Beginning C# Object-Oriented Programming

CERN Document Server

Clark, Dan

2011-01-01

Beginning C# Object-Oriented Programming brings you into the modern world of development as you master the fundamentals of programming with C# and learn to develop efficient, reusable, elegant code through the object-oriented programming (OOP) methodology. Take your skills out of the 20th century and into this one with Dan Clark's accessible, quick-paced guide to C# and object-oriented programming, completely updated for .NET 4.0 and C# 4.0. As you develop techniques and best practices for coding in C#, one of the world's most popular contemporary languages, you'll experience modeling a "real

Object-oriented alarm-filtering system

International Nuclear Information System (INIS)

Corsberg, D.R.; Wilkie, D.

1986-01-01

This paper discusses an alarm-filtering system (AFS) being developed by EG and G Idaho, Inc. for the Advanced Test Reactor (ATR) at the Idaho National Engineering Laboratory. The ultimate goal of this project is to place AFS into ATR's reactor control room to act as an aid during major plant transients. In addition, methods of alarm analysis are investigated based on functional relationships rather than on a historical approach utilizing cause-consequence trees. Artificial intelligence techniques, including object-oriented programming, are also demonstrated as useful in analyzing alarms and alarm sequences. After a brief description of the problem AFS addresses, this paper discusses the design constraints and human factors that influenced the development of the system. The reader is then presented with operational and architectural descriptions of the system as well as what directions the future development of AFS may take. The fact that AFS is being considered as a partial solution to the problems discussed in the next section demonstrates the viability of its underlying technology and approach. 10 refs

Object oriented fault diagnosis system for space shuttle main engine redlines

Science.gov (United States)

Rogers, John S.; Mohapatra, Saroj Kumar

1990-01-01

A great deal of attention has recently been given to Artificial Intelligence research in the area of computer aided diagnostics. Due to the dynamic and complex nature of space shuttle red-line parameters, a research effort is under way to develop a real time diagnostic tool that will employ historical and engineering rulebases as well as a sensor validity checking. The capability of AI software development tools (KEE and G2) will be explored by applying object oriented programming techniques in accomplishing the diagnostic evaluation.

Three Object-Oriented enhancement for EPICS

Science.gov (United States)

Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

1994-12-01

In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

Exploring object-oriented technologies

CERN Multimedia

2000-01-01

Object oriented technologies are the corner stone of modern software development. A piece of software is today conceived, constructed and tested as a set of objects interacting with each other, rather than as a large sequential program. OO is present throughout the whole software life cycle allowing for maintainable code re-use, clean design and manageable complexity. OO is also the seed upon which other technologies are being built and deployed, such as distributed computing, component models, open interoperability, etc.This series of three seminars will provide a pragmatic overview on the main ideas behind OO software development and will explain the inner workings of the most outstanding technologies being built on OO, such as UML, CORBA, Component Models, Agent Oriented Computing, Business Objects, etc.

Object-oriented programming with mixins in Ada

Science.gov (United States)

Seidewitz, ED

1992-01-01

Recently, I wrote a paper discussing the lack of 'true' object-oriented programming language features in Ada 83, why one might desire them in Ada, and how they might be added in Ada 9X. The approach I took in this paper was to build the new object-oriented features of Ada 9X as much as possible on the basic constructs and philosophy of Ada 83. The object-oriented features proposed for Ada 9X, while different in detail, are based on the same kind of approach. Further consideration of this approach led me on a long reflection on the nature of object-oriented programming and its application to Ada. The results of this reflection, presented in this paper, show how a fairly natural object-oriented style can indeed be developed even in Ada 83. The exercise of developing this style is useful for at least three reasons: (1) it provides a useful style for programming object-oriented applications in Ada 83 until new features become available with Ada 9X; (2) it demystifies many of the mechanisms that seem to be 'magic' in most object-oriented programming languages by making them explicit; and (3) it points out areas that are and are not in need of change in Ada 83 to make object-oriented programming more natural in Ada 9X. In the next four sections I will address in turn the issues of object-oriented classes, mixins, self-reference and supertyping. The presentation is through a sequence of examples. This results in some overlap with that paper, but all the examples in the present paper are written entirely in Ada 83. I will return to considerations for Ada 9X in the last section of the paper.

An object-oriented approach to energy-economic modeling

Energy Technology Data Exchange (ETDEWEB)

Wise, M.A.; Fox, J.A.; Sands, R.D.

1993-12-01

In this paper, the authors discuss the experiences in creating an object-oriented economic model of the U.S. energy and agriculture markets. After a discussion of some central concepts, they provide an overview of the model, focusing on the methodology of designing an object-oriented class hierarchy specification based on standard microeconomic production functions. The evolution of the model from the class definition stage to programming it in C++, a standard object-oriented programming language, will be detailed. The authors then discuss the main differences between writing the object-oriented program versus a procedure-oriented program of the same model. Finally, they conclude with a discussion of the advantages and limitations of the object-oriented approach based on the experience in building energy-economic models with procedure-oriented approaches and languages.

Object-orientated DBMS techniques for time-oriented medical record.

Science.gov (United States)

Pinciroli, F; Combi, C; Pozzi, G

1992-01-01

In implementing time-orientated medical record (TOMR) management systems, use of a relational model played a big role. Many applications have been developed to extend query and data manipulation languages to temporal aspects of information. Our experience in developing TOMR revealed some deficiencies inside the relational model, such as: (a) abstract data type definition; (b) unified view of data, at a programming level; (c) management of temporal data; (d) management of signals and images. We identified some first topics to face by an object-orientated approach to database design. This paper describes the first steps in designing and implementing a TOMR by an object-orientated DBMS.

Object-oriented programming with gradual abstraction

DEFF Research Database (Denmark)

Nørmark, Kurt; Thomsen, Lone Leth; Thomsen, Bent

2013-01-01

We describe an experimental object-oriented programming language, ASL2, that supports program development by means of a series of abstraction steps. The language allows immediate object construction, and it is possible to use the constructed objects for concrete problem solving tasks. Classes...... restrictive. As a central mechanism, weakly classified objects are allowed to borrow methods from each other. ASL2 supports class generalization, as a counterpart to class specialization and inheritance in mainstream object-oriented programming languages. The final abstraction step discussed in this paper...

Validation techniques for object-oriented proof outlines

NARCIS (Netherlands)

Pierik, C.

2006-01-01

This thesis presents a proof outline logic for a simple object-oriented programming language. The language has all object-oriented features of popular programming languages like Java and C#. In particular, it supports inheritance, field shadowing, aliasing, dynamic object creation, subtype

An object-oriented description method of EPMM process

Science.gov (United States)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

An Object-Oriented Approach to C++ Compiler Technology

NARCIS (Netherlands)

Sminchisescu, Cristian; Telea, Alexandru

1999-01-01

This paper focuses on the use of object-oriented approaches to syntactical and semantical analysis for complex object-oriented languages like C++. We are interested in these issues both from a design and implementation point of view. We implement a semantic analyzer in an object-oriented manner,

OBJECT-ORIENTED PROGRAMMING IN SCHOOL COURSE OF INFORMATICS

Directory of Open Access Journals (Sweden)

Хамид Абдулович Гербеков

2017-12-01

Full Text Available In article approaches to training of student in object-oriented programming in the environment of the Windows operating system are considered. The analysis of the literature on the programming and the modern school textbook on informatics, and also theoretical material on object-oriented programming within the informative line “Algorithmization and programming” of school course of informatics is for this purpose carried out. The object-oriented approached essentially differs from structured programming in fact that the object-oriented programming paradigm is more open and scalable. It doesn’t mean that transition to the object-oriented approach to programming demands a failure from all algorithm applied in case of structural pro-applications of all earlier found and tested method and receptions. On the contrary new elements are always based on prior experience. Object approach creates a set of essential convenience which under other conditions can’t provide. Object-oriented programming in the environment of the Windows operating system to interest student from the first lesson and to do training fascinating and interesting because student can control object which the modern students face since the childhood on the personal computers, pads and phones.

Plug & Play object oriented Bayesian networks

DEFF Research Database (Denmark)

Bangsø, Olav; Flores, J.; Jensen, Finn Verner

2003-01-01

been shown to be quite suitable for dynamic domains as well. However, processing object oriented Bayesian networks in practice does not take advantage of their modular structure. Normally the object oriented Bayesian network is transformed into a Bayesian network and, inference is performed...... dynamic domains. The communication needed between instances is achieved by means of a fill-in propagation scheme....

Object orientation affects spatial language comprehension.

Science.gov (United States)

Burigo, Michele; Sacchi, Simona

2013-01-01

Typical spatial descriptions, such as "The car is in front of the house," describe the position of a located object (LO; e.g., the car) in space relative to a reference object (RO) whose location is known (e.g., the house). The orientation of the RO affects spatial language comprehension via the reference frame selection process. However, the effects of the LO's orientation on spatial language have not received great attention. This study explores whether the pure geometric information of the LO (e.g., its orientation) affects spatial language comprehension using placing and production tasks. Our results suggest that the orientation of the LO influences spatial language comprehension even in the absence of functional relationships. Copyright © 2013 Cognitive Science Society, Inc.

Parallel object-oriented term rewriting : the booleans

NARCIS (Netherlands)

Rodenburg, P.H.; Vrancken, J.L.M.

As a first case study in parallel object-oriented term rewriting, we give two implementations of term rewriting algorithms for boolean terms, using the parallel object-oriented features of the language Pool-T. The term rewriting systems are specified in the specification formalism

Object oriented approach to B reconstruction

International Nuclear Information System (INIS)

Katayama, N.

1992-01-01

The complexity of full and partial reconstruction of B mesons has led CLEO to use object oriented techniques to do physics data analyses. An object oriented language for HEP data analysis was designed, a compiler which translates the user code into C++ source code, has been written using the UNIX tools, lex and yacc. The resulting C++ code can be linked and run in the normal CLEO data analysis system

Partial Evaluation for Class-Based Object-Oriented Languages

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2001-01-01

Object-oriented programming facilitates the development of generic software, but at a significant cost in terms of performance. We apply partial evaluation to object-oriented programs, to automatically map generic software into specific implementations. In this paper we give a concise, formal...... description of a simple partial evaluator for a minimal object-oriented language, and give directions for extending this partial evaluator to handle realistic programs....

A Survey of Various Object Oriented Requirement Engineering Methods

OpenAIRE

Anandi Mahajan; Dr. Anurag Dixit

2013-01-01

In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

TEACHING OBJECT ORIENTED PROGRAMMING AT THE INTRODUCTORY LEVEL

OpenAIRE

OKUR , Prof.Dr. Mehmet C.

2006-01-01

Teaching object oriented programming has become a rapidly expanding preference at various educational environments. However, teachers usually experience problems when introducing object oriented concepts and programming to beginners. How to teach the fundamentals of object oriented programming at an introductory level course is still a common subject for debate. In this paper, an evaluation of these problems is presented and some possible approaches for improving the quality and success of su...

Channels as Objects in Concurrent Object-Oriented Programming

Directory of Open Access Journals (Sweden)

Joana Campos

2011-10-01

Full Text Available There is often a sort of a protocol associated to each class, stating when and how certain methods should be called. Given that this protocol is, if at all, described in the documentation accompanying the class, current mainstream object-oriented languages cannot provide for the verification of client code adherence against the sought class behaviour. We have defined a class-based concurrent object-oriented language that formalises such protocols in the form of usage types. Usage types are attached to class definitions, allowing for the specification of (1 the available methods, (2 the tests clients must perform on the result of methods, and (3 the object status - linear or shared - all of which depend on the object's state. Our work extends the recent approach on modular session types by eliminating channel operations, and defining the method call as the single communication primitive in both sequential and concurrent settings. In contrast to previous works, we define a single category for objects, instead of distinct categories for linear and for shared objects, and let linear objects evolve into shared ones. We introduce a standard sync qualifier to prevent thread interference in certain operations on shared objects. We formalise the language syntax, the operational semantics, and a type system that enforces by static typing that methods are called only when available, and by a single client if so specified in the usage type. We illustrate the language via a complete example.

A new object-oriented interface to MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; Fredian, T.; Stillerman, J.

2010-01-01

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

A new object-oriented interface to MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.i [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy); Fredian, T.; Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States)

2010-07-15

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multiplatform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in Uniform Modeling Language (UML). Based on this description the new API has been implemented so far in C++, Python, and Java. The new API provides data type management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances, and pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus object-oriented API to be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus.

Object oriented development of engineering software using CLIPS

Science.gov (United States)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

Object-Oriented Type Inference

DEFF Research Database (Denmark)

Schwartzbach, Michael Ignatieff; Palsberg, Jens

1991-01-01

We present a new approach to inferring types in untyped object-oriented programs with inheritance, assignments, and late binding. It guarantees that all messages are understood, annotates the program with type information, allows polymorphic methods, and can be used as the basis of an op...

Object oriented programming in simulation of ions transport

International Nuclear Information System (INIS)

Zhang Wenyong; Wang Tongquan; Xiao Yabin; Dai Hongyi; Chen Yuzhong

2001-01-01

Using Object Oriented Programming (OOP) method can make our program more reliable and easier to read, debug, maintain and upgrade. This paper compared FORTRAN90-the language widely used in science computing with C ++ --An Object Oriented Language, and the conclusion was made that although FORTRAN90 have many deficiencies, it can be used in Object Oriented programming. Then OOP method was used in programming of Monte Carlo simulation of ions transport and the general process of OOP was given

Object-Oriented Programming in High Schools the Turing Way.

Science.gov (United States)

Holt, Richard C.

This paper proposes an approach to introducing object-oriented concepts to high school computer science students using the Object-Oriented Turing (OOT) language. Students can learn about basic object-oriented (OO) principles such as classes and inheritance by using and expanding a collection of classes that draw pictures like circles and happy…

Classification of quantum relativistic orientable objects

Energy Technology Data Exchange (ETDEWEB)

Gitman, D M [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318-CEP, 05315-970, Sao Paulo, SP (Brazil); Shelepin, A L, E-mail: gitman@dfn.if.usp.br, E-mail: alex@shelepin.msk.ru [Moscow Institute of Radio Engineering, Electronics and Automation, Prospect Vernadskogo, 78, 117454 Moscow (Russian Federation)

2011-01-15

Extending our previous work 'Fields on the Poincare group and quantum description of orientable objects' (Gitman and Shelepin 2009 Eur. Phys. J. C 61 111-39), we consider here a classification of orientable relativistic quantum objects in 3+1 dimensions. In such a classification, one uses a maximal set of ten commuting operators (generators of left and right transformations) in the space of functions on the Poincare group. In addition to the usual six quantum numbers related to external symmetries (given by left generators), there appear additional quantum numbers related to internal symmetries (given by right generators). Spectra of internal and external symmetry operators are interrelated, which, however, does not contradict the Coleman-Mandula no-go theorem. We believe that the proposed approach can be useful for the description of elementary spinning particles considered as orientable objects. In particular, it gives a group-theoretical interpretation of some facts of the existing phenomenological classification of spinning particles.

Classification of quantum relativistic orientable objects

International Nuclear Information System (INIS)

Gitman, D M; Shelepin, A L

2011-01-01

Extending our previous work 'Fields on the Poincare group and quantum description of orientable objects' (Gitman and Shelepin 2009 Eur. Phys. J. C 61 111-39), we consider here a classification of orientable relativistic quantum objects in 3+1 dimensions. In such a classification, one uses a maximal set of ten commuting operators (generators of left and right transformations) in the space of functions on the Poincare group. In addition to the usual six quantum numbers related to external symmetries (given by left generators), there appear additional quantum numbers related to internal symmetries (given by right generators). Spectra of internal and external symmetry operators are interrelated, which, however, does not contradict the Coleman-Mandula no-go theorem. We believe that the proposed approach can be useful for the description of elementary spinning particles considered as orientable objects. In particular, it gives a group-theoretical interpretation of some facts of the existing phenomenological classification of spinning particles.

Object-oriented programming for the biosciences.

Science.gov (United States)

Wiechert, W; Joksch, B; Wittig, R; Hartbrich, A; Höner, T; Möllney, M

1995-10-01

The development of software systems for the biosciences is always closely connected to experimental practice. Programs must be able to handle the inherent complexity and heterogeneous structure of biological systems in combination with the measuring equipment. Moreover, a high degree of flexibility is required to treat rapidly changing experimental conditions. Object-oriented methodology seems to be well suited for this purpose. It enables an evolutionary approach to software development that still maintains a high degree of modularity. This paper presents experience with object-oriented technology gathered during several years of programming in the fields of bioprocess development and metabolic engineering. It concentrates on the aspects of experimental support, data analysis, interaction and visualization. Several examples are presented and discussed in the general context of the experimental cycle of knowledge acquisition, thus pointing out the benefits and problems of object-oriented technology in the specific application field of the biosciences. Finally, some strategies for future development are described.

A Conceptual Approach to Teaching Object-Orientation to C Programmers

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Torgersen, Mads; Røn, Henrik

1998-01-01

This paper describes experiences from a three-day course held as part of a collaborative research project, in which object-oriented programming was taught to a group of engineers who were all proficient C programmers. Our approach to teaching object-oriented programming focuses on conceptual...... modeling, emphasizing that object-orientation is not a bag of solutions and technology; rather, object-orientation is a means to understand, describe (model) and communicate. The paper describes a general approach to teaching object-oriented programming to C-programmers and reports on the experience from...

A heretic's view of the object-oriented paradigm

DEFF Research Database (Denmark)

Galle, Per

1998-01-01

A basic assumption of the object-oriented paradigm of computer programming and database thinking is that objects (including classes) are dynamic: classes have objects as instances which can be created, modified, and deleted. I argue that this leads to unnecessary conceptual difficulties, and sugg......A basic assumption of the object-oriented paradigm of computer programming and database thinking is that objects (including classes) are dynamic: classes have objects as instances which can be created, modified, and deleted. I argue that this leads to unnecessary conceptual difficulties......, and suggest that although real world entities are undeniably dynamic and perishable, much may be gained by assuming that the objects we use for thinking about them are static. This, it is submitted, may prove to facilitate both practical system development and theoretical pursuits of a mathematically sound...... object-oriented data model....

An integrated environment for developing object-oriented CAE tools

Energy Technology Data Exchange (ETDEWEB)

Hofmann, P.; Ryba, M.; Baitinger, U.G. [Integrated System Engeneering, Stuttgart (Germany)

1996-12-31

This paper presents how object oriented techniques can applied to improve the development of CAE tools. For the design of modular and reusable software systems we use predefined and well tested building blocks. These building blocks are reusable software components based on object-oriented technology which allows the assembling of software systems. Today CAE tools are typically very complex and computation extensive. Therefore we need a concept, that join the advantages of the object-oriented paradigm with the advantages of parallel and distributed programming. So we present a design environment for the development of concurrent-object oriented CAE tools called CoDO.

Humanoid Robotics: Real-Time Object Oriented Programming

Science.gov (United States)

Newton, Jason E.

2005-01-01

Programming of robots in today's world is often done in a procedural oriented fashion, where object oriented programming is not incorporated. In order to keep a robust architecture allowing for easy expansion of capabilities and a truly modular design, object oriented programming is required. However, concepts in object oriented programming are not typically applied to a real time environment. The Fujitsu HOAP-2 is the test bed for the development of a humanoid robot framework abstracting control of the robot into simple logical commands in a real time robotic system while allowing full access to all sensory data. In addition to interfacing between the motor and sensory systems, this paper discusses the software which operates multiple independently developed control systems simultaneously and the safety measures which keep the humanoid from damaging itself and its environment while running these systems. The use of this software decreases development time and costs and allows changes to be made while keeping results safe and predictable.

C++, objected-oriented programming, and astronomical data models

Science.gov (United States)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

Towards a general object-oriented software development methodology

Science.gov (United States)

Seidewitz, ED; Stark, Mike

1986-01-01

Object diagrams were used to design a 5000 statement team training exercise and to design the entire dynamics simulator. The object diagrams are also being used to design another 50,000 statement Ada system and a personal computer based system that will be written in Modula II. The design methodology evolves out of these experiences as well as the limitations of other methods that were studied. Object diagrams, abstraction analysis, and associated principles provide a unified framework which encompasses concepts from Yourdin, Booch, and Cherry. This general object-oriented approach handles high level system design, possibly with concurrency, through object-oriented decomposition down to a completely functional level. How object-oriented concepts can be used in other phases of the software life-cycle, such as specification and testing is being studied concurrently.

On Converting Software Systems to Object Oriented Architectures

Directory of Open Access Journals (Sweden)

Gabriela Czibula

2010-06-01

Full Text Available Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs. Moreover, it would be useful to assist by automatic methods the software developers in transforming procedural code into an equivalent
object-oriented one. In this paper we aim at introducing a hierarchical clustering algorithm that can be used for assisting software developers in the process of transforming procedural code into an object-oriented architecture.

Perception of Sexual Orientation from Facial Structure: A Study with Artificial Face Models.

Science.gov (United States)

González-Álvarez, Julio

2017-07-01

Research has shown that lay people can perceive sexual orientation better than chance from face stimuli. However, the relation between facial structure and sexual orientation has been scarcely examined. Recently, an extensive morphometric study on a large sample of Canadian people (Skorska, Geniole, Vrysen, McCormick, & Bogaert, 2015) identified three (in men) and four (in women) facial features as unique multivariate predictors of sexual orientation in each sex group. The present study tested the perceptual validity of these facial traits with two experiments based on realistic artificial 3D face models created by manipulating the key parameters and presented to Spanish participants. Experiment 1 included 200 White and Black face models of both sexes. The results showed an overall accuracy (0.74) clearly above chance in a binary hetero/homosexual judgment task and significant differences depending on the race and sex of the face models. Experiment 2 produced five versions of 24 artificial faces of both sexes varying the key parameters in equal steps, and participants had to rate on a 1-7 scale how likely they thought that the depicted person had a homosexual sexual orientation. Rating scores displayed an almost perfect linear regression as a function of the parameter steps. In summary, both experiments demonstrated the perceptual validity of the seven multivariate predictors identified by Skorska et al. and open up new avenues for further research on this issue with artificial face models.

Object Oriented Programming in Director

Directory of Open Access Journals (Sweden)

Marian DARDALA

2006-01-01

Full Text Available Director is one of the most popular authoring software. As software for developing multimedia applications, Director is an object oriented programming environment. A very important issue to develop multimedia applications is the designing of their own classes. This paper presents the particular aspects concerning the available facilities offered by Lingo to design classes and to generate objects.

A Configurable, Object-Oriented, Transportation System Software Framework

Energy Technology Data Exchange (ETDEWEB)

KELLY,SUZANNE M.; MYRE,JOHN W.; PRICE,MARK H.; RUSSELL,ERIC D.; SCOTT,DAN W.

2000-08-01

The Transportation Surety Center, 6300, has been conducting continuing research into and development of information systems for the Configurable Transportation Security and Information Management System (CTSS) project, an Object-Oriented Framework approach that uses Component-Based Software Development to facilitate rapid deployment of new systems while improving software cost containment, development reliability, compatibility, and extensibility. The direction has been to develop a Fleet Management System (FMS) framework using object-oriented technology. The goal for the current development is to provide a software and hardware environment that will demonstrate and support object-oriented development commonly in the FMS Central Command Center and Vehicle domains.

Object-Oriented Plan Representation for the OMWG C2 Object Schema

National Research Council Canada - National Science Library

Reeves, Robert

1997-01-01

.... Chapter II discusses the theory and practice of modern Object Oriented modeling. The structure and conventions of object programming are covered as well as a method for information system abstraction...

Real-time object-oriented programming: studies and proposals

International Nuclear Information System (INIS)

Fouquier, Gilles

1996-01-01

This thesis contributes to the introduction of real-time features in object-oriented programming. Object-oriented programming favours modularity and reusability. Therefore, its application to real-time introduces many theoretical and conceptual problems. To deal with these problems, a new real-time object-oriented programming model is presented. This model is based on the active object model which allows concurrence and maintains the encapsulation property. The real-time aspect is treated by replacing the concept of task by the concept of method processing and by associating a real-time constraint to each message (priority or deadline). The set of all the running methods is scheduled. This model, called ATOME, contains several sub-models to deal with the usual concurrence control integrating their priority and deadline processing. The classical HPF and EDF scheduling avoid priority or deadline inversion. This model and its variants are new proposals to program real-time applications in the object-oriented way, therefore easing reusability and code writing. The feasibility of this approach is demonstrated by extending and existing active object-based language to real-time, in using the rules defined in the ATOME model. (author) [fr

Postural and Object-Oriented Experiences Advance Early Reaching, Object Exploration, and Means-End Behavior

Science.gov (United States)

Lobo, Michele A.; Galloway, James C.

2008-01-01

The effects of 3 weeks of social (control), postural, or object-oriented experiences on 9- to 21-week-old infants' (N = 42) reaching, exploration, and means-end behaviors were assessed. Coders recorded object contacts, mouthing, fingering, attention, and affect from video. Postural and object-oriented experiences advanced reaching, haptic…

An Ada-based preprocessor language for concurrent object oriented programming

International Nuclear Information System (INIS)

Almulla, M.; Al-Haddad, M.; Loeper, H.

2001-01-01

In this paper, implementation issues of concurrent-objected programming using Ada 95 are addressed. Ada is not a pure object-oriented language; in order to make it so, a uniform template for structuring object classes is proposed. The template constitutes a basis for an Ada-based preprocessor language that handles concurrent object-oriented programming. The preprocessor accepts Ada-like object-oriented programs (object classes, subclasses and main program) as input and produces Ada 95 concurrent object-oriented program units as output. The preprocessor language has the advantage of adding a new component to the class specification called the protocol, which specifies the order for requesting methods f an object. The preprocessor also touches on the extensibility of object classes issue. It supports defining class hierarchies by inheritance and aggregation. In addition, the preprocessor language supports the re-use of Ada packages, which are not necessarily written according to the object-oriented approach. The paper also investigates the definition of circular dependent object classes and proposes a solution for introducing a collection of classes. (author)

A layered semantics for a parallel object-oriented language

NARCIS (Netherlands)

P.H.M. America (Pierre); J.J.M.M. Rutten (Jan)

1990-01-01

textabstractWe develop a denotational semantics for POOL, a parallel object-oriented programming language. The main contribution of this semantics is an accurate mathematical model of the most important concept in object-oriented programming: the object. This is achieved by structuring the semantics

A Comparative Analysis of Structured and Object-Oriented ...

African Journals Online (AJOL)

The concepts of structured and object-oriented programming methods are not relatively new but these approaches are still very much useful and relevant in today's programming paradigm. In this paper, we distinguish the features of structured programs from that of object oriented programs. Structured programming is a ...

High Performance Object-Oriented Scientific Programming in Fortran 90

Science.gov (United States)

Norton, Charles D.; Decyk, Viktor K.; Szymanski, Boleslaw K.

1997-01-01

We illustrate how Fortran 90 supports object-oriented concepts by example of plasma particle computations on the IBM SP. Our experience shows that Fortran 90 and object-oriented methodology give high performance while providing a bridge from Fortran 77 legacy codes to modern programming principles. All of our object-oriented Fortran 90 codes execute more quickly thatn the equeivalent C++ versions, yet the abstraction modelling capabilities used for scentific programming are comparably powereful.

Object-oriented Programming Laws for Annotated Java Programs

Directory of Open Access Journals (Sweden)

Gabriel Falconieri Freitas

2010-03-01

Full Text Available Object-oriented programming laws have been proposed in the context of languages that are not combined with a behavioral interface specification language (BISL. The strong dependence between source-code and interface specifications may cause a number of difficulties when transforming programs. In this paper we introduce a set of programming laws for object-oriented languages like Java combined with the Java Modeling Language (JML. The set of laws deals with object-oriented features taking into account their specifications. Some laws deal only with features of the specification language. These laws constitute a set of small transformations for the development of more elaborate ones like refactorings.

Teaching Adaptability of Object-Oriented Programming Language Curriculum

Science.gov (United States)

Zhu, Xiao-dong

2012-01-01

The evolution of object-oriented programming languages includes update of their own versions, update of development environments, and reform of new languages upon old languages. In this paper, the evolution analysis of object-oriented programming languages is presented in term of the characters and development. The notion of adaptive teaching upon…

Apricot - An Object-Oriented Modeling Language for Hybrid Systems

OpenAIRE

Fang, Huixing; Zhu, Huibiao; Shi, Jianqi

2013-01-01

We propose Apricot as an object-oriented language for modeling hybrid systems. The language combines the features in domain specific language and object-oriented language, that fills the gap between design and implementation, as a result, we put forward the modeling language with simple and distinct syntax, structure and semantics. In addition, we introduce the concept of design by convention into Apricot.As the characteristic of object-oriented and the component architecture in Apricot, we c...

Object-Oriented Software Development Environments

DEFF Research Database (Denmark)

The book "Object-Oriented Environments - The Mjølner Approach" presents the collective results of the Mjølner Project. The project was set up to work on the widely recognized problems of developing, maintaining and understanding large software systems. The starting point was to use object...... and realizations User interfaces for environments and realizations Grammar-based software architectures Structure-based editing Language implementation, runtime organization, garbage collection Incremental compilation techniques...

Fast and accurate edge orientation processing during object manipulation

Science.gov (United States)

Flanagan, J Randall; Johansson, Roland S

2018-01-01

Quickly and accurately extracting information about a touched object’s orientation is a critical aspect of dexterous object manipulation. However, the speed and acuity of tactile edge orientation processing with respect to the fingertips as reported in previous perceptual studies appear inadequate in these respects. Here we directly establish the tactile system’s capacity to process edge-orientation information during dexterous manipulation. Participants extracted tactile information about edge orientation very quickly, using it within 200 ms of first touching the object. Participants were also strikingly accurate. With edges spanning the entire fingertip, edge-orientation resolution was better than 3° in our object manipulation task, which is several times better than reported in previous perceptual studies. Performance remained impressive even with edges as short as 2 mm, consistent with our ability to precisely manipulate very small objects. Taken together, our results radically redefine the spatial processing capacity of the tactile system. PMID:29611804

ZLIB++: Object-oriented numerical library for differential algebra

International Nuclear Information System (INIS)

Malitsky, N.; Reshetov, A.; Yan, Y.

1994-01-01

New software engineering tools and object-oriented design have a great impact on the software development process. But in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper we present the object-oriented version of ZLIB, numerical library for differential algebra and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

Multi-Modal Inference in Animacy Perception for Artificial Object

Directory of Open Access Journals (Sweden)

Kohske Takahashi

2011-10-01

Full Text Available Sometimes we feel animacy for artificial objects and their motion. Animals usually interact with environments through multiple sensory modalities. Here we investigated how the sensory responsiveness of artificial objects to the environment would contribute to animacy judgment for them. In a 90-s trial, observers freely viewed four objects moving in a virtual 3D space. The objects, whose position and motion were determined following Perlin-noise series, kept drifting independently in the space. Visual flashes, auditory bursts, or synchronous flashes and bursts appeared with 1–2 s intervals. The first object abruptly accelerated their motion just after visual flashes, giving an impression of responding to the flash. The second object responded to bursts. The third object responded to synchronous flashes and bursts. The forth object accelerated at a random timing independent of flashes and bursts. The observers rated how strongly they felt animacy for each object. The results showed that the object responding to the auditory bursts was rated as having weaker animacy compared to the other objects. This implies that sensory modality through which an object interacts with the environment may be a factor for animacy perception in the object and may serve as the basis of multi-modal and cross-modal inference of animacy.

Object oriented distributed programming: studies and proposals

International Nuclear Information System (INIS)

Guerraoui, Rachid

1992-01-01

This thesis contributes to the investigation of the object concept in distributed programming. Henceforth, this programming style has become a reality in the computer science world, since it allows to increase of the availability of applications and to decrease their execution time. Nevertheless, designing a distributed application is a hard task: the various abstraction levels that must be considered hinder the software reusability and maintenance, while errors and concurrent accesses are often sources of executions incoherence. The object concept improves the software modularity, and raises the computing abstraction level. Integrating distribution related aspects into the object model brings up the issues of expressing the concurrency and maintaining the coherency. The investigation of these problems in this thesis has been guided by a major concern for the preservation of the intrinsic properties of object-orientation, and the orthogonality of the solutions given. The main contributions of the thesis are: (i) the classification, regarding modularity, of the different design alternatives for object-oriented concurrent languages; (ii) the evaluation of various transactional mechanisms in object-based concurrent languages, and the design of an atomic asynchronous communication protocol named ACS; (iii) the definition of a transaction-based object-oriented concurrent language called KAROS; (iv) the implementation of a modular framework which allows to combine in a same application, various concurrency control and error recovery mechanisms; (v) the identification of a formal property, named general atomicity, which constitutes a correctness criteria for atomic objects specifications. (author) [fr

Concept of object-oriented intelligent support for nuclear reactor designing

International Nuclear Information System (INIS)

Yoshikawa, H.; Gofuku, A.

1991-01-01

A concept of object-oriented intelligent CAD/CAE environment is proposed for the conceptual designing of advanced nuclear reactor system. It is composed of (i) object-oriented frame-structure database which represents the hierarchical relationship of the composite elements of reactor core and the physical properties, and (ii) object-oriented modularization of the elementary calculation processes, which are needed for reactor core design analysis. As an example practise, an object-oriented frame structure is constructed for representing a 3D configuration of a special fuel element of a space reactor design, by using a general-purpose expert system shell ESHELL/X. (author)

From Functions to Object-Orientation by Abstraction

OpenAIRE

Diertens, Bob

2012-01-01

In previous work we developed a framework of computational models for function and object execution. The models on an higher level of abstraction in this framework allow for concurrent execution of functions and objects. We show that the computational model for object execution complies with the fundamentals of object-orientation.

Strong orientational coordinates and orientational order parameters for symmetric objects

International Nuclear Information System (INIS)

Haji-Akbari, Amir; Glotzer, Sharon C

2015-01-01

Recent advancements in the synthesis of anisotropic macromolecules and nanoparticles have spurred an immense interest in theoretical and computational studies of self-assembly. The cornerstone of such studies is the role of shape in self-assembly and in inducing complex order. The problem of identifying different types of order that can emerge in such systems can, however, be challenging. Here, we revisit the problem of quantifying orientational order in systems of building blocks with non-trivial rotational symmetries. We first propose a systematic way of constructing orientational coordinates for such symmetric building blocks. We call the arising tensorial coordinates strong orientational coordinates (SOCs) as they fully and exclusively specify the orientation of a symmetric object. We then use SOCs to describe and quantify local and global orientational order, and spatiotemporal orientational correlations in systems of symmetric building blocks. The SOCs and the orientational order parameters developed in this work are not only useful in performing and analyzing computer simulations of symmetric molecules or particles, but can also be utilized for the efficient storage of rotational information in long trajectories of evolving many-body systems. (paper)

Noncontact orientation of objects in three-dimensional space using magnetic levitation.

Science.gov (United States)

Subramaniam, Anand Bala; Yang, Dian; Yu, Hai-Dong; Nemiroski, Alex; Tricard, Simon; Ellerbee, Audrey K; Soh, Siowling; Whitesides, George M

2014-09-09

This paper describes several noncontact methods of orienting objects in 3D space using Magnetic Levitation (MagLev). The methods use two permanent magnets arranged coaxially with like poles facing and a container containing a paramagnetic liquid in which the objects are suspended. Absent external forcing, objects levitating in the device adopt predictable static orientations; the orientation depends on the shape and distribution of mass within the objects. The orientation of objects of uniform density in the MagLev device shows a sharp geometry-dependent transition: an analytical theory rationalizes this transition and predicts the orientation of objects in the MagLev device. Manipulation of the orientation of the levitating objects in space is achieved in two ways: (i) by rotating and/or translating the MagLev device while the objects are suspended in the paramagnetic solution between the magnets; (ii) by moving a small external magnet close to the levitating objects while keeping the device stationary. Unlike mechanical agitation or robotic selection, orienting using MagLev is possible for objects having a range of different physical characteristics (e.g., different shapes, sizes, and mechanical properties from hard polymers to gels and fluids). MagLev thus has the potential to be useful for sorting and positioning components in 3D space, orienting objects for assembly, constructing noncontact devices, and assembling objects composed of soft materials such as hydrogels, elastomers, and jammed granular media.

Elements of a Reversible Object-Oriented Language

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Axelsen, Holger Bock

2016-01-01

This paper presents initial ideas for the design and implementation of a reversible object-oriented language based on extending Janus with object-oriented concepts such as classes that encapsulate behavior and state, inheritance, virtual dispatching, as well as constructors. We show that virtual...... dispatching is a reversible decision mechanism easily translatable to a standard reversible programming model such as Janus, and we argue that reversible management of state can be accomplished using reversible constructors. The language is implemented in terms of translation to standard Janus programs....

Artificially modified collagen fibril orientation affects leather tear strength.

Science.gov (United States)

Kelly, Susyn J; Wells, Hannah C; Sizeland, Katie H; Kirby, Nigel; Edmonds, Richard L; Ryan, Tim; Hawley, Adrian; Mudie, Stephen; Haverkamp, Richard G

2018-07-01

Ovine leather has around half the tear strength of bovine leather and is therefore not suitable for high-value applications such as shoes. Tear strength has been correlated with the natural collagen fibril alignment (orientation index, OI). It is hypothesized that it could be possible to artificially increase the OI of the collagen fibrils and that an artificial increase in OI could increase tear strength. Ovine skins, after pickling and bating, were strained biaxially during chrome tanning. The strain ranged from 2 to 15% of the initial sample length, either uniformly in both directions by 10% or with 3% in one direction and 15% in the other. Once tanned, the leather tear strengths were measured and the collagen fibril orientation was measured using synchrotron-based small-angle X-ray scattering. The OI increased as a result of strain during tanning from 0.48 to 0.79 (P = 0.001) measured edge-on and the thickness-normalized tear strength increased from 27 to 43 N mm -1 (P leather was strained 10% in two orthogonal directions. This is evidence to support a causal relationship between high OI (measured edge-on), highly influenced by thickness, and tear strength. It also provides a method to produce stronger leather. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

ZLIB++: Object Oriented Numerical Library for Differential Algebra

International Nuclear Information System (INIS)

Yan, Yiton T

2003-01-01

New software engineering tools and object-oriented design have a great impact on the software development process. but in high energy physics all major packages were implemented in FORTRAN and porting of these codes to another language is rather complicated, primarily because of their huge size and heavy use of FORTRAN mathematical libraries. But some intrinsic accelerator concepts, such as nested structure of modern accelerators, look very pretty when implemented with the object-oriented approach. In this paper the authors present the object-oriented version of ZLIB, numerical library for differential algebra, and show how the modern approaches can simplify the development and support of accelerator codes, decrease code size, and allow description of complex mathematical transformations by simple language

An object-oriented simulation package for power plants

International Nuclear Information System (INIS)

Robinson, J.T.; Otaduy, P.J.

1987-01-01

This paper describes the application of object-oriented programming to the simulation of continuous/discrete processes such as nuclear power plants. Systems are modeled using this technique as a collection of objects that communicate by passing messages, which invoke methods that describe the state and dynamic behavior of objects. The objects themselves generally correspond to actual plant components, thus minimizing the representational mismatch between actual and modeled systems and facilitating their validation. Several concepts of object-oriented programming, in particular classes, inheritance, and message passing, have proved to be very useful for simulation. The use of these features are discussed and illustrated with examples

Object oriented JavaScript

CERN Document Server

Stefanov, Stoyan

2013-01-01

You will first be introduced to object-oriented programming, then to the basics of objects in JavaScript. This book takes a do-it-yourself approach when it comes to writing code, because the best way to really learn a programming language is by writing code. You are encouraged to type code into Firebug's console, see how it works and then tweak it and play around with it. There are practice questions at the end of each chapter to help you review what you have learned.For new to intermediate JavaScript developer who wants to prepare themselves for web development problems solved by smart JavaSc

Object-oriented fault tree evaluation program for quantitative analyses

Science.gov (United States)

Patterson-Hine, F. A.; Koen, B. V.

1988-01-01

Object-oriented programming can be combined with fault free techniques to give a significantly improved environment for evaluating the safety and reliability of large complex systems for space missions. Deep knowledge about system components and interactions, available from reliability studies and other sources, can be described using objects that make up a knowledge base. This knowledge base can be interrogated throughout the design process, during system testing, and during operation, and can be easily modified to reflect design changes in order to maintain a consistent information source. An object-oriented environment for reliability assessment has been developed on a Texas Instrument (TI) Explorer LISP workstation. The program, which directly evaluates system fault trees, utilizes the object-oriented extension to LISP called Flavors that is available on the Explorer. The object representation of a fault tree facilitates the storage and retrieval of information associated with each event in the tree, including tree structural information and intermediate results obtained during the tree reduction process. Reliability data associated with each basic event are stored in the fault tree objects. The object-oriented environment on the Explorer also includes a graphical tree editor which was modified to display and edit the fault trees.

Towards an Artificial Space Object Taxonomy

Science.gov (United States)

2013-09-01

earth Highly Eccentric Orbit (HEO) • Periapsis and apoapsis exist in two different orbit regimes • Because these objects are crossing through various...orbit regimes, they can be confused at any given instant with objects that never leave that particular regime • The orbit eccentricity is a primary...size, placement, and orientation of solar panels • Type of attitude control (CMGs, torque rods, reaction wheels , etc) • Type of orbit control

A Deductive and Typed Object-Oriented Language

NARCIS (Netherlands)

Bal, C.M.R.; Balsters, H.

1993-01-01

In this paper we introduce a logical query language extended with object-oriented typing facilities. This language, called DTL (from DataTypeLog), can be seen as an extension of Datalog equipped with complex objects, object identities, and multiple inheritance based on Cardelli type theory. The

Design and implementation of visual object-oriented LOGO using Prograph

OpenAIRE

Black, Emily M.; Fall, Thierno

1994-01-01

This thesis addresses the problem of how best to teach beginning programmers the necessary skills of object oriented programming. There is no established method of introducing object oriented concepts such as encapsulation, inheritance, and polymorphism, or providing an intuitive progression from simple programs to complex problem solving. The approach was to use two commercially available programming languages which we consider exemplify good object oriented programming techniques, to teach ...

Object Oriented Software Development Using A Use-Cases Approach

African Journals Online (AJOL)

Object Oriented Software Development Using A Use-Cases Approach. ... to the analysis and design of an online banking system using the Use-Cases method of Jacobson. ... thus bringing the benefits of object orientation into important software projects. Journal of Applied Sciences and Environmental Management Vol.

Object-Oriented Programming When Developing Software in Geology and Geophysics

Science.gov (United States)

Ahmadulin, R. K.; Bakanovskaya, L. N.

2017-01-01

The paper reviews the role of object-oriented programming when developing software in geology and geophysics. Main stages have been identified at which it is worthwhile to apply principles of object-oriented programming when developing software in geology and geophysics. The research was based on a number of problems solved in Geology and Petroleum Production Institute. Distinctive features of these problems are given and areas of application of the object-oriented approach are identified. Developing applications in the sphere of geology and geophysics has shown that the process of creating such products is simplified due to the use of object-oriented programming, firstly when designing structures for data storage and graphical user interfaces.

