrigerant-oil mixture in a flooded evaporator: The role of bubble formation and oil retention

    International Nuclear Information System (INIS)

    Koo, Kyoung-Min; Kim, Sung-Gyu; Jeong, Young-Man; Lee, Jae-Keun; Kim, Soo Hyung; Lee, Soowon; Park, Nae-Hyun; Na, Byung-Chul; Hwang, Yoon-Jae; Kim, Byung-Soon; Hwang, Joon-Hyun

    2013-01-01

    We examined the effect of oil retention on the heat transfer performance of a shell-and-tube-type evaporator which had 26 inner tubes and was filled with the refrigerant R-134a. The refrigerant was boiled on the surface of the inner tubes in the evaporator, while chilled water circulated through these tubes. An experimental apparatus was designed to measure both the pressure and temperature profiles at the inlet and outlet of the flooded evaporator. Four windows were installed for observing the operation of the flooded evaporator. A series of experiments were carried out under the following conditions: the refrigerant saturation temperature, 5 .deg. C; refrigerant inlet quality, 0.1; heat fluxes from water to the refrigerant, 5-7 kW/m"2.. The concentration of the oil retained in the refrigerant was then varied up to approximately 10% to observe the effect on the heat transfer performance of the flooded evaporator. Increasing the oil content (i.e., increasing the concentration up to a maximum of approximately 10%) in the refrigerant R134a did not lead to any appreciable reduction in the overall heat transfer coefficient of a flooded evaporator with multiple-inner-tubes. When the oil concentration in the refrigerant was approximately 10%, the heat transfer degradation in the case of the flooded evaporator with multiple-inner-tubes was approximately 11%, which was found to be much smaller than the heat transfer degradation in the case of a flooded evaporator with a single-tube (26-49%). This observation suggested that the oil retained in the refrigerant did not significantly deteriorate the heat transfer performance of the flooded evaporator, presumably because the presence of tube bundles promoted forced convection by agitating bubbles

  3. Appraisal of the Fischer-DiPasquale-Wheaton (FDW real estate model and development of an integrated property and asset market model

    Directory of Open Access Journals (Sweden)

    H Du Toit

    2004-04-01

    Full Text Available This paper provides a concise overview of the development of an integrated property and asset market model (IPAMM for South African property markets, utilising the Pretoria office market as case study. The IPAMM simulates the interrelationships between property and asset markets in a diagrammatic quadrant model configuration. The Fischer-DiPasquale-Wheaton (FDW real estate model, arguably the most advanced diagrammatic quadrant real estate model available at present, served as basis for the development of IPAMM. IPAMM is essentially a regression model based on a system of stochastic equations that captures the interrelationships between property and asset markets. The model advances beyond mere conceptualisation of these relationships to a quantified interpretation and application of the theoretical premises that represent the micro-foundations of economic behaviour in property and asset markets.

  4. Thermic and thermodynamic properties of desorption process of essential oil of Hyssopus seravshanicus from bentonite clays

    International Nuclear Information System (INIS)

    Kukaniev, M.A.; Badalov, A.B.; Sharopov, F.S.

    2004-01-01

    It shown, that desorption process of essential oil of Hyssopus seravshanicus from bentonite clays include by four parts (lines) and the nature between essential oil of Hyssopus seravshanicus from bentonite clays is physical and chemical sorption

  5. Preparation and research on properties of castor oil as a diesel fuel additive

    OpenAIRE

    Nurbakhit Imankulov

    2012-01-01

    The research shows an opportunity of preparing biodiesel fuel on the basis of local diesel fuel and the bioadditive - castor oil. Limiting optimum concentration of introduction of the bioadditive equal was established as 5% mass ratio. The castor oil released from seeds of Palma Christi grown on experimental field. All physical and chemical characteristics of the oil including IR-spectra were determined. Operating conditions of castor oil introduction (temperature, solubility, concentra-tion,...

  6. Essential oils from wild populations of Algerian Lavandula stoechas L.: composition, chemical variability, and in vitro biological properties.

    Science.gov (United States)

    Benabdelkader, Tarek; Zitouni, Abdelghani; Guitton, Yann; Jullien, Frédéric; Maitre, Dany; Casabianca, Hervé; Legendre, Laurent; Kameli, Abdelkrim

    2011-05-01

    In an effort to develop local productions of aromatic and medicinal plants, a comprehensive assessment of the composition and biological activities of the essential oils (EOs) extracted from the aerial flowering parts of wild growing Lavandula stoechas L. collected from eleven different locations in northern Algeria was performed. The oils were characterized by GC-FID and GC/MS analyses, and 121 compounds were identified, accounting for 69.88-91.2% of the total oil compositions. The eleven oils greatly differed in their compositions, since only 66 compounds were common to all oils. Major EO components were fenchone (2; 11.27-37.48%), camphor (3, 1.94-21.8%), 1,8-cineole (1; 0.16-8.71%), and viridiflorol (10; 2.89-7.38%). The assessed in vitro biological properties demonstrated that the DPPH-based radical-scavenging activities and the inhibition of the β-carotene/linoleic acid-based lipid oxidation differed by an eight-fold factor between the most and the least active oils and were linked to different sets of molecules in the different EOs. The eleven EOs exhibited good antimicrobial activities against most of the 16 tested strains of bacteria, filamentous fungi, and yeasts, with minimum inhibitory concentrations (MICs) ranging from 0.16 to 11.90 mg/ml. Copyright © 2011 Verlag Helvetica Chimica Acta AG, Zürich.

  7. Effect of pre-emulsified sesame oil on physical-chemical and rheological properties of pork batters

    Directory of Open Access Journals (Sweden)

    Zhuang Li KANG

    Full Text Available Abstract Physical-chemical and rheological properties of pork batters as affected by replacing pork back-fat with pre-emulsified sesame oil were investigated. Replacement of pork back-fat with pre-emulsified sesame oil, improved L* value, moisture and protein content, hardness, cohesiveness, and chewiness, declined a* value, fat content and energy, but not affect cooking yield. When used pre-emulsified sesame oil to replace pork back-fat 50%, the sample had the highest L* value and texture. According to the results of dynamic rheological, replaced pork back-fat by pre-emulsified sesame oil increased the storage modulus (G' values at 80 °C, and formed firm gel. The result of Low-field nuclear magnetic resonance (LF-NMR shown that the batters with pre-emulsified sesame oil had higher water holding capacity than the control. Overall, the batters with pre-emulsified sesame oil enabled lowering of fat and energy contents, making the pork batter had better texture.

  8. Properties of bio-oil generated by a pyrolysis of forest cedar residuals with the movable Auger-type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Shun; Ebitani, Kohki, E-mail: ebitani@jaist.ac.jp [School of Materials Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Miyazato, Akio [Nanotechnology Center, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan)

    2016-02-01

    Our research project has developed the new movable reactor for bio-oil production in 2013 on the basis of Auger-type system. This package would be a great impact due to the concept of local production for local consumption in the hilly and mountainous area in not only Japan but also in the world. Herein, we would like to report the properties of the bio-oil generated by the developing Auger-type movable reactor. The synthesized bio-oil possessed C: 46.2 wt%, H: 6.5 wt%, N: wt%, S: <0.1 wt%, O: 46.8 wt% and H{sub 2}O: 18.4 wt%, and served a good calorific value of 18.1 MJ/kg. The spectroscopic and mass analyses such as FT-IR, GC-MS, {sup 13}C-NMR and FT-ICR MS supported that the bio-oil was composed by the fine mixtures of methoxy phenols and variety of alcohol or carboxylic acid functional groups. Thus, it is suggested that the bio-oil generated by the new movable Auger-type reactor has a significant potential as well as the existing bio-oil reported previously.

  9. Properties of bio-oil generated by a pyrolysis of forest cedar residuals with the movable Auger-type reactor

    International Nuclear Information System (INIS)

    Nishimura, Shun; Ebitani, Kohki; Miyazato, Akio

    2016-01-01

    Our research project has developed the new movable reactor for bio-oil production in 2013 on the basis of Auger-type system. This package would be a great impact due to the concept of local production for local consumption in the hilly and mountainous area in not only Japan but also in the world. Herein, we would like to report the properties of the bio-oil generated by the developing Auger-type movable reactor. The synthesized bio-oil possessed C: 46.2 wt%, H: 6.5 wt%, N: wt%, S: <0.1 wt%, O: 46.8 wt% and H 2 O: 18.4 wt%, and served a good calorific value of 18.1 MJ/kg. The spectroscopic and mass analyses such as FT-IR, GC-MS, 13 C-NMR and FT-ICR MS supported that the bio-oil was composed by the fine mixtures of methoxy phenols and variety of alcohol or carboxylic acid functional groups. Thus, it is suggested that the bio-oil generated by the new movable Auger-type reactor has a significant potential as well as the existing bio-oil reported previously

  10. Simulated aging of lubricant oils by chemometric treatment of infrared spectra: potential antioxidant properties of sulfur structures.

    Science.gov (United States)

    Amat, Sandrine; Braham, Zeineb; Le Dréau, Yveline; Kister, Jacky; Dupuy, Nathalie

    2013-03-30

    Lubricant oils are complex mixtures of base oils and additives. The evolution of their performance over time strongly depends on its resistance to thermal oxidation. Sulfur compounds revealed interesting antioxidant properties. This study presents a method to evaluate the lubricant oil oxidation. Two samples, a synthetic and a paraffinic base oils, were tested pure and supplemented with seven different sulfur compounds. An aging cell adapted to a Fourier Transform InfraRed (FT-IR) spectrometer allows the continuous and direct analysis of the oxidative aging of base oils. Two approaches were applied to study the oxidation/anti-oxidation phenomena. The first one leads to define a new oxidative spectroscopic index based on a reduced spectral range where the modifications have been noticed (from 3050 to 2750 cm(-1)). The second method is based on chemometric treatments of whole spectra (from 4000 to 400 cm(-1)) to extract underlying information. A SIMPLe-to-use Interactive Self Modeling Analysis (SIMPLISMA) method has been used to identify more precisely the chemical species produced or degraded during the thermal treatment and to follow their evolution. Pure spectra of different species present in oil were obtained without prior information of their existence. The interest of this tool is to supply relative quantitative information reflecting evolution of the relative abundance of the different products over thermal aging. Results obtained by these two ways have been compared to estimate their concordance. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. Effects of thermal processing on physicochemical properties and oxidative stability of Balanities aegyptiaca kernels and extracted oil

    International Nuclear Information System (INIS)

    Elbadawi, S.M.A.; Ahmad, E.E.M.; Mariod, A.A.; Mathäus, B.

    2017-01-01

    In the present study, the effects of roasting and boiling on the proximate composition of the kernels as well as the physicochemical properties and oxidative stabilities of the extracted oils of Balanites aegyptiaca were investigated. Roasting was performed at 180 °C for 15 minutes, whereas boiling of the kernels was carried out in tap water for one hour. The oils from raw and thermally processed samples were extracted using n-hexane in a Soxhlet extraction apparatus and characterized. The roasting significantly (p < 0.05) influenced the peroxide value and the oxidative stability of the extracted oil in a positive way; whereas boiling had the opposite effect. The oils were composed of linoleic, oleic, stearic, and palmitic acids as the major fatty acids (96%) and contained predominantly α- and γ-tocopherols (ca. 400mg/kg). The study suggests that the oil from roasted kernels could be used as a natural antioxidant for enhancing the characteristics of other edible oils via blending. [es

  12. Prediction of physical-chemical properties of crude oils by 1H NMR analysis of neat samples and chemometrics.

    Science.gov (United States)

    Masili, Alice; Puligheddu, Sonia; Sassu, Lorenzo; Scano, Paola; Lai, Adolfo

    2012-11-01

    In this work, we report the feasibility study to predict the properties of neat crude oil samples from 300-MHz NMR spectral data and partial least squares (PLS) regression models. The study was carried out on 64 crude oil samples obtained from 28 different extraction fields and aims at developing a rapid and reliable method for characterizing the crude oil in a fast and cost-effective way. The main properties generally employed for evaluating crudes' quality and behavior during refining were measured and used for calibration and testing of the PLS models. Among these, the UOP characterization factor K (K(UOP)) used to classify crude oils in terms of composition, density (D), total acidity number (TAN), sulfur content (S), and true boiling point (TBP) distillation yields were investigated. Test set validation with an independent set of data was used to evaluate model performance on the basis of standard error of prediction (SEP) statistics. Model performances are particularly good for K(UOP) factor, TAN, and TPB distillation yields, whose standard error of calibration and SEP values match the analytical method precision, while the results obtained for D and S are less accurate but still useful for predictions. Furthermore, a strategy that reduces spectral data preprocessing and sample preparation procedures has been adopted. The models developed with such an ample crude oil set demonstrate that this methodology can be applied with success to modern refining process requirements. Copyright © 2012 John Wiley & Sons, Ltd.

  13. Evaluation of solution and rheological properties for hydrophobically associated polyacrylamide copolymer as a promised enhanced oil recovery candidate

    Directory of Open Access Journals (Sweden)

    A.N. El-hoshoudy

    2017-09-01

    Full Text Available Crude oil is the most critical energy source in the world, especially for transportation, provision of heat and light as there has not been a sufficient energy source to replace crude oil has broadly integrated, so there is an urgent need to maximize the extraction of the original oil in-place for every reservoir, and accelerating the development of enhanced oil recovery (EOR technologies. Polymer flooding by hydrophobically associated polyacrylamides (HAPAM is a widely used technique through EOR technology. For successful application of these polymers, one should evaluate rheological and solution properties at simulated reservoir conditions as a function of polymer concentration, salinity, temperature and shear rate. The results showed that these copolymers exhibit favorable salt tolerance, temperature resistance, and recoverable viscosity after shearing, reasonable thickening behavior and improved viscosity enhancement properties due to presence of hydrophobic association in the copolymer main chains. Moreover, its capacity for oil production improvement was evaluated during flooding experiments through one dimensional sandstone model at simulated reservoir conditions.

  14. Biochemical composition and antioxidant properties of Lavandula angustifolia Miller essential oil are shielded by propolis against UV radiations.

    Science.gov (United States)

    Gismondi, Angelo; Angelo, Gismondi; Canuti, Lorena; Lorena, Canuti; Grispo, Marta; Marta, Grispo; Canini, Antonella; Antonella, Canini

    2014-01-01

    UV radiations are principal causes of skin cancer and aging. Suntan creams were developed to protect epidermis and derma layers against photodegradation and photooxidation. The addition of antioxidant plant extracts (i.e. essential oil) to sunscreens is habitually performed, to increase their UV protective effects and to contrast pro-radical and cytotoxic compounds present in these solutions. According to these observations, in the present work, the alteration of chemical composition and bioactive properties of Lavandula angustifolia Miller essential oil, exposed to UV light, was investigated. UV induced a significant deterioration of lavender oil biochemical profile. Moreover, the antioxidant activity of this solution, in in vitro tests and directly on B16-F10 melanoma cells, greatly decreased after UV treatment. Our results also showed that essential oil was shielded from UV stress by propolis addition. Even after UV treatment, bee glue highly protected lavender oil secondary metabolites from degradation and also preserved their antiradical properties, both in in vitro antioxidant assays and in cell oxidative damage evaluations. This research proposed propolis as highly efficient UV protective and antiradical additive for sunscreens, cosmetics and alimentary or pharmaceutical products containing plant extracts. © 2013 The American Society of Photobiology.

  15. The use of modern on-site bioremediation systems to reduce crude oil contamination on oilfield properties

    International Nuclear Information System (INIS)

    Hildebrandt, W.W.; Wilson, S.B.

    1991-01-01

    Oil-field properties frequently have areas in which the soil has been degraded with crude oil. Soil contaminated in this manner is often considered either a hazardous waste or designated waste under regulatory guidelines. As a result, there is often concern about an owner's liabilities and the financial institution's liabilities whenever oilfield properties are transferred to new operators, abandoned, or converted to other uses such as real estate. There is also concern about the methods and relative costs to remediate soil which has been contaminated with crude oil. Modern, well-designed, soil bioremediation systems are cost effective for the treatment of crude oil contamination, and these systems can eliminate an owner's subsequent liabilities. Compared to traditional land-farming practices, a modern on-site bioremediation system (1) requires significantly less surface area, (2) results in lower operating costs, and (3) provides more expeditious results. Compared to excavation and off-site disposal of the contaminated soil, on-site bioremediation will eliminate subsequent liabilities and is typically more cost effective. Case studies indicate that o-site bioremediation systems have been successful at reducing the crude oil contamination in soil to levels which are acceptable to regulatory agencies in less than 10 weeks. Total costs for on-site bioremediation has ranged from $35 to $40 per cubic yard of treated soil, including excavation

  16. Simulation of an oil film at the sea surface and its radiometric properties in the SWIR

    NARCIS (Netherlands)

    Schwenger, F.; Eijk, A.M.J. van

    2017-01-01

    The knowledge of the optical contrast of an oil layer on the sea under various surface roughness conditions is of great interest for oil slick monitoring techniques. This paper presents a 3D simulation of a dynamic sea surface contaminated by a floating oil film. The simulation considers the damping

  17. Effects of allspice, cinnamon, and clove bud essential oils in edible apple films on physical properties and antimicrobial activities.

    Science.gov (United States)

    Du, W-X; Olsen, C W; Avena-Bustillos, R J; McHugh, T H; Levin, C E; Friedman, Mendel

    2009-09-01

    Essential oils (EOs) derived from plants are rich sources of volatile terpenoids and phenolic compounds. Such compounds have the potential to inactivate pathogenic bacteria on contact and in the vapor phase. Edible films made from fruits or vegetables containing EOs can be used commercially to protect food against contamination by pathogenic bacteria. EOs from cinnamon, allspice, and clove bud plants are compatible with the sensory characteristics of apple-based edible films. These films could extend product shelf life and reduce risk of pathogen growth on food surfaces. This study evaluated physical properties (water vapor permeability, color, tensile properties) and antimicrobial activities against Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes of allspice, cinnamon, and clove bud oils in apple puree film-forming solutions formulated into edible films at 0.5% to 3% (w/w) concentrations. Antimicrobial activities were determined by 2 independent methods: overlay of the film on top of the bacteria and vapor phase diffusion of the antimicrobial from the film to the bacteria. The antimicrobial activities against the 3 pathogens were in the following order: cinnamon oil > clove bud oil > allspice oil. The antimicrobial films were more effective against L. monocytogenes than against the S. enterica. The oils reduced the viscosity of the apple solutions and increased elongation and darkened the colors of the films. They did not affect water vapor permeability. The results show that apple-based films with allspice, cinnamon, or clove bud oils were active against 3 foodborne pathogens by both direct contact with the bacteria and indirectly by vapors emanating from the films.

  18. Oil from pumpkin (Cucurbita pepo L.) seeds: evaluation of its functional properties on wound healing in rats.

    Science.gov (United States)

    Bardaa, Sana; Ben Halima, Nihed; Aloui, Fatma; Ben Mansour, Riadh; Jabeur, Hazem; Bouaziz, Mohamed; Sahnoun, Zouheir

    2016-04-11

    Increasing natural drug demand for pharmaceutical uses has encouraged scientifics all over the world to explore medicinal plants recognized as efficient remedies. In this context, extracted oil from pumpkin seeds (Cucurbita pepo L.) is an interesting target, as it is composed with prominent pharmacological properties to possible wound healing treatments. The composition and content of certain bioactive constituents of the cold pressed oil obtained from pumpkin seeds (Cucurbita pepo L.) were analyzed and studied for their wound healing properties. Uniform wounds were induced on the dorsum of 18 rats, randomly divided into three groups. The wounds were photographed, and topically treated with saline solution (control group), 0.13 mg/mm(2) of a reference drug ("Cicaflora cream®"), and 0.52 μl/mm(2) of pumpkin's oil each 2 days until the first group is completely healing and so far biopsies were histologically assessed. The composition and content of tocopherols, fatty acids, and phytosterols were determined. The results showed an excellent quality of pumpkin oil with high content of polyunsaturated fatty acids (Linoleic acid: 50.88 ± 0.106 g/100 g of total fatty acids), tocopherols (280 ppm) and sterols (2086.5 ± 19.092 ppm). High content of these bioactive components were in agreement with an efficient wound healing by the mean of an in vivo study. In fact, morphometric assessment and histological findings revealed healed biopsies from pumpkin oil treated group of rats, unlike untreated group, and a full re-epithelialization with reappearance of skin appendages and well organized collagen fibers without inflammatory cells. This study showed the significance of oil from pumpkin seeds (Cucurbita pepo L.) as a promising drug to healing wounds in animal assays. As a whole, pumpkin's oil would be recommended in the nutritional and medicinal purposes.

