WorldWideScience

Sample records for nouvelles installations industrielles

  1. Meeting around industrial sites; Concertation autour des sites d'installations industrielles

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Th. [Centre d' etude sur l' Evaluation de la Protection dans le domaine Nucleaire (CEPN), 92 - Fontenay aux Roses (France); Sene, M. [Groupement de Scientifiques pour l' Information sur l' Energie Nucleaire, 91 - Orsay (France); Melguen, M. [Electricite de France (EDF), 75 - Paris (France); Saint-Raymond, Ph. [Direction Generale de la Surete Nucleaire et de la Radioprotection, 75 - Paris (France); Oudiz, A. [Institut de Radioprotection et de Surete Nucleaire, 92 - Fontenay-aux-Roses (France); Brie, J. [Charente Nature (France); Schmitt, P. [CLS de Fessenheim, 68 (France); Verot, Y [Atofina, 92 -Paris la Defense (France); Quintin, Ch. [DRIRE Rhone Alpes, 69 (France); Dubuis, Th. [Secretariat Permanent pour la Prevention des Pollutions Industrielles, 59 - Dunkerque (France); Adelfa, J.S.; Hocquet, M.P. [CLCV, France (France); Gheerardyn, P. [MEDEF Cote d' Opale (France); Villers, S. [EDA, France (France); Modrzejewski, F. [DRIRE Nord-Pas-de-Calais (France); Gadbois, S.; Heriard-Dubreuil, G. [MUTADIS, 75 - Paris (France); Geismar, N.; Eimer, M. [CLI de Saint-Laurent (France); Andre, S. [CEA Cadarache, 13 - Saint-Paul-lez-Durance (France); Vindimian, E. [Institut National de l' Environnement Industriel et des Risques, 60 - Verneuil en Halatte (INERIS) (France); Remond-Gouilloud, M. [Universite Paris-Sorbonne, 75 (France)

    2005-07-01

    Following the research work on the ' stakes in the social dialogue around the follow-up of the nuclear industrial installations ' engaged by the I.R.S.N. in 2000, a seminar was organized on January 21. and 22., 2003 in Ville d Avray. This seminar gathered personalities of different origins (administration, institutional experts, operators, associations, Local Commissions of Information, elected representatives) to discuss and enrich the conclusions of the research work and elaborate collectively a contribution to the current remarks in France on the public debate and the processes of dialogue. The present report establishes the acts of this seminar and redraws all the discussions between the participants. (N.C.)

  2. Une installation expérimentale pour l'étude du traitement par combustion des fumées industrielles An Experimental Plant for Processing Industrial Fumes by Combustion

    Directory of Open Access Journals (Sweden)

    Morillon R.

    2006-11-01

    Full Text Available Le rejet à l'atmosphère d'effluents gazeux d'origine industrielle entraîne un accroissement sensible de la pollution atmosphérique ; en outre, il s'accompagne souvent d'une perte d'énergie lorsque l'élément polluant est un hydrocarbure. Dans ce cas, l'utilisation du gaz naturel pour le traitement par combustion des fumées industrielles apporte une solution élégante et souvent peu coûteuse grâce à la récupération d'énergie qu'il est possible de faire. La première partie de l'article rappelle les aspects théoriques de ce traitement ; en particulier, l'influence des divers éléments sur son efficacité y est discutée (composition de l'atmosphère polluée, température, temps de séjour, etc.. II apparaît ainsi que diverses conditions doivent être remplies simultanément pour obtenir une efficacité satisfaisante. Afin de disposer d'éléments d'ingénierie permettant de construire les unités de traitement les plus efficaces et les plus sûres possible, au coût le plus bas possible, la Direction des études et techniques nouvelles du Gaz de France a réalisé une installation expérimentale qui est présentée dans la deuxième partie de l'article. Enfin, quelques examples d'utilisation de cette installation expérimentale, qui constitue un nouvel outil de travail mis à la disposition des utisitateurs et des constructeurs, sont décrits dans la troisième partie de l'article. The discharge into the atmosphere of industrial waste gases causes substantially increased air pollution. Moreover, it is often accompanied by loss of energy when the polluting element is a hydrocarbon. In such cases, the use of natural gas for processing industrial fumes by combustion provides an elegant solution, which moy often prove economical too becouse of the recovery of energy it makes possible. The first part of this article reviews the theoretical aspects of such processing. The way in which its effectiveness is affected by various parameters

  3. The processing and management of wastes from atomic reactors; Nouvelles installations industrielles du C.E.A. pour le traitement des dechets radioactifs liquides et solides

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E; Bourdrez, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The policy concerning radioactive wastes studied by all Atomic Centres has led to various procedures which, while apparently numerous, come under a few standard headings. Whether the wastes are in the liquid or solid state their management depends on their physical and chemical nature. The procedure adopted is governed by three general principles: - determination of the most economical means possible of storage and processing by volume reduction; - conversion to a solid compact form; - complete acceptance of the accepted standards at all places and all times. In this communication all the standard solutions adopted and used by the various Centres of the Commissariat a l'Energie Atomique will be examined bearing in mind the preceding remarks. Particular mention will be made of the following: - For liquids, physical, chemical and physico-chemical processing - For solids, decontamination, volume reduction and long-term conditioning techniques. The different procedures for collecting and storing solid wastes before and after processing are also discussed. The paper ends with a brief review of the studies, both technical and economic, being pursued on this subject. (authors) [French] La gestion des dechets etudies par tous les Centres Atomiques a donne lieu a des solutions qui - bien que nombreuses en apparence - se ramenent a quelques solutions types, peu nombreuses. Qu'il s'agisse de dechets solides ou liquides, la nature physique et chimique des dechets conditionne leur mode de gestion. Celle-ci procede de trois principes generaux: - recherche du mode de stockage et de traitement aussi economique que possible par reduction de volume; - mise sous forme compacte solide; - garantie du respect des normes en tous lieux et en tous temps. Dans cette communication, nous examinons toutes les solutions types, compte tenu des remarques precedentes, qui ont ete adoptees et sont utilisees par les differents Centres du Commissariat a l'Energie Atomique. Nous rappelons en particulier: - Pour les liquides, les traitements par voie physique, chimique et physicochimique. - Pour les solides, les techniques de decontamination, de reduction de volume et de conditionnement de longue duree. Nous developpons egalement dans ce rapport les differents modes de collecte et de stockage avant et apres traitement des dechets solides. La communication se termine par un rapide expose des etudes en cours, tant techniques qu'economiques sur ce sujet. (auteurs)

  4. For a new industrial policy; Pour une nouvelle politique industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Beffa, J.L

    2005-01-01

    After a presentation of the french industrial policy, this report suggests some new avenues of research programs. In the domain of the energy, the author proposes: the fuel cell and the hydrogen, the nuclear of IV generation, the nuclear wastes management, the clean and low consumption vehicle, the biofuels, the solar photovoltaic, the CO{sub 2} picking and storage. (A.L.B.)

  5. Conséquences industrielles et écologiques de l'introduction de nouvelles espèces dans les hydrosystèmes continentaux : la moule zébrée et autres espèces invasives

    Directory of Open Access Journals (Sweden)

    KHALANSKI M.

    1997-01-01

    Full Text Available Les eaux de surface sont prélevées pour divers usages industriels, parmi lesquels la production d'énergie électrique représente une large part. Dans les circuits d'eau brute se fixent de nombreuses espèces d'organismes aquatiques, qui perturbent le fonctionnement des installations et sont susceptibles d'entraîner l'indisponibilité de certaines d'entre elles. Dans certains cas, l'irruption de nouvelles espèces pose un problème grave à l'industrie. L'introduction de deux espèces de moules zébrées (genre Dreissena dans les Grands Lacs américains, puis leur extension progressive vers le sud des États-Unis au cours des dernières années, se chiffre par un dommage pour l'industrie estimé à cinq milliards de dollars par an en 2000. L'impact écologique de la moule zébrée en Amérique du Nord a fait l'objet de nombreux travaux ; dans la phase d'extension rapide de l'espèce, il semble significatif. En Europe, la moule zébrée constitue aussi une menace pour les circuits industriels ; c'est pourquoi cette espèce a fait l'objet de nombreuses études, notamment en France sur la Seine, le Rhône et la Moselle. Deux nouvelles espèces invasives sont récemment apparues dans les cours d'eau européens : il s'agit du clam asiatique Corbicula fluminea et d'un amphipode : Corophium curvispinum. Elles s'ajoutent à la liste faunistique des organismes observés dans les circuits de centrales thermiques installées sur les cours d'eau français : spongiaires, hydraires, bryozoaires, mollusques. Pour assurer la disponibilité des circuits, il faut pouvoir contrôler le développement de ces espèces ; ce qui implique une connaissance approfondie de leur biologie et de leur écologie. Les méthodes de lutte actuellement mises en oeuvre au plan industriel, ou qui sont à l'étude, sont brièvement passées en revue.

  6. Determination of the load factor of an industrial installation: application to the Silva process; Determination du taux de charge d'une installation industrielle: application au procede Silva

    Energy Technology Data Exchange (ETDEWEB)

    Le Guyadec, E. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/SLC), 26 - Pierrelatte (France); Levoy, R. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/SIM), 26 - Pierrelatte (France); Michel, N. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/STS), 26 - Pierrelatte (France); Radwan, J. [CEA Saclay, Dept. des Procedes d' Enrichissement (DCC/DPE/SPTE), 91 - Gif-sur-Yvette (France); Valadier, L. [CEA Saclay, Dept. des Procedes d' Enrichissement (DCC/DPE/SPTE), 91 - Gif-sur-Yvette (France)

    2000-07-01

    In the present development phase of the SILVA process, the CEA has to calculate the availability of the future SILVA plant. Its production capacity will greatly depend on the reliability of its components. Specific software has been developed to calculate this, basically divided into three parts Database (CRESUS) on the reliability and maintainability of the components gathered into functional groups. Database (REMUS) on continuous degradation laws for their performance. Code (OCTOPUS) on production capacity, containing three models - model of the architecture of the laser, separator and shuttle apparatus. - numerical code to calculate production from the states of the equipment. - model for maintenance scenarios. A complete set of data is processed concerning the failure or survival of actually tested components, or the scaling-up models proposed by the experts. The availability of the future SILVA plant is finally obtained with its production rate and its optimum maintenance policy, comprising curative and preventive maintenance. The entire data chain is organized to be structured, traceable and shared by all the players. At present, data from 15 experimental installations, 50 types of equipment and 221 components are taken into account for compilation of the CRESUS database. Information such as test characteristics, description of events (i.e. preventive component exchange or type of failure, etc.) and description of the version of the components under test, are furnished by the experimenters in user-friendly forms developed with 'Access' software. These data are used to calculate the component failure laws through the history of each. This is followed by the determination of the reliability law parameters and confidence limits for the functional groups, for example the beta and eta parameters of the universal statistical Weibull distribution for the failure rate determined by a maximum likelihood method. This provides information such as Mean Time

  7. La performance economique de la filiere tomate industrielle en Algerie

    African Journals Online (AJOL)

    Dans ce papier, on rend compte de l'évolution de la filière "tomates industrielles" en Algérie. On y montre d'abord que la production de tomates industrielles, depuis 1970, a connu un taux de croissance significatif, dépassant largement le taux de croissance démographique. Le taux a cependant été négatif en moyenne au ...

  8. Changements organisationnels, structures industrielles et innovations environnementales : le cas des firmes industrielles françaises

    OpenAIRE

    Nadel, Simon

    2014-01-01

    La thèse analyse les déterminants de l’adoption des innovations environnementales dans l’industrie française et ses interactions avec les changements organisationnels, d’une part, et les structures industrielles, d’autre part. Elle offre tout d’abord une revue de la littérature économique qui fonde l’analyse de l’innovation environnementale. Elle propose ensuite une analyse empirique, sur données d’entreprise, du comportement éco-innovateur des firmes autour de trois éclairages. La première p...

  9. La « nouvelle modernité » urbaine.

    Directory of Open Access Journals (Sweden)

    Alexis Salanson

    2003-01-01

    Full Text Available Président du conseil scientifique de l'Institut « Pour la ville en mouvement » et professeur à l'Institut français d'urbanisme (Paris 8, François Ascher résume dans cet ouvrage les thèses qu'il a défendues tout au long de ses précédentes publications 1  : la société dans laquelle nous vivons s'éloigne irrémédiablement de ce qu'elle fut pendant la révolution industrielle pour basculer dans une « nouvelle modernité ». Celle-ci conduit à repenser ...

  10. La nouvelle-tableau (2

    Directory of Open Access Journals (Sweden)

    Géraldine Jenvrin

    2012-06-01

    Full Text Available La nouvelle « Frémissante, la feuille se flétrit » met en scène le trouble d'un détenu qui par les seuls objets dont il dispose, lutte pour s'échapper intérieurement. L'usage du regard cinématographique porté sur les détails infimes de la matérialité carcérale, leur exposition sous forme de tableaux se faisant échos, les techniques de l’anonymat et du brouillage des repères objectifs, portent à son comble les dimensions énigmatiques et l'esthétique de la  brièveté propre à la nouvelle tout en permettant de  représenter la résistance de l'homme à l'enfermement et à la persécution.

  11. EDF Energies Nouvelles - 2010 Registration Document

    International Nuclear Information System (INIS)

    2011-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles' registration document for the year 2010. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, employees, shareholders, etc. The document includes the half-year and full year financial reports

  12. Construction and Operation of a Commercial Gamma-Ray Package-Sterilizing Plant; Construction et fonctionnement d'une installation industrielle pour la sterilisation d'articles sous emballage par les rayons gamma; Razrabotka i ehkspluatatsiya sbornoj ustanovki gamma-izlucheniya promyshlennogo tipa dlya sterilizatsii meditsinskikh materialov; Construccion y funcionamiento de una instalacion industrial para la esterilizacion gamma de articulos medicos empaquetados

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C. G. [Johnson' s Ethical Plastics Ltd., Slough (United Kingdom)

    1963-11-15

    The purpose of the paper is to describe the Co{sup 60} sterilizing plant now being operated commercially by Johnson's Ethical Plastics Limited, at Slough, England. This is a continuous process plant with a source of 72000 c and completely automatic operation. Based on experience gained by U.K.A.E.A. in their Package Irradiation Plant at Wantage, the present plant was designed specifically for sterilization of disposable plastic syringes and other medical products of similar bulk density. The plant has been in operation since November 1962. A description is given of the main features of its construction, including personnel safety devices, and method of loading the source rods. Operating experience is described including dosimetry, integration of the plant into a commercial undertaking as a production process, and bacteriological results. A short discussion on the economics of sterilizing by gamma radiation is given and an assessment of possible future applications of a plant of this type. (author) [French] Le memoire est consacre a la description de l'installation de sterilisation au cobalt-60, actuellement exploitee industriellement par la Johnson Ethical Plastics Ltd., a Slough (Angleterre). Cette installation, equipee d'une source de 72 000 c, fonctionne en continu et toutes les operations y sont automatiques. Fondee sur l'experience acquise par l'Autorite de l'energie atomique du Royaume-Uni dans son installation d'irradiation d'articles sous emballage, de Wantage, l'installation decrite est specialement destinee a la sterilisation de seringues en matieres plastiques et d'autres instruments medicaux non recuperables de densite apparente analogue. L'installation est en service depuis novembre 1962. Le memoire decrit ses principales caracteristiques, y compris les appareils de protection du personnel et les dispositifs de chargement des barreaux utilises comme sources. L'auteur fournit des donnees d'ordre pratique, notamment sur la dosimetrie, l'integration de l'installation

  13. New purchase conditions by EDF, of the electrical power produced by the energy valorization installations of domestic wastes and assimilated; Nouvelles conditions d'achat par EDF de l'electricite produite par les installations de valorisation energetique des dechets managers et assimiles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The State Secretary for the Industry, C. Pierret, approved the new purchase conditions by EDF, concerning the electric power, produced by the installations of domestic wastes energy valorization. This action is in agreement with the energy policy. The purchase conditions are presented and commented. (A.L.B.)

  14. SEMINAIRE DE L'ENSEIGNEMENT TECHNIQUE Nouvelles Technologies en Tuyauteries Multicouches - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Mardi 28 mai, mercredi 29 mai 28 mai, 9:30 - 12:00 - Training Centre Auditorium, Room 11, bldg. 593 28 mai, 14:00 - 17:00; 29 mai, 9:00 - 12:00 - Training Centre Rooms 13 and 15, bldg. 593 Nouvelles Technologies en Tuyauteries Multicouches Jacques Dougoud / GEBERIT SA, Lausanne, Suisse Mario Bettini / GEORG FISCHER PFCI S.r.l., Peschiera del Garda, Brescia, Italie Christian Tacco / VALSIR S.P.A., Vestone, Brescia, Italie Depuis quelques années l'apparition de tubes multicouches a changé radicalement la conception des tuyauteries, tant pour les applications industrielles que domestiques. Les utilisations au CERN concernent pratiquement tous les fluides, c'est-à-dire eau sanitaire, eau déminéralisée, air comprimé, fluorocarbones liquides ou gazeux, et tous les gaz, depuis l'hélium jusqu'au xénon. Ce séminaire de l'Enseignement Technique est adressé à toute personne concern&eac...

  15. Betydningen af rammevilkår for strategisk miljø- og forretningsudvikling & industrielle symbioser

    DEFF Research Database (Denmark)

    Kørnøv, Lone; Lyhne, Ivar; Mortensen, Lucia

    2016-01-01

    Undersøgelsen af betydningen af rammevilkår for strategisk miljø- og forretningsudvikling & industrielle symbioser er gennemført i regi af Miljø++-samarbejdet. Undersøgelsen bygger på otte virksomhedsinterviews, workshop med Aalborg Kommune samt bootcamp med interessenter indenfor Miljø++...

  16. La photographie industrielle entre image documentaire et image publicitaire

    Directory of Open Access Journals (Sweden)

    Régis Huguenin

    2009-12-01

    Full Text Available La chocolaterie Suchard à Neuchâtel (Suisse réalise des photographies de natures très diverses qu’elle diffuse dans des cercles plus ou moins restreints. En 1967, elle inaugure un entrepôt automatique, point d’orgue d’une restructuration quasi complète de la production et dont des clichés réalisés avant et pendant les journées « portes ouvertes » témoignent. En nous intéressant aux documents iconographiques relatant l’inauguration d’un bâtiment industriel chez Suchard, nous montrons comment l’image produit une réalité qu’elle n’incarne pas automatiquement. On montre ou on cache, on accentue ou on atténue en fonction des objectifs recherchés. C’est le cas aussi des légendes qui accompagnent les clichés, toutes axées sur la rationalisation mais n’évoquant jamais les conséquences sociales de la nouvelle stratégie productive. L’oscillation entre document et publicité est en prise directe avec le temps : celui du travail du photographe, celui de la sélection par l’entreprise, celui de la perception par les employés ou par le public, le temps du classement et de l’oubli avant celui de l’exhumation et de la réutilisation  des documents par l’entreprise pour une commémoration.

  17. La gestion par affaire et pilotage de la performance des organisations industrielles

    OpenAIRE

    Pendariees, Michel

    2006-01-01

    International audience; « Dans les systèmes industriels où les produits sont conçus et réalisés en fonction des spécifications des clients, la notion d'affaire est l'entité de base de la gestion industrielle » . Aujourd'hui, la recherche de solutions globales « sur mesure », prime sur la fourniture d'un catalogue de « belles solutions », comme réponse au client. Pour être performante, l'entreprise industrielle doit s'organiser par « affaire ». Ce qui lui permet de mieux s'adapter et maîtriser...

  18. EDF Energies Nouvelles. Financial report at June 30, 2011

    International Nuclear Information System (INIS)

    2011-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles's half-year financial report for 2011. It contains a half-year activity report, the consolidated financial statements at June 30, 2011 and the report drafted by the Statutory Auditors

  19. EDF Energies Nouvelles. Consolidated financial statements at 30 June 2009

    International Nuclear Information System (INIS)

    2010-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles's registration document for the year 2009. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, employees, shareholders, etc. The document includes the group's consolidated financial statements at 31 December 2008

  20. La nouvelle vague in polarized neutron scattering

    International Nuclear Information System (INIS)

    Mezei, F.

    1986-01-01

    Polarized neutron research, like many other subjects in neutron scattering developed in the footsteps of Cliff Shull. The classical polarized neutron technique he pioneered was generalized around 1970 to vectorial beam polarizations and this opened up the way to a ''nouvelle vague'' of neutron scattering experiments. In this paper I will first reexamine the old controversy on the question whether the nature of the neutron magnetic moment is that of a microscopic dipole or of an Amperian current loop. The problem is not only of historical interest, but also of relevance to modern applications. This will be followed by a review of the fundamentals on spin coherence effects in neutron beams and scattering, which are the basis of vectorial beam polarization work. As an example of practical importance, paramagnetic scattering will be discussed. The paper concludes with some examples of applications of the vector polarization techniques, such as study of ferromagnetic domains by neutron beam depolarization and Neutron Spin Echo high resolution inelastic spectroscopy. The sample results presented demonstrate the new opportunities this novel approach opened up in neutrons scattering research. (orig.)

  1. Nouvelles et activités | Page 6 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Consultez les nouvelles et les activités. Utilisez cet outil de recherche pour trouver des nouvelles ou des activités précis dans le site Web du CRDI. Content type. Tout. Activités. Avis aux médias. Bulletins. Communiqués. Nouvelle ...

  2. Nouvelles et activités | Page 2 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Consultez les nouvelles et les activités. Utilisez cet outil de recherche pour trouver des nouvelles ou des activités précis dans le site Web du CRDI. Content type. Tout. Activités. Avis aux médias. Bulletins. Communiqués. Nouvelle ...

  3. Nouvelles et activités | Page 7 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Consultez les nouvelles et les activités. Utilisez cet outil de recherche pour trouver des nouvelles ou des activités précis dans le site Web du CRDI. Content type. Tout. Activités. Avis aux médias. Bulletins. Communiqués. Nouvelle ...

  4. Nouvelles et activités | Page 5 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Consultez les nouvelles et les activités. Utilisez cet outil de recherche pour trouver des nouvelles ou des activités précis dans le site Web du CRDI. Content type. Tout. Activités. Avis aux médias. Bulletins. Communiqués. Nouvelle ...

  5. Industrial uses of radioelements in France; Utilisation industrielle des radioelements en France

    Energy Technology Data Exchange (ETDEWEB)

    Gueron, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The birth of a nuclear industry has permitted the use of radioelements in an increasing number of domains. Currently, the majority of radioelements applications in industrial problematic are essentially on nondestructive control and on problems of static electricity, as well as in a least way for the use of the intense radiation sources, on agronomic problems, for hydrology or chemical analyses. In order to promote the industrial applications, The CEA took to this purpose several sets of decisions: 1 - institution of teachings and collaboration; 2 - encourage the constructors of devices; 3 - creation of a help service to the users. (M.B.) [French] La naissance d'une industrie nucleaire a permit l'emploi des radioelements dans un nombre croissant de domaines. Actuellement, la majorite des applications industrielles de radioelements porte essentielement sur le controle non destructif et les problemes d'electricite statique, ainsi que dans une moindre mesure l'utilisation des rayonnements intenses, les problemes agronomiques, les questions d'hydrologie, les analyses chimiques. Afin de promouvoir les applications industrielles, Le Commissariat a l'Energie Atomique a pris a cet effet plusieurs series de mesures: 1- institution d'enseignements et de collaboration; 2- encouragement aux constructeurs d'appareils; 3- creation d'un service de consultation aux usagers. (M.B.)

  6. Access. Challenge for Change/Societe Nouvelle Number Twelve.

    Science.gov (United States)

    Prinn, Elizabeth, Ed.; Henaut, Dorothy Todd, Ed.

    This issue of Access, the journal issued periodically by Challenge for Change/Societe Nouvelle, contains two groups of articles. The first focuses upon the Skyriver Project, relating how a project was developed which used film and video tape as a means of helping Alaskan communities to assess their own needs and to advocate for themselves the…

  7. Access. Challenge for Change/Societe Nouvelle Number Eleven.

    Science.gov (United States)

    Prinn, Elizabeth, Ed.

    Access is a journal published three or four times a year by Challenge for Change/Societe Nouvelle (CCSN). CCSN is an experimental program established by the Government of Canada as a cooperative effort between the National Film Board of Canada and certain of the Government's departments. Its purposes are to improve communications, create greater…

  8. Dismantling of nuclear facilities: the industrial know-how; Demantelement des installations nucleaires: les voies de la maitrise industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Lellament, R. [Societe Francaise d' Energie Nucleaire (SFEN), Groupe de Reflexion Energie/Environnement, 75 - Paris (France)

    2004-11-01

    Numerous nuclear facilities in laboratories or research reactors have been decommissioned and dismantled over the 2 last decades throughout the world. The valuable feedback experience has allowed nuclear industry to design, upgrade and test specific techniques for dismantling. These techniques are efficient although they have been validated on a reduced number of nuclear power plants. In France only 3 power units have been dismantled: Chinon A1, A2 and Brennilis (EL4) and they are not representative of the real park of EDF'reactors. 6 PWR-type reactors have already been dismantled in the Usa. The results of a survey concerning 26 countries shows that the dismantling cost is around 320 dollars/kWe, it represents 15% of the construction cost which is far from being excessive as it is often read in the media. The dismantling costs can be broken into: - de-construction (25-55%), - wastes from dismantling (17-43%), - security and monitoring (8-13%), - site reclamation (5-13%), and - engineering and project management (5-24%). (A.C.)

  9. Installing Omeka

    Directory of Open Access Journals (Sweden)

    Jonathan Reeve

    2016-07-01

    Full Text Available Omeka.net is a useful service for Omeka beginners, but there are a few reasons why you might want to install your own copy of Omeka. Reasons include: * Upgrades. By installing Omeka yourself, you can use the latest versions of Omeka as soon as they’re released, without having to wait for Omeka.net to upgrade their system. * Plugins and themes. You can install any plugin or theme you want, without being restricted to those provided by Omeka.net. * Customizations. You can buy a custom domain name, and customize your code to achieve your desired functionality. * Control. You have control over your own backups, and you can update the server yourself so that its security is always up-to-date. * Price. There are many low-cost Virtual Private Servers (VPSs now, some of which cost only $5 per month. * Storage. Many shared hosting providers now offer unlimited storage. This is useful if you have a large media library. In this tutorial, we’ll be entering a few commands on the command line. This tutorial assumes no prior knowledge of the command line, but if you want a concise primer, consult the Programming Historian introduction to BASH. There are other ways of installing Omeka, of course, some using exclusively GUI tools. Some hosting providers even offer “one-click installs” via their control panels. Many of those methods, however, will install older versions of Omeka which are then harder to upgrade and maintain. The method outlined below may not be the easiest way to install Omeka, but it will give you some good practice with using the command line, which is a skill that will be useful if you want to manually upgrade your install, or manually install other web frameworks. (For example, this installation method is very similar to WordPress’s “Five-Minute Install”. There are four steps to this process, and it should take about an hour.

  10. Jean Gadrey, Nouvelle économie, nouveau mythe ?

    Directory of Open Access Journals (Sweden)

    Diane-Gabrielle Tremblay

    2002-10-01

    Full Text Available La « nouvelle économie » est partout dans les médias nord-américains, comme européens. L’ouvrage de Jean Gadrey est rafraîchissant, car il présente une critique et une analyse minutieuse du concept, de son apparition, des développements qui y sont associés, des thèses et idées défendues au nom de la « nouvelle économie ».Comme il le note bien « les mythes mobilisateurs fleurissent, mais la réflexion sur les contours de cet âge et sur les risques sociaux à prévenir est inexistante : les formul...

  11. La hernie ombilicale africaine : nouvelle classification et revue de 30 ...

    African Journals Online (AJOL)

    L'objectif de ce travail était de proposer une nouvelle classification de la hernie ombilicale de l'enfant africain et d'évaluer les résultats du traitement chirurgical.Il s'agit d'une étude prospective portant sur 30 patients porteurs de hernie ombilicale, qui s'est déroulée sur une période de un an et demi dans les services de ...

  12. Nouvelle espèce des Syntomides (Lepidoptera Heterocera)

    NARCIS (Netherlands)

    Snellen, P.C.T.

    1886-01-01

    Quatre mâles frais et bien conservés de 58—64 millim. d’envergure. Cette nouvelle espèce, gigantesque pour une Syntomide, appartient au genre Automolis, tel qu’il a été défini par Herrich-Schäffer, dans son ouvrage »Sammlung aussereuropäischer Schmetterlinge” (p. 21); le nom est emprunté au bien

  13. Migration of hydrocarbons in the subsoil of an industrial installation; Migration d'hydrocarbures dans le sous-sol d'une installation industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Van Dorpe, F [CEA Cadarache, Dept. d' Entreposage et de Stockage des Dechets (DCC/DESD/SEP), 13 - Saint-Paul-lez-Durance (France); Centre National de Recherche sur les Sites et Sols Pollues (CNRSSP), 59 - Douai (France)

    2000-07-01

    The fate of old industrial sites is a major problem at the beginning of the new millennium for government organization, agencies owning polluted sites... These brown-field sites often generate considerable pollution of soils and groundwater, the main source of drinking water. The National Center for Research on Polluted Soils and Sites (CNRSSP), in which the CEA is an active partner, is developing a strategy to study and, using several scientific tools, characterize industrial sites polluted by various contaminants: metals, metalloids, hydrocarbons, nitrates. The present study offers an example of the investigation of an old industrial site (coke plant), built in 1919 (in operation for 50 years), located in northern France. The storage of tars and wastewaters on these sites causes soil and groundwater contamination with organic compounds such as Polycyclic Aromatic Hydrocarbons (PAHs), mono-aromatic hydrocarbons (benzene, toluene, ethyl-benzene and xylene BTEX), volatile organic compounds (VOCs), phenolic and other hydrocarbons, and inorganic compounds including metalloids (free and complexed cyanides) and metals (As, Pb, Ni, Cd and Hg). The more soluble constituents tend to migrate to adjacent areas with the groundwater flow and thereby reach receptors such as drinking water resources. Among the above pollutants, the 16 PAHs from the priority list of the Environmental Protection Agency (EPA) are of great environmental concern due to their toxic, mutagenic and carcinogenic properties. The remediation of PAH-polluted sites poses a crucial challenge given the large number of sites contaminated by these pollutants and the difficulty in eliminating the pollution. A better evaluation of the PAH transfer and transport in soils and aquifers will also help draw up remediation strategies. In this study, a numerical model, called SIMUSCOPP and developed by the French Petroleum Institute (IFP), BURGEAP and ENI group for organic pollutants, was used to simulate 3D transfer and transport of PAHs under an old coke plant, taking biodegradation and soil sorption into account. The simulation results discussed in this paper were obtained by assuming tar pollution 7 m deep underground to be the only source. This aquifer pollution in a chalky formation mainly consists of PAHs (naphthalene, fluoranthene, etc). A broad field investigation was conducted on the site by monitoring the water (16 piezometers, piezometric measurements, pollutant concentration analysis) to characterize the location and extent of the PAH plume. The numerical modeling was aimed to characterize PAH migration in the unsaturated and saturated zones and to assess the vulnerability of a drinking water well located downstream. The model helped estimate the time for dissolved naphthalene to reach steady state (20 years) and the plume dimensions (1200 m long, 300 m wide and 15 m thick). Simulation were performed of water samplings in piezometers inside and outside the polluted area and the naphthalene concentration in water samples was reproduced, in good agreement with real observations on boreholes of the site. However, for two piezometers located between the two lagoons of coal tars, a large contribution of a second source of PAH, enriched in PAHs with 2 or 3 rings and located at the base of aquifer, was identified in water samples, in the pumped water. This significant share of the pollution is not transported with groundwater flow, but only with water pumping. Thus SIMUSCOPP served to identify the dissolved phase of PAH and to quantify the rest of the pollution, possibly a colloidal phase. As a consequence, a new water sampling strategy could be developed in order to adjust the pump discharge, use specific filters, etc. The major conclusion of the transport simulation is that the PAH plume does not reach the drinking water well located 4 km downstream of the site. However, some remediation measures are necessary and the polluted soils are currently being excavated. (author)

  14. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination....... In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  15. Installation Art

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    . In Installation Art: Between Image and Stage, Anne Ring Petersen aims to change that. She begins by exploring how installation art developed into an interdisciplinary genre in the 1960s, and how its intertwining of the visual and the performative has acted as a catalyst for the generation of new artistic......Despite its large and growing popularity – to say nothing of its near-ubiquity in the world’s art scenes and international exhibitions of contemporary art –installation art remains a form whose artistic vocabulary and conceptual basis have rarely been subjected to thorough critical examination...... phenomena. It investigates how it became one of today’s most widely used art forms, increasingly expanding into consumer, popular and urban cultures, where installation’s often spectacular appearance ensures that it meets contemporary demands for sense-provoking and immersive cultural experiences. The main...

  16. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, Koen

    1988-01-01

    Border installations cover all nuclear plants located near the border with a neighbouring state. However, the actual distance depends on the context. The distance can vary considerably. Also the prohibition on siting near a heavily populated area also defines the actual distance variably. The distance criteria may be modified by other factors of topography, prevailing climate and so on. Various examples which illustrate the problems are given. For example, the Creys-Melville nuclear power plant is 80km from Geneva and the Cattonam installation is 12km from the French border with Luxembourg and Germany. The Cattenom case is explained and the legal position within the European Institutions is discussed. The French licensing procedures for nuclear power stations are described with special reference to the Cattenom power plant. Border installations are discussed in the context of European Community Law and Public International Law. (U.K.)

  17. Nuclear installations

    International Nuclear Information System (INIS)

    2001-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  18. Nuclear installations

    International Nuclear Information System (INIS)

    1998-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 2 of the document contains some details about the existing Brazilian nuclear installations. Also, safety improvements at Angra 1 and aspects of Angra 2 and 3 are reported

  19. La viticulture bio, une nouvelle modernité

    OpenAIRE

    Raphaël Schirmer

    2004-01-01

    Les difficultés d'expansion de la viticulture biologique en France proviennent avant tout de la rupture conséquente qu'elle introduit en ce qui concerne notre rapport à l'espace. La place de l'agriculteur dans la société est refondée, les paysages tels que nous les entendions sont bouleversés. Il semble bien qu'une nouvelle modernité soit en train de se développer, à côté de tant d'autres il est vrai.

  20. Nouvelle initiative des chaires de recherche Canada-Afrique du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    8 déc. 2016 ... Elles s'appuient sur le South African Research Chairs Initiative (SARChl), ainsi que sur le programme de chaires de recherche industrielle, dont le financement provient en partie du Conseil de recherches en sciences naturelles et en génie du Canada (CRSNG) et du Programme des chaires de recherche ...

  1. Test des photomultiplicateurs en silicium couplés à un scintillateur plastique pour la nouvelle Tape Station

    CERN Document Server

    sekal, Smain

    2014-01-01

    L’une des parties essentielles de la l’installation ISOLDE est la tape Station (contrôleur de bandes), qui permet la vérification de la qualité du faisceau délivré aux expériences. On prévoit à ISOLDE de remplacer l’ancienne Tape Station, par une nouvelle Tape station; et l’un des paramètres essentiels pour la performance de la tape Station est l’efficacité de détection. Le but de ce travail est de vérifier l’efficacité des détecteurs de particules bêta, composés par l’association des photomultiplicateurs en Silicium à un scintillateur plastique pour differentes distances.

  2. Imminent perspectives for industrial application of atomic energy; Perspectives imminentes de l'application industrielle de l'energie atomique

    Energy Technology Data Exchange (ETDEWEB)

    Kowarski, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    This conference raises an inventory of industrial applications and their perspectives for the year 1955. The speaker extrapolate for the forthcoming years the evolution of the role of the nuclear, the nuclear fuel, the different, types of atomic reactors and the state of advancement for different countries. (M.B.) [French] Cette conference dresse un etat des lieux des applications industrielles et de leurs perspectives pour l'annee 1955. L'orateur aborde entre autre l'evolution du role du nucleaire dans les annees a venir, le combustible nucleaire, les differents types de piles atomiques et l'etat d'avancement des differents pays. (M.B.)

  3. Border installations

    International Nuclear Information System (INIS)

    Lenaerts, K.

    1988-01-01

    This chapter highlights the legal problems raised by the concept of a border installation. Using the Cattenom nuclear power plant as an example, the author describes the different stages of the legal conflict raised by construction of the plant and analyses the relationship between French administrative law and some provisions of the Euratom Treaty. Based on the Treaty, the Community institutions have adopted directives to strengthen inter-State co-operation and consultation between neighbouring countries. He observes that these principles of co-operation, consultation and vigilance already exist in public international law; however, international case law has not yet made it possible to establish the strict liability of the constructing state in case of a nuclear accident (NEA) [fr

  4. Studies and activities in the field of chemical toxicology carried out by the service d'hygiene industrielle

    International Nuclear Information System (INIS)

    Chalabreysse, J.; Archimbaud, M.; Teulon, F.

    1988-02-01

    The Service d'Hygiene Industrielle (Industrial hygiene service, Institute of protection and nuclear safety, Department of health protection - IPSN-DPS) has acquired an unquestionable proficiency in chemical toxicology on account of 1) its missions of research on and monitoring of workers, working conditions and the environment on the Tricastin industrial complex and 2) of its actions of technical assistance to the CEA group and of valorization outside the group. The report presents how toxicological hazards originated from the use of chemical products by the nuclear industry are taken into consideration. A global methodology of assessment of chemical-toxicological hazards has been developed; it is based on the experience gained in various occupational branches (nuclear and non-nuclear industry, agriculture, administrations,...). The Service d'hygiene industrielle is developing R and D studies in the field of biology and analytical chemistry based on the present knowledge and doctrine in radiotoxicology (uranium especially). The contribution of radiation protection and radiotoxicology to non-nuclear industrial hygiene can thus be appreciated [fr

  5. LHC 2008 lectures "Une nouvelle vision du monde"

    CERN Multimedia

    2008-01-01

    The history of the science of the Universe and the science of matter have been marked by a small number of "revolutions" that have turned our understanding of the infinitesimally large and the infinitesimally small on its head. New ways of looking at the world have come about sometimes through conceptual advances and sometimes through innovations in scientific instrumentation. How do things stand at the beginning of the 21st century? Will today’s large-scale machine projects like the LHC and gravitational wave detectors pave the way for a new scientific revolution? Thursday, 15 May 2008 at 8.00 p.m. Une nouvelle vision du monde Jean-Pierre Luminet, Research Director at the CNRS The Globe, first floor No specialist knowledge required. Entrance free. To reserve call + 41 (0) 22 767 76 76 http://www.cern.ch/globe

  6. NOUVELLES PERSPECTIVES EN ONCOLOGIE MEDICALE MEDECINE MOLECULAIRE ET SES PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Jean-Yves BLAY

    2017-05-01

    Full Text Available La médecine  moléculaire du cancer  s’appuie sur l’identification d’anomalies génomique de  l’ADN des cellules tumorales, permettant de guider le traitement des patients, en choisissant des inhibiteurs agissant sur les protéines mutées codées par les gènes mutés. Cependant, on assiste depuis 10 ans à l’émergence très rapide d’un nouveau corpus de connaissance décrivant les anomalies génomiques des cellules cancéreuses au sein des programmes internationaux  comme ICGC ou TCGA, permettant de déboucher sur de nouvelles classifications nosologiques mais démontrant aussi l’extrème  complexité et variabilité clonale des cellules cancéreuses  chez le patient humain. Il s’agit désormais d’utiliser ces données  nouvelles de manière  efficace. Ceci requiert la constitution de plateformes de diagnostic  explorant progressivement avec  une plus grande profondeur  les anomalies moléculaire de chaque patient individuel, et l’organisation de réunions de concertation pluridisciplinaires moléculaire permettant d’intégrer ces données au contexte  clinique et global du patient, et requérant la  contribution  croissante des bio-informaticiens. Ce  court article  fait le point  sur l’évolution de cette médecine moléculaire.

  7. Purification and concentration of uranium-bearing solutions at the plants of the Societe industrielle des minerais de l'Ouest

    International Nuclear Information System (INIS)

    Vollerin, G.

    1980-01-01

    The author describes the various processes for purification of uranium-bearing solutions used at the plants of the Societe industrielle des minerais de l'Ouest (SIMO) from their commissioning up to the present time, together with the purification circuit adopted at the two plants at present operating in Niger. (author)

  8. Présentation d'une boucle prototype de pompe à chaleur à absorption haute température industrielle de 100 kW Description of a 100-Kw Prototype Loop for an Industrial High-Temperature Absorption Heat-Pump

    Directory of Open Access Journals (Sweden)

    Thomas D.

    2006-11-01

    Full Text Available II apparait indispensable, dans le contexte énergétique actuel, de mettre au point de nouvelles techniques de revalorisation d'énergie. Les pompes à chaleur à absorption peuvent, dans certains secteurs industriels, apporter des solutions particulièrement intéressantes par rapport aux pompes à chaleur à compression notamment, en particulier dans le domaine des hautes températures de revalorisation (120-150 °C. Pour mener à bien les études entreprises sur ce thème, le Gaz de France travaille en étroite collaboration avec l'Institut du Génie Chimique de Toulouse et la Société Creusot-Loire. Dans une première partie, les auteurs rappellent les principes de fonctionnement des pompes à chaleurs à absorption et leurs caractères spécifiques. Quelques exemples d'applications industrielles sont proposés. Ils présentent, dans une deuxième partie, la boucle prototype de 100 kW qui a été réalisée et décrivent ses caractéristiques, son cycle de fonctionnement et le programme des essais. Ce pilote de taille semi-industrielle utilise le couple eau-bromure de lithium. La définition d'un prototype industriel de pompe à chaleur à absorption haute température et les compléments de recherche entrepris dans ce domaine constituent la troisième partie de la communication. In the present energy context, it seems absolutely necessary to develop new techniques for energy upgrading. In some industrial sectors, absorption heat pumps may bring particularly interesting solutions compared, in particular, to compression heat pumps, especially in the field of high-temperature upgrading (120-150°C. Reasearch is being done in this field by Gaz de France in close collaboration with the Institut du Génie Chimique in Toulouse and with Creusot-Loire. ,The first part of this article reviews the operating principles of absorption heat pumps and their specific features. Some examples of industrial applications are then proposed. The second part

  9. EDF Energies Nouvelles. Consolidated financial statements at 31 December 2008 Prepared in accordance with IFRSs

    International Nuclear Information System (INIS)

    2009-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles's registration document for the year 2008. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, employees, shareholders, etc. The document includes the group's consolidated financial statements at 31 December 2008

  10. EDF Energies Nouvelles. Consolidated financial statements at 31 December 2007 Prepared in accordance with IFRSs

    International Nuclear Information System (INIS)

    2008-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles's registration document for the year 2007. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, employees, shareholders, etc. The document includes the group's consolidated financial statements at 31 December 2007

  11. EDF Energies Nouvelles. Consolidated financial statements at 31 December 2006 Prepared in accordance with IFRSs

    International Nuclear Information System (INIS)

    2007-01-01

    EDF Energies Nouvelles is a world leader in renewable energy electricity. The company develops, builds and operates clean energy power plants both for its own account and for third parties. Historically, EDF Energies Nouvelles primarily developed its business in two geographical areas, Europe and North America (U.S., Canada and Mexico). EDF Energies Nouvelles is a subsidiary of EDF, helping the Group to achieve its renewable energy goals. The EDF Group generates low-carbon electricity around the world and actively participates in the energy transition. EDF Energies Nouvelles prioritizes development of wind and photovoltaic solar capacity. As an integrated operator with global reach, EDF Energies Nouvelles covers the entire renewable energy chain, from development to operation and maintenance, and manages all project phases in-house. This document is EDF Energies Nouvelles's registration document for the year 2006. It contains information about Group profile, governance, business, investments, property, plant and equipment, management, financial position, employees, shareholders, etc. The document includes the group's Consolidated financial statements at 31 December 2006

  12. Entwicklung der Reglementierung von 10 MEM-Berufen im Kontext von Bildungsreformen und dem Wandel in der Arbeitswelt: Eine Kurzstudie im Auftrag von LIBS: Eine Kurzstudie im Auftrag von LIBS Industrielle Berufslehren Schweiz, Baden

    OpenAIRE

    Egg, Maria Esther; Renold, Ursula

    2015-01-01

    Im Auftrag der LIBS Industrielle Berufslehren Schweiz, hat die KOF die Entwicklung von 10 MEM1-Berufsbildern seit dem ersten Berufsbildungsgesetz dargestellt und diese eingebettet in eine kurze Zusammenfassung der wichtigsten Etappenschritte des Schweizer Berufsbildungssystems.

  13. Le programme ARTEMIS : nouvel outil pour la datation radiocarbone AMS (Spectromètre de Masse par Accélérateur et nouvelles problématiques

    Directory of Open Access Journals (Sweden)

    Cyrille Billard

    2012-04-01

    Full Text Available La mise en route du nouvel équipement ARTEMIS (Accélérateur pour la Recherche en sciences de la Terre, Environnement, Muséologie, Implanté à Saclay à partir de 2004 ouvre de nouvelles perspectives scientifiques et conduit à de nouvelles procédures de soumission des échantillons destinés à une datation 14C. Le MCC dispose aujourd’hui de droits alloués aux services régionaux de l'archéologie, services du ministère de la Culture, confrontés à ce type de demandes (musées, monuments historiques. Il impose désormais une nouvelle démarche de programmation scientifique des datations, associant une analyse critique des demandes.Since 2004, the availability at Saclay of a new ARTEMIS installation (Accélérateur pour la Recherche en sciences de la Terre, Environnement, Muséologie has opened new scientific perspectives and led to new procedures for submitting samples for carbon-14 dating. The French Ministry of Culture has the possibility of using this tool for radiocarbon dating at the request of its regional archaeological services or other services, such as museums and the historic monuments administration. This use now implies a new approach to the scientific planning for dating problems, associated with a critical analysis of the requests.

  14. L’écologie industrielle : quand l’écosystème industriel devient un vecteur du développement durable

    Directory of Open Access Journals (Sweden)

    Arnaud Diemer

    2007-08-01

    Full Text Available L’écologie industrielle, définie par Robert Frosch (1995 comme « l’ensemble des pratiques destinées à réduire la pollution industrielle », nous amène à penser que l’écosystème industriel peut être un véritable vecteur du développement durable. L’ingénierie écologique et l’écotechnologie recommandent aux industriels de procéder à un ensemble d’opérations de rationalisation de la production (optimisation des consommations énergétiques et matérielles, minimisation des déchets à la source,réutilisation des rejets pour servir de matières premières à d’autres processus de production. Les symbioses industrielles et les parcs éco-industriels sont généralement présentés comme des modèles de rationalisation industrielle et des illustrations tangibles du développement durable.Industrial ecology is defined by Robert Frosch (1995 as practices intended to reduce industrial pollution. That leads us to think industrial ecosystem as a vector of sustainable development.Ecological engineering and ecotechnology recommend managers to rationalize the production process (optimization of material consumptions, minimization of bads…. Industrial symbiosis and industrial parks are generally presented as models of industrial rationalization and tangible illustrations of the sustainable development.

