Development of the fundamental techniques for nuclear forensics

International Nuclear Information System (INIS)

Park, Jongho; Song, Kyuseok; Ha, Younggeun; Lee, Sunyoung; Choi, Heedong

2013-08-01

The main goal of this project is to develop the fundamental techniques of physical and chemical analysis of the target materials, and data interpretation methods to identify the origin and the production attributions of intercepted illicit nuclear or radioactive materials. This also includes production of analytical data for domestic nuclear materials to be used in establishment of national nuclear material data library. As the result of the R and D of this project, we developed the analytical techniques for H and O isotopes to identify the origin of the target samples, the techniques of chemical treatments of water type and soil type samples, and the fundamental research on the gamma spectroscopy for nuclear forensics. We also performed the study on the national collaboration plan on nuclear forensics, and fundamental research and the target materials and analytical requirements for analytical data production of domestic nuclear materials to construct a national data library. Most of the R and D's in the schedule of this project have not been performed due to the early termination of the project by the decision of the government

Acoustic techniques in nuclear safeguards

International Nuclear Information System (INIS)

Olinger, C.T.; Sinha, D.N.

1995-01-01

Acoustic techniques can be employed to address many questions relevant to current nuclear technology needs. These include establishing and monitoring intrinsic tags and seals, locating holdup in areas where conventional radiation-based measurements have limited capability, process monitoring, monitoring containers for corrosion or changes in pressure, and facility design verification. These acoustics applications are in their infancy with respect to safeguards and nuclear material management, but proof-of-principle has been demonstrated in many of the areas listed

Contribution of nuclear techniques towards a sustainable agriculture

International Nuclear Information System (INIS)

Muniz Ugarte, O.

1997-01-01

The papers mentions the main nuclear techniques applied in order to achieve a sustainable agriculture, the technical support given to Cuba by the IAEA mainly in training and in the creation of a infrastructure (Laboratories) to enable the application of nuclear techniques to agricultural research related to soil fertility, plant nutrition and water usage

Recent advances in nuclear techniques for environmental radioactivity monitoring

International Nuclear Information System (INIS)

Kumar, Ajay; Tripathi, R.M.

2016-01-01

The environmental radioactivity monitoring was first started in the late 1950s following the global fallout from testing of nuclear weapons in the atmosphere. Nuclear analytical techniques are generally classified into two categories: destructive and non-destructive. Destructive techniques are carried out through several analytical methods such as α-spectrometry, liquid Scintillation counting system, solid state nuclear track detector, spectrophotometry, fluorimetry, atomic absorption spectrometry (AAS), inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma optical emission spectrometry (ICP-OES), chromatography techniques, electro-analytical techniques etc. However, nondestructive methods include gamma spectrometry, X-Ray fluorescence (XRF) spectrometry, neutron activation analysis (NAA) etc. The development of radiochemical methods and measurement techniques using alpha and gamma spectrometry have been described in brief

Nuclear forensics: strategies and analytical techniques

International Nuclear Information System (INIS)

Marin, Rafael C.; Sarkis, Jorge E.S.; Pestana, Rafael C.B.

2013-01-01

The development of nuclear forensics as a field of science arose in response to international demand for methods to investigate the illicit trafficking of nuclear materials. After being seized, unknown nuclear material is collected and analyzed by a set of analytical methods. The fingerprints of these materials can be identified and further used during the investigations. Data interpretation is an extensive process aiming to validate the hypotheses made by the experts, and can help confirm the origin of seized nuclear materials at the end of the process or investigation. This work presents the set of measures and analytical methods that have been inherited by nuclear forensics from several fields of science. The main characteristics of these methods are evaluated and the analytical techniques employed to determine the fingerprint of nuclear materials are described. (author)

Measurement of void fractions by nuclear techniques

International Nuclear Information System (INIS)

Hernandez G, A.; Vazquez G, J.; Diaz H, C.; Salinas R, G.A.

1997-01-01

In this work it is done a general analysis of those techniques used to determine void fractions and it is chosen a nuclear technique to be used in the heat transfer circuit of the Physics Department of the Basic Sciences Management. The used methods for the determination of void fractions are: radioactive absorption, acoustic techniques, average velocity measurement, electromagnetic flow measurement, optical methods, oscillating absorption, nuclear magnetic resonance, relation between pressure and flow oscillation, infrared absorption methods, sound neutron analysis. For the case of this work it will be treated about the radioactive absorption method which is based in the gamma rays absorption. (Author)

Economics on nuclear techniques application in industry

International Nuclear Information System (INIS)

Kato, Masao

1979-01-01

The economics of the application of nuclear techniques to industry is discussed. Nuclear techniques were applied to gauging (physical measurement), analysis, a radioactive tracer method, electrolytic dissociation, and radiography and were found to be very economical. They can be applied to manufacturing, mining, oceano-engineering, environmental engineering, and construction, all of which have a great influence on economics. However, because the application of a radioactive tracer technique does not have a direct influence on economics, it is difficult to estimate how beneficial it is. The cost-benefit ratio method recommended by IAEA was used for economical calculations. Examples of calculations made in gauging and analysis are given. (Ueda, J.)

Time-series-analysis techniques applied to nuclear-material accounting

International Nuclear Information System (INIS)

Pike, D.H.; Morrison, G.W.; Downing, D.J.

1982-05-01

This document is designed to introduce the reader to the applications of Time Series Analysis techniques to Nuclear Material Accountability data. Time series analysis techniques are designed to extract information from a collection of random variables ordered by time by seeking to identify any trends, patterns, or other structure in the series. Since nuclear material accountability data is a time series, one can extract more information using time series analysis techniques than by using other statistical techniques. Specifically, the objective of this document is to examine the applicability of time series analysis techniques to enhance loss detection of special nuclear materials. An introductory section examines the current industry approach which utilizes inventory differences. The error structure of inventory differences is presented. Time series analysis techniques discussed include the Shewhart Control Chart, the Cumulative Summation of Inventory Differences Statistics (CUSUM) and the Kalman Filter and Linear Smoother

Nuclear analysis techniques as a component of thermoluminescence dating

Energy Technology Data Exchange (ETDEWEB)

Prescott, J R; Hutton, J T; Habermehl, M A [Adelaide Univ., SA (Australia); Van Moort, J [Tasmania Univ., Sandy Bay, TAS (Australia)

1997-12-31

In luminescence dating, an age is found by first measuring dose accumulated since the event being dated, then dividing by the annual dose rate. Analyses of minor and trace elements performed by nuclear techniques have long formed an essential component of dating. Results from some Australian sites are reported to illustrate the application of nuclear techniques of analysis in this context. In particular, a variety of methods for finding dose rates are compared, an example of a site where radioactive disequilibrium is significant and a brief summary is given of a problem which was not resolved by nuclear techniques. 5 refs., 2 tabs.

Nuclear analysis techniques as a component of thermoluminescence dating

Energy Technology Data Exchange (ETDEWEB)

Prescott, J.R.; Hutton, J.T.; Habermehl, M.A. [Adelaide Univ., SA (Australia); Van Moort, J. [Tasmania Univ., Sandy Bay, TAS (Australia)

1996-12-31

In luminescence dating, an age is found by first measuring dose accumulated since the event being dated, then dividing by the annual dose rate. Analyses of minor and trace elements performed by nuclear techniques have long formed an essential component of dating. Results from some Australian sites are reported to illustrate the application of nuclear techniques of analysis in this context. In particular, a variety of methods for finding dose rates are compared, an example of a site where radioactive disequilibrium is significant and a brief summary is given of a problem which was not resolved by nuclear techniques. 5 refs., 2 tabs.

Nuclear analytical techniques in medicine

International Nuclear Information System (INIS)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future

Nuclear techniques in food production

International Nuclear Information System (INIS)

Merlin, J.P.C.

1975-01-01

This study is divided into three parts. The first, devoted to the use of radiations in food production, deals especially with artificial mutagenesis, selectors taking advantage of altered hereditary features in plants from irradiated seed; sterilization of animals to eliminate harmful insects (male sterilization technique); the lethal power of radiations used for the production of animal vaccins, attenuated by irradiation, against organisms which infest or degrade food products. Part two shows that radioactive atoms used as tracers to reveal migrations and chemical transformations of products such as fertilizers and pesticides can speed up all kinds of agronomical research. Their possibilities in research on animal feeding and to detect poisonous substances in foodstuffs are also mentioned. The last part is devoted to the use of nuclear techniques in irrigation and more precisely in the study of underground water flows soil moisture and lastly the future of nuclear desalination [fr

Nuclear analytical techniques in medicine

Energy Technology Data Exchange (ETDEWEB)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future.

Use of nuclear techniques in biological control

International Nuclear Information System (INIS)

Greany, Patrick D.; Carpenter, James E.

2000-01-01

As pointed out by Benbrook (1996), pest management is at a crossroads, and there is a great need for new, biointensive pest management strategies. Among these approaches, biological control is a keystone. However, because of increasing concerns about the introduction of exotic natural enemies of insect pests and weeds (Howarth 1991, Delfosse 1997), the overall thrust of biological control has moved toward augmentative biological control, involving releases of established natural enemy species (Knipling 1992). This in turn has created a need to develop more cost-effective mass rearing technologies for beneficial insects. Nuclear techniques could play an especially important role in augmentative biological control, not only in facilitating mass rearing, but in several other ways, as indicated below. Recognising the potential value for use of nuclear techniques in biological control, the Insect and Pest Control Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, sponsored a Consultants' Group Meeting on this subject in April 1997. The Group produced a document entitled Use of Nuclear Techniques in Biological Control: Managing Pests, Facilitating Trade and Protecting the Environment. The consultants included the authors of this paper as well as Ernest Delfosse (at that time, with the USDA-APHIS National Biological Control Institute), Garry Hill (Intl. Institute for Biological Control), Sinthya Penn (Beneficial Insectary), and Felipe Jeronimo (USDA-APHIS PPQ, Guatemala). The remarks presented in this paper reflect the thoughts presented by these consultants and other participants at the IAEA-sponsored meeting. Several potential uses for nuclear techniques were identified by the Consultants' Group, including: 1) improvements in rearing media (either artificial diets or natural hosts/prey), 2) provision of sterilised natural prey to be used as food during shipment, to ameliorate concerns relating to the

Techniques and methods in nuclear materials traceability

International Nuclear Information System (INIS)

Persiani, P.J.

1996-01-01

The nonproliferation community is currently addressing concerns that the access to special nuclear materials may increase the illicit trafficking in weapons-usable materials from civil and/or weapons material stores and/or fuel cycles systems. Illicit nuclear traffic usually involves reduced quantities of nuclear materials perhaps as samplings of a potential protracted diversionary flow from sources to users. To counter illicit nuclear transactions requires the development of techniques and methods in nuclear material traceability as an important phase of a broad forensic analysis capability. This report discusses how isotopic signatures and correlation methods were applied to determine the origins of Highly Enriched Uranium (HEU) and Plutonium samples reported as illicit trafficking in nuclear materials

Introduction to nuclear techniques in agronomy and plant biology

International Nuclear Information System (INIS)

Vose, P.B.

1980-01-01

The subject is covered in chapters, entitled: nature of isotopes and radiation; nuclear reactions; working with radioisotopes; detection systems and instrumentation; radioassay; radioisotopes and tracer principles; stable isotopes as tracers - mainly the use of 15 N; activation analysis for biological samples; x-ray fluorescence spectrography for plants and soils; autoradiography; isotopes in soils studies; isotopic tracers in field experimentation; nuclear techniques in plant science; nuclear techniques for soil water; radiation and other induced mutation in plant breeding. (author)

Technical and economic benefits of nuclear techniques in ore processing

International Nuclear Information System (INIS)

1989-08-01

This report is the outcome of an Advisory Group Meeting organized by the Agency and hosted by the Institute of Physics and Nuclear Techniques, the Academy of Mining and Metallurgy in Krakow, Poland. The purpose of the meeting was to assess the technical and economic benefits of applying nuclear techniques in ore processing industry. Nucleonic control systems and nuclear on-line analytical techniques as well as radioisotope tracer tests and their applications in metallic ore-processing, coal production, and cement fabrication were discussed. This report contains a summary and the presentations dealing with nuclear techniques for process control made at this meeting. Using a number of case-histories as examples, it illustrates technical and economic benefits obtainable by the installation of nuclear process control instrumentation. It is expected to be useful for everybody dealing with ore and coal production, but especially for administrative personnel and engineers who plan and implement national development programmes related to mineral resources. Refs, figs and tabs

Gas separation techniques in nuclear facilities

International Nuclear Information System (INIS)

Hioki, Hideaki; Morisue, Tetsuo; Ohno, Masayoshi

1983-01-01

The literatures concerning the gas separation techniques which are applied to the waste gases generated from nuclear power plants and nuclear fuel reprocessing plants, uranium enrichment and the instrumentation of nuclear facilities are reviewed. The gas permeability and gas separation performance of membranes are discussed in terms of rare gas separation. The investigation into the change of the gas permeability and mechanical properties of membranes with exposure to radiation is reported. The theoretical investigation of the separating cells used for the separation of rare gas and the development of various separating cells are described, and the theoretical and experimental investigations concerning rare gas separation using cascades are described. The application of membrane method to nuclear facilities is explained showing the examples of uranium enrichment, the treatment of waste gases from nuclear reactor buildings and nuclear fuel reprocessing plants, the monitoring of low level β-emitters in stacks, the detection of failed fuels and the detection of water leak in fast breeder reactors. (Yoshitake, I.)

Cuban agriculture and nuclear techniques

International Nuclear Information System (INIS)

Labrada Remon, A.; Perez Talavera, S.

1997-01-01

The application of nuclear techniques to agriculture emerged in Cuba at the end of the 60s. At the beginning only few researchers used these techniques for stimulating or mutational purposes. At the end of the 80 s systematic research began for its possible application to existing agricultural problems among which we can highlight radiomutable genesis and the determination of diagnostic damage of seeds by x-rays, plant nutrition and soil fertility, efficient water use, animal nutrition, reproduction and health as well as pest control

Scintigraphic instruments and techniques in nuclear medicine

International Nuclear Information System (INIS)

Bornand, B.; Soussaline, F.

1977-03-01

The development of new radiopharmaceuticals, cyclotron-produced radionuclides and improvement of detector, scanner and gamma camera characteristics have enable a remarkable recent progress in scintigraphic techniques for organ visualization and functional studies. Using a variety of techniques, positron cameras, section scanners, gamma holography, tomographic imaging appear to be playing an increasing important role. Data processing techniques, for example image processing and three dimensional reconstruction have significantly increased their impact. The principal research work and advances in technique achieved up to 1972 are summarized and the subjects which have been further exploited are outlined. The main section comprises references and abstracts of articles from scientific journals and conference proceedings (191 articles and 221 papers mentioned) for the period 1972-1975 to illustrate advances in this domain: Excerpta Medica (Nuclear Medicine) Abstract Journals and Nuclear Science Abstracts (1972-1975) were used as abstracting publications. This survey is completed with an index of authors and subject-matters. Eleven thesis are mentionned in an appendix [fr

Nuclear techniques used in agricultural research in Turkey

International Nuclear Information System (INIS)

Halitligil, M.B.

1999-01-01

Nuclear techniques that are in use in agricultural research in Turkey are : a.) techniques for monitoring and assessing the environmental pollution - such as monitoring the pesticides residues in food and soil using 14 C labelled pesticide's ; also plant root investigations using 32 P; b.) techniques for reducing the impact of increased plant productivity - such as the use of N tagged chemicals for optimizing the N fertilizer use and to determine the N 2 - fixation capacities of legumes. Also improving the water management practices - such as the determination of soil water , soil moisture characteristic cures and the leaching in soils by using the neutron probe; c.) techniques for agricultural resource development - such as the use of 60 Co and 137 Cs for obtaining new genotypes. The benefits and disadvantages of the application of nuclear techniques in agricultural research will be reviewed

Technique of nuclear reactors controls

International Nuclear Information System (INIS)

Weill, J.

1953-12-01

This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [fr

Achievements obtained in agricultural research by using nuclear techniques in Turkey

International Nuclear Information System (INIS)

Halitligil, M. B.

2002-01-01

Ankara Nuclear Research Center in Agriculture and Animal Sciences (ANRCAAS) is one of the four unique research centers belonging to Turkish Atomic Energy Authority. ANRCAAS is unique because it is the only center in Turkey which uses nuclear techniques as a tool to solve problems for agriculture or animal sciences which cannot be solved using conventional techniques. Training and Research in the areas of agriculture, animal science, food preservation and sterilization via nuclear techniques are among the objectives of the Center. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties of Plant Breeding, Soil Fertility and Plant Nutrition, Plant Protection and Pesticide Residues -all by using nuclear techniques- are provided

Nuclear techniques and professional education at InSTEC

International Nuclear Information System (INIS)

Díaz Rizo, Oscar; D’Alessandro Rodríguez, Katia; Gelen Rudnikas, Alina; López Pino, Neivy; Borroto Portela, Jorge; Domínguez Catasús, Judith; Abreu Díaz, Aida M.

2015-01-01

The paper includes the most relevant results obtained by InSTEC´s Group of Nuclear Applications in the last 25 years, in the development of nuclear techniques and its application in different social areas. The impact of applied research on graduated and post graduated education in nuclear careers as well as the social recognition of the university community are presented. (author)

A fermionic molecular dynamics technique to model nuclear matter

International Nuclear Information System (INIS)

Vantournhout, K.; Jachowicz, N.; Ryckebusch, J.

2009-01-01

Full text: At sub-nuclear densities of about 10 14 g/cm 3 , nuclear matter arranges itself in a variety of complex shapes. This can be the case in the crust of neutron stars and in core-collapse supernovae. These slab like and rod like structures, designated as nuclear pasta, have been modelled with classical molecular dynamics techniques. We present a technique, based on fermionic molecular dynamics, to model nuclear matter at sub-nuclear densities in a semi classical framework. The dynamical evolution of an antisymmetric ground state is described making the assumption of periodic boundary conditions. Adding the concepts of antisymmetry, spin and probability distributions to classical molecular dynamics, brings the dynamical description of nuclear matter to a quantum mechanical level. Applications of this model vary from investigation of macroscopic observables and the equation of state to the study of fundamental interactions on the microscopic structure of the matter. (author)

Nuclear measurements, techniques and instrumentation industrial applications plasma physics and nuclear fusion. 1980-1994. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1995-04-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques and Instrumentation, with Industrial Applications (of Nuclear Physics and Engineering), and with Plasma Physics and Nuclear Fusion, issued during the period 1980-1994. Most publications are in English. Proceedings of conferences, symposia, and panels of experts may contain some papers in other languages (French, Russian, or Spanish), but all papers have abstracts in English. Price quotes are in Austrian Schillings, do not include local taxes, and are subject to change without notice. Contents cover the three main categories of (i) Nuclear Measurements, Techniques and Instrumentation (Physics, Chemistry, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactors and Particle Accelerator Applications, Nuclear Data); (ii) Industrial Applications (Radiation Processing, Radiometry, Tracers); and (iii) Plasma Physics and Nuclear Fusion

Nuclear measurements, techniques and instrumentation industrial applications plasma physics and nuclear fusion, 1980-1993. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1994-01-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques and Instrumentation, with Industrial Applications (of Nuclear Physics and Engineering), and with Plasma Physics and Nuclear Fusion, issued during the period 1980-1993. Most publications are in English. Proceedings of conferences, symposia, and panels of experts may contain some papers in other languages (French, Russian, or Spanish), but all papers have abstracts in English. Price quotes are in Austrian Schillings, do not include local taxes, and are subject to change without notice. Contents cover the three main categories of (I) Nuclear Measurements, Techniques and Instrumentation (Physics, Chemistry, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactors and Particle Accelerator Applications, Nuclear Data); (ii) Industrial Applications (Radiation Processing, Radiometry, Tracers); and (iii) Plasma Physics and Nuclear Fusion

Tracer techniques in estimating nuclear materials holdup

International Nuclear Information System (INIS)

Pillay, K.K.S.

1987-01-01

Residual inventory of nuclear materials remaining in processing facilities (holdup) is recognized as an insidious problem for safety of plant operations and safeguarding of special nuclear materials (SNM). This paper reports on an experimental study where a well-known method of radioanalytical chemistry, namely tracer technique, was successfully used to improve nondestructive measurements of holdup of nuclear materials in a variety of plant equipment. Such controlled measurements can improve the sensitivity of measurements of residual inventories of nuclear materials in process equipment by several orders of magnitude and the good quality data obtained lend themselves to developing mathematical models of holdup of SNM during stable plant operations

Nuclear techniques in agriculture in the Philippines

International Nuclear Information System (INIS)

Medina, F.I.S. III; Medina, V.F.O.

1994-01-01

Nuclear techniques, both isotopic tracers and radiation have been utilized in the Philippine agricultural research and development to improve food production, reduce food losses and protect the environment. The Philippine Nuclear Research Institute (PNRI), a government agency has been mandated to promote the peaceful application of nuclear energy to accelerate national development. It takes the lead role in nuclear assisted agricultural research and development and has adopted a two-pronged approach for food and agricultural R and D by increasing productivity through crop improvement by mutation breeding, soil management and fertilizer uptake studies, livestock improvement; and reducing losses by pest control and food irradiation

Innovative health solutions using nuclear techniques

International Nuclear Information System (INIS)

Bailey, Dale

2013-01-01

Australian nuclear medicine is currently amongst the highest standard of anywhere in the world. Its origins here are firmly entrenched in Internal Medicine, with its emphasis on physiology and function, unlike many other countries such as the USA where a Radiology orientation dominates. In addition, Australia has been well served by extremely competent and innovative physical scientists working in universities, government research facilities (e.g., AAEC, ANSTO) and tertiary referral hospitals who have established their main affiliations as being within the highly multidisciplinary nuclear medicine community. Nuclear medicine in the past 10-15 years has experienced a massive shift towards 'hybrid' imaging - where two (or more) complementary imaging modalities, such as X-ray CT and a Positron Emission Tomography (PET) or Single Photon Emission Computed Tomography (SPECT) scanner, are combined into a functionally single device which provides high resolution spatial anatomical (form, or structure) and radionuclide distribution (function) images. In addition, the nuclear imaging techniques maintain their quantitative characteristics and thus combined structure-function imaging results in a significant improvement in diagnostic capability - looking beyond simple forms to quantifying degree of disease, e.g., malignancy of a cancer. Recently, PET scanners have been combined with NMR Imaging (MRI) and these will provide new areas of application, especially in magnetic resonance spectroscopy and radionuclide imaging. The techniques are extremely valuable in monitoring response to treatment, allowing treatments to be changed if proving ineffective. In addition, new techniques are emerging using radionuclides for therapy, combined with the improvements in imaging. This permits exquisite targeting and optimal patient selection. This talk will highlight a number of these achievements and ask the question as to what is holding back developments in Australia at present.

Nuclear measurements, techniques and instrumentation, industrial applications, plasma physics and nuclear fusion 1986-1996. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1997-03-01

This catalogue lists all sales publications of the International Atomic Energy Agency dealing with Nuclear Measurements, Techniques, and Instrumentation, Industrial Applications, Plasma Physics and Nuclear Fusion, issued during the period 1986-1996. Most publications are in English. Proceedings of conferences, symposia and panels of experts may contain some papers in languages other than English (French, Russian or Spanish), but all of these papers have abstracts in English. Contents cover the three main areas of (i) Nuclear Measurements, Techniques and Instrumentation (Physics, Dosimetry Techniques, Nuclear Analytical Techniques, Research Reactor and Particle Accelerator Applications, and Nuclear Data), (ii) Industrial Applications (Radiation Processing, Radiometry, and Tracers), and (iii) Plasma Physics and Controlled Thermonuclear Fusion

Nuclear analysis techniques and environmental sciences

International Nuclear Information System (INIS)

1997-10-01

31 theses are collected in this book. It introduced molecular activation analysis micro-PIXE and micro-probe analysis, x-ray fluorescence analysis and accelerator mass spectrometry. The applications about these nuclear analysis techniques are presented and reviewed for environmental sciences

Nuclear techniques using radioactive beams for biophysical studies

CERN Document Server

Stachura, Monika Kinga

Perturbed angular correlation of "-rays (PAC) spectroscopy and nuclear magnetic resonance measured by !-decay (betaNMR) spectroscopy are two very sensitive and, among life-scientists, infrequently encountered nuclear techniques. Both of them belong to the family of hyperfine techniques, which allow for measurements of the interactions of extra-nuclear electromagnetic fields with the nuclear moments. In this way - they can provide useful information about the local structure of the investigated systems. The first part of the work presented here focuses on investigating the fundamental chemistry of heavy metal ion - protein interactions mainly with PAC spectroscopy. A variety of questions concerning both the function of metal ions in natural systems and in synthetic biomolecules on the one hand and the toxic effects of some metal ions on the other were addressed, the results of which are described in four different papers. Paper I is a review article entitled ”Selected applications of perturbed angular correl...

10th Australian conference on nuclear techniques of analysis. Proceedings

International Nuclear Information System (INIS)

1998-01-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume

10th Australian conference on nuclear techniques of analysis. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

These proceedings contains abstracts and extended abstracts of 80 lectures and posters presented at the 10th Australian conference on nuclear techniques of analysis hosted by the Australian National University in Canberra, Australia from 24-26 of November 1997. The conference was divided into sessions on the following topics : ion beam analysis and its applications; surface science; novel nuclear techniques of analysis, characterization of thin films, electronic and optoelectronic material formed by ion implantation, nanometre science and technology, plasma science and technology. A special session was dedicated to new nuclear techniques of analysis, future trends and developments. Separate abstracts were prepared for the individual presentation included in this volume.

Hyperfine interactions measured by nuclear orientation technique

International Nuclear Information System (INIS)

Brenier, R.

1982-01-01

This report concerns the use of hyperfine interaction to magnetism measurements and to the determination of the nuclear structure of Terbium isotopes by the low temperature nuclear orientation technique. In the first part we show that the rhodium atom does not support any localized moment in the chromium matrix. The hyperfine magnetic field at the rhodium nuclear site follows the Overhauser distribution, and the external applied magnetic field supports a negative Knight shift of 16%. In the second part we consider the structure of neutron deficient Terbium isotopes. We introduce a coherent way of evaluation and elaborate a new nuclear thermometer. The magnetic moments allows to strike on the studied states configuration. The analysis of our results shows a decrease of the nuclear deformation for the lighter isotopes [fr

Industrial application of nuclear techniques in Australia

International Nuclear Information System (INIS)

Easey, J.F.

1981-01-01

The applications of nuclear techniques in Australia was reviewed - the work has been to aid: mining and mineral sector, the manufacturing, chemical and petroleum industries, hydrology and sedimentology

Improved biomass utilization through the use of nuclear techniques

International Nuclear Information System (INIS)

1988-10-01

Biomass is a major by-product resource of agriculture and food manufacturing, but it is under-utilized as a source of food, fibre, and chemicals. Nuclear techniques provide unique tools for studies of the capabilities of micro-organisms in methane digestor operation and in the transformation of lignocellulosic materials to useful products. Nuclear techniques have also been effectively employed as mutagenic agents in the preparation of more efficient microbial strains for the conversion of biomass. This report reviews the variety and diversity of such applications with focus on the development of microbial processes to utilize agricultural wastes and by-products. The value of nuclear techniques is manifestly demonstrated in the production of efficient microbial mutant strains, in the tracing of metabolic pathways, in the monitoring of lignin degradation and also of fermenter operation. Refs, figs and tabs

Several problems and their countermeasures of recent developments in nuclear techniques in China

International Nuclear Information System (INIS)

Xia Yuanfu

1993-01-01

The nuclear technique that is developing at top speed in China is introduced. Several characteristics of recent international developments in nuclear techniques are discussed and a precise classification is suggested. Particularly the present problems and their countermeasures of recent developments in nuclear techniques in China are explored

Nuclear techniques of analysis in diamond synthesis and annealing

Energy Technology Data Exchange (ETDEWEB)

Jamieson, D. N.; Prawer, S.; Gonon, P.; Walker, R.; Dooley, S.; Bettiol, A.; Pearce, J. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1996-12-31

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs.

Nuclear techniques of analysis in diamond synthesis and annealing

Energy Technology Data Exchange (ETDEWEB)

Jamieson, D N; Prawer, S; Gonon, P; Walker, R; Dooley, S; Bettiol, A; Pearce, J [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-12-31

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs.

Nuclear techniques of analysis in diamond synthesis and annealing

International Nuclear Information System (INIS)

Jamieson, D. N.; Prawer, S.; Gonon, P.; Walker, R.; Dooley, S.; Bettiol, A.; Pearce, J.

1996-01-01

Nuclear techniques of analysis have played an important role in the study of synthetic and laser annealed diamond. These measurements have mainly used ion beam analysis with a focused MeV ion beam in a nuclear microprobe system. A variety of techniques have been employed. One of the most important is nuclear elastic scattering, sometimes called non-Rutherford scattering, which has been used to accurately characterise diamond films for thickness and composition. This is possible by the use of a database of measured scattering cross sections. Recently, this work has been extended and nuclear elastic scattering cross sections for both natural boron isotopes have been measured. For radiation damaged diamond, a focused laser annealing scheme has been developed which produces near complete regrowth of MeV phosphorus implanted diamonds. In the laser annealed regions, proton induced x-ray emission has been used to show that 50 % of the P atoms occupy lattice sites. This opens the way to produce n-type diamond for microelectronic device applications. All these analytical applications utilize a focused MeV microbeam which is ideally suited for diamond analysis. This presentation reviews these applications, as well as the technology of nuclear techniques of analysis for diamond with a focused beam. 9 refs., 6 figs

Toshiba's developments on construction techniques of nuclear power plants

International Nuclear Information System (INIS)

Hayashi, Y.; Itoh, N.

1987-01-01

Reliable and economic energy supplies are fundamental requirements of energy policies in Japan. To accomplish these needs, nuclear power plants are being increased in Japan. In recent years, construction cost increases and schedule extensions have affected the capital cost of nuclear energy, compared with fossil power plants, due to lower costs of oil and coal. On the other hand, several severe regulations have been applied to nuclear power plant designs. High-quality and cooperative engineering and harmonized design of equipment and parts are strongly required. Therefore, reduced construction costs and scheduling, as well as higher quality and reliability, are the most important items for nuclear industry. Toshiba has developed new construction techniques, as well as design and engineering tools for control and management, that demonstrate the positive results achieved in the shorter construction period of 1100-MW(electric) nuclear power plants. The normal construction period so far is 64 months, whereas the current construction period is 52 months. (New construction techniques are partially applied). In future years, the construction period will be lowered to 48 months. (New construction techniques are fully applied). A construction period is defined as time from the start of rock inspection to the start of commercial operation

Techniques used for charged particle nuclear data evaluation at CNDC

International Nuclear Information System (INIS)

Zhuang Youxiang; Sun Zuxun

1993-01-01

The methods and techniques used for Charged Particle Nuclear Data (CPND) evaluation at Chinese Nuclear Data Center (CNDC) are summarized, including compilation and evaluation of experimental data, nuclear reaction theory and model calculation, systematics research and comprehensive recommendation etc

Nuclear techniques in animal agriculture

International Nuclear Information System (INIS)

Young, B.A.

1981-01-01

Nuclear technology plays an integral part in research to improve the health and productivity of animals. The use of radioisotopes and ionizing radiations in animal agriculture is briefly reviewed. The radioimmunoassay techniques give the opportunity of measuring and following precisely hormonal patterns in animals over the reproductive cycle. Simply by analysing a sample of blood, milk, or other body fluid, minute hormone concentrations can be assayed and the reproductive status of the animal assessed. The radioimmunoassay procedure uses antigens which are isotopically labelled, usually with 125 I, and antibodies specifically developed for each hormone. The onset of sexual maturity, of oestrus, or the influence of environmental, nutritional or other factors on the reproductive state of an animal can be studied. An example of the use of the radioimmunoassay technique is illustrated in the coordinated research program of the IAEA which focuses on improving domestic buffalo production. Nuclear techniques, particularly the use of stable and radioactive tracers are providing important insights into the functioning of the digestive system of ruminants, its qualitative dynamics and metabolism. For assessing the products of the rumen, particularly volatile fatty acids which become an energy source, and microbial proteins which become a protein source for the animal, materials labelled with 14 C, 3 H, 35 S, 15 N and 32 P are used. As an illustrative example, the results of one study of nitrogen metabolism, microbial protein and rumen bypass protein synthesis in cattle are shown

Applications of nuclear techniques and research 1990

International Nuclear Information System (INIS)

1990-01-01

The application of nuclear techniques, i.e. those techniques where use is made of isotopes and radiation, continues to contribute to progress in science, technology, agriculture, industry and medicine. Nuclear applications found their way into the IAEA's activities from the very beginning, and their promotion constitutes today a substantial fraction of the IAEA's Technical Co-operation and Research Contract Programmes. The 1990 selection is opened by a review of the role and function of the IAEA's Research Contract Programme, which is one of the Agency's most effective tools for promoting and developing nuclear applications. Applications in agriculture are covered in two articles dealing respectively with issues affecting the acceptance of food irradiation by governments, the food industry and consumers and with the use of radiation to induce plant mutation, a practical tool available to plant breeders in their effort to develop better quality crops. The following article deals with a typical nuclear application in medicine, i.e. the use of radionuclides in the diagnosis of lung diseases and in investigations related to the respiratory function. The use of environmental isotopes to assess the energy potential of geothermal fields is the next subject, a good example of nuclear methods applied to the evaluation of natural resources. The 1990 review concludes with a presentation prepared by the Third World Academy of Sciences on magnetic fusion research activity in the developing countries and its connection with the IAEA's own fusion programme

Nuclear techniques for bulk and surface analysis of materials

International Nuclear Information System (INIS)

D'Agostino, M.D.; Kamykowski, E.A.; Kuehne, F.J.; Padawer, G.M.; Schneid, E.J.; Schulte, R.L.; Stauber, M.C.; Swanson, F.R.

1978-01-01

A review is presented summarizing several nondestructive bulk and surface analysis nuclear techniques developed in the Grumman Research Laboratories. Bulk analysis techniques include 14-MeV-neutron activation analysis and accelerator-based neutron radiography. The surface analysis techniques include resonant and non-resonant nuclear microprobes for the depth profile analysis of light elements (H, He, Li, Be, C, N, O and F) in the surface of materials. Emphasis is placed on the description and discussion of the unique nuclear microprobe analytical capacibilities of immediate importance to a number of current problems facing materials specialists. The resolution and contrast of neutron radiography was illustrated with an operating heat pipe system. The figure shows that the neutron radiograph has a resolution of better than 0.04 cm with sufficient contrast to indicate Freon 21 on the inner capillaries of the heat pipe and pooling of the liquid at the bottom. (T.G.)

Proceedings of firsts workshop on Nuclear and related techniques in health

International Nuclear Information System (INIS)

1997-01-01

The book presents papers submitted to the first Workshop on Nuclear and related techniques in health that was holder at the first International Symposium on Nuclear and Related Techniques in Agriculture, held in Havana, Cuba, on October 28 th and 30 th, 1997

Improving animal productivity by nuclear techniques

International Nuclear Information System (INIS)

Garcia, M.; Jayasuriya, M.C.N.; Perera, B.M.A.O.

1995-01-01

The IAEA and FAO have run a joint programme for 30 years to assist national agricultural research systems in member states to develop, test and apply nuclear and related techniques for improving the productivity of livestock. Applications of nuclear technologies for improving livestock productivity include: use of radioimmunoassay in animal nutrition researches, animal production, and evaluating feeding and management systems through reproductive performance in a field. Geographic coverage and the type of livestock studies are: grazing animals (cattle, goats and sheep) in Africa, Latin America and Asia, as well as buffalo production in Asia. 6 refs, 8 figs, 6 tabs

Development of indigenous technology at CNEN in the fields of nuclear medicine, nuclear detectors, instrumentation, radioisotope production and application of nuclear techniques

International Nuclear Information System (INIS)

Mafra, O.

1990-01-01

The main objectives of the program developed at CNEN in the field of nuclear medicine, nuclear detectors, instrumentation, radioisotope production and application of nuclear technique are described. (E.G.) [pt

On-line Monitoring and Calibration Techniques in Nuclear Power Plants

International Nuclear Information System (INIS)

Hashemian, H.M.

2011-01-01

Years of research, testing and experience in the field of sensor diagnostics have yielded many technologies which offer financial as well as operational benefits to the nuclear industry. Among these technologies are On-Line Monitoring (OLM) and On-Line Calibration of critical process monitoring sensors such as resistance temperature detectors (RTD), thermocouples, and pressure transmitters to name a few. The remote access and verification of these sensors have been shown to limit the exposure of maintenance personnel to harsh environments while at the same time effectively and efficiently diagnosing the health and performance of these sensors. In addition to sensors, technologies exist in determining not only the health of instrumentation and control (I and C) cabling that carries the signals from these sensors, but also these same cable testing techniques can be used in the remote evaluation of many end devices used in safety related operations as well. Given these advances in sensor system monitoring techniques it would seem to follow that nuclear utilities from around the world would be applying these tried and true techniques to optimize up time and to provide additional confidence in the output of processing sensors. However, although several of the world's regulatory bodies have approved of the concept of these techniques, few utilities have undertaken to fully embrace on-line monitoring and on-line calibration of nuclear process sensors. In the United States efforts are now underway, with representatives of the U.S. nuclear industry and nuclear power plant vendors to obtain generic NRC licensing for the use of OLM in nuclear power plants. If approved, generic licensing will help pave the way toward greater implementation of OLM and its related calibration techniques. (author)

Industrial applications of radioisotopes: techniques and procedures of (NTIS) Nuclear Techniques Industrial Service

International Nuclear Information System (INIS)

Smith, S.W.; Kruger, J.

1985-06-01

Radioisotope handling procedures followed by personnel of the Nuclear Techniques Industrial Service (NTIS) during the conduction of investigations in industry are described. Possible radiological implications as a result of the various measuring techniques and different types of plants are discussed. Conditions under which permanent authorization has been granted for the use of radioisotopes are mentioned

Conference on Techniques of Nuclear and Conventional Analysis and Applications

International Nuclear Information System (INIS)

2012-01-01

Full text : With their wide scope, particularly in the areas of environment, geology, mining, industry and life sciences; analysis techniques are of great importance in research as fundamental and applied. The Conference on Techniques for Nuclear and Conventional Analysis and Applications (TANCA) are Registered in the national strategy of opening of the University and national research centers on their local, national and international levels. This conference aims to: Promoting nuclear and conventional analytical techniques; Contribute to the creation of synergy between the different players involved in these techniques include, Universities, Research Organizations, Regulatory Authorities, Economic Operators, NGOs and others; Inform and educate potential users of the performance of these techniques; Strengthen exchanges and links between researchers, industry and policy makers; Implement a program of inter-laboratory comparison between Moroccan one hand, and their foreign counterparts on the other; Contribute to the research training of doctoral students and postdoctoral scholars. Given the relevance and importance of the issues related to environment and impact on cultural heritage, this fourth edition of TANCA is devoted to the application of analytical techniques for conventional and nuclear Questions ied to environment and its impact on cultural heritage.

Nuclear techniques used in soil fertility and plant nutrition

International Nuclear Information System (INIS)

Halitligil, M.B.; Kislal, H.; Sirin, H.; Sirin, C.; Kilicaslan, A.

2004-01-01

Full text: Nuclear techniques, which include the usage of radioactive and stable isotopes, had been used in soil fertility, plant nutrition, plant breeding, plant protection and food preservation research works after 1950s. Ultimately these nuclear techniques contributed greatly in increased plant production. In general, it is possible to separate the nuclear techniques used in soil fertility and plant nutrition into two groups. The first group is the use of radioactive and stable isotopes as a tracer in order to find out the optimum fertilization rate of plants precisely. The second group is the use of neutron probe in determining the soil moisture at different periods of the growing season and at various soil depths precisely without any difficulty. In research works where conventional techniques are used, it is not possible to identify how much of the nutrient taken up by the plant came from applied fertilizer or soil. However, when tracer techniques are used in research works it is possible to identify precisely which amount of the nutrient taken from fertilizer or from soil. Therefore, the nuclear techniques are very important in finding out which variety of fertilizer and how much of it must be used. The determination of the soil moisture is very important in finding the water needs of the plants for a good growth. Soil moisture contents changes often during the growth period, so it must be determined very frequently in order to determine the amount of irrigation that has to be done. Conventional soil moisture determination (gravimetric method) is very laborious especially when it has to be done frequently. However, by using neutron probe soil moisture determinations can be done very easily any time during the plant growth period

Nuclear techniques used in soil fertility and plant nutrition

International Nuclear Information System (INIS)

Halitligil, M.B.

2004-01-01

Nuclear techniques, which include the usage of radioactive and stable isotopes, had been used in soil fertility, plant nutrition, plant breeding, plant protection and food preservation research works after 1950s. Ultimately these nuclear techniques contributed greatly in increased plant production. In general, it is possible to separate the nuclear techniques used in soil fertility and plant nutrition into two groups. The first group is the use of radioactive and stable isotopes as a tracer in order to find out the optimum fertilization rate of plants precisely. The second group is the use of neutron probe in determining the soil moisture at different periods of the growing season and at various soil depths precisely without any difficulty. In research works where conventional techniques are used, it is not possible to identify how much of the nutrient taken up by the plant came from applied fertilizer or soil. However, when tracer techniques are used in research works it is possible to identify precisely which amount of the nutrient taken from fertilizer or from soil. Therefore, the nuclear techniques are very important in finding out which variety of fertilizer and how much of it must be used. The determination of the soil moisture is very important in finding the water needs of the plants for a good growth. Soil moisture contents changes often during the growth period, so it must be determined very frequently in order to determine the amount of irrigation that has to be done. Conventional soil moisture determination (gravimetric method) is very laborious especially when it has to be done frequently. However, by using neutron probe soil moisture determinations can be done very easily any time during the plant growth period. (author)

Application status of on-line nuclear techniques in analysis of coal quality

International Nuclear Information System (INIS)

Cai Shaohui

1993-01-01

Nuclear techniques are favourable for continuous on-line analysis, because they are fast, non-intrusive. They can be used in the adverse circumstances in coal industry. The paper reviews the application status of on-line nuclear techniques in analysis of coal quality and economic benefits derived from such techniques in developed countries

Nuclear activation techniques in the life sciences

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-08-15

The analysis of the elemental composition of biological materials is presently undertaken on a large scale in many countries around the world One recent estimate puts the number of such analyses at six thousand million single-element determinations per year, of which about sixteen million are for the so-called trace elements. Since many of these elements are known to play an important role in relation to health and disease, there is considerable interest in learning more about the ways in which they function in living organisms. Nuclear activation techniques, generally referred to collectively as 'activation analysis' constitute an important group of methods for the analysis of the elemental composition of biological materials. Generally they rely on the use of a research nuclear reactor as a source of neutrons for bombarding small samples of biological material, followed by a measurement of the induced radioactivity to provide an estimate of the concentrations of elements. Other methods of activation with Bremsstrahlung and charged particles may also be used, and have their own special applications. These methods of in vitro analysis are particularly suitable for the study of trace elements. Another important group of methods makes use of neutrons from isotopic neutron sources or neutron generators to activate the whole body, or a part of the body, of a living patient. They are generally used for the study of major elements such as Ca, Na and N. All these techniques have previously been the subject of two symposia organised by the IAEA in 1967 and 1972. The present meeting was held to review some of the more recent developments in this field and also to provide a viewpoint on the current status of nuclear activation techniques vis-a-vis other competing non-nuclear methods of analysis.

NST and NST integration: nuclear science and technique and nano science and technique

International Nuclear Information System (INIS)

Zhao Yuliang; Chai Zhifang; Liu Yuanfang

2008-01-01

Nuclear science is considered as a big science and also the frontier in the 20 th century, it developed many big scientific facilities and many technique platforms (e.g., nuclear reactor, synchrotron radiation, accelerator, etc.) Nuclear Science and Technology (NST) provide us with many unique tools such as neutron beams, electron beams, gamma rays, alpha rays, beta rays, energetic particles, etc. These are efficient and essential probes for studying many technique and scientific issues in the fields of new materials, biological sciences, environmental sciences, life sciences, medical science, etc. Nano Science and Technology (NST) is a newly emerging multidisciplinary science and the frontier in the 21 st century, it is expected to dominate the technological revolution in diverse aspects of our life. It involves diverse fields such as nanomaterials, nanobiological sciences, environmental nanotechnology, nanomedicine, etc. nanotechnology was once considered as a futuristic science with applications several decades in the future and beyond. But, the rapid development of nanotechnology has broken this prediction. For example, diverse types of manufactured nanomaterials or nanostructures have been currently utilized in industrial products, semiconductors, electronics, stain-resistant clothing, ski wax, catalysts, other commodity products such as food, sunscreens, cosmetics, automobile parts, etc., to improve their performance of previous functions, or completely create novel functions. They will also be increasingly utilized in medicines for purposes of clinic therapy, diagnosis, and drug delivery. In the talk, we will discuss the possibility of NST-NST integration: how to apply the unique probes of advanced radiochemical and nuclear techniques in nanoscience and nanotechnology. (authors)

Measurement of void fractions by nuclear techniques; Medicion de fracciones de vacio por tecnicas nucleares

Energy Technology Data Exchange (ETDEWEB)

Hernandez G, A.; Vazquez G, J.; Diaz H, C.; Salinas R, G.A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

1997-07-01

In this work it is done a general analysis of those techniques used to determine void fractions and it is chosen a nuclear technique to be used in the heat transfer circuit of the Physics Department of the Basic Sciences Management. The used methods for the determination of void fractions are: radioactive absorption, acoustic techniques, average velocity measurement, electromagnetic flow measurement, optical methods, oscillating absorption, nuclear magnetic resonance, relation between pressure and flow oscillation, infrared absorption methods, sound neutron analysis. For the case of this work it will be treated about the radioactive absorption method which is based in the gamma rays absorption. (Author)

Practical applications of activation analysis and other nuclear techniques

International Nuclear Information System (INIS)

Lyon, W.S.

