Marine fouling assemblages on offshore gas platforms in the southern North Sea

NARCIS (Netherlands)

Stap, van der Tim; Coolen, J.W.P.; Lindeboom, H.J.

2016-01-01

Offshore platforms are known to act as artificial reefs, though there is on-going debate on whether this effect is beneficial or harmful for the life in the surrounding marine environment. Knowing what species exist on and around the offshore platforms and what environmental variables influence this

Using decommissioned offshore oil/gas platforms for nuclear/RO desalination: the ONDP (Offshore Nuclear Desalination Platform)

International Nuclear Information System (INIS)

Nagar, Ankesh

2010-01-01

Oil platforms are manmade concrete and steel giant structures standing high on ocean floor weighing anywhere between 10,000 tonnes and 150,000 tonnes or more and designed to withstand cruel forces of nature, having an average life of 70 years. With the declining petrol reserves within next 30 years, hundreds of platforms will be scheduled for decommissioning. This issue is a hot topic as oil companies tussle with environmentalists and state lawmakers over the future. The cash strapped oil companies have a legal obligation to remove each rig entirely, returning the ocean floor to its original condition. Lean times in oil industry mean a tight cash flow. Safely removing massive structures from deep waters and shipping the pile to the shores for reuse and recycling presents a technological challenge for operators. Some conceptual applications investigated to reuse them are the conversion of offshore structures into fish farms, prisons, military outposts, hotels, for Search and Rescue operations or Centers for Waste Processing and Disposal. Decommissioning oil and gas installation is exorbitantly expensive. On an average, removing a complete platform with or without pipeline in sea waters with 'clean sea approach' costs $15 million to $ 6 billion depending on location. Global warming has adversely affected world climate. Water levels in ground and reservoirs have shown drastic decrement. In future there will be need for more and more water all over the world. Fossil fuel energy based desalination is expensive and not eco-friendly so is dismantling of oil platform with its pipeline. The oil platforms are far located from population, have sufficient tank capacity and pipeline structure to store and pump water to shore. When found economically unviable these mammoth structures with modifications can be installed with 02 or more small or medium sized nuclear reactors such as KLT 40S with required module to desalinate water and co generate electricity which can be sent to

Abundance of Corals on Offshore Oil and Gas Platforms in the Gulf of Mexico

Science.gov (United States)

Kolian, Stephan R.; Sammarco, Paul W.; Porter, Scott A.

2017-08-01

Scleractinian, octocoral, and antipatharian corals have colonized many of the offshore oil and gas platforms in the northern Gulf of Mexico. We surveyed 25 offshore oil and gas platforms for these cnidarians. Few to no corals were detected on inshore, shallow-water structures at data suggest that the offshore platforms located in waters of >25-30 m in the study area are often colonized by these corals. We recommend that structures located in deeper waters should be surveyed for coral and, if the populations are substantial, consider alternate uses for the retired platforms, and leaving them in place, when feasible.

Energetic aspects and opportunities for reusing water on offshore platforms in Campos Basin, Brazil

Directory of Open Access Journals (Sweden)

Victor Magalhães Duarte

2017-09-01

Full Text Available In the drilling and production of oil at sea, a large quantity of potable water used is most commonly transported to oil platforms using offshore supply vessels (OSVs. Sea water desalination is used as well, but only in a few oil platforms. To minimize energy consumption, water supply options were studied. The desalination of seawater and the reusing of streams of grey water and black water were evaluated and compared with the characteristics of the current supply via OSVs. In both desalination and OSV water supply options an electrolytic wastewater treatment plant is used. The objective of this study was to analyze the current situation regarding water supply on offshore platforms located in the Campos Basin, Rio de Janeiro, Brazil, and to propose measures to take advantage of opportunities to reuse water and reduce energy expenditure. Two alternative scenarios were developed that involved the reuse of water that comes from the effluent of a biological wastewater treatment plant (WWTP. Information on the logistics of supplying water to platforms was obtained through direct consultation with companies and sources in the literature. The results show that annual energy consumption (uptake, treatment, transportation, use and waste water treatment of water on offshore platforms is currently 1.89 GWh, and that a reduction of 1.8 GWh of the energy consumed can be achieved using advanced reuse treatments. Energy consumption in the water reuse treatment is more competitive than those of transport by OSVs or seawater desalination.

Offshore Minerals Management Platforms for the Gulf of Mexico (GOM), Geographic NAD83, MMS (2006) [platforms_mms_2006

Data.gov (United States)

Louisiana Geographic Information Center — Offshore Minerals Management Platforms for the Gulf of Mexico (GOM). Identifies the location of platforms in GOM. All platforms existing in the database are included.

Research progress of anti-icing/deicing technologies for polar ships and offshore platforms

Directory of Open Access Journals (Sweden)

XIE Qiang

2017-01-01

Full Text Available The polar regions present adverse circumstances of high humidity and strong air-sea exchange. As such, the surfaces of ships and platforms (oil exploiting and drilling platforms serving in polar regions can easily be frozen by ice accretion, which not only affects the operation of the equipment but also threatens safety. This paper summarizes the status of the anti-icing/deicing technologies of both China and abroad for polar ships and offshore platforms, and introduces the various effects of ice accretion on polar ships and offshore platforms, and the resulting safety impacts. It then reviews existing anti-icing/deicing technologies and methods of both China and abroad, including such active deicing methods as electric heating, infrared heating and ultrasonic guided wave deicing, as well as such passive deicing methods as super hydrophobic coating, sacrificial coating, aqueous lubricating layer coating and low cross-link density (with interfacial slippage coating, summarizes their applicability to polar ships and offshore platforms, and finally discusses their advantages/disadvantages.

An Experimental Study of an Offshore Platform

DEFF Research Database (Denmark)

Brincker, Rune; Asmussen, John Christian; Andersen, Palle

of the multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model. Before the calibration of the ARMA...... model the quality of the measured data have been investigated. The estimated modal parameters and their corresponding variances are used as input to a probability based damage indicator. This indicator indicates, that since the construction of the platform, minor structural changes have taken place....

Load out and offshore lifting of the PRA-1 platform modules; Embarque e icamento offshore dos modulos de PRA-1

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Fernando; Raigorodsky, Jacques; Mitidieri, Jorge L.U.; Ricardi, Paulo S. [Construtora Norberto Odebrecht S.A., Rio de Janeiro, RJ (Brazil)

2008-07-01

The technology innovations are characteristics of offshore Engineering around the world. These technologies just make sense when they aim the productivity, security and costs gains compared to ordinary methods. It is in this context that the proposal of the Consorcio PRA-1 (Odebrecht e UTC) team makes sense, in the definition of basic methodology for the PRA-1 platform construction and installation. Through the innovative concept, It was defined (still in the proposal phase) the basic premise that the modules construction and assembly were onshore ending up that just few hours after the offshore installation the modules should be operational in minimal habitability conditions. This innovative method allowed the lack of Flotel, that is a platform which provide support to the offshore construction and assembly (Flotel represents a high costs to the project) and, as consequence, the contract signature by CONSORCIO PRA-1. This work aims to describe the method used for the LOUD-OUT of the PRA-1 modules and the installation of them on the jacket through a vessel provide with cranes the has performed the lifting. Theses operations became unique in Brazil due its challengers characteristics: Module 12 weight = 7203 tf and Module 35 = 5725 tf. For the accomplishment of the Load-out and offshore lifting, was performed a detailed planning and a high level of subcontract interface management. The operations mentioned above were filmed/photographed and published in the specialized media. (author)

Energetic aspects and opportunities for reusing water on offshore platforms in Campos Basin, Brazil

OpenAIRE

Duarte, Victor Magalhães; Queiroz, Luciano Matos; Torres, Ednildo Andrade; Kiperstok, Asher

2017-01-01

Abstract In the drilling and production of oil at sea, a large quantity of potable water used is most commonly transported to oil platforms using offshore supply vessels (OSVs). Sea water desalination is used as well, but only in a few oil platforms. To minimize energy consumption, water supply options were studied. The desalination of seawater and the reusing of streams of grey water and black water were evaluated and compared with the characteristics of the current supply via OSVs. In both ...

MUDMAP: Simulation model for releases from offshore platforms

International Nuclear Information System (INIS)

Anon.

1994-01-01

The present article deals with a Norwegian developed simulation model dubbed MUDMAP. MUDMAP is a numerical model that simulates releases of drill muds and cuttings, produced water and other substances from offshore platforms. The model is envisioned as an advanced tool to assist in the rapid design and placement of intakes and release pipes on platforms, as well as in evaluating potential long-term impacts in the water and on the sea floor. MUDMAP allows rapid visual/graphical analysis of potential alternative solutions under various realistic environmental conditions, and for planning and executing platform monitoring projects. 4 figs

Offshore Platform Hydrocarbon Risk Assessment – OPHRA: Feasibility

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Kozine, Igor; Markert, Frank

This report describes the feasibility demonstration of a new method to perform risk assessments for offshore platforms. This method simulates the following phenomena as concurrent sequences of events using the Arena® Discrete Event Simulation (DES) software (version 14.50.00): • Release, ignition...

Methodology for development of risk indicators for offshore platforms

International Nuclear Information System (INIS)

Oeien, K.; Sklet, S.

1999-01-01

This paper presents a generic methodology for development of risk indicators for petroleum installations and a specific set of risk indicators established for one offshore platform. The risk indicators should be used to control the risk during operation of platforms. The methodology is purely risk-based and the basis for development of risk indicators is the platform specific quantitative risk analysis (QRA). In order to identify high risk contributing factors, platform personnel are asked to assess whether and how much the risk influencing factors will change. A brief comparison of probabilistic safety assessment (PSA) for nuclear power plants and quantitative risk analysis (QRA) for petroleum platforms is also given. (au)

Modeling and Simulation of Offshore Wind Power Platform for 5 MW Baseline NREL Turbine

Science.gov (United States)

Roni Sahroni, Taufik

2015-01-01

This paper presents the modeling and simulation of offshore wind power platform for oil and gas companies. Wind energy has become the fastest growing renewable energy in the world and major gains in terms of energy generation are achievable when turbines are moved offshore. The objective of this project is to propose new design of an offshore wind power platform. Offshore wind turbine (OWT) is composed of three main structures comprising the rotor/blades, the tower nacelle, and the supporting structure. The modeling analysis was focused on the nacelle and supporting structure. The completed final design was analyzed using finite element modeling tool ANSYS to obtain the structure's response towards loading conditions and to ensure it complies with guidelines laid out by classification authority Det Norske Veritas. As a result, a new model of the offshore wind power platform for 5 MW Baseline NREL turbine was proposed. PMID:26550605

[Relationship between occupational stress and mental health in offshore oil platform workers].

Science.gov (United States)

Wu, Hongtao; Xiao, Taiqin; Zou, Jianfang; Shan, Yongle; Li, Zijian

2014-02-01

To investigate the relationship between occupational stress and mental health in offshore oil platform workers and to provide a scientific basis for protection of their mental health. A total of 768 workers on offshore oil platform were surveyed with the Occupational Stress Inventory Revised Edition and Symptom Check List-90 (SCL-90). The total score of Occupational Role Questionnaire (ORQ) for the workers (160.27±24.63) was significantly lower than the national norm (166.52±27.01) (P 0.05), but the items of recreation, social support, and rational/cognitive found significant difference (P work seniority, education background, drinking, role overload, role insufficiency, role ambiguity, responsibility, physical environment, and rational/cognitive conduct impacted the score of SCL-90 (P mental health of workers on offshore oil platform is related to occupational stress, and role overload, role ambiguity, physical environment, and rational/cognitive conduct, etc, are closely associated with the workers' mental health.

Modeling and Simulation of Offshore Wind Power Platform for 5 MW Baseline NREL Turbine

Directory of Open Access Journals (Sweden)

Taufik Roni Sahroni

2015-01-01

Full Text Available This paper presents the modeling and simulation of offshore wind power platform for oil and gas companies. Wind energy has become the fastest growing renewable energy in the world and major gains in terms of energy generation are achievable when turbines are moved offshore. The objective of this project is to propose new design of an offshore wind power platform. Offshore wind turbine (OWT is composed of three main structures comprising the rotor/blades, the tower nacelle, and the supporting structure. The modeling analysis was focused on the nacelle and supporting structure. The completed final design was analyzed using finite element modeling tool ANSYS to obtain the structure’s response towards loading conditions and to ensure it complies with guidelines laid out by classification authority Det Norske Veritas. As a result, a new model of the offshore wind power platform for 5 MW Baseline NREL turbine was proposed.

Structural Integrity Management for Fixed Offshore Platforms in Malaysia

OpenAIRE

Narayanan Sambu Potty; Mohammad Kabir B. Mohd Akram

2009-01-01

Structural Integrity Management (SIM) is important for the protection of offshore crew, environment, business assets and company and industry reputation. API RP 2A contained guidelines for assessment of existing platforms mostly for the Gulf of Mexico (GOM). ISO 19902 SIM framework also does not specifically cater for Malaysia. There are about 200 platforms in Malaysia with 90 exceeding their design life. The Petronas Carigali Sdn Bhd (PCSB) uses the Asset Integrity Management ...

Digital-Control-Based Approximation of Optimal Wave Disturbances Attenuation for Nonlinear Offshore Platforms

Directory of Open Access Journals (Sweden)

Xiao-Fang Zhong

2017-12-01

Full Text Available The irregular wave disturbance attenuation problem for jacket-type offshore platforms involving the nonlinear characteristics is studied. The main contribution is that a digital-control-based approximation of optimal wave disturbances attenuation controller (AOWDAC is proposed based on iteration control theory, which consists of a feedback item of offshore state, a feedforward item of wave force and a nonlinear compensated component with iterative sequences. More specifically, by discussing the discrete model of nonlinear offshore platform subject to wave forces generated from the Joint North Sea Wave Project (JONSWAP wave spectrum and linearized wave theory, the original wave disturbances attenuation problem is formulated as the nonlinear two-point-boundary-value (TPBV problem. By introducing two vector sequences of system states and nonlinear compensated item, the solution of introduced nonlinear TPBV problem is obtained. Then, a numerical algorithm is designed to realize the feasibility of AOWDAC based on the deviation of performance index between the adjacent iteration processes. Finally, applied the proposed AOWDAC to a jacket-type offshore platform in Bohai Bay, the vibration amplitudes of the displacement and the velocity, and the required energy consumption can be reduced significantly.

Minimising life cycle costs of automated valves in offshore platforms

Energy Technology Data Exchange (ETDEWEB)

Yli-Petays, Juha [Metso Automation do Brasil Ltda., Rio de Janeiro, RJ (Brazil); Niemela, Ismo [Metso Automation, Imatra (Finland)

2012-07-01

Automated process valves play an essential role in offshore platforms operation. If you are able to optimize their operation and maintenance activities you can receive extensive operational savings with minimal investment. Valves used in offshore platforms doesn't differentiate that much from the valves used in downstream but there are certain specialties, which makes the operations more challenging in offshore: Process valves are more difficult to access and maintain because of space limitations. Also spare part inventories and deliveries are challenging because of offshore platform's remote location. To overcome these challenges usage of digital positioners with diagnostic features has become more common because predictive maintenance capabilities enable possibilities to plan the maintenance activities and this way optimise the spare part orders regarding to valves. There are intelligent controllers available for control valves, automated on/off valves as well as ESD-valves and whole network of automated valves on platforms can be controlled by intelligent valve controllers. This creates many new opportunities in regards of optimized process performance or predictive maintenance point-of-view. By means of intelligent valve controllers and predictive diagnostics, condition monitoring and maintenance planning can also be performed remotely from an onshore location. Thus, intelligent valve controllers provide good way to minimize spending related to total cost of ownership of automated process valves. When purchase value of control valve represent 20% of TCO, intelligent positioner and predictive maintenance methods can enable as high as 30% savings over the life cycle of asset so basically it benefit savings higher than whole investment of monitored asset over its life cycle. This is mainly achieved through the optimized maintenance activities since real life examples has shown that with time based maintenance (preventive maintenance) approach 70% of

Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms

DEFF Research Database (Denmark)

Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi-objective......This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi....... Findings indicate that using the power production, the volume of the recuperator and the net present value as objective functions the optimal pressure ratio (2.52) and the exhaust gas temperature (178.8 °C) differ from the values (2.80 and 145.5 °C) calculated using the theory of the power maximization...

Learning control for riser-slug elimination and production-rate optimization for an offshore oil and gas production process

DEFF Research Database (Denmark)

Pedersen, Simon; Løhndorf, Petar Durdevic; Yang, Zhenyu

2014-01-01

, (ii) maximizing the production rate at the riser of an offshore production platform, by manipulating a topside choke valve through a learning switching model-free PID controller. The results show good steady-state performance, though a long settling time due to the unknown reference for no slugging...

Offshore platform integration and floatover technology

CERN Document Server

Liu, Gengshen

2017-01-01

This book discusses offshore platform integration technology, focusing on the floatover methodology and its applications. It also addresses topics related to safety and cost-effectiveness, as well as ensuring the success of a project through careful planning and established detailed operation procedure/working manuals, which are rarely found in the published literature. Unlike other publications in this area, the book not only includes details of technology development, but also presents real project cases in the discussion to make it more comprehensible. Each topic is illustrated with carefully created sketches to show the complex operation procedures. .

Voltage margin control for offshore multi-use platform integration

DEFF Research Database (Denmark)

Mier, V.; Casielles, P.G.; Koto, J.

This paper discusses a multiterminal direct current (MTDC) connection proposed for integration of offshore multi-use platforms into continental grids. Voltage source converters (VSC) were selected for their suitability for multiterminal dc systems and for their flexibility in control. A five...... terminal VSC-MTDC which includes offshore generation, storage, loads and ac connection, was modeled and simulated in DigSILENT Power Factory software. Voltage margin method has been used for reliable operation of the MTDC system without the need of fast communication. Simulation results show......, sell or store energy attending to the price in the electricity market....

Development of jacket platform tsunami risk rating system in waters offshore North Borneo

Science.gov (United States)

Lee, H. E.; Liew, M. S.; Mardi, N. H.; Na, K. L.; Toloue, Iraj; Wong, S. K.

2016-09-01

This work details the simulation of tsunami waves generated by seaquakes in the Manila Trench and their effect on fixed oil and gas jacket platforms in waters offshore North Borneo. For this study, a four-leg living quarter jacket platform located in a water depth of 63m is modelled in SACS v5.3. Malaysia has traditionally been perceived to be safe from the hazards of earthquakes and tsunamis. Local design practices tend to neglect tsunami waves and include no such provisions. In 2004, a 9.3 M w seaquake occurred off the northwest coast of Aceh, which generated tsunami waves that caused destruction in Malaysia totalling US 25 million and 68 deaths. This event prompted an awareness of the need to study the reliability of fixed offshore platforms scattered throughout Malaysian waters. In this paper, we present a review of research on the seismicity of the Manila Trench, which is perceived to be high risk for Southeast Asia. From the tsunami numerical model TUNA-M2, we extract computer-simulated tsunami waves at prescribed grid points in the vicinity of the platforms in the region. Using wave heights as input, we simulate the tsunami using SACS v5.3 structural analysis software of offshore platforms, which is widely accepted by the industry. We employ the nonlinear solitary wave theory in our tsunami loading calculations for the platforms, and formulate a platform-specific risk quantification system. We then perform an intensive structural sensitivity analysis and derive a corresponding platform-specific risk rating model.

33 CFR 165.155 - Northville Industries Offshore Platform, Riverhead, Long Island, New York-safety zone.

Science.gov (United States)

2010-07-01

... York, 1 mile North of the Riverhead shoreline at 41°00″ N, 072°38″ W, while a Liquefied Petroleum Gas (LPG) vessel is moored at the Offshore Platform. The safety zone remains in effect until the LPG vessel... Offshore Platform of LPG vessels via Marine Safety Information Radio Broadcast. [CGD3 85-86, 51 FR 37181...

Use of offshore mooring platform for sea wave motion analysis

International Nuclear Information System (INIS)

Cicconi, G.; Dagnino, I.; Papa, L.

1979-01-01

An offshore mooring platform for supertankers may often turn out to be an ideal solution for the problem of installing a meteorological station. Its location may be particularly desirable for the purpose of recording and analysing sea wave motion in deep water or in the intermediate zone between shallow and deep water. The preliminary results obtained through the operation of a subsurface sensor at the mooring platform off the harbour of Genova are reported. (author)

Use of offshore mooring platform for sea wave motion analysis

Energy Technology Data Exchange (ETDEWEB)

Cicconi, G.; Dagnino, I.; Papa, L. (Genova Univ. (Italy). Ist. Geofisica e Geodetico); Basano, L.; Ottonello, P. (Genoa Univ. (Italy))

An offshore mooring platform for supertankers may often turn out to be an ideal solution for the problem of installing a meteorological station. Its location may be particularly desirable for the purpose of recording and analysing sea wave motion in deep water or in the intermediate zone between shallow and deep water. The preliminary results obtained through the operation of a subsurface sensor at the mooring platform off the harbour of Genova are reported.

Troll and Heidrun: A day of superlatives. The latest word in platform technology for Norway`s offshore industry; Troll und Heidrun: Tag der Superlative. Modernste Plattformtechnologie fuer Norwegens Offshore-Industrie

Energy Technology Data Exchange (ETDEWEB)

Kumpch, J U

1995-09-01

May 10, 1995, was a milestone in the history of the European power industry. This was the day when the construction of `Troll A` platform was finished in Vatsfjord, north of Stavanger, and the five-day haul to the world`s biggest gas reserves was started. At the same time, energy politicians from all over the world took part in the christening of `Heidrun` platform, in Gandsfjord south of Stavanger. From August onwards, this platform will extract oil from the Haltenbank, the world`s northernmost offshore field. `Troll` and `Heidrun` are the latest word in platform technology and, at the same time, also indicate a turning point in the Norwegian offshore industry. Experts and politicians agree that `Troll A` is the `last of the dinosaurs`, and there will be no platforms bigger than `Heidrun`. Oil fields are getting smaller, and the advancements in production technology permit smaller and less complex installations. (orig.) [Deutsch] Der 10. Mai 1995 ist ein Meilenstein in der Geschichte der europaeischen Energiewirtschaft. An diesem Tag wurde im Vatsfjord noerdlich von Stavanger der Bau der Plattform Troll A abgeschlossen und mit dem fuenftaegigen Schlepp zu den weltgroessten Gasvorkommen begonnen. Im Gandsfjord etwas suedlich der norwegischen Oelhauptstadt waren Energiepolitiker aus aller Welt zu Gast, als zu gleicher Zeit die Heidrun-Plattform getauft wurde. Diese Anlage wird ab August das Oel von der Haltenbank, dem noerdlichsten Offshore-Feld ueberhaupt, foerdern. Troll und Heidrun sind modernste Plattformtechnologie und gleichzeitige Wendepunkt in der norwegischen Offshore-Industrie. Experten und Politiker sind sich einig: Die Troll A-Plattform ist `der letzte Dinosaurier`, die Groesse von Heidrun wird nicht mehr uebertroffen. Die Felder werden kleiner, und die Foerdertechnologie erlaubt bescheidenere Installationen. (orig.)

Waste heat recovery technologies for offshore platforms

DEFF Research Database (Denmark)

Pierobon, Leonardo; Benato, Alberto; Scolari, E.

2014-01-01

This article aims at finding the most suitable waste heat recovery technology for existing and future offshore facilities. The technologies considered in this work are the steam Rankine cycle, the air bottoming cycle and the organic Rankine cycle. A multi-objective optimization approach is employed...... to attain optimal designs for each bottoming unit by selecting specific functions tailored to the oil and gas sector, i.e. yearly CO2 emissions, weight and economic revenue. The test case is the gas turbine-based power system serving an offshore platform in the North Sea. Results indicate that the organic...... and of the primary heat exchanger, organic Rankine cycle turbogenerators appear thus to be the preferred solution to abate CO2 emissions and pollutants on oil and gas facilities. As a practical consequence, this paper provides guidelines for the design of high-efficiency, cost-competitive and low-weight power...

Grid Simulator for Testing a Wind Turbine on Offshore Floating Platform

Energy Technology Data Exchange (ETDEWEB)

Gevorgian, V.

2012-02-01

An important aspect of such offshore testing of a wind turbine floating platform is electrical loading of the wind turbine generator. An option of interconnecting the floating wind turbine with the onshore grid via submarine power cable is limited by many factors such as costs and associated environmental aspects (i.e., an expensive and lengthy sea floor study is needed for cable routing, burial, etc). It appears to be a more cost effective solution to implement a standalone grid simulator on a floating platform itself for electrical loading of the test wind turbine. Such a grid simulator must create a stable fault-resilient voltage and frequency bus (a micro grid) for continuous operation of the test wind turbine. In this report, several electrical topologies for an offshore grid simulator were analyzed and modeled.

Sediment porewater toxicity assessment studies in the vicinity of offshore oil and gas production in the Gulf of Mexico

International Nuclear Information System (INIS)

Carr, R. S.; Chapman, D. C.; Presley, B. J.; Biedenbach, J. M.; Robertson, L.

1996-01-01

Sediment chemical analyses and porewater toxicity tests were conducted in the vicinity of five offshore oil and gas platforms in the Gulf of Mexico to determine the potential long-term environmental impacts of offshore oil and gas exploration and production. Evidence of toxicity was obtained from four of the five platforms from data on sea urchin fertilization and embryonic development. The majority of toxic samples were collected within 150 m of the platform. Sediment concentrations of several metals were well in excess of sediment quality assessment guidelines at a number of stations. Porewater metal concentrations were found to be high enough to account for the observed toxicity. The general conclusion reached from these toxicity tests was that the contaminant-induced impacts from the offshore platforms were confined to a limited area in the immediate vicinity of the platform. 23 refs., 8 tabs., 2 figs

Environmental load factors and system strength evaluation of offshore jacket platforms

CERN Document Server

Nizamani, Zafarullah

2015-01-01

This book presents a study for the determination of environmental load factors for Jacket Platforms in Malaysia and a methodology to determine the life extension of aging platforms. The simplified methods described here could be used for determining not only structural reliability but also safety factors. Its content is particularly interesting to design and maintenance engineers who are working in offshore or onshore industry.

An air quality emission inventory of offshore operations for the exploration and production of petroleum by the Mexican oil industry

Science.gov (United States)

Villasenor, R.; Magdaleno, M.; Quintanar, A.; Gallardo, J. C.; López, M. T.; Jurado, R.; Miranda, A.; Aguilar, M.; Melgarejo, L. A.; Palmerín, E.; Vallejo, C. J.; Barchet, W. R.

An air quality screening study was performed to assess the impacts of emissions from the offshore operations of the oil and gas exploration and production by Mexican industry in the Campeche Sound, which includes the states of Tabasco and Campeche in southeast Mexico. The major goal of this study was the compilation of an emission inventory (EI) for elevated, boom and ground level flares, processes, internal combustion engines and fugitive emissions. This inventory is so far the most comprehensive emission register that has ever been developed for the Mexican petroleum industry in this area. The EI considered 174 offshore platforms, the compression station at Atasta, and the Maritime Ports at Dos Bocas and Cayo Arcas. The offshore facilities identified as potential emitters in the area were the following: (1) trans-shipment stations, (2) a maritime floating port terminal, (3) drilling platforms, (4) crude oil recovering platforms, (5) crude oil production platforms, (6) linking platforms, (7) water injection platforms, (8) pumping platforms, (9) shelter platforms, (10) telecommunication platforms, (11) crude oil measurement platforms, and (12) flaring platforms. Crude oil storage tanks, helicopters and marine ship tankers were also considered to have an EI accurate enough for air quality regulations and mesoscale modeling of atmospheric pollutants. Historical ambient data measure at two onshore petroleum facilities were analyzed to measure air quality impacts on nearby inhabited coastal areas, and a source-receptor relationship for flares at the Ixtoc marine complex was performed to investigate health-based standards for offshore workers. A preliminary air quality model simulation was performed to observe the transport and dispersion patterns of SO 2, which is the main pollutant emitted from the offshore platforms. The meteorological wind and temperature fields were generated with CALMET, a diagnostic meteorological model that used surface observations and upper

Load Identification of Offshore Platform for Fatigue Life Estimation

DEFF Research Database (Denmark)

Perisic, Nevena; Kirkegaard, Poul Henning; Tygesen, Ulf T.

2014-01-01

of the structure and the discrete Kalman filter which recursively estimates unknown states of the system in real time. As a test-case, the algorithm is designed to estimate the equivalent total loading forces of the structure. The loads are estimated from noised displacement measurements of a single location...... on the topside of the offshore structure. The method is validated using simulated data for two wave loading cases: regular and irregular wave loadings.......The lifetime of an offshore platform is typically governed by accumulated fatigue damage. Thus, the load time history is an essential parameter for prediction of the lifetime of the structure and its components. Consequently, monitoring of structural loads is of special importance in relation to re...

Evaluation of stress resultant of offshore jacket platform using neural network

Digital Repository Service at National Institute of Oceanography (India)

Mandal, S.; Hegde, G.; Gupta, K.G.

The safety of an offshore platform depends on the predicting environmental phenomena such as wind, current, wave, seismic loadings and accurate calculation of responses of the structure to these loads and determining the strength of the structure...

The impact of water depth on safety and environmental performance in offshore oil and gas production

International Nuclear Information System (INIS)

Muehlenbachs, Lucija; Cohen, Mark A.; Gerarden, Todd

2013-01-01

This paper reports on an empirical analysis of company-reported incidents on oil and gas production platforms in the Gulf of Mexico between 1996 and 2010. During these years, there was a dramatic increase in the water depths at which offshore oil and gas is extracted. Controlling for platform characteristics such as age, quantity of oil and gas produced, and number of producing wells, we find that incidents (such as blowouts, injuries, and oil spills) are positively correlated with deeper water. Controlling for these and other characteristics, for an average platform, each 100 feet of added depth increases the probability of a company-reported incident by 8.5%. While further research into the causal connections between water depth and platform risks is warranted, this study highlights the potential value of increased monitoring of deeper water platforms. - Highlights: ► Analysis of performance indicators for oil production platforms in Gulf of Mexico. ► In recent years there have been dramatic increases in the water depths at which offshore oil and gas is extracted. ► Self-reported incidents (e.g. blowouts, injuries, spills) increase with water depth

Access Platforms for Offshore Wind Turbines Using Gratings

DEFF Research Database (Denmark)

Andersen, Thomas Lykke; Rasmussen, Michael R.

2008-01-01

The paper deals with forces generated by a stationary jet on different types of gratings and a solid plate. The force reduction factors for the different gratings compared to the solid plate mainly depend on the porosity of the gratings, but the geometry of the grating is also of some importance........ The derived reduction factors are expected to be applicable to design of offshore wind turbine access platforms with gratings where slamming also is an important factor....

Bird interactions with offshore oil and gas platforms: review of impacts and monitoring techniques.

Science.gov (United States)

Ronconi, Robert A; Allard, Karel A; Taylor, Philip D

2015-01-01

Thousands of oil and gas platforms are currently operating in offshore waters globally, and this industry is expected to expand in coming decades. Although the potential environmental impacts of offshore oil and gas activities are widely recognized, there is limited understanding of their impacts on migratory and resident birds. A literature review identified 24 studies and reports of bird-platform interactions, most being qualitative and half having been peer-reviewed. The most frequently observed effect, for seabirds and landbirds, is attraction and sometimes collisions associated with lights and flares; episodic events have caused the deaths of hundreds or even thousands of birds. Though typically unpredictable, anecdotally, it is known that poor weather, such as fog, precipitation and low cloud cover, can exacerbate the effect of nocturnal attraction to lights, especially when coincidental with bird migrations. Other effects include provision of foraging and roosting opportunities, increased exposure to oil and hazardous environments, increased exposure to predators, or repulsion from feeding sites. Current approaches to monitoring birds at offshore platforms have focused on observer-based methods which can offer species-level bird identification, quantify seasonal patterns of relative abundance and distribution, and document avian mortality events and underlying factors. Observer-based monitoring is time-intensive, limited in spatial and temporal coverage, and suffers without clear protocols and when not conducted by trained, independent observers. These difficulties are exacerbated because deleterious bird-platform interaction is episodic and likely requires the coincidence of multiple factors (e.g., darkness, cloud, fog, rain conditions, occurrence of birds in vicinity). Collectively, these considerations suggest a need to implement supplemental systems for monitoring bird activities around offshore platforms. Instrument-based approaches, such as radar

Social impact assessment: identification, management and follow-up of community concerns associated with construction of the Hibernia offshore platform

International Nuclear Information System (INIS)

Storey, K.

2003-01-01

Social impact Assessment (SIA) is the systematic analysis, in advance of the likely impacts of a proposed action, that considers 'all social and cultural consequences to human populations of any public or private actions that alter the ways in which people live, work, play, relate to one another, organize to meet their needs, and generally cope as members of society' (US Department of Commerce 1994). Through the SIA for the construction of the Hibernia offshore oil platform concern, and values of local area residents were identified and a management strategy designed to minimise social disruption associated with the project. Monitoring studies showed that the strategy was effective and that few negative social impacts occurred. The Hibernia offshore oil field, was discovered on the Grand Banks, east of the island of Newfoundland, in 1979. The distance from shore (315 km), its isolation, the periodic presence of sea ice, icebergs and fog, and frequently severe wave and wind conditions, make these waters an extremely hostile work environment. Primarily to maximize human safety, the final engineering design chosen for the project was a fixed, gravity base system (GBS). The platform functions as the main drilling and production unit, the first stage processing facility, oil storage and accommodations base for the offshore crews. The concrete base of the platform, one of the five super-modules that make up the top-sides of the platform and eight of tile smaller top-sides-mounted modules, were fabricated in Newfoundland and the entire platform assembled at Bull Arm, Trinity Bay. (author)

Modal Analysis of an Offshore Platform using Two Different ARMA Approaches

DEFF Research Database (Denmark)

Brincker, Rune; Andersen, P.; Martinez, M. E.

1996-01-01

In the present investigation, multi-channel response measurements on an offshore platform subjected to wave loads is analysed using Auto Regressive Moving Average (ARMA) models. Two different estimation schemes are used and the results are compared. In the first approach, a scalar ARMA model...

Inadequate environmental monitoring around offshore oil and gas platforms on the Grand Bank of Eastern Canada: are risks to marine birds known?

Science.gov (United States)

Burke, C M; Montevecchi, W A; Wiese, F K

2012-08-15

Petroleum exploration and production on the Grand Bank of eastern Canada overlaps with productive marine habitat that supports over 40 million marine birds annually. Environmental assessments for oil and gas projects in the region predict insignificant adverse effects on marine birds from oil spills, incineration in platform flares and collisions. Limited baseline data on seasonal occupancies and a failure to quantify the nature and extent of marine bird attraction to platforms and related mortality undermines these assessments. We conducted 22 surveys to offshore platforms on the Grand Bank during 1999-2003 to measure avian associations with platforms and to determine the level of monitoring needed to assess the risks to marine birds. We document seasonal shifts in marine bird occurrences and higher densities of auks (fall) and shearwaters (summer) around platforms relative to surrounding areas. The limited temporal and spatial coverage of our surveys is more robust than existing industry monitoring efforts, yet it is still inadequate to quantify the scale of marine bird associations with platforms or their associated mortality risks. Systematic observations by independent biologists on vessels and platforms are needed to generate reliable assessments of risks to marine birds. Instead, the regulatory body for offshore oil and gas in eastern Canada (Canada - Newfoundland and Labrador Offshore Petroleum Board; C-NLOPB) supports industry self-reporting as the accepted form of environmental monitoring. Conflicting responsibilities of oil and gas regulatory agencies for both energy development and environmental monitoring are major barriers to transparency, unbiased scientific inquiry and adequate environmental protection. Similar conflicts with the oil and gas regulatory body in the United States, the former Minerals and Management Service (MMS) were identified by the U.S. President as a major contributor to the Deepwater Horizon disaster in the Gulf of Mexico. The

Modal Analysis of an Offshore Platform Using Two Different ARMA Approaches

DEFF Research Database (Denmark)

Brincker, Rune; Andersen, P.; Martinez, M. E.

In the present investigation, multi-channel response measurements on an offshore platform subjected to wave loads is analysed using Auto regressive Moving Average(ARMA) models. two different estimation schemes are used and the results are compared. In the first approach, a scalar ARMA model is us...

Investigation of the effects of platform motion on the aerodynamics of a floating offshore wind turbine

Institute of Scientific and Technical Information of China (English)

万德成

2016-01-01

Along with the flourishing of the wind energy industry, floating offshore wind turbines have aroused much interest among the academia as well as enterprises. In this paper, the effects of the supporting platform motion on the aerodynamics of a floating wind turbine are studied using the open source CFD framework OpenFOAM. The platform motion responses, including surge, heave and pitch, are superimposed onto the rotation of the wind turbine. Thrust and torque on the wind turbine are compared and analysed for the cases of different platform motion patterns together with the flow field. It is shown that the movement of the supporting platform can have large influences on a floating offshore wind turbine and thus needs to be considered carefully during the design process.

Modelling, analysis and optimisation of energy systems on offshore platforms

DEFF Research Database (Denmark)

Nguyen, Tuong-Van

of oil and gas facilities, (ii) the means to reduce their performance losses, and (iii) the systematic design of future plants. This work builds upon a combination of modelling tools, performance evaluation methods and multi-objective optimisation routines to reproduce the behaviour of five offshore......Nowadays, the offshore production of oil and gas requires on-site processing, which includes operations such as separation, compression and purification. The offshore system undergoes variations of the petroleum production rates over the field life – it is therefore operated far from its nominal...... with the combustion, pressure-change and cooling operations, but these processes are ranked differently depending on the plant layout and on the field production stage. The most promising improvements consist of introducing a multi-level production manifold, avoiding anti-surge gas recirculation, installing a waste...

Reusable platform concepts

International Nuclear Information System (INIS)

Gudmestad, O.T.; Sparby, B.K.; Stead, B.L.

1993-01-01

There is an increasing need to reduce costs of offshore production facilities in order to make development of offshore fields profitable. For small fields with short production time there is in particular a need to investigate ways to reduce costs. The idea of platform reuse is for such fields particularly attractive. This paper will review reusable platform concepts and will discuss their range of application. Particular emphasis will be placed on technical limitations. Traditional concepts as jackups and floating production facilities will be discussed by major attention will be given to newly developed ideas for reuse of steel jackets and concrete structures. It will be shown how the operator for several fields can obtain considerable savings by applying such reusable platform concepts

Toxicity of sediment pore water associated with offshore oil and gas platforms in the Gulf of Mexico

International Nuclear Information System (INIS)

Carr, R.S.; Chapman, D.C.

1993-01-01

As a part of a multidisciplinary program to assess the long-term impacts of offshore petroleum production in the Gulf of Mexico, a series of sediment porewater toxicity tests were conducted. Sediments were samples from five petroleum production platforms along five radial transects. Pore water was extracted from the sediment using a pressure extraction device, centrifuged, and frozen for later toxicity testing and chemical analysis. The sea urchin (Arbacia punctulata) embryological development assay and fertilization assay were used to assess porewater toxicity. Significant decreases in normal development of embryos was observed at 14 stations and fertilization was reduced at three stations. All stations with reduced fertilization also showed impaired development in the embryological development assay. All but three toxic sites were within 150 m of the platform. The six most toxic stations were at one platform near the Flower Garden reef, occurring near the platform along three radii; toxicity was always greater at the first site on a radium than at the second. Toxicity is discussed in relation to metal and hydrocarbon concentrations in whole sediment and in pore water

UV disinfection of injection and drinking water - an accepted method on offshore oil platforms

International Nuclear Information System (INIS)

Brunner, H.; Klein, H.P.

1985-01-01

Ultraviolet disinfection packages have been developed for the treatment of drinking water and injection water on offshore oil platforms. Large-scale tests with sulphate reducing bacteria out outlined. (Auth.)

Diesel supply planning for offshore platforms by a mathematical model based on the vehicle routing problem with replenishment

Energy Technology Data Exchange (ETDEWEB)

Fiorot Astoures, H.; Alvarenga Rosa, R. de; Silva Rosa, A.

2016-07-01

Oil exploration in Brazil is mainly held by offshore platforms which require the supply of several products, including diesel to maintain its engines. One strategy to supply diesel to the platforms is to keep a vessel filled with diesel nearby the exploration basin. An empty boat leaves the port and goes directly to this vessel, then it is loaded with diesel. After that, it makes a trip to supply the platforms and when the boat is empty, it returns to the vessel to be reloaded with more diesel going to another trip. Based on this description, this paper proposes a mathematical model based on the Vehicle Routing Problem with Intermediate Replenishment Facilities (VRPIRF) to solve the problem. The purpose of the model is to plan the routes for the boats to meet the diesel requests of the platform. Given the fact that in the literature, papers about the VRPIRF are scarce and papers about the VRPIRF applied to offshore platforms were not found in the published papers, this paper is important to contribute with the evolution of this class of problem, bringing also a solution for a real application that is very important for the oil and gas business. The mathematical model was tested using the CPLEX 12.6. In order to assess the mathematical model, tests were done with data from the major Brazilian oil and gas company and several strategies were tested. (Author)

Techno-Economic Comparison of Onshore and Offshore Underground Coal Gasification End-Product Competitiveness

Directory of Open Access Journals (Sweden)

Natalie Christine Nakaten

2017-10-01

Full Text Available Underground Coal Gasification (UCG enables the utilisation of coal reserves that are currently not economically exploitable due to complex geological boundary conditions. Hereby, UCG produces a high-calorific synthesis gas that can be used for generation of electricity, fuels and chemical feedstock. The present study aims to identify economically competitive, site-specific end-use options for onshore and offshore produced UCG synthesis gas, taking into account the capture and storage (CCS and/or utilisation (CCU of resulting CO 2 . Modelling results show that boundary conditions that favour electricity, methanol and ammonia production expose low costs for air separation, high synthesis gas calorific values and H 2 /N 2 shares as well as low CO 2 portions of max. 10%. Hereby, a gasification agent ratio of more than 30% oxygen by volume is not favourable from economic and environmental viewpoints. Compared to the costs of an offshore platform with its technical equipment, offshore drilling costs are negligible. Thus, uncertainties related to parameters influenced by drilling costs are also negligible. In summary, techno-economic process modelling results reveal that scenarios with high CO 2 emissions are the most cost-intensive ones, offshore UCG-CCS/CCU costs are twice as high as the onshore ones, and yet all investigated scenarios except from offshore ammonia production are competitive on the European market.

Deep Panuke offshore gas development comprehensive study report : Executive summary

International Nuclear Information System (INIS)

2002-10-01

A project was proposed by EnCana Corporation (EnCana) for the development of the Deep Panuke Offshore Gas Development Project. Located offshore the Scotian Shelf, approximately 175 kilometres southeast of Goldboro, Nova Scotia and 250 kilometres southeast of Halifax, the development of this natural gas reservoir would allow EnCana to derive economic benefit from licences issued under the Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation Act and the Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation (Nova Scotia) Act. The Canadian Environmental Assessment Act required that a comprehensive study report be prepared, and the results were presented in this document. Consisting of three bottom-founded platforms in a water depth of approximately 40 metres, the wellhead platform would be used for dry wellheads, wellhead control system, and production manifolds. All power generation and processing equipment would be located on the production platform, and the accommodations platform would consist of the utilities, helicopter landing pad, refueling station and crew accommodations. It was determined that the Deep Panuke project was unlikely to result in adverse environmental effects. The offshore oil and gas industry in Atlantic Canada would benefit from this development as a result of the establishment of a viable facility and operation

Marine Fouling Assemblages on Offshore Gas Platforms in the Southern North Sea: Effects of Depth and Distance from Shore on Biodiversity.

Science.gov (United States)

van der Stap, Tim; Coolen, Joop W P; Lindeboom, Han J

2016-01-01

Offshore platforms are known to act as artificial reefs, though there is on-going debate on whether this effect is beneficial or harmful for the life in the surrounding marine environment. Knowing what species exist on and around the offshore platforms and what environmental variables influence this species assemblage is crucial for a better understanding of the impact of offshore platforms on marine life. Information on this is limited for offshore platforms in the southern North Sea. This study aims to fill this gap in our knowledge and to determine how the composition and the abundance of species assemblages changes with depth and along a distance-from-shore gradient. The species assemblages on five offshore gas platforms in the southern North Sea have been inventoried using Remotely Operated Vehicles inspection footage. A total of 30 taxa were identified. A Generalised Additive Model of the species richness showed a significant non-linear relation with water depth (p = 0.001): from a low richness in shallow waters it increases with depth until 15-20 m, after which richness decreases again. Using PERMANOVA, water depth (p≤0.001), community age (p≤0.001) and the interaction between distance from shore and community age (p≤0.001) showed a significant effect on the species assemblages. Future research should focus on the effect additional environmental variables have on the species assemblages.

Marine Fouling Assemblages on Offshore Gas Platforms in the Southern North Sea: Effects of Depth and Distance from Shore on Biodiversity.

Directory of Open Access Journals (Sweden)

Tim van der Stap

Full Text Available Offshore platforms are known to act as artificial reefs, though there is on-going debate on whether this effect is beneficial or harmful for the life in the surrounding marine environment. Knowing what species exist on and around the offshore platforms and what environmental variables influence this species assemblage is crucial for a better understanding of the impact of offshore platforms on marine life. Information on this is limited for offshore platforms in the southern North Sea. This study aims to fill this gap in our knowledge and to determine how the composition and the abundance of species assemblages changes with depth and along a distance-from-shore gradient. The species assemblages on five offshore gas platforms in the southern North Sea have been inventoried using Remotely Operated Vehicles inspection footage. A total of 30 taxa were identified. A Generalised Additive Model of the species richness showed a significant non-linear relation with water depth (p = 0.001: from a low richness in shallow waters it increases with depth until 15-20 m, after which richness decreases again. Using PERMANOVA, water depth (p≤0.001, community age (p≤0.001 and the interaction between distance from shore and community age (p≤0.001 showed a significant effect on the species assemblages. Future research should focus on the effect additional environmental variables have on the species assemblages.

Marine Fouling Assemblages on Offshore Gas Platforms in the Southern North Sea: Effects of Depth and Distance from Shore on Biodiversity

Science.gov (United States)

van der Stap, Tim; Coolen, Joop W. P.; Lindeboom, Han J.