  15. Costs of fuel cycle industrial facilities: an international review; Couts des installations industrielles du cycle du combustible point a l'international

    Energy Technology Data Exchange (ETDEWEB)

    Macias, R.M

    2004-07-01

    This document presents, comments, and compares economic and financial data for industrial facilities concerning different aspects of the nuclear fuel cycle. It first comments the present situation and the short term trends for the natural uranium market, the conversion market, the enrichment market, the reprocessing market, the storage market. It gives an assessment of the elementary costs of the existing facilities for the different stages and processes: reprocessing, spent fuel warehousing (example of the CLAB in Sweden and comparison with other available data), warehousing of all types of wastes (examples of Habog in Netherlands, Zwilag in Switzerland), spent fuel storage (example of Yucca Mountain in the USA, Onkalo in Finland, projects and studies in Sweden), storage of vitrified wastes in Belgium, storing of transuranic wastes in the USA, storage of low and intermediate level and short life wastes in Sweden.

  16. Strong explosions impact on buildings representative of an industrial facility; Impact de fortes explosions sur les batiments representatifs d'une installation industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Trelat, S

    2006-12-15

    The goal of this study is to focus on the analysis of blast wave damage to structures when blast wave is consequence of explosive charge detonation. The objective is to propose useful tools to predict charges on structure. All experiences are realized in laboratory. The experimental investigation consists in simulating a detonation of a stoichiometric propane-oxygen mixture at ground level or at higher altitude. The study is going to give us experimental data on blast wave effects on a structure. For that, two types of structures frequently found on industrial site are going to be used: a parallelepipedal structure and a cylindrical structure, both with known dimensions. Finally, the important point of the problem is to determine an energetic equivalence between TNT and gas used in the experiments, in order to model TNT explosions at full scale by gaseous explosions at reduced scale. (author)

  17. Application des ondelettes à l'analyse de texture et à l'inspection de surface industrielle

    Science.gov (United States)

    Wolf, D.; Husson, R.

    1993-11-01

    This paper presents a method of texture analysis based on multiresolution wavelets analysis. We discuss the problem of theoretical and experimental choice of the wavelet. Statistical modelling of wavelet images is treated and it results in considering statistical distribution to be a generalized Gaussian law. An algorithm for texture classification is developed with respect of the variances of different wavelet images. An industrial application of this algorithm illustrates its quality and proves its aptitude for automation of certain tasks in industrial control. Nous présentons une méthode d'analyse de texture fondée sur l'analyse multirésolution par ondelettes. Nous discutons du problème du choix théorique et expérimental de l'ondelette. Le problème de la modélisation statistique des images d'ondelettes est traité et aboutit à considérer la distribution statistique comme une loi de Gauss généralisée. Un algorithme de classification de texture est construit à l'aide de la variance des différentes images d'ondelettes. Enfin, une application industrielle de cet algorithme illustre ses qualités et démontre son aptitude à l'automatisation de certaines tâches de contrôle industriel.

  18. Nouvelles et activités | Page 6 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Jean Lebel, président du CRDI, et Andrew Campbell, premier dirigeant de l'. CRDI. NOUVELLES ACTIVITÉS. Le CDRI renouvelle son partenariat avec ACIAR en matière de sécurité alimentaire. Le CRDI et le Australian Centre for International Agricultural Research, ont conclu un accord en... Vous voulez en savoir plus Le ...

  19. Synthèse, étude toxicologique et activité psychotrope de nouvelles ...

    African Journals Online (AJOL)

    Hilaire

    Pharmacology. Synthèse, étude toxicologique et activité psychotrope de nouvelles arylidènpyridazin-. 3-ones N-substituées. Adnane BENMOUSSA1*, Pascal Manuele KANYONGA2,3, M'Hammed ANSAR1, Amina ZELLOU2, J EL. HARTI1, Jamal LAMSAOURI1, My Abbes FAOUZI2 , Ahmed ZAHIDI1, Hamid BENZIANE1, ...

  20. Une nouvelle vision pour AfricaAdapt – Entrevue avec Moussa Na ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    24 févr. 2011 ... Réseau panafricain lancé en mai 2009, AfricaAdapt vient de recevoir le feu vert pour l'exécution d'une nouvelle phase d'activités de deux ans, qu'appuie le programme Adaptation aux changements climatiques en Afrique.

  1. Performances d'une nouvelle approche dans l'estimation au champ

    African Journals Online (AJOL)

    ACSS

    Elle possède cependant des limitations, dues à l'organisation temporaire d'une .... Performances d'une nouvelle approche dans l'estimation au champ utilisant le principe de la ... différents types de résidus (soja, luzerne, haricot et maïs) et ...

  2. Régler les conflits locaux en Amérique latine : de nouvelles ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Au cours de la dernière décennie, les conflits locaux se sont répandus dans toute ... conjuguées à de nouvelles façons de concevoir la nature des conflits locaux. ... En partenariat avec l'Organization for Women in Science for the Developing ...

  3. IFP Energies Nouvelles. 2014 Activity report - Innovating for energy

    International Nuclear Information System (INIS)

    2015-01-01

    As part of the public-interest mission with which it has been tasked by the public authorities, IFP Energies Nouvelles (IFPEN) focuses on: - providing solutions to take up the challenges facing society in terms of energy and the climate, promoting the emergence of a sustainable energy mix, - creating wealth and jobs by supporting French and European economic activity, and the competitiveness of related industrial sectors. Despite the current economic environment, 2014 was a good year for IFPEN. In the field of renewable energies, major milestones were reached in two significant projects dedicated to the production of second generation biofuels in which IFPEN is very actively involved: processes developed in Futurol TM are already in the pre-marketing phase, while the construction of the two pilot units for the BioTfueL project has just been launched. In the field of ocean energies, IFPEN research has led to the first partnership agreements relating to floating wind turbines anchor technologies and command control systems for wind energy and wave energy conversion. In the transport sector, game-changing concepts are beginning to emerge, such as smart battery charging and a Rankine cycle system for an internal combustion engine transforming combustion heat into energy. In addition, IFPEN have joined forces with innovative SMEs to boost their research in the fields of electric power-trains and power electronics. Finally, IFPEN launched an eco-driving application that has proved extremely popular with the public. Turning now to oil and gas, IFPEN continued to expand its range of basin and reservoir simulation, modeling and characterization software, and it signed several contracts in the field of chemical enhanced recovery solutions with its EOR (Enhanced Oil Recovery) Alliance TM partners. IFPEN also developed new generations of high-performance catalysts and improved the conversion rate of its processes to enable refiners to convert increasingly heavy crudes and

  4. IFP Energies nouvelles. 2016 Activity Report - Innovating for energy

    International Nuclear Information System (INIS)

    2017-01-01

    IFP Energies Nouvelles is a major research and training player in the fields of energy, transport and the environment. From research to industry, technological innovation is central to all its activities, structured around three strategic priorities: sustainable mobility, new energies and responsible oil and gas. As part of the public-interest mission with which it has been tasked by the public authorities, IFPEN focuses on: - providing solutions to take up the challenges facing society in terms of energy and the climate, promoting the transition towards sustainable mobility and the emergence of a more diversified energy mix; - creating wealth and jobs by supporting French and European economic activity, and the competitiveness of related industrial sectors. An integral part of IFPEN, its graduate engineering school - IFP School - prepares future generations to take up these challenges. IFPEN has proven expertise across the entire value chain, from fundamental research to innovation. It is funded both by a state budget and by its own resources provided by industrial partners. The latter account for over 50% of IFPEN's total budget, a configuration that is quasi unique in France. The aim of IFPEN's R and I programs is to overcome existing scientific and technological challenges in order to develop innovations that can be used by industry. IFPEN's fundamental research program aims to create a bedrock of knowledge essential for the development of innovations. The scientific expertise of IFPEN's researchers is internationally recognized and they are regularly consulted by the public authorities to provide their insight in their specific fields to inform the decision-making process. IFPEN's economic model is based on the transfer to industry of the technologies developed by its researchers. This technology transfer to industry generates jobs and business, fostering the economic development of fields and approaches related to the mobility, energy and eco-industry sectors

  5. Nouvelle methode d'integration energetique pour la retro-installation des procedes industriels et la transformation des usines papetieres

    Science.gov (United States)

    Bonhivers, Jean-Christophe

    The increase in production of goods over the last decades has led to the need for improving the management of natural resources management and the efficiency of processes. As a consequence, heat integration methods for industry have been developed. These have been successful for the design of new plants: the integration principles are largely employed, and energy intensity has dramatically decreased in many processes. Although progress has also been achieved in integration methods for retrofit, these methods still need further conceptual development. Furthermore, methodological difficulties increase when trying to retrofit heat exchange networks that are closely interrelated to water networks, such as the case of pulp and paper mills. The pulp and paper industry seeks to increase its profitability by reducing production costs and optimizing supply chains. Recent process developments in forestry biorefining give this industry the opportunity for diversification into bio-products, increasing potential profit margins, and at the same time modernizing its energy systems. Identification of energy strategies for a mill in a changing environment, including the possibility of adding a biorefinery process on the industrial site, requires better integration methods for retrofit situations. The objective of this thesis is to develop an energy integration method for the retrofit of industrial systems and the transformation of pulp and paper mills, ant to demonstrate the method in case studies. Energy is conserved and degraded in a process. Heat can be converted into electricity, stored as chemical energy, or rejected to the environment. A systematic analysis of successive degradations of energy between the hot utilities until the environment, through process operations and existing heat exchangers, is essential in order to reduce the heat consumption. In this thesis, the "Bridge Method" for energy integration by heat exchanger network retrofit has been developed. This method is the first that considers the analysis of these degradations. The fundamental mechanism to reduce the heat consumption in an existing network has been made explicit; it is the basis of the developed method. The Bridge Method includes the definition of "a bridge", which is a set of modifications leading to heat reduction in a heat exchanger network. It is proven that, for a given set of streams, only bridges can lead to heat savings. The Bridge Method also includes (1) a global procedure for heat exchanger network retrofit, (2) a procedure to enumerate systematically the bridges, (3) "a network table" to easily evaluate them, and (4) an "energy transfer diagram" showing the effect of the two first principles of thermodynamics of energy conservation and degradation in industrial processes in order to identify energy savings opportunities. The Bridge Method can be used for the analysis of networks including several types of heat transfer, and site-wide analysis. The Bridge Method has been applied in case studies for retrofitting networks composed of indirect-contact heat exchangers, including the network of a kraft pulp mill, and also networks of direct-contact heat exchangers, including the hot water production system of a pulp mill. The method has finally been applied for the evaluation of a biorefinery process, alone or hosted in a kraft pulp mill. Results show that the use of the method significantly reduces the search space and leads to identification of the relevant solutions. The necessity of a bridge to reduce the inputs and outputs of a process is a consequence of the two first thermodynamics principles of energy conservation and increase in entropy. The concept of bridge alone can also be used as a tool for process analysis, and in numerical optimization-based approaches for energy integration.

  6. Nuclear Installations Act 1965

    International Nuclear Information System (INIS)

    1965-01-01

    This Act governs all activities related to nuclear installations in the United Kingdom. It provides for the licensing procedure for nuclear installations, the duties of licensees, the competent authorities and carriers of nuclear material in respect of nuclear occurrences, as well as for the system of third party liability and compensation for nuclear damage. The Act repeals the Nuclear Installations (Licensing and Insurance) Act 1959 and the Nuclear Installations (Amendment Act) 1965 except for its Section 17(2). (NEA) [fr

  7. Installation report - Lidar

    DEFF Research Database (Denmark)

    Georgieva Yankova, Ginka; Villanueva, Héctor

    The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project.......The report describes the installation, configuration and data transfer for the ground-based lidar. The unit is provided by a customer but is installed and operated by DTU while in this project....

  8. The Upgraded Plasma Focus Installation > - The Installation >

    International Nuclear Information System (INIS)

    Krokhin, O.N.; Nikulin, V.Ya.; Babenko, B.A.; Gorbunov, D.N.; Gurei, A.E.; Kalachev, N.V.; Kozlova, T.A.; Malafeev, Yu.S.; Polukhin, S.N.; Sychev, A.A.; Tikhomirov, A.A.; Tsybenko, S.P.; Volobuev, I.V.

    1999-01-01

    The paper presents the upgraded plasma focus installation > - the installation > and some preliminary experimental results. The total energy stored in capacity bank is now 400 kJ, current - 5 MA with the rise time 3.5 μs. The investigation is targeted on the study of near electrode processes and its influence on plasma dynamics in a special operating regime of Filippov type PF - Hard X-ray regime. (author)

  9. Apparatus for examination of irradiated fuel elements of industrial reactors at Marcoule; Appareillage d'examen des elements combustibles des piles industrielles de Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Pesenti, P; Wallet, Ph [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors describe a viewing and measurement cell for the slugs of Marcoule industrial reactors. This cell allows visual inspection, and photography of slugs. Length measurements are also made possible by horizontal motion of the slug both in translation and rotation. (author) [French] Les auteurs decrivent une cellule d'observation et de mesure des elements combustibles des piles industrielles de Marcoule. La cellule permet l'examen a vue, la photographie, la radioscopie et la radiographie des elements combustibles. Elle permet en outre la mesure de longueurs sur ces elements, ces derniers pouvant etre deplaces horizontalement en translation, et en rotation. (auteur)

  10. THz waves: biological effects, industrial and medical; Les ondes THz: effets biologiques, applications industrielles et medicales

    Energy Technology Data Exchange (ETDEWEB)

    Coutaz, J.L.; Garet, F. [Universite de Savoie au Bourget du Lac, IMEP-LAHC, UMR CNRS 5130, 73 (France); Le Drean, Y.; Zhadobov, M. [Institut d' Electronique et des Telecommunications de Rennes, 35 (France); Veyret, B. [I.M.S., 33 - Pessac (France); Mounaix, P. [Laboratoire Ondes et Matiere d' Aquitaine, Universite de Bordeaux, 1 UMR 5798, 33 - Talence (France); Caumes, J.P. [ALPhANOV, 33 - Bordeaux (France); Gallot, G. [Ecole Polytechnique, Laboratoire d' Optique et Biosciences, CNRS UMR 7645, INSERM U696, 91 - Palaiseau (France); Gian Piero, Gallerano [ENEA, Frascati (Italy); Mouret, G. [Universite du Littoral Cote d' Opale - ULCO, 59 - Dunkerque (France); Guilpin, J.C. [Direction Generale de l' Aviation Civile, 94 - Bonneuil sur Marne (France)

    2011-07-01

    Following the debates about body scanners installed in airports for passengers security control, the non-ionizing radiations (NIR) section of the French radiation protection society (SFR) has organized a conference day to take stock of the present day knowledge about the physical aspects and the biological effects of this frequency range as well as about their medical, and industrial applications (both civil and military). This document gathers the slides of the available presentations: 1 - introduction and general considerations about THz waves, the THz physical phenomenon among NIR (J.L. Coutaz); 2 - interaction of millimeter waves with living material: from dosimetry to biological impacts (Y. Le Drean and M. Zhadobov); 3 - Tera-Hertz: standards and recommendations (B. Veyret); 4 - THz spectro-imaging technique: status and perspectives (P. Mounaix); 5 - THz technology: seeing the invisible? (J.P. Caumes); 6 - Tera-Hertz: biological and medical applications (G. Gallot); 7 - Biological applications of THz radiation: a review of events and a glance to the future (G.P. Gallerano); 8 - Industrial and military applications - liquids and solids detection in the THz domain (F. Garet); 9 - THz radiation and its civil and military applications - gas detection and quantifying (G. Mouret); 10 - Body scanners and civil aviation security (J.C. Guilpin, presentation not available). (J.S.)

  11. Toxoplasmose : une nouvelle approche vaccinale à base de nanoparticules d’amidon donne des résultats prometteurs

    OpenAIRE

    Le Rouzic, Jacques

    2015-01-01

    Pour lutter contre la toxoplasmose chez les ovins, des chercheurs de l’INRA, de l’Université de Tours et de la Faculté de Médecine de Lille ont développé une nouvelle approche vaccinale, utilisant des nanoparticules d’amidon et une administration par voie muqueuse. Cette approche ouvre de nouvelles perspectives vers des vaccins plus sûrs et plus efficaces.

  12. L’Observatoire numérique Nouvelle-Calédonie

    Directory of Open Access Journals (Sweden)

    Charlotte Ullmann

    2013-06-01

    Full Text Available Ses missions consistent à observer le développement numérique et favoriser l’animation territoriale des acteurs en Nouvelle-Calédonie. Parrainée par l’association calédonienne pour les technologies de l’information et de la communication (ACTIC et le ministère en charge de l’économie numérique du Gouvernement de Nouvelle-Calédonie nommé depuis mai 2009, une mission d’étude a été menée depuis juin 2010 pour définir les contours d’un Observatoire numérique. A travers cette étude, il s’agissai...

  13. LHC installation planning

    CERN Document Server

    Weisz, S

    2005-01-01

    installation of the general services, the installation of the cryogenic line (QRL), the installation of the machine elements and the hardware commissioning. While the installation of the general services is now almost finished (see presentation by Katy Foraz and Serge Grillot), several problems and delays with the QRL made it unavoidable to revise the installation strategy and to schedule a number tasks in parallel. A new compressed installation planning has been issued, that fulfils the strategic objectives and allows starting new activities with minimal delays in sectors 7-8 and 8-1. However, the shortcuts that are introduced increase the level of risk that we will have to face and the coordination of such a large and complex variety of simultaneous activities makes the project even more challenging. The document will describe how the input from the different equipment groups is taken into account by the master schedule planning team with respect to equipment availability and production as well as logistics...

  14. Description d’une espèce nouvelle du genre Ectatorhinus (Coleoptera: fam. Curculionidae)

    NARCIS (Netherlands)

    Roelofs, W.

    1890-01-01

    Monsieur Neervoort van de Poll ayant reçu récemment avec d’autres insectes une nouvelle espèce d’ Ectatorhinus, capturée dans l’intérieur de Bedagei (Deli, Sumatra orient.) par M. J. Z. Kannegieter, m’a invité de la décrire, ce que je fais avec d’autant plus de plaisir que j’avais décrit dans le

  15. Une Cyathura cavernicole nouvelle de Sarawak – Kalimantan du Nord (Isopoda, Anthuridae)

    NARCIS (Netherlands)

    Andreev, Stoitze

    1982-01-01

    A l’occasion d’une expédition spéléologique effectuée en 1978 à Sarawak et organisée par la Royal Geographical Society, le biospéléologue anglais Dr. Ph. Chapman a recueilli quelques exemplaires d’un Isopode des eaux douces souterraines, appartenant à une nouvelle espèce du genre Cyathura. La

  16. Nouvelles et activités | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Restez informé. Soyez au courant des toutes dernières nouvelles au sujet des programmes et des activités du CRDI, de ses réalisations et de celles des chercheurs que nous subventionnons. Apprenez-en plus sur les événements à venir au Canada et dans nos régions ou obtenez des renseignements sur les conférences, ...

  17. Une nouvelle vision de la transition en Syrie | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Une nouvelle vision de la transition en Syrie. 07 juin 2016. Bénéficiaire : Syrian Center for Political and Strategic Studies (SCPSS) Période visée : de juillet 2012 à août 2013. État : en cours de clôture. Financement accordé : 441 000 CAD. La Coalition nationale syrienne a officiellement donné son aval à une feuille de route ...

  18. Nouvelles de l'Italie sur la linguistique et l'education

    Directory of Open Access Journals (Sweden)

    Raffaele Simone

    1984-12-01

    Full Text Available L'auteur donne. des informations sur l'état actuel des débats concernant le développement du langage dans l'école italienne d'aujourd'hui, et prop6se U:ne "nouvelle" notion de linguistique appliquée, considérée en tant que confrontation de systèmes de sens, plutôt de systèmes de formes.

  19. DESIGNOR: une méthode nouvelle d'aide à la conception des produits industriels

    OpenAIRE

    Choffray, Jean-Marie

    1980-01-01

    Cet article présente une méthode nouvelle, appelée DESIGNOR, d'aide à la décision marketing. Son objectif est d'accroître la créativité au cours du processus de développement d'un nouveau produit industriel et de réduire les risques d'échec commercial.

  20. Electrical installation calculations basic

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for basic electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practice. A step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3Fo

  1. Electrical installation calculations advanced

    CERN Document Server

    Kitcher, Christopher

    2013-01-01

    All the essential calculations required for advanced electrical installation workThe Electrical Installation Calculations series has proved an invaluable reference for over forty years, for both apprentices and professional electrical installation engineers alike. The book provides a step-by-step guide to the successful application of electrical installation calculations required in day-to-day electrical engineering practiceA step-by-step guide to everyday calculations used on the job An essential aid to the City & Guilds certificates at Levels 2 and 3For apprentices and electrical installatio

  2. Electrical installations and regulations

    CERN Document Server

    Whitfield, J F

    1966-01-01

    Electrical Installations and Regulations focuses on the regulations that apply to electrical installations and the reasons for them. Topics covered range from electrical science to alternating and direct current supplies, as well as equipment for providing protection against excess current. Cables, wiring systems, and final subcircuits are also considered, along with earthing, discharge lighting, and testing and inspection.Comprised of 12 chapters, this book begins with an overview of electrical installation work, traits of a good electrician, and the regulations governing installations. The r

  3. Règle d'installation vidéosurveillance

    CERN Document Server

    2011-01-01

    Ce référentiel définit les exigences techniques minimales applicables aux systèmes de vidéosurveillance, avec des caméras implantées à l’intérieur ou l’extérieur. Il donne des recommandations pour concevoir, installer et maintenir des systèmes de vidéosurveillance dans des applications de sécurité. Pour une vidéosurveillance efficace, on pourra appliquer la méthodologie proposée : comment réaliser l’analyse de risque ? Quel rôle attribuer au système de vidéosurveillance ? quel système mettre en place, avec quelles fonctions et quelles caractéristiques techniques ? comment réaliser l’installation ? comment assurer la maintenance du système ? Cette nouvelle édition a notamment pour objectifs de : compléter les rôles de la vidéosurveillance (gestion d'activité) ; clarifier la définition des objectifs de prise de vue ; inclure l'utilisation d'une cible normalisée pour la réception de l'installation ; mettre à disposition un outil d'aide pour les petits systèmes ;...

  4. Reconversion écologique et socialisation des retraites : pour une politique industrielle du XXIe siècle

    Directory of Open Access Journals (Sweden)

    Gilles L. Bourque

    2011-11-01

    Full Text Available Cet article présente une analyse des scénarios possibles au Québec pour assurer la reconversion écologique du secteur des transports collectifs. La réflexion sur l'avenir des politiques industrielles doit en effet intégrer l'impact des changements climatiques et de la réduction de la disponibilité des énergies fossiles. Au Québec, le modèle de développement a toujours intégré la question de l'indépendance énergétique, et plus récemment des énergies renouvelables, à la réflexion sur le modèle de développement. L'apport de la recherche consiste à évaluer, dans une perspective globale pour l'ensemble du secteur et pour le Québec dans son ensemble, les enjeux de l'électrification du transport collectif, autant à l'intérieur des agglomérations que pour le transport entre les pôles régionaux. L'analyse des enjeux de l'électrification du transport collectif porte également sur les modes de financement possibles à l'intérieur du système de retraite au Québec, que ce soit dans le cadre actuel des politiques de placement des régimes de retraite ou encore à travers la création d'outils financiers particuliers comme cela a été fait dans d'autres pays.This article presents a coherent scenario to provide ecological transition of public transport in order to escape from the dependency on non-renewable energy sources. This transition is an important matter for industrial economics and public policy because sectoral level analysis is usually the most effective one. In Québec, the model of development has taken into account for a long time the issue of energetic independence through renewable energy and its impact on industries. This article offers a global evaluation of the costs and financing process for the transition towards electric public transport in large cities and between them. It also shows that it is possible to secure the funds through pension funds investment policy and the creation of green bonds that are

  5. 3D Projection Installations

    DEFF Research Database (Denmark)

    Halskov, Kim; Johansen, Stine Liv; Bach Mikkelsen, Michelle

    2014-01-01

    Three-dimensional projection installations are particular kinds of augmented spaces in which a digital 3-D model is projected onto a physical three-dimensional object, thereby fusing the digital content and the physical object. Based on interaction design research and media studies, this article ...... Fingerplan to Loop City, is a 3-D projection installation presenting the history and future of city planning for the Copenhagen area in Denmark. The installation was presented as part of the 12th Architecture Biennale in Venice in 2010....

  6. TESLA accelerator installation

    International Nuclear Information System (INIS)

    Neskovic, N.; Ostojic, R.; Susini, A.; Milinkovic, Lj.; Ciric, D.; Dobrosavljevic, A.; Brajuskovic, B.; Cirkovic, S.; Bojovic, B.; Josipovic, M.

    1992-01-01

    The TESLA accelerator Installation is described. Its main parts are the VINCY Cyclotron, the multiply charged heavy-ion mVINIS Ion Source, and the negative light-ion pVINIS Ion Source. The Installation should be the principal installation of a regional center for basic and applied research in nuclear physics, atomic physics, surface physics and solid state physics, for production of radioisotopes, for research and therapy in nuclear medicine. The first extraction of the ion beam from the Cyclotron is planned for 1995. (R.P.) 3 refs.; 1 fig

  7. Health physics problems in the context of the development of industrial uses of nuclear energy; Les problemes de radioprotection devant le developpement de l'utilisation industrielle de l'energie nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Duhamel, F.; Menoux, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    fate of radioactive ions in the hydrosphere may be determined. - experiments and studies linked with the possibilities for disposal a underground storage of wastes. All these studies cover a complementary field, that of radioprotection, which forms the necessary link between nuclear safety proper, which concerns the actual operation of nuclear installations and medical supervision which directly concerns the health of the individual and the population. At the same time each one of the Health Physics disciplines possesses an independence which increases their efficiency on the safety level. (authors) [French] Le developpement de l'utilisation industrielle de l'energie nucleaire a mis l'accent sur la necessite de promouvoir une doctrine rationnelle et coherente en matiere de securite des installations atomiques et plus particulierement en matiere de securite des sites nucleaires. Le but principal de la securite est de diminuer, voire d'annuler les risques d'irradiation ou de contamination des travailleurs et de la population, consecutifs au fonctionnement normal ou accidentel des installations. La securite est obtenue par la mise en oeuvre d'un ensemble complexe de moyens. Parmi ces moyens les auteurs considerent essentiellement ceux qui presentent une certaine independance a l'egard du type d'installation: moyens d'alerte et de mesure et leur mise en oeuvre - preparation psychologique et technique des individus - evaluation de la capacite d'un site a absorber les rejets radioactifs sans dommage pour la population. Il est clair en effet que les consequences d'un accident sont diminuees par l'augmentation de la valeur des moyens de surveillance, de mesure et d'alerte, l'elevation du niveau technique et l'entrainement du personnel, l'education de la population. Ceci est particulierement vrai aupres d'une installation nucleaire ou l'etude des dangers presente un caractere abstrait et

  8. Health physics problems in the context of the development of industrial uses of nuclear energy; Les problemes de radioprotection devant le developpement de l'utilisation industrielle de l'energie nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Duhamel, F; Menoux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    fate of radioactive ions in the hydrosphere may be determined. - experiments and studies linked with the possibilities for disposal a underground storage of wastes. All these studies cover a complementary field, that of radioprotection, which forms the necessary link between nuclear safety proper, which concerns the actual operation of nuclear installations and medical supervision which directly concerns the health of the individual and the population. At the same time each one of the Health Physics disciplines possesses an independence which increases their efficiency on the safety level. (authors) [French] Le developpement de l'utilisation industrielle de l'energie nucleaire a mis l'accent sur la necessite de promouvoir une doctrine rationnelle et coherente en matiere de securite des installations atomiques et plus particulierement en matiere de securite des sites nucleaires. Le but principal de la securite est de diminuer, voire d'annuler les risques d'irradiation ou de contamination des travailleurs et de la population, consecutifs au fonctionnement normal ou accidentel des installations. La securite est obtenue par la mise en oeuvre d'un ensemble complexe de moyens. Parmi ces moyens les auteurs considerent essentiellement ceux qui presentent une certaine independance a l'egard du type d'installation: moyens d'alerte et de mesure et leur mise en oeuvre - preparation psychologique et technique des individus - evaluation de la capacite d'un site a absorber les rejets radioactifs sans dommage pour la population. Il est clair en effet que les consequences d'un accident sont diminuees par l'augmentation de la valeur des moyens de surveillance, de mesure et d'alerte, l'elevation du niveau technique et l'entrainement du personnel, l'education de la population. Ceci est particulierement vrai aupres d'une installation nucleaire ou l'etude des dangers presente un caractere abstrait et ou les moyens technologiques de protection sont multiples et complexes. Les etudes de

  9. Construction, fabrication, and installation

    International Nuclear Information System (INIS)

    1992-05-01

    This standard specifies the construction, fabrication, and installation requirements that apply to concrete containment structures of a containment system designated as class containment components, parts and appurtenances for nuclear power plants

  10. Visiting the SPS installation

    CERN Multimedia

    1975-01-01

    ...., Guenther Loehr, Hans Horisberger walk along the SPS tunnel: here, on the right, an absorber block of 22 tons for beam dumping in the external beam lines. The chariot serves for the installation of the block.

  11. Biggest semiconductor installed

    CERN Multimedia

    2008-01-01

    Scientists and technicians at the European Laboratory for Particle Physics, commonly known by its French acronym CERN (Centre Europen pour la Recherche Nuclaire), have completed the installation of the largest semiconductor silicon detector.

  12. Sizewell 'B' cable installation

    International Nuclear Information System (INIS)

    Gemmell, D.R.

    1992-01-01

    N G Bailey and Co. Ltd., UK were awarded the contract for the procurement, manufacture, works testing, works finishing, supply, delivery, off-loading, storage, installation, site finishing, preservation, setting to work and site testing of the following; the main cable installation throughout the Station including the addition of the Radioactive Waste Building, earthing and lightning protection installation, cable supporting steelwork and carriers and glanding and termination of cables. The cabling installation comprises power distribution, control and instrumentation cabling including all the associated cabling accessories, terminal boxes and similar components. The way that the contract was set-up, awarded and is now being carried out is described. Planning and industrial relations have been key features of the contract. (Author)

  13. LE SENTIMENT DE LA NATURE DANS LA NOUVELLE HELOISE DE ROUSSEAU

    OpenAIRE

    YÖNTEN, Yrd.Doç.Dr.Uğur

    2002-01-01

    Yrd.Doç.Dr.Uğur YÖNTEN D.Ü.Eğitim Fakültesi Fransız Dili Eğitimi A.B.D Bu çalışmamızda Jean-Jacques Rousseau'nun Julie ou La Nouvelle Héloïse (Julie Ya da Yeni Héloïse) adlı romanında "doğa tutkusunu" incelemeye çalıştık. Romandaki doğa yansımalarını ele almadan önce yazardaki bu duygunun nasıl ve ne zam...

  14. La nouvelle bourgeoisie islamique. Le modèle turc, de Dilek Yankaya

    OpenAIRE

    Lelandais, Gülçin Erdi

    2016-01-01

    De nombreux travaux sur la Turquie contemporaine ont été réalisés ces dernières années en France. La plus grande partie d’entre eux se focalise sur le champ politique et ses évolutions, les minorités ethniques — notamment les Kurdes –, et sur des mobilisations sociales, politiques et environnementales comme la mobilisation autour du parc Gezi. Le livre de Dilek Yankaya ouvre un nouveau champ d’analyse avec sa recherche, pionnière en son genre en France, qui étudie l’émergence d’une nouvelle é...

  15. Le méga-fichier TES dans une nouvelle architecture de surveillance

    OpenAIRE

    Vitalis, André

    2017-01-01

    La récente création du méga-fichier biométrique TES de tous les Français, répond, même s’il n’est pas mis en avant, à un souci sécuritaire. Si l’on veut véritablement comprendre les raisons et la portée de cette création, il faut la replacer dans la nouvelle architecture de surveillance en cours de construction depuis plus d’une décennie.

  16. Capping off installation

    CERN Multimedia

    2006-01-01

    Installation of the cathode strip chambers for the muon system on the CMS positive endcap has been completed. Technicians install one of the last muon system cathode strip chambers on the CMS positive endcap. Like successfully putting together the pieces of a giant puzzle, installation of the muon system cathode strip chambers on one of the CMS endcaps has been completed. Total installation of the cathode strip chambers (CSC) is now 91 percent complete; only one ring of chambers needs to be mounted on the remaining endcap to finish installation of the entire system. To guarantee a good fit for the 468 total endcap muon system CSCs, physicists and engineers from the collaboration spent about 10 years carefully planning the design. The endcap muon system's cables, boxes, pipes and other parts were designed and integrated using a 3D computerized model. 'It took a long time to do all the computer modelling, but in the long run it saved us an enormous amount of time because it meant that everything fit together,...

  17. Python Introduction and Installation

    Directory of Open Access Journals (Sweden)

    William J. Turkel

    2012-07-01

    Full Text Available This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo Edit, but you can use any text editor capable of working with Python. Here’s a list of other options: Python Editors. Once everything is installed, you will write your first programs, “Hello World” in Python and HTML.

  18. Python Introduction and Installation

    OpenAIRE

    William J. Turkel; Adam Crymble

    2012-01-01

    This first lesson in our section on dealing with Online Sources is designed to get you and your computer set up to start programming. We will focus on installing the relevant software – all free and reputable – and finally we will help you to get your toes wet with some simple programming that provides immediate results. In this opening module you will install the Python programming language, the Beautiful Soup HTML/XML parser, and a text editor. Screencaps provided here come from Komodo ...

  19. Logistics of LEP installation

    International Nuclear Information System (INIS)

    Genier, C.; Capper, S.

    1988-01-01

    The size of the LEP project, coupled with the tight construction schedules, calls for organized planning, logistics, monitoring and control. This is being carried out at present using tools such as ORACLE the Relational Database Management System, running on a VAX cluster for data storage and transfer, micro-computers for on-site follow-up, and PC's running Professional ORACLE, DOS and XENIX linked to a communications network to receive data feedback concerning transport and handling means. Following over 2 years of installations, this paper presents the methods used for the logistics of installation and their results

  20. Electrical installations technology

    CERN Document Server

    Whitfield, J F

    1968-01-01

    Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the "Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemis

  1. Field installation and maintenance

    International Nuclear Information System (INIS)

    Prebble, R.E.

    1981-01-01

    The use of a neutron moisture meter for the determination of the water content of soil necessitates the installation of an access tube down which the probe can be lowered. Errors in neutron count rate will be introduced if water enters the air gap between a loose fitting tube and the soil. Errors may also be caused by changes in the soil structure resulting from the techniques for soil removal and from driving the access hole. Access tube materials and dimensions, methods of installation and maintenance of the site are discussed

  2. Living on the mall : patterning and place making in the case study of Nouvelle

    Energy Technology Data Exchange (ETDEWEB)

    Gillies-Smith, S.; Ring, H. [Martha Schwartz, Inc., Cambridge, MA (United States)

    2007-07-01

    One of the largest habitable green roofs in the New England area was designed by Martha Schwartz Inc. The green roof spans 1.5 acres of mall rooftop that will be accessible by two connected condominium towers. A condominium complex associated with the expansion of the Natick Mall entitled Nouvelle, offers a new type of housing, in which a private, residential apartment complex adjoins a suburban, upscale indoor shopping mall. There are many new opportunities to use the expansive area of the mall complex roof to function as a productive, multi-use, shared private park. As an art-based landscape architectural practice, the office has adapted bold and graphic qualities as a model for its green roof design. The Nouvelle green roof offers dynamic circulation, enjoyable social space and recreation, intersecting a continuous coverage of patterned sedum and river stone that spans an entire roofscape. The green roof demonstrates an innovative combination of intensive and extensive plantings that create a system of legible and visually pleasing patterning from above. This case study addressed these innovations and implementation challenges within the context of mall architecture and green roof technologies. In addition, it also identified the social uses of roof spaces, and the aesthetics and sustainability of patterning in intensive and extensive planting design.

  3. Nuclear Installations Act 1969

    International Nuclear Information System (INIS)

    1969-01-01

    The purpose of this Act is to amend the Nuclear Installations Act 1965 to bring it into full compliance with the international conventions on nuclear third party liability to which the United Kingdom is a Signatory, namely, the Paris Convention, the Brussels Supplementary Convention and the Vienna Convention. (NEA) [fr

  4. The latest electrical installation (I)

    International Nuclear Information System (INIS)

    Won, Jong Su

    1976-04-01

    This book deals with the latest electrical installation. The contents of this book are construction electrical installation, regulations related electrical installation, foundation and principle of wiring, main line feeder, lighting installation, power of wiring, main line feeder, lighting installation, power installation, method to read structure drawing for electrical construct drawing electric lamp wiring diagram, working drawing, material and tools and method of construction of electrical installation on types of wiring construction, metallic conduit, rigid poly-vinyl conduit wiring, bus duct work, cable work and insulation out of metal lathed.

  5. The Function of the Medieval in Jean-Jacques Rousseau's Nouvelle Heloise : A Rereading of the Abelard and Heloise Motif

    NARCIS (Netherlands)

    Montoya, Alicia C.

    2010-01-01

    Jean-Jacques Rousseau's critical rewriting in his Nouvelle H,lo

  6. Study: control of atomic energy power plant; Etude de la regulation d'une installation atomique productrice d'energie

    Energy Technology Data Exchange (ETDEWEB)

    Dautray, R; Leny, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    We are studying the control of a very flexible atomic power plant, able to supply an independent network. Two systems have been examined: in the first the moderator pre-heats the light water, in the second, this preheating is dispensed with, subsequent to a study of the dynamics of the plant. Very complete linear approximation study is being effected on the model of the second system, all effects being taken into account. The reactor is stable at all power levels, though slight reactivity or load variations cause undamped power oscillations around the equilibrium level. (author)Fren. [French] Nous etudions la regulation d'une installation atomique d'une grande souplesse, pouvant eventuellement fournir de l'energie a un reseau isole. Deux versions de l'installation sont etudiees: dans la premiere le moderateur sert a rechauffer l'eau industrielle, mais l'etude dynamique conduit a supprimer ce rechauffage, ce qui donne la deuxieme version. On effectue sur celle-ci une etude en approximation lineaire tres complete ou l'on tient compte de differents effets. L'installation se montre stable a tous les niveaux de puissance. Toutefois, de petites perturbations de reactivite ou de charge entrainent des oscillations de puissance mal amorties autour de la position d'equilibre. (auteur)

  7. Nouvelle cuisine

    CERN Document Server

    2007-01-01

    Diners at CERN's Restaurant No. 1 have been adjusting to some temporary arrangements while building work takes place in the main service area. The essential renovation will bring many improvements in the near future. The restaurant before restoration. A huge white marquee erected on a green lawn greets the eye. The sight is familiar in the summer months, but the sharp chill in the air disrupts the scene. Instead of a mid-summer's day, it's actually the middle of January. This apparently strange reversal of seasons is a way of providing an additional dining and service area outside Restaurant No. 1. As renovations get underway inside, the mysterious hum of drills and the hollow echo of hammering behind scaffold boards raise our curiosity about what is in-store. 'Everything will be better,' says Mario Zanolini, head waiter of Restaurant No. 1. 'It will be more comfortable for the customers. The free-flow area will be bigger and there will be 7 tills instead of the previous 5.' These are just for starters. ...

  8. BROOKHAVEN: RHIC installation

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This summer, the first superconducting magnet was installed in 3.8 kilometre tunnel for Brookhaven's RHIC heavy ion collider (October, page 31). Manufactured by Northrop Grumman's Electronics and System Integration Division, the magnet is the first of RHIC's 373 dipoles. In addition to the dipoles, Northrop Grumman will also provide 432 RHIC quadrupoles. The first quadrupole was delivered on 8 April, a month before the first dipole arrived for onsite testing prior to installation. RHIC will need 1,700 superconducting magnets - dipoles, quadrupoles, sextupoles and correcting magnets, 1,200 of which will be built by industry and the rest built at Brookhaven. The 300 sextupoles are being supplied by Everson Electric

  9. Entropy and Digital Installation

    Directory of Open Access Journals (Sweden)

    Susan Ballard

    2005-01-01

    Full Text Available This paper examines entropy as a process which introduces ideas of distributed materiality to digital installation. Beginning from an analysis of entropy as both force and probability measure within information theory and it’s extension in Ruldof Arnheim’s text ‘Entropy and Art” it develops an argument for the positive rather thannegative forces of entropy. The paper centres on a discussion of two recent works by New Zealand artists Ronnie van Hout (“On the Run”, Wellington City Gallery, NZ, 2004 and Alex Monteith (“Invisible Cities”, Physics Room Contemporary Art Space, Christchurch, NZ, 2004. Ballard suggests that entropy, rather than being a hindrance to understanding or a random chaotic force, discloses a necessary and material politics of noise present in digital installation.

  10. Installation Strategic Planning Guidebook

    Science.gov (United States)

    2012-05-01

    Installation natural resource concerns (for example, wetlands , number of endangered species, water use restrictions, encroachment on training lands...Koehler Publishing, 1994 7. Strategy Safari – A Guided Tour Through the Wilds of Strategic Management by Henry Mintzberg, Bruce Ahlstrand, and...T. (1987). NY: Knopf 36. Shaping Strategic Planning: Frogs, Dragons, Bees and Turkey Tails. Pfeiffer, J. W., Goodstein, L. D. & Nolan, T. M. (1989

  11. Installing the ALICE detector

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The huge iron yoke in the cavern at Point 2 in the LHC tunnel is prepared for the installation of the ALICE experiment. The yoke is being reused from the previous L3 experiment that was located at the same point during the LEP project from 1989 to 2000. ALICE will be inserted piece by piece into the cradle where it will be used to study collisions between two beams of lead ions.

  12. SNRIU nuclear installation modifications

    International Nuclear Information System (INIS)

    Goroshanskyi, Andrii

    2013-01-01

    Design stages of Nuclear Instalations (NI): NI design is performed in three stages: • Feasibility study: - Feasibility study is developed on the basis of the customer task for production facilities and linear facilities engineering and transport infrastructure that require detailed study of relevant decisions and identify options for and feasibility of construction. • Design: - The design is developed on the basis of design task, initial data and approved the previous stage under three-stage design. • Detailed documentation

  13. Safety of nuclear installations

    International Nuclear Information System (INIS)

    1991-01-01

    In accordance with the Nuclear Energy Act, a Licence may only be issued if the precautions required by the state of the art have been taken to prevent damage resulting from the construction and operation of the installation. The maximum admissible body doses in the area around the installation which must be observed in planning constructional and other technical protective measures to counter accidents in or at a nuclear power station (accident planning values, are established). According to the Radiological Protection Ordinance the Licensing Authority can consider these precautions to have been taken if, in designing the installation against accidents, the applicant has assumed the accidents which, according to the Safety Criteria and Guidelines for Nuclear Power Stations published in the Federal Register by the Federal Minister of the Interior after hearing the competent senior state authorities, must determine the design of a nuclear power station. On the basis of previous experience from safety analysis, assessment and operation of nuclear power stations, the accident guidelines published here define which accidents are determinative for the safety-related design of PWR power stations and what verification -particularly with regard to compliance with the accident planning values of the Radiological Protection Ordinance -must be provided by the applicant. (author)

  14. First ALICE detectors installed!

    CERN Multimedia

    2006-01-01

    Detectors to track down penetrating muon particles are the first to be placed in their final position in the ALICE cavern. The Alice muon spectrometer: in the foreground the trigger chamber is positioned in front of the muon wall, with the dipole magnet in the background. After the impressive transport of its dipole magnet, ALICE has begun to fill the spectrometer with detectors. In mid-July, the ALICE muon spectrometer team achieved important milestones with the installation of the trigger and the tracking chambers of the muon spectrometer. They are the first detectors to be installed in their final position in the cavern. All of the eight half planes of the RPCs (resistive plate chambers) have been installed in their final position behind the muon filter. The role of the trigger detector is to select events containing a muon pair coming, for instance, from the decay of J/ or Y resonances. The selection is made on the transverse momentum of the two individual muons. The internal parts of the RPCs, made o...

  15. Une Nouvelle Orientation Psychophysique dans la Pédagogie Théâtrale Contemporaine

    Directory of Open Access Journals (Sweden)

    Vezio Ruggieri

    2015-09-01

    Full Text Available Cet article a pour but de présenter comment les apports du modèle psychophysiologique bio-existentialiste élaboré par Vezio Ruggieri et ses collaborateurs peuvent jeter une lumière nouvelle sur les processus sous-jacents le jeu de l’acteur tels que la présence scénique, le processus d’identification avec un personnage et le complexe mécanisme de la prosodie. Cet encadrement théorique, qui voit le rapport corps-esprit dans une relation circulaire, éclairera le lecteur sur les bases physiologiques de la perception et de l’imagination ainsi que sur le rôle fondamental que la structure musculaire joue dans la construction de ces phénomènes.

  16. Securite, dangerosite, biopolitique: trois versants d'une nouvelle pratique de pouvoir sur les individus

    Directory of Open Access Journals (Sweden)

    Jean-François Bert

    2012-01-01

    Full Text Available Le questionnement de Foucault sur la judiciarisation des sociétés contemporaines renvoie à plusieurs controverses qui, entre 1974 et 1976, ont spécifiquement concerné la question du vivant comme de son rapport au champ du droit et des institutions politiques. Ces polémiques se sont cristallisées autour d'affaires judiciaires retentissantes mais également autour d'un discours technique et politique qui donne une place nouvelle aux notions de dangerosité, de sécurité et à la question plus générale de la gestion du vivant. Trois discours qui, pour Foucault, sont révélateur d'un profond changement de société et de mode de gouvernement des individus.

  17. Qui sera le nouvel Einstein ? Vers une nouvelle theorie de la gravitation

    Science.gov (United States)

    Bonnet-Bidaud, J. M.

    1999-10-01

    Un debat de plus d'un siecle a resurgi ces toutes dernieres annees avec une vigueur nouvelle. L'enjeu ? Mettre fin, ni plus ni moins, a l'une des contradictions les plus inouies de la physique fondamentale, en reconciliant mecanique quantique et relativite generale. En effet, a l'heure ou la gravitation semble enfin sur le point de fusionner avec les trois autres forces de la nature. il est certain que la relativite d'Einstein doit etre bientot remplacer par une autre theorie... Reste quye tous les physiciens sont loin de s'accorder sur la marche a suivree. Gravitation quantique, relativite d'echelle, supersymetrie, les candidates ne manquent pas.

  18. Karl Polanyi, la Nouvelle sociologie économique et les forces du marché

    Directory of Open Access Journals (Sweden)

    Ronan Le Velly

    2008-12-01

    Full Text Available Cet article montre en quoi plusieurs auteurs de la Nouvelle sociologie économique tendent à adopter un regard incomplet sur les forces du marché. Pour cela, l’auteur distingue deux notions d’encastrement renvoyant pour la première à un cadre méthodologique institutionnaliste et pour la seconde à l’observation du poids variable des forces du marché. Il établit qu’autant des sociologues classiques comme Weber ou Polanyi ont su coupler ces deux approches, autant plusieurs travaux majeurs de la Nouvelle sociologie économique, notamment ceux de Zelizer, de Fligstein et de Biggart, adoptent la première perspective mais ne traitent que de façon partielle de la seconde. L’auteur met particulièrement en cause les objets de recherche retenus par ces derniers auteurs, dès lors que sont systématiquement privilégiées des situations où les forces du marché sont tenues à l’écart.This article shows how many authors of the New Economic Sociology tend to adopt an incomplete view of market forces. The author distinguishes two notions of embeddedness, one related to the institutionalist theories and the second to the observation of the variable weight of market forces. It is established that classical sociologists such as Weber or Polanyi have joined these two approaches, while manyu works of the New sociological economy, for examle those of Zelizer, Fligstein or Biggart adopt the first perspective, but only treat the second partially. The author particularly questions the research objects chosen by these authors, since he considers that they generally refer to situations where market forces are held at bay.