1982-01-01

Neeutron activation analysis (NAA) is a versatile, sensitive multielement, usually nondestructive analytical technique used to determine elemental concentrations in a variety of materials. Samples are irradiated with neutrons in a nuclear reactor, removed, and for the nondestructive technique, the induced radioactivity measured. This measurement of γ rays emitted from specific radionuclides makes possible the quantitative determination of elements present. The method is described, advantages and disadvantages listed and a number of examples of its use given. Two other nuclear methods, particle induced x-ray emission and synchrotron produced x-ray fluorescence are also briefly discussed

Radiation safety in industrial applications of nuclear techniques

International Nuclear Information System (INIS)

Lam, E.S.

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

Radiation safety in industrial applications of nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

Research achievements in Bangladesh agriculture using nuclear techniques

International Nuclear Information System (INIS)

Sattar, M.A.

1997-01-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN 3 ). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using 51 Cr-EDTA and 125 I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come

Nuclear techniques for the determination of protein content in plant material

International Nuclear Information System (INIS)

Niemann, E.G.

1980-01-01

Elemental analysis for nitrogen has gained in importance over the last decade, as protein improvement and protein control in food and feed has come to be recognized as one of the most promising ways of overcoming deficiencies in food production and distribution. The need for fast and reliable screening methods has stimulated the improvement and automation of classic chemical methods for protein and nitrogen determination and, on the other hand, the development and adaptation of physical and nuclear analysis procedures. After about ten years of work this process has come to a stage where a critical evaluation of the existing methods seems necessary and justified. The present review describes and compares nuclear techniques for nitrogen determination in plant material. These include activation analysis techniques, based on various nuclear reactions, initiated by fast and thermal neutrons, energetic photons, protons, deuterons and α-particles. Other nuclear methods have been applied for nitrogen or protein determination, like ESCA, PIXE, NMR, NQR and Moessbauer spectroscopy, some of which possess good potential as screening methods. Depending on the needs, such as sample size, analysis rate and postulated accuracy, different nuclear techniques may be selected today for nitrogen screening. Some of the techniques discussed have additional potential for carbon or oxygen determination, for measuring depth or lateral N distribution, or for the recognition of the type of chemical N binding. Though most if not all techniques need further development for routine application, they are able to compete with chemical techniques in cost, rate and accuracy. (author)

Physics of nuclear radiations concepts, techniques and applications

CERN Document Server

Rangacharyulu, Chary

2013-01-01

Physics of Nuclear Radiations: Concepts, Techniques and Applications makes the physics of nuclear radiations accessible to students with a basic background in physics and mathematics. Rather than convince students one way or the other about the hazards of nuclear radiations, the text empowers them with tools to calculate and assess nuclear radiations and their impact. It discusses the meaning behind mathematical formulae as well as the areas in which the equations can be applied. After reviewing the physics preliminaries, the author addresses the growth and decay of nuclear radiations, the stability of nuclei or particles against radioactive transformations, and the behavior of heavy charged particles, electrons, photons, and neutrons. He then presents the nomenclature and physics reasoning of dosimetry, covers typical nuclear facilities (such as medical x-ray machines and particle accelerators), and describes the physics principles of diverse detectors. The book also discusses methods for measuring energy a...

Proceedings of the Third National Conference on Nuclear Physics and Techniques

International Nuclear Information System (INIS)

Nguyen Thanh Binh; Nguyen Nhi Dien; Tran Kim Hung; Vuong Huu Tan

2000-01-01

The proceedings contains 130 papers of scientists from institutes, universities, enterprises nation-wide in Vietnam. Its subjects include: nuclear physics, theoretical physics, science and technology of nuclear reactor, application of nuclear techniques in industry, agriculture, biology, medicine, geo-hydrology, environmental protection, nuclear equipment, radiation technology, material technology, waste management, ect

Technique for simultaneous adjustment of large nuclear data libraries

International Nuclear Information System (INIS)

Harris, D.R.; Wilson, W.B.

1975-01-01

Adjustment of the nuclear data base to agree with integral observations in design work has been limited in part by problems in the required inversion of matrices. It is shown that this inversion problem can be circumvented and arbitrarily large nuclear data libraries can be adjusted simultaneously when the basic data are uncorrelated. The technique is illustrated by adjusting nuclear data to integral observations made on fast reactor benchmark critical assemblies. 3 tables

Testing techniques in nuclear, petroleum and metallurgic industries

International Nuclear Information System (INIS)

Anon.

1977-01-01

The nondestructive testing techniques by ultrasonic waves, eddy currents, acoustic emission used by Intercontrole (a CEA's affiliated firm in nuclear petrochemical, and engineering site measurements) are presented [fr

Program of nuclear techniques application (triennial 88-89-90)

International Nuclear Information System (INIS)

1988-01-01

A real analysis of the potentiality and the possibility from Nuclear Energetic Research Institute (IPEN) Sao Paulo, Brazil in realize the researches and developments for offering specialized services of nuclear techniques for using in bioengineering, industry, isotope production, IEA-R1 reactor irradiation and radiation detectors and sensors are described. (author)

Proceedings of XIV Workshop on Nuclear Physics. VIII International Symposium on Nuclear and Related Techniques. WONP-NURT 2013

International Nuclear Information System (INIS)

2013-02-01

This year 2013, the XIV Workshop on Nuclear Physics and VIII International Symposium on Nuclear and Related Techniques, WONP-NURT 2013 organized by the Center of Technological Applications and Nuclear Development from 5 to 8 February at the National Museum of Fine Arts. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Proceedings of XV Workshop on Nuclear Physics. IX International Symposium on Nuclear and Related Techniques. WONP-NURT 2015

International Nuclear Information System (INIS)

2015-02-01

This year 2015, the XV Workshop on Nuclear Physics and IX International Symposium on Nuclear and Related Techniques, WONP-NURT 2015 organized by the Center of Technological Applications and Nuclear Development from 9 to 13 February at the National Museum of Fine Arts. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM.

Voltage switching technique for detecting nuclear spin polarization in a quantum dot

International Nuclear Information System (INIS)

Takahashi, Ryo; Kono, Kimitoshi; Tarucha, Seigo; Ono, Keiji

2010-01-01

We have introduced a source-drain voltage switching technique for studying nuclear spins in a vertical double quantum dot. Switching the source-drain voltage between the spin-blockade state and the zero-bias Coulomb blockade state can tune the energy difference between the spin singlet and triplet, and effectively turn on/off the hyperfine interaction. Since the change in the nuclear spin state affects the source-drain current, nuclear spin properties can only be detected by transport measurement. Using this technique, we have succeeded in measuring the timescale of nuclear spin depolarization. Furthermore, combining this technique and an RF ac magnetic field, we successfully detected continuous-wave NMR signals of 75 As, 69 Ga, and 71 Ga, which are contained in a quantum dot. (author)

Nuclear techniques in animal production and health

Energy Technology Data Exchange (ETDEWEB)

Moustgaard, J [Institute of Physiology, Endocrinology and Bloodgrouping, The Royal Veterinary and Agricultural University, Copenhagen (Denmark)

1976-07-01

In the fight against animal diseases, especially parasitic infections, nuclear techniques have also proved to be of great value, namely in the production of irradiated vaccines against helminthic diseases. In this context it should be stressed that reduced productivity due to protein loss caused by intestinal parasites is a problem of paramount economic importance in developing as well as developed countries. Recently radioisotopes in the so-called radioimmunoassays have also been applied in determination of the hormonal status of farm animals and to elucidate its relation to the environment and to the physiological and nutritional condition of the animal. This rapidly developing technique may make it possible to control the reproductive performance of cattle and sheep more efficiently than has hitherto been the case. Production of animal protein of a high biological value for human nutrition is still a problem of great concern for the less developed countries. Without doubt the use of nuclear techniques, hand in hand with other research methods, will be of great help in overcoming this condition, always provided that the countries in question possess the necessary equipment and trained personnel.

Nuclear techniques in animal production and health

International Nuclear Information System (INIS)

Moustgaard, J.

1976-01-01

In the fight against animal diseases, especially parasitic infections, nuclear techniques have also proved to be of great value, namely in the production of irradiated vaccines against helminthic diseases. In this context it should be stressed that reduced productivity due to protein loss caused by intestinal parasites is a problem of paramount economic importance in developing as well as developed countries. Recently radioisotopes in the so-called radioimmunoassays have also been applied in determination of the hormonal status of farm animals and to elucidate its relation to the environment and to the physiological and nutritional condition of the animal. This rapidly developing technique may make it possible to control the reproductive performance of cattle and sheep more efficiently than has hitherto been the case. Production of animal protein of a high biological value for human nutrition is still a problem of great concern for the less developed countries. Without doubt the use of nuclear techniques, hand in hand with other research methods, will be of great help in overcoming this condition, always provided that the countries in question possess the necessary equipment and trained personnel

Novel imaging techniques for the nuclear microprobe

International Nuclear Information System (INIS)

Saint, A.

1998-01-01

Many of the developments of the scanning electron microscope (SEM) have been paralleled during the development of the scanning nuclear microprobe. Secondary electrons were used in the early development of both devices to provide specimen imaging due to the large numbers of secondaries produced per incident charged particle. Other imaging contrast techniques have also been developed on both machines. These include X-ray analysis, scattering contrast, transmission microscopy, channelling induced charge and others. The 'cross-section dependent' imaging techniques such as PIXE, RBS, NRA, etc., rely on the beam current on target for a given resolution. This has prompted research and development of brighter ion sources to maintain probe resolution at high beam current. Higher beam current bring problems with beam damage to the specimen. Low beam current techniques however rely on high countrate data collection systems, but this is only for spectroscopy. To produce an image we can increase beam currents to produce live-time images for specimen manipulation and observation. The work presented here will focus on some developments in live-time imaging with a nuclear micro probe that have taken place recently at the School of Physics, Microanalytical Research Centre (MARC), University of Melbourne

Nuclear analytical techniques for on-line elemental analysis in industry

International Nuclear Information System (INIS)

1988-06-01

This report is the result of an advisory group meeting held in Espoo, Finland, 1-5 June, 1987. The purpose of the meeting was to assess the present status and development of nuclear analytical techniques used for industrial process control. The report gives an overview of the different nuclear techniques used for process control and the most important applications. A separate abstract was prepared for each of the 7 papers presented at the meeting. Refs, figs and tabs

Technique of nuclear reactors controls; Technique des controles des reacteurs nucleaires

Energy Technology Data Exchange (ETDEWEB)

Weill, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1953-12-15

This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [French] Nous avons aborde le probleme de la ''Technique du Controle des reacteurs nucleaires'' dans le but de realiser le controle du reacteur de Saclay. C'est ainsi que nous avons ete amene a etudier le probleme dans son ensemble, tel qu'il se pose pour tout reacteur a uranium naturel. Ce travail traite principalement du domaine des mesures a caractere nucleaire et s'etend dans le domaine des mesures thermodynamque de niveaux, etc... mettant en relief les caracteristiques nouvelles exigees de la part des detecteurs du fait de leur utilisation dans le flux de neutrons thermiques. Dans le domaine de mesures nucleaires, nous indiquons principalement les realisations et les resultats obtenus pour les detecteurs de neutrons thermiques et pour la mesure de courants d'ionisations. Nous traitons egalement du probleme technique du demarrage d'un reacteur et du probleme de la mesure de la reactivite. Nous donnons les details necessaires a la comrehension de tous les schemas et plans de cablages essentiels mis au point, en particulier, pour le reacteur de Saclay. (auteur)

Research achievements in Bangladesh agriculture using nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Sattar, M.A. [Bangladesh Institute of Nuclear Agriculture, Mymensingh, (Bangladesh)

1997-10-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN{sub 3}). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using {sup 51}Cr-EDTA and {sup 125}I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come 32 refs., 1 tab.

Methods and techniques of nuclear in-core fuel management

International Nuclear Information System (INIS)

Jong, A.J. de.

1992-04-01

Review of methods of nuclear in-core fuel management (the minimal critical mass problem, minimal power peaking) and calculational techniques: reactorphysical calculations (point reactivity models, continuous refueling, empirical methods, depletion perturbation theory, nodal computer programs); optimization techniques (stochastic search, linear programming, heuristic parameter optimization). (orig./HP)

Active neutron technique for detecting attempted special nuclear material diversion

International Nuclear Information System (INIS)

Smith, G.W.; Rice, L.G. III.

1979-01-01

The identification of special nuclear material (SNM) diversion is necessary if SNM inventory control is to be maintained at nuclear facilities. (Special nuclear materials are defined for this purpose as either 235 U of 239 Pu.) Direct SNM identification by the detection of natural decay or fission radiation is inadequate if the SNM is concealed by appropriate shielding. The active neutron interrogation technique described combines direct SNM identification by delayed fission neutron (DFN) detection with implied SNM detection by the identification of materials capable of shielding SNM from direct detection. This technique is being developed for application in an unattended material/equipment portal through which items such as electronic instruments, packages, tool boxes, etc., will pass. The volume of this portal will be 41-cm wide, 53-cm high and 76-cm deep. The objective of this technique is to identify an attempted diversion of at least 20 grams of SNM with a measurement time of 30 seconds

International conference on isotopic and nuclear analytical techniques for health and environment. Unedited papers

International Nuclear Information System (INIS)

2004-01-01

The IAEA has been supporting nuclear and isotopic analytical techniques as part of its mandate to foster the peaceful uses of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through technical co-operation assistance in many laboratories of Member States. These techniques, including INAA, CRF, PIXE, stable isotopes and radioisotopes, α, β, γ spectrometry, Moessbauer spectrometry, etc., have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to crosscheck critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible. In light of its continued commitment and support, the IAEA organized the International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment. Out of 220 from 61 countries who applied for participation, 155 official participants and five observers from 47 countries were in attendance, with 67 from 32 developing countries and 21 from international organizations, including the World Health Organization. Eleven plenary sessions were held. Also conducted was a panel discussion on Human Capacity Development Needs in the Areas of Analytical Quality Control Services (AQCS), Radiochemistry and Nutrition. The scientific sessions were divided into several topics, which reflect some of the important activities of the IAEA's Department of Nuclear Sciences and Applications (NA): - Isotopic and nuclear techniques (general); - Metrology and quality assurance in nuclear measurements; - Nuclear analytical techniques for environmental monitoring; - Radioecology; - Environmental monitoring; - Radiological safety of food and water; - Methodological aspects of stable isotope techniques in health and environment; - Applications of isotopic techniques in health and environment; - New

Nuclear techniques for on-line analysis in the mineral and energy industries

International Nuclear Information System (INIS)

Sowerby, B.D.; Watt, J.S.

1994-01-01

Nuclear techniques are the basis of many on-line analysis systems which are now widely used in the mineral and energy industries. Some of the systems developed by the CSIRO depend entirely on nuclear techniques; others use a combination of nuclear techniques and microwave, capacitance, or ultrasonic techniques. The continuous analysis and rapid response of these CSIRO systems has led to improved control of mining, processing and blending operations, with increased productivity valued at A$50 million per year to Australia, and $90 million per year world wide. This paper reviews developments in nuclear on-line analysis systems by the On-Line Analysis Group in CSIRO at Lucas Heights. Commercialised systems based on this work analyse mineral and coal slurries and determine the ash and moisture contents of coal and coke on conveyors. This paper also reviews two on-line nuclear analysis systems recently developed and licensed to industry, firstly for the determination of the mass flow rates of oil/water/gas mixtures in pipelines, and secondly for determination of the moisture, specific energy, ash and fouling index in low rank coals. 8 refs., 3 tabs., 4 figs

Application of nuclear and allied techniques for the characterisation of forensic samples

International Nuclear Information System (INIS)

Sudersanan, M.; Kayasth, S.R.; Pant, D.R.; Chattopadhyay, N.; Bhattacharyya, C.N.

2002-01-01

Full text: Forensic science deals with the application of various techniques for physics, chemistry and biology for crime investigation. The legal implication of such analysis put considerable restriction on the choice of analytical techniques. Moreover, the unknown nature of the materials, the limited availability of samples and the large number of elements to be analysed put considerable strain on the analytical chemist on the selection of the appropriate technique. The availability of nuclear techniques has considerably enhanced the scope of forensic analysis. This paper deals with the recent results on the use of nuclear and allied analytical techniques for forensic applications. One of the important types of samples of forensic importance pertain to the identification of gunshot residues. The use of nuclear techniques has considerably simplified the interpretation of results through the use of appropriate elements like Ba, Cu, Sb, Zn, As and Sn etc. The combination of non-nuclear techniques for elements like Pb and Ni which are not easily amenable to be analysed by NAA and the use of appropriate separation procedure has led to the use of this method as a valid and versatile analytical procedure. In view of the presence of a large amounts of extraneous materials like cloth, body tissues etc in these samples and the limited availability of materials, the procedures for sample collection, dissolution and analysis have been standardized. Analysis of unknown materials like powders, metallic pieces etc. for the possible presence of nuclear materials or as materials in illicit trafficking is becoming important in recent years. The use of multi-technique approach is important in this case. Use of non-destructive techniques like XRF and radioactive counting enables the preliminary identification of materials and for the detection of radioactivity. Subsequent analysis by NAA or other appropriate analytical methods allows the characterization of the materials. Such

Frontier of Advanced Accelerator Applications and Medical Treatments Using Nuclear Techniques. Abstract

International Nuclear Information System (INIS)

2015-01-01

To address the challenges of research-based practice, developing advanced accelerator applications, and medical treatments using nuclear tecniqoes, researchers from Rajamakala University of Technology Lanna, Office of Atoms for Peace, and Chiang Mai University have joined in hosting this conference. Nuclear medicine, amedical specialty, diagnoses and treats diseases in a safe and painless way. Nuclear techniques can determine medical information that may otherwise be unavailable, require surgery, or necessitate more expensive and invasive diagnostic tests. Advance in nuclear techniques also offer the potential to detect abnormalities at earlier stages, leasding to earlier treatment and a more successful prognosis.

Scintigraphic instruments and techniques in nuclear medicine

International Nuclear Information System (INIS)

Bornand, Bernard; Soussaline, Francoise; CEA, 91 - Orsay

1978-01-01

A short survey of data processing techniques in medical scintigraphy is presented. Three lists of abstracts being firstly from reviews, secondly from proceedings, and thirdly of reports and thesis, are presented as an addendum to the bibliography CEA-BIB-214, for the period 1975 up to march 1977. An index of authors and subjects is included. Finally an appendix with 18 patents is attached. Several bibliographical reviews: Excerpta Medica (Nuclear Medicine) Abstract Journal, INIS Atomindex, Nuclear Science Abstracts, together with a number of special journals and documents, recently published, have been used for this work [fr

Review of nuclear techniques in South African agricultural research: 1963-1984

International Nuclear Information System (INIS)

Marais, P.G.; Kotze, W.A.G.; Joubert, M.E.; Huismans, H.; Brodrick, H.T.

1985-01-01

The use of nuclear techniques in agriculture research in the RSA was reviewed at a National Conference on Nuclear Energy in 1963. Since then, 573 publications on the use of nuclear techniques in agriculture have appeared, which can be classified as follows: zoology; botany; food irradiation; soil and plant relations; soil moisture and ground water studies; and other radiation and tracer applications. A survey of literature on the use of radioactive isotopes in agriculture published between 1973 and 1980, including South African publications, was compiled by the Atomic Energy Board in 1980 but did not include any review of the scientific material

Proceedings of VII International Symposium on Nuclear and Related Techniques. XIII Workshop on Nuclear Physics. WONP-NURT 2011

International Nuclear Information System (INIS)

2011-02-01

This year the XIII Workshop on Nuclear Physics (WONP) and the VII Symposium on Nuclear and Related Techniques (NURT) are organized jointly, by Instituto Superior de Tecnologias y Ciencias Aplicadas and Centro de Aplicaciones Tecnologicas y Desarrollo Nuclear. Both events gather scientists from several countries with top research work on nuclear physics and its applications. WONP has been carried out since 1994 promoting an ever-exchanging exchange between professionals of various nuclear and applied physics fields, those related to environmental and health care. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Proceedings of VI International Symposium on Nuclear and Related Techniques. XII Workshop on Nuclear Physics. WONP-NURT 2009

International Nuclear Information System (INIS)

2009-02-01

This year the XII Workshop on Nuclear Physics (WONP) and the VI Symposium on Nuclear and Related Techniques (NURT) are organized jointly, by Instituto Superior de Tecnologias y Ciencias Aplicadas and Centro de Aplicaciones Tecnologicas y Desarrollo Nuclear. Both events gather scientists from several countries with top research work on nuclear physics and its applications. WONP has been carried out since 1994 promoting an ever-exchanging exchange between professionals of various nuclear and applied physics fields, those related to environmental and health care. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

Isotopic Determination of Nuclear Materials Using Nuclear Fission Track Registration Technique and Thermal Ionization Mass Spectrometric Technique

International Nuclear Information System (INIS)

Jeon, Young Sin; Pyo, Hyeong Yeol; Park, Yong Joon; Song, Kyu Seok; Kim, Won Ho; Jee, Kwang Yong

2007-05-01

It is very important to develope the technology for the determination of isotopic ratios of hot particles( 234 U, 235 U, 236 U etc.) detected from swipe samples of various nuclear facilities. This technology is highly competitive internationally and has to be established independently as long as our government maintains atomic energy and treats nuclear materials. In this text, sample pretreatment procedure, gamma-ray counting, alpha or fission track techniques, isotopic analysis of U and Pu, background problems and detection limits for mass determination, and their application to the real swipe sample were described with detailed procedure. This technology would contribute to the Korean economy's high growth rate as well as to superiority of government's leading research and development programs if successfully established

Analysis of archaeological pieces with nuclear techniques

International Nuclear Information System (INIS)

Tenorio, D.

2002-01-01

In this work nuclear techniques such as Neutron Activation Analysis, PIXE, X-ray fluorescence analysis, Metallography, Uranium series, Rutherford Backscattering for using in analysis of archaeological specimens and materials are described. Also some published works and thesis about analysis of different Mexican and Meso american archaeological sites are referred. (Author)

Nuclear techniques in industry

International Nuclear Information System (INIS)

Barnette, P.

The long term development and successful utilization of the Tongonan geothermal field for electric power generation is ultimately a function of the response of the reservoir to extensive exploitation. A field drawdown test of several years duration has been planned to test this response. A number of nuclear chemical techniques have been incorporated into this to assist in quantitatively tracing the subsurface movements of both reservoir and reinjected fluids; and to provide an early warning of changes in the physical and chemical properties of the reservoir fluids with respect to natural recharge. The programme will be implemented by Philippine Atomic Energy Commission (PAEC) under contract to Philippine National Oil Company - Energy Development Corporation (PNOC-EDC). (author)

Review Article : Utilization of Environmental Radiochemistry Techniques for Selection and Evaluation of Nuclear Facility Sites

International Nuclear Information System (INIS)

Atta, E.R.; Madbouly, A.M.; Zakaria, Kh.M.

2016-01-01

This research review puts necessary considerations on the available environmental radiochemistry techniques for selection and evaluation of a nuclear facility sites.The main bjective in site evaluation for nuclear facilities in terms of nuclear safety is to protect the site workers, the public and the environment from the effects of ionizing radiation release from nuclear facilities due to accidents. The extreme sensitivity and speed of radiochemical methods make their applications of considerable importance in several fields and they have found many uses. Information about the existed radioactivity in the different nuclear facilities is an essential requirement for their environmental assessment. It is necessary to estimate the various radioactivity levels in the environment through qualitative and quantitative analytical techniques and to assess the potential effects of the nuclear facility in the region by considering the characteristics of sites.The siting and site evaluation requirements are discussed. Emphasis was given to types of radiochemical techniques used for characterization of the site parameters which determine the potential hazards of the site on the facility and the facility on the site. Emphasis has been also given to the quantitative and qualitative analysis of naturally occurring radionuclides for monitoring and control .There are some techniques employed such as radioactive tracer technique, liquid scintillation technique, gamma spectrometry technique, neutron activation analysis technique, fluorimetric technique and isotope hydrology technique.

Nuclear techniques in coal and chemical industries

International Nuclear Information System (INIS)

Elbern, A.W.; Leal, C.A.

1980-01-01

The use of nuclear techniques for the determination of important parameters in industrial installations is exemplified; advantages of these techniques over other methods conventionally used are pointed out. The use of radiotracers in the study of physical and chemical phenomena occurring in the chemical industry is discussed. It is also shown that, using certain radioisotopes, it is possible to construct devices which enable, for example, the determination of the ash content in coal samples. These devices are economical and easy to be installed for the on-line control during coal transportation. (C.L.B.) [pt

A Dataset and a Technique for Generalized Nuclear Segmentation for Computational Pathology.

Science.gov (United States)

Kumar, Neeraj; Verma, Ruchika; Sharma, Sanuj; Bhargava, Surabhi; Vahadane, Abhishek; Sethi, Amit

2017-07-01

Nuclear segmentation in digital microscopic tissue images can enable extraction of high-quality features for nuclear morphometrics and other analysis in computational pathology. Conventional image processing techniques, such as Otsu thresholding and watershed segmentation, do not work effectively on challenging cases, such as chromatin-sparse and crowded nuclei. In contrast, machine learning-based segmentation can generalize across various nuclear appearances. However, training machine learning algorithms requires data sets of images, in which a vast number of nuclei have been annotated. Publicly accessible and annotated data sets, along with widely agreed upon metrics to compare techniques, have catalyzed tremendous innovation and progress on other image classification problems, particularly in object recognition. Inspired by their success, we introduce a large publicly accessible data set of hematoxylin and eosin (H&E)-stained tissue images with more than 21000 painstakingly annotated nuclear boundaries, whose quality was validated by a medical doctor. Because our data set is taken from multiple hospitals and includes a diversity of nuclear appearances from several patients, disease states, and organs, techniques trained on it are likely to generalize well and work right out-of-the-box on other H&E-stained images. We also propose a new metric to evaluate nuclear segmentation results that penalizes object- and pixel-level errors in a unified manner, unlike previous metrics that penalize only one type of error. We also propose a segmentation technique based on deep learning that lays a special emphasis on identifying the nuclear boundaries, including those between the touching or overlapping nuclei, and works well on a diverse set of test images.

Concerning the application of the nuclear and related techniques

International Nuclear Information System (INIS)

Desdin Garcia, Luis Felipe

1997-01-01

The present work intends to describe briefly, some of the nuclear and connected techniques of greater application in the conditions of developing countries, which are employed in the Center of Studies Applied to the Nuclear Development, and that can be of interest for the Latin-American countries. Within those techniques we have: radiobiology, that consists of the employment of ionizing radiations to induce mutations oriented to the improvement of the cultivations. It mentions the atmospheric contamination generated by the industry of the exposition to metals and toxic waste, and of mortiferous parasites that adapt quickly to the unhealthy environmental conditions. It also enumerates some advantages of the utilization of instruments based on radioisotopic fountains. (S. Grainger) [es

Nuclear techniques and the disposal of non-radioactive solid wastes

International Nuclear Information System (INIS)

Landsberger, S.; Buchholz, B.

1993-01-01

One of the most vital and persistent public health challenges facing local, state, and national governments is the disposal of solid waste produced from industrial, utility, and municipal sources. There is a growing interest in the monitoring, control, and safe disposal of the chemical constituents arising from these sources. For instance, it is now well known that the release of by products from coal-fired power plants - namely airborne particulates, bottom ash, and fly ash - can have adverse effects on air and water quality. It is therefore important that reliable chemical analytical techniques are readily available to assess the impact of widespread disposal practices of organic and inorganic chemicals. The use of nuclear and nuclear-related analytical techniques - such as neutron activation analysis, energy dispersive x-ray fluorescence and particle induced X-ray emission - have become widespread in major areas of science and technology. These methods and techniques have important applications in such work since they can be used for both the determination of specific individual pollutants (e.g. toxic heavy metals) and multi-elemental analyses for source identification and apportionment purposes. Other nuclear techniques, such as isotope tracers, have also had wide acceptance in characterizing diffusion patterns for metals in soil and aqueous environments and water pollution flows. 1 graph., 1 tab

Application of nuclear techniques in agriculture and medicine: the TRNC experience

International Nuclear Information System (INIS)

Senvar, C.; Korkut, F.C.

2002-01-01

As a small island State in the Eastern corner of the Mediterranean, better known for its potential in academia and tourism, the Turkish Republic of Northern Cyprus (TRNC) is not a country which produces or uses nuclear energy. Nevertheless, in order to safeguard against the biological effects of radiation, the TRNC benefits from nuclear sciences and techniques. In order to ensure the safety of agricultural produce, apart from utilizing nuclear medicine and Co60 (cobalt 60) therapy and similar applications, gamma spectrometric measurements are also undertaken by the State Laboratories which is attached to the Ministry of Health and Social Welfare. Similar techniques are used to measure radioactive content in environmental (sea water, soil, rocks, etc.) samples. All facilities in the TRNC which utilize nuclear agents in the field of medicine, including the X-Ray Screening centers, are subject to control and supervision in accordance with relevant regulations and waste disposal is carried out in cooperation with the Turkish Atomic Energy Authority (TAEK). Just as nuclear techniques can be used for peaceful purposes in such fields as agriculture, control of food-borne diseases, medicine and industry, it can also be abused. In awareness of the global threat of the illicit trafficking of nuclear materials and radioactive sources and given its geo-strategic location at the crossroads of Europe, the Middle East and North Africa, the TRNC has taken all the necessary measures, within the context of combating terrorism, to prevent illicit trafficking as such

Monte Carlo techniques in diagnostic and therapeutic nuclear medicine

International Nuclear Information System (INIS)

Zaidi, H.

2002-01-01

Monte Carlo techniques have become one of the most popular tools in different areas of medical radiation physics following the development and subsequent implementation of powerful computing systems for clinical use. In particular, they have been extensively applied to simulate processes involving random behaviour and to quantify physical parameters that are difficult or even impossible to calculate analytically or to determine by experimental measurements. The use of the Monte Carlo method to simulate radiation transport turned out to be the most accurate means of predicting absorbed dose distributions and other quantities of interest in the radiation treatment of cancer patients using either external or radionuclide radiotherapy. The same trend has occurred for the estimation of the absorbed dose in diagnostic procedures using radionuclides. There is broad consensus in accepting that the earliest Monte Carlo calculations in medical radiation physics were made in the area of nuclear medicine, where the technique was used for dosimetry modelling and computations. Formalism and data based on Monte Carlo calculations, developed by the Medical Internal Radiation Dose (MIRD) committee of the Society of Nuclear Medicine, were published in a series of supplements to the Journal of Nuclear Medicine, the first one being released in 1968. Some of these pamphlets made extensive use of Monte Carlo calculations to derive specific absorbed fractions for electron and photon sources uniformly distributed in organs of mathematical phantoms. Interest in Monte Carlo-based dose calculations with β-emitters has been revived with the application of radiolabelled monoclonal antibodies to radioimmunotherapy. As a consequence of this generalized use, many questions are being raised primarily about the need and potential of Monte Carlo techniques, but also about how accurate it really is, what would it take to apply it clinically and make it available widely to the medical physics

Safety prediction technique for nuclear power plants

International Nuclear Information System (INIS)

Henry, C.D. III; Anderson, R.T.

1985-01-01

This paper presents a safety prediction technique (SPT) developed by Reliability Technology Associates (RTA) for nuclear power plants. It is based on a technique applied by RTA to assess the flight safety of US Air Force aircraft. The purpose of SPT is to provide a computerized technique for objective measurement of the effect on nuclear plant safety of component failure or procedural, software, or human error. A quantification is determined, called criticality, which is proportional to the probability that a given component or procedural-human action will cause the plant to operate in a hazardous mode. A hazardous mode is characterized by the fact that there has been a failure/error and the plant, its operating crew, and the public are exposed to danger. Whether the event results in an accident, an incident, or merely the exposure to danger is dependent on the skill and reaction of the operating crew as well as external influences. There are three major uses of SPT: (a) to predict unsafe situations so that corrective action can be taken before accidents occur, (b) to quantify the impact of equipment malfunction or procedural, software, or human error on safety and thereby establish priorities for proposed modifications, and (c) to provide a means of evaluating proposed changes for their impact on safety prior to implementation and to provide a method of tracking implemented changes

Utilization of analytical techniques in aid the implantation of nuclear installations

International Nuclear Information System (INIS)

Ferreira, M.P.; Sabino, C.V.S.; Avelar, M.M.

1984-01-01

Nuclear, physico-chemical and classic techniques developed and utilized by Centro de Desenvolvimento de Tecnicas Nucleares are presented, as back up to the implementation and operation of nuclear installations related with several parts of fuel cycle from uranium prospecting to waste treatment samples of soils, ores, alloys, plastics, paints, biological materials, air and water were analysed. (M.C.K) [pt

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

International Nuclear Information System (INIS)

2004-01-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information.

Data retrieval techniques for nuclear power plants

International Nuclear Information System (INIS)

Sozzi, G.L.; Dahl, C.C.; Gross, R.S.; Voeller, J.G. III

1995-01-01

Data retrieval, processing retrieved data, and maintaining the plant documentation system to reflect the as-built condition of the plant are challenging tasks for most existing nuclear facilities. The information management systems available when these facilities were designed and constructed are archaic by today's standards. Today's plant documentation systems generally include hard copy drawings and text, drawings in various CAD formats, handwritten information, and incompatible databases. These existing plant documentation systems perpetuate inefficiency for the plant technical staff in the performance of their daily activities. This paper discusses data retrieval techniques and tools available to nuclear facilities to minimize the impacts of the existing plant documentation system on plant technical staff productivity

Optimizing Nuclear Reactor Operation Using Soft Computing Techniques

NARCIS (Netherlands)

Entzinger, J.O.; Ruan, D.; Kahraman, Cengiz

2006-01-01

The strict safety regulations for nuclear reactor control make it di±cult to implement new control techniques such as fuzzy logic control (FLC). FLC however, can provide very desirable advantages over classical control, like robustness, adaptation and the capability to include human experience into

Application of nuclear techniques in improving agricultural productivity with particular reference to pasture management

International Nuclear Information System (INIS)

Majid Ajorlo; Ramdzani Abdullah

2009-01-01

Nuclear techniques are appropriate tools to settle problems for agriculture or natural resources which cannot be solved using conventional agricultural techniques. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties -all by using nuclear techniques- with particular reference to pasture management are discussed. Insect pest control by Sterile Insect Techniques (SIT); soil and water management using neutron moisture probes; determining N-fixation capacity of legumes using N-15 isotope and nuclear methods; soil erosion measurement using of fallout radionuclide such as Cs-137; monitoring the movement of saline water in salt-affected land using isotopes of chlorine; livestock production and health by RIA and ELISA are some of achievements so far obtained in improving agricultural productivity. The ultimate goal of the nuclear technique investigation in agriculture is to use the resources efficiently in obtaining higher plant and livestock yields while increasing the quality and protecting them against insects, diseases and weeds. (Author)

Cuban advances in the application of nuclear techniques in petroleum prospection

International Nuclear Information System (INIS)

Rodriguez Martinez, Norma; Montero Cabrera, Maria Elena

1997-01-01

Accumulated experience demonstrates how effective is the utilization of nuclear techniques in oil prospection. Until a little while ago the national geophysical service had a wide complex of nuclear and radioactive methods that were including: Methods Neutron compensated Gamma Density Cabotage Gamma and Natural Gamma for evaluating the properties of capacity and filtration of the hydrocarbons reservoirs. Neutronic Impulses Generating Method for determining and specifying the water-oil contact zone within the hydrocarbon deposits, radioactive tracers for: 1- detecting breakdowns in the coating pipeline of the wells, 2- for determining zones of losses of circulation of the fluid in the wells; Furthermore in laboratory conditions are used other nuclear analytical techniques: Neutron Activation Analysis, X-Ray Fluorescence, gamma spectrometry to determine multielemental composition of rocks including the traces elements. The determination, have permitted us to characterize each one of the sequences and they are used as a criterion for their stratigraphic differentiation at the same time, they are techniques-considering their affectation to neutronic methods

International conference on isotopic and nuclear analytical techniques for health and environment. Book of abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Decision makers and stakeholders are becoming increasingly dependent on reliable chemical measurements that serve as a basis for decisions related to health, consumer safety, commerce, environment protection and compliance to regulations. Several millions of analytical results are produced annually, thus consuming appreciable amounts of resources. Reliability of these data is of major concern if cost-benefit figures are applied. Nuclear and isotopic analytical techniques (NATs) have been supported by the IAEA as part of their mandate to foster the peaceful use of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through Technical Co-operation assistance in many Member State laboratories. These techniques, including INAA, XRF, PIXE, stable and radioisotopes, spectrometroscopy, etc. have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to cross-check critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible to a great extent. The International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment was held 10-13 June 2003 in Vienna, Austria. The main purpose of this Conference was to bring together scientists, technologists, representatives of industry and regulatory authorities to exchange information and review the status of current developments and applications of isotopic and nuclear analytical techniques, and to discuss future trends and developments. A further objective is to identify potential opportunities for developing countries for applying isotopic and nuclear analytical techniques in health and environmental studies, and to consider the promotion and transfer of such technology. International developments and trends in health care, nutrition, and environmental monitoring

Development of programming techniques for behaviors of nuclear robot in real environment

International Nuclear Information System (INIS)

Tsukune, Hideo; Ogasawara, Tsukasa; Hirukawa, Hirohisa; Kitagaki, Kosei; Onda, Hiromu; Nakamura, Akira

1999-01-01

This study aims at establishment of synthetic autonomous technique on nuclear robot for a basic technique to realize remote control and automation of works in a nuclear plant by means of development on action programming function under actual environment. Before 1997 fiscal year, development of manipulation description system due to contact state transition series, development of mechanical assembly work instruction system using contact actuating system, development of new manipulator system with excellent controllability, development of quasi contact point monitoring method, and development of environmental model construction method using range finder and instruction tree, had been conducted. In 1997 fiscal year, probability of nuclear robot, on synthetic autonomous technique was shown by synthesis of many results on action programming planning function into a prototype system under an actual environment obtained by those developments. (G.K.)

Analysis of Defective Pipings in Nuclear Power Plants and Applications of Guided Ultrasonic Wave Techniques

International Nuclear Information System (INIS)

Koo, Dae Seo; Cheong, Yong Moo; Jung, Hyun Kyu; Park, Chi Seung; Park, Jae Suck; Choi, H. R.; Jung, S. S.

2006-07-01

In order to apply the guided ultrasonic techniques to the pipes in nuclear power plants, the cases of defective pipes of nuclear power plants, were investigated. It was confirmed that geometric factors of pipes, such as location, shape, and allowable space were impertinent for the application of guided ultrasonic techniques to pipes of nuclear power plants. The quality of pipes, supports, signals analysis of weldment/defects, acquisition of accurate defects signals also make difficult to apply the guided ultrasonic techniques to pipes of nuclear power plants. Thus, a piping mock-up representing the pipes in the nuclear power plants were designed and fabricated. The artificial flaws will be fabricated on the piping mock-up. The signals of guided ultrasonic waves from the artificial flaws will be analyzed. The guided ultrasonic techniques will be applied to the inspection of pipes of nuclear power plants according to the basis of signals analysis of artificial flaws in the piping mock-up

Nonlinear analysis techniques of block masonry walls in nuclear power plants

International Nuclear Information System (INIS)

Hamid, A.A.; Harris, H.G.

1986-01-01

Concrete masonry walls have been used extensively in nuclear power plants as non-load bearing partitions serving as pipe supports, fire walls, radiation shielding barriers, and similar heavy construction separations. When subjected to earthquake loads, these walls should maintain their structural integrity. However, some of the walls do not meet design requirements based on working stress allowables. Consequently, utilities have used non-linear analysis techniques, such as the arching theory and the energy balance technique, to qualify such walls. This paper presents a critical review of the applicability of non-linear analysis techniques for both unreinforced and reinforced block masonry walls under seismic loading. These techniques are critically assessed in light of the performance of walls from limited available test data. It is concluded that additional test data are needed to justify the use of nonlinear analysis techniques to qualify block walls in nuclear power plants. (orig.)

Application of the neutron noise analysis technique in nuclear power plants

International Nuclear Information System (INIS)

Lescano, Victor H.; Wentzeis, Luis M.

1999-01-01

Using the neutron noise analysis in nuclear power plants, and without producing any perturbation in the normal operation of the plant, information of the vibration state of the reactor internals and the behavior of the operating conditions of the reactor primary circuit can be obtained. In Argentina, the neutron noise analysis technique is applied in customary way in the nuclear power plants Atucha I and Embalse. A database was constructed and vibration frequencies corresponding to different reactor internals were characterized. Reactor internals with particular mechanical vibrations have been detected and localized. In the framing of a cooperation project between Argentina and Germany, we participated in the measurements, analysis and modelisation, using the neutron noise technique, in the Obrigheim and Gundremmingen nuclear power plants. In the nuclear power plant Obrigheim (PWR, 350 M We), correlations between the signals measured from self-power neutron detectors and accelerometers located inside the reactor core, were made. In the nuclear power plant Gundremmingen (BWR, 1200 M We) we participated in the study of a particular mechanical vibration detected in one of the instrumentation tube. (author)

Application condition of optical communication technique in the nuclear power plants

International Nuclear Information System (INIS)

Sakurai, Jun

1999-01-01

As the optical communication technique can process rapidly a lot of information and exclude perfectly error action due to noise, it is adopted gradually to commercial and company communications (containing operational managements in large scale facilities) in worldwide scale in stead of conventional communication technique (containing operational controls and measurements). In application to the nuclear power plants, as forming not only change in properties but also deterioration due to radiation damage in many cases of exposure to various types of radiations such as neutron, gamma-ray, and so forth in difference with conventional using environment, its using range is limited at present. In future, development of optical fibers or elements with excellent high temperature and radiation resistances usable stably at reactor core for a long time is essential. The regular application of the optical communication technique at the nuclear power plants begins just now, which is an expected field for future large development. And, for the old nuclear power plant in present operation, substitution to the optical communication technique in accompany with replace of appliances at periodical inspections will also be conducted. Its response is already required rapidly in the Tokyo Electric Power Co., Ltd.. (G.K.)

Applied research on air pollution using nuclear-related analytical techniques

International Nuclear Information System (INIS)

1994-01-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which will run from 1992-1996, and will build upon the experience gained by the Agency from the laboratory support that it has been providing for several years to BAPMoN - the Background Air Pollution Monitoring Network programme organized under the auspices of the World Meterological Organization. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XFR, and PIXE for the analysis of toxic and other trace elements in suspended particulate matter (including air filter samples), rainwater and fog-water samples, and in biological indicators of air pollution (e.g. lichens and mosses). The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for practically-oriented research and monitoring studies on air pollution ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural areas). This document reports the discussions held during the first Research Co-ordination Meeting (RCM) for the CRP which took place at the IAEA Headquarters in Vienna. Refs, figs and tabs

Status and development of nuclear techniques for commercial application in Sichuan

Energy Technology Data Exchange (ETDEWEB)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan [Sichuan Province Institute of Nuclear Technology Application, Chengdu, Sichuan (China)

2001-03-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Status and development of nuclear techniques for commercial application in Sichuan

International Nuclear Information System (INIS)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan

2001-01-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Nuclear Analytical Techniques for Commercial Applications in China

International Nuclear Information System (INIS)

Chai, Z.; Zhang, Z.; Feng, S.; Yang, J.; Ouyang, H.; Feng, X.; Mao, X.

2013-01-01

Since the establishment of the first Chinese nuclear reactor and accelerator in 1958, the nuclear analytical techniques (NATs) in China have dramatically developed in past half century. Nowadays 10 research nuclear reactors and over 100 small accelerators are available in China. Roughly, about 50 % of the machine time is applied for commercial purpose at the moment. The versatile nuclear analytical methods, mainly NAA, PIXE, XRF, etc., in China have been and are being applied widely and extensively in the following three fields: scientific, training, and commercial. This paper will briefly describe the past experience and present status about NATs for commercial applications. Some practical examples to demonstrate the role of NATs in this aspect will be given as well. Basically, the NATs used for the commercial applications in China can be divided into two types, i.e. off-line and on-line. The former mainly includes instrumental neutron activation analysis (INAA) for compositional determination, particle induced X-ray emission (PIXE) also for compositional analysis, accelerator-based mass-spectrometry (AMS) for analysis of C-14, Be-7, Cl-36 and other long-lived radioactive nuclides, solid state nuclear track detector

Nuclear-derived techniques improve cattle productivity and milk quality in Cameroon

International Nuclear Information System (INIS)

Dixit, Aabha

2016-01-01

Increasing agricultural production and improving the quality of milk and meat are key to combating poverty and increasing food security in Africa. Countries such as Cameroon are increasingly turning to innovative, nuclear and nuclear-derived techniques to control and prevent diseases among livestock, and boost cattle and milk production.

Knowledge management for sustainable applications of nuclear techniques in Ethiopia: Case study

International Nuclear Information System (INIS)

Belete, Z.

2004-01-01

Full text: Ethiopia is benefiting from applications of nuclear related technologies in agriculture, livestock, water and energy resource assessment, etc. Nuclear techniques are playing a major role in the health sector in terms of diagnosis and therapeutic applications. Cancer is a major cause of death in industrialized countries, and the number of cases in developing countries like Ethiopia is also growing rapidly. Ethiopia according to WHO estimates had over 52,000 patients newly diagnosed with cancer in the year 2000. In the year 2015, this number is projected to increase to over 83,000. The International Atomic Energy Agency (IAEA), through its technical cooperation program supported the establishment of Radiation Therapy Centre at the premises of Black Lion Hospital. The Centre stated work in 1977 with one medical Physicist, three therapy radiographers, and one radiation oncologist. Currently the Radiotherapy Centre is facing a number of constraints among which shortage of trained staff is the major one. The Centre has a capacity to give inpatient services for 20 patients. However, it is giving only outpatient service (limited to 700 patients per annum) due to shortage of trained manpower in the field. Moreover, brachytherapy, the treatment planning, and the mould room equipment are not utilized at all, while the teletherapy and other equipment are under utilised. Cancer patients awaiting treatment services are increasing from time to time (40,000 -50,000). Occurrence of death due to lack of access to medication is therefore becoming high. Noting this, the Agency provided fellowships and training courses on applications of nuclear techniques for diagnostic and therapeutic purposes in the treatment of cancer to limited staff members of the Radiotherapy Centre. In spite of the effort made by the Agency to train personnel in therapeutic applications of nuclear techniques, the number of trained staff remains low. This in turn affects the sustainable application of

Knowledge management for sustainable applications of nuclear techniques in Ethiopia: Case study

International Nuclear Information System (INIS)

Belete, Z.