A new Object-oriented Interface to MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G. [Associazione EURATOM-ENEA sulla Fusione, Padua (Italy); Fredian, T. [MIT Plasma Science and Fusion Center, Littleton, NH (United States); Stillerman, J. [MIT Plasma Science and Fusion Center, Cambridge, MA (United States)

2009-07-01

The MDSplus data acquisition and management software package is widely used in the international fusion research community. Its core Application Programming Interface (API) remained unchanged since the system was ported to a multi platform environment in the late nineties. Originally written in C, the MDSplus API did not fully exploit several object-oriented features of the system that were included in the original architecture. In 2008 a project was initiated by the authors to provide the core MDSplus functionality with an object-oriented API. A generic, language-independent class structure has been defined and modeled in UML. Based on this description the new API has been implemented so far in C++, Python, and Java. Fortran 90 and Matlab interfaces are foreseen in 2009. The new API provides: - Data Type Management, allowing the full exploitation of the rich set of data types defined in MDSplus by means of composition of data object instances; - Pulse file access, for writing and reading data objects as well as managing database components properties. The definition of a language-independent class organization allows the MDSplus Object API be consistent across all the object oriented languages that will be supported. Regardless of the language used, this approach provides a much more natural programming interaction with MDSplus. Moreover, the UML graphical definition proved an effective and unambiguous way of documenting the system components. This document is composed of an abstract followed by the presentation transparencies. (authors)

A gridding method for object-oriented PIC codes

International Nuclear Information System (INIS)

Gisler, G.; Peter, W.; Nash, H.; Acquah, J.; Lin, C.; Rine, D.

1993-01-01

A simple, rule-based gridding method for object-oriented PIC codes is described which is not only capable of dealing with complicated structures such as multiply-connected regions, but is also computationally faster than classical gridding techniques. Using, these smart grids, vacant cells (e.g., cells enclosed by conductors) will never have to be stored or calculated, thus avoiding the usual situation of having to zero electromagnetic fields within conductors after valuable cpu time has been spent in calculating the fields within these cells in the first place. This object-oriented gridding technique makes use of encapsulating characteristics of actual physical objects (particles, fields, grids, etc.) in C ++ classes and supporting software reuse of these entities through C ++ class inheritance relations. It has been implemented in the form of a simple two-dimensional plasma particle-in-cell code, and forms the initial effort of an AFOSR research project to develop a flexible software simulation environment for particle-in-cell algorithms based on object-oriented technology

Concurrent object-oriented programming: The MP-Eiffel approach

OpenAIRE

Silva, Miguel Augusto Mendes Oliveira e

2004-01-01

This article evaluates several possible approaches for integrating concurrency into object-oriented programming languages, presenting afterwards, a new language named MP-Eiffel. MP-Eiffel was designed attempting to include all the essential properties of both concurrent and object-oriented programming with simplicity and safety. A special care was taken to achieve the orthogonality of all the language mechanisms, allowing their joint use without unsafe side-effects (such as inh...

An Implementation of the Object-Oriented Concurrent Programming Language SINA

NARCIS (Netherlands)

Triphathi, Anand; Berge, Eric; Aksit, Mehmet

SINA is an object-oriented language for distributed and concurrent programming. The primary focus of this paper is on the object-oriented concurrent programming mechanisms of SINA and their implementation. This paper presents the SINA constructs for concurrent programming and inter-object

USING OF OBJECT-ORIENTED DESIGN PRINCIPLES IN ELECTRIC MACHINES DEVELOPMENT

Directory of Open Access Journals (Sweden)

N.N. Zablodskii

2016-03-01

Full Text Available Purpose. To develop the theoretical basis of electrical machines object-oriented design, mathematical models and software to improve their design synthesis, analysis and optimization. Methodology. We have applied object-oriented design theory in electric machines optimal design and mathematical modelling of electromagnetic transients and electromagnetic field distribution. We have correlated the simulated results with the experimental data obtained by means of the double-stator screw dryer with an external solid rotor, brushless turbo-generator exciter and induction motor with squirrel cage rotor. Results. We have developed object-oriented design methodology, transient mathematical modelling and electromagnetic field equations templates for cylindrical electrical machines, improved and remade Cartesian product and genetic optimization algorithms. This allows to develop electrical machines classifications models, included not only structure development but also parallel synthesis of mathematical models and design software, to improve electric machines efficiency and technical performance. Originality. For the first time, we have applied a new way of design and modelling of electrical machines, which is based on the basic concepts of the object-oriented analysis. For the first time is suggested to use a single class template for structural and system organization of electrical machines, invariant to their specific variety. Practical value. We have manufactured screw dryer for coil dust drying and mixing based on the performed object-oriented theory. We have developed object-oriented software for design and optimization of induction motor with squirrel cage rotor of AIR series and brushless turbo-generator exciter. The experimental studies have confirmed the adequacy of the developed object-oriented design methodology.

Principles of object-oriented modeling and simulation with Modelica 2.1

CERN Document Server

Fritzson, Peter

2004-01-01

A timely introduction to the latest modeling and simulation techniques. Object-oriented modeling is a fast-growing area of modeling and simulation that provides a structured, computer-supported way of doing mathematical and equation-based modeling. Modelica is today's most promising modeling language in that it effectively unifies and generalizes previous object-oriented modeling languages and provides a sound basis for the basic concepts. Principles of Object-Oriented Modeling and Simulation with Modelica 2.1 introduces the latest methods of object-oriented component-based system modeling and

Object-oriented biomedical system modelling--the language.

Science.gov (United States)

Hakman, M; Groth, T

1999-11-01

The paper describes a new object-oriented biomedical continuous system modelling language (OOBSML). It is fully object-oriented and supports model inheritance, encapsulation, and model component instantiation and behaviour polymorphism. Besides the traditional differential and algebraic equation expressions the language includes also formal expressions for documenting models and defining model quantity types and quantity units. It supports explicit definition of model input-, output- and state quantities, model components and component connections. The OOBSML model compiler produces self-contained, independent, executable model components that can be instantiated and used within other OOBSML models and/or stored within model and model component libraries. In this way complex models can be structured as multilevel, multi-component model hierarchies. Technically the model components produced by the OOBSML compiler are executable computer code objects based on distributed object and object request broker technology. This paper includes both the language tutorial and the formal language syntax and semantic description.

A Programming Environment Evaluation Methodology for Object-Oriented Systems. Ph.D Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1987-01-01

The object-oriented design strategy as both a problem decomposition and system development paradigm has made impressive inroads into the various areas of the computing sciences. Substantial development productivity improvements have been demonstrated in areas ranging from artificial intelligence to user interface design. However, there has been very little progress in the formal characterization of these productivity improvements and in the identification of the underlying cognitive mechanisms. The development and validation of models and metrics of this sort require large amounts of systematically-gathered structural and productivity data. There has, however, been a notable lack of systematically-gathered information on these development environments. A large part of this problem is attributable to the lack of a systematic programming environment evaluation methodology that is appropriate to the evaluation of object-oriented systems.

Object-Oriented Programming in the Beta Programming Language

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger; Nygaard, Kristen

This is a book on object-oriented programming and the BETA programming language. Object-oriented programming originated with the Simula languages developed at the Norwegian Computing Center, Oslo, in the 1960s. The first Simula language, Simula I, was intended for writing simulation programs....... Simula I was later used as a basis for defining a general purpose programming language, Simula 67. In addition to being a programming language, Simula1 was also designed as a language for describing and communicating about systems in general. Simula has been used by a relatively small community for many...... years, although it has had a major impact on research in computer science. The real breakthrough for object-oriented programming came with the development of Smalltalk. Since then, a large number of programming languages based on Simula concepts have appeared. C++ is the language that has had...

Integration of the Gene Ontology into an object-oriented architecture

Directory of Open Access Journals (Sweden)

Zheng W Jim

2005-05-01

Full Text Available Abstract Background To standardize gene product descriptions, a formal vocabulary defined as the Gene Ontology (GO has been developed. GO terms have been categorized into biological processes, molecular functions, and cellular components. However, there is no single representation that integrates all the terms into one cohesive model. Furthermore, GO definitions have little information explaining the underlying architecture that forms these terms, such as the dynamic and static events occurring in a process. In contrast, object-oriented models have been developed to show dynamic and static events. A portion of the TGF-beta signaling pathway, which is involved in numerous cellular events including cancer, differentiation and development, was used to demonstrate the feasibility of integrating the Gene Ontology into an object-oriented model. Results Using object-oriented models we have captured the static and dynamic events that occur during a representative GO process, "transforming growth factor-beta (TGF-beta receptor complex assembly" (GO:0007181. Conclusion We demonstrate that the utility of GO terms can be enhanced by object-oriented technology, and that the GO terms can be integrated into an object-oriented model by serving as a basis for the generation of object functions and attributes.

Mastering object-oriented Python

CERN Document Server

Lott, Steven F

2014-01-01

This book follows a standard tutorial approach with approximately 750 code samples spread through the 19 chapters. This amounts to over 5,900 lines of code that illustrate each concept.This book is aimed at programmers who have already learned the basics of object-oriented Python and need to write more sophisticated, flexible code that integrates seamlessly with the rest of Python. This book assumes a computer science background, with experience of common Python design patterns.

Teaching Object-Oriented Programming is more than teaching Object-Oriented Programming Languages

DEFF Research Database (Denmark)

Knudsen, Jørgen Lindskov; Madsen, Ole Lehrmann

1988-01-01

the research area gives additional insight into the research area and its underlying theoretical foundation. In this paper we will report on our approach to teaching programming languages as a whole and especially teaching object-oriented programming. The prime message to be told is that working from...... a theoretical foundation pays off. Without a theoretical foundation, the discussions are often centered around features of different languages. With a foundation, discussions may be conducted on solid pound. Furthermore, the students have significantly fewer difficulties in grasping the concrete programming...

Testing Object-Oriented Software

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Madsen, Ole Lehrmann; Skov, Stefan H.

The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto-types that......The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto......-types that are currently being developed into production versions. To assure a high quality in the product it was decided to carry out an activ-ity regarding issues in testing OO software. The purpose of this report is to discuss the issues of testing object-oriented software. It is often claimed that testing of OO...... software is radically different form testing traditional software developed using imperative/procedural programming. Other authors claim that there is no difference. In this report we will attempt to give an answer to these questions (or at least initiate a discussion)....

Etomica: an object-oriented framework for molecular simulation.

Science.gov (United States)

Schultz, Andrew J; Kofke, David A

2015-03-30

We describe the design of an object-oriented library of software components that are suitable for constructing simulations of systems of interacting particles. The emphasis of the discussion is on the general design of the components and how they interact, and less on details of the programming interface or its implementation. Example code is provided as an aid to understanding object-oriented programming structures and to demonstrate how the framework is applied. © 2015 Wiley Periodicals, Inc.

Object-oriented design and programming in medical decision support.

Science.gov (United States)

Heathfield, H; Armstrong, J; Kirkham, N

1991-12-01

The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

Object-oriented analysis and design

CERN Document Server

Deacon, John

2005-01-01

John Deacon’s in-depth, highly pragmatic approach to object-oriented analysis and design, demonstrates how to lay the foundations for developing the best possible software. Students will learn how to ensure that analysis and design remain focused and productive. By working through the book, they will gain a solid working knowledge of best practices in software development.

The GENIE Universal, Object-Oriented Neutrino Generator

International Nuclear Information System (INIS)

Andreopoulos, C.

2006-01-01

A Universal Object-Oriented/C++ Neutrino Monte Carlo Generator (GENIE) is briefly described. The purpose of this large scale software system is to become the 'canonical' Monte Carlo for Neutrino Interaction Physics whose validity will extend to all neutrino types and nuclear targets in the energy range from few MeV to few hundred GeV. GENIE attempts to unify the Monte Carlo generation approaches used by a host of different, smaller procedural systems in a modern object-oriented software design. It is already a mature software system that currently consists of ∼100,000 lines of C++ code (∼350 classes organised in ∼40 packages)

Aspect-Oriented Programming Using Composition Filters, in Object-Oriented Technology

NARCIS (Netherlands)

Aksit, Mehmet; Demeyer, S.; Bosch, H.G.P.; Tekinerdogan, B.

Software engineers may experience problems in modeling certain aspects while applying object-oriented techniques [4, 10, 11]. Composition-Filters are capable of expressing various different kinds of aspects in a uniform manner. These aspects are, for example, inheritance and delegation [1] and

Learning Object-Orientation through ICT-mediated Apprenticeship

DEFF Research Database (Denmark)

Fjuk, A.; Berge, O.; Bennedsen, J.

2004-01-01

In this paper, we show how sociocultural theories inform the design of a course in object-oriented programming. An essential learning objective within this philosophy is the programming processes as such. To move toward this learning goal, the course design incorporates a combination of the so...

Object-oriented accelerator design with HPF

International Nuclear Information System (INIS)

Ji Qiang; Ryne, R.D.; Habib, S.

1998-01-01

In this paper, object-oriented design is applied to codes for beam dynamics simulations in accelerators using High Performance Fortran (HPF). This results in good maintainability, reusability, and extensibility of software, combined with the ease of parallel programming provided by HPF

Strategic Directions in Object-Oriented Programming

NARCIS (Netherlands)

Aksit, Mehmet; Guerroui, Rachid

1996-01-01

This paper has provided an overview of the field of object-oriented programming. After presenting a historical perspective and some major achievements in the field, four research directions were introduced: technologies integration, software components, distributed programming, and new paradigms. In

Object-oriented accelerator design with HPF

Energy Technology Data Exchange (ETDEWEB)

Ji Qiang; Ryne, R.D.; Habib, S.

1998-12-31

In this paper, object-oriented design is applied to codes for beam dynamics simulations in accelerators using High Performance Fortran (HPF). This results in good maintainability, reusability, and extensibility of software, combined with the ease of parallel programming provided by HPF.

Object-oriented simulation for the Superconducting Super Collider

International Nuclear Information System (INIS)

Zhou, Jiasheng; Chung, Moon-Jung

1992-10-01

This paper describes the design and implementation of an object-oriented simulation environment called OZ for the Superconducting Super Collider (SSC). The design applies object-oriented technology to data visualization, behavior modelling, dynamic simulation and version control. A meta class structure is proposed to model different types of objects in large systems by their functionality. OZ provides a direct-manipulation user interface which allows the user to visualize the data as an object in the database and interactively model the component of the system. Modelling can be exercised at different levels of the class hierarchy and then can be dynamically bound into a system for simulation. Inheritance is used to derive new configurations of the system or subsystem from the existing one, and specify an object's behavior. Delegation is used to construct a system by instantiating existing objects and ''stealing'' their methods by delegators

A survey of object oriented languages in programming environments

OpenAIRE

Haakonsen, Harald

1987-01-01

Approved for public release; distribution is unlimited This thesis addresses object oriented programming languages; and a restrictive definition of object oriented programming languages is presented and defended. Differences between programming languages are discussed and related to interactive integrated programming environments. Topics related to user friendly interface to the computer system and modem programming practice are discussed. The thesis especially addresses features in ...

A Framework-Based Environment for Object-Oriented Scientific Codes

Directory of Open Access Journals (Sweden)

Robert A. Ballance

1993-01-01

Full Text Available Frameworks are reusable object-oriented designs for domain-specific programs. In our estimation, frameworks are the key to productivity and reuse. However, frameworks require increased support from the programming environment. A framework-based environment must include design aides and project browsers that can mediate between the user and the framework. A framework-based approach also places new requirements on conventional tools such as compilers. This article explores the impact of object-oriented frameworks upon a programming environment, in the context of object-oriented finite element and finite difference codes. The role of tools such as design aides and project browsers is discussed, and the impact of a framework-based approach upon compilers is examined. Examples are drawn from our prototype C++ based environment.

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel; Tekinerdogan, B.; van den Broek, P.M.; Saeki, M.; Hruby, P.; Sunye, G.

2001-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

Automating Object-Oriented Software Development Methods

NARCIS (Netherlands)

Tekinerdogan, B.; Frohner, A´ kos; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel

2002-01-01

Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

Virtual classes: a powerful mechanism in object-oriented programming

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger

1989-01-01

The notions of class, subclass and virtual procedure are fairly well understood and recognized as some of the key concepts in object-oriented programming. The possibility of modifying a virtual procedure in a subclass is a powerful technique for specializing the general properties of the superclass....... In most object-oriented languages, the attributes of an object may be references to objects and (virtual) procedures. In Simula and BETA it is also possible to have class attributes. The power of class attributes has not yet been widely recognized. In BETA a class may also have virtual class attributes...

Attention to memory: orienting attention to sound object representations.

Science.gov (United States)

Backer, Kristina C; Alain, Claude

2014-01-01

Despite a growing acceptance that attention and memory interact, and that attention can be focused on an active internal mental representation (i.e., reflective attention), there has been a paucity of work focusing on reflective attention to 'sound objects' (i.e., mental representations of actual sound sources in the environment). Further research on the dynamic interactions between auditory attention and memory, as well as its degree of neuroplasticity, is important for understanding how sound objects are represented, maintained, and accessed in the brain. This knowledge can then guide the development of training programs to help individuals with attention and memory problems. This review article focuses on attention to memory with an emphasis on behavioral and neuroimaging studies that have begun to explore the mechanisms that mediate reflective attentional orienting in vision and more recently, in audition. Reflective attention refers to situations in which attention is oriented toward internal representations rather than focused on external stimuli. We propose four general principles underlying attention to short-term memory. Furthermore, we suggest that mechanisms involved in orienting attention to visual object representations may also apply for orienting attention to sound object representations.

Clinical Views: Object-Oriented Views for Clinical Databases

Science.gov (United States)

Portoni, Luisa; Combi, Carlo; Pinciroli, Francesco

1998-01-01

We present here a prototype of a clinical information system for the archiving and the management of multimedia and temporally-oriented clinical data related to PTCA patients. The system is based on an object-oriented DBMS and supports multiple views and view schemas on patients' data. Remote data access is supported too.

Integration of object-oriented knowledge representation with the CLIPS rule based system

Science.gov (United States)

Logie, David S.; Kamil, Hasan

1990-01-01

The paper describes a portion of the work aimed at developing an integrated, knowledge based environment for the development of engineering-oriented applications. An Object Representation Language (ORL) was implemented in C++ which is used to build and modify an object-oriented knowledge base. The ORL was designed in such a way so as to be easily integrated with other representation schemes that could effectively reason with the object base. Specifically, the integration of the ORL with the rule based system C Language Production Systems (CLIPS), developed at the NASA Johnson Space Center, will be discussed. The object-oriented knowledge representation provides a natural means of representing problem data as a collection of related objects. Objects are comprised of descriptive properties and interrelationships. The object-oriented model promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects. Data is inherited through an object network via the relationship links. Together, the two schemes complement each other in that the object-oriented approach efficiently handles problem data while the rule based knowledge is used to simulate the reasoning process. Alone, the object based knowledge is little more than an object-oriented data storage scheme; however, the CLIPS inference engine adds the mechanism to directly and automatically reason with that knowledge. In this hybrid scheme, the expert system dynamically queries for data and can modify the object base with complete access to all the functionality of the ORL from rules.

The Study of Object-Oriented Motor Imagery Based on EEG Suppression.

Directory of Open Access Journals (Sweden)

Lili Li

Full Text Available Motor imagery is a conventional method for brain computer interface and motor learning. To avoid the great individual difference of the motor imagery ability, object-oriented motor imagery was applied, and the effects were studied. Kinesthetic motor imagery and visual observation were administered to 15 healthy volunteers. The EEG during cue-based simple imagery (SI, object-oriented motor imagery (OI, non-object-oriented motor imagery (NI and visual observation (VO was recorded. Study results showed that OI and NI presented significant contralateral suppression in mu rhythm (p 0.05. Compared with NI, OI showed significant difference (p < 0.05 in mu rhythm and weak significant difference (p = 0.0612 in beta rhythm over the contralateral hemisphere. The ability of motor imagery can be reflected by the suppression degree of mu and beta frequencies which are the motor related rhythms. Thus, greater enhancement of activation in mirror neuron system is involved in response to object-oriented motor imagery. The object-oriented motor imagery is favorable for improvement of motor imagery ability.

Aguide to Matlab object-oriented programming

CERN Document Server

Register, Andy H

2007-01-01

This is the first book to deliver broad coverage of the documented and undocumented object-oriented features of MATLAB®. Unlike the typical approach of other resources, this guide explains why each feature is important, demonstrates how each feature is used, and promotes an understanding of the interactions between features.

A Semantics of Object-Oriented Sets

NARCIS (Netherlands)

Balsters, H.; de Vreeze, C.C.; de Vreeze, C.C.

An account is given of extending the well-known object-oriented type system of Luca Cardelli with set constructs and logical formalism. The system is based on typed &lgr;-notation, employing a subtyping relation and a powertype construct. Sets in this system are value expressions and are typed as

Static Typing for Object-Oriented Programming

DEFF Research Database (Denmark)

Schwartzbach, Michael Ignatieff; Palsberg, Jens

1994-01-01

We develop a theory of statically typed object-oriented languages. It represents classes as labeled, regular trees, types as finit sets of classes , and sub-classing as a partial order on trees. We show that our sub-classing order strictly generalizes inheritance, and that a novel genericity mech...

A case of complex regional pain syndrome with agnosia for object orientation.

Science.gov (United States)

Robinson, Gail; Cohen, Helen; Goebel, Andreas

2011-07-01

This systematic investigation of the neurocognitive correlates of complex regional pain syndrome (CRPS) in a single case also reports agnosia for object orientation in the context of persistent CRPS. We report a patient (JW) with severe long-standing CRPS who had no difficulty identifying and naming line drawings of objects presented in 1 of 4 cardinal orientations. In contrast, he was extremely poor at reorienting these objects into the correct upright orientation and in judging whether an object was upright or not. Moreover, JW made orientation errors when copying drawings of objects, and he also showed features of mirror reversal in writing single words and reading single letters. The findings are discussed in relation to accounts of visual processing. Agnosia for object orientation is the term for impaired knowledge of an object's orientation despite good recognition and naming of the same misoriented object. This defect has previously only been reported in patients with major structural brain lesions. The neuroanatomical correlates are discussed. The patient had no structural brain lesion, raising the possibility that nonstructural reorganisation of cortical networks may be responsible for his deficits. Other patients with CRPS may have related neurocognitive defects. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

Typed Sets as a Basis for Object-Oriented Database Schemas

NARCIS (Netherlands)

Balsters, H.; de By, R.A.; Zicari, R.

The object-oriented data model TM is a language that is based on the formal theory of FM, a typed language with object-oriented features such as attributes and methods in the presence of subtyping. The general (typed) set constructs of FM allow one to deal with (database) constraints in TM. The

An object oriented framework of EPICS for MicroTCA based control system

International Nuclear Information System (INIS)

Geng, Z.

2012-01-01

EPICS (Experimental Physics and Industrial Control System) is a distributed control system platform which has been widely used for large scientific devices control like particle accelerators and fusion plant. EPICS has introduced object oriented (C ++ ) interfaces to most of the core services. But the major part of EPICS, the run-time database, only provides C interfaces, which is hard to involve the EPICS record concerned data and routines in the object oriented architecture of the software. This paper presents an object oriented framework which contains some abstract classes to encapsulate the EPICS record concerned data and routines in C ++ classes so that full OOA (Objected Oriented Analysis) and OOD (Object Oriented Design) methodologies can be used for EPICS IOC design. We also present a dynamic device management scheme for the hot swap capability of the MicroTCA based control system. (authors)

Object Oriented Modelling and Dynamical Simulation

DEFF Research Database (Denmark)

Wagner, Falko Jens; Poulsen, Mikael Zebbelin

1998-01-01

This report with appendix describes the work done in master project at DTU.The goal of the project was to develop a concept for simulation of dynamical systems based on object oriented methods.The result was a library of C++-classes, for use when both building componentbased models and when...

Java Test Driver Generation from Object-Oriented Interaction Traces

NARCIS (Netherlands)

M.M. Bonsangue (Marcello); F.S. de Boer (Frank); A. Gruener; M. Steffen

2009-01-01

htmlabstractIn the context of test-driven development for object-oriented programs, mock objects are increasingly used for unit testing. Several Java mock object frameworks exist, which all have in common that mock objects, realizing the test environment, are directly specied at the Java program

Software bug prediction using object-oriented metrics

Indian Academy of Sciences (India)

Dharmendra Lal Gupta

2 Department of Computer Science and Engineering, Mewar University, Chittorgarh 312901, India e-mail: ... the object-oriented technology has been widely accepted ... whereas project metrics cover the number of staff members involved in ...

Object-oriented designs for LHD data acquisitions using client-server model

International Nuclear Information System (INIS)

Kojima, M.; Nakanishi, H.; Hidekuma, S.

1999-01-01

The LHD data acquisition system handles >600 MB data per shot. The fully distributed data processing and the object-oriented system design are the main principles of this system. Its wide flexibility has been realized by introducing the object-oriented method into the data processing, in which the object sharing and class libraries will provide the unified way of data handling for the network client-server programming. The object class libraries are described in C++, and the network object sharing is provided through the commercial software named HARNESS. As for the CAMAC setup, the Java script can use the C++ class libraries and thus establishes the relationship between the object-oriented database and the WWW server. In LHD experiments, the CAMAC system and the Windows NT operating system are applied for digitizing and acquiring data, respectively. For the purpose of the LHD data acquisition, the new CAMAC handling software on Windows NT have been developed to manipulate the SCSI-connected crate controllers. The CAMAC command lists and diagnostic data classes are shared between client and server computers. A lump of the diagnostic data can be treated as part of an object by the object-oriented programming. (orig.)

Object-Oriented Analysis of Satellite Images Using Artificial Neural Networks for Post-Earthquake Buildings Change Detection

Science.gov (United States)

Khodaverdi zahraee, N.; Rastiveis, H.

2017-09-01

Earthquake is one of the most divesting natural events that threaten human life during history. After the earthquake, having information about the damaged area, the amount and type of damage can be a great help in the relief and reconstruction for disaster managers. It is very important that these measures should be taken immediately after the earthquake because any negligence could be more criminal losses. The purpose of this paper is to propose and implement an automatic approach for mapping destructed buildings after an earthquake using pre- and post-event high resolution satellite images. In the proposed method after preprocessing, segmentation of both images is performed using multi-resolution segmentation technique. Then, the segmentation results are intersected with ArcGIS to obtain equal image objects on both images. After that, appropriate textural features, which make a better difference between changed or unchanged areas, are calculated for all the image objects. Finally, subtracting the extracted textural features from pre- and post-event images, obtained values are applied as an input feature vector in an artificial neural network for classifying the area into two classes of changed and unchanged areas. The proposed method was evaluated using WorldView2 satellite images, acquired before and after the 2010 Haiti earthquake. The reported overall accuracy of 93% proved the ability of the proposed method for post-earthquake buildings change detection.

Field on Poincare group and quantum description of orientable objects

Energy Technology Data Exchange (ETDEWEB)

Gitman, D.M. [Universidade de Sao Paulo, Instituto de Fisica, Caixa Postal 66318-CEP, Sao Paulo, S.P. (Brazil); Shelepin, A.L. [Moscow Institute of Radio Engineering, Electronics and Automation, Moscow (Russian Federation)

2009-05-15

We propose an approach to the quantum-mechanical description of relativistic orientable objects. It generalizes Wigner's ideas concerning the treatment of nonrelativistic orientable objects (in particular, a nonrelativistic rotator) with the help of two reference frames (space-fixed and body-fixed). A technical realization of this generalization (for instance, in 3+1 dimensions) amounts to introducing wave functions that depend on elements of the Poincare group G. A complete set of transformations that test the symmetries of an orientable object and of the embedding space belongs to the group {pi}=G x G. All such transformations can be studied by considering a generalized regular representation of G in the space of scalar functions on the group, f(x,z), that depend on the Minkowski space points x element of G/Spin(3,1) as well as on the orientation variables given by the elements z of a matrix Z element of Spin(3,1). In particular, the field f(x,z) is a generating function of the usual spin-tensor multi-component fields. In the theory under consideration, there are four different types of spinors, and an orientable object is characterized by ten quantum numbers. We study the corresponding relativistic wave equations and their symmetry properties. (orig.)

Managing the BABAR Object Oriented Database

International Nuclear Information System (INIS)

Hasan, Adil

2002-01-01

The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. We discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

Mapping and Visiting in Functional and Object-oriented Programming

DEFF Research Database (Denmark)

Nørmark, Kurt; Thomsen, Bent; Thomsen, Lone Leth

2008-01-01

Mapping and visiting represent different programming styles for traversals of collections of data.  Mapping is rooted in the functional programming paradigm, and visiting is rooted in the object-oriented programming paradigm.  This paper explores the similarities and differences between mapping...... and visiting, seen across the traditions in the two different programming paradigms. The paper is concluded with recommendations for mapping and visiting in programming languages that support both the functional and the object-oriented paradigms....

Combining Landform Thematic Layer and Object-Oriented Image Analysis to Map the Surface Features of Mountainous Flood Plain Areas

Science.gov (United States)

Chuang, H.-K.; Lin, M.-L.; Huang, W.-C.

2012-04-01

The Typhoon Morakot on August 2009 brought more than 2,000 mm of cumulative rainfall in southern Taiwan, the extreme rainfall event caused serious damage to the Kaoping River basin. The losses were mostly blamed on the landslides along sides of the river, and shifting of the watercourse even led to the failure of roads and bridges, as well as flooding and levees damage happened around the villages on flood bank and terraces. Alluvial fans resulted from debris flow of stream feeders blocked the main watercourse and debris dam was even formed and collapsed. These disasters have highlighted the importance of identification and map the watercourse alteration, surface features of flood plain area and artificial structures soon after the catastrophic typhoon event for natural hazard mitigation. Interpretation of remote sensing images is an efficient approach to acquire spatial information for vast areas, therefore making it suitable for the differentiation of terrain and objects near the vast flood plain areas in a short term. The object-oriented image analysis program (Definiens Developer 7.0) and multi-band high resolution satellite images (QuickBird, DigitalGlobe) was utilized to interpret the flood plain features from Liouguei to Baolai of the the Kaoping River basin after Typhoon Morakot. Object-oriented image interpretation is the process of using homogenized image blocks as elements instead of pixels for different shapes, textures and the mutual relationships of adjacent elements, as well as categorized conditions and rules for semi-artificial interpretation of surface features. Digital terrain models (DTM) are also employed along with the above process to produce layers with specific "landform thematic layers". These layers are especially helpful in differentiating some confusing categories in the spectrum analysis with improved accuracy, such as landslides and riverbeds, as well as terraces, riverbanks, which are of significant engineering importance in disaster

Orienting Attention to Sound Object Representations Attenuates Change Deafness

Science.gov (United States)

Backer, Kristina C.; Alain, Claude

2012-01-01

According to the object-based account of attention, multiple objects coexist in short-term memory (STM), and we can selectively attend to a particular object of interest. Although there is evidence that attention can be directed to visual object representations, the assumption that attention can be oriented to sound object representations has yet…

Query Processing and Interlinking of Fuzzy Object-Oriented Database

OpenAIRE

Shweta Dwivedi; Santosh Kumar

2017-01-01

Due to the many limitation and poor data handling in the existing relational database, the software professional and researchers moves towards the object-oriented database which has much better capability to handling the real and complex real world data i.e. clear and crisp data and also have the capability to perform some huge and complex queries in an effective manner. On the other hand, a new approach in database is introduced named as Fuzzy Object-Oriented Database (FOOD); it has all the ...

Interaction of orientable object fields with gauge fields

International Nuclear Information System (INIS)

Gitman, D M; Shelepin, A L

2011-01-01

We consider a scalar field f(g) on the Poincaré group M(3, 1). This scalar field describes objects that are characterized by a position x and an orientation z, g=(x,z). The field f(x, z) admits two kinds of transformations, corresponding to a change of the space-fixed reference frame, as well as to a change of the body-fixed reference frame, which form the group M(3, 1) ext ×M(3, 1) int , and also phase transformations U(1) ch of orientational variables z. Elementary particles considered as elementary orientable objects are described by the scalar functions transforming according to irreps of the group M(3, 1) ext ×M(3, 1) int ×U(1) ch . Correspondingly, their continuous symmetries can be divided into external, which form the Poincaré group M(3, 1) ext , and internal M(3, 1) int ×U(1) ch . The assumption that the internal symmetries in the theory of orientable objects are gauge ones allows one to obtain important features of the known fundamental interactions—the electroweak and the gravitational. Localization of the group of the right translations T(4) int leads to the teleparallel theory of gravity, which is equivalent to general relativity. Localization of the compact subgroup SU(2) int ×U(1) ch leads to the theory of electroweak interactions. Thus, the suggested approach can be considered as a possible way to gravitational-electroweak unification.

Considerations of persistence and security in CHOICES, an object-oriented operating system

Science.gov (United States)

Campbell, Roy H.; Madany, Peter W.

1990-01-01

The current design of the CHOICES persistent object implementation is summarized, and research in progress is outlined. CHOICES is implemented as an object-oriented system, and persistent objects appear to simplify and unify many functions of the system. It is demonstrated that persistent data can be accessed through an object-oriented file system model as efficiently as by an existing optimized commercial file system. The object-oriented file system can be specialized to provide an object store for persistent objects. The problems that arise in building an efficient persistent object scheme in a 32-bit virtual address space that only uses paging are described. Despite its limitations, the solution presented allows quite large numbers of objects to be active simultaneously, and permits sharing and efficient method calls.

Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

Science.gov (United States)

Wells, I G; Cartwright, R Y; Farnan, L P

1993-12-15

The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

Sexual Orientation, Objective Height, and Self-Reported Height.

Science.gov (United States)

Skorska, Malvina N; Bogaert, Anthony F

2017-01-01

Studies that have used mostly self-reported height have found that androphilic men and women are shorter than gynephilic men and women, respectively. This study examined whether an objective height difference exists or whether a psychosocial account (e.g., distortion of self-reports) may explain these putative height differences. A total of 863 participants, recruited at a Canadian university, the surrounding region, and through lesbian, gay, bisexual, and transgender (LGBT) events across Canada, self-reported their height and had their height measured. Androphilic men were shorter, on average, than gynephilic men. There was no objective height difference between gynephilic, ambiphilic, and androphilic women. Self-reported height, statistically controlling for objective height, was not related to sexual orientation. These findings are the first to show an objective height difference between androphilic and gynephilic men. Also, the findings suggest that previous studies using self-reported height found part of a true objective height difference between androphilic and gynephilic men. These findings have implications for existing biological theories of men's sexual orientation development.

An intelligent dynamic simulation environment: An object-oriented approach

International Nuclear Information System (INIS)

Robinson, J.T.; Kisner, R.A.

1988-01-01

This paper presents a prototype simulation environment for nuclear power plants which illustrates the application of object-oriented programming to process simulation. Systems are modeled using this technique as a collection of objects which communicate via message passing. The environment allows users to build simulation models by selecting iconic representations of plant components from a menu and connecting them with the aid of a mouse. Models can be modified graphically at any time, even as the simulation is running, and the results observed immediately via real-time graphics. This prototype illustrates the use of object-oriented programming to create a highly interactive and automated simulation environment. 9 refs., 4 figs

Direct evaluation of fault trees using object-oriented programming techniques

Science.gov (United States)

Patterson-Hine, F. A.; Koen, B. V.

1989-01-01

Object-oriented programming techniques are used in an algorithm for the direct evaluation of fault trees. The algorithm combines a simple bottom-up procedure for trees without repeated events with a top-down recursive procedure for trees with repeated events. The object-oriented approach results in a dynamic modularization of the tree at each step in the reduction process. The algorithm reduces the number of recursive calls required to solve trees with repeated events and calculates intermediate results as well as the solution of the top event. The intermediate results can be reused if part of the tree is modified. An example is presented in which the results of the algorithm implemented with conventional techniques are compared to those of the object-oriented approach.

Mobile Game Development: Object-Orientation or Not

DEFF Research Database (Denmark)

Zhang, Weishan; Han, Dong; Kunz, Thomas

2007-01-01

technology is the prevalent programming paradigm, most of the current mobile games are developed with object-orientation (OO) technologies. Intuitively OO is not a perfect paradigm for embedded software. Questions remain such as how OO and to what degree OO will affect the performance, executable file size......Mobile games are one of the primary entertainment applications at present. Limited by scarce resources, such as memory, CPU, input and output, etc, mobile game development is more difficult than desktop application development, with performance as one of the top critical requirements. As object-oriented...... for the development of mobile device applications (but normal for usual desktop applications). We then apply some optimization strategies along the way of structural programming. The experiment shows that the total jar file size of these five optimized games decreases 71%, the lines of codes decreases 59...

Object-oriented design for LHD data acquisition using client-server model

International Nuclear Information System (INIS)

Kojima, M.; Nakanishi, H.; Hidekuma, S.

1997-11-01

The LHD data acquisition system handles a huge amount of data exceeding over 600MB per shot. The fully distributed processing and the object-oriented system design are the main principles of this system. Its wide flexibility has been realized by introducing the object-oriented method into the data processing, in which the object-sharing and the class libraries will provide the unified way of data handling for both servers and clients program developments. The object class libraries are written in C ++ , and the network object-sharing is provided through a commercial software called HARNESS. As for the CAMAC setup, the Java script can use the C ++ class libraries and thus establishes the relationship between the object-oriented database and the WWW server. In LHD experiments, the CAMAC system and the Windows NT operating system are applied for digitizing and acquiring data, respectively. For the purpose of the LHD data acquisition, the new CAMAC handling softwares which work on Windows NT have been developed to manipulate the SCSI-connected crate controllers. The CAMAC command lists and diagnostic data classes are shared between clients and servers. A lump of diagnostic data mass is treated as a part of an object by the object-oriented programming. (author)

What object-oriented programming may be - and what it does not have to be

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Møller-Pedersen, Birger

1988-01-01

A conceptual framework for object-oriented programming is presented. The framework is independent of specific programming language constructs. It is illustrated how this framework is reflected in an object-oriented language and the language mechanisms are compared with the corresponding elements...... of other object-oriented languages. Main issues of object-oriented programming are considered on the basis of the framework presented here....

The Use of Object-Oriented Analysis Methods in Surety Analysis

Energy Technology Data Exchange (ETDEWEB)

Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

1999-05-01

Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automatic model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.

Ferromanganese Furnace Modelling Using Object-Oriented Principles

Energy Technology Data Exchange (ETDEWEB)

Wasboe, S.O.

1996-12-31

This doctoral thesis defines an object-oriented framework for aiding unit process modelling and applies it to model high-carbon ferromanganese furnaces. A framework is proposed for aiding modelling of the internal topology and the phenomena taking place inside unit processes. Complex unit processes may consist of a number of zones where different phenomena take place. A topology is therefore defined for the unit process itself, which shows the relations between the zones. Inside each zone there is a set of chemical species and phenomena, such as reactions, phase transitions, heat transfer etc. A formalized graphical methodology is developed as a tool for modelling these zones and their interaction. The symbols defined in the graphical framework are associated with objects and classes. The rules for linking the objects are described using OMT (Object Modeling Technique) diagrams and formal language formulations. The basic classes that are defined are implemented using the C++ programming language. The ferromanganese process is a complex unit process. A general description of the process equipment is given, and a detailed discussion of the process itself and a system theoretical overview of it. The object-oriented framework is then used to develop a dynamic model based on mass and energy balances. The model is validated by measurements from an industrial furnace. 101 refs., 119 figs., 20 tabs.

Component Composability Issues in Object-Oriented Programming

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1997-01-01

Building software from reusable components is considered important in reducing development costs. Object-oriented languages such as C++, Smalltalk and Java, however, are not capable of expressing certain aspects of applications in a composable way. Software engineers may experience difficulties in

Objects as closures: Abstract semantics of object oriented languages

Science.gov (United States)

Reddy, Uday S.

1989-01-01

We discuss denotational semantics of object-oriented languages, using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin, in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

Objects as closures - Abstract semantics of object oriented languages

Science.gov (United States)

Reddy, Uday S.

1988-01-01

The denotational semantics of object-oriented languages is discussed using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin (1988), in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

Object-oriented Matlab adaptive optics toolbox

Science.gov (United States)

Conan, R.; Correia, C.

2014-08-01

Object-Oriented Matlab Adaptive Optics (OOMAO) is a Matlab toolbox dedicated to Adaptive Optics (AO) systems. OOMAO is based on a small set of classes representing the source, atmosphere, telescope, wavefront sensor, Deformable Mirror (DM) and an imager of an AO system. This simple set of classes allows simulating Natural Guide Star (NGS) and Laser Guide Star (LGS) Single Conjugate AO (SCAO) and tomography AO systems on telescopes up to the size of the Extremely Large Telescopes (ELT). The discrete phase screens that make the atmosphere model can be of infinite size, useful for modeling system performance on large time scales. OOMAO comes with its own parametric influence function model to emulate different types of DMs. The cone effect, altitude thickness and intensity profile of LGSs are also reproduced. Both modal and zonal modeling approach are implemented. OOMAO has also an extensive library of theoretical expressions to evaluate the statistical properties of turbulence wavefronts. The main design characteristics of the OOMAO toolbox are object-oriented modularity, vectorized code and transparent parallel computing. OOMAO has been used to simulate and to design the Multi-Object AO prototype Raven at the Subaru telescope and the Laser Tomography AO system of the Giant Magellan Telescope. In this paper, a Laser Tomography AO system on an ELT is simulated with OOMAO. In the first part, we set-up the class parameters and we link the instantiated objects to create the source optical path. Then we build the tomographic reconstructor and write the script for the pseudo-open-loop controller.

Incremental Interactive Verification of the Correctness of Object-Oriented Software

DEFF Research Database (Denmark)

Mehnert, Hannes

Development of correct object-oriented software is difficult, in particular if a formalised proof of its correctness is demanded. A lot of current software is developed using the object-oriented programming paradigm. This paradigm compensated for safety and security issues with imperative...... structure. For efficiency, our implementation uses copy-on-write and shared mutable data, not observable by a client. I further use this data structure to verify the correctness of a solution to the point location problem. The results demonstrate that I am able to verify the correctness of object-oriented...... programming, such as manual memory management. Popularly used integrated development environments (IDEs) provide features such as debugging and unit testing to facilitate development of robust software, but hardly any development environment supports the development of provable correct software. A tight...

Object-Oriented Scientific Programming with Fortran 90

Science.gov (United States)

Norton, C.

1998-01-01

Fortran 90 is a modern language that introduces many important new features beneficial for scientific programming. We discuss our experiences in plasma particle simulation and unstructured adaptive mesh refinement on supercomputers, illustrating the features of Fortran 90 that support the object-oriented methodology.

Status of the object-oriented EGS interface project

International Nuclear Information System (INIS)

Yacout, A.M.; Dunn, W.L.; Nelson, W.R.; Lui, P.; Bielajew, A.F.; Hirayama, H.; Namito, Y.

2000-01-01

The object-oriented EGS interface project seeks to simplify - using modern object-oriented and visual user interface techniques - the geometry and scoring aspects of the process of running the EGS code. The project will create an extremely user-friendly EGS package that retains and exploits the well documented physics advantages of EGS but removes the requirement that the user write HOWFAR and AUSGAB subroutines to define the geometry and scoring aspects of each new problem. In addition, several physics enhancements will be incorporated in EGS5. Although EGS5 will be able to be used in the traditional way - in a stand-alone fashion with users writing their own geometry and scoring subroutines - it is designed to be used in a completely new way - linked to a user interface through which users can manage all aspects of problem specification and code operation. This paper concentrates on the object-oriented user interface, which will dramatically simplify defining problem-specific detail for EGS. The 'EGS5 + VUI1' package will allow users to solve independent problems by run-time linking of the EGS5 code with class libraries that encapsulate the geometry and scoring aspects of each problem. Some simple example problems are considered in order to illustrate features of the EGS5 + VUI1 package. (author)

Mirror-Image Confusions: Implications for Representation and Processing of Object Orientation

Science.gov (United States)

Gregory, Emma; McCloskey, Michael

2010-01-01

Perceiving the orientation of objects is important for interacting with the world, yet little is known about the mental representation or processing of object orientation information. The tendency of humans and other species to confuse mirror images provides a potential clue. However, the appropriate characterization of this phenomenon is not…

Computer Application Of Object Oriented Database Management ...

African Journals Online (AJOL)

Object Oriented Systems (OOS) have been widely adopted in software engineering because of their superiority with respect to data extensibility. The present trend in the software engineering process (SEP) towards concurrent computing raises novel concerns for the facilities and technology available in database ...