2016-01-01

Offshore platforms are known to act as artificial reefs, though there is on-going debate on whether this effect is beneficial or harmful for the life in the surrounding marine environment. Knowing what species exist on and around the offshore platforms and what environmental variables influence this species assemblage is crucial for a better understanding of the impact of offshore platforms on marine life. Information on this is limited for offshore platforms in the southern North Sea. This study aims to fill this gap in our knowledge and to determine how the composition and the abundance of species assemblages changes with depth and along a distance-from-shore gradient. The species assemblages on five offshore gas platforms in the southern North Sea have been inventoried using Remotely Operated Vehicles inspection footage. A total of 30 taxa were identified. A Generalised Additive Model of the species richness showed a significant non-linear relation with water depth (p = 0.001): from a low richness in shallow waters it increases with depth until 15–20 m, after which richness decreases again. Using PERMANOVA, water depth (p≤0.001), community age (p≤0.001) and the interaction between distance from shore and community age (p≤0.001) showed a significant effect on the species assemblages. Future research should focus on the effect additional environmental variables have on the species assemblages. PMID:26745870

The universal modular platform

International Nuclear Information System (INIS)

North, R.B.

1995-01-01

A new and patented design for offshore wellhead platforms has been developed to meet a 'fast track' requirement for increased offshore production, from field locations not yet identified. The new design uses modular construction to allow for radical changes in the water depth of the final location and assembly line efficiency in fabrication. By utilizing high strength steels and structural support from the well conductors the new design accommodates all planned production requirements on a support structure significantly lighter and less expensive than the conventional design it replaces. Twenty two platforms based on the new design were ready for installation within 18 months of the project start. Installation of the new platforms began in 1992 for drilling support and 1993 for production support. The new design has become the Company standard for all future production platforms. Large saving and construction costs have been realized through its light weight, flexibility in both positioning and water depth, and its modular construction

Dynamic performance of power generation systems for off-shore oil and gas platforms

DEFF Research Database (Denmark)

Pierobon, Leonardo; Breuhaus, Peter; Haglind, Fredrik

2014-01-01

%) arises on the prediction of the rotational speed of the high pressure shaft, while the largest deviation (average relative error ~20%) occurs in the evaluation of the pressure at the outlet of the low pressure turbine. As waste heat recovery units (e.g. organic Rankine cycles) are likely...... to be implemented in future off-shore platforms, the proposed model may serve in the design phase for a preliminary assessment of the dynamic response of the power generation system and to evaluate if requirements such as minimum and maximum frequency during transient operation and the recovery time are satisfied......On off-shore oil and gas platforms two or more gas turbines typically support the electrical demand on site by operating as a stand-alone (island) power system. As reliability and availability are major concerns during operation, the dynamic performance of the power generation system becomes...

Energy efficiency measures for offshore oil and gas platforms

International Nuclear Information System (INIS)

Nguyen, Tuong-Van; Voldsund, Mari; Breuhaus, Peter; Elmegaard, Brian

2016-01-01

Oil and gas platforms are energy-intensive systems – each facility uses from a few to several hundreds MW of energy, depending on the petroleum properties, export specifications and field lifetime. Several technologies for increasing the energy efficiency of these plants are investigated in this work. They include: (i) the installation of multiple pressure levels in production manifolds, (ii) the implementation of multiphase expanders, (iii) the promotion of energy and process integration, (iv) the limitation of gas recirculation around the compressors, (v) the exploitation of low-temperature heat from the gas cooling steps, (vi) the downsizing or replacement of the existing gas turbines, and (vii) the use of the waste heat from the power plant. The present study builds on four actual cases located in the North and Norwegian Seas, which differ by the type of oil processed, operating conditions and strategies. The benefits and practical limitations of each measure are discussed based on thermodynamic, economic and environmental factors. Significant energy savings and reductions in CO_2-emissions are depicted, reaching up to 15–20%. However, they strongly differ from one facility to another, which suggests that generic improvements can hardly be proposed, and that thorough techno-economic analyses should be conducted for each plant. - Highlights: • Energy efficiency measures for offshore platforms are assessed. • Energy savings and reductions in CO_2-emissions can reach up to 15-20%. • They differ strongly depending on the oil type, operating conditions and strategies.

Exergy destruction and losses on four North Sea offshore platforms: A comparative study of the oil and gas processing plants

DEFF Research Database (Denmark)

Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian

2014-01-01

The oil and gas processing plants of four North Sea offshore platforms are analysed and compared, based on the exergy analysis method. Sources of exergy destruction and losses are identified and the findings for the different platforms are compared. Different platforms have different working...... conditions, which implies that some platforms need less heat and power than others. Reservoir properties and composition vary over the lifetime of an oil field, and therefore maintaining a high efficiency of the processing plant is challenging. The results of the analysis show that 27%-57% of the exergy...... destruction take place in the gas treatment sections, 13%-29% take place in the gas recompression sections and 10%-24% occur in the production manifolds. The exergy losses with flared gas are significant for two of the platforms. The exact potential for energy savings and for enhancing system performances...

Decommissioning of offshore oil and gas installations

International Nuclear Information System (INIS)

Day, M.D.; Marks, M.H.

1997-01-01

A task facing the offshore oil and gas industry is the removal of about 7000 platforms. In this chapter, the legal framework for offshore platform decommissioning is first discussed. The various phases of abandonment are then described. The first and most critical of these is the planning phase which should be initiated years in advance when depletion plans for a field are recommended. Seven discrete activities are identified in the abandonment process itself and briefly discussed. These are: the permanent plugging and abandonment of non-productive well bores; pre-abandonment surveys and data gathering to gain knowledge about the platform and its condition; decommissioning; structure removal; disposal, recycle or reuse of platform components on or off shore; site clearance. (13 figures; 13 references) (UK)

H∞ memory feedback control with input limitation minimization for offshore jacket platform stabilization

Science.gov (United States)

Yang, Jia Sheng

2018-06-01

In this paper, we investigate a H∞ memory controller with input limitation minimization (HMCIM) for offshore jacket platforms stabilization. The main objective of this study is to reduce the control consumption as well as protect the actuator when satisfying the requirement of the system performance. First, we introduce a dynamic model of offshore platform with low order main modes based on mode reduction method in numerical analysis. Then, based on H∞ control theory and matrix inequality techniques, we develop a novel H∞ memory controller with input limitation. Furthermore, a non-convex optimization model to minimize input energy consumption is proposed. Since it is difficult to solve this non-convex optimization model by optimization algorithm, we use a relaxation method with matrix operations to transform this non-convex optimization model to be a convex optimization model. Thus, it could be solved by a standard convex optimization solver in MATLAB or CPLEX. Finally, several numerical examples are given to validate the proposed models and methods.

[Relationship of job stress with job burnout and quality of work life in workers for offshore oil platforms].

Science.gov (United States)

Zhang, Y; Liu, X L; Wei, T D; Lan, Y J

2017-03-20

Objective: To evaluate the current status of job burnout and qual ity of work life (QWL) in workers for offshore oil platforms, and to analyze the relationship of job stress with job burnout and QWL and the direct and indirect effects of job stress on QWL. Methods: Cluster random sampling was used to select 382 work-ers for 8 oil platforms of China National Offshore Oil Corporation in October 2015. A self - designed questionnaire was used to collect the individual characteristics of subjects. The Quality of Work Life Scale (QWL7 - 32) , Occupa-tional Stress Inventory - Revised Edition (OSI - R) , and Maslach Burnout Inventory - General Survey (MBI - GS) were used to investigate the QWL, job stress, and job burnout of subjects. Results: Among all the workers for offshore oil platforms, 87.2% had mild job burnout. The total QWL score was 116.01 ± 16.73; 8.3% of the workers had poor QWL, and 68.5% had moderate QWL. QWL was reduced with heavier task, vaguer task, and increasing mental stress and physical stress ( P stress had di-rect and indirect effects on QWL; stress reaction had the most effect on QWL (total effect size - 0.509) , followed by social support (total effect size 0.444) . Conclusion: Most workers for offshore oil platforms have mild job burn-out and moderate QWL. Job stress is associated with job burnout and QWL, and stress reaction and social support have relatively high influence on QWL.

Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms

International Nuclear Information System (INIS)

Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

Highlights: • Theory of power maximization used to design an air bottoming cycle. • Theory of power maximization extended by a multi-objective optimization method. • Three objective functions considered: net power output, recuperator volume and net present value. • Comparison between the theory of power maximization and the multi-objective optimization method. • Case study: a methodology applied to recover exhaust heat on off-shore platforms. - Abstract: This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi-objective optimization approach is employed to maximize the economic revenue, the compactness and the power production of the air bottoming cycle. The system compactness is assessed by introducing a detailed model of the shell and tube recuperator and including geometric quantities in the set of optimization variables. Findings indicate that using the power production, the volume of the recuperator and the net present value as objective functions the optimal pressure ratio (2.52) and the exhaust gas temperature (178.8 °C) differ from the values (2.80 and 145.5 °C) calculated using the theory of the power maximization. The highest net present value (2.8 M$) is found for a volume of the recuperator of 128 m 3 . Thus, it can be concluded that the multi-objective optimization approach enables extending the theory of power maximization bridging the gap between a mere optimization of the thermodynamic cycle and the practical feasibility of a power generation system

Atmospheric metallic and arsenic pollution at an offshore drilling platform in the Bo Sea: A health risk assessment for the workers.

Science.gov (United States)

Xu, Hong; Han, Suqin; Bi, Xiaohui; Zhao, Zhijing; Zhang, Lei; Yang, Wenjie; Zhang, Min; Chen, Jing; Wu, Jianhui; Zhang, Yufen; Feng, Yinchang

2016-03-05

To investigate the ambient metal pollution at the offshore drilling platform in the Bo Sea, which few studies have focused on, PM2.5 samples were collected and ten heavy metals, as well as As, were analyzed. High concentration levels of metals were observed, and the heavy metal pollution was quite serious compared to air quality standards and other marine areas. Back trajectories and wind dependent and PCA analyses showed that the marine sources included ship traffic emissions and corrosive stainless steels from the equipment at the platform as well as industrial emissions from stainless steel production and coal combustion sources, which were transported from the surrounding mainland. Both contributed greatly to the ambient metallic particles at the offshore platform. The Hazard Index values of the metals, which were much less than 1, the Carcinogenic Risk data, which were lower than the EPA's acceptable range, and the fact that the metal concentrations did not the exceed the permissible exposure limits of OSHA, indicated that the health risks from the ambient metallic particles for the oil-drilling workers were not significant. Copyright © 2015 Elsevier B.V. All rights reserved.

Dutch offshore suppliers in confident mood

International Nuclear Information System (INIS)

Beudel, M.

1998-01-01

A series of linked articles discusses the current state of the Netherland's offshore industry. Reduced taxes, and availability of exploration licenses has meant that explorers and producers are drawn to the small size, but frequent yield explorations on Holland's continental shelf. The excellent operation record of Rotterdam's Verolme Botlek yard; for repair and maintenance of offshore platforms and associated plant, is explored as the facility plans to diversify into newbuilding. The construction of an offshore basin designed for the hydrodynamic testing of offshore plant intended for deepwater use is described. The Netherlands maritime research institute (Marin) aims to stay at the forefront of offshore research and development with this new facility. Other articles cover pipe tensioning, new large linear winches and innovations in offshore drilling and production. (UK)

Emergency response in the Newfoundland offshore industry

Energy Technology Data Exchange (ETDEWEB)

Dempsey, J. [Cormorant Ltd., St. John' s, NL (Canada)

2006-07-01

This presentation reviewed current offshore oil activities with respect to safety issues regarding year-round marine operations in a harsh environment. Considerable logistics support is required for all offshore activities, including seismic and geotechnical surveys; exploration and production drilling; well testing; subsea construction; on-site production; and, delivery to market. Response to an offshore emergency must address the urgency of the incident along with stakeholder concerns. This presentation described the different types of emergencies and addressed issues regarding contingency planning; preventative measures; response philosophy; response scope; response at site; emergency management; communications links; and, oil spill response. The following current operations were highlighted: ExxonMobil's production drilling from the gravity-based concrete platform at Hibernia; Petro-Canada's production drilling at the Terra Nova FPSO; Husky Energy's production drilling at White Rose; and Chevron Canada's exploration drilling at the Orphan Basin. It was noted that in an emergency situation, the focus is on the welfare of offshore personnel. On an average day, the total offshore population is in the order of 1000 workers, all registered in the Personnel Logistics System which is updated with the departure of every helicopter from St. John's, Newfoundland or from the offshore platform. It is possible to prepare for foreseeable emergency incidents such as fire, explosion or gas leaks; spills to the marine environment; structural damage or collisions; persons lost at sea; helicopter or support vessel accidents; vessel sinking; sabotage; serious injuries or loss of life; severe ice events; and, loss of well control. The establishment of permanent safety zones at the Hibernia, White Rose and Terra Nova production fields are among the preventative measures, along with standby vessels that provide a rescue service for offshore installations

Emergency response in the Newfoundland offshore industry

International Nuclear Information System (INIS)

Dempsey, J.

2006-01-01

This presentation reviewed current offshore oil activities with respect to safety issues regarding year-round marine operations in a harsh environment. Considerable logistics support is required for all offshore activities, including seismic and geotechnical surveys; exploration and production drilling; well testing; subsea construction; on-site production; and, delivery to market. Response to an offshore emergency must address the urgency of the incident along with stakeholder concerns. This presentation described the different types of emergencies and addressed issues regarding contingency planning; preventative measures; response philosophy; response scope; response at site; emergency management; communications links; and, oil spill response. The following current operations were highlighted: ExxonMobil's production drilling from the gravity-based concrete platform at Hibernia; Petro-Canada's production drilling at the Terra Nova FPSO; Husky Energy's production drilling at White Rose; and Chevron Canada's exploration drilling at the Orphan Basin. It was noted that in an emergency situation, the focus is on the welfare of offshore personnel. On an average day, the total offshore population is in the order of 1000 workers, all registered in the Personnel Logistics System which is updated with the departure of every helicopter from St. John's, Newfoundland or from the offshore platform. It is possible to prepare for foreseeable emergency incidents such as fire, explosion or gas leaks; spills to the marine environment; structural damage or collisions; persons lost at sea; helicopter or support vessel accidents; vessel sinking; sabotage; serious injuries or loss of life; severe ice events; and, loss of well control. The establishment of permanent safety zones at the Hibernia, White Rose and Terra Nova production fields are among the preventative measures, along with standby vessels that provide a rescue service for offshore installations. Supply vessels are also

Bacterial diversity in water injection systems of Brazilian offshore oil platforms.

Science.gov (United States)

Korenblum, Elisa; Valoni, Erika; Penna, Mônica; Seldin, Lucy

2010-01-01

Biogenic souring and microbial-influenced corrosion is a common scenario in water-flooded petroleum reservoirs. Water injection systems are continuously treated to control bacterial contamination, but some bacteria that cause souring and corrosion can persist even after different treatments have been applied. Our aim was to increase our knowledge of the bacterial communities that persist in the water injection systems of three offshore oil platforms in Brazil. To achieve this goal, we used a culture-independent molecular approach (16S ribosomal RNA gene clone libraries) to analyze seawater samples that had been subjected to different treatments. Phylogenetic analyses revealed that the bacterial communities from the different platforms were taxonomically different. A predominance of bacterial clones affiliated with Gammaproteobacteria, mostly belonging to the genus Marinobacter (60.7%), were observed in the platform A samples. Clones from platform B were mainly related to the genera Colwellia (37.9%) and Achromobacter (24.6%), whereas clones obtained from platform C were all related to unclassified bacteria. Canonical correspondence analyses showed that different treatments such as chlorination, deoxygenation, and biocide addition did not significantly influence the bacterial diversity in the platforms studied. Our results demonstrated that the injection water used in secondary oil recovery procedures contained potentially hazardous bacteria, which may ultimately cause souring and corrosion.

Effects of offshore platforms on soft-bottom macro-benthic assemblages: a case study in a Mediterranean gas field.

Science.gov (United States)

Terlizzi, Antonio; Bevilacqua, Stanislao; Scuderi, Danilo; Fiorentino, Dario; Guarnieri, Giuseppe; Giangrande, Adriana; Licciano, Margherita; Felline, Serena; Fraschetti, Simonetta

2008-07-01

The exploitation of fossil fuels in the Mediterranean Sea will likely lead to an increase in the number of offshore platforms, a recognized threat for marine biodiversity. To date, in this basin, few attempts have been made to assess the impact of offshore gas and oil platforms on the biodiversity of benthic assemblages. Here, we adopted a structured experimental design coupled with high taxonomic resolution to outline putative effects of gas platforms on soft-bottom macrofauna assemblages in the North Ionian Sea. The analysis was based on a total of 20,295 specimens of 405 taxa, almost entirely identified at species level. Multivariate and univariate analyses showed idiosyncratic patterns of assemblage change with increasing distance from the platforms. Potential reasons underlying such inconsistency are analyzed and the view that structured experimental monitoring is a crucial tool to quantify the extent and magnitude of potential threats and to provide sound baseline information on biodiversity patterns is supported.

Product Platform Performance

DEFF Research Database (Denmark)

Munk, Lone

The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

Analysis of offshore platforms lifting with fixed pile structure type (fixed platform) based on ASD89

Science.gov (United States)

Sugianto, Agus; Indriani, Andi Marini

2017-11-01

Platform construction GTS (Gathering Testing Sattelite) is offshore construction platform with fix pile structure type/fixed platform functioning to support the mining of petroleum exploitation. After construction fabrication process platform was moved to barges, then shipped to the installation site. Moving process is generally done by pull or push based on construction design determined when planning. But at the time of lifting equipment/cranes available in the work area then the moving process can be done by lifting so that moving activity can be implemented more quickly of work. This analysis moving process of GTS platform in a different way that is generally done to GTS platform types by lifting using problem is construction reinforcement required, so the construction can be moved by lifting with analyzing and checking structure working stress that occurs due to construction moving process by lifting AISC code standard and analysis using the SAP2000 structure analysis program. The analysis result showed that existing condition cannot be moved by lifting because stress ratio is above maximum allowable value that is 0.950 (AISC-ASD89). Overstress occurs on the member 295 and 324 with stress ratio value 0.97 and 0.95 so that it is required structural reinforcement. Box plate aplication at both members so that it produces stress ratio values 0.78 at the member 295 and stress ratio of 0.77 at the member 324. These results indicate that the construction have qualified structural reinforcement for being moved by lifting.

Offshore platform sourced pollution monitoring using space-borne fully polarimetric C and X band synthetic aperture radar.

Science.gov (United States)

Singha, Suman; Ressel, Rudolf

2016-11-15

Use of polarimetric SAR data for offshore pollution monitoring is relatively new and shows great potential for operational offshore platform monitoring. This paper describes the development of an automated oil spill detection chain for operational purposes based on C-band (RADARSAT-2) and X-band (TerraSAR-X) fully polarimetric images, wherein we use polarimetric features to characterize oil spills and look-alikes. Numbers of near coincident TerraSAR-X and RADARSAT-2 images have been acquired over offshore platforms. Ten polarimetric feature parameters were extracted from different types of oil and 'look-alike' spots and divided into training and validation dataset. Extracted features were then used to develop a pixel based Artificial Neural Network classifier. Mutual information contents among extracted features were assessed and feature parameters were ranked according to their ability to discriminate between oil spill and look-alike spots. Polarimetric features such as Scattering Diversity, Surface Scattering Fraction and Span proved to be most suitable for operational services. Copyright © 2016 Elsevier Ltd. All rights reserved.

Determination and environmental estimation of NORMs in marine sediment environment of offshore platforms

International Nuclear Information System (INIS)

Vegueria, Sergio F. Jerez

2013-01-01

The natural radioactive materials (NORM known as) are found in the earth's crust, and during the process of production of oil and gas are concentrated in the produced water and the fouling (scale) pipes used for extraction. The production of oil and gas from produced water comes, comprising: forming water (water naturally present in the well ); injection water , usually sea water previously injected into the well to maintaining the pressure while the oil is removed; and water condensed in some cases of gas production. A high radioactivity of 226 Ra (natural grade of 238 U) and 228 Ra (from the natural series of 232 Th) is detected in produced water due to the high solubility of radio in formation water as uranium and thorium, which are insoluble in this medium, remain the rock matrix. The study was conducted in the area of offshore oil production in the state of Rio de January and included the determination of uranium, 226 Ra, 210 Pb and 228 Ra in marine sediment near the points of discharge of produced water from oil platforms. After the pre-treatment and digestion of samples, the determination of the natural uranium was performed on a mass spectrometer with inductively coupled plasma (ICP -MS). The activities of 226 Ra and 228 Ra were determined by high resolution gamma spectrometry through 214 Bi and 228 Ac , respectively. And in the case of 210 Pb, a correction was made for self-absorption employing an external source of this radionuclide. The results showed that there is no impact in sediments in the vicinity of the studied platforms

Cajun Maritime expands gas production platform with help from Liebherr crane

Energy Technology Data Exchange (ETDEWEB)

Anon.

2009-09-15

The South Marsh Island (SMI) Block 217 platform is a productive offshore natural gas handling hub in the Gulf of Mexico's Flatrock multiple reservoir deep-gas discovery. This one platform alone could increase natural gas production in the United States by 13 per cent. Louisiana-based Cajun Maritime LLC is the specialized marine subsidiary of the civil and mechanical contracting group Cajun Industries. The company focuses on maintaining a safe working environment at all times. The company purchased a new Liebherr LR 1300 lattice boom crawler crane for the Flatrock project because of its quality, lifting capacity and price. This article described the features of the crane that make it particularly suitable for offshore drilling, such as sealed bearings, big engine, high line pull, and the unique ability to move the main boom and luffing jib simultaneously while under load. The LR 1300 was used for several major installations, including pipelines, a new service crane and a water treatment deck platform. The safety features of the LR 1300 include a reeving winch which is used to install the lifting cables; the small diameter reeving winch cable is much easier to handle than the old method of hand pulling; and riggers are not required to walk the boom of the crane. The cab computer is useful in low overhead clearance work and completely removes the human error factor. The electronic hydraulic controls eliminate the risk of accidental load loss often associated with old-style friction cranes. 3 figs.

Thermo-economic assessment of the integration of steam cycles on offshore platforms

DEFF Research Database (Denmark)

Nguyen, Tuong-Van; Tock, Laurence; Breuhaus, Peter

2014-01-01

thermodynamic and economic performance indicators. The results illustrate the benefits of converting the gas turbines into a combined cycle. Using seawater results in smaller power generation and greater CO2-emissions than using process water, as the additional power generation in the combined cycle......The integration of steam bottoming cycles on oil platforms is often seen as a possible route to mitigate the CO2-emissions offshore. In this paper, a North Sea platform and its energy requirements are systematically analysed. The site-scale integration of steam networks is assessed by using...... is compensated by the significant pumping demand. This work emphasises that energy improvement efforts should be analysed at the scale of the overall site and not solely at the level of the combined cycle....

Design Loads on Platforms on Offshore wind Turbine Foundations with Respect to Vertical Wave Run-up

DEFF Research Database (Denmark)

Damsgaard, Mathilde L.; Gravesen, Helge; Andersen, Thomas Lykke

2007-01-01

reduction in the loads by up to 75%. Furthermore it is indicated, that the fact that offshore wind turbines often are placed on limited water depths thereby increasing the amount of (nearly) breaking waves, seems to increase the run-up height and thereby the pressures on the structure.......Experiences have shown that the vertical run-up generated by waves meeting the offshore wind turbine foundations, can result in rather vigorous loads on appurtenances and platform structures. This study aims to provide a qualitative method of determining run-up height and the following loads...

An Advanced Control Technique for Floating Offshore Wind Turbines Based on More Compact Barge Platforms

Directory of Open Access Journals (Sweden)

Joannes Olondriz

2018-05-01

Full Text Available Hydrodynamic Floating Offshore Wind Turbine (FOWT platform specifications are typically dominated by seaworthiness and maximum operating platform-pitch angle-related requirements. However, such specifications directly impact the challenge posed by an FOWT in terms of control design. The conventional FOWT systems are typically based on large, heavy floating platforms, which are less likely to suffer from the negative damping effect caused by the excessive coupling between blade-pitch control and platform-pitch motion. An advanced control technique is presented here to increase system stability for barge type platforms. Such a technique mitigates platform-pitch motions and improves the generator speed regulation, while maintaining blade-pitch activity and reducing blade and tower loads. The NREL’s 5MW + ITI Energy barge reference model is taken as a basis for this work. Furthermore, the capabilities of the proposed controller for performing with a more compact and less hydrodynamically stable barge platform is analysed, with encouraging results.

Platform decommissioning costs

International Nuclear Information System (INIS)

Rodger, David

1998-01-01

There are over 6500 platforms worldwide contributing to the offshore oil and gas production industry. In the North Sea there are around 500 platforms in place. There are many factors to be considered in planning for platform decommissioning and the evaluation of options for removal and disposal. The environmental impact, technical feasibility, safety and cost factors all have to be considered. This presentation considers what information is available about the overall decommissioning costs for the North Sea and the costs of different removal and disposal options for individual platforms. 2 figs., 1 tab

P-{Delta} effects on the reliability of oil offshore jacket platforms in Mexico

Energy Technology Data Exchange (ETDEWEB)

De Leon-Escobedo, D. [Universidad Autonoma del Estado de Mexico, Toluca, Estado de Mexico (Mexico)]. E-mail: daviddeleonescobedo@yahoo.com.mx; Campos, D. [Instituto Mexicano del Petroleo (Mexico)]. E-mail: dcampos@imp.mx

2012-07-15

Given the important economic consequences of an oil platform failure, all the aspects of its structural behavior and safety issues need to be carefully considered. In particular, P-{Delta} effects on the deck legs of marine offshore jacket platforms may be relevant when the deck height and the vertical load are significant. In this paper, the impact of the moment amplification, due to slenderness of the deck legs, on the platform safety is examined and appraised from the viewpoint of the structural reliability. The formulation is applied to a typical tall deck marine platform under the environmental loading at the Bay of Campeche, Mexico, and its reliability index is calculated with and without the P-{Delta} effect. The results presented herein may be used to improve the current practice in the design and assessment of offshore marine platforms in Mexico and to update the current version of the code. [Spanish] Dadas las importantes consecuencias economicas de la falla de una plataforma petrolera, todos los aspectos de su comportamiento estructural y aspectos de seguridad necesitan considerarse cuidadosamente. En particular, los efectos P-{Delta} en las piernas de la cubierta de plataformas marinas costa fuera petroleras tipo jacket pueden ser relevantes cuando la altura de la cubierta y la intensidad de cargas verticales son significativas. En este articulo se examina el impacto que sobre la seguridad de la plataforma tiene la amplificacion de momentos, debido a la esbeltez de las piernas de la cubierta, y se evalua este impacto desde el punto de vista de confiabilidad estructural. La formulacion se aplica a una plataforma marina tipica, con cubierta alta, bajo la carga ambiental de la Bahia de Campeche, Mexico y se calcula su indice de confiabilidad con y sin el efecto P-{Delta}. Los resultados presentados aqui pueden usarse para mejorar las practicas actuales de diseno y evaluacion de plataformas marinas costa fuera en Mexico y para actualizar la version actual

Product Platform Modeling

DEFF Research Database (Denmark)

Pedersen, Rasmus

for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

Architecture and growth history of a Miocene carbonate platform from 3D seismic reflection data; Luconia province, offshore Sarawak, Malaysia

NARCIS (Netherlands)

Zampetti, V.; Schlager, W.; van Konijnenburg, J.H; Everts, A.J.

2004-01-01

Using 3D seismic reflection data and wireline logs we reconstruct in detail the architecture and growth history of a Miocene carbonate platform in the Luconia province, offshore Sarawak, Malaysia. Platform growth started in the Late Oligocene to Early Miocene, by coalescence of isolated patch reefs.

Optimisation of electrical system for offshore wind farms via genetic algorithm

DEFF Research Database (Denmark)

Chen, Zhe; Zhao, Menghua; Blaabjerg, Frede

2009-01-01

An optimisation platform based on genetic algorithm (GA) is presented, where the main components of a wind farm and key technical specifications are used as input parameters and the electrical system design of the wind farm is optimised in terms of both production cost and system reliability....... The power losses, wind power production, initial investment and maintenance costs are considered in the production cost. The availability of components and network redundancy are included in the reliability evaluation. The method of coding an electrical system to a binary string, which is processed by GA......, is developed. Different GA techniques are investigated based on a real example offshore wind farm. This optimisation platform has been demonstrated as a powerful tool for offshore wind farm design and evaluation....

Sublethal detoxification responses to contaminant exposure associated with offshore production platforms

Energy Technology Data Exchange (ETDEWEB)

McDonald, S. J.; Willett, K. L.; Thomsen, J.; Beatty, K. B.; Connor, K.; Narasimhan, T. R.; Erickson, C. M.; Safe, S. H. [Texas A and M Univ., College Station, TX (United States)

1996-11-01

Several fish and invertebrate species were evaluated for their responses to contamination associated with petroleum and gas development and production in the Gulf of Mexico. Sampling was done at 100 and 3000 m from the center of three platforms. No significant near/far station differences were observed in aryl hydrocarbon hydroxylase (AHH) activity for invertebrate species. Similarly, no AHH activity, or cytochrome P450 mRNA levels, or biliary polynuclear aromatic hydrocarbon (PAH) metabolite concentrations were detected in 16 fish species. There were, however, some species-specific differences in AHH and biliary PAH metabolite levels. 78 refs., 3 tabs., 7 figs.

How Offshoring Elicits Reconfiguration of the Service Production System

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

Service production systems can be seen as a structure consisting of task execution, resources executing tasks and the service output received by the client. Offshoring acts as an exogenous shock to such a service production system. Drawing on practice theory and applying a multiple case methodology...... of the impact of offshoring and to practice theory....

Computational Fluid Dynamic Analysis of a Floating Offshore Wind Turbine Experiencing Platform Pitching Motion

Directory of Open Access Journals (Sweden)

Thanhtoan Tran

2014-08-01

Full Text Available The objective of this study is to illustrate the unsteady aerodynamic effects of a floating offshore wind turbine experiencing the prescribed pitching motion of a supporting floating platform as a sine function. The three-dimensional, unsteady Reynolds Averaged Navier-Stokes equations with the shear-stress transport (SST k-ω turbulence model were applied. Moreover, an overset grid approach was used to model the rigid body motion of a wind turbine blade. The current simulation results are compared to various approaches from previous studies. The unsteady aerodynamic loads of the blade were demonstrated to change drastically with respect to the frequency and amplitude of platform motion.

Gravitational and submersible offshore platform, and construction method. Nedsenkbar fralandsplattform av gravitasjonstypen og fremgangsmaate for fremstilling av samme

Energy Technology Data Exchange (ETDEWEB)

Berge, T.; Olsen, O.

1985-06-17

The invention concerns a submersible offshore platform of the gravitational type designed for great depths. The platform is made of concrete or the like comprising a sea-bed foundation, and a number of at least 3 cantilevered pillars connected to the prop section carrying the load-bearing structure and the platform deck. In addition, the platform consists of a cellular floating section, and the central part of it is lengthened upwards. The central column supports the prop section. There is a considerable space between the floating section and the bed foundation. The various steps of the construction methods are presented. 11 drawings.

Platform-based production development

DEFF Research Database (Denmark)

Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

2015-01-01

Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

Toe-of-slope of a Cretaceous carbonate platform in outcrop, seismic model and offshore seismic data (Apulia, Italy)

Science.gov (United States)

Bracco Gartner, Guido; Morsilli, Michele; Schlager, Wolfgang; Bosellini, Alfonso

Synthetic seismic models of outcrops in the Early Cretaceous slope of a carbonate platform on the Gargano Promontory (southern Italy) were compared to an offshore seismic section south of the Promontory. Outcrops of the same age on the promontory have the same sequence stratigraphic characteristics as their offshore equivalent, and are the only areas where the transition from platform to basin of Early Cretaceous is exposed on land. Two adjacent outcrop areas were combined into one seismic-scale lithologic model with the aid of photo mosaics, measured sections, and biostratigraphic data. Velocity, density, and porosity measurements on spot samples were used to construct the impedance model. Seismic models were generated by vertical incidence and finite difference programs. The results indicate that the reflections in the seismic model are controlled by the impedance contrast between low porous intervals rich in debris from the platform and highly porous intervals of pelagic lime mudstone, nearly devoid of debris. Finite difference seismic display showed best resemblance with the real seismic data, especially by mapping a drowning unconformity.

Offshore Energy Mapping for Northeast Atlantic and Mediterranean: MARINA PLATFORM project

Science.gov (United States)

Kallos, G.; Galanis, G.; Spyrou, C.; Kalogeri, C.; Adam, A.; Athanasiadis, P.

2012-04-01

Deep offshore ocean energy mapping requires detailed modeling of the wind, wave, tidal and ocean circulation estimations. It requires also detailed mapping of the associated extremes. An important issue in such work is the co-generation of energy (generation of wind, wave, tides, currents) in order to design platforms on an efficient way. For example wind and wave fields exhibit significant phase differences and therefore the produced energy from both sources together requires special analysis. The other two sources namely tides and currents have different temporal scales from the previous two. Another important issue is related to the estimation of the environmental frequencies in order to avoid structural problems. These are issues studied at the framework of the FP7 project MARINA PLATFORM. The main objective of the project is to develop deep water structures that can exploit the energy from wind, wave, tidal and ocean current energy sources. In particular, a primary goal will be the establishment of a set of equitable and transparent criteria for the evaluation of multi-purpose platforms for marine renewable energy. Using these criteria, a novel system set of design and optimisation tools will be produced addressing new platform design, component engineering, risk assessment, spatial planning, platform-related grid connection concepts, all focussed on system integration and reducing costs. The University of Athens group is in charge for estimation and mapping of wind, wave, tidal and ocean current resources, estimate available energy potential, map extreme event characteristics and provide any additional environmental parameter required.

The Reconfiguration of Service Production Systems in Response to Offshoring

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

2017-01-01

Purpose: A service production system has a structure composed of task execution, agents performing tasks and a resulting service output. The purpose of this paper is to understand how such a service production system changes as a consequence of offshoring.Design/methodology/approach: Drawing...... of a service production system in response to change ignited by offshoring. The authors find recurring effects between structures that enable and constrain agents and agents who shape the structure of the production system. Research limitations/implications: The paper offers a novel contribution to the service...... operations management literature by applying practice theory. Moreover, the authors propose a detailed, activity-driven view of service production systems and service offshoring. The authors contribute to practice theory by extending its domain to operations management.Practical implications...

Oil exploration and production offshore Sakhalin Island

Energy Technology Data Exchange (ETDEWEB)

Reed, I.C. [Sakhalin Energy Investment Company, Yuzhno-Sakhalinsk (Russian Federation)

2006-11-15

The offshore oil and gas exploration that is currently taking place on Sakhalin Island was discussed, with particular reference to the status of Sakhalin Energy and the challenges facing oil and exportation from the ice covered waters of Russia's Sea of Okhotsk. Sakhalin Energy, an incorporated joint venture of a consortium of companies, completed a feasibility study for oil production off the east coast of Sakhalin Island in December 1992. Sakhalin Energy has two fields, namely the Piltun Astokhskoye and Lunskoye fields. The Piltun Astokhskoye field is currently under production via the Molikpaq platform and the Lunskoye field and northern part of Piltun Astokhskoye field are currently being developed under the Phase 2 project. Since 1999, Sakhalin Energy has been producing oil from a caisson structure drilling rig which was fitted with ice protection shielding around the waterline in order to comply with Russian requirements. Production is via an undersea pipeline to a Single Anchor Leg Mooring (SALM) unit and then to a Floating Storage and Offloading unit (FSO). A brief outline of the structure was presented along with current ice management procedures and arrangements. In order to maximize the length of the production season, ice management is used to enable an early start and a late end to production. It was noted that great care is taken to ensure that the operations in ice are carried out with consideration of the environmentally sensitive area that is home to the endangered Western Gray Whale and Stellar Sea Eagle. 3 refs., 1 tab., 7 figs.

Pig lift applications in offshore dry completion wells; Aplicacao do pig lift em pocos offshore de completacao seca

Energy Technology Data Exchange (ETDEWEB)

Lima, Paulo C.R.; Faria, Rogerio Costa; Almeida, Alcino Resende [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2000-07-01

Production increases of 10% to 130% have been obtained with pig lift installations on offshore oil wells in the Cacao Field, southeast Brazil. At the present time 3 wells out of 5 are being produced with pig lift. These deep, highly deviated wells with little space on the platform to the required surface equipment presented a challenge to pig lift technology. However, these difficulties were overcame and the benefits obtained helped to maintain the economical attractiveness of the platform. (author)

Damage to offshore infrastructure in the Gulf of Mexico by hurricanes Katrina and Rita

Science.gov (United States)

Cruz, A. M.; Krausmann, E.

2009-04-01

The damage inflicted by hurricanes Katrina and Rita to the Gulf-of-Mexico's (GoM) oil and gas production, both onshore and offshore, has shown the proneness of industry to Natech accidents (natural hazard-triggered hazardous-materials releases). In order to contribute towards a better understanding of Natech events, we assessed the damage to and hazardous-materials releases from offshore oil and natural-gas platforms and pipelines induced by hurricanes Katrina and Rita. Data was obtained through a review of published literature and interviews with government officials and industry representatives from the affected region. We also reviewed over 60,000 records of reported hazardous-materials releases from the National Response Center's (NRC) database to identify and analyze the hazardous-materials releases directly attributed to offshore oil and gas platforms and pipelines affected by the two hurricanes. Our results show that hurricanes Katrina and Rita destroyed at least 113 platforms, and severely damaged at least 53 others. Sixty percent of the facilities destroyed were built 30 years ago or more prior to the adoption of the more stringent design standards that went into effect after 1977. The storms also destroyed 5 drilling rigs and severely damaged 19 mobile offshore drilling units (MODUs). Some 19 MODUs lost their moorings and became adrift during the storms which not only posed a danger to existing facilities but the dragging anchors also damaged pipelines and other infrastructure. Structural damage to platforms included toppling of sections, and tilting or leaning of platforms. Possible causes for failure of structural and non-structural components of platforms included loading caused by wave inundation of the deck. Failure of rigs attached to platforms was also observed resulting in significant damage to the platform or adjacent infrastructure, as well as damage to equipment, living quarters and helipads. The failures are attributable to tie-down components

PROVANN: Model System for Chronic Exposure of Larval and Adult Fish to Releases from Offshore Petroleum Platforms

International Nuclear Information System (INIS)

Reed, M.; Rye, H.; Melbye, A.; Johnsen, S.

1996-01-01

Produced water from offshore oil and gas production platforms contains a variety of hydrocarbons, heavy metals, and production chemicals. Vertical and horizontal mixing generally brings concentrations in discharge plumes below level associated with acute effects within 500 or 1000 m of the source. Chronic effects outside this region remain a potential problem. The purpose of PROVANN, the system of models described in this paper, is to assess the potential for chronic effects from produced water. The preliminary focus is on potential bioaccumulation and boimagnification of produced water constituents in the marine food web. Other possible types of chronic effects, such as reduced fecundity, or pheromone response interference, can also be assessed to the extent that such effects may be correlated with exposure. PROVANN simulates 3-dimensional transport, dilution, and degradation of chemicals released into the water, from one or more simultaneous sources. 8 refs., 10 figs., 3 tabs

Gela offshore field

Energy Technology Data Exchange (ETDEWEB)

Pagliughi, G

1965-06-01

The field of Gela, off the southern shore of Sicily, is the only producing offshore field in the Mediterranean. It produces from Triassic dolimite limestones of 434-m thickness, water level at -3517 m. It is a water-drive reservoir producing 10/sup 0/F API oil and has 79 wells, some of them on shore. Most offshore wells are directional wells from shore; there are also 2 fixed platforms and a special mobile platform. The wells are on pump (stroke, 72 in.; capacity 200 tons per day). The crude goes directly to a combination refinery-petrochemical complex at Gela.

Spar-type platform design for the offshore floating nuclear power plant

International Nuclear Information System (INIS)

Jurewicz, Jacob; Buongiorno, Jacopo; Todreas, Neil; Golay, Michael

2014-01-01

There exists the potential for substantial gains in safety, physical security, and economics for nuclear electricity supply through the development of an Offshore Floating Nuclear Plant (OFNP). Utilizing the most reliable and efficient construction techniques, this plant can be built from modular components in a shipyard as a partially submerged floating spar platform. The plant can then be floated to a site between 5 and 10 miles off the coast, moored in approximately 100-meter deep water, and connected to the grid via an underwater transmission line. The OFNP is designed to take full advantage of its environment to include passive cooling systems that eliminate the loss of ultimate heat sink accident, thereby decreasing the likelihood of severe accidents. The platform’s structural design, mooring system, and siting protect it against severe weather systems and render it immune to tsunamis and seismic activity. Furthermore, the OFNP containment design and venting procedures effectively eliminate the threat of serious land contamination, should a severe accident actually occur. The OFNP overall design builds on decades of offshore oil drilling experience and is derived from a shortened cylindrical spar platform. The platform has a skirt diameter of 75 m, a waterline diameter of 45 m, an operational draft of 48.5 m, and a total weight of about 38,200 tons when the skirt is empty. The spar design maximizes hydrodynamic stability, has been tested in various locations around the world in oil extraction, and offers significant protection to critical systems from external threats. The reactor containment is located below sea level and centered in a hull surrounded by seawater. This positioning offers both considerable physical security as well as unique opportunities in passive cooling. Watertight levels house safety critical systems (e.g. reactor, spent fuel pool, control room, battery room), the steam cycle, the condensate storage tank, and the desalination plant

Efficient promotion of electricity production from offshore wind; Effiziente Foerderung der Stromerzeugung aus Offshore-Wind

Energy Technology Data Exchange (ETDEWEB)

Panzer, Christian; Auer, Hans; Lettner, Georg [Technische Univ. Wien (Austria). Energy Economics Group (EEG)

2014-03-15

Efficient promotion of electricity production from offshore wind stands in dynamic relationship with various influence factors, the most important of which are promotion instruments, topographic givens, regulation of grid connection, and supraregional market integration concepts. Using three case studies from different countries to highlight national differences in the promotion of offshore wind power plants the present analysis points out ways of improving the efficiency of promotion instruments.

Efficient promotion of electricity production from offshore wind

International Nuclear Information System (INIS)

Panzer, Christian; Auer, Hans; Lettner, Georg

2014-01-01

Efficient promotion of electricity production from offshore wind stands in dynamic relationship with various influence factors, the most important of which are promotion instruments, topographic givens, regulation of grid connection, and supraregional market integration concepts. Using three case studies from different countries to highlight national differences in the promotion of offshore wind power plants the present analysis points out ways of improving the efficiency of promotion instruments.

Rarefaction Shock Wave Cutter for Offshore Oil-Gas Platform Removal Final Report CRADA No. TC02009.0

Energy Technology Data Exchange (ETDEWEB)

Glenn, L. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Barker, J. [Halliburton Energy Services, Alvarado, TX (United States)

2017-09-06

This was a collaborative effort between Lawrence Livermore National Security, LLC/Lawrence Livermore National Laboratory (LLNL) (formerly the University of California) and Jet Research Center, a wholly owned division of Halliburton Energy Services, Inc. to design and prototype an improved explosive cutter for cutting the support legs of offshore oil and gas platforms.

Biomarkers in natural fish populations indicate adverse biological effects of offshore oil production.

Directory of Open Access Journals (Sweden)

Lennart Balk

Full Text Available Despite the growing awareness of the necessity of a sustainable development, the global economy continues to depend largely on the consumption of non-renewable energy resources. One such energy resource is fossil oil extracted from the seabed at offshore oil platforms. This type of oil production causes continuous environmental pollution from drilling waste, discharge of large amounts of produced water, and accidental spills.Samples from natural populations of haddock (Melanogrammus aeglefinus and Atlantic cod (Gadus morhua in two North Sea areas with extensive oil production were investigated. Exposure to and uptake of polycyclic aromatic hydrocarbons (PAHs were demonstrated, and biomarker analyses revealed adverse biological effects, including induction of biotransformation enzymes, oxidative stress, altered fatty acid composition, and genotoxicity. Genotoxicity was reflected by a hepatic DNA adduct pattern typical for exposure to a mixture of PAHs. Control material was collected from a North Sea area without oil production and from remote Icelandic waters. The difference between the two control areas indicates significant background pollution in the North Sea.It is most remarkable to obtain biomarker responses in natural fish populations in the open sea that are similar to the biomarker responses in fish from highly polluted areas close to a point source. Risk assessment of various threats to the marine fish populations in the North Sea, such as overfishing, global warming, and eutrophication, should also take into account the ecologically relevant impact of offshore oil production.

Comparison of Simulations and Offshore Measurement Data of a Combined Floating Wind and Wave Energy Demonstration Platform

DEFF Research Database (Denmark)

Yde, Anders; Larsen, Torben J.; Hansen, Anders Melchior

2015-01-01

In this paper, results from comparisons of simulations and measured offshore data from a floating combined wind and wave energy conversion system are presented. The numerical model of the platform is based on the aeroelastic code, HAWC2, developed by DTU Wind Energy, which is coupled with a special...... external system that reads the output generated directly by the wave analysis software WAMIT. The main focus of the comparison is on the statistical trends of the platform motion, mooring loads, and turbine loads in measurements and simulations during different operational conditions. Finally, challenges...

Waste heat recovery for offshore applications

DEFF Research Database (Denmark)

Pierobon, Leonardo; Kandepu, Rambabu; Haglind, Fredrik

2012-01-01

vary in the range 20-30%. There are several technologies available for onshore gas turbines (and low/medium heat sources) to convert the waste heat into electricity. For offshore applications it is not economical and practical to have a steam bottoming cycle to increase the efficiency of electricity...... production, due to low gas turbine outlet temperature, space and weight restrictions and the need for make-up water. A more promising option for use offshore is organic Rankine cycles (ORC). Moreover, several oil and gas platforms are equipped with waste heat recovery units to recover a part of the thermal...... energy in the gas turbine off-gas using heat exchangers, and the recovered thermal energy acts as heat source for some of the heat loads on the platform. The amount of the recovered thermal energy depends on the heat loads and thus the full potential of waste heat recovery units may not be utilized...