  19. Lithological and petrophysical properties and prospects of oil and gas presence of Kalinsky series in Absheron

    International Nuclear Information System (INIS)

    Kheirov, M.B; Dilbazi, Z.H; Askerov, F.H; Imanov, A.D

    2002-01-01

    %-35% (Fig.1)Carbon content,porosity and permeability of the rocks correspondingly range within 0,2-42%, 2,9-33,3% and (34-1020)10-15sq.m.It is expedient to continue exploration in the southeastern part of the region, due to the facts, that reservoir properties here increase, reservoir rocks become thicker, and the reservoir covers about 50% of the whole area.Thus, Kalinsky series, and its lower horizons in particular are scarcely studied.In some areas these horizons are not exposed.That is why for the purpose of oil and gas presence degree clarification it is necessary to resume exploration in Absheron oil and gas bearing region Kalinsky series, and in particular in its lower horizons.

  20. Preparation of starch nanoparticles in water in oil microemulsion system and their drug delivery properties.

    Science.gov (United States)

    Wang, Xinge; Chen, Haiming; Luo, Zhigang; Fu, Xiong

    2016-03-15

    In this research, 1-hexadecyl-3-methylimidazolium bromide C16mimBr/butan-1-ol/cyclohexane/water ionic liquid microemulsion was prepared. The effects of n-alkyl alcohols, alkanes, water content and temperature on the properties of microemulsion were studied by dilution experiment. The microregion of microemulsion was identified by pseudo-ternary phase diagram and conductivity measurement. Then starch nanoparticles were prepared by water in oil (W/O) microemulsion-cross-linking methods with C16mimBr as surfactant. Starch nanoparticles with a mean diameter of 94.3nm and narrow size distribution (SD=3.3) were confirmed by dynamic light scattering (DLS). Scanning electron microscope (SEM) data revealed that starch nanoparticles were spherical granules with the size about 60nm. Moreover the results of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) demonstrated the formation of cross-linking bonds in starch molecules. Finally, the drug loading and releasing properties of starch nanoparticles were investigated with methylene blue (MB) as drug model. This work may provide an efficient pathway to synthesis starch nanoparticles. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. African peppermint (Mentha piperita from Morocco: Chemical composition and antimicrobial properties of essential oil

    Directory of Open Access Journals (Sweden)

    Chraibi Marwa

    2017-01-01

    Full Text Available To replace and avoid synthetic chemicals toxicity, there is a growing interest in the investigation of natural products from plant origin for the discovery of active compounds with antimicrobial properties. This work was devoted to determine chemical composition and antimicrobial properties of the EO of M. piperita harvested in the garden of the National Institute of Medicinal and Aromatic Plants of Morocco. Experiments have been conducted at the Microbial Biotechnology Laboratory at the Sciences and Technology Faculty, Sidi Mohamed Ben Abdellah University, Fez, Morocco. M. piperita oil was screened for its antimicrobial activity against seven bacteria and two fungi using broth microdilution method. Chemical EO analysis was performed using CPG/MS. The EO revealed menthol (46.32%, menthofuran (13.18%, menthyl acetate (12.10%, menthone (7.42%, and 1,8-cineole (6.06% as the main constituents. The tested EO exhibited strong inhibitory effect against all tested microorganisms with minimum inhibitory concentrations ranging from 0.062% to 0.5% (v/v, except for Pseudomonas aeruginosa that was the least sensitive and was only inhibited by concentrations as high as 0.5% (v/v. The studied EO showed an antimicrobial potential. This reinforces its use as an alternative to chemical additives that can be applied to the food and drug industry.

  2. EFFECTS OF COMPACTIVE EFFORTS ON GEOTECHNICAL PROPERTIES OF SPENT ENGINE OIL CONTAMINATED LATERITE SOIL

    Directory of Open Access Journals (Sweden)

    OLUREMI, J. ROTIMI

    2017-03-01

    Full Text Available Investigation of the effects of compactive efforts and spent engine oil (SEO contamination on the geotechnical properties of lateritic soils was made. Contaminated specimens were prepared by mixing lateritic soil with up to 10 % SEO by dry weight of the soil in step concentration of 2 % and subjected to geotechnical tests. Results indicated a decrease in the fine content, decrease in liquid limit, maximum dry density (MDD and unconfined compressive strength (UCS with up to 10 % SEO content. No general trend was observed in the optimum moisture content (OMC with increasing SEO content. The MDD, OMC and UCS values increased with increase in the compactive effort. Regression analysis of the results showed that optimum moisture content, fine content and compactive effort significantly influence the soils UCS values. Analysis of variance showed that SEO and compactive effort has significant effect on the parameters with the exception in one case. The results of laboratory tests showed that geotechnical properties of the SEO contaminated soil were immensely impaired.

  3. Antioxidant, Anti-microbial Properties and Chemical Composition of Cumin Essential Oils Extracted by Three Methods

    Directory of Open Access Journals (Sweden)

    Fang Lianying

    2018-04-01

    Full Text Available The purpose of this study is to evaluate the chemical composition, antioxidant and anti-bacterial activity of cumin essential oils (CEOs extracted by different techniques, including supercritical carbon dioxide extraction (SCE, subcritical butane extraction (SBE and traditional solvent extraction (SE. Our results indicated that CEOs are a valuable source of bioactive compounds, including cumin aldehyde, γ-terpinene and β-pinene. The most abundant components found in CEOs obtained by SCE and SBE were similar, while the abundant components in SE, β-Cumic aldehyde (19.31% and α-phellandrene (9.49%, were distinctive. CEOs obtained by SCE exhibited higher antioxidant activity, followed by those extracted by SE and SBE. Moreover, the anti-microbial properties of CEOs obtained by SCE and SBE were higher than that of CEOs collected by SE. In conclusion, CEOs exhibit strong antioxidant and anti-microbial properties, which suggests a potential role of CEOs in preventing diseases associated with aging and oxidative stress, and our results highlight the potential usage of CEOs in the food industry.

  4. African peppermint (Mentha piperita) from Morocco: Chemical composition and antimicrobial properties of essential oil

    Science.gov (United States)

    Marwa, Chraibi; Fikri-Benbrahim, Kawtar; Ou-Yahia, Douae; Farah, Abdellah

    2017-01-01

    To replace and avoid synthetic chemicals toxicity, there is a growing interest in the investigation of natural products from plant origin for the discovery of active compounds with antimicrobial properties. This work was devoted to determine chemical composition and antimicrobial properties of the EO of M. piperita harvested in the garden of the National Institute of Medicinal and Aromatic Plants of Morocco. Experiments have been conducted at the Microbial Biotechnology Laboratory at the Sciences and Technology Faculty, Sidi Mohamed Ben Abdellah University, Fez, Morocco. M. piperita oil was screened for its antimicrobial activity against seven bacteria and two fungi using broth microdilution method. Chemical EO analysis was performed using CPG/MS. The EO revealed menthol (46.32%), menthofuran (13.18%), menthyl acetate (12.10%), menthone (7.42%), and 1,8-cineole (6.06%) as the main constituents. The tested EO exhibited strong inhibitory effect against all tested microorganisms with minimum inhibitory concentrations ranging from 0.062% to 0.5% (v/v), except for Pseudomonas aeruginosa that was the least sensitive and was only inhibited by concentrations as high as 0.5% (v/v). The studied EO showed an antimicrobial potential. This reinforces its use as an alternative to chemical additives that can be applied to the food and drug industry. PMID:28795021

  5. Disposal of olive oil mill wastes in evaporation ponds: effects on soil properties.

    Science.gov (United States)

    Kavvadias, V; Doula, M K; Komnitsas, K; Liakopoulou, N

    2010-10-15

    The most common practice followed in the Med countries for the management of olive oil mill wastes (OMW) involves disposal in evaporation ponds or direct disposal on soil. So far there is lack of reliable information regarding the long-term effects of OMW application on soils. This study assesses the effects of OMW disposal in evaporation ponds on underlying soil properties in the wider disposal site as well as the impacts of untreated OMW application on agricultural soils. In case of active disposal sites, the carbonate content in most soils was decreased, whereas soil EC, as well as Cl(-), SO(4)(2-), PO(4)(3-), NH(4)(+) and particularly K(+) concentrations were substantially increased. Soil pH was only marginally affected. Phenol, total N, available P and PO(4)(3-) concentrations were considerably higher in the upper soil layers in areas adjacent to the ponds. Available B as well as DTPA extractable Cu, Mn, Zn and Fe increased substantially. Most surface soil parameters exhibited increased values at the inactive site 6 years after mill closure and cease of OMW disposal activities but differences were diminished in deeper layers. It is therefore concluded that long-term uncontrolled disposal of raw OMW on soils may affect soil properties and subsequently enhance the risk for groundwater contamination. 2010 Elsevier B.V. All rights reserved.

  6. Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties

    Directory of Open Access Journals (Sweden)

    Regiane Victória de Barros Fernandes

    2013-02-01

    Full Text Available Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%, inlet air temperature (135-195 ºC, and feed flow rate (0.5-1.0 L.h-1 on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%, low inlet air temperature (135 ºC, and moderate feed flow rate (0.7 L.h-1 are the best spray drying conditions.

  7. Thermal properties of oil palm nano filler/kenaf reinforced epoxy hybrid nanocomposites

    Science.gov (United States)

    Saba, N.; Paridah, M. T.; Abdan, K.; Ibrahim, N. A.

    2016-11-01

    The aim of this research study was to fabricate nano oil palm empty fruit bunch (OPEFB)/kenaf/epoxy hybrid nanocomposites and to make comparative study on the thermal properties of nano OPEFB/kenaf/epoxy hybrid nanocomposites with the montmorillonite (MMT)/kenaf/epoxy hybrid nanocomposites and organically modified MMT (OMMT)/kenaf/epoxy hybrid nanocomposites. Epoxy based kenaf hybrid nanocomposites was prepared by dispersing the nano filler (nano OPEFB filler, MMT, OMMT) at 3% loading through high speed mechanical stirrer followed by hand lay-up technique. Thermal properties of hybrid nanocomposites were analyzed through thermogravimetry analyzer (TGA), and differential scanning calorimetry (DSC). Obtained results specified that addition of nano OPEFB filler improves the thermal stability and char yield of kenaf/epoxy composites. Furthermore, the increase in decomposition temperature by the nano OPEFB filler was quite comparable to the MMT/kenaf/epoxy but relatively less than OMMT/kenaf/epoxy hybrid nanocomposites. We concluded from overall consequences that the nano OPEFB filler can be used as the promising and innovative alternative of existing expensive nano filler, with relatively lesser impact on the environment having marked pronounced impact on the construction, automotive, aerospace, electronics and semiconducting sectors as future industries based on bio-wastes with satisfactory light weight and thermal stability on other side.

  8. Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6

    International Nuclear Information System (INIS)

    Arun Prakash, N.; Gnanamoorthy, R.; Kamaraj, M.

    2010-01-01

    Grain size refinement by severe surface plastic deformation is one way of improving the surface properties. This paper describes the microstructural evolution due to severe surface plastic deformation by oil jet peening in aluminium alloy, AA6063-T6. Detail characterization of the treated surfaces using X-ray diffraction analysis and transmission electron microscopy revealed the formation of submicron size grains at and near the surface. The nozzle-traveling velocity decides the peening intensity and coverage and affects the surface properties. The specimen peened at low nozzle-traveling velocity exhibited an ultrafine grain size (∼210 nm) with high surface hardness (∼0.88 GPa), compressive residual stress (-102 ± 7 MPa) and dislocation density. The hardness is high at the surface and the depth of hardened layer is ∼400 μm. Formation of high-density dislocations and associated grain refinement resulted in increased surface hardness. Presence of surface modified layer will be beneficial in improving the fatigue and tribo behavior.

  9. Influence of polystyrene addition to cellulose on chemical structure and properties of bio-oil obtained during pyrolysis

    International Nuclear Information System (INIS)

    Rutkowski, Piotr; Kubacki, Andrzej

    2006-01-01

    The cellulose (C), polystyrene (PS) and cellulose/polystyrene (C-PS) mixtures (3:1, 1:1, 1:3 w/w) were subjected to a pyrolysis process to produce bio-oil. The pyrolytic oil yield was in the range of 45.5-94.8 wt% depending on the composition of the sample. Pyrolysis of polystyrene gives the highest oil yield, whereas for cellulose, the yield of liquid products was the lowest. The basic physicochemical properties of oils are strongly influenced by the original material and do not change additively. The polystyrene addition to cellulose clearly improves the quality of the bio-oil, resulting in decreases in acid number, pour point and density. The change of color is not so distinct. The FT-IR analysis of the oils showed that the oxygen functionalities and hydrocarbons contents highly depend on the composition of the cellulose/polystyrene mixture. The fractionation of bio-oils by column chromatography using hexane and benzene was followed by GC-MS analyses. Different classes of organic compounds were identified, i.e., carboxylic acids, phenols, aldehydes, ketones, esters, ethers and unsaturated linear and cyclic hydrocarbons. The proportion of hydrocarbons increases with a decrease of the cellulose/polystyrene ratio. The obtained results indicate that during pyrolysis, not only does decomposition of cellulose and polystyrene occur, but also, reactions between products from C and PS take place. That was proved by the presence of compounds identified only in the bio-oils obtained from C-PS compositions

  10. Authentication of vegetable oils on the basis of their physico-chemical properties with the aid of chemometrics.

    Science.gov (United States)

    Zhang, Guowen; Ni, Yongnian; Churchill, Jane; Kokot, Serge

    2006-09-15

    In food production, reliable analytical methods for confirmation of purity or degree of spoilage are required by growers, food quality assessors, processors, and consumers. Seven parameters of physico-chemical properties, such as acid number, colority, density, refractive index, moisture and volatility, saponification value and peroxide value, were measured for quality and adulterated soybean, as well as quality and rancid rapeseed oils. Chemometrics methods were then applied for qualitative and quantitative discrimination and prediction of the oils by methods such exploratory principal component analysis (PCA), partial least squares (PLS), radial basis function-artificial neural networks (RBF-ANN), and multi-criteria decision making methods (MCDM), PROMETHEE and GAIA. In general, the soybean and rapeseed oils were discriminated by PCA, and the two spoilt oils behaved differently with the rancid rapeseed samples exhibiting more object scatter on the PC-scores plot, than the adulterated soybean oil. For the PLS and RBF-ANN prediction methods, suitable training models were devised, which were able to predict satisfactorily the category of the four different oil samples in the verification set. Rank ordering with the use of MCDM models indicated that the oil types can be discriminated on the PROMETHEE II scale. For the first time, it was demonstrated how ranking of oil objects with the use of PROMETHEE and GAIA could be utilized as a versatile indicator of quality performance of products on the basis of a standard selected by the stakeholder. In principle, this approach provides a very flexible method for assessment of product quality directly from the measured data.

  11. Moisture Sensitivity, Optical, Mechanical and Structural Properties of Whey Protein-Based Edible Films Incorporated with Rapeseed Oil

    Directory of Open Access Journals (Sweden)

    Justyna Kadzińska

    2016-01-01

    Full Text Available The objective of this work is to study the effect of the rapeseed oil content on the physical properties of whey protein emulsion films. For this purpose, whey protein films with the addition of 0, 1, 2 and 3 % of rapeseed oil, and glycerol as a plasticizer were obtained by the casting method. Film-forming emulsions were evaluated and compared using light scattering granulometry. The Sauter mean diameters (d32 of lipid droplets in film-forming solutions showed an increasing trend when increasing the oil volume fractions. The inclusion of rapeseed oil enhanced the hydrophobic character of whey protein films, reducing moisture content and film solubility in water. All emulsified films showed high lightness (L*≈90. Parameter a* decreased and parameter b* and total colour difference (ΔE increased with the increase of the volume fractions of oil. These results were consistent with visual observations; control films were transparent and those containing oil opaque. Water vapour sorption experimental data at the full range of water activity values from 0.11 to 0.93 were well described with Peleg’s equation (R2≥0.99. The tensile strength, Young’s modulus and elongation at break increased with the increase of rapeseed oil volume fraction, which could be explained by interactions between lipids and the protein matrix. These results revealed that rapeseed oil has enormous potential to be incorporated into whey protein to make edible film or coating for some food products. The mechanical resistance decreased with the addition of the lipids, and the opacity and soluble matter content increased.

  12. Moisture Sensitivity, Optical, Mechanical and Structural Properties of Whey Protein-Based Edible Films Incorporated with Rapeseed Oil.

    Science.gov (United States)

    Galus, Sabina; Kadzińska, Justyna

    2016-03-01

    The objective of this work is to study the effect of the rapeseed oil content on the physical properties of whey protein emulsion films. For this purpose, whey protein films with the addition of 0, 1, 2 and 3% of rapeseed oil, and glycerol as a plasticizer were obtained by the casting method. Film-forming emulsions were evaluated and compared using light scattering granulometry. The Sauter mean diameters ( d 32 ) of lipid droplets in film-forming solutions showed an increasing trend when increasing the oil volume fractions. The inclusion of rapeseed oil enhanced the hydrophobic character of whey protein films, reducing moisture content and film solubility in water. All emulsified films showed high lightness ( L* ≈90). Parameter a * decreased and parameter b* and total colour difference (∆ E ) increased with the increase of the volume fractions of oil. These results were consistent with visual observations; control films were transparent and those containing oil opaque. Water vapour sorption experimental data at the full range of water activity values from 0.11 to 0.93 were well described with Peleg's equation (R 2 ≥0.99). The tensile strength, Young's modulus and elongation at break increased with the increase of rapeseed oil volume fraction, which could be explained by interactions between lipids and the protein matrix. These results revealed that rapeseed oil has enormous potential to be incorporated into whey protein to make edible film or coating for some food products. The mechanical resistance decreased with the addition of the lipids, and the opacity and soluble matter content increased.

  13. MAPS Appraisal Report Form

    CERN Multimedia

    HR Department

    2005-01-01

    As announced in Weekly Bulletin 48/2004, from now onwards, the paper MAPS appraisal report form has been replaced by an electronic form, which is available via EDH (on the EDH desktop under Other Tasks / HR & Training) No changes have been made to the contents of the form. Practical information will be available on the web page http://cern.ch/ais/projs/forms/maps/info.htm, and information meetings will be held on the following dates: 18 January 2005: MAIN AUDITORIUM (500-1-001) from 14:00 to 15:30. 20 January 2005: AB AUDITORIUM II (864-1-D02) from14:00 to 15:30. 24 January 2005: AT AUDITORIUM (30-7-018) from 10:00 to 11:30. Human Resources Department Tel. 73566

  14. Appraising Adaptive Management

    Directory of Open Access Journals (Sweden)

    Kai N. Lee

    1999-12-01

    Full Text Available Adaptive management is appraised as a policy implementation approach by examining its conceptual, technical, equity, and practical strengths and limitations. Three conclusions are drawn: (1 Adaptive management has been more influential, so far, as an idea than as a practical means of gaining insight into the behavior of ecosystems utilized and inhabited by humans. (2 Adaptive management should be used only after disputing parties have agreed to an agenda of questions to be answered using the adaptive approach; this is not how the approach has been used. (3 Efficient, effective social learning, of the kind facilitated by adaptive management, is likely to be of strategic importance in governing ecosystems as humanity searches for a sustainable economy.

  15. Alpha amylase from a fungal culture grown on oil cakes and its properties

    OpenAIRE

    Ramachandran,Sumitra; Patel,Anil K.; Nampoothiri,Kesavan Madhavan; Chandran,Sandhya; Szakacs,George; Soccol,Carlos Ricardo; Pandey,Ashok

    2004-01-01

    Solid-state fermentation was carried out for the production of alpha-amylase using Aspergillus oryzae. Different oil cakes such as coconut oil cake (COC) sesame oil cake (SOC), groundnut oil cake (GOC), palm kernel cake (PKC) and olive oil cake (OOC) were screened to be used as substrate for the enzyme production and also compared with wheat bran (WB). GOC was found to be the best producer of the enzyme among these. Combination of WB and GOC (1:1) resulted higher enzyme titres than the indivi...

  16. MASS APPRAISAL AND REAL ESTATE TAXATION

    Directory of Open Access Journals (Sweden)

    VORONIN V. О.