The Performance of an Object-Oriented, Parallel Operating System

Directory of Open Access Journals (Sweden)

David R. Kohr, Jr.

1994-01-01

Full Text Available The nascent and rapidly evolving state of parallel systems often leaves parallel application developers at the mercy of inefficient, inflexible operating system software. Given the relatively primitive state of parallel systems software, maximizing the performance of parallel applications not only requires judicious tuning of the application software, but occasionally, the replacement of specific system software modules with others that can more readily respond to the imposed pattern of resource demands. To assess the feasibility of application and performance tuning via malleable system software and to understand the performance penalties for detailed operating system performance data capture, we describe a set of performance instrumentation techniques for parallel, object-oriented operating systems and a set of performance experiments with Choices, an experimental, object-oriented operating system designed for use with parallel sys- tems. These performance experiments show that (a the performance overhead for operating system data capture is modest, (b the penalty for malleable, object-oriented operating systems is negligible, but (c techniques are needed to strictly enforce adherence of implementation to design if operating system modules are to be replaced.

Object-Oriented Modular Architecture for Ground Combat Simulation

National Research Council Canada - National Science Library

Luqi; Berzins, V; Shing, M; Saluto, M; Williams, J

2000-01-01

.... It describes the effective use of computer-aided prototyping techniques for re-engineering the legacy software to develop an object-oriented modular architecture for the Janus combat simulation system. Janus...

Object oriented run control for the CEBAF data acquisition system

International Nuclear Information System (INIS)

Quarrie, D.R.; Heyes, G.; Jastrzembski, E.; Watson, W.A. III

1992-01-01

After an extensive evaluation, the Eiffel object oriented language has been selected for the design and implementation of the run control portion of the CEBAF Data Acquisition System. The OSF/Motif graphical user interface toolkit and Data Views process control system have been incorporated into this framework. in this paper, the authors discuss the evaluation process, the status of the implementation and the lessons learned, particularly in the use of object oriented techniques

Improving Quality in Object-Oriented Software. Systematic Refinement and Translation of Models to Code

OpenAIRE

Bunse, C.; Atkinson, C.

1999-01-01

The reliable attainment of quality requirements is still a major weakness of the object-oriented development paradigm, with a significant proportion of object-oriented systems either failing to work correctly, or failing to do so in a way that meets non-functional requirements. One of the main reasons for this problem is the discrepancy between the various object-oriented languages/notations typically used during the course of an object-oriented project and the lack of well-defined mappings b...

Predicting class testability using object-oriented metrics

NARCIS (Netherlands)

M. Bruntink (Magiel); A. van Deursen (Arie)

2004-01-01

textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated

Engineering Object-Oriented Semantics Using Graph Transformations

NARCIS (Netherlands)

Kastenberg, H.; Kleppe, A.G.; Rensink, Arend

In this paper we describe the application of the theory of graph transformations to the practise of language design. We have defined the semantics of a small but realistic object-oriented language (called TAAL) by mapping the language constructs to graphs and their operational semantics to graph

Expert reasoning within an object-oriented framework

International Nuclear Information System (INIS)

Bohn, S.J.; Pennock, K.A.

1991-10-01

A large number of contaminated waste sites across the United States await site remediation efforts. These sites can be physically complex, composed of multiple, possibly interacting, contaminants distributed throughout one or more media. The Remedial Action Assessment System (RAAS) is being designed and developed to support decisions concerning the selection of remediation alternatives. The goal of this system is to broaden the consideration of remediation alternatives, while reducing the time and cost of making these considerations. The Remedial Action Assessment System was designed and constructed using object-oriented techniques. It is a hybrid system which uses a combination of quantitative and qualitative reasoning to consider and suggest remediation alternatives. the reasoning process that drives this application is centered around an object-oriented organization of remediation technology information. This paper briefly describes the waste remediation problem and then discusses the information structure and organization RAAS utilizes to address it. 4 refs., 4 figs

An object-oriented approach to evaluating multiple spectral models

International Nuclear Information System (INIS)

Majoras, R.E.; Richardson, W.M.; Seymour, R.S.

1995-01-01

A versatile, spectroscopy analysis engine has been developed by using object-oriented design and analysis techniques coupled with an object-oriented language, C++. This engine provides the spectroscopist with the choice of several different peak shape models that are tailored to the type of spectroscopy being performed. It also allows ease of development in adapting the engine to other analytical methods requiring more complex peak fitting in the future. This results in a program that can currently be used across a wide range of spectroscopy applications and anticipates inclusion of future advances in the field. (author) 6 refs.; 1 fig

The Software Bus, an Object-Oriented Data Exchange System

International Nuclear Information System (INIS)

Akerbaek, T.; Louka, M.

1996-01-01

This document describes the Software Bus System, developed for object-oriented task to task communication in a TCP/IP based network. The Software Bus is a set of library functions, developed to be used for the Picasso-3 UIMS, and as a general purpose tool for dynamically interfacing programs at run-time. The Software Bus offers a high level object-oriented data exchange mechanism that relieves the application programmer of the low level TCP/IP-programming and communication protocol handling. The Software Bus is currently available under several UNIX platforms and a version for Windows NT is planned for late 1996. (author)

An Object-Oriented Metaprogramming System

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Nørgård, Claus

syntactic category of the language, a corresponding class is generated. The syntactic hierarchy of the grammar is mapped into a corresponding class hierarchy. This object-oriented representation of programs is further exploited by including a set of more general classes that view a program as an abstract......The Mjolner programming environment is discussed. A number of tools in this environment are metaprograms, i.e., programs that manipulate other programs. The metaprogramming system is grammar-based in the sense that a metaprogramming tool may be generated from the grammar of any language. For each...

XML as a format of expression of Object-Oriented Petri Nets

Directory of Open Access Journals (Sweden)

Petr Jedlička

2004-01-01

Full Text Available A number of object-oriented (OO variants have so far been devised for Petri Nets (PN. However, none of these variants has ever been described using an open, independent format – such as XML. This article suggests several possibilities and advantages of such a description. The outlined XML language definition for the description of object-oriented Petri Nets (OOPN is based on XMI (description of UML object-oriented models, SOX (simple description of general OO systems and PNML (an XML-based language used for the description of structured and modular PN. For OOPN, the XML form of description represents a standard format for storing as well as for transfer between various OOPN-processing (analysis, simulation, ... tools.

Remote sensing object-oriented approaches coupled with ...

African Journals Online (AJOL)

Hence the combined use of new generation sensor imagery and the employment of object-oriented image classification techniques provided more accurate information on Melia invasion in the study area. This is an encouraging result given the high degree of intermingling of Melia with other plants at the study site.

Static analysis of unbounded structures in object-oriented programs

NARCIS (Netherlands)

Grabe, Immo

2012-01-01

In this thesis we investigate different techniques and formalisms to address complexity introduced by unbounded structures in object-oriented programs. We give a representation of a weakest precondition calculus for abstract object creation in dynamic logic. Based on this calculus we define symbolic

A Block-Structure Concurrent Object-Oriented Language

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann

1998-01-01

The BETA programming language has been developed in the Scandinavian tradition for object-orientation based on Simula. In this tradition, support for modeling and design have been important design goals for programming language design. There has thus been two accompanying design criteria for BETA...... of conceptual means for understanding knowledge abuout the real world. It includes means such as concepts and phenomena, identification of objects, identification of classes, classification, generalization/specialization, multiple classification, refence- and part-of-composition, etc. In this paper we...

GUI and Object Oriented Programming in COBOL.

Science.gov (United States)

Lorents, Alden C.

Various schools are struggling with the introduction of Object Oriented (OO) programming concepts and GUI (graphical user interfaces) within the traditional COBOL sequence. OO programming has been introduced in some of the curricula with languages such as C++, Smalltalk, and Java. Introducing OO programming into a typical COBOL sequence presents…

Query Migration from Object Oriented World to Semantic World

Directory of Open Access Journals (Sweden)

Nassima Soussi

2016-06-01

Full Text Available In the last decades, object-oriented approach was able to take a large share of databases market aiming to design and implement structured and reusable software through the composition of independent elements in order to have programs with a high performance. On the other hand, the mass of information stored in the web is increasing day after day with a vertiginous speed, exposing the currently web faced with the problem of creating a bridge so as to facilitate access to data between different applications and systems as well as to look for relevant and exact information wished by users. In addition, all existing approach of rewriting object oriented languages to SPARQL language rely on models transformation process to guarantee this mapping. All the previous raisons has prompted us to write this paper in order to bridge an important gap between these two heterogeneous worlds (object oriented and semantic web world by proposing the first provably semantics preserving OQLto-SPARQL translation algorithm for each element of OQL Query (SELECT clause, FROM clause, FILTER constraint, implicit/ explicit join and union/intersection SELECT queries.

The artificial-free technique along the objective direction for the simplex algorithm

International Nuclear Information System (INIS)

Boonperm, Aua-aree; Sinapiromsaran, Krung

2014-01-01

The simplex algorithm is a popular algorithm for solving linear programming problems. If the origin point satisfies all constraints then the simplex can be started. Otherwise, artificial variables will be introduced to start the simplex algorithm. If we can start the simplex algorithm without using artificial variables then the simplex iterate will require less time. In this paper, we present the artificial-free technique for the simplex algorithm by mapping the problem into the objective plane and splitting constraints into three groups. In the objective plane, one of variables which has a nonzero coefficient of the objective function is fixed in terms of another variable. Then it can split constraints into three groups: the positive coefficient group, the negative coefficient group and the zero coefficient group. Along the objective direction, some constraints from the positive coefficient group will form the optimal solution. If the positive coefficient group is nonempty, the algorithm starts with relaxing constraints from the negative coefficient group and the zero coefficient group. We guarantee the feasible region obtained from the positive coefficient group to be nonempty. The transformed problem is solved using the simplex algorithm. Additional constraints from the negative coefficient group and the zero coefficient group will be added to the solved problem and use the dual simplex method to determine the new optimal solution. An example shows the effectiveness of our algorithm

The artificial-free technique along the objective direction for the simplex algorithm

Science.gov (United States)

Boonperm, Aua-aree; Sinapiromsaran, Krung

2014-03-01

The simplex algorithm is a popular algorithm for solving linear programming problems. If the origin point satisfies all constraints then the simplex can be started. Otherwise, artificial variables will be introduced to start the simplex algorithm. If we can start the simplex algorithm without using artificial variables then the simplex iterate will require less time. In this paper, we present the artificial-free technique for the simplex algorithm by mapping the problem into the objective plane and splitting constraints into three groups. In the objective plane, one of variables which has a nonzero coefficient of the objective function is fixed in terms of another variable. Then it can split constraints into three groups: the positive coefficient group, the negative coefficient group and the zero coefficient group. Along the objective direction, some constraints from the positive coefficient group will form the optimal solution. If the positive coefficient group is nonempty, the algorithm starts with relaxing constraints from the negative coefficient group and the zero coefficient group. We guarantee the feasible region obtained from the positive coefficient group to be nonempty. The transformed problem is solved using the simplex algorithm. Additional constraints from the negative coefficient group and the zero coefficient group will be added to the solved problem and use the dual simplex method to determine the new optimal solution. An example shows the effectiveness of our algorithm.

Managing the BaBar object oriented database

International Nuclear Information System (INIS)

Hasan, A.; Trunov, A.

2001-01-01

The BaBar experiment stores its data in an Object Oriented federated database supplied by Objectivity/DB(tm). This database is currently 350TB in size and is expected to increase considerably as the experiment matures. Management of this database requires careful planning and specialized tools in order to make the data available to physicists in an efficient and timely manner. The authors discuss the operational issues and management tools that were developed during the previous run to deal with this vast quantity of data at SLAC

PAC++: Object-oriented platform for accelerator codes

International Nuclear Information System (INIS)

Malitsky, N.; Reshetov, A.; Bourianoff, G.

1994-06-01

Software packages in accelerator physics have relatively long life cycles. They had been developed and used for a wide range of accelerators in the past as well as for the current projects. For example, the basic algorithms written in the first accelerator Program TRANSPORT are actual for design of most magnet systems. Most of these packages had been implemented on Fortran. But this language is rather inconvenient as a basic language for large integrated projects that possibly could include real-time data acquisition, data base access, graphic riser interface modules (GUI), arid other features. Some later accelerator programs had been based on object-oriented tools (primarily, C++ language). These range from systems for advanced theoretical studies to control system software. For the new generations of accelerators it would be desirable to have an integrated platform in which all simulation and control tasks will be considered with one point of view. In this report the basic principles of an object-oriented platform for accelerator research software (PAC++) are suggested and analyzed. Primary objectives of this work are to enable efficient self-explaining realization of the accelerator concepts and to provide an integrated environment for the updating and the developing of the code

Object-oriented analysis and design for information systems Modeling with UML, OCL, IFML

CERN Document Server

Wazlawick, Raul Sidnei

2014-01-01

Object-Oriented Analysis and Design for Information Systems clearly explains real object-oriented programming in practice. Expert author Raul Sidnei Wazlawick explains concepts such as object responsibility, visibility and the real need for delegation in detail. The object-oriented code generated by using these concepts in a systematic way is concise, organized and reusable. The patterns and solutions presented in this book are based in research and industrial applications. You will come away with clarity regarding processes and use cases and a clear understand of how to expand a use case.

EMEN2: an object oriented database and electronic lab notebook.

Science.gov (United States)

Rees, Ian; Langley, Ed; Chiu, Wah; Ludtke, Steven J

2013-02-01

Transmission electron microscopy and associated methods, such as single particle analysis, two-dimensional crystallography, helical reconstruction, and tomography, are highly data-intensive experimental sciences, which also have substantial variability in experimental technique. Object-oriented databases present an attractive alternative to traditional relational databases for situations where the experiments themselves are continually evolving. We present EMEN2, an easy to use object-oriented database with a highly flexible infrastructure originally targeted for transmission electron microscopy and tomography, which has been extended to be adaptable for use in virtually any experimental science. It is a pure object-oriented database designed for easy adoption in diverse laboratory environments and does not require professional database administration. It includes a full featured, dynamic web interface in addition to APIs for programmatic access. EMEN2 installations currently support roughly 800 scientists worldwide with over 1/2 million experimental records and over 20 TB of experimental data. The software is freely available with complete source.

Towards Integration of Object-Oriented Languages and State Machines

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann

1999-01-01

The goal of this paper is to obtain a one-to-one correspondence between state machines as e.g. used in UML and object-oriented programming languages. A proposal is made for a language mechanism that makes it possible for an object to change its virtual bindings at run-time. A state of an object may...... then be represented as a set of virtual bindings.One advantage of object-orientation is that it provides an integrating perspective on many phases of software development, including analysis, design and implementation. For the static set of OO language constructs there is almost a one-to-one correspondence between...... analysis/design notations and OO programming languages. No such correspondence exists for the dynamic aspects, but the proposed state-mechanism is a contribution to a better cor respondence. The proposal is based on previous work by Antero Taivalsaari and compared to the more complex features for changing...

Objective - oriented financial analysis introduction

Directory of Open Access Journals (Sweden)

Dessislava Kostova – Pickett

2018-02-01

Full Text Available The practice of financial analysis has been immeasurably strengthened in recent years thanks to the ongoing evolution of computerized approaches in the form of spreadsheets and computer-based financial models of different types. These devices not only relieved the analyst's computing task, but also opened up a wide range of analyzes and research into alternative sensitivity, which so far has not been possible. The main potential for object-oriented financial analysis consists in enormously expanding the analyst's capabilities through an online knowledge and information interface that has not yet been achieved through existing methods and software packages.

31 OBJECTIVE ORIENTED PROBLEM SOLVING A Case Study ...

African Journals Online (AJOL)

succeed but which are not Wlder the direct control of the activities ..... Frequent failure of electrical machines due to intenuption .... suffers high attribution rate of skilled personnel and as a result is .... Management and Objective Oriented Project.

Appropriate language for introducing object oriented programming ...

African Journals Online (AJOL)

Object Oriented Programming (OOP) has attained a level of acceptance in the software development community so much so that one is now considered a charlatan to have a degree in computing without the flare for OOP. Computing students must therefore be equipped with this skill. The need to do this using the most ...

Language comprehenders retain implied shape and orientation of objects.

Science.gov (United States)

Pecher, Diane; van Dantzig, Saskia; Zwaan, Rolf A; Zeelenberg, René

2009-06-01

According to theories of embodied cognition, language comprehenders simulate sensorimotor experiences to represent the meaning of what they read. Previous studies have shown that picture recognition is better if the object in the picture matches the orientation or shape implied by a preceding sentence. In order to test whether strategic imagery may explain previous findings, language comprehenders first read a list of sentences in which objects were mentioned. Only once the complete list had been read was recognition memory tested with pictures. Recognition performance was better if the orientation or shape of the object matched that implied by the sentence, both immediately after reading the complete list of sentences and after a 45-min delay. These results suggest that previously found match effects were not due to strategic imagery and show that details of sensorimotor simulations are retained over longer periods.

Object oriented programming interfaces for accelerator control

International Nuclear Information System (INIS)

Hoff, L.T.

1997-01-01

Several years ago, the AGS controls group was given the task of developing software for the RHIC accelerator. Like the AGS, the RHIC control system needs to control and monitor equipment distributed around a relatively large geographic area. A local area network connects this equipment to a collection of UNIX workstations in a central control room. Similar software had been developed for the AGS about a decade earlier, but isn't well suited for RHIC use for a number of reasons. Rather than adapt the AGS software for RHIC use, the controls group opted to start with a clean slate. To develop software that would address the shortcomings of the AGS software, while preserving the useful features that evolved through years of use. A current trend in control system design is to provide an object oriented programming interface for application developers. This talk will discuss important aspects and features of object oriented application programming interfaces (APIs) for accelerator control systems, and explore why such interfaces are becoming the norm

Data clustering in C++ an object-oriented approach

CERN Document Server

Gan, Guojun

2011-01-01

Data clustering is a highly interdisciplinary field, the goal of which is to divide a set of objects into homogeneous groups such that objects in the same group are similar and objects in different groups are quite distinct. Thousands of theoretical papers and a number of books on data clustering have been published over the past 50 years. However, few books exist to teach people how to implement data clustering algorithms. This book was written for anyone who wants to implement or improve their data clustering algorithms. Using object-oriented design and programming techniques, Data Clusterin

Designing with objects object-oriented design patterns explained with stories from Harry Potter

CERN Document Server

Kak, Avinash C

2014-01-01

 All code examples in the book are available for download on a companion site with resources for readers and instructors A refreshing alternative to the rather abstract and dry explanations of the  object-oriented design patterns in much of the existing literature on the subject In 24 chapters, Designing with Objects explains well-known design patterns by relating them to stories from the Harry Potter series

Narrative theories as computational models: reader-oriented theory and artificial intelligence

Energy Technology Data Exchange (ETDEWEB)

Galloway, P.

1983-12-01

In view of the rapid development of reader-oriented theory and its interest in dynamic models of narrative, the author speculates in a serious way about what such models might look like in computational terms. Researchers in artificial intelligence (AI) have already begun to develop models of story understanding as the emphasis in ai research has shifted toward natural language understanding and as ai has allied itself with cognitive psychology and linguistics to become cognitive science. Research in ai and in narrative theory share many common interests and problems and both studies might benefit from an exchange of ideas. 11 references.

Simple proteomics data analysis in the object-oriented PowerShell.

Science.gov (United States)

Mohammed, Yassene; Palmblad, Magnus

2013-01-01

Scripting languages such as Perl and Python are appreciated for solving simple, everyday tasks in bioinformatics. A more recent, object-oriented command shell and scripting language, Windows PowerShell, has many attractive features: an object-oriented interactive command line, fluent navigation and manipulation of XML files, ability to consume Web services from the command line, consistent syntax and grammar, rich regular expressions, and advanced output formatting. The key difference between classical command shells and scripting languages, such as bash, and object-oriented ones, such as PowerShell, is that in the latter the result of a command is a structured object with inherited properties and methods rather than a simple stream of characters. Conveniently, PowerShell is included in all new releases of Microsoft Windows and therefore already installed on most computers in classrooms and teaching labs. In this chapter we demonstrate how PowerShell in particular allows easy interaction with mass spectrometry data in XML formats, connection to Web services for tools such as BLAST, and presentation of results as formatted text or graphics. These features make PowerShell much more than "yet another scripting language."

Object-oriented design of medical imaging software.

Science.gov (United States)

Ligier, Y; Ratib, O; Logean, M; Girard, C; Perrier, R; Scherrer, J R

1994-01-01

A special software package for interactive display and manipulation of medical images was developed at the University Hospital of Geneva, as part of a hospital wide Picture Archiving and Communication System (PACS). This software package, called Osiris, was especially designed to be easily usable and adaptable to the needs of noncomputer-oriented physicians. The Osiris software has been developed to allow the visualization of medical images obtained from any imaging modality. It provides generic manipulation tools, processing tools, and analysis tools more specific to clinical applications. This software, based on an object-oriented paradigm, is portable and extensible. Osiris is available on two different operating systems: the Unix X-11/OSF-Motif based workstations, and the Macintosh family.

Resource control of object-oriented programs

OpenAIRE

Marion, Jean-Yves; Pechoux, Romain

2007-01-01

International audience; A sup-interpretation is a tool which provides an upper bound on the size of a value computed by some symbol of a program. Sup-interpretations have shown their interest to deal with the complexity of first order functional programs. For instance, they allow to characterize all the functions bitwise computable in \\texttt{Alogtime}. This paper is an attempt to adapt the framework of sup-interpretations to a fragment of oriented-object programs, including distinct encoding...

PSYCHE: An Object-Oriented Approach to Simulating Medical Education

Science.gov (United States)

Mullen, Jamie A.

1990-01-01

Traditional approaches to computer-assisted instruction (CAI) do not provide realistic simulations of medical education, in part because they do not utilize heterogeneous knowledge bases for their source of domain knowledge. PSYCHE, a CAI program designed to teach hypothetico-deductive psychiatric decision-making to medical students, uses an object-oriented implementation of an intelligent tutoring system (ITS) to model the student, domain expert, and tutor. It models the transactions between the participants in complex transaction chains, and uses heterogeneous knowledge bases to represent both domain and procedural knowledge in clinical medicine. This object-oriented approach is a flexible and dynamic approach to modeling, and represents a potentially valuable tool for the investigation of medical education and decision-making.

Orientation of a 3D object: implementation with an artificial neural network using a programmable logic device;Orientacion de un objeto 3D : implementacion de redes neuronales artificiales utilizando logica programable

Energy Technology Data Exchange (ETDEWEB)

Carnevale, Federico J [Universidad Nacional de Cuyo, Instituto Balseiro, Centro Atomico Bariloche (Argentina)

2010-07-01

Complex information extraction from images is a key skill of intelligent machines, with wide application in automated systems, robotic manipulation and human-computer interaction. However, solving this problem with traditional, geometric or analytical, strategies is extremely difficult. Therefore, an approach based on learning from examples seems to be more appropriate. This thesis addresses the problem of 3D orientation, aiming to estimate the angular coordinates of a known object from an image shot from any direction. We describe a system based on artificial neural networks to solve this problem in real time. The implementation is performed using a programmable logic device. The digital system described in this paper has the ability to estimate two rotational coordinates of a 3D known object, in ranges from -80{sup 0} to 80{sup 0}. The operation speed allows a real time performance at video rate. The system accuracy can be successively increased by increasing the size of the artificial neural network and using a larger number of training examples;La extraccion de informacion compleja a partir de imagenes es una habilidad clave en las maquinas inteligentes con vasta aplicacion en los sistemas automatizados, la manipulacion robotica y la interaccion humano-computadora. Sin embargo, resulta una tarea extremadamente dificil de resolver con estrategias clasicas, geometricas o analiticas. Por lo tanto, un enfoque basado en aprendizaje a partir de ejemplos parece mas adecuado. Esta tesis trata acerca del problema de orientacion 3D, cuyo objetivo consiste en estimar las coordenadas angulares de un objeto conocido, a partir de una imagen tomada desde cualquier direccion. Se describe un sistema, basado en redes neuronales artificiales, para resolver este problema en tiempo real. La implementacion, capaz de funcionar a frecuencia de video, se realiza utilizando un dispositivo de logica programable. El sistema digital final demuestra la capacidad de estimar dos coordenadas

The influence of grasping habits and object orientation on motor planning in children and adults.

Science.gov (United States)

Jovanovic, Bianca; Schwarzer, Gudrun

2017-12-01

We investigated the influence of habitual grasp strategies and object orientation on motor planning in 3-year-olds and 4- to 5-year-old children and adults. Participants were required to rotate different vertically oriented objects around 180°. Usually, adults perform this task by grasping objects with an awkward grip (thumb and index finger pointing downward) at the beginning of the movement, in order to finish it with a comfortable hand position. This pattern corresponds to the well-known end-state comfort effect (ESC) in grasp planning. The presented objects were associated with different habitual grasp orientations that either corresponded with the grasp direction required to reach end-state comfort (downward) or implied a contrary grasp orientation (upward). Additionally, they were presented either in their usual, canonical orientation (e.g., shovel with the blade oriented downward versus cup with its opening oriented upward) or upside down. As dependent variable we analyzed the number of grips conforming to the end-state comfort principle (ESC score) realized in each object type and orientation condition. The number of grips conforming to ESC strongly increased with age. In addition, the extent to which end-state comfort was considered was influenced by the actual orientation of the objects' functional parts. Thus, in all age-groups the ESC score was highest when the functional parts of the objects were oriented downward (shovel presented canonically with blade pointing downward, cup presented upside down) and corresponded to the hand orientation needed to realize ESC. © 2017 Wiley Periodicals, Inc.

Object-Oriented Approach to Manipulating Acoustic and Seismic Spectra

National Research Council Canada - National Science Library

Wilson, D. K; Torrey, Jacob I

2006-01-01

The software design and underlying mathematics for an object-oriented, Java-based approach to creating and manipulating frequency-dependent functions, such as power spectral densities, is described...

Analysis and design of the SI-simulator software system for the VHTR-SI process by using the object-oriented analysis and object-oriented design methodology

International Nuclear Information System (INIS)

Chang, Jiwoon; Shin, Youngjoon; Kim, Jihwan; Lee, Kiyoung; Lee, Wonjae; Chang, Jonghwa; Youn, Cheung

2008-01-01

The SI-simulator is an application software system that simulates the dynamic behavior of the VHTR-SI process by the use of mathematical models. Object-oriented analysis (OOA) and object-oriented design (OOD) methodologies were employed for the SI simulator system development. OOA is concerned with developing software engineering requirements and specifications that are expressed as a system's object model (which is composed of a population of interacting objects), as opposed to the traditional data or functional views of systems. OOD techniques are useful for the development of large complex systems. Also, OOA/OOD methodology is usually employed to maximize the reusability and extensibility of a software system. In this paper, we present a design feature for the SI simulator software system by the using methodologies of OOA and OOD

Object-oriented software design in semiautomatic building extraction

Science.gov (United States)

Guelch, Eberhard; Mueller, Hardo

1997-08-01

Developing a system for semiautomatic building acquisition is a complex process, that requires constant integration and updating of software modules and user interfaces. To facilitate these processes we apply an object-oriented design not only for the data but also for the software involved. We use the unified modeling language (UML) to describe the object-oriented modeling of the system in different levels of detail. We can distinguish between use cases from the users point of view, that represent a sequence of actions, yielding in an observable result and the use cases for the programmers, who can use the system as a class library to integrate the acquisition modules in their own software. The structure of the system is based on the model-view-controller (MVC) design pattern. An example from the integration of automated texture extraction for the visualization of results demonstrate the feasibility of this approach.

Representation and Metrics Extraction from Feature Basis: An Object Oriented Approach

Directory of Open Access Journals (Sweden)

Fausto Neri da Silva Vanin

2010-10-01

Full Text Available This tutorial presents an object oriented approach to data reading and metrics extraction from feature basis. Structural issues about basis are discussed first, then the Object Oriented Programming (OOP is aplied to modeling the main elements in this context. The model implementation is then discussed using C++ as programing language. To validate the proposed model, we apply on some feature basis from the University of Carolina, Irvine Machine Learning Database.

A Case Study on Coloured Petri Nets in Object-oriented Analysis and Design

DEFF Research Database (Denmark)

Barros, Joao Paulo; Jørgensen, Jens Bæk

2005-01-01

is structurally and conceptually closer to class diagrams and object-oriented programming languages. The CPN models reduce the gap between user-level requirements and the respective implementation, thus simplifying the implementation or code generation. Finally, we discuss the code generation from object-oriented......In this paper, we first demonstrate how a coloured Petri nets (CPN) model can be used to capture requirements for a considered example system, an elevator controller. Then, we show how this requirements-level CPN model is transformed into a design-level object-oriented CPN model, which...

An application of object-oriented programming to process simulation

International Nuclear Information System (INIS)

Robinson, J.T.; Otaduy, P.J.

1988-01-01

This paper discusses the application of object-oriented programming to dynamic simulation of continuous processes. Processes may be modeled using this technique as a collection of objects which communicate with each other via message passing. Arriving messages invoke methods that describe the state and/or dynamic behavior of the receiving object. The objects fall into four broad categories actual plant components such as pumps, pipes, and tanks, abstract objects such as heat sources and conductors, plant systems such as flow loops, and simulation control and interface objects. This technique differs from traditional approaches to process simulation, in which the process is represented by either a system of differential equations or a block diagram of mathematical operators. The use of objects minimizes the representational gap between the model and actual process. From the users point of view, construction of a simulation model becomes equivalent to drawing a plant schematic. As an example application, a package developed for the simulation of nuclear power plants is described. The package allows users to build simulation models by selecting iconic representations of plant components from a menu and connecting them with a mouse. Objects for generating a mathematical model of the system and for controlling the simulation are automatically generated, freeing the user to concentrate on describing his process. This example illustrates the use of object-oriented programming to create a highly interactive and automated simulation environment. 2 figs

Methodology for object-oriented real-time systems analysis and design: Software engineering

Science.gov (United States)

Schoeffler, James D.

1991-01-01

Successful application of software engineering methodologies requires an integrated analysis and design life-cycle in which the various phases flow smoothly 'seamlessly' from analysis through design to implementation. Furthermore, different analysis methodologies often lead to different structuring of the system so that the transition from analysis to design may be awkward depending on the design methodology to be used. This is especially important when object-oriented programming is to be used for implementation when the original specification and perhaps high-level design is non-object oriented. Two approaches to real-time systems analysis which can lead to an object-oriented design are contrasted: (1) modeling the system using structured analysis with real-time extensions which emphasizes data and control flows followed by the abstraction of objects where the operations or methods of the objects correspond to processes in the data flow diagrams and then design in terms of these objects; and (2) modeling the system from the beginning as a set of naturally occurring concurrent entities (objects) each having its own time-behavior defined by a set of states and state-transition rules and seamlessly transforming the analysis models into high-level design models. A new concept of a 'real-time systems-analysis object' is introduced and becomes the basic building block of a series of seamlessly-connected models which progress from the object-oriented real-time systems analysis and design system analysis logical models through the physical architectural models and the high-level design stages. The methodology is appropriate to the overall specification including hardware and software modules. In software modules, the systems analysis objects are transformed into software objects.

A Fuzzy Approach for Integrated Measure of Object-Oriented Software Testability

OpenAIRE

Vandana Gupta; K. K. Aggarwal; Yogesh Singh

2005-01-01

For large software systems, testing phase seems to have profound effect on the overall acceptability and quality of the final product. The success of this activity can be judged by measuring the testability of the software. A good measure for testability can better manage the testing effort and time. Different Object Oriented Metrics are used in measurement of object-oriented testability but none of them is alone sufficient to give an overall reflection of software testabi...

Object oriented reconstruction software for the Instrumented Flux Return of BABAR

CERN Document Server

Nardo, E D; Lista, L

2001-01-01

BABAR experiment is the first High Energy Physics experiment to extensively use object oriented technology and the C++ programming language for online and offline software. Object orientation permits to reach a high level of flexibility and maintainability of the code, which is a key point in a large project with many developers. These goals are reached with the introduction of reusable code elements, with abstraction of code behaviours and polymorphism. Software design, before code implementation, is the key task that determines the achievement of such a goal. We present the experience with the application of object oriented technology and design patterns to the reconstruction software of the Instrumented Flux Return detector of BABAR experiment. The use of abstract interfaces improved the development of reconstruction code and permitted to flexibly apply modification to reconstruction strategies, and eventually to reduce the maintenance load. The experience during the last years of development is presented....

Improving Object-Oriented Methods by using Fuzzy Logic

NARCIS (Netherlands)

Marcelloni, Francesco; Aksit, Mehmet

2000-01-01

Object-oriented methods create software artifacts through the application of a large number or rules. Rules are typically formulated in two-valued logic. There are a number of problems on how rules are defined and applied in current methods. First, two-valued logic can capture completely neither

Object-oriented user interfaces for personalized mobile learning

CERN Document Server

Alepis, Efthimios

2014-01-01

This book presents recent research in mobile learning and advanced user interfaces. It is shown how the combination of this fields can result in personalized educational software that meets the requirements of state-of-the-art mobile learning software. This book provides a framework that is capable of incorporating the software technologies, exploiting a wide range of their current advances and additionally investigating ways to go even further by providing potential solutions to future challenges. The presented approach uses the well-known Object-Oriented method in order to address these challenges. Throughout this book, a general model is constructed using Object-Oriented Architecture. Each chapter focuses on the construction of a specific part of this model, while in the conclusion these parts are unified. This book will help software engineers build more sophisticated personalized software that targets in mobile education, while at the same time retaining a high level of adaptivity and user-friendliness w...

Featureous: infrastructure for feature-centric analysis of object-oriented software

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2010-01-01

The decentralized nature of collaborations between objects in object-oriented software makes it difficult to understand how user-observable program features are implemented and how their implementations relate to each other. It is worthwhile to improve this situation, since feature-centric program...... understanding and modification are essential during software evolution and maintenance. In this paper, we present an infrastructure built on top of the NetBeans IDE called Featureous that allows for rapid construction of tools for feature-centric analysis of object-oriented software. Our infrastructure...... encompasses a lightweight feature location mechanism, a number of analytical views and an API allowing for addition of third-party extensions. To form a common conceptual framework for future feature-centric extensions, we propose to structure feature centric analysis along three dimensions: perspective...

Object-oriented graphics programming in C++

CERN Document Server

Stevens, Roger T

2014-01-01

Object-Oriented Graphics Programming in C++ provides programmers with the information needed to produce realistic pictures on a PC monitor screen.The book is comprised of 20 chapters that discuss the aspects of graphics programming in C++. The book starts with a short introduction discussing the purpose of the book. It also includes the basic concepts of programming in C++ and the basic hardware requirement. Subsequent chapters cover related topics in C++ programming such as the various display modes; displaying TGA files, and the vector class. The text also tackles subjects on the processing

Formal Transformations from Graphically-Based Object-Oriented Representations to Theory-Based Specifications

Science.gov (United States)

1996-06-01

for Software Synthesis." KBSE 󈨡. IEEE, 1993. 51. Kang, Kyo C., et al. Feature-Oriented Domain Analysis ( FODA ) Feasibility Study. Technical Report...Algebra. New York, NY: Chelsea Publishing Company , 1993. 72. Martin, James. Principles of Object-Oriented Analysis and Design. Englewood Cliffs, New...and usefulness in domain analysis and modeling. Rumbaugh uses three distinct views to describe a domain: (1) the object model describes structural

Cognitive, perceptual and action-oriented representations of falling objects.

Science.gov (United States)

Zago, Myrka; Lacquaniti, Francesco

2005-01-01

We interact daily with moving objects. How accurate are our predictions about objects' motions? What sources of information do we use? These questions have received wide attention from a variety of different viewpoints. On one end of the spectrum are the ecological approaches assuming that all the information about the visual environment is present in the optic array, with no need to postulate conscious or unconscious representations. On the other end of the spectrum are the constructivist approaches assuming that a more or less accurate representation of the external world is built in the brain using explicit or implicit knowledge or memory besides sensory inputs. Representations can be related to naive physics or to context cue-heuristics or to the construction of internal copies of environmental invariants. We address the issue of prediction of objects' fall at different levels. Cognitive understanding and perceptual judgment of simple Newtonian dynamics can be surprisingly inaccurate. By contrast, motor interactions with falling objects are often very accurate. We argue that the pragmatic action-oriented behaviour and the perception-oriented behaviour may use different modes of operation and different levels of representation.

Grasping an object comfortably: orientation information is held in memory

NARCIS (Netherlands)

Roche, K; Verheij, R.; Voudouris, D.; Chainay, H.; Smeets, J.B.J.

2015-01-01

It has been shown that memorized information can influence real-time visuomotor control. For instance, a previously seen object (prime) influences grasping movements toward a target object. In this study, we examined how general the priming effect is: does it depend on the orientation of the target

Determining Attitude of Object from Needle Map Using Extended Gaussian Image.

Science.gov (United States)

1983-04-01

D Images," Artificial Intellignece , Vol 17, August, 1981, 285-349. [6] Marr, D., Vision W.H. Freeman, San Francisco, 1982. [7] Brady, M...Witkin, A.P. "Recovering Surface Shape and Orientation from texture," Artificial Intellignec , Vol. 17, 1982, 17-47. [22] Horn, B.K.P., "SEQUINS and...AD-R131 617 DETERMINING ATTITUDE OF OBJECT FROM NEEDLE MAP USING I/i EXTENDED GAUSSIAN IMRGE(U) MASSACHUSETTS INST OF TECH CAMBRIDGE ARTIFICIAL

Bayesian artificial intelligence

CERN Document Server

Korb, Kevin B

2010-01-01

Updated and expanded, Bayesian Artificial Intelligence, Second Edition provides a practical and accessible introduction to the main concepts, foundation, and applications of Bayesian networks. It focuses on both the causal discovery of networks and Bayesian inference procedures. Adopting a causal interpretation of Bayesian networks, the authors discuss the use of Bayesian networks for causal modeling. They also draw on their own applied research to illustrate various applications of the technology.New to the Second EditionNew chapter on Bayesian network classifiersNew section on object-oriente

APPLYING ARTIFICIAL INTELLIGENCE TECHNIQUES TO HUMAN-COMPUTER INTERFACES

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1988-01-01

A description is given of UIMS (User Interface Management System), a system using a variety of artificial intelligence techniques to build knowledge-based user interfaces combining functionality and information from a variety of computer systems that maintain, test, and configure customer telephone...... and data networks. Three artificial intelligence (AI) techniques used in UIMS are discussed, namely, frame representation, object-oriented programming languages, and rule-based systems. The UIMS architecture is presented, and the structure of the UIMS is explained in terms of the AI techniques....

Java programming fundamentals problem solving through object oriented analysis and design

CERN Document Server

Nair, Premchand S

2008-01-01

While Java texts are plentiful, it's difficult to find one that takes a real-world approach, and encourages novice programmers to build on their Java skills through practical exercise. Written by an expert with 19 experience teaching computer programming, Java Programming Fundamentals presents object-oriented programming by employing examples taken from everyday life. Provides a foundation in object-oriented design principles and UML notation Describes common pitfalls and good programming practicesFurnishes supplemental links, documents, and programs on its companion website, www.premnair.netU

StrateGene: object-oriented programming in molecular biology.

Science.gov (United States)

Carhart, R E; Cash, H D; Moore, J F

1988-03-01

This paper describes some of the ways that object-oriented programming methodologies have been used to represent and manipulate biological information in a working application. When running on a Xerox 1100 series computer, StrateGene functions as a genetic engineering workstation for the management of information about cloning experiments. It represents biological molecules, enzymes, fragments, and methods as classes, subclasses, and members in a hierarchy of objects. These objects may have various attributes, which themselves can be defined and classified. The attributes and their values can be passed from the classes of objects down to the subclasses and members. The user can modify the objects and their attributes while using them. New knowledge and changes to the system can be incorporated relatively easily. The operations on the biological objects are associated with the objects themselves. This makes it easier to invoke them correctly and allows generic operations to be customized for the particular object.

Object-oriented analysis and design of a GEANT based detector simulator

International Nuclear Information System (INIS)

Amako, K.; Kanzaki, J.; Sasaki, T.; Takaiwa, Y.; Nakagawa, Y.; Yamagata, T.

1994-01-01

The authors give a status report of the project to design a detector simulation program by reengineering GEANT with the object-oriented methodology. They followed the Object Modeling Technique. They explain the object model they constructed. Also problems of the technique found during their study are discussed

Object-Oriented Query Language For Events Detection From Images Sequences

Science.gov (United States)

Ganea, Ion Eugen

2015-09-01

In this paper is presented a method to represent the events extracted from images sequences and the query language used for events detection. Using an object oriented model the spatial and temporal relationships between salient objects and also between events are stored and queried. This works aims to unify the storing and querying phases for video events processing. The object oriented language syntax used for events processing allow the instantiation of the indexes classes in order to improve the accuracy of the query results. The experiments were performed on images sequences provided from sport domain and it shows the reliability and the robustness of the proposed language. To extend the language will be added a specific syntax for constructing the templates for abnormal events and for detection of the incidents as the final goal of the research.

System safety and reliability using object-oriented programming techniques

International Nuclear Information System (INIS)

Patterson-Hine, F.A.; Koen, B.V.

1987-01-01

Direct evaluation fault tree codes have been written in recursive, list-processing computer languages such as PL/1 (PATREC-I) and LISP (PATREC-L). The pattern-matching strategy implemented in these codes has been used extensively in France to evaluate system reliability. Recent reviews of the risk management process suggest that a data base containing plant-specific information be integrated with a package of codes used for probabilistic risk assessment (PRA) to alleviate some of the difficulties that make a PRA so costly and time-intensive. A new programming paradigm, object-oriented programming, is uniquely suited for the development of such a software system. A knowledge base and fault tree evaluation algorithm, based on previous experience with PATREC-L, have been implemented using object-oriented techniques, resulting in a reliability assessment environment that is easy to develop, modify, and extend

Model-Based Software Testing for Object-Oriented Software

Science.gov (United States)

Biju, Soly Mathew

2008-01-01

Model-based testing is one of the best solutions for testing object-oriented software. It has a better test coverage than other testing styles. Model-based testing takes into consideration behavioural aspects of a class, which are usually unchecked in other testing methods. An increase in the complexity of software has forced the software industry…

Object Oriented and Functional Programming for Symbolic Manipulation

OpenAIRE

Vlasov, Alexander Yu.

1999-01-01

The advantages of mixed approach with using different kinds of programming techniques for symbolic manipulation are discussed. The main purpose of approach offered is merge the methods of object oriented programming that convenient for presentation data and algorithms for user with advantages of functional languages for data manipulation, internal presentation, and portability of software.

A Survey of Object-Oriented Database Technology

Science.gov (United States)

1990-05-01

now mention briefly the various security and autho- rization schemes provided by GEMSTONE. 1. Login Authorization. There are two ways to login to...GemStone- through the OPAL programming environment or through the GemStone C interface. A user ID and password is required in both cases to login . 2. Name...lIlj A. Black. Object structure in the Emerald system. Proc. Ist Intl. Conf. on Objcct- Oriented Programming Systems, Languages and Applications, pp

An object-oriented software interface to VME

International Nuclear Information System (INIS)

Thomas, Timothy L; Gottlieb, Eric; Gold, Michael

1996-01-01

In the next millennium, data acquisition tasks for high energy physics will increasingly rely on distributed processing and the VME bus. To provide transparent, general-purpose access to VME hardware modules through a VME-embedded processor, we have created a simple, portable, easily configured object-oriented interface to the VME bus. This software is particularly well-suited for hardware development, providing rapid engineering level access to the VME interface of prototype modules. (author)

Benefits of object-oriented models and ModeliChart: modern tools and methods for the interdisciplinary research on smart biomedical technology.

