WorldWideScience

Sample records for nuclear byproducts naf

  1. Reuse of nuclear byproducts, NaF and HF in metal glass industries

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.W.; Lee, H.W. [Korea Power Engineering Co., Inc., Kyunggi-do (Korea, Republic of); Yoo, S.H.; Moon, H.S.; Cho, N.C. [Korea Nuclear Fuel Co., Ltd., Daejon (Korea, Republic of)

    1997-02-01

    A study has been performed to evaluate the radiological safety and feasibility associated with reuse of NaF(Sodium Fluoride) and HF(Hydrofluoric Acid) which are generated as byproducts from the nuclear fuel fabrication process. The investigation of oversea`s experience reveals that the byproduct materials are most often used in the metal and glass industries. For the radiological safety evaluation, the uranium radioactivities in the byproduct materials were examined and shown to be less than radioactivities in natural materials. The radiation doses to plant personnel and the general public were assessed to be very small and could be ignored. The Korea nuclear regulatory body permits the reuse of NaF in the metal industry on the basis of associated radioactivity being {open_quote}below regulatory concern{close_quote}. HF is now under review for reuse acceptability in the steel and glass industries.

  2. Pelletizing of NaF granules as adsorbent for fluorides of nuclear fuel materials, (1)

    International Nuclear Information System (INIS)

    Kimura, Syojiro; Tsutsui, Tenson; Kanagawa, Akira.

    1976-01-01

    The pelletizing of NaF granules on laboratory scale used for recovery and purification of fluorides of nuclear fuel materials are investigated, particularity experimental studies on how to pelletize, fluidity of granules and flow rate of the granules in mortar of tablet machine are carried out. As result, added quantity of H 2 O as binder at granulation process of spherical NaF granule influence to yield of NaF granules. The proper quantity of H 2 O to NaF powder is about 18--19%. Friction coefficient of unfixed shape NaF granule is higher than that of spherical granule, in opposition, density of the former granule is lower. So fluidity of unfixed shape NaF granule is low, flow rate of the granules through feeder of tablet machine is slow, and arching on mortar of the tablet machine occurs. Then, some further operation for getting better fluidity needs for pelletizing of NaF granules using unfixed shape granule. The other hand, using spherical NaF granule, continuous pelletizing by commercial tablet machine can be carried out. (auth.)

  3. Pelletizing of NaF granules as adsorbent for fluorides of nuclear fuel materials, (2)

    International Nuclear Information System (INIS)

    Kimura, Syojiro; Tsutsui, Tenson; Kanagawa, Akira.

    1976-01-01

    Experimental studies on compressibility of NaF granules are investigated. Brittleness and porosity of a tableted pellet depend on compressive power applied to the granules. Relation of the compressive power and distortion of NaF granules agree with Kawakita's formula. About the brittleness of NaF pellet tableted with optional pressure, the follow experimental formula is formed between axial destructive power and compressive power. Dsub(p)=f.psup(n) Then, relation of the axial destructive power and porosity of NaF pellet is given from the above mentioned experimental formula and Kawakita's formula. At the lower value of the porosity than 0.4, the axial destructive power varies steeply as compared with variation of the porosity. At optional porosity, the brittleness of the tableted NaF pellet are lower than Harshow Chem. Co. NaF.HF pellet. So it requires some process raising the brittleness of the pellet after the compression. (auth.)

  4. 10 CFR 30.12 - Persons using byproduct material under certain Department of Energy and Nuclear Regulatory...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Persons using byproduct material under certain Department of Energy and Nuclear Regulatory Commission contracts. 30.12 Section 30.12 Energy NUCLEAR REGULATORY... Persons using byproduct material under certain Department of Energy and Nuclear Regulatory Commission...

  5. Advice on the disposal of radioactive by-products arising in the use of nuclear energy

    International Nuclear Information System (INIS)

    Beyermann, M.; Goergner, D.

    1989-01-01

    Based on the current legislation in the GDR advice is given on the classification and disposal of radioactive by-products from the utilization of nuclear energy with special emphasis on the different procedures for products which require a disposal licence by the National Board for Atomic Safety and Radiation Protection and those which do not need such an authorization. (author)

  6. Department of Energy plan for recovery and utilization of nuclear byproducts from defense wastes. Volume 2

    International Nuclear Information System (INIS)

    1983-08-01

    Nuclear wastes from the defense production cycle contain many uniquely useful, intrinsically valuable, and strategically important materials. These materials have a wide range of known and potential applications in food technology, agriculture, energy, public health, medicine, industrial technology, and national security. Furthermore, their removal from the nuclear waste stream can facilitate waste management and yield economic, safety, and environmental advantages in the management and disposal of the residual nuclear wastes that have no redemptive value. This document is the program plan for implementing the recovery and beneficial use of these valuable materials. An Executive Summary of this document, DOE/DP-0013, Vol. 1, January 1983, is available. Program policy, goals and strategy are stated in Section 2. Implementation tasks, schedule and funding are detailed in Section 3. The remaining five sections and the appendixes provide necessary background information to support these two sections. Section 4 reviews some of the unique properties of the individual byproduct materials and describes both demonstrated and potential applications. The amounts of byproduct materials that are available now for research and demonstration purposes, and the amounts that could be recovered in the future for expanded applications are detailed in Section 5. Section 6 describes the effects byproduct recovery and utilization have on the management and final disposal of nuclear wastes. The institutional issues that affect the recovery, processing and utilization of nuclear byproducts are discussed in Section 7. Finally, Section 8 presents a generalized mathematical process by which applications can be evaluated and prioritized (rank-ordered) to provide planning data for program management

  7. Department of Energy plan for recovery and utilization of nuclear byproducts from defense wastes. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-01

    Nuclear wastes from the defense production cycle contain many uniquely useful, intrinsically valuable, and strategically important materials. These materials have a wide range of known and potential applications in food technology, agriculture, energy, public health, medicine, industrial technology, and national security. Furthermore, their removal from the nuclear waste stream can facilitate waste management and yield economic, safety, and environmental advantages in the management and disposal of the residual nuclear wastes that have no redemptive value. This document is the program plan for implementing the recovery and beneficial use of these valuable materials. An Executive Summary of this document, DOE/DP-0013, Vol. 1, January 1983, is available. Program policy, goals and strategy are stated in Section 2. Implementation tasks, schedule and funding are detailed in Section 3. The remaining five sections and the appendixes provide necessary background information to support these two sections. Section 4 reviews some of the unique properties of the individual byproduct materials and describes both demonstrated and potential applications. The amounts of byproduct materials that are available now for research and demonstration purposes, and the amounts that could be recovered in the future for expanded applications are detailed in Section 5. Section 6 describes the effects byproduct recovery and utilization have on the management and final disposal of nuclear wastes. The institutional issues that affect the recovery, processing and utilization of nuclear byproducts are discussed in Section 7. Finally, Section 8 presents a generalized mathematical process by which applications can be evaluated and prioritized (rank-ordered) to provide planning data for program management.

  8. Department of Energy plan for recovery and utilization of nuclear byproducts from defense wastes. Volume 1. Executive summary

    International Nuclear Information System (INIS)

    1983-08-01

    Nuclear byproducts are a major national resource that has yet to be incorporated into the economy. The current Defense Byproducts Program is designed to match specific military and commercial needs with the availability of valuable products which are currently treated as waste at considerable expense in waste management costs. This program plan focuses on a few specific areas with the greatest potential for near-term development and application. It also recognizes the need for a continuing effort to develop new applications for byproducts and to continue to assess the impacts on waste management. The entire program has been, and will continue to be structured so as to ensure the safety of the public and maintain the purity of the environment. Social and institutional concerns have been recognized and will be handled appropriately. A significant effort will be undertaken to inform the public of the benefits of byproduct use and of the care being taken to ensure safe, efficient operation

  9. Department of Energy plan for recovery and utilization of nuclear byproducts from defense wastes. Volume 1. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-08-01

    Nuclear byproducts are a major national resource that has yet to be incorporated into the economy. The current Defense Byproducts Program is designed to match specific military and commercial needs with the availability of valuable products which are currently treated as waste at considerable expense in waste management costs. This program plan focuses on a few specific areas with the greatest potential for near-term development and application. It also recognizes the need for a continuing effort to develop new applications for byproducts and to continue to assess the impacts on waste management. The entire program has been, and will continue to be structured so as to ensure the safety of the public and maintain the purity of the environment. Social and institutional concerns have been recognized and will be handled appropriately. A significant effort will be undertaken to inform the public of the benefits of byproduct use and of the care being taken to ensure safe, efficient operation.

  10. The NAF: National analysis facility at DESY

    International Nuclear Information System (INIS)

    Haupt, Andreas; Kemp, Yves

    2010-01-01

    Within the framework of a broad collaboration among German particle physicists, the strategic Helmholtz Alliance P hysics a the Terascale , an analysis facility has been set up at DESY. The facility is intended to provide the best possible analysis infrastructure for researches of the ATLAS, CMS, LHCb and ILC experiments and also for theory researchers. In a first part of the contribution, we will present the concept of the NAF and its place in the existing distributed grid landscape of the experiments. In a second part, the building blocks of the NAF will be detailed with an emphasis on technical implementations of some parts: - Usage of VOMS for separating grid resources between collaboration-wide and NAF-specific resources. - interactive and batch cluster and integration with PROOF. - usage of grid proxies to access work group servers and AFS. - the usage and operation of Lustre for fast data access. A special focus is the seamless integration of the facility into the two geographically separated DESY sites and its implications. In a third part, the experience of running the facility for one year will be reported.

  11. Evolution of Interactive Analysis Facilities: from NAF to NAF 2.0

    International Nuclear Information System (INIS)

    Haupt, Andreas; Kemp, Yves; Nowak, Friederike

    2014-01-01

    In 2007, the National Analysis Facility (NAF) was set up within the framework of the Helmholtz Alliance 'Physics at the Terascale', and is located at DESY. Its purpose was and is the provision of an analysis infrastructure for up-to-date research in Germany, complementing the Grid by offering a interactive access to the data. It has been well received within the physics community, and has proven to be a highly successful concept. We will review experiences with the original NAF, and discuss both the resulting motivation and constraints for the transition to an evolved model. We call this new facility the NAF 2.0. We will present a new setup including its building blocks and user handling, and give an overview of the current status. The integration of new communities has broadened the range of the analysis facility beyond its primary focus on LHC and ILC experiments. To finish, an outlook on further developments like the adoption of new technologies will be given.

  12. Technology for recovery of byproducts

    International Nuclear Information System (INIS)

    Van Tuyl, H.H.

    1983-02-01

    In this paper, a byproduct is considered to be any product from a nuclear fuel reprocessing plant other than the principal products of uranium and plutonium. Those which have been recovered on a large scale include: 237 Np, 90 Sr, 137 Cs, 85 Kr, 147 Pm, 241 Am, 244 Cm, and 144 Ce. Other byproducts which have been recovered in small amounts during development efforts are: Tc, Ru, Rh, Pd, and Xe. This paper reviews the byproducts of interest, compares and contrasts byproduct recovery with waste management, describes current and past byproduct recovery operations, development status of alternative processes, and bases for selection among alternative processes in developing an integrated byproduct recovery plant

  13. Fluorine-18 NaF PET imaging of child abuse

    Energy Technology Data Exchange (ETDEWEB)

    Drubach, Laura A. [Children' s Hospital Boston and Harvard Medical School, Department of Radiology, Division of Nuclear Medicine/PET, Boston, MA (United States); Sapp, Mark.V. [School of Osteopathic Medicine, Child Abuse Research Education and Services (CARES) Institute University of Medicine and Dentistry of New Jersey, New Jersey (United States); Laffin, Stephen [Children' s Hospital Boston, Department of Radiology, Division of Nuclear Medicine/PET, Boston, MA (United States); Kleinman, Paul K. [Children' s Hospital Boston and Harvard Medical School, Department of Radiology, Division of Musculoskeletal Imaging, Boston, MA (United States)

    2008-07-15

    We describe the use of {sup 18}F-NaF positron emission tomography (PET) whole-body imaging for the evaluation of skeletal trauma in a case of suspected child abuse. To our knowledge, 18F NaF PET has not been used in the past for the evaluation of child abuse. In our patient, this technique detected all sites of trauma shown by initial and follow-up skeletal surveys, including bilateral metaphyseal fractures of the proximal humeri. Fluorine-18 NaF PET has potential advantage over Tc-99m-labeled methylene diphosphonate (MDP) based upon superior image contrast and spatial resolution. (orig.)

  14. Fluorine-18 NaF PET imaging of child abuse

    International Nuclear Information System (INIS)

    Drubach, Laura A.; Sapp, Mark V.; Laffin, Stephen; Kleinman, Paul K.

    2008-01-01

    We describe the use of 18 F-NaF positron emission tomography (PET) whole-body imaging for the evaluation of skeletal trauma in a case of suspected child abuse. To our knowledge, 18F NaF PET has not been used in the past for the evaluation of child abuse. In our patient, this technique detected all sites of trauma shown by initial and follow-up skeletal surveys, including bilateral metaphyseal fractures of the proximal humeri. Fluorine-18 NaF PET has potential advantage over Tc-99m-labeled methylene diphosphonate (MDP) based upon superior image contrast and spatial resolution. (orig.)

  15. ONE YEAR'S EXPERIENCE IN REGULATING BYPRODUCT, SOURCE, AND SPECIAL NUCLEAR MATERIAL IN THE COMMONWEALTH OF KENTUCKY

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, C L

    1963-06-15

    On March 26, 1962, Kentucky assumed regulatory control for the licensing of subcritical nuclear materials within its boundaries. The administration of the state radiological health program is described, and the manpower, fiscal, and equipment requirements are outlined. The licensing activity of the state is also described. Results are reported of preliminary studies of state-owned land for low-level radioactive waste disposal. The procedures for inspection of licensees are described. Proposed changes in the Radiological Health regulations of Kentucky in order to bring about compatibility with AEC's code of Federal Regulations are outlined. (D.L.C.)

  16. Experimental study on the shrinkage properties and cracking potential of high strength concrete containing industrial by-products for nuclear power plant concrete

    International Nuclear Information System (INIS)

    KIm, Baek Joong; Yi, Chong Ku

    2017-01-01

    In Korea, attempts have been made to develop high strength concrete for the safety and design life improvement of nuclear power plants. In this study, the cracking potentials of nuclear power plant-high strength concretes (NPP-HSCs) containing industrial by-products with W/B 0.34 and W/B 0.28, which are being reviewed for their application in the construction of containment structures, were evaluated through autogenous shrinkage, unrestrained drying shrinkage, and restrained drying shrinkage experiments. The cracking potentials of the NPP-HSCs with W/B 0.34 and W/B 0.28 were in the order of 0.34FA25 > 0.34FA25BFS25 > 0.34BFS50 > 0.34BFS65SF5 and 0.28FA25SF5 >> 0.28BFS65SF5 > 0.28BFS45SF5 > 0.28 FA20BFS25SF5, respectively. The cracking potentials of the seven mix proportions excluding 0.28FA25SF5 were lower than that of the existing nuclear power plant concrete; thus, the durability of a nuclear power plant against shrinkage cracking could be improved by applying the seven mix proportions with low cracking potentials

  17. Experimental study on the shrinkage properties and cracking potential of high strength concrete containing industrial by-products for nuclear power plant concrete

    Energy Technology Data Exchange (ETDEWEB)

    KIm, Baek Joong; Yi, Chong Ku [School of Civil, Environmental and Architectural Engineering, Korea University, Seoul (Korea, Republic of)

    2017-02-15

    In Korea, attempts have been made to develop high strength concrete for the safety and design life improvement of nuclear power plants. In this study, the cracking potentials of nuclear power plant-high strength concretes (NPP-HSCs) containing industrial by-products with W/B 0.34 and W/B 0.28, which are being reviewed for their application in the construction of containment structures, were evaluated through autogenous shrinkage, unrestrained drying shrinkage, and restrained drying shrinkage experiments. The cracking potentials of the NPP-HSCs with W/B 0.34 and W/B 0.28 were in the order of 0.34FA25 > 0.34FA25BFS25 > 0.34BFS50 > 0.34BFS65SF5 and 0.28FA25SF5 >> 0.28BFS65SF5 > 0.28BFS45SF5 > 0.28 FA20BFS25SF5, respectively. The cracking potentials of the seven mix proportions excluding 0.28FA25SF5 were lower than that of the existing nuclear power plant concrete; thus, the durability of a nuclear power plant against shrinkage cracking could be improved by applying the seven mix proportions with low cracking potentials.

  18. Influence of different naf concentration on the mechanical and morphological properties on sintered β-TCP

    International Nuclear Information System (INIS)

    Saito, L.; Cardoso, H.A.I.; Zavaglia, C.A.C.; Motisuke, M.

    2011-01-01

    Among the bioceramics, [beta]-tricalcium phosphate, β-TCP, is currently used in biomedical applications due to its in vivo reabsorption and chemical composition, important for bone formation and repair. Researchers showed that the addition of sodium fluoride (NaF) up to 2wt.% increases β-TCP mechanical properties without altering its biocompatibility and bioactivity. In this work, the effect of different NaF concentrations (2wt.% to 5wt.%) on β-TCP properties was studied. The samples were sintered at 1250 deg C during four hours. Afterwards, it were determined its mechanical resistance, density, morphology and chemical composition as a function of NaF content. The results showed that the presence of NaF does not lead to an increase on the mechanical properties. This fact is probably related to the formation of a mixture of TCP, apatite and sodium and calcium phosphates; and a visible increase on samples' density.(author)

  19. Pengaruh variasi berat polimer terhadap sifat fisik Patch NaF

    Directory of Open Access Journals (Sweden)

    Diyah Fatmasari

    2018-04-01

    Full Text Available Influence of weight polymer variation towards sodium fluoride patch physical properties. Fluoride has been proven as a material for strengthen teeth. Many fluoride modalities are available nowadays, and the recent is sodium fluoride (NaF patch which delivers fluoride via transdermal. No report was found about the physical properties of NaF patch based on polymer variation used. Research purpose was to find NaF patch with polymer variation which has good physical properties. Research design was quasy experimental with post test group research as research approach. Dependent variables included polymer variation and stored time; independent variable included patch thickness; resistance of folding; weight; drug content; percentage of moisture uptake and percentage loss on drying. NaF Patch manufacturing used solvent casting method the polymer PVA and PVP mixed in 2 ml aquabidest inwater bath until polymer dissolved; 100 mg of NaF mixed in 2 ml aquabi 0,1 ml oleic acid; 0,1 ml IPA mixed in glass tube and dissolved in 3,8 ml aquabidest. Three kinds of NaF patch with polymer variation were made. All materials were mixed in glass tube and stirred until dissolved, then pour into petry disc and allowed for 3 days until it dry. Research result showed a difference of physical properties among three NaF patch. Patch with variation PVP : PVA = 1 : 2 resulted in the best physical properties. Storing patch in aluminum foil did not cause any differences of physical properties. NaF patch with good polymer variation can be developed for further research.   ABSTRAK Fluorida sudah terbukti sebagai bahan untuk memperkuat permukaan gigi. Berbagai sediaan fluoride sudah banyak ditemukan. Sediaan fluoride yang terbaru adalah dalam bentuk plester yang melepaskan ion fluorida lewat kulit. Sediaan plester sodium fluorida (NaF sudah ditemukan tetapi belum ada lapran mengenai sifat fisik plester berdasarkan variasi polimer yang digunakan. Tujuan penelitian adalah untuk

  20. Influence of activating solution and the addition of NaF on metakaolin-based geopolymer physico-chemical properties

    International Nuclear Information System (INIS)

    Agullo, J.; Muzeau, B.; Trepy, N.; L'Hostis, V.; Lambertin, D.

    2015-01-01

    The technology of geo-polymerisation is attracting a lot of interest due to the wide variety of potential applications. Recently emerging and alternative cementitious systems based on geo-polymers have been reported in literature. Geo-polymer materials have been proposed as new binders for safe radioactive waste containment. Moreover, their good fluidity and fire resistance make them compatible with industrial processes for embedding wastes. The purpose of this work was to investigate the physico-chemical properties of meta-kaolin-based geo-polymer which could be used as mineral binder for encapsulation of metallic nuclear wastes. To improve the knowledge of this binder, its microstructure and its interstitial solution have been characterized during hydration (up to 28 days). Interstitial solutions were extracted at different hydration time and subsequent analyses allow us to determine their chemical composition. pH measurements confirm the high alkalinity of the interstitial pore solution. The influence of the activating solution (NaOH or KOH) and the addition of NaF as corrosion inhibitor in the geo-polymer composition were also studied. The nature of different crystalline phases was identified by X-ray diffraction. Water accessible porosity for these materials was estimated around 59%. The pore size distribution was determined by mercury intrusion porosity. Alkaline cations have proved to induce changes in the pore size distribution, these ones coming from whether the activating solution or the NaF addition. (authors)

  1. Quatenary Na//F, Cl, CO3, MoO4 system

    International Nuclear Information System (INIS)

    Kochkarov, Zh.A.; Lok''yaeva, S.M.; Shurdumov, G.K.; Gasanaliev, A.M.; Trunin, A.S.

    1999-01-01

    Perspective in applied respect quatenary system (NaF) 2 -(NaCl)-Na 2 CO 3 -Na 2 MoO 4 being element of narrowing of more complex six-membered mutual Na//F, Cl, CO 3 , MoO 4 (WO 4 ) system is investigated by differential thermal analysis with the use of projection-thermographic method for the first time. Crystallization tree of Na//F, Cl, CO 3 , MoO 4 system is established. It is shown that this system by tetrahedrating (NaF) 2 -Na 2 CO 3 -Na 3 ClMoO 4 section is triangulated on two stable system: (NaF) 2 -Na 3 ClMoO 4 -Na 2 CO 3 -(NaCl) 2 and (NaF) 2 -Na 3 ClMoO 4 -Na 2 CO 3 -Na 2 MoO 4 . Phase single units are determined too. Coordinates of desired quatenary nonvariant points are calculated on analytical models of surfaces by mutual crystallization of two phases and are refined by differential thermal analysis [ru

  2. Chlorine by-products in sea water at the Penly nuclear power plant. Measurement survey in May 1993

    International Nuclear Information System (INIS)

    Khalanski, M.; Delesmont, R.

    1994-09-01

    The objective of the measurement survey conducted at the Penly nuclear power plant on May 27 and 28, 1993, was to determine the distribution of residual oxidants and volatile organo-halogenated compounds (THM) concentrations in the discharge plume when both units of the plants are carrying out chlorination. The data collected provide a mapping of the chemical types analyzed and will serve in calibration of a numerical model to simulate the evolution of these compounds in the discharge plume. During the two days of measurements, quantitative analyses were performed on samples taken by helicopter, once at high tide and twice at low tide with mean tidal coefficients. The chlorine injection level ranged from 0.84 to 0.92 mg/l (ppm) in unit 1 and from 0.64 to 0.70 mg/l in unit 2. Residual oxidants were measured as Total Chlorine equivalents using the colorimetric DPD method. Bromoform accounted for 97.8 % of the THM generated by chlorination. Three minutes after injection of hypochlorite, in the discharge basin, bromoform reached 60 % of its maximum concentration (29.23 μg/l). The maximum reaction yield of bromoform formation is 2,9 %. Three zones were defined according to their proximity to releases. In each zone, given the lake of precision in measurements, the concentration of residual oxidants found did not reach significant levels (≤0.03 mg/l). The bromoform concentration, on the contrary, reached measurable levels in each of the samples. Its distribution differs significantly from one zone to another: -release zone : 1.66±0.40μg/l -nearby zone: 0.44±0.13μg/l - distant zone : 0.26±0.10μg/l. Our analysis, which indicates a background level of the order of 0.1 μg/l for the entire studied area, raises the question of possible other sources of bromoform, independent of discharge from Penly. (authors). 15 refs., 11 figs., 5 tabs., 4 annexes

  3. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Ashlines: To promote and support the commercially viable and environmentally sound recycling of coal combustion byproducts for productive uses through scientific research, development, and field testing.

  4. NaF18-PET/CT imaging of second hyperparathyroidism

    Energy Technology Data Exchange (ETDEWEB)

    Win, Aung Zaw; Aparici, Carina Mari [San Francisco VA Medical Center, San Franciso (United States)

    2015-12-15

    The patient was a 59-year-old man with a history of hypertension and end-stage renal disease for 14 years. An NaF-18 positron emission tomography/CT bone scan was ordered to rule out osteosarcoma or other possible bone malignancies. A lesion representing a brown tumor was observed on the left femoral shaft. The incidence of ESRD is about 400 cases per million in the United States and it has risen fastest in older individuals. This is the second paper to report the use of NaF18-PET/CT to image secondary hyperparathyroidism, osteomalacia, mixed renal ostedystrophy and adyanmic bone disease.

  5. NaF18-PET/CT imaging of second hyperparathyroidism

    International Nuclear Information System (INIS)

    Win, Aung Zaw; Aparici, Carina Mari

    2015-01-01

    The patient was a 59-year-old man with a history of hypertension and end-stage renal disease for 14 years. An NaF-18 positron emission tomography/CT bone scan was ordered to rule out osteosarcoma or other possible bone malignancies. A lesion representing a brown tumor was observed on the left femoral shaft. The incidence of ESRD is about 400 cases per million in the United States and it has risen fastest in older individuals. This is the second paper to report the use of NaF18-PET/CT to image secondary hyperparathyroidism, osteomalacia, mixed renal ostedystrophy and adyanmic bone disease

  6. Effects of NaF evaporation during low temperature Cu(In,Ga)Se{sub 2} growth

    Energy Technology Data Exchange (ETDEWEB)

    Bissig, B., E-mail: benjamin.bissig@empa.ch; Reinhard, P.; Pianezzi, F.; Hagendorfer, H.; Nishiwaki, S.; Buecheler, S.; Tiwari, A.N.

    2015-05-01

    Co-evaporation of NaF during the 3{sup rd} stage of the low temperature Cu(In,Ga)Se{sub 2} multi-stage process is compared to post-deposition treatment (PDT) with NaF in view of their influence on the electronic and structural properties. In case of NaF co-evaporation, quantum efficiency losses in the near infrared region and thus lower short circuit current density cause a reduced efficiency compared to solar cells prepared with NaF PDT. The formation of a deep defect with activation energy of ~ 250 meV is measured by capacitance spectroscopy and can explain the deteriorated performance in such devices. In addition, NaF co-evaporation during the 3{sup rd} stage causes reduced grain size in the top part of Cu(In,Ga)Se{sub 2} and altered In, Ga, and Cu distribution. - Highlights: • NaF was co-evaporated in a low temperature CIGS process during and after the 3rd stage. • CIGS grains size is reduced in the top 300 nm when NaF is co-evaporated. • C-f measurements indicate deep defect formation when NaF is co-evaporated.

  7. Combinatorial study of NaF addition in CIGSe films for high efficiency solar cells

    KAUST Repository

    Eid, Jessica; Liang, Haifan; Gereige, Issam; Lee, Sang; Van Duren, Jeroen K J

    2013-01-01

    We report on a sodium fluoride (NaF) thickness variation study for the H2Se batch furnace selenization of sputtered Cu(In,Ga) films in a wide range of Cu(In,Ga) film compositions to form Cu(In,Ga)Se2 (CIGSe) films and solar cells. Literature review indicates lack of consensus on the mechanisms involved in Na altering CIGSe film properties. In this work, for sputtered and batch-selenized CIGSe, NaF addition results in reduced gallium content and an increase in grain size for the top portion of the CIGSe film, as observed by scanning electron microscopy and secondary ion mass spectrometry. The addition of up to 20nm of NaF resulted in an improvement in all relevant device parameters: open-circuit voltage, short-circuit current, and fill factor. The best results were found for 15nm NaF addition, resulting in solar cells with 16.0% active-area efficiency (without anti-reflective coating) at open-circuit voltage (VOC) of 674mV. © 2013 John Wiley & Sons, Ltd.

  8. Combinatorial study of NaF addition in CIGSe films for high efficiency solar cells

    KAUST Repository

    Eid, Jessica

    2013-12-04

    We report on a sodium fluoride (NaF) thickness variation study for the H2Se batch furnace selenization of sputtered Cu(In,Ga) films in a wide range of Cu(In,Ga) film compositions to form Cu(In,Ga)Se2 (CIGSe) films and solar cells. Literature review indicates lack of consensus on the mechanisms involved in Na altering CIGSe film properties. In this work, for sputtered and batch-selenized CIGSe, NaF addition results in reduced gallium content and an increase in grain size for the top portion of the CIGSe film, as observed by scanning electron microscopy and secondary ion mass spectrometry. The addition of up to 20nm of NaF resulted in an improvement in all relevant device parameters: open-circuit voltage, short-circuit current, and fill factor. The best results were found for 15nm NaF addition, resulting in solar cells with 16.0% active-area efficiency (without anti-reflective coating) at open-circuit voltage (VOC) of 674mV. © 2013 John Wiley & Sons, Ltd.

  9. Tricalcium phosphate based resorbable ceramics: Influence of NaF and CaO addition

    Energy Technology Data Exchange (ETDEWEB)

    Seeley, Zachary; Bandyopadhyay, Amit [W. M. Keck Biomedical Materials Research Lab, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164 (United States); Bose, Susmita [W. M. Keck Biomedical Materials Research Lab, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164 (United States)], E-mail: sbose@wsu.edu

    2008-01-10

    Resorbable bioceramics have gained much attention due to their time-varying mechanical properties in-vivo. Implanted ceramics degrade allowing bone in-growth and eventual replacement of the artificial material with natural tissue. Calcium phosphate based materials have caught the most significant attention because of their excellent biocompatibility and compositional similarities to natural bone. Doping these ceramics with various metal ions has significantly influenced their properties. In this study, tricalcium phosphate (TCP) compacts were fabricated via uniaxial compression with five compositions: (i) pure TCP, (ii) TCP with 2.0 wt.% NaF, (iii) TCP with 3.0 wt.% CaO, (iv) TCP with a binary of 2.0 wt.% NaF and 0.5 wt.% Ag{sub 2}O, and (v) TCP with a quaternary of 1.0 wt.% TiO{sub 2}, 0.5 wt.% Ag{sub 2}O, 2.0 wt.% NaF, and 3.0 wt.% CaO. These compacts were sintered at 1250 deg. C for 4 h to obtain dense ceramic structures. Phase analyses were carried out using X-ray diffraction. The presence of NaF in TCP improved densification and increased compression strength from 70 ({+-} 25) to 130 ({+-} 40) MPa. Addition of CaO had no influence on density or strength. Human osteoblast cell growth behavior was studied using an osteoprecursor cell line (OPC 1) to assure that the biocompatibility of these ceramics was not altered due to the dopants. For long-term biodegradation studies, density, weight change, surface microstructure, and uniaxial compression strength were measured as a function of time in a simulated body fluid (SBF). Weight gain in SBF correlated strongly with precipitation viewed in the inter-connected pores of the samples. After 3 months in SBF, all samples displayed a reduction in strength. NaF, CaO and the quaternary compositions maintained the most steady strength loss under SBF.

  10. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Ziemkiewicz, Paul; Vandivort, Tamara; Pflughoeft-Hassett, Debra; Chugh, Y Paul; Hower, James

    2008-08-31

    Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, “clean coal” combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered “allowable” under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and privatesector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

  11. Technology for recovery of by-products

    International Nuclear Information System (INIS)

    Van Tuy, H.H.

    1983-01-01

    Products of conventional nuclear fuel processing plants are uranium and plutonium, and any other recovered material is considered to be a by-product. Some by-products have been recovered from past nuclear fuel processing operations, either as a normal mode of operation or by special campaigns. Routing recovery over an extended period has been limited to neptunium, but extended campaigns were used at Hanford to recover strontium for radioisotope thermoelectric generators. Krypton is recovered at Idaho Chemical Processing Plant on a campaign basis, and isotope separation of krypton is done at Oak Ridge National Laboratory. Past campaigns at Hanford PUREX have recovered cesium, promethium, amercium, cerium, and technetium. Past by-product recovery efforts were usually severely constrained by the status of flowsheet development and availability of existing facilities at the time decisions wee made to recover the by-products. Additional processes were developed to accommodate other unit operations and in response to changes in waste management objectives or user requirements. Now an impressive variety of recovery technology is available for most potential by-products, with varying degrees of demonstration under conditions which satisfy today's environmental protection and waste management constraints

  12. Influence of different naf concentration on the mechanical and morphological properties on sintered β-TCP; Estudo das propriedades mecanicas e morfologicas de [Beta]-fosfato tricalcico sinterizado com a adicao de diferentes concentracoes de NaF

    Energy Technology Data Exchange (ETDEWEB)

    Saito, L.; Cardoso, H.A.I.; Zavaglia, C.A.C., E-mail: liasaito89@gmail.com [Universidade Estadual de Campinas (LABIOMEC/UNICAMP), SP (Brazil); Motisuke, M. [Universidade Federal de Sao Paulo (UNIFESP), SP (Brazil)

    2011-07-01

    Among the bioceramics, [beta]-tricalcium phosphate, β-TCP, is currently used in biomedical applications due to its in vivo reabsorption and chemical composition, important for bone formation and repair. Researchers showed that the addition of sodium fluoride (NaF) up to 2wt.% increases β-TCP mechanical properties without altering its biocompatibility and bioactivity. In this work, the effect of different NaF concentrations (2wt.% to 5wt.%) on β-TCP properties was studied. The samples were sintered at 1250 deg C during four hours. Afterwards, it were determined its mechanical resistance, density, morphology and chemical composition as a function of NaF content. The results showed that the presence of NaF does not lead to an increase on the mechanical properties. This fact is probably related to the formation of a mixture of TCP, apatite and sodium and calcium phosphates; and a visible increase on samples' density.(author)

  13. Nutrient-deprivation autophagy factor-1 (NAF-1: biochemical properties of a novel cellular target for anti-diabetic drugs.

    Directory of Open Access Journals (Sweden)

    Sagi Tamir

    Full Text Available Nutrient-deprivation autophagy factor-1 (NAF-1 (synonyms: Cisd2, Eris, Miner1, and Noxp70 is a [2Fe-2S] cluster protein immune-detected both in endoplasmic reticulum (ER and mitochondrial outer membrane. It was implicated in human pathology (Wolfram Syndrome 2 and in BCL-2 mediated antagonization of Beclin 1-dependent autophagy and depression of ER calcium stores. To gain insights about NAF-1 functions, we investigated the biochemical properties of its 2Fe-2S cluster and sensitivity of those properties to small molecules. The structure of the soluble domain of NAF-1 shows that it forms a homodimer with each protomer containing a [2Fe-2S] cluster bound by 3 Cys and one His. NAF-1 has shown the unusual abilities to transfer its 2Fe-2S cluster to an apo-acceptor protein (followed in vitro by spectrophotometry and by native PAGE electrophoresis and to transfer iron to intact mitochondria in cell models (monitored by fluorescence imaging with iron fluorescent sensors targeted to mitochondria. Importantly, the drug pioglitazone abrogates NAF-1's ability to transfer the cluster to acceptor proteins and iron to mitochondria. Similar effects were found for the anti-diabetes and longevity-promoting antioxidant resveratrol. These results reveal NAF-1 as a previously unidentified cell target of anti-diabetes thiazolidinedione drugs like pioglitazone and of the natural product resveratrol, both of which interact with the protein and stabilize its labile [2Fe-2S] cluster.

  14. Effect of divalent impurities on some physical properties of LiF and NaF

    International Nuclear Information System (INIS)

    Laj, C.

    1969-05-01

    The ionic thermo-currents technique is applied to the study of impurity vacancy dipoles in LiF and NaF doped with several divalent cations. In LiF only one ITC band is observed whatever the impurity studied. In NaF on the contrary two ITC bands are present, one corresponding to the one observed in LiF, the other one, intense in the case of small impurities, at lower temperature. A parallel EPR study in the case of Mn 2+ doped samples shows that the band observed in LiF and the corresponding one in NaF are due to the relaxation of dipoles formed by the association of an impurity and a vacancy in the next nearest position. The knowledge of the properties of the dipoles allows to show that the room temperature ionic conductivity of LiF is conditioned by the equilibrium: M ++ □+ → M ++ + □+. It is also shown that the isolated cation vacancy originating from this dissociation is responsible for the enhancement of γ-ray coloration of LiF doped with divalent cation impurities. A paramagnetic center ascribed to the presence of Mn 0 isolated in the lattice is also studied. The value of the hyperfine interaction and its temperature dependence are in good agreement with both the theory and the other experimental results. Finally it is shown that the disappearance of dipoles by annealing is related to the formation of complexes involving OH - ions, probably of the M(OH) 2 type, with the two OH - ions occupying a single fluorine site. (author) [fr

  15. Some physical properties of anhydrous and hydrated Brownmillerite doped with NaF

    International Nuclear Information System (INIS)

    Hassaan, M.Y.; El Desoky, M.M.; Salem, S.M.; Yousif, A.A.

    2003-01-01

    Different samples of Brownmillerite (the ferrite phase of cement clinker) doped with 0, 1 or 3 wt.% NaF were prepared. At first, the oxide mixture of Brownmillerite was prepared according to the following composition: 4 mol CaO, 1 mol Al 2 O 3 and 1 mol Fe 2 O 3 in addition to 1 or 3 wt.% NaF. Each mixture was mixed very well, introduced into an electric furnace at 1300 deg. C for 1 h in a platinum crucible, and then quenched in air. The product was divided into four portions mixed with 40 wt.% distilled water to form Brownmillerite paste, except for one portion which was left dry. Each paste was molded into two molds; after 24 h, they were immersed in a distilled water and withdrawn after 1 or 3 days of hydration, respectively. The pastes were ground again. The anhydrous powders of Brownmillerites and the hydrated samples were prepared for a.c. conduction measurements by pressing it to be in pellets form. The two surfaces of each pellet were coated with silver paste. The a.c. conductivity and dielectric constant for different samples were measured using four-probe method. The data was collected from 320 up to 670 K. Moessbauer spectra and X-ray diffraction patterns were measured for each sample (anhydrous and hydrated) to confirm the formation of Brownmillerite, identify the iron states and the magnetic properties. The results showed that NaF addition to Brownmillerite expedites the hydration reaction rate. The superparamagnetic relaxation, which appeared in the anhydrous Brownmillerite spectra due to the small particle size, decreases with increasing the hydration time. Also, the Fe 3+ (Oh) state increases while Fe 3+ (Td) decreases with the time of hydration. The a.c. conductivity value at fixed frequency for anhydrous and hydrated samples was found to increase with NaF addition. The a.c. conductivity and Moessbauer measurements can be used as good tools to verify the purity of Brownmillerite phase and, accordingly, the purity of cement

  16. Unusual soft tissue uptake of F-18 sodium fluoride in three patients undergoing F-18 NaF PET/CT bone scans for prostate cancer

    Energy Technology Data Exchange (ETDEWEB)

    Hawkins, Andrew S.; Howard, Brandon A. [Div. of Nuclear Medicine, Dept. of Radiology, Duke University Medical Center, Durham (United States)

    2017-09-15

    Three males aged 71 to 80 years with known stage IV metastatic prostate cancer underwent F-18 sodium fluoride (NaF) PET/CT to assess osseous metastatic disease burden and stability. In addition to F-18 NaF avid known osseous metastases, each patient also exhibited increased F-18 NaF activity in soft tissues. The first patient exhibited multiple F-18 NaF avid enlarged retroperitoneal and pelvic lymph nodes on consecutive PET/CT scans. The second patient demonstrated an F-18 NaF avid thyroid nodule on consecutive PET/CT scans. The third patient exhibited increased F-18 NaF activity in a hepatic metastasis.

  17. Resveratrol-Induced Downregulation of NAF-1 Enhances the Sensitivity of Pancreatic Cancer Cells to Gemcitabine via the ROS/Nrf2 Signaling Pathways

    Directory of Open Access Journals (Sweden)

    Liang Cheng

    2018-01-01

    Full Text Available NAF-1 (nutrient-deprivation autophagy factor-1, which is an outer mitochondrial membrane protein, is known to play important roles in calcium metabolism, antiapoptosis, and antiautophagy. Resveratrol, a natural polyphenolic compound, is considered as a potent anticancer agent. Nevertheless, the molecular mechanisms underlying the effects of resveratrol and NAF-1 and their mediation of drug resistance in pancreatic cancer remain unclear. Here, we demonstrate that resveratrol suppresses the expression of NAF-1 in pancreatic cancer cells by inducing cellular reactive oxygen species (ROS accumulation and activating Nrf2 signaling. In addition, the knockdown of NAF-1 activates apoptosis and impedes the proliferation of pancreatic cancer cells. More importantly, the targeting of NAF-1 by resveratrol can improve the sensitivity of pancreatic cancer cells to gemcitabine. These results highlight the significance of strategies that target NAF-1, which may enhance the efficacy of gemcitabine in pancreatic cancer therapy.

  18. A point mutation in the [2Fe–2S] cluster binding region of the NAF-1 protein (H114C) dramatically hinders the cluster donor properties

    Energy Technology Data Exchange (ETDEWEB)

    Tamir, Sagi; Eisenberg-Domovich, Yael [The Hebrew University of Jerusalem, Edmond J. Safra Campus at Givat Ram, Jerusalem 91904 (Israel); Conlan, Andrea R.; Stofleth, Jason T.; Lipper, Colin H.; Paddock, Mark L. [University of California at San Diego, La Jolla, CA 92093 (United States); Mittler, Ron [University of North Texas, Denton, TX 76203 (United States); Jennings, Patricia A. [University of California at San Diego, La Jolla, CA 92093 (United States); Livnah, Oded, E-mail: oded.livnah@huji.ac.il; Nechushtai, Rachel, E-mail: oded.livnah@huji.ac.il [The Hebrew University of Jerusalem, Edmond J. Safra Campus at Givat Ram, Jerusalem 91904 (Israel)

    2014-06-01

    NAF-1 has been shown to be related with human health and disease, is upregulated in epithelial breast cancer and suppression of its expression significantly suppresses tumor growth. It is shown that replacement of the single His ligand with Cys resulted in dramatic changes to the properties of its 2Fe-2S clusters without any global crystal structural changes. NAF-1 is an important [2Fe–2S] NEET protein associated with human health and disease. A mis-splicing mutation in NAF-1 results in Wolfram Syndrome type 2, a lethal childhood disease. Upregulation of NAF-1 is found in epithelial breast cancer cells, and suppression of NAF-1 expression by knockdown significantly suppresses tumor growth. Key to NAF-1 function is the NEET fold with its [2Fe–2S] cluster. In this work, the high-resolution structure of native NAF-1 was determined to 1.65 Å resolution (R factor = 13.5%) together with that of a mutant in which the single His ligand of its [2Fe–2S] cluster, His114, was replaced by Cys. The NAF-1 H114C mutant structure was determined to 1.58 Å resolution (R factor = 16.0%). All structural differences were localized to the cluster binding site. Compared with native NAF-1, the [2Fe–2S] clusters of the H114C mutant were found to (i) be 25-fold more stable, (ii) have a redox potential that is 300 mV more negative and (iii) have their cluster donation/transfer function abolished. Because no global structural differences were found between the mutant and the native (wild-type) NAF-1 proteins, yet significant functional differences exist between them, the NAF-1 H114C mutant is an excellent tool to decipher the underlying biological importance of the [2Fe–2S] cluster of NAF-1 in vivo.

  19. A point mutation in the [2Fe–2S] cluster binding region of the NAF-1 protein (H114C) dramatically hinders the cluster donor properties

    International Nuclear Information System (INIS)

    Tamir, Sagi; Eisenberg-Domovich, Yael; Conlan, Andrea R.; Stofleth, Jason T.; Lipper, Colin H.; Paddock, Mark L.; Mittler, Ron; Jennings, Patricia A.; Livnah, Oded; Nechushtai, Rachel

    2014-01-01

    NAF-1 has been shown to be related with human health and disease, is upregulated in epithelial breast cancer and suppression of its expression significantly suppresses tumor growth. It is shown that replacement of the single His ligand with Cys resulted in dramatic changes to the properties of its 2Fe-2S clusters without any global crystal structural changes. NAF-1 is an important [2Fe–2S] NEET protein associated with human health and disease. A mis-splicing mutation in NAF-1 results in Wolfram Syndrome type 2, a lethal childhood disease. Upregulation of NAF-1 is found in epithelial breast cancer cells, and suppression of NAF-1 expression by knockdown significantly suppresses tumor growth. Key to NAF-1 function is the NEET fold with its [2Fe–2S] cluster. In this work, the high-resolution structure of native NAF-1 was determined to 1.65 Å resolution (R factor = 13.5%) together with that of a mutant in which the single His ligand of its [2Fe–2S] cluster, His114, was replaced by Cys. The NAF-1 H114C mutant structure was determined to 1.58 Å resolution (R factor = 16.0%). All structural differences were localized to the cluster binding site. Compared with native NAF-1, the [2Fe–2S] clusters of the H114C mutant were found to (i) be 25-fold more stable, (ii) have a redox potential that is 300 mV more negative and (iii) have their cluster donation/transfer function abolished. Because no global structural differences were found between the mutant and the native (wild-type) NAF-1 proteins, yet significant functional differences exist between them, the NAF-1 H114C mutant is an excellent tool to decipher the underlying biological importance of the [2Fe–2S] cluster of NAF-1 in vivo

  20. TU-C-12A-12: Differentiating Bone Lesions and Degenerative Joint Disease in NaF PET/CT Scans Using Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Perk, T; Bradshaw, T; Muzahir, S; Jeraj, R [University of Wisconsin, Madison, Wisconsin (United States); Meyer, E [Case Western Reserve University School of Medicine, Cleveland, Ohio (United States)

    2014-06-15

    Purpose: [F-18]NaF PET can be used to image bone metastases; however, tracer uptake in degenerative joint disease (DJD) often appears similar to metastases. This study aims to develop and compare different machine learning algorithms to automatically identify regions of [F-18]NaF scans that correspond to DJD. Methods: 10 metastatic prostate cancer patients received whole body [F-18]NaF PET/CT scans prior to treatment. Image segmentation resulted in 852 ROIs, 69 of which were identified by a nuclear medicine physician as DJD. For all ROIs, various PET and CT textural features were computed. ROIs were divided into training and testing sets used to train eight different machine learning classifiers. Classifiers were evaluated based on receiver operating characteristics area under the curve (AUC), sensitivity, specificity, and positive predictive value (PPV). We also assessed the added value of including CT features in addition to PET features for training classifiers. Results: The training set consisted of 37 DJD ROIs with 475 non-DJD ROIs, and the testing set consisted of 32 DJD ROIs with 308 non-DJD ROIs. Of all classifiers, generalized linear models (GLM), decision forests (DF), and support vector machines (SVM) had the best performance. AUCs of GLM (0.929), DF (0.921), and SVM (0.889) were significantly higher than the other models (p<0.001). GLM and DF, overall, had the best sensitivity, specificity, and PPV, and gave a significantly better performance (p<0.01) than all other models. PET/CT GLM classifiers had higher AUC than just PET or just CT. GLMs built using PET/CT information had superior or comparable sensitivities, specificities and PPVs to just PET or just CT. Conclusion: Machine learning algorithms trained with PET/CT features were able to identify some cases of DJD. GLM outperformed the other classification algorithms. Using PET and CT information together was shown to be superior to using PET or CT features alone. Research supported by the Prostate

  1. TU-C-12A-12: Differentiating Bone Lesions and Degenerative Joint Disease in NaF PET/CT Scans Using Machine Learning

    International Nuclear Information System (INIS)

    Perk, T; Bradshaw, T; Muzahir, S; Jeraj, R; Meyer, E

    2014-01-01

    Purpose: [F-18]NaF PET can be used to image bone metastases; however, tracer uptake in degenerative joint disease (DJD) often appears similar to metastases. This study aims to develop and compare different machine learning algorithms to automatically identify regions of [F-18]NaF scans that correspond to DJD. Methods: 10 metastatic prostate cancer patients received whole body [F-18]NaF PET/CT scans prior to treatment. Image segmentation resulted in 852 ROIs, 69 of which were identified by a nuclear medicine physician as DJD. For all ROIs, various PET and CT textural features were computed. ROIs were divided into training and testing sets used to train eight different machine learning classifiers. Classifiers were evaluated based on receiver operating characteristics area under the curve (AUC), sensitivity, specificity, and positive predictive value (PPV). We also assessed the added value of including CT features in addition to PET features for training classifiers. Results: The training set consisted of 37 DJD ROIs with 475 non-DJD ROIs, and the testing set consisted of 32 DJD ROIs with 308 non-DJD ROIs. Of all classifiers, generalized linear models (GLM), decision forests (DF), and support vector machines (SVM) had the best performance. AUCs of GLM (0.929), DF (0.921), and SVM (0.889) were significantly higher than the other models (p<0.001). GLM and DF, overall, had the best sensitivity, specificity, and PPV, and gave a significantly better performance (p<0.01) than all other models. PET/CT GLM classifiers had higher AUC than just PET or just CT. GLMs built using PET/CT information had superior or comparable sensitivities, specificities and PPVs to just PET or just CT. Conclusion: Machine learning algorithms trained with PET/CT features were able to identify some cases of DJD. GLM outperformed the other classification algorithms. Using PET and CT information together was shown to be superior to using PET or CT features alone. Research supported by the Prostate

  2. Leptin expression in breast nipple aspirate fluid (NAF) and serum is influenced by body mass index (BMI) but not by the presence of breast cancer.

    Science.gov (United States)

    Sauter, E R; Garofalo, C; Hewett, J; Hewett, J E; Morelli, C; Surmacz, E

    2004-05-01

    While obesity is a known risk factor for postmenopausal breast cancer, the molecular mechanisms involved are unclear. Systemic levels of leptin, the product of the ob (obesity) gene, are increased in obese individuals (body mass index, BMI, over 25) and are higher in women than men. Leptin has been found to stimulate the growth of breast cancer cells in vitro. Our goal was to determine whether leptin was 1) present in nipple aspirate fluid (NAF), and 2) whether NAF leptin levels were associated with a) levels in serum, b) obesity, and c) breast cancer. We collected and evaluated NAF specimens from 83 subjects and serum specimens from 49 subjects. NAF leptin was detectable in 16/41 (39 %) of premenopausal and 21/42 (50 %) postmenopausal subjects. NAF leptin was significantly lower (p = 0.042) in premenopausal than postmenopausal women with a BMI < 25, but not in those with a higher BMI. NAF leptin was significantly associated with BMI in premenopausal (p = 0.011) but not in postmenopausal women. Serum leptin was associated with BMI in both premenopausal and postmenopausal women (p = 0.0001 for both). NAF and serum leptin were associated in premenopausal (p = 0.02) but not postmenopausal women. Neither NAF nor serum leptin was associated with premenopausal or postmenopausal breast cancer. Our findings include that 1) leptin is present in the breast and detectable in a subset of NAF samples, 2) NAF leptin in premenopausal but not postmenopausal women parallels serum leptin levels, and 3) neither NAF nor serum levels of leptin were associated with premenopausal or postmenopausal breast cancer.

  3. Formaldehyde emissions from ULEF- and NAF-bonded commercial hardwood plywood as influenced by temperature and relative humidity

    Science.gov (United States)

    Charles R. Frihart; James M. Wescott; Michael J. Birkeland; Kyle M. Gonner

    2010-01-01

    It is well documented in the literature that temperature and humidity can influence formaldehyde emissions from composite panels that are produced using urea-formaldehyde (UF) adhesives. This work investigates the effect of temperature and humidity on newer, ultra-low emitting formaldehyde urea formaldehyde (ULEF-UF) and no-added formaldehyde (NAF) adhesives. A...

  4. The toxicity of NaF on BmN cells and a comparative proteomics approach to identify protein expression changes in cells under NaF-stress

    International Nuclear Information System (INIS)

    Chen, Liang; Chen, Huiqing; Yao, Chun; Chang, Cheng; Xia, Hengchuan; Zhang, Chunxia; Zhou, Yang; Yao, Qin; Chen, Keping

    2015-01-01

    Highlights: • On the cellular level, we identified IC 50 of NaF on BmN cell by flow cytometry. • High concentration of NaF gives effect on BmN cell morphology. • Five significantly differential proteins were identified by two-dimensional electrophoresis and mass spectrometry. • ALDH2 and WPH were up-regulated, while CRT and SCF were down-regulated, providing new information for metabolic pathway of fluoride. - Abstract: Fluorides negatively affect the development of organisms and are a threat to human health and environmental safety. In this study, Bombyx mori N cell line (BmN) were used to explore effects of NaF on insect cells. We found that 8 h (hrs) culture with high concentration of NaF (≥1 mM) induced significantly morphological changes. Dose-response curves of 72 h continuously cultured BmN treated with NaF showed that the half inhibitory concentration (IC 50 ) value was 56.60 μM. Treatment of BmN with 100 and 300 μM of NaF induced apoptosis and necrosis. 2-D electrophoresis of whole cell extracted from BmN showed that treatment with 300 μM NaF up-regulated 32 proteins and down-regulated 11 proteins when compared with controls. We identified 5 different proteins by MALDI-TOF MS, and 4 of them were identified for the first time, including 2 up-regulated proteins (mitochondrial aldehyde dehydrogenase ALDH2 and prohibitin protein WPH) and 2 down-regulated proteins (calreticulin precursor CRT and DNA supercoiling factor SCF). These observations were further confirmed by fluorescence quantitative PCR. Together, our data suggest that these target proteins could be regarded as targets influenced by NaF and also provide clues for studies on the response metabolism pathway under NaF stress

  5. The toxicity of NaF on BmN cells and a comparative proteomics approach to identify protein expression changes in cells under NaF-stress

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Liang; Chen, Huiqing [Institute of Life Sciences, Jiangsu University, Zhenjiang, Jiangsu 212013 (China); Yao, Chun [Department of Stomatology, Zhenjiang First People’s Hospital, Zhenjiang, Jiangsu 212013 (China); Chang, Cheng; Xia, Hengchuan; Zhang, Chunxia; Zhou, Yang; Yao, Qin [Institute of Life Sciences, Jiangsu University, Zhenjiang, Jiangsu 212013 (China); Chen, Keping, E-mail: kpchen@ujs.edu.cn [Institute of Life Sciences, Jiangsu University, Zhenjiang, Jiangsu 212013 (China)

    2015-04-09

    Highlights: • On the cellular level, we identified IC{sub 50} of NaF on BmN cell by flow cytometry. • High concentration of NaF gives effect on BmN cell morphology. • Five significantly differential proteins were identified by two-dimensional electrophoresis and mass spectrometry. • ALDH2 and WPH were up-regulated, while CRT and SCF were down-regulated, providing new information for metabolic pathway of fluoride. - Abstract: Fluorides negatively affect the development of organisms and are a threat to human health and environmental safety. In this study, Bombyx mori N cell line (BmN) were used to explore effects of NaF on insect cells. We found that 8 h (hrs) culture with high concentration of NaF (≥1 mM) induced significantly morphological changes. Dose-response curves of 72 h continuously cultured BmN treated with NaF showed that the half inhibitory concentration (IC{sub 50}) value was 56.60 μM. Treatment of BmN with 100 and 300 μM of NaF induced apoptosis and necrosis. 2-D electrophoresis of whole cell extracted from BmN showed that treatment with 300 μM NaF up-regulated 32 proteins and down-regulated 11 proteins when compared with controls. We identified 5 different proteins by MALDI-TOF MS, and 4 of them were identified for the first time, including 2 up-regulated proteins (mitochondrial aldehyde dehydrogenase ALDH2 and prohibitin protein WPH) and 2 down-regulated proteins (calreticulin precursor CRT and DNA supercoiling factor SCF). These observations were further confirmed by fluorescence quantitative PCR. Together, our data suggest that these target proteins could be regarded as targets influenced by NaF and also provide clues for studies on the response metabolism pathway under NaF stress.

  6. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    The Combustion Byproducts Recycling Consortium (CBRC) program was developed as a focused program to remove and/or minimize the barriers for effective management of over 123 million tons of coal combustion byproducts (CCBs) annually generated in the USA. At the time of launching the CBRC in 1998, about 25% of CCBs were beneficially utilized while the remaining was disposed in on-site or off-site landfills. During the ten (10) year tenure of CBRC (1998-2008), after a critical review, 52 projects were funded nationwide. By region, the East, Midwest, and West had 21, 18, and 13 projects funded, respectively. Almost all projects were cooperative projects involving industry, government, and academia. The CBRC projects, to a large extent, successfully addressed the problems of large-scale utilization of CCBs. A few projects, such as the two Eastern Region projects that addressed the use of fly ash in foundry applications, might be thought of as a somewhat smaller application in comparison to construction and agricultural uses, but as a novel niche use, they set the stage to draw interest that fly ash substitution for Portland cement might not attract. With consideration of the large increase in flue gas desulfurization (FGD) gypsum in response to EPA regulations, agricultural uses of FGD gypsum hold promise for large-scale uses of a product currently directed to the (currently stagnant) home construction market. Outstanding achievements of the program are: (1) The CBRC successfully enhanced professional expertise in the area of CCBs throughout the nation. The enhanced capacity continues to provide technology and information transfer expertise to industry and regulatory agencies. (2) Several technologies were developed that can be used immediately. These include: (a) Use of CCBs for road base and sub-base applications; (b) full-depth, in situ stabilization of gravel roads or highway/pavement construction recycled materials; and (c) fired bricks containing up to 30%-40% F

  7. The effects of brushing on human enamel surface roughness after NaF gel and theobromine gel exposure

    Science.gov (United States)

    Mahardhika, A.; Noerdin, A.; Eriwati, Y. K.

    2017-08-01

    This study aimed to determine the effects of brushing on human enamel surface roughness after different exposure times of 200 mg/L theobromine gel (8, 16, and 32 minutes) and 2% NaF gel (16 minutes). Twenty-four human upper premolars were used and divided into four groups. Group 1 was exposed to 2% NaF gel for 16 minutes. In contrast, groups 2, 3, and 4 were exposed to 200 mg/L theobromine gel for 8 minutes, 16 minutes, and 32 minutes, and each group was then brushed for 9 minutes and 20 seconds. After the treatment, samples were tested using a surface roughness tester (Mitutoyo SJ 301, Japan). The Wilcoxon test showed significant changes (p enamel surface and then increase roughness after brushing.

  8. The effects of NaF, Fluor-protector and Aminofluoride on the enamel of permanent teeth in children

    OpenAIRE

    Beloica, Dragan

    1984-01-01

    The effects of three fluor preparation (NaF, Fluor-Protector and Aminofluoride) on the enamel of permanent teeth has been studied by determinig the fluor concentrations in the enamel surface layer and the resistance of enamel to the effects of acids. The fluor preparations were applied to intact extracted teeth. Fluor concentrations were determined in the enamel samples using a Bedkman electrode with pH meter for fliuorides. Acid resistance was established by etching the enamnel samples, prev...

  9. Comparison of fluoride uptake level by enamel from Iranian school brand and standard NaF mouthrinses

    Directory of Open Access Journals (Sweden)

    Gasem Ansari

    2009-03-01

    Full Text Available Background and aims. The use of fluoride mouthrinses has been proved to be one of the most effective ways to prevent tooth decay. A community based program using F+ rinse at school has also proved to be well-controlled and efficient. The aim of this investigation was to evaluate fluoride uptake level of a locally prepared NaF rinse used in Iran’s school program during 2005. Materials and methods. A total of 30 freshly extracted sound human premolars were collected and divided into two groups of 15. Each tooth then underwent two steps of sectioning; first the root was amputated from CEJ and then a longitudinal section was performed in bucco-lingual direction to provide two similar samples of the same tooth. A specific hemi-circular area on either of the experimental halves was treated by NaF rinse from USA or a locally prepared NaF used in school programs. Two subsequent biopsies were taken from each half using acid etch enamel biopsy technique. Fluoride and calcium content of the specimens were measured in order to evaluate fluoride uptake level and biopsy depth effect, respectively. Collected data were recorded in the forms provided and statistical analysis, mostly descriptive, was performed for comparison. Results. Based on the data collected, it appears that the use of F+ rinse would clearly improve enamel quality by a rise in fluoride concentration. Statistical analysis using a paired t-test and repeated measure method revealed that with 95% confidence fluoride concentration increases at both levels of biopsy with no statistically significant differences between the samples treated with two rinses. Conclusion. There seem to be reasonable potential for the clinical use of Iranian brand fluoride mouthrinse. There was no significant difference between the level of uptake from NaF from USA and the Iranian product in 2 layers of enamel biopsy.

  10. Coplanarity of two-proton emissions in 400 MeV/nucleon Ne + NaF, Pb reactions

    International Nuclear Information System (INIS)

    Tanihata, Isao.

    1984-10-01

    Two-proton coincidence spectra have been measured in a wide kinematical range for 20 Ne + NaF and 20 Ne + Pb collisions at 400 MeV/nucleon. Coplanar-type correlations show different feature between Ne + NaF and Ne + Pb target reactions. A strong in-plane correlation, which correspond to quasi-elastic scatterings (QES) of nucleons, was observed in wide angular range (15 to 90 0 ) in NaF target collisions. Angular distributions of QES were reproduced reasonably well by a single nucleon-nucleon scattering model. Enhancement of the QES at momentum transfer around t = 2 - 3m/sub π/, which is predicted as an indication of pionic instability, was not observed. In Ne + Pb collisions, an azimuthally asymmetric emission of particles with respect to the beam axis were implied by the anti-coplanar correlation. A new type of coplanar correlation between the emission angle and the momentum suggests a back-to-back emission of projectile and target nucleons. 8 references, 8 figures

  11. Activity coefficients of NaF in (glucose+water) and (sucrose+water) mixtures at 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Luis, Felipe [Departamento de Quimica Fisica, Universidad de La Laguna, Tenerife (Spain)]. E-mail: ffhelu@ull.es; Galleguillos, Hector R. [Departamento de Ingenieria Quimica, Universidad de Antofagasta, Antofagasta (Chile); Vazquez, Mario V. [Instituto de Quimica, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia, Medellin (Colombia)

    2004-11-01

    The activity coefficients of NaF in (glucose+water) and (sucrose+water) mixtures were experimentally determined at 298.15 K from electromotive force measurements of the following electrochemical cell containing two ion selective electrodes (ISEs):Na-ISE|NaF(m),sugar(Y),H2O(100-Y)|F-ISEThe molality (m) varied between ca. 0.01 mol.kg{sup -1} and saturation, while the mass fractions of sugar in the mixture (Y) were 0, 0.10, 0.20, 0.30 and 0.40. The values for electromotive force were analyzed using different models for describing the variations of the activity coefficients with concentration, including an extended Debye-Huckel, the Pitzer and the Scatchard equations. Results obtained with the different models were in good agreement. Once E{sup -}bar was determined, the mean coefficients of ionic activity for NaF, the free energy of transference from the water to the (sugar+water) mixture, and the primary NaF hydration number were calculated. The variation of these magnitudes with the composition of the mixture is comparative discussed in terms of the ion-solvent and ion-ion interactions with results from the literature for NaCl in (glucose+water) and (sucrose+water) systems.