2004-01-01

Full text: Ethiopia is benefiting from applications of nuclear related technologies in agriculture, livestock, water and energy resource assessment, etc. Nuclear techniques are playing a major role in the health sector in terms of diagnosis and therapeutic applications. Cancer is a major cause of death in industrialized countries, and the number of cases in developing countries like Ethiopia is also growing rapidly. Ethiopia according to WHO estimates had over 52,000 patients newly diagnosed with cancer in the year 2000. In the year 2015, this number is projected to increase to over 83,000. The International Atomic Energy Agency (IAEA), through its technical cooperation program supported the establishment of Radiation Therapy Centre at the premises of Black Lion Hospital. The Centre stated work in 1977 with one medical Physicist, three therapy radiographers, and one radiation oncologist. Currently the Radiotherapy Centre is facing a number of constraints among which shortage of trained staff is the major one. The Centre has a capacity to give inpatient services for 20 patients. However, it is giving only outpatient service (limited to 700 patients per annum) due to shortage of trained manpower in the field. Moreover, brachytherapy, the treatment planning, and the mould room equipment are not utilized at all, while the teletherapy and other equipment are under utilised. Cancer patients awaiting treatment services are increasing from time to time (40,000 - 50,000). Occurrence of death due to lack of access to medication is therefore becoming high. Noting this, the Agency provided fellowships and training courses on applications of nuclear techniques for diagnostic and therapeutic purposes in the treatment of cancer to limited staff members of the Radiotherapy Centre. In spite of the effort made by the Agency to train personnel in therapeutic applications of nuclear techniques, the number of trained staff remains low. This in turn affects the sustainable application

The radiological safety in the use of nuclear technique -activities developed by Centro de Desenvolvimento da Tecnologia Nuclear - CNEN

International Nuclear Information System (INIS)

Wakabayashi, T.; Pereira, E.G.; Hirayama, T.

1991-01-01

The activities developed by the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN supporting the users of nuclear techniques are described. The methodology used and future plans for the group are shown. (E.G.)

Nuclear radioactive techniques applied to materials research

CERN Document Server

Correia, João Guilherme; Wahl, Ulrich

2011-01-01

In this paper we review materials characterization techniques using radioactive isotopes at the ISOLDE/CERN facility. At ISOLDE intense beams of chemically clean radioactive isotopes are provided by selective ion-sources and high-resolution isotope separators, which are coupled on-line with particle accelerators. There, new experiments are performed by an increasing number of materials researchers, which use nuclear spectroscopic techniques such as Mössbauer, Perturbed Angular Correlations (PAC), beta-NMR and Emission Channeling with short-lived isotopes not available elsewhere. Additionally, diffusion studies and traditionally non-radioactive techniques as Deep Level Transient Spectroscopy, Hall effect and Photoluminescence measurements are performed on radioactive doped samples, providing in this way the element signature upon correlation of the time dependence of the signal with the isotope transmutation half-life. Current developments, applications and perspectives of using radioactive ion beams and tech...

Review of nuclear data improvement needs for nuclear radiation measurement techniques used at the CEA experimental reactor facilities

Directory of Open Access Journals (Sweden)

Destouches Christophe

2016-01-01

Full Text Available The constant improvement of the neutron and gamma calculation codes used in experimental nuclear reactors goes hand in hand with that of the associated nuclear data libraries. The validation of these calculation schemes always requires the confrontation with integral experiments performed in experimental reactors to be completed. Nuclear data of interest, straight as cross sections, or elaborated ones such as reactivity, are always derived from a reaction rate measurement which is the only measurable parameter in a nuclear sensor. So, in order to derive physical parameters from the electric signal of the sensor, one needs specific nuclear data libraries. This paper presents successively the main features of the measurement techniques used in the CEA experimental reactor facilities for the on-line and offline neutron/gamma flux characterizations: reactor dosimetry, neutron flux measurements with miniature fission chambers and Self Power Neutron Detector (SPND and gamma flux measurements with chamber ionization and TLD. For each technique, the nuclear data necessary for their interpretation will be presented, the main identified needs for improvement identified and an analysis of their impact on the quality of the measurement. Finally, a synthesis of the study will be done.

Role of nuclear techniques in oncological practice in Bangladesh

International Nuclear Information System (INIS)

Jehan, A.H.; Karim, M.A.; Begum, S.M.F.; Khan, H.U.

2004-01-01

Full text: Application of nuclear medicine techniques plays an integral part in the diagnosis, management and follow-up of cancer patients. Scintigraphic studies are able to detect primary and secondary malignant lesions in various organs e.g. bone, thyroid, breast, brain, lung, kidney, liver etc. Nuclear techniques are comparatively simple, non-invasive with minimum cost and radiation exposure. In recent years radio nuclide techniques are being widely accepted by the practicing oncologists especially for diagnosis, accurate assessment of the disease process and treatment planning. Bangladesh Atomic Energy Commission helped in establishing a Central Institute of Nuclear Medicine and Ultrasound and 14 smaller sub centers in the periphery, equipped with SPECT Gamma camera, Ultrasound, RIA, and DEXA facilities. A retrospective analysis of data of clinically diagnosed cancer patients referred to the sub center for diagnosis showed a total of 117 cases, 62 (72.54 %) female and 55 (64.35 %) male in the age group 40-70 years. The incidence of malignancy was calculated based on the age and gender. The highest incidence among the women was of cancer breast (67.74%) followed by liver (11.29%) and thyroid (11.29%). Among the male population, the highest incidence was of cancer prostate (29.09%) followed by liver (9.09%) and renal cell carcinoma (9.09%). As far as therapy is concerned, only cancer thyroid cases were assessed and considered for I-131 therapy with successful results. Of these patients treated with radioiodine, 9 were for primary disease while one patient had bony metastasis also. No death or complication has yet been reported. There is no controlled program for screening cancer patients in Bangladesh, but with assistance from the Nuclear Oncologists it was possible to obtain a raw data on the incidence of different cancers in Bangladesh. This in future may help in the management strategy of various malignancies. (author)

Use of Atomic and Nuclear Techniques in Elemental and Isotopic Analysis

International Nuclear Information System (INIS)

2008-01-01

This book is divided into four chapters which were presented by six authors of the best Arab specialists who have used the atomic and nuclear techniques for a long time and recognized their importance and capabilities in scientific researches. Atomic and Nuclear techniques are very successful in the field of analysis because they are the only way to proceed the analysis process with the requested accuracy and they are the cheapest at the same time. A number of these techniques were collected in this book on the basis of their accuracy and the abundance of using them in the analysis of material components, specially when these elements exist with insignificant percentage as in the case of poisons science, archaeology, nutrition, medicine and other applications.

Quality control of nuclear fuel plates using digital image processing techniques

International Nuclear Information System (INIS)

Salinas, Renato; Radd, Ulrich; Coronado, Harold; Olivares, Luis

2003-01-01

The Chilean Atomic Energy Commission (CCHEN) has developed the technology requires to manufacture low enriched uranium-235 nuclear fuel elements used in non-power reactor applications and in research. These fuel plates are assembled in two nuclear facilities located at La Reina (RECH-1) and Lo Aguirre where the present work was developed. Furthermore since high quality standards have been met, these facilities are able to export these nuclear fuel plates to foreign countries. Each MTR fuel elements consists of 16 low enriched uranium silicide (U 3 Si 2 ) fuel plates. A stringent quality assurance program requires among others, homogeneity measurements of uranium surface density values of these fuel plates, which are traditionally accomplished with optical densitometry methods. We have implemented and alternative technique which uses computer vision to determine uranium surface density values in these fuel plates. Both techniques are compared. Advantages of machine vision methods include considerable time saving and a complete quantitative evaluation of uranium densities as compared to the sparse technique involved in the optical densitometry method (Au)

Utilization technique for advanced nuclear materials database system Data-Free-Way'

International Nuclear Information System (INIS)

Fujita, Mitsutane; Kurihara, Yutaka; Kinugawa, Junichi; Kitajima, Masahiro; Nagakawa, Josei; Yamamoto, Norikazu; Noda, Tetsuji; Yagi, Koichi; Ono, Akira

2001-01-01

Four organizations the National Research Institute for Metals (NRIM), the Japan Atomic Energy Research Institute (JAERI), the Japan Nuclear Fuel Cycle Development Institute (JNC) and Japan Science and Technology Incorporation (JST), conducted the 2nd period joint research for the purpose of development of utilization techniques for advanced nuclear materials database system named 'Data-Free-Way' (DFW), to make more useful system to support research and development of the nuclear materials, from FY 1995 to FY 1999. NRIM intended to fill a data system on diffusion and nuclear data by developing utilization technique on diffusion informations of steels and aluminum and nuclear data for materials for its independent system together with participating in fulfil of the DFW. And, NRIM has entered to a project on wide area band circuit application agreed at the G7 by using technologies cultivated by NRIM, to investigate network application technology with the Michigan State University over the sea under cooperation assistant business of JST, to make results on CCT diagram for welding and forecasting of welding heat history accumulated at NRIM for a long term, to perform development of a simulator assisting optimum condition decision of welding. (G.K.)

Nuclear techniques in agriculture and industry in China

International Nuclear Information System (INIS)

Lu Yanxiao

1993-01-01

The presentation describes the application of nuclear techniques related to information acquisition by radiotracer and isotope-instrument getting physical parameters from measured substances, medical diagnostic information, evolution of novel substances or modification of materials through interaction of ionizing radiation with matter,mutation breeding in agriculture, cancer therapy in medicine, sterilization of medical products

Environmental monitoring in Slovakia using nuclear techniques

International Nuclear Information System (INIS)

Florek, M.; Holy, K.; Sivo, A.; Sykora, I.; Chudy, M.; Richtarikova, M.; Polaskova, A.; Hola, O.; Meresova, J.; Ondo-Estok, D.; Mankovska, B.; Frontasyeva, M.V.; Ermakov, E.V.

2005-01-01

The contamination of the atmosphere of Slovakia by stable elements and also by-,radionuclides as 14 C, 7 Be, 210 Pb and 222 Rn were studied during the last decade using nuclear techniques. The main aims of this research were the better understanding of processes taking place in the atmosphere, the quantification of the atmospheric pollution and its trend, as well as the evaluation of the health risk from this pollution

Basic principles of applied nuclear techniques

International Nuclear Information System (INIS)

Basson, J.K.

1976-01-01

The technological applications of radioactive isotopes and radiation in South Africa have grown steadily since the first consignment of man-made radioisotopes reached this country in 1948. By the end of 1975 there were 412 authorised non-medical organisations (327 industries) using hundreds of sealed sources as well as their fair share of the thousands of radioisotope consignments, annually either imported or produced locally (mainly for medical purposes). Consequently, it is necessary for South African technologists to understand the principles of radioactivity in order to appreciate the industrial applications of nuclear techniques [af

Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ``Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke``, was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs.

Demonstration of laser processing technique combined with water jet technique for retrieval of fuel debris at Fukushima Daiichi Nuclear Power Station

International Nuclear Information System (INIS)

Hanari, Toshihide; Takebe, Toshihiko; Yamada, Tomonori; Daido, Hiroyuki; Ishizuka, Ippei; Ohmori, Shinya; Kurosawa, Koichi; Sasaki, Go; Nakada, Masahiro; Sakai, Hideaki

2017-01-01

In decommissioning of Fukushima Daiichi Nuclear Power Station, a retrieval process of fuel debris in the Primary Containment Vessel by a remote operation is one of the key issues. In this process, prevention of spreading radioactive materials is one of the important considerations. Furthermore, an applicable technique to the process requires keeping of reasonable processing-efficiency. We propose to use the combined technique including a laser light and a water jet as a retrieval technique of the fuel debris. The laser processing technique combined with a repetitive pulsed water jet could perform an efficient retrieval processing. Our experimental result encourages us to promote further development of the technique towards a real application at Fukushima Daiichi Nuclear Power Station. (author)

The selection of probabilistic safety assessment techniques for non-reactor nuclear facilities

International Nuclear Information System (INIS)

Vail, J.

1992-01-01

Historically, the probabilistic safety assessment (PSA) methodology of choice is the well known event tree/fault tree inductive technique. For reactor facilities is has stood the test of time. Some non-reactor nuclear facilities have found inductive methodologies difficult to apply. The stand-alone fault tree deductive technique has been used effectively to analyze risk in nuclear chemical processing facilities and waste handling facilities. The selection between the two choices suggest benefits from use of the deductive method for non-reactor facilities

Moisture measurements in iron ores, in freight cars, through nuclear techniques

International Nuclear Information System (INIS)

Castagnet, A.C.; Said, M.; Duarte, U.

1975-01-01

The possibility and the advantages of using a nuclear technique for measuring on the spot (in the freight cars) and the moisture content of iron ores are described. The measurements included the determination of the volumetric moisture content and the density. From this values, the moisture content in percentage by weight was calculated. Nuclear Chicago d/M Combination Density-Moisture Probe with a 5 mCi Ra/Be source, and a digital portable scaler, were used. The investigated techniques give good results when the measurements are made directly on the ore surface, and has economical advantages over the gravimetric method by sampling. The probable reasons for both, the aleatory scattering of points and the lack of linear correlation between the values of both methods, when the nuclear measurement is made across the car walls are analized

Dictionary of the terms on nuclear scientific technique of France and Korea

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-09-15

This book is a dictionary of the terms on nuclear scientific technique, which defines 3,400 terms and phrases in detailed explanation and lists in order of French, Korean and English. The terms are in alphabetical order, which are collision, elastic collision, nuclear fusion, fusion energy, absorption analysis, absorption curve, neutron, nuclear, radiation, radioactivity, reactor, nuclear disintegration, and so on. This book has appendixes on a standard unit, radiation size and unit, and the table of elements.

Dictionary of the terms on nuclear scientific technique of France and Korea

International Nuclear Information System (INIS)

1984-09-01

This book is a dictionary of the terms on nuclear scientific technique, which defines 3,400 terms and phrases in detailed explanation and lists in order of French, Korean and English. The terms are in alphabetical order, which are collision, elastic collision, nuclear fusion, fusion energy, absorption analysis, absorption curve, neutron, nuclear, radiation, radioactivity, reactor, nuclear disintegration, and so on. This book has appendixes on a standard unit, radiation size and unit, and the table of elements.

Applications of nuclear techniques relevant for civil security

International Nuclear Information System (INIS)

Valkovi, Vlado

2006-01-01

The list of materials which are subject to inspection with the aim of reducing the acts of terrorism includes explosives, narcotics, chemical weapons, hazardous chemicals and radioactive materials. To this we should add also illicit trafficking with human beings. The risk of nuclear terrorism carried out by sub-national groups is considered not only in construction and/or use of nuclear device, but also in possible radioactive contamination of large urban areas. Modern personnel, parcel, vehicle and cargo inspection systems are non-invasive imaging techniques based on the use of nuclear analytical techniques. The inspection systems use penetrating radiations: hard x-rays (300 keV or more) or gamma-rays from radioactive sources ( 137 Cs and 60 Co with energies from 600 to 1300 keV) that produce a high resolution radiograph of the load. Unfortunately, this information is 'non-specific' in that it gives no information on the nature of objects that do not match the travel documents and are not recognized by a visual analysis of the radiographic picture. Moreover, there are regions of the container where x and gamma-ray systems are 'blind' due to the high average atomic number of the objects irradiated that appear as black spots in the radiographic image. Contrary to that is the use of neutrons; as results of the bombardment, nuclear reactions occur and a variety of nuclear particles, gamma and x-ray radiation is emitted, specific for each element in the bombarded material. The problem of material (explosive, drugs, chemicals, etc.) identification can be reduced to the problem of measuring elemental concentrations. Neutron scanning technology offers capabilities far beyond those of conventional inspection systems. The unique automatic, material specific detection of terrorist threats can significantly increase the security at ports, border-crossing stations, airports, and even within the domestic transportation infrastructure of potential urban targets as well as

Applications of nuclear techniques relevant for civil security

Energy Technology Data Exchange (ETDEWEB)

Valkovi, Vlado [Institute Ruder Boskovi, Zagreb (Croatia)

2006-05-15

The list of materials which are subject to inspection with the aim of reducing the acts of terrorism includes explosives, narcotics, chemical weapons, hazardous chemicals and radioactive materials. To this we should add also illicit trafficking with human beings. The risk of nuclear terrorism carried out by sub-national groups is considered not only in construction and/or use of nuclear device, but also in possible radioactive contamination of large urban areas. Modern personnel, parcel, vehicle and cargo inspection systems are non-invasive imaging techniques based on the use of nuclear analytical techniques. The inspection systems use penetrating radiations: hard x-rays (300 keV or more) or gamma-rays from radioactive sources ({sup 137}Cs and {sup 60}Co with energies from 600 to 1300 keV) that produce a high resolution radiograph of the load. Unfortunately, this information is 'non-specific' in that it gives no information on the nature of objects that do not match the travel documents and are not recognized by a visual analysis of the radiographic picture. Moreover, there are regions of the container where x and gamma-ray systems are 'blind' due to the high average atomic number of the objects irradiated that appear as black spots in the radiographic image. Contrary to that is the use of neutrons; as results of the bombardment, nuclear reactions occur and a variety of nuclear particles, gamma and x-ray radiation is emitted, specific for each element in the bombarded material. The problem of material (explosive, drugs, chemicals, etc.) identification can be reduced to the problem of measuring elemental concentrations. Neutron scanning technology offers capabilities far beyond those of conventional inspection systems. The unique automatic, material specific detection of terrorist threats can significantly increase the security at ports, border-crossing stations, airports, and even within the domestic transportation infrastructure of potential

77 FR 24228 - Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants

Science.gov (United States)

2012-04-23

... Used in Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Regulatory guide; issuance... guide, (RG) 1.218, ``Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants... of electric cables for nuclear power plants. RG 1.218 is not intended to be prescriptive, instead it...

Nuclear Techniques for Coronary Heart Disease Therapy after Percutaneous Transluminal Coronary Angioplasty

International Nuclear Information System (INIS)

Nurlaila-Z

2005-01-01

Nuclear techniques studies of the heart represent one of the fastest growing areas of research. Several years ago, nuclear medicine cardiac studies were limited for the evaluation and diagnosis of myocardial infarction. Development in radiopharmaceutical-chemistry and instrumentation have made possible advances in nuclear medicine for restenosis cardiovascular therapy after percutaneous transluminal coronary angioplasty.The radionuclide as radiation source can be delivered to the target basically by two techniques, those are catheter-based systems and radioactive stents. For this purpose,it can be use the γ and β emitter radionuclides, in which the β emitter radionuclides is an ideal radionuclide for endovascular therapy. Restenosis after percutaneous transluminal coronary angioplasty can be prevented by using the radioactive stent. This review discusses several techniques which could be used for restenosis cardiovascular therapy. Furthermore, several types of radiopharmaceutical and kinds of radionuclides as well as doses of the compounds for this purpose are also reviewed. (author)

Nuclear techniques in the diagnosis of lung diseases

Energy Technology Data Exchange (ETDEWEB)

Isawa, T

1993-12-31

Lung studies by nuclear techniques have been mostly neglected so far in the developing countries because ``total lung imaging`` was not possible. The availability of radioaerosols had now provided means to do complete lung studies in these countries. IAEA`s effort to make radioaerosol techniques more widely available in the Asian countries has been most noteworthy. Pulmonary tuberculosis is still prevalent in the developing countries, scourge of smoking is becoming increasingly wide spread and atmospheric pollution is on the rise as these countries race towards industrialisation with insufficient technical and financial resources. These conditions would provide a fascinating backdrop of infective, cancerous and pollution-induced conditions of lungs where lung imaging techniques would have a large scope of providing useful service 11 figs, 1 tab

Nuclear techniques in the diagnosis of lung diseases

International Nuclear Information System (INIS)

Isawa, T.

1992-01-01

Lung studies by nuclear techniques have been mostly neglected so far in the developing countries because ''total lung imaging'' was not possible. The availability of radioaerosols had now provided means to do complete lung studies in these countries. IAEA's effort to make radioaerosol techniques more widely available in the Asian countries has been most noteworthy. Pulmonary tuberculosis is still prevalent in the developing countries, scourge of smoking is becoming increasingly wide spread and atmospheric pollution is on the rise as these countries race towards industrialisation with insufficient technical and financial resources. These conditions would provide a fascinating backdrop of infective, cancerous and pollution-induced conditions of lungs where lung imaging techniques would have a large scope of providing useful service

Physical and measuring principles of nuclear well logging techniques

International Nuclear Information System (INIS)

Loetzsch, U.; Winkler, R.

1981-01-01

Proceeding from the general task of nuclear geophysics as a special discipline of applied geophyscis, the essential physical problems of nuclear well logging techniques are considered. Particularly, the quantitative relationship between measured values and interesting geologic parameters to be determined are discussed taking into account internal and external perturbation parameters. Resulting from this study, the technological requirements for radiation sources and their shielding, for detectors, electronic circuits in logging tools, signal transmission by cable and recording equipment are derived, and explained on the basis of examples of gamma-gamma and neutron-neutron logging. (author)

National symposium: nuclear technique in industry, medicine, agriculture and environment protection. Abstracts of papers

International Nuclear Information System (INIS)

1995-01-01

The National Symposium 'Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection' has been held in Rynia near Warsaw from 24 to 27 April 1995. Totally 94 lectures have been presented. The actual state of art in Polish investigations have been shown in all branches of applied nuclear sciences. The plenary session devoted to general topics has began the symposium. Further conference has been divided into 18 subject sessions. There were: 1) radiation technologies in environment protection; 2) radiation technologies in materials engineering; 3) radiation preservation in food; 4) radiation techniques for medical use; 5) radiotracers in industrial investigations; 6) radiotracers in water and sewage management and leak control; 7) tracers in hydrology; 8) radiotracers in materials testing; 9) instruments for environment protection, 10) radiometric industrial gages; 11) diagnostic and testing instruments; 12) application of nuclear techniques in materials testing; 13) applications of nuclear techniques in geology and hydrogeology; 14) radioanalytical methods; 15) radiation detectors; 16) radiation measurements; 17) data processing from radiometric experiments; 18) accelerators, isotopes manufacturing, INIS

Application of nuclear techniques in Poland; Perspektywy wykorzystania atomistyki w Polsce

Energy Technology Data Exchange (ETDEWEB)

Chmielewski, A.G.; Owczarczyk, A.; Urbanski, P. [Instytut Chemii i Techniki Jadrowej, Warsaw (Poland); Romanowski, M. [Biuro Studiow i Projektow Techniki Jadrowej `Proatom`, Warsaw (Poland); Stegowski, Z. [Akademia Gorniczo-Hutnicza, Cracow (Poland); Nowak, K. [Osrodek Badawczo-Rozwojowy Izotopow, Swierk-Otwock (Poland); Pachan, A. [Instytut Problemow Jadrowych, Swierk-Otwock (Poland); Tanczyk, R. [Centralne Laboratorium Ochrony Radiologicznej, Warsaw (Poland); Jablonski, R. [Zaklad Techniki Izotopowej `Polon-Izot`, Warsaw (Poland)

1997-12-31

The commercial applications of nuclear techniques in Poland have been presented. The special attention have been paid at: radiation technologies, application of radiometric gages in different branches of industry, tracer techniques, production and application of radiation sources in medicine, industry and material testing. 10 refs, 6 figs, 6 tabs.

State of the art report: Underwater examination techniques for spent nuclear fuels

International Nuclear Information System (INIS)

Chun, Yong Bum

1997-06-01

In these days, much efforts are being put to increase the final discharge burnup of PWR fuels. Therefore, the necessity of the inspection of irradiated nuclear fuels assembly during the the refueling outage is greatly increased to evaluate the safe operation and soundness of fuel assemblies in their next cycles in core, and apply the results for safe operation and effective core management. The necessity to evaluate the irradiation performance of indigenous nuclear fuels pushes the relative researchers to the development of on-site fuel inspection techniques and devices which can perform the underwater inspection and measurement of irradiated nuclear fuels during refueling outage. To ensure the technologies, the status of in situ underwater fuel inspection techniques and equipment were investigated and reviewed. Those information provides the fuel inspection capability to evaluate and certificate the performance and integrity of nuclear fuels which leads to the safe operation of NPP. (author). 49 refs., 52 figs

Nuclear techniques in schistosomiasis: Towards a schistosome vaccine

International Nuclear Information System (INIS)

Taylor, D.W.

1986-01-01

The paper reviews recent advances in schistosome research achieved through the application of nuclear techniques and aimed at the development of a vaccine. Two principal areas are discussed: first, immune effector mechanisms; and secondly, the application of hybridoma and recombinant DNA technology to the problem of production of large quantities of parasite antigens suitable for inclusion in an experimental vaccine. (author)

Nuclear techniques in Australian animal production

International Nuclear Information System (INIS)

1976-01-01

In tropical and sub-tropical regions, the production of domestic animals is frequently depressed by the climatic and ecological conditions. These negative effects can be overcome to a great extent by improved methods of animal and land management. In animal research, nuclear techniques are playing an important role in the study of different aspects of nutrition, metabolism, reproduction and health of domestic animals. In response to the need expressed by Member States for more information on these techniques, the Joint FAO/IAEA Division of Atomic Energy in Food and Agriculture and the IAEA's Division of Technical Assistance organized a study tour to Australia, a country which has developed considerable expertise in agricultural and animal research. The purpose of the study tour was to enable veterinary and animal scientists and administrators from developing countries in Asia and the Far East to observe at first hand the ways in which animal production, particularly meat, milk and wool, can be increased in tropical and sub-tropical areas. Fourteen senior scientists and research directors from seven Asian countries (Bangladesh, India, Republic of Korea, Malaysia, Philippines, Sri Lanka and Thailand) participated. The counterpart organizations in Australia were the Australian Development Assistance Agency (ADAA) and the Commonwealth Scientific and Industrial Research Organization (CSIRO). The chief programmer and co-ordinator of the study tour was John E. Vercoe, officer-in-charge of CSIRO's Tropical Cattle Research Centre in Rockhampton, and a former IAEA staff member. The tour was financed by the United Nations Development Programme. The participants visited research facilities of universities, national and state laboratories and commercial cattle producers. The tour started at Sydney and proceeded north along the east coast of Australia to Townsville. On the way, major stops were made in Armidale, Grafton, Wollongbar, Brisbane and Rockhampton. In Rockhampton, a

Scoping Study of Machine Learning Techniques for Visualization and Analysis of Multi-source Data in Nuclear Safeguards

Energy Technology Data Exchange (ETDEWEB)

Cui, Yonggang

2018-05-07

In implementation of nuclear safeguards, many different techniques are being used to monitor operation of nuclear facilities and safeguard nuclear materials, ranging from radiation detectors, flow monitors, video surveillance, satellite imagers, digital seals to open source search and reports of onsite inspections/verifications. Each technique measures one or more unique properties related to nuclear materials or operation processes. Because these data sets have no or loose correlations, it could be beneficial to analyze the data sets together to improve the effectiveness and efficiency of safeguards processes. Advanced visualization techniques and machine-learning based multi-modality analysis could be effective tools in such integrated analysis. In this project, we will conduct a survey of existing visualization and analysis techniques for multi-source data and assess their potential values in nuclear safeguards.

Applications of ultrasonic phased array technique during fabrication of nuclear tubing and other components for the Indian nuclear power program

International Nuclear Information System (INIS)

Kapoor, K.

2015-01-01

Ultrasonic phased array technique has been applied in fabrication of nuclear fuel and structural at NFC. The integrity of the nuclear fuel and structural components is most crucial as they are exposed to severe environment during operation leading to rapid degradation of its properties during its lifecycle. Nuclear Fuel Complex has mandate for the fabrication of the nuclear fuel and core structurals for Indian PHWRs/BWR, sub-assemblies for the PFBR and steam generator tubing for PFBR and PHWRs which are the most critical materials for the Indian Nuclear Power program. NDE during fabrication of these materials is thus most crucial as it provides the confidence to the designer for safe operation during its lifetime. Many of these techniques have to be developed in-house to meet unique requirements of high sensitivity, resolution and shape of the components. Some of the advancements in the NDE during the fabrication include use of ultrasonic phased array which is detailed in this paper

Facility and application of nuclear and supplementary analytical techniques at Dalat Nuclear Research Institute

International Nuclear Information System (INIS)

Nguyen Mong Sinh; Ho Manh Dung; Nguyen Thanh Binh

2006-01-01

The main applications of the nuclear and supplementary analytical techniques (N and SATs) in the Dalat Nuclear Research Institute (DNRI) and the facilities for the techniques are presented. The NATs in DNRI include the neutron activation analysis (NAA) with instrumental, radiochemical and prompt gamma methods (INAA, RNAA, PGNAA), the X-ray fluorescence analysis (XRFA) and the low-level counting and spectrometry. The sample irradiation sites for NAA, the automatic and manual pneumatic transfer systems, were installed at channels 7-1 and 13-2 and rotary rack on the Dalat research reactor. An ORTEC automatic sample changer (model ASC2) for γ-ray counting was equipped. A computer software for NAA based on the k 0 -standardization method for calculation of elemental concentration was developed. The low-level counting and spectrometry techniques have been setup. The devices required for sampling, sample preparation and data processing have also been equipped. The applications of N and SATs for determination of elemental composition, particularly important in providing data so-called trace elements, radionuclides and multi-element have been enlarged for objects of geology, archaeology, bio-agriculture, health-nutrition and environment. The implementation a quality system for N and SATs has been planned and initiated. (author)

Analysis of archaeological pieces with nuclear techniques; Analisis de piezas arqueologicas con tecnicas nucleares

Energy Technology Data Exchange (ETDEWEB)

Tenorio, D [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2002-07-01

In this work nuclear techniques such as Neutron Activation Analysis, PIXE, X-ray fluorescence analysis, Metallography, Uranium series, Rutherford Backscattering for using in analysis of archaeological specimens and materials are described. Also some published works and thesis about analysis of different Mexican and Meso american archaeological sites are referred. (Author)

Nuclear techniques in marine metal exploration

International Nuclear Information System (INIS)

Michaelis, W.

1979-01-01

The growing concern about the future availability of raw materials has increasingly drawn attention to the extensive marine metalliferous mineral deposits. Nuclear techniques can provide powerful analytical tools for exploring these resources. The measurement of natural gamma radiation, X-ray fluorescence analysis and a variety of neutron techniques based on 252 Cf, (α,n) and (d,n) sources are now in use or appear to make progress. Improvement of the relevant cross sections could considerably advance the technical development both in the field and in the laboratory. Particular consideration should be given to a number of energy-dependent cross sections pertaining to neutron and gamma transport in field application of activation analysis or radiative capture, to neutron cross sections for production of gamma rays from inelastic collisions, to cross sections of threshold reactions which either ensure elemental selectivity or are the source of elemental interferences and, finally, to cross sections for quasi-prompt activation with 14 MeV neutrons. (orig.) [de

Indentation techniques in nuclear applications: a review paper

International Nuclear Information System (INIS)

Spino, J.; Goll, W.; Toscano, E.H.

2005-01-01

Indentation testing, in particular micro-indentation tests, is a straightforward method to determine several properties of irradiated materials. In fact, with this type of tests, material constants and fracture properties can be deduced from measurements performed on a relatively small surface, which constitutes an important advantage when dealing with highly radioactive specimens. On the other hand, since the material response to indentation is complex, with the occurring elastic and plastic deformations being affected by radiation damage, impurities and temperature variations, careful analysis of the data is required. In the nuclear field, materials of direct interest range from carbide-, nitride- and oxide-fuels, to diverse ceramic and glasses utilized for the immobilization of high level nuclear waste, as well as simulated fuels and fuel-rod cladding materials, the later which are tested to analyze the loss of ductility after irradiation and its recovery after high temperature annealing. This paper describes the most common indentation techniques and the essential properties that can be determined by these techniques. A review of the main results obtained by indentation testing in fuels, waste glasses and cladding materials is also provided. (Author)

Utilization technique for advanced nuclear materials database system Data-Free-Way'

Energy Technology Data Exchange (ETDEWEB)

Fujita, Mitsutane; Kurihara, Yutaka; Kinugawa, Junichi; Kitajima, Masahiro; Nagakawa, Josei; Yamamoto, Norikazu; Noda, Tetsuji; Yagi, Koichi; Ono, Akira [National Research Inst. for Metals, Tsukuba, Ibaraki (Japan)

2001-02-01

Four organizations the National Research Institute for Metals (NRIM), the Japan Atomic Energy Research Institute (JAERI), the Japan Nuclear Fuel Cycle Development Institute (JNC) and Japan Science and Technology Incorporation (JST), conducted the 2nd period joint research for the purpose of development of utilization techniques for advanced nuclear materials database system named 'Data-Free-Way' (DFW), to make more useful system to support research and development of the nuclear materials, from FY 1995 to FY 1999. NRIM intended to fill a data system on diffusion and nuclear data by developing utilization technique on diffusion informations of steels and aluminum and nuclear data for materials for its independent system together with participating in fulfil of the DFW. And, NRIM has entered to a project on wide area band circuit application agreed at the G7 by using technologies cultivated by NRIM, to investigate network application technology with the Michigan State University over the sea under cooperation assistant business of JST, to make results on CCT diagram for welding and forecasting of welding heat history accumulated at NRIM for a long term, to perform development of a simulator assisting optimum condition decision of welding. (G.K.)

Application of nuclear analysis techniques in ancient chinese porcelain

International Nuclear Information System (INIS)

Feng Songlin; Xu Qing; Feng Xiangqian; Lei Yong; Cheng Lin; Wang Yanqing

2005-01-01

Ancient ceramic was fired with porcelain clay. It contains various provenance information and age characteristic. It is the scientific foundation of studying Chinese porcelain to analyze and research the ancient ceramic with modern analysis methods. According to the property of nuclear analysis technique, its function and application are discussed. (authors)

Technology transfer of nuclear techniques and nucleonic control systems in the mineral industry

International Nuclear Information System (INIS)

1990-11-01

Among the many beneficial applications of radiation and radioisotopes in industry which are now well established in advanced countries, the applications of nuclear techniques and nucleonic control systems in the mineral industry have great potential for developing Member States. The use of nucleonic on-stream analyzers in the coal industry has resulted in enormous technical and economic benefits in addition to minimization of environmental pollution. Large savings have also resulted from the use of such analyzers in the processing of other minerals. Nuclear borehole logging techniques have demonstrated great potential in oil and gas evaluation. Radiotracer investigations have led to process optimisation and trouble shooting in various stages in ore processing and metallurgy. Though the technical and economic benefits of applications of nuclear techniques in the mineral industry are well recognised, technology transfer in these areas has been hampered by a variety of factors. In order to review the status and trends in nuclear techniques and nucleonic control systems in the mineral industry and the problems and considerations in their technology transfer to developing Member States, the IAEA convened an Advisory Group Meeting in Bombay, India, 15-19 January 1990. The present publication is based on the 7 contributions presented at this meeting. A separate abstract was prepared for each of these papers. Refs, figs and tabs

Applications of nuclear techniques for in vivo body composition studies at Brookhaven National Laboratory

International Nuclear Information System (INIS)

Cohn, S.H.; Ellis, K.J.; Vartsky, D.; Vaswani, A.N.; Wielopolski, L.

1986-01-01

The development and clinical application of a number of nuclear techniques for studying body composition is described. These techniques include delayed neutron activation for the analysis of calcium, phsophorus, sodium and chlorine and prompt-gamma activation for the measurement of nitrogen and cadmium. In addition, the measurement of in vivo iron by nuclear resonance scattering and lead by x-ray fluorescence is described. (author)

Nuclear analytical techniques with neutron beams at the Univ. of Texas at Austin

International Nuclear Information System (INIS)

Uenlue, K.; Wehring, B.W.

1996-01-01

Neutron beams produced by nuclear research reactors can be used for analytical chemical analysis by measuring nuclear radiation produced by neutron capture. Prompt gamma activation analysis (PGAA) and neutron depth profiling (NDP) are two such analytical techniques. For the last three decades, these techniques have been applied at a number of research reactors around the world. Within the last 4 yr, we have developed NDP and PGAA facilities at The University of Texas at Austin research reactor, a 1-MW TRIGA Mark II reactor. Brief descriptions of the facilities and summaries of activities for these analytical techniques at the University of Texas at Austin are provided in this paper

Active Interrogation using Photofission Technique for Nuclear Materials Control and Accountability

Energy Technology Data Exchange (ETDEWEB)

Yang, Haori [Oregon State Univ., Corvallis, OR (United States)

2016-03-31

Innovative systems with increased sensitivity and resolution are in great demand to detect diversion and to prevent misuse in support of nuclear materials management for the U.S. fuel cycle. Nuclear fission is the most important multiplicative process involved in non-destructive active interrogation. This process produces the most easily recognizable signature for nuclear materials. In addition to thermal or high-energy neutrons, high-energy gamma rays can also excite a nucleus and cause fission through a process known as photofission. Electron linear accelerators (linacs) are widely used as the interrogating photon sources for inspection methods involving photofission technique. After photofission reactions, prompt signals are much stronger than the delayed signals, but it is difficult to quantify them in practical measurements. Delayed signals are easily distinguishable from the interrogating radiation. Linac-based, advanced inspection techniques utilizing the delayed signals after photofission have been extensively studied for homeland security applications. Previous research also showed that a unique delayed gamma ray energy spectrum exists for each fissionable isotope. In this work, high-energy delayed γ-rays were demonstrated to be signatures for detection, identification, and quantification of special nuclear materials. Such γ-rays were measured in between linac pulses using independent data acquisition systems. A list-mode system was developed to measure low-energy delayed γ-rays after irradiation. Photofission product yields of ²³⁸U and ²³⁹Pu were determined based on the measured delayed γ-ray spectra. The differential yields of delayed γ-rays were also proven to be able to discriminate nuclear from non-nuclear materials. The measurement outcomes were compared with Monte Carlo simulation results. It was demonstrated that the current available codes have capabilities and limitations in the simulation of photofission process. A two

Active Interrogation using Photofission Technique for Nuclear Materials Control and Accountability

International Nuclear Information System (INIS)

Yang, Haori

2016-01-01

Innovative systems with increased sensitivity and resolution are in great demand to detect diversion and to prevent misuse in support of nuclear materials management for the U.S. fuel cycle. Nuclear fission is the most important multiplicative process involved in non-destructive active interrogation. This process produces the most easily recognizable signature for nuclear materials. In addition to thermal or high-energy neutrons, high-energy gamma rays can also excite a nucleus and cause fission through a process known as photofission. Electron linear accelerators (linacs) are widely used as the interrogating photon sources for inspection methods involving photofission technique. After photofission reactions, prompt signals are much stronger than the delayed signals, but it is difficult to quantify them in practical measurements. Delayed signals are easily distinguishable from the interrogating radiation. Linac-based, advanced inspection techniques utilizing the delayed signals after photofission have been extensively studied for homeland security applications. Previous research also showed that a unique delayed gamma ray energy spectrum exists for each fissionable isotope. In this work, high-energy delayed γ-rays were demonstrated to be signatures for detection, identification, and quantification of special nuclear materials. Such γ-rays were measured in between linac pulses using independent data acquisition systems. A list-mode system was developed to measure low-energy delayed γ-rays after irradiation. Photofission product yields of 238 U and 239 Pu were determined based on the measured delayed γ-ray spectra. The differential yields of delayed γ-rays were also proven to be able to discriminate nuclear from non-nuclear materials. The measurement outcomes were compared with Monte Carlo simulation results. It was demonstrated that the current available codes have capabilities and limitations in the simulation of photofission process. A two-fold approach was

Water in Brain Edema : Observations by the Pulsed Nuclear Magnetic Resonance Technique

NARCIS (Netherlands)

GO, KG; Edzes, HT

The state of water in three types of brain edema and in normal brain of the rat was studied by the pulsed nuclear magnetic resonance (NMR) technique. In cold-induced edema and in osmotic edema both in cortex and in white matter, the water protons have longer nuclear magnetic relaxation times than in

Simplification of Bovine Somatic Cell Nuclear Transfer by Application of a Zona-Free Manipulation Technique

DEFF Research Database (Denmark)

Booth, Paul J; Tan, Shijian; Reipurth, Rikke

2001-01-01

Contemporary nuclear transfer techniques often require the involvement of skilled personnel and extended periods of micromanipulation. Here, we present details of the development of a nuclear transfer technique for somatic cells that is both simpler and faster than traditional methods. The techni......Contemporary nuclear transfer techniques often require the involvement of skilled personnel and extended periods of micromanipulation. Here, we present details of the development of a nuclear transfer technique for somatic cells that is both simpler and faster than traditional methods....... The technique comprises the bisection of zona-free oocytes and the reconstruction of embryos comprising two half cytoplasts and a somatic cell by adherence using phytohaemagglutinin-P (PHA) followed by an electropulse and subsequent culture in microwells (termed WOWs--well of the well). The development......-intact zygotes were not different in either blastocyst yield (44.6 +/- 2.4% versus 51.8 +/- 13.5% [mean +/- SEM]) or quality (126.3 +/- 48.4 versus 119.9 +/- 32.6 total cells), and exposure of zygotes to PHA-P did not reduce blastocyst yields compared to vehicle control (40.8 +/- 11.6% versus 47.1 +/- 20...

Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

International Nuclear Information System (INIS)

1998-01-01

The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised

Proceedings of Fifth International Symposium on Nuclear and Related Techniques NURT 2006

International Nuclear Information System (INIS)

2006-04-01

The Cd-Rom presents papers submitted to the Fifth International Symposium on Nuclear and Related Techniques NURT 2006 held in Havana, Cuba, on April, 2006. The NURT Symposia are one of the key Cuban scientific meetings dealing with the peaceful applications of nuclear techniques in all domains of the society. They are arranged with a two-year frequency and provide a unique opportunity for the international scientific community to meet outstanding researches and to discuss current trends and task in several areas of applied, nuclear related topics. The first editions of the NURT were organized under the auspices of the International Atomic Energy Agency in 1997, 1999, 200, 2003 and hosted delegates and invited scientific from more than 40 countries from all over the world. The join several workshops, each one devoted to an specific field research

The single chip microcomputer technique in an intelligent nuclear instrument

International Nuclear Information System (INIS)

Wang Tieliu; Sun Punan; Wang Ying

1995-01-01

The authors present that how to acquire and process the output signals from the nuclear detector adopting single chip microcomputer technique, including working principles and the designing method of the computer's software and hardware in the single chip microcomputer instrument

Non-Destructive Techniques in the Tacis and Phare Nuclear Safety Programmes

International Nuclear Information System (INIS)

Bieth, Michel

2002-01-01

Decisions regarding the verification of design plant lifetime and potential license renewal periods involve a determination of the component and circuit condition. In Service Inspection of key reactor components becomes a crucial consideration for continued safe plant operation. The determination of the equipment properties by Non Destructive Techniques during periodic intervals is an important aspect of the assessment of fitness-for-service and safe operation of nuclear power plants The Tacis and Phare were established since 1991 by the European Union as support mechanisms through which projects could be identified and addressed satisfactorily. In Nuclear Safety, the countries mainly concerned are Russia, Ukraine, Armenia, and Kazakhstan for the Tacis programme, and Bulgaria, Czech Republic, Hungary, Slovak Republic, Lithuania, Romania and Slovenia for the Phare programme. The Tacis and Phare programs concerning the Nuclear Power Plants consist of: - On Site Assistance and Operational Safety, - Design Safety, - Regulatory Authorities, - Waste management, and are focused on reactor safety issues, contributing to the improvement in the safety of East European reactors and providing technology and safety culture transfer. The main parts of these programmes are related to the On-Site Assistance and to the Design Safety of VVER and RBMK Nuclear power plants where Non Destructive Techniques for In Service Inspection of the primary circuit components are addressed. (authors)

An investigation of tantalum and niobium contents by nuclear technique

International Nuclear Information System (INIS)

Patmasiriwat, N.

1981-01-01

The objective of this experimental study was to find suitable nuclear techniques to determine the quantities of niobium and tantalum in columbite. The study has been performed by using radioisotope X-ray fluorescent technique (X RF) and neutron activation analysis (NAA). The results showed a good agreement between these two techniques. Nevertheless, with NAA, if there is uranium in the sample, the spectrum of niobium will be interfered. So practically, on the basis of accuracy and speed of determination, X-ray fluorescence is more suitable than NAA to determine the quantity of niobium while tantalum is preferable to use NAA. The detection limit of niobium and tantalum using the above techniques are 0.661% and 0.1 mg respectively

Application of acoustic emission, as non destructive testing technique, to nuclear components inspection

International Nuclear Information System (INIS)

Sanchez Miro, J.J.

1980-01-01

A panorama of actual state of acoustic emission as non destructive testing technique, from stand point of its safety applications to nuclear reactor is offered. In first place the physic grounds of acoustic emission phenomenon is briefly exposed. After we speak about the experimental methods for detection, and overall is made an explanation of the problems which are found during the application of this technology to on-line inspection of nuclear oower plants. It is hoped that this repport makes a contribution in the sense of to create a favourable atmosphere toward the introduction in our country of this important technique, and concretely within the nuclear power industry. In this last field the employ of acoustic emission is overcoming the experimental stage. (author)

Status and trends in nuclear techniques in the mineral industry in India

International Nuclear Information System (INIS)

Eapen, A.C.; Rao, S.M.; Murthy, T.S.

1991-01-01

The status and use of nuclear techniques in the various parts of the mineral industry in India are reviewed. The techniques and applications include nucleonic level control in ore hoppers; radiometric density gauges; coal ash monitoring using x-ray backscattering; mineral analysis by x-ray fluorescence and radioisotope analysis; neutron and gamma logging of oil wells; radiotracer techniques in bauxite processing and in the oil industry. (UK)

Measurement and instrumentation techniques for monitoring plutonium and uranium particulates released from nuclear facilities

International Nuclear Information System (INIS)

Nero, A.V. Jr.