Science.gov (United States)

Gesenhues, Jonas; Hein, Marc; Ketelhut, Maike; Habigt, Moriz; Rüschen, Daniel; Mechelinck, Mare; Albin, Thivaharan; Leonhardt, Steffen; Schmitz-Rode, Thomas; Rossaint, Rolf; Autschbach, Rüdiger; Abel, Dirk

2017-04-01

Computational models of biophysical systems generally constitute an essential component in the realization of smart biomedical technological applications. Typically, the development process of such models is characterized by a great extent of collaboration between different interdisciplinary parties. Furthermore, due to the fact that many underlying mechanisms and the necessary degree of abstraction of biophysical system models are unknown beforehand, the steps of the development process of the application are iteratively repeated when the model is refined. This paper presents some methods and tools to facilitate the development process. First, the principle of object-oriented (OO) modeling is presented and the advantages over classical signal-oriented modeling are emphasized. Second, our self-developed simulation tool ModeliChart is presented. ModeliChart was designed specifically for clinical users and allows independently performing in silico studies in real time including intuitive interaction with the model. Furthermore, ModeliChart is capable of interacting with hardware such as sensors and actuators. Finally, it is presented how optimal control methods in combination with OO models can be used to realize clinically motivated control applications. All methods presented are illustrated on an exemplary clinically oriented use case of the artificial perfusion of the systemic circulation.

Automating the Object-Oriented Software Development Process: Workshop Report

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1998-01-01

Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

Automating the Object-Oriented Software Development Process: Workshop Report

NARCIS (Netherlands)

Aksit, Mehmet; Demeyer, S.; Bosch, H.G.P.; Tekinerdogan, B.

Cost-effective realization of robust, adaptable and reusable software systems demands efficient and effective management of the overall software production process. Current object-oriented methods are not completely formalized and lack the ability of reasoning about the quality of processes and

The Effects of Object Orientation and Object Type on Children's Interpretation of the Word BIG.

Science.gov (United States)

Coley, John D.; Gelman, Susan A.

1989-01-01

Investigated the interpretation of the word "big" by 40 children of 3 to 5 years. The type and orientation of objects used in the study were varied. Results demonstrated that contextual factors influenced children's responses. (RJC)

The Need for Killer Examples for Object-Oriented Frameworks

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Christensen, Henrik Bærbak

2003-01-01

In this paper, we argue in favor of introducing object-oriented frameworks as an important topic in our software engineering teaching. Frameworks provide a basis for students to build interesting and impressive programs even with small programming effort at the introductory level. Frameworks...

Event tree analysis using artificial intelligence techniques

International Nuclear Information System (INIS)

Dixon, B.W.; Hinton, M.F.

1985-01-01

Artificial Intelligence (AI) techniques used in Expert Systems and Object Oriented Programming are discussed as they apply to Event Tree Analysis. A SeQUence IMPortance calculator, SQUIMP, is presented to demonstrate the implementation of these techniques. Benefits of using AI methods include ease of programming, efficiency of execution, and flexibility of application. The importance of an appropriate user interface is stressed. 5 figs

An object-oriented language-database integration model: The composition filters approach

NARCIS (Netherlands)

Aksit, Mehmet; Bergmans, Lodewijk; Vural, Sinan; Vural, S.

1991-01-01

This paper introduces a new model, based on so-called object-composition filters, that uniformly integrates database-like features into an object-oriented language. The focus is on providing persistent dynamic data structures, data sharing, transactions, multiple views and associative access,

An Object-Oriented Language-Database Integration Model: The Composition-Filters Approach

NARCIS (Netherlands)

Aksit, Mehmet; Bergmans, Lodewijk; Vural, S.; Vural, Sinan; Lehrmann Madsen, O.

1992-01-01

This paper introduces a new model, based on so-called object-composition filters, that uniformly integrates database-like features into an object-oriented language. The focus is on providing persistent dynamic data structures, data sharing, transactions, multiple views and associative access,

Feature-based and object-based attention orientation during short-term memory maintenance.

Science.gov (United States)

Ku, Yixuan

2015-12-01

Top-down attention biases the short-term memory (STM) processing at multiple stages. Orienting attention during the maintenance period of STM by a retrospective cue (retro-cue) strengthens the representation of the cued item and improves the subsequent STM performance. In a recent article, Backer et al. (Backer KC, Binns MA, Alain C. J Neurosci 35: 1307-1318, 2015) extended these findings from the visual to the auditory domain and combined electroencephalography to dissociate neural mechanisms underlying feature-based and object-based attention orientation. Both event-related potentials and neural oscillations explained the behavioral benefits of retro-cues and favored the theory that feature-based and object-based attention orientation were independent. Copyright © 2015 the American Physiological Society.

From Procedures To Objects: A Research Agenda For The Psychology Of Object-oriented Programming Education

Directory of Open Access Journals (Sweden)

Jorma Sajaniemi

2008-01-01

Full Text Available Programming education has experienced a shift from imperative and procedural programming to object-orientation. This shift has been motivated by educators' desire to please the information technology industry and potential students; it is not motivated by research either in psychology of programming or in computer science education. There are practically no results that would indicate that such a shift is desirable, needed in the first place, or even effective for learning programming. Moreover, there has been an implicit assumption that classic results on imperative and procedural programming education and learning apply to object-oriented programming (OOP as well. We argue that this is not the case and call for systematic research into the fundamental cognitive and educational issues in learning and teaching OOP. We also present a research agenda intended to improve the understanding of OOP and OOP education.

Object-oriented program specialization: Aspects into Aspects - or maybe not?

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2001-01-01

and control-flow simplifications based on the usage context. Automatic program specialization has recently been defined in the context of object-oriented languages, and is here referred to as object-oriented program specialization. As part of this work, we have developed an automatic program specializer......Automatic program specialization is a software engineering technique that configures a program fragment by generating an implementation dedicated to a specific usage context. Given a generic component that solves a whole family of problems and that is implemented in a standard programming language......, program specialization can automatically configure this component by generating a specialized implementation. We consider automatic program specialization implemented using partial evaluation, which performs aggressive interprocedural constant propagation of all data types, and performs constant folding...

Extension of an Object-Oriented Optimization Tool: User's Reference Manual

Science.gov (United States)

Pak, Chan-Gi; Truong, Samson S.

2015-01-01

The National Aeronautics and Space Administration Armstrong Flight Research Center has developed a cost-effective and flexible object-oriented optimization (O (sup 3)) tool that leverages existing tools and practices and allows easy integration and adoption of new state-of-the-art software. This object-oriented framework can integrate the analysis codes for multiple disciplines, as opposed to relying on one code to perform analysis for all disciplines. Optimization can thus take place within each discipline module, or in a loop between the O (sup 3) tool and the discipline modules, or both. Six different sample mathematical problems are presented to demonstrate the performance of the O (sup 3) tool. Instructions for preparing input data for the O (sup 3) tool are detailed in this user's manual.

Framework for Computer-Aided Evolution of Object-Oriented Designs

NARCIS (Netherlands)

Ciraci, S.; van den Broek, P.M.; Aksit, Mehmet

2008-01-01

In this paper, we describe a framework for the computer aided evolution of the designs of object-oriented software systems. Evolution mechanisms are software structures that prepare software for certain type of evolutions. The framework uses a database which holds the evolution mechanisms, modeled

Rotation of vertically oriented objects during earthquakes

Science.gov (United States)

Hinzen, Klaus-G.

2012-10-01

Vertically oriented objects, such as tombstones, monuments, columns, and stone lanterns, are often observed to shift and rotate during earthquake ground motion. Such observations are usually limited to the mesoseismal zone. Whether near-field rotational ground motion components are necessary in addition to pure translational movements to explain the observed rotations is an open question. We summarize rotation data from seven earthquakes between 1925 and 2009 and perform analog and numeric rotation testing with vertically oriented objects. The free-rocking motion of a marble block on a sliding table is disturbed by a pulse in the direction orthogonal to the rocking motion. When the impulse is sufficiently strong and occurs at the `right' moment, it induces significant rotation of the block. Numeric experiments of a free-rocking block show that the initiation of vertical block rotation by a cycloidal acceleration pulse applied orthogonal to the rocking axis depends on the amplitude of the pulse and its phase relation to the rocking cycle. Rotation occurs when the pulse acceleration exceeds the threshold necessary to provoke rocking of a resting block, and the rocking block approaches its equilibrium position. Experiments with blocks subjected to full 3D strong motion signals measured during the 2009 L'Aquila earthquake confirm the observations from the tests with analytic ground motions. Significant differences in the rotational behavior of a monolithic block and two stacked blocks exist.

OKBL: A language for representing object oriented knowledge

International Nuclear Information System (INIS)

Matsumoto, Y.; Sugiyai, I.; Ishikawa, K.

1984-01-01

Industrial system is operated by using numerous ''operator's knowledge'' about the system. Each knowledge can be regarded as an object and is represented and maintained as an 'ACTOR' and written in a language based on the actor concept. OKBL (Object Oriented Operational KnowledgeBase Management Language) is the language proposed here for this purpose and used in OKBS (a system based on OKBL). The OKBS inference mechanism on the knowledgebase written in OKBL is implemented by message passings among ACTORs. OKBS has been applied to the guidance system for the operators of electric power dispatch control stations

Automatic Verification of Transactions on an Object-Oriented Database

NARCIS (Netherlands)

Spelt, D.; Balsters, H.

1998-01-01

In the context of the object-oriented data model, a compiletime approach is given that provides for a significant reduction of the amount of run-time transaction overhead due to integrity constraint checking. The higher-order logic Isabelle theorem prover is used to automatically prove which

Object-oriented analysis and design of a health care management information system.

Science.gov (United States)

Krol, M; Reich, D L

1999-04-01

We have created a prototype for a universal object-oriented model of a health care system compatible with the object-oriented approach used in version 3.0 of the HL7 standard for communication messages. A set of three models has been developed: (1) the Object Model describes the hierarchical structure of objects in a system--their identity, relationships, attributes, and operations; (2) the Dynamic Model represents the sequence of operations in time as a collection of state diagrams for object classes in the system; and (3) functional Diagram represents the transformation of data within a system by means of data flow diagrams. Within these models, we have defined major object classes of health care participants and their subclasses, associations, attributes and operators, states, and behavioral scenarios. We have also defined the major processes and subprocesses. The top-down design approach allows use, reuse, and cloning of standard components.

Nesting in an Object Oriented Language is NOT for the Birds

Science.gov (United States)

Buhr, P. A.; Zarnke, C. R.

The notion of nested blocks has come into disfavour or has been ignored in recent program language design. Many of the current object oriented programming languages use subclassing as the sole mechanism to establish relationships between classes and have no general notion of nesting. We argue that nesting (and, more generally, hierarchical organization) is a powerful mechanism that provides facilities that are not otherwise possible in a class based programming language. We agree that traditional block structure and its associated nesting have severe problems, and we suggest several extensions to the notion of blocks and block structure that indirectly make nesting a useful and powerful mechanism, particularly in an object oriented programming system. The main extension is to allow references to definitions from outside of the containing block, thereby making the contained definitions available in a larger scope. References are made using either the name of the containing entity or an instance of the containing entity. The extensions suggest a way to organize the programming environment for a large, multi-user system. These facilities are not available with subclassing, and subclassing provides facilities not available by nesting; hence, an object oriented language can benefit by providing nesting as well.

Aspects on Teaching/Learning with Object Oriented Programming for Entry Level Courses of Engineering.

Science.gov (United States)

de Oliveira, Clara Amelia; Conte, Marcos Fernando; Riso, Bernardo Goncalves

This work presents a proposal for Teaching/Learning, on Object Oriented Programming for Entry Level Courses of Engineering and Computer Science, on University. The philosophy of Object Oriented Programming comes as a new pattern of solution for problems, where flexibility and reusability appears over the simple data structure and sequential…

Method for Statically Checking an Object-oriented Computer Program Module

Science.gov (United States)

Bierhoff, Kevin M. (Inventor); Aldrich, Jonathan (Inventor)

2012-01-01

A method for statically checking an object-oriented computer program module includes the step of identifying objects within a computer program module, at least one of the objects having a plurality of references thereto, possibly from multiple clients. A discipline of permissions is imposed on the objects identified within the computer program module. The permissions enable tracking, from among a discrete set of changeable states, a subset of states each object might be in. A determination is made regarding whether the imposed permissions are violated by a potential reference to any of the identified objects. The results of the determination are output to a user.

An object-oriented programming paradigm for parallelization of computational fluid dynamics

International Nuclear Information System (INIS)

Ohta, Takashi.

1997-03-01

We propose an object-oriented programming paradigm for parallelization of scientific computing programs, and show that the approach can be a very useful strategy. Generally, parallelization of scientific programs tends to be complicated and unportable due to the specific requirements of each parallel computer or compiler. In this paper, we show that the object-oriented programming design, which separates the parallel processing parts from the solver of the applications, can achieve the large improvement in the maintenance of the codes, as well as the high portability. We design the program for the two-dimensional Euler equations according to the paradigm, and evaluate the parallel performance on IBM SP2. (author)

C++ Toolbox for Object-Oriented Modeling and Dynamic Simulation of Physical Systems

DEFF Research Database (Denmark)

Wagner, Falko Jens; Poulsen, Mikael Zebbelin

1999-01-01

This paper presents the efforts made in an ongoing project that exploits the advantages of using object-oriented methodologies for describing and simulating dynamical systems. The background for this work is a search for new and better ways to simulate physical systems.......This paper presents the efforts made in an ongoing project that exploits the advantages of using object-oriented methodologies for describing and simulating dynamical systems. The background for this work is a search for new and better ways to simulate physical systems....

Programming paradigms in an object-oriented multi-media standard

NARCIS (Netherlands)

D.J. Duke; I. Herman (Ivan)

1997-01-01

textabstractOf the various programming paradigms in use today, object-orientation is probably the most successful in terms of industrial take-up and application, particularly in the field of multimedia. It is therefore unsurprising that this technology has been adopted by ISO/IEC JTC1/SC24 as the

Object Oriented Software Development Using A Use-Cases Approach

African Journals Online (AJOL)

This paper presents a systematic approach to the analysis and design of an online banking system using the Use-Cases method of Jacobson. This analysis and design method will support the development of highly effective reuseable code, thus bringing the benefits of object orientation into important software projects.

Object-Oriented Analysis, Structured Analysis, and Jackson System Development

NARCIS (Netherlands)

Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

1991-01-01

Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

Quick Prototyping of Educational Software: An Object-Oriented Approach.

Science.gov (United States)

Wong, Simon C-H

1994-01-01

Introduces and demonstrates a quick-prototyping model for educational software development that can be used by teachers developing their own courseware using an object-oriented programming system. Development of a courseware package called "The Match-Maker" is explained as an example that uses HyperCard for quick prototyping. (Contains…

Determining the orientation of the observed object in threedimensional space using stereo vision methods

International Nuclear Information System (INIS)

Ponomarev, S

2014-01-01

The task of matching image of an object with its template is central for many optoelectronic systems. Solution of the matching problem in three-dimensional space in contrast to the structural alignment in the image plane allows using a larger amount of information about the object for determining its orientation, which may increase the probability of correct matching. In the case of stereo vision methods for constructing a three-dimensional image of the object, it becomes possible to achieve invariance w.r.t. background and distance to the observed object. Only three of the orientation angle of the object relative to the camera are uncertain and require measurements. This paper proposes a method for determining the orientation angles of the observed object in three-dimensional space, which is based on the processing of stereo image sequences. Disparity map segmentation method that allows one to ensure the invariance of the background is presented. Quantitative estimates of the effectiveness of the proposed method are presented and discussed.

Predicting class testability using object-oriented metrics

OpenAIRE

Bruntink, Magiel; Deursen, Arie

2004-01-01

textabstractIn this paper we investigate factors of the testability of object-oriented software systems. The starting point is given by a study of the literature to obtain both an initial model of testability and existing OO metrics related to testability. Subsequently, these metrics are evaluated by means of two case studies of large Java systems for which JUnit test cases exist. The goal of this paper is to define and evaluate a set of metrics that can be used to assess the testability of t...

Monte Carlo and detector simulation in OOP [Object-Oriented Programming

International Nuclear Information System (INIS)

Atwood, W.B.; Blankenbecler, R.; Kunz, P.; Burnett, T.; Storr, K.M.

1990-10-01

Object-Oriented Programming techniques are explored with an eye toward applications in High Energy Physics codes. Two prototype examples are given: McOOP (a particle Monte Carlo generator) and GISMO (a detector simulation/analysis package)

The Role of Graphic Orientations in Children's Drawings of Familiar and Novel Objects at Rest and in Motion.

Science.gov (United States)

Ives, William; Rovet, Joanne

1979-01-01

Reports three experiments which investigate: whether familiar objects have standard graphic orientations (Experiment 1); the relationship between use of object orientations and more conventional methods in depicting familiar objects in motion (Experiment 2); and whether orientations are used differently in novel objects whose only defining feature…

Object-Oriented/Data-Oriented Design of a Direct Simulation Monte Carlo Algorithm

Science.gov (United States)

Liechty, Derek S.

2014-01-01

Over the past decade, there has been much progress towards improved phenomenological modeling and algorithmic updates for the direct simulation Monte Carlo (DSMC) method, which provides a probabilistic physical simulation of gas Rows. These improvements have largely been based on the work of the originator of the DSMC method, Graeme Bird. Of primary importance are improved chemistry, internal energy, and physics modeling and a reduction in time to solution. These allow for an expanded range of possible solutions In altitude and velocity space. NASA's current production code, the DSMC Analysis Code (DAC), is well-established and based on Bird's 1994 algorithms written in Fortran 77 and has proven difficult to upgrade. A new DSMC code is being developed in the C++ programming language using object-oriented and data-oriented design paradigms to facilitate the inclusion of the recent improvements and future development activities. The development efforts on the new code, the Multiphysics Algorithm with Particles (MAP), are described, and performance comparisons are made with DAC.

The use of an object oriented technique for fault diagnosis in nuclear reactors

International Nuclear Information System (INIS)

Jalel, N.A.; Nicholson, H.

1990-11-01

In recent years there has been an increased growth of interest in object oriented programming which is a new approach to software construction having wide application. The possibility of using object oriented programming to build a software package that will assist the nuclear reactor operator in diagnosing any faults or alarms in the Loss Of Fluid Test (LOFT), a small scale pressurised water reactor, reactor is investigated in this work. (author)

A new weighted fuzzy grammar on object oriented database queries

Directory of Open Access Journals (Sweden)

Ali Haroonabadi

2012-08-01

Full Text Available The fuzzy object oriented database model is often used to handle the existing imprecise and complicated objects for many real-world applications. The main focus of this paper is on fuzzy queries and tries to analyze a complicated and complex query to get more meaningful and closer responses. The method permits the user to provide the possibility of allocating the weight to various parts of the query, which makes it easier to follow better goals and return the target objects.

An Object-Oriented Approach of Keyword Querying over Fuzzy XML

Directory of Open Access Journals (Sweden)

Ting Li

2016-09-01

Full Text Available As the fuzzy data management has become one of the main research topics and directions, the question of how to obtain the useful information by means of keyword query from fuzzy XML documents is becoming a subject of an increasing needed investigation. Considering the keyword query methods on crisp XML documents, smallest lowest common ancestor (SLCA semantics is one of the most widely accepted semantics. When users propose the keyword query on fuzzy XML documents with the SLCA semantics, the query results are always incomplate, with low precision, and with no possibilities values returned. Most of keyword query semantics on XML documents only consider query results matching all keywords, yet users may also be interested in the query results matching partial keywords. To overcome these limitations, in this paper, we investigate how to obtain more comprehensive and meaningful results of keyword querying on fuzzy XML documents. We propose a semantics of object-oriented keyword querying on fuzzy XML documents. First, we introduce the concept of "object tree", analyze different types of matching result object trees and find the "minimum result object trees" which contain all keywords and "result object trees" which contain partial keywords. Then an object-oriented keyword query algorithm ROstack is proposed to obtain the root nodes of these matching result object trees, together with their possibilities. At last, experiments are conducted to verify the effectiveness and efficiency of our proposed algorithm.

Enhancing Problem-Solving Capabilities Using Object-Oriented Programming Language

Science.gov (United States)

Unuakhalu, Mike F.

2009-01-01

This study integrated object-oriented programming instruction with transfer training activities in everyday tasks, which might provide a mechanism that can be used for efficient problem solving. Specifically, a Visual BASIC embedded with everyday tasks group was compared to another group exposed to Visual BASIC instruction only. Subjects were 40…

Proposed Framework which Uses Object Oriented Principles in Relational Systems: Structure and Formating (Part 2

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2006-01-01

Full Text Available Our approach tries to overcome the limitations of so called “flat nature” of relational systems, in the actual context of actual relational database theories, database systems technologies and object oriented methodologies by proposing an MDA framework to map an object oriented (UML formalized model to object-relational structures of today’s database systems.

Intact perception but abnormal orientation towards face-like objects in young children with ASD.

Science.gov (United States)

Guillon, Quentin; Rogé, Bernadette; Afzali, Mohammad H; Baduel, Sophie; Kruck, Jeanne; Hadjikhani, Nouchine

2016-02-25

There is ample behavioral evidence of diminished orientation towards faces as well as the presence of face perception impairments in autism spectrum disorder (ASD), but the underlying mechanisms of these deficits are still unclear. We used face-like object stimuli that have been shown to evoke pareidolia in typically developing (TD) individuals to test the effect of a global face-like configuration on orientation and perceptual processes in young children with ASD and age-matched TD controls. We show that TD children were more likely to look first towards upright face-like objects than children with ASD, showing that a global face-like configuration elicit a stronger orientation bias in TD children as compared to children with ASD. However, once they were looking at the stimuli, both groups spent more time exploring the upright face-like object, suggesting that they both perceived it as a face. Our results are in agreement with abnormal social orienting in ASD, possibly due to an abnormal tuning of the subcortical pathway, leading to poor orienting and attention towards faces. Our results also indicate that young children with ASD can perceive a generic face holistically, such as face-like objects, further demonstrating holistic processing of faces in ASD.

Beginning Java programming the object-oriented approach

CERN Document Server

Baesens, Bart; vanden Broucke, Seppe

2015-01-01

A comprehensive Java guide, with samples, exercises, case studies, and step-by-step instruction Beginning Java Programming: The Object Oriented Approach is a straightforward resource for getting started with one of the world's most enduringly popular programming languages. Based on classes taught by the authors, the book starts with the basics and gradually builds into more advanced concepts. The approach utilizes an integrated development environment that allows readers to immediately apply what they learn, and includes step-by-step instruction with plenty of sample programs. Each chapter c

Proposed Framework which Uses Object Oriented Principles in Relational Systems: Structure and Formating (Part 2)

OpenAIRE

Catalin STRIMBEI

2006-01-01

Our approach tries to overcome the limitations of so called “flat nature†of relational systems, in the actual context of actual relational database theories, database systems technologies and object oriented methodologies by proposing an MDA framework to map an object oriented (UML formalized) model to object-relational structures of today’s database systems.

Checking and Measuring the Architectural Structural Conformance of Object-Oriented Systems

National Research Council Canada - National Science Library

Abi-Antoun, Marwan; Aldrich, Jonathan

2007-01-01

.... In contrast to existing approaches, our approach uses static analyses, and works with existing Java-like programming languages, existing object-oriented designs and existing integrated development environments...

An object-oriented framework for magnetic-fusion modeling and analysis codes

International Nuclear Information System (INIS)

Cohen, R H; Yang, T Y Brian.

1999-01-01

The magnetic-fusion energy (MFE) program, like many other scientific and engineering activities, has a need to efficiently develop complex modeling codes which combine detailed models of components to make an integrated model of a device, as well as a rich supply of legacy code that could provide the component models. There is also growing recognition in many technical fields of the desirability of steerable software: computer programs whose functionality can be changed by the user as it is run. This project had as its goals the development of two key pieces of infrastructure that are needed to combine existing code modules, written mainly in Fortran, into flexible, steerable, object-oriented integrated modeling codes for magnetic- fusion applications. These two pieces are (1) a set of tools to facilitate the interfacing of Fortran code with a steerable object-oriented framework (which we have chosen to be based on PythonlW3, an object-oriented interpreted language), and (2) a skeleton for the integrated modeling code which defines the relationships between the modules. The first of these activities obviously has immediate applicability to a spectrum of projects; the second is more focussed on the MFE application, but may be of value as an example for other applications

Weak Arithmetic Completeness of Object-Oriented First-Order Assertion Networks

NARCIS (Netherlands)

C.P.T. de Gouw (Stijn); F.S. de Boer (Frank); W. Ahrendt (Wolfgang); R. Bubel (Richard); P. van Emde Boas; F.C.A. Groen; G.F. Italiano; J.R. Nawrocki; H. Sack

2013-01-01

htmlabstractWe present a completeness proof of the inductive assertion method for object-oriented programs extended with auxiliary variables. The class of programs considered are assumed to compute over structures which include the standard interpretation of Presburger arithmetic. Further, the

Artificial emotion triggered stochastic behavior transitions with motivational gain effects for multi-objective robot tasks

Science.gov (United States)

Dağlarli, Evren; Temeltaş, Hakan

2007-04-01

This paper presents artificial emotional system based autonomous robot control architecture. Hidden Markov model developed as mathematical background for stochastic emotional and behavior transitions. Motivation module of architecture considered as behavioral gain effect generator for achieving multi-objective robot tasks. According to emotional and behavioral state transition probabilities, artificial emotions determine sequences of behaviors. Also motivational gain effects of proposed architecture can be observed on the executing behaviors during simulation.

Advanced software development workstation: Object-oriented methodologies and applications for flight planning and mission operations

Science.gov (United States)

Izygon, Michel

1993-01-01

The work accomplished during the past nine months in order to help three different organizations involved in Flight Planning and in Mission Operations systems, to transition to Object-Oriented Technology, by adopting one of the currently most widely used Object-Oriented analysis and Design Methodology is summarized.

Object-oriented spatial-temporal association rules mining on ocean remote sensing imagery

International Nuclear Information System (INIS)

Xue, C J; Dong, Q; Ma, W X

2014-01-01

Using the long term marine remote sensing imagery, we develop an object-oriented spatial-temporal association rules mining framework to explore the association rules mining among marine environmental elements. Within the framework, two key issues are addressed. They are how to effectively deal with the related lattices and how to reduce the related dimensions? To deal with the first key issues, this paper develops an object-oriented method for abstracting marine sensitive objects from raster pixels and for representing them with a quadruple. To deal with the second key issues, by embedding the mutual information theory, we construct the direct association pattern tree to reduce the related elements at the first step, and then the Apriori algorithm is used to discover the spatio-temporal associated rules. Finally, Pacific Ocean is taken as a research area and multi- marine remote sensing imagery in recent three decades is used as a case study. The results show that the object-oriented spatio-temporal association rules mining can acquire the associated relationships not only among marine environmental elements in same region, also among the different regions. In addition, the information from association rules mining is much more expressive and informative in space and time than traditional spatio-temporal analysis

Object-Oriented Approach to Modeling Units of Pneumatic Systems

Directory of Open Access Journals (Sweden)

Yu. V. Kyurdzhiev

2014-01-01

Full Text Available The article shows the relevance of the approaches to the object-oriented programming when modeling the pneumatic units (PU.Based on the analysis of the calculation schemes of aggregates pneumatic systems two basic objects, namely a cavity flow and a material point were highlighted.Basic interactions of objects are defined. Cavity-cavity interaction: ex-change of matter and energy with the flows of mass. Cavity-point interaction: force interaction, exchange of energy in the form of operation. Point-point in-teraction: force interaction, elastic interaction, inelastic interaction, and inter-vals of displacement.The authors have developed mathematical models of basic objects and interactions. Models and interaction of elements are implemented in the object-oriented programming.Mathematical models of elements of PU design scheme are implemented in derived from the base class. These classes implement the models of flow cavity, piston, diaphragm, short channel, diaphragm to be open by a given law, spring, bellows, elastic collision, inelastic collision, friction, PU stages with a limited movement, etc.A numerical integration of differential equations for the mathematical models of PU design scheme elements is based on the Runge-Kutta method of the fourth order. On request each class performs a tact of integration i.e. calcu-lation of the coefficient method.The paper presents an integration algorithm of the system of differential equations. All objects of the PU design scheme are placed in a unidirectional class list. Iterator loop cycle initiates the integration tact of all the objects in the list. One in four iteration makes a transition to the next step of integration. Calculation process stops when any object shows a shutdowns flag.The proposed approach was tested in the calculation of a number of PU designs. With regard to traditional approaches to modeling, the authors-proposed method features in easy enhancement, code reuse, high reliability

COOMA: AN OBJECT-ORIENTED STOCHASTIC OPTIMIZATION ALGORITHM

Directory of Open Access Journals (Sweden)

Stanislav Alexandrovich Tavridovich

2017-09-01

Full Text Available Stochastic optimization methods such as genetic algorithm, particle swarm optimization algorithm, and others are successfully used to solve optimization problems. They are all based on similar ideas and need minimal adaptation when being implemented. But several factors complicate the application of stochastic search methods in practice: multimodality of the objective function, optimization with constraints, finding the best parameter configuration of the algorithm, the increasing of the searching space, etc. This paper proposes a new Cascade Object Optimization and Modification Algorithm (COOMA which develops the best ideas of known stochastic optimization methods and can be applied to a wide variety of real-world problems described in the terms of object-oriented models with practically any types of parameters, variables, and associations between objects. The objects of different classes are organized in pools and pools form the hierarchical structure according to the associations between classes. The algorithm is also executed according to the pool structure: the methods of the upper-level pools before changing their objects call the analogous methods of all their subpools. The algorithm starts with initialization step and then passes through a number of iterations during which the objects are modified until the stop criteria are satisfied. The objects are modified using movement, replication and mutation operations. Two-level version of COOMA realizes a built-in self-adaptive mechanism. The optimization statistics for a number of test problems shows that COOMA is able to solve multi-level problems (with objects of different associated classes, problems with multimodal fitness functions and systems of constraints. COOMA source code on Java is available on request.

Simultaneous positioning and orientation of a single nano-object by flow control: theory and simulations

International Nuclear Information System (INIS)

Mathai, Pramod P; Berglund, Andrew J; Alexander Liddle, J; Shapiro, Benjamin A

2011-01-01

In this paper, we theoretically describe a method to simultaneously control both the position and orientation of single nano-objects in fluids by precisely controlling the flow around them. We develop and simulate a control law that uses electro-osmotic flow (EOF) actuation to translate and rotate rigid nano-objects in two spatial dimensions. Using EOF to control nano-objects offers advantages as compared to other approaches: a wide class of objects can be manipulated (no magnetic or electric dipole moments are needed), the object can be controlled over a long range (>100 μm) with sub-micrometer accuracy, and control may be achieved with simple polydimethylsiloxane (PDMS) devices. We demonstrate the theory and numerical solutions that will enable deterministic control of the position and orientation of a nano-object in solution, which can be used, for example, to integrate nanostructures in circuits and orient sensors to probe living cells.

Electromyogram synergy control of a dexterous artificial hand to unscrew and screw objects.

Science.gov (United States)

Kent, Benjamin A; Karnati, Nareen; Engeberg, Erik D

2014-03-21

Due to their limited dexterity, it is currently not possible to use a commercially available prosthetic hand to unscrew or screw objects without using elbow and shoulder movements. For these tasks, prosthetic hands function like a wrench, which is unnatural and limits their use in tight working environments. Results from timed rotational tasks with human subjects demonstrate the clinical need for increased dexterity of prosthetic hands, and a clinically viable solution to this problem is presented for an anthropomorphic artificial hand. Initially, a human hand motion analysis was performed during a rotational task. From these data, human hand synergies were derived and mapped to an anthropomorphic artificial hand. The synergy for the artificial hand is controlled using conventional dual site electromyogram (EMG) signals. These EMG signals were mapped to the developed synergy to control four joints of the dexterous artificial hand simultaneously.Five limb absent and ten able-bodied test subjects participated in a comparison study to complete a timed rotational task as quickly as possible with their natural hands (except for one subject with a bilateral hand absence), eight commercially available prosthetic hands, and the proposed synergy controller. Each test subject used two to four different artificial hands. With the able-bodied subjects, the developed synergy controller reduced task completion time by 177% on average. The limb absent subjects completed the task faster on average than with their own prostheses by 46%. There was a statistically significant improvement in task completion time with the synergy controller for three of the four limb absent participants with integrated prostheses, and was not statistically different for the fourth. The proposed synergy controller reduced average task completion time compared to commercially available prostheses. Additionally, the synergy controller is able to function in a small workspace and requires less physical

The Nature of an Object-Oriented Program: How Do Practitioners Understand the Nature of What They Are Creating?

Science.gov (United States)

Thompson, Errol; Kinshuk

2011-01-01

Object-oriented programming is seen as a difficult skill to master. There is considerable debate about the most appropriate way to introduce novice programmers to object-oriented concepts. Is it possible to uncover what the critical aspects or features are that enhance the learning of object-oriented programming? Practitioners have differing…

Head First Object-Oriented Analysis and Design

CERN Document Server

McLaughlin, Brett D; West, David

2006-01-01

"Head First Object Oriented Analysis and Design is a refreshing look at subject of OOAD. What sets this book apart is its focus on learning. The authors have made the content of OOAD accessible, usable for the practitioner." Ivar Jacobson, Ivar Jacobson Consulting "I just finished reading HF OOA&D and I loved it! The thing I liked most about this book was its focus on why we do OOA&D-to write great software!" Kyle Brown, Distinguished Engineer, IBM "Hidden behind the funny pictures and crazy fonts is a serious, intelligent, extremely well-crafted presentation of OO Analysis and Design

Object-Oriented Wavelet-Layered Digital Watermarking Technique

Institute of Scientific and Technical Information of China (English)

LIU Xiao-yun; YU Jue-bang; LI Ming-yu

2005-01-01

In this paper, an object-oriented digital watermarking technique is proposed in the wavelet domain for still images. According to the difference of recognition degree of the human eye to the different region of the image, the image is divided into the interested region and uninterested region of human eye vision in this scheme. Using the relativity of position and the difference to ocular sensitivity of the multiresolution wavelet among each subband, the image is processed with layered watermarking append technique. Experimental results show that the proposed technique successfully survives image processing operations, additive noise and JPEG compression.

A novice's process of object-oriented programming

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Kölling, Michael

2006-01-01

Exposing students to the process of programming is merely implied but not explicitly addressed in texts on programming which appear to deal with 'program' as a noun rather than as a verb.We present a set of principles and techniques as well as an informal but systematic process of decomposing...... a programming problem. Two examples are used to demonstrate the application of process and techniques.The process is a carefully down-scaled version of a full and rich software engineering process particularly suited for novices learning object-oriented programming. In using it, we hope to achieve two things...

Mediman: Object oriented programming approach for medical image analysis

International Nuclear Information System (INIS)

Coppens, A.; Sibomana, M.; Bol, A.; Michel, C.

1993-01-01

Mediman is a new image analysis package which has been developed to analyze quantitatively Positron Emission Tomography (PET) data. It is object-oriented, written in C++ and its user interface is based on InterViews on top of which new classes have been added. Mediman accesses data using external data representation or import/export mechanism which avoids data duplication. Multimodality studies are organized in a simple database which includes images, headers, color tables, lists and objects of interest (OOI's) and history files. Stored color table parameters allow to focus directly on the interesting portion of the dynamic range. Lists allow to organize the study according to modality, acquisition protocol, time and spatial properties. OOI's (points, lines and regions) are stored in absolute 3-D coordinates allowing correlation with other co-registered imaging modalities such as MRI or SPECT. OOI's have visualization properties and are organized into groups. Quantitative ROI analysis of anatomic images consists of position, distance, volume calculation on selected OOI's. An image calculator is connected to mediman. Quantitation of metabolic images is performed via profiles, sectorization, time activity curves and kinetic modeling. Mediman is menu and mouse driven, macro-commands can be registered and replayed. Its interface is customizable through a configuration file. The benefit of the object-oriented approach are discussed from a development point of view

Object oriented software development in the atlas collaboration

International Nuclear Information System (INIS)

Schaffer, A.

1994-01-01

For more than a year a group within the Atlas Collaboration has been investigating the possibilities of the application of object oriented methodology and program development to the software of Atlas. Recently this group has been joined by members of the CMS Collaboration in the submission of a proposal to the DRDC at CERN to find a common solution for the software development environment for LHC. This talk will discuss the progress achieved so far and the future perspective

NPA4K development system using object-oriented methodology

International Nuclear Information System (INIS)

Jeong, Kwang Seong; Hahn, Do Hee

2000-11-01

NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced

NPA4K development system using object-oriented methodology

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwang Seong; Hahn, Do Hee

2000-11-01

NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced.

The International Accounting Standards Board’s Progress in Promoting Judgement Through Objectives-Oriented Accounting Standards

Directory of Open Access Journals (Sweden)

Tanja Lakovic

2013-07-01

Full Text Available This study analyzes how the International Accounting Standards Board (IASB promotes professional judgement by issuing objectives-oriented accounting standards and exposure drafts.  We focus on the the role of judgement as outlined in Phase I of the IASB Conceptual Framework (CF, Chapter 1, “Objective of General Purpose Financial Statements” and Chapter 3, “Qualitative Characteristics of Useful Financial Information” (IASB 2010. We discuss how the framework, when viewed through the prism of 'objectives-oriented accounting standards' as recommended by the United States Securities and Exchange Commission (SEC Report in its “Study Pursuant to Section 108(d of the Sarbanes-Oxley Act of 2002 on the Adoption by the United States Financial Reporting System of a Principles-Based Accounting System” (July 2003, encourages professional judgement. We analyze International Financial Reporting Standards (IFRS and Exposure Drafts (ED issued by the IASB since its inception in 2002 to determine if those documents are consistent with objectives-oriented accounting standards. Our analysis is useful for gaining insights into how the IASB integrates the CF with the SEC’s recommended objectives-oriented accounting approach to promote judgement in the interest of IASB/FASB convergence of accounting standards.

Object-Oriented Software Tools for the Construction of Preconditioners

Directory of Open Access Journals (Sweden)

Eva Mossberg

1997-01-01

Full Text Available In recent years, there has been considerable progress concerning preconditioned iterative methods for large and sparse systems of equations arising from the discretization of differential equations. Such methods are particularly attractive in the context of high-performance (parallel computers. However, the implementation of a preconditioner is a nontrivial task. The focus of the present contribution is on a set of object-oriented software tools that support the construction of a family of preconditioners based on fast transforms. By combining objects of different classes, it is possible to conveniently construct any preconditioner within this family.

Tutorial on Using LISP Object-Oriented Programming for Blackboards: Solving the Radar Tracking Problem

Science.gov (United States)

1989-08-01

1977. Pp. 1-229. 25. V. Lesser and R. Fennell. "Parallelism in Aritificial Intelligence Problem Solving: A Case Study of Hearsay II," IEEE Transactions...artificial intelligence architecture used to solve the radar tracking problem. The research described was performed at Purdue University during long...TION 1 COSA TI CODES 18 SUBJECT TERMS in ,,tnu; . ’ .’ , .., ,’ a-, ,’£ ,i-, ,4’o4,, nun br) ,LD I GROUP SUB.GROu P Artificial intelligence Object

Requirements-level semantics and model checking of object-oriented statecharts

NARCIS (Netherlands)

Eshuis, H.; Jansen, D.N.; Wieringa, Roelf J.

2002-01-01

In this paper we define a requirements-level execution semantics for object-oriented statecharts and show how properties of a system specified by these statecharts can be model checked using tool support for model checkers. Our execution semantics is requirements-level because it uses the perfect

Object-oriented programming techniques for the AGS Booster

International Nuclear Information System (INIS)

Skelly, J.F.

1991-01-01

The applications software developed for the control system of the AGS Booster Project was written in the object-oriented language, C++. A the start of the Booster Project, the programming staff of the AGS Controls Section comprised some dozen programmer/analysts, all highly fluent in C but novices in C++. During the coarse of this project, nearly the entire staff converted to using C++ for a large fraction of their assignments. Over 100 C++ software modules are now available for Booster and general AGS use, of which a large fraction are broadly applicable tools. The transition from C to C++ from a managerial perspective is discussed and an overview is provided of the ways in which object classes have been applied in Booster software development

Object-oriented programming techniques for the AGS Booster

International Nuclear Information System (INIS)

Skelly, J.F.

1992-01-01

The applications software developed for the control system of the AGS Booster Project was written in the object-oriented language, C++. At the start of the Booster Project, the programming staff of the AGS Controls Section comprised some dozen programmer/analysts, all highly fluent in C but novices in C++. During the course of this project, nearly the entire staff converted to using C++ for a large fraction of their assignments. Over 100 C++ software modules are now available both for Booster and general AGS use, of which a large fraction are broadly applicable tools. The transition from C to C++ from a managerial perspective is discussed and an overview is provided of the ways in which object classes have been applied in Booster software development. (author)

Object-oriented Approach to High-level Network Monitoring and Management

Science.gov (United States)

Mukkamala, Ravi

2000-01-01

An absolute prerequisite for the management of large investigating methods to build high-level monitoring computer networks is the ability to measure their systems that are built on top of existing monitoring performance. Unless we monitor a system, we cannot tools. Due to the heterogeneous nature of the hope to manage and control its performance. In this underlying systems at NASA Langley Research Center, paper, we describe a network monitoring system that we use an object-oriented approach for the design, we are currently designing and implementing. Keeping, first, we use UML (Unified Modeling Language) to in mind the complexity of the task and the required model users' requirements. Second, we identify the flexibility for future changes, we use an object-oriented existing capabilities of the underlying monitoring design methodology. The system is built using the system. Third, we try to map the former with the latter. APIs offered by the HP OpenView system.

Sexual Orientation and Spatial Position Effects on Selective Forms of Object Location Memory

Science.gov (United States)

Rahman, Qazi; Newland, Cherie; Smyth, Beatrice Mary

2011-01-01

Prior research has demonstrated robust sex and sexual orientation-related differences in object location memory in humans. Here we show that this sexual variation may depend on the spatial position of target objects and the task-specific nature of the spatial array. We tested the recovery of object locations in three object arrays (object…

Implementing interactive computing in an object-oriented environment

Directory of Open Access Journals (Sweden)

Frederic Udina

2000-04-01

Full Text Available Statistical computing when input/output is driven by a Graphical User Interface is considered. A proposal is made for automatic control of computational flow to ensure that only strictly required computations are actually carried on. The computational flow is modeled by a directed graph for implementation in any object-oriented programming language with symbolic manipulation capabilities. A complete implementation example is presented to compute and display frequency based piecewise linear density estimators such as histograms or frequency polygons.

Visual Debugging of Object-Oriented Systems With the Unified Modeling Language

National Research Council Canada - National Science Library

Fox, Wendell

2004-01-01

.... Debugging and analysis tools are required to aid in this process. Debugging of large object-oriented systems is a difficult cognitive process that requires understanding of both the overall and detailed behavior of the application...

Supporting an Object-Oriented Approach to Unit Generator Development: The Csound Plugin Opcode Framework

Directory of Open Access Journals (Sweden)

Victor Lazzarini

2017-09-01

Full Text Available This article presents a new framework for unit generator development for Csound, supporting a full object-oriented programming approach. It introduces the concept of unit generators and opcodes, and its centrality with regards to music programming languages in general, and Csound in specific. The layout of an opcode from the perspective of the Csound C-language API is presented, with some outline code examples. This is followed by a discussion which places the unit generator within the object-oriented paradigm and the motivation for a full C++ programming support, which is provided by the Csound Plugin Opcode Framework (CPOF. The design of CPOF is then explored in detail, supported by several opcode examples. The article concludes by discussing two key applications of object-orientation and their respective instances in the Csound code base.

Object-Oriented Parallel Particle-in-Cell Code for Beam Dynamics Simulation in Linear Accelerators

International Nuclear Information System (INIS)

Qiang, J.; Ryne, R.D.; Habib, S.; Decky, V.