  12. By-products by design

    International Nuclear Information System (INIS)

    Collins, Richard

    2011-01-01

    Full text: Some mining by-products that are currently stockpiled or disposed of could be put to use preventing nutrients from entering river systems, helping reduce the potential for algal blooms. A joint project between CSIRO and the Western Australia (WA) Department of Water investigated a range of spent materials from mining and industry to determine their ability to filter nutrients from natural waters or to treat wastewater. “The largely unexploited by-product materials we generate in Western Australia could be developed as 'designer' contaminant adsorbents,” said CSIRO project leader Dr Grant Douglas. The use of abundant, low-cost wastes generated from mineral processing, in particular, offers a potentially cost- effective and environmentally-friendly strategy for removing nutrients. “The productive use of the by-products also has the potential to reduce the environmental footprint of mining and mineral processing industries by lowering by-product stockpiles,” he said. But the key benefits are in water; not only improving the health of surface waters but, by facilitating reuse, also easing the competition for water resources in an increasingly climate constrained part of the country. Re-use of industrial by-products in WA is currently considered on a case-by-case basis rather than regulated according to established standards. The project aimed to inject some rigour by characterising for the first time the nutrient, trace element uptake and acid neutralising capacity of a range of low-cost by-products (see Fact File). It also underpinned the development of a draft protocol for screening similar by-products in the future. The comprehensive characterisation included identification and procurement, and basic characterisation of by-products included major and trace element geochemistry, mineralogy, radioactivity, geochemical modelling and leachate chemistry and toxicity. These inherent properties and suitability of by-products for potential environmental

  13. Effect of divalent impurities on some physical properties of LiF and NaF; Influence des impuretes divalentes sur quelques proprietes physiques du LiF et du NaF

    Energy Technology Data Exchange (ETDEWEB)

    Laj, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-05-01

    The ionic thermo-currents technique is applied to the study of impurity vacancy dipoles in LiF and NaF doped with several divalent cations. In LiF only one ITC band is observed whatever the impurity studied. In NaF on the contrary two ITC bands are present, one corresponding to the one observed in LiF, the other one, intense in the case of small impurities, at lower temperature. A parallel EPR study in the case of Mn{sup 2+} doped samples shows that the band observed in LiF and the corresponding one in NaF are due to the relaxation of dipoles formed by the association of an impurity and a vacancy in the next nearest position. The knowledge of the properties of the dipoles allows to show that the room temperature ionic conductivity of LiF is conditioned by the equilibrium: M{sup ++} {open_square}+ {yields} M{sup ++} + {open_square}+. It is also shown that the isolated cation vacancy originating from this dissociation is responsible for the enhancement of {gamma}-ray coloration of LiF doped with divalent cation impurities. A paramagnetic center ascribed to the presence of Mn{sup 0} isolated in the lattice is also studied. The value of the hyperfine interaction and its temperature dependence are in good agreement with both the theory and the other experimental results. Finally it is shown that the disappearance of dipoles by annealing is related to the formation of complexes involving OH{sup -} ions, probably of the M(OH){sub 2} type, with the two OH{sup -} ions occupying a single fluorine site. (author) [French] La technique des thermocourants ioniques est appliquee a l'etude des dipoles lacune-impurete dans LiF et NaF dopes avec plusieurs cations divalents. Dans LiF on met en evidence un seul pic de thermocourant quelle que soit l'impurete consideree. Dans NaF au contraire deux pics de thermocourants sont presents, l'un correspondant a celui observe dans LiF, l'autre, dominant dans le cas des impuretes de petite taille, a plus basse temperature. Une etude parallelle

  14. Effect of divalent impurities on some physical properties of LiF and NaF; Influence des impuretes divalentes sur quelques proprietes physiques du LiF et du NaF

    Energy Technology Data Exchange (ETDEWEB)

    Laj, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-05-01

    The ionic thermo-currents technique is applied to the study of impurity vacancy dipoles in LiF and NaF doped with several divalent cations. In LiF only one ITC band is observed whatever the impurity studied. In NaF on the contrary two ITC bands are present, one corresponding to the one observed in LiF, the other one, intense in the case of small impurities, at lower temperature. A parallel EPR study in the case of Mn{sup 2+} doped samples shows that the band observed in LiF and the corresponding one in NaF are due to the relaxation of dipoles formed by the association of an impurity and a vacancy in the next nearest position. The knowledge of the properties of the dipoles allows to show that the room temperature ionic conductivity of LiF is conditioned by the equilibrium: M{sup ++} {open_square}+ {yields} M{sup ++} + {open_square}+. It is also shown that the isolated cation vacancy originating from this dissociation is responsible for the enhancement of {gamma}-ray coloration of LiF doped with divalent cation impurities. A paramagnetic center ascribed to the presence of Mn{sup 0} isolated in the lattice is also studied. The value of the hyperfine interaction and its temperature dependence are in good agreement with both the theory and the other experimental results. Finally it is shown that the disappearance of dipoles by annealing is related to the formation of complexes involving OH{sup -} ions, probably of the M(OH){sub 2} type, with the two OH{sup -} ions occupying a single fluorine site. (author) [French] La technique des thermocourants ioniques est appliquee a l'etude des dipoles lacune-impurete dans LiF et NaF dopes avec plusieurs cations divalents. Dans LiF on met en evidence un seul pic de thermocourant quelle que soit l'impurete consideree. Dans NaF au contraire deux pics de thermocourants sont presents, l'un correspondant a celui observe dans LiF, l'autre, dominant dans le cas des impuretes de petite taille, a plus basse temperature

  15. In vitro assessments of experimental NaF dentifrices containing a prospective calcium phosphate technology.

    Science.gov (United States)

    Karlinsey, Robert L; Mackey, Allen C; Stookey, George K; Pfarrer, Aaron M

    2009-06-01

    To determine the fluoride dose response of experimental NaF dentifrices containing a prospective calcium phosphate technology, along with the corresponding relative enamel and dentin abrasion values. 3 mm diameter bovine enamel specimens were mounted, ground and polished, and softened in a carbopol-lactic acid solution (pH = 5.0) for 36 hours at 37 degrees C. Specimens were then measured for baseline Vickers microhardness and stratified (N = 18, mean VHN = 33) into eight groups. These groups consisted of a placebo paste, four test dentifrices (A, B, C, D) with three of the four (A, B, C) containing a promising calcium phosphate ingredient, Crest Cavity Protection, MI Paste Plus, and PreviDent Booster 5000. The groups were cycled in a lesion reversal pH cycling model consisting of four 2-minute treatment periods (diluted 1:3 with DI water) and one 4-hour acid challenge (carbopol-lactic acid, pH = 5.0) per day. Between these events, specimens were immersed in artificial saliva (pH = 7.0). After 20 days of cycling, the specimens were microdrilled and analyzed for fluoride content, and also measured for Vickers surface microhardness after 10 and 20 days of cycling and after a 2-hour and 16-hour post-cycle acid challenge (carbopol-lactic acid, pH = 5.0). Separately, relative dentin and enamel abrasion (RDA and REA) were performed using the ADA recommended radiotracer method. A fluoride dose response was observed for the test dentifrices after 10 and 20 days of pH cycling, with test dentifrice C promoting the highest remineralization among the groups while both the MI Paste Plus and PreviDent systems provide the least remineralization (one-way ANOVA, SNK, P dentin (one-way ANOVA, SNK, P < 0.05). Altogether, these data show the developmental test dentifrices demonstrate a fluoride dose response and show great promise in remineralizing white-spot enamel lesions relative to MI Paste Plus and PreviDent.

  16. Bioinspiration and Biomimicry: Possibilities for Cotton Byproducts

    Science.gov (United States)

    The byproducts from cotton gins have commonly been referred to as cotton gin trash or cotton gin waste primarily because the lint and seed were the main focus of the operation and the byproducts were a financial liability that did not have a consistent market. Even though the byproducts were called ...

  17. WE-H-207A-05: Spatial Co-Localization of F-18 NaF Vs. F-18 FDG Defined Disease Volumes

    Energy Technology Data Exchange (ETDEWEB)

    Ferjancic, P; Harmon, S; Jeraj, R [University of Wisconsin, Madison, WI (United States); Chen, S [1st Hospital of China Medical University, Shenyang, Liaoning (China); Simoncic, U [Jozef Stefan Institute, Ljubljana (Slovenia)

    2016-06-15

    Purpose: Both [F-18]NaF and [F-18]FDG show promise for quantitative PET/CT assessment in metastatic prostate cancer to bone. Broad agreement between the tracers has been shown but voxel-wise correspondence has not been explored in depth. This study evaluates the spatial co-localization of [F-18]NaF PET and [F-18]FDG PET in bone lesions. Methods: Seventy-three lesion contours were identified in six patients receiving dynamic NaF PET/CT and FDG PET/CT scans two hours apart using identical fields-of-view. Tracer uptake (SUV) reflecting 60 minutes post-injection was modeled from kinetic parameters. Lesions were segmented by a physician separately on NaF PET and FDG PET. PET images were rigidly aligned using skeletal references on CT images. Lesion size, degree of overlap, voxel-wise tracer uptake values (SUV), and CT density distributions were compared using Dice coefficient, Positive Predictive Value (PPV), and Spearman rank correlation tests. Results: Across all patients, 42 lesions were identified on NaF PET (median 1.4 cm{sup 3}, range <1–204 cm{sup 3}) compared to 31 using FDG PET (median 1.8 cm{sup 3}, range <1–244 cm{sup 3}). Spatial cooccurrence was found in 25 lesion pairs. Lesions on NaF PET had PPV of 0.91 and on FDG a PPV of 0.65. Overall, NaF-defined lesions were 47% (±24%) larger by volume with moderate overlap to FDG, resulting in mean Dice coefficient of 34% (±22%). In areas of overlap, voxel-wise correlation of NaF and FDG SUV was moderate (ρ=0.56). Expanding to regions of non-spatial overlap, voxels contained in FDG-only contours were almost exclusively low HU (median 118), compared to dense regions of NaF-only voxels (median 250). In sclerotic sub-volumes (HU > 300) NaF-defined contours encompassed 83% of total FDG volume. Conclusion: Moderate voxel-wise correlation of FDG and NaF PET/CT uptake was observed. Spatial discrepancies in FDG and NaF PET/CT imaging of boney metastases could be influenced by poor sensitivity of FDG PET/CT in

  18. Biocide by-products in aquatic environments. Annual report, October 1, 1977--September 30, 1978

    International Nuclear Information System (INIS)

    Anderson, D.R.; Bean, R.M.; Gibson, C.I.

    1979-01-01

    The Biocide By-Products in Aquatic Environments Program is composed of analytical chemistry and biological phases with freshwater and marine biological subdivisions. The objectives of the analytical studies are: to identify those chloroorganic chemical compounds that result from the addition of chlorine to fresh or saltwater; to develop methods for detecting chlorinated organics in the effluents discharged to receiving water bodies from nuclear stations; and to verify laboratory findings through analysis for chlorination by-products in water and biota samples from cooling water bodies of nuclear power stations. The objectives of the biological studies are: to investigate the immediate toxicity of specific chlorination by-products (chloroform in freshwater and bromoform in marine waters); to evaluate the chronic toxicity of chlorination by-products; to follow their pathways of action; and to analyze for bioaccumulation or biomagnification of halogenated hydrocarbons on selected aquatic or marine biota

  19. SU-F-J-06: Optimized Patient Inclusion for NaF PET Response-Based Biopsies

    Energy Technology Data Exchange (ETDEWEB)

    Roth, A; Harmon, S; Perk, T; Jeraj, R [University of Wisconsin, Madison, WI (United States)

    2016-06-15

    Purpose: A method to guide mid-treatment biopsies using quantitative [F-18]NaF PET/CT response is being investigated in a clinical trial. This study aims to develop methodology to identify patients amenable to mid-treatment biopsy based on pre-treatment imaging characteristics. Methods: 35 metastatic prostate cancer patients had NaF PET/CT scans taken prior to the start of treatment and 9–12 weeks into treatment. For mid-treatment biopsy targeting, lesions must be at least 1.5 cm{sup 3} and located in a clinically feasible region (lumbar/sacral spine, pelvis, humerus, or femur). Three methods were developed based on number of lesions present prior to treatment: a feasibility-restricted method, a location-restricted method, and an unrestricted method. The feasibility restricted method only utilizes information from lesions meeting biopsy requirements in the pre-treatment scan. The unrestricted method accounts for all lesions present in the pre-treatment scan. For each method, optimized classification cutoffs for candidate patients were determined. Results: 13 of the 35 patients had enough lesions at the mid-treatment for biopsy candidacy. Of 1749 lesions identified in all 35 patients at mid-treatment, only 9.8% were amenable to biopsy. Optimizing the feasibility-restricted method required 4 lesions at pre-treatment meeting volume and region requirements for biopsy, resulting patient identification sensitivity of 0.8 and specificity of 0.7. Of 6 false positive patients, only one patient lacked lesions for biopsy. Restricting for location alone showed poor results (sensitivity 0.2 and specificity 0.3). The optimized unrestricted method required patients have at least 37 lesions in pretreatment scan, resulting in a sensitivity of 0.8 and specificity of 0.8. There were 5 false positives, only one lacked lesions for biopsy. Conclusion: Incorporating the overall pre-treatment number of NaF PET/CT identified lesions provided best prediction for identifying candidate

  20. SU-F-J-06: Optimized Patient Inclusion for NaF PET Response-Based Biopsies

    International Nuclear Information System (INIS)

    Roth, A; Harmon, S; Perk, T; Jeraj, R

    2016-01-01

    Purpose: A method to guide mid-treatment biopsies using quantitative [F-18]NaF PET/CT response is being investigated in a clinical trial. This study aims to develop methodology to identify patients amenable to mid-treatment biopsy based on pre-treatment imaging characteristics. Methods: 35 metastatic prostate cancer patients had NaF PET/CT scans taken prior to the start of treatment and 9–12 weeks into treatment. For mid-treatment biopsy targeting, lesions must be at least 1.5 cm 3 and located in a clinically feasible region (lumbar/sacral spine, pelvis, humerus, or femur). Three methods were developed based on number of lesions present prior to treatment: a feasibility-restricted method, a location-restricted method, and an unrestricted method. The feasibility restricted method only utilizes information from lesions meeting biopsy requirements in the pre-treatment scan. The unrestricted method accounts for all lesions present in the pre-treatment scan. For each method, optimized classification cutoffs for candidate patients were determined. Results: 13 of the 35 patients had enough lesions at the mid-treatment for biopsy candidacy. Of 1749 lesions identified in all 35 patients at mid-treatment, only 9.8% were amenable to biopsy. Optimizing the feasibility-restricted method required 4 lesions at pre-treatment meeting volume and region requirements for biopsy, resulting patient identification sensitivity of 0.8 and specificity of 0.7. Of 6 false positive patients, only one patient lacked lesions for biopsy. Restricting for location alone showed poor results (sensitivity 0.2 and specificity 0.3). The optimized unrestricted method required patients have at least 37 lesions in pretreatment scan, resulting in a sensitivity of 0.8 and specificity of 0.8. There were 5 false positives, only one lacked lesions for biopsy. Conclusion: Incorporating the overall pre-treatment number of NaF PET/CT identified lesions provided best prediction for identifying candidate patients

  1. Effect of topical application of fluoride gel NaF 2% on enzymatic and non-enzymatic antioxidant parameters of saliva.

    Science.gov (United States)

    Leite, Mariana Ferreira; Ferreira, Nayara Ferraz D'Assumpção; Shitsuka, Caleb David Willy Moreira; Lima, Amanda Martins; Masuyama, Mônica Miyuki; Sant'Anna, Giselle Rodrigues; Yamaguti, Paula Mochidome; Polotow, Tatiana G; de Barros, Marcelo Paes

    2012-06-01

    The aim of the study was to evaluate the effect of topical fluoride gel NaF 2% application on antioxidant parameters of whole saliva from children. The saliva mechanically stimulated with parafilm was collected from 25 children (6-12 years) attending the Clinic of Paediatric Dentistry of Universidade Cruzeiro do Sul, São Paulo, Brazil, before (control group) and immediately after application of neutral fluoride gel NaF 2% (fluoride-gel group), according to the Standards for Research Using Human Subjects, Resolution 196/96 of the USA National Health Council of 10/10/1996. Afterwards, pre-post ferric-reducing antioxidant power (FRAP), trolox-equivalent antioxidant capacity (TEAC), uric acid, reduced/oxidised glutathione content (GSH/GSSG) and total peroxidase activity (TPO) were evaluated in whole saliva of both groups. All non-enzymatic antioxidant parameters were augmented by fluoride-gel NaF 2% application, whereas a notable reduction (31%) of peroxidase activity was concomitantly observed in the children's saliva (p ≤ 0.05). Nevertheless, the reducing power of saliva was kept unaltered under these circumstances (p ≤ 0.05). Despite the reduced activity of peroxidase (an important antimicrobial and antioxidant enzyme), the topical fluoride gel NaF 2% favourably stimulated the release of non-enzymatic antioxidant components of saliva, sustaining the reducing power of saliva and the natural defences of the oral cavity. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Prototype Tests for the Recovery and Conversion of UF6 Chemisorbed in NaF Traps for the Molten Salt Reactor Remediation Project

    International Nuclear Information System (INIS)

    Del Cul, G.D.; Icenhour, A.S.; Simmons, D.W.

    2000-01-01

    The remediation of the Molten Salt Reactor Experiment (MSRE) site includes the removal of about 37 kg of uranium. Of that inventory, about 23 kg have already been removed from the piping system and chemisorbed in 25 NaF traps. This material is being stored in Building 3019. The planned recovery of -11 kg of uranium from the fuel salt will generate another 15 to 19 NaF traps. The remaining 2 to 3 kg of uranium are present in activated charcoal beds, which are also scheduled to be removed from the reactor site. Since all of these materials (NaF traps and the uranium-laden charcoal) are not suitable for long-term storage, they will be converted to a chemical form (uranium oxide), which is suitable for long-term storage. This document describes the process that will be used to recover and convert the uranium in the NaF traps into a stable oxide for long-term storage. Included are a description of the process, equipment, test results, and lessons learned. The process was developed for remote operation in a hot cell. Lessons learned from the prototype testing were incorporated into the process design

  3. Prototype Tests for the Recovery and Conversion of UF6 Chemisorbed in NaF Traps for the Molten Salt Reactor Remediation Project

    Energy Technology Data Exchange (ETDEWEB)

    Del Cul, G.D.; Icenhour, A.S.; Simmons, D.W.

    2000-04-01

    The remediation of the Molten Salt Reactor Experiment (MSRE) site includes the removal of about 37 kg of uranium. Of that inventory, about 23 kg have already been removed from the piping system and chemisorbed in 25 NaF traps. This material is being stored in Building 3019. The planned recovery of -11 kg of uranium from the fuel salt will generate another 15 to 19 NaF traps. The remaining 2 to 3 kg of uranium are present in activated charcoal beds, which are also scheduled to be removed from the reactor site. Since all of these materials (NaF traps and the uranium-laden charcoal) are not suitable for long-term storage, they will be converted to a chemical form [uranium oxide], which is suitable for long-term storage. This document describes the process that will be used to recover and convert the uranium in the NaF traps into a stable oxide for long-term storage. Included are a description of the process, equipment, test results, and lessons learned. The process was developed for remote operation in a hot cell. Lessons learned from the prototype testing were incorporated into the process design.

  4. Prototype Tests for the Recovery and Conversion of UF6Chemisorbed in NaF Traps for the Molten Salt Reactor Remediation Project

    Energy Technology Data Exchange (ETDEWEB)

    Del Cul, G.D.

    2000-06-07

    The remediation of the Molten Salt Reactor Experiment (MSRE) site includes the removal of about 37 kg of uranium. Of that inventory, about 23 kg have already been removed from the piping system and chemisorbed in 25 NaF traps. This material is being stored in Building 3019. The planned recovery of {approx}11 kg of uranium from the fuel salt will generate another 15 to 19 NaF traps. The remaining 2 to 3 kg of uranium are present in activated charcoal beds, which are also scheduled to be removed from the reactor site. Since all of these materials (NaF traps and the uranium-laden charcoal) are not suitable for long-term storage, they will be converted to a chemical form [uranium oxide (U{sub 3}O{sub 8})], which is suitable for long-term storage. This document describes the process that will be used to recover and convert the uranium in the NaF traps into a stable oxide for long-term storage. Included are a description of the process, equipment, test results, and lessons learned. The process was developed for remote operation in a hot cell. Lessons learned from the prototype testing were incorporated into the process design.

  5. Preliminary Interpretations of Multi-Channel Seismic Reflection and Magnetic Data on North Anatolian Fault (NAF) in the Eastern Marmara Region, Turkey

    Science.gov (United States)

    Gözde Okut Toksoy, Nigar; Kurt, Hülya; İşseven, Turgay

    2017-04-01

    The North Anatolian Fault (NAF) is 1600 km long, right lateral strike-slip fault nearly E-W elongated between Karlıova in the east and Saros Gulf in the west. NAF splays into two major strands near the west of Bolu city as Northern and Southern strands. Northern strand passes Sapanca Lake and extends towards west and reaches Marmara Sea through the Gulf of Izmit. The area has high seismicity; 1999 Kocaeli (Mw=7.4) and 1999 Düzce (Mw=7.2) earthquakes caused approximately 150 km long surface rupture between the Gulf of Izmit and Bolu. The rupture has four distinct fault segments as Gölcük, Sapanca, Sakarya, and Karadere from west to east. In this study multi-channel seismic and magnetic data are collected for the first time on the Sapanca Segment to investigate the surficial and deeper geometry of the NAF. Previously, the NAF in the eastern Marmara region is investigated using by paleo-seismological data from trenches on the surface rupture of fault or the geomorphological data (Lettis et al., 2000; Dikbaş and Akyüz, 2010) which have shallower depth targets. Crustal structure and seismic velocities for Central Anatolia and eastern Marmara regions are obtained from deeper targeted refraction data (Gürbüz et al., 1992). However, their velocity models do not have the spatial resolution to determine details of the fault zone structure. Multi-channel seismic and magnetic data in this study were acquired on two N-S directed profiles crossing NAF perpendicularly near Kartepe on the western part of the Sapanca Lake in October 2016. The receiver interval is 5 m, shot interval is 5-10 m, and the total length of the profiles are approximately 1400 m. Buffalo Gun is used as a seismic source for deeper penetration. Conventional seismic reflection processing steps are applied to the data. These are geometry definition, editing, filtering, static correction, velocity analysis and deconvolution, stacking and migration. Echos seismic software package in Geophysical Department

  6. Levels of infection and colonization of some oral bacteria after use of naf, chlorhexidine and a combined chlorhexidine with naf mouthrinses Níveis de infecção e colonização de algumas bactérias orais após o uso de soluções de fluoreto de sódio, clorexidina e de uma combinação de fluoreto de sódio e clorexidina

    Directory of Open Access Journals (Sweden)

    Kenio Costa Lima

    2001-06-01

    Full Text Available This study was carried out to evaluate levels of infection of bacteria involved in caries and oral streptococci and their colonization after use of mouthrinses with NaF, chlorhexidine and chlorhexidine plus NaF. Combination of chlorhexidine and fluoride was the only agent that reduced levels of Streptococcus mutans (group for 30 days.O objetivo deste estudo foi avaliar os níveis de infecção de bactérias cariogênicas e estreptococos orais e sua colonização após uso de bochechos com NaF, clorexidina e clorexidina e NaF associados. Associação de clorexidina e NaF foi o único agente que reduziu os níveis de Streptococcus mutans (grupo por 30 dias.

  7. Irradiated fuel by-product separation research in Canada

    International Nuclear Information System (INIS)

    Burston, M.

    1984-01-01

    Although no decision has been made to reprocess irradiated CANDU fuel, by-product separation research has recently been initiated in Canada because of its potential importance to Canadian research programs in advanced fuel cycles (especially U/Pu cycle development in the near term) and nuclear waste management. In addition, separated by-products could have a significant commercial potential. Demonstrated applications include: heat sources, gamma radiation sources, light sources, new materials for productions of other useful isotopes, etc. For illustrative purposes the calculated market value of by-products currently stored in irradiated CANDU fuel is approximately $210/kgU. Ontario Hydro has initiated a program to study the application of new separation technolgies, such as laser-based techniques and the plasma ion cyclotron resonance separation technique, to either augment and/or supplant the chemical extraction methods. The main goal is to develop new, more economical extraction methods in order to increase the magnitude of the advantages resulting from this approach to reprocessing. (author)

  8. Quasielastic neutron scattering measurements and ab initio MD-simulations on single ion motions in molten NaF

    Energy Technology Data Exchange (ETDEWEB)

    Demmel, F. [ISIS Facility, Rutherford Appleton Laboratory, Didcot OX11 0QX (United Kingdom); Mukhopadhyay, S. [ISIS Facility, Rutherford Appleton Laboratory, Didcot OX11 0QX (United Kingdom); Department of Materials, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom)

    2016-01-07

    The ionic stochastic motions in the molten alkali halide NaF are investigated by quasielastic neutron scattering and first principles molecular dynamics simulation. Quasielastic neutron scattering was employed to extract the diffusion behavior of the sodium ions in the melt. An extensive first principles based simulation on a box of up to 512 particles has been performed to complement the experimental data. From that large box, a smaller 64-particle box has then been simulated over a runtime of 60 ps. A good agreement between calculated and neutron data on the level of spectral shape has been obtained. The obtained sodium diffusion coefficients agree very well. The simulation predicts a fluorine diffusion coefficient similar to the sodium one. Applying the Nernst-Einstein equation, a remarkable large cross correlation between both ions can be deduced. The velocity cross correlations demonstrate a positive correlation between the ions over a period of 0.1 ps. That strong correlation is evidence that the unlike ions do not move completely statistically independent and have a strong association over a short period of time.

  9. Ultrasonic measurements at elevated pressures (9 GPa) to determine Poisson's ratio and other elastic moduli of NaCl and NaF

    International Nuclear Information System (INIS)

    Morris, C.E.; Jamieson, J.C.; Yarger, F.L.

    1976-01-01

    Transit times of longitudinal and transverse ultrasonic waves were measured simultaneously in NaCl and NaF as a function of ''quasihydrostatic'' pressure to 9 GPa. The dimensionless ratio of these transit times yields directly the ratio of the longitudinal to shear velocity. This velocity ratio is independent of sample length. Using third-order elasticity theory a correction for a probable superimposed uniaxial stress component may be made. When done, this allows the direct determination of Poisson's ratio for each pressure. Shock-wave data are used to obtain other elastic moduli and velocities of shear and longitudinal waves. Apparatus for making these measurements is described and data for NaCl and NaF are presented

  10. Anaerobic digestion of slaughterhouse by-products

    DEFF Research Database (Denmark)

    Hejnfelt, Anette; Angelidaki, Irini

    2009-01-01

    Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 degrees C and for some experiments also at 37 degrees C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone...... flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497,487, 561, 582, 575, 359, 619 dm(3) kg(-1) respectively, corresponding to 50-100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions...... giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm(-3) and 7 gN dm(-3) respectively. Pretreatment (pasteurization: 70 degrees C, sterilization: 133 degrees C, and alkali...

  11. Effect of 0.02% NaF solution on enamel demineralization and fluoride uptake by deciduous teeth in vitro Efeito da solução de NaF a 0,02% na desmineralização e incorporação de fluoreto pelo esmalte de dentes decíduos in vitro

    Directory of Open Access Journals (Sweden)

    Silvia José Chedid

    2004-03-01

    Full Text Available The application of 0.02% NaF solution on teeth with a cotton swab instead of brushing with fluoride dentifrice has been suggested for young children to reduce the risk of dental fluorosis, but its anticariogenic effect has not been evaluated. Thus, we studied the in vitro effect of 0.02% NaF solution on enamel demineralization and fluoride uptake in deciduous teeth; non-fluoride dentifrice and fluoride dentifrice (1,100 mg F/g were used, respectively, as negative and positive controls. The treatment with fluoride dentifrice was more effective in reducing enamel demineralization (p A aplicação da solução de NaF a 0,02%, no lugar de dentifrício fluoretado, tem sido sugerida para ser aplicada com cotonete nos dentes de bebês para reduzir o risco de fluorose dental. Como o efeito anticariogênico dessa recomendação não tem sido estudado, avaliou-se in vitro seu efeito na redução da desmineralização e incorporação de fluoreto no esmalte de dentes decíduos; dentifrício não fluoretado e fluoretado (1.100 mg F/g foram utilizados como controles negativo e positivo, respectivamente. O dentifrício fluoretado foi mais efetivo que a solução de NaF a 0,02% na redução de desmineralização e na incorporação de fluoreto no esmalte (p < 0,05. Os dados sugerem que uso alternativo de NaF a 0,02% ao invés de dentifrício fluoretado para reduzir o risco de fluorose dental deve ser reavaliado, especialmente se a cárie dental precisa ser controlada.

  12. Anaerobic digestion of slaughterhouse by-products

    International Nuclear Information System (INIS)

    Hejnfelt, Anette; Angelidaki, Irini

    2009-01-01

    Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 o C and for some experiments also at 37 o C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm 3 kg -1 respectively, corresponding to 50-100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm -3 and 7 g N dm -3 respectively. Pretreatment (pasteurization: 70 o C, sterilization: 133 o C, and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 o C showed 40% higher methane production compared to digestion of manure alone.

  13. Anaerobic digestion of slaughterhouse by-products

    Energy Technology Data Exchange (ETDEWEB)

    Hejnfelt, Anette; Angelidaki, Irini [Department of Environmental Engineering, Technical University of Denmark, DTU, Building 113, DK-2800 Kgs. Lyngby (Denmark)

    2009-08-15

    Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 C and for some experiments also at 37 C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm{sup 3} kg{sup -1} respectively, corresponding to 50-100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm{sup -3} and 7 g N dm{sup -3} respectively. Pretreatment (pasteurization: 70 C, sterilization: 133 C), and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 C showed 40% higher methane production compared to digestion of manure alone. (author)

  14. Thermal analysis and phase diagrams of the LiF BiF3 e NaF BiF3 systems

    International Nuclear Information System (INIS)

    Nakamura, Gerson Hiroshi de Godoy

    2013-01-01

    Investigations of the binary systems LiF-BiF 3 and NaF-BiF 3 were performed with the objective of clarifying the thermal behavior and phase equilibria of these systems and their intermediary phases, an important requisite for high-quality crystal growth. Several samples in the entire range of compositions (0 to 100 mol% BiF 3 ) of both systems were subjected to experiments of differential thermal analysis (DTA) and thermogravimetry (TG), and also of differential scanning calorimetry (DSC). A few specific compositions were selected for X-ray diffraction to supplement the experimental data. Due to the high vulnerability of BiF 3 to oxygen contamination, its volatility and propensity to destroy metal parts upon heating, it was necessary to determine the optimal conditions for thermal analysis before investigating the systems themselves. Phase relations in the system LiF-BiF 3 were completely clarified and a phase diagram was calculated and evaluated via the commercial software Factsage. The diagram itself consists in a simple peritectic system in which the only intermediary compound, LiBiF 4 , decomposes into LiF and a liquid phase. The NaF-BiF 3 system could not be completely elucidated and the phase relations in the NaF poor side (> 50% BiF 3 ) are still unknown. In the NaF rich side, however, the possible peritectoid decomposition of the compound NaBiF 4 was identified. In both systems X-ray diffraction yielded crystal structures discrepant with the literature for the intermediary phases, LiBiF 4 , NaBiF 4 and a solid solution of NaF and BiF 3 called I. The observed structures remain unknown and explanations for the discrepancies were proposed. (author)

  15. Five ab initio potential energy and dipole moment surfaces for hydrated NaCl and NaF. I. Two-body interactions

    International Nuclear Information System (INIS)

    Wang, Yimin; Bowman, Joel M.; Kamarchik, Eugene

    2016-01-01

    We report full-dimensional, ab initio-based potentials and dipole moment surfaces for NaCl, NaF, Na + H 2 O, F − H 2 O, and Cl − H 2 O. The NaCl and NaF potentials are diabatic ones that dissociate to ions. These are obtained using spline fits to CCSD(T)/aug-cc-pV5Z energies. In addition, non-linear least square fits using the Born-Mayer-Huggins potential are presented, providing accurate parameters based strictly on the current ab initio energies. The long-range behavior of the NaCl and NaF potentials is shown to go, as expected, accurately to the point-charge Coulomb interaction. The three ion-H 2 O potentials are permutationally invariant fits to roughly 20 000 coupled cluster CCSD(T) energies (awCVTZ basis for Na + and aVTZ basis for Cl − and F − ), over a large range of distances and H 2 O intramolecular configurations. These potentials are switched accurately in the long range to the analytical ion-dipole interactions, to improve computational efficiency. Dipole moment surfaces are fits to MP2 data; for the ion-ion cases, these are well described in the intermediate- and long-range by the simple point-charge expression. The performance of these new fits is examined by direct comparison to additional ab initio energies and dipole moments along various cuts. Equilibrium structures, harmonic frequencies, and electronic dissociation energies are also reported and compared to direct ab initio results. These indicate the high fidelity of the new PESs.

  16. Five ab initio potential energy and dipole moment surfaces for hydrated NaCl and NaF. I. Two-body interactions

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yimin, E-mail: yimin.wang@emory.edu; Bowman, Joel M., E-mail: jmbowma@emory.edu [Department of Chemistry, Cherry L. Emerson Center for Scientific Computation, Emory University, Atlanta, Georgia 30322 (United States); Kamarchik, Eugene, E-mail: eugene.kamarchik@gmail.com [Quantum Pomegranate, LLC, 2604 Kings Lake Court NE, Atlanta, Georgia 30345 (United States)

    2016-03-21

    We report full-dimensional, ab initio-based potentials and dipole moment surfaces for NaCl, NaF, Na{sup +}H{sub 2}O, F{sup −}H{sub 2}O, and Cl{sup −}H{sub 2}O. The NaCl and NaF potentials are diabatic ones that dissociate to ions. These are obtained using spline fits to CCSD(T)/aug-cc-pV5Z energies. In addition, non-linear least square fits using the Born-Mayer-Huggins potential are presented, providing accurate parameters based strictly on the current ab initio energies. The long-range behavior of the NaCl and NaF potentials is shown to go, as expected, accurately to the point-charge Coulomb interaction. The three ion-H{sub 2}O potentials are permutationally invariant fits to roughly 20 000 coupled cluster CCSD(T) energies (awCVTZ basis for Na{sup +} and aVTZ basis for Cl{sup −} and F{sup −}), over a large range of distances and H{sub 2}O intramolecular configurations. These potentials are switched accurately in the long range to the analytical ion-dipole interactions, to improve computational efficiency. Dipole moment surfaces are fits to MP2 data; for the ion-ion cases, these are well described in the intermediate- and long-range by the simple point-charge expression. The performance of these new fits is examined by direct comparison to additional ab initio energies and dipole moments along various cuts. Equilibrium structures, harmonic frequencies, and electronic dissociation energies are also reported and compared to direct ab initio results. These indicate the high fidelity of the new PESs.

  17. A comparison of intraoral antimicrobial effects of stabilized stannous fluoride dentifrice, baking soda/peroxide dentifrice, conventional NaF dentifrice and essential oil mouthrinse.

    Science.gov (United States)

    Bacca, L A; Leusch, M; Lanzalaco, A C; Macksood, D; Bouwsma, O J; Shaffer, J B; Howard-Nordan, K S; Knippenberg, S H; Kreutzjans, M K; Miller, J M; Poore, C L; Sunberg, R J; Vastola, K A; Becus, M; Bartizek, R D; Block, R P; Briner, W W; White, D J

    1997-01-01

    The intraoral antimicrobial activity of four commercial oral products-conventional NaF dentifrice (Crest), baking soda/peroxide/NaF dentifrice (Mentadent), essential oil mouthrinse (Listerine) and SnF2 dentifrice (Crest Plus Gum Care)-have been compared in three test regimens. Formulations were compared for their ability to suppress the regrowth and apical extension of dental plaque following toothbrushing during thirty hours of non-brushing where products were used as oral rinses (30-hour plaque regrowth model). Formulations were also compared for their ability to suppress the colony-forming units (cfu) of facultative anaerobic bacteria sampled from buccal gingival surfaces following use (Gingival Surface Microbial Index-GSMI model). Lastly, formulations were compared for effects in suppressing the glycolytic metabolic activity and regrowth activity of in vivo-treated dental plaques sampled at various periods following topical use and incubated under controlled ex vivo conditions (Plaque Glycolysis and Regrowth-PGRM model). In thirty-hour plaque regrowth testing, the rank ordered antimicrobial efficacy of formulations followed SnF2 > essential oils > NaF = water = baking soda/peroxide. In GSMI testing, all formulations were shown to suppress the cfu of facultative anaerobic bacteria relative to baseline, although SnF2 treatment was observed to reduce bacterial levels to a significantly greater degree than NaF dentifrice or baking soda/peroxide dentifrice up to two hours following brushing. In PGRM testing, the SnF2 dentifrice provided significant inhibition of bacterial metabolism and regrowth following topical application when compared with the NaF dentifrice as control. The baking soda/peroxide dentifrice provided no reduction in either bacterial metabolism or regrowth in PGRM. Previous studies had demonstrated modest effects for essential oil rinse in reducing PGRM plaque regrowth, with no effects for this treatment on plaque metabolism. Overall, these results

  18. TU-AB-BRA-05: Repeatability of [F-18]-NaF PET Imaging Biomarkers for Bone Lesions: A Multicenter Study

    International Nuclear Information System (INIS)

    Lin, C; Bradshaw, T; Perk, T; Harmon, S; Jeraj, R; Liu, G

    2015-01-01

    Purpose: Quantifying the repeatability of imaging biomarkers is critical for assessing therapeutic response. While therapeutic efficacy has been traditionally quantified by SUV metrics, imaging texture features have shown potential for use as quantitative biomarkers. In this study we evaluated the repeatability of quantitative "1"8F-NaF PET-derived SUV metrics and texture features in bone lesions from patients in a multicenter study. Methods: Twenty-nine metastatic castrate-resistant prostate cancer patients received whole-body test-retest NaF PET/CT scans from one of three harmonized imaging centers. Bone lesions of volume greater than 1.5 cm"3 were identified and automatically segmented using a SUV>15 threshold. From each lesion, 55 NaF PET-derived texture features (including first-order, co-occurrence, grey-level run-length, neighbor gray-level, and neighbor gray-tone difference matrix) were extracted. The test-retest repeatability of each SUV metric and texture feature was assessed with Bland-Altman analysis. Results: A total of 315 bone lesions were evaluated. Of the traditional SUV metrics, the repeatability coefficient (RC) was 12.6 SUV for SUVmax, 2.5 SUV for SUVmean, and 4.3 cm"3 for volume. Their respective intralesion coefficients of variation (COVs) were 12%, 17%, and 6%. Of the texture features, COV was lowest for entropy (0.03%) and highest for kurtosis (105%). Lesion intraclass correlation coefficient (ICC) was lowest for maximum correlation coefficient (ICC=0.848), and highest for entropy (ICC=0.985). Across imaging centers, repeatability of texture features and SUV varied. For example, across imaging centers, COV for SUVmax ranged between 11–23%. Conclusion: Many NaF PET-derived SUV metrics and texture features for bone lesions demonstrated high repeatability, such as SUVmax, entropy, and volume. Several imaging texture features demonstrated poor repeatability, such as SUVtotal and SUVstd. These results can be used to establish response criteria

  19. Anaerobic effluent disinfection using ozone: Byproducts formation

    NARCIS (Netherlands)

    Silva, G.H.R.; Daniel, L.A.; Bruning, H.; Rulkens, W.H.

    2010-01-01

    This research was aimed at studying oxidation processes, coliform inactivation effectiveness and disinfection byproducts (DBPs) associated with the disinfection of anaerobic sanitary wastewater effluent with ozone applied at doses of 5.0, 8.0 and 10.0mg O(3)L(-1) for contact times of 5, 10 and 15

  20. Chlorine by-products in sea water at the Penly nuclear power plant. Measurement survey in May 1993; Residus de chloration en mer a Penly. Campagne de mesures de Mai 1993

    Energy Technology Data Exchange (ETDEWEB)

    Khalanski, M.; Delesmont, R.

    1994-09-01

    The objective of the measurement survey conducted at the Penly nuclear power plant on May 27 and 28, 1993, was to determine the distribution of residual oxidants and volatile organo-halogenated compounds (THM) concentrations in the discharge plume when both units of the plants are carrying out chlorination. The data collected provide a mapping of the chemical types analyzed and will serve in calibration of a numerical model to simulate the evolution of these compounds in the discharge plume. During the two days of measurements, quantitative analyses were performed on samples taken by helicopter, once at high tide and twice at low tide with mean tidal coefficients. The chlorine injection level ranged from 0.84 to 0.92 mg/l (ppm) in unit 1 and from 0.64 to 0.70 mg/l in unit 2. Residual oxidants were measured as Total Chlorine equivalents using the colorimetric DPD method. Bromoform accounted for 97.8 % of the THM generated by chlorination. Three minutes after injection of hypochlorite, in the discharge basin, bromoform reached 60 % of its maximum concentration (29.23 {mu}g/l). The maximum reaction yield of bromoform formation is 2,9 %. Three zones were defined according to their proximity to releases. In each zone, given the lake of precision in measurements, the concentration of residual oxidants found did not reach significant levels ({<=}0.03 mg/l). The bromoform concentration, on the contrary, reached measurable levels in each of the samples. Its distribution differs significantly from one zone to another: -release zone : 1.66{+-}0.40{mu}g/l -nearby zone: 0.44{+-}0.13{mu}g/l - distant zone : 0.26{+-}0.10{mu}g/l. Our analysis, which indicates a background level of the order of 0.1 {mu}g/l for the entire studied area, raises the question of possible other sources of bromoform, independent of discharge from Penly. (authors). 15 refs., 11 figs., 5 tabs., 4 annexes.

  1. Studies on Disinfection By-Products and Drinking Water

    Science.gov (United States)

    Rostad, Colleen E.

    2007-01-01

    Drinking water is disinfected with chemicals to remove pathogens, such as Giardia and Cryptosproridium, and prevent waterborne diseases such as cholera and typhoid. During disinfection, by-products are formed at trace concentrations. Because some of these by-products are suspected carcinogens, drinking water utilities must maintain the effectiveness of the disinfection process while minimizing the formation of by-products.

  2. Biological Treatment of Water Disinfection Byproducts using ...

    Science.gov (United States)

    Major disinfection by-products (DBPs) from the chlorination process of drinking water include trihalomethanes (THMs) and haloacetic acides (HAA5). THMs mainly consist of chloroform, and other harsh chemicals. Prolonged consumptions of drinking water containing high levels of THMs has been linked with diseases of the liver, kidneys, bladder, or central nervous system and may increase likelihood of cancer. A risk also exists for THMs exposure via inhalation while showering, bathing or washing clothes and dishes. Due to these risks, the U.S. EPA regulate THMs content in drinking water. This research investigates biological degradation of THM using chloroform as a model compound. The study aims to decrease possible risks of THMs through filtration. Throughout this year’s presentations, there is a common theme of health and safety concerns. UC researchers are working hard to clean water ways of naturally occurring contaminates as well as man-made toxins found in our waterways. The significance of these presentations translates into the promise of safer environments, and more importantly saved lives, as UC’s faculty continues to produce real-world solutions to problems threatening the world around us. A biotech process has been developed and demonstrated that effectively remove and treat volatile disinfection by-products from drinking water. The process strips low concentration disinfection by-products, such as trihalomethanes, that are formed during the chlori

  3. Nuclear

    International Nuclear Information System (INIS)

    2014-01-01

    This document proposes a presentation and discussion of the main notions, issues, principles, or characteristics related to nuclear energy: radioactivity (presence in the environment, explanation, measurement, periods and activities, low doses, applications), fuel cycle (front end, mining and ore concentration, refining and conversion, fuel fabrication, in the reactor, back end with reprocessing and recycling, transport), the future of the thorium-based fuel cycle (motivations, benefits and drawbacks), nuclear reactors (principles of fission reactors, reactor types, PWR reactors, BWR, heavy-water reactor, high temperature reactor of HTR, future reactors), nuclear wastes (classification, packaging and storage, legal aspects, vitrification, choice of a deep storage option, quantities and costs, foreign practices), radioactive releases of nuclear installations (main released radio-elements, radioactive releases by nuclear reactors and by La Hague plant, gaseous and liquid effluents, impact of releases, regulation), the OSPAR Convention, management and safety of nuclear activities (from control to quality insurance, to quality management and to sustainable development), national safety bodies (mission, means, organisation and activities of ASN, IRSN, HCTISN), international bodies, nuclear and medicine (applications of radioactivity, medical imagery, radiotherapy, doses in nuclear medicine, implementation, the accident in Epinal), nuclear and R and D (past R and D programmes and expenses, main actors in France and present funding, main R and D axis, international cooperation)

  4. 10 CFR 32.26 - Gas and aerosol detectors containing byproduct material: Requirements for license to manufacture...

    Science.gov (United States)

    2010-01-01

    ...: Requirements for license to manufacture, process, produce, or initially transfer. 32.26 Section 32.26 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS... byproduct material: Requirements for license to manufacture, process, produce, or initially transfer. An...

  5. Measurement of surface phonon dispersion relations for LiF, NaF, and KCl through energy-analysed inelastic scattering of a helium atomic beam

    International Nuclear Information System (INIS)

    Doak, R.B.

    1981-01-01

    A crystal surface terminates abruptly one dimension of lattice periodicity, constituting a lattice defect with concomitant localized modes of vibration, termed surface phonons. Such surface phonons have previously been investigated in the long wavelength, non-dispersive regime. The present work reports the first observation of surface phonons in the short wavelength, dispersive range. The data allow for the first time a surface phonon dispersion curve to be plotted completely from origin to edge of the surface Brillouin zone. Measurements were made of phonons along the (anti GAMMA anti M) and (anti GAMMA anti X) azimuths of the LiF(001) surface and along the azimuth of NaF(001) and KC1(001) surfaces. The results are in substantial agreement with theoretical predictions, although for LiF the measured Rayleigh dispersion curve at M lies appreciably below the theoretical value, possibly reflecting the effects of surface relaxation. (orig.)

  6. Biochemical investigations of the effect of NaF on mammalian cells. 2. Influence on biosynthesis of nucleic acids and proteins in mouse spleen cells ''in vivo''

    Energy Technology Data Exchange (ETDEWEB)

    Klein, W; Kocsis, F; Altmann, H

    1974-10-01

    The influence of NaF on the biosynthesis of nucleic acids and proteins was studied ''in vivo'' with ''Swiss mice''. Using a fluoride concentration of 0.4 ..mu..g/g no effect on DNA-repair appeared within 12 weeks, while DNA-, RNA- and protein-synthesis were suppressed after 10 weeks. Fluoride in a concentration of 3.5 ..mu..g/g gives a nearly complete inhibition of DNA-repair after 10 weeks, while DNA-, RNA- and protein-synthesis were suppressed to various degrees from week 2 until week 12. The phosphorylation of DNA- and RNA-precursors indicated results comparable to both synthesis, but investigating the particular kinase-steps of the phosphorylation, no specific effect on one of them can be localized significantly. (auth)

  7. Correlation between the thermoluminescence and the F centre thermal stability in KBr, KI, NaCl and NaF irradiated at room temperature

    International Nuclear Information System (INIS)

    Mariani, D. F.

    1977-01-01

    Over the years several models have been proposed to explain the thermoluminescence in irradiated alkali halides. To verify these models, the thermoluminescence and the thermal stability of the F centres in KBr, K l, NaCl and NaF single crystals irradiated at room temperature with x or gamma rays have been studied. It has been concluded that both phenomena, the thermoluminescence and the F centre thermal stability are two different aspects of the same basic phenomenon, i.e. the recombination of mobile interstitials thermally released from traps with F centres (Ausin V. and Alvarez Rivas J.L. 1972). It has been found in some cases, that the H centres also play the role of recombination centres for interstitials. (Author) 42 refs

  8. The investigation of the fluorine uptake in tooth enamel after the application of a NaF containing varnish

    Science.gov (United States)

    Plier, F.; Zschau, H. E.; Otto, G.

    1992-03-01

    The 935 keV resonance of the 19F( p, p' γ) 19F nuclear reaction was used to determine flourine depth profiles in human tooth enamel for three separate cases. These investigations allowed conclusions to be drawn about the interaction processes between the oral milieu containing fluorine, and the enamel surface.

  9. A study on the safety regulation of byproduct material (II)

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jong Sun; Song, Yang Su [Chosun Univ., Gwangju (Korea, Republic of)

    2000-03-15

    The scope of this study consists of : in relating to the domestic license of byproduct material, a survey of technical criteria and status of regulation in U.S.A., a determination of range of application and contents of byproduct material, a tentative suggestion of related technical criteria and regulatory system. A study was performed about the above topics to establish the safe regulation of byproduct material institutionally, and this can be contributed in establishing the proper domestic technical criteria related.

  10. By-product mutualism with evolving common enemies

    NARCIS (Netherlands)

    De Jaegher, K.J.M.

    2017-01-01

    The common-enemy hypothesis of by-product mutualism states that organisms cooperate when it is in their individual interests to do so, with benefits for other organisms arising as a by-product; in particular, such cooperation is hypothesized to arise when organisms face the common enemy of a

  11. CONSIDERATIONS IN UTILIZING BY-PRODUCT CARBOHYDRATES IN RUMINANT NUTRITION

    Science.gov (United States)

    By-product feeds provide a variety of carbohydrates that can vary greatly in their content, digestibility, and physical effects. Variation in the composition and quality of by-product feeds needs to be evaluated to assess whether the variation poses an acceptable risk for inclusion of small or larg...

  12. Nuclear

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    The first text deals with a new circular concerning the collect of the medicine radioactive wastes, containing radium. This campaign wants to incite people to let go their radioactive wastes (needles, tubes) in order to suppress any danger. The second text presents a decree of the 31 december 1999, relative to the limitations of noise and external risks resulting from the nuclear facilities exploitation: noise, atmospheric pollution, water pollution, wastes management and fire prevention. (A.L.B.)

  13. Distinguishing Byproducts from Non-Adaptive Effects of Algorithmic Adaptations

    Directory of Open Access Journals (Sweden)

    Justin H. Park

    2007-01-01

    Full Text Available I evaluate the use of the byproduct concept in psychology, particularly the adaptation-byproduct distinction that is commonly invoked in discussions of psychological phenomena. This distinction can be problematic when investigating algorithmic mechanisms and their effects, because although all byproducts may be functionless concomitants of adaptations, not all incidental effects of algorithmic adaptations are byproducts (although they have sometimes been labeled as such. I call attention to Sperber's (1994 distinction between proper domains and actual domains of algorithmic mechanisms. Extending Sperber's distinction, I propose the terms adaptive effects and non-adaptive effects, which more accurately capture the phenomena of interest to psychologists and prevent fruitless adaptation-versus-byproduct debates.

  14. Toxic Byproduct Formation during Electrochemical Treatment of Latrine Wastewater.

    Science.gov (United States)

    Jasper, Justin T; Yang, Yang; Hoffmann, Michael R

    2017-06-20

    Electrochemical systems are an attractive option for onsite latrine wastewater treatment due to their high efficiency and small footprint. While concerns remain over formation of toxic byproducts during treatment, rigorous studies examining byproduct formation are lacking. Experiments treating authentic latrine wastewater over variable treatment times, current densities, chloride concentrations, and anode materials were conducted to characterize byproducts and identify conditions that minimize their formation. Production of inorganic byproducts (chlorate and perchlorate) and indicator organic byproducts (haloacetic acids and trihalomethanes) during electrolysis dramatically exceeded recommendations for drinking water after one treatment cycle (∼10-30 000 times), raising concerns for contamination of downstream water supplies. Stopping the reaction after ammonium was removed (i.e., the chlorination breakpoint) was a promising method to minimize byproduct formation without compromising disinfection and nutrient removal. Though treatment was accelerated at increased chloride concentrations and current densities, byproduct concentrations remained similar near the breakpoint. On TiO 2 /IrO 2 anodes, haloacetic acids (up to ∼50 μM) and chlorate (up to ∼2 μM) were of most concern. Although boron-doped diamond anodes mineralized haloacetic acids after formation, high production rates of chlorate and perchlorate (up to ∼4 and 25 μM) made them inferior to TiO 2 /IrO 2 anodes in terms of toxic byproduct formation. Organic byproduct formation was similar during chemical chlorination and electrolysis of wastewater, suggesting that organic byproducts are formed by similar pathways in both cases (i.e., reactions with chloramines and free chlorine).

  15. Correlation between the thermoluminescence and the F centre thermal stability in KBr, KI, NaCl and NaF irradiated at room temperature; Correlacion entre la termoluminiscencia y la estabilidad termica de los centros F en KBr, KI, NaCl y NaF irradiados a temperatura ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Mariani, D F

    1977-07-01

    Over the years several models have been proposed to explain the thermoluminescence in irradiated alkali halides. To verify these models, the thermoluminescence and the thermal stability of the F centres in KBr, K l, NaCl and NaF single crystals irradiated at room temperature with x or gamma rays have been studied. It has been concluded that both phenomena, the thermoluminescence and the F centre thermal stability are two different aspects of the same basic phenomenon, i.e. the recombination of mobile interstitials thermally released from traps with F centres (Ausin V. and Alvarez Rivas J.L. 1972). It has been found in some cases, that the H centres also play the role of recombination centres for interstitials. (Author) 42 refs.

  16. Nuclear Regulatory Commission issuances. Volume 40, Number 5

    International Nuclear Information System (INIS)

    1994-11-01

    This book contains issuances of the Atomic Safety and Licensing Boards for November 1994. The issuances include Cameo Diagnostic Centre, Inc. byproduct material license; Georgia Power Company license amendment, transfer to Southern Nuclear for Vogtle Electric Generating Plant, units 1 and 2; Indiana Regional Cancer Center, order modifying and suspending byproduct material license; Louisiana Energy Services, special nuclear material license; Pacific Gas and Electric Company, construction period recovery, facility operating license, Diablo Canyon Nuclear Power plant; and Sequoyah Fuels Corporation, source materials license

  17. Digestion kinetics of carbohydrate fractions of citrus by-products

    DEFF Research Database (Denmark)

    Lashkari, Saman; Taghizadeh, Akbar

    2015-01-01

    The present experiment was carried out to determine the digestion kinetics of carbohydrate fractions of citrus by-products. Grapefruit pulp (GP), lemon pulp (LE), lime pulp (LI) and orange pulp (OP) were the test feed. Digestion kinetic of whole citrus by-products and neutral detergent fiber (NDF......) fraction and acid detergent fiber (ADF) fractions of citrus by-products were measured using the in vitro gas production technique. Fermentation kinetics of the neutral detergent soluble carbohydrates (NDSC) fraction and hemicelluloses were calculated using a curve subtraction. The fermentation rate...... of whole was the highest for the LE (p by-products lag time was longer for hemicellulose than other carbohydrate fractions. There was no significant difference among potential gas production (A) volumes of whole test feeds (p

  18. Sustainable aggregates production : green applications for aggregate by-products.

    Science.gov (United States)

    2015-06-01

    Increased emphasis in the construction industry on sustainability and recycling requires production of : aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizeshence, increased : amount of quarry by-products (QBs). QBs ...

  19. IDENTIFICATION OF TI02/UV DISINFECTION BYPRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Due to concern over the presence of trihalomethanes (THMs) and other chlorinated byproducts in chlorinated drinking water, alternative disinfection methods are being explored. One of the alternative treatment methods currently being evaluated for potential use with small systems ...

  20. Leaching of FGD Byproducts Using a CSTX

    Energy Technology Data Exchange (ETDEWEB)

    Kairies, C.L.; Schroeder, K.T.; Cardone, C.R.

    2005-09-01

    Leaching studies of coal utilization byproducts (CUB) are often performed to determine the compatibility of the material in a particular end-use or disposal environment. Typically, these studies are conducted using either a batch or a fixed-bed column technique. Fixed-bed columns offer the advantage of a continuous flow of effluent that provides elution profiles with changing elution volume and pH. Unfortunately, clogs can form in fixed-bed leaching columns, either because of cementitious properties of the material itself, such as is seen for fluidized bed combustion (FBC) fly ash, or because of precipitate formation, such as can occur when a high-calcium ash is subjected to sulfate-containing leachates. Also, very fine-grained materials, such as gypsum, do not provide sufficient permeability for study in a fixed-bed column. A continuous, stirred-tank extractor (CSTX) is being used as an alternative technique that can provide the elution profile of column leaching but without the low permeability problems. The CSTX has been successfully employed in the leaching of flue gas desulfurization products that would not be sufficiently permeable under traditional column leaching conditions. The results indicate that the leaching behavior depends on a number of factors, including (but not limited to) solubility and neutralization capacity of the mineral phases present, sorption properties of these phases, behavior of the solubilized material in the tank, and the type of species in solution. In addition, leaching to near-exhaustion of a wallboard produced from FGD gypsum has allowed the isolation of a highly adsorptive phase. This phase appears to be present in at least some FGD gypsums and accounts for the immobilization of trace metals such as arsenic, cobalt, lead, and mercury.

  1. Industry of petroleum and its by-products

    International Nuclear Information System (INIS)

    Haddad, Antoine

    1989-01-01

    A comprehensive study of petroleum industry and its by-products is presented. Petroleum, since its origin and all steps of its industry including its detection, production and transportation is described. A historical description of the production and formation of fuels under the ground strates through million of years, as well as its chemical composition are presented. A full description of refining petrol and all by-products derived is given. Pictures and tables enhance the explanation

  2. Water disinfection agents and disinfection by-products

    Science.gov (United States)

    Ilavský, J.; Barloková, D.; Kapusta, O.; Kunštek, M.

    2017-10-01

    The aim of this work is to describe factors of water quality change in the distribution network and legislative requirements in Slovakia for disinfectants and disinfection byproducts (DBPs). In the experimental part, the time dependence of the application of the chlorine dioxide and sodium hypochlorite on the formation of some by-products of disinfection for drinking water from WTP Hriňová is studied. We monitored trihalomethanes, free chlorine, chlorine dioxide and chlorites.

  3. Comparative Phytonutrient Analysis of Broccoli By-Products: The Potentials for Broccoli By-Product Utilization.

    Science.gov (United States)

    Liu, Mengpei; Zhang, Lihua; Ser, Suk Lan; Cumming, Jonathan R; Ku, Kang-Mo

    2018-04-13

    The phytonutrient concentrations of broccoli ( Brassica oleracea var. italica) florets, stems, and leaves were compared to evaluate the value of stem and leaf by-products as a source of valuable nutrients. Primary metabolites, including amino acids, organic acids, and sugars, as well as glucosinolates, carotenoids, chlorophylls, vitamins E and K, essential mineral elements, total phenolic content, antioxidant activity, and expression of glucosinolate biosynthesis and hydrolysis genes were quantified from the different broccoli tissues. Broccoli florets had higher concentrations of amino acids, glucoraphanin, and neoglucobrassicin compared to other tissues, whereas leaves were higher in carotenoids, chlorophylls, vitamins E and K, total phenolic content, and antioxidant activity. Leaves were also good sources of calcium and manganese compared to other tissues. Stems had the lowest nitrile formation from glucosinolate. Each tissue exhibited specific core gene expression profiles supporting glucosinolate metabolism, with different gene homologs expressed in florets, stems, and leaves, which suggests that tissue-specific pathways function to support primary and secondary metabolic pathways in broccoli. This comprehensive nutrient and bioactive compound profile represents a useful resource for the evaluation of broccoli by-product utilization in the human diet, and as feedstocks for bioactive compounds for industry.

  4. Comparative Phytonutrient Analysis of Broccoli By-Products: The Potentials for Broccoli By-Product Utilization

    Directory of Open Access Journals (Sweden)

    Mengpei Liu

    2018-04-01

    Full Text Available The phytonutrient concentrations of broccoli (Brassica oleracea var. italica florets, stems, and leaves were compared to evaluate the value of stem and leaf by-products as a source of valuable nutrients. Primary metabolites, including amino acids, organic acids, and sugars, as well as glucosinolates, carotenoids, chlorophylls, vitamins E and K, essential mineral elements, total phenolic content, antioxidant activity, and expression of glucosinolate biosynthesis and hydrolysis genes were quantified from the different broccoli tissues. Broccoli florets had higher concentrations of amino acids, glucoraphanin, and neoglucobrassicin compared to other tissues, whereas leaves were higher in carotenoids, chlorophylls, vitamins E and K, total phenolic content, and antioxidant activity. Leaves were also good sources of calcium and manganese compared to other tissues. Stems had the lowest nitrile formation from glucosinolate. Each tissue exhibited specific core gene expression profiles supporting glucosinolate metabolism, with different gene homologs expressed in florets, stems, and leaves, which suggests that tissue-specific pathways function to support primary and secondary metabolic pathways in broccoli. This comprehensive nutrient and bioactive compound profile represents a useful resource for the evaluation of broccoli by-product utilization in the human diet, and as feedstocks for bioactive compounds for industry.

  5. Applications developed for byproduct 85Kr and tritium

    International Nuclear Information System (INIS)

    Remini, W.C.; Case, F.N.; Haff, K.W.; Tiegs, S.M.

    1983-01-01

    The radionuclides, krypton-85 and tritium, both of which are gases under ordinary conditions, are used in many applications in industries and by the military forces. Krypton-85 is produced during the fissioning of uranium and is released during the dissolution of spent-fuel elements. It is a chemically inert gas that emits 0.695-MeV beta rays and a small yield of 0.54-MeV gammas over a half life of 10.3 years. Much of the 85 Kr currently produced is released to the atmosphere; however, large-scale reprocessing of fuel will require collection of the gas and storage as a waste product. An alternative to storage is utilization, and since the chemical and radiation characteristics of 85 Kr make this radionuclide a relatively low hazard from the standpoint of contamination and biological significance, a number of uses have been developed. Tritium is produced as a byproduct of the nuclear-weapons program, and it has a half life of 12.33 years. It has a 0.01861-MeV beta emission and no gamma emission. The absence of a gamma-ray energy eliminates the need for external shielding of the devices utilizing tritium, thus making them easily transportable. Many of the applications require only small quantities of 85 Kr or tritium; however, these uses are important to the technology base of the nation. A significant development that has the potential for beneficial utilization of large quantities of 85 Kr and of tritium involves their use in the production of low-level lighting devices. Since these lights are free from external fuel supplies, have a long half life (> 10 years), are maintenance-free, reliable, and easily deployed, both military and civilian airfield-lighting applications are being studied

  6. A study on the safety regulation of byproduct material

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jong Soon; Song, Yang Su [Chosun Univ., Gwangju (Korea, Republic of)

    1999-04-15

    The objective of this study is to develop the technical criteria and regulatory system for establishing the safe regulation of byproduct material institutionally. Up to this point, domestically, though many byproduct materials are distributed and used already, it seems that there are no related technical criteria and regulatory system and it becomes an obstacle in the development of relating industry. Since this kind of situation may give negative impact on the proper recognizance of the radiation to public, it is very urgent to establish the safe regulation of byproduct material. In relating to the domestic license of byproduct material, a survey of technical criteria and status of regulation in U.S.A. A determination of range of application and contents of byproduct material. A tentative suggestion of related technical criteria and regulatory system. A study was performed about the above topics to establish the safe regulation of byproduct material institutionally, and this can be contributed in establishing the proper domestic technical criteria related.

  7. Current regulatory and licensing status for byproduct sources, facilities and applications

    International Nuclear Information System (INIS)

    Tingey, G.L.; Jensen, G.A.; Hazelton, R.F.

    1985-02-01

    Public use of nuclear byproducts, especially radioactive isotopes, will require approval by various regulatory agencies. Use of cesium-137 as an irradiation source for sterilizing medical products will require US Nuclear Regulatory Commission (NRC) approval. Two applications have been filed with NRC, and approval is expected soon. Widespread use of irradiation for food products depends on a favorable ruling by the Food and Drug Administration (FDA). A ruling is pending that would permit irradiation of fruits and vegetables up to 100 krad. NRC also controls the use of isotopes in remote power generators, but little regulatory action has been required in recent years. Recent development of radioluminescent (RL) lighting for runway lights has led to interest by commercial manufacturers. At the present time, a license has been issued to at least one manufacturer for sale of tritium-powered runway lights. 28 refs., 1 fig

  8. Recent advances in nuclear cardiology

    International Nuclear Information System (INIS)

    Lee, Won Woo

    2016-01-01

    Nuclear cardiology is one of the major fields of nuclear medicine practice. Myocardial perfusion studies using single-photon emission computed tomography (SPECT) have played a crucial role in the management of coronary artery diseases. Positron emission tomography (PET) has also been considered an important tool for the assessment of myocardial viability and perfusion. However, the recent development of computed tomography (CT)/magnetic resonance imaging (MRI) technologies and growing concerns about the radiation exposure of patients remain serious challenges for nuclear cardiology. In response to these challenges, remarkable achievements and improvements are currently in progress in the field of myocardial perfusion imaging regarding the applicable software and hardware. Additionally, myocardial perfusion positron emission tomography (PET) is receiving increasing attention owing to its unique capability of absolute myocardial blood flow estimation. An F-18-labeled perfusion agent for PET is under clinical trial with promising interim results. The applications of F-18 fluorodeoxyglucose (FDG) and F-18 sodium fluoride (NaF) to cardiovascular diseases have revealed details on the basic pathophysiology of ischemic heart diseases. PET/MRI seems to be particularly promising for nuclear cardiology in the future. Restrictive diseases, such as cardiac sarcoidosis and amyloidosis, are effectively evaluated using a variety of nuclear imaging tools. Considering these advances, the current challenges of nuclear cardiology will become opportunities if more collaborative efforts are devoted to this exciting field of nuclear medicine

  9. Effects of byproducts on intestinal microbiota and the immune modulation

    Directory of Open Access Journals (Sweden)

    Da Yoon Yu

    2018-03-01

    Full Text Available Objective Although the efficacy of Rubus coreanus (RC byproducts as a feed additive has been recognized, its effects on intestinal microorganisms and the immune system are still unknown. Methods Six-week-old male rats were treated with 0.5% RC (T1, 1.0% RC (T2, and 1.5% RC (T3 for 4 weeks. Results We found that treatment with RC byproducts significantly increased the daily gain of body weight and feed intake. Treg-cell differentiation was enhanced in the mesenteric lymph nodes and spleen from the rats fed with RC byproducts. Illumina sequencing showed that bacteria in the phylum Firmicutes decreased and while those in the phylum Bacteroidetes increased in RC-treated groups. Particularly, the pathogenic microorganisms in the family Peptococcaceae decreased, and the non-pathogenic families Lachnospiraceae and S24-7 increased. Quantitative polymerase chain reaction analysis showed that the RC byproducts increased the lactic acid bacteria Bifidobacterium spp., Oscillospira spp., Leuconostoc citreum, and Weissella cibaria in a concentration-dependent manner. Conclusion RC byproducts may be effective in immunomodulation by affecting intestinal microorganisms.

  10. Utilization of by-products in ruminant diets in Cyprus

    International Nuclear Information System (INIS)

    Economides, S.; Hadjipanayiotou, M.

    1987-01-01

    Five experiments were carried out with the objective of studying the nutritive value of crop residues and agro-industrial by-products, either alone or in combination with non-protein nitrogen, and the use of these by-products in ruminant diets. The intake and nutritive value of poor quality roughages and other by-products (cereal straw, peanut hulls and waste paper) were improved considerably by supplements that provide nitrogen (soybean meal or urea) and energy (barley grain). Partial replacement of soybean meal in diets of fattening lambs by urea was possible and dry mature sheep could be maintained on cereal straw diets supplemented with small quantities of barley grain, urea, minerals and vitamins. Silage was made from citrus peels or grape marc and poultry litter. It replaced successfully part of the concentrate mixture in the diets of lactating cows and growing heifers. (author)

  11. Land application uses for dry FGD by-products

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W. (Ohio State Univ., Columbus, OH (United States)); Haefner, R. (Geological Survey, Columbus, OH (United States). Water Resources Div.)