1976-08-01

The purpose of this work has been an analysis and evaluation of the state-of-the-art of measurement and instrumentation techniques for monitoring plutonium and uranium particulates released from nuclear facilities. The occurrence of plutonium and uranium in the nuclear fuel cycle, the corresponding potential for releases, associated radiological protection standards and monitoring objectives are discussed. Techniques for monitoring via decay radiation from plutonium and uranium isotopes are presented in detail, emphasizing air monitoring, but also including soil sampling and survey methods. Additionally, activation and mass measurement techniques are discussed. The availability and prevalence of these various techniques are summarized. Finally, possible improvements in monitoring capabilities due to alterations in instrumentation, data analysis, or programs are presented

Development of recycling techniques for nuclear power plant decommissioning waste

International Nuclear Information System (INIS)

Ishikura, Takeshi; Oguri, Daiichiro; Abe, Seiji; Ohnishi, Kazuhiko

2003-01-01

Recycling of concrete and metal waste will provide solution to reduce waste volume, contributing to save the natural resources and to protect the environment. Nuclear Power Engineering Corporation has developed techniques of concrete and metal recycling for decommissioning waste of commercial nuclear power plants. A process of radioactive concrete usage for mortar solidification was seen to reduce concrete waste volume by 2/3. A concrete reclamation process for high quality aggregate was confirmed that the reclaimed aggregate concrete is equivalent to ordinary concrete. Its byproduct powder was seen to be utilized various usage. A process of waste metal casting to use radioactive metal as filler could substantially decrease the waste metal volume when thinner containers are applied. A pyro-metallurgical separation process was seen to decrease cobalt concentration by 1/100. Some of these techniques are finished of demonstration tests for future decommissioning activity. (author)

Synthesis and characterization of metallic nuclear fuels; Sintese e caracterizacao de combustiveis nucleares metalicos

Energy Technology Data Exchange (ETDEWEB)

Longen, F.R., E-mail: frlongen@utfpr.edu.br [Universidade Tecnologica Federal do Parana (UTFPR), Medianeira, PR (Brazil); Barco, R.; Paesano Junior, A. [Universidade Estadual de Maringa (UEM), PR (Brazil); Pagano Junior, L. [Centro Tecnologico da Marinha (CETEM), Sao Paulo, SP (Brazil)

2014-07-01

U-Zr-Mo and U-Zr-Gd ternary alloys, potentially useful as metallic nuclear fuel, were prepared at different concentrations by arc-melting and characterized by X-ray diffraction. Those alloys containing molybdenum were submitted to thermal annealing in inert atmosphere, followed by quenching in water. These samples were measured before and after the thermal treatment. The diffractometric results evidenced that the as-cast alloys solidified mostly with a body centered cubic structure (γphase) and that for the uranium richest samples a second phase formed, with an orthorhombic structure (α phase). For the U-Zr-Gd alloys the X-ray diffractometry revealed the retention of a hexagonal structure (δ phase) and gadolinium traces in the poorest uranium samples. The U{sub 57}(Zr{sub 92}Gd{sub 8}){sub 43} sample resulted monophasic becoming, according to literature, the first time that a solid solution combining uranium and gadolinium is identified. (author)

Applications of radiations, radioisotopes and nuclear techniques in biotechnology

International Nuclear Information System (INIS)

Bhatia, C.R.

1994-01-01

Applications of radiations, radioisotopes and other nuclear techniques has contributed a great deal in our understanding of microbial plant and animal biochemistry and molecular biology. Electron microscopy has provided visual evidence for molecular events. Developments in cell tissue culture of both plants and animals and immunology have contributed to advances in what we now refer as biotechnology. This paper focuses on the applications in the high-tech end of biotechnology, limited to the use of recombinant-DNA techniques. Molecular identification of the genes, their cloning and horizontal transfer across the species of microbes, plants and animals and expression of the transferred genes is the major strength of modern biotechnology. The techniques described in this paper have played a significant role in the development of biotechnology. 6 refs

Enhancement of crack detection in stud bolts of nuclear reactor by ultrasonic technique

International Nuclear Information System (INIS)

Lee, Joon-Hyun; Choi, Sang-Woo; Oh, Won-Deok

2004-01-01

The stud bolt is one of crucial parts for safety of reactor vessels in nuclear power plants. Crack initiation and propagation were reported in stud bolts using closure of reactor vessel and head. Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure and radioactive leakage from nuclear reactor. In conventional ultrasonic testing for inspection of stud bolts, crack was detected by using shadow effect. It takes too much time to inspect stud bolt by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread. In this study, the signal processing technique for enhancing conventional ultrasonic technique and the advanced ultrasonic phased array technique were introduced for inspect stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. The phased array technique provides fast inspection and can be applied for structure of complex shape. There are sector scanning and linear scanning methods in phased array technique, and these scanning methods were applied to inspect stud bolt and detectability was investigated. (author)

A novel experimental technique of nuclear lifetime measurements

International Nuclear Information System (INIS)

Yuminov, O.A.; D'Arrigo, A.; Giardina, G.; Taccone, A.; Vannini, G.; Moroni, A.; Ricci, R.A.; Vannucci, L.

1995-01-01

In the present paper a new experimental method to measure nuclear reaction time in the 10 -15 -10 -10 s region is presented. Measurements of the lifetimes of low-lying and long-lived states of 19 F and 20 Ne decaying via α-channel were carried out with the aim of checking the feasibility of the method. The results obtained in this way are compared with the lifetimes known from different techniques. ((orig.))

Nuclear techniques for a cleaner environment

International Nuclear Information System (INIS)

1995-01-01

Highlights of the major IAEA programme for nuclear techniques and research which have direct contribution towards improvement of the environment are presented. These include topics in the areas of food and agriculture, hydrology, environmental monitoring, and marine sciences. Joint IAEA and FAO programmes in food and agriculture covers topics such as: control of insects and pests, monitoring of pesticides in ecosystem and food irradiation. In hydrology, development and management of water resources, water pollution assessment, cleaning of flue gases and sewage sludge, etc are being undertaken primarily in developing countries. Environmental monitoring is conducted with particular emphasis to when there is an accidental release of radioactivity into the environment, as happened to the Chernobyl accident

Da Lat Nuclear Research Reactor. Role and perspective in the development of radioisotope and nuclear technique application in Vietnam

International Nuclear Information System (INIS)

Tran Ha Anh; Tran Khac An; Ngo Phu Khang; Nguyen Mong Sinh

1995-01-01

The Da Lat Nuclear Research Reactor is playing a central role in the development of both the Nuclear Research Institute and nuclear application in our country. Thanks to this main scientific tool, the Nuclear Research Institute nearly 10 years after the completion of its renovation from the previous American-made TRIGA MARK 2 reactor is being able to implement numerous scientific and technological research projects and to develop significant applications of radioisotopes and various nuclear techniques. A general overview of the research and development activities of the Institute based on the Da Lat Nuclear Research Reactor is given as well as those aiming at ensuring its safe, reliable and efficient operation and at enlarging the perspectives of its utilisation in the future. (authors). 5 refs., 1 fig., 1 tab

Determination of palladium in biological samples applying nuclear analytical techniques

International Nuclear Information System (INIS)

Cavalcante, Cassio Q.; Sato, Ivone M.; Salvador, Vera L. R.; Saiki, Mitiko

2008-01-01

This study presents Pd determinations in bovine tissue samples containing palladium prepared in the laboratory, and CCQM-P63 automotive catalyst materials of the Proficiency Test, using instrumental thermal and epithermal neutron activation analysis and energy dispersive X-ray fluorescence techniques. Solvent extraction and solid phase extraction procedures were also applied to separate Pd from interfering elements before the irradiation in the nuclear reactor. The results obtained by different techniques were compared against each other to examine sensitivity, precision and accuracy. (author)

Application perspectives of simulation techniques CFD in nuclear power plants

International Nuclear Information System (INIS)

Galindo G, I. F.

2013-10-01

The scenarios simulation in nuclear power plants is usually carried out with system codes that are based on concentrated parameters networks. However situations exist in some components where the flow is predominantly 3-D, as they are the natural circulation, mixed and stratification phenomena. The simulation techniques of computational fluid dynamics (CFD) have the potential to simulate these flows numerically. The use of CFD simulations embraces many branches of the engineering and continues growing, however, in relation to its application with respect to the problems related with the safety in nuclear power plants, has a smaller development, although is accelerating quickly and is expected that in the future they play a more emphasized paper in the analyses. A main obstacle to be able to achieve a general acceptance of the CFD is that the simulations should have very complete validation studies, sometimes not available. In this article a general panorama of the state of the methods application CFD in nuclear power plants is presented and the problem associated to its routine application and acceptance, including the view point of the regulatory authorities. Application examples are revised in those that the CFD offers real benefits and are also presented two illustrative study cases of the application of CFD techniques. The case of a water recipient with a heat source in its interior, similar to spent fuel pool of a nuclear power plant is presented firstly; and later the case of the Boron dilution of a water volume that enters to a nuclear reactor is presented. We can conclude that the CFD technology represents a very important opportunity to improve the phenomena understanding with a strong component 3-D and to contribute in the uncertainty reduction. (Author)

USB technique and its application in nuclear instruments

International Nuclear Information System (INIS)

Zhou Tong; Wei Yixiang; Wang Yuemin

2001-01-01

This paper introduces the technique of communication of USB between computer and collection interface in nuclear instruments. Because Universal Serial Bus has many advantages such as high speed, low energy consuming and Plug and Play. It has been a universal interface of computer. The realization of communication by USB is a step to digital, modularization, and universality of instruments. The mainly content of this paper is the design of circuit and program of the USB intelligent interface, which include how to program a driver and how the software and the hardware interplay with each other. At the end, a testing result in a Multi-Channel Analyzer also is presented. This technique can also be used in other data acquisition instruments

Fabrication and Characterization of Surrogate Glasses Aimed to Validate Nuclear Forensic Techniques

Science.gov (United States)

2017-12-01

the glass formed during a nuclear event, trinitite [14]. The SiO2 composition is generally greater than 50% for trinitite and can vary appreciably...CHARACTERIZATION OF SURROGATE GLASSES AIMED TO VALIDATE NUCLEAR FORENSIC TECHNIQUES by Ken G. Foos December 2017 Thesis Advisor: Claudia...December 2017 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE FABRICATION AND CHARACTERIZATION OF SURROGATE GLASSES AIMED TO

Calculational techniques for estimating population doses from radioactivity in natural gas from nuclearly stimulated wells

International Nuclear Information System (INIS)

Barton, C.J.; Moore, R.E.; Rohwer, P.S.; Kaye, S.V.

1975-01-01

Techniques for estimating radiation doses from exposure to combustion products of natural gas obtained from wells created by use of nuclear explosives were first developed in the Gasbuggy Project. These techniques were refined and extended by development of a number of computer codes in studies related to the Rulison Project, the second in the series of joint government-industry efforts to demonstrate the feasibility of increasing natural gas production from low-permeability rock formations by use of nuclear explosives. These techniques are described and dose estimates that illustrate their use are given. These dose estimation studies have been primarily theoretical, but we have tried to make our hypothetical exposure conditions correspond as closely as possible with conditions that could exist if nuclearly stimulated natural gas is used commercially. (author)

APLICACIONES CLÍNICAS DE LAS TÉCNICAS NUCLEARES EN EL ESTUDIO DEL SINCRONISMO VENTRICULAR / Clinical applications of nuclear techniques in the study of ventricular synchronism

Directory of Open Access Journals (Sweden)

Amalia Peix González

2012-07-01

Full Text Available ResumenTécnicas incruentas como la ecocardiografía, la resonancia magnética nuclear y los estudios de Medicina Nuclear (ventriculografía radioisotópica y gammagrafía de perfusión miocárdica con tomografía de emisión de fotón único, proporcionan información indirecta sobre el sincronismo ventricular cuando se utilizan parámetros de contractilidad mecánica. El análisis de fase de Fourier es un instrumento útil para el empleo de técnicas nucleares con este propósito y se ha aplicado, tanto en la ventriculografía radioisotópica como en la gammagrafía de perfusión. En este trabajo se presenta una revisión en el tiempo de los fundamentos y aplicaciones clínicas de las técnicas nucleares en el estudio del sincronismo ventricular. En la actualidad es la gammagrafía SPECT-gatillada, dentro de las técnicas nucleares, la más utilizada, por la posibilidad que ofrece de evaluar perfusión, función y sincronismo intraventricular en el mismo examen. / AbstractNoninvasive techniques such as echocardiography, nuclear magnetic resonance imaging and nuclear medicine studies (radionuclide ventriculography and myocardial perfusion scintigraphy with single photon emission tomography, provide indirect information about ventricular synchronism when parameters of mechanical contractility are used. The Fourier phase analysis is a useful tool for the use of nuclear techniques for this purpose, and has been applied in both radionuclide ventriculography and perfusion scintigraphy. A review in time of the basics and clinical applications of nuclear techniques in the study of ventricular synchronism is presented in this article. Nowadays, the gated-SPECT scintigraphy is the most common among nuclear techniques because it allows assessing perfusion, function, and intraventricular synchronism in the same test.

Current trends in nuclear borehole logging techniques for elemental analysis

International Nuclear Information System (INIS)

1988-06-01

This report is the result of a consultants' meeting organized by the IAEA and held in Ottawa, Canada, 2-6 November 1987 in order to assess the present technical status of nuclear borehole logging techniques, to find out the well established applications and the development trends. It contains a summary report giving a comprehensive overview of the techniques and applications and a collection of research papers describing work done in industrial institutes. A separate abstract was prepared for each of these 9 papers. Refs, figs and tabs

Learning-curve estimation techniques for nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Vaurio, J.K.

1983-01-01

Statistical techniques are developed to estimate the progress made by the nuclear industry in learning to prevent accidents. Learning curves are derived for accident occurrence rates based on acturial data, predictions are made for the future, and compact analytical equations are obtained for the statistical accuracies of the estimates. Both maximum likelihood estimation and the method of moments are applied to obtain parameters for the learning models, and results are compared to each other and to earlier graphical and analytical results. An effective statistical test is also derived to assess the significance of trends. The models used associate learning directly to accidents, to the number of plants and to the cumulative number of operating years. Using as a data base nine core damage accidents in electricity-producing plants, it is estimated that the probability of a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year.

Learning-curve estimation techniques for nuclear industry

International Nuclear Information System (INIS)

Vaurio, J.K.

1983-01-01

Statistical techniques are developed to estimate the progress made by the nuclear industry in learning to prevent accidents. Learning curves are derived for accident occurrence rates based on acturial data, predictions are made for the future, and compact analytical equations are obtained for the statistical accuracies of the estimates. Both maximum likelihood estimation and the method of moments are applied to obtain parameters for the learning models, and results are compared to each other and to earlier graphical and analytical results. An effective statistical test is also derived to assess the significance of trends. The models used associate learning directly to accidents, to the number of plants and to the cumulative number of operating years. Using as a data base nine core damage accidents in electricity-producing plants, it is estimated that the probability of a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year

Learning curve estimation techniques for nuclear industry

International Nuclear Information System (INIS)

Vaurio, Jussi K.

1983-01-01

Statistical techniques are developed to estimate the progress made by the nuclear industry in learning to prevent accidents. Learning curves are derived for accident occurrence rates based on actuarial data, predictions are made for the future, and compact analytical equations are obtained for the statistical accuracies of the estimates. Both maximum likelihood estimation and the method of moments are applied to obtain parameters for the learning models, and results are compared to each other and to earlier graphical and analytical results. An effective statistical test is also derived to assess the significance of trends. The models used associate learning directly to accidents, to the number of plants and to the cumulative number of operating years. Using as a data base nine core damage accidents in electricity-producing plants, it is estimated that the probability of a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year

Nuclear and related techniques in animal production and health

International Nuclear Information System (INIS)

1986-01-01

The international symposium was attended by about 130 participants from 45 countries and included 83 scientific presentations of which 42 were posters. This volume covers four principal and interrelated topics: adaptation of animals to the environment, and animal reproduction, health and nutrition. Within each topic, consideration is given to those nuclear and related techniques currently employed in investigative research and their usefulness in studying animal production systems. Progress towards new areas of application and new techniques is also covered, particularly the development and practicability of immunoassay and related biotechnological methods for the diagnosis of livestock diseases. A separate abstract was prepared for each of the papers in this volume

Advanced instrumentation and control techniques for nuclear power plants

International Nuclear Information System (INIS)

Hayakawa, Hiroyasu; Makino, Maomi

1989-01-01

Toshiba has been promoting the development and improvement of control and instrumentation (C and I) systems employing the latest technologies, to fulfill the requirements of nuclear power plants for increased reliability, the upgrading of functions, improved maintainability, and reasonable cost. Such development has been systematically performed based on a schematic view of integrated digital control and instrumentation systems, actively adopting state-of-the-art techniques such as the latest man-machine interfaces, digital and optical multiplexing techniques, and artificial intelligence. In addition, comprehensive feedback has been obtained from the accumulation of operating experience. This paper describes the purpose, contents and status of applications of representative newly-developed systems. (author)

Assessment of endocrine disorders of the hypothalamic-pituitary axis by nuclear medicine techniques

International Nuclear Information System (INIS)

Schmidt, M.; Theissen, P.; Dietlein, M.; Schicha, H.; Jackenhoevel, F.; Krone, W.

2002-01-01

The following article reviews nuclear medicine techniques which can be used for assessment of endocrine disorders of the hypothalamic-pituitary axis. For planar and SPECT imaging somatostatin-receptor- and dopamine-D2-receptor-scintigraphy are the most widely distributed techniques. These nuclear medicine techniques may be indicated in selected cases to answer differential diagnostic problems. They can be helpful to search for presence and localization of receptor positive tissue. Furthermore they can detect metastasis in the rare cases of a pituitary carcinoma. Scintigraphy with Gallium-67 is suitable for further diagnostic evaluation in suspected hypophysitis. Other SPECT radiopharmaca do not have relevant clinical significance. F-18-FDG as PET radiopharmacon is not ideal because obvious pituitary adenomas could not be visualized. Other PET radiopharmaca including C-11-methionine, C-11-tyrosine, F-18-fluoroethylspiperone, C-11-methylspiperone, and C-11-raclopride are available in specialized centers only. Overall indications for nuclear medicine in studies for the assessment of endocrine disorders of the hypothalamic-pituitary-axis are rare. Original studies often report only about a small number of patients. According to the authors' opinion the relevance of nuclear medicine in studies of clinically important endocrinologic fields, e. g. localization of small ACTH-producing pituitary adenomas, tumor localization in ectopic ACTH syndrome, localization of recurrent pituitary tissue, assessment of small incidentalomas, can not be definitely given yet. (orig.) [de

Nuclear techniques in oil and gas exploration and production

International Nuclear Information System (INIS)

Caldwell, R.L.; Mills, W.R. Jr.; Orr, W.L.; Allen, L.S.

1977-01-01

A review is given of some of the most significant new developments that have occurred during the past three years in the area of nuclear techniques applied to the exploration for and production of oil and gas deposits. Experimental and theoretical studies have been carried out aimed at improving pulsed neutron logging tools and upgrading interpretation of data from such tools. Pulsed neutron borehole generators and gamma-ray spectroscopy have been combined in carbon/oxygen logging to provide a means of determining formation oil saturation in cased holes that is independent of water salinity. Use of pulsed neutron logs in the log-inject-log technique has been tested and evaluated in several field studies. The combination of a gamma-gamma density log and a borehole gravimeter has been used to detect economically important gas accumulations at distances from a borehole that are well beyond the depth of investigation of conventional logging techniques. The depths of investigation of several commercial nuclear logging tools have been studied in laboratory investigations. Possible geological applications of natural gamma-ray spectral logs have been investigated through the study of large sample suites and in specific field applications. The extensive use of digital recording of logging data and well-site analysis by minicomputer are expected to have a significant influence on future logging programmes and logging sonde designs. The present status of stable isotope geochemistry and radioactive tracer surveys is reviewed. (author)

A Toast to Good Health: IAEA Promotes Nuclear Techniques

International Nuclear Information System (INIS)

Henriques, Sasha

2013-01-01

The IAEA promotes the use of nuclear techniques to help Member States achieve the Millennium Development Goals (MDGs) by training scientists, providing experts, and helping to fund the purchase of essential equipment. The Agency focuses its nutrition efforts on MDG 4 reduce child mortality, MDG 5 improve maternal health, MDG 6 combat HIV/AIDS malaria and other diseases, and MDG 8 global partnership for development

Preliminary Study of Meteorite and Tektite using Nuclear Techniques

International Nuclear Information System (INIS)

Khaweerat, Sasiphan; Tangpitayakul, Pisarn; Pimjun, Surapong; Chongkum, Somporn; Sangsuriya, Sineenart; Wiseatsri, Pojanee

2003-06-01

The discoveries of suspicious meteorite or tektite around Chaiyapum province and surrounding area were sent to Physics Division, Office of Atoms for Peace (OAP). Fourteen samples were analyzed by 3 nuclear techniques; the measurement of natural radiation, x-ray fluorescence analysis and neutron activation analysis. The result shows that the samples can be classified according to the level of natural radiation, the elemental composition and there quantity

Applications of nuclear technique in environmental and medical science

International Nuclear Information System (INIS)

Shi Xianfeng; Shen Hao; Liu Bo; Sun Minde; Yao Huiying; Zhou Shijun; Mi Yong

2001-01-01

The serious environmental pollution problem and application of the nuclear technique in environmental and medical sciences were discussed. The analysed results of the elemental distribution of particles in automobile exhaust, the aerosol particle of different size and the effect of Rare Earth on cells were reported. The authors can obtain some information related to element concentration. It offers a convenient method in inspecting the environmental pollution

Marine pollution studies in Pakistan by nuclear techniques

International Nuclear Information System (INIS)

Qureshi, R.M.; Mashiatullah, A.; Javed, T.; Tasneem, M.A.

2001-01-01

This paper describes a comprehensive study on pollution aspects of Manora Channel-Karachi Coast, Pakistan. In addition to use of conventional non-nuclear pollution monitoring tools (Coliform population, electrical conductivity, turbidity etc.), we evaluate the role of environmental stable carbon isotope technique (delta /sup 13/C of the total dissolved inorganic carbon-TDIC) to establish marine pollution transport scenario for Manora Channel. Data shows that tidal fluctuations play a key role in distribution of contamination inventories in Manora Channel. (author)

Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

International Nuclear Information System (INIS)

2005-01-01

The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

Deposition techniques for the preparation of thin film nuclear targets

International Nuclear Information System (INIS)

Muggleton, A.H.F.

1987-07-01

This review commences with a brief description of the basic principles that regulate vacuum evaporation and the physical processes involved in thin film formation, followed by a description of the experimental methods used. The principle methods of heating the evaporant are detailed and the means of measuring and controlling the film thickness are elucidated. Types of thin film nuclear targets are considered and various film release agents are listed. Thin film nuclear target behaviour under ion-bombardment is described and the dependence of nuclear experimental results upon target thickness and uniformity is outlined. Special problems associated with preparing suitable targets for lifetime measurements are discussed. The causes of stripper-foil thickening and breaking under heavy-ion bombardment are considered. A comparison is made between foils manufactured by a glow discharge process and those produced by vacuum sublimation. Consideration is given to the methods of carbon stripper-foil manufacture and to the characteristics of stripper-foil lifetimes are considered. Techniques are described that have been developed for the fabrication of special targets, both from natural and isotopically enriched material, and also of elements that are either chemically unstable, or thermally unstable under irradiation. The reduction of metal oxides by the use of hydrogen or by utilising a metallothermic technique, and the simultaneous evaporation of reduced rare earth elements is described. A comprehensive list of the common targets is presented

Determination of Nuclear Track Parameters for LR-115 Detector by Using of MATLAB Software Technique

International Nuclear Information System (INIS)

AL-Jomaily, F.M.; AL-joburi, H.A.; Mheemeed, A.K.

2013-01-01

The nuclear track detector parameters, such as nuclear track diameter D(μm), number of track N T and area of track A T were determined by using MATLAB software technique for IR-115 detector irradiated by alpha particle from 241 Am source under 1.5, 2.5 and 3.5 MeV at etching time T B of 90, 120, 150 and 180 min.By using the image analysis of MATLAB software for nuclear track, the full width at half maximum FWHM and relative resolution R% were calculated for each energy of alpha particles.In this study, it was shown that increasing the alpha energy on the IR-115 detector leads to increased etching time T B and the dropping of R% to minimum value, and then reach a stable value before dropping at values 1.5, 2.5 MeV and unstable at 3.5 MeV. Imaging analysis by MATLAB technique which used in this study reflect good and accurate results for nuclear track detector parameters and we recommend using this technique for determination of these parameters

The role of nuclear techniques in the control of agricultural pests and stored grains insects

International Nuclear Information System (INIS)

Mansour, M.

2012-01-01

Peaceful applications of nuclear techniques in agriculture in general, and pest control specifically, are very numerous. Although this field of science is over a century old, its rapid developments occurred only in the last few decades. In fact, the contribution of nuclear techniques to insect pest control during the last half century is one of the most important developments in this science. This article is devoted to discuss the most important and widely used applications of nuclear techniques, particularly ionizing radiation, in insect pest control. In particular, it deals with the subject of sterilizing insects for the purpose of insect pest control and/or eradication in the field and storage, irradiation disinfestation of sorted products, particularly cereals and pulses, facilitating international trade by avoiding quarantine barriers and its role in biological control of insect pests. (author)

Quality system implementation for nuclear analytical techniques

International Nuclear Information System (INIS)

2004-01-01

techniques. The methodology provided is appropriate for: (a) Analysis of radionuclides as in alpha, beta, and gamma spectrometry for environmental and human-made radioactivity investigations; (b) Analysis of trace, minor and major elements using nuclear and related analytical techniques such as neutron activation analysis, X ray fluorescence, PIXE, etc. This training guidebook can be used by staff of analytical laboratories as a starting kit to better understand the quality assurance and quality control principles as prescribed in the ISO 17025 standard. It follows a logical order related to practical laboratory work rather than the formal clauses as given by the standard. It can be used as a stand alone textbook. However, in some cases, cross-reference is given to the ISO 17025 clauses hence it is recommended to consult the ISO standard for exact wording of specific requirements

Robust techniques for polarization and detection of nuclear spin ensembles

Science.gov (United States)

Scheuer, Jochen; Schwartz, Ilai; Müller, Samuel; Chen, Qiong; Dhand, Ish; Plenio, Martin B.; Naydenov, Boris; Jelezko, Fedor

2017-11-01

Highly sensitive nuclear spin detection is crucial in many scientific areas including nuclear magnetic resonance spectroscopy, magnetic resonance imaging (MRI), and quantum computing. The tiny thermal nuclear spin polarization represents a major obstacle towards this goal which may be overcome by dynamic nuclear spin polarization (DNP) methods. The latter often rely on the transfer of the thermally polarized electron spins to nearby nuclear spins, which is limited by the Boltzmann distribution of the former. Here we utilize microwave dressed states to transfer the high (>92 % ) nonequilibrium electron spin polarization of a single nitrogen-vacancy center (NV) induced by short laser pulses to the surrounding 13C carbon nuclear spins. The NV is repeatedly repolarized optically, thus providing an effectively infinite polarization reservoir. A saturation of the polarization of the nearby nuclear spins is achieved, which is confirmed by the decay of the polarization transfer signal and shows an excellent agreement with theoretical simulations. Hereby we introduce the polarization readout by polarization inversion method as a quantitative magnetization measure of the nuclear spin bath, which allows us to observe by ensemble averaging macroscopically hidden polarization dynamics like Landau-Zener-Stückelberg oscillations. Moreover, we show that using the integrated solid effect both for single- and double-quantum transitions nuclear spin polarization can be achieved even when the static magnetic field is not aligned along the NV's crystal axis. This opens a path for the application of our DNP technique to spins in and outside of nanodiamonds, enabling their application as MRI tracers. Furthermore, the methods reported here can be applied to other solid state systems where a central electron spin is coupled to a nuclear spin bath, e.g., phosphor donors in silicon and color centers in silicon carbide.

Imaging nuclear medicine techniques for diagnostic evaluation of arterial hypertension

International Nuclear Information System (INIS)

Eisenberg, B.M.; Linss, G.

1989-01-01

Arterial hypertension may be caused by a malfunction of organs and in turn may lead to secondary organic lesions. Modern diagnostic nuclear medicine is applied for function studies in order to detect or exclude secondary hypertension and functional or perfusion disturbances due to hypertension, or to assess and follow up hemodynamic conditions and cardiac functions prior to and during therapy. The article presents a survey of imaging diagnostic nuclear medicine techniques for the eamination of the heart, the brain, the kidneys and endocrine glands in patients with arterial hypertension, discussing the methods with a view to obtainable information, limits of detection, and indications. (orig.) [de

Applications of nuclear techniques for in vivo body composition studies at Brookhaven National Laboratory

International Nuclear Information System (INIS)

Cohn, S.H.; Ellis, K.J.; Vartsky, D.; Vaswani, A.N.; Wielopolski, L.

1981-01-01

A series of technical developments and their clinical applications in various nuclear technologies at Brookhaven National Laboratory is described. These include the development of a portable neutron activation facility for measuring cadmium in vivo in kidney and liver, a technique for the measurement of body iron utilizing nuclear resonant scattering of gamma rays, a non-invasive measure of the skeletal levels of lead by an x-ray fluorescence technique, and the development of a pulsed Van de Graaff generator as a source of pulsed neutrons for the measurement of lung silicon

Applications of nuclear techniques for in vivo body composition studies at Brookhaven National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Cohn, S.H.; Ellis, K.J.; Vartsky, D.; Vaswani, A.N.; Wielopolski, L.

1981-01-01

A series of technical developments and their clinical applications in various nuclear technologies at Brookhaven National Laboratory is described. These include the development of a portable neutron activation facility for measuring cadmium in vivo in kidney and liver, a technique for the measurement of body iron utilizing nuclear resonant scattering of gamma rays, a non-invasive measure of the skeletal levels of lead by an x-ray fluorescence technique, and the development of a pulsed Van de Graaff generator as a source of pulsed neutrons for the measurement of lung silicon. (ACR)

Development of object-oriented software technique in field of high energy and nuclear physics

International Nuclear Information System (INIS)

Ye Yanlin; Ying Jun; Chen Tao

1997-01-01

The background for developing object-oriented software technique in high energy and nuclear physics has been introduced. The progress made at CERN and US has been outlined. The merit and future of various software techniques have been commented

Novel nuclear magnetic resonance techniques for studying biological molecules

International Nuclear Information System (INIS)

Laws, David D.

2000-01-01

Over the fifty-five year history of Nuclear Magnetic Resonance (NMR), considerable progress has been made in the development of techniques for studying the structure, function, and dynamics of biological molecules. The majority of this research has involved the development of multi-dimensional NMR experiments for studying molecules in solution, although in recent years a number of groups have begun to explore NMR methods for studying biological systems in the solid-state. Despite this new effort, a need still exists for the development of techniques that improve sensitivity, maximize information, and take advantage of all the NMR interactions available in biological molecules. In this dissertation, a variety of novel NMR techniques for studying biomolecules are discussed. A method for determining backbone (φ/ψ) dihedral angles by comparing experimentally determined 13 C a , chemical-shift anisotropies with theoretical calculations is presented, along with a brief description of the theory behind chemical-shift computation in proteins and peptides. The utility of the Spin-Polarization Induced Nuclear Overhauser Effect (SPINOE) to selectively enhance NMR signals in solution is examined in a variety of systems, as are methods for extracting structural information from cross-relaxation rates that can be measured in SPINOE experiments. Techniques for the production of supercritical and liquid laser-polarized xenon are discussed, as well as the prospects for using optically pumped xenon as a polarizing solvent. In addition, a detailed study of the structure of PrP 89-143 is presented. PrP 89-143 is a 54 residue fragment of the prion proteins which, upon mutation and aggregation, can induce prion diseases in transgenic mice. Whereas the structure of the wild-type PrP 89-143 is a generally unstructured mixture of α-helical and β-sheet conformers in the solid state, the aggregates formed from the PrP 89-143 mutants appear to be mostly β-sheet.

Case study: Proposed application of project management techniques for construction of nuclear power plant in Malaysia

International Nuclear Information System (INIS)

Syahirah Abdul Rahman; Phongsakorn Prak Tom; Wan Abd Hadi Wan Abu Bakar; Shaharum Ramli

2010-01-01

This study discusses the techniques of project management for the construction of nuclear power plants that can be used in Malaysia. Nuclear power reactors are expected to apply is the categories of Gen III + reactor where it is safer and more modern than the first generation of reactors built in the 1970s. The objective of this study is that the construction of this reactor to be completed by the stipulated time and not exceed the cost estimates. In addition, project management is also able to meet all the specifications and achieve the quality standard. In this study, the techniques used in project management to ensure the success of construction projects of nuclear power plants are a Gantt Chart, CPM/ PERT and Microsoft Project. From the study, found that these techniques can assist in facilitating the management of the project for the construction of nuclear power plants to ensure that the estimated time and cost can be managed more effectively as well as quality of care. (author)

Characterization of aerosols containing radiopharmaceuticals

International Nuclear Information System (INIS)

Cunha, Kenya Dias da; Santos, Maristela Souza

2008-01-01

The objective of this study is to present the main lines of action of the Laboratorio de Caracterizacao de Aerossois (LCA /IRD) in the study of aerosols, the techniques available and the capability of these techniques as a tool in the biokinetics behavior study of radiopharmaceuticals and evaluating the particle exposed individuals containing these molecules. The LCA provides the following analytical techniques: spectrometry alpha, gamma and alpha counting and gross beta; PIXE (Particle Induced X rays Emission) and mass spectrometry-based flight time measurement of molecular ions ( 252 Cf-PDMS - 252 Cf-Plasma Desorption Mass Spectrometry). This technique is used to identify compounds mass to 10 000 a.m.u. The combination of these techniques has been applied to the study in vitro of the toxicology of the metals and radionuclides both in the respiratory tract as in the gastrointestinal

Meteorological requirements and operational fallout prediction techniques for Plowshare nuclear detonations

International Nuclear Information System (INIS)

Mueller, H.F.

1969-01-01

Meteorological support requirements for Plowshare nuclear detonations are shown to depend on a number of factors. The importance of adequate support to the effective planning and safe conduct of a nuclear detonation is described. An example of the influence of atmospheric conditions on radioactive cloud development and local transport and fallout of radioactive debris is presented. Prediction of the future state of atmospheric wind structure, required for fallout predictions depends on an adequate definition of its initial state and its rate of change. This definition, in turn, is shown to depend on an upper wind-sounding network of appropriate station density. An operational technique currently used for nuclear cratering fallout predictions is described and shown to produce results of useful accuracy. (author)

Monitoring of Corrientes facility using nuclear registers techniques

International Nuclear Information System (INIS)

Yesquen L, S.

1994-01-01

Knowledge of fluid movement in the reservoir is a key to enhanced production management. Direct measurement of water and oil saturation variations with time, is the most reliable method in determining the depletion profile of reservoirs with ample range of permeabilities. This paper illustrates how nuclear logging techniques aids proper management in strong water drive reservoir named Cetico Corrientes Field, in east Peru. Important production increase was obtained with work over and drilling program, based on reservoir monitoring using thermal decay tool. (author). 7 figs

Meteorological requirements and operational fallout prediction techniques for Plowshare nuclear detonations

Energy Technology Data Exchange (ETDEWEB)

Mueller, H F [Air Resources Laboratory, Environmental Science Services Administration, Las Vegas, NV (United States)

1969-07-01

Meteorological support requirements for Plowshare nuclear detonations are shown to depend on a number of factors. The importance of adequate support to the effective planning and safe conduct of a nuclear detonation is described. An example of the influence of atmospheric conditions on radioactive cloud development and local transport and fallout of radioactive debris is presented. Prediction of the future state of atmospheric wind structure, required for fallout predictions depends on an adequate definition of its initial state and its rate of change. This definition, in turn, is shown to depend on an upper wind-sounding network of appropriate station density. An operational technique currently used for nuclear cratering fallout predictions is described and shown to produce results of useful accuracy. (author)

Attempt of application of prefabrication techniques to nuclear engineering

International Nuclear Information System (INIS)

Frangi, Roger

1981-01-01

Prefabrication can apply to nuclear civil engineering for the execution of complicated or tall shuttering or casing work, requiring shoring that one would wish to simplify or suppress. This technique saves on work hours and improves quality and safety. A few examples carried out on the Saint-Laurent-des-Eaux and Chinon power stations are given as well as that which will be undertaken on the Belleville power station [fr

Simulation of land mine detection processes using nuclear techniques

International Nuclear Information System (INIS)

Aziz, M.

2005-01-01

A computer models were designed to study the processes of land mine detection using nuclear technique. Parameters that affect the detection were analyzed . Mines of different masses at different depths in the soil are considered using two types of sources , 252 C f and 14 MeV neutron source. The capability to differentiate between mines and other objects such as concrete , iron , wood , Aluminum ,water and polyethylene were analyzed and studied

Use of nuclear techniques for coal analysis in exploration, mining and processing

International Nuclear Information System (INIS)

Clayton, C.G.; Wormald, M.R.

1982-01-01

Nuclear techniques have a long history of application in the coal industry, during exploration and especially during coal preparation, for the measurement of ash content. The preferred techniques are based on X- and gamma-ray scattering and borehole logging, and on-line equipment incorporating these techniques are now in world-wide routine use. However, gamma-ray techniques are mainly restricted to density measurement and X-ray techniques are principally used for ash determinations. They have a limited range and when used on-line some size reduction of the coal is usually required and a full elemental analysis is not possible. In particular, X- and gamma-ray techniques are insensitive to the principal elements in the combustible component and to many of the important elements in the mineral fraction. Neutron techniques on the other hand have a range which is compatible with on-line requirements and all elements in the combustible component and virtually all elements in the mineral component can be observed. A complete elemental analysis of coal then allows the ash content and the calorific value to be determined on-line. This paper surveys the various nuclear techniques now in use and gives particular attention to the present state of development of neutron methods and to their advantages and limitations. Although it is shown that considerable further development and operational experience are still required, equipment now being introduced has a performance which matches many of the identified requirements and an early improvement in specification can be anticipated

Environmental pollutants monitoring network using nuclear techniques

International Nuclear Information System (INIS)

Cohen, D.D.

1994-01-01

The Australian Nuclear Science and Technology Organisation (ANSTO) in collaboration with the NSW Environment Protection Authority (EPA), Pacific Power and the Universities of NSW and Macquarie has established a large area fine aerosol sampling network covering nearly 60,000 square kilometres of NSW with 25 fine particle samplers. This network known as ASP commenced sampling on 1 July 1991. The cyclone sampler at each site has a 2.5 μm particle diameter cut off and samples for 24 hours using a stretched Teflon filter for each day. Accelerator-based Ion Beam Analysis(IBA) techniques are well suited to analyse the thousands of filter papers a year that originate from such a large scale aerosol sampling network. These techniques are fast multi-elemental and, for the most part, non-destructive so other analytical methods such as neutron activation and ion chromatography can be performed afterwards. Currently ANSTO receives 300 filters per month from this network for analysis using its accelerator based ion beam techniques on a 3 MV Van de Graaff accelerator. One week a month of accelerator time is dedicated to this analysis. This paper described the four simultaneous accelerator based IBA techniques used at ANSTO, to analyse for the following 24 elements H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Co, Zn, Br and Pb. Each analysis requires only a few minutes of accelerator running time to complete. 15 refs., 9 figs

Nuclear analytical techniques in Cuban Sugar Industry

International Nuclear Information System (INIS)

Diaz Riso, O.; Griffith Martinez, J.

1996-01-01

This paper is a review concerning the applications of Nuclear Analytical Techniques in the Cuban sugar industry. The most complete elemental composition of final molasses (34 elements ) and natural zeolites (38) this last one employed as an auxiliary agent in sugar technological processes has been performed by means of Instrumental Neutron Activation Analysis (INAA) and X-Ray Fluorescence Analysis (XRFA). The trace elements sugar cane soil plant relationship and elemental composition of different types of Cuban sugar (rawr, blanco directo and refine) were also studied. As a result, valuable information referred to the possibilities of using these products in animal and human foodstuff so as in other applications are given

Nuclear analytical techniques and their application to environmental samples

International Nuclear Information System (INIS)

Lieser, K.H.

1986-01-01

A survey is given on nuclear analytical techniques and their application to environmental samples. Measurement of the inherent radioactivity of elements or radionuclides allows determination of natural radioelements (e.g. Ra), man-made radioelements (e.g. Pu) and radionuclides in the environment. Activation analysis, in particular instrumental neutron activation analysis, is a very reliable and sensitive method for determination of a great number of trace elements in environmental samples, because the most abundant main constituents are not activated. Tracer techniques are very useful for studies of the behaviour and of chemical reactions of trace elements and compounds in the environment. Radioactive sources are mainly applied for excitation of characteristic X-rays (X-ray fluorescence analysis). (author)

The nuclear controversy and nuclear safety techniques

International Nuclear Information System (INIS)

Ragnarson, P.

1979-09-01

Survey interviews with 125 Swedish nuclear safety engineers are summarized and commented upon. A short historical background is given, claiming that the major safety issues of nuclear energy have been debated continously during the 50's and 60's in a way that could well have been watched and interpreted by a political, democratic system involving political parties, government departments, etc. With a few exceptions, these 125 engineers represent 10 - 20 years experience in nuclear research and development. By definition they belong to a professional group of about 800 in Sweden (1978). The main aim of the study is to find out if (how and why) a public debate can bring about changes in an industrially established technology by influencing the attitudes and technical judgements of the individuals and/or organizations involved. Examples are given in which the nuclear specialists themselves admit or claim that direct or indirect impacts from the public debate have been important. A common experience is that the scientists and engineers have been forced to broaden their professional scope through a time-consuming but - on the whole - 'positive' process. A year after the interviews started, a serious reactor accident occured near Harrisburg, Pennsylvania. The group has been used for a survey of the immediate reactions in order to see if it could cause sudden changes of attitudes among the experts. A minority demonstrated clear changes towards a more cautious attitude regarding nuclear risks. (author)

Nuclear and radiation techniques - state of art and development trends

International Nuclear Information System (INIS)

Chmielewski, A.G.

1995-01-01

The state of art and development trends of nuclear and radiation techniques in Poland and worldwide have been presented. Among them the radiometric gages, radiation technologies, radiotracer methods and measuring systems for pipeline and vessels, brightness control have been described and their applications in industry, agriculture, health and environment protection have been shown and discussed. 35 refs, 1 fig

Applications of nuclear techniques in agronomy as a contribution to the integral formation of agronomical engineers

International Nuclear Information System (INIS)

Núñez Meireles, Mónica; Hernández Martínez, Asiel; Charbonet Martell, Miguel Enrique

2016-01-01

Nowadays, nuclear research applied to agriculture and food is a reality, and is being supported by institutions like the International Atomic Energy Agency and the United Nations Food and Agriculture Organization. Stable and radioactive isotopes are used in different ways in agricultural research mainly in the determination of required conditions to optimize efficiency in the use of fertilizers and water, the development of high yield agricultural and horticultural varieties, reduction of diseases due to contaminated food, and soil erosion studies among others. Accordingly to the study carried out, there is not much knowledge about nuclear phenomena applied to agronomy. Nevertheless there is a positive criterion about the introduction of these topics in Agronomical Engineers education, by mean of implementing an optional subject, aimed at explaining different spheres of action of nuclear techniques in Agriculture. Consequently, it would be possible achieving the linkage of agronomical engineers with the nuclear techniques, though respecting at the same time the professional model of this career. Moreover, it is also proposed to include laboratory practices in the curriculum of this career, using nuclear techniques and showing their proper linkage with Agronomy. (author)

Recent applications of nuclear track emulsion technique

Energy Technology Data Exchange (ETDEWEB)

Zarubin, P. I., E-mail: zarubin@lhe.jinr.ru [Joint Institute for Nuclear Research, Veksler and Baldin Laboratory of High Energy Physics (Russian Federation)

2016-12-15

A survey of recent results obtained using the nuclear track emulsion (NTE) technique in low energy applications is given. NTE irradiation with 60 MeV {sup 8}He nuclei provides identification of their decays at stopping, evaluation of the possibility of α range spectrometry, and observation of drift of thermalized {sup 8}He atoms. Correlations of α particles studied in {sup 12}C → 3α splitting induced by 14.1 MeV neutrons indicate the presence of a superposition of 0{sup +} and 2{sup +} states of the {sup 8}Be nucleus in the ground state of {sup 12}C. Angular correlations of fragments are studied in boron-enriched NTE, and the prospects of NTE application in radioactivity and nuclear fission research are discussed. It is proposed to use an automated microscope to search for collinear tripartition of heavy nuclei implanted in NTE. Surface irradiation of NTE by a {sup 252}Cf source is started. Planar events containing fragment pairs and long range α particles, as well as fragment triples, are studied. NTE samples are calibrated using Kr and Xe ions with an energy of 1.2 and 3 A MeV.

Application of advanced nuclear and instrumental analytical techniques for characterisation of environmental materials

International Nuclear Information System (INIS)

Sudersanan, M.; Pawaskar, P.B.; Kayasth, S.R.; Kumar, S.C.

2002-01-01

Full text: Increasing realisation about the toxic effects of metal ions in environmental materials has given an impetus to research on analytical techniques for their characterization. The large number of analytes present at very low levels has necessitated the use of sensitive, selective and element specific techniques for their characterization. The concern about precision and accuracy on such analysis, which have socio-economic bearing, has emphasized the use of Certified Reference Materials and the use of multi-technique approach for the unambiguous characterization of analytes. The recent work carried out at Analytical Chemistry Division, BARC on these aspects is presented in this paper. Increasing use of fossil fuels has led to the generation of large quantities of fly ash which pose problems of safe disposal. The utilization of these materials for land filling is an attractive option but the presence of trace amounts of toxic metals like mercury, arsenic, lead etc may cause environmental problems. In view of the inhomogeneous nature of the material, efficient sample processing is an important factor, in addition to the validation of the results by the use of proper standards. Analysis was carried out on flyash samples received as reference materials and also as samples from commercial sources using a combination of both nuclear techniques like INAA and RNAA as well as other techniques like AAS, ICPAES, cold vapour AAS for mercury and hydride generation technique for arsenic. Similar analysis using nuclear techniques was employed for the characterization of air particulates. Biological materials often serve as sensitive indicator materials for pollution measurements. They are also employed for studies on the uptake of toxic metals like U, Th, Cd, Pb, Hg etc. The presence of large amounts of organic materials in them necessitate an appropriate sample dissolution procedure. In view of the possibility of loss of certain analytes like Cd, Hg, As, by high

Nuclear techniques to identify allergenic metals in orthodontic brackets

International Nuclear Information System (INIS)

Zenobio, E.G.; Zenobio, M.A.F.; Menezes, M.A.B.C.