    2015-12-01

    Full Text Available Raising of problem. The government at the legislative level fixed the definition of market value for tax purposes as mandatory in the implementation of real estate transactions. In order to meet the requirements of objectivity, uniformity and consistency of the results obtained during the evaluation procedures, as well as minimize the influence of subjective factors, there is a need to develop a methodology for evaluating an automated procedure for determining the estimated value of the property based on its market value. To solve this problem, we use special techniques and methods of mass appraisal that incorporates computer-supported statistical analyses, such as multiple regression analysis and adaptive estimation procedure for use in the field of property valuation and property rights. Purpose. Realization of this goal involves the development of the concept of a computer-assisted mass appraisal. The basis of this concept is an adaptive hybrid models of market pricing in different market segments that incorporates software adaptive algorithms for determining the market value by the three evaluation approaches using the results of a multi-level real estate market analysis. It was proposed the utility automated valuation models which is intended for the implementation of a computerized real estate valuation based on the developed software adaptive algorithms. Con-clusion. To achieve this goal have been developed and used concepts underlying of computerized mass appraisal. The basis of this concept is adaptive hybrid pricing models in various segments of the real estate market of Ukraine. The problem is solved by the application of the developed software-based adaptive algorithms for determining the market value of three evaluation approaches using the results of a multi-level analysis of the real estate market. It was pro-posed the model of automated appraisal, according to it was implemented computerization of appraisal procedures on the

  17. Properties of fresh and hardened sustainable concrete due to the use of palm oil fuel ash as cement replacement

    Science.gov (United States)

    Hamada, Hussein M.; Jokhio, Gul Ahmed; Mat Yahaya, Fadzil; Humada, Ali M.

    2018-04-01

    Palm oil fuel ash (POFA) is a by-product resulting from the combustion of palm oil waste such as palm oil shell and empty fruit bunches to generate electricity in the palm oil mills. Considerable quantities of POFA thus generated, accumulate in the open fields and landfills, which causes atmospheric pollution in the form of generating toxic gases. Firstly, to protect the environment; and secondly, having excellent properties for this purpose; POFA can be and has been used as partial cement replacement in concrete preparation. Therefore, this paper compiles the results obtained from previous studies that address the properties of concrete containing POFA as cement replacement in fresh and hardened states. The results indicate that there is a great potential to using POFA as cement replacement because of its ability to improve compressive strength, reduce hydration heat of cement mortar and positively affect other fresh and hardened concrete properties. The paper recommends that conducting further studies to exploit high volume of POFA along with other additives as cement replacement while maintaining high quality of concrete can help minimize CO2 emissions due to concrete.

  18. Structure-property studies of thermoplastic and thermosetting polyurethanes using palm and soya oils-based polyols.

    Science.gov (United States)

    Mohammed, Issam Ahmed; Al-Mulla, Emad Abbas Jaffar; Kadar, Nurul Khizien Abdul; Ibrahim, Mazlan

    2013-01-01

    Palm and soya oils were converted to monoglycerides via transesterification of triglycerides with glycerol by one step process to produce renewable polyols. Thermoplastic polyurethanes (TPPUs) were prepared from the reaction of the monoglycerides which act as polyol with 4,4'-methylenediphenyldiisocyanate (MDI) whereas, thermosetting polyurethanes (TSPUs) were prepared from the reaction of glycerol, MDI and monoglycerides in one pot. Characterization of the polyurethanes was carried out by FT-IR, (1)H NMR, and iodine value and sol-gel fraction. The TSPUs showed good thermal properties compared to TPPUs as well as TSPUs exhibits good properties in pencil hardness and adhesion, however poorer in flexural and impact strength compared to TPPUs. The higher percentage of cross linked fraction, the higher degree of cross linking occurred, which is due to the higher number of double bond presents in the TSPUs. These were reflected in iodine value test as the highest iodine value of the soya-based thermosetting polyurethanes confirmed the highest degree of cross linking. Polyurethanes based on soya oil showed better properties compared to palm oil. This study is a breakthrough development of polyurethane resins using palm and soya oils as one of the raw materials.

  19. Chemical composition, antimicrobial and antioxidant properties of Mentha longifolia (L. Huds. essential oil

    Directory of Open Access Journals (Sweden)

    Haris Nikšić

    2012-12-01

    Full Text Available Introduction: Present study describes the antimicrobial activity and free radical scavenging capacity (RSC of essential oil from Mentha longifolia (L. Huds. Aim of this study to investigate the quality, antimicrobial andantioxidant activity of wild species Mentha longifolia essential oil from Bosnia and Herzegovina.Methods: The chemical profi le of essential oil was evaluated by the means of gas chromatography-mass spectrometry (GC-MS and thin-layer chromatography (TLC. Antimicrobial activity was tested against 6bacterial strains. RSC was assessed by measuring the scavenging activity of essential oils on 2,2- diphenyl-1-picrylhydrazil (DPPH.Results: The main constituents of the essential oil of M. longifoliae folium were oxygenated monoterpenes,piperitone oxide (63.58% and 1,8-cineole (12.03%. Essential oil exhibited very strong antibacterial activity.The most important antibacterial activity essential oil was expressed on Gram negative strains: Escherichia coli, Pseudomonas aerginosa and Salmonella enterica. subsp.enterica serotype ABONY. Antioxidant activity was evaluated as a RSC. Investigated essential oil was able to reduce DPPH radicals into the neutral DPPHH form (IC50=10.5 μg/ml and this activity was dose –dependent.Conclusion: The study revealed signifi cant antimicrobial activity of the investigated essential oil. The examined oil exhibited high RSC, which was found to be in correlation to the content of mainly monoterpeneketones and aldehydes. These results indicate that essential oils could serve as safe antioxidant and antiseptic supplements in pharmaceuticals.

  20. The impact of oil and natural gas facilities on rural residential property values

    International Nuclear Information System (INIS)

    Boxall, P.C.

    2005-01-01

    This PowerPoint presentation examined challenges in the economic valuation of environmental changes within the context of formal real estate markets. It was proposed that some values that are expressed in markets can be affected by environmental changes and should be used in resource development land assessments. Details of indirect market valuation and revealed preference methods were reviewed. An outline of hedonic pricing was presented. It was noted that hedonic pricing can be used with other market values and prices such as tourism, art prices and hotel prices, where multivariate regression techniques are used and regression coefficients reveal information on the implicit prices of certain characteristics. Property value examples in the environmental economics literature were reviewed. A case study using data from eco-terrorism costs was presented. Issues concerning sour gas facilities were discussed with reference to public anxiety over hydrogen sulfide (H 2 S) toxicity and flares. Concerns over health risks and negative amenity impacts were discussed. The impacts of sour gas facilities on property values of residential acreages in and around Calgary were considered, and a map of the study area was presented. An outline of emergency plan response zones was provided. Price effects of industry facilities were presented, including marginal and cumulative impacts on price. It was concluded that oil and gas activities have significant impacts on rural residential property prices, but that industry members currently report that there is little to no effect. It was suggested that the research presented in this paper could be used to assess levels of compensation. tabs., figs

  1. Alienation appraisals distinguish adults diagnosed with DID from PTSD.

    Science.gov (United States)

    DePrince, Anne P; Huntjens, Rafaële J C; Dorahy, Martin J

    2015-11-01

    Studies are beginning to show the importance of appraisals to different types and severities of psychiatric disorders. Yet, little work in this area has assessed whether trauma-related appraisals can differentiate complex trauma-related disorders, such as posttraumatic stress disorder (PTSD) and dissociative identity disorder (DID). The current study evaluated whether any of 6 trauma-related appraisals distinguished adults diagnosed with DID from those diagnosed with PTSD. To accomplish this, we first examined the basic psychometric properties of a Dutch-translated short-form of the Trauma Appraisals Questionnaire (TAQ) in healthy control (n = 57), PTSD (n = 27) and DID (n = 12) samples. The short-form Dutch translation of the TAQ showed good internal reliability and criterion-related validity for all 6 subscales (betrayal, self-blame, fear, alienation, shame, anger). Of the 6 subscales, the alienation appraisal subscale specifically differentiated DID from PTSD, with the former group reporting more alienation. Abuse-related appraisals that emphasize disconnection from self and others may contribute to reported problems of memory and identity common in DID. The current findings suggest that addressing experiences of alienation may be particularly important in treatment for clients diagnosed with DID. (c) 2015 APA, all rights reserved).

  2. Properties of glass, oil's formation...how to explain it? The secret is to amaze!

    Science.gov (United States)

    Merlino, Silvia; Evangelista, Rosaria; Bianucci, Marco; Mantovani, Carlo; Gambarelli, Licia

    2013-04-01

    and allows children to follow stages and the secrets of the process: the sugar caramel! The true nature of the material is revealed only at the last: this leads to great fun and enjoyment of student, amazed to be able to enjoy the results of their experiments. Second path: it illustrates the processes involved in the formation of coal deposits and oil fiels. It explains the complex physical and chemical phenomena that led to the formation of fossil fuels from plant or animal remains of the Carboniferous era. The emphasis is reserved to the properties of the rocks in which hydrocarbons are trapped and to the physical processes that induce their migration from the deep layers to the more superficial crust. The students argue stimulated by curious and fun experiments on the concepts of density, temperature and pressure: they build real models of fields, using common materials, such as sponges with different porosity, water, oil, soil, peat and charcoal . During the experimental process the boys arrive at rigorous justification of the phenomena, working with the same attitude of the detectives in the course of an investigation, finding the right way to get the correct scientific explanation.

  3. Some physical and chemical properties of bitter melon (Momordica charantia L. seed and fatty acid composition of seed oil

    Directory of Open Access Journals (Sweden)

    Muharrem GÖLÜKÇÜ

    2014-06-01

    Full Text Available Edible part and leaves of bitter melon (Momordica charantia L. are used as food or medicine to control some diseases because of its antioxidant, antibacterial, anticancer, anti-hepatotoxic, antiviral, antiulcerogenic and larvicidal effects. Although fruits have considerable amount of seeds, they have not received much attention. In this study, some physical and chemical properties of the seed and also fatty acid composition of seed oil were determined. Oil content of the sample was determined by soxhlet apparatus as 26.10% in dried sample. Fatty acid composition was analyzed by GC-MS and seven fatty acids were identified and their ratios were determined in this seed oil. The main fatty acid was determined as α-eleostearic (45.60%. The other fatty acids were palmitic (3.69%, stearic (28.00%, oleic (12.45%, linoleic (8.90%, arachidic (0.71% and gadoleic acids (0.65%.

  4. Bio oil from pyrolysis of cashew nut shell-characterisation and related properties

    International Nuclear Information System (INIS)

    Das, Piyali; Sreelatha, T.; Ganesh, Anuradda

    2004-01-01

    Biomass in the form of cashew nut shell represents a renewable and abundant source of energy in India. Cashew nut shell (CNS) was pyrolysed in a fixed bed pyrolysis reactor under vacuum. The CNS on heating upto 175 deg. C produced dark brown oil (oil CO1), which was extracted, and the CNS, after the removal of oil CO1, was pyrolysed under vacuum. The pyrolysis vapours were condensed to get a combustible oil fraction (oil CO2) as well as a noncombustible aqueous fraction. The detailed chemical compositional analysis of both the oils as well as aqueous fractions were carried out by various techniques like liquid column chromatography 1 HNMR, 13 CNMR, FTIR, GC-MS. The CNS oils (CO1 and CO2) were found to be a renewable natural resource of unsaturated phenols with long linear chains and marked absence of anacardic acid. Unlike other bio oils, the CNS oils have been found to be fairly stable. The oils were completely miscible in diesel and were found to have low corrosivity towards Copper and Stainless steel, and thus promise to be a potential fuel

  5. Color and chemical properties of oil used for deep frying on a large scale.

    Science.gov (United States)

    Totani, Nagao; Tateishi, Sayuri; Chiue, Hiroko; Mori, Terutosi

    2012-01-01

    Acid value (AV), polar compound content (PC), carbonyl value (CV) and Gardner color of oil used for deep-frying in kitchens at a supermarket, lunch chain store, restaurant, eating house, and hospital were analyzed. All AVs obtained but one (3.38) were within the limit set by the Food Sanitation Act of Japan (AV ≤ 3, peroxide value ≤ 30). However, some oil samples had a PC over 25%, which is beyond the limit legislated by some European countries. When the relation between the Gardner color and the AV, PC, or CV of the oil was investigated, well correlated logarithmic regression curves were obtained from the oil of all kitchens except the hospital kitchen. However, the use of lard-containing canola oil without oil replenishment in the eating house increased color values rapidly. All of the values obtained from pure vegetable oil used almost daily were plotted on a graph. It was found that kitchen-by-kitchen differences in fryer, vegetable oil, frying temperature, heating time, and amounts and kinds of foods fried did not influence the relation between Gardner color value versus AV, PC or CV. In conclusion, frying vegetable oil used in large-scale kitchens without official inspection can be better controlled with Gardner color determination by the operators and administrators. This would improve the quality of the oil ingested by facility patrons.

  6. Effect of oil extraction assisted by ultrasound on the physicochemical properties and fatty acid profile of pumpkin seed oil (Cucurbita pepo).

    Science.gov (United States)

    Hernández-Santos, Betsabé; Rodríguez-Miranda, Jesús; Herman-Lara, Erasmo; Torruco-Uco, Juan G; Carmona-García, Roselis; Juárez-Barrientos, José M; Chávez-Zamudio, Rubí; Martínez-Sánchez, Cecilia E

    2016-07-01

    The effects of amplitude and time of ultrasound-assisted extraction on the physicochemical properties and the fatty acid profile of pumpkin seed oil (Cucurbita pepo) were evaluated. Ultrasound time (5-30 min) and the response variables amplitude (25-100%), extraction yield, efficiency, oxidative stability in terms of the free fatty acids (FFA) of the plant design comprising two independent experiments variables, peroxide (PV), p-anisidine (AV), totox value (TV) and the fatty acid profile were evaluated. The results were analyzed by multiple linear regression. The time and amplitude showed significant differences (P<0.05) for all variables. The highest yield of extraction was achieved at 5 min and amplitude of 62.5% (62%). However, the optimal ultrasound-assisted extraction conditions were as follows: ultrasound time of 26.34 min and amplitude of 89.02%. All extracts showed low FFA (2.75-4.93% oleic acid), PV (1.67-4.68 meq/kg), AV (1.94-3.69) and TV (6.25-12.55) values. The main fatty acids in all the extracts were oleic and linoleic acid. Therefore, ultrasound-assisted oil extraction had increased performance and reduced extraction time without affecting the oil quality. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Paradoxical effect of a pequi oil-rich diet on the development of atherosclerosis: balance between antioxidant and hyperlipidemic properties

    International Nuclear Information System (INIS)

    Aguilar, E.C.; Jascolka, T.L.; Teixeira, L.G.; Lages, P.C.; Ribeiro, A.C.C.; Vieira, E.L.M.; Peluzio, M.C.G.; Alvarez-Leite, J.I.

    2012-01-01

    Pequi is the fruit of Caryocar brasiliense and its oil has a high concentration of monounsaturated and saturated fatty acids, which are anti- and pro-atherogenic agents, respectively, and of carotenoids, which give it antioxidant properties. Our objective was to study the effect of the intake of a cholesterol-rich diet supplemented with pequi oil, compared to the same diet containing soybean oil, on atherosclerosis development, and oxidative stress in atherosclerosis-susceptible LDL receptor-deficient mice (LDLr −/− , C57BL/6-background). Female mice were fed a cholesterol-rich diet containing 7% soybean oil (Soybean group, N = 12) or 7% pequi oil (Pequi group, N = 12) for 6 weeks. The Pequi group presented a more atherogenic lipid profile and more advanced atherosclerotic lesions in the aortic root compared to the Soybean group. However, the Pequi group presented a less advanced lesion in the aorta than the Soybean group and showed lower lipid peroxidation (Soybean group: 50.2 ± 7.1; Pequi group: 30.0 ± 4.8 µmol MDA/mg protein) and anti-oxidized LDL autoantibodies (Soybean group: 35.7 ± 9.4; Pequi group: 15.6 ± 3.7 arbitrary units). Peritoneal macrophages from the Pequi group stimulated with zymosan showed a reduction in the release of reactive oxygen species compared to the Soybean group. Our data suggest that a pequi oil-rich diet slows atherogenesis in the initial stages, possibly due to its antioxidant activity. However, the increase of serum cholesterol induces a more prominent LDL migration toward the intimae of arteries, increasing the advanced atherosclerotic plaque. In conclusion, pequi oil associated with an atherogenic diet worsens the lipid profile and accelerates the formation of advanced atherosclerotic lesions despite its antioxidant action

  8. Paradoxical effect of a pequi oil-rich diet on the development of atherosclerosis: balance between antioxidant and hyperlipidemic properties

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar, E.C. [Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, MG (Brazil); Jascolka, T.L. [Faculdade de Farmácia, Universidade Federal de Minas Gerais, Belo Horizonte, MG (Brazil); Teixeira, L.G.; Lages, P.C.; Ribeiro, A.C.C.; Vieira, E.L.M. [Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, MG (Brazil); Peluzio, M.C.G. [Departamento de Nutrição, Universidade Federal de Viçosa, Viçosa, MG (Brazil); Alvarez-Leite, J.I. [Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, MG (Brazil)

    2012-05-11

    Pequi is the fruit of Caryocar brasiliense and its oil has a high concentration of monounsaturated and saturated fatty acids, which are anti- and pro-atherogenic agents, respectively, and of carotenoids, which give it antioxidant properties. Our objective was to study the effect of the intake of a cholesterol-rich diet supplemented with pequi oil, compared to the same diet containing soybean oil, on atherosclerosis development, and oxidative stress in atherosclerosis-susceptible LDL receptor-deficient mice (LDLr{sup −/−}, C57BL/6-background). Female mice were fed a cholesterol-rich diet containing 7% soybean oil (Soybean group, N = 12) or 7% pequi oil (Pequi group, N = 12) for 6 weeks. The Pequi group presented a more atherogenic lipid profile and more advanced atherosclerotic lesions in the aortic root compared to the Soybean group. However, the Pequi group presented a less advanced lesion in the aorta than the Soybean group and showed lower lipid peroxidation (Soybean group: 50.2 ± 7.1; Pequi group: 30.0 ± 4.8 µmol MDA/mg protein) and anti-oxidized LDL autoantibodies (Soybean group: 35.7 ± 9.4; Pequi group: 15.6 ± 3.7 arbitrary units). Peritoneal macrophages from the Pequi group stimulated with zymosan showed a reduction in the release of reactive oxygen species compared to the Soybean group. Our data suggest that a pequi oil-rich diet slows atherogenesis in the initial stages, possibly due to its antioxidant activity. However, the increase of serum cholesterol induces a more prominent LDL migration toward the intimae of arteries, increasing the advanced atherosclerotic plaque. In conclusion, pequi oil associated with an atherogenic diet worsens the lipid profile and accelerates the formation of advanced atherosclerotic lesions despite its antioxidant action.

  9. Paradoxical effect of a pequi oil-rich diet on the development of atherosclerosis: balance between antioxidant and hyperlipidemic properties

    Directory of Open Access Journals (Sweden)

    E.C. Aguilar

    2012-07-01

    Full Text Available Pequi is the fruit of Caryocar brasiliense and its oil has a high concentration of monounsaturated and saturated fatty acids, which are anti- and pro-atherogenic agents, respectively, and of carotenoids, which give it antioxidant properties. Our objective was to study the effect of the intake of a cholesterol-rich diet supplemented with pequi oil, compared to the same diet containing soybean oil, on atherosclerosis development, and oxidative stress in atherosclerosis-susceptible LDL receptor-deficient mice (LDLr-/-, C57BL/6-background. Female mice were fed a cholesterol-rich diet containing 7% soybean oil (Soybean group, N = 12 or 7% pequi oil (Pequi group, N = 12 for 6 weeks. The Pequi group presented a more atherogenic lipid profile and more advanced atherosclerotic lesions in the aortic root compared to the Soybean group. However, the Pequi group presented a less advanced lesion in the aorta than the Soybean group and showed lower lipid peroxidation (Soybean group: 50.2 ± 7.1; Pequi group: 30.0 ± 4.8 µmol MDA/mg protein and anti-oxidized LDL autoantibodies (Soybean group: 35.7 ± 9.4; Pequi group: 15.6 ± 3.7 arbitrary units. Peritoneal macrophages from the Pequi group stimulated with zymosan showed a reduction in the release of reactive oxygen species compared to the Soybean group. Our data suggest that a pequi oil-rich diet slows atherogenesis in the initial stages, possibly due to its antioxidant activity. However, the increase of serum cholesterol induces a more prominent LDL migration toward the intimae of arteries, increasing the advanced atherosclerotic plaque. In conclusion, pequi oil associated with an atherogenic diet worsens the lipid profile and accelerates the formation of advanced atherosclerotic lesions despite its antioxidant action.

  10. Different Oils and Health Benefit Statements Affect Physicochemical Properties, Consumer Liking, Emotion, and Purchase Intent: A Case of Sponge Cake.