Study of environmental concerns: offshore oil and gas drilling and production

Energy Technology Data Exchange (ETDEWEB)

Baker, R

1978-01-01

Material on the environmental concerns associated with offshore drilling and production activities has been synthesized with Department of Fisheries and Environment files on specific projects, these being the primary information source. Recommendations to resolve these concerns have also been provided. Most of the environmental concerns identified in this study are traceable to specific weaknesses in offshore drilling and production procedures and management systems. Hardware weaknesses are seldom of central importance. Areas of concern include the gradual deposition of pollutants from rigs, underwater pipelines and onshore ancillary structures, and the quality of the following: action plans to deal with oil spills, standards for safety and anti-pollution equipment, information provided on the environmental hazards in offshore drilling and production areas, environmental impact assessments, and communication links between those having environmental concerns and expertise (including the public-at-large) and those who make the decisions regarding offshore oil and gas development.

Preparing for a Product Platform

DEFF Research Database (Denmark)

Fiil-Nielsen, Ole; Munk, Lone; Mortensen, Niels Henrik

2005-01-01

on commonalities and similarities in the product family, and variance should be based on customer demands. To relate these terms and to improve the basis on which decisions are made, we need a way of visualizing the hierarchy of the product family as well as the commonality and variance. This visualization method...... of the platform or ensuring that the platform can meet future demands will be very useful in the preparation process of a platform synthesis as well as in the updating or reengineering of an existing product development platform.......Experience in the industry as well as recent related scientific publications show the benefits of product development platforms. Companies use platforms to develop not a single but multiple products (i.e. a product family) simultaneously. When these product development projects are coordinated...

Seabird data collected by the Grand Banks offshore hydrocarbon industry 1999-2002 : results, limitations and suggestions for improvement

International Nuclear Information System (INIS)

Baillie, S.M.; Robertson, G.J.; Wiese, F.K.

2005-01-01

Offshore oil operations attract and concentrate migratory seabirds through an artificially enhanced food supply and lights. In order to understand the vulnerability of seabirds near offshore oil facilities, the degree of association of seabirds with these sites must be determined. Offshore oil and gas exploration on Newfoundland's Grand Banks began in the early 1980s, with first oil produced in 1997 at the Hibernia fixed platform. Additional production followed in 2002 from the Terra Nova Floating Production Storage and Offloading Vessel. As the Grand Banks oil industry grows, seismic surveys continue to be conducted and an estimated 30,000 litres of crude oil and synthetic based drilling fluids have been spilled from exploration drilling, development drilling and production oil operations between 1997 and 2002. Most of the spills occurred in winter when the number of seabirds on the Grand Banks are highest and most vulnerable to oil pollution. This report presents an evaluation of the current Grand Banks offshore oil and gas development seabird monitoring programs. It focuses mostly on seabird monitoring on fixed platforms. The objective was to assess the scientific quality of seabird-related industry programs by compiling and summarizing all available spatial and temporal seabird abundance data and deck stranded birds associated with Grand Banks offshore oil platforms from 1997 to 2002. Data on seabird distributions at sea and stranded bird encounters was collected from 8 offshore hydrocarbon sites on the northeastern Grand Banks. It was recommended that a standardized seabird monitoring and observer training program for the offshore operations in the Grand Banks region be implemented. 43 refs., 5 tabs., 16 figs., 3 appendices

Offshore concrete structures; Estructuras Offshore (mar adentro) de Hormigon

Energy Technology Data Exchange (ETDEWEB)

Lamas Pardo, M.; Carral Couce, L. M.

2011-07-01

In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shipbuilding industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

Determination and environmental estimation of NORMs in marine sediment environment of offshore platforms; Determinacao e avaliacao ambiental de NORMs em sedimento marinho entorno de plataformas offshore

Energy Technology Data Exchange (ETDEWEB)

Vegueria, Sergio F. Jerez, E-mail: sfjerez@vm.uff.br [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Departamento de Quimica Analitica; Godoy, Jose M., E-mail: rccampos@puc-rio.br, E-mail: jmgodoy@puc-rio.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2013-07-01

The natural radioactive materials (NORM known as) are found in the earth's crust, and during the process of production of oil and gas are concentrated in the produced water and the fouling (scale) pipes used for extraction. The production of oil and gas from produced water comes, comprising: forming water (water naturally present in the well ); injection water , usually sea water previously injected into the well to maintaining the pressure while the oil is removed; and water condensed in some cases of gas production. A high radioactivity of {sup 226}Ra (natural grade of {sup 238}U) and {sup 228}Ra (from the natural series of {sup 232}Th) is detected in produced water due to the high solubility of radio in formation water as uranium and thorium, which are insoluble in this medium, remain the rock matrix. The study was conducted in the area of offshore oil production in the state of Rio de January and included the determination of uranium, {sup 226}Ra, {sup 210}Pb and {sup 228}Ra in marine sediment near the points of discharge of produced water from oil platforms. After the pre-treatment and digestion of samples, the determination of the natural uranium was performed on a mass spectrometer with inductively coupled plasma (ICP -MS). The activities of {sup 226}Ra and {sup 228}Ra were determined by high resolution gamma spectrometry through {sup 214}Bi and {sup 228}Ac , respectively. And in the case of {sup 210}Pb, a correction was made for self-absorption employing an external source of this radionuclide. The results showed that there is no impact in sediments in the vicinity of the studied platforms.

Federal Offshore Statistics, 1993. Leasing, exploration, production, and revenue as of December 31, 1993

Energy Technology Data Exchange (ETDEWEB)

Francois, D.K.

1994-12-31

This document contains statistical data on the following: federal offshore lands; offshore leasing activity and status; offshore development activity; offshore production of crude oil and natural gas; federal offshore oil and natural gas sales volume and royalties; revenue from federal offshore leases; disbursement of federal offshore revenue; reserves and resource estimates of offshore oil and natural gas; oil pollution in US and international waters; and international activities and marine minerals. A glossary is included.

International Production and Global Logistics Operations : Management Issues in Global Logistics with Offshored Production Systems

OpenAIRE

Korrmann, Franziska

2011-01-01

This paper is directed at discussing some of the management issues, problems and solutions of logistics in the context of offshored productive activities The introduction includes a discussion of the logistics topics and an introduction of the economic logic of offshoring. The main part analyses the logistics topics with regard to the internationally fragmented production. The topics of logistics include: Information flow and integration, transportation, inventory management, warehousing and ...

Review of technology for Arctic offshore oil and gas recovery

Energy Technology Data Exchange (ETDEWEB)

Sackinger, W. M.

1980-08-01

The technical background briefing report is the first step in the preparation of a plan for engineering research oriented toward Arctic offshore oil and gas recovery. A five-year leasing schedule for the ice-prone waters of the Arctic offshore is presented, which also shows the projected dates of the lease sale for each area. The estimated peak production rates for these areas are given. There is considerable uncertainty for all these production estimates, since no exploratory drilling has yet taken place. A flow chart is presented which relates the special Arctic factors, such as ice and permafrost, to the normal petroleum production sequence. Some highlights from the chart and from the technical review are: (1) in many Arctic offshore locations the movement of sea ice causes major lateral forces on offshore structures, which are much greater than wave forces; (2) spray ice buildup on structures, ships and aircraft will be considerable, and must be prevented or accommodated with special designs; (3) the time available for summer exploratory drilling, and for deployment of permanent production structures, is limited by the return of the pack ice. This time may be extended by ice-breaking vessels in some cases; (4) during production, icebreaking workboats will service the offshore platforms in most areas throughout the year; (5) transportation of petroleum by icebreaking tankers from offshore tanker loading points is a highly probable situation, except in the Alaskan Beaufort; and (6) Arctic pipelines must contend with permafrost, making instrumentation necessary to detect subtle changes of the pipe before rupture occurs.

Offshore concrete structures

International Nuclear Information System (INIS)

Lamas Pardo, M.; Carral Couce, L. M.

2011-01-01

In the offshore industry there are two possible materials for the construction of the hull of a structure; the steel and concrete, with the first one widely used until now, as in the rest of the shiphuidling industry of merchant ships, warships, etc. Materials such as aluminum, GRP or timber areused in small units with lengths lower than 100 m, and in less adverse conditions than in the offshore industry. Nevertheless, some ships/barges have been built of concrete in the past, but have been rather isolated cases which have not changed the practice in the industry. In the First and Second World War were built by the scarcity of materials, while the series of barges by Alfred A. Yee was a rare exception. Other units were also made in concrete, but almost anecdotal. Still, the behaviour of these concrete structures, especially in terms of maintenance, has been excellent. Therefore, the fact that the concrete has not had an adequate reception so far in shipbuilding, does not mean that in will not be the material best suited for the offshore industry in the future. The extra displacement and associated fuel costs in concrete ships have been found prohibitive in the past. But the loss of mobility of a concrete hull in relation to a steel hull can be perfectly offset by the advantages offered by the concrete, as the shipping and offshore industry have very different priorities. One of the main differences in these priorities is in terms of maintenance and resistance to fatigue, precisely where the concrete performs better. ships can easily be dry docked for maintenance and repair, while in the offshore platforms these works have to be done in situ so maintenance and fatigue are crucial to them. Besides these, the concrete has other advantages according to findings of several studies. And although they are interested in the conclusions that the makes as they came from people in the concrete industry, the fact that in recent years concrete offshore unit shave been built

Offshoring as an Exogenous Shock to the Services Production System

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael; Petersen, Bent

Production of services involves three key elements, an output for the client, resources of a provider and task execution. Offshoring of services acts as an exogenous shock to such a production system. Using multiple case methodology we investigate how task output, execution, and resources change...... as a consequence of offshoring and particularly how these elements are realigned. The cases reveal substantial managerial challenges in the alignment process prompted by a relocation of service task execution to an emerging economy. In particular, we find that instead of some set of capabilities that proactively...

EU-NORSEWInD - Investigation of Flow Distoration Effects on Offshore Instrumentation

DEFF Research Database (Denmark)

Stickland, Matt; Scanlon, Tom; Fabre, Sylvie

of which is the availability of good quality data to facilitate better project planning, accurate yield prediction, and a fundamentally better understanding of the working environment and local climatology. To address this issue the common convention is to mount instrumentation in offshore locations...... to assess the local wind conditions. Part of the overall NORSEWInD project is the use of LiDAR remote sensing (RS) systems mounted on offshore platforms to measure wind velocity profiles at a number of locations offshore. The data acquired from the offshore RS measurements will be fed into a large and novel....... It was obvious that the airflow data measured above the mounting platforms would be distorted by the presence of the platform. However; the extent to which the flow field above the various mounting platforms would be distorted was unknown. Therefore, part of the fundamental research incorporated...

Reverse logistic applied to offshore operations; A logistica reversa aplicada as operacoes offshore

Energy Technology Data Exchange (ETDEWEB)

Castro Neto, Jorge Raimundo de Almeida [Universidade Salvador (UNIFACS), BA (Brazil)

2010-07-01

Mass production development has brought as consequence the necessity of more complexes distributions ways to come to multiple final consumers a big products quantity. Additionally, these same products has support necessities as well, substitution or product residue during or on the end of yours life. From the initial necessity, have the logistic concept and from the additional necessity, have the reverse logistic concept. Oil offshore operations are applying the reverse logistic concept through the residues returning by support vessels that attends Oil platforms and workers through helicopters to work turns. However, the relative cost to this residue destination is lower in comparative to the operation total costs, decreasing the interest by remanufacture and reapplication during planning stage. Adding to this reason, the fact that this kind of operation occurs during a shorts time periods. (author)

The Feasibility of Wind and Solar Energy Application for Oil and Gas Offshore Platform

International Nuclear Information System (INIS)

Tiong, Y K; Zahari, M A; Wong, S F; Dol, S S

2015-01-01

Renewable energy is an energy which is freely available in nature such as winds and solar energy. It plays a critical role in greening the energy sector as these sources of energy produce little or no pollution to environment. This paper will focus on capability of renewable energy (wind and solar) in generating power for offshore application. Data of wind speeds and solar irradiation that are available around SHELL Sabah Water Platform for every 10 minutes, 24 hours a day, for a period of one year are provided by SHELL Sarawak Sdn. Bhd. The suitable wind turbine and photovoltaic panel that are able to give a high output and higher reliability during operation period are selected by using the tabulated data. The highest power output generated using single wind energy application is equal to 492 kW while for solar energy application is equal to 20 kW. Using the calculated data, the feasibility of renewable energy is then determined based on the platform energy demand. (paper)

The Impact On The Product Development Process When Offshoring Or Outsourcing

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2010-01-01

This paper investigates the impact on the product development process when a company offshores or outsources a part of it abroad. Data was collected through interviews conducted in fi ve companies. The study showed that the impact can be both negative and positive. The key impact was the possibil......This paper investigates the impact on the product development process when a company offshores or outsources a part of it abroad. Data was collected through interviews conducted in fi ve companies. The study showed that the impact can be both negative and positive. The key impact...... was the possibility of a more complex development process due to cross-cultural virtual communication and collaboration. This meant a spiral development process is harder to offshore or outsource than a generic one. However, this complexity can be lessened by making the process or product simpler and by codifying...

Artificial intelligence applications in offshore oil and gas production

International Nuclear Information System (INIS)

Attia, F.G.

1994-01-01

The field of Artificial Intelligence (AI) has gained considerable acceptance in virtually all fields, of engineering applications. Artificial intelligence is now being applied in several areas of offshore oil and gas operations, such as drilling, well testing, well logging and interpretation, reservoir engineering, planning and economic evaluation, process control, and risk analysis. Current AI techniques offer a new and exciting technology for solving problems in the oil and gas industry. Expert systems, fuzzy logic systems, neural networks and genetic algorithms are major AI technologies which have made an impact on the petroleum industry. Presently, these technologies are at different stages of maturity with expert systems being the most mature and genetic algorithms the least. However, all four technologies have evolved such that practical applications were produced. This paper describes the four major Al techniques and their many applications in offshore oil and gas production operations. A summary description of future developments in Al technology that will affect the execution and productivity of offshore operations will be also provided

Product Platform Development in Industrial Networks

DEFF Research Database (Denmark)

Karlsson, Christer; Skold, Martin

2011-01-01

The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number o...... of platforms and product brands serve as the key dimensions when distinguishing the different strategies. Each strategy has its own challenges and raises various issues to deal with.......The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number...

The SPOT Project (Potentially Triggerable Offshore Seismicity and Tsunamis): a First Appraisal of the Possible Impact of Oil and Gas Platforms on the Seismic and Tsunami Risks along the Italian Coasts

Science.gov (United States)

Basili, R.; Di Bucci, D.; Antoncecchi, I.; Ciccone, F.; Teofilo, G.; Argnani, A.; Rovere, M.; Ligi, M.; Coltelli, M.; Lorito, S.; Borzi, B.; Germagnoli, F.; Di Ludovico, M.; Lignola, G. P.; Prota, A.

2017-12-01

The majority of oil and gas production in Europe takes place offshore and Italy is one of the European countries with the longest coastlines facing these operations. Given the generally growing energy demand, and the increasing concern toward human-driven hazards, scientists are called to provide background information for helping ensure a safe energy supply. We here present the activities of the project SPOT, which is aimed to help Italian authorities comply with the application of the Safety of Offshore Oil and Gas Operations European Directive (2013/30/EU) and the ensuing Italian codes. We carry out a reconstruction of offshore geological structures to assess the existence of potentially seismogenic faults in the surroundings of off-shore platforms. This study is a propaedeutic step for the assessment of potentially triggered seismicity connected with operations on such platforms. The descriptive parameters (3D geometry and behavior) of the identified faults will be used to estimate their natural earthquake rates. The impact of these natural earthquakes along the coasts will then be modeled in terms of expected ground shaking and tsunamis. The tsunamis potentially generated by submarine landslides induced by earthquake shaking will also be analyzed. In turn, these models will be used to estimate potential human and economic losses in a multi-hazard approach to risk assessment. Wherever the combined earthquake and tsunami modeling indicates a relevant impact along the coasts, a more detailed analysis will be carried out, also involving the operators of the related platforms, to perform specific models which also take into account production and/or storage data. Activities with a consolidated background, such as those concerning the impact scenarios of earthquakes, and more innovative activities, such as those dedicated to build up the first vulnerability/fragility curves related to tsunamis for the Italian building stock, will be integrated within the project

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

AFSC/NMML/CCEP: Characterizing and quantifying California sea lion and Pacific harbor seal use of offshore oil and gas platforms in California, 2013-2015

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — California sea lions (Zalophus californianus) and Pacific harbor seals (Phoca vitulina) use offshore oil and gas platforms as resting and foraging areas. Both...

Proceedings: An international workshop on offshore lease abandonment and platform disposal: Technology, regulation, and environmental effects

Energy Technology Data Exchange (ETDEWEB)

Pulsipher, A. [ed.] [Louisiana State Univ., Baton Rouge, LA (United States). Center for Energy Studies

1997-03-01

This Proceedings volume includes papers prepared for an international workshop on lease abandonment and offshore platform disposal. The workshop was held April 15, 16, and 17, 1996, in New Orleans, Louisiana. Included in the volume are several plenary speeches and issue papers. prepared by six working groups, who discussed: Abandoning Wells; Abandoning Pipelines; Removing Facilities; Site Clearance; Habitat Management, Maintenance, and Planning; and Regulation and Policy. Also included are an introduction, an afterword (reprinted with the permission of its author, John Lohrenz), and, as Appendix C, the complete report of the National Research Council Marine Boards An Assessment of Techniques for Removing Fixed Offshore Structures, around which much of the discussion at the workshop was organized. Short biographies of many speakers, organizers, and chairpersons are included as Appendix A. Appendix B is a list of conference participants. Selected papers have been processes separately for inclusion in the Energy Science and Technology database.

Thermal performance analysis of Brayton cycle with waste heat recovery boiler for diesel engines of offshore oil production facilities

International Nuclear Information System (INIS)

Liu, Xianglong; Gong, Guangcai; Wu, Yi; Li, Hangxin

2016-01-01

Highlights: • Comparison of Brayton cycle with WHRB adopted in diesel engines with and without fans by thermal performance. • Waste heat recovery technology for FPSO. • The thermoeconomic analysis for the heat recovery for FPSO. - Abstract: This paper presents the theoretical analysis and on-site testing on the thermal performance of the waste heat recovery system for offshore oil production facilities, including the components of diesel engines, thermal boilers and waste heat boilers. We use the ideal air standard Brayton cycle to analyse the thermal performance. In comparison with the traditional design, the fans at the engine outlet of the waste heat recovery boiler is removed due to the limited space of the offshore platform. The cases with fan and without fan are compared in terms of thermal dynamics performance, energy efficiency and thermo-economic index of the system. The results show that the application of the WHRB increases the energy efficiency of the whole system, but increases the flow resistance in the duct. It is proved that as the waste heat recovery boiler takes the place of the thermal boiler, the energy efficiency of whole system without fan is slightly reduced but heat recovery efficiency is improved. This research provides an important guidance to improve the waste heat recovery for offshore oil production facilities.

Investment in exploration-production and refining 2013

International Nuclear Information System (INIS)

Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio; Maisonnier, Guy

2013-10-01

IFPEN analyses in this study the 2013 evolution of global investment in the field of exploration-production and refining. 1 - Changes in oil and gas prices; 2 - Exploration production: a new year of growth: the increase in investments continues into 2013, exploration - Discoveries in 2013, 1978 - 2012: Investments - Production - Price; 3 - Main markets in the upstream oil equipment and services sector: introduction, drilling (Drilling activity, Number of wells drilled throughout the world, Number of onshore wells, Number of offshore wells, Drilling markets, equipment and services for wells, Onshore drilling market, Offshore drilling market, Fracking market); Geophysical market (Geophysical activity, Geophysical market); Offshore construction (Offshore construction activities, Fixed platforms (Jack-ups), Floating Platform Systems (FPS), Sub-sea constructions, Offshore construction market); Conclusion; 4 - Refining: looking for new equilibriums: falling excess capacity and regional disparities, recovery in capital spending in emerging countries, Asia is still the eldorado for investment in the downstream oil Sector (Continuing overcapacity in the medium-term, Differing investment strategies)

Absorption refrigeration cycle applied to offshore platforms; Refrigeracao por absorcao aplicada a plataformas de petroleo

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Maximino Joaquim Pina [KROMAV Engenharia, Rio de Janeiro, RJ (Brazil); Pinto, Luiz Antonio Vaz; Belchior, Carlos Rodrigues Pereira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

2004-07-01

To produce cold from the heat seems a task unlikely or even impossible. However, absorption systems produce cooling from heat sources and it exist since the century XIX. In industrial places is very important to improve the energy use, even more in places where the activities involve great costs and incomes. Traditionally the alternatives conflict in the aspects of initial and operational costs. This paper describes the absorption systems operation and its main advantages and disadvantages, when compared to the traditional systems with compressor. The known fact that a vapor compressor system presents larger efficiency is not enough to validate it for all of the applications. In this sense, the initial and operational analysis of the costs of the absorption systems becomes interesting. In spite of, double effect absorption systems are demonstrating the evolution of the absorption cycle in order to obtain better performance. Turbo-generators and Turbo-compressors of the offshore platforms are thermal machines that reject great amount of heat in the exhaust gases. This heat is used for heating of water used in the Process Plant. The processes of separation of the mixture water-oil-gas from the well, for instance, use that heat. Even after the passage of the water in the Plant of Process, the residual heat is still enough for the use in absorption systems. A simulation is done using real data of an offshore platform. Two possible alternatives are compared under technical and economical aspects. Sensibility analysis is also performed in order to verify possible impacts of variations of electric power cost. (author)

Numerical Prediction of Experimentally Observed Behavior of a Scale Model of an Offshore Wind Turbine Supported by a Tension-Leg Platform: Preprint

Energy Technology Data Exchange (ETDEWEB)

Prowell, I.; Robertson, A.; Jonkman, J.; Stewart, G. M.; Goupee, A. J.

2013-01-01

Realizing the critical importance the role physical experimental tests play in understanding the dynamics of floating offshore wind turbines, the DeepCwind consortium conducted a one-fiftieth-scale model test program where several floating wind platforms were subjected to a variety of wind and wave loading condition at the Maritime Research Institute Netherlands wave basin. This paper describes the observed behavior of a tension-leg platform, one of three platforms tested, and the systematic effort to predict the measured response with the FAST simulation tool using a model primarily based on consensus geometric and mass properties of the test specimen.

Ecological and political issues surrounding decommissioning of offshore oil facilities in the Southern California Bight

Science.gov (United States)

Schroeder, Donna M.; Love, Milton S.

2004-01-01

To aid legislators, resource managers, and the general public, this paper summarizes and clarifies some of the issues and options that the federal government and the state of California face in decommissioning offshore oil and gas production platforms, particularly as these relate to platform ecology. Both local marine ecology and political climate play a role in decommissioning offshore oil production platforms. Compared to the relatively supportive political climate in the Gulf of Mexico for “rigs-to-reefs” programs, conflicting social values among stakeholders in Southern California increases the need for understanding ecological impacts of various decommissioning alternatives (which range from total removal to allowing some or all of platform structure to remain in the ocean). Additional scientific needs in the decommissioning process include further assessment of platform habitat quality, estimation of regional impacts of decommissioning alternatives to marine populations, and determination of biological effects of any residual contaminants. The principal management need is a ranking of environmental priorities (e.g. species-of-interest and marine habitats). Because considerable numbers of economically important species reside near oil platforms, National Oceanic and Atmospheric Administration Fisheries should consider the consequences of decommissioning alternatives in their overall management plans. Management strategies could include designating reefed platforms as marine protected areas. The overarching conclusion from both ecological and political perspectives is that decommissioning decisions should be made on a case-by-case basis.

High-resolution onshore-offshore morpho-bathymetric records of modern chalk and granitic shore platforms in NW France

Science.gov (United States)

Duperret, Anne; Raimbault, Céline; Le Gall, Bernard; Authemayou, Christine; van Vliet-Lanoë, Brigitte; Regard, Vincent; Dromelet, Elsa; Vandycke, Sara

2016-07-01

Modern shore platforms developed on rocky coasts are key areas for understanding coastal erosion processes during the Holocene. This contribution offers a detailed picture of two contrasted shore-platform systems, based on new high-resolution shallow-water bathymetry, further coupled with aerial LiDAR topography. Merged land-sea digital elevation models were achieved on two distinct types of rocky coasts along the eastern English Channel in France (Picardy and Upper-Normandy: PUN) and in a NE Atlantic area (SW Brittany: SWB) in NW France. About the PUN case, submarine steps, identified as paleo-shorelines, parallel the actual coastline. Coastal erosive processes appear to be continuous and regular through time, since mid-Holocene at least. In SWB, there is a discrepancy between contemporary coastline orientation and a continuous step extending from inland to offshore, identified as a paleo-shoreline. This illustrates a polyphased and inherited shore platform edification, mainly controlled by tectonic processes.

Product Platform Replacements

DEFF Research Database (Denmark)

Sköld, Martin; Karlsson, Christer

2012-01-01

. To shed light on this unexplored and growing managerial concern, the purpose of this explorative study is to identify operational challenges to management when product platforms are replaced. Design/methodology/approach – The study uses a longitudinal field-study approach. Two companies, Gamma and Omega...... replacement was chosen in each company. Findings – The study shows that platform replacements primarily challenge managers' existing knowledge about platform architectures. A distinction can be made between “width” and “height” in platform replacements, and it is crucial that managers observe this in order...... to challenge their existing knowledge about platform architectures. Issues on technologies, architectures, components and processes as well as on segments, applications and functions are identified. Practical implications – Practical implications are summarized and discussed in relation to a framework...

Investigation on tempering of granular bainite in an offshore platform steel

Energy Technology Data Exchange (ETDEWEB)

Zhou, Yanlei; Jia, Tao; Zhang, Xiangjun [The State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, No. 11, Lane 3, Wenhua Road, HePing District, Shenyang 110819 (China); Liu, Zhenyu, E-mail: zyliu@mail.neu.edu.cn [The State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, No. 11, Lane 3, Wenhua Road, HePing District, Shenyang 110819 (China); Misra, R.D.K. [Department of Metallurgical and Materials Engineering, University of Texas at El Paso, 500 W. University Avenue, El Paso, TX 79968-0521 (United States)

2015-02-25

Granular bainite, where M-A constituents dispersed in bainitic ferrite matrix usually presents at the half thickness region in thermo-mechanically processed heavy gauge offshore platform steel. In the present work, the decomposition of M-A constituents during tempering at 600 °C was firstly revealed by transmission electron microscopy (TEM) analysis, which primarily involves the precipitation of cementite, recovery and recrystallization of highly dislocated ferrite matrix. Then, the effect of tempering on mechanical properties was investigated by tempering at different temperature for 60 min. Results indicated that, at tempering temperature of 500–600 °C, large quantity of micro-alloying carbides precipitated and partially compensated the loss of strength mainly due to the decomposition of M-A constituents. Compared with the as-rolled state, the decomposition of M-A constituents and softening of bainitic ferrite matrix after tempering have resulted in higher density of microvoids and substantial plastic deformation before impact failure.

Product Platform Screening at LEGO

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Steen Jensen, Thomas; Nielsen, Ole Fiil

2012-01-01

Product platforms offer great benefits to companies developing new products in highly competitive markets. Literature describes how a single platform can be designed from a technical point of view, but rarely mentions how the process begins. How do companies identify possible platform candidates...... after a few changes had been applied to the initial process layout. This case study shows how companies must focus on a limited selection of simultaneous projects in order to keep focus. Primary stakeholders must be involved from the very beginning, and short presentations of the platform concepts...

Go to work or report sick? A focus group study on decisions of sickness presence among offshore catering section workers.

Science.gov (United States)

Krohne, Kariann; Magnussen, Liv Heide

2011-03-18

To identify and explore the factors promoting sickness presenteeism among offshore catering section workers. Twenty men and women, working in the offshore catering section onboard three offshore oil and gas production platforms on the Norwegian Continental Shelf, participated in three focus groups. Data from the focus groups were analysed according to a phenomenological approach, and supported by theories on presenteeism. The results show that the decision to attend work despite illness, first and foremost, was based on the severity of the health complaint. Other factors identified were; the individual's location once the health complaint occurred, job satisfaction, the norms of the team, and experiences of how company policies on sickness absenteeism were implemented by the catering section leaders. Offshore working conditions may promote sickness presenteeism. The factors promoting sickness presenteeism onboard the platforms reflected experiences of a healthy work environment.

Floating Offshore Wind in California: Gross Potential for Jobs and Economic Impacts from Two Future Scenarios

Energy Technology Data Exchange (ETDEWEB)

Speer, Bethany [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-04-18

Construction of the first offshore wind farm in the United States began in 2015, using fixed platform structures that are appropriate for shallow seafloors, like those located off of the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to anchor to the deeper seafloor if deployed off of the West Coast. To analyze the employment and economic potential for floating offshore wind along the West Coast, the Bureau of Ocean Energy Management (BOEM) has commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical, large-scale deployment scenarios for California: 16 GW of offshore wind by 2050 (Scenario A) and 10 GW of offshore wind by 2050 (Scenario B). The results of this analysis can be used to better understand the general scales of economic opportunities that could result from offshore wind development. Results show total state gross domestic product (GDP) impacts of $16.2 billion in Scenario B or $39.7 billion in Scenario A for construction; and $3.5 billion in Scenario B or $7.9 billion in Scenario A for the operations phases.

PAH assessment in the main Brazilian offshore oil and gas production area using semi-permeable membrane devices (SPMD) and transplanted bivalves

Science.gov (United States)

André Lourenço, Rafael; Francisco de Oliveira, Fábio; Haddad Nudi, Adriana; Rebello Wagener, Ângela de Luca; Guadalupe Meniconi, Maria de Fátima; Francioni, Eleine

2015-06-01

The Campos Basin is Brazil's main oil and gas production area. In 2013, more than 50 million cubic meters of produced water (PW) was discharged into these offshore waters. Despite the large volumes of PW that are discharged in the Campos Basin each day, the ecological concern of the chemicals in the PW are not completely understood. Polycyclic aromatic hydrocarbons (PAH) are the most important contributors to the ecological hazards that are posed by discharged PW. This study aimed to evaluate the potential bioaccumulation of PAH using transplanted bivalves (Nodipecten nodosus) and semi-permeable membrane devices (SPMD). The study was conducted in two platforms that discharge PW (P19 and P40). Another platform that does not discharge PW (P25) was investigated for comparison with the obtained results. Time-integrated hydrocarbon concentrations using SPMD and transplanted bivalves were estimated from the seawater near the three platforms. The bioaccumulation of the PAH in the transplanted bivalves at platforms P19 and P40 were up to fivefold greater than the bioaccumulation of the PAH at platform P25. The lowest PAH concentrations were estimated for platform P25 (4.3-6.2 ng L-1), and the highest PAH concentrations were estimated for platform P19 (9.2-37.3 ng L-1). Both techniques were effective for determining the bioavailability of the PAH and for providing time-integrated hydrocarbon concentrations regarding oil and gas production activities.

California study compares natural/drilling discharge contaminants offshore

International Nuclear Information System (INIS)

Steinhauer, W.G.; Imamura, E.; Barminski, J.R.; Neff, J.M.

1992-01-01

An analysis of drilling fluid and this paper reports that cuttings discharges in the southern Santa Maria basin offshore California indicates that the amount of metal and hydrocarbon contaminants from drilling operations is small relative to that from natural sources. The metal and hydrocarbon discharges were calculated for only one of the three platforms discharging between 1986 and 1989 in the Point Arguello field. However, assuming concentrations are similar on each platform, the combined input of metals and hydrocarbons over the 3-year period was still low (except for barium and lead) compared to the average annual flux from natural sources. The MMS is monitoring the Santa Maria basin to understand possible long-term environmental effects of oil and gas development (California Monitoring Program, Phase II; and Effects of OCS Production Platforms on Rocky Reef Fishes and Fisheries). A site-specific study area was established to determine effects of drilling-related discharges at Chevron U.S.S. Inc.'s platform Hidalgo in the Point Arguello field. Part of the study included review of discharge records for platforms Hidalgo, Hermosa (Chevron), and Harvest (Texaco Exploration and Production Inc.)

Peru seeking buyer for productive offshore tract

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Petroleos del Peru (Petroperu) is seeking a buyer for its Petromar offshore exploration and production unit. Peru's national oil company wants to sell Petromar acreage, production, and production installations on Block Z-2b for $200 million, payable at $10 million/year for 20 years, plus a share of future production. Petroperu is offering a full interest petroleum exploration and exploitation contract for 30 years for oil and as long as 40 years in the case of gas exploitation. The company seeking the smallest share of current and incremental future production to operate Block Z-2b will be awarded the acreage. Petromar's sale is the latest announced under Peru's privatization program ordered by President Alberto Jujimori

Go to work or report sick? A focus group study on decisions of sickness presence among offshore catering section workers

Directory of Open Access Journals (Sweden)

Krohne Kariann

2011-03-01

Full Text Available Abstract Background To identify and explore the factors promoting sickness presenteeism among offshore catering section workers. Methods Twenty men and women, working in the offshore catering section onboard three offshore oil and gas production platforms on the Norwegian Continental Shelf, participated in three focus groups. Data from the focus groups were analysed according to a phenomenological approach, and supported by theories on presenteeism. Results The results show that the decision to attend work despite illness, first and foremost, was based on the severity of the health complaint. Other factors identified were; the individual's location once the health complaint occurred, job satisfaction, the norms of the team, and experiences of how company policies on sickness absenteeism were implemented by the catering section leaders. Conclusions Offshore working conditions may promote sickness presenteeism. The factors promoting sickness presenteeism onboard the platforms reflected experiences of a healthy work environment.

Comparative study of the sources of exergy destruction on four North Sea oil and gas platforms

DEFF Research Database (Denmark)

Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian

2013-01-01

temperatures and pressures, gas- and water-to-oil ratios in the feed, crude oil properties, product specifications and recovery strategies. These differences imply that some platforms naturally need less power for oil and gas processing than others. Reservoir properties and composition also vary over......In this paper, the oil and gas processing systems on four North Sea offshore platforms are reported and discussed. Sources of exergy destruction are identified and the findings for the different platforms are compared. Different platforms have different working conditions, such as reservoir...... the lifetime of an oil field, and to maintain the efficiency of an offshore platform is therefore challenging. In practice, variations in the process feed result in the use of control strategies such as anti-surge recycling, which cause additional power consumption and exergy destruction. For all four...

ESTIMATION OF AGING EFFECTS OF PILES IN MALAYSIAN OFFSHORE LOCATIONS

Directory of Open Access Journals (Sweden)

JERIN M. GEORGE

2017-04-01

Full Text Available An increasing demand for extending life and subsequently higher loading requirements of offshore jacket platforms are among the key problems faced by the offshore industry. The Aging effect has been proved to increase the axial capacity of piles, but proper methods to estimate and quantify these effects have not been developed. Borehole data from ten different Malaysian offshore locations have been analysed and they were employed to estimate the setup factor for different locations using AAU method. The setup factors found were used in the Skov and Denver equation to calculate capacity ratios of the offshore piles. The study showed that there will be an average improvement in the axial capacity of offshore piles by 42.2% and 34.9% for clayey and mixed soils respectively after a time equal to the normal design life (25 years of a jacket platform.

Preliminary Design of a Multi-Column TLP Foundation for a 5-MW Offshore Wind Turbine

OpenAIRE

Yongsheng Zhao; Jianmin Yang; Yanping He

2012-01-01

Currently, floating wind turbines (FWTs) may be the more economical and suitable systems with which to exploit offshore wind energy in deep waters. Among the various types of floating foundations for offshore wind farms, a tension leg platform (TLP) foundation can provide a relatively stable platform for currently available offshore wind turbines without requiring major modifications. In this study, a new multi-column TLP foundation (WindStar TLP) was developed for the NREL 5-MW offshore wind...

Wave run-up on offshore wind turbine foundations

DEFF Research Database (Denmark)

Baden, Elisabeth; Skourup, Jesper; Andersen, Thomas Lykke

2012-01-01

Wave run-up on appurtenances like boat landings, ladders, platforms and J-tubes of Offshore Wind Turbine foundations have in some cases caused severe and costly damage to these installations. A well-known example of large run-up was registered at the foundations of Horns Reef Offshore Wind Farm, ...

Geotechnical conditions and ice loading for an offshore drilling platform in the Canadian Beaufort Sea

Energy Technology Data Exchange (ETDEWEB)

Martens, S.; Eshraghian, A.; Rogers, B. [Klohn Crippen Berger Ltd., Calgary, AB (Canada)

2009-07-01

This paper addressed the geotechnical aspects of the deployment of the steel drilling caisson (SDC) at the Paktoa site in the Canadian Beaufort Sea. The SDC is a bottom founded mobile offshore drilling platform that can operate in 8 to 25 m of water in an Arctic environment. It is mated to a submersible barge in order to resist large ice forces on the structure at sites with relatively weak soils, without the need for site preparation. To date, the SDC has been deployed at 8 sites in the Canadian and Alaskan Beaufort Sea. This paper focused on the Paktoa location, where the SDC was deployed 50 km offshore in a water depth of 14 m during the winter of 2005-2006. Geotechnical investigations were conducted from the landfast ice prior to deployment and from the SDC deck. This paper described the soil properties and design loading; design stability; and deformation analysis. The environmental loads considered for the SDC design included ice push, waves and earthquakes. The ice loading was the dominant loading case. The instrumentation installed in the seabed included 2 push-in piezometers and an inclinometer. An ice loading event in February 2006 resulted in considerable displacements in the in-place inclinometer string below the SDC. Several analysis methods were used to estimate the magnitude of the ice load during this event in order to better understand the magnitude of ice loading for future Arctic deployments of gravity based drilling platforms. It was concluded that further deployments should have a minimum of 2 and preferably 4 in-place inclinometer strings to measure real-time deformation of the seabed to enable measurement of rotation of the structure that may occur due to asymmetrical ice loading. 10 refs., 2 tabs., 15 figs.

Combatting operational pollution from offshore petroleum activities: international legal regime

International Nuclear Information System (INIS)

Vinogradov, S.V.; Wagner, J.P.

1997-01-01

Existing global and regional rules and regulations, and regulatory trends, aimed at curbing pollution associated with the normal operation of offshore oil and gas installations are assessed. The designation 'operational pollution' is used to cover a variety of discharges including: oil produced in water; contaminated drill cuttings and muds; sewage; garbage; deck drainage; naturally occurring materials such as radionuclides, heavy metals and aromatics; atmospheric emissions, principally CO 2 , SO x , NO x , CH 4 and volatile organic compounds. The main focus of regulatory attention at present is platform drainage, offshore processing drainage, production water discharge, and displacement discharge. The legal framework considered extends to the appropriate global and regional treaties, ''soft law'' instruments and recommendations. (UK)

Global Production: The Case of Offshore Programming

DEFF Research Database (Denmark)

Nørbjerg, Jacob; Havn, Erling; Bansler, Jørgen P.

1997-01-01

of software is no exception.In this paper, we present a newly started research project on offshore program-ming, that is the practice of sending software development “offshore,” to India or other low wage areas. The project focuses on the organisation of offshore program-ming and, particularly, on the role...

Hibernia platform is a home away from home

International Nuclear Information System (INIS)

Anon.

1997-01-01

Facilities for everyday living on the Hibernia offshore platform were described. Hibernia offshore employees will typically work three weeks on, three weeks off, serving 12 hours a day, seven days a week. Coordinators of the living quarters made quality of life their major priority. The facilities are equal to or better than any offshore installation in the world. The platform will generally accommodate 180 personnel, but can have a maximum occupancy of up to 360 people

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Effect of Friction-Induced Nonlinearity on OMA-Identified Dynamic Characteristics of Offshore Platform Models

DEFF Research Database (Denmark)

Friis, Tobias; Orfanos, Antonios; Katsanos, Evangelos

The identification of the modal characteristics of engineering systems under operational conditions is commonly conducted with the use of the Operational Modal Analysis (OMA), being a class of useful tools employed within various fields of structural, mechanical as well as marine and naval...... engineering. The current OMA methods have been advanced on the basis of two fundamental, though, restrictive assumptions: (i) linearity and (ii) stationarity. Nevertheless, there are several applications that are inherently related to various nonlinear mechanisms, which, in turn, violate the two cornerstones...... of OMA and hence, question its robustness and efficiency. Along these lines, the current study addresses the effect of friction-induced nonlinearity on OMA-identified dynamic characteristics of an experimental set up consisting of a pair of reduced scale offshore platform models that are connected...

Contrasting platform thinking and product modularization

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth; Persson, Magnus

2015-01-01

Product modularization and platform thinking are both practices that seek to alleviate the negative impact of product customization and variety on internal operations by relying on economies of substitution. Through the use of a standardized pool of components and interfaces, these practices aim...... to create a broad spectrum of product choices. At first sight, product modularization and platform thinking are very similar. The difference between these practices can, however, be found in the manner in which they employ standardization. Where product modularization focuses on creating standardized...... variants. There is a general lack of research addressing the contingency factors that dictate the appropriateness of the use of product modularization and platform thinking in different contexts. To our knowledge, no large-scale empirical research has been reported in which the two concepts, contextual...

Federal offshore statistics: 1995 - leasing, exploration, production, and revenue as of December 31, 1995

International Nuclear Information System (INIS)

Gaechter, R.A.

1997-01-01

This report provides data on federal offshore operations for 1995. Information is included for leasing activities, development, petroleum and natural gas production, sales and royalties, revenue from federal offshore leasing, disbursement of federal revenues, reserves and resource estimates, and oil pollution in U.S. and international waters

Radionuclides, Metals, and Hydrocarbons in Oil and Gas Operational Discharges and Environmental Samples Associated with Offshore Production Facilities on the Texas/Louisiana Continental Shelf with an Environmental Assessment of Metals and Hydrocarbons

International Nuclear Information System (INIS)

1997-06-01

This report presents concentrations of radionuclides, metals, and hydrocarbons in samples of produced water and produced sand from oil and gas production platforms located offshore Texas and Louisiana. concentrations in produced water discharge plume / receiving water, ambient seawater, sediment, interstitial water, and marine animal tissue samples collected in the vicinity of discharging platforms and reference sites distant from discharges are also reported and discussed. An environmental risk assessment is made on the basis of the concentration of metals and hydrocarbons determined in the samples

Radionuclides, Metals, and Hydrocarbons in Oil and Gas Operational Discharges and Environmental Samples Associated with Offshore Production Facilities on the Texas/Louisiana Continental Shelf with an Environmental Assessment of Metals and Hydrocarbons.

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

This report presents concentrations of radionuclides, metals, and hydrocarbons in samples of produced water and produced sand from oil and gas production platforms located offshore Texas and Louisiana. concentrations in produced water discharge plume / receiving water, ambient seawater, sediment, interstitial water, and marine animal tissue samples collected in the vicinity of discharging platforms and reference sites distant from discharges are also reported and discussed. An environmental risk assessment is made on the basis of the concentration of metals and hydrocarbons determined in the samples.

Radionuclides, Metals, and Hydrocarbons in Oil and Gas Operational Discharges and Environmental Samples Associated with Offshore Production Facilities on the Texas/Louisiana Continental Shelf with an Environmental Assessment of Metals and Hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Continental Shelf Associates, Inc.

1999-08-16

This report presents concentrations of radionuclides, metals, and hydrocarbons in samples of produced water and produced sand from oil and gas production platforms located offshore Texas and Louisiana. Concentrations in produced water discharge plume/receiving water, ambient seawater, sediment, interstitial water, and marine animal tissue samples collected in the vicinity of discharging platforms and reference sites distant from discharges are also reported and discussed. An environmental risk assessment is made on the basis of the concentrations of metals and hydrocarbons determined in the samples.

Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

Directory of Open Access Journals (Sweden)

Young-Joo Song

2011-09-01

In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

Structural steels for fixed offshore platforms: technical challenges at the Brazilian national supply chain; Acos estruturais para plataformas fixas offshore: desafios tecnicos junto a cadeia de suprimentos nacional brasileira

Energy Technology Data Exchange (ETDEWEB)

Castro, Fabio Modesti Orsini de [Promon Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

2012-07-01

This paper presents the main technical requirements for structural steel applied to the construction of bottom fixed offshore platforms, based on the most widely adopted and recognized actual standards. The mechanical properties and lab tests necessary to fulfill the Risk Management and E and P companies requirements are presented aiming to build the theoretical bases necessary for the engineering design of projects of this kind. The main types of steel available in the national market are presented at the end, giving an overall look at the Brazilian steel supply chain. (author)

The U.S. Department of Energy's Reference Facility for Offshore Renewable Energy (RFORE): A New Platform for Research and Development (Invited)

Science.gov (United States)

Shaw, W. J.

2013-12-01

Offshore renewable energy represents a significant but essentially untapped electricity resource for the U.S. Offshore wind energy is attractive for a number of reasons, including the feasibility of using much larger and more efficient wind turbines than is possible on land. In many offshore regions near large population centers, the diurnal maximum in wind energy production is also closely matched to the diurnal maximum in electricity demand, easing the balancing of generation and load. Currently, however, the cost of offshore wind energy is not competitive with other energy sources, including terrestrial wind. Two significant contributing reasons for this are the cost of offshore wind resource assessment and fundamental gaps in knowledge of the behavior of winds and turbulence in the layer of the atmosphere spanned by the sweep of the turbine rotor. Resource assessment, a necessary step in securing financing for a wind project, is conventionally carried out on land using meteorological towers erected for a year or more. Comparable towers offshore are an order of magnitude more expensive to install. New technologies that promise to reduce these costs, such as Doppler lidars mounted on buoys, are being developed, but these need to be validated in the environment in which they will be used. There is currently no facility in the U.S. that can carry out such validations offshore. Research needs include evaluation and improvement of hub-height wind forecasts from regional forecast models in the marine boundary layer, understanding of turbulence characteristics that affect turbine loads and wind plant efficiency, and development of accurate representations of sea surface roughness and atmospheric thermodynamic stability on hub height winds. In response to these needs for validation and research, the U.S. Department of Energy is developing the Reference Facility for Offshore Renewable Energy (RFORE). The RFORE will feature a meteorological tower with wind, temperature

Quality Control of Installation and Commissioning of Offshore Platform Instrument System%海上平台仪表安装调试质量控制分析

Institute of Scientific and Technical Information of China (English)

周永辉

2016-01-01

The instrument installation and commissioning work is a very important work in offshore oil platform construction and renovation process, the overall quality control is to ensure the intelligent control instrument play a role. This paper is based on the basic situation of offshore oil engineering automation instrument, analysis of the quality control factors of automation instrumentation engineering, finally discusses the technical measures of quality control of offshore oil platform automation instrument engineering.%仪表安装调试是海上石油平台建设、改造中一项非常重要的工作，全面的质量控制是自动化仪表设备发挥智能控制作用的保证。本文立足于海洋石油自动化仪表工程基本情况，分析自动化仪表工程质量控制因素，最后讨论了海上石油平台自动化仪表工程质量控制的技术措施。

Panorama 2012 - Offshore hydrocarbons

International Nuclear Information System (INIS)

Serbutoviez, Sylvain

2011-12-01

Technological progress is enabling production from offshore oil and gas fields at increasingly ambitious depths (3, 000 metres). Investment in offshore production is running at around $100 billion per year, accounting for one-fifth of all investment in oil exploration and development worldwide. However, the global economic crisis that broke at the end of 2008 and the accident involving the Macondo well temporarily disrupted the race to deep offshore technology. (author)

Stratifying the Develoment of Product Platforms

DEFF Research Database (Denmark)

Sköld, Martin; Karlsson, Christer

2013-01-01

companies develop platforms for different aims, purposes, and product scopes. Following on from this, the requirements for platform development resources, the ways of organizing platform development, and the implications for management styles have not been explored and are presumably varying. To start...... influencing the project length, requirements for platform development resources, principles for organizing, and implications for management styles....