2009-01-01

The present study determines the elementary alloy composition of ten commercial brands of brackets, especially related to Ni, Cr, and Co metals, confirmed allergenic elements. The nuclear techniques applied in the analyses were X-ray fluorescence (XRF) - Centre National de la Recherche Scientifique, France (National Center of Scientific Research), and X-ray energy spectrometry (XRES), and Instrumental Neutron Activation Analysis (INAA) - CDTN/CNEN, Brazil. The XRES and XRF techniques identified Cr in the 10 samples analyzed and Ni in eight samples. The INAA technique identified the presence of Cr (14% to 19%) and Co (42% to 2400 ppm) in all samples. The semi-quantitative analysis performed by XRF also identified Co in two samples. The techniques were effective in the identification of metals in orthodontic brackets. The elements identified in this study can be considered one of the main reason for the allergic processes among the patients studied. This finding suggests that the patients should be tested for allergy and allergenic sensibility to metals prior to the prescription of orthodontic device. (author)

Harmonization of health related environmental measurements using nuclear and isotopic techniques. Proceedings of an international symposium

International Nuclear Information System (INIS)

1997-01-01

One of the particular strengths of nuclear methods is in analytical quality assurance, including the validation of analytical methods and the development of new analytical reference materials. These methodologies are therefore helping to harmonize the data produced not only by nuclear techniques themselves, but also by other non-nuclear methods of analysis. The aim of this symposium was to provide an international forum for discussion of these topics. Its programme covered a wide variety of applications of nuclear (and related) analytical techniques (mainly neutron activation analysis, energy dispersive X ray fluorescence, particle induced X ray emission and inductively coupled plasma-mass spectrometry) as used in the study of air particulates, solid waste products, sediments, food, water, human tissues, biomonitors and other kinds of environmental samples

Propagation of nuclear data uncertainties in fuel cycle calculations using Monte-Carlo technique

International Nuclear Information System (INIS)

Diez, C.J.; Cabellos, O.; Martinez, J.S.

2011-01-01

Nowadays, the knowledge of uncertainty propagation in depletion calculations is a critical issue because of the safety and economical performance of fuel cycles. Response magnitudes such as decay heat, radiotoxicity and isotopic inventory and their uncertainties should be known to handle spent fuel in present fuel cycles (e.g. high burnup fuel programme) and furthermore in new fuel cycles designs (e.g. fast breeder reactors and ADS). To deal with this task, there are different error propagation techniques, deterministic (adjoint/forward sensitivity analysis) and stochastic (Monte-Carlo technique) to evaluate the error in response magnitudes due to nuclear data uncertainties. In our previous works, cross-section uncertainties were propagated using a Monte-Carlo technique to calculate the uncertainty of response magnitudes such as decay heat and neutron emission. Also, the propagation of decay data, fission yield and cross-section uncertainties was performed, but only isotopic composition was the response magnitude calculated. Following the previous technique, the nuclear data uncertainties are taken into account and propagated to response magnitudes, decay heat and radiotoxicity. These uncertainties are assessed during cooling time. To evaluate this Monte-Carlo technique, two different applications are performed. First, a fission pulse decay heat calculation is carried out to check the Monte-Carlo technique, using decay data and fission yields uncertainties. Then, the results, experimental data and reference calculation (JEFF Report20), are compared. Second, we assess the impact of basic nuclear data (activation cross-section, decay data and fission yields) uncertainties on relevant fuel cycle parameters (decay heat and radiotoxicity) for a conceptual design of a modular European Facility for Industrial Transmutation (EFIT) fuel cycle. After identifying which time steps have higher uncertainties, an assessment of which uncertainties have more relevance is performed

Techniques and applications of the human reliability analysis in nuclear facilities

International Nuclear Information System (INIS)

Pinto, Fausto C.

1995-01-01

The analysis and prediction of the man-machine interaction are the objectives of human reliability analysis. In this work is presented in a manner that could be used by experts in the field of Probabilistic Safety Assessment, considering primarily the aspects of human errors. The Technique of Human Error Rate Prediction (THERP) is used in large scale to obtain data on human error. Applications of this technique are presented, as well as aspects of the state-of-art and of research and development of this particular field of work, where the construction of a reliable data bank is considered essential. In this work is also developed an application of the THERP for the TRIGA Mark 1 IPR R-1 Reactor of the Centro de Desenvolvimento de Tecnologia Nuclear, Brazilian research institute of nuclear technology. The results indicate that some changes must be made in the emergency procedures of the reactor, in order to achieve a higher level of safety

Image processing techniques for thermal, x-rays and nuclear radiations

International Nuclear Information System (INIS)

Chadda, V.K.

1998-01-01

The paper describes image acquisition techniques for the non-visible range of electromagnetic spectrum especially thermal, x-rays and nuclear radiations. Thermal imaging systems are valuable tools used for applications ranging from PCB inspection, hot spot studies, fire identification, satellite imaging to defense applications. Penetrating radiations like x-rays and gamma rays are used in NDT, baggage inspection, CAT scan, cardiology, radiography, nuclear medicine etc. Neutron radiography compliments conventional x-rays and gamma radiography. For these applications, image processing and computed tomography are employed for 2-D and 3-D image interpretation respectively. The paper also covers main features of image processing systems for quantitative evaluation of gray level and binary images. (author)

Mobile Techniques for Rapid Detection of Concealed Nuclear Material

International Nuclear Information System (INIS)

Rosenstock, W.; Koeble, T.; Risse, M.; Berky, W.

2015-01-01

To prevent the diversion of nuclear material as well as illicit production, transport and use of nuclear material we investigated in mobile techniques to detect and identify such material in the field as early as possible. For that purpose we use a highly sensitive gamma measurement system installed in a car. It consists of two large volume plastic scintillators, one on each side of the car, each scintillator with 12 l active volume, and two extreme sensitive high purity Germanium detectors with 57 cm 2 crystal diameter, cooled electrically. The measured data are processed immediately with integrated, appropriate analysis software for direct assessment including material identification and classification within seconds. The software for the plastic scintillators can differentiate between natural and artificial radioactivity, thus giving a clear hint for the existence of unexpected material. In addition, the system is equipped with highly sensitive neutron detectors. We have performed numerous measurements by passing different radioactive and nuclear sources in relatively large distances with this measurement car. Even shielded as well as masked material was detected and identified in most of the cases. We will report on the measurements performed in the field (on an exercise area) and in the lab and discuss the capabilities of the system, especially with respect to timeliness and identification. This system will improve the nuclear verification capabilities also. (author)

Heat Exchanger Tube Inspection of Nuclear Power Plants using IRIS Technique

International Nuclear Information System (INIS)

Yoon, Byung Sik; Yang, Seung Han; Song, Seok Yoon; Kim, Yong Sik; Lee, Hee Jong

2005-01-01

Inspection of heat exchange tubing include steam generator of nuclear power plant mostly performed with eddy current method. Recently, various inspection technique is available such as remote field eddy current, flux leakage and ultrasonic methods. Each of these techniques has its merits and limitations. Electromagnetic techniques are very useful to locate areas of concern but sizing is hard because of the difficult interpretation of an electric signature. On the other hand, ultrasonic methods are very accurate in measuring wall loss damage, and are reliable for detecting cracks. Additionally ultrasound methods is not affected by support plates or tube sheets and variation of electrical conductivity or permeability. Ultrasound data is also easier to analyze since the data displayed is generally the remaining wall thickness. It should be emphasized that ultrasound is an important tool for sizing defects in tubing. In addition, it can be used in situations where eddy current or remote field eddy current is not reliable, or as a flaw assessment tool to supplement the electromagnetic data. The need to develop specialized ultrasonic tools for tubing inspection was necessary considering the limitations of electromagnetic techniques to some common inspection problems. These problems the sizing of wall loss in carbon steel tubes near the tube sheet or support plate, sizing internal erosion damage, and crack detection. This paper will present an IRIS(Internal Rotating Inspection System) ultrasonic tube inspection technique for heat exchanger tubing in nuclear power plant and verify inspection reliability for artificial flaw embedded to condenser tube

Explosive cutting techniques for dismantling of concrete structures in a nuclear power station following decommissioning

International Nuclear Information System (INIS)

Freund, H.U.; Fleischer, C.C.

1993-01-01

This report describes the work that has been jointly carried out, based on a common and complementary research programme, by the Battelle Institut e.V., Frankfurt and Taylor Woodrow Construction Ltd., Southall, on the controlled use of explosives for the cutting and safe removal of activated and contaminated parts of nuclear facilities without impairing the overall structural integrity. Previous work had demonstrated the feasibility of using explosive techniques for the stripping off of an equivalent thickness of concrete, for radiation protection, from the inside walls of nuclear facilities. The present research work aims at complementing, improving and optimizing the foregoing work. Extensive investigations have been executed on the adjustment of blasting parameters, material and structural effects, drilling techniques, particle distribution and on procedures for remote handling. The report presents the results obtained from field trials and theoretical analysis undertaken to augment the development programme. It concludes that the controlled use of explosives offers a safe and favourable dismantling technique for the decommissioning of nuclear facilities

Developments in operator assistance techniques for nuclear power plant control and operation

International Nuclear Information System (INIS)

Poujol, A.; Papin, B.; Beltranda, G.; Soldermann, R.

1989-01-01

This paper describes an approach which has been developed in order to improve nuclear power plants control and monitoring in normal and abnormal situations. These developments take full advantage of the trend towards the computerization of control rooms in industrial continuous processes. This research program consists in a thorough exploration of different information processing techniques, ranking from the rather simple visual synthetization of informations on graphic displays to sophisticated Artificial Intelligence (AI) techniques. These techniques are put into application for the solving of man-machine interface problems in the different domains of plant operation

Integrating geographical information and augmented reality techniques for mobile escape guidelines on nuclear accident sites

International Nuclear Information System (INIS)

Tsai, Ming-Kuan; Lee, Yung-Ching; Lu, Chung-Hsin; Chen, Mei-Hsin; Chou, Tien-Yin; Yau, Nie-Jia

2012-01-01

During nuclear accidents, when radioactive materials spread into the environment, the people in the affected areas should evacuate immediately. However, few information systems are available regarding escape guidelines for nuclear accidents. Therefore, this study constructs escape guidelines on mobile phones. This application is called Mobile Escape Guidelines (MEG) and adopts two techniques. One technique is the geographical information that offers multiple representations; the other is the augmented reality that provides semi-realistic information services. When this study tested the mobile escape guidelines, the results showed that this application was capable of identifying the correct locations of users, showing the escape routes, filtering geographical layers, and rapidly generating the relief reports. Users could evacuate from nuclear accident sites easily, even without relief personnel, since using slim devices to access the mobile escape guidelines is convenient. Overall, this study is a useful reference for a nuclear accident emergency response.

Application of ultrasonic phased array technique for inspection of stud bolts in nuclear reactor vessel

International Nuclear Information System (INIS)

Choi, Sang Woo; Lee, Joon Ho; Park, Min Su; Cho, Youn Ho; Park, Moon Ho

2004-01-01

The stud bolt is one of crucial parts for safety of reactor vessels in nuclear power plants. Cracks initiation and propagation were reported in stud bolts using closure of reactor vessel and head. Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure and radioactive leakage from nuclear reactor. In conventional ultrasonic testing for inspection of stud bolts, crack was detected by using shadow effect. It take too much time to inspect stud bolt by using conventional ultrasonic technique. In addition, there were numerous spurious signal reflected from every thread. In this study, the advanced ultrasonic phased array technique was introduced for inspect stud bolts. The phased array technique provide fast inspection and high detectability of defects. There are sector scanning and linear scanning method in phased array technique, and these scanning methods were applied to inspect stud bolt and detectability was investigated.

Communication techniques and nuclear energy

International Nuclear Information System (INIS)

Carpintero Santamaria, N.

2005-01-01

The paper presents some thoughts on several factors related to nuclear energy and the way they are presented by the mass media, usually provoking controversy to the Spanish society and thus, undermining public acceptance. Some possibilities for boosting nuclear energy among public opinion are suggested, emphasizing the fact that nuclear power is essential because it is both ecologically and economically sound. (Author)

Papers of All-Polish Conference on Nuclear Techniques in Industry, Medicine, Agriculture and Environmental Protection

International Nuclear Information System (INIS)

2002-01-01

These proceedings comprise papers presented at All-Polish Conference on nuclear techniques in industry, medicine, agriculture and environmental protection. Most of the papers are in the field of uses of radiation sources and particle beams in industry, radiation chemistry, nuclear medicine and dosimetry, environmental sciences

Introduction to digital instrumentation and control techniques used in nuclear engineering

International Nuclear Information System (INIS)

Kurilla, R.G.; Kenney, E.S.

1988-01-01

For the past 8 yr, the nuclear engineering department at Pennsylvania State University has been teaching a digital interfacing class at the undergraduate (senior) level. With the ever-increasing use of computers in the nuclear engineering area (such as in the use of automated data acquisition systems) and the complexity of control instrumentation, more than a cursory introduction into electronics and computer controls is needed. Because of the ever-increasing popularity, and hence importance, of IBM-PC compatible microcomputers in the engineering fields, the program has been adapted to the Intel 8086 microprocessor. Courses such as this one are helpful in ensuring the students have an adequate design and practice base as required by accrediting groups. The course, is composed of three parts: (1) machine code/assembly language, (2) interfacing, and (3) final project. Experience demonstrates that a course of this inherent complexity can successfully be taught within a nuclear engineering curriculum without extensive prerequisites. The important ingredient is to treat nuclear engineering students for exactly what they are, engineers. By having them use their creativity and adaptability, they can successfully integrate the digital interfacing techniques now routinely used in the nuclear industry

Advantages and disadvantages of nuclear magnetic resonance spectroscopy as a hyphenated technique

International Nuclear Information System (INIS)

Silva Elipe, Maria Victoria

2003-01-01

A general overview of the advancements and applications of nuclear magnetic resonance (NMR) hyphenated with other analytical techniques is given from a practical point of view. Details on the advantages and disadvantages of the hyphenation of NMR with liquid chromatography as LC-NMR and also with mass spectrometry as LC-MS-NMR are demonstrated with two examples. Current developments of NMR with other analytical separation techniques, especially with capillary liquid chromatography (capLC) are discussed

On-line nuclear ash gauge for coal based on gamma-ray transmission techniques

International Nuclear Information System (INIS)

Rizk, R.A.M.; El-Kateb, A.H.; Abdul-Kader, A.M.

1999-01-01

Developments and applications of on-line nuclear gauges in the coal industry are highly requested. A nuclear ash gauge for coal, based on γ-ray transmission techniques is developed. Single and dual energy γ-ray beams are used to determine the ash content of coal. The percentage ash content as a function of the γ-ray intensities transmitted through coal samples is measured and sensitivity curves are obtained. An empirical formulation relating the ash content values to the γ-ray intensities is derived. Preliminary results show that both single and dual energy γ-ray transmission techniques can be used to give a rapid on-line estimation of the ash concentration values in coal with low cost and reasonable accuracy, but the dual one is much preferable. (author)

Integrating geographical information and augmented reality techniques for mobile escape guidelines on nuclear accident sites.

Science.gov (United States)

Tsai, Ming-Kuan; Lee, Yung-Ching; Lu, Chung-Hsin; Chen, Mei-Hsin; Chou, Tien-Yin; Yau, Nie-Jia

2012-07-01

During nuclear accidents, when radioactive materials spread into the environment, the people in the affected areas should evacuate immediately. However, few information systems are available regarding escape guidelines for nuclear accidents. Therefore, this study constructs escape guidelines on mobile phones. This application is called Mobile Escape Guidelines (MEG) and adopts two techniques. One technique is the geographical information that offers multiple representations; the other is the augmented reality that provides semi-realistic information services. When this study tested the mobile escape guidelines, the results showed that this application was capable of identifying the correct locations of users, showing the escape routes, filtering geographical layers, and rapidly generating the relief reports. Users could evacuate from nuclear accident sites easily, even without relief personnel, since using slim devices to access the mobile escape guidelines is convenient. Overall, this study is a useful reference for a nuclear accident emergency response. Copyright © 2012 Elsevier Ltd. All rights reserved.

Nuclear assay of coal. Volume 4. Moisture determination in coal: survey of electromagnetic techniques. Final report

International Nuclear Information System (INIS)

Bevan, R.; Luckie, P.; Gozani, T.; Brown, D.R.; Bozorgmanesh, H.; Elias, E.

1979-01-01

This survey consists of two basic parts. The first consists of a survey of various non-nuclear moisture determination techniques. Three techniques are identified as promising for eventual on-line application with coal; these are the capacitance, microwave attenuation, and nuclear magnetic resonance (NMR) techniques. The second part is devoted to an in-depth analysis of these three techniques and the current extent to which they have been applied to coal. With a given coal type, accuracies of +- 1% absolute in moisture content are achievable with all three techniques. The accuracy of the two electromagnetic techniques has been demonstrated in the laboratory and on-line in coal burning plants, whereas only small samples have been analyzed with NMR. The current shortcoming of the simple electromagnetic techniques is the sensitivity of calibrations to physical parameters and coal type. NMR is currently limited by small sample sizes and non-rugged design. These findings are summarized and a list of manufacturers of moisture analyzers is given in the Appendix

Coded Aperture Nuclear Scintigraphy: A Novel Small Animal Imaging Technique

Directory of Open Access Journals (Sweden)

Dawid Schellingerhout

2002-10-01

Full Text Available We introduce and demonstrate the utility of coded aperture (CA nuclear scintigraphy for imaging small animals. CA imaging uses multiple pinholes in a carefully designed mask pattern, mounted on a conventional gamma camera. System performance was assessed using point sources and phantoms, while several animal experiments were performed to test the usefulness of the imaging system in vivo, with commonly used radiopharmaceuticals. The sensitivity of the CA system for 99mTc was 4.2 × 103 cps/Bq (9400 cpm/μCi, compared to 4.4 × 104 cps/Bq (990 cpm/μCi for a conventional collimator system. The system resolution was 1.7 mm, as compared to 4–6 mm for the conventional imaging system (using a high-sensitivity low-energy collimator. Animal imaging demonstrated artifact-free imaging with superior resolution and image quality compared to conventional collimator images in several mouse and rat models. We conclude that: (a CA imaging is a useful nuclear imaging technique for small animal imaging. The advantage in signal-to-noise can be traded to achieve higher resolution, decreased dose or reduced imaging time. (b CA imaging works best for images where activity is concentrated in small volumes; a low count outline may be better demonstrated using conventional collimator imaging. Thus, CA imaging should be viewed as a technique to complement rather than replace traditional nuclear imaging methods. (c CA hardware and software can be readily adapted to existing gamma cameras, making their implementation a relatively inexpensive retrofit to most systems.

Nuclear techniques for the study of environmental pollution and control: experience and facilities at PINSTECH

International Nuclear Information System (INIS)

Rajput, M.U.; Butt, N.M.

2001-01-01

Environmental pollution is a worldwide problem. Developed countries have already gone in the clutches of pollution. Now the rapid industrialization and modernization process has also started in the developing countries. This is posing a serious threat to their own environment. One of the important factors in the pollution control measures is to investigate the levels of environmental pollution, from time to time, by effective and reliable methods. Nuclear techniques due to their high sensitivities play an important role in this regard. These techniques have the potential to determine the concentration of pollutants in trace level quantities (ppm and ppb) and for locating the possible pollution sources such as power plants, refineries, municipal waste, industries etc. Pakistan Institute of Nuclear Science and Technology (PINSTECH) has qualified and experienced scientists and has nearly all the major nuclear facilities that are needed for environmental research such as mass spectrometry, tracer techniques, neutron activation analysis (NAA), X-ray fluorescence spectrometry (XRFS), atomic absorption spectrometry (AAS), atomic emission spectrometry (AES), inductively coupled plasma-optical emission spectrometry (ICP-OES) etc. This paper discusses the importance of environmental pollution with a particular reference to the pollution aspects in Pakistan and the associated environmental research experience based on nuclear methods available at PINSTECH. 308 refs. (author)

Evaluation of nuclear power plant operating procedures classifications and interfaces: Problems and techniques for improvement

International Nuclear Information System (INIS)

Barnes, V.E.; Radford, L.R.

1987-02-01

This report presents activities and findings of a project designed to evaluate current practices and problems related to procedure classification schemes and procedure interfaces in commercial nuclear power plants. The phrase ''procedure classification scheme'' refers to how plant operating procedures are categorized and indexed (e.g., normal, abnormal, emergency operating procedures). The term ''procedure interface'' refers to how reactor operators are instructed to transition within and between procedures. The project consisted of four key tasks, including (1) a survey of literature regarding problems associated with procedure classifications and interfaces, as well as techniques for overcoming them; (2) interviews with experts in the nuclear industry to discuss the appropriate scope of different classes of operating procedures and techniques for managing interfaces between them; (3) a reanalysis of data gathered about nuclear power plant normal operating and off-normal operating procedures in a related project, ''Program Plan for Assessing and Upgrading Operating Procedures for Nuclear Power Plants''; and (4) solicitation of the comments and expert opinions of a peer review group on the draft project report and on proposed techniques for resolving classification and interface issues. In addition to describing these activities and their results, recommendations for NRC and utility actions to address procedure classification and interface problems are offered

Learning curve estimation techniques for the nuclear industry

International Nuclear Information System (INIS)

Vaurio, J.K.

1983-01-01

Statistical techniques are developed to estimate the progress made by the nuclear industry in learning to prevent accidents. Learning curves are derived for accident occurrence rates based on actuarial data, predictions are made for the future, and compact analytical equations are obtained for the statistical accuracies of the estimates. Both maximum likelihood estimation and the method of moments are applied to obtain parameters for the learning models, and results are compared to each other and to earlier graphical and analytical results. An effective statistical test is also derived to assess the significance of trends. The models used associate learning directly to accidents, to the number of plants and to the cumulative number of operating years. Using as a data base nine core damage accidents in electricity-producing plants, it is estimated that the probability of a plant to have a serious flaw has decreased from 0.1 to 0.01 during the developmental phase of the nuclear industry. At the same time the frequency of accidents has decreased from 0.04 per reactor year to 0.0004 per reactor year

ETRAN 2002: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLVI Conference. Vol IV

International Nuclear Information System (INIS)

Milosevic, M.; Jaksic, Z.; Bozic, D.; Potkonjak, V.

2002-01-01

The XLVI ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 4-7 June, 2002. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 14 papers presented in three following sessions: 1. Actual problems in nuclear technologies; 2. Accelerator and reactor systems; and 3. Radiation protection and ionizing radiation uses

Novel nuclear magnetic resonance techniques for studying biological molecules

Energy Technology Data Exchange (ETDEWEB)

Laws, David Douglas [Univ. of California, Berkeley, CA (United States)

2000-06-01

Over the fifty-five year history of Nuclear Magnetic Resonance (NMR), considerable progress has been made in the development of techniques for studying the structure, function, and dynamics of biological molecules. The majority of this research has involved the development of multi-dimensional NMR experiments for studying molecules in solution, although in recent years a number of groups have begun to explore NMR methods for studying biological systems in the solid-state. Despite this new effort, a need still exists for the development of techniques that improve sensitivity, maximize information, and take advantage of all the NMR interactions available in biological molecules. In this dissertation, a variety of novel NMR techniques for studying biomolecules are discussed. A method for determining backbone (Φ/Ψ) dihedral angles by comparing experimentally determined ¹³C_a, chemical-shift anisotropies with theoretical calculations is presented, along with a brief description of the theory behind chemical-shift computation in proteins and peptides. The utility of the Spin-Polarization Induced Nuclear Overhauser Effect (SPINOE) to selectively enhance NMR signals in solution is examined in a variety of systems, as are methods for extracting structural information from cross-relaxation rates that can be measured in SPINOE experiments. Techniques for the production of supercritical and liquid laser-polarized xenon are discussed, as well as the prospects for using optically pumped xenon as a polarizing solvent. In addition, a detailed study of the structure of PrP 89-143 is presented. PrP 89-143 is a 54 residue fragment of the prion proteins which, upon mutation and aggregation, can induce prion diseases in transgenic mice. Whereas the structure of the wild-type PrP 89-143 is a generally unstructured mixture of α-helical and β-sheet conformers in the solid state, the aggregates formed from the PrP 89-143 mutants appear to be mostly β-sheet.

Characterization of ceramics and semiconductors using nuclear techniques. Final report of a co-ordinated research project

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

With the aim of promoting research and facilitating more extensive application of nuclear techniques for material development, the IAEA established in 1994 a Co-ordinated Research Project (CRP) on Characterization of Ceramics and Semiconductors using Nuclear Techniques. This publication reviews and summarizes recent developments in this field and includes an assessment of the current status and trends in nuclear techniques in characterization of inorganic materials of technological importance. The TECDOC presents new achievements on ceramic superconductor behaviour under neutron induced defects, optimization of structure of mineral gels,m low temperature preparation of fine particles of ferrites, crystal luminescence of ceramic composites with improved plastic properties, thin film defects and detoxification of asbestos. The investigation of chemical composition, phase transitions and magnetic properties of ferrites by Moessbauer spectroscopy is largely developed. The document includes 18 individual contributions, each of them has been indexed and provided with an abstract Refs, figs, tabs

Characterization of ceramics and semiconductors using nuclear techniques. Final report of a co-ordinated research project

International Nuclear Information System (INIS)

1999-03-01

With the aim of promoting research and facilitating more extensive application of nuclear techniques for material development, the IAEA established in 1994 a Co-ordinated Research Project (CRP) on Characterization of Ceramics and Semiconductors using Nuclear Techniques. This publication reviews and summarizes recent developments in this field and includes an assessment of the current status and trends in nuclear techniques in characterization of inorganic materials of technological importance. The TECDOC presents new achievements on ceramic superconductor behaviour under neutron induced defects, optimization of structure of mineral gels,m low temperature preparation of fine particles of ferrites, crystal luminescence of ceramic composites with improved plastic properties, thin film defects and detoxification of asbestos. The investigation of chemical composition, phase transitions and magnetic properties of ferrites by Moessbauer spectroscopy is largely developed. The document includes 18 individual contributions, each of them has been indexed and provided with an abstract

Tools and techniques for ageing predictions in nuclear reactors through condition monitoring

International Nuclear Information System (INIS)

Verma, R.M.P.

1994-01-01

To operate the nuclear reactors beyond their design predicted life is gaining importance because of huge replacement and decommissioning costs. But experience shows that nuclear plant safety and reliability may decline in the later years of plant life due to ageing degradation. Ageing of nuclear plant components, structures and systems, if unmitigated reduces their safety margins provided in the design and thus increases risks to public health and safety. These safety margins must be monitored throughout plant service life including any extended life. Condition monitoring of nuclear reactor components/equipment and systems can be done to study the effect of ageing, status of safety margins and effect of corrective and mitigating actions taken. The tools and techniques of condition monitoring are also important in failure trending, predictive maintenance, evaluation of scheduled maintenance, in mitigation of ageing, life extension and reliability studies. (author). 1 fig., 1 annexure

Investigation of CTBT OSI Radionuclide Techniques at the DILUTED WATERS Nuclear Test Site

Energy Technology Data Exchange (ETDEWEB)

Baciak, James E.; Milbrath, Brian D.; Detwiler, Rebecca S.; Kirkham, Randy R.; Keillor, Martin E.; Lepel, Elwood A.; Seifert, Allen; Emer, Dudley; Floyd, Michael

2012-11-01

Under the Comprehensive Nuclear-Test-Ban Treaty (CTBT), a verification regime that includes the ability to conduct an On-Site Inspection (OSI) will be established. The Treaty allows for an OSI to include many techniques, including the radionuclide techniques of gamma radiation surveying and spectrometry and environmental sampling and analysis. Such radioactivity detection techniques can provide the “smoking gun” evidence that a nuclear test has occurred through the detection and quantification of indicative recent fission products. An OSI faces restrictions in time and manpower, as dictated by the Treaty; not to mention possible logistics difficulties due to the location and climate of the suspected explosion site. It is thus necessary to have a good understanding of the possible source term an OSI will encounter and the proper techniques that will be necessary for an effective OSI regime. One of the challenges during an OSI is to locate radioactive debris that has escaped an underground nuclear explosion (UNE) and settled on the surface near and downwind of ground zero. To support the understanding and selection of sampling and survey techniques for use in an OSI, we are currently designing an experiment, the Particulate Release Experiment (PRex), to simulate a small-scale vent from an underground nuclear explosion. PRex will occur at the Nevada National Security Site (NNSS). The project is conducted under the National Center for Nuclear Security (NCNS) funded by the National Nuclear Security Agency (NNSA). Prior to the release experiment, scheduled for Spring of 2013, the project scheduled a number of activities at the NNSS to prepare for the release experiment as well as to utilize the nuclear testing past of the NNSS for the development of OSI techniques for CTBT. One such activity—the focus of this report—was a survey and sampling campaign at the site of an old UNE that vented: DILUTED WATERS. Activities at DILUTED WATERS included vehicle-based survey

Department of Nuclear Spectroscopy and Technique: Overview

International Nuclear Information System (INIS)

Kozlowski, T.

1999-01-01

Full text: During the last year, the activity of our department was spread over basic research in nuclear physics (standard spectroscopy, more exotic regions close to the elementary particle physics, theoretical studies of heavy ion interactions), high energy atomic physics, applications of and nuclear physics (environmental studies, effects of irradiation, ion production). Some effort was focused on teaching - actually, four Ph. D. students are working for their degrees. Some of us were involved in organisation and further activity of the ''Radioactive Waste'' exhibition in Swierk. Our research is performed on our facilities (C30 cyclotron, low background detection facility), and in close co-operation with the Heavy Ion Laboratory of the Warsaw University, Jagellonian University in Cracow, Military Technical Academy in Warsaw, Institute of Electronic Technology and Materials in Warsaw and some foreign centers like GSI in Darmstadt, MPI in Heidelberg and KFA in Juelich (Germany), PSI in Villigen (Switzerland), University of Notre Dame, Argonne National Lab., Lawrence Berkeley Lab. and Los Alamos National Lab. (USA). The reader is invited to find some of our recent results on the next pages; together with a list of publications. Nevertheless some activities are worth mentioning: Nuclear spectroscopic studies were concentrated on Z or N 50 nuclei - determination of excited level schemes of 182,183 Ir, 180,181,182 Os and 110 Sn and 132 Ce was continued and some new effects found. The most precise lifetime of the A hyperon in very heavy hypernuclei was measured(COSY-13 project). The search of muon number forbidden nuclear μ - e nuclear conversion was continued (SINDRUM II coll.). Heavy ion interactions leading to fusion or fission processes were studied theoretically, and the experiments are in preparation. The experimental studies of atomic effects in bare, H- and He- like very heavy atoms and X ray spectroscopy of heavy ion atomic collisions were continued at GSI

Investigation And Mitigation Techniques Of Power Quality Problems In Nuclear Installations

International Nuclear Information System (INIS)

Ayad, N.; Elsherbiny, E.; Eleissawi, H.; Zaher, M.; AbdelSalam, G.

2013-01-01

The electrical power systems are exposed to different types of power quality disturbances problems. Investigation and monitoring of power quality is necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. The present research discusses investigation and monitoring of power quality problems for the electrical sources of nuclear installations. Field power quality data is collected by power analyzer and analyzed with reference to power quality standards. There were several disturbances exceeded the thresholds, they were voltage harmonics and voltage flicker. Mitigation techniques were suggested to install a passive filter at low voltage side and all sensitive and critical loads should be isolated and fed through uninterruptible power supply (UPS)

ETRAN 1999: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLIII Conference. Vol IV

International Nuclear Information System (INIS)

Spasojevic, D.; Smiljanic, M.; Bozic, D.; Stankovic, D.

1999-01-01

The XLIII ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 20-22 Sep, 1999. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 19 papers presented in three sessions.

Nuclear analytical techniques in Cuban sugar industry

International Nuclear Information System (INIS)

Diaz R, O.; Griffith M, J.

1997-01-01

This paper is a review concerning the application of Nuclear Analytical Techniques in the Cuban sugar industry. The most complete elemental composition of final molasses (34 elements) and natural zeolites (38) this last one employed as an auxiliary agent in sugar technological processe4s has been performed by means of instrumental Neutron Activation Analysis (INAA) and X-Ray Fluorescence Analysis (XRFA). The trace elemental sugar cane soill-plant relationship and elemental composition of different types of Cuban sugar (raw, blanco-directo and refine) were also studied. As a result, valuable information referred to the possibilities of using these products in animal and human foodstuff so as in the other applications are given. (author). 34 refs., 6 figs., 1 tab

Recent applications of nuclear medicine techniques and results in Vietnam

International Nuclear Information System (INIS)

Phan Sy An

2008-01-01

The author presented recent applications of nuclear medicine techniques and results in Vietnam. The author concentrated some valuable and helpful studies such as functional tests, myocardial perfusion scintigraphy, bone, thyroid, lung, kidney and gastrointestinal tract scintigraphy for diagnosis. The results of RIA and IRMA concerning with thyroid diseases, cancer, microalbuminuria and TSH in blood spot on paper for screening of congenital hypothyroidism in new born babies were also given. The report also mentioned results of liver cancer and palliative bone metastasis treatments in Vietnam. A new technique using gamma probe in surgery for breast cancer was presented. The author introduced some modern teleradiotherapeutic modalities such as cyberknif, gamma knife, gamma rotating systeme and linac recently installed in Vietnam. (author)

Applying of USB interface technique in nuclear spectrum acquisition system

International Nuclear Information System (INIS)

Zhou Jianbin; Huang Jinhua

2004-01-01

This paper introduces applying of USB technique and constructing nuclear spectrum acquisition system via PC's USB interface. The authors choose the USB component USB100 module and the W77E58μc to do the key work. It's easy to apply USB interface technique, when USB100 module is used. USB100 module can be treated as a common I/O component for the μc controller, and can be treated as a communication interface (COM) when connected to PC' USB interface. It's easy to modify the PC's program for the new system with USB100 module. The authors can smoothly change from ISA, RS232 bus to USB bus. (authors)

The development of computer industry and applications of its relevant techniques in nuclear research laboratories

International Nuclear Information System (INIS)

Dai Guiliang

1988-01-01

The increasing needs for computers in the area of nuclear science and technology are described. The current status of commerical availabe computer products of different scale in world market are briefly reviewed. A survey of some noticeable techniques is given from the view point of computer applications in nuclear science research laboratories

Application of nuclear techniques in animal health and production

Energy Technology Data Exchange (ETDEWEB)

1974-01-01

Under United Nations Development Programme in collaboration with the International Atomic Energy Agency, Vienna, a beginning was made in the use of nuclear techniques in animal health and production at the Indian Veterinary Research Institute, Izatnagar. Radioisotopes are being used as tracers for investigations in rumen digestion, metabolism, physiology and endocrinology of animals. Irradiated vaccines against parasitic infestation are being developed. Various facilities available, salient research findings of the studies carried so far and research work under progress and future development plans are described.

Application of nuclear techniques in animal health and production

International Nuclear Information System (INIS)

1974-01-01

Under United Nations Development Programme in collaboration with the International Atomic Energy Agency, Vienna, a beginning was made in the use of nuclear techniques in animal health and production at the Indian Veterinary Research Institute, Izatnagar. Radioisotopes are being used as tracers for investigations in rumen digestion, metabolism, physiology and endocrinology of animals. Irradiated vaccines against parasitic infestation are being developed. Various facilities available, salient research findings of the studies carried so far and research work under progress and future development plans are described. (M.G.B.)

Proceedings of the 8. Australian conference on nuclear techniques of analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

These proceedings contain the abstracts or extended abstracts of 72 out of 77 presentations. The topics focus on instrumentation, nuclear techniques and their applications for material science, surfaces, archaeometry, art, geological, environmental and biomedical studies. An outline of the Australian facilities available for research purposes is also provided. Separate abstracts were prepared for the individual papers in this volume.

Proceedings of the 8. Australian conference on nuclear techniques of analysis

International Nuclear Information System (INIS)

1993-01-01

These proceedings contain the abstracts or extended abstracts of 72 out of 77 presentations. The topics focus on instrumentation, nuclear techniques and their applications for material science, surfaces, archaeometry, art, geological, environmental and biomedical studies. An outline of the Australian facilities available for research purposes is also provided. Separate abstracts were prepared for the individual papers in this volume

Proceedings of the 8. Australian conference on nuclear techniques of analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

These proceedings contain the abstracts or extended abstracts of 72 out of 77 presentations. The topics focus on instrumentation, nuclear techniques and their applications for material science, surfaces, archaeometry, art, geological, environmental and biomedical studies. An outline of the Australian facilities available for research purposes is also provided. Separate abstracts were prepared for the individual papers in this volume.

The nuclear techniques role in the support of best agricultural practices

International Nuclear Information System (INIS)

Caceres, T.

2012-01-01

This presentation is about the use of nuclear-radioactive techniques in agrochemical research with the objective of: a) The animal and crops protection from illnesses and plagues b) The security in the food production. It is important the soil and food conditions study to detect the pesticides absorption as well as the conditions or food irradiation.

Industrial and environmental applications of nuclear analytical techniques. Report of a workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

The IAEA has programme the utilisation of nuclear analytical techniques (NATs), in particular for industrial and environmental applications. A major purpose is to help the developing Member States apply their analytical capabilities optimally for socio-economic progress and development. A large number of institutions in Europe, Africa, Latin America and Asia have established X ray fluorescence (XRF) and gamma ray measurement techniques and facilities for neutron activation analysis (NAA) have been initiated in institutions in these regions. Moreover, there is a growing interest among many institutes in applying more advanced analytical techniques, such as particle induced X ray emission (PIXE) and microanalytical techniques based on X ray emission induced by conventional sources or synchrotron radiation to the analysis of environmental and biological materials and industrial products. In order to define new areas of application of NATs and to extend the range of these techniques, a number of initiatives have recently been taken. It includes a workshop on industrial and environmental applications of nuclear analytical techniques, organized by the IAEA in Vienna, 7-11 September 1998. The main objectives of the workshop were as follows: (1) to review recent applications of NATs in industrial and environmental studies; (2) to identify emerging trends in methodologies and applications of NATs; (3) to demonstrate analytical capabilities of selected NATs. The following topics were reviewed during the workshop: (1) XRF and accelerator based analytical techniques; (2) portable XRF systems and their applications in industry, mineral prospecting and processing, (3) portable gamma ray spectrometers; and (4) NAA and its applications in industry and environmental studies. Micro-XRF and micro-PIXE methods and their applications in the above fields were also discussed, including aspects of synchrotron radiation induced X ray emission.

Industrial and environmental applications of nuclear analytical techniques. Report of a workshop

International Nuclear Information System (INIS)

1999-11-01

The IAEA has programme the utilisation of nuclear analytical techniques (NATs), in particular for industrial and environmental applications. A major purpose is to help the developing Member States apply their analytical capabilities optimally for socio-economic progress and development. A large number of institutions in Europe, Africa, Latin America and Asia have established X ray fluorescence (XRF) and gamma ray measurement techniques and facilities for neutron activation analysis (NAA) have been initiated in institutions in these regions. Moreover, there is a growing interest among many institutes in applying more advanced analytical techniques, such as particle induced X ray emission (PIXE) and microanalytical techniques based on X ray emission induced by conventional sources or synchrotron radiation to the analysis of environmental and biological materials and industrial products. In order to define new areas of application of NATs and to extend the range of these techniques, a number of initiatives have recently been taken. It includes a workshop on industrial and environmental applications of nuclear analytical techniques, organized by the IAEA in Vienna, 7-11 September 1998. The main objectives of the workshop were as follows: (1) to review recent applications of NATs in industrial and environmental studies; (2) to identify emerging trends in methodologies and applications of NATs; (3) to demonstrate analytical capabilities of selected NATs. The following topics were reviewed during the workshop: (1) XRF and accelerator based analytical techniques; (2) portable XRF systems and their applications in industry, mineral prospecting and processing, (3) portable gamma ray spectrometers; and (4) NAA and its applications in industry and environmental studies. Micro-XRF and micro-PIXE methods and their applications in the above fields were also discussed, including aspects of synchrotron radiation induced X ray emission

Aquaculture investigations with nuclear energy techniques

International Nuclear Information System (INIS)

Heredia Salazar, Brunilda

1997-01-01

The culture of aquatic organisms, especially that of fishes under controlled conditions, up to their harvesting, processing, commercialization and consumption, has been pointed out as an activity that produces a lot of benefits, among them: the obtention high proteic valued food, the incorporation to the economy of lands not usefull for agriculture activities, the increment of fishing resources, the recycling of organic matter produced in the units, the regional development, the generation of employment, technologies and foreign currencies. Several research areas are identified that can be developed, using the nuclear technologies, for example in the reproduction, nutrition, diagnose and control of illnesses, environmental monitoring and quality certification of products. In the concerning to the Venezuelan aquaculture, investigations are required that need to use those techniques. For example: 1) Production of autochthonous inductive agents, by means of radioinmunoenssay (RIA), to determine the gonadotropines coming from the hypophysis of fish cultivated with the purpose of gathering the glands in its best moment, to generate the final maturation and spawn in autochthonous species. 2) Genetic improvement of cultivated species through the knowledge of the genetic load of different lines and breeds found in the natural means, and to achieve its maintenance to solve inbreeding problems, in autochthonous species aswell in as in exotic ones, by the use of marking techniques (ADE, RFLA and microsatellite techniques). 3) Nutritional and feeding studies of species under commertial culture, especially on the effect of the aflatoxins in the inputs or the portions, substances that influence in a negative way the aquatic nutrition. In this case, competitive immunoassays of enzymes bounded (ELISA) and radioinmunoessays. 4) Illness diagnose, by means of the ELISA kit, specifically of the more common illness in fishes cultivated in the country [es

Characterization of natural bentonite by NMR; Caracterizacao de bentonitas naturais por ressonancia magnetica nuclear

Energy Technology Data Exchange (ETDEWEB)

Leite, Sidnei Q.M.; Dieguez, Lidia C [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Menezes, Sonia M.C. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas; San Gil, Rosane A.S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica

1994-12-31

Solid state NMR as well as several other instrumental chemical analysis techniques were used in order to characterize two natural occurring bentonite. The methodology is described. The NMR spectra, together with the other used techniques suggest that the observed differences are due to iron inclusions in tetrahedral and octahedral sites 5 refs., 3 figs., 5 tabs.

Database 'catalogue of techniques applied to materials and products of nuclear engineering'

International Nuclear Information System (INIS)

Lebedeva, E.E.; Golovanov, V.N.; Podkopayeva, I.A.; Temnoyeva, T.A.

2002-01-01

The database 'Catalogue of techniques applied to materials and products of nuclear engineering' (IS MERI) was developed to provide informational support for SSC RF RIAR and other enterprises in scientific investigations. This database contains information on the techniques used at RF Minatom enterprises for reactor material properties investigation. The main purpose of this system consists in the assessment of the current status of the reactor material science experimental base for the further planning of experimental activities and methodical support improvement. (author)

Seismic qualification of nuclear control board by using base isolation technique

International Nuclear Information System (INIS)

Koizumi, T.; Tsujiuchi, N.; Fujita, T.

