WorldWideScience

Sample records for obliqua bristle extract

  1. Biochemical and biological properties of Lonomia obliqua bristle extract

    Directory of Open Access Journals (Sweden)

    A. M. Chudzinski-Tavassi

    2006-04-01

    Full Text Available Lonomia obliqua caterpillar is frequently seen in accidents with humans especially in the south of Brazil. Patients develop a hemorrhagic syndrome that can be treated with specific antilonomic serum. A consumptive coagulopathy was found to be the main cause of bleeding complications observed in patients after contact with L. obliqua. Studies revealed that L. obliqua caterpillar bristle extract (LOCBE displays a procoagulant activity that leads to intravascular thrombin formation, resulting in a special form of disseminated intravascular coagulation (DIC. Fibrinolysis seems to be secondary to the fibrin production, since no direct fibrinolytic activity was found in LOCBE. Two procoagulant toxins, a factor X activator (Losac and a prothrombin activator (Lopap, were isolated from LOCBE and characterized. Infusion of Lopap into experimental animals triggered a condition similar to that observed in human envenomation.

  2. Foraging behavior of Anastrepha Ludens, A. obliqua, and A. serpentina in response to feces extracts containing host marking pheromone.

    Science.gov (United States)

    Aluja, Martin; Díaz-Fleischer, Francisco

    2006-02-01

    Following oviposition, females of many Tephritid flies deposit host marking pheromones (HMPs) to indicate that the host fruit has been occupied. We describe the foraging behavior of these three economically important species (Anastrepha ludens and A. obliqua from the fraterculus species group and A. serpentina from the serpentina species group) when they encounter an artificial fruit (green agar spheres wrapped in Parafilm) marked with intra- and interspecific feces extracts that contain, among other substances, host marking pheromone. When flies encountered fruit treated with either 1 or 100 mg/ml feces extract, there were drastic and statistically significant reductions in tree residence time, mean time spent on fruit, and in the number of oviposition attempts or actual ovipositions when compared to the control treatment (clean fruit). These responses were almost identical irrespective of extract origin (i.e., fly species), indicating complete interspecific HMP cross-recognition by all three Anastrepha species tested. We discuss the ecological and practical implications of our findings.

  3. Lonomia obliqua Walker (Lepidoptera: Saturniidae: hemostasis implications

    Directory of Open Access Journals (Sweden)

    Silviane Maggi

    2015-06-01

    Full Text Available Summary In southern Brazil, since 1989, several cases of accidents produced by unwilling contact with the body of poisonous caterpillars of the moth species Lonomia obliqua Walker, 1855 (Lepidoptera: Saturniidae, were described. L. obliqua caterpillars have gregarious behavior and feed on leaves of host trees during the night, staying grouped in the trunk during the day, which favors the occurrence of accidents with the species. This caterpillar has the body covered with bristles that on contact with the skin of individuals, breaks and release their contents, inoculating the venom into the victim. The basic constitution of the venom is protein and its components produce physiological changes in the victim, which include disturbances in hemostasis. Hemorrhagic syndrome associated with consumption coagulopathy, intravascular hemolysis and acute renal failure are some of the possible clinical manifestations related to poisoning by L. obliqua. Specific laboratory tests for diagnosis of poisoning have not been described previously. The diagnosis of poisoning is made based on the patient's medical history, clinical manifestations, erythrocyte levels, and, primarily, parameters that evaluate blood coagulation. Treatment is performed with the use of supportive care and the administration of specific hyperimmune antivenom. Poisoning can be serious and even fatal.

  4. Removal of a Wire Brush Bristle from the Hypopharynx Using Suspension, Microscope, and Fluoroscopy

    Directory of Open Access Journals (Sweden)

    Matthew R. Naunheim

    2015-01-01

    Full Text Available Wire brush bristles are an increasingly recognized hazard that can present as a foreign body in the aerodigestive tract. Due to their small size and tendency to become embedded in surrounding tissue, these small metallic bristles present a unique operative challenge to otolaryngologists. Here we present a case of a 40-year-old woman who underwent endoscopic extraction of a wire bristle from the posterior pharyngeal wall using suspension, microscopy, and C-arm fluoroscopy. We believe this is the first published case of an endoscopic removal of a buried foreign body in the hypopharynx using these methods of localization concurrently. By leveraging multiple techniques for visualization, surgeons can avoid open exploration while ensuring complete removal of the object. Additionally, this case highlights the importance of regulatory oversight and consumer awareness of the hazards of grill brushes.

  5. Application of neutron activation analysis method in leaves of Casearia obliqua medicinal plant

    International Nuclear Information System (INIS)

    Yamashita, Celina I.; Saiki, Mitiko; Sertie, Jaime A.A.

    2005-01-01

    The pharmacological properties of medicinal plants have been related to the presence of organic compounds, however elements are also known to have an important participation in the active compounds constitution process. In this study, instrumental neutron activation analysis (INAA) was applied to determine elements in leaves of Casearia obliqua medicinal plant collected at two different locations in the Atlantic Forest, Brazil, SP. Soil samples collected from where this plant was grown were also analyzed in order to verify if there is a correlation between the elements present in soils and plant leaves. Br, Ca, Cl, Co, Cr, Cs, Fe, K, La, Mn, Na, Rb, Sb, Sc and Zn were determined in C. obliqua leaves and the elements As, Ca, Ce, Eu, Fe, Hf, La, Lu, Nd, Rb, Sc, Sm, Tb, Th, U and Zn in soils. Soil samples collected from two different locations presented similar concentrations for most elements. Likewise, C. obliqua leaves collected from the two locations presented similar elemental contents. These results suggest that analysis of extracts from these leaf samples and the evaluation of their pharmacological activities should be carried out. Certified reference materials IAEA-Soil-7, USGS W-1, NIST 1573a Tomato Leaves and NIST 1515 Apple Leaves were analyzed and the quality of the obtained results was assured. (author)

  6. The effectiveness of sharp end and rounded end bristle toothbrush

    OpenAIRE

    Paulus Januar; Anastasia Susetyo; Ratih Widyastuti

    2010-01-01

    Background: Numerous designs of manual toothbrush are available in the market with the claims of superiority in plaque removal. It often makes the public confuse which is the best design. The sharp end bristle toothbrush is a modification that commercially available in the market. Purpose: The objective of the study was to compare the effectiveness in plaque removal of the sharp end bristle toothbrush and the rounded end bristle toothbrush. Methods: This clinical trial was a double blind cros...

  7. Reynolds number scalability of bristled wings performing clap and fling

    Science.gov (United States)

    Jacob, Skyler; Kasoju, Vishwa; Santhanakrishnan, Arvind

    2017-11-01

    Tiny flying insects such as thrips show a distinctive physical adaptation in the use of bristled wings. Thrips use wing-wing interaction kinematics for flapping, in which a pair of wings clap together at the end of upstroke and fling apart at the beginning of downstroke. Previous studies have shown that the use of bristled wings can reduce the forces needed for clap and fling at Reynolds number (Re) on the order of 10. This study examines if the fluid dynamic advantages of using bristled wings also extend to higher Re on the order of 100. A robotic clap and fling platform was used for this study, in which a pair of physical wing models were programmed to execute clap and fling kinematics. Force measurements were conducted on solid (non-bristled) and bristled wing pairs. The results show lift and drag forces were both lower for bristled wings when compared to solid wings for Re ranging from 1-10, effectively increasing peak lift to peak drag ratio of bristled wings. However, peak lift to peak drag ratio was lower for bristled wings at Re =120 as compared to solid wings, suggesting that bristled wings may be uniquely advantageous for Re on the orders of 1-10. Flow structures visualized using particle image velocimetry (PIV) and their impact on force production will be presented.

  8. A review on plant Cordia obliqua Willd. (Clammy cherry).

    Science.gov (United States)

    Gupta, Richa; Gupta, Ghanshyam Das

    2015-01-01

    Cordia obliqua Willd. plant (Common name-Clammy Cherry) belongs to family Boraginaceae. It is a medium-sized deciduous tree and very vigorous in growth. According to traditional system, it possesses anthelmintic, purgative, diuretic, expectorant, antipyretic, hepatoprotective and analgesic action. The fruits are edible and used as pickle. The gum obtained from mucilage is used for pasting sheets of paper and as matrix forming material in tablet formulations. Phytochemical investigations show the presence of alkaloids, flavonoids, phenolics, tannins and reducing sugar. Evaluation of pharmacological activities confirmed C. obliqua plant as antimicrobial, hypotensive, respiratory stimulant, diuretic and anti-inflammatory drug. A number of traditional activities of this plant still need scientific approval which will increase its medicinal potential. This review presents the Pharmacognostic properties, phytochemical constituents, traditional uses and biological activities reported for the plant and it will be helpful to explore the knowledge about Cordia obliqua Willd. for the researchers.

  9. A review on plant Cordia obliqua Willd. (Clammy cherry)

    OpenAIRE

    Richa Gupta; Ghanshyam Das Gupta

    2015-01-01

    Cordia obliqua Willd. plant (Common name-Clammy Cherry) belongs to family Boraginaceae. It is a medium-sized deciduous tree and very vigorous in growth. According to traditional system, it possesses anthelmintic, purgative, diuretic, expectorant, antipyretic, hepatoprotective and analgesic action. The fruits are edible and used as pickle. The gum obtained from mucilage is used for pasting sheets of paper and as matrix forming material in tablet formulations. Phytochemical investigations show ...

  10. Bristled shark skin: a microgeometry for boundary layer control?

    International Nuclear Information System (INIS)

    Lang, A W; Hidalgo, P; Westcott, M; Motta, P

    2008-01-01

    There exists evidence that some fast-swimming shark species may have the ability to bristle their scales during fast swimming. Experimental work using a water tunnel facility has been performed to investigate the flow field over and within a bristled shark skin model submerged within a boundary layer to deduce the possible boundary layer control mechanisms being used by these fast-swimming sharks. Fluorescent dye flow visualization provides evidence of the formation of embedded cavity vortices within the scales. Digital particle image velocimetry (DPIV) data, used to evaluate the cavity vortex formation and boundary layer characteristics close to the surface, indicate increased momentum in the slip layer forming above the scales. This increase in flow velocity close to the shark's skin is indicative of boundary layer control mechanisms leading to separation control and possibly transition delay for the bristled shark skin microgeometry

  11. Bristled shark skin: a microgeometry for boundary layer control?

    Energy Technology Data Exchange (ETDEWEB)

    Lang, A W; Hidalgo, P; Westcott, M [Aerospace Engineering and Mechanics Department, University of Alabama, Box 870280, Tuscaloosa, AL 35487 (United States); Motta, P [Biology Department, University of South Florida, 4202 East Fowler Avenue, Tampa, FL 33620 (United States)], E-mail: alang@eng.ua.edu

    2008-12-01

    There exists evidence that some fast-swimming shark species may have the ability to bristle their scales during fast swimming. Experimental work using a water tunnel facility has been performed to investigate the flow field over and within a bristled shark skin model submerged within a boundary layer to deduce the possible boundary layer control mechanisms being used by these fast-swimming sharks. Fluorescent dye flow visualization provides evidence of the formation of embedded cavity vortices within the scales. Digital particle image velocimetry (DPIV) data, used to evaluate the cavity vortex formation and boundary layer characteristics close to the surface, indicate increased momentum in the slip layer forming above the scales. This increase in flow velocity close to the shark's skin is indicative of boundary layer control mechanisms leading to separation control and possibly transition delay for the bristled shark skin microgeometry.

  12. Facial bristle feather histology and morphology in New Zealand birds: implications for function.

    Science.gov (United States)

    Cunningham, Susan J; Alley, Maurice R; Castro, Isabel

    2011-01-01

    Knowledge of structure in biology may help inform hypotheses about function. Little is known about the histological structure or the function of avian facial bristle feathers. Here we provide information on morphology and histology, with inferences for function, of bristles in five predominantly insectivorous birds from New Zealand. We chose species with differing ecologies, including: brown kiwi (Apteryx mantelli), morepork (Ninox novaezealandae), hihi (Notiomystis cincta), New Zealand robin (Petroica australis), and New Zealand fantail (Rhipidura fuliginosa). Average bristle length corrected for body size was similar across species. Bristles occurred in distinct groups on different parts of the head and upper rictal bristles were generally longest. The lower rictal bristles of the fantail were the longest possessed by that species and were long compared to bristles of other species. Kiwi were the only species with forehead bristles, similar in length to the upper rictal bristles of other species, and the lower rictal bristles of fantails. Herbst corpuscles (vibration and pressure sensitive mechanoreceptors) were found in association with bristle follicles in all species. Nocturnal and hole-nesting birds had more heavily encapsulated corpuscles than diurnal open-nesting species. Our results suggest that avian facial bristles generally have a tactile function in both nocturnal and diurnal species, perhaps playing a role in prey handling, gathering information during flight, navigating in nest cavities and on the ground at night and possibly in prey-detection. These differing roles may help explain the observed differences in capsule thickness of the corpuscles. Copyright © 2010 Wiley-Liss, Inc.

  13. Mesosternal bristle number in a cosmopolitan drosophilid: an X ...

    Indian Academy of Sciences (India)

    RESEARCH ARTICLE. Mesosternal ... Going down the microchaetae series, we find, after a gap, a pair of fairly .... phenotype can be regarded as a function of its liability (i.e. .... Developmental map of mesosternal bristle number es- ..... mediate phenotype (1-1) indicating a codominant effect. .... quantitative genetical theory.

  14. Flow structure and aerodynamic performance of a hovering bristled wing in low Re

    Science.gov (United States)

    Lee, Seunghun; Lahooti, Mohsen; Kim, Daegyoum

    2017-11-01

    Previous studies on a bristled wing have mainly focused on simple kinematics of the wing such as translation or rotation. The aerodynamic performance of a bristled wing in a quasi-steady phase is known to be comparable to that of a smooth wing without a gap because shear layers in the gaps of the bristled wing are sufficiently developed to block the gaps. However, we point out that, in the starting transient phase where the shear layers are not fully developed, the force generation of a bristled wing is not as efficient as that of a quasi-steady state. The performance in the transient phase is important to understand the aerodynamics of a bristled wing in an unsteady motion. In the hovering motion, due to repeated stroke reversals, the formation and development of shear layers inside the gaps is repeated in each stroke. In this study, a bristled wing in hovering is numerically investigated in the low Reynolds number of O(10). We especially focus on the development of shear layers during a stroke reversal and its effect on the overall propulsive performance. Although the aerodynamic force generation is slightly reduced due to the gap vortices, the asymmetric behavior of vortices in a gap between bristles during a stroke reversal makes the bristled wing show higher lift to drag ratio than a smooth wing.

  15. Clap and Fling Interaction of Bristled Wings: Effects of Varying Reynolds Number and Bristle Spacing on Force Generation and Flow Structures

    Science.gov (United States)

    Kasoju, Vishwa Teja

    The smallest flying insects with body lengths under 1 mm, such as thrips and fairyflies, typically show the presence of long bristles on their wings. Thrips have been observed to use wing-wing interaction via 'clap and fling' for flapping flight at low Reynolds number (Re) on the order of 10, where a wing pair comes into close contact at the end of upstroke and fling apart at the beginning of downstroke. We examined the effects of varying the following parameters on force generation and flow structures formed during clap and fling: (1) Re ranging from 5 to 15 for a bristled wing pair (G/D = 17) and a geometrically equivalent solid wing pair; and (2) ratio of spacing between bristles to bristle diameter (G/D) for Re = 10. The G/D ratio in 70 thrips species were quantified from published forewing images. Scaled-up physical models of three bristled wing pairs of varying G/D (5, 11, 17) and a solid wing pair (G/D = 0) were fabricated. A robotic model was used for this study, in which a wing pair was immersed in an aquarium tank filled with glycerin and driven by stepper motors to execute clap and fling kinematics. Dimensionless lift and drag coefficients were determined from strain gauge measurements. Phase-locked particle image velocimetry (PIV) measurements were used to examine flow through the bristles. Chordwise PIV was used to visualize the leading edge vortex (LEV) and trailing edge vortex (TEV) formed over the wings during clap and fling. With increasing G/D, larger reduction was observed in peak drag coefficients as compared to reduction in peak lift coefficients. Net circulation, defined as the difference in circulation (strength) of LEV and TEV, diminished with increasing G/D. Reduction in net circulation resulted in reducing lift generated by bristled wings as compared to solid wings. Leaky, recirculating flow through the bristles provided large drag reduction during fling of a bristled wing pair. If flight efficiency is defined as the ratio of lift to drag

  16. Dispersal and longevity of wild and mass-reared Anastrepha Ludens and Anastrepha Obliqua (Diptera: Tephritidae)

    International Nuclear Information System (INIS)

    Hernandez, E.; Orozco, D.; Flores Breceda, S.; Dominguez, J.

    2007-01-01

    The rates of dispersal and survival of sterile mass-reared laboratory flies and sterile wild flies of Anastrepha ludens (Loew) and Anastrepha obliqua (Macquart) were estimated and compared with a regular rectangular array of 64 food-baited traps spaced 60 m between traps around the release point in Tapachula Chiapas, Mexico. The traps were scored every day during the first week, and then every 3 d over a 30-d period. For A. obliqua, the number of males recaptured was higher than that of females, while for A. ludens, females were recaptured more frequently than males. The recapture rate for the wild strains ranged from 0.6-24.8% for A. ludens and 1.3-16.2% for A. obliqua and the corresponding ranges for the mass-reared strains were 0.5-7.1% and 0.5-3.0% respectively. The life expectancy was 4.7 d for wild and 4.3 d for mass-reared A. obliqua males but 3 and 2 d, respectively, for wild and mass-reared A. ludens males. The net displacement of A. ludens and A. obliqua ranged approximately from 100-250 m and took place mostly on the first day. Wild A. ludens moved to the northwest from the release point while the mass-reared strain moved to the west. The A. obliqua wild flies moved to the west, while the mass-reared strain shifted to the southwest. We discuss the implications of our findings as to the spacing and frequency of sterile fly releases for the suppression of wild populations. (author) [es

  17. Effectiveness of Different Bristle Designs of Toothbrushes and Periodontal Status among Fixed Orthodontic Patients: A Double-blind Crossover Design.

    Science.gov (United States)

    Naik, Sandhya P; Punathil, Sameer; Shetty, Praveena; Jayanti, Ipsita; Jalaluddin, Md; Avijeeta, Anisha

    2018-02-01

    The aim of the present study was to evaluate the effectiveness of different bristle designs of toothbrushes and the periodontal status among patients undergoing fixed orthodontic treatment. This randomized controlled trial (RCT) consisted of 45 adolescents (comprising 20 males and 25 females) undergoing fixed orthodontic treatment. The study participants were randomly allocated to three groups, each group being assigned a locally available toothbrush with a particular design of toothbrush bristle. In the first test phase, group I study participants were allocated to toothbrush with flat bristles, group II study subjects were allocated to toothbrush with zigzag bristles, and group III study participants were allocated to toothbrush with crisscross bristles. The study participants were recalled after 4 weeks to check the effectiveness of the allocated toothbrushes. A washout period of 1 week was maintained to ensure that there was no carryover effect of the different bristle designs. In the second test phase, each patient used the opposite toothbrush bristle design (group I: toothbrush with zigzag bristles, group II: toothbrush with crisscross bristles, and group III: toothbrush with flat bristles). Plaque scores were measured using Turesky-Gilmore-Glickman modification of Quigley-Hein plaque index (PI). In both phase 1 and 2 of this RCT, toothbrush with crisscross bristles exhibited maximum plaque reduction among the three different bristle design toothbrushes following 30 days (p = 0.312 ± 0.102 and 0.280 ± 0.110, respectively), which was statistically significant. It was concluded that all the three designs of toothbrushes were effective in removing plaque in patients with fixed orthodontic appliances. But among the three different toothbrushes, toothbrush with crisscross bristles showed the highest mean plaque reduction. Plaque accumulation around the orthodontic brackets and gingival margins is quite common among the fixed orthodontic patients, who encounter

  18. Dopaol 2-keto- and 2,3-diketo-glycosides from Chelone obliqua (Scrophulariaceae)

    DEFF Research Database (Denmark)

    Franzyk, Henrik; Olsen, Carl Erik; Jensen, Søren Rosendal

    2004-01-01

    Two unique 2-(3,4-dihydroxyphenyl)ethyl glycosides, namely, dopaol beta-D-2-ketoglucopyranoside and dopaol beta-D-2,3-diketoglucopyranoside, were isolated from Chelone obliqua together with the iridoid glucoside catalpol, dopaol beta-D-glucopyranoside, descaffeoylverbascoside, and verbascoside. G...

  19. Dopaol 2-keto- and 2,3-diketoglycosides from Chelone obliqua

    DEFF Research Database (Denmark)

    Franzyk, Henrik; Olsen, Carl Erik; Jensen, Søren Rosendal

    2004-01-01

    Two unique 2-(3,4-dihydroxyphenyl)ethyl glycosides, namely, dopaol beta-D-2-ketoglucopyranoside and dopaol beta-D-2,3-diketoglucopyranoside, were isolated from Chelone obliqua together with the iridoid glucoside catalpol, dopaol beta-D-glucopyranoside, descaffeoylverbascoside, and verbascoside. G...

  20. Development of synthetic volatile attractant for maleEctropis obliqua moths

    Institute of Scientific and Technical Information of China (English)

    SUN Xiao-ling; LI Xi-wang; XIN Zhao-jun; HAN Juan-juan; RAN Wei; LEI Shu

    2016-01-01

    The tea geometridEctropis obliquais one of the most serious leaf-feeding insect pests in tea (Camelia sinensis) in East Asia. Although several volatile chemicals emitted from tea plants have been reported to be attractive toE. obliqua moths, no synthetic attractants for E. obliqua moths have been developed. By measuring the behavioral responses of the moth to a series of chemicals in the lab, we found that a blend containing a ternary mixture containing (Z)-3-hexenal, (Z)-3-hexenyl hexanoate and benzyl alcohol clearly attracted toE. obliqua moths of both sex and that (Z)-3-hexenyl acetate could enhance the attractiveness of the ternary blend. Moreover, we found that the volatiles emitted from the plant-E. obliqua larva com-plex have the same attractiveness as: 1) the blend of volatiles containing the ternary mixture and 2) the blend containing (Z)-3-hexenyl acetate plus the ternary mixture to both male and female moths. In a ifeld bioassay, more male moths were observed on traps that were baited with the blend containing (Z)-3-hexenyl acetate plus the ternary mixture than on control traps. Our study raises the tantalizing possibility that synthetic blends could be deployed as attractants for pests in the ifeld.

  1. Selection of oviposition sites by wild Anastrepha obliqua (Macquart) (Diptera: Tephritidae) based on the nutritional composition

    Energy Technology Data Exchange (ETDEWEB)

    Fontellas-Brandalha, Tania M.L.; Zucoloto, Fernando S. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Biologia]. E-mail: zucoloto@ffclrp.usp.br

    2004-09-15

    Few works have studied in detail the types of nutrients associated to hosts which are attractive to females of Anastrepha obliqua (Macquart) and influence the choice of the oviposition site. The relationship of the males in the physiology and in the behavior of those females has also been scarcely studied and some ecological relationships seem to be quite important for the knowledge of this species' biology. Our objective in this study was to evaluate the discriminatory behavior of A. obliqua between oviposition sites containing different nutrients. The presence of the male and the nutritional status of the female were also considered in this work. Two experiments were developed: in the first, the preference of A. obliqua females between artificial oviposition substrates was evaluated; in the second, females were submitted to two types of artificial oviposition substrates in the presence and in the absence of males and were fed either on a poor diet or on an adequate diet concerning sucrose concentration. In the first experiment, A. obliqua showed higher preference for substrates containing brewer's yeast and sucrose. Substrate containing only yeast was the second most accepted. Offspring development and adult feeding may have determined the choice for the substrate containing brewer's yeast and sucrose. In addition, the presence of protein in the brewer's yeast may indicate nutritional quality to the females in a more accurate way than the sucrose. In the second experiment, the brewer's yeast was the most accepted by the females. The male absence was also an important factor in the selection of hosts and in the egg production of A. obliqua. (author)

  2. Selection of oviposition sites by wild Anastrepha obliqua (Macquart) (Diptera: Tephritidae) based on the nutritional composition

    International Nuclear Information System (INIS)

    Fontellas-Brandalha, Tania M.L.; Zucoloto, Fernando S.

    2004-01-01

    Few works have studied in detail the types of nutrients associated to hosts which are attractive to females of Anastrepha obliqua (Macquart) and influence the choice of the oviposition site. The relationship of the males in the physiology and in the behavior of those females has also been scarcely studied and some ecological relationships seem to be quite important for the knowledge of this species' biology. Our objective in this study was to evaluate the discriminatory behavior of A. obliqua between oviposition sites containing different nutrients. The presence of the male and the nutritional status of the female were also considered in this work. Two experiments were developed: in the first, the preference of A. obliqua females between artificial oviposition substrates was evaluated; in the second, females were submitted to two types of artificial oviposition substrates in the presence and in the absence of males and were fed either on a poor diet or on an adequate diet concerning sucrose concentration. In the first experiment, A. obliqua showed higher preference for substrates containing brewer's yeast and sucrose. Substrate containing only yeast was the second most accepted. Offspring development and adult feeding may have determined the choice for the substrate containing brewer's yeast and sucrose. In addition, the presence of protein in the brewer's yeast may indicate nutritional quality to the females in a more accurate way than the sucrose. In the second experiment, the brewer's yeast was the most accepted by the females. The male absence was also an important factor in the selection of hosts and in the egg production of A. obliqua. (author)

  3. Condition dependence and the nature of genetic variation for male sex comb bristle number in Drosophila melanogaster.

    Science.gov (United States)

    Ahuja, Abha; De Vito, Scott; Singh, Rama S

    2011-04-01

    Genetic architecture of variation underlying male sex comb bristle number, a rapidly evolving secondary sexual character of Drosophila, was examined. First, in order to test for condition dependence, diet was manipulated in a set of ten Drosophila melanogaster full-sib families. We confirmed heightened condition dependent expression of sex comb bristle number and its female homologue (distal transverse row bristles) as compared to non-sex sternopleural bristles. Significant genotype by environment effects were detected for the sex traits indicating a genetic basis for condition dependence. Next we measured sex comb bristle number and sternopleural bristle number, as well as residual mass, a commonly used condition index, in a set of thirty half-sib families. Sire effect was not significant for sex comb and sternopleural bristle number, and we detected a strong dominance and/or maternal effect or X chromosome effect for both traits. A strong sire effect was detected for condition and its heritability was the highest as compared to sex comb and sternopleural bristles. We discuss our results in light of the rapid response to divergent artificial selection for sex comb bristle number reported previously. The nature of genetic variation for male sex traits continues to be an important unresolved issue in evolutionary biology.

  4. Effects of Bristle Hardness & Duration of Manual Tooth brushing on Plaque Control

    Directory of Open Access Journals (Sweden)

    . Sunny

    2017-03-01

    Full Text Available Background: Oral health is an integral part of general health. Poor oral health can have adverse effect on general health hence a good oral health is very essential, which in turn is achieved by good oral hygiene. Even though, the concept of good oral hygiene evolved 5000 years back, it is only in the beginning of 19th century it gained more importance. (1 Dental caries and periodontal disease are the most commonly occurring diseases affecting mankind. Dental plaque is a very important factor in the causation of both the diseases. (2 Aims & Objectives: To evaluate efficacy of four different types of toothbrushes, with difference in duration of brushing along with different bristle hardness in removal of microbial plaque. Material & Methods: In a randomized controlled trial, four groups with 40 subjects used manual toothbrushes with either hard, medium, soft and ultra-soft bristles. On baseline examination, clinical parameter plaque index (Sillness & Loe, 1964 was recorded. Selected subjects were refrained from all kinds of oral hygiene measures for 24 hrs before clinical appointment. On the day of clinical appointment scores of pre and post brushing were recorded in each patient when brushing time was set for 1 minute and same procedure was repeated after a wash off period of 3 days and similar recordings were made with brushing time of 11/2minute. Primary outcome was measured with differences in the plaque index (Sillness & Loe, 1964 compared to baseline. Results: Significant reduction in mean value of plaque score was observed on comparing pre-brushing and post-brushing data in all the subjects irrespective of bristle hardness in both 1 minute and 11/2 minute groups. On increasing time duration from 1 minute to 11/2 minute intergroup comparison revealed that significant correlation exist in mean plaque score reduction in subjects using medium bristle brush, soft bristle brush, ultra-soft bristle brush. However, no significant reduction in

  5. Proton activation studies of changes in mineral composition of Eucalyptus obliqua due to Phytophthora cinnamomi

    International Nuclear Information System (INIS)

    Chaudhri, M.A.; Lee, M.M.; Rouse, J.L.; Weste, G.

    1978-01-01

    As part of a study of disease caused by Phytophthora cinnamomi in native vegetation, the mineral composition of diseased plants has been compared with those free from disease, but grown under the same conditions. Using proton activation it has been shown that a reduction of 70% in iron and 41% in titanium occurs for diseased Eucalytus obliqua compared with disease-free plants. The reduction in iron is associated with severe chlorosis which occurs as a primary symptom in most plants attacked by this pathogen. (author)

  6. Effect of sucrose ingestion on the performance of wild Anastrepha obliqua (Macquart) females (Diptera: Tephritidae)

    International Nuclear Information System (INIS)

    Fontellas, Tania M.L.; Zucoloto, Fernando S.

    2003-01-01

    Carbohydrates are the main source of energy for insects and the lack of these nutrients in the diet can cause serious damage to the biology of these arthropods. In order to better understand the effect of sucrose on the performance and dietary selection of adult Anastrepha obliqua (Macquart), the following experiments were carried out: 1) effect of different amount of sucrose on diet ingestion, longevity and egg production; 2) dietary selection that contains different amounts of sucrose, and 3) discrimination threshold for sucrose in adult individuals deprived or not of carbohydrates. The control diet showed the best results in relation to ingestion, longevity and egg production for these species, probably due to the fact that it presents an optimal nutritional balance between sucrose and yeast. The control diet was also the preferred diet of females, indicating a positive correlation between the nutritional value of a diet and chemical perception by A. obliqua. Sucrose-deprived females were able to perceive lower carbohydrate quantity than non-deprived females. This characteristic might represent a biological advantage since it reduces the food foraging time for these insects. (author)

  7. Midgut Protease Activity During Larval Development of Anastrepha obliqua (Diptera: Tephritidae) Fed With Natural and Artificial Diet

    Science.gov (United States)

    Rivera-Ciprian, José Pedro; Aceituno-Medina, Marysol; Guillen, Karina

    2017-01-01

    Abstract In this study, we examined the activity of two serine proteases (chymotrypsin and trypsin) and two metalloproteases (carboxypeptidases A and B) during larval development in Anastrepha obliqua fed natural (mango fruit) and artificial (formulation used in mass-rearing) diets. Proteolytic activity of chymotrypsin, trypsin, carboxypeptidase A, and carboxypeptidase B was detected in the midgut of different instars of A. obliqua and was strongly affected by the pH and diet type. The protein content of the natural and artificial diets was similar. Enzymatic activity was higher in the midgut of the larvae fed the natural diet than in larvae fed the artificial diet. The activity of the endopeptidases (chymotrypsin and trypsin) was lower than those of the exopeptidases (carboxypeptidases A and B). The pH of the midgut varied from acidic to neutral. The results indicate that in the midgut of the larvae reared on both types of diet, the level of carboxypeptidase activity was approximately 100-fold greater than the level of chymotrypsin activity and 10,000-fold greater than the level of trypsin. In conclusion, carboxypeptidase A and B are the main proteases involved in the digestion of proteins in the larvae of A. obliqua. The natural diet showed a high bioaccessibility. A clear tendency to express high activities of chymotrypsin and trypsin was observed by the third instar. Our research contributes to the planning and development of novel bioaccessibility assays to understand the nutrition processing of A. obliqua larvae under mass-rearing conditions for sterile insect technique.

  8. Insect growth regulatory activity of Vitex trifolia and Vitex agnus-castus essential oils against Spilosoma obliqua.

    Science.gov (United States)

    Tandon, Shishir; Mittal, Ashutosh K; Pant, A K

    2008-06-01

    Essential oils of Vitex trifolia and Vitex agnus-castus were evaluated against Vth instar larvae of Spilosoma obliqua, when applied topically on the dorsal side of mesothoracic region, for insect growth regulatory activity. This treatment caused extended larval period and pupal period, increase in larval mortality and adult deformity and decrease in adult emergence, fecundity of female and egg fertility of test insect.

  9. Female Adolescent Presenting With Abdominal Pain: Accidental Wire Bristle Ingestion Leading to Colonic Perforation.

    Science.gov (United States)

    Di Guglielmo, Matthew; Savage, Jillian; Gould, Sharon; Murphy, Stephen

    2017-05-01

    Abdominal pain in female adolescents is a common presentation to both the emergency department and the outpatient pediatric clinic. The broad differential diagnosis for abdominal pain requires a high index of suspicion to make an accurate diagnosis of foreign body ingestion as the etiology. Foreign body ingestion occurs in all age groups, but sequelae of gastrointestinal tract perforation in children are rare. Treatment for perforation requires consultation of the pediatric general surgeon. Clinicians should take care to not overlook subtle imaging findings or dietary/exposure history, even in the context of a patient with known history of abdominal pain. We report the accidental ingestion of a wire bristle from a grill cleaning brush by a female adolescent. The patient, previously treated and seen for constipation and irritable bowel syndrome in the outpatient gastroenterology clinic, was referred to the emergency department after identification of a foreign body on abdominal radiography. Emergency department physicians discovered the history of grilling and consumption of grilled food, facilitating diagnosis of a wire bristle as the foreign body. The metallic foreign body had migrated to the colon, where it perforated and lodged into the abdominal wall, causing acute, focal symptoms. Observation in the hospital with pain control and infection management allowed for elective laparoscopy. The surgical team removed the object with minimal morbidity and avoided laparotomy. Reports of unintended ingestion of wire bristles have been increasingly reported in the literature; however, most focus on injury to the upper airway or upper digestive tract and subsequent endoscopic or laryngoscopic removal. Most reports detail injury in adult patients, pediatric case reports with digestive tract injury are uncommon, and foreign body removal after lower digestive tract injury in children from a wire bristle has not been reported. We caution pediatric emergency medicine and

  10. Use of gamma radiation against Ceratitis capitata (Wied., 1824), Anastrepha Fraterculus (Wied., 1830) and Anastrepha Obliqua (Macquart, 1835) (Diptera, Tephritidae) for disinfestation of mangoes for exportation

    International Nuclear Information System (INIS)

    Raga, A.

    1990-04-01

    The gamma radiation doses to attend quarantine requirements of importing countries, by disinfecting mango fruits from Ceratitis capitata (Wied., 1824), Anastrepha Fraterculus (Wied., 1830) and Anastrepha Obliqua (Macquart, 1835) is studied. An increase of radiation resistance of C. capitata eggs was observed during the embryonic development. Doses up to 40 Gy for C. capitata and up to 100 Gy for A. Fraterculus and A. Obliqua did not affect pupation of 4-,5-,6- and 7-day-old larvae, irradiated 'in vitro'. Larvae of C. capitata were more resistant than A. Obliqua and A. Fraterculus. Larvae of A. Obliqua were more resistant than A. Fraterculus. The dose of 125.5 Gy fulfilled the criteria for efficacy, which prevented emergence of the adults of three fruit fly species studied. (author)

  11. Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae

    Directory of Open Access Journals (Sweden)

    Cresoni-Pereira Carla

    2001-01-01

    Full Text Available Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835 wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed.

  12. Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae)

    International Nuclear Information System (INIS)

    Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio

    2001-01-01

    Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835) wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed. (author)

  13. Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae)

    Energy Technology Data Exchange (ETDEWEB)

    Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Biologia

    2001-11-15

    Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835) wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed. (author)

  14. Proton activation studies of changes in mineral composition of eucalyptus obliqua due to phytophthora cinnamomi

    International Nuclear Information System (INIS)

    Chaudri, M.A.; Lee, M.M.; Rouse, J.L.; Weste, G.

    1978-01-01

    As part of a study of disease caused by Phytophthora cinnamomi in native vegetation, the mineral composition of diseased plants was compared with those free from disease, but grown under the same conditions. Young plants of Eucalyptus obliqua, three years old and with well-formed lignotubers, were selected (a) diseased plant from soil containing a high concentration of P. cinnamomi, and (b) unaffected plant from an adjacent area where the soil was free from this pathogen. The plants were ashed and their mineral composition was compared by activation analysis using proton beams from the Melbourne University Cyclotron. Results showed a 70% reduction in iron and 41% in titanium from diseased plants compared with disease-free plants. The reduction in iron is associated with severe chlorosis which occurs as a primary symptom in most plants attacked by this pathogen

  15. Preliminary studies for the colonization of Anastrepha obliqua and Anastrepha serpentina (Diptera: Tephritidae)

    International Nuclear Information System (INIS)

    Celedonio H, H.; Enkerlin H, W.; Bruzzone, D.

    1999-01-01

    A series of trials were carried out with the aim of collecting preliminary data for the colonization of Anastrepha obliqua and Anastrepha serpentina. Trials were focused on evaluating adequate oviposition media as well as their effect on fly demographic parameters; the effect of cage population densities on demographic parameters was also considered; for A. serpentina, egg disinfection treatments by organic acids was assayed, and a screening study was carried out for suitable pupation media. Nylon-made egging mesh resulted in the most efficient oviposition medium, while low insect densities provided the best conditions for increased rates of fly fertility. Organic acids (methyl-p-hydroxy-benzoic) were found to hamper egg hatch, while a variety of pupation media provided improved fly emergence rates vs. the naked pupation method. (author)

  16. Procedures for mass rearing the West Indian fruit fly, Anastrepha obliqua

    International Nuclear Information System (INIS)

    Moreno, M.P.; Gomez Simuta, Y.; Zavala Lopez, J.L.

    1999-01-01

    A series of bioassays resulted in a promising colony of Anastrepha obliqua (Macquart) for artificial production. A new model circular cage has been designed to achieve an increase in density of adults per cages, thus resulting in an increase in egg production. A bioassay for best egg production as well as constant hydration of eggs until collection time was chosen. Cotton fabric gave the best results of the fabrics used in the oviposition panel. A new diet based on corn cob particles and with citrus acid instead of hydrochloric acid was tested and showed promising results in good production, quality and less risk in handling. The optimum humidity range for larva to pupa conversion was found to be 70-80%. (author)

  17. Disinfestation of Averrhoa carambola infested with Anastrepha obliqua (Macquart, 1835) (Diptera - Tephritidae) using gamma radiation

    International Nuclear Information System (INIS)

    Arthur, V.; Wiendl, F.M.

    1994-01-01

    The disinfestation dose of gamma radiation in Averrhoa carambola infested with larvae of Anastrepha obliqua was determined. Fruits were collected in the field, each having about 11 larvae in the last instar. Fruits were irradiated with the following ganna radiation doses: 0 (control), 50, 150, 300, 600 and 900 Gy. Each treatment consisted of 9 fruits (3 replications) giving the amount of 99 larvae for each treatment. After irradiation the fruits were kept in a climatic chamber with the temperature adjusted to 25± 5 0 C and relative humidity of 70± 5 0 C, until larvae left the fruit and became transformed into pupae and adults. The lethal dose (LD 100 ) of gamma radiation for larvae in the fuits was 600 Gy and the dose of 50 Gy inhibited completely the total emergency of adults. (author). 19 refs, 1 figs, 1 tab

  18. Benzalkonium Chloride Provides Remarkable Stability to Liquid Protein Lures for Trapping Anastrepha obliqua (Diptera: Tephritidae).

    Science.gov (United States)

    Lasa, R; Williams, T

    2017-12-05

    Hydrolyzed protein lures are widely used to monitor fruit fly pests but are rapidly degraded by microbial activity and must be replaced frequently. To improve the stability of lures, the quaternary ammonium biocide, benzalkonium chloride (BC), was evaluated in mixtures with two hydrolyzed proteins commonly used to monitor Anastrepha spp. The mean number of Anastrepha obliqua adults captured during six consecutive weeks using Captor + borax with the addition of 240 mg BC/liter, not renewed during the test, was similar to Captor + borax that was replaced at weekly intervals and was more effective than Captor + borax without BC. Numbers of A. obliqua flies captured in 30% CeraTrap diluted in water containing 240 mg BC/liter were similar to those caught in traps baited with Captor + borax or 30% CeraTrap without BC in the first 9 d of evaluation but was significantly more effective than both lures after 56 d. After >2 mo of use, 30% CeraTrap containing 240 mg BC/liter remained as effective as newly prepared 30% CeraTrap. The addition of BC to lures reduced surface tension of liquid lures by ~40-50%. However, when BC was increased to 720 mg BC/liter, only a small additional reduction in surface tension was observed and higher concentrations of BC did not increase capture rates. These findings could contribute to reduced costs for trapping networks and the development of long-lasting formulations of liquid protein lures for bait stations and mass-trapping targeted at major tephritid pests. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  19. Best Host Age of Anastrepha obliqua (Diptera: Tephritidae) for Multiplication of Four Native Parasitoids from the Americas

    Science.gov (United States)

    Poncio, S; Montoya, P; Cancino, J; Nava, D E

    2018-01-01

    Abstract The success of the mass rearing of parasitoids is directly related to host quality, and it requires selecting the best biological host age to ensure the optimal performance of the parasitoids released into the field. The larval development of the parasitoids Utetes anastrephae (Viereck) (Hymenoptera: Braconidae) and Odontosema anastrephae Borgmeier (Hymenoptera: Eucoilidae) and the pupal development of the parasitoids Coptera haywardi (Ogloblin) (Hymenoptera: Diapriidae) and Dirhinus sp. (Hymenoptera: Chalcididae) on the native host Anastrepha obliqua (Macquart) (Diptera: Tephritidae) in different larvae and pupae ages were investigated under laboratory conditions. Not all parasitoid species developed with the same efficiency in immature individuals of A. obliqua; U. anastrephae and C. haywardi showed the higher parasitism rates. The emergence and parasitism of U. anastrephae were equal using larvae from 5 to 8 d, while C. haywardi reared in 1- to 8-d-old pupae showed higher averages of parasitism. These results suggest that native parasitoids can be used to strengthen the implementation of biological control projects against A. obliqua, a pest of economic importance in South America.

  20. Functional Characteristics, Electrophysiological and Antennal Immunolocalization of General Odorant-Binding Protein 2 in Tea Geometrid, Ectropis obliqua

    Directory of Open Access Journals (Sweden)

    Ya-Li Zhang

    2018-03-01

    Full Text Available As one of the main lepidopteran pests in Chinese tea plantations, Ectropis obliqua Warren (tea geometrids can severely decrease yields of tea products. The olfactory system of the adult tea geometrid plays a significant role in seeking behaviors, influencing their search for food, mating partners, and even spawning grounds. In this study, a general odorant-binding protein (OBP gene, EoblGOBP2, was identified in the antennae of E. obliqua using reverse transcription quantification PCR (RT-qPCR. Results showed that EoblGOBP2 was more highly expressed in the antennae of males than in females relative to other tissues. The recombinant EoblGOBP2 protein was prepared in Escherichia coli and then purified through affinity chromatography. Ligand-binding assays showed that EoblGOBP2 had a strong binding affinity for some carbonyl-containing tea leaf volatiles (e.g., (E-2-hexenal, methyl salicylate, and acetophenone. Electrophysiological tests confirmed that the male moths were more sensitive to these candidate tea plant volatiles than the female moths. Immunolocalization results indicated that EoblGOBP2 was regionally confined to the sensilla trichoid type-II in the male antennae. These results indicate that EoblGOBP2 may be primarily involved in the olfactory activity of male E. obliqua moths, influencing their ability to sense tea leaf volatiles. This study provides a new perspective of insect GOBPs and implies that olfactory function can be used to prevent and control the tea geometrid.

  1. Tea saponin reduces the damage of Ectropis obliqua to tea crops, and exerts reduced effects on the spiders Ebrechtella tricuspidata and Evarcha albaria compared to chemical insecticides

    Directory of Open Access Journals (Sweden)

    Chi Zeng

    2018-03-01

    Full Text Available Background Tea is one of the most economically important crops in China. However, the tea geometrid (Ectropis obliqua, a serious leaf-feeding pest, causes significant damage to tea crops and reduces tea yield and quality. Spiders are the most dominant predatory enemies in the tea plantation ecosystem, which makes them potentially useful biological control agents of E. obliqua. These highlight the need for alternative pest control measures. Our previous studies have shown that tea saponin (TS exerts insecticidal activity against lepidopteran pests. Here, we investigate whether TS represents a potentially new alternative insecticide with no harm to spiders. Methods We investigated laboratory bioactivities and the field control properties of TS solution against E. obliqua. (i A leaf-dip bioassay was used to evaluate the toxicity of TS to 3rd-instar E. obliqua larvae and effects of TS on the activities of enzymes glutathione-S-transferase (GST, acetylcholinesterase (AChE, carboxylesterase (CES and peroxidase (POD of 3rd-instar E. obliqua larvae in the laboratory. (ii Topical application was used to measure the toxicity of 30% TS (w/v and two chemical insecticides (10% bifenthrin EC and 50% diafenthiuron SC to two species of spider, Ebrechtella tricuspidata and Evarcha albaria. (iii Field trials were used to investigate the controlling efficacy of 30% TS against E. obliqua larvae and to classify the effect of TS to spiders in the tea plantation. Results The toxicity of TS to 3rd-instar E. obliqua larvae occurred in a dose-dependent manner and the LC50 was 164.32 mg/mL. Activities of the detoxifying-related enzymes, GST and POD, increased in 3rd-instar E. obliqua larvae, whereas AChE and CES were inhibited with time by treatment with TS. Mortalities of E. tricuspidata and E. albaria after 48 h with 30% TS treatment (16.67% and 20%, respectively were significantly lower than those with 10% bifenthrin EC (80% and 73.33%, respectively and 50

  2. Effect of varying solid membrane area of bristled wings on clap and fling aerodynamics in the smallest flying insects

    Science.gov (United States)

    Ford, Mitchell; Kasoju, Vishwa; Santhanakrishnan, Arvind

    2017-11-01

    The smallest flying insects with body lengths under 1.5 mm, such as thrips, fairyflies, and some parasitoid wasps, show marked morphological preference for wings consisting of a thin solid membrane fringed with long bristles. In particular, thrips have been observed to use clap and fling wing kinematics at chord-based Reynolds numbers of approximately 10. More than 6,000 species of thrips have been documented, among which there is notable morphological diversity in bristled wing design. This study examines the effect of varying the ratio of solid membrane area to total wing area (including bristles) on aerodynamic forces and flow structures generated during clap and fling. Forewing image analysis on 30 species of thrips showed that membrane area ranged from 16%-71% of total wing area. Physical models of bristled wing pairs with ratios of solid membrane area to total wing area ranging from 15%-100% were tested in a dynamically scaled robotic platform mimicking clap and fling kinematics. Decreasing membrane area relative to total wing area resulted in significant decrease in maximum drag coefficient and comparatively smaller reduction in maximum lift coefficient, resulting in higher peak lift to drag ratio. Flow structures visualized using PIV will be presented.

  3. Use of pig by-products (bristles and hooves) as alternative protein raw material in fish feed

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni; Ekmann, K.S.; Frørup, J.

    2017-01-01

    Increasing growth in the aquaculture industry calls for employment of innovative technologies that will ensure sustainability in the sector, given the rising competition for feed raw material. A technology that can convert low quality biological waste resources such as pig bristles and hooves int...

  4. VOLUME AND TAPER EQUATIONS FOR COMMERCIAL STEMS OF Nothofagus obliqua AND N. alpina

    Directory of Open Access Journals (Sweden)

    Hernan Attis Beltran

    2017-09-01

    Full Text Available Timber volume of standing trees is essential information for management decisions. The increasing need to optimize the potential capacity of forests maintaining their conservation, requires the quantification of the different potential possible timber products. The aim was to adjust taper equations to determine volumes of different timber products for commercial stems of Nothofagus alpina and N. obliqua. Trees of both species were randomly selected in harvesting areas of Lanin National Park (Argentina. Trees were felled and cut into commercial logs, measuring diameter with bark at different heights up to the beginning of the crown, and for each tree the diameter at breast height and total height. Five taper equations were selected and non-linear regression processes were employed for the fittings. We obtained the volume through the integration of the stem profile equation and the rotation in the space thereof through solid of revolution. The Bennet and Swindel (1972 model was selected for both Nothofagus species, obtaining similar equation parameters and differences were observed at the top of the stems of larger trees. For this the use of an integrated model is not recommended. With the obtained equations it is possible to: (i estimatevolume at different heights and for different commercial diameters, and (ii predict the height at which both species reach to a certain diameter. The model presented some statistical limitations (e.g. multicollinearity, however, the fitting of the equation and the easy understanding of the outputs support it as a useful tool in a broad range of forest applications.

  5. Bristle-sensors—low-cost flexible passive dry EEG electrodes for neurofeedback and BCI applications

    Science.gov (United States)

    Grozea, Cristian; Voinescu, Catalin D.; Fazli, Siamac

    2011-04-01

    In this paper, we present a new, low-cost dry electrode for EEG that is made of flexible metal-coated polymer bristles. We examine various standard EEG paradigms, such as capturing occipital alpha rhythms, testing for event-related potentials in an auditory oddball paradigm and performing a sensory motor rhythm-based event-related (de-) synchronization paradigm to validate the performance of the novel electrodes in terms of signal quality. Our findings suggest that the dry electrodes that we developed result in high-quality EEG recordings and are thus suitable for a wide range of EEG studies and BCI applications. Furthermore, due to the flexibility of the novel electrodes, greater comfort is achieved in some subjects, this being essential for long-term use.

  6. Reproductive parameters of Lonomia obliqua Walker, 1855 (Lepidoptera: Saturniidae in laboratory

    Directory of Open Access Journals (Sweden)

    Lisete Maria Lorini

    2004-08-01

    Full Text Available Lonomia obliqua is an insect that has urticant spines in the larval stage. This species may cause death as a result of haemorrhages caused by a toxin released from the caterpillar's spines onto the skin of the victim. Since 1989 when this species was identified in Rio Grande do Sul, Brazil, many accidents have happened. The aim of this study was to verify the oviposition, fecundity, fertility, viability of eggs and incubation period of the species. Adults were left in a moth's cage to mate and lay eggs. Thirteen couples were observed daily, and the number of eggs and the caterpillars emerged were recorded. The results showed a mean of 2.8 (± 1.3 ovipositions, a mean fecundity of 135.3 (± 54.4 eggs/female, a mean fertility of 111.9 (± 55.4 eggs/female, a mean egg viability of 80.9 (± 20.97 % and a mean incubation period of 31.8 (± 5.8 days.O objetivo desse trabalho foi estudar os parâmetros biológicos de oviposição, fecundidade, fertilidade, viabilidade dos ovos e período de incubação de Lonomia obliqua Walker, 1855, em laboratório. As lagartas foram coletadas no campo nos municípios de Santa Cruz do Sul, Erechim, Guaporé, Passo Fundo, Não-Me-Toque, São Jorge, Farroupilha e Vila Lângaro, no Rio Grande do Sul, e Concórdia em Santa Catarina. As lagartas foram mantidas em sala de criação, com a leitura diária da temperatura e umidade relativa do ar, até a emergência dos adultos. Após a sexagem, cada casal foi colocado em uma gaiola para acasalamento e postura. Acompanhou-se, diariamente, as posturas das fêmeas e a eclosão das lagartas, determinando-se o número de posturas por fêmea, a fecundidade, a fertilidade, a viabilidade e o período de incubação dos ovos. O número médio de oviposições foi de 2,8 (± 1,3, fecundidade média de 135,30 (± 54,4 ovos por fêmea, fertilidade média de 111,9 (± 55,4 ovos por fêmea. A viabilidade média dos ovos foi de 80,9 (± 21,0 % e obteve-se um período médio de incuba

  7. Carambola Cultivar, Fruit Ripeness, and Damage by Conspecific Larvae Influence the Host-Related Behaviors of Anastrepha obliqua (Diptera: Tephritidae).

    Science.gov (United States)

    López-Ley, Jorge Ulises; Toledo, Jorge; Malo, Edi A; Gomez, Jaime; Santiesteban, Antonio; Rojas, Julio C

    2016-02-01

    In this study, we investigated the influence of cultivar type, fruit ripeness, and damage by conspecific larvae on the attraction of Anastrepha obliqua (Macquart) (Diptera: Tephritidae) to and oviposition on carambola fruit (Averroha carambola L.). The attraction of both sexes of A. obliqua to fruit of different quality was evaluated through cage experiments in the field, and the oviposition preferences of mated females were examined in laboratory tests. Both sexes, mated or virgin, were more attracted to the "Maha" fruit than to the "Golden Star" fruit, and the females oviposited more frequently on the Maha cultivar than the Golden Star cultivar. Both sexes were more attracted to ripe and half-ripe Maha fruits than to mature green fruit, and although females did not show a preference for ovipositing on half-ripe or ripe fruits, they did not oviposit on mature green fruits. Males did not show a preference for the volatiles from uninfested, artificially damaged, or infested Maha fruits, but females were more attracted to uninfested fruits than to artificially damaged and infested Maha fruits. Furthermore, females preferred to oviposit on uninfested fruits compared with artificially damaged fruit, and they did not oviposit on infested fruits. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Effect of Resin Ducts and Sap Content on Infestation and Development of Immature Stages of Anastrepha obliqua and Anastrepha ludens (Diptera: Tephritidae) in Four Mango (Sapindales: Anacardiaceae) Cultivars.

