WorldWideScience

Sample records for nutrition board assembly

  1. Improving intrinsic corrosion reliability of printed circuit board assembly

    DEFF Research Database (Denmark)

    Ambat, Rajan; Conseil, Helene

    2016-01-01

    conditions, therefore the protection of electronic devices is becoming a critical factor in system design. Humidity and local condensation inside electronic enclosures can significantly alter the performance of electronic devices. The presence of moisture in a PCB alters its quality, functionality, thermal...... performance, and thermo-mechanical properties, while condensation on the surface of printed circuit board assemblies (PCBAs) can lead to electrical failures, like electrochemical migration. The result is reduced life span for electronic products and heavy economic loss due to failures....

  2. NUTRITIONAL STATUS IN BLIND CHILDREN: ISFAHAN ABABASIR BOARDING SCHOOL

    Directory of Open Access Journals (Sweden)

    M RAJAI

    2001-06-01

    Full Text Available Introduction: Inadequate dietary intake causes malnutrition associated with poor physical and mental development, specially in children. This study evaluated the nutritional status in blind children in Ababasir Boarding Center (a boarding school in Isfahan city. Methods: A 72 hours food regimen survey was measured in 50 subjects (boys and girls by weighting method. The anthropometric data was collected to compare with NCHS normal data. Results: Energy intake was less than 75 percent RDA in all the subjects and the amounts of animal protein intake was also little. Chronic malnutrition was more prevalent. Discussion: Althought the energy intake was lower than RDA, but it did not cause under weight among them probably because of reduced physical activity due to their disability and inadequate high quality protein and other nutrients probably could be the major cause in chronic malnutrition.

  3. Board-to-Board Free-Space Optical Interconnections Passing through Boards for a Bookshelf-Assembled Terabit-Per-Second-Class ATM Switch.

    Science.gov (United States)

    Hirabayashi, K; Yamamoto, T; Matsuo, S; Hino, S

    1998-05-10

    We propose free-space optical interconnections for a bookshelf-assembled terabit-per-second-class ATM switch. Thousands of arrayed optical beams, each having a rate of a few gigabits per second, propagate vertically to printed circuit boards, passing through some boards, and are connected to arbitrary transmitters and receivers on boards by polarization controllers and prism arrays. We describe a preliminary experiment using a 1-mm-pitch 2 x 2 beam-collimator array that uses vertical-cavity surface-emitting laser diodes. These optical interconnections can be made quite stable in terms of mechanical shock and temperature fluctuation by the attachment of reinforcing frames to the boards and use of an autoalignment system.

  4. Effect of ionic contamination on climatic reliability of printed circuit board assemblies

    DEFF Research Database (Denmark)

    Verdingovas, Vadimas; Jellesen, Morten Stendahl; Ambat, Rajan

    2012-01-01

    The effect of NaCl and weak organic acids (WOAs) in “no-clean” wave solder flux residues was studied on electrochemical migration (ECM), leakage current, and corrosion on surface mount chip capacitors using a test printed circuit board assembly (PCBA) substrate having known chip components...

  5. Effect of solder flux residue on the performance of silicone conformal coatings on printed circuit board assemblies

    DEFF Research Database (Denmark)

    Rathinavelu, Umadevi; Jellesen, Morten Stendahl; Ambat, Rajan

    2013-01-01

    Conformal coatings are applied on printed circuit board assemblies (PCBAs) in order to protect the assembly from environmental influence and silicone-based coating is commonly used. A systematic study on the performance of silicone conformal coating in connection with process-related contaminants...

  6. Contamination profile on typical printed circuit board assemblies vs soldering process

    DEFF Research Database (Denmark)

    Conseil, Helene; Jellesen, Morten Stendahl; Ambat, Rajan

    2014-01-01

    Purpose – The purpose of this paper was to analyse typical printed circuit board assemblies (PCBAs) processed by reflow, wave or selective wave soldering for typical levels of process-related residues, resulting from a specific or combination of soldering processes. Typical solder flux residue...... structure was identified by Fourier transform infrared spectroscopy, while the concentration was measured using ion chromatography, and the electrical properties of the extracts were determined by measuring the leak current using a twin platinum electrode set-up. Localized extraction of residue was carried...

  7. Contamination profile of Printed Circuit Board Assemblies in relation to soldering types and conformal coating

    DEFF Research Database (Denmark)

    Conseil, Helene; Jellesen, Morten Stendahl; Ambat, Rajan

    2014-01-01

    Typical printed circuit board assemblies (PCBAs) processed by reflow, wave, or selective wave soldering were analysed for typical levels of process related residues, resulting from a specific or combination of soldering process. Typical solder flux residue distribution pattern, composition......, and concentration are profiled and reported. Presence of localized flux residues were visualized using a commercial Residue RAT gel test and chemical structure was identified by FT-IR, while the concentration was measured using ion chromatography, and the electrical properties of the extracts were determined...

  8. Reliability of CGA/LGA/HDI Package Board/Assembly (Final Report)

    Science.gov (United States)

    Ghaffaroam. Reza

    2014-01-01

    Package manufacturers are now offering commercial-off-the-shelf column grid array (COTS CGA) packaging technologies in high-reliability versions. Understanding the process and quality assurance (QA) indicators for reliability are important for low-risk insertion of these advanced electronics packages. The previous reports, released in January of 2012 and January of 2013, presented package test data, assembly information, and reliability evaluation by thermal cycling for CGA packages with 1752, 1517, 1509, and 1272 inputs/outputs (I/Os) and 1-mm pitch. It presented the thermal cycling (-55C either 100C or 125C) test results for up to 200 cycles. This report presents up to 500 thermal cycles with quality assurance and failure analysis evaluation represented by optical photomicrographs, 2D real time X-ray images, dye-and-pry photomicrographs, and optical/scanning electron Microscopy (SEM) cross-sectional images. The report also presents assembly challenge using reflowing by either vapor phase or rework station of CGA and land grid array (LGA) versions of three high I/O packages both ceramic and plastic configuration. A new test vehicle was designed having high density interconnect (HDI) printed circuit board (PCB) with microvia-in-pad to accommodate both LGA packages as well as a large number of fine pitch ball grid arrays (BGAs). The LGAs either were assembled onto HDI PCB as an LGA or were solder paste print and reflow first to form solder dome on pads before assembly. Both plastic BGAs with 1156 I/O and ceramic LGAs were assembled. It also presented the X-ray inspection results as well as failures due to 200 thermal cycles. Lessons learned on assembly of ceramic LGAs are also presented.

  9. Endurance of lead-free assembly under board level drop test and thermal cycling

    Energy Technology Data Exchange (ETDEWEB)

    Xia Yanghua [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)], E-mail: xia_yanghua@hotmail.com; Xie Xiaoming [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)

    2008-06-12

    The reliability of lead-free electronic assemblies under board level drop test and thermal cycling was investigated. TSOP (thin small outline package) devices with FeNi leads were reflow soldered on FR4 PCB (printed circuit board) with Sn3.0Ag0.5Cu (wt%) solder. The effects of different PCB finishes (organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG)) on the reliability performance were studied. The results show that the assemblies with ENIG finishes reveal better reliability performance than its OSP counterparts under drop test, however, the OSP samples outperform those with ENIG finishes under thermal cycling. The failure mechanism is different under these two test conditions: the solder joints fracture into the intermetallic compounds (IMCs) layer under drop test, and cracks initiate in the bulk solder under thermal cycling. The surface finishes have an effect on the failure mode. The propagation of crack in the ENIG case is along the device/solder interface, while in the case of OSP, the crack extends parallel to the solder/PCB interface.

  10. Optimization of a readout board for mass assembly and light yield measurements with a cosmic ray test stand

    Energy Technology Data Exchange (ETDEWEB)

    Chau, Phi [Johannes Gutenberg-Universitaet Mainz, Institut fuer Physik (Germany); Collaboration: CALICE-D-Collaboration

    2016-07-01

    We have built a readout board prototype, equipped with SiPMs, scintillators and readout electronics for an highly granular calorimeter. The design was optimized for mass assembly due to about 8 million channels in the final detector. The prototype showed good performance in several test beams and in a cosmic ray test stand, which was built to characterize the MIP response of these kinds of boards. We show an overview of the cosmic ray test stand and measurement results for the readout board and plans for an improved 2nd generation prototype.

  11. How the Nutritional Foods in the Schools Committee of the Sudbury Board of Education Developed a Food Services Policy.

    Science.gov (United States)

    Yackman, Bernardine

    This paper chronicles the attempt by the Sudbury Board of Education (Ontario) to minimize the addiction of the children and teenagers in its schools to "junk foods." The plan involved the teaching of good eating habits and the principles of nutrition in food choices. The program used a variety of pedagogical and merchandising strategies to effect…

  12. Impact of NaCl Contamination and Climatic Conditions on the Reliability of Printed Circuit Board Assemblies

    DEFF Research Database (Denmark)

    Verdingovas, Vadimas; Jellesen, Morten Stendahl; Ambat, Rajan

    2014-01-01

    The effect of climatic conditions and ionic contamination on the reliability of printed circuit board assembly has been investigated in terms of leakage current (LC) and electrochemical migration susceptibility. The change in LC as a function of relative humidity (RH) and temperature was measured...... and 15 $^{\\circ}\\hbox{C}$ –65 $^{\\circ}\\hbox{C}$. The variation of RH at the surface of the test specimens was imposed by 1) increasing the RH of the surrounding air and 2) reducing the temperature of the printed circuit boards using a cooling stage, while maintaining a constant climatic condition...

  13. Assembling surface mounted components on ink-jet printed double sided paper circuit board

    International Nuclear Information System (INIS)

    Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Sidén, Johan; Nilsson, Hans-Erik; Hummelgård, Magnus; Olin, Håkan; Hummelgård, Christine

    2014-01-01

    Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed. (paper)

  14. Assembling surface mounted components on ink-jet printed double sided paper circuit board.

    Science.gov (United States)

    Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Hummelgård, Magnus; Sidén, Johan; Hummelgård, Christine; Olin, Håkan; Nilsson, Hans-Erik

    2014-03-07

    Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed.

  15. Assembling surface mounted components on ink-jet printed double sided paper circuit board

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Sidén, Johan; Nilsson, Hans-Erik [Department of Electronics Design, Mid Sweden University, SE-851 70 Sundsvall (Sweden); Hummelgård, Magnus; Olin, Håkan [Department of Natural Science, Mid Sweden University, SE-851 70 Sundsvall (Sweden); Hummelgård, Christine [Acreo Swedish ICT AB, Håstaholmen 4, SE-824 42 Hudiksvall (Sweden)

    2014-03-07

    Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed. (paper)

  16. The Performance of Calcium Silicate Board Partition Fireproof Drywall Assembly with Junction Box under Fire

    Directory of Open Access Journals (Sweden)

    Yinuo Wang

    2015-01-01

    Full Text Available This study uses a metal stud partition fireproof drywall measuring 83 mm in thickness as a test specimen to explore the impact of an embedded junction box on the firefighting performance of the wall through one time of standard fire test on a 300 cm × 300 cm area and five times of standard fire test on a 120 cm × 120 cm area. The results show that the quality of calcium silicate board plays a big role in the fireproof effectiveness. The embedded junction box located on the backside of the fire can reduce the effectiveness of the wall, especially the area above the socket. The thickness of rock wool may increase the performance, but in a limited rate. External junction box may not impact the fireproofing performance of the wall but it still possesses some safety risks. An embedded junction box measuring 101 × 55 mm could already damage the fire compartment, and in reality there may be more complicated situations that should be noted and improved.

  17. The best of two worlds: how the Greenland Board of Nutrition has handled conflicting evidence about diet and health

    Directory of Open Access Journals (Sweden)

    Peter Bjerregaard

    2012-07-01

    Full Text Available The traditional diet in Greenland consists to a large extent of meat and organs of seal and other marine mammals, which is polluted by POPs and mercury. These substances are present in the blood of Greenlanders in concentrations well above international guidelines, and as these contaminants are suspected of having negative impacts on health, some action should be taken. On the other hand, traditional food is also an important source of health promoting micronutrients that are not provided by imported food in sufficient quantities, for example vitamin D, long chain n-3 fatty acids, and selenium, not to mention the traditional diet's function as a social glue that is perceived as important for Inuit identity in Greenland. The proportion of the total diet that comes from marine mammals is on a constant decrease, and especially children and young adults consume rather little seal and whale. The traditional food items are consequently being replaced by imported food, and among the imported food items several rather unhealthy items are popular, that is carbonated soft drinks with sugar, sweets, chips and farmed (red meat with a high content of saturated fat. Together with a decrease in physical activity, this dietary transition has resulted in a severe epidemic of overweight and diabetes. In giving advice to the public, the Greenland Board of Nutrition was therefore faced with the challenge to retain the benefits of the traditional diet while minimizing the contaminant exposure, and at the same time to counteract the effects of poor quality imported food. The Board tried to balance the known and suspected positive and negative aspects of the total diet in relation not only to physical health but to general wellbeing, and decided on 10 simple recommendations. As the consumption of traditional food becomes less prominent and as the consumption of food rich in empty calories increases, the guidelines are continuously revised and updated.

  18. The best of two worlds: how the Greenland Board of Nutrition has handled conflicting evidence about diet and health.

    Science.gov (United States)

    Bjerregaard, Peter; Mulvad, Gert

    2012-07-10

    The traditional diet in Greenland consists to a large extent of meat and organs of seal and other marine mammals, which is polluted by POPs and mercury. These substances are present in the blood of Greenlanders in concentrations well above international guidelines, and as these contaminants are suspected of having negative impacts on health, some action should be taken. On the other hand, traditional food is also an important source of health promoting micronutrients that are not provided by imported food in sufficient quantities, for example vitamin D, long chain n-3 fatty acids, and selenium, not to mention the traditional diet's function as a social glue that is perceived as important for Inuit identity in Greenland. The proportion of the total diet that comes from marine mammals is on a constant decrease, and especially children and young adults consume rather little seal and whale. The traditional food items are consequently being replaced by imported food, and among the imported food items several rather unhealthy items are popular, that is carbonated soft drinks with sugar, sweets, chips and farmed (red) meat with a high content of saturated fat. Together with a decrease in physical activity, this dietary transition has resulted in a severe epidemic of overweight and diabetes. In giving advice to the public, the Greenland Board of Nutrition was therefore faced with the challenge to retain the benefits of the traditional diet while minimizing the contaminant exposure, and at the same time to counteract the effects of poor quality imported food. The Board tried to balance the known and suspected positive and negative aspects of the total diet in relation not only to physical health but to general wellbeing, and decided on 10 simple recommendations. As the consumption of traditional food becomes less prominent and as the consumption of food rich in empty calories increases, the guidelines are continuously revised and updated.

  19. [Endocrinology in Portugal - Census 2016. Board of the Portuguese College of Endocrinology and Nutrition of the Portuguese Medical Association].

    Science.gov (United States)

    Guimarães, Joana; Afonso, António; Carvalho, Davide; Marques, Ana Paula; Martins, Teresa; Mascarenhas, Mário Rui; Pereira, Conceição; Rodrigues, Dírcea; Saraiva, Catarina; Cardoso, Helena

    2017-09-29

    On September 2016, the Board of the College of Endocrinology and Nutrition of the Portuguese Medical Association carried out a national survey, about all Endocrinology, Diabetes and Metabolism Departments of the public hospitals included in the Portuguese National Health Service and a simplified version of this survey was sent to all endocrinologists working in Portugal and registered with the Portuguese Medical Association. Data related to organizational and human resources were collected, reporting the situation by the end of year 2015. The census registered 107 individuals and 27 Departments. The ratio of endocrinologists-population was 1.4, much lower than in the other European countries (varies between 2 to 4), resulting in alarming shortages of services in some areas of Portugal and in worse quality indicators. These data suggest that actions should be taken to increase the number of endocrinologists and departments in the country. In recent years, the number of residents has significantly increased, which will make it possible to correct this situation.

  20. Nutrition

    Science.gov (United States)

    ... of States, Districts, and Schools That Required Teaching Nutrition and Dietary Behavior, by School Level 100 80 60 40 20 0 72. ... no comparable variable existed in both survey years. Nutrition Services • 68.6% of schools offered breakfast to students and 63.0% participated ...

  1. THERMAL DIAGNOSTICS WITH THE ATMOSPHERIC IMAGING ASSEMBLY ON BOARD THE SOLAR DYNAMICS OBSERVATORY: A VALIDATED METHOD FOR DIFFERENTIAL EMISSION MEASURE INVERSIONS

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, Mark C. M.; Boerner, P.; Schrijver, C. J.; Malanushenko, A. [Lockheed Martin Solar and Astrophysics Laboratory, 3251 Hanover Street Bldg. 252, Palo Alto, CA 94304 (United States); Testa, P. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Chen, F.; Peter, H., E-mail: cheung@lmsal.com [Max Planck Institute for Solar System Research, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany)

    2015-07-10

    We present a new method for performing differential emission measure (DEM) inversions on narrow-band EUV images from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory. The method yields positive definite DEM solutions by solving a linear program. This method has been validated against a diverse set of thermal models of varying complexity and realism. These include (1) idealized Gaussian DEM distributions, (2) 3D models of NOAA Active Region 11158 comprising quasi-steady loop atmospheres in a nonlinear force-free field, and (3) thermodynamic models from a fully compressible, 3D MHD simulation of active region (AR) corona formation following magnetic flux emergence. We then present results from the application of the method to AIA observations of Active Region 11158, comparing the region's thermal structure on two successive solar rotations. Additionally, we show how the DEM inversion method can be adapted to simultaneously invert AIA and Hinode X-ray Telescope data, and how supplementing AIA data with the latter improves the inversion result. The speed of the method allows for routine production of DEM maps, thus facilitating science studies that require tracking of the thermal structure of the solar corona in time and space.

  2. Kaledo, a board game for nutrition education of children and adolescents at school: cluster randomized controlled trial of healthy lifestyle promotion.

    Science.gov (United States)

    Viggiano, Alessandro; Viggiano, Emanuela; Di Costanzo, Anna; Viggiano, Andrea; Andreozzi, Eleonora; Romano, Vincenzo; Rianna, Ines; Vicidomini, Claudia; Gargano, Giuliana; Incarnato, Lucia; Fevola, Celeste; Volta, Pietro; Tolomeo, Caterina; Scianni, Giuseppina; Santangelo, Caterina; Battista, Roberta; Monda, Marcellino; Viggiano, Adela; De Luca, Bruno; Amaro, Salvatore

    2015-02-01

    During childhood and adolescence, a game could be an effective educational tool to learn healthy eating habits. We developed Kaledo, a new board game, to promote nutrition education and to improve dietary behavior. A two-group design with one pre-treatment assessment and two post-treatment assessments was employed. A total of 3,110 subjects (9-19 years old) from 20 schools in Campania, Italy, were included in the trial. In the treated group, the game was introduced each week over 20 consecutive weeks. Control group did not receive any intervention. The primary outcomes were (i) score on the "Adolescent Food Habits Checklist" (AFHC), (ii) scores on a dietary questionnaire, and (iii) BMI z-score. At the first post-assessment (6 months), the treated group obtained significantly higher scores than the control group on the AFHC (14.4 (95 % confidence interval (CI) 14.0 to 14.8) vs 10.9 (95 % CI 10.6 to -11.2); F(1,20) = 72.677; p childhood and adolescence obesity prevention programs.

  3. Effects of PCB Pad Metal Finishes on the Cu-Pillar/Sn-Ag Micro Bump Joint Reliability of Chip-on-Board (COB) Assembly

    Science.gov (United States)

    Kim, Youngsoon; Lee, Seyong; Shin, Ji-won; Paik, Kyung-Wook

    2016-06-01

    While solder bumps have been used as the bump structure to form the interconnection during the last few decades, the continuing scaling down of devices has led to a change in the bump structure to Cu-pillar/Sn-Ag micro-bumps. Cu-pillar/Sn-Ag micro-bump interconnections differ from conventional solder bump interconnections in terms of their assembly processing and reliability. A thermo-compression bonding method with pre-applied b-stage non-conductive films has been adopted to form solder joints between Cu pillar/Sn-Ag micro bumps and printed circuit board vehicles, using various pad metal finishes. As a result, various interfacial inter-metallic compounds (IMCs) reactions and stress concentrations occur at the Cu pillar/Sn-Ag micro bumps joints. Therefore, it is necessary to investigate the influence of pad metal finishes on the structural reliability of fine pitch Cu pillar/Sn-Ag micro bumps flip chip packaging. In this study, four different pad surface finishes (Thin Ni ENEPIG, OSP, ENEPIG, ENIG) were evaluated in terms of their interconnection reliability by thermal cycle (T/C) test up to 2000 cycles at temperatures ranging from -55°C to 125°C and high-temperature storage test up to 1000 h at 150°C. The contact resistances of the Cu pillar/Sn-Ag micro bump showed significant differences after the T/C reliability test in the following order: thin Ni ENEPIG > OSP > ENEPIG where the thin Ni ENEPIG pad metal finish provided the best Cu pillar/Sn-Ag micro bump interconnection in terms of bump joint reliability. Various IMCs formed between the bump joint areas can account for the main failure mechanism.

  4. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  5. Board game

    International Nuclear Information System (INIS)

    Brennan, N.S.

    1982-01-01

    A board game comprises a board, a number of counters and two dice. The board is marked to provide a central area, representing the nucleus of an atom, and six or more annular rings extending concentrically around the central area, the rings being divided into 2,8,18,32,48 and 72 squares. Each ring represents an electron shell, and some of the squares are numbered, the number representing the atomic number of different elements. (author)

  6. Malnutrition in China's Rural Boarding Schools: The Case of Primary Schools in Shaanxi Province

    Science.gov (United States)

    Luo, Renfu; Shi, Yaojiang; Zhang, Linxiu; Liu, Chengfang; Rozelle, Scott; Sharbono, Brian

    2009-01-01

    The main goal of this paper is to document the nature of boarding schools and empirically analyse the difference in nutrition intake and malnutrition status between boarding and non-boarding students in western rural China. By using two data sets on boarding schools and boarding students in Shaanxi Province, a representative province in western…

  7. Nutrition during lactation

    National Research Council Canada - National Science Library

    Committee on Nutritional Status During Pregnancy and Lactation; Institute of Medicine

    ... and Nutrition Board Institute of Medicine National Academy of Sciences NATIONAL ACADEMY PRESS Washington, D.C. 1991 Copyrightthe cannot be not from book, paper however, version for formatting, original authoritative the typesetting-specific the as from created publication files XML from other this and of recomposed styles, version ...

  8. Buddy Board

    DEFF Research Database (Denmark)

    Enggaard, Helle; Moselund, Lene

    2015-01-01

    Projekt ’BuddyBoard’ er kommet i stand via et samarbejde mellem Frederikshavn kommune, Bunker43 og Lab. X. Afdeling en ’Havly’ på Sæby Ældrecenter fungerer som living lab, hvilket betyder, at det udgør et levende laboratorium for udvikling og afprøvning af teknologi (Schultz, 2013). Projektet er....... Bunker43 har udviklet en teknologi (BuddyBoard) til hurtig formidling af billeder fra pårørende og personale til beboere på institutioner. Pårørende og personale uploader billeder via en APP eller en hjemmeside og har mulighed for at tilføje en kort forklarende tekst til hvert billede. Beboeren ser...... billederne via en tablet. Systemet bygger på et simpelt og brugervenligt design, så ældre med kognitive og/eller fysiske funktionsnedsættelser kan anvende teknologien. BuddyBoard fungerer via internettet, og billederne gemmes på en sikret server hos udbyderen, som er Bunker43. Intentionerne med BuddyBoard er...

  9. A high-quality genome assembly of quinoa provides insights into the molecular basis of salt bladder-based salinity tolerance and the exceptional nutritional value

    Science.gov (United States)

    Zou, Changsong; Chen, Aojun; Xiao, Lihong; Muller, Heike M; Ache, Peter; Haberer, Georg; Zhang, Meiling; Jia, Wei; Deng, Ping; Huang, Ru; Lang, Daniel; Li, Feng; Zhan, Dongliang; Wu, Xiangyun; Zhang, Hui; Bohm, Jennifer; Liu, Renyi; Shabala, Sergey; Hedrich, Rainer; Zhu, Jian-Kang; Zhang, Heng

    2017-01-01

    Chenopodium quinoa is a halophytic pseudocereal crop that is being cultivated in an ever-growing number of countries. Because quinoa is highly resistant to multiple abiotic stresses and its seed has a better nutritional value than any other major cereals, it is regarded as a future crop to ensure global food security. We generated a high-quality genome draft using an inbred line of the quinoa cultivar Real. The quinoa genome experienced one recent genome duplication about 4.3 million years ago, likely reflecting the genome fusion of two Chenopodium parents, in addition to the γ paleohexaploidization reported for most eudicots. The genome is highly repetitive (64.5% repeat content) and contains 54 438 protein-coding genes and 192 microRNA genes, with more than 99.3% having orthologous genes from glycophylic species. Stress tolerance in quinoa is associated with the expansion of genes involved in ion and nutrient transport, ABA homeostasis and signaling, and enhanced basal-level ABA responses. Epidermal salt bladder cells exhibit similar characteristics as trichomes, with a significantly higher expression of genes related to energy import and ABA biosynthesis compared with the leaf lamina. The quinoa genome sequence provides insights into its exceptional nutritional value and the evolution of halophytes, enabling the identification of genes involved in salinity tolerance, and providing the basis for molecular breeding in quinoa. PMID:28994416

  10. Optimal production planning for PCB assembly

    CERN Document Server

    Ho, William

    2006-01-01

    Focuses on the optimization of the Printed circuit board (PCB) assembly lines' efficiency. This book integrates the component sequencing and the feeder arrangement problems together for the pick-and-place machine and the chip shooter machines.

  11. Board Task Performance

    DEFF Research Database (Denmark)

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina

    2012-01-01

    identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings....... The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes...... and board task performance....

  12. Defense Business Board

    Science.gov (United States)

    Skip to main content (Press Enter). Toggle navigation Defense Business Board Search Search Defense Business Board: Search Search Defense Business Board: Search Defense Business Board Business Excellence in Defense of the Nation Defense Business Board Home Charter Members Meetings Studies Contact Us The Defense

  13. Diet & Nutrition

    Science.gov (United States)

    ... Nutrition Share this page Facebook Twitter Email Diet & Nutrition Eating healthy to take charge of your health. Shelly Diagnosed in 2006 Diet & Nutrition Take Control of Your Weight Portion Control Low ...

  14. WIC nutrition risk criteria: a scientific assessment

    National Research Council Canada - National Science Library

    National Academy Press Staff; Institute of Medicine

    ... of WIC Nutrition Risk Criteria Food and Nutrition Board INSTITUTE OF MEDICINE NATIONAL ACADEMY PRESS Washington, D.C. 1996 Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typesetting-specific created from the as publication files other XML and from this of recomposed styles, versio...

  15. Bacteriophage Assembly

    Directory of Open Access Journals (Sweden)

    Anastasia A. Aksyuk

    2011-02-01

    Full Text Available Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

  16. Fuel assemblies

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi.

    1979-01-01

    Purpose: To prevent scattering of gaseous fission products released from fuel assemblies stored in an fbr type reactor. Constitution; A cap provided with means capable of storing gas is adapted to amount to the assembly handling head, for example, by way of threading in a storage rack of spent fuel assemblies consisting of a bottom plate, a top plate and an assembly support mechanism. By previously eliminating the gas inside of the assembly and the cap in the storage rack, gaseous fission products upon loading, if released from fuel rods during storage, are stored in the cap and do not scatter in the storage rack. (Horiuchi, T.)

  17. Sequence assembly

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

    2009-01-01

    Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies and...... in genomic DNA, highly expressed genes and alternative transcripts in EST sequences. We summarize existing comparisons of different assemblers and provide a detailed descriptions and directions for download of assembly programs at: http://genome.ku.dk/resources/assembly/methods.html....

  18. WHO: World Health Assembly.

    Science.gov (United States)

    McGregor, A

    1992-05-23

    1200 delegates from 175 member countries attended the 45th World Health Assembly in Geneva. Everyone at the Assembly ratified measures to prevent and control AIDS. 12 countries intended to do long term planning for community based care for AIDS patients. Further the Assembly denounced instances where countries and individuals denied the gravity of the AIDS pandemic. In fact, it expressed the importance for urgent and intensive action against HIV/AIDS. The assembly backed proposals to prevent and control sexually transmitted diseases that affect AIDS patients, especially hepatitis B. For example, in countries with hepatitis B prevalence 8% (many countries in Sub-Sahara Africa, Asia, the Pacific region, and South America), health officials should introduce hepatitis B vaccine into their existing immunization programs by 1995. By 1997, this vaccine should be part of all immunization programs. The Assembly was aware of the obstacles of establishing reliable cold chains for nationwide distribution, however. Delegates in Committee A objected to the fact that 50% of the populations of developing countries continued to have limited access to essential drugs. They also expressed disapproval in implementation of WHO's 1988 ethical criteria for promotion of drugs which WHO entrusted to the Council for International Organisations of Medical Sciences (CIOMS). CIOMS lacked WHO's status and thus could not effectively monitor drug advertising. In fact, the pharmaceutical industry as well as WHO provided the funds for a meeting of 25 experts to discuss principles included in the ethical criteria. At least 4 countries insisted that WHO have the ultimate authority in monitoring drug advertising. Delegates did adopt a compromise resolution on this topic which required that industry promotion methods be reported to the 1994 Assembly via the Executive Board. The Assembly requested WHO to establish an international advisory committee on nursing and midwifery and to improve the network of

  19. Nutrition Basics

    Science.gov (United States)

    ... and Shareables Autoimmune Diseases Breastfeeding Cancer Fitness and Nutrition Heart Disease and Stroke HIV and AIDS Mental ... health topic Autoimmune Diseases Breastfeeding Cancer Fitness and Nutrition Heart Disease and Stroke HIV and AIDS Mental ...

  20. Nutritional Support

    Science.gov (United States)

    Nutritional support is therapy for people who cannot get enough nourishment by eating or drinking. You may need ... absorb nutrients through your digestive system You receive nutritional support through a needle or catheter placed in your ...

  1. Nutritional supplements

    DEFF Research Database (Denmark)

    Petersen, Gry Bjerg; Andersen, Jens Rikardt

    2015-01-01

    Background: Several studies have indicated that cancer patients have significantly altered taste sensitivity without specifying the preferences. One of the related problems is low compliance to nutritional therapy with oral nutritional supplements (ONS) in patients suffering severe weight loss...

  2. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation et and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly ma...

  3. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2011-01-01

    Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may r...

  4. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may require t...

  5. Advantages of enteral nutrition over parenteral nutrition

    OpenAIRE

    Seres, David S.; Valcarcel, Monika; Guillaume, Alexandra

    2013-01-01

    It is a strong and commonly held belief among nutrition clinicians that enteral nutrition is preferable to parenteral nutrition. We provide a narrative review of more recent studies and technical reviews comparing enteral nutrition with parenteral nutrition. Despite significant weaknesses in the existing data, current literature continues to support the use of enteral nutrition in patients requiring nutrition support, over parenteral nutrition.

  6. Departmental Appeals Board Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions issued by the Chair and Board Members of the Departmental Appeals Board concerning determinations in discretionary, project grant programs, including...

  7. Pilot Boarding Areas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pilot boarding areas are locations at sea where pilots familiar with local waters board incoming vessels to navigate their passage to a destination port. Pilotage is...

  8. Nutrition Labeling

    DEFF Research Database (Denmark)

    Grunert, Klaus G

    2013-01-01

    because consumers will avoid products that the label shows to be nutritionally deficient, but also because food producers will try to avoid marketing products that appear, according to the label, as nutritionally problematic, for example, because of a high content of saturated fat or salt. Nutrition......Nutrition labeling refers to the provision of information on a food product’s nutritional content on the package label. It can serve both public health and commercial purposes. From a public health perspective, the aim of nutrition labeling is to provide information that can enable consumers...... to make healthier choices when choosing food products. Nutrition labeling is thus closely linked to the notion of the informed consumer, that chooses products according to their aims, on the basis of the information at their disposal. Because many consumers are assumed to be interested in making healthy...

  9. In Defense of Boards

    NARCIS (Netherlands)

    B. Visser (Bauke); S. Dominguez Martinez (Silvia); O.H. Swank (Otto)

    2007-01-01

    textabstractIt is often assumed that bad corporate performance means a bad CEO. The task of a board of directors is then simple: dismiss the executive. If it fails to do so, the board is said to be indolent. We take a kinder approach to observed board behaviour and point to the problems even

  10. Board of Directors or Supervisory Board

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2009-01-01

    The article analyses the legal consequences of the choice now available to Danish public limited companies, which can now opt for a two-tier management structure, in which the management board undertakes both the day-to-day and the overall management, while a supervisory board exercises control...... over the management board, including its appointment and dismissal. The article considers which companies a two-tier structure may be relevant for, and reviews the consequences for the composition, election and functioning of the company organs....

  11. Ordinary General Assembly

    CERN Multimedia

    Association du personnel

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Modifications to the statutes of the association Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda...

  12. [Community Nutrition].

    Science.gov (United States)

    Aranceta, Javier

    2004-06-01

    In the last 20 years, Public Health Nutrition focused mainly on the qualitative aspects which may influence the onset of chronic diseases, quality of life, physical and mental performance and life expectancy. This applied knowledge organised as part of preventive and health promotion programs led to the development of Community Nutrition. The aim of Community Nutrition actions is to adequate lifestyles related to food consumption patterns in order to improve the quality of life and contribute to health promotion of the population in the community where programs and services are delivered. Key functions to develop in a Community Nutrition Unit consist in the identification and assessment of nutrition problems in the community as well as the design, implementation and evaluation of intervention programs by means of appropriate strategies. These should aim at different populations groups and settings, such as work places, schools, high risk groups or the general public. Nowadays, Community Nutrition work efforts should focus on three main aspects: nutrition education in schools and in the community; food safety and food security and the development and reinforcement of food preparation skills across all age groups. Social catering services, either in schools, the work place or at the community level, need to ensure adequate nutritional supply, provide foods contributing to healthy eating practices as well as to enhance culinary traditions and social learning. Food safety and food security have become a top priority in Public Health. The concepts referes to the availability of food safe and adequate as well as in sufficient amount in order to satisfy nutrition requirements of all individuals in the community. Social changes along new scientific developments will introduce new demands in Community Nutrition work and individual dietary counselling will become a key strategy. In order to face new challenges, community nutrition pactitioners require a high quality

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Abe, Hideaki; Sakai, Takao; Ishida, Tomio; Yokota, Norikatsu.