    Science.gov (United States)

    Poonnakasem, Naratip; Pujols, Kairy Dharali; Chaiwanichsiri, Saiwarun; Laohasongkram, Kalaya; Prinyawiwatkul, Witoon

    2016-01-01

    Effects of different oils on physicochemical properties, consumer liking, emotion, and purchase intent of sponge cakes were evaluated. Three healthy oils (extra virgin coconut oil, EVCO; extra virgin olive oil, EVOO; rice bran oil, RBO) compared with butter (the control), were used at 20% (w/w, wheat flour basis) in sponge cake formulations. Five positive (calm, good, happy, pleased, satisfied) and 3 negative (guilty, unsafe, worried) emotion terms, selected from the EsSense Profile(®) with slight modification using an online (N = 234) check-all-that-apply questionnaire, were used for consumer testing. Consumers (N = 148) evaluated acceptability of 9 sensory attributes on a 9-point hedonic scale, 8 emotion responses on a 5-point rating scale, and purchase intent on a binomial scale. Overall liking, emotion, and purchase intent were evaluated before compared with after health benefit statement of oils had been given to consumers. Overall liking and positive emotion (except calm) scores of sponge cake made with EVCO were higher than those made with EVOO and RBO. Specific volume, expansion ratio, and moisture content of control, EVCO, and EVOO were not significantly different, but higher than RBO sponge cake. JAR results showed that sponge cake made with RBO had the least softness that was reflected by the highest hardness (6.61 to 9.69 compared with. 12.76N). Oil (EVCO/EVOO/RBO) health benefit statement provided to consumer significantly increased overall liking, positive emotion, and purchase intent scores while decreased negative emotion scores. Overall liking and pleased emotion were critical attributes influencing purchase intent (odds ratio = 2.06 to 3.75), whereas calm and happy became not critical after health benefit statement had been given. © 2015 Institute of Food Technologists®

  11. Physical, chemical and microbiological properties of mixed hydrogenated palm kernel oil and cold-pressed rice bran oil as ingredients in non-dairy creamer

    Directory of Open Access Journals (Sweden)

    Kunakorn Katsri

    2014-02-01

    Full Text Available The physical, chemical and microbiological properties of hydrogenated palm kernel oil (PKO and cold-pressed rice bran oil (RBOas ingredients in the production of liquid and powdered non-dairy creamer (coffee whitener were studied. The mixing ratios between hydrogenated PKO and cold-pressed RBO were statistically designed as of 100:0, 90:10,80:20, 70:30, 60:40, 50:50, 40:60, 30:70, 20:80, 10:90 and 0:100.The color, absorbanceand viscosity of the mixtures were investigated. As the ratio of cold-pressed RBO increased, the color became darker (L*of 93.06 to 86.25 and the absorbance significantly increased, while the viscosity of the mixtures of 20:80, 10:90 and 0:100 (54 cp. were the highest amongst the ratios tested.The hydrogenated PKO and cold-pressed RBO mixtures were further chemically tested for fatty acids, -oryzanol, -tocopherol, trans-fat contents andantioxidant activity. There were 10 fatty acids present in hydrogenated PKO with saturated fatty acid being the most predominant. Comparatively, there were only 5 fatty acids found in cold-pressed RBO with monounsaturated fatty acid being the major fatty acid. -Oryzanol and -tocopherol contents were higher with increasingcold-pressed RBO from 0-100% (0 to 1,155.00 mg/100g oil and 0.09 to 30.82 mg/100g oil, respectively. Antioxidant activity was increased with increasing cold-pressed RBO from 0-100% (9.26 to 94.24%.The pure hydrogenated PKO contained higher trans-fat content than that of the 90:10 and 80:20 mixtures (2.73, 1.93 and 1.85mg/100g oil,respectively while other samples had no trans-fat. No microorganisms were present in any of the samples.Therefore, substitution of hydrogenated PKO by cold-pressed RBO from 30-100% would offer more nutritional values and better chemical and physical properties of non-dairy creamer.

  12. Some Qualitative and Rheological Properties of Virgin Olive Oil- Apple Vinegar Salad Dressing Stabilized With Xanthan Gum

    Directory of Open Access Journals (Sweden)

    Solmaz Abedinzadeh

    2016-12-01

    Full Text Available Purpose: Lipid oxidation and rheological properties are the main qualitative parameters determined in food emulsions. Salad dressings are food emulsions important in our daily diet, but conventional salad dressings have high amounts of cholesterol and saturated fatty acids because of egg yolk in their formulations. There are many studies on the modification of salad dressing formulations to replace egg yolk and saturated fats. The present study describes new formulation of salad dressing with olive oil and apple vinegar to produce a functional food product. Methods: This study investigated the qualitative properties, oxidative stability, rheological behavior and microstructure of the salad dressing without egg yolk. Oil-in-water emulsions were prepared with virgin olive oil and apple vinegar stabilized with various percentages of xanthan (T1: 0.25%, T2: 0.5%. T3: 0.75%. Samples were stored at refrigerator for 90 days and experiments were performed at production day and during storage. Results: The obtained results showed that peroxide value was increased for all samples during storage, but it was at an acceptable level. Fatty acid changes were not significant during storage. Droplet size was reduced by increasing xanthan gum. T2 had the best rheological properties during storage. Generally, T2 and T3 had higher scores and were more acceptable in organoleptic assay. Conclusion: Obtained results showed that T2 had suitable qualitative and rheological properties and can be a proper egg yolk free salad dressing to introduce to the market.

  13. Palm oil based biofuel using blended crude palm oil/medium fuel oil: physical and thermal properties studies. Paper no. IGEC-1-015

    International Nuclear Information System (INIS)

    Chuah, T.G.; Zakiah, M.; Wan Hasamuddin, W.H.; Hj. Ahmad, H.; Fakhru'l-Razi, A.; Robiah, Y.; Choong, T.S.Y.; Yip, Y.F.

    2005-01-01

    Crude Palm Oil (CPO) is renewable bio-based resource. It is an attractive alternative fuel which provides the potential to reduce emission problems. CPO is an example of biofuels that can be blended with petroleum distillates as a fuel in mobile engines and industrial processes to help offset the increasing energy demand. This paper highlights the results of blended Crude Palm Oil (CPO)/Medium Fuel Oil (MFO) as an alternative environmentally friendly boiler's fuel. Heating values of the blend fuels have been measured using an oxygen bomb calorimeter. Combustion performance of a blend containing 50% CPO in MFO fuel was examined using a commercial boiler. The blend burned satisfactorily without major modification to the appliance and fuel delivery system. SO 2 emissions were 51.67% lower than MFO, H 2 S decreased about 55.61% while NO x were 18.67% reduced. Results indicate potential reductions of SO 2 , H 2 S and NO x , and greenhouse gas emissions for the petroleum distillates can be replaced with this blend. (author)

  14. Castor Oil: Properties, Uses, and Optimization of Processing Parameters in Commercial Production.

    Science.gov (United States)

    Patel, Vinay R; Dumancas, Gerard G; Kasi Viswanath, Lakshmi C; Maples, Randall; Subong, Bryan John J

    2016-01-01

    Castor oil, produced from castor beans, has long been considered to be of important commercial value primarily for the manufacturing of soaps, lubricants, and coatings, among others. Global castor oil production is concentrated primarily in a small geographic region of Gujarat in Western India. This region is favorable due to its labor-intensive cultivation method and subtropical climate conditions. Entrepreneurs and castor processors in the United States and South America also cultivate castor beans but are faced with the challenge of achieving high castor oil production efficiency, as well as obtaining the desired oil quality. In this manuscript, we provide a detailed analysis of novel processing methods involved in castor oil production. We discuss novel processing methods by explaining specific processing parameters involved in castor oil production.

  15. Effects of the addition of oil shale ash and coal ash on physic-chemical properties of CPJ45 cement

    Directory of Open Access Journals (Sweden)

    Nabih K.

    2014-04-01

    Full Text Available We focused our research on recycling industrial wastes, fly ash (F.A, bottom ash (B.A and oil shale ash (S.A in cement production. The study concerns physico-chemical characterization of these products and the influence of their addition on the mechanical proprieties of the CPJ45 cement. XRF allowed us to rank the three additives used according to their contents on major oxides. Coal ashes belong to the class F, and thus possess poozzolanic properties and oil shale ash belongs to the class C and possesses hydraulic and poozolanic properties. The crystalline phases constituting each ash were analysed by XRD. We observe in bottom ash the presence of quartz and mullite. The same crystals are found in fly ash with hematite and magnetite. Oil shale ash is composed of quartz, anhydrite, gehlenite, wollastonite and periclase. The microstructures of fly ash and bottom ash were studied using SEM. The bottom ash was composed respectively of fine particles that are generally irregularly shaped, their dimensions are between 5 and 28μm and of big particles(300 μm. The EDX analysis coupled with an electronic microscope provided some information about the major elements that constitute our samples. The dehydrations of anhydrous and three days hydrated cement were examined by DSC. For hydrated cements we noticed endothermic peaks related to the dehydration of CSH, CH and decomposition of carbonates. The study of the mechanical properties of CPJ45 cement by adding different proportions of fly ash, bottom ash and oil shale ash helped clarifying the percentage of ash that leaded to improve the 28 days mechanical strength. The results show that the cements studied have their maximum mechanical resistance with the addition at 7% of fly ash or 10% of oil shale ash.

  16. In-situ burning of oil spills: Review and research properties

    International Nuclear Information System (INIS)

    Fingas, M.

    1992-01-01

    In-situ burning of oil spills has been tried over the past thirty years but has never been fully-accepted as an oil-spill cleanup option - largely because of the lack of understanding of the combustion products and the principles governing the combustibility of oil-on-water. Extensive research is currently underway to understand the many facets of burning oil. A consortium of over 15 agencies in the United States and Canada have joined forces to study burning and to conduct large scale experiments. This effort will result in data which should lead to broader acceptance of in-situ burning as an acceptable spill countermeasures alternative. Burning has distinct advantages over other counter-measures. First and foremost, it offers the potential to rapidly remove large quantities of oil. In-situ burning has the potential to remove as much oil in one day as several mechanical devices could in one month. Application of in-situ burning could prevent a large amount of shoreline contamination and damage to biota by removing oil before it spreads and moves to other areas. Secondly, in-situ burning requires minimal equipment and much less labor than any other technique. It can be applied in areas where other methods cannot be used because of distances and lack of infra-structure. Thirdly, burning of oil is a final solution compared to mechanical recovery. When oil is recovered mechanically it still has to be transported, stored and disposed of. Fourth and finally, burning may be the only option available in certain situations. Oil amongst ice and on ice are examples of situations where practical alternatives to burning do not exist. There are disadvantages to burning. The first and most visible disadvantage is the large black smoke plume that burning oil produces. The second disadvantage is that the oil must be a minimum thickness to burn

  17. CHEMICAL COMPOSITION, ANTIOXIDANT AND ANTIMICROBIAL PROPERTIES OF THREE ESSENTIAL OILS FROM PORTUGUESE FLORA

    OpenAIRE

    Martins, M. Rosário; Tinoco, M. Teresa; Almeida, A. S.; Cruz-Morais, J.

    2012-01-01

    The present work reports on the evaluation of chemical composition and antioxidant and antimicrobial activities of essential oils of three aromatic herbs, growing wild in the south of Portugal, used in traditional food preparations: Foeniculum vulgare, Mentha spicata and Rosmarinus officinalis. The principal components of essential oils were anethole (41.2%) for F. vulgare, carvone (41.1%) for M. spicata and myrcene (23.7%) for R. officinalis. Essential oils showed antioxidant activity eit...

  18. Investigation of the Physical and Molecular Properties of Asphalt Binders Processed with Used Motor Oils

    Directory of Open Access Journals (Sweden)

    Mohyeldin Ragab

    2015-01-01

    Full Text Available In this work we investigated the performance aspects of addition of used motor oils (UMO to neat and crumb rubber modified asphalts (CRMA and related that to the change of molecular size distribution of modified asphalt’s fractions; asphaltenes, saturates, naphthene aromatics, and polar aromatics. Based on the results of temperature sweep viscoelastic tests, addition of crumb rubber modifier (CRM alone or with UMO results in the formation of internal network within the modified asphalt. Based on the results of short and long term aged asphalts, the utilization of combination of UMO and CRM enhanced the aging behavior of asphalt. Bending beam rheometer was utilized to investigate the low temperature behavior of UMO modified asphalts. Based on those tests, the utilization of the UMO and CRM enhanced the low temperature properties of asphalts. Based on the results of the asphalt separation tests and the Gel Permeation Chromatography (GPC analysis, it was found that saturates and naphthene aromatics are the two asphalt fractions that have similar molecular size fractions as those of UMO. However, UMO only shifts the molecular sizes of saturates after interaction with asphalt. Results also show that polar aromatics pose higher molecular size structures than UMO.

  19. Effect of soot on oil properties and wear of engine components

    International Nuclear Information System (INIS)

    Green, D A; Lewis, R

    2007-01-01

    The objective of the work outlined in this paper was to increase the understanding of the wear mechanisms that occur within a soot contaminated contact zone, to help in future development of a predictive wear model to assist in the automotive engine valve train design process. The paper builds on previous work by the author, through testing of different lubricants and increased levels of soot contamination. Wear testing has been carried out using specimens operating under realistic engine conditions, using a reciprocating test-rig specifically designed for this application, where a steel disc is held in a heated bath of oil and a steel ball is attached to a reciprocating arm (replicating a sliding elephant's foot valve train contact). Detailed analysis of the test specimens has been performed using scanning electron microscopy to identify wear features relating to the proposed wear mechanisms. Analysis of worn engine components from durability engine tests has also been carried out for a comparison between specimen tests and engine testing. To assist the understanding of the wear test results obtained, the physical properties of contaminated lubricants were investigated, through viscosity, traction and friction measurements. The results have revealed how varying lubrication conditions change the wear rate of engine components and determine the wear mechanism that dominates in specific situations. Testing has also shown the positive effects of advanced engine lubricants to reduce the amount of wear produced with soot present

  20. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2013-02-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  1. Spatial variation of peat soil properties in the oil-producing region of northeastern Sakhalin

    Science.gov (United States)

    Lipatov, D. N.; Shcheglov, A. I.; Manakhov, D. V.; Zavgorodnyaya, Yu. A.; Rozanova, M. S.; Brekhov, P. T.

    2017-07-01

    Morphology and properties of medium-deep oligotrophic peat, oligotrophic peat gley, pyrogenic oligotrophic peat gley, and peat gley soils on subshrub-cotton grass-sphagnum bogs and in swampy larch forests of northeastern Sakhalin have been studied. Variation in the thickness and reserves of litters in the studied bog and forest biogeocenoses has been analyzed. The profile distribution and spatial variability of moisture, density, ash, and pHKCl in separate groups of peat soils have been described. The content and spatial variability of petroleum hydrocarbons have been considered in relation to the accumulation of natural bitumoids by peat soils and the technogenic pressing in the oil-producing region. Variation of each parameter at different distances (10, 50, and 1000 m) has been estimated using a hierarchical sampling scheme. The spatial conjugation of soil parameters has been studied by factor analysis using the principal components method and Spearman correlation coefficients. Regression equations have been proposed to describe relationships of ash content with soil density and content of petroleum hydrocarbons in peat horizons.

  2. Physical, structural and thermomechanical properties of oil palm nano filler/kenaf/epoxy hybrid nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Saba, N., E-mail: naheedchem@gmail.com [Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products(INTROP), Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Paridah, M.T. [Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products(INTROP), Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Abdan, K. [Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang Selangor (Malaysia); Ibrahim, N.A. [Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia)

    2016-12-01

    The present research study deals with the fabrication of kenaf/epoxy hybrid nanocomposites by the incorporation of oil palm nano filler, montmorillonite (MMT) and organically modified montmorillonite (OMMT) at 3% loading, through hand lay-up technique. Effect of adding different nano fillers on the physical (density), structural [X-ray diffraction (XRD)] and thermomechanical analysis (TMA) of kenaf/epoxy composites were carried out. Density results revealed that the incorporation of nano filler in the kenaf/epoxy composites increases the density which in turn increases the hardness of the hybrid nanocomposites. XRD analysis confirmed the presence of nano fillers in the structure of their respective fabricated hybrid nanocomposites. All hybrid nanocomposites displayed lower coefficient of thermal expansion (CTE) with respect to kenaf/epoxy composites. Overall results predicted that the properties improvement in nano OPEFB/kenaf/epoxy was quite comparable to MMT/kenaf/epoxy but relatively lesser to OMMT/kenaf/epoxy hybrid nanocomposites and higher with respect to kenaf/epoxy composites. The improvement ascribed due to improved interfacial bonding or cross linking between kenaf fibers and epoxy matrix by addition of nano filler. - Highlights: • Nano OPEFB/kenaf/epoxy hybrid nanocomposites were fabricated by hand lay-up. • Effect of nano OPEFB on density & structure of kenaf/epoxy were investigated. • Thermal expansion coefficients of kenaf/epoxy and hybrid nanocomposites evaluated. • Comparative studies were made with MMT and OMMT kenaf/epoxy hybrid nanocomposites.

  3. Evaluation of physical and chemical properties and their interactions in fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Gross, Martin A; Jensen, Jeanette L; Gracz, Hanna S; Dancer, Jens; Keener, Kevin M

    2017-10-15

    Fat, oil and grease (FOG) blockages in sewer systems are a substantial problem in the United States. It has been estimated that over 50% of sewer overflows are a result of FOG blockages. In this work, a thorough laboratory study was undertaken to examine key variables that contribute to FOG deposit formation under controlled conditions. Physical and chemical properties and their interactions were evaluated and conditions that generated deposits that mimicked field FOG deposits were identified. It was found that 96 of the of 128 reaction conditions tested in the laboratory formed FOG deposits with similar physical and chemical characteristics as field FOG deposits. It was also found that FOG deposits can be created through fatty acid crystallization and not just saponification. Furthermore FOG deposits were found to be more complex than previously documented and contain free fatty acids, fatty acid metal salts, triacylglycerol's, diacylglycerol's and, monoacylglycerol's. Lastly it was found that FOG deposits that only contained saturated fatty acids were on average 2.1 times higher yield strength than deposits that contained unsaturated fatty acids. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Physicochemical and sensory properties of ice-cream formulated with virgin coconut oil.

    Science.gov (United States)

    Choo, S Y; Leong, S K; Henna Lu, F S

    2010-12-01

    The substitution of milk fat with virgin coconut oil (VCO) was used to produce nutritious ice cream with pleasant coconut flavor and aroma. Three formulations were developed whereby formulation VCO4, VCO8 and VCO12 was substituted with 4%, 8% and 12% of VCO, respectively. The physicochemical properties of ice creams analyzed include overrun, meltdown, pH, titratable acidity, total solid, protein and fat content. The fatty acids profile of VCO formulated ice creams and their stabilities over 3 and 6 weeks storage were studied respectively using gas chromatography (GC). Qualitative descriptive analysis (QDA) and consumer affective test were performed among the trained and untrained panelists. Significant differences (p ice cream formulations were observed except titratable acidity. Increased VCO content in ice cream formulations lowered the melting resistance of ice cream. For GC analysis, the major fatty acid identified was lauric acid. Upon storage time, the concentration of unsaturated fatty acid decreased but the concentration of saturated fatty acid increased. The result of QDA showed that formulation VCO4, VCO8 and VCO12 were significantly (p ice cream. Formulation VCO12 was highly accepted by panelists in terms of the acceptance level of appearance, aroma, texture, flavor and overall acceptability. Hence, it has a potential marketable value.

  5. Evaluation of the Properties of Iron Oxide-Filled Castor Oil Polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2012-01-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  6. Properties of Lignin from Oil Palm Empty Fruit Bunch and Its Application for Plywood Adhesive

    Directory of Open Access Journals (Sweden)

    Lucky Risanto

    2014-10-01

    Full Text Available Lignin from lignocellulosic biomass is a potential biopolymer for wood adhesive. The aims of this study were to characterize lignin isolated from the black liquor of oil palm empty fruit bunch fiber pretreated with steam explosion in alkaline conditions and to examine the bond quality of aqueous polymer isocyanate (API adhesive prepared from lignin, natural rubber latex (NRL, and polyvinyl alcohol (PVA as base polymers with isocyanate crosslinkers. Lignin was precipitated from the black liquor by adding hydrochloric acid; then the precipitate was separated by filtration, thoroughly washed with water up to pH 2 and pH 5, and dried. The isolated lignin was characterized by ultimate analysis, UV spectroscopy, FT-IR spectroscopy, and thermal analysis. Three-layer plywood samples were prepared, and the bond strengths of the plywood samples were determined in dry conditions and after cyclic boiling. The lignin isolates with different pH values did not have significantly different chemical and thermal properties. Both lignin isolates had similar C, H, and O contents, identical functional groups in the FTIR spectra, similar absorption in the UV spectra, and high decomposition temperatures. The base polymers composition that could produce API adhesive for exterior applications was NRL/PVA/lignin (4/4/2. The use of more lignin in the adhesive formulation decreased the bond strength of the plywood.