    Science.gov (United States)

    Guillén, Larissa; Adaime, Ricardo; Birke, Andrea; Velázquez, Olinda; Angeles, Guillermo; Ortega, Fernando; Ruíz, Eliel; Aluja, Martín

    2017-04-01

    We determined the influence of resin ducts, sap content, and fruit physicochemical features of four mango cultivars (Criollo, Manila, Ataulfo, and Tommy Atkins) on their susceptibility to the attack of the two most pestiferous fruit fly species infesting mangoes in Mexico: Anastrepha ludens (Loew) and Anastrepha obliqua (Macquart). We performed three studies: 1) analysis of resin ducts in mango fruit exocarp to determine the density and area occupied by resin ducts in each mango cultivar, 2) assessment of mango physicochemical features including fruit sap content, and 3) a forced infestation trial under field conditions using enclosed fruit-bearing branches to expose mangoes to gravid A. ludens or A. obliqua females. Infestation rates, development time from egg to prepupae and pupae, pupal weight, and percent of adult emergence, were assessed. 'Ataulfo' and 'Tommy Atkins' cultivars exhibited the highest resin duct density and sap content, the lowest infestation rate, and had a negative effect on immature development and pupal weight. In sharp contrast, 'Manila' and 'Criollo' cultivars, with the lowest resin duct density and sap content, were highly susceptible to A. ludens and A. obliqua attack. We conclude that sap content and the number, size, and distribution of resin ducts as well as firmness in mango fruit exocarp are all involved in the resistance of mango to A. ludens and A. obliqua attack. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Disinfestation of Averrhoa carambola infested with Anastrepha obliqua (Macquart, 1835) (Diptera - Tephritidae) using gamma radiation; Desinfestacao de Averrhoa carambola infestada por Anastrepha obliqua (Macquart, 1835) (Diptera - Tephritidae) atraves de radiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, V.; Wiendl, F.M. [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)

    1994-05-01

    The disinfestation dose of gamma radiation in Averrhoa carambola infested with larvae of Anastrepha obliqua was determined. Fruits were collected in the field, each having about 11 larvae in the last instar. Fruits were irradiated with the following ganna radiation doses: 0 (control), 50, 150, 300, 600 and 900 Gy. Each treatment consisted of 9 fruits (3 replications) giving the amount of 99 larvae for each treatment. After irradiation the fruits were kept in a climatic chamber with the temperature adjusted to 25{+-} 5{sup 0} C and relative humidity of 70{+-} 5{sup 0} C, until larvae left the fruit and became transformed into pupae and adults. The lethal dose (LD{sub 100}) of gamma radiation for larvae in the fuits was 600 Gy and the dose of 50 Gy inhibited completely the total emergency of adults. (author). 19 refs, 1 figs, 1 tab.

  10. Associative learning in wild Anastrepha obliqua females (Diptera, Tephritidae related to a protein source Aprendizagem associativa em fêmeas selvagens de Anastrepha obliqua (Diptera, Tephritidae em relação a uma fonte protéica

    Directory of Open Access Journals (Sweden)

    Carla Cresoni-Pereira

    2006-03-01

    Full Text Available The aim of the present study was to determine whether wild adult Anastrepha obliqua (Macquart, 1835 females are able to associate a compound (quinine sulphate - QS not related to their habitual diet with a protein-enriched food. Females were first fed on diets based on brewer yeast and sucrose containing or not QS. The groups were then allowed to choose between their original diets and a diet with or without QS, depending on the previous treatment, and between a diet based on agar and a diet containing agar and QS. When the nutritional value of the diets was adequate, the females did not show any preference for the diet with or without QS. With respect to the agar diet and the agar + QS diet, females previously fed on a nutritive diet containing QS preferred the diet containing QS, indicating an association between the compound and the nutritional value of the diet. The importance of this behavioral strategy is discussed.O objetivo do presente estudo foi determinar se fêmeas adultas selvagens de Anastrepha obliqua (Macquart, 1835 são capazes de associar um composto (sulfato de quinino-SQ não-relacionado à sua dieta habitual com um alimento rico em proteínas. Primeiro, as fêmeas foram alimentadas com dietas à base de lêvedo de cerveja e sacarose contendo ou não SQ. Os grupos foram então colocados para escolher entre sua dieta original e dietas com ou sem SQ, dependendo do tratamento prévio, e entre uma dieta à base de agar somente e outra à base de agar e SQ. Quando o valor nutricional das dietas era adequado, as fêmeas não mostraram nenhuma preferência para a dieta com ou sem SQ. Em relação às dietas de agar e agar+SQ, fêmeas previamente alimentadas com uma dieta nutritiva contendo SQ preferiram a dieta contendo SQ, indicando uma associação entre o composto e o valor nutricional da dieta. A importância desta estratégia comportamental é discutida.

  11. Pheromone communication in Anastrepha obliqua (Diptera: Tephritidae): A comparison of the volatiles and salivary gland extracts of two wild populations

    Czech Academy of Sciences Publication Activity Database

    Goncalves, G. B.; Silva, C. E.; Mendonca, A. D. L.; Vaníčková, Lucie; Tomčala, Aleš; do Nascimento, R. R.

    2013-01-01

    Roč. 96, č. 4 (2013), s. 1365-1374 ISSN 0015-4040 Institutional support: RVO:61388963 Keywords : salivary glands * volatile compounds * sex attractant * wild population * gas chromatography - mass spectrometry Subject RIV: CE - Biochemistry Impact factor: 1.056, year: 2013

  12. Observations on habitat use, breeding chronology and parental care in Bristle-thighed Curlews on the Seward Peninsula, Alaska

    Science.gov (United States)

    Gill, R.E.; Lanctot, Richard B.; Mason, J.D.; Handel, Colleen M.

    1991-01-01

    Results from an intensive survey in 1989 of one of the two known breeding localities of Bristle-thighed Curlews Numenius tahitiensis are reported. During the pre-nesting period birds confined most of their activity to two vegetation communities: shrub meadow tundra and low shrub/tussock tundra. During nesting more than half the Curlews seen were observed on shrub meadow tundra, whilst during brood rearing, use of low shrub/tussock tundra continued to decline in importance as birds attending young increased their use of sedge wet meadows. Despite extensive searches no nests were located; however, observations of broods indicated that nest initiation began around 25 May and that hatching occurred during the last week of June. Detailed observations are presented on the formation of four brood-groups, some of which held different combinations of unrelated adults or young. The adaptive significance of this unusual wader behaviour is discussed.

  13. Anastrepha ludens and Anastrepha serpentina (Diptera: Tephritidae) do not infest Psidium guajava (Myrtaceae), but Anastrepha obliqua occasionally shares this resource with Anastrepha striata in nature.

    Science.gov (United States)

    Birke, Andrea; Aluja, Martin

    2011-08-01

    This study examined whether economically important fruit fly species Anastrepha ludens (Loew), Anastrepha serpentina (Wiedemann), and Anastrepha obliqua (Macquart) (Diptera: Tephritidae) may opportunistically exploit guavas, Psidium guajava L. (Myrtaceae), growing near preferred natural hosts. We collected 3,459 kg of guavas and 895 kg of other known host species [sour orange, Citrus aurantium L.; grapefruit, Citrus paradisi Macfadyen; mango, Mangifera indica L.; white sapote, Casimiroa edulis La Llave and Lex.; sapote, Pouteria sapota (Jacq.); sapodilla, Manilkara zapota L.; and wild plum, Spondias purpurea L. and Spondias mombin L.] along an altitudinal gradient over a 4-yr period (2006-2009). Plants were growing in sympatry in 23 localities where the guavas are usually infested in the state of Veracruz, M6xico. The guava samples yielded 20,341 Anastrepha spp. pupae in total (overall mean, 5.88 pupae per kg of fruit). Confirming previous reports, Anastrepha fraterculus (Wiedemann) and Anastrepha striata (Schiner) were found heavily infesting guavas in Veracruz. Importantly, although we did not find evidence that A. ludens and A. serpentina are able to attack this valuable commodity, we document for the first time in the agriculturally important state of Veracruz that P. guajava is an alternative natural host plant of A. obliqua. We recovered two fruit in the mango-growing locality of la Vibora, Tlalixcoyan, that harbored larvae of A. striata and A. obliqua. This finding has important practical implications for management of A. obliqua. Over the entire altitudinal gradient, when individual fruit infestation was examined, a dynamic pattern of species dominance was unveiled with guavas growing below 800 m above sea level mainly attacked by A. striata and a progressive replacement with increasing altitude by A. fraterculus. Interestingly, most individual fruit examined (97%) harbored a single species of fruit fly, a finding that may be taken as evidence of

  14. Nonhost status of commercial Persea americana 'Hass' to Anastrepha ludens, Anastrepha obliqua, Anastrepha serpentina, and Anastrepha striata (Diptera: Tephritidae) in Mexico.

    Science.gov (United States)

    Aluja, Martín; Díaz-Fleischer, Francisco; Arredondo, José

    2004-04-01

    The objective of this study was to determine the host status in Mexico of commercially cultivated and marketed avocado, Persea americana (Mill.), 'Hass' to Anastrepha ludens (Loew), Anastrepha obliqua (Macquart), Anastrepha serpentina (Wiedemann), and Anastrepha striata (Schiner) (Diptera: Tephritidae). Experiments in Michoacán, Mexico, were carried out in six orchards located at three altitudes above sea level during two times (August-October 2001 and April-June 2002). They included choice ('Hass' avocado plus natural host) and no-choice foraging behavior tests on trees under field cages; no-choice, forced infestation trials on caged, fruit-bearing branches in the field, and with individual fruit under laboratory conditions; infestation trials using 'Hass' avocados left unprotected over 1 and 7 d on the ground of orchards; studies to ascertain depth of oviposition and determine egg hatchability; and experiments to determine susceptibility by using time elapsed since removal of fruit from tree as the experimental variable. We trapped adult Anastrepha (n = 7,936) in all orchards and dissected fruit (n = 7,695) from orchards and packing houses (n = 1,620) in search of eggs or larvae. Most (96.7%) A. ludens, A. obliqua, A. striata, and A. serpentina adults were captured in low-elevation orchards. No eggs or larvae were detected in any of the fruit from foraging behavior studies or dissected fruit from orchards or packing houses. Of 5,200 mature, intact fruit on trees in the field forcibly exposed to no-choice female oviposition activity (five females/fruit), we only found four fruit infested by A. ludens but no adults emerged. 'Hass' avocados only became marginally susceptible to attack by A. ludens (but not A. obliqua, A. serpentina, and A. striata) 24 h after being removed from the tree. Fruit placed on the ground in orchards (n = 3,600) were occasionally infested by Neosilba batesi (Curran) (Diptera: Lonchaeidae), a decomposer, but not Anastrepha spp. Based on our

  15. EXTRACT

    DEFF Research Database (Denmark)

    Pafilis, Evangelos; Buttigieg, Pier Luigi; Ferrell, Barbra

    2016-01-01

    The microbial and molecular ecology research communities have made substantial progress on developing standards for annotating samples with environment metadata. However, sample manual annotation is a highly labor intensive process and requires familiarity with the terminologies used. We have the...... and text-mining-assisted curation revealed that EXTRACT speeds up annotation by 15-25% and helps curators to detect terms that would otherwise have been missed.Database URL: https://extract.hcmr.gr/......., organism, tissue and disease terms. The evaluators in the BioCreative V Interactive Annotation Task found the system to be intuitive, useful, well documented and sufficiently accurate to be helpful in spotting relevant text passages and extracting organism and environment terms. Comparison of fully manual...

  16. Influence of male nutritional conditions on the performance and alimentary selection of wild females of Anastrepha obliqua (Macquart)(Diptera, Tephritidae)

    International Nuclear Information System (INIS)

    Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio

    2006-01-01

    The behavior of A. obliqua females is regulated by endogenous and exogenous factors and among these the presence of males. Experiments were carried out to investigate whether the presence of males and their nutritional condition may affect the behavior of self-selection feeding and the performance of A. obliqua females. Females were sorted in groups containing yeast-deprived females and males, and non-yeast deprived females and males. The females were maintained apart from the males by a transparent plastic screen. Several yeast and sucrose combinations were offered to the females in a single diet block or in separate blocks. Ingestion, egg production, longevity and diet efficiency were determined. The non-yeast-deprived males positively influenced the females performance when the latter were fed with yeast and sucrose in distinct diet blocks. Performance was better in the groups without males and with yeast-deprived males where the females could not select the nutrient proportions (yeast and sucrose in a single diet block). (author)

  17. The presence of the sexual partner and nutritional condition alter the Anastrepha obliqua MacQuart (Diptera: Tephritidae) protein discrimination threshold

    Energy Technology Data Exchange (ETDEWEB)

    Cresoni-Pereira, Carla; Zucoloto, Fernando S. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Biologia

    2005-11-15

    The minimum protein amount that Anastrepha obliqua MacQuart can detect in its alimentary source is variable, though the causes of such variation are not very well known. In this study, the authors tested whether the sexual partners nutritional condition and presence devoid of direct contact alter the A. obliqua protein discrimination threshold. Male and female insects were assigned to groups as follows: (1) newly emerged, (2) deprived of protein source (yeast) during 18 days, (3) non-yeast-deprived during 18 days, (4) yeast-deprived in the presence of equally yeast-deprived sexual partners, (5) yeast-deprived in the presence of non-yeast-deprived partners, (6) non-yeast-deprived with yeast-deprived partners and (7) non-yeast-deprived with non-yeast-deprived partners. The sexual partners were maintained apart by a transparent plastic screen with small holes. Not only the males presence but also their nutritional condition have altered the females discrimination threshold, particularly when the females were deprived and when non- deprived females cohabited with deprived males. Therefore, the females threshold was determined by their own nutritional condition in addition to recognition of the males nutritional condition. The males discrimination threshold was higher for non-deprived subjects than for the deprived ones. The occurrence of responses in the absence of direct contact between males and females has shown that they may use a chemical mechanism for mutual recognition of the sexual partner nutritional condition. (author)

  18. The presence of the sexual partner and nutritional condition alter the Anastrepha obliqua MacQuart (Diptera: Tephritidae) protein discrimination threshold

    International Nuclear Information System (INIS)

    Cresoni-Pereira, Carla; Zucoloto, Fernando S.

    2005-01-01

    The minimum protein amount that Anastrepha obliqua MacQuart can detect in its alimentary source is variable, though the causes of such variation are not very well known. In this study, the authors tested whether the sexual partners nutritional condition and presence devoid of direct contact alter the A. obliqua protein discrimination threshold. Male and female insects were assigned to groups as follows: (1) newly emerged, (2) deprived of protein source (yeast) during 18 days, (3) non-yeast-deprived during 18 days, (4) yeast-deprived in the presence of equally yeast-deprived sexual partners, (5) yeast-deprived in the presence of non-yeast-deprived partners, (6) non-yeast-deprived with yeast-deprived partners and (7) non-yeast-deprived with non-yeast-deprived partners. The sexual partners were maintained apart by a transparent plastic screen with small holes. Not only the males presence but also their nutritional condition have altered the females discrimination threshold, particularly when the females were deprived and when non- deprived females cohabited with deprived males. Therefore, the females threshold was determined by their own nutritional condition in addition to recognition of the males nutritional condition. The males discrimination threshold was higher for non-deprived subjects than for the deprived ones. The occurrence of responses in the absence of direct contact between males and females has shown that they may use a chemical mechanism for mutual recognition of the sexual partner nutritional condition. (author)

  19. Influence of male nutritional conditions on the performance and alimentary selection of wild females of Anastrepha obliqua (Macquart)(Diptera, Tephritidae)

    Energy Technology Data Exchange (ETDEWEB)

    Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio [Universidade Federal de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Fac. de Filosofia, Ciencias e Letras. Dept. de Biologia], e-mail: cresoni@usp.br, e-mail: zucoloto@ffclrp.usp.br

    2006-04-15

    The behavior of A. obliqua females is regulated by endogenous and exogenous factors and among these the presence of males. Experiments were carried out to investigate whether the presence of males and their nutritional condition may affect the behavior of self-selection feeding and the performance of A. obliqua females. Females were sorted in groups containing yeast-deprived females and males, and non-yeast deprived females and males. The females were maintained apart from the males by a transparent plastic screen. Several yeast and sucrose combinations were offered to the females in a single diet block or in separate blocks. Ingestion, egg production, longevity and diet efficiency were determined. The non-yeast-deprived males positively influenced the females performance when the latter were fed with yeast and sucrose in distinct diet blocks. Performance was better in the groups without males and with yeast-deprived males where the females could not select the nutrient proportions (yeast and sucrose in a single diet block). (author)

  20. Susceptibility of 15 mango (Sapindales: Anacardiaceae) cultivars to the attack by Anastrepha ludens and Anastrepha obliqua (Diptera:Tephritidae) and the role of underdeveloped fruit as pest reservoirs: management implications

    Science.gov (United States)

    We evaluated the susceptibility of 15 mango cultivars to the attack of Anastrepha ludens and A. obliqua, the main Tephritid pests of this crop in Mexico. In a field experiment, bagged, fruit-bearing branches were exposed to gravid females of both fly species. Infestation rates, developmental time,...

  1. Sexual Competitiveness, Field Survival, and Dispersal of Anastrepha obliqua (Diptera: Tephritidae) Fruit Flies Irradiated at Different Doses.

    Science.gov (United States)

    Gallardo-Ortiz, Uriel; Pérez-Staples, Diana; Liedo, Pablo; Toledo, Jorge

    2018-04-02

    The sterile insect technique (SIT) is used in area-wide pest management programs for establishing low pest prevalence and/or areas free of fruit flies (Diptera: Tephritidae). The aim of this technique is to induce high levels of sterility in the wild population, for this the released insects must have a high sexual competitiveness and field dispersal. However, radiation decreases these biological attributes that do not allow it to compete successfully with wild insects. In this study the sexual competitiveness, field survival and dispersal of Anastrepha obliqua (Macquart; Diptera: Tephritidae) irradiated at 0, 40, 50, 60, 70, and 80 Gy were evaluated in laboratory. A dose of 60 Gy produced 98% sterility, whereas doses of 70 and 80 Gy produced 99% sterility. Sexual competitiveness was assessed in field cages, comparing males irradiated at 0, 50, 60, 70, and 80 Gy against wild males for mating with wild fertile females. Males irradiated at 50 and 60 Gy achieved more matings than those irradiated at 70 and 80 Gy. Wild males were more competitive than mass-reared males, even when these were not irradiated (0 Gy). There was no effect of irradiation on mating latency, yet wild males showed significantly shorter mating latency than mass-reared males. Female remating did not differ among those that mated with wild males and those that mated with males irradiated with different doses. The relative sterility index (RSI) increased from 0.25 at 80 Gy to 0.37 at 60 Gy. The Fried competitiveness index was 0.69 for males irradiated at 70 Gy and 0.57 for those irradiated at 80 Gy, which indicates that a 10 Gy reduction in the irradiation dose produces greater induction of sterility in the wild population. There were no significant differences in field survival and dispersal between flies irradiated at 70 or 80 Gy. Reducing the irradiation dose to 60 or 70 Gy could improve the performance of sterile males and the effectiveness of the SIT. Our results also distinguish between the

  2. Identification and Comparative Study of Chemosensory Genes Related to Host Selection by Legs Transcriptome Analysis in the Tea Geometrid Ectropis obliqua.

    Directory of Open Access Journals (Sweden)

    Long Ma

    Full Text Available Host selection by female moths is fundamental to the survival of their larvae. Detecting and perceiving the non-volatile chemicals of the plant surface involved in gustatory detection determine the host preference. In many lepidopteran species, tarsal chemosensilla are sensitive to non-volatile chemicals and responsible for taste detection. The tea geometrid Ectropis obliqua is one devastating chewing pest selectively feeding on limited plants, requiring the specialized sensors to forage certain host for oviposition. In present study, we revealed the distribution of chemosensilla in the ventral side of female fifth tarsomere in E. obliqua. To investigate its molecular mechanism of gustatory perception, we performed HiSeq 2500 sequencing of the male- and female- legs transcriptome and identified 24 candidate odorant binding proteins (OBPs, 21 chemosensory proteins (CSPs, 2 sensory neuron membrane proteins (SNMPs, 3 gustatory receptors (GRs and 4 odorant receptors (ORs. Several leg-specific or enriched chemosensory genes were screened by tissue expression analysis, and clustered with functionally validated genes from other moths, suggesting the potential involvement in taste sensation or other physiological processes. The RPKM value analysis revealed that 9 EoblOBPs showed sex discrepancy in the leg expression, 8 being up-regulated in female and only 1 being over expressed in male. These female-biased EoblOBPs indicated an ecological adaption related with host-seeking and oviposition behaviors. Our work will provide basic knowledge for further studies on the molecular mechanism of gustatory perception, and enlighten a host-selection-based control strategy of insect pests.

  3. There is no magic fruit fly trap: multiple biological factors influence the response of adult Anastrepha ludens and Anastrepha obliqua (Diptera: Tephritidae) individuals to MultiLure traps baited with BioLure or NuLure.

    Science.gov (United States)

    Díaz-Fleischer, Francisco; Arredondo, José; Flores, Salvador; Montoya, Pablo; Aluja, Martín

    2009-02-01

    Field-cage experiments were performed to determine the effectiveness of MultiLure traps (Better World MFG Inc., Fresno, CA) baited with NuLure (Miller Chemical and Fertilizer Corp., Hanover, PA) or BioLure (Suterra LLC, Inc., Bend, OR) in capturing individually marked Mexican fruit fly, Anastrepha ludens (Loew), and West Indian fruit fly, Anastrepha obliqua (Macquart) (Diptera: Tephritidae), of both sexes. Experimental treatments involved wild and laboratory-reared flies of varying ages (2-4 and 15-18 d) and dietary histories (sugar only, open fruit, open fruit plus chicken feces, and hydrolyzed protein mixed with sugar). Data were divided into two parts: total captures over a 24-h period and trap visits/landings, entrances into interior of trap ,and effective captures (i.e., drowning in liquid bait or water) over a 5-h detailed observation period (0600-1100 hours). The response to the two baits varied by fly species, gender, physiological state, age, and strain. Importantly, there were several highly significant interactions among these factors, underlining the complex nature of the response. The two baits differed in attractiveness for A. obliqua but not A. ludens. The effect of strain (wild versus laboratory flies) was significant for A. ludens but not A. obliqua. For effect of dietary history, adults of both species, irrespective of sex, were significantly less responsive to both baits when fed on a mixture of protein and sugar when compared with adults fed the other diets. Finally, we confirmed previous observations indicating that McPhail-type traps are quite inefficient. Considering the total 24-h fly tenure in the cage, and independent of bait treatment and fly type (i.e., strain, adult diet, gender and age), of a total of 2,880 A. obliqua and 2,880 A. ludens adults released into the field cages over the entire study (15 replicates), only 564 (19.6%) and 174 (6%) individuals, respectively, were effectively caught. When only considering the 5-h detailed

  4. Selección de Cepas de Hongos Entomopatógenos para el Manejo de Anastrepha obliqua (Macquart, 1835 (Diptera: Tephritidae en Colombia Selection of Strains of Entomopathogenic Fungi for Management of Anastrepha obliqua (Macquart, 1835 (Diptera: Tephritidae in Colombia

    Directory of Open Access Journals (Sweden)

    Armando Osorio-Fajardo

    2011-12-01

    Full Text Available Se evaluaron 15 cepas de los hongos entomopatógenos Beauveria bassiana y Metarhizium anisopliae sobre adultos de un día de edad de la mosca de la fruta Anastrepha obliqua. El trabajo se realizó con el fin de seleccionar las cepas más virulentas al insecto y estudiar el efecto sobre los adultos jóvenes cuando el hongo era aplicado antes de la emergencia. Mediante un screening con una concentración de 1x10(7 conidias/mL se seleccionaron las tres cepas más virulentas, siendo dos de ellas de Beauveria y una de Metarhizium, las cuales causaron mortalidades del 77%, 71% y 66%. Valores de CL50 de 2,38x10(6, 1,81x10(6 y 9,94x10(6 conidias/mL, respectivamente, fueron determinados para cada una de estas cepas y un TL50 respectivo de 48,12; 56 y 42,75 horas. No se encontraron diferencias significativas en la mortalidad entre hembras y machos. La aspersión de la CL90 de las cepas seleccionadas sobre el medio de pupación de la mosca de la fruta produjo 34-48% de mortalidad durante las 120 horas de evaluación. Los hongos entomopatógenos pueden ser utilizados fácilmente para el control biológico de A. obliqua aplicándolos de manera dirigida a los adultos jóvenes bajo la copa de los árboles, en programas de manejo integrado de plagas.Fifteen strains from entomopathogenic Beauveria bassiana and Metarhizium anisopliae fungi were evaluated on one day-old adults of Anastrepha obliqua fruit fly. Tested were carried out for selecting the most virulent strains and the effectiveness of their use on young adult when the entomopathogen were applied before emergence were studied too. A screening with a 1x10(7 conidia/mL concentration was used for selecting the three most pathogenic isolates, two from Beauveria and one from Metarhizium, having 77, 71 and 66% mortality. The LC50 for these isolates were 2.38x10(6, 1.81x10(6 and 9.94x10(6 conidia/mL, respectively, and a respective LT50 were 48.12, 56 and 42.75 hours. No significant differences were found

  5. Examination of the ligand-binding and enzymatic properties of a bilin-binding protein from the poisonous caterpillar Lonomia obliqua.

    Directory of Open Access Journals (Sweden)

    Ana B G Veiga

    Full Text Available The bilin-binding proteins (BBP from lepidopteran insects are members of the lipocalin family of proteins and play a special role in pigmentation through the binding of biliverdin IXγ. Lopap, a BBP-like protein from the venom of the toxic caterpillar Lonomia obliqua has been reported to act as a serine protease that activates the coagulation proenzyme prothrombin. Here we show that BBPLo, a variant of lopap from the same organism binds biliverdin IXγ, forming a complex that is spectrally identical with previously described BBP proteins. Although BBPLo is nearly identical in sequence to lopap, no prothrombinase activity was detected in our recombinant preparations using reconstituted systems containing coagulation factors Xa and Va, as well as anionic phospholipids. In addition to biliverdin, BBPLo was found to form a 1:1 complex with heme prompting us to examine whether the unusual biliverdin IXγ ligand of BBPs forms as a result of oxidation of bound heme in situ rather than by a conventional heme oxygenase. Using ascorbate or a NADPH(+-ferredoxin reductase-ferredoxin system as a source of reducing equivalents, spectral changes are seen that suggest an initial reduction of heme to the Fe(II state and formation of an oxyferrous complex. The complex then disappears and a product identified as a 5-coordinate carbonyl complex of verdoheme, an intermediate in the biosynthesis of biliverdin, is formed. However, further reaction to form biliverdin was not observed, making it unlikely that biliverdin IXγ is formed by this pathway.

  6. Influence of Pupation Substrate on Mass Production and Fitness of Adult Anastrepha obliqua Macquart (Diptera: Tephritidae) for Sterile Insect Technique Application.

    Science.gov (United States)

    Aceituno-Medina, Marysol; Rivera-Ciprian, José Pedro; Hernández, Emilio

    2017-12-05

    Tephritid mass-rearing systems require an artificial substrate for pupation. Pupation substrate characteristics influence the quality of insects produced. Coconut fiber, as an alternative to the conventional pupation substrate vermiculite, was evaluated for Anastrepha obliqua Macquart (Diptera: Tephritidae) pupation behavior (pupation patterns, distribution, respiration rate, and pupal weight) and adult fitness (adult eclosion time, flight ability, and male mating competitiveness). Pupation percentage at 24 h, pupal weight, and flight ability were not significantly affected by substrate type. Adult eclosion levels of 50% were reached at 29.7 and 41.6 h for coconut fiber and vermiculite, respectively. Pupae distribution patterns differed between substrates because the larval aggregation level was reduced during the pupation process in coconut fiber. The pupae aggregation was three times greater in vermiculite than in coconut fiber. A higher respiratory rate in the last days of pupation and adult eclosion were recorded in the insects maintained in coconut fiber. Coconut fiber suitability as a pupation substrate for quality mass production of pupae and its implications for sterile insect technique are discussed. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Observations on the growth parameters of Spilosoma obliqua (Lepidoptera: Arctiidae) reared on artificial diets and reproductive competence of this irradiated pest and its progeny

    International Nuclear Information System (INIS)

    Rahman, R.; Rahman, M.M.; Islam, S.; Huque, R.

    2002-01-01

    Ten trials were conducted to standardize an artificial diet for Spilosoma oblique. The main ingredients included agar, mulberry leaves, yeast, casein, cellulose, sucrose, glucose, ascorbic acid, sorbic acid, antibiotics, vitamin C, Wesson's salt, and vitamin B complex in variable proportions. A diet formulation with increased amounts of Wesson's salt, choline chloride and iron supplement was found to be most suitable when growth parameters were measured. The deleterious effects when 6-day old pupae were treated with 100 and 150 Gy of gamma radiation were increased in the F 1 generation as compared to the parental generation. Various combinations of crosses between treated and untreated moths indicated that females were more sensitive to gamma radiation when compared to males. F 1 sterility was attained when male moths treated with 100 Gy were allowed to mate with untreated females. Two species of hymenopteran parasitoids of the genus Glyptapanteles and Meteorus were found to infest Spilosoma obliqua. These parasitoids may serve as an effective addition to an integrated pest management program for this pest in Bangladesh. (author)

  8. Comparative Efficacy of a Soft Toothbrush with Tapered-tip Bristles to an ADA Reference Toothbrush on Gingival Abrasion over a 12-Week Period.

    Science.gov (United States)

    Gallob, John; Petrone, Dolores M; Mateo, Luis R; Chaknis, Patricia; Morrison, Boyce M; Panagakos, Foti; Williams, Malcolm

    2016-06-01

    Evaluation of the impact of a soft toothbrush with tapered-tip (Test Toothbrush) bristles and an ADA reference toothbrush (ADA Toothbrush) on gingival abrasion over a 12-week period. This was a randomized, single-center, examiner-blind, two-cell, parallel clinical research study and used the Danser Gingival Abrasion Index to assess the level of gingival abrasion after a single brushing, as well as after six weeks and 12 weeks of twice-daily brushing. Adult male and female subjects from the Central New Jersey, USA area refrained from all oral hygiene procedures for 24 hours. They reported to the study site after refraining from eating, drinking, and smoking for four hours. Following a qualifying examination using plaque and gingivitis scores along with a baseline gingival abrasion examination, subjects were randomized into two balanced groups, each group using one of the two study toothbrushes. Subjects were instructed to brush their teeth for one minute, under supervision, with their assigned toothbrush and a commercially available fluoride toothpaste (Colgate© Cavity Protection Toothpaste), after which they were again evaluated for gingival abrasion. Subjects were dismissed from the study site with their assigned toothbrush and toothpaste, and instructed to brush twice daily at home for the next 12 weeks. The subjects were instructed to brush for one minute during each tooth brushing. The subjects reported to the study site after six weeks and 12 weeks of product use, at which time they were evaluated for gingival abrasion. Seventy-one (71) subjects complied with the protocol and completed the clinical study. The results of this study showed that the Test Toothbrush provided statistically significantly (p ADA Toothbrush after a single tooth brushing, after six weeks, and after 12 weeks of product use (75.0%, 85.5%, 73.9%, respectively). The soft toothbrush with tapered-tip bristles produced significantly less gingival abrasion after 12 weeks of product use as

  9. Mineralización del nitrógeno, carbono y actividad enzimática del suelo en un bosque de Nothofagus obliqua (Mirb Oerst y una plantación de Pinus radiata D. Don. del centro-sur de Chile Nitrogen and carbon mineralization and enzyme activity in soils of Nothofagus obliqua (Mirb Oerst stands and Pinus radiata D. Don plantation in south-central Chile

    Directory of Open Access Journals (Sweden)

    YESSICA RIVAS

    2009-03-01

    Full Text Available En Chile, el establecimiento de plantaciones comerciales de rápido crecimiento ha sido sostenido en las últimas décadas mediante la sustitución de bosques nativos y conversión de suelos agrícolas. Pinus radiata D. Don es la principal especie productiva, debido a su crecimiento acelerado y adaptabilidad al clima y los suelos. En el presente estudio se plantea que la actividad biológica del suelo es variable a través del año, en respuesta a variaciones de precipitación, temperatura y contenido de humedad de suelo y que el cambio de uso de suelo desde un bosque templado de Nothofagus obliqua (Mirb Oerst a una plantación con coniferas exóticas, modifica la química del suelo y consecuentemente los procesos de N-min, C-min y la actividad biológica del suelo. Esta hipótesis fue examinada en un bosque de N. obliqua y una plantación de P. radiata del centro-sur de Chile (40°07' S, 72° O. Se evaluó mensualmente la tasa mineralización de nitrógeno (N-min, cabono (C-min y la actividad enzimática potencial del suelo (ureasa, proteasa e hidrólisis de la fluoresceína diacetato entre septiembre 2003 y mayo 2005. Los resultados demuestran que los niveles de las variables de actividad biológica del suelo fueron significativamente diferentes entre las parcelas de bosque y plantación (Lambda de Wilk = 0,022; F 5,80 = 733; P In Chile, commercial forests plantations have increased during the last decades due in part to replacement of native forests and conversion of agricultural soils. Pinus radiata D. Don has been the main tree planted, due to its rapid growth and adaptability. In the present study we proposed that biological activity varies along the year due to changes of precipitation, temperature and soil water content and mainly because the conversion of native forest to exotic P. radiata plantations alters the soil chemistry, N and C mineralization and the potential enzymatic activity in these soils. This hypothesis was examined in a

  10. Desinfestação de Averrhoa carambola infestada por Anastrepha obliqua (Macquart, 1835 (diptera -Tephritidae através de radiação gama Desinfestation of Averrhoa carambola infested with Anastrepha obliqua (mac. 1835 (diptera - Tephritidae using gamma radiation

    Directory of Open Access Journals (Sweden)

    V. Arthur

    1994-08-01

    Full Text Available O experimento teve por objetivo determinar a dose de desinfestação para Averrhoa carambola infestada por larvas de Anastrepha obliqua. Para realização do experimento coletou-se frutos do campo e fez-se urna amostragem prévia, constatando-se que cada fruta continha em média 11 larvas de último instar do referido inseto praga. Esses frutos foram irradiados com as seguintes doses de radiação gama: 0 (test., 50, 150, 300, 600 e 900 Gy. Cada tratamento constou de 3 repetições num total de 9 frutas e aproximadamente 99 larvas por tratamento. Após a irradiação as frutas foram colocadas em câmara climatizada com 25 ± 5°C de temperatura e umidade relativa de 70 ± 5% onde aguardou-se que as larvas deixassem os frutos e se transformassem em pupas e posteriormente em adultos. Pelos resultados obtidos concluiu-se que a dose letal para (LD100 para larvas em frutos de carambola foi 600 Gy e a que impediu a emergência dos adultos foi a de 50 Gy.The aim of this experiment was to determine the desinfestation dose of gamma radiation in Averrhoa carambola infested with larvae of Anastrepha obliqua. Fruits were collected in the field, each having about 11 larvae in the last instar. Fruits were irradiated with the following gamma radiation doses: 0 (control, 50, 150, 300, 600 and 900 Gy. Each treatment consisted of 9 fruits (3 replications giving the amount of 99 larvae for each treatment. After irradiation the fruits were kept in a climatic chamber with the temperature adjusted to 25 ± 5°C and relative humidity of 70 ± 5%, until larvae left the fruit and became transformed into pupae and adults. The lethal dose (LD100 of gamma radiation for larvae in the fruits was 600 Gy and the dose of 50 Gy inhibited completely the total emergency of adults.

  11. Minimally destructive DNA extraction from archaeological artefacts made from whale baleen

    DEFF Research Database (Denmark)

    Sinding, Mikkel Holger Strander; Gilbert, Tom; Grønnow, Bjarne

    2012-01-01

    Here we demonstrate the successful extraction and amplification of target species DNA from artefacts made of whale baleen collected from excavations of past palaeo-Eskimo and Inuit cultures in Greenland. DNA was successfully extracted and amplified from a single baleen bristle of 1.5 cm length...... genetic studies. We conclude that genetic investigation of historical baleen collections can contribute to our knowledge of the prehistoric population genetics of baleen whales, for example by quantifying the impact of modern whaling on the genetic diversity of bowhead whales....

  12. Comparative Efficacy of a Soft Toothbrush with Tapered-tip Bristles and an ADA Reference Toothbrush on Established Gingivitis and Supragingival Plaque over a 12-Week Period.

    Science.gov (United States)

    Gallob, John; Petrone, Dolores M; Mateo, Luis R; Chaknis, Patricia; Morrison, Boyce M; Williams, Malcolm; Panagakos, Foti

    2016-06-01

    Evaluation of the efficacy of a soft toothbrush with tapered-tip bristles (Test Toothbrush) and an ADA reference soft toothbrush (ADA Toothbrush) on established gingivitis and supragingival plaque over a 12-week period. This randomized, single-center, examiner-blind, two-cell, parallel clinical research study assessed plaque removal by the comparison of pre- to- post-brushing after a single use, and again after six- and 12-weeks' use, using the Quigley-Hein Plaque Index, Turesky Modification. The study also assessed gingivitis after six weeks and 12 weeks using the Löe & Silness Gingival Index. Adult male and female subjects from the Central New Jersey, USA area refrained from all oral hygiene procedures for 24 hours. They reported to the study site after refraining from eating, drinking, and smoking for four hours. Subjects had the study procedure explained to them both orally and by written instructions. Subjects then gave written consent to participate before entry into the study. Following an examination for plaque (pre-brushing) and gingivitis (baseline), the subjects were randomized into two balanced groups, each group assigned to one of the two study toothbrushes. Subjects were instructed to brush their teeth for one minute under supervision with their assigned toothbrush and a commercially available fluoride toothpaste (Colgate© Cavity Protection Toothpaste), after which they were again evaluated for plaque (post-brushing). Subjects were dismissed from the study site with their assigned toothbrush and toothpaste, and instructed to brush twice daily at home for the next 12 weeks. The subjects were instructed to brush for one minute during each tooth brushing. The subjects reported to the study site after six weeks and 12 weeks of product use, at which time they were evaluated for plaque and gingivitis. Seventy-one (71) subjects complied with the protocol and completed the clinical study. Compared to the ADA Toothbrush, the Test Toothbrush provided

  13. Coelomic implantation of satellite transmitters in the bar-tailed godwit (Limosa lapponica) and the bristle-thighed curlew (Numenius tahitiensis) using propofol, bupivacaine, and lidocaine

    Science.gov (United States)

    Mulcahy, Daniel M.; Gartrell, Brett D.; Gill, Robert E.; Tibbitts, T. Lee; Ruthrauff, Daniel R.

    2011-01-01

    Intravenous propofol was used as a general anesthetic with a 2∶1 (mg∶mg) adjunctive mixture of lidocaine and bupivacaine as local anesthetics infiltrated into the surgical sites for implantation of satellite transmitters into the right abdominal air sac of 39 female and 4 male bar-tailed godwits (Limosa lapponica baueri and Limosa lapponica menzbeiri) and 11 female and 12 male bristle-thighed curlews (Numenius tahitiensis). The birds were captured on nesting grounds in Alaska, USA, and on overwintering areas in New Zealand and Australia from 2005 through 2008. As it was developed, the mass of the transmitter used changed yearly from a low of 22.4 ± 0.2 g to a high of 27.1 ± 0.2 g and weighed 25.1 ± 0.2 g in the final year. The mean load ratios ranged from 5.2% to 7.7% for godwits and from 5.7% to 7.5% for curlews and exceeded 5% for all years, locations, and genders of both species. The maximum load ratio was 8.3% for a female bar-tailed godwit implanted in Australia in 2008. Three godwits and no curlews died during surgery. Most birds were hyperthermic upon induction but improved during surgery. Two godwits (one in New Zealand and one in Australia) could not stand upon release, likely due to capture myopathy. These birds failed to respond to treatment and were euthanized. The implanted transmitters were used to follow godwits through their southern and northern migrations, and curlews were followed on their southern migration.

  14. An Eight-Week Clinical Evaluation of an Oscillating-Rotating Power Toothbrush with a Brush Head Utilizing Angled Bristles Compared with a Sonic Toothbrush in the Reduction of Gingivitis and Plaque.

    Science.gov (United States)

    Ccahuana-Vasquez, Renzo A; Conde, Erinn; Grender, Julie M; Cunningham, Pamela; Qaqish, Jimmy; Goyal, C Ram

    2015-01-01

    To evaluate and compare the efficacy of an oscillating-rotating (O-R) power toothbrush with a brush head utilizing angled bristles to a marketed sonic toothbrush in the reduction of plaque and gingivitis over an eight-week period. This study used a randomized, examiner-blind, single-center, two-treatment, parallel group, eight-week design. Subjects with mild-to-moderate plaque and gingivitis were evaluated for baseline whole mouth, gingival margin, and approximal plaque, gingivitis, and gingival bleeding. Clinical assessments were performed using the Modified Gingival Index, Gingival Bleeding Index, and the Rustogi Modified Navy Plaque Index. Subjects received either the O-R brush (Oral-B Professional Care 1000 [D16u] with Oral-B CrossAction brush head [EB50]) or the sonic brush (Sonicare DiamondClean with the standard DiamondClean brush head). Subjects brushed twice daily for two minutes per brushing with the assigned brush and a standard fluoride dentifrice for eight weeks before returning for plaque and gingivitis evaluations using the same methods. Prior to baseline and Week 8 measurements, participants abstained from oral hygiene for 12 hours. One hundred and forty-eight subjects completed the study; 75 in the O-R group and 73 in the sonic group. Both brushes demonstrated statistically significant reductions in plaque and gingivitis over the eight-week study period (p gingivitis than the sonic brush. Whole mouth, gingival margin, and approximal plaque reductions were 27.7%, 46.8%, and 29.3% greater, respectively, compared with the sonic brush, while the reductions in gingivitis, gingival bleeding, and number of bleeding sites were 34.6%, 36.4%, and 36.1% greater, respectively, for the O-R brush than for the sonic brush (p gingivitis reductions for the O-R power brush incorporating the angled-bristled brush head were significantly greater than for the sonic power brush.

  15. SHORT COMMUNICATION GOSSIPIUM HIRSUTUM L. EXTRACT ...

    African Journals Online (AJOL)

    Preferred Customer

    inhibit acid corrosion of aluminum in acid solutions, using chemical and electrochemical techniques. ... nitric acid at room temperature, scrubbed with a bristle brush under running water, dried and .... Desalination 2009, 249, 922. 9. Raja, P.B. ...

  16. Visibility and Persistence of Marker Dyes and Effect on the Quality and Mating Competitiveness of Mass-Reared Flies (Diptera: Tephritidae): Anastrepha obliqua and Bisexual and Genetic Sexing (Tapachula-7) Strains of A. ludens.

    Science.gov (United States)

    Arredondo, José; Ruiz, Lia; López, Gladis; Díaz-Fleischer, Francisco

    2017-08-01

    Fluorescent dyes are commonly used in the sterile insect technique (SIT) for marking insects for a proper identification after recapture. However, the quality of the mark must be balanced against insect performance, because dyes can negatively affect some parameters of insect performance and reduce their effectiveness in control with the SIT. We determined the visibility and persistence and the effect of dyes on the quality of Anastrepha obliqua (Macquart) and Anastrepha ludens (Loew) (bisexual and genetic sexing strains) by testing four concentrations of a dye (Day-Glo) from 0 to 2.5 g dye/kg of pupae. Visibility and persistence of the mark were positively affected by dose and negatively affected by the length of time the samples were kept in a solution of 75% alcohol. However, upon dissection, even the lowest dose of dye was visible under a fluorescence microscope. Between dyed and undyed pupae (control), no significant differences were observed in rates of emergence, fliers and flight ability, and survival in two tests, with water and without food and without water and food, at any of the concentrations tested. Furthermore, no significant difference in mating competitiveness was detected between control pupae and those dyed at 1.0 and 2.5 g dye/kg pupae. We discuss our results with the possibility of reducing the dose of dye in these three flies, because the heads are large enough to capture sufficient particles to permit identification with the current methods of detection. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. A six-week clinical evaluation of the plaque and gingivitis efficacy of an oscillating-rotating power toothbrush with a novel brush head utilizing angled CrissCross bristles versus a sonic toothbrush.

    Science.gov (United States)

    Klukowska, Malgorzata; Grender, Julie M; Conde, Erinn; Goyal, C Ram; Qaqish, J

    2014-01-01

    To compare the efficacy of an oscillating-rotating power toothbrush with a novel brush head incorporating angled CrissCross bristles (Oral-B Triumph with SmartGuide with Oral-B CrossAction brush head) versus a sonic toothbrush (Sonicare DiamondClean) for plaque and gingivitis reduction over a six-week period. This was a single-center, randomized, examiner-blind, two-treatment, parallel group study involving 65 subjects per group. Subjects presenting with mild-to-moderate gingivitis at Baseline were randomly assigned to either the oscillating-rotating brush or the sonic brush. They were instructed to use their assigned toothbrush and a standard fluoride dentifrice for two minutes twice daily at home for six weeks. Gingivitis and plaque were assessed at Baseline and Week 6 using the Modified Gingival Index (MGI), Gingival Bleeding Index (GBI), and Rustogi Modified Navy Plaque Index (RMNPI). Data were analyzed using an Analysis of Covariance (ANCOVA), with baseline as the covariate. Subjects also completed a consumer perception questionnaire to evaluate their brushing experience. One-hundred and thirty subjects were enrolled in the study and randomized to treatment. Sixty-four subjects per group completed the trial. Both brushes produced statistically significant reductions in gingivitis and plaque measures at Week 6 relative to Baseline (p gingivitis and plaque measures compared to the sonic toothbrush. The benefits for the oscillating-rotating brush over the sonic brush were 32.6% for gingivitis, 35.4% for gingival bleeding, 32% for number of bleeding sites, 22% for whole mouth plaque, 24.2% for gingival margin plaque, and 33.3% for approximal plaque (p gingival margin plaque, where p = 0.018). Analysis of the consumer perception questionnaire results showed subjects using the oscillating-rotating brush rated it higher for overall use experience and key attributes related to cleaning, gentleness, and brush head shape/size versus subjects in the sonic brush group

  18. A randomized clinical trial evaluating gingivitis and plaque reduction of an oscillating-rotating power brush with a new brush head with angled bristles versus a marketed sonic brush with self-adjusting technology.

    Science.gov (United States)

    Klukowska, Malgorzata; Grender, Julie M; Conde, Erinn; Ccahuana-Vasquez, Renzo Alberto; Ram Goyal, C

    2014-08-01

    To compare the efficacy of an oscillating-rotating power toothbrush with a novel brush head incorporating angled CrissCross bristles (Oral-B Pro 7000 SmartSeries and Oral-B CrossAction brush head) versus a marketed sonic toothbrush (Colgate ProClinical A1500 with the Triple Clean brush head) in the reduction of gingivitis and plaque over a 6-week period. This was a single center, randomized, open label, examiner-blind, 2-treatment, parallel group study. Study participants who met the entrance criteria were enrolled in the study and randomly assigned to one of the two toothbrush groups. Study participants brushed with their assigned toothbrush and a marketed fluoride dentifrice for 2 minutes twice daily at home for 6 weeks. Gingivitis and plaque were evaluated at baseline and Week 6. Gingivitis was assessed using the Modified Gingival Index (MGI) and Gingival Bleeding Index (GBI) and plaque was assessed using the Rustogi Modified Navy Plaque Index (RMNPI). Data was analyzed using the ANCOVA with baseline as the covariate. In total, 130 study participants were randomized to treatment resulting in 64 study participants per group completing the study. Both brushes produced statistically significant (P gingivitis and plaque measures relative to baseline. The oscillating-rotating,brush with the novel brush head demonstrated statistically significantly (P gingivitis measures, as well as whole mouth and interproximal plaque measures, compared to the sonic toothbrush. The benefit for the oscillating- rotating brush over the sonic brush was 21.3% for gingivitis, 35.7% for gingival bleeding, 34.7% for number of bleeding sites, 17.4% for whole mouth plaque, and 21.2% for interproximal plaque. There were no adverse events reported or observed for either brush.

  19. Extraction process

    International Nuclear Information System (INIS)

    Rendall, J.S.; Cahalan, M.J.

    1979-01-01

    A process is described for extracting at least two desired constituents from a mineral, using a liquid reagent which produces the constituents, or compounds thereof, in separable form and independently extracting those constituents, or compounds. The process is especially valuable for the extraction of phosphoric acid and metal values from acidulated phosphate rock, the slurry being contacted with selective extractants for phosphoric acid and metal (e.g. uranium) values. In an example, uranium values are oxidized to uranyl form and extracted using an ion exchange resin. (U.K.)

  20. Solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, D.M.; Latimer, E.G.

    1988-01-05

    It is an object of this invention to provide for the demetallization and general upgrading of heavy oil via a solvent extracton process, and to improve the efficiency of solvent extraction operations. The yield and demetallization of product oil form heavy high-metal content oil is maximized by solvent extractions which employ either or all of the following techniques: premixing of a minor amount of the solvent with feed and using countercurrent flow for the remaining solvent; use of certain solvent/free ratios; use of segmental baffle tray extraction column internals and the proper extraction column residence time. The solvent premix/countercurrent flow feature of the invention substantially improves extractions where temperatures and pressures above the critical point of the solvent are used. By using this technique, a greater yield of extract oil can be obtained at the same metals content or a lower metals-containing extract oil product can be obtained at the same yield. Furthermore, the premixing of part of the solvent with the feed before countercurrent extraction gives high extract oil yields and high quality demetallization. The solvent/feed ratio features of the invention substanially lower the captial and operating costs for such processes while not suffering a loss in selectivity for metals rejection. The column internals and rsidence time features of the invention further improve the extractor metals rejection at a constant yield or allow for an increase in extract oil yield at a constant extract oil metals content. 13 figs., 3 tabs.

  1. Extraction method

    International Nuclear Information System (INIS)

    Stary, J.; Kyrs, M.; Navratil, J.; Havelka, S.; Hala, J.

    1975-01-01

    Definitions of the basic terms and of relations are given and the knowledge is described of the possibilities of the extraction of elements, oxides, covalent-bound halogenides and heteropolyacids. Greatest attention is devoted to the detailed analysis of the extraction of chelates and ion associates using diverse agents. For both types of compounds detailed conditions are given of the separation and the effects of the individual factors are listed. Attention is also devoted to extractions using mixtures of organic agents, the synergic effects thereof, and to extractions in non-aqueous solvents. The effects of radiation on extraction and the main types of apparatus used for extractions carried out in the laboratory are described. (L.K.)

  2. Vacuum extraction

    DEFF Research Database (Denmark)

    Maagaard, Mathilde; Oestergaard, Jeanett; Johansen, Marianne

    2012-01-01

    Objectives. To develop and validate an Objective Structured Assessment of Technical Skills (OSATS) scale for vacuum extraction. Design. Two-part study design: Primarily, development of a procedure-specific checklist for vacuum extraction. Hereafter, validation of the developed OSATS scale for vac...

  3. Electromembrane extraction

    DEFF Research Database (Denmark)

    Huang, Chuixiu; Chen, Zhiliang; Gjelstad, Astrid

    2017-01-01

    Electromembrane extraction (EME) was inspired by solid-phase microextraction and developed from hollow fiber liquid-phase microextraction in 2006 by applying an electric field over the supported liquid membrane (SLM). EME provides rapid extraction, efficient sample clean-up and selectivity based...

  4. Bevalac extraction

    International Nuclear Information System (INIS)

    Kalnins, J.G.; Krebs, G.; Tekawa, M.; Cowles, D.; Byrne, T.