    1992-01-01

    The lower ends of a plurality of plate-like shape memory alloys are secured at the periphery of the upper inside of the handling head of a fuel assembly. As the shape memory alloy, a Cu-Zn alloy, a Ti-Pd alloy or a Fe-Ni alloy is used. When high temperature coolants flow out to the handling head, the shape memory alloy deforms by warping to the outer side more greatly toward the upper portion thereof with the temperature increase of the coolants. As the result, the shape of the flow channel of the coolants is changed so as to enlarge at the exit of the upper end of the fuel assembly. Then, the pressure loss of the coolants in the fuel assembly is decreased by the enlargement. Accordingly, the flow rate of the coolants in the fuel assembly is increased to lower the temperature of the coolants. Further, high temperature coolants and low temperature coolants are mixed sufficiently just above the fuel assembly. This can suppress the temperature fluctuation of the mixed coolants in the upper portion of the reactor core, thereby enabling to decrease a fatigue and failures of the structural components in the upper portion of the reactor core. (I.N.)

  14. Sports Nutrition.

    Science.gov (United States)

    Missouri State Dept. of Health, Jefferson City.

    This guide deals with various aspects of sports and nutrition. Twelve chapters are included: (1) "Sports and Nutrition"; (2) "Eat to Compete"; (3) "Fit Folks Need Fit Food"; (4) "The Food Guide Pyramid"; (5) "Fat Finder's Guide"; (6) "Pre- and Post-Event Meals"; (7) "Tips for the…

  15. Nutritional epigenetics

    Science.gov (United States)

    This chapter is intended to provide a timely overview of the current state of research at the intersection of nutrition and epigenetics. I begin by describing epigenetics and molecular mechanisms of eigenetic regulation, then highlight four classes of nutritional exposures currently being investiga...

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi; Matsuzuka, Ryuji.

    1976-01-01

    Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

  17. Fuel assemblies

    International Nuclear Information System (INIS)

    Nagano, Mamoru; Yoshioka, Ritsuo

    1983-01-01

    Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

  18. Sports nutrition

    Directory of Open Access Journals (Sweden)

    Tomanić Milena

    2016-01-01

    Full Text Available Due to higher energy consumption, physically active people have higher nutritional requirements. In addition to other important factors for sports, such as good health and physical predisposition, adequate nutrition is a fundamental component. Sports nutrition must be well planned and individually adapted based on physical characteristics, tendencies towards gaining or losing weight, frequency, duration and intensity of training sessions. Studies have shown that a well-balanced ratio of macro and micronutrients, with the support of supplements and adequate hydration, can significantly improve athletic performance and plays a key role in achieving better results. An optimally designed nutritional program, with realistic and achievable goals, which complements a well-planned training program, is the basis for success in sports. Only when nutritional requirements are met, deficits can be prevented and performance in sport pushed to the limit.

  19. Valve assembly

    International Nuclear Information System (INIS)

    Sandling, M.

    1981-01-01

    An improved valve assembly, used for controlling the flow of radioactive slurry, is described. Radioactive contamination of the air during removal or replacement of the valve is prevented by sucking air from the atmosphere through a portion of the structure above the valve housing. (U.K.)

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

    1988-01-01

    A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

  1. Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Blackman, N.S.; Gummer, W.K.

    1982-02-01

    This paper has been prepared to provide an overview of the responsibilities and activities of the Atomic Energy Control Board. It is designed to address questions that are often asked concerning the establishment of the Atomic Energy Control Board, its enabling legislation, licensing and compliance activities, federal-provincial relationships, international obligations, and communications with the public

  2. SMART Boards Rock

    Science.gov (United States)

    Giles, Rebecca M.; Shaw, Edward L.

    2011-01-01

    SMART Board is a technology that combines the functionality of a whiteboard, computer, and projector into a single system. The interactive nature of the SMART Board offers many practical uses for providing an introduction to or review of material, while the large work area invites collaboration through social interaction and communication. As a…

  3. 77 FR 2541 - Board Meeting

    Science.gov (United States)

    2012-01-18

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation Board; Regular Meeting. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the...

  4. Quality and reliability control on assemblies

    International Nuclear Information System (INIS)

    Mueller, H.

    1976-01-01

    Taking as an example electronic assemblies in printed circuit board engineering, quality control during manufacture is dealt with. After giving a survey of four phases of quality and reliability control, some specific methods of quality control are dealt with by means of a flowchart, and by some examples the necessity and the success of these measures are shown. (RW) [de

  5. Fuel assembly

    International Nuclear Information System (INIS)

    Yokota, Tokunobu.

    1990-01-01

    A fuel assembly used in a FBR type nuclear reactor comprises a plurality of fuel rods and a moderator guide member (water rod). A moderator exit opening/closing mechanism is formed at the upper portion of the moderator guide member for opening and closing a moderator exit. In the initial fuel charging operation cycle to the reactor, the moderator exit is closed by the moderator exit opening/closing mechanism. Then, voids are accumulated at the inner upper portion of the moderator guide member to harden spectrum and a great amount of plutonium is generated and accumulated in the fuel assembly. Further, in the fuel re-charging operation cycle, the moderator guide member is used having the moderator exit opened. In this case, voids are discharged from the moderator guide member to decrease the ratio, and the plutonium accumulated in the initial charging operation cycle is burnt. In this way, the fuel economy can be improved. (I.N.)

  6. Fuel assemblies

    International Nuclear Information System (INIS)

    Echigoya, Hironori; Nomata, Terumitsu.

    1983-01-01

    Purpose: To render the axial distribution relatively flat. Constitution: First nuclear element comprises a fuel can made of zircalloy i.e., the metal with less neutron absorption, which is filled with a plurality of UO 2 pellets and sealed by using a lower end plug, a plenum spring and an upper end plug by means of welding. Second fuel element is formed by substituting a part of the UO 2 pellets with a water tube which is sealed with water and has a space for allowing the heat expansion. The nuclear fuel assembly is constituted by using the first and second fuel elements together. In such a structure, since water reflects neutrons and decrease their leakage to increase the temperature, reactivity is added at the upper portion of the fuel assembly to thereby flatten the axial power distribution. Accordingly, stable operation is possible only by means of deep control rods while requiring no shallow control rods. (Sekiya, K.)

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Kawai, Mitsuo.

    1988-01-01

    Purpose: To reduce the corrosion rate and suppress the increase of radioactive corrosion products in reactor water of nuclear fuel assemblies for use in BWR type reactors having spacer springs made of nickel based deposition reinforced type alloys. Constitution: Spacer rings made of nickel based deposition reinforced type alloy are incorporated and used as fuel assemblies after applying treatment of dipping and maintaining at high temperature water followed by heating in steams. Since this can remove the nickel leaching into reactor water at the initial stage, Co-58 as the radioactive corrosion products in the reactor water can be reduced, and the operation at in-service inspection or repairement can be facilitated to improve the working efficiency of the nuclear power plant. The dipping time is desirably more than 10 hours and more desirably more than 30 hours. (Horiuchi, T. )

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  9. Space Nutrition

    Science.gov (United States)

    Smith, Scott M.

    2009-01-01

    Optimal nutrition will be critical for crew members who embark on space exploration missions. Nutritional assessment provides an opportunity to ensure that crewmembers begin their missions in optimal nutritional status, to document changes during a mission and, if necessary, to provide intervention to maintain that status throughout the mission, and to assesses changes after landing in order to facilitate the return to their normal status as soon as possible after landing. We report here the findings from our nutritional assessment of astronauts who participated in the International Space Station (ISS) missions, along with flight and ground-based research findings. We also present ongoing and planned nutrition research activities. These studies provide evidence that bone loss, compromised vitamin status, and oxidative damage are the critical nutritional concerns for space travelers. Other nutrient issues exist, including concerns about the stability of nutrients in the food system, which are exposed to longterm storage and radiation during flight. Defining nutrient requirements, and being able to provide and maintain those nutrients on exploration missions, will be critical for maintaining crew member health.

  10. Network on chip master control board for neutron acquisition

    International Nuclear Information System (INIS)

    Ruiz-Martinez, E.; Mary, T.; Mutti, P.; Ratel, J.; Rey, F.

    2012-01-01

    The acquisition master control board is designed to assemble the various acquisition modes in use at the Institut Laue-Langevin (ILL). The main goal is to make the card common for all the ILL's instruments in a simple, modular and open way, giving the possibility to add new functionalities in order to follow the evolving demand. It has been necessary to define a central element to provide synchronization to the rest of the units. The backbone of the proposed acquisition control system is the denominated master acquisition board. The master board consists on a VME64X configurable high density I/O connection carrier board based on the latest Xilinx Virtex-6T FPGA. The internal architecture of the FPGA is designed as a Network on Chip (NoC) approach. The complete system also includes a display board and n histogram modules for live display of the data from the detectors. (authors)

  11. 75 FR 37452 - Science Board Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-06-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001... Safety and Applied Nutrition (CFSAN). The Science Board will hear about an interim report from the... the committee. Written submissions may be made to the contact person on or before August 9, 2010. Oral...

  12. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

  13. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

    1995-01-01

    The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

  14. Decamp Clock Board Firmware

    International Nuclear Information System (INIS)

    Vicente, J. de; Castilla, J.; Martinez, G.

    2007-01-01

    Decamp (Dark Energy Survey Camera) is a new instrument designed to explore the universe aiming to reveal the nature of Dark Energy. The camera consists of 72 CCDs and 520 Mpixels. The readout electronics of DECam is based on the Monsoon system. Monsoon is a new image acquisition system developed by the NOAO (National Optical Astronomical Observatory) for the new generation of astronomical cameras. The Monsoon system uses three types of boards inserted in a Eurocard format based crate: master control board, acquisition board and clock board. The direct use of the Monsoon system for DECam readout electronics requires nine crates mainly due to the high number of clock boards needed. Unfortunately, the available space for DECam electronics is constrained to four crates at maximum. The major drawback to achieve such desired compaction degree resides in the clock board signal density. This document describes the changes performed at CIEMAT on the programmable logic of the Monsoon clock board aiming to meet such restricted space constraints. (Author) 5 refs

  15. Decamp Clock Board Firmware

    Energy Technology Data Exchange (ETDEWEB)

    Vicente, J. de; Castilla, J.; Martinez, G.

    2007-09-27

    Decamp (Dark Energy Survey Camera) is a new instrument designed to explore the universe aiming to reveal the nature of Dark Energy. The camera consists of 72 CCDs and 520 Mpixels. The readout electronics of DECam is based on the Monsoon system. Monsoon is a new image acquisition system developed by the NOAO (National Optical Astronomical Observatory) for the new generation of astronomical cameras. The Monsoon system uses three types of boards inserted in a Eurocard format based crate: master control board, acquisition board and clock board. The direct use of the Monsoon system for DECam readout electronics requires nine crates mainly due to the high number of clock boards needed. Unfortunately, the available space for DECam electronics is constrained to four crates at maximum. The major drawback to achieve such desired compaction degree resides in the clock board signal density. This document describes the changes performed at CIEMAT on the programmable logic of the Monsoon clock board aiming to meet such restricted space constraints. (Author) 5 refs.

  16. Nutritional surveillance.

    Science.gov (United States)

    Mason, J B; Mitchell, J T

    1983-01-01

    The concept of nutritional surveillance is derived from disease surveillance, and means "to watch over nutrition, in order to make decisions that lead to improvements in nutrition in populations". Three distinct objectives have been defined for surveillance systems, primarily in relation to problems of malnutrition in developing countries: to aid long-term planning in health and development; to provide input for programme management and evaluation; and to give timely warning of the need for intervention to prevent critical deteriorations in food consumption. Decisions affecting nutrition are made at various administrative levels, and the uses of different types of nutritional surveillance information can be related to national policies, development programmes, public health and nutrition programmes, and timely warning and intervention programmes. The information should answer specific questions, for example concerning the nutritional status and trends of particular population groups.Defining the uses and users of the information is the first essential step in designing a system; this is illustrated with reference to agricultural and rural development planning, the health sector, and nutrition and social welfare programmes. The most usual data outputs are nutritional outcome indicators (e.g., prevalence of malnutrition among preschool children), disaggregated by descriptive or classifying variables, of which the commonest is simply administrative area. Often, additional "status" indicators, such as quality of housing or water supply, are presented at the same time. On the other hand, timely warning requires earlier indicators of the possibility of nutritional deterioration, and agricultural indicators are often the most appropriate.DATA COME FROM TWO MAIN TYPES OF SOURCE: administrative (e.g., clinics and schools) and household sample surveys. Each source has its own advantages and disadvantages: for example, administrative data often already exist, and can be

  17. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Luc Vos with regard to advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 14 to 28 June 2002. Human Resources Division Tel. 74128

  18. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel against the decision to grant him only a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main building (bldg. 500) from 1 September to 14 September 2008. Human Resources Department (73911)

  19. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Poul Frandsen concerning his assimilation into the new career structure. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 13 to 24 January 2003. Human Resources Division Tel. 74128

  20. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Personnel Division

    1999-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Joào Bento with regard to residential category. As the appellant has not objected, the recommendations of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article RÊVIÊ1.20 of the Staff Regulations.The relevant documents will therefore be posted on the notice boards of the Administration Building (N¡ 60) from 29 October to 12 November 1999.Personnel DivisionTel. 74128

  1. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2006-01-01

    The Joint Advisory Appeals Board was convened to examine an appeal lodged by a member of the personnel with regard to advancement. The person concerned has requested that the report of the Board and the final decision of the Director-General be brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (No. 60) from 24 March to 10 April 2006. Human Resources Department Tel. 74128

  2. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2007-01-01

    The Joint Advisory Appeals Board was convened to examine an internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has requested that the report of the Board and the final decision of the Director-General be brought to the notice of the members of the personnel, in accordance with Article R VI 1.18 of the Staff Regulations. The relevant documents will therefore be posted on the notice board of the Main building (Bldg. 60) from 24 September to 7 October 2007. Human Resources Department

  3. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Olivier Francis Martin with regard to indefinite contract. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 8 to 25 June 2001.

  4. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Jack Blanchard with regard to 'non recognition of specific functions'. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 12th to 26th April 2002. Human Resources Division Tel. 74128

  5. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mrs Judith Igo-Kemenes concerning the application of procedures foreseen by Administrative Circular N§ 26 (Rev. 3). As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 6 to 20 June 2003. Human Resources Division Tel. 74128

  6. Joint Advisory Appeals Board

    CERN Multimedia

    2004-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mrs Maria DIMOU with regard to a periodic one-step increase. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 30 April to 14 May 2004. Human Resources Department Tel. 74128

  7. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Joël Lahaye with regard to non-resident allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 18 May to 1st June 2001.

  8. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel with regard to the decision not to award him a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main building (Bldg. 500) from 17 March to 30 March 2008. Human Resources Department Tel. 73911

  9. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Bertrand Nicquevert with regard to the non-resident allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 29 November to 13 December 2002. Human Resources Division Tel. 74128

  10. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Antonio Millich with regard to advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 27 September to 11 October 2002. Human Resources Division Tel. 74128

  11. Joint Advisory Appeals Board

    CERN Multimedia

    Human Resources Department

    2005-01-01

    The Joint Advisory Appeals Board was convened to examine an appeal lodged by a member of the personnel with regard to a periodic one-step increase. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 1 to 15 April 2005. Human Resources Department Tel. 74128

  12. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel against the decision to grant him only a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main Building (Bldg. 500) from 1 September to 14 September 2008. Human Resources Department (73911)

  13. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Gert Jan Bossen with regard to dependent child allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 1st to 15 March 2002. Human Resources Division Tel. 74128

  14. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main Building (Bldg. 500) from 26 May to 6 June 2008. Human Resources Department (73911)

  15. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Serge Peraire with regard to exceptional advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 17 to 31 May 2002. Human Resources Division Tel. 74128

  16. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board was convened to examine an internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel, in accordance with Article R VI 1.18 of the Staff Regulations. These documents will therefore be posted on the notice board of the Main Building (Bldg. 60) from 21 January to 3 February 2008. Human Resources Department (73911)

  17. Primer printed circuit boards

    CERN Document Server

    Argyle, Andrew

    2009-01-01

    Step-by-step instructions for making your own PCBs at home. Making your own printed circuit board (PCB) might seem a daunting task, but once you master the steps, it's easy to attain professional-looking results. Printed circuit boards, which connect chips and other components, are what make almost all modern electronic devices possible. PCBs are made from sheets of fiberglass clad with copper, usually in multiplelayers. Cut a computer motherboard in two, for instance, and you'll often see five or more differently patterned layers. Making boards at home is relatively easy

  18. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Aloïs Girardoz with regard to classification and advancement. As the appellant has not objected, the Board's report and the Director-General's decision will be brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 15 to 29 August 2003. Human Resources Division Tel. 74128

  19. Goals in Nutrition Science 2015–2020

    KAUST Repository

    Allison, David B.

    2015-09-08

    With the definition of goals in Nutrition Science, we are taking a brave step and a leap of faith with regard to predicting the scope and direction of nutrition science over the next 5 years. The content of this editorial has been discussed, refined, and evaluated with great care by the Frontiers in Nutrition editorial board. We feel the topics described represent the key opportunities, but also the biggest challenges in our field. We took a clean-slate, bottom-up approach to identify and address these topics and present them in eight categories. For each category, the authors listed take responsibility, and deliberately therefore this document is a collection of thoughts from active minds, rather than a complete integration or consensus. At Frontiers in Nutrition, we are excited to develop and share a platform for this discussion. Healthy Nutrition for all – an ambition too important to be handled by detached interest groups.

  20. Boat boarding ladder placement

    Science.gov (United States)

    1998-04-01

    Presented in three volumes; 'Boat Boarding Ladder Placement,' which explores safety considerations including potential for human contact with a rotating propeller; 'Boat Handhold Placement,' which explores essential principles and methods of fall con...

  1. Checking a printed board

    CERN Multimedia

    1977-01-01

    An 'Interactive Printed Circuit Board Design System' has been developed by a company in a Member-State. Printed circuits are now produced at the SB's surface treatment workshop using a digitized photo-plotter.

  2. Boarding school rules.

    Science.gov (United States)

    Griffiths, Matt

    2017-01-04

    Ofsted inspects and regulates services that care for children and young people, including boarding facilities. Medication management is an integral part of caring for children in boarding schools, and robust systems must be in place to pass inspection. These systems must cover how medicines are dispensed, administered and stored at the facility, risk assessments, identifying which pupils can manage their own medicines and the individual health needs of boarders, so that care plans can be put in place for children with specific needs.

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1970-01-01

    Herein disclosed is a fuel assembly in which a fuel rod bundle is easily detachable by rotating a fuel rod fastener rotatably mounted to the upper surface of an upper tie-plate supporting a fuel bundle therebelow. A locking portion at the leading end of each fuel rod protrudes through the upper tie-plate and is engaged with or separated from the tie-plate by the rotation of the fastener. The removal of a desired fuel rod can therefore be remotely accomplished without the necessity of handling pawls, locking washers and nuts. (Owens, K.J.)

  4. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... the investigative tools offered by assemblage theory, actor-network theory and non-representational theory. Clear theoretical explanation and methodological innovation, alongside empirical applications of these emerging frameworks will offer readers new and refreshing perspectives on consumer culture and market...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  5. COLLABORATION BOARD (CB55)

    CERN Multimedia

    B. Cousins

    Open Access Publication Policy ATLAS had recently issued a short statement in support of open access publishing. The mood of the discussions in the December CMS Collaboration Board had appeared to be in favour and so it was being proposed that CMS issue the same statement as that made by ATLAS (the statement is attached to the agenda of this meeting). The Collaboration Board agreed. Election of the Chair of the Collaboration Board Following the agreement to shorten the terms of both the Spokesperson and the Collaboration Board Chair, and to introduce a longer overlap period between the election and the start of the term, the election for the next Collaboration Board Chair was due in December 2007. If the old standard schedule specified in the Constitution were adapted to this date, then the Board should be informed at the present meeting that the election was being prepared. However, it was felt that the experience of the previous year's election of the Spokesperson had shown that it would be desirable to...

  6. Parenteral nutrition.

    Science.gov (United States)

    Inayet, N; Neild, P

    2015-03-01

    Over the last 50 years, parenteral nutrition has been recognised as an invaluable and potentially lifesaving tool in the physician's arsenal in the management of patients with intestinal failure or inaccessibility; however, it may also be associated with a number of potentially life-threatening complications. A recent NCEPOD report (2010) identified a number of inadequacies in the overall provision and management of parenteral nutrition and recommendations were made with the aim of improving clinical practice in the future. This paper focuses on the practical aspects relating to parenteral nutrition for adults, including important concepts, such as patient selection, as well as general management. We also explore the various pitfalls and potential complications and how these may be minimised.

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Kurihara, Kunitoshi; Azekura, Kazuo.

    1992-01-01

    In a reactor core of a heavy water moderated light water cooled pressure tube type reactor, no sufficient effects have been obtained for the transfer width to a negative side of void reactivity change in a region of a great void coefficient. Then, a moderation region divided into upper and lower two regions is disposed at the central portion of a fuel assembly. Coolants flown into the lower region can be discharged to the cooling region from an opening disposed at the upper end portion of the lower region. Light water flows from the lower region of the moderator region to the cooling region of the reactor core upper portion, to lower the void coefficient. As a result, the reactivity performance at low void coefficient, i.e., a void reaction rate is transferred to the negative side. Thus, this flattens the power distribution in the fuel assembly, increases the thermal margin and enables rapid operaiton and control of the reactor core, as well as contributes to the increase of fuel burnup ratio and reduction of the fuel cycle cost. (N.H.)

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

    1998-01-01

    The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

  9. Fuel assembly

    International Nuclear Information System (INIS)

    Fushimi, Atsushi; Shimada, Hidemitsu; Aoyama, Motoo; Nakajima, Junjiro

    1998-01-01

    In a fuel assembly for an n x n lattice-like BWR type reactor, n is determined to 9 or greater, and the enrichment degree of plutonium is determined to 4.4% by weight or less. Alternatively, n is determined to 10 or greater, and the enrichment degree of plutonium is determined to 5.2% by weight or less. An average take-out burnup degree is determined to 39GWd/t or less, and the matrix is determined to 9 x 9 or more, or the average take-out burnup degree is determined to 51GWd/t, and the matrix is determined to 10 x 10 or more and the increase of the margin of the maximum power density obtained thereby is utilized for the compensation of the increase of distortion of power distribution due to decrease of the kinds of plutonium enrichment degree, thereby enabling to reduce the kind of the enrichment degree of MOX fuel rods to one. As a result, the manufacturing step for fuel pellets can be simplified to reduce the manufacturing cost for MOX fuel assemblies. (N.H.)

  10. General Assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : 1- Adoption de l’ordre du jour. 2- Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. 3- Présentation et approbation du rapport d’activités 2014. 4- Présentation et approbation du rapport financier 2014. 5- Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. 6- Programme 2015. 7- Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. 8- Pas de modifications aux Statuts de l'Association du personnel proposée. 9- Élections des membres de la Commission é...

  11. General Assembly

    CERN Multimedia

    Staff Association

    2017-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 avril 2016. Présentation et approbation du rapport d’activités 2016. Présentation et approbation du rapport financier 2016. Présentation et approbation du rapport des vérificateurs aux comptes pour 2016. Programme de travail 2017. Présentation et approbation du projet de budget 2017 Approbation du taux de cotisation pour 2018. Modifications aux Statuts de l'Association du personnel proposées. Élections des membres de la Commission électorale. Élections des vérifica...

  12. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    Mardi 5 avril à 11 h 00 BE Auditorium Meyrin (6-2-024) Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 mai 2015. Présentation et approbation du rapport d’activités 2015. Présentation et approbation du rapport financier 2015. Présentation et approbation du rapport des vérificateurs aux comptes pour 2015. Programme de travail 2016. Présentation et approbation du projet de budget 2016 Approbation du taux de cotisation pour 2017. Modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commissio...

  13. General assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. Présentation et approbation du rapport d’activités 2014. Présentation et approbation du rapport financier 2014. Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. Programme 2015. Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. Pas de modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commission électorale. &am...

  14. Fuel assembly

    International Nuclear Information System (INIS)

    Nomata, Terumitsu.

    1993-01-01

    Among fuel pellets to be loaded to fuel cans of a fuel assembly, fuel pellets having a small thermal power are charged in a region from the end of each of spacers up to about 50mm on the upstream of coolants that flow vertically at the periphery of fuel rods. Coolants at the periphery of fuel rods are heated by the heat generation, to result in voids. However, since cooling effect on the upstream of the spacers is low due to influences of the spacers. Further, since the fuel pellets disposed in the upstream region have small thermal power, a void coefficient is not increased. Even if a thermal power exceeding cooling performance should be generated, there is no worry of causing burnout in the upstream region. Even if burnout should be caused, safety margin and reliability relative to burnout are improved, to increase an allowable thermal power, thereby enabling to improve integrity and reliability of fuel rods and fuel assemblies. (N.H.)

  15. Board Certification in Counseling Psychology

    Science.gov (United States)

    Crowley, Susan L.; Lichtenberg, James W.; Pollard, Jeffrey W.

    2012-01-01

    Although specialty board certification by the American Board of Professional Psychology (ABPP) has been a valued standard for decades, the vast majority of counseling psychologists do not pursue board certification in the specialty. The present article provides a brief history of board certification in general and some historical information about…

  16. 78 FR 4847 - Board Meeting

    Science.gov (United States)

    2013-01-23

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the offices of the Farm...

  17. 77 FR 55837 - Board Meeting

    Science.gov (United States)

    2012-09-11

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation. ACTION: Regular meeting. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). Date and Time: The meeting of the Board will be held...

  18. Nutrition and Diet

    Science.gov (United States)

    ... Thai HbH:Vietnamese Relevant links Living with Thalassemia NUTRITION AND EXERCISE ▶ Nutrition and Diet ▶ Diet for the ... Thalassemia (for providers) Exercise for Patients with Thalassemia Nutrition and Diet Nutritional deficiencies are common in thalassemia, ...

  19. Medical Issues: Nutrition

    Science.gov (United States)

    ... support & care > living with sma > medical issues > nutrition Nutrition Good nutrition is essential to health and growth. ... must make decisions based on their own needs. Nutrition Considerations Since we are still waiting for clinical ...

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto; Ogiya, Shunsuke.

    1989-01-01

    For improving the economy of a BWR type reactor by making the operation cycle longer, the fuel enrichment degree has to be increased further. However, this makes the subcriticality shallower in the upper portion of the reactor core, to bring about a possibility that the reactor shutdown becomes impossible. In the present invention, a portion of fuel rod is constituted as partial length fuel rods (P-fuel rods) in which the entire stack length in the effective portion is made shorter by reducing the concentration of fissionable materials in the axial portion. A plurality of moderator rods are disposed at least on one diagonal line of a fuel assembly and P-fuel rods are arranged at a position put between the moderator rods. This makes it possible to reactor shutdown and makes the axial power distribution satisfactory even if the fuel enrichment degree is increased. (T.M.)

  1. Fuel assembly

    International Nuclear Information System (INIS)

    Bando, Masaru.

    1993-01-01

    As neutron irradiation progresses on a fuel assembly of an FBR type reactor, a strong force is exerted to cause ruptures if the arrangement of fuel elements is not displaced, whereas the fuel elements may be brought into direct contact with each other not by way of spacers to cause burning damages if the arrangement is displaced. In the present invention, the circumference of fuel elements arranged in a normal triangle lattice is surrounded by a wrapper tube having a hexagonal cross section, wire spacers are wound therearound, and deformable spacers are distributed to optional positions for fuel elements in the wrapper tube. Interaction between the fuel elements caused by irradiation is effectively absorbed, thereby enabling to delay the occurrence of the rupture and burning damages of the elements. (N.H.)

  2. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto.

    1991-01-01

    In a fuel assembly in which spectral shift type moderator guide members are arranged, the moderator guide member has a flow channel resistance member, that provides flow resistance against the moderators, in the upstream of a moderator flowing channel, by which the ratio of removing coolants is set greater at the upstream than downstream. With such a constitution, the void distribution increasing upward in the channel box except for the portion of the moderator guide member is moderated by the increase of the area of the void region that expands downward in the guide member. Accordingly, the axial power distribution is flattened throughout the operation cycle and excess distortion is eliminated to improve the fuel integrity. (T.M.)

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Wataumi, Kazutoshi; Tajiri, Hiroshi.

    1992-01-01

    In a fuel assembly of a BWR type reactor, a pellet to be loaded comprises an external layer of fissile materials containing burnable poisons and an internal layer of fissile materials not containing burnable poison. For example, there is provided a dual type pellet comprising an external layer made of UO 2 incorporated with Gd 2 O 3 at a predetermined concentration as the burnable poisons and an internal layer made of UO 2 not containing Gd 2 O 3 . The amount of the burnable poisons required for predetermined places is controlled by the thickness of the ring of the external layer. This can dissipate an unnecessary poisoning effect at the final stage of the combustion cycle. Further, since only one or a few kinds of powder mixture of the burnable poisons and the fissile materials is necessary, production and product control can be facilitated. (I.N.)

  4. Fuel assembly

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi.

    1995-01-01

    Burnable poison-incorporating fuel rods of a first group are disposed in a region in adjacent with a water rod having a large diameter (neutron moderator rod) disposed to the central portion of a fuel assembly. Burnable poison-incorporating fuel rods of a second group are disposed to a region other than peripheral zone in adjacent with a channel box and corners positioned at an inner zone, in adjacent with the channel box. The average concentration of burnable poisons of the burnable poison-incorporating fuel rods of the first group is made greater than that of the second group. With such a constitution, when the burnable poisons of the first group are burnt out, the burnable poisons of the second group are also burnt out at the same time. Accordingly, an amount of burnable poisons left unburnt at the final stage of the operation cycle is reduced, to improve the reactivity. This can improve the economical property. (I.N.)

  5. Fuel assemblies

    International Nuclear Information System (INIS)

    Yoshioka, Ritsuo.

    1983-01-01

    Purpose: To improve the operation performance of a BWR type reactor by improving the distribution of the uranium enrichment and the incorporation amount of burnable poisons in fuel assemblies. Constitution: The average enrichment of uranium 235 is increased in the upper portion as compared with that in the lower portion, while the incorporation amount of burnable poisons is increased in an upper portion as compared with that in the lower portion. The difference in the incorporation amount of the burnable poisons between the upper and lower portions is attained by charging two kinds of fuel rods; the ones incorporated with the burnable poisons over the entire length and the others incorporated with the burnable poisons only in the upper portions. (Seki, T.)

  6. 7 CFR 1160.105 - Board.

    Science.gov (United States)

    2010-01-01

    ... and Orders; Milk), DEPARTMENT OF AGRICULTURE FLUID MILK PROMOTION PROGRAM Fluid Milk Promotion Order Definitions § 1160.105 Board. Board means the National Processor Advertising and Promotion Board established... Promotion Board or Board). ...

  7. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Neil Calder, Mrs Sudeshna Datta Cockerill, Mrs Andrée Fontbonne, Mrs Moniek Laurent and Mr Ulrich Liptow with regard to membership in the Pension Fund under the period with a Paid Associate contract, appeals dealt with on a collective basis. As the appellants have not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 10 to 31 August 2001.

  8. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching, Germany (near Munich) on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in...

  9. WeaselBoard :

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.; Van Houten, Jonathan Roger; Urrea, Jorge Mario; King, Michael Aaron; Clements, Abraham Anthony; Jacob, Joshua A.

    2013-10-01

    Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-day exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.

  10. Joint Advisory Appeals Board

    CERN Multimedia

    2013-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a former member of the personnel, a beneficiary of the CERN Pension Fund, against the calculation of his pension in the framework of the Progressive Retirement Programme.   The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be available from 26 July to 11 August 2013 at the following link. HR Department Head Office

  11. New Service Status Board

    CERN Multimedia

    2013-01-01

    On Monday 14 October, the Service Status Board for GS and IT will change. The new Status Board will be integrated with the CERN Service Portal and with the CERN Service Catalogue.   As of today, the SSB will display “Service Incidents”, “Planned Interventions” and “Service Changes”. References valid from 14 October: CERN SSB at https://cern.ch/ssb Computing SSB (previously IT SSB) at https://cern.ch/itssb   Nicole Cremel, IT and GS Service Management Support

  12. Does Board Diversity Really Matter?

    DEFF Research Database (Denmark)

    Rose, Caspar; Munch-Madsen, Peter; Funch, Maja

    2013-01-01

    We study the impact of female board representation as well as citizenship on corporate performance based on a sample of the largest listed firms in the Nordic countries as well as Germany. We also seek to determine the variation of board structures using factor analysis. We find no support for any...... performance impact relating to female board representation. However, we find an impact of board citizenship on performance showing that board members with a background from common law have a significant positive influence on corporate performance measured as ROA, ROE and ROCE. Consistent with other studies we...... also document that large boards impact corporate performance negatively. Moreover we also show that data set on boards can be explained by four underlying factors. This article adds insight to board determinants of corporate performance as well as the classification of board variation. Specifically...

  13. Nutritional Metabolomics

    DEFF Research Database (Denmark)

    Gürdeniz, Gözde

    strategy influences the patterns identified as important for the nutritional question under study. Therefore, in depth understanding of the study design and the specific effects of the analytical technology on the produced data is extremely important to achieve high quality data handling. Besides data......Metabolomics provides a holistic approach to investigate the perturbations in human metabolism with respect to a specific exposure. In nutritional metabolomics, the research question is generally related to the effect of a specific food intake on metabolic profiles commonly of plasma or urine....... Application of multiple analytical strategies may provide comprehensive information to reach a valid answer to these research questions. In this thesis, I investigated several analytical technologies and data handling strategies in order to evaluate their effects on the biological answer. In metabolomics, one...

  14. Nutritional Biochemistry

    Science.gov (United States)

    Smith, Scott M.

    2010-01-01

    This slide presentation reviews some of the effects that space flight has on humans nutritional biochemistry. Particular attention is devoted to the study of protein breakdown, inflammation, hypercatabolism, omega 3 fatty acids, vitamin D, calcium, urine, folate and nutrient stability of certain vitamins, the fluid shift and renal stone risk, acidosis, iron/hematology, and the effects on bone of dietary protein, potassium. inflammation, and omega-3 fatty acids

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Hirukawa, Koji; Sakurada, Koichi.