  19. La nouvelle donne de la santé globale : dynamiques et écueils

    Directory of Open Access Journals (Sweden)

    Marine Buissonnière

    2012-04-01

    Full Text Available Les quinze dernières années ont été marquées par l’avènement de nouveaux acteurs dans le champ de la santé globale et l’augmentation de l’aide au développement en faveur de la santé. Ces acteurs ont capté une partie importante des ressources privées et publiques supplémentaires disponibles et se sont imposés comme les pièces maîtresses de ce nouvel échiquier, aux dépens des institutions traditionnelles qui ont graduellement perdu leur prépondérance et ont vu leur leadership s’affaiblir. Les choix et politiques de santé ont peu à peu échappé à la seule autorité des institutions qui en avaient jusqu’alors le mandat et en assumaient la charge. Certains pans entiers de la santé sont désormais dominés par des financeurs privés, devenus de facto prescripteurs d’orientations de santé publique. Cette nouvelle donne pose des questions essentielles de gouvernance et de responsabilité. Qui décide des orientations ? Comment les décisions sont-elles prises ? Les pays destinataires de l’aide doivent encore trop souvent subir le manque de coordination des donateurs et l’absence d’alignement des agendas. Dans ce contexte, et en prenant acte de cette nouvelle réalité, quelques pistes mériteraient d’être explorées afin de garantir que les orientations en matière de santé globale reflètent au mieux la réalité des besoins et les aspirations des pays.

  20. Samus Toroid Installation Fixture

    Energy Technology Data Exchange (ETDEWEB)

    Stredde, H.; /Fermilab

    1990-06-27

    The SAMUS (Small Angle Muon System) toroids have been designed and fabricated in the USSR and delivered to D0 ready for installation into the D0 detector. These toroids will be installed into the aperture of the EF's (End Toroids). The aperture in the EF's is 72-inch vertically and 66-inch horizontally. The Samus toroid is 70-inch vertically by 64-inch horizontally by 66-inch long and weighs approximately 38 tons. The Samus toroid has a 20-inch by 20-inch aperture in the center and it is through this aperture that the lift fixture must fit. The toroid must be 'threaded' through the EF aperture. Further, the Samus toroid coils are wound about the vertical portion of the aperture and thus limit the area where a lift fixture can make contact and not damage the coils. The fixture is designed to lift along a surface adjacent to the coils, but with clearance to the coil and with contact to the upper steel block of the toroid. The lift and installation will be done with the 50 ton crane at DO. The fixture was tested by lifting the Samus Toroid 2-inch off the floor and holding the weight for 10 minutes. Deflection was as predicted by the design calculations. Enclosed are sketches of the fixture and it relation to both Toroids (Samus and EF), along with hand calculations and an Finite Element Analysis. The PEA work was done by Kay Weber of the Accelerator Engineering Department.

  1. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Keller, W.

    1976-01-01

    A nuclear reactor installation includes a pressurized-water coolant reactor vessel and a concrete biological shield surrounding this vessel. The shield forms a space between it and the vessel large enough to permit rapid escape of the pressurized-water coolant therefrom in the event the vessel ruptures. Struts extend radially between the vessel and shield for a distance permitting normal radial thermal movement of the vessel, while containing the vessel in the event it ruptures, the struts being interspaced from each other to permit rapid escape of the pressurized-water coolant from the space between the shield and the vessel

  2. Decommissioning nuclear installations

    International Nuclear Information System (INIS)

    Dadoumont, J.

    2010-01-01

    When a nuclear installation is permanently shut down, it is crucial to completely dismantle and decontaminate it on account of radiological safety. The expertise that SCK-CEN has built up in the decommissioning operation of its own BR3 reactor is now available nationally and internationally. Last year SCK-CEN played an important role in the newly started dismantling and decontamination of the MOX plant (Mixed Oxide) of Belgonucleaire in Dessel, and the decommissioning of the university research reactor Thetis in Ghent.

  3. Fires of sodium installations

    International Nuclear Information System (INIS)

    Hajek, L.; Tlalka, R.

    1984-01-01

    A survey is presented of the literature dealing with fires of sodium installations between 1974 and 1981. Also described are three experimental fires of ca 50 kg of sodium in an open area, monitored by UJV Rez. The experimental conditions of the experiments are described and a phenomenological description is presented of the course of the fires. The experiments showed a relationship between wind velocity in the area surrounding the fire and surface temperature of the sodium flame. Systems analysis methods were applied to sodium area, spray and tube fires. (author)

  4. Worldwide installed geothermal power

    International Nuclear Information System (INIS)

    Laplaige, P.

    1995-01-01

    Worldwide electric energy production data are easy to compile, according to the informations given by individual countries. On the contrary, thermal applications of geothermics are difficult to quantify due to the variety of applications and the number of countries concerned. Exhaustive informations sometimes cannot be obtained from huge countries (China, Russia..) because of data centralization problems or not exploitable data transmission. Therefore, installed power data for geothermal heat production are given for 26 countries over the 57 that have answered the International Geothermal Association questionnaire. (J.S.). 1 fig., 2 tabs., 1 photo

  5. Wireless installation standard

    International Nuclear Information System (INIS)

    Lim, Hwang Bin

    2007-12-01

    This is divided six parts which are radio regulation law on securing of radio resource, use of radio resource, protection of radio resource, radio regulation enforcement ordinance with securing, distribution and assignment of radio regulation, radio regulation enforcement regulation on utility of radio resource and technical qualification examination, a wireless installation regulation of technique standard and safety facility standard, radio regulation such as certification regulation of information communicative machines and regulation of radio station on compliance of signal security, radio equipment in radio station, standard frequency station and emergency communication.

  6. Nuclear installations sites safety

    International Nuclear Information System (INIS)

    Barber, P.; Candes, P.; Duclos, P.; Doumenc, A.; Faure, J.; Hugon, J.; Mohammadioun, B.

    1988-11-01

    This report is divided into ten parts bearing: 1 Safety analysis procedures for Basis Nuclear Installations sites (BNI) in France 2 Site safety for BNI in France 3 Industrial and transport activities risks for BNI in France 4 Demographic characteristics near BNI sites in France 5 Meteorologic characteristics of BNI sites in France 6 Geological aspects near the BNI sites in France 7 Seismic studies for BNI sites in France 8 Hydrogeological aspects near BNI sites in France 9 Hydrological aspects near BNI sites in France 10 Ecological and radioecological studies of BNI sites in France [fr

  7. Performance of buried pipe installation.

    Science.gov (United States)

    2010-05-01

    The purpose of this study is to determine the effects of geometric and mechanical parameters : characterizing the soil structure interaction developed in a buried pipe installation located under : roads/highways. The drainage pipes or culverts instal...

  8. CNGS Reflector installed

    CERN Multimedia

    2006-01-01

    A major component that will help target the CNGS neutrino beam for its 732km journey through the earth's crust, from CERN to the Gran Sasso laboratory in Italy, has been installed in its final position. The transport of the huge magnetic horn reflector through the CNGS access gallery. A team from CNGS and TS/IC, and the contractors DBS, transported the magnetic horn reflector on 5th December, in a carefully conducted operation that took just under two hours. The reflector is 7m long, 1.6m in diameter and 1.6 tonnes in weight. With only a matter of centimetres to spare on either side, the reflector was transported through the CNGS access gallery, before being installed in the experiment's target chamber. The larger of two magnetic horns, the reflector will help refocus sprays of high energy pions and kaons emitted after a 0.5MW stream of protons from the Super Proton Synchrotron (SPS) strikes nucleons in a graphite target. The horns are toroidal magnetic lenses and work with high pulsed currents: 150 kA f...

  9. Heating equipment installation system

    International Nuclear Information System (INIS)

    Meuschke, R.E.; Pomaibo, P.P.

    1991-01-01

    Disclosed is a method for installing a heater unit assembly in a reactor pressure vessel for performance of an annealing treatment on the vessel, the vessel having a vertical axis, being open at the top, being provided at the top with a flange having a horizontal surface, and being provided internally, at a location below the flange, with orientation elements which are asymmetrical with respect to the vertical axis, by the steps of: providing an orientation fixture having an upwardly extending guide member and orientation elements and installing the orientation fixture in the vessel so that the orientation elements of the orientation fixture mate with the orientation elements of the pressure vessel in order to establish a defined position of the orientation fixture in the pressure vessel, and so that the guide member projects above the pressure vessel flange; placing a seal ring in a defined position on the pressure vessel flange with the aid of the guide member; mounting at least one vertical, upwardly extending guide stud upon the seal ring; withdrawing the orientation fixture from the pressure vessel; and moving the heater unit assembly vertically downwardly into the pressure vessel while guiding the heater unit assembly along a path with the aid of the guide stud. 5 figures

  10. Discours rationnel vs discours passionnel. Analyse sémiotique d’un fragment de la Nouvelle Héloïse

    Directory of Open Access Journals (Sweden)

    Alexandrina Mustăţea

    2007-05-01

    Full Text Available Roman sentimental, La Nouvelle Héloïse double son parcours narratif d’un parcours émotionnel et sensoriel qui dessine ce que l’on pourrait nommer la configuration passionnelle de l’ensemble textuel. Roman épistolaire, La Nouvelle Héloïse situe le foyer de la passion dans le corps même du scripteur de la lettre, à la fois être du monde sensible et instance discursive.

  11. Decommissioning of offshore installations

    Energy Technology Data Exchange (ETDEWEB)

    Oeen, Sigrun; Iversen, Per Erik; Stokke, Reidunn; Nielsen, Frantz; Henriksen, Thor; Natvig, Henning; Dretvik, Oeystein; Martinsen, Finn; Bakke, Gunnstein

    2010-07-01

    New legislation on the handling and storage of radioactive substances came into force 1 January 2011. This version of the report is updated to reflect this new regulation and will therefore in some chapters differ from the Norwegian version (see NEI-NO--1660). The Ministry of the Environment commissioned the Climate and Pollution Agency to examine the environmental impacts associated with the decommissioning of offshore installations (demolition and recycling). This has involved an assessment of the volumes and types of waste material and of decommissioning capacity in Norway now and in the future. This report also presents proposals for measures and instruments to address environmental and other concerns that arise in connection with the decommissioning of offshore installations. At present, Norway has four decommissioning facilities for offshore installations, three of which are currently involved in decommissioning projects. Waste treatment plants of this kind are required to hold permits under the Pollution Control Act. The permit system allows the pollution control authority to tailor the requirements in a specific permit by evaluating conditions and limits for releases of pollutants on a case-to-case basis, and the Act also provides for requirements to be tightened up in line with the development of best available techniques (BAT). The environmental risks posed by decommissioning facilities are much the same as those from process industries and other waste treatment plants that are regulated by means of individual permits. Strict requirements are intended to ensure that environmental and health concerns are taken into account. The review of the four Norwegian decommissioning facilities in connection with this report shows that the degree to which requirements need to be tightened up varies from one facility to another. The permit for the Vats yard is newest and contains the strictest conditions. The Climate and Pollution Agency recommends a number of measures

  12. Politiques agricoles et structures agro-industrielles: une approche à partir des tableaux input-output chiliens

    Directory of Open Access Journals (Sweden)

    1992-01-01

    Full Text Available La volonté de certaines grandes puissances agro-exportatrices mondiales de libéraliser les échanges internationaux agro-alimentaires pour accélérer la croissance économique et optimiser l’utilisation des facteurs productifs, s’oppose aux politiques protectionnistes et régulationnistes en vigueur dans bon nombre de pays où l’agriculture doit remplir d’autres fonctions que la seule production de biens consommables ou exportables : autosuffisance ou sécurité alimentaire, équilibre de l’emploi, gestion de l’espace, développement industriel. Développement intégré ou recentrage des modes de produire autour d’un nombre réduit de filières de production, tel est, à notre sens, le véritable enjeu du nouvel ordre international en matière agricole. L’objectif de cette communication est de proposer - à partir de l’analyse des tableaux input-output nationaux et à titre prospectif - une méthode permettant de mettre en regard les échanges extérieurs et la structure interne des systèmes agro-alimentaires. On fait l’hypothèse que l’application indiscriminée de politiques libérales - agro-export led notamment - conduit à l’uniformisation des techniques, la spécialisation des agricultures et des filières de production et débouche à terme sur l’extraversion de l’économie. Un protectionnisme bien orienté conduit, au contraire, à la diversification des productions et des échanges inter-industriels et contribue à l’essor de complexes agro-industriels favorables à la diffusion du progrès technique et l’internationalisation des fruits de la croissance agricole. L’analyse du cas chilien, sur longue période, est particulièrement caractéristique à cet égard. Les nouvelles politiques néolibérales d’industrialisation basées sur l’agro-exportation mises en œuvre après 1973, ayant abouti à une brusque déstructuration du système agro-alimentaire de ce pays. POLÍTICAS AGRÍCOLAS Y ESTRUCTURAS

  13. Nuclear reactor installation

    International Nuclear Information System (INIS)

    Jungmann, A.

    1976-01-01

    A nuclear reactor metal pressure vessel is surrounded by a concrete wall forming an annular space around the vessel. Thermal insulation is in this space and surrounds the vessel, and a coolant-conductive layer is also in this space surrounding the thermal insulation, coolant forced through this layer reducing the thermal stress on the concrete wall. The coolant-conductive layer is formed by concrete blocks laid together and having coolant passages, these blocks being small enough individually to permit them to be cast from concrete at the reactor installation, the thermal insulation being formed by much larger sheet-metal clad concrete segments. Mortar is injected between the interfaces of the coolant-conductive layer and concrete wall and the interfaces between the fluid-conductive layer and the insulation, a layer of slippery sheet material being interposed between the insulation and the mortar. When the pressure vessel is thermally expanded by reactor operation, the annular space between it and the concrete wall is completely filled by these components so that zero-excursion rupture safeguard is provided for the vessel. 4 claims, 1 figure

  14. ROS Installation and Commissioning

    CERN Multimedia

    Gorini, B

    The ATLAS Readout group (a sub-group of TDAQ) has now completed the installation and commissioning of all of the Readout System (ROS) units. Event data from ATLAS is initially handled by detector specific hardware and software, but following a Level 1 Accept the data passes from the detector specific Readout Drivers (RODs) to the ROS, the first stage of the central ATLAS DAQ. Within the final ATLAS TDAQ system the ROS stores the data and on request makes it available to the Level 2 Trigger (L2) processors and to the Event Builder (EB) as required. The ROS is implemented as a large number of PCs housing custom built cards (ROBINs) and running custom multi-threaded software. Each ROBIN card (shown below) contains buffer memories to store the data, plus a field programmable gate array ( FPGA ) and an embedded PowerPC processor for management of the memories and data requests, and is implemented as a 64-bit 66 MHz PCI card. Both the software and the ROBIN cards have been designed and developed by the Readout g...

  15. Politiques d’équipements sportifs et évolution post-industrielle en région stéphanoise

    Directory of Open Access Journals (Sweden)

    Stéphane Merle

    2008-12-01

    Full Text Available En parallèle de la construction socio-politique d’un modèle sportif français reposant sur un effort global en faveur des pratiques sportives (depuis la masse jusqu’à l’élite, le développement sportif des années 1960-1970 est fortement marqué par l’empreinte keynésienne et fonctionnaliste. L’Etat construit en masse des équipements de base (stade, gymnase, piscine et ce maillage rationalisé concerne la région stéphanoise comme l’ensemble du territoire national. Depuis les années 1980, les grandes logiques de production d’équipements sportifs sont secouées par deux processus : l’un politique et global, la décentralisation, l’autre socioéconomique et local, la désindustrialisation (avec effacement du soutien des grandes entreprises industrielles au développement des sports.Ce double déficit de financement provoque un net ralentissement dans la construction d’équipements sportifs, sans véritable keynésianisme des collectivités locales, d’autant plus que l’aménagement sportif peine à prendre en considération les évolutions sociologiques de la pratique sportive (pratique libre de pleine nature ou en ville : jogging, VTT, roller …. Pour autant, dans cette transition post-industrielle et post-keynésienne, les équipements sportifs ne sont pas négligés : ils sont d’un type nouveau, plus spécialisés et relevant d’un côté bien souvent de logiques politiques d’instrumentalisation, d’un autre côté de logiques marchandes (pour le sport de haut niveau. Dans ce dernier cas, l’action publique en faveur des sports est questionnée, voire remise en cause, par de puissants acteurs privés, ce que montre bien l’évolution des aménagements dans et autour du stade Geoffroy Guichard.In parallel of socio-politic construction of french sports model wich rest on an effort in favour of sports (from mass to elite, the sports development in sixites and seventies is greatly marked by the keynesian

  16. New fast reactor installation concept

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The large size and complexity of fast reactor installations are emphasised and these difficulties will be increased with the advent of fast reactors of higher power. In this connection a new concept of fast reactor installation is described with a view to reducing the size of the installation and enabling most components, including even the primary vessel, to be constructed within the confines of a workshop. Full constructional details are given. (U.K.)

  17. Installing Python Modules with pip

    OpenAIRE

    Fred Gibbs

    2013-01-01

    This lesson shows you how to download and install Python modules. There are many ways to install external modules, but for the purposes of this lesson, we’re going to use a program called pip. As of Python 2.7.9 and newer, pip is installed by default. This tutorial will be helpful for anyone using older versions of Python (which are still quite common).

  18. Energy and greenhouse gas profile of the Nouvelle Aquitaine region. Release 2017

    International Nuclear Information System (INIS)

    Rousset, Alain; Poitevin, Lionel; Loeb, Amandine; Philippot, Herve; Rebouillat, Lea; Jacquelin, Antoine

    2017-06-01

    This publication first proposes graphs and comments characterising final energy consumption of the Nouvelle Aquitaine region: regional situation in 2015 (analysis per sector and per energy), primary resources, social-economic analysis (energy bill, level of energy poverty, burden due to old housing and commuting for households), evolution of energy consumption between 2005 and 2015 (per sector, per source of energy, evolution of energy intensity and of the energy bill). The next part addresses greenhouse gas emissions: regional situation in 2015 (distribution in terms of emission type and per gas), evolutions between 1990 and 2015, evolutions per sector. The third part addresses renewable energies: regional situation for the different types of renewable energy, comparison with final energy consumption, comparison with national data, production evolutions, focus per sector (wood and wood by-products, heat pumps in the housing sector, urban waste valorisation units, biogas valorisation, bio-fuels, wind energy, hydroelectricity, solar photovoltaic). The last part recalls national objectives related to energy, to greenhouse gas emissions for France and for the region, in relationship with the law on energy transition and for a green growth

  19. Nouvelle application de control des cavités 200 MHz RF du PS (CERN)

    CERN Document Server

    Cotte, D

    2011-01-01

    Le système Radio Fréquence (RF) 200MHz du PS est un outil essentiel pour la préparation des faisceaux haute intensité du PS. Dans l’anneau PS on trouve 6 cavités 200 MHz utilisées pour contrôler : • l’émittance longitudinale des « bunches » • le processus de « Rebunching » du faisceau avant de l’envoyer au SPS. Chaque cavité est pilotée par des événements appelés « timing » et suit une fonction de tension programmée. Cependant, l’électronique utilisée pour piloter les cavités 200 MHz du PS est obsolète et sa fiabilité non garantie pour cause du manque de pièces de rechange. Ce document décrit le fonctionnement du nouveau programme d’application qui fait abstraction de l’ancienne matrice hardware. Elle suit les recommandations décrites dans l’étude d’une nouvelle structure pour le système RF 200MHz du PS. [1

  20. The insurance of nuclear installations

    International Nuclear Information System (INIS)

    Francis, H.W.

    1977-01-01

    A brief account is given of the development of nuclear insurance. The subject is dealt with under the following headings: the need for nuclear insurance, nuclear insurance pools, international co-operation, nuclear installations which may be insured, international conventions relating to the liability of operators of nuclear installations, classes of nuclear insurance, nuclear reactor hazards and their assessment, future developments. (U.K.)

  1. Study and industrial applications of the external slowing-down {beta}{sup -} radiation of the yttrium - 90; Etude et applications industrielles du rayonnement de freinage externe des {beta}{sup -} de l'yttrium - 90

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P; Martinelli, P; Chauvin, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Inelastic scattering of the {beta}{sup -} particles on the nucleus gives place to the emission of a X-ray Bremsstrahlung radiation. In view of possible industrial applications, we studied the slowing-down radiation of {sup 90}(Sr + Y) sources in various materials. This pure {beta}{sup -} emitter of long period is in the fission products of uranium. Among of the industrial applications, these sources of weak X-rays energy can be used for the radiography of thin pieces, for measuring the thickness, or for the analysis by fluorescence. (M.B.) [French] La diffusion inelastique des particules {beta}{sup -} sur les noyaux donne lieu a l'emission d'un rayonnement X de freinage. En vue de possibles applications industrielles, nous avons etudie le rayonnement de freinage des sources {sup 90}(Sr + Y) dans divers materiaux. Cet emetteur {beta}{sup -} pur a longue periode se trouve dans les produits de fission de l'uranium. Parmi les applications industrielles a l'etude, ces sources de rayons X de faible energie peuvent etre utilisees pour la radiographie de pieces minces, la mesure d'epaisseurs, ou encore pour l'analyse par fluorescence. (M.B.)

  2. Successful pipeline installation for Parque das Conchas development; Subsea installation

    Energy Technology Data Exchange (ETDEWEB)

    Bartz, Cesar

    2010-07-01

    Subsea 7 has successfully delivered again in Brazilian deep-waters. The subsea engineering and construction company has recently completed pipeline installation activities for the Parque das Conchas (BC-10) development, offshore Brazil. (AG)

  3. Industrial Sterilization st the Electron Linear-Accelerator Facility at Risoe; Sterilisation industrielle a l'aide de l'accelerateur lineaire d'electrons de Riso; Promyshlennaya sterilizatsiya oblucheniem na linejnom uskoritele ehlektronov v Rizo; Esterilizacion industrial con ayuda del acelerador lineal de electrones de Riso

    Energy Technology Data Exchange (ETDEWEB)

    Brynjolfsson, A.; Holm, N. W.; Tharup, G.; Sehested, K. [Accelerator Section, Danish Atomic Energy Commission, Research Establishment Risoe (Denmark)

    1963-11-15

    avant de passer a l'application industrielle. L'accelerateur lineaire de Riso a ete utilise a cette fin, en particulier pour l'irradiation sous contrat d'instruments medicaux non recuperables pour le compte d'entreprises industrielles. L'accelerateur lineaire produit un faisceau stable d'electrons de 10 MeV a une puissance moyenne de 5 kW. Le faisceau peut s'extraire, soit en ligne droite, soit par un dispositif de deviation. Le faisceau ainsi devie est utilise pour l'irradiation. Les paquets a steriliser sont amenes dans l e champ d'irradiation a l'aide d'un convoyeur dont la vitesse peut avoir toutes les valeurs entre 0,2 et 600 mm/s. On obtient ainsi une large gamme de doses sans avoir a modifier l e reglage de l'accelerateur. L'installation fonctionne depuis l'automne 1960 pour les centres d'etudes danois et depuis 1961 pour la sterilisation industrielle d'instruments medicaux tels que seringues, sondes, appareils de transfusion et infusion, etc. Le nombre de paquets traites a augmente pour atteindre 3000 au cours du premier trimestre de 1963. Chaque paquet contient par exemple 900 seringues de 2 cm{sup 3}. Beaucoup d'efforts ont ete consacres au perfectionnement des methodes d'irradiation, notamment l'application des systemes de reflecteurs, le reglage automatique de la dose, les operations de dosimetrie courante et l'emploi d'indicateurs chromatiques. Les auteurs exposent brievement tous les details techniques importants et decrivent le procede de sterilisation (y Compris la manutention, le controle et la dosimetrie). Enfin, ils donnent quelques chiffres sur les frais d e fonctionnement. (author) [Spanish] Las elevadas intensidades de dosis que se pueden obtener con aceleradores lineales son muy utiles en las investigaciones fundamentales de quimica o fisica, pero permiten tambien llevar a cabo operaciones de caracter semiindustrial. El aparato instalado en Riso se utiliza, entre otros fines, pata la irradiacion de articulos medicos no recuperables que se efectua

  4. Solar Installation Labor Market Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  5. Installation of the Gbar LINAC

    CERN Multimedia

    Maximilien, Brice

    2017-01-01

    Installation of the GBAR linac in its shielding bunker. The electrons accelerated to 10 MeV toward a target will produce the positrons that are necessary to form anti hydrogen with the antiprotons coming from the ELENA decelerator.

  6. DAQ INSTALLATION IN USC COMPLETED

    CERN Multimedia

    A. Racz

    After one year of work at P5 in the underground control rooms (USC55-S1&S2), the DAQ installation in USC55 is completed. The first half of 2006 was dedicated to the DAQ infrastructures installation (private cable trays, rack equipment for a very dense cabling, connection to services i.e. water, power, network). The second half has been spent to install the custom made electronics (FRLs and FMMs) and place all the inter-rack cables/fibers connecting all sub-systems to central DAQ (more details are given in the internal pages). The installation has been carried out by DAQ group members, coming from the hardware and software side as well. The pictures show the very nice team spirit !

  7. Nuclear installations and their environment

    International Nuclear Information System (INIS)

    Rieu, Ch.; Berge-Thierry, C.; Duval, C.; Bonnet, Ch.; Gaubert, B.; Riffard, Th.; Greffier, G.; Cervantes, J.C.; Le Breton, F.; Clement, C.; Charbonnier, R.; Andreani, A.M.; Maubert, H.; Maisonneuve, A.

    2002-01-01

    This dossier deals with protection of nuclear installations against external risks. The articles come from the presentations of the Conference on 'Nuclear installations and their environment', held by the 'Safety and Environment Protection' Section of the French Nuclear Energy Society on October 15, 2002. Floods, earthquakes, winter cold, snow-falls, wind, fires are the main natural risks taken into account. Risks from industrial environment and communication lines are also considered. (authors)

  8. Suitcase to Audit Solar Installations

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Barcala, J.M.; Blas de, J.; Molinero, A.; Navarrete, J.J.; Yuste, C.

    2001-07-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  9. Suitcase to Audit Solar Installations

    International Nuclear Information System (INIS)

    Alberdi, J.; Barcala, J. M.; Blas, J. de; Molinero, A.; Navarrete, J. J.; Yuste, C.

    2001-01-01

    The audit suitcase was proposed by BESEL to introduce in the solar energy market a new tool which can make an evaluation of solar installation efficiency. Non-invasive sensors and low power components permit both easy installation of the devices and data storage for a period as long as ten days. This project was funded by the contract JOR3-CT98-7030 of the European Union JOULE III program. (Author)

  10. A diagnosis method for physical systems using a multi-modeling approach; Utilisation de l'approche multi-modeles pour l'aide au diagnostic d'installations industrielles

    Energy Technology Data Exchange (ETDEWEB)

    Thetiot, R

    2000-07-01

    In this thesis we propose a method for diagnosis problem solving. This method is based on a multi-modeling approach describing both normal and abnormal behavior of a system. This modeling approach allows to represent a system at different abstraction levels (behavioral, functional and teleological). Fundamental knowledge is described according to a bond-graph representation. We show that bond-graph representation can be exploited in order to generate (completely or partially) the functional models. The different models of the multi-modeling approach allows to define the functional state of a system at different abstraction levels. We exploit this property to exonerate sub-systems for which the expected behavior is observed. The behavioral and functional descriptions of the remaining sub-systems are exploited hierarchically in a two steps process. In a first step, the abnormal behaviors explaining some observations are identified. In a second step, the remaining unexplained observations are used to generate conflict sets and thus the consistency based diagnoses. The modeling method and the diagnosis process have been applied to a Reactor Coolant Pump Sets. This application illustrates the concepts described in this thesis and shows its potentialities. (authors)

  11. A diagnosis method for physical systems using a multi-modeling approach; Utilisation de l'approche multi-modeles pour l'aide au diagnostic d'installations industrielles

    Energy Technology Data Exchange (ETDEWEB)

    Thetiot, R

    2000-07-01

    In this thesis we propose a method for diagnosis problem solving. This method is based on a multi-modeling approach describing both normal and abnormal behavior of a system. This modeling approach allows to represent a system at different abstraction levels (behavioral, functional and teleological). Fundamental knowledge is described according to a bond-graph representation. We show that bond-graph representation can be exploited in order to generate (completely or partially) the functional models. The different models of the multi-modeling approach allows to define the functional state of a system at different abstraction levels. We exploit this property to exonerate sub-systems for which the expected behavior is observed. The behavioral and functional descriptions of the remaining sub-systems are exploited hierarchically in a two steps process. In a first step, the abnormal behaviors explaining some observations are identified. In a second step, the remaining unexplained observations are used to generate conflict sets and thus the consistency based diagnoses. The modeling method and the diagnosis process have been applied to a Reactor Coolant Pump Sets. This application illustrates the concepts described in this thesis and shows its potentialities. (authors)

  12. How the Nouvelle Vague Invented the DVD: Cinephilia, new waves and film culture in the age of digital dissemination

    Directory of Open Access Journals (Sweden)

    Malte Hagener

    2014-01-01

    Full Text Available Whereas the currently emerging configurations of audiovisualcy in the age of digital networks are often addressed in terms of absolute novelty and innovation, this article wishes to shift the focus slightly, articulating instead the new in terms of the old. This essay proposes the argument that it was within the Nouvelle Vague and the French film culture of the 1960s that the DVD was “invented”. Obviously, this is a contrafactual argument, but if we understand the DVD as a discursive construction articulating a specific perspective on film, then the DVD simulates and emulates some key features of 1960s cinephilia that emerged within the context of the new waves. On the other hand, the Nouvelle Vague is understood as a broad discursive movement encompassing all segments of the institution cinema rather than five auteur-directors — Truffaut, Godard, Chabrol, Rohmer and Rivette — and their respective films. By arguing for the continuing importance of film history and culture, this article wishes to underline the fact that technological as well as aesthetic transformations are central to our understanding of media culture.

  13. Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

    Science.gov (United States)

    Aboutajeddine, Ahmed

    Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a

  14. Caractérisation de formations Miocène de la région de Taza pour des valorisations et exploitations industrielles Industrial value of the Miocene calcarenites in the region of Taza

    Directory of Open Access Journals (Sweden)

    Lahrach A.

    2012-09-01

    Full Text Available La valorisation de la formation Miocène dans la région de Taza, représentée par les calcarénites, a été menée selon deux axes ; tout d’abord une étude géologique, couplée à des études de terrain nous a permis d’évaluer l’épaisseur de la formation, une carte d’épaisseur a été dressée à cet effet. L’étude géotechnique de ces matériaux révèle que ces calcarénites ont des qualités intéressantes pour des utilisations industrielles. En effet, en se basant sur les différents tests de dureté (Los Angeles et Micro Duval, la résistance à la rupture et la porosité de nos quatre échantillons, une valeur ajoutée industrielle peut leur être attribuée dans beaucoup de domaines, comme: -Graves non traités pour couches de fondations pour les chaussées ou grave bitumeux de fondation; -Ajouts dans les bétons; -Roche marbrière et pierre de façade. En fin, sur la base de ces études géologiques et géotechniques, on peut considérer que les calcarénites de la région de Taza répondent à l’ensemble des critères d’une exploitation industrielle. The valuation of the Miocene formation in the Taza region, represented by calcarenites, was conducted according two axes; first geological survey, coupled with field studies allowed us to evaluate the thickness of the formation, a thickness map was derived from this purpose. The geotechnical study of these materials reveals that these calcarenites have interesting qualities for industrial uses. Indeed, based on the different hardness tests (Los Angeles and Micro Duval, the tensile strength and porosity of our four samples, an industrial added value can be attributed to them in many areas, such as: - Untreated Graves for layers of foundations for pavements or bituminous serious foundation; - Additions in concrete; - Roche marble and stone facade. Finally, on the basis of geological and geotechnical studies, we can consider that the calcarenites of the Taza region meet

  15. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a

  16. New strains on the civil nuclear; Nouvelles tensions sur le nucleaire civil

    Energy Technology Data Exchange (ETDEWEB)

    Derouet, V. [Head of Homeland Security, Strategy and Marketing Organisation EADS, 75 - Paris (France); Rouah, E

    2009-12-15

    The increase of the nuclear in the world industry leads to a worsening of the associated risks: installations safety, fuel cycle security, safeguards, ecology impacts. Are we able to control these risks? The nuclear needs a secure environment that many developing countries do not have. (A.L.B.)

  17. The safety of nuclear installations

    International Nuclear Information System (INIS)

    1993-01-01

    This Safety Fundamental publication sets out basic objectives, concepts and principles for ensuring safety that can be used both by the IAEA in its international assistance operations and by Member States in their national nuclear programmes. These Safety Fundamentals apply primarily to those nuclear installations in which the stored energy developed in certain situations could potentially results in the release of radioactive material from its designated location with the consequent risk of radiation exposure of people. These principles are applicable to a broad range of nuclear installations, but their detailed application will depend on the particular technology and the risks posed by it. In addition to nuclear power plants, such installations may include: research reactors and facilities, fuel enrichment, manufacturing and reprocessing plants; and certain facilities for radioactive waste treatment and storage

  18. Entre Classicisme et Modernité : La Nouvelle Revue Française dans le champ littéraire de la Belle Epoque

    NARCIS (Netherlands)

    Koffeman-Bijman, M.N.

    2003-01-01

    The literary review La Nouvelle Revue Française enjoys an enormous prestige in France. In Entre Classicisme et Modernité, Maaike Koffeman explores the origins of this legend of French literary life by means of a historical, literary and sociological analysis of the first years of the review s

  19. Industrial installation surveillance acoustic device

    International Nuclear Information System (INIS)

    Marini, Jean; Audenard, Bernard.

    1981-01-01

    The purpose of this invention is the detection of possible impacts of bodies migrating inside the installation, using acoustic sensors of the waves emitted at the time of impact of the migrating bodies. This device makes it possible to take into account only those acoustic signals relating to the impacts of bodies migrating in the area under surveillance, to the exclusion of any other acoustic or electric perturbing phenomenon. The invention has a preferential use in the case of a linear shape installation in which a fluid flows at high rate, such as a section of the primary system of a pressurized water nuclear reactor [fr

  20. Automated installation methods for photovoltaic arrays

    Science.gov (United States)

    Briggs, R.; Daniels, A.; Greenaway, R.; Oster, J., Jr.; Racki, D.; Stoeltzing, R.

    1982-11-01

    Since installation expenses constitute a substantial portion of the cost of a large photovoltaic power system, methods for reduction of these costs were investigated. The installation of the photovoltaic arrays includes all areas, starting with site preparation (i.e., trenching, wiring, drainage, foundation installation, lightning protection, grounding and installation of the panel) and concluding with the termination of the bus at the power conditioner building. To identify the optimum combination of standard installation procedures and automated/mechanized techniques, the installation process was investigated including the equipment and hardware available, the photovoltaic array structure systems and interfaces, and the array field and site characteristics. Preliminary designs of hardware for both the standard installation method, the automated/mechanized method, and a mix of standard installation procedures and mechanized procedures were identified to determine which process effectively reduced installation costs. In addition, costs associated with each type of installation method and with the design, development and fabrication of new installation hardware were generated.

  1. Horn installed in CNGS tunnel

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    The horn is installed for the CERN Neutrinos to Gran Sasso (CNGS) project. Protons collide with a graphite target producing charged particles that are focussed by the magnetic field in the horn. These particles will then pass into a decay tube where they decay into neutrinos, which travel towards a detector at Gran Sasso 732 km away in Italy.

  2. Installation tests for BERSAFE 88

    International Nuclear Information System (INIS)

    Bamfield, R.D.; Haigh, R.

    1989-02-01

    A set of ten test problems for each of the four BERSAFE stress analysis programs is provided. These problems along with this report, which forms part of the BERSAFE 88 documentation, constitute a test of the customers' BERSAFE installation. On running the problems and attaining results identical to those presented here, the customer should have some confidence that his system is operating correctly. (author)

  3. Solar Water Heater Installation Package

    Science.gov (United States)

    1982-01-01

    A 48-page report describes water-heating system, installation (covering collector orientation, mounting, plumbing and wiring), operating instructions and maintenance procedures. Commercial solar-powered water heater system consists of a solar collector, solar-heated-water tank, electrically heated water tank and controls. Analysis of possible hazards from pressure, electricity, toxicity, flammability, gas, hot water and steam are also included.

  4. Installation package - home solar heater

    Science.gov (United States)

    1980-01-01

    Installation of commerical solar-heating system at two story, three bedroom house in New Hampshire is described in 65 page report. System collectors are integrated part of building replacing conventional roofing or siding. Report also includes general description of system, its operation and guidelines, orientation and references.

  5. YB0 SERVICES INSTALLATION COMPLETED

    CERN Document Server

    The beauty of the completed YB0 was briefly visible at P5 as preparations continue for Tracker installation. A tremendous effort, lasting 7 months and involving more than 100 workers on the busiest days, resulted in 5700 electrical cables, 780 optical cables with 65k fibre channels, and 550 pipes laid on YB0 for HB, EB and Tracker.

  6. Den medicinal-industrielle logik

    DEFF Research Database (Denmark)

    Børsen, Tom

    2008-01-01

    Et kig på medicinalindustrien og den logik der styrer udviklingen af nye lægemidler. Antagelsen er, at der også eksisterer et medicinalindustrielt kompleks, bestående af ledende industrifolk, læger, forskere og regeringsembedsmænd, der alle har kommercielle interesser i den herskende lægemiddeltæ...

  7. IFP Energies nouvelles - 2013 Activity Report. 2013 financial report. Innovating for energy

    International Nuclear Information System (INIS)

    2014-01-01

    IFP Energies nouvelles (IFPEN) is a public research and training player. It has an international scope, covering the fields of energy, transport and the environment. From research to industry, technological innovation is central to all its activities. As part of the public-interest mission with which it has been tasked by the public authorities, IFPEN focuses on: - providing solutions to take up the challenges facing society in terms of energy and the climate, promoting the emergence of a sustainable energy mix; - creating wealth and jobs by supporting French and European economic activity, and the competitiveness of related industrial sectors. IFPEN has proven expertise across the entire value chain, from fundamental research to industrial research and innovation. It is funded both by a state budget and by resources provided by French and foreign international partners. The aim of IFPEN's R and D programs is to overcome existing scientific and technological barriers in order to develop innovations that can be used by industry. Through its research and resulting innovations, IFPEN fosters the economic development of fields related to the energy, transport and eco-industry sectors. In so doing, it also contributes to creating wealth and jobs. IFPEN's innovations are developed industrially through close partnerships with industrial players and IFP Group subsidiaries. In both emerging and mature markets, IFPEN creates companies or acquires stakeholdings in companies of significant potential, either directly or via capital funds. In addition, IFPEN supports the development of SMEs and SMIs as part of collaboration agreements, contributing its technical and legal expertise. Representing over 50 professions, from geological engineers to power-train engineers, IFPEN's employees form a unique body of globally recognized scientific specialists and an unparalleled network of expertise. In order to carry out their research work at the cutting edge of innovation, they have

  8. 30 CFR 57.4504 - Fan installations.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fan installations. 57.4504 Section 57.4504... Control Installation/construction/maintenance § 57.4504 Fan installations. (a) Fan houses, fan bulkheads... of combustible materials, except installed wiring, ground and track support, headframes, and direct...

  9. 'Grenelle de l'environnement ' : peut-on se passer d'une nouvelle fiscalité écologique ?

    OpenAIRE

    Eloi Laurent; Jacques Le Cacheux

    2007-01-01

    Contrairement à ce qu'a affirmé Al Gore quand il a appris la nouvelle de son Prix Nobel de la paix, la lutte contre le changement climatique n'est pas avant tout une affaire morale, mais bien un enjeu politique, et plus précisément d'économie politique. C'est le problème des moyens, des instruments et des incitations que doit désormais poser et résoudre l'action publique, les travaux des lauréats du " Prix Nobel d'économie " pouvant d'ailleurs se révéler fort utiles dans cette optique pratiqu...

  10. Le télé-achat : finalité ou usage par défaut des nouvelles convergences ?

    OpenAIRE

    Lenoir , Christophe

    2000-01-01

    HAL : hal-00558853; International audience; Le télé-achat relève-t-il d'une finalité ou d'un usage par défaut des nouvelles convergences ? A partir des questions de détermination technologique et d'indétermination des usages, cet article propose, au vu de l'évolution économique du secteur et de l'information économique véhiculée par ses agents, de s'interroger sur les conditions énonciatives de ces processus de communication et leurs conséquences sur le médium télévisuel.

  11. Literaire strategieën: de drie satellieten van La Nouvelle Revue Française (1910-1914

    Directory of Open Access Journals (Sweden)

    Maaike Koffeman

    2000-12-01

    Full Text Available La Nouvelle Revue Française, opgericht in 1908 door een groep schrijvers rond André Gide, is het belangrijkste Franse literaire maandblad van het interbellum geweest. In de jaren voorafgaand aan de Eerste Wereldoorlog is de reputatie van het tijdschrift nog relatief bescheiden, maar er is al wel een duidelijke progressie te constateren. Deze is niet alleen toe te schrijven aan de inhoudelijke kwaliteit van de bijdragen, maar vooral ook aan de manier waaorp de redactie het tijdschrift promoot. De oprichters bedienen zich van een 'mutimedia-strategie': zij ontwikkelen rond de NRF verschillende nevenactiviteiten om de naamsbekendheid van het tijdschrift te vergroten en zijn literatuuropvattingen onder een breder publiek te verspreiden. 

  12. Nouvelle procédure pour l'augmentation du temps d'usinage simulé en coupe orthogonale

    OpenAIRE

    Guediche , Mayssa; Mabrouki , Tarek; Donnet , Christophe; Bergheau , Jean-Michel; Hamdi , Hedi

    2015-01-01

    International audience; Cette étude présente une nouvelle méthodologie visant à augmenter le temps d'usinage simulé en coupe orthogonale .Le but est d'étudier ultérieurement l'évolution de l'usure des outils de coupe dans le cas de l'usinage de l'acier 42CD4. Un modèle lagrangien est donc développé sous le code de calcul ABAQUS simulant la formation du copeau. Une approche baptisée de « modélisation verticale » est développée dans le but d'augmenter le temps de coupe simulé tout en gardant un...

  13. Les théosophes et l’organisation internationale de l’éducation nouvelle (1911-1921

    Directory of Open Access Journals (Sweden)

    Sylvain Wagnon

    2017-01-01

    Full Text Available The historic importance of Theosophy within the realm of education is due to their presence in their reflexions and educational endeavours are at the origins of that nebulous movement called the New Education (éducation nouvelle. Their presence at the beginning of the organization of the New Education has been explored by several pioneering papers, but remains the blind spot in this area. In fact Theosophy’s influence has been felt but rarely analysed as the matrix of the nebulous international organization of new education. If the Theosophists’ influence were to be recognised, we think that their role, their persistent work that brought on not only the rise of new education, more specifically, the constitution of the International League of New Education but was also the making of educators of Theosophy teachings such as María Montessori and Rudolf Steiner who were not only the roots of the new education but also its main components.

  14. Physical protection of nuclear installations

    International Nuclear Information System (INIS)

    Toepfer, K.

    1989-01-01

    This contribution investigates the possible danger and the legal basis of physical protection and explains the current, integrated system provided for, as well as the underlying possible scenarios of an assault: (1) by a violent crowd of aggressors outside the installation, (2) by a small group of aggressors outside the installation, (3) by a person allowed to enter (internal assault). The physical protection system supplements the internal safety measures to enhance protection against hypothetical and possible acts of terrorism or other criminal assault. The system covers external and internal controlled areas, access monitoring, physical protection control room and service, security checks of the personnel, and activities to disclose sabotage. Some reflections on the problem field between security controls and the constitutional state conclude this contribution. (orig./HSCH) [de

  15. The dismantling of nuclear installations

    International Nuclear Information System (INIS)

    Lacoste, A.C.; Duthe, M.; Mignon, H.; Lambert, F.; Pradel, Ph.; Hillewaere, J.P.; Dupre la Tour, St.; Mandil, C.; Weil, L.; Eickelpasch, N.; Finsterwalder, L.

    1997-01-01

    for nuclear installations, the dismantling is an important part of their exploitation. The technology of dismantling is existing and to get a benefit from the radioactive decay, it seems more easy for operating company such E.D.F. to wait for fifty years before dismantling. But in order to get the knowledge of this operation, the Safety Authority wanted to devote this issue of 'Controle'to the dismantling method. This issue includes: the legal aspects, the risks assessment, the dismantling policy at E.D.F., the site of Brennilis (first French experience of dismantling), the dismantling techniques, the first dismantling of a fuel reprocessing plant, comparison with classical installations, economic aspect, some German experiences, the cleansing of the american site of Handford. (N.C.)

  16. ATLAS Software Installation on Supercomputers

    CERN Document Server

    Undrus, Alexander; The ATLAS collaboration

    2018-01-01

    PowerPC and high performance computers (HPC) are important resources for computing in the ATLAS experiment. The future LHC data processing will require more resources than Grid computing, currently using approximately 100,000 cores at well over 100 sites, can provide. Supercomputers are extremely powerful as they use resources of hundreds of thousands CPUs joined together. However their architectures have different instruction sets. ATLAS binary software distributions for x86 chipsets do not fit these architectures, as emulation of these chipsets results in huge performance loss. This presentation describes the methodology of ATLAS software installation from source code on supercomputers. The installation procedure includes downloading the ATLAS code base as well as the source of about 50 external packages, such as ROOT and Geant4, followed by compilation, and rigorous unit and integration testing. The presentation reports the application of this procedure at Titan HPC and Summit PowerPC at Oak Ridge Computin...

  17. Environmental assessment [of nuclear installations

    International Nuclear Information System (INIS)

    Townsley, M.

    1989-01-01

    The European Community has introduced a directive which instructs that for all projects likely to have a significant effect on the environment consent should only be given after a rigorous assessment of such effects has been carried out and presented as an environmental statement. Projects requiring environmental assessment include nuclear power stations, any thermal power station over 300MW, any radioactive waste storage or disposal facility, any installation which produces electricity, power lines, installations for fuel production, fuel reprocessing, radioactive waste processing and fuel enrichment. The statement must include a description of the likely effects, direct and indirect, on the environment of the development, with reference to human beings, flora, fauna, soil, water, air, climate, landscape, interactions of two or more of these, material assets and cultural heritage. Measures to avoid or remedy the impact must be included. (U.K.)

  18. Quality assurance in nuclear installations

    International Nuclear Information System (INIS)

    Torres M, Nelson.