    1992-02-01

    This report will describe some of the general features of the Bevatron extraction system, primarily the dependence of the beam parameters and extraction magnet currents on the Bevalac field. The extraction magnets considered are: PFW, XPl, XP2, XS1, XS2, XM1, XM2, XM3, XQ3A and X03B. This study is based on 84 past tunes (from 1987 to the present) of various ions (p,He,O,Ne,Si,S,Ar,Ca,Ti,Fe,Nb,La,Au and U), for Bevalac fields from 1.749 to 12.575 kG, where all tunes included a complete set of beam line wire chamber pictures. The circulating beam intensity inside the Bevalac is measured with Beam Induction Electrodes (BIE) in the South Tangent Tank. The extracted beam intensity is usually measured with the Secondary Emission Monitor (SEM) in the F1-Box. For most of the tunes the extraction efficiency, as given by the SEM/BIE ratio, was not recorded in the MCR Log Book, but plotting the available Log Book data as a function of the Bevalac field, see Fig.9, we find that the extraction efficiency is typically between 30->60% with feedback spill

  5. Determination of the Rayleigh damping coefficients of steel bristles and clusters of bristles of gutter brushes

    Directory of Open Access Journals (Sweden)

    Libardo V. Vanegas-Useche

    2015-01-01

    Full Text Available El barrido de calles es un servicio importante que usualmente se realiza por medio de vehículos tipo camión que tienen un cepillo lateral conformado por grupos de cerdas de acero para barrer la basura que se encuentra en la cuneta de la carretera. Es importante que este cepillo funcione efectivamente, ya que la mayoría de la basura depositada en las carreteras se encuentra en la cuneta. Con el fin de modelar un cepillo lateral mediante análisis dinámico de elementos finitos, es necesario determinar valores apropiados de los coeficientes de amortiguación de Rayleigh tanto de cerdas individuales como de grupos de cerdas. En este trabajo se presenta la metodología y los resultados de pruebas experimentales que se han realizado para determinar estos coeficientes. Los resultados obtenidos son útiles para estudiar el desempeño de los cepillos laterales de las barredoras de calles mediante el modelado dinámico de elementos finitos.

  6. EXPANDING EXTRACTIONS

    NARCIS (Netherlands)

    Dietzenbacher, Erik; Lahr, Michael L.

    2013-01-01

    In this paper, we generalize hypothetical extraction techniques. We suggest that the effect of certain economic phenomena can be measured by removing them from an input-output (I-O) table and by rebalancing the set of I-O accounts. The difference between the two sets of accounts yields the

  7. Extracting oils

    Energy Technology Data Exchange (ETDEWEB)

    Patart, G

    1926-03-15

    In the hydrogenation or extraction of by-products from organic substances at high temperatures and pressures, the gases or liquids, or both, used are those which are already heated and compressed during industrial operations such as exothermic synthesizing reactions such as the production of methanol from hydrogen and carbon monoxide in a catalytic process. Gases from this reaction may be passed upwardly through a digester packed with pine wood while liquid from the same catalytic process is passed downwardly through the material. The issuing liquid contains methanol, pine oil, acetone, isopropyl alcohol, and acetic acid. The gases contain additional hydrogen, carbon monoxide, methane, ethylene, and its homologs which are condensed upon the catalyser to liquid hydrocarbons. Petroleum oils and coal may be treated similarly.

  8. Cordia dichotomoa Forst. f Syn. C. obliqua Willd. (English: Sebesten ...

    Indian Academy of Sciences (India)

    ropes, cordage and paper pulp. The fruit is an astringent and is used in affections o.f urinary passages, diseases o.llllngs and spleen. The decoction of bark is used infevers. The kernels are used in treating ring-worm. The leaves are used in treating ulcers and headache. The plant is used as an antidote to snake-bite.

  9. Phenotypic plasticity and reaction norms of abdominal bristle ...

    Indian Academy of Sciences (India)

    Unknown

    parents. They oviposited at 20°C on a killed yeast, high nutrient medium (David and Clavel 1965) for ... sity was not strictly controlled, and the number of adults ..... tional relationship. ... phila sibling species: an adaptive convergence of reaction.

  10. Extract of Acanthospermum hispidum

    African Journals Online (AJOL)

    Administrator

    quantitatively. Acute toxicity study of the extract was conducted, and diabetic rats induced using alloxan (80 mg/kg ... Type 2 diabetes is one of the leading causes of mortality and ..... (2011): Phytochemical screening and extraction - A review.

  11. Extracts against Various Pathogens

    Directory of Open Access Journals (Sweden)

    Ritika Chauhan

    2013-07-01

    The present study shows that tested lichen Parmotrema sp. extracts demonstrated a strong antimicrobial effect. That suggests the active components from methanol extracts of the investigated lichen Parmotrema sp. can be used as natural antimicrobial agent against pathogens.

  12. using Supercritical Fluid Extraction

    African Journals Online (AJOL)

    Methods: Supercritical CO2 extraction technology was adopted in this experiment to study the process of extraction of volatile oil from Polygonatum odoratum while gas chromatograph-mass spectrometer ..... Saponin rich fractions from.

  13. Information extraction system

    Science.gov (United States)

    Lemmond, Tracy D; Hanley, William G; Guensche, Joseph Wendell; Perry, Nathan C; Nitao, John J; Kidwell, Paul Brandon; Boakye, Kofi Agyeman; Glaser, Ron E; Prenger, Ryan James

    2014-05-13

    An information extraction system and methods of operating the system are provided. In particular, an information extraction system for performing meta-extraction of named entities of people, organizations, and locations as well as relationships and events from text documents are described herein.

  14. Extraction with supercritical gases

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, G M; Wilke, G; Stahl, E

    1980-01-01

    The contents of this book derives from a symposium on the 5th and 6th of June 1978 in the ''Haus der Technik'' in Essen. Contributions were made to separation with supercritical gases, fluid extraction of hops, spices and tobacco, physicochemical principles of extraction, phase equilibria and critical curves of binary ammonia-hydrocarbon mixtures, a quick method for the microanalytical evaluation of the dissolving power of supercritical gases, chromatography with supercritical fluids, the separation of nonvolatile substances by means of compressed gases in countercurrent processes, large-scale industrial plant for extraction with supercritical gases, development and design of plant for high-pressure extraction of natural products.

  15. Exhaustive extraction of peptides by electromembrane extraction

    DEFF Research Database (Denmark)

    Huang, Chuixiu; Gjelstad, Astrid; Pedersen-Bjergaard, Stig

    2015-01-01

    trifluoroacetate, and leu-enkephalin were extracted from 600 μL of 25 mM phosphate buffer (pH 3.5), through a supported liquid membrane (SLM) containing di-(2-ethylhexyl)-phosphate (DEHP) dissolved in an organic solvent, and into 600 μL of an acidified aqueous acceptor solution using a thin flat membrane-based EME...

  16. Plant extraction process

    DEFF Research Database (Denmark)

    2006-01-01

    A method for producing a plant extract comprises incubating a plant material with an enzyme composition comprising a lipolytic enzyme.......A method for producing a plant extract comprises incubating a plant material with an enzyme composition comprising a lipolytic enzyme....

  17. AGS slow extraction improvements

    International Nuclear Information System (INIS)

    Glenn, J.W.; Smith, G.A.; Sandberg, J.N.; Repeta, L.; Weisberg, H.

    1979-01-01

    Improvement of the straightness of the F5 copper septum increased the AGS slow extraction efficiency from approx. 80% to approx. 90%. Installation of an electrostatic septum at H2O, 24 betatron wavelengths upstream of F5, further improved the extraction efficiency to approx. 97%

  18. Extraction of metal values

    Energy Technology Data Exchange (ETDEWEB)

    Dalton, R F

    1988-10-19

    Metal values (especially uranium values) are extracted from aqueous solutions of metal oxyions in the absence of halogen ion using an imidazole of defined formula. Especially preferred extractants are 1-alkyl imidazoles and benzimidazoles having from 7 to 25 carbon atoms in the alkyl group.

  19. (Lamiaceae) root extracts

    African Journals Online (AJOL)

    Purpose: To evaluate the larvicidal, nematicidal, antifeedant, and antifungal effects of 10 solvent extracts of Mentha spicata root. Methods: Ten solvent extracts were investigated for their total flavonoid and phenolic content and screened for larvicidal, nematicidal, antifeedant, and antifungal activities. The total phenolic ...

  20. Extraction chromatography of actinides

    International Nuclear Information System (INIS)

    Muller, W.

    1978-01-01

    Extraction chromatography of actinides in the oxidation state from 2 to 6 is reviewed. Data on using neutral (tbp), basic (substituted ammonium salts) and acidic [di-(2-ethylhexyl)-phosphoric acid (D2EHPA)] extracting agents ketones, esters, alcohols and β-diketones in this method are given. Using the example of actinide separation using D2EHPA, discussed are factors influencing the efficiency of their chromatography separation (nature and particle size of the carrier materials, extracting agents amount on the carrier, temperature and elution rate)

  1. Multimedia Information Extraction

    CERN Document Server

    Maybury, Mark T

    2012-01-01

    The advent of increasingly large consumer collections of audio (e.g., iTunes), imagery (e.g., Flickr), and video (e.g., YouTube) is driving a need not only for multimedia retrieval but also information extraction from and across media. Furthermore, industrial and government collections fuel requirements for stock media access, media preservation, broadcast news retrieval, identity management, and video surveillance.  While significant advances have been made in language processing for information extraction from unstructured multilingual text and extraction of objects from imagery and vid

  2. The organophosphorus extractants

    International Nuclear Information System (INIS)

    Zaoul, B.; Attou, M.; Azzouz, A.

    1989-07-01

    This work consists in a bibliographic review dealing with phosphorus and organophosphorus compounds chemistry and especially with the main extracting agents used in uranium ore treatment. In this context, a special interest is devoted to TBP, D 2 EHPA and TOPO. The content of this work is based on a large bibliography including cca. One hundred references related to many aspects concerning as well the nomenclature, the classification and the chemical structures of the organophosphorus compounds as synthesis methods, purification and analysis of the main extracting agents used in uranium extraction

  3. Substoichiometric extraction of phosphorus

    International Nuclear Information System (INIS)

    Shigematsu, T.; Kudo, K.

    1981-01-01

    A study of the substoichiometric extraction of phosphorus is described. Phosphorus was extracted in the form of ternary compounds such as ammonium phosphomolybdate, 8-hydroxyquinolinium phosphomolybdate, tetraphenylarsonium phosphomolybdate and tri-n-octylamine phosphomolybdate. Consequently, phosphorus was extracted substoichiometrically by the addition of a substoichiometric amount of molybdenum for the four phosphomolybdate compounds. On the other hand, phosphorus could be separated substoichiometrically with a substoichiometric amount of tetraphenylarsonium chloride or tri-n-octylamine. Stoichiometric ratios of these ternary compounds obtained substoichiometrically were 1:12:3 for phosphorus, molybdenum and organic reagent. The applicability of these compounds to phosphorus determination is also discussed. (author)

  4. Hydroalcohol Fruit Peel Extract

    African Journals Online (AJOL)

    L) fruit peel using 80 % ethanol-induced gastric ulcer model in rats. Methods: Male ... Conclusion: The study shows indicates the antiulcer properties of the methanol extracts of north white ... experimentation, Cimetidine was obtained from.

  5. CARICA PAPAYA EXTRACTS

    African Journals Online (AJOL)

    DR. AMINU

    2Department of Science Laboratory Technology, Hussaini Adamu Federal Polytechnic, Kazaure ... Powdered leaves of Carica papaya (L.) were extracted with ethanol and partitioned in .... about 15 minutes indicated the presence of saponins.

  6. Comparison of mentha extracts obtained by different extraction methods

    Directory of Open Access Journals (Sweden)

    Milić Slavica

    2006-01-01

    Full Text Available The different methods of mentha extraction, such as steam distillation, extraction by methylene chloride (Soxhlet extraction and supercritical fluid extraction (SFE by carbon dioxide (CO J were investigated. SFE by CO, was performed at pressure of 100 bar and temperature of40°C. The extraction yield, as well as qualitative and quantitative composition of obtained extracts, determined by GC-MS method, were compared.

  7. Gold mineralogy and extraction

    Energy Technology Data Exchange (ETDEWEB)

    Cashion, J.D.; Brown, L.J. [Monash University, Physics Department (Australia)

    1998-12-15

    Several examples are examined in which Moessbauer spectroscopic analysis of gold mineral samples, treated concentrates and extracted species has provided information not obtainable by competing techniques. Descriptions are given of current work on bacterial oxidation of pyritic ores and on the adsorbed species from gold extracted from cyanide and chloride solutions onto activated carbon and polyurethane foams. The potential benefits for the gold mining industry from Moessbauer studies and some limitations on the use of the technique are also discussed.

  8. Gold mineralogy and extraction

    International Nuclear Information System (INIS)

    Cashion, J.D.; Brown, L.J.

    1998-01-01

    Several examples are examined in which Moessbauer spectroscopic analysis of gold mineral samples, treated concentrates and extracted species has provided information not obtainable by competing techniques. Descriptions are given of current work on bacterial oxidation of pyritic ores and on the adsorbed species from gold extracted from cyanide and chloride solutions onto activated carbon and polyurethane foams. The potential benefits for the gold mining industry from Moessbauer studies and some limitations on the use of the technique are also discussed

  9. Beam Extraction and Transport

    CERN Document Server

    Kalvas, T.

    2013-12-16

    This chapter gives an introduction to low-energy beam transport systems, and discusses the typically used magnetostatic elements (solenoid, dipoles and quadrupoles) and electrostatic elements (einzel lens, dipoles and quadrupoles). The ion beam emittance, beam space-charge effects and the physics of ion source extraction are introduced. Typical computer codes for analysing and designing ion optical systems are mentioned, and the trajectory tracking method most often used for extraction simulations is described in more detail.

  10. Tevatron extraction microcomputer

    International Nuclear Information System (INIS)

    Chapman, L.; Finley, D.A.; Harrison, M.; Merz, W.; Batavia, IL)

    1985-01-01

    Extraction in the Fermilab Tevatron is controlled by a multi-processor Multibus microcomputer system called QXR (Quad eXtraction Regulator). QXR monitors several analog beam signals and controls three sets of power supplies: the ''bucker'' and ''pulse'' magnets at a rate of 5760 Hz, and the ''QXR'' magnets at 720 Hz. QXR supports multiple slow spills (up to a total of 35 seconds) with multiple fast pulses intermixed. It linearizes the slow spill and bucks out the high frequency components. Fast extraction is done by outputting a variable pulse waveform. Closed loop learning techniques are used to improve performance from cycle to cycle for both slow and fast extraction. The system is connected to the Tevatron clock system so that it can track the machine cycle. QXR is also connected to the rest of the Fermilab control system, ACNET. Through ACNET, human operators and central computers can monitor and control extraction through communications with QXR. The controls hardware and software both employ some standard and some specialized components. This paper gives an overview of QXR as a control system; another paper (1) summarizes performance

  11. Tevatron extraction microcomputer

    International Nuclear Information System (INIS)

    Chapman, L.; Finley, D.A.; Harrison, M.; Merz, W.

    1985-06-01

    Extraction in the Fermilab Tevatron is controlled by a multi-processor Multibus microcomputer system called QXR (Quad eXtraction Regulator). QXR monitors several analog beam signals and controls three sets of power supplies: the ''bucker'' and ''pulse'' magnets at a rate of 5760 Hz, and the ''QXR'' magnets at 720 Hz. QXR supports multiple slow spills (up to a total of 35 seconds) with multiple fast pulses intermixed. It linearizes the slow spill and bucks out the high frequency components. Fast extraction is done by outputting a variable pulse waveform. Closed loop learning techniques are used to improve performance from cycle to cycle for both slow and fast extraction. The system is connected to the Tevatron clock system so that it can track the machine cycle. QXR is also connected to the rest of the Fermilab control system, ACNET. Through ACNET, human operators and central computers can monitor and control extraction through communications with QXR. The controls hardware and software both employ some standard and some specialized components. This paper gives an overview of QXR as a control system; another paper summarizes performance

  12. Isoflavones hydrolisis and extraction

    Directory of Open Access Journals (Sweden)

    Jozilene Fernandes Farias dos Santos

    2012-12-01

    Full Text Available Isoflavones are found in leguminous species and are used as phytoestrogens widely used by industry for its beneficial effects as estrogens mimicked, antioxidant action and anti-cancer activity. The identification and quantification of isoflavones in plants is a need due to the high demand of industry. Several methods are used for its extraction, using organic solvents (methanol, ethanol and acetonitrile. Samples from five legumes species from Instituto de Zootecnia (IZ, Forage Gene Bank were tested. All seeds received a hydrothermic treatment immersed in pure water at 50°C for 12 hours. Seeds were then oven-dryed. In this work we tested the extraction using only the hydrothermic treatment and hyfrothermic treatment allied to methanol extaction protocol. Seeds were grinded and half of the samples were ressuspended in PBS (phosphate Buffer and the other half were submited to 4 mL of methanol and 1% of acetic acid, soaked for 5 hours, shaked every 15 minutes, at room temperature. The five legume species that we quantify isoflavones by enzyme immunoassay (EIA were: Calopogonium mucunoides, Bauhinia sp., Cajanus cajan, Galactia martii, Leucaena leucocephala. The extraction procedure is a recomendation of AOAC (Association of Official Analytical Chemists for isoflavone quantification. Ours results show an increase of extraction using methanol 80% plus acetic acid 1% and was obtained using solvent extraction in comparison to hydrothermic procedure alone (figure 1.

  13. Ultrasound-Assisted Extraction: Effect of Extraction Time and Solvent ...

    African Journals Online (AJOL)

    Purpose: To investigate the influence of extraction conditions assisted by ultrasound on the quality of extracts obtained from Mesembryanthemum edule shoots. Methods: The extraction procedure was carried out in an ultrasonic bath. The effect of two solvents (methanol and ethanol) and two extraction times (5 and 10 min) ...

  14. Substoichiometric extraction of chromium

    International Nuclear Information System (INIS)

    Shigematsu, T.; Kudo, K.

    1980-01-01

    Substoichiometric extraction of chromium with tetraphenylarsonium chloride (TPACl), tri-n-octylamine (TNOA), diethylammonium diethyldithiocarbamate (DDDC) and ammonium pyrrolidinedithiocarbamate (APDC) was examined in detail. Chromium can be extracted substoichiometrically in a pH range, which is 1.1-2.6 for the TPACl compound, 0.6-2.3 for the TNOA compound, 5.1-6.4 for the DDDC chelate and 3.9-4.9 for the APDC chelate. Chromium in high-purity calcium carbonate, Orchard Leaves (NBS SRM-1571) and Brewers Yeast (NBS SRM-1569) was determined by neutron activation analysis combined with substoichiometric extraction by DDDC and APDC. The values of 2.0+-0.02 ppm and 2.6+-0.2 ppm were obtained for Brewers Yeast and Orchard Leaves, respectively. These values were in good agreement with those reported by NBS. The reaction mechanism and the reaction ratio between hexavalent chromium and dithiocarbamate are also discussed. (author)

  15. Genotoxicity of plant extracts

    Directory of Open Access Journals (Sweden)

    Vera M. F. Vargas

    1991-01-01

    Full Text Available Aqueous extracts of seven species used in Brazilian popular medicine (Achyrocline satureoides, Iodina rhombifolia, Desmodium incanum, Baccharis anomala, Tibouchina asperior, Luehea divaricata, Maytenus ilicifolia were screened to the presence of mutagenic activity in the Ames test (Salmonella/microsome. Positive results were obtained for A. satureoides, B anomala and L. divaricata with microsomal activation. As shown elsewhere (Vargas et al., 1990 the metabolites of A. satureoides extract also show the capacity to induce prophage and/or SOS response in microscreen phage induction assay and SOS spot chromotest.

  16. Nano-electromembrane extraction

    DEFF Research Database (Denmark)

    Payán, María D Ramos; Li, Bin; Petersen, Nickolaj J.

    2013-01-01

    as extraction selectivity. Compared with conventional EME, the acceptor phase volume in nano-EME was down-scaled by a factor of more than 1000. This resulted in a very high enrichment capacity. With loperamide as an example, an enrichment factor exceeding 500 was obtained in only 5 min of extraction...... electrophoresis (CE). In that way the sample preparation performed by nano-EME was coupled directly with a CE separation. Separation performance of 42,000-193,000 theoretical plates could easily be obtained by this direct sample preparation and injection technique that both provided enrichment as well...

  17. Uranium extraction at Rossing

    International Nuclear Information System (INIS)

    Kesler, S.B.; Fahrbach, D.O.E.

    1982-01-01

    Rossing Uranium Ltd. operates a large open pit uranium mine and extraction plant at a remote site in the Namib desert. Production started at the plant in 1978. A ferric leach process was introduced later, and the new leach plant began commissioning in October 1981. The process has proved to be reliable and easily controlled. Ferric iron is supplied through recovery from the acid plant calcine, and levels can be maintained above the design levels. Leach extractions were increased more than expected when this process was adopted, and the throughput has been considerably reduced, allowing cost savings in mining and milling

  18. Extraction spectrophotometric analyzer

    International Nuclear Information System (INIS)

    Batik, J.; Vitha, F.

    1985-01-01

    Automation is discussed of extraction spectrophotometric determination of uranium in a solution. Uranium is extracted from accompanying elements in an HCl medium with a solution of tributyl phosphate in benzene. The determination is performed by measuring absorbance at 655 nm in a single-phase ethanol-water-benzene-tributyl phosphate medium. The design is described of an analyzer consisting of an analytical unit and a control unit. The analyzer performance promises increased productivity of labour, improved operating and hygiene conditions, and mainly more accurate results of analyses. (J.C.)

  19. Extraction Methods, Variability Encountered in

    NARCIS (Netherlands)

    Bodelier, P.L.E.; Nelson, K.E.

    2014-01-01

    Synonyms Bias in DNA extractions methods; Variation in DNA extraction methods Definition The variability in extraction methods is defined as differences in quality and quantity of DNA observed using various extraction protocols, leading to differences in outcome of microbial community composition

  20. Grape Seed Extract

    Science.gov (United States)

    ... Greece people have used grapes, grape leaves, and sap for health purposes. Grape seed extract was developed ... sharing research results, and educating the public. Its resources include publications (such as Dietary ... Department of Health & Human Services, National Institutes of Health, National Center for ...

  1. SPS slow extraction septa

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    SPS long straight section (LSS) with a series of 5 septum tanks for slow extraction (view in the direction of the proton beam). There are 2 of these: in LSS2, towards the N-Area; in LSS6 towards the W-Area. See also Annual Report 1975, p.175.

  2. SPS extraction systems

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    One of the 3-m long electrostatics septa. The septum itself consists of 0.15 mm thick molybdenum wires with a 1.5 mm pitch. Each of the two SPS extraction systems will contain four of these electrostatic septa.

  3. LEAR: antiproton extraction lines

    CERN Multimedia

    Photographic Service

    1992-01-01

    Antiprotons, decelerated in LEAR to a momentum of 100 MeV/c (kinetic energy of 5.3 MeV), were delivered to the experiments in an "Ultra-Slow Extraction", dispensing some 1E9 antiprotons over times counted in hours. Beam-splitters and a multitude of beam-lines allowed several users to be supplied simultaneously.

  4. Concepts for immobilized extractants

    International Nuclear Information System (INIS)

    Paine, R.T.

    1993-01-01

    This paper addresses the problem of cleaning actinides from geomedia. In the past actinides were often released to the ground because of their tendency to bind tightly to forms of geomedia, and in addition spills have occurred over time. To remediate these areas involves finding ways to either guarantee the retention of the actinides in the geomedia, or finding ways to extract them and leave the soils clean. One possible way to clean soils is to wash them, which in order to extract actinides means the use of ligands which bind competitively with actinides in the presence of soil fractions. An array of organic ligands is known which bind with actinides, but the larger problem of handling these ligands in a manner which allows concentration of the actinides is still open. The author addresses work to bind such ligands to different types of matrices which can then be used in packed extraction columns to remove actindes from flow streams, and finally concentrated, by using minimal volume backflushing to extract the actinides from the column

  5. Uranium extraction from phosphoric acid

    International Nuclear Information System (INIS)

    Araujo Figueiredo, C. de

    1984-01-01

    The recovery of uranium from phosphoric liquor by two extraction process is studied. First, uranium is reduced to tetravalent condition and is extracted by dioctypyrophosphoric acid. The re-extraction is made by concentrated phosphoric acid with an oxidizing agent. The re-extract is submitted to the second process and uranium is extracted by di-ethylhexilphosphoric acid and trioctylphosphine oxide. (M.A.C.) [pt

  6. Automated Water Extraction Index

    DEFF Research Database (Denmark)

    Feyisa, Gudina Legese; Meilby, Henrik; Fensholt, Rasmus

    2014-01-01

    Classifying surface cover types and analyzing changes are among the most common applications of remote sensing. One of the most basic classification tasks is to distinguish water bodies from dry land surfaces. Landsat imagery is among the most widely used sources of data in remote sensing of water...... resources; and although several techniques of surface water extraction using Landsat data are described in the literature, their application is constrained by low accuracy in various situations. Besides, with the use of techniques such as single band thresholding and two-band indices, identifying...... an appropriate threshold yielding the highest possible accuracy is a challenging and time consuming task, as threshold values vary with location and time of image acquisition. The purpose of this study was therefore to devise an index that consistently improves water extraction accuracy in the presence...

  7. Extractable Work from Correlations

    Directory of Open Access Journals (Sweden)

    Martí Perarnau-Llobet

    2015-10-01

    Full Text Available Work and quantum correlations are two fundamental resources in thermodynamics and quantum information theory. In this work, we study how to use correlations among quantum systems to optimally store work. We analyze this question for isolated quantum ensembles, where the work can be naturally divided into two contributions: a local contribution from each system and a global contribution originating from correlations among systems. We focus on the latter and consider quantum systems that are locally thermal, thus from which any extractable work can only come from correlations. We compute the maximum extractable work for general entangled states, separable states, and states with fixed entropy. Our results show that while entanglement gives an advantage for small quantum ensembles, this gain vanishes for a large number of systems.

  8. Apparatus for extracting petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Coogan, J

    1921-01-18

    An apparatus for extracting petroleum from petroleum bearing sand or shale is described comprising a container for liquids, the container being divided into a plurality of compartments, an agitator mounted within the container and below the liquid level and having its forward end opening into one of the compartments, means for delivering sand or shale to the forward end of the agitator, means for subjecting the sand or shale to the action of a solvent for the petroleum while the sand or shale is being agitated and is submerged, the first-mentioned compartment being adapted to receive the extracted petroleum and means for removing the treated sand or shale from adjacent the rear end of the agitator.

  9. Solid phase extraction membrane

    Science.gov (United States)

    Carlson, Kurt C [Nashville, TN; Langer, Roger L [Hudson, WI

    2002-11-05

    A wet-laid, porous solid phase extraction sheet material that contains both active particles and binder and that possesses excellent wet strength is described. The binder is present in a relatively small amount while the particles are present in a relatively large amount. The sheet material is sufficiently strong and flexible so as to be pleatable so that, for example, it can be used in a cartridge device.

  10. Gold and uranium extraction

    International Nuclear Information System (INIS)

    James, G.S.; Davidson, R.J.

    1977-01-01

    A process for extracting gold and uranium from an ore containing them both comprising the steps of pulping the finely comminuted ore with a suitable cyanide solution at an alkaline pH, acidifying the pulp for uranium dissolution, adding carbon activated for gold recovery to the pulp at a suitable stage, separating the loaded activated carbon from the pulp, and recovering gold from the activated carbon and uranium from solution

  11. Extractive metallurgy. Recent advances

    International Nuclear Information System (INIS)

    Stevenson, E.J.

    1977-01-01

    Detailed technical information derived from patents issued since 1975 on extractive metallurgy is presented. In part one, concerning copper, the major areas covered are: smelting and roasting; acid leaching; ammonia leach processes; cuprous chloride and ferric chloride; and recovery of copper values from solution. Part two covers other metals, including: nickel and cobalt; ocean floor nodules; lead, zinc, molybdenum and manganese; precious metals; and uranium titanium, tantalum, rhenium, gallium, and other metals

  12. Solvent extraction columns

    International Nuclear Information System (INIS)

    Middleton, P.; Smith, J.R.

    1979-01-01

    In pulsed columns for use in solvent extraction processes, e.g. the reprocessing of nuclear fuel, the horizontal perforated plates inside the column are separated by interplate spacers manufactured from metallic neutron absorbing material. The spacer may be in the form of a spiral or concentric circles separated by radial limbs, or may be of egg-box construction. Suitable neutron absorbing materials include stainless steel containing boron or gadolinium, hafnium metal or alloys of hafnium. (UK)

  13. Influence of Extraction Parameters on Hydroalcohol Extracts of the ...

    African Journals Online (AJOL)

    The parameter that had the greatest influence on extraction process was alcohol concentration ... rules and processing steps [2]. As part .... Table 1: Extractive batch nnumbers with the respective factors and levels studied in the factorial design.

  14. Plant extracts as radioprotectors

    Energy Technology Data Exchange (ETDEWEB)

    Baydoun, S; Al-Oudat, M [Atomic Energy Commission, Department of Radiation Protection and Nuclear Safety, Damascus (Syrian Arab Republic); Al-Achkar, W [Atomic Energy Commission, Department of Radiobiology and Health, Damascus (Syrian Arab Republic)

    1996-09-01

    Several studies show that the extracts of some plants, namely containing vitamins or sulfide components, have radioprotection properties against the effects of ionizing radiation. In Syria, many of hates plants are available. This experiment was conducted in order to test the ability of ten different plants to protect against the radiation damages. These plants are Daucus carota L., Brassica oleracea L, Aloe vera L., Opuntia ficus-indica, Allium cepa L., Capsicum annuum L., Scilla maritima L., Allium sativum L., Rubus sanctus L. and Rosa canina L.Their effects on the protection of E. Coli growth after the exposure to L.D 50 of gamma radiation (100 Gy) were investigated . Two concentrations to each plant extract were tested, both were than 1%. Our results are indicating that the protection depend on plant. The radioprotection factors were ranged between 1.42 to 2.39. The best results were obtained by using the extract of Allium sativum L. (2.01), Opuntia ficus-indica (2.14) and Capsiucum annuum L. (2.39). (author) 16 refs., 2 tabs., 4 figs.

  15. Plant extracts as radioprotectors

    International Nuclear Information System (INIS)

    Baydoun, S.; Al-Oudat, M.; Al-Achkar, W.

    1996-09-01

    Several studies show that the extracts of some plants, namely containing vitamins or sulfide components, have radioprotection properties against the effects of ionizing radiation. In Syria, many of hates plants are available. This experiment was conducted in order to test the ability of ten different plants to protect against the radiation damages. These plants are Daucus carota L., Brassica oleracea L, Aloe vera L., Opuntia ficus-indica, Allium cepa L., Capsicum annuum L., Scilla maritima L., Allium sativum L., Rubus sanctus L. and Rosa canina L.Their effects on the protection of E. Coli growth after the exposure to L.D 50 of gamma radiation (100 Gy) were investigated . Two concentrations to each plant extract were tested, both were than 1%. Our results are indicating that the protection depend on plant. The radioprotection factors were ranged between 1.42 to 2.39. The best results were obtained by using the extract of Allium sativum L. (2.01), Opuntia ficus-indica (2.14) and Capsiucum annuum L. (2.39). (author) 16 refs., 2 tabs., 4 figs

  16. Plant extracts as radioprotectors

    International Nuclear Information System (INIS)

    Baydoun, S.; Al-Oudat, M.; Al-Achkar, W.

    1997-01-01

    Several studies show that the extracts of some plants, namely containing vitamins or sulfide components, have radioprotection properties against the effects of ionizing radiation. In Syria, many of hates plants are available. This experiment was conducted in order to test the ability of ten different plants to protect against the radiation damages. These plants are Daucus carota L., Brassica oleracea L, Aloe vera L., Opuntia ficus-indica, Allium cepa L., Capsicum annuum L., Scilla maritima L., Allium sativum L., Rubus sanctus L. and Rosa canina L.Their effects on the protection of E. Coli growth after the exposure to L.D 50 of gamma radiation (100 Gy) were investigated . Two concentrations to each plant extract were tested, both were than 1%. Our results are indicating that the protection depend on plant. The radioprotection factors were ranged between 1.42 to 2.39. The best results were obtained by using the extract of Allium sativum L. (2.01), Opuntia ficus-indica (2.14) and Capsiucum annuum L. (2.39). (author)

  17. Solvent extraction of zirconium

    International Nuclear Information System (INIS)

    Kim, S.S.; Yoon, J.H.

    1981-01-01

    The extraction of zirconium(VI) from an aqueous solution of constant ionic strength with versatic acid-10 dissolved in benzen was studied as a function of pH and the concentration of zirconium(VI) and organic acid. The effects of sulphate and chlorine ions on the extraction of the zirconium(VI) were briefly examined. It was revealed that (ZrOR 2 .2RH) is the predominant species of extracted zirconium(VI) in the versatic acid-10. The chemical equation and the apparent equilibrium constants thereof have been determined as follows. (ZrOsup(2+))aq+ 2(R 2 H 2 )sub(org) = (ZrOR 2 .2RH)sub(org)+2(H + )aq Ksub(Zr) = (ZrOR 2 .2RH)sub(org)(H + ) 2 /(ZrOsup(2+))sub(aq)(R 2 H 2 )sup(2)sub(org) = 3.3 x 10 -7 . The synergistic effects of TBP and D2EHPA were also studied. In the mixed solvent with 0.1M TBP, the synergistic effect was observed, while the mixed solvent with D2EHPA showed the antisynergistic effect. (Author)

  18. EXTRACTION OF MONOAZO DYES BY HYDROPHILIC EXTRACTANTS FROM AQUEOUS SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Y. I. Korenman

    2012-01-01

    Full Text Available The extraction of mono azo dyes E102, E122, E110, E124, E129 from aqueous solutions with hydrophilic solvents (alcohols, esters, ketones and polymers (poly-N-vinylamides, polyethylene glycol was studied. The main regularities of extraction are established. The distribution coefficients and degree of extraction of dyes was estimate. The influence of the nature of solvents and polymers on the extraction of dyes from aqueous solutions are established.

  19. Understanding extractive bleed : wood extractives: distribution, properties, and classes

    Science.gov (United States)

    Edward Burke; Norm Slavik; Tony Bonura; Dennis Connelly; Tom Faris; Arnie Nebelsick; Brent Stuart; Sam Williams; Alex C. Wiedenhoeft

    2010-01-01

    Color, odor, and natural durability of heartwood are characteristics imparted by a class of chemicals in wood known collectively extractives. Wood is converted by the tree from sapwood to heartwood by the deposition of extractives, typically many years after the growth ring undergoing this change was formed by the tree. Extractives are thus not a part of the wood...

  20. ACTIVITIES OF ACACIA NILOTICA EXTRACTS

    African Journals Online (AJOL)

    DR. AMINU

    sensitivity tests of crude extract fractions of the plant extracts using ethanol, chloroform, methanol, petroleum ether, water and ethyl acetate were investigated on nine bacterial isolates. .... These were obtained by punching the filter paper with.

  1. Dynamics of Agricultural Groundwater Extraction

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.; Zilberman, D.; Ierland, van E.C.

    2001-01-01

    Agricultural shallow groundwater extraction can result in desiccation of neighbouring nature reserves and degradation of groundwater quality in the Netherlands, whereas both externalities are often not considered when agricultural groundwater extraction patterns are being determined. A model is

  2. Improvements in solvent extraction columns

    International Nuclear Information System (INIS)

    Aughwane, K.R.

    1987-01-01

    Solvent extraction columns are used in the reprocessing of irradiated nuclear fuel. For an effective reprocessing operation a solvent extraction column is required which is capable of distributing the feed over most of the column. The patent describes improvements in solvent extractions columns which allows the feed to be distributed over an increased length of column than was previously possible. (U.K.)

  3. AGRICULTURAL USES OF SEAWEEDS EXTRACTS

    Directory of Open Access Journals (Sweden)

    Monica Popescu

    2013-12-01

    Full Text Available Marine bioactive substances extracted from seaweed are currently used in food, animal feed, as a raw material in the industry and have therapeutic applications. Most of the products based on marine algae are extracted from Brown algae Ascophyllum nodosum. The use of extracts of seaweed in agriculture is beneficial because the amount of chemical fertilizers and obtaining organic yield.

  4. On extraction reagents for hydrometallurgy

    International Nuclear Information System (INIS)

    Zolotov, Yu.A.

    1975-01-01

    Fundamental requirements to the extractants are considered. Ways of obtaining selective extractants are discussed in particular on the basis of coordination chemistry achivements. Attention is drawn to expediency of study (as extractants) of flotation reagents, additions to the oil, pesticides, accelerators of caoutchouc vulcanization

  5. Challenges in Managing Information Extraction

    Science.gov (United States)

    Shen, Warren H.

    2009-01-01

    This dissertation studies information extraction (IE), the problem of extracting structured information from unstructured data. Example IE tasks include extracting person names from news articles, product information from e-commerce Web pages, street addresses from emails, and names of emerging music bands from blogs. IE is all increasingly…

  6. Extracting Tag Hierarchies

    Science.gov (United States)

    Tibély, Gergely; Pollner, Péter; Vicsek, Tamás; Palla, Gergely

    2013-01-01

    Tagging items with descriptive annotations or keywords is a very natural way to compress and highlight information about the properties of the given entity. Over the years several methods have been proposed for extracting a hierarchy between the tags for systems with a "flat", egalitarian organization of the tags, which is very common when the tags correspond to free words given by numerous independent people. Here we present a complete framework for automated tag hierarchy extraction based on tag occurrence statistics. Along with proposing new algorithms, we are also introducing different quality measures enabling the detailed comparison of competing approaches from different aspects. Furthermore, we set up a synthetic, computer generated benchmark providing a versatile tool for testing, with a couple of tunable parameters capable of generating a wide range of test beds. Beside the computer generated input we also use real data in our studies, including a biological example with a pre-defined hierarchy between the tags. The encouraging similarity between the pre-defined and reconstructed hierarchy, as well as the seemingly meaningful hierarchies obtained for other real systems indicate that tag hierarchy extraction is a very promising direction for further research with a great potential for practical applications. Tags have become very prevalent nowadays in various online platforms ranging from blogs through scientific publications to protein databases. Furthermore, tagging systems dedicated for voluntary tagging of photos, films, books, etc. with free words are also becoming popular. The emerging large collections of tags associated with different objects are often referred to as folksonomies, highlighting their collaborative origin and the “flat” organization of the tags opposed to traditional hierarchical categorization. Adding a tag hierarchy corresponding to a given folksonomy can very effectively help narrowing or broadening the scope of search

  7. Extracting tag hierarchies.

    Directory of Open Access Journals (Sweden)

    Gergely Tibély

    Full Text Available Tagging items with descriptive annotations or keywords is a very natural way to compress and highlight information about the properties of the given entity. Over the years several methods have been proposed for extracting a hierarchy between the tags for systems with a "flat", egalitarian organization of the tags, which is very common when the tags correspond to free words given by numerous independent people. Here we present a complete framework for automated tag hierarchy extraction based on tag occurrence statistics. Along with proposing new algorithms, we are also introducing different quality measures enabling the detailed comparison of competing approaches from different aspects. Furthermore, we set up a synthetic, computer generated benchmark providing a versatile tool for testing, with a couple of tunable parameters capable of generating a wide range of test beds. Beside the computer generated input we also use real data in our studies, including a biological example with a pre-defined hierarchy between the tags. The encouraging similarity between the pre-defined and reconstructed hierarchy, as well as the seemingly meaningful hierarchies obtained for other real systems indicate that tag hierarchy extraction is a very promising direction for further research with a great potential for practical applications. Tags have become very prevalent nowadays in various online platforms ranging from blogs through scientific publications to protein databases. Furthermore, tagging systems dedicated for voluntary tagging of photos, films, books, etc. with free words are also becoming popular. The emerging large collections of tags associated with different objects are often referred to as folksonomies, highlighting their collaborative origin and the "flat" organization of the tags opposed to traditional hierarchical categorization. Adding a tag hierarchy corresponding to a given folksonomy can very effectively help narrowing or broadening the scope of

  8. Extracting tag hierarchies.

    Science.gov (United States)

    Tibély, Gergely; Pollner, Péter; Vicsek, Tamás; Palla, Gergely

    2013-01-01

    Tagging items with descriptive annotations or keywords is a very natural way to compress and highlight information about the properties of the given entity. Over the years several methods have been proposed for extracting a hierarchy between the tags for systems with a "flat", egalitarian organization of the tags, which is very common when the tags correspond to free words given by numerous independent people. Here we present a complete framework for automated tag hierarchy extraction based on tag occurrence statistics. Along with proposing new algorithms, we are also introducing different quality measures enabling the detailed comparison of competing approaches from different aspects. Furthermore, we set up a synthetic, computer generated benchmark providing a versatile tool for testing, with a couple of tunable parameters capable of generating a wide range of test beds. Beside the computer generated input we also use real data in our studies, including a biological example with a pre-defined hierarchy between the tags. The encouraging similarity between the pre-defined and reconstructed hierarchy, as well as the seemingly meaningful hierarchies obtained for other real systems indicate that tag hierarchy extraction is a very promising direction for further research with a great potential for practical applications. Tags have become very prevalent nowadays in various online platforms ranging from blogs through scientific publications to protein databases. Furthermore, tagging systems dedicated for voluntary tagging of photos, films, books, etc. with free words are also becoming popular. The emerging large collections of tags associated with different objects are often referred to as folksonomies, highlighting their collaborative origin and the "flat" organization of the tags opposed to traditional hierarchical categorization. Adding a tag hierarchy corresponding to a given folksonomy can very effectively help narrowing or broadening the scope of search. Moreover

  9. Resinous constituent extracting process

    Energy Technology Data Exchange (ETDEWEB)

    Sayer, W F

    1947-10-07

    The method of recovering oily constituents from coal or oil shale comprising the saturation of coal or oil shale in a sealed vessel with an organic solution having a boiling point at atmospheric pressure of not exceeding 220/sup 0/C, elevating the temperature within the vessel to a temperature below the cracking temperature of the constituents and maintaining the pressure within the vessel below 51 pounds, to extract the oily material from the coal or oil shale and subsequently separating the solvent from the oily material.

  10. Microbiological metal extraction processes

    International Nuclear Information System (INIS)

    Torma, A.E.

    1991-01-01

    Application of biotechnological principles in the mineral processing, especially in hydrometallurgy, has created new opportunities and challenges for these industries. During the 1950's and 60's, the mining wastes and unused complex mineral resources have been successfully treated in bacterial assisted heap and dump leaching processes for copper and uranium. The interest in bio-leaching processes is the consequence of economic advantages associated with these techniques. For example, copper can be produced from mining wastes for about 1/3 to 1/2 of the costs of copper production by the conventional smelting process from high-grade sulfide concentrates. The economic viability of bio leaching technology lead to its world wide acceptance by the extractive industries. During 1970's this technology grew into a more structured discipline called 'bio hydrometallurgy'. Currently, bio leaching techniques are ready to be used, in addition to copper and uranium, for the extraction of cobalt, nickel, zinc, precious metals and for the desulfurization of high-sulfur content pyritic coals. As a developing technology, the microbiological leaching of the less common and rare metals has yet to reach commercial maturity. However, the research in this area is very active. In addition, in a foreseeable future the biotechnological methods may be applied also for the treatment of high-grade ores and mineral concentrates using adapted native and/or genetically engineered microorganisms. (author)

  11. Carcinogenicity of soil extracts

    Energy Technology Data Exchange (ETDEWEB)

    Shcherbak, N P

    1970-01-01

    A total of 270 3-mo-old mice, hybrids of the C57BL and CBA strains which are highly susceptible to carcinogens, were painted on the skin (2-3 admin./week) with 3-4 drops of (1) a concentrated benzene extract of soil taken near a petroleum refinery with a 3,4 benzpyrene (BP) content of 0.22%; (2) a 0.22% soln of pure BP in benzene; (3) a concentrated benzene extract of soil taken from an old residential area of Moscow (BP content 0.0004%); (4) a 0.0004% BP soln in benzene; and (5) pure benzene. Only mice in the first 2 groups developed tumors. In group (1), 8 mice had papillomas, 46 had skin cancer, 1 had a sarcoma and 2 had plasmocytomas. In group (2) all 60 animals had skin cancer. Lung metastases were present at autopsy in 5 mice in group (1) and in 10 mice in group (2); in some cases, these tumors were multiple. Lymph node metastases were found in 6 mice in group (1) and in 10 mice in group (2). Tumors developed more slowly in group (1) than in group (2).

  12. Supercritical fluid extraction of hops

    Directory of Open Access Journals (Sweden)

    ZORAN ZEKOVIC

    2007-01-01

    Full Text Available Five cultivars of hop were extracted by the method of supercritical fluid extraction using carbon dioxide (SFE–CO2 as extractant. The extraction (50 g of hop sample using a CO2 flow rate of 97.725 L/h was done in the two steps: 1. extraction at 150 bar and 40°C for 2.5 h (sample of series A was obtained and, after that, the same sample of hop was extracted in the second step: 2. extraction at 300 bar and 40 °C for 2.5 h (sample of series B was obtained. The Magnum cultivar was chosen for the investigation of the extraction kinetics. For the qualitative and quantitative analysis of the obtained hop extracts, the GC-MS method was used. Two of four themost common compounds of hop aroma (a-humulene and b-caryophyllene were detected in samples of series A. In addition, isomerized a-acids and a high content of b-acids were detected. The a-acids content in the samples of series B was the highest in the extract of the Magnum cultivar (it is a bitter variety of hop. The low contents of a-acids in all the other hop samples resulted in extracts with low a-acids content, i.e., that contents were under the prescribed a-acids content.

  13. Oxygen Extraction from Minerals

    Science.gov (United States)

    Muscatello, Tony

    2017-01-01

    Oxygen, whether used as part of rocket bipropellant or for astronaut life support, is a key consumable for space exploration and commercialization. In Situ Resource Utilization (ISRU) has been proposed many times as a method for making space exploration more cost effective and sustainable. On planetary and asteroid surfaces the presence of minerals in the regolith that contain oxygen is very common, making them a potential oxygen resource. The majority of research and development for oxygen extraction from minerals has been for lunar regolith although this work would generally be applicable to regolith at other locations in space. This presentation will briefly survey the major methods investigated for oxygen extraction from regolith with a focus on the current status of those methods and possible future development pathways. The major oxygen production methods are (1) extraction from lunar ilmenite (FeTiO3) with either hydrogen or carbon monoxide, (2) carbothermal reduction of iron oxides and silicates with methane, and (3) molten regolith electrolysis (MRE) of silicates. Methods (1) and (2) have also been investigated in a two-step process using CO reduction and carbon deposition followed by carbothermal reduction. All three processes have byproducts that could also be used as resources. Hydrogen or carbon monoxide reduction produce iron metal in small amounts that could potentially be used as construction material. Carbothermal reduction also makes iron metal along with silicon metal and a glass with possible applications. MRE produces iron, silicon, aluminum, titanium, and glass, with higher silicon yields than carbothermal reduction. On Mars and possibly on some moons and asteroids, water is present in the form of mineral hydrates, hydroxyl (-OH) groups on minerals, andor water adsorbed on mineral surfaces. Heating of the minerals can liberate the water which can be electrolyzed to provide a source of oxygen as well. The chemistry of these processes, some key

  14. Lithium extractive metallurgy

    International Nuclear Information System (INIS)

    Josa, J.M.; Merino, J.L.

    1985-01-01

    The Nuclear Fusion National Program depends on lithium supplies. Extractive metallurgy development is subordinate to the localization and evaluation of ore resources. Nowadays lithium raw materials usable with present technology consist of pegmatite ore and brine. The Instituto Geologico y Minero Espanol (IGME) found lepidolite, ambligonite and spodrimene in pegmatite ores in different areas of Spain. However, an evaluation of resources has not been made. Different Spanish surface and underground brines are to be sampled and analyzed. If none of these contain significant levels of lithium, the Junta de Energia Nuclear (JEN) will try an agreement with IGME for ENUSA (Empresa Nacional del Uranio, S.A.) to explore pegmatite-ore bodies from different locations. Different work stages, laboratory tests, pilots plants tests and commercial plant, are foreseen, if the deposits are found. (author)

  15. Uranium extraction technology

    International Nuclear Information System (INIS)

    1993-01-01

    In 1983 the Nuclear Energy Agency of the Organisation for Economic Co-operation and Development (OECD/NEA) and the IAEA jointly published a book on Uranium Extraction Technology. A primary objective of this report was to document the significant technological developments that took place during the 1970s. The purpose of this present publication is to update and expand the original book. It includes background information about the principle of the unit operations used in uranium ore processing and summarizes the current state of the art. The publication also seeks to preserve the technology and the operating 'know-how' developed over the past ten years. This publication is one of a series of Technical Reports on uranium ore processing that have been prepared by the Division of Nuclear Fuel Cycle and Waste Management at the IAEA. A complete list of these reports is included as an addendum. Refs, figs and tabs

  16. Influence of Extraction Parameters on Hydroalcohol Extracts of the ...

    African Journals Online (AJOL)

    ... the influence of alcohol concentration (50, 70 and 90 % v/v), extraction time (2, 6 and 10 h), and particle size of the herbal drug (0.25, 0.5 and 1.0 mm) on the pH, dry residue and myrsinoic acid B (MAB) content of hydroalcoholic extracts by high performance liquid chromatography (HPLC) method. Results: For the extracts, ...

  17. Supercritical carbon dioxide hop extraction

    Directory of Open Access Journals (Sweden)

    Pfaf-Šovljanski Ivana I.

    2005-01-01

    Full Text Available The hop of Magnum cultivar was extracted using supercritical carbon dioxide (SFE-as extractant. Extraction was carried out in the two steps: the first one being carried out at 150 bar and 40°C for 2.5 h (Extract A, and the second was the extraction of the same hop sample at 300 bar and 40°C for 2.5 h (Extract B. Extraction kinetics of the system hop-SFE-CO2 was investigated. Two of four most common compounds of hop aroma (α-humulene and β-caryophyllene were detected in Extract A. Isomerised α-acids and β-acids were detected too. a-Acid content in Extract B was high (that means it is a bitter variety of hop. Mathematical modeling using empirical model characteristic time model and simple single sphere model has been performed on Magnum cultivar extraction experimental results. Characteristic time model equations, best fitted experimental results. Empirical model equation, fitted results well, while simple single sphere model equation poorly approximated the results.

  18. Membrane extraction instead of solvent extraction - what does it give

    International Nuclear Information System (INIS)

    Macasek, F.

    1989-01-01

    Membrane extraction, i.e. separation in double-emulsion systems, is analyzed theoretically as a three-phase distribution process. Its efficiency is evaluated from the point of view of chemical equilibria and diffusion transport kinetics. The main advantages of membrane extraction as compared with solvent extraction are in higher yields (for preconcentration) and higher capacity for recovery of solutes. A pertraction factor and multiplication factor were defined. They are convenient parameters for numerical characterization of solute distribution, system capacity, process economics, and separation kinetics (both at a linear and non-linear extraction isotherm). 17 refs.; 4 figs

  19. Producing ashless coal extracts by microwave irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ozgur Sonmez; Elife Sultan Giray [Mersin University, Mersin (Turkey). Department of Chemistry

    2011-06-15

    To produce ashless coal extracts, three Turkish coals were extracted with N-methyl-2-pyrrolidinone (NMP), NMP/ethylenediamine (EDA) (17/1, vol/vol) mixture and NMP/tetralin (9/1, vol/vol) mixture through thermal extraction and microwave extraction. Solvent extraction by microwave irradiation (MI) was found to be more effective than that by thermal extraction. Extraction yield of coals in NMP enhanced by addition of a little EDA, but tetralin addition showed variances according to extraction method used. While tetralin addition caused a decrease in the thermal extraction yield, it increased the yield of the extraction by MI. Following the extraction, the solid extracts were produced with ash content ranging from 0.11% to 1.1%. Ash content of solid extract obtained from microwave extraction are less than ash contents of solid extracts obtained from thermal extraction. 34 refs., 7 figs., 5 tabs.

  20. Uranium extraction in phosphoric acid

    International Nuclear Information System (INIS)

    Araujo Figueiredo, C. de

    1984-01-01

    Uranium is recovered from the phosphoric liquor produced from the concentrate obtained from phosphorus-uraniferous mineral from Itataia mines (CE, Brazil). The proposed process consists of two extraction cycles. In the first one, uranium is reduced to its tetravalent state and then extracted by dioctylpyrophosphoric acid, diluted in Kerosene. Re-extraction is carried out with concentrated phosphoric acid containing an oxidising agent to convert uranium to its hexavalent state. This extract (from the first cycle) is submitted to the second cycle where uranium is extracted with DEPA-TOPO (di-2-hexylphosphoric acid/tri-n-octyl phosphine oxide) in Kerosene. The extract is then washed and uranium is backextracted and precipitated as commercial concentrate. The organic phase is recovered. Results from discontinuous tests were satisfactory, enabling to establish operational conditions for the performance of a continuous test in a micro-pilot plant. (Author) [pt

  1. Unsymmetrical phosphate as extractant for the extraction of nitric acid

    International Nuclear Information System (INIS)

    Gaikwad, R.H.; Jayaram, R.V.

    2016-01-01

    Tri-n-butyl phosphate (TBP) was first used as an extractant in 1944, during Manhattan project for the separation of actinides and further explored by Warf in 1949 for the extraction of Ce(IV) from aqueous nitric acid. TBP was further used as an extractant in the Plutonium Uranium Recovery by Extraction (PUREX) process. To meet the stringent requirements of the nuclear industry TBP has been extensively investigated. In spite of its wide applicability, TBP suffers from various disadvantages such as high aqueous solubility, third phase formation, chemical and radiation degradation leading to the formation of undesired products. It also suffers from incomplete decontamination of the actinides from fission products. Various attempts have been made to overcome the problems associated with TBP by way of using higher homologues of TBP such as Tri-iso amyl phosphate (TiAP), Tri-secondary butyl phosphate (TsBP), Tri amyl phosphate (TAP). It was found that in some cases the results were considerably better than those obtained with TBP for uranium/thorium extraction. The extraction of nitric acid by TBP and its higher homologues which are symmetrical are well documented. However, no solvent has emerged clearly superior than TBP. Here in we report the extraction of nitric acid with neutral unsymmetrical phosphates and study them as extractants for the extraction of nitric acid. Dibutyl secbutyl phosphate, dibutyl pentyl phosphate and dibutyl heptyl phosphate were synthesised for this purpose and the extraction of nitric acid was studied in n-dodecane. The results indicate that the substitution of one of the alkyl groups of the symmetrical phosphate adjacent to the phosphoryl (P=O) group of the phosphate does not have any pronounced effect on the extraction capacity of nitric acid. (author)

  2. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.