    1992-01-01

    In a fuel assembly for a BWR type reactor, water rods or water crosses are disposed between fuel rods, and a value with a spring is disposed at the top of the coolant flow channel thereof, which opens a discharge port when pressure is increased to greater than a predetermined value. Further, a control element for the amount of coolant flow rate is inserted retractable to a control element guide tube formed at the lower portion of the water rod or the water cross. When the amount of control elements inserted to the control element guide tube is small and the inflown coolant flow rate is great, the void coefficient at the inside of the water rod is less than 5%. On the other hand, when the control elements are inserted, the flow resistance is increased, so that the void coefficient in the water rod is greater than 80%. When the pressure in the water rod is increased, the valve with the spring is raised to escape water or steams. Then, since the variation range of the change of the void coefficient can be controlled reliably by the amount of the control elements inserted, and nuclear fuel materials can be utilized effectively. (N.H.)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Hiraiwa, Koji; Ueda, Makoto

    1989-01-01

    In a fuel assembly used for a light water cooled reactor such as a BWR type reactor, a water rod is divided axially into an upper outer tube and a lower outer tube by means of a plug disposed from the lower end of a water rod to a position 1/4 - 1/2 of the entire length for the water rod. Inlet apertures and exit apertures for moderators are respectively perforated for the divided outer tube and upper and lower portions. Further, an upper inner tube with less neutron irradiation growing amount than the outer tube is perforated on the plug in the outer tube, while a lower inner tube with greater neutron irradiation growing amount than the outer tube is suspended from the lower surface of the plug in the outer tube. Then, the opening area for the exit apertures disposed to the upper outer tube and the lower outer tube is controlled depending on the difference of the neutron irradiation growing amount between the upper inner tube and the upper outer tube, and the difference of the neutron irradiation growing amount between the lower inner tube and the lower outer tube. This enables effective spectral shift operation and improve the fuel economy. (T.M.)

  17. Fuel assembly

    International Nuclear Information System (INIS)

    Yamazaki, Hajime.

    1995-01-01

    In a fuel assembly having fuel rods of different length, fuel pellets of mixed oxides of uranium and plutonium are loaded to a short fuel rod. The volume ratio of a pellet-loaded portion to a plenum portion of the short fuel rod is made greater than the volume ratio of a fuel rod to which uranium fuel pellets are loaded. In addition, the volume of the plenum portion of the short fuel rod is set greater depending on the plutonium content in the loaded fuel pellets. MOX fuel pellets are loaded on the short fuel rods having a greater degree of freedom relevant to the setting for the volume of the plenum portion compared with that of a long rod fuel, and the volume of the plenum portion is ensured greater depending on the plutonium content. Even if a large amount of FP gas and He gas are discharged from the MOX fuels compared with that from the uranium fuels, the internal pressure of the MOX fuel rod during operation is maintained substantially identical with that of the uranium fuel rod, so that a risk of generating excess stresses applied to the fuel cladding tubes and rupture of fuels are greatly reduced. (N.H.)

  18. Fuel assembly

    International Nuclear Information System (INIS)

    Nakajima, Akiyoshi; Bessho, Yasunori; Aoyama, Motoo; Koyama, Jun-ichi; Hirakawa, Hiromasa; Yamashita, Jun-ichi; Hayashi, Tatsuo

    1998-01-01

    In a fuel assembly of a BWR type reactor in which a water rod of a large diameter is disposed at the central portion, the cross sectional area perpendicular to the axial direction comprises a region a of a fuel rod group facing to a wide gap water region to which a control rod is inserted, a region b of a fuel rod group disposed on the side of the wide gap water region other than the region a, a region d of a fuel rod group facing to a narrow gap water region and a region c of a fuel rod group disposed on the side of the narrow gap water region other than the region d. When comparing an amount of fission products contained in the four regions relative to that in the entire regions and average enrichment degrees of fuel rods for the four regions, the relative amount and the average enrichment degree of the fuel rod group of the region a is minimized, and the relative amount and the average enrichment degree of the fuel rod group in the region b is maximized. Then, reactor shut down margin during cold operation can be improved while flattening the power in the cross section perpendicular to the axial direction. (N.H.)

  19. Magnetic field on board

    International Nuclear Information System (INIS)

    Estevez Radio, H.; Fernandez Arenal, C.A.

    1995-01-01

    Here, the calculation of the magnetic field on board ships is performed, using matrix calculus, in a similar way as when the magnetic field in matter is studied. Thus the final formulas are written in a more compact form and they are obtained through a simpler way, more suitable for the university education. (Author)

  20. Board affiliation and pay gap

    Directory of Open Access Journals (Sweden)

    Shenglan Chen

    2014-06-01

    Full Text Available This paper examines the effects of board affiliation on the corporate pay gap. Using a sample of Chinese listed firms from 2005 to 2011, we find that boards with a greater presence of directors appointed by block shareholders have lower pay gaps. Furthermore, the governance effects of board affiliation with and without pay are distinguished. The empirical results show that board affiliation without pay is negatively related to the pay gap, while board affiliation with pay is positively related to the pay gap. Overall, the results shed light on how block shareholders affect their companies’ pay gaps through board affiliation.

  1. A microprocessor-based single board computer for high energy physics event pattern recognition

    International Nuclear Information System (INIS)

    Bernstein, H.; Gould, J.J.; Imossi, R.; Kopp, J.K.; Love, W.A.; Ozaki, S.; Platner, E.D.; Kramer, M.A.

    1981-01-01

    A single board MC 68000 based computer has been assembled and bench marked against the CDC 7600 running portions of the pattern recognition code used at the MPS. This computer has a floating coprocessor to achieve throughputs equivalent to several percent that of the 7600. A major part of this work was the construction of a FORTRAN compiler including assembler, linker and library. The intention of this work is to assemble a large number of these single board computers in a parallel FASTBUS environment to act as an on-line and off-line filter for the raw data from MPS II and ISABELLE experiments. (orig.)

  2. Microprocessor-based single board computer for high energy physics event pattern recognition

    International Nuclear Information System (INIS)

    Bernstein, H.; Gould, J.J.; Imossi, R.; Kopp, J.K.; Love, W.A.; Ozaki, S.; Platner, E.D.; Kramer, M.A.

    1981-01-01

    A single board MC 68000 based computer has been assembled and bench marked against the CDC 7600 running portions of the pattern recognition code used at the MPS. This computer has a floating coprocessor to achieve throughputs equivalent to several percent that of the 7600. A major part of this work was the construction of a FORTRAN compiler including assembler, linker and library. The intention of this work is to assemble a large number of these single board computers in a parallel FASTBUS environment to act as an on-line and off-line filter for the raw data from MPS II and ISABELLE experiments

  3. SVX Sequencer Board

    International Nuclear Information System (INIS)

    Utes, M.

    1997-01-01

    The SVX Sequencer boards are 9U by 280mm circuit boards that reside in slots 2 through 21 of each of eight Eurocard crates in the D0 Detector Platform. The basic purpose is to control the SVX chips for data acquisition and when a trigger occurs, to gather the SVX data and relay the data to the VRB boards in the Movable Counting House. Functions and features are as follows: (1) Initialization of eight SVX chip strings using the MIL-STD-1553 data bus; (2) Real time manipulation of the SVX control lines to effect data acquisition, digitization, and readout based on the NRZ/Clock signals from the Controller; (3) Conversion of 8-bit electrical SVX readout data to an optical signal operating at 1.062 Gbit/sec, sent to the VRB. Eight HDIs will be serviced per board; (4) Built-in logic analyzer which can record the most important control and data lines during a data acquisition cycle and put this recorded information onto the 1553 bus; (5) Identification header and end of data trailer tacked onto data stream; (6) 1553 register which can read the current values of the control and data lines; (7) 1553 register which can test the optical link; (8) 1553 registers for crossing pulse width, calibration pulse voltage, and calibration pipeline select; (9) 1553 register for reading the optical drivers status link; (10) 1553 register for power control of SVX chips and ignoring bad SVX strings; (11) Front panel displays and LEDs show the board status at a glance; (12) In-system programmable EPLDs are programmed via 1553 or Altera's 'Bitblaster'; (13) Automatic readout abort after 45us; (14) Supplies BUSY signal back to Trigger Framework; (15) Supports a heartbeat system to prevent excessive SVX current draw; and (16) Supports a SVX power trip feature if heartbeat failure occurs.

  4. Board diversity in family firms

    OpenAIRE

    Menozzi, Anna; Fraquelli, Giovanni; Novara, Jolanda de

    2015-01-01

    The paper deals with diversity as a key factor to improve the board of directors’ decision process in family firms. The empirical literature about board diversity points at the positive impact of diversity on board functioning and firm performance. The paper uses a statistical diversity index to capture the heterogeneity of board of directors and put it in relation with firm performance, as measured by firm profitability. The empirical analysis is based on a newly collected panel of 327 famil...

  5. Why Not Charter School Boards?

    Science.gov (United States)

    Schlechty, Phillip C.; Cole, Robert W.

    1993-01-01

    Claiming that individual school board members act in selfish ways, proposes electing entire school board as a slate. Board would collectively be held responsible for performance of the school system and all of its employees. State legislation would be required to specify how interested groups would select a slate and create a charter, which is the…

  6. Board effectiveness: Investigating payment asymmetry between board members and shareholders

    Directory of Open Access Journals (Sweden)

    Wuchun Chi

    2008-01-01

    Full Text Available Board members may well be responsible for dissension between themselves and shareholders since they are simultaneously the setters and receivers of both board remuneration and dividends. They may act out of their own personal interests at the expense of external shareholders. We investigate the impact of ownership structure, board structure and control deviation on payment asymmetry, where excessively high remuneration is paid to board members but considerably lower dividends are distributed to shareholders. We find strong evidence confirming that the smaller the shareholdings of board members and outside blockholders are, the more asymmetric the payments are. With controlling family members on the board and a higher percentage of seats held by independent board members, there is a slight reduction in the likelihood and severity of payment asymmetry. In addition, it is abundantly clear that the larger the board seat-control deviation is, the greater is the likelihood and severity of payment asymmetry. While prior research has primarily focused on board-manager agency issues, the board-shareholder perspective could be even more important in that it is the board that is the most directly delegated agent of shareholders, not the managers

  7. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching (near Munich), Germany on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in Chile. The Director-General receiv...

  8. The on-board tailpipe emissions measurement system (TOTEMS) : proof\\0x2010 of\\0x2010concept.

    Science.gov (United States)

    2009-06-03

    An on-board tailpipe emissions instrumentation system was designed, assembled and tested as proof-of-concept : for the University of Vermonts Transportation Research Center (TRC) Signature Project #2 real-world vehicle : emissions data colle...

  9. A Pilot Study to Examine the Effects of a Nutrition Intervention on Nutrition Knowledge, Behaviors, and Efficacy Expectations in Middle School Children

    Science.gov (United States)

    Fahlman, Mariane M.; Dake, Joseph A.; McCaughtry, Nate; Martin, Jeffrey

    2008-01-01

    Background: This was a pilot study to determine the impact of the Michigan Model (MM) Nutrition Curriculum on nutrition knowledge, efficacy expectations, and eating behaviors in middle school students. Methods: The study was conducted in a large metropolitan setting and approved by the Institutional Review Board. The participants for this study…

  10. Nutrition for Young Men

    Science.gov (United States)

    ... Healthy Aging Nutrition for Young Men Print Email Nutrition for Young Men Reviewed by Taylor Wolfram, MS, ... 2017 XiXinXing/iStock/Thinkstock For many young men, nutrition isn't always a focus. There are many ...

  11. Nutrition Advice and Recipes

    Science.gov (United States)

    ... Sign-Up Home Patient Information Nutrition Advice & Recipes Nutrition Advice & Recipes This is a very important section ... information on all aspects of daily life, including nutrition, medical treatments, pain management, and practical tips. For ...

  12. Nutrition Following Pancreatic Surgery

    Science.gov (United States)

    ... BACK Contact Us DONATE NOW GENERAL DONATION PURPLESTRIDE Nutrition Following Pancreatic Surgery Home Facing Pancreatic Cancer Living with Pancreatic Cancer Diet and Nutrition Nutrition Following Pancreatic Surgery Ver esta página en ...

  13. Artificial Hydration and Nutrition

    Science.gov (United States)

    ... Crisis Situations Pets and Animals myhealthfinder Food and Nutrition Healthy Food Choices Weight Loss and Diet Plans ... Your Health Resources Healthcare Management Artificial Hydration and Nutrition Artificial Hydration and Nutrition Share Print Patients who ...

  14. Oceanographic data collected from Tansy Point (USCG front range board) by Center for Coastal Margin Observation and Prediction (CMOP) and assembled by Northwest Association of Networked Ocean Observation Systems (NANOOS) in the Columbia River Estuary and North East Pacific Ocean from 1996-09-05 to 2014-10-01 (NCEI Accession 0162189)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0162189 contains navigational and physical data collected at Tansy Point (USCG front range board), a fixed station in the Columbia River estuary -...

  15. Oceanographic data collected from Woody Island (USCG Pillar Rock back range board) by Center for Coastal Margin Observation and Prediction (CMOP) and assembled by Northwest Association of Networked Ocean Observation Systems (NANOOS) in the Columbia River Estuary and North East Pacific Ocean from 1997-02-07 to 2015-08-19 (NCEI Accession 0162191)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0162191 contains navigational and physical data collected at Woody Island (USCG Pillar Rock back range board), a fixed station in the Columbia River...

  16. Patients overwhelmingly prefer inpatient boarding to emergency department boarding.

    Science.gov (United States)

    Viccellio, Peter; Zito, Joseph A; Sayage, Valerie; Chohan, Jasmine; Garra, Gregory; Santora, Carolyn; Singer, Adam J

    2013-12-01

    Boarding of admitted patients in the emergency department (ED) is a major cause of crowding. One alternative to boarding in the ED, a full-capacity protocol where boarded patients are redeployed to inpatient units, can reduce crowding and improve overall flow. Our aim was to compare patient satisfaction with boarding in the ED vs. inpatient hallways. We performed a structured telephone survey regarding patient experiences and preferences for boarding among admitted ED patients who experienced boarding in the ED hallway and then were subsequently transferred to inpatient hallways. Demographic and clinical characteristics, as well as patient preferences, including items related to patient comfort and safety using a 5-point scale, were recorded and descriptive statistics were used to summarize the data. Of 110 patients contacted, 105 consented to participate. Mean age was 57 ± 16 years and 52% were female. All patients were initially boarded in the ED in a hallway before their transfer to an inpatient hallway bed. The overall preferred location after admission was the inpatient hallway in 85% (95% confidence interval 75-90) of respondents. In comparing ED vs. inpatient hallway boarding, the following percentages of respondents preferred inpatient boarding with regard to the following 8 items: rest, 85%; safety, 83%; confidentiality, 82%; treatment, 78%; comfort, 79%; quiet, 84%; staff availability, 84%; and privacy, 84%. For no item was there a preference for boarding in the ED. Patients overwhelmingly preferred the inpatient hallway rather than the ED hallway when admitted to the hospital. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Nutrition during lactation

    National Research Council Canada - National Science Library

    Committee on Nutritional Status During Pregnancy and Lactation, Institute of Medicine

    On the basis of a comprehensive literature review and analysis, Nutrition During Lactation points out specific directions for needed research in understanding the relationship between the nutrition...

  18. Electronic inverter assembly

    Science.gov (United States)

    Singh, Brij N.; Schmit, Christopher J.

    2018-05-22

    A first driver portion comprises a set of first components mounted on or associated with a first circuit board. A second circuit board is spaced apart from the first circuit board. A second driver portion comprises a set of second components mounted on or associated with the second circuit board, where the first driver portion and the second driver portion collectively are adapted to provide input signals to the control terminal of each semiconductor switch of an inverter. A first edge connector is mounted on the first circuit board. A second edge connector is mounted on the second circuit board. An interface board has mating edges that mate with the first edge connector and the second edge connector.

  19. Push plate, mounting assembly, circuit board, and method of assembling thereof for ball grid array packages

    Science.gov (United States)

    Vaughn, Mark R.; Montague, Stephen

    2017-05-16

    A push plate that includes springs in the form of cantilever flexures and an inspection window is disclosed. The push plate provides a known, uniform, down force and minimal torque to a package to be tested. The cantilevers have a known, calculable down force producing stiffness. The window provides for viewing of the package during testing.

  20. 49 CFR 1011.2 - The Board.

    Science.gov (United States)

    2010-10-01

    ... TRANSPORTATION GENERAL RULES AND REGULATIONS BOARD ORGANIZATION; DELEGATIONS OF AUTHORITY § 1011.2 The Board. (a... submitted for decision except those assigned to an individual Board Member or employee or an employee board...) The Board may bring before it any matter assigned to an individual Board Member or employee or...

  1. Refinement of boards' role required.

    Science.gov (United States)

    Umbdenstock, R J

    1987-01-01

    The governing board's role in health care is not changing, but new competitive forces necessitate a refinement of the board's approach to fulfilling its role. In a free-standing, community, not-for-profit hospital, the board functions as though it were the "owner." Although it does not truly own the facility in the legal sense, the board does have legal, fiduciary, and financial responsibilities conferred on it by the state. In a religious-sponsored facility, the board fulfills these same obligations on behalf of the sponsoring institute, subject to the institute's reserved powers. In multi-institutional systems, the hospital board's power and authority depend on the role granted it by the system. Boards in all types of facilities are currently faced with the following challenges: Fulfilling their basic responsibilities, such as legal requirements, financial duties, and obligations for the quality of care. Encouraging management and the board itself to "think strategically" in attacking new competitive market forces while protecting the organization's traditional mission and values. Assessing recommended strategies in light of consequences if constituencies think the organization is abandoning its commitments. Boards can take several steps to match their mode of operation with the challenges of the new environment. Boards must rededicate themselves to the hospital's mission. Trustees must expand their understanding of health care trends and issues and their effect on the organization. Boards must evaluate and help strengthen management's performance, rather than acting as a "watchdog" in an adversarial position. Boards must think strategically, rather than focusing solely on operational details. Boards must evaluate the methods they use for conducting business.

  2. What makes great boards great.

    Science.gov (United States)

    Sonnenfeld, Jeffrey A

    2002-09-01

    In the wake of meltdowns at WorldCom, Tyco, and Enron, enormous attention has been focused on the companies' boards. It seems inconceivable that business disasters of such magnitude could happen without gross or even criminal negligence on the part of board members. And yet a close examination of those boards reveals no broad pattern of incompetence or corruption. In fact, they followed most of the accepted standards for board operations: Members showed up for meetings; they had money invested in the company; audit committees, compensation committees, and codes of ethics were in place; the boards weren't too small or too big, nor were they dominated by insiders. In other words, they passed the tests that would normally be applied to determine whether a board of directors was likely to do a good job. And that's precisely what's so scary, according to corporate governance expert Jeffrey Sonnenfeld, who suggests that it's time for some new thinking about how corporate boards operate and are evaluated. He proposes thinking not only about how to structure the board's work but also about how to manage it as a social system. Good boards are, very simply, high-functioning work groups. They're distinguished by a climate of respect, trust, and candor among board members and between the board and management. Information is shared openly and on time; emergent political factions are quickly eliminated. Members feel free to challenge one another's assumptions and conclusions, and management encourages lively discussion of strategic issues. Directors feel a responsibility to contribute meaningfully to the board's performance. In addition, good boards assess their own performance, both collectively and individually.

  3. Currency Boards; The Ultimate Fix?

    OpenAIRE

    Atish R. Ghosh

    1998-01-01

    The growing integration of world capital markets has made it fashionable to argue that only extreme exchange rate regimes are sustainable. Short of adopting a common currency, currency board arrangements represent the most extreme form of exchange rate peg. This paper compares the macroeconomic performance of countries with currency boards to those with other forms of pegged exchange rate regime. Currency boards are indeed associated with better inflation performance, even allowing for potent...

  4. Implementing the board of directors’ mechanism – An empirical study of the listed firms in Libya

    Directory of Open Access Journals (Sweden)

    Jill Atkins

    2018-01-01

    Full Text Available This paper aims to investigate the extent to which board of directors’ mechanism is implemented in Libyan listed companies. This includes a consideration of composition, duties and responsibilities of the board directors. This study employed a questionnaire survey to collect required data from four key stakeholder groups: Boards of Directors (BD, Executive Managers (EM, Regulators and External Auditors (RE and Other Stakeholders (OS. The results of this study provided evidence that Libyan listed companies generally comply with the Libyan Corporate Governance Code (LCGC requirements regarding the board composition: the findings assert that most boards have between three and eleven members, the majority of whom are non-executives and at least two or one-third of whom (whichever is greater are independent. Moreover, the results indicate that general assemblies in Libyan listed companies are practically committed to the LCGC’s requirements regarding the appointment of board members and their length of tenure. The findings provide evidence that boards in Libyan listed companies are carrying out their duties and responsibilities in accordance with internal regulations and laws, as well as the stipulations of the LCGC (2007. Furthermore, the stakeholder groups were broadly satisfied that board members are devoting sufficient time and effort to discharge these duties and responsibilities properly. This study helps to enrich our understanding and knowledge of the current practice of corporate boards as a significant mechanism of corporate governance (CG by being the first to address the board of directors’ mechanism in Libyan listed companies.

  5. Fuel assembly guide tube

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    This invention is directed toward a nuclear fuel assembly guide tube arrangement which restrains spacer grid movement due to coolant flow and which offers secondary means for supporting a fuel assembly during handling and transfer operations

  6. CAD-CAM printed circuit board design

    Science.gov (United States)

    Agy, W. E.

    A step-by-step procedure for a printed circuit design achieved by CAD is presented. The operator at the interactive CRT station moves a stylus across a graphics tablet and intersperses commands which result in computer-generated pictorial forms on the screen that were drawn on the pad. Standard symbols are used for commands allowing, for instance, connections to be made of specific types in certain locations, which can be automatically edited from a materials list. An entire network of drawn lines can be referenced by a signal name for recall, and a finished circuit schematic can be checked for designs rules compliance, including fault reporting in terms of designator/pin number. A map may be present delineating the boundaries of the circuitry area, and previously completed circuitry segments can be recalled for piece-by-piece assembly of the circuit board.

  7. Pension Fund governing board

    CERN Multimedia

    HR Department

    2008-01-01

    On 16 March and 7 May, the Pension Fund Governing Board (PFGB) held its fourth and fifth meetings The first of these meetings was primarily dedicated to the examination of the strategic asset allocation. The PFGB reaffirmed the main goal of the new strategic asset allocation: to improve the Pension Fund’s position with regard to risk by lowering overall portfolio volatility through suitable investments in less volatile asset classes such as real estate and absolute return strategies, where the return does not depend on market trends and negative growth is extremely unlikely. The finalised document will be presented to the Finance Committee and the Council at their June meetings for approval, in accordance with the provisions of the Levaux report. The PFGB also took note of the Internal Audit’s report on Pension Fund operations and decided to refer it to Working Group I as a working document for establishing a control and internal monitoring system for Pension Fund oper...

  8. Polymer Directed Protein Assemblies

    NARCIS (Netherlands)

    van Rijn, Patrick

    2013-01-01

    Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e. g., virus particles. Viruses are a multi-protein assembly of which the morphology is

  9. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sasaki, Y.; Tashima, J.

    1975-01-01

    A description is given of nuclear reactor fuel assemblies arranged in the form of a lattice wherein there is attached to the interface of one of two adjacent fuel assemblies a plate spring having a concave portion curved toward said interface and to the interface of the other fuel assembly a plate spring having a convex portion curved away from said interface

  10. Prevalence and risk factors associated with nutrition-related noncommunicable diseases in the Eastern Mediterranean region

    OpenAIRE

    Musaiger, Abdulrahman O; Al-Hazzaa, Hazzaa M

    2012-01-01

    Abdulrahman O Musaiger1, Hazzaa M Al-Hazzaa21Nutrition and Health Studies Unit, Deanship of Scientific Research, University of Bahrain, Bahrain, and Arab Center for Nutrition, Bahrain; 2Exercise Physiology Laboratory, Department of Physical Education and Movement Science, College of Education, and Scientific Board, Obesity Research Chair, King Saud University, Riyadh, Saudi ArabiaAbstract: This paper reviews the current situation concerning nutrition-related noncommunicable diseases (N-NCDs) ...

  11. Sensor mount assemblies and sensor assemblies

    Science.gov (United States)

    Miller, David H [Redondo Beach, CA

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  12. Nutrient Intake, Physical Activity and Nutritional Status ... - Tamale

    African Journals Online (AJOL)

    It brings to light the higher prevalence of overweight and obesity among female adolescents as a consequence of reduced physical activity. The study also reveals the nutritional deficiencies coupled with reduced physical activity in boarding school students as well as the unhealthy eating habits of day school students.

  13. Annual Report of the United Nations Joint Staff Pension Board. The Report Made In 1974

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1974-11-06

    Pursuant to the requirement in Article 14(a) of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1974 as Supplement No. 9 to the Official Records of the General Assembly: Twenty-Ninth Session (A/9609). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them.

  14. Annual Report of the United Nations Joint Staff Pension Board. The Report made in 1975

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1975-11-27

    Pursuant to the requirement in Article 14(a) of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1975 as Supplement No. 9 to the Official Records of the General Assembly: Thirtieth Session (A/10009). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them.

  15. Annual Report of the United Nations Joint Staff Pension Board. The Report made in 1972

    International Nuclear Information System (INIS)

    1972-01-01

    Pursuant to the requirement in Article 14 of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1972 as Supplement No. 9 to the Official Records of the General Assembly: Twenty-Seventh Session (A/8709). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them

  16. Annual Report of the United Nations Joint Staff Pension Board. The Report Made In 1974

    International Nuclear Information System (INIS)

    1974-01-01

    Pursuant to the requirement in Article 14(a) of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1974 as Supplement No. 9 to the Official Records of the General Assembly: Twenty-Ninth Session (A/9609). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them

  17. Annual Report of the United Nations Joint Staff Pension Board. The Report made in 1975

    International Nuclear Information System (INIS)

    1975-01-01

    Pursuant to the requirement in Article 14(a) of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1975 as Supplement No. 9 to the Official Records of the General Assembly: Thirtieth Session (A/10009). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them

  18. Annual Report of the United Nations Joint Staff Pension Board. The Report made in 1972

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-11-28

    Pursuant to the requirement in Article 14 of the Regulations of the United Nations Joint Staff Pension Fund that the United Nations Joint Staff Pension Board present an annual report to the General Assembly of the United Nations and to the member organizations of the Fund, the United Nations has published the report presented by the Board in 1972 as Supplement No. 9 to the Official Records of the General Assembly: Twenty-Seventh Session (A/8709). The report has thus already been communicated to Governments. However, if any Member should require additional copies, the Secretariat is ready to obtain them.

  19. An Olive Branch for Boards.

    Science.gov (United States)

    Harrington-Lueker, Donna

    1993-01-01

    Peacekeeping strategies for school-board meetings include developing a code of conduct that spells out guidelines for behavior and then enforcing it; bringing in a neutral observer to help board members work through what is really worrying them; and concentrating on policy. (MLF)

  20. General purpose programmable accelerator board

    Science.gov (United States)

    Robertson, Perry J.; Witzke, Edward L.

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  1. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  2. Nuclear fuel string assembly

    International Nuclear Information System (INIS)

    Ip, A.K.; Koyanagi, K.; Tarasuk, W.R.

    1976-01-01

    A method of fabricating rodded fuels suitable for use in pressure tube type reactors and in pressure vessel type reactors is described. Fuel rods are secured as an inner and an outer sub-assembly, each rod attached between mounting rings secured to the rod ends. The two sub-assemblies are telescoped together and positioned by spaced thimbles located between them to provide precise positioning while permittng differential axial movement between the sub-assemblies. Such sub-assemblies are particularly suited for mounting as bundle strings. The method provides particular advantages in the assembly of annular-section fuel pins, which includes booster fuel containing enriched fuel material. (LL)

  3. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Marmonier, Pierre; Mesnage, Bernard; Nervi, J.C.

    1975-01-01

    This invention refers to fuel assemblies for a liquid metal cooled fast neutron reactor. Each assembly is composed of a hollow vertical casing, of regular polygonal section, containing a bundle of clad pins filled with a fissile or fertile substance. The casing is open at its upper end and has a cylindrical foot at its lower end for positioning the assembly in a housing provided in the horizontal diagrid, on which the core assembly rests. A set of flat bars located on the external surface of the casing enables it to be correctly orientated in its housing among the other core assemblies [fr

  4. German versus Nordic Board Models

    DEFF Research Database (Denmark)

    Ringe, Georg

    2016-01-01

    Board structure is an important component of the individual governance of firms, and the appropriateness of the various models is one of the most debated issues in corporate governance today. A comparison of the Nordic and German approaches to the structure of corporate boards reveals stark...... conceptual differences, as emphasized by the 2014 Lekvall Report on the Nordic Corporate Governance Model. This article provides a conceptual comparison between the two approaches to board structure and confirms the fundamental divergence between both models. However, relying on a number of recent legal...... changes and developments in business practice, the article argues that board practices in the two systems effectively blur the structural distinction, and that board organization is converging in practice. It thereby contributes to the broader debates on functionality and comparative corporate law...

  5. 49 CFR 1011.5 - Employee boards.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Employee boards. 1011.5 Section 1011.5... OF TRANSPORTATION GENERAL RULES AND REGULATIONS BOARD ORGANIZATION; DELEGATIONS OF AUTHORITY § 1011.5 Employee boards. This section covers matters assigned to the Accounting Board, a board of employees of the...

  6. GOVERNING BOARD OF THE PENSION FUND

    CERN Multimedia

    2002-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Auditorium on Wednesday 2 October 2002 at 14.30 hrs The Agenda comprises: Opening Remarks (P. Levaux) Recent trends in the technical balance of pension funds (C. Cuénoud) Annual Report 2001: Presentation and results (C. Cuénoud) Copies of the Report are available from divisional secretariats. Position of the CERN Pension Fund with respect to market developments (G. Maurin) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (P. Levaux) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2001 General Assembly are available from the Administration of the Fund (tel.(+4122)767 9194; e-mail Graziella.Praire@cern.ch) SOME ASPECTS OF THE FUND'S ACTIVITIES IN 2001 The Governing Board (at 31 De...

  7. Governing Board of the Pension Fund

    CERN Multimedia

    2004-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Auditorium on Wednesday 6 October 2004 at 14.30 hrs The Agenda comprises: Opening Remarks (J. Bezemer) Results and presentation of the Annual Report 2003, and global situation of provident institutions (C. Cuénoud) Copies of the 2003 Report are available from departmental secretariats. The 2004 Actuarial Study (J.-P. Matheys) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (J. Bezemer) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2003 General Assembly are available from the Administration of the Fund (tel.(+4122)767 27 42; e-mail Sophia.Revol@cern.ch) SOME ASPECTS OF THE FUND'S ACTIVITIES IN 2003 The Governing Board (at 31 December 2003) Members Appointed by J. Be...

  8. Nutrition knowledge and nutritional status of primary school children ...

    African Journals Online (AJOL)

    2010-01-04

    Jan 4, 2010 ... b Research Fellow, CSL, Vaal University of Technology, South Africa ... Keywords: primary school children; nutrition knowledge; nutritional status. Nutrition ... research on basic nutrition education focusing on adolescents has.

  9. The Global Nutrition Report 2014: Actions and Accountability to Accelerate the World’s Progress on Nutrition1–4

    Science.gov (United States)

    Haddad, Lawrence; Achadi, Endang; Bendech, Mohamed Ag; Ahuja, Arti; Bhatia, Komal; Bhutta, Zulfiqar; Blössner, Monika; Borghi, Elaine; Colecraft, Esi; de Onis, Mercedes; Eriksen, Kamilla; Fanzo, Jessica; Flores-Ayala, Rafael; Fracassi, Patrizia; Kimani-Murage, Elizabeth; Koukoubou, Eunice Nago; Krasevec, Julia; Newby, Holly; Nugent, Rachel; Oenema, Stineke; Martin-Prével, Yves; Randel, Judith; Requejo, Jennifer; Shyam, Tara; Udomkesmalee, Emorn; Reddy, K Srinath

    2016-01-01

    In 2013, the Nutrition for Growth Summit called for a Global Nutrition Report (GNR) to strengthen accountability in nutrition so that progress in reducing malnutrition could be accelerated. This article summarizes the results of the first GNR. By focusing on undernutrition and overweight, the GNR puts malnutrition in a new light. Nearly every country in the world is affected by malnutrition, and multiple malnutrition burdens are the “new normal.” Unfortunately, the world is off track to meet the 2025 World Health Assembly (WHA) targets for nutrition. Many countries are, however, making good progress on WHA indicators, providing inspiration and guidance for others. Beyond the WHA goals, nutrition needs to be more strongly represented in the Sustainable Development Goal (SDG) framework. At present, it is only explicitly mentioned in 1 of 169 SDG targets despite the many contributions improved nutritional status will make to their attainment. To achieve improvements in nutrition status, it is vital to scale up nutrition programs. We identify bottlenecks in the scale-up of nutrition-specific and nutrition-sensitive approaches and highlight actions to accelerate coverage and reach. Holding stakeholders to account for delivery on nutrition actions requires a well-functioning accountability infrastructure, which is lacking in nutrition. New accountability mechanisms need piloting and evaluation, financial resource flows to nutrition need to be made explicit, nutrition spending targets should be established, and some key data gaps need to be filled. For example, many UN member states cannot report on their WHA progress and those that can often rely on data >5 y old. The world can accelerate malnutrition reduction substantially, but this will require stronger accountability mechanisms to hold all stakeholders to account. PMID:25740908

  10. 75 FR 4407 - Science Board to the Food and Drug Administration; Notice of Meeting

    Science.gov (United States)

    2010-01-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001... subcommittee reviewing research at the Center for Food Safety and Applied Nutrition. The Science Board will... person on or before Monday, February 15, 2010. Oral presentations from the public will be scheduled...

  11. Association of Regulatory Boards of Optometry

    Science.gov (United States)

    ... website of the Association of Regulatory Boards of Optometry (ARBO). ARBO's web site is designed to provide resources to regulatory boards of optometry throughout the world. State/Provincial/Territorial Boards of ...

  12. 76 FR 21877 - Environmental Management Advisory Board

    Science.gov (United States)

    2011-04-19

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

  13. 78 FR 66384 - Membership of the Merit Systems Protection Board's Performance Review Board

    Science.gov (United States)

    2013-11-05

    ... MERIT SYSTEMS PROTECTION BOARD Membership of the Merit Systems Protection Board's Performance Review Board AGENCY: Merit Systems Protection Board. ACTION: Notice. SUMMARY: Notice is hereby given of the members of the Merit Systems Protection Board's Performance Review Board. DATES: November 5, 2013...

  14. [Survey and analysis of the intakes of energy and macronutrients in rural boarding school students].

    Science.gov (United States)

    Piao, Wei; Wang, Lijuan; Li, Jin; Sun, Jing; Wang, Chen; Li, Ying; Wei, Yanli; Huo, Junsheng; Yang, Xiaoguang

    2016-05-01

    To preliminarily survey the intakes of energy and macronutrients in rural boarding school students and analyse the affect factors of discrepancies between different sex and age groups. A total of 1834 rural boarding junior high school first grade students were selected from 16 provinces, and stratified cluster sampling method was used. The method of weight recording and three days dietary recall were used to investigate the diet of boarding school students. The ratios which reached the EER of energy intakes in boy and girl groups were 37.0% and 46.7% (P 0.05) respectively, and the proportion of the intakes level of EAR among the age groups of 11y ~ and 14y ~ for both boys and girls were 124.8%, 107.3% (P > 0.05) and 134.8%, 112.1% (P 0.05) respectively, and among the age groups of 11y ~ and 14y ~ for both boys and girls were 21.8% and 30.5% (P 0.05) respectively. Double burden of nutrient might exist in the rural boarding schools. The status of nutrition could be improved evidently, by fulfilling the relative national policies, promoting the balance of the nutrition supplying in schools, and enriching the boarding students' knowledge of nutrition.