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. Presently FGD by-product materials are treated as solid wastes and must be landfilled. However, landfill sites are becoming more scarce and tipping fees are constantly increasing. It is, therefore, highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. In summary Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD byproduct materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  12. Application of flotational reagents obtained from coke-industry byproducts

    Energy Technology Data Exchange (ETDEWEB)

    N.I. Nikitin; I.N. Nikitin; N.I. Toporkova [Khar' kov Polytechnic Institute (Ukraine)

    2007-06-15

    Today, the operational efficiency of coal-preparation shops at coke plants largely depends on the flotation process, since flotation is the basic method of regenerating the slurry water in the water-slurry systems and the basic enrichment process for small-grain coal slurries. At The Coal-Chemistry Institute, attempts have been made to address the growing demand for readily available and relatively inexpensive flotational reagents. In particular, a list of promising coke-industry byproducts for use as flotational reagents has been compiled, and the possibility of reducing their toxicity has been established. In addition, various industrial byproducts and wastes have been investigated in terms of flotational activity.

  13. Management of radioactive by-products from the uses of atomic energy in the German Democratic Republic

    International Nuclear Information System (INIS)

    1990-01-01

    Radioactive by-products arise in the form of spent nuclear fuel, radioactive wastes and effluents from the generation of electricity by nuclear power as well as the production and uses of radionuclides in industry, medicine and research. Their safe management and their disposal without endangering man and the environment have to be ensured. This report presents an overview of the system of central collection and final disposal of low-level and intermediate-level radioactive wastes developed in the GDR by using an abandoned rock salt mine, including the relevant regulations, the licensing procedure and the control activities performed by the plant operator and, independently, by government authorities. It also addresses questions concerning the management of spent nuclear fuel and the decommissioning of nuclear facilities. (author)

  14. The Advantage and Limitation of Agriculture Byproduct and Feeding Strategy Based on Agriculture Byproduct for Beef Cattle

    Directory of Open Access Journals (Sweden)

    Mariyono

    2009-03-01

    Full Text Available Feed supply is getting limited since the use of land for forages has been replaced by building industries big plantation, agriculture. Sustainable integration between animal and food crop and plantation is efficient and gives advantage for both. Rice, cassava soybean, groundnut, palm oil, coconut, coffee, cocoa and sugar cane are food crop and plantation which their byproducts are generally used or modified/processed for ruminant production. This paper describes optimization on the use of these byproducts to decrease feed cost without ignoring the feed quality. These byproducts have special characteristic and limitation with fluctuated price. Their nutritive values vary and they can be grouped into fiber, fiber-energy, fiber-protein, protein or energy sources. Therefore, special strategy for each location and purpose of livestock industry is required to get an efficient and optimal feed composition.

  15. MARKETING OF BYPRODUCT GYPSUM FROM FLUE GAS DESULFURIZATION

    Science.gov (United States)

    The report gives results of an evaluation of the 1985 marketing potential of byproduct gypsum from utility flue gas desulfurization (FGD), for the area east of the Rocky Mountains, using the calculated gypsum production rates of 14 selected power plants. The 114 cement plants and...

  16. Chemical production from industrial by-product gases: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyke, S.E.; Moore, R.H.

    1981-04-01

    The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

  17. 9 CFR 95.3 - Byproducts from diseased animals prohibited.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Byproducts from diseased animals prohibited. 95.3 Section 95.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS...

  18. An Onion Byproduct Affects Plasma Lipids in Healthy Rats

    DEFF Research Database (Denmark)

    Roldan-Marin, E.; Jensen, R. I.; Krath, Britta

    2010-01-01

    Onion may contribute to the health effects associated with high fruit and vegetable consumption. A considerable amount of onion production ends up as waste that might find use in foods. Onion byproduct has not yet been explored for potential health benefits. The aim of this study is to elucidate ...

  19. Sustainable Disposal of Edible Food Byproducts at University Research Farms

    Science.gov (United States)

    Baldwin, Sherill; Chung, Kimberly

    2007-01-01

    Purpose: Research at agricultural universities often generates food crops that are edible by-products of the research process. The purpose of this paper is to explore the factors that affect decision-making around the disposal of these crops. Understanding decision-making suggests how universities might include food crop production into campus…

  20. Volatiles from roasted byproducts of the poultry-processing industry.

    Science.gov (United States)

    Wettasinghe, M; Vasanthan, T; Temelli, F; Swallow, K

    2000-08-01

    Volatiles of roasted chicken breast muscle and byproducts, such as backbones, breastbones, spent bones, and skin, were investigated. Total volatile concentrations ranged from 2030 ppb in the roasted backbones to 4049 ppb in the roasted skin. The major classes of volatile compounds detected in roasted samples were aldehydes (648-1532 ppb) and alcohols (336-1006 ppb). Nitrogen- and/or sulfur-containing compounds were also detected in appreciable quantities (161-706 ppb) in all samples. For all samples, hexanal and 2-methyl-2-buten-1-ol were dominant among the aldehydes and alcohols, respectively. Among the nitrogen- and sulfur-containing compounds, Maillard reaction products, such as tetrahydropyridazines, piperidines, and thiazoles, were the major contributors to the total volatile content in all samples. The composition of volatiles observed in roasted byproducts was markedly different from that of the roasted breast muscle. Therefore, the blending of the byproducts in appropriate proportions or blending of volatile flavor extracts from different byproducts may be necessary to obtain an aroma that mimics roasted chicken aroma.

  1. Nutritional Value of Irradiated Animal Feed By-Products

    International Nuclear Information System (INIS)

    El-Din Farag, M.D.H.

    1998-01-01

    Animal feed by-products, widely used in animal diets, are sources of disease organisms for animals and for human beings. Salmonella is the principal genus of concern.Radiation treatment (radicidation, radurization) is a promising method of decontamination of feed ingredients. Commercial samples of fish, meat, and blood meals were sealed by heat in polyethylene bags and irradiated at dose levels of 5.0, 10, 20 and 50 kGy. Their chemical analysis were carried out according to A. O. A.C [1] and the total protein efficiency (TPE) of the three animal feed by-products was determined according to Wood ham (2) by using one day old Dokki-4 chicks. Radiation induced an insignificant effect on the chemical constituent of meals. Also, the same trend was observed with TPE of both fish and meat meals. However, irradiation treatments improved TPE values of irradiated blood meal samples. From the results, it could be concluded that irradiation of animal feed by-products up to a dose level of 50 Gy has no adverse effects on the nutritional value of animal feed by-products

  2. Determination of Machining Parameters of Corn Byproduct Filled Plastics

    Science.gov (United States)

    In a collaborative project between the USDA and Northern Illinois University, the use of ethanol corn processing by-products as bio-filler materials in the compression molding of phenolic plastics has been studied. This paper reports on the results of a machinability study in the milling of various ...

  3. Determining Machining Parameters of Corn Byproduct Filled Plastics

    Science.gov (United States)

    In a collaborative project between the USDA and Northern Illinois University, the use of corn ethanol processing byproducts (i.e., DDGS) as bio-filler materials in the compression molding of phenolic plastics has been studied. This paper reports on the results of a machinability study in the milling...

  4. Integrating sustainable biofuels and byproducts into forest industry supply chains

    Science.gov (United States)

    Reid Hensen; Maureen Essen; Nathaniel Anderson; Larry Peters; April Kimmerly

    2016-01-01

    Forest biomass is a promising feedstock for the production of bioenergy, biofuels, and bioproducts because it is renewable and widely available as a byproduct of forest management. Its harvest and use also has the potential to positively impact rural communities, especially those negatively impacted by upheaval in the forest sector.

  5. MSWI by-products and immobilisates as concrete constituents

    NARCIS (Netherlands)

    Florea, M.V.A.; Quaas, L.C.; Brouwers, H.J.H.; Schmidt, W.; Msinjili, N.S.

    2016-01-01

    Municipal solid waste incineration (MSWI) produces a number of by-products: fly ashes, bottom ash and air pollution control residues. All these materials contain certain levels of contaminants, such as heavy metals, chlorides and sulphates among others, which are higher than the accepted limits for

  6. Study of the efficiency of AgCl, In2O3, Ga2O3, NaF, LiF and SrF2 as spectrographic carriers in the quantitative analysis of eighteen microcompound elements in uranium

    International Nuclear Information System (INIS)

    Gomes, R.P.; Lordello, A.R.; Abrao, A.

    1977-01-01

    A comparative study of the efficiency of some spectrochemical carriers (AgCl, In 2 O 3 , Ga 2 O 3 , NaF, LiF and SrF 2 ) is presented for the quantitative spectrographic analysis of Ag, Al, B, Bi, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Ni, P, Pb, Si, Sn, V and Zn in uranium and its compounds. The volatility behaviour of the eighteen elements was verified by means of the moving plate technique for each of the mentioned carriers. The final aim was the selection of the carriers for the determination of trace amounts of the impurities. The best results were obtained with 4% In 2 O 3 , 6% AgCl and 6% NaF in a U 3 O 8 matrix. The sensitivities for some elements were extended to fractions of p.p.m. The precision, accuracy and acceptability of the method were calculated for all elements. The total error values are approximately in the range of 16-45% [pt

  7. An onion byproduct affects plasma lipids in healthy rats.

    Science.gov (United States)

    Roldán-Marín, Eduvigis; Jensen, Runa I; Krath, Britta N; Kristensen, Mette; Poulsen, Morten; Cano, M Pilar; Sánchez-Moreno, Concepción; Dragsted, Lars O

    2010-05-12

    Onion may contribute to the health effects associated with high fruit and vegetable consumption. A considerable amount of onion production ends up as waste that might find use in foods. Onion byproduct has not yet been explored for potential health benefits. The aim of this study is to elucidate the safety and potential role of onion byproducts in affecting risk markers of cardiovascular disease (CVD). For that purpose, the effects of an onion byproduct, Allium cepa L. cepa 'Recas' (OBP), and its two derived fractions, an ethanolic extract (OE) and a residue (OR), on the distribution of plasma lipids and on factors affecting cholesterol metabolism in healthy rats have been investigated. The OBP or its fractions did not significantly reduce cholesterol or down-regulate hepatic 3-hydroxy-3-methylglutaryl-coenzyme A reductase (Hmgcr) gene expression. The OR even had the effect of increasing plasma triacylglycerides (TAG) and cholesterol in the very low density lipoprotein (VLDL-C) fraction. Neither total bile acids nor total primary or secondary bile acids were significantly affected by feeding rats the OBP or its fractions. Principal component analysis combining all markers revealed that the controls could be completely separated from OBP, OE, and OR groups in the scores plot and also that OE and OR groups were separated. Plasma lipids and bile acid excretion were the discriminating loading factors for separating OE and OR but also contributed to the separation of onion-fed animals and controls. It was concluded that the onion byproduct did not present significant beneficial effects on individual markers related to plasma lipid transport in this healthy rat model but that onion byproduct contains factors with the ability to modulate plasma lipids and lipoprotein levels.

  8. Experimental cancer studies of chlorinated by-products

    International Nuclear Information System (INIS)

    Komulainen, Hannu

    2004-01-01

    Chlorinated drinking water contains a number of different by-products formed during the chlorination process from organic matter. The carcinogenicity of only a fraction of them have been evaluated in experimental animals. The focus has been on compounds and groups of compounds that are most abundant in chlorinated drinking water or the in vitro toxicity data have suggested genotoxic potential. From trihalomethanes, chloroform causes liver tumors in mice and female rats and renal tumors in male mice and rats. Tumor formation by chloroform is strongly associated with cytotoxicity and regenerative cell proliferation in tissues and that has been considered to be one determinant of its carcinogenicity. From halogenic acetic acids, dichloroacetic acid (DCA) and trichlotoacetic acid (TCA) are hepatocarcinogenic in mice and DCA in male rats. Their genotoxicity is equivocal and nongenotoxic mechanisms, such as peroxisome proliferation and hypomethylation of DNA in the liver, likely contribute to tumor development. From chlorinated furanones (CHFs), 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) is a multisite carcinogen in rats (e.g. in thyroid glands and liver) and it has caused DNA damage in vivo. MX may be a complete carcinogen because it also has promoter properties in vitro. Chlorinated drinking water may also contain brominated by-products providing the raw water contains bromide. At least some of them (bromodichloromethane, bromoform) have been shown to be carcinogenic in laboratory animals. Altogether, although several by-products have been shown to have carcinogenic potential in laboratory animals, it not yet possible to state which compounds or groups of by-products cause the cancer risk in chlorinated drinking water. The cellular mechanisms of their effects and these effects at low concentrations are still poorly understood. The few studies with mixtures of these by-products suggest that the mixture effects may be complex and unpredictable (inhibitory

  9. Production of highly unsaturated fatty acids using agro-processing by-products

    CSIR Research Space (South Africa)

    Jacobs, A

    2008-11-01

    Full Text Available The South African agro-processing industry generates millions of tons of cereal derived by-products annually. The by-products from biofuel production are expected to increase these volumes dramatically. Highly unsaturated fatty acids (HUFA...

  10. Effect and key factors of byproducts valorization: the case of dairy industry

    NARCIS (Netherlands)

    Banaszewska, A.; Cruijssen, F.C.A.M.; Claassen, G.D.H.; Vorst, van der J.G.A.J.

    2014-01-01

    Production of many consumer products results in byproducts that contain a considerably large part of nutrients originating from input materials. High production volumes, environmental impact, and nutritional content of byproducts make them an important subject for careful valorization. Valorization

  11. Utilization of biodiesel by-products for mosquito control.

    Science.gov (United States)

    Pant, Megha; Sharma, Satyawati; Dubey, Saurabh; Naik, Satya Narayan; Patanjali, Phool Kumar

    2016-03-01

    The current paper has elaborated the efficient utilization of non-edible oil seed cakes (NEOC), by-products of the bio-diesel extraction process to develop a herbal and novel mosquitocidal composition against the Aedes aegypti larvae. The composition consisted of botanical active ingredients, inerts, burning agents and preservatives; where the botanical active ingredients were karanja (Pongamia glabra) cake powder and jatropha (Jatropha curcas) cake powder, products left after the extraction of oil from karanja and jatropha seed. The percentage mortality value recorded for the combination with concentration, karanja cake powder (20%) and jatropha cake powder (20%), 1:1 was 96%. The coil formulations developed from these biodiesel by-products are of low cost, environmentally friendly and are less toxic than the synthetic active ingredients. Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  12. Cell wall bound anionic peroxidases from asparagus byproducts.

    Science.gov (United States)

    Jaramillo-Carmona, Sara; López, Sergio; Vazquez-Castilla, Sara; Jimenez-Araujo, Ana; Rodriguez-Arcos, Rocio; Guillen-Bejarano, Rafael

    2014-10-08

    Asparagus byproducts are a good source of cationic soluble peroxidases (CAP) useful for the bioremediation of phenol-contaminated wastewaters. In this study, cell wall bound peroxidases (POD) from the same byproducts have been purified and characterized. The covalent forms of POD represent >90% of the total cell wall bound POD. Isoelectric focusing showed that whereas the covalent fraction is constituted primarily by anionic isoenzymes, the ionic fraction is a mixture of anionic, neutral, and cationic isoenzymes. Covalently bound peroxidases were purified by means of ion exchange chromatography and affinity chromatography. In vitro detoxification studies showed that although CAP are more effective for the removal of 4-CP and 2,4-DCP, anionic asparagus peroxidase (AAP) is a better option for the removal of hydroxytyrosol (HT), the main phenol present in olive mill wastewaters.

  13. Agro-industrial by-products as ruminant feed

    International Nuclear Information System (INIS)

    Jayasuriya, M.C.N.

    1986-01-01

    A marked imbalance exists in many parts of the world between the number of ruminants and the availability of good quality fodder. The low feeding value of natural pastures, their seasonality of production, and the increasing cost of feed grain, have increased the dependence of ruminant animals on crop residues and by-products of agriculture for their nutrient requirements. Intensive animal production systems suitable for developed temperate regions have not been successful in the developing tropical countries, where appropriate farming systems for livestock production should have an integrated approach, combining both crop and livestock husbandry. Adoption of nutritional principles with a view to eliminating or reducing imbalances and optimizing rumen function have yielded excellent results, illustrating the future potential of fibrous residues and other agricultural by-products in ruminant feeding systems in developing countries. (author)

  14. Assessment of bacterial diversity during composting of agricultural byproducts

    Science.gov (United States)

    2013-01-01

    Background Composting is microbial decomposition of biodegradable materials and it is governed by physicochemical, physiological and microbiological factors. The importance of microbial communities (bacteria, actinomycetes and fungi) during composting is well established. However, the microbial diversity during composting may vary with the variety of composting materials and nutrient supplements. Therefore, it is necessary to study the diversity of microorganisms during composting of different agricultural byproducts like wheat bran, rice bran, rice husk, along with grass clippings and bulking agents. Here it has been attempted to assess the diversity of culturable bacteria during composting of agricultural byproducts. Results The culturable bacterial diversity was assessed during the process by isolating the most prominent bacteria. Bacterial population was found to be maximum during the mesophilic phase, but decreased during the thermophilic phase and declined further in the cooling and maturation phase of composting. The bacterial population ranged from 105 to 109 cfu g-1 compost. The predominant bacteria were characterized biochemically, followed by 16S rRNA gene sequencing. The isolated strains, both Gram-positive and Gram-negative groups belonged to the order Burkholderiales, Enterobacteriales, Actinobacteriales and Bacillales, which includes genera e.g. Staphylococcus, Serratia, Klebsiella, Enterobacter, Terribacillus, Lysinibacillus Kocuria, Microbacterium, Acidovorax and Comamonas. Genera like Kocuria, Microbacterium, Acidovorax, Comamonas and some new species of Bacillus were also identified for the first time from the compost made from agricultural byproducts. Conclusion The use of appropriate nitrogen amendments and bulking agents in composting resulted in good quality compost. The culture based strategy enabled us to isolate some novel bacterial isolates like Kocuria, Microbacterium, Acidovorax and Comamonas first time from agro-byproducts compost

  15. Producing ammonium sulfate from flue gas desulfurization by-products

    Science.gov (United States)

    Chou, I.-Ming; Bruinius, J.A.; Benig, V.; Chou, S.-F.J.; Carty, R.H.

    2005-01-01

    Emission control technologies using flue gas desulfurization (FGD) have been widely adopted by utilities burning high-sulfur fuels. However, these technologies require additional equipment, greater operating expenses, and increased costs for landfill disposal of the solid by-products produced. The financial burdens would be reduced if successful high-volume commercial applications of the FGD solid by-products were developed. In this study, the technical feasibility of producing ammonium sulfate from FGD residues by allowing it to react with ammonium carbonate in an aqueous solution was preliminarily assessed. Reaction temperatures of 60, 70, and 80??C and residence times of 4 and 6 hours were tested to determine the optimal conversion condition and final product evaluations. High yields (up to 83%) of ammonium sulfate with up to 99% purity were achieved under relatively mild conditions. The optimal conversion condition was observed at 60??C and a 4-hour residence time. The results of this study indicate the technical feasibility of producing ammonium sulfate fertilizer from an FGD by-product. Copyright ?? Taylor & Francis Inc.

  16. Economical Recovery of By-products in the Mining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    2001-12-05

    The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper

  17. A HUMAN RELIABILITY-CENTERED APPROACH TO THE DEVELOPMENT OF JOB AIDS FOR REVIEWERS OF MEDICAL DEVICES THAT USE RADIOLOGICAL BYPRODUCT MATERIALS.

    Energy Technology Data Exchange (ETDEWEB)

    COOPER, S.E.; BROWN, W.S.; WREATHALL, J.

    2005-02-02

    The U.S. Nuclear Regulatory Commission (NRC) is engaged in an initiative to risk-inform the regulation of byproduct materials. Operating experience indicates that human actions play a dominant role in most of the activities involving byproduct materials, which are radioactive materials other than those used in nuclear power plants or in weapons production, primarily for medical or industrial purposes. The overall risk of these activities is strongly influenced by human performance. Hence, an improved understanding of human error, its causes and contexts, and human reliability analysis (HRA) is important in risk-informing the regulation of these activities. The development of the human performance job aids was undertaken by stages, with frequent interaction with the prospective users. First, potentially risk significant human actions were identified based on reviews of available risk studies for byproduct material applications and of descriptions of events for byproduct materials applications that involved potentially significant human actions. Applications from the medical and the industrial domains were sampled. Next, the specific needs of the expected users of the human performance-related capabilities were determined. To do this, NRC headquarters and region staff were interviewed to identify the types of activities (e.g., license reviews, inspections, event assessments) that need HRA support and the form in which such support might best be offered. Because the range of byproduct uses regulated by NRC is so broad, it was decided that initial development of knowledge and tools would be undertaken in the context of a specific use of byproduct material, which was selected in consultation with NRC staff. Based on needs of NRC staff and the human performance related characteristics of the context chosen, knowledge resources were then compiled to support consideration of human performance issues related to the regulation of byproduct materials. Finally, with

  18. A HUMAN RELIABILITY-CENTERED APPROACH TO THE DEVELOPMENT OF JOB AIDS FOR REVIEWERS OF MEDICAL DEVICES THAT USE RADIOLOGICAL BYPRODUCT MATERIALS

    International Nuclear Information System (INIS)

    COOPER, S.E.; BROWN, W.S.; WREATHALL, J.

    2005-01-01

    The U.S. Nuclear Regulatory Commission (NRC) is engaged in an initiative to risk-inform the regulation of byproduct materials. Operating experience indicates that human actions play a dominant role in most of the activities involving byproduct materials, which are radioactive materials other than those used in nuclear power plants or in weapons production, primarily for medical or industrial purposes. The overall risk of these activities is strongly influenced by human performance. Hence, an improved understanding of human error, its causes and contexts, and human reliability analysis (HRA) is important in risk-informing the regulation of these activities. The development of the human performance job aids was undertaken by stages, with frequent interaction with the prospective users. First, potentially risk significant human actions were identified based on reviews of available risk studies for byproduct material applications and of descriptions of events for byproduct materials applications that involved potentially significant human actions. Applications from the medical and the industrial domains were sampled. Next, the specific needs of the expected users of the human performance-related capabilities were determined. To do this, NRC headquarters and region staff were interviewed to identify the types of activities (e.g., license reviews, inspections, event assessments) that need HRA support and the form in which such support might best be offered. Because the range of byproduct uses regulated by NRC is so broad, it was decided that initial development of knowledge and tools would be undertaken in the context of a specific use of byproduct material, which was selected in consultation with NRC staff. Based on needs of NRC staff and the human performance related characteristics of the context chosen, knowledge resources were then compiled to support consideration of human performance issues related to the regulation of byproduct materials. Finally, with

  19. 9 CFR 355.42 - Marking of mule meat and animal food mule meat by-product.

    Science.gov (United States)

    2010-01-01

    ... mule meat by-product. 355.42 Section 355.42 Animals and Animal Products FOOD SAFETY AND INSPECTION... Meat and Animal Food, Mule Meat By-Product § 355.42 Marking of mule meat and animal food mule meat by-product. All mule meat and animal food mule meat by-product inspected under this part shall be marked and...

  20. Boron availability to plants from coal combustion by-products

    International Nuclear Information System (INIS)

    Kukier, U.; Sumner, M.E.

    1996-01-01

    Agronomic use of coal combustion by-products is often associated with boron (B) excess in amended soils and subsequently in plants. A greenhouse study with corn (Zea mays L.) as test plant was conducted to determine safe application rates of five fly ashes and one flue gas desulfurization gypsum (FDG). All by-products increased soil and corn tissue B concentration, in some cases above toxicity levels which are 5 mg hot water soluble B (hwsB)kg -1 soil and 100 mg B kg -1 in corn tissue. Acceptable application rates varied from 4 to 100 Mg ha -1 for different by-products. Leaching and weathering of a high B fly ash under ponding conditions decreased its B content and that of corn grown in fly ash amended soil, while leaching of the same fly ash under laboratory conditions increased fly ash B availability to corn in comparison to the fresh fly ash. Hot water soluble B in fly ash or FDG amended soil correlated very well with corn tissue B. Hot water soluble B in fly ash amended soil could be predicted based on soil pH and B solubility in ash at different pH values but not so in the case of FDG. Another greenhouse study was conducted to compare the influence of FDG and Ca(OH 2 ) on B concentration in spinach (Spinacia oleracea L.) leaves grown in soil amended with the high B fly ash. The Ca(OH) 2 significantly decreased tissue B content, while FDG did not affect B uptake from fly ash amended soil. 41 refs., 6 figs., 5 tabs

  1. On the hazard accumulation of actinide waste in a Pu-fueled LMFBR power economy with and without by-product actinide recycling

    International Nuclear Information System (INIS)

    Anselmi, L.; Caruso, K.; Hage, W.; Schmidt, E.

    1979-01-01

    The actinide waste arisings in terms of hazard potential for ingestion and inhalation are given for a Pu-fueled LMFBR Power Economy as function of decay time. The data were assessed for two simplified fuel cycles, one considering the recycling of by-product actinides and the other their complete discharge to the high-level waste. Two durations of nuclear power and several loss fractions of actinides to the waste were considered. The major contributors in form of chemical elements or isotopes to the actinide waste hazard built up during the nuclear power duration were identified for various decay intervals

  2. Carcinogenic effect of petroleum and its by-products

    Energy Technology Data Exchange (ETDEWEB)

    Gimadeev, M M

    1962-01-01

    A review of literature on the carcinogenic effect of petroleum and its by-products are briefly discussed. Many of the products can induce hyperkeratosis, folliculitis, verruca, pulmonary adenoma, skin cancer, etc. Their action is mainly local but they can also be multicentric. Although a number of groups have made chemical analyses of various petroleums and peroleum products, results were generally negative with respect to 3,4-benzypyrene, although 40 to 68 microg/g was found in 1 crude petroleum. At present it appears that much of the carcinogenic action of these materials resides in polycyclic hydrocarbons about which little is known.

  3. The management of steel industry by-products and waste

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    The report considers the management of solid and semi-solid wastes that are reused or disposed of outside steelworks. Headings are: introduction; ironmaking slags (including generation, properties, processing, uses and disposal); (steelmaking slag from hot metal pretreatment, and primary and secondary steelmaking); ironmaking dust and sludges; steelmaking dust and sludges; millscale and sludge from continuous casting and rolling mills; treatment and handling of used oils and greases; refractory waste from refining of metallurgical furnaces and vessels; by-products, waste and wastewater arising from coke oven batteries; treatment of stainless steel waste; characterisation of waste by leaching tests; dumping technology; and conclusions.

  4. Problems and prospects of nuclear power industry

    International Nuclear Information System (INIS)

    Karelin, A.I.

    2001-01-01

    A consideration is given to problems associated with operating nuclear power plants in many countries and building new NPPs. A special attention is given to safety operation of nuclear plants, to reprocessing and transportation of spent nuclear fuel as well as to radioactive waste disposal. In connection with difficulties in solving the above-mentioned problems a proposition is made to resume work on designing NPPs with the use of nuclear liquid salt reactors based on molten fuel fluoride salts. Advantages and disadvantages of fuel compositions of LiF-BeF 2 -UF 4 -(ThF 4 ) are listed. It is recommended that fundamental studies be carried out into such compositions as KF + CsF; BaF 2 + KF + NaF; AlF 3 + Na 3 AlF 6 , eutectics on the basis of tin and zinc fluorides and their complex salts of M x Sn(Zn)F y . An international program is suggested to be developed to find some way out of crisis of nuclear power industry using research efforts in homogeneous liquid salt nuclear underground reactors with a U(233)-Th fuel cycle [ru

  5. By-product mutualism with evolving common enemies.

    Science.gov (United States)

    De Jaegher, Kris

    2017-05-07

    The common-enemy hypothesis of by-product mutualism states that organisms cooperate when it is in their individual interests to do so, with benefits for other organisms arising as a by-product; in particular, such cooperation is hypothesized to arise when organisms face the common enemy of a sufficiently adverse environment. In an evolutionary game where two defenders can cooperate to defend a common resource, this paper analyzes the common-enemy hypothesis when adversity is endogenous, in that an attacker sets the number of attacks. As a benchmark, we first consider exogenous adversity, where adversity is not subject to evolution. In this case, the common-enemy hypothesis is predicted when the degree of complementarity between defenders' defensive efforts is sufficiently low. When the degree of complementarity is high, the hypothesis is predicted only when cooperation costs are high; when cooperation costs are instead low, a competing hypothesis is predicted, where adversity discourages cooperation. Second, we consider the case of endogenous adversity. In this case, we continue to predict the competing hypothesis for a high degree of complementarity and low cooperation costs. The common-enemy hypothesis, however, only continues to be predicted for the lowest degrees of complementarity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Fish burger enriched by olive oil industrial by-product.

    Science.gov (United States)

    Cedola, Annamaria; Cardinali, Angela; Del Nobile, Matteo Alessandro; Conte, Amalia

    2017-07-01

    Oil industry produces large volume of waste, which represents a disposal and a potential environmental pollution problem. Nevertheless, they are also promising sources of compounds that can be recovered and used as valuable substances. The aim of this work is to exploit solid olive by-products, in particular dry olive paste flour (DOPF) coming from Coratina cultivar, to enrich fish burger and enhance the quality characteristics. In particular, the addition of olive by-products leads to an increase of the phenolic content and the antioxidant activity; however, it also provokes a deterioration of sensory quality. Therefore, to balance quality and sensory characteristics of fish burgers, three subsequent phases have been carried out: first, the quality of DOPF in terms of phenolic compounds content and antioxidant activity has been assessed; afterward, DOPF has been properly added to fish burgers and, finally, the formulation of the enriched fish burgers has been optimized in order to improve the sensory quality. Results suggested that the enriched burgers with 10% DOPF showed considerable amounts of polyphenols and antioxidant activity, even though they are not very acceptable from the sensory point of view. Pre-treating DOPF by hydration/extraction with milk, significantly improved the burger sensory quality by reducing the concentration of bitter components.

  7. Utilization of Biodiesel By-Products for Biogas Production

    Directory of Open Access Journals (Sweden)

    Nina Kolesárová

    2011-01-01

    Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

  8. Potential Biogas Production from Artichoke Byproducts in Sardinia, Italy

    Directory of Open Access Journals (Sweden)

    Fabio De Menna

    2016-02-01

    Full Text Available The paper aims at evaluating the potential biogas production, both in terms of CH4 and theoretical energy potential, from globe artichoke agricultural byproducts in Sardinia. Field data about the productivity of byproducts were collected on five artichoke varieties cultivated in Sardinia, to assess the biomethane production of their aboveground non-food parts (excluding the head. Moreover, secondary data from previous studies and surveys at regional scale were collected to evaluate the potential biogas production of the different districts. Fresh globe artichoke residues yielded, on average, 292.2 Nm3·tDOM−1, with dissimilarities among cultivars. Fresh samples were analyzed in two series: (a wet basis; and (b wet basis with catalytic enzymes application. Enzymes proved to have some beneficial effects in terms of anticipated biomethane availability. At the regional level, ab. 20 × 106 Nm3 CH4 could be produced, corresponding to the 60% of current installed capacity. However, districts potentials show some differences, depending on the specific biomass partitioning and on the productivity of cultivated varieties. Regional assessments should encompass the sensitiveness of results to agro-economic variables and the economic impacts of globe artichoke residue use in the current regional biogas sector.

  9. Synergy and Other Interactions between Polymethoxyflavones from Citrus Byproducts

    Directory of Open Access Journals (Sweden)

    Benito F. García

    2015-11-01

    Full Text Available The citrus by-products released from citrus processing plants may contain high levels of potentially bioactive compounds such as flavonoids, which are a widely distributed group of polyphenolic compounds with health-related properties based on their antioxidant activity. In the study reported here, the potential bioactivities and antioxidant activities of extracts, fractions and compounds from citrus by-products were evaluated along with the chemical interactions of binary mixtures of compounds and complex mixtures. The bioactivities and interactions were evaluated in wheat coleoptile bioassays and the antioxidant activity was evaluated by the al DPPH (2,2-diphenyl-1-picrylhdrazyl radical radical scavenging assay. The extracts, fractions and most of the isolated compounds (mainly polymethoxyflavones showed high activity in the wheat coleoptile bioassay. However, the antioxidant activity was not consistently high, except in the acetone extract fractions. Moreover, a study of the interactions with binary mixtures of polymethoxyflavones showed the occurrence of synergistic effects. The complex mixtures of fractions composed mainly of polymethoxyflavones caused a synergistic effect when it was added to a bioactive compound such as anethole. The results reported here highlight a new application for the wheat coleoptile bioassay as a quick tool to detect potential synergistic effects in compounds or mixtures.

  10. Agroindustrial byproducts in diets for Nile tilapia juveniles

    Directory of Open Access Journals (Sweden)

    João Sérgio Oliveira Carvalho

    2012-03-01

    Full Text Available This study was conducted to evaluate performance and body composition of tilapia (Oreochromis niloticus fed diets containing byproducts aerial parts of cassava meal (Manihot esculenta, mesquite pod meal (Prosopis juliflora, cocoa meal (Theobroma cacao and palm kernel cake (Elaeis guineensis and to analyze the economic viability of the feed. A total of 1,350 juvenile males (100 g were distributed in 15 cages (1 m³ in completely randomized design with five treatments (basal diet and four test diets and three replicates. The following aspects were evaluated: final weight, total feed intake, total weight gain, feed conversion, specific growth rate, protein efficiency ratio and survival rate, dry matter, crude protein, fat and ash body, the average cost of feed per kilogram of weight gain and economic efficiency rate. No differences were observed for total consumption of food or survival rate. For other variables, the inclusion of cocoa and cassava meal impaired fish performance. No differences were observed for dry matter, crude protein and body ash. The lower body fat accumulation was recorded for the tilapia fed palm kernel cake. The best economic indicators were found to diets containing palm kernel cake. The byproducts evaluated can be used up to 150 g/kg in feed formulation, providing good performance and economic rate for Nile tilapia.

  11. Toxicity of fluorescent tracers and their degradation byproducts

    Directory of Open Access Journals (Sweden)

    Philippe Gombert

    2017-01-01

    Full Text Available Tracer tests are frequently used to delineate catchment area of water supply springs in karstic zones. In the karstic chalk of Normandy, the main tracers used are fluorescent: uranine, sulforhodamine B, naphtionate, and Tinopal®. In this area, a statistical analysis shows that less than half of the injected tracers joins the monitored restitution points and enters the drinking water system where they undergo chlorination. Most of the injected tracers is absorbed in the rock matrix or is thrown out of the aquifer via karstic springs: then it can join superficial waters where it is degraded due to the sun and air action. The paper presents firstly the laboratory degradation of a first batch of fluorescent tracers in contact with chlorine, in order to simulate their passage through a water treatment system for human consumption. A second batch of the same tracers is subjected to agents of natural degradation: ultraviolet illumination, sunlight and air sparging. Most tracers is degraded, and toxicity and ecotoxicity tests (on rats, daphniae and algae are performed on degradation byproducts. These tests do not show any acute toxicity but a low to moderate ecotoxicity. In conclusion, the most used fluorescent tracers of the Normandy karstic chalk and their artificial and natural degradation byproducts do not exhibit significant toxicity to humans and the aquatic environment, at the concentrations generally noted at the restitution points.

  12. Utilization of Biodiesel By-Products for Biogas Production

    Science.gov (United States)

    Kolesárová, Nina; Hutňan, Miroslav; Bodík, Igor; Špalková, Viera

    2011-01-01

    This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered. PMID:21403868

  13. Remote handling equipment for laboratory research of fuel reprocessing in Nuclear Research Institute at Rez

    International Nuclear Information System (INIS)

    Fidler, J.; Novy, P.; Kyrs, M.

    1985-04-01

    Laboratory installations were developed for two nuclear fuel reprocessing methods, viz., the solvent extraction process and the fluoride volatility process. The apparatus for solvent extraction reprocessing consists of a pneumatically driven rod-chopper, a dissolver, mixer-settler extractors, an automatic fire extinguishing device and other components and it was tested using irradiated uranium. The technological line for the fluoride volatility process consists of a fluorimater, condensers, sorption columns with NaF pellets and a distillation column for the separation of volatile fluorides from UF 6 . The line has not yet been tested using irradiated fuel. Some features of the remote handling equipment of both installations are briefly described. (author)

  14. Environmental aspects of nuclear power

    International Nuclear Information System (INIS)

    Feates, F.

    1981-01-01

    The subject is discussed under the headings: background (scope of paper is a consideration of the radioactive by-products that arise from normal operation of nuclear power generating facilities; how regulated and their relative significance); legislation and regulation; the fuel cycle - fuel fabrication; use (of the fuel in the reactor; wastes from a typical CEGB Magnox power station); reprocessing (wastes from reprocessing); other wastes; disposal (including sea disposal). (U.K.)

  15. Ecotoxicological assessment of TiO{sub 2} byproducts on the earthworm Eisenia fetida

    Energy Technology Data Exchange (ETDEWEB)

    Bigorgne, Emilie, E-mail: emilie.bigorgne@umail.univ-metz.fr [Laboratoire Interactions Ecotoxicite, Biodiversite, Ecosystemes, Universite Paul Verlaine - Metz, CNRS UMR 7146, Rue du General Delestraint, 57070 Metz (France); Foucaud, Laurent [Laboratoire Interactions Ecotoxicite, Biodiversite, Ecosystemes, Universite Paul Verlaine - Metz, CNRS UMR 7146, Rue du General Delestraint, 57070 Metz (France); Lapied, Emmanuel [Bioforsk, Soil and Environment, Fredrik A. Dahls vei 20, N-1432 Aas (Norway); Labille, Jerome; Botta, Celine [CEREGE UMR 6635 CNRS/Aix-Marseille Universite, Europole de l' Arbois, 13545 Aix-en-Provence (France); International Consortium for the Environmental Implications of Nanotechnology iCEINT, Europole de l' Arbois, 13545 Aix en Provence (France); Sirguey, Catherine [Nancy Universite, INPL/INRA, UMR 1120, Laboratoire Sols et Environnement, BP 172-2, Avenue de la foret de Haye, F-54505 Vandoeuvre-les-Nancy Cedex (France); Falla, Jairo [Laboratoire Interactions Ecotoxicite, Biodiversite, Ecosystemes, Universite Paul Verlaine - Metz, CNRS UMR 7146, Rue du General Delestraint, 57070 Metz (France); Rose, Jerome [CEREGE UMR 6635 CNRS/Aix-Marseille Universite, Europole de l' Arbois, 13545 Aix-en-Provence (France); International Consortium for the Environmental Implications of Nanotechnology iCEINT, Europole de l' Arbois, 13545 Aix en Provence (France); Joner, Erik J. [Nancy Universite, INPL/INRA, UMR 1120, Laboratoire Sols et Environnement, BP 172-2, Avenue de la foret de Haye, F-54505 Vandoeuvre-les-Nancy Cedex (France); Rodius, Francois; Nahmani, Johanne [Laboratoire Interactions Ecotoxicite, Biodiversite, Ecosystemes, Universite Paul Verlaine - Metz, CNRS UMR 7146, Rue du General Delestraint, 57070 Metz (France)

    2011-10-15

    The increasing production of nanomaterials will in turn increase the release of nanosized byproducts to the environment. The aim of this study was to evaluate the behaviour, uptake and ecotoxicity of TiO{sub 2} byproducts in the earthworm Eisenia fetida. Worms were exposed to suspensions containing 0.1, 1 and 10 mg/L of byproducts for 24 h. Size of TiO{sub 2} byproducts showed aggregation of particles up to 700 {mu}m with laser diffraction. Only worms exposed at 10 mg/L showed bioaccumulation of titanium (ICP-AES), increasing expression of metallothionein and superoxide dismutase mRNA (Real-time PCR) and induction of apoptotic activity (Apostain and TUNEL). TiO{sub 2} byproducts did not induce cytotoxicity on coelomocytes, but a significant decrease of phagocytosis was observed starting from 0.1 mg/L. In conclusion, bioaccumulation of byproducts and their production of reactive oxygen species could be responsible for the alteration of the antioxidant system in worms. - Highlights: > Aggregation of TiO{sub 2} byproducts up to 700 {mu}m in the medium of exposure. > Bioaccumulation of titanium in worms exposed at 10 mg/L of TiO{sub 2} byproducts. > Increasing expression of metallothionein and superoxide dismutase mRNA. > Induction of apoptotic activity in worms exposed at 10 mg/L of TiO{sub 2} byproducts. > Decrease of coelomocytes phagocytosis starting from 0.1 mg/L of TiO{sub 2} byproducts. - A short time exposure to TiO{sub 2} byproducts can induce sublethal effects on the earthworm, Eisenia fetida.

  16. Clean coal technology. Coal utilisation by-products

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-08-15

    The need to remove the bulk of ash contained in flue gas from coal-fired power plants coupled with increasingly strict environmental regulations in the USA result in increased generation of solid materials referred to as coal utilisation by-products, or CUBs. More than 40% of CUBs were sold or reused in the USA in 2004 compared to less than 25% in 1996. A goal of 50% utilization has been established for 2010. The American Coal Ash Association (ACCA) together with the US Department of Energy's Power Plant Improvement Initiative (PPPI) and Clean Coal Power Initiative (CCPI) sponsor a number of projects that promote CUB utilization. Several are mentioned in this report. Report sections are: Executive summary; Introduction; Where do CUBs come from?; Market analysis; DOE-sponsored CUB demonstrations; Examples of best-practice utilization of CUB materials; Factors limiting the use of CUBs; and Conclusions. 14 refs., 1 fig., 5 tabs., 14 photos.

  17. Wastes and by-products - alternatives for agricultural use

    International Nuclear Information System (INIS)

    Boles, J.L.; Craft, D.J.; Parker, B.R.

    1994-01-01

    Top address a growing national problem with generation of wastes and by-products, TVA has been involved for several years with developing and commercializing environmentally responsible practices for eliminating, minimizing, or utilizing various wastes/by-products. In many cases, reducing waste generation is impractical, but the wastes/by-products can be converted into other environmentally sound products. In some instances, conversion of safe, value-added agricultural products in the best or only practical alternative. TVA is currently involved with a diversity of projects converting wastes/by-products into safe, economical, and agriculturally beneficial products. Environmental improvement projects have involved poultry litter, cellulosic wastes, used battery acid, ammonium sulfate fines, lead smelting effluents, deep-welled sulfuric acid/ammonium bisulfate solutions, wood ash, waste magnesium ammonium sulfate slurry from recording tape production, and ammunition plant waste sodium nitrate/ammonium nitrate streams

  18. Valorization of cereal based biorefinery byproducts: reality and expectations.

    Science.gov (United States)

    Elmekawy, Ahmed; Diels, Ludo; De Wever, Heleen; Pant, Deepak

    2013-08-20

    The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process.

  19. Recent trends in bioethanol production from food processing byproducts.

    Science.gov (United States)

    Akbas, Meltem Yesilcimen; Stark, Benjamin C

    2016-11-01

    The widespread use of corn starch and sugarcane as sources of sugar for the production of ethanol via fermentation may negatively impact the use of farmland for production of food. Thus, alternative sources of fermentable sugars, particularly from lignocellulosic sources, have been extensively investigated. Another source of fermentable sugars with substantial potential for ethanol production is the waste from the food growing and processing industry. Reviewed here is the use of waste from potato processing, molasses from processing of sugar beets into sugar, whey from cheese production, byproducts of rice and coffee bean processing, and other food processing wastes as sugar sources for fermentation to ethanol. Specific topics discussed include the organisms used for fermentation, strategies, such as co-culturing and cell immobilization, used to improve the fermentation process, and the use of genetic engineering to improve the performance of ethanol producing fermenters.

  20. Chlorine dioxine DBPs (disinfection by-products in drinking water

    Directory of Open Access Journals (Sweden)

    C. Lasagna

    2013-01-01

    Full Text Available Since the 1970s it has been well known that, though water for human consumption is generally disinfected before being distributed along the network, the use of chemicals results in the formation of many different Disinfection By-Products (DBPs. In the case of chlorine dioxide, the most important and represented DBPs are chlorite and chlorate: after an introduction concerning the current Italian regulation on this subject, in the experimental part the results of a 7-year minitoring campaign, concerning water of different origin collected from taps in various Italian regions, are shown. The analytical technique used for the determination of chlorite and chlorate was Ion Chromatography. The result obtained are finally discussed.

  1. Nutritional evaluation of irradiated animal protein by-products

    International Nuclear Information System (INIS)

    El-Hakeim, N.F.; Hilali, E.A.

    1991-01-01

    Blood, fish and meat-bone meals were irradiated at dose levels of 0, 5, 10, 20 and 50 kGy. Radiation induced an insignificant effect on the chemical composition of meals. Available lysine in irradiated fish meals was reduced by 8,04%. Losses occurred in some amino acids especially the essential ones of the irradiated protein by-products. Isoleucine, phenylalanine and valine were the limiting amino acids in the irradiated blood, fish and meat-bone meal, respectively. At dose levels of 0, 5, 10, 20 and 50 kGy essential amino acids index (EAAI) was 48,24%, 42,89%, 48,38%, 53% and 55,95% for blood meal 37,91%, 39,71%, 41,18% and 37,90% for fish meal and 37,07%, 36,01%, 27,61%, 38,21% and 38,45% for meat-bone meal, respectively. (orig.) [de

  2. Asparagus byproducts as a new source of peroxidases.

    Science.gov (United States)

    Jaramillo-Carmona, Sara; Lopez, Sergio; Vazquez-Castilla, Sara; Rodriguez-Arcos, Rocio; Jimenez-Araujo, Ana; Guillen-Bejarano, Rafael

    2013-07-03

    Soluble peroxidase (POD) from asparagus byproducts was purified by ion exchange chromatographies, and its kinetic and catalytic properties were studied. The isoelectric point of the purified isoperoxidases was 9.1, and the optimum pH and temperature values were 4.0 and 25 °C, respectively. The cationic asparagus POD (CAP) midpoint inactivation temperature was 57 °C, which favors its use in industrial processes. The Km values of cationic asparagus POD for H₂O₂ and ABTS were 0.318 and 0.634 mM, respectively. The purified CAP is economically obtained from raw materials using a simple protocol and possesses features that make it advantageous for the potential use of this enzyme in a large number of processes with demonstrated requirements of thermostable POD. The results indicate that CAP can be used as a potential candidate for removing phenolic contaminants.

  3. Characterization of by-products from the Coolside process

    International Nuclear Information System (INIS)

    Wong, A.S.; Thomas, G.A.; Schram, W.H.; Givens, E.N.; Robertson, J.D.

    1993-01-01

    Coolside is a flexible dry flue gas desulfurization process for removal of SO 2 from coal fired power plants emissions. Hydrated lime is pneumatically injected dry into the power plant duct work on the cool side of the air preheater. The flue gas stream is then humidified to within about 20--30 F of adiabatic saturation by spraying atomized water. A critical component of the Coolside process is the addition of a promoter to the water spray to enhance SO 2 capture efficiency. In general, sodium based compounds have been found to be the most effective promoters, although chloride salts have also been shown to be effective if added during lime hydration. The Coolside technology was successfully demonstrated at the Ohio Edison Edgewater Plant as part of a US DOE supported US EPA demonstration program. The test lasted from July 1989 through February 1990 and had two primary goals. First, to achieve overall SO 2 reductions of 30%, 50%, and 70%. Second, to achieve reliable process operations at 20 and 25 F approach to adiabatic saturation. The demonstration was considered successful. The Coolside solids differ from other dry scrubber wastes in that the residual lime is hydrated and from other low temperature scrubbing wastes in that the sorbent activator, NaOH in this case, introduces significant quantities of sodium compounds in the waste. Sixty-five tons of the waste were collected during the demonstration runs in February 1990 in order to assess the environmental impact of the by-product through a series of field lysimeter and laboratory column leaching studies. In the first phase of this assessment, approximately 400 samples of the by-product material have been analyzed for the major, minor, and trace elements by the ultimate and proximate analysis, X-ray fluorescence, and PIXE/PIGE analysis. The results of these analyses and the unique chemistry of the Coolside solids as a function of processing variables is presented in this paper

  4. Heat transfer measurements in a forced convection loop with two molten-fluoride salts: LiF--BeF2--ThF2--UF4 and eutectic NaBF4--NaF

    International Nuclear Information System (INIS)

    Silverman, M.D.; Huntley, W.R.; Robertson, H.E.

    1976-10-01

    Heat transfer coefficients were determined experimentally for two molten-fluoride salts [LiF-BeF 2 -ThF 2 -UF 4 (72-16-12-0.3 mole %) and NaBF 4 -NaF (92-8 mole %] proposed as the fuel salt and coolant salt, respectively, for molten-salt breeder reactors. Information was obtained over a wide range of variables, with salt flowing through 12.7-mm-OD (0.5-in.) Hastelloy N tubing in a forced convection loop (FCL-2b). Satisfactory agreement with the empirical Sieder-Tate correlation was obtained in the fully developed turbulent region at Reynolds moduli above 15,000 and with a modified Hausen equation in the extended transition region (Re approx.2100-15,000). Insufficient data were obtained in the laminar region to allow any conclusions to be drawn. These results indicate that the proposed salts behave as normal heat transfer fluids with an extended transition region

  5. Thermodynamic optimization of the (Na2O + SiO2 + NaF + SiF4) reciprocal system using the Modified Quasichemical Model in the Quadruplet Approximation

    International Nuclear Information System (INIS)

    Lambotte, Guillaume; Chartrand, Patrice

    2011-01-01

    Highlights: → We model the Na 2 O-SiO 2 -NaF-SiF 4 reciprocal system based on a comprehensive review of all available experimental data. → The assessment includes Na 2 O-SiO 2 and NaF-SiF 4 binary systems. → Improvements to the Modified Quasichemical Model in the Quadruplet Approximation are presented. → The very strong short-range ordering among first-nearest and second-nearest neighbors in this system is reproduced. → This work constitutes the first assessment for all compositions and temperatures of a reciprocal oxyfluoride system. - Abstract: All available thermodynamic and phase diagram data for the condensed phases of the ternary reciprocal system (NaF + SiF 4 + Na 2 O + SiO 2 ) have been critically assessed. Model parameters for the unary (SiF 4 ), the binary systems and the ternary reciprocal system have been found, which permit to reproduce the most reliable experimental data. The Modified Quasichemical Model in the Quadruplet Approximation was used for the oxyfluoride liquid solution, which exhibits strong first-nearest-neighbor and second-nearest-neighbor short-range ordering. This thermodynamic model takes into account both types of short-range ordering as well as the coupling between them. Model parameters have been estimated for the hypothetical high-temperature liquid SiF 4 .

  6. Hazard Analysis and identification of Critical Control Points of collagen extraction from cod by-products

    NARCIS (Netherlands)

    Aalberts, C.H.J.

    2004-01-01

    The aim of the European research project “UTILISATION AND STABILISATION OF BY-PRODUCTS FROM COD SPECIES” (QLK1-CT-2000-01017 QLRT-2001-02829) is to investigate whether collagen from fish by-products could serve as an important raw material in high quality food. Since Atlantic cod is a major

  7. In situ ruminal crude protein degradability of by-products from cereals, oilseeds and animal origin

    NARCIS (Netherlands)

    Habib, G.; Khan, N.A.; Ali, M.; Bezabih, M.

    2013-01-01

    The aim of this study was to establish a database on in situ ruminal crude protein (CP) degradability characteristics of by-products from cereal grains, oilseeds and animal origin commonly fed to ruminants in Pakistan and South Asian Countries. The oilseed by-products were soybean meal, sunflower

  8. Nutritional diversity of agricultural and agro-industrial by-products for ruminant feeding

    Directory of Open Access Journals (Sweden)

    J.A.G. Azevêdo

    2012-10-01

    Full Text Available Fifty-seven by-products were collected from regions throughout Brazil. Chemical composition, in vitro neutral detergent fiber digestibility (IVNDFD, and total digestible nutrients (TDN were determined with the objective of grouping by-products with similar nutritional characteristics. The by-products belonging to group one (G1 presented the highest content of neutral detergent fiber exclusive of ash and nitrogenous compounds [aNDFom(n] and lowest energy content, with 42.5% and 38.8% of IVNDFD and TDN, respectively. A new cluster analysis was carried in order to better characterize G2 by-products, six subgroups (SGs were established (SG1 to SG6. SG1 by-products had the highest and the lowest values for lignin and TDN, respectively. SG2 by-products had the highest aNDFom(n value, with TDN and IVNDFD values greater than 600 and 700g/kg, respectively, and crude protein (CP value below 200g/kg in dry matter (DM. Among all the subgroups, SG3 had the highest TDN (772g/kg and IVNDFD (934g/kg values and the lowest lignin (23g/kg in DM value. The ether extract was what most influenced the hierarchical establishment of residual grouping in SG4. SG5 by-products had the highest concentration of non-fibrous carbohydrate. Different from the other subgroups, SG6 by-products had the highest value of available CP.

  9. Effect of using different levels of pistachio by-products silage on ...

    African Journals Online (AJOL)

    Effect of using different levels of pistachio by-products silage on composition and blood parameters of Holstein dairy cows. ... The goal of this research was to study about the effect of using pistachio hulls silage in cow's nutrition. The initial ... Key words: Dairy cattle's, milk production, pistachio by-product, silage, tannin.

  10. Deoxygenation of benzoic acid on metal oxides. 2. Formation of byproducts.

    NARCIS (Netherlands)

    de Lange, M.W.; van Ommen, J.G.; Lefferts, Leonardus

    2002-01-01

    Benzene, benzophenone, toluene and benzylalcohol are byproducts in the selective deoxygenation of benzoic acid to benzaldehyde on ZnO and ZrO2. In this paper, the pathways to the byproducts are discussed and a complete overview of the reaction network is presented. Benzene and benzophenone are

  11. 40 CFR 63.302 - Standards for by-product coke oven batteries.

    Science.gov (United States)

    2010-07-01

    ... batteries. 63.302 Section 63.302 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... National Emission Standards for Coke Oven Batteries § 63.302 Standards for by-product coke oven batteries... oven emissions from each affected existing by-product coke oven battery that exceed any of the...

  12. Improvement in the nutritive quality of cassava and its by-products ...

    African Journals Online (AJOL)

    A review of the extent of fermentation of cassava and its by-products was made in order to highlight the role played by fermentation on the bio-conversion of cassava and cassava by-products for improved nutrient quality. The reasons for cassava products fermentation mentioned were synonymous with the reasons ...

  13. Ecotoxicity of ketoprofen, diclofenac, atenolol and their photolysis byproducts in zebrafish (Danio rerio)

    Energy Technology Data Exchange (ETDEWEB)

    Diniz, M.S., E-mail: mesd@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Salgado, R., E-mail: r.salgado@campus.fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); ESTS-IPS, Escola Superior de Tecnologia de Setúbal do Instituto Politécnico de Setúbal, Rua Vale de Chaves, Campus do IPS, Estefanilha, 2910-761 Setúbal (Portugal); Pereira, V.J., E-mail: vanessap@itqb.unl.pt [Instituto de Biologia Experimental e Tecnológica (IBET), Av. da República (EAN), 2784-505 Oeiras (Portugal); Instituto de Tecnologia Química e Biológica (ITQB)—Universidade Nova de Lisboa (UNL), Estação Agronómica Nacional, Av. da República, 2780-157 Oeiras (Portugal); Carvalho, G., E-mail: gs.carvalho@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Instituto de Biologia Experimental e Tecnológica (IBET), Av. da República (EAN), 2784-505 Oeiras (Portugal); Oehmen, A., E-mail: a.oehmen@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Reis, M.A.M., E-mail: amr@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Noronha, J.P., E-mail: jpnoronha@fct.unl.pt [REQUIMTE/CQFB, Chemistry Department, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal)

    2015-02-01

    The occurrence of pharmaceutical compounds in wastewater treatment plants and surface waters has been detected worldwide, constituting a potential risk for aquatic ecosystems. Adult zebrafish, of both sexes, were exposed to three common pharmaceutical compounds (atenolol, ketoprofen and diclofenac) and their UV photolysis by-products over seven days. The results show that diclofenac was removed to concentrations < LOD after 5 min of UV irradiation. The oxidative stress response of zebrafish to pharmaceuticals and their photolysis by-products was evaluated through oxidative stress enzymes (glutathione-S-transferase, catalase, superoxide dismutase) and lipid peroxidation. Results suggest that the photolysis by-products of diclofenac were more toxic than those from the other compounds tested, showing an increase in GST and CAT levels, which are also supported by higher MDA levels. Overall, the toxicity of waters containing atenolol and ketoprofen was reduced after the parent compounds were transformed by photolysis, whereas the toxicity increased significantly from the by-products generated through diclofenac photolysis. Therefore, diclofenac photolysis would possibly necessitate higher irradiation time to ensure that the associated by-products are completely degraded to harmless form(s). - Highlights: • Toxicity evaluated for 3 common pharmaceuticals (atenolol, ketoprofen and diclofenac). • Toxicity assessed for the pharmaceuticals and UV photolysis by-products in zebrafish. • Diclofenac photolysis by-products are more toxic than the parent compound. • Ketoprofen and atenolol show stronger oxidative stress response than by-products. • UV photolysis should ensure full removal of diclofenac metabolites to avoid toxicity.

  14. Ecotoxicity of ketoprofen, diclofenac, atenolol and their photolysis byproducts in zebrafish (Danio rerio)

    International Nuclear Information System (INIS)

    Diniz, M.S.; Salgado, R.; Pereira, V.J.; Carvalho, G.; Oehmen, A.; Reis, M.A.M.; Noronha, J.P.

    2015-01-01

    The occurrence of pharmaceutical compounds in wastewater treatment plants and surface waters has been detected worldwide, constituting a potential risk for aquatic ecosystems. Adult zebrafish, of both sexes, were exposed to three common pharmaceutical compounds (atenolol, ketoprofen and diclofenac) and their UV photolysis by-products over seven days. The results show that diclofenac was removed to concentrations < LOD after 5 min of UV irradiation. The oxidative stress response of zebrafish to pharmaceuticals and their photolysis by-products was evaluated through oxidative stress enzymes (glutathione-S-transferase, catalase, superoxide dismutase) and lipid peroxidation. Results suggest that the photolysis by-products of diclofenac were more toxic than those from the other compounds tested, showing an increase in GST and CAT levels, which are also supported by higher MDA levels. Overall, the toxicity of waters containing atenolol and ketoprofen was reduced after the parent compounds were transformed by photolysis, whereas the toxicity increased significantly from the by-products generated through diclofenac photolysis. Therefore, diclofenac photolysis would possibly necessitate higher irradiation time to ensure that the associated by-products are completely degraded to harmless form(s). - Highlights: • Toxicity evaluated for 3 common pharmaceuticals (atenolol, ketoprofen and diclofenac). • Toxicity assessed for the pharmaceuticals and UV photolysis by-products in zebrafish. • Diclofenac photolysis by-products are more toxic than the parent compound. • Ketoprofen and atenolol show stronger oxidative stress response than by-products. • UV photolysis should ensure full removal of diclofenac metabolites to avoid toxicity

  15. Pilot program to assess proposed basic quality assurance requirements in the medical use of byproduct materials

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, E.; Nelson, K.; Meinhold, C.B. (Brookhaven National Lab., Upton, NY (United States))

    1991-10-01

    In January 1990, the Nuclear Regulatory Commission (NRC) proposed amendments to 10 CFR Part 35 that would require medical licensees using byproduct material to establish and implement a basic quality assurance program. A 60-day real-world trial of the proposed rules was initiated to obtain information beyond that generally found through standard public comment procedures. Volunteers from randomly selected institutions had opportunities to review the details of the proposed regulations and to implement these rules on a daily basis during the trial. The participating institutions were then asked to evaluate the proposed regulations based on their personal experiences. The pilot project sought to determine whether medical institutions could develop written quality assurance programs that would meet the eight performance-based objectives of proposed Section 35.35. In addition, the NRC wanted to learn from these volunteers if they had any recommendations on how the rule could be revised to minimized its cost and to clarify its objectives without decreasing its effectiveness. It was found that licensees could develop acceptable QA programs under a performance-based approach, that most licensee programs did meet the proposed objectives, and that most written QA plans would require consultations with NRC or Agreement State personnel before they would fully meet all objectives of proposed Section 35.35. This report describes the overall pilot program. The methodology used to select and assemble the group of participating licensees is presented. The various workshops and evaluation questionnaires are discussed, and detailed findings are presented. 7 refs.

  16. Pilot program to assess proposed basic quality assurance requirements in the medical use of byproduct materials

    International Nuclear Information System (INIS)

    Kaplan, E.; Nelson, K.; Meinhold, C.B.

    1991-10-01

    In January 1990, the Nuclear Regulatory Commission (NRC) proposed amendments to 10 CFR Part 35 that would require medical licensees using byproduct material to establish and implement a basic quality assurance program. A 60-day real-world trial of the proposed rules was initiated to obtain information beyond that generally found through standard public comment procedures. Volunteers from randomly selected institutions had opportunities to review the details of the proposed regulations and to implement these rules on a daily basis during the trial. The participating institutions were then asked to evaluate the proposed regulations based on their personal experiences. The pilot project sought to determine whether medical institutions could develop written quality assurance programs that would meet the eight performance-based objectives of proposed Section 35.35. In addition, the NRC wanted to learn from these volunteers if they had any recommendations on how the rule could be revised to minimized its cost and to clarify its objectives without decreasing its effectiveness. It was found that licensees could develop acceptable QA programs under a performance-based approach, that most licensee programs did meet the proposed objectives, and that most written QA plans would require consultations with NRC or Agreement State personnel before they would fully meet all objectives of proposed Section 35.35. This report describes the overall pilot program. The methodology used to select and assemble the group of participating licensees is presented. The various workshops and evaluation questionnaires are discussed, and detailed findings are presented. 7 refs

  17. Liming efficacy and transport in soil of a dry PFBC by-product

    International Nuclear Information System (INIS)

    Dick, W.A.

    1995-01-01

    The by-products of pressurized fluidized-bed combustion (PFBC) systems are mixtures of coal ash, anhydrite (CaSO 4 ), and unspent alkaline sorbent. Because PFBC by-products are alkaline and contain large concentrations of readily soluble bases (Ca and in some cases Mg) and other essential plant nutrients such as S and K, they have potential use as soil amendments, especially in acidic soils. PFBC by-products (particularly those with large Mg contents) may cause excessively high soluble salt concentrations when applied to soil. This could be detrimental to plant growth and might also impact the release of trace elements from the coal ash component of the by-product. In field experiments on three acidic soils, the liming effectiveness of a PFBC by-product, its effects on corn and alfalfa growth, and its impacts on crop, soil, and water quality were investigated

  18. Peptides from Fish By-product Protein Hydrolysates and Its Functional Properties: an Overview.

    Science.gov (United States)

    Zamora-Sillero, Juan; Gharsallaoui, Adem; Prentice, Carlos

    2018-04-01

    The inadequate management of fish processing waste or by-products is one of the major problems that fish industry has to face nowadays. The mismanagement of this raw material leads to economic loss and environmental problems. The demand for the use of these by-products has led to the development of several processes in order to recover biomolecules from fish by-products. An efficient way to add value to fish waste protein is protein hydrolysis. Protein hydrolysates improve the functional properties and allow the release of peptides of different sizes with several bioactivities such as antioxidant, antimicrobial, antihypertensive, anti-inflammatory, or antihyperglycemic among others. This paper reviews different methods for the production of protein hydrolysates as well as current research about several fish by-products protein hydrolysates bioactive properties, aiming the dual objective: adding value to these underutilized by-products and minimizing their negative impact on the environment.

  19. By-product formation in repetitive PCR amplification of DNA libraries during SELEX.

    Science.gov (United States)

    Tolle, Fabian; Wilke, Julian; Wengel, Jesper; Mayer, Günter

    2014-01-01

    The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target-recognizing aptamers. Little is known about the formation of such by-products when employing nucleic acid libraries as templates. We report on the formation of two different forms of by-products, named ladder- and non-ladder-type observed during repetitive amplification in the course of in vitro selection experiments. Based on sequence information and the amplification behaviour of defined enriched nucleic acid molecules we suppose a molecular mechanism through which these amplification by-products are built. Better understanding of these mechanisms might help to find solutions minimizing by-product formation and improving the success rate of aptamer selection.

  20. Local agro-industrial by-products with potential use in Ghanaian aquaculture: a review

    DEFF Research Database (Denmark)

    Obirikorang, Kwasi Adu; Amisah, Stephen; Fialor, Simon Cudjoe

    2015-01-01

    plant by-products for use in fish grow-out facilities, particularly in tilapia production, which accounts for over 80 % of aquaculture production. This review thus identifies local agro-industrial byproducts with potential use in fish feeds based on their nutritional composition, total annual production......, competition for and seasonal availability and dynamics of these products as well as prices. The effects of dietary inclusions of these by-products on fish growth and feed utilisation are also reviewed. Based on the published works and other practical information reviewed, these by-products represent huge...... regions of the world where these crops and their resulting by-products are produced in commercial quantities...

  1. Mango (Mangifera indica L.) by-products and their valuable components: a review.

    Science.gov (United States)

    Jahurul, M H A; Zaidul, I S M; Ghafoor, Kashif; Al-Juhaimi, Fahad Y; Nyam, Kar-Lin; Norulaini, N A N; Sahena, F; Mohd Omar, A K

    2015-09-15

    The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Video image processing for nuclear safeguards

    International Nuclear Information System (INIS)

    Rodriguez, C.A.; Howell, J.A.; Menlove, H.O.; Brislawn, C.M.; Bradley, J.N.; Chare, P.; Gorten, J.