  7. Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition

    Science.gov (United States)

    Zhang, Baosen; Dong, Qiangsheng; Ba, Zhixin; Wang, Zhangzhong; Shi, Hancheng; Xue, Yanting

    2018-01-01

    Plasma nitriding was conducted as post-treatment for surface texture on pure titanium to obtain a continuous nitriding layer. Supersonic fine particles bombarding (SFPB) was carried out to prepare surface texture. The surface morphologies and chemical composition were analyzed using scanning electron microscope and energy disperse spectroscopy. The microstructures of modified layers were characterized by transmission electron microscope. The tribological properties of surface-textured and duplex-treated pure titanium under oil lubrication condition were systematically investigated in the ball-on-plate reciprocating mode. The effects of applied load and sliding velocity on the tribological behavior were analyzed. The results show that after duplex treatments, the grains size in modified layer becomes slightly larger, and hardness is obviously improved. Wear resistance of duplex-treated pure titanium is significantly improved referenced to untreated and surface-textured pure titanium, which is 3.22 times as much as untreated pure titanium and 2.15 times of that for surface-textured pure titanium, respectively.

  8. Physical, structural and thermomechanical properties of oil palm nano filler/kenaf/epoxy hybrid nanocomposites

    International Nuclear Information System (INIS)

    Saba, N.; Paridah, M.T.; Abdan, K.; Ibrahim, N.A.

    2016-01-01

    The present research study deals with the fabrication of kenaf/epoxy hybrid nanocomposites by the incorporation of oil palm nano filler, montmorillonite (MMT) and organically modified montmorillonite (OMMT) at 3% loading, through hand lay-up technique. Effect of adding different nano fillers on the physical (density), structural [X-ray diffraction (XRD)] and thermomechanical analysis (TMA) of kenaf/epoxy composites were carried out. Density results revealed that the incorporation of nano filler in the kenaf/epoxy composites increases the density which in turn increases the hardness of the hybrid nanocomposites. XRD analysis confirmed the presence of nano fillers in the structure of their respective fabricated hybrid nanocomposites. All hybrid nanocomposites displayed lower coefficient of thermal expansion (CTE) with respect to kenaf/epoxy composites. Overall results predicted that the properties improvement in nano OPEFB/kenaf/epoxy was quite comparable to MMT/kenaf/epoxy but relatively lesser to OMMT/kenaf/epoxy hybrid nanocomposites and higher with respect to kenaf/epoxy composites. The improvement ascribed due to improved interfacial bonding or cross linking between kenaf fibers and epoxy matrix by addition of nano filler. - Highlights: • Nano OPEFB/kenaf/epoxy hybrid nanocomposites were fabricated by hand lay-up. • Effect of nano OPEFB on density & structure of kenaf/epoxy were investigated. • Thermal expansion coefficients of kenaf/epoxy and hybrid nanocomposites evaluated. • Comparative studies were made with MMT and OMMT kenaf/epoxy hybrid nanocomposites.

  9. Engineering Geological Properties of Oil-Contaminated Granitic and Meta sedimentary Soils

    International Nuclear Information System (INIS)

    Zulfahmi Ali Rahman; Umar Hamzah; Noorulakma Ahmad

    2011-01-01

    Hydrocarbon is a light-non aqueous phase liquid or known as LNAPL. It poses environmental hazard if accidentally spilled out into the soil and water systems as a result of its insoluble nature in water. LNAPL component infiltrates into soil through pore spaces and afloat at the top of groundwater level. Some of this hydrocarbon would trap and clog within the voids, difficult to remove and costly to clean. The occurrence of hydrocarbon in the soil definitely degraded the behaviour of soils in terms of engineering properties. This study aimed to investigate the engineering properties of oil-contaminated soil for two different residual soils originally developed from in-situ weathering of granitic and meta sedimentary rocks. The physical characterisations of the soil were determined including particle size distribution, specific gravity test and x-ray diffraction (XRD). The engineering parameters for the contaminated and uncontaminated soils were Atterberg limits, compaction and soil shear strength (UU tests). The amounts of hydrocarbon added to soil were varied at 0 %, 4 %, 8 %, 12 % and 16 % of dried weight of soil samples. The results from the particle size distribution analysis showed that residual soil from granitic rock comprises of 38 % sand, 33 % silt and 4 % clay while meta sedimentary soil consists of 4 % sand, 43 % silt dan 29 % clay. The mean values of specific gravity for the granitic and meta sedimentary soils were 2.56 and 2.61, respectively. The types of minerals present in granitic soil sample were quartz, kaolinite and gibbsite while meta sedimentary soil consists of quartz and kaolinite. The Atterberg limits value decreased as a result of increasing amount of added hydrocarbon into the soil. A similar behavior was observed with the values of maximum dry density and optimum water content with increasing hydrocarbon content. The overall unconsolidated undrained shear strength, C u showed a decreasing trend with the increase in hydrocarbon content

  10. Influence of Cu, TiO2 Nanoparticles and Carbon Nano-Horns on Tribological Properties of Engine Oil.

    Science.gov (United States)

    Zin, V; Agresti, F; Barison, S; Colla, L; Fabrizio, M

    2015-05-01

    The addition of nanoparticles in lubricating oils recently demonstrated to reduce the coefficient of friction and to increase the load-carrying capability of lubricant in coupled surfaces. In this work, different kinds of nanoparticles were tested as additives to engine oil to improve lubrication: copper and titanium oxide nanoparticles and single walled carbon nanohorns (SWCNHs). Two nanoparticle sizes were also tested in case of copper. The tribological properties of these nanofluids were evaluated by Stribeck tests, in order to compare the effect of nanoparticles on friction coefficient and electric contact resistance in different lubrication regimes. Stribeck curves showed that the coefficient of friction was reduced, compared to raw oil, by the action of Cu nanoparticles having 130 nm diameter, leading to a mean decrease of about 17%, and by SWCNHs, with a mean decrease of about 12%. Conversely, no significant changes were detected in presence of Cu nanoparticles having 50 nm diameter or of TiO2. The suspension viscosity and stability were also tested. Wear tests were also carried out, showing a reduction of wear rate up to nearly 50% for Cu nanoparticles (150 nm diameter) and around 30% for SWCNHs. The measurements showed that nanoparticles having size comparable to the mean roughness of coupled surfaces significantly improved the tribological properties of bare oil. An explanation of nanoparticle action is proposed.

  11. Pyrolysis oil production, properties, and utilization; Pyrolyysioeljyn valmistus, ominaisuudet ja kaeyttoe

    Energy Technology Data Exchange (ETDEWEB)

    Sipilae, K; Oasmaa, A; Arpiainen, V; Kuoppala, E; Leppaemaeki, E; Solantausta, Y; Levander, J. VTT Energia

    1996-12-31

    The main tasks for 1995 were: design and assembling of experimental reactors, and physical and chemical characterisation of pyrolysis oils. A PDU-unit (20 kg/h) has been designed and it will be assembled in April 1996. A 1 kg/h pyrolyzer has been constructed with a hot-filtration system (a ceramic candle filter) and direct quenching with a hydrocarbon oil. The equipment has worked well. Pine saw dust has been used as a feed and a good-quality solids-free product oil has been obtained. In addition to this, a smaller (150 g/h) pyrolyzer has been bought from Canada (University of Waterloo). The small equipment will be used for example for catalytic upgrading of pyrolysis vapours. Chemical characterisation of pyrolysis oil has been carried out 1995. Water extraction has been developed for a fractionation method. Pyrolysis oil samples produced from mixed hardwood, eucalyptus and straw have been employed. The objective of the study has been to develop a simple characterisation method for comparison of different pyrolysis oils. For example reactive compounds have been identified. Main analytical method for analysing the water-soluble fraction has been GC-MS. The research will be continued 1996. A literature review of chemical and physical characterization of pyrolysis oils has been published 1995. Testing of fuel oil analyses has been continued within the IEA pyrolysis project. VTT Energy is responsible for fuel oil analytical methods

  12. Pyrolysis oil production, properties, and utilization; Pyrolyysioeljyn valmistus, ominaisuudet ja kaeyttoe

    Energy Technology Data Exchange (ETDEWEB)

    Sipilae, K.; Oasmaa, A.; Arpiainen, V.; Kuoppala, E.; Leppaemaeki, E.; Solantausta, Y.; Levander, J. VTT Energia

    1995-12-31

    The main tasks for 1995 were: design and assembling of experimental reactors, and physical and chemical characterisation of pyrolysis oils. A PDU-unit (20 kg/h) has been designed and it will be assembled in April 1996. A 1 kg/h pyrolyzer has been constructed with a hot-filtration system (a ceramic candle filter) and direct quenching with a hydrocarbon oil. The equipment has worked well. Pine saw dust has been used as a feed and a good-quality solids-free product oil has been obtained. In addition to this, a smaller (150 g/h) pyrolyzer has been bought from Canada (University of Waterloo). The small equipment will be used for example for catalytic upgrading of pyrolysis vapours. Chemical characterisation of pyrolysis oil has been carried out 1995. Water extraction has been developed for a fractionation method. Pyrolysis oil samples produced from mixed hardwood, eucalyptus and straw have been employed. The objective of the study has been to develop a simple characterisation method for comparison of different pyrolysis oils. For example reactive compounds have been identified. Main analytical method for analysing the water-soluble fraction has been GC-MS. The research will be continued 1996. A literature review of chemical and physical characterization of pyrolysis oils has been published 1995. Testing of fuel oil analyses has been continued within the IEA pyrolysis project. VTT Energy is responsible for fuel oil analytical methods

  13. Uranium-mill appraisal program

    International Nuclear Information System (INIS)

    Everett, R.J.; Cain, C.L.

    1982-08-01

    The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

  14. Physico-chemical properties of Moringa oleifera seed oil enzymatically interesterified with palm stearin and palm kernel oil and its potential application in food.

    Science.gov (United States)

    Dollah, Sarafhana; Abdulkarim, Sabo Mohammed; Ahmad, Siti Hajar; Khoramnia, Anahita; Mohd Ghazali, Hasanah

    2016-08-01

    High oleic acid Moringa oleifera seed oil (MoO) has been rarely applied in food products due to the low melting point and lack of plasticity. Enzymatic interesterification (EIE) of MoO with palm stearin (PS) and palm kernel oil (PKO) could yield harder fat stocks that may impart desirable nutritional and physical properties. Blends of MoO and PS or PKO were examined for triacylglycerol (TAG) composition, thermal properties and solid fat content (SFC). EIE caused rearrangement of TAGs, reduction of U3 and increase of U2 S in MoO/PS blends while reduction of U3 and S3 following increase of S2 U and U2 S in MoO/PKO blends (U, unsaturated and S, saturated fatty acids). SFC measurements revealed a wide range of plasticity, enhancements of spreadability, mouthfeel and cooling effect for interesterified MoO/PS, indicating the possible application of these blends in margarines. However, interesterified MoO/PKO was not suitable in margarine application, while ice-cream may be formulated from these blends. A soft margarine formulated from MoO/PS 70:30 revealed high oxidative stability during 8 weeks storage with no significant changes in peroxide and p-anisidine values. EIE of fats with MoO allowed nutritional and oxidative stable plastic fats to be obtained, suitable for possible use in industrial food applications. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  15. Properties of a biosurfactant produced by Bacillus pumilus using vinasse and waste frying oil as alternative carbon sources

    Directory of Open Access Journals (Sweden)

    Juliana Guerra de Oliveira

    2013-02-01

    Full Text Available Biosurfactants are chemical molecules produced by the microorganisms with potential for application in various industrial and environmental sectors. The production parameters and the physicochemical properties of a biosurfactant synthesized by Bacillus pumilus using different concentrations of vinasse and waste frying oil as alternative carbon sources were analyzed. The microorganism was able to grow and produce a biosurfactant using both the residues. The surface tension was reduced up to 45 mN/m and the maximum production of crude biosurfactant was 27.7 and 5.7 g/l for vinasse and waste frying oil, respectively, in concentration of 5%. The critical micelle concentration (CMC results of 1.5 and 0.2 g/l showed the efficiency of the biosurfactant produced on both the substrates. The results showed that the alternative substrates could be used for the production of an efficient biosurfactant by B. pumilus. These properties have potential for industrial and environmental applications.

  16. Influence of carbon dioxide on the fluid properties and calculation of initial oil in place of the Sandrovac field

    Energy Technology Data Exchange (ETDEWEB)

    Krizmanic, K; Peric, M

    1973-01-01

    The aim of this study is to acquaint the reader with the essential physical and production properties of the Sandrovac oil field. Extreme containment of carbon dioxide in fluids was encountered. Ranging in some places to 80%, this greatly influences physical properties of saturating fluids, and requires the study of the closest association of the content of carbon dioxide and physical parameters of fluids. At the same time, it enables the application of a qualitatively new and very efficient method of increasing the fluid recovery method of oil displacement by carbon dioxide. Principles and methods of calculating and processing the PVT data, capillary pressure, fluid saturations, relative permeabilities, and material balance calculations for tectonic blocks and hydrodynamic units, are given. (11 refs.)

  17. Production of Biodiesel from Thespesiapopulnea seed oil through rapid in situ transesterification - an optimization study and assay of fuel properties

    Science.gov (United States)

    Bhargavi, G.; Nageswara Rao, P.; Renganathan, S.

    2018-03-01

    Biodiesel production was carried out from Thespesia populnea seed oil through rapid insitu transesterification. Influence of reaction parameters such as catalyst type and concentration, methanol to biomass ratio, co-solvent volume, temperature and agitation speed on conversion of oil into methyl esters was investigated. The effect of different co-solvents on conversion was evaluated. Optimum methyl ester conversion of 97.80% was achieved at 1.5wt% of KOH catalyst, 5.5:1 (v/w) methanol to biomass ratio, 25vol%tetrahydrofuranco-solvent, 60°C and 500 rpm within 120min of reaction time. Fuel properties of produced methyl esters were well fitted within the limits of ASTMD 6751 standards. Considering the properties of produced biodiesel, Thespesia populnea seed derived biodiesel can be used as potential alternate to fossil diesel fuel.

  18. Inhibition of Melanogenesis Versus Antioxidant Properties of Essential Oil Extracted from Leaves of Vitex negundo Linn and Chemical Composition Analysis by GC-MS

    Directory of Open Access Journals (Sweden)

    Tsong-Min Chang

    2012-03-01

    Full Text Available This study was aimed at investigating the antimelanogenic and antioxidative properties of the essential oil extracted from leaves of V. negundo Linn and the analysis of the chemical composition of this essential oil. The efficacy of the essential oil was evaluated spectrophotometrically, whereas the volatile chemical compounds in the essential oil were analyzed by gas chromatography-mass spectrometry (GC-MS. The results revealed that the essential oil effectively suppresses murine B16F10 tyrosinase activity and decreases the amount of melanin in a dose-dependent manner. Additionally, the essential oil significantly scavenged 2,2-diphenyl-1-picrylhydrazyl (DPPH and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid (ABTS radicals, and showed potent reducing power versus metal-ion chelating properties in a dose-dependent pattern. The chemical constituents in the essential oil are sesquiterpenes (44.41%, monoterpenes (19.25%, esters (14.77%, alcohols (8.53%, aromatic compound (5.90%, ketone (4.96%, ethers (0.4% that together account for 98.22% of its chemical composition. It is predicted that the aromatic compound in the essential oil may contribute to its antioxidant activities. The results indicated that essential oil extracted from V. negundo Linn leaves decreased melanin production in B16F10 melanoma cells and showed potent antioxidant activities. The essential oil can thereby serve as an inhibitor of melanin synthesis and could also act as a natural antioxidant.

  19. Relations between interfacial properties and heavy crude oil emulsions stability; Relations entre les proprietes interfaciales et la stabilite des emulsions de brut lourd

    Energy Technology Data Exchange (ETDEWEB)

    Hoebler-Poteau, S.

    2006-02-15

    Oil in water emulsions are currently being investigated to facilitate the transport of viscous heavy oils. The behavior of these emulsions is largely controlled by oil / water interfaces. The surface-active components of crude oil such as asphaltenes and naphthenic acids compete among themselves at these interfaces and also with possibly added synthetic surfactant emulsifier.Here, we present a study of dynamic interfacial tension and rheology of interfaces between water and a model oil (toluene) in which asphaltenes and other surface active molecules from crude oil are dissolved. We show that different parameters such as aging of the interface, asphaltenes concentration, the pH and salinity of the aqueous phase have a strong influence on interfacial properties of asphaltenes at the oil/water interface. Several micro-pipette experiments, in which micrometric drops have been manipulated, are described as well as small angle neutron scattering measurements. The influence of lower molecular weight surface-active species, such as the natural naphthenic acids contained in maltenes (crude oil without asphaltenes) has been investigated, and an interaction between asphaltenes and maltenes which facilitates molecular arrangement at the interface was detected. The microscopic properties of the different interfaces and the stability of the corresponding emulsions are determined to be correlated.The results obtained on model emulsions and model oil/water interfaces were found to be helpful in order to explain and predict the behavior of heavy crude oil emulsions. (author)

  20. Inhibition of melanogenesis versus antioxidant properties of essential oil extracted from leaves of Vitex negundo Linn and chemical composition analysis by GC-MS.

    Science.gov (United States)

    Huang, Huey-Chun; Chang, Tzu-Yun; Chang, Long-Zen; Wang, Hsiao-Fen; Yih, Kuang-Hway; Hsieh, Wan-Yu; Chang, Tsong-Min

    2012-03-30

    This study was aimed at investigating the antimelanogenic and antioxidative properties of the essential oil extracted from leaves of V. negundo Linn and the analysis of the chemical composition of this essential oil. The efficacy of the essential oil was evaluated spectrophotometrically, whereas the volatile chemical compounds in the essential oil were analyzed by gas chromatography-mass spectrometry (GC-MS). The results revealed that the essential oil effectively suppresses murine B16F10 tyrosinase activity and decreases the amount of melanin in a dose-dependent manner. Additionally, the essential oil significantly scavenged 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radicals, and showed potent reducing power versus metal-ion chelating properties in a dose-dependent pattern. The chemical constituents in the essential oil are sesquiterpenes (44.41%), monoterpenes (19.25%), esters (14.77%), alcohols (8.53%), aromatic compound (5.90%), ketone (4.96%), ethers (0.4%) that together account for 98.22% of its chemical composition. It is predicted that the aromatic compound in the essential oil may contribute to its antioxidant activities. The results indicated that essential oil extracted from V. negundo Linn leaves decreased melanin production in B16F10 melanoma cells and showed potent antioxidant activities. The essential oil can thereby serve as an inhibitor of melanin synthesis and could also act as a natural antioxidant.

  1. Radiative Properties, Dynamics, and Chemical Evolution of the Smoke from the 1991 Kuwait Oil Fires.

    Science.gov (United States)

    Herring, John Allan

    The oil fields in Kuwait were the scene of a massive conflagration during much of 1991 that was started by Iraqi forces during the Gulf War. At this time, approximately 4 to 5 million barrels of oil were burning each day. The climatic impacts of the fires were limited by the fact that the smoke was generally confined to the lower 6 km of the atmosphere, where its removal by precipitation processes limited its lifetime. The optical properties of the smoke were such that it was an efficient absorber of solar radiation, with a single-scattering albedo of {~ }0.6. This led to rapid warming of the plume during the daytime. Instantaneous heating rates were calculated to be up to {~}90 K day ^{-1}. Because of the vertical distribution of the heating in the plume, the upper part of the plume became unstable and a turbulent mixed-layer developed. Conversely, the lower part of the plume became stably stratified due to the heating. This led to a general decoupling of the lower boundary layer, preventing the heating experienced by the plume from reaching the ground. The general warming of the plume led to mesoscale vertical transport of the plume as a whole. This mode of vertical transport was limited because of the large horizontal extent of the region of buoyant smoke. The mesoscale vertical transport occurred at roughly the same rate as the upward mixing of smoke due to smaller-scale turbulent motions. This vertical transport, however, did not occur rapidly enough to loft the smoke into the upper troposphere before it was dispersed by wind shear and the mixing caused by solar heating of the smoke. The chemical evolution of the plume was generally somewhat slow, due to the lack of ultraviolet radiation to initiate photochemistry within the smoke plume and to the generally low concentrations of nitrogen oxides, which act as catalysts for photochemical chain reactions. Heterogeneous chemical reactions between gases and black carbon particles produced by the fires were also not

  2. An appraisal of the properties of bottom waste obtained from bio-mass congestion to estimate the ways of its environmental use

    Directory of Open Access Journals (Sweden)

    Śliwka Małgorzata

    2017-06-01

    Full Text Available The bottom waste obtained from bio-mass burning shows a huge variability of chemical and physical properties, depending on the kind of bio-mass, the type of a cauldron and burning parameters. The huge variability of the bottom ashes from the incineration plant and co-combustion of bio-mass makes it difficult to find any way to its management. In reality, only the bottom ashes from coal combustion and the small amount from lignite combustion are used, mainly in the building industry and in mining industry. The article presents the initial research, concerning the estimation of the properties of the bottom ashes obtained from bio-mass congestion in the fluidized-bed boiler to use them safely for the environment. To determine the influence of the tested waste on plants, a number of pot experiments have been conducted. The plants which have been used are recommended for phytotoxicity estimation, and are also used for biological reclamation.