    1985-08-01

    It has been proven that the bad quality of products, equipment, installations, and services is not due to the lack of tests, experiments and verifications. The main causes are associated with insufficient organization of the activities that have influence on the quality. The garantee of quality is conceptualized as an appropriate instrument composed of normalized criteria initially in advanced technologies. Such as nuclear science and aerospace technology. However, with the appropriate modifications it can be applied to conventional technologies

  19. Method of installing well conductors

    International Nuclear Information System (INIS)

    Houser, D.M.

    1991-01-01

    This patent describes a method of installing a well conductor in a marine environment. It comprises sealing a well conductor with a watertight plug; submerging the conductor from an elevated platform; adding additional conductor lengths to the conductor as needed thereby forming a conductor string; adjusting the buoyancy of the string to control the lowering of the string to the sea floor; and drilling through the plug after the conductor string has achieved the desired penetration depth

  20. Seismic evaluation of nuclear installations

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel

    1997-01-01

    Some considerations regarding extreme external events, natural or man-induce, such as earthquakes, floods, air crashes, etc, shall be done for nuclear facilities to minimizing the potential impact of the installation on the public and the environment. In this paper the main aspects of the seismic evaluation of nuclear facilities (except the nuclear power reactors) will be presented based on different codes and standards. (author). 7 refs., 2 tabs

  1. Mounting clips for panel installation

    Science.gov (United States)

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

    2017-07-11

    A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

  2. Installed capacity in New York

    International Nuclear Information System (INIS)

    Charlton, J.

    2006-01-01

    This presentation discussed capacity issues related to the New York Independent System Operator (NYISO). The NYISO's market volume was approximately $11 billion in 2005, and it was responsible for providing 32,075 MW of electricity at peak load to its users. Regulatory uncertainty is currently discouraging investment in new generating resources. All load serving entities are required to contract for sufficient capacity in order to meet their capacity obligations. Market participants currently determine capacity and energy revenues. The NYISO market allows suppliers to recover variable costs for providing ancillary services, and the economic value of the revenue source governs decisions made in the wholesale electricity market. The installed capacity market was designed as a spot auction deficiency auction. Phased-in demand curves are used to modify the installed capacity market's design. A sloped demand curve mechanism is used to value capacity above the minimum requirement for both reliability and competition. Participation in the day-ahead market enhances competition and exerts downward pressure on energy and ancillary service market prices. It was concluded that the market structures and design features of the installed capacity markets recognize the need for system reliability in addition to encouraging robust competition and recognizing energy price caps and regulatory oversights. tabs., figs

  3. Leukaemia near british nuclear installations

    International Nuclear Information System (INIS)

    Hubert, D.

    1991-01-01

    An excess of childhood leukaemia has been seen near some British nuclear installations, especially near the Sellafield reprocessing plant. The same result was found in a more general study including a large number of nuclear sites. Similar studies made in USA, Canada and France have been negative. Moreover, epidemiological studies made in England have discovered other childhood leukaemia clusters in areas far from nuclear facilities, and especially near potential sites of nuclear installations. Several explanations are suggested but no definite conclusion is yet possible. Doses from radioactive releases seem to be too low to account for the additional deaths from leukaemia by environmental contamination. A virus activation, which might be associated with population influx into rural isolated areas, has been considered. The hypothesis of genetic mutation induced by ionising radiation in the fathers of children with leukaemia has been made because a higher risk of leukaemia was observed for children of fathers employed at Sellafield. No firm conclusion is possible considering the small number of observed cases and the lack of excess leukaemias in the offspring of Hiroshima and Nagasaki survivors. The possibility of internal contamination, chemicals or even radon is discussed as other causes. Studies in progress might allow to find an answer to the problem of leukaemia in the vicinity of British nuclear installations [fr

  4. Hydrogénations catalytiques. De la recherche de base à l'application industrielle Catalytic Hydrogenation from Basic Research to Industrial Applications

    Directory of Open Access Journals (Sweden)

    Boitiaux J. P.

    2006-11-01

    additifs ou impuretés des charges et de donner des idées claires sur la façon de modifier les supports ou les sites métalliques. Les conséquences ont été tirées de ces études et des applications industrielles ont démontré clairement l'intérêt de ces travaux. Néanmoins certains problèmes sont encore à résoudre qu'il serait nécessaire de considérer d'un point de vue encore plus fondamental en prenant en considération le mécanisme de la réaction d'hydrogénation. Early research on catalytic hydrogenation showed the specificity of different metals for different types of hydrogenation (acetylenes, olefins, aromatics, aldehydes, nitriles, etc. . This observation somewhat vaguely included the concept of the importance of the metal/substrate pair. A contradiction with the insensitive character to the structure of such reactions then appeared. Recent research on palladium catalysts of various dispersions has clearly demonstrated the influence of particle size on the hydrogenation rate of C4 acetylenes and diolefins. Such a behavior has now been confirmed by further research on platinum and rhodium. The phenomenon is due to excessive adsorption of reactants on small particles. These particles are electrodeficient and very strongly adsorb electrodonor compounds such as unsaturated hydrocarbons. The explanation has been confirmed by the additive effect caused by piperidine. Its coadsorption on the catalyst destabilizes the metal/substrate bond and increases the activity. A complete kinetic analysis has refined this interpretation by demonstrating the constancy of intrinsic activity and the relation between sensitivity to metal dispersion and a complexing of the metallic site of the type encountered on homogeneous catalysts. This fundamental research has very important consequences on the development of industrial catalysts. For each process and hence for each hydrogenation, the optimum dispersion of the metal has to be determined to obtain the highest possible

  5. Nuclear installations: decommissioning and dismantling

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    This document is a compilation of seven talks given during the 1995 EUROFORUM conference about decommissioning and dismantling of Nuclear installations in the European Community. The first two papers give a detailed description of the legal, financial and regulatory framework of decommissioning and dismantling of nuclear facilities in the European Union and a review of the currently available decommissioning techniques for inventory, disassembly, decontamination, remote operations and management of wastes. Other papers describe some legal and technical aspects of reactor and plants dismantling in UK, Germany, Spain and France. (J.S.)

  6. Helium transfer line installation details.

    CERN Multimedia

    G. Perinic

    2007-01-01

    A particularity of the 32 m long four in one helium transfer line in between the cold box in USC55 and the cavern UX5 is the fact that the transfer line passes through a hole in the crane rail support beam. In order to ensure the alignment of the suspension rail in the interconnecting tunnel with the hole in the rail support as well as the connection points at both ends required precise measurements of the given geometries as well as the installation of a temporary target for the verification of the theoretical predictions.

  7. Rehyd development and installation report

    International Nuclear Information System (INIS)

    Schuch, R.L.; Woodall, H.N.

    1977-12-01

    Rehyd, a low-impedance, HYDRA-type, water transmission line for bremsstrahlung exposures, was installed on the north side of the REBA facility. Rehyd produces 300 kA beams of 1.2 MeV electrons with a pulse width of 170 ns. Nominal x-ray exposure dose capabilities of 7 cal/g and 20 to 25 kJ were realized thus far. A description is given of the specific design parameters and facility layouts including the unique features of the REBA Marx generator/Rehyd line energy-transfer system. Diode configurations, magnetic-field applications, and output measurements are also presented

  8. La banque de la Nouvelle-Calédonie. Existence éphémère, expérience oubliée (1874-1877)

    OpenAIRE

    Buttet, Catherine

    2009-01-01

    La Nouvelle-Calédonie, colonie pénale peu peuplée, était en 1870 tributaire des commerçants et du Trésor public pour l'ensemble des opérations bancaires. Née d'une société de colonisation d'initiative privée, la Banque de la Nouvelle-Calédonie fut une expérience distincte des anciennes banques coloniales et dont le nouveau cadre statutaire servit ensuite à la Banque d'Indochine. La banque reçut l'aval du gouvernement sous la forme d'une autorisation puis d'un privilège. Rapidement, la banque ...

  9. Proper Installation of Replacement Windows | Efficient Windows

    Science.gov (United States)

    Collaborative Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring

  10. Performance evaluation of buried pipe installation.

    Science.gov (United States)

    2010-05-01

    The purpose of this study is to determine the effects of geometric and mechanical parameters characterizing the soil structure interaction developed in a buried pipe installation located under roads/highways. The drainage pipes or culverts installed ...

  11. 14 CFR 171.159 - Installation requirements.

    Science.gov (United States)

    2010-01-01

    ... Installation requirements. (a) The facility must be installed according to accepted good engineering practices... must have a reliable source of suitable primary power, either from a power distribution system or...

  12. Nitrous Oxide Formation and Destruction by Industrial No Abatement Techniques Including Scr Emissions des protoxides d'azote par des techniques industrielles d'abattement de NO y compris le SCR

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    'investigations systématiques concernant les émissions de N2O d'unités de combustion stationnaire d'échelle industrielle, équipées de technologies d'abatement de NO. Les études effectuées en laboratoire, présentées ici, suggèrent que des techniques d'étagement du combustible, de réduction sélective non catalytique (NCSR et catalytique (CSR du NO, doivent être considérées comme des sources potentielles d'augmentation des émissions de protoxyde d'azote. L'étude utilise un réacteur (fig. 1 permettant l'étagement de flammes laminaires C2H4/O2/Ar en deux fractions Fl et F2, respectivement caractérisées par un débit D1 et D2 et une richesse R1 et R2; Rg désigne la richesse globale des deux fractions. La fraction Fl brûle sous forme de flamme de prémélange plate sur un brûleur (B1 constitué d'une plaque en bronze fritté; la fraction F2, injecté dans une double couronne à points d'injection multiples (B2 brûle sous forme de flamme de diffusion, après mélange avec les produits de combustion de la fraction Fl. La distance (X entre les deux brûleurs B1 et B2 est variable. 1. Formation de N2O due à l'étagement du combustible Le monoxyde d'azote est introduit en prémélange avec la fraction Fl. Sa concentration après mélange avec les produits de combustion de Fl est désignée par NOin. La figure 2 donne la fraction de l'azote du NO transformée en N2O (Fn en fonction de R1 avec Rg comme paramètre. Les températures mesurées au point d'injection (Tx y correspondant sont présentées sur la figure 3. On observe (1 qu'une séquence de stratification riche - pauvre est généralement plus favorable à la formation de N2O qu'une séquence pauvre - riche (fig. 1, (2 que Fn diminue lorsque Tx augmente (fig. 4 et 5 ou lorsque la concentration de l'oxygène décroît (fig. 6. Ces tendances, généralement observées dans le cas de la combustion en phase gazeuse, s'expliquent qualitativement par les réactions principales de formation et de destruction du N2O

  13. L’hybridation interspécifique chez les champignons phytopathogènes à l’origine de nouvelles maladies

    OpenAIRE

    Frey, Pascal

    2009-01-01

    Mécanisme évolutif bien connu chez les plantes, l’hybridation interspécifique a été relativement peu étudiée dans certains groupes taxonomiques, comme les champignons. Chez les champignons phytopathogènes, l’hybridation entre une espèce indigène et une espèce exotique peut pourtant conduire à l’émergence de nouvelles maladies des plantes.

  14. Crenicichla tigrina, Une nouvelle espèce de cichlidae (Pisces, Perciformes) du Rio Trombetas, Pará, Brésil

    NARCIS (Netherlands)

    Ploeg, Alex; Jégu, Michael; Ferreira, Efrem

    1991-01-01

    Une nouvelle espèce de Cichlidae, Crenicichla tigrina, est décrite et illustrée. La coloration sur le vivant et quelques remarques relatives à l’Pecologie de cette espèce sont présentée. Les relations de C. tigrina avec les autres espèces de Crenicichla à petites écailles et le mode de distribution

  15. Fuel followed control rod installation at AFRRI

    International Nuclear Information System (INIS)

    Moore, Mark; Owens, Chris; Forsbacka, Matt

    1992-01-01

    Fuel Followed Control Rods (FFCRs) were installed at the Armed Forces Radiobiology Research Institute's 1 MW TRIGA Reactor. The procedures for obtaining, shipping, and installing the FFCRs is described. As part of the FFCR installation, the transient rod drive was relocated. Core performance due to the addition of the fuel followed control rods is discussed. (author)

  16. Flat-plate solar collector - installation package

    Science.gov (United States)

    1978-01-01

    Package includes installation, operation and maintenance manual for collector, analysis of safety hazards, special handling instructions, materials list, installation drawings, and warranty and certification statement. Manual includes instructions for roof preparation and for preparing collector for installation. Several pages are devoted to major and minor repairs.

  17. The English Democrats Party ou l’émergence d’une nouvelle mouvance : le nationalisme autonomiste anglais

    Directory of Open Access Journals (Sweden)

    Claude BARBANTI

    2011-03-01

    Full Text Available La réforme dite de dévolution (décentralisation, votée en 1997, a entraîné de multiples conséquences et transformations dans la vie politique britannique. Le système traditionnellement unitaire de Westminster s’en est trouvé profondément bouleversé. Pourtant, tandis que de nombreuses études furent menées sur les divers nouveaux aspects d’une Grande-Bretagne dévolue, peu se sont penchées sur les conséquences de cette nouvelle asymétrie constitutionnelle sur l’Angleterre. Lorsque des députés de circonscriptions « celtiques » (en Écosse ou au pays de Galles arrivent à influencer le résultat de votes sur des affaires exclusivement anglaises, certains députés d’Angleterre, à Westminster, ne peuvent que se sentir désarmés face au manque de dispositions constitutionnelles garantissant un statut particulier pour ce territoire. Dès lors, de cette « question anglaise » (« English Question », naîtra toute une nouvelle mouvance autonomiste entièrement dédiée à l’obtention d’un Parlement anglais.Devolution at the end of the 1990s has led to numerous consequences and transformations in British politics. The traditional and centralised Westminster system has been turned upside down, and many studies have been carried out on the various aspects of this new “devolved Britain”.Yet, few have paid attention to the English case. However, the constitutional asymmetry thus created has indeed also affected England. When Celtic MPs succeed to influence the outcome of votes on exclusively English matters, one can realise that there is no such thing as an English government. Therefore, some English MPs have felt the need to ask for an option of “English Votes on English Laws”. This article tries to demonstrate that a feeling of “resentment” emerges from this situation and leads to the birth of a new “English” nationalism, entirely dedicated to obtaining an English Parliament.

  18. La mosquée en Algérie.Figures nouvelles et pratiques reconstituées

    Directory of Open Access Journals (Sweden)

    Abderrahmane Moussaoui

    2012-07-01

    Full Text Available La « globalisation » des discours de la mosquée casse les frontières érigées historiquement par les différentes écoles, et tend à réduire la fracture inaugurale entre sunnisme et chiisme. Aujourd’hui il y a un retour à la Salafiya qui ne reconnaît que les fondamentaux. Tout le reste est considéré comme de l’ordre de l’historique et donc non sacré et à ce titre susceptible d’être laissé de côté ou changé. La Salafiya continue cependant à être divisée entre djâmida et djihâdiya.Les pratiques au sein de la mosquée procèdent également par pluralisation où l’individu cherche à la fois à signaler son individualité mais aussi à s’inscrire dans des tendances plus globales. Les récits de vie de différents imams laisse transparaître une sorte de sécularisation interne de la mosquée et une plus grande latitude dans la ré interprétation de l’initial.Les changements sont perceptibles également au niveau des acteurs De nouvelles figures concurrencent celle classique de l’imam. Le prédicateur, sans être une figure tout à fait nouvelle, ni une invention récente, demeure une figure réinventée. Au Maghreb, on connaît l’imam, le mufti, le taleb, mais moins le dâ`îya que les chaînes de télévision à thématique religieuse ont fini par imposer.Ce sont toutes ces transformations qui se déroulent au cœur de l’institution la plus significative de l’Islam que tente d’examiner cette contribution.

  19. Installation of the LHC experimental insertions

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the low-beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  20. INSTALLATION OF THE LHC EXPERIMENTAL INSERTIONS

    CERN Document Server

    Bartolome-Jimenez, S

    2004-01-01

    The installation of the LHC experimental insertions, and particularly the installation of the Low-Beta quadrupoles, raises many technical challenges due to the stringent alignment specifications and to the difficulty of access in very confined areas. The compact layout with many lattice elements, vacuum components, beam control instrumentation and the presence of shielding does not allow for any improvisation in the installation procedure. This paper reviews all the constraints that need to be taken into account when installing the experimental insertions. It describes the chronological sequence of installation and discusses the technical solutions that have been adopted.

  1. Wind profiler installed in Antarctica

    Science.gov (United States)

    Balsley, B. B.; Carey, J.; Woodman, R. F.; Sarango, M.; Urbina, J.; Rodriguez, R.; Ragaini, E.

    A VHF (50 MHz) wind profiler was installed in Antarctica at the Peruvian Base “Machu Picchu” on King George Island from January 21 to 26. The wind profiler will provide a first look at atmospheric dynamics over the region.The profiler—the first of its kind in Antarctica—is a National Science Foundationsponsored cooperative project of the University of Colorado, the Geophysical Institute of Peru, the University of Piura (Peru), and the Peruvian Navy. This venture was also greatly facilitated by Peru's Comision Nacional de Asuntos Antartidos and Consejo Nacional de Ciencias y Tecnologia, with additional logis tics support provided by the Argentinean Navy and the Uruguayan Air Force.

  2. NEMP effects on domestic installation

    International Nuclear Information System (INIS)

    Braun, C.; Clemens, P.; Graf, W.; Guidi, P.; Schmidt, H.U.

    1985-01-01

    The measurements have been made in a building of a psychiatric clinic at Alzey/West Germany. The building has been chosen for the measuring campaign because it has its own electrical installation for mains current supply and emergency power supply, apart from systems of the other buildings. The two supply systems DONNERSBERG could be cut off completely from the other mains systems, so that coupling and feed experiments could be made without mains voltage. Current supply to the measuring systems was done by means of extension cables, or by batteries. The wiring for connection to the room circuits is parallel to the exterior wall, so that measurements could be done by using a frame antenna placed outside of the building parallel to the exterior wall. (orig./DG) [de

  3. New methods and applications in emission spectroscopy (1960); Methodes et applications nouvelles en spectroscopie d'emission (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Baudin, G [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

    1960-07-01

    Emission spectroscopy, are already well-established instrumental analytical technique, has in recent years known important developments. Two mains factors are responsible; firstly the demands of metallurgy for purer and purer materials or alloys which are increasingly complex and difficult to analyse by chemical means; secondly, progress in optics, especially in the production of gratings, and in electronics in the field of photomultiplier tubes. We will not here catalogue all the new applications and methods, but we will consider a few amongst the most representative outside the conventional field. (author) [French] La spectroscopie d'emission, technique analytique instrumentale deja ancienne, a pris, depuis quelques annees, une extension notable. Deux facteurs principaux ont contribue a ce succes: d'une part, l'exigence de la metallurgie en materiaux de plus en plus pur ou en alliages de plus en plus complexes, difficiles a analyser chimiquement, d'autre part, les progres realises en optique, principalement dans la fabrication des reseaux, et en electronique dans le domaine des tubes photomultiplicateurs. Nous ne ferons pas ici le recensement de toutes les applications ou methodes nouvelles, mais nous en choisirons quelques unes des plus representatives hors du domaine classique. (auteur)

  4. Video Installation, Memory and Storytelling: the viewer as narrator

    Directory of Open Access Journals (Sweden)

    Diane Charleson

    2011-05-01

    cerveau assimile l'expérience à la fois sous forme de mots et d'images. Gibosn (2002 quant à lui souligne que la "cognition visuelle" est un processus qui nous fait défiler des séquences d'images dans notre esprit au moment où nous tentons de donner une signification à ce que nous vivions. Il rattache ce phénomène psychologique à certains aspects théoriques et pratiques du montage cinématographique, jusqu'à suggérer que le pouvoir du cinéma est lié à nos expériences mémorielles les plus profondes, en rapport avec les plaisirs les plus forts de l'enfance et avec la possibilité d'explorer sa propre identité. Cet article analyse le rôle que les installations vidéo peuvent jouer dans la création d'un contexte ouvert, attrayant, non-menaçant et immersif où les spectateurs peuvent dépasser le quotidien, réfléchir sur leurs propres souvenirs et se rappeler leurs propres histoires personnelles. Selon moi, il existe un lien symbiotique entre le spectateur comme flâneur et le producteur de l'œuvre, qui rend possible une nouvelle façon de raconter une histoire à travers de nouveaux types de rapports.

  5. A new generation of wind turbines; Une nouvelle generation d'eoliennes

    Energy Technology Data Exchange (ETDEWEB)

    Nica, H. [Tesnic, Laval, PQ (Canada)

    2008-06-15

    Although homeowners have expressed a desire to use wind energy to supply their electricity needs, many technical barriers have stood in the way of installing wind turbines in urban settings. This was due in part to three-bladed vertical axis turbines, high technical costs, limited performances in urban settings and questionable aesthetics. Tesnic has considered these issues and proposed a completely different turbine that uses a different method for extracting energy from the wind. The first approved 3.6 kW model should appear by the end of 2009. This new turbine is based on the same principal of the steam turbine patented in 1913 by Nikola Tesla. Instead of having blades, the Tesla turbine used closely spaced parallel disks and was recognized as being very robust with a high efficiency rating. Tesnic's new wind powered turbine is a vertical axis turbine with a series of valves that directs the wind on a rotor assembly of disk space. A series of blades on its circumference redirects the wind through the assembly of discs and accelerates the rotation of the rotor. The turbine extracts the wind energy in several ways, including conventional drag and lift, adherence and the vortex effect. This gives a 50 per cent added value of efficiency compared to other wind powered turbines. The global market for small wind powered energy is in full expansion. It has been projected that small turbines with 1 kW capacity will be abundant by 2020. It was noted that for household wind powered energy, the market must consider issues of cost, low maintenance, noise pollution, visual aesthetics, durability and safety. Wind energy can also be used in several industries, including plastics, composites, light metals, textiles and electronics. 2 figs.

  6. Spectrometric assembly for portable installations

    International Nuclear Information System (INIS)

    Kluger, A.; Popescu, C.

    1997-01-01

    The components of the portable spectrometric assembly are: - the detecting probe with Na I(Tl) crystal and air-tight case of industrial type; - a microcomputer; - a unit of analogical processing of the signal from the detecting probe; - a single-channel analyzer with adjustable threshold; - commands and display module; - a source of high voltage; - an electrical supply battery. The device uses the method of gamma photons detection in energetic windows. Through theoretical and experimental studies carried out during the prototype development phase, the superiority of this method has been proved as compared with the installations which make use of the classical principle of photon integral detection. The achieved prototype has a basic program enabling the setting of all working parameters (measuring time, discriminating thresholds, discriminators operating conditions, etc.). Through the included interface RS232 it is possible to transmit the data to a more powerful computer in order to continually process the results. The spectrometric assembly, realized on the basis of micro-computers, can be used in a wide range of applications: measurement of thickness and erosion of walls and tubes, measurement of level in closed containers, of soil density, etc. The adjustment for specific application is performed only through a program modification. (authors)

  7. Installations having pressurised fluid circuits

    International Nuclear Information System (INIS)

    Rigg, S.; Grant, J.

    1977-01-01

    Reference is made to nuclear installations having pressurised coolant flow circuits. Breaches in such circuits may quickly result in much damage to the plant. Devices such as non-return valves, orifice plates, and automatically operated shut-off valves have been provided to prevent or reduce fluid flow through a breached pipe line, but such devices have several disadvantages; they may present large restrictions to normal flow of coolant, and may depend on the operation of ancillary equipment, with consequent delay in bringing them into operation in an emergency. Other expedients that have been adopted to prevent or reduce reverse flow through an upstream breach comprise various forms of hydraulic counter flow brakes. The arrangement described has at least one variable fluid brake comprising a fluidic device connected into a duct in the pressurised circuit, the device having an inlet, an outlet, a vortex chamber between the inlet and outlet, a control jet for introducing fluid into the vortex chamber, connections communicating the inlet and the outlet into one part of the circuit and the control jet into another region at a complementary pressure so that, in the event of a breach in the circuit in one region, fluid passes from the other region to enter the vortex chamber to stimulate pressure to create a flow restricting vortex in the chamber that reduces flow through the breach. The system finds particular application to stream generating pressure tube reactors, such as the steam generating heavy water reactor at UKAEA, Winfrith. (U.K.)

  8. ALARA in European nuclear installations

    International Nuclear Information System (INIS)

    Lefaure, C.; Croft, J.; Pfeffer, W.; Zeevaert, T.

    1995-01-01

    For over a decade the Commission of the European Community has sponsored research projects on the development and practical implementation of the Optimization principle, or as it is often referred to, ALARA. These projects have given rise to a series of successful international Optimization training courses and have provided a significant input to the periodic European Seminars on Optimization, the last one of which took place in April 1993. This paper reviews the approaches to Optimization that have development within Europe and describes the areas of work in the current project. The on-going CEC research project addresses the problem of ALARA and internal exposures, and tries to define procedures for ALARA implementation, taking account of the perception of the hazard as well as the levels of probability of exposure. The relationships between ALARA and work management, and ALARA and decommissioning of installations appear to be other fruitful research areas. Finally, this paper introduces some software for using ALARA decision aiding techniques and databases containing feed back experience developed in Europe

  9. ALARA in European nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    Lefaure, C. [CEPN, Fontenay-Aux-Roses (France); Croft, J. [NRPB, Chilton, Didcot (United Kingdom); Pfeffer, W. [GRS, Koeln (Germany); Zeevaert, T. [SCK/CEN, Mol (Belgium)

    1995-03-01

    For over a decade the Commission of the European Community has sponsored research projects on the development and practical implementation of the Optimization principle, or as it is often referred to, ALARA. These projects have given rise to a series of successful international Optimization training courses and have provided a significant input to the periodic European Seminars on Optimization, the last one of which took place in April 1993. This paper reviews the approaches to Optimization that have development within Europe and describes the areas of work in the current project. The on-going CEC research project addresses the problem of ALARA and internal exposures, and tries to define procedures for ALARA implementation, taking account of the perception of the hazard as well as the levels of probability of exposure. The relationships between ALARA and work management, and ALARA and decommissioning of installations appear to be other fruitful research areas. Finally, this paper introduces some software for using ALARA decision aiding techniques and databases containing feed back experience developed in Europe.

  10. ID Barrel installed in cryostat

    CERN Multimedia

    Apsimon, R.; Romaniouk, A.

    Wednesday 23rd August was a memorable day for the Inner Detector community as they witnessed the transport and installation of the central part of the inner detector (ID-barrel) into the ATLAS detector. Many members of the collaboration gathered to witness this moment at Point 1. After years of design, construction and commissioning, the outer two detectors (TRT and SCT) of the ID barrel were moved from the SR1 cleanroom to the ATLAS cavern. The barrel was moved across the car park from building 2175 to SX1. Although only a journey of about 100 metres, this required weeks of planning and some degree of luck as far as the weather was concerned. Accelerometers were fitted to the barrel to provide real-time monitoring and no values greater than 0.1 g were recorded, fully satisfying the transport specification for this extremely precise and fragile detector. Muriel, despite her fear of heights, bravely volunteered to keep a close eye on the detector. Swapping cranes to cross the entire parking lot, while Mur...

  11. Civilian protection and Britain's commercial nuclear installations

    International Nuclear Information System (INIS)

    1981-01-01

    The subject is treated as follows: initial conclusions (major nuclear attack on military installations; nuclear attack including civil nuclear targets; conventional attack on civil nuclear installations); nature of nuclear weapons explosions and power reactor releases (general; dose effects and biologically significant isotopes; nuclear weapon effects; effect of reactors and other fuel-cycle installations in a thermonuclear area; implications of reactor releases due to conventional attack, sabotage, civil disorder or major accident). (U.K.)

  12. Modern electrical installation for craft students

    CERN Document Server

    Scaddan, Brian

    2013-01-01

    Modern Electrical Installation for Craft Students, Volume 2, Third Edition discusses several topics concerning electrical installations. The book is comprised of eight chapters that deal with craft theory, associated subjects, and electrical industries. Chapter 1 covers inductors and inductance, while Chapter 2 tackles capacitors and capacitance. Chapter 3 deals with inductance and capacitance in installation work. The book also discusses cells, batteries, and transformers. The electrical industries, control and earthing, and testing are also dealt with. The last chapter discusses the basic el

  13. Current status and installation of dental PACS

    International Nuclear Information System (INIS)

    Park, Chang Seo; Kim, Kee Deog; Park, Hyok; Jeong, Ho Gul

    2004-01-01

    Picture Archiving and Communication System (PACS) is difficult to implement in the best of situations, but evidence is growing that the benefits are significant. The aims of this study are to analyze the current status of full PACS and establish successful installation standard of dental PACS. Materials and Methods were based on the investigation of current working status and installation standard of PACS, and observation of variable issues to installation of dental PACS. By September 30, 2004, full PACS implementations in their facilities were 88.1% in specialized general hospitals (37 installations out of total 42 hospitals), 59.8% in general hospitals (144 installations out of total 241 hospitals), 12.3% in medical hospitals (116 installations out of total 941 hospitals) and 3.6% in dental hospitals (4 installations out of total 110 hospitals). Only 4 university dental hospitals currently have installed and are operating full PACS. Major obstacle to wide spread of dental PACS is initial high investments. Clinical environments of dental PACS differed from medical situation. Because of characteristic dental practice, the initial investments for dental PACS are generally much greater than those of medical PACS. Also new economic crisis makes users scruple. The best way to overcome these limitations is to establish an economic installation standard for dental PACS. Also the clear technical communication between the customer and the supplier before both sides are committed to the obstacles are critical to its success.

  14. Safety of nuclear installations in Slovakia

    International Nuclear Information System (INIS)

    1998-01-01

    In this part next aspects are described: (1) Site selection (Legislation related to site selection; Meeting criteria at Bohunice and Mochovce sites; International agreements); (2) Design preparation and construction (Designing and construction-relevant legislation; Nuclear installation project preparation of nuclear installation at Mochovce site); (3) Operation (Operator licensing procedure; Operation limits and conditions; Maintenance testing and control documentation for management and operation; Technical support of operation; Analysis of events at nuclear installations and Radioactive waste production); (4) Planned safety upgrading activities at nuclear installations

  15. 14 CFR 171.9 - Installation requirements.

    Science.gov (United States)

    2010-01-01

    ...) The facility must be installed according to accepted good engineering practices, applicable electric... a power distribution system or locally generated, with a supplemental standby system, if needed. (c...

  16. Nouvelles Techniques d'Intervention sur la Corrosion des Armatures du Béton Armé

    CERN Document Server

    Colloca, C

    1999-01-01

    Les principaux dégâts constatés dans les armatures passives du béton armé sont la corrosion généralisée et la corrosion locale. Ces dégradations sont provoquées soit par la carbonatation du béton soit par le contact avec l'eau pure ou l'eau chargée de chlorures pénétrant dans les pores et dans les fissures de surface. Ce document présente de nouvelles techniques d'intervention, fondées sur d'anciens principes, introduites pour le traitement électrochimique des zones altérées liées aux différentes conditions. La réalcalinisation (dans le cas de béton carbonaté) permet d'augmenter le pH du béton et de rétablir un niveau de basicité garantissant la passivation de l'armature. La désalification (dans le cas de béton entamé par les chlorures) provoque l'élimination des ions chlorure à travers la surface du béton. Les avantages de ces traitements, par rapport aux anciennes techniques, sont appréciables si l'on considère la durée d'exécution et leur coût moins élevé.

  17. 49 CFR 393.30 - Battery installation.

    Science.gov (United States)

    2010-10-01

    ... NECESSARY FOR SAFE OPERATION Lamps, Reflective Devices, and Electrical Wiring § 393.30 Battery installation... 49 Transportation 5 2010-10-01 2010-10-01 false Battery installation. 393.30 Section 393.30 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY...

  18. Installation package for the Solaron solar subsystem

    Science.gov (United States)

    1979-01-01

    Information that is intended to be a guide for installation, operation, and maintenance of the various solar subsystems is presented. The subsystems consist of the following: collectors, storage, transport (air handler) and controller for heat pump and peak storage. Two prototype residential systems were installed at Akron, Ohio, and Duffield, Virginia.

  19. Data Acquisition System On Beta Installation

    International Nuclear Information System (INIS)

    Abtokhi, Ahmad; Nurhanan; Sudarno; Sumarno, Edy

    2000-01-01

    Data acquisition system is needed on every installation. This is important used to monitoring and processing data to get information desired. This system applied to β installation which is facility to carry out experiments on accident condition like as reflooding phenomena in test section. The 16 exp.th channel data acquisition system is drived by ADC 0804 and programme application DELPHI

  20. ATLAS semiconductor tracker installed into its barrel

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    The ATLAS silicon tracker is installed in the silicon tracker barrel. Absolute precision was required in this operation to ensure that the tracker was inserted without damage through minimal clearance. The installation was performed in a clean room on the CERN site so that no impurities in the air would contaminate the tracker's systems.

  1. Demographic characteristics of nuclear installations sites

    International Nuclear Information System (INIS)

    Doumenc, A.; Faure, J.

    1988-01-01

    The selection of a nuclear installations sites can not be conceived without a deep analysis of demographic context. This analysis permits to define the critical populations around the installation and is an essential element of emergency plans. 1 tab., 2 refs. (F.M.)

  2. Using game engines in mixed reality installations

    NARCIS (Netherlands)

    Nakevska, M.; Vos, E.C.; Juarez, Alex; Hu, J.; Langereis, G.R.; Rauterberg, G.W.M.; Anacleto, J.; Fels, S.; Graham, N.; et al., xx

    2011-01-01

    In a mixed reality installation, a variety of technologies is integrated such as virtual reality, augmented reality, and animated virtual agents and robotic agents. One of the main challenges is how to design and implement a mixed reality installation that integrates a heterogeneous array of sensors

  3. Installed water resource modelling systems for catchment ...

    African Journals Online (AJOL)

    Following international trends there are a growing number of modelling systems being installed for integrated water resource management, in Southern Africa. Such systems are likely to be installed for operational use in ongoing learning, research, strategic planning and consensus-building amongst stakeholders in the ...

  4. Installation Service - Changes in opening hours

    CERN Multimedia

    GS Department

    2010-01-01

    For organizational matters, please note that, as from 15 March 2010, the Installation Service will have wen opening hours. The new schedule will be from 14:00 to 17:00 (Monday to Friday). Contact persons are: Martine Briant, Karine Robert and Claudia Bruggmann. The office address remains 73-3-014. Installation Service

  5. Public perception of nuclear installations

    International Nuclear Information System (INIS)

    Kiipper, Felipe de Moura

    2011-01-01

    The key for nuclear renaissance is public acceptance. Facing energetic needs that occur around the world and lack of resources, the work of characterizing and proposing new models to represent public opinion is extremely important to all stakeholders. Even though public opinion's study on risks is relatively recent, may approaches of this subject have been suggested and presented, especially for the topic of perceptions on nuclear installations. Actual definitions on risk exist between objective and subjective models, that reflect opinions of lay public and experts. Strategies on communications with the public may be evaluated from many developed models, and its results may be registered. The use of structural models may present an exploratory character as well as confirmatory theories, as an adequate tool for the development of studies on public perception. In this work, a structural model is presented from data obtained in a previous report, and added to data collected before and after the Fukushima nuclear accident, in Japan. The effects developed from this accident offered a unique opportunity to study public opinion through the effects of a serious nuclear accident and its effects on risk communications. Aside, this work attempted to check the structural model according with obtained results, in order to sustain a constant improvement of the working tools. Yet, a comparison between data according to experts' respondents and lay public ones as well as a comparison among different students before and after a visit to nuclear station is considered. Obtained data for the structural models has been applied for on a structural model and analyzed by structural correlation matrix, latent variable structural coefficients and R 2 values. Results indicate that public opinion maintains its rejection on nuclear energy and the perception of benefits, facing perceived risks before the accident, has diminished. A new model that included a latent variable for corresponding

  6. New method of determining the thermal utilization factor of a cell; Nouvelle methode de determination du facteur d'utilisation thermique d'une cellule

    Energy Technology Data Exchange (ETDEWEB)

    Amouyal, A; Benoist, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1956-07-01

    A new formula for the thermal utilization factor is derived, which, while comparable in simplicity to the formula given by elementary diffusion theory, furnishes much more precise results. This is clearly brought out by comparison with the results given by the S{sub n} and spherical harmonics methods. (author) [French] Une nouvelle expression du facteur d'utilisation thermique, d'une simplicite comparable a celle de Ia theorie elementaire, est etablie. La comparaison avec les resultats fournis par la methode S{sub n} et les methodes d'harmoniques spheriques montre que la precision obtenue par cette formule est tres superieure a celle que donne la theorie elementaire. (auteur)

  7. Yankaya Dilek, La nouvelle bourgeoisie islamique. Le modèle turc, Presses universitaires de France, coll. Proche Orient, 2013, 216 p.

    OpenAIRE

    Özatalay , Cem

    2014-01-01

    International audience; Paru en mars 2013, le livre de Dilek Yankaya intitulé La nouvelle bourgeoisie islamique. Le modèle turc apporte une contribution remarquable pour comprendre les dynamiques sociales qui sous-tendent la polarisation politique et culturelle qui marque tout autant l’histoire récente de la Turquie que les événements de Gezi. En mettant en lumière les aspirations et la conscience de classe de la bourgeoisie islamique en formation, Yankaya essaie de montrer dans son ouvrage c...

  8. MOOCs et mobilités étudiantes : vers une nouvelle circulation des connaissances ? Observations au regard de l&8217;Afrique francophone

    OpenAIRE

    Meyer, Jean-Baptiste

    2017-01-01

    Les discours actuels sur l'internationalisation de l'enseignement supérieur font grand cas des cours à distance en diffusion libre et massive. Ils offrent des possibilités nouvelles de transmettre des connaissances élaborées, à un grand nombre de personnes, et sans recours à d'autres supports qu'un ordinateur connecté. Ces modalités en font un outil prometteur de transfert ou de partage international, puisque les frontières des pays sont effacées par la transmission numérique. Elles peuvent d...

  9. Buckling of Bucket Foundations During Installation

    DEFF Research Database (Denmark)

    Madsen, Søren

    There is a great politically will to expand the green energy market in these times. A proven green technology is wind turbines. Wind turbines have been installed in great numbers on land over the last decades. However, the current development in wind turbine design leads to larger turbine sizes...... in order to reduce the cost of energy. This limits the on land application due to transportation limitations and unwillingness from prospect neighbours. Thus, offshore wind energy started developing over the last couple of years. Although installing the wind turbines offshore resolves the before men tioned...... issues, it brings up the cost of energy mainly due to increased installation and maintenance costs. A very large part—up to 30–50% using current technology—of the installation cost origins from the expenses related to the installation of foundations. A new foundation concept—the bucket foundation...

  10. Wind turbine arrays at Murdochville : socio-economic impacts and industrial reconversion; Parcs eoliens a Murdochville : retombees socio-economiques et reconversion industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Lemieux, A. [Town of Murdochville, PQ (Canada)

    2006-07-01

    The region surrounding Murdochville, Quebec is ideally suited for wind energy projects. The existing economic structure of Murdochville was discussed with reference to the socio-economic impact that the development of the 108 MW wind turbine array will have on the community. Murdochville was a mono-industrial copper mining town. From 1999 to 2002, 600 jobs were lost with the closure of the mine and smelter. The current economy is based on information and communication technologies, wind energy, recreational tourism, public services and the commercial sector. In addition to promoting wind energy development, Murdochville's economic strategy in terms of developing renewable energy technologies is to promote forest biomass and geothermal energy, the use of the heat transfer properties of thermal groundwater. This presentation emphasized the town's quality labour force as well as its development strategy for fibre optics use at the SAAQ (Quebec Automobile Insurance Society) call centre. In addition to creating new jobs and a research and development center on wind energy technologies for northern conditions, the installation of the 108 MW wind turbine array at Murdochville has boosted the local economy by creating a series of recreational trails. The town is now a hub for downhill skiing and a variety of recreational trails for snowmobiling.

  11. Planning of installations in prefabricated buildings

    Directory of Open Access Journals (Sweden)

    Stanojević Ana D.

    2014-01-01

    Full Text Available Planning installations is becoming an increasing problem in construction, because the number of devices for technical supply is constantly increasing with continual progress in science and technology. Since the installations of the building can not be viewed unrelated of the construction, problem of its planning is more complicated in prefabricated buildings because the elements of construction are prefabricated. Planning was formerly performed by embedding the installation in prefabricated elements. This method had a lot of flaws, and modern approach tends setting installation out of prefabricated elements except when the traditional approach proves as economical. Although the hot water heating with radiators is the most practical way of heating in prefabricated buildings, the under floor heating systems have greater and greater use. Today, prefabricated sanitary cabins have a huge use and they are much more economical in comparison to special panels for bathrooms that were once create. Approaches in terms of planning electrical installation are different, but for conventional constructed buildings, as well as prefabricated buildings, the use of lightweight prefabricated walls with embedded installations, today is recommended, when the room is loaded with a large number of this installations and if it is possible.

  12. A novel method for coiled tubing installation

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Peter J. [2H Offshore, Houston, TX (United States); Tibbetts, David [Aquactic Engineering and Construction Ltd., Aberdeen (United Kingdom)

    2009-12-19

    Installation of flexible pipe for offshore developments is costly due to the physical cost of the flexible pipe, expensive day rates and the availability of suitable installation vessels. Considering the scarcity of flexible pipe in today's increasingly demanding and busy market, operators are seeking a cost effective solution for installing piping in a range of water depths using vessels which are readily on hand. This paper describes a novel approach to installing reeled coiled tubing, from 1 inch to 5 inch diameter, from the back of a small vessel in water depths from 40 m up to around 1000 m. The uniqueness of the system is the fact that the equipment design is modular and compact. This means that when disassembled, it fits into standard 40 ft shipping containers, and the size allows it to be installed on even relatively small vessels of opportunity, such as anchor handling or installation vessels, from smaller, and cheaper quay side locations. Such an approach is the ideal solution to the problem faced by operators, in that it allows the installation of cheaper, readily available coiled tubing, from cost-effective vessels, which do not need to transit to a pick up the system. (author)

  13. Offshore Cable Installation - Lillgrund. Lillgrund Pilot Project

    Energy Technology Data Exchange (ETDEWEB)

    Unosson, Oscar [Vattenfall Vindkraft AB, Stockholm (Sweden)

    2009-01-15

    This report describes the installation method and the experiences gained during the installation of the submarine cables for the offshore wind farm at Lillgrund. The wind farm consists of 48 wind turbines and is expected to produce 0.33 TWh annually. Different aspects of the installation, such as techniques, co-operation between the installation teams, weather conditions and regulatory and environmental issues are described in this report. In addition, recommendations and guidelines are provided, which hopefully can be utilised in future offshore wind projects. The trenches, in which the submarine cables were laid, were excavated weeks before the cable laying. This installation technique proved to be successful for the laying of the inter array cables. The export cable, however, was laid into position with difficulty. The main reason why the laying of the export cable proved more challenging was due to practical difficulties connected with the barge entrusted with the cable laying, Nautilus Maxi. The barge ran aground a number of times and it had difficulties with the thrusters, which made it impossible to manoeuvre. When laying the inter array cables, the method specification was closely followed, and the laying of the cables was executed successfully. The knowledge and experience gained from the offshore cable installation in Lillgrund is essential when writing technical specifications for new wind plant projects. It is recommended to avoid offshore cable installation work in winter seasons. That will lower the chances of dealing with bad weather and, in turn, will reduce the risks

  14. Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Elizabeth H.; Schindel, Kay (City of Madison, WI); Bosiljevac, Tom; Dwyer, Stephen F.; Lindau, William (Lindau Companies, Inc., Hudson, WI); Harper, Alan (City of Madison, WI)

    2011-12-01

    Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systems are properly specified and installed with respect to the continuing structural integrity of the building.

  15. Seismic studies for nuclear installations sites

    International Nuclear Information System (INIS)

    Mohammadioun, B.; Faure, J.

    1988-01-01

    The french experience in seismic risks assessment for french nuclear installations permits to set out the objectives, the phases the geographic extensions of workings to be realized for the installation safety. The data to be collected for the safety analysis are specified, they concern the regional seismotectonics, the essential seismic data for determining the seism level to be taken into account and defining the soil movement spectra adapted to the site. It is necessary to follow up the seismic surveillance during the installation construction and life. 7 refs. (F.M.)

  16. Risk assessment techniques for industrial installations

    International Nuclear Information System (INIS)

    Croitoru, C.; Dumitrescu, M.; Preda, I.; Stefanescu, I.; Titescu, G.

    1995-01-01

    This paper presents a risk analysis which concerns the following stages: identification of the initiation events, evaluation of the occurrence frequency of different accident sequences, assessment of human, economical, and environmental consequences, risk assessment and management. The study of the accident sequences subsequent to an initiation event was achieved by the event tree method. Also, there were developed methods based on mathematical models of installations which take into account reliability data, data concerning the exploitation history, and data referring to the human factor effects in the installation operation. These methods were used for the determination of occurrence frequencies of hydrogen sulfide emission accidents in the heavy water production installations

  17. Installation for producing sealed radioactive sources

    International Nuclear Information System (INIS)

    Fradin, J.; Hayoun, C.

    1969-01-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [fr

  18. Tecnologie dell’informazione e nuovi processi di vittimizzazione / Nouvelles technologies et processus de victimisation / Information technologies and new processes of victimisation

    Directory of Open Access Journals (Sweden)

    Marotta Gemma

    2012-08-01

    Full Text Available New technologies, on the one hand, have produced undeniable positive effects, from the acceleration of cultural diffusion to the communication between "worlds" previously unknown; on the other hand, they have become now an instrument to commit new crimes and deviants acts.In the article we will discuss the processes of victimization related to specific offenses (digital identity theft, online paedopornography, cyberstalking and to new forms of addiction due to the new media. The aim is to highlight the dangers of the misuse or abuse of new technologies.S'il est vrai que les nouvelles technologies de communication ont produit des effets positifs indéniables, comme l'accélération de la diffusion culturelle et l'échange entre « mondes » jusque-là inconnus, elles n'en sont pas moins devenues un moyen de commettre des actes déviants et criminels nouveaux.Cet article expose les processus de victimisation liés à certains crimes (comme l'usurpation d'identité, la pédopornographie en ligne, le cyber-harcèlement, et de nouvelles formes de dépendance, afin de mettre en évidence les dangers d'un usage pervers ou délictueux des nouveaux médias.

  19. Un littoral sableux en progradation : le lido entre Leucate et Port-la-Nouvelle (Aude, Golfe du Lion, France

    Directory of Open Access Journals (Sweden)

    Jean-Pierre Larue

    2009-11-01

    Full Text Available L'étude multichronique de photographies aériennes révèle que le lido entre Leucate et Port-la-Nouvelle (Aude a progradé d'environ 15 % en largeur, entre 1952 et 2008. L'analyse sédimentologique permet de montrer que cette progradation exceptionnelle en période d'élévation du niveau marin est due à la présence de barres pré-littorales volumineuses et bien alimentées par la dérive littorale et le transport éolien effectué par les vents de terre. Cependant, du fait de la montée actuelle du niveau marin (2,5 à 3 mm/an et malgré la poursuite de l'accrétion, le lido subit des inondations de plus en plus fréquentes entre le cordon actuel et l'ancien cordon romain.A kinematic study of vertical aerial photos taken between 1952 and 2008 reveals that the Leucate-Port-la-Nouvelle lido (Aude has prograded of about 15 % in width. A sedimentological analysis allows us to explain this accretion caused by drift and wind which supply abundant nearshore bars. In spite of this progradation, frequent floodings, favoured by sea level rise (2.5 to 3 mm-1.year, occur between the present coastal bar and the Roman barrier.