    1995-01-01

    The field of nuclear safeguards has received increasing amounts of public attention since the events of the Iraq-UN conflict over Kuwait, the dismantlement of the former Soviet Union, and more recently, the North Korean resistance to nuclear facility inspections by the International Atomic Energy Agency (IAEA). The role of nuclear safeguards in these and other events relating to the world's nuclear material inventory is to assure safekeeping of these materials and to verify the inventory and use of nuclear materials as reported by states that have signed the nuclear Nonproliferation Treaty throughout the world. Nuclear safeguards are measures prescribed by domestic and international regulatory bodies such as DOE, NRC, IAEA, and EURATOM and implemented by the nuclear facility or the regulatory body. These measures include destructive and non destructive analysis of product materials/process by-products for materials control and accountancy purposes, physical protection for domestic safeguards, and containment and surveillance for international safeguards

  3. 40 CFR 415.330 - Applicability; description of the carbon monoxide and by-product hydrogen production subcategory.

    Science.gov (United States)

    2010-07-01

    ... carbon monoxide and by-product hydrogen production subcategory. 415.330 Section 415.330 Protection of... MANUFACTURING POINT SOURCE CATEGORY Carbon Monoxide and By-Product Hydrogen Production Subcategory § 415.330 Applicability; description of the carbon monoxide and by-product hydrogen production subcategory. The provisions...

  4. Carcass and non-carcass characteristics of sheep fed on annatto byproduct

    Directory of Open Access Journals (Sweden)

    Dorgival Morais de Lima Júnior

    2016-10-01

    Full Text Available Annatto byproduct is the residue from the extraction of powder dye that covers the seed pericarp; after processing, between 94% and 98% of the original product is considered a byproduct. The aim was to evaluate the influence of increasing levels of annatto byproduct on the components of sheep body weight. Thirty-two male sheep, not castrated, with initial weight of 23.17 ± 1.45 kg, without a defined breed, were used in randomized blocks in all four treatments (0, 100, 200 and 300 g kg?1 of annatto byproduct in the diet dry matter. The increase to 300 g kg?1 of annatto byproduct had a negative linear effect (P < 0.05 for hot carcass weight (kg and cold carcass weight (kg. Increasing levels of annatto byproduct resulted in a linear reduction (P < 0.05 for palette weight (kg, leg weight (kg, carcass compactness index (kg cm?1, liver weight (kg and skin weight (kg. The inclusion of annatto byproduct up to 200 g kg?1 of dry matter in sheep diets did not affect the components of sheep body weight.

  5. The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

    Directory of Open Access Journals (Sweden)

    Babatunde O. Alao

    2017-06-01

    Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

  6. Radiation sensitivity of foodborne pathogens in meat byproducts with different packaging

    International Nuclear Information System (INIS)

    Yong, Hae In; Kim, Hyun-Joo; Nam, Ki Chang; Kwon, Joong Ho; Jo, Cheorun

    2015-01-01

    The aim of this study was to determine radiation sensitivity of Escherichia coli O157:H7 and Listeria monocytogenes in edible meat byproducts. Seven beef byproducts (heart, liver, lung, lumen, omasum, large intestine, and small intestine) and four pork byproducts (heart, large intestine, liver, and small intestine) were used. Electron beam irradiation significantly reduced the numbers of pathogenic microorganisms in meat byproducts and no viable cells were detected in both aerobically- and vacuum-packaged samples irradiated at 4 kGy. Meat byproducts packed under vacuum had higher D 10 value than the ones packed aerobically. No significant difference was observed between the D 10 values of E. coli O157:H7 and L. monocytogenes inoculated in either aerobically or vacuum packaged samples. These results suggest that low-dose electron beam irradiation can significantly decrease microbial numbers and reduce the risk of meat byproduct contamination by the foodborne pathogens. - Highlights: • Radiation sensitivities of pathogens in meat byproduct were tested. • Electron beam irradiation of 3 or 4 kGy reduced pathogens by> 9 log • The D 10 values were lower in the aerobic-packaging than under vacuum condition

  7. Utilization of byproducts and waste materials from meat, poultry and fish processing industries: a review.

    Science.gov (United States)

    Jayathilakan, K; Sultana, Khudsia; Radhakrishna, K; Bawa, A S

    2012-06-01

    India is bestowed with vast livestock wealth and it is growing at the rate of 6% per annum. The contribution of livestock industry including poultry and fish is increasing substantially in GDP of country which accounts for >40% of total agricultural sector and >12% of GDP. This contribution would have been much greater had the animal by-products been also efficiently utilized. Efficient utilization of by-products has direct impact on the economy and environmental pollution of the country. Non-utilization or under utilization of by-products not only lead to loss of potential revenues but also lead to the added and increasing cost of disposal of these products. Non-utilization of animal by-products in a proper way may create major aesthetic and catastrophic health problems. Besides pollution and hazard aspects, in many cases meat, poultry and fish processing wastes have a potential for recycling raw materials or for conversion into useful products of higher value. Traditions, culture and religion are often important when a meat by-product is being utilized for food. Regulatory requirements are also important because many countries restrict the use of meat by-products for reasons of food safety and quality. By-products such as blood, liver, lung, kidney, brains, spleen and tripe has good nutritive value. Medicinal and pharmaceutical uses of by-product are also highlighted in this review. Waste products from the poultry processing and egg production industries must be efficiently dealt with as the growth of these industries depends largely on waste management. Treated fish waste has found many applications among with which the most important are animal feed, biodiesel/biogas, dietectic products (chitosan), natural pigments (after extraction) and cosmetics (collagen). Available information pertaining to the utilization of by-products and waste materials from meat, poultry and fish and their processing industries has been reviewed here.

  8. UTILIZATION OF LOW NOx COAL COMBUSTION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang; X. Huang; M.G. McKimpson; R.E. Tieder; A.M. Hein; J.M. Gillis; D.C. Popko; K.L. Paxton; Z. Li; X. Liu; X. Song; R.I. Kramer

    1998-12-01

    Low NO{sub x} combustion practices are critical for reducing NO{sub x} emissions from power plants. These low NO{sub x} combustion practices, however, generate high residual carbon contents in the fly ash produced. These high carbon contents threaten utilization of this combustion by-product. This research has successfully developed a separation technology to render fly ash into useful, quality-controlled materials. This technology offers great flexibility and has been shown to be applicable to all of the fly ashes tested (more than 10). The separated materials can be utilized in traditional fly ash applications, such as cement and concrete, as well as in nontraditional applications such as plastic fillers, metal matrix composites, refractories, and carbon adsorbents. Technologies to use beneficiated fly ash in these applications are being successfully developed. In the future, we will continue to refine the separation and utilization technologies to expand the utilization of fly ash. The disposal of more than 31 million tons of fly ash per year is an important environmental issue. With continued development, it will be possible to increase economic, energy and environmental benefits by re-directing more of this fly ash into useful materials.

  9. Bio-processing of agro-byproducts to animal feed.

    Science.gov (United States)

    Ajila, C M; Brar, S K; Verma, M; Tyagi, R D; Godbout, S; Valéro, J R

    2012-12-01

    Agricultural and food-industry residues constitute a major proportion (almost 30%) of worldwide agricultural production. These wastes mainly comprise lignocellulosic materials, fruit and vegetable wastes, sugar-industry wastes as well as animal and fisheries refuse and byproducts. Agro-residues are rich in many bioactive and nutraceutical compounds, such as polyphenolics, carotenoids and dietary fiber among others. Agro residues are a major valuable biomass and present potential solutions to problems of animal nutrition and the worldwide supply of protein and calories, if appropriate technologies can be used for their valorization by nutrient enrichment. Technologies available for protein enrichment of these wastes include solid substrate fermentation, ensiling, and high solid or slurry processes. Technologies to be developed for the reprocessing of these wastes need to take account of the peculiarities of individual wastes and the environment in which they are generated, reprocessed, and used. In particular, such technologies need to deliver products that are safe, not just for animal feed use, but also from the perspective of human feeding. This review focuses on the major current applications of solid-state fermentation in relation to the feed sector.

  10. Disinfection Methods for Swimming Pool Water: Byproduct Formation and Control

    Directory of Open Access Journals (Sweden)

    Huma Ilyas

    2018-06-01

    Full Text Available This paper presents a comprehensive and critical comparison of 10 disinfection methods of swimming pool water: chlorination, electrochemically generated mixed oxidants (EGMO, ultraviolet (UV irradiation, UV/chlorine, UV/hydrogen peroxide (H2O2, UV/H2O2/chlorine, ozone (O3/chlorine, O3/H2O2/chlorine, O3/UV and O3/UV/chlorine for the formation, control and elimination of potentially toxic disinfection byproducts (DBPs: trihalomethanes (THMs, haloacetic acids (HAAs, haloacetonitriles (HANs, trihaloacetaldehydes (THAs and chloramines (CAMs. The statistical comparison is carried out using data on 32 swimming pools accumulated from the reviewed studies. The results indicate that O3/UV and O3/UV/chlorine are the most promising methods, as the concentration of the studied DBPs (THMs and HANs with these methods was reduced considerably compared with chlorination, EGMO, UV irradiation, UV/chlorine and O3/chlorine. However, the concentration of the studied DBPs including HAAs and CAMs remained much higher with O3/chlorine compared with the limits set by the WHO for drinking water quality. Moreover, the enhancement in the formation of THMs, HANs and CH with UV/chlorine compared with UV irradiation and the increase in the level of HANs with O3/UV/chlorine compared with O3/UV indicate the complexity of the combined processes, which should be optimized to control the toxicity and improve the quality of swimming pool water.

  11. Predictive QSAR Models for the Toxicity of Disinfection Byproducts

    Directory of Open Access Journals (Sweden)

    Litang Qin

    2017-10-01

    Full Text Available Several hundred disinfection byproducts (DBPs in drinking water have been identified, and are known to have potentially adverse health effects. There are toxicological data gaps for most DBPs, and the predictive method may provide an effective way to address this. The development of an in-silico model of toxicology endpoints of DBPs is rarely studied. The main aim of the present study is to develop predictive quantitative structure–activity relationship (QSAR models for the reactive toxicities of 50 DBPs in the five bioassays of X-Microtox, GSH+, GSH−, DNA+ and DNA−. All-subset regression was used to select the optimal descriptors, and multiple linear-regression models were built. The developed QSAR models for five endpoints satisfied the internal and external validation criteria: coefficient of determination (R2 > 0.7, explained variance in leave-one-out prediction (Q2LOO and in leave-many-out prediction (Q2LMO > 0.6, variance explained in external prediction (Q2F1, Q2F2, and Q2F3 > 0.7, and concordance correlation coefficient (CCC > 0.85. The application domains and the meaning of the selective descriptors for the QSAR models were discussed. The obtained QSAR models can be used in predicting the toxicities of the 50 DBPs.

  12. Phenolic Compounds in the Potato and Its Byproducts: An Overview

    Science.gov (United States)

    Akyol, Hazal; Riciputi, Ylenia; Capanoglu, Esra; Caboni, Maria Fiorenza; Verardo, Vito

    2016-01-01

    The potato (Solanum tuberosum L.) is a tuber that is largely used for food and is a source of different bioactive compounds such as starch, dietary fiber, amino acids, minerals, vitamins, and phenolic compounds. Phenolic compounds are synthetized by the potato plant as a protection response from bacteria, fungi, viruses, and insects. Several works showed that these potato compounds exhibited health-promoting effects in humans. However, the use of the potato in the food industry submits this vegetable to different processes that can alter the phenolic content. Moreover, many of these compounds with high bioactivity are located in the potato’s skin, and so are eliminated as waste. In this review the most recent articles dealing with phenolic compounds in the potato and potato byproducts, along with the effects of harvesting, post-harvest, and technological processes, have been reviewed. Briefly, the phenolic composition, main extraction, and determination methods have been described. In addition, the “alternative” food uses and healthy properties of potato phenolic compounds have been addressed. PMID:27240356

  13. Tracing disinfection byproducts in full-scale desalination plants

    KAUST Repository

    Le Roux, Julien

    2015-03-01

    The aim of this study was to assess the formation and the behavior of halogenated byproducts (regulated THMs and HAAs, as well as nitrogenous, brominated and iodinated DBPs including the emerging iodo-THMs) along the treatment train of full-scale desalination plants. One thermal multi-stage flash distillation (MSF) plant and two reverse osmosis (RO) plants located on the Red Sea coast of Saudi Arabia. DBPs formed during the prechlorination step were efficiently removed along the treatment processes (MSF or RO). Desalination plants fed with good seawater quality and using intermittent chlorine injection did not show high DBP formation and discharge. One RO plant with a lower raw water quality and using continuous chlorination at the intake formed more DBPs. In this plant, some non-regulated DBPs (e.g., dibromoacetonitrile and iodo-THMs) reached the product water in low concentrations (< 1.5 μg/L). Regulated THMs and HAAs were far below their maximum contamination levels set by the US Environmental Protection Agency. Substantial amounts of DBPs are disposed to the sea; low concentrations of DBPs were indeed detected in the water on shore of the desalination plants.

  14. Torrefaction of residues and by-products from sunflower chain

    Directory of Open Access Journals (Sweden)

    G. Riva

    2013-09-01

    Full Text Available The high heterogeneity of some residual biomasses makes rather difficult their energy use and standardisation is a key aspect for these fuel products. Torrefaction is an interesting process used to improve the quality of ligno-cellulosic biomasses and to achieve standardisation. In the present study torrefaction has been employed on residues and by-products deriving from sunflower production chain, in particular sunflower stalks and oil press cake. The thermal behaviour of materials has been studied at first by thermo-gravimetric analysis in order to identify torrefaction temperatures range. Different residence time and torrefaction temperatures have been employed in a bench top torrefaction reactor afterwards. Analyses of raw and torrefied materials have been carried out to assess the influence of the process. As a consequence of torrefaction, the carbon and ash contents increase while the volatilisation range is reduced making the material more stable and standardised. Mass yield, energy yield and energy densification reach values of about 60 %, 80 % and 1.33 for sunflower stalks and 64 %, 85 % and 1.33 for sunflower oil press cake respectively. As highlighted by results, torrefaction is more interesting for sunflower stalks than oil cake and husks because of the different starting characteristics. Untreated oil cake and husks already show a good high heating value and the eventual torrefaction should be mild. On the contrary for sunflower stalks the process is more useful and could be more severe.

  15. Health impact of disinfection by-products in swimming pools

    Directory of Open Access Journals (Sweden)

    Cristina M. Villanueva

    2012-12-01

    Full Text Available This article is focused on the epidemiological evidence on the health impacts related to disinfection by-products (DBPs in swimming pools, which is a chemical hazard generated as an undesired consequence to reduce the microbial pathogens. Specific DBPs are carcinogenic, fetotoxic and/or irritant to the airways according to experimental studies. Epidemiological evidence shows that swimming in pools during pregnancy is not associated with an increased risk of reproductive outcomes. An epidemiological study suggested an increased risk of bladder cancer with swimming pool attendance, although evidence is inconclusive. A higher prevalence of respiratory symptoms including asthma is found among swimming pool workers and elite swimmers, although the causality of this association is unclear. The body of evidence in children indicates that asthma is not increased by swimming pool attendance. Overall, the available knowledge suggests that the health benefits of swimming outweigh the potential health risks of chemical contamination. However, the positive effects of swimming should be enhanced by minimising potential risks.

  16. Predictive QSAR Models for the Toxicity of Disinfection Byproducts.

    Science.gov (United States)

    Qin, Litang; Zhang, Xin; Chen, Yuhan; Mo, Lingyun; Zeng, Honghu; Liang, Yanpeng

    2017-10-09

    Several hundred disinfection byproducts (DBPs) in drinking water have been identified, and are known to have potentially adverse health effects. There are toxicological data gaps for most DBPs, and the predictive method may provide an effective way to address this. The development of an in-silico model of toxicology endpoints of DBPs is rarely studied. The main aim of the present study is to develop predictive quantitative structure-activity relationship (QSAR) models for the reactive toxicities of 50 DBPs in the five bioassays of X-Microtox, GSH+, GSH-, DNA+ and DNA-. All-subset regression was used to select the optimal descriptors, and multiple linear-regression models were built. The developed QSAR models for five endpoints satisfied the internal and external validation criteria: coefficient of determination ( R ²) > 0.7, explained variance in leave-one-out prediction ( Q ² LOO ) and in leave-many-out prediction ( Q ² LMO ) > 0.6, variance explained in external prediction ( Q ² F1 , Q ² F2 , and Q ² F3 ) > 0.7, and concordance correlation coefficient ( CCC ) > 0.85. The application domains and the meaning of the selective descriptors for the QSAR models were discussed. The obtained QSAR models can be used in predicting the toxicities of the 50 DBPs.

  17. Natural Radiation in byproducts of the production of phosphoric acid

    International Nuclear Information System (INIS)

    Silveira, Marcilei A. Guazzelli da; Cardoso, L.L.; Medina, N.H.

    2014-01-01

    Natural radiation is the largest source of radiation exposure to which man is subject. It is formed basically by cosmic radiation and the radionuclides present in the Earth crust, as 40 K and the elements of the decay series of 232 Th and 238 U. Phosphate ores, which constitutes the raw material for the production of phosphoric acid, have a high rate of natural radiation from the decay series of 232 Th and 238 U. Phosphogypsum, which is naturally radioactivity, is a by-product of the production of phosphoric acid by the wet method. For each ton of phosphoric acid it is produced about 4.5 tons of phosphogypsum. This work presents the analysis of samples collected in all stages of the manufacturing process of phosphoric acid, which generates the phosphogypsum. Gamma-ray spectrometry was used to measure the concentration of the elements of the decay series of 232 Th and 238 U. All analyzed samples showed a high concentration of radionuclides, promoting the need for further steps in the process in order to reduce the presence of such radionuclides in the phosphogypsum. The results indicate the radionuclide 238 U has higher contribution in some samples of the intermediate stages of the process. All samples exceeded the international average range of human exposure to terrestrial gamma radiation, which is 0.3 to 1.0 mSv/year. (author)

  18. Formation of trihalomethanes as disinfection byproducts in herbal spa pools.

    Science.gov (United States)

    Fakour, Hoda; Lo, Shang-Lien

    2018-04-09

    Herbal spa treatments are favorite recreational activities throughout the world. The water in spas is often disinfected to control pathogenic microorganisms and guarantee hygiene. However, chlorinated water may cause the formation of disinfection byproducts (DBPs). Although there have been many studies on DBP formation in swimming pools, the role of organic matter derived from herbal medicines applied in herbal spa water has been largely neglected. Accordingly, the present study investigated the effect of herbal medicines on the formation of trihalomethanes (THMs) in simulated herbal spa water. Water samples were collected from a spa pool, and then, disinfection and herbal addition experiments were performed in a laboratory. The results showed that the organic molecules introduced by the herbal medicines are significant precursors to the formation of THMs in spa pool water. Since at least 50% of THMs were produced within the first six hours of the reaction time, the presence of herbal medicines in spa water could present a parallel route for THM exposure. Therefore, despite the undeniable benefits of herbal spas, the effect of applied herbs on DBP formation in chlorinated water should be considered to improve the water quality and health benefits of spa facilities.

  19. Walnut (Juglans regia L.): genetic resources, chemistry, by-products.

    Science.gov (United States)

    Martínez, Marcela L; Labuckas, Diana O; Lamarque, Alicia L; Maestri, Damián M

    2010-09-01

    Walnut (Juglans regia L.) is the most widespread tree nut in the world. There is a great diversity of genotypes differing in forestry, productivity, physical and chemical nut traits. Some of them have been evaluated as promising and may serve as germplasm sources for breeding. The nutritional importance of the nut is related to the seed (kernel). It is a nutrient-dense food mainly owing to its oil content (up to 740 g kg(-1) in some commercial varieties), which can be extracted easily by screw pressing and consumed without refining. Walnut oil composition is dominated largely by unsaturated fatty acids (mainly linoleic together with lesser amounts of oleic and linolenic acids). Minor components of walnut oil include tocopherols, phospholipids, sphingolipids, sterols, hydrocarbons and volatile compounds. Phenolic compounds, present at high levels in the seed coat but poorly extracted with the oil, have been extensively characterised and found to possess strong antioxidant properties. The oil extraction residue is rich in proteins (unusually high in arginine, glutamic and aspartic acids) and has been employed in the formulation of various functional food products. This review describes current scientific knowledge concerning walnut genetic resources and composition as well as by-product obtainment and characteristics. Copyright 2010 Society of Chemical Industry.

  20. Energies and media nr 28. Uranium mining exploitations and residues. Uranium mines in Niger. Depleted uranium as a by-product of enrichment

    International Nuclear Information System (INIS)

    2009-02-01

    After some comments on recent events in the nuclear sector in different countries (USA, China, India, UK, Sweden, Italy and France), this publication addresses the issue of uranium mining exploitations and of their residues. It comments the radioactivity in mining areas, briefly discusses the issue of low doses, describes the uranium ore and its processing, indicates which are the various residues of the mining activity (sterile uncovered tailings, non exploitable mineralized rocks, ore and residue processing, residue radioactivity, mine closing down, witnesses on health in ancient mines). Some reflections are stated about uranium mines in Niger, and about depleted uranium as a by-product of the enrichment activity

  1. Integrated engineering and cost model for management of coal combustion byproducts

    Energy Technology Data Exchange (ETDEWEB)

    Sevim, H. [Department of Mining Engineering, Southern Illinois University at Carbondale, Carbondale, Illinois (United States); Renninger, S. [US Department of Energy, Morgantown Energy Technology Center, Morgantown, West Virginia (United States)

    1998-07-01

    An integrated engineering and cost model has been developed as a part of an overall research project for exploring the technical, environmental and economic feasibility of disposing coal combustion byproducts and flue gas desulfurisation products in underground coal mines in Illinois. The features of the model have been keyed in user-friendly software. In this paper, the purpose and the structure of the model are described. The capabilities of the software are illustrated through an example involving transportation of byproducts in containers from a power plant to a mine site, and subsequent placement of the byproducts in a abandoned underground coal mine using a hydraulic injection system. 3 refs.

  2. Potential contamination issues arising from the use of biofuel and food industry by-products in animal feed

    DEFF Research Database (Denmark)

    Granby, Kit; Mortensen, Alicja; Broesboel-Jensen, B.

    2012-01-01

    By-products are secondary or discarded products from manufacturing. Contamination of by-products used for feed may result in carryover to animal food products and hence have impact on either animal health or food safety. Feed by-products from bioethanol production include, for example, 'dried...... distillers grain' (DDG) and 'dried distillers grain with solubles' (DDGS) from generation bioethanol production, C5-molasses from generation bioethanol production and glycerol from biodiesel production. By-products from food industry may comprise discarded or downgraded food and food surplus or secondary...... products such as peels, pulpettes, molasses, whey, mask, oil cakes, etc. Contamination of by-products and possible impacts are presented....

  3. Beneficial uses of nuclear byproducts/sewage sludge irradiation project. Progress report, October 1982-March 1983

    International Nuclear Information System (INIS)

    Pierce, J.D.

    1984-11-01

    Gamma irradiation of various commodities in the Sandia Irradiator for Dried Sewage Solids (SIDSS) and the Gamma Irradiation Facility (GIF) continued during this reporting period. One truck-load of grapefruit was irradiated. Pelletized straw was irradiated to doses of 1, 5, 10, 20, and 40 megarads in SIDSS. Sludge, virus, and fungus samples were irradiated. Infected ground pork and infected pig carcasses were irradiated in the GIF as a method of Trichinella spiralis inactivation. Other experiments conducted in the GIF included irradiation of cut flowers to extend their shelf life and irradiation of kepone to induce its degradation. Waste Encapsulation and Storage Facility (WESF) capsule studies at ORNL and SNLA continued. A purchase order was placed for a prototype sludge solar dryer. Sewage Sludge Irradiation Transportation System (SSITS) cask activities included thermal stress analyses of cask performance following separation from the impact limiters during a fire. Analyses of cask performance, when loaded with six strontium-90 (Sr-90) capsules, also were done

  4. Tokamak reactor for treating fertile material or waste nuclear by-products

    Science.gov (United States)

    Kotschenreuther, Michael T.; Mahajan, Swadesh M.; Valanju, Prashant M.

    2012-10-02

    Disclosed is a tokamak reactor. The reactor includes a first toroidal chamber, current carrying conductors, at least one divertor plate within the first toroidal chamber and a second chamber adjacent to the first toroidal chamber surrounded by a section that insulates the reactor from neutrons. The current carrying conductors are configured to confine a core plasma within enclosed walls of the first toroidal chamber such that the core plasma has an elongation of 1.5 to 4 and produce within the first toroidal chamber at least one stagnation point at a perpendicular distance from an equatorial plane through the core plasma that is greater than the plasma minor radius. The at least one divertor plate and current carrying conductors are configured relative to one another such that the current carrying conductors expand the open magnetic field lines at the divertor plate.

  5. Beneficial uses of nuclear byproducts/sewage sludge irradiation project. Progress report, October 1981-March 1982

    International Nuclear Information System (INIS)

    Zak, B.D.

    1982-12-01

    A cooperative agreement was made between Albuquerque and DOE during FY81 for sewage sludge irradiation in upgrading the sewage treatment facilities. Other potential sites for implementation of sludge irradiation technology were also considered. Sludge was irradiated in the SIDSS for agronomy and animal feeding experiments. Sludge was also irradiated for use on turf areas. Cooperative work was also performed on grapefruit irradiation for fruit fly disinfestation, and on irradiation of sugar cane waste (bagasse) for enhanced ruminant digestibility. Preliminary design work began on a shipping cask to accomodate WESF Cs-137 capsules. The shielding performance, steady-state thermal response, and response to specified regulatory accident sequences have been evaluated. Work has been initiated on pathogen survival and post-irradiation pathogen behavior. Agronomy field, greenhouse, and soil chemistry studies continue. Various field experiments are ongoing. The fifth year of a five-year program to evaluate the potential use of a sludge product as a range feed supplement for cows is now in its fifth year. In agricultural economics, a preliminary marketing plan has been prepared for Albuquerque

  6. ANALYTICAL METHODS FOR WATER DISINFECTION BY-PRODUCTS IN FOODS AND BEVERAGES

    Science.gov (United States)

    The determination of exposure to drinking water disinfection byproducts (DBPs) requires an understanding of how drinking waters come into contact with the human through multiple pathways. The most significant pathway is the ingestion of drinking water. However, ingestion can oc...

  7. SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

  8. Characterization of polyphenols and antioxidant potential of white grape pomace byproducts (Vitis vinifera L.).

    Science.gov (United States)

    González-Centeno, María Reyes; Jourdes, Michael; Femenia, Antoni; Simal, Susana; Rosselló, Carmen; Teissedre, Pierre-Louis

    2013-11-27

    A detailed assessment of the total phenolic and total tannin contents, the monomeric and oligomeric flavan-3-ol composition, the proanthocyanidin profile, and the antioxidant potential of the grape pomace byproducts (considered as a whole, both skins and seeds), derived from four white grape varieties (Vitis vinifera L.), was performed. Significant differences (p grape pomace byproducts were observed among the different grape varieties studied. For the first time in the literature, the particular flavan-3-ol composition of the four grape varieties investigated was described for the whole fraction of their grape pomace byproducts. The phenolic composition and antioxidant capacity of grape pomaces were compared to those of their corresponding stems. The global characterization of these white grape varieties provided a basis for an integrated exploitation of both winemaking byproducts as potential, inexpensive, and easily available sources of bioactive compounds for the pharmaceutical, cosmetic, and food industries.

  9. Developing a byproduct materials information system for the Kentucky Transportation Cabinet.

    Science.gov (United States)

    2007-09-01

    Kentucky has numerous coal-fired, electric generating facilities and, as a result, there are abundant byproduct materials being produced from these facilities that have environmental, engineering, and economic potential as materials for use in common...

  10. DEVELOPMENT OF ACTIVATED CARBONS FROM COAL COMBUSTION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    Harold H. Schobert; M. Mercedes Maroto-Valer; Zhe Lu

    2003-09-30

    The increasing role of coal as a source of energy in the 21st century will demand environmental and cost-effective strategies for the use of coal combustion by-products (CCBPs), mainly unburned carbon in fly ash. Unburned carbon is nowadays regarded as a waste product and its fate is mainly disposal, due to the present lack of efficient routes for its utilization. However, unburned carbon is a potential precursor for the production of adsorbent carbons, since it has gone through a devolatilization process while in the combustor, and therefore, only requires to be activated. Accordingly, the principal objective of this work was to characterize and utilize the unburned carbon in fly ash for the production of activated carbons. The unburned carbon samples were collected from different combustion systems, including pulverized utility boilers, a utility cyclone, a stoker, and a fluidized bed combustor. LOI (loss-on-ignition), proximate, ultimate, and petrographic analyses were conducted, and the surface areas of the samples were characterized by N2 adsorption isotherms at 77K. The LOIs of the unburned carbon samples varied between 21.79-84.52%. The proximate analyses showed that all the samples had very low moisture contents (0.17 to 3.39 wt %), while the volatile matter contents varied between 0.45 to 24.82 wt%. The elemental analyses show that all the unburned carbon samples consist mainly of carbon with very little hydrogen, nitrogen, sulfur and oxygen In addition, the potential use of unburned carbon as precursor for activated carbon (AC) was investigated. Activated carbons with specific surface area up to 1075m{sup 2}/g were produced from the unburned carbon. The porosity of the resultant activated carbons was related to the properties of the unburned carbon feedstock and the activation conditions used. It was found that not all the unburned carbon samples are equally suited for activation, and furthermore, their potential as activated carbons precursors could be

  11. Nuclear law - Nuclear safety

    International Nuclear Information System (INIS)

    Pontier, Jean-Marie; Roux, Emmanuel; Leger, Marc; Deguergue, Maryse; Vallar, Christian; Pissaloux, Jean-Luc; Bernie-Boissard, Catherine; Thireau, Veronique; Takahashi, Nobuyuki; Spencer, Mary; Zhang, Li; Park, Kyun Sung; Artus, J.C.

    2012-01-01

    This book contains the contributions presented during a one-day seminar. The authors propose a framework for a legal approach to nuclear safety, a discussion of the 2009/71/EURATOM directive which establishes a European framework for nuclear safety in nuclear installations, a comment on nuclear safety and environmental governance, a discussion of the relationship between citizenship and nuclear, some thoughts about the Nuclear Safety Authority, an overview of the situation regarding the safety in nuclear waste burying, a comment on the Nome law with respect to electricity price and nuclear safety, a comment on the legal consequences of the Fukushima accident on nuclear safety in the Japanese law, a presentation of the USA nuclear regulation, an overview of nuclear safety in China, and a discussion of nuclear safety in the medical sector

  12. Slaughterhouse by-products treatment using anaerobic digestion.

    Science.gov (United States)

    Moukazis, Ioannis; Pellera, Frantseska-Maria; Gidarakos, Evangelos

    2018-01-01

    The objective of the present study is to evaluate the use of animal by-products (ABP) as substrates for anaerobic digestion, aiming at methane production. Specifically, four ABP of Category 2 and 3, namely (i) stomach and rumen, (ii) stomach contents, (iii) breasts and reproductive organs and (iv) bladders and intestines with their contents, were selected. The methane potential of each ABP was initially determined, while the feasibility of anaerobic co-digestion of ABP with two agroindustrial waste, i.e. orange peels and olive leaves was also studied. To this purpose, Biochemical Methane Potential (BMP), as well as semi-continuous assays were respectively conducted. In the latter, the effect of the variation in the organic loading rate (OLR) on methane production was investigated. Results obtained from BMP assays showed that the samples containing breasts and reproductive organs, bladders and intestine, and stomach and rumen, had higher methane potentials of 815, 787 and 759 mLCH 4,STP /gVS, respectively. Moreover, according to the results of the semi-continuous assays, maximum methane yields between 253 and 727mLCH 4 /gVS fed were obtained at an OLR of 0.8gVS/L/d. The only case in which methanogenesis inhibition phenomena, due to increased ammonia concentrations, were observed, was the assay being fed with a mixture of breasts and reproductive organs and orange peels, at the highest OLR. This inhibition phenomenon was attributed to an inappropriate C/N ratio. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Disinfection byproduct regulatory compliance surrogates and bromide-associated risk.

    Science.gov (United States)

    Kolb, Chelsea; Francis, Royce A; VanBriesen, Jeanne M

    2017-08-01

    Natural and anthropogenic factors can alter bromide concentrations in drinking water sources. Increasing source water bromide concentrations increases the formation and alters the speciation of disinfection byproducts (DBPs) formed during drinking water treatment. Brominated DBPs are more toxic than their chlorinated analogs, and thus have a greater impact on human health. However, DBPs are regulated based on the mass sum of DBPs within a given class (e.g., trihalomethanes and haloacetic acids), not based on species-specific risk or extent of bromine incorporation. The regulated surrogate measures are intended to protect against not only the species they directly represent, but also against unregulated DBPs that are not routinely measured. Surrogates that do not incorporate effects of increasing bromide may not adequately capture human health risk associated with drinking water when source water bromide is elevated. The present study analyzes trihalomethanes (THMs), measured as TTHM, with varying source water bromide concentrations, and assesses its correlation with brominated THM, TTHM risk and species-specific THM concentrations and associated risk. Alternative potential surrogates are evaluated to assess their ability to capture THM risk under different source water bromide concentration conditions. The results of the present study indicate that TTHM does not adequately capture risk of the regulated species when source water bromide concentrations are elevated, and thus would also likely be an inadequate surrogate for many unregulated brominated species. Alternative surrogate measures, including THM 3 and the bromodichloromethane concentration, are more robust surrogates for species-specific THM risk at varying source water bromide concentrations. Copyright © 2017. Published by Elsevier B.V.

  14. Characterization of Rare Earth Element Minerals in Coal Utilization Byproducts

    Energy Technology Data Exchange (ETDEWEB)

    Montross, Scott N. [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); Verba, Circe A. [National Energy Technology Lab. (NETL), Albany, OR (United States). Research Innovation Center; Collins, Keith [National Energy Technology Lab. (NETL), Albany, OR (United States). Research Innovation Center

    2017-07-17

    The United States currently produces over 100 million tons of coal utilization byproducts (CUB) per year in the form of fly ash, bottom ash, slag, and flue gas (American Coal Ash Association (ACCA), 2015). But this “waste material” also contains potentially useful levels of rare earth elements (REE). Rare earth elements are crucial for many existing and emerging technologies, but the U.S. lacks a domestic, sustainable REE source. Our project explored the possibility of developing a supply of REEs for U.S. technologies by extracting REEs from CUBs. This work offers the potential to reduce our dependence on other countries for supply of these critical elements (NETL, REE 2016 Project Portfolio). Geologic and diagenetic history, industrial preparation methods, and the specific combustion process all play major roles in the composition of CUB. During combustion, inorganic mineral phases of coal particles are fluidized at temperatures higher than 1400oC, so inorganic mineral materials are oxidized, fused, disintegrated, or agglomerated into larger spherical and amorphous (non-crystalline) particles. The original mineralogy of the coal-containing rock and heating/cooling of the material significantly affects the composition and morphology of the particles in the combustion byproduct (Kutchko and Kim, 2006). Thus, different types of coal/refuse/ash must be characterized to better understand mineral evolution during the combustion process. Our research focused on developing a working model to address how REE minerals behave during the combustion process: this research should help determine the most effective engineering methods for extracting REEs from CUBs. We used multimodal imaging and image processing techniques to characterize six rock and ash samples from different coal power plants with respect to morphology, grain size, presence of mineral phases, and elemental composition. The results of these characterization activities provided thresholds for realizing the

  15. [Evaluating work intensity in major and auxiliary occupations of by-product coke industry].

    Science.gov (United States)

    Smagulov, N K; Alpysbayeva, Zh T

    2015-01-01

    The article covers evaluation of work strain in major and auxiliary occupations of by-product coke industry. The study results conclude that occupational activity of by-product coke industry workers, under exposure to occupational hazards, affects the workers' performance. Major occupations workers demonstrate higher level of functional strain of CNS, poor concentration of attention and lower ability to switch over, decreased general performance, vs. the auxiliary occupations workers who demonstrated increased cardiovascular and neuro-muscular strain due to occupational activity.

  16. By-Product Formation in Repetitive PCR Amplification of DNA Libraries during SELEX

    DEFF Research Database (Denmark)

    Tolle, Fabian; Wilke, Julian; Wengel, Jesper

    2014-01-01

    The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target-recogniz......The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target......-recognizing aptamers. Little is known about the formation of such by-products when employing nucleic acid libraries as templates. We report on the formation of two different forms of by-products, named ladder- and non-ladder-type observed during repetitive amplification in the course of in vitro selection experiments....... Based on sequence information and the amplification behaviour of defined enriched nucleic acid molecules we suppose a molecular mechanism through which these amplification by-products are built. Better understanding of these mechanisms might help to find solutions minimizing by-product formation...

  17. Silage or fresh by-product of peach palm as roughage in the feeding of lambs.

    Science.gov (United States)

    dos Santos Cabral, Ícaro; Azevêdo, José Augusto Gomes; de Almeida, Flávio Moreira; Pereira, Luiz Gustavo Ribeiro; de Araújo, Gherman Garcia Leal; Nogueira, Abdon Santos; Souza, Lígia Lins; de Oliveira, Gisele Andrade; de Oliveira Filho, Carlos Alberto Alves

    2015-03-01

    The objective of this study was to evaluate intake and apparent digestibility of agro-industrial by-product of peach palm in diets for lambs. Twenty castrated, crossbred Santa Ines lambs, with average age of 150 days and body weight of 22.4 ± 3.4 kg, were distributed in a completely randomized design with four experimental diets composed of the following: fresh by-product of peach palm enriched with urea + ammonia sulfate (FU); fresh peach palm by-product + concentrate (FP); silage of peach palm by-product + concentrate (SP); and silage of peach palm by-product enriched with 15% of cornmeal + concentrate (SPC). Intake was recorded daily, and the digestibility coefficients were estimated with the internal marker indigestible acid detergent fiber (iADF). Diet FU resulted in the lowest intake and digestibility of the nutrients evaluated. Animals receiving diet FP showed higher intakes of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF), total digestible nutrients (TDN), and digestible energy (DE) in relation to animals fed diets SP and SPC. Diets SP and SPC showed higher coefficients of digestibility of DM, OM, CP, and NDF than diet FP. Diet SP reduced the intakes of DM, OM, ether extract (EE), non-fibrous carbohydrate (NFC), TDN, and DE and the digestibility coefficients of DM, OM, and NFC as compared with diet SPC. Feedlot lambs fed a diet with fresh peach palm by-product + concentrate (diet FP) have higher nutrient intake.

  18. Aqueous chlorination of mefenamic acid: kinetics, transformation by-products and ecotoxicity assessment.

    Science.gov (United States)

    Adira Wan Khalit, Wan Nor; Tay, Kheng Soo

    2016-05-18

    Mefenamic acid (Mfe) is one of the most frequently detected nonsteroidal anti-inflammatory drugs in the environment. This study investigated the kinetics and the transformation by-products of Mfe during aqueous chlorination. The potential ecotoxicity of the transformation by-products was also evaluated. In the kinetic study, the second-order rate constant (kapp) for the reaction between Mfe and free available chlorine (FAC) was determined at 25 ± 0.1 °C. The result indicated that the degradation of Mfe by FAC is highly pH-dependent. When the pH was increased from 6 to 8, it was found that the kapp for the reaction between Mfe and FAC was decreased from 16.44 to 4.4 M(-1) s(-1). Characterization of the transformation by-products formed during the chlorination of Mfe was carried out using liquid chromatography-quadrupole time-of-flight accurate mass spectrometry. Four major transformation by-products were identified. These transformation by-products were mainly formed through hydroxylation, chlorination and oxidation reactions. Ecotoxicity assessment revealed that transformation by-products, particularly monohydroxylated Mfe which is more toxic than Mfe, can be formed during aqueous chlorination.

  19. Fifty years with nuclear fission

    International Nuclear Information System (INIS)

    Behrens, J.W.; Carlson, A.D.

    1989-01-01

    The news of the discovery of nucler fission, by Otto Hahn and Fritz Strassmann in Germany, was brought to the United States by Niels Bohr in January 1939. Since its discovery, the United States, and the world for that matter, has never been the same. It therefore seemed appropriate to acknowledge the fiftieth anniversary of its discovery by holding a topical meeting entitled, ''Fifty years with nuclear fission,'' in the United States during the year 1989. The objective of the meeting was to bring together pioneers of the nuclear industry and other scientists and engineers to report on reminiscences of the past and on the more recent developments in fission science and technology. The conference highlighted the early pioneers of the nuclear industry by dedicating a full day (April 26), consisting of two plenary sessions, at the National Academy of Sciences (NAS) in Washington, DC. More recent developments in fission science and technology in addition to historical reflections were topics for two full days of sessions (April 27 and 28) at the main sites of the NIST in Gaithersburg, Maryland. The wide range of topics covered by Volume 2 of this topical meeting included plenary invited, and contributed sessions entitled, Nuclear fission -- a prospective; reactors II; fission science II; medical and industrial applications by by-products; reactors and safeguards; general research, instrumentation, and by-products; and fission data, astrophysics, and space applications. The individual papers have been cataloged separately

  20. Financing Nonappropriated Fund (NAF) Major Construction.

    Science.gov (United States)

    1985-03-09

    7-3 7.4 Market Analysis -Delta ...................... 7- 7.4.1 Franchisors ............................. 7-8 7.4.2 Owner-Operators...oojectives. Face-to-face conversations and telephone interviews were used to collect results. Companies were categorized in seven types: franchisors , owner...Attracting quality developers, franchisors , and concessionaires will depend in part on how well the Army can show its ability to uphold and enhance the

  1. Innovative nuclear energy systems roadmap

    International Nuclear Information System (INIS)

    2007-12-01

    Developing nuclear energy that is sustainable, safe, has little waste by-product, and cannot be proliferated is an extremely vital and pressing issue. To resolve the four issues through free thinking and overall vision, research activities of 'innovative nuclear energy systems' and 'innovative separation and transmutation' started as a unique 21st Century COE Program for nuclear energy called the Innovative Nuclear Energy Systems for Sustainable Development of the World, COE-INES. 'Innovative nuclear energy systems' include research on CANDLE burn-up reactors, lead-cooled fast reactors and using nuclear energy in heat energy. 'Innovative separation and transmutation' include research on using chemical microchips to efficiently separate TRU waste to MA, burning or destroying waste products, or transmuting plutonium and other nuclear materials. Research on 'nuclear technology and society' and 'education' was also added in order for nuclear energy to be accepted into society. COE-INES was a five-year program ending in 2007. But some activities should be continued and this roadmap detailed them as a rough guide focusing inventions and discoveries. This technology roadmap was created for social acceptance and should be flexible to respond to changing times and conditions. (T. Tanaka)

  2. Integrated Disinfection By-Products Mixtures Research: Concentration by Reverse Osmosis Membrane Techniques of Disinfection By-Products from Water Disinfected by Chlorination and Ozonation/Postchlorination

    Science.gov (United States)

    To conduct the health-effect studies described in subsequent articles in this series, concentrated aqueous mixtures of disinfection by-products were required for the two water treatment trains described in the preceding article (Miltner et al., 2008). To accomplish this, the fini...

  3. An investigation of sodium–CO{sub 2} interaction byproduct cleaning agent for SFR coupled with S-CO{sub 2} Brayton cycle

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hwa-Young, E-mail: jhy0523@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Division of SFR NSSS System Design, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989beon-gil, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Lee, Jeong Ik, E-mail: jeongiklee@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Wi, Myung-Hwan, E-mail: mhwi@kaeri.re.kr [Division of SFR NSSS System Design, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989beon-gil, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Ahn, Hong Joo, E-mail: ahjoo@kaeri.re.kr [Division of Nuclear Chemistry Research, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989beon-gil, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)

    2016-02-15

    Highlights: • Study on cleaning agent was conducted to remove Na–CO{sub 2} interaction byproducts. • Screening criteria to select candidate substances as cleaning agents were suggested. • The mixtures of Na{sub 2}CO{sub 3} with NaBrO{sub 3}, NaClO{sub 3}, or NaBF{sub 4} were thermally analyzed with the TG/DTA studies. • Three candidate substances decomposed before 600 °C and did not react with Na{sub 2}CO{sub 3}. - Abstract: One of the promising future nuclear energy systems, the Sodium-cooled Fast Reactor (SFR) has been actively developed internationally. Recently, to improve safety and economics of a SFR further, coupling supercritical CO{sub 2} power cycle was suggested. However, there can be a chemical reaction between sodium and CO{sub 2} at high temperature (more than 400 °C) when the pressure boundary fails in a sodium–CO{sub 2} heat exchanger. To ensure the performance of such a system, it is important to employ a cleaning agent to recover the system back to normal condition after the reaction. When sodium and CO{sub 2} react, solid and gaseous reaction products such as sodium carbonate (Na{sub 2}CO{sub 3}) and carbon monoxide (CO) appear. Since most of solid reaction products are hard and can deteriorate system performance, quick removal of solid reaction products becomes very important for economic performance of the system. Thus, the authors propose the conceptual method to remove the byproducts with a chemical reaction at high temperature. The chemical reaction will take place between the reaction byproducts and a cleaning agent while the cleaning agent is inert with sodium. Thus, various sodium-based compounds were first investigated and three candidate substances satisfying several criteria were selected; sodium bromate (NaBrO{sub 3}), sodium chlorate (NaClO{sub 3}), and sodium tetrafluoroborate (NaBF{sub 4}). The selected substances were thermally analyzed with the TG/DTA studies. Unfortunately, it was revealed that all candidate

  4. Land application uses for dry FGD by-products. Phase 2 report

    Energy Technology Data Exchange (ETDEWEB)

    Stehouwer, R.; Dick, W.; Bigham, J. [Ohio State Univ., Columbus, OH (United States)] [and others

    1996-03-01

    A study was initiated in December 1990 to demonstrate large volume beneficial uses of flue gas desulfurization (FGD) by-products. A Phase 1 report provided results of an extensive characterization of chemical, physical, mineralogical and engineering properties of 58 dry FGD by-product samples. The Phase 1 report concluded that high volume beneficial reuses will depend on the economics related to their ability to substitute for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mine lands). Phase 2 objectives were (1) to conduct laboratory and greenhouse studies of FGD and soil (spoil) mixtures for agronomic and engineering applications, (2) to initiate field studies related to high volume agronomic and engineering uses, and (3) to develop the basic methodological framework for estimation of the financial and economic costs and benefits to society of several FGD reuse options and to make some preliminary runs of economic models. High volume beneficial reuses of dry FGD by-products have been successfully demonstrated. Adverse environmental impacts have been negligible. Although few sources of dry FGD by-products currently exist in Ohio and the United States there is potential for smaller coal-fired facilities to adopt S0{sub 2} scrubbing technologies that produce dry FGD material. Also much of what we have learned from studies on dry FGD by-products is applicable to the more prevalent wet FGD by-products. The adaptation of the technologies demonstrated in this project seem to be not only limited by economic constraints, but even more so, by the need to create awareness of the market potential of using these FGD by-products.

  5. Land application uses for dry flue gas desulfurization by-products. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Dick, W.; Bigham, J.; Forster, R.; Hitzhusen, F.; Lal, R.; Stehouwer, R.; Traina, S.; Wolfe, W.; Haefner, R.; Rowe, G.

    1999-01-31

    Flue gas desulfurization (FGD) scrubbing technologies create several types of by-products. This project focused primarily on by-product materials obtained from what are commonly called ''dry scrubbers'' which produce a dry, solid material consisting of excess sorbent, reaction product that contains sulfate and sulfite, and coal fly ash. Prior to this project, dry FGD by-products were generally treated as solid wastes and disposed in landfills. However, landfill sites are becoming scarce and tipping fees are constantly increasing; The major objective of this project was to develop beneficial uses, via recycling, capable of providing economic benefits to both the producer and the end user of the FGD by-product. It is equally important, however, that the environmental impacts be carefully assessed so that the new uses developed are not only technically feasible but socially acceptable. Specific objectives developed for this project were derived over an 18-month period during extensive discussions with personnel from industry, regulatory agencies and research institutions. These were stated as follows: Objective 1: To characterize the material generated by dry FGD processes. Objective 2: To demonstrate the utilization of dry FGD by-product as a soil amendment on agricultural lands and on abandoned and active surface coal mines in Ohio. Objective 3: To demonstrate the use of dry FGD by-product as an engineering material for soil stabilization. Objective 4: To determine the quantities of dry FGD by-product that can be utilized in each of these applications. Objective 5. To determine the environmental and economic impacts of utilizing the material. Objective 6. To calibrate environmental, engineering, and economic models that can be used to determine the applicability and costs of utilizing these processes at other sites.

  6. Land application uses for dry FGD by-products, Phase 1 report

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W.

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. FGD by-product materials are treated as solid wastes and must be landfilled. It is highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. The results indicated the chemical composition of the FGD by-product materials were dominated by Ca, S, Al, and Si. Many of the elements regulated by the US Environmental Protection Agency reside primarily in the fly ash. Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD by-product materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  7. Thermal analysis and phase diagrams of the LiF BiF{sub 3} e NaF BiF{sub 3} systems; Analise termica e diagramas de fase dos sistemas LiF-BiF{sub 3} e NaF-BiF{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Gerson Hiroshi de Godoy

    2013-07-01

    Investigations of the binary systems LiF-BiF{sub 3} and NaF-BiF{sub 3} were performed with the objective of clarifying the thermal behavior and phase equilibria of these systems and their intermediary phases, an important requisite for high-quality crystal growth. Several samples in the entire range of compositions (0 to 100 mol% BiF{sub 3}) of both systems were subjected to experiments of differential thermal analysis (DTA) and thermogravimetry (TG), and also of differential scanning calorimetry (DSC). A few specific compositions were selected for X-ray diffraction to supplement the experimental data. Due to the high vulnerability of BiF{sub 3} to oxygen contamination, its volatility and propensity to destroy metal parts upon heating, it was necessary to determine the optimal conditions for thermal analysis before investigating the systems themselves. Phase relations in the system LiF-BiF{sub 3} were completely clarified and a phase diagram was calculated and evaluated via the commercial software Factsage. The diagram itself consists in a simple peritectic system in which the only intermediary compound, LiBiF{sub 4}, decomposes into LiF and a liquid phase. The NaF-BiF{sub 3} system could not be completely elucidated and the phase relations in the NaF poor side (> 50% BiF{sub 3}) are still unknown. In the NaF rich side, however, the possible peritectoid decomposition of the compound NaBiF{sub 4} was identified. In both systems X-ray diffraction yielded crystal structures discrepant with the literature for the intermediary phases, LiBiF{sub 4}, NaBiF{sub 4} and a solid solution of NaF and BiF{sub 3} called {sup I.} The observed structures remain unknown and explanations for the discrepancies were proposed. (author)

  8. Nuclear energy and radiation

    International Nuclear Information System (INIS)

    Myers, D.K.; Johnson, J.R.

    1980-01-01

    Both the light water reactor and the Canadian heavy water reactor systems produce electricity cheaply and efficiently. They produce some fissionable byproducts, which can be recycled to extend energy sources many-fold. Besides the production of electrical power, the nuclear industry produces various radioistopes used for treatment of cancer, in diagnostic procedures in nuclear medicine, in ionization smoke detectors, and as radioactive tracers with various technological applications including the study of the mechanisms of life. The increment in environmental radiation levels resulting from operation of nuclear power reactors represents a very small fraction of the radiation levels to which we are all exposed from natural sources, and of the average radiation exposures resulting from diagnostic procedures in the healing arts. The total health hazard of the complete nuclear power cycle is generally agreed to be smaller than the hazards associated with the generation of an equal amount of electricity from most other currently available sources of energy. The hazards from energy production in terms of shortened life expectancy are much smaller in all cases than the resulting increase in health and life expectancy. (auth)

  9. Problems and prospects for nuclear waste disposal policy

    International Nuclear Information System (INIS)

    Herzik, E.B.; Mushkatel, A.H.

    1996-01-01

    This book is a collection of articles examining legal, organizational, and public-interest issues involving the transportation, storage, treatment, and disposal of radioactive wastes. The introductions examines the unresolved issues of nuclear-waste policy-making in the USA and then presents essays covering the disposal of commercial power plant fuel, low level radioactive wastes, the by-products of nuclear weapons production, and the challenges of transporting radiological materials

  10. Utilization of Food Processing By-products as Dietary, Functional, and Novel Fiber: A Review.

    Science.gov (United States)

    Sharma, Satish Kumar; Bansal, Sangita; Mangal, Manisha; Dixit, Anil Kumar; Gupta, Ram K; Mangal, A K

    2016-07-26

    Fast growing food processing industry in most countries across the world, generates huge quantity of by-products, including pomace, hull, husk, pods, peel, shells, seeds, stems, stalks, bran, washings, pulp refuse, press cakes, etc., which have less use and create considerable environmental pollution. With growing interest in health promoting functional foods, the demand of natural bioactives has increased and exploration for new sources is on the way. Many of the food processing industrial by-products are rich sources of dietary, functional, and novel fibers. These by-products can be directly (or after certain modifications for isolation or purification of fiber) used for the manufacture of various foods, i.e. bread, buns, cake, pasta, noodles, biscuit, ice creams, yogurts, cheese, beverages, milk shakes, instant breakfasts, ice tea, juices, sports drinks, wine, powdered drink, fermented milk products, meat products and meat analogues, synthetic meat, etc. A comprehensive literature survey has been carried on this topic to give an overview in the field dietary fiber from food by-products. In this article, the developments in the definition of fiber, fiber classification, potential sources of dietary fibers in food processing by-products, their uses, functional properties, caloric content, energy values and the labelling regulations have been discussed.

  11. Anaerobic treatment of animal byproducts from slaughterhouses at laboratory and pilot scale.

    Science.gov (United States)

    Edström, Mats; Nordberg, Ake; Thyselius, Lennart

    2003-01-01

    Different mixtures of animal byproducts, other slaughterhouse waste (i.e., rumen, stomach and intestinal content), food waste, and liquid manure were codigested at mesophilic conditions (37 degrees C) at laboratory and pilot scale. Animal byproducts, including blood, represent 70-80% of the total biogas potential from waste generated during slaughter of animals. The total biogas potential from waste generated during slaughter is about 1300 MJ/cattle and about 140 MJ/pig. Fed-batch digestion of pasteurized (70 degrees C, 1 h) animal byproducts resulted in a fourfold increase in biogas yield (1.14 L/g of volatile solids [VS]) compared with nonpasteurized animal byproducts (0.31 L/g of VS). Mixtures with animal byproducts representing 19-38% of the total dry matter were digested in continuous-flow stirred tank reactors at laboratory and pilot scale. Stable processes at organic loading rates (OLRs) exceeding 2.5 g of VS/(L.d) and hydraulic retention times (HRTs) less than 40 d could be obtained with total ammonia nitrogen concentrations (NH4-N + NH3-N) in the range of 4.0-5.0 g/L. After operating one process for more than 1.5 yr at total ammonia nitrogen concentrations >4 g/L, an increase in OLR to 5 g of VS/(L.d) and a decrease in HRT to 22 d was possible without accumulation of volatile fatty acids.

  12. Design manual for management of solid by-products from advanced coal technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-01

    Developing coal conversion technologies face major obstacles in byproduct management. This project has developed several management strategies based on field trials of small-scale landfills in an earlier phase of the project, as well as on published/unpublished sources detailing regulatory issues, current industry practice, and reuse opportunities. Field testing, which forms the basis for several of the disposal alternatives presented in this design manual, was limited to byproducts from Ca-based dry SO{sub 2} control technologies, circulating fluidized bed combustion ash, and bubbling bed fluidized bed combustion ash. Data on byproducts from other advanced coal technologies and on reuse opportunities are drawn from other sources (citations following Chapter 3). Field results from the 5 test cases examined under this project, together with results from other ongoing research, provide a basis for predictive modeling of long-term performance of some advanced coal byproducts on exposure to ambient environment. This manual is intended to provide a reference database and development plan for designing, permitting, and operating facilities where advanced coal technology byproducts are managed.

  13. Structure and fertilizer properties of byproducts formed in the synthesis of EDDHA.

    Science.gov (United States)

    Hernández-Apaolaza, Lourdes; García-Marco, Sonia; Nadal, Paloma; Lucena, Juan J; Sierra, Miguel A; Gómez-Gallego, Mar; Ramírez-López, Pedro; Escudero, Rosa

    2006-06-14

    The synthesis of commercial EDDHA produces o,o-EDDHA as the main reaction product, together with a mixture of regioisomers (o,p-EDDHA and p,p-EDDHA) and other unknown byproducts also able to complex Fe3+. These compounds have been obtained by direct synthesis, and their structures have been determined by ESI-MS analysis as oligomeric EDDHA-like products, formed by polysubstitution in the phenolic rings. Short-term experiments show that the iron complexes of samples enriched in these oligomeric byproducts have adequate stability in solution, but a significant amount of them is lost after interaction with soils and soil materials. Mildly chlorotic cucumber plants are able to reduce iron better from o,p-EDDHA/Fe3+ than from the iron complexes of the oligomeric byproducts. In hydroponics, the chlorotic soybean susceptible plants have a lower potential for Fe absorption from these byproducts than from o,o-EDDHA/Fe3+ and from o,p-EDDHA/Fe3+. In the studied conditions, the iron chelates of EDDHA byproducts do not have the long-lasting effect shown by o,o-EDDHA/Fe3+ and present a less efficient fast-action effect than the o,p-EDDHA/Fe3+.

  14. Mineral composition of fruit by-products evaluated by neutron activation analysis

    International Nuclear Information System (INIS)

    Gabriela de Matuoka e Chiocchetti; Nadai Fernandes de, E.A.; Macio Arruda Bacchi; Rogerio Augusto Pazim; Silvana Regina Vicino Sarries; Thais Melega Tome

    2013-01-01

    Brazil is one of the largest producers of fruits cropping 40 million tons per year. In agro-food processing, approximately 50 % of raw material is discarded generating large amounts of by-products. The lack of information on the nutritional quality of agroindustrial by-products precludes their potential use in the manufacture of food products accessible to all. In this context, the objective of this work was to investigate the nutritional quality of by-products of the industrial processing of fruits. Samples of bagasse, peel and seeds of several fruits (banana, camu camu, coconut, cupuacu, guava, jackfruit, mango, orange, papaya, pineapple, and soursop) were analysed by neutron activation analysis for the determination of Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sc and Zn. In general, higher levels of minerals were found in the by-products rather than in the pulps of fruits. This indicates that the use of the by-products should be encouraged, thereby reducing the economic and environmental impact of waste generated by agroindustrial processing. (author)

  15. Land application uses for dry flue gas desulfurization by-products: Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Dick, W.; Bigham, J.; Forster, R.; Hitzhusen, F.; Lal, R.; Stehouwer, R.; Traina, S.; Wolfe, W.; Haefner, R.; Rowe, G.

    1999-01-31

    New flue gas desulfurization (FGD) scrubbing technologies create a dry, solid by-product material consisting of excess sorbent, reaction product that contains sulfate and sulfite, and coal fly ash. Generally, dry FGD by-products are treated as solid wastes and disposed in landfills. However, landfill sites are becoming scarce and tipping fees are constantly increasing. Provided the environmental impacts are socially and scientifically acceptable, beneficial uses via recycling can provide economic benefits to both the producer and the end user of the FGD. A study titled ''Land Application Uses for Dry Flue Gas Desulfurization By-Products'' was initiated in December, 1990 to develop and demonstrate large volume, beneficial uses of FGD by-products. Phase 1 and Phase 2 reports have been published by the Electric Power Research Institute (EPRI), Palo Alto, CA. Phase 3 objectives were to demonstrate, using field studies, the beneficial uses of FGD by-products (1) as an amendment material on agricultural lands and on abandoned surface coal mine land, (2) as an engineering material for soil stabilization and raid repair, and (3) to assess the environmental and economic impacts of such beneficial uses. Application of dry FGD by-product to three soils in place of agricultural limestone increased alfalfa (Medicago sativa L.) and corn (Zea may L.) yields. No detrimental effects on soil and plant quality were observed.

  16. Vegetable, livestock and agroindustrial products and byproducts: An alternative tilapia feeding

    Directory of Open Access Journals (Sweden)

    González Salas, R.

    2014-01-01

    Full Text Available In the culture of tilapia limited supply and high cost of fish meal have forced nutritionists to consider alternative sources of protein. Due to the importance of the products and by-products in fish feed, this paper aims to show the alternatives that have been used to partially or totally replace fish meal and soybean meal in tilapia growing. This paper showsthe maximum or optimal use of vegetable by-products for tilapia as cottonseed meal, sunflower, canola, soybean and Leucaena. It also deals with the inclusion with agro-industrial by-product such as corn, sorghum, coffee pulp, cocoa, wheat and citrus. The present study also deals with the use of aquatic plants such as Lemna and Azolla, single-celled plant protein source as antibiotics and probiotics. Finally, this paper also refers to animal by-products as silage, manure and earthworm usage. There is a high potential for using plant, livestock and agro-industrial by-products in fresh and processed food for the tilapia, but depending on the product, pretreatment to improve its balance of nutrients or eliminate anti-nutritional factors may be required.

  17. STARCH/PULP-FIBER BASED PACKAGING FOAMS AND CAST FILMS CONTAINING ALASKAN FISH BY-PRODUCTS (WASTE)

    OpenAIRE

    Syed H. Imam; Bor-Sen Chiou; Delilah Woods; Justin Shey; Gregory M. Glenn; William J. Orts; Rajnesh Narayan; Robert J. Avena-Bustillos; Tara H. McHugh; Alberto Pantoja; Peter J. Bechtel

    2008-01-01

    Baked starch/pulp foams were prepared from formulations containing zero to 25 weight percent of processed Alaskan fish by-products that consisted mostly of salmon heads, pollock heads, and pollock frames (bones and associated remains produced in the filleting operation). Fish by-products thermoformed well along with starch and pulp fiber, and the foam product (panels) exhibited useful mechanical properties. Foams with all three fish by-products, ranging between 10 and 15 wt%, showed the highe...

  18. Recovery potential of cold press byproducts obtained from the edible oil industry: physicochemical, bioactive, and antimicrobial properties.

    Science.gov (United States)

    Karaman, Safa; Karasu, Salih; Tornuk, Fatih; Toker, Omer Said; Geçgel, Ümit; Sagdic, Osman; Ozcan, Nihat; Gül, Osman

    2015-03-04

    Physicochemical, bioactive, and antimicrobial properties of different cold press edible oil byproducts (almond (AOB), walnut (WOB), pomegranate (POB), and grape (GOB)) were investigated. Oil, protein, and crude fiber content of the byproducts were found between 4.82 and 12.57%, between 9.38 and 49.05%, and between 5.87 and 45.83%, respectively. GOB had very high crude fiber content; therefore, it may have potential for use as a new dietary fiber source in the food industry. As GOB, POB, and WOB oils were rich in polyunsaturated fatty acids, AOB was rich in monounsaturated fatty acids. Oil byproducts were also found to be rich in dietary mineral contents, especially potassium, calcium, phosphorus, and magnesium. WOB had highest total phenolic (802 ppm), flavonoid (216 ppm), and total hydrolyzed tannin (2185 ppm) contents among the other byproducts. Volatile compounds of all the byproducts are mainly composed of terpenes in concentration of approximately 95%. Limonene was the dominant volatile compound in all of the byproducts. Almond and pomegranate byproduct extracts showed antibacterial activity depending on their concentration, whereas those of walnut and grape byproducts showed no antibacterial activity against any pathogenic bacteria tested. According to the results of the present study, walnut, almond, pomegranate, and grape seed oil byproducts possess valuable properties that can be taken into consideration for improvement of nutritional and functional properties of many food products.

  19. Nuclear Medicine

    Science.gov (United States)

    ... Parents/Teachers Resource Links for Students Glossary Nuclear Medicine What is nuclear medicine? What are radioactive tracers? ... funded researchers advancing nuclear medicine? What is nuclear medicine? Nuclear medicine is a medical specialty that uses ...

  20. IGCC and PFBC By-Products: Generation, Characteristics, and Management Practices

    Energy Technology Data Exchange (ETDEWEB)

    Pflughoeft-Hassett, D.F.

    1997-09-01

    The following report is a compilation of data on by-products/wastes from clean coal technologies, specifically integrated gasification combined cycle (IGCC) and pressurized fluidized-bed combustion (PFBC). DOE had two objectives in providing this information to EPA: (1) to familiarize EPA with the DOE CCT program, CCT by-products, and the associated efforts by DOE contractors in the area of CCT by-product management and (2) to provide information that will facilitate EPA's effort by complementing similar reports from industry groups, including CIBO (Council of Industrial Boiler Owners) and EEI USWAG (Edison Electric Institute Utility Solid Waste Activities Group). The EERC cooperated and coordinated with DOE CCT contractors and industry groups to provide the most accurate and complete data on IGCC and PFBC by-products, although these technologies are only now being demonstrated on the commercial scale through the DOE CCT program.

  1. Effects of an onion by-product on bioactivity and safety markers in healthy rats

    DEFF Research Database (Denmark)

    Roldan-Marin, Eduvigis; Krath, Britta; Poulsen, Morten

    2009-01-01

    Onions are excellent sources of bioactive compounds including fructo-oligosaccharides (FOS) and polyphenols. An onion by-product was characterised in order to be developed as a potentially bioactive food ingredient. Our main aim was to investigate whether the potential health and safety effects...... of this onion by-product were shared by either of two derived fractions, an extract containing the onion FOS and polyphenols and a residue fraction containing mainly cell wall materials. We report here on the effects of feeding these products on markers of potential toxicity, protective enzymes and gut...... environment in healthy rats. Rats were fed during 4 weeks with a diet containing the products or a control feed balanced in carbohydrate. The onion by-product and the extract caused anaemia as expected in rodents for Allium products. No other toxicity was observed, including genotoxicity. Glutathione...