  15. Nutrition and athletic performance

    Science.gov (United States)

    Exercise - nutrition; Exercise - fluids; Exercise - hydration ... Bird R. Nutrition. In: Miller MD, Thompson SR, eds. DeLee and Drez's Orthopaedic Sports Medicine . 4th ed. Philadelphia, PA: Elsevier Saunders; ...

  16. Nutrition and OI

    Science.gov (United States)

    Nutrition and OI Introduction To promote bone development and optimal health, children and adults with osteogenesis imperfecta ( ... no foods or supplements that will cure OI. Nutrition Related Problems Difficulties eating solid food have been ...

  17. Nutrition.gov

    Science.gov (United States)

    ... Gov Sites FAQ Contact Us En Español Search Nutrition.Gov Search all USDA Advanced Search Browse by ... FAQs USDA Research, Education, and Economics Resources Welcome Nutrition.gov is a USDA-sponsored website that offers ...

  18. Total parenteral nutrition - infants

    Science.gov (United States)

    ... medlineplus.gov/ency/article/007239.htm Total parenteral nutrition - infants To use the sharing features on this page, please enable JavaScript. Total parenteral nutrition (TPN) is a method of feeding that bypasses ...

  19. Total parenteral nutrition

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000177.htm Total parenteral nutrition To use the sharing features on this page, please enable JavaScript. Total parenteral nutrition (TPN) is a method of feeding that bypasses ...

  20. Living with COPD: Nutrition

    Science.gov (United States)

    ... Diseases > Lung Disease Lookup > COPD > Living With COPD Nutrition and COPD Most people are surprised to learn ... asking your doctor or visiting the Academy of Nutrition and Dietetics at EatRight.org . Be sure to ...

  1. Cooking utensils and nutrition

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002461.htm Cooking utensils and nutrition To use the sharing features on this page, please enable JavaScript. Cooking utensils can have an effect on your nutrition. ...

  2. Nutrition and Myasthenia Gravis

    Science.gov (United States)

    Good nutrition is important for everyone. This is especially true when you have a chronic disorder like myasthenia gravis ( ... difficulty with chewing and swallowing may interfere with nutrition and create safety issues. Diet modifications may be ...

  3. General Assembly discusses progress report from IAEA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-01-15

    According to its Statute and the Relationship Agreement with the United Nations, the International Atomic Energy Agency reports annually to the General Assembly of the United Nations on its activities during the past year. The Report is prepared for the approval of the General Conference by the Board of Governors. The second of these reports was presented by the Director General, Mr. Sterling Cole, on behalf of the Agency on October 30th 1958; delegates from thirteen countries took part in the ensuing debate. The Report covers the period 1 November 1957 to the end of June 1958 with some more recent developments mentioned briefly in the Preface. (author)

  4. Stroke Prevention & Treatment: Diet & Nutrition

    Science.gov (United States)

    ... Prevention & Treatment: Diet & Nutrition Stroke Prevention & Treatment: Diet & Nutrition A healthy diet can reduce your risk for ... Treatment How does a stroke affect eating and nutrition? Stroke can devastate a person's nutritional health because ...

  5. Nutrition support in hospitals

    DEFF Research Database (Denmark)

    Kondrup, Jens

    2005-01-01

    Nutrition support in hospitals is becoming an area of focus because of the evidence showing improved clinical outcome with nutrition support, its status as a human rights issue and its integration into quality assurance.......Nutrition support in hospitals is becoming an area of focus because of the evidence showing improved clinical outcome with nutrition support, its status as a human rights issue and its integration into quality assurance....

  6. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  7. Diet and Nutrition

    Science.gov (United States)

    ... Stories Español Eye Health / Tips & Prevention Food and Nutrition Sections Diet and Nutrition Can Fish Oil Help ... Cataract Prevention in the Produce Aisle Diet and Nutrition Leer en Español: Dieta y nutrición May. 24, ...

  8. Nutrition Guide for Toddlers

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Nutrition Guide for Toddlers KidsHealth / For Parents / Nutrition Guide ... español Guía de nutrición para sus hijos pequeños Nutrition Through Variety Growth slows somewhat during the toddler ...

  9. Public Health Nutrition Education

    DEFF Research Database (Denmark)

    Torheim, Liv Elin; Birgisdottir, Bryndis Eva; Robertson, Aileen

    2016-01-01

    , Oslo, Norway, 2Unit for Nutrition Research, Landspitali University Hospital , 3Department of Food Science and Nutrition, University of Iceland, Reykjavik, Iceland, 4Global Nutrition and Health, Metropolitan University College, Copenhagen, Denmark, 5School of Hospitality, culinary arts and meal science...

  10. Nutrition for Sport Success.

    Science.gov (United States)

    Nutrition Foundation, Inc., Washington, DC.

    This guidebook presents basic facts about nutrition, focusing upon the nutritional needs of athletes. Information is given on: (1) the importance of water, salt and other electrolytes, and treating and preventing heat disorders; (2) nutrition for training and performance, the best diet, caloric and energy requirements for various and specific…

  11. Fuel assembly storage pool

    International Nuclear Information System (INIS)

    Hiranuma, Hiroshi.

    1976-01-01

    Object: To remove limitation of the number of storage of fuel assemblies to increase the number of storage thereof so as to relatively reduce the water depth required for shielding radioactive rays. Structure: Fuel assembly storage rack containers for receiving a plurality of spent fuel assembly racks are stacked in multi-layer fashion within a storage pool filled with water for shielding radioactive rays and removing heat. (Furukawa, Y.)

  12. Target Assembly Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Target Assembly Facility integrates new armor concepts into actual armored vehicles. Featuring the capability ofmachining and cutting radioactive materials, it...

  13. Composite turbine bucket assembly

    Science.gov (United States)

    Liotta, Gary Charles; Garcia-Crespo, Andres

    2014-05-20

    A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

  14. An agenda for board research

    Directory of Open Access Journals (Sweden)

    Sandra Guerra

    2008-01-01

    Full Text Available Scholarly investigations on the board of directors, although intense from the mid-1990s onward, did not lead to entirely convincing results. This study proposes discussion on building a multidisciplinary and integrated theoretical framework able to capture the complexity and distinctive dimensions of the board as a group decision-making process. This is achieved through an essay developed from analytical and descriptive review of the literature. A synthesis on board research is presented, aiming to understand theoretical models lenses used to study corporate governance issues. The strengths and weaknesses of these models are pointed out, and their influence on board investigation is observed. This essay concludes by proposing a research agenda that considers the addition of psychological and sociological approaches to economic models of the analysis of group decision-making

  15. Specialty Board on Fluency Disorders

    Science.gov (United States)

    ... or large groups of speech-language pathologists. Speech-language pathologists who are Board Certified Specialists in Fluency may be found on this website by searching name, city(location) or zip code. ...

  16. Investor Perceptions of Board Performance

    DEFF Research Database (Denmark)

    Fischer, Paul E.; Gramlich, Jeffrey D.; Miller, Brian P.

    2009-01-01

    This paper provides evidence that uncontested director elections provide informative polls of investor perceptions regarding board performance. We find that higher (lower) vote approval is associated with lower (higher) stock price reactions to subsequent announcements of management turnovers. In...

  17. Employee on Boarding Process Automation

    OpenAIRE

    Khushboo Nalband; Priyanka Jadhav; Geetanjali Salunke

    2017-01-01

    On boarding, also known as organizational socialization, plays a vital role in building the initial relationship between an organization and an employee. It also contributes to an employees’ satisfaction, better performance and greater organizational commitment thus increasing an employees’ effectiveness and productivity in his/her role. Therefore, it is essential that on boarding process of an organization is efficient and effective to improve new employees’ retention. Generally this on boar...

  18. Enteral nutrition in surgery

    International Nuclear Information System (INIS)

    Sucha, R.; Lichvarova, I.; Duchon, R.; Dolnik, J.; Pindak, D.

    2011-01-01

    Enteral feeding provides physiologic, metabolic, safety, and cost benefits over parenteral nutrition. There are various ways enteral nutritional is administered and scheduled. The method of administration must be individualized to each patient's specific needs. Enteral nutrition is not only the supply of exogenous substrates and to prevent depletion of endogenous sources. Today the enteral nutrition becomes part of a therapeutic strategy to influence the severity of the disease to affect the function of GIT, and to modulate immune responses of the gut and the whole organism. Early enteral nutrition in the postoperative period reduces the risk of infectious complications. (author)

  19. Measure Guideline: Three High Performance Mineral Fiber Insulation Board Retrofit Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, Ken [Building Science Corporation, Westford, MA (United States)

    2015-01-01

    This Measure Guideline describes a high performance enclosure retrofit package that uses mineral fiber insulation board. The Measure Guideline describes retrofit assembly and details for wood frame roof and walls and for cast concrete foundations. This Measure Guideline is intended to serve contractors and designers seeking guidance for non-foam exterior insulation retrofit.

  20. Measure Guideline: Three High Performance Mineral Fiber Insulation Board Retrofit Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, K. [Building Science Corporation, Westford, MA (United States)

    2015-01-01

    This Measure Guideline describes a high performance enclosure retrofit package that uses mineral fiber insulation board, and is intended to serve contractors and designers seeking guidance for non-foam exterior insulation retrofit processes. The guideline describes retrofit assembly and details for wood frame roof and walls and for cast concrete foundations.

  1. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Delafosse, Jacques.

    1977-01-01

    This invention relates to a nuclear fuel assembly for a light or heavy water reactor, or for a fast reactor of the kind with a bundle of cladded pins, maintained parallel to each other in a regular network by an assembly of separate supporting grids, fitted with elastic bearing surfaces on these pins [fr

  2. Assembling Transgender Moments

    Science.gov (United States)

    Greteman, Adam J.

    2017-01-01

    In this article, the author seeks to assemble moments--scholarly, popular, and aesthetic--in order to explore the possibilities that emerge as moments collect in education's encounters with the needs, struggles, and possibilities of transgender lives and practices. Assembling moments, the author argues, illustrates the value of "moments"…

  3. Vertical pump assembly

    International Nuclear Information System (INIS)

    Dohnal, M.; Rosel, J.; Skarka, V.

    1988-01-01

    The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

  4. Fuel Assembly Damping Summary

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kanghee; Kang, Heungseok; Oh, Dongseok; Yoon, Kyungho; Kim, Hyungkyu; Kim, Jaeyong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper summary the fuel assembly damping data in air/in still water/under flow, released from foreign fuel vendors, compared our data with the published data. Some technical issues in fuel assembly damping measurement testing are also briefly discussed. Understanding of each fuel assembly damping mechanisms according to the surrounding medium and flow velocity can support the fuel design improvement in fuel assembly dynamics and structural integrity aspect. Because the upgraded requirements of the newly-developed advanced reactor system will demands to minimize fuel design margin in integrity evaluation, reduction in conservatism of fuel assembly damping can contribute to alleviate the fuel design margin for sure. Damping is an energy dissipation mechanism in a vibrating mechanical structure and prevents a resonant structure from having infinite vibration amplitudes. The sources of fuel assembly damping are various from support friction to flow contribution, and it can be increased by the viscosity or drag of surrounding fluid medium or the average velocity of water flowing. Fuel licensing requires fuel design evaluation in transient or accidental condition. Dynamic response analysis of fuel assembly is to show fuel integrity and requires information on assembly-wise damping in dry condition and under wet or water flowing condition. However, damping measurement test for the full-scale fuel assembly prototype is not easy to carry out because of the scale (fuel prototype, test facility), unsteadiness of test data (scattering, random sampling and processing), instrumentation under water flowing (water-proof response measurement), and noise. LWR fuel technology division in KAERI is preparing the infra structure for damping measurement test of full-scale fuel assembly, to support fuel industries and related research activities. Here is a preliminary summary of fuel assembly damping, published in the literature. Some technical issues in fuel assembly damping

  5. Self-assembled nanostructures

    CERN Document Server

    Zhang, Jin Z; Liu, Jun; Chen, Shaowei; Liu, Gang-yu

    2003-01-01

    Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. Self-Assembled Nanostructures provides systematic coverage of basic nanomaterials science including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from physical to chemical and biological systems, Self-Assembled Nanostructures is the essential reference or text for scientists involved with nanostructures.

  6. FPGA development board for applications in cosmic rays physics

    International Nuclear Information System (INIS)

    Angelov, Ivo; Damov, Krasimir; Dimitrova, Svetla

    2013-01-01

    The modern experiments in cosmic rays and particle physics are usually performed with large number of detectors and signal processing have to be done by complex electronics. The analog signals from the detectors are converted to digital (by discriminators or fast ADC) and connected to different type of logic implemented in FPGA (Field Programmable Gate Arrays). A FPGA development board based on Xilinx XC3S50AN was designed, assembled and tested. The board will be used for developing a modern registering controller (to replace the existing now) for the muon telescope in the University and can be used for other experiments in cosmic rays physics when fast digital pulses have to be processed. Keywords: FPGA, Spartan3A, muon telescope, cosmic rays variations

  7. Presidential Search: An Overview for Board Members

    Science.gov (United States)

    Association of Governing Boards of Universities and Colleges, 2012

    2012-01-01

    The selection of a president is a governing board's most important responsibility, and the search process is the board's best opportunity to help guide its institution into a successful new era. This guide outlines the leadership roles during a search (those of the board, the board chair, the search committee, and others), briefs board…

  8. Bringing out the Best Board Behavior

    Science.gov (United States)

    Caruso, Nicholas

    2004-01-01

    The author's advice for for a school board superintendent is to assume incompetence instead of malevolence. Board members who behave inappropriately are a minority, and those with malicious intent are extremely rare. Most misbehaving board members act out of frustration. They may not understand the appropriate role of a board member.…

  9. 22 CFR 902.3 - Board staff.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Board staff. 902.3 Section 902.3 Foreign Relations FOREIGN SERVICE GRIEVANCE BOARD ORGANIZATION § 902.3 Board staff. The chairperson shall select the Board's executive secretary and other staff provided for in the Act. The executive secretary and staff...

  10. Advisory Boards: Gateway to Business Engagement

    Science.gov (United States)

    Meeder, Hans; Pawlowski, Brett

    2012-01-01

    Interest has been growing in how to build or manage an effective business advisory board. Developing an advisory board is crucial to keeping CTE programs relevant and viable by engaging the support of business and industry. This article delves into how to build and manage a board, and how to re-energize boards that already exist but may be lacking.

  11. Milk and dairy products presence in boarding school meals in Croatia

    Directory of Open Access Journals (Sweden)

    Jasenka Gajdoš Kljusurić

    2003-01-01

    Full Text Available Nutritive quality and variety of food intake are the most important issues for young people growing and developing. Nutritional habits of each individual are also very important. High values of proteins, mineral matters and vitamins in milk show the importance of milk consumption in meals for children and young people.In order to gain a precise insight into nutritive status of young people in Croatian boarding schools, a "closed type group" was selected. The examined groups included girls and boys at the age of 14-18 years, accommodated in 39 boarding schools. The questionnaires, organised in order to determine preferences in consumption of different food groups including milk and dairy products, are conducted as well. From the meals analysed one can recommend the improvements in meal preferences. Average values per day showed that 52 % of girls and 63 % of boys consume milk and dairy products only if includedin boarding school meals. Only 27 % of girls and 21 % of boys consumed milk or dairy products on daily basis. Results of milk and dairy product preferences are different with regards to different regions of Croatia. Region 3, Lika and Gorski Kotar, shows the highest values of dairy products consumption. The aim of the work is to determine quality of the energy and nutritive intake by nutrition analysis, and to determine nutritional irregularities with a special reference to milk and dairy products consumption. Furthermore, nutritional improvements, by including the results of meal preferences in accordance with the needs and DRI recommendations considering gender and age, are proposed.

  12. The new Board of Governors

    International Nuclear Information System (INIS)

    1964-01-01

    Full text: Miss Blanche Margaret Meagher was elected chairman of the IAEA Board of Governors for 1964-65, after the new Board had been constituted at the Eighth Session of the General Conference in September. Since 1962 Miss Meagher has been Canadian Ambassador to Austria, and Canadian Governor of the Agency. Miss Meagher joined the Canadian Department of External Affairs in 1942, and has held a number of foreign diplomatic appointments; she has also served on Canadian delegations to the UN Educational, Scientific and Cultural Organization, the International Telecommunication Union, the Economic and Social Council of UN and the UN Disarmament Sub-Committee. The Vice-Chairmen of the Board are Mr. Wilhelm Billig (Poland) and Mr. Hassan M. Tohamy (UAR). Mr. Billig is Chairman of the State Council for Atomic Energy, and High Commissioner for Peaceful Uses of Atomic Energy. Mr. Tohamy is Ambassador to Austria, and Resident Representative to the Agency. Of the twelve elected members of the Board, five were chosen by the General Conference in 1964 for two years, viz. Argentina, Chile, Netherlands, Thailand and the United Arab Republic. Seven were elected in 1963: Afghanistan, China, Congo (Leopoldville), Morocco, Romania, Switzerland and Uruguay. The remaining thirteen members have been designated by the Board: Australia, Belgium, Brazil, Canada, Finland, France, India, Japan, Poland, South Africa, USSR, United Kingdom and United States. (author)

  13. Sports Nutrition Knowledge among Mid-Major Division I University Student-Athletes

    Directory of Open Access Journals (Sweden)

    Ashley Andrews

    2016-01-01

    Full Text Available Competitive athletes have goals to optimize performance and to maintain healthy body composition. Sports nutrition is a component of training programs often overlooked by student-athletes and their coaches. The purpose of this study was to examine student-athletes’ sports nutrition knowledge across sex, class level, team, and completion of prior nutrition coursework. Participants included 123 mid-major Division I university student-athletes (47 females and 76 males from baseball, softball, men’s soccer, track and field, and tennis. The student-athletes completed a survey questionnaire to determine adequate sports nutrition knowledge (mean ≥ 75%. The overall mean sports nutrition knowledge score for the student-athletes was 56.9% which was considered inadequate sports nutrition knowledge (mean < 75%. Only 12 student-athletes achieved adequate sports nutrition knowledge score of 75% or higher. There were no differences by sex, class level, team, and completion of prior nutrition coursework. Student-athletes’ inadequate sports nutrition knowledge may place them at nutrition risk, lead to impaired performance, and affect their lean body mass and energy levels. Athletics personnel should not assume student-athletes have adequate sports nutrition knowledge. Athletic departments may make available a board certified Sports Dietitian or Registered Dietitian and offer classroom or online courses facilitating student-athletes to optimize nutrition knowledge and behaviors.

  14. Optimizing patient nutrition

    DEFF Research Database (Denmark)

    Geiker, Nina Rica Wium

    (Paper I). The present study is, to my knowledge, the only study investigating the validity of performed nutritional risk screenings by comparing them with medical records. Eight per cent of patients were correctly screened for nutritional risk. A total of 24% of 2393 patients were nutritionally screened......Malnutrition, under-nutrition and/or obesity, may develop due to disease but may also cause disease. The prevalence of under-nutrition among hospitalized patients is high: 40-60% are either already under-nourished on admittance or at-risk of becoming malnourished. As in the general population...... of prescription medication, and take longer to recover. Acknowledging the adverse effects of malnutrition on health, since 2006 it has been mandatory to screen all patients for nutritional risk within 24 hours of admittance at all hospitals in the Capital Region, Denmark. The compliance to and the validity...

  15. Controlling electronics boards with PVSS

    CERN Document Server

    Jacobsson, Richard

    2005-01-01

    This paper addresses several aspects of implementing a control system for electronics boards in order to perform remote Field Programmable Gate Array (FPGA) programming, hardware configuration, register control, and monitoring, as well as interfacing it to an expert system. The paper presents an implementation, using the Distributed Information Management (DIM) package and the industrial SCADA system PVSS II from ETM, in which the access mechanisms to the board resources are completely generic and in which the device prescription and the handling of mapping between functional parameters and physical registers follow a common structure independent of the board type. The control system also incorporates mechanisms by which it may be controlled from a finite state machine based expert system. Finally the paper suggests an improvement in which the mapping between logical parameters and physical registers is represented by descriptors in the device description such that the translation can be handled by a common m...

  16. Segregation in a Galton Board

    International Nuclear Information System (INIS)

    Benito, J G; Vidales, A M; Ippolito, I

    2009-01-01

    This work deals with a numerical study of the problem of separation of particles with different elastic properties. The separation procedure uses a Galton Board which consist in a bidimensional system of obstacles arranged in a triangular lattice. Disks of equal diameters but different elastic properties are launched from the top of the device. The Galton Board is commonly used for mixing particles, but here, we intend to find special conditions under which one can use it as a segregating device. We introduce a mixture of particles and generate, through simulations, different conditions to favor the segregation process based on the different elastic coefficients of the particles. We inspect which is the best configuration of size, density of obstacles and wall separation to favor the separations of particles. Our results prove that the Galton Board can be used as a segregation device under certain conditions.

  17. Institutional Evolution and Corporate Boards

    DEFF Research Database (Denmark)

    Chen, Victor Zitian; Hobdari, Bersant; Sun, Pei

    2014-01-01

    We argue that corporate boards are a dynamic repository of human- and social capital in response to external institutional evolution. Theoretically, integrating institutional economics, agency theory and resource dependence theory, we explain that evolution of market-, legal- and political......, since the board changes are typically proposed by the block shareholders, whose motivation for doing so is closely associated with a corporation’s financial performance, we further argue that financial performance is a key moderator of the relationships between institutional evolution and changes...... institutions restructures the particular context in which board members play their two primary roles: monitoring the CEO on behalf of the shareholders, suggested by the agency theory, and supporting the CEO by providing resources, knowledge and information, suggested by the resource dependence theory...

  18. TPX assembly plan

    International Nuclear Information System (INIS)

    Knutson, D.

    1993-01-01

    The TPX machine will be assembled in the TFTR Test Cell at the Plasma Physics Laboratory, utilizing the existing TFTR machine foundation. Preparation of the area for assembly will begin after completion of the decontamination and decommissioning phase on TFTR and certification that the radiation levels remaining, if any, are consistent with the types of operations planned. Assembly operations begin with the arrival of the first components, and conclude, approximately 24 months later, with the successful completion of the integrated systems tests and the achievement of a first plasma

  19. Nuclear reactor control assembly

    International Nuclear Information System (INIS)

    Negron, S.B.

    1991-01-01

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

  20. The Nutrition Club Approach: Community Mobilization to Prevent Child Malnutrition

    International Nuclear Information System (INIS)

    Nugyen, Anh Vu

    2014-01-01

    Full text: Objective: To establish a scalable and sustainable, community led approach to prevent and manage child malnutrition, and increase vulnerable families’ access to food security. Methods: The establishment of the nutrition club is a participatory community mobilization process involving local leaders including the Women’s Union, Farmers Union and Youth Union, local health workers and caregivers of young children. The first step in the process is the formation of district and commune management boards and community development boards. This is followed by a training needs assessment and capacity strengthening of local partners. Nutrition club facilitators are selected by the community and are widely respected and committed to community service. Monthly nutrition club meetings are attended by pregnant women and caregivers of children under five years old. Activities during the nutrition club meeting includes: care and nutrition during pregnancy and the post partum period, complementary feeding, child care practices, development of home gardens and hygiene and sanitation; using interactive facilitation methods such as games, skills practice, role plays and competitions. Follow up home visits are conducted to reinforce positive practices and support vulnerable families. Caregivers who attend the nutrition club have access to community led interest groups such as: chicken raising, livelihoods, agriculture and micro-credit schemes. Nutrition club members pay a small monthly fee that covers cost of refreshments and utilities. Monitoring and supervision is conducted by a team of government district and health center staff. Sustainability of the approach is promoted by mobilizing and utilizing existing resources. An agreement is made between the community development board and World Vision that support for running costs will gradually be reduced and discontinued after four years. The alignment of the nutrition club approach with government policy and priorities

  1. Availability, Location, and Format of Nutrition Information in Fast-food Chain Restaurants in Ontario, Canada.

    Science.gov (United States)

    Hobin, Erin; Lebenbaum, Michael; Rosella, Laura; Hammond, David

    2015-03-01

    To assess the availability, location, and format of nutrition information in fast-food chain restaurants in Ontario. Nutrition information in restaurants was assessed using an adapted version of the Nutrition Environment Measures Study for Restaurants (NEMS-R). Two raters independently visited 50 restaurants, 5 outlets of each of the top-10 fast-food chain restaurants in Canada. The locations of the restaurants were randomly selected within the Waterloo, Wellington, and Peel regions in Ontario, Canada. Descriptive results are presented for the proportion of restaurants presenting nutrition information by location (e.g., brochure), format (e.g., use of symbols), and then by type of restaurant (e.g., quick take-away, full-service). Overall, 96.0% (n = 48) of the restaurants had at least some nutrition information available in the restaurant. However, no restaurant listed calorie information for all items on menu boards or menus, and only 14.0% (n = 7) of the restaurants posted calorie information and 26.0% (n = 13) of restaurants posted other nutrients (e.g., total fat) for at least some items on menus boards or menus. The majority of the fast-food chain restaurants included in our study provided at least some nutrition information in restaurants; however, very few restaurants made nutrition information readily available for consumers on menu boards and menus.

  2. The budget and the Board

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-01-15

    On 3 November 1959, the General Assembly of the United Nations considered the annual report of the International Atomic Energy Agency, the first report to cover a full operational year of the Agency - 1 July 1959 to 30 June 1959, more recent developments having been summarized in a preface. At the end of the debate the Assembly adopted a resolution, submitted jointly by Czechoslovakia, the Union of South Africa and the United Arab Republic, taking note of the report

  3. Board's system of publications. [National Radiological Protection Board

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, M J [National Radiological Protection Board, Harwell (UK)

    1978-07-01

    The purpose of each of the several classes of publication issued by the National Radiological Protection Board is stated. The classes are: advice on standards for protection, emergency reference levels, technical reports, instrument evaluation reports, annual research and development reports, three-yearly reports on the work of the NRPB, miscellaneous specialist booklets, publications for the layman, radiological protection bulletin, information sheets, and brochures.

  4. The Board's Role in Financial Oversight. AGB Board Essentials Series

    Science.gov (United States)

    Krawitz, Natalie

    2015-01-01

    An often-volatile economy, changing demographics, and technological innovations in educational delivery are among the dramatic changes across higher education that have forced boards and institutions to question the viability of the existing business model. Flat or declining state support in real terms, lower investment returns in some years,…

  5. Nutritional assessment of athletes

    National Research Council Canada - National Science Library

    Driskell, Judy A; Wolinsky, Ira

    2011-01-01

    "Evaluating dietary intake, determining energy metabolism, and conducting other nutritional assessments are essential in understanding the relationships between diet, exercise, health, and physical...

  6. Introduction to clinical nutrition

    National Research Council Canada - National Science Library

    Sardesai, Vishwanath M

    2012-01-01

    .... Introduction to Clinical Nutrition, Third edition discusses the physiologic and metabolic interrelationships of all nutrients and their roles in health maintenance and the prevention of various...

  7. What Is Enteral Nutrition?

    Science.gov (United States)

    ... Solution Center NOVEL Project Parenteral Nutrition Resources Intravenous Lipid Emulsions (ILE) Video Series SmartPN Practice and Research Toolkits Publications & ASPEN Journals Journal of Parenteral and ...

  8. European consumers and nutrition labelling

    DEFF Research Database (Denmark)

    Wills, Josephine M.; Grunert, Klaus G.; Celemín, Laura Fernández

    2009-01-01

    Nutrition labelling of food in Europe is not compulsory, unless a nutrition or health claim is made for the product. The European Commission is proposing mandatory nutrition labelling, even front of pack labelling with nutrition information. Yet, how widespread is nutrition labelling in the EU...

  9. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1980-01-01

    A bimetallic spacer means is cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The bimetallic spacer means in one embodiment of the invention includes a space grid formed, at least principally, of zircaloy to the external surface of which are attached a plurality of stainless steel strips. In another embodiment the strips are attached to fuel pins. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. (author)

  10. Fuel assembly spacer

    International Nuclear Information System (INIS)

    Shirakawa, Ken-etsu.

    1988-01-01

    Purpose: To reduce the pressure loss of coolants by fuel assembly spacers. Constitution: Spacers for supporting a fuel assembly are attached by means of a plurality of wires to an outer frame. The outer frame is made of shape memory alloy such that the wires are caused to slacken at normal temperature and the slacking of the wires is eliminated in excess of the transition temperature. Since the wires slacken at the normal temperature, fuel rods can be inserted easily. After the insertion of the fuel rods, when the entire portion or the outer frame is heated by water or gas at a predetermined temperature, the outer frame resumes its previously memorized shape to tighten the wires and, accordingly, the fuel rods can be supported firmly. In this way, since the fuel rods are inserted in the slacken state of the wires and, after the assembling, the outer frame resumes its memorized shape, the assembling work can be conducted efficiently. (Kamimura, M.)

  11. Nuclear reactor spacer assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1979-01-01

    A fuel assembly for a nuclear reactor is disclosed wherein the fuel element receiving and supporting grid is comprised of a first metal, the guide tubes which pass through the grid assembly are comprised of a second metal and the grid is supported on the guide tubes by means of expanded sleeves located intermediate the grid and guide tubes. The fuel assembly is fabricated by inserting the sleeves, of initial outer diameter commensurate with the guide tube outer diameters, through the holes in the grid assembly provided for the guide tubes and thereafter expanding the sleeves radially outwardly along their entire length such that the guide tubes can subsequently be passed through the sleeves. The step of radial expansion, as a result of windows provided in the sleeves having dimensions commensurate with the geometry of the grid, mechanically captures the grid and simultaneously preloads the sleeve against the grid whereby relative motion between the grid and guide tube will be precluded

  12. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Vikhorev, Yu.V.; Biryukov, G.I.; Kirilyuk, N.A.; Lobanov, V.N.

    1977-01-01

    A fuel assembly is proposed for nuclear reactors allowing remote replacement of control rod bundles or their shifting from one assembly to another, i.e., their multipurpose use. This leads to a significant increase in fuel assembly usability. In the fuel assembly the control rod bundle is placed in guide tube channels to which baffles are attached for fuel element spacing. The remote handling of control rods is provided by a hollow cylinder with openings in its lower bottom through which the control rods pass. All control rods in a bundle are mounted to a cross beam which in turn is mounted in the cylinder and is designed for grasping the whole rod bundle by a remotely controlled telescopic mechanism in bundle replacement or shifting. (Z.M.)

  13. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Betten, P.R.

    1976-01-01

    Under the invention the fuel assembly is particularly suitable for liquid metal cooled fast neutron breeder reactors. Hence, according to the invention a fuel assembly cladding includes inward corrugations with respect to the remainder of the cladding according to a recurring pattern determined by the pitch of the metal wire helically wound round the fuel rods of the assembly. The parts of the cladding pressed inwards correspond to the areas in which the wire encircling the peripheral fuel rods is generally located apart from the cladding, thereby reducing the play between the cladding and the peripheral fuel rods situated in these areas. The reduction in the play in turn improves the coolant flow in the internal secondary channels of the fuel assembly to the detriment of the flow in the peripheral secondary channels and thereby establishes a better coolant fluid temperature profile [fr

  14. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sakurai, Shungo; Ogiya, Shunsuke.

    1990-01-01

    In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

  15. Food & Nutrition: Nourish Your Body

    Science.gov (United States)

    Food & Nutrition: Nourish Your Body; food & nutrition; food and nutrition; food and nutrition articles; information about nutrition; health & nutrition; health and nutrition; health and nutrition articles; health and nutrition facts; health nutrition; nutrition and health; nutrition health; nutrition health articles; healthy; a healthy diet; diet healthy; eating healthy; healthy diet; healthy diets; nutrition diet; diet and nutrition; diet and nutrition articles; diet and nutrition article; diet nutrition; nutrition and diet; article on nutrition; article about nutrition; articles on nutrition; facts about nutrition; good nutrition; nutrition article; nutrition articles; healthy tips; eat healthy tips; eating healthy tips; healthy diet tips; healthy eating tip; healthy eating tips; healthy food tips; should eat; reasons why you should eat healthy; why people should eat healthy; why should I eat healthy; why should people eat healthy; why should we eat healthy; why should you eat healthy; why we should eat healthy; why you should eat healthy; healthy diet; a healthy diet; diets healthy eating; eat a healthy diet; eat healthy diet; eating a healthy diet; eating healthy diet; eating healthy diets; healthy diet; way to eat; best way to eat healthy; easy way to eat healthy; easy ways to eat healthy; healthy way of eating; healthy way to eat; healthy ways of eating; healthy ways to eat; ways to eat healthy; benefits; benefits eating healthy; benefits for eating healthy; benefits from eating healthy; benefits of eating healthy; benefits of healthy eating; benefits on eating healthy; benefits to eating healthy; eating healthy benefits; health benefits of eating healthy; eat healthier; eat healthier; eating healthier; healthier eating; healthier ways to eat; how can I eat healthier; how do I eat healthier; how to eat healthier; how to start eating healthier; tips to eat healthier; ways to start eating healthier

  16. Immediate preoperative enteral nutrition (preoperative enteral nutrition

    Directory of Open Access Journals (Sweden)

    Lađević Nebojša

    2017-01-01

    Full Text Available Nutritional support of surgical patients is a necessary part of the treatment. It alone cannot cure the disease but it significantly affects the recovery of patients and supports surgical interventions. Patients in malnutrition have shown to have significantly more postoperative infectious and non-infectious complications. This significantly prolongs treatment time and increases costs. However, there is one fact that cannot be expressed in money, which is the patient's impression of the surgical intervention. Adequate preoperative patient support, based on the intake of liquid nutritive solutions, reduces preoperative stress and deflects the metabolic response. Now, it is recommended for adults and children older than one year to drink clear liquid up to 2 hours before induction in anesthesia. Appropriate enteral nutrition has a significant place in the postoperative recovery of patients. Enteral nutrition is reducing complications, mainly infectious complications because the function of the digestive system as one large immune system is preserved. Perioperative enteral nutrition is a necessary part of the modern treatment of surgical patients. In addition to the significant effect on the occurrence of postoperative complications, it is also important that this type of diet improves the psychological status of patients.