  20. Une Nouvelle Forme d’Autobiographie dans Les Années d’Annie Ernaux: Autobiographie Impersonnelle

    Directory of Open Access Journals (Sweden)

    Seçil Yücedağ

    2017-12-01

    Full Text Available Annie Ernaux, considérée comme l’une des femmes écrivaines les plus célèbres du XXIe siècle, a exprimé l’angoisse commune de son âge et de son passé en rédigeant Les Années. Elle n’avait pas non seulement le but de décrire sa vie, mais aussi d’esquisser l’histoire de la société française à laquelle elle appartient. Lorsqu’elle est venue au monde en 1940, le monde était au seuil de la Seconde Guerre mondiale. Etant élevée dans cette atmosphère chaotique, elle a appris beaucoup de choses de sa société, de sa famille et de son environnement. Annie Ernaux a découvert le monde comme une jeune fille, une mère, une épouse et une grand-mère. Ses expériences sociales et familiales l’ont beaucoup mûrie et elle a commencé à rédiger ses pensées. Ses souvenirs ont fait partie de ses écritures autobiographiques. Dans Les Années, Annie Ernaux a profité de toutes ses expériences personnelles et sociales avec de différents moyens. Elle a essayé d’établir des liens entre l’histoire de sa vie et celle de la société. Elle a accordé une importance à la vie sociale plutôt que sa propre vie dans Les Années. Elle y a développé des propres techniques d’écriture en se servant des photos familiales et personnelles, d’un film, d’une vidéo, des marques de publicité, des chansons, d’un tableau, des notes de journal ainsi que des événements sociologiques et historiques. Elle a ainsi créé une nouvelle forme d’autobiographie : autobiographie impersonnelle.

  1. Nouvelle manga, mon amour. Reflexiones sobre la narración gráfica de historias cotidianas

    Directory of Open Access Journals (Sweden)

    Olalla Hernández Ranz

    2010-03-01

    Full Text Available Desde sus primeras manifestaciones hace más de un siglo, el cómic se ha ido consolidando como un género popular sobretodo dirigido a un lector juvenil. Su evidente atractivo entre los lectores ha hecho que algunos padres, educadores y profesionales del ámbito de la promoción de la lectura se plantearan el por qué de dicha afición, llegando a conclusiones erróneas como la creencia de que se trata de una lectura menor, dirigida esencialmente a la pura distracción de quien los lee. El manga, en concreto, es el género dentro del cómic que más se consume en occidente. Se ha convertido en un fructífero producto de mercado que deriva en videojuegos, series de televisión, películas de cine… Su gran acogida entre el público infantil y juvenil preocupa a mediadores por la supuesta carga violenta y sexual y la baja calidad literaria de sus obras. El presente propuesta tratará de deshacer algunos tópicos en relación con la concepción errónea la historieta nipona, a partir del estudio de un corpus de obras creadas por autores japoneses y europeos que quieren aportar un cómic de calidad tanto en su forma como en el contenido, abriendo así las puertas a nuevas investigaciones de gran interés. La Novelle manga es un nuevo género dentro del cómic nipón que aúna las estrategias comunicativas más destacables de las novelas gráficas japonesas, el valor estético del cómic francés y la sencillez y el tono de las películas de cine francés dentro de la Nouvelle Vague para crear un cómic que narra historias cotidianas de gran valor literario y estético, muy recomendable para lectores juveniles y adultos.

  2. RF accelerating unit installed in the PSB

    CERN Multimedia

    CERN PhotoLab

    1972-01-01

    RF accelerating unit installed in the PSB ring between two bending magnets. Cool air from a heat exchanger is injected into the four cavities from the central feeder and the hot air recirculated via the lateral ducts.

  3. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system. Here we see the transport vehicle alongside the magnet supports. Visible in the background is the first magnet in place.

  4. Decommissioning and dismantling of nuclear installations

    International Nuclear Information System (INIS)

    Pelzer, N.

    1993-01-01

    The German law governing decommissioning and dismantling of nuclear installations can be called to be embryonic as compared to other areas of the nuclear regulatory system, and this is why the AIDN/INLA regional meeting organised by the German national committee in July 1992 in Schwerin has been intended to elaborate an assessment of the current legal situation and on this basis establish proposals for enhancement and development, taking into account the experience reported by experts from abroad. The proceedings comprise the paper of the opening session, 'Engineering and safety aspects of the decommissioning of nuclear installations', and the papers and discussions of the technical sessions entitled: - Comparative assessment of the regulatory regimes. - Legislation governing the decommissioning of nuclear installations in Germany. - Analysis of the purpose and law making substance of existing regulatory provisions for the decommissioning of nuclear installations. All seventeen papers of the meeting have been prepared for separate retrieval from the database. (orig./HSCH) [de

  5. Culture safety in the nuclear installation

    International Nuclear Information System (INIS)

    Benar Bukit

    2008-01-01

    Culture safety is aimed to empower all the personnel to contribute and responsible to the installation safety where they work in. Culture safety is important as there were so many accidents happened due to the little attention given to the safety, take as examples of what happened in Three Mille Island installation (1979) and Chernobyl (1986). These remind us that human factor gives a significant contribution to the failure of operational system which influences the safety. Therefore, as one of institutions which has nuclear installation. National Nuclear Energy Agency must apply the culture safety to guarantee the safety operation of nuclear installation to protect the personnel, community and environment from the hazard of radioactive radiation. Culture safety has two main components. The first component under the management responsibility is a framework needed in an organisation. The second component is the personnel attitude in al/ levels to respond and optimize those framework. (author)

  6. Design, fabrication and installation of irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C. [and others

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs.

  7. Notes on LED Installations in Street Illumination

    Directory of Open Access Journals (Sweden)

    Elisabeta Spunei

    2014-09-01

    Full Text Available The paper presents a study made on choosing LED street lighting installations, such that the quality requirements for exterior artificial lighting are fulfilled. We analyze two types of LED street lighting installations from a technical point of view, together with lighting level and brightness values obtained during the measurements. Following on the field measurements, the lighting quality parameters are calculated, and, for the lighting installation with the best performance, optimal mounting suggestions are made. The optimal quality parameters are calculated by simulations using the Dialux software. The same software and the same light sources we also compute an optimal street lighting by determining the size of the installation that provides the best lighting parameter values.

  8. Radioelement gauges. Appliances intended for permanent installation

    International Nuclear Information System (INIS)

    1975-08-01

    The present norm defines for radioelement gauges intended for permanent installation: a classification of instruments and beam shutter devices; recommended construction techniques which satisfy health physics requirements; monitoring and test methods; information which must appear on the instruments [fr

  9. Design, fabrication and installation of irradiation facilities

    International Nuclear Information System (INIS)

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C.

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs

  10. Towards a Framework for Projection Installations

    DEFF Research Database (Denmark)

    Halskov, Kim; Falck, Hans William

    2013-01-01

    Projection installations are part of Spatially Augmented Reality, where the projection medium is used to enrich a fixed, bounded physical space with digital content. Projection technology enables us to turn many kinds of physical objects into displays. In this paper we develop and present...... a conceptual framework that addresses three aspects of a projection installation: the contentassociated with the object, the digital content, and the relation between the two. We conclude the paper with a set of strategies commonly used in projection installations: Enhancing or emphasizing physical aspects......; Transforming materiality; Adding virtual objects; 3D effects; Complex content on simple objects or simple content on complex; Strong versus loose connections between the physical object and the digital content. This paper is based on four cases, two of which concern cultural heritage installations, the others...

  11. The nuclear installations face to their environment

    International Nuclear Information System (INIS)

    Rieu, Ch.; Berge-Thierry, C.; Duval, C.; Bonnet, Ch.; Gaubert, B.; Riffard, Th.; Greffier, G.; Cervantes, J.C.; Le Breton, F.; Clement, C.; Charbonnier, R.; Andreani, A.M.; Maubert, H.; Maisonneuve, A.

    2002-01-01

    This dossier deals with protection of nuclear installations against external risks. The articles come from the presentations of the Conference on 'Nuclear installations and their environment', held by the 'Safety and Environment Protection' Section of the French Nuclear Energy Society on October fifteenth 2002. Floods, earthquakes, winter cold, snow-falls, wind, fires are the main natural risks taken into account. Risks from industrial environment and communication lines are also considered. (author)

  12. A method of installing a reactor container

    International Nuclear Information System (INIS)

    Hayashi, Kenji; Murakawa, Hisao.

    1975-01-01

    Object: To achieve exact installation of a reactor container at a site. Structure: A pole is set upright at the center of a cylindrical base portion, a plurality of beams are disposed around the pole in a radial fashion to form a cone, a plurality of steel plates are mounted successively around the cone through a ring, and the steel plates are welded to each other to assemble and install a reactor container at the same time. (Kamimura, M.)

  13. Solar Panel Installations on Existing Structures

    OpenAIRE

    Tim D. Sass; Pe; Leed

    2013-01-01

    The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

  14. Improving Energy Security for Air Force Installations

    Science.gov (United States)

    Schill, David

    Like civilian infrastructure, Air Force installations are dependent on electrical energy for daily operations. Energy shortages translate to decreased productivity, higher costs, and increased health risks. But for the United States military, energy shortages have the potential to become national security risks. Over ninety-five percent of the electrical energy used by the Air Force is supplied by the domestic grid, which is susceptible to shortages and disruptions. Many Air Force operations require a continuous source of energy, and while the Air Force has historically established redundant supplies of electrical energy, these back-ups are designed for short-term outages and may not provide sufficient supply for a longer, sustained power outage. Furthermore, it is the goal of the Department of Defense to produce or procure 25 percent of its facility energy from renewable sources by fiscal year 2025. In a government budget environment where decision makers are required to provide more capability with less money, it is becoming increasingly important for informed decisions regarding which energy supply options bear the most benefit for an installation. The analysis begins by exploring the field of energy supply options available to an Air Force installation. The supply options are assessed according to their ability to provide continuous and reliable energy, their applicability to unique requirements of Air Force installations, and their costs. Various methods of calculating energy usage by an installation are also addressed. The next step of this research develops a methodology and tool which assesses how an installation responds to various power outage scenarios. Lastly, various energy supply options are applied to the tool, and the results are reported in terms of cost and loss of installation capability. This approach will allow installation commanders and energy managers the ability to evaluate the cost and effectiveness of various energy investment options.

  15. Solar system installation at Louisville, Kentucky

    Science.gov (United States)

    1978-01-01

    The installation of a solar space heating and domestic hot water system is described. The overall philosophy used was to install both a liquid and a hot air system retrofitted to existing office and combined warehouse building. The 1080 sq. ft. office space is heated first and excess heat is dumped into the warehouse. The two systems offer a unique opportunity to measure the performance and compare results of both air and liquid at one site.

  16. The installation and dismantling of electrolytic cells

    International Nuclear Information System (INIS)

    Galushkin, N.V.

    1995-01-01

    This chapter of monograph is devoted to construction of aluminium electrolytic cells, their installation and dismantling. Therefore, the general characteristic and classification of aluminium electrolytic cells was considered. The anode and cathode structure was studied. The lining of cathode casing, the process of collection of anode gases, electrolytic cell cover, and electrical insulation was studied as well. The installation and dismantling of aluminium electrolytic cells was described.

  17. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel.Pho...

  18. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel. Th...

  19. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. The first installation phase will continue until mid-April. In addition to the magnets, a beam dump facility also has to be installed. The second installation phase will take place later this year and should be completed in 2004, when the TI 8 transfer line is due to be tested. The second transfer line, in tunnel TI 2, should be ready in April 2007, once the LHC magnets have been transported through the downstream section of this tunnel. We...

  20. Nouvelles techniques de mise en valeur des ressources d'hydrocarbures New Techniques for Valorising Hydrocarbon Resources

    Directory of Open Access Journals (Sweden)

    Boy De la Tour X.

    2006-11-01

    Full Text Available Après avoir montré l'importance des réserves de pétrole non conventionnel et l'enjeu que représente pour l'humanité la mise en exploitation de ces ressources, cette étude examine les axes actuels de recherches et l'état de la technologie pour chacune des sources de nouveau pétrole retenues : mers profondes, récupération assistée, huiles lourdes et sables asphaltiques, schistes bitumineux et conversion du charbon. Il en ressort que si les ressources de nouveau pétrole sont considérables, leur mise en valeur nécessitera des investissements très lourds, et le coût du pétrole ainsi produit restera élevé, comparé au coût actuel du pétrole conventionnel. Compte tenu des délais de mise en oeuvre, des problèmes technologiques restant à résoudre et de la nécessité de réaliser des pilotes semi-industriels très coûteux pour expérimenter les nouvelles techniques, il convient de consentir sans attendre un effort important de recherche technologique, impliquant un accroissement sensible des budgets de R&D, mais aussi des incitations financières appropriées. Cet effort de mise au point de technologies adaptées à ces sources d'hydrocarbures sera favorisé par les nouvelles conditions économiques créées par la rareté relative des réserves d'hydrocarbures classiques, à condition que les Etats, par leur politique, favorisent la production de ressources d'hydrocarbures à coût élevé. A l'heure actuelle, on peut évaluer la production de pétrole difficile à environ 100 Mt, l'essentiel étant réalisé dans le domaine des huiles lourdes et de la récupération assistée ; on estime que la production de nouveau pétrole pourrait représenter 200 à 350 Mt en 1990 et se situer entre 600 et 900 Mt en 2000, soit 5 à 8 % de la production de pétrole en 1990 et 15 à 20 % en 2000. Un tel objectif nécessiterait des investissements de l'ordre de 500 à 750 milliards de dollars 1980. After pointing out the importance of

  1. The Swiss nuclear installations annual report 1992

    International Nuclear Information System (INIS)

    1993-06-01

    This report concerns the safety of the Swiss nuclear installations in the period of 1992. Surveillance of these installations with regard to nuclear safety, including radiation protection, is among the tasks of the Swiss Federal Nuclear Safety Inspectorate (HSK). In Switzerland five nuclear power plants are operational: Beznau I and II, Muehleberg, Goesgen and Leibstadt. Research reactors of thermal capacities below 10 MWth are operational at the Paul Scherrer Institute (PSI), at the Swiss Federal Institute of Technology Lausanne and at the University of Basle. Further subject to HSK's supervision are all activities at PSI involving nuclear fuel or ionizing radiation, the shut down experimental reactor of Lucens, the exploration in Switzerland of final disposal facilities for radwaste and the interim radwaste storage facilities. The present report first deals with the nuclear power plants and covers, in individual sections, the aspects of installation safety, radiation protection as well as personnel and organization, and the resulting overall impression from the point of view of HSK (chapters 1-4). In chapter 5, the corresponding information is given for the research installations. Chapter 6 on radwaste disposal is dedicated to the waste treatment, waste from reprocessing, interim storage and exploration by the NAGRA. In chapter 7, the status of emergency planning in the nuclear power plants' vicinity is reported. Certificates issued for the transport of radioactive materials are dealt with in chapter 8. Finally chapter 9 goes into some general questions relating to the safety of nuclear installations, and in particular covers important events in nuclear installations abroad. In all, the operation of the Swiss nuclear installations in the period of 1992 is rated safe by HSK. (author) 7 figs., 13 tabs

  2. New technique for landfill leachate well installation

    International Nuclear Information System (INIS)

    Hornsby, R.G.; Miller, M.S.

    1991-01-01

    The installation method fulfilled our expectations. The entire well installation took eight writing days to complete, for an average of two wells per day. It met our Health and Safety, waste volume, environmental risk and uniform sandpack expectations. Health and Safety concerns were minimal. We found that virtually all work could be completed using Level D protection. The volume of waste produced by the well installation was extremely low. The core samples and casing scrapings were the only well installation wastes directly produced. The waste containers which required sampling prior to disposal were: Decontaminated water (330 gallons), Personnel protective equipment and water (715 gallons), Soil cores (25 gallons), Land leachate (440 gallons). Each waste type was sampled and submitted to a laboratory for analyses of full Appendix 3 plus U.S. EPA toxicity parameters. The results verified that all of the wastes could be disposed of on-site. Since the only drilling wastes were the clay core samples and the very small amount of material adhering to the casing, contamination of the new clay cap did not occur. A uniform sandpack was guaranteed through the use of a presanded well screen. The loose sand added when the casing was removed served to fill any voids. All the leachate wells have water in them, and it appears that they will function adequately. We are in the process of constructing a treatment and storage facility to manage the liquids to be extracted for off-site disposal. The long-term effectiveness of the wells will be quantified. This well installation method should be considered in situations requiring the following: expedited installation; reduced Health and Safety concerns; reduced disposal costs; reduced potential for adverse environmental impact; and comparable installation costs. The choice of this method must include considerations of the subsurface geology and the nature of any manmade materials

  3. Planning and installing micro-hydro systems a guide for designers, installers and engineers

    CERN Document Server

    Elliott, Chris

    2014-01-01

    An essential addition to the Earthscan Planning & Installing series, Planning and Installing Micro-Hydro Systems provides vital diagrams, pictures and tables detailing the planning and installing of a micro-hydro system, including information on the maintenance and economics once an installation is running. The book covers subjects such as measuring head and flow, ecological impacts, scheme layouts, practical advice, calculations and turbine choice. Archimedes screws are also covered in detail, as well as the main conventional choices relevant to small sites.Micro-hydro refers to hydropower sy

  4. URGENCES NOUVELLE VERSION

    CERN Multimedia

    Medical Service

    2002-01-01

    The table of emergency numbers that appeared in Bulletin 10/2002 is out of date. The updated version provided by the Medical Service appears on the following page. Please disregard the previous version. URGENT NEED OF A DOCTOR GENEVAPATIENT NOT FIT TO BE MOVED: Call your family doctor Or SOS MEDECINS (24H/24H) 748 49 50 Or ASSOC. OF GENEVA DOCTORS (7H-23H) 322 20 20 PATIENT CAN BE MOVED: HOPITAL CANTONAL 24 Micheli du Crest 372 33 11 382 33 11 CHILDREN'S HOSPITAL 6 rue Willy Donzé 382 68 18 382 45 55 MATERNITY 24 Micheli du Crest 382 68 16 382 33 11 OPHTALMOLOGY 22 Alcide Jentzer 382 84 00 HOPITAL DE LA TOUR Meyrin 719 61 11 CENTRE MEDICAL DE MEYRIN Champs Fréchets 719 74 00 URGENCES : FIRE BRIGADE 118 FIRE BRIGADE CERN 767 44 44 BESOIN URGENT D'AMBULANCE (GENEVE ET VAUD) : 144 POLICE 117 ANTI-POISON CENTRE 24H/24H 01 251 51 510 EUROPEAN EMERGENCY CALL: 112 FRANCE PATIENT NOT FIT TO BE MOVED: call your family doctor PATIENT CAN BE MOVED: ST. JULIE...

  5. Vie-Nouvelle

    African Journals Online (AJOL)

    Chrystelle ATINKPAHOUN

    influent of wastewater treatment plant, greywater, etc. (Kafi et al. ... pollutant loadings related to suspended solids, bound metal ... treatment system for the domestic wastewater. (greywater and ...... thesis, Polytechnic Institute of Lorraine,. Nancy ...

  6. Site evaluation for nuclear installations. Safety requirements

    International Nuclear Information System (INIS)

    2003-01-01

    This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Siting, which was issued in 1988 as Safety Series No. 50-C-S (Rev. 1). It takes account of developments relating to site evaluations for nuclear installations since the Code on Siting was last revised. These developments include the issuing of the Safety Fundamentals publication on The Safety of Nuclear Installations, and the revision of various safety standards and other publications relating to safety. Requirements for site evaluation are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear installations. It is recognized that there are steady advances in technology and scientific knowledge, in nuclear safety and in what is considered adequate protection. Safety requirements change with these advances and this publication reflects the present consensus among States. This Safety Requirements publication was prepared under the IAEA programme on safety standards for nuclear installations. It establishes requirements and provides criteria for ensuring safety in site evaluation for nuclear installations. The Safety Guides on site evaluation listed in the references provide recommendations on how to meet the requirements established in this Safety Requirements publication. The objective of this publication is to establish the requirements for the elements of a site evaluation for a nuclear installation so as to characterize fully the site specific conditions pertinent to the safety of a nuclear installation. The purpose is to establish requirements for criteria, to be applied as appropriate to site and site-installation interaction in operational states and accident conditions, including those that could lead to emergency measures for: (a) Defining the extent of information on a proposed site to be presented by the applicant; (b) Evaluating a proposed site to ensure that the site

  7. Tradition et innovations esthétiques dans la nouvelle yéménite contemporaine Tradition and aesthetic innovations in contemporary Yemeni short stories

    Directory of Open Access Journals (Sweden)

    Géraldine Jenvrin

    2008-04-01

    Full Text Available Le nouveau recueil de Mu/hammad ‘Abd al-Wakîl Jâzim témoigne d’une transformation capitale dans la littérature yéménite contemporaine :  le passage d’une forme expérimentale en rupture avec les règles de la nouvelle traditionnelle et avec la réalité yéménite, à une autre forme plus accomplie dans laquelle les principes traditionnels de la nouvelle sont ici associés sans complexe aux formes renouvelées du genre.  La nouvelle intitulée Le maître des vautours, présente, dans une structure narrative traditionnelle, un conte fantastique moderne qui mêle réalisme, symbolisme et poésie, et dans lequel l’auteur traite à sa manière les thèmes littéraires contemporains de la dualité du rêve et de la réalité, du désenchantement et de l’enfermement perpétuel.  C’est notamment en s’inspirant de la langue, des pratiques orales, des croyances et de l’imaginaire populaire, que l’auteur, soucieux de donner un ancrage au texte dans la réalité yéménite, transfigure cette expérience existentielle moderne.The latest collection of short stories by Mu/hammad 'Abd al-Wakîl signals a major shift in contemporary Yemeni literature: from an experimental form, breaking away from both traditional short story conventions and Yemeni reality, to another, more accomplished form, unabashedly mixing traditional short story principles with renewed genre forms. The short story entitled The Vulture Master presents us, from within a traditional narrative structure, with a modern fantasy tale blending in realism, symbolism and poetry, and where the writer deals in his own way with such contemporary literary themes as disenchantment, perpetual captivity, and the duality of dream and reality. Drawing his inspiration from language itself, oral practices, beliefs and popular imagery, the writer, seeking to set his tale firmly in Yemeni reality, manages to transfigure this modern existential experiment.

  8. Department of the Army Installation Restoration Program

    International Nuclear Information System (INIS)

    Anderson, A.W.

    1988-01-01

    The Army's Installation Restoration Program (IRP) was established in 1975 in response to regulatory action at several installations where past disposal practices had caused contamination of streams and groundwater. The need to decontaminate excess Army-owned real estate also was considered in early IRP activities. A variety of site types have been discovered on Army installations. The major site types evaluated to date include: contaminated soil areas, landfills, lagoons, buildings, burning grounds, sumps, pits, storage tanks, sewage treatment plants, storage pads, industrial wastewater treatment plants, and salvage yards. Twenty Army installations have been proposed for or listed on the National Priorities List (NPL). The need for taking action at hazardous waste sites, however, is based on threats they pose to human health, welfare or the environment. Sites do not have to be on the SPL in order to be cleaned up through IRP activities. All of the sites that caused Army installations to be proposed for the NPL are being evaluated and cleaned up. In addition, all Army properties have been or will be assessed and where needed they will be addressed by the IRP

  9. Installing and Testing a Server Operating System

    Directory of Open Access Journals (Sweden)

    Lorentz JÄNTSCHI

    2003-08-01

    Full Text Available The paper is based on the experience of the author with the FreeBSD server operating system administration on three servers in use under academicdirect.ro domain.The paper describes a set of installation, preparation, and administration aspects of a FreeBSD server.First issue of the paper is the installation procedure of FreeBSD operating system on i386 computer architecture. Discussed problems are boot disks preparation and using, hard disk partitioning and operating system installation using a existent network topology and a internet connection.Second issue is the optimization procedure of operating system, server services installation, and configuration. Discussed problems are kernel and services configuration, system and services optimization.The third issue is about client-server applications. Using operating system utilities calls we present an original application, which allows displaying the system information in a friendly web interface. An original program designed for molecular structure analysis was adapted for systems performance comparisons and it serves for a discussion of Pentium, Pentium II and Pentium III processors computation speed.The last issue of the paper discusses the installation and configuration aspects of dial-in service on a UNIX-based operating system. The discussion includes serial ports, ppp and pppd services configuration, ppp and tun devices using.

  10. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system.Photo 01: Pictured with the newly installed magnet and transport system in the transfer line tunnel are (left to right) Volker Mertens, responsible for the LHC injection and transfer lines; personnel involved in tr...

  11. Installation of the LHC transfer lines begins

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The first of 700 magnets has been installed in one of the two transfer tunnels built to transfer the SPS beam into the LHC. The start of this first installation phase of the LHC transfer lines provides the opportunity to launch a new and highly original modular system for transporting and installing all kinds of magnets in very narrow tunnels. The system is based on very compact bogies, up to four of which can be coupled together to form a convoy. The wheels are fitted with individual motors enabling them to swivel through an angle of 90° and the convoy to move laterally. In this way the magnet is delivered directly to its installation point, but beneath the beamline. It is then raised into its final position in the beamline using air cushions, which form an integrated part of the transport system.Photos 01, 02: Pictured with the newly installed magnet and transport system in the transfer line tunnel are LHC project leader Lyn Evans (second left, white helmet); Volker Mertens, responsible for the LHC injecti...

  12. Design and installation of earth energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Loggia, S; Adragna, M; Coyle, S; Foley, C; Hawryn, S; Martin, A; McConnell, J [eds.

    2002-07-01

    This first edition of the Canadian Standards Association (CSA) Standard C448 Series, replaces CSA Standards CAN/CSA-C445-M92 entitled Design and Installation of Earth Energy Heat Pump Systems for Residential and Other Small Buildings, as well as C447-94 entitled Design and Installation of Earth Energy Heat Pump Systems for Commercial and Institutional Buildings. This standard document consists of three parts: (C448.1) Design and installation of earth energy systems for commercial and institutional buildings; (C448.2) Design and installation of earth energy systems for residential and small buildings; and, (C448.3) Design and installation of underground thermal energy storage systems for commercial and institutional buildings. In C448.1, the requirements applicable to any system falling within the scope of the C448 series were included. Alternative requirements for houses and small buildings were added in C448.2. It was noted that either standard may be implemented. The standards applicable to the intentional storage of energy in the earth for later use were presented in C448.3. This latter section includes a brief introduction on underground thermal energy storage (UTES). tabs.

  13. New combustion, environment regulations: the answers for natural gas; Nouvelles reglementations, combustion, environnement: les reponses pour le gaz naturel

    Energy Technology Data Exchange (ETDEWEB)

    Le Peltier-Marc, A. [Gaz de France (GDF), 75 - Paris (France)

    1997-12-31

    This paper reports on the point of view from Gaz de France (GdF) company concerning the potential consequences of the use of natural gas in combustion systems with respect to the new regulations about combustion and environment. Details concerning the measures relative to the limitation of pollutants in small combustion installations (2 - 20 MW) are given (chimney height, SO{sub x}, NO{sub x} and dusts content in exhaust gases). (J.S.)

  14. Childhood cancer and nuclear installations: a review

    International Nuclear Information System (INIS)

    Muirhead, C.R.

    1998-01-01

    Many epidemiological studies of childhood cancer around nuclear installations have been conducted in recent years. This article reviews results from Great Britain and elsewhere. Geographical studies have indicated raised risks of childhood leukaemia around some British nuclear installations. However, environmental assessments suggest that the findings are unlikely to be due to radioactive releases from the sites. Case-control studies have allowed more detailed investigation of putative risk factors than is possible from geographical studies. In particular, a recent national study in Britain does not support the hypothesis raised by an earlier study in West Cumbria that paternal radiation exposure prior to conception may increase the risk of leukaemia and non-Hodgkin's lymphoma in offspring. Other studies suggest that childhood leukaemia may have an infective basis, although there is still uncertainty about whether this would explain the findings around nuclear installations. The UK Childhood Cancer Study may provide more information on the causes of these diseases. (author)

  15. Installation Strategy for the LHC Main Dipoles

    CERN Multimedia

    Fartoukh, Stephane David

    2004-01-01

    All positions in the LHC machine are not equivalent in terms of beam requirements on the geometry and the field quality of the main dipoles. In the presence of slightly or strongly out-of tolerance magnets, a well-defined installation strategy will therefore contribute to preserve or even optimize the performance of the machine. Based on the present status of the production, we have anticipated a list of potential issues (geometry, transfer function, field direction and random b3) which, combined by order of priority, have been taken into account to define a simple but efficient installation algorithm for the LHC main dipoles. Its output is a prescription for installing the available dipoles in sequence while reducing to an absolute minimum the number of holes required by geometry or FQ issues.

  16. Radiation therapy sources, equipment and installations

    International Nuclear Information System (INIS)

    2011-03-01

    The safety code for Telegamma Therapy Equipment and Installations, (AERB/SC/MED-1) and safety code for Brachytherapy Sources, Equipment and Installations, (AERB/SC/MED-3) were issued by AERB in 1986 and 1988 respectively. These codes specified mandatory requirements for radiation therapy facilities, covering the entire spectrum of operations ranging from the setting up of a facility to its ultimate decommissioning, including procedures to be followed during emergency situations. The codes also stipulated requirements of personnel and their responsibilities. With the advent of new techniques and equipment such as 3D-conformal radiation therapy, intensity modulated radiation therapy, image guided radiation therapy, treatment planning system, stereotactic radiosurgery, stereotactic radiotherapy, portal imaging, integrated brachytherapy and endovascular brachytherapy during the last two decades, AERB desires that these codes be revised and merged into a single code titled Radiation Therapy Sources, Equipment, and Installations

  17. VERA 3.5 Installation Guide

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Roscoe A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Baird, Mark L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Berrill, Mark A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kulesza, Joel A. [Univ. of Michigan, Ann Arbor, MI (United States); Mervin, Brenden T. [Electric Power Research Inst. (EPRI), Charlotte, NC (United States)

    2016-08-16

    This guide describes the structure and setup of the standard VERA development environment (VERA Dev Env) and standard VERA Third Party Libraries (TPLs) that need to be in place before installing many of the VERA simulation components. It describes everything from the initial setup on a new machine to the final build, testing, and installation of VERA components. The goal of this document is to describe how to create the directories and contents outlined in Standard VERA Dev Env Directory Structure and then obtain the remaining VERA source and build, test, and install any of the necessary VERA components on a given system. This document describes the process both for a development version of VERA and for a released tarball of the VERA sources.

  18. VERA 3.5 Installation Guide

    International Nuclear Information System (INIS)

    Bartlett, Roscoe A.; Baird, Mark L.; Berrill, Mark A.; Kulesza, Joel A.; Mervin, Brenden T.

    2016-01-01

    This guide describes the structure and setup of the standard VERA development environment (VERA Dev Env) and standard VERA Third Party Libraries (TPLs) that need to be in place before installing many of the VERA simulation components. It describes everything from the initial setup on a new machine to the final build, testing, and installation of VERA components. The goal of this document is to describe how to create the directories and contents outlined in Standard VERA Dev Env Directory Structure and then obtain the remaining VERA source and build, test, and install any of the necessary VERA components on a given system. This document describes the process both for a development version of VERA and for a released tarball of the VERA sources.

  19. Study on installation of the submersible mixer

    International Nuclear Information System (INIS)

    Tian, F; Shi, W D; He, X H; Xu, Y H; Jiang, H

    2013-01-01

    Study on installation of the submersible mixer for sewage treatment has been limited. In this article, large-scale computational fluid dynamics software FLUENT6.3 was adopted. ICEM software was used to build an unstructured grid of sewage treatment pool. After that, the sewage treatment pool was numerically simulated by dynamic coordinate system technology and RNG k-ε turbulent model and PIOS algorithm. Agitation pools on four different installation location cases were simulated respectively, and the external characteristic of the submersible mixer and the velocity cloud of the axial section were respectively comparatively analyzed. The best stirring effect can be reached by the installation location of case C, which is near the bottom of the pool 600 mm and blade distance the bottom at least for 200 mm wide and wide edge and narrow edge distance by 4:3. The conclusion can guide the engineering practice

  20. Listed installations for environmental protection in hospitals

    International Nuclear Information System (INIS)

    Mullot, J.U.; Chaulet, J.F.; Thual, A.; Lafon, M.

    1999-01-01

    This work deals with the implications of different French rules and regulations concerning the environmental protection in hospitals. A special place is given to listed installations for environmental protection, because of their importance. A summary of important regulatory texts is presented concerning these installations, and also an inventory of installations or activities concerned, and the definition of the necessary procedures. Some ideas are also given about the much needed creation of an 'environmental network' inside hospitals, in order to cope with these concerns. Then, we briefly deal with more recent developments concerning the environmental protection, which will, no doubt, extend to hospitals, such as the French water law, air law, and procedures for the management of medical waste. Finally, the stakes of environmental decisions in hospitals and the chemist's place in these decisions are debated. (authors)

  1. Offshore wind transport and installation vessel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The initial objective of the project was to complete a feasibility study to determine the viability of an innovative transportation vessel to be deployed in the installation of offshore wind farms. This included the feasibility of providing a stable-working platform that can be used in harsh offshore environments. A study of current installation contractors and their installation equipment was used to provide a preliminary specification for the installation vessel. A typical barge was selected and a number of hydrodynamic analyses were carried out in order to establish it's on course and operational stability. The analysis proved the stability of the vessel during operation was critical and that in order to utilise the crane's full potential a stabilisation system must be employed. The main aim of the work to date was to establish whether it was feasible to use a stabilisation system on the installation vessel. The spud leg FEED study established that it was feasible to use spud legs to stabilise the vessel. In order to achieve the degree of stability required it is necessary to lift the vessel completely out of the water. This was not the original aim of the study but due to the external loads on the hull it was the only viable option. Lifting the vessel out of the water results in the legs and leg casings becoming very large. This has a number of consequences for the final design. Due to large loads on the legs spud cans must be used to avoid bottom penetration, the spud cans increase the draft of the vessel by 2m. The large loads require larger winches and more reeving to be used, this results in larger pumps and motors, all of which have to be housed. The stabilisation system has been proved to be feasible for a large installation vessel, the cost and physical size are however more excessive than first anticipated. (Author)

  2. PUREX exhaust ventilation system installation test report

    International Nuclear Information System (INIS)

    Blackaby, W.B.

    1997-01-01

    This Acceptance Test Report validates the testing performed, the exceptions logged and resolved and certifies this portion of the SAMCONS has met all design and test criteria to perform as an operational system. The proper installation of the PUREX exhaust ventilation system components and wiring was systematically evaluated by performance of this procedure. Proper operation of PUREX exhaust fan inlet, outlet, and vortex damper actuators and limit switches were verified, using special test equipment, to be correct and installed wiring connections were verified by operation of this equipment

  3. High voltage electricity installations a planning perspective

    CERN Document Server

    Jay, Stephen Andrew

    2006-01-01

    The presence of high voltage power lines has provoked widespread concern for many years. High Voltage Electricity Installations presents an in-depth study of policy surrounding the planning of high voltage installations, discussing the manner in which they are percieved by the public, and the associated environmental issues. An analysis of these concerns, along with the geographical, environmental and political influences that shape their expression, is presented. Investigates local planning policy in an area of the energy sector that is of highly topical environmental and public concern Cover

  4. Construction for Nuclear Installations. Specific Safety Guide

    International Nuclear Information System (INIS)

    2015-01-01

    This Safety Guide provides recommendations and guidance based on international good practices in the construction of nuclear installations, which will enable construction to proceed with high quality. It can be applied to support the development, implementation and assessment of construction methods and procedures and the identification of good practices for ensuring the quality of the construction to meet the design intent and ensure safety. It will be a useful tool for regulatory bodies, licensees and new entrant countries for nuclear power plants and other nuclear installations

  5. Questions for the nuclear installations inspectorate

    International Nuclear Information System (INIS)

    Conroy, C.; Flood, M.; MacRory, R.; Patterson, W.C.

    1976-01-01

    The responsibilities of the Nuclear Installations Inspectorate are considered, and the responsibilities of other bodies for (a) reprocessing and enrichment, and (b) security. Questions for the Nuclear Installations Inspectorate are then set out under the following heads: general (on such topics as vandalism, sabotage, threats, security, reactor incidents); magnox reactors; corrosion; advanced gas-cooled reactor; steam generating heavy water reactor; fast breeder reactor; reproces-sing and waste. Most of the questions are concerned with technical problems that have been reported or might possibly arise during construction or operation, affecting the safety of the reactor or process. (U.K.)

  6. Managing for safety at nuclear installations

    International Nuclear Information System (INIS)

    1996-01-01

    This publication, by the Health and Safety Executive's (HSE's) Nuclear Safety Division (NSD), provides a statement of the criteria the Nuclear Installations Inspectorate (NII) uses to judge the adequacy of any proposed or existing system for managing a nuclear installation in so far as it affects safety. These criteria have been developed from the basic HSE model, described in the publication Successful health and safety management that applies to industry generally, in order to meet the additional needs for managing nuclear safety. In addition, the publication identifies earlier studies upon which this work was based together with the key management activities and outputs. (Author)

  7. Measurements of image characteristics of DSA installations

    International Nuclear Information System (INIS)

    Busch, H.P.; Strauss, L.G.; Freimarck, R.D.

    1984-01-01

    Measurements for quantifying the image characteristics were carried out on three DSA installations (DVI 1 - Philips, Angiotron - Siemens and DF 3000 - General Eletric). Contrast resolution was measured with a vessel phantom (General Electric) and spatial resolution with a lead grid. A further parameter was the dose entering the image intensifier. The Angiotron was used with an intensifier with 53 cm. diameter and the DF 3000 with temporal subtraction of the video images and the subtraction of dual energy images (hybrid technique). These measurements can be carried out quickly and easily and are a step towards standardisation of measurements of image characteristics of DSA installations. (orig.) [de

  8. Tolley's industrial and commercial gas installation practice

    CERN Document Server

    Hazlehurst, John

    2010-01-01

    This is the third of three essential reference volumes for those concerned with the installation and servicing of domestic and industrial gas equipment. This volume explains the basic principles underlying the practical and theoretical aspects of installing and servicing gas appliances and associated equipment, from the basics of combustion, to burners, pressure and flow, transfer of heat, controls, as well as materials and processes, electrical aspects, and metering and measuring devices. Covering both Natural Gas and Liquefied Petroleum Gas, the many illustrations and worked examples include

  9. Design, fabrication and installation of irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Bong Shick; Kim, Y. S.; Lee, C. Y. and others

    1999-03-01

    The principal contents of this project are to design, fabricate and install the steady-state fuel test loop in HANARO for nuclear technology development. Procurement and fabrication of main equipment, licensing and technical review for fuel test loop have been performed during 2 years(1997, 1998) for this project. Following contents are described in the report. - Procurement and fabrication of the equipment, piping for OPS - IPS manufacture - License - Technical review and evaluation of the FTL facility. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and review ofHANARO interface have been performed respectively. (author)

  10. Statement of nuclear incidents at nuclear installations

    International Nuclear Information System (INIS)

    2002-07-01

    A statement of nuclear incidents at nuclear installations in Britain during the first quarter of 2002 is published today by the Health and Safety Executive. It covers the period 1 January to 31 March 2002. There are two installations mentioned in the statement: Dungeness B and Heysham 1. The statement is published under arrangements that came into effect from the first quarter of 1993, derived from the Health and Safety Commission's powers under section 11 of the Health and Safety at Work, etc. Act 1974

  11. Natural gas fuelling stations installation code

    Energy Technology Data Exchange (ETDEWEB)

    Barrigar, C; Burford, G; Adragna, M; Hawryn, S

    2004-07-01

    This Canadian Standard applies to natural gas fuelling stations that can be used for fleet and public dispensing operations. This document is divided into 11 sections that address the scope of the Standard; definitions and reference publications; general requirements; compressors; storage; dispensing; flow control devices; storage vessel dispatch and receiving; design, installation and testing of piping, tubing and fittings; and installation of vehicle refuelling appliances (VRAs) connected to storage piping. The most recent revision to the Standard includes requirements for indoor fuelling of natural gas vehicles. This Standard, like all Canadian Standards, was subject to periodic review and was most recently reaffirmed in 2004. tabs., figs.

  12. Les nouvelles perspectives d'analyse spatiale des nuisances sonores. Le projet SIGAUR (Système d'Information Géographique et Acoustique URbaine

    Directory of Open Access Journals (Sweden)

    Erwan Quesseveur

    1999-06-01

    Full Text Available Ce rapport présente un projet de recherche sur l’intégration d’une couche d’information de nuisances acoustiques dans un système d’information géographique.Après un développement sur l’état de la pollution et des moyens aujourd’hui en vigueur pour la combattre, on va montrer les nouvelles perspectives offertes pour l’analyse spatiale du bruit. En confrontant cette nuisance aux enjeux du territoire, elle peut devenir un véritable critère de décision en aménagement du territoire.Ce projet résulte d’une collaboration entre le Centre Scientifique et Technique du Bâtiment C.S.T.B. et l’équipe " S.I.G. " de l'Institut de Géographie Alpine (IGA

  13. L'auteure mise en scène et mise à nu. Sur les fausses confessions de La nouvelle pornographie

    Directory of Open Access Journals (Sweden)

    Joëlle Papillon

    2010-11-01

    Full Text Available L'inclusion dans La nouvelle pornographie (2000 du nom propre de l'auteure est perçue comme une implication qui la met en danger. La métalepse est utilisée pour inscrire le roman dans la mouvance des confessions sexuelles et se jouer de leurs codes. Comme le discours publicitaire, Marie Nimier utilise la rhétorique pornographique afin de « vendre » un contenu domestique : la pornographie de surface dissimule un récit qui réinscrit l'amour comme moteur du désir féminin. Nimier joue de la métalepse pour déjouer les scènes pornographiques et séduire le lecteur par l'intelligence de ses manipulations plutôt que par ses dévoilements.

  14. Nouvelle méthodologie de synthèse de molécules à potentiel diurétique

    OpenAIRE

    Ouellet, Simon

    2007-01-01

    [Synthèse combinatoire ]. Le présent mémoire propose l'élaboration d'une nouvelle méthodologie de synthèse de molécules ayant un potentiel diurétique, et ciblant plus particulièrement les cotransporteurs cations-chlorures, responsables du mouvement couplé des ions sodium et/ou potassium avec celui du chlorure dans plusieurs types de cellules dont celles des néphrons. La première partie est consacrée à une description de la chimie combinatoire, aux travaux antérieurs effectués dans notre la...

  15. Développement des compétences interprofessionnelles de la nouvelle infirmière diplômée: revue de littérature

    OpenAIRE

    Meyer, Agnès,; Hauser, Christine,; Bulliard Verville, Danielle

    2017-01-01

    La pénurie infirmière qui touche actuellement la Suisse sera comblée en grande partie par les nouvelles diplômées infirmières1, d’ici quelques années. Cependant, un taux important de turnover dans les équipes peut mettre en péril leur encadrement. Leur processus d’insertion étant particulièrement éprouvant dans les premiers mois de pratique, il en résulte que nombre d’entre elles quittent précocement la profession. Comme stratégie pour pallier ce problème, la littérature montre les effets pos...

  16. The role of installers for thermo-technical installations when buying gas boilers

    Directory of Open Access Journals (Sweden)

    Jovičić Dragoljub

    2013-01-01

    Full Text Available This study presents the research of role installers for thermo-technical installations when buying gas boilers in the Serbian market. Considering the fact that installers are significantly different, they are grouped by specific, relevant characteristics. The research is focused on the evaluation of marketing mix instruments by nine identified segments of installers. Moreover, research has been explored deeper through conclusion installers about the most important and most credible sources of information on gas boilers. During the research were used secondary and primary data sources. Besides the research at the table, field research has been also done by unstructured personal communication. All collected data were analyzed in details and both hypothesis were tested, where one of them is partially confirmed, and another one fully confirm. Given results can be useful for marketers and their anticipation of demand. Also these results can be used for creating optimal marketing strategy in the Serbian market of gas boilers.

  17. Les nouvelles formes de la communication autour des projets urbains : modalités, impacts, enjeux pour un débat participatif

    Directory of Open Access Journals (Sweden)

    Hélène Bailleul

    2008-09-01

    Full Text Available Dans cet article, nous observons les évolutions que l’usage des nouvelles technologies implique dans la communication autour des projets urbains. Notre analyse des nouvelles modalités qu’Internet a pu importer dans la participation des habitants aux projets urbains (partie 1 nous pousse à observer, plus spécifiquement, les modifications qui ont trait, dans ce contexte, à la nature et au statut de l’information sur l’espace. La démocratisation des techniques de représentation de l’espace par ordinateur (3D, simulation entraîne le recours quasi systématique à des images virtuelles du projet, d’une grande qualité (partie 2, mais dont on ne connaît que très peu les impacts sur la perception et la réception que les habitants font du projet (partie 3.In this article, we observe the evolutions involved by the use of new technology in the communication around urban projects. Our analysis of the new modalities, Internet was able to import in the participation of inhabitants in urban projects (chapter 1 urges us to examine, more specifically, the modifications concerning the nature and the status of the information about space. The democratization of computer-based spatial representation’s tools (3D, simulation entails more and more systematic recourse to virtual images of the project, with high definition (chapter 2. But, nowadays, we still know little about their impacts on the perception and the reception, the inhabitants make of the project (chapter 3.

  18. 30 CFR 817.180 - Utility installations.

    Science.gov (United States)

    2010-07-01

    ... PERMANENT PROGRAM PERFORMANCE STANDARDS PERMANENT PROGRAM PERFORMANCE STANDARDS-UNDERGROUND MINING ACTIVITIES § 817.180 Utility installations. All underground mining activities shall be conducted in a manner...; oil, gas, and coal-slurry pipelines, railroads; electric and telephone lines; and water and sewage...

  19. Designing Software-Based Interactive Installations

    DEFF Research Database (Denmark)

    Andreasen, Troels; Juul, Niels Christian; Rosendahl, Mads

    2014-01-01

    of the installation using tools like sketching or storyboarding. The design involves a clarification of available and appropriate building blocks, as well as the linking of these blocks to provide an architectural framework comprising the intended external behavior. The construction phase takes a component...

  20. Solar Energy Installers Curriculum Guides. Final Report.

    Science.gov (United States)

    Walker, Gene C.

    A project was conducted to develop solar energy installers curriculum guides for use in high school vocational centers and community colleges. Project activities included researching job competencies for the heating, ventilation, and air conditioning industry and determining through interviews and manufacturers' literature what additional…

  1. Geodetic alignment of laser power installations

    International Nuclear Information System (INIS)

    Shtorm, V.V.; Gostev, A.M.; Drobikov, A.V.