  2. By-products of Opuntia ficus-indica as a source of antioxidant dietary fiber.

    Science.gov (United States)

    Bensadón, Sara; Hervert-Hernández, Deisy; Sáyago-Ayerdi, Sonia G; Goñi, Isabel

    2010-09-01

    Dietary fiber and bioactive compounds are widely used as functional ingredients in processed foods. The market in this field is competitive and the development of new types of quality ingredients for the food industry is on the rise. Opuntia ficus-indica (cactus pear) produces edible tender stems (cladodes) and fruits with a high nutritional value in terms of minerals, protein, dietary fiber and phytochemicals; however, around 20% of fresh weight of cladodes and 45% of fresh weight of fruits are by-products. The objective of this study was therefore to determine the nutritional value of by-products obtained from cladodes and fruits from two varieties of Opuntia ficus-indica, examining their dietary fiber and natural antioxidant compound contents in order to obtain quality ingredients for functional foods and increase the added value of these by-products.

  3. By-products of fruits processing as a source of phytochemicals

    Directory of Open Access Journals (Sweden)

    Sonja Djilas

    Full Text Available The processing of fruits results in high amounts of waste materials such as peels, seeds, stones, and oilseed meals. A disposal of these materials usually represents a problem that is further aggravated by legal restrictions. Thus new aspects concerning the use of these wastes as by-products for further exploitation on the production of food additives or supplements with high nutritional value have gained increasing interest because these are high-value products and their recovery may be economically attractive. It is well known that by-products represent an important source of sugars, minerals, organic acid, dietary fibre and phenolics which have a wide range of action which includes antitumoral, antiviral, antibacterial, cardioprotective and antimutagenic activities. This review discusses the potential of the most important by-products of apple, grape and citrus fruits processing as a source of valuable compounds. The relevance of this topic is illustrated by a number of references.

  4. Water extracts from winery by-products as tobacco defense inducers.

    Science.gov (United States)

    Benouaret, Razik; Goujon, Eric; Trivella, Aurélien; Richard, Claire; Ledoigt, Gérard; Joubert, Jean-Marie; Mery-Bernardon, Aude; Goupil, Pascale

    2014-10-01

    Water extracts from winery by-products exhibited significant plant defense inducer properties. Experiments were conducted on three marc extracts containing various amounts of polyphenols and anthocyanins. Infiltration of red, white and seed grape marc extracts into tobacco leaves induced hypersensitive reaction-like lesions with cell death evidenced by Evans Blue staining. The infiltration zones and the surrounding areas revealed accumulation of autofluorescent compounds under UV light. Leaf infiltration of the three winery by-product extracts induced defense gene expression. The antimicrobial PR1, β-1,3-glucanase PR2, and chitinase PR3 target genes were upregulated locally in tobacco plants following grape marc extract treatments. The osmotin PR5 transcripts accumulated as well in red marc extract treated-tobacco leaves. Overall, the winery by-product extracts elicited an array of plant defense responses making the grape residues a potential use of high value compounds.

  5. Nuclear safety. Seguranca nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Aveline, A [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Inst. de Fisica

    1981-01-01

    What is nuclear safety Is there any technical way to reduce risks Is it possible to put them at reasonable levels Are there competitiveness and economic reliability to employ the nuclear energy by means of safety technics Looking for answers to these questions the author describes the sources of potential risks to nuclear reactors and tries to apply the answers to the Brazilian Nuclear Programme. (author).

  6. Assessment of by-products of bioenergy systems (anaerobic digestion and gasification) as potential crop nutrient.

    Science.gov (United States)

    Kataki, Sampriti; Hazarika, Samarendra; Baruah, D C

    2017-01-01

    Alternative fertilizer resources have drawn attention in recent times in order to cope up with ever increasing demand for fertilizer. By-products of bioenergy system are considered favourable as organic fertilizer due to their ability to recycle plant nutrients. Present study evaluates fertilizer suitability of by-products of two bioenergy systems viz. 3 types of anaerobic digestion by-products (digestate) from local surplus biomass such as cowdung, Ipomoea carnea:cowdung (60:40) and ricestraw:green gram stover:cowdung (30:30:40) and one gasification by-product (biochar) from rice husk. Digestates were assessed considering 4 different application options of each viz. whole, solid, liquid and ash from solid digestates. Digestate characteristics (organic matter, macronutrients, micronutrients and heavy metal content) were found to be a function of feedstock and processing (solid liquid separation and ashing). Ipomoea carnea based digestates in all application options showed comparatively higher N, P, K, NH 4 + -N, Ca, Mg, S and micro nutrient content than other digestates. Separation concentrated plant nutrients and organic matter in solid digestates, making these suitable both as organic amendments and fertilizer. Separated liquid digestate shared larger fraction of ammonium nitrogen (61-91% of total content), indicating their suitability as readily available N source. However, fertilizer application of liquid digestate may not match crop requirements due to lower total nutrient concentration. Higher electrical conductivity of the liquid digestates (3.4-9.3mScm -1 ) than solid digestates (1.5-2mScm -1 ) may impart phyto-toxic effect upon fertilization due to salinity. In case of by-products with unstable organic fraction i.e. whole and solid digestates of rice straw:green gram stover:cowdung digestates (Humification index 0.7), further processing (stabilization, composting) may be required to maximize their fertilizer benefit. Heavy metal contents of the by-products

  7. Manufacture of phosphatic fertilisers and recovery of byproduct uranium - a review

    International Nuclear Information System (INIS)

    Ring, R.J.

    1975-11-01

    The processes used in the production of phosphatic fertilisers are reviewed and those in which uranium can be extracted as a byproduct are described in detail. The current status of the world and Australian phosphate rock and fertiliser industries is described and production figures and marketing information for these industries are also presented. Techniques for the recovery of byproduct uranium during the processing of phosphate rock to fertilisers are also examined in detail. Recovery from wet-process phosphoric acid by solvent extraction is the most promising approach. (author)

  8. Professional Nuclear Materials Management

    International Nuclear Information System (INIS)

    Forcella, A.A.; O'Leary, W.J.

    1966-01-01

    This paper describes the scope of nuclear materials management for a typical power reactor in the United States of America. Since this power reactor is financed by private capital, one of the principal obligations of the reactor operator is to ensure that the investment is protected and will furnish an adequate financial return. Because of the high intrinsic value of nuclear materials, appropriate security and accountability must be continually exercised to minimize losses beyond security and accountability for the nuclear materials. Intelligent forethought and planning must be employed to ensure that additional capital is not lost as avoidable additional costs or loss of revenue in a number of areas. The nuclear materials manager must therefore provide in advance against the following contingencies and maintain constant control or liaison against deviations from planning during (a) pre-reactor acquisition of fuel and fuel elements, (b) in-reactor utilization of the fuel elements, and (c) post-reactor recovery of fuel values. During pre-reactor planning and operations, it is important that the fuel element be designed for economy in manufacture, handling, shipping, and replaceability. The time schedule for manufacturing operations must minimize losses of revenue from unproductive dead storage of high cost materials. For in-reactor operations, the maximum achievable burn-up of the fissionable material must be obtained by means of appropriate fuel rearrangement schemes. Concurrently the unproductive down-time of the reactor for fuel rearrangement, inspections, and the like must be minimized. In the post-reactor period, when the fuel has reached a predetermined depletion of fissionable material, the nuclear materials manager must provide for the most economical reprocessing and recovery of fissionable values and by-products. Nuclear materials management is consequently an essential factor in achieving competitive fuel cycle and unit energy costs with power reactors

  9. Invisible nuclear; converting nuclear

    International Nuclear Information System (INIS)

    Park, Jongmoon

    1993-03-01

    This book consists of 14 chapters which are CNN era and big science, from East and West to North and South, illusory nuclear strategy, UN and nuclear arms reduction, management of armaments, advent of petroleum period, the track of nuclear power generation, view of energy, internationalization of environment, the war over water in the Middle East, influence of radiation and an isotope technology transfer and transfer armament into civilian industry, the end of nuclear period and the nuclear Nonproliferation, national scientific and technological power and political organ and executive organ.

  10. Introduction;Commemorating the first self-sustaining nuclear chain reaction on 2 December 1942

    Energy Technology Data Exchange (ETDEWEB)

    Eklund, S [International Atomic Energy Agency, Vienna (Austria)

    1962-12-02

    On the occasion of the 20th anniversary of the conducting of the first self-sustaining nuclear chain reaction and following development of nuclear reactors, the article reviews the work and scientific development behind this achievement. The impact of atomic energy on economics, benefits of nuclear reactors for electricity production and the by-product - radio isotopes, used in different areas such as industry, medicine, agriculture etc. are pointed out

  11. 19 CFR 19.15 - Withdrawal for exportation of articles manufactured in bond; waste or byproducts for consumption.

    Science.gov (United States)

    2010-04-01

    ... manufactured in bond; waste or byproducts for consumption. 19.15 Section 19.15 Customs Duties U.S. CUSTOMS AND... exportation of articles manufactured in bond; waste or byproducts for consumption. (a) Except cigars... may be withdrawn from the warehouse for consumption under Customs Form 7501 upon payment of the duties...

  12. 9 CFR 95.30 - Restrictions on entry of products and byproducts of poultry, game birds, or other birds from...

    Science.gov (United States)

    2010-01-01

    ... byproducts of poultry, game birds, or other birds from regions where highly pathogenic avian influenza (HPAI... THE UNITED STATES § 95.30 Restrictions on entry of products and byproducts of poultry, game birds, or other birds from regions where highly pathogenic avian influenza (HPAI) subtype H5N1 exists. (a...

  13. 9 CFR 311.38 - Meat and meat byproducts from livestock which have been exposed to radiation.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Meat and meat byproducts from... MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION DISPOSAL OF DISEASED OR OTHERWISE ADULTERATED CARCASSES AND PARTS § 311.38 Meat and meat byproducts from livestock which have been...

  14. 10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Manufacture and distribution of sources or devices... SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Generally Licensed Items § 32.74 Manufacture and distribution of sources or devices containing byproduct material for...

  15. Improved biomass utilization through the use of nuclear techniques

    International Nuclear Information System (INIS)

    1988-10-01

    Biomass is a major by-product resource of agriculture and food manufacturing, but it is under-utilized as a source of food, fibre, and chemicals. Nuclear techniques provide unique tools for studies of the capabilities of micro-organisms in methane digestor operation and in the transformation of lignocellulosic materials to useful products. Nuclear techniques have also been effectively employed as mutagenic agents in the preparation of more efficient microbial strains for the conversion of biomass. This report reviews the variety and diversity of such applications with focus on the development of microbial processes to utilize agricultural wastes and by-products. The value of nuclear techniques is manifestly demonstrated in the production of efficient microbial mutant strains, in the tracing of metabolic pathways, in the monitoring of lignin degradation and also of fermenter operation. Refs, figs and tabs

  16. Biofibres from biofuel industrial byproduct-Pongamia pinnata seed hull.

    Science.gov (United States)

    Manjula, Puttaswamy; Srinikethan, Govindan; Shetty, K Vidya

    2017-01-01

    Biodiesel production using Pongamia pinnata (P. pinnata) seeds results in large amount of unused seed hull. These seed hulls serve as a potential source for cellulose fibres which can be exploited as reinforcement in composites. These seed hulls were processed using chlorination and alkaline extraction process in order to isolate cellulose fibres. Scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR) analysis demonstrated the morphological changes in the fibre structure. Cellulose microfibres of diameter 6-8 µm, hydrodynamic diameter of 58.4 nm and length of 535 nm were isolated. Thermal stability was enhanced by 70 °C and crystallinity index (CI) by 19.8% ensuring isolation of crystalline cellulose fibres. The sequential chlorination and alkaline treatment stemmed to the isolation of cellulose fibres from P. pinnata seed hull. The isolated cellulose fibres possessed enhanced morphological, thermal, and crystalline properties in comparison with P. pinnata seed hull. These cellulose microfibres may potentially find application as biofillers in biodegradable composites by augmenting their properties.

  17. Investigation of soil potentially contaminated by monazite processing by-products: case study and suggestion for protocol

    International Nuclear Information System (INIS)

    Briquet, Claudia

    2006-01-01

    This work describes a characterization of soil potentially contaminated by monazite chemical processing residues. For case study it was selected a country area of Sao Paulo State, containing a monazite processing by-product depository. The main objective was to evaluate the soil contamination in an area of approximately 18,000 m 2 and esteem the total effective dose equivalent. During the development of this work, it was verified necessity of an investigation protocol, in order to standardize actions of regulatory authorities. A survey of the applicable legislation was carried out, as a tool to support decision making process. The methodology was based on the 'Manual de Gerenciamento de Areas Contaminadas' of CETESB (2001 a), a national document to guide studies of contaminated areas. It was also considered the 'Multi Agency Radiation Survey and Site Manual Investigation - MARSSIM' (2000), a U.S. government document that provides a nationally consensus approach to conduct investigations at potentially contaminated sites. The developed activities had been divided in three general stages: data-collecting and information on the place, identification of soil contamination and its distribution until the depth of 3 meters and evaluation of the associated dose. The evaluation of the radiological impact was carried out considering the worst-case use scenario (most restrictive future use), standing out that the final decision fits to the Brazilian National Nuclear Energy Commission - CNEN. CNEN's scope of responsibility includes determining the site release criteria and the cleanup necessity. (author)

  18. Potential of chicken by-products as sources of useful biological resources

    International Nuclear Information System (INIS)

    Lasekan, Adeseye; Abu Bakar, Fatimah; Hashim, Dzulkifly

    2013-01-01

    By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications

  19. 12 CFR 7.5004 - Sale of excess electronic capacity and by-products.

    Science.gov (United States)

    2010-01-01

    ... bank's needs for banking purposes include: (1) Data processing services; (2) Production and... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Sale of excess electronic capacity and by-products. 7.5004 Section 7.5004 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY...

  20. High value co-products from wine byproducts (II): polyphenols and antioxidant activity

    Energy Technology Data Exchange (ETDEWEB)

    Femenia, A.; Gonzalez-Centeno, M. R.; Garau, M. C.; Sastre-Serrano, G.; Rosello, C.

    2009-07-01

    The by-products of the grape/wine industry have recently attracted considerable interest as important sources of high-value antioxidants. these can be extracted from stems, such as resveratrol,and from grape pomace which contains polyphenols, procyanidin and antrocyanins. (Author)

  1. Advanced Byproduct Recovery: Direct Catalytic Reduction of Sulfur Dioxide to Elemental Sulfur.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    More than 170 wet scrubber systems applied, to 72,000 MW of U.S., coal-fired, utility boilers are in operation or under construction. In these systems, the sulfur dioxide removed from the boiler flue gas is permanently bound to a sorbent material, such as lime or limestone. The sulfated sorbent must be disposed of as a waste product or, in some cases, sold as a byproduct (e.g. gypsum). Due to the abundance and low cost of naturally occurring gypsum, and the costs associated with producing an industrial quality product, less than 7% of these scrubbers are configured to produce usable gypsum (and only 1% of all units actually sell the byproduct). The disposal of solid waste from each of these scrubbers requires a landfill area of approximately 200 to 400 acres. In the U.S., a total of 19 million tons of disposable FGD byproduct are produced, transported and disposed of in landfills annually. The use of regenerable sorbent technologies has the potential to reduce or eliminate solid waste production, transportation and disposal. In a regenerable sorbent system, the sulfur dioxide in the boiler flue gas is removed by the sorbent in an adsorber. The S0{sub 2}s subsequently released, in higher concentration, in a regenerator. All regenerable systems produce an off-gas stream from the regenerator that must be processed further in order to obtain a salable byproduct, such as elemental sulfur, sulfuric acid or liquid S0{sub 2}.

  2. Anaerobic co-digestion of agricultural by-products with manure, for enhanced biogas production

    DEFF Research Database (Denmark)

    Søndergaard, Marie M.; Fotidis, Ioannis; Kovalovszki, Adam

    2015-01-01

    Biogas is extensively promoted as a promising renewable energy. Therefore, the search of appropriate co-substrates has come into focus. In this study, we examined the potential of using agricultural byproducts as alternative co-substrates for increased biogas production. The biochemical methane p...

  3. Conversion of the biodiesel by-product glycerol by the non-conventional yeast Pachysolen tannophilus

    DEFF Research Database (Denmark)

    Liu, Xiaoying

    production process. Since the volume of the glycerol by-product has exceeded the current market need, biodiesel producers are looking for new methods for sustainable glycerol management and improving the competitiveness of the biodiesel industries. The EU Commission funded GLYFINERY project is one initiative...

  4. Olive oil enriched in lycopene from tomato by-product through a co-milling process.

    Science.gov (United States)

    Bendini, Alessandra; Di Lecce, Giuseppe; Valli, Enrico; Barbieri, Sara; Tesini, Federica; Toschi, Tullia Gallina

    2015-01-01

    The aim of this investigation was to produce an olive oil (OO) naturally enriched with antioxidants, recovering carotenoids, in particular lycopene, using an industrial by-product of tomato seeds and skin. For this purpose, a technological process in a low-scale industrial plant to co-mill olives and tomato by-product in de-frosted or freeze-dried forms was applied and studied with respect to control samples. Preliminary results obtained from two different experiments were carried out by 40 kg of cultivar Correggiolo olives and 60 kg of olive blends from different cultivars. In both the experiments, the co-milling showed significant enrichment in carotenoids, especially in lycopene (mean values of 5.4 and 7.2 mg/kg oil from defrosted and freeze-dried by-products, respectively). The experimental results demonstrated the possibility to obtain a new functional food naturally enriched in antioxidant compounds, which might be marketed as "OO dressing enriched in lycopene" or "condiment produced using olives and tomato by-product".

  5. Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

    DEFF Research Database (Denmark)

    Mortensen, Alicja; Granby, Kit; Eriksen, Folmer Damsted

    2014-01-01

    With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998-2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected ...

  6. Distillers by-product cattle diets enhance reduced sulfur gas fluxes from feedlot soils and manures

    Science.gov (United States)

    Total reduced sulfur (TRS) emissions from animal feeding operations are a concern with increased feeding of high-sulfur distillers by-products. Three feeding trials were conducted to evaluate feeding wet distillers grain plus solubles (WDGS) on TRS fluxes. Fresh manure was collected three times duri...

  7. By-product mutualism and the ambiguous effects of harsher environments - A game-theoretic model

    NARCIS (Netherlands)

    De Jaegher, Kris; Hoyer, Britta

    2016-01-01

    We construct two-player two-strategy game-theoretic models of by-product mutualism, where our focus lies on the way in which the probability of cooperation among players is affected by the degree of adversity facing the players. In our first model, cooperation consists of the production of a public

  8. Transposable elements in cancer as a by-product of stress-induced evolvability

    DEFF Research Database (Denmark)

    Mourier, Tobias; Nielsen, Lars P.; Hansen, Anders Johannes

    2014-01-01

    Transposable elements (TEs) are ubiquitous in eukaryotic genomes. Barbara McClintock's famous notion of TEs acting as controlling elements modifying the genetic response of an organism upon exposure to stressful environments has since been solidly supported in a series of model organisms. This re...... as an evolutionary by-product of organisms' abilities to genetically adapt to environmental stress....

  9. Secondary formation of disinfection by-products by UV treatment of swimming pool water

    DEFF Research Database (Denmark)

    Spiliotopoulou, Aikaterini; Hansen, Kamilla Marie Speht; Andersen, Henrik Rasmus

    2015-01-01

    Formation of disinfection by-products (DBPs) during experimental UV treatment of pool water has previously been reported with little concurrence between laboratory studies, field studies and research groups. In the current study, changes in concentration of seven out of eleven investigated volatile...

  10. Genotoxic Effects in Swimmers Exposed to Disinfection By-products in Indoor Swimming Pool

    Science.gov (United States)

    BACKGROUND: Exposure to disinfection by-products (DBPs) in drinking water has been associated with cancer risk, and a recent study found an increased bladder cancer risk among subjects attending swimming pools. OBJECTIVES: To evaluate whether swimming in pools is associated with ...

  11. Effect of Addition of Moringa Leaf By-Product (Leaf-Waste) on ...

    African Journals Online (AJOL)

    The effects of incorporation of Moringa leaf fibre (a by-product of leaf processing which contains 24% Crude Fibre by dry weight at 0, 5 and 10 % substitution of wheat flour in cookies was investigated. Three products containing wheat flour: Moringa leaf fibre ratios of 100:0, 95:5, and 90:10 respectively were prepared, and a ...

  12. Optimization and application of spray-drying process on oyster cooking soup byproduct

    Directory of Open Access Journals (Sweden)

    Huibin CHEN

    Full Text Available Abstract Oyster drying processes have produced a large amount of cooking soup byproducts. In this study, oyster cooking soup byproduct was concentrated and spray-dried after enzymatic hydrolysis to produce seasoning powder. Response surface methodology (RSM was performed on the basis of single-factor studies to optimize the feeding temperature, hot air temperature, atomization pressure, and total solid content of oyster drying. Results revealed the following optimized parameters of this process: feeding temperature of 60 °C, total solid content of 30%, hot air temperature of 197 °C, and atomization pressure of 92 MPa. Under these conditions, the oyster powder yield was 63.7% ± 0.7% and the moisture content was 4.1% ± 0.1%. Our pilot trial also obtained 63.1% yield and 4.0% moisture content. The enzyme hydrolysis of cooking soup byproduct further enhanced the antioxidant activity of the produced oyster seasoning powder to some extent. Spray drying process optimized by RSM can provide a reference for high-valued applications of oyster cooking soup byproducts.

  13. Torrefaction of agricultural by-products: Effects of temperature and time on energy yields

    Science.gov (United States)

    Agricultural by-products, such as apple, grape, olive, and tomato pomaces as well as almond and walnut shells, were torrefied at different temperatures and times. Torrefaction of biomass involves heating in an inert atmosphere to remove volatile components for improved grindability and increased ene...

  14. Energy costs of feeding excess protein from corn-based byproducts to finishing cattle

    Science.gov (United States)

    The increased use of byproducts in finishing diets leads to diets that contain greater concentrations of CP and MP than required by cattle. The hypothesis was that excess dietary CP and MP would increase maintenance energy requirments due to the energy costs of removing excess N as urea in urine. ...

  15. Catalytic pyrolysis of recalcitrant, insoluble humin byproducts from C6 sugar biorefineries

    NARCIS (Netherlands)

    Agarwal, Shilpa; van Es, Daan; Heeres, Hero Jan

    Humins are solid by-products formed during the acid-catalysed conversions of C-6 sugars to platform chemicals like hydroxymethylfurfural and levulinic acid. We here report an experimental study on the liquefaction/depolymerisation of humins using catalytic pyrolysis. Synthetic humins (SH) and crude

  16. Anaerobic co-digestion of by-products from sugar production with cow manure

    DEFF Research Database (Denmark)

    Fang, Cheng; Boe, Kanokwan; Angelidaki, Irini

    2011-01-01

    Sugar beet leaves (SBL), sugar beet top (SBT), sugar beet pulp (SBP) and desugared molasses (DM) are by-products from the sugar production. In the present study we investigated the potential of SBL, SBT and SBP as feedstock for biogas production. The maximum methane potential of SBL, SBT and SBP ......-digesting 50% of SBP with cow manure....

  17. Chemical stabilization of cadmium in acidic soil using alkaline agronomic and industrial by-products.

    Science.gov (United States)

    Chang, Yao-Tsung; Hsi, Hsing-Cheng; Hseu, Zeng-Yei; Jheng, Shao-Liang

    2013-01-01

    In situ immobilization of heavy metals using reactive or stabilizing materials is a promising solution for soil remediation. Therefore, four agronomic and industrial by-products [wood biochar (WB), crushed oyster shell (OS), blast furnace slag (BFS), and fluidized-bed crystallized calcium (FBCC)] and CaCO3 were added to acidic soil (Cd = 8.71 mg kg(-1)) at the rates of 1%, 2%, and 4% and incubated for 90 d. Chinese cabbage (Brassica chinensis L.) was then planted in the soil to test the Cd uptake. The elevation in soil pH caused by adding the by-products produced a negative charge on the soil surface, which enhanced Cd adsorption. Consequently, the diethylenetriamine pentaacetic acid (DTPA)-extractable Cd content decreased significantly (P soil. These results from the sequential extraction procedure indicated that Cd converted from the exchangeable fraction to the carbonate or Fe-Mn oxide fraction. The long-term effectiveness of Cd immobilization caused by applying the 4 by-products was much greater than that caused by applying CaCO3. Plant shoot biomass clearly increased because of the by-product soil amendment. Cd concentration in the shoots was soil.

  18. Chloraminated Concentrated Drinking Water for Disinfection Byproduct Mixtures Research: Evaluating Free Chlorine Contact Times

    Science.gov (United States)

    Complex mixtures of disinfection by-products (DBPs) are formed when the disinfectant oxidizes constituents (e.g., natural organic matter (NOM) and organic pollutants) present in the source water. Since 1974, over 600 DBPs have been identified in drinking water, yet a large portio...

  19. Chloramination of Concentrated Drinking Water for Disinfection Byproduct Mixtures Creation- Indianapolis

    Science.gov (United States)

    Complex mixtures of disinfection by-products (DBPs) are formed when the disinfectant oxidizes constituents (e.g., natural organic matter (NOM) and organic pollutants) found in the source water. Since 1974, over 600 DBPs have been identified in drinking water. Despite intense iden...

  20. Chloramination of Concentrated Drinking Water: Evaluation of Disinfection Byproduct Formation and Dosing Scenarios - Portland

    Science.gov (United States)

    Complex mixtures of disinfection by-products (DBPs) are formed when the disinfectant oxidizes constituents (e.g., natural organic matter (NOM) and organic pollutants) found in the source water. Since 1974, over 600 DBPs have been identified in drinking water. Despite intense iden...

  1. Effects of heat treatment on antioxidative and anti-inflammatory properties of orange by-products

    Science.gov (United States)

    This study investigated the changes in functional components, antioxidative activities, antibacterial activities, anti-inflammatory activities of orange (Citrus sinensis (L.) Osbeck) by-products (OBP) by heat treatment at 50 and 100 degrees C (hereafter, 50D and 100D extracts, respectively). Optimal...

  2. Glutamic acid production from wheat by-products using enzymatic and acid hydrolysis

    NARCIS (Netherlands)

    Sari, Y.W.; Alting, A.C.; Floris, R.; Sanders, J.P.M.; Bruins, M.E.

    2014-01-01

    Glutamic acid (Glu) has potential as feedstock for bulk chemicals production. It has also been listed as one of the top twelve chemicals derived from biomass. Large amounts of cheaper Glu can be made available by enabling its production from biomass by-products, such as wheat dried distillers grains

  3. Fish by-product meal in diets for commercial laying hens

    Directory of Open Access Journals (Sweden)

    André Ferreira Silva

    2017-07-01

    Full Text Available This study aimed to evaluate the increasing levels (0, 1, 2, 3 e 4% of fish by-product meal in diets for laying hens on performance, egg quality and economic analysis. A total of 160 Dekalb White hens with 52-wk old were distributed in a completely randomized design with five treatments and four replicates of eight birds each. The experiment lasted 84 days divided into four periods of 21 days. Estimates of fish by-product meal levels were determined by polynomial regression. Differences (p < 0.05 were detected for all variables of performance, in egg weight, yolk and albumen percentage, yolk and albumen height, feed cost and production cost, in which the inclusion of fish by-product meal in the diets showed better results. It can be concluded that fish by-product meal can be used in diets for hens as alternative feed, with better results in egg production, feed conversion, egg weight, yolk-albumen ratio and a reduction in feed cost and production cost.

  4. Literature mining supports a next-generation modeling approach to predict cellular byproduct secretion

    DEFF Research Database (Denmark)

    King, Zachary A.; O'Brien, Edward J.; Feist, Adam M.

    2017-01-01

    metabolic byproduct secretion with bottom-up reconstructions of metabolic networks. However, owing to a lack of data, it has not been possible to validate these predictions across a wide range of strains and conditions. Through literature mining, we were able to generate a database of Escherichia coli...

  5. Potential of chicken by-products as sources of useful biological resources

    Energy Technology Data Exchange (ETDEWEB)

    Lasekan, Adeseye [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Abu Bakar, Fatimah, E-mail: fatim@putra.upm.edu.my [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Hashim, Dzulkifly [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia)

    2013-03-15

    By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.

  6. Chemical and Nutritional Characteristics of long nose skate (Raja rhina) byproducts from Alaska

    Science.gov (United States)

    Skates have recently become a small commercial fishery in Alaska and along the western United States coast, but have long been associated with bycatch. The fins are marketed as "skate wings" and mainly sold fresh, frozen, and dried or salted and dehydrated for Asian markets. Byproducts generated inc...

  7. CONTROL OF MICROBIAL CONTAMINANTS AND DISINFECTION BY-PRODUCTS (DBPS): COST AND PERFORMANCE

    Science.gov (United States)

    The USEPA is in the process of developing a sophisticated regulatory strategy in an attempt to balance the complex trade-offs in risks associated with controlling disinfectants and disinfection by-products (D/DBPs) in drinking water. EPA first attempted to control DBPs in 1974, w...

  8. Batch Test Screening of Industrial Product/Byproduct Filter Materials for Agricultural Drainage Water Treatment

    Directory of Open Access Journals (Sweden)

    Barry J. Allred

    2017-10-01

    Full Text Available Filter treatment may be a viable means for removing the nitrate (NO3−, phosphate (PO43−, and pesticides discharged with agricultural drainage waters that cause adverse environmental impacts within the U.S. on local, regional, and national scales. Laboratory batch test screening for agricultural drainage water treatment potential was conducted on 58 industrial product/byproduct filter materials grouped into six categories: (1 high carbon content media; (2 high iron content media; (3 high aluminum content media; (4 surfactant modified clay/zeolite; (5 coal combustion residuals; and (6 spent foundry sands. Based on a percent contaminant removal criteria of 75% or greater, seven industrial products/byproducts were found to meet this standard for NO3− alone, 44 met this standard for PO43−, and 25 met this standard for the chlorinated triazine herbicide, atrazine. Using a 50% or greater contaminant removal criteria, five of the industrial product/byproduct filter materials exhibited potential for removing NO3−, PO43−, and atrazine together; eight showed capability for combined NO3− and PO43− removal; 21 showed capability for combined PO43− and atrazine removal; and nine showed capability for combined NO3− and atrazine removal. The results of this study delineated some potential industrial product/byproduct filter materials for drainage water treatment; however, a complete feasibility evaluation for drainage water treatment of any of these filter materials will require much more extensive testing.

  9. Bioenergy by-products as soil amendments? Implications for carbon sequestration and greenhuise gas emissions

    NARCIS (Netherlands)

    Cayuela, M.L.; Oenema, O.; Kuikman, P.J.; Bakker, R.R.; Groenigen, van J.W.

    2010-01-01

    An important but little understood aspect of bioenergy production is its overall impact on soil carbon (C) and nitrogen (N) cycling. Increased energy production from biomass will inevitably lead to higher input of its by-products to the soil as amendments or fertilizers. However, it is still unclear

  10. Agricultural and food processing byproducts from the Balearic Islands: key and traditional production processes

    International Nuclear Information System (INIS)

    Femenia, A.; Gonzalez-Centeno, M. R.; Garau, M. C.; Sastre-Serrano, G.; Rosello, C.

    2009-01-01

    The amounts of residues and byproducts, obtained from agricultural processes, in the Balearic Islands has undergone a marked increase during the last years. for economics as well as environmental reasons, there is a continuous pressure to exploit such residues and to identify products with attractive properties and with potential markets. (Author)

  11. Environmental and personal determinants of the uptake of disinfection by-products during swimming

    NARCIS (Netherlands)

    Font-Ribera, Laia; Kogevinas, Manolis; Schmalz, Christina; Zwiener, Christian; Marco, Esther; Grimalt, Joan O; Liu, Jiaqi; Zhang, Xiangru; Mitch, William; Critelli, Rossana; Naccarati, Alessio; Heederik, Dick; Spithoven, Jack; Arjona, Lourdes; de Bont, Jeroen; Gracia-Lavedan, Esther; Villanueva, Cristina M

    BACKGROUND: Trihalomethanes (THMs) in exhaled breath and trichloroacetic acid (TCAA) in urine are internal dose biomarkers of exposure to disinfection by-products (DBPs) in swimming pools. OBJECTIVE: We assessed how these biomarkers reflect the levels of a battery of DBPs in pool water and

  12. In Vitro Iron Bioavailability of Brazilian Food-Based by-Products.

    Science.gov (United States)

    Chiocchetti, Gabriela M; De Nadai Fernandes, Elisabete A; Wawer, Anna A; Fairweather-Tait, Susan; Christides, Tatiana

    2018-05-16

    Background : Iron deficiency is a public health problem in many low- and middle-income countries. Introduction of agro-industrial food by-products, as additional source of nutrients, could help alleviate this micronutrient deficiency, provide alternative sources of nutrients and calories in developed countries, and be a partial solution for disposal of agro-industry by-products. Methods : The aim of this study was to determine iron bioavailability of 5 by-products from Brazilian agro-industry (peels from cucumber, pumpkin, and jackfruit, cupuaçu seed peel, and rice bran), using the in vitro digestion/ Caco-2 cell model; with Caco-2 cell ferritin formation as a surrogate marker of iron bioavailability. Total and dialyzable Fe, macronutrients, the concentrations of iron-uptake inhibitors (phytic acid, tannins, fiber) and their correlation with iron bioavailability were also evaluated. Results : The iron content of all by-products was high, but the concentration of iron and predicted bioavailability were not related. Rice bran and cupuaçu seed peel had the highest amount of phytic acid and tannins, and lowest iron bioavailability. Cucumber peels alone, and with added extrinsic Fe, and pumpkin peels with extrinsic added iron, had the highest iron bioavailability. Conclusion : The results suggest that cucumber and pumpkin peel could be valuable alternative sources of bioavailable Fe to reduce iron deficiency in at-risk populations.

  13. Quality of crude fish oil extracted from herring byproducts of varying states of freshness

    NARCIS (Netherlands)

    Aidos, I.M.; Padt, van der A.; Boom, R.M.; Luten, J.B.

    2003-01-01

    Herring byproducts were stored at 2 and 15degreesC for up to 72 h. Over time, significant increases of total volatile bases (TVB), histamine, putrescine, cadaverine, and tyramine were detected. However, only tyramine and TVB levels were temperature-dependent. The level of total polyunsaturated

  14. Application of glass recycling by-products in Autoclaved Aerated Concrete

    NARCIS (Netherlands)

    Straub, Chr.; Florea, M.V.A.; Brouwers, H.J.H.; Schmidt, Wolfram; Msinjili, Nsesheye Susan

    Autoclaved Aerated Concrete (AAC) is a construction material with a large range of applications. In order to generate more sustainable materials, the possibility of the incorporation of by-products and left-over-materials from various processes is investigated. The focus of this research is the

  15. Radioactivity distribution in phosphate products, by-products, effluents, and wastes

    International Nuclear Information System (INIS)

    Guimond, R.J.; Windham, S.T.

    1975-08-01

    Phosphate rock throughout the world contains uranium in concentrations ranging from a few ppM to a few hundred ppM. In the United States, phosphate rock normally contains between 100 to 150 ppM uranium. Mining and processing of these ores redistributes much of the uranium daughters among the various products, by-products, and wastes. These materials are then widely dispersed throughout the environment. This redistribution may lead to increased exposure of the public to these naturally-occurring radionuclides. In determining the magnitude of the population exposure caused by this redistribution and in developing environmental standards and controls to prevent contamination of the biosphere from these naturally-occurring radionuclides it is necessary to determine the concentrations and total quantities of these radionuclides in the products, by-products, effluents and wastes of phosphate mining and manufacturing. Samples of phosphate ores, products, by-products, effluents, and wastes were obtained and analyzed for their radioactivity content. Quantities of radioactivity entering the environment through various products, by-products, effluents, and wastes were estimated

  16. Formation of Toxic Iodinated Disinfection By-Products from Compounds Used in Medical Imaging

    Science.gov (United States)

    Iodinated X-ray contrast media (ICM) were investigated as a source of iodine in the formation of iodo-trihalomethane (iodo-THM) and iodo-acid disinfection byproducts (DBPs), both of which are highly genotoxic and/or cytotoxic in mammalian cells. ICM are widely used at medical cen...

  17. The production and utilization of by-product agricultural fertilizer from flue gases

    International Nuclear Information System (INIS)

    Frank, N.W.; Hirano, S.

    1992-01-01

    The electron-beam process is one of the most effective methods for removing SO 2 and NO X from industrial flue gases and producing a usable by-product. This paper surveys the potential for production and consumption of alternative, usable, commercial by-products, in conjunction with major reductions in the inventory of emissions of SO 2 and NO X . An examination is made of the important limitations in the annual consumptive use or price of and/or net revenues from commonplace, electric utility, by-product types such as gypsum, sulfuric acid, etc. A principal focus of the work is an analysis and quantification of the major large-scale, growing and profitable markets for utility solid wastes that can be generated in agricultural fertilizer forms, including ammonium sulfate and other compounds that are available through stack-gas cleaning operations at large, coal-fired boilers. Cost study data is arranged to define the impact of commercial by-product yield and revenue on the economics of full scale SO 2 and NO X emission reduction activity. (author)

  18. ANALYTICAL METHODS FOR WATER DISINFECTION BY-PRODUCTS IN FOODS AND BEVERAGES

    Science.gov (United States)

    The determination of exposure to drinking water disinfection byproducts (DBPs) requires an understanding of how drinking water comes in contact with humans through multiple pathways. In order to facilitate the investigation of human exposure to DBPs via foods and beverages, analy...

  19. The sixth international congress on toxic combustion byproducts. Technical program and abstract book

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Topics of this proceedings volume are: technical approaches - waste treatment; general toxicology of combustion byproducts; reaction mechanisms (e.g. formation and decomposition of hydrocarbons and chlorinated hydrocarbons, nitrogen oxides); thermal treatment - reactionas at low temperatures; heterogeneous reactions - heterogeneous systems. (SR)

  20. 10 CFR 32.18 - Manufacture, distribution and transfer of exempt quantities of byproduct material: Requirements...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Manufacture, distribution and transfer of exempt... COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Exempt Concentrations and Items § 32.18 Manufacture, distribution and transfer of exempt quantities of...

  1. Characterization of Animal By-Product Hydrolysates to Be Used as Healthy and Bioactive Ingredients in Food

    DEFF Research Database (Denmark)

    Damgaard, Trine Desiree

    The world meat production and consumption has increased rapidly over the last couple of decades, due to population and income growth. In contrast to the meat, the consumption of animal by-products has been declining, leaving large amounts of by-products underutilized. As many by-products are highly...... nutritious as well as being good sources of protein, they represent interesting substrates for the generation of bioactive hydrolysates and peptides. Different porcine and bovine by-products were hydrolysed with a mixture consisting of Alcalase®and Protamex, and tested in relation to antioxidant capacity...... and their “meat factor” effect, i.e. their ability to enhance in vitro iron availability. Hydrolysates of different animal by-products displayed antioxidant capacities as observed by several assays intended to test different antioxidant mechanisms. The radical scavenging capacity of the hydrolysates was found...

  2. Total Content of Phenolics and Antioxidant Activity in Crispbreads with Plant By-product addition

    Directory of Open Access Journals (Sweden)

    Konrade Daiga

    2017-11-01

    Full Text Available Vegetable processing in food industry results in significant amount of by-products – peel, mark, bark, seeds still rich in bioactive compounds. Apple, carrot and pumpkin peel and mark may be used for production of crispbreads as functional ingredients. The objective of this study is to investigate the stability of total phenolic content (TPC and antioxidant activity after high temperature and short time (HTST extrusion cooking of a wheat and rice-based crispbreads with addition of apple, carrot and pumpkin by-products obtained after juice extraxtion and dried. Raw materials for crispbread production were wheat flour, rice flour, wheat bran (72%, 24% and 4% respectively with addition of microwave–vacuum dried by-product powder in different amount (5%, 10%, 15%, 20%. Extrusion process was performed by using a laboratory singlescrew extruder GÖTTFERT 1 screw Extrusiometer L series (Germany. Total phenolic content (TPC was determined using the Folin Ciocalteu method. Antioxidant activity was evaluated by free radical 2, 2-diphenyl-1-picrylhydrazyl (DPPH antioxidant scavenging activity using a modified colorimetric method. Comparing different raw formulations, it was observed that the TPC of the apple by-product flour was significantly higher (p < 0.05 than in carrot and pumpkin flour. TPC in cereal-based crispbread was 36.06±1.15 before extrusion and 13.90±1.01 mg GAEg-1 DW (milligram Gallic acid equivalent per 100 g of dry weight (mg GAE 100 g−1 DW after extrusion. Addition of apple BPF increased TPC in crispbreads to 106.25±2.08, carrot BPF 84.73±3.45 and pumpkin BPF to 108.82±1.04 mg GAEg−1 DW. Antioxidant activity of control sample was 1.07±0.01mg TE (Trolox equivalents g−1 DW but in samples with addition of 20% apple by-products, it reached 3.77±0.02 TE g−1 DW for samples wih 20% carrot by-products reached 2.52±0.03TE g−1 DW and for samples wih 20% pumpkin by-products reached 3.77±0.02 TE g−1 DW.

  3. By-products formation during degradation of isoproturon in aqueous solution. II: Chlorination.

    Science.gov (United States)

    Mascolo, G; Lopez, A; James, H; Fielding, M

    2001-05-01

    After a previous study in which the considered oxidant was ozone (Part I), a laboratory investigation has been carried out to study the degradation of the herbicide isoproturon during its reaction with another oxidant, i.e. chlorine, in aqueous solution (Part II; this paper). The specific aim was to identify the by-products formed. The effects of pH and the presence of bromide ions were studied. Reactions have been carried out at room temperature, in phosphate buffered aqueous solutions, at four pHs (6, 7, 8 and 9). By-products identification was first performed using relatively high initial reagent concentrations which were analytically convenient ([isoproturon] = 40 mg/l, [HClO + ClO-] = 160 mg Cl/l, [Br-] = 80 mg/l). In follow-up studies, the by-products identified during this preliminary step were searched for when using concentration values closer to those actually encountered at real water treatment plants ([isoproturon] = 0.4 and 0.004 mg/l, [HClO + ClO-] = 1.6 mg Cl/l, [Br-] = 0.8 and 0.008 mg/l). Under all of the studied conditions, the results showed that isoproturon is completely degraded and that it decays much faster in the presence of bromide. The pH has a negligible influence when bromide ions are absent. On the contrary, if bromide ions are present, the isoproturon decay is slower at higher pH values. High-performance liquid chromatography-mass spectrometry (HPLC-MS) analyses have led to the identification of several by-products as a result of simultaneous oxidation and substitution reactions, both occurring on the aromatic ring of the herbicide. However, the more abundant by-products are those resulting from the oxidation of the isoproturon aromatic ring. As far as halogenated by-products are concerned, the higher the bromide ion concentration the higher the ratio of brominated to chlorinated by-products. On the basis of the analytical results, a pathway for isoproturon degradation under the studied conditions is proposed.

  4. Biofuels and their by-products: Global economic and environmental implications

    International Nuclear Information System (INIS)

    Taheripour, Farzad; Hertel, Thomas W.; Tyner, Wallace E.; Beckman, Jayson F.; Birur, Dileep K.

    2010-01-01

    Recently a number of papers have used general equilibrium models to study the economy-wide and environmental consequences of the first generation of biofuels (FGB). In this paper, we argue that nearly all of these studies have overstated the impacts of FGB on global agricultural and land markets due to the fact that they have ignored the role of biofuel by-products. Feed by-products of FGB, such as dried distillers grains with solubles (DDGS) and oilseed meals (VOBP), are used in the livestock industry as protein and energy sources. Their presence mitigates the price impacts of biofuel production. More importantly, they reduce the demand for cropland and moderate the indirect land use consequences of FGB. This paper explicitly introduces DDGS and VOBP into a global computational general equilibrium (CGE) model, developed at the Center for Global Trade Analysis at Purdue University, to examine the economic and environmental impacts of regional and international mandate policies designed to stimulate bioenergy production and use. We show that models with and without by-products reveal different portraits of the economic impacts of the US and EU biofuel mandates for the world economy in 2015. While both models demonstrate significant changes in the agricultural production pattern across the world, the model with by-products shows smaller changes in the production of cereal grains and larger changes for oilseeds products in the US and EU, and the reverse for Brazil. Models that omit by-products are found to overstate cropland conversion from US and EU mandates by about 27%. (author)

  5. improving citric acid production from some carbohydrates by-products using irradiated aspergillus niger

    International Nuclear Information System (INIS)

    Farag, S.S.

    2011-01-01

    Twenty strains of A. niger were isolated from different sources, screened for their capacity to produce citric acid. All the isolated strains were able to produce citric acid in different quantities at different time intervals i.e. 4, 8 and 12 days on indicator medium. The best incubation period for production for all isolates was 12 days. The most potent strains for production were A 1 , A 4 and A 5 , while A 8 , A 1 6, A 18 and A 19 recorded weak production on that medium. Citric acid productivity were obtained by all strains when using different concentrations of four carbohydrate by-products (maize straw, potato peel wastes, sugar beet pulp and molasses) when each used alone without any additions after 12 days incubation and the production enhanced when the fermentation medium amended with the same concentrations of the mentioned substrates. Type and concentration of carbohydrate by-product affect the production of citric acid by A. niger strains under the study. Increasing substrate concentration led to increase in production, the best concentration for production was 25% for all carbohydrate by-products. As recorded with indicator medium, A 1 , A 4 and A 5 are also the most potent strains for production when growing on the four carbohydrate by-products supplemented to the basal medium, while A 8 , A 6 , A 18 and A 19 recorded the weak production with the carbohydrate by-products used.production of the parental isolates A 1 , A 4 and A 5 on indicator medium were: 0.96, 0.95 and 0.99 (mg/ml) respectively after 12 days incubation, while maximum production by the obtaining resulting isolates (Treated by UV irradiation) were: 1.78, 1.70 and 1.73 (mg/ml) from A 4 T 2 (5 min.), A 4 T 1 (10 min.) and A 1 T 1 (5 min.), respectively.

  6. Vegan-mycoprotein concentrate from pea-processing industry byproduct using edible filamentous fungi.

    Science.gov (United States)

    Souza Filho, Pedro F; Nair, Ramkumar B; Andersson, Dan; Lennartsson, Patrik R; Taherzadeh, Mohammad J

    2018-01-01

    Currently around one billion people in the world do not have access to a diet which provides enough protein and energy. However, the production of one of the main sources of protein, animal meat, causes severe impacts on the environment. The present study investigates the production of a vegan-mycoprotein concentrate from pea-industry byproduct (PpB), using edible filamentous fungi, with potential application in human nutrition. Edible fungal strains of Ascomycota ( Aspergillus oryzae , Fusarium venenatum , Monascus purpureus , Neurospora intermedia ) and Zygomycota ( Rhizopus oryzae ) phyla were screened and selected for their protein production yield. A. oryzae had the best performance among the tested fungi, with a protein yield of 0.26 g per g of pea-processing byproduct from the bench scale airlift bioreactor cultivation. It is estimated that by integrating the novel fungal process at an existing pea-processing industry, about 680 kg of fungal biomass attributing to about 38% of extra protein could be produced for each 1 metric ton of pea-processing byproduct. This study is the first of its kind to demonstrate the potential of the pea-processing byproduct to be used by filamentous fungi to produce vegan-mycoprotein for human food applications. The pea-processing byproduct (PpB) was proved to be an efficient medium for the growth of filamentous fungi to produce a vegan-protein concentrate. Moreover, an industrial scenario for the production of vegan-mycoprotein concentrate for human nutrition is proposed as an integrated process to the existing PPI production facilities.

  7. Effects of an onion by-product on bioactivity and safety markers in healthy rats.

    Science.gov (United States)

    Roldán-Marín, Eduvigis; Krath, Britta N; Poulsen, Morten; Binderup, Mona-Lise; Nielsen, Tom H; Hansen, Max; Barri, Thaer; Langkilde, Søren; Cano, M Pilar; Sánchez-Moreno, Concepción; Dragsted, Lars O

    2009-12-01

    Onions are excellent sources of bioactive compounds including fructo-oligosaccharides (FOS) and polyphenols. An onion by-product was characterised in order to be developed as a potentially bioactive food ingredient. Our main aim was to investigate whether the potential health and safety effects of this onion by-product were shared by either of two derived fractions, an extract containing the onion FOS and polyphenols and a residue fraction containing mainly cell wall materials. We report here on the effects of feeding these products on markers of potential toxicity, protective enzymes and gut environment in healthy rats. Rats were fed during 4 weeks with a diet containing the products or a control feed balanced in carbohydrate. The onion by-product and the extract caused anaemia as expected in rodents for Allium products. No other toxicity was observed, including genotoxicity. Glutathione reductase (GR) and glutathione peroxidase (GPx1) activities in erythrocytes increased when rats were fed with the onion extract. Hepatic gene expression of Gr, Gpx1, catalase, 5-aminolevulinate synthase and NAD(P)H:quinone oxidoreductase was not altered in any group of the onion fed rats. By contrast, gamma-glutamate cysteine ligase catalytic subunit gene expression was upregulated but only in rats given the onion residue. The onion by-products as well as the soluble and insoluble fractions had prebiotic effects as evidenced by decreased pH, increased butyrate production and altered gut microbiota enzyme activities. In conclusion, the onion by-products have no in vivo genotoxicity, may support in vivo antioxidative defence and alter the functionality of the rat gut microbiota.

  8. Formation of undesired by-products in deNO{sub x} catalysis by hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Radtke, Frank; Koeppel, Rene A; Baiker, Alfons [Department of Chemical Engineering and Industrial Chemistry, Swiss Federal Institute of Technology, ETH-Zentrum, Zuerich (Switzerland)

    1995-11-20

    The catalytic performance of Cu/ZSM-5 and {gamma}-alumina in the selective catalytic reduction of nitrogen oxides by alkenes in excess oxygen and the formation of potentially harmful by-products such as hydrogen cyanide, cyanic acid, ammonia, nitrous oxide and carbon monoxide have been studied by means of FT-IR-gas phase analysis. Over Cu/ZSM-5 the reduction activity was strongly influenced by the type of hydrocarbon, while there was no significant difference when starting from NO or NO{sub 2}. In contrast, with {gamma}-alumina NO{sub 2} was reduced more efficiently than NO with both reductants. Water addition strongly suppressed the catalytic activity of {gamma}-alumina. Regarding the formation of undesired by-products, substantial amounts of carbon monoxide were observed in all experiments, independently of the feed composition. The type of catalyst, the use of either NO or NO{sub 2}, the alkene used as a reductant and water strongly influenced the formation of other by-products. With alumina ethene showed a lower tendency to form HCN as compared to propene and water addition further suppressed by-product formation. This contrasts the findings with Cu/ZSM-5, where HCN production was not significantly altered by the presence of water. On this catalyst HNCO was found additionally for dry feeds, whereas ammonia appeared in the presence of water in the same temperature range. Under special feed gas compositions further by-products, formaldehyde and hydrocarbons, were found over Cu/ZSM-5, whereas none of these compounds were observed over {gamma}-alumina

  9. Use of clean coal technology by-products as agricultural liming techniques

    Energy Technology Data Exchange (ETDEWEB)

    Stehouwer, R.C.; Sutton, P.; Dick, W.A. [Ohio Agricultural Research and Development Center, Wooster, OH (United States). Dept. of Agronomy

    1995-03-01

    Dry flue gas desulfurization (FGD) by-products are mixtures of coal fly-ash, anhydrite (CaCO{sub 4}), and unspent lime- or limestone-based sorbent. Dry FGD by-products frequently have neutralizing values greater than 50% CaCO{sub 3} equivalency and thus have potential for neutralizing acidic soils. Owing to the presence of soluble salts and various trace elements, however, soil application of dry FGD by-products may have adverse effects on plant growth and soil quality. The use of a dry FGD by-product as a limestone substitute was investigated in a field study on three acidic agricultural soils (pH 4.6, 4.8, and 5.8) in eastern Ohio. The by-product (60% CaCO{sub 3} equivalency) was applied in September, 1992, at rates of 0, 0.5, 1.0, and 2.0 times the lime requirement of the soils, and alfalfa (Medicago sativa L.) and corn (Zea mays L.) were planted. Soils were sampled immediately after FGD application and three more times every six months thereafter. Samples were analyzed for pH and water soluble concentrations of 28 elements. Soil pH was increased by all FGD rates in the zone of incorporation (0--10 cm), with the highest rates giving a pH slightly above 7. Within one year pH increases could be detected at depths up to 30 cm. Calcium, Mg, and S increased, and Al, Mn, and Fe decreased with increasing dry FGD application rates. No trace element concentrations were changed by dry FGD application except B which was increased in the zone of incorporation. Dry FGD increased alfalfa yield on all three soils, and had no effect on corn yield. No detrimental effects on soil quality were observed.

  10. Nuclear waste: A cancer cure?

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    In a marriage of strange bedfellows, scientists at one of the country's most contaminated nuclear waste sites are collaborating with medical researchers to turn nuclear waste into an experimental therapy for cancer. Patients with Hodgkin's disease and brain, ovarian, and breast cancers may be able to receive the new radiatio-based treatments in the next five to ten years. Recently, scientists at the Hanford site found a way to chemically extract a pure form of the radioisotope yttrium-90 from strontium-90, a by-product of plutonium production. Yttrium-90 is being tested in clinical trials at medical centers around the country as a treatment for various types of cancers, and the initial results are encouraging. The advantage of yttrium-90 over other radioisotopes is its short half-life

  11. [Nuclear theory

    International Nuclear Information System (INIS)

    Haxton, W.

    1990-01-01

    This report discusses research in nuclear physics. Topics covered in this paper are: symmetry principles; nuclear astrophysics; nuclear structure; quark-gluon plasma; quantum chromodynamics; symmetry breaking; nuclear deformation; and cold fusion

  12. Utilization of byproducts from potatoes and vegetables for value-added products; Perunan ja vihannesten sivuvirtojen arvokomponenttien hyoetykaeyttoe

    Energy Technology Data Exchange (ETDEWEB)

    Ahokas, M.; Valimaa, A.-L.; Kankaala, A.; Lotjonen, T.; Virtanen, E.

    2012-07-01

    In this report, by-products are defined as the fractions produced in processing of potatoes and vegetables in addition to the main products. These by-products include peels, potato pulp, potato fruit juice, leftovers from cutting processes and under-sized potatoes left in the field. The amount of the by-products varies depending on the process. For example, in peeling processes the amount of by-products can be as much as 50-100% compared to that of the peeled product. The disposal of the by-products is strictly regulated by the national biowaste strategy, the landfill directive and the new waste legislation. For example, the landfill directive requires a gradual reduction in the amount of biodecomposable community waste. This means that in 2016, an maximum of 25% of the estimated biodecomposable community waste produced can be placed in landfill sites. Moreover, the EU aims at increasing the amount of the renewable traffic fuels to 10% by the year 2020. The utilization of the by-products in an effective and holistic way is not necessary only due to the tight legislative demands, but also n order to make the production economically profitable. For example, it is possible to separate from by-products of potatoes and vegetables commercially valuable biocomponents, such as starch, proteins and fiber, and to produce bioethanol and biogas in biorefinery plants. In the biorefinery plants, chemicals, biofuels and energy are produced sustainably using mechanical, chemical and biological processes. However, in a conventional refinery process usually only one component is utilized, for example potato starch. The North Ostrobothnia region is lacking the biorefinery that utilizes the by-products of potatoes and vegetables. This study was carried out in 2011-2012 by MTT Agrifood Research Finland Oulu. The objective was to develop a biorefinery concept in which by-products from potato and vegetables industry are manufactured to value-added products efficiently utilizing the

  13. Nuclear topics

    International Nuclear Information System (INIS)

    Lukner, C.

    1982-07-01

    The pamphlet touches on all aspects of nuclear energy, from the world energy demands and consumption, the energy program of the Federal Government, nuclear power plants in the world, nuclear fusion, nuclear liability up to the nuclear fuel cycle and the shutdown of nuclear power plants. (HSCH) [de

  14. Nuclear power and nuclear weapons

    International Nuclear Information System (INIS)

    Vaughen, V.C.A.

    1983-01-01

    The proliferation of nuclear weapons and the expanded use of nuclear energy for the production of electricity and other peaceful uses are compared. The difference in technologies associated with nuclear weapons and nuclear power plants are described

  15. Radiation preservation of fish and by-products

    Energy Technology Data Exchange (ETDEWEB)

    Vas, K

    1974-07-01

    The desirability of making the irradiation of fish and fishery products the subject of common experiments in the South and South East Asian and Far East region was based on studies carried out in various laboratories in the region, as well as the findings of a Technical Assistance Mission to the area in 1971/72, and an FAO/IAEA Study Group Meeting on Food Irradiation in Bangkok (1971). As a result, fish preservation by irradiation was among the first topics suggested for collaborative studies under the IAEA-sponsored Regional Agreement for Research, Development and Training Related to Nuclear Science and Technology (RCA), which became operational in June 1972. Following an FAO/IAEA Panel meeting on Aspects of the Introduction of Food Irradiation in Developing Countries at Bombay, in November 1972, it was suggested that collaborative fish irradiation studies be initiated as the first regional project under the RCA. A meeting of scientists authorized to represent the Governments willing to participate in the venture, was recommended. This plan was accepted by an informal meeting of Government Representatives on the future of the RCA held during the 17th Session of the General Conference of the IAEA in Vienna in 1973. The offer of the Philippine Government to host the initiating meeting was accepted, and the Working Group to launch the Asian Regional Project on Radiation Preservation of Fish and Fishery Products (RPF) met in November 1973 in Manila. This meeting was attended by representatives of Bangladesh, India, Indonesia, Korea, Pakistan, the Philippines, Singapore and Thailand. The Federal Republic of Germany and Japan sent observers who also served as consultants and greatly contributed to the scientific deliberations. The Working Group accepted a Project Agreement draft which foresees regional co-ordination of the scientific programme by common planning, distribution of labour and reporting at annual co-ordination meetings. To achieve these goals, the

  16. Radiation preservation of fish and by-products

    International Nuclear Information System (INIS)

    Vas, K.

    1974-01-01

    The desirability of making the irradiation of fish and fishery products the subject of common experiments in the South and South East Asian and Far East region was based on studies carried out in various laboratories in the region, as well as the findings of a Technical Assistance Mission to the area in 1971/72, and an FAO/IAEA Study Group Meeting on Food Irradiation in Bangkok (1971). As a result, fish preservation by irradiation was among the first topics suggested for collaborative studies under the IAEA-sponsored Regional Agreement for Research, Development and Training Related to Nuclear Science and Technology (RCA), which became operational in June 1972. Following an FAO/IAEA Panel meeting on Aspects of the Introduction of Food Irradiation in Developing Countries at Bombay, in November 1972, it was suggested that collaborative fish irradiation studies be initiated as the first regional project under the RCA. A meeting of scientists authorized to represent the Governments willing to participate in the venture, was recommended. This plan was accepted by an informal meeting of Government Representatives on the future of the RCA held during the 17th Session of the General Conference of the IAEA in Vienna in 1973. The offer of the Philippine Government to host the initiating meeting was accepted, and the Working Group to launch the Asian Regional Project on Radiation Preservation of Fish and Fishery Products (RPF) met in November 1973 in Manila. This meeting was attended by representatives of Bangladesh, India, Indonesia, Korea, Pakistan, the Philippines, Singapore and Thailand. The Federal Republic of Germany and Japan sent observers who also served as consultants and greatly contributed to the scientific deliberations. The Working Group accepted a Project Agreement draft which foresees regional co-ordination of the scientific programme by common planning, distribution of labour and reporting at annual co-ordination meetings. To achieve these goals, the

  17. Nuclear legislation system and nuclear program outlook in Thailand

    International Nuclear Information System (INIS)

    Charoensri, Apisara; Morev, Mikhail N.; Imazu, Hidenori; Kosako, Toshiso; Iimoto, Takeshi

    2009-01-01

    In Thailand, radioactive materials are widely used for the industry, medicine, research and development fields. Reported here are background and recent developments in the national nuclear legislation system, including regulation of radiation safety and current status of nuclear program in Thailand. Under the Atomic Energy for Peace Act, the Thai Atomic Energy Commission (Thai AEC) is authorized to approve regulations respecting, the conversion, enrichment, processing, reprocessing, possession, import, export, use, packaging, transport, management and storage of nuclear materials. The most recent developments are related to the New Ministerial Regulation on Licensing Requirements Procedures and Nuclear Material, By-Product or Atomic Energy Processing B. E 2550 (A. D. 2007) issued under the Atomic Energy for Peace Act, B. E. 2504 (A. D. 1961). Currently, the Thai Cabinet is discussing the draft new Atomic Energy for Peace Act which is to revise the Act. The draft Act is to sets forth criteria for protecting individuals, society and the environment from radiation hazards with the perspective for anticipated nuclear power sector development in Thailand. (author)

  18. 40 CFR 63.7291 - What work practice standards must I meet for fugitive pushing emissions if I have a by-product...

    Science.gov (United States)

    2010-07-01

    ... meet for fugitive pushing emissions if I have a by-product coke oven battery with vertical flues? 63... meet for fugitive pushing emissions if I have a by-product coke oven battery with vertical flues? (a... existing by-product coke oven battery with vertical flues. (1) Observe and record the opacity of fugitive...

  19. Performance and characteristics of carcass and non-carcass components of lambs fed peach-palm by-product.

    Science.gov (United States)

    dos Santos Cabral, Ícaro; Azevêdo, José Augusto Gomes; de Almeida, Flávio Moreira; Pereira, Luiz Gustavo Ribeiro; de Araújo, Gherman Garcia Leal; dos Santos Cruz, Cristiane Leal; Nogueira, Abdon Santos; Souza, Lígia Lins; de Oliveira, Gisele Andrade

    2013-11-01

    The objective of this study was to evaluate the effects of supplying the by-product of peach-palm (Bactris gasipaes) on performance and characteristics of carcass and non-carcass components of feedlot lambs. Twenty Santa Ines lambs of 150 days average age and 22.4 ± 3.4 kg body weight were confined in individual pens. A completely randomized design was utilized with four experimental diets composed of: fresh peach-palm by-product enriched with urea, fresh peach-palm by-product + concentrate, silage of peach-palm by-product + concentrate, and silage of peach-palm by-product enriched with 15 % corn meal + concentrate. Intake was evaluated daily, and at the end of 42 days of experiments, lambs were slaughtered and the characteristics of carcass and non-carcass parts were evaluated. Performance and carcass characteristics showed differences between the animals' intake of total mixed rations (TMR) and only the diet with roughage. For the lambs that intaked TMR, the form of utilization of roughage (fresh or as silage) affected animal performance but did not change the carcass characteristics. Dry matter intake and feed conversion were influenced by the form of utilization of the silage (with and without additive). Providing fresh by-product plus concentrate improves lamb performance but does not interfere in the carcass characteristics, compared with the use of by-product in the form of silage.

  20. Effect Of Dried Olive Oil By-Product Supplementation To Ration On The Performance Of Local Ewes And Their Lambs

    International Nuclear Information System (INIS)

    Mustafa, M.M.M.

    2011-01-01

    The effects of dried olive oil by-products (0, 15 and 30% replacement) on the performance of lactating local ewes and their lambs are the main object of this study. Biochemical, physiological and toxicological aspects, and the safety environmental clearance and fed supplementation of olive oil by-products in ewes feeding are also studied. Moreover, the economic value of olive oil by-products replacement in addition may participate partially in ruminant feeding in Egypt. In the present study, twenty four local dairy ewes at the end of pregnancy (1 weeks before parturition) were used in the 3 experimental diets with 0, 15 and 30% olive oil by-products supplementation and prolonged after weaning and during suckling period (8 weeks after lambing). The 1st lactating lambs of ewes was supplemented with 15% olive oil by-products, the 2nd lactating lambs of ewes supplemented with 30% olive oil by-products and the 3rd lactating lambs of ewes served as control. The results showed that the performance of both ewes and their lambs during the experimental period was improved. It can be concluded that olive oil by-products can partially replace sugar beet pulp in diets of growing and lactating ruminants

  1. Direct analysis in real time mass spectrometry of potential by-products from homemade nitrate ester explosive synthesis.

    Science.gov (United States)

    Sisco, Edward; Forbes, Thomas P

    2016-04-01

    This work demonstrates the coupling of direct analysis in real time (DART) ionization with time-of-flight mass spectrometry (MS) in an off-axis configuration for the trace detection and analysis of potential partially nitrated and dimerized by-products of homemade nitrate ester explosive synthesis. Five compounds relating to the synthesis of nitroglycerin (NG) and pentaerythritol tetranitrate (PETN) were examined. Deprotonated ions and adducts with molecular oxygen, nitrite, and nitrate were observed in the mass spectral responses of these compounds. A global optimum temperature of 350 °C for the by-products investigated here enabled single nanogram to sub nanogram trace detection. Matrix effects were examined through a series of mixtures containing one or more compounds (sugar alcohol precursors, by-products, and/or explosives) across a range of mass loadings. The explosives MS responses experienced competitive ionization in the presence of all by-products. The magnitude of this influence corresponded to both the degree of by-product nitration and the relative mass loading of the by-product to the explosive. This work provides a characterization of potential by-products from homemade nitrate ester synthesis, including matrix effects and potential challenges that might arise from the trace detection of homemade explosives (HMEs) containing impurities. Detection and understanding of HME impurities and complex mixtures may provide valuable information for the screening and sourcing of homemade nitrate ester explosives. Published by Elsevier B.V.