1987-01-01

The purpose is to adopt base isolation technique as a new approach for seismic qualification of nuclear control board. Basic concept of base isolation technique is expressed. Two dimensional linear motion mechanism with pre-tensioned coil springs and some dampers are included in the isolation device. Control board is regarded as a lamped mass system with inertia moment. Fundamental movement of this device and control board is calculated as a non-linear response problems. Fundamental analysis and numerical estimation, experimental investigation has been undertaken using an actual size control board. Sufficient agreement was recognized between experimental results and numerical estimation. (orig./HP)

In Situ Analytical Characterization of Contaminated Sites Using Nuclear Spectrometry Techniques. Review of Methodologies and Measurements

International Nuclear Information System (INIS)

2017-01-01

Past and current human activities can result in the contamination of sites by radionuclides and heavy metals. The sources of contamination are various. The most important sources for radionuclide release include global fallout from nuclear testing, nuclear and radiological accidents, waste production from nuclear facilities, and activities involving naturally occurring radioactive material (NORM). Contamination of the environment by heavy metals mainly originates from industrial applications and mineralogical background concentration. Contamination of sites by radionuclides and heavy metals can present a risk to people and the environment. Therefore, the estimation of the contamination level and the identification of the source constitute important information for the national authorities with the responsibility to protect people and the environment from adverse health effects. In situ analytical techniques based on nuclear spectrometry are important tools for the characterization of contaminated sites. Much progress has been made in the design and implementation of portable systems for efficient and effective monitoring of radioactivity and heavy metals in the environment directly on-site. Accordingly, the IAEA organized a Technical Meeting to review the current status and trends of various applications of in situ nuclear spectrometry techniques for analytical characterization of contaminated sites and to support Member States in their national environmental monitoring programmes applying portable instrumentation. This publication represents a comprehensive review of the in situ gamma ray spectrometry and field portable X ray fluorescence analysis techniques for the characterization of contaminated sites. It includes papers on the use of these techniques, which provide useful background information for conducting similar studies, in the following Member States: Argentina, Australia, Brazil, Czech Republic, Egypt, France, Greece, Hungary, Italy, Lithuania

Nuclear techniques in animal production and health. Proceedings series. Proceedings of an international symposium on nuclear techniques in animal production and health, Vienna, Austria, February 2--6, 1976

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

Fifty-three papers were presented on the use of nuclear techniques in the following areas of research: minerals in soil- plant- animal relations; trace elements in animal nutrition; calcium, phosphorus, and magnesium metabolism; protein and nitrogen metabolism in ruminants and non-ruminants; control of parasitic infections; and animal endocrinology. (HLW)

Nuclear medicine imaging technique in the erectile dysfunction evaluation: a mini-review

International Nuclear Information System (INIS)

Ribeiro, Camila Godinho; Moura, Regina; Neves, Rosane de Figueiredo; Spinosa, Jean Pierre; Bernardo-Filho, Mario

2007-01-01

Functional imaging with positron emission tomography and single photon emission computed tomography is capable of visualizing subtle changes in physiological function in vivo. Erectile dysfunction (ED) diminishes quality of life for affected men and their partners. Identification of neural substrates may provide information regarding the pathophysiology of types of sexual dysfunction originating in the brain. The aim of this work is to verify the approaches of the nuclear medicine techniques in the evaluation of the erectile function/dysfunction. A search using the words ED and nuclear medicine, ED and scintigraphy, ED and SPECT and ED and PET was done in the PubMed. The number of citations in each subject was determined. Neuroimaging techniques offer insight into brain regions involved in sexual arousal and inhibition. To tackle problems such as hyposexual disorders or ED caused by brain disorders, it is crucial to understand how the human brain controls sexual arousal and penile erection. (author)

Nuclear medicine imaging technique in the erectile dysfunction evaluation: a mini-review

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Camila Godinho; Moura, Regina; Neves, Rosane de Figueiredo [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Inst. de Biologia Roberto Alcantara Gomes. Lab. de Radiofarmacia Experimental]. E-mail: cacagr@yahoo.com.br; Spinosa, Jean Pierre [Hopital de Zone, Morges (Switzerland). Dept. of Gynecology and Obstetrics; Bernardo-Filho, Mario [Instituto Nacional do Cancer, Rio de Janeiro, RJ (Brazil). Coordenadoria de Pesquisa

2007-09-15

Functional imaging with positron emission tomography and single photon emission computed tomography is capable of visualizing subtle changes in physiological function in vivo. Erectile dysfunction (ED) diminishes quality of life for affected men and their partners. Identification of neural substrates may provide information regarding the pathophysiology of types of sexual dysfunction originating in the brain. The aim of this work is to verify the approaches of the nuclear medicine techniques in the evaluation of the erectile function/dysfunction. A search using the words ED and nuclear medicine, ED and scintigraphy, ED and SPECT and ED and PET was done in the PubMed. The number of citations in each subject was determined. Neuroimaging techniques offer insight into brain regions involved in sexual arousal and inhibition. To tackle problems such as hyposexual disorders or ED caused by brain disorders, it is crucial to understand how the human brain controls sexual arousal and penile erection. (author)

A survey on reliability and safety analysis techniques of robot systems in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Eom, H S; Kim, J H; Lee, J C; Choi, Y R; Moon, S S

2000-12-01

The reliability and safety analysis techniques was surveyed for the purpose of overall quality improvement of reactor inspection system which is under development in our current project. The contents of this report are : 1. Reliability and safety analysis techniques suvey - Reviewed reliability and safety analysis techniques are generally accepted techniques in many industries including nuclear industry. And we selected a few techniques which are suitable for our robot system. They are falut tree analysis, failure mode and effect analysis, reliability block diagram, markov model, combinational method, and simulation method. 2. Survey on the characteristics of robot systems which are distinguished from other systems and which are important to the analysis. 3. Survey on the nuclear environmental factors which affect the reliability and safety analysis of robot system 4. Collection of the case studies of robot reliability and safety analysis which are performed in foreign countries. The analysis results of this survey will be applied to the improvement of reliability and safety of our robot system and also will be used for the formal qualification and certification of our reactor inspection system.

A survey on reliability and safety analysis techniques of robot systems in nuclear power plants

International Nuclear Information System (INIS)

Eom, H.S.; Kim, J.H.; Lee, J.C.; Choi, Y.R.; Moon, S.S.

2000-12-01

The reliability and safety analysis techniques was surveyed for the purpose of overall quality improvement of reactor inspection system which is under development in our current project. The contents of this report are : 1. Reliability and safety analysis techniques suvey - Reviewed reliability and safety analysis techniques are generally accepted techniques in many industries including nuclear industry. And we selected a few techniques which are suitable for our robot system. They are falut tree analysis, failure mode and effect analysis, reliability block diagram, markov model, combinational method, and simulation method. 2. Survey on the characteristics of robot systems which are distinguished from other systems and which are important to the analysis. 3. Survey on the nuclear environmental factors which affect the reliability and safety analysis of robot system 4. Collection of the case studies of robot reliability and safety analysis which are performed in foreign countries. The analysis results of this survey will be applied to the improvement of reliability and safety of our robot system and also will be used for the formal qualification and certification of our reactor inspection system

Progress in radiation protection techniques for workers in the nuclear industry

International Nuclear Information System (INIS)

Pradel, J.; Zettwoog, P.; Rouyer, J.L.

1982-01-01

The increasingly stringent safety requirements of workers and the general public in the face of occupational and in particular nuclear risks call for continual improvements in radiation protection techniques. The Institute of Protection and Nuclear Safety (IPSN), especially the Technical Protection Services belonging to the Protection Department, and also the various radiation protection services of the French Atomic Energy Commission's nuclear centres and Electricite de France (EDF) are carrying out substantial research and development programmes on the subject. For this reason, IPSN organized a specialists' meeting to take stock of the efforts being made and to try to identify what steps seem most promising or should have priority at the national level. The authors summarize the presentations and discussions on three topics: (1) Progress in the analysis of the mechanism of exposure of workers; (2) Progress achieved from the radiation protection standpoint in the field of facility design and instrumentation; and (3) Application of the optimization principle

Immunodiagnosis of parasitic infections using nuclear techniques

International Nuclear Information System (INIS)

1985-07-01

This report documents the recommendations of the ''Advisory Group on Immunodiagnosis of Parasitic Infections Using Nuclear Techniques'' with a focus on malaria, schistosomiasis and filariasis. Radionuclide tracers are considered an important component of present and future immunological methods for the assessment of the host's humoral and cellular immunity to the parasite and the detection of parasite antigen(s) in human body fluids. The Advisory Group has concluded that there is a continuing need for the development and application of immunodiagnostic methods in parasitic diseases. This report concerns methods which are currently or potentially applicable to immunodiagnostic investigations in parasitic diseases. Reference is made, where appropriate, to recent developments in research which may lead to improvement and standardization of methods now available and the development of new methodology. Separate abstracts on various papers presented were prepared

South Africa improves exclusive breastfeeding monitoring using nuclear technique

International Nuclear Information System (INIS)

Henriques, Sasha

2015-01-01

Babies in South Africa that would once be at high risk of malnutrition, disease and even death, now have brighter futures as nuclear techniques help mothers become more diligent about exclusive breastfeeding for the baby’s first six months. Breastfed children are more resistant to disease and infection compared to formula-fed children, points out the World Health Organization, which recommends that from birth up to six months of age babies should drink only breast milk. Research indicates that breastfed babies are less likely to develop diabetes, cardiovascular disease and cancer later in life.

Approximate techniques for calculating gamma ray dose rates in nuclear power plants

International Nuclear Information System (INIS)

Lahti, G.P.

1986-01-01

Although today's computers have made three-dimensional discrete ordinates transport codes a virtual reality, there is still a need for approximate techniques for estimating radiation environments. This paper discusses techniques for calculating gamma ray dose rates in nuclear power plants where Compton scattering is the dominant attenuation mechanism. The buildup factor method is reviewed; its use and misuse are discussed. Several useful rules-of-thumb are developed. The paper emphasizes the need for understanding the fundamental physics and draws heavily on the old, classic references

Nuclear techniques for analysis of coal for calorific value, ash and moisture

International Nuclear Information System (INIS)

Dains, Margaret

1976-03-01

This bibliography includes references on nuclear techniques for analysis of coal for calorific value, ash and moisture content. As the search was directed particularly towards measurement of the ash content of coal using x- and gamma-ray methods, references covering only β-ray techniques have been placed in a separate section. References from Chemical Abstracts prior vol.62 (1965) do not cite the language of the original article. The language of the original has been given for all other articles not in English. (author)

The molecular imaging approach to image infections and inflammation by nuclear medicine techniques

NARCIS (Netherlands)

Signore, Alberto; Glaudemans, Andor W. J. M.

2011-01-01

Inflammatory and infectious diseases are a heterogeneous class of diseases that may be divided into infections, acute inflammation and chronic inflammation. Radiological imaging techniques have, with the exception of functional MRI, high sensitivity but lack in specificity. Nuclear medicine

Nuclear-physical techniques for determination of boron distribution in pure materials

International Nuclear Information System (INIS)

Kadirova, M.; Jumaev, N.; Simakhin, Yu.F.; Idrisov, Kh.; Usmanova, M.M.

2001-01-01

To study deep boron diffusion in the complex silicon structures, consisting of interchange boron doping layers of mono- and polycrystalline silicon, separated by oxide films a technique of sidelong section by using Solid State Nuclear Track Detector (SSNTD) has been elaborated. The boron distribution determination technique is based on the detection of alpha particles from the 10B(n, )7Li reaction with cellulose nitrate film. The etched track registering cellulose nitrate film show the structure image magnified 1/sin fold. Boron concentration defined by density of the etched pits appearing on the film surface. An optical microscope analysis of the sample track-mapping image is realized by examination with closely spaced ( l < x/sin ) and largely spaced ( l x/sin ) movements. All these elaborated techniques can be used to investigate other solid matrix

Application of finite element numerical technique to nuclear reactor geometries

Energy Technology Data Exchange (ETDEWEB)

Rouai, N M [Nuclear engineering department faculty of engineering Al-fateh universty, Tripoli (Libyan Arab Jamahiriya)

1995-10-01

Determination of the temperature distribution in nuclear elements is of utmost importance to ensure that the temperature stays within safe limits during reactor operation. This paper discusses the use of Finite element numerical technique (FE) for the solution of the two dimensional heat conduction equation in geometries related to nuclear reactor cores. The FE solution stats with variational calculus which considers transforming the heat conduction equation into an integral equation I(O) and seeks a function that minimizes this integral and hence gives the solution to the heat conduction equation. In this paper FE theory as applied to heat conduction is briefly outlined and a 2-D program is used to apply the theory to simple shapes and to two gas cooled reactor fuel elements. Good results are obtained for both cases with reasonable number of elements. 7 figs.

Application of finite element numerical technique to nuclear reactor geometries

International Nuclear Information System (INIS)

Rouai, N. M.

1995-01-01

Determination of the temperature distribution in nuclear elements is of utmost importance to ensure that the temperature stays within safe limits during reactor operation. This paper discusses the use of Finite element numerical technique (FE) for the solution of the two dimensional heat conduction equation in geometries related to nuclear reactor cores. The FE solution stats with variational calculus which considers transforming the heat conduction equation into an integral equation I(O) and seeks a function that minimizes this integral and hence gives the solution to the heat conduction equation. In this paper FE theory as applied to heat conduction is briefly outlined and a 2-D program is used to apply the theory to simple shapes and to two gas cooled reactor fuel elements. Good results are obtained for both cases with reasonable number of elements. 7 figs

Development of high-sensitivity ultrasonic techniques for in-service inspection of nuclear reactors

International Nuclear Information System (INIS)

Linzer, M.

1977-01-01

The principal objective of the program is to develop techniques to enhance the sensitivity of ultrasonic signals which are below the random noise of the system. A secondary objective is to develop instrumentation for improved discrimination of flaw signals from background ''clutter'' and for characterization of failure-related material properties through measurements of ultrasonic parameters such as velocity and attenuation. The improved techniques will be applied to detect flaws in nuclear reactor materials and components

Nuclear security: strategies and techniques

International Nuclear Information System (INIS)

Khan, I.K.

2010-05-01

The modern society, whether in developed or in developing countries, depend on the availability of nuclear energy and on the day-to-day use of radioactive materials in medicine, agriculture, industry and for research. Before 9/11, these activities were mainly covered by safety rules regarding health and environment. Since 9/ 11, it is clear, that these activities also require adequate security. For the continued and expanded use of nuclear energy or radioactive materials, nuclear security is indispensable and an important prerequisite for successful and sustainable development. Many of our nuclear security services, expert assistance and training events, we have assisted Member States in their efforts to improve their preparedness and response capabilities and acquired a much better understanding of Member States prob and the need for further support. The end of the Cold War was marked by a shift from a bi-polar structure of global security into a more complex and unpredictable configuration of world affairs. It also brought about new security challenges, i.e. an increased probability for low-density regional, national or sub-national conflicts with new and more dispersed threats emanating from a larger number of actors, including non-state actors; terrorists or criminals. The audio-visual impact of modern media has enhanced the socio-psychological impact on a global scale of such conflicts. The number of cases of illicit trafficking in nuclear materials that were recorded since the 90's raised concern about the international physical protection regime and triggered an effort to enhance our capabilities for prevention, detection and responses regarding terrorist acts, as well as to strengthen the Convention on the Physical Protection of Nuclear Material

Nuclear medicine techniques in the assessment of alkaptonuria.

Science.gov (United States)

Vinjamuri, Sobhan; Ramesh, Chandakacharla N; Jarvis, Jonathan; Gallagher, Jim A; Ranganath, Lakshminarayana L

2011-10-01

Alkaptonuria is a rare autosomal recessive disorder due to a lack of the enzyme homogentisate dioxygenase, leading to ochronosis, a process of accumulation of a melanin-like polymer of homogentisic acid in cartilage and other collagenous structures. Patients develop severe osteoarthropathy that resembles osteoarthritis. Although the diagnosis of alkaptonuria is not particularly challenging in view of the blue-black discolouration of visible connective tissue and the presence of homogentisic acid in urine, the natural history of alkaptonuria remains poorly understood. Patients would benefit immensely from an objective assessment of their disease status and from a clearer understanding of the pathophysiology and associated physical changes. Isotope bone scans, which are commonly used to identify the extent of involvement of bones in cancerous processes, have also been increasingly used for characterizing the extent of arthropathy in conditions such as osteoarthritis and rheumatoid arthritis. Semiquantitative scores based on the extent of involvement of joints have been used to describe the involvement of large joints in the context of symptomatic treatment for osteoarthritis. A similar semiquantitative isotope bone scan score depending on the involvement of the number of large joints in patients with alkaptonuria can be formulated and validated in a suitable cohort of patients. Bone densitometry measurement using dual-energy X-ray absorptiometry scanning is an internationally accepted tool to assess the risk and extent of osteoporosis, and is increasingly used to assess the additional fracture risk in patients with arthropathy. We believe that, currently, nuclear medicine techniques can provide useful information, which can be incorporated into disease severity scores for alkaptonuria. Once the biological basis for alkaptonuria is better understood, it is feasible that nuclear medicine techniques of even greater sensitivity and specificity can be developed, thereby

Nuclear Medicine Techniques in Haematological Research: Our Experience

International Nuclear Information System (INIS)

Maktouf, C.; Bounemra, A. B.; Elbedoui, J.; Bchir, F.; Louzir, H.; Karoui, M.; Dellagi, K.

2007-01-01

Abstract Nuclear diagnostic techniques have revolutionized medicine in its different specialties, among them hematology. This is, by the more relevant routine procedures of diagnostic as well as by future trends in this field, in-vivo research and clinical applications at the biochemical level. We report a part of our experience by the use in vitro and in vivo established nuclear medicine techniques, in evaluating hematological disease for clinical research that will lead to the basic research. The first study is megaloblastic anemia in which we report a prospective study from Tunisia, northern Africa, of 478 patients with megaloblastic anemia recruited over three years period. Etiologic investigation using cobalamin and folates measurements and the Schilling test revealed that folate deficiency was very uncommon and that 95% of patients had cobalamin deficiency that was the consequence of pernicious anemia (PA) in 87%. Patients with PA had a median age at presentation of 45.5 years with 21.5% of cases occurring in patients younger than 30 years. Patients less than 20 years old should be specifically investigated for genetic defect in cobalamin absorption. In the second study, the red cell mass was determined following labeling the red blood cells with either sodium radiochromate (51Cr) and the measurement of Plasma Volume is based on dilution of the injected radioiodine (125I)-labeled human serum albumin in the blood circulation (2,3). It is important to make this differentiation, thus our patients will fulfilled the criteria of the Polycythemia Vera Study Group, and therefore we will be able to evaluate serum VEGF levels in patients with Polycythemia Vera, secondary polycythemia and idiopatic polycythemia in an attempt to investigate the involvement and significance of this cytokine in these haematological disorders.

Reliability Analysis Techniques for Communication Networks in Nuclear Power Plant

International Nuclear Information System (INIS)

Lim, T. J.; Jang, S. C.; Kang, H. G.; Kim, M. C.; Eom, H. S.; Lee, H. J.

2006-09-01

The objectives of this project is to investigate and study existing reliability analysis techniques for communication networks in order to develop reliability analysis models for nuclear power plant's safety-critical networks. It is necessary to make a comprehensive survey of current methodologies for communication network reliability. Major outputs of this study are design characteristics of safety-critical communication networks, efficient algorithms for quantifying reliability of communication networks, and preliminary models for assessing reliability of safety-critical communication networks

The application of statistical techniques to nuclear materials accountancy

International Nuclear Information System (INIS)

Annibal, P.S.; Roberts, P.D.

1990-02-01

Over the past decade much theoretical research has been carried out on the development of statistical methods for nuclear materials accountancy. In practice plant operation may differ substantially from the idealized models often cited. This paper demonstrates the importance of taking account of plant operation in applying the statistical techniques, to improve the accuracy of the estimates and the knowledge of the errors. The benefits are quantified either by theoretical calculation or by simulation. Two different aspects are considered; firstly, the use of redundant measurements to reduce the error on the estimate of the mass of heavy metal in an accountancy tank is investigated. Secondly, a means of improving the knowledge of the 'Material Unaccounted For' (the difference between the inventory calculated from input/output data, and the measured inventory), using information about the plant measurement system, is developed and compared with existing general techniques. (author)

Bivalve fouling of nuclear power plant service-water systems. Volume 2. Current status of biofouling surveillance and control techniques

International Nuclear Information System (INIS)

Daling, P.M.; Johnson, K.I.

1985-03-01

This report describes the current status of techniques for detection and control of cooling-water system fouling by bivalve mollusks at nuclear power plants. The effectiveness of these techniques is evaluated on the basis of information gathered from a literature review and in interviews with nuclear power plant personnel. Biofouling detection techniques examined in this report include regular maintenance, in-service inspection, and testing. Generally, these methods have been inadequate for detecting biofouling. Recommendations for improving biofouling detection capabilities are presented. Biofouling prevention (or control) methods that are examined in this report include intake screen systems, thermal treatment, preventive maintenance, chemical treatment alternatives, and antifoulant coatings. Recommendations for improving biofouling control methods at operating nuclear power plants are presented. Additional techniques that could be implemented at future power plants or that require further research are also described

Water in agriculture: The roles of nuclear techniques

International Nuclear Information System (INIS)

Heng, L.; Nguyen, L.

2006-01-01

Agriculture accounts for nearly seventy percent of the world's demand for fresh water. Improper management of this resource has contributed extensively to the current water scarcity and pollution problems in many parts of the world, and is a serious challenge to future food security and environmental sustainability. Addressing these issues requires an integrated approach to soilwater- plant-nutrient management at the plant-rooting zone, where water use for food and agriculture and farm management can significantly modify the quantity and quality of both surface and ground water. Nuclear technologies can contribute significantly to alleviate constraints/limitations to agricultural productivity and thus fight hunger and poverty by providing quantitative, precise, specific and dynamic information about the key components of productivity and sustainability (sources, availability, uptake and losses) of major nutrients and water. The Soil and Water Management and Crop Nutrition (SWMCN) sub-programme is assisting Member States to develop and promote the adoption of nuclear-based technologies for optimising water and nutrient management practices, which support intensification of crop production and the preservation of natural resources. To ensure food security and sustainable water management for agriculture, there is a need to produce more food per drop of water used in the agricultural sector. That is to increase both the Crop Water Productivity (CWP) and Water Use Efficiency (WUE) without any negative impact on downstream water quantity and quality. The IAEA is currently conducting CWP studies in various parts of the world (China, Kenya, Turkey and Uzbekistan) using nuclear and associated techniques to assess soil and water management and water-saving technologies to increase crop productivity and reduce crop failure for the farmers. One of these technologies is fertigation, which is the direct application of water and nutrients to plants through a drip irrigation

Nuclear techniques in animal production and health and food irradiation

International Nuclear Information System (INIS)

Cetinkaya, N.

2002-01-01

Nuclear techniques applied to animal production and health are concentrated in three main fields: Animal nutrition, reproduction and animal health. Isotopic markers, both radioactive (''1''4C, ''5 1 Cr, 32 P and 35 S) and stable ( 15 N), have been used in the development of feeding strategies by understanding the rumen fermentation process, and how protein and other nutrients are utilized to determine a balanced diet for meeting animal requirements for growth, pregnancy and lactation. The simple and easily applicable technology was developed for the preparation of a urea mineral multi nutrient block as a supplement and animal cake for the replacement of concentrate feed used by dairy cattle holders. The model was developed in Yerli Kara Cattle and its cross-breeds to estimate protein requirements of animals. Progesterone immunoassays (RIA/EIA) make it possible to control the reproductive performance of cattle, sheep and goats. A milk progesterone enzyme immunoassay kit known as Reprokon was developed at our Center. The kit has licensed by the Ministry of Agriculture and Rural Affairs. As for animal diseases, especially parasitic infections, nuclear techniques have proved to be of great value, namely in the production of irradiated vaccines against helminitic diseases. The Enzyme Linked Immunosorbent assay (ELISA) diagnostic techniques were used on the diagnosis of babesiosis, a disease which cause great economic loss in livestock in Turkey. Food irradiation is the treatment of raw, semi-processed or processed food or food ingredients with ionizing radiation to achieve a reduction of losses due to insect infestation, germination of root crops, spoilage and deterioration of perishable produce, and/or the control of microorganisms and other organisms that cause food borne diseases

A no-gold-standard technique for objective assessment of quantitative nuclear-medicine imaging methods.

Science.gov (United States)

Jha, Abhinav K; Caffo, Brian; Frey, Eric C

2016-04-07

The objective optimization and evaluation of nuclear-medicine quantitative imaging methods using patient data is highly desirable but often hindered by the lack of a gold standard. Previously, a regression-without-truth (RWT) approach has been proposed for evaluating quantitative imaging methods in the absence of a gold standard, but this approach implicitly assumes that bounds on the distribution of true values are known. Several quantitative imaging methods in nuclear-medicine imaging measure parameters where these bounds are not known, such as the activity concentration in an organ or the volume of a tumor. We extended upon the RWT approach to develop a no-gold-standard (NGS) technique for objectively evaluating such quantitative nuclear-medicine imaging methods with patient data in the absence of any ground truth. Using the parameters estimated with the NGS technique, a figure of merit, the noise-to-slope ratio (NSR), can be computed, which can rank the methods on the basis of precision. An issue with NGS evaluation techniques is the requirement of a large number of patient studies. To reduce this requirement, the proposed method explored the use of multiple quantitative measurements from the same patient, such as the activity concentration values from different organs in the same patient. The proposed technique was evaluated using rigorous numerical experiments and using data from realistic simulation studies. The numerical experiments demonstrated that the NSR was estimated accurately using the proposed NGS technique when the bounds on the distribution of true values were not precisely known, thus serving as a very reliable metric for ranking the methods on the basis of precision. In the realistic simulation study, the NGS technique was used to rank reconstruction methods for quantitative single-photon emission computed tomography (SPECT) based on their performance on the task of estimating the mean activity concentration within a known volume of interest

A no-gold-standard technique for objective assessment of quantitative nuclear-medicine imaging methods

International Nuclear Information System (INIS)

Jha, Abhinav K; Frey, Eric C; Caffo, Brian

2016-01-01

The objective optimization and evaluation of nuclear-medicine quantitative imaging methods using patient data is highly desirable but often hindered by the lack of a gold standard. Previously, a regression-without-truth (RWT) approach has been proposed for evaluating quantitative imaging methods in the absence of a gold standard, but this approach implicitly assumes that bounds on the distribution of true values are known. Several quantitative imaging methods in nuclear-medicine imaging measure parameters where these bounds are not known, such as the activity concentration in an organ or the volume of a tumor. We extended upon the RWT approach to develop a no-gold-standard (NGS) technique for objectively evaluating such quantitative nuclear-medicine imaging methods with patient data in the absence of any ground truth. Using the parameters estimated with the NGS technique, a figure of merit, the noise-to-slope ratio (NSR), can be computed, which can rank the methods on the basis of precision. An issue with NGS evaluation techniques is the requirement of a large number of patient studies. To reduce this requirement, the proposed method explored the use of multiple quantitative measurements from the same patient, such as the activity concentration values from different organs in the same patient. The proposed technique was evaluated using rigorous numerical experiments and using data from realistic simulation studies. The numerical experiments demonstrated that the NSR was estimated accurately using the proposed NGS technique when the bounds on the distribution of true values were not precisely known, thus serving as a very reliable metric for ranking the methods on the basis of precision. In the realistic simulation study, the NGS technique was used to rank reconstruction methods for quantitative single-photon emission computed tomography (SPECT) based on their performance on the task of estimating the mean activity concentration within a known volume of interest

Certification of temperature measuring techniques at thermal and nuclear power plants

International Nuclear Information System (INIS)

Preobrazhenskij, V.P.; Strigina, L.A.

1980-01-01

Necessity for metrological certification of temperature measurement techniques (TMT) at thermal and nuclear energy plants is grounded. An order of TMT certification is stated and formulae for determining the accuracy of temperature measurements by the thermoelectric method are given. It is concluded that through there are also statistical characteristics of errors of a number of measurement properties, it is necessary to carry on statistical investigations into errors of thermoelectrode extending wires, planimeters, measurement conditions. Such kind investigation technigues have been developed. Besides, it is necessary to regulate a uniform approach to the usage of statistical characteristics of errors of means and conditions of measurements to minimize volume of work for the personnel of thermal and nuclear energy plants and provide reliable estimates of temperature measurement errors

Monitoring Nuclear Facilities Using Satellite Imagery and Associated Remote Sensing Techniques

International Nuclear Information System (INIS)

Lafitte, Marc; Robin, Jean‑Philippe

2015-01-01

The mission of the European Union Satellite Centre (SatCen) is “to support the decision making and actions of the European Union in the field of the CFSP and in particular the CSDP, including European Union crisis management missions and operations, by providing, at the request of the Council or the European Union High Representative, products and services resulting from the exploitation of relevant space assets and collateral data, including satellite and aerial imagery, and related services”. The SatCen Non‑Proliferation Team, part of the SatCen Operations Division, is responsible for the analysis of installations that are involved, or could be involved, in the preparation or acquisition of capabilities intended to divert the production of nuclear material for military purposes and, in particular, regarding the spread of Weapons of Mass destruction and their means of delivery. For the last four decades, satellite imagery and associated remote sensing and geospatial techniques have increasingly expanded their capabilities. The unprecedented Very High Resolution (VHR) data currently available, the improved spectral capabilities, the increasing number of sensors and ever increasing computing capacity, has opened up a wide range of new perspectives for remote sensing applications. Concurrently, the availability of open source information (OSINF), has increased exponentially through the medium of the internet. This range of new capabilities for sensors and associated remote sensing techniques have strengthened the SatCen analysis capabilities for the monitoring of suspected proliferation installations for the detection of undeclared nuclear facilities, processes and activities. The combination of these remote sensing techniques, imagery analysis, open source investigation and their integration into Geographic Information Systems (GIS), undoubtedly improve the efficiency and comprehensive analysis capability provided by the SatCen to the EU stake‑holders. The

Quality assurance and quality control of nuclear analytical techniques

International Nuclear Information System (INIS)

Cincu, Emanuelathor

2001-01-01

Test and analytical laboratories in East and Central European countries need to prove the reliability and credibility of their economic, environmental, medical and legal decisions and their capacity of issuing reliable, verifiable reports. These demands imposed by the European Union aimed at avoiding a possible barrier to trade for the developing countries. In June 1999, in order to help Member States to develop according to EU objectives and the overall situation of the European market, IAEA launched a new co-operation programme designed to help the nuclear analytical laboratories in nuclear institutions and universities of Member States by training in the use of some Nuclear Analytical Techniques (NAT) that include: alpha, beta and gamma-ray spectrometry, radiochemical and neutron activation analysis, total reflection X-ray fluorescence. The Regional IAEA Project, named 'Quality Assurance/Quality Control of Nuclear Analytical Techniques' (NAT) aims at implementing the QA principles via a system of defined consecutive steps leading to a level on which the QA system is self-sustainable for formal accreditation or certification and satisfies the EU technical performance criteria; the requirements are in accordance with the new ISO/IEC 17025 Standard/Dec.1999 'General requirements for the competence of testing and calibration laboratories' - First edition. The Horia Hulubei National Institute for Nuclear Physics and Engineering, IFIN-HH, was admitted for participation in the IAEA Project in June 1999 account taken of its experience in the QA and metrology fields and its performance in the fields of beta and gamma-ray spectrometry, and radiochemical and neutron activation analysis, employed in both basic research and applications for external clients. Two working groups of specialists with the QA and Standardization and Metrology Departments and six analytical groups with the departments of Nuclear Applied Physics, Life Physics and Ionising Radiation Metrology are

Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

International Nuclear Information System (INIS)

1995-01-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

Seismic margin analysis technique for nuclear power plant structures

International Nuclear Information System (INIS)

Seo, Jeong Moon; Choi, In Kil

2001-04-01

In general, the Seismic Probabilistic Risk Assessment (SPRA) and the Seismic Margin Assessment(SAM) are used for the evaluation of realistic seismic capacity of nuclear power plant structures. Seismic PRA is a systematic process to evaluate the seismic safety of nuclear power plant. In our country, SPRA has been used to perform the probabilistic safety assessment for the earthquake event. SMA is a simple and cost effective manner to quantify the seismic margin of individual structural elements. This study was performed to improve the reliability of SMA results and to confirm the assessment procedure. To achieve this goal, review for the current status of the techniques and procedures was performed. Two methodologies, CDFM (Conservative Deterministic Failure Margin) sponsored by NRC and FA (Fragility Analysis) sponsored by EPRI, were developed for the seismic margin review of NPP structures. FA method was originally developed for Seismic PRA. CDFM approach is more amenable to use by experienced design engineers including utility staff design engineers. In this study, detailed review on the procedures of CDFM and FA methodology was performed

Using nuclear medicine technique in thyroid cancer diagnosis with comparison to ultrasound

International Nuclear Information System (INIS)

Chau, T.G.

2007-01-01

Full text: We used the following tests- thyroid uptake with I-131, Thyroid imaging with I-131 and Thyroid ultrasound and lymph node metastasis ultrasound. The results are as follows: 1.Thyroid uptake with I-131: This test was for the evaluation of normal thyroid tissue and function of thyroid cancer: The mean of uptake were: 12,7% at 2h and 28,53 % at 24 h after addition I-131. There was no relation to I-131 uptake with tumor size. (2) Thyroid imaging with I131: Diagnosis sensitivity was 98,1%. The cold nodules on scintigram were 92,5%. The warm nodules were 16,8%. And there were no hot nodules. (3) Thyroid ultrasound and lymph node metastasis ultrasound. Diagnosis sensitivity was 98,3%. Diagnosis sensitivity of lymph node metastasis is 94,1%, accuracy 96,6%. Nuclear medicine technique contributed very much to the diagnosis of thyroid cancer and other cancer diseases. We are using SPECT and other nuclear medicine technique in oncology diagnosis and follow-up therapy. (author)

Review study of virtual reality techniques used at nuclear issues with emphasis on Brazilian research

International Nuclear Information System (INIS)

Silva, Márcio Henrique da; Legey, Ana Paula; Mól, Antônio Carlos de A.

2016-01-01

Highlights: • A review study of virtual reality techniques used at nuclear issues is presented. • The research was performed to provide a chronological report about this subject. • The results show the development of tools that can lead to more enhanced methods. - Abstract: Some of the procedures referred to nuclear issues like evacuation training, waste management and radioactive dose assessment evaluation are related to dangerous situations where the health of the involved personnel can be compromised. For this reason, several researchers have been proposing the use of virtual reality techniques to help on performing this kind of task. Moreover, there are other applications using this type of tool which allow not only the achievement of better results in comparison to the already available procedures but also provide the development of new technologies. Therefore this work proposes to make a review study concerning to some of the applications of virtual reality techniques and concepts at nuclear issues highlighting some of the works developed in Brazil. To do so, the analyzed researches were organized according to its similarities, objectives and applicability. The goal of this survey is to provide a brief glance concerning to the information about the chronological evolution of this practice describing some of its results besides of showing prospects for further works.

Pakistan's experience in application of nuclear techniques in agriculture and environment

International Nuclear Information System (INIS)

Mujtaba Naqvi, S.H.

1981-01-01

The history of the use of nuclear techniques describes the range of activities and the practical results obtained in Pakistan so far. Agricultural research in PAEC are mutation breeding of important crops, agronomy of selected mutants, entomology, plant pathology, plant nutrition studies on macro and micro nutrients and their interactions, plant physiology and food preservation. Other activities include national and international co-operation, teaching, training and symposia. (author)

Detection of a nuclear, EBNA-type antigen in apparently EBNA-negative Herpesvirus papio (HVP)-transformed lymphoid lines by the acid-fixed nuclear binding technique.

Science.gov (United States)

Ohno, S; Luka, J; Falk, L; Klein, G

1977-12-15

In agreement with the findings of previous authors, we could not detect a virally determined nuclear antigen in Herpesvirus papio (HVP)-transformed baboon lymphoid lines by anticomplementary staining in situ, as for EBNA. However, by means of our recently developed acid-fixed nuclear binding technique an EBNA-like antigen could be readily demonstrated, after extraction from both producer and non-producer lines. We propose to designate the antigen as HUPNA. It can be detected by a human anti-EBNA antibody, suggesting cross-reactivity, if not identity, between EBNA and HUPNA. HVP-DNA carrying non-producer lines, negative for in situ ACIF stainability but capable of yielding HUPNA by the nuclear binding technique, can be superinfected with EBV, with brilliant EBNA expression as the result, suggesting that the defective in situ staining is a property associated with the baboon HVP, rather than the baboon lymphoid cell per se.

State of the art review of radioactive waste volume reduction techniques for commercial nuclear power plants

International Nuclear Information System (INIS)

1980-04-01

A review is made of the state of the art of volume reduction techniques for low level liquid and solid radioactive wastes produced as a result of: (1) operation of commercial nuclear power plants, (2) storage of spent fuel in away-from-reactor facilities, and (3) decontamination/decommissioning of commercial nuclear power plants. The types of wastes and their chemical, physical, and radiological characteristics are identified. Methods used by industry for processing radioactive wastes are reviewed and compared to the new techniques for processing and reducing the volume of radioactive wastes. A detailed system description and report on operating experiences follow for each of the new volume reduction techniques. In addition, descriptions of volume reduction methods presently under development are provided. The Appendix records data collected during site surveys of vendor facilities and operating power plants. A Bibliography is provided for each of the various volume reduction techniques discussed in the report

The use of isotopic correlation technique for determination of sup(241)Am and sup(243)Am concentration in nuclear irradiated fuels

International Nuclear Information System (INIS)

Souza Sarkis, J.E. de.

1990-01-01

In the last years the isotopic correlation technique is emerging as a powerful tool for the determination of concentration and isotopic composition of heavy nuclides in the nuclear fuel cycle. Accordingly, this technique has gained significant importance for the safeguard of the nuclear materials as well as for the accounting and build up of actinides elements in the irradiated nuclear fuels. In this work 42 isotopic correlations between the nuclides sup(241)Am and sup(243)Am and post irradiation isotopic data of 7 samples from fuel element BE-124 and 1 sample from fuel element BE-120 from the Obrigheim pressurized water nuclear power reactor, Federal Republic of Germany, were proposed. These isotopic correlations allowed to estimate the isotopic concentrations of sup(241)Am and sup(243)Am with an average deviation, relative to the experimental data obtained from isotopic dilution mass spectrometry technique, of 10%. These results are more precise than those found using the computer code ORIGEN 2 demonstrating the great potential of this technique for the determination of isotopic concentration and build up of those nuclides in irradiated nuclear fuels. The analytical and other experimental aspects of the post irradiation isotopic analysis of nuclear fuels are also discussed. (author)

Virtual reality techniques in the aid to population awareness around a nuclear waste

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Erica Cotelli; Mól, Antônio Carlos A.; Carvalho, Paulo Victor R.; Machado, Daniel Mol; Chelles, Daniel, E-mail: mol@ien.gov.br, E-mail: Erica.cotelli.2017@gmail.com, E-mail: machado.mol@gmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Santo, André C. E.; Legey, Ana Paula, E-mail: cotelli.andre@gmail.com [Centro Universitário Carioca (UniCarioca), Rio de Janeiro, RJ (Brazil)

2017-07-01

Nuclear energy has proved to be an extremely important source of energy for today's society. However, these achievements, even present in people's daily lives, often go unnoticed and suffer rejection by the same society that enjoys such contributions. Rejection, mainly due to the lack of information. In this context, this work used Virtual Reality technology to inform and make the population aware of the benefits and disadvantages of nuclear energy. For this purpose, an interactive virtual environment was produced that allowed the exploration of a nuclear waste repository. Subsequently, an educational video was developed to provide end-user information support. Finally, an educational game was also created with the aim of raising public awareness and demystifying the nuclear area by bringing knowledge, in a clear and engaging way, to the population around a nuclear repository. The developed environment allowed the user to walk through the virtual representation of the reject repository, and also enabled the creation of a video capable of transmitting the initial information and improving the spatial comprehension of the model as a whole. In conclusion, the tool developed in the present work has the capacity to assist in the production of nuclear projects before even entering the construction phase. In addition, it is possible to apply this technique to inform the population about the nuclear practices that will be applied, providing a greater involvement of the people and, consequently, a better assimilation of knowledge about nuclear energy. (author)

Virtual reality techniques in the aid to population awareness around a nuclear waste

International Nuclear Information System (INIS)

Aguiar, Erica Cotelli; Mól, Antônio Carlos A.; Carvalho, Paulo Victor R.; Machado, Daniel Mol; Chelles, Daniel; Santo, André C. E.; Legey, Ana Paula

2017-01-01

Nuclear energy has proved to be an extremely important source of energy for today's society. However, these achievements, even present in people's daily lives, often go unnoticed and suffer rejection by the same society that enjoys such contributions. Rejection, mainly due to the lack of information. In this context, this work used Virtual Reality technology to inform and make the population aware of the benefits and disadvantages of nuclear energy. For this purpose, an interactive virtual environment was produced that allowed the exploration of a nuclear waste repository. Subsequently, an educational video was developed to provide end-user information support. Finally, an educational game was also created with the aim of raising public awareness and demystifying the nuclear area by bringing knowledge, in a clear and engaging way, to the population around a nuclear repository. The developed environment allowed the user to walk through the virtual representation of the reject repository, and also enabled the creation of a video capable of transmitting the initial information and improving the spatial comprehension of the model as a whole. In conclusion, the tool developed in the present work has the capacity to assist in the production of nuclear projects before even entering the construction phase. In addition, it is possible to apply this technique to inform the population about the nuclear practices that will be applied, providing a greater involvement of the people and, consequently, a better assimilation of knowledge about nuclear energy. (author)

Nuclear analytical techniques applied to forensic chemistry

International Nuclear Information System (INIS)

Nicolau, Veronica; Montoro, Silvia; Pratta, Nora; Giandomenico, Angel Di

1999-01-01

Gun shot residues produced by firing guns are mainly composed by visible particles. The individual characterization of these particles allows distinguishing those ones containing heavy metals, from gun shot residues, from those having a different origin or history. In this work, the results obtained from the study of gun shot residues particles collected from hands are presented. The aim of the analysis is to establish whether a person has shot a firing gun has been in contact with one after the shot has been produced. As reference samples, particles collected hands of persons affected to different activities were studied to make comparisons. The complete study was based on the application of nuclear analytical techniques such as Scanning Electron Microscopy, Energy Dispersive X Ray Electron Probe Microanalysis and Graphite Furnace Atomic Absorption Spectrometry. The essays allow to be completed within time compatible with the forensic requirements. (author)

Conference on Nuclear and Conventional Analytical Techniques and their Applications

International Nuclear Information System (INIS)

2010-01-01

Full text : A panoply analytic techniques methods has emerged in recent decades due to the challenges of society in quality of products and the increasing demand of chemical analysis services. The industrial progress which came along with an instrumental perfection of devices with analytical use, led to the development of new techniques more and more advanced in this field. These come as well, to answer the disturbing effects of this industrialization and the wishes of a public increasingly conscious and requiring globally. The leaders in this field of analysis and material characterization are more than ever confronted with problems of identification and quantification of different chemical forms of a multitude of products in varied circles; Industrial pollutants, soil, water, air, food, medicines, ceramics, concrete, plants etc. It was from that perspective that the unifying theme ''geomaterials: characterization to applications '' of the conference on nuclear and conventional analytical techniques and their applications (TANCA 2010) was chosen. It contributes to the debate of these subjects and builds relationships between stakeholders in this field, both technically and practically [fr

Annual Report on Scientific Activities in 1997 of Department of Physics and Nuclear Techniques, Academy of Mining and Metallurgy, Cracow

International Nuclear Information System (INIS)

Wolny, J.; Olszynska, E.

1998-01-01

The Annual Report 1997 is the review of scientific activities of the Department of Nuclear Physics and Techniques (DNPT) of the Academy of Mining and Metallurgy, Cracow. The studies connected with: radiometric analysis, nuclear electronics, solid state physics, elementary particle and detectors, medical physics, physics of environment, theoretical physics, nuclear geophysics, energetic problems, industrial radiometry and tracer techniques have been broadly presented. The fill list of works being published and presented at scientific conferences in 1997 by the staff of DNPT are also included

Ultrasonic Phased Array Techniques for Detection of Flaws of Stud Bolts in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Joon Hyun; Choi, Sang Woo

2006-01-01

The reactor vessel body and closure head are fastened with the stud bolt that is one of crucial parts for safety of the reactor vessels in nuclear power plants. It is reported that the stud bolt is often experienced by fatigue cracks initiated at threads. Stud bolts are inspected by the ultrasonic technique during the overhaul periodically for the prevention of failure which leads to radioactive leakage from the nuclear reactor. The conventional ultrasonic inspection for stud bolts was mainly conducted by reflected echo method based on shadow effect. However, in this technique, there were numerous spurious signals reflected from every oblique surfaces of the thread. In this study, ultrasonic phased array technique was applied to investigate detectability of flaws in stud bolts and characteristics of ultrasonic images corresponding to different scanning methods, that is, sector and linear scan. For this purpose, simplified stud bolt specimens with artificial defects of various depths were prepared

On stable ground: Tackling soil erosion with nuclear techniques in Viet Nam

International Nuclear Information System (INIS)

Gaspar, Miklos

2015-01-01

Dao Thanh Canh never studied physics or chemistry in school, but he understands a thing or two about nuclear isotopes. Until a couple of years ago, much of his five acre farm on the hills of central Viet Nam was gradually sliding away. Thanks to nuclear techniques used in determining the exact cause and source of soil erosion, his land is now stable, and his coffee plantation profitable. “We were very worried as uncertainty loomed,” he said. “A few centimetres of the soil disappeared every year when we had big hail storms.” Thanh Canh is not alone. Soil degradation affects 1.9 billion hectares of land worldwide, close to two thirds of global soil resources.

Network modeling and analysis technique for the evaluation of nuclear safeguards systems effectiveness

International Nuclear Information System (INIS)

Grant, F.H. III; Miner, R.J.; Engi, D.

1978-01-01

Nuclear safeguards systems are concerned with the physical protection and control of nuclear materials. The Safeguards Network Analysis Procedure (SNAP) provides a convenient and standard analysis methodology for the evaluation of safeguards system effectiveness. This is achieved through a standard set of symbols which characterize the various elements of safeguards systems and an analysis program to execute simulation models built using the SNAP symbology. The reports provided by the SNAP simulation program enable analysts to evaluate existing sites as well as alternative design possibilities. This paper describes the SNAP modeling technique and provides an example illustrating its use

Modeling and numerical techniques for high-speed digital simulation of nuclear power plants

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Mallen, A.N.

1987-01-01

Conventional computing methods are contrasted with newly developed high-speed and low-cost computing techniques for simulating normal and accidental transients in nuclear power plants. Six principles are formulated for cost-effective high-fidelity simulation with emphasis on modeling of transient two-phase flow coolant dynamics in nuclear reactors. Available computing architectures are characterized. It is shown that the combination of the newly developed modeling and computing principles with the use of existing special-purpose peripheral processors is capable of achieving low-cost and high-speed simulation with high-fidelity and outstanding user convenience, suitable for detailed reactor plant response analyses

Network modeling and analysis technique for the evaluation of nuclear safeguards systems effectiveness

International Nuclear Information System (INIS)

Grant, F.H. III; Miner, R.J.; Engi, D.

1979-02-01

Nuclear safeguards systems are concerned with the physical protection and control of nuclear materials. The Safeguards Network Analysis Procedure (SNAP) provides a convenient and standard analysis methodology for the evaluation of safeguards system effectiveness. This is achieved through a standard set of symbols which characterize the various elements of safeguards systems and an analysis program to execute simulation models built using the SNAP symbology. The reports provided by the SNAP simulation program enable analysts to evaluate existing sites as well as alternative design possibilities. This paper describes the SNAP modeling technique and provides an example illustrating its use

Development of nuclear power plant diagnosis technique using neural networks

International Nuclear Information System (INIS)

Horiguchi, Masahiro; Fukawa, Naohiro; Nishimura, Kazuo

1991-01-01

A nuclear power plant diagnosis technique has been developed, called transient phenomena analysis, which employs neural network. The neural networks identify malfunctioning equipment by recognizing the pattern of main plant parameters, making it possible to locate the cause of an abnormality when a plant is in a transient state. In a case where some piece of equipment shows abnormal behavior, many plant parameters either directly or indirectly related to that equipment change simultaneously. When an abrupt change in a plant parameter is detected, changes in the 49 main plant parameters are classified into three types and a characteristic change pattern consisting of 49 data is defined. The neural networks then judge the cause of the abnormality from this pattern. This neural-network-based technique can recognize 100 patterns that are characterized by the causes of plant abnormality. (author)

Measurement techniques in dry-powdered processing of spent nuclear fuels

International Nuclear Information System (INIS)

Bowers, D. L.; Hong, J.-S.; Kim, H.-D.; Persiani, P. J.; Wolf, S. F.