    1989-01-01

    Main problems occuring in applied geodesy under initial alignment of laser power installation optical channel are considered. Attention is paid to alignment of lens beamguide telescopic pairs and alignment quality control. Methods and means of geodetic measurements under alignment are indicated. Conclusions are made about the degree of working through certain aspects of the problem

  2. Installation of the ALICE dipole magnet

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    The large dipole magnet is installed on the ALICE detector at CERN. This magnet, which is cooled by demineralised water, will bend the path of muons that leave the huge rectangular solenoid (in the background). These muons are heavy electrons that interact less with matter, allowing them to traverse the main section of the detector.

  3. Installation of foundation fieldbus to KUR

    International Nuclear Information System (INIS)

    Ishihara, Shinji; Fujita, Yoshiaki

    1999-11-01

    The instrumentation and control system for the research reactor in Research Reactor Institute, Kyoto University has been used for the safe and steady operation since the initial critical attainment in 1964. It has been modified and added many devices in the chance of increasing the reactor power from 1 MW to 5 MW, installing new experimental facilities or fitting to modified nuclear regulations. In order to avoid the unscheduled shutdown of the research reactor by cause the failure of the devices, most of instrumentation system was renewed in 1999. Operating the research reactor more safely and reliably, Supervisory Control Automation and Data Acquisition System which employed personal computers with the Windows NT operating system was added to the conventional instrumentation system, and the fieldbus system called Foundation Fieldbus was installed. Compared with conventional instrumentation system, each fieldbus system has some advantages. Many kinds of fieldbus systems have been developed and sold on the markets in some countries. Foundation Fieldbus standardizing international, which was able to use the devices made by multi-vendor was tentatively installed to study particular techniques about Foundation Fieldbus. The primary coolant flow rate, the temperature difference between the reactor tank inlet and outlet temperatures, the calorimetric power and the reactor power in nuclear instrumentation are monitored on human-machine interface devices on the fieldbus. The programmable logic controller is employed to control the information system for the reactor. This paper introduces Foundation Fieldbus installed. (author)

  4. Door Hardware and Installations; Carpentry: 901894.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The curriculum guide outlines a course designed to provide instruction in the selection, preparation, and installation of hardware for door assemblies. The course is divided into five blocks of instruction (introduction to doors and hardware, door hardware, exterior doors and jambs, interior doors and jambs, and a quinmester post-test) totaling…

  5. First detector installed inside the ALICE solenoid...

    CERN Multimedia

    2006-01-01

    ALICE's emblematic red magnet welcomed its first detector on 23 September, when the array of seven Cherenkov detectors, named HMPID, was successfully installed. ALICE team members standing in front of the completed HMPID detector.The red magnet, viewed from its front opening. The HMPID unit, seen from the back (top right corner of photo) is placed on a frame and lifted onto a platform during the installation. After the installation of the ACORDE scintillator array and the muon trigger and tracking chambers, the ALICE collaboration fitted the first detector inside the solenoid. The HMPID, for High Momentum Particle Identification, was installed at the 2 o'clock position in the central and most external region of the space frame, just below the solenoid yoke. It will be used to extend the hadron identification capability of the ALICE experiment up to 5 GeV/c, thus complementing the reach of the other particle identification systems (ITS, TPC and TOF). The HMPID is a Ring Imaging Cherenkov (RICH) detector in a...

  6. Installation of the LHC transfer lines begins

    CERN Multimedia

    2003-01-01

    On 19 February, the very first magnet was installed in one of the two tunnels that will house the transfer lines leading to the LHC. This magnet, recycled from a previous facility, was transported and positioned using a novel system designed for conveying large objects through narrow tunnels.

  7. Participatory ergonomics applied in installation work

    NARCIS (Netherlands)

    Jong, A.M. de; Vink, P.

    2002-01-01

    This paper evaluates a step-by-step participatory approach to better work, applied in reducing the musculoskeletal workload in installation work. To arrive at a reduction in workload, a steering group led the project through the following steps: Introduction: defining the goal and informing all 7000

  8. Piezometer installation and monitoring procedure: Revision 1

    International Nuclear Information System (INIS)

    1987-04-01

    The Deaf Smith County (Texas) site has been selected by the US Department of Energy as one of three candidate sites for characterization to determine its suitability as a geologic repository for high-level nuclear waste. The installation and monitoring of piezometers has been identified as one of the tasks required during the development of an underground Exploratory Shaft Facility to satisfy specific information needs through a program of in situ testing, instrumentation and monitoring. The scope of piezometer installation and monitoring encompasses the installation of fluid pressure measuring equipment and the subsequent collection, presentation and interpretation of piezometric data from strata surrounding the Exploratory Shaft Facility (ESF) prior to, during and following construction of the ESF, and as part of geohydrologic testing within the ESF. This procedure describes the required instrumentation, equipment, and sequence of activities for piezometer installation in the ESF. The procedure also includes details on the data recording and presentation requirements, personnel responsibilities, test management and quality assurance. 16 refs., 12 figs., 2 tabs

  9. Installations solaires photovoltaïques

    CERN Document Server

    2014-01-01

    Cet ouvrage présente les règles de conception et de mise en œuvre des installations photovoltaïques raccordées au réseau public de distribution à basse tension. Il s’applique aux bâtiments neufs et existants et concerne non seulement les petites installations résidentielles, d’une puissance de l’ordre de quelques kWc, mais aussi celles des bâtiments collectifs, tertiaires ou agricoles. Il traite successivement : - des fondamentaux de l'énergie solaire photovoltaïque (gisement solaire, principe de la conversion, composants d'une installation...) ; - du dimensionnement de l'installation (choix des matériels, règles de conception, estimation de l'énergie récupérable...) ; - de sa mise en oeuvre (travail en hauteur, habilitation électrique, mise en service, maintenance...) ; - des démarches administratives nécessaires (aides financières, accès au réseau de distribution, vente de l'électricité produite...).

  10. Radionuclides gauges. Gauges designed for permanent installation

    International Nuclear Information System (INIS)

    1987-06-01

    This present norm determines, for radionuclides gauges designed for permanent installation, the characteristics that these gauges should satisfied in their construction and performance to respect the prescriptions. It indicates the testing methods which permit to verify the agreement, gives a classification of gauges and specifies the indications to put on the emitter block [fr

  11. Computer systems for nuclear installation data control

    International Nuclear Information System (INIS)

    1987-09-01

    The computer programs developed by Divisao de Instalacoes Nucleares (DIN) from Brazilian CNEN for data control on nuclear installations in Brazil are presented. The following computer programs are described: control of registered companies, control of industrial sources, irradiators and monitors; control of liable person; control of industry irregularities; for elaborating credence tests; for shielding analysis; control of waste refuge [pt

  12. Installation package - SIMS prototype system 1A

    Science.gov (United States)

    1976-01-01

    This report consists of details for the installation, operation and maintenance of a prototype heating and hot water system, designed for residential or light commercial applications. This system consists of the following subsystems: air type collectors, pebble bed thermal storage, air handling unit, air to water heat exchanger, hot water preheat tank, auxiliary energy, ducting system.

  13. Licensing system for primary category radioactive installations

    International Nuclear Information System (INIS)

    Ramirez Riquelme, Angelica Beatriz

    1997-01-01

    The development of a licensing system for primary category radioactive installations is described, which aims to satisfy the needs of the Chilean Nuclear Energy Commission's Department of Nuclear and Radiological Safety, particularly the sections for Licensing Outside Radioactive Installations and Safety Control. This system involves the identification, control and inspection of the installations, their personnel and connected activities, for the purpose of protecting the population's health and the environment. Following the basic cycle methodology, a systems analysis and engineering stage was prepared, establishing the functions of the system's elements and defining the requirements, based on interviews with the users. This stage was followed by the design stage, focusing on the data structure, the software architecture and the procedural detail. The codification stage followed, which translated the design into legible machine-readable format. In the testing stage, the entries that were defined were proven to produce the expected data. Finally and operational and maintenance stage was developed, when the system was installed and put to use. All the above generated a useful system for the Licensing section of the Department of Nuclear and Radiological Safety, since it provides faster and easier access to information. A project is described that introduces new development tools in the Computer department following standards established by the C.CH.E.N. (author)

  14. Installation in Outdoor Advertising Designs: Engagement with ...

    African Journals Online (AJOL)

    The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

  15. Decommissioning and abandonment of offshore installations

    International Nuclear Information System (INIS)

    Side, J.C.

    1992-01-01

    To the onlooker surprising little thought was given at the project planning stage to the fate of offshore facilities once their production lifetimes had come to an end. Throughout the 1970s at least, international law required the complete removal of all structures and installations one disused or abandoned. Fishermen's organisations were led to believe that such installations would be entirely removed yet many of the designs of these show that removal was not much in the minds of the engineers or project management during the design stages. Changes in the text of the United Nations' Convention on the Law of the Sea and (by their widespread legal adoption) in customary international law may now permit partial removal of installations subject to important safeguards for navigation, the environment and other users of the sea. Of the North Sea states at least one has adopted policies that will minimise the cost associated with offshore decommissioning and abandonment and both the UK and Norway are adopting legislation which will provide for a case by case approach to the decommissioning and abandonment of offshore facilities and allow partial removal options. There has thus been a recent and significant change in approach to the abandonment of offshore oil and gas installations. This chapter reviews the development of abandonment laws and policies, outlines the available removal options, and provides a consideration of the environmental and fishery implications of these for the North Sea. (Author)

  16. The Swiss nuclear installations. Annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Surveillance of the Swiss nuclear installations with regard to nuclear safety, including radiation protection, is among the tasks of the Swiss Federal Nuclear Safety Inspectorate (HSK). Five nuclear power plants are operational in Switzerland: the three units Beznau I and II and Muehleberg with electrical capacities in the range of 300 to 400 MWe, and the two units Goesgen and Leibstadt with capacities between 900 and 1200 MWe. These are light water reactors; at Beznau and Goesgen of the PWR type, and at Muehleberg and Leibstadt of the BWR type. Research reactors of thermal capacities below 10 MWth are operational at the Paul Scherrer Institute (PSI), at the Swiss Federal Institute of Technology Lausanne and at the University of Basel. Further subject to HSK`s supervision are all activities at PSI involving nuclear fuel or ionizing radiation, the shut-down experimental reactor of Lucens, the exploration, in Switzerland, of final disposal facilities for radwaste and the interim radwaste storage facilities. The report first deals with the nuclear power and covers, in individual sections, the aspects of installation safety, radiation protection as well as personnel and organization, and the resulting overall impression from the point of view of HSK. In chapter 5, the corresponding information is given for research installations. Chapter 6, on radwaste disposal, is dedicated to the treatment of waste, waste from reprocessing, interim storage and exploration by NAGRA. In chapter 7, the status of emergency planning in the nuclear power plants` proximity is reported. Certificates issued for the transport of radioactive materials are dealt with in chapter 8. Finally chapter 9 goes into general questions relating to the safety of nuclear installations. All in all, the safety of operation of the Swiss nuclear installations, in the period of 1994, is judged as good by HSK. (author) 11 figs., 13 tabs.

  17. The Swiss nuclear installations. Annual report 1993

    International Nuclear Information System (INIS)

    1994-08-01

    Surveillance of the Swiss nuclear installations with regard to nuclear safety, including radiation protection, is among the tasks of the Swiss Federal Nuclear Safety Inspectorate (HSK). Five nuclear power plants are operational in Switzerland: the three units Beznau I and II and Muehleberg with electrical capacities in the range of 300 to 400 MWe, and the two units Goesgen and Leibstadt with capacities between 900 and 1200 MWe. These are light water reactors; at Beznau and Goesgen of the PWR type, and at Muehleberg and Leibstadt of the BWR type. Research reactors of thermal capacities below 10 MWth are operational at the Paul Scherrer Institute (PSI), at the Swiss Federal Institute of Technology Lausanne and at the University of Basel. Further subject to HSK's supervision are all activities at PSI involving nuclear fuel or ionizing radiation, the shut-down experimental reactor of Lucens, the exploration of final disposal facilities for radwaste and the interim radwaste storage facilities in Switzerland. The report first deals with the nuclear power and covers, in individual sections, the aspects of installation safety, radiation protection as well as personnel and organization, and the resulting overall impression from the point of view of HSK. In chapter 5, the corresponding information is given for research installations. Chapter 6, on radwaste disposal, is dedicated to the treatment of waste, waste from reprocessing, interim storage and exploration by NAGRA. In chapter 7, the status of emergency planning in the nuclear power plants' proximity is reported. Certificates issued for the transport of radioactive materials are dealt with in chapter 8. Finally chapter 9 goes into general questions relating to the safety of nuclear installations. All in all, the safety of operation of the Swiss nuclear installations, in the period of 1993, is judged as good by HSK. (author) 10 figs., 11 tabs

  18. 46 CFR 111.60-5 - Cable installation.

    Science.gov (United States)

    2010-10-01

    ... REQUIREMENTS Wiring Materials and Methods § 111.60-5 Cable installation. (a) Each cable installation must meet... 46 Shipping 4 2010-10-01 2010-10-01 false Cable installation. 111.60-5 Section 111.60-5 Shipping... incorporated by reference; see 46 CFR 110.10-1), including clause 8. (b) Each cable installation made in...

  19. 46 CFR 58.10-10 - Diesel engine installations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Diesel engine installations. 58.10-10 Section 58.10-10... MACHINERY AND RELATED SYSTEMS Internal Combustion Engine Installations § 58.10-10 Diesel engine installations. (a) The requirements of § 58.10-5 (a), (c), and (d) shall apply to diesel engine installations...

  20. 46 CFR 58.10-5 - Gasoline engine installations.

    Science.gov (United States)

    2010-10-01

    ... MACHINERY AND RELATED SYSTEMS Internal Combustion Engine Installations § 58.10-5 Gasoline engine installations. (a) Engine design. All installations shall be of marine type engines suitable for the intended... of such protection. (d) Exhaust pipe. (1) Exhaust pipe installations must conform to the requirements...

  1. Update of the database of photovoltaic installations in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, D.; Bruhns, H.

    1999-07-01

    The article describes an updated database of photovoltaic (PV) installations in the UK. The database contains more than 300 records representing over 40,000 photovoltaic installations with more than 100 buildings that use photovoltaic arrays. Figures show: (i) a chart of cumulative PV applications to date; (ii) a chart of cumulative installations in the database; (iii) the growth of Building Integrated PV installed to date; (iv) the cumulative growth of peak power of PV for buildings installed every year since 1985; (v) the distribution by application of all PV installations in the database and (vi) the various applications of PV installations.

  2. Professional installation of overvoltage protection devices. The most common installation errors; Fachgerechte Installation von Ueberspannungsschutzgeraeten. Die haeufigsten Installationsfehler

    Energy Technology Data Exchange (ETDEWEB)

    Gmelch, L. [Dehn und Soehne GmbH und Co. KG, Neumarkt (Germany)

    2007-07-01

    Increasingly sensitive electronic equipment and high demands on plant and system availability necesstate effective protection against lightning and overvoltage. Apart from the measures that must be taken already in the projecting phase in order to minimize the risk of interferences, disturbances and destruction of plants and systems, there are also some basic principles that must be observed when installing overvoltage protection equipment. If these are neglected, the protective function of overvoltage protection systems may be seriously impaired. (orig.)

  3. Gestion par projets et risques pour la santé psychologique au travail dans la nouvelle économie

    Directory of Open Access Journals (Sweden)

    Marie-Josée Legault

    2006-05-01

    Full Text Available Y a-t-il des problèmes de santé mentale propres au travail dans la nouvelle économie ? Quoiqu’on puisse constater que le modèle de demande psychologique - autonomie décisionnelle de Karasek et Theorell- trouve aussi son application dans les milieux de travail qui empruntent cette forme, on observe, en fait, des formes particulières de ces facteurs dans la forme d’organisation du travail propre à la gestion par projets. Assimilables à « l’hypersollicitation par le client » comme il a été repéré par Christophe Dejours, ces formes ont été observées lors d’une enquête menée récemment sur la conciliation entre la vie privée et la vie professionnelle dans sept organisations montréalaises. La recherche qualitative a recueilli en tout le discours de 88 répondants distribués également selon le sexe et exerçant des fonctions liées au génie informatique. Ces observations permettent d’envisager une nuance au modèle théorique de la santé mentale ci-haut mentionné, visant à tenir compte des effets délétères d’une très grande latitude décisionnelle assortie de très grandes responsabilités chez des travailleurs hautement qualifiés.Are there distinct mental health problems among workers in the new economy? Although we may observe that the psychological demand - decision latitude model of Karakek and Theorell is appropriate and also finds its application in this type of workplace, we also notice some particular forms that these factors take in the management-by-project work organization model. Akin to the so-called "client’s hyper-demanding activity" as identified by Christophe Dejours, these forms were observed during a recent field study about balancing work and family in seven Montreal organizations. The qualitative study collected data from 88 individual interviews of information technology engineers, evenly distributed by gender. These observations allow a nuance of the above-mentioned theoretical

  4. Installation Capacity Assessment of Damaged Deepwater Pipelines

    Directory of Open Access Journals (Sweden)

    Ramasamy R.

    2014-07-01

    Full Text Available The worldwide exploration and development of subsea and deepwater reservoirs has laid down some new and old engineering challenges to the offshore pipeline industry. This requires large D/t pipelines to be installed at water depths in the vicinity of up to 2700m. The deepwater collapse and buckle propagation event is almost unavoidable as the pipe wall thickness cannot be always determined from the codes and standards due to the limit state criteria. These codes also do not consider any fabrication imperfections and sustained damages emanating from transportation and handling. The objective of this paper is to present the Finite Element Analysis (FEA of dented pipes with D/t ratio more than 45, which is outside the applicability of current design codes, and to investigate the effects on installation capacity of these various damage sizes in terms of collapse and buckle propagation.

  5. Integrated installation for offshore wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Way, J.; Bowerman, H.

    2003-07-01

    A project to investigate the feasibility of integrating the offshore installation of foundation, turbine and tower for offshore wind turbines into one operation is described. Three separate objectives are listed. They are: (1) Telescopic tower study - reversible process incorporating lift and lock mechanisms; (2) Transportation study - technical and economic feasibility of transporting and installing a wind turbine unit via a standard barge with minimal conversion and (3) Self-burial system study - to demonstrate the feasibility of self burial of a slab foundation via controlled jetting beneath the slab. The background to the study and the proposed concepts are discussed. The work carried out to date and the costs are reported together with the findings. Recommendations for future work are listed. The work was carried out by Corus UK Ltd and is managed by Future Energy Solutions for the DTI.

  6. Installation of an innovative remedial technology

    International Nuclear Information System (INIS)

    Hines, B.

    1995-01-01

    The major goal of the Lasagna trademark project was to design, construct, install, and operate an in situ remediation system in low-permeability soil. A new technology--the Lasagna process--uses electro-osmosis to move contaminated groundwater through treatment zones. The treatment zones are installed in contaminated soils, thereby forming an integrated in situ remedial process. Electro-osmosis, well known for its effectiveness and extremely low power consumption, uses a direct current to cause Groundwater to travel through low-permeability soil. When a bench-scale version of the technology was 98 percent effective in removing contamination, an actual field test was the next step. The site chosen for this first field effort was the DOE-owned Paducah Gaseous Diffusion Plant located in Paducah, Kentucky. The target contaminant for this project was trichloroethylene (TCE) because it is found at many sites across the country and is present at approximately 60 percent of DOE's sites

  7. Software safety analysis application in installation phase

    International Nuclear Information System (INIS)

    Huang, H. W.; Yih, S.; Wang, L. H.; Liao, B. C.; Lin, J. M.; Kao, T. M.

    2010-01-01

    This work performed a software safety analysis (SSA) in the installation phase of the Lungmen nuclear power plant (LMNPP) in Taiwan, under the cooperation of INER and TPC. The US Nuclear Regulatory Commission (USNRC) requests licensee to perform software safety analysis (SSA) and software verification and validation (SV and V) in each phase of software development life cycle with Branch Technical Position (BTP) 7-14. In this work, 37 safety grade digital instrumentation and control (I and C) systems were analyzed by Failure Mode and Effects Analysis (FMEA), which is suggested by IEEE Standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The FMEA showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (authors)

  8. Software safety analysis practice in installation phase

    Energy Technology Data Exchange (ETDEWEB)

    Huang, H. W.; Chen, M. H.; Shyu, S. S., E-mail: hwhwang@iner.gov.t [Institute of Nuclear Energy Research, No. 1000 Wenhua Road, Chiaan Village, Longtan Township, 32546 Taoyuan County, Taiwan (China)

    2010-10-15

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  9. Software safety analysis practice in installation phase

    International Nuclear Information System (INIS)

    Huang, H. W.; Chen, M. H.; Shyu, S. S.

    2010-10-01

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  10. Installation and validation of MCNP-4A

    International Nuclear Information System (INIS)

    Marks, N.A.

    1997-01-01

    MCNP-4A is a multi-purpose Monte Carlo program suitable for the modelling of neutron, photon, and electron transport problems. It is a particularly useful technique when studying systems containing irregular shapes. MCNP has been developed over the last 25 years by Los Alamos, and is distributed internationally via RSIC at Oak Ridge. This document describes the installation of MCNP-4A (henceforth referred to as MCNP) on the Silicon Graphics workstation (bluey.ansto.gov.au). A limited number of benchmarks pertaining to fast and thermal systems were performed to check the installation and validate the code. The results are compared to deterministic calculations performed using the AUS neutronics code system developed at ANSTO. (author)

  11. Drones and safety of nuclear installations

    International Nuclear Information System (INIS)

    Tourneur, Jean-Claude

    2015-01-01

    Recent flyovers of French nuclear power plants by drones or UAVs (the owners of these drones could not be identified) has made the safety of these nuclear installations a matter of concern. These events also raised the question of balance between secret and information about these installations. The French Parliamentary Office for the Assessment of Scientific and Technological Choices (OPECST) organised two sets of hearings, a confidential one with people in charge of information related to national defence and security, and a public one opened to all stakeholders. This article briefly reports and discusses the results of these hearings. It appeared that these flyovers are not really a threat, are more a communication action than anything else. Suggestions have been made for the development of researches in the field of drone detection, and also for evolutions of French legislation on drones

  12. Idaho National Engineering Laboratory installation roadmap document

    International Nuclear Information System (INIS)

    1993-01-01

    The roadmapping process was initiated by the US Department of Energy's office of Environmental Restoration and Waste Management (EM) to improve its Five-Year Plan and budget allocation process. Roadmap documents will provide the technical baseline for this planning process and help EM develop more effective strategies and program plans for achieving its long-term goals. This document is a composite of roadmap assumptions and issues developed for the Idaho National Engineering Laboratory (INEL) by US Department of Energy Idaho Field Office and subcontractor personnel. The installation roadmap discusses activities, issues, and installation commitments that affect waste management and environmental restoration activities at the INEL. The High-Level Waste, Land Disposal Restriction, and Environmental Restoration Roadmaps are also included

  13. Installation for analytic chemistry under irradiation

    International Nuclear Information System (INIS)

    Fradin, J.; Azoeuf, P.; Guillon, A.

    1966-01-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [fr

  14. Meteorological characteristics of nuclear installations sites

    International Nuclear Information System (INIS)

    Doumenc, A.

    1988-01-01

    The atmosphere is the most propitious medium to a rapid transport and diffusion of a pollutant. So, it is important to know its local characteristics which is decisive for every evaluation of radioactive release consequences using transfer models. It is also the siege of intense sudden hazardous phenomena, as tornados and typhoons, that should be taken into account in the installation conception. 1 tab., 6 refs. (F.M.)

  15. Torsion instability of Dynamic Cables during Installation

    OpenAIRE

    Opgård, Marie Finstad

    2017-01-01

    The oil and gas industry today is a heavily regulated segment, and current standard hasestablished restrictions which yields a very limited weather window for offshore cable installations. This is due to experience with cable failure in harsh weather. A limiting factor in current practice is the design criterion for the minimum allowable radius of curvature in the touchdown point. In addition, current practice does not allow for occurrence of compression in the touch down zone...

  16. Installation of a Roof Mounted Photovoltaic System

    Science.gov (United States)

    Lam, M.

    2015-12-01

    In order to create a safe and comfortable environment for students to learn, a lot of electricity, which is generated from coal fired power plants, is used. Therefore, ISF Academy, a school in Hong Kong with approximately 1,500 students, will be installing a rooftop photovoltaic (PV) system with 302 solar panels. Not only will these panels be used to power a classroom, they will also serve as an educational opportunity for students to learn about the importance of renewable energy technology and its uses. There were four different options for the installation of the solar panels, and the final choice was made based on the loading capacity of the roof, considering the fact that overstressing the roof could prove to be a safety hazard. Moreover, due to consideration of the risk of typhoons in Hong Kong, the solar panel PV system will include concrete plinths as counterweights - but not so much that the roof would be severely overstressed. During and after the installation of the PV system, students involved would be able to do multiple calculations, such as determining the reduction of the school's carbon footprint. This can allow students to learn about the impact renewable energy can have on the environment. Another project students can participate in includes measuring the efficiency of the solar panels and how much power can be produced per year, which in turn can help with calculate the amount of money saved per year and when we will achieve economic parity. In short, the installation of the roof mounted PV system will not only be able to help save money for the school but also provide learning opportunities for students studying at the ISF Academy.

  17. MICROCOSM - INSTALLATION OF THE LHC MODEL

    CERN Multimedia

    2002-01-01

    This week, installation of a 6m long section of the LHC starts in Microcosm. This full-scale model is the first part of a new exhibition highlighting the technological challenges and the exciting physics of the LHC era. Many people at CERN have helped with the preparations for the model and the Microcosm team would like to thank all those involved. An inauguration for the press will take place at the start of the next school term.

  18. Process computers automate CERN power supply installations

    CERN Document Server

    Ullrich, H

    1974-01-01

    Computerized automation systems are being used at CERN, Geneva, to improve the capacity, operational reliability and flexibility of the power supply installations for main ring magnets in the experimental zones of particle accelerators. A detailed account of the technological problem involved is followed in the article by a description of the system configuration, the program system and field experience already gathered in similar schemes. (1 refs).

  19. Optimal installation program for reprocessing plants

    International Nuclear Information System (INIS)

    Kubokawa, Toshihiko; Kiyose, Ryohei

    1976-01-01

    Optimization of the program of installation of reprocessing plants is mathematically formulated as problem of mixed integer programming, which is numerically solved by the branch-and-bound method. A new concept of quasi-penalty is used to obviate the difficulties associated with dual degeneracy. The finiteness of the useful life of the plant is also taken into consideration. It is shown that an analogous formulation is possible for the cases in which the demand forecasts and expected plant lives cannot be predicted with certainty. The scale of the problem is found to have kN binary variables, (k+2)N continuous variables, and (k+3)N constraint conditions, where k is the number of intervals used in the piece-wise linear approximation of a nonlinear objective function, and N the overall duration of the period covered by the installation program. Calculations are made for N=24 yr and k=3, with the assumption that the plant life is 15 yr, the plant scale factor 0.5, and the maximum plant capacity 900 (t/yr). The results are calculated and discussed for four different demand forecasts. The difference of net profit between optimal and non-optimal installation programs is found to be in the range of 50 -- 100 M$. The pay-off matrix is calculated, and the optimal choice of action when the demand cannot be forecast with certainty is determined by applying Bayes' theory. The optimal installation program under such conditions of uncertainty is obtained also with a stochastic mixed integer programming model. (auth.)

  20. Universal smoking installation of rotary type

    Directory of Open Access Journals (Sweden)

    Aminov V. A.

    2017-11-01

    Full Text Available According to the research carried out by the authors the most technological installations for producing meat and fish products are oriented only on one type of raw material (meat or fish, as well as the kind of smoking (cold or hot. Limitations are related to the maximum temperature of the drying agent that affects the product; presence of the system for maintaining the relative humidity of the air mixture; presence of the smoke cooling system coming from the smoke generator and a number of other factors. Enterprises expanding the range of products are forced to purchase new equipment. With a limited production area especially for small businesses this is not convenient. In the paper, a universal smoking installation of the rotor type (USIRT is considered for the production of both meat and fish products using cold or hot smoking. The installation is oriented to a wide range of products. The presence of the smoke cooling system will allow the production of cold smoking products, the presence of the dehumidification and humidification system for the smoke-air mixture will ensure the maintenance of the required technological regime for producing fish and meat products. Based on the example of cold smoking studies have shown that the duration of the process should be reduced while maintaining the quality of the product. For this purpose, ultrasonic (US vibrations have been applied to the smoke-air mixture in USIRT. The studies have been carried out to identify the best type of ultrasound radiators capable of transmitting vibrations of the installation metal surface and from it to pass into the smoke-air mixture in order to intensify the process of cold smoking. The necessary power of ultrasonic generators has been determined. Comparative results of technological processes with the application of ultrasound in the production of fish products have been presented.

  1. Installing Git under MacOS

    OpenAIRE

    Fitzpatrick, Benjamin

    2015-01-01

    Step by step guide to installing the version control software Git under the Macintosh Operating System MacOS X (and later). Includes a seqeunce of screenshots with hand drawn arrows ;-) These slides are part of the materials for an Introductory course on the R language and environment for statistial computing. Free and Open Source materials for this course hosted on GitHub: https://github.com/brfitzpatrick/Intro_to_R

  2. Statement of nuclear incidents at nuclear installations

    International Nuclear Information System (INIS)

    2001-07-01

    A statement of nuclear incidents at nuclear installations in Britain during the first quarter of 2001 is published today by the Health and Safety Executive. It covers the period 1 January to 31 March 2001. The statement is published under arrangements that came into effect from the first quarter of 1993, derived from the Health and Safety Commission's powers under section 11 of the Health and Safety at Work, etc. Act 1974

  3. The dismantling of CEA nuclear installations

    International Nuclear Information System (INIS)

    Piketty, Laurence

    2016-03-01

    After having indicated locations of French nuclear installations which are currently being dismantled (about 30 installations), and recalled the different categories of radioactive wastes with respect to their activity level and the associated storage options, this article gives an overview of various aspects of dismantling, more precisely in the case of installations owned and managed by the CEA. These operations comprise the dismantling itself, the recovery and packaging of wastes, old effluents and spent fuels. The organisation and responsible departments within the CEA are presented, and the author outlines some operational problematic issues met due to the age of installations (traceability of activities, regulation evolutions). The issue of financing is then discussed, and its uncertainties are outlined. The dismantling strategy within the CEA-DEN is described, with reference to legal and regulatory frameworks. The next parts of the article address the organisation and the economic impact of these decontamination and dismantling activities within the CEA-DEN, highlight how R and D and advanced technology are a support to this activities as R and D actions address all scientific and technical fields of nuclear decontamination and dismantling. An overview of three important dismantling works is proposed: Fontenay-aux-Roses, the Marcoule CEA centre (a reference centre in the field of nuclear dismantling and decontamination) and the Grenoble CEA centre (reconversion in R and D activities in the fields of technologies of information, of communication, technologies, for health, and in renewable energies). The last part addresses the participation to the Strategic Committee of the Nuclear Sector (CSFN)

  4. Installation for producing sealed radioactive sources; Installation de fabrication de sources radioactives scellees

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J.; Hayoun, C. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [French] Cette installation a ete concue et realisee pour effectuer des fabrications de sources scellees d'elements de fission: caesium 137 - strontium 90 - promethium 147 - ruthenium 106 - cerium 144 en particulier. L'installation est composee de cellules etanches et protegees, chacune d'elles etant affectee a une fabrication particuliere. La securite et la surete de fonctionnement de l'ensemble sont parmi les elements principaux qui ont guide l'etude. Le rapport decrit l'installation et plus particulierement l'appareillage utilise ainsi que les divers controles et commandes. Le bilan de fonctionnement apres 6 ans d'exploitation sert de conclusion. (auteurs)

  5. Installation for producing sealed radioactive sources; Installation de fabrication de sources radioactives scellees

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Hayoun, C [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This installation has been designed and built for producing sealed sources of fission elements: caesium 137, strontium 90, promethium 147, ruthenium 106 and cerium 144 in particular. The installation consists of sealed and protected cells, each being assigned to a particular production. The safety and the operational reliability of the equipment are the principal considerations which have governed this work. The report describes the installation and, in particular, the apparatus used as well as the various control devices. In conclusion, a review as presented of six years operation. (authors) [French] Cette installation a ete concue et realisee pour effectuer des fabrications de sources scellees d'elements de fission: caesium 137 - strontium 90 - promethium 147 - ruthenium 106 - cerium 144 en particulier. L'installation est composee de cellules etanches et protegees, chacune d'elles etant affectee a une fabrication particuliere. La securite et la surete de fonctionnement de l'ensemble sont parmi les elements principaux qui ont guide l'etude. Le rapport decrit l'installation et plus particulierement l'appareillage utilise ainsi que les divers controles et commandes. Le bilan de fonctionnement apres 6 ans d'exploitation sert de conclusion. (auteurs)

  6. Numerical simulation of installation of skirt foundations

    Energy Technology Data Exchange (ETDEWEB)

    Vangelsten, Bjoern Vidar

    1997-12-31

    Skirt foundation has been increasingly used for permanent offshore oil installations and anchors for drilling ships. Suction is commonly used in skirt foundation installing. If a large amount of suction is applied, the soil around the foundation may fail and the foundation become useless. This thesis studies failure due to high seepage gradients, aiming to provide a basis for reducing the risk of such failures. Skirt penetration model testing has shown that to solve the problem one must understand what is going on at the skirt tip during suction installation. A numerical model based on micro mechanics was developed as continuum hypothesis was seen to be unsuitable to describe the processes in the critical phases of the failure. The numerical model combines two-dimensional elliptical particles with the finite difference method for flow to model water flow in a granular material. The key idea is to formulate the permeability as a function of the porosity of the grain assembly and so obtain an interaction between the finite difference method on flow and the particle movement. A computer program, DYNELL, was developed and used to simulate: (1) weight penetration of a skirt wall, (2) combined suction and weight penetration of a skirt wall, and (3) critical gradient tests around a skirt wall to study failure mechanisms. The model calculations agree well with laboratory experiments. 16 refs., 124 figs., 21 tabs.

  7. Design of the Los Alamos generator installation

    International Nuclear Information System (INIS)

    Boenig, H.J.; Schillig, J.B.; Rogers, J.D.; Huddleston, S.W.; Konkel, H.E.; Rosev, B.J.

    1989-01-01

    A 1430 MVA synchronous generator from a cancelled nuclear power plant is being installed at Los Alamos to be used as the pulsed power generator for the Confinement Physics Research Facility. The generator is mounted on a spring foundation to avoid dynamic forces from being transmitted to the substructure and the ground. A 6 MW load-commutated inverter drive will accelerate the machine from standstill to the maximum operating speed of 1800 rpm and from 1260 rpm to 1800 rpm between load pulses. The generator cooling method is being changed from hydrogen to air cooling. A current limiting fuse, with a fuse clearing current of 80 kA, will protect the generator output against short circuit currents. Changes in the excitation system are described. A status report of the installation and an approximate schedule for completing the installation are presented. The paper also addresses results of special studies and tests undertaken to evaluate the condition of the generator and to predict the behavior of some critical mechanical generator components under pulsed loading conditions. 1 ref., 4 figs., 2 tabs

  8. AWAKE starts the equipment installation phase

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    AWAKE is the proof-of-principle experiment whose aim is to use protons to generate powerful wakefields to accelerate an electron beam. With accelerator gradients hundreds of times higher than those used in current systems, this technique could revolutionise the field of particle acceleration. Installed in the tunnel previously used by the CNGS facility, AWAKE is completing the service installation phase and will receive the plasma cell in the coming months.   The AWAKE proton line with all the magnets installed. (Image: AWAKE collaboration.) AWAKE is the world’s first proton-driven plasma wakefield acceleration experiment. In AWAKE, a beam of protons from the SPS will be travelling through a plasma cell and this will generate a wakefield that, in turn, will accelerate an electron beam. A laser will ionise the gas in the plasma cell and seed the self-modulation instability that will trigger the wakefield in the plasma. The project aims to prove that the plasma wakefield can be driv...

  9. DOD low energy model installation program

    International Nuclear Information System (INIS)

    Fournier, D.F. Jr.

    1993-01-01

    The Model Low Energy Installation Program is a demonstration of an installation-wide, comprehensive energy conservation program that meets the Department of Defense (DoD) energy management goals of reducing energy usage and costs by at least 20%. It employs the required strategies for meeting these goals, quantifies the environmental compliance benefits resulting from energy conservation and serves as a prototype for DoD wide application. This project will develop both analysis tools and implementation procedures as well as demonstrate the effectiveness of a comprehensive, coordinated energy conservation program based on state-of-the-art technologies. A military installation is in reality a small to medium sized city. It generally has a complete utilities infrastructure including water supply and distribution, sewage collection and treatment, electrical supply and distribution, central heating and cooling plants with thermal distribution, and a natural gas distribution system. These utilities are quite extensive and actually consume about 10-15% of the energy on the facility not counting the energy going into the central plants

  10. A General Purpose High Performance Linux Installation Infrastructure

    International Nuclear Information System (INIS)

    Wachsmann, Alf

    2002-01-01

    With more and more and larger and larger Linux clusters, the question arises how to install them. This paper addresses this question by proposing a solution using only standard software components. This installation infrastructure scales well for a large number of nodes. It is also usable for installing desktop machines or diskless Linux clients, thus, is not designed for cluster installations in particular but is, nevertheless, highly performant. The infrastructure proposed uses PXE as the network boot component on the nodes. It uses DHCP and TFTP servers to get IP addresses and a bootloader to all nodes. It then uses kickstart to install Red Hat Linux over NFS. We have implemented this installation infrastructure at SLAC with our given server hardware and installed a 256 node cluster in 30 minutes. This paper presents the measurements from this installation and discusses the bottlenecks in our installation

  11. Une voix dans un chœur risque de n’être point entendue. André Gide et La Nouvelle Revue française, 1908-1914

    NARCIS (Netherlands)

    Koffeman, M.N.; Wittmann, Jean-Michel

    2017-01-01

    Cet article étudie la tension entre l’individualisme gidien et la collectivité littéraire que forme la première Nouvelle revue française. Entreprise commune par excellence, la revue gagne à être considérée dans son ensemble. Une lecture des sommaires de la NRF relativise le rôle de Gide et met en

  12. Print Culture and the New Maritime Frontier in Rangoon and Penang Culture de l’imprimé et nouvelle frontière maritime à Rangoon et Penang

    Directory of Open Access Journals (Sweden)

    Su Lin Lewis

    2012-10-01

    Full Text Available From the mid-19th century, vast improvements in steamship and communication technology created an interlinked network of port-cities in the Indian Ocean and maritime Asia. Though Rangoon and Penang had starkly different relationships to colonial rule, they shared a lineage as multi-ethnic ports where various communities had existed side-by-side for centuries. The advent of the Victorian era fostered new class and racial divisions between them, yet also created a new feuilleton culture in the port-city with the mushrooming of newspapers, books, and a new reading public. Diverse ethnic and linguistic communities sought platforms to articulate their concerns and inform themselves of the affairs of the world, and their place within it. Burmese in Rangoon, imbued with a renewed sense of cultural pride, absorbed the rising tide of anticolonialism nationalism echoing throughout the world. Penangites transformed their society using the liberal, cosmopolitan tenants of imperial citizenship to make political and cultural claims for a multi-ethnic society. The vibrant, outward-looking atmosphere of the colonial port-city as a node of information and cultural exchange made Penang and Rangoon the intellectual staging grounds for new visions of the nation.À compter du milieu du xixe siècle, d’importantes améliorations dans la navigation à vapeur et les technologies des communications ont créé un réseau de villes portuaires dans l’Océan indien et l’Asie maritime. Même si Rangoon et Penang avaient des relations divergentes avec la puissance coloniale, elles participaient d’un type identique comme ports où cohabitaient depuis des siècles des communautés d’ethnies différentes. L’ère victorienne conduisit à de nouvelles divisions sociales et ethniques, mais suscita dans la ville portuaire une nouvelle culture littéraire avec le foisonnement des journaux, des livres et un nouveau lectorat. Les communautés ethniques et linguistiques

  13. An application of residual current protective device at electrical installation

    International Nuclear Information System (INIS)

    Firman Silitonga

    2008-01-01

    In an electrical installation, a protection for overload and short circuit are always to be installed. In addition to the installation, it is necessary to be installed a protection device for residual current because both the short circuit and the overload device protection will not work for the residual current. The quantity of the residual current must be defined first at any electrical installation to define an appropriate residual current protection so that not every residual current will break the circuit down. This paper will explain a method how to install a residual protection device for 3500 VA or more at TN and TT of earthing system. (author)

  14. Does drywall installers' innovative idea reduce the ergonomic exposures of ceiling installation: A field case study.

    Science.gov (United States)

    Dasgupta, Priyadarshini Sengupta; Punnett, Laura; Moir, Susan; Kuhn, Sarah; Buchholz, Bryan

    2016-07-01

    The study was conducted to assess an intervention suggested by the workers to reduce the physical or ergonomic exposures of the drywall installation task. The drywall installers were asked to brainstorm on innovative ideas that could reduce their ergonomic exposures during the drywall installation work. The workers proposed the idea of using a 'deadman' (narrow panel piece) to hold the panels to the ceiling while installing them. The researcher collected quantitative exposure data (PATH, 3DSSPP) at the baseline and intervention phases and compared the phases to find out any change in the exposure while using the 'deadman'. Results showed that ergonomic exposures (such as overhead arm and awkward trunk postures and heavy load handling) were reduced at the intervention phase while using the 'deadman' with an electrically operated lift. The concept of the 'deadman', which was shown to help reduce musculoskeletal exposures during ceiling installation, can be used to fabricate a permanent ergonomic tool to support the ceiling drywall panel. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  15. Relation de service, rapport social de service : Quelle grille d’analyse ? Analysing service relationships and service-based social relationships. Debate with the editors of the Nouvelle Revue du Travail Relación de servicio, vínculo social de servicio: ¿qué modelo analítico? Debate con la redacción de la Nouvelle Revue du Travail

    Directory of Open Access Journals (Sweden)

    Guillaume Tiffon

    2013-03-01

    Full Text Available Dans un échange avec la Nouvelle Revue du Travail, Pascal Ughetto et Philippe Zarifian prolongent la controverse sur les grilles d’analyse des services, en discutant les pré-requis sur lesquels reposent leurs postures respectives. Ce débat fait suite à leurs contributions dans le dossier Controverses de ce numéro « Relation de service, rapport social de service. Quelle grille d’analyse ? »In a conversation with the Nouvelle Revue du Travail, Pascal Ughetto and Philippe Zarifian address the controversy about service-related analytical grids, by focusing on the preconditions underlying each grid’s particular orientation. The debate follows their contributions to the Controverses special section found in a special issue called “Analysing service relationships and service-based social relationships”En una conversación con la Nouvelle Revue du Travail, Pascal Ughetto y Philippe Zarifian prolongan la controversia sobre los modelos analíticos de los servicios, debatiendo sobre los prerrequisitos en los cuales se apoyan sus respectivas posturas. Ese debate ha surgido tras sus contribuciones al número especial Controverses de esta edición “Relación de servicio, vínculo social de servicio. ¿Qué modelo analítico ?

  16. Seminar on the news energy utilization in rural area of April 3 to March 24 , 1980 in Reo, Upper Volta[Energie renouvelable ; Zone rurale ; Gaz biologique ; Energie solaire ; Sechoir solaire]; Seminaire sur l'utilisation des energies nouvelles en zone rurale du 24 mars au3 avril 1980 a Reo, Haute Volta

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-04-15

    volume of transport much more reduced. Mastering these new technologies will help fight efficiently against desertification, and fruits and vegetables rotting. [French] L'acces a l'energie par toutes les populations reste une des preoccupations du Gouvernement de Haute Volta (Burkina Faso). C'est ainsi que sous l'egide de la Communaute Economique de l Afrique de l'Ouest (CEAO), de l'Agence Canadienne de Developpement International et du Mouvement Scout, un seminaire sur l'utilisation des energies renouvelables en zone rurale y a ete organise. Il s'agit pour les participants venus de plusieurs pays, d'apprendre a mettre en pratique, l'utilisation des energies nouvelles telles la cuisiniere a feu ferme, le gaz biologique, le chauffe- eau solaire et le sechoir solaire. L'adoption de ces nouvelles sources d'energie par les populations permettrait de pallier les problemes de desertification lies au deboisement intensif dans le pays. Tous les participants a cette rencontre sont donc sensibilises pour qu'ils apportent leur contribution et celle des populations de leurs terroirs respectifs pour une meilleure conservation des ressources naturelles disponibles. Cela passe aussi par la construction de cuisinieres a feu ferme qui permettent d'avoir deux sources d'energie. Ce type de foyer est d'une construction facile et utilisable seulement trois jours apres. Il permet d'eviter la perte d'energie qui caracterisait le foyer traditionnel (pres de 95% de perte d'energie) ; ce qui revient a consommer moins de bois tout en assurant un rendement de l'ordre de 60 a 70%. Il s'est agi pour les participants aux travaux de s'initier a l'installation de gaz suivant des modeles chinois et indien . Ils ont donc ete inities a la realisation des technologies de production de gaz biologique a travers la maitrise du schema de principe du procede de fermentation discontinue. De meme, ils ont acquis le savoir- faire sur les techniques de mise en place du chauffe- eau solaire par insolateur et du

  17. Skaha Lake crossing, innovations in pipeline installation

    International Nuclear Information System (INIS)

    Fernandez, M.L.; Bryce, P.W.; Smith, J.D.

    1995-01-01

    This paper describes the construction of a 10.8 km long NPS16 (406 mm, 16 inch diameter) pipeline, across Skaha Lake, in the south Okanagan valley, British Columbia, Canada. The water crossing is part of the 32 km South Okanagan Natural Gas Pipeline Project (SONG) operated by BC Gas. The pipeline is located in a region dependent on year-round tourism. Therefore, the design and construction was influenced by sensitive environmental and land use concerns. From earlier studies, BC Gas identified surface tow or lay as preferred installation methods. The contractor, Fraser River Pile and Dredge departed from a conventional laybarge methodology after evaluating environmental data and assessing locally available equipment. The contractor proposed a surface tow with multiple surface tie-ins. This approach modification to the ''Surface Tow and Buoy Release Method'' (STBRM) used previously with success on relatively short underwater pipelines. A total of 10 pipe strings, up to 1 km long, were towed into position on the lake and tied-in using a floating platform. The joined pipeline was lowered to the lakebed by divers releasing buoys while tension was maintained from a winch barge at the free end of the pipeline. From analysis and field verified measurement the installation stresses were well below the allowable limits during all phases of construction. The entire construction, including mobilization and demobilization, lasted less than three months, and actual pipelaying less than three weeks. Installation was completed within budget and on schedule, without any environmental or safety related incidents. The SONG pipeline became operational in December 1994

  18. Development and installation of the GERDA experiment

    International Nuclear Information System (INIS)

    Smolnikov, A

    2010-01-01

    The progress in the development of the GERDA (GErmanium Detector Array) experiment is presented. The goal of the experiment is the search for neutrinoless double beta decay of 76 Ge with considerable reduction of background in comparison with predecessor experiments. GERDA will operate bare germanium semiconductor detectors (enriched in 76 Ge) submerged in high purity liquid argon supplemented by a water shield. The experimental set up is currently under construction in the underground facility of LNGS, Italy. The results of various R and D efforts and the main steps of the GERDA set up design and installation are given as well as several novel methods for background reduction are described.