  2. STONES SAWING SLUDGE AS BY-PRODUCT: characterization for a future recovery

    Science.gov (United States)

    Zichella, Lorena; Bellopede, Rossana; Marini, Paola

    2017-04-01

    The European Commission, as part of its Thematic Strategy on the prevention and recycling of waste, committed itself to tackle one of the issues around the waste definition, namely the distinction between waste and by-products. This definition has been outlined through the Communication on waste and by-product of the European Court of Justice (Brussels, 21.2.2007 COM(2007) 59 final COMMUNICATION FROM THE COMMISSION TO THE COUNCIL AND THE EUROPEAN PARLIAMENT). By-product is a substance or object, resulting from a production process, the primary aim of which is not the production of that item. By-products can come from a wide range of business sectors, and can have very different environmental impacts. If there is a possibility that the material is in fact not useable, because it does not meet the technical specifications that would be required for its use, then it should continue to be considered as a waste. The status of waste protects the environment from the potential consequences of this uncertainty. If it subsequently happens that a use is found for the waste in question then it will lose its status of waste and it will be considered a by-product. An incorrect classification could be the cause of environmental damage or unnecessary costs for business. For this purpose a characterization of sludge coming from different plants of stone processing was carried out for a better classification of the materials in view of a future recovery. The different stones cutting processes considered for this study are: gangsaw, diamond blade and diamond wire. The cut materials are granites, gneisses, and other stones mainly of silicatic nature. The tests performed on the sawing sludge are the following: particle size analysis, chemical analysis, wet magnetic separation, diffraction and SEM analysis. The study performed is useful for evaluating the possible reuses of the products coming from the magnetic separation: the metal fraction, and the mineral one. In order to avoid a

  3. Nutrient and dissolved organic carbon removal from water using mining and metallurgical by-products.

    Science.gov (United States)

    Wendling, Laura A; Douglas, Grant B; Coleman, Shandel; Yuan, Zheng

    2012-05-15

    Excess nutrient input to water bodies frequently results in algal blooms and development of oxygen deficient conditions. Mining or metallurgical by-products can potentially be utilised as filtration media within water treatment systems such as constructed wetlands, permeable reactive barriers, or drain liners. These materials may offer a cost-effective solution for the removal of nutrients and dissolved organic carbon (DOC) from natural waters. This study investigated steel-making, alumina refining (red mud and red sand) and heavy mineral processing by-products, as well as the low-cost mineral-based material calcined magnesia, in laboratory column trials. Influent water and column effluents were analysed for pH and flow rate, alkalinity, nutrient species and DOC, and a range of major cations and anions. In general, by-products with high Ca or Mg, and to a lesser extent those with high Fe content, were well-suited to nutrient and DOC removal from water. Of the individual materials examined, the heavy mineral processing residue neutralised used acid (NUA) exhibited the highest sorption capacity for P, and removed the greatest proportions of all N species and DOC from influent water. In general, NUA and mixtures containing NUA, particularly those with calcined magnesia or red mud/red sand were the most effective in removing nutrients and DOC from influent water. Post-treatment effluents from columns containing NUA and NUA/steel-making by-product, NUA/red sand and NUA/calcined magnesia mixtures exhibited large reductions in DOC, P and N concentrations and exhibited a shift in nutrient ratios away from potential N- and Si-limitation and towards potential P-limitation. If employed as part of a large-scale water treatment scheme, use of these mining and metallurgical by-products for nutrient removal could result in reduced algal biomass and improved water quality. Identification and effective implementation of mining by-products or blends thereof in constructed wetlands

  4. UN-ECE task force: 'by-product utilization from stationary installations'

    International Nuclear Information System (INIS)

    Hackl, A. E.; Zehetner, G.

    1996-09-01

    The task force has concluded as followed: Major sources of by-products considered in this report from stationary installations are large scale firing installations, waste incineration, upgrading processes and utilization in iron and steel, aluminium and copper industry, and the pulp and paper industry. The share of each sector source to the total amount of by-products generated differs significantly in the participating countries. State of the art processes as described in the report take account of the need for integrated pollution prevention and control. In particular the requirements set out in the Convention on Long Range Transboundary Air Pollution can still be satisfied when applying these state of the art processes. The report shows that a number of techniques for avoidance, reduction and/or utilization of by-products are in commercial operation in the branches discussed. They can therefore be considered to be best available. For some special by-products technical processes for the treatment are still in development and are not yet state-of-the-art. The implementation of the already proven techniques varies considerably in the different ECE-countries. This is mainly due to the following circumstances: differences in the design and stringency of legal regulations, availability of landfilling sites, costs of disposal, differences in industrial structure. Problems with by-product utilization originate mainly from: a) from a loss of international competitiveness of the respective industrial sector, if the reduction of the amount of by-products or their utilization leads to higher costs than conventional processes; b) from quality standards for materials which are inadequate for secondary raw materials thus creating acceptance problems of these materials. C) In some cases incineration and/or thermal recycling processes generate PCDD/F. quantities produces may be capable of reduction by means of process modification. If, however PCDD/F is released to the

  5. The future of nuclear power

    International Nuclear Information System (INIS)

    Greenhalgh, G.

    1988-01-01

    The desire for safe and plentiful forms of energy led to the rapid development of the nuclear power industry in the years following the Second World War. Although initially embraced as the answer to the dwindling supply of non-renewable fuel resources, plans to expand nuclear power generation have met with growing public resistance as investigations point to the possible harmful effects of radiation, an unavoidable by-product of the process. This book presents the case for nuclear power in the light of the increasing amount of controversy surrounding the issue. Diverse and often contradicting nuclear policies in different countries are examined with reference to the political, historical and economic factors which account for these wide variations in public sentiment. A detailed analysis is given of the growth of world energy demand, energy vs economic growth and alternative energies, and particular emphasis is given to aspects of the environment, pollution, safety, health hazards and the measurement and control of radiation. The role of public attitudes and awareness also receives special attention: a fuller and less emotional public understanding of nuclear power is necessary to assess the various benefits and risks which accompany this important source of energy

  6. Nuclear rights - nuclear wrongs

    Energy Technology Data Exchange (ETDEWEB)

    Paul, E.F.; Miller, F.D.; Paul, J.; Ahrens, J.

    1986-01-01

    This book contains 11 selections. The titles are: Three Ways to Kill Innocent Bystanders: Some Conundrums Concerning the Morality of War; The International Defense of Liberty; Two Concepts of Deterrence; Nuclear Deterrence and Arms Control; Ethical Issues for the 1980s; The Moral Status of Nuclear Deterrent Threats; Optimal Deterrence; Morality and Paradoxical Deterrence; Immoral Risks: A Deontological Critique of Nuclear Deterrence; No War Without Dictatorship, No Peace Without Democracy: Foreign Policy as Domestic Politics; Marxism-Leninism and its Strategic Implications for the United States; Tocqueveille War.

  7. Nuclear moments

    CERN Document Server

    Kopferman, H; Massey, H S W

    1958-01-01

    Nuclear Moments focuses on the processes, methodologies, reactions, and transformations of molecules and atoms, including magnetic resonance and nuclear moments. The book first offers information on nuclear moments in free atoms and molecules, including theoretical foundations of hyperfine structure, isotope shift, spectra of diatomic molecules, and vector model of molecules. The manuscript then takes a look at nuclear moments in liquids and crystals. Discussions focus on nuclear paramagnetic and magnetic resonance and nuclear quadrupole resonance. The text discusses nuclear moments and nucl

  8. Stillage reflux in food waste ethanol fermentation and its by-product accumulation.

    Science.gov (United States)

    Ma, Hongzhi; Yang, Jian; Jia, Yan; Wang, Qunhui; Tashiro, Yukihiro; Sonomoto, Kenji

    2016-06-01

    Raw materials and pollution control are key issues for the ethanol fermentation industry. To address these concerns, food waste was selected as fermentation substrate, and stillage reflux was carried out in this study. Reflux was used seven times during fermentation. Corresponding ethanol and reducing sugar were detected. Accumulation of by-products, such as organic acid, sodium chloride, and glycerol, was investigated. Lactic acid was observed to accumulate up to 120g/L, and sodium chloride reached 0.14mol/L. Other by-products did not accumulate. The first five cycles of reflux increased ethanol concentration, which prolonged fermentation time. Further increases in reflux time negatively influenced ethanol fermentation. Single-factor analysis with lactic acid and sodium chloride demonstrated that both factors affected ethanol fermentation, but lactic acid induced more effects. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Cell wall content and rumen dry matter disappearance of γ-irradiated wood by-products

    International Nuclear Information System (INIS)

    Flachowsky, G.; Baer, M.; Zuber, S.; Tiroke, K.

    1990-01-01

    Spruce sawdust and barks of spruce, pine and larch were irradiated with various doses of γ-rays (0; 0.1; 0.25; 0.5; 1.0 and 2.0 MGy). Cell wall constituents and rumen dry-matter disappearance (incubation time: 48 h) were determined. γ-Irradiation significantly reduced neutral detergent fibre and acid detergent fibre content of all by-products. The crude lignin of the wood by-products was not significantly influenced by γ-irradiation. Rumen dry-matter loss of untreated sawdust was 5.6%, that of barks between 18.2 (pine) and 64.6% (spruce). γ-Irradiation significantly increased rumen dry-matter loss. Increased washout due to solubilization and particle breakdown was mainly responsible for the higher dry-matter losses in the rumen after irradiation. The results do not justify practical use because of the high dose of irradiation required. (author)

  10. Utilization of oleo-chemical industry by-products for biosurfactant production

    Science.gov (United States)

    2013-01-01

    Biosurfactants are the surface active compounds produced by micro-organisms. The eco-friendly and biodegradable nature of biosurfactants makes their usage more advantageous over chemical surfactants. Biosurfactants encompass the properties of dropping surface tension, stabilizing emulsions, promoting foaming and are usually non- toxic and biodegradable. Biosurfactants offer advantages over their synthetic counterparts in many applications ranging from environmental, food, and biomedical, cosmetic and pharmaceutical industries. The important environmental applications of biosurfactants include bioremediation and dispersion of oil spills, enhanced oil recovery and transfer of crude oil. The emphasis of present review shall be with reference to the commercial production, current developments and future perspectives of a variety of approaches of biosurfactant production from the micro-organisms isolated from various oil- contaminated sites and from the by-products of oleo-chemical industry wastes/ by-products viz. used edible oil, industrial residues, acid oil, deodorizer distillate, soap-stock etc. PMID:24262384

  11. Exploitation of starch industry liquid by-product to produce bioactive peptides from rice hydrolyzed proteins.

    Science.gov (United States)

    Dei Piu', Lucilla; Tassoni, Annalisa; Serrazanetti, Diana Isabella; Ferri, Maura; Babini, Elena; Tagliazucchi, Davide; Gianotti, Andrea

    2014-07-15

    Small peptides show higher antioxidant capacity than native proteins and may be absorbed in the intestine without further digestion. In our study, a protein by-product from rice starch industry was hydrolyzed with commercial proteolytic enzymes (Alcalase, Neutrase, Flavourzyme) and microbial whole cells of Bacillus spp. and the released peptides were tested for antioxidant activity. Among enzymes, Alcalase was the most performing, while microbial proteolytic activity was less efficient. Conversely, the antioxidant activity was higher in the samples obtained by microbial hydrolysis and particularly with Bacillus pumilus AG1. The sequences of low molecular weight antioxidant peptides were determined and analyzed for aminoacidic composition. The results obtained so far suggest that the hydrolytic treatment of this industrial by-product, with selected enzymes and microbial systems, can allow its exploitation for the production of functional additives and supplements rich in antioxidant peptides, to be used in new food formulas for human consumption. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Effects of ultrasonic treatment on zeolite NaA synthesized from by-product silica.

    Science.gov (United States)

    Vaičiukynienė, Danutė; Kantautas, Aras; Vaitkevičius, Vitoldas; Jakevičius, Leonas; Rudžionis, Žymantas; Paškevičius, Mantas

    2015-11-01

    The synthesis of zeolite NaA from silica by-product was carried out in the presence of 20 kHz ultrasound at room temperature. Zeolites obtained in this type of synthesis were compared to zeolites obtained by performing conventional static syntheses under similar conditions. The sonication effects on zeolite NaA synthesis were characterized by phase identification, crystallinity etc. The effects of different parameters such as crystallization time and initial materials preparation methods on the crystallinity and morphology of the synthesized zeolites were investigated. The final products were characterized by XRD and FT-IR. It was possible to obtain crystalline zeolite NaA from by-product silica in the presence of ultrasound. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Castanea sativa by-products: a review on added value and sustainable application.

    Science.gov (United States)

    Braga, Nair; Rodrigues, Francisca; Oliveira, M Beatriz P P

    2015-01-01

    Castanea sativa Mill. is a species of the family Fagaceae abundant in south Europe and Asia. The fruits (chestnut) are an added value resource in producing countries. Chestnut economic value is increasing not only for nutritional qualities but also for the beneficial health effects related with its consumption. During chestnut processing, a large amount of waste material is generated namely inner shell, outer shell and leaves. Studies on chestnut by-products revealed a good profile of bioactive compounds with antioxidant, anticarcinogenic and cardioprotective properties. These agro-industrial wastes, after valorisation, can be used by other industries, such as pharmaceutical, food or cosmetics, generating more profits, reducing pollution costs and improving social, economic and environmental sustainability. The purpose of this review is to provide knowledge about the type of chestnut by-products produced, the studies concerning its chemical composition and biological activity, and also to discuss other possible applications of these materials.

  14. Collection and application of by-product formed in e-b flue gas treatment process

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Tyminski, B.; Zakrzewska-Trznadel, G.; Tokunaga, O.; Machi, S.

    1998-01-01

    In the e-b process SO 2 and NO x are converted into ammonium sulphate and ammonium nitrate, which condenses from gas phase in the form of submicrone particles. These salts are a valuable fertilizer and should be removed from cleaned gas. Bag filter, ESP and wet gravel bed filter were applied for collecting of salt particles in pilot plant facilities. Up to now ESP is considered to be the best filtration method of aerosols formed after irradiation of flue gas. Collected salts after granulation may be used as a fertilizer enriching soil in nitrogen and sulphur or as a component of mixed fertilizer. Analysis of by-products from different e-b pilot plants confirms that it does not contain any harmful substances like heavy metals and fulfill all standards for commercial fertilizers. Also field experiments show that the by-products have the same properties as a commercial fertilizer

  15. Lignin-rich biomass of cotton by-products for biorefineries via pyrolysis.

    Science.gov (United States)

    Chen, Jiao; Liang, Jiajin; Wu, Shubin

    2016-10-01

    Pyrolysis was demonstrated to investigate the thermal decomposition characteristics and potential of lignin-rich cotton by-products cotton exocarp (CE) and spent mushroom substrate consisted of cotton by-products (MSC) for biorefineries. The chemical component and structure alteration of CE and MSC was found to affect their thermochemical behaviors. The bio-oil yield from CE was 58.13wt% while the maximum yield from MSC was 45.01% at 600°C. The phenolic compounds obtained from CE and MSC were 33.9% and 39.2%, respectively. The yield of acetic acid from MSC between 400 and 600°C was about 30-38% lower than that from CE, which suggests the high quality of bio-oil was obtained. Biochar from MSC via slow pyrolysis had a high mass yield (44.38wt%) with well-developed pore structure. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Biological activities of Agave by-products and their possible applications in food and pharmaceuticals.

    Science.gov (United States)

    López-Romero, Julio Cesar; Ayala-Zavala, Jesús Fernando; González-Aguilar, Gustavo Adolfo; Peña-Ramos, Etna Aida; González-Ríos, Humberto

    2018-05-01

    Agave leaves are considered a by-product of alcoholic beverage production (tequila, mezcal and bacanora) because they are discarded during the production process, despite accounting for approximately 50% of the total plant weight. These by-products constitute a potential source of Agave extracts rich in bioactive compounds, such as saponins, phenolic compounds and terpenes, and possess different biological effects, as demonstrated by in vitro and in vivo tests (e.g. antimicrobial, antifungal, antioxidant, anti-inflammatory, antihypertensive, immunomodulatory, antiparasitic and anticancer activity). Despite their positive results in biological assays, Agave extracts have not been widely evaluated in food systems and pharmaceutical areas, and these fields represent a potential route to improve the usage of Agave plants as food additives and agents for treating medical diseases. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Expanding the Role of Systems Modeling: Considering Byproduct Generation from Biofuel Production

    Directory of Open Access Journals (Sweden)

    Kurt A. Rosentrater

    2006-06-01

    Full Text Available The bioethanol industry has been experiencing rapid growth over the past several years, and is expected to continue to increase production for the foreseeable future. A vital component to the success of this industry is the sales and marketing of processing residues, which are primarily sold as dried distillers grains with solubles (DDGS. Systems modeling, a technique that has been used to predict future demand for bioethanol, can also be used to determine potential byproduct generation rates. This paper discusses the development of one such model, and presents predicted generation of DDGS as well as carbon dioxide emissions from this industry through 2100. These simulation results underscore the growing need to actively pursue research focused on value-added alternatives for the use of bioethanol byproduct streams.

  18. Multielemental analysis of agroindustrial by-products employed in animal feeding by INAA

    International Nuclear Information System (INIS)

    Teruya, C.M.; Armelin, M.J.A.; Saiki, M.

    2000-01-01

    Instrumental neutron activation analysis (INAA) with gamma-ray spectrometry was applied to determine As, Ca, Cd, Cl, Co, Cu, Cr, Fe, Hg, K, Mg, Mn, Mo, Na, Sb, Se and Zn in the Brazilian agroindustrial by-products. These materials are widely used in ruminant feeding. The results obtained were compared with requirement and maximum tolerable concentrations. The general conclusions from the data obtained were: (1) many by-products presented concentrations of some essential elements lower than the requirement concentrations, while in some samples the concentrations of Cr, Fe, Mg and Se exceeded by a little the maximum tolerable concentrations, (2) the elements As, Cd, Hg and Sb, generally considered toxic, showed concentrations lower than maximum tolerable values. (author)

  19. Enzymatic Biodiesel Synthesis Using a Byproduct Obtained from Palm Oil Refining

    Directory of Open Access Journals (Sweden)

    Igor Nascentes dos Santos Corrêa

    2011-01-01

    Full Text Available An alternative route to produce biodiesel is based on esterification of free fatty acids present in byproducts obtained from vegetable oil refining, such as palm oil fatty acid distillate (PFAD. PFAD is a byproduct of the production of edible palm oil, which contains 96 wt.% of free fatty acids. The purpose of this work was to study biodiesel synthesis via esterification of PFAD with methanol and ethanol, catalyzed by commercial immobilized lipases (Novozym 435, Lipozyme RM-IM, and Lipozyme TL-IM, in a solvent-free system. The effects of reaction parameters such as type of lipase, enzyme amount, type of alcohol, alcohol amount, and enzyme reuse were studied. Fatty acid conversion of 93% was obtained after 2.5 h of esterification reaction between PFAD and ethanol using 1.0 wt.% of Novozym 435 at 60°C.

  20. Amelioration of alkali soil using flue gas desulfurization byproducts: productivity and environmental quality

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.J.; Chen, C.H.; Xu, X.C.; Li, Y.J. [Tsing Hua University, Beijing (China). Ministry of Education

    2008-01-15

    In this study, flue gas desulfurization (FGD) byproducts are used to ameliorate alkali soil. The average application rates for soils with low exchangeable sodium percentage (ESP), mid ESP, and high ESP are 20.9, 30.6, and 59.3 Mg ha{sup -1} respectively. The experimental results obtained for 3 consecutive years reveal that the emergence ratios and yields of the crops were 1.1-7.6 times and 1.1-13.9 times those of the untreated control, respectively. The concentrations of Cr, Pb, Cd, As, and Hg in the treated soils are far below the background values stipulated by the Environmental Quality Standard for Soils (GB 15618-1995). Their concentrations in the seeds of corn and alfalfa grown in the treated soils are far below the tolerance limits regulated by National Food Standards of China. The results of this research demonstrate that the amelioration of alkali soils using FGD byproducts is promising.

  1. The Use of Seashell by-Products in Pervious Concrete Pavers

    OpenAIRE

    Dang Hanh Nguyen; Nassim Sebaibi; Mohamed Boutouil; Lydia Leleyter; Fabienne Baraud

    2013-01-01

    Pervious concrete is a green alternative to conventional pavements with minimal fine aggregate and a high void content. Pervious concrete allows water to infiltrate through the pavement, thereby reducing the runoff and the requirement for stormwater management systems. Seashell By-Products (SBP) are produced in an important quantity in France and are considered as waste. This work investigated to use SBP in pervious concrete and produce an even more environmentally friendly product, Pervi...

  2. Digital by-product data in web 2.0 exploring mass collaboration of Wikipedia

    CERN Document Server

    He, Zeyi

    2012-01-01

    Thanks to Information and Communication Technologies (ICTs), every action on the Internet nowadays is recorded by digital by-product data: online purchases, tagging friends' photos, browsing webpages, etc. This unprecedented technological revolution has empowered us with unique abilities to understand not only people's behaviours, but also online platforms. Business corporates and academic researchers alike have both embarked on actively mining such information to stay ahead of the game in th...

  3. L-Serine overproduction with minimization of by-product synthesis by engineered Corynebacterium glutamicum.

    Science.gov (United States)

    Zhu, Qinjian; Zhang, Xiaomei; Luo, Yuchang; Guo, Wen; Xu, Guoqiang; Shi, Jinsong; Xu, Zhenghong

    2015-02-01

    The direct fermentative production of L-serine by Corynebacterium glutamicum from sugars is attractive. However, superfluous by-product accumulation and low L-serine productivity limit its industrial production on large scale. This study aimed to investigate metabolic and bioprocess engineering strategies towards eliminating by-products as well as increasing L-serine productivity. Deletion of alaT and avtA encoding the transaminases and introduction of an attenuated mutant of acetohydroxyacid synthase (AHAS) increased both L-serine production level (26.23 g/L) and its productivity (0.27 g/L/h). Compared to the parent strain, the by-products L-alanine and L-valine accumulation in the resulting strain were reduced by 87 % (from 9.80 to 1.23 g/L) and 60 % (from 6.54 to 2.63 g/L), respectively. The modification decreased the metabolic flow towards the branched-chain amino acids (BCAAs) and induced to shift it towards L-serine production. Meanwhile, it was found that corn steep liquor (CSL) could stimulate cell growth and increase sucrose consumption rate as well as L-serine productivity. With addition of 2 g/L CSL, the resulting strain showed a significant improvement in the sucrose consumption rate (72 %) and the L-serine productivity (67 %). In fed-batch fermentation, 42.62 g/L of L-serine accumulation was achieved with a productivity of 0.44 g/L/h and yield of 0.21 g/g sucrose, which was the highest production of L-serine from sugars to date. The results demonstrated that combined metabolic and bioprocess engineering strategies could minimize by-product accumulation and improve L-serine productivity.

  4. CHO On A Detox: Removing By-Product Formation Through Cell Engineering

    DEFF Research Database (Denmark)

    Pereira, Sara; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

    Chinese Hamster Ovary (CHO) cells are the preferred hosts for the production of therapeutic glycoproteins. However, there is a need for improvement of the bioprocesses towards increased cell growth and higher productivities without compromising the product quality. Efforts to obtain tailor-made p......-made products with the desired properties that meet the requirements of regulatory authorities are continuously being made. Of equal relevance is to develop methods to engineer cell lines with improved by-product metabolism....

  5. Gamma and electron radiation effects on agricultural by-products with high fibre content

    International Nuclear Information System (INIS)

    Leonhardt, J.W.; Baer, M.; Nehring, K.

    1983-01-01

    Gamma and electron radiation effects on wheat straw, oat straw, barley straw, rye straw and dried green fodder are reported. In vitro and in vivo studies show that the digestibility of these agricultural by-products with high fibre content can be increased up to 80% and more at high doses. The increase of the digestibility is connected with a depolymerization of the cellulose and hemicellulose. (author)

  6. Quality Parameters Of Wheat Bread Enriched With Pumpkin (Cucurbita Moschata) By-Products

    OpenAIRE

    Kampuse Solvita; Ozola Liene; Straumite Evita; Galoburda Ruta

    2015-01-01

    Pumpkin processing into puree, juice, candied fruit and pumpkin seed oil results in large amount of by-products. Pumpkins are rich in carotenes, vitamins, minerals, pectin and dietary fibre. The aim of the current study was to evaluate effect of pumpkin pomace and pumpkin residue powder on wheat bread quality. The total content of carotenes was analyzed by spectrophotometric method. The initial increase of pumpkin residue addition indicated increase in loaf volume, which started to decrease a...

  7. Valorisation of fish by-products against waste management treatments--Comparison of environmental impacts.

    Science.gov (United States)

    Lopes, Carla; Antelo, Luis T; Franco-Uría, Amaya; Alonso, Antonio A; Pérez-Martín, Ricardo

    2015-12-01

    Reuse and valorisation of fish by-products is a key process for marine resources conservation. Usually, fishmeal and oil processing factories collect the by-products generated by fishing port and industry processing activities, producing an economical benefit to both parts. In the same way, different added-value products can be recovered by the valorisation industries whereas fishing companies save the costs associated with the management of those wastes. However, it is important to estimate the advantages of valorisation processes not only in terms of economic income, but also considering the environmental impacts. This would help to know if the valorisation of a residue provokes higher impact than other waste management options, which means that its advantages are probably not enough for guarantying a sustainable waste reuse. To that purpose, there are several methodologies to evaluate the environmental impacts of processes, including those of waste management, providing different indicators which give information on relevant environmental aspects. In the current study, a comparative environmental assessment between a valorisation process (fishmeal and oil production) and different waste management scenarios (composting, incineration and landfilling) was developed. This comparison is a necessary step for the development and industrial implementation of these processes as the best alternative treatment for fish by-products. The obtained results showed that both valorisation process and waste management treatments presented similar impacts. However, a significant benefit can be achieved through valorisation of fish by-products. Additionally, the implications of the possible presence of pollutants were discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Utilization of agro-based industrial by-products for biogas production in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Ngoc, U.N.; Schnitzer, H. [Graz Univ. of Technology, (Austria). Inst. for Resource Efficient and Sustainable Systems; Berghold, H. [Joanneum Research Inst. for Sustainable Techniques and Systems (Austria)

    2007-07-01

    Due to the rapid rates of urbanization occurring in many countries in the world, the importance of an efficient and effective solid waste management system and the utilization/reuse of waste are more critical than ever before, especially for agricultural residues and agro-based industrial by-products. Over the past decade, the amount of solid waste generated in Vietnam has been increasing steadily. Numbers are predicted to continue to increase as well. There is significant potential to use the large amount of wastes for biogas conversion processes and for further production of commercial energy. This paper presented starts with estimation and analysis of the amounts of organic waste, agricultural residues, and agro-based industrial by-products generated from food industrial processes using general data sources for Vietnam. A laboratory study examined the use of agro-based industrial by-products and agricultural residues from cassava, sweet potato, pineapple residues, organic wastes, manures as input materials for biogas production in the anaerobic process. This paper provided an overview of Vietnam as a country, as well as a general overview of the amount of organic waste generated in the country. It also discussed the fermentation tests that were conducted to find out the potential of biogas production from some residues. It was concluded that a significant portion of waste could be reused as an environmentally sound source of energy. The utilization of agricultural residues and industrial byproducts as input materials for biogas production will not only reduce the quantity of organic waste thrown into landfills, but also reduce the negative impact on the environment. 10 refs., 7 tabs., 7 figs.

  9. Sensory and aromatic characteristics of tongue sole by-products hydrolysates (Cynoglossus senegalensis)

    OpenAIRE

    Sylla, K. S. B.; Berge, Jean-pascal; Prost, Carole; Musabyemariya, B.; Seydi, Mg

    2009-01-01

    Tongue sole by-products coming from fish-filleting plant were hydrolyzed by Protamex® protease. To identify the future application of hydrolysates, a sensory analysis was carried out.The sensory profile was performed with a jury of 14 specialized judges.11 profiles were found by this panel of tasting. In addition, the aromatic characterization revealed that 57 molecules are responsible for these odours described in sensory analysis.The description of these aromatic compounds opens potentia...

  10. Optimization of the liquid biofertilizer production in batch fermentation with by-product from MSG

    Science.gov (United States)

    Namfon, Panjanapongchai; Ratchanok, Sahaworarak; Chalida, Daengbussade

    2017-03-01

    The long term use of chemical fertilizers destroyed the friability of soil which obviously decreased quantity and quality of crops and especially affect microorganisms living in soils. The bio-fertilizer with microbial consortium is an environmental friendly alternative to solve this bottleneck due to harboring soil microorganisms such as Bacillus sp., Micrococcus sp., Pseudomonas sp., Staphylococcus sp. and Deinococcus sp. produced with natural by-product or waste from industries that is alternative and sustainable such as nutrient-rich (by-product) from Mono Sodium Glutamate (MSG) for producing liquid biofertilizer by batch fermentation. In this work, the concentration of reducing sugar from substrate as main carbon source was evaluated in shake flask with mixed cultures. The optimal conditions were studied comparing with two levels of reducing sugar concentration (10, 20 g/L) and inoculums concentration (10, 20 %v/v) with using (2×2) full factorial design. The results indicated that the by-product from monosodium glutamate is feasible for fermentation and inoculums concentration is mainly influenced the batch fermentation process. Moreover, the combined 20 g/L and 10%v/v were considerably concluded as an optimal condition, of which the concentration of vegetative cells and spores attained at 8.29×109 CFU/mL and 1.97×105 CFU/mL, respectively. Their spores cell yields from reducing sugar (Yx/s) were obtained at 1.22×106 and 3.34×105 CFU/g were markedly different. In conclusion, the liquid Biofertilizer was produced satisfactorily at 20 g/L reducing sugar and 10% v/v inoculums in shake flask culture. Moreover, these results suggested that the by-product from monosodium glutamate is feasible for low-cost substrate in economical scale and environmental-friendly.

  11. By-Product Carrying Humidified Hydrogen: An Underestimated Issue in the Hydrolysis of Sodium Borohydride.

    Science.gov (United States)

    Petit, Eddy; Miele, Philippe; Demirci, Umit B

    2016-07-21

    Catalyzed hydrolysis of sodium borohydride generates up to four molecules of hydrogen, but contrary to what has been reported so far, the humidified evolved gas is not pure hydrogen. Elemental and spectroscopic analyses show, for the first time, that borate by-products pollute the stream as well as the vessel. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Antimicrobial potential of cauliflower, broccoli, and okara byproducts against foodborne bacteria.

    Science.gov (United States)

    Sanz-Puig, Maria; Pina-Pérez, Maria C; Criado, Maria Nieves; Rodrigo, Dolores; Martínez-López, Antonio

    2015-01-01

    The antimicrobial potential of cauliflower, broccoli, and okara byproducts was assessed against Gram-positive and Gram-negative bacteria. Salmonella enterica serovar Typhimurium, Escherichia coli O157:H7, Bacillus cereus, and Listeria monocytogenes serovar 4b growth behavior was assessed under exposure to 5% vegetable byproducts added to the reference medium, buffered peptone water (0.1% [wt/vol]), at 37°C. Although the byproducts were not effective against L. monocytogenes, they were bactericidal against Salmonella Typhimurium, E. coli O157:H7, and B. cereus. The most promising results were achieved with the cauliflower-Salmonella Typhimurium combination, because the bacterial population was reduced by 3.11 log10 cycles after 10 h of incubation at 37°C as a result of 5% cauliflower addition. Further studies were carried out for this combination, at different cauliflower concentrations (0, 0.5, 1, 5, 10, and 15%) and at temperatures in the range of 5-37°C. The greatest inactivation level (6.11 log10 cycles) was achieved at refrigeration temperature (5°C) using 15% cauliflower addition. Both temperature and cauliflower concentration significantly (p≤0.05) influenced the Salmonella Typhimurium inactivation level. The kinetic parameters were adjusted to mathematical models. The modified Gompertz mathematical model provided an accurate fit (root-mean-square error (RMSE) [0.00009-0.21] and adjusted-R(2) [0.81-0.99]) to experimental Salmonella Typhimurium survival curves describing inactivation kinetics of the pathogen to the antimicrobial effect of cauliflower byproduct.

  13. Protein bread fortification with cumin and caraway seeds and by-product flour

    OpenAIRE

    Sayed Ahmad, Bouchra; Talou, Thierry; Straumite, Evita; Sabovics, Martins; Kruma, Zanda; Saad, Zeinab; Hijazi, Akram

    2018-01-01

    Malnutrition continues to be a key health problem in developing regions. The valorization of food waste appears as an ideal way to prevent malnutrition and improve people’s access to food. Cumin (Cuminum cyminum L.) and caraway (Carum carvi L.) oilseeds are commonly used for cuisine and medicinal purposes. However, remaining cakes after oil extraction are usually underutilized. In order to assess the usefulness of these by-products in food applications, this study investigated the effect of t...

  14. Mechanical behavior of sustainable building materials using PET waste and industrial by-products

    OpenAIRE

    Juárez, C. A; Mendoza-Rangel, J. M; González, J. R; Rodríguez, J. A; Valdez, P

    2015-01-01

    The building industry is facing the challenge of satisfying a growing demand for housing spaces that can be mitigated by the use of construction materials manufactured with industrial by-products that allow the production of low-cost housing with a low environmental impact. In this research, an alternative building system to manufacture lightweight masonry blocks with polyethylene terephthalate (PET) bottles and fiber-reinforced panels using binary mixture (Portland cement and fly ash), was s...

  15. A Review of Antioxidant Peptides Derived from Meat Muscle and By-Products

    Directory of Open Access Journals (Sweden)

    Rui Liu

    2016-09-01

    Full Text Available Antioxidant peptides are gradually being accepted as food ingredients, supplemented in functional food and nutraceuticals, to positively regulate oxidative stress in the human body against lipid and protein oxidation. Meat muscle and meat by-products are rich sources of proteins and can be regarded as good materials for the production of bioactive peptides by use of enzymatic hydrolysis or direct solvent extraction. In recent years, there has been a growing number of studies conducted to characterize antioxidant peptides or hydrolysates derived from meat muscle and by-products as well as processed meat products, including dry-cured hams. Antioxidant peptides obtained from animal sources could exert not only nutritional value but also bioavailability to benefit human health. This paper reviews the antioxidant peptides or protein hydrolysates identified in muscle protein and by-products. We focus on the procedure for the generation of peptides with antioxidant capacity including the acquisition of crude peptides, the assessment of antioxidant activity, and the purification and identification of the active fraction. It remains critical to perform validation experiments with a cell model, animal model or clinical trial to eliminate safety concerns before final application in the food system. In addition, some of the common characteristics on structure-activity relationship are also reviewed based on the identified antioxidant peptides.

  16. Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: Sustainability and risks

    Energy Technology Data Exchange (ETDEWEB)

    Perez-de-Mora, Alfredo, E-mail: perezdemora@gmail.com [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain); Madejon, Paula; Burgos, Pilar; Cabrera, Francisco [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain); Lepp, Nicholas W. [35, Victoria Road, Formby, Liverpool L37 7DH (United Kingdom); Madejon, Engracia [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain)

    2011-10-15

    We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil. - Highlights: > By-products enhance vegetation dynamics in contaminated semiarid soils. > Depending on the situation single or repeated incorporations may be required. > The structure of the plant community established is not amendment-dependent. > Phytostabilization reduces overall loss of trace elements in semiarid soils. - Phytostabilization using by-products as amendments is a suitable approach for long-term immobilization of various trace elements in semiarid contaminated soils.

  17. Quality Parameters Of Wheat Bread Enriched With Pumpkin (Cucurbita Moschata By-Products

    Directory of Open Access Journals (Sweden)

    Kampuse Solvita

    2015-12-01

    Full Text Available Pumpkin processing into puree, juice, candied fruit and pumpkin seed oil results in large amount of by-products. Pumpkins are rich in carotenes, vitamins, minerals, pectin and dietary fibre. The aim of the current study was to evaluate effect of pumpkin pomace and pumpkin residue powder on wheat bread quality. The total content of carotenes was analyzed by spectrophotometric method. The initial increase of pumpkin residue addition indicated increase in loaf volume, which started to decrease at higher amounts. Sensory evaluation (appearance; surface, crust; porosity; texture, crumb; taste, and flavour of wheat bread with pumpkin revealed very high consumer acceptance except sample with 50% pomace addition. Total carotene content and colour b* value in wheat bread increased by adding pumpkin by-products. It is recommended to add 5% and 10% of pumpkin powder and no more than 30% of pumpkin pomace (calculated per 100 kg of flour to dough for production of wheat bread with pumpkin by-product additions.

  18. Technical viability of self-compacting concretes with by-products from crushed coarse aggregate production

    Directory of Open Access Journals (Sweden)

    Edgar Bacarji

    Full Text Available Abstract The main objective of this work is to present the technical viability of Self Compacting Concretes (SCC containing by-products from crushed coarse aggregate production. For this purpose, a vast characterization of these by-products was made; six mixtures of SCC were produced using two different aggregates: granite and mica schist. The binder/dry aggregate (b/agg ratio by mass was 1:3. The following properties were analyzed: compressive strength, direct tensile strength, flexural tensile strength and splitting tensile strength. Granite presented the best mechanical performance. The replacement of natural sand by granite sand generated concretes with the same level of compressive strength and caused an increase in tensile strength values. The incorporation of silica fume into concrete with granite produced an increase of 17% in compressive strength. So, the use of these by-product materials can provide a technically feasible solution that is also consistent with the aims of sustainable development and preservation of the environment.

  19. Bioassay-guided fractionation of a hepatoprotective and antioxidant extract of pea by-product.

    Science.gov (United States)

    Seida, Ahmed A; El Tanbouly, Nebal D; Islam, Wafaa T; Eid, Hanaa H; El Maraghy, Shohda A; El Senousy, Amira S

    2015-01-01

    The hepatoprotective and antioxidant activities of the hydroalcoholic extract (PE) of pea (Pisum sativum L.) by-product were evaluated, using CCl4-induced oxidative stress and hepatic damage in rats. These activities were assessed via measuring alanine aminotransferase (ALT), aspartate aminotransferase (AST), total protein and albumin, malondialdehyde (MDA), reduced glutathione (GSH), protein thiols (PSH), nitrite/nitrate levels, glutathione-peroxidase (GSH-Px), glutathione-S-transferase (GST) activities, as well as, histopathological evaluation. PE revealed significant hepatoprotective and antioxidant activities mostly found in n-butanol fraction. Chromatographic fractionation of this active fraction led to the isolation of five flavonoid glycosides namely, quercetin-3-O-sophorotrioside (1), quercetin-3-O-rutinoside (2), quercetin-3-O-(6″″-O-E sinapoyl)-sophorotrioside (3), quercetin-3-O-(6″″-O-E feruloyl)-sophorotrioside (4) and quercetin-3-O-β-D-glucopyranoside (5). The isolated compounds were quantified in PE, using a validated HPLC method and the nutritional composition of pea by-product was also investigated. Our results suggest that pea by-product contained biologically active constituents which can be utilised to obtain high value added products for nutraceutical use.

  20. Optimal pH in chlorinated swimming pools - balancing formation of by-products

    DEFF Research Database (Denmark)

    Hansen, Kamilla Marie Speht; Albrechtsen, Hans-Jørgen; Andersen, Henrik Rasmus

    2013-01-01

    In order to identify the optimal pH range for chlorinated swimming pools the formation of trihalomethanes, haloacetonitriles and trichloramine was investigated in the pH-range 6.5–7.5 in batch experiments. An artificial body fluid analogue was used to simulate bather load as the precursor for by-products....... The chlorine-to-precursor ratio used in the batch experiments influenced the amounts of by-products formed, but regardless of the ratio the same trends in the effect of pH were observed. Trihalomethane formation was reduced by decreasing pH but haloacetonitrile and trichloramine formation increased....... To evaluate the significance of the increase and decrease of the investigated organic by-products at the different pH values, the genotoxicity was calculated based on literature values. The calculated genotoxicity was approximately at the same level in the pH range 6.8–7.5 and increased when pH was 6...

  1. Protein Bread Fortification with Cumin and Caraway Seeds and By-Product Flour.

    Science.gov (United States)

    Sayed Ahmad, Bouchra; Talou, Thierry; Straumite, Evita; Sabovics, Martins; Kruma, Zanda; Saad, Zeinab; Hijazi, Akram; Merah, Othmane

    2018-02-25

    Malnutrition continues to be a key health problem in developing regions. The valorization of food waste appears as an ideal way to prevent malnutrition and improve people's access to food. Cumin ( Cuminum cyminum L.) and caraway ( Carum carvi L.) oilseeds are commonly used for cuisine and medicinal purposes. However, remaining cakes after oil extraction are usually underutilized. In order to assess the usefulness of these by-products in food applications, this study investigated the effect of their addition to protein bread formulations. Different levels (2, 4 and 6%) of whole seeds and cakes flour were used in the study. Fortified protein bread samples were compared to control protein bread and evaluated for their sensory, color, moisture, hardness properties, nutritional values as well as their biological activity. Results indicated that bread fortification shows a significant effect on bread properties depending on fortification level. A higher acceptability was observed specially for bread fortified with by-products flour. Increased tendencies of color darkness, moisture content, bread hardness, nutritional values as well as total phenolic content and radical scavenging activity compared to control bread were observed as the percentage of fortification increased in both cases. The overall results showed that the addition of cumin and caraway seeds and by-product flour can improve the antioxidant potential and overall quality of protein bread.

  2. Determination of aflatoxins in by-products of industrial processing of cocoa beans.

    Science.gov (United States)

    Copetti, Marina V; Iamanaka, Beatriz T; Pereira, José Luiz; Lemes, Daniel P; Nakano, Felipe; Taniwaki, Marta H

    2012-01-01

    This study has examined the occurrence of aflatoxins in 168 samples of different fractions obtained during the processing of cocoa in manufacturing plants (shell, nibs, mass, butter, cake and powder) using an optimised methodology for cocoa by-products. The method validation was based on selectivity, linearity, limit of detection and recovery. The method was shown to be adequate for use in quantifying the contamination of cocoa by aflatoxins B(1), B(2), G(1) and G(2). Furthermore, the method was easier to use than other methods available in the literature. For aflatoxin extraction from cocoa samples, a methanol-water solution was used, and then immunoaffinity columns were employed for clean-up before the determination by high-performance liquid chromatography. A survey demonstrated a widespread occurrence of aflatoxins in cocoa by-products, although in general the levels of aflatoxins present in the fractions from industrial processing of cocoa were low. A maximum aflatoxin contamination of 13.3 ng g(-1) was found in a nib sample. The lowest contamination levels were found in cocoa butter. Continued monitoring of aflatoxins in cocoa by-products is nevertheless necessary because these toxins have a high toxicity to humans and cocoa is widely consumed by children through cocoa-containing products, like candies.

  3. Management of dry flue gas desulfurization by-products in underground mines

    Energy Technology Data Exchange (ETDEWEB)

    Sevim, H.

    1997-06-01

    Disposal of coal combustion by-products (CCBs) in an environmentally sound manner is a major issue facing the coal and utility industries in the US today. Disposal into abandoned sections of underground coal mines may overcome many of the surface disposal problems along with added benefits such as mitigation of subsidence and acid mine drainage. However, many of the abandoned underground coal mines are located far from power plants, requiring long distance hauling of by-products which will significantly contribute to the cost of disposal. For underground disposal to be economically competitive, the transportation and handling cost must be minimized. This requires careful selection of the system and optimal design for efficient operation. The materials handling and system economics research addresses these issues. Transportation and handling technologies for CCBs were investigated from technical, environmental and economic points of view. Five technologies were found promising: (1) Pneumatic Trucks, (2) Pressure Differential Rail Cars, (3) Collapsible Intermodal Containers, (4) Cylindrical Intermodal Tanks, and (5) Coal Hopper Cars with Automatic Retractable Tarping. The first two technologies are currently being utilized in transporting by-products from power plants to disposal sites, whereas the next three are either in development or in conceptualization phases. In this research project, engineering design and cost models were developed for the first four technologies. The engineering design models are in the form of spreadsheets and serve the purpose of determining efficient operating schedules and sizing of system components.

  4. Utilisation of metallurgical by-products in road construction in the Czech Republic

    Science.gov (United States)

    Kresta, František

    2017-09-01

    Metallurgical by-products, primarily blast furnace slag and steel slag, have ranked among important alternative sources of fill as well as of material for the structural layers in highways. Main hazards of metallurgical by-products are closely connected to their chemical and mineralogical composition and they can be resulted in volume changes. Fears from possible deformations similar to the D47 motorway meant that metallurgical by-products were excluded from several public tenders of road construction. Comparison of blast furnace slag, steel slag and other metallurgical by products parameters allow us to define the most hazardous material as steelworks waste. Linear swelling of steelwork waste achieves more than 40% at 75°C and swelling pressure was higher than 1.5 MPa. Compositional heterogeneity of steelworks waste makes it difficult to establish the long-term behaviour of this material. At the present time we cannot ascertain which maximum values can be reached by deformation and what are the swelling pressures acting on the material while the volume changes are in progress.

  5. Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: Sustainability and risks

    International Nuclear Information System (INIS)

    Perez-de-Mora, Alfredo; Madejon, Paula; Burgos, Pilar; Cabrera, Francisco; Lepp, Nicholas W.; Madejon, Engracia

    2011-01-01

    We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil. - Highlights: → By-products enhance vegetation dynamics in contaminated semiarid soils. → Depending on the situation single or repeated incorporations may be required. → The structure of the plant community established is not amendment-dependent. → Phytostabilization reduces overall loss of trace elements in semiarid soils. - Phytostabilization using by-products as amendments is a suitable approach for long-term immobilization of various trace elements in semiarid contaminated soils.

  6. Socioeconomic status and exposure to disinfection by-products in drinking water in Spain

    Directory of Open Access Journals (Sweden)

    Serra Consol

    2011-03-01

    Full Text Available Abstract Background Disinfection by-products in drinking water are chemical contaminants that have been associated with cancer and other adverse effects. Exposure occurs from consumption of tap water, inhalation and dermal absorption. Methods We determined the relationship between socioeconomic status and exposure to disinfection by-products in 1271 controls from a multicentric bladder cancer case-control study in Spain. Information on lifetime drinking water sources, swimming pool attendance, showering-bathing practices, and socioeconomic status (education, income was collected through personal interviews. Results The most highly educated subjects consumed less tap water (57% and more bottled water (33% than illiterate subjects (69% and 17% respectively, p-value = 0.003. These differences became wider in recent time periods. The time spent bathing or showering was positively correlated with attained educational level (p Conclusions The most highly educated subjects were less exposed to chlorination by-products through ingestion but more exposed through dermal contact and inhalation in pools and showers/baths. Health risk perceptions and economic capacity may affect patterns of water consumption that can result in differences in exposure to water contaminants.

  7. A Review of Antioxidant Peptides Derived from Meat Muscle and By-Products.

    Science.gov (United States)

    Liu, Rui; Xing, Lujuan; Fu, Qingquan; Zhou, Guang-Hong; Zhang, Wan-Gang

    2016-09-20

    Antioxidant peptides are gradually being accepted as food ingredients, supplemented in functional food and nutraceuticals, to positively regulate oxidative stress in the human body against lipid and protein oxidation. Meat muscle and meat by-products are rich sources of proteins and can be regarded as good materials for the production of bioactive peptides by use of enzymatic hydrolysis or direct solvent extraction. In recent years, there has been a growing number of studies conducted to characterize antioxidant peptides or hydrolysates derived from meat muscle and by-products as well as processed meat products, including dry-cured hams. Antioxidant peptides obtained from animal sources could exert not only nutritional value but also bioavailability to benefit human health. This paper reviews the antioxidant peptides or protein hydrolysates identified in muscle protein and by-products. We focus on the procedure for the generation of peptides with antioxidant capacity including the acquisition of crude peptides, the assessment of antioxidant activity, and the purification and identification of the active fraction. It remains critical to perform validation experiments with a cell model, animal model or clinical trial to eliminate safety concerns before final application in the food system. In addition, some of the common characteristics on structure-activity relationship are also reviewed based on the identified antioxidant peptides.

  8. Some chemical properties of irradiated empty fruit bunch and palm press fiber of oil palm byproducts

    International Nuclear Information System (INIS)

    Matsuhashi, Shinpei; Kume, Tamikazu; Othman, Z.BT.; Awang, M.R.

    1992-01-01

    Effect of irradiation and alkali treatment for digestibility of oil palm by-products by commercial enzymes was investigated to obtain the informations about formation of carbohydrate polymers or sugar components for producing animal feed from cellulosic by-products. According to the colorimetric analysis, produced reducing sugar from holocellulose of Empty Fruit Bunch (EFB) and Palm Press Fiber (PPF) by Cellulase ONOZUKA 3S were about ten times higher than those from raw samples. The results show that the digestibility of EFB and PPF increased significantly by delignification. The differences of digestibility between irradiated and unirradiated samples were shown clearly by the combination of enzymatic degradation and the HPLC analysis. By irradiation, digestibility of EFB was significantly increased. Higher dose is more effective for the digestion of EFB by enzyme. Alkali treatment is also quite effective to enzymatic degradation. The difference of neutral sugar component was observed between alkali treated and untreated samples. These results suggest that the combination of alkali treatment and irradiation is effective for digestion by enzyme. The analysis of products by HPLC after enzymatic degradation is useful method to examine the digestibility and the sugar composition of oil palm by-products. (author)

  9. Biogas final digestive byproduct applied to croplands as fertilizer contains high levels of steroid hormones

    International Nuclear Information System (INIS)

    Rodriguez-Navas, Carlos; Björklund, Erland; Halling-Sørensen, Bent; Hansen, Martin

    2013-01-01

    In this study we evaluate and demonstrate the occurrence of nine natural and one synthetic steroid hormone, including estrogens, androgens and progestagens in biogas final digestate byproduct (digestion liquid) commonly used as an agricultural fertilizer. We investigated two biogas sites that utilize different anaerobic digestion technologies (mesophilic and thermophilic) from swine manure and other organic wastes. Individual hormone concentration levels were observed up to 1478 ng g −1 dry weight or 22.5 mg kg −1 N with estrone and progesterone reaching highest concentration levels. Evaluation of the potential environmental burden through the application in agriculture was also assessed on the basis of predicted environmental concentrations. This study indicates that the biogas digestion process does not completely remove steroid hormones from livestock manure and use of final digestate byproduct on croplands contributes to the environmental emission of hormones. -- Eight steroid hormones were found in biogas digestate byproduct in the ng g −1 dm levels. Anaerobic digestion processes do not completely remove steroid hormones from organic waste residues

  10. The production and utilization of by-product agricultural fertilizer from flue gases

    International Nuclear Information System (INIS)

    Frank, N.W.; Hirano, S.

    1991-01-01

    The electron-beam process is one of the most effective methods for removing SO 2 and NO x from industrial flue gases and producing a usable by-product. This flue gas treatment consists of adding a small amount of ammonia to the flue gas and irradiating the gas by means of an electron beam. This causes reactions which convert SO 2 and NO x to ammonium sulfate and ammonium nitrate. These salts are then collected from the flue gas by conventional collectors, such as a baghouse or electrostatic precipitator. This paper will describe the potential for production of the fertilizer and will analyze the market potential and consumption of the by-product. A principal focus of the work is an analysis and quantification of the major large-scale, growing and profitable markets for utility solid wastes that can be generated in the form of agricultural fertilizer. Cost study data is arranged to define the impact of commercial by-product field and revenue on the economics of full scale SO 2 and NO x emission reduction activity

  11. Investigation of grass carp by-products from a fish farm in Vojvodina

    Science.gov (United States)

    Okanović, Đ.; Tasić, T.; Kormanjoš, Š.; Ikonić, P.; Šojić, B.; Pelić, M.; Ristić, M.

    2017-09-01

    The quantity of by-products obtained during grass carp primary processing and chemical characteristics of internal organs were investigated. The total average weight of byproducts was 783.69 g (36.99%) in relation to live body weight which was cca 2118.5 g. The by-product contributing the largest quantity to total live body weight was the head with 458.22 g (21.63% of live body weight), followed by complete internal organs and tail and fins, with weights of 198.03 g or 9.35% and 57.93 g or 2.73%, respectively. The chemical composition of internal organs from the grass carp was mostly water (65.55%), following by crude fats and crude proteins (17.47% and 13.35%, respectively). The low collagen content (13.43% of total crude protein) indicates the high nutritional quality of the protein content from internal organs. Nitrogenous complexes from the internal organs were predominantly proteins. Digestible nitrogen was approximately equal to total nitrogen (89.38%), indicating that all proteins of the internal organs had high biological value. Based on the results obtained, it can be concluded that carp internal organs could be important sources of proteins and fats, and thus, could be used in Serbia as a raw material for feed and technical fat production.

  12. Protein Bread Fortification with Cumin and Caraway Seeds and By-Product Flour

    Science.gov (United States)

    Sayed Ahmad, Bouchra; Talou, Thierry; Straumite, Evita; Sabovics, Martins; Kruma, Zanda; Saad, Zeinab; Hijazi, Akram

    2018-01-01

    Malnutrition continues to be a key health problem in developing regions. The valorization of food waste appears as an ideal way to prevent malnutrition and improve people’s access to food. Cumin (Cuminum cyminum L.) and caraway (Carum carvi L.) oilseeds are commonly used for cuisine and medicinal purposes. However, remaining cakes after oil extraction are usually underutilized. In order to assess the usefulness of these by-products in food applications, this study investigated the effect of their addition to protein bread formulations. Different levels (2, 4 and 6%) of whole seeds and cakes flour were used in the study. Fortified protein bread samples were compared to control protein bread and evaluated for their sensory, color, moisture, hardness properties, nutritional values as well as their biological activity. Results indicated that bread fortification shows a significant effect on bread properties depending on fortification level. A higher acceptability was observed specially for bread fortified with by-products flour. Increased tendencies of color darkness, moisture content, bread hardness, nutritional values as well as total phenolic content and radical scavenging activity compared to control bread were observed as the percentage of fortification increased in both cases. The overall results showed that the addition of cumin and caraway seeds and by-product flour can improve the antioxidant potential and overall quality of protein bread. PMID:29495324

  13. Antibacterial, antiviral, and antifungal properties of wines and winery byproducts in relation to their flavonoid content.

    Science.gov (United States)

    Friedman, Mendel

    2014-07-02

    Grapes produce organic compounds that may be involved in the defense of the plants against invading phytopathogens. These metabolites include numerous phenolic compounds that are also active against human pathogens. Grapes are used to produce a variety of wines, grape juices, and raisins. Grape pomace, seeds, and skins, the remains of the grapes that are a byproduct of winemaking, also contain numerous bioactive compounds that differ from those found in grapes and wines. This overview surveys and interprets our present knowledge of the activities of wines and winery byproducts and some of their bioactive components against foodborne (Bacillus cereus, Campylobacter jejuni, Escherichia coli, Listeria monocytogenes, Salmonella enterica, Staphylococcus aureus, Yersinia enterocolitica, Vibrio cholerae, Vibrio vulnificus), medical (Helicobacter pylori, Klebsiella pneumoniae), and oral pathogenic bacteria, viruses (adeno, cytomegalo, hepatitis, noro, rota), fungi (Candida albicans, Botrytis cinerea), parasites (Eimeria tenella, Trichomonas vaginalis), and microbial toxins (ochratoxin A, Shiga toxin) in culture, in vivo, and in/on food (beef, chicken, frankfurters, hot dogs, lettuce, oysters, peppers, pork, sausages, soup, spinach) in relation to composition and sensory properties. Also covered are antimicrobial wine marinades, antioxidative and immunostimulating aspects, and adverse effects associated with wine consumption. The collated information and suggested research needs might facilitate and guide further studies needed to optimize the use of wines and byproducts to help improve microbial food safety and prevent or treat animal and human infections.

  14. Formation of by-products at radiation - chemical treatment of water solutions of chloroform

    International Nuclear Information System (INIS)

    Ahmedov, S.A.; Abdullayev, E.T.; Gurbanov, M.A.; Gurbanov, A.H.; Ibadov, N.A.

    2006-01-01

    Full text: Radiation-chemical treatment is considered as a perspective method of water purification from chloroform. It provides the high level of purification (98 percent) of water solutions from chloroform and other chlorine-containing compounds. Meanwhile, other chlorine-containing products can be formed during the process of chloroform degradation and as a result of it the quality of water can change. This work studies the formation of by-products of γ-radiolysis of water solutions at various initial contents of chloroform. Dichlormethane and tetrachlorethane are identified as by-products. It is shown that at high contents of chloroform after certain adsorbed dose the forming products are reducing till their full disappearing. At small contents of chloroform in the studied interval of doses di-chlor-methane is forming. Differences of dose dependences of by-products at various contents of chloroform can be connected with the transition from radical mechanism to chain reaction at high concentrations of chloroform in solutions saturated by oxygen. pH-solutions also reduces during the radiation till pH=1, although this reduction also depends on initial concentration of chloroform. Essential change of pH occurs only at the radiolysis of water solutions containing chloroform ≥0,2 percent. And at radiating of 0,03 percent solution pH reduces only till 4 - 4,5

  15. Protein Bread Fortification with Cumin and Caraway Seeds and By-Product Flour

    Directory of Open Access Journals (Sweden)

    Bouchra Sayed Ahmad

    2018-02-01

    Full Text Available Malnutrition continues to be a key health problem in developing regions. The valorization of food waste appears as an ideal way to prevent malnutrition and improve people’s access to food. Cumin (Cuminum cyminum L. and caraway (Carum carvi L. oilseeds are commonly used for cuisine and medicinal purposes. However, remaining cakes after oil extraction are usually underutilized. In order to assess the usefulness of these by-products in food applications, this study investigated the effect of their addition to protein bread formulations. Different levels (2, 4 and 6% of whole seeds and cakes flour were used in the study. Fortified protein bread samples were compared to control protein bread and evaluated for their sensory, color, moisture, hardness properties, nutritional values as well as their biological activity. Results indicated that bread fortification shows a significant effect on bread properties depending on fortification level. A higher acceptability was observed specially for bread fortified with by-products flour. Increased tendencies of color darkness, moisture content, bread hardness, nutritional values as well as total phenolic content and radical scavenging activity compared to control bread were observed as the percentage of fortification increased in both cases. The overall results showed that the addition of cumin and caraway seeds and by-product flour can improve the antioxidant potential and overall quality of protein bread.

  16. Bioactive compounds from flesh and by-product of fresh-cut watermelon cultivars.

    Science.gov (United States)

    Tarazona-Díaz, Martha Patricia; Viegas, Joana; Moldao-Martins, Margarida; Aguayo, Encarna

    2011-03-30

    The fresh-cut industry produces thousands of tons of waste in non-edible portions that present an environmental and management problem. These by-products could be reused, in particular, to obtain bioactive compounds. In this study, five different fresh-cut watermelon cultivars were assessed for their flesh and by-product bioactive contents. The amount of by-product varied between 31.27 and 40.61% of initial fresh weight (f.w.) depending on the cultivar. Watermelon cultivars were poor sources of total antioxidant, and the content was similar between rind and flesh samples (46.96 vs 43.46 mg ascorbic acid equivalent antioxidant capacity kg(-1) f.w.). However, the rind had a moderate total phenolic content higher than that of the flesh (458 vs 389 mg chlorogenic acid equivalent kg(-1) f.w.) and a much higher content of the amino acid citrulline (3.34 vs 2.33 g kg(-1) f.w.), which has potential bioactive properties. Watermelon rind offers quantitative interest as a natural source of citrulline, particularly Fashion, a dark-skinned, seedless cultivar. More research is required on the efficient extraction of citrulline from watermelon rind and its suitability as an additive to drinks, juices or others products to produce new functional food products with valid health claims. Copyright © 2010 Society of Chemical Industry.

  17. Immobilization of low and intermediate level radioactive liquid wastes using some industrial by-product materials

    International Nuclear Information System (INIS)

    Sami, N.M.; EI-Dessouky, M.I.; Abou EI-Nour, F.H.; Abdel-Khalik, M.

    2006-01-01

    Immobilization of low and intermediate level.radioactive liquid wastes in different matrices: ordinary Portland cement and cement mixed with some industrial byproduct: by-pass kiln cement dust, blast furnace slag and ceramic sludge was studied. The effect of these industrial by-product materials on the compressive strength, water immersion, radiation effect and teachability were investigated. The obtained results showed that, these industrial by-product improve the cement pastes where they increase the compressive strength, decrease the leaching rate for radioactive cesium-137 and cobalt-60 ions through the solidified waste forms and increase resistance for y-radiation. It is found that, solidified waste forms of intermediate level liquid waste (ILLW) had high compressive strength values more than those obtained from low level liquid waste (LLLW). The compressive strength increased after immersion in different leachant for one and three months for samples with LLLW higher than those obtained for ILLW. The cumulative fractions released of cesium-137 and cobalt-60 of solidified waste forms of LLLW was lower than those obtained for ILLW

  18. Nuclear Waste Materials Characterization Center. Semiannual progress report, April 1985-September 1985

    International Nuclear Information System (INIS)

    Mendel, J.E.

    1985-12-01

    Work continued on converting MCC Quality Assurance practices to comply with the national QA standard for nuclear facilities, ANSI/ASME NQA-1. Support was provided to the following: Office of Geologic Repositories; Salt Repository Project; Basalt Waste Isolation Project; Office of Defense Waste and Byproducts Management; Hanford Programs; Transportation Technology Center; and West Valley Demonstration Project. (LM)

  19. Nuclear Legislation in OECD and NEA Countries. Regulatory and Institutional Framework for Nuclear Activities - United States

    International Nuclear Information System (INIS)

    2015-01-01

    This country profile provide comprehensive information on the regulatory and Institutional Framework governing nuclear activities as well as a detailed review of a full range of nuclear law topics, including: mining regime; radioactive substances; nuclear installations; trade in nuclear materials and equipment; radiation protection; radioactive waste management; non-proliferation and physical protection; transport; and nuclear third party liability. The profile is complemented by reproductions of the primary legislation regulating nuclear activities in the country. Content: I. General Regulatory Regime: 1. Introduction; 2. Mining regime; 3. Radioactive substances, nuclear fuel and equipment (Special nuclear material; Source material; By-product material; Agreement state programmes); 4. Nuclear installations (Initial licensing; Operation and inspection, including nuclear safety; Operating licence renewal; Decommissioning; Emergency response); 5. Radiological protection (Protection of workers; Protection of the public); 6. Radioactive waste management (High-level waste; Low-level waste; Disposal at sea; Uranium mill tailings; Formerly Utilized Sites Remedial Action Program - FUSRAP); 7. Non-proliferation and exports (Exports of source material, special nuclear material, production or utilisation facilities and sensitive nuclear technology; Exports of components; Exports of by-product material; Exports and imports of radiation sources; Conduct resulting in the termination of exports or economic assistance; Subsequent arrangements; Technology exports; Information and restricted data); 8. Nuclear security; 9. Transport; 10. Nuclear third party liability; II. Institutional Framework: 1. Regulatory and supervisory authorities (Nuclear Regulatory Commission - NRC; Department of Energy - DOE; Department of Labor - DOL; Department of Transportation - DOT; Environmental Protection Agency - EPA); 2. Public and semi-public agencies: A. Cabinet-level departments (Department of

  20. Disinfection Byproduct Formation in Reverse-Osmosis Concentrated and Lyophilized Natural Organic Matter from a Drinking Water Source

    Science.gov (United States)

    Drinking water treatment and disinfection byproduct (DBP) research can be complicated by natural organic matter (NOM) temporal variability. NOM preservation by lyophilization (freeze-drying) has been long practiced to address this issue; however, its applicability for drinking wa...

  1. Review and Analysis of Alternatives for the Valorisation of Agro-Industrial Olive Oil By-Products

    Directory of Open Access Journals (Sweden)

    Julio Berbel

    2018-01-01

    Full Text Available By-products and waste from olive production (agriculture and the olive oil industry (mills and refineries are an important environmental issue in Mediterranean areas. Industrial waste and by-products contain highly valuable components that can also be phytotoxic. This article reviews recent research on the valorisation of olive by-products under the bioeconomy strategy. The alternatives are classified according to the ‘bioeconomy value pyramid’, which prioritises higher value uses over the current energy and compost valorisation. Special attention is paid to the use of these by-products for animal feed that can be improved by reducing the content of saturated fatty acids (SFAs and increase the polyunsaturated fatty acids amount considered beneficial in response to their use; this makes the food healthier for humans while simultaneously reducing feeding costs and the environmental impact of livestock.

  2. E3 Success Story - Working Together: E3 Ohio and the Ohio By-Product Synergy Network

    Science.gov (United States)

    The Mid-Ohio Regional Planning Commission (MORPC) received funding to support the integration of the national E3 sustainability initiative with the Ohio By-Product Synergy (BPS) Network to create an efficient and replicable model for reducing GHGs.

  3. Self-Healing Capacity of Asphalt Mixtures Including By-Products Both as Aggregates and Heating Inductors.

    Science.gov (United States)

    Vila-Cortavitarte, Marta; Jato-Espino, Daniel; Castro-Fresno, Daniel; Calzada-Pérez, Miguel Á

    2018-05-15

    Major advances have been achieved in the field of self-healing by magnetic induction in which the addition of metallic particles into asphalt mixtures enables repairing their own cracks. This technology has already been proven to increase the life expectancy of roads. Nevertheless, its higher costs in comparison with conventional maintenance caused by the price of virgin metallic particles still makes it unattractive for investment. This research aimed at making this process economically accessible as well as environmentally efficient. To this end, an intense search for suitable industrial by-products to substitute both the virgin metal particles and the natural aggregates forming asphalt mixtures was conducted. The set of by-products used included sand blasting wastes, stainless shot wastes, and polished wastes as metallic particles and other inert by-products as aggregates. The results demonstrated that the by-products were adequately heated, which leads to satisfactory healing ratios in comparison with the reference mixture.