Offshore Supply Industry Dynamics

DEFF Research Database (Denmark)

Roslyng Olesen, Thomas

This report is part of the research project “The competitive challenges and strategic development possibilities for The Blue Denmark”, which was launched in 2014. The project is funded by the Danish Maritime Fund and carried out by researchers at CBS Maritime which is a Business in Society Platform...... with companies in the maritime sector. This report “Offshore Supply Industry Dynamics – Business strategies in the offshore supply industry” is the second report in mapping project D. It examines the markets and business strategies of various suppliers and furthermore presents an analysis of the challenges...... at Copenhagen Business School with a focus on value creation in the maritime industries. The project embraces various maritime segments from shipping and offshore to ports and suppliers. The research questions for the individual projects have been formulated by researchers at CBS Maritime in cooperation...

China places first self-financed offshore development on production

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that China's Bohai Oil Co. (BOC) last month started up its first exclusively self-financed offshore petroleum development. Jinzhou 20-2 oil and gas/condensate field went on stream in the Liaodong Bay area of the Bohai Sea with production of 53 MMcfd of gas and 3,019 b/d of condensate

Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

Science.gov (United States)

Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

2015-02-28

The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Canada-Newfoundland Offshore Petroleum Board : annual report 1998/1999

International Nuclear Information System (INIS)

1999-01-01

Financial information from the Canada-Newfoundland Offshore Petroleum Board and a review of their operations was presented. The Board manages the petroleum resources in the Newfoundland Offshore area on behalf of the Canadian Government and the Newfoundland and Labrador Government. The Board ensures that resource development is conducted in accordance with good oilfield practice to optimize recovery and avoid waste. Energy resource activities were summarized. A total of nine offshore seismic surveys were completed during the summer of 1998, the largest acquisition of seismic data in any one year. The surveys recorded 76,000 km of 2-D and 3-D seismic data. The drilling and production activities of the Hibernia field were also reviewed. 24 million bbls of oil were produced from the platform during the 1998 calendar year. The Terra Nova project continues to progress for a first oil target date of late 2000. This report presented an operations review, exploration activity, and consolidated financial statements. Revenue and expenditure statements were summarized by source. tabs., figs

Offshore industry: medical emergency response in the offshore oil and gas industry.

Science.gov (United States)

Ponsonby, Will; Mika, Frano; Irons, Greg

2009-08-01

The hunt for oil and gas has taken workers into new more distant locations including those offshore. The remoteness of the offshore platforms and vessels coupled with the potential risk of being cut off by bad weather presents particular challenges for medical emergency response (MER). Firstly to define the challenges for MER in terms of locations, population and epidemiology of injuries and illnesses in the offshore environment. Secondly to give examples of legal requirements and industry standards to manage MER. Thirdly to look at existing and emerging practice to manage these challenges. A review of published literature was supplemented with a summary of current practice in the industry. Medical professionals (medics) working offshore on installations and vessels are primarily responsible for the medical care of the workers. The medics have clinics with suitable medical equipment for managing emergencies as well as providing limited primary care. Some countries have legislation that stipulate minimum requirements. Where there is no national legislation, industry and company guidance is used to define the MER standards. Supervision of the offshore medics is often provided by doctors on shore via radio and phone links. These methods of communication are now being augmented with more sophisticated telemedicine solutions such as the Internet and live video links. These newer solutions allow for prompt high-quality care and provide the scope for a variety of new treatment options to be available for the offshore workforce.

Offshore in depth

Energy Technology Data Exchange (ETDEWEB)

Ebdon, J F

1968-08-01

The world-wide scope of offshore areas is discussed. Offshore areas of the U.S. and the world are where one of the ''hottest'' hydrocarbon booms--drilling, production, and pipelining--are in action today. Most of the current activity in offshore exploration and drilling is crude oil directed. However, big non-associated natural gas finds have been made. Additionally, for every barrel of crude oil produced, either or both associated natural gas and dissolved natural gas are produced in some varying ratio as casinghead gas. Thus, with worldwide production of some 2.5-million bbl of crude oil per day from offshore areas of Free-World countries, there are vast volumes of casinghead natural gas produced, over and above that produced from non-associated natural gas wells to the seaward of land masses. If offshore gas of any classification is produced in commercial volumes close to onshore population centers, then the possibility of marketing is fairly good. If remote from population centers, it is usually flared or shut-in. The development of gas liquefaction and cryogenic tankers has started, but international ocean traffic in LNG is still in its infancy. Current offshore gas pipelines are described.

Meeting the Global Challenge through Production Offshoring

DEFF Research Database (Denmark)

Slepniov, Dmitrij

to the current debates about how these firms could assert themselves in a world of far-reaching transformation. As the title of the study suggests, this contribution is made through focusing the discussion upon production offshoring, which is currently commanding attention of so many practitioners, academics...... and policy makers. Building on ground that is already well trodden within the academic literature, the study searches for novel multidisciplinary explanations about how the production function can be organised by lead firms on a global scale and, more importantly, what the strategic implications...... of this process are. While the study concentrates on the production function, the implications of the discussion stretch much wider; the study also reveals implications for other functions and the company as a whole, as well as it points towards broader societal implications. The study employs a qualitative...

Offshoring Process

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Sørensen, Brian Vejrum; Katayama, Hiroshi

2011-01-01

The purpose of this chapter is to contribute to the knowledge on how production offshoring and international operations management vary across cultural contexts. The chapter attempts to shed light on how companies approach the process of offshoring in different cultural contexts. In order...... of globalisation. Yet there are clear differences in how offshoring is conducted in Denmark and Japan. The main differences are outlined in a framework and explained employing cultural variables. The findings lead to a number of propositions suggesting that the process of offshoring is not simply a uniform...... technical-rational calculation of the most efficient organisation of activities across national borders, but it is rather specific to the parent companies’ national contexts....

SEASAT demonstration experiments with the offshore oil, gas and mining industries

Science.gov (United States)

Mourad, A. G.; Robinson, A. C.; Balon, J. E.

1979-01-01

Despite its failure, SEASAT-1 acquired a reasonable volume of data that can be used by industrial participants on a non-real-time basis to prove the concept of microwave sensing of the world's oceans from a satellite platform. The amended version of 8 experimental plans are presented, along with a description of the satellite, its instruments, and the data available. Case studies are summarized for the following experiments: (1) Beaufort Sea oil, gas, and Arctic operations; (2) Labrador Sea oil, gas, and sea ice; (3) Gulf of Mexico pipelines; (4) U.S. East Coast offshore oil and gas; (5) worldwide offshore drilling and production operations; (6) Equatorial East Pacific Ocean mining; (7) Bering Sea ice project; and (8) North Sea oil and gas.

Characterizing pinniped use of offshore oil and gas platforms as haulouts and foraging areas in waters off southern California from 2013-01-01 to 2015-01-31 (NCEI Accession 0138984)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — California sea lions (Zalophus californianus) and Pacific harbor seals (Phoca vitulina) use offshore oil and gas platforms as resting and foraging areas. Both...

Overall Optimization for Offshore Wind Farm Electrical System

DEFF Research Database (Denmark)

Hou, Peng; Hu, Weihao; Chen, Cong

2017-01-01

Based on particle swarm optimization (PSO), an optimization platform for offshore wind farm electrical system (OWFES) is proposed in this paper, where the main components of an offshore wind farm and key technical constraints are considered as input parameters. The offshore wind farm electrical...... system is optimized in accordance with initial investment by considering three aspects: the number and siting of offshore substations (OS), the cable connection layout of both collection system (CS) and transmission system (TS) as well as the selection of electrical components in terms of voltage level...... that save 3.01% total cost compared with the industrial layout, and can be a useful tool for OWFES design and evaluation....

Motion Performance and Mooring System of a Floating Offshore Wind Turbine

Institute of Scientific and Technical Information of China (English)

Jing Zhao; Liang Zhang; Haitao Wu

2012-01-01

The development of offshore wind farms was originally carried out in shallow water areas with fixed (seabed mounted) structures.However,countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas.The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform.This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine (FOWT) system.The wind turbine was modeled as a wind block with a certain thrust coefficient,and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software.The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined.The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.

Motion performance and mooring system of a floating offshore wind turbine

Science.gov (United States)

Zhao, Jing; Zhang, Liang; Wu, Haitao

2012-09-01

The development of offshore wind farms was originally carried out in shallow water areas with fixed (seabed mounted) structures. However, countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas. The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform. This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine (FOWT) system. The wind turbine was modeled as a wind block with a certain thrust coefficient, and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software. The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined. The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.

Les ouvrages pétroliers en mer Offshore Petroleum Structures

Directory of Open Access Journals (Sweden)

Susbielles G.

2006-11-01

Full Text Available Dans la conjoncture actuelle, la situation de l'offshore pétrolier semble plus prometteuse que par un passé récent car, au moins, soixante pays ont des ressources existantes ou possibles. Depuis 1975, la technique pétrolière a continué à progresser mais, surtout dans le domaine du développement des champs. Pour les plates-formes de production en acier, celles des champs de Cognac, Hondo, Ninian et Maureen se distinguent des autres, soit par leur architecture, soit par leurs dimensions. Les plates-formes en béton sont installées, pour la plupart, en mer du Nord, celle du champ de Ninian dépassant toutes les autres en dimensions. Une exception, le Brésil, avec trois plates-formes en eau peu profonde. Pour les champs marginaux, ou pour préciser les caractéristiques d'un gisement découvert, la mise en production se fait à partir de têtes de puits sous-marines, d'un manifold et de liaisons à un ouvrage flottant (plate-forme semi-submersible, tanker. Peu de modifications ont été apportées aux plates-formes semi-submersibles. Seule la plate-forme Sedco 709 est différente des autres car elle est positionnée dynamiquement. Les plus importantes opérations de levage en mer sont assurées par des grues de très forte capacité. La conception des postes de chargement reste le domaine de quelques sociétés. Quant à la pose de pipelines et de conduites, elle a évolué par l'apparition d'ouvrages tels que les barges Castoro VI de Saipem et Apache de Santa Fe et le navire Flexservice 1. Il reste aux ingénieurs à créer des systèmes de développements en mer profonde (au-delà de 500 m de profondeur d'eau. Within the present economic context, the offshore petroleum situation seems more promising than in the recent past because at least sixty countries have existing or possible resources. Since 1975 petroleum technology has continued ta advance, especially in the area of field development. For steel production platforms, the ones on

Demonstrating multi-layered MAS in control of offshore oil and gas production

DEFF Research Database (Denmark)

Lindegaard Mikkelsen, Lars; Næumann, J. R.; Demazeau, Y.

2013-01-01

From a control perspective, offshore oil and gas production is very challenging due to the many and potentially conflicting production objectives that arise from the intrinsic complexity of the oil and gas domain. In this paper, we demonstrate how a multi-layered multi-agent system can be used in...

Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design

OpenAIRE

Matha, Denis; Sandner, Frank; Molins i Borrell, Climent; Campos Hortigüela, Alexis; Cheng, Po Wen

2015-01-01

The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provide...

The Effects of Anthropogenic Structures on Habitat Connectivity and the Potential Spread of Non-Native Invertebrate Species in the Offshore Environment.

Science.gov (United States)

Simons, Rachel D; Page, Henry M; Zaleski, Susan; Miller, Robert; Dugan, Jenifer E; Schroeder, Donna M; Doheny, Brandon

2016-01-01

Offshore structures provide habitat that could facilitate species range expansions and the introduction of non-native species into new geographic areas. Surveys of assemblages of seven offshore oil and gas platforms in the Santa Barbara Channel revealed a change in distribution of the non-native sessile invertebrate Watersipora subtorquata, a bryozoan with a planktonic larval duration (PLD) of 24 hours or less, from one platform in 2001 to four platforms in 2013. We use a three-dimensional biophysical model to assess whether larval dispersal via currents from harbors to platforms and among platforms is a plausible mechanism to explain the change in distribution of Watersipora and to predict potential spread to other platforms in the future. Hull fouling is another possible mechanism to explain the change in distribution of Watersipora. We find that larval dispersal via currents could account for the increase in distribution of Watersipora from one to four platforms and that Watersipora is unlikely to spread from these four platforms to additional platforms through larval dispersal. Our results also suggest that larvae with PLDs of 24 hours or less released from offshore platforms can attain much greater dispersal distances than larvae with PLDs of 24 hours or less released from nearshore habitat. We hypothesize that the enhanced dispersal distance of larvae released from offshore platforms is driven by a combination of the offshore hydrodynamic environment, larval behavior, and larval release above the seafloor.

Fresh water generators onboard a floating platform

International Nuclear Information System (INIS)

Tewari, P.K.; Verma, R.K.; Misra, B.M.; Sadhulkan, H.K.

1997-01-01

A dependable supply of fresh water is essential for any ocean going vessel. The operating and maintenance personnel on offshore platforms and marine structures also require a constant and regular supply of fresh water to meet their essential daily needs. A seawater thermal desalination unit onboard delivers good quality fresh water from seawater. The desalination units developed by Bhabha Atomic Research Centre (BARC) suitable for ocean going vessels and offshore platforms have been discussed. Design considerations of such units with reference to floating platforms and corrosive environments have been presented. The feasibility of coupling a low temperature vacuum evaporation (LTVE) desalination plant suitable for an onboard floating platform to a PHWR nuclear power plant has also been discussed. (author). 1 ref., 3 figs, 2 tabs

Routing helicopters for crew exchanges on off-shore locations

NARCIS (Netherlands)

Sierksma, G.; Tijssen, G.A.

This paper deals with a vehicle routing problem with split demands, namely the problem of determining a flight schedule for helicopters to off-shore platform locations for exchanging crew people employed on these platforms. The problem is formulated as an LP model and solved by means of a

Modern earthquake engineering offshore and land-based structures

CERN Document Server

Jia, Junbo

2017-01-01

This book addresses applications of earthquake engineering for both offshore and land-based structures. It is self-contained as a reference work and covers a wide range of topics, including topics related to engineering seismology, geotechnical earthquake engineering, structural engineering, as well as special contents dedicated to design philosophy, determination of ground motions, shock waves, tsunamis, earthquake damage, seismic response of offshore and arctic structures, spatial varied ground motions, simplified and advanced seismic analysis methods, sudden subsidence of offshore platforms, tank liquid impacts during earthquakes, seismic resistance of non-structural elements, and various types of mitigation measures, etc. The target readership includes professionals in offshore and civil engineering, officials and regulators, as well as researchers and students in this field.

Image processing in offshore engineering

International Nuclear Information System (INIS)

Rodriguez, M.V.R.; A. Oliveira, M. de; Almeida, M.E.T. de; Lorenzoni, C.; Ferrante, A.J.

1995-01-01

The technological progress which has taken place during the last decade introduced a totally new outlook regarding the professional computational environment in general, and regarding the engineering profession in particular. During many years engineering computing was performed based on large computer centers, getting bigger and bigger all the time, going from mainframes to super computers, essentially producing numerical results on paper media. Lately, however, it has been realized that a much more productive computational environment can be implemented using an open architecture of client/server type, based on smaller lower cost equipment including workstations and PC's, and considering engineering information in a broader sense. This papers reports briefly the experience of the Production Department of Petrobras in transforming its centralized, mainframe based, computational environment into a open distributed client/server computational environment, focusing on the problem of handling technical graphics information regarding its more than 70 fixed offshore platforms

National Offshore Wind Energy Grid Interconnection Study

Energy Technology Data Exchange (ETDEWEB)

Daniel, John P. [ABB Inc; Liu, Shu [ABB Inc; Ibanez, Eduardo [National Renewable Energy Laboratory; Pennock, Ken [AWS Truepower; Reed, Greg [University of Pittsburgh; Hanes, Spencer [Duke Energy

2014-07-30

The National Offshore Wind Energy Grid Interconnection Study (NOWEGIS) considers the availability and potential impacts of interconnecting large amounts of offshore wind energy into the transmission system of the lower 48 contiguous United States. A total of 54GW of offshore wind was assumed to be the target for the analyses conducted. A variety of issues are considered including: the anticipated staging of offshore wind; the offshore wind resource availability; offshore wind energy power production profiles; offshore wind variability; present and potential technologies for collection and delivery of offshore wind energy to the onshore grid; potential impacts to existing utility systems most likely to receive large amounts of offshore wind; and regulatory influences on offshore wind development. The technologies considered the reliability of various high-voltage ac (HVAC) and high-voltage dc (HVDC) technology options and configurations. The utility system impacts of GW-scale integration of offshore wind are considered from an operational steady-state perspective and from a regional and national production cost perspective.

Review of Slug Detection, Modeling and Control Techniques for Offshore Oil & Gas Production Processes

DEFF Research Database (Denmark)

Pedersen, Simon; Løhndorf, Petar Durdevic; Yang, Zhenyu

2015-01-01

The current offshore oil & gas multi-phase production and transportation installations have big challenges related with the slugging flow: An unstable multi-phase flow regime where the flow rates, pressures and temperatures oscillate in the considered processes. Slug can be caused by different...... operating conditions and installation structures. The most severe slugs are often induced in long vertical risers or production wells, where liquid blocks gas at the riser/well base and correspondingly it causes the pressure to accumulate and hence originates the oscillating performance. There are many...... of these methods can simultaneously reduce the oil & gas production, which is a very big concern as the production rate is the key evaluation parameter for offshore production. We conclude that the slugging flow is a well-defined phenomenon, even though this subject has been extensively investigated in the past...

A multi-disciplinary European approach to developing technologies for the removal of offshore platforms

International Nuclear Information System (INIS)

Ebdon, R.W.; Surle, R.; Minardi, P.

1991-01-01

Three companies, AME from the UK, Comex from France and Tecnomare from Italy proposed to EC Directorate General for Energy to perform research and development studies of technology for the removal of offshore platforms. At the suggestion of the EC a co-operation was initiated between the three companies and this paper presents a brief outline of the projects and some results from the co-operative work. The results reported included those from a review of the possible removal techniques, the type of structures and the market potential for industry. The specific technologies studied by the individual companies were safe and reliable application of explosive shaped charges to the cutting of large steel jacket tubulars and the effect of underwater shock; establishing the performance of high pressure abrasive water jet cutting by means of extensive testing under hyperbaric conditions; and the design of a driverless underwater cutting system that can be integrated with advanced cutting techniques and provide a commercially viable facility. (author)

Carbonate platform growth and demise offshore Central Vietnam

DEFF Research Database (Denmark)

Fyhn, Michael B.W.; Boldreel, Lars Ole; Nielsen, Lars H.

2013-01-01

Fault Zone, the Tuy Hoa Carbonate Platform fringes the continental margin between Da Nang and Nha Trang. Here, platform growth initiated during the Early Miocene and continued until Middle Miocene time when regional uplift led to subaerial exposure, termination of platform growth and karstification...... continues on isolated platforms hosting the Paracel Islands farther seawards. The onset of widespread carbonate deposition largely reflects the Early Miocene transgression of the area linked with early post-rift subsidence and the opening of the South China Sea. The mid-Neogene shift in carbonate deposition...

Floating Offshore Wind in Hawaii: Potential for Jobs and Economic Impacts from Three Future Scenarios

Energy Technology Data Exchange (ETDEWEB)

Jimenez, Tony; Keyser, David; Tegen, Suzanne

2016-04-18

Construction of the first offshore wind power plant in the United States began in 2015, off the coast of Rhode Island, using fixed platform structures that are appropriate for shallow seafloors, like those located off the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to be anchored to the deeper seafloor if deployed in Hawaiian waters. To analyze the employment and economic potential for floating offshore wind off Hawaii's coasts, the Bureau of Ocean Energy Management commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical deployment scenarios for Hawaii: 400 MW of offshore wind by 2050 and 800 MW of offshore wind by 2050. The results of this analysis can be used to better understand the general scale of economic opportunities that could result from offshore wind development.

Complementors as Connectors: Open Innovation in Digital Product Platforms

NARCIS (Netherlands)

Hilbolling, Susan; Berends, Hans; Deken, F.; Tuertscher, Philipp

2018-01-01

Through open, standardized interfaces, autonomous third parties can develop complementary products and services for digital product platforms, but, at the same time, these third parties also establish connections that span multiple platforms - beyond the control of the platform owner. This paper

Fatigue Reliability and Calibration of Fatigue Design Factors for Offshore Wind Turbines

DEFF Research Database (Denmark)

Dominguez, Sergio Marquez; Sørensen, John Dalsgaard

2012-01-01

Consequences of failure of offshore wind turbines (OWTs) are in general lower than consequences of failure of, e.g., oil & gas platforms. It is reasonable that lower fatigue design factors can be applied for fatigue design of OWTs when compared to other fixed offshore structures. Calibration...

Distinguishing between contaminant and reef effects on meiofauna near offshore hydrocarbon platforms in the Gulf of Mexico

Energy Technology Data Exchange (ETDEWEB)

Montagna, P. A.; Jarvis, S. C. [Univ. of Texas at Austin, Marine Science Institute, Port Aransas, TX (United States); Kennicutt, M. C. [Texas A and M Univ., Geochemical and Environmental Research Group, College Station, TX (United States)

2002-10-01

The GEOMEX study which was initiated in 1993 successfully investigated the long-term effects of hydrocarbon production on macro- and meiobenthos at the community, population, organismic and suborganismic levels. It concluded that adverse effects were localized to within 100-200 m of production platforms. The current study was designed to distinguish between reef and contaminant effects on meiofaunal communities by comparing communities at production platforms, artificial reefs, platform removal sites and appropriate controls. The focus was on highly abundant and diverse meiobenthic harpacticoid copepods which exhibited negative effects in the GEOMEX study. The removal sites were found to have higher concentrations of many contaminants than reef or control sites, but lower concentrations than platform sites. Reduced meiobenthic abundance and altered Harpacticoida community structure were primarily a function of reef effects, not contaminant effects. The reef effect appeared to be important in controlling microfauna near platforms where contaminants were low because of drilling and production techniques in the Gulf of Mexico. The significant habitat influence was attributed to a variety of possible causes, such as increased food web activity related to primary production of hard-bottom algae, secondary production of fouling organisms or attraction of mobile fish and invertebrates. 23 refs., 6 tabs., 3 figs.

Fishing activity near offshore pipelines, 2017

NARCIS (Netherlands)

Machiels, Marcel

2018-01-01

On the North Sea bottom lie numerous pipelines to link oil- or gas offshore drilling units, - platforms and processing stations on land. Although pipeline tubes are coated and covered with protective layers, the pipelines risk being damaged through man-made hazards like anchor dropping and fishing

Dynamic analysis and design of offshore structures

CERN Document Server

Chandrasekaran, Srinivasan

2015-01-01

This book  attempts to provide readers with an overall idea of various types of offshore platform geometries. It covers the various environmental loads encountered by these structures, a detailed description of the fundamentals of structural dynamics in a class-room style, estimate of damping in offshore structures and their applications in the preliminary analysis and design. Basic concepts of structural dynamics are emphasized through simple illustrative examples and exercises. Design methodologies and guidelines, which are FORM based concepts are explained through a few applied example structures. Each chapter also has tutorials and exercises for self-learning. A dedicated chapter on stochastic dynamics will help the students to extend the basic concepts of structural dynamics to this advanced domain of research. Hydrodynamic response of offshore structures with perforated members is one of the recent research applications, which is found to be one of the effective manner of retrofitting offshore structur...

Current trends in offshore technology

International Nuclear Information System (INIS)

Korsgaard, J.

1994-01-01

Although this is a technical symposium concerning advances in the technology of producing oil and gas offshore, a keynote address would not be complete without mentioning non-technical factors which are extremely important for the business of producing oil and gas offshore. These are political factors and economic factors. Offshore operations are an easy target for political forces that are opposed to marine operations involving the production and transfer of hydrocarbons. For example, the oil pollution act of 1990 was a reaction to the Exxon Valdez grounding in Alaska and this act has added significantly to the risk and cost of operating offshore. Another example of this is that it is becoming more and more difficult to dispose of produced water offshore. Producing oil and gas offshore is a business that competes with other energy sources such as coal and oil and gas from wells on land. The offshore oil can only compete with these other resources by providing the same product at a competitive price. Since offshore operations are inherently more costly than land operations, the offshore oil field or gas field must be significantly larger than a land field in order to be produced. Also the offshore oil field or gas field is more susceptible to environmental risks from weather. On a more positive note, there are technical developments which are taking place and have continuously taken place to make offshore oil and gas both more economic and safer to produce. These developments are briefly discussed

Damage Detection in an Offshore Structure

DEFF Research Database (Denmark)

Brincker, Rune; Kirkegaard, Poul Henning; Andersen, P.

The structural integrity of a multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model....... By use of the estimates of the modal parameters and their corresponding variances a probability based damage indicator is formulated. This approach indicates, that since the construction of the platform, minor structural changes have taken place....

Damage Detection in an Offshore Structure

DEFF Research Database (Denmark)

Brincker, Rune; Kirkegaard, Poul Henning; Andersen, Palle

1995-01-01

The structural integrity of a multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model....... By use of the estimates of the modal parameters and their corresponding variances a probability based damage indicator is formulated. This approach indicates, that since the construction of the platform, minor structural changes have taken place....

Radiation dose and risk to recreational fishermen from ingestion of fish caught near eight oil platforms in the Gulf of Mexico

International Nuclear Information System (INIS)

Meinhold, A.F.; Holtzman, S.

1998-01-01

Offshore production of oil and gas is accompanied by a saline wastewater, called produced water. Produced water discharges to the Gulf of Mexico often contain elevated concentrations of radionuclides that occur naturally in the geologic reservoir along with the oil and gas. These radionuclides may accumulate in organisms that live near offshore oil and gas structures. Because recreational fishing in the Gulf of Mexico is concentrated near oil and gas platforms, there is the potential for increased risks to recreational fishermen from the ingestion of radionuclides in fish caught near produced water discharges. This analysis investigated the potential risk to recreational fishermen from radium and lead-210 in offshore produced water discharges to the Gulf of Mexico. The assessment used data collected at eight discharging offshore platforms and two reference locations. These data were collected in a USDOE funded project titled ''Environmental and Economic Assessment of Discharges from Gulf of Mexico Region Oil and Gas Operations'', here called the USDOE Field Study. The risk assessments were done to support risk managers in developing regulations and permits for offshore discharges of produced water

L'exploitation pétrolière offshore : production et sécurité Offshore Oil Production and Safety

Directory of Open Access Journals (Sweden)

Champlon D.

2006-11-01

Full Text Available Depuis la première découverte pétrolière réalisée en 1859, l'industrie pétrolière a connu une expansion considérable. Pour faire face à l'accroissement des besoins du monde en hydrocarbures, l'exploration des bassins sédimentaires susceptibles de contenir du pétrole ou du gaz naturel s'est progressivement développée. Compte tenu du potentiel prometteur en hydrocarbures des fonds marins, la recherche de nouveaux gisements s'est étendue aux bassins sédimentaires situés sous les océans, d'abord tout près des côtes, puis sur les plateaux continentaux (par moins de 200 m d'eau et maintenant, au-delà, par des profondeurs d'eau de plusieurs milliers de mètres. Cette expansion de l'offshore repose depuis 1960 sur la mise au point de techniques originales et multiples, à la mesure de la nouveauté et de la complexité des problèmes à résoudre. Parallèlement, le développement des activités offshore et maintenant la conquête des mers difficiles ou profondes ont suscité la mise en place de normes de sécurité et de réglementations très sévères afin de garantir une protection efficace des installations, des personnes et des autres usagers de la mer, et de prévenir tout danger de pollution éventuelle. Enfin, si l'on replace aujourd'hui l'ensemble des activités offshore dans le contexte énergétique mondial, on peut se poser deux questions - Le coût des opérations marines en mer ne devient-il pas prohibitif ? - La situation énergétique justifie-t-elle la conquête des mers de plus en plus profondes ? II serait vain de prétendre apporter dès aujourd'hui une réponse précise et catégorique à toutes ces interrogations. Néanmoins, l'analyse économique des activités offshore, la prise en compte de l'expérience du passé et l'extrapolation des tendances observées apportent déjà des éléments d'appréciation fort utiles. Since oil was first discovered in 1859, the petroleum industry has expanded considerably

Environmental data for the planning of off-shore wind parks from the EnerGEO Platform of Integrated Assessment (PIA)

Energy Technology Data Exchange (ETDEWEB)

Zelle, Hein; Mika, Agnes; Calkoen, Charles; Santbergen, Peter [BMT ARGOSS, Marknesse (Netherlands); Blanc, Isabelle; Guermont, Catherine; Menard, Lionel; Gschwind, Benoit [MINES ParisTech, Sophia Antipolis (France)

2013-07-01

The EU-sponsored EnerGEO project aims at providing decision makers with a modelling platform to assess the environmental impacts of different sources of renewable energy. One of the pillars of the project is the Wind Energy Pilot, addressing the effects of offshore wind parks on air pollution and energy use. The methods used in the pilot and the underlying environmental databases are integrated into a WebGIS client tool and made available to the public. This paper is dedicated to describing the environmental databases and supporting data incorporated in the client tool. A 27-km resolution, 11-year wind database is created using the WRF model. The wind database is used to assess the wind climate in the north-west Atlantic region and to derive the potential power output from offshore wind parks. Auxiliary data concerning water depth, distance to shore and distance to the nearest suitable port are created to aid the planning and maintenance phases. Seasonal workability conditions are assessed using a 20-year wave database. The distance at which future wind parks should be placed to exhibit different wind climates is investigated. (orig.)

Environmental data for the planning of off-shore wind parks from the EnerGEO Platform of Integrated Assessment (PIA)

International Nuclear Information System (INIS)

Zelle, Hein; Mika, Agnes; Calkoen, Charles; Santbergen, Peter; Blanc, Isabelle; Guermont, Catherine; Menard, Lionel; Gschwind, Benoit

2013-01-01

The EU-sponsored EnerGEO project aims at providing decision makers with a modelling platform to assess the environmental impacts of different sources of renewable energy. One of the pillars of the project is the Wind Energy Pilot, addressing the effects of offshore wind parks on air pollution and energy use. The methods used in the pilot and the underlying environmental databases are integrated into a WebGIS client tool and made available to the public. This paper is dedicated to describing the environmental databases and supporting data incorporated in the client tool. A 27-km resolution, 11-year wind database is created using the WRF model. The wind database is used to assess the wind climate in the north-west Atlantic region and to derive the potential power output from offshore wind parks. Auxiliary data concerning water depth, distance to shore and distance to the nearest suitable port are created to aid the planning and maintenance phases. Seasonal workability conditions are assessed using a 20-year wave database. The distance at which future wind parks should be placed to exhibit different wind climates is investigated. (orig.)

Regulatory capture by default: Offshore exploratory drilling for oil and gas

International Nuclear Information System (INIS)

Portman, Michelle E.

2014-01-01

This article examines a form of regulatory capture that occurs when significant ambiguity exists regarding the environmental protection standards for new types of activities in the marine environment. To begin with, there is little research that categorizes the typologies of regulatory capture despite the ubiquity of the phenomenon. After a discussion of theoretical approaches to regulatory capture, I describe the operative definition and theory appropriate to the situation related to authorization of oil and natural gas production in Israel following the discovery of large offshore reserves in 2010. This approach, embodying several facets of existing typologies, is applied to decisions made authorizing construction of the Gabriella offshore exploratory drilling platform. The analysis highlights the nature of capture in the absence of clear agency jurisdiction over new activities located in offshore environs organized as temporal and spatial “vacuums”. I conclude that comprehensive marine spatial planning would result in less capture and the development of more capture-resistant regulations. - Highlights: • Regulatory capture occurs when ambiguity exists about environmental protection standards for new types of activities in the marine environment. • A typology is developed from theories of regulatory capture (RC) and applied to cases of offshore exploratory drilling. • The typology is applied to offshore natural gas reserves discovered in 2010 offshore of Israel in the Mediterranean Sea. • Temporal aspects (anachronistic laws and regulations) and spatial aspects (jurisdictional ambiguity) have created regulatory vacuums leading to RC. • Comprehensive marine spatial planning would result in less capture and the development of more capture-resistant regulations

Screening Criteria and Considerations of Offshore Enhanced Oil Recovery

Directory of Open Access Journals (Sweden)

Pan-Sang Kang

2016-01-01

Full Text Available The application of enhanced oil recovery (EOR in offshore oil fields has received significant attention due to the potentially enormous amount of recoverable oil. However, EOR application offshore is in its very early stage due to conditions that are more complex than onshore oil fields, owing to the unique parameters present offshore. Therefore, successful EOR applications in offshore oil fields require different screening criteria than those for conventional onshore applications. A comprehensive database for onshore applications of EOR processes together with a limited offshore EOR application database are analyzed in this paper, and the important parameters for successful offshore application are incorporated into the new EOR screening criteria. In this paper, screening criteria to determine acceptable EOR processes for offshore fields, including hydrocarbon gas miscible, CO2 miscible, and polymer processes, are presented. Suggested screening criteria for these EOR processes comprise quantitative boundaries and qualitative considerations. Quantitative screening criteria are predominantly based on quantifiable data, such as oil and reservoir properties. Qualitative screening considerations mainly focus on the operational issues present offshore, including platform space constraints, limited disposal options, injectant availability, and flow assurance matters (including hydrate formation and difficulties in emulsion separation.

Growth and demise of a Paleogene isolated carbonate platform of the Offshore Indus Basin, Pakistan: effects of regional and local controlling factors

Science.gov (United States)

Shahzad, Khurram; Betzler, Christian; Ahmed, Nadeem; Qayyum, Farrukh; Spezzaferri, Silvia; Qadir, Anwar

2018-03-01

Based on high-resolution seismic and well datasets, this paper examines the evolution and drowning history of a Paleocene-Eocene carbonate platform in the Offshore Indus Basin of Pakistan. This study uses the internal seismic architecture, well log data as well as the microfauna to reconstruct factors that governed the carbonate platform growth and demise. Carbonates dominated by larger benthic foraminifera assemblages permit constraining the ages of the major evolutionary steps and show that the depositional environment was tropical within oligotrophic conditions. With the aid of seismic stratigraphy, the carbonate platform edifice is resolved into seven seismic units which in turn are grouped into three packages that reflect its evolution from platform initiation, aggradation with escarpment formation and platform drowning. The carbonate factory initiated as mounds and patches on a Cretaceous-Paleocene volcanic complex. Further, the growth history of the platform includes distinct phases of intraplatform progradation, aggradation, backstepping and partial drownings. The youngest succession as late-stage buildup records a shift from benthic to pelagic deposition and marks the final drowning in the Early Eocene. The depositional trend of the platform, controlled by the continuing thermal subsidence associated with the cooling of volcanic margin lithosphere, was the major contributor of the accommodation space which supported the vertical accumulation of shallow water carbonate succession. Other factors such as eustatic changes and changes in the carbonate producers as a response to the Paleogene climatic perturbations played secondary roles in the development and drowning of these buildups.

Platform intermediation in a market for differentiated products

NARCIS (Netherlands)

Galeotti, Andrea; Moraga-González, José Luis

We study a two-sided market where a platform attracts firms selling differentiated products and buyers interested in those products. In the subgame perfect equilibrium of the game, the platform fully internalises the network externalities present in the market and firms and consumers all participate

Industrial opportunities - offshore

International Nuclear Information System (INIS)

Gerrits, D.J.

1998-01-01

Industrial opportunities available in the Canadian offshore petroleum industry are discussed. Oil has been produced offshore from Nova Scotia since 1992, and offshore from Newfoundland since 1997. Special needs that must be addressed in offshore operations in eastern Canada such as the cold North Atlantic environment, isolation, logistics, safety, and quality assurance, are examined. The most obvious opportunities lie with the designing, building and installing the facilities needed to extract oil and gas from beneath the sea floor and transport it to market. However, there are also opportunities in designing and fabricating clothing, customized food containers and other equipment for offshore needs. Short term opportunities also exist in the decommissioning of depleted production fields and their facilities. One of the greatest obstacles facing new entrants into the offshore oil and gas industry is the lack of a track record. To meet this challenge, the ability to seek out partners to pursue local and international opportunities through joint ventures, strategic alliances and technology sharing partnering arrangements is of great importance. It may be the difference between success and failure. 6 figs

Implementing Product Platforms: A Case Study

DEFF Research Database (Denmark)

Nielsen, Ole Fiil; Mortensen, Niels Henrik

2006-01-01

The paper describes a case study dealing with the process of creating and implementing a product platform. The paper espessially deals with the fact that to obtain the benefits of platforms a permanent change in behaviour in product development must be ensured. This change in behaviour requires...... acceptance and approval from the organisation in general and the commitment from management to enforce agreed-upon decisions. The case study itself was performed in the Danish company LEGO Group. The case study had two objectives: To create a technical architecture and align this architecture...

Radioisotope techniques for process optimisation and control in the offshore oil and gas industries

International Nuclear Information System (INIS)

Charlton, J.S.

2002-01-01

For over fifty years, radioisotope technology has been used by the oil industry to solve problems and to help optimise process operations. The widespread development of offshore oil and gas fields has brought, and continues to bring, new challenges and, in response, new or modified applications of radioisotope technology have been introduced. This paper presents case studies, which illustrate the use of radioisotopes, both in the sub-sea environment and on the offshore production platforms. On the platform, radioisotope techniques applied singly or in combination, have been applied to the performance assessment of oil/gas separation and gas dehydration units. Novel nucleonic instrumentation has been developed for the control of three-phase separators. Sub-sea, radioactive tracers and/or sealed sources have been used to investigate the integrity of submerged structures and to troubleshoot pipeline problems. The continuing expansion in the use of this technology stems from industry increasing awareness of its versatility and from the fact that the benefits it confers can be obtained at a relatively modest cost. Examples of economic benefit described in the paper are associated with production enhancements derived from the ability of radioisotope technology to measure performance and diagnose problems on line, without disrupting process operations in any way. (Author)

A QFD-based optimization method for a scalable product platform

Science.gov (United States)

Luo, Xinggang; Tang, Jiafu; Kwong, C. K.

2010-02-01

In order to incorporate the customer into the early phase of the product development cycle and to better satisfy customers' requirements, this article adopts quality function deployment (QFD) for optimal design of a scalable product platform. A five-step QFD-based method is proposed to determine the optimal values for platform engineering characteristics (ECs) and non-platform ECs of the products within a product family. First of all, the houses of quality (HoQs) for all product variants are developed and a QFD-based optimization approach is used to determine the optimal ECs for each product variant. Sensitivity analysis is performed for each EC with respect to overall customer satisfaction (OCS). Based on the obtained sensitivity indices of ECs, a mathematical model is established to simultaneously optimize the values of the platform and the non-platform ECs. Finally, by comparing and analysing the optimal solutions with different number of platform ECs, the ECs with which the worst OCS loss can be avoided are selected as platform ECs. An illustrative example is used to demonstrate the feasibility of this method. A comparison between the proposed method and a two-step approach is conducted on the example. The comparison shows that, as a kind of single-stage approach, the proposed method yields better average degree of customer satisfaction due to the simultaneous optimization of platform and non-platform ECs.

Design and analysis of liquefaction process for offshore associated gas resources

International Nuclear Information System (INIS)

Li, Q.Y.; Ju, Y.L.

2010-01-01

Liquefaction is the key section on floating platform. Some experts and designers selected mixed refrigerant process for floating platform, while some recommended expander cycle. However, few of them compared the two types of processes systemically before making a choice. In this paper, the liquefaction processes of propane pre-cooled mixed refrigerant cycle (C 3 /MRC), mixed refrigerant cycle (MRC) and nitrogen expander cycle (N 2 expander) for the special offshore associated gases in South China Sea have been designed and studied. These processes have been analyzed and compared systematically considering the main factors including the performance parameters, economic performance, layout, sensitivity to motion, suitability to different gas resources, safety and operability, accounting for the features of the floating production, storage and offloading unit for liquefied natural gas (LNG-FPSO) in marine environment. The results indicated that N 2 expander has higher energy consumption and poorer economic performance, while it has much more advantages than C 3 /MRC and MRC for offshore application because it is simpler and more compact and thus requiring less deck area, less sensitive to LNG-FPSO motion, has better suitability for other gas resources, has higher safety and is easier to operate. Therefore, N 2 expander is the most suitable offshore liquefaction process. In addition, the exergy analysis is conducted for N 2 expander and the results indicate that the compression equipments and after coolers, expanders and LNG heat exchangers are the main contribution to the total exergy losses. The measures to decrease the losses for these equipments are then discussed.

Offshore wind farms for hydrogen production subject to uncertainties

Energy Technology Data Exchange (ETDEWEB)

Kassem, Nabil [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Energy Processes

2002-07-01

Wind power is a source of clean, nonpolluting electricity, which is fully competitive, if installed at favorable wind sites, with fossil fuel and nuclear power generation. Major technical growth has been in Europe, where government policies and high conventional energy costs favor the use of wind power. As part of its strategy, the EU-Commission has launched a target to increase the installed capacity of Wind power from 7 GWe, in 1998 to 40 GWe by year 2012. Wind power is an intermittent electricity generator, thus it does not provide electric power on an 'as needed' basis. Off-peak power generated from offshore wind farms can be utilized for hydrogen production using water electrolysis. Like electricity, hydrogen is a second energy carrier, which will pave the way for future sustainable energy systems. It is environmentally friendly, versatile, with great potentials in stationary and mobile power applications. Water electrolysis is a well-established technology, which depends on the availability of cheap electrical power. Offshore wind farms have longer lifetime due to lower mechanical fatigue loads, yet to be economic, they have to be of sizes greater than 150 MW using large turbines (> 1.5 MW). The major challenge in wind energy assessment is how accurately the wind speed and hence the error in wind energy can be predicted. Therefore, wind power is subject to a great deal of uncertainties, which should be accounted for in order to provide meaningful and reliable estimates of performance and economic figures-of-merit. Failure to account for uncertainties would result in deterministic estimates that tend to overstate performance and underestimate costs. This study uses methods of risk analysis to evaluate the simultaneous effect of multiple input uncertainties, and provide Life Cycle Assessment (LCA) of the-economic viability of offshore wind systems for hydrogen production subject to technical and economical uncertainties (Published in summary form only)

RAMSI management model and evaluation criteria for Nordic offshore wind asset

Energy Technology Data Exchange (ETDEWEB)

Tiusanen, R.; Jaennes, J. [VTT Technical Research Centre of Finland, Espoo (Finland); Liyanage, J. P. [Univ. of Stavanger, Center for Industrial Asset Management (Norway)

2012-07-01

The offshore wind energy sector is in the early stages of development, but it is growing fast. Due to the European Union's renewable-energy and climate goals along with national legislation, the offshore wind sector will develop strongly over the coming years in Europe. In the offshore wind energy sector, there are many different wind-turbine designs ranging from traditional mono pile structures to floating platforms, depending on the water depth. Today, most offshore turbines are based on onshore turbine designs, and turbine technology continues to develop incrementally. At the same time, there is strong demand in the market for new, innovative designs for offshore wind turbines whose main focus is reliability and cost efficiency. For floating offshore wind turbine designs, there may be new types of uncertainty and system risks compared with onshore wind turbines. Wind turbines in cold climates, such as those experienced in the Nordic countries, may be exposed to extreme conditions, such as formation of ice or very low temperatures that are outside the design limits of standard wind turbines. In the offshore wind energy sector, specification, implementation and verification of the so-called R&M's (Reliability, Availability, Maintainability, Safety and Inspect ability) requirements during development work are important for companies delivering wind turbines, from the perspective of system integrity. Decisions made before the formal design phase strongly determine the costs and benefits gained during the whole life cycle of a wind turbine. The benefits of implementing the R&M's program include support with investment decisions, cost management, improved management of resource requirements, systematic support with development and implementation of products, and integration of dependability and safety requirements. This publication outlines a model for managing R&M's factors during the conceptual design phase of an offshore wind turbine. The model

Conference on offshore wind power in France and Germany

International Nuclear Information System (INIS)

Meyer, Ronny; Furois, Timothee; Nolte, Nico; Lanoe, Frederic; Lehmann-Matthaei, Bjoern; Ifflaender, Andree; Courcambeck, Alexandre; Giese, Norbert; Kavafyan, Philippe; Bjaert, Niels; Wagner, Andreas; Guillet, Jerome

2014-01-01

The French-German office for Renewable energies (OFAEnR) organised a conference on offshore wind power in France and Germany. In the framework of this French-German exchange of experience, about 120 participants exchanged views on the planning and authorisation procedures implemented in both countries and on the installation, connection to the grid and maintenance of offshore wind turbines. environmental impacts and usage conflicts linked with offshore wind farms exploitation were addressed as well. This document brings together the available presentations (slides) made during this event: 1 - Update: Offshore Wind In Germany (Ronny Meyer); 2 - Offshore wind development in France (Timothee Furois); 3 - The Licensing Procedure for Offshore Wind Farms in the German EEZ (Nico Nolte); 4 - Spatial Planning and Permitting in France: What leverage for more efficiency? (Frederic Lanoe); 5 - Results of 10 years environmental research on FINO-platforms (Bjoern Lehmann-Matthaei); 6 - Offshore Grid Connection - Status Quo and Overview (Andree Ifflaender); 7 - Grid connection of Offshore Wind in France: Situation, perspectives and recommendations (Alexandre Courcambeck); 8 - Controlling risks and warranting safety: Best practices for the installation, exploitation and maintenance of offshore wind turbines (Norbert Giese); 9 - Offshore wind Bremerhaven experience: An essential asset for the development of a complete Wind Offshore industry in France (Philippe Kavafyan); 10 - Standardizing and Cost Reduction -Lessons Learned from London Array (Niels Bjaert); 11 - Offshore Wind energy in Germany: System Benefits and Cost Reduction Potentials. Presentation of study results from prognos/fichtner and Fraunhofer-IWeS (Andreas Wagner); 12 - Offshore Wind energy financing - opportunities and risks (Jerome Guillet)

Reliability of offshore wind power production under extreme wind conditions. Deliverable D 9.5. Work Package 9: Electrical grid

DEFF Research Database (Denmark)

Cutululis, Nicolaos Antonio; Zeni, Lorenzo

years, with each year simulated with five random seeds, leading to a total of 25 annual wind power time series for six large offshore wind farms, summing up to a little over 330 wind turbines. Two storm control strategies were used. The analysis involved several aspects inspired from reliability studies....... The aspects investigated are storm events occurrences and durations, storm control strategy impact on the capacity factor (lost production), the loss of production (power produced from wind drops below a certain threshold due to high wind speeds and storm controller) and finally, the wind power production......Reliability of offshore wind production under extreme wind conditions was investigated in this report. The wind power variability from existing and future large offshore wind farms in Western Denmark were simulated using the Correlated Wind model developed at Risø. The analysis was done for five...