  3. Composition, properties and potential food applications of natural emulsions and cream materials based on oil bodies

    NARCIS (Netherlands)

    Nikiforidis, C.V.; Matsakidou, A.; Kiosseoglou, V.

    2014-01-01

    Oil bodies are micron- or submicron-sized organelles found mainly in parts of plants such as seeds, nuts or some fruits and their main role is to function as energy stores. Their structure is made up of a core of triglycerides covered by a protein–phospholipid layer which protects the oil bodies

  4. Effect of polysoap on physical and tribology properties of soybean oil-based grease

    Science.gov (United States)

    The overall objective of this work was to evaluate the evolution of soybean oil based grease containing polysoaps made from polymeric epoxdized soybean oil. With this aim, lubricating greases were prepared from a mixed soap comprising lithium soap and triethanol ammonium polysoap synthesized from so...

  5. Methyl esters (biodiesel) from Melanolepis multiglandulosa (alim) seed oil and their properties

    Science.gov (United States)

    Sufficient supply of feedstock oils is a major issue facing biodiesel in order to increase the still limited amounts available. In this work, the fatty acid methyl esters, also known as biodiesel, of the seed oil of Melanolepsi multiglandulosa, a member of the Euphorbiaceae family, were prepared and...

  6. Impact of olive oil usage on physical properties of chocolate fillings

    International Nuclear Information System (INIS)

    Dias, J.M.; Almeida, M.; Adikevičius, D.; Andzevičius, P.; Alvarenga, N.B.

    2016-01-01

    The development of a new olive oil based chocolate filling was carried out. In this study three different types of virgin olive oil were tested, in three different concentrations in the production of chocolate fillings. An instrumental analysis was carried out for chemical analyses, such as moisture and pH. The color analysis included the CIE 1976 L*a*b* color space and RGB color space. The rheological analysis included the evaluation of flow curve, flow index (n), consistency (K) and dynamic moduli (G’ and G’’). No influence was detected on the moisture or pH of chocolate fillings, due to the concentration or type of olive oil. However, the use of olive oil decreased consistency from 1371 Pasn to 148 - 559 Pasn , even using olive oil concentrations of 20% w/w. Also, G’ registered a similar correlation, where a decrease was observed from 4.42 x 106 Pa to values around 1.70-2.51 x 106 Pa, for 20% w/w olive oil. The fillings presented a darker yellow-green color when using olive oil produced with Galega and Cordovil de Serpa varieties, but olive oil produced with the Arbequina variety did not affect color significantly, although further studies will be required to evaluate the impact of ripening stage. [es

  7. Effect of unground oil palm ash as mixing ingredient towards properties of concrete

    Science.gov (United States)

    Sulaiman, M. A.; Muthusamy, K.; Mat Aris, S.; Rasid, M. H. Mohd; Paramasivam, R.; Othman, R.

    2018-04-01

    Malaysia being one of the world largest palm oil producers generates palm oil fuel ash (POFA), a by-product in increasing quantity. This material which usually disposed as solid waste causes pollution to the environment. Success in converting this waste material into benefitting product would reduce amount of waste disposed and contributes towards cleaner environment. This research explores the potential of unground oil palm ash being used as partial sand replacement in normal concrete production. Experimental work has been conducted to determine the workability, compressive strength and flexural strength of concrete when unground oil palm ash is added as partial sand replacement. A total of five mixes containing various percentage of oil palm ash, which are 0%, 5%, 10%, 15% and 20% have been prepared. All specimens were water cured until the testing date. The slump test, compressive strength test and flexural strength test was conducted. The findings show that mix produced using 10% of palm oil fuel ash exhibit higher compressive strength and flexural strength as compared to control specimen. Utilization of unground oil palm ash as partial sand replacement would be able to reduce dependency of construction industry on natural sand supply and also as one of the solution to reuse palm oil industry waste.

  8. Insecticidal Properties of Essential Oils and Some of Their Constituents on the Turkestan Cockroach (Blattodea: Blattidae).

    Science.gov (United States)

    Gaire, Sudip; O'Connell, Mary; Holguin, Francisco O; Amatya, Anup; Bundy, Scott; Romero, Alvaro

    2017-04-01

    The Turkestan cockroach, Blatta lateralis (Walker), has become the most important peridomestic species in urban areas of the Southwestern United States. The aim of this study was to evaluate the use of botanical compounds to control this urban pest. We tested the acute toxicity and repellency of six botanical constituents and three essential oils on Turkestan cockroach nymphs. Chemical composition of the essential oils was also determined. Topical and fumigant assays with nymphs showed that thymol was the most toxic essential oil constituent, with a LD50 of 0.34 mg/nymph and a LC50 of 27.6 mg/liter air, respectively. Contact toxicity was also observed in assays with trans-Cinnamaldehyde, eugenol, geraniol, methyl eugenol, and p-Cymene. Methyl eugenol and geraniol had limited fumigant toxicity. The essential oils from red thyme, clove bud, and Java citronella exhibited toxicity against nymphs. Cockroaches avoided fresh dry residues of thymol and essential oils. Chemical analysis of the essential oils confirmed high contents of effective essential oil constituents. Our results demonstrated that essential oils and some of their constituents have potential as eco-friendly insecticides for the management of Turkestan cockroaches. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Antimicrobial, Rheological, and Thermal Properties of Plasticized Polylactide Films Incorporated with Essential Oils to Inhibit Staphylococcus aureus and Campylobacter jejuni.

    Science.gov (United States)

    Ahmed, Jasim; Hiremath, Nikhil; Jacob, Harsha

    2016-02-01

    Polylactide (PLA) is the most mature biobased and biodegradable polymer. Due to its inherent brittleness, the polymer cannot be used as a packaging material without plasticizer. An attempt was made to develop antimicrobial plasticized PLA film by incorporating polyethylene glycol (PEG) and 3 essential oils (EO), namely cinnamon, garlic, and clove by solvent casting method. Physical, thermal, and rheological properties of those films were evaluated for practical applications whereas the antimicrobial properties were tested against Staphylococcus aureus and Campylobacter jejuni-pathogens related to poultry industry. Both PEG and EOs led to the formation of flexible PLA/PEG/EO films with significant drop in the glass transition temperature (Tg ), and mechanical property. Time-temperature superposition (TTS) principle was employed to melt rheology of EO-based films at selected temperature, and rheological moduli superimposed well in an extended frequency range. Among EOs, cinnamon and clove oil-based films (PLA/PEG/CIN and PLA/PEG/CLO) exhibited a complete zone of inhibition against C. jejuni at the maximum concentration (1.6 mL per 2 g PLA/PEG blend) whereas the garlic oil-based film (PLA/PEG/GAR) had the lowest activity. © 2016 Institute of Food Technologists®

  10. Shear Resistance Properties of Modified Nano-SiO2/AA/AM Copolymer Oil Displacement Agent

    Directory of Open Access Journals (Sweden)

    Nanjun Lai

    2016-12-01

    Full Text Available To address the problem regarding poor shear resistance of commonly employed polymers for oil displacement, modified nano-SiO2/AA/AM copolymer (HPMNS oil displacement agents were synthesized using acrylic acid (AA, acrylamide (AM, and modified nano-SiO2 of different modification degrees as raw materials. HPMNS was characterized by means of infrared spectroscopy (IR, nuclear magnetic resonance (1H-NMR, 13C-NMR, dynamic/static light scattering, and scanning electron microscope. A comparative study of the shear resistance properties for partially hydrolyzed polyacrylamide (HPAM and HPMNS was conducted. Compared to HPAM, the introduced hyperbranched structure endowed HPMNS with good shear resistance, which was quantified from the viscosity retention ratio of the polymer solutions. From the perspective of rheological property, HPMNS also showed great shear stability after shearing by a Mixing Speed Governor and porous media shear model. Furthermore, with a higher degree of modification, HPMNS-2 had better shear stability in terms of viscosity and rheological property than HPMNS-1. The phenomena were due to its lower hydrodynamic radius, weight-average molecular weight, and better flexibility of its molecular chains. In addition, upon the indoor displacement test, the resistance factor and residual resistance factor values of HPMNS-2 were higher than those of HPAM. This behavior is beneficial for increasing oil recovery.

  11. Effect of castor oil enrichment layer produced by reaction on the properties of PLA/HDI-g-starch blends.

    Science.gov (United States)

    Xiong, Zhu; Zhang, Lisheng; Ma, Songqi; Yang, Yong; Zhang, Chuanzhi; Tang, Zhaobin; Zhu, Jin

    2013-04-15

    Blends of entirely bio-sourced polymers, namely polylactide (PLA) and starch, have been melt-compounded by lab-scale co-extruder with castor oil (CO) as a plasticizer. The enrichment of castor oil on starch had great effect on the properties of the blends. If the castor oil was mainly dispersed in PLA matrix, the properties of the blends were poor, but when the hexamethylenediisocyanate (HDI) was grafted on starch granules the ready reactions between the hydroxyl on CO and the isocyante on the HDI-grafted starch (HGSTs) brought CO molecules enriched on starch particles. DSC analysis shows that the CO layer on starch has a positive effect on the crystallization of PLA in the ternary blend. The accumulation of CO on starch greatly improves the toughness and impact strength of PLA/starch blends. The grafting content of HDI on the starch granules primarily determined the compatibility and properties of the resulted blends. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Biological and Nutritional Properties of Palm Oil and Palmitic Acid: Effects on Health.

    Science.gov (United States)

    Mancini, Annamaria; Imperlini, Esther; Nigro, Ersilia; Montagnese, Concetta; Daniele, Aurora; Orrù, Stefania; Buono, Pasqualina

    2015-09-18

    A growing body of evidence highlights the close association between nutrition and human health. Fat is an essential macronutrient, and vegetable oils, such as palm oil, are widely used in the food industry and highly represented in the human diet. Palmitic acid, a saturated fatty acid, is the principal constituent of refined palm oil. In the last few decades, controversial studies have reported potential unhealthy effects of palm oil due to the high palmitic acid content. In this review we provide a concise and comprehensive update on the functional role of palm oil and palmitic acid in the development of obesity, type 2 diabetes mellitus, cardiovascular diseases and cancer. The atherogenic potential of palmitic acid and its stereospecific position in triacylglycerols are also discussed.

  13. Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends

    Energy Technology Data Exchange (ETDEWEB)

    Altiparmak, D.; Keskin, A.; Koca, A. [Gazi University, Ankara (Turkey). Technical Education Faculty; Guru, M. [Gazi University, Ankara (Turkey). Engineering and Architectural Faculty

    2007-01-15

    In this experimental work, tall oil methyl ester-diesel fuel blends as alternative fuels for diesel engines were studied. Tall oil methyl ester was produced by reacting tall oil fatty acids with methyl alcohol under optimum conditions. The blends of tall oil methyl ester-diesel fuel were tested in a direct injection diesel engine at full load conditions. The effects of the new fuel blends on the engine performance and exhaust emission were tested. It was observed that the engine torque and power output with tall oil methyl ester-diesel fuel blends increased up to 6.1% and 5.9%, respectively. It was also seen that CO emissions decreased to 38.9% and NO{sub x} emissions increased up to 30% with the new fuel blends. The smoke capacity did not vary significantly. (author)

  14. Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends.

    Science.gov (United States)

    Altiparmak, Duran; Keskin, Ali; Koca, Atilla; Gürü, Metin

    2007-01-01

    In this experimental work, tall oil methyl ester-diesel fuel blends as alternative fuels for diesel engines were studied. Tall oil methyl ester was produced by reacting tall oil fatty acids with methyl alcohol under optimum conditions. The blends of tall oil methyl ester-diesel fuel were tested in a direct injection diesel engine at full load condition. The effects of the new fuel blends on the engine performance and exhaust emission were tested. It was observed that the engine torque and power output with tall oil methyl ester-diesel fuel blends increased up to 6.1% and 5.9%, respectively. It was also seen that CO emissions decreased to 38.9% and NO(x) emissions increased up to 30% with the new fuel blends. The smoke opacity did not vary significantly.

  15. Physical and Mechanical Properties of Palm Oil Frond and Stem Bunch for Developing Pruner and Harvester Machinery Design

    Directory of Open Access Journals (Sweden)

    Yazid Ismi Intara

    2013-06-01

    Full Text Available A development of oil palm pruner and harvester machinery design implemented in the field still faces a problem due to the lack of effective and efficient design which is need to be solved. It was noted that in order to develop the design, an early data and information of physical and mechanical properties of palm oil frond and stem fruits is critically important. The objective of the research was to obtain the physical and mechanical properties of palm oil frond and stem in order to develop the design of pruner and harvester machinery. The result showed that tool machinery was been advantageous by the physical properties of the plant i.e. the total weight of frond and leaf which enable to support the cutting process. The average of total weight of frond and leaf was 16.8 kg. The diagonal cutting trajectory was been more advantageous because of total weight and frond shape toward to the different of the plant tissue area. The measurement result shows that cutting curve follows the time required for cutting. The comparison among cutting curve shows differences in cutting thickness or length. In this case, the thickness is linear with cutting time. Besides, those curves show differences at the height which determine the maximum value of tested material cutting resistance. Alternative solution for machinery development design is pruner-harvester for height plant below 6 m and among 6 to 12 m. For below 6 m, pruner-harvester was designed by incorporating motor as power source and cutter-disc as the knife cutter. That condition was relied on that estate which was maintenance intensively commonly used cutter-disc. Pruner-harvester above 6 m and up to 12 m was improved based on manual egrek-designed by adding fresh fruit bunch alley supply glide in order to keep the fruits still in intact form. The consideration was based on affectivity and efficiency. It also considers homogenous ecological of palm oil plant which should be maintained to reduce global

  16. Palm oil biodiesel synthesized with potassium loaded calcined hydrotalcite and effect of biodiesel blend on elastomer properties

    Energy Technology Data Exchange (ETDEWEB)

    Trakarnpruk, Wimonrat; Porntangjitlikit, Suriya [Petrochemistry and Polymer Science, Department of Chemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand)

    2008-07-15

    Biodiesel was prepared from palm oil by transesterification with methanol in the presence of 1.5%K loaded-calcined Mg-Al hydrotalcite. Fatty acid methyl esters content of 96.9% and methyl ester yield of 86.6% were achieved using a 30:1 methanol to oil molar ratio at 100{sup o}C for 6 h and 7 wt% catalyst. The biodiesel was characterized and its impact on elastomer properties was evaluated. The compatibility of B10 diesel blend (10% biodiesel) with six types of elastomers commonly found in fuel systems (NBR, HNBR, NBR/PVC, acrylic rubber, co-polymer FKM, and terpolymer FKM) were investigated. The physical properties of elastomers after immersion in tested fuels (for 22, 670, and 1008 h at 100{sup o}C) were measured according to American Society of Testing and Materials (ASTM). These include swelling (mass change and volume change), hardness, tensile and elongation, as well as the dynamic mechanical property. The results showed that properties of NBR, NBR/PVC and acrylic rubber were affected more than other elastomers. This is due to the absorption and dissolving of biodiesel by rubber in these samples. Co-polymer FKM and terpolymer FKM which are fluoroelastomers show little property change. (author)

  17. 49 CFR 24.103 - Criteria for appraisals.

    Science.gov (United States)

    2010-10-01

    ...-year sales history of the property. (See appendix A, § 24.103(a)(1).) (ii) All relevant and reliable..., § 24.103(a).) (iii) A description of comparable sales, including a description of all relevant physical..., signature, and certification of the appraiser. (b) Influence of the project on just compensation. The...

  18. An APPRAISAL analysis of the language of real estate advertisements

    African Journals Online (AJOL)

    This article focuses on the linguistic choices made by estate agencies in their advertisements of houses, and how these choices compare across two competing agencies in Grahamstown, South Africa – Remax Frontier and Pam Golding Properties. Using Martin and White's (2005) APPRAISAL system, it investigates the ...

  19. A Preliminary Appraisal Of The Composition And Industrial ...

    African Journals Online (AJOL)

    A preliminary appraisal of the composition and geotechnical properties of clay deposits at Tumfure, Rukwu and Tashar Garba in Udubo area, northeastern Nigeria has been undertaken and results related to their industrial suitability. Mineralogical studies indicate that the clay is mainly kaolinitic while quartz and feldspar are ...

  20. 32 CFR 644.47 - Appraisal of other interests.

    Science.gov (United States)

    2010-07-01

    ... improvements will include, in addition to complete coverage of all factors influencing the use of the property... construction. (ii) Complete cost data as to original purchase price and Government construction. (iii) Detailed... inspected, it will be so noted in the appraisal report. The decision concerning the necessity for a physical...

  1. Essential oils, their therapeutic properties, and implication in dentistry: A review.

    Science.gov (United States)

    Dagli, Namrata; Dagli, Rushabh; Mahmoud, Rasha Said; Baroudi, Kusai

    2015-01-01

    Antibacterial treatments currently used for treatment cause several side effects, and bacterial resistance to the antibiotics is also increasing. Therefore, there is need to find better alternatives. Essential oils (EOs) have been used for treatment of various ailments since ancient times and have gained popularity over the years. Safety and efficacy of EOs have been proved by several clinical trials. This review gives an overview on the EOs, their uses, and adverse effects. A literature search was performed in the PubMed for clinical trial studies and review articles on EOs published up to February 2015. The search was performed during March 2015. The following keywords were used: "Lavender essential oil," "cinnamon oil," "clove oil," "eucalyptus oil," "peppermint oil," "lemon EOs," and "tea tree oil." Total 70 relevant articles were found in PubMed database. After screening of abstracts, 52 articles were selected to be included in the present review. On the basis of the available information, it can be concluded that EOs have the potential to be developed as preventive or therapeutic agents for various oral diseases, but further clinical trials are required to establish their safety and efficacy.

  2. Phytochemical Properties of Mentha longifolia L. Essential Oil and its Antimicrobial Effects on Staphylococcus Aureus

    Directory of Open Access Journals (Sweden)

    R Mahmodi

    2011-12-01

    Full Text Available Background & Aim: Due to the side effects of chemical and synthetic preservatives, consumers have recently become more eager to use foods containing natural preservatives from plants, animals and microbial sources. In the present study, biochemical composition and antibacterial effects (MIC of Mentha longifolia L. essential oil against Staphylococcus aureus have been evaluated. Methods: In this experimental study, the biochemical composition and antibacterial prosperities of this essential oil was determined by the Gas chromatography/ mass spectrophotometer (GC/MS and micro dilution method respectively. The morphological and membrane changes of the bacterial cell under the effect of this essential oil were evaluated by transmission electron microscopy. The collected data was analyzed by the SPSS software using ANOVA. Results: The chemical analysis of the essential oil by Gas chromatography/ mass spectrophotometer (GC/MS revealed the presence of 22 substances (95.30%, mainly including Pulegon (31.54%, 1,8 Cineol (15.89%, Menthoforan (11.8% and Cis- Isopulegon (9.74%. Minimum inhibitory concentration of the essential oil determined under different temperature and pH values showed to be in the range of 75-1200 µg/ ml. Conclusion: The MIC results and membrane cell damage observed in the electron microscopy evaluation indicated that this essential oil have a high antibacterial activity. Therefore, this essential oil can be combined with other agents for the preservation of foods against pathogenic and toxigenic microorganisms.

  3. INVESTIGATION ON CHEMICAL COMPOSITION, ANTIMICROBIAL, ANTIOXIDANT, AND CYTOTOXIC PROPERTIES OF ESSENTIAL OIL FROM DRACOCEPHALUM KOTSCHYI BOISS.