1999-01-01

High-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICPMS) detection, α-spectrometry (α-S), and γ-spectrometry (γ-S) were used for the determination of nuclide content in five samples excised from a high-burnup fuel rod taken from a pressurized water reactor (PWR). The samples were prepared for analysis by dissolution of dry-powdered samples. The measurement techniques required no separation of the plutonium, uranium, and fission products. The sample preparation and analysis techniques showed promise for in-line analysis of highly-irradiated spent fuels in a dry-powdered process. The analytical results allowed the determination of fuel burnup based on 148 Nd, Pu, and U content. A goal of this effort is to develop the HPLC-ICPMS method for direct fissile material accountancy in the dry-powdered processing of spent nuclear fuel

Co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes

International Nuclear Information System (INIS)

1991-01-01

A co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes was started by the IAEA in December 1987 and now comprises twenty-three participants from twenty-one countries. Topics of interest in this programme include studies of atmospheric aerosols, coal fly ash, incinerator ash, sewage sludge and a variety of other environmental specimens contaminated with solid wastes. The analytical techniques used include neutron activation analysis, particle-induced X-ray emission and energy-dispersive X-ray fluorescence. This report summarizes the discussions that took place during the second research co-ordination meeting. Working papers presented by the participants are included as annexes and have been indexed separately. Refs, figs and tabs

Co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes

International Nuclear Information System (INIS)

1992-01-01

A co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes was started by the IAEA in December 1987 and now comprises nineteen participants from seventeen countries. Topics of interest in this programme include studies of atmospheric aerosols, coal fly ash, incinerator ash, sewage sludge and a variety of other environmental specimens contaminated with solid wastes. The analytical techniques used include neutron activation analysis, particle-induced X-ray emission and energy-dispersive X-ray fluorescence. This report summarizes the discussions that took place during the third research co-ordination meeting. Working papers presented by the participants are included as annexes and have been indexed separately. Refs, figs and tabs

Nuclear techniques for in situ evaluation of coal and mineral deposits

International Nuclear Information System (INIS)

Borsaru, M.

1993-01-01

This paper reviews developments in in situ analysis of minerals and coal by nuclear borehole logging. Developments in the oil, gas and uranium industries are not discussed in the present paper unless they have direct applications in the mineral industry (e.g. multi-element analysis and development of spectral litho-density tools). The review covers techniques developed mostly in the last decade and is based on work published in North America, Europe and Australia. (author)

Development of nuclear fuel microsphere handling techniques and equipment

International Nuclear Information System (INIS)

Mack, J.E.; Suchomel, R.R.; Angelini, P.

1979-01-01

Considerable progress has been made in the development of microsphere handling techniques and equipment for nuclear applications. Work at Oak Ridge National Laboratory with microspherical fuel forms dates back to the early sixties with the development of the sol-gel process. Since that time a number of equipment items and systems specifically related to microsphere handling and characterization have been identified and developed for eventual application in a remote recycle facility. These include positive and negative pressure transfer systems, samplers, weighers, a blender-dispenser, and automated devices for particle size distribution and crushing strength analysis. The current status of these and other components and systems is discussed

Use of nuclear techniques in studies of soil-plant relationships

International Nuclear Information System (INIS)

Hardarson, G.

1990-01-01

The major limitation facing researchers in the developing countries when trying to benefit from the use of isotope and radiation methods for solving problems in their countries is the lack of technical information. Training courses are very efficient for transferring technology to the developing countries. The Soil Fertility, Irrigation and Crop Production Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture and the Soil Science Unit of the IAEA Seibersdorf Laboratory have technical responsibility for organizing training courses on the use of isotopes in soil fertility and plant nutrition research. These courses have been held annually since 1978 until the present with two additional specialized courses conducted in the years 1985 and 1986 on biological nitrogen fixation. This manual was compiled from some of the lectures and practical exercises presented at these courses. Contents: Stable and radioactive isotopes. Field experimentation in isotope-aided studies. Sample preparation techniques of biological material for isotope analysis. Methods for 15 N determination. Isotope techniques in soil fertility and plant nutrition studies. Use of 15 N methodology to assess biological nitrogen fixation. Techniques in studies of photosynthesis. Use of neutron water and gamma density gauges in soil water studies. Refs, figs and tabs

Development of nuclear microfilters using the fission tracks registration technique

International Nuclear Information System (INIS)

Yamasaki, I.M.; Geraldo, L.P.

1990-10-01

Nuclear microfilters with mean pores diameter in the range from 1.9 to 10.6 μm have been produced using the fission tracks registration technique in Makrofol KG (8 μm thickness). Fluctuations around 11% and 10% were obtained respectively for the pores size and pores uniformity in the analysis of a typical sample of microfilter. The essential features of the microfilters were similar to those ones, commercially known as Nuclepore and thus they may be routinely employed in the several applications areas of the Industry and Biology. (author)

Nuclear and related techniques in the control of communicable diseases

International Nuclear Information System (INIS)

1991-07-01

The IAEA has a programme component entitled ''Nuclear Techniques in Communicable Diseases'', the aims of which are to encourage research in the development of new methods of controlling communicable diseases and to transfer the technology to institutes in endemic regions. Implementation of the programme component includes information exchange through publications, symposiums and seminars. The two most recent seminars were held in Bombay in November 1988 and Belo Horizonte in November 1989, and a selection of the papers presented have been published in this Technical Document. Refs, figs and tabs

Status report on the application of process noise technique in nuclear power plants

International Nuclear Information System (INIS)

Espefaelt, R.; Aakerhielm, F.

1979-09-01

The report gives a survey of applications of noise technique reported for nuclear power plants. The scope has been limited to areas of interest for BWR and PWR plants of the types found in Sweden and with an emphasis on cases where the practical applicability has been clearly demonstrated. (author)

Project 'Use of nuclear techniques in investigation, conservation and management of the cultural historical patrimony

International Nuclear Information System (INIS)

Kochmann, Sonnia

2000-12-01

This project is aimed at solving problems of conservation of the cultural historical patrimony through the active participation of the member countries of ARCAL by the application of Analytic Nuclear Techniques [es

Proposal for Analysis of the Safeguarded Nuclear Materials 235U and 239Pu by Delayed Neutrons Technique

International Nuclear Information System (INIS)

El-Mongy, S.A.

2000-01-01

This paper introduces, describes and initiates a very sensitive and rapid non-destructive technique to be used for analysis of the safeguarded nuclear materials 235 U and 239 Pu. The technique is based on fission of the nuclear material by neutrons and then measuring the delayed neutrons produced from the neutron rich fission products. By this technique, fissile isotope content ( 235 U) can be determined in the presence of the other fissile (e.g. 239 Pu) or fertile isotopes (e.g. 238 U) in fresh and spent fuel. The time consumed for analysis of bulk materials by this technique is only 4 minutes. The method is also used for analysis of uranium in rock, sediment, soil, meteorites, lunar, biological, urine, archaeological, zircon sand and seawater samples. The method enables uranium in a sample to be measured without respect to its oxidation state, organic and inorganic elements

Nuclear techniques for toxic elements in foodstuffs. Report on an IAEA co-ordinated research programme

International Nuclear Information System (INIS)

1994-01-01

The document includes 10 final reports on the IAEA Co-ordinated Research Programme on Nuclear Techniques for Toxic Elements in Foodstuffs. A separate abstract was prepared for each report. Refs, figs and tabs

Nuclear techniques for toxic elements in foodstuffs. Report on an IAEA co-ordinated research programme

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The document includes 10 final reports on the IAEA Co-ordinated Research Programme on Nuclear Techniques for Toxic Elements in Foodstuffs. A separate abstract was prepared for each report. Refs, figs and tabs.

The particle analysis based on FT-TIMS technique for swipe sample under the frame of nuclear safeguard

International Nuclear Information System (INIS)

Yang Tianli; Liu Xuemei; Liu Zhao; Tang Lei; Long Kaiming

2008-06-01

Under the frame of nuclear safeguard, the particles analysis for swipe sample is an advance mean to detect the undeclared uranium enriched facilities and undeclared uranium enriched activity. The technique of particle analysis based on fission track-thermal ionization mass spectrometry (FT-TIMS) for swipe sample have been built. The reliability and the experimental background for selecting particles consisting of uranium from swipe sample by FT method have been verified. In addition, the utilization coefficient of particles on the surface of swipe sample have also been tested. These works have provided the technique support for application in the area of nuclear verification. (authors)

Nuclear techniques in the control of parasitic infections

International Nuclear Information System (INIS)

Mulligan, W.

1976-01-01

The development of radiation-attenuated vaccines against economically important parasitic diseases of farm animals has met with mixed success. Examples are presented ranging from the highly effective and much used commercial vaccine against cattle lungworm to the almost completely unsuccessful attempts to immunize sheep against liver fluke. The results presented emphasize that this approach is likely to be successful only if there is evidence of a strong degree of acquired immunity to the natural infection. The extension of immunological control to those systems where the parasite provokes only a modest resistance by the host will probably depend on a much greater understanding of the mechanism of the immune response. Such fundamental studies are likely to rely heavily on nuclear techniques, e.g. in the labelling of antigens, antibodies and parasites with radioactive isotopes. (author)

Convergent engineering techniques for management of nuclear processes

International Nuclear Information System (INIS)

Carabulea, A.; Popa, I.

1995-01-01

The paper briefly presents the concept of convergent arhemo-systematical engineering, its advantages in comparison with classical methods of research, design, manufacture. The convergent engineering application supposes the usage of the advanced methods, techniques and equipment corresponding to the domain and specific for the corresponding branch of computer science. Starting from the convergent engineering principles and concept, the paper proposes two models applicable for new products and also for improving and optimizing the existing ones. The models are based on two levels of feedback corresponding to two levels of control and they assume the utilization of expert and robot-expert systems. The economical efficiency of the application of the convergent engineering method is evaluated for the case of a nuclear power plant by calculation the main technical and economical indicators. (Author) 2 Figs., 5 Refs

Handbook of software quality assurance techniques applicable to the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Bryant, J.L.; Wilburn, N.P.

1987-08-01

Pacific Northwest Laboratory is conducting a research project to recommend good engineering practices in the application of 10 CFR 50, Appendix B requirements to assure quality in the development and use of computer software for the design and operation of nuclear power plants for NRC and industry. This handbook defines the content of a software quality assurance program by enumerating the techniques applicable. Definitions, descriptions, and references where further information may be obtained are provided for each topic.

Handbook of software quality assurance techniques applicable to the nuclear industry

International Nuclear Information System (INIS)

Bryant, J.L.; Wilburn, N.P.

1987-08-01

Pacific Northwest Laboratory is conducting a research project to recommend good engineering practices in the application of 10 CFR 50, Appendix B requirements to assure quality in the development and use of computer software for the design and operation of nuclear power plants for NRC and industry. This handbook defines the content of a software quality assurance program by enumerating the techniques applicable. Definitions, descriptions, and references where further information may be obtained are provided for each topic

Atomic and nuclear analytical methods. XRF, Moessbauer, XPS, NAA and ion-beam spectroscopic techniques

International Nuclear Information System (INIS)

Verma, H.R.

2007-01-01

This book is a blend of analytical methods based on the phenomenon of atomic and nuclear physics. It comprises comprehensive presentations about X-ray Fluorescence (XRF), Moessbauer Spectroscopy (MS), X-ray Photoelectron Spectroscopy (XPS), Neutron- Activation Analysis (NAA), Particle Induced X-ray Emission Analysis (PIXE), Rutherford Backscattering Analysis (RBS), Elastic Recoil Detection (ERD), Nuclear Reaction Analysis (NRA), Particle Induced Gamma-ray Emission Analysis (PIGE), and Accelerator Mass Spectrometry (AMS). These techniques are commonly applied in the fields of medicine, biology, environmental studies, archaeology or geology et al. and pursued in major international research laboratories. (orig.)

Nuclear analytical techniques for nanotoxicology studies

International Nuclear Information System (INIS)

Zhang, Z.Y.; Zhao, Y.L.; Chai, Z.F.

2011-01-01

With the rapid development of nanotechnology and its applications, a wide variety of nanomaterials are now used in commodities, pharmaceutics, cosmetics, biomedical products, and industries. The potential interactions of nanomaterials with living systems and the environment have attracted increasing attention from the public, as well as from manufacturers of nanomaterial-based products, academic researchers and policymakers. It is important to consider the environmental, health and safety aspects at an early stage of nanomaterial development and application in order to more effectively identify and manage potential human and environmental health impacts from nanomaterial exposure. This will require research in a range of areas, including detection and characterization, environmental fate and transport, ecotoxicology and toxicology. Nuclear analytical techniques (NATs) can play an important role in such studies due to their intrinsic merits such as high sensitivity, good accuracy, high space resolution, ability to distinguish the endogenous or exogenous sources of materials, and ability of in situ and in vivo analysis. In this paper, the applications of NATs in nanotoxicological and nano-ecotoxicological studies are outlined, and some recent results obtained in our laboratory are reported. (orig.)

Locating techniques for nuclear power stations

International Nuclear Information System (INIS)

Hayashi, Masao

1983-01-01

The basic thought in locating nuclear power stations is to examine carefully the suitability of sites and the safety of plants, and in the end, to perfect the safety of public. In Japan, effort is exerted to obtain the trust of local people by carrying out investigation, research and examination from respective standpoints of the government, institutes and industries. The author has engaged in the standardization of the investigation, test and analysis regarding the aseismatic capability of ground, the verifying project in Tadotsu of the coupled vibration of ground and structures, the evaluation of the performance of large vibration tables, the future concept of new locating procedure and so on in the last more than ten years. The technological classification of ground, the technological meaning of active faults, the procedure of the aseismatic design of plants, the difference of earthquake input force according to various locating methods, 12 rules regarding the attenuation of vibration of ground, and the concept of new locating method in the 21st century are explained. As the new locating techniques applicable to central Japan, diluvial ground location, floating location in tunnels, underground location, offshore location and so on must be promoted. (Kako, I.)

The application of PSA techniques to the vital area identification of nuclear power plants

International Nuclear Information System (INIS)

Ha, Jae Joo; Jung, Woo Sik; Park, Chang Kue

2005-01-01

This paper presents a Vital Area Identification (VAI) method based on the current Fault Tree Analysis (FTA) and Probabilistic Safety Assessment (PSA) techniques for the physical protection of nuclear power plants. A structured framework of a Top Event Prevention set Analysis (TEPA) application to the VAI of nuclear power plants is also delineated. One of the important processes for physical protection in a nuclear power plant is VIA that is a process for identifying areas containing nuclear materials, Structures, Systems or Components (SSCs) to be protected from sabotage, which could directly or indirectly lead to core damage and unacceptable radiological consequences. A software VIP (Vital area Identification Package based on the PSA method) is being developed by KAERI for the VAI of nuclear power plants. Furthermore, the KAERI fault tree solver FTREX (Fault Tree Reliability Evaluation eXpert) is specialized for the VIP to generate the candidates of the vital areas. FTREX can generate numerous MCSs for a huge fault tree with the lowest truncation limit and all possible prevention sets

Time stamp technique using a nuclear emulsion multi-stage shifter for gamma-ray telescope

International Nuclear Information System (INIS)

Takahashi, Satoru; Aoki, Shigeki; Rokujo, Hiroki; Hamada, Kaname; Komatsu, Masahiro; Morishima, Kunihiro; Nakamura, Mitsuhiro; Nakano, Toshiyuki; Niwa, Kimio; Sato, Osamu; Yoshioka, Teppei; Kodama, Koichi

2010-01-01

Nuclear emulsion has a potential use as a gamma-ray telescope with high angular resolution. For this application it is necessary to know the time when each track was recorded in the emulsion. In previous experiments using nuclear emulsion, various efforts were used to associate time to nuclear emulsion tracks and to improve the time resolution. Using a high speed readout system for nuclear emulsion together with a clock-based multi-stage emulsion shifter, we invented a technique to give a time-stamp to emulsion tracks and greatly improve the time resolution. A test experiment with a 2-stage shifter was used to demonstrate the principle of multi-stage shifting, and we achieved a time resolution 1.5 s for 12.1 h (about 1 part in 29 000) with the time stamp reliability 97% and the time stamp efficiency 98%. This multi-stage shifter can achieve the time resolution required for a gamma-ray telescope and can also be applied to another cosmic ray observations and accelerator experiments using nuclear emulsion.

Available post-irradiation examination techniques at Romanian institute for nuclear research

International Nuclear Information System (INIS)

Parvan, Marcel; Sorescu, Antonius; Mincu, Marin; Uta, Octavian; Dobrin, Relu

2005-01-01

The Romanian Institute for Nuclear Research (INR) has a set of nuclear facilities consisting of TRIGA 14 MW(th) materials testing reactor and LEPI (Romanian acronym for post-irradiation examination laboratory) which enable to investigate the behaviour of the nuclear fuel and materials under various irradiation conditions. The available techniques of post-irradiation examination (PIE) and purposes of PIE for CANDU reactor fuel are as follows. 1) Visual inspection and photography by periscope: To examine the surface condition such as deposits, corrosion etc. 2) Eddy current testing: To verify the cladding integrity. 3) Profilometry and length measurement performed both before and after irradiation: To measure the parameters which highlight the dimensional changes i.e. diameter, length, diametral and axial sheath deformation, circumferential sheath ridging height, bow and ovality. 4) Gamma scanning and Tomography: To determine the burnup, axial and radial fission products activity distribution and to check for flux peaking and loading homogeneity. 5) Puncture test: To measure the pressure, volume and composition of fission gas and the inner free volume. 6) Optical microscopy: To highlight the structural changes and hydriding, to examine the condition of the fuel-sheath interface and to measure the oxide thickness and Vickers microhardness. 7) Mass spectrometry: To measure the burnup. 8) Tensile testing: To check the mechanical properties. So far, non-destructive and destructive post-irradiation examinations have been performed on a significant number of CANDU fuel rods (about 100) manufactured by INR and irradiated to different power histories in the INR 14 MW(th) TRIGA reactor. These examinations have been performed as part of the Romanian research programme for the manufacturing, development and safety of the CANDU fuel. The paper describes the PIE techniques and some results. (Author)

Nuclear techniques to assess irrigation schedules for field crops. Results of a co-ordinated research programme

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

This TECDOC summarizes the results of a Co-ordinated Research Programme on The Use of Nuclear and Related Techniques in Assessment of Irrigation Schedules of Field Crops to Increase Effective Use of Water in Irrigation Projects. The programme was carried out between 1990 and 1995 through the technical co-ordination of the Soil Fertility, Irrigation and Crop Production Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture of the International Atomic Energy Agency. Fourteen Member States of the IAEA and FAO carried out a series of field experiments aimed at improving irrigation water use efficiency through a type of irrigation scheduling known as deficit irrigation. Refs, figs, tabs.

Nuclear techniques to assess irrigation schedules for field crops. Results of a co-ordinated research programme

International Nuclear Information System (INIS)

1996-06-01

This TECDOC summarizes the results of a Co-ordinated Research Programme on The Use of Nuclear and Related Techniques in Assessment of Irrigation Schedules of Field Crops to Increase Effective Use of Water in Irrigation Projects. The programme was carried out between 1990 and 1995 through the technical co-ordination of the Soil Fertility, Irrigation and Crop Production Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture of the International Atomic Energy Agency. Fourteen Member States of the IAEA and FAO carried out a series of field experiments aimed at improving irrigation water use efficiency through a type of irrigation scheduling known as deficit irrigation. Refs, figs, tabs

A study of air and water pollution by means of nuclear techniques

International Nuclear Information System (INIS)

Zhang Guilin

2001-01-01

The atmospheric aerosols and water pollution in Shanghai were studied by the nuclear microprobe, then the pattern recognition technique was applied to trace the emitter source of aerosol particles. Three iron-containing atmospheric aerosols collected from different area zone were analyzed by Moessbauer spectroscopy, their chemical composition, size of particles and concentration were determined. The intensities of α, β radioactivity were determined by a low background detector

Inorganic membranes for separative techniques: from uranium isotope separation to non-nuclear fields

International Nuclear Information System (INIS)

Charpin, J.; Rigny, P.

1989-01-01

Uranium enrichment leads to the development of inorganic porous barriers - either ceramic or metallic. A wide range of these products had considerable potential for the improvement of filtration techniques in liquid media (ultrafiltration and microfiltration). This is how a new generation of inorganic membranes was created reputed for their performance and especially for their lifetime and their behaviour (mechanical and temperature stability, corrosion resistance). These membranes now have a respectable position in applications in the agro-food biotechnology industries, to give only two examples. Before the non-nuclear applications of inorganic membranes are presented, their success in the nuclear power industry are pointed out

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: vasconv@cdtn.br; reissc@cdtn.br; aclc@cdtn.br; Jordao, Elizabete [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Quimica]. E-mail: bete@feq.unicamp.br

2008-07-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da; Jordao, Elizabete

2008-01-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

Attempts to develop a new nuclear measurement technique of β-glucuronidase levels in biological samples

International Nuclear Information System (INIS)

Unak, T.; Avcibasi, U.; Yildirim, Y.; Cetinkaya, B.

2003-01-01

β-Glucuronidase is one of the most important hydrolytic enzymes in living systems and plays an essential role in the detoxification pathway of toxic materials incorporated into the metabolism. Some organs, especially liver and some tumour tissues, have high level of β-glucuronidase activity. As a result the enzymatic activity of some kind of tumour cells, the radiolabelled glucuronide conjugates of cytotoxic, as well as radiotoxic compounds have potentially very valuable diagnostic and therapeutic applications in cancer research. For this reason, a sensitive measurement of β-glucuronidase levels in normal and tumour tissues is a very important step for these kinds of applications. According to the classical measurement method of β-glucuronidase activity, in general, the quantity of phenolphthalein liberated from its glucuronide conjugate, i.e. phenolphthalein-glucuronide, by β-glucuronidase has been measured by use of the spectrophotometric technique. The lower detection limit of phenolphthalein by the spectrophotometric technique is about 1-3 mg. This means that the β-glucuronidase levels could not be detected in biological samples having lower levels of β-glucuronidase activity and therefore the applications of the spectrophotometric technique in cancer research are very seriously limited. Starting from this consideration, we recently attempted to develop a new nuclear technique to measure much lower concentrations of β-glucuronidase in biological samples. To improve the detection limit, phenolphthalein-glucuronide and also phenyl-N-glucuronide were radioiodinated with 131 I and their radioactivity was measured by use of the counting technique. Therefore, the quantity of phenolphthalein or aniline radioiodinated with 131 I and liberated by the deglucuronidation reactivity of β-glucuronidase was used in an attempt to measure levels lower than the spectrophotometric measurement technique. The results obtained clearly verified that 0.01 pg level of

Techniques for nuclear and particle physics experiments. 2. rev. ed.

International Nuclear Information System (INIS)

Leo, W.R.

1992-01-01

This book is an outgrowth of an advanced laboratory course in experimental nuclear and particle physics the author gave to physics majors at the University of Geneva during the years 1978- 1983. The course was offered to third and fourth year students, the latter of which had, at this point in their studies, chosen to specialize in experimental nuclear or particle physics. This implied that they would go on to do a 'diplome' thesis with one of the high- or intermediate-energy research groups in the physics department. The format of the course was such that the students were required to concentrate on only one experiment during the trimester, rather than perform a series of experiments as is more typical of a traditional course of this type. Their tasks thus included planning the experiment, learning the relevant techniques, setting up and troubleshooting the measuring apparatus, calibration, data-taking and analysis, as well as responsibility for maintaining their equipment, i.e., tasks resembling those in a real experiment. This more intensive involvement provided the students with a better understanding of the experimental problems encountered in a professional experiment and helped instill a certain independence and confidence which would prepare them for entry into a research group in the department. Teaching assistants were presented to help the students during the trimester and a series of weekly lectures was also given on various topics in experimental nuclear and particle physics. This included general information on detectors, nuclear electronics, statistics, the interaction of radiation in matter, etc., and a good deal of practical information for actually doing experiments. (orig.) With 254 figs

Communication techniques and nuclear energy; Tecnicas de comunicacion y energia nuclear

Energy Technology Data Exchange (ETDEWEB)

Carpintero Santamaria, N.

2005-07-01

The paper presents some thoughts on several factors related to nuclear energy and the way they are presented by the mass media, usually provoking controversy to the Spanish society and thus, undermining public acceptance. Some possibilities for boosting nuclear energy among public opinion are suggested, emphasizing the fact that nuclear power is essential because it is both ecologically and economically sound. (Author)

Development and comparision of techniques for estimating design basis flood flows for nuclear power plants

International Nuclear Information System (INIS)

1980-05-01

Estimation of the design basis flood for Nuclear Power Plants can be carried out using either deterministic or stochastic techniques. Stochastic techniques, while widely used for the solution of a variety of hydrological and other problems, have not been used to date (1980) in connection with the estimation of design basis flood for NPP siting. This study compares the two techniques against one specific river site (Galt on the Grand River, Ontario). The study concludes that both techniques lead to comparable results , but that stochastic techniques have the advantage of extracting maximum information from available data and presenting the results (flood flow) as a continuous function of probability together with estimation of confidence limits. (author)

Risk estimation in association with diagnostic techniques in the nuclear medicine service of the Camaguey Ciego de Avila Territory

International Nuclear Information System (INIS)

Barrerras, C.A.; Brigido, F.O.; Naranjo, L.A.; Lasserra, S.O.; Hernandez Garcia, J.

1999-01-01

The nuclear medicine service at the Maria Curie Oncological Hospital, Camaguey, has experience of over three decades in using radiofarmaceutical imaging agents for diagnosis. Although the clinical risk associated with these techniques is negligible, it is necessary to evaluate the effective dose administered to the patient due to the introduction of radioactive substances into the body. The study of the dose administered to the patient provides useful data for evaluating the detriment associated with this medical practice, its subsequently optimization and consequently, for minimizing the stochastic effects on the patient. The aim of our paper is to study the collective effective dose administered by nuclear medicine service to Camaguey and Ciego de Avila population from 1995 to 1998 and the relative contribution to the total annual effective collective dose of the different diagnostic examinations. The studies were conducted on the basis of statistics from nuclear medicine examinations given to a population of 1102353 inhabitants since 1995. The results show that the nuclear medicine techniques of neck examinations with 1168.8 Sv man (1.11 Sv/expl), thyroid explorations with 119.6 Sv man (55.5 mSv/expl) and iodide uptake with 113.7 Sv man (14.0 mSv/expl) are the main techniques implicated in the relative contribution to the total annual effective collective dose of 1419.5 Sv man. The risk estimation in association with diagnostic techniques in the nuclear medicine service studied is globally low (total detriment: 103.6 as a result of 16232 explorations), similar to other published data

Use of nuclear techniques in food, agriculture and pest control

International Nuclear Information System (INIS)

Sigurbjoernsson, B.

1994-01-01

Nuclear techniques used in agriculture are of two distinct types but both based on the special characteristics of radio-isotopes which give off radiation or on isotopes which are heavier than the normal element. One type of application uses the radiation given off by isotopes to enable the detection of individual atoms in infinitely small amounts of matter. With this technique it is possible to follow the travels of fertilizer elements in the soil, into and throughout the crop plant or the travels of animal nutrient atoms throughout the animal and their deposition in milk and meat. This has resulted in enormous advances in crop and livestock research. The other type of application makes use of the unique ability of ionizing radiation x-rays, gamma-rays, electrons and neutrons to penetrate all types of matter and produce changes within living cells. These changes in cells induced by radiation can do three things: (1) can kill the cell; (2) render it incapable of reproducing itself (sterile); or (3) cause changes in its genetic make-up, called induced mutations. This paper contains a discussion of the applications of each technique

Nuclear techniques to address HAB concerns

International Nuclear Information System (INIS)

Vu Nhu Ngoc; Phan Son; Nguyen Ngoc Lam and Chu Van Thuoc

2004-01-01

In December, 1998, The Project Formulation meeting on application of Nuclear Techniques to address red tide (Harmful Algal Bloom concerns) was held in Manila Philippines. This is an IAEA/RCA project with the participation of Australia, China, Indonesia, Malaysia, Pakistan, The Philippines, Thailand and Vietnam. The main objectives of this project (RAS/8/076) included: - Conduct of segmentation studies to gain information on the natural histories of sediments and to correlated these with Red Tide occurrences. - Development of descriptive and predictive of the behaviour of Algal Bloom as affected by the interplay of the causative organism with the environment parameters in the water column and sediments. - Development and field testing of a rapid assay technique based on tritium - labeled saxitoxin for toxin determination. The first phase has been completed in 2002 and the second phase will be completed in 2004. In the two years of 2001 - 2002 Ted Tide occurred in very larger area in Vietnam, for example, in the coast of Binh Thuan Province with the density of 39.10 9 cells/litre. The Ministry of science - technology environment of Vietnam has support 5.000 USD each years for sediment and algal sampling in Cam Ranh Bay (Nha Trang, 11 o 45N and 10 o 15E) and Ha Long Bay in the North - East of Vietnam (21 o 15 and 107 o 3E) and in 2003 in Tuy Phong Bay (Binh Thuan province) (10 o 15N, 108 o 45E). Three sediment core has been taken from Cam Ranh Bay, Ha Long Bay and Tuy Phong Bay. The volume of sediment core is Φ = 8 cm and h = 60 cm. The algal samples have been collected by Bongo nets in Cam Ranh, Ha Long Bay and Tuy Phong Bay. (author)

Development of density and moisture gauge by nuclear techniques

International Nuclear Information System (INIS)

Mangelaviraj, V.; Karasuddhi, P.; Banchornthevakal, V.; Punyachaiya, S.

1981-08-01

A combined soil moisture/density gauge using nuclear technique was developed. Simultaneous density and moisture measurements can take place by means of gamma and neutron sources which are attached to the moisture probe. Backscattered gamma radiation giving information on density is detected by a G.M. counter while slow neutron radiation containing moisture information is detected by a boron-lined proportional counter. The instrument makes use of a 30 mCi americium 241-beryllium neutron source and a 10 mCi cesium 137 gamma source. The instrument was calibrated using soil and sand filled in a 200 litre-barrel in laboratory and field work which was carried out to check the correctness of the calibration curves. (author)

Nuclear techniques in plant pathology 1. Plant disease control and physiology of parasitism

International Nuclear Information System (INIS)

Menten, J.O.M.; Ando, A.; Tulmann Neto, A.

1986-01-01

Nuclear techniques are advantageously used in several areas of plant pathology. Among them are: induction of mutation for disease resistance, studies with pesticides, disease control through pathogen inactivation, induction of variability and stimulation in pathogens and natural enemies, studies of microorganism physiology and diseased plant physiology, effect of gamma radiation on pesticides, technology of pesticides application, etc. (Author) [pt

Alarm processing system using AI techniques for nuclear power plant

International Nuclear Information System (INIS)

Yang, Joon On; Chang, Soon Heung

1990-01-01

An alarm processing system (APS) has been developed using artificial intelligence (AI) techniques. The alarms of nuclear power plants (NPP's) are classified into the generalized and special alarms. The generalized alarms are also classified into the global and local alarms. For each type of alarms, the specific processing rules are applied to filter and suppress unnecessary and potentially misleading alarms. The local processing are based on 'model-based reasoning.' The global and special alarms are processed by using the general cause-consequence check rules. The priorities of alarms are determined according to the plant state and the consistencies between them

Use experiences of MCNP in nuclear energy study. 2. Review of variance reduction techniques

Energy Technology Data Exchange (ETDEWEB)

Sakurai, Kiyoshi; Yamamoto, Toshihiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; eds.

1998-03-01

`MCNP Use Experience` Working Group was established in 1996 under the Special Committee on Nuclear Code Evaluation. This year`s main activity of the working group has been focused on the review of variance reduction techniques of Monte Carlo calculations. This working group dealt with the variance reduction techniques of (1) neutron and gamma ray transport calculation of fusion reactor system, (2) concept design of nuclear transmutation system using accelerator, (3) JMTR core calculation, (4) calculation of prompt neutron decay constant, (5) neutron and gamma ray transport calculation for exposure evaluation, (6) neutron and gamma ray transport calculation of shielding system, etc. Furthermore, this working group started an activity to compile `Guideline of Monte Carlo Calculation` which will be a standard in the future. The appendices of this report include this `Guideline`, the use experience of MCNP 4B and examples of Monte Carlo calculations of high energy charged particles. The 11 papers are indexed individually. (J.P.N.)

Use experiences of MCNP in nuclear energy study. 2. Review of variance reduction techniques

International Nuclear Information System (INIS)

Sakurai, Kiyoshi; Yamamoto, Toshihiro

1998-03-01

''MCNP Use Experience'' Working Group was established in 1996 under the Special Committee on Nuclear Code Evaluation. This year''s main activity of the working group has been focused on the review of variance reduction techniques of Monte Carlo calculations. This working group dealt with the variance reduction techniques of (1) neutron and gamma ray transport calculation of fusion reactor system, (2) concept design of nuclear transmutation system using accelerator, (3) JMTR core calculation, (4) calculation of prompt neutron decay constant, (5) neutron and gamma ray transport calculation for exposure evaluation, (6) neutron and gamma ray transport calculation of shielding system, etc. Furthermore, this working group started an activity to compile ''Guideline of Monte Carlo Calculation'' which will be a standard in the future. The appendices of this report include this ''Guideline'', the use experience of MCNP 4B and examples of Monte Carlo calculations of high energy charged particles. The 11 papers are indexed individually. (J.P.N.)

Condition monitoring of a check valve for nuclear power plants by means of acoustic emission technique

International Nuclear Information System (INIS)

Lee, Min Rae; Leee, Jun Hyun; Kim, Jung Tack; Kim, Jung Soo; Luk, V. K.

2003-01-01

This work performed in support of the International Nuclear Energy Research Initiative(INERI) program, which was to develop and demonstrate advanced sensor and computational technology for on-line monitoring of the condition of components, structures, and systems in advanced and next-generation nuclear power plants (NPPs). The primary object of this work is to investigate advanced condition monitoring systems based on acoustic emission detection that can provide timely detection of check valve degradation and service aging so that maintenance/replacement could be preformed prior to loss of safety function. The research is focused on the capability of AE technique to provide diagnostic information useful in determining check valve aging and degradation, check valve failures and undesirable operating modes. This work also includes the investigation and adaptation of several advanced sensor technologies such as accelerometer and advanced ultrasonic technique. In addition, this work will develop advanced sophisticated signal processing, noise reduction, and pattern recognition techniques and algorithms from check valve degradation.

Condition monitoring of a check valve for nuclear power plants by means of acoustic emission technique

International Nuclear Information System (INIS)

Lee, M. R.; Lee, J. H.; Kim, J. T.; Kim, J. S.; Luk, V. K.

2003-01-01

This work performed in support of the International Nuclear Energy Research Institute (INERI) program, which was to develop and demonstrate advanced sensor and computational technology for on-line monitoring of the condition of components, structures, and systems in advanced and next-generation nuclear power plants (NPPs). This primary object of this work is to investigate advanced condition monitoring systems based on acoustic emission detection that can provide timely detection of check valve degeneration and service aging so that maintenance/replacement could be preformed prior to loss safety function. The research is focused on the capability of AE technique to provide diagnostic information useful in determining check valve aging and degradation check valve failure and undesirable operating modes. This work also includes the investigation and adaptation of several advanced sensor technologies such as accelerometer and advanced ultrasonic technique. In addition, this work will develop advanced sophisticated signal processing, noise reduction, and pattern recognition techniques and algorithms from check valve degradation.

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

International Nuclear Information System (INIS)

Schwantes, J.M.; Pellegrini, K.L.; Marsden, Oliva

2017-01-01

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques were applied to ITWG exercises for the first time. An objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided. (author)

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

International Nuclear Information System (INIS)

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

2016-01-01

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques were applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.

Use of nuclear and related analytical techniques in environmental research as exemplified by selected air pollution studies

International Nuclear Information System (INIS)

Smodis, B.; Jacimovic, R.; Jeran, Z.; Stropnik, B.; Svetina, M.

2000-01-01

Among nuclear and nuclear related analytical techniques, neutron activation analysis and X-ray fluorescence spectrometry proved to be particularly useful for environmental studies owing to their nondestructive character and multi element capability. This paper emphasizes their importance among other multielement analytical methods by discussing their specific role due to specific physics basis, quite different to other destructive non-nuclear methods, and by summarizing results obtained in several studies related to air pollution research, including analyses of airborne particulate matter, water samples, lichens and mosses. (author)

Characterisation and preservation of cultural heritage artefacts using nuclear techniques

International Nuclear Information System (INIS)

2011-01-01

This report covers the studies performed for the identification and preservation of cultural heritage using nuclear analytical techniques (NAT). Within the context of the project financed by the IAEA, cultural articles from various excavation regions and from the Anatolian Civilizations Museum were analyzed and identified using the instruments at our Center and information was provided regarding their manufacturing techniques, past restoration history and socioeconomic indicators about the period within which these articles were used. The analysis of the articles which could not be removed from the museum were performed in-situ using portable instruments and support was provided to the experts for some articles from excavation regions for the evaluation of their originality. Within the framework the of this Project, five experts attended to the workshops and meetings organised by the IAEA and in the context of scientific visits and bilateral cooperation, one expert from Greece and three experts from Macedonia visited our Center and Anatolian Civilizations Museum and experimental studies were performed together

Securing a better future for all: Nuclear techniques for global development and environmental protection. NA factsheet on nuclear sciences and applications: Applying 21st century nuclear science to 21st century problems

International Nuclear Information System (INIS)

2012-01-01

By enhancing the integration across various thematic areas, the IAEA plays a role in helping to address today's emerging challenges. In radiation medicine, for example, nuclear technology is used for the diagnosis and treatment of major non-communicable diseases such as cancer and cardiovascular disorders. The Human Health Campus at http://humanhealth.iaea.org provides on-line resources and learning for health professionals working in radiation medicine. Responding to the world cancer crisis, the IAEA developed a unique initiative, the Programme of Action for Cancer Therapy which works closely with the World Health Organization (WHO) through the WHO-IAEA Joint Programme on Cancer Control. The programme aims at providing assistance to Member States to adopt comprehensive national cancer control programmes that encompass early detection, prevention, cancer diagnosis and treatment and palliative care. In a joint division with the Food and Agriculture Organization of the United Nations, the IAEA assists Member States in applying nuclear techniques to alleviate challenges in food safety, food security and sustainable agricultural development. The IAEA has made significant contributions to helping developing countries adopt sterile insect techniques to suppress and eradicate insect pests that pose a threat to human and to animal health. Using scientific methods based on the tracing of isotopes, the IAEA is improving the management of the world's freshwater resources, a key aspect of sustainable development in the face of climate change. The IAEA also helps Member States monitor known sites of radioactive contamination, as manifested by their ongoing efforts in Japan after the incident at Fukushima. Radioisotope products and radiation technology are essential components for applications across all fields, be it medicine, industry, or agriculture. The demand for the most used radioisotopes has been steadily increasing, such as, for example, fission produced 99Mo and 99m

15 years in promoting the use of isotopic and nuclear technique for combating land degradation and soil erosion: the contribution of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture

Science.gov (United States)

Mabit, Lionel; Toloza, Arsenio; Heng, Lee

2017-04-01

Techniques in Food and Agriculture has developed research and development activities and capacity building to combat soil degradation (especially soil erosion) and to foster climate smart agriculture. More than 70 FAO/IAEA Member States have benefitted from the technical support and guidance in using fallout radionuclides (FRNs) and Compound-Specific Stable Isotope (CSSI) techniques to trace soil movement and assess soil erosion at different spatial and temporal scales, and to evaluate the effectiveness of soil conservation strategies to ensure sustainable land management. This contribution summarizes the historical background and the latest innovative activities conducted by the Joint FAO/IAEA Division, as well as the main advantages and complementarity of stable and radioisotopic tracers to conventional techniques when investigating land degradation. As examples of the significant role played by the Joint FAO/IAEA Division, two major outcomes achieved in Africa (i.e. Madagascar and Morocco) through the use of isotopic and nuclear techniques will be elaborated. The authors will also report on a new 5-year Co-ordinated Research Project (CRP) funded by the IAEA on "Nuclear Techniques for a Better Understanding of the Impact of Climate Change on Soil Erosion in Upland Agro-ecosystems" which involves key research institutions from 12 participating countries.

Models of signal validation using artificial intelligence techniques applied to a nuclear reactor

International Nuclear Information System (INIS)

Oliveira, Mauro V.; Schirru, Roberto

2000-01-01

This work presents two models of signal validation in which the analytical redundancy of the monitored signals from a nuclear plant is made by neural networks. In one model the analytical redundancy is made by only one neural network while in the other it is done by several neural networks, each one working in a specific part of the entire operation region of the plant. Four cluster techniques were tested to separate the entire operation region in several specific regions. An additional information of systems' reliability is supplied by a fuzzy inference system. The models were implemented in C language and tested with signals acquired from Angra I nuclear power plant, from its start to 100% of power. (author)

Application of nuclear techniques for analysis of Vietnamese coal and embedding rocks

International Nuclear Information System (INIS)

Vo Dac Bang; Pham Van Duong; Nguyen Thanh Binh; Le Tien Quan; Nguyen Manh Hung; Nguyen Thi Hong; Vu Hoang Lam

1995-01-01

In the paper the result of elemental analysis by Nuclear Techniques of Coal and Embedded rocks samples from Vietnamese Quang Ninh and Thai Nguyen basins were presented. Methods used were: Neutron activation Analysis at Dalat Reactor, low counting with HP-Ge and NaJ detectors and X-ray fluorescent analysis with planar Si (Si) detector. Mean concentrations of 19 elements in coal and 9 in rocks were determined. Correlation between concentrations of elements were found. It appears that the correlation between ash content and U, K, Th, concentrations was poor for Quang Ninh antracitecoal. Correlation coefficient was found to be 0,63 for ash range 0-40%. Content of Th in anthracite Quang Ninh coal was much higher than reported in literature for subbituminous, bituminous and lignite coals, while Thai Nguyen fat coal contains considerable amount of Cu, Pb, Zn. Obtained data were useful for evaluation of potential hazard for environment from using coal as fuel for coal fired power plants, for estimation of possibility of using nuclear technique in coal industry in Vietnam. They could be used also for geochemical investigations. The simple of-line coal ash gauge basing on attenuation of soft gamma radiation from Fe-55 was also described. (author). 6 refs, 3 figs, 8 tabs

Role of thermo-analytical techniques in compositional characterization of nuclear materials

International Nuclear Information System (INIS)

Raje, Naina

2015-01-01

The study of heat effects on different materials has a long history. Extraction of metals from the ores, pottery production, glasses making etc. are the examples, where the performance of products obtained from raw materials depends on the processing temperatures. Concrete, pottery, bricks etc., are severely damaged due to uncontrolled high temperatures. Therefore, the heating of raw materials in controlled manner is of pivotal importance to get products of the desired quality. Thermo-analytical techniques provide the information on the effect of heat under controlled heating conditions. In thermo-analytical techniques, physical properties of materials are measured as a function of temperature. Simultaneous thermo-analytical techniques are beneficial in comparison to any single thermo-analytical technique. Simultaneous techniques refer to the measurement of two or more signals on the same sample at the same time in the same instrument. Nowadays, simultaneous thermo-analytical technique are extensively in use for the analysis of materials. Ammonium diuranate (ADU) and magnesium diuranate (MDU), also known as yellowcake, are intermediate precursors in fuel fabrication process, with stringent specifications along with the need to understand its thermal behavior. In the processing of lowgrade ores, higher levels of impurities are being encountered in the leach solution that affects the properties of ADU/MDU. In order to meet the fuel specifications, quality assurance of these nuclear materials is essential. Current studies describe the application of simultaneous Thermogravimetry (TG) - differential thermal analysis (DTA) - evolved gas analysis (EGA) techniques for the compositional characterization of ADU/MDU with respect to the impurities present in the matrices

Development of nuclear-based techniques or the measurement, detection and control of environmental pollution

International Nuclear Information System (INIS)

1976-01-01

Rapid industrialization and urbanization have brought about drastic changes in the environment and often leave in their wake a host of new pollutants that may pose serious immediate or long-term health hazards. There is an urgent need to apply scientific knowledge to detect such harmful pollutants and to track their movement in the environment. The main purpose of the meeting was to identify the role of nuclear techniques in the solution of pollution problems. Topics covered included analysis of air particulates, activation analysis of water pollutants. X-ray fluorescence techniques, and tracer technology. In comparison to a similar symposium on the use of nuclear techniques for environment pollution studies held in October 1970, which dealt mostly with the use of neutron activation analysis and radioactive tracer techniques, the present meeting reflected the advances of X-ray fluorescence, electron-capture gas chromatography, and charged-particle induced analytical methods in trace analysis. A more selective approach in the choice of tracer techniques for investigating a particular pollution problem became apparent during the meeting. Since it is desirable to understand the origin and fate of the pollutants that pose immediate or long range influence on environmental quality, one common type of air pollution - that caused by the combustion of fossil fuels - was chosen to illustrate the state of the art. About 60% of the papers were related to the composition and movement of air pollutants from combustion processes. The influence of fuel-air mixing, combustion temperature and nitrogen content of fuel on the emission of noxious gases (nitrogen oxides, sulphur oxides, carbon monoxide and unburnt hydrocarbons) was reviewed. It was clear that pollution could be reduced at the expense of either paying additional costs for processing fossil fuel before it is burned, or by sacrificing energy efficiency by lowering the temperature in combustion zone. The analysis of air

Nuclear material safeguards surveillance and accountancy by isotope correlation techniques

International Nuclear Information System (INIS)

Persiani, P.J.; Goleb, J.A.; Kroc, T.K.