  19. Basic electrical installation work level 2

    CERN Document Server

    Linsley, Trevor

    2015-01-01

    Everything needed to pass the first part of the City & Guilds 2365 Diploma in Electrical InstallationsUpdated in line with the 3rd Amendment of the 17th Edition IET Wiring Regulations, this new edition covers the City & Guilds 2365-02 course. Written in an accessible style with a chapter dedicated to each unit of the syllabus, this book helps you to master each topic before moving on to the next. End of chapter revision questions enable learners to check their understanding and consolidate key concepts learnt in each chapter. With a companion website containing videos, animations, worksheets a

  20. RF installation for the grain disinfestation

    CERN Document Server

    Zajtzev, B V; Kobetz, A F; Rudiak, B I

    2001-01-01

    The ecologically pure method of grain product disinfestations through the grain treatment with the RF electric field is described. The experimental data obtained showed that with strengths of the electrical RF field of E=5 kV/cm and frequency of 80 MHz the relative death rate is 100%.The time of the grain treatment it this case is 1 sec. The pulses with a duration of 600 mu s and repetition rate of 2 Hz were used, the duration of the front was 10 mu s. The schematic layout of installation with a productivity of 50 tones/h and power of 10 kW is given.

  1. Safety culture in nuclear installations. Proceedings

    International Nuclear Information System (INIS)

    Carnino, A.; Weimann, G.

    1995-04-01

    These proceedings of the International Topical Meeting on Safety Culture in Nuclear Installations held in Vienna, Austria from 24 to 28 April 1995 provide a wide forum of information exchange and discussions on the topic safety culture in nuclear power plants. Safety culture deals with human factors since it deals with attitudes, organization and management. It then means that it has a natural component in it which is linked to the national culture and education. There are about 95 contributions, some of them presented by title and abstract only. All of them are in the subject scope of INIS. (Botek)

  2. Estimating Wear Of Installed Ball Bearings

    Science.gov (United States)

    Keba, John E.; Mcvey, Scott E.

    1993-01-01

    Simple inspection and measurement technique makes possible to estimate wear of balls in ball bearing, without removing bearing from shaft on which installed. To perform measurement, one observes bearing cage while turning shaft by hand to obtain integral number of cage rotations and to measure, to nearest 2 degrees, number of shaft rotations producing cage rotations. Ratio between numbers of cages and shaft rotations depends only on internal geometry of bearing and applied load. Changes in turns ratio reflect changes in internal geometry of bearing provided measurements made with similar bearing loads. By assuming all wear occurs on balls, one computes effective value for this wear from change in turns ratio.

  3. Process computers automate CERN power supply installations

    International Nuclear Information System (INIS)

    Ullrich, H.; Martin, A.

    1974-01-01

    Higher standards of performance and reliability in the power plants of large particle accelerators necessitate increasing use of automation. The CERN (European Nuclear Research Centre) in Geneva started to employ process computers for plant automation at an early stage in its history. The great complexity and extent of the plants for high-energy physics first led to the setting-up of decentralized automatic systems which are now being increasingly combined into one interconnected automation system. One of these automatic systems controls and monitors the extensive power supply installations for the main ring magnets in the experimental zones. (orig.) [de

  4. Licensing systems and inspection of nuclear installations

    International Nuclear Information System (INIS)

    1991-01-01

    The first study analysing the regulations governing the licensing and inspection of nuclear installations in OECD countries was published by OECD/NEA in 1980, and revised in 1986. Since then there have been amendments to national regulations on the subject, which have warranted updating of this publication. This new study provides a description of the licensing regulations and practices applied in the twenty OECD countries with provisions in that field. The national systems have been described according to a standard format to make comparisons and research easier. In most cases, the descriptions are supplemented by flow charts illustrating the procedures and specifying the different authorities involved in the licensing procedures [fr

  5. Small wind planning and building successful installations

    CERN Document Server

    Clark, Nolan

    2013-01-01

    This book provides a cohesive guide to achieving successful small wind installations. It is a comprehensive information resource from one of the world's most experienced small wind professionals, covering all the key issues for small wind system development, from site and machine selection to international standards compliance. Engineers who are tasked with planning and developing these small wind systems, from choosing the best site and accurately estimating likely power output to obtaining proper permitting and troubleshooting operational inefficiencies, will find this book an ess

  6. Jim Walter Resources installs new overland conveyor

    Energy Technology Data Exchange (ETDEWEB)

    Fiscor, S.

    2008-12-15

    Embarking on a major expansion plan, the company is constructing a new additional overland conveyor coal to a recently refurbished prep plant. Jim Walter Resources recently invested $20 million in a new 5-mile overland conveyor system to haul coal from the No.7 deep coal mine in Alabama to the No.5 coal preparation plant. The size of the No.7 mine was effectively doubled. The article describes how this expansion move was decided upon and describes the design and installation of the new conveyor which spans approximately 5 miles. 4 photos.

  7. Extractive metalurgical pilot plant. Project and installation

    International Nuclear Information System (INIS)

    Paula, H.C.B.; Rolim, T.L.; Santana, A.O. de; Santos, F.S.M. dos; Dantas, C.C.

    1986-01-01

    An extractive metalurgical pilot plant with a flow capacity of 200l/h of phosphoric leach, recovering 80% of the uranium content has been designed and installed. Starting from the diagrams of the chemical process in the laboratory scale, the equipment worksheet of the basic project were developed. The procedure for dimensioning and positioning of each component is described. An isometric figure and the pilot plant lay-out are included. The pilot plant occupying 41 m 2 has been tested and operates at its nominal capacity. (author) [pt

  8. Safety culture in nuclear installations. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Carnino, A [ed.; International Atomic Energy Agency, Vienna (Austria); Weimann, G [ed.; Oesterreichisches Forschungszentrum Seibersdorf GmbH (Austria)

    1995-04-01

    These proceedings of the International Topical Meeting on Safety Culture in Nuclear Installations held in Vienna, Austria from 24 to 28 April 1995 provide a wide forum of information exchange and discussions on the topic safety culture in nuclear power plants. Safety culture deals with human factors since it deals with attitudes, organization and management. It then means that it has a natural component in it which is linked to the national culture and education. There are about 95 contributions, some of them presented by title and abstract only. All of them are in the subject scope of INIS. (Botek).

  9. CAST with its micromegas detector installed.

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    The CERN Axion Solar Telescope (CAST) uses a prototype LHC dipole magnet to search for very weakly interacting neutral particles called axions, which should originate in the core of the Sun. The magnet converts the solar axions to photons which are then detected by an X-ray detector based on Micromegas technology. CAST's Micromegas detector has now been installed. Photos 01 02: General view of the CAST experiment with the Micromegas detector in place. Photo 03: Close-up of the micromegas set-up.

  10. Border installations: the experience of Wackersdorf

    International Nuclear Information System (INIS)

    Heller, K.

    1988-01-01

    Following the decision of the Government of the Federal Republic of Germany to construct a fuel reprocessing plant (in the wider context of organising radioactive waste disposal) at Wackersdorf, 130 km from the Austrian border, actions were brought against the German constructor before Austrian and German courts. The author describes the mechanisms governing administrative procedures in both countries and their connection with public international law. He analyses the legal argumentations developed before the different courts as well as the debate on the concept of territoriality and border installations (NEA) [fr

  11. Solution for remote handling in accelerator installations

    International Nuclear Information System (INIS)

    Burgerjon, J.J.; Ekberg, E.L.; Grisham, D.L.; Horne, R.A.; Meyer, R.E.; Flatau, C.R.; Wilson, K.B.

    1977-01-01

    A description is given of a remote-handling system designed for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF), versatile enough to be used in a variety of situations found around particle accelerators. The system consists of a bilateral (force-reflecting) servomanipulator installed on an articulated hydraulic boom. The boom also carries the necessary tools and observation devices. The whole slave unit can be moved by crane or truck to the area of operation. A control cable connects the slave unit with the control station, located at a safe distance in a trailer. Various stages of development as well as some operating experience are discussed

  12. Proper Installation of New Windows | Efficient Windows Collaborative

    Science.gov (United States)

    Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

  13. 30 CFR 57.12067 - Installation of transformers.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of transformers. 57.12067 Section... Electricity Surface Only § 57.12067 Installation of transformers. Transformers shall be totally enclosed, or... wiring. ...

  14. 46 CFR 176.702 - Installation tests and inspections.

    Science.gov (United States)

    2010-10-01

    ..., machinery, fuel tank, or pressure vessel is installed aboard a vessel after completion of the initial... 100 GROSS TONS) INSPECTION AND CERTIFICATION Repairs and Alterations § 176.702 Installation tests and...

  15. Design and installation package for a solar powered pump

    Science.gov (United States)

    1978-01-01

    The design and installation procedures of a solar powered pump developed by Calmac Manufacturing Company are presented. Subsystem installation, operation and maintenance requirements, subsystem performance specifications, and detailed design drawings are included.

  16. Rules and regulations on ionizing radiations sources installations

    International Nuclear Information System (INIS)

    1980-01-01

    The finality of this legislative text is to establish the standards and procedures for site, design, building, operation and decommissioning of nuclear installations, radioactive installations and ionizing radiations sources. This text include the commercialization of radioactive substances and equipment fabrication

  17. Professional operation and management of nuclear island installation

    International Nuclear Information System (INIS)

    Ma Limin

    2011-01-01

    As an important part of nuclear power plant construction, nuclear island installation mainly involves main equipment installation, pipeline installation, associated procedure examination and other important tasks. However, due to the nuclear island installation management changing from single project to multi-projects, the problems such as professional management of nuclear island installation and the lack of technical staff become more and more prominent and become one of the key restricts to the work of nuclear island installation. Based on analysis of the single project, single-base nuclear island installation management and practice, combined with the current situation that multi-project and multi-base construction of nuclear power are carrying out at the same time, this paper proposes a new management model of nuclear island installation. (author)

  18. LHC: installation du plus grand trajectographe au silicium du monde

    CERN Multimedia

    2008-01-01

    The installation of the largest silicon trajectograph of the world was concluded at CERN. Thursday December 13 at dawn, the silicon trajectograph with ribbons of CMS (*) began its trip from the principal site of CERN to its installation of experimentation.

  19. Planning and installing photovoltaic systems a guide for installers, architects and engineers

    CERN Document Server

    Deutsche Gesellschaft für Sonnenenergie (DGS)

    2013-01-01

    New third edition of the bestselling manual from the German Solar Energy Society (DGS), showing you the essential steps to plan and install a solar photovoltaic system. With a global focus, it has been updated to include sections on new technology and concepts, new legislation and the current PV market.Updates cover:new developments in inverter and module technologymarket situation worldwide and outlookintegration to the grid (voltage stabilization, frequency, remote control)new legal requirements for installation and planningoperational costs for dismantling and recyclingfeed-in managementnew requirements for fire protectionnew requirements in Europe for electric waste (Waste Electrical and Electronic Equipment, WEEE) and the restriction of the use of certain hazardous substances (RoHS).Also providing information on current developments in system design, economic analysis, operation and maintenance of PV systems, as well as new software tools, hybrid and tracking systems.An essential manual for installers, e...

  20. O inventário das curiosidades botânicas da Nouvelle France de Pierre-François-Xavier de Charlevoix (1744 The inventory of botanical curiosities in Pierre-François-Xavier de Charlevoix's Nouvelle France (1744

    Directory of Open Access Journals (Sweden)

    Michel Kobelinski

    2013-03-01

    Full Text Available Verifica a extensão dos aportes botânicos de Pierre-François-Xavier de Charlevoix em Histoire et description générale de la Nouvelle France em relação a trabalhos de pesquisadores anteriores, suas valorações das representações iconográficas e discursivas e aplicabilidade no projeto de colonização francesa. Investiga-se o que o levou a preterir o modelo taxionômico de Lineu e o que pretendia com seu catálogo de curiosidades botânicas. O desenlace de sua trajetória filosófico-religiosa permite compreender seu posicionamento no quadro de classificação da natureza, os sentidos das informações etnológicas, as formas de apropriação intelectual e os usos da iconografia botânica e do discurso como propaganda político-emotiva para incentivar a ocupação colonial.The article explores the botanical contributions of Pierre-François-Xavier de Charlevoix's book Histoire et description générale de la Nouvelle France vis-à-vis the contributions of previous researchers, his use of iconographic and discursive representations and its relevance to the project of French colonization. It investigates why he refused Linnaeus' taxonomic model and what he intended with his catalogue of botanical curiosities. The unfolding of his philosophical and religious trajectory allows to understand his stance regarding the classification of nature, the meanings of ethnological information, his forms of intellectual appropriation, and his use of discourse and botanical iconography as political and emotional propaganda to encourage colonial settlement.

  1. Classified installations for environmental protection subject to declaration. Tome 2

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Legislation concerning classified installations govern most of industries or dangerous or pollutant activities. This legislation aims to prevent risks and harmful effects coming from an installation, air pollution, water pollution, noise, wastes produced by installations, even aesthetic bad effects. Pollutant or dangerous activities are defined in a list called nomenclature which obliged installations to a rule of declaration or authorization. Technical regulations ordered by the secretary of state for the environment are listed in tome 2

  2. The Dismantling of Nuclear Installations in France

    International Nuclear Information System (INIS)

    Bonnaure, P.

    2011-01-01

    As we saw in the previous article by Pierre Bonnaure, though it has long been decried for the dangers inherent in its production structures and the very long-lived waste that it generates, nuclear power may yet recover its credibility, particularly in France. However, on close examination, we see that the nuclear industry is beset by a number of unresolved questions, beginning with the dismantling of installations that have become obsolete or are set to become so. Nuclear power took off after the Second World War, but several generations of technology have been developed since then, and most currently functioning power-stations - mainly second-generation installations - are theoretically nearing the end of their useful lives, at least in terms of what was said when they were being built. The problem therefore arises of their dismantling and the clean-up of the sites on which they were built, a thorny question on which Pierre Bonnaure casts light in this article (prospects, strategies, financing, management of waste etc.). Unfortunately, it emerges that in France nothing has really been resolved, that public debate on the matter is decidedly limited and that investment (both financial investment and research) is not commensurate with the needs of a sector which is, after all, the source of three quarters of national electricity production. (author)

  3. Propeller installation effects on turboprop aircraft acoustics

    Science.gov (United States)

    Chirico, Giulia; Barakos, George N.; Bown, Nicholas

    2018-06-01

    Propeller installation options for a twin-engined turboprop aircraft are evaluated at cruise conditions, aiming to identify the quieter configuration. Computational fluid dynamics is used to investigate the near-field acoustics and transfer functions are employed to estimate the interior cabin noise. Co-rotating and counter-rotating installation options are compared. The effect of propeller synchrophasing is also considered. The employed method captures the complexity of the acoustic field generated by the interactions of the propeller sound fields among each other and with the airframe, showing also the importance of simulating the whole problem to predict the actual noise on a flying aircraft. Marked differences among the various layouts are observed. The counter-rotating top-in option appears the best in terms of acoustics, the top-out propeller rotation leading to louder noise because of inflow conditions and the occurrence of constructive acoustic interferences. Synchrophasing is shown to be beneficial for co-rotating propellers, specially regarding the interior noise, because of favorable effects in the interaction between the propeller direct sound field and the noise due to the airframe. An angle closer to the maximum relative blade shift was found to be the best choice, yielding, however, higher sound levels than those provided by the counter-rotating top-in layout.

  4. Performance of Installed Cooking Exhaust Devices

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Brett C.; Delp, William W.; Apte, Michael G.; Price, Philip N.

    2011-11-01

    The performance metrics of airflow, sound, and combustion product capture efficiency (CE) were measured for a convenience sample of fifteen cooking exhaust devices, as installed in residences. Results were analyzed to quantify the impact of various device- and installation-dependent parameters on CE. Measured maximum airflows were 70% or lower than values noted on product literature for 10 of the devices. Above-the-cooktop devices with flat bottom surfaces (no capture hood) – including exhaust fan/microwave combination appliances – were found to have much lower CE at similar flow rates, compared to devices with capture hoods. For almost all exhaust devices and especially for rear-mounted downdraft exhaust and microwaves, CE was substantially higher for back compared with front burner use. Flow rate, and the extent to which the exhaust device extends over the burners that are in use, also had a large effect on CE. A flow rate of 95 liters per second (200 cubic feet per minute) was necessary, but not sufficient, to attain capture efficiency in excess of 75% for the front burners. A-weighted sound levels in kitchens exceeded 57 dB when operating at the highest fan setting for all 14 devices evaluated for sound performance.

  5. Regulation for installation and operation of reactor

    International Nuclear Information System (INIS)

    1977-01-01

    Concerning the description of an application for the approval of installation of a reactor, stipulated in Article 23 paragraph 2 of the Law for Regulation of Nuclear Source Materials, Nuclear Fuel Materials and Reactors (hereinafter referred to as the Law), the following items must be written. Namely, the heat output of the reactor in Article 23 paragraph 2 item 3 of the Law, the position, structure and facilities of the reactor facilities, described according to the stipulated classifications, the work plan, nuclear fuel materials employed, and the disposal of spent fuel. Concerning an application for the approval of a reactor installed aboard a foreign ship, stipulations are made separately. Description of an application for the approval of change of the heat output of a reactor and others should include the stipulated items. When it is wished to undergo inspection of the construction and performance of reactor facilities, an application for that end including the required items should be filed. Various safety measures preventing personnel from being exposed to radiation should be taken. When a foreign atomic-powered ship tries to enter a Japanese port, the stipulated necessary informations should be reported 60 days before such ship actually enters the Japanese port. A chief technician of reactors should take and pass the official examination. (Rikitake, Y.)

  6. Emotion in Painting and Art Installations.

    Science.gov (United States)

    Konečni, Vladimir J

    2015-01-01

    Paintings are static 2-dimensional images with limited narrative means. On the basis of a critical analysis of the relevant laboratory scaling studies, museum studies, and neuroaesthetic work, the article reaches a negative conclusion about most paintings' ability to engage sufficiently with general viewers' associative-memory systems, so as to lead to identification and empathy, and induce fundamental psychobiological emotions. In contrast, designers of art installations can draw on subtle combinations of several classes of stimulus properties with psychological significance subsumable under the classical concept of the sublime (physical grandeur, rarity, an association with beauty and with biologically significant outcomes), so that some installations may induce the peak aesthetic emotional response, aesthetic awe--as defined in Aesthetic Trinity Theory (Konečni, 2005, 2011), along with the states of being moved and physiological thrills. The approach also involves an analytical skepticism about emotivism, defined as a culturological proclivity for unnecessary insertion of emotion into accounts of mental life and behavior, especially in the arts. Implications for the role of emotion theory in empirical aesthetics are examined.

  7. IMPACT DE L’ORIENTATION SUR LE CONFORT THERMIQUE INTERIEUR DANS L’HABITATION COLLECTIVE : Cas de la nouvelle ville Ali Mendjeli, Constantine

    Directory of Open Access Journals (Sweden)

    S BELLARA LOUAFI

    2009-06-01

    Une étude est effectuée sur le site de la nouvelle ville ALI MENDJELI de Constantine afin de comparer et de chercher la relation entre les éléments du climat et l’orientation. Une investigation sur terrain (relevé des températures, humidité relatives, températures de surfaces est entreprise pour évaluer la réponse quantitative globale pour ce type de climat (semi aride. Parallèlement à cela une simulation à l’aide d’un logiciel TRNSYS (version 14.1 a été effectuée pour tester plusieurs possibilités d’orientations et d’améliorations afin de déterminer les éléments qui peuvent servir à des conditions meilleures. Les résultats montrent que la prise en compte du critère orientation fait participer le bâtiment à une conception plus performante thermiquement et plus économe énergétiquement.

  8. A new method for dosing uranium in biological media; Nouvelle methode de dosage de l'uranium dans les milieux biologiques

    Energy Technology Data Exchange (ETDEWEB)

    Henry, Ph; Kobisch, Ch [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report describes a new method for dosing uranium in biological media based on measurement of alpha activity. After treatment of the sample with a mineral acid, the uranium is reduced to the valency four by trivalent titanium and is precipitated as phosphate in acid solution. The uranium is then separated from the titanium by precipitation as UF{sub 4} with lanthanum as carrier. A slight modification, unnecessary in the case of routine analyses, makes it possible to eliminate other possible alpha emitters (thorium and transuranic elements). (authors) [French] Ce rapport decrit une nouvelle methode de dosage de l'uranium dans les milieux biologiques par mesure de l'activite alpha. Apres mineralisation de l'echantillon, l'uranium est reduit a la valence IV par le titane trivalent et precipite en milieu acide sous forme de phosphate. L'uranium est ensuite separe du titane par precipitation a l'etat d'UF{sub 4} avec du lanthane entraineur. Une legere modification, inutile dans le cas d'analyses de routine, permet d'effectuer l'elimination d'autres emetteurs alpha eventuels (thorium et transuraniens). (auteurs)

  9. La catalyse d'épuration des gaz d'échappement automobiles. Situation actuelle et nouvelles orientations Catalytic Automotive Exhaust Gas Depollution. Present Status and New Trends

    Directory of Open Access Journals (Sweden)

    Prigent M.

    2006-11-01

    Full Text Available Cet article passe en revue les différents systèmes catalytiques de post-traitement utilisés actuellement sur la plupart des automobiles pour limiter leurs rejets de polluants. Les systèmes sont différenciés par leur mode de fonctionnement, le type de moteur à dépolluer (deux-temps, quatre-temps, diesel ou essence ou par leur mode de réalisation. Les nouvelles orientations, prévues pour respecter les futures réglementations antipollution, sont également décrites. On montre que certains véhicules prototypes, équipés de moteurs à combustion interne, sont capables d'avoir des émissions très proches de zéro tout comme les véhicules électriques. A review is made of the various types of exhaust gas aftertreatment systems presently used on most vehicles to reduce pollutant emissions. The systems are differentiated by their mode of action, according to the engine type to be depolluted (two-stroke, four-stroke, diesel or spark-ignition, and by their type of make-up. The major developments foreseen in the future, in view of compliance with the new legislations, are described. It is shown that some prototype vehicles with internal combustion engines are able to emit pollutant quantities really close to zero, such as electric cars.

  10. 24 CFR 3286.203 - Installation license required.

    Science.gov (United States)

    2010-04-01

    ... performance of the installation work in compliance with the requirements of this part. (3) A license is not required for individuals working as direct employees of a licensed installer or for the company that... and competent performance of all employees working under the licensed installer's supervision and for...

  11. 29 CFR 1910.306 - Specific purpose equipment and installations.

    Science.gov (United States)

    2010-07-01

    ...) Cranes and hoists. This paragraph applies to the installation of electric equipment and wiring used in..., and similar events. This paragraph covers the installation of portable wiring and equipment, including... 29 Labor 5 2010-07-01 2010-07-01 false Specific purpose equipment and installations. 1910.306...

  12. 14 CFR 25.1703 - Function and installation: EWIS.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Function and installation: EWIS. 25.1703... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Electrical Wiring Interconnection Systems (EWIS) § 25.1703 Function and installation: EWIS. (a) Each EWIS component installed in any area of the...

  13. Canberra Alpha Sentry Installation Functional Design Criteria (FDC)

    International Nuclear Information System (INIS)

    WHITE, W.F.

    1999-01-01

    This document provides the functional design criteria for the installation of the Canberra Alpha Sentry System at selected locations within the Plutonium Finishing Plant (PFP). The equipment being installed is identified by part number in Section 3 and the locations are given in Section 5. The design, procurement and installation are assigned to Fluor Federal Services

  14. 46 CFR 181.520 - Installation and location.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Installation and location. 181.520 Section 181.520... TONS) FIRE PROTECTION EQUIPMENT Portable Fire Extinguishers § 181.520 Installation and location... the space being protected. The installation and location must be to the satisfaction of the Officer in...

  15. Some suggestions based on the instrumentation installation experience at RAPP

    International Nuclear Information System (INIS)

    Raghunath, M.R.; Singh, S.; Jain, V.K.

    1977-01-01

    Suggestions regarding installation of reactor instrumentation have been made based on the instrumentation installation experience at the Rajasthan Atomic Power Plant. It has been mentioned that the instrumentation installation work has to proceed simultaneously with that of the heavy equipment and piping errection work, to meet the commissioning target dates. (S.K.K.)

  16. 49 CFR 192.193 - Valve installation in plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve...

  17. 49 CFR 192.321 - Installation of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Installation of plastic pipe. 192.321 Section 192... Transmission Lines and Mains § 192.321 Installation of plastic pipe. (a) Plastic pipe must be installed below ground level except as provided by paragraphs (g) and (h) of this section. (b) Plastic pipe that is...

  18. Installation package for a sunspot cascade solar water heating system

    Science.gov (United States)

    1980-01-01

    Solar water heating systems installed at Tempe, Arizona and San Diego, California are described. The systems consist of the following: collector, collector-tank water loop, solar tank, conventional tank, and controls. General guidelines which may be utilized in development of detailed installation plans and specifications are provided along with instruction on operation, maintenance, and installation of solar hot water systems.

  19. Installing fonts in LaTeX a user's experience

    NARCIS (Netherlands)

    Hanssen, F.T.Y.

    2003-01-01

    This paper presents a user's experience with installing fonts for use in LaTeX. It will be shown that it is not hard to make a standard Type 1 font work, if you use modern font installation software for LaTeX. All the steps necessary to install the example fonts will be shown. The example fonts used

  20. 32 CFR 634.25 - Installation traffic codes.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Installation traffic codes. 634.25 Section 634.25 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION Traffic Supervision § 634.25 Installation traffic codes. (a) Installation or activit...

  1. 46 CFR 119.430 - Engine exhaust pipe installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 119.430 Section 119... INSTALLATION Specific Machinery Requirements § 119.430 Engine exhaust pipe installation. (a) The design of all... an exhaust pipe. (b) Exhaust gas must not leak from the piping or any connections. The piping must be...

  2. Installation of beam screens in LHC arc cryomagnets

    CERN Document Server

    Cruikshank, P; Schneider, G; Veness, R J M

    1999-01-01

    Beam screens will be installed in the cold bores of the LHC arc cryodipoles and Short Straight Sections (SSS). This note describes the constraints on the beam screen installation imposed by the beam vacuum interconnects and Beam Position Monitors (BPM), and explains the installation scenario which has been adopted.

  3. An earth anchor system: installation and design guide.

    Science.gov (United States)

    R.L. Copstead; D.D. Studier

    1990-01-01

    A system for anchoring the guylines and skylines of cable yarding equipment is presented. A description of three types of tipping plate anchors is given. Descriptions of the installation equipment and methods specific to each type are given. Procedures for determining the correct number of anchors to install are included, as are guidelines for installing the anchors so...

  4. 24 CFR 3280.709 - Installation of appliances.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Installation of appliances. 3280... Fuel Burning Systems § 3280.709 Installation of appliances. (a) The installation of each appliance... the manufacturer's instructions attached to the appliance. Every appliance shall be secured in place...

  5. Installation of the backfill and plug test

    International Nuclear Information System (INIS)

    Gunnarsson, D.; Borgesson, L.; Hokmark, H.; Hohannesson, L.E.; Sanden, T.

    2003-01-01

    The Backfill and Plug Test is a full scale test of backfill material, backfilling technique and a tunnel plug. The main objectives of the Backfill and Plug Test are: - to develop and test different materials and compaction techniques for backfilling of tunnels excavated by blasting; - to test the function of the backfill and its interaction with the surrounding rock in a tunnel excavated by blasting; - to develop technique for building tunnel plugs and to test the function. The installation was made in the Swedish underground laboratory, Aspo HRL, during 1999. The inner part of the tunnel is not used for the test but was filled with drainage material. The test volume, which is about 28 m long, can be divided into the following three parts: - the inner part filled with backfill containing 30% bentonite; - the outer part filled with backfill without bentonite and bentonite blocks and pellets at the roof; - the plug. Permeable layers divide the test volume into 11 test sections. The permeable layers are used for increasing the water saturation rate in the backfill and for applying hydraulic gradients between the layers for studying the flow of water in the backfill and in the near field rock. The permeable layers were installed every 2.2 m and each layer is divided into three units in order to separately measure the flow close to the roof, in the central areas of the tunnel and close to the floor. The outer part ends with a wall of prefabricated concrete beams that were used for temporary support of the backfill during the casting of the plug. The upper volume close to the plug is filled with bentonite pellets and blocks consisting of 20% bentonite and 80% sand. The backfill is instrumented with 34 pore water pressure cells, 21 total pressure cells, 57 sensors for monitoring the water saturation and 13 gauges for measuring the local hydraulic conductivity. The water pressures in the permeable mats are measured in all sections. Four pressure cylinders, 2 in the roof

  6. Buffer protection in the installation phase

    International Nuclear Information System (INIS)

    Wimelius, Hans; Pusch, Roland

    2008-12-01

    The research and development of the design and construction of the SKB's repository for final disposal of spent reactor fuel is conducted along several paths ('lines'). Issues concerning the bedrock are dealt with in the 'rock line' and those related to buffer and backfill in deposition holes and tunnels are considered in the 'buffer line' and 'backfill line', respectively. These lines also deal with sub-activities that are coupled to several other lines. One of them includes development of techniques for protecting buffer blocks from moisture and water in the installation phase. Techniques and methods for placement and removal of the 'buffer protection sheet' are dealt with in the 'buffer line'. The removal is, however, considered as being part of the backfilling sequence. Since the performance of the sheet is of fundamental importance to the placement and function of the buffer it deserves particular attention. Thus, the removal of the rubber sheet that serves to protect the buffer blocks in the installation phase may be difficult and can cause significant problems that may require retrieval of already placed canister, buffer and backfill. These matters are in focus in the present report. Arrangements for protecting already placed buffer blocks from moist air and water have been tested in earlier large-scale experiments, i.e. the Prototype Repository project at Aespoe but the experience from them has called for more effective protection of the clay blocks as described in the present report. Focus is on the construction of foundation components at the bottom of the deposition holes required for establishing a tight seal between rock and buffer blocks, and on the protection sheet and arrangements for limiting water pressure on it. Special attention is paid to the drainage of the space between rock and protection sheet that is necessary for avoiding failure of the sheet and to systems for achieving this and for providing alarm signals if the allowed pressure is

  7. Buffer protection in the installation phase

    Energy Technology Data Exchange (ETDEWEB)

    Wimelius, Hans (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Pusch, Roland (Geodevelopment International AB, Lund (Sweden))

    2008-12-15

    The research and development of the design and construction of the SKB's repository for final disposal of spent reactor fuel is conducted along several paths ('lines'). Issues concerning the bedrock are dealt with in the 'rock line' and those related to buffer and backfill in deposition holes and tunnels are considered in the 'buffer line' and 'backfill line', respectively. These lines also deal with sub-activities that are coupled to several other lines. One of them includes development of techniques for protecting buffer blocks from moisture and water in the installation phase. Techniques and methods for placement and removal of the 'buffer protection sheet' are dealt with in the 'buffer line'. The removal is, however, considered as being part of the backfilling sequence. Since the performance of the sheet is of fundamental importance to the placement and function of the buffer it deserves particular attention. Thus, the removal of the rubber sheet that serves to protect the buffer blocks in the installation phase may be difficult and can cause significant problems that may require retrieval of already placed canister, buffer and backfill. These matters are in focus in the present report. Arrangements for protecting already placed buffer blocks from moist air and water have been tested in earlier large-scale experiments, i.e. the Prototype Repository project at Aespoe but the experience from them has called for more effective protection of the clay blocks as described in the present report. Focus is on the construction of foundation components at the bottom of the deposition holes required for establishing a tight seal between rock and buffer blocks, and on the protection sheet and arrangements for limiting water pressure on it. Special attention is paid to the drainage of the space between rock and protection sheet that is necessary for avoiding failure of the sheet and to systems for achieving

  8. Installation for analytic chemistry under irradiation; Installation de chimie analytique sous rayonnement

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, J; Azoeuf, P; Guillon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [French] L'installation a ete realisee pour effectuer des manipulations et des analyses chimiques sur des produits radioactifs. Elle est totalement telecommandee et se presente sous une forme lineaire de 15 metres de longueur et comporte trois zones: - une zone active d'appareillage, - une zone arriere d'intervention, - une zone avant independante des deux premieres et totalement protegee, ou s'operent les telecommandes de l'appareillage. L'ensemble a ete concu de facon a ce que chaque appareillage correspondant a une technique d'analyse soit implante dans une enceinte etanche. Les enceintes etanches sont reliees entre elles par un convoyeur. Apres trois annees de fonctionnement nous faisons le bilan et les critiques de l'installation. (auteurs)

  9. Importance of human factors on nuclear installations safety

    International Nuclear Information System (INIS)

    Caruso, G.J.

    1990-01-01

    Actually, installations safety and, in particular the nuclear installations infer a strong incidence in human factors related to the design and operation of such installations. In general, the experience aims to that the most important accidents have happened as result of the components' failures combination and human failures in the operation of safety systems. Human factors in the nuclear installations may be divided into two areas: economy and human reliability. Human factors treatments for the safety evaluation of the nuclear installations allow to diagnose the weak points of man-machine interaction. (Author) [es

  10. How Molecular Evolution Technologies can Provide Bespoke Industrial Enzymes: Application to Biofuels Comment les technologies d’évolution moléculaire peuvent fournir des enzymes industrielles sur mesure : application aux biocarburants

    Directory of Open Access Journals (Sweden)

    Fourage L.

    2013-08-01

    élioration de l’activité glucosidasique, après expression du gène codant pour la 3-glucosidase améliorée chez T. reesei et sécrétion du nouveau cocktail, permet une diminution d’un facteur 4 de la quantité de cocktail nécessaire à la saccharification d’une biomasse industrielle prétraitée (paille de blé.

  11. Safety Assessment in Installation of Precast Concrete

    Directory of Open Access Journals (Sweden)

    Yashrri S.N.

    2014-03-01

    Full Text Available This study was carried out to identify the safety aspects and the level of safety during the installation process in construction sites. A questionnaire survey and interviews were done to provide data on safety requirements in precast concrete construction. All of the interviews and the research questionnaire survey were conducted among contractors that are registered as class 1 to class 7 with the Construction Industry Development Board (CIDB and class A to class G with Pusat Khidmat Kontraktor (PKK in Penang. Returned questionnaires were analysed with the use of simple percentages and the Likert Scale analysis method to identify safety aspects of precast construction. The results indicate that the safety aspect implemented by companies involved in the precast construction process is at a good level in the safety aspect during bracing, propping, welding and grouting processes and at a very good level of safety in general aspects and safety aspects during lifting processes.

  12. Nuclear Plant Analyzer: Installation manual. Volume 1

    International Nuclear Information System (INIS)

    Snider, D.M.; Wagner, K.L.; Grush, W.H.; Jones, K.R.

    1995-01-01

    This report contains the installation instructions for the Nuclear Plant Analyzer (NPA) System. The NPA System consists of the Computer Visual System (CVS) program, the NPA libraries, the associated utility programs. The NPA was developed at the Idaho National Engineering Laboratory under the sponsorship of the US Nuclear Regulatory Commission to provide a highly flexible graphical user interface for displaying the results of these analysis codes. The NPA also provides the user with a convenient means of interactively controlling the host program through user-defined pop-up menus. The NPA was designed to serve primarily as an analysis tool. After a brief introduction to the Computer Visual System and the NPA, an analyst can quickly create a simple picture or set of pictures to aide in the study of a particular phenomenon. These pictures can range from simple collections of square boxes and straight lines to complex representations of emergency response information displays

  13. Safety of nuclear installations. An international comparison

    International Nuclear Information System (INIS)

    Renner, Andrea; Diwes, Andreas; Reingardt, Martin

    2010-01-01

    Safeguarding of nuclear power plants against disruptive actions or other external hazards is part of the plant design and presumption of an operation license. The general principle is defense in depth involving different security zones with separate barriers. The safeguards for nuclear installations are organized in three areas of responsibility: governmental measures (police, military), technical (detectors, scanners, illuminations, camera tracking, concrete barriers) and personnel measures (access control, security personnel, alarm) of the operating company. International responsibilities results from the treaty on the non-proliferation of nuclear weapons and several IAEA documents. The authors discuss the national regulations in Germany, Switzerland, United Kingdom and USA. Older NPPs that are not in compliance with actual safety standards will be a topic of increasing importance.

  14. Safety installation for preventing pollution by pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Wittgenstein, G F

    1972-10-25

    A safety installation for preventing pollution by pipelines, particularly those used for transporting liquid hydrocarbons, is described. It is applicable to any pipeline, but particularly to underground or submarine pipelines, whether made of steel, plastics, or any other material. The 4 essential objects of the invention are to insure reliable prevention of pollution of the environment due to leakage of a hydrocarbon through cracks in the pipe; to evacuate the leakage flow without delay to a vessel; to signal almost instantaneously the existence of a leak; and to effect remote control of operations by which the dynamic pressure in the pipe is cancelled. Each equipped section consists of a fluid-type jacket of plastic material which surrounds the pipe, which at its ends is sealed off. It is these seals which delimit the sections. (7 claims)

  15. ACP Facility Safety Surveillance System Installation

    International Nuclear Information System (INIS)

    You, Gil Sung; Kook, D. H.; Choung, W. M.; Ku, J. H.; Cho, I. J.; You, G. S.; Kwon, K. C.; Lee, W. K.; Lee, E. P.

    2006-10-01

    The Advanced spent fuel Conditioning Process is under development for effective management of spent fuel by converting UO 2 into U-metal. For demonstration of this process, α-γ type new hotcell was built in the IMEF basement. All facilities which treat radioactive materials must manage CCTV system which is under control of Health Physics department. Three main points (including hotcell rear door area) have each camera, but operators who are in charge of facility management need to check the safety of the facility immediately through the network in his office. This needs introduce additional network cameras installation and this new surveillance system is expected to update the whole safety control ability with existing system

  16. A tangible digital installation in the classroom

    DEFF Research Database (Denmark)

    Marchetti, Emanuela; Valente, Andrea

    2015-01-01

    This paper describes a three weeks study involving 15 children affected by autism spectrum disorders (9-12 years old) in a primary Danish school. The aim of the study was to support the class teachers in assessing the benefits of game-based learning with respect to their main two challenges......: facilitating the emergence of imagination and conceptual thinking, and managing the interplay between cooperation and competition. This cooperation originates from one of the teachers’ interest in MicroCulture, a digital and tangible installation earlier created by the authors and aimed at bridging history...... learning across museums and schools. The design of MicroCulture focused on urban development seen as a social process; in order to cover children’s multiple play modalities and support their interaction with guides and teachers, MicroCulture offers exploratory gameplay, with no predefined final goal...

  17. Conventional radiology: fixed installations in medical environment

    International Nuclear Information System (INIS)

    2010-01-01

    This document presents the different procedures, the different types of specific hazards, the analysis of risks, their assessment and the preventive methods with regard to radioprotection in the case of fixed conventional radiology equipment in medical environment. It indicates and describes the concerned personnel, the course of procedures, the hazards, the identification of the risk associated with ionizing radiation, the risk assessment and the determination of exposure levels (definition of regulated areas, personnel categories), the strategy aimed at controlling the risk (risk reduction, technical measures concerning the installation or the personnel, teaching and information, prevention, incident), the different measures of medical monitoring, the assessment of risk control, and other risks. An appendix proposes an example of workstation assessment

  18. Survey of medical radium installations in Wisconsin

    International Nuclear Information System (INIS)

    Tapert, A.C.; Lea, W.L.

    1975-05-01

    A radiation protection survey was performed at 70 medical radium installations in the State of Wisconsin. The requirements of the State's Radiation Protection Code were used as survey criteria. Radiation measurements of radium storage containers, radium capsule leakage tests, and monitoring of work surfaces for contamination were performed. Film badge monitoring data of whole body and extremity doses are presented for 221 individuals at 17 hospitals. Whole body doses during single treatments ranged from 10 to 1360 mrems per individual. The estimate of 500 mrems per treatment was determined as the dose aggregate to hospital personnel. Whole body doses from film badges are compared with analogous TLD doses. Four physicians and six technicians at nine hospitals participated in a study for monitoring the extremities with TLD. Cumulative extremity doses ranged from 28 to 6628 mrems per participant during the study. (U.S.)

  19. Designing performativity for mixed reality installations

    Directory of Open Access Journals (Sweden)

    Andrew Morrison

    2010-07-01

    Full Text Available This article takes up the concept of performativity prevalent in the humanities and applies it to the design of installation arts in mixed reality mode. Based on the design, development and public access to two specific works, the concept is related to a form of research by design. We argue that the concept of performativity may be further usefully employed in investigations (design and research, artistic and public into digital arts where complex intersections between concepts, technologies, dramaturgy, media and participant actions are in flux and together constitute the emergence and experience of a work. Theories of performativity are related to these two works in an argument that further suggests there is room in research by design to also include ‘performative design’. The article is the result of a wide-ranging interdisciplinary collaboration and aims to convey some sense of that in its reporting style, content and analysis.

  20. New electricity generating installations - Czech experience

    International Nuclear Information System (INIS)

    Biza, K.; Pazdera, F.; Zdarek, J.

    2004-01-01

    Economically and technically are analysed alternatives for new electricity generation installations (GEN 111+ NPPs, finalization of NPPs under construction, lifetime extension of existing NPPs, coal plants and gas plants). Described are experienced with NPP Temelin (lessons learned from its design, construction, start-up and resent operation and service experience) and new Czech Energy Policy, where the nuclear energy is an important source for electricity generation. Discussed is also impact of potential trading with CO 2 limits and strategy on minimization of dependence on energy from politically unstable regions. Underlined is important role of preparation of young generation for safe and reliable long term operation of NPPs. General recommendation is to orient on finalization of NPPs under construction, lifetime extension of existing NPPs and long term orientation on new generation of NPPs (GEN III+ and GEN IV). (author)

  1. NBS-LANL RTM injector installation

    International Nuclear Information System (INIS)

    Wilson, M.A.; Ayres, R.L.; Cutler, R.I.; Lindstrom, E.R.; Martin, E.R.; Mohr, D.L.; Penner, S.; Yoder, N.R.; Young, L.M.

    1983-01-01

    The injector for the NBS-LANL CW racetrack microtron consists of a 100 KeV electron gun and beam transport line followed by a 5 MeV linac. The function of the gun and transport line, which have been installed at NBS, is to provide a chopped and bunched 100 KeV and up to 0.67 mA dc or pulsed beam of very low transverse emittance for matched insertion into the linac. In this paper the authors present both the design and construction details of the 100 KeV system and the results of preliminary beam tests. The tests conducted thus far show the gun and transport system to be performing well within design specifications

  2. Installation for low temperature vapor explosion experiment

    International Nuclear Information System (INIS)

    Nilsuwankosit, Sunchai; Archakositt, Urith

    2000-01-01

    A preparation for the experiment on the low temperature vapor explosion was planned at the department of Nuclear Technology, Chulalongkorn University, Thailand. The objective of the experiment was to simulate the interaction between the molten fuel and the volatile cooling liquid without resorting to the high temperature. The experiment was expected to involve the injection of the liquid material at a moderate temperature into the liquid material with the very low boiling temperature in order to observe the level of the pressurization as a function of the temperatures and masses of the applied materials. For this purpose, the liquid nitrogen and the water were chosen as the coolant and the injected material for this experiment. Due to the size of the installation and the scale of the interaction, only lumped effect of various parameters on the explosion was expected from the experiment at this initial stage. (author)

  3. Gas heat pump installation at Paderborn

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    A gas heat pump installation at the swimming pool and sport center in Paderborn, developed by Ruhrgas A.G. has a heat capacity of 4650 kW, the largest up to this time and recovers heat from ground water under the sport center, shower, and swimming pool effluent, and air exhausted from the swimming pool to provide 182% of the energy obtained from the natural gas alone. This compares with an 80% efficiency for a conventional boiler fired with natural gas. Natural gas consumption by the sport center has been reduced from 1.2 million m/sup 3/ y to 520,000 m/sup 3//y, a 56% savings. Three identical units each have an eight-cylinder, four-cycle, 253 kW-gas engine.

  4. Testing installation for a steam generator

    International Nuclear Information System (INIS)

    Dubourg, M.

    1985-01-01

    The invention proposes a testing installation for a steam generator associated to a boiler, comprising a testing exchanger connected to a feeding circuit in secondary fluid and to a circuit to release the steam produced, and comprising a heating-tube bundle connected to a closed circuit of circulation of a primary coolant at the same temperature and at the pressure than the primary fluid. The heating-tube bundle of the testing exchanger has the same height than the primary bundle of the steam generator and the testing exchanger is at the same level and near the steam generator and is fed by the same secondary fluid such as it is subject to the same operation phases during a long period. The in - vention applies, more particularly, to the steam generators of pressurized water nuclear power plants [fr

  5. Skin: an interactive hyperstereoscopic electro installation

    Science.gov (United States)

    Kostis, Helen-Nicole; Kooima, Robert; Kannenberg, John

    2007-02-01

    It is the uniqueness of Virtual Reality as a medium that calls for the creation of hybrid realities which blur the finite boundaries between physical and digital existence. Virtual Reality's distinguishing features as an artistic medium embody a distinct form of aesthetics: it is a stereoscopic, immersive, interactive, performative, dynamic, and experiential medium. A Virtual Reality art piece manifests in multiple ways. It can present itself as an interactive virtual archetype, exploring concepts rendered from different perspectives, and as an impetus to challenge the platform's capabilities, not only theoretically as an artistic practice, but also by calling for the instantiation of authoring tools for the development of virtual reality experiences. The paradigm presented in this paper is a Virtual Reality art piece, called skin, 2006, developed on Electro, which is an open-source cross-platform development environment. skin, 2006, is an interactive hypersteroscopic high-definition audiovisual installation that explores a dialogue between physical and digital senses of "touch".

  6. Installation of an isotope separator in Debrecen

    International Nuclear Information System (INIS)

    Gacsi, Z.; Gulyas, J.; Vitez, A.; Csige, L.; Krasznahorkay, A.

    2005-01-01

    Complete text of publication follows. An isotope separator named OSIRIS was decommissioned in Studsvik, Sweden last July. Researchers there offered this equipment to us for dismantling and moving it over to ATOMKI in Debrecen for installation at the cyclotron lab and save and use it in nuclear physics and other sciences where stable and radioactive isotopes are used extensively for fundamental and applied research. Since the separator was used to separate radioactive isotopes, the ion source with its beam extracting, shaping, and transporting accessories, as well as the lining inside the bending magnet, furthermore the beam diagnostic and shaping elements in the 'switchyard' part of the separator had to stay in Studsvik because of the high radioactive contamination. In order to operate this equipment, first we have to design and manufacture these parts together with a new endstation for the collection and handling of the separated isotopes. Parallel with the installation, we also concentrate on different applications of an isotope separator, including separation of stable isotopes for labelling special compounds used in many branches of sciences, medical care, and industry, and on studying single ion implantation possibilities, as well as on the production of special targets for nuclear physics research. First we want to separate stable isotopes, and then, when we overcome all technical pitfalls, we will consider using this equipment to separate radioactive isotopes as well. Our intention is to have this equipment available to anyone at ATOMKI and elsewhere interested in using its capabilities in their own research fields. Consequently, all comments, suggestion, and ideas are welcome now and continuously, since the design and manufacture of parts can then be oriented by taking into account all the suggestions as much as possible. (author)

  7. Lessons learned from installation of an environmental horizontal well

    International Nuclear Information System (INIS)

    Oakley, D.B.; Nickelson, M.D.