    1996-01-01

    The yellow cake refining was studied in both laboratory and semi-pilot scales. The process units mainly consist of dissolution and filtration, solvent extraction, and precipitation and filtration. Effect of flow ratio (organic flow rate/ aqueous flow rate) on working efficiencies of solvent extraction process was studied. Detailed studies were carried out on extraction, scrubbing and stripping processes. Purity of yellow cake product obtained is high as 90.32% U 3 O 8

  3. New extraction technique for alkaloids

    Directory of Open Access Journals (Sweden)

    Djilani Abdelouaheb

    2006-01-01

    Full Text Available A method of extraction of natural products has been developed. Compared with existing methods, the new technique is rapid, more efficient and consumes less solvent. Extraction of alkaloids from natural products such as Hyoscyamus muticus, Datura stramonium and Ruta graveolens consists of the use of a sonicated solution containing a surfactant as extracting agent. The alkaloids are precipitated by Mayer reagent, dissolved in an alkaline solution, and then extracted with chloroform. This article compares the results obtained with other methods showing clearly the advantages of the new method.

  4. ANTHOCYANINS ALIPHATIC ALCOHOLS EXTRACTION FEATURES

    Directory of Open Access Journals (Sweden)

    P. N. Savvin

    2015-01-01

    Full Text Available Anthocyanins red pigments that give color a wide range of fruits, berries and flowers. In the food industry it is widely known as a dye a food additive E163. To extract from natural vegetable raw materials traditionally used ethanol or acidified water, but in same technologies it’s unacceptable. In order to expand the use of anthocyanins as colorants and antioxidants were explored extracting pigments alcohols with different structures of the carbon skeleton, and the position and number of hydroxyl groups. For the isolation anthocyanins raw materials were extracted sequentially twice with t = 60 C for 1.5 hours. The evaluation was performed using extracts of classical spectrophotometric methods and modern express chromaticity. Color black currant extracts depends on the length of the carbon skeleton and position of the hydroxyl group, with the alcohols of normal structure have higher alcohols compared to the isomeric structure of the optical density and index of the red color component. This is due to the different ability to form hydrogen bonds when allocating anthocyanins and other intermolecular interactions. During storage blackcurrant extracts are significant structural changes recoverable pigments, which leads to a significant change in color. In this variation, the stronger the higher the length of the carbon skeleton and branched molecules extractant. Extraction polyols (ethyleneglycol, glycerol are less effective than the corresponding monohydric alcohols. However these extracts saved significantly higher because of their reducing ability at interacting with polyphenolic compounds.

  5. Passive vapor extraction feasibility study

    International Nuclear Information System (INIS)

    Rohay, V.J.

    1994-01-01

    Demonstration of a passive vapor extraction remediation system is planned for sites in the 200 West Area used in the past for the disposal of waste liquids containing carbon tetrachloride. The passive vapor extraction units will consist of a 4-in.-diameter pipe, a check valve, a canister filled with granular activated carbon, and a wind turbine. The check valve will prevent inflow of air that otherwise would dilute the soil gas and make its subsequent extraction less efficient. The granular activated carbon is used to adsorb the carbon tetrachloride from the air. The wind turbine enhances extraction rates on windy days. Passive vapor extraction units will be designed and operated to meet all applicable or relevant and appropriate requirements. Based on a cost analysis, passive vapor extraction was found to be a cost-effective method for remediation of soils containing lower concentrations of volatile contaminants. Passive vapor extraction used on wells that average 10-stdft 3 /min air flow rates was found to be more cost effective than active vapor extraction for concentrations below 500 parts per million by volume (ppm) of carbon tetrachloride. For wells that average 5-stdft 3 /min air flow rates, passive vapor extraction is more cost effective below 100 ppm

  6. Supercritical fluid extraction of uranium

    International Nuclear Information System (INIS)

    Kumar, Pradeep

    2017-01-01

    Uranium being strategic material, its separation and purification is of utmost importance in nuclear industry, for which solvent extraction is being employed. During solvent extraction significant quantity of radioactive liquid waste gets generated which is of environmental concern. In recent decades supercritical fluid extraction (SFE) has emerged as promising alternative to solvent extraction owing to its inherent advantage of reduction in liquid waste generation and simplification of process. In this paper a brief overview of research work carried out so far on SFE of uranium by BARC has been given

  7. Sterically hindered solvent extractants

    International Nuclear Information System (INIS)

    Solka, J.L.; Reis, A.H. Jr.; Mason, G.W.; Lewey, S.M.; Peppard, D.F.

    1978-01-01

    Di-t-pentylphosphinic acid, [C(CH 3 ) 2 (CH 2 CH 3 )] 2 PO(OH), H[Dt-PeP], has been shown by single-crystal X-ray diffraction data to be dimeric in the solid state. H[Dt-PeP] crystallizes in the centro-symmetric orthorhombic space group, Cmca, with unit cell parameters, a = 17.694(7), b = 11.021(4), and c = 13.073(5) A, and Z = 8, indicating that the molecule must conform to a crystallographic mirror plane or 2-fold axis. A measured density of 1.088 g/cm 3 is in good agreement with a calculated value of 1.074 g/cm 3 for a unit cell volume of 2549.3(A) 3 and a formula weight of 206.25 g. A total of 646 three-dimensional X-ray data were collected on an automated XRD-490 G.E. diffractometer. The structure was solved using a combination of direct methods, Patterson, Fourier, and least-squares refinement techniques. Refinement of the data indicates that H[Dt-PeP] is dimeric, and contains a mirror plane in which the hydrogen-bonded, eight-membered ring lies. A structural disorder involving principally the ethylene carbon but affecting the methyl carbons as well precluded a precise determination of the carbon positions and severely reduced the precision of the final refinement. In the liquid-liquid extraction system consisting of a solution of H[Dt-PeP] in benzene vs an acidic aqueous chloride phase, the extraction of UO 2 2+ follows the stoichiometry: UO 2 sub(A) 2+ + 2(HY) 2 subO = UO 2 (HY 2 ) 2 sub(O) + 2Hsub(A) + where (HY) 2 represents the dimer of H[Dt-PeP] and A and O represent the mutually equilibrated aqueous and organic phases. The expression for the distribution ratio, k, for UO 2 2+ is given. (author)

  8. Plutonium and americium extraction studies with bifunctional organophosphorus extractants

    International Nuclear Information System (INIS)

    Navratil, J.D.

    1985-01-01

    Neutral bifunctional organophosphorus extractants, such as octylphenyl-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) and dihexyl-N,N-diethylcarbamoylmethylphosphonate (CMP), are under study at the Rocky Flats Plant (RFP) to remove plutonium and americium from the 7M nitric acid waste. These compounds extract trivalent actinides from strong nitric acid, a property which distinguishes them from monofunctional organiphosphorus reagents. Furthermore, the reagents extract hydroytic plutonium (IV) polymer which is present in the acid waste stream. The compounds extract trivalent actinides with a 3:1 stoichiometry, whereas tetra- and hexavalent actinides extract with a stoichiometry of 2:1. Preliminary studies indicate that the extracted plutonium polymer complex contains one to two molecules of CMP per plutonium ion and the plutonium(IV) maintains a polymeric structure. Recent studies by Horwitz and co-workers conclude that the CMPO and CMP reagents behave as monodentate ligands. At RFP, three techniques are being tested for using CMP and CMPO to remove plutonium and americium from nitric acid waste streams. The different techniques are liquid-liquid extraction, extraction chromatography, and solid-supported liquid membranes. Recent tests of the last two techniques will be briefly described. In all the experiments, CMP was an 84% pure material from Bray Oil Co. and CMPO was 98% pure from M and T Chemicals

  9. determination of lipophilic extractives in ionic liquid extracts

    African Journals Online (AJOL)

    dell

    Chem. 9: 63-69. Freire CSR, Pinto PCR, Santiago AS,. Silvestre AJD, Evtuquin DV and Neto. CP 2006a Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps. BioResources. 1: 3-17. Freire CSR, Silvestre AJD and Neto CP. 2005. Lipophilic extractives in. Eucalyptus globulus.

  10. Nonlocal Intracranial Cavity Extraction

    Science.gov (United States)

    Manjón, José V.; Eskildsen, Simon F.; Coupé, Pierrick; Romero, José E.; Collins, D. Louis; Robles, Montserrat

    2014-01-01

    Automatic and accurate methods to estimate normalized regional brain volumes from MRI data are valuable tools which may help to obtain an objective diagnosis and followup of many neurological diseases. To estimate such regional brain volumes, the intracranial cavity volume (ICV) is often used for normalization. However, the high variability of brain shape and size due to normal intersubject variability, normal changes occurring over the lifespan, and abnormal changes due to disease makes the ICV estimation problem challenging. In this paper, we present a new approach to perform ICV extraction based on the use of a library of prelabeled brain images to capture the large variability of brain shapes. To this end, an improved nonlocal label fusion scheme based on BEaST technique is proposed to increase the accuracy of the ICV estimation. The proposed method is compared with recent state-of-the-art methods and the results demonstrate an improved performance both in terms of accuracy and reproducibility while maintaining a reduced computational burden. PMID:25328511

  11. Nonlocal Intracranial Cavity Extraction

    Directory of Open Access Journals (Sweden)

    José V. Manjón

    2014-01-01

    Full Text Available Automatic and accurate methods to estimate normalized regional brain volumes from MRI data are valuable tools which may help to obtain an objective diagnosis and followup of many neurological diseases. To estimate such regional brain volumes, the intracranial cavity volume (ICV is often used for normalization. However, the high variability of brain shape and size due to normal intersubject variability, normal changes occurring over the lifespan, and abnormal changes due to disease makes the ICV estimation problem challenging. In this paper, we present a new approach to perform ICV extraction based on the use of a library of prelabeled brain images to capture the large variability of brain shapes. To this end, an improved nonlocal label fusion scheme based on BEaST technique is proposed to increase the accuracy of the ICV estimation. The proposed method is compared with recent state-of-the-art methods and the results demonstrate an improved performance both in terms of accuracy and reproducibility while maintaining a reduced computational burden.

  12. Study on the extraction kinetics of U(IV) extraction with neutral phosphoric extractant

    International Nuclear Information System (INIS)

    Lin Zhou; Liao Shishu; Li Zhou

    1995-04-01

    The extraction kinetics of U(IV) in the diisooctyl isobutylphosphonate system has been studied by using the single drop method. The effects of the concentrations of U(IV), HCl and extractant on the extraction rate have been examined. In a certain HCl concentration, the extraction rate equation has been acquired and in the condition of various HCl concentration the extraction rate of U(IV) is proportional to [HCl 1.51 . The effect of operation temperature was also examined, and the calculated apparent activation energy is equal to 23.24 kJ/mol. From the experimental results, the extraction reaction process and the rate-controlling step have been deduced. (4 figs., 5 tabs.)

  13. Effect of soybean extract after tooth extraction on osteoblast numbers

    Directory of Open Access Journals (Sweden)

    Rosa Sharon Suhono

    2011-06-01

    Full Text Available Background: Many researches were done to find natural materials that may increase and promote bone healing processes after trauma and surgery. One of natural material that had been studied was soybean extract which contains phytoestrogen, a non-steroidal compounds found in plants that may binds to estrogen receptors and have estrogen-like activity. Purpose: The aim of this study was to investigate the effect of soybean extract feeding on the number of osteoblast cells in alveolar bone socket after mandibular tooth extraction. Methods: This study was studied on male Rattus norvegicus strain Wistar. Seventeen rats divided into three groups were used in this study. Group 1 fed with carboxy methyl cellulose (CMC solution 0,2% for seven days, and the left mandibular central incisivus was extracted; group 2 fed with soybean extract for seven days and the left mandibular central incisives was extracted; group 3 received the left mandibular central incisives extraction followed by soybean extract feeding for seven days after the extraction. All groups were sacrificed on the seventh day post-extraction, and the alveolar bone sockets were taken for histopathological observation. The tissues were processed and stained using hematoxylin and eosin to identify the amount of osteoblast cells. The number of osteoblast cells was counted using an Image Tool program. The data was analyzed statistically using the One-Way ANOVA test. Results: Significant differences were found on the number of osteoblast cells in alveolar bone after tooth extraction between groups. Group 2 (fed with soybean extract is higher than group 1 (fed with CMC and group 3 (fed with soybean extract after extraction. Conclusion: Soybean extract feeding that given for seven days pre-tooth extraction can increase the number of osteoblast cells compared with the group that were not given soybean extract feeding and also with the group that were given soybean extract feeding for seven days post

  14. Extraction systems of the SPS

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    A pair of prototype septum magnets for the extraction systems of the SPS. Each of the two extraction systems will contain eighteen of these septum magnets (eight with a 4 mm septum and ten with a 16 mm septum) mounted in pairs in nine vacuum tanks.

  15. [Endoscopic extraction of gallbladder calculi].

    Science.gov (United States)

    Kühner, W; Frimberger, E; Ottenjann, R

    1984-06-29

    Endoscopic extraction of gallbladder stones were performed, as far as we know for the first time, in three patients with combined choledochocystolithiasis. Following endoscopic papillotomy (EPT) and subsequent mechanical lithotripsy of multiple choledochal concrements measuring up to 3 cm the gallbladder stones were successfully extracted with a Dormia basket through the cystic duct. The patients have remained free of complications after the endoscopic intervention.

  16. Extractive separation of tellurium(4)

    International Nuclear Information System (INIS)

    Gawali, S.B.; Shinde, V.M.

    1977-01-01

    A method is described for the extraction of tellurium (4) from hydrobromic acid media using 4-methyl-2-pentanol as an extractant. The method affords the determination of tellurium after its separation from Se, Au, Cu, Pb, Fe, Os, V and Al. (author)

  17. Solids recycling in solvent extraction

    International Nuclear Information System (INIS)

    Robinson, L.F.

    1980-01-01

    In an extraction process for extracting values from a first stream into a substantially immiscible second stream using a multi-compartmental rotary contactor, unwanted solids formed in the contactor and discharged at least partly with the the first stream are separated and re-entered into the contactor intermediate the points at which the streams are discharged. (author)

  18. Parallel artificial liquid membrane extraction

    DEFF Research Database (Denmark)

    Gjelstad, Astrid; Rasmussen, Knut Einar; Parmer, Marthe Petrine

    2013-01-01

    This paper reports development of a new approach towards analytical liquid-liquid-liquid membrane extraction termed parallel artificial liquid membrane extraction. A donor plate and acceptor plate create a sandwich, in which each sample (human plasma) and acceptor solution is separated by an arti......This paper reports development of a new approach towards analytical liquid-liquid-liquid membrane extraction termed parallel artificial liquid membrane extraction. A donor plate and acceptor plate create a sandwich, in which each sample (human plasma) and acceptor solution is separated...... by an artificial liquid membrane. Parallel artificial liquid membrane extraction is a modification of hollow-fiber liquid-phase microextraction, where the hollow fibers are replaced by flat membranes in a 96-well plate format....

  19. Uranium extraction from phosphoric acid

    International Nuclear Information System (INIS)

    Lounis, A.

    1983-05-01

    A study has been carried out for the extraction of uranium from phosphoric acid produced in Algeria. First of all, the Algerian phosphoric acid produced in Algeria by SONATRACH has been characterised. This study helped us to synthesize a phosphoric acid that enabled us to pass from laboratory tests to pilot scale tests. We have then examined extraction and stripping parameters: diluent, DZEPHA/TOPO ratio and oxidising agent. The laboratory experiments enabled us to set the optimum condition for the choice of diluent, extractant concentration, ratio of the synergic mixture, oxidant concentration, redox potential. The equilibrium isotherms lead to the determination of the number of theoretical stages for the uranium extraction and stripping of uranium, then the extraction from phosphoric acid has been verified on a pilot scale (using a mixer-settler)

  20. Improving IUE High Dispersion Extraction

    Science.gov (United States)

    Lawton, Patricia J.; VanSteenberg, M. E.; Massa, D.

    2007-01-01

    We present a different method to extract high dispersion International Ultraviolet Explorer (IUE) spectra from the New Spectral Image Processing System (NEWSIPS) geometrically and photometrically corrected (SI HI) images of the echellogram. The new algorithm corrects many of the deficiencies that exist in the NEWSIPS high dispersion (SIHI) spectra . Specifically, it does a much better job of accounting for the overlap of the higher echelle orders, it eliminates a significant time dependency in the extracted spectra (which can be traced to the background model used in the NEWSIPS extractions), and it can extract spectra from echellogram images that are more highly distorted than the NEWSIPS extraction routines can handle. Together, these improvements yield a set of IUE high dispersion spectra whose scientific integrity is sign ificantly better than the NEWSIPS products. This work has been supported by NASA ADP grants.

  1. Selectivity in extraction of copper and indium with chelate extractants

    International Nuclear Information System (INIS)

    Zivkovic, D.

    2003-01-01

    Simultaneous extraction of copper and indium with chelate extractants (LIX84 and D2E11PA) was described. Stechiometry of metal-organic complexes examined using the method of equimolar ratios resulted in CuR 2 and InR 3 forms of hydrophobic extracting species. A linear correlation was obtained between logarithm of distribution coefficients and chelate agents and pH, respectively. Selectivity is generally higher with higher concentrations of chelate agents in the organic phase, and is decreased with increase of concentration of hydrogen ions in feeding phase. (Original)

  2. Selective extraction of natural bitumen

    International Nuclear Information System (INIS)

    Starshov, M.; Starshov, I.

    1991-01-01

    The work performed in the field of natural bitumen extraction is aimed at maximum separation of organic phase. On treating bituminous rocks with solvents, the associated metals are extracted together with the organic phase and may further exert a negative effect on refining of natural bitumen. the authors propose a simplified two stage technique for the extraction of bitumen which enables to utilize V and Ni contained in the concentrate of the second stage extraction (Table). At the first stage, negative bitumen is extracted with the summary content of metals not exceeding 0.005%. This allows to avoid de metallization of native bitumen and subject it to treatment by catalytic cracking. during this stage gasoline and kerosene fractions, different oil distillates and condensates can be used as solvents. at the second stage, aromatic and halo id compounds bearing wastes and by-products, i.e. cheap and non deficient reagents, serve as solvents. The technology was tested under laboratory conditions using Tatar bituminous sands. It is also possible to use one solvent only, however, on condition that at first the oil product with the summary metal content below 0.005%, and then the remaining product is extracted. The proposed technology has proved so universal that it can be applied to refining any type of raw material to be found in the territory of the Tatar republic, using surface extraction complexes. (author). 9 refs., tab

  3. Mineral extraction and transport device

    Energy Technology Data Exchange (ETDEWEB)

    Plaga, K.

    1991-08-21

    A device for the extraction and transport of stratified mineral deposits notably coal, having a transport run with lengths of transport troughing, an extraction run with lengths of extraction troughing, and a power-driven traction chain guided round return devices and carrying extraction bodies together with optional transport units. The transport and extraction troughing have guide members on which the extraction bodies and the transport units are guided with the aid of guide formations. Each extraction body consists of a headpiece having two laterally protruding guide formations, and an endpiece having two laterally protruding guide formations and a centrepiece. The headpiece and the endpiece are swivellably linked to the centrepiece through an axis running substantially at right angles to the traction axis of the traction chain and substantially at right angles to the floor of the lengths of transport troughing in the transport run. The centrepiece has an additional articulation about an axis substantially orthogonal to the swivel axis of the headpiece and the endpiece. Guide members are additionally provided in the vicinity of the return devices whereby the guide formations on each headpiece and endpiece receive continued guidance.

  4. Selective solvent extraction of oils

    Energy Technology Data Exchange (ETDEWEB)

    1938-04-09

    In the selective solvent extraction of naphthenic base oils, the solvent used consists of the extract obtained by treating a paraffinic base oil with a selective solvent. The extract, or partially spent solvent is less selective than the solvent itself. Selective solvents specified for the extraction of the paraffinic base oil are phenol, sulphur dioxide, cresylic acid, nitrobenzene, B:B/sup 1/-dichlorethyl ether, furfural, nitroaniline and benzaldehyde. Oils treated are Coastal lubricating oils, or naphthenic oils from the cracking, or destructive hydrogenation of coal, tar, lignite, peat, shale, bitumen, or petroleum. The extraction may be effected by a batch or counter-current method, and in the presence of (1) liquefied propane, or butane, or naphtha, or (2) agents which modify the solvent power such as, water, ammonia, acetonitrile, glycerine, glycol, caustic soda or potash. Treatment (2) may form a post-treatment effected on the extract phase. In counter-current treatment in a tower some pure selective solvent may be introduced near the raffinate outlet to wash out any extract therefrom.

  5. Extraction of uranium with emulsion membrane process use tributylphosphate extractant

    International Nuclear Information System (INIS)

    Basuki, K.T.; Sudibyo, R.; Bambang EHB; Muhadi, A.W.

    1996-01-01

    To increase the effectiveness of extraction process with so for to occur, it was tried the extraction with a couple of extraction and stripping process. This couple process was called liquid membrane emulsion. As membrane was used mix surfactant (Span-80), tributylphosphate in kerosene, natrium carbonate, while as a feeder was uranium solution with 500 concentration ppm in 0.5 - 3 M nitrate acid. In this experiment the variable investigated were % surfactant (1 - 5 %), rotary speed for membrane making (2,500 - 10.000 rpm). The optimal condition result of experiment were 5 % surfactant, 3 M nitrate acid, rotary speed 10.000 rpm and (Kd eksU ) 57 %, and (Kd strippU ) 87 %, Kd eksU at liquid-liquid extraction is 44 %. (author)

  6. Actinides complexes in solvent extraction. The amide type of extractants

    International Nuclear Information System (INIS)

    Musikas, C.; Condamines, N.; Charbonnel, M.C.; Hubert, H.

    1989-01-01

    The N,N-dialkylamides and the N,N'-tetraalkyl. 2-alkyl 1,3-diamide propane are two promising classes of extractants which could replace advantageously the organophosphorus molecules for the separations of the actinide. The main advantages of the amides lie in their complete incinerability and the small interference of their radiolytic and hydrolytic degradation products for the processes. The actinide extraction chemistry with various amides is reviewed in this paper

  7. Adult orthodontic therapy: extraction versus non-extraction.

    Science.gov (United States)

    Baumrind, S

    1998-11-01

    This study addresses the problem of randomization of subjects with respect to an irreversible aspect of treatment strategy, namely, the extraction of teeth. The investigation includes both prospective and retrospective components. The data presented focus on clinician decision-making. Of the 1321 potential subjects for whom records were taken, 250 met the inclusion criteria. Of these subjects, 82 declined to participate and 20 were dropped because of difficulty in obtaining five independent evaluations of their records within a reasonable time frame. Thus, the final sample contained 148 subjects. Approximately one-third of the subjects in the sample are adult, somewhat more than half are female, and Class I malocclusions outnumber Class II malocclusions by a count of 95 to 53. Patterns of agreement and disagreement among five clinicians include: a) agreement/disagreement on the primary decision whether or not to extract: the data reveal a strong tendency towards consensus among the clinicians; b) agreement/disagreement on extraction pattern in patients in whom the clinician believes that extraction is indicated: the clinicians tended strongly to agree on extraction pattern; c) agreement/disagreement on the need for adjunctive orthognathic surgery: decisions favoring surgery were more common and more 'definite' than 'probable' in the adult cohort than in the adolescent cohort but this tendency was not as strong as had been anticipated; d) agreement/disagreement concerning Angle classification: disagreements were more common than had been anticipated; and e) differences among the individual clinicians as to their ratios of extraction/non-extraction decisions: overall, clinicians opted for extraction less frequently in the adolescent cohort than in the adult cohort (55 vs. 66%). Because the data are drawn from actual clinical experience, the conclusions involve a number of assumptions and their generalizability should be evaluated.

  8. Novel Fluorinated Tensioactive Extractant Combined with Flotation for Decontamination of Extractant Residual during Solvent Extraction

    Science.gov (United States)

    Wu, Xue; Chang, Zhidong; Liu, Yao; Choe, Chol Ryong

    2017-12-01

    Solvent-extraction is widely used in chemical industry. Due to the amphiphilic character, a large amount of extractant remains in water phase, which causes not only loss of reagent, but also secondary contamination in water phase. Novel fluorinated extractants with ultra-low solubility in water were regarded as effective choice to reduce extractant loss in aqueous phase. However, trace amount of extractant still remained in water. Based on the high tensioactive aptitude of fluorinated solvent, flotation was applied to separate fluorinated extractant remaining in raffinate. According to the data of surface tension measurement, the surface tension of solution was obviously decreased with the addition of fluorinated extractant tris(2,2,3,3,4,4,5,5-octafluoropentyl) phosphate (FTAP). After flotation, the FTAP dissolved in water can be removed as much as 70%, which proved the feasibility of this key idea. The effects of operation time, gas velocity, pH and salinity of bulk solution on flotation performance were discussed. The optimum operating parameters were determined as gas velocity of 12ml/min, operating time of 15min, pH of 8.7, and NaCl volume concentration of 1.5%, respectively. Moreover, adsorption process of FTAP on bubble surface was simulated by ANSYS VOF model using SIMPLE algorithm. The dynamic mechanism of flotation was also theoretically investigated, which can be considered as supplement to the experimental results.

  9. TSCA Inventory Data Extraction Tool

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data extraction tool contains the non confidential identities of chemical substances submitted under the Toxic Substances Control Act (TSCA). TSCA was enacted...

  10. Combined keratoplasty and cataract extraction.

    Science.gov (United States)

    Demeler, U; Hinzpeter, E N

    1977-04-01

    A short film showing our technique of combined penetrating keratoplasty and intracapsular cataract extraction was shown, and the postoperative results in 72 eyes after an average of 3 years were reported.

  11. Extractive spectrophotometric determination of thorium

    International Nuclear Information System (INIS)

    Venkatesan, M.; Gopalakrishnan, V.; Ramanujam, A.; Nadkarni, M.N.

    1981-01-01

    An extractive spectrophotometric method has been standardized for the analysis of 0.2 to 1.6 milligrams of thorium present in nitric acid solutions. The method involves the extraction of thorium from nitric acid solutions into 0.5 M thenoyl trifluoro acetone (HTTA) in benzene and its direct estimation from the organic extract by spectrophotometry as Thoron colour complex. In this method, interference due to iron upto 5 milligrams can be suppressed by adding ascorbic acid in the ratio of 1:2 prior to HTTA extraction. Uranium(VI) does not interefere even when present in 2000 times the amount of thorium. Plutonium and cerium do not interfere at one milligram level whereas zirconium interferes in this method. The overall error variation and precision of this method has been determined to be +- 3.5%. (author)

  12. Extraction chromatography of fission products

    International Nuclear Information System (INIS)

    Bonnevie-Svendsen, M.; Goon, K.

    1978-01-01

    Various cases of using extraction chromatography during analysis of fission products are reviewed. The use of the extraction chromatography method is considered while analysing reprocessed products of nuclear fuel for quantitative radiochemical analysis and control of fission product and actinoide separation during extraction and their chemical state in production solutions. The method is used to obtain pure fractions of typical burnup monitors (neodymium, molybdenum, cerium, cesium, europium, lanthanides) during determination of nuclear fuel burnup degree. While studying the nature of nuclear reactions the method is used to separate quickly short-life isotopes, to purify β-radiator fractions before measuring their half-life periods, to enrich isotopes forming with low output during fission. Examples of using extraction chromatography are given to separate long half-life or stable fission products from spent solutions, to control environment object contamination

  13. Coil for LEAR extraction septum

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    Which way does the current flow ? This intriguing object is the coil for the LEAR extraction septum. There were two septa, first a thin one, then this one, not so thin, somewhat on the borderline between septum and bending magnet.

  14. Scenario Customization for Information Extraction

    National Research Council Canada - National Science Library

    Yangarber, Roman

    2001-01-01

    Information Extraction (IE) is an emerging NLP technology, whose function is to process unstructured, natural language text, to locate specific pieces of information, or facts, in the text, and to use these facts to fill a database...

  15. VT Mineral Resources - MRDS Extract

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) MRDSVT is an extract from the Mineral Resources Data System (MRDS) covering the State of Vermont only. MRDS database contains the records provided...

  16. Process for extracting oil shale

    Energy Technology Data Exchange (ETDEWEB)

    1920-08-22

    A process is described for recovering bituminous material from oil shale, characterized in that the oil shale is extracted with wood spirits oil (byproduct of woodspirit rectification), if necessary in admixture with other solvents in the cold or the hot.

  17. aqueous root extract on spermatogenesis

    African Journals Online (AJOL)

    Four groups were gavaged with the whole plant or root aqueous extract in low or high doses. The male ... motility and morphology as well as chromatin integrity were evaluated. Results: Serum ... Treatment of disease began long ago with the.

  18. Bio technologies in extractive metallurgy

    International Nuclear Information System (INIS)

    Morin, D.

    1995-01-01

    The bio technologies processes used (or used in the future) in extractive metallurgy are presented. The most advanced one is the degradation of the metals sulfides (bacteria catalyzing the sulfides oxidation of Au, Cu, U). Two other applications outside the extractive metallurgy are also described: metals fixation by living or dead organic matter and the biological destruction of organic reactants such as cyanides. (A.B.)

  19. Advanced integrated solvent extraction systems

    Energy Technology Data Exchange (ETDEWEB)

    Horwitz, E.P.; Dietz, M.L.; Leonard, R.A. [Argonne National Lab., IL (United States)

    1997-10-01

    Advanced integrated solvent extraction systems are a series of novel solvent extraction (SX) processes that will remove and recover all of the major radioisotopes from acidic-dissolved sludge or other acidic high-level wastes. The major focus of this effort during the last 2 years has been the development of a combined cesium-strontium extraction/recovery process, the Combined CSEX-SREX Process. The Combined CSEX-SREX Process relies on a mixture of a strontium-selective macrocyclic polyether and a novel cesium-selective extractant based on dibenzo 18-crown-6. The process offers several potential advantages over possible alternatives in a chemical processing scheme for high-level waste treatment. First, if the process is applied as the first step in chemical pretreatment, the radiation level for all subsequent processing steps (e.g., transuranic extraction/recovery, or TRUEX) will be significantly reduced. Thus, less costly shielding would be required. The second advantage of the Combined CSEX-SREX Process is that the recovered Cs-Sr fraction is non-transuranic, and therefore will decay to low-level waste after only a few hundred years. Finally, combining individual processes into a single process will reduce the amount of equipment required to pretreat the waste and therefore reduce the size and cost of the waste processing facility. In an ongoing collaboration with Lockheed Martin Idaho Technology Company (LMITCO), the authors have successfully tested various segments of the Advanced Integrated Solvent Extraction Systems. Eichrom Industries, Inc. (Darien, IL) synthesizes and markets the Sr extractant and can supply the Cs extractant on a limited basis. Plans are under way to perform a test of the Combined CSEX-SREX Process with real waste at LMITCO in the near future.

  20. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.; Srinuttrakul, W.

    2014-01-01

    The solvent extraction process to produce higher purity uranium from yellowcake was studied in laboratory scale. Yellowcake, which the uranium purity is around 70% and the main impurity is thorium, was obtained from monazite processing pilot plant of Rare Earth Research and Development Center in Thailand. For uranium re-extraction process, the extractant chosen was Tributylphosphate (TBP) in kerosene. It was found that the optimum concentration of TBP was 10% in kerosene and the optimum nitric acid concentration in uranyl nitrate feed solution was 4 N. An increase in concentrations of uranium and thorium in feed solution resulted in a decrease in the distribution of both components in the extractant. However, the distribution of uranium into the extractant was found to be more than that of thorium. The equilibration study of the extraction system, UO_2(NO_3)/4N HNO_3 – 10%TBP/Kerosene, was also investigated. Two extraction stages were calculated graphically from 100,000 ppm uranium concentration in feed solution input with 90% extraction efficiency and the flow ratio of aqueous phase to organic phase was adjusted to 1.0. For thorium impurity scrubbing process, 10% TBP in kerosene was loaded with uranium and minor thorium from uranyl nitrate solution prepared from yellowcake and was scrubbed with different low concentration nitric acid. The results showed that at nitric acid normality was lower than 1 N, uranium distributed well to aqueous phase. As conclusion, optimum nitric acid concentration for scrubbing process should not less than 1 N and diluted nitric acid or de-ionized water should be applied to strip uranium from organic phase in the final refining process. (author)

  1. Extracting useful information from images

    DEFF Research Database (Denmark)

    Kucheryavskiy, Sergey

    2011-01-01

    The paper presents an overview of methods for extracting useful information from digital images. It covers various approaches that utilized different properties of images, like intensity distribution, spatial frequencies content and several others. A few case studies including isotropic and heter......The paper presents an overview of methods for extracting useful information from digital images. It covers various approaches that utilized different properties of images, like intensity distribution, spatial frequencies content and several others. A few case studies including isotropic...

  2. Extractive Summarisation of Medical Documents

    OpenAIRE

    Abeed Sarker; Diego Molla; Cecile Paris

    2012-01-01

    Background Evidence Based Medicine (EBM) practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medic...

  3. Phoenix I energy extraction experiment

    International Nuclear Information System (INIS)

    Hoffman, J.M.; Patterson, E.L.; Tisone, G.C.; Moreno, J.B.

    1980-07-01

    Energy extraction experiments are reported for the Phoenix I amplifier driven by a discharge-initiated oscillator-preamplifier system operating on mixtures of either SF 6 -HI or SF 6 -C 2 H 6 and an electron-beam-initiated intermediate amplifer (lambda-3) fueled with H 2 and F 2 mixtures. When the oscillator-preamplifier system operated with mixtures of SF 6 -HI the input spectrum to the Phoenix I amplifier contained approx. 28 P-branch vibrational-rotational lines which were almost identical to the input spectrum from the H 2 -F 2 fueled oscillator. In this case the energy extraction measurements were essentially the same as the results obtained with the spectrum produced using H 2 and F 2 mixtures. For an input intensity of 10 7 W/cm 2 , 170 J were extracted from the amplifier. With the SF 6 -C 2 H 6 spectrum, extraction was only obtained from the first three excited vibrational levels. This result indicates that most of the energy in the amplifier could be extracted on the first three excited vibrational levels. It is shown that the extraction results can be fit with a simple two level model. The radius of curvature of the beam was estimated using a lateral shearing interferometer. It was found that the Phoenix I amplifier altered the radius of curvature

  4. The method for simultaneous extraction and back extraction in liquid three-phase system and equipment for simultaneous extraction and back extraction in liquid three-phase system

    International Nuclear Information System (INIS)

    Palyska, W.; Chmielewski, A.G.

    1992-01-01

    The method for simultaneous extraction and back extraction in liquid three-phase system has been worked out. The equipment designed for that process has been also subject of the patent. The interesting component is extracted first to intermediate phase consists of magnetic solvent keeping two extracting phases separately. The intermediate magnetic liquid has been kept in its position using a stable magnet maintained on the surface of the extraction vessel. Then the component pass from intermediate phase to the third phase as a result of back extraction. Mixing in the extraction and back extraction zones is organized by means of rotating shaft going along the whole apparatus. The extraction and back extraction processes occur simultaneously as a result of continuous flow of solvent in their zones. The single extraction back extraction facilities can be joined in larger batteries. 3 figs

  5. Extraction and characterization of galactomannan extracted from Prosopis juliflora seeds

    International Nuclear Information System (INIS)

    Rodrigues, Delane da C.; Cunha, Arcelina P.; Oliveira, Williara Q. de; Gallao, Maria Izabel; Azeredo, Henriette M. C de

    2015-01-01

    Different seeds are rich in polysaccharides, which are widely used in research and in industry. The objective was to extract galactomannan from mesquite seeds (Prosopis juliflora) and evaluate their chemical properties for future application in edible films. To test the feasibility of using the polysaccharide, the yield was obtained and the material analyzed by Thermal Analysis (TGA-Thermogravimetric Analysis and Calorimetry Differential Scanning-DSC), Spectroscopy Infrared Region Fourier Transform (FTIR) and Nuclear Magnetic Resonance (NMR). According to the results, the galactomannan was equivalent with the polysaccharides extracted from other sources except for the low yield (6.6%). (author)

  6. NMR investigation of coal extracts

    Energy Technology Data Exchange (ETDEWEB)

    Lang, I; Sebor, G [Ceskoslovenska Akademie Ved, Prague. Hornicky Ustav; Sebor, G Jr; Hajek, M; Mostecky, J [Vysoka Skola Chemicko-Technologicka, Prague (Czechoslovakia)

    1978-07-01

    Proton NMR spectroscopy was used for the evaluation of 10% coal extract solutions in deuterated pyridine. Four types of Czechoslovak coal were analyzed. Agreement was found between the aromaticity of coal extracts calculated from /sup 1/H NMR data using Brown's method and Ladner's and Williams' method and the characterization of an average molecule of the coal extract by the number of non-bridge carbon atoms of aromatic rings, by the overall number of aromatic ring carbon atoms and the number of aromatic rings, determined by the Williams and Ferris methods. The methods for calculating carbon distribution from /sup 1/H NMR data, however, contain some constants theoretically estimated or experimentally found using the method which still remain to be verified.

  7. Indium recovery by solvent extraction

    International Nuclear Information System (INIS)

    Fortes, Marilia Camargos Botelho

    1999-04-01

    Indium has been recovered as a byproduct from residues generated from the sulfuric acid leaching circuits in mineral plants for zinc recovery. Once its recovery comes from the slags of other metals recovery, it is necessary to separate it from the other elements which usually are present in high concentrations. Many works have been approaching this separation and indicate the solvent extraction process as the main technique used. In Brazilian case, indium recovery depends on the knowledge of this technique and its development. This paper describes the solvent extraction knowledge for the indium recovery from aqueous solutions generated in mineral plants. The results for determination of the best experimental conditions to obtain a high indium concentration solution and minimum iron poisoning by solvent extraction with di (2-ethylhexyl)-phosphoric acid (D2EHPA) solubilized in isoparafin and exxsol has been presented. (author)

  8. Salt effects in electromembrane extraction

    DEFF Research Database (Denmark)

    Seip, Knut Fredrik; Jensen, Henrik; Kieu, Thanh Elisabeth

    2014-01-01

    Electromembrane extraction (EME) was performed on samples containing substantial amounts of NaCl to investigate how the presence of salts affected the recovery, repeatability, and membrane current in the extraction system. A group of 17 non-polar basic drugs with various physical chemical...... this loss and the physical chemical properties of these substances was seen. The recovery loss was hypothesized to be caused by ion pairing in the SLM, and a mathematical model for the extraction recovery in the presence of salts was made according to the experimental observations. Some variations...... to the EME system reduced this recovery loss, such as changing the SLM solvent from NPOE to 6-undecanone, or by using a different EME setup with more favorable volume ratios. This was in line with the ion pairing hypothesis and the mathematical model. This thorough investigation of how salts affect EME...

  9. Surface-bound phosphatase activity in living hyphae of ectomycorrhizal fungi of Nothofagus obliqua.

    Science.gov (United States)

    Alvarez, Maricel; Godoy, Roberto; Heyser, Wolfgang; Härtel, Steffen

    2004-01-01

    We determined the location and the activity of surface-bound phosphomonoesterase (SBP) of five ectomycorrhizal (EM) fungi of Nothofagus oblique. EM fungal mycelium of Paxillus involutus, Austropaxillus boletinoides, Descolea antartica, Cenococcum geophilum and Pisolithus tinctorius was grown in media with varying concentrations of dissolved phosphorus. SBP activity was detected at different pH values (3-7) under each growth regimen. SBP activity was assessed using a colorimetric method based on the hydrolysis of p-nitrophenyl phosphate (pNPP) to p-nitrophenol phosphate (pNP) + P. A new technique involving confocal laser-scanning microscopy (LSM) was used to locate and quantify SBP activity on the hyphal surface. EM fungi showed two fundamentally different patterns of SBP activity in relation to varying environmental conditions (P-concentrations and pH). In the cases of D. antartica, A. boletinoides and C. geophilum, changes in SBP activity were induced primarily by changes in the number of SBP-active centers on the hyphae. In the cases of P. tinctorius and P. involutus, the number of SBP-active centers per μm hyphal length changed much less than the intensity of the SBP-active centers on the hyphae. Our findings not only contribute to the discussion about the role of SBP-active centers in EM fungi but also introduce LSM as a valuable method for studying EM fungi.

  10. Solvent extraction: the coordination chemistry behind extractive metallurgy.

    Science.gov (United States)

    Wilson, A Matthew; Bailey, Phillip J; Tasker, Peter A; Turkington, Jennifer R; Grant, Richard A; Love, Jason B

    2014-01-07

    The modes of action of the commercial solvent extractants used in extractive hydrometallurgy are classified according to whether the recovery process involves the transport of metal cations, M(n+), metalate anions, MXx(n-), or metal salts, MXx into a water-immiscible solvent. Well-established principles of coordination chemistry provide an explanation for the remarkable strengths and selectivities shown by most of these extractants. Reagents which achieve high selectivity when transporting metal cations or metal salts into a water-immiscible solvent usually operate in the inner coordination sphere of the metal and provide donor atom types or dispositions which favour the formation of particularly stable neutral complexes that have high solubility in the hydrocarbons commonly used in recovery processes. In the extraction of metalates, the structures of the neutral assemblies formed in the water-immiscible phase are usually not well defined and the cationic reagents can be assumed to operate in the outer coordination spheres. The formation of secondary bonds in the outer sphere using, for example, electrostatic or H-bonding interactions are favoured by the low polarity of the water-immiscible solvents.

  11. Ocean Thermal Extractable Energy Visualization

    Energy Technology Data Exchange (ETDEWEB)

    Ascari, Matthew [Lockheed Martin Corporation, Bethesda, MD (United States)

    2012-10-28

    The Ocean Thermal Extractable Energy Visualization (OTEEV) project focuses on assessing the Maximum Practicably Extractable Energy (MPEE) from the world’s ocean thermal resources. MPEE is defined as being sustainable and technically feasible, given today’s state-of-the-art ocean energy technology. Under this project the OTEEV team developed a comprehensive Geospatial Information System (GIS) dataset and software tool, and used the tool to provide a meaningful assessment of MPEE from the global and domestic U.S. ocean thermal resources.

  12. Photochemical separation and extraction device

    International Nuclear Information System (INIS)

    Wada, Yukio; Morimoto, Kyoichi.

    1998-01-01

    The present invention concerns a device for separating neptunium and plutonium from highly radioactive liquid wastes, in which valance control by irradiation of UV rays and extraction operation by using an organic solvent can be conducted simultaneously in the same reaction vessel. Namely, a step of irradiating UV rays to the liquid in the reaction vessel to control the valence of predetermined materials and a step of separating the materials by conducting solvent-extraction while stirring with a solvent are conducted simultaneously or successively. Then, facilities for the separation method can be reduced and the operation steps can be simplified. (N.H.)

  13. 11. Russian Conference on Extraction. Abstracts

    International Nuclear Information System (INIS)

    Zolotov, Yu.A.

    1998-01-01

    Results of fundamental and applied investigations in the region of chemistry of extraction, technology and analytical chemistry are presented. Modern state of theoretical and experimental investigations in the region of thermodynamics and kinetics of extraction by organic phosphorus compounds, organic nitrogen compounds and their mixtures are described. Date on mass exchange, extraction process simulation, extraction apparatuses are given

  14. Extraction of copper zinc and iron from hydrochloric acid solutions by means of different extractants

    Energy Technology Data Exchange (ETDEWEB)

    Zhivkova, Svetlana [Institute of Chemical Engineering - Bulgarian Academy of Sciences, Sofia (Bulgaria)

    2011-07-01

    The extraction of copper, zinc and iron from hydrochloric acid solutions has been studied. The experiments have been carried out using various solvents, involving different extraction mechanisms – solvating, anion-exchange, cation-exchange, bifunctional . Mixtures of these extractants have been also used. The extraction properties of these extractant mixtures toward copper, zinc and iron, the effect of used modifiers and diluents have been also investigated. Key words: Copper, Zinc, Iron, Extraction, Extractant, Modifier, Diluent.

  15. Noble metal extraction and sorption concentrating

    International Nuclear Information System (INIS)

    Petrukhin, O.M.; Malofeeva, G.I.

    1985-01-01

    Works performed in the USSR Academy of Sciences GEOCHI laboratory of extraction methods and devoted to selectivity problems of extraction and sorption methods of platinum metal, cadmium and indium concentrating in analytical chemistry are discussed. On choosing complexino. reagent main attention is paid to the selectivity variation based on different stability of metal complexes. Platinum metals are extracted in the form of ion associates when usinq hard, mainly oxyqen-containing, extractants. Coordination-solvated metal complexes are extracted white usinq extractants containing sulfur, trivalent phosphorus and aromatic nitroqen as donor anions. Selectivity is maximum for sulfur- and nitroren-containinq extractants and sorbents. In case of the group extraction of platinum metals sorption is preferable and in case of selective extraction of individual metals, especially, in case of need of relative concentratinq extraction is preferable

  16. Uranium extraction from underground deposits

    International Nuclear Information System (INIS)

    Wolfe, C.R.

    1982-01-01

    Uranium is extracted from underground deposits by passing an aqueous oxidizing solution of carbon dioxide over the ore in the presence of calcium ions. Complex uranium carbonate or bicarbonate ions are formed which enter the solution. The solution is forced to the surface and the uranium removed from it

  17. Feature extraction using fractal codes

    NARCIS (Netherlands)

    B.A.M. Ben Schouten; Paul M. de Zeeuw

    1999-01-01

    Fast and successful searching for an object in a multimedia database is a highly desirable functionality. Several approaches to content based retrieval for multimedia databases can be found in the literature [9,10,12,14,17]. The approach we consider is feature extraction. A feature can be seen as a

  18. Feature Extraction Using Fractal Codes

    NARCIS (Netherlands)

    B.A.M. Schouten (Ben); P.M. de Zeeuw (Paul)

    1999-01-01

    htmlabstractFast and successful searching for an object in a multimedia database is a highly desirable functionality. Several approaches to content based retrieval for multimedia databases can be found in the literature [9,10,12,14,17]. The approach we consider is feature extraction. A feature can

  19. Extraction of Proteins with ABS

    NARCIS (Netherlands)

    Desai, R.K.; Streefland, M.; Wijffels, R.H.; Eppink, M.H.M.

    2016-01-01

    Over the past years, there has been an increasing trend in research on the extraction and purification of proteins using aqueous biphasic systems (ABS) formed by polymers, e.g., polyethylene glycol (PEG). In general, when dealing with protein purification processes, it is essential to maintain their

  20. Extractive Summarisation of Medical Documents

    Directory of Open Access Journals (Sweden)

    Abeed Sarker

    2012-09-01

    Full Text Available Background Evidence Based Medicine (EBM practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medical documents. MethodWe use a corpus that is specifically designed for summarisation in the EBM domain. We use approximately half the corpus for deriving important statistics associated with the best possible extractive summaries. We take into account factors such as sentence position, length, sentence content, and the type of the query posed. Using the statistics from the first set, we evaluate our approach on a separate set. Evaluation of the qualities of the generated summaries is performed automatically using ROUGE, which is a popular tool for evaluating automatic summaries. Results Our summarisation approach outperforms all baselines (best baseline score: 0.1594; our score 0.1653. Further improvements are achieved when query types are taken into account. Conclusion The quality of extractive summarisation in the medical domain can be significantly improved by incorporating domain knowledge and statistics derived from a specialised corpus. Such techniques can therefore be applied for content selection in end-to-end summarisation systems.

  1. DNA Extraction and Primer Selection

    DEFF Research Database (Denmark)

    Karst, Søren Michael; Nielsen, Per Halkjær; Albertsen, Mads

    Talk regarding pitfalls in DNA extraction and 16S amplicon primer choice when performing community analysis of complex microbial communities. The talk was a part of Workshop 2 "Principles, Potential, and Limitations of Novel Molecular Methods in Water Engineering; from Amplicon Sequencing to -omics...

  2. Butterfly extracts show antibacterial activity

    Science.gov (United States)

    Extracts of several British butterfly species were tested and shown to possess powerful bactericidal activity against the gram-positive bacteria Staphylococcus aureus (S. aureus). The active compounds were identified as hydroxylated pyrrolizidine alkaloids (PAs) related to loline with nitrogen at C-...

  3. Development of new natural extracts.

    Science.gov (United States)

    Lavoine-Hanneguelle, Sophie; Périchet, Christine; Schnaebele, Nicolas; Humbert, Marina

    2014-11-01

    For over the past 20 years, a remarkable development in the study and search of natural products has been observed. This is linked to a new market trend towards ecology and also due to new regulations. This could be a rupture, but also a real booster for creativity. Usually, in the flavor and fragrance field, creativity was boosted by the arrival of new synthetic molecules. Naturals remained the traditional, century-old products, protected by secrecy and specific know-how from each company. Regulatory restrictions or eco-friendly certification constraints like hexane-free processes triggered an important brainstorming in the industry. As a result, we developed new eco-friendly processes including supercritical CO2 extraction, allowing fresh plants to be used to obtain industrial flower extracts (Jasmine Grandiflorum, Jasmine Sambac, Orange blossom). These extracts are analyzed by GC, GC/MS, GCO, and HPTLC techniques. New or unusual raw materials can also be explored, but the resulting extracts have to be tested for safety reasons. Some examples are described. Copyright © 2014 Verlag Helvetica Chimica Acta AG, Zürich.

  4. Repeated extraction of DNA from FTA cards

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Ferrero, Laura; Børsting, Claus

    2011-01-01

    Extraction of DNA using magnetic bead based techniques on automated DNA extraction instruments provides a fast, reliable and reproducible method for DNA extraction from various matrices. However, the yield of extracted DNA from FTA-cards is typically low. Here, we demonstrate that it is possible...... to repeatedly extract DNA from the processed FTA-disk. The method increases the yield from the nanogram range to the microgram range....

  5. Supercritical fluid extraction behaviour of polymer matrices

    International Nuclear Information System (INIS)

    Sujatha, K.; Kumar, R.; Sivaraman, N.; Srinivasan, T.G.; Vasudeva Rao, P.R.

    2007-01-01

    Organic compounds present in polymeric matrices such as neoprene, surgical gloves and PVC were co-extracted during the removal of uranium using supercritical fluid extraction (SFE) technique. Hence SFE studies of these matrices were carried out to establish the extracted species using HPLC, IR and mass spectrometry techniques. The initial study indicated that uranium present in the extract could be purified from the co-extracted organic species. (author)

  6. Chromatographic analysis of wheatgrass extracts

    Directory of Open Access Journals (Sweden)

    Masood Shah Khan

    2015-01-01

    Full Text Available Aim: Wheatgrass (WG is the shoot of Triticum aestivum Linn. belongs to the family Gramineae, and possess high chlorophyll content and essential vitamins, minerals, vital enzymes, amino acids, dietary fibers etc., It has been shown to possess anti-cancer, anti-ulcer, antioxidant, and anti-arthritic activity due to the presence of biologically active compounds, and minerals. Therefore, in the present study, high-performance thin layer chromatography (HPTLC, and high-performance liquid chromatography (HPLC methods for qualitative and quantitative analysis have been proposed, which will help in quality evaluation of wheat grass extract. Materials and Methods: Samples for analysis were prepared in methanol and water simply by sonication. These were applied on pre-coated silica plate and chromatograms were developed using toluene: Ethyl acetate: Formic acid. HPLC analysis was done on Waters HPLC system using water, methanol, and acetonitrile as mobile phase. Merck C18 column has been used. Results: HPTLC finger printing of alcoholic extracts of WG was carried out and found 10–11 spots at different wavelengths 254, 366, and 435 nm. HPLC fingerprinting produced 22 peaks at 256 nm. Quantitative HPTLC analysis was done to determine the gallic acid content, and was found to be 0.077% w/w in aqueous extract. By HPLC, the content of gallic acid and rutin was found to be 0.07%, and 0.04% w/w in aqueous extract of WG. Conclusion: The developed HPLC and HPTLC fingerprinting method can be used for the quality control, and standardization of WG and its extracts used as nutritional supplement.

  7. Solvent extraction of aurocyanide by extractant CTMAB and TBP

    International Nuclear Information System (INIS)

    Yan Wenfei; Zhang Tianxi; Wu Jinguang

    2000-01-01

    A novel extraction system using KAu(CN) 2 -CTMAB as aqueous phase and 30% TBP-dodecane as organic phase is studied by 198 Au radioactive tracer and FT-IR spectroscopy. The results show that the organic phase separates into two phases, when the gold concentration is bigger than 20 g/L. From the analysis of FT-IR it is seen that the most of gold is in the lower organic phase

  8. Recent trends in metals extraction

    Directory of Open Access Journals (Sweden)

    Regel-Rosocka, M.