    Science.gov (United States)

    Ashrafi, Behnam; Ramak, Parvin; Ezatpour, Behrouz; Talei, Gholam Reza

    2017-01-01

    Dracocephalum kotschyi Boiss is a herb with wide-spread applications. Lorestan traditional healers have applied it for the treatment of rheumatoid diseases and stomach disorders. Hydrodistillation process was used for essential oil extraction, the extracted essential oil was then analyzed through combination of capillary GC-FID, GC-MS and RI. The in vitro antimicrobial, antioxidant and cytotoxic activities of this essential oil were examined. Results indicate that the essential oil has a broad range of anti-microbial activity against all of the tested microorganisms. The 50% of cytotoxic concentrations was 26.4 μg/ml and 4266.7 μg/ml for Hela cells and human lymphocytes, respectively. The oil cytotoxicity against the human tumor cell line was far higher than the amount required for human healthy cells. Conversely, the essential oil's IC 50 value of 49.2 μg/ml in the DPPH assay, could be regarded as its strong antioxidant potential. According to the data obtained, it can be concluded that D. kotschyi essential oil could be applied as a safe antibacterial and antioxidant agent for food and pharmaceutical purposes.

  4. Thermal Stability and Lubrication Properties of Biodegradable Castor Oil on AISI 4140 Steel

    Directory of Open Access Journals (Sweden)

    María Teresa Hernández-Sierra

    2018-06-01

    Full Text Available Lubricants have much importance in several industries, principally serving to reduce friction and wear in mechanical elements. In this study, the influence of Castor oil as bio-lubricant on the friction and wear performance of AISI 4140 steel was investigated. For that purpose, pin-on-disk friction tests were conducted according to ASTM G-99, by using pins of tungsten carbide (WC as counterparts. The experiments were performed at two different temperatures. This work also presents the Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR and 1H-NMR analyses for the chemical characterization of oils and a study of their degradation by oxidation. The analysis of the damage caused to steel due to friction was deepened by analyzing its microhardness and microstructure in the worn zone. As a reference, the same experiments were performed with a commercial oil. The friction behavior of 4140 steel/WC with Castor oil lubrication at the two temperatures was notably better than that obtained under the reference oil lubrication. The kinetic friction coefficient (µk was up to 76% lower. However, a slight increase in steel wear was observed under Castor oil lubrication. Despite this, these results suggest that Castor oil could be used as bio-lubricant in systems which are susceptible to levels of high friction.

  5. Physical and antimicrobial properties of anise oil loaded nanoemulsions on the survival of foodborne pathogens.

    Science.gov (United States)

    Topuz, Osman Kadir; Özvural, Emin Burçin; Zhao, Qin; Huang, Qingrong; Chikindas, Michael; Gölükçü, Muharrem

    2016-07-15

    The purpose of this research was to investigate antimicrobial effects of nano emulsions of anise oil (AO) on the survival of common food borne pathogens, Listeria monocytogenes and Escherichia coli O157:H7. Series of emulsions containing different level of anise oil as potential antimicrobial delivery systems were prepared. Antimicrobial activities of bulk anise oil and its emulsions (coarse and nano) was tested by the minimum inhibitory concentration and time kill assay. Our results showed that bulk anise oil reduced the population of E. coli O157:H7 and L. monocytogenes by 1.48 and 0.47 log cfu/ml respectively after 6 h of contact time. However, under the same condition anise oil nanoemulsion (AO75) reduced E. coli O157:H7 and L. monocytogenes count by 2.51 and 1.64 log cfu/ml, respectively. Physicochemical and microbial analyses indicated that both nano and coarse emulsions of anise oil showed better and long-term physicochemical stability and antimicrobial activity compared to bulk anise oil. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Effect of Reinforcement Shape and Fiber Treatment on the Mechanical Properties of Oil Palm Empty Fruit Bunch-Polyethylene Composites

    International Nuclear Information System (INIS)

    Arif, M. F.; Yusoff, P. S. M. M.; Eng, K. K.

    2010-01-01

    High Density Polyethylene (HDPE) composites were fabricated using oil palm empty fruit bunch (EFB) as the reinforcing material. The effect of reinforcement shape on the tensile and flexural properties, that is 5 mm average length of short fiber and 325-400 μm size distribution of particulate filler have been studied. Overall, EFB short fiber-HDPE composites yield higher mechanical properties compared to EFB particulate-HDPE composites. For both types of composites, considerable improvement showed in tensile and flexural modulus. However, the tensile strength decreased with increase in EFB content. Attempts to improve these properties using alkali and two types of silane, namely γ-Methacryloxypropyltrimethoxysilane (MTS) and vinyltriethoxysilane (VTS) were described. It is found that both types of silane enhanced the mechanical properties of composites. MTS showed better tensile strength compared to VTS. However, only marginal improvement obtained from alkali treatments.

  7. Effect of Reinforcement Shape and Fiber Treatment on the Mechanical Properties of Oil Palm Empty Fruit Bunch-Polyethylene Composites

    Science.gov (United States)

    Arif, M. F.; Yusoff, P. S. M. M.; Eng, K. K.

    2010-03-01

    High Density Polyethylene (HDPE) composites were fabricated using oil palm empty fruit bunch (EFB) as the reinforcing material. The effect of reinforcement shape on the tensile and flexural properties, that is 5 mm average length of short fiber and 325-400 μm size distribution of particulate filler have been studied. Overall, EFB short fiber-HDPE composites yield higher mechanical properties compared to EFB particulate-HDPE composites. For both types of composites, considerable improvement showed in tensile and flexural modulus. However, the tensile strength decreased with increase in EFB content. Attempts to improve these properties using alkali and two types of silane, namely γ-Methacryloxypropyltrimethoxysilane (MTS) and vinyltriethoxysilane (VTS) were described. It is found that both types of silane enhanced the mechanical properties of composites. MTS showed better tensile strength compared to VTS. However, only marginal improvement obtained from alkali treatments.

  8. Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties.

    Science.gov (United States)

    Lu, Yongshang; Larock, Richard C

    2008-11-01

    The environmentally friendly vegetable-oil-based waterborne polyurethane dispersions with very promising properties have been successfully synthesized without difficulty from a series of methoxylated soybean oil polyols (MSOLs) with different hydroxyl functionalities ranging from 2.4 to as high as 4.0. The resulting soybean-oil-based waterborne polyurethane (SPU) dispersions exhibit a uniform particle size, which increases from about 12 to 130 nm diameter with an increase in the OH functionality of the MSOL from 2.4 to 4.0 and decreases with increasing content of the hard segments. The structure and thermophysical and mechanical properties of the resulting SPU films, which contain 50-60 wt % MSOL as renewable resources, have been studied by Fourier transform infrared spectroscopy, differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, transmission electron microscopy, and mechanical testing. The experimental results reveal that the functionality of the MSOLs and the hard segment content play a key role in controlling the structure and the thermophysical and mechanical properties of the SPU films. These novel films exhibit tensile stress-strain behavior ranging from elastomeric polymers to rigid plastics and possess Young's moduli ranging from 8 to 720 MPa, ultimate tensile strengths ranging from 4.2 to 21.5 MPa, and percent elongation at break values ranging from 16 to 280%. This work has addressed concerns regarding gelation and higher cross-linking caused by the high functionality of vegetable-oil-based polyols. This article reports novel environmentally friendly biobased SPU materials with promising applications as decorative and protective coatings.

  9. 41 CFR 102-75.320 - Does appraisal information need to be kept confidential?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Does appraisal information need to be kept confidential? 102-75.320 Section 102-75.320 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 75-REAL PROPERTY DISPOSAL Surplus Real...

  10. Pharma-Nutritional Properties of Olive Oil Phenols. Transfer of New Findings to Human Nutrition.

    Science.gov (United States)

    Crespo, M Carmen; Tomé-Carneiro, Joao; Dávalos, Alberto; Visioli, Francesco

    2018-06-11

    The Mediterranean diet has been long associated with improved cardiovascular prognosis, chemoprevention, and lower incidence of neurodegeneration. Of the multiple components of this diet, olive oil stands out because its use has historically been limited to the Mediterranean basin. The health benefits of olive oil and some of its components are being rapidly decoded. In this paper we review the most recent pharma-nutritional investigations on olive oil biophenols and their health effects, chiefly focusing on recent findings that elucidate their molecular mechanisms of action.

  11. Pharma-Nutritional Properties of Olive Oil Phenols. Transfer of New Findings to Human Nutrition

    Directory of Open Access Journals (Sweden)

    M. Carmen Crespo

    2018-06-01

    Full Text Available The Mediterranean diet has been long associated with improved cardiovascular prognosis, chemoprevention, and lower incidence of neurodegeneration. Of the multiple components of this diet, olive oil stands out because its use has historically been limited to the Mediterranean basin. The health benefits of olive oil and some of its components are being rapidly decoded. In this paper we review the most recent pharma-nutritional investigations on olive oil biophenols and their health effects, chiefly focusing on recent findings that elucidate their molecular mechanisms of action.

  12. HOW APPRAISERS DEVELOP FAIR VALUE

    Directory of Open Access Journals (Sweden)

    MIROSLAV ŠKODA

    2012-01-01

    Full Text Available Management is responsible for its own financial decisions. If we take into account, that fair value concept was shown in financial crisis as something that does not work anymore in this way; there is a big need to develop it for the future. Non-professional readers of financial statements believe, however, that company financials are the work of the public accounting firm that had signed the audit certificate. The main reason for bringing this point up is that when companies disclose Fair Value (FV information in their financial statements, they are taking responsibility for the values disclosed. Management may often be encouraged to utilize the services of an outside professional, but at the end of the day, the outside appraiser is a hired gun. Although the appraiser has to take responsibility for his own work, hiring the appraiser does not absolve management of its ultimate responsibility. The obverse of this is also true. Management does not have to hire the appraiser to develop any fair value disclosures made in the financial statements. Developing FV information is not recommended as a do-it yourself undertaking, there is nothing in Generally Accepted Accounting Principles (GAAP or Securities Exchange Commission (SEC regulations, however, that requires an outside appraiser.

  13. Physico-chemical Properties and Assessment of Edible Oil Potential of Peanuts Grown in Kurram Agency, Parachinar

    Directory of Open Access Journals (Sweden)

    Rahib Hussain

    2015-06-01

    Full Text Available This study was carried out to investigate the oil potential of peanuts for domestic and commercial uses. Peanut oil yield and the physico-chemical properties of extracted oil were investigated on different temperatures (50, 55, 60 and 65 °C and sun drying. Results showed maximum oil yield of 47.2 % at sun drying and lowest values of 37.0 % at 65 °C. Highest and lowest acid values are 25.52 and 5.89 mg/KOH/g at 60 °C and 50 °C respectively. The Free Fatty Acid (FFA content were obtained 12.76 and 2.94 mg/g at 60 °C and 50 °C, while saponification values were 61.71 and 32.25 mg/KOH/g at 60 °C and 50 °C respectively. The highest Peroxide value of 92 mg/KOH/g was recorded at 55 °C which dropped to 43.4 mg/KOH/g at 65 °C. Refractive index (RI and density were not changed significantly (p≤0.05 on all temperatures, while pH was somewhat higher on 50 °C. The moisture content was found lowest up to 3.0 % on 65 °C while highest was 5 % on 50 °C.

  14. Physico-chemical properties and assessment of adible oil potential of peanuts grown in kurram agency, parachinar

    International Nuclear Information System (INIS)

    Hussain, R.; Sattar, S.; Zeb, M.

    2015-01-01

    This study was carried out to investigate the oil potential of peanuts for domestic and commercial uses. Peanut oil yield and the physico-chemical properties of extracted oil were investigated on different temperatures (50, 55, 60 and 65 degree C) and sun drying. Results showed maximum oil yield of 47.2 % at sun drying and lowest values of 37.0 % at 65 degree C. Highest and lowest acid values are 25.52 and 5.89 mg/KOH/g at 60 degree C and 50 degree C respectively. The Free Fatty Acid (FFA) content were obtained 12.76 and 2.94 mg/g at 60 degree C and 50 degree C, while saponification values were 61.71 and 32.25 mg/KOH/g at 60 degree C and 50 degree C respectively. The highest Peroxide value of 92 mg/KOH/g was recorded at 55 degree C which dropped to 43.4 mg/KOH/g at 65 degree C. Refractive index (RI) and density were not changed significantly (p<=0.05) on all temperatures, while pH was somewhat higher on 50 degree C. The moisture content was found lowest up to 3.0 % on 65 degree C while highest was 5 % on 50 degree C. (author)

  15. Thermal, Morphological and Physic-Mechanical Properties of Natural Rubber - CaCO3 Composites Using Jatropha Oil as Softener.

    Directory of Open Access Journals (Sweden)

    Nasruddin

    2018-01-01

    Full Text Available The urgency of green technology in rubber compounding has become a critical issue recently. In this research, the effect of using renewable resources in rubber compounding has been studied. Commercial Calcium Carbonate, Silica and Jatropha Oil were used in natural rubber composite. The research was designed by varying the types of commercial filler namely CaCO3 (47-51 phr, silica (47-51 phr and Jatropha Oil (4-6 phr in natural rubber composites (SIR-20. The formulas were intentionally designed for rubber tips vulcanizates. The samples were characterized by the determination of physic-mechanical, thermal (TGA and morphological (SEM properties. From the measured results, there is no significant effect on the tensile strength, specific gravity, and hardness on the loading of commercial CaCO3 and Silica in natural rubber composites using Jatropha Oil. However, a slight difference in elongation at break and abrasion resistance could be detected. Compared to the commercial rubber tips, the rubber tips produced in this research have higher tensile strength, elongation at break and abrasion resistance. Due to the usage of commercial CaCO3 and Silica, the SEM micrographs show rough surface because of the agglomeration. The thermogram shows clearly the compositional analysis of the rubber tips vulcanizates consist of Jatropha Oil and natural rubber, CaCO3, ash and other filler residues such as Silica.

  16. Effect of lipophilization of dihydrocaffeic acid on its antioxidative properties in fish oil enriched emulsion

    DEFF Research Database (Denmark)

    Sørensen, Ann-Dorit Moltke; de Diego, Sara; Petersen, Lone Kristine

    oxidation than PUFAs from vegetable oils due to their highly polyunsaturated nature, it is necessary to develop methods to protect these PUFAs. Many food systems are emulsions. Due to the so-called polar paradox phenomenon, hydrophilic antioxidants may in many cases be better antioxidants in bulk oil than...... lipophilic compounds, whereas lipophilic antioxidants are more efficient than hydrophilic antioxidants in emulsions. This phenomenon has been explained by the affinity of the compounds towards the different phases in bulk oil and emulsions. The hydrophilic character of many naturally occurring antioxidants...... that generally, lipophilized dihydrocaffeic acid and rutin increased the oxidative stability of o/w emulsions and fish oil enriched milk compared with their parent compound. The results supported a cut-off effect in relation to the acyl chain length esterified to the phenolic compound. Octyl dihydrocaffeate (C8...

  17. Topological and thermal properties of polypropylene composites based on oil palm biomass

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, A. H., E-mail: aamir.bhat@petronas.com.my, E-mail: anie-yal88@yahoo.com; Dasan, Y. K., E-mail: aamir.bhat@petronas.com.my, E-mail: anie-yal88@yahoo.com [Department of Fundamental and Applied Sciences, Universiti Teknologi Petronas, 31750 Perak (Malaysia)

    2014-10-24

    Roughness on pristine and polymer composite surfaces is of enormous practical importance for polymer applications. This study deals with the use of varying quantity of oil palm ash as a nanofiller in a polypropylene based matrix. The oil palm ash sample was preprocessed to break the particles into small diameter by using ultra sonication before using microfluidizer for further deduction in size and homogenization. The oil palm ash was made to undergo many passes through the microfluidizer for fine distribution of particles. Polypropylene based composites containing different loading percentage oil palm ash was granulated by twin screw extruder and then injection molded. The surface morphology of the OPA passed through microfluidizer was analyzed by Tapping Mode - Atomic Force Microscopy (TMAFM). Thermal analysis results showed an increase in the activation energy values. The thermal stability of the composite samples showed improvement as compared to the virgin polymer as corroborated by the on-set degradation temperatures and the temperatures at which 50% degradation occurred.

  18. Topological and thermal properties of polypropylene composites based on oil palm biomass

    International Nuclear Information System (INIS)

    Bhat, A. H.; Dasan, Y. K.

    2014-01-01

    Roughness on pristine and polymer composite surfaces is of enormous practical importance for polymer applications. This study deals with the use of varying quantity of oil palm ash as a nanofiller in a polypropylene based matrix. The oil palm ash sample was preprocessed to break the particles into small diameter by using ultra sonication before using microfluidizer for further deduction in size and homogenization. The oil palm ash was made to undergo many passes through the microfluidizer for fine distribution of particles. Polypropylene based composites containing different loading percentage oil palm ash was granulated by twin screw extruder and then injection molded. The surface morphology of the OPA passed through microfluidizer was analyzed by Tapping Mode - Atomic Force Microscopy (TMAFM). Thermal analysis results showed an increase in the activation energy values. The thermal stability of the composite samples showed improvement as compared to the virgin polymer as corroborated by the on-set degradation temperatures and the temperatures at which 50% degradation occurred

  19. Physicochemical properties and antioxidant activity of Tunisian date palm (Phoenix dactylifera L. oil as affected by different extraction methods

    Directory of Open Access Journals (Sweden)

    Wahid Herch

    2014-09-01

    Full Text Available The chemical analysis of flesh and seed of date palm fruit (Kentichi was evaluated. Carbohydrates were the predominant component in all studied date cultivars (~78.69-83.46 g/100g dry matter, followed by moisture content (~9.23-11.17%, along with moderate amount of fat (~0.56-7.10 g/100g dry matter, protein (~2.16-2.80 g/100g dry matter, and ash (~1.18-1.64 g/100 g dry matter. Some antioxidants (Ascorbic acid, total phenolic, total flavonoid, chlorophyll and carotenoids were found in different values in both date fruit and seed. The physicochemical properties and antioxidant activity of both flesh and seed oil which was extracted using Hexane, Soxhlet and Modified Bligh - Dyer extraction methods were determined. The experimental results showed that temperature, different solvents and extraction time had significant effect on the yield of the date palm oil and physicochemical properties. Date Flesh oil showed an important free radical scavenging activity towards 1-1-diphenyl-2-picrylhydrazyl (DPPH free radical.

  20. Incorporation of citrus essential oils into bacterial cellulose-based edible films and assessment of their physical properties

    Science.gov (United States)

    Indrarti, L.; Indriyati

    2017-03-01

    The use of edible films in food protection and preservation has recently gained more interest since they offer several advantages over synthetic packaging materials. Biocellulose (BC) offers great opportunity as edible film due to their unique physical and mechanical properties. In this study, biocellulose films were prepared by solution casting with addition of 30% carboxymethyl cellulose (CMC) and 30% glycerol as the homogenizer and plasticizer, respectively. Furthermore, various citrus essential oils (EOs) including lemon, lime, and sweet orange were added at 50% w/w of BC dried weight. The solutions were then cast on the tray and allowed to dry in the air convection oven at 40°C overnight. The films were characterized for water solubility, tensile strength (TS), elongation at break (EB), water vapour transmission rate (WVTR), and color. Those characteristics may influence consumer acceptability of the packaged products. Results revealed that addition of lemon and sweet orange EOs into BC-based edible film decreased water solubility and TS, but improved EB, as these oils acted as plasticizers in the film. However, different trend was observed for BC-based film incorporated with lime oil, which had higher solubility and TS, but lower EB and WVTR compared with that of control film. Addition of citrus EOs into BC-based films did not have much effect on color properties as stated in L*, a*, and b* values.

  1. Antidermatophytic Properties of Ar-Turmerone, Turmeric Oil, and Curcuma longa Preparations

    OpenAIRE

    Jankasem, Mukda; Wuthi-udomlert, Mansuang; Gritsanapan, Wandee

    2013-01-01

    Curcuma longa L. or turmeric of the family Zingiberaceae is widely used in Thai traditional medicines for the treatment of rash, itching, tinea, and ringworm. Previous studies on turmeric oil reported effective antifungal activity against dermatophytes, a group of fungi that causes skin diseases. In this study, turmeric creams containing 6 and 10%?w/w turmeric oil were prepared and tested against clinical strains of dermatophytes using broth dilution technique. Minimum fungicidal concentratio...

  2. Synthesis and Thermomechanical Properties of Polyurethanes and Biocomposites Derived from Macauba Oil and Coconut Husk Fibers

    OpenAIRE

    Quirino, Rafael; Silva, Taynara da; Payne, Amanda; Lopes, Roseany de V. V.; Paterno, Leonardo; Sales, Maria

    2015-01-01

    This work reports on a very effective route to produce bio-based polyurethanes (PUs) and composites with high content of renewable carbon sources. The PUs are prepared with polyols synthesized from macauba oil (Acrocomia aculeata) and methylene diphenyl diisocyanate, at different [NCO]/[OH] molar ratios. Later, biocomposites are prepared with the as-obtained PUs reinforced with coconut husk fibers. The successful synthesis of natural oil-based polyols is ascribed to the hydroxylation and cons...