  17. The French coal board and French society

    International Nuclear Information System (INIS)

    Ladoucette, Ph. de

    2004-01-01

    On 19 April 1946 the French national assembly passed a law for nationalizing the mineral fuel industry by a vote of 516 against only 31. 'Charbonnages de France' (CDF), the French coal board, was created and prospects were promising. During the reconstruction period (1945 - 1960), coal industry was a pillar of the French economy, the production of coal had been steadily growing to reach its top in 1958 with 59 Mt. The sixties showed the beginning of the decline of coal to the benefit of oil, natural gas and later nuclear energy. As early as 1967 CDF had a policy of promoting new industries in regions of mines in order to break down the mono-industry scheme and to favor staff conversion massively. In 1947 the number of people on the payroll of CDF was 360.000, this number was decreasing steadily to reach 23.000 in 1990. In 2004 the last deep mine to work in France was closed down. This article tells the story of coal mining in France by describing its ups and downs and by assessing its social impact

  18. Fuel assembly reconstitution

    International Nuclear Information System (INIS)

    Morgado, Mario M.; Oliveira, Monica G.N.; Ferreira Junior, Decio B.M.; Santos, Barbara O. dos; Santos, Jorge E. dos

    2009-01-01

    Fuel failures have been happened in Nuclear Power Plants worldwide, without lost of integrity and safety, mainly for the public, environment and power plants workers. The most common causes of these events are corrosion (CRUD), fretting and pellet cladding interaction. These failures are identified by increasing the activity of fission products, verified by chemical analyses of reactor coolant. Through these analyses, during the fourth operation cycle of Angra 2 Nuclear Power Plant, was possible to observe fuel failure indication. This indication was confirmed in the end of the cycle during the unloading of reactor core through leakage tests of fuel assembly, using the equipment called 'In Mast Sipping' and 'Box Sipping'. After confirmed, the fuel assembly reconstitution was scheduled, and happened in April, 2007, where was identified the cause and the fuel rod failure, which was substitute by dummy rods (zircaloy). The cause was fretting by 'debris'. The actions to avoid and prevent fuel assemblies failures are important. The goals of this work are to describe the methodology of fuel assembly reconstitution using the FARE (Fuel Assembly Reconstitution Equipment) system, to describe the results of this task in economic and security factors of the company and show how the fuel assembly failures are identified during operation and during the outage. (author)

  19. Polymer Directed Protein Assemblies

    Directory of Open Access Journals (Sweden)

    Patrick van Rijn

    2013-05-01

    Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

  20. The importance of board independence

    NARCIS (Netherlands)

    Zijl, N.J.M.

    2012-01-01

    Although the attributed importance of board independence is high, a clear definition of independence does not exist. Furthermore, the aim and consequences of independence are the subject of discussion and empirical evidence about the impact of independence is weak and disputable. Despite this lack

  1. Joint Advisory Appeals Board report

    CERN Document Server

    Lalande, Amanda

    2018-01-01

    With regard to the internal appeal procedure, Article R VI 1.18 of the Staff Rules and Regulations states that unless the member of the personnel objects, (the) decision and report of the JAAB (Joint Advisory Appeals Board) shall be brought to the attention of the members of the personnel.

  2. Faculty Communication with Governing Boards

    Science.gov (United States)

    Tiede, Hans-Joerg

    2013-01-01

    College and university governance works best when every constituency within the institution has a clear understanding of its role with respect to the other constituencies. It works best when communication among the governing board, the administration, and the faculty (not to mention the staff and students) is regular, open, and honest. Too often…

  3. The Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Shultz, R.J.

    1980-01-01

    Certain aspects of the Atomic Energy Control Board's relationships with Cabinet, the Minister, Government officials, The licensees and the public are analyzed. The way some of the relationships would have been modified by the Nuclear Control and Administration Act proposed in 1977 is examined. (L.L.)

  4. Assessing Your Board's Risk Tolerance

    Science.gov (United States)

    Griswold, John S.; Jarvis, William F.

    2014-01-01

    In the wake of the financial crisis, trustees of many endowed nonprofit institutions realized that their portfolio was riskier than they thought and their own ability to tolerate loss wasn't as strong as they imagined. What can board and investment committee members do to improve their ability to assess their--and their institution's--capacity for…

  5. Internationalilzation of the Firm and its Board

    DEFF Research Database (Denmark)

    Oxelheim, Lars; Gregoric, Aleksandra; Randøy, Trond

    competencies required by firm internationalization positively affect board internationalization, whereas the impact of the internationalization of a firm’s commercial operations is positive but not significant across all model specifications. We find that the higher the number of national board members......, the amount of foreigners on the nomination committee also positively relates to the number of foreigners on the board. Rather than age, the median board tenure negatively impacts the prevalence of foreigners on the supervisory board. This barrier to board internationalization may reflect conservatism, fear...

  6. Human Assisted Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    CALTON,TERRI L.; PETERS,RALPH R.

    2000-01-01

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be a perfectly valid operations, but in reality the operations cannot physically be carried out by a human. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications; however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem HFFMs must be integrated with automated assembly planning to allow engineers to verify that assembly operations are possible and to see ways to make the designs even better. Factories will very likely put humans and robots together in cooperative environments to meet the demands for customized products, for purposes including robotic and automated assembly. For robots to work harmoniously within an integrated environment with humans the robots must have cooperative operational skills. For example, in a human only environment, humans may tolerate collisions with one another if they did not cause much pain. This level of tolerance may or may not apply to robot-human environments. Humans expect that robots will be able to operate and navigate in their environments without collisions or interference. The ability to accomplish this is linked to the sensing capabilities available. Current work in the field of cooperative

  7. Diet and Nutrition (Parkinson's Disease)

    Science.gov (United States)

    ... Living With Parkinson's › Managing Parkinson's › Diet & Nutrition Diet & Nutrition 1. Maintain Health 2. Ease PD Symptoms 3. ... your team Seek reliable information about diet and nutrition from your medical team and local resources. Please ...

  8. Systems biology of personalized nutrition

    NARCIS (Netherlands)

    Ommen, B. van; Broek, T. van den; Hoogh, I. de; Erk, M. van; Someren, E. van; Rouhani-Rankouhi, T.; Anthony, J.C.; Hogenelst, K.; Pasman, W.; Boorsma, A.; Wopereis, S.

    2017-01-01

    Personalized nutrition is fast becoming a reality due to a number of technological, scientific, and societal developments that complement and extend current public health nutrition recommendations. Personalized nutrition tailors dietary recommendations to specific biological requirements on the

  9. [Nutrition and oropharyngeal cancer

    NARCIS (Netherlands)

    Kampman, E.

    2008-01-01

    The conclusion of a recent systematic review of the literature on the relation between nutrition, physical activity and cancer is that more than 30% of all cases of cancer can be prevented by improving nutrition and increasing physical activity. In The Netherlands, 1 out of 100 men and 1 out of 160

  10. Nutrition and allergic diseases

    NARCIS (Netherlands)

    Neerven, van R.J.J.; Savelkoul, Huub

    2017-01-01

    The development of IgE-mediated allergic diseases is influenced by many factors, including genetic and environmental factors such as pollution and farming, but also by nutrition. In the last decade, substantial progress has been made in our understanding of the impact that nutrition can have on

  11. Geological impacts on nutrition

    Science.gov (United States)

    This chapter reviews the nutritional roles of mineral elements, as part of a volume on health implications of geology. The chapter addresses the absorption and post-absorptive utilization of the nutritionally essential minerals, including their physiological functions and quantitative requirements....

  12. Insects and human nutrition

    DEFF Research Database (Denmark)

    Roos, Nanna

    2018-01-01

    Despite high diversity in species as well as metamorphological life-­stages, edible insects are essentially an animal-source food contributing high quality protein and fat when viewed in the context of human nutrition. The nutritional contribution of insects to diets in populations where insects ...

  13. You Score With Nutrition

    Science.gov (United States)

    Dow, Ruth McNabb

    1976-01-01

    The leader's guide and student activity booklet contain learning activities, ideas, information, games, and resources for nutrition instruction designed to appeal to the interests of teens and pre-teens and to improve their knowledge of nutrition and their eating habits. (MS)

  14. Nutrition in adolescent pregnancy.

    Science.gov (United States)

    Lenders, C M; McElrath, T F; Scholl, T O

    2000-06-01

    Prevention of unintended adolescent pregnancy is a primary goal of the American Academy of Pediatrics and of many health providers. Nevertheless, many adolescents become pregnant every year in America. Pediatricians therefore should be aware of nutritional recommendations for pregnant adolescents to provide optimal care. The importance of nutrition during pregnancy is here reviewed from a pediatric perspective. Pregnancy, particularly during adolescence, is a time of extreme nutritional risk. The adolescents most likely to become pregnant are often those with inadequate nutritional status and unfavorable socio-economic background. There is increasing evidence of competition for nutrients between the growing pregnant adolescent and her fetus. Also, the prenatal environment has been implicated in the development of obesity, cardiovascular disease, and diabetes in both the mother and her offspring. Many adolescents have poor diet quality and poor knowledge of appropriate nutrition; these habits may not change during pregnancy. Current knowledge and recommendations regarding the intake of energy, calcium, and folate are discussed in detail.

  15. Good maternal nutrition

    DEFF Research Database (Denmark)

    Breda, Joao; Robertson, Aileen

    This publication has three parts: •a summary of the results of a systematic review of the most recent evidence on maternal nutrition, the prevention of obesity and noncommunicable diseases; •a review of existing recommendations for nutrition, physical activity and weight gain during pregnancy...... in European countries; and •lists of possible opportunities for action in European countries. The overview and exploration of the national recommendations for nutrition, physical activity and weight gain during pregnancy are based on the results of a survey in which 51 of the 53 Member States in the WHO....... These are opportunities to promote nutrition and health throughout the life-course, ensure optimal diet-related fetal development and reduce the impact of morbidity and risk factors for noncommunicable diseases by improving maternal nutrition....

  16. Dynamic behaviour of diagnostic assemblies

    International Nuclear Information System (INIS)

    Pecinka, L.

    1980-01-01

    The methodology is shown of calculating the frequency spectrum of a diagnostic assembly. The oscillations of the assembly as a whole, of a fuel rod bundle, the assembly jacket and of the individual rods in the bundle were considered. The manufacture is suggested of a model assembly which would be used for testing forced vibrations using an experimental water loop. (M.S.)

  17. Why monetary board: Monetary board and endogenic price flexibility

    Directory of Open Access Journals (Sweden)

    Bašić Tamara

    2004-01-01

    Full Text Available The paper presents a model which proves that a unilateral exchange rate fixing, i.e. monetary board, as opposed to certain opinions, is an optimal policy since it increases flexibility of nominal prices, which is the ultimate goal of a flexible exchange rate policy. A suitable calibration of the model shows that the higher the initial price flexibility, the lower the difference needed for "utility increase" in getting the producers to switch from fixed to flexible prices. The results obtained in all cases indicate that exchange rate fixing increases price flexibility, which proves that a unilateral exchange rate fixing, i.e. monetary board, could be an optimal monetary policy.

  18. Board members’ contribution to strategy: The mediating role of board internal processes

    Directory of Open Access Journals (Sweden)

    Carmen Barroso-Castro

    2017-05-01

    Full Text Available This study aims to explore what directors do on the board, to what extent the processes occurring in the board allow the sharing and integrating of the existing knowledge, thus facilitating the board members’ contributions to strategy. We adopt the view that the internal board processes increase the impact of the cognitive resources on board performance. Using survey data from 200 large Spanish companies we demonstrate that directors’ level of knowledge of the firm and board job-related diversity positively influence the degree of the board's strategic involvement. Additionally, the internal processes that take place within the board – particularly Cognitive Conflict, the Critical and Independent Approach and the Comprehensive Discussion Process – influence the board's strategic involvement and play a partial mediating role on the aforementioned relationships. However, our results show no evidence for a positive relationship between Board Meeting Dynamics and the board's strategic involvement.

  19. Boys' boarding school management: understanding the choice ...

    African Journals Online (AJOL)

    Maggard,. 1976). Kotler ... positioning strategy for a secondary boys' boarding school should seek to match its .... (in this case, the attributes parents consider important in boarding school selection), ..... Marketing for Hospitality and Tourism (3rd ed).

  20. 76 FR 57712 - Performance Review Board Membership

    Science.gov (United States)

    2011-09-16

    ... DEPARTMENT OF COMMERCE Performance Review Board Membership AGENCY: Economics and Statistics... the Performance Review Board (PRB) in accordance with the Economics and Statistics Administration's.... Bostic, Jr., Arnold A. Jackson, Theodore A. Johnson, Steven J. Jost, J. Steven Landefeld, Jennifer Madans...

  1. 7 CFR 1230.4 - Board.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PORK PROMOTION, RESEARCH, AND CONSUMER INFORMATION Pork Promotion, Research, and Consumer Information Order Definitions § 1230.4 Board. Board means...

  2. 7 CFR 1215.2 - Board.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POPCORN PROMOTION, RESEARCH, AND CONSUMER INFORMATION Popcorn Promotion, Research, and Consumer Information Order Definitions § 1215.2 Board. Board...

  3. American Board of Obesity Medicine (ABOM)

    Science.gov (United States)

    ... not trained in how to manage it. The American Board of Obesity Medicine certifies physicians looking to bridge this gap. ... an ABOM diplomate. APPLY NOW OUR MISSION The American Board of Obesity Medicine (ABOM) serves the public and the field ...

  4. Sustainability issues in circuit board recycling

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech; Alting, Leo; Baldo, Gian Luca

    1995-01-01

    The resource recovery and environmental impact issues of printed circuit board recycling by secondary copper smelters are discussed. Guidelines concerning material selection for circuit board manufacture and concerning the recycling processes are given to enhance recovery efficiency and to lower...

  5. Fuel assembly inspection device

    International Nuclear Information System (INIS)

    Yaginuma, Yoshitaka

    1998-01-01

    The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

  6. Diet and Nutrition

    Science.gov (United States)

    ... foods highest in copper content: organ meats, shellfish, chocolate, nuts, and mushrooms. Once copper levels have stabilized ... it can be added. Send Email About WDA History of WDA Board of Directors Medical Advisory Committee ...

  7. ChalkBoard: Mapping Functions to Polygons

    Science.gov (United States)

    Matlage, Kevin; Gill, Andy

    ChalkBoard is a domain specific language for describing images. The ChalkBoard language is uncompromisingly functional and encourages the use of modern functional idioms. ChalkBoard uses off-the-shelf graphics cards to speed up rendering of functional descriptions. In this paper, we describe the design of the core ChalkBoard language, and the architecture of our static image generation accelerator.

  8. Corporate boards and bank loan contracting

    OpenAIRE

    Francis, Bill; Hasan, Iftekhar; Koetter, Michael; Wu, Qiang

    2012-01-01

    We investigate the role of corporate boards in bank loan contracting. We find that when corporate boards are more independent, both price and nonprice loan terms (e.g., interest rates, collateral, covenants, and performance-pricing provisions) are more favorable, and syndicated loans comprise more lenders. In addition, board size, audit committee structure, and other board characteristics influence bank loan prices. However, they do not consistently affect all nonprice loan terms except for a...

  9. Cultural differences and board gender diversity

    OpenAIRE

    Carrasco , Amélia; Francoeur , Claude; Réal , Isabelle; Laffarga , Joaquina; Ruiz-Barbadillo , Emiliano

    2012-01-01

    International audience; As evidence of the continuing interest raised by "board gender diversity", major studies (Catalyst, 2008; World Economic Forum, 2010; European Board Diversity Analysis, 2010) were recently carried out and have all led to reports confirming the imbalance of women on boards and the need to address this issue. Moreover, our analysis of these reports indicates that the low proportion of women observed on corporate boards varies across countries, which raises the question a...

  10. Blade attachment assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  11. Reactor and fuel assembly

    International Nuclear Information System (INIS)

    Ishii, Yoshihiko; Bessho, Yasunori; Sano, Hiroki; Yokomizo, Osamu; Yamashita, Jun-ichi.

    1990-01-01

    The present invention realizes an effective spectral operation by applying an optimum pressure loss coefficient while taking the characteristics of a lower tie plate into consideration. That is, the pressure loss coefficient of the lower tie plate is optimized by varying the cross sectional area of a fuel assembly flow channel in the lower tie plate or varying the surface roughness of a coolant flow channel in the lower tie plate. Since there is a pressure loss coefficient to optimize the moderator density over a flow rate change region, the effect of spectral shift rods can be improved by setting the optimum pressure loss coefficient of the lower tie plate. According to the present invention, existent fuel assemblies can easily be changed successively to fuel assemblies having spectral shift rods of a great spectral shift effect by using existent reactor facilities as they are. (I.S.)

  12. Power module assembly

    Science.gov (United States)

    Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  13. Magnetic nanoparticle assemblies

    CERN Document Server

    Trohidou, Kalliopi N

    2014-01-01

    Magnetic nanoparticles with diameters in the range of a few nanometers are today at the cutting edge of modern technology and innovation because of their use in numerous applications ranging from engineering to biomedicine. A great deal of scientific interest has been focused on the functionalization of magnetic nanoparticle assemblies. The understanding of interparticle interactions is necessary to clarify the physics of these assemblies and their use in the development of high-performance magnetic materials. This book reviews prominent research studies on the static and dynamic magnetic properties of nanoparticle assemblies, gathering together experimental and computational techniques in an effort to reveal their optimized magnetic properties for biomedical use and as ultra-high magnetic recording media.

  14. Reactor fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1980-01-01

    A nuclear reactor fuel assembly having a lower end fitting and actuating means interacting therewith for holding the assembly down on the core support stand against the upward flow of coolant. Locking means for interacting with projections on the support stand are carried by the lower end fitting and are actuated by the movement of an actuating rod operated from above the top of the assembly. In one embodiment of the invention the downward movement of the actuating rod forces a latched spring to move outward into locking engagement with a shoulder on the support stand projections. In another embodiment, the actuating rod is rotated to effect the locking between the end fitting and the projection. (author)

  15. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Hayashi, Hiroshi; Watari, Yoshio; Hizahara, Hiroshi; Masuoka, Ryuzo.

    1970-01-01

    When exchanging nuclear fuel assemblies during the operation of a nuclear reactor, melting of fuel bodies, and severence of tubular claddings is halted at the time of insertion by furnishing a neutron absorbing material such as B 10 , Cd, Gd or the like at the forward end of the fuel assembly to thereby lower the power peak at the forward ends of the fuel elements to within tolerable levels and thus prevent both fuel liquification and excessive expansion. The neutron absorbing material may be attached in the form of a plate to the fuel assembly forward tie plate, or may be inserted as a pellet into the front end of the tubular cladding. (Owens, K.J.)

  16. Liaison based assembly design

    Energy Technology Data Exchange (ETDEWEB)

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  17. Integrated magnetic transformer assembly

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

  18. From Global Firms to Global Boards?

    DEFF Research Database (Denmark)

    Thomsen, Steen; Gregoric, Aleksandra; Randøy, Trond

    2011-01-01

    . This indicates some support for the view that different kinds of firm internationalization – commercial versus financial - might lead to different types of board internationalization. We find no evidence that the internationalization of boards is limited by the conservatism of existing national board members...

  19. Fermilab Friends for Science Education | Board Tools

    Science.gov (United States)

    Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Board Tools Testimonials Our Donors Board of Directors Board Tools Calendar Join Us Donate Now Get FermiGear! Education FFSE Scholarship Tools Google Drive Join Us/Renew Membership Forms: Online - Print Support Us Donation

  20. 42 CFR 426.489 - Board remands.

    Science.gov (United States)

    2010-10-01

    ... decision; and (2) Explains why the case is being remanded and the specific actions ordered by the Board. (b) Action by an ALJ on remand. An ALJ takes any action that is ordered by the Board and may take any additional action that is not inconsistent with the Board's remand order. ...

  1. Advisory Board on Alcoholism and Drug Abuse

    Science.gov (United States)

    State Employees Advisory Board on Alcoholism and Drug Abuse DHSS State of Alaska Home Divisions and ; Advisory Board on Alcoholism and Drug Abuse Page Content Alison Kulas Executive Director If you, a family Kulas Begins Tenure as Executive Director The Advisory Board on Alcoholism and Drug Abuse, The Alaska

  2. 75 FR 11870 - Inland Waterways Users Board

    Science.gov (United States)

    2010-03-12

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  3. 78 FR 44934 - Inland Waterways Users Board

    Science.gov (United States)

    2013-07-25

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  4. 75 FR 57264 - Inland Waterways Users Board

    Science.gov (United States)

    2010-09-20

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  5. 76 FR 11216 - Inland Waterways Users Board

    Science.gov (United States)

    2011-03-01

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  6. 78 FR 72070 - Inland Waterways Users Board

    Science.gov (United States)

    2013-12-02

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  7. 77 FR 69447 - Inland Waterways Users Board

    Science.gov (United States)

    2012-11-19

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Inland Waterways Users Board AGENCY: Department of the Army, U.S. Army Corps of Engineers, DoD. ACTION: Notice of open meeting... is made of the forthcoming meeting. Name of Committee: Inland Waterways Users Board (Board). Date...

  8. Transfer of fuel assemblies

    International Nuclear Information System (INIS)

    Vuckovich, M.; Burkett, J. P.; Sallustio, J.

    1984-01-01

    Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If the strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly

  9. Introductory Statement to Board of Governors, 2 June 2014, Vienna, Austria

    International Nuclear Information System (INIS)

    Amano, Y.

    2014-01-01

    Since the last meeting of the Board, two countries have applied for membership of the Agency: the Republic of Djibouti and the Union of the Comoros. A number of important reports are on the agenda of this meeting. The Agency's Annual Report for 2013 serves as the Board's report to the General Conference, as well as the Agency's report to the United Nations General Assembly and the general public. As the report shows, the Agency's programme continues to make a real difference to the lives of many people throughout the world

  10. Development of an anti-flood board to protect the interiors and exteriors of the infrastructure

    Science.gov (United States)

    Petru, Michal; Srb, Pavel; Sevcik, Ladislav; Martinec, Tomas; Kulhavy, Petr

    2018-06-01

    This article deals with the development of an anti-flood board to protect the interior and exterior of various infrastructures, such a houses, cottages or industrial buildings. It was designed prototypes and assembled numerical simulations. In Central Europe and in particular in the Czech Republic, floods are an integral part of the natural water cycle and cause great loss of life and great property damage. The development of new types of mobile anti-flood boards is very important as the design solution is developed for flood protection with regard to minimizing weight, cost of production, easy manipulation, simplicity and speed of installation.

  11. VISUALISERINGSTAVLA : Visualisering av Kanban boards

    OpenAIRE

    Y. F. Sam, Adam

    2013-01-01

    Hos många företag används whiteboards för att visualisera arbetsprocessen. En vanlig metodik för detta är så kallade Kanban boards, ett system av tabeller och lappar för att indikera olika avvikelser eller moment i projekt med datum och annan relevant information. Företag kan även välja att använda en mjukvara som simulerar samma metodik, ett exempel på detta är så kallade Elektroniska kanban boards. I detta arbete har båda dessa metoder (whiteboard samt en digital lösning) observerats hos tr...

  12. Issues in Canadian board transparency

    Directory of Open Access Journals (Sweden)

    Chris Bart

    2007-01-01

    Full Text Available Transparency is considered one of the principles of good corporate governance. But what does it mean – in practice – especially when it comes to Board transparency – i.e. the ability of shareholders to gain knowledge about an organization’s corporate governance practices in order to make an informed assessment of Directors’ individual and collective roles and performance. In a preliminary investigation of Board transparency practices in Canadian listed firms (using data from 2003-2004, it was found that there were wide variations in the nature and quantity of corporate governance practices disclosed. The reasons for these variations are discussed and a number of recommendations for improved disclosure are presented.

  13. Neutron detector assembly

    International Nuclear Information System (INIS)

    Hanai, Koi; Shirayama, Shinpei.

    1978-01-01

    Purpose: To prevent gamma-ray from leaking externally passing through the inside of a neutron detector assembly. Constitution: In a neutron detector assembly having a protection pipe formed with an enlarged diameter portion which serves also as a spacer, partition plates with predetermined width are disposed at the upper and the lower portions in this expanded portion. A lot of metal particles are filled into spaces formed by the partition plates. In such a structure, the metal particles well-absorb the gamma-rays from above and convert them into heat to provide shielding for the gamma-rays. (Horiuchi, T.)

  14. Assembling RNA Nanoparticles.

    Science.gov (United States)

    Xiao, Shou-Jun

    2017-01-01

    RNA nanoparticles are designed and self-assembled according to noncanonical interactions of naturally conserved RNA motifs and/or canonical Watson-Crick base-pairing interactions, which have potential applications in gene therapy and nanomedicine. These artificially engineered nanoparticles are mainly synthesized from in vitro transcribed RNAs, purified by denaturing and native polyacrylamide gel electrophoresis (PAGE), and characterized with native PAGE, AFM, and TEM technologies. The protocols of in vitro transcription, denaturing and native PAGE, and RNA nanoparticle self-assembly are described in detail.

  15. Assembling an aesthetic.

    Science.gov (United States)

    Candela, Emily

    2012-12-01

    Recent research informing and related to the study of three-dimensional scientific models is assembled here in a way that explores an aesthetic, specifically, of touch. I concentrate on the materiality of models, drawing on insights from the history and philosophy of science, design and metaphysics. This article chronicles the ways in which touch, or material interactions, operate in the world of 3D models, and its role in what models mean and do. I end with a call for greater attention to scientific process, described as assembly of and within science, which is revealed by this focus on touch. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    The nuclear fuel assembly described includes a cluster of fuel elements supported at a distance from each other so that their axes are parallel in order to establish secondary channels between them reserved for the coolant. Several ducts for an auxiliary cooling fluid are arranged in the cluster. The wall of each duct is pierced with coolant ejection holes which are placed circumferentially to a pre-determined pattern established according to the position of the duct in the cluster and by the axial distance of the ejection hole along the duct. This assembly is intended for reactors cooled by light or heavy water [fr

  17. The Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Doern, G.B.

    1976-01-01

    This study describes and assesses the regulatory and administrative processes and procedures of the Atomic Energy Control Board, the AECB. The Atomic Energy Control Act authorized the AECB to control atomic energy materials and equipment in the national interest and to participate in measures for the international control of atomic energy. The AECB is authorized to make regulations to control atomic energy materials and equipment and to make grants in support of atomic energy research. (author)

  18. Who's who on the Board

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    Brief summaries of the curriculum vitae and present positions held by each member of the National Radiological Protection Board are given. The members are Sir Richard Southwood, Mr. A.M. Allen, Professor A. Barret, Professor J.H. Edwards, Professor H.J. Evans, Professor K.J. Evans, Professor P. Haggett, Professor J.R. Lee, Professor J.S. Orr, Dr. R. Owen, Professor J. Peto, Dr. D.H. Roberts and Mr. M.E. Trowbridge. (U.K.)

  19. 14 CFR 250.5 - Amount of denied boarding compensation for passengers denied boarding involuntarily.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Amount of denied boarding compensation for passengers denied boarding involuntarily. 250.5 Section 250.5 Aeronautics and Space OFFICE OF THE SECRETARY... boarding compensation for passengers denied boarding involuntarily. (a) Subject to the exceptions provided...

  20. Motives and Power of School Board Members: Implications for School Board-Superintendent Relationships

    Science.gov (United States)

    Mountford, Meredith

    2004-01-01

    The qualitative study presented in this article explores motivations for school board membership and conceptions of power held by school board members. The findings of the study suggest a relationship exists between the way board members define power and the type of motivation board members have for service. The implications of these findings for…

  1. 75 FR 9196 - Letter From Secretary of Energy Accepting Defense Nuclear Facilities Safety Board (Board...

    Science.gov (United States)

    2010-03-01

    ... DEPARTMENT OF ENERGY Letter From Secretary of Energy Accepting Defense Nuclear Facilities Safety Board (Board) Recommendation 2009-2 AGENCY: Department of Energy. ACTION: Notice. SUMMARY: The...: The Department of Energy (DOE) acknowledges receipt of Defense Nuclear Facilities Safety Board (Board...

  2. 76 FR 52997 - Public Company Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for...

    Science.gov (United States)

    2011-08-24

    ... Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for Allocation of the Board's... August 18, 2011. I. Introduction On June 21, 2011, the Public Company Accounting Oversight Board (the... public accounting firm, in amounts that are sufficient to cover the costs of processing and reviewing...

  3. The Perceptions of Georgia School Board Members' Need for Training on School Board Governance

    Science.gov (United States)

    Nutt, Pamela Studdard

    2010-01-01

    This study explored the perceptions of training needs of school board members in Georgia. The study examined perceptions of school board chairs, board members with 1 to 5 years experience, members with 6 to 10 years experience, members with 11 to 15 years experience and board members with 16 plus years experience in the areas of school board…

  4. Nutrition and Imagenology

    International Nuclear Information System (INIS)

    Rodriguez Allende, Miguel Angel

    2003-01-01

    In this article we present the close, although little explored, relationship between Nutrition and Imagenology, relying mainly on an important number of images which will allow us to explain all the ways an Imagenology can influence upon the nutritional support of a patient.We primarily emphasize the diagnostic aspects of non-operated patients, as well as of those who have undergone surgical treatment, by showing both normality and the resulting surgical complications. We finally describe several interventionist Imagenology techniques used to achieve an adequate enteral nutrition

  5. Integrated reporting and board features

    Directory of Open Access Journals (Sweden)

    Rares HURGHIS

    2017-02-01

    Full Text Available In the last two decades the concept of sustainability reporting gained more importance in the companies’ annual reports, a trend which is embedded also in integrated reporting. Issuing an integrated report became a necessity, because the report explains to the investors how the organization creates value over time. The governance structure, more exactly the board of directors, decides whether or not the company will issue an integrated report. Thus, are there certain features of the board that might influence the issue of an integrated report? Do the companies which issue an integrated report have certain features of the governance structure? Looking for an answer to these questions, we seek for any possible correlations between a disclosure index and the corporate governance structure characteristics, on a sample from the companies participating at the International Integrated Reporting Council Examples Database. The results highlight that only the size of the board influences the extent to which the issued integrated report is in accordance with the International Framework.

  6. Fire resistant PV shingle assembly

    Science.gov (United States)

    Lenox, Carl J.

    2012-10-02

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  7. [Modular enteral nutrition in pediatrics].

    Science.gov (United States)

    Murillo Sanchís, S; Prenafeta Ferré, M T; Sempere Luque, M D

    1991-01-01

    Modular Enteral Nutrition may be a substitute for Parenteral Nutrition in children with different pathologies. Study of 4 children with different pathologies selected from a group of 40 admitted to the Maternal-Childrens Hospital "Valle de Hebrón" in Barcelona, who received modular enteral nutrition. They were monitored on a daily basis by the Dietician Service. Modular enteral nutrition consists of modules of proteins, peptides, lipids, glucids and mineral salts-vitamins. 1.--Craneo-encephalic traumatisms with loss of consciousness, Feeding with a combination of parenteral nutrition and modular enteral nutrition for 7 days. In view of the tolerance and good results of the modular enteral nutrition, the parenteral nutrition was suspended and modular enteral nutrition alone used up to a total of 43 days. 2.--55% burns with 36 days of hyperproteic modular enteral nutrition together with normal feeding. A more rapid recovery was achieved with an increase in total proteins and albumin. 3.--Persistent diarrhoea with 31 days of modular enteral nutrition, 5 days on parenteral nutrition alone and 8 days on combined parenteral nutrition and modular enteral nutrition. In view of the tolerance and good results of the modular enteral nutrition, the parenteral nutrition was suspended. 4.--Mucoviscidosis with a total of 19 days on modular enteral nutrition, 12 of which were exclusively on modular enteral nutrition and 7 as a night supplement to normal feeding. We administered proteic intakes of up to 20% of the total calorific intake and in concentrations of up to 1.2 calories/ml of the final preparation, always with a good tolerance. Modular enteral nutrition can and should be used as a substitute for parenteral nutrition in children with different pathologies, thus preventing the complications inherent in parenteral nutrition.

  8. Hospital board effectiveness: relationships between board training and hospital financial viability.

    Science.gov (United States)

    Molinari, C; Morlock, L; Alexander, J; Lyles, C A

    1992-01-01

    This study examined whether hospital governing boards that invest in board education and training are more informed and effective decision-making bodies. Measures of hospital financial viability (i.e., selected financial ratios and outcomes) are used as indicators of hospital board effectiveness. Board participation in educational programs was significantly associated with improved profitability, liquidity, and occupancy levels, suggesting that investment in the education of directors is likely to enhance hospital viability and thus increase board effectiveness.

  9. Nutrition screening: science behind simplicity

    African Journals Online (AJOL)

    Nutrition screening triggers entry into the nutrition care process.1 Screening has informally been described as simple, quick or low-intensity proxy for more complex procedures. More formal definitions for the nutrition setting have been proposed, describing nutrition screening as a process of identifying patients, clients, or ...

  10. Turbomachine blade assembly

    Science.gov (United States)

    Garcia Crespo, Andres Jose

    2016-11-01

    Embodiments of the present disclosure include a system comprising a turbomachine blade assembly having a blade portion, a shank portion, and a mounting portion, wherein the blade portion, the shank portion, and the mounting portion comprise a first plurality of plies extending from a tip of the airfoil to a base of the dovetail.

  11. Fuel sub-assembly

    International Nuclear Information System (INIS)

    Jolly, R.

    1982-01-01

    A fuel sub-assembly for a liquid metal cooled nuclear reactor is described in which the bundle of fuel pins are braced apart by a series of spaced grids. The grids at the lower end are capable of yielding, thus allowing pins swollen by irradiation to be withdrawn with a reduced risk of damage. (U.K.)

  12. Nanoparticle assemblies and superstructures

    National Research Council Canada - National Science Library

    Kotov, Nicholas A

    2006-01-01

    ... building blocks of larger and more complex systems. Therefore, the present challenge of nanoscale science is to shift from making certain building blocks to organizing them in one-, two-, and three-dimensional structures. Such assemblies and superstructures are the next logical step in the development of nanoscience and nanotechnology. In this re...

  13. Spool assembly support analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the pump pit spool assemblies. Hand calculations were used for the analysis. UBC, AISC, and load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  14. Nanotechnology: A molecular assembler

    Science.gov (United States)

    Kelly, T. Ross; Snapper, Marc L.

    2017-09-01

    The idea of nanometre-scale machines that can assemble molecules has long been thought of as the stuff of science fiction. Such a machine has now been built -- and might herald a new model for organic synthesis. See Letter p.374

  15. Macroscopic magnetic Self assembly

    NARCIS (Netherlands)

    Löthman, Per Arvid

    2018-01-01

    Exploring the macroscopic scale's similarities to the microscale is part and parcel of this thesis as reflected in the research question: what can we learn about the microscopic scale by studying the macroscale? Investigations of the environment in which the self-assembly takes place, and the

  16. Assembling Sustainable Territories

    DEFF Research Database (Denmark)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    that territorialisation is accomplished not just through (re)defining bounded space, but more broadly through the assembling of four elements: space, subjects, objects, and expertise. Four case studies of sustainability certification in seafood are analyzed to show that ‘green gabbing’ is not necessarily the central...