    2013-08-01

    Full Text Available After near 70 years of practical usage, solvent extraction is a perfectly mastered technique of separation, widely used on an industrial scale for the separation of metals mainly from raw materials. However, currently, in the era of depleting natural resources and increasingly less accessible deposits, environmental restrictions, etc., an increasing interest, both from social and economical constrains, is being directed at the extraction of metals from the secondary sources (such as batteries, electronic scrap. In many cases, solvent extraction, due to its operational characteristics, can be considered as the Best Available Technology for the purpose of separating multielemental metal solutions. This paper provides a brief overview of past achievements and present scenario of solvent extraction investigations and developments, describing some recently commissioned solvent extraction plants, whereas the Skorpion Zinc plant (Namibia for zinc extraction from raw materials and caesium removal from radioactive High Level Wastes (HLWs are told over in detail as case studies. The paper also presents some proposals for the use of liquid-liquid extraction to separate metal ions from secondary sources (e.g. cobalt from industrial waste streams. The review highlights the emerging use of ionic liquids as new extractants for metals, providing an insight into this exciting research field. Despite its detractors, solvent extraction has entered in force into XXI century as a leading separation technology for metals.Después de casi 70 años de uso práctico, la extracción líquido-líquido o extracción con disolventes es una técnica de separación muy evolucionada, utilizándose a escala industrial en el beneficio de metales obtenidos de diversas materias primas. Sin embargo, con el agotamiento de los recursos naturales y el aumento de depósitos minerales de más difícil acceso, restricciones medio ambientales, etc., ha aumentado el interés, tanto desde

  9. A comparative study of Averrhoabilimbi extraction method

    Science.gov (United States)

    Zulhaimi, H. I.; Rosli, I. R.; Kasim, K. F.; Akmal, H. Muhammad; Nuradibah, M. A.; Sam, S. T.

    2017-09-01

    In recent year, bioactive compound in plant has become a limelight in the food and pharmaceutical market, leading to research interest to implement effective technologies for extracting bioactive substance. Therefore, this study is focusing on extraction of Averrhoabilimbi by different extraction technique namely, maceration and ultrasound-assisted extraction. Fewplant partsof Averrhoabilimbiweretaken as extraction samples which are fruits, leaves and twig. Different solvents such as methanol, ethanol and distilled water were utilized in the process. Fruit extractsresult in highest extraction yield compared to other plant parts. Ethanol and distilled water have significant role compared to methanol in all parts and both extraction technique. The result also shows that ultrasound-assisted extraction gave comparable result with maceration. Besides, the shorter period on extraction process gives useful in term of implementation to industries.

  10. Extracting messages masked by chaos

    International Nuclear Information System (INIS)

    Perez, G.; Cerdeira, H.A.

    1995-01-01

    We show how to extract messages that are masked by a chaotic signal in a system of two Lorenz oscillators. This mask removal is done for two different modes of transmission, a digital one where a parameter of the sender is switched between two values, and an analog mode, where a small amplitude message is added to the carrier signal. We achieve this without using a second Lorenz oscillator as receiver, and without doing a full reconstruction of the dynamics. This method is robust with respect to transformations that impede the unmasking using a Lorenz receiver, and is not affected by the broad-band noise that is inherent to the synchronization process. We also discuss the limitations of this way of extraction for messages in high frequency bands. (author). 12 refs, 4 figs

  11. The extraction neptunium by trilaurylamine

    International Nuclear Information System (INIS)

    Champion, J.; Chesne, A.

    1964-01-01

    The extraction by trilaurylamine of neptunium (IV) from nitric acid and sulfuric acid-nitric acid media has been studied with the aim of developing a purification process for this element. Relative to the plutonium-neptunium separation, conditions are given for the oxidation of neptunium (IV) in sulfuric acid-nitric acid medium and data are presented on the stabilisation of the + 4 oxidation state by the organic solvent. Two procedures have been developed for the simultaneous purification of the two actinides. Both are based on the trilaurylamine extraction of the tetravalent nitrate species. The first utilises a constant redox potential fixed by Fe +++ /Fe ++ couple, while in the second, valencies are determined by successive addition of nitrite and ferrous ions. Gram quantities of neptunium 237 has been recovered from plutonium process solution. Alternate procedures are suggested for the chemical processing of irradiated Np 237 . (authors) [fr

  12. Amine synergism in uranium extraction

    International Nuclear Information System (INIS)

    Rinelli, G.; Abbruzzese, C.

    1977-01-01

    Commercial products based on C 8 to C 12 tertiary amine mixtures are now widely used in the solvent extraction of uranium from sulphuric pregnant solutions. The satisfactory results generally obtained have never required an analysis of the synergistic effects of amine combinations similar to that carried out for the organo-phosphorus compounds. In the research described the increase in the extraction power of an organic phase composed of an amine binary mixture was studied with regard to an aqueous solution from the sulphuric acid treatment of uranium ore. On the basis of the experimental results obtained, it is possible to select the best composition of the amine mixture to ensure a percentage increase in uranium recovery. Bearing in mind the tendency for the yellow-cake price to rise, the study is considered to be a useful contribution in the context of commercial products currently available on the market. (author)

  13. Biopolymer chitin: extraction and characterization

    International Nuclear Information System (INIS)

    Andrade, Sania M.B. de; Ladchumananandasivam, Rasiah

    2011-01-01

    The biopolymers are materials made from renewable sources such as soybean, corn, cane sugar, cellulose and chitin. Chitin is the most abundant biopolymer found in nature, after cellulose. The chemical structure of chitin is distinguished by the hydroxyl group, of structure from cellulose, located at position C-2, which in the chitin is replaced by acetamine group. The objective of this study was to develop the chitin from exoskeletons of Litopenaeus vannamei shrimp, which are discarded as waste, causing pollutions, environmental problems and thus obtain better utilization of these raw materials. It also, show the extraction process and deacetylation of chitosan. The extraction of chitin followed steps of demineralization, desproteinization and deodorization. Chitin and chitosan were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and the thermals properties were analyzed by thermogravimetry (TG/DTG). (author)

  14. Determination of the coefficient of friction between steel bristles of gutter brushes for road sweeping

    OpenAIRE

    Abdel Wahab, Magd M.; Arroyave L., Juan Felipe; Vanegas Useche, Libardo

    2008-01-01

    El objetivo de este artículo es determinar los coeficientes de fricción entre dos cerdas delgadas de acero de los cepillos laterales en barredoras de calles. Dichos coeficientes se determinan experimentalmente utilizando diferentes pesos sobre las cerdas en un plano inclinado. Los resultados indican que el coeficiente de fricción depende de la fuerza normal. Cuando ésta es pequeña, los coeficientes de fricción son grandes. Al incrementar la fuerza normal, los coeficientes de fricción se red...

  15. Extractive metallurgy of the beryllium

    International Nuclear Information System (INIS)

    Alonso, Neusa; Capocchi, Jose Deodoro Trani

    1995-01-01

    A bibliographic review is performed on the beryllium extractive metallurgy. The work describes the main type of ores and processes applied to the metallic beryllium production, beryllium oxide production using fluoride, sulfide and direct chlorination. The thermodynamic consideration are made on beryllium reduction processes, discussing the viability of the beryllium oxide and hallide reduction processes. Under the technological viewpoint, the Cu-Be alloys main production processes are discussed, and the main toxicity problems related with beryllium are mentioned

  16. Metals extraction from sea water

    International Nuclear Information System (INIS)

    Chryssostomidis, C.; Larue, G.J.; Morgan, D.T.

    1981-01-01

    A method and system for continuously extracting metals from sea water by deploying adsorber sheets in a suitable current of sea water, recovering the adsorber sheets after they become loaded with metal and eluting the metal from the recovered sheets. The system involves the use of hollow, perforated bobbins on which the sheets are rolled as they are recovered and through which elutant is introduced

  17. Electrostatic septa for SPS extraction

    CERN Multimedia

    1975-01-01

    The extraction system for the N-Area is located in LSS2 (another one for the W-Area, now abandoned, was in LSS6). The electrostatic septum consists of 4 parts, each 3 m long. It is made of W-wires, 0.12 mm thick. The nominal electric field is 100 kV/cm. See also Annual Report 1975, p.175.

  18. Extraction of sulfuric acid with TOPO

    International Nuclear Information System (INIS)

    Shuyun, Xue; Yonghui, Yang; Yanzhao, Yang; Sixiu, Sun; Borong, Bao

    1998-01-01

    A study on solvent extraction of sulfuric acid by tri-octylphosphine oxide (TOPO) in n-heptane has been made. Extraction coefficients of H 2 SO 4 as a function of H 2 SO 4 concentration in aqueous phase, and extractant concentrations in organic phase have been studied. The composition of extracted species, equilibrium constants of extraction reaction have been evaluated. These results are important for interpreting extraction equilibrium data of uranium(VI) or other metal ions with TOPO in sulfuric acid media. (author)

  19. Extraction of substances assisted by ultrasound (UAE)

    International Nuclear Information System (INIS)

    Azuola, Rocio; Vargas, Pedro

    2007-01-01

    Different compounds present in vegetables with functional or technological properties, have gained great importance in food, pharmaceutical and cosmetic markets. Efficient methods, economical and environment friendly are sought for the extraction of these substances. A literature review has been performanced of recent publications on different extraction methods and their comparison to the ultrasound assisted extraction (UAE) to assess their effectiveness and industrial viability. The ultrasound assisted extraction (UAE) has been found to be more efficient than traditional mining methods, and cheaper and easier than non-traditional extraction methods such as microwave-assisted extraction, so it checks its industrial viability. (author) [es

  20. Pressurized Hot Water Extraction of anthocyanins from red onion: A study on extraction and degradation rates

    Energy Technology Data Exchange (ETDEWEB)

    Petersson, Erik V.; Liu Jiayin; Sjoeberg, Per J.R.; Danielsson, Rolf [Uppsala University, Department of Physical and Analytical Chemistry, P.O. Box 599, SE-751 24, Uppsala (Sweden); Turner, Charlotta, E-mail: Charlotta.Turner@kemi.uu.se [Uppsala University, Department of Physical and Analytical Chemistry, P.O. Box 599, SE-751 24, Uppsala (Sweden)

    2010-03-17

    Pressurized Hot Water Extraction (PHWE) is a quick, efficient and environmentally friendly technique for extractions. However, when using PHWE to extract thermally unstable analytes, extraction and degradation effects occur at the same time, and thereby compete. At first, the extraction effect dominates, but degradation effects soon take over. In this paper, extraction and degradation rates of anthocyanins from red onion were studied with experiments in a static batch reactor at 110 deg. C. A total extraction curve was calculated with data from the actual extraction and degradation curves, showing that more anthocyanins, 21-36% depending on the species, could be extracted if no degradation occurred, but then longer extraction times would be required than those needed to reach the peak level in the apparent extraction curves. The results give information about the different kinetic processes competing during an extraction procedure.

  1. DNA extraction from herbarium specimens.

    Science.gov (United States)

    Drábková, Lenka Záveská

    2014-01-01

    With the expansion of molecular techniques, the historical collections have become widely used. Studying plant DNA using modern molecular techniques such as DNA sequencing plays an important role in understanding evolutionary relationships, identification through DNA barcoding, conservation status, and many other aspects of plant biology. Enormous herbarium collections are an important source of material especially for specimens from areas difficult to access or from taxa that are now extinct. The ability to utilize these specimens greatly enhances the research. However, the process of extracting DNA from herbarium specimens is often fraught with difficulty related to such variables as plant chemistry, drying method of the specimen, and chemical treatment of the specimen. Although many methods have been developed for extraction of DNA from herbarium specimens, the most frequently used are modified CTAB and DNeasy Plant Mini Kit protocols. Nine selected protocols in this chapter have been successfully used for high-quality DNA extraction from different kinds of plant herbarium tissues. These methods differ primarily with respect to their requirements for input material (from algae to vascular plants), type of the plant tissue (leaves with incrustations, sclerenchyma strands, mucilaginous tissues, needles, seeds), and further possible applications (PCR-based methods or microsatellites, AFLP).

  2. Sequence complexity and work extraction

    International Nuclear Information System (INIS)

    Merhav, Neri

    2015-01-01

    We consider a simplified version of a solvable model by Mandal and Jarzynski, which constructively demonstrates the interplay between work extraction and the increase of the Shannon entropy of an information reservoir which is in contact with a physical system. We extend Mandal and Jarzynski’s main findings in several directions: first, we allow sequences of correlated bits rather than just independent bits. Secondly, at least for the case of binary information, we show that, in fact, the Shannon entropy is only one measure of complexity of the information that must increase in order for work to be extracted. The extracted work can also be upper bounded in terms of the increase in other quantities that measure complexity, like the predictability of future bits from past ones. Third, we provide an extension to the case of non-binary information (i.e. a larger alphabet), and finally, we extend the scope to the case where the incoming bits (before the interaction) form an individual sequence, rather than a random one. In this case, the entropy before the interaction can be replaced by the Lempel–Ziv (LZ) complexity of the incoming sequence, a fact that gives rise to an entropic meaning of the LZ complexity, not only in information theory, but also in physics. (paper)

  3. Extractive reserves in Brazilian Amazonia

    Energy Technology Data Exchange (ETDEWEB)

    Fearnside, P.M (National Institute for Research in the Amazon, Manaus-Amazonas (Brazil))

    1989-06-01

    In 1985 an opportunity arose for maintaining tracts of Amazonian forest under sustainable use. Brazil's National Council of Rubber Tappers and the Rural Worker's Union proposed the creation of a set of reserves of a new type, called extractive reserves. The first six are being established in one of the Brazilian states most threatened by deforestatation. The creation of extractive reserves grants legal protection to forest land traditionally used by rubber tappers, Brazil-nut gatherers, and other extractivists. The term extrativismo (extractivism) in Brazil refers to removing nontimber forest products, such as latex, resins, and nuts, without felling the trees. Approximately 30 products are collected for commercial sale. Many more types of forest materials are gathered, for example as food and medicines, for the extractivists' own use. The reserve proposal is attractive for several reasons related to social problems. It allows the rubber tappers to continue their livelihood rather than be expelled by deforestation. However, it is unlikely that sufficient land will be set aside as extractive reserves to employ all the tappers. Displaced rubber tappers already swell the ranks of urban slum dwellers in Brazil's Amazonian cities, and they have become refugees to continue their profession in the forests of neighboring countries, such as Bolivia.

  4. Stability of extraction space closure.

    Science.gov (United States)

    Garib, Daniela Gamba; Bressane, Larissa Borges; Janson, Guilherme; Gribel, Bruno Frazão

    2016-01-01

    The objectives of this study were to evaluate the prevalence and long-term behavior of extraction space reopening in patients with Class I malocclusion and to identify some associated factors. A sample of 43 patients met the inclusion criteria. Dental casts at the onset of treatment, after treatment, and 1 and 5 years after debonding were used. Initial and final cephalometric radiographs were used to measure the amount of incisor retraction. Cochran tests were used to compare the numbers of open and closed extraction spaces after treatment and at 1 and 5 years after debonding (P space reopening with t tests. Of the sample, 30.23% had extraction space reopening. The frequency of open spaces significantly increased between the final and the 1-year posttreatment dental casts and decreased between the casts at 1 and 5 years posttreatment. Patients with space reopening had less initial anterior crowding and greater amounts of mandibular incisor retraction during treatment. There was a high prevalence of space reopening 1 year after treatment. However, these spaces tended to decrease by 5 years after treatment. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  5. Titanium metal: extraction to application

    Energy Technology Data Exchange (ETDEWEB)

    Gambogi, Joseph (USGS, Reston, VA); Gerdemann, Stephen J.

    2002-09-01

    In 1998, approximately 57,000 tons of titanium metal was consumed in the form of mill products (1). Only about 5% of the 4 million tons of titanium minerals consumed each year is used to produce titanium metal, with the remainder primarily used to produce titanium dioxide pigment. Titanium metal production is primarily based on the direct chlorination of rutile to produce titanium tetrachloride, which is then reduced to metal using the Kroll magnesium reduction process. The use of titanium is tied to its high strength-to-weight ratio and corrosion resistance. Aerospace is the largest application for titanium. In this paper, we discuss all aspects of the titanium industry from ore deposits through extraction to present and future applications. The methods of both primary (mining of ore, extraction, and purification) and secondary (forming and machining) operations will be analyzed. The chemical and physical properties of titanium metal will be briefly examined. Present and future applications for titanium will be discussed. Finally, the economics of titanium metal production also are analyzed as well as the advantages and disadvantages of various alternative extraction methods.

  6. Digital extraction of interference fringe contours

    International Nuclear Information System (INIS)

    Mastin, G.A.; Ghiglia, D.C.

    1985-01-01

    Two basic techniques for extracting interferogram contours have been discussed. The first is a global contour extracton technique based on the fast Fourier transform. The second extracts individual contours with a thinning algorithm using logical neighborhood transformations

  7. CANINE ECTOPIC TREATMENT WITH FIRST MOLAR EXTRACTION

    Directory of Open Access Journals (Sweden)

    Angelica Margo

    2015-06-01

    Full Text Available Decision to extract or not and the type of tooth must be analyzed carefully in orthodontic treatment. Preferable tooth to be extracted was the tooth with large caries or restoration. Usually the type of tooth to be extracted was second molar (if the third molar appears, incisor, first molar, and combination of several teeth. Orthodontic treatment with molar extraction is more difficult to treat and the result is usually compromise. There are several considerations in extracting first molar such as tooth with large caries or restoration, hypoplasia, periapical disease, large discrepancy, high maxilla-mandibular plane angle, and cases with anterior open bite. Nowadays, orthodontic cases with molar extraction do not prolong the treatment time compared to premolar extraction case, but the anchorage system must be considered carefully. The present case was treated with extraction of first molar to solve anterior crowding with maximum anchorage at the upper jaw and using Nance Holding Appliance.

  8. Portulaca oleracea Linn seed extract ameliorates hydrogen ...

    African Journals Online (AJOL)

    Portulaca oleracea Linn seed extract ameliorates hydrogen ... induced cell death by inhibiting oxidative stress and ROS generation. Keywords: ... culture medium; therefore the stock solutions of ... acetic acid (1 %) and ethanol (50 %) to extract.

  9. EVALUATION OF EXTRACTS FROM Tapinanthus dodone ...

    African Journals Online (AJOL)

    userpc

    flavonoids, tannins, saponins, glycosides ethanolic leaf extract from ... of Chemistry, Kano University of Science and Technology, Wudil. P.M.B. 3244, Kano ... ethanolic leaf extract from Tapinanthus dodoneifolius grown ee. Results obtained for ...

  10. Inflation of Unreefed and Reefed Extraction Parachutes

    Science.gov (United States)

    Ray, Eric S.; Varela, Jose G.

    2015-01-01

    Data from the Orion and several other test programs have been used to reconstruct inflation parameters for 28 ft Do extraction parachutes as well as the parent aircraft pitch response during extraction. The inflation force generated by extraction parachutes is recorded directly during tow tests but is usually inferred from the payload accelerometer during Low Velocity Airdrop Delivery (LVAD) flight test extractions. Inflation parameters are dependent on the type of parent aircraft, number of canopies, and standard vs. high altitude extraction conditions. For standard altitudes, single canopy inflations are modeled as infinite mass, but the non-symmetric inflations in a cluster are modeled as finite mass. High altitude extractions have necessitated reefing the extraction parachutes, which are best modeled as infinite mass for those conditions. Distributions of aircraft pitch profiles and inflation parameters have been generated for use in Monte Carlo simulations of payload extractions.

  11. Transductive Pattern Learning for Information Extraction

    National Research Council Canada - National Science Library

    McLernon, Brian; Kushmerick, Nicholas

    2006-01-01

    .... We present TPLEX, a semi-supervised learning algorithm for information extraction that can acquire extraction patterns from a small amount of labelled text in conjunction with a large amount of unlabelled text...

  12. Uranium extraction from gold-uranium ores

    Energy Technology Data Exchange (ETDEWEB)

    Laskorin, B.N.; Golynko, Z.Sh.

    1981-01-01

    The process of uranium extraction from gold-uranium ores in the South Africa is considered. Flowsheets of reprocessing gold-uranium conglomerates, pile processing and uranium extraction from the ores are presented. Continuous counter flow ion-exchange process of uranium extraction using strong-active or weak-active resins is noted to be the most perspective and economical one. The ion-exchange uranium separation with the succeeding extraction is also the perspective one.

  13. Solvent extraction studies of RERTR silicide fuels

    International Nuclear Information System (INIS)

    Gouge, Anthony P.

    1983-01-01

    Uranium silicide fuels, which are candidate RERTR fuel compositions, may require special considerations in solvent extraction reprocessing. Since Savannah River Plant may be reprocessing RERTR fuels as early as 1985, studies have been conducted at Savannah River Laboratory to demonstrate the solvent extraction behavior of this fuel. Results of solvent extraction studies with both unirradiated and irradiated fuel are presented along with the preliminary RERTR solvent extraction reprocessing flow sheet for Savannah River Plant. (author)

  14. Equipment for extracting and conveying stratified minerals

    Energy Technology Data Exchange (ETDEWEB)

    Blumenthal, G.; Kunzer, H.; Plaga, K.

    1991-08-14

    This invention relates to equipment for extracting stratified minerals and conveying the said minerals along the working face, comprising a trough shaped conveyor run assembled from lengths, a troughed extraction run in lengths matching the lengths of conveyor troughing, which is linked to the top edge of the working face side of the conveyor troughing with freedom to swivel vertically, and a positively guided chain carrying extraction tools and scrapers along the conveyor and extraction runs.

  15. Accelerated Solvent Extraction: An Innovative Sample Extraction Technique for Natural Products

    International Nuclear Information System (INIS)

    Hazlina Ahmad Hassali; Azfar Hanif Abd Aziz; Rosniza Razali

    2015-01-01

    Accelerated solvent extraction (ASE) is one of the novel techniques that have been developed for the extraction of phytochemicals from plants in order to shorten the extraction time, decrease the solvent consumption, increase the extraction yield and enhance the quality of extracts. This technique combines elevated temperatures and pressure with liquid solvents. This paper gives a brief overview of accelerated solvent extraction technique for sample preparation and its application to the extraction of natural products. Through practical examples, the effects of operational parameters such as temperature, volume of solvent used, extraction time and extraction yields on the performance of ASE are discussed. It is demonstrated that ASE technique allows reduced solvent consumption and shorter extraction time, while the extraction yields are even higher than those obtained with conventional methods. (author)

  16. Extraction chromatogrpahy of actinides, ch. 7

    International Nuclear Information System (INIS)

    Mueller, W.

    1975-01-01

    This review on extraction chromatography of actinides emphasizes the important usage of neutral (Tributylphosphate), basic (substituted ammonium salts), and acidic (HDEHP) extractants, and their application to separations of actinides in the di-to hexavalent oxidation state. Furthermore, the actinide extraction by ketones, ethers, alcohols and β-diketones is discussed

  17. Surfactant enhanced non-classical extraction

    International Nuclear Information System (INIS)

    Szymanowski, J.

    2000-01-01

    Surfactant enhanced non-classical extractions are presented and discussed. They include micellar enhanced ultrafiltration and cloud point extraction. The ideas of the processes are given and the main features are presented. They are compared to the classical solvent extraction. The fundamental of micellar solutions and their solubilisation abilities are also discussed. (author)

  18. COMPARISONS OF SOXHLET EXTRACTION, PRESSURIZED LIQUID EXTRACTION, SUPERCRITICAL FLUID EXTRACTION, AND SUBCRITICAL WATER EXTRACTION FOR ENVIRONMENTAL SOLIDS: RECOVERY, SELECTIVITY, AND EFFECTS ON SAMPLE MATRIX. (R825394)

    Science.gov (United States)

    Extractions of a polycyclic aromatic hydrocarbon (PAH)-contaminated soil from a former manufactured gas plant site were performed with a Soxhlet apparatus (18 h), by pressurized liquid extraction (PLE) (50 min at 100°C), supercritical fluid extraction (SFE) (1 h at 150°...

  19. Determining efficient extraction procedure of phytochemicals from ...

    African Journals Online (AJOL)

    Determining efficient extraction procedure of phytochemicals from the fruit paste of Ziziphus abyssinica and Tamarindus indica . ... Methodology and results: The methods used included cold and soxhlet extraction using methanol as the solvent and hot extraction using distilled water. To determine the efficiency in which ...

  20. Surfactant enhanced non-classical extraction

    International Nuclear Information System (INIS)

    Szymanowski, J.

    1999-01-01

    Surfactant enhanced non-classical extractions are presented and discussed. They include micellar enhanced ultrafiltration and cloud point extraction. The ideas of the processes are given and the main features are presented. They are compared to the classical solvent extraction. The fundamental of micellar solutions and their solubilization abilities are also discussed. (author)

  1. Organization of extracting molecules of the diamide type: link with the extracting properties?

    International Nuclear Information System (INIS)

    Meridiano, Y.

    2009-02-01

    The aim of these studies is to establish a link between the different organizations of diamide extractants (used in the DIAMEX process) and their extracting properties. The effects of the key parameters leading the liquid-liquid extraction (concentration of extractant, nature of solute, activity of the aqueous phase, nature of the diluent and temperature) are studied: 1) at the supramolecular scale, with the characterization of the extractant organizations by vapor-pressure osmometry (VPO) and small angle neutron and X-ray scattering (SANS/SAXS) experiments; 2) at the molecular scale, with the quantification of the extracted solutes (water, nitric acid, metal nitrate) and the determination of extracted complexes stoichiometries by electro-spray mass spectrometry (ESI-MS) experiments. The DMDOHEMA molecule acts as a classical surfactant and forms aggregates of the reverse micelle type. Taking into account the established supramolecular diagrams, a quantitative link between the extractants structures and their extracting properties has been brought to light. To model the europium nitrate extraction, two approaches have been developed: - an approach based on mass action laws. Extractions equilibria have been proposed taking into account the supramolecular speciation; - an innovative approach considering the extracted ions as adsorbed on a specific surface of the extractant molecule which depends on the extractant organization state. The ion extraction can be considered as a sum of isotherms corresponding to the different states of organization. This approach allows to compare the extraction efficiency of an extracting molecule as a function of its organization state. (author)

  2. Hybrid Model of Content Extraction

    DEFF Research Database (Denmark)

    Qureshi, Pir Abdul Rasool; Memon, Nasrullah

    2012-01-01

    We present a hybrid model for content extraction from HTML documents. The model operates on Document Object Model (DOM) tree of the corresponding HTML document. It evaluates each tree node and associated statistical features like link density and text distribution across the node to predict...... significance of the node towards overall content provided by the document. Once significance of the nodes is determined, the formatting characteristics like fonts, styles and the position of the nodes are evaluated to identify the nodes with similar formatting as compared to the significant nodes. The proposed...

  3. The extractive metallurgy of gold

    Energy Technology Data Exchange (ETDEWEB)

    Kongolo, K.; Mwema, M.D. [University of Lubumbashi, Zaire, Gecamines Metallurgical Research Centre, Likasi, Zaire, c/o Gecamines Brussels (Belgium)

    1998-12-15

    Moessbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Moessbauer spectroscopy could be applied.

  4. PSR extraction kicker system improvements

    International Nuclear Information System (INIS)

    Hardek, T.W.

    1991-01-01

    A program to improve the reliability of hardware required to operate the Los Alamos Proton Storage Ring has been under way for the past three years. The extraction kicker system for the PSR was identified as one candidate for improvement. Pulse modulators produce 50kV pulses 360 nsec in length at up to 24-Hz pulse repetition rate and drive two 4-meter-long stripline electrodes. Sources of difficulty with this system included short width switch tube lifetime, drive cable electrical breakdown, high-voltage connector failure, and occasional electrode breakdown. This paper discusses modifications completed on this system to correct these difficulties. 2 refs., 3 figs

  5. The extractive metallurgy of gold

    Science.gov (United States)

    Kongolo, K.; Mwema, M. D.

    1998-12-01

    Mössbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Mössbauer spectroscopy could be applied.

  6. The extractive metallurgy of gold

    International Nuclear Information System (INIS)

    Kongolo, K.; Mwema, M.D.

    1998-01-01

    Moessbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Moessbauer spectroscopy could be applied

  7. Keyword extraction by nonextensivity measure.

    Science.gov (United States)

    Mehri, Ali; Darooneh, Amir H

    2011-05-01

    The presence of a long-range correlation in the spatial distribution of a relevant word type, in spite of random occurrences of an irrelevant word type, is an important feature of human-written texts. We classify the correlation between the occurrences of words by nonextensive statistical mechanics for the word-ranking process. In particular, we look at the nonextensivity parameter as an alternative metric to measure the spatial correlation in the text, from which the words may be ranked in terms of this measure. Finally, we compare different methods for keyword extraction. © 2011 American Physical Society

  8. Primary metals extraction by liquid membranes

    International Nuclear Information System (INIS)

    Subramanian, K.N.

    1980-01-01

    The extraction of copper and uranium by liquid membranes is presented. The recovery of uranium from wet process phosphoric acid is described. The development of this process has progressed through three stages, firstly the chemistry of uranium extraction as it pertains to liquid membrane systems. This was followed by continuous extraction tests on fresh black acid and on aged acid. Results on a 1 litre/minute pilot plant demonstrated that the process could be operated with a minimum of feed pretreatment and about 90% of uranium could be extracted. The extraction of copper from copper leach liquors is also described. (U.K.)

  9. Extraction of uranyl sulfate with primary amine

    International Nuclear Information System (INIS)

    Mrnka, M.; Bizek, V.; Nekovar, P.; Cizevska, S.; Schroetterova, D.

    1984-01-01

    PRIMENE JM-T was used for extraction. Its composition was found to approach the general formula C 21 H 43 NH 2 . It was found that the extraction of uranyl sulfate is lower in case of a higher steady-state concentration of sulfuric acid in the aqueous phase. Extraction is accompanied with coextraction of water. The results obtained showed that uranyl sulfate passes into the organic phase by two mechanisms: extraction with amine sulfate and extraction with free amine. A mathematical description of the process was made based on the obtained results. (E.S.)

  10. Wind Extraction for Natural Ventilation

    Science.gov (United States)

    Fagundes, Tadeu; Yaghoobian, Neda; Kumar, Rajan; Ordonez, Juan

    2017-11-01

    Due to the depletion of energy resources and the environmental impact of pollution and unsustainable energy resources, energy consumption has become one of the main concerns in our rapidly growing world. Natural ventilation, a traditional method to remove anthropogenic and solar heat gains, proved to be a cost-effective, alternative method to mechanical ventilation. However, while natural ventilation is simple in theory, its detailed design can be a challenge, particularly for wind-driven ventilation, which its performance highly involves the buildings' form, surrounding topography, turbulent flow characteristics, and climate. One of the main challenges with wind-driven natural ventilation schemes is due to the turbulent and unpredictable nature of the wind around the building that impose complex pressure loads on the structure. In practice, these challenges have resulted in founding the natural ventilation mainly on buoyancy (rather than the wind), as the primary force. This study is the initial step for investigating the physical principals of wind extraction over building walls and investigating strategies to reduce the dependence of the wind extraction on the incoming flow characteristics and the target building form.

  11. Injection and extraction for cyclotrons

    International Nuclear Information System (INIS)

    Heikkinen, P.

    1994-01-01

    External ion sources for cyclotrons are needed for polarised and heavy ions. This calls for injection systems, either radial or axial. Radial injection is also needed when a cyclotron works as a booster after another cyclotron or a linear accelerator (usually tandem). Requirements for injection differ from separated sector cyclotrons where there is plenty of room to house inflectors and/or strippers, to superconducting cyclotrons where the space is limited by a small magnet gap, and high magnetic field puts other limitations to the inflectors. Several extraction schemes are used in cyclotrons. Stripping injection is used for H - and also for heavy ions where the q/m ratio is usually doubled. For other cases, electric and magnetic deflection has to be used. To increase the turn separation before the first deflector, both resonant and non-resonant schemes are used. In this lecture, external injection systems are surveyed and some rules to thumb for injection parameters are given. Extraction schemes are also reviewed. (orig.)

  12. Solar Filament Extraction and Characterizing

    Science.gov (United States)

    Yuan, Yuan; Shih, F. Y.; Jing, J.; Wang, H.

    2010-05-01

    This paper presents a new method to extract and characterize solar filaments from H-alpha full-disk images produced by Big Bear Solar Observatory. A cascading Hough Transform method is designed to identify solar disk center location and radius. Solar disks are segmented from the background, and unbalanced illumination on the surface of solar disks is removed using polynomial surface fitting. And then a localized adaptive thresholding is employed to extract solar filament candidates. After the removal of small solar filament candidates, the remaining larger candidates are used as the seeds of region growing. The procedure of region growing not only connects broken filaments but also generate complete shape for each filament. Mathematical morphology thinning is adopted to produce the skeleton of each filament, and graph theory is used to prune branches and barbs to get the main skeleton. The length and the location of the main skeleton is characterized. The proposed method can help scientists and researches study the evolution of solar filament, for instance, to detect solar filament eruption. The presented method has already been used by Space Weather Research Lab of New Jersey Institute of Technology (http://swrl.njit.edu) to generate the solar filament online catalog using H-alpha full-disk images of Global H-alpha Network (http://swrl.njit.edu/ghn_web/).

  13. DESIGNING AN EVENT EXTRACTION SYSTEM

    Directory of Open Access Journals (Sweden)

    Botond BENEDEK

    2017-06-01

    Full Text Available In the Internet world, the amount of information available reaches very high quotas. In order to find specific information, some tools were created that automatically scroll through the existing web pages and update their databases with the latest information on the Internet. In order to systematize the search and achieve a result in a concrete form, another step is needed for processing the information returned by the search engine and generating the response in a more organized form. Centralizing events of a certain type is useful first of all for creating a news service. Through this system we are pursuing a knowledge - events from the Internet documents - extraction system. The system will recognize events of a certain type (weather, sports, politics, text data mining, etc. depending on how it will be trained (the concept it has in the dictionary. These events can be provided to the user, or it can also extract the context in which the event occurred, to indicate the initial form in which the event was embedded.

  14. 30 CFR 947.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 947.702 Section 947.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  15. 30 CFR 933.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 933.702 Section 933.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  16. 30 CFR 939.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 939.702 Section 939.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  17. 30 CFR 903.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 903.702 Section 903.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  18. 30 CFR 912.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 912.702 Section 912.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  19. 30 CFR 937.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 937.702 Section 937.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  20. 30 CFR 921.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 921.702 Section 921.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of the chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  1. 30 CFR 905.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 905.702 Section 905.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  2. 30 CFR 942.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 942.702 Section 942.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  3. 30 CFR 910.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 910.702 Section 910.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  4. 30 CFR 922.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 922.702 Section 922.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of Other...

  5. 30 CFR 941.702 - Exemption for coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Exemption for coal extraction incidental to the extraction of other minerals. 941.702 Section 941.702 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... other minerals. Part 702 of this chapter, Exemption for Coal Extraction Incidental to the Extraction of...

  6. 30 CFR 750.21 - Coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal extraction incidental to the extraction of... ENFORCEMENT, DEPARTMENT OF THE INTERIOR INDIAN LANDS PROGRAM REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS ON INDIAN LANDS § 750.21 Coal extraction incidental to the extraction of other minerals...

  7. Supercritical fluid extraction of uranium from tissue paper matrix using organic extractants

    International Nuclear Information System (INIS)

    Kanekar, A.S.; Bhattacharyya, A.; Pathak, P.N.; Mohapatra, P.K.; Manchanda, V.K.

    2009-01-01

    Direct extraction of dried uranyl nitrate from tissue paper matrix was carried out using supercritical carbon dioxide modified with methanol solutions of extractants such as tri-n-butyl phosphate (TBP) and di-n-hexyl octanamide (DHOA)). The effects of temperature, pressure, extractant and nitric acid concentration on the extraction of uranyl ion were investigated. (author)

  8. [Study on condition for extraction of arctiin from fruits of Arctium lappa using supercritical fluid extraction].

    Science.gov (United States)

    Dong, Wen-hong; Liu, Ben

    2006-08-01

    To study the feasibility of supercritical fluid extraction (SFE) for arctiin from the fruits of Arctium lappa. The extracts were analyzed by HPLC, optimum extraction conditions were studied by orthogonal tests. The optimal extraction conditions were: pressure 40 MPa, temperature 70 degrees C, using methanol as modifier carrier at the rate of 0.55 mL x min(-1), static extraction time 5 min, dynamic extraction 30 min, flow rate of CO2 2 L x min(-1). SFE has the superiority of adjustable polarity, and has the ability of extracting arctiin.

  9. Clinical evaluation of postradiation dental extraction

    International Nuclear Information System (INIS)

    Kusukawa, Jingo; Ohisi, Shinichiro; Kameyama, Tadamitsu; Yoshizumi, Munehiro; Hayabuchi, Naofumi

    1996-01-01

    Twenty-one patients who had undergone postradiation dental extraction were evaluated clinically. All patients had received irradiation for primary head and neck malignancies at doses ranging from 8 to 60 Gy (mean, 51.6 Gy). Time to dental extraction after irradiation ranged from 8 to 156 months (mean, 57.9 months). Of the 21 patients (80 teeth extracted, including 33 maxillary teeth and 47 mandibular teeth), one had delayed healing after wisdom tooth extraction due to postextraction irradiation. Thus, osteoradionecrosis after dental extraction did not develop. These results suggest that dental extraction after radiation is not contraindicated. To prevent complications, patients who have received radiation and require extractions should be cared for by oral and maxillofacial surgeons in close association with radiation oncologists. (author)

  10. Solvent extraction of noble metals by formazans

    International Nuclear Information System (INIS)

    Grote, M.; Hueppe, U.; Kettrup, A.

    1984-01-01

    The extraction properties of ion-pairs composed of quaternary ammonium cations and a sulphonated formazan were compared with those of an unsulphonated formazan, for various solvent media. In dichloromethane the combined system behaves as a 'coloured anion-exchanger', with displacement of the sulphonated formazan, whereas in toluene Pd(II) and Ag(I) are extracted as the metal formazan chelates from aqueous medium. The rates of extraction are remarkably higher than with the simple extractants. Because of the higher stability only the simple chelating extraction systems afford satisfactory separation of Pd(II) from excess of Pt(IV) and of Ag(I) from Cu(II). The extracted metals can be stripped and the extractant regenerated. (author)

  11. Extraction of some acids using aliphatic amines

    International Nuclear Information System (INIS)

    Matutano, L.

    1964-06-01

    Hydrochloric, nitric, sulphuric, perchloric, phosphoric, acetic and formic acids in aqueous solution (0.05 to 10 M) are extracted by amberlite LA2 and trilaurylamine in solution, 5 per cent by volume, in kerosene and xylene respectively. The extraction process consists of: neutralization of the amine salt; a 'molecular extraction', i.e. an extraction using an excess of acid with respect to the stoichiometry of the amine salt. According to the behaviour of the acid during the extraction, three groups may be distinguished: completely dissociated acids, carboxylic acids, phosphoric acid. This classification is also valid for the extraction of the water which occurs simultaneously with that of the acid. An extraction mechanism is put forward for formic acid and the formation constant of its amine salt is calculated. (author) [fr

  12. Inhibition of aluminum corrosion using Opuntia extract

    International Nuclear Information System (INIS)

    El-Etre, A.Y.

    2003-01-01

    The inhibitive action of the mucilage extracted from the modified stems of prickly pears, toward acid corrosion of aluminum, is tested using weight loss, thermometry, hydrogen evolution and polarization techniques. It was found that the extract acts as a good corrosion inhibitor for aluminum corrosion in 2.0 M HCl solution. The inhibition action of the extract was discussed in view of Langmuir adsorption isotherm. It was found that the adsorption of the extract on aluminum surface is a spontaneous process. The inhibition efficiency (IE) increases as the extract concentration is increased. The effect of temperature on the IE was studied. It was found that the presence of extract increases the activation energy of the corrosion reaction. Moreover, the thermodynamic parameters of the adsorption process were calculated. It was found also that the Opuntia extract provides a good protection to aluminum against pitting corrosion in chloride ion containing solutions

  13. Extraction efficiency of hydrophilic and lipophilic antioxidants from lyophilized foods using pressurized liquid extraction and manual extraction.

    Science.gov (United States)

    Watanabe, Jun; Oki, Tomoyuki; Takebayashi, Jun; Takano-Ishikawa, Yuko

    2014-09-01

    The efficient extraction of antioxidants from food samples is necessary in order to accurately measure their antioxidant capacities. α-Tocopherol and gallic acid were spiked into samples of 5 lyophilized and pulverized vegetables and fruits (onion, cabbage, Satsuma mandarin orange, pumpkin, and spinach). The lipophilic and hydrophilic antioxidants in the samples were sequentially extracted with a mixed solvent of n-hexane and dichloromethane, and then with acetic acid-acidified aqueous methanol. Duplicate samples were extracted: one set was extracted using an automated pressurized liquid extraction apparatus, and the other set was extracted manually. Spiked α-tocopherol and gallic acid were recovered almost quantitatively in the extracted lipophilic and hydrophilic fractions, respectively, especially when pressurized liquid extraction was used. The expected increase in lipophilic oxygen radical absorbance capacity (L-ORAC) due to spiking with α-tocopherol, and the expected increase in 2,2-diphenyl-1-picrylhydrazyl radical scavenging activities and total polyphenol content due to spiking with gallic acid, were all recovered in high yield. Relatively low recoveries, as reflected in the hydrophilic ORAC (H-ORAC) value, were obtained following spiking with gallic acid, suggesting an interaction between gallic acid and endogenous antioxidants. The H-ORAC values of gallic acid-spiked samples were almost the same as those of postadded (spiked) samples. These results clearly indicate that lipophilic and hydrophilic antioxidants are effectively extracted from lyophilized food, especially when pressurized liquid extraction is used. © 2014 Institute of Food Technologists®

  14. Quality Parameters of Curcuma Longa L. Extracts by Supercritical Fluid Extraction (SFE) and Ultrasonic Assisted Extraction (UAE)

    International Nuclear Information System (INIS)

    Zaibunnisa Abdul Haiyee; Siti Hafsah Mohd Shah; Khudzir Ismail; Nooraain Hashim; Wan Iryani Wan Ismail

    2016-01-01

    Turmeric is one of the prominently use herbal plants due to its diverse beneficial effects especially in Indian medicine. The rhizome part of the turmeric contains valuable compounds which have been said to owe its antimicrobial effects, anti-cancer, anti-inflammatory and enhance wound healing. Due to its short-life span and perishable properties, the conversion of the rhizome into turmeric extract is desirable. Several methods have been used for extraction such as Soxhlet extraction and pressurized liquid extraction (PLE). However, these techniques are tedious, laborious, time consuming and involves the usage of toxic organic solvent, of which safeness of the end product is doubtful. In this study, a rapid, reliable and green extraction method of supercritical fluid extraction (SFE) and ultrasonic assisted extraction (UAE) were used. SFE without modifier has resulted in 0.0006 mg/ 100 g of curcuminoids concentration and 5.62 % of yield (dry weight basis). UAE using ethanol was able to produce significantly the highest yield (6.40 %, dry weight basis) and the highest curcuminoids concentration (0.1020 mg/ 100 g). However, SFE was able to produce extract that contain significantly higher major volatile compounds; tumerone, ar-turmerone and curlone. Therefore, this study proves that both extraction methods were able to produce high quality turmeric extract. (author)

  15. Chemical Profiling of Acalypha Indica Obtained from Supercritical Carbon Dioxide Extraction and Soxhlet Extraction Methods

    OpenAIRE

    Surangkana Chaichoowong; Jan Bernd Bol; Pornprapa Bol; Thomas Gamse; Malinee Sriariyanun

    2017-01-01

    Acalypha indica is a weed that grows in South-East Asia. It contains several valuable compounds that can be used for curing various diseases such as rheumatism, skin infection and blood dysentery. Here, the extraction of A. indica using Soxhlet extraction with two different solvents and supercritical CO2 extraction (SCE) with two different temperatures (40 and 60°C) was performed. In Soxhlet extraction, ethanol solvent provided the highest extraction yield of 34.36%. For SCE, the increased te...

  16. Extraction and Quantitative HPLC Analysis of Coumarin in Hydroalcoholic Extracts of Mikania glomerata Spreng: ("guaco" Leaves

    Directory of Open Access Journals (Sweden)

    Celeghini Renata M. S.

    2001-01-01

    Full Text Available Methods for preparation of hydroalcoholic extracts of "guaco" (Mikania glomerata Spreng. leaves were compared: maceration, maceration under sonication, infusion and supercritical fluid extraction. Evaluation of these methods showed that maceration under sonication had the best results, when considering the ratio extraction yield/extraction time. A high performance liquid chromatography (HPLC procedure for the determination of coumarin in these hydroalcoholic extracts of "guaco" leaves is described. The HPLC method is shown to be sensitive and reproducible.

  17. Changing perspectives on resource extraction.

    Science.gov (United States)

    Gibson, Hazel; Stewart, Iain; Pahl, Sabine; Stokes, Alison

    2015-04-01

    Over the last century, resource extraction in the UK has changed immeasurably; from relatively small-scale, manually-operated facilities to the larger technological advanced sites that exist today. The communities that live near these sites have also changed, from housing workers that were as much of a resource as the geological material, to local residents who are environmentally literate and strongly value their landscape. Nowadays great pressure is put on the extractive industry to work in both environmentally sustainable and socially ethical ways, but how does this impact upon the local population? How do communities perceive the resource extraction that neighbours them? And is this perception rooted in a general understanding of geology and the subsurface? To explore resident's perceptions of the geological environment, three villages in the southwest of England have been investigated, using a mixed-methods mental models approach. The villages were selected as each has a different geological setting, both commercially and culturally. The first village has a strong historical geological identity, but little current geological activity. The second village has a large tungsten mine in the process of beginning production. The third village has no obvious cultural or commercial relationships with geology and acts as the control site. A broad sample from each of the three villages was qualitatively interviewed, the results of which were analyzed using an emergent thematic coding scheme. These qualitative results were then modelled using Morgan et al's mental models method (2002) and tested using a quantitative questionnaire. The results of this mixed method approach reveals the principal perceptions (or mental models) of residents in these three villages. The villages each present a different general perception of resource exploitation, which appears to be culturally driven, with the first village having the most positive correlations. These mental models are

  18. Extracting information from multiplex networks

    Science.gov (United States)

    Iacovacci, Jacopo; Bianconi, Ginestra

    2016-06-01

    Multiplex networks are generalized network structures that are able to describe networks in which the same set of nodes are connected by links that have different connotations. Multiplex networks are ubiquitous since they describe social, financial, engineering, and biological networks as well. Extending our ability to analyze complex networks to multiplex network structures increases greatly the level of information that is possible to extract from big data. For these reasons, characterizing the centrality of nodes in multiplex networks and finding new ways to solve challenging inference problems defined on multiplex networks are fundamental questions of network science. In this paper, we discuss the relevance of the Multiplex PageRank algorithm for measuring the centrality of nodes in multilayer networks and we characterize the utility of the recently introduced indicator function Θ ˜ S for describing their mesoscale organization and community structure. As working examples for studying these measures, we consider three multiplex network datasets coming for social science.

  19. Adaptive web data extraction policies

    Directory of Open Access Journals (Sweden)

    Provetti, Alessandro

    2008-12-01

    Full Text Available Web data extraction is concerned, among other things, with routine data accessing and downloading from continuously-updated dynamic Web pages. There is a relevant trade-off between the rate at which the external Web sites are accessed and the computational burden on the accessing client. We address the problem by proposing a predictive model, typical of the Operating Systems literature, of the rate-of-update of each Web source. The presented model has been implemented into a new version of the Dynamo project: a middleware that assists in generating informative RSS feeds out of traditional HTML Web sites. To be effective, i.e., make RSS feeds be timely and informative and to be scalable, Dynamo needs a careful tuning and customization of its polling policies, which are described in detail.

  20. Nickel extraction from nickel matte

    Science.gov (United States)

    Subagja, R.

    2018-01-01

    In present work, the results of research activities to make nickel metal from nickel matte are presented. The research activities were covering a) nickel matte characterization using Inductively Couple plasma (ICP), Electron Probe Micro Analyzer (EPMA) and X-Ray Diffraction (XRD), b) nickel matte dissolution process to dissolve nickel from nickel matte into the spent electrolyte solutions that contains hydrochloric acid, c) purification of nickel chloride leach solution by copper cementation process to remove copper using nickel matte, selective precipitation process to remove iron, solvent extraction using Tri normal octyl amine to separate cobalt from nickel chloride solutions and d) Nickel electro winning process to precipitate nickel into the cathode surface from purified nickel chloride solution by using direct current. The research activities created 99, 72 % pure nickel metal as the final product of the process.

  1. Extractive {sup 90}Y generator

    Energy Technology Data Exchange (ETDEWEB)

    Kodina, G.E. [State Scientific Center, Moscow (Russian Federation). Institute of Giophysics; Korpusov, G.V.; Filyanin, A.T. [Russian Academy of Sciences, Moscow (Russian Federation). Institute of Physical Chemistry

    1997-10-01

    The generator for {sup 90}Y production is made up of two units - an extractive unit and a unit for deep purification. Contrary to the well-known methods of {sup 90}Y separation two mineral acids are used in the developed technology. The solutions of nitric acid are used for preliminary separation of {sup 90}Y and the solutions of hydrochloric acid are used for the deep purification of {sup 90}Y from {sup 90}Sr and stripping. The optimum conditions for carrying out this technology were found. The following results are reported: the carry-over of the stationary phase is excluded in this generator; the separation time is 30-60 minutes; the yield of the final product is not less than 95%; impurity of {sup 90}Sr is not more than 10{sup -9-}-{sup -10}%; the content of the chemical (nonactive) impurities is not more than the allowed one for radiopharmaceuticals 4 refs., 4 tabs., 5 figs.

  2. Incremental Observer Relative Data Extraction

    DEFF Research Database (Denmark)

    Bukauskas, Linas; Bøhlen, Michael Hanspeter

    2004-01-01

    The visual exploration of large databases calls for a tight coupling of database and visualization systems. Current visualization systems typically fetch all the data and organize it in a scene tree that is then used to render the visible data. For immersive data explorations in a Cave...... or a Panorama, where an observer is data space this approach is far from optimal. A more scalable approach is to make the observer-aware database system and to restrict the communication between the database and visualization systems to the relevant data. In this paper VR-tree, an extension of the R......-tree, is used to index visibility ranges of objects. We introduce a new operator for incremental Observer Relative data Extraction (iORDE). We propose the Volatile Access STructure (VAST), a lightweight main memory structure that is created on the fly and is maintained during visual data explorations. VAST...

  3. Clinical utility of curcumin extract.

    Science.gov (United States)

    Asher, Gary N; Spelman, Kevin

    2013-01-01

    Turmeric root has been used medicinally in China and India for thousands of years. The active components are thought to be the curcuminoids, primarily curcumin, which is commonly available worldwide as a standardized extract. This article reviews the pharmacology of curcuminoids, their use and efficacy, potential adverse effects, and dosage and standardization. Preclinical studies point to mechanisms of action that are predominantly anti-inflammatory and antineoplastic, while early human clinical trials suggest beneficial effects for dyspepsia, peptic ulcer, inflammatory bowel disease, rheumatoid arthritis, osteoarthritis, uveitis, orbital pseudotumor, and pancreatic cancer. Curcumin is well-tolerated; the most common side effects are nausea and diarrhea. Theoretical interactions exist due to purported effects on metabolic enzymes and transport proteins, but clinical reports do not support any meaningful interactions. Nonetheless, caution, especially with chemotherapy agents, is advised. Late-phase clinical trials are still needed to confirm most beneficial effects.

  4. Topic extraction from adverbial clauses

    Directory of Open Access Journals (Sweden)

    Carlos Rubio Alcalá

    2016-06-01

    Full Text Available This paper offers new data to support findings about Topic extraction from adverbial clauses. Since such clauses are strong islands, they should not allow extraction of any kind, but we show here that if the appropriate conditions are met, Topics of the CLLD kind in Romance can move out of them. We propose that two conditions must be met for such movement to be possible: the first is that the adverbial clause must have undergone topicalisation in the first place; the second is that the adverbial clause is inherently topical from a semantic viewpoint. Contrast with other language families (Germanic, Quechua and Japanese is provided and the semantic implications of the proposal are briefly discussed. Keywords: topicalisation; Clitic Left Dislocation; syntactic islands; adverbial clauses Este artículo ofrece nuevos datos sobre la extracción de Tópicos desde oraciones subordinadas adverbiales. Dado que dichas oraciones son islas fuertes, no deberían permitir extracción de ningún tipo, pero mostramos que si se dan las condiciones apropiadas, los Tópicos del tipo CLLD en lenguas románicas pueden desplazarse fuera de ellas. Proponemos que se deben cumplir dos condiciones para que ese movimiento sea posible: la primera es que la propia subordinada adverbial se haya topicalizado en primer lugar; la segunda es que la subordinada adverbial sea inherentemente un Tópico desde el punto de vista semántico. Proporcionamos también algunos contrastes con otras familias lingüísticas (germánica, quechua y japonés y se discuten brevemente las implicaciones semánticas de la propuesta. Palabras clave: topicalización; dislocación a la izquierda con clítico; islas sintácticas; oraciones adverbiales

  5. Extraction of uranium from seawater

    International Nuclear Information System (INIS)

    Kanno, M.