1999-01-01

In this paper, we present an object-oriented three-dimensional parallel particle-in-cell code for beam dynamics simulation in linear accelerators. A two-dimensional parallel domain decomposition approach is employed within a message passing programming paradigm along with a dynamic load balancing. Implementing object-oriented software design provides the code with better maintainability, reusability, and extensibility compared with conventional structure based code. This also helps to encapsulate the details of communications syntax. Performance tests on SGI/Cray T3E-900 and SGI Origin 2000 machines show good scalability of the object-oriented code. Some important features of this code also include employing symplectic integration with linear maps of external focusing elements and using z as the independent variable, typical in accelerators. A successful application was done to simulate beam transport through three superconducting sections in the APT linac design

Holistic Approach to Learning and Teaching Introductory Object-Oriented Programming

Science.gov (United States)

Thota, Neena; Whitfield, Richard

2010-01-01

This article describes a holistic approach to designing an introductory, object-oriented programming course. The design is grounded in constructivism and pedagogy of phenomenography. We use constructive alignment as the framework to align assessments, learning, and teaching with planned learning outcomes. We plan learning and teaching activities,…

Embodied memory allows accurate and stable perception of hidden objects despite orientation change.

Science.gov (United States)

Pan, Jing Samantha; Bingham, Ned; Bingham, Geoffrey P

2017-07-01

Rotating a scene in a frontoparallel plane (rolling) yields a change in orientation of constituent images. When using only information provided by static images to perceive a scene after orientation change, identification performance typically decreases (Rock & Heimer, 1957). However, rolling generates optic flow information that relates the discrete, static images (before and after the change) and forms an embodied memory that aids recognition. The embodied memory hypothesis predicts that upon detecting a continuous spatial transformation of image structure, or in other words, seeing the continuous rolling process and objects undergoing rolling observers should accurately perceive objects during and after motion. Thus, in this case, orientation change should not affect performance. We tested this hypothesis in three experiments and found that (a) using combined optic flow and image structure, participants identified locations of previously perceived but currently occluded targets with great accuracy and stability (Experiment 1); (b) using combined optic flow and image structure information, participants identified hidden targets equally well with or without 30° orientation changes (Experiment 2); and (c) when the rolling was unseen, identification of hidden targets after orientation change became worse (Experiment 3). Furthermore, when rolling was unseen, although target identification was better when participants were told about the orientation change than when they were not told, performance was still worse than when there was no orientation change. Therefore, combined optic flow and image structure information, not mere knowledge about the rolling, enables accurate and stable perception despite orientation change. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

OoTran, an object-oriented program for charged-particle beam transport design

International Nuclear Information System (INIS)

Ninane, A.; Ferte, J.M.; Mareschal, P.; Sibomana, M.; Somers, F.

1990-01-01

The OoTran program is a new object-oriented program for charged-particle beam transport computation. Using a simple menu interface, the user builds his beam line with magnetic and electric elements taken from a standard library. The program computes the beam transport using a well-known first-order matrix formalism and displays 'in real time' the computed beam envelope. The menu editor provides functions to interactively modify the beam line. Ootran is written in C++ and uses two object libraries: OOPS, the Object-Oriented Program Support Class Library, which is a collection of classes similar to those of Smalltalk-80; and InterViews, a C++ graphical-interface toolkit based on the X-Window system. OoTran is running on DECstation 3100, VAXstation 2000 and SUN 3, with the ULTRIX and SUN OS operating systems. (orig.)

Static and Dynamic Coupling and Cohesion Measures in Object Oriented Programming

OpenAIRE

Vasudha Dixit, Dr. Rajeev Vishwkarma

2013-01-01

A large numbers of metrics have been proposed for measuring properties of object-oriented software such as size, inheritance, cohesion and coupling. The coupling metrics presented in this paper exploring the difference between inheritance and interface programming. This paper presents a measurement to measure coupling between object (CBO), number of associations between classes (NASSocC), number of dependencies in metric (NDepIN) and number of dependenciesout m...

Taking an object-oriented view of accelerators

International Nuclear Information System (INIS)

Nishimura, H.

1995-01-01

It was almost a decade ago that accelerator experts were introduced to the concept of object-oriented programming. This new methodology was expected to play a key role in solving various software problems. Today, there seems be nothing that prevents us from taking advantage of this new technology. In fact, we are often forced to catch up with the computer industry's new standards. This is especially true for graphics programming. While evaluating the benefits of using this new technology, we must also evaluate whether it is as effective as it was claimed. In this paper, we discuss these issues based on experiences at the Advanced Light Source

Influence of artificial lights on the orientation of hatchlings of Eretmochelys imbricata in Pernambuco, Brazil

Directory of Open Access Journals (Sweden)

Thyara Noely Simões

2017-10-01

Full Text Available ABSTRACT Sea turtle hatchlings, in natural abiotic conditions, emerge from their nests at night and go directly to the sea, following the moonlight’s reflection in the ocean. Increased human activities such as tourism and artificial lights on the coasts, however, have interfered with the ability of sea turtle neonates to find their correct destination, negatively affecting their survival rates. Here we endeavored to assess the influence of artificial lights on the hatchlings of the sea turtle Eretmochelys imbricata (Linnaeus, 1766 in the south coast of the state of Pernambuco, Brazil. To that end, 10 experiments were conducted with 15 hatchlings/test subjects. Five experiments took place in artificially illuminated areas and five in non-illuminated areas. Circles with a 2 m radius were drawn on the sand a small 2-3 cm depression was made at the center of each circles. The neonates were then placed in the depressions to simulate their coming from a nest. After the neonates crossed the edge of the circles, their tracks were photographed and drawn on a diagram. To ascertain if the trajectories of the neonates differed between the two groups (hatchlings from illuminated versus non-illuminated nests, the Rayleigh test was used. The significance of those differences was tested using ANOVA. To evaluate similarities and significance of clusters, a Multi-Dimensional Scaling was used. The tracks of 86.67% (N = 65 of the hatchlings from nests at illuminated areas departed from their correct trajectory. The distribution of trajectories was considered random (V = 19.4895, p > 0.05 only for tracks originating from artificially illuminated areas. The movement patterns of hatchlings from illuminated and non-illuminated areas differed significantly (F < 0.0001, p < 0.01. Consistent with this, two distinct groups were identified, one from illuminated and one from non-illuminated areas. Therefore, we conclude that artificial illumination impacts the orientation

The handbook of artificial intelligence

CERN Document Server

Barr, Avron

1982-01-01

The Handbook of Artificial Intelligence, Volume II focuses on the improvements in artificial intelligence (AI) and its increasing applications, including programming languages, intelligent CAI systems, and the employment of AI in medicine, science, and education. The book first elaborates on programming languages for AI research and applications-oriented AI research. Discussions cover scientific applications, teiresias, applications in chemistry, dependencies and assumptions, AI programming-language features, and LISP. The manuscript then examines applications-oriented AI research in medicine

The OCoN approach to workflow modeling in object-oriented systems

NARCIS (Netherlands)

Wirtz, G.; Weske, M.H.; Giese, H.

2001-01-01

Workflow management aims at modeling and executing application processes in complex technical and organizational environments. Modern information systems are often based on object-oriented design techniques, for instance, the Unified Modeling Language (UML). These systems consist of application

An UML Statechart Diagram-Based MM-Path Generation Approach for Object-Oriented Integration Testing

OpenAIRE

Ruilian Zhao; Ling Lin

2008-01-01

MM-Path, an acronym for Method/Message Path, describes the dynamic interactions between methods in object-oriented systems. This paper discusses the classifications of MM-Path, based on the characteristics of object-oriented software. We categorize it according to the generation reasons, the effect scope and the composition of MM-Path. A formalized representation of MM-Path is also proposed, which has considered the influence of state on response method sequences of messages. .Moreover, an au...

Using Object-Orientation as a Common Basis for System Development Education

DEFF Research Database (Denmark)

Madsen, Ole Lehrmann; Knudsen, Jørgen Lindskov

1996-01-01

development method where they make a number of iterations through analysis, design and implementation. To do these iterations, it is necessary with good development tools like a CASE tool that supports code generation and reverse engineering. The Mjølner BETA System is used in the various courses as a common...... areas to be taught. Besides providing a common conceptual framework, it also makes it possible to use common languages and tools that have a profound influence on the integration. Especially in the software engineering course, it has been possible to let the students experience an iterative software...... platform, but the students are also introduced to other object-oriented environments like Smalltalk, Self, Eiffel, and C++. The Mjølner BETA System that is a software development environment for object-oriented development based on the BETA programming language....

Advanced software development workstation. Comparison of two object-oriented development methodologies

Science.gov (United States)

Izygon, Michel E.

1992-01-01

This report is an attempt to clarify some of the concerns raised about the OMT method, specifically that OMT is weaker than the Booch method in a few key areas. This interim report specifically addresses the following issues: (1) is OMT object-oriented or only data-driven?; (2) can OMT be used as a front-end to implementation in C++?; (3) the inheritance concept in OMT is in contradiction with the 'pure and real' inheritance concept found in object-oriented (OO) design; (4) low support for software life-cycle issues, for project and risk management; (5) uselessness of functional modeling for the ROSE project; and (6) problems with event-driven and simulation systems. The conclusion of this report is that both Booch's method and Rumbaugh's method are good OO methods, each with strengths and weaknesses in different areas of the development process.

Object-oriented approach to preequilibrium and equilibrium decays in Geant4

International Nuclear Information System (INIS)

Lara, V.

2001-01-01

The Geant4 simulation toolkit provides a set of parameterized models that allow to model hadronic showers. However, in order to allow extrapolation beyond the experimental data and to offer an alternative set of models at conventional energies, Geant4 also provides a set of theory based hadronic shower models. We present the Object Oriented Design of a semiclassical exciton model for preequilibrium decays and a set of statistical models for deexcitation of compound nuclei. Our design follows the philosophy of hadronic models in Geant4, allowing for maximum of extendibility and customizability of the underlying physics by means of the use of abstract interfaces. We exploit advanced Software Engineering techniques and Object Oriented technology to achieve those goals. We present also a series of comparisons against experimental data being made in order to test the model. (orig.)

An object-oriented computational model to study cardiopulmonary hemodynamic interactions in humans.

Science.gov (United States)

Ngo, Chuong; Dahlmanns, Stephan; Vollmer, Thomas; Misgeld, Berno; Leonhardt, Steffen

2018-06-01

This work introduces an object-oriented computational model to study cardiopulmonary interactions in humans. Modeling was performed in object-oriented programing language Matlab Simscape, where model components are connected with each other through physical connections. Constitutive and phenomenological equations of model elements are implemented based on their non-linear pressure-volume or pressure-flow relationship. The model includes more than 30 physiological compartments, which belong either to the cardiovascular or respiratory system. The model considers non-linear behaviors of veins, pulmonary capillaries, collapsible airways, alveoli, and the chest wall. Model parameters were derisved based on literature values. Model validation was performed by comparing simulation results with clinical and animal data reported in literature. The model is able to provide quantitative values of alveolar, pleural, interstitial, aortic and ventricular pressures, as well as heart and lung volumes during spontaneous breathing and mechanical ventilation. Results of baseline simulation demonstrate the consistency of the assigned parameters. Simulation results during mechanical ventilation with PEEP trials can be directly compared with animal and clinical data given in literature. Object-oriented programming languages can be used to model interconnected systems including model non-linearities. The model provides a useful tool to investigate cardiopulmonary activity during spontaneous breathing and mechanical ventilation. Copyright © 2018 Elsevier B.V. All rights reserved.

Determining characteristics of artificial near-Earth objects using observability analysis

Science.gov (United States)

Friedman, Alex M.; Frueh, Carolin

2018-03-01

Observability analysis is a method for determining whether a chosen state of a system can be determined from the output or measurements. Knowledge of state information availability resulting from observability analysis leads to improved sensor tasking for observation of orbital debris and better control of active spacecraft. This research performs numerical observability analysis of artificial near-Earth objects. Analysis of linearization methods and state transition matrices is performed to determine the viability of applying linear observability methods to the nonlinear orbit problem. Furthermore, pre-whitening is implemented to reformulate classical observability analysis. In addition, the state in observability analysis is typically composed of position and velocity; however, including object characteristics beyond position and velocity can be crucial for precise orbit propagation. For example, solar radiation pressure has a significant impact on the orbit of high area-to-mass ratio objects in geosynchronous orbit. Therefore, determining the time required for solar radiation pressure parameters to become observable is important for understanding debris objects. In order to compare observability analysis results with and without measurement noise and an extended state, quantitative measures of observability are investigated and implemented.

BlueJ Visual Debugger for Learning the Execution of Object-Oriented Programs?

Science.gov (United States)

Bennedsen, Jens; Schulte, Carsten

2010-01-01

This article reports on an experiment undertaken in order to evaluate the effect of a program visualization tool for helping students to better understand the dynamics of object-oriented programs. The concrete tool used was BlueJ's debugger and object inspector. The study was done as a control-group experiment in an introductory programming…

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

Science.gov (United States)

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

Combined object-oriented approach for development of process control systems

International Nuclear Information System (INIS)

Antonova, I.; Batchkova, I.

2013-01-01

Full text: The traditional approaches for development of software control system in automation an information technology based on a directly code creation are no longer effective and successful enough. The response to these challenges is the Model Driven Engineering (MDE) or its counter part in the field of architectures Model Driven Architecture (MDA). One of the most promising approach supporting MDE and MDA is UML. It does not specify a methodology for software or system design but aims to provide an integrated modeling framework for structural, functional and behavior descriptions. The success of UML in many object-oriented approaches led to an idea of applying UML to design of multi agent systems. The approach proposed in this paper applies modified Harmony methodology and is based on the combined use of UML profile for system engineering, IEC61499 standard and FIPA standard protocols. The benefits of object-oriented paradigm and the models of IEC61499 standard are extended with UML/SysML and FIPA notations. The development phases are illustrated with the UML models of a simple process control system. The main benefits of using the proposed approach can be summarized as: it provides consistency in the syntax and underlying semantics; increases the potential and likelihood of reuse; supports the whole software development life cycle in the field of process control. Including the SysML features, based on extended activity and parametric diagrams, flow ports and items to the proposed approach opens the possibilities for modeling of continuous system and support the development in field of process control. Another advantage, connected to the UML/MARTE profile is the possibility for analysis of the designed system and detailed design of the hardware and software platform of the modeled application. Key words: object-oriented modeling, control system, UML, SysML, IEC 61499

Network Structures in a Society Composed of Individuals with Utilities DependingStudy of Object-Oriented Model for the Knowledge Base System

OpenAIRE

Mingwei, Zhao; Yanzhong, Dang

2005-01-01

Based on the analysis of object-oriented model, knowledge base and knowledge base system by using theories on object-oriented and knowledge base, the relationships between object-oriented model and knowledge base are discussed in this paper. The architecture of object-oriented knowledge system is proposed and the Rule-Case-Based Reasoning knowledge base system is designed.

An Object-Oriented Architecture for a Web-Based CAI System.

Science.gov (United States)

Nakabayashi, Kiyoshi; Hoshide, Takahide; Seshimo, Hitoshi; Fukuhara, Yoshimi

This paper describes the design and implementation of an object-oriented World Wide Web-based CAI (Computer-Assisted Instruction) system. The goal of the design is to provide a flexible CAI/ITS (Intelligent Tutoring System) framework with full extendibility and reusability, as well as to exploit Web-based software technologies such as JAVA, ASP (a…

Object-Orientation is Evil for Mobile Games: Experience from Industrial Mobile RPGs

DEFF Research Database (Denmark)

Zhang, Weishan; Han, Dong; Kunz, Thomas

2007-01-01

Mobile gaming is playing an important role in the entertainment industry. Good performance is a critical requirement for mobile games in order to achieve acceptable running speed although mobile devices are limited by scarce resources. Object-oriented programming is the prevalent programming....... Therefore if developers are aiming for mobile game performance, we conclude that they should use as few OO features as possible. Structural programming can be a very competitive alternative....... paradigm and this is true for mobile game development as well. As the origin of object-orientation (OO) is not targeting the embedded software domain, there is suspicion as to OO's usability for embedded software, especially with respect to mobile games. Questions arise like how OO and to what degree OO...

An Object-Oriented Approach to Knowledge Representation in a Biomedical Domain

NARCIS (Netherlands)

Ensing, M.; Paton, R.; Speel, P.H.W.M.; Speel, P.H.W.M.; Rada, R.

1994-01-01

An object-oriented approach has been applied to the different stages involved in developing a knowledge base about insulin metabolism. At an early stage the separation of terminological and assertional knowledge was made. The terminological component was developed by medical experts and represented

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

NARCIS (Netherlands)

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is

An object-orientated computer control system for DC motor powered robotics

International Nuclear Information System (INIS)

Barnes, S.A.; Burrows, M.S.; Smith, D.

1993-01-01

In support of the life extension programme for Trawsfynydd Nuclear Power Station, Nuclear Electric plc undertook to carry out volumetric ultrasonic inspection of Reactor Pressure Vessel (RPV) Welds during 1991/92. Access to the Trawsfynydd RPV welds is only practicable from the outside of the vessel and a new generation of remote climbing vehicles, known as MAVIS (Magnetically Attached Vessel Inspection System) was developed to carry out the surface preparation and inspection activities. The purpose of the vehicles is to provide work platforms from which a variety of tasks can be conducted remotely by the fitting of different facilities such as weld location, wire brushing, surface grinding and ultrasonic scanning heads. This paper describes the design, development and implementation of the object oriented control software for the MAVIS vehicles. It further examines the future potential for control systems based upon object oriented philosophies. (author)

Principles of object-oriented modeling and simulation with Modelica 3.3 a cyber-physical approach

CERN Document Server

Fritzson, Peter

2014-01-01

Fritzson covers the Modelica language in impressive depth from the basic concepts such as cyber-physical, equation-base, object-oriented, system, model, and simulation, while also incorporating over a hundred exercises and their solutions for a tutorial, easy-to-read experience. The only book with complete Modelica 3.3 coverage Over one hundred exercises and solutions Examines basic concepts such as cyber-physical, equation-based, object-oriented, system, model, and simulation

Object Oriented Programming Systems (OOPS) and frame representations: An investigation of programming paradigms

Science.gov (United States)

Auty, David

1988-01-01

The project was initiated to research Object Oriented Programming Systems (OOPS) and frame representation systems, their significance and applicability, and their implementation in or relationship to Ada. Object orientated is currently a very popular conceptual adjective. Object oriented programming, in particular, is promoted as a particularly productive approach to programming; an approach which maximizes opportunities for code reuse and lends itself to the definition of convenient and well-developed units. Such units are thus expected to be usable in a variety of situations, beyond the typical highly specific unit development of other approaches. Frame represenation systems share a common heritage and similar conceptual foundations. Together they represent a quickly emerging alternative approach to programming. The approach is to first define the terms, starting with relevant concepts and using these to put bounds on what is meant by OOPS and Frames. From this the possibilities were pursued to merge OOPS with Ada which will further elucidate the significant characteristics which make up this programming approach. Finally, some of the merits and demerits of OOPS were briefly considered as a way of addressing the applicability of OOPS to various programming tasks.

An object-oriented scripting interface to a legacy electronic structure code

DEFF Research Database (Denmark)

Bahn, Sune Rastad; Jacobsen, Karsten Wedel

2002-01-01

The authors have created an object-oriented scripting interface to a mature density functional theory code. The interface gives users a high-level, flexible handle on the code without rewriting the underlying number-crunching code. The authors also discuss design issues and the advantages...

Tool Support for Collaborative Teaching and Learning of Object-Oriented Modelling

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Ratzer, Anne Vinter

2002-01-01

Modeling is central to doing and learning object-oriented development. We present a new tool, Ideogramic UML, for gesture-based collaborative modeling with the Unified Modeling Language (UML), which can be used to collaboratively teach and learn modeling. Furthermore, we discuss how we have...

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

OpenAIRE

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

1999-01-01

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is reviewed.

An object-oriented classification method of high resolution imagery based on improved AdaTree

International Nuclear Information System (INIS)

Xiaohe, Zhang; Liang, Zhai; Jixian, Zhang; Huiyong, Sang

2014-01-01

With the popularity of the application using high spatial resolution remote sensing image, more and more studies paid attention to object-oriented classification on image segmentation as well as automatic classification after image segmentation. This paper proposed a fast method of object-oriented automatic classification. First, edge-based or FNEA-based segmentation was used to identify image objects and the values of most suitable attributes of image objects for classification were calculated. Then a certain number of samples from the image objects were selected as training data for improved AdaTree algorithm to get classification rules. Finally, the image objects could be classified easily using these rules. In the AdaTree, we mainly modified the final hypothesis to get classification rules. In the experiment with WorldView2 image, the result of the method based on AdaTree showed obvious accuracy and efficient improvement compared with the method based on SVM with the kappa coefficient achieving 0.9242

Comparison of multiple linear regression and artificial neural network in developing the objective functions of the orthopaedic screws.

Science.gov (United States)

Hsu, Ching-Chi; Lin, Jinn; Chao, Ching-Kong

2011-12-01

Optimizing the orthopaedic screws can greatly improve their biomechanical performances. However, a methodical design optimization approach requires a long time to search the best design. Thus, the surrogate objective functions of the orthopaedic screws should be accurately developed. To our knowledge, there is no study to evaluate the strengths and limitations of the surrogate methods in developing the objective functions of the orthopaedic screws. Three-dimensional finite element models for both the tibial locking screws and the spinal pedicle screws were constructed and analyzed. Then, the learning data were prepared according to the arrangement of the Taguchi orthogonal array, and the verification data were selected with use of a randomized selection. Finally, the surrogate objective functions were developed by using either the multiple linear regression or the artificial neural network. The applicability and accuracy of those surrogate methods were evaluated and discussed. The multiple linear regression method could successfully construct the objective function of the tibial locking screws, but it failed to develop the objective function of the spinal pedicle screws. The artificial neural network method showed a greater capacity of prediction in developing the objective functions for the tibial locking screws and the spinal pedicle screws than the multiple linear regression method. The artificial neural network method may be a useful option for developing the objective functions of the orthopaedic screws with a greater structural complexity. The surrogate objective functions of the orthopaedic screws could effectively decrease the time and effort required for the design optimization process. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

FEATUREOUS: AN INTEGRATED ENVIRONMENT FOR FEATURE-CENTRIC ANALYSIS AND MODIFICATION OF OBJECT-ORIENTED SOFTWARE

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2011-01-01

The decentralized nature of collaborations between objects in object-oriented software makes it difficult to understand the implementations of user-observable program features and their respective interdependencies. As feature-centric program understanding and modification are essential during...... software maintenance and evolution, this situation needs to change. In this paper, we present Featureous, an integrated development environment built on top of the NetBeans IDE that facilitates feature-centric analysis of object-oriented software. Our integrated development environment encompasses...... a lightweight feature location mechanism, a number of reusable analytical views, and necessary APIs for supporting future extensions. The base of the integrated development environment is a conceptual framework comprising of three complementary dimensions of comprehension: perspective, abstraction...

Analyzing the Implicit Computational Complexity of object-oriented programs

OpenAIRE

Marion , Jean-Yves; Péchoux , Romain

2008-01-01

International audience; A sup-interpretation is a tool which provides upper bounds on the size of the values computed by the function symbols of a program. Sup-interpretations have shown their interest to deal with the complexity of first order functional programs. This paper is an attempt to adapt the framework of sup-interpretations to a fragment of object-oriented programs, including loop and while constructs and methods with side effects. We give a criterion, called brotherly criterion, w...

Feasibility study for objective oriented design of system thermal hydraulic analysis program

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

2008-01-01

The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. In this work, objective oriented program for system safety analysis code has been tried utilizing modernized C language. The analysis, design, implementation and verification steps for OOP system code development are described with some implementation examples. The system code SYSTF based on three-fluid thermal hydraulic solver has been developed by OOP design. The verifications of feasibility are performed with simple fundamental problems and plant models. (author)

Ten years of Object-Oriented analysis on H1

International Nuclear Information System (INIS)

Laycock, Paul

2012-01-01

Over a decade ago, the H1 Collaboration decided to embrace the object-oriented paradigm and completely redesign its data analysis model and data storage format. The event data model, based on the ROOT framework, consists of three layers - tracks and calorimeter clusters, identified particles and finally event summary data - with a singleton class providing unified access. This original solution was then augmented with a fourth layer containing user-defined objects. This contribution will summarise the history of the solutions used, from modifications to the original design, to the evolution of the high-level end-user analysis object framework which is used by H1 today. Several important issues are addressed - the portability of expert knowledge to increase the efficiency of data analysis, the flexibility of the framework to incorporate new analyses, the performance and ease of use, and lessons learned for future projects.

A Systematic Knowledge Management Approach Using Object-Oriented Theory in Customer Complaint Management

Directory of Open Access Journals (Sweden)

Wusheng Zhang

2010-12-01

Full Text Available Research into the effectiveness of customer complaint management has attracted researchers, yet there has been little discussion on customer complaint management in the context of systematic knowledge management approach particularly in the domain of hotel industry. This paper aims to address such gap through the application of object-oriented theory for which the notation of unified modelling language has been adopted for the representation of the concepts, objects, relationships and vocabularies in the domain. The paper used data from forty seven hotel management staff and academics in hospitalitymanagement to investigate lessons learned and best practices in customer complaint management and knowledge management. By providing insights into the potential of a knowledge management approach using object oriented theory, this study advances our understanding on how a knowledge management approach can systematically support the management of hotel customer complaints.

Guest Editor's introduction: Selected papers from the 4th USENIX Conference on Object-Oriented Technologies and Systems

Science.gov (United States)

Sventek, Joe

1998-12-01

Hewlett-Packard Laboratories, 1501 Page Mill Road, Palo Alto, CA 94304, USA Introduction The USENIX Conference on Object-Oriented Technologies and Systems (COOTS) is held annually in the late spring. The conference evolved from a set of C++ workshops that were held under the auspices of USENIX, the first of which met in 1989. Given the growing diverse interest in object-oriented technologies, the C++ focus of the workshop eventually became too narrow, with the result that the scope was widened in 1995 to include object-oriented technologies and systems. COOTS is intended to showcase advanced R&D efforts in object-oriented technologies and software systems. The conference emphasizes experimental research and experience gained by using object-oriented techniques and languages to build complex software systems that meet real-world needs. COOTS solicits papers in the following general areas: application of, and experiences with, object-oriented technologies in particular domains (e.g. financial, medical, telecommunication); the architecture and implementation of distributed object systems (e.g. CORBA, DCOM, RMI); object-oriented programming and specification languages; object-oriented design and analysis. The 4th meeting of COOTS was held 27 - 30 April 1998 at the El Dorado Hotel, Santa Fe, New Mexico, USA. Several tutorials were given. The technical program proper consisted of a single track of six sessions, with three paper presentations per session. A keynote address and a provocative panel session rounded out the technical program. The program committee reviewed 56 papers, selecting the best 18 for presentation in the technical sessions. While we solicit papers across the spectrum of applications of object-oriented technologies, this year there was a predominance of distributed, object-oriented papers. The accepted papers reflected this asymmetry, with 15 papers on distributed objects and 3 papers on object-oriented languages. The papers in this special issue are

DISCO: An object-oriented system for music composition and sound design

Energy Technology Data Exchange (ETDEWEB)

Kaper, H. G.; Tipei, S.; Wright, J. M.

2000-09-05

This paper describes an object-oriented approach to music composition and sound design. The approach unifies the processes of music making and instrument building by using similar logic, objects, and procedures. The composition modules use an abstract representation of musical data, which can be easily mapped onto different synthesis languages or a traditionally notated score. An abstract base class is used to derive classes on different time scales. Objects can be related to act across time scales, as well as across an entire piece, and relationships between similar objects can replicate traditional music operations or introduce new ones. The DISCO (Digital Instrument for Sonification and Composition) system is an open-ended work in progress.

Study to validate the outcome goal, competencies and educational objectives for use in intensive care orientation programs.

Science.gov (United States)

Boyle, M; Butcher, R; Kenney, C

1998-03-01

Intensive care orientation programs have become an accepted component of intensive care education. To date, however, there have been no Australian-based standards defining the appropriate level of competence to be attained upon completion of orientation. The aim of this study was to validate a set of aims, competencies and educational objectives that could form the basis of intensive care orientation and which would ensure an outcome standard of safe and effective practice. An initial document containing a statement of the desired outcome goal, six competency statements and 182 educational objectives was developed through a review of the orientation programs developed by the investigators. The Delphi technique was used to gain consensus among 13 nurses recognised for their expertise in intensive care education. The expert group rated the acceptability of each of the study items and provided suggestions for objectives to be included. An approval rating of 80 per cent was required to retain each of the study items, with the document refined through three Delphi rounds. The final document contains a validated statement of outcome goal, competencies and educational objectives for intensive care orientation programs.

New knowledge in determining the astronomical orientation of Incas object in Ollantaytambo, Peru

Science.gov (United States)

Hanzalová, K.; Klokočník, J.; Kostelecký, J.

2014-06-01

This paper deals about astronomical orientation of Incas objects in Ollantaytambo, which is located about 35 km southeast from Machu Picchu, about 40 km northwest from Cusco, and lies in the Urubamba valley. Everybody writing about Ollantaytambo, shoud read Protzen (1993). He devoted his monograph to description and interpretation of that locality. Book of Salazar and Salazar (2005) deals, among others, with the orientation of objects in Ollantaytambo with respect to the cardinal direction. Zawaski and Malville (2007) documented astronomical context of major monuments of nine sites in Peru, including Ollantaytambo. We tested astronomical orientation in these places and confirm or disprove hypothesis about purpose of Incas objects. For assessment orientation of objects we used our measurements and also satellite images on Google Earth and digital elevation model from ASTER. The satellite images used to approximate estimation of astronomical orientation. The digital elevation model is useful in the mountains, where we need the really horizon for a calculation of sunset and sunrise on specific days (solstices), which were for Incas people very important. By Incas is very famous that they worshiped the Sun. According to him they determined when to plant and when to harvest the crop. In this paper we focused on Temple of the Sun, also known the Wall of six monoliths. We tested which astronomical phenomenon is connected with this Temple. First, we tested winter solstice sunrise and the rides of the Pleiades for the epochs 2000, 1500 and 1000 A.D. According with our results the Temple isn't connected neither with winter solstice sunrise nor with the Pleiades. Then we tested also winter solstice sunset. We tried to use the line from an observation point near ruins of the Temple of Sun, to west-north, in direction to sunset. The astronomical azimuth from this point was about 5° less then we need. From this results we found, that is possible to find another observation

New knowledge in determining the astronomical orientation of Incas object in Ollantaytambo, Peru

Directory of Open Access Journals (Sweden)

K. Hanzalová

2014-06-01

Full Text Available This paper deals about astronomical orientation of Incas objects in Ollantaytambo, which is located about 35 km southeast from Machu Picchu, about 40 km northwest from Cusco, and lies in the Urubamba valley. Everybody writing about Ollantaytambo, shoud read Protzen (1993. He devoted his monograph to description and interpretation of that locality. Book of Salazar and Salazar (2005 deals, among others, with the orientation of objects in Ollantaytambo with respect to the cardinal direction. Zawaski and Malville (2007 documented astronomical context of major monuments of nine sites in Peru, including Ollantaytambo. We tested astronomical orientation in these places and confirm or disprove hypothesis about purpose of Incas objects. For assessment orientation of objects we used our measurements and also satellite images on Google Earth and digital elevation model from ASTER. The satellite images used to approximate estimation of astronomical orientation. The digital elevation model is useful in the mountains, where we need the really horizon for a calculation of sunset and sunrise on specific days (solstices, which were for Incas people very important. By Incas is very famous that they worshiped the Sun. According to him they determined when to plant and when to harvest the crop. In this paper we focused on Temple of the Sun, also known the Wall of six monoliths. We tested which astronomical phenomenon is connected with this Temple. First, we tested winter solstice sunrise and the rides of the Pleiades for the epochs 2000, 1500 and 1000 A.D. According with our results the Temple isn't connected neither with winter solstice sunrise nor with the Pleiades. Then we tested also winter solstice sunset. We tried to use the line from an observation point near ruins of the Temple of Sun, to west-north, in direction to sunset. The astronomical azimuth from this point was about 5° less then we need. From this results we found, that is possible to find another

Microworlds for Learning Object-Oriented Programming: Considerations from Research to Practice

Science.gov (United States)

Djelil, Fahima; Albouy-Kissi, Adelaide; Albouy-Kissi, Benjamin; Sanchez, Eric; Lavest, Jean-Marc

2016-01-01

Object-Oriented paradigm is a common paradigm for introductory programming courses. However, many teachers find that transitioning to teaching this paradigm is a difficult task. To overcome this complexity, many experienced teachers use microworlds to give beginner students an intuitive and rapid understanding of fundamental abstract concepts of…

Proceedings of the 11th European Conference on Object-Oriented Programming

NARCIS (Netherlands)

Unknown, [Unknown; Aksit, Mehmet; Matsuoka, S.

1997-01-01

This book constitutes the strictly refereed proceedings of the 11th European Conference on Object-Oriented Programming, ECOOP'97, held in Jyväskylä, Finland, in June 1997. The book presents 20 revised full papers selected from a total of 103 submissions; also included are two full invited

An object-oriented implementation of a graphical-programming system

International Nuclear Information System (INIS)

Cunningham, G.S.; Hanson, K.M.; Jennings, G.R. Jr.; Wolf, D.R.

1994-01-01

Object-oriented (OO) analysis, design, and programming is a powerful paradigm for creating software that is easily understood, modified, and maintained. In this paper the authors demonstrate how the OO concepts of abstraction, inheritance, encapsulation, polymorphism, and dynamic binding have aided in the design of a graphical-programming tool. The tool that they have developed allows a user to build radiographic system models for computing simulated radiographic data. It will eventually be used to perform Bayesian reconstructions of objects given radiographic data. The models are built by connecting icons that represent physical transformations, such as line integrals, exponentiation, and convolution, on a canvas. They will also briefly discuss ParcPlace's application development environment, VisualWorks, which they have found to be as helpful as the OO paradigm

[Object-oriented remote sensing image classification in epidemiological studies of visceral leishmaniasis in urban areas].

Science.gov (United States)

Almeida, Andréa Sobral de; Werneck, Guilherme Loureiro; Resendes, Ana Paula da Costa

2014-08-01

This study explored the use of object-oriented classification of remote sensing imagery in epidemiological studies of visceral leishmaniasis (VL) in urban areas. To obtain temperature and environmental information, an object-oriented classification approach was applied to Landsat 5 TM scenes from the city of Teresina, Piauí State, Brazil. For 1993-1996, VL incidence rates correlated positively with census tracts covered by dense vegetation, grass/pasture, and bare soil and negatively with areas covered by water and densely populated areas. In 2001-2006, positive correlations were found with dense vegetation, grass/pasture, bare soil, and densely populated areas and negative correlations with occupied urban areas with some vegetation. Land surface temperature correlated negatively with VL incidence in both periods. Object-oriented classification can be useful to characterize landscape features associated with VL in urban areas and to help identify risk areas in order to prioritize interventions.

Probabilistic safety assessment model in consideration of human factors based on object-oriented bayesian networks

International Nuclear Information System (INIS)

Zhou Zhongbao; Zhou Jinglun; Sun Quan

2007-01-01

Effect of Human factors on system safety is increasingly serious, which is often ignored in traditional probabilistic safety assessment methods however. A new probabilistic safety assessment model based on object-oriented Bayesian networks is proposed in this paper. Human factors are integrated into the existed event sequence diagrams. Then the classes of the object-oriented Bayesian networks are constructed which are converted to latent Bayesian networks for inference. Finally, the inference results are integrated into event sequence diagrams for probabilistic safety assessment. The new method is applied to the accident of loss of coolant in a nuclear power plant. the results show that the model is not only applicable to real-time situation assessment, but also applicable to situation assessment based certain amount of information. The modeling complexity is kept down and the new method is appropriate to large complex systems due to the thoughts of object-oriented. (authors)

Semantic-Based Concurrency Control for Object-Oriented Database Systems Supporting Real-Time Applications

National Research Council Canada - National Science Library

Lee, Juhnyoung; Son, Sang H

1994-01-01

.... This paper investigates major issues in designing semantic-based concurrency control for object-oriented database systems supporting real-time applications, and it describes approaches to solving...

On the Construction of Artificial Brains

CERN Document Server

Ramacher, Ulrich

2009-01-01

This book presents a first generation of artificial brains, using vision as sample application. An object recognition system is built, using neurons and synapses as exclusive building elements. The system contains a feature pyramid with 8 orientations and 5 resolution levels for 1000 objects and networks for binding of features into objects. This vision system can recognize objects robustly in the presence of changes in illumination, deformation, distance and pose (as long as object components remain visible). The neuro-synaptic network owes its functional power to the introduction of rapidly modifiable dynamic synapses. These give a network greater pattern recognition capabilities than are achievable with fixed connections. The spatio-temporal correlation structure of patterns is captured by a single synaptic differential equation in a universal way. The correlation can appear as synchronous neural firing, which signals the presence of a feature in a robust way, or binds features into objects. Although in th...

The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

Science.gov (United States)

Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

1993-01-01

Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

Application of artificial intelligence in process control

CERN Document Server

Krijgsman, A

1993-01-01

This book is the result of a united effort of six European universities to create an overall course on the appplication of artificial intelligence (AI) in process control. The book includes an introduction to key areas including; knowledge representation, expert, logic, fuzzy logic, neural network, and object oriented-based approaches in AI. Part two covers the application to control engineering, part three: Real-Time Issues, part four: CAD Systems and Expert Systems, part five: Intelligent Control and part six: Supervisory Control, Monitoring and Optimization.

An Object-Oriented Classification Method on High Resolution Satellite Data

Science.gov (United States)

2004-11-01

25th ACRS 2004 Chiang Mai , Thailand 347 Data Processing B-4.6 AN OBJECT-ORIENTED CLASSIFICATION METHOD ON...unlimited 13. SUPPLEMENTARY NOTES Proceedings of the 25th Asian Conference on Remote Sensing, Held in Chiang Mai , Thailand on 22-26 November 2004...panchromatic (left) and multispectral (right) 25th ACRS 2004 Chiang Mai , Thailand 349 Data Processing B-4.6 First of all, the

Comparative performance measures of relational and object-oriented databases using High Energy Physics data

International Nuclear Information System (INIS)

Marstaller, J.

1993-12-01

The major experiments at the SSC are expected to produce up to 1 Petabyte of data per year. The use of database techniques can significantly reduce the time it takes to access data. The goal of this project was to test which underlying data model, the relational or the object-oriented, would be better suited for archival and accessing high energy data. We describe the relational and the object-oriented data model and their implementation in commercial database management systems. To determine scalability we tested both implementations for 10-MB and 100-MB databases using storage and timing criteria

Object-oriented approach for gas turbine engine simulation

Science.gov (United States)

Curlett, Brian P.; Felder, James L.

1995-01-01

An object-oriented gas turbine engine simulation program was developed. This program is a prototype for a more complete, commercial grade engine performance program now being proposed as part of the Numerical Propulsion System Simulator (NPSS). This report discusses architectural issues of this complex software system and the lessons learned from developing the prototype code. The prototype code is a fully functional, general purpose engine simulation program, however, only the component models necessary to model a transient compressor test rig have been written. The production system will be capable of steady state and transient modeling of almost any turbine engine configuration. Chief among the architectural considerations for this code was the framework in which the various software modules will interact. These modules include the equation solver, simulation code, data model, event handler, and user interface. Also documented in this report is the component based design of the simulation module and the inter-component communication paradigm. Object class hierarchies for some of the code modules are given.

Assistance system for nuclear data evaluation in an object-oriented environment

International Nuclear Information System (INIS)

Iwasaki, S.; Odano, N.; Sugiyama, K.

1994-01-01

An object-oriented framework for an assistance system for neutron nuclear data evaluation has been proposed, and an assisting system for theoretical model fitting to the experimental data has been developed. In the model fitting procedure, we employed a method based on the general least-squares technique. Almost all things appearing in the process were easily and naturally modeled by objects in this environment. The objects can also be connected by a set of rules either with other objects, with the existing or newly developed external processes and with data bases. In total twelve sub-processes were supported by each knowledge base. As an example of the fitting procedure the case of 59 Co as the target nuclide is presented. (Author)

An Object-Oriented Information Model for Policy-based Management of Distributed Applications

NARCIS (Netherlands)

Diaz, G.; Gay, V.C.J.; Horlait, E.; Hamza, M.H.

2002-01-01

This paper presents an object-oriented information model to support a policy-based management for distributed multimedia applications. The information base contains application-level information about the users, the applications, and their profile. Our Information model is described in details and

COCOA CMS Object-oriented Code for Optical Alignment

CERN Document Server

Arce, P

2007-01-01

COCOA is a C++ software that is able to reconstruct the positions, angular orientations, and internal optical parameters of any optical system described by a seamless combination of many different types of optical objects. The program also handles the propagation of uncertainties, which makes it very useful to simulate the system in the design phase. The software is currently in use by the different optical alignment systems of CMS and is integrated in the CMS framework so that it can read the geometry description from simple text files or the CMS XML format, and the input and output data from text files, ROOT trees, or an Oracle or MySQL database.

Artificial intelligence techniques for scheduling Space Shuttle missions

Science.gov (United States)

Henke, Andrea L.; Stottler, Richard H.

1994-01-01

Planning and scheduling of NASA Space Shuttle missions is a complex, labor-intensive process requiring the expertise of experienced mission planners. We have developed a planning and scheduling system using combinations of artificial intelligence knowledge representations and planning techniques to capture mission planning knowledge and automate the multi-mission planning process. Our integrated object oriented and rule-based approach reduces planning time by orders of magnitude and provides planners with the flexibility to easily modify planning knowledge and constraints without requiring programming expertise.

An object-oriented implementation of a graphical-programming system

Energy Technology Data Exchange (ETDEWEB)

Cunningham, G.S.; Hanson, K.M.; Jennings, G.R. Jr.; Wolf, D.R.

1994-04-01

Object-oriented (OO) analysis, design, and programming is a powerful paradigm for creating software that is easily understood, modified, and maintained. In this paper the authors demonstrate how the OO concepts of abstraction, inheritance, encapsulation, polymorphism, and dynamic binding have aided in the design of a graphical-programming tool. The tool that they have developed allows a user to build radiographic system models for computing simulated radiographic data. It will eventually be used to perform Bayesian reconstructions of objects given radiographic data. The models are built by connecting icons that represent physical transformations, such as line integrals, exponentiation, and convolution, on a canvas. They will also briefly discuss ParcPlace`s application development environment, VisualWorks, which they have found to be as helpful as the OO paradigm.

AI Reloaded: Objectives, Potentials, and Challenges of the Novel Field of Brain-Like Artificial Intelligence

Directory of Open Access Journals (Sweden)

Rosemarie Velik

2012-11-01

Full Text Available The general objective of Artificial Intelligence (AI is to make machines – particularly computers – do things that require intelligence when done by humans. In the last 60 years, AI has significantly progressed and today forms an important part of industry and technology. However, despite the many successes, fundamental questions concerning the creation of human-level intelligence in machines still remain open and will probably not be answerable when continuing on the current, mainly mathematic-algorithmically-guided path of AI. With the novel discipline of
Brain-Like Artificial Intelligence, one potential way out of this dilemma has been suggested. Brain-Like AI aims at analyzing and deciphering the working mechanisms of the brain and translating this knowledge into implementable AI architectures with the objective to develop in this way more efficient, flexible, and capable technical systems This article aims at giving a review about this young and still heterogeneous and dynamic research field.