  17. Assembling sustainable territories

    NARCIS (Netherlands)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    The authors show how certification assembles ‘sustainable’ territories through a complex layering of regulatory authority in which both government and nongovernment entities claim rule-making authority, sometimes working together, sometimes in parallel, sometimes competitively. It is argued that

  18. Turneri preemia 2015: Assemble

    Index Scriptorium Estoniae

    2015-01-01

    Turneri 2015. aasta preemia pälvis radikaalne noorte arhitektide kollektiiv Assemble. Rühmitus on 18-liikmeline ja baseerub Ida-Londonis ning selle tegevust võib üldistatult nimetada hüljatud ruumide taaselustamiseks kogukondlike aktsioonide kaudu

  19. Industrial Assembly Cases

    DEFF Research Database (Denmark)

    Ellekilde, Lars-Peter; Buch, Jacob Pørksen; Iversen, Thorbjørn Mosekjær

    This technical report presents 13 different industrial assembly tasks, which are composed of 70 different operations. The report is written to provide an overview and do as such not contain product specific information such as object weights, dimensions etc. The operations are classified into a set...

  20. Biosynthesis: Reprogramming assembly lines

    Science.gov (United States)

    Menon, Binuraj R. K.; Jenner, Matthew

    2018-03-01

    Rational engineering of biosynthetic assembly lines for production of new compounds is an attractive prospect, yet it presents many challenges. Learning from biology, some of the rules for expanding the chemical diversity of non-ribosomal peptides have been uncovered in two recent studies.

  1. Lageos assembly operation plan

    Science.gov (United States)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  2. Assembly of primary cilia

    DEFF Research Database (Denmark)

    Pedersen, Lotte B; Veland, Iben R; Schrøder, Jacob M

    2008-01-01

    knowledge about IFT is based on studies performed in Chlamydomonas and Caenorhabditis elegans. Therefore, our review of the IFT literature includes studies performed in these two model organisms. The role of several non-IFT proteins (e.g., centrosomal proteins) in the ciliary assembly process is also...... discussed. Developmental Dynamics, 2008. (c) 2008 Wiley-Liss, Inc....

  3. Food and Nutrition Service

    Science.gov (United States)

    ... Perdue Pledges Support on the Long Road to Recovery 4/5 USDA Continues Disaster Assistance in Puerto Rico USDA is continuing its efforts to address the nutrition needs of Puerto Rican residents affected by Hurricanes ...

  4. Nutrition in children posttransplantation

    African Journals Online (AJOL)

    status and to detect, prevent and treat late-onset complications such as obesity ... potential, prevent further liver injury, promote liver regeneration, minimise risk of infection and .... Campos ACL, Matias JEF and Coelho JCU. Nutritional Aspects ...

  5. Dairy goat nutrition

    Directory of Open Access Journals (Sweden)

    Bruno Ronchi

    2011-02-01

    Full Text Available Good goat nutrition is fundamental to the success and sustainability of dairy goat farming in terms of economics, goat health, high quality products, and minimizing environmental impact.

  6. Liver Transplant: Nutrition

    Science.gov (United States)

    ... Liver Transplant: Nutrition Viral Hepatitis Menu Menu Viral Hepatitis Viral Hepatitis Home For Veterans and the Public Veterans and the Public Home Hepatitis A Hepatitis B Hepatitis C Hepatitis C Home Getting ...

  7. Youth Education - Health / Nutrition

    OpenAIRE

    2004-01-01

    Deborah L. Angell: The Bug Stops Here! Cheryl L. Barber: Successful Snacks - Food, Fitness and Food Safety Learning Activities. Darcy Batura: At-Risk Youth and Household Hazardous Waste Education. Katherine L. Cason: Nutrition Mission – A Multimedia Educational Tool for Youth . Patsy A. Ezell: An Interactive Food and Nutrition Education Program for Youth. Rhea Lanting: Got Calcium? Sandy McCurdy: Reaching Teens through a Food Safety Education Partnership. Patricia Mulkeen: Choosing 4-H Fitnes...

  8. Nutrition for Sarcopenia

    OpenAIRE

    Yanai, Hidekatsu

    2015-01-01

    Aging-related sarcopenia means that muscle mass, strength, and physical performance tend to decline with age, and malnutrition is associated with sarcopenia. Therefore, nutritional interventions may make an important contribution to prevent the development of sarcopenia. Here I reviewed published articles about the effects of nutritional factors on sarcopenia in elderly people. A growing body of evidence suggests that metabolic factors associated with obesity and diabetes induce the progressi...

  9. Nutrition and fertility.

    Science.gov (United States)

    Pinelli, G; Tagliabue, A

    2007-12-01

    The first studies about fertility and nutrition date back to the 70ies and already showed a strict relation among female fertility, weight and body composition. However, the mechanisms of this connection started to be explained only after leptin's discovery. According to some authors' opinion, leptin could interact with reproductive axis at multiple sites with stimulatory effects at the hypothalamus and pituitary and stimulatory or inhibitory actions at the gonads. Leptin could play a role in other physiologic processes such as menstruation and pregnancy, and could initiate the complex process of puberty. It has been showed that conditions in which nutritional status is suboptimal, such as eating disorders, exercise induced amenhorrea, functional hypothalamic amenhorrea and polycystic ovarian syndrome, are associated with abnormal leptin levels. These conditions, are characterized by severe changes in body composition and dietary habits. Since leptin is regulated by body composition and dietary factors, (such as energy intake and macronutrient composition), a strict connection between nutritional intake and fertility regulated by leptin is confirmed. This review focuses on the current knowledge about nutritional factors that influence leptin levels. Since clinical and subclinical nutritional imbalance can determine the development and the maintenance of neuroendocrine and metabolic aberrations, studies on fertility need a deeper attention about dietary habits and nutritional status.

  10. IAEA Nobel Peace fund schools for nutrition. Combating child malnutrition

    International Nuclear Information System (INIS)

    2007-01-01

    fight against malnutrition by providing technical expertise in the use of stable isotope techniques in the development and evaluation of nutritional interventions. Stable isotope techniques have been used as research tools in nutrition for many years. However, the application of these techniques in nutrition programme development and evaluation is a relatively new approach, where the IAEA has a unique opportunity to contribute. Stable isotope techniques add value by increasing the sensitivity and specificity of measurements as compared to conventional techniques. The IAEA has supported numerous activities in infant nutrition where stable isotope techniques have been applied. These include projects to measure human milk intake in breast-fed infants, muscle mass in lactating mothers, and bioavailability of iron in infants and young children. IAEA Nobel Prize Fund Schools for Nutrition. The Norwegian Nobel Committee awarded the 2005 Nobel Peace Prize to the IAEA and Director General ElBaradei in equal shares. The IAEA's Board of Governors subsequently decided that the IAEA's share of the prestigious prize would be used to fund fellowships and training to improve cancer management and childhood nutrition in the developing world. In nutrition, the IAEA Nobel Cancer and Nutrition Fund is focused on capacity building in the use of nuclear techniques to develop and evaluate interventions to contribute to improved nutrition and health for children. Fund-supported fellowship awards are targeting young professionals, especially women, from developing countries, through the IAEA's Technical Cooperation (TC) Programme. Alongside such awards, regional events - IAEA Nobel Peace Prize Fund Schools for Nutrition - have been organized in Africa, Asia and the Pacific and in Latin America during 2006 and 2007. The aims of the IAEA Nobel Peace Prize Fund Schools in Nutrition are to: raise awareness of the IAEA's activities in human nutrition; and disseminate information about the usefulness

  11. An observational study of consumers' accessing of nutrition information in chain restaurants.

    Science.gov (United States)

    Roberto, Christina A; Agnew, Henry; Brownell, Kelly D

    2009-05-01

    In this observational study, we determined how frequently consumers accessed on-premises nutrition information provided at chain restaurants. The number of patrons entering and accessing nutrition information was recorded at 8 locations that were part of 4 major restaurant chains (McDonald's, Burger King, Starbucks, and Au Bon Pain). Only 6 (0.1%) of 4311 patrons accessed on-premises nutrition information before purchasing food. This very small percentage suggests that such information should be more prominently displayed, such as on restaurant menu boards, to help customers make informed decisions.

  12. An Observational Study of Consumers’ Accessing of Nutrition Information in Chain Restaurants

    Science.gov (United States)

    Agnew, Henry; Brownell, Kelly D.

    2009-01-01

    In this observational study, we determined how frequently consumers accessed on-premises nutrition information provided at chain restaurants. The number of patrons entering and accessing nutrition information was recorded at 8 locations that were part of 4 major restaurant chains (McDonald's, Burger King, Starbucks, and Au Bon Pain). Only 6 (0.1%) of 4311 patrons accessed on-premises nutrition information before purchasing food. This very small percentage suggests that such information should be more prominently displayed, such as on restaurant menu boards, to help customers make informed decisions. PMID:19299679

  13. School Assemblies: The Lost Art.

    Science.gov (United States)

    Beach, Daniel R.

    1979-01-01

    Guidelines and suggestions are offered for successful school assemblies. The school assembly should be a positive event; an occasion for developing unity, group loyalty, and desirable audience habits. (Author/MLF)

  14. Assembling large, complex environmental metagenomes

    Energy Technology Data Exchange (ETDEWEB)

    Howe, A. C. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Jansson, J. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Sciences Division; Malfatti, S. A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tringe, S. G. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tiedje, J. M. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Brown, C. T. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Computer Science and Engineering

    2012-12-28

    The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

  15. X-Ray Assembler Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — Federal regulations require that an assembler who installs one or more certified components of a diagnostic x-ray system submit a report of assembly. This database...

  16. Gender Quotas for Corporate Boards

    OpenAIRE

    Elomäki, Anna

    2017-01-01

    Gender quotas for corporate boards can be seen as a way of drawing attention to gendered power within the economy as well as a way to democratize the economy, yet the debate about them has focused on the economic and business benefits of gender equality rather than on gender justice or democracy. This article examines how women’s under-representation in economic decision-making was constituted as an economic problem in the European Union’s gender-equality policies and how the economization of...

  17. The fourth Board of Governors

    International Nuclear Information System (INIS)

    1961-01-01

    The General Conference of the International Atomic Energy Agency at its fourth regular session, which was held in Vienna from 20 September to 1 October 1960, elected five Member States to serve a two-year term on the Agency's Board of Governors. The five were Argentina, El Salvador, the Federal Republic of Germany, Iraq and Thailand. The new members succeed Indonesia, the Netherlands, Peru, the United Arab Republic and Venezuela, which were elected for a two-year term by the second session of the General Conference in 1958

  18. Preserving the Legitimacy of Board Certification.

    Science.gov (United States)

    Hanemann, Michael S; Wall, Holly C; Dean, John A

    2017-06-01

    The aims of this discussion were to inform the medical community about the American Board of Cosmetic Surgery's ongoing attempts in Louisiana to achieve equivalency to American Board of Medical Specialties (ABMS) member boards so that its diplomates may use the term "board certified" in advertising and to ensure public safety by upholding the standards for medical board certification. In 2011, Louisiana passed a truth in medical advertising law, which was intended to protect the public by prohibiting the use of the term "board certified" by improperly credentialed physicians. An American Board of Cosmetic Surgery diplomate petitioned the Louisiana State Board of Medical Examiners to approve a rule that would establish a pathway to equivalency for non-ABMS member boards, whose diplomates have not completed training approved by the Accreditation Council for Graduate Medical Education (ACGME) in the specialty they are certifying. Physicians and physician organizations representing multiple specialties (facial plastic and reconstructive surgery, otolaryngology [head and neck surgery], orthopedic spine surgery, pediatric neurosurgery, dermatology, and plastic surgery) urged the Louisiana State Board of Medical Examiners to clarify its advertising policy, limiting the use of the term "board certified" to physicians who have completed ACGME-approved training in the specialty or subspecialty named in the certificate. The public equates the term "board certified" with the highest level of expertise in a medical specialty. When a certifying board does not require completion of ACGME or American Osteopathic Association (AOA)-accredited training in the specialty it certifies, the result is an unacceptable degree of variability in the education and training standards applied to its diplomates. Independent, third-party oversight of certifying boards and training programs is necessary to ensure quality standards are upheld. Any system that assesses a non-ABMS member or non

  19. Quantitative and Qualitative Analysis of Nutrition and Food Safety Information in School Science Textbooks of India

    Science.gov (United States)

    Subba Rao, G. M.; Vijayapushapm, T.; Venkaiah, K.; Pavarala, V.

    2012-01-01

    Objective: To assess quantity and quality of nutrition and food safety information in science textbooks prescribed by the Central Board of Secondary Education (CBSE), India for grades I through X. Design: Content analysis. Methods: A coding scheme was developed for quantitative and qualitative analyses. Two investigators independently coded the…

  20. Strategies for nutritional improvement.

    Science.gov (United States)

    Gill, K S

    1991-01-01

    India has achieved self-sufficiency in the production of food grains, yet the production of milk, legumes, vegetables, oils and fats, eggs, and meat is far short of the needs of the population. The Indian diet predominantly comprises cereals, and the diets of expectant and nursing mothers as well as children are grossly deficient in protective foods. Serious nutritional inadequacies have resulted in low birth weight, retarded growth, and nutritional deficiencies (protein energy malnutrition in preschool children, vitamin A deficiency, iron deficiency in women of reproductive age, and iodine deficiency disorders among neonates and schoolchildren). General malnutrition is prevalent in 25% of the rural and 20% of the urban population. Deficiency symptoms of vitamin B complex and vitamin C are also not uncommon. 37% of the population of India lives below the poverty limit, the literacy rate is only 52.1% (39.4% for women), safe drinking water is scarce, nutritional ignorance is rampant, there is a lack of personal hygiene, and poor sanitation all account for malnutrition. A number of government and nongovernmental organizations' programs have attempted to raise the level of nutrition and the standard of living of the people. Some of them include the integrated child development services, special nutritional program, national vitamin A deficiency prophylaxis program, national anemia prophylaxis program, national goiter control program, midday meal program, special class feeding programs, universal immunization program, nutritional and health education through the mass media as well as the observance of world food day and world health day. The national health policy gives high priority to the promotion of family planning, the provision of primary health care, and the acceleration of welfare programs for women and children. As a result of policies and programs of health and nutrition, the infant, child, and maternal mortality rates have declined and life expectancy at

  1. Welding facilities for NPP assembling

    International Nuclear Information System (INIS)

    Rojtenberg, S.S.

    1987-01-01

    Recommendations concerning the choice of equipment for welding in pre-assembling work shops, in the enlarging assembling shops and at the assembling site, are given. Advanced production automatic welders and semiautomatic machines, applied during the NPP equipment assembling as well as automatic machines specially produced for welding the main reactor components and pipelines are described. Automatic and semiautomatic machine and manual welding post supply sources are considered

  2. Reflector-moderated critical assemblies

    International Nuclear Information System (INIS)

    Paxton, H.C.; Jarvis, G.A.; Byers, C.C.

    1975-07-01

    Experiments with reflector-moderated critical assemblies were part of the Rover Program at the Los Alamos Scientific Laboratory (LASL). These assemblies were characterized by thick D 2 O or beryllium reflectors surrounding large cavities that contained highly enriched uranium at low average densities. Because interest in this type of system has been revived by LASL Plasma Cavity Assembly studies, more detailed descriptions of the early assemblies than had been available in the unclassified literature are provided. (U.S.)

  3. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Takeda, Tadashi; Sato, Kenji; Goto, Masakazu.

    1984-01-01

    Purpose: To facilitate identification of a fuel assembly upon fuel exchange in BWR type reactors. Constitution: Fluorescent material is coated or metal plating is applied to the impressed portion of a upper tie plate handle of a fuel assembly, and the fluorescent material or the metal plating surface is covered with a protective membrane made of transparent material. This enables to distinguish the impressed surface from a distant place and chemical reaction between the impressed surface and the reactor water can be prevented. Furthermore, since the protective membrane is formed such that it protrudes toward the upper side relative to the impressed surface, there is no risk of depositions of claddings thereover. (Moriyama, K.)

  4. Fuel nozzle assembly

    Science.gov (United States)

    Johnson, Thomas Edward [Greer, SC; Ziminsky, Willy Steve [Simpsonville, SC; Lacey, Benjamin Paul [Greer, SC; York, William David [Greer, SC; Stevenson, Christian Xavier [Inman, SC

    2011-08-30

    A fuel nozzle assembly is provided. The assembly includes an outer nozzle body having a first end and a second end and at least one inner nozzle tube having a first end and a second end. One of the nozzle body or nozzle tube includes a fuel plenum and a fuel passage extending therefrom, while the other of the nozzle body or nozzle tube includes a fuel injection hole slidably aligned with the fuel passage to form a fuel flow path therebetween at an interface between the body and the tube. The nozzle body and the nozzle tube are fixed against relative movement at the first ends of the nozzle body and nozzle tube, enabling the fuel flow path to close at the interface due to thermal growth after a flame enters the nozzle tube.

  5. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ito, Arata; Wakamatsu, Mitsuo.

    1976-01-01

    Object: To permit the coolant in an FBR type reactor to enter from the entrance nozzle into a nuclear fuel assembly without causing cavitation. Structure: In a nuclear fuel assembly, which comprises a number of thin fuel pines bundled together at a uniform spacing and enclosed within an outer cylinder, with a handling head connected to an upper portion of the outer cylinder and an entrance nozzle connected to a lower portion of the cylinder, the inner surface of the entrance nozzle is provided with a buffer member and an orifice successively in the direction of flow of the coolant. The coolant entering from a low pressure coolant chamber into the entrance nozzle strikes the buffer member and is attenuated, and thereafter flows through an orifice into the outer cylinder. (Horiuchi, T.)

  6. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  7. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Butterfield, R.S.; Garner, D.L.M.

    1977-01-01

    Reference is made to nuclear fuel assemblies designed for cooling on the 'tube-in-shell' principle in which the fuel is contained by a shell and is cooled by coolant passed through tubes extending through the shell. It has been proposed to employ coated particle fuel as a porous bed on the tube side and the bleed coolant from the tubes into direct contact with the fuel particles. In this way heat is extracted both by direct contact with the fuel and by heat transfer through the coolant tube walls. The system described aims to provide an improved structure of tube and shell for a fuel assembly of this kind and is particularly suitable for use in a gas cooled fast reactor, being able to withstand the neutron flux and high temperature conditions in these reactors. Constructional details are given. (U.K.)

  8. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    1975-01-01

    A description is given of a nuclear reactor fuel assembly comprising a cluster of fuel elements supported by transversal grids so that their axes are parallel to and at a distance from each other, in order to establish interstices for the axial flow of a coolant. At least one of the interstices is occupied by an axial duct reserved for an auxiliary cooling fluid and is fitted with side holes through which the auxiliary cooling fluid is sprayed into the cluster. Deflectors extend as from a transversal grid in a position opposite the holes to deflect the cooling fluid jet towards those parts of the fuel elements that are not accessible to the auxiliary coolant. This assembly is intended for reactors cooled by light or heavy water [fr

  9. Gamma counter shutter assembly

    International Nuclear Information System (INIS)

    Aday, R.W. Jr.; Barber, D.G.

    1976-01-01

    A shutter assembly for a radioactivity measuring apparatus is described having a sample counting chamber, the assembly having a bulky solid lead cylinder with a sample access port extending therethrough for alignment with the sample chamber. The cylinder is rotated by a Geneva wheel arrangement having a drive wheel with a plurality of equi-angularly disposed pins perpendicular to the surface thereof engaging radially extending open-ended slots in a driven wheel secured to the lead cylinder for concurrent rotation therewith. The drive wheel is rotated at a constant speed with the driven wheel accelerating as a pin traverses the slot from the open end toward the driven wheel center and then decelerating as the pin traverses the reverse direction to provide precise positioning with adjacent pins engaging the open ends of adjacent slots in the stop position of the cylinder. 8 Claims, 3 Drawing Figures

  10. Mechanical seal assembly

    Science.gov (United States)

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  11. Mechanical Seal Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kotlyar, Oleg M.

    1999-06-18

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  12. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Natori, Hisahide; Kurihara, Kunitoshi.

    1982-01-01

    Purpose: To increase the fuel safety by decreasing the gap conductance between fuels and cladding tubes, as well as improve the reactor core controllability by rendering the void coefficient negative. Constitution: Fuel assemblies in a pressure tube comprise a tie-rod, fuel rods in a central region, and fuel rods with burnable poison in the outer circumference region. Here, B 4 C is used as the burnable poison by 1.17 % by weight ratio. The degrees of enrichment for the fissile plutonium as PuO 2 -UO 2 fuel used in the assemblies are 2.7 %, 2.7 % and 1.5 % respectively in the innermost layer, the intermediate layer and the outermost layer. This increases the burn-up degree to improve the plant utilizability, whereby the void coefficient is rendered negative to improve the reactor core controllability. (Horiuchi, T.)

  13. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Tomihiro.

    1970-01-01

    The present invention relates to fuel assemblies employing wire wrap spacers for retaining uniform spatial distribution between fuel elements. Clad fuel elements are helically wound in the oxial direction with a wave-formed wire strand. The strand is therefore provided with spring action which permits the fuel elements to expand freely in the axial and radial directions so as to retain proper spacing and reduce stresses due to thermal deformation. (Ownes, K.J.)

  14. Assembling Toyota in Portugal

    OpenAIRE

    Machado, Tiago; Moniz, António

    2003-01-01

    A lot has been written over the last decade with regard to Toyota and the productive model associated to it (toyota-ism). And more specifically concerning the "(…) best-seller that changed the... sociological world" (Castillo, 1998: 31). But the case of Salvador Caetano’s Ovar Industrial Division (OID), that assembles Toyota light commercial vehicles in Portugal, allows us to put forward a sub-hypothesis that fits into the analysis schema proposed in the First GERPISA International Program – ...

  15. Fuel assembly manufacturing device

    International Nuclear Information System (INIS)

    Picard, P.; Villaeys, R.

    1995-01-01

    The device comprises a central support on which the frame is mounted, a magazine which supports the fuel rods in passages aligned with those in the frame and a traction assembly on the opposite side of the magazine and including an array of pull rods designed to be advanced through the passages in the frame, to grip respective fuel rods in magazine and to pull those rods into the passages on the return stroke. 13 figs

  16. Composite airfoil assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2015-03-03

    A composite blade assembly for mounting on a turbine wheel includes a ceramic airfoil and an airfoil platform. The ceramic airfoil is formed with an airfoil portion, a blade shank portion and a blade dovetail tang. The metal platform includes a platform shank and a radially inner platform dovetail. The ceramic airfoil is captured within the metal platform, such that in use, the ceramic airfoil is held within the turbine wheel independent of the metal platform.

  17. The Sentinel-4 UVN focal plane assemblies

    Science.gov (United States)

    Hinger, Jürgen; Hohn, Rüdiger; Gebhardt, Eyk; Reichardt, Jörg

    2017-09-01

    The Sentinel-4 UVN Instrument is a dispersive imaging spectrometer covering the UV-VIS and the NIR wavelength. It is developed and built under an ESA contract by an industrial consortium led by Airbus Defence and Space. It will be accommodated on board of the MTG-S (Meteosat Third Generation - Sounder) satellite that will be placed in a geostationary orbit over Europe sampling data for generating two-dimensional maps of a number of atmospheric trace gases. The incoming light is dispersed by reflective gratings and detected by the two (UVVIS and NIR) CCDs mounted inside the focal plane assemblies. Both CCD detectors acquire spectral channels and spatial sampling in two orthogonal directions and will be operated at about 215 K mainly to minimize random telegraph signal effects and to reduce dark current. Stringent detector temperature as well as alignment stability requirements of less than +/-0.1 K per day respectively of less than 2 micrometers/2 arcseconds from ground to orbit are driving the FPA thermo-mechanical design. A specific FPA design feature is the redundant LED-calibration system for bad pixel detection as well as pixel gain and linearity monitoring. This paper reports on the design and qualification of the Focal Plane Assemblies with emphasis on thermo-mechanical as well as alignment stability verification.

  18. Fourth Doctoral Student Assembly

    CERN Multimedia

    Ingrid Haug

    2016-01-01

    On 10 May, over 130 PhD students and their supervisors, from both CERN and partner universities, gathered for the 4th Doctoral Student Assembly in the Council Chamber.   The assembly was followed by a poster session, at which eighteen doctoral students presented the outcome of their scientific work. The CERN Doctoral Student Programme currently hosts just over 200 students in applied physics, engineering, computing and science communication/education. The programme has been in place since 1985. It enables students to do their research at CERN for a maximum of three years and to work on a PhD thesis, which they defend at their University. The programme is steered by the TSC committee, which holds two selection committees per year, in June and December. The Doctoral Student Assembly was opened by the Director-General, Fabiola Gianotti, who stressed the importance of the programme in the scientific environment at CERN, emphasising that there is no more rewarding activity than lear...

  19. Metrology for ITER Assembly

    International Nuclear Information System (INIS)

    Bogusch, E.

    2006-01-01

    The overall dimensions of the ITER Tokamak and the particular assembly sequence preclude the use of conventional optical metrology, mechanical jigs and traditional dimensional control equipment, as used for the assembly of smaller, previous generation, fusion devices. This paper describes the state of the art of the capabilities of available metrology systems, with reference to the previous experience in Fusion engineering and in other industries. Two complementary procedures of transferring datum from the primary datum network on the bioshield to the secondary datum s inside the VV with the desired accuracy of about 0.1 mm is described, one method using the access directly through the ports and the other using transfer techniques, developed during the co-operation with ITER/EFDA. Another important task described is the development of a method for the rapid and easy measurement of the gaps between sectors, required for the production of the customised splice plates between them. The scope of the paper includes the evaluation of the composition and cost of the systems and team of technical staff required to meet the requirements of the assembly procedure. The results from a practical, full-scale demonstration of the methodologies used, using the proposed equipment, is described. This work has demonstrated the feasibility of achieving the necessary accuracies for the successful building of ITER. (author)

  20. SCT Barrel Assembly Complete

    CERN Multimedia

    L. Batchelor

    As reported in the April 2005 issue of the ATLAS eNews, the first of the four Semiconductor Tracker (SCT) barrels, complete with modules and services, arrived safely at CERN in January of 2005. In the months since January, the other three completed barrels arrived as well, and integration of the four barrels into the entire barrel assembly commenced at CERN, in the SR1 building on the ATLAS experimental site, in July. Assembly was completed on schedule in September, with the addition of the innermost layer to the 4-barrel assembly. Work is now underway to seal the barrel thermal enclosure. This is necessary in order to enclose the silicon tracker in a nitrogen atmosphere and provide it with faraday-cage protection, and is a delicate and complicated task: 352 silicon module powertapes, 352 readout-fibre bundles, and over 400 Detector Control System sensors must be carefully sealed into the thermal enclosure bulkhead. The team is currently verifying the integrity of the low mass cooling system, which must be d...

  1. The Editorial Board is Changing

    Directory of Open Access Journals (Sweden)

    LE Nicolle

    2005-01-01

    Full Text Available The success of The Canadian Journal of Infectious Diseases & Medical Microbiology over the past 16 years is largely attributable to the continuing and substantial support from a dedicated and enthusiastic Editorial Board. The individuals who have participated are listed on the masthead in each issue of the Journal. Many of the current Editorial Board members have participated continually since the initiation of the Journal - a commitment of over 16 years. They have provided oversight as the Journal has evolved, and their critical insights in the discussion of issues as they have developed, as well as their suggestions for new directions, have significantly contributed to the maintenance of Journal quality. Our associate editors have been particularly active. They have coordinated and, frequently, developed much of the content for the special sections - adult and paediatric infectious disease notes, clinical vignettes and reviews. They have also facilitated the peer review of submitted manuscripts by identifying reviewers and making recommendations for revisions and publication. These contributions have been essential to the continuing operation and high, scientific quality of the Journal.

  2. Combined enteral and parenteral nutrition.

    Science.gov (United States)

    Wernerman, Jan

    2012-03-01

    To review and discuss the evidence and arguments to combine enteral nutrition and parenteral nutrition in the ICU, in particular with reference to the Early Parenteral Nutrition Completing Enteral Nutrition in Adult Critically Ill Patients (EPaNIC) study. The EPaNIC study shows an advantage in terms of discharges alive from the ICU when parenteral nutrition is delayed to day 8 as compared with combining enteral nutrition and parenteral nutrition from day 3 of ICU stay. The difference between the guidelines from the European Society of Enteral and Parenteral Nutrition in Europe and American Society for Parenteral and Enteral Nutrition/Society of Critical Care Medicine in North America concerning the combination of enteral nutrition and parenteral nutrition during the initial week of ICU stay was reviewed. The EPaNIC study clearly demonstrates that early parenteral nutrition in the ICU is not in the best interests of most patients. Exactly at what time point the combination of enteral nutrition and parenteral nutrition should be considered is still an open question.

  3. Nutrition and pubertal development

    Directory of Open Access Journals (Sweden)

    Ashraf Soliman

    2014-01-01

    Full Text Available Nutrition is one of the most important factors affecting pubertal development. Puberty entails a progressive nonlinear process starting from prepubescent to full sexual maturity through the interaction and cooperation of biological, physical, and psychological changes. Consuming an adequate and balanced healthy diet during all phases of growth (infancy, childhood and puberty appears necessary both for proper growth and normal pubertal development. Girls begin puberty at an earlier age compared to past decades. Excessive eating of many processed, high-fat foods, may be the cause of this phenomenon. Overweight or obese children are more likely to enter puberty early. Some evidence suggests that obesity can accelerate the onset of puberty in girls and may delay the onset of puberty in boys. Moreover, the progression of puberty is affected by nutrition. On the other hand, puberty triggers a growth spurt, which increases nutritional needs including macro and micronutrients. Increased caloric, protein, iron, calcium, zinc and folate needs have to be provided during this critical period of rapid growth. Severe primary or secondary malnutrition also can delay the onset and progression of puberty. The higher incidence of anorexia nervosa and bulimia in adolescents imposes a nutritional risk on pubertal development. Moreover, many environmental endocrine disruptors (EDs have been identified that can significantly impair the normal course of puberty. This mini-review sums up some important findings in this important complex that link nutrition and pubertal development.

  4. Nutritional Considerations for Bouldering.

    Science.gov (United States)

    Smith, Edward J; Storey, Ryan; Ranchordas, Mayur K

    2017-08-01

    Bouldering competitions are held up to International level and governed by the International Federation of Sport Climbing. Bouldering has been selected to feature at the 2020 Olympic Games in Tokyo, however, physiological qualities and nutritional requirements to optimize performance remain inadequately defined due to large gaps in the literature. The primary goals of training include optimizing the capacity of the anaerobic energy systems and developing sport-specific strength, with emphasis on the isometric function of the forearm flexors responsible for grip. Bouldering athletes typically possess a lean physique, similar to the characteristics of sport climbers with reported body fat values of 6-12%. Athletes strive for a low body weight to improve power to weight ratio and limit the load on the extremities. Specialized nutritional support is uncommon and poor nutritional practices such as chronic carbohydrate restriction are prevalent, compromising the health of the athletes. The high intensity nature of bouldering demands a focus on adequate carbohydrate availability. Protein intake and timing should be structured to maximize muscle protein synthesis and recovery, with the literature suggesting 0.25-0.3 g/kg in 3-4 hr intervals. Supplementing with creatine and b-alanine may provide some benefit by augmenting the capacity of the anaerobic systems. Boulderers are encouraged to seek advice from nutrition experts to enhance performance, particularly important when weight loss is the desired outcome. Further research is warranted across all nutritional aspects of bouldering which is summarized in this review.

  5. Optimal back-to-front airplane boarding

    Science.gov (United States)

    Bachmat, Eitan; Khachaturov, Vassilii; Kuperman, Ran

    2013-06-01

    The problem of finding an optimal back-to-front airplane boarding policy is explored, using a mathematical model that is related to the 1+1 polynuclear growth model with concave boundary conditions and to causal sets in gravity. We study all airplane configurations and boarding group sizes. Optimal boarding policies for various airplane configurations are presented. Detailed calculations are provided along with simulations that support the main conclusions of the theory. We show that the effectiveness of back-to-front policies undergoes a phase transition when passing from lightly congested airplanes to heavily congested airplanes. The phase transition also affects the nature of the optimal or near-optimal policies. Under what we consider to be realistic conditions, optimal back-to-front policies lead to a modest 8-12% improvement in boarding time over random (no policy) boarding, using two boarding groups. Having more than two groups is not effective.

  6. Optimal back-to-front airplane boarding.

    Science.gov (United States)

    Bachmat, Eitan; Khachaturov, Vassilii; Kuperman, Ran

    2013-06-01

    The problem of finding an optimal back-to-front airplane boarding policy is explored, using a mathematical model that is related to the 1+1 polynuclear growth model with concave boundary conditions and to causal sets in gravity. We study all airplane configurations and boarding group sizes. Optimal boarding policies for various airplane configurations are presented. Detailed calculations are provided along with simulations that support the main conclusions of the theory. We show that the effectiveness of back-to-front policies undergoes a phase transition when passing from lightly congested airplanes to heavily congested airplanes. The phase transition also affects the nature of the optimal or near-optimal policies. Under what we consider to be realistic conditions, optimal back-to-front policies lead to a modest 8-12% improvement in boarding time over random (no policy) boarding, using two boarding groups. Having more than two groups is not effective.

  7. Interfacial stresses in a bi-material assembly with a compliant bonding layer

    International Nuclear Information System (INIS)

    Suhir, E; Vujosevic, M

    2008-01-01

    We examine an elongated bi-material adhesively bonded or soldered assembly with a continuous compliant attachment (bonding layer). The assembly is subjected to external tensile forces or to bending moments applied to one of the assembly components. We develop simple predictive analytical ('mathematical') models for the evaluation of interfacial shearing (in the case of external tensile forces) and peeling (in the case of external bending moments) stresses and strains in the bonding material. The developed models can be helpful in stress-strain analyses of assemblies of the type in question and particularly for printed-circuit-board (PCB)/surface-mounted-device (SMD) assemblies employed in electronic packaging. These models enable one to particularly evaluate the maximum interfacial stresses in the bonding material from the predicted or measured strains in the PCB in the vicinity of but still outside the surface-mounted package

  8. New Rationales for Women on Boards

    OpenAIRE

    Choudhury, B.

    2014-01-01

    Should measures promoting women to corporate boards be solely justified in terms of economic arguments? Traditionally, such measures have tended to rely on utilitarian arguments, despite the fact that the most prominent of these arguments—the relationship between women’s presence on boards and firm financial performance—is equivocal. Conversely, this article argues that rationales for increasing women on boards should be based on both equality and economics grounds. An equality rationale is n...

  9. Board Directors and Corporate Social Responsibility

    Directory of Open Access Journals (Sweden)

    Mariana Nedelcu (Bunea

    2014-08-01

    Full Text Available The boards of directors and corporate social responsibility (CSR have been the subject of much study and debate in the corporate governance circles over the two last decades. With issues ranging from poor corporate reporting to excessive executive compensation often splashed in the headlines, the role of boards comes into the media limelight as never before. Boards of directors are also becoming increasingly aware of corporate social responsibility issues.