    1977-01-01

    The nuclear power generation is thought to be very important in Japan. However, known domestic uranium resources in Japan are very rare. So, extraction of uranium from sea water have been carried out since 1962 at Japan Tobacco and Salt Public Corporation. There are a number of results obtained also by Kyoto University, Shikoku Govenment Industrial Research Institute, Tokyo University and others. In order to investigate the technical and economical feasibility of extraction of uranium and other resources from sea water, a research program was started in fiscal 1975, sponsored by the Ministry of International Trade and Industry with the budget of about $440,000. In this program, the conceptional design of two types of model plants, the ''column type'' and the ''tidal type'' was drawn on the design bases set up with available information. It was found that there has been several problems waiting solution, but there were no technically fatal problems. Adsorption tests were carried out with adsorbents of more than eleven types, including titanium hydroxide, and it was found that titanium hydroxide made by titanyl surphate and urea had the largest adsorption capacity of uranium among them. Elution experiments were performed only with ammonium carbonate and the efficiency at the temperature of 60 0 C showed three times higher than that of 20 0 C. A few long term column operation was conducted, mainly with the adsorbent of granulated titanium hydroxide for 15-60 days. The maximum yield of uranium throughout the adsorption and elution operation was over 20% and macimum concentration of uranium in eluate was 7 ppm

  6. Bioactivity of Neem (Azadirachta indica) callus extract

    International Nuclear Information System (INIS)

    Ahmed, I.M.

    2008-04-01

    This study was conducted in order to explore the possibility of utilizing plant tissue culture techniques for production of secondary metabolites from callus culture of Azadirachta indica (Neem) and to investigate the bioactivity of the established callus extract in comparison with the extract from the intact leaves. The presence of secondary metabolites in the extracts was detected by Thin Layer Chromatography (TLC). Both the callus and leaf extracts eluted five fraction of compounds and it were observed that callus extract had a good resolution. various extract concentration (5.10. and 20 mg/ml) were determined for the rate and extent of inhibition kinetics against staphylococcus aureus. Escherichia coli, and candida albicans. Results showed that callus extract of A. indica wiped out all viable cells of C. albicans within 18 hours and the subsequent concentration 5 and 10 mg/ m1 retard the growth after 24 h. A higher concentration of 20 mg/ ml had the same effect on S. aureus after 6 h and the E. coli cells were completely inhibited by the extracts after 24 h. Similar kinetics were showed by leaf extract but in slight rate as compared to the callus extract. In general both extract posses antimicrobial activity with notable efficient rates. For assaying of the inhibitory effect on some phyto pathogens the effect of different concentrations of the callus and leaf extracts on the radial growth of Drechslera rostrata. Fusarium oxysporum and Alterneria alternata were in vitro assessed. Obvious inhibitory effect was observed on the mycelia radial growth of the three treated fungi. The level of inhibition increased with the increase of te extract concentration. The maximum inhibitory effect (84%) was recorded with Drechslera rostrata when inoculated in media contain 20 mg/ ml of callus while the inhibition rate of mycelia growth of the same species reaches 61% when inoculated in a medium contain the same concentration of the neem leaf extract. The subsequent

  7. Modeling and prediction of extraction profile for microwave-assisted extraction based on absorbed microwave energy.

    Science.gov (United States)

    Chan, Chung-Hung; Yusoff, Rozita; Ngoh, Gek-Cheng

    2013-09-01

    A modeling technique based on absorbed microwave energy was proposed to model microwave-assisted extraction (MAE) of antioxidant compounds from cocoa (Theobroma cacao L.) leaves. By adapting suitable extraction model at the basis of microwave energy absorbed during extraction, the model can be developed to predict extraction profile of MAE at various microwave irradiation power (100-600 W) and solvent loading (100-300 ml). Verification with experimental data confirmed that the prediction was accurate in capturing the extraction profile of MAE (R-square value greater than 0.87). Besides, the predicted yields from the model showed good agreement with the experimental results with less than 10% deviation observed. Furthermore, suitable extraction times to ensure high extraction yield at various MAE conditions can be estimated based on absorbed microwave energy. The estimation is feasible as more than 85% of active compounds can be extracted when compared with the conventional extraction technique. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Extraction of functional ingredients from spinach (Spinacia oleracea L.) using liquid solvent and supercritical CO₂ extraction.

    Science.gov (United States)

    Jaime, Laura; Vázquez, Erika; Fornari, Tiziana; López-Hazas, María del Carmen; García-Risco, Mónica R; Santoyo, Susana; Reglero, Guillermo

    2015-03-15

    In this work three different techniques were applied to extract dry leaves of spinach (Spinacia oleracea): solid-liquid extraction (SLE), pressurised liquid extraction (PLE) and supercritical fluid extraction (SFE) to investigate the influence of extraction solvent and technique on extracts composition and antioxidant activity. Moreover, the influence of carotenoids and phenolic compounds on the antioxidant and anti-inflammatory activities of spinach extracts was also studied. The higher concentrations of carotenoids and the lower content of phenolic compounds were observed in the supercritical CO₂ extracts; whereas water and/or ethanol PLE extracts presented low amounts of carotenoids and the higher concentrations of phenolic compounds. PLE extract with the highest content of phenolic compounds showed the highest antioxidant activity, although SFE carotenoid rich extract also showed a high antioxidant activity. Moreover, both extracts presented an important anti-inflammatory activity. PLE seems to be a good technique for the extraction of antioxidant and anti-inflammatory compounds from spinach leaves. Moreover, spinach phenolic compounds and carotenoids present a high antioxidant activity, whereas spinach carotenoids seem to show a higher anti-inflammatory activity than phenolic compounds. It is worth noting that of our knowledge this is the first time the anti-inflammatory activity of lipophilic extracts from spinach leaves is reported. © 2014 Society of Chemical Industry.

  9. A hybrid approach for robust multilingual toponym extraction and disambiguation

    NARCIS (Netherlands)

    Habib, Mena Badieh; van Keulen, Maurice

    Toponym extraction and disambiguation are key topics recently addressed by fields of Information Extraction and Geographical Information Retrieval. Toponym extraction and disambiguation are highly dependent processes. Not only toponym extraction effectiveness affects disambiguation, but also

  10. Caffeine adsorption of montmorillonite in coffee extracts.

    Science.gov (United States)

    Shiono, Takashi; Yamamoto, Kenichiro; Yotsumoto, Yuko; Yoshida, Aruto

    2017-08-01

    The growth in health-conscious consumers continues to drive the demand for a wide variety of decaffeinated beverages. We previously developed a new technology using montmorillonite (MMT) in selective decaffeination of tea extract. This study evaluated and compared decaffeination of coffee extract using MMT and activated carbon (AC). MMT adsorbed caffeine without significant adsorption of caffeoylquinic acids (CQAs), feruloylquinic acids (FQAs), dicaffeoylquinic acids (di-CQAs), or caffeoylquinic lactones (CQLs). AC adsorbed caffeine, chlorogenic acids (CGAs) and CQLs simultaneously. The results suggested that the adsorption selectivity for caffeine in coffee extract is higher in MMT than AC. The caffeine adsorption isotherms of MMT in coffee extract fitted well to the Langmuir adsorption model. The adsorption properties in coffee extracts from the same species were comparable, regardless of roasting level and locality of growth. Our findings suggest that MMT is a useful adsorbent in the decaffeination of a wide range of coffee extracts.

  11. New extraction chromatographic material for rhenium separation

    International Nuclear Information System (INIS)

    Lucanikova, M.; Czech Technical University, Prague; Kucera, J.; Czech Technical University, Prague; Sebesta, F.

    2008-01-01

    Three types of the extraction chromatographic materials, composed from Aliquat R 336 deposited in the polyacrylonitrile (PAN) beads and prepared by different procedures, were compared for extraction of rhenium. The best properties were exhibited when the solid extractant was prepared by impregnation of the ready-made PAN beads. Solid extractant prepared by direct coagulation of the beads from the suspension of Aliquat R 336 in solution of PAN in nitric acid differs only by lower capacity in dynamic conditions. Material prepared from the PAN solution in dimethylsulfoxide was the worst because Aliquat R 336 was washed out from the beads during coagulation of the polymer and the extraction capacity was low. As it is shown, the first two solid extractants are fully comparable with the commercial TEVA Resin. (author)

  12. Extraction of scandium by organic substance melts

    International Nuclear Information System (INIS)

    Gladyshev, V.P.; Lobanov, F.I.; Zebreva, A.I.; Andreeva, N.N.; Manuilova, O.A.; Il'yukevich, Yu.A.

    1984-01-01

    Regularities of scandium extraction by the melts of octadecanicoic acid, n-carbonic acids of C 17 -C 20 commerical fraction and mixtures of tributylphosphate (TBP) with paraffin at (70+-1) deg C have been studied. The optimum conditions for scandium extraction in the melt of organic substances are determined. A scheme of the extraction by the melts of higher carbonic acids at ninitial metal concentrations of 10 -5 to 10 -3 mol/l has been suggested. The scandium compound has been isolated in solid form, its composition having been determined. The main advantages of extraction by melts are as follows: a possibility to attain high distribution coefficients, distinct separation of phases after extraction, the absence of emulsions, elimination of employing inflammable and toxic solvents, a possibility of rapid X-ray fluorescence determinatinon of scandium directly in solid extract

  13. Extraction of fluoride metal complexes by octanols

    International Nuclear Information System (INIS)

    Baklanova, I.V.; Nikolaev, A.I.; Il'in, E.G.; Majorov, V.G.

    2005-01-01

    The extraction of niobium(V) and tantalum(V) by octanols, including 1-octanol, 2-octanol, and iso-octanol (2-ethylhexanol), was studied. The composition of the octanols and their solubility in various aqueous solutions were evaluated. The capacity of the octanols for tantalum(V) and niobium(V), the extraction properties of the octanols, the viscosity of extracts under conditions of metal fluoride extraction, and the temperature dependence of the viscosity of the octanols were studied. The composition of the extracted complexes was studied by IR and NMR spectroscopy and chemical analysis, and the hydration-solvation mechanism of the extraction of tantalum(V) and niobium(V) was supported [ru

  14. Recent solvent extraction experience at Savannah River

    International Nuclear Information System (INIS)

    Gray, L.W.; Burney, G.A.; Gray, J.H.; Hodges, M.E.; Holt, D.L.; Macafee, I.M.; Reif, D.J.; Shook, H.E.

    1986-01-01

    Tributyl phosphate-based solvent extraction processes have been used at Savannah River for more than 30 years to separate and purify thorium, uranium, neptunium, plutonium, americium, and curium isotopes. This report summarizes the advancement of solvent extraction technology at Savannah River during the 1980's. Topics that are discussed include equipment improvements, solvent treatment, waste reduction, and an improved understanding of the various chemistries in the process streams entering, within, and leaving the solvent extraction processes

  15. Extraction of scandium by aromatic carboxylic acids

    International Nuclear Information System (INIS)

    Kamenev, V.F.; Fadeeva, V.I.

    1977-01-01

    Extraction of complex compounds af scandium with salicylic, phenyl- and diphenylacetic acids with chloroform solutions of tetraethyldiamideheptylphosphate as a donor-active additive in relation to the pH and reagent concentration has been studied. Extraction of salicylates of some elements (Ta, Nb, Zr, Hf, Mo) by solutions of tetraethyldiamideheptylphosphate in chloroform has been investigated, and the possibility of their extraction separation from scandium is shown

  16. Resource Extraction in a Political Economy Framework

    OpenAIRE

    Ryszka, Karolina

    2013-01-01

    We analyze resource extraction in a political economy setting by introducing a political leader who optimizes both his own and the society's welfare function. We find that accounting for the private utility of a political elite, its higher discount rate and a different time horizon generally speeds up extraction. The higher than optimal resource extraction is not only relevant in welfare terms, but also regarding possible consequences with respect to climate change. The effect of higher extra...

  17. Extraction chromatography of lanthanides, ch. 8

    International Nuclear Information System (INIS)

    Siekierski, S.; Fidelis, I.

    1975-01-01

    The extraction of lanthanides by chelate formation with acidic organophosphorous extractants, by solvation of salts, and in the form of ion pairs is reviewed. The double-double effect and its significance for the lanthanide as well as the actinide separation is discussed. A short survey of the existing data on the enthalpies of lanthanide extraction and on the influence of temperature on their separation factor is given. The resolution ability of columns used for the separation of lanthanides is briefly surveyed

  18. Supercritical solvent extraction of oil sand bitumen

    Science.gov (United States)

    Imanbayev, Ye. I.; Ongarbayev, Ye. K.; Tileuberdi, Ye.; Mansurov, Z. A.; Golovko, A. K.; Rudyk, S.

    2017-08-01

    The supercritical solvent extraction of bitumen from oil sand studied with organic solvents. The experiments were performed in autoclave reactor at temperature above 255 °C and pressure 29 atm with stirring for 6 h. The reaction resulted in the formation of coke products with mineral part of oil sands. The remaining products separated into SARA fractions. The properties of the obtained products were studied. The supercritical solvent extraction significantly upgraded extracted natural bitumen.

  19. Investigations on bark extracts of Picea abies

    Energy Technology Data Exchange (ETDEWEB)

    Weissmann, G

    1981-01-01

    Successive extraction of the bark with solvents of increasing polarity yielded about 60% of soluble material. The alcohol and water extracts contained principally simple polyphenols and their glycosides, tannins, mono-and disaccharides, soluble hemicelluloses and pectins. Hot water extracts are suitable for production of adhesives by reaction with formaldehyde, but their polyphenol content is only 50%. The polyphenols and their glycosides, and glucosides of hydroxystilbenes, were investigated in detail.

  20. Combined transuranic-strontium extraction process

    Science.gov (United States)

    Horwitz, E. Philip; Dietz, Mark L.

    1992-01-01

    The transuranic (TRU) elements neptunium, plutonium and americium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N,N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU's together with strontium, uranium and technetium. The TRU's and the strontium can then be selectively stripped from the extractant for disposal.

  1. Biosynthesis of silver nanoparticles using Stevia extracts

    International Nuclear Information System (INIS)

    Laguta, I.V.; Fesenko, T.V.; Stavinskaya, O.N.; Shpak, L.M.; Dzyuba, O.I.

    2015-01-01

    Silver nanoparticles are synthesized using Stevia rebaudiana extracts. It is shown that the rate of nanoparticles formation is affected by plant cultivation conditions. It is found that, in the presence of the extract from callus, the formation of nanoparticles occurs faster than in the presence of extracts from plants grown under conditions of ex situ and in vitro. The synthesized silver nanoparticles were studied by UV and IR spectroscopies

  2. Binary Solvent Extraction System and Extraction Time Effects on Phenolic Antioxidants from Kenaf Seeds (Hibiscus cannabinus L.) Extracted by a Pulsed Ultrasonic-Assisted Extraction

    OpenAIRE

    Yu Hua Wong; Hwee Wen Lau; Chin Ping Tan; Kamariah Long; Kar Lin Nyam

    2014-01-01

    The aim of this study was to determine the best parameter for extracting phenolic-enriched kenaf (Hibiscus cannabinus L.) seeds by a pulsed ultrasonic-assisted extraction. The antioxidant activities of ultrasonic-assisted kenaf seed extracts (KSE) were determined by a 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity assay, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging assay, β -carotene bleaching inhibition assay, and ferric reducing antioxi...

  3. Extraction and Characterization of Cottonseed (Gossypium) Oil

    OpenAIRE

    Efomah Andrew Ndudi; Orhevba Bosede Adelola

    2012-01-01

    This study investigated the extraction and characterization of cottonseed oil using solvent extraction method. Normal hexane was used as solvent in the extraction process. The AOAC method of Analysis was employed in the determination of the chemical, physical and proximate compositions of the oil. The chemical properties of the oil determined include the saponification value, free fatty acid, iodine value, peroxide value and acid value. The physical properties of the oil determined are viscos...

  4. Extraction of scandium by aromatic carboxylic acids

    Energy Technology Data Exchange (ETDEWEB)

    Kamenev, V F; Fadeeva, V I [Moskovskij Gosudarstvennyj Univ. (USSR)

    1977-04-01

    Extraction of complex compounds af scandium with salicylic, phenyl- and diphenylacetic acids with chloroform solutions of tetraethyldiamideheptylphosphate as a donor-active additive in relation to the pH and reagent concentration has been studied. Extraction of salicylates of some elements (Ta, Nb, Zr, Hf, Mo) by solutions of tetraethyldiamideheptylphosphate in chloroform has been investigated, and the possibility of their extraction separation from scandium is shown.

  5. Rules Extraction with an Immune Algorithm

    Directory of Open Access Journals (Sweden)

    Deqin Yan

    2007-12-01

    Full Text Available In this paper, a method of extracting rules with immune algorithms from information systems is proposed. Designing an immune algorithm is based on a sharing mechanism to extract rules. The principle of sharing and competing resources in the sharing mechanism is consistent with the relationship of sharing and rivalry among rules. In order to extract rules efficiently, a new concept of flexible confidence and rule measurement is introduced. Experiments demonstrate that the proposed method is effective.

  6. Comparative Neuropharmacological Activities Methanolic Extracts of ...

    African Journals Online (AJOL)

    Comparative neuropharmacological efficacy of the leaf and root 70 % methanol extract of Cissus cornifolia was studied in mice. The extractive values of the leaf and root methanol extract was found to be 31.5 g with yield of 12.6 %(w/w) and 37.8 g with the yield of 15.12 %(w/w) respectively. The acute toxicity (LD50) values ...

  7. Zingiber officinale Roscoe aqueous extract modulates ...

    African Journals Online (AJOL)

    Zingiber officinale Roscoe aqueous extract modulates Matrixmetalloproteinases and tissue inhibitors of Metalloproteinases expressions in Dengue virus-infected cells: implications for prevention of vascular permeability.

  8. Saw palmetto ethanol extract inhibits adipocyte differentiation.

    Science.gov (United States)

    Villaverde, Nicole; Galvis, Adriana; Marcano, Adriana; Priestap, Horacio A; Bennett, Bradley C; Barbieri, M Alejandro

    2013-07-01

    The fruits of saw palmetto have been used for the treatment of a variety of urinary and reproductive system problems. In this study we investigated whether the fruit extracts affect in vitro adipogenesis. Saw palmetto ethanol extract inhibited the lipid droplet accumulation by induction media in a dose-dependent manner, and it also attenuated the protein expressions of C-EBPα and PPARγ. Phosphorylation of Erk1/2 and Akt1 were also decreased by saw palmetto ethanol extract. This report suggests that saw palmetto extracts selectively affect the adipocyte differentiation through the modulation of several key factors that play a critical role during adipogenesis.

  9. Metal extraction by amides of carboxylic acids

    International Nuclear Information System (INIS)

    Skorovarov, D.I.; Chumakova, G.M.; Rusin, L.I.; Ul'anov, V.S.; Sviridova, R.A.; Sviridov, A.L.

    1988-01-01

    Extraction ability of various amides was studied. Data on extraction of rare earths, vanadium, molybdenum, rhenium, uranium, niobium, tantalum by N,N-dibutyl-amides of acetic, nonanic acids and fatly synthetic acids of C 7 -C 9 fractions are presented. Effect of salting-out agents, inorganic acid concentrations on extraction process was studied. Potential ability of using amides of carboxylic acids for extractional concentration of rare earths as well as for recovery and separation of iron, rhenium, vanadium, molybdenum, uranium, niobium, and tantalum was shown

  10. Light extraction block with curved surface

    Science.gov (United States)

    Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.

    2016-03-22

    Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.

  11. Cytotoxic Effects of Bangladeshi Medicinal Plant Extracts

    Directory of Open Access Journals (Sweden)

    Shaikh J. Uddin

    2011-01-01

    Full Text Available To investigate the cytotoxic effect of some Bangladeshi medicinal plant extracts, 16 Bangladeshi medicinal plants were successively extracted with n-hexane, dichloromethane, methanol and water. The methanolic and aqueous extracts were screened for cytotoxic activity against healthy mouse fibroblasts (NIH3T3 and three human cancer-cell lines (gastric: AGS; colon: HT-29; and breast: MDA-MB-435S using the MTT assay. Two methanolic extracts (Hygrophila auriculata and Hibiscus tiliaceous and one aqueous extract (Limnophila indica showed no toxicity against healthy mouse fibroblasts, but selective cytotoxicity against breast cancer cells (IC50 1.1–1.6 mg mL−1. Seven methanolic extracts from L. indica, Clerodendron inerme, Cynometra ramiflora, Xylocarpus moluccensis, Argemone mexicana, Ammannia baccifera and Acrostichum aureum and four aqueous extracts from Hygrophila auriculata, Bruguiera gymnorrhiza, X. moluccensis and Aegiceras corniculatum showed low toxicity (IC50 > 2.5 mg mL−1 against mouse fibroblasts but selective cytotoxicity (IC50 0.2–2.3 mg mL−1 against different cancer cell lines. The methanolic extract of Blumea lacera showed the highest cytotoxicity (IC50 0.01–0.08 mg mL−1 against all tested cell lines among all extracts tested in this study. For some of the plants their traditional use as anticancer treatments correlates with the cytotoxic results, whereas for others so far unknown cytotoxic activities were identified.

  12. Methanol Extract of Myelophycus caespitosus Inhibits the ...

    African Journals Online (AJOL)

    Methanol Extract of Myelophycus caespitosus Inhibits the Inflammatory Response in Lipopolysaccharidestimulated BV2 Microglial Cells by Downregulating NF-kB via Inhibition of the Akt Signaling Pathway.

  13. A novel perspective on pectin extraction

    DEFF Research Database (Denmark)

    Dominiak, Malgorzata Maria

    optimization is a long process because the evaluation of the final product quality is accomplished at the end of the procedure, employing time-consuming off-line laboratory tests. Fourier transform infrared spectroscopy (FTIR) and carbohydrate microarrays, combined with chemometrics, were evaluated...... determined the optimal extraction time for both the enzymatic and acidic extraction processes. The combined results suggested major differences in the crude pectin extract traits of enzymatically vs. acidically extracted pectin with respect to the degree of esterification, purity, and abundance...

  14. Ge extraction from gasification fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Oriol Font; Xavier Querol; Angel Lopez-Soler; Jose M. Chimenos; Ana I. Fernandez; Silvia Burgos; Francisco Garcia Pena [Institute of Earth Sciences ' Jaume Almera' , Barcelona (Spain)

    2005-08-01

    Water-soluble germanium species (GeS{sub 2}, GeS and hexagonal-GeO{sub 2}) are generated during coal gasification and retained in fly ash. This fact together with the high market value of this element and the relatively high contents in the fly ashes of the Puertollano Integrated Gasification in Combined Cycle (IGCC) plant directed our research towards the development of an extraction process for this element. Major objectives of this research was to find a low cost and environmentally suitable process. Several water based extraction tests were carried out using different Puertollano IGCC fly ash samples, under different temperatures, water/fly ash ratios, and extraction times. High Ge extraction yields (up to 84%) were obtained at room temperature (25{sup o}C) but also high proportions of other trace elements (impurities) were simultaneously extracted. Increasing the extraction temperature to 50, 90 and 150{sup o}C, Ge extraction yields were kept at similar levels, while reducing the content of impurities, the water/fly ash ratio and extraction time. The experimental data point out the influence of chloride, calcium and sulphide dissolutions on the Ge extraction. 16 refs., 9 figs., 6 tabs.

  15. Extraction of radioactive cesium from tea leaves

    International Nuclear Information System (INIS)

    Yano, Yukiko; Kubo, M. Kenya; Higaki, Shogo; Hirota, Masahiro; Nomura, Kiyoshi

    2011-01-01

    Radioactive contamination of foodstuffs attributed to the Fukushima Daiichi nuclear disaster has become a social problem. This study investigated the extraction of radioactive cesium from the contaminated leaves to the tea. The green tea was brewed twice reusing the same leaves to study the difference in extraction of cesium between the first and second brew. Moreover, the extraction of cesium was studied in correlation to brewing time. The concentration of radioactive cesium was determined with gamma spectrometry, and the concentration of caffeine was determined with absorption spectrometry. About 40% of cesium was extracted from leaves in the first brew, and about 80% was extracted in the second brew. The extraction of cesium increased over time, and it reached about 80% after 10 minutes brew. The ratio of radioactive cesium to caffeine decreased linearly over time. This study revealed that the extraction of cesium was higher for the second brew, and a rapid increase in extraction was seen as the tea was brewed for 6 minutes and more. Therefore, the first brew of green tea, which was brewed within 5 minutes, contained the least extraction of radioactive cesium from the contaminated leaves. (author)

  16. Extraction of scandium salicylate by tetraethyldiamidoheptyl phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Kamenev, V F; Fadeeva, V I; Zyk, N V [Moskovskij Gosudarstvennyj Univ. (USSR). Kafedra Analiticheskoj Khimii

    1976-11-01

    Scandium salicylate is extracted with chloroform in a narrow pH range 3-4 and at the maximum concentration of salicylic acid (H/sub 2/A) in an organic phase, the distribution coefficient reaches 0.1. In the presence of tetraethyldiamideheptylphosphate (DAHP) the zone of maximum extraction grows and the distribution coefficient increases. The ratio of the components in the complex extracted is Sc:H/sub 2/A:DAHPh=1:3:2. The extraction constant is Ksub(ex)=(2.00+-0.02).

  17. Significance of wood extractives for wood bonding.

    Science.gov (United States)

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  18. Extraction of Rose Bengal into chloroform

    International Nuclear Information System (INIS)

    Lengyel, J.; Vecernik, J.; Krtil, J.

    1982-01-01

    The paper describes the extraction of Rose Bengal (RB)into chloroform. A radiometric method with the aid of 131 Ilabelled RB was used. The efficiency of the extraction in dependence on pH and RB concentration was studied. For the interpretation of the extraction data the values of pK 1 and pK 2 of RB were determined spectrophotometrical-ly and potentiometrically. A mechanism for the RB extraction into chloroform on the basis of IR measurements is proposed. (author)

  19. Parameter extraction with neural networks

    Science.gov (United States)

    Cazzanti, Luca; Khan, Mumit; Cerrina, Franco

    1998-06-01

    In semiconductor processing, the modeling of the process is becoming more and more important. While the ultimate goal is that of developing a set of tools for designing a complete process (Technology CAD), it is also necessary to have modules to simulate the various technologies and, in particular, to optimize specific steps. This need is particularly acute in lithography, where the continuous decrease in CD forces the technologies to operate near their limits. In the development of a 'model' for a physical process, we face several levels of challenges. First, it is necessary to develop a 'physical model,' i.e. a rational description of the process itself on the basis of know physical laws. Second, we need an 'algorithmic model' to represent in a virtual environment the behavior of the 'physical model.' After a 'complete' model has been developed and verified, it becomes possible to do performance analysis. In many cases the input parameters are poorly known or not accessible directly to experiment. It would be extremely useful to obtain the values of these 'hidden' parameters from experimental results by comparing model to data. This is particularly severe, because the complexity and costs associated with semiconductor processing make a simple 'trial-and-error' approach infeasible and cost- inefficient. Even when computer models of the process already exists, obtaining data through simulations may be time consuming. Neural networks (NN) are powerful computational tools to predict the behavior of a system from an existing data set. They are able to adaptively 'learn' input/output mappings and to act as universal function approximators. In this paper we use artificial neural networks to build a mapping from the input parameters of the process to output parameters which are indicative of the performance of the process. Once the NN has been 'trained,' it is also possible to observe the process 'in reverse,' and to extract the values of the inputs which yield outputs

  20. Comparative exergy analyses of Jatropha curcas oil extraction methods: Solvent and mechanical extraction processes

    International Nuclear Information System (INIS)

    Ofori-Boateng, Cynthia; Keat Teong, Lee; JitKang, Lim

    2012-01-01

    Highlights: ► Exergy analysis detects locations of resource degradation within a process. ► Solvent extraction is six times exergetically destructive than mechanical extraction. ► Mechanical extraction of jatropha oil is 95.93% exergetically efficient. ► Solvent extraction of jatropha oil is 79.35% exergetically efficient. ► Exergy analysis of oil extraction processes allow room for improvements. - Abstract: Vegetable oil extraction processes are found to be energy intensive. Thermodynamically, any energy intensive process is considered to degrade the most useful part of energy that is available to produce work. This study uses literature values to compare the efficiencies and degradation of the useful energy within Jatropha curcas oil during oil extraction taking into account solvent and mechanical extraction methods. According to this study, J. curcas seeds on processing into J. curcas oil is upgraded with mechanical extraction but degraded with solvent extraction processes. For mechanical extraction, the total internal exergy destroyed is 3006 MJ which is about six times less than that for solvent extraction (18,072 MJ) for 1 ton J. curcas oil produced. The pretreatment processes of the J. curcas seeds recorded a total internal exergy destructions of 5768 MJ accounting for 24% of the total internal exergy destroyed for solvent extraction processes and 66% for mechanical extraction. The exergetic efficiencies recorded are 79.35% and 95.93% for solvent and mechanical extraction processes of J. curcas oil respectively. Hence, mechanical oil extraction processes are exergetically efficient than solvent extraction processes. Possible improvement methods are also elaborated in this study.

  1. RED WINE EXTRACT OBTAINED BY MEMBRANE-BASED SUPERCRITICAL FLUID EXTRACTION: PRELIMINARY CHARACTERIZATION OF CHEMICAL PROPERTIES.

    Directory of Open Access Journals (Sweden)

    W. Silva

    Full Text Available ABSTRACT This study aims to obtain an extract from red wine by using membrane-based supercritical fluid extraction. This technique involves the use of porous membranes as contactors during the dense gas extraction process from liquid matrices. In this work, a Cabernet Sauvignon wine extract was obtained from supercritical fluid extraction using pressurized carbon dioxide as solvent and a hollow fiber contactor as extraction setup. The process was continuously conducted at pressures between 12 and 18 MPa and temperatures ranged from 30 to 50ºC. Meanwhile, flow rates of feed wine and supercritical CO2 varied from 0.1 to 0.5 mL min-1 and from 60 to 80 mL min-1 (NCPT, respectively. From extraction assays, the highest extraction percentage value obtained from the total amount of phenolic compounds was 14% in only one extraction step at 18MPa and 35ºC. A summarized chemical characterization of the obtained extract is reported in this work; one of the main compounds in this extract could be a low molecular weight organic acid with aromatic structure and methyl and carboxyl groups. Finally, this preliminary characterization of this extract shows a remarkable ORAC value equal to 101737 ± 5324 µmol Trolox equivalents (TE per 100 g of extract.

  2. Language extraction from zinc sulfide

    Science.gov (United States)

    Varn, Dowman Parks

    2001-09-01

    Recent advances in the analysis of one-dimensional temporal and spacial series allow for detailed characterization of disorder and computation in physical systems. One such system that has defied theoretical understanding since its discovery in 1912 is polytypism. Polytypes are layered compounds, exhibiting crystallinity in two dimensions, yet having complicated stacking sequences in the third direction. They can show both ordered and disordered sequences, sometimes each in the same specimen. We demonstrate a method for extracting two-layer correlation information from ZnS diffraction patterns and employ a novel technique for epsilon-machine reconstruction. We solve a long-standing problem---that of determining structural information for disordered materials from their diffraction patterns---for this special class of disorder. Our solution offers the most complete possible statistical description of the disorder. Furthermore, from our reconstructed epsilon-machines we find the effective range of the interlayer interaction in these materials, as well as the configurational energy of both ordered and disordered specimens. Finally, we can determine the 'language' (in terms of the Chomsky Hierarchy) these small rocks speak, and we find that regular languages are sufficient to describe them.

  3. LIQUID-LIQUID EXTRACTION COLUMNS

    Science.gov (United States)

    Thornton, J.D.

    1957-12-31

    This patent relates to liquid-liquid extraction columns having a means for pulsing the liquid in the column to give it an oscillatory up and down movement, and consists of a packed column, an inlet pipe for the dispersed liquid phase and an outlet pipe for the continuous liquid phase located in the direct communication with the liquid in the lower part of said column, an inlet pipe for the continuous liquid phase and an outlet pipe for the dispersed liquid phase located in direct communication with the liquid in the upper part of said column, a tube having one end communicating with liquid in the lower part of said column and having its upper end located above the level of said outlet pipe for the dispersed phase, and a piston and cylinder connected to the upper end of said tube for applying a pulsating pneumatic pressure to the surface of the liquid in said tube so that said surface rises and falls in said tube.

  4. ECTOPIC LENS EXTRACTION IN CHILDREN

    Directory of Open Access Journals (Sweden)

    Vladimir Pfeifer

    2002-12-01

    Full Text Available Background. Ectopia lentis continues to be a therapeutic challenge for ophthalmologists. It can occur as an isolated condition, after ocular trauma, in association with other ocular disorders, as part of a systemic mesodermal disease or a complication of general metabolic disorders. Minimal subluxation of the lens may cause no visual symptoms, but in more advanced cases serious optical disturbances arise. The most important is amblyopia. Surgical treatment options include iris manipulation, lens discission, aspiration, intracapsular or extracapsular extraction, and pars plana lensectomy. The choice of surgical technique remains controversial, in part because of the historically poor visual results and high rate of perioperative complications, including vitreous loss and retinal detachment.Methods. We describe a surgical technique based on the use of the Cionni endocapsular tension ring, dry irrigation aspiration of lens material, centration of the capsular bag and foldable intraocular lens implantation into the bag. With mentioned surgical technique 8 patients were operated; 4 boys and 4 girls, together 11 eyes.Results. The final BCVA after follow up period improved in 9 eyes and it remained the same as before operation in one eye. Statistical comparison of preoperative and postoperative visual acuities showed significant improvement. On the other hand there was no correlation between preoperative and postoperative visual acuity.Conclusions. This surgical procedure is an alternative approach in solving this challenging cases of ectopia lentis with good postoperative visual rehabilitation.

  5. Extraction of Tetravalent Uranium by Certain Acidic Organophosphorus Extractants from Phosphate Medium

    International Nuclear Information System (INIS)

    Daoud, J.A.; Zeid, M.M.; Aly, H.F.

    1998-01-01

    The extraction of U(IV) by octylphenyl acid phosphate (OPAP) or di-2-ethylhexyl phosphoric acid (HDEHP) in kerosene from phosphoric acid was carried out. The effect of extractant, phosphoric acid, uranium, Fe(II) and Fe(III) concentration on the extraction process was separately investigated. The effect of different reagents and temperature on the stripping of U(IV) was also investigated. The results obtained for the extraction of U(IV) by HDEHP showed that the extraction with the increase in HDEHP and Fe(III) concentration while it decreases with the increase in phosphoric acid, uranium and Fe(II) concentration. In case of extraction with OPAP, the extraction of U(IV) was found to decrease with the phosphoric acid, Fe(II) and initial uranium concentration while the increase in OPAP concentration slightly affected the extraction. The use of high phosphoric acid concentration as stripper at low temperature was found to give the best stripping results

  6. Effective extractants for the extraction of lithium from aqueous solutions containing sodium and potassium compounds

    International Nuclear Information System (INIS)

    Marinkina, G.A.; Zanina, A.S.; Shergina, S.I.; Sokolov, I.E.; Kotlyarevskii, I.L.

    1992-01-01

    The extraction power of newly obtained pure methoxy-1,3-diketones in diluents and in their mixtures with electron-donating additives during the extraction of lithium from aqueous solutions containing sodium and potassium was investigated. High separation factors were obtained; no appreciable amounts of sodium and potassium were found in the extract after total extraction of the lithium. 9 refs., 2 figs., 8 tabs

  7. Sustainable extraction of molecules for human food, cosmetic and pharmaceutical products: extraction in supercritical fluids

    International Nuclear Information System (INIS)

    Leone, GianPaolo; Ferri, Donatella

    2015-01-01

    Since several years, the ENEA Innovation Laboratory for Agro-Industrial, proposed activities of research and development of extraction processes with supercritical fluids (SFE, Supercritical Fluid Extraction), focusing on sustainability characteristics of the process. The technique, in fact, makes no use of organic solvents, has a low energy consumption and requires a lower number of process steps compared to conventional extractions. The process also responds to the requirements imposed by the legislation for human food, cosmetic and pharmaceutical extracts. [it

  8. Sustainable extraction of molecules for potable alcohol, cosmetics and pharmaceuticals: extraction in supercritical fluids

    International Nuclear Information System (INIS)

    Leone, Gian Paolo; Ferri, Donatella

    2015-01-01

    Since many years the Laboratory of Agro-Industrial Innovation (UTAGRI-INN) ENEA proposed research and development of extraction processes with supercritical fluids (SFE, Supercritical Fluid Extraction), aiming on the sustainability of the process characteristics. The technique, in fact, makes no use of organic solvents, It has reduced energy consumption and requires a number of process step lower than the extractions traditional. The process also responds to the requirements required by the regulations for food use, cosmetics and pharmaceutical extracts. [it

  9. leaves extract on mild steel in acid

    African Journals Online (AJOL)

    ADOWIE PERE

    The volume of the cathodic hydrogen gas evolved was also plotted as a .... prevent the escape of hydrogen gas. The volume .... Clivia nobilis leaves extract on the flow of current ... behaviour of ethanol extract of Piper guinensis as a green ...

  10. Antifungal activity of olive cake extracts

    OpenAIRE

    Ghandi H. Anfoka; Khalil I. Al-Mughrabi; Talal A. Aburaj; Wesam Shahrour

    2001-01-01

    Powdered, dried olive (Olea europaea) cake was extracted with hexane, methanol and butanol. Six phenolic compounds, coumaric acid, ferulic acid, oleuropein, caffeic acid, protocatechuic acid and cinnamic acid, were isolated from these extracts after fractionation. The fractions were tested for their antifungal activity against Verticillium sp., Fusarium oxysporum, Rhizopus sp., Penicillium italicum, Rhizoctonia solani, Stemphylium solani, Cladosporium sp., Mucor sp., Colletotrichu...

  11. 21 CFR 73.30 - Annatto extract.

    Science.gov (United States)

    2010-04-01

    ... fats. The alkaline alcohol or aqueous extracts may be treated with food-grade acids to precipitate..., methyl alcohol, methylene chloride, trichloroethylene. (2) Color additive mixtures for food use made with... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Annatto extract. 73.30 Section 73.30 Food and...

  12. Automated extraction of DNA from clothing

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Hjort, Benjamin Benn; Nøhr Hansen, Thomas

    2011-01-01

    Presence of PCR inhibitors in extracted DNA may interfere with the subsequent quantification and short tandem repeat (STR) reactions used in forensic genetic DNA typing. We have compared three automated DNA extraction methods based on magnetic beads with a manual method with the aim of reducing...

  13. Batch extractive distillation for high purity methanol

    International Nuclear Information System (INIS)

    Zhang Weijiang; Ma Sisi

    2006-01-01

    In this paper, the application in chemical industry and microelectronic industry, market status and the present situation of production of high purity methanol at home and abroad were introduced firstly. Purification of industrial methanol for high purity methanol is feasible in china. Batch extractive distillation is the best separation technique for purification of industrial methanol. Dimethyl sulfoxide was better as an extractant. (authors)

  14. Fingerprint Minutiae Extraction using Deep Learning

    CSIR Research Space (South Africa)

    Darlow, Luke Nicholas

    2017-10-01

    Full Text Available components, such as image enhancement. We pose minutiae extraction as a machine learning problem and propose a deep neural network – MENet, for Minutiae Extraction Network – to learn a data-driven representation of minutiae points. By using the existing...

  15. Ion Beam Extraction by Discrete Ion Focusing

    DEFF Research Database (Denmark)

    2010-01-01

    An apparatus (900) and methods are disclosed for ion beam extraction. In an implementation, the apparatus includes a plasma source (or plasma) (802) and an ion extractor (804). The plasma source is adapted to generate ions and the ion extractor is immersed in the plasma source to extract a fracti...

  16. ( Asteraceae ) methanol extracts against Helicobacter pylori

    African Journals Online (AJOL)

    Methanol vehicle did not affect H. pylori growth. Conclusion: The observed antibacterial effect of G. glutinosum extracts may be of benefit as an adjuvant treatment of diseases caused by H. pylori. Key words: Gymnosperma glutinosum, Helicobacter pylori, methanol extract, minimal inhibitory concentration (MIC).

  17. Idioms-based Business Rule Extraction

    NARCIS (Netherlands)

    R Smit (Rob)

    2011-01-01

    htmlabstractThis thesis studies the extraction of embedded business rules, using the idioms of the used framework to identify them. Embedded business rules exist as source code in the software system and knowledge about them may get lost. Extraction of those business rules could make them accessible

  18. Immunostimulant activity of standardised extracts of Mangifera ...

    African Journals Online (AJOL)

    Purpose: To investigate the immunomodulating activity of Mangifera indica. (MI) and Curcuma domestica (CD) extracts in mice. Methods: Mice were randomly divided into 4 groups, namely, vehicle, untreated, MI and CD groups (n = 6). They were treated with MI (160 mg/kg) or CD (200 mg/kg) extracts, and vehicle for control ...

  19. Gold and Silver Extraction from Leach Solutions

    OpenAIRE

    Bagdaulet K. Kenzhaliyev; Renata R. Iskhakova; Zamzagul D. Dosymbaeva; Esen N. Sulejmenov

    2014-01-01

    There has been carried out an investigation on the extraction of gold and silver from thiosulfate solutions: standard test and technological solutions of chemical and electrochemical leaching. The influence of related metals on the process of extracting gold from solution was studied. There has been conducted a comparative study of the IR spectra of solutions after the sorption of gold, silver and related metals.

  20. Mastering aesthetics in post-extraction sites

    NARCIS (Netherlands)

    Goené, R.J.; van Daelen, A.C.L.

    2013-01-01

    Patients increasingly seek implant-supported restorations that can be delivered as quickly and non-invasively as possible. Many also prefer to avoid wearing a removable prothesis after tooth extraction. Implants that are placed immediately in fresh extraction sockets and provisionalized immediately

  1. Extraction, Isolation And Characterization Of Bioactive Compounds ...

    African Journals Online (AJOL)

    Natural products from medicinal plants, either as pure compounds or as standardized extracts, provide unlimited opportunities for new drug leads because of the ... The analysis of bioactive compounds present in the plant extracts involving the applications of common phytochemical screening assays, chromatographic ...

  2. The extractives of Pinus pinaster wood

    Science.gov (United States)

    Richard W. Hemingway; W. E. Hillis; L. S. Lau

    1973-01-01

    The extractives in Pinus pinaster wood grown in South Australia were examined as part of an assessment of the suitability of this wood for manufacture of absorbent tissues from bisulphite pulps. The average petroleum solubility of the wood was 2.0% but the amount and composition of the petroleum extract varied widely depending upon the age of the...

  3. Extraction of molybdenum VI by alpha benzoinoxime

    International Nuclear Information System (INIS)

    Achache, M.; Meklati, M.

    1990-06-01

    The concentration of molybdenum, was studied using alpha benzoinoxime dissolved in chloroform. Several acids and salt at different levels of concentration were investigated as well as other parameters such as (mixing time, extractant to metal ratio, temperature etc.) The molybdenum stippling was also studied in alkaline medium with the subsequent recovery of the extractant and solvent

  4. Extraction optimization and characterization of polysaccharide ...

    African Journals Online (AJOL)

    Purpose: To investigate the optimum extraction conditions of polysaccharides from Pinellia Rhizoma (PRP) and their antioxidant activities. Methods: Response surface methodology (RSM) was applied to optimize the water extraction conditions of PRP by Box-Benhnken design (BBD). A high performance liquid ...

  5. Lipase and protease extraction from activated sludge

    DEFF Research Database (Denmark)

    Gessesse, Amare; Dueholm, Thomas; Petersen, Steffen B.

    2003-01-01

    of gentle and efficient enzyme extraction methods from environmental samples is very important. In this study we present a method for the extraction of lipases and proteases from activated sludge using the non-ionic detergent Triton X-100, EDTA, and cation exchange resin (CER), alone or in combination...

  6. Comparative antitrypanosomal screening of methanolic extracts of ...

    African Journals Online (AJOL)

    The in vitro and in vivo activities of methanolic extracts of defatted leaves and stems of Khaya senegalensis and Moringa oleifera on Trypanosoma brucei brucei were investigated and compared. The in vitro assessment involved incubating the parasite (in triplicate) in the presence of various extract concentrations in a ...

  7. EXTRACT OF COMBRETUM MICRANTHUM AS CORROSION ...

    African Journals Online (AJOL)

    user

    2016-10-04

    Oct 4, 2016 ... methanol extract CM is a good adsorption inhibitor for the corrosion of Al-Si-Mg in 3.5wt% NaCl solution. Tafel polarization analysis indicates that the studied plant extract is a mixed ..... (2008). [2] Shreir, L. L., Jarman, R. A. and Burstein, G. T.. Corrosion ... [6] Maqsood Ahmad Malik, Mohammad Ali Hashim,.

  8. Data extraction from proteomics raw data

    DEFF Research Database (Denmark)

    Mancuso, Francesco; Bunkenborg, Jakob; Wierer, Michael

    2012-01-01

    In shot-gun proteomics raw tandem MS data are processed with extraction tools to produce condensed peak lists that can be uploaded to database search engines. Many extraction tools are available but to our knowledge, a systematic comparison of such tools has not yet been carried out. Using raw data...

  9. Leaf Extract Of Anacardium occidentale on Gastric

    African Journals Online (AJOL)

    Chigo Okwuosa

    Keywords; Anacardium occidentale, aqueous extract, gastric acid secretion, rats, intragastric. *Address for correspondence: . esajibola@yahoo.com. Revised version accepted: March 2010. INTRODUCTION. The plant, Anacardium occidentale. L belongs to the. Family; Anacardiaceae. It is popularly called cashew. Extracts ...

  10. ANXIOLYTIC ACTIVITY OF OCIMUM SANCTUM LEAF EXTRACT

    OpenAIRE

    Chattopadhyay, R.R.

    1994-01-01

    The anxiolytic activity of Ocimum sanctum leaf extract was studied in mice. O.sanctum leaf extract produced significant anxiolytic activity in plus – maze and open field behaviour test models. The effect was compared with diazepam, a standard antianxiety drug.

  11. Reactive extraction of lactic acid using alamine

    NARCIS (Netherlands)

    Wasewar, Kailas L.; Heesink, Albertus B.M.; Versteeg, Geert; Pangarkar, Vishwas G.

    2002-01-01

    Lactic acid is an important commercial product and extracting it out of aqueous solution is a growing requirement in fermentation based industries and recovery from waste streams. The design of an amine extraction process requires (i) equilibrium and (ii) kinetic data for the acid–amine (solvent)

  12. DNA Extraction Techniques for Use in Education

    Science.gov (United States)

    Hearn, R. P.; Arblaster, K. E.

    2010-01-01

    DNA extraction provides a hands-on introduction to DNA and enables students to gain real life experience and practical knowledge of DNA. Students gain a sense of ownership and are more enthusiastic when they use their own DNA. A cost effective, simple protocol for DNA extraction and visualization was devised. Buccal mucosal epithelia provide a…

  13. Anethum Graveolens Linn (Umbelliferae) Extract Attenuates Stress ...

    African Journals Online (AJOL)

    Anethum Graveolens Linn (Umbelliferae) Extract Attenuates Stress-induced Urinary Biochemical Changes and Improves Cognition in Scopolamineinduced Amnesic Rats. ... Conclusion: The aqueous extract of A. graveolens exhibited significant anti-stress, antioxidant and memory enhancing activities. The study provides a ...

  14. Recent patents on the extraction of carotenoids.

    Science.gov (United States)

    Riggi, Ezio

    2010-01-01

    This article reviews the patents that have been presented during the last decade related to the extraction of carotenoids from various forms of organic matter (fruit, vegetables, animals), with an emphasis on the methods and mechanisms exploited by these technologies, and on technical solutions for the practical problems related to these technologies. I present and classify 29 methods related to the extraction processes (physical, mechanical, chemical, and enzymatic). The large number of processes for extraction by means of supercritical fluids and the growing number of large-scale industrial plants suggest a positive trend towards using this technique that is currently slowed by its cost. This trend should be reinforced by growing restrictions imposed on the use of most organic solvents for extraction of food products and by increasingly strict waste management regulations that are indirectly promoting the use of extraction processes that leave the residual (post-extraction) matrix substantially free from solvents and compounds that must subsequently be removed or treated. None of the reviewed approaches is the best answer for every extractable compound and source, so each should be considered as one of several alternatives, including the use of a combination of extraction approaches.

  15. Bibliography of extraction chromatography, ch. 15

    International Nuclear Information System (INIS)

    Eschrich, H.; Drent, W.

    1975-01-01

    A bibliography of reviews, books and publications dealing with laminar extraction chromatography is given. A tabular survey of experimental data on column extraction chromatographic investigations, stationary phases and support materials is presented. An author index and corporative author index are included. This bibliography refers to various publications relevant to nuclear interest

  16. Extraction Techniques for Polycyclic Aromatic Hydrocarbons in Soils

    Science.gov (United States)

    Lau, E. V.; Gan, S.; Ng, H. K.

    2010-01-01

    This paper aims to provide a review of the analytical extraction techniques for polycyclic aromatic hydrocarbons (PAHs) in soils. The extraction technologies described here include Soxhlet extraction, ultrasonic and mechanical agitation, accelerated solvent extraction, supercritical and subcritical fluid extraction, microwave-assisted extraction, solid phase extraction and microextraction, thermal desorption and flash pyrolysis, as well as fluidised-bed extraction. The influencing factors in the extraction of PAHs from soil such as temperature, type of solvent, soil moisture, and other soil characteristics are also discussed. The paper concludes with a review of the models used to describe the kinetics of PAH desorption from soils during solvent extraction. PMID:20396670

  17. Extraction Techniques for Polycyclic Aromatic Hydrocarbons in Soils

    Directory of Open Access Journals (Sweden)

    E. V. Lau

    2010-01-01

    Full Text Available This paper aims to provide a review of the analytical extraction techniques for polycyclic aromatic hydrocarbons (PAHs in soils. The extraction technologies described here include Soxhlet extraction, ultrasonic and mechanical agitation, accelerated solvent extraction, supercritical and subcritical fluid extraction, microwave-assisted extraction, solid phase extraction and microextraction, thermal desorption and flash pyrolysis, as well as fluidised-bed extraction. The influencing factors in the extraction of PAHs from soil such as temperature, type of solvent, soil moisture, and other soil characteristics are also discussed. The paper concludes with a review of the models used to describe the kinetics of PAH desorption from soils during solvent extraction.

  18. Indium extraction by an acidic extractant associated or not with synergetic agents: importance of inorganic anions

    International Nuclear Information System (INIS)

    Goetz-Grandmont, G.; Taheri, M.; Brunette, J.P.; Leroy, M.J.F.

    1985-01-01

    Thermodynamic data are presented for indium extraction from low acidity media (pH value between 1 and 4) and at low concentration by a chelating extractant alone or associated to a solvatant or a lipophylic ammonium salt. Modifications in the nature and/or concentration of inorganic anions can transform the extraction process and allow to change metal distribution between phases [fr

  19. ANTIOXIDANT ACTIVITY, TOTAL PHENOLIC AND FLAVONOID CONTENT OF MORINDA CITRIFOLIA FRUIT EXTRACTS FROM VARIOUS EXTRACTION PROCESSES

    Directory of Open Access Journals (Sweden)

    PRAVEEN K. RAMAMOORTHY

    2007-04-01

    Full Text Available Soxhlet, Ultrasonic extract of Morinda citrifolia L. fruit and four extracts from high pressure extraction at 10 MPa using ethanol, ethyl acetate as solvent and dried by vacuum oven and spray dryer were analyzed for their antioxidant activity by peroxide value method and diphenylpicrylhydrazyl radical scavenging method. The five extracts along with the reference samples, butylated hydroxyl toluene and tannic acid were further analyzed to determine their total phenolic content by Folin-Ciocalteau method and total flavonoid content by Dowd method. The M. citrifolia extract by high pressure extraction with ethyl acetate as solvent and spray dried was found to exhibit highest antioxidant activity and total flavonoid content. High total phenolic content was determined in the high pressure extract using ethyl acetate as solvent and vacuum dried. It was interesting to note that ultrasonic extract exhibited significant antioxidant activity, total phenolic and flavonoid content. High pressure extracted M. citrifolia in ethanol was found to express lesser values comparatively. The significant difference in activity among the high pressure extracts was found to be due to the polarity of the solvents used for extraction as M. citrifolia fruit contains relatively larger quantity of non-polar antioxidant compounds. It was also found that the drying methods had significant impact on the antioxidant activity, total phenolic and flavonoid content of the extracts.

  20. Natural colorants: Pigment stability and extraction yield enhancement via utilization of appropriate pretreatment and extraction methods.