An Object-oriented Knowledge Link Model for General Knowledge Management

OpenAIRE

Xiao-hong, CHEN; Bang-chuan, LAI

2005-01-01

The knowledge link is the basic on knowledge share and the indispensable part in knowledge standardization management. In this paper, a object-oriented knowledge link model is proposed for general knowledge management by using objectoriented representation based on knowledge levels system. In the model, knowledge link is divided into general knowledge link and integrated knowledge with corresponding link properties and methods. What’s more, its BNF syntax is described and designed.

Definition of an Object-Oriented Modeling Language for Enterprise Architecture

OpenAIRE

Lê, Lam Son; Wegmann, Alain

2005-01-01

In enterprise architecture, the goal is to integrate business resources and IT resources in order to improve an enterprises competitiveness. In an enterprise architecture project, the development team usually constructs a model that represents the enterprise: the enterprise model. In this paper, we present a modeling language for building such enterprise models. Our enterprise models are hierarchical object-oriented representations of the enterprises. This paper presents the foundations of o...

An object-oriented framework for application development and integration in hydroinformatics

Energy Technology Data Exchange (ETDEWEB)

Alfredsen, Knut Tore

1999-03-01

Computer-based simulation systems are commonly used as tools for planning and management of water resources. The scope of such tools is growing out of the traditional hydrologic/hydraulic modelling, and the need to integrate financial, ecological and other conditions has increased the complexity of the modelling systems. The field of integrating the hydrology and hydraulics with the socio-technical aspects is commonly referred to as hydro informatics. This report describes an object-oriented approach to build a platform for development and integration of modelling systems to form hydro informatics applications. Object-oriented analysis, design and implementation methods have gained momentum over the past decade as the chosen tool in many application areas. The component-based development method offers advantages in the form of a more integrated and real world true modelling process. Thus there is the opportunity to develop robust and reusable components and simplified maintenance and extendibility through a better modularization of the software. In a networked future the object-oriented methods also offer advantages in building distributed systems. Object-orientation has many levels of application in a hydro informatics system, from handling parts like data storage or user interfaces to being the method used for the complete development. Some examples of using object-oriented methods in the development of hydro informatics systems are discussed in this report. The development platform is built as an application framework with a special focus on extensibility and reuse of components. The framework consists of five sub parts: structural components describing the real world entities, computational elements for implementation of process models and linkage to external modelling systems, data handling classes, simulation control units, and a set of utility classes. Extensibility is maintained either through the use of inheritance from abstract classes defining the

An object-oriented, coprocessor-accelerated model for ice sheet simulations

Science.gov (United States)

Seddik, H.; Greve, R.

2013-12-01

Recently, numerous models capable of modeling the thermo-dynamics of ice sheets have been developed within the ice sheet modeling community. Their capabilities have been characterized by a wide range of features with different numerical methods (finite difference or finite element), different implementations of the ice flow mechanics (shallow-ice, higher-order, full Stokes) and different treatments for the basal and coastal areas (basal hydrology, basal sliding, ice shelves). Shallow-ice models (SICOPOLIS, IcIES, PISM, etc) have been widely used for modeling whole ice sheets (Greenland and Antarctica) due to the relatively low computational cost of the shallow-ice approximation but higher order (ISSM, AIF) and full Stokes (Elmer/Ice) models have been recently used to model the Greenland ice sheet. The advance in processor speed and the decrease in cost for accessing large amount of memory and storage have undoubtedly been the driving force in the commoditization of models with higher capabilities, and the popularity of Elmer/Ice (http://elmerice.elmerfem.com) with an active user base is a notable representation of this trend. Elmer/Ice is a full Stokes model built on top of the multi-physics package Elmer (http://www.csc.fi/english/pages/elmer) which provides the full machinery for the complex finite element procedure and is fully parallel (mesh partitioning with OpenMPI communication). Elmer is mainly written in Fortran 90 and targets essentially traditional processors as the code base was not initially written to run on modern coprocessors (yet adding support for the recently introduced x86 based coprocessors is possible). Furthermore, a truly modular and object-oriented implementation is required for quick adaptation to fast evolving capabilities in hardware (Fortran 2003 provides an object-oriented programming model while not being clean and requiring a tricky refactoring of Elmer code). In this work, the object-oriented, coprocessor-accelerated finite element

Benchmarking and performance enhancement framework for multi-staging object-oriented languages

Directory of Open Access Journals (Sweden)

Ahmed H. Yousef

2013-06-01

Full Text Available This paper focuses on verifying the readiness, feasibility, generality and usefulness of multi-staging programming in software applications. We present a benchmark designed to evaluate the performance gain of different multi-staging programming (MSP languages implementations of object oriented languages. The benchmarks in this suite cover different tests that range from classic simple examples (like matrix algebra to advanced examples (like encryption and image processing. The benchmark is applied to compare the performance gain of two different MSP implementations (Mint and Metaphor that are built on object oriented languages (Java and C# respectively. The results concerning the application of this benchmark on these languages are presented and analysed. The measurement technique used in benchmarking leads to the development of a language independent performance enhancement framework that allows the programmer to select which code segments need staging. The framework also enables the programmer to verify the effectiveness of staging on the application performance. The framework is applied to a real case study. The case study results showed the effectiveness of the framework to achieve significant performance enhancement.

Verifying object-oriented programs with higher-order separation logic in Coq

DEFF Research Database (Denmark)

Bengtson, Jesper; Jensen, Jonas Braband; Sieczkowski, Filip

2011-01-01

We present a shallow Coq embedding of a higher-order separation logic with nested triples for an object-oriented programming language. Moreover, we develop novel specification and proof patterns for reasoning in higher-order separation logic with nested triples about programs that use interfaces...... and interface inheritance. In particular, we show how to use the higher-order features of the Coq formalisation to specify and reason modularly about programs that (1) depend on some unknown code satisfying a specification or that (2) return objects conforming to a certain specification. All of our results have...

An X window based graphics user interface for radiation information processing system developed with object-oriented programming technology

International Nuclear Information System (INIS)

Gao Wenhuan; Fu Changqing; Kang Kejun

1993-01-01

X Window is a network-oriented and network transparent windowing system, and now dominant in the Unix domain. The object-oriented programming technology can be used to change the extensibility of a software system remarkably. An introduction to graphics user interface is given. And how to develop a graphics user interface for radiation information processing system with object-oriented programming technology, which is based on X Window and independent of application is described briefly

An object-oriented class design for the generalized finite element method programming

Directory of Open Access Journals (Sweden)

Dorival Piedade Neto

Full Text Available The Generalized Finite Element Method (GFEM is a numerical method based on the Finite Element Method (FEM, presenting as its main feature the possibility of improving the solution by means of local enrichment functions. In spite of its advantages, the method demands a complex data structure, which can be especially benefited by the Object-Oriented Programming (OOP. Even though the OOP for the traditional FEM has been extensively described in the technical literature, specific design issues related to the GFEM are yet little discussed and not clearly defined. In the present article it is described an Object-Oriented (OO class design for the GFEM, aiming to achieve a computational code that presents a flexible class structure, circumventing the difficulties associated to the method characteristics. The proposed design is evaluated by means of some numerical examples, computed using a code implemented in Python programming language.

[An object-oriented intelligent engineering design approach for lake pollution control].

Science.gov (United States)

Zou, Rui; Zhou, Jing; Liu, Yong; Zhu, Xiang; Zhao, Lei; Yang, Ping-Jian; Guo, Huai-Cheng

2013-03-01

Regarding the shortage and deficiency of traditional lake pollution control engineering techniques, a new lake pollution control engineering approach was proposed in this study, based on object-oriented intelligent design (OOID) from the perspective of intelligence. It can provide a new methodology and framework for effectively controlling lake pollution and improving water quality. The differences between the traditional engineering techniques and the OOID approach were compared. The key points for OOID were described as object perspective, cause and effect foundation, set points into surface, and temporal and spatial optimization. The blue algae control in lake was taken as an example in this study. The effect of algae control and water quality improvement were analyzed in details from the perspective of object-oriented intelligent design based on two engineering techniques (vertical hydrodynamic mixer and pumping algaecide recharge). The modeling results showed that the traditional engineering design paradigm cannot provide scientific and effective guidance for engineering design and decision-making regarding lake pollution. Intelligent design approach is based on the object perspective and quantitative causal analysis in this case. This approach identified that the efficiency of mixers was much higher than pumps in achieving the goal of low to moderate water quality improvement. However, when the objective of water quality exceeded a certain value (such as the control objective of peak Chla concentration exceeded 100 microg x L(-1) in this experimental water), the mixer cannot achieve this goal. The pump technique can achieve the goal but with higher cost. The efficiency of combining the two techniques was higher than using one of the two techniques alone. Moreover, the quantitative scale control of the two engineering techniques has a significant impact on the actual project benefits and costs.

An Exploration and Analysis of the Relationships among Object Oriented Programming, Hypermedia, and Hypertalk.

Science.gov (United States)

Milet, Lynn K.; Harvey, Francis A.

Hypermedia and object oriented programming systems (OOPs) represent examples of "open" computer environments that allow the user access to parts of the code or operating system. Both systems share fundamental intellectual concepts (objects, messages, methods, classes, and inheritance), so that an understanding of hypermedia can help in…

Dynamic Object Oriented Requirements System (DOORS) System Test Plan

International Nuclear Information System (INIS)

JOHNSON, A.L.

2000-01-01

The U. S. Department of Energy, Office of River Protection (ORP) will use the Dynamic Object Oriented Requirements System (DOORS) as a tool to assist in identifying, capturing, and maintaining the necessary and sufficient set of requirements for accomplishing the ORP mission. By managing requirements as one integrated set, the ORP will be able to carry out its mission more efficiently and effectively. DOORS is a Commercial-Off-The-Shelf (COTS) requirements management tool. The tool has not been customized for the use of the PIO, at this time

Object-oriented integrated approach for the design of scalable ECG systems.

Science.gov (United States)

Boskovic, Dusanka; Besic, Ingmar; Avdagic, Zikrija

2009-01-01

The paper presents the implementation of Object-Oriented (OO) integrated approaches to the design of scalable Electro-Cardio-Graph (ECG) Systems. The purpose of this methodology is to preserve real-world structure and relations with the aim to minimize the information loss during the process of modeling, especially for Real-Time (RT) systems. We report on a case study of the design that uses the integration of OO and RT methods and the Unified Modeling Language (UML) standard notation. OO methods identify objects in the real-world domain and use them as fundamental building blocks for the software system. The gained experience based on the strongly defined semantics of the object model is discussed and related problems are analyzed.

Analysis of manufacturing based on object oriented discrete event simulation

Directory of Open Access Journals (Sweden)

Eirik Borgen

1990-01-01

Full Text Available This paper describes SIMMEK, a computer-based tool for performing analysis of manufacturing systems, developed at the Production Engineering Laboratory, NTH-SINTEF. Its main use will be in analysis of job shop type of manufacturing. But certain facilities make it suitable for FMS as well as a production line manufacturing. This type of simulation is very useful in analysis of any types of changes that occur in a manufacturing system. These changes may be investments in new machines or equipment, a change in layout, a change in product mix, use of late shifts, etc. The effects these changes have on for instance the throughput, the amount of VIP, the costs or the net profit, can be analysed. And this can be done before the changes are made, and without disturbing the real system. Simulation takes into consideration, unlike other tools for analysis of manufacturing systems, uncertainty in arrival rates, process and operation times, and machine availability. It also shows the interaction effects a job which is late in one machine, has on the remaining machines in its route through the layout. It is these effects that cause every production plan not to be fulfilled completely. SIMMEK is based on discrete event simulation, and the modeling environment is object oriented. The object oriented models are transformed by an object linker into data structures executable by the simulation kernel. The processes of the entity objects, i.e. the products, are broken down to events and put into an event list. The user friendly graphical modeling environment makes it possible for end users to build models in a quick and reliable way, using terms from manufacturing. Various tests and a check of model logic are helpful functions when testing validity of the models. Integration with software packages, with business graphics and statistical functions, is convenient in the result presentation phase.

Artificial intelligence - New tools for aerospace project managers

Science.gov (United States)

Moja, D. C.

1985-01-01

Artificial Intelligence (AI) is currently being used for business-oriented, money-making applications, such as medical diagnosis, computer system configuration, and geological exploration. The present paper has the objective to assess new AI tools and techniques which will be available to assist aerospace managers in the accomplishment of their tasks. A study conducted by Brown and Cheeseman (1983) indicates that AI will be employed in all traditional management areas, taking into account goal setting, decision making, policy formulation, evaluation, planning, budgeting, auditing, personnel management, training, legal affairs, and procurement. Artificial intelligence/expert systems are discussed, giving attention to the three primary areas concerned with intelligent robots, natural language interfaces, and expert systems. Aspects of information retrieval are also considered along with the decision support system, and expert systems for project planning and scheduling.

Partitioning an object-oriented terminology schema.

Science.gov (United States)

Gu, H; Perl, Y; Halper, M; Geller, J; Kuo, F; Cimino, J J

2001-07-01

Controlled medical terminologies are increasingly becoming strategic components of various healthcare enterprises. However, the typical medical terminology can be difficult to exploit due to its extensive size and high density. The schema of a medical terminology offered by an object-oriented representation is a valuable tool in providing an abstract view of the terminology, enhancing comprehensibility and making it more usable. However, schemas themselves can be large and unwieldy. We present a methodology for partitioning a medical terminology schema into manageably sized fragments that promote increased comprehension. Our methodology has a refinement process for the subclass hierarchy of the terminology schema. The methodology is carried out by a medical domain expert in conjunction with a computer. The expert is guided by a set of three modeling rules, which guarantee that the resulting partitioned schema consists of a forest of trees. This makes it easier to understand and consequently use the medical terminology. The application of our methodology to the schema of the Medical Entities Dictionary (MED) is presented.

An object-oriented model for complex bills of materials in process industries

Directory of Open Access Journals (Sweden)

Vegetti M.

2002-01-01

Full Text Available In recent years, many process industries have been forced to drastically increase their product variety and adopt mass customization production strategies. Many of them have found that traditional bill of material (BOM processing systems do not sufficiently support the maintenance of the very large amounts of data (concerned with product structure demanded by these new production policies. Due to the use of BOM technology within the framework of integrated information systems, there is a demand for both (i a new representation of BOMs, able to deal efficiently with product variants and to handle decomposition-based production strategies, and (ii its corresponding BOM information processing system. This paper describes a conceptual representation that integrates elements of semantic relationships with object-oriented concepts to develop a data model for a hybrid bill of materials. The proposed semantic relationships include composed-of, decomposed-into, variant-of, restriction-of, and their corresponding reverse relationships. The conceptual model has been implemented using object-oriented data-based management system (OODBMS technology that allows creation of persistent Java objects. Preliminary tests show a remarkable reduction in the number of relationships when compared with former approaches.

3D object-oriented image analysis in 3D geophysical modelling

DEFF Research Database (Denmark)

Fadel, I.; van der Meijde, M.; Kerle, N.

2015-01-01

Non-uniqueness of satellite gravity interpretation has traditionally been reduced by using a priori information from seismic tomography models. This reduction in the non-uniqueness has been based on velocity-density conversion formulas or user interpretation of the 3D subsurface structures (objects......) based on the seismic tomography models and then forward modelling these objects. However, this form of object-based approach has been done without a standardized methodology on how to extract the subsurface structures from the 3D models. In this research, a 3D object-oriented image analysis (3D OOA......) approach was implemented to extract the 3D subsurface structures from geophysical data. The approach was applied on a 3D shear wave seismic tomography model of the central part of the East African Rift System. Subsequently, the extracted 3D objects from the tomography model were reconstructed in the 3D...

ARCADIA: a system for the integration of angiocardiographic data and images by an object-oriented DBMS.

Science.gov (United States)

Pinciroli, F; Combi, C; Pozzi, G

1995-02-01

Use of data base techniques to store medical records has been going on for more than 40 years. Some aspects still remain unresolved, e.g., the management of textual data and image data within a single system. Object-orientation techniques applied to a database management system (DBMS) allow the definition of suitable data structures (e.g., to store digital images): some facilities allow the use of predefined structures when defining new ones. Currently available object-oriented DBMS, however, still need improvements both in the schema update and in the query facilities. This paper describes a prototype of a medical record that includes some multimedia features, managing both textual and image data. The prototype here described considers data from the medical records of patients subjected to percutaneous transluminal coronary artery angioplasty. We developed it on a Sun workstation with a Unix operating system and ONTOS as an object-oriented DBMS.

Design of a Model Execution Framework: Repetitive Object-Oriented Simulation Environment (ROSE)

Science.gov (United States)

Gray, Justin S.; Briggs, Jeffery L.

2008-01-01

The ROSE framework was designed to facilitate complex system analyses. It completely divorces the model execution process from the model itself. By doing so ROSE frees the modeler to develop a library of standard modeling processes such as Design of Experiments, optimizers, parameter studies, and sensitivity studies which can then be applied to any of their available models. The ROSE framework accomplishes this by means of a well defined API and object structure. Both the API and object structure are presented here with enough detail to implement ROSE in any object-oriented language or modeling tool.

Maintenance of the catalog of artificial objects in space.

Science.gov (United States)

Khutorovskij, Z. N.

1994-01-01

The catalog of artificial objects in space (AOS) is useful for estimating the safety of space flights, for constructing temporal and spatial models of the flux of AOS, for determining when and where dangerous AOS will break up, for tracking inoperative instruments and space stations, for eliminating false alarms that are triggered by observations of AOS in the Ballistic Missile Early Warning System and in the Anti-Missile system, etc. At present, the Space Surveillance System (located in the former USSR) automatically maintains a catalog consisting of more than 5000 AOS with dimensions of at least 10 cm. The orbital parameters are continuously updated from radar tracking data. The author describes the software which is used to process the information. He presents some of the features of the system itself, including the number of objects in various stages of the tracking process, the orbital parameters of AOS which break up, and how the fragments are detected, the accuracy of tracking and predicting the orbits of the AOS, and the accuracy with which we can estimate when and where an AOS will break up. As an example, the author presents the results of determination of the time when the orbiting complex Salyut-7 - Kosmos-1686 will break up, and where it will impact.

An Improved Multi-Objective Artificial Bee Colony Optimization Algorithm with Regulation Operators

Directory of Open Access Journals (Sweden)

Jiuyuan Huo

2017-02-01

Full Text Available To achieve effective and accurate optimization for multi-objective optimization problems, a multi-objective artificial bee colony algorithm with regulation operators (RMOABC inspired by the intelligent foraging behavior of honey bees was proposed in this paper. The proposed algorithm utilizes the Pareto dominance theory and takes advantage of adaptive grid and regulation operator mechanisms. The adaptive grid technique is used to adaptively assess the Pareto front maintained in an external archive and the regulation operator is used to balance the weights of the local search and the global search in the evolution of the algorithm. The performance of RMOABC was evaluated in comparison with other nature inspired algorithms includes NSGA-II and MOEA/D. The experiments results demonstrated that the RMOABC approach has better accuracy and minimal execution time.

FastScatTM: An Object-Oriented Program for Fast Scattering Computation

Directory of Open Access Journals (Sweden)

Lisa Hamilton

1993-01-01

Full Text Available FastScat is a state-of-the-art program for computing electromagnetic scattering and radiation. Its purpose is to support the study of recent algorithmic advancements, such as the fast multipole method, that promise speed-ups of several orders of magnitude over conventional algorithms. The complexity of these algorithms and their associated data structures led us to adopt an object-oriented methodology for FastScat. We discuss the program's design and several lessons learned from its C++ implementation including the appropriate level for object-orientedness in numeric software, maintainability benefits, interfacing to Fortran libraries such as LAPACK, and performance issues.

The application of the unified modeling language in object-oriented analysis of healthcare information systems.

Science.gov (United States)

Aggarwal, Vinod

2002-10-01

This paper concerns itself with the beneficial effects of the Unified Modeling Language (UML), a nonproprietary object modeling standard, in specifying, visualizing, constructing, documenting, and communicating the model of a healthcare information system from the user's perspective. The author outlines the process of object-oriented analysis (OOA) using the UML and illustrates this with healthcare examples to demonstrate the practicality of application of the UML by healthcare personnel to real-world information system problems. The UML will accelerate advanced uses of object-orientation such as reuse technology, resulting in significantly higher software productivity. The UML is also applicable in the context of a component paradigm that promises to enhance the capabilities of healthcare information systems and simplify their management and maintenance.

Applying object-oriented software engineering at the BaBar collaboration

International Nuclear Information System (INIS)

Jacobsen, B.

1997-01-01

The BaBar experiment at SLAC will start taking data in 1999. We are attempting to build its reconstruction software using good software engineering practices, including the use of object-oriented technology. We summarize our experience to date with analysis and design activities, training, CASE and documentation tools, C++ programming practice and similar topics. The emphasis is on the practical issues of simultaneously introducing new techniques to a large collaboration while under a deadline for system delivery. (orig.)

Segmentation and object-oriented classification of wetlands in a karst Florida landscape using multi-season Landsat-7 ETM+ Imagery

Science.gov (United States)

Segmentation and object-oriented processing of single-season and multi-season Landsat-7 ETM+ data was utilized for the classification of wetlands in a 1560 km2 study area of north central Florida. This segmentation and object-oriented classification outperformed the traditional ...

NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

Science.gov (United States)

Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

2000-01-01

The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

The objected oriented programming: application to potential well system

International Nuclear Information System (INIS)

Franco Garcia, A.

1995-01-01

The Objected Oriented Programming is a new methodology which allows us to organize the code in a different way than the structured languages. This article describes the main characteristics of the Language C++, and advantages in physics computing and in building a graphic user interface. The solution of a classical exercise in one-dimensional Quantum Mechanics: to find out the energy levels and the wave functions of a potential well system, allows us to set a class hierarchy, use the concepts of overloading and polymorphism, and read or write data to disk through the input/output streams. (Author) 4 refs

OBJECT-ORIENTED CHANGE DETECTION BASED ON MULTI-SCALE APPROACH

Directory of Open Access Journals (Sweden)

Y. Jia

2016-06-01

Full Text Available The change detection of remote sensing images means analysing the change information quantitatively and recognizing the change types of the surface coverage data in different time phases. With the appearance of high resolution remote sensing image, object-oriented change detection method arises at this historic moment. In this paper, we research multi-scale approach for high resolution images, which includes multi-scale segmentation, multi-scale feature selection and multi-scale classification. Experimental results show that this method has a stronger advantage than the traditional single-scale method of high resolution remote sensing image change detection.

VIMOS Instrument Control Software Design: an Object Oriented Approach

Science.gov (United States)

Brau-Nogué, Sylvie; Lucuix, Christian

2002-12-01

The Franco-Italian VIMOS instrument is a VIsible imaging Multi-Object Spectrograph with outstanding multiplex capabilities, allowing to take spectra of more than 800 objects simultaneously, or integral field spectroscopy mode in a 54x54 arcsec area. VIMOS is being installed at the Nasmyth focus of the third Unit Telescope of the European Southern Observatory Very Large Telescope (VLT) at Mount Paranal in Chile. This paper will describe the analysis, the design and the implementation of the VIMOS Instrument Control System, using UML notation. Our Control group followed an Object Oriented software process while keeping in mind the ESO VLT standard control concepts. At ESO VLT a complete software library is available. Rather than applying waterfall lifecycle, ICS project used iterative development, a lifecycle consisting of several iterations. Each iteration consisted in : capture and evaluate the requirements, visual modeling for analysis and design, implementation, test, and deployment. Depending of the project phases, iterations focused more or less on specific activity. The result is an object model (the design model), including use-case realizations. An implementation view and a deployment view complement this product. An extract of VIMOS ICS UML model will be presented and some implementation, integration and test issues will be discussed.

The orientation dependence of the hydrogen distribution within Mo/V (110) and (001) multilayered artificial superlattices

CERN Document Server

Hjörvarsson, B; Olafsson, S; Karlsson, E B; Birch, J; Sundgren, J E

1997-01-01

We have investigated the hydrogen distribution within multilayered Mo/V (110) and (001) artificial superlattices. The hydrogen concentration, determined by the sup 1 H( sup 1 sup 5 N, alpha gamma) sup 1 sup 2 C nuclear resonance reaction, is found to decrease with decreasing layer thickness. The decrease is attributed to an interface region with reduced hydrogen content. The extension of this interface region is found to be two monolayers in Mo/V (110), compared to the previously reported three monolayers in Mo/V (001) superlattices. In the (110) oriented samples the relative amount of H in the interface region decreases with increasing average H content (H/V (atomicratio) approx. 0.3-0.5). This effect is shown to be related to the orientation of the hydrogen planes with respect to the boundaries implied by the Mo/V interfaces. The hydrogen induced volume change, obtained by conventional theta-2 theta x-ray diffraction (XRD) and reciprocal space mapping, is found to be smaller for the (110) samples than for t...

Object-oriented simulator of the dynamics of Embalse nuclear power plant

International Nuclear Information System (INIS)

Boroni, Gustavo A.; Cuadrado, M.; Clausse, Alejandro

2000-01-01

LUDWIG is an object-oriented simulator of the dynamics of the CANDU Nuclear power plant Embalse Rio Tercero. The tool consists in a numerical plant analyzer by means of a model of the plant dynamics during normal operation, and a graphic environment for configuration and visualization of results. The simulator was validated against plant transients occurred in the plant and recorded in the past. (author)

Introducing micrometer-sized artificial objects into live cells: a method for cell-giant unilamellar vesicle electrofusion.

Directory of Open Access Journals (Sweden)

Akira C Saito

Full Text Available Here, we report a method for introducing large objects of up to a micrometer in diameter into cultured mammalian cells by electrofusion of giant unilamellar vesicles. We prepared GUVs containing various artificial objects using a water-in-oil (w/o emulsion centrifugation method. GUVs and dispersed HeLa cells were exposed to an alternating current (AC field to induce a linear cell-GUV alignment, and then a direct current (DC pulse was applied to facilitate transient electrofusion. With uniformly sized fluorescent beads as size indexes, we successfully and efficiently introduced beads of 1 µm in diameter into living cells along with a plasmid mammalian expression vector. Our electrofusion did not affect cell viability. After the electrofusion, cells proliferated normally until confluence was reached, and the introduced fluorescent beads were inherited during cell division. Analysis by both confocal microscopy and flow cytometry supported these findings. As an alternative approach, we also introduced a designed nanostructure (DNA origami into live cells. The results we report here represent a milestone for designing artificial symbiosis of functionally active objects (such as micro-machines in living cells. Moreover, our technique can be used for drug delivery, tissue engineering, and cell manipulation.

Object Oriented Toolbox for Modelling and Simulation of Dynamical Systems

DEFF Research Database (Denmark)

Poulsen, Mikael Zebbelin; Wagner, Falko Jens; Thomsen, Per Grove

1998-01-01

This paper presents the results of an ongoing project, dealing with design and implementation of a simulation toolbox based on object oriented modelling techniques. The paper describes an experimental implementation of parts of such a toolbox in C++, and discusses the experiences drawn from that ...... that process. Essential to the work is the focus on simulation of complex dynamical systems, from modelling the single components/subsystems to building complete systemssuch a toolbox in C++, and discusses the experiences drawn from that process....

Object-Oriented Hierarchy Radiation Consistency for Different Temporal and Different Sensor Images

Directory of Open Access Journals (Sweden)

Nan Su

2018-02-01

Full Text Available In the paper, we propose a novel object-oriented hierarchy radiation consistency method for dense matching of different temporal and different sensor data in the 3D reconstruction. For different temporal images, our illumination consistency method is proposed to solve both the illumination uniformity for a single image and the relative illumination normalization for image pairs. Especially in the relative illumination normalization step, singular value equalization and linear relationship of the invariant pixels is combined used for the initial global illumination normalization and the object-oriented refined illumination normalization in detail, respectively. For different sensor images, we propose the union group sparse method, which is based on improving the original group sparse model. The different sensor images are set to a similar smoothness level by the same threshold of singular value from the union group matrix. Our method comprehensively considered the influence factors on the dense matching of the different temporal and different sensor stereoscopic image pairs to simultaneously improve the illumination consistency and the smoothness consistency. The radiation consistency experimental results verify the effectiveness and superiority of the proposed method by comparing two other methods. Moreover, in the dense matching experiment of the mixed stereoscopic image pairs, our method has more advantages for objects in the urban area.

A prototype distributed object-oriented architecture for image-based automatic laser alignment

International Nuclear Information System (INIS)

Stout, E.A.; Kamm, V.J.M.; Spann, J.M.; Van Arsdall, P.J.

1996-01-01

Designing a computer control system for the National Ignition Facility (NIF) is a complex undertaking because of the system's large size and its distributed nature. The controls team is addressing that complexity by adopting the object-oriented programming paradigm, designing reusable software frameworks, and using the Common Object Request Broker Architecture (CORBA) for distribution. A prototype system for image-based automatic laser alignment has been developed to evaluate and gain experience with CORBA and OOP in a small distributed system. The prototype is also important in evaluating alignment concepts, image processing techniques, speed and accuracy of automatic alignment objectives for the NIF, and control hardware for aligment devices. The prototype system has met its inital objectives and provides a basis for continued development

Applicability of object-oriented design methods and C++ to safety-critical systems

International Nuclear Information System (INIS)

Cuthill, B.B.

1994-01-01

This paper reports on a study identifying risks and benefits of using a software development methodology containing object-oriented design (OOD) techniques and using C++ as a programming language relative to selected features of safety-critical systems development. These features are modularity, functional diversity, removing ambiguous code, traceability, and real-time performance

Dynamic population artificial bee colony algorithm for multi-objective optimal power flow

Directory of Open Access Journals (Sweden)

Man Ding

2017-03-01

Full Text Available This paper proposes a novel artificial bee colony algorithm with dynamic population (ABC-DP, which synergizes the idea of extended life-cycle evolving model to balance the exploration and exploitation tradeoff. The proposed ABC-DP is a more bee-colony-realistic model that the bee can reproduce and die dynamically throughout the foraging process and population size varies as the algorithm runs. ABC-DP is then used for solving the optimal power flow (OPF problem in power systems that considers the cost, loss, and emission impacts as the objective functions. The 30-bus IEEE test system is presented to illustrate the application of the proposed algorithm. The simulation results, which are also compared to nondominated sorting genetic algorithm II (NSGAII and multi-objective ABC (MOABC, are presented to illustrate the effectiveness and robustness of the proposed method.

Object-oriented versus logical conventional implementation of a MMIIS

Science.gov (United States)

Forte, Anne-Marie; Bernadet, Maurice; Lavaire, Franck; Bizais, Yves J.

1992-06-01

The main components of a multimodality medical image interpretation system (MMIIS) are: (1) a user interface, (2) an image database, storing image objects along with their description, (3) expert systems (ES) in various medical imaging domains and particularly in image processing (IP), and (4) an IP actor, toolbox of standard IP procedures. To implement such a system, we are building two prototypes: one with an object-oriented (OO) expert system and one with a classical logical expert system. In these two different approaches, we have to model the medical imaging objects and represent them. Both approaches use an OO data model even if its implementation is different in: (1) the characteristics of each ES, in managing knowledge and inferences (uncertainty, non-monotonicity, backward and forward chaining, meta- knowledge), (2) the environment to implement the different experts and to activate IP procedures, and (3) the communication means between the experts and the other components. In the OO approach, an ES based on smalltalk is used, and in the conventional one an adhoc Prolog ES was built. Our goal is to compare their advantages and disadvantages in implementing a MMIIS.

Standardization of transportation classes for object-oriented deployment simulations.

Energy Technology Data Exchange (ETDEWEB)

Burke, J. F., Jr.; Howard, D. L.; Jackson, J.; Macal, C. M.; Nevins, M. R.; Van Groningen, C. N.

1999-07-30

Many recent efforts to integrate transportation and deployment simulations, although beneficial, have lacked a feature vital for seamless integration: a common data class representation. It is an objective of the Department of Defense (DoD) to standardize all classes used in object-oriented deployment simulations by developing a standard class attribute representation and behavior for all deployment simulations that rely on an underlying class representation. The Extensive Hierarchy and Object Representation for Transportation Simulations (EXHORT) is a collection of three hierarchies that together will constitute a standard and consistent class attribute representation and behavior that could be used directly by a large set of deployment simulations. The first hierarchy is the Transportation Class Hierarchy (TCH), which describes a significant portion of the defense transportation system; the other two deal with infrastructure and resource classes. EXHORT will allow deployment simulations to use the same set of underlying class data, ensure transparent exchanges, reduce the effort needed to integrate simulations, and permit a detailed analysis of the defense transportation system. This paper describes EXHORT's first hierarchy, the TCH, and provides a rationale for why it is a helpful tool for modeling major portions of the defense transportation system.

Application of object oriented techniques in the TRIUMF beam line 2C control system

International Nuclear Information System (INIS)

Wilkinson, N.A.; Ludgate, G.A.

1992-07-01

The KAON Factory central control system study employed a uniform approach to requirements analysis, architectural design and programming based on well established object oriented principles. These principles were applied to the successful analysis, design and implementation of the control system for the TRIUMF Beam Line 2C Solid Target Facility. The specification for this control system was created in collaboration with Beam Line 2C equipment management experts and, once the analysis models were validated, an approach was developed for the direct translation of these models into C code. A commercial real time database was central to this translation, as inter-object data and control flows are implemented by channels in the database. This paper focuses on the experience gained in the use of object oriented techniques during the complete analysis-design-implementation cycle of a working control system and on the utility of implementing such a system using a commercial real time database and graphical interface. (author)

GOOSE Version 1.4: A powerful object-oriented simulation environment for developing reactor models

International Nuclear Information System (INIS)

Nypaver, D.J.; March-Leuba, C.; Abdalla, M.A.; Guimaraes, L.

1992-01-01

A prototype software package for a fully interactive Generalized Object-Oriented Simulation Environment (GOOSE) is being developed at Oak Ridge National Laboratory. Dynamic models are easily constructed and tested; fully interactive capabilities allow the user to alter model parameters and complexity without recompilation. This environment provides assess to powerful tools such as numerical integration packages, graphical displays, and online help. In GOOSE, portability has been achieved by creating the environment in Objective-C 1 , which is supported by a variety of platforms including UNIX and DOS. GOOSE Version 1.4 introduces new enhancements like the capability of creating ''initial,'' ''dynamic,'' and ''digital'' methods. The object-oriented approach to simulation used in GOOSE combines the concept of modularity with the additional features of allowing precompilation, optimization, testing, and validation of individual modules. Once a library of classes has been defined and compiled, models can be built and modified without recompilation. GOOSE Version 1.4 is primarily command-line driven

An object-oriented forest landscape model and its representation of tree species

Science.gov (United States)

Hong S. He; David J. Mladenoff; Joel Boeder

1999-01-01

LANDIS is a forest landscape model that simulates the interaction of large landscape processes and forest successional dynamics at tree species level. We discuss how object-oriented design (OOD) approaches such as modularity, abstraction and encapsulation are integrated into the design of LANDIS. We show that using OOD approaches, model decisions (olden as model...

RF control at SSCL - an object oriented design approach

International Nuclear Information System (INIS)

Dohan, D.A.; Osberg, E.; Biggs, R.; Bossom, J.; Chillara, K.; Richter, R.; Wade, D.

1994-01-01

The Superconducting Super Collider (SSC) in Texas, the construction of which was stopped in 1994, would have represented a major challenge in accelerator research and development. This paper addresses the issues encountered in the parallel design and construction of the control systems for the RF equipment for the five accelerators comprising the SSC. An extensive analysis of the components of the RF control systems has been undertaken, based upon the Schlaer-Mellor object-oriented analysis and design (OOA/OOD) methodology. The RF subsystem components such as amplifiers, tubes, power supplies, PID loops, etc. were analyzed to produce OOA information, behavior and process models. Using these models, OOD was iteratively applied to develop a generic RF control system design. This paper describes the results of this analysis and the development of 'bridges' between the analysis objects, and the EPICS-based software and underlying VME-based hardware architectures. The application of this approach to several of the SSCL RF control systems is discussed. ((orig.))

An object-oriented implementation of the TRIUMF 92 MHz booster cavity control system

International Nuclear Information System (INIS)

Wilkinson, N.A.; Ludgate, G.A.

1992-01-01

A 92 MHz auxiliary accelerating cavity has been designed for installation inside the TRIUMF cyclotron, operating up to a maximum peak voltage of 200 kV. The cavity doubles the energy gain per turn for accelerating hydrogen ions in the energy region of 400-500 MeV, and reduces by 50% the stripping loss of the ion beam. The control system for the booster comprises a PC-based processor in a VME crate, for local control, and a 68030 processor with an ethernet connection as the interface to the TRIUMF Central Control System. The requirements for the booster control system were established by an object-oriented requirements analysis. Afterward, an object-oriented architectural design step was used to produce the processor allocation of the design, which was then implemented using C, for the VME processor, and a commercial database and screen generator product, for the VAX user interface. (author)

An Evaluation Instrument for Object-Oriented Example Programs for Novices

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Börstler, Jürgen; Nordström,, Marie

objectively and consistently requires some kind of measurement instrument. In this paper, we describe the development and initial validation of an evaluation instrument for example programs, based on three aspects of quality; technical quality, object-oriented quality, and didactical quality. Validation......Examples are important tools for programming education. In this paper, we investigate desirable properties of programming examples from a cognitive and a measurement point of view. We argue that some cognitive aspects of example programs are "caught" by common software measures......, but they are not sufficient to capture all important aspects of understandability. We propose a framework for measuring the understandability of example programs that also considers factors related to the usage context of examples. Research shows that examples play an important role for cognitive skill acquisition. Students...

Designing an object-oriented scheme for accelerator equipment control

International Nuclear Information System (INIS)

Trofimov, N.N.

1994-01-01

The object-oriented analysis (OOA) and design (OOD) formalisms developed by Project Technology Inc. is presented in this report. The method was originated in 1979 with the analysis phase of a large real-time project at Lawrence Berkeley Laboratory and since that time has been used in several large-scale industrial projects. It is supported by the Teamwork CASE package from Cadre Technologies Inc. For introducing basic concepts and definitions of the OOA/OOD, a typical accelerator device example: remotely controllable power supply which is used to power magnets in an accelerator beam transfer line is used through out this report. 18 refs., 18 figs

A Mobile Service Oriented Multiple Object Tracking Augmented Reality Architecture for Education and Learning Experiences

Science.gov (United States)

Rattanarungrot, Sasithorn; White, Martin; Newbury, Paul

2014-01-01

This paper describes the design of our service-oriented architecture to support mobile multiple object tracking augmented reality applications applied to education and learning scenarios. The architecture is composed of a mobile multiple object tracking augmented reality client, a web service framework, and dynamic content providers. Tracking of…

Artificial intelligence, neural network, and Internet tool integration in a pathology workstation to improve information access

Science.gov (United States)

Sargis, J. C.; Gray, W. A.

1999-03-01

The APWS allows user friendly access to several legacy systems which would normally each demand domain expertise for proper utilization. The generalized model, including objects, classes, strategies and patterns is presented. The core components of the APWS are the Microsoft Windows 95 Operating System, Oracle, Oracle Power Objects, Artificial Intelligence tools, a medical hyperlibrary and a web site. The paper includes a discussion of how could be automated by taking advantage of the expert system, object oriented programming and intelligent relational database tools within the APWS.

Artificial intelligence approach to accelerator control systems

International Nuclear Information System (INIS)

Schultz, D.E.; Hurd, J.W.; Brown, S.K.

1987-01-01

An experiment was recently started at LAMPF to evaluate the power and limitations of using artificial intelligence techniques to solve problems in accelerator control and operation. A knowledge base was developed to describe the characteristics and the relationships of the first 30 devices in the LAMPF H+ beam line. Each device was categorized and pertinent attributes for each category defined. Specific values were assigned in the knowledge base to represent each actual device. Relationships between devices are modeled using the artificial intelligence techniques of rules, active values, and object-oriented methods. This symbolic model, built using the Knowledge Engineering Environment (KEE) system, provides a framework for analyzing faults, tutoring trainee operators, and offering suggestions to assist in beam tuning. Based on information provided by the domain expert responsible for tuning this portion of the beam line, additional rules were written to describe how he tunes, how he analyzes what is actually happening, and how he deals with failures. Initial results have shown that artificial intelligence techniques can be a useful adjunct to traditional methods of numerical simulation. Successful and efficient operation of future accelerators may depend on the proper merging of symbolic reasoning and conventional numerical control algorithms

Implementation of object-oriented programming in study of electrical race car

Science.gov (United States)

Nowak, M.; Baier, M.

2016-08-01

The paper covers issue of conducting advanced research of electrical race car participating in international competition called Sileverline Corporate Challenge. Process of designing race cars in Silesian Greenpower team is aided by a professional engine test stand built particularly in purpose of this research. Phase of testing and simulation is an important part of the implementation of new technologies. Properly developed solutions and test procedures are able to significantly shorten development time and reduce design costs. Testing process must be controlled by a modular and flexible application, easy to modify and ensuring safety. This paper describes the concept of object-oriented programming in LabVIEW and exemplary architecture of object-oriented control application designed to control engine test stand of the electrical race car. Eventually, the task of application will be to steer the electromagnetic brake and the engine load torque to perform according to data from the actual race track. During the designing process of the car, minimizing energy losses and maximizing powertrain efficiency are the main aspects taken into consideration. One of the crucial issues to accomplish these goals is to maintain optimal performance of the motor by applying effective cooling. The paper covers the research verifying the effectiveness of the cooling system.

The role of metacognitive skills in solving object-oriented programming problems: a case study

Directory of Open Access Journals (Sweden)

Marietjie Havenga

2015-07-01

Full Text Available This article reports on the role of metacognitive skills when solving object-oriented programming problems as part of a case study. The research was constructivist-based within an interpretivist approach to explore how four students constructed their own thinking when solving programming problems. A qualitative methodology was employed. Both concept-driven coding and data-driven coding were applied. Two main issues emerged from the findings. Participating students had fragmented knowledge of the object-oriented approach and shortcomings regarding the implementation thereof, and they experienced problems with metacognitive control during all the steps of program development. Based on the findings the use of metacognitive critical control points (MCCPs is proposed to be used as a mechanism to facilitate students in their programming efforts and to prevent loss of control during program development.

Modular, object-oriented redesign of a large-scale Monte Carlo neutron transport program

International Nuclear Information System (INIS)

Moskowitz, B.S.

2000-01-01

This paper describes the modular, object-oriented redesign of a large-scale Monte Carlo neutron transport program. This effort represents a complete 'white sheet of paper' rewrite of the code. In this paper, the motivation driving this project, the design objectives for the new version of the program, and the design choices and their consequences will be discussed. The design itself will also be described, including the important subsystems as well as the key classes within those subsystems

On Estimation Of The Orientation Of Mobile Robots Using Turning Functions And SONAR Information

Directory of Open Access Journals (Sweden)

Dorel AIORDACHIOAIE

2003-12-01

Full Text Available SONAR systems are widely used by some artificial objects, e.g. robots, and by animals, e.g. bats, for navigation and pattern recognition. The objective of this paper is to present a solution on the estimation of the orientation in the environment of mobile robots, in the context of navigation, using the turning function approach. The results are shown to be accurate and can be used further in the design of navigation strategies of mobile robots.

A Case Study on Coloured Petri Nets in Object-oriented Analysis and Design

DEFF Research Database (Denmark)

Barros, Joao Paulo; Jørgensen, Jens Bæk

2005-01-01

In this paper, we first demonstrate how a coloured Petri nets (CPN) model can be used to capture requirements for a considered example system, an elevator controller. Then, we show how this requirements-level CPN model is transformed into a design-level object-oriented CPN model, which...