Determination of current loads of floating platform for special purposes

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

2017-08-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. The environmental load calculation of the platform is an important part of the research of the ocean platform, which has always been paid attention to by engineers. In addition to wave loads, the wind loads and current loads are also important environmental factors that affect the dynamic response of the offshore platform. The current loads on the bottom structure should not be ignored. By Fluent software, the hydrostatic conditions and external current loads of the platform were calculated in this paper. The coefficient which is independent of the current velocity, namely, current force coefficient, can be fitted through current loads, which can be used for the consequent hydrodynamic and mooring analyses.

Collaborative Development Planning Model of Supporting Product in Platform Innovation Ecosystem

Directory of Open Access Journals (Sweden)

Wei Zhang

2014-01-01

Full Text Available In order to improve the market value of the product, the platform enterprise often participates in the development process of supporting product of emerging industry’s platform innovation ecosystem. This paper puts forward a revenue sharing contract between the platform company and the supporting company by creating a collaborative development model of the supporting product in the ecosystem, and this paper studies the platform enterprise investment resource property's (complementary or substitution impact on the supporting enterprise R&D efforts and the revenue sharing factor and analyzes collaborative development mechanism of supporting product of emerging industry platform innovation ecosystem. The research indicates that when platform enterprise and supporting enterprise's resources are complementary, the supporting enterprise R&D effort level and revenue sharing coefficient increase as the platform company’s investment increases. When platform enterprise and supporting enterprise's resources are substitutive, the supporting enterprise’s R&D effort level and revenue sharing coefficient decrease as the platform company’s investment increases.

Three Essays in the Public Economics of Offshore Hydrocarbon Investment and Production

Science.gov (United States)

Kearney, Owen P.

Offshore sources, in both shallow and deep waters, are increasingly important contributors to global oil and natural gas production. As both resource owner and taxing authority, national governments play an important role in the production of these offshore hydrocarbons. How the policy choices of these governments affect firm behavior, however, is not necessarily well understood. This dissertation contributes to our knowledge of how public policy influences offshore hydrocarbon investment and production. In the first essay, I estimate the investment responses of hydrocarbon producers to the suspension of the royalty, a type of production tax levied on production from federal lands. I find that the potential for a royalty payments waiver: (1) increases the probability that an individual tract is acquired by an average of 193% (a mean increase of 5.6 percentage points); (2) decreases the probability that a lease is ever drilled during its observed lease term by an average of 14.5% (a mean decrease of 1.3 percentage points); and (3) increases the expected number of explored leases by 150%. The introduction of DWRRA also increases the average winning bid per lease by 60%. These estimates quantify the magnitudes of the discouraging effects of production taxation on oil and natural gas investment. In the second essay, I quantify the implied value of information spillovers in oil and natural gas exploration using an event study design. I find that 25 trading days after a discovery, firms that own leases adjacent to the discovery lease (but not the discovery lease, itself) realize an average abnormal return translating to 315 million in market capitalization. This effect is quantitatively large compared to costs for drilling an exploratory well. In the final essay, I measure how oil price affects water injection, a method for prolonging the productive lifetime of oil fields. I find that a 1 rise in price increases the water injected into the well's reservoir by

RADIATION DOSE AND RISK TO RECREATIONAL FISHERMEN FROM INGESTION OF FISH CAUGHT NEAR EIGHT OIL PLATFORMS IN THE GULF OF MEXICO

Energy Technology Data Exchange (ETDEWEB)

MEINHOLD,A.F.; HOLTZMAN,S.

1998-06-01

Offshore production of oil and gas is accompanied by a saline wastewater, called produced water. Produced water discharges to the Gulf of Mexico often contain elevated concentrations of radionuclides that occur naturally in the geologic reservoir along with the oil and gas. These radionuclides may accumulate in organisms that live near offshore oil and gas structures. Because recreational fishing in the Gulf of Mexico is concentrated near oil and gas platforms, there is the potential for increased risks to recreational fishermen from the ingestion of radionuclides in fish caught near produced water discharges. This analysis investigated the potential risk to recreational fishermen from radium and lead-210 in offshore produced water discharges to the Gulf of Mexico. The assessment used data collected at eight discharging offshore platforms and two reference locations. These data were collected in a USDOE funded project titled ``Environmental and Economic Assessment of Discharges from Gulf of Mexico Region Oil and Gas Operations'', here called the USDOE Field Study. The risk assessments were done to support risk managers in developing regulations and permits for offshore discharges of produced water.

Assessment of economic impact of offshore and coastal discharge requirements on present and future operations in the Gulf of Mexico. Final report

International Nuclear Information System (INIS)

Lindsey, R.

1996-06-01

The high potential costs of compliance associated with new effluent guidelines for offshore and coastal oil and gas operations could significantly affect the economics of finding, developing, and producing oil and gas in the Gulf of Mexico. This report characterizes the potential economic impacts of alternative treatment and discharge regulations for produced water on reserves and production in Gulf of Mexico coastal, territorial and outer continental shelf (OCS) waters, quantifying the impacts of both recent regulatory changes and possible more stringent requirements. The treatment technologies capable of meeting these requirements are characterized in terms of cost, performance, and applicability to coastal and offshore situations. As part of this analysis, an extensive database was constructed that includes oil and gas production forecasts by field, data on existing platforms, and the current treatment methods in place for produced water treatment and disposal on offshore facilities. This work provides the first comprehensive evaluation of the impacts of alternative regulatory requirements for produced water management and disposal in coastal and offshore areas of the Gulf of Mexico

Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

Science.gov (United States)

Song, Young-Joo; Woo, Jong-Hun; Shin, Jong-Gye

2011-09-01

Recently, the speed of change related with enterprise management is getting faster than ever owing to the competition among companies, technique diffusion, shortening of product lifecycle, excessive supply of market. For the example, the compliance condition (such as delivery date, product quality, etc.) from the ship owner is getting complicated and the needs for the new product such as FPSO, FSRU are coming to fore. This paradigm shift emphasize the rapid response rather than the competitive price, flexibility and agility rather than effective and optimal perspective for the domestic shipbuilding company. So, domestic shipbuilding companies have to secure agile and flexible ship production environment that could respond change of market and requirements of customers in order to continue a competitive edge in the world market. In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

Exergetic assessment of energy systems on North Sea oil and gas platforms

International Nuclear Information System (INIS)

Nguyen, Tuong-Van; Pierobon, Leonardo; Elmegaard, Brian; Haglind, Fredrik; Breuhaus, Peter; Voldsund, Mari

2013-01-01

Oil and gas platforms in the North Sea region are associated with high power consumption and large CO 2 -emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus ® , Dynamic Network Analysis and Aspen HYSYS ® . 62–65% of the total exergy destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35–38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high-temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. - Highlights: • North Sea oil and gas platforms are investigated and a generic model is developed. • Exergy analysis of these offshore facilities is performed. • Most of the total exergy destruction is attributable to the utility systems producing the electrical power required onsite. • Rejection of the exhaust gases from the utility systems is the major exergy loss of this system. • The highest thermodynamic performance is reached with low well-fluid content of water and gas

Exergetic assessment of energy systems on North Sea oil and gas platforms

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Tuong-Van [Section of Thermal Energy, Department of Mechanical Engineering, Technical University of Denmark, Building 403, Nils Koppels Allé, 2800 Kongens Lyngby (Denmark); Pierobon, Leonardo; Elmegaard, Brian; Haglind, Fredrik [Section of Thermal Energy, Department of Mechanical Engineering, Technical University of Denmark, Building 403, Nils Koppels Allé, 2800 Kongens Lyngby (Denmark); Breuhaus, Peter [Department of Energy, International Research Institute of Stavanger, Professor Olav Hanssens vei 15, 4021 Stavanger (Norway); Voldsund, Mari [Department of Chemistry, Norwegian University of Science and Technology, Høgskoleringen 5, 7491 Trondheim (Norway)

2013-12-01

Oil and gas platforms in the North Sea region are associated with high power consumption and large CO{sub 2}-emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus{sup ®}, Dynamic Network Analysis and Aspen HYSYS{sup ®}. 62–65% of the total exergy destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35–38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high-temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. - Highlights: • North Sea oil and gas platforms are investigated and a generic model is developed. • Exergy analysis of these offshore facilities is performed. • Most of the total exergy destruction is attributable to the utility systems producing the electrical power required onsite. • Rejection of the exhaust gases from the utility systems is the major exergy loss of this system. • The highest thermodynamic performance is reached with low well-fluid content of water and gas.

OTEC Cold Water Pipe-Platform Subsystem Dynamic Interaction Validation

Energy Technology Data Exchange (ETDEWEB)

Varley, Robert [Lockheed Martin Corporation, Manassas, VA (United States); Halkyard, John [John Halkyard and Associates, Houston, TX (United States); Johnson, Peter [BMT Scientific Marine Services, Inc., Houston, TX (United States); Shi, Shan [Houston Offshore Engineering, Houston, TX (United States); Marinho, Thiago [Federal Univ. of Rio de Janeiro (Brazil). LabOceano

2014-05-09

A commercial floating 100-megawatt (MW) ocean thermal energy conversion (OTEC) power plant will require a cold water pipe (CWP) with a diameter of 10-meter (m) and length of up to 1,000 m. The mass of the cold water pipe, including entrained water, can exceed the mass of the platform supporting it. The offshore industry uses software-modeling tools to develop platform and riser (pipe) designs to survive the offshore environment. These tools are typically validated by scale model tests in facilities able to replicate real at-sea meteorological and ocean (metocean) conditions to provide the understanding and confidence to proceed to final design and full-scale fabrication. However, today’s offshore platforms (similar to and usually larger than those needed for OTEC applications) incorporate risers (or pipes) with diameters well under one meter. Secondly, the preferred construction method for large diameter OTEC CWPs is the use of composite materials, primarily a form of fiber-reinforced plastic (FRP). The use of these material results in relatively low pipe stiffness and large strains compared to steel construction. These factors suggest the need for further validation of offshore industry software tools. The purpose of this project was to validate the ability to model numerically the dynamic interaction between a large cold water-filled fiberglass pipe and a floating OTEC platform excited by metocean weather conditions using measurements from a scale model tested in an ocean basin test facility.

Microcomputers take over in off-shore process

Energy Technology Data Exchange (ETDEWEB)

Claricoates, J

1978-10-01

The special capabilities and adaptability of microcomputers are typically demonstrated by the use of them on Mobil Exploration, Norway, Inc.'s Statfjord A Condeep platform. One of the unique features of offshore oil production is that so many different operations are conducted in a very confined space. On Statfjord A drilling, production, storage of crude oil, gas compression for sale or reinjection, custody transfer, generation and distribution of a significant amount of electric power, a hotel facility, and flight operations, all have to be accommodated and controlled. Superimposed on these are comprehensive fire detection and shutdown systems. In such a highly complex, densely packed, and highly interactive environment, a supervisory control and data acquisition system (SCADA) by providing coordinated and easily read displays, better records for alarm analysis, and possibly suggesting corrective action when a fault does occur, is an essential aid to an operator, whose decisions must always by correct.

Assessments of high-consequence platforms: Issues and applications

International Nuclear Information System (INIS)

Digre, K.A.; Craig, M.J.K.

1994-01-01

An API task group has developed a process for the assessment of existing platforms to determine their fitness for purpose. This has been released as a draft supplement to API RP 2A-WSD, 20th edition. Details and the background of this work are described in a companion paper. The assessment of a platform's fitness for purpose involves firstly a definition of the platform's exposure; and secondly, an evaluation of the platform's predicted performance relative to the assessment criteria associated with that exposure. This paper deals with platforms in the high exposure category. That is, platforms whose potential failure consequences, in terms of potential life loss and environmental damage, are significant. The criteria for placement of a platform in a high exposure category are explained, as are the performance criteria demanded of these high exposure platforms. In the companion paper, the metocean assessment process and associated API-developed acceptance criteria are highlighted. This paper addresses primarily ice and seismic loading assessments and associated API-developed criteria, which are based on over thirty years of successful offshore operation and field experience, as well as extrapolation of land-based performance criteria. Three West Coast, USA production platforms are used for illustration

Multi-layered satisficing decision making in oil and gas production platforms

DEFF Research Database (Denmark)

Lindegaard Mikkelsen, Lars; Demazeau, Yves; Jørgensen, B. N.

2013-01-01

From a control perspective, offshore oil and gas production is very challenging due to the many and potentially conflicting production objectives that arise from the intrinsic complexity of the oil and gas domain. In this paper, we show how a multi-layered multi-agent system can be used to implem...

Effect of Second-Order Hydrodynamics on a Floating Offshore Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

Roald, L.; Jonkman, J.; Robertson, A.

2014-05-01

The design of offshore floating wind turbines uses design codes that can simulate the entire coupled system behavior. At the present, most codes include only first-order hydrodynamics, which induce forces and motions varying with the same frequency as the incident waves. Effects due to second- and higher-order hydrodynamics are often ignored in the offshore industry, because the forces induced typically are smaller than the first-order forces. In this report, first- and second-order hydrodynamic analysis used in the offshore oil and gas industry is applied to two different wind turbine concepts--a spar and a tension leg platform.

Offshore wind energy. An overview on the activities in Germany; Offshore-Windenergie. Ein Ueberblick ueber die Aktivitaeten in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Worm, Anja [media consulta Deutschland GmbH, Berlin (Germany)

2013-02-15

The brochure under consideration provides an overview of the activities of offshore wind energy in Germany. The first offshore wind farms are built and generate more electricity than expected. The offshore wind farms serve as a field of learning for new technologies. The power of offshore wind farms opened new prospects for the economy. The northern Federal States of Germany as well as the traditional locations for mechanical engineering and steel production benefit from offshore wind energy.

Vertical Wave Impacts on Offshore Wind Turbine Inspection Platforms

DEFF Research Database (Denmark)

Bredmose, Henrik; Jacobsen, Niels Gjøl

2011-01-01

Breaking wave impacts on a monopile at 20 m depth are computed with a VOF (Volume Of Fluid) method. The impacting waves are generated by the second-order focused wave group technique, to obtain waves that break at the position of the monopile. The subsequent impact from the vertical run-up flow...... on a horizontal inspection platform is computed for five different platform levels. The computational results show details of monopile impact such as slamming pressures from the overturning wave front and the formation of run-up flow. The results show that vertical platform impacts can occur at 20 m water depth....... The dependence of the vertical platform load to the platform level is discussed. Attention is given to the significant downward force that occur after the upward force associated with the vertical impact. The effect of the numerical resolution on the results is assessed. The position of wave overturning is found...

Investment in exploration-production and refining 2014

International Nuclear Information System (INIS)

Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio; Maisonnier, Guy

2014-11-01

IFPEN analyses in this study the 2014 evolution of global investment in the field of exploration-production and refining: 1 - Changes in oil and gas prices: General background: weak economy and global disorder, Oil prices: fundamentals that could help to relax oil prices?, Gas prices: fall in Europe, stability in Japan, increase in the US; 2 - Exploration and production - Slowdown in growth: moderate rise in investment in 2014, exploration - Discoveries in 2014, Russia: sanctions will have limited short term impact, implications of the reforms to the Mexican energy sector; 3 - Drilling activity and market throughout the world: onshore and offshore drilling (Number of wells drilled throughout the world, Number of onshore wells, Number of offshore wells, Drilling, equipment and well services markets, Onshore drilling market, Offshore drilling market, Fracking market), Geophysical activity and the geophysical market, Offshore construction activity and the offshore construction market (Offshore construction activities, Rig construction activity, Floating Platform Systems (FPS), Sub-sea constructions, Offshore construction market); 4 - Refining - Significant increase in spending: increase in industrial costs, a slowdown in the increase in excess capacity in the future?, A bleak future for the european refining sector

Operation and maintenance costs of offshore wind farms and potential multi-use platforms in the Dutch North Sea

NARCIS (Netherlands)

Rockmann, C.; Lagerveld, S.; Stavenuiter, J.

2017-01-01

Aquaculture within offshore wind farms has been identified as one of the many possibilities of smart use of marine space, leading to opportunities for innovative entrepreneurship. Offshore areas potentially pose less conflict with co-users than onshore. At the same time, offshore areas and offshore

Device for retaining oil gushing out in an uncontrolled fashion from offshore platforms. [German patent

Energy Technology Data Exchange (ETDEWEB)

Hambrock, H J

1978-11-23

The spread of oil which emerges on a water surface in case of a fault is to be prevented and its removal is to be made possible by a sort of floating fence. This type of oil barrier is formed by a blown up, floating hose on the water surface which may be filled with plastic foam. It surrounds the centrally placed possible place of emergence of the oil in a circle, this may be an offshore platform or a stationary tanker. The concentric position is ensured by radially tensioned ropes. The protective ring can normally be pulled in (above all during bad weather) and need only be expanded for a short time in case of a fault. In order to prevent oil collected inside the protective ring being washed under or over it by the wind or waves, a circular attachment in the form of a collar can be blown up in the upward direction, and a similar apron hanging downwards loaded with weights may be provided.

A system for use in offshore petroleum production; System for anvendelse ved offshore petroleumsproduksjon

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Mjoeen, S.A.; Smedal, A.; Syvertsen, K.

1994-10-31

The invention relates to a system for use in offshore oil and gas production from production wells on the sea bed. The system comprises a submerged buoy having an outer buoyancy member which is arranged for introduction and releasable fastening in a submerged, downwardly open receiving space in a vessel, and a central member which is rotatably mounted in the outer member and is anchored to the sea bed and is connected to at least one transfer line extending from a respective production well up to the buoy, a shaft extending between the receiving space and the deck of the vessel. The system comprises a swivel unit which is installed at the lower end of the shaft so that it is limitedly raisable and lowerable, and which is connected to a tube system on the vessel, the swivel unit comprising inner and outer mutually rotatable swivel members and at its underside is provided with a number of coupling heads for interconnection with corresponding connectors arranged at the upper ends of the topical number of transfer lines, these lines at their upper end being suspended at the upper end of the central member of the buoy. 6 figs.

A system for use in offshore petroleum production; System for anvendelse ved offshore petroleumsproduksjon

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.G.; Mjoeen, S.A.; Smedal, A.; Syvertsen, K.

1997-07-08

The invention concerns a system for use in offshore oil and gas production from production wells on the sea bed. The system comprises a submerged buoy having an outer buoyancy member which is arranged for introduction and releasable fastening in a submerged, downwardly open receiving space in a vessel, and a central member which is rotatory mounted in the outer member and is anchored to the sea bed and is connected to at least one transfer line extending from a respective production well up to the buoy, and a shaft extending between the receiving space and the deck of the vessel. The system includes a swivel unit which is installed at the lower end of the shaft so that it is limitedly raising and lowering, and which is connected to a tube system on the vessel. The swivel unit comprises inner and outer mutually rotatable swivel members and at its underside is provided with a number of coupling heads for interconnection with corresponding connectors arranged at the upper ends of the topical number of transfer lines. These lines are suspended at the upper end of the central member of the buoy. 6 figs.

Soil non-linearity and its effect on the dynamic behaviour of offshore platform foundations

Energy Technology Data Exchange (ETDEWEB)

Madshus, Christian

1997-07-01

This thesis focuses on non-linear soil response to the type of cyclic loading experienced under offshore gravity base platform foundations. These loads are dominated by a cyclic component around the main wave frequency, which may well mobilize soil non-linearity under severe sea-states. Superimposed on this main component are lower level higher frequency loads caused by resonant oscillations of the platform. The thesis presents results of specially designed triaxial tests to simulate this loading condition. The tests simultaneously applied two cyclic load components at different frequencies and amplitudes. The measured soil response to each component has been isolated through a frequency domain separation. It was found that the soil responds to the superimposed high frequency low level component as if the soil had a cyclically time-varying stiffness. If the superimposed component does not lead to load reversals, this stiffness variation is controlled by the frequency and amplitude of the main load component and by the hysteretic non-linearity of the soil. If the superimposed component causes reversals, the influence of the hysteretic non-linearity on the stiffness variation is reduced. The higher the degree of reversal, the more this influence it taken over by the variation in the instantaneous unloading-reloading stiffness of the soil. It was also found that this type of two-frequency cyclic soil testing is generally superior over conventional single-frequency testing in the way it enforces the soil to reveal several of its inherent properties not deducible from ordinary tests. Benefits of analyzing non-linear response in the frequency domain is demonstrated throughout this thesis. The ability of various theoretical soil models to simulate the observed soil behaviour under two-frequency cyclic loading has, been investigated through numerical analyses. It was found that only those models that are based on kinematic hardening are able to reproduce what was observed

Do Offshore Wind Farms Influence Marine Primary Production?

Science.gov (United States)

Tweddle, J. F.; Murray, R. B. O.; Gubbins, M.; Scott, B. E.

2016-02-01

Primary producers (phytoplankton) form the basis of marine food-webs, supporting production of higher trophic levels, and act as a sink of CO2. We considered the impact of proposed large scale offshore wind farms in moderately deep waters (> 45 m) off the east coast of Scotland on rates of primary production. A 2 stage modelling process was used, employing state-of-the-art 3-D hydrographic models with the ability to capture flow at the spatial resolution of 10 m combined with 1-D vertical modelling using 7 years of local forcing data. Through influencing the strength of stratification via changes in current flow, large (100 m) modelled wind turbine foundations had a significant effect on primary producers, consistently reducing total annual primary production, although within the range of natural interannual variability. The percentage reduction was largest over submarine banks less than 54 m in depth, and was outside the range of natural interannual variability. Smaller (10 m) turbine foundations had no discernible effect on total annual primary production. The results indicate that smaller foundations should be favored as a mitigation measure, in terms of effects on primary production, and this type of analysis should be considered within sectoral planning and licensing processes for future renewable energy developments.

Four new bass strait platforms -a project manager's view

Energy Technology Data Exchange (ETDEWEB)

Power, J.W.

1982-05-01

The offshore development by Esso/BHP of the West Kingfish, Cobia, Fortescue and Flounder oil fields in the Gippsland Basin is one of the significant undertakings by the petroleum industry during the 1980s. Production from the fields will help sustain the current level of production from Bass Strait into the latter part of this decade. This paper examines some of the principal project management issues and actions involved in the planning and execution of the design and construction phases of the platforms and pipelines associated with each of these fields.

CFD for wind and tidal offshore turbines

CERN Document Server

Montlaur, Adeline

2015-01-01

The book encompasses novel CFD techniques to compute offshore wind and tidal applications. Computational fluid dynamics (CFD) techniques are regarded as the main design tool to explore the new engineering challenges presented by offshore wind and tidal turbines for energy generation. The difficulty and costs of undertaking experimental tests in offshore environments have increased the interest in the field of CFD which is used to design appropriate turbines and blades, understand fluid flow physical phenomena associated with offshore environments, predict power production or characterise offshore environments, amongst other topics.

CO_2-mitigation options for the offshore oil and gas sector

International Nuclear Information System (INIS)

Nguyen, Tuong-Van; Tock, Laurence; Breuhaus, Peter; Maréchal, François; Elmegaard, Brian

2016-01-01

Highlights: • The possibilities for reducing offshore CO_2-emissions, by CO_2-capture, waste heat recovery and electrification are assessed. • Multi-objective optimisation, process modelling, economic and environmental analyses are used for evaluating system designs. • A reduction of more than 15% of the total CO_2-emissions can be achieved for the present case study. • High sensitivity of the avoidance costs to the natural gas price and CO_2-tax. - Abstract: The offshore extraction of oil and gas is an energy-intensive process leading to the production of CO_2 and methane, discharged into the atmosphere, and of chemicals, rejected into the sea. The taxation of these emissions, in Norway, has encouraged the development of more energy-efficient and environmental-friendly solutions, of which three are assessed in this paper: (i) the implementation of waste heat recovery, (ii) the installation of a CO_2-capture unit and (iii) the platform electrification. A North Sea platform is taken as case study, and these three options are modelled, analysed and compared, using thermodynamic, economic and environmental indicators. The results indicate the benefits of all these options, as the total CO_2-emissions can be reduced by more than 15% in all cases, while the avoidance costs vary widely and are highly sensitive to the natural gas price and CO_2-tax.

Platform driven development of product families : linking theory with practice

NARCIS (Netherlands)

Vuuren, van W.; Halman, J.I.M.

2001-01-01

Firms in most industries increasingly are considering platform-based approaches to reduce complexity and better leverage investments in product design, manufacturing and marketing. Literature addresses a variety of concepts related to platform thinking: component standardization, product

Not normally manned compression platforms for the North Sea

International Nuclear Information System (INIS)

Kumaran, K.S.

1994-01-01

Gas turbine driven gas compressors have been widely used on manned offshore facilities. Similarly unmanned gas turbine driven compressor stations have been in operation onshore with major gas transmission companies in Europe, North America and elsewhere. This paper summarizes a recent joint industry study to investigate the technical and economic feasibility of Not Normally Manned (NNM) Offshore Compression Facilities in terms of reliability, availability and maintainability. Classification of not normally manned (or unmanned) offshore facilities in the UK North Sea is in accordance with HSE Operations Notice 8. ON8 specifies criteria for offshore visits, visit hours and number of personnel on board for the operation of NNM platforms. This paper describes a typical Southern North Sea gas platform being considered for NNM compressor application. The conclusions from the study was that NNM compression is technically feasible with the facilities being able to provide an availability in excess of 98%. Life cycle costs were of the order of 70% of manned facilities thus significantly improving field development economics

Comparison of API & IEC Standards for Offshore Wind Turbine Applications in the U.S. Atlantic Ocean: Phase II; March 9, 2009 - September 9, 2009

Energy Technology Data Exchange (ETDEWEB)

Jha, A.; Dolan, D.; Gur, T.; Soyoz, S.; Alpdogan, C.

2013-01-01

This report compares two design guidelines for offshore wind turbines: Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platform Structures and the International Electrotechnical Commission 61400-3 Design Requirements for Offshore Wind Turbines.

Emissions from oil platforms in the North Sea

International Nuclear Information System (INIS)

Kanowski, S.

1991-01-01

When oil and gas are extracted from below the sea bed, emissions generally occur drilling and extraction and when offshore installations are abandoned. The sources of such emissions are the drilling fluids which contain many chemicals, cuttings, extracted hydrocarbons, substances released as a result of accidents, and the improper disposal of substances used in drilling and production. Platforms are regarded as land-based installations. Regulations to limit emissions have been put into effect within the scope of the Paris Convention on the protection of the North Sea and the North-East Atlantic. (orig.) [de

Challenges in Slug Modeling and Control for Offshore Oil and Gas Productions

DEFF Research Database (Denmark)

Pedersen, Simon; Løhndorf, Petar Durdevic; Yang, Zhenyu

2017-01-01

The upstream offshore multi-phase well-pipeline-riser installations are facing huge challenges related to slugging flow: An unstable flow regime where the flow rates, pressures and temperatures oscillate in the multi-phase pipelines. One typical severe slug is induced by vertical wells or risers...... most models require specific facility and operating data which, unfortunately, often is not available from most offshore installations. Anti-slug control have been investigated for several decades in oil & gas industry, but many of these existing methods suffer the consequent risk of simultaneously...... reducing the oil & gas production. This paper concludes that slug is a well defined phenomenon, but even though it has been investigated for several decades the current anti-slug control methods still have problems related to robustness. It is predicted that slug-induced challenges will be even more severe...

Marine and offshore pollution regulations for sanitary effluents discharge - 2010 scenario: MEPC.159(55); Legislacao ambiental para o descarte de efluentes sanitarios por navios e plataformas offshore - cenario 2010: MEPC.159(55)

Energy Technology Data Exchange (ETDEWEB)

Canale, Cristiane Lopes de Almeida; Arruda, Jose Eduardo; Miocque, Andre [VICEL, Rio das Ostras, RJ (Brazil)

2008-07-01

In response to the constant increase of the marine environment destruction, due to the exploration of its natural resources, several important international conventions have been edited since the years 60's aiming to improve the control of the pollution in the oceans. Annex IV of MARPOL 73/78 (The international Convention for the Prevention of Pollution from Ships) issued by the International Maritime Organization (IMO) entered in force in August 1st, 2005 establishing international rules for controlling the pollution caused by human sewage discharged from ships and offshore platforms. The rules established by IMO Resolutions go through constant improvements due to frequent innovations on technology, science and politics. Brazil as one of the MARPOL 73/78 Convention signatory countries, applies all the rules determined in this Convention through specific legislation. In October 2006 the IMO Marine Environment Protection Committee established the new resolution MEPC.159 (55) amending the parameters of sewage analysis and the performance tests for Sewage Treatment Units to be installed on board ships and offshore platforms from January 1st 2010, with the purpose to reduce the parameters of the pollution caused by human sewage discharge on board ships and offshore platforms. (author)

Reduction of Tribocorrosion Products When using the Platform-Switching Concept.

Science.gov (United States)

Alrabeah, G O; Knowles, J C; Petridis, H

2018-03-01

The reduced marginal bone loss observed when using the platform-switching concept may be the result of reduced amounts of tribocorrosion products released to the peri-implant tissues. Therefore, the purpose of this study was to compare the tribocorrosion product release from various platform-matched and platform-switched implant-abutment couplings under cyclic loading. Forty-eight titanium implants were coupled with pure titanium, gold alloy, cobalt-chrome alloy, and zirconia abutments forming either platform-switched or platform-matched groups ( n = 6). The specimens were subjected to cyclic occlusal forces in a wet acidic environment for 24 h followed by static aqueous immersion for 6 d. The amount of metal ions released was measured using inductively coupled plasma mass spectrometry. Microscopic evaluations were performed pre- and postimmersion under scanning electron microscope (SEM) equipped with energy-dispersive spectroscopy X-ray for corrosion assessment at the interface and wear particle characterization. All platform-switched groups showed less metal ion release compared with their platform-matched counterparts within each abutment material group ( P concept in the reduction of tribocorrosion products released from dental implants, which consequently may minimize the adverse tissue reactions that lead to peri-implant bone loss.

For the birds : suspected roastings prompt study of offshore flares

International Nuclear Information System (INIS)

Reid, W.

1999-01-01

A recent research project has revealed that offshore flares can pose a hazard to waterfowl. Two academic environmentalists from Memorial University and the Atlantic Co-operation Wildlife Ecology Research are working with Hibernia, PanCanadian Resources, Terra Nova and the Sable gas group to study the possibility of oil platforms having killed great numbers of birds. The objective is to study the potential problem and try to quantify the number of seabirds and what the impacts might be on the birds. The work involves observing waterfowl from oil platforms and supply vessels and taking a census of various species, the number of casualties and how they die. This project did not start because of any hard facts suggesting the offshore oil industry hurts the ecology of the Grand Banks. It stems from public concerns about Terra Nova, the next big project. 1 fig

An integrated design experience on a wet-tree production semisubmersible

Energy Technology Data Exchange (ETDEWEB)

Fales, Raymond P.; Lee, Craig; Chen Xiang; Zhengquan Zhou [ABB FPS Houston, TX (United States)

2004-07-01

The semisubmersible platform has been a reliable work platform for the offshore oil and gas industry for over 40 years. The Semisubmersible is a very mature concept with hundreds of examples in use. Traditionally during the design phase, the motions have been developed to suit the independent services, drilling, offshore operations or production. However, recently with the move to ultra-deep water depths and the use of Steel Catenary Risers (SCRs), the design of Semisubmersible has to be considered as an integrated floating production system, to satisfy all the requirements from platform global performance, SCRs strength and fatigue, mooring, topside payload and layout, hull strength, deck structure, marine system layout, stability, fabrication and installation. These requirements usually conflict each other. As such it is imperative to consider them together, adjusting the design parameters during design loops to obtain an optimal design product. This paper will describe the integrated design process used and the optimal design principles applied to satisfy these conflicting requirements and provide an example of a wet-tree production semisubmersible integrated design. Particular emphasis will be on global performance, SCR design, deck structure arrangement options, fabrication and integration. (author)

RBI Optimization of Offshore Wind Turbines

DEFF Research Database (Denmark)

Ramírez, José G. Rangel; Sørensen, John Dalsgaard

2009-01-01

methods for oil & gas installations, a framework for optimal inspection and maintenance planning of offshore wind turbines is presented. Special aspects for offshore wind turbines considered are the fatigue loading characteristics where usually the wind loading are dominating the wave loading, wake......Wind turbines for electricity production have increased significantly the last years both in production capability and size. This development is expected to continue also in the coming years. Offshore wind turbines with an electricity production of 5-10 MW are planned. Typically, the wind turbine...... support structure is a steel structure consisting of a tower and a monopile, tripod or jacket type foundation. This paper considers aspects of inspection and maintenance planning of fatigue prone details in jacket and tripod type of wind turbine support structures. Based on risk-based inspection planning...

Model Development and Loads Analysis of an Offshore Wind Turbine on a Tension Leg Platform with a Comparison to Other Floating Turbine Concepts: April 2009

Energy Technology Data Exchange (ETDEWEB)

Matha, D.

2010-02-01

This report presents results of the analysis of a 5-MW wind turbine located on a floating offshore tension leg platform (TLP) that was conducted using the fully coupled time-domain aero-hydro-servo-elastic design code FAST with AeroDyn and HydroDyn. The report also provides a description of the development process of the TLP model. The model has been verified via comparisons to frequency-domain calculations. Important differences have been identified between the frequency-domain and time-domain simulations, and have generated implications for the conceptual design process. An extensive loads and stability analysis for ultimate and fatigue loads according to the procedure of the IEC 61400-3 offshore wind turbine design standard was performed with the verified TLP model. This report compares the loads for the wind turbine on the TLP to those of an equivalent land-based turbine. Major instabilities for the TLP are identified and described.

Assessing offshore wind potential

International Nuclear Information System (INIS)

Adelaja, Adesoji; McKeown, Charles; Calnin, Benjamin; Hailu, Yohannes

2012-01-01

Quantifying wind potential is a pivotal initial step in developing and articulating a state’s policies and strategies for offshore wind industry development. This is particularly important in the Great Lakes States where lessons from other offshore environments are not directly applicable. This paper presents the framework developed for conducting a preliminary assessment of offshore wind potential. Information on lake bathymetry and wind resources were combined in simulating alternative scenarios of technically feasible turbine construction depths and distance concerns by stakeholders. These yielded estimates of developable offshore wind areas and potential power generation. While concerns about the visibility of turbines from shore reduce the power that can be generated, engineering solutions that increase the depths at which turbines can be sited increase such potential power output. This paper discusses the costs associated with technical limitations on depth and the social costs related to public sentiments about distance from the shoreline, as well as the possible tradeoffs. The results point to a very large untapped energy resource in the Michigan’s Great Lakes, large enough to prompt policy action from the state government. - Highlights: ▶ We build a theoretical framework for modeling offshore wind power production. ▶ Illustration of the impact of technology and social limitations on offshore wind energy development. ▶ Geospatial modeling of the offshore wind potential of the Great Lakes.

Floating Offshore Wind in Oregon: Potential for Jobs and Economic Impacts from Two Future Scenarios

Energy Technology Data Exchange (ETDEWEB)

Jimenez, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Speer, Bethany [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-05-01

Construction of the first offshore wind power plant in the United States began in 2015, off the coast of Rhode Island, using fixed platform structures that are appropriate for shallow seafloors, like those located off of the East Coast and mid-Atlantic. However, floating platforms, which have yet to be deployed commercially, will likely need to anchor to the deeper seafloor if deployed off of the West Coast. To analyze the employment and economic potential for floating offshore wind along the West Coast, the Bureau of Ocean Energy Management (BOEM) commissioned the National Renewable Energy Laboratory (NREL) to analyze two hypothetical, large-scale deployment scenarios for Oregon: 5,500 megawatts (MW) of offshore wind deployment in Oregon by 2050 (Scenario A), and 2,900 MW of offshore wind by 2050 (Scenario B). These levels of deployment could power approximately 1,600,000 homes (Scenario A) or 870,000 homes (Scenario B). Offshore wind would contribute to economic development in Oregon in the near future, and more substantially in the long term, especially if equipment and labor are sourced from within the state. According to the analysis, over the 2020-2050 period, Oregon floating offshore wind facilities could support 65,000-97,000 job-years and add $6.8 billion-$9.9 billion to the state GDP (Scenario A).

IFREMER-ADEME colloquium 'Offshore renewable energies: offshore wind energy - sea currents and waves. Collection of abstracts

International Nuclear Information System (INIS)

2004-10-01

This document contains programme and abstracts of contributions presented during a colloquium. These contributions first addresses the context, and regulatory and economic aspects of offshore wind and sea energy: specificities related to the Public Maritime Domain for the implantation of offshore wind turbines, economy of sea energies within a perspective of de-carbonation of the world energy sector, case of offshore wind turbines and assessment of economic impacts of the implantation of sea renewable energy production units, financing stakes for offshore wind energy projects. A second set of contribution addresses the state-of -the-art and feedbacks for offshore wind energy installations. The third set addresses the assessment of resource potential, measurements, models and production prediction for offshore wind energy: case of French coasts, use of radar for remote sensing, wind climatology modelling, data acquisition for wind farm and data processing. The fourth set of contributions addresses the state-of-the-art, feedback, and R and D for sea current energy, while the fifth one addressed the same aspects for sea wave energy. Technology, installations, maintenance and storage in the field of wind energy are then addressed, and the last set deals with environmental and social-economical impacts of sea renewable energies

Automated Image Analysis of Offshore Infrastructure Marine Biofouling

Directory of Open Access Journals (Sweden)

Kate Gormley

2018-01-01

Full Text Available In the UK, some of the oldest oil and gas installations have been in the water for over 40 years and have considerable colonisation by marine organisms, which may lead to both industry challenges and/or potential biodiversity benefits (e.g., artificial reefs. The project objective was to test the use of an automated image analysis software (CoralNet on images of marine biofouling from offshore platforms on the UK continental shelf, with the aim of (i training the software to identify the main marine biofouling organisms on UK platforms; (ii testing the software performance on 3 platforms under 3 different analysis criteria (methods A–C; (iii calculating the percentage cover of marine biofouling organisms and (iv providing recommendations to industry. Following software training with 857 images, and testing of three platforms, results showed that diversity of the three platforms ranged from low (in the central North Sea to moderate (in the northern North Sea. The two central North Sea platforms were dominated by the plumose anemone Metridium dianthus; and the northern North Sea platform showed less obvious species domination. Three different analysis criteria were created, where the method of selection of points, number of points assessed and confidence level thresholds (CT varied: (method A random selection of 20 points with CT 80%, (method B stratified random of 50 points with CT of 90% and (method C a grid approach of 100 points with CT of 90%. Performed across the three platforms, the results showed that there were no significant differences across the majority of species and comparison pairs. No significant difference (across all species was noted between confirmed annotations methods (A, B and C. It was considered that the software performed well for the classification of the main fouling species in the North Sea. Overall, the study showed that the use of automated image analysis software may enable a more efficient and consistent

Modeling lost production from destroyed platforms in the 2004-2005 Gulf of Mexico hurricane seasons

International Nuclear Information System (INIS)

Kaiser, Mark J.; Yu, Yunke; Jablonowski, Christopher J.

2009-01-01

Hurricanes Ivan, Katrina, and Rita passed through the Gulf of Mexico during 2004 and 2005 and resulted in the largest number of destroyed and damaged offshore oil and gas structures in the history of Gulf operations. In the final official government assessment, a total of 126 platforms were destroyed and over 183 structures were identified as having extensive damage. Production associated with wells and structures that are not redeveloped are classified as lost. The purpose of this paper is to derive functional relations that describe the likely contribution the collection of destroyed assets would have made to future production in the Gulf of Mexico. We estimate that the total remaining reserves from the set of destroyed structures range in value between 1.3 and 4.5 billion depending on the assumptions employed. We summarize the impact of the storms on the Gulf of Mexico oil and gas infrastructure and discuss the main issues involved in redevelopment decision making. A meta-model analytic framework is applied to perform sensitivity analysis and to explore the interactions of assumptions on model output. A discussion of the limitations of the analysis is presented. (author)

Aromatic hydrocarbons in produced water from offshore oil and gas production. Test of sample strategy; Aromatiske kulbrinter i produceret vand fra offshore olie- og gas industrien. Test af proevetagningsstrategi

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.

2005-07-01

In co-operation with the Danish EPA, the National Environmental Research Institute (NERI) has carried out a series of measurements of aromatic hydrocarbons in produced water from an offshore oil and gas production platform in the Danish sector of the North Sea as part of the project 'Testing of sampling strategy for aromatic hydrocarbons in produced water from the offshore oil and gas industry'. The measurements included both volatile (BTEX: benzene, toluene, ethylbenzene and xylenes) and semi-volatile aromatic hydrocarbons: NPD (naphthalenes, phenanthrenes and dibenzothiophenes) and selected PAHs (polycyclic aromatic hydrocarbons). In total, 12 samples of produced water were sampled at the Dan FF production platform located in the North Sea by the operator, Maersk Oil and Gas, as four sets of three parallel samples from November 24 - December 02, 2004. After collection of the last set, the samples were shipped to NERI for analysis. The water samples were collected in 1 L glass bottles that were filled completely (without overfilling) and tightly closed. After sampling, the samples were preserved with hydrochloric acid and cooled below ambient until being shipped off to NERI. Here all samples were analysed in dublicates, and the results show that for BTEX, levels were reduced compared to similar measurements carried out by NERI in 2002 and others. In this work, BTEX levels were approximately 5 mg/L, while similar studies showed levels in the range 0,5 - 35 mg/L. For NPD levels were similar, 0,5 - 1,4 mg/L, while for PAH they seerred elevated; 0,1 - 0,4 mg/L in this work compared to 0,001 - 0,3 mg/L in similar studies. The applied sampling strategy has been tested by performing analysis of variance on the analytical data. The test of the analytical data has shown that the mean values of the three parallel samples collected in series constituted a good estimate of the levels at the time of sampling; thus, the variance between the parallel samples was not

Understanding competencies in platform-based product development: Antecedents and outcomes

NARCIS (Netherlands)

Chai, K.H.; Wang, Q; Song, Michael; Halman, Johannes I.M.; Brombacher, A.C.; Brombacher, A.C.

2012-01-01

While previous studies have shed light on the benefits and antecedents of platform-based product development, there is still much to be learned on the subject, particularly through an empirical approach. Based on the literature, this study proposes the concept of product platform competency and

Understanding competencies in platform-based product development : antecedents and outcomes

NARCIS (Netherlands)

Chai, K.H.; Wang, Q.; Song, M.; Halman, J.I.M.; Brombacher, A.C.

2012-01-01

While previous studies have shed light on the benefits and antecedents of platform-based product development, there is still much to be learned on the subject, particularly through an empirical approach. Based on the literature, this study proposes the concept of product platform competency and

Canada-Nova Scotia Offshore Petroleum Board annual report, 1992-1993

International Nuclear Information System (INIS)

1993-06-01

The Canada-Nova Scotia Offshore Petroleum Board was established as the agency responsible for the regulation of the hydrocarbon resources in the Nova Scotia offshore. The Board evaluates resource potential, administers petroleum exploration and production rights, approves offshore activities, and approves benefits and development plans. The main activities of the Board in 1992-1993 are summarized and financial statements are presented. Highlights include production of 572,300 m 3 of oil during the first production season of LASMO Nova Scotia Ltd.'s Cohasset development, the first commercial offshore oil production for Canada; four major resource evaluation projects in the Glenelg Field, the Laurentian sub-basin, the Fundy Rift Basin, and the Panuke Field; holding of discussions between Nova Scotia, Newfoundland, and Canada on the maritime boundary lines between respective offshore petroleum board jurisdictions, in the wake of a June 1992 determination of the disputed maritime boundary around St. Pierre et Miquelon; and amendments of certain safety-related legislation applicable to offshore operations. Employment benefits of the Cohasset project during 1992 totalled ca 470 Nova Scotians and 120 other Canadians. 3 tabs

Environmental Impact of Offshore Gas Activities on the Benthic Environment: A Case Study.

Science.gov (United States)

Punzo, E; Gomiero, A; Tassetti, A N; Strafella, P; Santelli, A; Salvalaggio, V; Spagnolo, A; Scarcella, G; De Biasi, A M; Kozinkova, L; Fabi, G

2017-08-01

Multidisciplinary monitoring of the impact of offshore gas platforms on northern and central Adriatic marine ecosystems has been conducted since 1998. Beginning in 2006, 4-5 year investigations spanning the period before, during, and after rig installation have explored the effects of its construction and presence on macrozoobenthic communities, sediment, water quality, pollutant bioaccumulation, and fish assemblages. In this study, sediment samples collected at increasing distance from an offshore gas platform before, during and after its construction were subjected to chemical analysis and assessment of benthic communities. Ecological indices were calculated to evaluate the ecological status of the area. Ecotoxicological analysis of sediment was performed to establish whether pollutants are transferred to biota. The study applied a before-after control-impact design to assess the effects of rig construction and presence and provide reference data on the possible impacts of any further expansion of the gas extraction industry in the already heavily exploited Adriatic Sea. Only some of the metals investigated (barium, chromium, cadmium, and zinc) showed a different spatial and/or temporal distribution that may be platform-related. In the early phases, the sediment concentrations of polycyclic aromatic hydrocarbons were below the detection limit at all sites; they then became detectable, but without significant spatial differences. The present findings suggest that the environmental effects of offshore gas platforms may be difficult to quantify, interpret, and generalize, because they are influenced by numerous, often local, abiotic, and biotic variables in different and unpredictable ways.