  10. Board Directors and Corporate Social Responsibility

    OpenAIRE

    Mariana Nedelcu (Bunea)

    2014-01-01

    The boards of directors and corporate social responsibility (CSR) have been the subject of much study and debate in the corporate governance circles over the two last decades. With issues ranging from poor corporate reporting to excessive executive compensation often splashed in the headlines, the role of boards comes into the media limelight as never before. Boards of directors are also becoming increasingly aware of corporate social responsibility issues.

  11. Diversity of what? Multifaceted Boards and Directors

    OpenAIRE

    A. Hillman; S. Nielsen; A. Zattoni

    2012-01-01

    Board diversity has long intrigued practitioners and scholars. Constituents encourage companies to vary of director characteristics, but companies often resist. Academics debate whether diversity is beneficial for board decision-making and the empirical evidence is mixed, partly because “diversity” is treated as a singular construct despite representing many different forms (e.g. demographic, human capital and social capital). We propose a theoretical model of board diversit...

  12. [Nutritional management in geriatric traumatology].

    Science.gov (United States)

    Singler, K; Goisser, S; Volkert, D

    2016-08-01

    The prevalence of malnutrition or the risk of malnourishment is high among orthogeriatric patients and a poor nutritional status is associated with a negative outcome. A comprehensive management of preoperative and postoperative nutritional and fluid intake in these patients can help to improve the situation. The management includes identification of patients affected, a thorough assessment of the nutritional status, work-up of possible underlying causes, documentation of nutritional and fluid intake and, most importantly, procedures to improve the preoperative and postoperative nutritional situation. This article gives an overview of the recently updated recommendations on nutritional management in orthogeriatric patients as published by the orthogeriatric working group of the German Geriatric Society.

  13. What is Nutrition & Metabolism?

    Directory of Open Access Journals (Sweden)

    Feinman Richard D

    2004-08-01

    Full Text Available Abstract A new Open Access journal, Nutrition & Metabolism (N&M will publish articles that integrate nutrition with biochemistry and molecular biology. The open access process is chosen to provide rapid and accessible dissemination of new results and perspectives in a field that is of great current interest. Manuscripts in all areas of nutritional biochemistry will be considered but three areas of particular interest are lipoprotein metabolism, amino acids as metabolic signals, and the effect of macronutrient composition of diet on health. The need for the journal is identified in the epidemic of obesity, diabetes, dyslipidemias and related diseases, and a sudden increase in popular diets, as well as renewed interest in intermediary metabolism.

  14. Nutritional rickets in Denmark

    DEFF Research Database (Denmark)

    Beck-Nielsen, Signe; Jensen, Tina Kold; Gram, Jeppe

    2009-01-01

    INTRODUCTION: This study describes clinical and biochemical characteristics of nutritional rickets and risk factors at diagnosis among children living in Denmark. All medical records from patients with rickets referred to or discharged from hospitals in Southern Denmark from 1985 to 2005 were...... identified by register search. MATERIALS AND METHODS: Patients included were younger than 15 years of age and fulfilled the diagnostic criteria of primary, nutritional rickets. A total of 112 patients with nutritional rickets were included: 29 were of ethnic Danish origin, and 83 were immigrants. RESULTS......: Patients diagnosed before the age of 4 (median 1.4) years displayed the classic clinical signs of rickets, whereas patients diagnosed after the age of 4 (median 12.5) years had few clinical signs and unspecific symptoms. Ethnic Danish patients were only diagnosed before age 24 months, and they accounted...

  15. Nutrition and the eye.

    Science.gov (United States)

    Congdon, N G; West, K P

    1999-12-01

    The topic "nutrition and the eye" cannot adequately be covered in a single review article; indeed, dozens of books and hundreds of articles have been written on the subject. This review concentrates on three areas in which specific nutrients are known or theorized to have a major impact on vision and the visual system: vitamin A deficiency; antioxidants and their proposed role in the prevention of age-related cataract and macular degeneration; and nutritional optic neuropathies, including those of the recent Cuban epidemic. In addition, this article touches on nutritional treatments that have been suggested for several less common eye diseases and, finally, considers several less prevalent conditions in which deficiency of or excess exposure to a particular nutrient has been associated with ocular pathology.

  16. Nutrition and skin.

    Science.gov (United States)

    Pappas, Apostolos; Liakou, Aikaterini; Zouboulis, Christos C

    2016-09-01

    Nutrition has long been associated with skin health, including all of its possible aspects from beauty to its integrity and even the aging process. Multiple pathways within skin biology are associated with the onset and clinical course of various common skin diseases, such as acne, atopic dermatitis, aging, or even photoprotection. These conditions have been shown to be critically affected by nutritional patterns and dietary interventions where well-documented studies have demonstrated beneficial effects of essential nutrients on impaired skin structural and functional integrity and have restored skin appearance and health. Although the subject could be vast, the intention of this review is to provide the most relevant and the most well-documented information on the role of nutrition in common skin conditions and its impact on skin biology.

  17. Nutrition in sports

    Directory of Open Access Journals (Sweden)

    2013-06-01

    Full Text Available Nutrition is one of the fundamental factors that influence the effectiveness of physical activity, increase efficiency and replenishment of muscle mass, balances the ratio of energy consumed and restored. The diet of an athlete can and should be built on common foods available and prepared in accordance with generally accepted principles of healthy eating. The need for major macronutrients and micronutrients is determined by the need for energy, the intensity of sweating and the goals for building muscle mass. Depending on the intensity of the proposed load including competition, there are individual nutritional needs and, if necessary, various food supplements may be used. The basic principles of sport nutrition are described in this article

  18. Does firm performance affect board independence?

    Directory of Open Access Journals (Sweden)

    Yi Wang

    2010-07-01

    Full Text Available This paper seeks to shed some light on the antecedents of board independence. Specifically, it attempts to test the conceptual frameworks which make different predictions about the effect of firm performance on the level of board independence. The results provide support for the perspective that appointing more independent members to the boards may merely represent firms’ attempts to comply with institutional pressures. It is found that higher blockholder shareholdings lead to lower independence on the board, and audit and remuneration committees. Moreover, larger firms have relatively more independent directors sitting on nomination and remuneration committees.

  19. The Ontario Energy Board's proposed new mandate

    International Nuclear Information System (INIS)

    Laughren, F.

    1998-01-01

    The Ontario Energy Board's proposed new mandate was reviewed. The role of the Board will be to regulate the monopoly delivery components of the electricity and natural gas industry and to smooth the transition to competition. The Board will monitor market performance and will encourage electricity and natural gas monopoly services to be compatible where possible. The Board will also assist local restructuring efforts when called upon do so and ensure that the marketplace operates efficiently and effectively. Gas marketers' licensing is scheduled to begin in early 1999. Licenses will also apply to the electric industry. The objectives of the proposed licensing, the regulatory requirements and the proposed regulatory approach are described

  20. 76 FR 67402 - Performance Review Board Appointments

    Science.gov (United States)

    2011-11-01

    ... Executive Service (SES), Senior Level (SL), and Scientific or Professional (ST) Performance Review Boards...; White, Dave. Research, Education and Economics (REE) Bartuska, Ann; Jacobs-Young, Chavonda; Woteki...

  1. Corporate Social Responsibility in the Board Room

    DEFF Research Database (Denmark)

    Knudsen, Jette Steen; Geisler, Kathrine; Ege, Mette

    2013-01-01

    When do board directors pay attention to corporate social responsibility (CSR) issues? Board directors have traditionally focused on maximizing shareholder profit and viewed corporate governance narrowly as a way to meet this goal. They have paid little or no attention to CSR issues because...... they see CSR as a contrast to profit maximization. We argue in this article that companies can no longer ignore CSR. We propose that three conditions must be met in order for boards to pay attention toCSR. First, the board must have a mindset that considers CSR as contributing value to the firm. Second...

  2. Social Responsibility in the Board Room

    DEFF Research Database (Denmark)

    Ege, Mette; Geisler, Kathrine; Knudsen, Jette Steen

    When do board directors pay attention to corporate social responsibility (CSR) issues? Board directors have traditionally focused on maximizing shareholder profit and viewed corporate governance narrowly as a way to meet this goal. They have paid little or no attention to CSR issues because...... they see CSR as a contrast to profit maximization. We argue in this article that companies can no longer ignore CSR. We propose that three conditions must be met in order for boards to pay attention to CSR. First, the board must have a mind-set that considers CSR as contributing value to the firm. Second...

  3. Process development for automated solar-cell and module production. Task 4. Automated array assembly. Quarterly report No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Hagerty, J. J.; Gifford, M.

    1981-04-15

    The Automated Lamination Station is mechanically complete and is currently undergoing final wiring. The high current driver and isolator boards have been completed and installed, and the main interface board is under construction. The automated vacuum chamber has had a minor redesign to increase stiffness and improve the cover open/close mechanism. Design of the Final Assembly Station has been completed and construction is underway.

  4. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1969-70. Explanatory Note

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1970-11-13

    By Resolution GC(XIV)/RES/268 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1969-70 which, together with that report, constitutes the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1970.

  5. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1968-69. Explanatory Note

    International Nuclear Information System (INIS)

    1969-01-01

    By Resolution GC(XIII)/RES/251 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1968-69 which, together with that report, shall constitute the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1969.

  6. The Agency's Annual Report to the General Assembly of the United Nations for the Year 1969-70. Explanatory Note

    International Nuclear Information System (INIS)

    1970-01-01

    By Resolution GC(XIV)/RES/268 the General Conference requested the Board of Governors to arrange for the preparation of a supplement to the Board's annual report to the General Conference for 1969-70 which, together with that report, constitutes the Agency's report to the General Assembly of the United Nations for that year. The present document contains the supplement, which deals briefly with some developments in the Agency's work during the period 1 July to 1 October 1970.

  7. Nutrition in Diabetes.

    Science.gov (United States)

    Hamdy, Osama; Barakatun-Nisak, Mohd-Yusof

    2016-12-01

    Medical nutrition therapy (MNT) is a key component of diabetes management. The importance of balancing macronutrients, reducing carbohydrate load, lowering glycemic index, and implementing an overall healthy dietary pattern are emerging as better approaches for MNT in diabetes. Recent research points to improved glycemic control, reduction in body weight, and improvement in many cardiovascular risk factors when these approaches are provided by registered dietitians or health care providers. This review article discusses the current evidence about the role of sensible nutrition in diabetes management. Specific eating plans for weight reduction and for patients with type 1 diabetes are also discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Nutrition and HIV

    DEFF Research Database (Denmark)

    Friis, Henrik; Olsen, Mette Frahm; Filteau, Suzanne

    2017-01-01

    , which is mainly synergistic and operating at different levels. HIV infection increases energy and nutrient requirements, yet it reduces food security. The result is nutritional deficiencies, which increase progression of HIV infection. Both undernutrition and food insecurity may also lead to increased...... risk of transmission. Nutritional intake and status may affect metabolism of antiretroviral drugs, some of which may affect body composition, and increase risk of the metabolic syndrome. In addition, HIV is transmitted through breastfeeding, causing a serious infant feeding dilemma for which...

  9. Clinical avian nutrition.

    Science.gov (United States)

    Orosz, Susan E

    2014-09-01

    Psittacine birds eat plant-based foods. Birds in the wild seem to be able to balance their energy needs, amino acids, and calcium. Companion birds in captivity do not do as well when self-selecting, and balanced diets are needed to improve their general health. A nutritional history is important to determine whether the avian patient is in balance nutritionally. Understanding the various sources of the fat-soluble vitamins, calcium, and protein will help guide clients to provide nutritious foods for their birds. Owners need to learn to use foraging as a major source of their bird's diet and techniques. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Packaging printed circuit boards: A production application of interactive graphics

    Science.gov (United States)

    Perrill, W. A.

    1975-01-01

    The structure and use of an Interactive Graphics Packaging Program (IGPP), conceived to apply computer graphics to the design of packaging electronic circuits onto printed circuit boards (PCB), were described. The intent was to combine the data storage and manipulative power of the computer with the imaginative, intuitive power of a human designer. The hardware includes a CDC 6400 computer and two CDC 777 terminals with CRT screens, light pens, and keyboards. The program is written in FORTRAN 4 extended with the exception of a few functions coded in COMPASS (assembly language). The IGPP performs four major functions for the designer: (1) data input and display, (2) component placement (automatic or manual), (3) conductor path routing (automatic or manual), and (4) data output. The most complex PCB packaged to date measured 16.5 cm by 19 cm and contained 380 components, two layers of ground planes and four layers of conductors mixed with ground planes.

  11. NPS Transit System Passenger Boardings Study: Converting Ticket Sales to Passenger Boardings.

    Science.gov (United States)

    2016-01-01

    This report examines the reporting of passenger boardings (unlinked passenger trips) by NPS transit systems that use a ticket sales conversion methodology. By studying and validating the park units' passenger boarding methodology from converting tick...

  12. Multispectral Thermal Imager Optical Assembly Performance and Integration of the Flight Focal Plane Assembly

    International Nuclear Information System (INIS)

    Blake, Dick; Byrd, Don; Christensen, Wynn; Henson, Tammy; Krumel, Les; Rappoport, William; Shen, Gon-Yen

    1999-01-01

    The Multispectral Thermal Imager Optical Assembly (OA) has been fabricated, assembled, successfully performance tested, and integrated into the flight payload structure with the flight Focal Plane Assembly (FPA) integrated and aligned to it. This represents a major milestone achieved towards completion of this earth observing E-O imaging sensor that is to be operated in low earth orbit. The OA consists of an off-axis three mirror anastigmatic (TMA) telescope with a 36 cm unobscured clear aperture, a wide-field-of-view (WFOV) of 1.82 along the direction of spacecraft motion and 1.38 across the direction of spacecraft motion. It also contains a comprehensive on-board radiometric calibration system. The OA is part of a multispectral pushbroom imaging sensor which employs a single mechanically cooled focal plane with 15 spectral bands covering a wavelength range from 0.45 to 10.7 m. The OA achieves near diffraction-limited performance from visible to the long-wave infrared (LWIR) wavelengths. The two major design drivers for the OA are 80% enpixeled energy in the visible bands and radiometric stability. Enpixeled energy in the visible bands also drove the alignment of the FPA detectors to the OA image plane to a requirement of less than 20 m over the entire visible detector field of view (FOV). Radiometric stability requirements mandated a cold Lyot stop for stray light rejection and thermal background reduction. The Lyot stop is part of the FPA assembly and acts as the aperture stop for the imaging system. The alignment of the Lyot stop to the OA drove the centering and to some extent the tilt alignment requirements of the FPA to the OA

  13. Nutritional and Anti – Nutritional Composition of the African ...

    African Journals Online (AJOL)

    Objective: To determine the nutritional and anti – nutritional composition of the African palmyrah palm (Borassus aethiopum). Subjects/ Materials and Methods: Studies were conducted on the proximate composition, vitamin C, total carotenoids and some anti-nutritional factors / toxins of the fresh seedling of the African ...

  14. Nutritional status of children on the National School Nutrition ...

    African Journals Online (AJOL)

    Background. School feeding programmes are intended to alleviate short-term hunger, improve nutrition and cognition of children, and provide incomes to families. Objectives. To assess the nutritional status of children receiving meals provided by the National School Nutrition Programme (NSNP) in Capricorn Municipality, ...

  15. Special Food and Nutrition Needs in School Nutrition Programs

    Science.gov (United States)

    Molaison, Elaine Fontenot; Nettles, Mary Frances

    2010-01-01

    Purpose/Objectives: The purpose of this research was to determine the prevalence of special food and/or nutrition needs in school nutrition programs. In addition, researchers focused on the issues surrounding these needs and the role of the school nutrition (SN) directors and managers in meeting these needs. Methods: An expert panel was used to…

  16. The Importance of Appropriate Nutrition and Nutrition Education.

    Science.gov (United States)

    Fuhr, Janet E.; Barclay, Kathy H.

    1998-01-01

    Discusses how nutrition education may be implemented in early childhood classrooms. Describes the incidence of malnutrition and obesity, and topics covered--the food pyramid, vegetable growth, and nutritional needs--through several integrated nutrition units including: (1) the bread basket; (2) potatoes; (3) vegetable soup; (4) fruit basket; (5)…

  17. Towards implementation of optimum nutrition and better clinical nutrition support

    NARCIS (Netherlands)

    Jonkers, C. F.; Prins, F.; van Kempen, A.; Tepaske, R.; Sauerwein, H. P.

    2001-01-01

    Clinical Nutrition Support--defined as nutrition for hospitalized patients suffering from metabolic stress--plays a limited role in the therapeutic routine of the physician. This is not surprising as most research in the field of clinical nutrition is disappointing with regard to the objective

  18. Hospital boards and hospital strategic focus: the impact of board involvement in strategic decision making.

    Science.gov (United States)

    Ford-Eickhoff, Karen; Plowman, Donde Ashmos; McDaniel, Reuben R

    2011-01-01

    Despite pressures to change the role of hospital boards, hospitals have made few changes in board composition or director selection criteria. Hospital boards have often continued to operate in their traditional roles as either "monitors" or "advisors." More attention to the direct involvement of hospital boards in the strategic decision-making process of the organizations they serve, the timing and circumstances under which board involvement occurs, and the board composition that enhances their abilities to participate fully is needed. We investigated the relationship between broader expertise among hospital board members, board involvement in the stages of strategic decision making, and the hospital's strategic focus. We surveyed top management team members of 72 nonacademic hospitals to explore the participation of critical stakeholder groups such as the board of directors in the strategic decision-making process. We used hierarchical regression analysis to explore our hypotheses that there is a relationship between both the nature and involvement of the board and the hospital's strategic orientation. Hospitals with broader expertise on their boards reported an external focus. For some of their externally-oriented goals, hospitals also reported that their boards were involved earlier in the stages of decision making. In light of the complex and dynamic environment of hospitals today, those charged with developing hospital boards should match the variety in the external issues that the hospital faces with more variety in board makeup. By developing a board with greater breadth of expertise, the hospital responds to its complex environment by absorbing that complexity, enabling a greater potential for sensemaking and learning. Rather than acting only as monitors and advisors, boards impact their hospitals' strategic focus through their participation in the strategic decision-making process.

  19. Liner mounting assembly

    Science.gov (United States)

    Halila, Ely E. (Inventor)

    1994-01-01

    A mounting assembly includes an annular supporting flange disposed coaxially about a centerline axis which has a plurality of circumferentially spaced apart supporting holes therethrough. An annular liner is disposed coaxially with the supporting flange and includes a plurality of circumferentially spaced apart mounting holes aligned with respective ones of the supporting holes. Each of a plurality of mounting pins includes a proximal end fixedly joined to the supporting flange through a respective one of the supporting holes, and a distal end disposed through a respective one of the liner mounting holes for supporting the liner to the supporting flange while unrestrained differential thermal movement of the liner relative to the supporting flange.

  20. Modelling Polar Self Assembly

    Science.gov (United States)

    Olvera de La Cruz, Monica; Sayar, Mehmet; Solis, Francisco J.; Stupp, Samuel I.

    2001-03-01

    Recent experimental studies in our group have shown that self assembled thin films of noncentrosymmetric supramolecular objects composed of triblock rodcoil molecules exhibit finite polar order. These aggregates have both long range dipolar and short range Ising-like interactions. We study the ground state of a simple model with these competing interactions. We find that the competition between Ising-like and dipolar forces yield a periodic domain structure, which can be controlled by adjusting the force constants and film thickness. When the surface forces are included in the potential, the system exhibits a finite macroscopic polar order.

  1. Nuclear reactor core assembly

    International Nuclear Information System (INIS)

    Baxi, C.B.

    1978-01-01

    The object of the present invention is to provide a fast reactor core assembly design for use with a fluid coolant such as liquid sodium or carbon monoxide incorporating a method of increasing the percentage of coolant flow though the blanket elements relative to the total coolant flow through the blanket and fuel elements during shutdown conditions without using moving parts. It is claimed that deterioration due to reactor radiation or temperature conditions is avoided and ready modification or replacement is possible. (U.K.)

  2. Enteral nutrition - child - managing problems

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000164.htm Enteral nutrition - child - managing problems To use the sharing features ... trouble breathing, call 911. References Mcclave SA. Enteral nutrition. In: Goldman L, Schafer AI, eds. Goldman-Cecil ...

  3. What Is Nutrition Support Therapy?

    Science.gov (United States)

    ... Sponsored CE Programs Calendar of Events What Is Nutrition Support Therapy All people need food to live. ... patient populations from pediatrics to geriatrics. Key Terms: Nutrition Support Therapy The provision of enteral or parenteral ...

  4. Nutritional Lifestyles of College Women

    National Research Council Canada - National Science Library

    Harmon, Michelle

    2001-01-01

    ...., second only to smoking. The purpose of this study is to explore the nutritional lifestyle of college women, and to determine if there are differences in nutritional lifestyle, as well as, perception of health status...

  5. IAEA Nobel Peace Prize cancer and nutrition fund

    International Nuclear Information System (INIS)

    Kinley, D. III

    2006-05-01

    The Norwegian Nobel Committee awarded the 2005 Nobel Peace Prize to the IAEA and Director General ElBaradei in equal shares. The IAEA and its Director General won the 2005 Peace Prize for their efforts to prevent nuclear energy from being used for military purposes and to ensure that nuclear energy for peaceful purposes is used in the safest possible way. The IAEA Board of Governors subsequently decided that the IAEA's share of the prestigious prize would be used to create a special fund for fellowships and training to improve cancer control and childhood nutrition in the developing world. This fund is known as the 'IAEA Nobel Peace Prize Cancer and Nutrition Fund'. The money will be dedicated to enhancing human resources in developing regions of the world for improved cancer control and childhood nutrition. In the area of cancer control, the money will be spent on establishing regional cancer training institutes for the training of new doctors, medical physicists and technologists in radiation oncology to improve cancer treatment and care, as part of the IAEA's Programme of Action for Cancer Therapy (PACT). In the realm of nutrition, the focus of the Fund will be on capacity building in the use of nuclear techniques to develop interventions to contribute to improved nutrition and health for children in the developing world. Fund-supported fellowship awards will target young professionals, especially women, from Member States, through the IAEA's Technical Cooperation (TC) Programme. Alongside such awards, regional events will be organized in Africa, Asia and Latin America in cancer control and nutrition during 2006. The IAEA Secretariat is encouraging Member States and donors to contribute to the IAEA Nobel Peace Prize Cancer and Nutrition Fund by providing additional resources, in cash and in-kind

  6. Nutrition of the transition cow

    OpenAIRE

    BEŇASOVÁ, Veronika

    2017-01-01

    This bachelor thesis titled Nutrition of the transition cow deals with nutrition of dairy cows in peripartum period with regard to prevention of development of metabolic diseases. Anatomy of digestive system and physiology of digestive processes are briefly described. Characteristic of nutrients and of the most common feeds used for nutrition of dairy cattle serves as introduction to formulation of dairy rations. Metabolic diseases caused by inadequate nutrition in transition period are the b...

  7. Gold recovery from printed wiring board using bioleaching

    Energy Technology Data Exchange (ETDEWEB)

    Kita, Y. [Faculty of Engineering, Osaka Univ. (Japan); Nishikawa, H. [Center for Advanced Science and Innovation, Osaka Univ. (Japan); Takemoto, T. [Joining and Welding Research Inst., Osaka Univ. (Japan)

    2004-07-01

    In the electronic assembly, gold is frequently used as surface plating and a bonding wire. To recover gold from waste electronics, the dissolution process using cyan is a popular method, however, the solution is highly toxic. Accordingly, the environmentally conscious substitute process is preferable. In this study the possibility of Au dissolution from printed wiring boards using bioleaching has been investigated. Chromobacterium violaceum having ability of cyanide formation was used to dissolve Au. The printed wiring boards with gold plating of 0.07nm in thickness were immersed in synthetic medium with C. violaceum. After immersion test for 480h, the gold plating was completely dissolved. The increase in cyanide concentration gave little effect on the enhancement of dissolution of gold, however, the dissolution rate of Au was increased with increasing of dissolved oxygen in the medium. Chromobacterium violaceum produced 0.8mmol/l cyanide but it also decomposed about 60% of cyanide generated, therefore, this dissolution process could be used as an environmentally conscious method. (orig.)

  8. Neonatal nutrition and metabolism

    National Research Council Canada - National Science Library

    Thureen, Patti J; Hay, William W

    2006-01-01

    ..., the volume highlights the important longterm effects of fetal and neonatal growth on health in later life. In addition, there are very practical chapters on methods and techniques for assessing nutritional status, body composition, and evaluating metabolic function. Written by an authoritative, international team of cont...

  9. Insects: A nutritional alternative

    Science.gov (United States)

    Dufour, P. A.

    1981-01-01

    Insects are considered as potential food sources in space. Types of insects consumed are discussed. Hazards of insect ingestion are considered. Insect reproduction, requirements, and raw materials conversion are discussed. Nutrition properties and composition of insects are considered. Preparation of insects as human food is discussed.

  10. Nutrition and Allergic Diseases

    Directory of Open Access Journals (Sweden)

    R.J.J. van Neerven

    2017-07-01

    Full Text Available The development of IgE-mediated allergic diseases is influenced by many factors, including genetic and environmental factors such as pollution and farming, but also by nutrition. In the last decade, substantial progress has been made in our understanding of the impact that nutrition can have on allergic diseases. Many studies have addressed the effect of breastfeeding, pre-, pro- and synbiotics, vitamins and minerals, fiber, fruit and vegetables, cow’s milk, and n-3 fatty acids, on the development of allergies. In addition, nutrition can also have indirect effects on allergic sensitization. This includes the diet of pregnant and breastfeeding women, which influences intrauterine development, as well as breastmilk composition. These include the diet of pregnant and breastfeeding women that influences intrauterine development as well as breastmilk composition, effects of food processing that may enhance allergenicity of foods, and effects via modulation of the intestinal microbiota and their metabolites. This editorial review provides a brief overview of recent developments related to nutrition and the development and management of allergic diseases.

  11. Youth, Nutrition and Behaviour

    NARCIS (Netherlands)

    Voordouw, J.; Snoek, H.M.; Broek, van den E.; Reinders, M.J.; Meeusen, M.J.G.; Veggel, van R.J.F.M.; Kooijman, V.M.; Stijnen, D.A.J.M.; Trentelman, I.

    2012-01-01

    Healthy nutrition is widely assumed to have a beneficial influence on educational performance and social behaviour. Yet research in developed countries about the effects of food intake on children's behaviour and school performance is limited. We propose a randomised controlled field experiment to

  12. Nutritional iron deficiency

    NARCIS (Netherlands)

    Zimmermann, M.B.; Hurrell, R.F.

    2007-01-01

    Iron deficiency is one of the leading risk factors for disability and death worldwide, affecting an estimated 2 billion people. Nutritional iron deficiency arises when physiological requirements cannot be met by iron absorption from diet. Dietary iron bioavailability is low in populations consuming

  13. Shopper marketing nutrition interventions.

    Science.gov (United States)

    Payne, Collin R; Niculescu, Mihai; Just, David R; Kelly, Michael P

    2014-09-01

    Grocery stores represent a context in which a majority of people's food purchases occur. Considering the nutrition quality of the population's food intake has dramatically decreased, understanding how to improve food choice in the grocery store is paramount to healthier living. In this work, we detail the type of financial resources from which shoppers could draw (i.e., personal income and benefits from government food assistance programs to low income populations) and explain how these financial resources are allocated in the grocery store (i.e., planned, unplanned, error). Subsequently, we identify a conceptual framework for shopper marketing nutrition interventions that targets unplanned fruit and vegetable purchases (i.e., slack, or willingness to spend minus list items). Targeting slack for fresh fruit and vegetable purchases allows retailers to benefit economically (i.e., fruit and vegetables are higher margin) and allows shoppers to improve their nutrition without increasing their budgets (i.e., budget neutrality). We also provide preliminary evidence of what in-store marketing of fresh fruits and vegetables could entail by modifying grocery carts and grocery floors to provide information of what is common, normal, or appropriate fruit and vegetable purchases. In each example, fresh fruit and vegetable purchases increased and evidence suggested shopper budget neutrality. To provide context for these results, we detail measurement tools that can be used to measure shopper behaviors, purchases, and consumption patterns. Finally, we address theoretical, practical, and policy implications of shopper marketing nutrition interventions. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Nutritional disorders in chrysanthemums

    NARCIS (Netherlands)

    Roorda van Eysinga, J.P.N.L.; Smilde, K.W.

    1980-01-01

    This book is a guide to diagnosing nutritional disorders in chrysanthemums. Deficiencies and toxicities are included, fifteen in all. Colour plates and descriptions are given for nitrogen, phosphorus, potassium, magnesium, calcium, sulphur, boron, copper, manganese, iron and zinc deficiency and for

  15. Cystic fibrosis - nutrition

    Science.gov (United States)

    ... and crackers, muffins, or trail mix. Try to eat regularly, even if it is only a few bites. Or, include a nutrition supplement or milkshake. Be flexible. If you aren't hungry at dinner time, make breakfast, mid-morning snacks, and lunch ...

  16. Food security and nutrition

    International Development Research Centre (IDRC) Digital Library (Canada)

    Efforts to improve one of the world's most resilient staples — cassava — have paid off, with lasting and, in some instances, dra- matic benefits. Plant breeding has increased this starchy root's nutritional value and dis- ease resistance, saving countless lives. IDRC has long recognized cassava, also known as manioc, as an ...

  17. [Nutritional support in sepsis].

    Science.gov (United States)

    Ortiz Leyba, C; López Martínez, J; Blesa Malpica, A L

    2005-06-01

    Although it is considered that metabolic and nutritional support must be part of the management of septic patients, it has not been conclusively shown that nutritional support will improve survival or complications from sepsis. Specific data on this issue are scarce since there are few studies that have investigated specialized nutritional support in septic patients. Thus, most of the recommendations are based on outcomes obtained in severely ill patients with different pathologies. It is assumed that nutritional support should be carried out through the enteral route whenever possible, as in other critically ill patients. The energetic waste in these patients is highly variable, although in general terms the hypermetabolic situation may be classified as moderate. An adjustment factor of 1.25-1.30 is recommended for the Harris-Benedict's equation to calculate the caloric intake. Septic patients should receive a hyperproteic intake. The amount of glucose administered should not exceed 70% of non-protein calories, and lipids intake should not exceed 40%. With regards to micronutrients, it is recommended to increase the supply of those with antioxidant properties (vitamin E, carotenes, vitamin C, selenium). There are data to consider that the use of diets enriched with pharmaco-nutrients (both with parenteral and enteral routes) may be beneficial in septic patients, although there is some controversy when interpreting the outcomes.

  18. Tuberculosis and nutrition

    Directory of Open Access Journals (Sweden)

    Gupta Krishna

    2009-01-01

    Full Text Available Malnutrition and tuberculosis are both problems of considerable magnitude in most of the underdeveloped regions of the world. These two problems tend to interact with each other. Tuberculosis mortality rates in different economic groups in a community tend to vary inversely with their economic levels. Similarly, nutritional status is significantly lower in patients with active tuberculosis compared with healthy controls. Malnutrition can lead to secondary immunodeficiency that increases the host′s susceptibility to infection. In patients with tuberculosis, it leads to reduction in appetite, nutrient malabsorption, micronutrient malabsorption, and altered metabolism leading to wasting. Both, protein-energy malnutrition and micronutrients deficiencies increase the risk of tuberculosis. It has been found that malnourished tuberculosis patients have delayed recovery and higher mortality rates than well-nourished patients. Nutritional status of patients improves during tuberculosis chemotherapy. High prevalence of human immunodeficiency (HIV infection in the underdeveloped countries further aggravates the problem of malnutrition and tuberculosis. Effect of malnutrition on childhood tuberculosis and tuberculin skin test are other important considerations. Nutritional supplementation may represent a novel approach for fast recovery in tuberculosis patients. In addition, raising nutritional status of population may prove to be an effective measure to control tuberculosis in underdeveloped areas of world.

  19. Nutrition in Children's Sports.

    Science.gov (United States)

    Smith, Nathan J.

    Young athletes need to be aware of the importance of good nutrition to athletic performance. A basic diet plan, worked out with a physician to satisfy energy and weight needs, is essential. The best eating schedule and amount and type of food varies with different sports depending on the intensity and duration of physical activity. Weight control…

  20. Maternal nutrition in Nigeria

    African Journals Online (AJOL)

    2017-08-05

    Aug 5, 2017 ... Results: Undernutrition in women aged 15–49 years decreased from ... Food restrictions/taboos are common with proteins and vegetable. ... This is an open access article distributed under the terms of the ... economic resources—all critical toward good nutrition that ..... Indian J Pediatr 2004;71:1007-14. 23.

  1. Sleep, Exercise, and Nutrition.

    Science.gov (United States)

    Harrelson, Orvis A.; And Others

    The first part of this booklet concerns why sleep and exercise are necessary. It includes a discussion of what occurs during sleep and what dreams are. It also deals with the benefits of exercise, fatigue, posture, and the correlation between exercise and personality. The second part concerns nutrition and the importance of food. This part covers…

  2. Nutritional disturbances by adolescent

    OpenAIRE

    Stassart, Martine

    2011-01-01

    The nutritional disturbances are frequent by adolescents. That is a psychological defense against dependance toward the mother but also a middle to remain in a childish position i.e. either as a fat baby - in the fall of obesity- or as the ideal pre- or bisexual great child - in the case of anorexia.

  3. Automatic maintenance payload on board of a Mexican LEO microsatellite

    Science.gov (United States)

    Vicente-Vivas, Esaú; García-Nocetti, Fabián; Mendieta-Jiménez, Francisco

    2006-02-01

    Few research institutions from Mexico work together to finalize the integration of a technological demonstration microsatellite called Satex, aiming the launching of the first ever fully designed and manufactured domestic space vehicle. The project is based on technical knowledge gained in previous space experiences, particularly in developing GASCAN automatic experiments for NASA's space shuttle, and in some support obtained from the local team which assembled the México-OSCAR-30 microsatellites. Satex includes three autonomous payloads and a power subsystem, each one with a local microcomputer to provide intelligent and dedicated control. It also contains a flight computer (FC) with a pair of full redundancies. This enables the remote maintenance of processing boards from the ground station. A fourth communications payload depends on the flight computer for control purposes. A fifth payload was decided to be developed for the satellite. It adds value to the available on-board computers and extends the opportunity for a developing country to learn and to generate domestic space technology. Its aim is to provide automatic maintenance capabilities for the most critical on-board computer in order to achieve continuous satellite operations. This paper presents the virtual computer architecture specially developed to provide maintenance capabilities to the flight computer. The architecture is periodically implemented by software with a small amount of physical processors (FC processors) and virtual redundancies (payload processors) to emulate a hybrid redundancy computer. Communications among processors are accomplished over a fault-tolerant LAN. This allows a versatile operating behavior in terms of data communication as well as in terms of distributed fault tolerance. Obtained results, payload validation and reliability results are also presented.