1981-11-01

The purpose of this study is to investigate the applicability of isotope correlation techniques (ICT) to the Light Water Reactor (LWR) and the Liquid Metal Fast Breeder Reactor (LMFBR) fuel cycles for nuclear material accountancy and safeguards surveillance. The isotopic measurement of the inventory input to the reprocessing phase of the fuel cycle is the primary direct determination that an anomaly may exist in the fuel management of nuclear material. The nuclear materials accountancy gap which exists between the fabrication plant output and the input to the reprocessing plant can be minimized by using ICT at the dissolver stage of the reprocessing plant. The ICT allows a level of verification of the fabricator's fuel content specifications, the irradiation history, the fuel and blanket assemblies management and scheduling within the reactor, and the subsequent spent fuel assembly flows to the reprocessing plant. The investigation indicates that there exist relationships between isotopic concentration which have predictable, functional behavior over a range of burnup. Several cross-correlations serve to establish the initial core assembly-averaged composition. The selection of the more effective functionals will depend not only on the level of reliability of ICT for verification, but also on the capability, accuracy and difficulty of developing measurement methods. The propagation of measurement errors on the correlation functions and respective sensitivities to isotopic compositional changes have been examined and found to be consistent with current measurement methods

Agricultural production - Phase 2. Indonesia. Rice - azolla - fish culture - use of nuclear technique

International Nuclear Information System (INIS)

Watanabe, Iwao.

1991-01-01

The primary aim of the expert mission was to provide advice on the use of nuclear techniques to study rice-azolla-fish culture. Results of the work performed so far show that basal application of azolla gives similar or better yields of rice than basal application of urea. Fish productivity was also found to be significantly higher when azolla is present. 2 tabs

IAEA regional training course use of nuclear techniques in health-related environmental research and monitoring : 28 April - 30 May 1986, Sydney/Darwin : proceedings

International Nuclear Information System (INIS)

Fardy, J.J.; Toner, B.

1987-01-01

The proceedings cover the use of nuclear techniques to show what measurements can be made in order to detect changes in environmental patterns. Nuclear techniques used for detecting and measuring a wide variety of pollutants which cause harmful effects on mankind and the environment are reported

Nuclear techniques in the study of East Coast fever (Theileria parva infection of cattle)

International Nuclear Information System (INIS)

Irvin, A.D.

1984-01-01

Nuclear techniques have been used in a variety of ways to study East Coast fever of cattle caused by the protozoan parasite Theileria parva. Macroschizonts, piroplasms and sporozoites have been radiolabelled by using different nucleic acid precursors, particularly 3 H-hypoxanthine and 3 H-thymidine. These studies have helped to elucidate cyclic changes occurring during parasite development in bovine lymphoid cells and in tick salivary glands. Attempts to attenuate parasites by irradiation have been partially successful in the case of sporozoites, and more attention should be given to an attempt to induce attenuation by irradiation of developing rather than mature sporozoites. Irradiation of macroschizont-infected cells does not appear to offer a means towards vaccine development but has proved a valuable technique in elucidating immunological mechanisms. The study of these mechanisms has also been greatly helped by nuclear techniques such as radioimmunoassay and 51 Cr-release assays. Irradiation of laboratory mice, particularly athymic nude strains, has resulted in immunosuppression of the host so that macroschizont-infected bovine lymphoid cells will grow as tumours following subcutaneous inoculation. Schizonts do not transfer to mouse cells and, until this can be achieved, the use of an athymic mouse model for East Coast fever is limited. (author)

Nuclear techniques for determining biomass production, evaporation and transpiration, root development and nutritional value

International Nuclear Information System (INIS)

Niemann, E.G.; Kuehn, W.; Kaul, A.K.

1975-01-01

From the Institute of Radiation Botany, Hanover, some nuclear methods are presented which could be of assistance to the plant breeders in selecting for positive plant characters. Several methods have been developed for the continuous determination of biomass by means of gamma-absorption measurements in single plants as well as in experimental field plots. The response of plant growth to environmental conditions such as fertilization, irrigation, and day length, dependent on genetic parameters can easily be followed by these techniques. Primarily for the investigation of water vapour movement in soils and between soil and atmosphere under conditions of temperature inversions, a technique has been worked out using 3 H-labelled water and water vapour. The inclusion of plants in this system will allow the determination of water balance under varying environmental conditions. An autoradiographic method has been applied using 86 Rb as trace element mainly for the measurement of root distribution of trees (apple, coffee). Finally, a sequence of analytical steps are described that have been developed and used in Hanover for the selection for protein amount and quality in crop plants. Though not all of these steps include nuclear methods, the application of tracer techniques in this and other screening sequences is an invaluable help for breeders and analysts. (author)

Progress in nuclear measuring and experimental techniques by application of microelectronics. 1

International Nuclear Information System (INIS)

Meiling, W.

1984-01-01

In the past decade considerable progress has been made in nuclear measuring and experimental techniques by developing position-sensitive detector systems and widely using integrated circuits and microcomputers for data acquisition and processing as well as for automation of measuring processes. In this report which will be published in three parts those developments are reviewed and demonstrated on selected examples. After briefly characterizing microelectronics, the use of microelectronic elements for radiation detectors is reviewed. (author)

Biomonitoring of air pollution in Jamaica through trace-element analysis of epiphytic plants using nuclear and related analytical techniques

International Nuclear Information System (INIS)

Vutchkov, Mitko

2001-01-01

The main goal of the Coordinated Research Project (No:9937/R0), entitled 'Biomonitoring of Air Pollution in Jamaica Through Trace-Element Analysis of Epiphytic Plants Using Nuclear and Related Analytical Techniques', is to identify and validate site specific epiphytic plants for biomonitoring the atmospheric pollution in Jamaica using nuclear analytical techniques at the International Centre for Environmental and Nuclear Sciences (ICENS). The specific objectives for the second year of the project were: Development of HOP for sampling epiphytic plants in Jamaica; Sampling design and sample collection; Sample preparation and analysis; Development of an in-house SRM and participation in the NAT-5 inter-laboratory study; Data analysis and interpretation of the results; Development of a work plan of the third year of the project

Economics of long distance transmission, storage and distribution of heat from nuclear plants with existing and newer techniques

International Nuclear Information System (INIS)

Margen, Peter

1977-01-01

Nuclear plants can provide heat for district heating in mainly two ways. Central nuclear power plants sufficiently large to be economic as electricity producers could instead be designed for heat extraction at temperatures useful for district heating. The second promising way is to design simple low temperature reactors, so simple and safe that near urban location becomes feasible. The manner of transport distribution and storage of heat is discussed in this paper which are very important especially in the cost calculations. The economic objectives can often be attained already with conventional technigues even when transport distances are large. But newer techniques of transport promise to make even cities at greater distances from major nuclear power plants economically connectible whilst new techniques for small distribution pipes help to extend the economic distribution area to the less dense one-family house districts. (M.S.)

Atomic and Nuclear Analytical Methods XRF, Mössbauer, XPS, NAA and Ion-Beam Spectroscopic Techniques

CERN Document Server

Verma, H R

2007-01-01

This book is a blend of analytical methods based on the phenomenon of atomic and nuclear physics. It comprises comprehensive presentations about X-ray Fluorescence (XRF), Mössbauer Spectroscopy (MS), X-ray Photoelectron Spectroscopy (XPS), Neutron- Activation Analysis (NAA), Particle Induced X-ray Emission Analysis (PIXE), Rutherford Backscattering Analysis (RBS), Elastic Recoil Detection (ERD), Nuclear Reaction Analysis (NRA), Particle Induced Gamma-ray Emission Analysis (PIGE), and Accelerator Mass Spectrometry (AMS). These techniques are commonly applied in the fields of medicine, biology, environmental studies, archaeology or geology et al. and pursued in major international research laboratories.

Approximate calculational techniques for radiation protection applications (collection of papers presented at the November 1985 American Nuclear Society meeting)

Energy Technology Data Exchange (ETDEWEB)

Rice, A.F.; Roussin, R.W. (comps.)

1986-09-01

Although radiation protection principles are, on the whole, well understood and a whole series of computer codes exist for their solution, it is felt that there is a need for practical, approximate techniques to be used by the practicing nuclear engineer for a variety of applications. Within the context of approximate techniques, the papers presented cover a broad overview of specific problems, for example, skyshine and penetration analysis, with applications extending from general nuclear reactor design to spent fuel storage and fusion. Separate abstracts have been prepared for individual papers.

Modern techniques for the analysis of chromatin and nuclear organization in C. elegans.

Science.gov (United States)

Askjaer, Peter; Ercan, Sevinç; Meister, Peter

2014-04-02

In recent years, Caenorhabditis elegans has emerged as a new model to investigate the relationships between nuclear architecture, cellular differentiation, and organismal development. On one hand, C. elegans with its fixed lineage and transparent body is a great model organism to observe gene functions in vivo in specific cell types using microscopy. On the other hand, two different techniques have been applied in nematodes to identify binding sites for chromatin-associated proteins genome-wide: chromatin immunoprecipitation (ChIP), and Dam-mediated identification (DamID). We summarize here all three techniques together as they are complementary. We also highlight strengths and differences of the individual approaches.

The role of nuclear techniques in the long-term prediction of radionuclide transport

International Nuclear Information System (INIS)

Airey, P.L.; Duerden, P.

1985-01-01

Problems associated with the long-term prediction of the migration of radionuclides, and the role of natural analogues in reducing the inherent uncertainties are discussed. Particular reference is made to the evaluation of uranium ore bodies in the Alligator Rivers region, Northern Territory, as analogues of high-level radioactive waste repositories. A range of nuclear techniques has been used to identify the role of colloids, of alpha recoil and of mineralogy in transport. Specific mention is made of a method being developed which enables models of the migration of solute through fractured rock to be assessed via a combination of alpha track, fission track and PIXE/PIGME techniques

Dose-reduction techniques for high-dose worker groups in nuclear power plants

International Nuclear Information System (INIS)

Khan, T.A.; Baum, J.W.; Dionne, B.J.

1991-03-01

This report summarizes the main findings of a study of the extent of radiation dose received by special work groups in the nuclear power industry. Work groups which chronically get large doses were investigated, using information provided by the industry. The tasks that give high doses to these work groups were examined and techniques described that were found to be particularly successful in reducing dose. Quantitative information on the extent of radiation doses to various work groups shows that significant numbers of workers in several critical groups receive doses greater than 1 and even 2 rem per year, particularly contract personnel and workers at BWR-type plants. The number of radiation workers whose lifetime dose is greater than their age is much less. Although the techniques presented would go some way in reducing dose, it is likely that a sizeable reduction to the high-dose work groups may require development of new dose-reduction techniques as well as major changes in procedures. 10 refs., 26 tabs

Advanced Surveillance, Diagnostic and Prognostic Techniques in Monitoring Structures, Systems and Components in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-09-15

direction of research, development and demonstration in this area. The technologies discussed in this project are intended to establish the state of the art in surveillance, diagnostics and prognostics (SDP) technologies for equipment and process health monitoring in nuclear facilities. It is also intended to identify technology gaps and research needs of the nuclear industry in the area of SDP. The report draws on the conventional SDP technologies, as well as the latest tools, algorithms and techniques that have emerged over the last few years, especially in enabling technologies including fast data acquisition, data storage, data qualification and data analysis algorithms, such as empirical and physical modelling techniques. These new tools have made it possible to identify problems earlier and with better resolution. The significance of the material presented in this report is that it contributes not only to the current needs of the nuclear industry but also to the design improvements of the next generation of reactors. For example, the nuclear industry is currently striving to operate the plants for up to 80 years or more, as the value of nuclear assets has risen in recent years, resulting partly from environmental concerns with fossil energy production, as well as increased future demand for base load electricity. This long term operation (LTO) or life extension goal of the nuclear industry has stimulated renewed interest in more frequent monitoring of equipment to guard against ageing effects, not to mention the economic benefits that SDP implementation can produce, and contributions to radiation exposure that is as low as reasonably achievable, reduction of human errors, and optimized maintenance. Together with capabilities that enhance situational awareness, the technologies described in this report will enable more holistic management of plant structures, systems and components (SSCs), maintain high capacity factor in LTO and enable higher levels of safe operation

Advanced Surveillance, Diagnostic and Prognostic Techniques in Monitoring Structures, Systems and Components in Nuclear Power Plants

International Nuclear Information System (INIS)

2013-01-01

direction of research, development and demonstration in this area. The technologies discussed in this project are intended to establish the state of the art in surveillance, diagnostics and prognostics (SDP) technologies for equipment and process health monitoring in nuclear facilities. It is also intended to identify technology gaps and research needs of the nuclear industry in the area of SDP. The report draws on the conventional SDP technologies, as well as the latest tools, algorithms and techniques that have emerged over the last few years, especially in enabling technologies including fast data acquisition, data storage, data qualification and data analysis algorithms, such as empirical and physical modelling techniques. These new tools have made it possible to identify problems earlier and with better resolution. The significance of the material presented in this report is that it contributes not only to the current needs of the nuclear industry but also to the design improvements of the next generation of reactors. For example, the nuclear industry is currently striving to operate the plants for up to 80 years or more, as the value of nuclear assets has risen in recent years, resulting partly from environmental concerns with fossil energy production, as well as increased future demand for base load electricity. This long term operation (LTO) or life extension goal of the nuclear industry has stimulated renewed interest in more frequent monitoring of equipment to guard against ageing effects, not to mention the economic benefits that SDP implementation can produce, and contributions to radiation exposure that is as low as reasonably achievable, reduction of human errors, and optimized maintenance. Together with capabilities that enhance situational awareness, the technologies described in this report will enable more holistic management of plant structures, systems and components (SSCs), maintain high capacity factor in LTO and enable higher levels of safe operation

Non-destructive electrochemical techniques applied to the corrosion evaluation of the liner structures in nuclear power plants

International Nuclear Information System (INIS)

Martinez, I.; Castillo, A.; Andrade, C.

2008-01-01

The liner structure in nuclear power plants provides containment for the operation and therefore the study of its durability and integrity during its service life is an important issue. There are several causes for the deterioration of the liner, which in general involve corrosion due to its metallic nature. The present paper is aimed at describing the assessment of corrosion problems of two liners from two different nuclear power plants, which were evaluated using non-destructive electrochemical techniques. In spite of the testing difficulties arisen, from the results extracted it can be concluded that the electrochemical techniques applied are adequate for the corrosion evaluation. They provide important information about the integrity of the structure and allow for its evolution with time to be assessed

Prompt nuclear analytical techniques for material research in accelerator driven transmutation technologies: Prospects and quantitative analyses

International Nuclear Information System (INIS)

Vacik, J.; Hnatowicz, V.; Cervena, J.; Perina, V.; Mach, R.

1998-01-01

Accelerator driven transmutation technology (ADTT) is a promising way toward liquidation of spent nuclear fuel, nuclear wastes and weapon grade Pu. The ADTT facility comprises a high current (proton) accelerator supplying a sub-critical reactor assembly with spallation neutrons. The reactor part is supposed to be cooled by molten fluorides or metals which serve, at the same time, as a carrier of nuclear fuel. Assumed high working temperature (400-600 C) and high radiation load in the subcritical reactor and spallation neutron source put forward the problem of optimal choice of ADTT construction materials, especially from the point of their radiation and corrosion resistance when in contact with liquid working media. The use of prompt nuclear analytical techniques in ADTT related material research is considered and examples of preliminary analytical results obtained using neutron depth profiling method are shown for illustration. (orig.)

Co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes

International Nuclear Information System (INIS)

1988-01-01

A co-ordinated research programme on the use of nuclear and nuclear-related techniques in the study of environmental pollution associated with solid wastes was started by the Agency in December 1987 and now comprises nineteen participants from seventeen countries. Topics of interest in this programme include studies of atmospheric aerosols, coal fly ash, incinerator ash, sewage sludge and a variety of other environmental specimens contaminated with solid wastes. The analytical techniques being used in this programme include neutron activation analysis (NAA), particle induced X-ray emission (PIXE) and energy-dispersive X-ray fluorescence (ED-XRF). This report summarizes the discussions that took place during the first research co-ordination meeting. Working papers presented by the participants are included as annexes. The main outcome of the meeting was agreement to include a ''core'' programme comprising studies of (1) aerosols collected from areas of low and high pollution, (2) coal fly ash composition, and (3) leaching of toxic elements from coal fly ash

Applications of nuclear analytical techniques to environmental studies

International Nuclear Information System (INIS)

Freitas, M.C.; Marques, A.P.; Reis, M.A.; Pacheco, A.M.G.; Barros, L.I.C.

2001-01-01

A few examples of application of nuclear-analytical techniques to biological monitors - natives and transplants - are given herein. Parmelia sulcata Taylor transplants were set up in a heavily industrialized area of Portugal - the Setubal peninsula, about 50 km south of Lisbon - where indigenous lichens are rare. The whole area was 10x15 km around an oil-fired power station, and a 2.5x2.5 km grid was used. In north-western Portugal, native thalli of the same epiphytes (Parmelia spp., mostly Parmelia sulcata Taylor) and bark from olive trees (Olea europaea) were sampled across an area of 50x50 km, using a 10x10 km grid. This area is densely populated and features a blend of rural, urban-industrial and coastal environments, together with the country's second-largest metro area (Porto). All biomonitors have been analyzed by INAA and PIXE. Results were put through nonparametric tests and factor analysis for trend significance and emission sources, respectively

Applied nuclear γ-resonance as fingerprint technique in geochemistry and mineralogy

International Nuclear Information System (INIS)

Constantinescu, S.

2003-01-01

The aim of the present paper is to evidence the new developments of one of the most refined technique, the nuclear γ resonance or the well-known Moessbauer effect, in the field of mineralogical and geo-chemical investigation. There are many Moessbauer studies on minerals, but the development, the new performance of the Moessbauer equipment and of the computers impose to review more profoundly and more thoroughly the information, which this non-destructive technique offers. This task became more and more pressingly because a lot of minerals contain in high proportion, the Moessbauer isotopes. Generally, the mineralogists, physicists and chemists hope to obtain more refined and complete information about the physics and chemistry synthesis aspects in solid state transformation of some natural and synthetic materials and also about the structural aspects, by these kind of techniques. On this line, the authors very shortly review the principal aspects of the Moessbauer spectroscopy and underline the most important information one can obtain from spectra. The recent results, which have been obtained on minerals extracted from Romanian geological deposits by the authors, will be discussed in detail in the second part of this article. (authors)

Laboratory training manual on the use of nuclear techniques in pesticide research

International Nuclear Information System (INIS)

1983-01-01

This is a laboratory training manual on the use of nuclear techniques, and in particular radioisotopes in pesticide research. It is designed to give the scientists involved in pesticide research the basic terms and principles for understanding ionizing radiation: detection and measurement its hazards and safety measures, and some of the more common applications. Laboratory exercises representing the types of experiments that are valuable in pesticide research programmes and field tests which demonstrate the use of radiolabelled pesticides are included

Sorption and chromatographic techniques for processing liquid waste of nuclear fuel cycle

International Nuclear Information System (INIS)

Gelis, V.M.; Milyutin, V.V.; Chuveleva, E.A.; Maslova, G.B.; Kudryavtseva, S.P.; Firsova, L.A.; Kozlitin, E.A.

2000-01-01

In the spent nuclear fuel processing procedures the significant quantity of high level liquid waste containing long-lived high toxic radionuclides of cesium, strontium, promethium, americium, curium, etc. is generated. Separation of those radionuclides from the waste not merely simplifies the further safe waste handling but also reduces the waste processing operation costs due to the market value of certain individual radionuclide preparations. Recovery and separation of high grade pure long-lived radionuclide preparations is frequently performed by means of chromatographic techniques. (authors)

Identification of a particular cheese production by trace analysis with nuclear techniques

Science.gov (United States)

Salvini, A.; Stroppa, A.; Cagnazzo, M.; Pappalardo, P.; Borio, A.; Manera, S.

2006-05-01

The counterfeit of a product, in this case a type of cheese, is an economic damage for the trade-mark product. An identification of the product itself by quantification of trace elements could be done. Nuclear techniques are useful and give good results. Some elements are connected to the process so different productions could be identified. Thirty elements and 160 spectrums are analysed. The samples of the same kind of cheese come from different countries and different Italian producers (15 different productions).

Identification of a particular cheese production by trace analysis with nuclear techniques

International Nuclear Information System (INIS)

Salvini, A; Stroppa, A; Cagnazzo, M; Pappalardo, P; Borio, A; Manera, S

2006-01-01

The counterfeit of a product, in this case a type of cheese, is an economic damage for the trade-mark product. An identification of the product itself by quantification of trace elements could be done. Nuclear techniques are useful and give good results. Some elements are connected to the process so different productions could be identified. Thirty elements and 160 spectrums are analysed. The samples of the same kind of cheese come from different countries and different Italian producers (15 different productions)

Fault diagnosis in nuclear power plants using an artificial neural network technique

International Nuclear Information System (INIS)

Chou, H.P.; Prock, J.; Bonfert, J.P.

1993-01-01

Application of artificial intelligence (AI) computational techniques, such as expert systems, fuzzy logic, and neural networks in diverse areas has taken place extensively. In the nuclear industry, the intended goal for these AI techniques is to improve power plant operational safety and reliability. As a computerized operator support tool, the artificial neural network (ANN) approach is an emerging technology that currently attracts a large amount of interest. The ability of ANNs to extract the input/output relation of a complicated process and the superior execution speed of a trained ANN motivated this study. The goal was to develop neural networks for sensor and process faults diagnosis with the potential of implementing as a component of a real-time operator support system LYDIA, early sensor and process fault detection and diagnosis

Evaluation of serpentine ore as a nuclear shielding material using gas chromatographic techniques

International Nuclear Information System (INIS)

Singh, B.N.; Unnikrishnan, E.K.; Kumar, Sangita D.

2007-01-01

Serpentine ore mixed with cement has been recognized as a candidate shielding material for use in nuclear reactors because of its many desirable properties. Therefore the assessment of serpentine ore for release of volatile gases during exposure to elevated temperatures, irradiation and changes in chemical composition, is essential. The present paper deals with the studies on the serpentine ores using gas chromatography and combustion gas chromatographic techniques. (author)

Mechanics and electronics as auxiliary techniques in nuclear research and exploitation; Mecanique et electronique auxiliaires de la recherche et de l'exploitation nucleaire

Energy Technology Data Exchange (ETDEWEB)

Weill, J. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre d' Etudes nucleaires de Saclay, Departement Electronique, Groupe Controle des Reacteurs (France)

1959-07-01

Electronics and mechanics form the basic techniques used in the field of measurement and control in nuclear physics experiments, and in nuclear machine installations. The delegate describes some instruments typical of the use of these techniques in the fields of calculation, detection, amplification and nuclear Installations. Reprint of a paper published in 'Bulletin S.F.M.' n. 25 (3. quarter 1957) [French] L'electronique et la mecanique constituent les techniques de base utilisees clans le domaine des mesures et du controle effectues dans les experiences de physique nucleaire et dans les installations des engins nucleaires. Le Conferencier decrit plusieurs appareils caracteristiques de l'emploi de ces techniques dans les domaines du calcul, des detecteurs, de l'amplification et des lnstallations nucleaires. Reproduction d'un article publie dans le 'Bulletin S.F.M.' n. 25 (3e trimestre 1957)

Construction of an experimental simplified model for determining of flow parameters in chemical reactors, using nuclear techniques

International Nuclear Information System (INIS)

Araujo Paiva, J.A. de.

1981-03-01

The development of a simplified experimental model for investigation of nuclear techniques to determine the solid phase parameters in gas-solid flows is presented. A method for the measurement of the solid phase residence time inside a chemical reactor of the type utilised in the cracking process of catalytic fluids is described. An appropriate radioactive labelling technique of the solid phase and the construction of an eletronic timing circuit were the principal stages in the definition of measurement technique. (Author) [pt

Speciation, in the nuclear fuel cycle by spectroscopic techniques

International Nuclear Information System (INIS)

Colette, S.; Plancque, G.; Allain, F.; Lamouroux, C.; Steiner, V.; Amekraz, B.; Moulin, C.

2000-01-01

New analytical techniques allowing to perform speciation in the framework of the nuclear fuel cycle are more and more needed. They have to be selective (since matrix encountered are very complex), sensitive (in order to work at representative concentration and below solubility limit), as well as non intrusive (in order to keep the image of the real solution). Among them, laser-based analytical techniques present these advantages together with the possibility to perform remote measurements via fiber optics. Hence, Time-Resolved Laser-Induced Fluorescence (TRLIF) has been used for actinides/lanthanides interaction and speciation studies in inorganic and organic matrices from the reprocessing to waste storage. Moreover, new ion detection methods such as Electro-Spray - Mass Spectrometry (ES-MS) seems promising for speciation studies. Hence, it is the first time that it is possible to directly couple a liquid at atmospheric pressure to a mass detection working at reduced pressure with a soft mode of ionisation that should allow to give informations on chemical species present. Principle, advantages and limitations as well as results obtained with the use of TRLIF and ES-MS on different systems of interest including actinides, lanthanides, fission products in interaction with simple organic molecules to very complex structure will be presented and discussed. (authors)

Speciation, in the nuclear fuel cycle by spectroscopic techniques

Energy Technology Data Exchange (ETDEWEB)

Colette, S.; Plancque, G.; Allain, F.; Lamouroux, C.; Steiner, V.; Amekraz, B.; Moulin, C. [CEA/Saclay, Dept, des Procedes d' Enrichissement (DPE), 91 - Gif-sur-Yvette (France)

2000-07-01

New analytical techniques allowing to perform speciation in the framework of the nuclear fuel cycle are more and more needed. They have to be selective (since matrix encountered are very complex), sensitive (in order to work at representative concentration and below solubility limit), as well as non intrusive (in order to keep the image of the real solution). Among them, laser-based analytical techniques present these advantages together with the possibility to perform remote measurements via fiber optics. Hence, Time-Resolved Laser-Induced Fluorescence (TRLIF) has been used for actinides/lanthanides interaction and speciation studies in inorganic and organic matrices from the reprocessing to waste storage. Moreover, new ion detection methods such as Electro-Spray - Mass Spectrometry (ES-MS) seems promising for speciation studies. Hence, it is the first time that it is possible to directly couple a liquid at atmospheric pressure to a mass detection working at reduced pressure with a soft mode of ionisation that should allow to give informations on chemical species present. Principle, advantages and limitations as well as results obtained with the use of TRLIF and ES-MS on different systems of interest including actinides, lanthanides, fission products in interaction with simple organic molecules to very complex structure will be presented and discussed. (authors)

Plasma filtering techniques for nuclear waste remediation.

Science.gov (United States)

Gueroult, Renaud; Hobbs, David T; Fisch, Nathaniel J

2015-10-30

Nuclear waste cleanup is challenged by the handling of feed stocks that are both unknown and complex. Plasma filtering, operating on dissociated elements, offers advantages over chemical methods in processing such wastes. The costs incurred by plasma mass filtering for nuclear waste pretreatment, before ultimate disposal, are similar to those for chemical pretreatment. However, significant savings might be achieved in minimizing the waste mass. This advantage may be realized over a large range of chemical waste compositions, thereby addressing the heterogeneity of legacy nuclear waste. Copyright © 2015 Elsevier B.V. All rights reserved.

Nuclear and related techniques for improving productivity of indigenous animals in harsh environments

International Nuclear Information System (INIS)

1986-01-01

The seminar provided a forum to review the various ways by which nuclear and related methods can be used to improve animal nutrition, reproduction and disease control under the different ecological conditions prevailing in Africa and the Middle East. The seminar was held concurrently with an FAO/IAEA Advisory Group Meeting. The purpose of this meeting was for invited scientists from various disciplines to evaluate those nuclear and related techniques currently used to quantify such functions as animal adaptation, digestion and utilization of poor quality feedstuffs, reproductive efficiency and resistance to disease and other forms of stress. This volume contains a selection of the papers presented during the seminar as well as the Recommendations of the Advisory Group Meeting. Separate abstracts were prepared for 15 papers of this volume

Archaeometry: nuclear and conventional techniques applied to the archaeological research

International Nuclear Information System (INIS)

Esparza L, R.; Cardenas G, E.

2005-01-01

The book that now is presented is formed by twelve articles that approach from different perspective topics as the archaeological prospecting, the analysis of the pre hispanic and colonial ceramic, the obsidian and the mural painting, besides dating and questions about the data ordaining. Following the chronological order in which the exploration techniques and laboratory studies are required, there are presented in the first place the texts about the systematic and detailed study of the archaeological sites, later we pass to relative topics to the application of diverse nuclear techniques as PIXE, RBS, XRD, NAA, SEM, Moessbauer spectroscopy and other conventional techniques. The multidisciplinary is an aspect that highlights in this work, that which owes to the great specialization of the work that is presented even in the archaeological studies including in the open ground of the topography, mapping, excavation and, of course, in the laboratory tests. Most of the articles are the result of several years of investigation and it has been consigned in the responsibility of each article. The texts here gathered emphasize the technical aspects of each investigation, the modern compute systems applied to the prospecting and the archaeological mapping, the chemical and physical analysis of organic materials, of metal artifacts, of diverse rocks used in the pre hispanic epoch, of mural and ceramic paintings, characteristics that justly underline the potential of the collective works. (Author)

Basalt identification by interpreting nuclear and electrical well logging measurements using fuzzy technique (case study from southern Syria)

International Nuclear Information System (INIS)

Asfahani, J.; Abdul Ghani, B.; Ahmad, Z.

2015-01-01

Fuzzy analysis technique is proposed in this research for interpreting the combination of nuclear and electrical well logging data, which include natural gamma ray, density and neutron-porosity, while the electrical well logging include long and short normal. The main objective of this work is to describe, characterize and establish the lithology of the large extended basaltic areas in southern Syria. Kodana well logging measurements have been used and interpreted for testing and applying the proposed technique. The established lithological cross section shows the distribution and the identification of four kinds of basalt, which are hard massive basalt, hard basalt, pyroclastic basalt and the alteration basalt products, clay. The fuzzy analysis technique is successfully applied on the Kodana well logging data, and can be therefore utilized as a powerful tool for interpreting huge well logging data with higher number of variables required for lithological estimations. - Highlights: • Apply fuzzy analysis technique on the nuclear and electrical well logging data of Kodana well in Southern Syria. • Determine and differentiate between four kinds of basalt. • Establish the lithological section of the studied well.

Dictionary of nuclear sciences and techniques

International Nuclear Information System (INIS)

Bigot, B.; Santarini, G.

2008-01-01

This reference book has been totally reworked in its fourth edition, in order to answer the needs of the numerous sectors of activity concerned by nuclear sciences and technologies: radiation protection, cancerology, neurology and pharmacology in the medical sector, power generation and more generally energy production, micro-electronics, quality control and on-line analysis in many industrial sectors, patrimony preservation, food safety, environmental and paleo-climate studies in relation with climate prospective, etc. This complete overview of the nuclear world integrates the regulatory aspects, necessary to shade light on it, and many other technological innovations. Elaborated with harmonization, clarification and exhaustiveness concerns, this dictionary is the result of a large consensus among the French-speaking nuclear community. It includes some 4800 entries with more than 250 color illustrations and an English-French glossary. Its aim is to offer to everyone a precise vocabulary, fully shared by everybody and necessary for exchanges and debates clarity. (J.S.)

Technique for detecting a small magnitude loss of special nuclear material

International Nuclear Information System (INIS)

Pike, D.H.; Chernick, M.R.; Downing, D.J.

The detection of losses of special nuclear materials has been the subject of much research in recent years. The standard industry practice using ID/LEID will detect large magnitude losses. Time series techniques such as the Kalman Filter or CUSUM methods will detect small magnitude losses if they occur regularly over a sustained period of time. To date no technique has been proposed which adequately addresses the problem of detecting a small magnitude loss occurring in a single period. This paper proposes a method for detecting a small magnitude loss. The approach makes use of the influence function of Hempel. The influence function measures the effect of a single inventory difference on a group of statistics. An inventory difference for a period in which a loss occurs can be expected to produce an abnormality in the calculated statistics. This abnormality is measurable by the influence function. It is shown that a one period loss smaller in magnitude than the LEID can be detected using this approach

Rapid nuclear forensics analysis via laser based microphotonic techniques coupled with chemometrics

International Nuclear Information System (INIS)

Bhatta, B.; Kalambuka, H.A.; Dehayem-Kamadjeu, A.

2017-01-01

Nuclear forensics (NF) is an important tool for analysis and attribution of nuclear and radiological materials (NRM) in support of nuclear security. The critical challenge in NF currently is the lack of suitable microanalytical methodologies for direct, rapid and minimally-invasive detection and quantification of NF signatures. Microphotonic techniques can achieve this task particularly when the materials are of limited size and under concealed condition. The purpose of this paper is to demonstrate the combined potential of chemometrics enabled LIBS and laser Raman spectromicroscopy (LRS) for rapid NF analysis and attribution. Using LIBS, uranium lines at 385.464 nm, 385.957 nm and 386.592 nm were identified as NF signatures in uranium ore surrogates. A multivariate calibration strategy using artificial neural network was developed for quantification of trace uranium. Principal component analysis (PCA) of LIBS spectra achieved source attribution of the ores. LRS studies on UCl3, UO3(NO3)2.6H2O, UO2SO4.3H2O and UO3 in pellet state identified the bands associated with different uranium molecules as varying in the range of (840 to 867) ± 15 cm-1. Using this signature, we have demonstrated spectral imaging of uranium under concealed conditions (author)

Performance values of nondestructive analysis techniques in safeguards and nuclear materials management

International Nuclear Information System (INIS)

Guardini, S.

1989-01-01

Nondestructive assay (NDA) techniques have, in the past few years, become more and more important in nuclear material accountancy and control. This is essentially due to two reasons: (1) The improvements made in most NDA techniques led some of them to have performances close to destructive analysis (DA) (e.g., calorimetry and gamma spectrometry). (2) The parallel improvement of statistical tools and procedural inspection approaches led to abandoning the following scheme: (a) NDA for semiqualitative or consistency checks only (b) DA for quantitative measurements. As a consequence, NDA is now frequently used in scenarios that involve quantitative (by variable) analysis. On the other hand, it also became evident that the performances of some techniques were different depending on whether they were applied in the laboratory or in the field. It has only recently been realized that, generally speaking, this is due to objective reasons rather than to an incorrect application of the instruments. Speaking of claimed and actual status of NDA performances might be in this sense misleading; one should rather say: performances in different conditions. This paper provides support for this assumption

Determination of trace uranium in human hair by nuclear track detection technique

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; En, Zinaida; Cho, Seung Yeon; Kang, Sang Hoon; Lee, Jae Ki

2001-01-01

The aim of this study is to describe a usefulness of nuclear analytical technique in assessing and comparing the concentration levels through the analysis of uranium using human hair sample in the field of environment. A fission track detection technique was applied to determine the uranium concentration in human hair. Hair samples were collected from two groups of people - a) workers not dealing with uranium directly, and b) workers possibly contaminated with uranium. The concentration of 235 U for the first group varied from <1 to 39 ng/g and the second group can be estimated up to the level of μg/g. Radiographs of heavy-duty work samples contained high dense 'hot spots' along a single hair. After washing in acetone and distilled water, external contamination was not totally removed. Insoluble uranium compounds were not completely washed out. The (n, f)-radiography technique, having high sensitivity, and capable of getting information on uranium content at each point of a single hair, is an excellent tool for environmental monitoring

Survey of technology for decommissioning of nuclear fuel cycle facilities. 8. Remote handling and cutting techniques

Energy Technology Data Exchange (ETDEWEB)

Ogawa, Ryuichiro; Ishijima, Noboru [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

1999-03-01

In nuclear fuel cycle facility decommissioning and refurbishment, the remote handling techniques such as dismantling, waste handling and decontamination are needed to reduce personnel radiation exposure. The survey research for the status of R and D activities on remote handling tools suitable for nuclear facilities in the world and domestic existing commercial cutting tools applicable to decommissioning of the facilities was conducted. In addition, the drive mechanism, sensing element and control system applicable to the remote handling devices were also surveyed. This report presents brief surveyed summaries. (H. Itami)

Ultrasonic recording and display techniques for the inspection of nuclear power plant

International Nuclear Information System (INIS)

Ely, R.W.; Hall, G.D.; Johnson, A.; Pascoe, P.T.

1985-01-01

This paper describes four systems: MDU, PURDIE, LAURA and DRUID, under development as ultrasonic recording and display techniques for the inspection of nuclear power plant. The MDU system plots either plan or sectional views of the component under test onto a bistable storage screen. PURDIE is a system based around a video cassette recorder which has been modified to record ultrasonic A-scan waveforms and probe positional information. MDU and PURDIE are portable systems, for use under difficult site conditions. They may be manufactured in quantity to satisfy the demanding inspection programmes of nuclear power stations. LAURA is a desk top replay system for the video cassette tapes produced on site by PURDIE. DRUID is a digital desk top replay/display system incorporating a high resolution colour graphics terminal and therefore offering more flexibility and improved display formats. The systems are compatible with each other and some component units are directly interchangeable between the various systems

Nuclear safeguards: power tool for ensuring nuclear safety and security

International Nuclear Information System (INIS)

Ramakumar, K.L.

2016-01-01

The quantitative measurement of fissile nuclear materials through independent measurements is one of the cornerstones of the Nuclear Material Accounting and Control (NUMAC) edifice. The verification of the accountancy also represents one of the key elements of international nuclear materials Safeguards. The very basis of NUMAC is to ensure safeguarding nuclear material and to state with confidence, “no significant amount of nuclear material has been withdrawn from its intended civilian use.” Thus, materials accounting systems are designed to account for or keep track of the amounts and locations of sensitive nuclear materials by periodic measurements. The purpose of this activity is to detect missing items (gross defects). A variety of C/S techniques are used, primarily optical surveillance and sealing. These measures serve to back up nuclear material accountancy by providing means by which access to nuclear material can be monitored. Unattended monitoring is a special mode of application of NDA or C/S techniques, or a combination of these, that operates for extended periods of time. The complexity and diversity of facilities containing safeguarded nuclear material require a correspondingly diverse set of verification techniques and equipment. The equipment and techniques used in safeguards are briefly described in this talk

Advanced ultrasonic techniques for nondestructive testing of austenitic and dissimilar welds in nuclear facilities

Science.gov (United States)

Juengert, Anne; Dugan, Sandra; Homann, Tobias; Mitzscherling, Steffen; Prager, Jens; Pudovikov, Sergey; Schwender, Thomas

2018-04-01

Austenitic stainless steel welds as well as dissimilar metal welds with nickel alloy filler material, used in safety relevant parts of nuclear power plants, still challenge the ultrasonic inspection. The weld material forms large oriented grains that lead, on the one hand, to high sound scattering and, on the other hand, to inhomogeneity and to the acoustic anisotropy of the weld structure. The ultrasonic wave fronts do not propagate linearly, as in ferritic weld joints, but along the curves, which depend on the specific grain structure of the weld. Due to the influence of these phenomena, it is difficult to analyze the inspection results and to classify the ultrasonic indications, which could be both from the weld geometry and from the material defects. A correct flaw sizing is not possible. In an ongoing research project, different techniques to improve the reliability of ultrasonic testing at these kinds of welds are investigated. In a first step (in the previous research project) two ultrasonic inspection techniques were developed and validated on plane test specimens with artificial and realistic flaws. In the ongoing project, these techniques are applied to circumferential pipe welds with longitudinal and transverse flaws. The technique developed at the Federal Institute for Materials Research and Testing (BAM) in Germany uses a combination of ray tracing and synthetic aperture focusing technique (SAFT). To investigate the unknown grain structure, the velocity distribution of weld-transmitting ultrasound waves is measured and used to model the weld by ray tracing. The second technique, developed at the Fraunhofer Institute for Nondestructive Testing (IZFP) in Germany, uses Sampling Phased Array (Full Matrix Capture) combined with the reverse phase matching (RPM) and the gradient elastic constant descent algorithm (GECDM). This inspection method is able to estimate the elastic constants of the columnar grains in the weld and offers an improvement of the

Characterization of Old Nuclear Waste Packages Coupling Photon Activation Analysis and Complementary Non-Destructive Techniques

International Nuclear Information System (INIS)

Carrel, Frederick; Coulon, Romain; Laine, Frederic; Normand, Stephane; Sari, Adrien; Charbonnier, Bruno; Salmon, Corine

2013-06-01

Radiological characterization of nuclear waste packages is an industrial issue in order to select the best mode of storage. The characterization becomes crucial particularly for waste packages produced at the beginning of the French nuclear industry. For the latter, available information is often incomplete and some key parameters are sometimes missing (content of the package, alpha-activity, fissile mass...) In this case, the use of non-destructive methods, both passive and active, is an appropriate solution to characterize nuclear waste packages and to obtain all the information of interest. In this article, we present the results of a complete characterization carried out on the TE 1060 block, which is a nuclear waste package produced during the 1960's in Saclay. This characterization is part of the DEMSAC (Dismantling of Saclay's facilities) project (ICPE part). It has been carried out in the SAPHIR facility, located in Saclay and housing a linear electron accelerator. This work enables to show the great interest of active methods (photon activation analysis and high-energy imaging) as soon as passive techniques encounter severe limitations. (authors)

Assessment of Effective Prestressed Force of Nuclear Containment Building using SI Technique

Energy Technology Data Exchange (ETDEWEB)

Lee, H. P.; Jang, J. B.; Hwang, K. M.; Song, Y. C. [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

2010-10-15

Bonded tendons have been used in reactor buildings of heavy water reactors and the light water reactors of some nuclear power plants operating in Korea. The assessment of prestressed forces on those bonded tendons is becoming an important issue in assuring their continuous operation beyond their design life. In order to assess the effective prestressed force on the bonded tendon, indirect assessment techniques have been applying to the test beams which were manufactured on construction time. Therefore, this research mainly forced to establish the assessment methodology to measure directly the effective prestressed force on the bonded tendon of containment buildings using System Identification (SI) technique. To accomplish this purpose, simple SI method was proposed and adapted three dimensional finite element analysis of the 1:4 scale prestressed concrete containment vessel (PCCV) tested by Sandia National Laboratory in 2000

Application of Radiation Protection on the use of Nuclear Techniques in Madagascar : Case of the INSTN, the CHUA-HJRA and the society COLAS Madagascar

International Nuclear Information System (INIS)

RASOANANDRASANA, P.V.

2012-01-01

The use of the nuclear techniques can cause an exposure to ionizing radiations of the population and can cause harmful effects to human's health and the environment. Radiation protection is the means to protect workers, the public and the environment against the dangers of ionizing radiations. This work emphasizes improving the teaching of Nuclear Physics. In the first part, we recalled the generalities about nuclear physics and the peaceful use of nuclear techniques in medical, industrial and research. The second part was devoted to the art of protection against ionizing radiations. We studied in the third part the practical application of radiation protection in three institutions using radioactive sources and X-ray device. We have audited the protection techniques in the Secondary Calibration Laboratory for Dosimetry of Madagascar-INSTN, at the CHUA-HJRA Hospital and at the society COLAS Madagascar. These institutions are implementing these techniques to ensure the health of the workers, patients and the public. This work shows that the radiation protection has an important place in hospitals and industries that use radiation sources and devices emitting ionizing radiation. [fr

Plasma processing techniques for deposition of carbonic thin protective coatings on structural nuclear materials

International Nuclear Information System (INIS)

Andrei, V.; Oncioiu, G.; Coaca, E.; Rusu, O.; Lungu, C.

2009-01-01

Full text of publication follows: The production of nano-structured surface films with controlled properties is crucial for the development of materials necessary for the Advanced Systems for Nuclear Energy. Since the surface of materials is the zone through which materials interact with the environment, the surface science and surface engineering techniques plays an essential role in the understanding and control of the processes involved. Complex surface structures were developed on stainless steels used as structural nuclear materials: austenitic stainless steels based on Fe, austenitic steels with high content of Cr, ferrites resistant to corrosion, by various Plasma Processing methods which include: - Plasma Electrolytic (PE) treatments: the steel substrates were modified by nitriding and nitro-carburizing plasma diffusion treatments; - carbonic films deposition in Thermionic Vacuum Arc Plasma. The results of the characterization of surface structures obtained in various experimental conditions for improvement of the properties (corrosion resistance, hardness, wear properties) are reported: the processes and structures were characterized by correlation of the results of the complementary techniques: XPS, 'depth profiling', SEM, XRD, EIS. An overall description of the processes involved in the surface properties improvement, and some consideration about the new materials development for energy technologies are presented

Assessment of suspected infection of hip or knee endoprosthesis by nuclear medicine techniques

International Nuclear Information System (INIS)

Schmidt, M.; Dietlein, M.; Schicha, H.; Delank, K.S.

2007-01-01

Complications after hip endoprosthesis operation occur with a frequency of 1-2 % after primary operation and with 3-5 % after revision arthroplasty and are even more frequent after knee arthroplasty. The differentiation between aseptic loosening and bacterial infection is very important. In aseptic loosening a one-step revision is usually possible. In case of bacterial infection, all foreign material has to be removed first to allow cure from the infection. After healing and absence of bacteria a follow-up operation is possible with insertion of a new prosthesis. Diagnosis and therapy of a painful hip or knee endoprosthesis are difficult, because patient history, clinical examination, laboratory results including microbiological investigation of puncture material and results of radiological examinations may all be inconclusive. Quite a number of nuclear medicine procedures have been published in the past to help in the differentiation between aseptic loosening and bacterial infection of a painful hip or knee endoprosthesis. No single method can be regarded as excellent and without disadvantages. In the international literature the combined leucocyte-marrow imaging has been propageted as superior technique. In Germany, combined leucocyte-marrow imaging is not available in the published form. Moreover, this technique is time consuming, cost intensive and requires direct work with blood. Therefore, infection imaging with labelled antibodies or labelled fragments of antibodies may be regarded as the method of choice for most nuclear medicine physicians. With semiquantitative evaluation a comparative diagnostic accuracy may be achieved. 18 F-FDG-PET is not able to differentiate reliably between abacterial polyethylene abrasion and septic inflammation. However, with pattern recognition of the distribution of 18 F-FDG around a hip prosthesis an approach with clinically acceptable results has been published. A normal 18 F-FDG-PET can reliably exclude an infection