Environmental Impact of Offshore Gas Activities on the Benthic Environment: A Case Study

Science.gov (United States)

Punzo, E.; Gomiero, A.; Tassetti, A. N.; Strafella, P.; Santelli, A.; Salvalaggio, V.; Spagnolo, A.; Scarcella, G.; De Biasi, A. M.; Kozinkova, L.; Fabi, G.

2017-08-01

Multidisciplinary monitoring of the impact of offshore gas platforms on northern and central Adriatic marine ecosystems has been conducted since 1998. Beginning in 2006, 4-5 year investigations spanning the period before, during, and after rig installation have explored the effects of its construction and presence on macrozoobenthic communities, sediment, water quality, pollutant bioaccumulation, and fish assemblages. In this study, sediment samples collected at increasing distance from an offshore gas platform before, during and after its construction were subjected to chemical analysis and assessment of benthic communities. Ecological indices were calculated to evaluate the ecological status of the area. Ecotoxicological analysis of sediment was performed to establish whether pollutants are transferred to biota. The study applied a before-after control-impact design to assess the effects of rig construction and presence and provide reference data on the possible impacts of any further expansion of the gas extraction industry in the already heavily exploited Adriatic Sea. Only some of the metals investigated (barium, chromium, cadmium, and zinc) showed a different spatial and/or temporal distribution that may be platform-related. In the early phases, the sediment concentrations of polycyclic aromatic hydrocarbons were below the detection limit at all sites; they then became detectable, but without significant spatial differences. The present findings suggest that the environmental effects of offshore gas platforms may be difficult to quantify, interpret, and generalize, because they are influenced by numerous, often local, abiotic, and biotic variables in different and unpredictable ways.

Integrated method to optimize well connection and platform placement on a multi-reservoir scenario

Energy Technology Data Exchange (ETDEWEB)

Sousa, Sergio Henrique Guerra de; Madeira, Marcelo Gomes; Franca, Martha Salles [Halliburton, Rio de Janeiro, RJ (Brazil); Mota, Rosane Oliveira; Silva, Edilon Ribeiro da; King, Vanessa Pereira Spear [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2012-07-01

This paper describes a workflow created to optimize the platform placement and well-platform connections on a multi reservoir scenario using an integrated reservoir simulator paired with an optimization engine. The proposed methodology describes how a new platform, being incorporated into a pre-existing asset, can be better used to develop newly-discovered fields, while helping increase the production of existing fields by sharing their production load. The sharing of production facilities is highly important in Brazilian offshore assets because of their high price (a few billion dollars per facility) and the fact that total production is usually limited to the installed capacity of liquid processing, which is an important constraint on high water-cut well production rates typical to this region. The case study asset used to present the workflow consists of two deep water oil fields, each one developed by its own production platform, and a newly-discovered field with strong aquifer support that will be entirely developed with a new production platform. Because this new field should not include injector wells owing to the strong aquifer presence, the idea is to consider reconnecting existing wells from the two pre-existing fields to better use the production resources. In this scenario, the platform location is an important optimization issue, as a balance between supporting the production of the planned wells on the new field and the production of re-routed wells from the existing fields must be reached to achieve improved overall asset production. If the new platform is too far away from any interconnected production well, pressure-drop issues along the pipeline might actually decrease production from the existing fields rather than augment it. The main contribution of this work is giving the reader insights on how to model and optimize these complex decisions to generate high-quality scenarios. (author)

Proceedings of the ENDOW workshop 'Offshore wakes: Measurements and modelling[Efficient Development of Offshore Windfarms

Energy Technology Data Exchange (ETDEWEB)

Barthelmie, R.J. (ed.)

2002-03-01

The papers presented in these Proceedings are the result of a workshop held at Risoe National Laboratory on March 7 and 8 2002 entitled 'Offshore Wakes: Measurements and Modelling'. The Workshop was arranged to showcase results of the European Community supported project 'Efficient Development of Offshore Windfarms (ENDOW)' and featured a series of eight presentations discussing modelling of wakes and boundary layers, existing and new measurements from offshore wind farms and how these will be linked in a new design tool and applied at planned offshore wind farms. In addition seven invited presentations covered a range of relevant topics from analytical approaches to fatigue and extreme loads in wind turbine clusters, current wake modelling in WAsP, optimising power production at Arklow Bank, Particle Image Velocimetry study of a wind turbine wake in a yaw, offshore wind measurements in Massachusetts, accuracy of SODAR measurements for wind energy and tidal influence of offshore wind speeds and turbulence. (au)

Offshore Hydrokinetic Energy Conversion for Onshore Power Generation

Science.gov (United States)

Jones, Jack A.; Chao, Yi

2009-01-01

Design comparisons have been performed for a number of different tidal energy systems, including a fully submerged, horizontal-axis electro-turbine system, similar to Verdant Tidal Turbines in New York's East River, a platform-based Marine Current Turbine, now operating in Northern Ireland's Strangford Narrows, and the Rotech Lunar Energy system, to be installed off the South Korean Coast. A fourth type of tidal energy system studied is a novel JPL/Caltech hydraulic energy transfer system that uses submerged turbine blades which are mechanically attached to adjacent high-pressure pumps, instead of to adjacent electrical turbines. The generated highpressure water streams are combined and transferred to an onshore hydroelectric plant by means of a closed-cycle pipeline. The hydraulic energy transfer system was found to be cost competitive, and it allows all electronics to be placed onshore, thus greatly reducing maintenance costs and corrosion problems. It also eliminates the expenses of conditioning and transferring multiple offshore power lines and of building offshore platforms embedded in the sea floor.

Inventory dynamic management applied to supply offshore production units; Gerenciamento dinamico da localizacao de armazens e alocacao de estoques aplicado ao abastecimento de unidades de producao offshore

Energy Technology Data Exchange (ETDEWEB)

Silva, Thiago Castilho Moreira; Ferreira Filho, Virgilio Jose Martins [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil)

2012-07-01

The discovery of large reserves in the region called the pre-salt, significantly changed the environment of oil production in Brazil, as well as the entire chain involved in these activities. From the standpoint of logistics network linked to exploration and production of oil, located further down the coast at greater depths and in a place with no infrastructure in place, new and challenging problems arise: tighter restrictions need to address the problem at different levels hierarchical, requiring consideration of risks and uncertainties in addressing problems and decision making. The correct dimensioning of the network of support facilities, the allocation and sizing of inventory of supplies and spare parts illustrate a series of decisions ranging from strategic decisions to operational planning. In terms of specific operations involved in oil production in offshore platforms, with severe space constraints and high costs of storage and transport these issues are of particular interest. The objective of this work is to develop a model of inventory management, aiming to supply equipment for the extraction of oil at sea, usually called Production Units (UPs), which considers: effects of consolidating inventory, potential alternatives to location of these inventories and time variation of both the location of the UPs, and their demand patterns. For this purpose we developed a nonlinear mathematical programming model whose objective is to minimize the fixed costs of installation of warehouses and variable costs of transportation and storage. Different scenarios are analyzed to understand how the incorporation of the cycle and safety stocks affects the decision to locate one or more warehouses, and also the effects related to the main inventory allocation policies. (author)

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Directory of Open Access Journals (Sweden)

Jiang Qi-Jie

2017-04-01

Full Text Available How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Science.gov (United States)

Jiang, Qi-Jie; Jin, Mao-Zhu; Ren, Pei-Yu

2017-04-01

How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC) and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

Application of natural antimicrobial compounds for reservoir souring and MIC prevention in offshore oil and gas production systems

DEFF Research Database (Denmark)

Thomsen, Mette Hedegaard; Skovhus, Torben Lund; Mashietti, Marco

Offshore oil production facilities are subjectable to internal corrosion, potentially leading to human and environmental risk and significant economic losses. Microbiologically influenced corrosion (MIC) and reservoir souring - sulphide production by sulfate reducing microorganisms in the reservo...

Radiation dose and risk to recreational fishermen from ingestion of fish caught near eight oil platforms in the Gulf of Mexico

International Nuclear Information System (INIS)

Meinhold, A.F.; Holtzman, S.

1998-06-01

Offshore production of oil and gas is accompanied by a saline wastewater, called produced water. Produced water discharges to the Gulf of Mexico often contain elevated concentrations of radionuclides that occur naturally in the geologic reservoir along with the oil and gas. These radionuclides may accumulate in organisms that live near offshore oil and gas structures. Because recreational fishing in the Gulf of Mexico is concentrated near oil and gas platforms, there is the potential for increased risks to recreational fishermen from the ingestion of radionuclides in fish caught near produced water discharges. This analysis investigated the potential risk to recreational fishermen from radium and lead-210 in offshore produced water discharged to the Gulf of Mexico

Radiation dose and risk to recreational fishermen from ingestion of fish caught near eight oil platforms in the Gulf of Mexico

Energy Technology Data Exchange (ETDEWEB)

Meinhold, A.F.; Holtzman, S.

1998-06-01

Offshore production of oil and gas is accompanied by a saline wastewater, called produced water. Produced water discharges to the Gulf of Mexico often contain elevated concentrations of radionuclides that occur naturally in the geologic reservoir along with the oil and gas. These radionuclides may accumulate in organisms that live near offshore oil and gas structures. Because recreational fishing in the Gulf of Mexico is concentrated near oil and gas platforms, there is the potential for increased risks to recreational fishermen from the ingestion of radionuclides in fish caught near produced water discharges. This analysis investigated the potential risk to recreational fishermen from radium and lead-210 in offshore produced water discharged to the Gulf of Mexico.

Reliability Analysis of Tubular Joints in Offshore Structures

DEFF Research Database (Denmark)

Thoft-Christensen, Palle; Sørensen, John Dalsgaard

1987-01-01

Reliability analysis of single tubular joints and offshore platforms with tubular joints is" presented. The failure modes considered are yielding, punching, buckling and fatigue failure. Element reliability as well as systems reliability approaches are used and illustrated by several examples....... Finally, optimal design of tubular.joints with reliability constraints is discussed and illustrated by an example....

Legal aspects of financing Canadian offshore oil and gas developments

International Nuclear Information System (INIS)

Green, J.M.; Hudec, A.J.

1992-01-01

A review is presented of the significant legal considerations involved in structuring, negotiating, and documenting commercial financing of a Canadian offshore oil and gas production facility. Emphasis is placed on the Hibernia Project in the Newfoundland offshore as an example, and more specifically the $450 million bank financing completed in November 1991. The legal framework governing offshore production financing in this case was complex, due to the project's location in international waters on the continental shelf. Complex intergovernmental arrangements have been implemented between Canada and Newfoundland to govern the offshore area and regulate the project. An agreement called the Atlantic Accord allowed the Canada Newfoundland Offshore Petroleum Board (CNOPB) to grant production licenses and to regulate offshore exploration and development, with matters relating to legislation, taxation, and royalties shared between the governments. Certain other acts were enacted or extended for application to the offshore area. The CNOPB administers a registry system for transfers and security interests in offshore licenses. Security interests including property are ensured by the Hibernia Act, which makes Newfoundland's existing security interest regime applicable to the offshore. The project owners are operating Hibernia as a joint venture, and the structure of project financing and inter-creditor arrangements is examined. The competing security interest of project lenders and non-defaulting participants is discussed, along with assignment of priorities on the security in case of default

Assessment of radiological problems due to natural radionuclides, in units of exploration and production of petroleum

International Nuclear Information System (INIS)

Matta, Luiz E.S.C.; Godoy, Jose M.O.; Reis, Maria C.D.; Pinto, Renato S.M.

2001-01-01

This paper describes the study of the occurrence of technologically enhanced natural radioactive material in petroleum offshore platforms of Campos Basin. The material found in drums that came from the platforms and scales from production tubes were analyzed for characterization and determination of its specific activity. There were made measurement of the dose rate in several platforms and radon concentration in onshore and offshore facilities. The results were compared with limits of the Brazilian legislation and international recommendations and actions were proposed to be implemented to assure the workers and environment protection. The results show that with the adequate actions the workers will not receive exposures above the public limits according international recommendations. (author)

Disentangling the control of tectonics, eustasy, trophic conditions and climate on shallow-marine carbonate production during the Aalenian-Oxfordian interval: From the western France platform to the western Tethyan domain

Science.gov (United States)

Andrieu, Simon; Brigaud, Benjamin; Barbarand, Jocelyn; Lasseur, Eric; Saucède, Thomas

2016-11-01

The objective of this work is to improve our understanding of the processes controlling changes in the architecture and facies of intracontinental carbonate platforms. We examined the facies and sequence stratigraphy of Aalenian to Oxfordian limestones of western France. Seventy-seven outcrop sections were studied and thirty-one sedimentary facies identified in five depositional environments ranging from lower offshore to backshore. Platform evolution was reconstructed along a 500 km cross-section. Twenty-two depositional sequences were identified on the entire western France platform and correlated with European third-order sequences at the biozone level, demonstrating that eustasy was the major factor controlling the cyclic trend of accommodation. The tectonic subsidence rate was computed from accommodation measurements from the Aalenian to the Oxfordian in key localities. Tectonism controlled the sedimentation rate and platform architecture at a longer time scale. Tectonic subsidence triggered the demise of carbonate production at the Bathonian/Callovian boundary while the uplift made possible the recovery of carbonate platform from Caen to Le Mans during the mid Oxfordian. Topography of the Paleozoic basement mainly controlled lateral variations of paleodepth within the western France platform until the mid Bathonian. A synthesis of carbonate production in the western Tethyan domain at that time was conducted. Stages of high carbonate production during the Bajocian/Bathonian and the middle to late Oxfordian are synchronous with low δ13C, high eccentricity intervals, and rather dry climate promoting (1) evaporation and carbonate supersaturation, and (2) oligotrophic conditions. Periods of low carbonate production during the Aalenian and from the middle Callovian to early Oxfordian correlate with high δ13C and low eccentricity intervals, characterized by wet climate and less oligotrophic conditions. Such conditions tend to diminish growth potential of carbonate

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

A database of archived drilling records of the drill cuttings piles at the North West Hutton oil platform

International Nuclear Information System (INIS)

Marsh, Roy

2003-01-01

Drill cuttings piles are found underneath several hundred oil platforms in the North Sea, and are contaminated with hydrocarbons and chemical products. This study characterised the environmental risk posed by the cuttings pile at the North West Hutton (NWH) oil platform. Data on the drilling fluids and chemical products used over the platform's drilling history were transferred from archived well reports into a custom database, to which were added toxicological and safety data. Although the database contained many gaps, it established that only seven chemical products used at NWH were not in the lowest category of the Offshore Chemicals Notification Scheme, and were used in only small quantities. The study therefore supports the view that the main environmental risk posed by cuttings piles comes from hydrocarbon contamination. The (dated) well records could help future core sampling to be targeted at specific locations in the cuttings piles. Data from many platforms could also be pooled to determine generic 'discharge profiles.' Future study would benefit from the existence, in the public domain, of a standardised, 'legacy' database of chemical products

Plant-wide Control for Better De-oiling of Produced Water in Offshore Oil & Gas Production

DEFF Research Database (Denmark)

Yang, Zhenyu; Stigkær, Jens Peter; Løhndorf, Bo

2013-01-01

This paper discusses the application of plant-wide control philosophy to enhance the performance and capacity of the Produced Water Treatment (PWT) in offshore oil & gas production processes. Different from most existing facility- or material-based PWT innovation methods, the objective of this work...

Centralized electricity generation in offshore wind farms using hydraulic networks

NARCIS (Netherlands)

Jarquin Laguna, A.

2017-01-01

The work presented in this thesis explores a new way of generation, collection and transmission of wind energy inside a wind farm, in which the electrical conversion does not occur during any intermediate conversion step before the energy has reached the offshore central platform. A centralized

Risks to offshore installations in Europe due to natural hazards

Science.gov (United States)

Necci, Amos; Krausmann, Elisabeth

2017-04-01

Natural hazards, such as storms, earthquakes, or lightning are a major threat to industry. In particular, chemical plants, storage facilities, pipelines, and offshore oil and gas facilities are vulnerable to natural events which can cause hazardous materials releases and thereby endanger workers, the population and the environment. These technological accidents are commonly referred to as Natech accidents. Recent events have increased concerns about safety in the offshore oil and gas sector, and the need for improving knowledge on the matter has become evident. With those premises, we analyzed accidents, near misses and accident precursors at offshore facilities in Europe caused by natural events using both a statistical and a qualitative approach. For this purpose, we screened the World Offshore Accident Database (WOAD) to identify all incidents that featured natural events as causes or aggravating factors. A dataset of 1,085 global Natech events was built for the statistical analysis. Among those, a subset composed of 303 European records was selected. The results of the analysis showed that offshore Natech events in Europe are frequent; they resulted, however, in low consequences. The main threat to offshore facilities resulted from bad weather, such as strong winds and heavy seas. Storms can put intense loads on the structural parts of offshore installations, eventually exceeding design resistance specifications. Several incidents triggered by lightning strikes and earthquakes were also recorded. Substantial differences in terms of vulnerability, damage modality and consequences emerged between fixed and floating offshore structures. The main damage mode for floating structures was the failure of station keeping systems due to the rupture of mooring or anchors, mainly caused by adverse meteorological conditions. Most of the incidents at fixed offshore structures in Europe involved falling loads for both metal jacket and concrete base platforms due to storms. In

Topologies of multiterminal HVDC-VSC transmission for large offshore wind farms

Energy Technology Data Exchange (ETDEWEB)

Gomis-Bellmunt, Oriol [Centre d' Innovacio Tecnologica en Convertidors Estatics i Accionaments (CITCEA-UPC), Universitat Politecnica de Catalunya UPC, Av. Diagonal, 647, Pl. 2. 08028 Barcelona (Spain); IREC Catalonia Institute for Energy Research, Barcelona (Spain); Liang, Jun; Ekanayake, Janaka; King, Rosemary; Jenkins, Nicholas [School of Engineering, Cardiff University, Queen' s Buildings, The Parade, Cardiff CF24 3AA, Wales (United Kingdom)

2011-02-15

Topologies of multiterminal HVDC-VSC transmission systems for large offshore wind farms are investigated. System requirements for multiterminal HVDC are described, particularly the maximum power loss allowed in the event of a fault. Alternative control schemes and HVDC circuit topologies are reviewed, including the need for HVDC circuit breakers. Various topologies are analyzed and compared according to a number of criteria: number and capacity of HVDC circuits, number of HVDC circuit breakers, maximum power loss, flexibility, redundancy, lines utilization, need for offshore switching platforms and fast communications. (author)

Production Platform Development Through the Four Loops of Concern

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

2017-01-01

Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers...

Collaborative Development Planning Model of Supporting Product in Platform Innovation Ecosystem

OpenAIRE

Wei Zhang; Hamid Reza Karimi; Qingpu Zhang; Shaobo Wu

2014-01-01

Published version of an article in the journal: Mathematical Problems in Engineering. Also available from the publisher at: http://10.1155/2014/690589 In order to improve the market value of the product, the platform enterprise often participates in the development process of supporting product of emerging industry's platform innovation ecosystem. This paper puts forward a revenue sharing contract between the platform company and the supporting company by creating a collaborative developme...

Production Platform Development Through the Four Loops of Concern

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

2017-01-01

Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers t...

Cleaning the Produced Water in Offshore Oil Production by Using Plant-wide Optimal Control Strategy

DEFF Research Database (Denmark)

Yang, Zhenyu; Pedersen, Simon; Løhndorf, Petar Durdevic

2014-01-01

To clean the produced water is always a challenging critical issue in the offshore oil & gas industry. By employing the plant-wide control technology, this paper discussed the opportunity to optimize the most popular hydrocyclone-based Produced Water Treatment (PWT) system. The optimizations of t...... of this research is to promote a technical breakthrough in the PWT control design, which can lead to the best environmental protection in the oil & gas production, without sacrificing the production capability and production costs....

Go offshore -Combining food and energy production

DEFF Research Database (Denmark)

Christensen, Erik Damgaard; Stuiver, Marian; Guanche, Raul

European oceans will be subject to massive development of marine infrastructure in the near future. The development includes energy facilities, e.g. offshore wind farms, exploitation of wave energy, and also development and implementation of marine aquaculture This change of infrastructure makes ...

Neuro-fuzzy control strategy for an offshore steel jacket platform subjected to wave-induced forces using magneto rheological dampers

International Nuclear Information System (INIS)

Sarrafan, Atabak; Zareh, Seiyed Hamid; Khayyat, Amir Ali Akbar; Zabihollah, Abolghassem

2012-01-01

Magnetorheological (MR) damper is a prominent semi-active control device to vibrate mitigation of structures. Due to the inherent non-linear nature of MR damper, an intelligent non-linear neuro-fuzzy control strategy is designed to control wave-induced vibration of an offshore steel jacket platform equipped with MR dampers. In the proposed control system, a dynamic-feedback neural network is adapted to model non-linear dynamic system, and the fuzzy logic controller is used to determine the control forces of MR dampers. By use of two feed forward neural networks required voltages and actual MR damper forces are obtained, in which the first neural network and the second one acts as the inverse dynamics model, and the forward dynamics model of the MR dampers, respectively. The most important characteristic of the proposed intelligent control strategy is its inherent robustness and its ability to handle the non-linear behavior of the system. Besides, no mathematical model needed to calculate forces produced by MR dampers. According to linearized Morison equation, wave-induced forces are determined. The performance of the proposed neuro-fuzzy control system is compared with that of a traditional semi-active control strategy, i.e., clipped optimal control system with LQG-target controller, through computer simulations, while the uncontrolled system response is used as the baseline. It is demonstrated that the design of proposed control system framework is more effective than that of the clipped optimal control scheme with LQG-target controller to reduce the vibration of offshore structure. Furthermore, the control strategy is very important for semi-active control

Measurement and Analysis of Extreme Wave and Ice Actions in the Great Lakes for Offshore Wind Platform Design

Energy Technology Data Exchange (ETDEWEB)

England, Tony [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering; van Nieuwstadt, Lin [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering; De Roo, Roger [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering; Karr, Dale [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering; Lozenge, David [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering; Meadows, Guy [Univ. of Michigan, Ann Arbor, MI (United States). College of Engineering

2016-05-30

This project, funded by the Department of Energy as DE-EE0005376, successfully measured wind-driven lake ice forces on an offshore structure in Lake Superior through one of the coldest winters in recent history. While offshore regions of the Great Lakes offer promising opportunities for harvesting wind energy, these massive bodies of freshwater also offer extreme and unique challenges. Among these challenges is the need to anticipate forces exerted on offshore structures by lake ice. The parameters of interest include the frequency, extent, and movement of lake ice, parameters that are routinely monitored via satellite, and ice thickness, a parameter that has been monitored at discrete locations over many years and is routinely modeled. Essential relationships for these data to be of use in the design of offshore structures and the primary objective of this project are measurements of maximum forces that lake ice of known thicknesses might exert on an offshore structure.

Lightweight Efficient Offshore Fenders

DEFF Research Database (Denmark)

Banke, Lars; Simonsen, Bo Cerup

1996-01-01

At offshore platforms the purpose of fenders is to protect the oil-risers against minor accidental collisions from supply vessels.Normally the fender is designed by use of thin-walled tubes. However, the tube itself is not normally capable of resisting the impact load from of the boat. Therefore...... alternative designs are searched for the fender.Today, an often-used improvement of the fender is to fill it with grout or concrete. However, this improvement is not optimal since the fillingsincrease the weight of the finder beyond the crane capacity of the platform. This causes the need of crane boats...... for installation of the fender and eventually for removing it if new oil-risers are to be installed. The use of crane oats is expensive and weather dependent.Having these effects in mind a study of the energy absorption in the fender system, i.e. the fender itself and the frame, is needed for a furtherdevelopment...

Radiation and contamination survey of the Terengganu offshore facilities

International Nuclear Information System (INIS)

Amran Abd Majid; Sukiman Sarmani

1995-01-01

It is well known that low specific activity of technologically enhanced naturally occurring radioactive materials (LSA TENORM) such as U-238 and Th-232 and their daughter products have been associated with oil and gas fields. For the period of October 1988 and August 1989 UKM personels were involved in conducting the radiation and contamination survey at several offshore platforms in Terengganu. The results showed that the maximum external and internal radiation levels was 0. 45 μSv/hr whereas the maximum surface contamination level was 0. 124 Bq cm sup -2. These results indicate that the levels were below the level prescribed by the Malaysian Atomic Energy Licensing Board. However, several measures still need to be considered for the safety of the workers and will be discussed in this paper. (author)

The Governance of Multi-Use Platforms at Sea for Energy Production and Aquaculture: Challenges for Policy Makers in European Seas

Directory of Open Access Journals (Sweden)

Marian Stuiver

2016-04-01

Full Text Available European seas are encountering an upsurge in competing marine activities and infrastructures. Traditional exploitation such as fisheries, tourism, transportation, and oil production are accompanied by new sustainable economic activities such as offshore windfarms, aquaculture, and tidal and wave energy. One proposed solution to overcome possible competing claims at sea lies in combining these economic activities as part of Multi-Use Platforms at Sea (MUPS. MUPS can be understood as areas at sea, designated for a combination of activities, either completely integrated in a platform or in shared marine space. MUPS can potentially benefit from each other in terms of infrastructure, maintenance, etc. Developing MUPS in the marine environment demands adequate governance. In this article, we investigate four European sites to find out how governance arrangements may facilitate or complicate MUPs. In particular, we apply a framework specifying policy, economic, social, technical, environmental, and legal (PESTEL factors to explore governance arrangements in four case study sites in different sea basins around Europe (the Mediterranean Sea, the Atlantic Ocean, the North Sea, and the Baltic Sea. The article concludes with policy recommendations on a governance regime for facilitating the development of MUPS in the future.

Reconstruction of burial history, temperature, source rock maturity and hydrocarbon generation in the northwestern Dutch offshore

NARCIS (Netherlands)

Abdul Fattah, R.; Verweij, J.M.; Witmans, N.; Veen, J.H. ten

2012-01-01

3D basin modelling is used to investigate the history of maturation and hydrocarbon generation on the main platforms in the northwestern part of the offshore area of the Netherlands. The study area covers the Cleaverbank and Elbow Spit Platforms. Recently compiled maps and data are used to build the

Specific radiological monitoring experiences and the challenges at offshore

International Nuclear Information System (INIS)

Mod Omar Hassan

2005-01-01

Lately, EASELAB / PROJEK KHAS has performed Specific Radiological Monitoring job at offshore rigs off Terengganu for Syarikat Petronas Carigali [M] Sdn Bhd. In order to perform the job, every worker must attend a Basic Offshore Safety and Emergency Training Course and pass the theory and practical test. Before a license or safety passport is issued, the worker must undergo Medical Checkup and certified physically and mentally fit. The passport is recognized by most of international oil companies. During performing the jobs, MINT staff has faced some difficulties such as weather conditions, to suit with the working environment and life at the oil platform. There were a few staff has withdrew (resigned) from performing the jobs. (Author)

Offshore Wind Power Production in Critical Weather Conditions

DEFF Research Database (Denmark)

Cutululis, Nicolaos Antonio; Litong-Palima, Marisciel; Sørensen, Poul Ejnar

2012-01-01

control the power balance during offshore storm passages. The demonstration will be done on Horns Rev 2 wind farm. In the same project, the impact of a storm front passage over the system security, for the whole Danish system, and with the expected offshore wind power in 2020 will be investigated....... This paper will present the results of up-scaling the impact that a storm front passage will have on the Danish power system in 2020, given that the existing wind turbine storm controller is not replaced. The simulations are done with CorWind and the analysis is focusing on establishing a reference case...... and quantifying the balancing reserve requirements needed in order to keep the security of the power system....

Who greens the waves? Changing authority in the environmental governance of shipping and offshore oil and gas production

International Nuclear Information System (INIS)

Van Leeuwen, J.

2010-01-01

The marine environment is under serious pressure from human activities. The transboundary and large-scale nature of these threats require cooperation between states, and between states, industries and NGOs. Marine governance therefore becomes a breeding ground for innovation: multi-level and multi-actor governance and changing spheres of authority. This book applies the concept 'spheres of authority' to investigate the nature of these innovations in governing shipping and offshore oil and gas production. In the environmental governance of shipping, authority is shifting from states that own ships to states that own ports. The environmental governance of offshore oil and gas production shows a shared authority for developing and implementing policies between state and industry, but not a diminishing authority of the state.

Model Predictive Control of Offshore Power Stations With Waste Heat Recovery

DEFF Research Database (Denmark)

Pierobon, Leonardo; Chan, Richard; Li, Xiangan

2016-01-01

The implementation of waste heat recovery units on oil and gas offshore platforms demands advances in both design methods and control systems. Model-based control algorithms can play an important role in the operation of offshore power stations. A novel regulator based on a linear model predictive...... control (MPC) coupled with a steady-state performance optimizer has been developed in the SIMULINK language and is documented in the paper. The test case is the regulation of a power system serving an oil and gas platform in the Norwegian Sea. One of the three gas turbines is combined with an organic...... Rankine cycle (ORC) turbogenerator to increase the energy conversion efficiency. Results show a potential reduction of frequency drop up to 40%for a step in the load set-point of 4 MW, compared to proportional–integral control systems. Fuel savings in the range of 2–3% are also expected by optimizing on...

Specificity of Geotechnical Measurements and Practice of Polish Offshore Operations

Directory of Open Access Journals (Sweden)

Bogumil Laczynski

2015-12-01

Full Text Available As offshore market in Europe grows faster and faster, new sea areas are being managed and new ideas on how to use the sea potential are being developed. In North Sea, where offshore industry conducts intensive expansion since late 1960s, numerous wind farms, oil and gas platforms and pipelines have been put into operation following extensive research, including geotechnical measurement. Recently, a great number of similar projects is under development in Baltic Sea, inter alia in Polish EEZ, natural conditions of which vary from the North Sea significantly. In this paper, those differences are described together with some solutions to problems thereby arising.

Floating offshore turbines

DEFF Research Database (Denmark)

Tande, John Olav Giæver; Merz, Karl; Schmidt Paulsen, Uwe

2014-01-01

metric of energy production per unit steel mass. Floating offshore wind turbines represent a promising technology. The successful operation of HyWind and WindFloat in full scale demonstrates a well advanced technology readiness level, where further development will go into refining the concepts, cost...

Shifting towards offshore wind energy—Recent activity and future development

International Nuclear Information System (INIS)

Kaldellis, J.K.; Kapsali, M.

2013-01-01

To date, most of the existing wind farms have been built on-land but during the last few years many countries have also invested in offshore applications. The shift towards offshore wind project developments has mainly been driven by European energy policies, especially in north-west countries. In offshore sites the winds are stronger and steadier than on-land, making wind farms more productive with higher capacity factors. On the other hand, although offshore wind energy is not in its infancy period, most of the costs associated with its development are still much higher from onshore counterparts; however some recent technological progress may have the potential to narrow this gap in the years to come. In the present work, an overview of the activity noted in the field of offshore wind energy is carried out, with emphasis being given on the current status and future trends of the technology employed, examining at the same time energy production and availability issues as well as economic considerations. - Highlights: ► An overview of the activity noted in the field of offshore wind energy is carried out. ► Emphasis is given on the current status and future trends of the technology. ► Wind energy production and availability issues are discussed. ► Economic issues such as investment and energy production costs are also analysed.

Preliminary Design of a Multi-Column TLP Foundation for a 5-MW Offshore Wind Turbine

Directory of Open Access Journals (Sweden)

Yanping He

2012-10-01

Full Text Available Currently, floating wind turbines (FWTs may be the more economical and suitable systems with which to exploit offshore wind energy in deep waters. Among the various types of floating foundations for offshore wind farms, a tension leg platform (TLP foundation can provide a relatively stable platform for currently available offshore wind turbines without requiring major modifications. In this study, a new multi-column TLP foundation (WindStar TLP was developed for the NREL 5-MW offshore wind turbine according to site-specific environmental conditions, which are the same as the OC3-Hywind (NREL conditions. The general arrangement, main structure and mooring system were also designed and investigated through hydrodynamic and natural frequency analyses. The complete system avoids resonance through the rotor excitations. An aero-hydro-servo-elastic coupled analysis was carried out in the time domain with the numerical tool FAST. Statistics of the key parameters were obtained and analysed and comparisons to MIT/NREL TLP are made. As a result, the design requirements were shown to be satisfied, and the proposed WindStar TLP was shown to have favourable motion characteristics under extreme wind and wave conditions with a lighter and smaller structure. The new concept holds great potential for further development.

Complex products and Systems: Potential from using layout platforms

NARCIS (Netherlands)

Hofer, A.P.; Halman, J.I.M.

2004-01-01

In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates

Developments in offshore technology. Entwicklungen in der Offshoretechnik

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

This book contains the summarized lectures held on the 8th of October, 1981 within the first status Seminar 'Offshore technology' which was organized by the Federal Minstry for Research and Technology. Contents are divided into: 1. Offshore-natural gas liquefaction, conveying systems. Offshore-tanker charging with supercold liquiefied gases; development of LNG-offshore - convayance systems; 2.) Development of components and installations in offshore structures: mooving-measuring- and monitoring systems for the installation of the EPOS deck; underwater-piling with a hydraulic-pile hammer; cast steel nodes for offshore-structures (material, calculation, design); 3.) underwater tools: the underwater-working system SUPRA; test results and experience with the unmanned UW-instrument-carrier FUGE; development of a mobile diver assistance vehicle for inspection and maintenance duties; 4.) underwater-pipeline-technique: flexible offshore-pipeline/continuous production and assembly, pipeline assembly at sea according to the J-Method with flash-welding technique; construction and testing of UWAG I (underwater working device) for embedding cables and pipes in the ocean soil.

Offshoring trends in the manufacturing process within the automotive industry

DEFF Research Database (Denmark)

Simplay, S.; Hansen, Zaza Nadja Lee

2014-01-01

consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... engineering activities. This development has created several challenges. These challenges arose as organisations are not considering how offshoring activities could be integrated with an increasingly global supply chain for the manufacturing of the final product. The paper contributes to manufacturing theory...

Offshoring and Job Stability : Evidence from Italian Manufacturing

NARCIS (Netherlands)

Lo Turco, A.; Maggioni, D.; Picchio, M.

2012-01-01

Abstract: We study the relationship between offshoring and job stability in Italy in the period 1995–2001 by using an administrative dataset on manufacturing workers. We find that the international fragmentation of production negatively affects job stability. Service offshoring and material

Optimisation of Offshore Wind Farm Cable Connection Layout Considering Levelised Production Cost Using Dynamic Minimum Spanning Tree Algorithm

DEFF Research Database (Denmark)

Hou, Peng; Hu, Weihao; Chen, Cong

2016-01-01

The approach in this paper hads been developed to optimize the cable connection layout of large scale offshore wind farms. The objective is to minimize the Levelised Production Cost (LPC) og an offshore wind farm by optimizing the cable connection configuration. Based on the minimum spanning tree...... (MST) algorithm, an improved algorithm, the Dynamic Minimum Spanning Tree (DMST) algorithm is proposed. The current carrying capacity of the cable is considered to be the main constraint and the cable sectional area is changed dynamically. An irregular shaped wind farm is chosen as the studie case...

Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

Science.gov (United States)

Claisse, Jeremy T; Pondella, Daniel J; Love, Milton; Zahn, Laurel A; Williams, Chelsea M; Bull, Ann S

2015-01-01

When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

Directory of Open Access Journals (Sweden)

Jeremy T Claisse

Full Text Available When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes. "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

Microbial platform for production of aromatic compounds

DEFF Research Database (Denmark)

Skovbjerg, Christine Alexandra Egaa; Olsen, Kresten Jon Kromphardt; Larsen, Thomas Ostenfeld

2017-01-01

Polyketides form the basic building blocks of numerous natural products, which are in use in pharmaceuticals, food additives and other fine chemicals. Many of these polyketides possess very specific cyclic and aromatic conformations. The programmable platform we aim to create will be able...

Challenges and solutions for installing an intelligent completion in offshore deepwater Brazil

Energy Technology Data Exchange (ETDEWEB)

Reyes, Alfonso R. [WellDynamics, Spring, TX (United States); Arias, Jose Luiz [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

This paper describes an atypical and challenging Intelligent Well Completion (IWC) installed in ultra deep water (1500-2000 m), offshore Brazil. The well is a water injector designed to selectively control the injection flow rate in to two stacked gravel pack zones. The field is Roncador, approximately 150 kilometers offshore the North-Eastern coast of the state of Rio de Janeiro, Brazil. This application is an atypical IWC due to the long distance ({approx}15 Km) from the production platform to the well. Intelligent wells have been installed at such distances previously but never with a direct control umbilical. Previous completions used a Subsea Control Module (SCM) or pod located in the wellhead. Reduced intervention costs are the typical driver for IWC in deep water applications, but water management is becoming an increasingly common application. The Roncador field development team has taken a novel approach by using IWC to manage water injection in an ultra deep water development. The challenge for the project team was to design an IWC system, which would accommodate the field infrastructure constraint, require minimal modification to the existing subsea hardware and ensure the necessary flexibility to locate surface equipment without the need for modification to the production facilities. The solution adopted for Roncador 35 is mainly based on an emerging ISO standard for the integration of IWC into Subsea Production Systems. The modular and expandable approach will enable extension of this solution to other wells in the Roncador field. (author)

Accessing offshoring advantages

DEFF Research Database (Denmark)

Mykhaylenko, Alona; Motika, Agnes; Wæhrens, Brian Vejrum

2015-01-01

. Assuming that different levels of synergy may exist between particular offshoring strategic decisions (choosing offshore outsourcing or captive offshoring and the type of function) and different offshoring advantages, this work advocates that the actual fact of realization of certain offshoring advantages...

Solution Proposals for Japan-Oriented Offshore Software Development in China

Science.gov (United States)

Zhang, Lei; Zhang, Xuan; Chai, Meiping; Tan, Yibing; Miyake, Shigeru; Taniguchi, Yoji; Hosoya, Jun; Mibe, Ryota

Surveys on the Japan-oriented vendors in China were conducted twice to find out the existent problems in the Japan-oriented offshore software development. From these survey results, four main problems were found out, which were the frequent requirement changes from the product owner, the misunderstanding of the requirement specification in the vendor side, the heavy overhead of the project management and the low-efficiency communication between the product owner and the vendor. Several solutions are proposed to solve these four problems, which mainly consist of the improvement of the offshore software development process and the development of the offshore development supporting tools. The proposed offshore development process is based on the application of the prototype development, the iteration development and the customer test driven development processes. The proposed offshore development supporting tools include the project management assistant tool and the communication assistant tool.

Loads on Entrance Platforms for Offshore Wind Turbines

DEFF Research Database (Denmark)

Frigaard, Peter; Andersen, Thomas Lykke; Ramirez, Jorge Robert Rodriguez

2010-01-01

The present paper gives an overview of the performed large scale tests in GWK, Hannover for studying wave run-up generated forces on wind turbine entrance platforms. The run-up height and velocity was measured by use of high speed video recordings supplemented by some wave gauges mounted at the p...

Frequency-domain characteristics of aerodynamic loads of offshore floating vertical axis wind turbines

DEFF Research Database (Denmark)

Borg, Michael; Collu, M.

2015-01-01

The re-emerging interest in vertical axis wind turbines for floating offshore applications has led to a need to investigate the relatively complex dynamics of such floating offshore structures. Through the use of a coupled model of dynamics this article investigates the frequency......-domain characteristics of floating vertical axis wind turbine aerodynamic loads. The impact of platform induced motion on aerodynamic loads is discussed in detail, with results indicating an increase in aerodynamic loads of several orders of magnitude over the range of frequencies usually containing significant wave...

Reverse logistics applied to offshore exploration drilling; A logistica reversa aplicada as operacoes de perfuracao exploratoria 'offshore'

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Paulo Roberto dos Santos; Silva, Douglas Resende Teixeira da [Repsol YPF Brasil S.A. - Unidade de Negocios. Exploracao e Producao(Brazil); Moyano, Ignacio Sanchez [Universidad Politecnica de Madrid (Spain); Ferreira Filho, Virgilio Jose Martins; Valle, Rogerio [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE)

2008-07-01

Reverse Logistic manages the return of resources and related information to production unities, after their use. Nowadays, it includes a special focus on environmental implications of used products, such as waste recycling or disposal. This paper considers the feasibility of reverse logistics for offshore exploration drilling activities, involving environmental aspects such as recycling, reuse of products after utilization and reduction of raw materials requirements. Although in Brazil the environmental licensing demands oil companies to have an organized management of their waste (requiring a total control over the final destination of the waste), costs and possible returns for waste management are considered negligible, in face of high oil prices and limited availability of offshore drilling rigs. Consequently, any potential benefit from its efficient management, or even reuse or trade, is not taken into account during the operation planning stage. The paper proposes Life Cycle Management as a continuous improvement management system aimed to minimize the environmental and socio-economic burdens associated with oil offshore production throughout its entire life cycle and value chain, that could provide cost-cuts such as a reduction in raw materials needs through reuse of waste, or even as a real income if selling the waste and/or recycled materials. (author)

Reduction of product platform complexity by vectorial Euclidean algorithm

International Nuclear Information System (INIS)

Navarrete, Israel Aguilera; Guzman, Alejandro A. Lozano

2013-01-01

In traditional machine, equipment and devices design, technical solutions are practically independent, thus increasing designs cost and complexity. Overcoming this situation has been tackled just using designer's experience. In this work, a product platform complexity reduction is presented based on a matrix representation of technical solutions versus product properties. This matrix represents the product platform. From this matrix, the Euclidean distances among technical solutions are obtained. Thus, the vectorial distances among technical solutions are identified in a new matrix of order of the number of technical solutions identified. This new matrix can be reorganized in groups with a hierarchical structure, in such a way that modular design of products is now more tractable. As a result of this procedure, the minimum vector distances are found thus being possible to identify the best technical solutions for the design problem raised. Application of these concepts is shown with two examples.

Offshore newcomer : world-scale megaproject spawns international-calibre skills and facilities

International Nuclear Information System (INIS)

Sorensen, D.

1997-01-01

The development of Hibernia marked the beginning of Newfoundland's booming oil industry. The offshore platform located 300 km offshore in the Grand Banks of Newfoundland has an estimated 615 million barrels of recoverable reserves to be produced at a projected average rate of 135,000 barrels per day. Newfoundland personnel and facilities acquired much expertise during the building of the offshore facility and are ready to enter the world market for oil and gas services and supplies. Newfoundland's biggest operations are the fabrication yards at Bull Arm and Marystown which have the capacity for steel fabrication, concrete construction, outfitting installation, hook-up and commissioning of industrial facilities. Plans are currently underway for the Terra Nova project. Newfoundland also has a strong labor force, with international calibre skills. The capacity is here, and as confidence in that capability increases, Newfoundland firms are beginning to form partnerships with international firms. 6 figs

Analysis of North Sea Offshore Wind Power Variability

NARCIS (Netherlands)

Buatois, A.; Gibescu, M.; Rawn, B.G.; Van der Meijden, M.A.M.M.

2014-01-01

This paper evaluates, for a 2030 scenario, the impact on onshore power systems in terms of the variability of the power generated by 81 GW of offshore wind farms installed in the North Sea. Meso-scale reanalysis data are used as input for computing the hourly power production for offshore wind

Building method (concreting) for an offshore platform equipped with several cantilevered pillars. Fremgangsmaate for fremstilling (stoeping) av en fralandsplattform som har flere mot hverandre hellende stoetteben

Energy Technology Data Exchange (ETDEWEB)

Olsen, O.

1985-07-29

The invention deals with a building method for an offshore platform made of concrete comprising several cantilevered pillars. In accordance with the invention, the building work is to be started in a dry dock, and can be completed in the same place or in deep water. The pillars and the foundation are made as separate structures. The foundation can also be made as separate structures for each of the pillars. The vertical positioned pillars are made by means of moving forms, and finally put into cantilevered position and permanently connected to the foundation and the upper end arrangement. The structure then is to be completed in the normal way. 7 drawings.

Development of a Terpenoid-Production Platform in Streptomyces reveromyceticus SN-593.

Science.gov (United States)

Khalid, Ammara; Takagi, Hiroshi; Panthee, Suresh; Muroi, Makoto; Chappell, Joe; Osada, Hiroyuki; Takahashi, Shunji

2017-12-15

Terpenoids represent the largest class of natural products, some of which are resources for pharmaceuticals, fragrances, and fuels. Generally, mass production of valuable terpenoid compounds is hampered by their low production levels in organisms and difficulty of chemical synthesis. Therefore, the development of microbial biosynthetic platforms represents an alternative approach. Although microbial terpenoid-production platforms have been established in Escherichia coli and yeast, an optimal platform has not been developed for Streptomyces species, despite the large capacity to produce secondary metabolites, such as polyketide compounds. To explore this potential, we constructed a terpenoid-biosynthetic platform in Streptomyces reveromyceticus SN-593. This strain is unique in that it harbors the mevalonate gene cluster enabling the production of furaquinocin, which can be controlled by the pathway specific regulator Fur22. We simultaneously expressed the mevalonate gene cluster and subsequent terpenoid-biosynthetic genes under the control of Fur22. To achieve improved fur22 gene expression, we screened promoters from S. reveromyceticus SN-593. Our results showed that the promoter associated with rvr2030 gene enabled production of 212 ± 20 mg/L botryococcene to levels comparable to those previously reported for other microbial hosts. Given that the rvr2030 gene encodes for an enzyme involved in the primary metabolism, these results suggest that optimized expression of terpenoid-biosynthetic genes with primary and secondary metabolism might be as important for high yields of terpenoid compounds as is the absolute expression level of a target gene(s).

Advanced Service Offshore Outsourcing

DEFF Research Database (Denmark)

Brandl, Kristin; Jensen, Peter D. Ørberg; Lind, Manya Jaura

2018-01-01

the capabilities, where the deficient development of one capability can be mitigated by the development of another capability (firm-internal determinants). Grounded in organization and service production theory, the paper contributes to the thematic literature on service offshoring and literature on organizational...

A Novel Platform for Evaluating the Environmental Impacts on Bacterial Cellulose Production.