  4. Design principles and realization of electro-optical circuit boards

    Science.gov (United States)

    Betschon, Felix; Lamprecht, Tobias; Halter, Markus; Beyer, Stefan; Peterson, Harry

    2013-02-01

    The manufacturing of electro-optical circuit boards (EOCB) is based to a large extent on established technologies. First products with embedded polymer waveguides are currently produced in series. The range of applications within the sensor and data communication markets is growing with the increasing maturity level. EOCBs require design flows, processes and techniques similar to existing printed circuit board (PCB) manufacturing and appropriate for optical signal transmission. A key aspect is the precise and automated assembly of active and passive optical components to the optical waveguides which has to be supported by the technology. The design flow is described after a short introduction into the build-up of EOCBs and the motivation for the usage of this technology within the different application fields. Basis for the design of EOCBs are the required optical signal transmission properties. Thereafter, the devices for the electro-optical conversion are chosen and the optical coupling approach is defined. Then, the planar optical elements (waveguides, splitters, couplers) are designed and simulated. This phase already requires co-design of the optical and electrical domain using novel design flows. The actual integration of an optical system into a PCB is shown in the last part. The optical layer is thereby laminated to the purely electrical PCB using a conventional PCB-lamination process to form the EOCB. The precise alignment of the various electrical and optical layers is thereby essential. Electrical vias are then generated, penetrating also the optical layer, to connect the individual electrical layers. Finally, the board has to be tested electrically and optically.

  5. Nutrition and Liver Health.

    Science.gov (United States)

    Jackson, Alan A

    2017-01-01

    Good clinical practice is based on a secure and accurate diagnosis. Poor nutrition is frequently associated with disorders of the liver, and a specific nutrition diagnosis is needed for providing best care and experiencing successful outcome. There is opportunity for better-structured approaches to making secure and consistent nutritional diagnoses in patients with liver disease. Nutrition is the set of integrated processes by which cells, tissues, organs and the whole body acquire the energy and nutrients to retain normal structure and perform the required functions. At the level of the whole body, this is achieved through dietary supply and the capacity of the body to transform the substrates and cofactors necessary for metabolism. All of these domains (diet, metabolic capacity, activity of the microbiome, body composition and the level of demand for energy and nutrients) are influenced by levels of physical activity and can vary according to physiological and pathological disease states. The liver plays a central role in establishing and maintaining these regulated processes. Its capacity to achieve and maintain these functional capabilities is established during one's early life. When these capabilities are exceeded and the ability to maintain the milieu interieur is compromised, ill-health supervenes. Stress tests that assess flow through gateway pathways can be used to determine the maximal capacity and functional reserve for critical functions. The inability of the liver to reliably integrate body lipid metabolism and the accumulation of abnormal lipid are obvious manifestations of impaired regulation both in situations of weight loss, for example, the fatty liver of severe malnutrition, and in situations of energy excess, as in non-alcoholic fatty liver disease. The use of stable isotopic probes and the more recent definition of the variability in the metabolome in different nutritional and pathological states indicate the great potential for clinical tools

  6. Home parenteral nutrition in children

    International Nuclear Information System (INIS)

    Kalousova, J.; Rouskova, B.; Styblova, J.

    2011-01-01

    Parenteral nutrition delivered at home presents a major improvement in the quality of life of children dependent on long term parenteral nutrition. Indications, technical conditions, logistics, complications, prognosis of home parenteral nutrition as well as some health-care issues to be addressed by pediatric practitioner are summarized. (author)

  7. Personalised nutrition: Status and perspectives

    NARCIS (Netherlands)

    Joost, H.G.; Gibney, M.J.; Cashman, K.D.; Görman, U.; Hesketh, J.E.; Mueller, M.; Ommen, B. van; Williams, C.M.; Mathers, J.C.

    2007-01-01

    Personalised, genotype-based nutrition is a concept that links genotyping with specific nutritional advice in order to improve the prevention of nutrition-associated, chronic diseases. This review describes the current scientific basis of the concept and discusses its problems. There is convincing

  8. Sports Nutrition for Young Athletes

    Science.gov (United States)

    Cotugna, Nancy; Vickery, Connie E.; McBee, Sheldon

    2005-01-01

    Nutritional needs for peak athletic performance include sufficient calorie intake, adequate hydration, and attention to timing of meals. Student athletes and their advisors often are misinformed or have misconceptions about sports nutrition. This paper identifies nutritional needs of young athletes, reviews common misconceptions, and examines the…

  9. State of nutrition support teams.

    Science.gov (United States)

    DeLegge, Mark Henry; Kelly, Andrea True; Kelley, Andrea True

    2013-12-01

    The incidence of malnutrition in hospitalized patients is relatively high (up to 55%) despite breakthroughs in nutrition support therapies. These patients have increased morbidity and mortality, extended hospital stays, and care that is associated with higher costs. These patients are often poorly managed due to inadequate nutrition assessment and poor medical knowledge and practice in the field of nutrition. Nutrition support teams (NSTs) are interdisciplinary support teams with specialty training in nutrition that are often comprised of physicians, dietitians, nurses, and pharmacists. Their role includes nutrition assessment, determination of nutrition needs, recommendations for appropriate nutrition therapy, and management of nutrition support therapy. Studies have demonstrated significant improvements in patient nutrition status and improved clinical outcomes as well as reductions in costs when patients were appropriately managed by a multispecialty NST vs individual caregivers. Despite this, there has been steady decline in the number of formal NST in recent years (65% of hospitals in 1995 to 42% in 2008) as hospitals and other healthcare organizations look for ways to cut costs. Given the importance of nutrition status on clinical outcomes and overall healthcare costs, a number of institutions have introduced and sustained strong nutrition training and support programs and teams, demonstrating both clinical and economic benefit. The benefits of NST, training and implementation strategies, and tips for justifying these clinically and economically beneficial groups to healthcare organizations and governing bodies are discussed in this review.

  10. Nutrition communication in general practice

    NARCIS (Netherlands)

    Dillen, van S.M.E.; Hiddink, G.J.; Koelen, M.A.; Graaf, de C.; Woerkum, van C.M.J.

    2006-01-01

    General practitioners (GPs) are frequently confronted with patients who suffer from obesity or other nutrition-related diseases, such as diabetes and coronary heart disease. There is increasing evidence that nutrition communication is effective in changing nutrition behaviour. Moreover, it is widely

  11. 78 FR 67333 - Performance Review Board Membership

    Science.gov (United States)

    2013-11-12

    ... DEPARTMENT OF COMMERCE Performance Review Board Membership AGENCY: Economics and Statistics... eligible to serve on the Performance Review Board (PRB) in accordance with the Economics and Statistics.... Arnold William G. Bostic, Jr. Stephen B. Burke Joanne Buenzli Crane Susan R. Helper Ron S. Jarmin Enrique...

  12. Board Size Effects in Closely Held Corporations

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Kongsted, H.C.; Meisner Nielsen, Kasper

    2004-01-01

    of board size by using a new instrument given bythe number of children of the founders of the firms. Our analysis shows thatboard size can be taken as exogenous in the performance equation. Furthermore,based on a flexible model specification we find that there is noempirical evidence of adverse board size...

  13. Using a board game to reinforce learning.

    Science.gov (United States)

    Yoon, Bona; Rodriguez, Leslie; Faselis, Charles J; Liappis, Angelike P

    2014-03-01

    Experiential gaming strategies offer a variation on traditional learning. A board game was used to present synthesized content of fundamental catheter care concepts and reinforce evidence-based practices relevant to nursing. Board games are innovative educational tools that can enhance active learning. Copyright 2014, SLACK Incorporated.

  14. Nonlinear finite element modeling of corrugated board

    Science.gov (United States)

    A. C. Gilchrist; J. C. Suhling; T. J. Urbanik

    1999-01-01

    In this research, an investigation on the mechanical behavior of corrugated board has been performed using finite element analysis. Numerical finite element models for corrugated board geometries have been created and executed. Both geometric (large deformation) and material nonlinearities were included in the models. The analyses were performed using the commercial...

  15. Gender Quotas on Board of Directors

    DEFF Research Database (Denmark)

    Smith, Nina

    2013-01-01

    Beside arguments of fairness and equal opportunities, it is often argued that gender diversity on boards of directors may improve firm performance, but the empirical results are mixed and often negative. Based on the available research, gender quotas on boards of directors cannot be justified...

  16. 49 CFR 1018.95 - Board determination.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Board determination. 1018.95 Section 1018.95... determination. (a) Following review of the evidence, the Board will issue a written decision which will include... determination, it shall notify the debtor of its intent to refer the debt to the IRS for offset against the...

  17. 42 CFR 56.304 - Governing board.

    Science.gov (United States)

    2010-10-01

    ...) Composition. (1) A majority of the board members must be migratory and seasonal agricultural workers and..., finance and banking, legal affairs, trade unions, and other commercial and industrial concerns, or social... establishment of policy in the conduct of the center. (2) The governing board shall hold regularly scheduled...

  18. 78 FR 66785 - SES Performance Review Board

    Science.gov (United States)

    2013-11-06

    ... Safety Board. Steven E. Goldberg, Chief Financial Officer, National Transportation Safety Board. John.... Goldberg's rating review). Anthony P. Scardino, Chief Financial Officer, U.S. Patent and Trademark Office... CONTACT: Emily T. Carroll, Chief, Human Resources Division, Office of Administration, National...

  19. Faculty and Governing Boards: Building Bridges.

    Science.gov (United States)

    Perley, James E.

    1997-01-01

    It is important for governing boards to understand that faculty see themselves less as employees than as officers of the institution, charged with constantly seeking the best for their discipline even if the values they advance seem at odds with those of the administration or board. They cherish collegiality, direct communication, and respect for…

  20. 12 CFR 704.4 - Board responsibilities.

    Science.gov (United States)

    2010-01-01

    ... of liquidity, market, and credit risk associated with current activities) are produced timely in... Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS CORPORATE CREDIT UNIONS § 704.4 Board responsibilities. (a) General. A corporate credit union's board of directors...

  1. 14 CFR 389.16 - Board publications.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Board publications. 389.16 Section 389.16...) ORGANIZATION FEES AND CHARGES FOR SPECIAL SERVICES Fees for Special Services § 389.16 Board publications. (a) Charges for publications. Charges have been established by the Superintendent of Documents for...

  2. Augmentation of board games using smartphones

    DEFF Research Database (Denmark)

    Kulsinskas, Arturas; Balan, Catalin; Egede Bukdahl, Nicholas

    2015-01-01

    This paper contains details about research into the effect of digital augmentation on social presence in board games. A case study of the board game Tobago was performed during the project and a prototype application for smartphones was developed in order to compare the players’ social presence...

  3. The Inner Workings of the Board

    DEFF Research Database (Denmark)

    de Haas, Ralph; Ferreira, Daniel; Kirchmaier, Tom

    We survey non-executive directors in emerging markets to obtain detailed information about the inner workings of corporate boards across a variety of institutional settings. We document substantial variation in the structure and conduct of boards as well as in directors’ perceptions about the local...

  4. 77 FR 61379 - Performance Review Board Membership

    Science.gov (United States)

    2012-10-09

    ... DEPARTMENT OF COMMERCE Performance Review Board Membership AGENCY: Economics and Statistics... eligible to serve on the Performance Review Board (PRB) in accordance with the Economics and Statistics.... Arnold William G. Bostic, Jr. Joanne Buenzli Crane Justin R. Ehrenwerth Ron S. Jarmin Theodore A. Johnson...

  5. 75 FR 57440 - Performance Review Board Membership

    Science.gov (United States)

    2010-09-21

    ... DEPARTMENT OF COMMERCE Performance Review Board Membership AGENCY: Economics and Statistics... the Performance Review Board in accordance with the Economics and Statistics Administration's Senior... Callahan, Nancy M. Gordon, Howard R. Hogan, Arnold A. Jackson, Theodore A. Johnson, Steven J. Jost, J...

  6. Board diligence, director business and corporate governance

    Directory of Open Access Journals (Sweden)

    Saibal Ghosh

    2007-11-01

    Full Text Available The paper examines the association between financial performance and boards of non-financial firms. Using data on over 200 listed manufacturing firms in India for 2005, the findings indicate that, after controlling for various firm-specific factors, board diligence as well as director busyness exerts a positive influence on corporate performance.

  7. Governing Board of the Pension Fund

    CERN Multimedia

    2006-01-01

    The Governing Board of the Pension Fund held its 142nd meeting on 14 March 2006. As an introduction to the meeting, the Administrator underlined that, at 12.4%, the performance achieved by the Fund on its assets had been excellent and had taken the Fund's assets at the end of the year to 4,209 MCHF, which was well above the 4 billion Swiss franc mark. The Chairman of the Governing Board, Professor Ferrini, reported on the Board's closed session on 7 March to examine the nominations received for the election of the Vice-Chairmen of the Governing Board of the Pension Fund. The Governing Board had unanimously agreed to recommend the CERN Council to appoint Mr A. J. Naudi and Dr J.-P. Matheys. At its session on 16 March 2006, the Council had followed the recommendation of the Governing Board by re-appointing J.-P. Matheys and A. J. Naudi Vice-Chairmen of the Board until the end of their respective terms of office as members of the Governing Board. Regarding the comparison with other European pension funds launc...

  8. 78 FR 22545 - Performance Review Board

    Science.gov (United States)

    2013-04-16

    ... FURTHER INFORMATION CONTACT: Harriette H. Charbonneau, Director of Human Resources, Federal Maritime... prescribed by the Office of Personnel Management, one or more performance review boards. The board shall..., Managing Director 15. Austin L. Schmitt, Director, Strategic Planning and Regulatory Review [FR Doc. 2013...

  9. Gendered Behavior Patterns in School Board Governance

    Science.gov (United States)

    Mountford, Meredith; Brunner, C. Cryss

    2010-01-01

    Background/Context: Educational leadership literature lacks research focused on how gender influences decision making, in particular at the highest level of school governance, the school board table. Consequently, whether gender makes a difference during decision making at the school board table has yet to be determined. Purpose/Objective/Research…

  10. 42 CFR 456.716 - DUR Board.

    Science.gov (United States)

    2010-10-01

    ... most effectively lead to improvement in the quality of drug therapy. The DUR board recommendations must... review, evaluation, and intervention. (4) Medical quality assurance. (b) Board composition. At least one... predetermined standards that pharmacies not using approved software must use in conducting prospective DUR. (2...

  11. Boys' boarding school management: understanding the choice ...

    African Journals Online (AJOL)

    The South African secondary boarding school sector has become more competitive as schools attempt to attract and retain pupils. Management of such schools must not only address the educational and boarding needs of pupils, but also apply appropriate management and marketing principles to compete effectively with ...

  12. Progress of EMBarrel assembly

    CERN Multimedia

    Chalifour, M

    2002-01-01

    The assembly of the sixteen "M" modules into a vertical axis cylinder has been achieved last Friday, completing the first wheel of the Electromagnetic Barrel Calorimeter (see picture). With this, an important milestone in the construction of the ATLAS detector has been reached. Future steps are the rotation of the cylinder axis into horizontal position, in order to integrate the presamplers and heat exchangers by the end of October. The transportation of the wheel and its insertion into the cryostat is the next major milestone, and is planned for the beginning of 2003. The construction of the modules (the so-called "P" modules) of the second wheel is ongoing at Saclay, Annecy and CERN, and will be completed in the coming months. The assembly of the second wheel should start at CERN in February, and its insertion in the cryostat is scheduled for June 2003. This achievement is the result of a successful collaboration of all institutes involved in the construction of the EM Barrel, namely Annecy, Saclay and CE...

  13. Fuel assembly supporting structure

    International Nuclear Information System (INIS)

    Aisch, F.W.; Fuchs, H.P.; Knoedler, D.; Steinke, A.; Steven, J.

    1976-01-01

    For use in forming the core of a pressurized-water reactor, a fuel assembly supporting structure for holding a bundle of interspaced fuel rods, is formed by interspaced end pieces having holes in which the end portions of control rod guide tubes are inserted, fuel rod spacer grids being positioned by these guide tubes between the end pieces. The end pieces are fastened to the end portions of the guide tubes, to integrate the supporting structure, and in the case of at least one of the end pieces, this is done by means which releases that end piece from the guide tubes when the end pieces receive an abnormal thrust force directed towards each other and which would otherwise place the guide tubes under a compressive stress that would cause them to buckle. The spacer grids normally hold the fuel rods interspaced by distances determined by nuclear physics, and buckling of the control rod guide tubes can distort the fuel rod spacer grids with consequent dearrangement of the fuel rod interspacing. A sudden loss of pressure in a pressurized-water reactor pressure vessel can result in the pressurized coolant in the vessel discharging from the vessel at such high velocity as to result in the abnormal thrust force on the end pieces of each fuel assembly, which could cause buckling of the control rod guide tubes when the end pieces are fixed to them in the normal rigid and unyielding manner

  14. ANNUAL GENERAL ASSEMBLY

    CERN Multimedia

    2001-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Auditorium on Wednesday 3 October 2001 at 14.30 hrs The Agenda comprises:   Opening Remarks (P. Levaux) Some aspects of risk in a pension fund (C. Cuénoud) Annual Report 2000: Presentation and results (C. Cuénoud) Copies of the Report are available from divisional secretariats. Results of the actuarial reviews (G. Maurin) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (P. Levaux) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2000 General Assembly are available from the Administration of the Fund (tel. + 41 22 767 91 94; e-mail Graziella.Praire@cern.ch) The English version will be published next week.

  15. Bottom head assembly

    International Nuclear Information System (INIS)

    Fife, A.B.

    1998-01-01

    A bottom head dome assembly is described which includes, in one embodiment, a bottom head dome and a liner configured to be positioned proximate the bottom head dome. The bottom head dome has a plurality of openings extending there through. The liner also has a plurality of openings extending there through, and each liner opening aligns with a respective bottom head dome opening. A seal is formed, such as by welding, between the liner and the bottom head dome to resist entry of water between the liner and the bottom head dome at the edge of the liner. In the one embodiment, a plurality of stub tubes are secured to the liner. Each stub tube has a bore extending there through, and each stub tube bore is coaxially aligned with a respective liner opening. A seat portion is formed by each liner opening for receiving a portion of the respective stub tube. The assembly also includes a plurality of support shims positioned between the bottom head dome and the liner for supporting the liner. In one embodiment, each support shim includes a support stub having a bore there through, and each support stub bore aligns with a respective bottom head dome opening. 2 figs

  16. ULTRASONIC ASSEMBLY [REVIEW

    Directory of Open Access Journals (Sweden)

    PORAV Viorica

    2015-05-01

    Full Text Available The paper exposes the possibility of machine producesers to optimize the costs of clothes assembling. Ultrasonic systems being frequently utilized have many advantages on semi products of synthetic textile and technical textile. First of all, sewing – cutting process can be accomplished under high speeds and rate of losses can be minimized. Cutting seal applications are frequently used for underwear and sportswear. Slicing and unit cutting machines, as well as portable sealing machines are available for labeling sector. Products such as bag, pocket and cover can be sewed in a seamless manner for promotion purposes. All objects in terms of accessories are obtained in same standard. Our quilting machines are preferred in worldwide due to its threadless, high quality sealing. An alternative to the classic sewing assembly, with thread and needles is ultrasonic seaming. In ultrasonic welding, there are no connective bolts, nails, soldering materials, or adhesives necessary to bind the materials together. Ultrasonic is defined as acoustic frequencies above the range audible to the human ear. Ultrasonic frequencies are administered to the fabric from the sonotrode of bonding machine. The high frequency and powerful energy produced, when is release in one special environment, the ultrasound heating this environment. The ability to ultrasonic weld textiles and films depend on their thermoplastic contents and the desired end results. The paper defines the weld ability of more common textiles and films. The welding refers to all types of bonding and sealing, as in point bonding of fabric, or continuous sealing of film.

  17. PWR fuel assembly

    International Nuclear Information System (INIS)

    Yamada, Yuji.

    1995-01-01

    A lower end plug is secured to a lower end of a thimble tube. A bolt-like thimble screw is screw-coupled and fastened to a female screw disposed to the end plug by way of a bushing screw-coupled to a lower nozzle. Then, the thimble screw and the lower nozzle are welded to secure the thimble tube and the lower nozzle. The lower portion of the bushing extends near the lower surface of the lower nozzle. The extended portion is provided with a recess to which a bolt head of the thimble screw is tightly inserted and a seating-face portion against which a seating-face of the bolt head abuts. Then, the extended portion of the bushing and the lower nozzle are spot-welded on the side of the lower surface of the nozzle, to prevent rotation of the bushing. This can easily prevent the rotation of the bushing after adjustment, to simplify the assembling of the fuel assembly. (I.N.)

  18. Nutrition in Africa.

    Science.gov (United States)

    Murray-lee, M

    1989-07-01

    Village women have adopted techniques set down by UNICEF in achieving higher food production and, ultimately, self sufficiency. Women's cooperatives integrate kitchen gardening and irrigated agriculture in an effort to combat the complex nutritional problems in Africa. Projects also offered training in a variety of areas including management of plots, labor-saving technology--diesel-driven grinding mills, rice husking, machines, wells with hand pumps, motor pumps for irrigation, all geared towards women benefitting themselves by growing their own food and furthering their children's health and development. Projects such as the one in Senegal were undertaken in other regions of Africa, like the Sahel and the Wadis--low-lying areas. From these projects, aid agencies and governments have suggested a number of recommendations in seeking a solution to Africa's nutritional problems. 1st, a balance between production of cash crops and food for consumption is called for. 2nd, research is necessary to improve the quality of locally grown food as much as livestock. 3rd, governments should extend surface area cultivation, 4th, more research on the advantage of indigenous food plants, 5th, women should be in on all levels of decision making in food production, 6th, governments should increase women farmer's efficiency, and further women's access to land and credit and 7th, women should be provided with increased educational opportunities. Nutrition in developing countries cannot be viewed as an isolated phenomenon--solutions to nutritional development should include all aspects of the problem including health and nutrition education, growth monitoring, water supply, literacy, technological know-how, and agricultural and plant and soil conservation.

  19. Assembly Manual for the Berkeley Lab Cosmic Ray Detector

    International Nuclear Information System (INIS)

    Collier, Michael

    2002-01-01

    The Berkeley Lab Cosmic Ray Detector consists of 3 main components that must be prepared separately before they can be assembled. These components are the scintillator, circuit board, and casing. They are described in the main sections of this report, which may be completed in any order. Preparing the scintillator paddles involves several steps--cutting the scintillator material to the appropriate size and shape, preparing and attaching Lucite cookies (optional), polishing the edges, gluing the end to the photomultiplier tube (optional), and wrapping the scintillator. Since the detector has 2 paddles, each of the sections needs to be repeated for the other paddle

  20. New trends in designing NPP control boards

    International Nuclear Information System (INIS)

    Kondrat'ev, V.V.

    1981-01-01

    A short analytical summary of the latest developments and future trends in designing NPP control boards is given. The designs of the Westinghause and the Hynkley-Point NPP control boards are described in detail. The essence of the advanced control board concept consists , firstly, in expanded use of computer-controlled displays for the sake of reducing the content of unimportant information presented to an operator, and, secondary, in better account of human possibilities to convert the NPP operation information into a more suitable form. An enlarged use of the direct digital reactor control utilizing microprocessors is expected. Besides, the employment of full-scale control board mock-ups and information desks as well as testing newly-developed control boards at computer reactor simulators are concluded to be used at all-growing rate [ru

  1. VME bus based microcomputer system boards

    International Nuclear Information System (INIS)

    Chandra, A.K.; Ganesh, G.; Mayya, Anuradha; Chachondia, A.S.; Premraj, M.K.

    1991-01-01

    Several operator information systems for nuclear plants has been developed in the Division and these have involved extensive use of microcomputer boards for achieving various functions. Standard VME bus based boards have been developed to provide the most used functions. These boards have been fabricated and tested and used in several systems including Channel Temperature Monitoring systems, Disturbance Recording Systems etc. and are also proposed to be used in additional systems under developement. The use of standard bus and boards provides considerable savings in engineering time, prototyping, testing and evaluation costs, and maintenance support. This report desribes the various boards developed and the functions available on each. (author). 4 refs., 11 figs., 3 appendixes

  2. MATTERS PRESENTED AT THE JOINT BOARDS MEETING

    CERN Multimedia

    T. Virdee

    CMS Organisation (T. Virdee) The Management Board endorsed J. Incandela as Deputy Physics Coordinator; he would move to CERN in the middle of 2007. The Board also took note of the Level-2 Convenors in Computing, Offline Software and Physics. Suggestions for the unfilled positions were still welcome. It was urgent to appoint a Database Coordinator. In the cases where only one Level-2 coordinator was being nominated the second would be nominated in 9 months. It was stressed that the SLHC working group must do real simulations to address questions about the machine design. The Management Board took note of the proposal to formally assign Mentors to Physics and analysis groups, of the nominations of the Convenors of the Detector Performance Groups and recommended that the Trigger Coordinator be appointed soon. Discussion on Technical Recommendations (A. Ball) The Board was reminded of the conclusions presented at the Joint Boards meeting. The present planning assumed that the YB0 services installation could...

  3. An effective board from a team perspective

    Directory of Open Access Journals (Sweden)

    Eythor Ivar Jonsson

    2006-11-01

    Full Text Available This paper looks at boards from a team perspective, where insights from research on teams are used to discuss some classical problems of corporate governance. The Enron-case is used as an underlying theme as it portrays some of the biggest challenges that boards face today. Theories developed within the team literature emphasise that for boards to become more effective they need more time and better access to information as a source of knowledge, more structure and purposeful roles for directors and for the board in general, and they need to become smaller and more focused. In effect, the culture of teams could have avoided some of the blunders of the Enron board.

  4. Optimal boarding method for airline passengers

    Energy Technology Data Exchange (ETDEWEB)

    Steffen, Jason H.; /Fermilab

    2008-02-01

    Using a Markov Chain Monte Carlo optimization algorithm and a computer simulation, I find the passenger ordering which minimizes the time required to board the passengers onto an airplane. The model that I employ assumes that the time that a passenger requires to load his or her luggage is the dominant contribution to the time needed to completely fill the aircraft. The optimal boarding strategy may reduce the time required to board and airplane by over a factor of four and possibly more depending upon the dimensions of the aircraft. I explore some features of the optimal boarding method and discuss practical modifications to the optimal. Finally, I mention some of the benefits that could come from implementing an improved passenger boarding scheme.

  5. 4 CFR 22.2 - Board Consideration [Rule 2].

    Science.gov (United States)

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Board Consideration [Rule 2]. 22.2 Section 22.2 Accounts... OFFICE CONTRACT APPEALS BOARD § 22.2 Board Consideration [Rule 2]. (a) Offices. The office of the Board... consideration of a matter by all members of the Contract Appeals Board will not be granted in any appeal filed...

  6. 29 CFR 1207.2 - Requests for Mediation Board action.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Requests for Mediation Board action. 1207.2 Section 1207.2 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD ESTABLISHMENT OF SPECIAL ADJUSTMENT BOARDS § 1207.2 Requests for Mediation Board action. (a) Requests for the National Mediation Board...

  7. 78 FR 73187 - Black Hills National Forest Advisory Board

    Science.gov (United States)

    2013-12-05

    ... DEPARTMENT OF AGRICULTURE Forest Service Black Hills National Forest Advisory Board AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The Black Hills National Forest Advisory Board (Board... all members of the Advisory Board; (2) provide orientation to Board Members on Basic Laws governing...

  8. 46 CFR 78.90-1 - Pilot boarding operation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Pilot boarding operation. 78.90-1 Section 78.90-1... Boarding Operations § 78.90-1 Pilot boarding operation. (a) The master shall ensure that pilot boarding... instructions. (b) The master shall ensure compliance with the following during pilot boarding operations: (1...

  9. 12 CFR 905.4 - Duties of the Finance Board.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Duties of the Finance Board. 905.4 Section 905.4 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND OPERATIONS DESCRIPTION OF ORGANIZATION AND FUNCTIONS Functions and Responsibilities of Finance Board § 905.4 Duties of the Finance Board. (a) Bank Syste...

  10. Selecting Operations for Assembler Encoding

    Directory of Open Access Journals (Sweden)

    Tomasz Praczyk

    2010-04-01

    Full Text Available Assembler Encoding is a neuro-evolutionary method in which a neural network is represented in the form of a simple program called Assembler Encoding Program. The task of the program is to create the so-called Network Definition Matrix which maintains all the information necessary to construct the network. To generate Assembler Encoding Programs and the subsequent neural networks evolutionary techniques are used.
    The performance of Assembler Encoding strongly depends on operations used in Assembler Encoding Programs. To select the most effective operations, experiments in the optimization and the predator-prey problem were carried out. In the experiments, Assembler Encoding Programs equipped with different types of operations were tested. The results of the tests are presented at the end of the paper.

  11. Do European consumers use nutrition labels?

    DEFF Research Database (Denmark)

    Wills, Josephine M.; Grunert, Klaus G.; Celemín, Laura Fernández

    2009-01-01

    Nutrition labelling on food packages becomes more and more widespread in the European Union. Such information is not compulsory, unless a nutrition or health claim is made. However, how do consumers use nutrition information? Two European studies are currently assessing whether nutrition...... knowledge about nutrition and are able to use nutrition labels to identify healthier products within a category....

  12. 7 CFR 249.9 - Nutrition education.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Nutrition education. 249.9 Section 249.9 Agriculture... Nutrition education. (a) Goal. Nutrition education shall emphasize the relationship of proper nutrition to... agency shall integrate nutrition education into SFMNP operations and may satisfy nutrition education...

  13. Gas separation membrane module assembly

    Science.gov (United States)

    Wynn, Nicholas P [Palo Alto, CA; Fulton, Donald A [Fairfield, CA

    2009-03-31

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  14. Integral nuclear fuel element assembly

    International Nuclear Information System (INIS)

    Schluderberg, D. C.

    1985-01-01

    An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

  15. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

    1990-01-01

    The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

  16. Nutrition for Space Exploration

    Science.gov (United States)

    Smith, Scott M.

    2005-01-01

    Nutrition has proven to be critical throughout the history of human exploration, on both land and water. The importance of nutrition during long-duration space exploration is no different. Maintaining optimal nutritional status is critical for all bodily systems, especially in light of the fact that that many are also affected by space flight itself. Major systems of concern are bone, muscle, the cardiovascular system, the immune system, protection against radiation damage, and others. The task ahead includes defining the nutritional requirements for space travelers, ensuring adequacy of the food system, and assessing crew nutritional status before, during, and after flight. Accomplishing these tasks will provide significant contributions to ensuring crew health on long-duration missions. In addition, development and testing of nutritional countermeasures to effects of space flight is required, and assessment of the impact of other countermeasures (such as exercise and pharmaceuticals) on nutrition is also critical for maintaining overall crew health. Vitamin D stores of crew members are routinely low after long-duration space flight. This occurs even when crew members take vitamin D supplements, suggesting that vitamin D metabolism may be altered during space flight. Vitamin D is essential for efficient absorption of calcium, and has numerous other benefits for other tissues with vitamin D receptors. Protein is a macronutrient that requires additional study to define the optimal intake for space travelers. Administration of protein to bed rest subjects can effectively mitigate muscle loss associated with disuse, but too much or too little protein can also have negative effects on bone. In another bed rest study, we found that the ratio of protein to potassium was correlated with the level of bone resorption: the higher the ratio, the more bone resorption. These relationships warrant further study to optimize the beneficial effect of protein on both bone and muscle

  17. The Independent Payment Advisory Board.

    Science.gov (United States)

    Manchikanti, Laxmaiah; Falco, Frank J E; Singh, Vijay; Benyamin, Ramsin M; Hirsch, Joshua A

    2011-01-01

    The Independent Payment Advisory Board (IPAB) is a vastly powerful component of the president's health care reform law, with authority to issue recommendations to reduce the growth in Medicare spending, providing recommendations to be considered by Congress and implemented by the administration on a fast track basis. Ever since its inception, IPAB has been one of the most controversial issues of the Patient Protection and Affordable Care Act (ACA), even though the powers of IPAB are restricted and multiple sectors of health care have been protected in the law. IPAB works by recommending policies to Congress to help Medicare provide better care at a lower cost, which would include ideas on coordinating care, getting rid of waste in the system, providing incentives for best practices, and prioritizing primary care. Congress then has the power to accept or reject these recommendations. However, Congress faces extreme limitations, either to enact policies that achieve equivalent savings, or let the Secretary of Health and Human Services (HHS) follow IPAB's recommendations. IPAB has strong supporters and opponents, leading to arguments in favor of or against to the extreme of introducing legislation to repeal IPAB. The origins of IPAB are found in the ideology of the National Institute for Health and Clinical Excellence (NICE) and the impetus of exploring health care costs, even though IPAB's authority seems to be limited to Medicare only. The structure and operation of IPAB differs from Medicare and has been called the Medicare Payment Advisory Commission (MedPAC) on steroids. The board membership consists of 15 full-time members appointed by the president and confirmed by the Senate with options for recess appointments. The IPAB statute sets target growth rates for Medicare spending. The applicable percent for maximum savings appears to be 0.5% for year 2015, 1% for 2016, 1.25% for 2017, and 1.5% for 2018 and later. The IPAB Medicare proposal process involves

  18. Rocket Assembly and Checkout Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Integrates, tests, and calibrates scientific instruments flown on sounding rocket payloads. The scientific instruments are assembled on an optical bench;...

  19. Assembly of the PLT device

    International Nuclear Information System (INIS)

    Marino, R.

    1975-11-01

    The assembly of the PLT device began in June 1974 with a preassembly of the mechanical structure at a remote site. The preassembly sequence incorporated final fabrication procedures with an initial staging operation. This successful staging/fabrication procedure proved to be an invaluable asset when the final assembly was started in August 1974. The assembly continued with the initial reassembly of the previously tested structural components at the final machine site. Construction was interrupted at several points to allow for toroidal field coil, vacuum vessel, and poloidal coil installation. Two phases of toroidal field coil power tests were included in the assembly sequence prior to, and just after the vacuum vessel insertion

  20. Next-generation transcriptome assembly

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Jeffrey A.; Wang, Zhong

    2011-09-01

    Transcriptomics studies often rely on partial reference transcriptomes that fail to capture the full catalog of transcripts and their variations. Recent advances in sequencing technologies and assembly algorithms have facilitated the reconstruction of the entire transcriptome by deep RNA sequencing (RNA-seq), even without a reference genome. However, transcriptome assembly from billions of RNA-seq reads, which are often very short, poses a significant informatics challenge. This Review summarizes the recent developments in transcriptome assembly approaches - reference-based, de novo and combined strategies-along with some perspectives on transcriptome assembly in the near future.