  3. Castor Oil: Properties, Uses, and Optimization of Processing Parameters in Commercial Production

    OpenAIRE

    Patel, Vinay R.; Dumancas, Gerard G.; Kasi Viswanath, Lakshmi C.; Maples, Randall; Subong, Bryan John J.

    2016-01-01

    Castor oil, produced from castor beans, has long been considered to be of important commercial value primarily for the manufacturing of soaps, lubricants, and coatings, among others. Global castor oil production is concentrated primarily in a small geographic region of Gujarat in Western India. This region is favorable due to its labor-intensive cultivation method and subtropical climate conditions. Entrepreneurs and castor processors in the United States and South America also cultivate cast...

  4. Chemical composition and antimicrobial properties of different basil essential oils chemotypes from Togo

    OpenAIRE

    Koffi Koba; P.W. Poutouli; Christine Raynaud; Jean-Pierre Chaumont; Komla Sanda

    2009-01-01

    The aerial parts essential oils of Ocimum basilicum (Lamiaceae) from Togo were steam-distilled and investigated for their percentage composition (GC and GC/MS) and in vitro antimicrobial activities. Five oil chemotypes were identified and classified as follows in line with their principal components: estragole type; linalool/estragole type; methyleugenol type; methyleugenol/t-anethole type; t-anethole type. The in vitro microbiological experiments revealed that only the methyleugenol and meth...

  5. Evaluation of Some Medicinal Herbs Cold Pressed Oils According Their Physicochemical Properties with Chemometry

    OpenAIRE

    Üstün Argon, Zeliha; Gökyer, Ali; Gümüş, Zinar Pınar; Büyükhelvacıgil, Mevlüt

    2017-01-01

    In thisstudy, we investigated the effects of cold pressed oil on physicochemical propertiesof milk thistle (Silybum marianum), aniseseed (Pimpinella anisum), fennel seed(Foeniculum vulgare), terebinth (Pistacia terebinthus), coriander (Coriandrum sativum) and nettle seed (Urtica dioica). Selected oils from CentralAnatolia Regions, were investigated in terms of the fatty acid methyl esters (FAME)compositions, peroxide value (PV), free fatty acid (FFA), refraction index (RI)at 40 ° C and oilsee...

  6. Biodiesel from Jojoba oil-wax: Transesterification with methanol and properties as a fuel

    Energy Technology Data Exchange (ETDEWEB)

    Canoira, Laureano; Alcantara, Ramon; Garcia-Martinez, Jesus; Carrasco, Jesus [Department of Chemical Engineering and Fuels, School of Mines, Polytechnic University of Madrid, Rios Rosas 21, 28003-Madrid (Spain)

    2006-01-15

    The Jojoba oil-wax is extracted from the seeds of the Jojoba (Simmondsia chinensis Link Schneider), a perennial shrub that grows in semi desert areas in some parts of the world. The main uses of Jojoba oil-wax are in the cosmetics and pharmaceutical industry, but new uses could arise related to the search of new energetic crops. This paper summarizes a process to convert the Jojoba oil-wax to biodiesel by transesterification with methanol, catalysed with sodium methoxide (1wt% of the oil). The transesterification reaction has been carried out in an autoclave at 60 deg C, with a molar ratio methanol/oil 7.5:1, and vigorous stirring (600rpm), reaching a quantitative conversion of the oil after 4h. The separation of the fatty acid methyl esters (the fraction rich in FAME, 79% FAME mixture; 21% fatty alcohols; 51% of methyl cis-11-eicosenoate) from the fatty alcohols rich fraction (72% fatty alcohols; 28% FAME mixture; 26% of cis-11-eicosen-1-ol, 36% of cis-13-docosen-1-ol) has been accomplished in a single crystallization step at low temperature (-18 deg C) from low boiling point petroleum ether. The fraction rich in FAME has a density (at 15 deg C), a kinematic viscosity (at 40 deg C), a cold filter plugging point and a high calorific value in the range of the European standard for biodiesel (EN 14214)

  7. Dielectric, ferroelectric, and thermodynamic properties of silicone oil modified PVDF films for energy storage application

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Bingcheng; Wang, Xiaohui, E-mail: wxh@tsinghua.edu.cn, E-mail: llt-dms@mail.tsinghua.edu.cn; Li, Longtu, E-mail: wxh@tsinghua.edu.cn, E-mail: llt-dms@mail.tsinghua.edu.cn [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Sun, Hui [Aero-Engine Control System Institute, Aviation Industry Corporation of China, Jiangsu, Wuxi 214063 (China)

    2016-06-13

    Silicone oil modified poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) films were fabricated by the blending, casting, and hot-molding methods. The dielectric constant was increased for the 7.4 wt. % and 17.0 wt. % silicone oil modified P(VDF-HFP) films, while the dielectric loss for all blend films are decreased. D-E loops of 7.4 wt. % and 17.0 wt. % silicone oil modified P(VDF-HFP) films become slimmer than the pristine P(VDF-HFP) films. The maximum discharged energy density of 10.3 J/cm{sup 3} was obtained in 7.4 wt. % silicone oil modified P(VDF-HFP) films at the external electric field of 398 kV/mm. The Gibbs energy, miscibility, and phase behavior of binary mixture of P(VDF-HFP) silicone oil were investigated using molecular simulations and the extended Flory–Huggins model revealing favorable interactions and compatibility between P(VDF-HFP) and silicone oil.

  8. Improved Physicochemical Properties of Yogurt Fortified with Fish Oil/γ-Oryzanol by Nanoemulsion Technology.

    Science.gov (United States)

    Zhong, Jinfeng; Yang, Rong; Cao, Xiaoyi; Liu, Xiong; Qin, Xiaoli

    2018-01-02

    Fish oil has several dietary benefits, but its application in food formulations is limited because of its poor water-solubility, easy oxidation and strong odor. The purposes of this study were to produce a fish oil/γ-oryzanol nanoemulsion and to evaluate the effect of adding this nanoemulsion on the physicochemical and sensory characteristics of yogurts. Adding fish oil/γ-oryzanol nanoemulsion resulted in a significant reduction in the acidity and syneresis of yogurt. Yogurt with the nanoemulsion had significantly lower peroxide value (0.28 mmol/L after 21 days) and higher retention of eicosapentaenoic acid and docosahexaenoic acid contents (decreased to 95% and 94% of its initial value, respectively) than yogurt with fish oil/γ-oryzanol (peroxide value = 0.65 mmol/L; eicosapentaenoic acid and docosahexaenoic acid contents decreased to 72% and 53% of its initial value, respectively). Fish oil/γ-oryzanol nanoemulsion incorporated into yogurt had closer sensory attributes scores to plain yogurt. This study may have important implications for the application of fish oil/γ-oryzanol nanoemulsion in yogurt.

  9. State of the Art on Functional Virgin Olive Oils Enriched with Bioactive Compounds and Their Properties

    Directory of Open Access Journals (Sweden)

    Patricia Reboredo-Rodríguez

    2017-03-01

    Full Text Available Virgin olive oil, the main fat of the Mediterranean diet, is per se considered as a functional food—as stated by the European Food Safety Authority (EFSA—due to its content in healthy compounds. The daily intake of endogenous bioactive phenolics from virgin olive oil is variable due to the influence of multiple agronomic and technological factors. Thus, a good strategy to ensure an optimal intake of polyphenols through habitual diet would be to produce enriched virgin olive oil with well-known bioactive polyphenols. Different sources of natural biological active substances can be potentially used to enrich virgin olive oil (e.g., raw materials derived from the same olive tree, mainly olive leaves and pomaces, and/or other compounds from plants and vegetables, mainly herbs and spices. The development of these functional olive oils may help in prevention of chronic diseases (such as cardiovascular diseases, immune frailty, ageing disorders and degenerative diseases and improving the quality of life for many consumers reducing health care costs. In the present review, the most relevant scientific information related to the development of enriched virgin olive oil and their positive human health effects has been collected and discussed.

  10. Comparing the effects of oil palm kernel shell and cockle shell on properties of pervious concrete pavement

    Directory of Open Access Journals (Sweden)

    Elnaz Khankhaje

    2017-09-01

    Full Text Available Nowadays, pervious concrete pavement is one of the best materials used in construction industry as a top layer of permeable pavement system to control the storm water at source. In addition, increasing production of waste materials, increased the interest in utilising the waste materials for environmental and technical benefits. Therefore, this paper compared the effect of using two different sizes of oil palm kernel shell (OPKS and cockleshell (CS as partial replacement of natural coarse aggregate on properties of pervious concrete pavement. Thirteen mixtures were made, in which 6.30-mm natural gravel was replaced with 0, 25, 50 and 75% of 6.30-mm and 4.75-mm of both shells. The relationships between the properties of pervious concrete mixtures was also determined. The replacement of OPKS and CS as the natural aggregate decreased the compressive strength, while the angular shape of both shells caused higher void content and permeability as compared to those of control pervious concrete. On the other hand, pervious concrete containing CS showed better properties than those of incorporating OPKS. Apart from that, strong relationships between density, void content, permeability, compressive strength values indicated that they can be used as a pervious concrete quality control tests for prediction of properties of pervious concrete pavement before placement in the field. Keywords: Pervious concrete pavement, Void content, Permeability, Cockleshell, Palm oil kernel shell

  11. Melting properties of some structured lipids native to high stearic acid soybean oil

    Directory of Open Access Journals (Sweden)

    Dunn, R. O.

    2004-06-01

    Full Text Available A number of structured lipids native to high stearic acid soybean oil were synthesized and their physical properties were determined by pulsed nuclear magnetic resonance (NMR, Mettler dropping point and differential scanning calorimetry (DSC. 1,3 Distearo-2-olein (SOS, 1,3 distearo-2-linolein (SLS and1,3 distearo-2-linolenin (SlnS were synthesized from pure 1,3 diacylglycerols and the appropriate fatty acid. Pulsed NMR determinations over the temperature range 10-50 ºC showed that the symmetrical triacylglycerols (SUS: where S = stearic, U = oleic, linoleic or linolenic are high and sharply melting materials, all showing substantial amounts of solids at temperatures up to 33.3 ºC, yet are completely melted at only a few degrees higher. Mettler dropping points for SOS, SLS and SlnS were 44.1, 37.9 and 36.5 ºC respectively. The heats of fusion for the structured triacylglycerols were determined by DSC and shown to be of the order 29-32 cal/gm compared to 45 cal/gm for SSS. The heats of fusion were also calculated from Mettler dropping point determinations as admixtures with soybean oil and showed consistent agreement with the DSC data.Se sintetizaron algunos lípidos estructurados procedentes del aceite de soja con alto contenido en ácido esteárico y sus propiedades físicas se determinaron por resonancia magnética nuclear pulsada (NMR, punto de goteo Mettler y calorimetría diferencial de barrido (DSC. Se sintetizaron 1,3 diestearo-2-oleina (SOS, 1,3 diestearo-2-linoleina (SLS y 1,3 diestearo-2-linolenina (SlnS a partir de 1,3 diacilgliceroles y de los ácidos grasos adecuados puros. Las determinaciones de NMR pulsada en el rango de temperaturas 10- 50 ºC mostraron que los triacilgliceroles simétricos (SUS: donde S = esteárico, U = oleico, linoleico o linolénico funden a mayor temperatura y más bruscamente, todos presentan altos contenidos en sólidos a todas las temperaturas hasta los 33.3 ºC, estando completamente fundidos

  12. Proceedings of the Biomass Pyrolysis Oil Properties and Combustion Meeting, 26-28 September 1994, Estes Park, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Milne, T.

    1995-01-01

    The increasing scale-up of fast pyrolysis in North America and Europe, as well as the exploration and expansion of markets for the energy use of biocrude oils that now needs to take place, suggested that it was timely to convene an international meeting on the properties and combustion behavior of these oils. A common understanding of the state-of-the-art and technical and other challenges which need to be met during the commercialization of biocrude fuel use, can be achieved. The technical issues and understanding of combustion of these oils are rapidly being advanced through R&D in the United States. Canada, Europe and Scandinavia. It is obvious that for the maximum economic impact of biocrude, it will be necessary to have a common set of specifications so that oils can be used interchangeably with engines and combustors which require minimal modification to use these renewable fuels. Fundamental and applied studies being pursued in several countries are brought together in this workshop so that we can arrive at common strategies. In this way, both the science and the commercialization are advanced to the benefit of all, without detracting from the competitive development of both the technology and its applications. This United States-Canada-Finland collaboration has led to the two and one half day specialists meeting at which the technical basis for advances in biocrude development is discussed. The goal is to arrive at a common agenda on issues that cross national boundaries in this area. Examples of agenda items are combustion phenomena, the behavior of trace components of the oil (N, alkali metals), the formation of NOx in combustion, the need for common standards and environmental safety and health issues in the handling, storage and transportation of biocrudes.

  13. 9 CFR 50.9 - Appraisals.

    Science.gov (United States)

    2010-01-01

    ... part must be appraised at their fair market value by an appraiser selected by APHIS. APHIS may decline... veterinarian in charge may grant a reasonable time for the presentation of their registration papers. [67 FR...

  14. Using Expectancy Theory to Explain Performance Appraisal ...

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... appraisal conducting style, the relation between the performance appraisal system and task ... the article first explains the theory model which is based expectancy theory. II. ... which in return lead to rewards. According to [12],.

  15. Physical and mechanical properties of parallel strand lumber made from hot pre-pressed long strand oil palm trunk waste

    Science.gov (United States)

    Fridiyanti, Inayah; Massijaya, M. Y.

    2018-03-01

    This research was focused on the utilization of oil palm trunk waste as a Parallel Strand Lumber (PSL) raw material. This research aimed to analyze the effect of adhesive types and glue spreads to the physical and mechanical properties of PSL. The adhesive types used were isocyanate and urea formaldehyde adhesives. The glue spreads used were 150 g/m2 and 300 g/m2. The research results showed that the moisture content of PSL ranged from 9.30% to 11.80%. The PSL density ranged from 0.64 to 0.78 g/cm3. The volume shrinkage ranged from 5.69 to 7.17%. Modulus of Elasticity (MOE) parallel to the grain and edge side ranged from 51.6 × 103 to 98.3 × 103 kg/cm2, and 62.1 × 103 to 99.9 × 103 kg/cm2, respectively. The Modulus of Rupture (MOR) parallel to the grain and edge side ranged from 269 to 724 kg/cm2 and 342 to 728 kg/cm2, respectively. The PSL hardness perpendicular to the grain, parallel to the grain and the edge side ranged from 135 to 300 kg/cm2, 87 to 321 kg/cm2, and 128 to 251 kg/cm2, respectively. The compressive strength ranged from 181 to 231 kg/cm2. The best adhesive and glue spreads of PSL was isocyanate with glue spread 300 g/m2. PSL made from hot pre-pressed long strand of oil palm trunk waste bonded by isocyanate fulfill JAS 1152: 2007. However, those of bonded by urea formaldehyde failed to fulfill the standard. The physical and mechanical properties of PSL made from oil palm trunk were better compared to those of solid oil palm trunk.

  16. 12 CFR 564.3 - Appraisals required; transactions requiring a State certified or licensed appraiser.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Appraisals required; transactions requiring a State certified or licensed appraiser. 564.3 Section 564.3 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPRAISALS § 564.3 Appraisals required; transactions requiring a State...

  17. Anti-inflammatory properties of blended edible oil with synergistic antioxidants.

    Science.gov (United States)

    Upadya, Haridas; Devaraju, C J; Joshi, Shashank R

    2015-01-01

    Blending of oil combines the potency of two edible oils and offers a balance of fatty acids. Various cooking preparations existing across different ethnicities and regions subject oil to different cooking temperatures thereby causing deterioration of the oil due to oxidative stress. In order to prevent the oxidative damage of unsaturated fatty acid, a blend of rice bran oil (RBO) and safflower oil (SO) (70:30) with an antioxidant technology was designed. A controlled trial was carried out to assess the efficacy of the blend on different biomarkers including lipid parameters and some important inflammatory markers that have the potency to lead to various lifestyle diseases. A prospective, double-blind, randomized, parallel group study (on 80 adult hyperlipidemic patients) was conducted for 3 months. During the study, all the subjects were recommended lifestyle modifications, which included, exercise regime and diet counseling; oil quantity consumed was 1 L/person/month for both the groups. The subjects were divided into two groups; one group, continued with their regularly consumed oil whereas, the other was given the test oil. Biomarkers assessed were lipid profile and seven other inflammatory markers were assessed. Low-density lipoprotein cholesterol (LDL-C) the primary marker for cardiovascular diseases showed a decrease of 56.07 ± 04.31 mg/dL and 31.98 ± 03.81 mg/dL (P < 0.001 by analysis of variance [ANOVA]) from baseline in test and control group, respectively, during 3 months. Similar reduction trends were observed for total cholesterol where -52.31 ± 13.04 mg/dL and 31.98 ± 04.12 mg/dL (P < 0.001 by ANOVA, between the groups) were seen in test and control group, respectively. Oxidized LDL and high sensitivity C-reactive protein showed a reduction of 2.23 ± 1.3 units/dL and 0.87 ± 2.85 mg/L in test group whereas; an increase of 1.04 ± 1.73 units/dL and 0.44 ± 2.37 mg/L was seen in the control group, respectively (P < 0.05 by Student's t-test, between

  18. Anti-inflammatory properties of blended edible oil with synergistic antioxidants

    Directory of Open Access Journals (Sweden)

    Haridas Upadya

    2015-01-01

    Full Text Available Background: Blending of oil combines the potency of two edible oils and offers a balance of fatty acids. Various cooking preparations existing across different ethnicities and regions subject oil to different cooking temperatures thereby causing deterioration of the oil due to oxidative stress. In order to prevent the oxidative damage of unsaturated fatty acid, a blend of rice bran oil (RBO and safflower oil (SO (70:30 with an antioxidant technology was designed. A controlled trial was carried out to assess the efficacy of the blend on different biomarkers including lipid parameters and some important inflammatory markers that have the potency to lead to various lifestyle diseases. Study Design: A prospective, double-blind, randomized, parallel group study (on 80 adult hyperlipidemic patients was conducted for 3 months. During the study, all the subjects were recommended lifestyle modifications, which included, exercise regime and diet counseling; oil quantity consumed was 1 L/person/month for both the groups. The subjects were divided into two groups; one group, continued with their regularly consumed oil whereas, the other was given the test oil. Biomarkers assessed were lipid profile and seven other inflammatory markers were assessed. Results: Low-density lipoprotein cholesterol (LDL-C the primary marker for cardiovascular diseases showed a decrease of 56.07 ± 04.31 mg/dL and 31.98 ± 03.81 mg/dL (P < 0.001 by analysis of variance [ANOVA] from baseline in test and control group, respectively, during 3 months. Similar reduction trends were observed for total cholesterol where −52.31 ± 13.04 mg/dL and 31.98 ± 04.12 mg/dL (P < 0.001 by ANOVA, between the groups were seen in test and control group, respectively. Oxidized LDL and high sensitivity C-reactive protein showed a reduction of 2.23 ± 1.3 units/dL and 0.87 ± 2.85 mg/L in test group whereas; an increase of 1.04 ± 1.73 units/dL and 0.44 ± 2.37 mg/L was seen in the control group

  19. Effect of Novi Sad oil refinery bombardment and fires on soil properties in Vojvodina province

    International Nuclear Information System (INIS)

    Sekulic, P.; Ralev, J.; Zeremski-Skoric, T.

    2002-01-01

    The bombing of the Novi Sad Oil Refinery in 1999 has lead to soil pollution by the products of burning oil and oil derivatives. These products were first carried by winds to the Rimski Sancevi Experiment Field of the Institute of Field and Vegetable Crops (located in the vicinity of the Novi Sad Oil Refinery), where they entered the soil via precipitation. Later, they spread to the city of Novi Sad, its vicinity, and the whole of the Vojvodina province, contaminating the soil. In the present study, we examined the extent to which this soil had been polluted. In 1999, we began to study the level of soil contamination at the Institute's Experiment Field at Rimski Sancevi. In 2000, we carried out the same kind of study in and around the city of Novi Sad, while in 2001 we expanded the study to the whole of Vojvodina. The studies' findings show that the soil reaction has not changed and that the levels of heavy metals in the soil have not exceeded the maximum tolerable concentration (MTC). The presence of PAHs at various concentrations was detected, however. This presence is a result of the fires at the Novi Sad Oil Refinery. (author)

  20. Appraisal of family doctors: an evaluation study.

    NARCIS (Netherlands)

    Lewis, M.I.; Elwyn, G.; Wood, F.

    2003-01-01

    BACKGROUND: Appraisal has evolved to become a key component of workforce management. However, it is not clear from existing proposals for appraisal of doctors whether employers, health authorities or primary care organisations should take responsibility for appraisal processes. AIMS: To evaluate the