    Science.gov (United States)

    Ngamwonglumlert, Luxsika; Devahastin, Sakamon; Chiewchan, Naphaporn

    2017-10-13

    Natural colorants from plant-based materials have gained increasing popularity due to health consciousness of consumers. Among the many steps involved in the production of natural colorants, pigment extraction is one of the most important. Soxhlet extraction, maceration, and hydrodistillation are conventional methods that have been widely used in industry and laboratory for such a purpose. Recently, various non-conventional methods, such as supercritical fluid extraction, pressurized liquid extraction, microwave-assisted extraction, ultrasound-assisted extraction, pulsed-electric field extraction, and enzyme-assisted extraction have emerged as alternatives to conventional methods due to the advantages of the former in terms of smaller solvent consumption, shorter extraction time, and more environment-friendliness. Prior to the extraction step, pretreatment of plant materials to enhance the stability of natural pigments is another important step that must be carefully taken care of. In this paper, a comprehensive review of appropriate pretreatment and extraction methods for chlorophylls, carotenoids, betalains, and anthocyanins, which are major classes of plant pigments, is provided by using pigment stability and extraction yield as assessment criteria.

  1. Supercritical CO2 extraction of raw propolis and its dry ethanolic extract

    Directory of Open Access Journals (Sweden)

    L. C. Paviani

    2012-06-01

    Full Text Available Three types of propolis extract were prepared and analyzed with respect to their global extraction yields and with respect to the concentration of the following markers: 3,5-diprenyl-4-hydroxycinnamic acid; 3-prenyl-4-hydroxycinnamic acid; 4-hydroxycinnamic acid and 4-methoxy-3,5,7-trihydroxyflavone. The extract EEP (ethanolic extract of propolis was obtained by the conventional method from raw propolis using ethanol as solvent. The extracts (SFE were obtained by supercritical solvent extraction from the raw propolis using supercritical carbon dioxide (sc-CO2, with and without the addition of ethanol as a co-solvent. The fractionated supercritical extracts (FSCE were obtained by fractionation (extract and raffinate of the dry EEP with sc-CO2. EEP yields of 39.5% were obtained and maximum global extraction yields were 7.3% for SFE with no co-solvent, 51% for SFE with 15% ethanol and 18% for the FSCE extract fraction. The concentrations of the markers in the different extracts differed as a function of the operational parameters, indicating that the addition of co-solvent and the selectivity of sc-CO2 could be manipulated so as to obtain extracts with the yields and concentrations of interest.

  2. Ultraviolet light assisted extraction of flavonoids and allantoin from aqueous and alcoholic extracts of Symphytum officinale

    Directory of Open Access Journals (Sweden)

    Marwan S.M. Al-Nimer

    2017-09-01

    Conclusions: UV-radiation enhances the yields of active ingredient, of comfrey extracted with methanol whereas improves the flavonoids, reducing power and allantoin levels of comfrey extracted by the aqueous infusion method. UV-radiation reduces the levels of flavonoids, reducing power and allantoin when the comfrey extracted by alcohols [J Complement Med Res 2017; 6(3.000: 280-283

  3. Data Extraction Based on Page Structure Analysis

    Directory of Open Access Journals (Sweden)

    Ren Yichao

    2017-01-01

    Full Text Available The information we need has some confusing problems such as dispersion and different organizational structure. In addition, because of the existence of unstructured data like natural language and images, extracting local content pages is extremely difficult. In the light of of the problems above, this article will apply a method combined with page structure analysis algorithm and page data extraction algorithm to accomplish the gathering of network data. In this way, the problem that traditional complex extraction model behave poorly when dealing with large-scale data is perfectly solved and the page data extraction efficiency is also boosted to a new level. In the meantime, the article will also make a comparison about pages and content of different types between the methods of DOM structure based on the page and HTML regularities of distribution. After all of those, we may find a more efficient extract method.

  4. Virgin almond oil: Extraction methods and composition

    Energy Technology Data Exchange (ETDEWEB)

    Roncero, J.M.; Alvarez-Orti, M.; Pardo-Gimenez, A.; Gomez, R.; Rabadan, A.; Pardo, J.E.

    2016-07-01

    In this paper the extraction methods of virgin almond oil and its chemical composition are reviewed. The most common methods for obtaining oil are solvent extraction, extraction with supercritical fluids (CO2) and pressure systems (hydraulic and screw presses). The best industrial performance, but also the worst oil quality is achieved by using solvents. Oils obtained by this method cannot be considered virgin oils as they are obtained by chemical treatments. Supercritical fluid extraction results in higher quality oils but at a very high price. Extraction by pressing becomes the best option to achieve high quality oils at an affordable price. With regards chemical composition, almond oil is characterized by its low content in saturated fatty acids and the predominance of monounsaturated, especially oleic acid. Furthermore, almond oil contains antioxidants and fat-soluble bioactive compounds that make it an oil with interesting nutritional and cosmetic properties.

  5. Research for actinides extractants from various wastes

    International Nuclear Information System (INIS)

    Musikas, C.; Cuillerdier, C.; Condamines, N.

    1990-01-01

    This paper is an overview of the actinides solvent extraction research undertaken in Fontenay-aux-Roses. Two kinds of extractants are investigated; those usable for the improvement of the nowadays nuclear fuels reprocessing and those necessary for advanced fuels cycles which include the minor actinides (Np, Am) recovery for a further elimination through nuclear reactions. In the first class the mono and diamides, alternative to the organophosphorus extractants, TBP and polyfunctional phosphonates, showed promising properties. The main results are discussed. For the future efficient extractants for trivalent actinides-lanthanides group separations are suitable. The point about the actinides (III) - lanthanides (III) group separation chemistry and the development of some of these extractants are given

  6. Audio feature extraction using probability distribution function

    Science.gov (United States)

    Suhaib, A.; Wan, Khairunizam; Aziz, Azri A.; Hazry, D.; Razlan, Zuradzman M.; Shahriman A., B.

    2015-05-01

    Voice recognition has been one of the popular applications in robotic field. It is also known to be recently used for biometric and multimedia information retrieval system. This technology is attained from successive research on audio feature extraction analysis. Probability Distribution Function (PDF) is a statistical method which is usually used as one of the processes in complex feature extraction methods such as GMM and PCA. In this paper, a new method for audio feature extraction is proposed which is by using only PDF as a feature extraction method itself for speech analysis purpose. Certain pre-processing techniques are performed in prior to the proposed feature extraction method. Subsequently, the PDF result values for each frame of sampled voice signals obtained from certain numbers of individuals are plotted. From the experimental results obtained, it can be seen visually from the plotted data that each individuals' voice has comparable PDF values and shapes.

  7. Antimicrobial screening of Cichorium intybus seed extracts

    Directory of Open Access Journals (Sweden)

    Tauseef shaikh

    2016-11-01

    Full Text Available Medicinal plants play an important role in the field of natural products and human health care system. Chemical constituents present in the various parts of the plants can resist to parasitic attack by using several defense mechanisms. One such mechanism is the synthesis of antimicrobial compound. Cichorium intybus is one of the important medicinal plants which belong to Asteraceae family. In the present work, antimicrobial screening of C. intybus seed extract was studied by agar well diffusion assay by using aqueous and organic extracts. The pathogenic microorganisms tested include Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans and Escherichia coli. All the seed extracts showed antimicrobial activity against tested microorganisms whereas S. aureus was found to be most sensitive against aqueous extract and had the widest zone of inhibition. Ethyl acetate and ethanol extract were found to be significant against P. aeruginosa and S. aureus. The results obtained from antimicrobial screening scientifically support the effectiveness of the medicinal plant.

  8. Virgin almond oil: Extraction methods and composition

    International Nuclear Information System (INIS)

    Roncero, J.M.; Alvarez-Orti, M.; Pardo-Gimenez, A.; Gomez, R.; Rabadan, A.; Pardo, J.E.

    2016-01-01

    In this paper the extraction methods of virgin almond oil and its chemical composition are reviewed. The most common methods for obtaining oil are solvent extraction, extraction with supercritical fluids (CO2) and pressure systems (hydraulic and screw presses). The best industrial performance, but also the worst oil quality is achieved by using solvents. Oils obtained by this method cannot be considered virgin oils as they are obtained by chemical treatments. Supercritical fluid extraction results in higher quality oils but at a very high price. Extraction by pressing becomes the best option to achieve high quality oils at an affordable price. With regards chemical composition, almond oil is characterized by its low content in saturated fatty acids and the predominance of monounsaturated, especially oleic acid. Furthermore, almond oil contains antioxidants and fat-soluble bioactive compounds that make it an oil with interesting nutritional and cosmetic properties.

  9. Antimicrobial Effect of Extracts of Cruciferous Vegetables

    Directory of Open Access Journals (Sweden)

    Shu-Hui Hu

    2004-12-01

    Full Text Available The cruciferous vegetables cauliflower, broccoli, cabbage, Chinese radish, Chinese kale, and Chinese kitam were used in this study to prepare water-soluble and methanol-water extracts. Crude protein extracts were also obtained by diethylaminoethyl (DEAE anion exchange chromatography. Water-soluble polysaccharides were prepared by ethanol precipitation followed by ultrafiltration. The antimicrobial effects of all these extracts were evaluated against Gram-positive bacteria, Gram-negative bacteria, and yeast. Crude protein extracts exhibited the greatest antimicrobial activity in monoculture experiments. The antimicrobial effects of cruciferous vegetables were also studied by steeping beef, carrot, and celery in chlorine (10 ppm or citric acid solution (1% containing the crude protein extract (500 ppm for different time periods. Total aerobic plate counts and coliform counts on these foods decreased significantly after 10 minutes in all steeping solutions (p < 0.05.

  10. Biomechanical considerations in mandibular incisor extraction cases.

    Science.gov (United States)

    Rachala, Madhukar Reddy; Aileni, Kaladhar Reddy; Dasari, Arun Kumar; Sinojiya, Jay

    2015-01-01

    Mandibular incisor extraction can be regarded as a valuable treatment option in certain malocclusions to obtain excellence in orthodontic results in terms of function, aesthetics and stability. This treatment alternative is indicated in clinical situations like mild to moderate class III malocclusion, mild anterior mandibular tooth size excess, periodontally compromised teeth, ectopic eruption of mandibular incisor and minimal openbite tendencies. Unlike in premolar extraction cases, space closure in mandibular incisor extraction cases is unique in which the extraction space will be in the middle of the arch. The end result of space closure in these cases should be well aligned, upright, anterior teeth with parallel roots and the goal can be achieved with the bodily tooth movement through proper application of biomechanics. The purpose of this article is to explain the biomechanics of space closure in mandibular incisor extraction cases.

  11. Rapid extraction of PCDD/Fs from soil and fly ash samples. Pressurized fluid extraction (PFE) and microwave-assisted extraction (MAE)

    Energy Technology Data Exchange (ETDEWEB)

    Sanz, P.; Fabrellas, B. [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT), Madrid (Spain)

    2004-09-15

    The main reference extraction method in the analysis of polychlorinated dibenzop- dioxins and dibenzofurans (PCDD/Fs) is still the Soxhlet extraction. But it requires long extraction times (up to 24 hs), large volumes of hazardous organic solvents (100-300 ml) and its automation is limited. Pressurized Fluid Extraction (PFE) and Microwave-Assisted Extraction (MAE) are two relatively new extraction techniques that reduce the time and the volume of solvent required for extraction. However, very different PFE extraction conditions are found for the same enviromental matrices in the literature. MAE is not a extraction technique very applied for the analysis of PCDD/Fs yet, although it is used for the determination of other organic compounds, such as PCBs and PAHs. In this study, PFE and MAE extraction conditions were optimized to determine PCDDs y PCDFs in fly ash and soil/sediment samples. Conventional Soxhlet extraction with toluene was used to compare the extraction efficiency of both techniques.

  12. Extraction of bioactive carbohydrates from artichoke (Cynara scolymus L.) external bracts using microwave assisted extraction and pressurized liquid extraction.

    Science.gov (United States)

    Ruiz-Aceituno, Laura; García-Sarrió, M Jesús; Alonso-Rodriguez, Belén; Ramos, Lourdes; Sanz, M Luz

    2016-04-01

    Microwave assisted extraction (MAE) and pressurized liquid extraction (PLE) methods using water as solvent have been optimized by means of a Box-Behnken and 3(2) composite experimental designs, respectively, for the effective extraction of bioactive carbohydrates (inositols and inulin) from artichoke (Cynara scolymus L.) external bracts. MAE at 60 °C for 3 min of 0.3 g of sample allowed the extraction of slightly higher concentrations of inositol than PLE at 75 °C for 26.7 min (11.6 mg/g dry sample vs. 7.6 mg/g dry sample). On the contrary, under these conditions, higher concentrations of inulin were extracted with the latter technique (185.4 mg/g vs. 96.4 mg/g dry sample), considering two successive extraction cycles for both techniques. Both methodologies can be considered appropriate for the simultaneous extraction of these bioactive carbohydrates from this particular industrial by-product. To the best of our knowledge this is the first time that these techniques are applied for this purpose. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Comparison of different strategies for soybean antioxidant extraction.

    Science.gov (United States)

    Chung, Hyun; Ji, Xiangming; Canning, Corene; Sun, Shi; Zhou, Kequan

    2010-04-14

    Three extraction strategies including Soxhlet extraction, conventional solid-liquid extraction, and ultrasonic-assisted extraction (UAE) were compared for their efficiency to extract phenolic antioxidants from Virginia-grown soybean seeds. Five extraction solvents were evaluated in UAE and the conventional extraction. The soybean extracts were compared for their total phenolic contents (TPC), oxygen radical absorbance capacity (ORAC), and 2,2-diphenyl-1-picrylhydrazyl radical (DPPH(*)) scavenging activities. The results showed that UAE improved the extraction of soybean phenolic compounds by >54% compared to the conventional and Soxhlet extractions. Among the tested solvents, 50% acetone was the most efficient for extracting soybean phenolic compounds. There was no significant correlation between the TPC and antioxidant activities of the soybean extracts. The extracts prepared by 70% ethanol had the highest ORAC values. Overall, UAE with 50% acetone or 70% ethanol is recommended for extracting soybean antioxidants on the basis of the TPC and ORAC results.

  14. Comparative synergistic (technetium-actinide) extraction chemistry by tributylphosphate and some amide extractants

    International Nuclear Information System (INIS)

    Condamines, N.; Musikas, C.

    1993-01-01

    In nuclear fuel reprocessing, technetium (TcO 4 - ) leads to bad interferences in the extractions, being synergistically co-extracted with different actinide cations as Uranium (VI), Plutonium (IV) and Zirconium (IV). It destroys the hydrazine in the reductive partition of U and Pu, it decreases the decontamination of U and Pu from fission products. Thus, its extraction behaviour with new extractants as N,N-diakylamides is useful to be known. TcO 4 - extraction in nitric acid media is compared for TBP and different amides. The influence of nitric acidity is related to the amides formula

  15. Extraction of Glycyrrhizic Acid from Glycyrrhiza uralensis Using Ultrasound and Its Process Extraction Model

    Directory of Open Access Journals (Sweden)

    Jiangqing Liao

    2016-10-01

    Full Text Available This work focused on the intensification of extraction process of glycyrrhizic acid (GA from Glycyrrhiza uralensis using ultrasound-assisted extraction (UAE method. Various process parameters such as ultrasonic power, ultrasonic frequency, extraction temperature, and extraction time which affect the extraction yield were optimized. The results showed that all process parameters had exhibited significant influences on the GA extraction. The highest GA yield of 217.7 mg/g was obtained at optimized parameters of 125 W, 55 kHz, 25 °C, and 10 min. Furthermore, the extraction kinetics model of this process was also investigated based on Fick’s first law available in the literature. Kinetic parameters such as equilibrium concentration (Ce and integrated influence coefficient (λ for different ultrasonic powers, ultrasonic frequencies, and extraction temperatures were predicted. Model validations were done successfully with the average of relative deviation between 0.96% and 4.36% by plotting experimental and predicted values of concentration of GA in extract. This indicated that the developed extraction model could reflect the effectiveness of the extraction of GA from Glycyrrhiza uralensis and therefore serve as the guide for comprehending other UAE process.

  16. Selective and Efficient Solvent Extraction of Copper(II Ions from Chloride Solutions by Oxime Extractants

    Directory of Open Access Journals (Sweden)

    Zahra Kaboli Tanha

    2016-06-01

    Full Text Available Oxime extractants 3-tert-butyl-2-hydroxy-5-methyl benzaldehyde oxime (HL1 and 3-tert-butyl-2-hydroxy-5-methoxy benzaldehyde oxime (HL2 were synthesized and characterized by conventional spectroscopic methods. Suitable lipophilic nature of the prepared extractants allowed examining the ability of these molecules for extraction-separation of copper from its mixture with normally associated metal ions by performing competitive extraction experiments of Cu(II, Co(II, Ni(II, Zn(II, Cd(II and Pb(II ions from chloride solutions. Both ligands transfer selectively the copper ions into dichloromethane by a cation exchange mechanism. Conventional log-log analysis and isotherm curves showed that Cu(II ions are extracted as the complexes with 1:2 metal to ligand ratio by both extractants. Verification of the effect of the organic diluent used in the extraction of copper ions by HL1 and HL2 demonstrated that the extraction efficiency varies as: dichloromethane ~ dichloroethane > toluene > xylene > ethylacetate. Time dependency investigation of the extraction processes revealed that the kinetics of the extraction of copper by HL2 is more rapid than that of HL1. The application of the ligands for extraction-separation of copper ions from leach solutions of cobalt and nickel-cadmium filter-cakes of a zinc production plants was evaluated.

  17. Enzyme assisted extraction of biomolecules as an approach to novel extraction technology: A review.

    Science.gov (United States)

    Nadar, Shamraja S; Rao, Priyanka; Rathod, Virendra K

    2018-06-01

    An interest in the development of extraction techniques of biomolecules from various natural sources has increased in recent years due to their potential applications particularly for food and nutraceutical purposes. The presence of polysaccharides such as hemicelluloses, starch, pectin inside the cell wall, reduces the extraction efficiency of conventional extraction techniques. Conventional techniques also suffer from low extraction yields, time inefficiency and inferior extract quality due to traces of organic solvents present in them. Hence, there is a need of the green and novel extraction methods to recover biomolecules. The present review provides a holistic insight to various aspects related to enzyme aided extraction. Applications of enzymes in the recovery of various biomolecules such as polyphenols, oils, polysaccharides, flavours and colorants have been highlighted. Additionally, the employment of hyphenated extraction technologies can overcome some of the major drawbacks of enzyme based extraction such as longer extraction time and immoderate use of solvents. This review also includes hyphenated intensification techniques by coupling conventional methods with ultrasound, microwave, high pressure and supercritical carbon dioxide. The last section gives an insight on application of enzyme immobilization as a strategy for large scale extraction. Immobilization of enzymes on magnetic nanoparticles can be employed to enhance the operational performance of the system by multiple use of expensive enzymes making them industrially and economically feasible. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Evaluation of urinary cortisol excretion by radioimmunoassay through two methods (extracted and non-extracted)

    International Nuclear Information System (INIS)

    Fonte Kohek, M.B. da; Mendonca, B.B. de; Nicolau, W.

    1993-01-01

    The objective of this paper is to compare the feasibility, sensitivity and specificity of both methods (extracted versus non-extracted) in the hypercortisolism diagnosis. It used Gamma Coat 125 cortisol Kit provided by Clinical Assays, Incstar, USA, for both methods extracting it with methylene chloride in order to measure the extracted cortisol. It was performed 32 assays from which it was obtained from 0.1 to 0.47 u g/d l of sensitivity. The intra-run precision was varied from 8.29 +- 3.38% and 8.19 +-4.72% for high and low levels, respectively for non-extracted cortisol, and 9.72 +- 1.94% and 9.54 +- 44% for high and low levels, respectively, for extracted cortisol. The inter-run precision was 15.98% and 16.15% for high level of non-extracted cortisol, respectively. For the low level it obtained 17.25% and 18.59% for non-extracted and extracted cortisol respectively. It was evaluated 24-hour urine basal samples from 43 normal subjects, and 53 obese (body mass index > 30) and 53 Cushing's syndrome patients. The sensitivity of the methods were similar (100% and 98.1% for non-extracted and extracted methods, respectively) and the specificity was the same for both methods (100%). It was noticed a positive correlation between the two methods in all the groups studied (p s syndrome. (author)

  19. Potential of mangrove Avicennia rumphiana extract as an antioxidant agent using multilevel extraction

    Science.gov (United States)

    Sulmartiwi, L.; Pujiastuti, D. Y.; Tjahjaningsih, W.; Jariyah

    2018-04-01

    Avicennia rumphiana is one of abundant mangrove found in Indonesia. Multilevel extraction methods were simultaneously conducted to screen the antioxidant activity from mangrove. The leaves, fruits and barks were consequently extracted using n-hexane, ethyl acetate and ethanol. The presence of phenolic, flavonoids and tannins compounds were characterized by quantitative and qualitative phytochemical assay as well as the antioxidant activity was examined using DPPH-free radical scavenging assay. The phytochemical test revealed that all of the extracts showed positive result. The fruits extract exhibited the highest phenolic, flavonoid and tannin (23.86 mg/g, 13.77 mg/g and 74.63 mg/g), respectively. The extracts were further confirmed for antioxidant using IC50 value and revealed that ethyl acetate extract has antioxidant activity better than n-hexane and ethyl acetate extract. Furthermore, this study indicated that mangrove Avicennia rumphiana could be subsequently explored for other biological activities due to their potential secondary metabolites.

  20. Development of pressurised hot water extraction (PHWE) for essential compounds from Moringa oleifera leaf extracts.

    Science.gov (United States)

    Matshediso, Phatsimo G; Cukrowska, Ewa; Chimuka, Luke

    2015-04-01

    Pressurised hot water extraction (PHWE) is a "green" technology which can be used for the extraction of essential components in Moringa oleifera leaf extracts. The behaviour of three flavonols (myricetin, quercetin and kaempferol) and total phenolic content (TPC) in Moringa leaf powder were investigated at various temperatures using PHWE. The TPC of extracts from PHWE were investigated using two indicators. These are reducing activity and the radical scavenging activity of 2,2-diphenyl-1-picrylhydrazyl (DPPH). Flavonols content in the PHWE extracts were analysed on high performance liquid chromatography with ultra violet (HPLC-UV) detection. The concentration of kaempferol and myricetin started decreasing at 150 °C while that of quercetin remained steady with extraction temperature. Optimum extraction temperature for flavonols and DPPH radical scavenging activity was found to be 100 °C. The TPC increased with temperature until 150 °C and then decreased while the reducing activity increased. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. One-step extraction of polar drugs from plasma by Parallel Artificial Liquid Membrane Extraction

    DEFF Research Database (Denmark)

    Pilařová, Veronika; Sultani, Mumtaz; Ask, Kristine Skoglund

    2017-01-01

    in the pores of a thin polymeric membrane, a well-known extraction principle also used in hollow fiber liquid-phase microextraction (HF-LPME). However, the new PALME technique offers a more user-friendly setup in which the supported liquid membrane is incorporated in a 96 well plate system. Thus, high......The new microextraction technique named parallel artificial liquid membrane extraction (PALME) was introduced as an alternative approach to liquid-liquid extraction of charged analytes from aqueous samples. The concept is based on extraction of analytes across a supported liquid membrane sustained...... for extraction of polar basic drugs was developed in the present work. The basic drugs hydralazine, ephedrine, metaraminol, salbutamol, and cimetidine were used as model analytes, and were extracted from alkalized human plasma into an aqueous solution via the supported liquid membrane. The extraction...

  2. Massive clot formation after tooth extraction

    Directory of Open Access Journals (Sweden)

    Santosh Hunasgi

    2015-01-01

    Full Text Available Oral surgical procedures mainly tooth extraction can be related with an extended hemorrhage owed to the nature of the process resulting in an "open wound." The attempt of this paper is to present a case of massive postoperative clot formation after tooth extraction and highlight on the oral complications of surgical procedures. A 32-year-old male patient reported to the Dental Clinic for evaluation and extraction of grossly decayed 46. Clinical evaluation of 46 revealed root stumps. Extraction of the root stumps was performed, and it was uneventful. Hemostasis was achieved and postsurgical instructions were specified to the patient. The patient reported to the clinic, the very subsequent morning with a criticism of bleeding at the extraction site. On clinical examination, bleeding was noted from the socket in relation to 46. To control bleeding, oral hemostatic drugs Revici - E (Ethamsylate 500 mg was prescribed and bleeding was stopped in 2 h. However, a massive clot was formed at the extraction site. Further, this clot resolved on its own in 1-week time. Despite the fact that dental extraction is considered to be a minor surgical procedure, some cases may present with life-threatening complications including hemorrhage. Vigilant and significant history taking, physical and dental examinations prior to dental procedures are a must to avoid intraoperative and postoperative complications.

  3. Binary solvent extraction system and extraction time effects on phenolic antioxidants from kenaf seeds (Hibiscus cannabinus L.) extracted by a pulsed ultrasonic-assisted extraction.

    Science.gov (United States)

    Wong, Yu Hua; Lau, Hwee Wen; Tan, Chin Ping; Long, Kamariah; Nyam, Kar Lin

    2014-01-01

    The aim of this study was to determine the best parameter for extracting phenolic-enriched kenaf (Hibiscus cannabinus L.) seeds by a pulsed ultrasonic-assisted extraction. The antioxidant activities of ultrasonic-assisted kenaf seed extracts (KSE) were determined by a 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity assay, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging assay, β -carotene bleaching inhibition assay, and ferric reducing antioxidant power (FRAP) assay. Total phenolic content (TPC) and total flavonoid content (TFC) evaluations were carried out to determine the phenolic and flavonoid contents in KSE. The KSE from the best extraction parameter was then subjected to high performance liquid chromatography (HPLC) to quantify the phenolic compounds. The optimised extraction condition employed 80% ethanol for 15 min, with the highest values determined for the DPPH, ABTS, and FRAP assay. KSE contained mainly tannic acid (2302.20 mg/100 g extract) and sinapic acid (1198.22 mg/100 g extract), which can be used as alternative antioxidants in the food industry.

  4. Some plant extracts retarde nitrification in soil

    Directory of Open Access Journals (Sweden)

    Abdul–Mehdi S. AL-ANSARI

    2015-12-01

    Full Text Available An incubation experiment was conducted to evaluate the effect of aqueous extracts of 17 plant materials on nitrification inhibition of urea- N in soil as compared with chemical inhibitor Dicyandiamide (DCD. Plant materials used in study were collected from different areas of Basrah province, south of Iraq. Aqueous extracts were prepared at ratio of 1:10 (plant material: water and added at conc. of 0.05, 0.10 and 0.20 ml g– 1 soil to loamy sand soil. DCD was added to soil at rate of 50 µg g-1 soil . Soil received urea at rate of 1000 µg N g-1 soil. Treated soils were incubated at 30 OC for 40 days. Results showed that application of all plant extracts, except those of casuarina, date palm and eucalyptus to soil retarded nitrification in soil. Caper, Sowthistle ,bladygrass and pomegranate extracts showed highest inhibition percentage (51, 42, 40 and 40 %, respectively and were found to be more effective than DCD (33 %. Highest inhibition was achieved by using those extracts at conc. of 0.1 ml g-1 soil after 10 days of incubation . Data also revealed that treated soil with these plant extracts significantly increased amount of NH4+–N and decreased amount of NO3-–N accumulation in soil compared with DCD and control treatments. Results of the study suggested a possibility of using aqueous extracts of some studied plants as potent nitrification inhibitor in soil.

  5. Ultrasound assisted extraction of bioactive compounds

    Directory of Open Access Journals (Sweden)

    Helena Drmić

    2010-01-01

    Full Text Available Many novel and innovative techniques are nowadays researched and explored in order to replace or improve classical, thermal processing technologies. One of newer technique is technique of minimal food processing, under what we assume ultrasound processing. Ultrasound technology can be very useful for minimal food processing because transmission of acoustic energy through product is fast and complete, which allows reduction in total processing time, and therefore lower energy consumption. Industrial processing is growing more and more waste products, and in desire of preservation of global recourses and energy efficiency, several ways of active compounds extraction techniques are now explored. The goal is to implement novel extraction techniques in food and pharmaceutical industry as well in medicine. Ultrasound assisted extraction of bioactive compounds offers increase in yield, and reduction or total avoiding of solvent usage. Increase in temperature of treatment is controlled and restricted, thereby preserving extracted bioactive compounds. In this paper, several methods of ultrasound assisted extraction of bioactive compounds from plant materials are shown. Ultrasound can improve classic mechanisms of extraction, and thereby offer novel possibilities of commercial extraction of desired compounds. Application of sonochemistry (ultrasound chemistry is providing better yield in desired compounds and reduction in treatment time.

  6. Binary Solvent Extraction System and Extraction Time Effects on Phenolic Antioxidants from Kenaf Seeds (Hibiscus cannabinus L.) Extracted by a Pulsed Ultrasonic-Assisted Extraction

    Science.gov (United States)

    Lau, Hwee Wen; Nyam, Kar Lin

    2014-01-01

    The aim of this study was to determine the best parameter for extracting phenolic-enriched kenaf (Hibiscus cannabinus L.) seeds by a pulsed ultrasonic-assisted extraction. The antioxidant activities of ultrasonic-assisted kenaf seed extracts (KSE) were determined by a 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity assay, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging assay, β-carotene bleaching inhibition assay, and ferric reducing antioxidant power (FRAP) assay. Total phenolic content (TPC) and total flavonoid content (TFC) evaluations were carried out to determine the phenolic and flavonoid contents in KSE. The KSE from the best extraction parameter was then subjected to high performance liquid chromatography (HPLC) to quantify the phenolic compounds. The optimised extraction condition employed 80% ethanol for 15 min, with the highest values determined for the DPPH, ABTS, and FRAP assay. KSE contained mainly tannic acid (2302.20 mg/100 g extract) and sinapic acid (1198.22 mg/100 g extract), which can be used as alternative antioxidants in the food industry. PMID:24592184

  7. Binary Solvent Extraction System and Extraction Time Effects on Phenolic Antioxidants from Kenaf Seeds (Hibiscus cannabinus L. Extracted by a Pulsed Ultrasonic-Assisted Extraction

    Directory of Open Access Journals (Sweden)

    Yu Hua Wong

    2014-01-01

    Full Text Available The aim of this study was to determine the best parameter for extracting phenolic-enriched kenaf (Hibiscus cannabinus L. seeds by a pulsed ultrasonic-assisted extraction. The antioxidant activities of ultrasonic-assisted kenaf seed extracts (KSE were determined by a 2,2-diphenyl-1-picrylhydrazyl (DPPH radical scavenging capacity assay, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS radical scavenging assay, β-carotene bleaching inhibition assay, and ferric reducing antioxidant power (FRAP assay. Total phenolic content (TPC and total flavonoid content (TFC evaluations were carried out to determine the phenolic and flavonoid contents in KSE. The KSE from the best extraction parameter was then subjected to high performance liquid chromatography (HPLC to quantify the phenolic compounds. The optimised extraction condition employed 80% ethanol for 15 min, with the highest values determined for the DPPH, ABTS, and FRAP assay. KSE contained mainly tannic acid (2302.20 mg/100 g extract and sinapic acid (1198.22 mg/100 g extract, which can be used as alternative antioxidants in the food industry.

  8. PROPOLIS EXTRACT IN POSTHARVEST CONSERVATION BANANA ' PRATA'

    Directory of Open Access Journals (Sweden)

    FLÁVIA REGINA PASSOS

    2016-01-01

    Full Text Available ABSTRACT In the present work were evaluated the effects of propolis coatings of various botanical sources on quality traits of bananas cv. Prata (Musa sapientum L. stored at room temperature. ´Prata´ bananas were selected and submitted to five postharvest treatments: four coatings applied by immersion in propolis extracts at a concentration of 2.5% (w/v and a control (without coating. Propolis extracts were applied as 1 a wild type aqueous propolis extract, 2 a wild type hydroalcoholic propolis extract, 3 a rosemary green type hydroalcoholic propolis extract and 4 a red type hydroalcoholic propolis extract. The bananas were evaluated at three-day intervals along 12 days for fresh weight losses, flesh firmness, soluble solids (SS, titratable acidity (TA, the ratio SS/TA and pH. Sensory analyses were performed after three and six days of storage by 55 not trained panelists designed for acceptability. At the end of the twelve-day storage period, bananas coated either with the rosemary green hydroalcoholic extract or with the aqueous extract presented lower fresh weight losses in comparison to the bananas of the control treatment. No differences were determined in relation to flesh firmness and along the storage period TA values decreased and pH values increased in bananas of all treatments. SS contents increased towards the end of the storage period that, consequently, contributed to increases in the SS/TA ratio. The most significant increase in SS/TA ratio was determined in bananas coated with the red type hydroalcoholic extract. Taste panelists did not detect significant differences amongst coated and not coated cv. Prata bananas up to six days of storage.

  9. Neutron activation analysis of medicinal plant extracts

    International Nuclear Information System (INIS)

    Vaz, S.M.; Saiki, M.; Vasconcellos, M.B.A.; Sertie, J.A.A.

    1995-01-01

    Instrumental neutron activation analysis was applied to the determination of the elements Br, Ca, Cl, Cs, Fe, K, La, Mg, Mn, Na, Rb and Zn in medicinal extracts obtained from Centella asiatica, Citrus aurantium L., Achyrolcline satureoides DC, Casearia sylvestris, Solano lycocarpum, Zingiber officinale Roscoe, Solidago microglossa and Stryphnondedron barbatiman plants. The elements Hg and Se were determined using radiochemical separation by means of retention of Se in HMD inorganic exchanger and solvent extraction of Hg by bismuth diethyldithiocarbamate solution. Precision and accuracy of the results were evaluated by analyzing biological reference materials. The therapeutic action of some elements found in plant extracts analyzed is briefly discussed. (author). 15 refs., 5 tabs

  10. First beam extracted from the SSC

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    On the 25th July 1986 the first 2,8 μA 66 MeV proton beam was successfully extracted from the separated sector cyclotron (SSC) at the National Accelerator Centre at Faure, South Africa. The beam has now also been transported for the first time down the high-energy beamline up to the last Faraday cup in front of the neutron therapy vault. A brief description of the extraction system of the SSC, consisting of an electrostatic extraction channel and two septum magnets is given

  11. COBALT SALTS PRODUCTION BY USING SOLVENT EXTRACTION

    Directory of Open Access Journals (Sweden)

    Liudmila V. Dyakova

    2010-06-01

    Full Text Available The paper deals with the extracting cobalt salts by using mixtures on the basis of tertiary amine from multicomponent solutions from the process of hydrochloride leaching of cobalt concentrate. The optimal composition for the extraction mixture, the relationship between the cobalt distribution coefficients and modifier’s nature and concentration, and the saltingout agent type have been determined. A hydrochloride extraction technology of cobalt concentrate yielding a purified concentrated cobalt solution for the production of pure cobalt salts has been developed and introduced at Severonikel combine.

  12. Software for Extracting 3D - MSSTs

    DEFF Research Database (Denmark)

    Somchaipeng, Kerawit; Sporring, Jon; Kreiborg, Sven

    2003-01-01

    The deep structure of an image is investigated, and a Multi-Scale Singularity Tree (MSST) is constructed based on the pair-wise annihilations of critical points. This report contains two main contributions. Firstly, we describe a fast, simple, and robust method of extracting feature lines from data...... sets of up to four dimen- sions, which we apply in order to extract critical paths from scale-spaces. Secondly, we investigate the extracting of MSSTs using either support regions or extrema partitions. Given an image, both methods produce a binary tree that mathematically represents the topological...

  13. Nootropic effect of meadowsweet (Filipendula vulgaris) extracts.

    Science.gov (United States)

    Shilova, I V; Suslov, N I

    2015-03-01

    The effects of the extracts of the aboveground parts of Filipendula vulgaris Moench on the behavior and memory of mice after hypoxic injury and their physical performance in the open-field test were studied using the models of hypoxia in a sealed volume, conditioned passive avoidance response (CPAR), and forced swimming with a load. The extracts improved animal resistance to hypoxia, normalized orientation and exploration activities, promoted CPAR retention after hypoxic injury, and increased physical performance. Aqueous extract of meadowsweet had the most pronounced effect that corresponded to the effect of the reference drug piracetam. These effects were probably caused by modulation of hippocampal activity.

  14. Newer methods of extraction of teeth

    Directory of Open Access Journals (Sweden)

    MHendra Chandha

    2016-06-01

    Full Text Available Atraumatic extraction methods are deemed to be important to minimize alveolar bone loss after tooth extraction. With the advent of such techniques, exodontia is no more a dreaded procedure in anxious patients. Newer system and techniques for extraction of teeth have evolved in the recent few decades. This article reviews and discusses new techniques to make simple and complex exodontias more efficient with improved patient outcomes. This includes physics forceps, powered periotome, piezosurgery, benex extractor, sonic instrument for bone surgery, lasers.

  15. Antimicrobial activity of Gentiana lutea L. extracts.

    Science.gov (United States)

    Savikin, Katarina; Menković, Nebojsa; Zdunić, Gordana; Stević, Tatjana; Radanović, Dragoja; Janković, Teodora

    2009-01-01

    Methanolic extracts of flowers and leaves of Gentiana lutea L., together with the isolated compounds mangiferin, isogentisin and gentiopicrin, were used to investigate the antimicrobial activity of the plant. A variety of Gram-positive and Gram-negative bacteria as well as the yeast Candida albicans has been included in this study. Both extracts and isolated compounds showed antimicrobial activity with MIC values ranging from 0.12-0.31 mg/ml. Our study indicated that the synergistic activity of the pure compounds may be responsible for the good antimicrobial effect of the extracts. Quantification of the secondary metabolites was performed using HPLC.

  16. Solvent extraction in the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Eccles, H.; Naylor, A.

    1987-01-01

    Solvent extraction techniques have been used in the uranium nuclear fuel cycle in three main areas; concentration of uranium from ore leach liquor, purification of ore concentrates and fuel reprocessing. Solvent extraction has been extended to the removal of transuranic elements from active waste liquor, the recovery of uranium from natural sources and the recovery of noble metals from active waste liquor. Schemes are presented for solvent extraction of uranium using the Amex or Dapex process; spent fuel reprocessing and the Purex process. Recent and future developments of the techniques are outlined. (UK)

  17. Extraction products of solid carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    1937-11-04

    A method is described for the manufacture of liquid products from pressure extracts of solid carbon-containing material by destructive hydrogenation, characterized in that the pressure extracts are hydrogenated in admixture with products of high-molecular weight formed during a previous destructive hydrogenation of another part of the same or other pressure extract and which has been collected as liquid without extensive cooling of the hot products of the reaction, which came from the reaction chamber where the previous destructive hydrogenation took place.

  18. Extraction of latent images from printed media

    Science.gov (United States)

    Sergeyev, Vladislav; Fedoseev, Victor

    2015-12-01

    In this paper we propose an automatic technology for extraction of latent images from printed media such as documents, banknotes, financial securities, etc. This technology includes image processing by adaptively constructed Gabor filter bank for obtaining feature images, as well as subsequent stages of feature selection, grouping and multicomponent segmentation. The main advantage of the proposed technique is versatility: it allows to extract latent images made by different texture variations. Experimental results showing performance of the method over another known system for latent image extraction are given.

  19. Spreadsheet algorithm for stagewise solvent extraction

    International Nuclear Information System (INIS)

    Leonard, R.A.; Regalbuto, M.C.

    1994-01-01

    The material balance and equilibrium equations for solvent extraction processes have been combined with computer spreadsheets in a new way so that models for very complex multicomponent multistage operations can be setup and used easily. A part of the novelty is the way in which the problem is organized in the spreadsheet. In addition, to facilitate spreadsheet setup, a new calculational procedure has been developed. The resulting Spreadsheet Algorithm for Stagewise Solvent Extraction (SASSE) can be used with either IBM or Macintosh personal computers as a simple yet powerful tool for analyzing solvent extraction flowsheets. 22 refs., 4 figs., 2 tabs

  20. Sequential extraction of uranium metal contamination

    International Nuclear Information System (INIS)

    Murry, M.M.; Spitz, H.B.; Connick, W.B.

    2016-01-01

    Samples of uranium contaminated dirt collected from the dirt floor of an abandoned metal rolling mill were analyzed for uranium using a sequential extraction protocol involving a series of five increasingly aggressive solvents. The quantity of uranium extracted from the contaminated dirt by each reagent can aid in predicting the fate and transport of the uranium contamination in the environment. Uranium was separated from each fraction using anion exchange, electrodeposition and analyzed by alpha spectroscopy analysis. Results demonstrate that approximately 77 % of the uranium was extracted using NH 4 Ac in 25 % acetic acid. (author)

  1. Actinide extractants for the nuclear industry of the future

    International Nuclear Information System (INIS)

    Musikas, C.; Morisseau, J.C.; Hoel, P.; Guillaume, B.

    1987-06-01

    Non organo-phosphorus extractants properties regarding the extractions of actinides in nuclear fuels reprocessing are presented. N,N-dialkylamides are proposed as alternatives to TBP.N,N'-tetraalkylamides or pentaalkyl propane diamides properties are reported. They show that those bidentate extractants are alternatives to bidentate organophosphorus extractants for actinides (III) extraction from concentrated nitric acid. 11 figs, 15 refs

  2. Pain and chewing sensitivity during fixed orthodontic treatment in extraction and non-extraction patients.

    Science.gov (United States)

    Sayar, Gulsilay

    2017-01-01

    The aim of this study was to evaluate the differences in pain perception and chewing sensitivity between extraction and non-extraction patients. Thirty orthodontic patients (11 males, 19 females) were included in this study who were classified as extraction (n=15; 6 males, 9 females) and non-extraction patients (n=15; 7 males, 8 females). The mean age of patients were 15.10±1.83 years in non-extraction group and 15.44±0.75 years in extraction group. The patients were asked to complete the Visual Analogue Scale (VAS) questionnaire and they were asked to mark the presence or absence of sensitivity during 7 days after the first arch wire placement. Pain intensity comparison between groups was performed using the Mann-Whitney U test. The Friedman test was used to analyze within-group differences over time. There were no significant differences in pain scores between the groups. Pain levels significantly decreased between day 1 and day 3 in both the groups. No differences were found in the chewing sensitivity between the non-extraction and extraction groups. No difference in the pain perception was observed between the extraction and non-extraction patients during the 7 days after arch wire placement.

  3. PAIN AND CHEWING SENSITIVITY DURING FIXED ORTHODONTIC TREATMENT IN EXTRACTION AND NON-EXTRACTION PATIENTS

    Directory of Open Access Journals (Sweden)

    Gülşilay SAYAR

    2017-04-01

    Full Text Available Purpose: The aim of this study was to evaluate the differences in pain perception and chewing sensitivity between extraction and non-extraction patients. Subjects and Methods: Thirty orthodontic patients (11 males, 19 females were included in this study who were classified as extraction (n=15; 6 males, 9 females and non-extraction patients (n=15; 7 males, 8 females. The mean age of patients were 15.10±1.83 years in non-extraction group and 15.44±0.75 years in extraction group. The patients were asked to complete the Visual Analogue Scale (VAS questionnaire and they were asked to mark the presence or absence of sensitivity during 7 days after the first arch wire placement. Pain intensity comparison between groups was performed using the Mann-Whitney U test. The Friedman test was used to analyze within-group differences over time. Results: There were no significant differences in pain scores between the groups. Pain levels significantly decreased between day 1 and day 3 in both the groups. No differences were found in the chewing sensitivity between the non-extraction and extraction groups. Conclusion: No difference in the pain perception was observed between the extraction and non-extraction patients during the 7 days after arch wire placement.

  4. Antioxidant activities of extracts from five edible mushrooms using different extractants

    Directory of Open Access Journals (Sweden)

    Suphaphit Boonsong

    2016-03-01

    Full Text Available Extractions were performed of the total phenolic and flavonoid contents and antioxidant properties of five edible mushroom samples—Lentinus edodes, Volvariella volvacea, Pleurotus eous, Pleurotus sajor-caju and Auricularia auricular—using three different extractants. Among the three different extractants, 50% (volume per volume; v/v ethanol was the most suitable for antioxidant extraction from the mushroom samples. The 50% (v/v ethanolic extract of dried L. edodes contained higher total phenolic and flavonoid contents than in the other mushroom extract samples. The antioxidant activities of 50% (v/v ethanolic extract of dried L. edodes showed the strongest 2,2-diphenyl-1-picrylhydrazyl radical-scavenging assay (64.34% compared to butylated hydroxyanisole (BHA and α-tocopherol at 500 μg/mL. The ethanolic extract showed a lower reducing power of 0.10 compared to BHA and α-tocopherol at 500 μg/mL. Moreover, the L. edodes ethanolic extract also had the highest chelating ability (66.28% which was lower than for ethylenediaminetetraacetic acid at 500 μg/mL and showed the strongest superoxide radical-scavenging activity (64.17% compared to BHA and α-tocopherol. Therefore, the 50% (v/v ethanolic extract of L. edodes could be used as a potential natural antioxidative source or as an ingredient in the fish and fishery product industries.

  5. Separation of digoxin by luiquid-luiquid extraction from extracts of foxglove secondary glycosides

    Directory of Open Access Journals (Sweden)

    Novković Vesna V.

    2014-01-01

    Full Text Available The present study deals with the extraction of digoxin (Dgx from chloroform and trichloroethylene extracts of the secondary glycosides of fermented foxglove (Digitalis lanata Ehrh. foliage by liquid-liquid extraction. The extraction degree (ED of Dgx achieved by maceration and percolation using 10% vol. aqueous ethanol solutions were higher than 95%. Using trichlorethylene and chloroform, the ED of Dgx of about 100% and 96%, respectively from the liquid ethanolic extracts (macerate or percolate were achieved by the four-cycle extraction. Fifteen separating funnels were employed for the liquid-liquid extraction. Three different four-component two-phase systems (ethanol:water - chloroform:ethyl acetate, ethanol:water - chloroform:trichloroethylene and ethanol:water - trichloroethylene:ethyl acetate were tested as an extracting solvent to get the final product having more than 98% of Dgx. The initial amount of the chloroform or trichloroethylene extract in the light phase was varied between 5 and 25 g/L, while the volume ratio of light and heavy phases was in the range of 1:1 to 1:2. The best Dgx yield of 98% was achieved with the system ethanol:water - chloroform:trichloroethylene 35:15:20:30 at the volume ratio of the phases of 1:1.1 and at the initial amount of the extract of 15 g/L. Purity of the separated digoxin was 99.8 %. [Projekat Ministarstva nauke Republike Srbije, br. TR-34012

  6. Phenolic Content and Antioxidant Activity of Hibiscus cannabinus L. Seed Extracts after Sequential Solvent Extraction

    Directory of Open Access Journals (Sweden)

    Shahid Iqbal

    2012-10-01

    Full Text Available A sequential solvent extraction scheme was employed for the extraction of antioxidant compounds from kenaf (Hibiscus cannabinus L. seeds. Yield of extracts varied widely among the solvents and was the highest for hexane extract (16.6% based on dry weight basis, while water extract exhibited the highest total phenolic content (18.78 mg GAE/g extract, total flavonoid content (2.49 mg RE/g extract, and antioxidant activities (p < 0.05. DPPH and hydroxyl radical scavenging, β-carotene bleaching, metal chelating activity, ferric thiocyanate and thiobarbituric acid reactive substances assays were employed to comprehensively assess the antioxidant potential of different solvent extracts prepared sequentially. Besides water, methanolic extract also exhibited high retardation towards the formation of hydroperoxides and thiobarbituric acid reactive substances in the total antioxidant activity tests (p < 0.05. As conclusion, water and methanol extracts of kenaf seed may potentially serve as new sources of antioxidants for food and nutraceutical applications.

  7. Diluent effects in solvent extraction. The Effects of Diluents in Solvent Extraction - a literature study

    International Nuclear Information System (INIS)

    Loefstroem-Engdahl, Elin; Aneheim, Emma; Ekberg, Christian; Foreman, Mark; Skarnemark, Gunnar

    2010-01-01

    The fact that the choice of organic diluent is important for a solvent extraction process goes without saying. Several factors, such as e.g. price, flash point, viscosity, polarity etc. each have their place in the planning of a solvent extraction system. This high number of variables makes the lack of compilations concerning diluent effects to an interesting topic. Often the interest for the research concerning a specific extraction system focuses on the extractant used and the complexes built up during an extraction. The diluents used are often classical ones, even if it has been shown that choice of diluent can affect extraction as well as separation in an extraction system. An attempt to point out important steps in the understanding of diluent effects in solvent extraction is here presented. This large field is, of course, not summarized in this article, but an attempt is made to present important steps in the understanding of diluents effects in solvent extraction. Trying to make the information concerning diluent effects and applications more easily accessible this review offers a selected summarizing of literature concerning diluents effects in solvent extraction. (authors)

  8. Ultraviolet light assisted extraction of flavonoids and allantoin from aqueous and alcoholic extracts of Symphytum officinale.

    Science.gov (United States)

    Al-Nimer, Marwan S M; Wahbee, Zainab

    2017-01-01

    Symphytum officinale (comfrey) is a medicinal plant commonly used in decoction and to treat ailments. It protects the skin against ultraviolet (UV)-irradiation. UV irradiation may induce variable effects on the constituents of herbal extracts and thereby may limit or improve the advantages of using these extracts as medicinal supplements. This study aimed to assess the effect of UV radiations including UV-A, UV-B, and UV-C on the constituents of S. officinale aqueous and alcoholic extracts. Comfrey extracts (1% w/v) were prepared using distilled water, ethanol, and methanol. They were exposed to wavelengths of UV-A, UV-B, and UV-C for 10 min. The principal peak on the UV-spectroscopy scanning, the flavonoids, reducing power, and the allantoin levels were determined before and after irradiation. UV irradiation reduces the magnitude of the principle peak at 355 nm wavelength of the aqueous infusion and methanol extracts. It improves the levels of flavonoids and reducing power of the aqueous extracts and increases the levels of allanotoin in aqueous and methanol extracts. UV-radiation enhances the yields of active ingredient of comfrey extracted with methanol, whereas improves the flavonoids, reducing power, and allantoin levels of comfrey extracted by the aqueous infusion method. UV-radiation reduces the levels of flavonoids, reducing power and allantoin when the comfrey extracted by alcohols.

  9. Technology Corner: Automated Data Extraction Using Facebook

    Directory of Open Access Journals (Sweden)

    Nick Flor

    2012-06-01

    Full Text Available Because of Facebook’s popularity, law enforcement agents often use it as a key source of evidence. But like many user digital trails, there can be a large amount of data to extract for analysis. In this paper, we explore the basics of extracting data programmatically from a user’s Facebook via a Web app. A data extraction app requests data using the Facebook Graph API, and Facebook returns a JSON object containing the data. Before an app can access a user’s Facebook data, the user must log into Facebook and give permission. Thus, this approach is limited to situations where users give consent to the data extraction.

  10. Extracting pronunciation rules for phonemic variants

    CSIR Research Space (South Africa)

    Davel, M

    2006-04-01

    Full Text Available Various automated techniques can be used to generalise from phonemic lexicons through the extraction of grapheme-to-phoneme rule sets. These techniques are particularly useful when developing pronunciation models for previously unmodelled languages...

  11. Solid Phase Extraction and Spectrophotometric Determination of ...

    African Journals Online (AJOL)

    NJD

    2005-04-15

    Apr 15, 2005 ... to the economy and has significant industrial applications. The development of a ... Waters Solid Phase Extraction (SPE) device (the device can carry out twenty ... HPLC grade dimethyl formamide (DMF) (Fisher. Corporation ...

  12. VT Lake Champlain (extracted from VHDCARTO) - polygon

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) LKCH5K is an extract of Lake Champlain that is derived from VHDCARTO. The following metadata is from VHDCARTO.VHDCARTO is a simplified version of...

  13. Extractive Spectrophotometric Determination of Omeprazole in ...

    African Journals Online (AJOL)

    Erah

    Abstract. Purpose: To develop a simple, rapid and selective method for the extractive spectrophotometric determination of .... The colour intensity of the organic layer had shown a very .... considerable attention for quantitative analyses of many ...

  14. Biodegradation of chlorobenzene using immobilized crude extracts ...

    African Journals Online (AJOL)

    SERVER

    2007-10-04

    Oct 4, 2007 ... immobilized crude extracts were reused for all other experiments and found that immobilization .... India which are of analytical reagent grade. .... 9. 60. 3. 1. Figure 3. Degradation of chlorobenzene by immobilized crude.

  15. Prospects for recovering gallium from extracted coal

    Energy Technology Data Exchange (ETDEWEB)

    Ratynskiy, V M; Reznik, A M; Zekel, L A; Zharov, Yu N

    1979-01-01

    The authors conducted research in order to establish the physical-chemical mechanisms governing the behavior of rare and dispersed elements within the thermal treatment processes used to treat coal and enrichment waste. New means are proposed for obtaining concentrations of gallium. These methods are under consideration primarily for the isolation of gallium as a by-product during the production of aggloporite from coal waste. The authors examine in detail the results of research dealing with the transfer of gallium compounds in a solution, the extraction of gallium from solutions, the separation of impurities from gallium, and the isolation of gallium from extract. Utilizing research results, the authors determine the expenditure coefficient and costs for additives used to extract gallium from waste by-products. The realization of this gallium extraction process from those products having the best prospects for gallium content resulted in economic savings.