An Achievement Degree Analysis Approach to Identifying Learning Problems in Object-Oriented Programming

Science.gov (United States)

Allinjawi, Arwa A.; Al-Nuaim, Hana A.; Krause, Paul

2014-01-01

Students often face difficulties while learning object-oriented programming (OOP) concepts. Many papers have presented various assessment methods for diagnosing learning problems to improve the teaching of programming in computer science (CS) higher education. The research presented in this article illustrates that although max-min composition is…

Optimizing transformations of stencil operations for parallel object-oriented scientific frameworks on cache-based architectures

Energy Technology Data Exchange (ETDEWEB)

Bassetti, F.; Davis, K.; Quinlan, D.

1998-12-31

High-performance scientific computing relies increasingly on high-level large-scale object-oriented software frameworks to manage both algorithmic complexity and the complexities of parallelism: distributed data management, process management, inter-process communication, and load balancing. This encapsulation of data management, together with the prescribed semantics of a typical fundamental component of such object-oriented frameworks--a parallel or serial array-class library--provides an opportunity for increasingly sophisticated compile-time optimization techniques. This paper describes two optimizing transformations suitable for certain classes of numerical algorithms, one for reducing the cost of inter-processor communication, and one for improving cache utilization; demonstrates and analyzes the resulting performance gains; and indicates how these transformations are being automated.

Objective Oriented Design of System Thermal Hydraulic Analysis Program and Verification of Feasibility

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

2008-01-01

The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. TRACE, RELAP5-3D and MARS codes are examples of these activities. The codes were redesigned to have modular structures utilizing Fortran 90 features. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. It was not commonly used in mainstream software application development until the early 1990s. Many modern programming languages now support OOP. Although the recent Fortran language also support the OOP, it is considered to have limited functions compared to the modern software features. In this work, objective oriented program for system safety analysis code has been tried utilizing modern C language feature. The advantage of OOP has been discussed after verification of design feasibility

From Procedural to Object-Oriented Programming (OOP- Performance in OOP: An empirical study

Directory of Open Access Journals (Sweden)

Irene Govender

2011-02-01

Full Text Available This exploratory study of introductory pre- and in-service teachers’ performance in object-oriented programming (OOP assessments reveals important issues with regard to learning and teaching OOP, using java. The study is set against the backdrop of the country’s transition of its national IT curriculum from a procedural to an object-oriented programming language. The effect of prior programming experience and performances in different types of questions are examined. A combination of quantitative and qualitative methods is used to analyse the data. The effect of prior programming experience of a procedural kind and the type of assessments given is shown to have a marked influence on the performance in programming assessments and teaching of OOP. Many introductory OOP courses are in effect taught procedurally as courses in the small. Therefore educating teachers how to teach programming is a significant educational challenge. Some implications for teaching are therefore suggested

Artificial Mangrove Species Mapping Using Pléiades-1: An Evaluation of Pixel-Based and Object-Based Classifications with Selected Machine Learning Algorithms

Directory of Open Access Journals (Sweden)

Dezhi Wang

2018-02-01

Full Text Available In the dwindling natural mangrove today, mangrove reforestation projects are conducted worldwide to prevent further losses. Due to monoculture and the low survival rate of artificial mangroves, it is necessary to pay attention to mapping and monitoring them dynamically. Remote sensing techniques have been widely used to map mangrove forests due to their capacity for large-scale, accurate, efficient, and repetitive monitoring. This study evaluated the capability of a 0.5-m Pléiades-1 in classifying artificial mangrove species using both pixel-based and object-based classification schemes. For comparison, three machine learning algorithms—decision tree (DT, support vector machine (SVM, and random forest (RF—were used as the classifiers in the pixel-based and object-based classification procedure. The results showed that both the pixel-based and object-based approaches could recognize the major discriminations between the four major artificial mangrove species. However, the object-based method had a better overall accuracy than the pixel-based method on average. For pixel-based image analysis, SVM produced the highest overall accuracy (79.63%; for object-based image analysis, RF could achieve the highest overall accuracy (82.40%, and it was also the best machine learning algorithm for classifying artificial mangroves. The patches produced by object-based image analysis approaches presented a more generalized appearance and could contiguously depict mangrove species communities. When the same machine learning algorithms were compared by McNemar’s test, a statistically significant difference in overall classification accuracy between the pixel-based and object-based classifications only existed in the RF algorithm. Regarding species, monoculture and dominant mangrove species Sonneratia apetala group 1 (SA1 as well as partly mixed and regular shape mangrove species Hibiscus tiliaceus (HT could well be identified. However, for complex and easily

Calculation of deformation rate of interstitial solid solutions under irradiation with usage of the object-oriented approach

International Nuclear Information System (INIS)

Lopuga, A.D.; Pyatiletov, Yu.S.

2000-01-01

The creep rate is determined by streams of self point defects and mobile complexes impurity - free point defect on the dislocation. These streams are by the numerical method, if the stationary distributions of point defects in a neighbourhood of sinks are known. For solution of this composite system of the nonlinear differential equations the object-oriented approach utilized, which one represents series iterative process consisting of four stages: the analysis, designing, evolution and modification. On the basis of the object-oriented approach, the program application DefRate.exe for research of radiation creep rate is created. The application works in an operating system Windows. As all parameters are set interactive, the designed program can be easily utilized for research of the broad set of materials. The introduced object-oriented method is applicable for research of the broad set of processes controlled by the diffusion, such as the swelling and radiation creep of construction materials, the hydrogen permeability etc

Development of a Wrapper Object for MARS TH Systems Code and Its Applications in Object Oriented Programs

International Nuclear Information System (INIS)

Park, Sun Byung; Lee, Young Jin; Kim, Hyong Chol; Han, Sam Hee; Kim, Hyun Jik

2013-01-01

TMARS is written for the object pascal program language, and 'wraps' the Dynamic Link Library (DLL) manifestation of the MARS-KS code written in Fortran 90. TMARS behaves as a true object and it can be instantiated, inherited, and its methods overloaded. The functionality of TMARS was verified and demonstrated using two programs built under object oriented program environment. One is a text based program for reviewing the data interface of TMARS, and the other is a graphic intensive prototype NPA program for testing the overall performance of TMARS. The prototype NPA was also used to assess the real-time capability of TMARS. The demonstration programs show that application of TMARS is straight forward and that its functions facilitate easy application developments. TMARS, a wrapper object class encapsulating the calculation functions of MARS-KS code, was successfully developed and verification of its functionality was carried out using custom made programs. The verification results show that TMARS is capable of providing reliable TH calculation results and sufficient performance to realize real time calculations

Conceptual Design of Object Oriented Program (OOP) for Pilot Code of Two-Fluid, Three-field Model with C++ 6.0

International Nuclear Information System (INIS)

Chung, Bub Dong; Lee, Young Jin

2006-01-01

Engineering software for design purpose in nuclear industries have been developed since early 1970s, and well established in 1980s. The most popular and common language for the software development has been FORTRAN series, until the more sophisticated GUI and software coupling is needed. The advanced computer language, such as C++, C has been developed to help the programming for the easy GUI need and reuse of well developed routines, with adopting the objective oriented program. A recent trend of programming becomes objective-oriented since the results are often more intuitive and easier to maintain than procedure program. The main motivation of this work is to capture objective oriented concepts for conventional safety analysis programs which consist of many functions and procedure oriented structures. In this work, the new objective programming with C++ 6.0 language has been tried for the PILOT code written in FORTRAN language, and conceptual OOP design of the system safety analysis code has been done

The 7th Workshop for PhD Students in Object-Oriented Systems

DEFF Research Database (Denmark)

1997-01-01

the communication and cooperation between them. In a year of the PhDOOS network the workshop is the main event where we meet face-to-face. Between workshops we stay in touch through our mailing list. More information on the PhDOOS network can be found at http://purl.org/net/PhDOOS.......It is a tradition at ECOOP conferences to have a workshop for PhD students, conducted by the network of PhD Students in Object-Oriented Systems (PhDOOS). The purpose of this network is to help leveraging the collective resources of young researchers in the object community by improving...

A class Hierarchical, object-oriented approach to virtual memory management

Science.gov (United States)

Russo, Vincent F.; Campbell, Roy H.; Johnston, Gary M.

1989-01-01

The Choices family of operating systems exploits class hierarchies and object-oriented programming to facilitate the construction of customized operating systems for shared memory and networked multiprocessors. The software is being used in the Tapestry laboratory to study the performance of algorithms, mechanisms, and policies for parallel systems. Described here are the architectural design and class hierarchy of the Choices virtual memory management system. The software and hardware mechanisms and policies of a virtual memory system implement a memory hierarchy that exploits the trade-off between response times and storage capacities. In Choices, the notion of a memory hierarchy is captured by abstract classes. Concrete subclasses of those abstractions implement a virtual address space, segmentation, paging, physical memory management, secondary storage, and remote (that is, networked) storage. Captured in the notion of a memory hierarchy are classes that represent memory objects. These classes provide a storage mechanism that contains encapsulated data and have methods to read or write the memory object. Each of these classes provides specializations to represent the memory hierarchy.

Development of a Wrapper Object, TRelap, for RELAP5 Code for Use in Object Oriented Programs

International Nuclear Information System (INIS)

Lee, Young Jin

2008-01-01

TRelap object class has been developed to enable object oriented programming techniques to be used where functionality of the RELAP5 thermal hydraulic system analysis code is needed. The TRelap is an object front for Dynamic Link Library (DLL) manifestation of the Relap5 code, Relap5.dll. In making the Relap5.dll, the top most structure of the RELAP5 was altered to enable the external calling procedures to control and the access the memory. The alteration was performed in such a way to allow the entire 'fa' and the f tb' memory spaces to be accessible to the calling procedure. Thus, any variable contained within the 'fa' array such as the parameters for the components, volumes, junctions, and heat structures can be accessed by the external calling procedure through TRelap. Various methods and properties to control the RELAP5 calculation and to access and manipulate the variables are built into the TRelap to enable easy manipulation. As a verification effort, a simple program was written to demonstrate the capability of the TRelap

Object-oriented crop mapping and monitoring using multi-temporal polarimetric RADARSAT-2 data

Science.gov (United States)

Jiao, Xianfeng; Kovacs, John M.; Shang, Jiali; McNairn, Heather; Walters, Dan; Ma, Baoluo; Geng, Xiaoyuan

2014-10-01

The aim of this paper is to assess the accuracy of an object-oriented classification of polarimetric Synthetic Aperture Radar (PolSAR) data to map and monitor crops using 19 RADARSAT-2 fine beam polarimetric (FQ) images of an agricultural area in North-eastern Ontario, Canada. Polarimetric images and field data were acquired during the 2011 and 2012 growing seasons. The classification and field data collection focused on the main crop types grown in the region, which include: wheat, oat, soybean, canola and forage. The polarimetric parameters were extracted with PolSAR analysis using both the Cloude-Pottier and Freeman-Durden decompositions. The object-oriented classification, with a single date of PolSAR data, was able to classify all five crop types with an accuracy of 95% and Kappa of 0.93; a 6% improvement in comparison with linear-polarization only classification. However, the time of acquisition is crucial. The larger biomass crops of canola and soybean were most accurately mapped, whereas the identification of oat and wheat were more variable. The multi-temporal data using the Cloude-Pottier decomposition parameters provided the best classification accuracy compared to the linear polarizations and the Freeman-Durden decomposition parameters. In general, the object-oriented classifications were able to accurately map crop types by reducing the noise inherent in the SAR data. Furthermore, using the crop classification maps we were able to monitor crop growth stage based on a trend analysis of the radar response. Based on field data from canola crops, there was a strong relationship between the phenological growth stage based on the BBCH scale, and the HV backscatter and entropy.

Development of object-oriented software technique in field of high energy and nuclear physics

International Nuclear Information System (INIS)

Ye Yanlin; Ying Jun; Chen Tao

1997-01-01

The background for developing object-oriented software technique in high energy and nuclear physics has been introduced. The progress made at CERN and US has been outlined. The merit and future of various software techniques have been commented

Improving the human readability of Arden Syntax medical logic modules using a concept-oriented terminology and object-oriented programming expressions.

Science.gov (United States)

Choi, Jeeyae; Bakken, Suzanne; Lussier, Yves A; Mendonça, Eneida A

2006-01-01

Medical logic modules are a procedural representation for sharing task-specific knowledge for decision support systems. Based on the premise that clinicians may perceive object-oriented expressions as easier to read than procedural rules in Arden Syntax-based medical logic modules, we developed a method for improving the readability of medical logic modules. Two approaches were applied: exploiting the concept-oriented features of the Medical Entities Dictionary and building an executable Java program to replace Arden Syntax procedural expressions. The usability evaluation showed that 66% of participants successfully mapped all Arden Syntax rules to Java methods. These findings suggest that these approaches can play an essential role in the creation of human readable medical logic modules and can potentially increase the number of clinical experts who are able to participate in the creation of medical logic modules. Although our approaches are broadly applicable, we specifically discuss the relevance to concept-oriented nursing terminologies and automated processing of task-specific nursing knowledge.

A study of earthquake-induced building detection by object oriented classification approach

Science.gov (United States)

Sabuncu, Asli; Damla Uca Avci, Zehra; Sunar, Filiz

2017-04-01

Among the natural hazards, earthquakes are the most destructive disasters and cause huge loss of lives, heavily infrastructure damages and great financial losses every year all around the world. According to the statistics about the earthquakes, more than a million earthquakes occur which is equal to two earthquakes per minute in the world. Natural disasters have brought more than 780.000 deaths approximately % 60 of all mortality is due to the earthquakes after 2001. A great earthquake took place at 38.75 N 43.36 E in the eastern part of Turkey in Van Province on On October 23th, 2011. 604 people died and about 4000 buildings seriously damaged and collapsed after this earthquake. In recent years, the use of object oriented classification approach based on different object features, such as spectral, textural, shape and spatial information, has gained importance and became widespread for the classification of high-resolution satellite images and orthophotos. The motivation of this study is to detect the collapsed buildings and debris areas after the earthquake by using very high-resolution satellite images and orthophotos with the object oriented classification and also see how well remote sensing technology was carried out in determining the collapsed buildings. In this study, two different land surfaces were selected as homogenous and heterogeneous case study areas. In the first step of application, multi-resolution segmentation was applied and optimum parameters were selected to obtain the objects in each area after testing different color/shape and compactness/smoothness values. In the next step, two different classification approaches, namely "supervised" and "unsupervised" approaches were applied and their classification performances were compared. Object-based Image Analysis (OBIA) was performed using e-Cognition software.

Artificial Intelligence in the service of system administrators

CERN Multimedia

CERN. Geneva

2012-01-01

Research has been performed to try to automatize (some) system administration tasks, starting in 2001 when IBM defined the so-called “self objectives” supposed to lead to “autonomic computing”. In this context, we present a framework that makes use of artificial intelligence and machine learning to monitor and diagnose at a low level and in a non intrusive way  Linux-based systems and their interaction with software. Moreover, the multi agent approach we use, coupled with a "object oriented paradigm" architecture should increase a lot our learning speed, and highlight relations between probl...

Modeling a terminology-based electronic nursing record system: an object-oriented approach.

Science.gov (United States)

Park, Hyeoun-Ae; Cho, InSook; Byeun, NamSoo

2007-10-01

The aim of this study was to present our perspectives on healthcare information analysis at a conceptual level and the lessons learned from our experience with the development of a terminology-based enterprise electronic nursing record system - which was one of components in an EMR system at a tertiary teaching hospital in Korea - using an object-oriented system analysis and design concept. To ensure a systematic approach and effective collaboration, the department of nursing constituted a system modeling team comprising a project manager, systems analysts, user representatives, an object-oriented methodology expert, and healthcare informaticists (including the authors). A rational unified process (RUP) and the Unified Modeling Language were used as a development process and for modeling notation, respectively. From the scenario and RUP approach, user requirements were formulated into use case sets and the sequence of activities in the scenario was depicted in an activity diagram. The structure of the system was presented in a class diagram. This approach allowed us to identify clearly the structural and behavioral states and important factors of a terminology-based ENR system (e.g., business concerns and system design concerns) according to the viewpoints of both domain and technical experts.

Analyzing and designing object-oriented missile simulations with concurrency

Science.gov (United States)

Randorf, Jeffrey Allen

2000-11-01

A software object model for the six degree-of-freedom missile modeling domain is presented. As a precursor, a domain analysis of the missile modeling domain was started, based on the Feature-Oriented Domain Analysis (FODA) technique described by the Software Engineering Institute (SEI). It was subsequently determined the FODA methodology is functionally equivalent to the Object Modeling Technique. The analysis used legacy software documentation and code from the ENDOSIM, KDEC, and TFrames 6-DOF modeling tools, including other technical literature. The SEI Object Connection Architecture (OCA) was the template for designing the object model. Three variants of the OCA were considered---a reference structure, a recursive structure, and a reference structure with augmentation for flight vehicle modeling. The reference OCA design option was chosen for maintaining simplicity while not compromising the expressive power of the OMT model. The missile architecture was then analyzed for potential areas of concurrent computing. It was shown how protected objects could be used for data passing between OCA object managers, allowing concurrent access without changing the OCA reference design intent or structure. The implementation language was the 1995 release of Ada. OCA software components were shown how to be expressed as Ada child packages. While acceleration of several low level and other high operations level are possible on proper hardware, there was a 33% degradation of 4th order Runge-Kutta integrator performance of two simultaneous ordinary differential equations using Ada tasking on a single processor machine. The Defense Department's High Level Architecture was introduced and explained in context with the OCA. It was shown the HLA and OCA were not mutually exclusive architectures, but complimentary. HLA was shown as an interoperability solution, with the OCA as an architectural vehicle for software reuse. Further directions for implementing a 6-DOF missile modeling

Temporal locality optimizations for stencil operations for parallel object-oriented scientific frameworks on cache-based architectures

Energy Technology Data Exchange (ETDEWEB)

Bassetti, F.; Davis, K.; Quinlan, D.

1998-12-01

High-performance scientific computing relies increasingly on high-level large-scale object-oriented software frameworks to manage both algorithmic complexity and the complexities of parallelism: distributed data management, process management, inter-process communication, and load balancing. This encapsulation of data management, together with the prescribed semantics of a typical fundamental component of such object-oriented frameworks--a parallel or serial array-class library--provides an opportunity for increasingly sophisticated compile-time optimization techniques. This paper describes a technique for introducing cache blocking suitable for certain classes of numerical algorithms, demonstrates and analyzes the resulting performance gains, and indicates how this optimization transformation is being automated.

Object-Oriented Programming in the Development of Containment Analysis Code

International Nuclear Information System (INIS)

Han, Tae Young; Hong, Soon Joon; Hwang, Su Hyun; Lee, Byung Chul; Byun, Choong Sup

2009-01-01

After the mid 1980s, the new programming concept, Object-Oriented Programming (OOP), was introduced and designed, which has the features such as the information hiding, encapsulation, modularity and inheritance. These offered much more convenient programming paradigm to code developers. The OOP concept was readily developed into the programming language as like C++ in the 1990s and is being widely used in the modern software industry. In this paper, we show that the OOP concept is successfully applicable to the development of safety analysis code for containment and propose the more explicit and easy OOP design for developers

Business engineering. Generic Software Architecture in an Object Oriented View

Directory of Open Access Journals (Sweden)

Mihaela MURESAN

2006-01-01

Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

Development of an object oriented nodal code using the refined AFEN derived from the method of component decomposition

International Nuclear Information System (INIS)

Noh, J. M.; Yoo, J. W.; Joo, H. K.

2004-01-01

In this study, we invented a method of component decomposition to derive the systematic inter-nodal coupled equations of the refined AFEN method and developed an object oriented nodal code to solve the derived coupled equations. The method of component decomposition decomposes the intra-nodal flux expansion of a nodal method into even and odd components in three dimensions to reduce the large coupled linear system equation into several small single equations. This method requires no additional technique to accelerate the iteration process to solve the inter-nodal coupled equations, since the derived equations can automatically act as the coarse mesh re-balance equations. By utilizing the object oriented programming concepts such as abstraction, encapsulation, inheritance and polymorphism, dynamic memory allocation, and operator overloading, we developed an object oriented nodal code that can facilitate the input/output and the dynamic control of the memories, and can make the maintenance easy. (authors)

Version II of the ISACS Intelligent Coordinator: object-oriented design and implementation

International Nuclear Information System (INIS)

Liholt, V.; Miazza, P.

1993-03-01

Within the Integrated Surveillance And Control System (ISACS-1)prototype coupled to the NORS PWR simulator, the Intelligent Coordinator (IC) is a central software module. It provides for example the operators with high-level knowledge on the overall plant status. This is performed through the integration of information fetched from the process and different Computerised Operator Support Systems. In 1991, the first version of ISACS and its associated Intelligent Information Coordinator came into operation. During initial ISACS-1 test runs, minor malfunctions were evidently detected in the IC software. At the same time, new reasoning capabilities were also required. A careful analysis of the IC software, implemented with the software shell G2, revealed that its software structure did not allow any easy extension. This report presents in detail the object-oriented redesign of the Intelligent Coordinator of ISACS-1 Firstly, the main capabilities of the Intelligent Coordinator are recalled. Then, the different object classes composing the application are commented in detail The implementation of this new design with the G2 software shell is illustrated through examples. This allows us at the same time to comment our experiences made with the G2 tool. Finally, a quantitative comparison between the successive versions of the Intelligent Coordinator shows clearly the improvements achieved by this object-oriented redesign. A drastic reduction of the number of production rules attests that a better representation of the plant expert knowledge embedded in the Intelligent Coordinator has been achieved. (author)

An artificial intelligence approach to accelerator control systems

International Nuclear Information System (INIS)

Schultz, D.E.; Hurd, J.W.; Brown, S.K.

1987-01-01

An experiment was recently started at LAMPF to evaluate the power and limitations of using artificial intelligence techniques to solve problems in accelerator control and operation. A knowledge base was developed to describe the characteristics and the relationships of the first 30 devices in the LAMPF H+ beam line. Each device was categorized and pertinent attributes for each category defined. Specific values were assigned in the knowledge base to represent each actual device. Relationships between devices are modeled using the artificial intelligence techniques of rules, active values, and object-oriented methods. This symbolic model, built using the Knowledge Engineering Environment (KEE) system, provides a framework for analyzing faults, tutoring trainee operators, and offering suggestions to assist in beam tuning. Based on information provided by the domain expert responsible for tuning this portion of the beam line, additional rules were written to describe how he tunes, how he analyzes what is actually happening, and how he deals with failures. Initial results have shown that artificial intelligence techniques can be a useful adjunct to traditional methods of numerical simulation. Successful and efficient operation of future accelerators may depend on the proper merging of symbolic reasoning and conventional numerical control algorithms

SISSY: An example of a multi-threaded, networked, object-oriented databased application

International Nuclear Information System (INIS)

Scipioni, B.; Liu, D.; Song, T.

1993-05-01

The Systems Integration Support SYstem (SISSY) is presented and its capabilities and techniques are discussed. It is fully automated data collection and analysis system supporting the SSCL's systems analysis activities as they relate to the Physics Detector and Simulation Facility (PDSF). SISSY itself is a paradigm of effective computing on the PDSF. It uses home-grown code (C++), network programming (RPC, SNMP), relational (SYBASE) and object-oriented (ObjectStore) DBMSs, UNIX operating system services (IRIX threads, cron, system utilities, shells scripts, etc.), and third party software applications (NetCentral Station, Wingz, DataLink) all of which act together as a single application to monitor and analyze the PDSF

Development of an object-oriented simulation code for repository performance assessment

International Nuclear Information System (INIS)

Tsujimoto, Keiichi; Ahn, J.

1999-01-01

As understanding for mechanisms of radioactivity confinement by a deep geologic repository improves at the individual process level, it has become imperative to evaluate consequences of individual processes to the performance of the whole repository system. For this goal, the authors have developed a model for radionuclide transport in, and release from, the repository region by incorporating multiple-member decay chains and multiple waste canisters. A computer code has been developed with C++, an object-oriented language. By utilizing the feature that a geologic repository consists of thousands of objects of the same kind, such as the waste canister, the repository region is divided into multiple compartments and objects for simulation of radionuclide transport. Massive computational tasks are distributed over, and executed by, multiple networked workstations, with the help of parallel virtual machine (PVM) technology. Temporal change of the mass distribution of 28 radionuclides in the repository region for the time period of 100 million yr has been successfully obtained by the code

GELLO: an object-oriented query and expression language for clinical decision support.

Science.gov (United States)

Sordo, Margarita; Ogunyemi, Omolola; Boxwala, Aziz A; Greenes, Robert A

2003-01-01

GELLO is a purpose-specific, object-oriented (OO) query and expression language. GELLO is the result of a concerted effort of the Decision Systems Group (DSG) working with the HL7 Clinical Decision Support Technical Committee (CDSTC) to provide the HL7 community with a common format for data encoding and manipulation. GELLO will soon be submitted for ballot to the HL7 CDSTC for consideration as a standard.

An Object-Based Image Analysis Method for Monitoring Land Conversion by Artificial Sprawl Use of RapidEye and IRS Data

Directory of Open Access Journals (Sweden)

Maud Balestrat

2012-02-01

Full Text Available In France, in the peri-urban context, urban sprawl dynamics are particularly strong with huge population growth as well as a land crisis. The increase and spreading of built-up areas from the city centre towards the periphery takes place to the detriment of natural and agricultural spaces. The conversion of land with agricultural potential is all the more worrying as it is usually irreversible. The French Ministry of Agriculture therefore needs reliable and repeatable spatial-temporal methods to locate and quantify loss of land at both local and national scales. The main objective of this study was to design a repeatable method to monitor land conversion characterized by artificial sprawl: (i We used an object-based image analysis to extract artificial areas from satellite images; (ii We built an artificial patch that consists of aggregating all the peripheral areas that characterize artificial areas. The “artificialized” patch concept is an innovative extension of the urban patch concept, but differs in the nature of its components and in the continuity distance applied; (iii The diachronic analysis of artificial patch maps enables characterization of artificial sprawl. The method was applied at the scale of four departments (similar to provinces along the coast of Languedoc-Roussillon, in the South of France, based on two satellite datasets, one acquired in 1996–1997 (Indian Remote Sensing and the other in 2009 (RapidEye. In the four departments, we measured an increase in artificial areas of from 113,000 ha in 1997 to 133,000 ha in 2009, i.e., an 18% increase in 12 years. The package comes in the form of a 1/15,000 valid cartography, usable at the scale of a commune (the smallest territorial division used for administrative purposes in France that can be adapted to departmental and regional scales. The method is reproducible in homogenous spatial-temporal terms, so that it could be used periodically to assess changes in land conversion

DESIGN OF OBJECT-ORIENTED DEBUGGER MODEL BY USING UNIFIED MODELING LANGUAGE

OpenAIRE

Nor Fazlida Mohd Sani; Noor Afiza Mohd Ariffin; Rodziah Atan

2013-01-01

Debugging on computer program is a complex cognitive activity. Although it is complex, itâs still one of the popular issues in computer programming task. It is a difficult task, which is to understand what the error is and how to solve such error? In computer programming the difficulty is to understand the Object-Oriented programming concept together with the programming logic. If the programming logic is incorrect, the program codes will have such error named as logic error and can caused hi...

CICERO: research in the design of software for control systems using the object oriented techniques

Energy Technology Data Exchange (ETDEWEB)

Barillere, R [and others

1996-12-31

CICERO is a collaborative project between industrial companies and research institutes to study the use of object-oriented techniques for needs of complex control systems. The CICERO project is realized in the COBRA standard. 19 refs.

The Implementation of Satellite Attitude Control System Software Using Object Oriented Design

Science.gov (United States)

Reid, W. Mark; Hansell, William; Phillips, Tom; Anderson, Mark O.; Drury, Derek

1998-01-01

NASA established the Small Explorer (SNMX) program in 1988 to provide frequent opportunities for highly focused and relatively inexpensive space science missions. The SMEX program has produced five satellites, three of which have been successfully launched. The remaining two spacecraft are scheduled for launch within the coming year. NASA has recently developed a prototype for the next generation Small Explorer spacecraft (SMEX-Lite). This paper describes the object-oriented design (OOD) of the SMEX-Lite Attitude Control System (ACS) software. The SMEX-Lite ACS is three-axis controlled and is capable of performing sub-arc-minute pointing. This paper first describes high level requirements governing the SMEX-Lite ACS software architecture. Next, the context in which the software resides is explained. The paper describes the principles of encapsulation, inheritance, and polymorphism with respect to the implementation of an ACS software system. This paper will also discuss the design of several ACS software components. Specifically, object-oriented designs are presented for sensor data processing, attitude determination, attitude control, and failure detection. Finally, this paper will address the establishment of the ACS Foundation Class (AFC) Library. The AFC is a large software repository, requiring a minimal amount of code modifications to produce ACS software for future projects.

Frequent Statement and Dereference Elimination for Imperative and Object-Oriented Distributed Programs

Science.gov (United States)

El-Zawawy, Mohamed A.

2014-01-01

This paper introduces new approaches for the analysis of frequent statement and dereference elimination for imperative and object-oriented distributed programs running on parallel machines equipped with hierarchical memories. The paper uses languages whose address spaces are globally partitioned. Distributed programs allow defining data layout and threads writing to and reading from other thread memories. Three type systems (for imperative distributed programs) are the tools of the proposed techniques. The first type system defines for every program point a set of calculated (ready) statements and memory accesses. The second type system uses an enriched version of types of the first type system and determines which of the ready statements and memory accesses are used later in the program. The third type system uses the information gather so far to eliminate unnecessary statement computations and memory accesses (the analysis of frequent statement and dereference elimination). Extensions to these type systems are also presented to cover object-oriented distributed programs. Two advantages of our work over related work are the following. The hierarchical style of concurrent parallel computers is similar to the memory model used in this paper. In our approach, each analysis result is assigned a type derivation (serves as a correctness proof). PMID:24892098

REGISTRATION OF LASER SCANNING POINT CLOUDS AND AERIAL IMAGES USING EITHER ARTIFICIAL OR NATURAL TIE FEATURES

Directory of Open Access Journals (Sweden)

P. Rönnholm

2012-07-01

Full Text Available Integration of laser scanning data and photographs is an excellent combination regarding both redundancy and complementary. Applications of integration vary from sensor and data calibration to advanced classification and scene understanding. In this research, only airborne laser scanning and aerial images are considered. Currently, the initial registration is solved using direct orientation sensors GPS and inertial measurements. However, the accuracy is not usually sufficient for reliable integration of data sets, and thus the initial registration needs to be improved. A registration of data from different sources requires searching and measuring of accurate tie features. Usually, points, lines or planes are preferred as tie features. Therefore, the majority of resent methods rely highly on artificial objects, such as buildings, targets or road paintings. However, in many areas no such objects are available. For example in forestry areas, it would be advantageous to be able to improve registration between laser data and images without making additional ground measurements. Therefore, there is a need to solve registration using only natural features, such as vegetation and ground surfaces. Using vegetation as tie features is challenging, because the shape and even location of vegetation can change because of wind, for example. The aim of this article was to compare registration accuracies derived by using either artificial or natural tie features. The test area included urban objects as well as trees and other vegetation. In this area, two registrations were performed, firstly, using mainly built objects and, secondly, using only vegetation and ground surface. The registrations were solved applying the interactive orientation method. As a result, using artificial tie features leaded to a successful registration in all directions of the coordinate system axes. In the case of using natural tie features, however, the detection of correct heights was

APPLICATION OF OBJECT ORIENTED PROGRAMMING TECHNIQUES IN FRONT END COMPUTERS

International Nuclear Information System (INIS)

SKELLY, J.F.

1997-01-01

The Front End Computer (FEC) environment imposes special demands on software, beyond real time performance and robustness. FEC software must manage a diverse inventory of devices with individualistic timing requirements and hardware interfaces. It must implement network services which export device access to the control system at large, interpreting a uniform network communications protocol into the specific control requirements of the individual devices. Object oriented languages provide programming techniques which neatly address these challenges, and also offer benefits in terms of maintainability and flexibility. Applications are discussed which exhibit the use of inheritance, multiple inheritance and inheritance trees, and polymorphism to address the needs of FEC software

Bridging FORTRAN to object oriented paradigm for HEP data modeling task

International Nuclear Information System (INIS)

Huang, J.

1993-12-01

Object oriented (OO) technology appears to offer tangible benefits to the high energy physics (HEP) community. Yet many physicists view this newest software development used with much reservation and reluctance. Facing the reality of having to support the existing physics applications, which are written in FORTRAN, the software engineers in the Computer Engineering Group of the Physics Research Division at the Superconducting Super Collider Laboratory have accepted the challenge of mixing an old language with the new technology. This paper describes the experience and the techniques devised to fit FORTRAN into the OO paradigm (OOP)

Any effects of social orientation priming on object-location memory are smaller than initially reported.

Science.gov (United States)

Drouin, Héloïse; Davidson, Patrick S R

2015-12-01

It has previously been reported that priming a collectivistic social orientation (compared with an individualistic one) boosts object-location memory (Kühnen & Oyserman, 2002; Oyserman, Sorensen, Reber, & Chen, 2009). We conducted 4 experiments to replicate this reported effect, using the same methods as in those initial reports. In Experiment 1 (n = 145), we found a hint of a priming effect on object-location memory, but also an unanticipated interaction between priming and gender. In Experiment 2 (n = 90), we included gender as a formal factor and doubled the "dosage" of the priming, yet did not see any priming effects on memory. In Experiment 3 (n = 101), we octupled the priming "dosage" and again saw no significant effects on memory. Finally, in Experiment 4 (n = 102), we performed an exact replication of the methods of the original reports and again found no priming effects on memory. Any effects of this type of social orientation priming on object-location memory appear to be smaller and/or less robust than initially thought. (c) 2015 APA, all rights reserved).

Development of object oriented program `SONSHO` for strength evaluation. Manual of Version 4.0 program

Energy Technology Data Exchange (ETDEWEB)

Hosogai, Hiromi [Joyo Industries Co. Ltd., Tokai, Ibaraki (Japan); Kasahara, Naoto

1998-07-01

Object Oriented Program `SONSHO` predicts creep fatigue damage factors based on Elevated Temperature Structural Design Guide for `Monju` and other various procedures from stress classification data obtained from structural analysis results. From view point of program implementation, it is required that external programs interface and frequent revise from update of material and creep fatigue evaluation methods. Object oriented approach was continuously introduced to improve these aspects of the program. Version 4.0 has the following new functions. (1) Material strength library was implemented as an independent program module based on Microsoft Active X control and 32bitDLL technologies, which can be accessed by general Windows programs. (2) Self instruction system `Wizard` enables manual less operation. (3) Microsoft common object model (COM) was adopted for program interface, and this program can communicate with Excel sheet data on memory. Sonsho Ver.4.0 can work on Windows 95 or Windows NT4.0. Microsoft Visual Basic 5.0 (Enterprose Edition) and Microsoft FORTRAN Power Station 4.0 were adopted for program. (author)

Sexual orientation and spatial position effects on selective forms of object location memory.

Science.gov (United States)

Rahman, Qazi; Newland, Cherie; Smyth, Beatrice Mary

2011-04-01

Prior research has demonstrated robust sex and sexual orientation-related differences in object location memory in humans. Here we show that this sexual variation may depend on the spatial position of target objects and the task-specific nature of the spatial array. We tested the recovery of object locations in three object arrays (object exchanges, object shifts, and novel objects) relative to veridical center (left compared to right side of the arrays) in a sample of 35 heterosexual men, 35 heterosexual women, and 35 homosexual men. Relative to heterosexual men, heterosexual women showed better location recovery in the right side of the array during object exchanges and homosexual men performed better in the right side during novel objects. However, the difference between heterosexual and homosexual men disappeared after controlling for IQ. Heterosexual women and homosexual men did not differ significantly from each other in location change detection with respect to task or side of array. These data suggest that visual space biases in processing categorical spatial positions may enhance aspects of object location memory in heterosexual women. Copyright © 2010 Elsevier Inc. All rights reserved.

Object Oriented Approach to Software Development for LHC Experiments

CERN Multimedia

Tummers, B J; Day, C; Innocente, V; Mount, R; Visser, E; Burnett, T H; Balke, C

2002-01-01

% RD41 \\\\ \\\\ We propose to study the viability of the Object Oriented~(OO) approach for developing the code for LHC experiments. The authors of this proposal will learn the key issues of this approach:~~OO analysis and design. Several methodologies will be studied to select the most appropriate for the High Energy Physics case. Some Computer Aided Software Engineering tools and implementation languages will be evaluated. These studies will be carried out with various well-defined prototypes, some of which have been defined in a preceding study and some of which will be defined in the course of this R\\&D project. We propose to also study in this project how the OO approach enhances a different, and hopefully better, project management. Management tools will be tried and professional training will be organized.

An object-oriented mobile health system with usability features.

Science.gov (United States)

Escarfullet, Krystle; Moore, Cantera; Tucker, Shari; Wei, June

2012-01-01

Mobile health (m-health) comprises the concept of utilising mobile devices to carry out the task of viewing electronic medical records, reserving medical appointments with a patient's medical provider and electronically refilling prescriptions. This paper aims at developing a m-health system to improve usability from a user's perspective. Specifically, it first developed a m-health model by logically linking characteristics of the m-health system together based on information flows. Then, the system requirements were collected by using a developed questionnaire. These requirements were structured and further in-depth analysis was conducted by using an object-oriented approach based on unified modelling language, such as use-case, sequence and analysis class diagrams. This research will be beneficial to decision makers and developers in the mobile healthcare industry.

Implications of perspective in teaching objects first and object design

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

2005-01-01

There are an increasing number of books published on the important topics of "object-oriented programming" and "object-oriented design" for use in education. However, object-orientation can be viewed from a number of different perspectives---each perspective having its benefits and liabilities...

Applications of an OO (Objected Oriented) methodology and case to a DAQ system

International Nuclear Information System (INIS)

Bee, C.P.; Eshghi, S.; Jones, R.

1996-01-01

The RD13 project has evaluated the use of the Object Oriented Information Engineering (OOIE) method during the development of several software components connected to the DAQ system. The method is supported by a sophisticated commercial CASE tool (Object Management Workbench) and programming environment (Kappa) which covers the full life-cycle of the software including model simulation, code generation and application deployment. This paper gives an overview of the method, CASE tool, DAD components which have been developed and we relate our experiences with the method and tool, its integration into our development environment and the spiral life cycle if supports. (author)

Diagram, a Learning Environment for Initiation to Object-Oriented Modeling with UML Class Diagrams

Science.gov (United States)

Py, Dominique; Auxepaules, Ludovic; Alonso, Mathilde

2013-01-01

This paper presents Diagram, a learning environment for object-oriented modelling (OOM) with UML class diagrams. Diagram an open environment, in which the teacher can add new exercises without constraints on the vocabulary or the size of the diagram. The interface includes methodological help, encourages self-correcting and self-monitoring, and…

Analyzing the Quality of Students Interaction in a Distance Learning Object-Oriented Programming Discipline

Science.gov (United States)

Carvalho, Elizabeth Simão

2015-01-01

Teaching object-oriented programming to students in an in-classroom environment demands well-thought didactic and pedagogical strategies in order to guarantee a good level of apprenticeship. To teach it on a completely distance learning environment (e-learning) imposes possibly other strategies, besides those that the e-learning model of Open…

Development of a Dynamically Configurable,Object-Oriented Framework for Distributed, Multi-modal Computational Aerospace Systems Simulation

Science.gov (United States)

Afjeh, Abdollah A.; Reed, John A.

2003-01-01

This research is aimed at developing a neiv and advanced simulation framework that will significantly improve the overall efficiency of aerospace systems design and development. This objective will be accomplished through an innovative integration of object-oriented and Web-based technologies ivith both new and proven simulation methodologies. The basic approach involves Ihree major areas of research: Aerospace system and component representation using a hierarchical object-oriented component model which enables the use of multimodels and enforces component interoperability. Collaborative software environment that streamlines the process of developing, sharing and integrating aerospace design and analysis models. . Development of a distributed infrastructure which enables Web-based exchange of models to simplify the collaborative design process, and to support computationally intensive aerospace design and analysis processes. Research for the first year dealt with the design of the basic architecture and supporting infrastructure, an initial implementation of that design, and a demonstration of its application to an example aircraft engine system simulation.

Survey of source code metrics for evaluating testability of object oriented systems

OpenAIRE

Shaheen , Muhammad Rabee; Du Bousquet , Lydie

2010-01-01

Software testing is costly in terms of time and funds. Testability is a software characteristic that aims at producing systems easy to test. Several metrics have been proposed to identify the testability weaknesses. But it is sometimes difficult to be convinced that those metrics are really related with testability. This article is a critical survey of the source-code based metrics proposed in the literature for object-oriented software testability. It underlines the necessity to provide test...

Improving package structure of object-oriented software using multi-objective optimization and weighted class connections

Directory of Open Access Journals (Sweden)

Amarjeet

2017-07-01

Full Text Available The software maintenance activities performed without following the original design decisions about the package structure usually deteriorate the quality of software modularization, leading to decay of the quality of the system. One of the main reasons for such structural deterioration is inappropriate grouping of source code classes in software packages. To improve such grouping/modular-structure, previous researchers formulated the software remodularization problem as an optimization problem and solved it using search-based meta-heuristic techniques. These optimization approaches aimed at improving the quality metrics values of the structure without considering the original package design decisions, often resulting into a totally new software modularization. The entirely changed software modularization becomes costly to realize as well as difficult to understand for the developers/maintainers. To alleviate this issue, we propose a multi-objective optimization approach to improve the modularization quality of an object-oriented system with minimum possible movement of classes between existing packages of original software modularization. The optimization is performed using NSGA-II, a widely-accepted multi-objective evolutionary algorithm. In order to ensure minimum modification of original package structure, a new approach of computing class relations using weighted strengths has been proposed here. The weights of relations among different classes are computed on the basis of the original package structure. A new objective function has been formulated using these weighted class relations. This objective function drives the optimization process toward better modularization quality simultaneously ensuring preservation of original structure. To evaluate the results of the proposed approach, a series of experiments are conducted over four real-worlds and two random software applications. The experimental results clearly indicate the effectiveness

An object-oriented approach for harmonization of multimedia markup languages

Science.gov (United States)

Chen, Yih-Feng; Kuo, May-Chen; Sun, Xiaoming; Kuo, C.-C. Jay

2003-12-01

An object-oriented methodology is proposed to harmonize several different markup languages in this research. First, we adopt the Unified Modelling Language (UML) as the data model to formalize the concept and the process of the harmonization process between the eXtensible Markup Language (XML) applications. Then, we design the Harmonization eXtensible Markup Language (HXML) based on the data model and formalize the transformation between the Document Type Definitions (DTDs) of the original XML applications and HXML. The transformation between instances is also discussed. We use the harmonization of SMIL and X3D as an example to demonstrate the proposed methodology. This methodology can be generalized to various application domains.

The International Accounting Standards Board’s Progress in Promoting Judgement Through Objectives-Oriented Accounting Standards

OpenAIRE

Tanja Lakovic; Jayne Fuglister

2013-01-01

This study analyzes how the International Accounting Standards Board (IASB) promotes professional judgement by issuing objectives-oriented accounting standards and exposure drafts.  We focus on the the role of judgement as outlined in Phase I of the IASB Conceptual Framework (CF), Chapter 1, “Objective of General Purpose Financial Statements” and Chapter 3, “Qualitative Characteristics of Useful Financial Information” (IASB 2010). We discuss how the framework, when viewed through the prism of...

Introducing Object-Oriented Programming

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard

2008-01-01

The practice of teaching programming at universities, colleges and high schools went through a major change roughly in the mid 1990s: The teaching of objectorientation in introductory courses slowly became mainstream. Fairly soon, the Object First or Objects Early school of thought was formulated...

Bibliography. Computer-Oriented Projects, 1987.

Science.gov (United States)

Smith, Richard L., Comp.

1988-01-01

Provides an annotated list of references on computer-oriented projects. Includes information on computers; hands-on versus simulations; games; instruction; students' attitudes and learning styles; artificial intelligence; tutoring; and application of spreadsheets. (RT)

An object-oriented framework for medical image registration, fusion, and visualization.