Science.gov (United States)

Basu, Anindya; Vadanan, Sundaravadanam Vishnu; Lim, Sierin

2018-04-10

Bacterial cellulose (BC) is a biocompatible material with versatile applications. However, its large-scale production is challenged by the limited biological knowledge of the bacteria. The advent of synthetic biology has lead the way to the development of BC producing microbes as a novel chassis. Hence, investigation on optimal growth conditions for BC production and understanding of the fundamental biological processes are imperative. In this study, we report a novel analytical platform that can be used for studying the biology and optimizing growth conditions of cellulose producing bacteria. The platform is based on surface growth pattern of the organism and allows us to confirm that cellulose fibrils produced by the bacteria play a pivotal role towards their chemotaxis. The platform efficiently determines the impacts of different growth conditions on cellulose production and is translatable to static culture conditions. The analytical platform provides a means for fundamental biological studies of bacteria chemotaxis as well as systematic approach towards rational design and development of scalable bioprocessing strategies for industrial production of bacterial cellulose.

Soil-Structure Interaction for Non-Slender, Large-Diameter Offshore Monopiles

DEFF Research Database (Denmark)

Sørensen, Søren Peder Hyldal

Offshore wind power is a domestic, sustainable and largely untapped energy resource. Today, the modern offshore wind turbine offers competitive production prices compared to other sources of renewable energy. Therefore, it is a key technology in breaking the dependence on fossil fuels...... and in achieving the energy and climate goals of the future. For offshore wind turbines, the costs of foundation typically constitute 20-30% of the total costs. Hence, improved methods for the design of foundations for offshore wind turbines can increase the competitiveness of offshore wind energy significantly....... The monopile foundation concept has been employed as the foundation for the majority of the currently installed offshore wind turbines. Therefore, this PhD thesis concerns the soil-pile interaction for non-slender, large-diameter offshore piles. A combination of numerical and physical modelling has been...

Comparison of concentrations and profiles of polycyclic aromatic hydrocarbon metabolites in bile of fishes from offshore oil platforms and natural reefs along the California coast

Science.gov (United States)

Gale, Robert W.; Tanner, Michael J.; Love, Milton S.; Nishimoto, Mary M.; Schroeder, Donna M.

2012-01-01

To determine the environmental consequences of decommissioning offshore oil platforms on local and regional fish populations, contaminant loads in reproducing adults were investigated at seven platform sites and adjacent, natural sites. Specimens of three species (Pacific sanddab, Citharichthys sordidus; kelp rockfish, Sebastes atrovirens; and kelp bass, Paralabrax clathratus) residing at platforms and representing the regional background within the Santa Barbara Channel and within the San Pedro Basin were collected. Some of the most important contaminant classes related to oil operations are polycyclic aromatic hydrocarbons (PAHs) because of their potential toxicity and carcinogenicity. However, acute exposure cannot be related directly to PAH tissue concentrations because of rapid metabolism of the parent chemicals in fish; therefore, PAH metabolites in bile were measured, targeting free hydroxylated PAHs (OH-PAHs) liberated by enzymatic hydrolysis of the bound PAH glucuronides and sulfates. An ion-pairing method was developed for confirmatory analysis that targeted PAH glucuronides and sulfates. Concentrations of hydroxylated PAHs in all samples (76 fish from platforms and 64 fish from natural sites) were low, ranging from less than the limits of detection (5 to 120 nanograms per milliliter bile; 0.03 to 42 nanograms per milligram protein) to a maximum of 320 nanograms per milliliter bile (32 nanograms per milligram protein). A previously proposed dosimeter of PAH exposure in fish, 1-hydroxypyrene, was not detected at any platform site. Low concentrations of 1-hydroxypyrene were detected in 3 of 12 kelp rockfish collected from a natural reef site off Santa Barbara. The most prevalent OH-PAH, 2-hydroxyfluorene, was detected at low concentrations in seven fish of various species; of these, four were from two of the seven platform sites. The greatest concentrations of 2-hydroxyfluorene were found in three fish of various species from Platform Holly and were only

Far offshore wind conditions in scope of wind energy

NARCIS (Netherlands)

Holtslag, M.C.

2016-01-01

Far offshore atmospheric conditions are favourable for wind energy purposes since mean wind speeds are relatively high (i.e., high power production) while turbulence levels are relatively low (i.e., less fatigue loads) compared to onshore conditions. Offshore wind energy, however, is still expensive

Thermodynamic Performance Indicators for Offshore Oil and Gas Processing: Application to Four North Sea Facilities

DEFF Research Database (Denmark)

Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian

2014-01-01

Well-defined performance indicators can motivate optimal operation of offshore oil and gas platforms. We evaluate several thermodynamic performance indicators presented in the literature according to three criteria: Thermodynamic performance indicators should evaluate the use of technically...

Complex products and systems: potential from using lay out platforms

NARCIS (Netherlands)

Halman, Johannes I.M.; Hofer, Adrian P.

2004-01-01

In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates

Task 1: Whole-body concentrations of elements in kelp bass (Paralabrax clathratus), kelp rockfish (Sebastes atrovirens), and Pacific sanddab (Citharichthys sordidus) from offshore oil platforms and natural areas in the Southern California Bight

Science.gov (United States)

Love, Milton S.

2009-01-01

Resource managers are concerned that offshore oil platforms in the Southern California Bight may be contributing to environmental contaminants accumulated by marine fishes. To examine this possibility, 18 kelp bass (Paralabrax clathratus), 80 kelp rockfish (Sebastes atrovirens), and 98 Pacific sanddab (Citharichthys sordidus) were collected from five offshore oil platforms and 10 natural areas during 2005-2006 for whole-body analysis of 63 elements. The natural areas, which served as reference sites, were assumed to be relatively uninfluenced by contaminants originating from platforms. Forty-two elements were excluded from statistical comparisons for one of three reasons: they consisted of major cations that were unlikely to accumulate to potentially toxic concentrations under ambient exposure conditions; they were not detected by the analytical procedures; or they were detected at concentrations too low to yield reliable quantitative measurements. The remaining 21 elements consisted of aluminum, arsenic, barium, cadmium, chromium, cobalt, copper, gallium, iron, lead, lithium, manganese, mercury, nickel, rubidium, selenium, strontium, tin, titanium, vanadium, and zinc. Statistical comparisons of these 21 elements indicated that none consistently exhibited higher concentrations at oil platforms than at natural areas. Eight comparisons yielded significant interaction effects between total length (TL) of the fish and the two habitat types (oil platforms and natural areas). This indicated that relations between certain elemental concentrations (i.e., copper, rubidium, selenium, tin, titanium, and vanadium) and habitat type varied by TL of affected fish species. To better understand these interactions, we examined elemental concentrations in very small and very large individuals of affected species. Although significant interactions were detected for rubidium, tin, and selenium in kelp rockfish, the concentrations of these elements did not differ significantly between

Offshore oil production not significant polluter, says government report

Energy Technology Data Exchange (ETDEWEB)

Danenberger, E.P.

1977-11-01

Only 0.0028% of the oil produced in the Gulf of Mexico from 1971 through 1975 was spilled. World-wide, natural seeps introduce nearly 7 times more oil into the sea than offshore activity, while transportation, the worst offender, puts in 25 times more than offshore oil. The report includes data for spills of 50 bbl or less; about 85.5% of the total spill volume was from 5 of the 5857 incidents. In only one case was environmental damage reported, when minor amounts of oil reached 1000 ft of beach on the Chandeleur Islands after the 9/9/74 Cobia pipeline break. The report states that 50 ppm discharges cause no adverse effect, and that hydrocarbons in this concentration may even benefit microbial sea life.

Integration of Wave and Offshore Wind Energy in a European Offshore Grid

DEFF Research Database (Denmark)

Chozas, Julia Fernandez; Sørensen, H. C.; Korpås, M.

2010-01-01

of offshore renewable energy sources. According to this, the paper covers i) public and private initiatives for offshore transmission networks, ii) the synergies between the wave and the offshore wind energy sector within an offshore grid, iii) power transmission options for offshore generation and iv...

Conducting research in the middle of the ocean. Platforms FINO 1-3 supply planning data for utilising offshore wind energy in the North and Baltic Seas; Forschen mitten im Meer. Plattformen FINO 1-3 liefern Planungsdaten fuer die Offshore-Windenergienutzung in Nord- und Ostsee

Energy Technology Data Exchange (ETDEWEB)

Milles, Uwe

2011-07-01

In the future, a large part of Germany's electricity requirement is intended to come from offshore wind farms in order to utilise the favourable wind conditions there. This represents unknown territory in both technical and ecological terms, and is taking place in sensitive biotopes. Three largely remote-controlled research platforms have therefore been constructed in the North and Baltic Seas (FINO). In particular it is being investigated into how the wind actually behaves above the sea and how much electricity can be generated. The data will be incorporated into the planning, design and certification of future farms. (orig.)

Offshore field development. Statfjord - a geologist's dream: an economist's nightmare

Energy Technology Data Exchange (ETDEWEB)

1980-09-01

On September 3, 1980, the water injection module was lifted on board the Statfjord A platform. That marks the completion of the platform, a giant 3,000,000 bpd capacity monster of an offshore structure, carrying a price tag of $1.5 billion. Two more such giants are scheduled to follow, each costing approximately $2 billion in the North Sea's largest and most expensive offshore field development ever. Oil wells in the Statfjord field, the largest North Sea field to date, are now producing at up to 30,000 bpd each. The reservoir proves particularly open, and the filling of it is extremely good. Wells have produced up to 40,000 bpd, but with that kind of flow, sand problems occur. Gravel packs have had to be installed in several of the wells. Mobil's Dallas facilities have uncovered the fact that now dominates the Norwegian North Sea scene, i.e., the cut off point for gas reinjection into the Statfjord sand is late 1985. After that point a possible breakthrough of gas could block the oil or even damage the reservoir if reinjection is continued.

Dynamic performance of a novel offshore power system integrated with a wind farm

DEFF Research Database (Denmark)

Orlandini, Valentina; Pierobon, Leonardo; Schløer, Signe

2016-01-01

Offshore wind technology is rapidly developing and a wind farm can be integrated with offshore power stations. This paper considers as case study a futuristic platform powered by a wind farm and three combined cycle units consisting of a gas turbine and an ORC (organic Rankine cycle) module....... The first aim of this paper is to identify the maximum amount of wind power that can be integrated into the system, without compromising the electric grid balance. The stability of the grid is tested using a dynamic model of the power system based on first principles. Additionally, the dynamics...... of the system is compared with a simplified plant consisting of three gas turbines and a wind farm, in order to identify benefits of the installation of the ORC system. The maximum allowable wind power is 10 MW for a nominal platform load of 30 MW. The results show that the presence of the ORC system allows...

Dynamic performance of a novel offshore power system integrated with a wind farm

DEFF Research Database (Denmark)

Orlandini, Valentina; Pierobon, Leonardo; Schløer, Signe

2016-01-01

of the system is compared with a simplified plant consisting of three gas turbines and a wind farm, in order to identify benefits of the installation of the ORC system. The maximum allowable wind power is 10 MW for a nominal platform load of 30 MW. The results show that the presence of the ORC system allows......Offshore wind technology is rapidly developing and a wind farm can be integrated with offshore power stations. This paper considers as case study a futuristic platform powered by a wind farm and three combined cycle units consisting of a gas turbine and an ORC (organic Rankine cycle) module....... The first aim of this paper is to identify the maximum amount of wind power that can be integrated into the system, without compromising the electric grid balance. The stability of the grid is tested using a dynamic model of the power system based on first principles. Additionally, the dynamics...

Design and research on the platform of network manufacture product electronic trading

Science.gov (United States)

Zhou, Zude; Liu, Quan; Jiang, Xuemei

2003-09-01

With the rapid globalization of market and business, E-trading affects every manufacture enterprise. However, the security of network manufacturing products of transmission on Internet is very important. In this paper we discussed the protocol of fair exchange and platform for network manufacture products E-trading based on fair exchange protocol and digital watermarking techniques. The platform realized reliable and copyright protection.

Cyanobacteria as a platform for biofuel production

Directory of Open Access Journals (Sweden)

Nicole E Nozzi

2013-09-01

Full Text Available Cyanobacteria have great potential as a platform for biofuel production because of their fast growth, ability to fix carbon dioxide gas, and their genetic tractability. Furthermore they do not require fermentable sugars or arable land for growth and so competition with cropland would be greatly reduced. In this perspective we discuss the challenges and areas for improvement most pertinent for advancing cyanobacterial fuel production, including: improving genetic parts, carbon fixation, metabolic flux, nutrient requirements on a large scale, and photosynthetic efficiency using natural light.

Life cycle assessment of the offshore wind farm alpha ventus

International Nuclear Information System (INIS)

Wagner, Hermann-Josef; Baack, Christoph; Eickelkamp, Timo; Epe, Alexa; Lohmann, Jessica; Troy, Stefanie

2011-01-01

Due to better wind conditions at sea, offshore wind farms have the advantage of higher electricity production compared to onshore and inland wind farms. In contrast, a greater material input, leading to increased energy consumptions and emissions during the production phase, is required to build offshore wind farms. These contrary effects are investigated for the first German offshore wind farm alpha ventus in the North Sea. In a life cycle assessment its environmental influence is compared to that of Germany's electricity mix. In comparison to the mix, alpha ventus had better indicators in nearly every investigated impact category. One kilowatt-hour electricity, generated by the wind farm, was burdened with 0.137 kWh Primary Energy-Equivalent and 32 g CO 2 -Equivalent, which represented only a small proportion of the accordant values for the mix. Furthermore, the offshore foundations as well as the submarine cable were the main energy intensive components. The energetic and greenhouse gas payback period was less than one year. Therefore, offshore wind power, even in deep water, is compatible with the switch to sustainable electricity production relying on renewable energies. Additional research, taking backup power plants as well as increasingly required energy storage systems into account, will allow further calculation. -- Highlights: → Offshore wind energy represents an environmentally friendly way of power generation. → The offshore foundations and the submarine cable are energy intensive components. → Alpha ventus emits 30 g CO 2 per kWh electricity over the entire life cycle. → Less specific emissions occur in comparison to the existing German electricity grid. → The energetic and greenhouse gas payback periods are less than one year.

Optimization of surface network and platform location using a next generation reservoir simulator coupled with an integrated asset optimizer application to an offshore deep water oil field in Brazil; Otimizacao de redes de superficie e locacao da plataforma atraves do acoplamento de um simulador de reservatorios de nova geracao e um otmizador global de ativo: aplicacao em um campo offshore

Energy Technology Data Exchange (ETDEWEB)

Campozana, Fernando P.; Almeida, Renato L. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Madeira, Marcelo G.; Sousa, Sergio H.G. de; Spinola, Marcio [Halliburton Servicos Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

To design, modify, and expand surface facilities is a multidisciplinary task which involves substantial financial resources. It can take months or years to complete, depending on the size and level of detail of the project. Nowadays, the use of Next Generation Reservoir Simulators (NGRS) is the most sophisticated and reliable way of obtaining field performance evaluation since they can couple surface and subsurface equations, thus eliminating the need of lengthy multiphase flow tables. Furthermore, coupling a NGRS with an optimizer is the best way to accomplish a large number of simulation runs on the search for optimized solutions when facilities are being modified and/or expanded. The suggested workflow is applied to a synthetic field which reproduces typical Brazilian offshore deep water scenarios. Hundreds of coupled simulation runs were performed and the results show that it is possible to find optimal diameters for the production lines as well as the ideal location for the production / injection platform. (author)

Risk-based Reliability Assessment of Subsea Control module for Offshore Oil and Gas production

OpenAIRE

Umofia, Anietie Nnana

2014-01-01

Offshore oil and gas exploitation is principally conducted using dry or wet tree systems, otherwise called the subsea Xmas tree system. Due to the shift to deeper waters, subsea production system (SPS) has come to be a preferred technology with attendant economic benefits. At the centre of the SPS is the subsea control module (SCM), responsible for the proper functioning and monitoring of the entire system. With increasing search for hydrocarbons in deep and ultra-deepwaters...

Soil-Structure Interaction For Nonslender, Large-Diameter Offshore Monopiles

DEFF Research Database (Denmark)

Sørensen, Søren Peder Hyldal

Strong political and industrial forces, especially in Northern Europe, support the development of new technologies as well as improvements of existing technologies within the field of renewable energy. Offshore wind power is a domestic, sustainable and largely untapped energy resource. Today......, the modern offshore wind turbine offers competitive production prices compared to other sources of renewable energy. Therefore, it is a key technology in breaking the dependence on fossil fuels and in achieving the energy and climate goals of the future. For offshore wind turbines, the costs of foundation...... typically constitutes 20-30 % of the total costs. Hence, improved methods for the design of foundations for offshore wind turbines can increase the competitiveness of offshore wind energy significantly. The monopile foundation concept has been employed as the foundation for the majority of the currently...

The importance of the stimulation vessels in the Brazilian offshore basins: a history of technological evolution; A importancia dos barcos de estimulacao em bacias offshore brasileiras: uma historia de evolucao tecnologica

Energy Technology Data Exchange (ETDEWEB)

Torres, Ricardo S.; Prata, Fernando Gaspar M.; Dean, Gregory D. [BJ Services do Brasil Ltda., RJ (Brazil)

2004-07-01

The Campos Basin is known as one of the most challenging deep water basins in the world. Currently there are thirty-seven platforms, more than a thousand oil wells, and about 4200 kilometers of submarine pipelines, having produced more than 1,2 billion barrels of oil per year and 15,7 million cubic meters of gas per day. The Campos Basin is responsible for more than 80% of Brazil's national production. Brazil intends to produce 2,2 million barrels of oil per day by 2007, when it will reach self-sufficiency. Therefore, the continued development of the offshore basins, such as Campos, Santos and Espirito Santo will be critical to meet this goal. In this context, the technological evolution of the vessels that render stimulation services is of fundamental importance to improve job quality, reduce time, protect with the environment, enable efficient communication, and ensure operational viability of new techniques. This paper reports on the history of this vessels, describing and illustrating new and state-of-the-art technology, historical cases of pioneering operations, data transmission in real time and the benefits for offshore operators with a global vision. (author)

Canada's east coast offshore oil and gas industry: a backgrounder

International Nuclear Information System (INIS)

Bott, R.

1999-06-01

Another of the backgrounder series published by the Petroleum Communication Foundation, this booklet describes Canada's offshore oil and natural gas operations in the North Atlantic Ocean, specifically in the Hibernia (off Newfoundland, crude oil), Terra Nova (off Newfoundland, crude oil), Cohasset-Panuke (off Nova Scotia, crude oil) and Sable Island (off Nova Scotia, natural gas) fields. Together, these project represent an investment of more than 10 billion dollars and constitute a growing portion of Canada's 400,000 cubic metres of crude oil and natural gas liquids per day production. The booklet explains the importance of the offshore oil and natural gas industry to Canada, the benefits accruing to the maritime provinces locally, prospects for future offshore oil and natural gas development and provides a brief summary of each of the four current major projects. The booklet also provides an overview of the facilities required for offshore energy projects, environmental impacts and safeguards, exploration, drilling, production, processing and transportation aspects of offshore oil and gas projects. 9 refs, photos

State of the Art and Challenges for Offshore Integrated Multi-Trophic Aquaculture (IMTA

Directory of Open Access Journals (Sweden)

Bela H. Buck

2018-05-01

Full Text Available By moving away from coastal waters and hence reducing pressure on nearshore ecosystems, offshore aquaculture can be seen as a possible step towards the large-scale expansion of marine food production. Integrated multi-trophic aquaculture (IMTA in nearshore water bodies has received increasing attention and could therefore play a role in the transfer of aquaculture operations to offshore areas. IMTA holds scope for multi-use of offshore areas and can bring environmental benefits from making use of waste products and transforming these into valuable co-products. Furthermore, they may act as alternative marine production systems and provide scope for alternative income options for coastal communities, e.g., by acting as nodes for farm operation and maintenance requirements. This paper summarizes the current state of knowledge on the implications of the exposed nature of offshore and open ocean sites on the biological, technological and socio-economic performance of IMTA. Of particular interest is improving knowledge about resource flows between integrated species in hydrodynamic challenging conditions that characterize offshore waters.

MMSReefish Study Databases from 1993-1999 field collections (SEC7-95-11 Fish Mortalities From Explosive Removal of Petroleum Platforms)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Impacts of the Explosive Removal of Offshore Oil and Gas Structureson Fish Stocks in the Gulf of MexicoOffshore oil and gas platforms in the Gulf of Mexico (GOM)...

Dynamics and control of multi-terminal HVDC systems for off-shore wind farm integration

Energy Technology Data Exchange (ETDEWEB)

Ciapessoni, E.; Cirio, D.; Gatti, A.; Pitto, A. [Ricerca sul Sistema Energetico SpA (RSE), Milan (Italy)

2011-07-01

This paper addresses dynamic modelling aspects concerning the operation of VSC-based MTDC networks connecting large offshore wind farms to mainland AC system. In particular, stability issues of the AC-DC system under severe contingencies such as AC fault on mainland side, DC cable faults, and loss of offshore VSC terminal are analysed, and possible stabilising controls are identified. The propose model includes the basic and control strategies for converters on mainland and offshore side, and an additional global control which simulates the action of SPS-Special Protection System. Simulations are performed on a test system implemented in DIgSILENT Power Factory platform, including the proposed control systems and detailed models of wind turbine DFIGs. The work has been carried out within the FP7 European research project ''TWENTIES''. (orig.)

Reverse logistics applied to offshore exploration drilling; A logistica reversa aplicada as operacoes de perfuracao exploratoria 'offshore'

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Paulo Roberto dos Santos; Silva, Douglas Resende Teixeira da [Repsol YPF Brasil S.A. - Unidade de Negocios. Exploracao e Producao(Brazil); Moyano, Ignacio Sanchez [Universidad Politecnica de Madrid (Spain); Ferreira Filho, Virgilio Jose Martins; Valle, Rogerio [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE)

2008-07-01

Reverse Logistic manages the return of resources and related information to production unities, after their use. Nowadays, it includes a special focus on environmental implications of used products, such as waste recycling or disposal. This paper considers the feasibility of reverse logistics for offshore exploration drilling activities, involving environmental aspects such as recycling, reuse of products after utilization and reduction of raw materials requirements. Although in Brazil the environmental licensing demands oil companies to have an organized management of their waste (requiring a total control over the final destination of the waste), costs and possible returns for waste management are considered negligible, in face of high oil prices and limited availability of offshore drilling rigs. Consequently, any potential benefit from its efficient management, or even reuse or trade, is not taken into account during the operation planning stage. The paper proposes Life Cycle Management as a continuous improvement management system aimed to minimize the environmental and socio-economic burdens associated with oil offshore production throughout its entire life cycle and value chain, that could provide cost-cuts such as a reduction in raw materials needs through reuse of waste, or even as a real income if selling the waste and/or recycled materials. (author)

Ice monitoring program in support of Sakhalin Energy's offshore oil production

Energy Technology Data Exchange (ETDEWEB)

Pilkington, R. [CANATEC Associates International Ltd., Calgary, AB (Canada); Keinonen, A. [AKAC Inc., Victoria, BC (Canada); Tambovsky, V.; Ryabov, S. [Environmental Company of Sakhalin, Yuzhno-Sakhalinsk (Russian Federation); Pishchalnik, V. [Russian Academy of Science, Yuzhno-Sakhalinsk (Russian Federation)]|[Far East Geological Inst., Yuzhno-Sakhalinsk (Russian Federation). Sakhalin Dept.; Sheikin, I. [Arctic and Antarctic Research Inst., St. Petersburg (Russian Federation); Brovin, A. [ABIC Service Ltd., Calgary, AB (Canada)

2006-11-15

The Sakhalin Energy Investment Company (SEIC) has been producing oil at the Molikpaq platform off the east coast of Sakhalin Island since 1999. The Molikpaq oil production occurs during the open water summer season. When ice begins to form in late November, an Ice Management Team begins to monitor conditions at the site to ensure a safe operation. This paper described the ice monitoring program designed to provide extensive ice and environmental data to support risk management and allow the planning of safe oil production operations using a Single Anchor Leg Mooring( SALM) system, Floating Storage and Offloading System (FSO), and export tankers in ice. The following 2 key aspects of the in-ice operations were covered: ice management to protect the offshore loading operation on a minute by minute basis in moving ice, and also ice forecasting, to determine when any unmanageable ice might approach the tanker loading site and cause the shut down of operations in the fall and during the startup of operations in the spring. The forecasting of ice drift, ice formation and growth in the fall and ice decay in the spring were discussed. It was noted that in the last few years, the date on which ice first appears is getting later. Operations cease for the winter before the ice is forecast to become a problem for the operations. The Ice Management Team returns to the site in May when the ice melts and and is no longer harmful to the operations. The Ice Management Team consists of 9 individuals with several years of operational ice experience. Their tasks include data collection from satellite images; helicopter ice reconnaissance; ice breaker ice maps; radar ice maps and ice drift; and, ice drift analysis using terra MODIS satellite images. A daily or twice daily weather forecast is provided by a commercial weather forecasting company. These forecasts provide the winds, gusts, cloud cover, air temperature, wind wave and swell for every 6 hours for the first 3 days, then every

Western Newfoundland and Labrador offshore area strategic environmental assessment amendment

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-15

The Canada-Newfoundland and Labrador Offshore Petroleum Board issued a call for bids in May 2007 that included a piece of land in offshore western Newfoundland. This report presented an amendment to the 2005 western Newfoundland and Labrador offshore strategic environmental assessment (SEA) in order to extend the coverage of the previous piece of land and included additional lands southwest of the original SEA prepared in 2005. This report presented the objectives and purpose of the SEA amendment and the history of oil and gas activities in western Newfoundland and Labrador offshore area. It discussed the biological environment in terms of plankton; benthic invertebrates; fish and fisheries; marine-associated birds; marine mammals and sea turtles; species at risk; and potentially sensitive areas. Environmental effects of exploration and production activities were discussed in terms of sound; routine exploratory/delineation drilling and production activities; accidental events; and cumulative effects. Last, the report presented the conclusions including potential issues, data gaps, and planning considerations. It was concluded that petroleum exploration activity generally can proceed in the amendment area with the application of standard mitigation measures currently applied to offshore exploratory activities elsewhere in the Newfoundland offshore. 90 refs., 8 tabs., 18 figs., 1 appendix.

Western Newfoundland and Labrador offshore area strategic environmental assessment amendment

International Nuclear Information System (INIS)

2007-11-01

The Canada-Newfoundland and Labrador Offshore Petroleum Board issued a call for bids in May 2007 that included a piece of land in offshore western Newfoundland. This report presented an amendment to the 2005 western Newfoundland and Labrador offshore strategic environmental assessment (SEA) in order to extend the coverage of the previous piece of land and included additional lands southwest of the original SEA prepared in 2005. This report presented the objectives and purpose of the SEA amendment and the history of oil and gas activities in western Newfoundland and Labrador offshore area. It discussed the biological environment in terms of plankton; benthic invertebrates; fish and fisheries; marine-associated birds; marine mammals and sea turtles; species at risk; and potentially sensitive areas. Environmental effects of exploration and production activities were discussed in terms of sound; routine exploratory/delineation drilling and production activities; accidental events; and cumulative effects. Last, the report presented the conclusions including potential issues, data gaps, and planning considerations. It was concluded that petroleum exploration activity generally can proceed in the amendment area with the application of standard mitigation measures currently applied to offshore exploratory activities elsewhere in the Newfoundland offshore. 90 refs., 8 tabs., 18 figs., 1 appendix

Second wind in the offshore wind industry

International Nuclear Information System (INIS)

Philippe, Edouard; Neyme, Eric; Deboos, Christophe; Villageois, Jean-Remy; Gouverneur, Philippe; Gerard, Bernard; Fournier, Eric; Petrus, Raymond; Lemarquis, David; Dener, Marc; Bivaud, Jean-Pierre; Lemaire, Etienne; Nielsen, Steffen; Lafon, Xavier; Lagandre, Pierre; Nadai, Alain; Pinot de Villechenon, Edouard; Westhues, Markus; Herpers, Frederick; Bisiaux, Christophe; Sperlich, Miriam; Bales, Vincent; Vandenbroeck, Jan; His, Stephane; Derrey, Thierry; Barakat, Georges; Dakyo, Brayima; Carme, Laurent; Petit, Frederic; Ytournel, Sophie; Westhues, Markus; Diller, Armin; Premont, Antoine de; Ruer, Jacques; Lanoe, Frederic; Declercq, Jan; Holmager, Morten; Fidelin, Daniel; Guillet, Jerome; Dudziak, Gregory; Lapierre, Anne; Couturier, Ludovic; Audineau, Jean-Pierre; Rouaix, Eric; De Roeck, Yann-Herve; Quesnel, Louis; Duguet, Benjamin

2011-06-01

After several keynote addresses, this publication contains contributions and Power Point presentations proposed during this conference on the development of offshore wind energy. The successive sessions addressed the following issues: the offshore mass production of electricity (examples of Denmark and Belgium, laying and protecting offshore cables), the space, economic and environmental planning (the Danish experience, the role of the Coastal area integrated management, importance of the public debate, so on), the logistics of port infrastructures (simulation tools, example of Bremerhaven, issues related to project management), innovation at the core of industrial strategies (high power wind turbines, the 6 MW Alstom turbine, chain value and innovation in offshore wind energy, the Vertiwing innovating project of a floating wind turbine, a bench test in Charleston, foundations, gravity base structures, the British experience, the Danish experience), the economic and organisational conditions for development, the validation and certification of technologies

Offshore wind energy potential in China

DEFF Research Database (Denmark)

Hong, Lixuan; Möller, Bernd

2011-01-01

and economic costs. However, the influence of tropical cyclone risks on these regions and detailed assessments at regional or local scale are worth of further discussions. Nevertheless, the models and results provide a foundation for a more comprehensive regional planning framework that would address......This paper investigates available offshore wind energy resources in China’s exclusive economic zone (EEZ) with the aid of a Geographical Information System (GIS), which allows the influence of technical, spatial and economic constraints on offshore wind resources being reflected in a continuous...... space. Geospatial supply curves and spatial distribution of levelised production cost (LPC) are developed, which provide information on the available potential of offshore wind energy at or below a given cost, and its corresponding geographical locations. The GIS-based models also reflect the impacts...

Bringing the Offshore Ashore : Transnational Production, Industrial Relations and the Reconfiguration of Sovereignty

NARCIS (Netherlands)

Lillie, Nathan

This article argues that off-shore is losing its exceptionality by being absorbed into a broader process of variegation and deterritorialization of sovereignty, and that capital's search for a new "fix" is driving this process. Capital goes off-shore by exploiting non-territorial definitions of

Offshore Wind Energy Systems Engineering Curriculum Development

Energy Technology Data Exchange (ETDEWEB)

McGowan, Jon G. [Univ. of Massachusetts, Amherst, MA (United States); Manwell, James F. [Univ. of Massachusetts, Amherst, MA (United States); Lackner, Matthew A. [Univ. of Massachusetts, Amherst, MA (United States)

2012-12-31

Utility-scale electricity produced from offshore wind farms has the potential to contribute significantly to the energy production of the United States. In order for the U.S. to rapidly develop these abundant resources, knowledgeable scientists and engineers with sound understanding of offshore wind energy systems are critical. This report summarizes the development of an upper-level engineering course in "Offshore Wind Energy Systems Engineering." This course is designed to provide students with a comprehensive knowledge of both the technical challenges of offshore wind energy and the practical regulatory, permitting, and planning aspects of developing offshore wind farms in the U.S. This course was offered on a pilot basis in 2011 at the University of Massachusetts and the National Renewable Energy Laboratory (NREL), TU Delft, and GL Garrad Hassan have reviewed its content. As summarized in this report, the course consists of 17 separate topic areas emphasizing appropriate engineering fundamentals as well as development, planning, and regulatory issues. In addition to the course summary, the report gives the details of a public Internet site where references and related course material can be obtained. This course will fill a pressing need for the education and training of the U.S. workforce in this critically important area. Fundamentally, this course will be unique due to two attributes: an emphasis on the engineering and technical aspects of offshore wind energy systems, and a focus on offshore wind energy issues specific to the United States.

Global long-term cost dynamics of offshore wind electricity generation

NARCIS (Netherlands)

Gernaat, David E H J; Van Vuuren, Detlef P.; Van Vliet, Jasper; Sullivan, Patrick; Arent, Douglas J.

2014-01-01

Using the IMAGE/TIMER (The Targets IMage Energy Regional) long-term integrated assessment model, this paper explores the regional and global potential of offshore wind to contribute to global electricity production. We develop long-term cost supply curve for offshore wind, a representation of the

Energy Usage of Residents on Offshore Islands in Taiwan

Directory of Open Access Journals (Sweden)

Szu-Cheng Lu

2015-05-01

Full Text Available A field study was conducted through interviews on offshore islands in Taiwan to investigate the energy usage of local residents. A comparison of household appliance usage in mainland Taiwan with that on the offshore islands revealed that, overall, the most commonly used household appliances are steam cookers/rice cookers, water dispensers, and washing machines. For other household appliances, Levels 2 and 3 offshore isles have lower use penetration rates compared with those in mainland Taiwan and on Level 1 offshore isles, particularly for the use of computers. By contrast, the use penetration rate for chest freezers on Levels 2 and 3 offshore isles is high, and each household has one or more freezers on average. This appliance is not a commonly observed household product in mainland Taiwan or on Level 1 offshore isles. Furthermore, because of the government policy, every household on parts of Level 2 offshore isles and on all Level 3 offshore isles has a fixed monthly charge of electricity. The transportation of liquefied petroleum gas is also inconvenient, and the gas price is slightly higher, leading to the tendency of residents to consume excessive amounts of electrical energy, which does not correspond with the aim of the government to conserve energy and reduce carbon emissions; thus, the relevant authorities’ review and improvement on energy consumption on Levels 2 and 3 offshore isles are required.

Versatile microscale screening platform for improving recombinant protein productivity in Chinese hamster ovary cells

DEFF Research Database (Denmark)

Hansen, Henning Gram; Nilsson, Claes Nymand; Lund, Anne Mathilde

2015-01-01

to reduce production costs significantly. The aim of this study was to establish a versatile target gene screening platform for improving productivity for primarily non-mAb glycoproteins with complete interchangeability of model proteins and target genes using transient expression. The platform consists...

Optimal Risk-Based Inspection Planning for Offshore Wind Turbines

DEFF Research Database (Denmark)

Rangel-Ramirez, Jose G.; Sørensen, John Dalsgaard

2008-01-01

, inspection and maintenance activities are developed. This paper considers aspects of inspection and maintenance planning of fatigue prone details in jacket and tripod types of wind turbine support structures. Based oil risk-based inspection planning methods used for oil & gas installations, a framework......Wind turbines for electricity production have increased significantly the last years both in production capability and size. This development is expected to continue also in the coining years. The Support structure for offshore wind turbines is typically a steel structure consisting of a tower...... for optimal inspection and maintenance planning of offshore wind turbines is presented. Special aspects for offshore wind turbines are considered: usually the wind loading are dominating the wave loading, wake effects in wind farms are important and the reliability level is typically significantly lower than...

Gaining Flexibility and Innovation through Offshore Outsourcing

Directory of Open Access Journals (Sweden)

Michela Pellicelli

2018-05-01

Full Text Available Recently, offshore outsourcing has become extremely important for companies that compete worldwide. In many industries, only companies that manage to be competitive globally can aspire to attain sustainable competitive advantages. Therefore, offshore outsourcing has become essential for many companies and recently has become more and more a vital part of the long-term strategies of the leading firms. The rapidly shifting conditions in the marketplace is forcing management to constantly review and defend its core competencies. Management is now confronted with a higher level of complexity and disruptions brought about in particular by the new waves of globalization and the irresistible march of technological changes. For these reasons, offshore outsourcing is transforming the functions of the traditional firms into a network of competencies. The tendency to offshore most of the productive and economic activities and processes can lead companies to transform themselves into virtual organizations, where all the functions could be outsourced through the formation of flexible networks and agile organizational structures.

Microbial platform technology for recombinant antibody fragment production: A review.

Science.gov (United States)

Gupta, Sanjeev Kumar; Shukla, Pratyoosh

2017-02-01

Recombinant antibody fragments are being used for the last few years as an important therapeutic protein to cure various critical and life threatening human diseases. Several expression platforms now days employed for the production of these recombinant fragments, out of which bacterial system has emerged a promising host for higher expression. Since, a small antibody fragment unlike full antibody does not require human-like post-translational modification therefore it is potentially expressed in prokaryotic production system. Recently, small antibody fragments such as scFvs (single-chain variable fragments) and Fabs (antibody fragments) which does not require glycosylation are successfully produced in bacteria and have commercially launched for therapeutic use as these fragments shows better tissue penetration and less immunogenic to human body compared to full-size antibody. Recently developed Wacker's ESETEC secretion technology is an efficient technology for the expression and secretion of the antibody fragment (Fab) exceeded up to 4.0 g/L while scFv up to 3.5 g/L into the fermentation broth. The Pfenex system and pOP prokaryotic expression vector are another platform used for the considerably good amount of antibody fragment production successfully. In this review, we summarize the recent progress on various expression platforms and cloning approaches for the production of different forms of antibody fragments in E. coli.

Implementing a product platform in 35 man-days:

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Pedersen, Rasmus; Nielsen, Ole Fiil

2008-01-01

benefits are reduced costs, reduced lead time and increased ability to focus engineering resources on aspects providing value to the customer. A so-called visual approach has been utilised. By means of a Product Family Master Plan, the content and scope of the platform have been modelled and visualised...

Noise and Vibrations Measurements. External noise and vibrations measurements for offshore SODAR application

International Nuclear Information System (INIS)

Ormel, F.T.; Eecen, P.J.; Herman, S.A.

2003-10-01

The partners in the WISE project investigate whether application of the SODAR (sonic detection and ranging) measurement technique in wind energy experimental work is feasible as a replacement for cup anemometers, wind direction sensors and tall meteorological masts. In Work Package 2 of the WISE project extensive controlled experiments with the SODAR are performed. For example SODAR measurements are compared with measurements from nearby masts and different brands of SODARs are compared. Part of the work package is the measurement of vibration and noise on an offshore SODAR system. The results of these measurements are presented in this report. ECN performed measurements at an offshore location to investigate the influence of noise and vibrations on the performance of a MiniSODAR measurement system. The aim of the measurements is to quantify the effect of these external noise and vibrations disturbances on the MiniSODAR's performance. Measurements on an identical SODAR system onshore are carried out to compare the disturbances of offshore and onshore external conditions. The effect of background noise on SODAR operation has clearly been established in literature. Therefore, measurements have been performed only to establish the absolute sound pressure levels. This is done at the Measuring Platform Noordwijk (MPN) located in the North Sea, nine kilometres out of the coast at Noordwijk, The Netherlands, and at two locations onshore. At the MPN-platform, the SODAR has been moved from the middle deck to the upper deck to diminish the influence of the diesel generator needed for the electric powering of the island. Although the absolute sound pressure level became higher at the new location, this level became lower at the most important frequencies inside the SODAR, due to the use of absorbing foam. With regards to the sound pressure level the move improved the situation. The sound pressure levels measured offshore were 6 to 15 dB higher than for the two locations

76 FR 79206 - Commercial Renewable Energy Transmission on the Outer Continental Shelf (OCS) Offshore Mid...

Science.gov (United States)

2011-12-21

...-circuit, high-voltage direct current (HVDC) transmission line that would collect power generated by wind...-voltage alternating current into HVDC using voltage sourced converters. Each offshore converter platform... transmission grid at up to seven locations where AWC terrestrial converter stations would convert the HVDC...

Occupational health offshore

Energy Technology Data Exchange (ETDEWEB)

Crosbie, A.; Davies, F.

2002-07-01

The proceedings contain the 29 papers presented at the conference plus the opening address from the chair of the Health and Safety Commission. The papers in the first session were concerned with policy, strategy and leadership and included a perspective from the offshore industry advisory committee, details of a health planning tool for occupational health assurance and lessons from occupational health management in the offshore sector. The two sessions on the second day dealt with occupational health in the offshore design process and case studies involving physical, chemical and biological agents. Topics included the need to consider occupational health when designing offshore installations, the development of a human factors engineering strategy in petrochemical engineering projects, measuring occupational exposure to hazardous chemicals, implementation of the noise at work regulations, hand arm vibration syndrome and issues with potable water maintenance. The two sessions on the third day were concerned with human factors and psychological health, and well-being and fitness for duty. Topics covered included circadian adaption to shift change in offshore shift workers, managing stress in the offshore environment, the role of employee assistance programmes in organisational stress management, health care and first aid (the revised ACOP), well-being at work, the medical and physical fitness of offshore emergency response rescue team members, the impact of health surveillance and promotion of offshore accident rates, and the implication of safety and heath of the aging of the workforce ion the Norwegian offshore industry.

NCEL (Naval Civil Engineering Lab.) Ocean Platforms Seminar.

Science.gov (United States)

1983-11-01

Ido (11a) -. 0 3 -,2 21 C1 = (2UmT/T D)/(pDUm L) f Fm sin(e) de (11b) 0 where F mL = measured force per unit length, CT = 1+C, Cm being the added mass...located around the perimeter of the jacket’s base. These structures are fabricated onshore and then skidded onto a barge, transported offshore...type platforms. Both Cerveza and the Cerveza Ligera platforms[ 7] were launched in one piece and installed in 935 ft and 925 ft of water respectively

The fatigue and corrosion fatigue behavior of welded Inconel 625 alloy employed in off-shore platforms; Avaliacao do comportamento a fadiga e a corrosao-fadiga de juntas soldadas da liga Inconel 625 testada para uso em plaaformas off-shore

Energy Technology Data Exchange (ETDEWEB)

Pfingstag, M.E.; Schroeder, R.M.; Mueller, I.L. [Universidade Federal do Rio Grande do Sul (LAPEC/UFRGS), Porto Alegre, RS (Brazil). Dept. de Metalurgia. Lab. de Pesquisa em Corrosao], e-mail: maiquel10@walla.com

2006-07-01

The fatigue and corrosion fatigue behavior of welded Inconel 625 employed live like risers in off-shore platforms was studied. These risers may be employed integrally of this alloy, or combined with API 52 X60 steel in the form of 'Clads'. One of the most susceptible points in .these structures is the circumferential weld that joint the pipes together. In these regions, stresses and defects are generated by the welding process, and these material remind in contact with aggressive species like, chlorides and Co{sub 2} . Polarization curves, slow strain rate fatigue and corrosion fatigue tests were used to characterize the Inconel alloy behavior. In the welded deposit condition, this alloy shows an excellent resistance corrosion and a good fatigue and corrosion-fatigue behavior.(author)

Experimental on-line platform for product conceptual design: OpenDesigNet

Directory of Open Access Journals (Sweden)

Teresa Magal-Royo

2013-09-01

Full Text Available This paper highlights the need for using specialised on-line collaborative environments by designers and product engineers who increasingly use Web 2.0 technology to search for information. Although there are professional channels and networks, there is no specific platform which helps during a new product’s conceptualisation phase. Open communication must thus be promoted and encouraged amongst design professionals and companies to form working groups thereby allowing them to work collaboratively in the most open and creative phase of product design, i.e. conceptualisation. The OpenDesigNet (ODN experimental platform has been developed so that designers and small- or medium-sized companies (SMC can access on-line collaborative tools to support the creation and promotion of new on-line products and assess their immediate social impact. This article presents some of the results obtained during the validation phase involving a platform satisfaction survey of design engineering students and has led to a first-hand assessment of the new platform’s potential impact on their professional future.

Developing an Indicator System for Measuring the Social Sustainability of Offshore Wind Power Farms

Directory of Open Access Journals (Sweden)

Tzay-An Shiau

2016-05-01

Full Text Available Taiwan’s government has promoted investment in an offshore wind power farm, and local fishermen have protested. A social impact assessment (SIA has examined the impact of the proposed offshore wind power farm on all stakeholders. The main objective of the present study was to develop an indicator system for measuring the social sustainability of offshore wind power farms; this study also reports on the particular case of Taiwan’s offshore wind power project. This study began by defining 35 social sustainability indicators and selecting 23 representative indicators by using rough set theory. Subsequently, 14 key indicators were constructed using the social construction of technology (SCOT method. Finally, we developed a social impact index for evaluating the social sustainability of offshore wind power farms by using the analytic network process and Dempster-Shafer theory. Our social impact index yields a total score of 0.149 for Taiwan’s pilot offshore wind power project; this result indicates that the pilot project is socially sustainable. A substantial contradiction exists between the fishermen’s protest and the results of the social impact assessment. The findings can assist the government in building a coordination platform for the investors and the fishermen. Government regulation is necessary to set boundaries for fishing areas that protect both the fishermen’s and investors’ rights.