  16. Biologically active extracts with kidney affections applications

    Science.gov (United States)

    Pascu (Neagu), Mihaela; Pascu, Daniela-Elena; Cozea, Andreea; Bunaciu, Andrei A.; Miron, Alexandra Raluca; Nechifor, Cristina Aurelia

    2015-12-01

    This paper is aimed to select plant materials rich in bioflavonoid compounds, made from herbs known for their application performances in the prevention and therapy of renal diseases, namely kidney stones and urinary infections (renal lithiasis, nephritis, urethritis, cystitis, etc.). This paper presents a comparative study of the medicinal plant extracts composition belonging to Ericaceae-Cranberry (fruit and leaves) - Vaccinium vitis-idaea L. and Bilberry (fruit) - Vaccinium myrtillus L. Concentrated extracts obtained from medicinal plants used in this work were analyzed from structural, morphological and compositional points of view using different techniques: chromatographic methods (HPLC), scanning electronic microscopy, infrared, and UV spectrophotometry, also by using kinetic model. Liquid chromatography was able to identify the specific compounds of the Ericaceae family, present in all three extracts, arbutosid, as well as specific components of each species, mostly from the class of polyphenols. The identification and quantitative determination of the active ingredients from these extracts can give information related to their therapeutic effects.

  17. Protocol optimization for deoxyribonucleic acid (DNA) extraction ...

    African Journals Online (AJOL)

    Arachis hypogaea L.) is particularly problematic due to the presence of phenolic compounds and polysaccharides. Inconsistencies in extraction results can be attributed to the age and growth stages of the plant material analyzed. Mature leaves ...

  18. Medicaid Analytic eXtract (MAX) Chartbooks

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Medicaid Analytic eXtract Chartbooks are research tools and reference guides on Medicaid enrollees and their Medicaid experience in 2002 and 2004. Developed for...

  19. Injection and extraction techniques in circular accelerators

    International Nuclear Information System (INIS)

    Tang Jingyu

    2008-01-01

    Injection and extraction are usually the key systems in circular accelerators. They play important roles in transferring the beam from one stage acceleration to the other or to experimental stations. It is also in the injection and extraction regions where beam losses happen mostly. Due to the tight space and to reduce the perturbation to the circulating orbit, the devices are usually designed to meet special requirements such as compactness, small stray field, fast rise time or fall time, etc. Usual injection and extraction devices include septum magnets, kicker magnets, electrostatic deflectors, slow bump magnets and strippers. In spite of different accelerators and specification for the injection and extraction devices, many techniques are shared in the design and manufacturing. This paper gives a general review on the techniques employed in the major circular accelerators in China. (authors)

  20. Solvent extraction studies on cadmium. Pt. 2

    International Nuclear Information System (INIS)

    Alian, A.; Badran, A.; El-Bassiouny, M.S.

    1975-01-01

    An extraction study was performed on tracer concentrations of cadmium, zinc and silver halides in absence and presence of phosphoric acid. A long chain amine (Amberlite LA-2) and an organophosphorus solvent (TBP) have been investigated. Since orthophosphoric acid was found to have a similar role as sulphuric acid, it was interesting to carry out a systematic investigation on the extraction behaviour of the halides of the three elements Cs, Zn and Ag in orthophosphoric acid medium. The separation of Cd from Zn or Ag is frequently encountered in chemical as well as radiochemical analysis. The results presented here give many possibilities for such separation. Amberlite LA-2 was always used as 5 vol% and TBP as 50 vol% in benzene. The presence of phosphoric acid was found to enhance considerably the extraction of most halides. The mechanism of extraction has been discussed in light of the obtained results. (T.G.)

  1. Automatic Contour Extraction from 2D Image

    Directory of Open Access Journals (Sweden)

    Panagiotis GIOANNIS

    2011-03-01

    Full Text Available Aim: To develop a method for automatic contour extraction from a 2D image. Material and Method: The method is divided in two basic parts where the user initially chooses the starting point and the threshold. Finally the method is applied to computed tomography of bone images. Results: An interesting method is developed which can lead to a successful boundary extraction of 2D images. Specifically data extracted from a computed tomography images can be used for 2D bone reconstruction. Conclusions: We believe that such an algorithm or part of it can be applied on several other applications for shape feature extraction in medical image analysis and generally at computer graphics.

  2. The extraction, identification and quantification of hypoglycemic ...

    African Journals Online (AJOL)

    Jane

    2011-08-22

    Aug 22, 2011 ... indicated that extraction U3 and U4 obviously decreased the blood sugar. Also, U3 was .... resin chromatography due to its main component, saponins identified by ..... The authors thank Changchun University of Technology.

  3. Therapeutic role of glucogalactan polysaccharide extracted from ...

    African Journals Online (AJOL)

    RACHEL

    2015-06-17

    Jun 17, 2015 ... The comet assay for DNA revealed that, TMT induced statistically significant .... seed medium containing (g/L) sucrose, 20; yeast extract, 2; ... UV–vis spectroscopy analyses were conducted on ultraviolet– ..... mutations.

  4. Antioxidant Activity of Mulberry Fruit Extracts

    Science.gov (United States)

    Arfan, Muhammad; Khan, Rasool; Rybarczyk, Anna; Amarowicz, Ryszard

    2012-01-01

    Phenolic compounds were extracted from the fruits of Morus nigra and Morus alba using methanol and acetone. The sugar-free extracts (SFEs) were prepared using Amberlite XAD-16 column chromatography. All of the SFEs exhibited antioxidant potential as determined by ABTS (0.75–1.25 mmol Trolox/g), DPPH (2,2-diphenyl-1-picrylhydrazyl) (EC50 from 48 μg/mL to 79 μg/mL), and reducing power assays. However, a stronger activity was noted for the SFEs obtained from Morus nigra fruits. These extracts also possessed the highest contents of total phenolics: 164 mg/g (methanolic SFE) and 173 mg/g (acetonic SFE). The presence of phenolic acids and flavonoids in the extracts was confirmed using HPLC method and chlorogenic acid and rutin were found as the dominant phenolic constituents in the SFEs. PMID:22408465

  5. Antioxidant Activity of Mulberry Fruit Extracts

    Directory of Open Access Journals (Sweden)

    Ryszard Amarowicz

    2012-02-01

    Full Text Available Phenolic compounds were extracted from the fruits of Morus nigra and Morus alba using methanol and acetone. The sugar-free extracts (SFEs were prepared using Amberlite XAD-16 column chromatography. All of the SFEs exhibited antioxidant potential as determined by ABTS (0.75–1.25 mmol Trolox/g, DPPH (2,2-diphenyl-1-picrylhydrazyl (EC50 from 48 μg/mL to 79 μg/mL, and reducing power assays. However, a stronger activity was noted for the SFEs obtained from Morus nigra fruits. These extracts also possessed the highest contents of total phenolics: 164 mg/g (methanolic SFE and 173 mg/g (acetonic SFE. The presence of phenolic acids and flavonoids in the extracts was confirmed using HPLC method and chlorogenic acid and rutin were found as the dominant phenolic constituents in the SFEs.

  6. Aqueous ethanolic extract of Cochlospermum planchonii rhizome ...

    African Journals Online (AJOL)

    DR. ABU

    2012-07-03

    Jul 3, 2012 ... This study was designed to investigate the effects of aqueous ethanolic ... Key words: Cochlospermum planchonii, sperm characteristics, reproduction, Wistar rats. ... extract was stored in air-tight container at 4°C until needed.

  7. Antimicrobial activity of Berkheya bergiana leaves extracts

    African Journals Online (AJOL)

    Jane

    2011-06-06

    Jun 6, 2011 ... in the traditional treatment of various diseases on an ... antibiotics and the high cost of conventional drugs have ..... using water-based agar. This support Freiburghans et al. (1996) that, different solvent system extracts of some.

  8. Immunostimulant activity of standardised extracts of Mangifera ...

    African Journals Online (AJOL)

    Methods: Mice were randomly divided into 4 groups, namely, vehicle, untreated, MI and CD groups (n. = 6). .... phenolics and flavonoids [5]. ... The HPLC analysis of MI and CD extracts basis ... quantification (LOQ) and detection (LOD) were.

  9. Black ginseng extract ameliorates hypercholesterolemia in rats

    Directory of Open Access Journals (Sweden)

    Evelyn Saba

    2016-04-01

    Conclusion: Administration of BG extracts to Sprague Dawley rats fed with high-cholesterol diet ameliorated hypercholesterolemia, which was mediated via modulation of cholesterol-metabolizing marker genes. This data throw a light on BG's cardioprotective effects.

  10. Extraction optimization and characterization of polysaccharide ...

    African Journals Online (AJOL)

    Keywords: Pinellia rhizoma, Polysaccharides Optimization extraction, Monosaccharide composition,. Antioxidant ..... mean yield of PRP was 2.47 %. Therefore ... Table 3: Analysis of variance (ANOVA) for the fitted quadratic polynomial model.

  11. SNS EXTRACTION KICKER POWER SUPPLY PROTOTYPE TEST

    International Nuclear Information System (INIS)

    MI, J.L.; SANDBERG, J.; SANDERS, R.; SOUKAS, A.; ZHANG, W.

    2000-01-01

    The SNS (Spallation Neutron Source) accumulator ring Extraction System consists of a Fast kicker and a Lambertson Septum magnet. The proposed design will use 14 kicker magnets powered by an Extraction Kicker Power Supply System. They will eject the high power beam from the SNS accumulator ring into RTBT (Ring to Target Beam Tunnel) through a Lambertson Septum magnet. This paper describes some test results of the SNS Extraction Kicker power supply prototype. The high repetition rate of 60 pulse per second operation is the challenging part of the design. In the prototype testing, a 3 kA damp current of 700ns pulse-width, 200 nS rise time and 60 Hz repetition rate at 32 kV PFN operation voltage has been demonstrated. An Extraction kicker power supply system design diagram is depicted

  12. Zingiber officinale Roscoe Aqueous Extract Modulates ...

    African Journals Online (AJOL)

    Methods: Z. officinale rhizomes were extracted with water by continuous shaking for 5 ... Conclusion: The findings of this study suggest that ZOA may ameliorate plasma leakage in dengue .... AS1000 autosampler, UV2000 UV detector and.

  13. Current practice in transvenous lead extraction

    DEFF Research Database (Denmark)

    Bongiorni, Maria Grazia; Blomström-Lundqvist, Carina; Kennergren, Charles

    2012-01-01

    AIM: Current practice with regard to transvenous lead extraction among European implanting centres was analysed by this survey. METHODS AND RESULTS: Among all contacted centres, 164, from 30 countries, declared that they perform transvenous lead extraction and answered 58 questions...... with a compliance rate of 99.9%. Data from the survey show that there seems to be an overall increasing experience of managing various techniques of lead extraction and a widespread involvement of cardiac centres in this treatment. Results and complication rates seem comparable with those of main international...... registries. CONCLUSION: This survey gives an interesting snapshot of lead extraction in Europe today and gives some clues for future research and prospective European registries....

  14. Extraction of thorium from solution using tribenzylamine

    International Nuclear Information System (INIS)

    Whitehead, N.E.; Ditchburn, R.G.

    1975-01-01

    A method is described for isolating thorium from solutions in a state sufficiently pure for alpha spectroscopy. It parallels the method described by Moore and Thern (Radiochemical Radioanalytical Letters 19(2), 117-125, 1974), but uses tribenzylamine instead of Adogen 364. The method involves extracting thorium from a solution in 8M nitric acid, into a 6% w/v solution of tribenzylamine in toluene. The thorium is concentrated in a third, interfacial layer which forms. This layer is isolated, diluted with chloroform, and back extracted with 10M HC1. Overall yields range between 83 and 90% for one extraction. The acidic solution is taken down to near dryness, diluted until the pH is 2 and extracted into 1.2 ml of thenoyltrifluoroacetone in toluene. This solution is evaporated onto a stainless steel disk, flamed, and the disk may be used for alpha spectroscopy of thorium isotopes. (auth.)

  15. Anethum Graveolens Linn (Umbelliferae) Extract Attenuates Stress ...

    African Journals Online (AJOL)

    Erah

    College of Biomedical and Health Sciences, Department of Biotechnology, Konkuk University, Chungju, Republic of ... anti-stress and cognition-improving effects of A. graveolens extract in a rat model. ..... This work was supported by Konkuk.

  16. Extracting Minerals from Seawater: An Energy Analysis

    Directory of Open Access Journals (Sweden)

    Ugo Bardi

    2010-04-01

    Full Text Available The concept of recovering minerals from seawater has been proposed as a way of counteracting the gradual depletion of conventional mineral ores. Seawater contains large amounts of dissolved ions and the four most concentrated metal ones (Na, Mg, Ca, K are being commercially extracted today. However, all the other metal ions exist at much lower concentrations. This paper reports an estimate of the feasibility of the extraction of these metal ions on the basis of the energy needed. In most cases, the result is that extraction in amounts comparable to the present production from land mines would be impossible because of the very large amount of energy needed. This conclusion holds also for uranium as fuel for the present generation of nuclear fission plants. Nevertheless, in a few cases, mainly lithium, extraction from seawater could provide amounts of metals sufficient for closing the cycle of metal use in the economy, provided that an increased level of recycling can be attained.

  17. Extraction of some acids using aliphatic amines; Extraction de quelques acides par des amines aliphatiques

    Energy Technology Data Exchange (ETDEWEB)

    Matutano, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-01

    Hydrochloric, nitric, sulphuric, perchloric, phosphoric, acetic and formic acids in aqueous solution (0.05 to 10 M) are extracted by amberlite LA2 and trilaurylamine in solution, 5 per cent by volume, in kerosene and xylene respectively. The extraction process consists of: neutralization of the amine salt; a 'molecular extraction', i.e. an extraction using an excess of acid with respect to the stoichiometry of the amine salt. According to the behaviour of the acid during the extraction, three groups may be distinguished: completely dissociated acids, carboxylic acids, phosphoric acid. This classification is also valid for the extraction of the water which occurs simultaneously with that of the acid. An extraction mechanism is put forward for formic acid and the formation constant of its amine salt is calculated. (author) [French] Les acides chlorhydrique, nitrique, sulfurique, perchlorique, phosphorique, acetique et formique, en solution aqueuse - 0,05 a 10 M - sont extraits par l'amberlite LA2 et la trilaurylamine en solution, a 5 pour cent en volume, dans le kerosene et le xylene respectivement. L'extraction comprend: une neutralisation de l'amine par l'acide avec formation d'un sel d'amine; une 'extraction moleculaire', c'est-a-dire une extraction d'acide en exces par rapport a la stoechiometrie du sel d'amine. Suivant le comportement des acides au cours de l'extraction nous distinguons trois groupes: acides entierement dissocies, acides carboxyliques, acide phosphorique. Cette classification est egalement valable pour l'extraction de l'eau qui est simultanee a celle de l'acide. Un mecanisme d'extraction pour l'acide formique est propose et nous calculons la constante de formation de son sel d'amine. (auteur)

  18. Extraction, bioavailability, and bioefficacy of capsaicinoids

    Directory of Open Access Journals (Sweden)

    Muwen Lu

    2017-01-01

    Full Text Available Capsaicinoids are active constituents responsible for the pungent and spicy flavor in chili peppers. During the past few decades, various extraction methods of capsaicinoids from peppers have been developed with high yields. Through biological studies, pharmacological benefits have been reported such as pain relief, antiinflammation, anticancer, cardio-protection, as well as weight loss. In this paper, the extraction methods and bioavailability of capsaicinoids are reviewed and discussed. In addition, the pharmacological effects and their underlying mechanisms are also studied.

  19. Extraction, bioavailability, and bioefficacy of capsaicinoids

    OpenAIRE

    Muwen Lu; Chi-Tang Ho; Qingrong Huang

    2017-01-01

    Capsaicinoids are active constituents responsible for the pungent and spicy flavor in chili peppers. During the past few decades, various extraction methods of capsaicinoids from peppers have been developed with high yields. Through biological studies, pharmacological benefits have been reported such as pain relief, antiinflammation, anticancer, cardio-protection, as well as weight loss. In this paper, the extraction methods and bioavailability of capsaicinoids are reviewed and discussed. In ...

  20. Gold and Silver Extraction from Leach Solutions

    Directory of Open Access Journals (Sweden)

    Bagdaulet K. Kenzhaliyev

    2014-03-01

    Full Text Available There has been carried out an investigation on the extraction of gold and silver from thiosulfate solutions: standard test and technological solutions of chemical and electrochemical leaching. The influence of related metals on the process of extracting gold from solution was studied. There has been conducted a comparative study of the IR spectra of solutions after the sorption of gold, silver and related metals.

  1. Frequency response of slow beam extraction process

    International Nuclear Information System (INIS)

    Toyama, Takeshi; Sato, Hikaru; Marutsuka, Katsumi; Shirakata, Masashi.

    1994-01-01

    A servo control system has been incorporated into the practical slow extraction system in order to stabilize the spill structure less than a few kHz. Frequency responses of the components of the servo-spill control system and the open-loop frequency response were measured. The beam transfer function of the slow extraction process was derived from the measured data and approximated using a simple function. This is utilized to improve the performance of the servo-loop. (author)

  2. Actinomyces meyeri brain abscess following dental extraction

    OpenAIRE

    Clancy, U; Ronayne, A; Prentice, M B; Jackson, A

    2015-01-01

    We describe the rare occurrence of an Actinomyces meyeri cerebral abscess in a 55-year-old woman following a dental extraction. This patient presented with a 2-day history of hemisensory loss, hyper-reflexia and retro-orbital headache, 7?days following a dental extraction for apical peridonitis. Neuroimaging showed a large left parietal abscess with surrounding empyema. The patient underwent craniotomy and drainage of the abscess. A. meyeri was cultured. Actinomycosis is a rare cause of cereb...

  3. Incorporating Relation Paths in Neural Relation Extraction

    OpenAIRE

    Zeng, Wenyuan; Lin, Yankai; Liu, Zhiyuan; Sun, Maosong

    2016-01-01

    Distantly supervised relation extraction has been widely used to find novel relational facts from plain text. To predict the relation between a pair of two target entities, existing methods solely rely on those direct sentences containing both entities. In fact, there are also many sentences containing only one of the target entities, which provide rich and useful information for relation extraction. To address this issue, we build inference chains between two target entities via intermediate...

  4. Processing Relative Clause Extractions in Swedish

    OpenAIRE

    Tutunjian, Damon; Heinat, Fredrik; Klingvall, Eva; Wiklund, Anna-Lena

    2017-01-01

    Relative clauses are considered strong islands for extraction across languages. Swedish comprises a well-known exception, allegedly allowing extraction from relative clauses (RCE), raising the possibility that island constraints may be subject to “deep variation” between languages. One alternative is that such exceptions are only illusory and represent “surface variation” attributable to independently motivated syntactic properties. Yet, to date, no surface account has proven tenable for Swed...

  5. Hanford soil partitioning and vapor extraction study

    International Nuclear Information System (INIS)

    Yonge, D.; Hossain, A.; Cameron, R.; Ford, H.; Storey, C.

    1996-07-01

    This report describes the testing and results of laboratory experiments conducted to assist the carbon tetrachloride soil vapor extraction project operating in the 200 West Area of the Hanford Site in Richland, Washington. Vapor-phase adsorption and desorption testing was performed using carbon tetrachloride and Hanford Site soils to estimate vapor-soil partitioning and reasonably achievable carbon tetrachloride soil concentrations during active vapor extractions efforts at the 200 West Area. (CCl 4 is used in Pu recovery from aqueous streams.)

  6. Enzymatic hydrolysis of plant extracts containing inulin

    Energy Technology Data Exchange (ETDEWEB)

    Guiraud, J.P.; Galzy, P.

    1981-10-01

    Inulin-rich extracts of chicory and Jerusalem artichoke are a good potential source of fructose. Total enzymatic hydrolysis of these extracts can be effected by yeast inulinases (EC 3.2.1.7). Chemical prehydrolysis is unfavourable. Enzymatic hydrolysis has advantages over chemical hydrolysis: it does not produce a dark-coloured fraction or secondary substances. It is possible to envisage the preparation of high fructose syrups using this process. (Refs. 42).

  7. [Delayed wound healing post molar extraction].

    Science.gov (United States)

    Schepers, R H; De Visscher, J G A M

    2009-02-01

    One month post extraction of the second left maxillary molar the alveolar extraction site showed no signs of healing and was painful. The patient had been using an oral bisphosphonate during 3 years. Therefore, the lesion was diagnosed as bisphosphonate-induced maxillary osteonecrosis. Treatment was conservative. Since one month later the pain had increased and the wound healing had decreased, a biopsy was carried out. Histopathologic examination revealed a non-Hodgkin lymphoma.

  8. MTN magnet for the SPS extracted beam.

    CERN Document Server

    CERN PhotoLab

    1976-01-01

    This type of dipole magnet was used in the extracted beam lines of the North Area. It shows an opening for three different proton beam lines: a primary extracted proton beam, split by an upstream magnetic beam splitter (see photo 7612017) into three separated beams passes through different parts of its aperture: right, left up, left down. These magnets were designed to be concrete-insulated for radiation resistance. F. Streun stands on the right.

  9. Antioxidants: Characterization, natural sources, extraction and analysis

    OpenAIRE

    OROIAN, MIRCEA; Escriche Roberto, Mª Isabel

    2015-01-01

    [EN] Recently many review papers regarding antioxidants fromdifferent sources and different extraction and quantification procedures have been published. However none of them has all the information regarding antioxidants (chemistry, sources, extraction and quantification). This article tries to take a different perspective on antioxidants for the new researcher involved in this field. Antioxidants from fruit, vegetables and beverages play an important role in human health, fo...

  10. Extraction of cesium from acid solutions

    International Nuclear Information System (INIS)

    Katykhin, G.S.; Simonov, A.S.

    1983-01-01

    The extraction of cesium from acidic solutions is studied. Halogen-substituted carboxylic acids were chosen for the aqueous phase and nitrobenzene the diluent. The distribution coefficients are determined by the use of radioactive tracers 134 Cs and 137 Cs. It is believed that large singly charged anions of strong acids are necessary for the extraction of cesium. Metal halide acids are selected for supplying the anions

  11. EXTRACTION OF URANYL NITRATE FROM AQUEOUS SOLUTIONS

    Science.gov (United States)

    Furman, N.H.; Mundy, R.J.

    1957-12-10

    An improvement in the process is described for extracting aqueous uranyl nitrate solutions with an organic solvent such as ether. It has been found that the organic phase will extract a larger quantity of uranyl nitrate if the aqueous phase contains in addition to the uranyl nitrate, a quantity of some other soluble nitrate to act as a salting out agent. Mentioned as suitable are the nitrates of lithium, calcium, zinc, bivalent copper, and trivalent iron.

  12. Synthesis and Charaterization of organophosphorus extractants

    International Nuclear Information System (INIS)

    Allal, F.; Zaoui, B.; Attou, M.

    1997-04-01

    Liquid-Liquid extraction takes an important place within the treatment of nuclear combustible this process has been used to recover uranium from wet process phosphoric acid. The main aim of the present work is the preparation and characterisation of two organophosphoric esters, used as extractant of heavy metal such as uranium and rare earths metals. The synthetized products are: mono and di [4(1.1.3.3 tetramethyl butyl) phenyl] phosphoric acid (MOPPA and DOPPA)

  13. Rate phenomena in uranium extraction by amines

    International Nuclear Information System (INIS)

    Coleman, C.F.; McDowell, W.J.

    1979-01-01

    Kinetics studies and other rate measurements are reviewed in the amine extraction of uranium and of some other related and associated metal ions. Equilibration is relatively fast in the uranium sulfate systems most important to uranium hydrometallurgy. Significantly slow equilibration has been encountered in some other systems. Most of the recorded rate information, both qualitative and quantitative, has come from exploratory and process-development work, while some kinetics studies have been directed specifically toward elucidation of extraction mechanisms. 71 references

  14. Natural Gas Extraction, Earthquakes and House Prices

    OpenAIRE

    Hans R.A. Koster; Jos N. van Ommeren

    2015-01-01

    The production of natural gas is strongly increasing around the world. Long-run negative external effects of extraction are understudied and often ignored in social) cost-benefit analyses. One important example is that natural gas extraction leads to soil subsidence and subsequent induced earthquakes that may occur only after a couple of decades. We show that induced earthquakes that are noticeable to residents generate substantial non-monetary economic effects, as measured by their effects o...

  15. Pharmacokinetics of Botanical Drugs and Plant Extracts.

    Science.gov (United States)

    Dominguez More, Gina Paola; Cardenas, Paola Andrea; Costa, Geison M; Simoes, Claudia M O; Aragon, Diana Marcela

    2017-01-01

    Botanical drugs contain plant extracts, which are complex mixtures of compounds. As with conventional drugs, it is necessary to validate their efficacy and safety through preclinical and clinical studies. However, pharmacokinetic studies for active constituents or characteristic markers in botanical drugs are rare. The objective of this review was to investigate the global state of the art in pharmacokinetic studies of active ingredients present in plant extracts and botanical drugs. A review of pharmacokinetics studies of chemical constituents of plant extracts and botanical drugs was performed, with a total of 135 studies published between January 2004 and February 2015 available in recognized scientific databases. Botanical preparations were mainly found in the form of aqueous extracts of roots and rhizomes. The most widely studied species was Salvia miltiorrhiza Bunge, and the compound most frequently used as a pharmacokinetic marker was berberine. Most studies were performed using the Sprague Dawley rat model, and the preparations were mainly administered orally in a single dose. Quantification of plasma concentrations of pharmacokinetic markers was performed mainly by liquid-liquid extraction, followed by high performance liquid chromatography coupled to mass spectrometry detector. In conclusion, in recent years there has been an increasing interest among researchers worldwide in the study of pharmacokinetics of bioactive compounds in botanical drugs and plant extracts, especially those from the Traditional Chinese Medicine. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  16. Screening for bioactivity of Mutinus elegans extracts

    Science.gov (United States)

    Gajendiran, A.; Cyriac, RE; Abraham, J.

    2017-11-01

    Mutinus elegans is a species of fungi that is commonly called as Elegant Stinkhorn. The aim of this study was to screen the crude extracts of the fungus for phytochemical analysis, antimicrobial activity, antioxidant assay and anticancer activity. Extraction of the fungal sample in Soxhlet apparatus was done with n-hexane and methanol as the solvent. Stock solutions of the crude methanol extract were prepared and used for microbiological assay. Thin layer chromatography was performed in order to determine the number of active components in n-hexane, and methanol solvent system for the fungus Mutinus elegans. Further, antioxidant assay was performed using DPPH radical scavenging assay. The fungal sample was then tested for cytotoxicity assay against MG63 osteosarcoma cell lines. The antimicrobial assay of Mutinus elegans extract exhibited activity against five pathogens. The zone of inhibition was measured with respect to standard antibiotics. Gas chromatography and Mass spectrometry (GC/MS analysis), revealed the presence of dibromo-tetradecan-1-ol-acetate, 2-myristynoyl-glycinamide, fumaric acid, and cyclohexylmethyldecyl ester compounds were presented in methanol and n-hexane extract of Mutinus elegans. The present study concludes the presence of bioactive compound in the extract which exhibited antimicrobial and antioxidant activity in Mutinus elegans.

  17. Antioxidant activity of Rafflesia kerrii flower extract.

    Science.gov (United States)

    Puttipan, Rinrampai; Okonogi, Siriporn

    2014-02-01

    Rafflesia kerrii has been used in Thai traditional remedies for treatment of several diseases. However, scientific data particularly on biological activities of this plant is very rare. The present study explores an antioxidant activity of R. kerrii flower (RKF). Extracting solvent and extraction procedure were found to play an important role on the activity of RKF extract. The extract obtained from water-ethanol system showed higher antioxidant activity than that from water-propylene glycol system. Fractionated extraction using different solvents revealed that methanol fractionated extract (RM) possessed the highest antioxidant activity with Trolox equivalent antioxidant capacity (TEAC) and inhibitory concentration of 50% inhibition (IC50) values of approximately 39 mM/mg and 3 μg/mL, respectively. Phytochemical assays demonstrated that RM contained extremely high quantity of phenolic content with gallic antioxidant equivalent (GAE) and quercetin equivalent (QE) values of approximately 312 mg/g and 16 mg/g, respectively. Ultraviolet-visible spectroscopy (UV- VIS) and high-pressure liquid chromatography (HPLC) indicated that gallic acid was a major component. RM which was stored at 40°C, 75% RH for 4 months showed slightly significant change (p antioxidant activity with zero order degradation. The results of this study could be concluded that R. kerrii flower was a promising natural source of strong antioxidant compounds.

  18. General well function for soil vapor extraction

    Science.gov (United States)

    Perina, Tomas

    2014-04-01

    This paper develops a well function applicable to extraction of groundwater or soil vapor from a well under the most common field test conditions. The general well function (Perina and Lee, 2006) [12] is adapted to soil vapor extraction and constant head boundary at the top. For groundwater flow, the general well function now applies to an extraction well of finite diameter with uniform drawdown along the screen, finite-thickness skin, and partially penetrating an unconfined, confined, and leaky aquifer, or an aquifer underneath a reservoir. With a change of arguments, the model applies to soil vapor extraction from a vadose zone with no cover or with leaky cover at the ground surface. The extraction well can operate in specified drawdown (pressure for soil vapor) or specified flowrate mode. Frictional well loss is computed as flow-only dependent component of the drawdown inside the extraction well. In general case, the calculated flow distribution is not proportional to screen length for a multiscreen well.

  19. Bacteremia associated with toothbrushing and dental extraction.

    Science.gov (United States)

    Lockhart, Peter B; Brennan, Michael T; Sasser, Howell C; Fox, Philip C; Paster, Bruce J; Bahrani-Mougeot, Farah K

    2008-06-17

    Antibiotic prophylaxis recommendations for the prevention of infective endocarditis are based in part on studies of bacteremia from dental procedures, but toothbrushing may pose a greater threat. The purpose of this study was to compare the incidence, duration, nature, and magnitude of endocarditis-related bacteremia from single-tooth extraction and toothbrushing and to determine the impact of amoxicillin prophylaxis on single-tooth extraction. In this double-blind, placebo-controlled study, 290 subjects were randomized to (1) toothbrushing, (2) single-tooth extraction with amoxicillin prophylaxis, or (3) single-tooth extraction with identical placebo. Blood was drawn for bacterial culturing and identification at 6 time points before, during, and after these interventions. The focus of our analysis was on bacterial species reported to cause infective endocarditis. We identified 98 bacterial species, 32 of which are reported to cause endocarditis. Cumulative incidence of endocarditis-related bacteria from all 6 blood draws was 23%, 33%, and 60% for the toothbrushing, extraction-amoxicillin, and extraction-placebo groups, respectively (Pextraction, given the greater frequency for oral hygiene, toothbrushing may be a greater threat for individuals at risk for infective endocarditis.

  20. Multiplexed Colorimetric Solid-Phase Extraction

    Science.gov (United States)

    Gazda, Daniel B.; Fritz, James S.; Porter, Marc D.

    2009-01-01

    Multiplexed colorimetric solid-phase extraction (MC-SPE) is an extension of colorimetric solid-phase extraction (C-SPE) an analytical platform that combines colorimetric reagents, solid phase extraction, and diffuse reflectance spectroscopy to quantify trace analytes in water. In CSPE, analytes are extracted and complexed on the surface of an extraction membrane impregnated with a colorimetric reagent. The analytes are then quantified directly on the membrane surface using a handheld diffuse reflectance spectrophotometer. Importantly, the use of solid-phase extraction membranes as the matrix for impregnation of the colorimetric reagents creates a concentration factor that enables the detection of low concentrations of analytes in small sample volumes. In extending C-SPE to a multiplexed format, a filter holder that incorporates discrete analysis channels and a jig that facilitates the concurrent operation of multiple sample syringes have been designed, enabling the simultaneous determination of multiple analytes. Separate, single analyte membranes, placed in a readout cartridge create unique, analyte-specific addresses at the exit of each channel. Following sample exposure, the diffuse reflectance spectrum of each address is collected serially and the Kubelka-Munk function is used to quantify each water quality parameter via calibration curves. In a demonstration, MC-SPE was used to measure the pH of a sample and quantitate Ag(I) and Ni(II).

  1. Oil extraction from algae: A comparative approach.

    Science.gov (United States)

    Valizadeh Derakhshan, Mehrab; Nasernejad, Bahram; Abbaspour-Aghdam, Farzin; Hamidi, Mohammad

    2015-01-01

    In this article, various methods including soxhlet, Bligh & Dyer (B&D), and ultrasonic-assisted B&D were investigated for the extraction of lipid from algal species Chlorella vulgaris. Relative polarity/water content and impolar per polar ratios of solvents were considered to optimize the relative proportions of each triplicate agent by applying the response surface method (RSM). It was found that for soxhlet, hexane-methanol (54-46%, respectively) with total lipid extraction of 14.65% and chloroform-methanol (54-46%, respectively) with the extraction of 19.87% lipid were the best set of triplicate where further addition of acetone to the first group and ethanol to the second group did not contributed to further extraction. In B&D, however, chloroform-methanol-water (50%-35%-15%, respectively) reached the all-time maximum of 24%. Osmotic shock as well as ultrasonication contributed to 3.52% of further extraction, which is considered to promote the total yield up to almost 15%. From the growth data and fatty acid analysis, the applied method was assessed to be appropriate for biodiesel production with regard to selectivity and extraction yield. © 2014 International Union of Biochemistry and Molecular Biology, Inc.

  2. Criticality safety of solvent extraction process

    International Nuclear Information System (INIS)

    Tachimori, Shoichi; Miyoshi, Yoshinori

    1987-01-01

    The article presents some comments on criticality safety of solvent extraction processes. When used as an extracting medium, tributyl phosphate extracts nitric acid and water, in addition to nitrates of U and Pu, into the organic phase. The amount of these chemical species extracted into the organic phase is dependent on and restricted by the concentrations of tributyl phosphate and other components. For criticality control, measures are taken to decrease the concentration of tributyl phosphate in the organic phase, in addition to control of the U and Pu concentrations in the feed water phase. It should be remembered that complexes of tributyl phosphate with nitrates of such metals as Pu(IV), Pu(VI), U(IV) and Th(IV) do not dissolve uniformly in the organic phase. In criticality calculation for solution-handling systems, U and Pu are generally assumed to have a valence of 6 and 4, respectively. In the reprocessing extraction process, however, U and Pu can have a valence of 4, and 3 and 6, respectively. The organic phase and aqueous phase contact in a counter-current flow. U and Pu will be accumulated if they are not brought out of the extraction system by this flow. (Nogami, K.)

  3. Using the DOM Tree for Content Extraction

    Directory of Open Access Journals (Sweden)

    David Insa

    2012-10-01

    Full Text Available The main information of a webpage is usually mixed between menus, advertisements, panels, and other not necessarily related information; and it is often difficult to automatically isolate this information. This is precisely the objective of content extraction, a research area of widely interest due to its many applications. Content extraction is useful not only for the final human user, but it is also frequently used as a preprocessing stage of different systems that need to extract the main content in a web document to avoid the treatment and processing of other useless information. Other interesting application where content extraction is particularly used is displaying webpages in small screens such as mobile phones or PDAs. In this work we present a new technique for content extraction that uses the DOM tree of the webpage to analyze the hierarchical relations of the elements in the webpage. Thanks to this information, the technique achieves a considerable recall and precision. Using the DOM structure for content extraction gives us the benefits of other approaches based on the syntax of the webpage (such as characters, words and tags, but it also gives us a very precise information regarding the related components in a block, thus, producing very cohesive blocks.

  4. Antiradical activity of Paulownia tomentosa (Scrophulariaceae) extracts.

    Science.gov (United States)

    Smejkal, Karel; Holubova, Pavla; Zima, Ales; Muselik, Jan; Dvorska, Margita

    2007-06-27

    Paulownia tomentosa is a large indecidous tree planted mostly for its fast growing wood and decorative purposes. The tree is also used in traditional Chinese medicine. As a part of our study of natural polyphenols, the fruits of Paulownia tomentosa were extracted by EtOH and than subjected to liquid/liquid extraction. Fractions were analysed by TLC and HPLC to determine presence of phenolic substances. We identified and quantified acteoside (1) and isoacteoside (2) in the EtOAc and n-BuOH extracts; mimulone (3) and diplacone (4) in the MeOH extract. To determine the antiradical activity of extracts we used the anti DPPH and peroxynitrite assays. The activity was expressed as Trolox C equivalents, IC50 for DPPH scavenging and a time dependency course was established. The polyphenols content was determined; results were expressed as gallic acid equivalents. Using these methods we found the fractions of the n-BuOH, EtOAc and MeOH extracts that display antiradical activity, which could be exploited as potential pharmaceuticals.

  5. Antiradical Activity of Paulownia tomentosa (Scrophulariaceae Extracts

    Directory of Open Access Journals (Sweden)

    Karel Smejkal

    2007-06-01

    Full Text Available Paulownia tomentosa is a large indecidous tree planted mostly for its fast growing wood and decoratative purposes. The tree is also used in traditional Chinese medicine. As a part of our study of natural polyphenols, the fruits of Paulownia tomentosa were extracted by EtOH and than subjected to liquid/liquid extraction. Fractions were analysed by TLC and HPLC to determine presence of phenolic substantaces. We identified and quantified acteoside (1 and isoacteoside (2 in the EtOAc and n-BuOH extracts; mimulone (3 and diplacone (4 in the MeOH extract. To determine the antiradical activity of extracts we used the anti DPPH and peroxynitrite assays. The activity was expressed as Trolox C equivalents, IC50 for DPPH scavenging and a time dependency course was established. The polyphenols content was determined; results were expressed as gallic acid equivalents. Using these methods we found the fractions of the n-BuOH, EtOAc and MeOH extracts that display antiradical activity, which could be exploited as potential pharmaceuticals.

  6. Process for the gas extraction of coal

    Energy Technology Data Exchange (ETDEWEB)

    Urquhart, D B

    1976-05-20

    The object of the invention is a process for the hydroextraction of coal is treated with water and carbon monoxide at a temperature in the region of 300 - 380/sup 0/C. After treatment is completed, the gases are separated from the treated gas; the treated coal is then extracted with an extraction medium during the gas phase at a temperature of at least 400/sup 0/C, the remainder is separated from the gas phase and the coal extract is obtained from the extraction medium. Hydrogenation is preferably carried out at a temperature in the region of 320 - 370/sup 0/C and at a pressure of 200 - 400 at. The time required for treatment with carbon monoxide and water is 1/4 - 2 hours, and in special cases 3/4 - 1 1/2 hours. The coal material itself is nutty slack, of which more than 95% of the coal particles pass through a 1.5 mm mesh sieve. After the hydrogenation the extraction is carried out at a temperature in the region of 400 - 450/sup 0/C. The patent claims relate to the types of extraction media used.

  7. Development of mouthwash with Rosmarinus officinalis extract

    Directory of Open Access Journals (Sweden)

    Isabela Moreira Baumgratz de Paula

    2014-12-01

    Full Text Available Rosmarinus officinalis, which belongs to the Lamiaceaefamily, is a species of medicinal flora with therapeutic properties. In order to exploit the benefits of these properties, a mouthwash formulation was developed, with careful selection of raw materials to meet pharmacotechnical requirements. Extracts of the plant were incorporated into a mouthwash, which was shown to have inhibitory action in vitro against the micro-organisms commonly found in periodontics. Controls for assessing the quality of the drugs were carried out, quantifying phenols and flavonoids as chemical markers. Mouthwash solutions were formulated containing 0.1, 5 and 10% ethanol extract of R. officinalis; and 0.05, 5 and 10% of the hexane fraction of R. officinalis. In order to evaluate synergism, ethanol extract and hexane fraction were also added to formulations containing 0.05% sodium fluoride and 0.12% chlorhexidine digluconate. These formulations were assessed for inhibitory effect against the specific microorganisms involved in the process of bacterial plaque formation, S. mutans(ATCC25175 and C. albicans(ATCC 10231, frequently found in cases of oral infections. The agar diffusion method was used to evaluate the inhibitory activity of extracts and formulations. All mouthwash solutions displayed inhibitory activity having higher sensitivity to S. mutansfor the 5% ethanol extract+0.05% sodium fluoride, and greater sensitivity to C. albicansfor the 10% hexane fraction. Results were characterized by the appearance of a growth inhibition halo, justifying the utilization and association of extracts of R. officinalis.

  8. Supercritical fluid carbon dioxide extraction of actinides

    International Nuclear Information System (INIS)

    Rao, Ankita; Tomar, B.S.

    2016-01-01

    Supercritical fluid extraction (SFE) is a process akin to liquid-liquid or solvent extraction where a Supercritical fluid (SCF) is contacted with a solid/ liquid matrix for the purpose of separating the component of interest from the original matrix. Carbon dioxide is a preferred choice as supercritical fluid (SCF) owing to its moderate critical parameter (P c = 7.38 MPa and T c = 304.1K) coupled with radiation and chemical stability, non toxic nature and low cost. Despite widespread applications for extraction of organic compounds and associated advantages especially liquid waste minimization, the SFE of metal ions was left unexplored for quite some time, as direct metal ion extraction is inefficient due charge neutralization requirement and weak solute-solvent interaction. Neutral SCF soluble metal-ligand complexation is imperative and SFE of actinides was reported only in 1994. Several studies have been carried out on SFE of uranium, thorium and plutonium from nitric acid medium employing different sets of ligands (organophosphorus, diketones, amides). Especially attractive is the possibility of direct dissolution and extraction of actinides employing ligand-acid adducts (like TBP.HNO 3 adduct) from solid matrices of different stages of nuclear fuel cycle viz. ores, spent nuclear fuels and radioactive wastes. Also, partitioning of actinides from fission products has been explored in spent nuclear fuel. These studies on supercritical fluid extraction of actinides indicate a more efficient and environmentally sustainable technology. (author)

  9. A comparison of accelerated solvent extraction, Soxhlet extraction, and ultrasonic-assisted extraction for analysis of terpenoids and sterols in tobacco.

    Science.gov (United States)

    Shen, Jinchao; Shao, Xueguang

    2005-11-01

    The performance of accelerated solvent extraction in the analysis of terpenoids and sterols in tobacco samples was investigated and compared with those of Soxhlet extraction and ultrasonically assisted extraction with respect to yield, extraction time, reproducibility and solvent consumption. The results indicate that although the highest yield was achieved by Soxhlet extraction, ASE appears to be a promising alternative to classical methods since it is faster and uses less solvent, especially when applied to the investigation of large batch tobacco samples. However, Soxhlet extraction is still the preferred method for analyzing sterols since it gives a higher extraction efficiency than other methods.

  10. Evaluation of Soxhlet extraction, accelerated solvent extraction and microwave-assisted extraction for the determination of polychlorinated biphenyls and polybrominated diphenyl ethers in soil and fish samples

    International Nuclear Information System (INIS)

    Wang Pu; Zhang Qinghua; Wang Yawei; Wang Thanh; Li Xiaomin; Ding Lei; Jiang Guibin

    2010-01-01

    Three commonly applied extraction techniques for persistent organic chemicals, Soxhlet extraction (SE), accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE), were applied on soil and fish samples in order to evaluate their performances. For both PCBs and PBDEs, the two more recent developed techniques (ASE and MAE) were in general capable of producing comparable extraction results as the classical SE, and even higher extraction recoveries were obtained for some PCB congeners with large octanol-water partitioning coefficients (K ow ). This relatively uniform extraction results from ASE and MAE indicated that elevated temperature and pressure are favorable to the efficient extraction of PCBs from the solid matrices. For PBDEs, difference between the results from MAE and ASE (or SE) suggests that the MAE extraction condition needs to be carefully optimized according to the characteristics of the matrix and analyte to avoid degradation of higher brominated BDE congeners and improve the extraction yields.

  11. Evaluation of Soxhlet extraction, accelerated solvent extraction and microwave-assisted extraction for the determination of polychlorinated biphenyls and polybrominated diphenyl ethers in soil and fish samples

    Energy Technology Data Exchange (ETDEWEB)

    Wang Pu [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China); Zhang Qinghua, E-mail: qhzhang@rcees.ac.cn [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China); Wang Yawei; Wang Thanh; Li Xiaomin; Ding Lei; Jiang Guibin [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China)

    2010-03-17

    Three commonly applied extraction techniques for persistent organic chemicals, Soxhlet extraction (SE), accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE), were applied on soil and fish samples in order to evaluate their performances. For both PCBs and PBDEs, the two more recent developed techniques (ASE and MAE) were in general capable of producing comparable extraction results as the classical SE, and even higher extraction recoveries were obtained for some PCB congeners with large octanol-water partitioning coefficients (K{sub ow}). This relatively uniform extraction results from ASE and MAE indicated that elevated temperature and pressure are favorable to the efficient extraction of PCBs from the solid matrices. For PBDEs, difference between the results from MAE and ASE (or SE) suggests that the MAE extraction condition needs to be carefully optimized according to the characteristics of the matrix and analyte to avoid degradation of higher brominated BDE congeners and improve the extraction yields.

  12. Extraction of Tantalum from locally sourced Tantalite using ...

    African Journals Online (AJOL)

    acer

    Extraction of Tantalum from locally sourced Tantalite using ... ABSTRACT: The ability of polyethylene glycol solution to extract tantalum from locally .... metal ion in question by the particular extractant. ... Loparite, a rare-earth ore (Ce, Na,.

  13. Comparison of extraction and clean-up techniques for the ...

    African Journals Online (AJOL)

    user

    ultrasonication and mechanical shaking used in the extraction of a low-level PAH soil certified ... hydrocarbons (PAHs), soil, solid phase extraction (SPE), soxhlet extraction, ultrasonication. ... soxhlet) (Lopez-Avila et al., 1993) supercritical fluid.

  14. Antifungal activity of different extracts of Ageratum conyzoides for the ...

    African Journals Online (AJOL)

    Muhammad Arif Javed

    2012-06-19

    Jun 19, 2012 ... In case of aqueous extracts, the maximum reduction was observed in leaf extract (72%) ... antifungal and insecticidal agents (Hajlaoui et al., 2009). Extracts of many ..... growth reduction of mycelia of phytophthora on neem leaf.

  15. Extraction and determination of total flavonoids in jujube by alcohol extraction

    Science.gov (United States)

    Ji, Y. B.; Ru, X.; Yu, M.; Wang, S. W.; Lu, L.; Qiao, A. N.; Guo, A. Z.

    2017-12-01

    Jujube is a ripe fruit of Rhamnaceae. Its main active component is flavonoids, so the extraction and determination of total flavonoids in jujube will help to develop and utilize the medicinal value of jujube. In this study, the total flavonoids were extracted from jujube by alcohol extraction method. Through single factor investigation and orthogonal test, it was found that the total flavonoids content in jujube was the highest under the condition of 70°C, material ratio of 1:40, and extraction of 30 min by 70% ethanol. The content of total flavonoids in the extract of jujube was 1.57% at the wavelength of 510 nm by UV and rutin as the standard. The method was evaluated by methodological study, and it was determined that this method could be used as the detection of total flavonoids in jujube extraction.

  16. Improving extraction efficiency of the third integer resonant extraction using higher order multipoles

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K. A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Schoefer, V. [Brookhaven National Lab. (BNL), Upton, NY (United States); Tomizawa, M. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan)

    2017-03-09

    The new accelerator complex at J-PARC will operate with both high energy and very high intensity proton beams. With a design slow extraction efficiency of greater than 99% this facility will still be depositing significant beam power onto accelerator components [2]. To achieve even higher efficiencies requires some new ideas. The design of the extraction system and the accelerator lattice structure leaves little room for improvement using conventional techniques. In this report we will present one method for improving the slow extraction efficiency at J-PARC by adding duodecapoles or octupoles to the slow extraction system. We will review the theory of resonant extraction, describe simulation methods, and present the results of detailed simulations. From our investigations we find that we can improve extraction efficiency and thereby reduce the level of residual activation in the accelerator components and surrounding shielding.

  17. Estimating the extractability of potentially toxic metals in urban soils: A comparison of several extracting solutions

    International Nuclear Information System (INIS)

    Madrid, F.; Reinoso, R.; Florido, M.C.; Diaz Barrientos, E.; Ajmone-Marsan, F.; Davidson, C.M.; Madrid, L.

    2007-01-01

    Metals released by the extraction with aqua regia, EDTA, dilute HCl and sequential extraction (SE) by the BCR protocol were studied in urban soils of Sevilla, Torino, and Glasgow. By multivariate analysis, the amounts of Cu, Pb and Zn liberated by any method were statistically associated with one another, whereas other metals were not. The mean amounts of all metals extracted by HCl and by SE were well correlated, but SE was clearly underestimated by HCl. Individual data for Cu, Pb and Zn by both methods were correlated only if each city was considered separately. Other metals gave poorer relationships. Similar conclusions were reached comparing EDTA and HCl, with much lower values for EDTA. Dilute HCl extraction cannot thus be recommended for general use as alternative to BCR SE in urban soils. - Dilute HCl extraction is tested as an alternative to the BCR sequential extraction in urban soils

  18. Plant location and extraction procedure strongly alter the antimicrobial activity of murta extracts

    DEFF Research Database (Denmark)

    Shene, Carolina; Reyes, Agnes K.; Villarroel, Mario

    2009-01-01

    plants grown nearer to the mountain (58 mg GAE/g murta), subjected to extreme summer/winter-day/night temperature changes and rainy regime. Extracts from leaves collected in the valley and coast contained 46 and 40 mg GAE/g murta, respectively. A mixture of 50% ethanol/water was the most efficient......Leaves and fruits of Murta (Ugni Molinae Turcz.) growing in three locations of Chile with diverse climatic conditions were extracted by using ethanol/water mixtures at different ratios and the antimicrobial activity was assessed. Extracts containing the highest polyphenolic content were from murta...... in extracting polyphenols, showing pure solvents-both water and ethanol-a lower extraction capacity. No correlation between antioxidant capacity and polyphenolic content was found. Extracts from Murta leaves provoked a decrease in the growing of Pseudomonas aeruginosa, Klebsiella pneumoniae and Staphylococcus...

  19. Biological activity and safety of Tripterygium extract prepared by sodium carbonate extraction.

    Science.gov (United States)

    Fang, Wei; Peng, Fan; Yi, Tao; Zhang, Cong; Wan, Chunxi; Xu, Huibi; Lam, Christopher Waikei; Yang, Xiangliang

    2012-09-17

    The commercial preparation named “Tripterygium glycosides” prepared by column chromatography has been used for the treatment of inflammatory and autoimmune diseases with significant efficacy but concurrent toxicity. The aim of this study was to reduce the toxicity of Tripterygium extracts, using cytotoxicity and anti-inflammatory activity of the three principal active components of Tripterygium wilfordii Hook. F. (TWHF)as guiding parameters. Column chromatography was replaced by sodium carbonate extraction for removing the acidic compounds and enriching epoxyditerpenoids and alkaloids in the extract. Results showed that the therapeutic index (IC50/EC50) on murine macrophage Raw 264.7 cells and rat mesangial HBZY-1 cells of the extract prepared by sodium carbonate extraction was significantly higher than that of Tripterygium glycosides(0.8 and 5.2 vs. 0.3 and 2.6, p sodium carbonate extraction may represent a potentially optimal source of medicine with good therapeutic index.

  20. Evaluation of vacuum microwave-assisted extraction technique for the extraction of antioxidants from plant samples.

    Science.gov (United States)

    Xiao, Xiao-Hua; Wang, Jun-Xia; Wang, Gang; Wang, Jia-Yue; Li, Gong-Ke

    2009-12-18

    In the present work, vacuum microwave-assisted extraction (VMAE) was to perform microwave-assisted extraction in vacuum. Two well-known antioxidants, vitamin C from guava and green pepper, and vitamin E (alpha-tocopherol and gamma-tocopherol) from soybean and tea leaves, which were easy to be oxidized, were chosen as representative target compounds for the evaluation of VMAE. The extraction yields of vitamin C, alpha-tocopherol and gamma-tocopherol in VMAE and those in MAE performed in atmosphere (air-MAE) were compared and the effects of extraction time, extraction temperature and sample matrix were studied. Moreover, the effects of the oxygen and subpressure invacuo were also discussed via performed MAE in N(2) atmosphere (N(2)-MAE). The extraction yields of vitamin C, alpha-tocopherol and gamma-tocopherol in VMAE were higher than that in air-MAE, 35% increments of vitamin C from green pepper, 22% increments of alpha-tocopherol and 47% increments of gamma-tocopherol from tea leaves were obtained, respectively. The comparable increased extraction yields of vitamin C, alpha-tocopherol and gamma-tocopherol in N(2)-MAE to that in air-MAE confirmed that oxygen in system was the crucial factor for the oxidation of vitamin C and vitamin E, VMAE was beneficial for the extraction of these oxygen-sensitive compounds. In addition, the subpressure invacuo in the VMAE system also showed positive affect on the extraction yields. On the basis of preventing oxidation and improving extraction efficiency of target compounds because of less oxygen and subpressure invacuo in the extraction system, VMAE has good potential for the extraction of oxygen-sensitive and thermosensitive compounds from plant samples.