Science.gov (United States)

Zhu, Yang-Ming; Cochoff, Steven M

2006-06-01

An object-oriented framework for image registration, fusion, and visualization was developed based on the classic model-view-controller paradigm. The framework employs many design patterns to facilitate legacy code reuse, manage software complexity, and enhance the maintainability and portability of the framework. Three sample applications built a-top of this framework are illustrated to show the effectiveness of this framework: the first one is for volume image grouping and re-sampling, the second one is for 2D registration and fusion, and the last one is for visualization of single images as well as registered volume images.

Object oriented software for simulation and reconstruction of big alignment systems

CERN Document Server

Arce, P

2003-01-01

Modern high-energy physics experiments require tracking detectors to provide high precision under difficult working conditions (high magnetic field, gravity loads and temperature gradients). This is the reason why several of them are deciding to implement optical alignment systems to monitor the displacement of tracking elements in operation. To simulate and reconstruct optical alignment systems a general purpose software, named COCOA, has been developed, using the object oriented paradigm and software engineering techniques. Thanks to the big flexibility in its design, COCOA is able to reconstruct any optical system made of a combination of the following objects: laser, x-hair laser, incoherent source - pinhole, lens, mirror, plate splitter, cube splitter, optical square, rhomboid prism, 2D sensor, 1D sensor, distance-meter, tilt-meter, user-defined. COCOA was designed to satisfy the requirements of the CMS alignment system, which has several thousands of components. Sparse matrix techniques had been investi...

Recent developments and object-oriented approach in FTU database

International Nuclear Information System (INIS)

Bertocchi, A.; Bracco, G.; Buceti, G.; Centioli, C.; Iannone, F.; Manduchi, G.; Nanni, U.; Panella, M.; Stracuzzi, C.; Vitale, V.

2001-01-01

During the last two years, the experimental database of Frascati Tokamak Upgrade (FTU) has been changed from several points of view, particularly: (i) the data and the analysis codes have been moved from the IBM main frame to Unix platforms making enabling the users to take advantage of the large quantities of commercial and free software available under Unix (Matlab, IDL, etc); (ii) AFS (Andrew File System) has been chosen as the distributed file system making the data available on all the nodes and distributing the workload; (iii) 'One measure/one file' philosophy (vs. the previous 'one pulse/one file') has been adopted increasing the number of files into the database but, at the same time, allowing the most important data to be available just after the plasma discharge. The client-server architecture has been tested using the signal viewer client jScope. Moreover, an object oriented data model (OODM) of FTU experimental data has been tried: a generalized model in tokamak experimental data has been developed with typical concepts such as abstraction, encapsulation, inheritance, and polymorphism. The model has been integrated with data coming from different databases, building an Object Warehouse to extract, with data mining techniques, meaningful trends and patterns from huge amounts of data

Field Model: An Object-Oriented Data Model for Fields

Science.gov (United States)

Moran, Patrick J.

2001-01-01

We present an extensible, object-oriented data model designed for field data entitled Field Model (FM). FM objects can represent a wide variety of fields, including fields of arbitrary dimension and node type. FM can also handle time-series data. FM achieves generality through carefully selected topological primitives and through an implementation that leverages the potential of templated C++. FM supports fields where the nodes values are paired with any cell type. Thus FM can represent data where the field nodes are paired with the vertices ("vertex-centered" data), fields where the nodes are paired with the D-dimensional cells in R(sup D) (often called "cell-centered" data), as well as fields where nodes are paired with edges or other cell types. FM is designed to effectively handle very large data sets; in particular FM employs a demand-driven evaluation strategy that works especially well with large field data. Finally, the interfaces developed for FM have the potential to effectively abstract field data based on adaptive meshes. We present initial results with a triangular adaptive grid in R(sup 2) and discuss how the same design abstractions would work equally well with other adaptive-grid variations, including meshes in R(sup 3).

Reliability-oriented multi-objective optimal decision-making approach for uncertainty-based watershed load reduction

International Nuclear Information System (INIS)

Dong, Feifei; Liu, Yong; Su, Han; Zou, Rui; Guo, Huaicheng

2015-01-01

Water quality management and load reduction are subject to inherent uncertainties in watershed systems and competing decision objectives. Therefore, optimal decision-making modeling in watershed load reduction is suffering due to the following challenges: (a) it is difficult to obtain absolutely “optimal” solutions, and (b) decision schemes may be vulnerable to failure. The probability that solutions are feasible under uncertainties is defined as reliability. A reliability-oriented multi-objective (ROMO) decision-making approach was proposed in this study for optimal decision making with stochastic parameters and multiple decision reliability objectives. Lake Dianchi, one of the three most eutrophic lakes in China, was examined as a case study for optimal watershed nutrient load reduction to restore lake water quality. This study aimed to maximize reliability levels from considerations of cost and load reductions. The Pareto solutions of the ROMO optimization model were generated with the multi-objective evolutionary algorithm, demonstrating schemes representing different biases towards reliability. The Pareto fronts of six maximum allowable emission (MAE) scenarios were obtained, which indicated that decisions may be unreliable under unpractical load reduction requirements. A decision scheme identification process was conducted using the back propagation neural network (BPNN) method to provide a shortcut for identifying schemes at specific reliability levels for decision makers. The model results indicated that the ROMO approach can offer decision makers great insights into reliability tradeoffs and can thus help them to avoid ineffective decisions. - Highlights: • Reliability-oriented multi-objective (ROMO) optimal decision approach was proposed. • The approach can avoid specifying reliability levels prior to optimization modeling. • Multiple reliability objectives can be systematically balanced using Pareto fronts. • Neural network model was used to

Reliability-oriented multi-objective optimal decision-making approach for uncertainty-based watershed load reduction

Energy Technology Data Exchange (ETDEWEB)

Dong, Feifei [College of Environmental Science and Engineering, Key Laboratory of Water and Sediment Sciences (MOE), Peking University, Beijing 100871 (China); Liu, Yong, E-mail: yongliu@pku.edu.cn [College of Environmental Science and Engineering, Key Laboratory of Water and Sediment Sciences (MOE), Peking University, Beijing 100871 (China); Institute of Water Sciences, Peking University, Beijing 100871 (China); Su, Han [College of Environmental Science and Engineering, Key Laboratory of Water and Sediment Sciences (MOE), Peking University, Beijing 100871 (China); Zou, Rui [Tetra Tech, Inc., 10306 Eaton Place, Ste 340, Fairfax, VA 22030 (United States); Yunnan Key Laboratory of Pollution Process and Management of Plateau Lake-Watershed, Kunming 650034 (China); Guo, Huaicheng [College of Environmental Science and Engineering, Key Laboratory of Water and Sediment Sciences (MOE), Peking University, Beijing 100871 (China)

2015-05-15

Water quality management and load reduction are subject to inherent uncertainties in watershed systems and competing decision objectives. Therefore, optimal decision-making modeling in watershed load reduction is suffering due to the following challenges: (a) it is difficult to obtain absolutely “optimal” solutions, and (b) decision schemes may be vulnerable to failure. The probability that solutions are feasible under uncertainties is defined as reliability. A reliability-oriented multi-objective (ROMO) decision-making approach was proposed in this study for optimal decision making with stochastic parameters and multiple decision reliability objectives. Lake Dianchi, one of the three most eutrophic lakes in China, was examined as a case study for optimal watershed nutrient load reduction to restore lake water quality. This study aimed to maximize reliability levels from considerations of cost and load reductions. The Pareto solutions of the ROMO optimization model were generated with the multi-objective evolutionary algorithm, demonstrating schemes representing different biases towards reliability. The Pareto fronts of six maximum allowable emission (MAE) scenarios were obtained, which indicated that decisions may be unreliable under unpractical load reduction requirements. A decision scheme identification process was conducted using the back propagation neural network (BPNN) method to provide a shortcut for identifying schemes at specific reliability levels for decision makers. The model results indicated that the ROMO approach can offer decision makers great insights into reliability tradeoffs and can thus help them to avoid ineffective decisions. - Highlights: • Reliability-oriented multi-objective (ROMO) optimal decision approach was proposed. • The approach can avoid specifying reliability levels prior to optimization modeling. • Multiple reliability objectives can be systematically balanced using Pareto fronts. • Neural network model was used to

Development of an object oriented lattice QCD code ''Bridge++''

International Nuclear Information System (INIS)

Ueda, S; Aoki, S; Aoyama, T; Kanaya, K; Taniguchi, Y; Matsufuru, H; Motoki, S; Namekawa, Y; Nemura, H; Ukita, N

2014-01-01

We are developing a new lattice QCD code set ''Bridge++'' aiming at extensible, readable, and portable workbench for QCD simulations, while keeping a high performance at the same time. Bridge++ covers conventional lattice actions and numerical algorithms. The code set is constructed in C++ with an object oriented programming. In this paper we describe fundamental ingredients of the code and the current status of development

Artificial Muscles: Mechanisms, Applications, and Challenges.

Science.gov (United States)

Mirvakili, Seyed M; Hunter, Ian W

2018-02-01

The area of artificial muscle is a highly interdisciplinary field of research that has evolved rapidly in the last 30 years. Recent advances in nanomaterial fabrication and characterization, specifically carbon nanotubes and nanowires, have had major contributions in the development of artificial muscles. However, what can artificial muscles really do for humans? This question is considered here by first examining nature's solutions to this design problem and then discussing the structure, actuation mechanism, applications, and limitations of recently developed artificial muscles, including highly oriented semicrystalline polymer fibers; nanocomposite actuators; twisted nanofiber yarns; thermally activated shape-memory alloys; ionic-polymer/metal composites; dielectric-elastomer actuators; conducting polymers; stimuli-responsive gels; piezoelectric, electrostrictive, magnetostrictive, and photostrictive actuators; photoexcited actuators; electrostatic actuators; and pneumatic actuators. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Building and Using Object-Oriented Frameworks for Semi-Structures Domains: The Sales Promotion Domain as Example

NARCIS (Netherlands)

A. Dalebout; J. van Hillegersberg (Jos); B. Wierenga (Berend)

1998-01-01

textabstractObject-oriented (00) frameworks are considered an important step forward in developing software applications efficiently. Success of frameworks has however predominantly been limited to structured domains.This paper describes a method for developing 00 domainframeworks for

Characterization of analysis activity in the development of object-oriented software. Application to a examination system in nuclear medicine

International Nuclear Information System (INIS)

Bayas, Marcos Raul Cordova.

1995-01-01

The object-oriented approach, formerly proposed as an alternative to conventional software coding techniques, has expanded its scope to other phases in software development, including the analysis phase. This work discusses basic concepts and major object oriented analysis methods, drawing comparisons with structured analysis, which has been the dominant paradigm in systems analysis. The comparison is based on three interdependent system aspects, that must be specified during the analysis phase: data, control and functionality. The specification of a radioisotope examination archive system is presented as a case study. (author). 45 refs., 87 figs., 1 tab

Building a genome database using an object-oriented approach.

Science.gov (United States)

Barbasiewicz, Anna; Liu, Lin; Lang, B Franz; Burger, Gertraud

2002-01-01

GOBASE is a relational database that integrates data associated with mitochondria and chloroplasts. The most important data in GOBASE, i. e., molecular sequences and taxonomic information, are obtained from the public sequence data repository at the National Center for Biotechnology Information (NCBI), and are validated by our experts. Maintaining a curated genomic database comes with a towering labor cost, due to the shear volume of available genomic sequences and the plethora of annotation errors and omissions in records retrieved from public repositories. Here we describe our approach to increase automation of the database population process, thereby reducing manual intervention. As a first step, we used Unified Modeling Language (UML) to construct a list of potential errors. Each case was evaluated independently, and an expert solution was devised, and represented as a diagram. Subsequently, the UML diagrams were used as templates for writing object-oriented automation programs in the Java programming language.

An object-oriented extension for debugging the virtual machine

Energy Technology Data Exchange (ETDEWEB)

Pizzi, Jr, Robert G. [Univ. of California, Davis, CA (United States)

1994-12-01

A computer is nothing more then a virtual machine programmed by source code to perform a task. The program`s source code expresses abstract constructs which are compiled into some lower level target language. When a virtual machine breaks, it can be very difficult to debug because typical debuggers provide only low-level target implementation information to the software engineer. We believe that the debugging task can be simplified by introducing aspects of the abstract design and data into the source code. We introduce OODIE, an object-oriented extension to programming languages that allows programmers to specify a virtual environment by describing the meaning of the design and data of a virtual machine. This specification is translated into symbolic information such that an augmented debugger can present engineers with a programmable debugging environment specifically tailored for the virtual machine that is to be debugged.

A Mixed Land Cover Spatio-temporal Data Model Based on Object-oriented and Snapshot

Directory of Open Access Journals (Sweden)

LI Yinchao

2016-07-01

Full Text Available Spatio-temporal data model (STDM is one of the hot topics in the domains of spatio-temporal database and data analysis. There is a common view that a universal STDM is always of high complexity due to the various situation of spatio-temporal data. In this article, a mixed STDM is proposed based on object-oriented and snapshot models for modelling and analyzing landcover change (LCC. This model uses the object-oriented STDM to describe the spatio-temporal processes of land cover patches and organize their spatial and attributive properties. In the meantime, it uses the snapshot STDM to present the spatio-temporal distribution of LCC on the whole via snapshot images. The two types of models are spatially and temporally combined into a mixed version. In addition to presenting the spatio-temporal events themselves, this model could express the transformation events between different classes of spatio-temporal objects. It can be used to create database for historical data of LCC, do spatio-temporal statistics, simulation and data mining with the data. In this article, the LCC data in Heilongjiang province is used for case study to validate spatio-temporal data management and analysis abilities of mixed STDM, including creating database, spatio-temporal query, global evolution analysis and patches spatio-temporal process expression.

A Learning Research Informed Design and Evaluation of a Web-Enhanced Object Oriented Programming Seminar

Science.gov (United States)

Georgantaki, Stavroula C.; Retalis, Symeon D.

2007-01-01

"Object-Oriented Programming" subject is included in the ACM Curriculum Guidelines for Undergraduate and Graduate Degree Programs in Computer Science as well as in Curriculum for K-12 Computer Science. In a few research studies learning problems and difficulties have been recorded, and therefore, specific pedagogical guidelines and…

Automatic pre-processing for an object-oriented distributed hydrological model using GRASS-GIS

Science.gov (United States)

Sanzana, P.; Jankowfsky, S.; Branger, F.; Braud, I.; Vargas, X.; Hitschfeld, N.

2012-04-01

Landscapes are very heterogeneous, which impact the hydrological processes occurring in the catchments, especially in the modeling of peri-urban catchments. The Hydrological Response Units (HRUs), resulting from the intersection of different maps, such as land use, soil types and geology, and flow networks, allow the representation of these elements in an explicit way, preserving natural and artificial contours of the different layers. These HRUs are used as model mesh in some distributed object-oriented hydrological models, allowing the application of a topological oriented approach. The connectivity between polygons and polylines provides a detailed representation of the water balance and overland flow in these distributed hydrological models, based on irregular hydro-landscape units. When computing fluxes between these HRUs, the geometrical parameters, such as the distance between the centroid of gravity of the HRUs and the river network, and the length of the perimeter, can impact the realism of the calculated overland, sub-surface and groundwater fluxes. Therefore, it is necessary to process the original model mesh in order to avoid these numerical problems. We present an automatic pre-processing implemented in the open source GRASS-GIS software, for which several Python scripts or some algorithms already available were used, such as the Triangle software. First, some scripts were developed to improve the topology of the various elements, such as snapping of the river network to the closest contours. When data are derived with remote sensing, such as vegetation areas, their perimeter has lots of right angles that were smoothed. Second, the algorithms more particularly address bad-shaped elements of the model mesh such as polygons with narrow shapes, marked irregular contours and/or the centroid outside of the polygons. To identify these elements we used shape descriptors. The convexity index was considered the best descriptor to identify them with a threshold

Artificial intelligence approach to interwell log correlation

Energy Technology Data Exchange (ETDEWEB)

Lim, Jong-Se [Korea Maritime University, Pusan(Korea); Kang, Joo Myung [Seoul National University, Seoul(Korea); Kim, Jung Whan [Korea National Oil Corp., Anyang(Korea)

2000-04-30

This paper describes a new approach to automated interwell log correlation using artificial intelligence and principal component analysis. The approach to correlate wire line logging data is on the basis of a large set of subjective rules that are intended to represent human logical processes. The data processed are mainly the qualitative information such as the characteristics of the shapes extracted along log traces. The apparent geologic zones are identified by pattern recognition for the specific characteristics of log trace collected as a set of objects by object oriented programming. The correlation of zones between wells is made by rule-based inference program. The reliable correlation can be established from the first principal component logs derived from both the important information around well bore and the largest common part of variances of all available well log data. Correlation with field log data shows that this approach can make interwell log correlation more reliable and accurate. (author). 6 refs., 7 figs.

The Cost of being Object-Oriented: A Preliminary Study

Directory of Open Access Journals (Sweden)

Zoran Budimlić

1999-01-01

Full Text Available Since the introduction of the Java programming language, there has been widespread interest in the use Java for the high performance scientific computing. One major impediment to such use is the performance penalty paid relative to Fortran. To support our research on overcoming this penalty through compiler technology, we have developed a benchmark suite, called OwlPack, which is based on the popular LINPACK library. Although there are existing implementations of LINPACK in Java, most of these are produced by direct translation from Fortran. As such they do not reflect the style of programming that a good object‐oriented programmer would use in Java. Our goal is to investigate how to make object‐oriented scientific programming practical. Therefore we developed two object‐oriented versions of LINPACK in Java, a true polymorphic version and a “Lite” version designed for higher performance. We used these libraries to perform a detailed performance analysis using several leading Java compilers and virtual machines, comparing the performance of the object‐oriented versions of the benchmark with a version produced by direct translation from Fortran. Although Java implementations have been made great strides, they still fall short on programs that use the full power of Java’s object‐oriented features. Our ultimate goal is to drive research on compiler technology that will reward, rather than penalize good object‐oriented programming practice.

Structural damage detection-oriented multi-type sensor placement with multi-objective optimization

Science.gov (United States)

Lin, Jian-Fu; Xu, You-Lin; Law, Siu-Seong

2018-05-01

A structural damage detection-oriented multi-type sensor placement method with multi-objective optimization is developed in this study. The multi-type response covariance sensitivity-based damage detection method is first introduced. Two objective functions for optimal sensor placement are then introduced in terms of the response covariance sensitivity and the response independence. The multi-objective optimization problem is formed by using the two objective functions, and the non-dominated sorting genetic algorithm (NSGA)-II is adopted to find the solution for the optimal multi-type sensor placement to achieve the best structural damage detection. The proposed method is finally applied to a nine-bay three-dimensional frame structure. Numerical results show that the optimal multi-type sensor placement determined by the proposed method can avoid redundant sensors and provide satisfactory results for structural damage detection. The restriction on the number of each type of sensors in the optimization can reduce the searching space in the optimization to make the proposed method more effective. Moreover, how to select a most optimal sensor placement from the Pareto solutions via the utility function and the knee point method is demonstrated in the case study.

Application of an object-oriented programming paradigm in three-dimensional computer modeling of mechanically active gastrointestinal tissues.

Science.gov (United States)

Rashev, P Z; Mintchev, M P; Bowes, K L

2000-09-01

The aim of this study was to develop a novel three-dimensional (3-D) object-oriented modeling approach incorporating knowledge of the anatomy, electrophysiology, and mechanics of externally stimulated excitable gastrointestinal (GI) tissues and emphasizing the "stimulus-response" principle of extracting the modeling parameters. The modeling method used clusters of class hierarchies representing GI tissues from three perspectives: 1) anatomical; 2) electrophysiological; and 3) mechanical. We elaborated on the first four phases of the object-oriented system development life-cycle: 1) analysis; 2) design; 3) implementation; and 4) testing. Generalized cylinders were used for the implementation of 3-D tissue objects modeling the cecum, the descending colon, and the colonic circular smooth muscle tissue. The model was tested using external neural electrical tissue excitation of the descending colon with virtual implanted electrodes and the stimulating current density distributions over the modeled surfaces were calculated. Finally, the tissue deformations invoked by electrical stimulation were estimated and represented by a mesh-surface visualization technique.

An object-oriented and quadrilateral-mesh based solution adaptive algorithm for compressible multi-fluid flows

Science.gov (United States)

Zheng, H. W.; Shu, C.; Chew, Y. T.

2008-07-01

In this paper, an object-oriented and quadrilateral-mesh based solution adaptive algorithm for the simulation of compressible multi-fluid flows is presented. The HLLC scheme (Harten, Lax and van Leer approximate Riemann solver with the Contact wave restored) is extended to adaptively solve the compressible multi-fluid flows under complex geometry on unstructured mesh. It is also extended to the second-order of accuracy by using MUSCL extrapolation. The node, edge and cell are arranged in such an object-oriented manner that each of them inherits from a basic object. A home-made double link list is designed to manage these objects so that the inserting of new objects and removing of the existing objects (nodes, edges and cells) are independent of the number of objects and only of the complexity of O( 1). In addition, the cells with different levels are further stored in different lists. This avoids the recursive calculation of solution of mother (non-leaf) cells. Thus, high efficiency is obtained due to these features. Besides, as compared to other cell-edge adaptive methods, the separation of nodes would reduce the memory requirement of redundant nodes, especially in the cases where the level number is large or the space dimension is three. Five two-dimensional examples are used to examine its performance. These examples include vortex evolution problem, interface only problem under structured mesh and unstructured mesh, bubble explosion under the water, bubble-shock interaction, and shock-interface interaction inside the cylindrical vessel. Numerical results indicate that there is no oscillation of pressure and velocity across the interface and it is feasible to apply it to solve compressible multi-fluid flows with large density ratio (1000) and strong shock wave (the pressure ratio is 10,000) interaction with the interface.

Underwater Object Segmentation Based on Optical Features

Directory of Open Access Journals (Sweden)

Zhe Chen

2018-01-01

Full Text Available Underwater optical environments are seriously affected by various optical inputs, such as artificial light, sky light, and ambient scattered light. The latter two can block underwater object segmentation tasks, since they inhibit the emergence of objects of interest and distort image information, while artificial light can contribute to segmentation. Artificial light often focuses on the object of interest, and, therefore, we can initially identify the region of target objects if the collimation of artificial light is recognized. Based on this concept, we propose an optical feature extraction, calculation, and decision method to identify the collimated region of artificial light as a candidate object region. Then, the second phase employs a level set method to segment the objects of interest within the candidate region. This two-phase structure largely removes background noise and highlights the outline of underwater objects. We test the performance of the method with diverse underwater datasets, demonstrating that it outperforms previous methods.

Method for orienting a borehole core

International Nuclear Information System (INIS)

Henry, W.

1980-01-01

A method is described for longitudinally orienting a borehold core with respect to the longitudinal axis of the drill string which drilled said borehold core in such a manner that the original longitudinal attitude of said borehold core within the earth may be determined. At least a portion of said borehold core is partialy demagnetized in steps to thereby at least partially remove in steps the artificial remanent magnetism imparted to said borehole core by said drill string. The artifical remanent magnetism is oriented substantially parallel to the longitudinal axis of said drill string. The direction and intensity of the total magnetism of said borehold core is measured at desired intervals during the partial demagnetizing procedure. An artificial remanent magnetism vector is established which extends from the final measurement of the direction and intensity of the total magnetism of said borehole core taken during said partial demagnetizing procedure towards the initial measurement of the direction and intensity of the total magnetism of said borehold core taken during said partial demagnetizing procedure. The borehold core is oriented in such a manner that said artificial remanent magnetism vector points at least substantially downwardly towards the bottom of said borehold core for a borehold in the northern hemisphere and points at least substantailly upwardly towards the top of said borehole core for a borehole in the southern hemisphere

RESEARCH ON REMOTE SENSING GEOLOGICAL INFORMATION EXTRACTION BASED ON OBJECT ORIENTED CLASSIFICATION

Directory of Open Access Journals (Sweden)

H. Gao

2018-04-01

Full Text Available The northern Tibet belongs to the Sub cold arid climate zone in the plateau. It is rarely visited by people. The geological working conditions are very poor. However, the stratum exposures are good and human interference is very small. Therefore, the research on the automatic classification and extraction of remote sensing geological information has typical significance and good application prospect. Based on the object-oriented classification in Northern Tibet, using the Worldview2 high-resolution remote sensing data, combined with the tectonic information and image enhancement, the lithological spectral features, shape features, spatial locations and topological relations of various geological information are excavated. By setting the threshold, based on the hierarchical classification, eight kinds of geological information were classified and extracted. Compared with the existing geological maps, the accuracy analysis shows that the overall accuracy reached 87.8561 %, indicating that the classification-oriented method is effective and feasible for this study area and provides a new idea for the automatic extraction of remote sensing geological information.

Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts.

Science.gov (United States)

Fernandes, Henrique; Zhang, Hai; Figueiredo, Alisson; Malheiros, Fernando; Ignacio, Luis Henrique; Sfarra, Stefano; Ibarra-Castanedo, Clemente; Guimaraes, Gilmar; Maldague, Xavier

2018-01-19

The use of fiber reinforced materials such as randomly-oriented strands has grown in recent years, especially for manufacturing of aerospace composite structures. This growth is mainly due to their advantageous properties: they are lighter and more resistant to corrosion when compared to metals and are more easily shaped than continuous fiber composites. The resistance and stiffness of these materials are directly related to their fiber orientation. Thus, efficient approaches to assess their fiber orientation are in demand. In this paper, a non-destructive evaluation method is applied to assess the fiber orientation on laminates reinforced with randomly-oriented strands. More specifically, a method called pulsed thermal ellipsometry combined with an artificial neural network, a machine learning technique, is used in order to estimate the fiber orientation on the surface of inspected parts. Results showed that the method can be potentially used to inspect large areas with good accuracy and speed.

Meanline Analysis of Turbines with Choked Flow in the Object-Oriented Turbomachinery Analysis Code

Science.gov (United States)

Hendricks, Eric S.

2016-01-01

The Object-Oriented Turbomachinery Analysis Code (OTAC) is a new meanline/streamline turbomachinery modeling tool being developed at NASA GRC. During the development process, a limitation of the code was discovered in relation to the analysis of choked flow in axial turbines. This paper describes the relevant physics for choked flow as well as the changes made to OTAC to enable analysis in this flow regime.

Covert orienting in the split brain: Right hemisphere specialization for object-based attention.

Science.gov (United States)

Kingstone, Alan

2015-12-18

The present paper takes as its starting point Phil Bryden's long-standing interest in human attention and the role it can play in laterality effects. Past split-brain research has suggested that object-based attention is lateralized to the left hemisphere [e.g., Egly, R., Rafal, R. D., Driver, J., & Starreveld, Y. (1994). Covert orienting in the split brain reveals hemispheric specialization for object-based attention. Psychological Science, 5(6), 380-382]. The task used to isolate object-based attention in that previous work, however, has been found wanting [Vecera, S. P. (1994). Grouped locations and object-based attention: Comment on Egly, Driver, and Rafal (1994). Journal of Experimental Psychology: General, 123(3), 316-320]; and indeed, subsequent research with healthy participants using a different task has suggested that object-based attention is lateralized to the opposite right hemisphere (RH) [Valsangkar-Smyth, M. A., Donovan, C. L., Sinnett, S., Dawson, M. R., & Kingstone, A. (2004). Hemispheric performance in object-based attention. Psychonomic Bulletin & Review, 11(1), 84-91]. The present study tested the same split-brain as Egly, Rafal, et al. (1994) but used the object-based attention task introduced by Valsangkar-Smyth et al. (2004). The results confirm that object-based attention is lateralized to the RH. They also suggest that subcortical interhemispheric competition may occur and be dominated by the RH.

Multi-User Domain Object Oriented (MOO) as a High School Procedure for Foreign Language Acquisition.

Science.gov (United States)

Backer, James A.

Foreign language students experience added difficulty when they are isolated from native speakers and from the culture of the target language. It has been posited that MOO (Multi-User Domain Object Oriented) may help overcome the geographical isolation of these students. MOOs are Internet-based virtual worlds in which people from all over the real…

Object-relational database design-exploiting object orientation at the ...

African Journals Online (AJOL)

This paper applies the object-relational database paradigm in the design of a Health Management Information System. The class design, mapping of object classes to relational tables, the representation of inheritance hierarchies, and the appropriate database schema are all examined. Keywords: object relational ...

OBJECT ORIENTED MODELLING, A MODELLING METHOD OF AN ECONOMIC ORGANIZATION ACTIVITY

Directory of Open Access Journals (Sweden)

TĂNĂSESCU ANA

2014-05-01

Full Text Available Now, most economic organizations use different information systems types in order to facilitate their activity. There are different methodologies, methods and techniques that can be used to design information systems. In this paper, I propose to present the advantages of using the object oriented modelling at the information system design of an economic organization. Thus, I have modelled the activity of a photo studio, using Visual Paradigm for UML as a modelling tool. For this purpose, I have identified the use cases for the analyzed system and I have presented the use case diagram. I have, also, realized the system static and dynamic modelling, through the most known UML diagrams.

An Improved Artificial Bee Colony Algorithm and Its Application to Multi-Objective Optimal Power Flow

Directory of Open Access Journals (Sweden)

Xuanhu He

2015-03-01

Full Text Available Optimal power flow (OPF objective functions involve minimization of the total fuel costs of generating units, minimization of atmospheric pollutant emissions, minimization of active power losses and minimization of voltage deviations. In this paper, a fuzzy multi-objective OPF model is established by the fuzzy membership functions and the fuzzy satisfaction-maximizing method. The improved artificial bee colony (IABC algorithm is applied to solve the model. In the IABC algorithm, the mutation and crossover operations of a differential evolution algorithm are utilized to generate new solutions to improve exploitation capacity; tent chaos mapping is utilized to generate initial swarms, reference mutation solutions and the reference dimensions of crossover operations to improve swarm diversity. The proposed method is applied to multi-objective OPF problems in IEEE 30-bus, IEEE 57-bus and IEEE 300-bus test systems. The results are compared with those obtained by other algorithms, which demonstrates the effectiveness and superiority of the IABC algorithm, and how the optimal scheme obtained by the proposed model can make systems more economical and stable.

Use of artificial neural networks and geographic objects for classifying remote sensing imagery

Directory of Open Access Journals (Sweden)

Pedro Resende Silva

2014-06-01

Full Text Available The aim of this study was to develop a methodology for mapping land use and land cover in the northern region of Minas Gerais state, where, in addition to agricultural land, the landscape is dominated by native cerrado, deciduous forests, and extensive areas of vereda. Using forest inventory data, as well as RapidEye, Landsat TM and MODIS imagery, three specific objectives were defined: 1 to test use of image segmentation techniques for an object-based classification encompassing spectral, spatial and temporal information, 2 to test use of high spatial resolution RapidEye imagery combined with Landsat TM time series imagery for capturing the effects of seasonality, and 3 to classify data using Artificial Neural Networks. Using MODIS time series and forest inventory data, time signatures were extracted from the dominant vegetation formations, enabling selection of the best periods of the year to be represented in the classification process. Objects created with the segmentation of RapidEye images, along with the Landsat TM time series images, were classified by ten different Multilayer Perceptron network architectures. Results showed that the methodology in question meets both the purposes of this study and the characteristics of the local plant life. With excellent accuracy values for native classes, the study showed the importance of a well-structured database for classification and the importance of suitable image segmentation to meet specific purposes.

Astrophysical Information from Objective Prism Digitized Images: Classification with an Artificial Neural Network

Directory of Open Access Journals (Sweden)

Bratsolis Emmanuel

2005-01-01

Full Text Available Stellar spectral classification is not only a tool for labeling individual stars but is also useful in studies of stellar population synthesis. Extracting the physical quantities from the digitized spectral plates involves three main stages: detection, extraction, and classification of spectra. Low-dispersion objective prism images have been used and automated methods have been developed. The detection and extraction problems have been presented in previous works. In this paper, we present a classification method based on an artificial neural network (ANN. We make a brief presentation of the entire automated system and we compare the new classification method with the previously used method of maximum correlation coefficient (MCC. Digitized photographic material has been used here. The method can also be used on CCD spectral images.

An object-oriented-database-system to assist control room staff

Energy Technology Data Exchange (ETDEWEB)

Schildt, G H [Vienna Univ. of Technology, Vienna (Austria). Inst. for Automation

1997-12-31

In order to assist control room staff of failure of any electrical or mechanical component a new objects-oriented-database-system (OODBS) has been developed and installed. Monitoring and diagnostics may be supported by this OODBS within a well-defined response time. The operator gets a report on different levels: For example, at a first level data about the vendor of a device (like reactor vessel internals, pumps, valves, etc.), data of installation, history of failures since installation, at a second level e.g. technical data of the device, at a next level e.g. a scanned photo of the device with its identification number within a certain compartment, and at another level using a CAD-system presenting technical drawings and corresponding part lists in order to assist necessary communication between operator and maintenance technician. (author). 3 refs, 10 figs.

An object-oriented-database-system to assist control room staff

International Nuclear Information System (INIS)

Schildt, G.H.

1996-01-01

In order to assist control room staff of failure of any electrical or mechanical component a new objects-oriented-database-system (OODBS) has been developed and installed. Monitoring and diagnostics may be supported by this OODBS within a well-defined response time. The operator gets a report on different levels: For example, at a first level data about the vendor of a device (like reactor vessel internals, pumps, valves, etc.), data of installation, history of failures since installation, at a second level e.g. technical data of the device, at a next level e.g. a scanned photo of the device with its identification number within a certain compartment, and at another level using a CAD-system presenting technical drawings and corresponding part lists in order to assist necessary communication between operator and maintenance technician. (author). 3 refs, 10 figs

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs.

Science.gov (United States)

Zheng, G; Tannast, M; Anderegg, C; Siebenrock, K A; Langlotz, F

2007-07-01

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Automation of fusion first wall design using artificial intelligence technique

International Nuclear Information System (INIS)

Yoshimura, Shinobu; Yagawa, Genki; Mochizuki, Yoshihiko

1990-01-01

This paper describes the application of artificial intelligence techniques to a design automation of the fusion first wall to be operated in the complex environment where huge electromagnetic and thermal loading as well as heavy neutron irradiation occur. As a basic strategy of designing structure shape considering many coupled phenomena, an ordinary design procedure based on the generate and test strategy is adopted because of its simplicity and broad applicability. To automate the design procedure with maintaining its flexibility, extensibility and efficiency, artificial intelligence techniques are utilized in the following. An object-oriented knowledge representation technique is adopted to store knowledge modules, that is, objects, related to the first wall design, while a data-flow processing technique is utilized as an inference mechanism among the knowledge modules. These techniques realize the flexibility and extensibility of the system. Moreover, as an efficient design modification mechanism, which is essential in a design process, an empirical approach based on experts' empirical knowledge and a mathematical approach based on a kind of numerical sensitivity analysis are introduced. The developed system is applied to a simple example of the design of a two-dimensional model of the first wall with a cooling channel, and its fundamental performance is clearly demonstrated. (author)

Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts

Science.gov (United States)

Maldague, Xavier

2018-01-01

The use of fiber reinforced materials such as randomly-oriented strands has grown in recent years, especially for manufacturing of aerospace composite structures. This growth is mainly due to their advantageous properties: they are lighter and more resistant to corrosion when compared to metals and are more easily shaped than continuous fiber composites. The resistance and stiffness of these materials are directly related to their fiber orientation. Thus, efficient approaches to assess their fiber orientation are in demand. In this paper, a non-destructive evaluation method is applied to assess the fiber orientation on laminates reinforced with randomly-oriented strands. More specifically, a method called pulsed thermal ellipsometry combined with an artificial neural network, a machine learning technique, is used in order to estimate the fiber orientation on the surface of inspected parts. Results showed that the method can be potentially used to inspect large areas with good accuracy and speed. PMID:29351240

Extraction and Analysis of Mega Cities’ Impervious Surface on Pixel-based and Object-oriented Support Vector Machine Classification Technology: A case of Bombay

Science.gov (United States)

Yu, S. S.; Sun, Z. C.; Sun, L.; Wu, M. F.

2017-02-01

The object of this paper is to study the impervious surface extraction method using remote sensing imagery and monitor the spatiotemporal changing patterns of mega cities. Megacity Bombay was selected as the interesting area. Firstly, the pixel-based and object-oriented support vector machine (SVM) classification methods were used to acquire the land use/land cover (LULC) products of Bombay in 2010. Consequently, the overall accuracy (OA) and overall Kappa (OK) of the pixel-based method were 94.97% and 0.96 with a running time of 78 minutes, the OA and OK of the object-oriented method were 93.72% and 0.94 with a running time of only 17s. Additionally, OA and OK of the object-oriented method after a post-classification were improved up to 95.8% and 0.94. Then, the dynamic impervious surfaces of Bombay in the period 1973-2015 were extracted and the urbanization pattern of Bombay was analysed. Results told that both the two SVM classification methods could accomplish the impervious surface extraction, but the object-oriented method should be a better choice. Urbanization of Bombay experienced a fast extending during the past 42 years, implying a dramatically urban sprawl of mega cities in the developing countries along the One Belt and One Road (OBOR).

Radar Plant and Measurement Technique for Determination of the Orientation and the Depth of Buried Objects

DEFF Research Database (Denmark)

1999-01-01

A plant for generation of information indicative of the depth and the orientation of an object positioned below the surface of the ground is adapted to use electromagnetic radiation emitted from and received by an antenna system associated with the plant. The plant has a transmitter and a receive...

ARACHNID: A prototype object-oriented database tool for distributed systems

Science.gov (United States)

Younger, Herbert; Oreilly, John; Frogner, Bjorn

1994-01-01

This paper discusses the results of a Phase 2 SBIR project sponsored by NASA and performed by MIMD Systems, Inc. A major objective of this project was to develop specific concepts for improved performance in accessing large databases. An object-oriented and distributed approach was used for the general design, while a geographical decomposition was used as a specific solution. The resulting software framework is called ARACHNID. The Faint Source Catalog developed by NASA was the initial database testbed. This is a database of many giga-bytes, where an order of magnitude improvement in query speed is being sought. This database contains faint infrared point sources obtained from telescope measurements of the sky. A geographical decomposition of this database is an attractive approach to dividing it into pieces. Each piece can then be searched on individual processors with only a weak data linkage between the processors being required. As a further demonstration of the concepts implemented in ARACHNID, a tourist information system is discussed. This version of ARACHNID is the commercial result of the project. It is a distributed, networked, database application where speed, maintenance, and reliability are important considerations. This paper focuses on the design concepts and technologies that form the basis for ARACHNID.

Object Knowledge Modulates Colour Appearance

Directory of Open Access Journals (Sweden)

Christoph Witzel

2011-01-01

Full Text Available We investigated the memory colour effect for colour diagnostic artificial objects. Since knowledge about these objects and their colours has been learned in everyday life, these stimuli allow the investigation of the influence of acquired object knowledge on colour appearance. These investigations are relevant for questions about how object and colour information in high-level vision interact as well as for research about the influence of learning and experience on perception in general. In order to identify suitable artificial objects, we developed a reaction time paradigm that measures (subjective colour diagnosticity. In the main experiment, participants adjusted sixteen such objects to their typical colour as well as to grey. If the achromatic object appears in its typical colour, then participants should adjust it to the opponent colour in order to subjectively perceive it as grey. We found that knowledge about the typical colour influences the colour appearance of artificial objects. This effect was particularly strong along the daylight axis.

Object knowledge modulates colour appearance

Science.gov (United States)

Witzel, Christoph; Valkova, Hanna; Hansen, Thorsten; Gegenfurtner, Karl R

2011-01-01

We investigated the memory colour effect for colour diagnostic artificial objects. Since knowledge about these objects and their colours has been learned in everyday life, these stimuli allow the investigation of the influence of acquired object knowledge on colour appearance. These investigations are relevant for questions about how object and colour information in high-level vision interact as well as for research about the influence of learning and experience on perception in general. In order to identify suitable artificial objects, we developed a reaction time paradigm that measures (subjective) colour diagnosticity. In the main experiment, participants adjusted sixteen such objects to their typical colour as well as to grey. If the achromatic object appears in its typical colour, then participants should adjust it to the opponent colour in order to subjectively perceive it as grey. We found that knowledge about the typical colour influences the colour appearance of artificial objects. This effect was particularly strong along the daylight axis. PMID:23145224

Woodland Mapping at Single-Tree Levels Using Object-Oriented Classification of Unmanned Aerial Vehicle (uav) Images

Science.gov (United States)

Chenari, A.; Erfanifard, Y.; Dehghani, M.; Pourghasemi, H. R.

2017-09-01

Remotely sensed datasets offer a reliable means to precisely estimate biophysical characteristics of individual species sparsely distributed in open woodlands. Moreover, object-oriented classification has exhibited significant advantages over different classification methods for delineation of tree crowns and recognition of species in various types of ecosystems. However, it still is unclear if this widely-used classification method can have its advantages on unmanned aerial vehicle (UAV) digital images for mapping vegetation cover at single-tree levels. In this study, UAV orthoimagery was classified using object-oriented classification method for mapping a part of wild pistachio nature reserve in Zagros open woodlands, Fars Province, Iran. This research focused on recognizing two main species of the study area (i.e., wild pistachio and wild almond) and estimating their mean crown area. The orthoimage of study area was consisted of 1,076 images with spatial resolution of 3.47 cm which was georeferenced using 12 ground control points (RMSE=8 cm) gathered by real-time kinematic (RTK) method. The results showed that the UAV orthoimagery classified by object-oriented method efficiently estimated mean crown area of wild pistachios (52.09±24.67 m2) and wild almonds (3.97±1.69 m2) with no significant difference with their observed values (α=0.05). In addition, the results showed that wild pistachios (accuracy of 0.90 and precision of 0.92) and wild almonds (accuracy of 0.90 and precision of 0.89) were well recognized by image segmentation. In general, we concluded that UAV orthoimagery can efficiently produce precise biophysical data of vegetation stands at single-tree levels, which therefore is suitable for assessment and monitoring open woodlands.

Design of an Object-Oriented Turbomachinery Analysis Code: Initial Results

Science.gov (United States)

Jones, Scott M.

2015-01-01

Performance prediction of turbomachines is a significant part of aircraft propulsion design. In the conceptual design stage, there is an important need to quantify compressor and turbine aerodynamic performance and develop initial geometry parameters at the 2-D level prior to more extensive Computational Fluid Dynamics (CFD) analyses. The Object-oriented Turbomachinery Analysis Code (OTAC) is being developed to perform 2-D meridional flowthrough analysis of turbomachines using an implicit formulation of the governing equations to solve for the conditions at the exit of each blade row. OTAC is designed to perform meanline or streamline calculations; for streamline analyses simple radial equilibrium is used as a governing equation to solve for spanwise property variations. While the goal for OTAC is to allow simulation of physical effects and architectural features unavailable in other existing codes, it must first prove capable of performing calculations for conventional turbomachines. OTAC is being developed using the interpreted language features available in the Numerical Propulsion System Simulation (NPSS) code described by Claus et al (1991). Using the NPSS framework came with several distinct advantages, including access to the pre-existing NPSS thermodynamic property packages and the NPSS Newton-Raphson solver. The remaining objects necessary for OTAC were written in the NPSS framework interpreted language. These new objects form the core of OTAC and are the BladeRow, BladeSegment, TransitionSection, Expander, Reducer, and OTACstart Elements. The BladeRow and BladeSegment consumed the initial bulk of the development effort and required determining the equations applicable to flow through turbomachinery blade rows given specific assumptions about the nature of that flow. Once these objects were completed, OTAC was tested and found to agree with existing solutions from other codes; these tests included various meanline and streamline comparisons of axial