  4. Milk Technological Properties as Affected by Including Artichoke By-Products Silages in the Diet of Dairy Goats

    Directory of Open Access Journals (Sweden)

    Raquel Muelas

    2017-12-01

    Full Text Available Traditional farming practices include the use of local agricultural by-products in the diet of ruminants. Artichoke harvesting and transformation yield high amounts of by-products that, if properly used, may reduce farming costs and the environmental impact of farming. The present study tests the inclusion of silages from artichoke by-products (plant and outer bracts in the diet of dairy goats (0%, 12.5% and 25% inclusion on the technological and sensory properties of milk during a five-month study. Milk composition, color, stability, coagulation and fermentation properties remained unaffected by diet changes. Panelists were not able to differentiate among yogurts obtained from those milks by discriminant triangular sensory tests. Silages of artichoke by-products can be included in isoproteic and isoenergetic diets for dairy goats, up to a 25% (feed dry matter, without negatively affecting milk technological and sensory properties whereas reducing feeding costs.

  5. Impact of Ovine Whey Protein Concentrates and Clarification By-Products on the Yield and Quality of Whey Cheese

    OpenAIRE

    Carlos D. Pereira; Olga Díaz; Angel Cobos

    2007-01-01

    The effects of the addition of whey protein concentrates and clarification by-products obtained from ovine cheese whey and deproteinized whey (Sorelho) on the yield and quality of the whey cheese (Requeijão) have been evaluated. Whey protein concentrates were obtained by ultrafiltration of skimmed whey and Sorelho. The clarification by-products were obtained after the treatment of the skimmed whey and Sorelho by thermocalcic precipitation and microfiltration with two membranes (0.20 and 0.65 ...

  6. Halogenated by-products of disinfecting ozonised recreational waters; Subproductos halaogenados de desinfeccion en aguas recreacionales ozonizadas

    Energy Technology Data Exchange (ETDEWEB)

    Goma i Huguet, A.; Quintana i Comte, J.; Soler i Vilaro, J.

    2005-07-01

    Recreational water like the present in swimming pools suffers, more than water from supply, formation of certain by-products in the local disinfection system because a mechanism of accumulation. Using advanced oxidation process, like onization, drives to a reduction of such an effect. Assessment of the presence of these disinfection by-products with and without onization, as well as the discussion of certain key aspects of how to ozonate, are the aim of this paper. (Author) 7 refs.

  7. A nuclear mutation defective in mitochondrial recombination in yeast.

    OpenAIRE

    Ling, F; Makishima, F; Morishima, N; Shibata, T

    1995-01-01

    Homologous recombination (crossing over and gene conversion) is generally essential for heritage and DNA repair, and occasionally causes DNA aberrations, in nuclei of eukaryotes. However, little is known about the roles of homologous recombination in the inheritance and stability of mitochondrial DNA which is continuously damaged by reactive oxygen species, by-products of respiration. Here, we report the first example of a nuclear recessive mutation which suggests an essential role for homolo...

  8. Value-added potential of expeller-pressed canola oil refining: characterization of sinapic acid derivatives and tocopherols from byproducts.

    Science.gov (United States)

    Chen, Yougui; Thiyam-Hollander, Usha; Barthet, Veronique J; Aachary, Ayyappan A

    2014-10-08

    Valuable phenolic antioxidants are lost during oil refining, but evaluation of their occurrence in refining byproducts is lacking. Rapeseed and canola oil are both rich sources of sinapic acid derivatives and tocopherols. The retention and loss of sinapic acid derivatives and tocopherols in commercially produced expeller-pressed canola oils subjected to various refining steps and the respective byproducts were investigated. Loss of canolol (3) and tocopherols were observed during bleaching (84.9%) and deodorization (37.6%), respectively. Sinapic acid (2) (42.9 μg/g), sinapine (1) (199 μg/g), and canolol (344 μg/g) were found in the refining byproducts, namely, soap stock, spent bleaching clay, and wash water, for the first time. Tocopherols (3.75 mg/g) and other nonidentified phenolic compounds (2.7 mg sinapic acid equivalent/g) were found in deodistillates, a byproduct of deodorization. DPPH radical scavenging confirmed the antioxidant potential of the byproducts. This study confirms the value-added potential of byproducts of refining as sources of endogenous phenolics.

  9. Dry flue gas desulfurization by-product application effects on plant uptake and soil storage changes in a managed grassland.

    Science.gov (United States)

    Burgess-Conforti, Jason R; Brye, Kristofor R; Miller, David M; Pollock, Erik D; Wood, Lisa S

    2018-02-01

    Environmental regulations mandate that sulfur dioxide (SO 2 ) be removed from the flue gases of coal-fired power plants, which results in the generation of flue gas desulfurization (FGD) by-products. These FGD by-products may be a viable soil amendment, but the large amounts of trace elements contained in FGD by-products are potentially concerning. The objective of this study was to evaluate the effects of land application of a high-Ca dry FGD (DFGD) by-product on trace elements in aboveground biomass and soil. A high-Ca DFGD by-product was applied once at a rate of 9 Mg ha -1 on May 18, 2015 to small plots with mixed-grass vegetation. Soil and biomass were sampled prior to application and several times thereafter. Aboveground dry matter and tissue As, Co, Cr, Hg, Se, U, and V concentrations increased (P  0.05) from pre-application levels or the unamended control within 3 to 6 months of application. Soil pH in the amended treatment 6 months after application was greater (P by-product application compared to the unamended control. High-Ca DFGD by-products appear to be useful as a soil amendment, but cause at least a temporary increase in tissue concentrations of trace elements, which may be problematic for animal grazing situations.

  10. Bio-cellulose Production by Beijerinckia fluminensis WAUPM53 and Gluconacetobacter xylinus 0416 in Sago By-product Medium.

    Science.gov (United States)

    Voon, W W Y; Muhialdin, B J; Yusof, N L; Rukayadi, Y; Meor Hussin, A S

    2018-06-19

    Bio-cellulose is the microbial extracellular cellulose that is produced by growing several microorganisms on agriculture by-products, and it is used in several food applications. This study aims to utilize sago by-product, coconut water, and the standard medium Hestrin-Schramm as the carbon sources in the culture medium for bio-cellulose production. The bacteria Beijerinkia fluminensis WAUPM53 and Gluconacetobacter xylinus 0416 were selected based on their bio-cellulose production activity. The structure was determined by Fourier transform infrared spectroscopy and scanning electron microscopy, while the toxicity safety was evaluated by brine shrimp lethality test. The results of Fourier transform infrared spectroscopy showed that the bio-cellulose produced by B. fluminensis cultivated in sago by-products was of high quality. The bio-cellulose production by B. fluminensis in the sago by-product medium was slightly higher than that in the coconut water medium and was comparable with the production in the Hestrin-Schramm medium. Brine shrimp lethality test confirmed that the bio-cellulose produced by B. fluminensis in the sago by-product medium has no toxicity, which is safe for applications in the food industry. This is the first study to determine the high potential of sago by-product to be used as a new carbon source for the bio-cellulose production.

  11. Functional properties of meat by-products and mechanically separated chicken (MSC) in a high-moisture model petfood system.

    Science.gov (United States)

    Rivera, J A; Sebranek, J G; Rust, R E

    2000-05-01

    Contributions to water retention capacity (% WRC) and texture changes were determined for pork by-products (lung lobes, kidneys), chicken viscera (head, feet and viscera) and mechanically separated chicken (MSC) as affected by pH and various salts in a high-moisture model system. The % WRC for meat by-products and MSC was increased by increased pH (4.5-6.8). Pork lungs and MSC had the highest % WRC (pmeat by-products. Meat by-product % WRC was not signifcantly (p>0.05) affected by salt (2%), phosphate (0.3%) or NaOH (0.075%). Chicken viscera had the lowest (pmeat by-products and MSC. Strong negative correlations (p<0.05) were obtained for texture with total collagen, soluble collagen and high ionic strength soluble (HIS) proteins. These results should be considered for product quality changes when these by-products are used in formulation of high moisture pet food products.

  12. Comparison of permanganate preoxidation and preozonation on algae containing water: cell integrity, characteristics, and chlorinated disinfection byproduct formation.

    Science.gov (United States)

    Xie, Pengchao; Ma, Jun; Fang, Jingyun; Guan, Yinghong; Yue, Siyang; Li, Xuchun; Chen, Liwei

    2013-12-17

    Aqueous suspensions of Microcystis aeruginosa were preoxidized with either ozone or permanganate and then subjected to chlorination under conditions simulating drinking water purification. The impacts of the two oxidants on the algal cells and on the subsequent production of dissolved organic matter and disinfection byproducts were investigated. Preozonation dramatically increased disinfection byproduct formation during chlorination, especially the formation of haloaldehydes, haloacetonitriles, and halonitromethanes. Preoxidation with permanganate had much less effect on disinfection byproduct formation. Preozonation destroyed algal cell walls and cell membranes to release intracellular organic matter (IOM), and less than 2.0% integrated cells were left after preozonation with the dosage as low as 0.4 mg/L. Preoxidation with permanganate mainly released organic matter adsorbed on the cells' surface without causing any damage to the cells' integrity, so the increase in byproduct formation was much less. More organic nitrogen and lower molecular weight precursors were produced in a dissolved phase after preozonation than permanganate preoxidation, which contributes to the significant increase of disinfection byproducts after preozonation. The results suggest that permanganate is a better choice than ozone for controlling algae derived pollutants and disinfection byproducts.

  13. Analysis of Organic and Inorganic Contaminants in Dried Sewage Sludge and By-Products of Dried Sewage Sludge Gasification

    Directory of Open Access Journals (Sweden)

    Sebastian Werle

    2014-01-01

    Full Text Available Organic and inorganic contaminants in sewage sludge may cause their presence also in the by-products formed during gasification processes. Thus, this paper presents multidirectional chemical instrumental activation analyses of dried sewage sludge as well as both solid (ash, char coal and liquid (tar by-products formed during sewage gasification in a fixed bed reactor which was carried out to assess the extent of that phenomenon. Significant differences were observed in the type of contaminants present in the solid and liquid by-products from the dried sewage sludge gasification. Except for heavy metals, the characteristics of the contaminants in the by-products, irrespective of their form (solid and liquid, were different from those initially determined in the sewage sludge. It has been found that gasification promotes the migration of certain valuable inorganic compounds from sewage sludge into solid by-products which might be recovered. On the other hand, the liquid by-products resulting from sewage sludge gasification require a separate process for their treatment or disposal due to their considerable loading with toxic and hazardous organic compounds (phenols and their derivatives.

  14. Effect of UV-C radiation on bioactive compounds of pineapple (Ananas comosus L. Merr.) by-products.

    Science.gov (United States)

    Freitas, Ana; Moldão-Martins, Margarida; Costa, Helena S; Albuquerque, Tânia G; Valente, Ana; Sanches-Silva, Ana

    2015-01-01

    The industrial processing of pineapple generates a high quantity of by-products. To reduce the environmental impact of these by-products and the inherent cost of their treatment, it is important to characterise and valorise these products, converting them into high added value products. Ultra-violet radiation is one of the main sustainable sanitation techniques for fruits. Since this radiation can induce plant stress which can promote the biosynthesis of bioactive compounds, it is important to evaluate its effect in fruits. The amounts of vitamins (C and E) and carotenoids (α-carotene, β-carotene, β-cryptoxanthin, lutein, lycopene, neoxanthin, violaxanthin and zeaxanthin) in pineapple by-products (core and rind) were analysed before and after treatment with UV radiation. All treated and untreated pineapple by-products contained β-carotene as the main carotenoid (rind, 2537-3225 µg; and core, 960-994 µg 100 g(-1) DW). Pineapple rind also contained lutein (288-297 µg 100 g(-1) DW) and α-carotene (89-126 µg 100 g(-1) DW). The results provide evidence of the potential of pineapple by-products as a source of bioactive compounds with antioxidant activity, which can be used by pharmaceutical, cosmetics and food industries. In addition, UV-C was shown to be a treatment that can add nutritional value to pineapple by-products. © 2014 Society of Chemical Industry.

  15. Fifty years with nuclear fission

    International Nuclear Information System (INIS)

    Behrens, J.W.; Carlson, A.D.

    1989-01-01

    The news of the discovery of nuclear fission, by Otto Hahn and Fritz Strassmann in Germany, was brought to the United States by Niels Bohr in January 1939. Since its discovery, the United States, and the world for that matter, has never been the same. It therefore seemed appropriate to acknowledge the fifieth anniversary of its discovery by holding a topical meeting entitled, ''Fifty Years with Nuclear Fission,'' in the United States during the year 1989. The objective of the meeting was to bring together pioneers of the nuclear industry and other scientists and engineers to report on reminiscences of the past and on the more recent development in fission science and technology. The conference highlighted the early pioneers of the nuclear industry by dedicated a full day (April 26), consisting of two plenary sessions, at the National Academy of Sciences (NAS) in Washington, DC. More recent developments in fission science and technology in addition to historical reflections were topics for two fully days of sessions (April 27 and 28) at the main site of the NIST in Gaithersburg, Maryland. The wide range of topics covered in this Volume 1 by this topical meeting included plenary invited, and contributed sessions entitled: Preclude to the First Chain Reaction -- 1932 to 1942; Early Fission Research -- Nuclear Structure and Spontaneous Fission; 50 Years of Fission, Science, and Technology; Nuclear Reactors, Secure Energy for the Future; Reactors 1; Fission Science 1; Safeguards and Space Applications; Fission Data; Nuclear Fission -- Its Various Aspects; Theory and Experiments in Support of Theory; Reactors and Safeguards; and General Research, Instrumentation, and By-Product. The individual papers have been cataloged separately

  16. Nuclear power

    International Nuclear Information System (INIS)

    Abd Khalik Wood

    2005-01-01

    This chapter discussed the following topics related to the nuclear power: nuclear reactions, nuclear reactors and its components - reactor fuel, fuel assembly, moderator, control system, coolants. The topics titled nuclear fuel cycle following subtopics are covered: , mining and milling, tailings, enrichment, fuel fabrication, reactor operations, radioactive waste and fuel reprocessing. Special topic on types of nuclear reactor highlighted the reactors for research, training, production, material testing and quite detail on reactors for electricity generation. Other related topics are also discussed: sustainability of nuclear power, renewable nuclear fuel, human capital, environmental friendly, emission free, impacts on global warming and air pollution, conservation and preservation, and future prospect of nuclear power

  17. Nuclear regulation of South African mines: An industry perspective

    International Nuclear Information System (INIS)

    Wymer, D.G.

    2001-01-01

    South African mines have become subject to a rigid and prescriptive system of nuclear regulation that has its roots in the past when South Africa embarked upon a period of nuclear development spanning the full nuclear fuel cycle, and in which the South African gold mining industry once played a major part in the supply of uranium as a low grade by-product. Radiation hazards in the mines are generally very moderate, even in the few gold mines associated with uranium by-product, and to not warrant the type of regulatory attention normally applied to nuclear installations, or even to uranium mines. The continued imposition of strict nuclear regulatory requirements has caused severe financial hardship and threatens the survival of certain mining operations, while seemingly having little or no health benefits to workers or the public. With the development of modern, comprehensive mine health and safety legislation, a more appropriate, effective, and far less costly vehicle for controlling radiation hazards in mines now exists, utilizing the resources of the Mine Health and Safety Inspectorate. This approach is now being proposed, in the drafting of new legislation, as constituting a better alternative to the nuclear regulation of mines. (author)

  18. Study 2: the precaution applied to long-life nuclear wastes

    International Nuclear Information System (INIS)

    Marignac, Y.

    2000-01-01

    Among the problems bonded to the energy development, some risks take a global aspect. These risks concerned the resources management, the safety and by-products accumulation (greenhouse gases or nuclear wastes). This document deals with the nuclear wastes problem, which is not studied today on at international scale. A first part presents the general problem of the long-life wastes in France to define an indicator for the nuclear wastes production. This criteria allows to measure the prevention strategy efficiency. A second part deals with financial aspects and calculates the cost-efficiency factor of the nuclear wastes storage facing their processing. (A.L.B.)

  19. Nuclear science

    International Nuclear Information System (INIS)

    1989-01-01

    This fact sheet answers specific questions about the Department of Energy's possible acquisition and conversion of a partially completed commercial nuclear power plant to a nuclear materials production facility. The nuclear power plant is the Washington Nuclear Plant number sign 1 owned by the Washington Public Power Supply System and is located on DOE's Hanford Reservation near Richland, Washington

  20. Nuclear science

    International Nuclear Information System (INIS)

    1989-04-01

    This report answers questions about the Department of Energy's possible acquisition and conversion of a partially completed commercial nuclear power plant to a nuclear materials production facility. The nuclear power plant is the Washington Nuclear Plant No.1 owned by the Washington Public Power Supply System and is located on DOE's Hanford Reservation near Richland, Washington

  1. Nuclear medicine

    International Nuclear Information System (INIS)

    Lentle, B.C.

    1986-01-01

    Several growth areas for nuclear medicine were defined. Among them were: cardiac nuclear medicine, neuro-psychiatric nuclear medicine, and cancer diagnosis through direct tumor imaging. A powerful new tool, Positron Emission Tomography (PET) was lauded as the impetus for new developments in nuclear medicine. The political environment (funding, degree of autonomy) was discussed, as were the economic and scientific environments

  2. Nuclear option

    Energy Technology Data Exchange (ETDEWEB)

    Kemm, K R

    1978-05-01

    The global outlook is that nuclear reactors are here to stay and South Africa has already entered the nuclear power stakes. This article discusses the rocketing oil prices, and the alternatives that can be used in power generation, the good safety record of the nuclear industry and the effect that South Africa's first nuclear power station should have on the environment.

  3. Nuclear resisters

    International Nuclear Information System (INIS)

    1981-01-01

    The booklet contains six papers by different authors, under the headings: dangers along the nuclear fuel cycle; the nuclear profiteers; the nuclear state is a police state; a non-disposable future (renewable energy sources, energy conservation); nuclear weapons - out of control; man made madness. (U.K.)

  4. Byproduct-free mass production of compound semiconductor nanowires: zinc phosphide

    Science.gov (United States)

    Chen, Yixi; Polinnaya, Rakesh; Vaddiraju, Sreeram

    2018-05-01

    A method for the mass production of compound semiconductor nanowires that involves the direct reaction of component elements in a chemical vapor deposition chamber (CVD) is presented. This method results in nanowires, without the associated production of any other byproducts such as nanoparticles or three-dimensional (3D) bulk crystals. Furthermore, no unreacted reactants remain mixed with the nanowire product in this method. This byproduct-free nanowire production thus circumvents the need to tediously purify and collect nanowires from a mixture of products/reactants after their synthesis. Demonstration made using zinc phosphide (Zn3P2) material system as an example indicated that the direct reaction of zinc microparticles with phosphorus supplied via the vapor phase results in the production of gram quantities of nanowires. To enhance thermal transport and achieve the complete reaction of zinc microparticles, while simultaneously ensuring that the microparticles do not agglomerate into macroscale zinc particles and partly remain unreacted (owing to diffusion limitations), pellets composed of mixtures of zinc and a sacrificial salt, NH4Cl, were employed as the starting material. The sublimation by decomposition of NH4Cl in the early stages of the reaction leaves a highly porous pellet of zinc composed of only zinc microparticles, which allows for inward diffusion of phosphorus/outward diffusion of zinc and the complete conversion of zinc into Zn3P2 nanowires. NH4Cl also aids in removal of any native oxide layer present on the zinc microparticles that may prevent their reaction with phosphorus. This method may be used to mass produce many other nanowires in a byproduct-free manner, besides Zn3P2.

  5. Effects of soot by-product from the synthesis of engineered metallofullerene nanomaterials on terrestrial invertebrates.

    Science.gov (United States)

    Johnson, David R; Boyd, Robert E; Bednar, Anthony J; Weiss, Charles A; Hull, Matt S; Coleman, Jessica G; Kennedy, Alan J; Banks, Cynthia J; Steevens, Jeffery A

    2018-02-23

    The synthesis of carbon-based nanomaterials is often inefficient, generating large amounts of soot with metals as waste by-product. Currently, there are no specific regulations for disposal of engineered nanomaterials or the waste by-products resulting from their synthesis, so it is presumed that by-products are disposed of in the same way as the parent (bulk) materials. We studied the terrestrial toxicity of soot from gadolinium metallofullerene nanomanufacturing on earthworms (Eisenia fetida) and isopods (Porcellio scaber). The metallofullerene soot consisted of carbon particle agglomerates in the nanometer and submicrometer ranges (1-100 and 101-999 nm, respectively), with metals used during nanomanufacturing detectable on the particles. Despite high metal concentrations (>100 000 mg/kg) in the soot, only a relatively small amount of metals leached out of a spiked field soil, suggesting only moderate mobility. Seven- and 14-d exposures in field soil demonstrated that the soot was only toxic to earthworms at high concentrations (>10 000 mg/kg); however, earthworms avoided spiked soils at lower concentrations (as low as 500 mg/kg) and at lower soil pH. The presence of soot in food and soil did not cause isopod avoidance. These data demonstrate that metallofullerene soot from nanomanufacturing may only be toxic to earthworms at high concentrations representative of improper disposal or accidental spills. However, our results indicate that terrestrial invertebrates may avoid soils contaminated with soot at sublethal concentrations. Environ Toxicol Chem 2018;9999:1-12. Published 2018 Wiley Periodicals, Inc. on behalf of SETAC. This article is a US government work, and as such, is in the public domain in the United States of America. Published 2018 Wiley Periodicals, Inc. on behalf of SETAC. This article is a US government work, and as such, is in the public domain in the United States of America.

  6. Ant-plant mutualism: a dietary by-product of a tropical ant's macronutrient requirements.

    Science.gov (United States)

    Arcila Hernández, Lina M; Sanders, Jon G; Miller, Gabriel A; Ravenscraft, Alison; Frederickson, Megan E

    2017-12-01

    Many arboreal ants depend on myrmecophytic plants for both food and shelter; in return, these ants defend their host plants against herbivores, which are often insects. Ant-plant and other mutualisms do not necessarily involve the exchange of costly rewards or services; they may instead result from by-product benefits, or positive outcomes that do not entail a cost for one or both partners. Here, we examined whether the plant-ant Allomerus octoarticulatus pays a short-term cost to defend their host plants against herbivores, or whether plant defense is a by-product benefit of ant foraging for insect prey. Because the food offered by ant-plants is usually nitrogen-poor, arboreal ants may balance their diets by consuming insect prey or associating with microbial symbionts to acquire nitrogen, potentially shifting the costs and benefits of plant defense for the ant partner. To determine the effect of ant diet on an ant-plant mutualism, we compared the behavior, morphology, fitness, stable isotope signatures, and gaster microbiomes of A. octoarticulatus ants nesting in Cordia nodosa trees maintained for nearly a year with or without insect herbivores. At the end of the experiment, ants from herbivore exclosures preferred protein-rich baits more than ants in the control (i.e., herbivores present) treatment. Furthermore, workers in the control treatment were heavier than in the herbivore-exclusion treatment, and worker mass predicted reproductive output, suggesting that foraging for insect prey directly increased ant colony fitness. The gaster microbiome of ants was not significantly affected by the herbivore exclusion treatment. We conclude that the defensive behavior of some phytoecious ants is a by-product of their need for external protein sources; thus, the consumption of insect herbivores by ants benefits both the ant colony and the host plant. © 2017 by the Ecological Society of America.

  7. Evidence for an imidazoline by-product from glycans using tandem mass spectrometry.

    Science.gov (United States)

    Duff, Robert J; Smith, Elaine; Li, Wenzhou; Fodor, Szilan

    2017-06-09

    Herein is reported the separation and identification of a previously unknown imidazoline by-product originating from the fluorescent labeling procedure when applied to enzymatically released N-linked glycans of a human IgG1. The imidazoline by-product was generated via the reductive amination procedure with either sodium cyanoborohydride or 2-picoline borane. Using ultra performance liquid chromatography (UPLC) in conjunction with hydrophilic interaction-based chromatography (HILIC), the 2-aminobenzoic acid (2-AA)-labeled glycans were well-resolved from imidazoline by-products to facilitate direct identification utilizing electrospray ionization mass spectrometry (ESI-MS) with fragmentation. It was found that this minor species (∼2%) was 18.0105u less than the neighboring peak GlcNAc 2 Man 3 GlcNAc 2 Fuc peak, abbreviated as A2G0F at 1582.5899u. While this mass loss corresponds to the mass of a water molecule, the molecular location of loss of water was not straightforward in consideration of the biantennary A2G0F structure. Model studies were carried out using A2G0F standard and N-acetyllactosamine to identify the impurity as an imidazoline ring structure located at the reducing end of the glycan as confirmed by high resolution mass fragment ions. Imidazoline content decreased when the reductant concentration was increased. To conclude, evidence for the imidazoline structure was accomplished through high resolution, high accuracy mass spectrometry (HRAM), and experiments showing chemical susceptibility and isotopically labeled tracers. This study is the first to identify these minor species which likely impact all N-acetylglucosamine-type N-linked glycans from biologics. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Transformation of acesulfame in chlorination: Kinetics study, identification of byproducts, and toxicity assessment.

    Science.gov (United States)

    Li, Adela Jing; Wu, Pengran; Law, Japhet Cheuk-Fung; Chow, Chi-Hang; Postigo, Cristina; Guo, Ying; Leung, Kelvin Sze-Yin

    2017-06-15

    Acesulfame (ACE) is one of the most commonly used artificial sweeteners. Because it is not metabolized in the human gut, it reaches the aquatic environment unchanged. In the present study, the reactivity of ACE in free chlorine-containing water was investigated for the first time. The degradation of ACE was found to follow pseudo-first-order kinetics. The first-order rate increased with decreasing pH from 9.4 to 4.8 with estimated half-lives from 693 min to 2 min. Structural elucidation of the detected transformation products (TPs) was performed by ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. Integration of MS/MS fragments, isotopic pattern and exact mass allowed the characterization of up to 5 different TPs in the ultrapure water extracts analyzed, including two proposed new chlorinated compounds reported for the first time. Unexpectedly, several known and regulated disinfection by-products (DBPs) were present in the ACE chlorinated solution. In addition, two of the six DBPs are proposed as N-DBPs. Time-course profiles of ACE and the identified by-products in tap water and wastewater samples were followed in order to simulate the actual disinfection process. Tap water did not significantly affect degradation, but wastewater did; it reacted with the ACE to produce several brominated-DBPs. A preliminary assessment of chlorinated mixtures by luminescence inhibition of Vibrio fischeri showed that these by-products were up to 1.8-fold more toxic than the parent compound. The generation of these DBPs, both regulated and not, representing enhanced toxicity, make chlorine disinfection a controversial treatment for ACE. Further efforts are urgently needed to both assess the consequences of current water treatment processes on ACE and to develop new processes that will safely treat ACE. Human health and the health of our aquatic ecosystems are at stake. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. The determination and fate of disinfection by-products from ozonation of polluted raw water

    International Nuclear Information System (INIS)

    Huang, W.-J.; Fang, G.-C.; Wang, C.-C.

    2005-01-01

    The major disinfection by-products (DBPs) resulting from ozone treatment of polluted surface water were investigated. By-products of either health concern or which may contribute to biological instability of treated drinking water were investigated. The major DBPs were analyzed in two fractions: carbonyl compounds and brominated organic compounds. The natural organic matter (NOM) was also isolated and fractionated from polluted water for subsequent ozonation and DBPs identification under conditions of typical drinking treatment. The main identified carbonyl compounds were low molecular weight carboxylic acids, benzoic compounds, aliphatic aldehydes and odorous aldehydes, respectively. Brominated organics were also found in ozonated water, including bromoform (CHBr 3 ), monobromoacetic acid (MBAA), dibromoacetic acid (DBAA), 2,4-dibromophenol (2,4-DBP) and dibromoacetonitrile (DBAN), respectively. It was also found that the characteristic of organic precursors have significant influences on brominated organic by-products formation. Humic acid demonstrated the highest CHBr 3 , DBAA and 2,4-DBP formations, whereas hydrophilic neutral produced less CHBr 3 and 2,4-DBP than the rest of the organic fractions but produced the highest amount of DBAN. In addition to the other target compounds, a total of 59 different organic compounds were detected by means of gas chromatograph/high-resolution electron-impact mass spectrometry (GC/EI-MS) detection and tentatively identified using mass spectral library searching, mainly aromatics, acids/esters, alcohols, aldehydes, phthalates and amines/amino acids were analyzed. The percentage of elimination or formation levels reached during ozonation is also discussed in this study

  10. Rational use of by-products in the processing of turkeys

    Directory of Open Access Journals (Sweden)

    L. V. Antipova

    2017-01-01

    Full Text Available A man's life, his health and work is impossible without full of food. According to the theory of balanced nutrition in the human diet should contain not only proteins, fats and carbohydrates in the required quantity, but also substances such as essential amino acids, vitamins, minerals in certain, beneficial to human proportions. In the organization of proper nutrition the primary role of the meat products. Turkey is the largest after the ostrich poultry are grown in Russia on an industrial scale. Undoubtedly, the leading positions on the market of poultry meat is chicken products, but in recent years Turkey meat is becoming increasingly popular. The processed by-products include liver, heart, gizzard, neck, feet, head, and corals. The highest mass fraction of Turkey offal is the liver, heart, gizzard. It was established experimentally that the output of the liver is of 1.23%, the output of the heart 0,45%, muscular stomach of 1.87%. The article presents data on the study of the chemical composition of the offal of turkeys, fractional composition of proteins, the assessment of the nutritional and biological value of byproducts. The objects of study are: offal (liver, heart, gizzard broiler turkeys received at home as a result of slaughter and primary processing. Despite the fact that Turkey sufficiently studied in terms of nutritional and biological value, however, information information on evaluation of properties of by-products is not enough. However, according to our estimates, they have considerable potential in the development of innovative products for food, feed and medical purposes on the basis of deep processing of all resources.

  11. Aqueous photodegradation of 4-tert-butylphenol: By-products, degradation pathway and theoretical calculation assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yanlin [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Shi, Jin; Chen, Hongche [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China); Zhao, Jianfu [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Dong, Wenbo, E-mail: wbdong@fudan.edu.cn [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China)

    2016-10-01

    4-tert-butylphenol (4-t-BP), an endocrine disrupting chemical, is widely distributed in natural bodies of water but is difficult to biodegrade. In this study, we focused on the transformation of 4-t-BP in photo-initiated degradation processes. The steady-state photolysis and laser flash photolysis (LFP) experiments were conducted in order to elucidate its degradation mechanism. Identification of products was performed using the GC–MS, LC-MS and theoretical calculation techniques. The oxidation pathway of 4-t-BP by hydroxyl radical (HO·) was also studied and H{sub 2}O{sub 2} was added to produce HO·. 4-tert-butylcatechol and 4-tert-butylphenol dimer were produced in 4-t-BP direct photolysis. 4-tert-butylcatechol and hydroquinone were produced by the oxidation of HO·. But the formation mechanism of 4-tert-butylcatechol in the two processes was different. The benzene ring was fractured in 4-t-BP oxidation process and 29% of TOC was degraded after 16 h irradiation. - Highlights: • Photodegradation of 4-t-BP, an endocrine disrupting chemical, has been investigated. • 3 stable byproducts were identified from photolysis and oxidation processes. • 5 transient by-products were concluded from LFP experiments. • The theoretical calculation was performed to confirm the byproducts. • 4-t-BP was degraded with increasing efficiency: 254 nm < H{sub 2}O{sub 2}/313 nm < H{sub 2}O{sub 2}/254 nm.

  12. Effects of Agricultural Byproducts in Ration on Productive and Reproductive Performance of Saidi Rams

    Directory of Open Access Journals (Sweden)

    G. A. Megahed

    2006-01-01

    Full Text Available The influence of selected agricultural byproducts supplementation to feed rations on the ram's body gain, reproductive performance, and subsequent fertility were investigated. Forty Saidi rams were divided into 4 groups (n = 10. Group 1 (control was fed 500 g/head/day concentrate feed mixtures (CFM plus wheat straw ad libitum. Groups 2, 3 and 4 were fed 500 g/head/day CFM plus corn cobs or sugar cane tops or sugar cane bagasse (these roughages were treated with 1% urea, respectively. Serum testosterone, glucose and total cholesterol levels were determined and semen evaluations were carried out every 15 days. Testicular size, scrotal circumference and body weight were recorded each month. At the end of the experiment, 12 rams were allowed to mount 114 healthy ewes to evaluate the pregnancy rate for each group. The results have shown that the body weight, daily body gain, testicular size and scrotal circumference increased (p p p < 0.01 as compared with group 1 (1.76 ± 0.09 ng/ml. Moreover, supplementation of treated agricultural byproducts had a significant improving effects on the semen quality. The semen volume increased, along with individual motility and live sperm percentages. Pregnancy rate in this study indicated that rams of groups 2, 3 and 4 yielded a higher pregnancy rate (83.33%, 86.67% and 81.48%, respectively than group 1 (74.07%. Agricultural byproducts such as corn cobs, sugar cane tops and sugar cane bagasse treated with 1% urea had a beneficial effect on the daily body gain and improved the reproductive performance and subsequent fertility of Saidi rams, compared to wheat straw.

  13. A Management State of POPs (Persistent Organic Pollutants) and the Measuring Direction - Centered By-Products

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jeong Gyu; Lee, Hee Seon [Korea Environment Institute, Seoul (Korea)

    2000-12-01

    The chemical materials, DDT and Dioxin, threaten the human health and take the high toxicity on ecosystem and a living thing. Because the chemical materials remain in environment for a long time due to a slow natural decomposition, they are biologically concentrated through the food cycle in ecosystem and have a characteristic to move a long distance. Owing to such toxicity and the characteristics of chemical materials, the world organization named them as Persistent Organic Pollutants (POPs) and has been actively progressing the international movement to strictly restrict them since the middle of 1990s. POPs regulation agreement, which is on progress centered in UNEP, is facing to the conclusion of the agreement of 2001 year. An agricultural chemical of organic chlorine among 12 POPs indicated by UNEP has been already prohibited in the domestic use and manufacturing or not registered, so the basic research, including search and monitoring if POPs remain or not, is required afterward. Because Dioxin, Puran, Hexachlorobenzene (HCB) among POPs, which are produced as by-products from all kinds of industrial processes, are not raw materials dislike other POPs, their use and manufacturing cannot be only prohibited by the related law but also they have few substitutes. Therefore, they should be applied by the different regulation from the existing toxic chemicals in order to manage the toxicity of the materials. However, the regulation on by-products among POPs is just in the beginning stage, and even the producing source has not been yet confirmed. This study suggests the necessity of the management on Dioxin, Puran, HCB, by-products among POPs, and presents the measuring direction with grasping the domestic and foreign trend of the regulation on the materials. 70 refs., 2 figs., 56 tabs.

  14. Utilization of tropical crop residues and agroindustrial by-products in animal nutrition. Constraints and perspectives

    International Nuclear Information System (INIS)

    Preston, T.R.; Parra, R.

    1983-01-01

    The importance of by-products and crop residues as animal feeds is increasing steadily. This is a consequence of the increasing demand for cereal grains as both human and animal (chiefly poultry) food, and the increasing demand for energy coupled with decreasing availability of fossil fuels. The effects of these two trends are that primary use of land for livestock production (usually grazing systems) will steadily diminish; at the same time, sources of biomass will increase in importance as renewable energy sources, and greater emphasis will be placed on draught animal power. Most by-products and crop residues are fibrous and therefore of only low to moderate nutritive value, or have special physical and chemical characteristics making them difficult to incorporate in conventional ''balanced'' rations. Such feed raw materials may need special processing and/or special forms of supplementation if they are to be used efficiently. It is hypothesized that industrial by-products and crop residues will be more efficiently utilized if they are incorporated in diversified and integrated production systems, i.e. (a) livestock production is integrated with production of cash crops both for food and fuel; (b) different livestock species are utilized in the same enterprise in a complementary way; (c) livestock feeding is based on crop residues (energy) supplemented with protein-rich forages and aquatic plants; and (d) animal wastes are recycled and used for food, fertilizer and fuel. This strategy is particularly suitable for the conditions in (i) tropical countries, whose climate favours high crop/biomass yields per unit area and ease of fermentation of organic wastes, and (ii) family farms, for which diversification means greater opportunity for self-sufficiency and increased possibilities for use of family resources. (author)

  15. Coal combustion by-products: A survey of use and disposal provisions

    International Nuclear Information System (INIS)

    Jagiella, D.M.

    1993-01-01

    Over 50% of all electricity in the United States is generated by the combustion of coal. Currently, coal fired power plants produce approximately 85 million to 100 million tons of coal combustion byproducts each year. The generation of these byproducts is expected to increase to 120 million tons by the year 2000, an increase of about 72% over 1984 levels. There are four basic types of byproducts produced by coal combustion - fly as, bottom ash, boiler slag, and flue gas desulfurization sludge (FGD), and are useful as engineering materials in a variety of applications. Fly ash represents nearly 75% of all ash wastes generated in the United States. Fly ash is a powder like substance with bonding properties. The properties of fly ash depend on the type of boiler utilized. The collected fly ash can be used to partially replace cement in concrete or the clay tit bricks or as part of nine reclamation. The technology for use of fly ash in cement concrete and road bases is well developed and has been practical for many years. The United States Environmental Protection Agency (USEPA) has recognized the applications of fly ash and promulgated a federal procurement guideline for the use of fly ash in cement and concrete. Although fly ash is the second most widely used waste product, much opportunity remains to expand the use of this product, In 1984, 80% of all fly ash was not recycled but rather disposed of, Ash particles that do not escape in flue gas as fly ash become bottom ash or boiler slag. Bottom ash and boiler slag settles on the bottom of the power plant's boiler. Bottom ash is a sand like substance which has some bonding capability. Depending on the type of boiler, tile bottom ash may be open-quotes dry bottom ashclose quotes or open-quotes wet bottom ashclose quotes, Wet bottom ash falls in a molten state into water

  16. Dry flue gas desulfurization byproducts as amendments for reclamation of acid mine spoil

    International Nuclear Information System (INIS)

    Dick, W.A.; Stehouwer, R.C.; Beeghly, J.H.; Bigham, J.M.; Lal, R.

    1994-01-01

    Development of beneficial reuses of highly alkaline, dry flue gas desulfurization (FGD) byproducts can impact the economics of adopting these FGD technologies for retrofit on existing powerplants. Greenhouse studies were conducted to evaluate the use of two dry FGD byproducts for reclamation of acid mine spoil (pH, 3.1 to 5.8). Treatment rates of FGD ranges from 0% to 32% by dry weight and most treatments also included 6% by dry weight of sewage sludge. Fescue (Festuca arundinacea Schreb.) was harvested monthly for a total of six harvests. Plant tissue composition and root growth were determined after the sixth harvest. Leachate analyses and pH determination of mixes were done at the beginning and end of the experiments. Both FGD byproducts were effective in raising the spoil pH and in improving fescue growth. At the highest FGD application rate, fescue growth decreased from the optimum due to high pH and reduced rooting volume caused by cementation reactions between the FGD and spoil. Trace elements, with the exception of B, were decreased in the fescue tissue when FGD was applied. Leachate pH, electrical conductivity, dissolved organic carbon, Ca, Mg, and S tended to increase with increased FGD application rate; Al, Fe, Mn, and Zn decreased. pH was the most important variable controlling the concentrations of these elements in the leachate. Concentrations of elements of environmental concern were near or below drinking water standard levels. These results indicate that FGD applied at rates equivalent to spoil neutralization needs can aid in the revegetation of acid spoil revegetation with little potential for introduction of toxic elements into the leachate water or into the food chain

  17. Nuclear links

    International Nuclear Information System (INIS)

    1981-01-01

    The subject is dealt with in sections: introduction; energy and the third world; world energy consumption 1978; oil -the energy dilemma; nuclear chains - introduction; uranium; Namibia; enrichment and reprocessing; countries with enrichment and reprocessing facilities; waste; conclusion; why take the nuclear option; third world countries with nuclear reactors; the arms connection; government spending and human resources 1977 (by countries); nuclear power - the final solution; the fascists; world bank; campaigns; community action in Plogoff; Australian labour movement; NUM against nuclear power; Scottish campaign; students against nuclear energy; anti-nuclear campaign; partizans; 3W1 disarmament and development; campaign ATOM; CANUC; 3W1; SANE. (U.K.)

  18. Recovering byproduct heavy minerals from sand and gravel, placer gold, and industrial mineral operations

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, J.M.; Martinez, G.M.; Wong, M.M.

    1979-01-01

    The Bureau of Mines, as part of an effort to maximize minerals and metals recovery from domestic resources, has investigated the feasibility of recovering heavy minerals as byproducts from sand and gravel, placer gold, and industrial mineral operations in northern California. Sand samples from about 50 locations were treated by gravity separation to yield heavy-mineral cocentrates (black sands). Mineral compositions of the concentrates were determined by chemical analysis and mineralogical examination. Individual zircon, ilmenite, magnetite, platinum-group metals, thoria, and silica products were prepared from heavy-mineral concentrates by selective separation using low- and high-intensity magnetic, high-tension, and flotation equipment.

  19. A brief review on activated carbon derived from agriculture by-product

    Science.gov (United States)

    Yahya, Mohd Adib; Mansor, Muhammad Humaidi; Zolkarnaini, Wan Amani Auji Wan; Rusli, Nurul Shahnim; Aminuddin, Anisah; Mohamad, Khalidah; Sabhan, Fatin Aina Mohamad; Atik, Arif Abdallah Aboubaker; Ozair, Lailatun Nazirah

    2018-06-01

    A brief review focusing on preparation of the activated carbon derived from agriculture by-products is presented. The physical and chemical activation of activated carbon were also reviewed. The effects of various parameters including types of activating agents, temperature, impregnation ratio, were also discussed. The applications of activated carbon from agricultural by products were briefly reviewed. It is provenly evident in this review, the relatively inexpensive and renewable resources of the agricultural waste were found to be effectively being converted into wealth materials.

  20. Chlorination and chloramination of aminophenols in aqueous solution: oxidant demand and by-product formation.

    Science.gov (United States)

    Mehrez, O Abou; Dossier-Berne, F; Legube, B

    2015-01-01

    Chlorination and monochloramination of aminophenols (AP) were carried out in aqueous solution at 25°C and at pH 8.5. Oxidant demand and disinfection by-product formation were determined in excess of oxidant. Experiments have shown that chlorine consumption of AP was 40-60% higher than monochloramine consumption. Compared with monochloramination, chlorination of AP formed more chloroform and haloacetic acids (HAA). Dichloroacetic acid was the major species of HAA. Chloroform and HAA represented, respectively, only 1-8% and 14-15% of adsorbable organic halides (AOX) by monochloramination but up to 29% and 39% of AOX by chlorination.

  1. Terminal separation plant for collecting petroleum and by-product gas

    Energy Technology Data Exchange (ETDEWEB)

    Marinin, N S; Shcherbina, V E; Burma, A I

    1966-06-08

    A separation plant at a transportation terminal, for collecting petroleum and by-product gas, consists of 1 or 2 vessels with gas separating device, automatic control devices, demulsifier distributors, a mixer for mixing hot water with the demulsified residue and raw crude oil stream, an apparatus for supplying oil-in-water emulsion under a water cushion, and 2 separating partitions which are located at the end of the vessel. In order to fully use the volume of the vessel, one partition does not touch the bottom, while the other does not touch the top of the tank.

  2. Fluosorbent injection by-products. Final report, January 1997 through December 1999

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Sid [Sorbent Technologies Corp., Twinsburg, OH (United States)

    2000-02-29

    Few, if any, economical alternatives exist for small coal-fired boilers that require a flue-gas desulfurization (FGD) system which does not generate wastes. A new duct-injection technology, called "Fluesorbent," was developed to help fill this gap. Fluesorbent was intentionally designed so that the saturated S02-sorbent materials can be used as beneficial soil amendments after they were used for FGD. A. Project Objective: The objective of this project was to demonstrate in the field that saturated Fluesorbent materials can be utilized beneficially on agricultural and grass lands. B. Project Results: The results of this project suggest that, indeed, saturated Fluesorbent has excellent potential as a commercial soil amendment for crops, such as alfalfa and soybeans, and for turf. Yields of alfalfa and turf were substantially increased in field testing on acidic soils by one-time applications of Fluesorbent FGD by-products. In the first two years of field testing, alfalfa yields on field plots with the FGD by-products were approximately 40% greater than on plots treated with an equivalent amount of agricultural lime. In a third, drought-influenced year, the gains were smaller. Turf grass growth was fully twice that of untreated plots and more than 10% greater than with ag-lime. A small farm trial with a modified version of the Fluesorbent by-product increased soybean yield by 25%. A small trial with corn, however, indicated no significant improvement. Even though the Fluesorbent contained fly ash, the alfalfa and turf grown in FGD-treated plots contained significantly lower levels of heavy metals than that grown in untreated or lime-treated plots. In a project greenhouse experiment, the fly ashes from five different coal boilers from around Ohio produced equivalent yields when mixed with Fluesorbent, indicating wide potential applicability of the new technology. The Fluesorbent materials were also found to be easy to extrude into pellets for use with mixed fertilizers

  3. Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

    Directory of Open Access Journals (Sweden)

    Camila Prado Cenciani de Souza

    2013-08-01

    Full Text Available Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor, which is citric acid 2 % (2 % CA (Brasil, 2007b, is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl (Brasil, 2007a. The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC, buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 % and commercial granular zinc (142 % and lower with brass slag I and II (67 and 27 %, respectively. The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no

  4. Biological waste by-production costs in forest management and possibilities for their reduction

    Directory of Open Access Journals (Sweden)

    Jiří Kadlec

    2004-01-01

    Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

  5. Testing of CFC replacement fluids for arc-induced toxic by-products

    Energy Technology Data Exchange (ETDEWEB)

    Cravey, W.R.; Goerz, D.A.; Hawley-Fedder, R.A.

    1993-06-01

    The authors have developed a unique test-stand for quantifying the generation of perfluoroisobutylene (PFIB) in chlorofluorocarbon (CFC) replacement fluids when they are subjected to high electrical stress/breakdown environments. PFIB is an extremely toxic gas with a threshold limit value of 10 ppbv as set by the American Conference of Governmental Industrial Hygienists. They have tested several new fluids from various manufacturers for their potential to generate PFIB. Their goal is to determine breakdown characteristics and quantify toxic by-products of these replacement fluids to determine a safe, usable alternative for present CFC`s.

  6. Feasibility study on improving SO/sub 2/ abatement economics through improvements in byproduct utilization. Final report. 2 Volumes

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-17

    This study was undertaken to assess the technical feasibility of improving SO/sub 2/ abatement economics through improvements in byproduct utilization, and to recommend the most appropriate strategy for fostering the development and commericalization of such technology. Existing byproduct technology was reviewed and the potential for new technology assessed. This was done by a literature review and a survey of individuals and organizations actively engaged in this area. The assessment is confined to technical aspects only. This phase of the study concludes that there is a wide range of abatement byproduct technology, at various stages of development, which if appropriately exploited, offers the potential of improving byproduct utility and value, and hence the economics of Canadian SO/sub 2/ abatement. The second phase of this study addresses the problem of the most effective strategy for ensuring the development and commercialization of appropriate byproduct technology. This is based on discussions with individuals and organizations involved in the field, and assessment of the motivation and potential effectiveness of alternative approaches within the context of a diverse Canadian industry, the technology status in Canada and the national need. Includes 51-page bibliography. 400 refs., 14 tabs.

  7. Effect of incorporation of corn byproducts on quality of baked and extruded products from wheat flour and semolina.

    Science.gov (United States)

    Sharma, Savita; Gupta, Jatinder Pal; Nagi, H P S; Kumar, Rakesh

    2012-10-01

    The effect of blending level (0, 5, 10, 15 and 20%) of corn bran, defatted germ and gluten with wheat flour on the physico-chemical properties (protein, crude fiber, phosphorus, iron and calcium), baking properties of bread, muffins and cookies, and extrusion properties of noodles and extruded snacks prepared from semolina were examined. Blending of wheat flour and corn byproducts significantly increased the protein, crude fiber, phosphorus, iron and calcium contents. Breads from gluten blends had higher loaf volume as compared to bran and germ breads. Among corn byproducts, gluten cookies were rated superior with respect to top grain. Muffins from germ blends and gluten blends had higher acceptability scores than the bran muffins. Blending of corn bran, defatted germ and gluten at 5 and 10% with wheat flour resulted in satisfactory bread, cookie, and muffin score. Quality of noodles was significantly influenced by addition of corn byproducts and their levels. Corn byproducts blending had significant influence on cooking time, however, gruel solid loss affected non-significantly in case of noodles. Expansion ratio and density of extruded snacks was affected non significantly by blending source and blending level. However, significant effect was observed on amperage, pressure, yield and overall acceptability of extruded snacks. Acceptable extruded products (noodles and extruded snacks) could be produced by blending corn byproducts with semolina upto 10% level.

  8. Pathway engineering of Enterobacter aerogenes to improve acetoin production by reducing by-products formation.

    Science.gov (United States)

    Jang, Ji-Woong; Jung, Hwi-Min; Im, Dae-Kyun; Jung, Moo-Young; Oh, Min-Kyu

    2017-11-01

    Enterobacter aerogenes was metabolically engineered for acetoin production. To remove the pathway enzymes that catalyzed the formation of by-products, the three genes encoding a lactate dehydrogenase (ldhA) and two 2,3-butanediol dehydrogenases (budC, and dhaD), respectively, were deleted from the genome. The acetoin production was higher under highly aerobic conditions. However, an extracellular glucose oxidative pathway in E. aerogenes was activated under the aerobic conditions, resulting in the accumulation of 2-ketogluconate. To decrease the accumulation of this by-product, the gene encoding a glucose dehydrogenase (gcd) was also deleted. The resulting strain did not produce 2-ketogluconate but produced significant amounts of acetoin, with concentration reaching 71.7g/L with 2.87g/L/h productivity in fed-batch fermentation. This result demonstrated the importance of blocking the glucose oxidative pathway under highly aerobic conditions for acetoin production using E. aerogenes. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Bioactive proteins and energy value of okara as a byproduct in hydrothermal processing of soy milk.

    Science.gov (United States)

    Stanojevic, Sladjana P; Barac, Miroljub B; Pesic, Mirjana B; Jankovic, Vanja S; Vucelic-Radovic, Biljana V

    2013-09-25

    The nutritional properties of raw okara obtained as a byproduct from six soybean varieties during hydrothermal cooking (HTC) of soy milk were assessed. The composition and residual activity (rTIA) of trypsin inhibitors (TIs), contents of lectin, proteins, fats, and carbohydrates, and energy values (EV) were correlated with the respective physicochemical properties of soybean and okara. Kunitz (KTI) and Bowman-Birk (BBI) TIs both comprised okara rTIA. TIs content was higher in okara (5.19-14.40%) than in soybean (3.10-12.17%), which additionally enriched okara by cysteine. Contents of KTI (r = 1.00;p < 0.05) and BBI (r = 0.89;p < 0.05) as well as BBI monomeric (r = 0.89;p < 0.05) and polymeric forms (r = 0.95;p < 0.05) in okara and in soybean were strongly correlated. Low urease index activity indicated that okara was heated adequately to inactivate antinutritional factors. The proximate composition of raw okara, advantageous rTIA, and a very low EV (2.74-3.78 kJ/g) qualify this byproduct for potential application in food preparation as a functional ingredient in dietary products.

  10. Liquid by-products from fish canning industry as sustainable sources of ω3 lipids.

    Science.gov (United States)

    Monteiro, Ana; Paquincha, Diogo; Martins, Florinda; Queirós, Rui P; Saraiva, Jorge A; Švarc-Gajić, Jaroslava; Nastić, Nataša; Delerue-Matos, Cristina; Carvalho, Ana P

    2018-08-01

    Fish canning industry generates large amounts of liquid wastes, which are discarded, after proper treatment to remove the organic load. However, alternative treatment processes may also be designed in order to target the recovery of valuable compounds; with this procedure, these wastewaters are converted into liquid by-products, becoming an additional source of revenue for the company. This study evaluated green and economically sustainable methodologies for the extraction of ω3 lipids from fish canning liquid by-products. Lipids were extracted by processes combining physical and chemical parameters (conventional and pressurized extraction processes), as well as chemical and biological parameters. Furthermore, LCA was applied to evaluate the environmental performance and costs indicators for each process. Results indicated that extraction with high hydrostatic pressure provides the highest amounts of ω3 polyunsaturated fatty acids (3331,5 mg L -1 effluent), apart from presenting the lowest environmental impact and costs. The studied procedures allow to obtain alternative, sustainable and traceable sources of ω3 lipids for further applications in food, pharmaceutical and cosmetic industries. Additionally, such approach contributes towards the organic depuration of canning liquid effluents, therefore reducing the overall waste treatment costs. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Transforming beef by-products into valuable ingredients: which spell/recipe to use?

    Directory of Open Access Journals (Sweden)

    Maeve Mary Henchion

    2016-11-01

    Full Text Available Satisfying the increasing global demand for protein results in challenges from a supply perspective. Increased use of animal proteins, through greater use of meat by-products, could form part of the solution, subject to consumer acceptance. This research investigates consumer evaluations of food products that incorporate ingredients derived from offals that have been produced through a range of food processing technologies. Using focus groups incorporating product stimuli representing various combinations of offals, processing and carrier products, the research finds that the physical state and perceived naturalness of the ingredients influences acceptance. It also highlights the impact of life experiences, linked to demographic characteristics, on interpretations and evaluations of products and processes. Ideational influences, i.e. knowledge of the nature or origin of the substance, are reasons for rejecting some concepts, with misalignment between nature of processing and the product resulting in rejection of others. Lack of perceived necessity also results in rejection. Alignment of ingredients with existing culinary practices and routines, communication of potential sensory or other benefits as well as naturalness are factors likely to promote acceptance, and generate repeat purchase, in some consumer segments. Trust in oversight that the products are safe is a prerequisite for acceptance in all cases. These findings have implications for pathways to increase sustainability of beef production and consumption through increased use of beef by-products.

  12. Chitooligomers preparation by chitosanase produced under solid state fermentation using shrimp by-products as substrate.

    Science.gov (United States)

    Nidheesh, T; Pal, Gaurav Kumar; Suresh, P V

    2015-05-05

    Solid state fermentation (SSF) conditions were statistically optimized for the production of chitosanase by Purpureocillium lilacinum CFRNT12 using shrimp by-products as substrate. Central composite design and response surface methodology were applied to evaluate the effect of variables and their optimization. Incubation temperature, incubation time, concentration of inoculum and yeast extract were found to influence the chitosanase production significantly. The R(2) value of 0.94 indicates the aptness of the model. The level of variables for optimal production of chitosanase was 32 ± 1°C temperature, 96 h incubation, 10.5% (w/v) inoculum, 1.05% (w/w) yeast extract and 65% (w/w) moisture content. The chitosanase production was found to increase from 2.34 ± 0.07 to 41.78 ± 0.73 units/g initial dry substrate after optimization. The crude chitosanase produced 4.43 mM of chitooligomers as exclusive end product from colloidal chitosan hydrolysis. These results indicate the potential of P. lilacinum CFRNT12 for the chitosanase production employing cost effective SSF using shrimp by-products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Assessment of the content of arsenic in solid by-products from coal combustion

    Directory of Open Access Journals (Sweden)

    Wierońska Faustyna

    2017-01-01

    Full Text Available The coal combustion processes constitute one of the major sources of heavy metals emission into the atmosphere. From the point of view of the reduction of the emission of heavy metals and the selection of the correct exhaust gas treatment system, it is important to monitor the amount of trace elements in the solid fuels and in the solid by-products from coal combustion. One of these highly toxic elements is arsenic. The average content of arsenic in Polish hard coals and lignites is 0 ÷ 40 mg/kg [1] and 5 ÷ 15 mg/kg [2], respectively. The world average content of arsenic in hard coals and lignites, is equal to 9.0 ± 0.8 and 7.4 ± 1.4 mg/kg [3], respectively. During coal combustion processes, a significant amount of arsenic enters the atmosphere through gases and fly ashes. The proportions in which those two forms of arsenic occur in exhaust gases depend on the conditions of combustion processes [4]. The aim of the research was to determine the content of arsenic in coal blends and by-products of their combustion (slag, fly ash, gypsum, filter cakes. The determination of the arsenic quantity was performed using the Atomic Absorption Spectrometry with the electrothermal atomization.

  14. Seasonal evaluation of disinfection by-products throughout two full-scale drinking water treatment plants.

    Science.gov (United States)

    Zhong, Xin; Cui, Chongwei; Yu, Shuili

    2017-07-01

    Carbonyl compounds can occur alpha-hydrogens or beta-diketones substitution reactions with disinfectants contributed to halogenated by-products formation. The objective of this research was to study the occurrence and fate of carbonyl compounds as ozonation by-products at two full-scale drinking water treatment plants (DWTPs) using different disinfectants for one year. The quality of the raw water used in both plants was varied according to the season. The higher carbonyl compounds concentrations were found in raw water in spring. Up to 15 (as the sum of both DWTPs) of the 24 carbonyl compounds selected for this work were found after disinfection. The dominant carbonyl compounds were formaldehyde, glyoxal, methyl-glyoxal, fumaric, benzoic, protocatechuic and 3-hydroxybenzoic acid at both DWTPs. In the following steps in each treatment plant, the concentration patterns of these carbonyl compounds differed depending on the type of disinfectant applied. Benzaldehyde was the only aromatic aldehyde detected after oxidation with ozone in spring. As compared with DWTP 1, five new carbonyl compounds were formed (crotonaldehyde, benzaldehyde, formic, oxalic and malonic acid) disinfection by ozone, and the levels of the carbonyl compounds increased. In addition, pre-ozonation (PO) and main ozonation (OZ) increased the levels of carbonyl compounds, however coagulation/flocculation (CF), sand filtration (SF) and granular activated carbon filtration (GAC) decreased the levels of carbonyl compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Influence of copper on the by-products of different oil-paper insulations

    International Nuclear Information System (INIS)

    Hao Jian; Liao Ruijin; Chen, George; Ma Chao

    2011-01-01

    Transformer failure caused by the corrosion of copper material in transformer attracts great attention of researchers and engineers. In this paper, Karamay No. 25 naphthenic mineral oil, Karamay No. 25 paraffinic mineral oil, Kraft paper and copper were used to compose four combinations of oil-paper insulation samples. The ageing by-products and dielectric properties of the four combinations of oil-paper insulation samples were compared after they were thermally aged at 130 deg. C. The influence of copper on the by-products and dielectric properties of different oil-paper insulations was obtained. The results show that copper can accelerate the ageing rate of insulation oils and reduce their AC breakdown voltage. The content of copper substance dissolved in insulating oil increases with ageing time at first and then decreases. The paper aged in the oil-paper insulation sample with copper has higher moisture content than the one without copper. Results of energy dispersive spectroscopy (EDS) in the scanning electron microscope (SEM) show that there is copper product deposited on the surface of insulation paper. The insulation oil and paper aged in the oil-paper insulation sample with copper have higher dielectric loss and conductivity than that without copper.

  16. Application of Óbidos “Ginginha” by-products in topical formulations: Apreliminary study

    Directory of Open Access Journals (Sweden)

    Elisabete Maurício

    2013-06-01

    Full Text Available In recent years many studies on cherries have revealed that they are rich sources of bioactive compounds, mainly due to their polyphenolic phytochemicals. In this work, by-products of the sour cherry (Prunus cerasus L. used in the Óbidos liquor from Portugal, were evaluated by determination of their total phenolic and anthocyanins contents. The mix samples (leaves and stems and pomace (skins with and without kernels were extracted by maceration using two different extraction methods with different solvents: ethanol and methanol. Overall, significant differences were observed between all the extracts in relation to the solvent used and anthocyanin and phenol contents. Stem and leaf extracts showed a polyphenol concentration higher than those from pomace. For all samples the total phenolic and anthocyanin contents were higher in methanol extracts than in ethanol extracts showing that methanol was the best solvent. For the pomace extracts the samples without kernels (skin samples gave the highest values for both parameters. The tested cherry stems and pomace could be regarded as a promising agro-industrial by-product, being a low-cost polyphenols source, with potential to be added in functional cosmetics formulations. Further studies will be conducted to address their potential use as an antioxidant ingredient.

  17. A Hybrid MCDM Approach for Strategic Project Portfolio Selection of Agro By-Products

    Directory of Open Access Journals (Sweden)

    Animesh Debnath

    2017-07-01

    Full Text Available Due to the increasing size of the population, society faces several challenges for sustainable and adequate agricultural production, quality, distribution, and food safety in the strategic project portfolio selection (SPPS. The initial adaptation of strategic portfolio management of genetically modified (GM Agro by-products (Ab-Ps is a huge challenge in terms of processing the agro food product supply-chain practices in an environmentally nonthreatening way. As a solution to the challenges, the socio-economic characteristics for SPPS of GM food purchasing scenarios are studied. Evaluation and selection of the GM agro portfolio management are the dynamic issues due to physical and immaterial criteria involving a hybrid multiple criteria decision making (MCDM approach, combining modified grey Decision-Making Trial and Evaluation Laboratory (DEMATEL, Multi-Attributive Border Approximation area Comparison (MABAC and sensitivity analysis. Evaluation criteria are grouped into social, differential and beneficial clusters, and the modified DEMATEL procedure is used to derive the criteria weights. The MABAC method is applied to rank the strategic project portfolios according to the aggregated preferences of decision makers (DMs. The usefulness of the proposed research framework is validated with a case study. The GM by-products are found to be the best portfolio. Moreover, this framework can unify the policies of agro technological improvement, corporate social responsibility (CSR and agro export promotion.

  18. Survey of radioactive effluent releases from byproduct material facilities. Technical report

    International Nuclear Information System (INIS)

    Cook, J.R.

    1981-08-01

    A survey of over 3,000 NRC byproduct material licensees was conducted in late 1980 to collect data on annual effluent releases of radioactivity. The survey was conducted through a questionnaire, which was sent to NRC licensees who handle radioactive material in unsealed form, i.e., research, medical, and industrial institutions. Principal findings from the survey analysis are as follows: More than 98% of the reported annual releases to air (484 to 490) yield calculated average concentrations at the boundary of the unrestricted area that were at 1% or less than the maximum permissible concentration (MPC) of Appendix B, Table II, Column 1 of 10 CFR 20. The largest reported annual release was estimated to yield a concentration that was approximately 12% of MPC, the 5 other releases ranged from 1 to 10% of MPC. All reported annual releases of liquid waste were within the limits specified by NRC with most facilities reporting annual releases of only a fraction of a curie. Based on the data provided by licensees and analyzed in this report, it appears that in general the environmental impacts from research, medical and industrial institutions and organizations licensed by the NRC to possess and use byproduct materials are minimal and correspond to a small fraction of that from natural background

  19. Use of Olive Oil Industrial By-Product for Pasta Enrichment.

    Science.gov (United States)

    Padalino, Lucia; D'Antuono, Isabella; Durante, Miriana; Conte, Amalia; Cardinali, Angela; Linsalata, Vito; Mita, Giovanni; Logrieco, Antonio F; Del Nobile, Matteo Alessandro

    2018-04-16

    During recent years food industries generally produce a large volume of wastes both solid and liquid, representing a disposal and potential environmental pollution problem. The goal of the study was to optimize, from both sensory and nutritional points of view, the formulation of durum wheat spaghetti enriched with an olive oil industrial by-product, indicated as olive paste. Three consecutive steps were carried out. In the first one, the olive paste was air-dried at low temperature, milled to record olive paste flour and properly analyzed for its biochemical composition. In the second step, the olive paste flour was added to the pasta dough at 10% and 15% ( w / w ). In the last step, different concentrations of transglutaminase were added to enriched pasta (10% olive paste) to further improve the quality. Sensory properties and nutritional content of enriched and control pasta were properly measured. Spaghetti with 10% olive paste flour and 0.6% transglutaminase were considered acceptable to the sensory panel test. Nutritional analyses showed that addition of 10% olive paste flour to pasta considerably increased content of flavonoids and total polyphenols. The proper addition of olive paste flour and transglutaminase for pasta enrichment could represent a starting point to valorize olive oil industrial by-products and produce new healthy food products.

  20. Bacterial Cellulose Production from Industrial Waste and by-Product Streams.

    Science.gov (United States)

    Tsouko, Erminda; Kourmentza, Constantina; Ladakis, Dimitrios; Kopsahelis, Nikolaos; Mandala, Ioanna; Papanikolaou, Seraphim; Paloukis, Fotis; Alves, Vitor; Koutinas, Apostolis

    2015-07-01

    The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen) 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L) and commercial sucrose (4.9 g/L) were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L) were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102-138 g · water/g · dry bacterial cellulose, viscosities of 4.7-9.3 dL/g, degree of polymerization of 1889.1-2672.8, stress at break of 72.3-139.5 MPa and Young's modulus of 0.97-1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients.

  1. Extrusion Processing of Raw Food Materials and by-products: A Review.

    Science.gov (United States)

    Offiah, Vivian; Kontogiorgos, Vassilis; Falade, Kolawole O

    2018-05-22

    Extrusion technology has rapidly transformed the food industry with its numerous advantages over other processing methods. It offers a platform for processing different products from various food groups by modifying minor or major ingredients and processing conditions. Although cereals occupy a large portion of the extruded foods market, several other types of raw materials have been used. Extrusion processing of various food groups, including cereals and pseudo cereals, roots and tubers, pulses and oilseeds, fruits and vegetables, and animal products, as well as structural and nutritional changes in these food matrices are reviewed. Value addition by extrusion to food processing wastes and by-products from fruits and vegetables, dairy, meat and seafood, cereals and residues from starch, syrup and alcohol production, and oilseed processing are also discussed. Extrusion presents an economical technology for incorporating food processing residues and by-products back into the food stream. In contemporary scenarios, rising demand for extruded products with functional ingredients, attributed to evolving lifestyles and preferences, have led to innovations in the form, texture, color and content of extruded products. Information presented in this review would be of importance to processors and researchers as they seek to enhance nutritional quality and delivery of extruded products.