Implementation of a pollution control projects as a mitigating measure for the environmental impacts in UN-RIO production platforms; Implementacao de um projeto de controle da poluicao como medida mitigadora de impactos ambientais em plataformas de producao da UN-RIO

Energy Technology Data Exchange (ETDEWEB)

Coelho, Ana Paula A.; Machado, Mariana E.R.; Rocha, Valmir G. da [PETROBRAS, Rio de Janeiro, RJ (Brazil). Unidade de Negocio de Exploracao e Producao

2004-07-01

The activity of offshore oil and gas exploration and production (E and P) has the potential to cause environmental impacts, mainly due to the nature of the products involved. Therefore, it is of fundamental importance that all possible impacts derived from this activity be identified so that mitigating measures can be taken. The work described here proposes, as a mitigating measure for some of the more relevant environmental impacts related to the offshore E and P activity, the implementation of a Pollution Control Project at UN-RIO's oil and gas platforms. The Project includes actions for the adequate environmental management of the atmospheric emissions, effluents and solid residues generated during oil and gas production activities. The Project also proposes actions related to the monitoring of relevant parameters during the operations, the elaboration of operational procedures for the pollution control systems and equipment, a preventive equipment maintenance policy and the training in standard procedures for critical activities. Therefore, the implementation of such a Project is intrinsically related to the maintenance of the environmental quality in the area where UN-RIO's E and P activities take place. (author)

Offshore Financial Centers in Global Capital Flow

Directory of Open Access Journals (Sweden)

Lutsyshyn Zoriana

2017-12-01

Full Text Available The article is dedicated to investigation of the place and role of offshore financial centers in financial globalization system, and of the reasons for using offshores in assets securitization mechanism. Numerous offshore and other preferential zones enabling to avoid the effective national and governmental tax regime are important attributes of global financial system and redistributive links of world financial flows. At present, around 70 countries and territories offer their offshore services for foreign capital, bank transactions, profitability from activities in financial markets proper. The global offshore business concentrates large amounts often having no relation to the country of origin, the so-called cosmopolitan capital (wandering. Although in the early 80's of the XXth century offshore companies were considered to control approximately 500 billion dollars, it was already in the early 90's that this amount doubled and was estimated as 1 trillion dollars. Today, from ⅓ to half of the world capital turnover goes through offshore business channels, and therefore, almost half of non-resident bank deposits are concentrated in world offshore centers. These are the world financial centers comprising international capital markets that provide for the accumulation and redistribution of world capital. From the process of reproduction (circulation of capital, the world financial centers plunge out the most homogeneous and mobile element — money, and freely manipulating with them, concentrate huge economic power in their hands. The role of world financial centers was also enhanced by the latest achievements in computer science, allowing execution of instant transactions and movement of huge amounts to any point of the world within the shortest possible time. The world financial centers consist not only of powerful banks and financial institutions operating on the international scene, but also have currency, stock and other exchanges as their

Offshore Investment Funds

Directory of Open Access Journals (Sweden)

Shang-Jin Wei

1999-12-01

Full Text Available Offshore investment funds are alleged to have engaged in trading behavior that is different from their onshore counterparts because they may be subject to less supervision and regulation. In particular, they may trade more intensely. They could also pursue more aggressively certain trading strategies such as positive feedback trading or herding that could contribute to a greater volatility in the market. Using a unique data set, this chapter compares the trading behavior in the Korean stock market between offshore investment funds with their onshore counterparts registered in the US and UK. There are a number of interesting findings. First, there is indeed evidence suggesting that the offshore funds trade more intensely than their onshore counterparts. Second, however, there is no evidence that the offshore funds engage in positive feedback trading. In contrast, there is strong evidence that the funds from the U.S. and U.K. do. Third, while offshore funds do herd, they do so far less than onshore funds in the U.S. or UK. Fourth, offshore funds hold less glamour stocks (e.g. stocks with high P/E in their portfolio than funds in the U.S. or U.K. do. Moreover, flight to glamour stocks during the in-crisis period is less evident in the case of offshore funds. In sum, offshore funds are no especially worrisome monsters.

First evaluation of foraminiferal metabarcoding for monitoring environmental impact from an offshore oil drilling site

KAUST Repository

Laroche, Olivier

2016-08-29

At present, environmental impacts from offshore oil and gas activities are partly determined by measuring changes in macrofauna diversity. Morphological identification of macrofauna is time-consuming, expensive and dependent on taxonomic expertise. In this study, we evaluated the applicability of using foraminiferal-specific metabarcoding for routine monitoring. Sediment samples were collected along distance gradients from two oil platforms off Taranaki (New Zealand) and their physicochemical properties, foraminiferal environmental DNA/RNA, and macrofaunal composition analyzed. Macrofaunal and foraminiferal assemblages showed similar shifts along impact gradients, but responded differently to environmental perturbations. Macrofauna were affected by hypoxia, whereas sediment grain size appeared to drive shifts in foraminifera. We identified eight foraminiferal molecular operational taxonomic units that have potential to be used as bioindicator taxa. Our results show that metabarcoding represents an effective tool for assessing foraminiferal communities near offshore oil and gas platforms, and that it can be used to complement current monitoring techniques. (C) 2016 Elsevier Ltd. All rights reserved.

First evaluation of foraminiferal metabarcoding for monitoring environmental impact from an offshore oil drilling site

KAUST Repository

Laroche, Olivier; Wood, Susanna A.; Tremblay, Louis A.; Ellis, Joanne; Lejzerowicz, Franck; Pawlowski, Jan; Lear, Gavin; Atalah, Javier; Pochon, Xavier

2016-01-01

At present, environmental impacts from offshore oil and gas activities are partly determined by measuring changes in macrofauna diversity. Morphological identification of macrofauna is time-consuming, expensive and dependent on taxonomic expertise. In this study, we evaluated the applicability of using foraminiferal-specific metabarcoding for routine monitoring. Sediment samples were collected along distance gradients from two oil platforms off Taranaki (New Zealand) and their physicochemical properties, foraminiferal environmental DNA/RNA, and macrofaunal composition analyzed. Macrofaunal and foraminiferal assemblages showed similar shifts along impact gradients, but responded differently to environmental perturbations. Macrofauna were affected by hypoxia, whereas sediment grain size appeared to drive shifts in foraminifera. We identified eight foraminiferal molecular operational taxonomic units that have potential to be used as bioindicator taxa. Our results show that metabarcoding represents an effective tool for assessing foraminiferal communities near offshore oil and gas platforms, and that it can be used to complement current monitoring techniques. (C) 2016 Elsevier Ltd. All rights reserved.

NDSI products system based on Hadoop platform

Science.gov (United States)

Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

2015-12-01

Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

Floating Foundations for Offshore Wind Turbines

DEFF Research Database (Denmark)

Andersen, Morten Thøtt

The concept of harnessing the power of the wind dates all the way back to the first ships traversing the seas. Later, windmills enabled the use of wind power for industrial purposes. Since then, technology has allowed the production of clean renewable energy through the use of wind turbines....... These turbines have traditionally been placed on land, but several factors have urged a move to offshore locations. Now the boundaries are being pushed into deeper and deeper waters, where the idea of floating offshore wind turbines has emerged. In less than a decade, these have gone from scattered small...

Subsea prizes : companies pushing the envelope offshore

Energy Technology Data Exchange (ETDEWEB)

Macedo, R.

2009-06-15

In order to make projects economic, companies are going farther offshore and deeper to find oil and gas or to use existing offshore platforms and longer horizontals. Companies such as StatoilHydro are reworking strategies on how to approach future oil finds. This article discussed examples of ultra deep and long horizontal oil finds such as Statoil's complicated but highly successful Gulltopp project. Although drilling ultra-deep wells or long horizontal wells is risky, they can also be very lucrative. The article also discussed McMoRan Exploration Company of New Orleans' high-risk deeper targets in the Gulf of Mexico and its exploration strategy. The longest well in the world, drilled by Maersk Oil Qatar AS was also described. The article noted that the Danish company reported that the entire horizontal section of the well was placed within a reservoir target which was only 20 feet thick. Schlumberger helped Maersk Oil Qatar break several records with extended reach drilling (ERD) offshore well. This well set 10 records, including the longest well ever drilled; longest along-hole departure; longest 8 and a half inch section; highest ERD ratio; highest directional drilling difficulty index; deepest directional control; deepest downlink, MWD transmission and LWD geosteering; deepest battery-less operation; longest reservoir contact; and longest open hole. Last, the article discussed an unsuccessful well drilled by Murphy Oil Corporation known as the Manhattan well. 8 figs.

Tuno Knob Offshore Wind Farm

International Nuclear Information System (INIS)

Madsen, P.S.

1996-01-01

In 1995 Midtkraft Power Company built Denmark's second offshore wind farm as a demonstration project. The project purpose is first of all to investigate the environmental aspects of offshore wind energy. The two primary objects are to study the impact on bird life and to test different methods for predicting the visual effect. The wind farm consists of 10 pitch-regulated Vestas V39 500 kW wind turbines placed on box caisson foundations in a shallow water area 6 km east of Jutland. The project has been implemented successfully under a very narrow time schedule, and during the first 6 months in operation, the production has been approx. 30% higher than expected. (author)

Evaluating stress analysis and failure criteria for offshore structures for Pechora Sea conditions

Science.gov (United States)

Nesic, S.; Donskoy, Y.; Zolotukhin, A.

2017-12-01

Development of Arctic hydrocarbon resources has faced many challenges due to sensitive environmental conditions including low temperatures, ice cover and terrestrial permafrost and extreme seasonal variation in sunlight. Russian offshore field development in Arctic region is usually associated with annual ice cover, which can cause serious damage on the offshore platforms. The Pechora Sea has claimed as one of the most perspective oil and gas region of the Russian Arctic with seven discovered oil and gas fields and several dozens of structures. Our rough assessment, based on in-place hydrocarbon volumes and recovery factor evaluation concept, indicates that Pechora Sea alone has in-place volumes amounting to ca. 20 billion barrel oil equivalent (BOE). This quantity is enough to secure produced volumes by 2040 exceeding 3 billion BOE [1] that indicates huge resource potential of the region. The environmental conditions are primarily function of water dynamics and ice cover. The sea is covered by the ice for greatest part of the year. In this article, the ice load simulations were performed using explicit dynamic analysis system in ANSYS software to determine best shape and size of an offshore platform for the Pechora Sea ice conditions. Different gravity based structures (GBS) were analyzed: artificial island, hollow cylindrical and conical concrete structures and four-leg GBS. Relationships between the stress, deformations and time were analyzed and important observations from the simulation results were a basis for selecting the most preferable structures.

Whether and What to Offshore?

DEFF Research Database (Denmark)

Jensen, Peter Ørberg; Pedersen, Torben

In this article, we explore the idea that offshoring of services and technical work should be regarded as a dynamic process that evolves over time. Firms gradually move from offshoring of simple, standardized activities towards offshoring of advanced activities when they accumulate experience...... with offshoring, and this type of offshoring comes with an entirely different set of characteristics compared to traditional, cost-seeking offshoring. Based on a unique survey among the total population of firms in the eastern region of Denmark, we analyze some of the dynamics of this process through a model...... that incorporates two different aspects of the process of offshoring. First, we approach the question of whether to offshore and establish a baseline that investigates the determinants of firms’ participation—or lack thereof—in offshoring. Secondly, we approach the question of what to offshore and the subsequent...

Including impacts of particulate emissions on marine ecosystems in life cycle assessment: the case of offshore oil and gas production.

Science.gov (United States)

Veltman, Karin; Huijbregts, Mark A J; Rye, Henrik; Hertwich, Edgar G

2011-10-01

Life cycle assessment is increasingly used to assess the environmental performance of fossil energy systems. Two of the dominant emissions of offshore oil and gas production to the marine environment are the discharge of produced water and drilling waste. Although environmental impacts of produced water are predominantly due to chemical stressors, a major concern regarding drilling waste discharge is the potential physical impact due to particles. At present, impact indicators for particulate emissions are not yet available in life cycle assessment. Here, we develop characterization factors for 2 distinct impacts of particulate emissions: an increased turbidity zone in the water column and physical burial of benthic communities. The characterization factor for turbidity is developed analogous to characterization factors for toxic impacts, and ranges from 1.4 PAF (potentially affected fraction) · m(3) /d/kg(p) (kilogram particulate) to 7.0 x 10³ [corrected] for drilling mud particles discharged from the rig. The characterization factor for burial describes the volume of sediment that is impacted by particle deposition on the seafloor and equals 2.0 × 10(-1) PAF · m(3) /d/kg(p) for cutting particles. This characterization factor is quantified on the basis of initial deposition layer characteristics, such as height and surface area, the initial benthic response, and the recovery rate. We assessed the relevance of including particulate emissions in an impact assessment of offshore oil and gas production. Accordingly, the total impact on the water column and on the sediment was quantified based on emission data of produced water and drilling waste for all oil and gas fields on the Norwegian continental shelf in 2008. Our results show that cutting particles contribute substantially to the total impact of offshore oil and gas production on marine sediments, with a relative contribution of 55% and 31% on the regional and global scale, respectively. In contrast, the

Fundamental framework toward optimal design of product platform for industrial three-axis linear-type robots

Directory of Open Access Journals (Sweden)

Kana Sawai

2015-07-01

Full Text Available This paper discusses an optimization-based approach for the design of a product platform for industrial three-axis linear-type robots, which are widely used for handling objects in manufacturing lines. Since the operational specifications of these robots, such as operation speed, working distance and orientation, weight and shape of loads, etc., will vary for different applications, robotic system vendors must provide various types of robots efficiently and effectively to meet a range of market needs. A promising step toward this goal is the concept of a product platform, in which several key elements are commonly used across a series of products, which can then be customized for individual requirements. However the design of a product platform is more complicated than that of each product, due to the need to optimize the design across many products. This paper proposes an optimization-based fundamental framework toward the design of a product platform for industrial three-axis linear-type robots; this framework allows the solution of a complicated design problem and builds an optimal design method of fundamental features of robot frames that are commonly used for a wide range of robots. In this formulation, some key performance metrics of the robot are estimated by a reduced-order model which is configured with beam theory. A multi-objective optimization problem is formulated to represent the trade-offs among key design parameters using a weighted-sum form for a single product. This formulation is integrated into a mini–max type optimization problem across a series of robots as an optimal design formulation for the product platform. Some case studies of optimal platform design for industrial three-axis linear-type robots are presented to demonstrate the applications of a genetic algorithm to such mathematical models.

Geriatric infrastructure, BRAC, and ecosystem service markets? End-of-life decisions for dams, roads, and offshore platforms (Invited)

Science.gov (United States)

Doyle, M. W.

2010-12-01

US infrastructure expanded dramatically in the mid-20th century, and now includes more than 79,000 dams, 15,000 miles of levees, 3.7 million miles of roads, 600,000 miles of sewer pipe, 500,000 onshore oil wells, and over 4,000 offshore oil platforms. Many structures have been in place for 50 years or more, and an increasing portion of national infrastructure is approaching or exceeding its originally intended design life. Bringing national infrastructure to acceptable levels would cost nearly 10% of the US annual GDP. Decommissioning infrastructure can decrease public spending and increase public safety while facilitating economic expansion and ecological restoration. While most infrastructure remains critical to the national economy, a substantial amount is obsolete or declining in importance. Over 11,000 dams are abandoned, and of nearly 400,000 miles of road on its lands, the U.S. Forest Service considers one-fourth non-essential and often non-functional. Removing obsolete infrastructure allows greater focus and funding on maintaining or improving infrastructure most critical to society. Moreover, a concerted program of infrastructure decommissioning promises significant long-term cost savings, and is a necessary step before more substantial, systematic changes are possible, like those needed to address the new energy sources and shifting climate. One key challenge for infrastructure reform is how to prioritize and implement such a widespread and politically-charged series of decisions. Two approaches are proposed for different scales. For small, private infrastructure, emerging state and federal ecosystem service markets can provide an economic impetus to push infrastructure removal. Ecosystem market mechanisms may also be most effective at identifying those projects with the greatest ecological bang for the buck. Examples where this approach has proved successful include dam removal for stream mitigation under the Clean Water Act, and levee decommissioning on

World offshore energy loss statistics

International Nuclear Information System (INIS)

Kaiser, Mark J.

2007-01-01

Offshore operations present a unique set of environmental conditions and adverse exposure not observed in a land environment taking place in a confined space in a hostile environment under the constant danger of catastrophe and loss. It is possible to engineer some risks to a very low threshold of probability, but losses and unforeseen events can never be entirely eliminated because of cost considerations, the human factor, and environmental uncertainty. Risk events occur infrequently but have the potential of generating large losses, as evident by the 2005 hurricane season in the Gulf of Mexico, which was the most destructive and costliest natural disaster in the history of offshore production. The purpose of this paper is to provide a statistical assessment of energy losses in offshore basins using the Willis Energy Loss database. A description of the loss categories and causes of property damage are provided, followed by a statistical assessment of damage and loss broken out by region, cause, and loss category for the time horizon 1970-2004. The impact of the 2004-2005 hurricane season in the Gulf of Mexico is summarized

Air emissions assessment from offshore oil activities in Sonda de Campeche, Mexico.

Science.gov (United States)

Schifter, I; González-Macías, C; Miranda, A; López-Salinas, E

2005-10-01

Air emission data from offshore oil platforms, gas and oil processing installations and contribution of marine activities at the Sonda de Campeche, located at the Gulf of Mexico, were compiled and integrated to facilitate the study of long range transport of pollutants into the region. From this important region, roughly 76% of the total Mexican oil and gas production is obtained. It was estimated that the total air emissions of all contaminants are approximately 821,000 tons per year. Hydrocarbons are the largest pollutant emissions with 277,590 tons per year, generated during flaring activities, and SOx in second place with 185,907 tons per year. Marine and aviation activities contribute with less than 2% of total emissions. Mass of pollutants emitted per barrel of petroleum produced calculated in this work, are in the range reported by similar oil companies.

Hydrodynamic analysis of floating platform for special purposes under complex water environment

Science.gov (United States)

Ma, Guang-ying; Yao, Yun-long

2018-03-01

This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. By using ANSYS AQWA software, the hydrodynamic model of the platform was established. The time history responses of the platform motions and the cable tension forces were calculate under complex water environments, such as wind, wave, current and mooring. The results showed that the tension of the four cables are far less than the breaking tension of the cable, so that the cable will not break. This study can be referenced by the relevant researchers and engineers.

A study of rotor and platform design trade-offs for large-scale floating vertical axis wind turbines

Science.gov (United States)

Griffith, D. Todd; Paquette, Joshua; Barone, Matthew; Goupee, Andrew J.; Fowler, Matthew J.; Bull, Diana; Owens, Brian

2016-09-01

Vertical axis wind turbines are receiving significant attention for offshore siting. In general, offshore wind offers proximity to large populations centers, a vast & more consistent wind resource, and a scale-up opportunity, to name a few beneficial characteristics. On the other hand, offshore wind suffers from high levelized cost of energy (LCOE) and in particular high balance of system (BoS) costs owing to accessibility challenges and limited project experience. To address these challenges associated with offshore wind, Sandia National Laboratories is researching large-scale (MW class) offshore floating vertical axis wind turbines (VAWTs). The motivation for this work is that floating VAWTs are a potential transformative technology solution to reduce offshore wind LCOE in deep-water locations. This paper explores performance and cost trade-offs within the design space for floating VAWTs between the configurations for the rotor and platform.

Analysis of the Induction and Wake Evolution of an Offshore Floating Wind Turbine

Directory of Open Access Journals (Sweden)

Matthew Lackner

2012-04-01

Full Text Available The degrees-of-freedom associated with offshore floating wind turbines (OFWTs result in a more dynamic flow field. The resulting aerodynamic loads may be significantly influenced by these motions via perturbations in the evolving wake. This is of great interest in terms of OFWT design, placement and simulation. This study presents free vortex wake method (FVM simulations of the NREL 5-MW wind turbine of a variety of platforms, operating in a range of wind speeds synthesized platform motion time series. Motion-induced wake perturbations are observed to affect induction. Transitions between windmill and propeller states are also observed.

Outlook in the application of Chlamydomonas reinhardtii chloroplast as a platform for recombinant protein production.

Science.gov (United States)

Shamriz, Shabnam; Ofoghi, Hamideh

Microalgae, also called microphytes, are a vast group of microscopic photosynthetic organisms living in aquatic ecosystems. Microalgae have attracted the attention of biotechnology industry as a platform for extracting natural products with high commercial value. During last decades, microalgae have been also used as cost-effective and easily scalable platform for the production of recombinant proteins with medical and industrial applications. Most progress in this field has been made with Chlamydomonas reinhardtii as a model organism mainly because of its simple life cycle, well-established genetics and ease of cultivation. However, due to the scarcity of existing infrastructure for commercial production and processing together with relatively low product yields, no recombinant products from C. reinhardtii have gained approval for commercial production and most of them are still in research and development. In this review, we focus on the chloroplast of C. reinhardtii as an algal recombinant expression platform and compare its advantages and disadvantages to other currently used expression systems. We then discuss the strategies for engineering the chloroplast of C. reinhardtii to produce recombinant cells and present a comprehensive overview of works that have used this platform for the expression of high-value products.

Improved Methodology of Weather Window Prediction for Offshore Operations Based on Probabilities of Operation Failure

DEFF Research Database (Denmark)

Gintautas, Tomas; Sørensen, John Dalsgaard

2017-01-01

The offshore wind industry is building and planning new wind farms further offshore due to increasing demand on sustainable energy production and already occupied prime resource locations closer to shore. Costs of operation and maintenance, transport and installation of offshore wind turbines...... already contribute significantly to the cost of produced electricity and will continue to increase, due to moving further offshore, if the current techniques of predicting offshore wind farm accessibility are to stay the same. The majority of offshore operations are carried out by specialized ships...... that must be hired for the duration of the operation. Therefore, offshore wind farm accessibility and costs of offshore activities are primarily driven by the expected number of operational hours offshore and waiting times for weather windows, suitable for offshore operations. Having more reliable weather...

Development of heavy oil fields onshore and offshore: resemblances and challenges; Desenvolvimento de campos de oleos pesados em terra e em mar: semelhancas e desafios

Energy Technology Data Exchange (ETDEWEB)

Branco, Celso Cesar Moreira; Moczydlower, Priscila [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2008-07-01

The so called offshore heavy oils (API gravity lower than 19) and extra heavy oils (API lower than 10) are receiving increasing importance due to the light oil production decline and also to exploration difficulties. In countries like Canada, Venezuela, China and the US (California) there are immense onshore heavy oil resources sometimes classified as non conventional. Differently in Brazil, onshore heavy oil volumes are modest being important those located in offshore fields (although non comparable to the Canadian and Venezuelan ones). The issue raised in this paper is: the field location, whether onshore or offshore, is always the main constraint in the development process? Well, the question has both a 'yes' and 'no' as an answer. There are important differences but some similarities in the technologies that can be applied. In this text the authors intend to explore this point while at the same time depicting some of the main related aspects under research for proper exploitation of heavy and extra heavy oil assets. The most relevant difference between onshore and offshore heavy oil fields is the application of thermal methods for improved recovery: while worldwide spread and commercially applied to onshore fields, steam injection is not yet viable for offshore operations. The only option for improving recovery in offshore fields is water injection, which has the drawback of producing large volumes of water during the field life. Another aspect is the cost of the production wells: much cheaper onshore they allow well spacing in the order of 100 m or even 50 m whereas in offshore well spacing are in the 1000 m range. From the flow assurance point of view, inland installations can take use of solvents for heavy oil dilution, such as diesel or naphtha. Offshore this option is complicated by the long distances from the wellheads to the producing facilities in the platform, in the case of wet completions. There are also differences regarding the

3. International Workshop on Transmission Networks for Offshore Wind Farms. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ackermann, T [ed.

2002-07-01

The emphasis is on both theoretical discussions and on practical applications. After almost a decade with mainly demonstration projects in the area of offshore wind power, this year will see the first large commercial offshore wind projects with more than 50 MW installed capacity and more and more larger projects are scheduled for the coming years. Also more and more energy policy makers, electric utilities as well as the media recognize the enormous potential of offshore wind power as a large-scale sustainable energy source. The development in this area results in new ideas, questions and research proposals. Such a new topic is, hydrogen production using offshore wind farms.

From Offshoring to Backshoring

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Madsen, Erik Skov

2015-01-01

The purpose of this paper is to examine the evolution of offshoring over time. The paper employs qualitative methodology and on the basis of two case studies of Danish companies, it develops a framework conceptualizing the stages of offshoring and highlights the factors driving the transition...... between these stages. The framework challenges the linear nature of offshoring and proposes the existence of ‘the pendulum effect’. The pendulum effect suggests that the modes of offshoring (i.e. captive and non-captive) and geographies of offshoring (i.e. home and abroad) are not static; rather...

Dynamic performance of a combined gas turbine and air bottoming cycle plant for off-shore applications

DEFF Research Database (Denmark)

Benato, Alberto; Pierobon, Leonardo; Haglind, Fredrik

2014-01-01

and a combined gas turbine coupled with an air bottoming cycle plant. The case study is the Draugen off-shore oil and gas platform, located in the North Sea, Norway. The normal electricity demand is 19 MW, currently covered by two gas turbines generating each 50% of the power demand, while the third turbine......When the Norwegian government introduced the CO2 tax for hydrocarbon fuels, the challenge became to improve the performance of off-shore power systems. An oil and gas platform typically operates on an island (stand-alone system) and the power demand is covered by two or more gas turbines. In order...... to improve the plant performance, a bottoming cycle unit can be added to the gas turbine topping module, thus constituting a combined cycle plant. This paper aims at developing and testing the numerical model simulating the part-load and dynamic behavior of a novel power system, composed of two gas turbines...

Stress state reassessment of Romanian offshore structures taking into account corrosion influence

Science.gov (United States)

Joavină, R.; Zăgan, S.; Zăgan, R.; Popa, M.

2017-08-01

Progressive degradation analysis for extraction or exploration offshore structure, with appraisal of failure potential and the causes that can be correlated with the service age, depends on the various sources of uncertainty that require particular attention in design, construction and exploitation phases. Romanian self erecting platforms are spatial lattice structures consist of tubular steel joints, forming a continuous system with an infinite number of dynamic degrees of freedom. Reassessment of a structure at fixed intervals of time, recorrelation of initial design elements with the actual situation encountered in location and with structural behaviour represents a major asset in lowering vulnerabilities of offshore structure. This paper proposes a comparative reassessment of the stress state for an offshore structure Gloria type, when leaving the shipyard and at the end of that interval corresponding to capital revision, taking into account sectional changes due to marine environment corrosion. The calculation was done using Newmark integration method on a 3D model, asses of the dynamic loads was made through probabilistic spectral method.

Too much or too little of R&D offshoring : The impact of captive offshoring and contract offshoring on innovation performance

NARCIS (Netherlands)

Steinberg, Philip; Procher, Vivien D.; Urbig, Diemo

2017-01-01

Innovating firms may acquire foreign knowledge and improve their innovation performance by offshoring their R&D activities to their own foreign affiliates (captive offshoring) as well as by contracting out their R&D to external foreign parties (contract offshoring). This study examines the impact of

FINOSEIS: A new approach to offshore-building foundation soil analysis using high resolution reflection seismic and Scholte-wave dispersion analysis

Science.gov (United States)

Wilken, Dennis; Wölz, Susanne; Müller, Christof; Rabbel, Wolfgang

2009-05-01

As part of the FINOSEIS project we present the development of new seismic acquisition and inversion concepts for offshore-building foundation soil analysis. FINOSEIS is a subproject of the FINO3 project, which is aimed at the construction of an offshore research platform based in 28 m water depth, hosting eight research projects dealing with offshore wind energy topics. Our investigations focus on the determination of seismic parameters and structural information of the building plot of FINO3. We infer the shear-wave velocity structure by exploiting the dispersive properties of Scholte-waves and use high resolution 2.5D reflection seismic acquisition to determine seismic stratigraphy in three dimensions. Our work is motivated regarding possible hazards to offshore foundations such as wind parks and the FINO3 platform itself, e.g. permanent mechanical load by wind- and wave-forces possibly leading to an impairment of the soil. We conducted a pre-investigation of the site of the future platform in order to help finding a suitable foundation soil by improving common site investigation methods. In May 2006 we did a survey covering an area of 2 km square employing high resolution 2.5D reflection seismic. Along three 2 km airgun profiles Scholte-waves were recorded with Ocean-Bottom-Seismometers. Spectral analysis of these led to pseudo-2D shear-wave velocity models along the profiles. The reflection seismic area is characterized by glacial stratigraphy and diffractions documented within the penetration range of 30 m. With respect to the topography of the identified horizons as well as to the distribution of diffracting objects, a suitable foundation area for the platform was suggested. The results of the Scholte-wave experiment provide valuable information for further inversion models as well as for the dimensioning of further measurements. We also implemented an inversion strategy using the particle swarm optimization method. The inverted layers of shear-wave velocity

Safety in offshore engineering an academic course covering safety in offshore wind

NARCIS (Netherlands)

Cerda Salzmann, D.J.

2011-01-01

Offshore projects are known for their challenging conditions, generally leading to high risks. Therefore no offshore project can go without a continuous and extensive assessment on safety issues. The Delft University of Technology is currently developing a course "Safety in Offshore Engineering"

Cetacean occurrence near an offshore oil platform in southern Brazil

Directory of Open Access Journals (Sweden)

Marta Jussara Cremer

2009-09-01

Full Text Available Information about cetaceans in offshore Brazilian waters is scarce, and oil-rigs could provide an important opportunity to obtain new data. The present work was conducted on the P-XIV oil-rig (Petrobrás (26o46’02.2”S; 46o47’02.15”W, located on the border of the continental slope, in an area of 200m depth. In the period between July 2000 and August 2002, 75 sightings of cetaceans were recorded during 38 days of effort. Among the species identified, Tursiops truncatus was the most common, corresponding to 53.3% of the records. Among the misticets, only Balaenoptera acutorostrata was identified with accuracy, with 4 records (5.3%. These were the only species that approached and stayed close to the oil-rig. Many records were made at night, when the gas burner illuminated the area around the oil-rig. We recorded an aggressive interaction involving T. truncatus and B. acutorostrata.

Wind Loads on Ships and Offshore Structures Estimated by CFD

DEFF Research Database (Denmark)

Aage, Christian; Hvid, S.L.; Hughes, P.H.

1997-01-01

Wind loads on ships and offshore structures could until recently be determined only by model tests, or by statistical methods based on model tests. By the development of Computational Fluid Dynamics or CFD there is now a realistic computational alternative available. In this paper, wind loads...... on a seagoing ferry and on a semisubmersible offshore platform have been estimated by CFD. The results have been compared with wind tunnel model tests and, for the ferry, a few full-scale measurements, and good agreement is obtained. The CFD method offers the possibility of a computational estimate of scale...... effects related to wind tunnel model testing. An example of such an estimate on the ferry is discussed. Due to the time involved in generating the computational mesh and in computing the solution, the CFD method is not at the moment economically competitive to routine wind tunnel model testing....

Potential Fish Production Impacts from Partial Removal of Decommissioned Oil and Gas Platforms off the Coast of California

Science.gov (United States)

Claisse, J.; Pondella, D.; Love, M.; Zahn, L.; Williams, C.; Bull, A. S.

2016-02-01

When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

Continuous Platform Development

DEFF Research Database (Denmark)

Nielsen, Ole Fiil

low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream......, but continuous product family evolution challenges this strategy. The concept of continuous platform development is based on the fact that platform development should not be a one-time experience but rather an ongoing process of developing new platforms and updating existing ones, so that product family...

Development of an offshore gas field: Hydrate and paraffin tests for ensuring continuous production; Entwicklung eines offshore Gasfelds - Hydrat- und Paraffinuntersuchungen zur Sicherstellung der kontinuierlichen Produktion

Energy Technology Data Exchange (ETDEWEB)

Zettlitzer, M.; Busch, M. [RWE Dea AG, Wietze (Germany)

2005-07-01

Production in offshore gas fields often requires transporting of undried raw gas through pipelines laid on, or in, the sea floor. This will cool the gas down - at worst to sea floor temperature, which may be as low as 4 C. This will cause condensation of the water and higher hydrocarbons. Two of the related problems are gone into here, i.e. potential formation of gas hydrates and potential paraffin deposits. The paraffin problem is relevant not only for crude gas transport but also - even more so - for gas conditioning in a freeze-dryer. (orig.)

Microfluidic Platform for the Continuous Production and Characterization of Multilamellar Vesicles

DEFF Research Database (Denmark)

Ghazal, Aghiad; Gontsarik, Mark; Kutter, Jörg P.

2017-01-01

A microfluidic platform combined with synchrotron small-angle X-ray scattering (SAXS) was used for monitoring the continuous production of multilamellar vesicles (MLVs). Their production was fast and started to evolve within less than 0.43 s of contact between the lipids and the aqueous phase...

Airfoil family design for large offshore wind turbine blades

Science.gov (United States)

Méndez, B.; Munduate, X.; San Miguel, U.

2014-06-01

Wind turbine blades size has scaled-up during last years due to wind turbine platform increase especially for offshore applications. The EOLIA project 2007-2010 (Spanish Goverment funded project) was focused on the design of large offshore wind turbines for deep waters. The project was managed by ACCIONA Energia and the wind turbine technology was designed by ACCIONA Windpower. The project included the design of a wind turbine airfoil family especially conceived for large offshore wind turbine blades, in the order of 5MW machine. Large offshore wind turbines suffer high extreme loads due to their size, in addition the lack of noise restrictions allow higher tip speeds. Consequently, the airfoils presented in this work are designed for high Reynolds numbers with the main goal of reducing blade loads and mantainig power production. The new airfoil family was designed in collaboration with CENER (Spanish National Renewable Energy Centre). The airfoil family was designed using a evolutionary algorithm based optimization tool with different objectives, both aerodynamic and structural, coupled with an airfoil geometry generation tool. Force coefficients of the designed airfoil were obtained using the panel code XFOIL in which the boundary layer/inviscid flow coupling is ineracted via surface transpiration model. The desing methodology includes a novel technique to define the objective functions based on normalizing the functions using weight parameters created from data of airfoils used as reference. Four airfoils have been designed, here three of them will be presented, with relative thickness of 18%, 21%, 25%, which have been verified with the in-house CFD code, Wind Multi Block WMB, and later validated with wind tunnel experiments. Some of the objectives for the designed airfoils concern the aerodynamic behavior (high efficiency and lift, high tangential coefficient, insensitivity to rough conditions, etc.), others concern the geometry (good for structural design

Airfoil family design for large offshore wind turbine blades

International Nuclear Information System (INIS)

Méndez, B; Munduate, X; Miguel, U San

2014-01-01

Wind turbine blades size has scaled-up during last years due to wind turbine platform increase especially for offshore applications. The EOLIA project 2007-2010 (Spanish Goverment funded project) was focused on the design of large offshore wind turbines for deep waters. The project was managed by ACCIONA Energia and the wind turbine technology was designed by ACCIONA Windpower. The project included the design of a wind turbine airfoil family especially conceived for large offshore wind turbine blades, in the order of 5MW machine. Large offshore wind turbines suffer high extreme loads due to their size, in addition the lack of noise restrictions allow higher tip speeds. Consequently, the airfoils presented in this work are designed for high Reynolds numbers with the main goal of reducing blade loads and mantainig power production. The new airfoil family was designed in collaboration with CENER (Spanish National Renewable Energy Centre). The airfoil family was designed using a evolutionary algorithm based optimization tool with different objectives, both aerodynamic and structural, coupled with an airfoil geometry generation tool. Force coefficients of the designed airfoil were obtained using the panel code XFOIL in which the boundary layer/inviscid flow coupling is ineracted via surface transpiration model. The desing methodology includes a novel technique to define the objective functions based on normalizing the functions using weight parameters created from data of airfoils used as reference. Four airfoils have been designed, here three of them will be presented, with relative thickness of 18%, 21%, 25%, which have been verified with the in-house CFD code, Wind Multi Block WMB, and later validated with wind tunnel experiments. Some of the objectives for the designed airfoils concern the aerodynamic behavior (high efficiency and lift, high tangential coefficient, insensitivity to rough conditions, etc.), others concern the geometry (good for structural design

Analysis of North Sea Offshore Wind Power Variability

Directory of Open Access Journals (Sweden)

Aymeric Buatois

2014-05-01

Full Text Available This paper evaluates, for a 2030 scenario, the impact on onshore power systems in terms of the variability of the power generated by 81 GW of offshore wind farms installed in the North Sea. Meso-scale reanalysis data are used as input for computing the hourly power production for offshore wind farms, and this total production is analyzed to identify the largest aggregated hourly power variations. Based on publicly available information, a simplified representation of the coastal power grid is built for the countries bordering the North Sea. Wind farms less than 60 km from shore are connected radially to the mainland, while the rest are connected to a hypothetical offshore HVDC (High-Voltage Direct Current power grid, designed such that wind curtailment does not exceed 1% of production. Loads and conventional power plants by technology and associated cost curves are computed for the various national power systems, based on 2030 projections. Using the MATLAB-based MATPOWER toolbox, the hourly optimal power flow for this regional hybrid AC/DC grid is computed for high, low and medium years from the meso-scale database. The largest net load variations are evaluated per market area and related to the extra load-following reserves that may be needed from conventional generators.

Internationalization in the offshore sector and the use of strategic alliances. Kongsberg Offshore AS - A case study; Internasjonalisering i offshorebransjen og bruk av strategiske allianser. Kongsberg Offshore AS - et casestudium

Energy Technology Data Exchange (ETDEWEB)

Enger, Ole Peder; Andreassen, Yngve

2000-06-01

The structure of the Norwegian offshore sector is characterized by many small technology companies and only a few big ones. At the same time, operators prefer to deal with as few contractors as possible. Thus, the small technology companies must operate as subcontractors or cooperate as joint venture companies in order to win supply contracts. This report studies Kongsberg Offshore AS, or KOS, which is a daughter company of Food Machinery Corporation (FMC). KOS is a leading supplier of ''turnkey'' systems for sub see production and measuring systems and has had great success in its internationalization.

The Impact of R&D Offshoring on the Home Knowledge Production of OECD Investing Regions

DEFF Research Database (Denmark)

M. D'Agostino, Lorena; Laursen, Keld; D. Santangelo, Grazia

2013-01-01

production. Using a theoretical framework based on economic geography and the literature on international knowledge sourcing, we conjecture that high-income regions would have a comparative advantage in high-tech R&D, while emerging economies would have an advantage in medium/low R&D. Complementarity should......We investigate the effect of research and development (R&D) offshoring from high-income regions to prominent emerging economies. Specifically, we examine whether there is a complementary relationship between a region’s home and foreign investments in R&D that affects home’s regional knowledge...

Going offshore or better staying in?

DEFF Research Database (Denmark)

Kreutzer, Fabian; Mitze, Timo

2017-01-01

We analyse the short- to mid-run effects of spatial relocation strategies on firm innovativeness and productivity growth. Using conditional difference-in-difference estimation with multiple treatments, we find for a sample of German firms in 1999–2013 that offshoring has a statistically significa...

Epifauna dynamics at an offshore foundation--implications of future wind power farming in the North Sea.

Science.gov (United States)

Krone, Roland; Gutow, Lars; Joschko, Tanja J; Schröder, Alexander

2013-04-01

In the light of the introduction of thousands of large offshore wind power foundations into the North Sea within the next decades, this manuscript focuses on the biofouling processes and likely reef effects. The study explores the macrozoobenthos (biofouling) colonization at an offshore platform which is comparable to offshore wind turbine foundations. A total of 183 single samples were taken and the parameters water depth and time were considered comparing biofouling masses and communities. The blue mussel Mytilus edulis, Anthozoa and the Amphipoda Jassa spp. were the dominant species. The community from the 1 m zone and those from the 5 and 20-28 m zones can clearly be differentiated. The 10 m zone community represents the transition between the M. edulis dominated 1 m and 5 m zones and the Anthozoa dominated 20-28 m zone. In the future offshore wind farms, thousands of wind turbine foundations will provide habitat for a hard bottom fauna which is otherwise restricted to the sparse rocky habitats scattered within extensive sedimentary soft bottoms of the German Bight. However, offshore wind power foundations cannot be considered natural rock equivalents as they selectively increase certain natural hard bottom species. The surface of the construction (1280 m²) was covered by an average of 4300 kg biomass. This foundation concentrates on its footprint area (1024 m²) 35 times more macrozoobenthos biomass than the same area of soft bottom in the German exclusive economic zone (0.12 kg m(-2)), functioning as a biomass hotspot. Concerning the temporal biomass variation, we assume that at least 2700 kg biomass was exported on a yearly basis. 345 × 10(4) single mussel shells of different sizes were produced during the study period. It is anticipated that the M. edulis abundance will increase in the North Sea due to the expansion of the offshore wind farm development. This will result in the enhanced production of secondary hard substrate (mussel shells

Offshore risk assessment

CERN Document Server

Vinnem, Jan-Erik

2014-01-01

  Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for more than three decades in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions.   This updated and expanded third edition has been informed by a major R&D program on offshore risk assessment in Norway and summarizes research from 2006 to the present day. Rooted with a thorough discussion of risk metrics and risk analysis methodology,  subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems.   Separate chapters analyze the main hazards of offshore structures: fire, explosion, collision, and falling objects as well as structural and marine hazards. Risk mitigation and control are discussed, as well as an illustrat...

Study and application of weak gel used for an offshore oilfield

Energy Technology Data Exchange (ETDEWEB)

Tang, X.; Liu, Y.; Bai, B.; Liu, G.; Jiang, R. [Petro-China Research Inst. of Petroleum Exploration and Development, Beijing (China); Xiang, W. [China Offshore Oil Research Center of China National Offshore Oil Co. (China)

2005-07-01

This paper described the profile modification technique which has been used successfully in China's oil fields on land and which has become one of the key techniques to improve the development of mature fields with high heterogeneity and high water cut. One such reservoir is SZ361, an offshore oilfield characterized by thick oil layers, high permeability contrast, high oil viscosity and high water salinity. All injection wells were completed by liner gravel-packing. Water cut of some production wells is above 90 per cent. A large volume of weak gel treatment was proposed to control water conformance. A new weak gel was developed to address the specific features of offshore oil fields, such as small space of platform and high salinity of injection water. The gel properties were presented along with an evaluation of the salinity and temperature on the thermal stability of the gel. The plugging efficiency of the gel was carried out on different permeability cores. Results show that the selected polymer and cross-linkers can be well dispersed and solved within 30 minutes when mixing with sea water or produced water. The gelation time can be controlled by adjusting the gel composition. The novel gel can be applied in the reservoirs with a temperature range of 30-70 degrees C and salinity below 40,000 mg/l. The gel was tested in one injection well and proved to be economically efficient. 7 refs., 3 tabs., 8 figs.

The business impact of an integrated continuous biomanufacturing platform for recombinant protein production.

Science.gov (United States)

Walther, Jason; Godawat, Rahul; Hwang, Chris; Abe, Yuki; Sinclair, Andrew; Konstantinov, Konstantin

2015-11-10

The biotechnology industry primarily uses batch technologies to manufacture recombinant proteins. The natural evolution of other industries has shown that transitioning from batch to continuous processing can yield significant benefits. A quantitative understanding of these benefits is critical to guide the implementation of continuous processing. In this manuscript, we use process economic modeling and Monte Carlo simulations to evaluate an integrated continuous biomanufacturing (ICB) platform and conduct risk-based valuation to generate a probabilistic range of net-present values (NPVs). For a specific ten-year product portfolio, the ICB platform reduces average cost by 55% compared to conventional batch processing, considering both capital and operating expenses. The model predicts that these savings can further increase by an additional 25% in situations with higher-than-expected product demand showing the upward potential of the ICB platform. The ICB platform achieves these savings and corresponding flexibility mainly due to process intensification in both upstream and downstream unit operations. This study demonstrates the promise of continuous bioprocessing while also establishing a novel framework to quantify financial benefits of other platform process technologies. Copyright © 2015 Elsevier B.V. All rights reserved.

Offshore wind energy developments

DEFF Research Database (Denmark)

Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu

2014-01-01

This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services....

China, Norway and offshore wind development. A win-win wind relationship?

Energy Technology Data Exchange (ETDEWEB)

Enslow, Rachel

2010-03-15

This study published by WWF Norway, outlines the status of offshore wind power development in China and looks at how the Norwegian offshore industry can contribute to speed it up. Today China is the world's fastest growing market for renewable energy. China's annual offshore wind energy generation potential is 11,000 TWh, similar to that of the North Sea. The study estimates that in the next decade China will install 30 GW of offshore wind energy generation capacity. This could mitigate 1.3 billion tons of CO{sub 2} over the 20 year asset lifetime (more than the total Norwegian emissions forecast over the same period). To unleash China's potential and speed up development of offshore wind energy production, however, bridges must to be built between stakeholders with the relevant experience and the best available technology and policy makers and project developers in China. This study puts forward possible ways for future cooperation between China and Norway - a country with a world leading offshore industry cluster - in order to leverage mutual strengths to upscale and commercialize offshore wind technology for the global market. (Author)

China, Norway and offshore wind development. A win-win wind relationship?

Energy Technology Data Exchange (ETDEWEB)

Enslow, Rachel

2010-03-15

This study published by WWF Norway, outlines the status of offshore wind power development in China and looks at how the Norwegian offshore industry can contribute to speed it up. Today China is the world's fastest growing market for renewable energy. China's annual offshore wind energy generation potential is 11,000 TWh, similar to that of the North Sea. The study estimates that in the next decade China will install 30 GW of offshore wind energy generation capacity. This could mitigate 1.3 billion tons of CO{sub 2} over the 20 year asset lifetime (more than the total Norwegian emissions forecast over the same period). To unleash China's potential and speed up development of offshore wind energy production, however, bridges must to be built between stakeholders with the relevant experience and the best available technology and policy makers and project developers in China. This study puts forward possible ways for future cooperation between China and Norway - a country with a world leading offshore industry cluster - in order to leverage mutual strengths to upscale and commercialize offshore wind technology for the global market. (Author)

Offshore Wind Energy in Denmark

DEFF Research Database (Denmark)

Möller, Bernd; Hong, Lixuan; Hvelplund, Frede

for Denmark and invites to reconsider the technological and institutional choices made. Based on a continuous resource-economic model operating in a geographical information systems (GIS) environment, which describes resources, costs and area constraints in a spatially explicit way, the relation between......Offshore wind energy has developed in terms of turbine and project size, and currently undergoes a significant up-scaling to turbines and parks at greater distance to shore and deeper waters. Expectations to the positive effect of economies of scale on power production costs, however, have...... availability of locations, driven by accelerating requirements of environmental concern, park size and public acceptance, is one important driver. Mounting risk of mega-projects and the infinite demand for renewable energy is another likely cause. The present paper addresses the scale of offshore wind parks...

Field development planning for an offshore extra heavy oil in the Gulf of Mexico

Energy Technology Data Exchange (ETDEWEB)

Hernandez-Garcia, G.; Anguiano-Rojas, J. [PEMEX Exploration and Production, Mexico City (Mexico)

2009-07-01

This paper presented a phased development strategy for an offshore extra-heavy oil development located in the Gulf of Mexico. The Ayatsil-1 oil field is located in an upper Cretaceous brecciated formation. One of the primary concerns of the project is the infrastructure that is needed to handle low reservoir temperatures and high viscosity, low gravity API oil. A delineation well was drilled in order to confirm the areal extension of the reservoir. The field contains an estimated 3.1 billion barrels of oil-in-place. The project will involve the installation of fixed platforms and production platforms. Electric submersible pumps (ESPs) and multiphase pumps will be used to transport the oil from between 17 to 25 wells. Analyses were conducted to determine transport mechanisms as well as gathering networks in both stationary and transitory regimes. The viscosity of live and dead oil in the reservoirs must be accurately measured in relation to temperature in order to define the artificial systems that will be used to reduce viscosity. Results from several studies will be used to determine the feasibility of various chemical, thermal, and diluent applications. 6 refs., 3 figs.