  2. Study and identification of retention process of heavy metals by adsorption on agricultural byproducts

    Energy Technology Data Exchange (ETDEWEB)

    Bencheikh-Lehocine, M.; Arris, S.; Meniai, A.H. [Laboratoire de l' Ingenierie des Procedes d' Environnement, Universite Mentouri Constantine (Algeria); Morcellet, M.; Bacquet, M.; Martel, B. [Laboratoire de Chimie Macromoleculaire, UPRESA CNRS 8009 de l' Universite des Sciences et Technologies de Lille (USTL) (France); Mansri, A. [Laboratoire de Recherche sur les Macromolecules, Universite Abou Bakr Belkaid, Tlemcen (Algeria)

    2003-09-01

    This present study considers the adsorption of cations of heavy metals (zinc, cadmium, copper) which are frequently encountered in industrial wastewaters. The solid material used as adsorbent is nonactivated carbon obtained from a local cereal byproduct. In order to assess this material, adsorbents obtained from other agricultural byproducts, such as almond and peanuts shells, have also been tested. Adsorption isotherms have been determined and the influence of various parameters, such as the particle size, the solid-liquid contacting time, the pH of the solution, the initial concentration, the mixing velocity, the temperature and the ratio solid mass over solution volume, have been considered. The case of simultaneous presence of metallic cations in the solution has also been considered in order to examine their affinity towards the adsorbent. An attempt to determine whether the retention of the cations is a pure adsorption or an ion exchange has also been carried out. Retention yield values exceeding 90 % have been reached with an initial concentration of 10 mg/L, a temperature of 20 C, a particle size smaller than 0.1 mm, a mixing velocity of 600 rev/min, a ratio of 0.5 g adsorbent over 50 ml of solution and a pH varying between 3 and 6. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  3. Problems and possible remedies concerning NORM in by-Product gypsum produced by the phosphate industry

    International Nuclear Information System (INIS)

    Burnett, W.C.; Hull, C.D

    1996-01-01

    Large quantities (∼ 30 million tons/year) of phosphogypsum are produced as a by-product of fertilizer production in Florida. The sedimentary phosphate rock, used as the raw material for phosphoric acid production, is enriched in uranium and daughter products. Relatively high concentrations of some of these U-series daughters, particularly 226 Ra (av. = 910 Bq.Kg -1 ), prevent use of the by-product gypsum for construction or other purposes. The material is thus stockpiled on huge stacks which are unsightly and a potential threat to the surrounding air and especially groundwater resources. It is estimated that ∼ 10 9 tons of this material will be on Florida stacks by the turn of the century. We have been investigating the detailed radiochemistry of phosphogypsum in the hope that can understanding of how these radionuclides are fixed in the material may lead to cost-effective purification schemes. Our work has focused on the distribution of 226 Ra but has also included 210 Pb and 210 Po (av. = 860 Bq.Kg -1 ) which are also enriched in phosphogypsum. This paper summarizes the problems associated with this material and reviews its radiochemistry as elucidated by sequential extraction and other methodologies. We also present some possible alternatives to long-term storage as a solution to the phosphogypsum problem. (author)

  4. Models for predicting disinfection byproduct (DBP) formation in drinking waters: a chronological review.

    Science.gov (United States)

    Chowdhury, Shakhawat; Champagne, Pascale; McLellan, P James

    2009-07-01

    Disinfection for the supply of safe drinking water forms a variety of known and unknown byproducts through reactions between the disinfectants and natural organic matter. Chronic exposure to disinfection byproducts through the ingestion of drinking water, inhalation and dermal contact during regular indoor activities (e.g., showering, bathing, cooking) may pose cancer and non-cancer risks to human health. Since their discovery in drinking water in 1974, numerous studies have presented models to predict DBP formation in drinking water. To date, more than 48 scientific publications have reported 118 models to predict DBP formation in drinking waters. These models were developed through laboratory and field-scale experiments using raw, pretreated and synthetic waters. This paper aims to review DBP predictive models, analyze the model variables, assess the model advantages and limitations, and to determine their applicability to different water supply systems. The paper identifies the current challenges and future research needs to better control DBP formation. Finally, important directions for future research are recommended to protect human health and to follow the best management practices.

  5. Colour removal and carbonyl by-production in high dose ozonation for effluent polishing.

    Science.gov (United States)

    Mezzanotte, V; Fornaroli, R; Canobbio, S; Zoia, L; Orlandi, M

    2013-04-01

    Experimental tests have been conducted to investigate the efficiency and the by-product generation of high dose ozonation (10-60 mg O3 L(-1)) for complete colour removal from a treated effluent with an important component of textile dyeing wastewater. The effluent is discharged into an effluent-dominated stream where no dilution takes place, and, thus, the quality requirement for the effluents is particularly strict. 30, 60 and 90 min contact times were adopted. Colour was measured as absorbance at 426, 558 and 660 nm wavelengths. pH was monitored throughout the experiments. The experimental work showed that at 50 mg L(-1) colour removal was complete and at 60 mg O3 L(-1) the final aldehyde concentration ranged between 0.72 and 1.02 mg L(-1). Glyoxal and methylglyoxal concentrations were directly related to colour removal, whereas formaldehyde, acetaldehyde, acetone and acrolein were not. Thus, the extent of colour removal can be used to predict the increase in glyoxal and methylglyoxal concentrations. As colour removal can be assessed by a simple absorbance measurement, in contrast to the analysis of specific carbonyl compounds, which is much longer and complex, the possibility of using colour removal as an indicator for predicting the toxic potential of ozone by-products for textile effluents is of great value. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Toluene decomposition performance and NOx by-product formation during a DBD-catalyst process.

    Science.gov (United States)

    Guo, Yufang; Liao, Xiaobin; Fu, Mingli; Huang, Haibao; Ye, Daiqi

    2015-02-01

    Characteristics of toluene decomposition and formation of nitrogen oxide (NOx) by-products were investigated in a dielectric barrier discharge (DBD) reactor with/without catalyst at room temperature and atmospheric pressure. Four kinds of metal oxides, i.e., manganese oxide (MnOx), iron oxide (FeOx), cobalt oxide (CoOx) and copper oxide (CuO), supported on Al2O3/nickel foam, were used as catalysts. It was found that introducing catalysts could improve toluene removal efficiency, promote decomposition of by-product ozone and enhance CO2 selectivity. In addition, NOx was suppressed with the decrease of specific energy density (SED) and the increase of humidity, gas flow rate and toluene concentration, or catalyst introduction. Among the four kinds of catalysts, the CuO catalyst showed the best performance in NOx suppression. The MnOx catalyst exhibited the lowest concentration of O3 and highest CO2 selectivity but the highest concentration of NOx. A possible pathway for NOx production in DBD was discussed. The contributions of oxygen active species and hydroxyl radicals are dominant in NOx suppression. Copyright © 2014. Published by Elsevier B.V.

  7. Valorization of Proteins from Co- and By-Products from the Fish and Meat Industry.

    Science.gov (United States)

    Aspevik, Tone; Oterhals, Åge; Rønning, Sissel Beate; Altintzoglou, Themistoklis; Wubshet, Sileshi Gizachew; Gildberg, Asbjørn; Afseth, Nils Kristian; Whitaker, Ragnhild Dragøy; Lindberg, Diana

    2017-06-01

    Large volumes of protein-rich residual raw materials, such as heads, bones, carcasses, blood, skin, viscera, hooves and feathers, are created as a result of processing of animals from fisheries, aquaculture, livestock and poultry sectors. These residuals contain proteins and other essential nutrients with potentially bioactive properties, eligible for recycling and upgrading for higher-value products, e.g. for human, pet food and feed purposes. Here, we aim to cover all the important aspects of achieving optimal utilization of proteins in such residual raw materials, identifying those eligible for human consumption as co-products and for feed applications as by-products. Strict legislation regulates the utilization of various animal-based co- and by-products, representing a major hurdle if not addressed properly. Thorough understanding and optimization of all parts of the production chain, including conservation and processing, are important prerequisites for successful upgrading and industrial implementation of such products. This review includes industrially applied technologies such as freezing/cooling, acid preservation, salting, rendering and protein hydrolysis. In this regard, it is important to achieve stable production and quality through all the steps in the manufacturing chain, preferably supported by at- or online quality control points in the actual processing step. If aiming for the human market, knowledge of consumer trends and awareness are important for production and successful introduction of new products and ingredients.

  8. Production of hydrogen from by-products of food industries by rhodospirillaceae

    Energy Technology Data Exchange (ETDEWEB)

    Reh, U.

    1983-11-01

    The decomposition of organic substances from food-by-products as whey, beet sugar molasses, cane-sugar-molasses and potato-water by the Rhodospirillaceae Rp. capsulata, Rp. acidophila, Rm. vannielii, Rs. rubrum, and Rs. tenue to hydrogen and carbon dioxide were tested. In a pre-cultivation Lactobacillus bulgaricus converted the sugars of the by-products into lactic acid, which is easier in handling. Rs. rubrum was superior in producing hydrogen from this nutrient. It released from whey up to 56% of the substrate hydrogen, from beet sugar molasses 42%, from cane-sugar-molasses 89% and from potato-water 19%. Out-door-researches were made to evaluate the decrease of hydrogen yield under the influence of weather as well as day and night periods compared to the homogeneous conditions of the laboratory. From 200 m/sup 3/ whey, the daily output of a dairy, 4000 m/sup 3/ hydrogen corresponding to an energy equivalent of 1000 l fuel oil could be produced. To achieve this, 130 000 m/sup 2/ have to be covered with batch fermenters. These results show, that there is nearly no hope to decompose food by-products by Rhodospirillaceae in large scale technology, unless a new processing technology using a flow-fermenter and raising the hydrogen production significantly will be found.

  9. Study for effective use of fishery byproducts as alternative earth materials focusing on their water retention

    International Nuclear Information System (INIS)

    Kobayashi, Kaoru; Nakafusa, Satoru; Nishimura, Tomoyoshi; Morii, Toshihiro

    2011-01-01

    Capillary barriers have been known and widely used in geoenvironmental engineering applications as soil cover for typical rainfall infiltration control systems. The capillary barrier is consisting of a fine-grained soil layer placed over a coarse-grained soil layer. The applications of capillary barriers are significantly useful to preventing infiltration into waste materials. Natural gravel or coarse-grained soil material had a exhaustion problems in practices. On the contrary, shells a kind of fishery byproduct, are classified as industrial waste in laws concerning waste disposal. The majority of shells are piled and left near the fishing port without controlling system. Therefore, it is proposed that the crushed shells are available to layer material instead of natural coarse-grained soil. This solution is considered to great contribute developing of recycle for fisher byproduct shells and is related to environment conservation. Water retention for crushed shells, however, never been fully investigate. This study focuses on the ability of crushed shells to capillary barrier applications. The soil-water characteristic curve for crushed shells with three different grain size distributions was determined using the modified SWCC testing apparatus. Also, it is observed using a conventional model equipment that the getting of fine sand into crushed shell layer is prevented. (author)

  10. Natural Bioactive Compounds from Winery By-Products as Health Promoters: A Review

    Directory of Open Access Journals (Sweden)

    Ana Teixeira

    2014-09-01

    Full Text Available The relevance of food composition for human health has increased consumers’ interest in the consumption of fruits and vegetables, as well as foods enriched in bioactive compounds and nutraceuticals. This fact has led to a growing attention of suppliers on reuse of agro-industrial wastes rich in healthy plant ingredients. On this matter, grape has been pointed out as a rich source of bioactive compounds. Currently, up to 210 million tons of grapes (Vitis vinifera L. are produced annually, being the 15% of the produced grapes addressed to the wine-making industry. This socio-economic activity generates a large amount of solid waste (up to 30%, w/w of the material used. Winery wastes include biodegradable solids namely stems, skins, and seeds. Bioactive compounds from winery by-products have disclosed interesting health promoting activities both in vitro and in vivo. This is a comprehensive review on the phytochemicals present in winery by-products, extraction techniques, industrial uses, and biological activities demonstrated by their bioactive compounds concerning potential for human health.

  11. Disinfection by-products and extractable organic compounds in South African tap water

    Directory of Open Access Journals (Sweden)

    Carien Nothnagel

    2008-04-01

    Full Text Available An important step in urban purification of drinking water is disinfection by e.g. chlorination where potential pathogenic micro-organisms in the water supply are killed. The presence of organic material in natural water leads to the formation of organic by- products during disinfection. Over 500 of these disinfection by-products (DBPs have been identified and many more are estimated to form during the disinfection step. Several DBPs such as trihalomethanes (THMs, which is carcinogenic, poses serious health risks to the community. There is very few quantitative data available which realizes the actual levels of these compounds present in drinking water. The levels of four THMs present in drinking water were measured. It included chloroform, bromodichloromethane, chlorodibromomethane and bromoform. Although microbiological parameters are considered to get more attention than disinfection by-products, the measurement of the levels of these compounds in South-African drinking water is essential together with establishing minimum acceptable concentration levels. The target range for total trihalomethanes (TTHMs established by the US EPA at the end of 2003 is 0-0.08ug/mL. The aim of this paper is to create an awareness of the problem as well as presenting preliminary results obtained with the method of analysis. Preliminary results indicate that urgent attention must be given to the regulation and monitoring of DBPs in South African drinking water.

  12. Hazard assessment of nitrosamine and nitramine by-products of amine-based CCS: alternative approaches.

    Science.gov (United States)

    Buist, H E; Devito, S; Goldbohm, R A; Stierum, R H; Venhorst, J; Kroese, E D

    2015-04-01

    Carbon capture and storage (CCS) technologies are considered vital and economic elements for achieving global CO2 reduction targets, and is currently introduced worldwide (for more information on CCS, consult for example the websites of the International Energy Agency (http://www.iea.org/topics/ccs/) and the Global CCS Institute (http://www.globalccsinstitute.com/)). One prominent CCS technology, the amine-based post-combustion process, may generate nitrosamines and their related nitramines as by-products, the former well known for their potential mutagenic and carcinogenic properties. In order to efficiently assess the carcinogenic potency of any of these by-products this paper reviews and discusses novel prediction approaches consuming less time, money and animals than the traditionally applied 2-year rodent assay. For this, available animal carcinogenicity studies with N-nitroso compounds and nitramines have been used to derive carcinogenic potency values, that were subsequently used to assess the predictive performance of alternative prediction approaches for these chemicals. Promising cancer prediction models are the QSARs developed by the Helguera group, in vitro transformation assays, and the in vivo initiation-promotion, and transgenic animal assays. All these models, however, have not been adequately explored for this purpose, as the number of N-nitroso compounds investigated is yet too limited, and therefore further testing with relevant N-nitroso compounds is needed. Copyright © 2015. Published by Elsevier Inc.

  13. Utilisation of Food and Woodworking Production By-products by Composting

    Directory of Open Access Journals (Sweden)

    Uldis Viesturs

    2004-10-01

    Full Text Available The purpose of the study was to develop laboratory-scale technologies for composting milk/cheese whey, spent liquor, brewery yeast, fish processing by-products, etc., adding these by-products and special microorganism associations to the basic material - sawdust, bark, etc., also arranging different experimental composting sites. Two Trichoderma strains (Tr. lignorum, Tr. viride and a nitrification association for regulating the circulation of nitrogen-ammonification and nitrification processes were applied. Monitoring of the composting quality was realised by microbiological and chemical analyses, and biotests for compost quality (toxicity assessment. For purifying the polluted air from the composting facilities, the biofiltration technique was realised in a modified SSF system. Biodegradation of ammonia was investigated in a two-stage system with the inert packing material - dolomite broken bricks, and hemoautotrophic microorganisms: DN-1 (Pseudomonas sp., DN-2 (Nitrosomonas sp., DN-3 (Nitrobacter sp. and DN-13 (Sarcina sp.. For hydrogen sulphide biodegradation, Thiobacillus thioparus-3 was immobilised on glass bricks as the carrier material. Biodegradation efficiency of hydrogen sulphide was 87%. Biodegradation of ammonia in the first step in the two-stage system reached 77%, degradation of the gas remaining in the second step was 75%. Compost's quality was similar to black soil - brown-coloured, with good soil odour and without toxic compounds.

  14. Research of Environmental and Economic Interactions of Coke And By-Product Process

    Science.gov (United States)

    Mikhailov, Vladimir; Kiseleva, Tamara; Bugrova, Svetlana; Muromtseva, Alina; Mikhailova, Yana

    2017-11-01

    The issues of showing relations between environmental and economic indicators (further - environmental and economic interactions) of coke and by-product process are considered in the article. The purpose of the study is to reveal the regularities of the functioning of the local environmental and economic system on the basis of revealed spectrum of environmental and economic interactions. A simplified scheme of the environmental and economic system "coke and by-product process - the environment" was developed. The forms of the investigated environmental-economic interactions were visualized and the selective interpretation of the tightness of the established connection was made. The main result of the work is modeling system of environmental and economic interactions that allows increasing the efficiency of local ecological and economic system management and optimizing the "interests" of an industrial enterprise - the source of negative impact on the environment. The results of the survey can be recommended to government authorities and industrial enterprises with a wide range of negative impact forms to support the adoption of effective management decisions aimed at sustainable environmental and economic development of the region or individual municipalities.

  15. Characterization and cardioprotective activity of anthocyanins from Nitraria tangutorum Bobr. by-products.

    Science.gov (United States)

    Zhang, Ming; Ma, Jianbin; Bi, Hongtao; Song, Jiayin; Yang, Hongxia; Xia, Zhenghua; Du, Yuzhi; Gao, Tingting; Wei, Lixin

    2017-08-01

    The Nitraria tangutorum Bobr. fruit is an indigenous berry of the shrub belonging to the Zygophyllaceae family which grows at an altitude of over 3000 m in the Tibetan Plateau, and has been used as a native medicinal food for treating weakness of the spleen, stomach syndrome, dyspepsia, neurasthenia, dizziness, etc. for thousands of years. Nowadays, N. tangutorum industrial juice by-products generated from health food production can be a potential low cost source of some unique bioactive ingredients. In a prior study, we established a simultaneous microwave/ultrasonic assisted enzymatic extraction method for extracting antioxidant ingredients from the industrial by-products of N. tangutorum juice. In this study, these ingredients were selectively fractionated by cation-exchange resin chromatography to obtain an anthocyanin fraction namely NJBAE. NJBAE was found to be composed of 16 anthocyanins derived from six anthocyanidins by HPLC-ESI-MS, and has an appreciable cardioprotective effect on doxorubicin-induced injured H9c2 cardiomyocytes. The cardioprotective mechanism research showed that NJBAE could directly scavenge ROS, restrict further generation of ROS, promote the activity of key antioxidase, enhance glutathione redox cycling, then affect the apoptotic signaling changes in a positive way, and finally mediate caspase-dependent cell death pathways. Therefore, NJBAE has great potential to be used for preventing and treating cardiovascular disease in the food, pharmaceutical and other emerging industries.

  16. PIXE characterization of by-products resulting from the zinc recycling of industrial cemented carbides

    International Nuclear Information System (INIS)

    Freemantle, C.S.; Sacks, N.; Topic, M.; Pineda-Vargas, C.A.

    2015-01-01

    By-product materials of the widely used zinc recycling process of cemented carbides have been studied. Scanning electron microscopy and micro-PIXE techniques have identified elemental concentrations, distributions and purity of by-product materials from an industrial zinc recycling plant. Cobalt surface enrichment, lamellar microstructures of varying composition, including alternating tungsten carbide (WC) grains and globular cobalt, and regions of excess zinc contamination were found in materials with incomplete zinc penetration. Liquid Co–Zn formation occurred above 72 wt.% Zn at the furnace temperature of 930 °C, and was extracted towards the surface of poorly zinc infiltrated material, primarily by the vacuum used for zinc distillation. Surface enrichment was not observed in material that was zinc infiltrated to the sample center, which was more friable and exhibited more homogeneous porosity and elemental concentrations. The result of incomplete zinc infiltration was an enriched surface zone of up to 60 wt.% Co, compared to an original sample composition of ∼10–15 wt.% Co. The impact on resulting powders could be higher or inhomogeneous cobalt content, as well as unacceptably high zinc concentrations. PIXE has proven it can be a powerful technique for solving industrial problems in the cemented carbide cutting tool industry, by identifying trace elements and their locations (such as Zn to 0.1 wt.% accuracy), as well as the distribution of major elements within WC–Co materials.

  17. Oxidation of diclofenac by aqueous chlorine dioxide: identification of major disinfection byproducts and toxicity evaluation.

    Science.gov (United States)

    Wang, Yingling; Liu, Haijin; Liu, Guoguang; Xie, Youhai

    2014-03-01

    Diclofenac (DCF), a synthetic non-steroidal anti-inflammatory drug, is one of the most frequently detected pharmaceuticals in the aquatic environment. In this work, the mechanism and toxicity of DCF degradation by ClO2 under simulated water disinfection conditions were investigated. Experimental results indicate that rapid and significant oxidation of DCF occurred within the first few minutes; however, its mineralization process was longer than its degradation process. UPLC-MS and (1)H NMR spectroscopy were performed to identify major disinfection byproducts that were generated in three tentative degradation routes. The two main routes were based on initial decarboxylation of DCF on the aliphatic chain and hydroxylation of the phenylacetic acid moiety at the C-4 position. Subsequently, the formed aldehyde intermediates were the starting point for further multistep degradation involving decarboxylation, hydroxylation, and oxidation reactions of CN bond cleavage. The third route was based on transient preservation of chlorinated derivatives resulting from electrophilic attack by chlorine on the aromatic ring, which similarly underwent CN bond cleavage. Microtox bioassay was employed to evaluate the cytotoxicity of solutions treated by ClO2. The formation of more toxic mid-byproducts during the ClO2 disinfection process poses a potential risk to consumers. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. PIXE characterization of by-products resulting from the zinc recycling of industrial cemented carbides

    Energy Technology Data Exchange (ETDEWEB)

    Freemantle, C.S. [School of Chemical & Metallurgical Engineering and DST-NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P/Bag 3, Wits 2050 (South Africa); Pilot Tools (Pty) (Ltd), P.O. Box 27420, Benrose 2011 (South Africa); Sacks, N. [School of Chemical & Metallurgical Engineering and DST-NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P/Bag 3, Wits 2050 (South Africa); Topic, M. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); Pineda-Vargas, C.A. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); Faculty of Health & Wellness Sciences, CPUT, Bellville (South Africa)

    2015-11-15

    By-product materials of the widely used zinc recycling process of cemented carbides have been studied. Scanning electron microscopy and micro-PIXE techniques have identified elemental concentrations, distributions and purity of by-product materials from an industrial zinc recycling plant. Cobalt surface enrichment, lamellar microstructures of varying composition, including alternating tungsten carbide (WC) grains and globular cobalt, and regions of excess zinc contamination were found in materials with incomplete zinc penetration. Liquid Co–Zn formation occurred above 72 wt.% Zn at the furnace temperature of 930 °C, and was extracted towards the surface of poorly zinc infiltrated material, primarily by the vacuum used for zinc distillation. Surface enrichment was not observed in material that was zinc infiltrated to the sample center, which was more friable and exhibited more homogeneous porosity and elemental concentrations. The result of incomplete zinc infiltration was an enriched surface zone of up to 60 wt.% Co, compared to an original sample composition of ∼10–15 wt.% Co. The impact on resulting powders could be higher or inhomogeneous cobalt content, as well as unacceptably high zinc concentrations. PIXE has proven it can be a powerful technique for solving industrial problems in the cemented carbide cutting tool industry, by identifying trace elements and their locations (such as Zn to 0.1 wt.% accuracy), as well as the distribution of major elements within WC–Co materials.

  19. Formation of Haloacetonitriles, Haloacetamides, and Nitrogenous Heterocyclic Byproducts by Chloramination of Phenolic Compounds.

    Science.gov (United States)

    Nihemaiti, Maolida; Le Roux, Julien; Hoppe-Jones, Christiane; Reckhow, David A; Croué, Jean-Philippe

    2017-01-03

    The potential formation of nitrogenous disinfection byproducts (N-DBPs) was investigated from the chloramination of nitrogenous and non-nitrogenous aromatic compounds. All molecules led to the formation of known N-DBPs (e.g., dichloroacetonitrile, dichloroacetamide) with various production yields. Resorcinol, a major precursor of chloroform, also formed di/trichloroacetonitrile, di/trichloroacetamide, and haloacetic acids, indicating that it is a precursor of both N-DBPs and carbonaceous DBPs (C-DBPs) upon chloramination. More detailed experiments were conducted on resorcinol to understand N-DBPs formation mechanisms and to identify reaction intermediates. Based on the accurate mass from high resolution Quadrupole Time-of-Flight GC-MS (GC-QTOF) and fragmentation patterns from electronic impact and positive chemical ionization modes, several products were tentatively identified as nitrogenous heterocyclic compounds (e.g., 3-chloro-5-hydroxy-1H-pyrrole-2-one with dichloromethyl group, 3-chloro-2,5-pyrroledione). These products were structurally similar to the heterocyclic compounds formed during chlorination, such as the highly mutagenic MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone) or halogenated pyrroles. To our knowledge, this is the first time that the formation of halogenated nitrogenous heterocyclic compounds is reported from chloramination process. The formation of these nitrogenous byproducts during chloramination might be of concern considering their potential toxicity.

  20. Remediation of Ni(2+)-contaminated water using iron powder and steel manufacturing byproducts.

    Science.gov (United States)

    Jin, Jian; Zhao, Wei-Rong; Xu, Xin-Hua; Hao, Zhi-Wei; Liu, Yong; He, Ping; Zhou, Mi

    2006-01-01

    Steel manufacturing byproducts and commercial iron powders were tested in the treatment of Ni(2+)-contaminated water. Ni2+ is a priority pollutant of some soils and groundwater. The use of zero-valent iron, which can reduce Ni2+ to its neural form appears to be an alternative approach for the remediation of Ni(2+)-contaminated sites. Our experimental data show that the removal efficiencies of Ni2+ were 95.15% and 94.68% at a metal to solution ratio of 20 g/L for commercial iron powders and the steel manufacturing byproducts in 60 min at room temperature, respectively. The removal efficiency reached 98.20% when the metal to solution ratio was 40 g/L for commercial iron powders. Furthermore, we found that the removal efficiency was also largely affected by other factors such as the pHs of the treated water, the length of time for the metal to be in contact with the Ni(2+)-contaminated water, initial concentrations of metal solutions, particle sizes and the amount of iron powders. Surprisingly, the reaction temperature appeared to have little effect on the removal efficiency. Our study opens the way to further optimize the reaction conditions of in situ remediation of Ni2+ or other heavy metals on contaminated sites.

  1. Arsenic removal using steel manufacturing byproducts as permeable reactive materials in mine tailing containment systems.

    Science.gov (United States)

    Ahn, Joo Sung; Chon, Chul-Min; Moon, Hi-Soo; Kim, Kyoung-Woong

    2003-05-01

    Steel manufacturing byproducts were tested as a means of treating mine tailing leachate with a high As concentration. Byproduct materials can be placed in situ as permeable reactive barriers to control the subsurface release of leachate from tailing containment systems. The tested materials had various compositions of elemental Fe, Fe oxides, Ca-Fe oxides and Ca hydroxides typical of different steel manufacturing processes. Among these materials, evaporation cooler dust (ECD), oxygen gas sludge (OGS), basic oxygen furnace slag (BOFS) and to a lesser degree, electrostatic precipitator dust (EPD) effectively removed both As(V) and As(III) during batch experiments. ECD, OGS and BOFS reduced As concentrations to <0.5mg/l from 25mg/l As(V) or As(III) solution in 72 h, exhibiting higher removal capacities than zero-valent iron. High Ca concentrations and alkaline conditions (pH ca. 12) provided by the dissolution of Ca hydroxides may promote the formation of stable, sparingly soluble Ca-As compounds. When initial pH conditions were adjusted to 4, As reduction was enhanced, probably by adsorption onto iron oxides. The elution rate of retained As from OGS and ECD decreased with treatment time, and increasing the residence time in a permeable barrier strategy would be beneficial for the immobilization of As. When applied to real tailing leachate, ECD was found to be the most efficient barrier material to increase pH and to remove As and dissolved metals.

  2. Utilisation of biomass gasification by-products for onsite energy production.

    Science.gov (United States)

    Vakalis, S; Sotiropoulos, A; Moustakas, K; Malamis, D; Baratieri, M

    2016-06-01

    Small scale biomass gasification is a sector with growth and increasing applications owing to the environmental goals of the European Union and the incentivised policies of most European countries. This study addresses two aspects, which are at the centre of attention concerning the operation and development of small scale gasifiers; reuse of waste and increase of energy efficiency. Several authors have denoted that the low electrical efficiency of these systems is the main barrier for further commercial development. In addition, gasification has several by-products that have no further use and are discarded as waste. In the framework of this manuscript, a secondary reactor is introduced and modelled. The main operating principle is the utilisation of char and flue gases for further energy production. These by-products are reformed into secondary producer gas by means of a secondary reactor. In addition, a set of heat exchangers capture the waste heat and optimise the process. This case study is modelled in a MATLAB-Cantera environment. The model is non-stoichiometric and applies the Gibbs minimisation principle. The simulations show that some of the thermal energy is depleted during the process owing to the preheating of flue gases. Nonetheless, the addition of a secondary reactor results in an increase of the electrical power production efficiency and the combined heat and power (CHP) efficiency. © The Author(s) 2016.

  3. Succinic Acid as a Byproduct in a Corn-based Ethanol Biorefinery

    Energy Technology Data Exchange (ETDEWEB)

    MBI International

    2007-12-31

    MBI endeavored to develop a process for succinic acid production suitable for integration into a corn-based ethanol biorefinery. The project investigated the fermentative production of succinic acid using byproducts of corn mill operations. The fermentation process was attuned to include raw starch, endosperm, as the sugar source. A clean-not-sterile process was established to treat the endosperm and release the monomeric sugars. We developed the fermentation process to utilize a byproduct of corn ethanol fermentations, thin stillage, as the source of complex nitrogen and vitamin components needed to support succinic acid production in A. succinogenes. Further supplementations were eliminated without lowering titers and yields and a productivity above 0.6 g l-1 hr-1was achieved. Strain development was accomplished through generation of a recombinant strain that increased yields of succinic acid production. Isolation of additional strains with improved features was also pursued and frozen stocks were prepared from enriched, characterized cultures. Two recovery processes were evaluated at pilot scale and data obtained was incorporated into our economic analyses.

  4. Immunostimulatory and anti-metastatic activity of polysaccharides isolated from byproducts of the corn starch industry.

    Science.gov (United States)

    Lee, Sue Jung; Lee, Ho Sung; Kim, Sun Young; Shin, Kwang-Soon

    2018-02-01

    Corn steep liquor (CSL) is a major by-product of the corn steeping process that is utilized in the wet milling industry. To develop new physiologically active polysaccharides from CSL, polysaccharides were isolated and their innate immunostimulatory and anti-metastatic activities were investigated. Corn byproduct polysaccharides (CBP) were preferentially isolated from CSL and further separated into supernatant (CBP1S) and precipitate (CBP1P) fractions. The anti-complementary activity of CBP1S was more potent than CBP1P and CBP. In addition, CBP1S enhanced production of macrophage-stimulating cytokines (e.g., IL-6 and IL-12) and natural killer (NK) cell-activating substances (e.g., granzyme and interferon-γ). Further, CBP1S significantly inhibited lung metastasis at a dose of 1000μg per mouse in an experimental lung metastasis model. These results suggest that CBP1S seems to promote the inhibition of lung metastasis through a mechanism leading to stimulation of the innate immune system, and CBP1S could be used as immunostimulating agents and for industrial applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Effect of chlorination by-products on the quantitation of microcystins in finished drinking water.

    Science.gov (United States)

    Rosenblum, Laura; Zaffiro, Alan; Adams, William A; Wendelken, Steven C

    2017-11-01

    Microcystins are toxic peptides that can be produced by cyanobacteria in harmful algal blooms (HABs). Various analytical techniques have been developed to quantify microcystins in drinking water, including liquid chromatography tandem mass spectrometry (LC/MS/MS), enzyme linked immunosorbent assay (ELISA), and oxidative cleavage to produce 2-methyl-3-methoxy-4-phenylbutyric acid (MMPB) with detection by LC/MS/MS, the "MMPB method". Both the ELISA and MMPB methods quantify microcystins by detecting a portion of the molecule common to most microcystins. However, there is little research evaluating the effect of microcystin chlorination by-products potentially produced during drinking water treatment on analytical results. To evaluate this potential, chlorinated drinking water samples were fortified with various microcystin congeners in bench-scale studies. The samples were allowed to react, followed by a comparison of microcystin concentrations measured using the three methods. The congener-specific LC/MS/MS method selectively quantified microcystins and was not affected by the presence of chlorination by-products. The ELISA results were similar to those obtained by LC/MS/MS for most microcystin congeners, but results deviated for a particular microcystin containing a variable amino acid susceptible to oxidation. The concentrations measured by the MMPB method were at least five-fold higher than the concentrations of microcystin measured by the other methods and demonstrate that detection of MMPB does not necessarily correlate to intact microcystin toxins in finished drinking water. Published by Elsevier Ltd.

  6. Antioxidant potential of chestnut (Castanea sativa L.) and almond (Prunus dulcis L.) by-products.

    Science.gov (United States)

    Barreira, J C M; Ferreira, I C F R; Oliveira, M B P P; Pereira, J A

    2010-06-01

    The antioxidant properties of almond green husks (Cvs. Duro Italiano, Ferraduel, Ferranhês, Ferrastar and Orelha de Mula), chestnut skins and chestnut leaves (Cvs. Aveleira, Boa Ventura, Judia and Longal) were evaluated through several chemical and biochemical assays in order to provide a novel strategy to stimulate the application of waste products as new suppliers of useful bioactive compounds, namely antioxidants. All the assayed by-products revealed good antioxidant properties, with very low EC(50) values (lower than 380 μg/mL), particularly for lipid peroxidation inhibition (lower than 140 μg/mL). The total phenols and flavonoids contents were also determined. The correlation between these bioactive compounds and DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity, reducing power, inhibition of β-carotene bleaching and inhibition of lipid peroxidation in pig brain tissue through formation of thiobarbituric acid reactive substances, was also obtained. Although, all the assayed by-products proved to have a high potential of application in new antioxidants formulations, chestnut skins and leaves demonstrated better results.

  7. Formation of nitrogenous disinfection by-products in 10 chlorinated and chloraminated drinking water supply systems.

    Science.gov (United States)

    Liew, Deborah; Linge, Kathryn L; Joll, Cynthia A

    2016-09-01

    The presence of nitrogenous disinfection by-products (N-DBPs) in drinking water supplies is a public health concern, particularly since some N-DBPs have been reported to be more toxic than the regulated trihalomethanes and haloacetic acids. In this paper, a comprehensive evaluation of the presence of N-DBPs in 10 drinking water supply systems in Western Australia is presented. A suite of 28 N-DBPs, including N-nitrosamines, haloacetonitriles (HANs), haloacetamides (HAAms) and halonitromethanes (HNMs), were measured and evaluated for relationships with bulk parameters in the waters before disinfection. A number of N-DBPs were frequently detected in disinfected waters, although at generally low concentrations (water, N-DBP concentrations were significantly correlated with dissolved organic carbon (DOC) and ammonia, and these, in addition to high bromide in one of the waters, led to elevated concentrations of brominated HANs (26.6 μg/L of dibromoacetonitrile). There were significant differences in the occurrence of all classes of N-DBPs between chlorinated and chloraminated waters, except for HNMs, which were detected at relatively low concentrations in both water types. Trends observed in one large distribution system suggest that N-DBPs can continue to form or degrade within distribution systems, and redosing of disinfectant may cause further by-product formation.

  8. Hygiene of work in main shops of modern coking by-product industry. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Kapitul' skii, V B

    1984-07-01

    The hygiene of working conditions is evaluated and compared for coking by-product industry shops using modern technology and machines with those using obsolete equipment and methods. Most basic factors in contamination of atmosphere of coking, pitch-coking and metal-refining shops are coal and coke dust, carbon monoxide and polycyclic aromatic hydrocarbons, especially carcinogenic benzpyrene. Contamination of air of working zone is determined by details of technology: periodicity or continuity of industrial processes, use of improved equipment for smokeless injection of charge into stoves and of hermetic pipes to remove gas with hydraulically operated caps, position of machines in shops and in coal tar distillation removal of carcinogenic benzpyrene by sulfonation and aeration. In modernized shops of coking by-product industry, illness and loss of work capacity are significantly lower than in plants using obsolete methods and equipment. Measures are presented for hygienic improvement of working conditions; both methods to further increase efficiency of technological processes and methods to protect individual worker on job such as use of respirators, protective clothing, plexiglass shields, shampoos and skin creams. 14 references.

  9. A review of lipid extraction from fish processing by-product for use as a biofuel

    International Nuclear Information System (INIS)

    Adeoti, Ibraheem A.; Hawboldt, Kelly

    2014-01-01

    Fish processing facilities generate a significant amount of fish by-products that could be an important source of energy, food, or industrial feedstock. While fish oil is a natural source of omega-3 polyunsaturated fatty acids (mostly eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA)) used in nutritional supplements, the ability to extract, refine, and get to market of these oils may be challenging at processing facilities where there is limited infrastructure and plants are remotely located. Under these conditions, extraction of oil from fish by-product for use as an in-house or regional fuel may be both economically and environmentally be a more sustainable approach. Processes to extract and refine fish oil for fuel are less energy intensive than the processes for nutritional quality oils and do not require the stringent product specifications and approval process as in the food and pharmaceutical industry. Unlike food crops, extraction of oil from fish residue does not negatively impact food production. This paper presents an overview of developments made in fish oil extraction methodologies including physical, chemical and biological processes. - Highlights: • We have reviewed various lipid extraction methods from fish residue. • Low grade fish oils for fuel applications can be beneficial to facility and region. • The environmental impacts and safety issues can be reduced using SFE method

  10. Kinetic model for the radical degradation of tri-halonitromethane disinfection byproducts in water

    International Nuclear Information System (INIS)

    Mezyk, Stephen P.; Mincher, Bruce J.; Cooper, William J.; Kirkham Cole, S.; Fox, Robert V.; Gardinali, Piero R.

    2012-01-01

    The halonitromethanes (HNMs) are byproducts of the ozonation and chlorine/chloramine treatment of drinking waters. Although typically occurring at low concentrations HNMs have high cytotoxicity and mutagenicity, and may therefore represent a significant human health hazard. In this study, we have investigated the radical based mineralization of fully-halogenated HNMs in water using the congeners bromodichloronitromethane and chlorodibromonitromethane. We have combined absolute reaction rate constants for their reactions with the hydroxyl radical and the hydrated electron as measured by electron pulse radiolysis and analytical measurements of stable product concentrations obtained by 60 Co steady-state radiolysis with a kinetic computer model that includes water radiolysis reactions and halide/nitrogen oxide radical chemistry to fully elucidate the reaction pathways of these HNMs. These results are compared to our previous similar study of the fully chlorinated HNM chloropicrin. The full optimized computer model, suitable for predicting the behavior of this class of compounds in irradiated drinking water, is provided. - Highlights: ► Radical-based mineralization of aqueous halonitromethane disinfection byproducts. ► Constructed kinetic computer model for tri-halogenated halonitromethane removal. ► Model predicted that superoxide reaction is unimportant for halonitromethanes. ► Measured superoxide reaction with chloropicrin was negligibly slow, 4 M −1 s −1 . ► Determined that superoxide reaction with nitrate also insignificant at ∼10 4 M −1 s −1 .

  11. Effects of spray drying on antioxidant capacity and anthocyanidin content of blueberry by-products.

    Science.gov (United States)

    Lim, Kar; Ma, Mitzi; Dolan, Kirk D

    2011-09-01

    The effect of spray drying on degradation of nutraceutical components in cull blueberry extract was investigated. Samples collected before and after spray drying were tested for antioxidant capacity using oxygen radical absorbance capacity (ORAC(FL) ) and total phenolics; and for individual anthocyanidins. In Study 1, four different levels of maltodextrin (blueberry solids to maltodextrin ratios of 5: 95, 10: 90, 30: 70, and 50: 50) were spray dried a pilot-scale spray dryer. There was significantly higher retention of nutraceutical components with increased levels of maltodextrin indicating a protective effect of maltodextrin on the nutraceutical components during spray drying. In Study 2, the air inlet temperature of the spray dryer was kept constant for all runs at 150 °C, with 2 different outlet temperatures of 80 and 90 °C. The degradation of nutraceutical components was not significantly different at the 2 selected outlet temperatures. ORAC(FL) reduction for blueberry samples after spray drying was 66.3% to 69.6%. After spray drying, total phenolics reduction for blueberry was 8.2% to 17.5%. Individual anthocyanidin reduction for blueberry was 50% to 70%. The experimental spray dried powders compared favorably to commercial blueberry powders. Results of the study show that use of blueberry by-products is feasible to make a value-added powder. Results can be used by producers to estimate final nutraceutical content of spray-dried blueberry by-products. © 2011 Institute of Food Technologists®

  12. Natural bioactive compounds from winery by-products as health promoters: a review.

    Science.gov (United States)

    Teixeira, Ana; Baenas, Nieves; Dominguez-Perles, Raul; Barros, Ana; Rosa, Eduardo; Moreno, Diego A; Garcia-Viguera, Cristina

    2014-09-04

    The relevance of food composition for human health has increased consumers' interest in the consumption of fruits and vegetables, as well as foods enriched in bioactive compounds and nutraceuticals. This fact has led to a growing attention of suppliers on reuse of agro-industrial wastes rich in healthy plant ingredients. On this matter, grape has been pointed out as a rich source of bioactive compounds. Currently, up to 210 million tons of grapes (Vitis vinifera L.) are produced annually, being the 15% of the produced grapes addressed to the wine-making industry. This socio-economic activity generates a large amount of solid waste (up to 30%, w/w of the material used). Winery wastes include biodegradable solids namely stems, skins, and seeds. Bioactive compounds from winery by-products have disclosed interesting health promoting activities both in vitro and in vivo. This is a comprehensive review on the phytochemicals present in winery by-products, extraction techniques, industrial uses, and biological activities demonstrated by their bioactive compounds concerning potential for human health.

  13. Bacterial Cellulose Production from Industrial Waste and by-Product Streams

    Directory of Open Access Journals (Sweden)

    Erminda Tsouko

    2015-07-01

    Full Text Available The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L and commercial sucrose (4.9 g/L were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102–138 g·water/g·dry bacterial cellulose, viscosities of 4.7–9.3 dL/g, degree of polymerization of 1889.1–2672.8, stress at break of 72.3–139.5 MPa and Young’s modulus of 0.97–1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients.

  14. Exploration of avocado by-products as natural sources of bioactive compounds

    Science.gov (United States)

    Tremocoldi, Maria Augusta; Rosalen, Pedro Luiz; Franchin, Marcelo; Massarioli, Adna Prado; Denny, Carina; Daiuto, Érica Regina; Paschoal, Jonas Augusto Rizzato; Melo, Priscilla Siqueira

    2018-01-01

    This study aimed to evaluate the antioxidant, anti-inflammatory, and cytotoxic properties and phenolic composition of peel and seed of avocado varieties Hass and Fuerte using green solvents. Ethanol soluble compounds were identified in peel and seed of both varieties using HPLC-MS/MS and quantified using HPLC-DAD. Agro-industrial by-products of both varieties exhibited high radical scavenging activity against synthetic free radicals (DPPH and ABTS) and reactive oxygen species (peroxyl, superoxide, and hypochlorous acid) and high ability to reduce Fe3+ to Fe2+. The main compounds with significant contribution to the antioxidant activity determined by online HPLC-ABTS●+ analyses were procyanidin B2 and epicatechin in the peel and trans-5-O-caffeoyl-D-quinic acid, procyanidin B1, catechin, and epicatechin in the seed. Peel of Fuerte significantly suppressed TNF-α and nitric oxide (NO) release (459.3 pg/mL and 8.5 μM, respectively), possibly because of the high phenolic content and antioxidant activity detected. Avocado agro-industrial by-products can be used for food and pharmaceutical purposes due to their antioxidant and anti-inflammatory properties. PMID:29444125

  15. Thin layer drying kinetics of by-products from olive oil processing.

    Science.gov (United States)

    Montero, Irene; Miranda, Teresa; Arranz, Jose Ignacio; Rojas, Carmen Victoria

    2011-01-01

    The thin-layer behavior of by-products from olive oil production was determined in a solar dryer in passive and active operation modes for a temperature range of 20-50 °C. The increase in the air temperature reduced the drying time of olive pomace, sludge and olive mill wastewater. Moisture ratio was analyzed to obtain effective diffusivity values, varying in the oil mill by-products from 9.136 × 10(-11) to 1.406 × 10(-9) m(2)/s in forced convection (m(a) = 0.22 kg/s), and from 9.296 × 10(-11) to 6.277 × 10(-10) m(2)/s in natural convection (m(a) = 0.042 kg/s). Diffusivity values at each temperature were obtained using the Fick's diffusion model and, regardless of the convection, they increased with the air temperature. The temperature dependence on the effective diffusivity was determined by an Arrhenius type relationship. The activation energies were found to be 38.64 kJ/mol, 30.44 kJ/mol and 47.64 kJ/mol for the olive pomace, the sludge and the olive mill wastewater in active mode, respectively, and 91.35 kJ/mol, 14.04 kJ/mol and 77.15 kJ/mol in natural mode, in that order.

  16. In vitro inhibitory effects of plant-derived by-products against Cryptosporidium parvum

    Directory of Open Access Journals (Sweden)

    Teichmann Klaus

    2016-01-01

    Full Text Available Disposal of organic plant wastes and by-products from the food or pharmaceutical industries usually involves high costs. In the present study, 42 samples derived from such by-products were screened in vitro against Cryptosporidium parvum, a protozoan parasite that may contaminate drinking water and cause diarrhoea. The novel bioassay was previously established in the microtitre plate format. Human ileocaecal adenocarcinoma (HCT-8 cell cultures were seeded with C. parvum oocysts and parasite development was monitored by an indirect fluorescent antibody technique (IFAT and microscopic assessment for clusters of secondary infection (CSI. Minimum inhibitory concentrations (MICs and potential detrimental effects on the host cells were determined. An ethanolic extract from olive (Olea europaea pomace, after oil pressing and phenol recovery, reproducibly inhibited C. parvum development (MIC = 250–500 μg mL−1, IC50 = 361 (279–438 μg mL−1, IC90 = 467 (398–615 μg mL−1. Accordingly, tyrosol, hydroxytyrosol, trans-coniferyl alcohol and oleuropein were selected as reference test compounds, but their contributions to the observed activity of the olive pomace extract were insignificant. The established test system proved to be a fast and efficient assay for identifying anti-cryptosporidial activities in biological waste material and comparison with selected reference compounds.

  17. Influence of copper on the by-products of different oil-paper insulations

    Energy Technology Data Exchange (ETDEWEB)

    Hao Jian; Liao Ruijin [State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University (China); Chen, George [School of Electronics and Computer Science, University of Southampton (United Kingdom); Ma Chao, E-mail: cquhaojian@126.com [Gansu Electric Power Research Institute (China)

    2011-08-12

    Transformer failure caused by the corrosion of copper material in transformer attracts great attention of researchers and engineers. In this paper, Karamay No. 25 naphthenic mineral oil, Karamay No. 25 paraffinic mineral oil, Kraft paper and copper were used to compose four combinations of oil-paper insulation samples. The ageing by-products and dielectric properties of the four combinations of oil-paper insulation samples were compared after they were thermally aged at 130 deg. C. The influence of copper on the by-products and dielectric properties of different oil-paper insulations was obtained. The results show that copper can accelerate the ageing rate of insulation oils and reduce their AC breakdown voltage. The content of copper substance dissolved in insulating oil increases with ageing time at first and then decreases. The paper aged in the oil-paper insulation sample with copper has higher moisture content than the one without copper. Results of energy dispersive spectroscopy (EDS) in the scanning electron microscope (SEM) show that there is copper product deposited on the surface of insulation paper. The insulation oil and paper aged in the oil-paper insulation sample with copper have higher dielectric loss and conductivity than that without copper.

  18. Nuclear Power

    International Nuclear Information System (INIS)

    Douglas-Hamilton, J.; Home Robertson, J.; Beith, A.J.

    1987-01-01

    In this debate the Government's policy on nuclear power is discussed. Government policy is that nuclear power is the safest and cleanest way of generating electricity and is cheap. Other political parties who do not endorse a nuclear energy policy are considered not to be acting in the people's best interests. The debate ranged over the risks from nuclear power, the UK safety record, safety regulations, and the environmental effects of nuclear power. The Torness nuclear power plant was mentioned specifically. The energy policy of the opposition parties is strongly criticised. The debate lasted just over an hour and is reported verbatim. (UK)

  19. Optimization of aqueous enzymatic extraction of oil from shrimp processing by-products using response surface methodology

    Directory of Open Access Journals (Sweden)

    Chen WENWEI

    2018-06-01

    Full Text Available Abstract The aqueous enzymatic extraction (AEE of oil from shrimp processing by-products was investigated. Four kinds of proteases, including alkaline protease, neutral protease, flavor protease and compound protease, were applied to hydrolysis shrimp processing by-products. The results showed that flavor protease was the best hydrolysis enzyme for shrimp processing by-products to obtain high oil recovery. The influences of four factors, including enzyme amount, liquid/solid ratio, hydrolysis time and hydrolysis temperature, on shrimp oil extraction yield were also studied. The flavor enzyme hydrolysis condition was optimized as following: enzyme amount of 2.0% (w/w, liquid/solid ratio of 9.0ml/g, hydrolysis time of 2.6 h and hydrolysis temperature of 50 °C. Under these optimum hydrolysis conditions, the experimental oil extraction yield was 88.9%.

  20. Development of new apple beverages rich in isothiocyanates by using extracts obtained from ultrasound-treated cauliflower by-products

    DEFF Research Database (Denmark)

    Amofa-Diatuo, Tracy; Anang, Daniel M.; Barba Orellana, Francisco Jose

    2017-01-01

    The objective of this study was to develop a new apple juice beverage enriched with isothiocyanates (ITC) - rich extracts obtained from cauliflower by-products. Ultrasound-assisted extraction (UAE) at different amplitudes (20-100%) and extraction times (0-10. min) at a frequency of 24. kHz was em......The objective of this study was to develop a new apple juice beverage enriched with isothiocyanates (ITC) - rich extracts obtained from cauliflower by-products. Ultrasound-assisted extraction (UAE) at different amplitudes (20-100%) and extraction times (0-10. min) at a frequency of 24. k......) and UAE (20%, 3. min), respectively. Moreover, the highest recovery of total phenolic compounds (TPC) (≈105. mg gallic acid equivalent (GAE)/L) μM) was found after UAE (100% amplitude, 3. min) of TPC from stems. ITC-rich extracts obtained from caulifower by-products at the optimum UAE conditions were...

  1. The use of by-products from metallurgical and mineral industries as filler in cement-based materials.

    Science.gov (United States)

    Moosberg, Helena; Lagerblad, Björn; Forssberg, Eric

    2003-02-01

    This investigation has been made in order to make it possible to increase the use of by-products in cement-based materials. Use of by-products requires a screening procedure that will reliably determine their impact on concrete. A test procedure was developed. The most important properties were considered to be strength development, shrinkage, expansion and workability. The methods used were calorimetry, flow table tests, F-shape measurements, measurements of compressive and flexural strength and shrinkage/expansion measurements. Scanning electron microscopy was used to verify some results. Twelve by-products were collected from Swedish metallurgical and mineral industries and classified according to the test procedure. The investigation showed that the test procedure clearly screened out the materials that can be used in the production of concrete from the unsuitable ones.

  2. In situ olive mill residual co-composting for soil organic fertility restoration and by-product sustainable reuse

    Directory of Open Access Journals (Sweden)

    Teresa Casacchia

    2012-06-01

    Full Text Available The addition of organic matter in the form of compost improves overall physical, chemical and biological properties of soils but, to be really sustainable, the composting process should be carried out using the by-products available in situ. Two different soils of a Mediterranean olive orchard, one managed traditionally (NAS and the other amended with compost (AS, were investigated in a two-year experiment. Increases in total organic matter, total nitrogen and pH, were detected in AS if compared to NAS. Significant increases in total and specific microbial counts were observed in AS, with a clear amelioration of microbiological soil quality. The results demonstrated that soil amendment using compost deriving from olive mill by-products can be an important agricultural practice for supporting and stimulating soil microorganisms and, at the same time, for re-using these byproducts, so avoiding their negative environmental impact.

  3. JPRS Report, Nuclear Developments

    National Research Council Canada - National Science Library

    1991-01-01

    Partial Contents: Medium Range Missiles, Rocket Engine, Nuclear Submarine, Nuclear Reactor, Nuclear Inspection, Nuclear Weapons, Transfer Technology, Scud, Safety, Nuclear Power, Chernobyl Trial, ,CHemical Weapons...

  4. X-ray photoelectron spectroscopy as detection tool for coordinated or uncoordinated fluorine atoms demonstrated on fluoride systems NaF, K2TaF7, K3TaF8, K2ZrF6, Na7Zr6F31 and K3ZrF7

    Science.gov (United States)

    Boča, Miroslav; Barborík, Peter; Mičušík, Matej; Omastová, Mária

    2012-07-01

    While systems K3TaF8 and K3ZrF7 were prepared by modified molten salt method modified wet pathway was used for reproducible preparation of Na7Zr6F31. Its congruently melting character was demonstrated on simultaneous TG/DSC measurements and XRD patterns. X-ray photoelectron spectroscopy was applied for identification of differently bonded fluorine atoms in series of compounds NaF, K2TaF7, K3TaF8, K2ZrF6, Na7Zr6F31 and K3ZrF7. Three different types of fluorine atoms were described qualitatively and quantitatively. Uncoordinated fluorine atoms (F-) provide signals at lowest binding energies, followed by signals from terminally coordinated fluorine atoms (M-F) and then bridging fluorine atoms (M-F-M) at highest energy. Based on XPS F 1s signals assigned to fluorine atoms in compounds with correctly determined structure it was suggested that fluorine atoms in K3ZrF7 have partially bridging character.

  5. Properties and possibilities to use by-product from e-beam installations for partial recycling of ammonia

    International Nuclear Information System (INIS)

    Pelovski, Y.

    2011-01-01

    Generated by-products from E-beam cleaning systems of industrial waste gases have been studied using different techniques like TG-DTA systems, Electron Microscopy, X-Ray diffraction and IR spectroscopy methods. On the base of the investigations it was found that the composition of the by-product varies depending on the content of pollutants in the waste gases and technological parameters during cleaning process. Size of particles and thermal stability of the by product were determined. Content of ammonium sulphate as a main component, ammonium nitrate and heavy metals content is also determined and discussed. During thermal treatment of the by-product at temperature range 543-663K half of the ammonia is released in the gas phase. Kinetic parameters of the thermal decomposition are determined and it is confirmed that for waste gases containing mainly SO x as a pollutants they are very close to the pure ammonium sulphate. By-product from demonstration E-beam installation at Maritsa-East -2 TPP is used to produce mixed fertilisers using milled Tunisia phosphorites or tribo-activated mixtures of the by-product, Tunisia phosphorite, potassium sulphate and aches from electrostatic precipitators of TPP. It was found that during thermo-tribochemical treatment of selected mixtures different type of fertilisers could be produced, where the soluble forms of Phosphorous may vary, depending on the conditions. During thermal treatment about half of ammonia is released in the gas phase opening a way for partial recycling of ammonia to the cleaning process. Agrochemical tests of the fertilisers on the base of by-product confirm their efficiency. (author)

  6. Properties and possibilities to use by-product from e-beam installations for partial recycling of ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Pelovski, Y. [University of Chemical Technology and Metallurgy, Sofia (Bulgaria)

    2011-07-01

    Generated by-products from E-beam cleaning systems of industrial waste gases have been studied using different techniques like TG-DTA systems, Electron Microscopy, X-Ray diffraction and IR spectroscopy methods. On the base of the investigations it was found that the composition of the by-product varies depending on the content of pollutants in the waste gases and technological parameters during cleaning process. Size of particles and thermal stability of the by product were determined. Content of ammonium sulphate as a main component, ammonium nitrate and heavy metals content is also determined and discussed. During thermal treatment of the by-product at temperature range 543-663K half of the ammonia is released in the gas phase. Kinetic parameters of the thermal decomposition are determined and it is confirmed that for waste gases containing mainly SO{sub x} as a pollutants they are very close to the pure ammonium sulphate. By-product from demonstration E-beam installation at Maritsa-East -2 TPP is used to produce mixed fertilisers using milled Tunisia phosphorites or tribo-activated mixtures of the by-product, Tunisia phosphorite, potassium sulphate and aches from electrostatic precipitators of TPP. It was found that during thermo-tribochemical treatment of selected mixtures different type of fertilisers could be produced, where the soluble forms of Phosphorous may vary, depending on the conditions. During thermal treatment about half of ammonia is released in the gas phase opening a way for partial recycling of ammonia to the cleaning process. Agrochemical tests of the fertilisers on the base of by-product confirm their efficiency. (author)

  7. Land application uses for dry FGD by-products. Phase 1, [Annual report], December 1, 1991--November 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W. [Ohio State Univ., Columbus, OH (United States); Haefner, R. [Geological Survey, Columbus, OH (United States). Water Resources Div.

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. Presently FGD by-product materials are treated as solid wastes and must be landfilled. However, landfill sites are becoming more scarce and tipping fees are constantly increasing. It is, therefore, highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. In summary Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD byproduct materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  8. Proliferation Resistant Nuclear Reactor Fuel

    International Nuclear Information System (INIS)

    Gray, L.W.; Moody, K.J.; Bradley, K.S.; Lorenzana, H.E.

    2011-01-01

    Global appetite for fission power is projected to grow dramatically this century, and for good reason. Despite considerable research to identify new sources of energy, fission remains the most plentiful and practical alternative to fossil fuels. The environmental challenges of fossil fuel have made the fission power option increasingly attractive, particularly as we are forced to rely on reserves in ecologically fragile or politically unstable corners of the globe. Caught between a globally eroding fossil fuel reserve as well as the uncertainty and considerable costs in the development of fusion power, most of the world will most likely come to rely on fission power for at least the remainder of the 21st century. Despite inevitable growth, fission power faces enduring challenges in sustainability and security. One of fission power's greatest hurdles to universal acceptance is the risk of potential misuse for nefarious purposes of fissionable byproducts in spent fuel, such as plutonium. With this issue in mind, we have discussed intrinsic concepts in this report that are motivated by the premise that the utility, desirability, and applicability of nuclear materials can be reduced. In a general sense, the intrinsic solutions aim to reduce or eliminate the quantity of existing weapons usable material; avoid production of new weapons-usable material through enrichment, breeding, extraction; or employ engineering solutions to make the fuel cycle less useful or more difficult for producing weapons-usable material. By their nature, these schemes require modifications to existing fuel cycles. As such, the concomitants of these modifications require engagement from the nuclear reactor and fuel-design community to fully assess their effects. Unfortunately, active pursuit of any scheme that could further complicate the spread of domestic nuclear power will probably be understandably unpopular. Nevertheless, the nonproliferation and counterterrorism issues are paramount, and

  9. Nuclear forensics

    International Nuclear Information System (INIS)

    Venugopal, V.

    2010-01-01

    Nuclear forensics is the analysis of nuclear materials recovered from either the capture of unused materials, or from the radioactive debris following a nuclear explosion and can contribute significantly to the identification of the sources of the materials and the industrial processes used to obtain them. In the case of an explosion, nuclear forensics can also reconstruct key features of the nuclear device. Nuclear forensic analysis works best in conjunction with other law enforcement, radiological protection dosimetry, traditional forensics, and intelligence work to provide the basis for attributing the materials and/or nuclear device to its originators. Nuclear forensics is a piece of the overall attribution process, not a stand-alone activity

  10. Nuclear power

    International Nuclear Information System (INIS)

    1987-01-01

    ''Nuclear Power'' describes how a reactor works and examines the different designs including Magnox, AGR, RBMK and PWR. It charts the growth of nuclear generation in the world and its contributions to world energy resources. (author)

  11. Nuclear Scans

    Science.gov (United States)

    Nuclear scans use radioactive substances to see structures and functions inside your body. They use a special ... images. Most scans take 20 to 45 minutes. Nuclear scans can help doctors diagnose many conditions, including ...

  12. Nuclear energy

    International Nuclear Information System (INIS)

    Kuhn, W.

    1986-01-01

    This loose-leaf collection is made up of five didactically prepared units covering the following subjects: basic knowledge on nuclear energy, nuclear energy in relation to energy economy, site issues, environmental compatibility of nuclear energy, and nuclear energy in the focus of political and social action. To this was added a comprehensive collection of material: specific scientific background material, a multitude of tables, diagrams, charts etc. for copying, as well as 44 transparent charts, mostly in four colours. (orig./HP) [de

  13. Nuclear structure

    International Nuclear Information System (INIS)

    Eastham, D.A.; Joy, T.

    1986-01-01

    The paper on 'nuclear structure' is the Appendix to the Daresbury (United Kingdom) Annual Report 1985/86, and contains the research work carried out at the Nuclear Structure Facility, Daresbury, within that period. During the year a total of 74 experiments were scheduled covering the main areas of activity including: nuclear collective motion, nuclei far from stability, and nuclear collisions. The Appendix contains brief reports on these experiments and associated theory. (U.K.)

  14. Digestibility and postprandial ammonia excretion in Nile tilapia (Oreochromis niloticus) fed diets containing different oilseed by-products

    DEFF Research Database (Denmark)

    Obirikorang, Kwasi Adu; Amisah, Stephen; Fialor, Simon Cudjoe

    2015-01-01

    The present study was undertaken to evaluate the potential for using oilseed by-products (soybean, copra and palm kernel meals) as partial replacements of fishmeal in feeds for Nile tilapia (Oreochromis niloticus). Nutrient digestibility and postprandial ammonia excretion rates were examined....... A fishmeal-based diet served as control against three test diets in which 30 % of each of the oilseed by-products was included. Diets were randomly assigned to triplicate groups of fish (similar to 1 kg bulk weight) for the digestibility trials which spanned a total of 9 days. The partial inclusion...

  15. Fortification of Sardine Fish Oil from By-product of Canning Processing into Beef Meatball and Chicken Nugget

    OpenAIRE

    Teti Estiasih; Endang Trowulan; Widya Dwi Rukmi

    2017-01-01

    One source of ω-3 fatty acids is a by-product of lemuru canning processing that can be used for fortification.  Generally, fortification uses fish oil microcapsule but it is more expensive than direct fortification.  In this study, fish oil from a by-product of lemuru canning processing was directly fortified into beef meatball and chicken nugget at concentration of 0, 2, 4, and 6% (w/w).  Oxidation level, free fatty acid content, colour, lightness, texture, and sensory acceptance by triangle...

  16. Potential of landrace winery by-products (Vitis vinifera L. as a source of phenolic compounds with antioxidant properties

    Directory of Open Access Journals (Sweden)

    Maria Carme Garau

    2015-12-01

    Significance and impact of the study: To the best of our knowledge, this is the first time that the phenolic composition and antioxidant properties of winery by-products from grape varieties native to the Balearic Islands are examined. Due to the increasing use of these minor grape varieties in winemaking, the phenolic characterization of their by-products is of great interest for the wine sector, which could exploit these underutilized resources more efficiently and extensively so as to support sustainable agricultural production.

  17. Use of the by-products of the biodiesel productive chain; Aproveitamento dos subprodutos da cadeia produtiva do biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Moebus, Fernando; Almeida, Silvio Carlos Anibal de [Universidade Federal do Rio de Janeiro (DEM/EP/UFRJ), RJ (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica], Emails: f_moebus@polis.ufrj.br, silvioa@gmail.com

    2010-07-01

    This paper performs an economical analysis of the incomes obtained with the using of byproducts of productive chain of bio diesel. Two technologies will be studied as follows: the commercialization of the residues (peels, cake) in the form of briquettes, and glycerin. A cost spreadsheet was developed for quantification the costs for obtain the biodiesel from the different raw-materials in a process of batch. Besides the cost of raw material and others inputs (catalyst and methanol), it will be analysed the main factors that influences the final costs of product a the generated incomes with commercialization of by-products.

  18. Nuclear terrorism

    International Nuclear Information System (INIS)

    2002-01-01

    Recent reports of alleged terrorist plans to build a 'dirty bomb' have heightened longstanding concerns about nuclear terrorism. This briefing outlines possible forms of attack, such as: detonation of a nuclear weapon; attacks involving radioactive materials; attacks on nuclear facilities. Legislation addressing these risks and the UK's strategy for coping with them are also considered

  19. Nuclear power

    International Nuclear Information System (INIS)

    d'Easum, Lille.

    1976-03-01

    An environmentalist's criticism of nuclear energy is given, on a layman's level. Such subjects as conflict of interest in controlling bodies, low-level radiation, reactor safety, liability insurance, thermal pollution, economics, heavy water production, export of nuclear technology, and the history of the anti-nuclear movement are discussed in a sensationalistic tone. (E.C.B.)

  20. Nuclear alerts

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    Anti-nuclear demonstrations against the deployment of new US missiles were held in Nato Europe. As no agreement has yet been reached at the US-Soviet Intermediate Nuclear Forces talks in Geneva, the deployment of nuclear missiles in Europe has started