    1994-01-01

    At Williams Air Force Base near Phoenix, Arizona, a Pilot Study/Demonstration Study is being performed to evaluate the effectiveness of horizontal vs vertical wells in remediating and containing a jet fuel contaminant plume. An early stage of this project included successful installation of the world's longest, deepest environmental horizontal well. The horizontal well was installed using river crossing technology developed for drilling boreholes and installing utility conduits under rivers. Boreholes more than 5,000 ft. long have been successfully installed using river crossing technology. However, these boreholes are typically shallower than 100 ft. below land surface. Installation of the environment horizontal well proved to be extremely challenging because of the depth, the length of the borehole, and the requirements dictated by well installation criteria. Two installation attempts failed before the successful installation. The first installation attempt failed during well material installation. The second attempt resulted in the drill string becoming permanently stuck and abandoned downhole. The history of the two failed and one successful installation attempts demonstrates several lessons learned, including (1) streamline the well materials installation process as much as possible; (2) guar-gum-based drilling muds do not have the gel strength to remove sufficient cuttings from deep boreholes; (3) if sandpack around the well screen is required, a prepack screen should be installed--avoid using tremie pipes for installing a sandpack; (4) drill string location information provided by surface magnetic systems is unreliable at 150 ft. or more bls; and (5) for difficult drilling conditions, 24 hr./day drilling is recommended

  8. La ruée vers l’or. Nouveaux écrans, nouvelles recettes ?

    Directory of Open Access Journals (Sweden)

    Joël Augros

    2012-06-01

    Full Text Available Autrefois assises sur l’unique marché des salles, les sources des recettes du cinéma se sont multipliées à l’apparition de nouveaux écrans (télévision, vidéo pour adopter un mode séquentiel (les fenêtres de diffusion. Après une certaine stabilisation dans les années 80, l’arrivée sur le marché d’autres écrans (internet, écrans portables met à mal en France et aux Etats-Unis la périodisation installée. Alors qu’en France, le mode de financement du cinéma et la place cruciale de Canal Plus dans les recettes du cinéma conduisent à un raccourcissement de la séquence sans que les professionnels n’envisagent une disparition du modèle, aux Etats-Unis, le déclin du marché vidéo met à l’ordre du jour une abolition pure et simple du séquençage. Les compagnies indépendantes notamment expérimentent de façon croissante les sorties de films sur tous les écrans disponibles sous l’œil intéressé des majors, prêtes à adopter le modèle s’il s’avère pertinent.Stemming ab initio exclusively from the theatre box-office, revenues of films diversified when television and video became alternative ways of screening movies. Thus, a business model was established and stabilized in the 1980s along screening windows. The digital revolution broke this business model in France as well as in the United States. However, while in France, the film investment schemes and Canal Plus Group’s established position as a major source of finance led to the shortening of release windows but not to the disappearance of the release windows format, in the United States, the declining DVD sales and revenues forced the major studios to study new methods of distribution and new business models, based on day-and-date releases and on the gradual dissolution of the windows model. The major companies have been carefully watching the independent film companies experimentations with release windows ready to adopt this new business model if

  9. Breast cancer risk and residence near industry or traffic in Nassau and Suffolk Counties, Long Island, New York; Risque de cancer du sein a proximite d'installations industrielles ou du trafic routier dans les comtes de Nassau et de Suffolk (Long Island, New York)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis-Michl, E.L.; Melius, J.M.; Kallenbach, L.R.; Ju, C.L.; Talbot, T.O.; Orr, M.F.; Lauridsen, P.E.

    1999-06-01

    The objectives of the study is the influence of the vicinity of an industrial area or an important road traffic, on the risk increase of a breast cancer. The results show a relation between the breast cancer for women after the menopause and a life near chemical industrial area.

  10. Certificate of fitness for the handling of industrial radiological devices - CAMARI. 2010 annual status. Organization, results and perspectives; Certificat d'aptitude a la manipulation des appareils de radiologie industrielle - CAMARI. Bilan annuel 2010. Organisation, resultats et perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Le Dirac' h, B.; Vidal, J.P.

    2011-09-26

    Since July 2008, IRSN organizes the tests of the Camari (license for using in France radiological installations for industry). This report by reminding the modalities of the examination organized by IRSN, supplies a synthesis of the results obtained by the candidates in 2010 and reviews the role of the training institutions which prepare the candidates for the examination. It also draws up the balance sheet over the period 2008-2010 and proposes axes of improvement of the modalities of the examination. (authors)

  11. Topo-Iberia GPS network: installation complete

    Science.gov (United States)

    Khazaradze, G.

    2009-04-01

    As part of the project, titled "Geociencias en Iberia: Estudios integrados de topografía y evolución 4D: Topo-Iberia", we have established a network of 26 continuous GPS stations, covering the Spanish part of the Iberian Peninsula (22 stations) and Morocco (4 stations). A major objective behind the establishment of this array is to monitor millimeter level deformation of the crust due to the collision of African and Eurasian (including Iberian) tectonic plates. More specific goals of the project include the identification of the areas and/or specific seismic faults which exhibit higher deformation rates, which could imply an increased seismic hazard in these specific areas. The network has been designed as two X-shaped transects crossing the peninsula from NE to SW and NW to SE, with relatively coarse distribution of the stations, superimposed with denser coverage in the seismically active areas of the Betics, Pyrenees and Cantabrian chains. The majority of the built monuments consist of 1.5-1.8 m tall concrete pillars of 40 cm in diameter anchored to the bedrock using iron rebars. One station in Huesca was built according the UNAVCO's short drilled braced monument (SDBM) specifications. All the monuments were equipped with the SCIGN leveling mounts to ensure the precise antenna alignment and re-alignment in case of the antenna replacement, as well as, tamper resistance of the monument mark. In places were the snow accumulation was possible the antennas were covered with plastic radomes. The instrumentation used is Trimble NetRS dual-frequency receivers with choke-ring antennas. The communication is mainly via cellular telephone system. As of December 2008, the network installation has been competed and all the stations are fully operational. Here we report the milestones of the installation of the network and, as well as, present the first preliminary results of the analysis of the data. Besides the newly established Topo-Iberia CGPS stations, we have included

  12. High-Volume Non-Destructive Test Applications at the Hanford Atomic Products Operation; Applications Industrielles des Essais Non Destructifs a l'Etablissement Nucleaire de Hanford; Provedenie bol'shogo chisla nedestruktivnykh ispytanii v ''khenford atomik prodakts opereishen''; Ensayos No Destructivos en Gran Escala Aplicados en Hanford

    Energy Technology Data Exchange (ETDEWEB)

    Worlton, D. C. [Pacific Northwest Laboratory, Battelle Memorial Institute, Richland, WA (United States)

    1965-10-15

    patterns whose size and shape reveal defect magnitude, location within the tube wall, and depth. Probe wobble and harmless tube kinks and bends are plotted with a characteristic pattern readily distinguishable from genuine defects. Results of applying the test to 750 000 ft of installed tubing under difficult field conditions are summarized. (author) [French] On a recours a des essais non destructifs - rapides, surs et automatiques - pour assurer la securite et l'efficacite des operations critiques a Hanford. On utilise couramment des methodes de controle tres sensibles, fondees sur les courants de Foucault et les ultrasons, pour verifier avec le maximum d'assurance et dans le minimum de temps la qualite d'importants volumes de matieres et produits. Le memoire decrit les appareils de controle utilises pour s'assurer de la qualife de la fabrication des combustibles nucleaires a Hanford. Ces appareils, qui font partie integrante de l'equipement de fabrication, appliquent le principe de l'attenuation des ondes ultrasonores pour controler la structure granulaire de barreaux d'uranium non gaine, les ultrasons et les courants de Foucault pour controler la liaison entre l'uranium et sa gaine en aluminium ainsi que l'epaisseur de cette derniere (1 mm), et une nouvelle methode ultrasonore (large bande, haute resolution) pour la detection des defauts dans les soudures aux extremites des cartouches de combustible. Des methodes combinees (courants de Foucault et ultrasons) sont appliquees simultanement pour l'inspection complete d'un element combustible en neuf secondes; les elements defectueux sont rejetes automatiquement. Le memoire expose en detail les methodes ultrasonores perfectionnees pour le controle des gaines de combustible a parois minces. Des traducteurs speciaux a forte focalisation sont utilises avec un circuit a bande large pour produire des ondes de rotation pures dans un tube de 0,37 mm d'epaisseur. Les ondes de Lamb et autres mouvements ondulatoires complexes sont

  13. Demonstrate Energy Component of the Installation Master Plan Using Net Zero Installation Virtual Testbed

    Science.gov (United States)

    2015-09-01

    compliant GIS, usually obtained from the installation itself. NZP also includes an appropriate weather file for the location selected, using the closest...such as solar photovoltaics, solar-thermal, wind energy, biomass (wood chips, etc.), biogas , or synthetic gas need to be considered as part of the mix...have better information. In some cases, such as photovoltaics, users can obtain data from an online system and enter it into NZP. In this case, users

  14. Le décodage biologique. Diffusion d’une nouvelle médecine non-conventionnelle contre le cancer Biodecoding. Dissemination of a New Unconventional Therapy against Cancer

    Directory of Open Access Journals (Sweden)

    Aline Sarradon-Eck

    2011-05-01

    Full Text Available De nouvelles médecines alternatives, regroupées sous l’appellation « décodage biologique », reposent sur une conception psychosomatique du cancer. Elles sont apparues en Europe dans les années 1990. Dans une perspective critique, l’article tente de comprendre la diffusion de ces nouvelles thérapies. S’inspirant du travail de D. Fassin sur les réseaux de l’ethnopsychiatrie, il analyse la construction d’une légitimation du décodage biologique et de ses praticiens, en décrivant les réseaux qui diffusent les théories et favorisent l’adoption de la pratique. L’article montre l’enracinement de ces nouvelles thérapies dans des représentations sociales et des modèles culturels de l’étiologie du cancer et du “faire face” à la maladie qui permettent ou renforcent l’adoption et l’appropriation de la pensée psychosomatique alternative.New alternative therapy called « bio-decoding » based on a psychosomatic perception of cancer appeared in the 1990s. Using a critical approach, the article aims to understand the therapy’s growth. Drawing on D. Fassin’s work about ethnopsychiatric networks, this paper analyses the construction of bio-decoding and bio-therapist legitimacy, by unravelling the networks which allow for theory dissemination and enable the practice’s growth. The article shows that these new therapies are deeply rooted in social and cultural models of cancer etiology and coping, which allow or reinforce approval and appropriation of alternative psychosomatic thought.

  15. Nuclear installations inspectorate a public opinion survey

    International Nuclear Information System (INIS)

    Lennie, S.E.; Davies, A.G.

    2001-01-01

    HM Nuclear Installations Inspectorate (HMNII) is the regulator responsible for the safety of licensed nuclear sites in the UK. Recognizing the need for public approval on future policy with respect to nuclear waste management, the NII commissioned a public opinion research programme amongst the UK general public. Opinion was sought on a number of issues including attitudes towards the industry in general, perception of nuclear waste and its management, tolerability of risk and attitudes towards current decommissioning plans. In response to the primary objectives of the survey the main findings are: current spontaneous level of concern over the industry in general is low (7%), and lower still for nuclear waste (3%). However, on prompting, 47% of respondents were very concerned about nuclear waste. Top of mind issues of concern about the industry are: nuclear waste; risk of accidents; health risks. Personal risk from nuclear waste is not of overt concern and is significantly less worrisome to respondents than risk from diseases like meningitis or cancer, smoking or road accidents. On being presented with a statement describing current UK decommissioning plans, the sample was generally in favour. However, this issue will require further research. (authors)

  16. Installation of the sag compensator for HANARO

    International Nuclear Information System (INIS)

    Kim, Hyungkyoo; Jung, Hoansung; Lim, Incheol; Ahn, Gukhoon

    2008-01-01

    Electric power is essential for all industrial plants and also for nuclear facilities. HANARO is a research reactor which produces a 30 MW thermal power. HANARO is designed to be tripped automatically when interruptions or some extent of sags occur. HANARO has the reactor regulation system(RRS) and reactor protection system(RPS). HANARO is designed so as to be tripped automatically by insertion of control absorber rods(CAR) and shut-off rods(SOR). When voltage sag or momentary interruption occurs, the reactor has an unwanted trip by insertion of CARs and SORs even though the process systems are still in operation. HANARO was experienced in a nuisance trip as often as the unexpected voltage sag and/or momentary interruption occurs. We installed the voltage sag compensator on the power supply for CARs and SORs so as to prevent an unwanted trip. We undertook voltage sag assessment of the AC coil contactor which is a component of the power supply unit for the SORs. The compensation time is determined to be less than 1 sec in consideration of the reactor safety. This paper is concerned with the impact of the momentary interruption on the reactor and the effect of the voltage sag compensator. (author)

  17. Tilecal towards the Installation at Cruise Speed

    CERN Multimedia

    Miralles, Ll

    Over the last month the Tile Calorimeter has made a major step in its way towards its assembly in ATLAS. Late February the final EndCap supports were installed and the load (200 Tn) transferred from the assembly cradle to the supports. By mid-March, 32 Endcap modules, 50% of the total with a weight of 350 Tn were pre-assembled in bldg. 185 at CERN. At this stage the assembly is inside its geometrical envelope and the tooling and procedures have been developed. The ATLAS Tile Calorimeter is composed of 3 cylinders ("barrels") of steel, scintillating tiles and optical fibers, altogether about 12 m long, with an outer diameter of 8.4 m, inner diameter of 4.5 m and weighing about 2800 tons. The central cavity will contain the Liquid Argon cryostats, and the whole calorimetry system will measure the direction and energy of jets produced at the LHC, as well as the missing transverse energy, which - as everyone knows - is one of the telltale signals of new and exciting physics. Each of the three cylinders is divid...

  18. CFPL installs products pipeline with directional drilling

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Central Florida Pipeline Company (CFPL), a subsidiary of GATX Terminals Corp., Tampa, FL, has used directional drilling under seven water bodies in Hillsborough, Polk and Osceola Counties in constructing its new pipeline from Tampa to Orlando. Primary reason for using directional drilling is to protect the environment by minimizing water turbidity while the 16-inch diameter, 109-mile refined petroleum products pipeline is being installed. Total cost of the project is pegged at $68.5 million. Directional drilling enabled the pipe to be placed about 20 feet below the bottom of: The Alafia River in Riverview with 999 feet drilled; Port Sutton Channel near the Port of Tampa with 2,756 feet drilled; Reedy Creek Swamp at the intersection of Interstate 4 and Highway 192 which had 1,111 feet drilled; Wetland number-sign 70 southwest of Lake Wales with 1,575 feet drilled; Peace River south of Bartow had 2,470 feet drilled; Bonnet Creek west of Kissimmee had 693 feet drilled. Shingle Creek near the borders of Osceola and Orange Counties with 1,700 feet drilled. This paper reviews the design plans for construction and the emergency response plans should a rupture occur in the line

  19. Installation of the sag compensator for HANARO

    International Nuclear Information System (INIS)

    Kim, H. K.; Jung, H. S.; Ahn, G. H.; Lim, I. C.

    2008-01-01

    Electric power is essential for all industrial plants and also for nuclear facilities. HANARO is a research reactor which produces a 30MW thermal power. HANARO is designed to be tripped automatically when interruptions or some extents of sags occur. HANARO has the reactor regulation system (RRS) and reactor protection system (RPS). HANARO is designed so as to tripped automatically by insertion of control absorber rods (CAR) and shut-off rods (SOR). When voltage or momentary interruption occurs, the reactor has an unwanted trip by insertion of CARs and SORs even though the process systems are still in operation. HANARO was experienced in a nuisance trip as often as the unexpected voltage sag and/or momentary interruption occurs. We installed the voltage sag compensator on the power supply for CARs and SORs so as to prevent an unwanted trip. We undertook voltage sag assessment of the AC coil contactor which is a component of the power supply unit for the SORs. The compensation time is determined to be less than 1 sec in consideration of the reactor safety. This paper is concerned with the impact of the momentary interruption on the reactor and the effect of the voltage sag compensator

  20. Renewable energy sources and nuclear installations

    International Nuclear Information System (INIS)

    Hirschberg, S.; Bauer, Ch.; Burgherr, P.; Stucki, S.; Vogel, F.; Biollaz, S.; Schulz, T.; Durisch, W.; Hardegger, P.; Foskolos, K.; Meier, A.; Schenler, W.

    2005-02-01

    This comprehensive work report for the Swiss Federal Office of Energy (SFOE) made by the Paul Scherrer Institute PSI takes a look at work done in connection with the updating of the office's Energy Perspectives. In particular, the topic of electricity is reviewed in the light of pending important decisions in the area of nuclear energy and the newer renewable sources of energy. The report makes an attempt to estimate the effect on Swiss power production that the new renewables and new nuclear installations could have in the next 30-40 years and to what costs this could be done and which obstacles would have to overcome. The renewable energy sources include small hydro, wind, photovoltaics, solar thermal power plants, biogas, geothermal energy, wave-power and solar chemistry. The methods used include literature study and contacts with internal PSI experts on the various areas involved. The most important system characteristics were noted and learning curves for the various technologies were taken into account. Ecological and social factors were also considered

  1. Solid targetry at the TESLA Accelerator Installation

    CERN Document Server

    Comor, J J; Rajcevic, M; Kosutic, D; Spasic, M; Vidovic, A; Duricic, J; Nedeljkovic, N

    2002-01-01

    According to the concept of the TESLA Accelerator Installation, the channel for production of radioisotopes has to routinely produce sup 2 sup 0 sup 1 Tl, sup 1 sup 1 sup 1 In, sup 6 sup 7 Ga, sup 1 sup 2 sup 3 I and sup 1 sup 8 F, and a number of other radionuclides for experimental purposes. The production of sup 1 sup 2 sup 3 I and sup 1 sup 8 F will be performed in dedicated, commercial target stations, while a versatile solid target irradiation system is designed for the routine and experimental production of all other radioisotopes. The solid target station is designed to accept targets for both the 7 deg. and 90 deg. irradiation geometry. The targets used for the routine production will be prepared by electroplating on a silver substrate. They can be irradiated with a 1.5 kW beam using the 7 deg. geometry. The cooling of these targets is enhanced by fins on the back of the silver substrate designed so that the highest temperature on the surface of the target does not exceed 110 deg. C. The irradiation ...

  2. Installation of the sag compensator for HANARO

    International Nuclear Information System (INIS)

    Kim, Hyung Kyoo; Jung, Hoan Sung; Lim, In Cheol; Ahn, Guk Hoon

    2008-01-01

    Electric power is essential for all industrial plants and also for nuclear facilities. HANARO is a research reactor which produces a 30MW thermal power. HANARO is designed to be tripped automatically when interruptions or some extent of sags occur. HANARO has the reactor regulation system(RRs) and reactor protection system(RPS). HANARO is designed so as to be tripped automatically by insertion of control absorber rods(CAR) and shut off rods(SOR). When voltage sag or momentary interruption occurs, the reactor has an unwanted trip by insertion of CARs and SORs even though the process systems are still in operation. HANARO was experienced in a nuisance trip as often as the unexpected voltage sag and/or momentary interruption occurs. We installed the voltage sag compensator voltage sag assessment of the AC coil contactor which is a component of the power supply unit for the SORs. The compensation time is determined to be less than 1 sec in consideration of the reactor safety. This paper is concerned with the impact of the momentary interruption on the reactor and the effect of the voltage sag compensator

  3. Installation of a second trip system

    International Nuclear Information System (INIS)

    Bessada, E.

    1997-01-01

    Since its first criticality in 1957, the NRU reactor has been operating safely and efficiently supporting the CANDU reactor's research and development programs and producing radioisotopes for medical use. To ensure that the reactor continues to operate safely and effectively, Atomic Energy of Canada Limited (AECL) commissioned a team in 1989 to conduct a systematic review and assessment of the reactor condition. The outcome of the study indicated that the overall condition of the reactor is good and that it is being operated safely. The study also produced recommendations as to where safety can be improved. These recommendations are the basis of the upgrade program currently being implemented in the reactor. The Second Trip System (STS) is part of the upgrade program. It is a stand alone seismically qualified trip system that operates independently from the existing first trip system (FST) to shutdown the reactor. This paper discusses the design, installation and the inactive commissioning of the system, and the process used to ensure that the system can be retrofitted to the reactor without affecting its safety or its operational requirements. (author)

  4. Evaluation of photovoltaic installations performances in Sardinia

    International Nuclear Information System (INIS)

    Ghiani, Emilio; Pilo, Fabrizio; Cossu, Silvestro

    2013-01-01

    Highlights: • One year measurement and performance analysis of grid connected PV power plants. • The analysis of the whole energetic PV transformation chain is presented. • Ambient parameters monitored and compared with the ones available in literature. • Monthly variability of the performance ratio and its correlation with temperature. • Range of variation of performance ratio in plants grouped by typology. - Abstract: This paper aims at providing a performance analysis of a grid connected photovoltaic power plant in Sardinia by investigating on the effective performance ratio of PV installations, with a critical analysis of the whole energetic transformation chain, starting from the incident solar energy, to the DC energy output from the modules and AC energy output from the inverter and transformer. The parameters that can influence the energy production are analyzed in order to find out the critical points in the optimization of the PV system design process. One year measurement and performance analysis of two real-life grid connected PV power plants are presented in the paper, providing up-to-date measurement data, useful to compare the effective energy production of PV plants positioned in different areas of the world. Monthly variability of the performance ratio and its correlation with ambient temperature is also discussed in the paper

  5. Adoption et retombées d'une nouvelle technologie de dépistage des infections à ERV en contexte hospitalier québécois

    OpenAIRE

    Attieh, Randa

    2015-01-01

    La « Polymerase Chain Reaction» (PCR) est une technologie moléculaire qui se veut performante pour détecter les entérocoques résistants à la vancomycine (ERV) en contexte hospitalier. La traduction de cette technologie dans les pratiques professionnelles des acteurs est conceptualisée comme un processus d’adaptation et d’ajustements des rôles entre la technologie et le milieu hospitalier. Par souci de mieux comprendre la traduction de la nouvelle technologie de dépistage PCR dans les pratique...

  6. Preliminary project of installation for separation tubes tests-ITTS

    International Nuclear Information System (INIS)

    Rocha, Z.

    1984-01-01

    A consolidation of actual ideas about installation, entitled ''Installation to separation tubes tests-ITTS'', expected to CDTN is presented. The project bases, the testing to be realized, the procedures to be obeyed during the operation, the components and the space required by installation and auxiliary equipments, the presumable origin of components (nacional and international), including a preliminary list of building and operation costs are described. (author) [pt

  7. Advanced Measuring (Instrumentation Methods for Nuclear Installations: A Review

    Directory of Open Access Journals (Sweden)

    Wang Qiu-kuan

    2012-01-01

    Full Text Available The nuclear technology has been widely used in the world. The research of measurement in nuclear installations involves many aspects, such as nuclear reactors, nuclear fuel cycle, safety and security, nuclear accident, after action, analysis, and environmental applications. In last decades, many advanced measuring devices and techniques have been widely applied in nuclear installations. This paper mainly introduces the development of the measuring (instrumentation methods for nuclear installations and the applications of these instruments and methods.

  8. IPPC installations in France and limit values of emission

    International Nuclear Information System (INIS)

    Soleille, S.

    2004-05-01

    The IPPC directive of the 24 September 1996 asked for the main european industrial installations an authorization. This authorization fixes limit values for pollutant emissions. In France, the main industrial installations are controlled since many years in the framework of the regulation on classified installations for the environment protection (ICPE). This report compares the limit values of emissions for the national and prefectorial orders and for the IPPC directive. (A.L.B.)

  9. Installation of an accelerator from theory to practice

    CERN Document Server

    Foraz, K; Weisz, S; CERN. Geneva. TS Department

    2004-01-01

    The size and complexity of the LHC project at CERN calls for a strong co-ordination of all installation activities. The detailed installation planning has to take into account many constraints such as the component production rates, the installation contracts or the transport and handling requirements in a narrow tunnel with limited access points. The planning also needs to be flexible enough to cope with aleas that are unavoidable in such a large project that spans over many years. This paper describes the follow-up methodology, both in the field and in the office, adopted by the IC team to assist the groups involved in the installation of the LHC machine.

  10. Use and regulatory control of dental X-ray installations

    International Nuclear Information System (INIS)

    1999-01-01

    In the guide the safety requirements concerning dental X-ray installations and their use, prerequisities for exemption from a safety licence, and regulatory control are presented. The guide applies to conventional dental X-ray installations, by which an image is created on an X-ray film or other image receptor placed inside the mouth, and panorama tomography installations for dentition and the cephalostats associated with these. The guide does not apply to multitechnique tomography installations intended for the special imaging of the skull or jaws

  11. RADAR 2020. Outline of important future developments for installation businesses

    International Nuclear Information System (INIS)

    Pleijster, F.; Braaksma, R.; Van Hoorik, P.; Pikaart, A.; Zwinkels, A.; Muizer, A.

    2010-11-01

    This RADAR focuses on future trends in the broad field of the installation industry with the aim of developing supporting policy for the installation businesses based on the objectives of UNETO-NVO and OTIB. Trends that can be earmarked as relevant for the installation industry are: Social development, Economic development, Technological development, Organizational development, Economic development, and Political development. In this framework, attention is mainly paid to the developments in the following working areas of the installation industry: Climate Engineering, Electrical Engineering, Sanitary engineering, and ICT. [nl

  12. Ship and Installation Program: Optimal Stationing of Naval Ships

    National Research Council Canada - National Science Library

    Colgary, Katherine A; Willett, Devon K

    2006-01-01

    .... Using constraints that maintain adequate pier capacity and unique capability installation, Configuration Analysis seeks to maximize a measure of military value while penalizing excess capacity...

  13. Installing and Scaling out Ubuntu Enterprise Cloud in Virtual Environment

    DEFF Research Database (Denmark)

    Pantić, Zoran; Ali Babar, Muhammad

    This document contains the supplemental material to the book “Guidelines for Building a Private Cloud Infrastructure”. This document provides guidance on how to install Ubuntu Enterprise Cloud in virtual environment, and afterwards how to scale out when needed. The purpose of this supplemental book...... is to provide a practical, step-by-step, detailed guide on how to dimension and install the machines and network. Some initial steps of configuring the cloud are also covered. The installation is performed in a virtual environment based on Windows 7 and VMware Workstation 7. The cloud installation is performed...... cloud, both using the command line tools, and GUI based tool HybridFox....

  14. Competent person for radiation protection. Practical radiation protection for base nuclear installations and installations classified for the environment protection

    International Nuclear Information System (INIS)

    Pin, A.; Perez, S.; Videcoq, J.; Ammerich, M.

    2008-01-01

    This book corresponds to the practical module devoted to the base nuclear installations and to the installations classified for the environment protection, that is to say the permanent nuclear installations susceptible to present risks for the public, environment or workers. Complied with the legislation that stipulates this module must allow to apply the acquired theoretical training to practical situations of work, it includes seven chapters as follow: generalities on access conditions in regulated areas of nuclear installation,s or installations classified for environment protection and clothing against contamination; use of control devices and management of damaged situations; methodology of working place studies, completed by the application to a real case of a study on an intervention on a containment wall; a part entitled 'take stock of the situation' ends every chapter and proposes to the reader to check its understanding and acquisition of treated knowledge. (N.C.)

  15. Determination of Classrooms Laboratory at Radiometallurgy Installation

    International Nuclear Information System (INIS)

    Budi Prayitno

    2007-01-01

    Determination of Classrooms Laboratory at Radiometallurgy Installation have been done. Determination Classrooms conducted by measuring amount particulate which have diameter 0.5 µm by using the measuring instrument of distribution of particulate type GT - 521 Met One made in USA. Measured by distribution particulate in room R.139 and R.142 and also R.171. The room is used to analyse the substance constructively appliance SEM / TEM and XRF. For the standard of determination of clean room weared the standard NIST ( National Institute of Standard of and Technology) class 100 with the congeniality sum up the particulate in smaller room or equal to 100 particulate/cubic foot for the diameter of 0.5 µm, or sum up the smaller particulate or equal to 3530 particulate/m 3 for the diameter of 0.5 µm. From measurement result is also learned by the influence of room dampness to amount particulate which distribution. Data intake of every minimum room 30 times and rectify the measurement taken away from deviation mean. From data got to be processed and mean to each room and its result as follows : R142 = (11,130,000 ± 320,000) particulate/m 3 have diameter 0.5 µm with the air dampness (62.24 ± 5.52) % and temperature (25.81 ± 0.40) ℃. R139 = (11,158,000 ± 282,000) particulate/m 3 have diameter 0.5 µm with the air dampness (63.65 ± 5.91) % and temperature (25.81 ± 0.40) ℃. R171 = (42,041,000 ± 1,914,000) particulate/m 3 have diameter 0.5 µm with the air dampness (61.95 ± 2.40) % and temperature (25.6 ± 0.58) ℃. All above mentioned room is included in Classification of Classrooms M7 or 100,000. (author)

  16. Regulatory Safety Requirements for Operating Nuclear Installations

    International Nuclear Information System (INIS)

    Gubela, W.

    2017-01-01

    The National Nuclear Regulator (NNR) is established in terms of the National Nuclear Regulator Act (Act No 47 of 1999) and its mandate and authority are conferred through sections 5 and 7 of this Act, setting out the NNR's objectives and functions, which include exercising regulatory control over siting, design, construction etc of nuclear installations through the granting of nuclear authorisations. The NNR's responsibilities embrace all those actions aimed at providing the public with confidence and assurance that the risks arising from the production of nuclear energy remain within acceptable safety limits -> Therefore: Set fundamental safety standards, conducting pro-active safety assessments, determining licence conditions and obtaining assurance of compliance. The promotional aspects of nuclear activities in South Africa are legislated by the Nuclear Energy Act (Act No 46 of 1999). The NNR approach to regulations of nuclear safety and security take into consideration, amongst others, the potential hazards associated with the facility or activity, safety related programmes, the importance of the authorisation holder's safety related processes as well as the need to exercise regulatory control over the technical aspects such as of the design and operation of a nuclear facility in ensuring nuclear safety and security. South Africa does not have national nuclear industry codes and standards. The NNR is therefore non-prescriptive as it comes to the use of industry codes and standards. Regulatory framework (current) provide for the protection of persons, property, and environment against nuclear damage, through Licensing Process: Safety standards; Safety assessment; Authorisation and conditions of authorisation; Public participation process; Compliance assurance; Enforcement

  17. The control of base nuclear installations; Le controle des installations nucleaires de base (INB)

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2009-04-15

    The Authority of Nuclear Safety ( A.S.N). presents in this column the current events of the control of the nuclear base installations during november, december 2008 and january 2009, classified by nuclear site. This information is also available in real-time on the A.S.N. web site, www.asn.fr, in the column 'news'. We can consult all the notices of significant incident published as well as the following letters of inspection, the notices of information about the reactors shutdown, press releases and the A.S.N. information notes. (N.C.)

  18. 30 CFR 77.1605 - Loading and haulage equipment; installations.

    Science.gov (United States)

    2010-07-01

    ... UNDERGROUND COAL MINES Loading and Haulage § 77.1605 Loading and haulage equipment; installations. (a) Cab... railroads shall be designed, installed, and maintained in a safe manner consistent with the speed and type... projection of moving railroad equipment shall be provided on at least one side of the tracks; all places...

  19. Installation, care, and maintenance of wood shake and shingle roofs

    Science.gov (United States)

    Tony Bonura; Jack Dwyer; Arnie Nebelsick; Brent Stuart; R. Sam Williams; Christopher Hunt

    2011-01-01

    This article gives general guidelines for selection, installation, finishing, and maintenance of wood shake and shingle roofs. The authors have gathered information from a variety of sources: research publications on wood finishing, technical data sheets from paint manufacturers, installation instructions for shake and shingle roofs, and interviews with experts having...

  20. Installation, care, and maintenance of wood shake and shingle siding

    Science.gov (United States)

    Jack Dwyer; Tony Bonura; Arnie Nebelsick; Sam Williams; Christopher G. Hunt

    2011-01-01

    This article gives general guidelines for selection, installation, finishing, and maintenance of wood shakes and shingles. The authors gathered information from a variety of sources: research publications on wood finishing, technical data sheets from paint manufacturers, installation instructions for shake and shingle siding, and interviews with experts having...

  1. 7 CFR 58.214 - General construction, repair and installation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false General construction, repair and installation. 58.214... Service 1 Equipment and Utensils § 58.214 General construction, repair and installation. All equipment and utensils necessary to the manufacture of dry milk products, including pasteurizer, timing-pump or device...

  2. Philosophy and safety requirements for land-based nuclear installations

    International Nuclear Information System (INIS)

    Kellermann, Otto

    1978-01-01

    The main ideas of safety philosophy for land-based nuclear installations are presented together with their background of protection goals. Today's requirements for design and quality assurance are deductively shown. Finally a proposition is made for a new balancing of safety philosophy according to the high safety level that nuclear installations have reached

  3. 30 CFR 77.509 - Transformers; installation and guarding.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Transformers; installation and guarding. 77.509... COAL MINES Electrical Equipment-General § 77.509 Transformers; installation and guarding. (a... feet from any energized parts, casings, or wiring. (b) Transformer stations shall be enclosed to...

  4. 30 CFR 56.12067 - Installation of transformers.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of transformers. 56.12067 Section... § 56.12067 Installation of transformers. Transformers shall be totally enclosed, or shall be placed at... at least 6 feet high and at least 3 feet from any energized parts, casings, or wiring. ...

  5. 46 CFR 76.27-15 - Operation and installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Operation and installation. 76.27-15 Section 76.27-15... EQUIPMENT Electric Fire Detecting System, Details § 76.27-15 Operation and installation. (a) The system... system. (e) All wiring and electrical circuits and equipment shall meet the applicable requirements of...

  6. 46 CFR 76.35-15 - Operation and installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Operation and installation. 76.35-15 Section 76.35-15... EQUIPMENT Manual Alarm System, Details § 76.35-15 Operation and installation. (a) The system shall be so... system. (d) All wiring and electrical circuits and equipment shall meet the applicable requirements of...

  7. 46 CFR 76.25-35 - Operation and installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Operation and installation. 76.25-35 Section 76.25-35... EQUIPMENT Automatic Sprinkling System, Details § 76.25-35 Operation and installation. (a) The system shall... all its components shall be used for no other purpose. (h) All wiring and electrical circuits and...

  8. 46 CFR 76.30-15 - Operation and installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Operation and installation. 76.30-15 Section 76.30-15... EQUIPMENT Pneumatic Fire Detecting System, Details § 76.30-15 Operation and installation. (a) The system... that it may be incorporated with the manual alarm system. (e) All wiring and electrical circuits and...

  9. Plutonium: resuspension of aerosols in nuclear installations: bibliographic survey

    International Nuclear Information System (INIS)

    Guetat, Ph.; Monfort, M.; Armand, P.; Alloul-Marmor, L.

    2006-01-01

    This document presents an analysis and a bibliographical synthesis of the studies on resuspension factors for plutonium. It aims at helping the engineers of safety to specify the scenarios of accidents which relate to their activities and to bring elements justified for the definition of their term-source 'installation' in the safety reports of the installations. (authors)

  10. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meters and regulators: Installation. 192... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a...

  11. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meter installations: Operating pressure... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure...

  12. 47 CFR 80.903 - Inspection of radiotelephone installation.

    Science.gov (United States)

    2010-10-01

    ... ship passes the inspection, the technician will issue a Communications Act Safety Radiotelephony... 47 Telecommunication 5 2010-10-01 2010-10-01 false Inspection of radiotelephone installation. 80... Passenger Boats § 80.903 Inspection of radiotelephone installation. Every vessel subject to Part III of...

  13. Authorization for the functioning of installations for food irradiation

    International Nuclear Information System (INIS)

    1980-09-01

    The conditions for the functioning of nuclear installations destinated to food irradiation are established according to the decree n 0 72718 of August, 29, 1973. These conditions are applied to any nuclear installations that uses food irradiation aiming to research or production of food in industrial scale. (E.G.) [pt

  14. 32 CFR 643.121 - Private organizations on DA installations.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Private organizations on DA installations. 643.121 Section 643.121 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... DA installations. (a) AR 210-1 defines and classifies private organizations, such as thrift shops and...

  15. 14 CFR 27.967 - Fuel tank installation.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel tank installation. 27.967 Section 27.967 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.967 Fuel tank installation. (a...

  16. 14 CFR 29.967 - Fuel tank installation.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel tank installation. 29.967 Section 29.967 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.967 Fuel tank installation...

  17. 14 CFR 25.967 - Fuel tank installations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel tank installations. 25.967 Section 25.967 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System § 25.967 Fuel tank installations...

  18. You're a What? Solar Photovoltaic Installer

    Science.gov (United States)

    Torpey, Elka Maria

    2009-01-01

    This article talks about solar photovoltaic (PV) installer and features Rebekah Hren, a solar PV installer who puts solar panels on roofs and in other sunny places to turn the sun's power into electricity. Hren enjoys promoting renewable energy, in part because it's an emerging field. In solar PV systems, solar cells--devices that convert sunlight…

  19. 40 CFR 1042.130 - Installation instructions for vessel manufacturers.

    Science.gov (United States)

    2010-07-01

    ...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES...-speed operation, tell vessel manufacturers not to install the engines in variable-speed applications or... vessel manufacturers. (a) If you sell an engine for someone else to install in a vessel, give the engine...

  20. Installation package for a solar heating and hot water system

    Science.gov (United States)

    1978-01-01

    Development and installation of two commercial solar heating and hot water systems are reported. The systems consist of the following subsystems: collector, storage, transport, hot water, auxiliary energy and controls. General guidelines are provided which may be utilized in development of detailed installation plans and specifications. In addition, operation, maintenance and repair of a solar heating and hot water system instructions are included.

  1. Annual report 1 January - 31 December 1978 computer installation

    International Nuclear Information System (INIS)

    1979-05-01

    The computer installation of Risoe National Laboratory functions as an internal service bureau. The staff is concentrated around operating the computer and providing expertise in the fields of numerical mathematics, statistics, operation research, systems software, and software engineering. Selected parts of the activities at the Computer Installation are described. (B.P.)

  2. 30 CFR 75.310 - Installation of main mine fans.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of main mine fans. 75.310 Section... mine fans. (a) Each main mine fan shall be— (1) Installed on the surface in an incombustible housing... that gives a signal at the mine when the fan either slows or stops. A responsible person designated by...

  3. 46 CFR 182.430 - Engine exhaust pipe installation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 182.430 Section 182... 100 GROSS TONS) MACHINERY INSTALLATION Specific Machinery Requirements § 182.430 Engine exhaust pipe... equipment might come in contact with an exhaust pipe. (b) Exhaust gas must not leak from the piping or any...

  4. Solution for Improve the Efficiency of Solar Photovoltaic Installation

    OpenAIRE

    Petru Chioncel; Cristian Paul Chioncel; Nicoleta Gillich

    2013-01-01

    This paper present a solution for improving efficiency of solar photovoltaic installation, realized with fixed solar photovoltaic modules, placed in solar parks or individual installations. The proposed solution to increase the radiation on the solar photovoltaic panels is to use some thin plates covered with a reflective blanket, mounted in front of the solar photovoltaic modules, with the possibility of their adjustment.

  5. Bridging interpersonal installation art with tangible business modeling

    DEFF Research Database (Denmark)

    Mitchell, Robb

    2012-01-01

    This position paper introduces an exploration of what deploying physical artefacts to enliven discussions about business innovation has in common with building room sized mechanical installations to provoke social interaction.......This position paper introduces an exploration of what deploying physical artefacts to enliven discussions about business innovation has in common with building room sized mechanical installations to provoke social interaction....

  6. Statement of nuclear incidents at nuclear installations

    International Nuclear Information System (INIS)

    2002-01-01

    The Health and Safety Executive (HSE) presents the statement of nuclear incidents at nuclear installations published under the Health and Safety Commission's powers derived from section 11 of the Health and Safety at Work, etc. Act 1974. INCIDENT 02/4/1. Harwell (United Kingdom Atomic Energy Authority) On 6 November 2002 during operations in a glove box in B220, the over pressure alarm sounded. The operators evacuated and shortly afterwards the airborne activity monitors also sounded. The building emergency arrangements for airborne activity alarms was initiated to ascertain the source and to manage the operations. An investigation by UKAEA confirmed that a release of Americium 241 into the working area had occurred at a quantity in excess of Schedule 8 column 4 of the Ionising Radiations Regulations 1999 (IRRs). A number of personnel have received intakes including the two operators and the health physics personnel who attended the event. The highest dose (up to 6 mSv.) was received by the Health Physics charge hand. UKAEA placed an embargo on the use of similar systems and have completed their own management investigation and produced an internal report. It concludes that the likely cause of the event was over-pressurisation of the vacuum equipment used in the process. The report also highlights improvements required to the ventilation system in the laboratory and adjoining areas. An action plan has been developed for this work and progress is being made. NIl has followed the UKAEA investigation and carried out its own study including a visit by a ventilation specialist. This has confirmed the problems with the ventilation system. It is a complex issue that may have a wider impact across the building. A letter has been sent to UKAEA detailing a series of short-term requirements and the need to review implications and produce a longer-term action plan. UKAEA is cooperating fully with these requirements. INCIDENT 02/4/2. Dounreay (United Kingdom Atomic Energy

  7. Evaluation Of RSG-GAS Power Installed After 12 Years

    International Nuclear Information System (INIS)

    Mrsahala, Yan Bony

    2001-01-01

    The total power installed in RSG-GAS electric system less then 3 x 2500 KVA. Some of powers installed included are the never used loads, so the operationally total load installed that regularly operational and incidental are amount about 3700 KVA. In this condition, the capacity of power transformer installed 3 x 2500 KVA becomes larger. The influences of the numinous power are electric bill payment by RSG-GAS. The reduces power installed may be done as well as remember that some of the load not be operation so that the power consume for that facility could be cut off. The evaluation and calculation result gives some alternatively can be selected to minimize the electric bill payment

  8. Installing Ubuntu Enterprise Cloud in a Physical Environment

    DEFF Research Database (Denmark)

    Pantić, Zoran; Ali Babar, Muhammad

    This document contains the supplemental material to “Guidelines for Building a Private Cloud Infrastructure.” This supplemental material provides guidance on how to install Ubuntu Enterprise Cloud in a physical environment. The purpose of this document is to provide a practical, step......-by-step, detailed guide on how to pre-configure and install the machines and network. For more detailed description of the steps, a reader is advised to refer to another supplemental book named “Installing and Scaling out Ubuntu Enterprise Cloud in Virtual Environment.” There are a few more details, accompanied...... with screenshots. The material included in this supplemental document is based on the installation that was performed in a physical environment based on HP ProLiant DL380 G4 servers, 100 Mbit/s witches, and a firewall/router that isolated the whole solution. The cloud installation was performed using the (for...

  9. Development regulation regarding with licensing of nuclear installation

    International Nuclear Information System (INIS)

    Bambang Riyono; Yudi Pramono; Dahlia Cakrawati Sinaga

    2011-01-01

    Provisions of Article 17 paragraph (3) of Law Number 10 Year 1997 on Nuclear cleary mandates for the establishment of government regulations (GR) on Nuclear licensing containing the requirements and procedure, both from the standpoint of their utilization and installation. To use has been rising GR No.29 Year 2008 on the Use of Ionizing Radiation Sources and Nuclear Materials, while for the installation has been published PP No.43 Year 2006 on Nuclear Reactor Licensing, and BAPETEN Chairman Decree No.3 Year 2006 on Non-reactor Nuclear Installation Licensing. Based on the background of the preparation of both the aforementioned are just regulate the reactor and utilization, not yet fully meet the mandate of Article 17 paragraph (3) of Law No.10 of 1997 on Nuclear, including other nuclear installations. For these reasons, it initiated the need for a separate regulation containing provisions concerning licensing of non-reactor nuclear installations. On the other side from the understanding the legal aspects and interpretations of the Law No.10 of 2004 on the Establishment Regulation Legislation, should be in single mandate of Article 17 paragraph (3) of Law No.10 of 1997 on Nuclear would only produce one of the requirements and procedure for the use or installation, or a maximum of two (2) GR related licensing the use and installation. This is encourages conducted the assessing or studies related to how possible it is according to the legal aspect is justified to combine in one Nuclear licensing regulations regarding both the use and installation, by looking at the complexity of installation and wide scope of utilization of nuclear energy in Indonesia. The results of this paper is expected to provide input in the preparation of GR on licensing of nuclear installations. (author)

  10. La RSE : nouvelle forme de dé-marchandisation du monde ? CSR: a new way of de-marchanisation of the world?

    Directory of Open Access Journals (Sweden)

    Richard Sobel

    2010-12-01

    Full Text Available Le mouvement dit de « RSE » entend concilier l’actuel mode d’accumulation à dominante financière avec certaines exigences sociales et environnementales. Or, ce mouvement s’inscrit assez bien dans l’analyse historique et institutionnaliste que Karl Polanyi a faite des limites de la marchandisation du monde. En effet, ce mouvement consiste à revenir sur la trop forte marchandisation du rapport à la nature et au travail qu’aurait entraîné le développement d’un capitalisme financiarisé. En réaction, ce mouvement mobilise l’engagement volontaire des entreprises pour bâtir une nouvelle « grande transformation », c’est-à-dire une forme inédite d’articulation entre le juste et l’efficace visant à assurer la viabilité du capitalisme. Cela revient à élargir l’engagement économique à autre chose que la simple maximisation des intérêts individuels de court terme. Cet article vise à exploiter cette proximité entre le mouvement de la RSE et l’analyse polanyienne de la marchandisation, proximité selon nous fructueuse et qui n’a jamais fait l’objet d’une analyse systématique. L’enjeu est de déterminer dans quelle mesure la RSE constitue aujourd’hui une réponse pertinente à la nécessaire gestion collective de la fiction que constitue la marchandisation apparente de la monnaie, de la terre et du travail.The movement says about "CSR" tries to reconcile the current financial mode of accumulation with certain social and environmental requirements. This movement joins well enough in the historic and institutionnalist analysis which Karl Polanyi made of the limits of marchandisation of the world. Indeed, this movement consists in returning on excess strong marchandisation of the relationship with the nature and with the work which would have pulled the new capitalism. In reaction, this movement mobilizes the individual commitment to build a new "great transformation", that is new articulation

  11. Littérature arabe en Israël : vers une sensibilité nouvelle Arabic Literature in Israel: Towards a New Sensibility ספרות ערבית בישראל

    Directory of Open Access Journals (Sweden)

    Sobhi Boustani

    2011-10-01

    Full Text Available La cause palestinienne chez les poètes arabes israéliens. Le présent article s’évertue à montrer les mouvements marquant l'évolution de la poésie arabe en Israël, dans un contexte contradictoire. Il souligne trois tendances principales. La première, explicitement militante, développée dans le giron de la Rakah, parti communiste israélien. Destinée à un public particulier et animée par une idéologie de combat, elle sacrifie parfois la poétique au profit de la politique. La deuxième tendance semble d'une nouvelle esthétique poétique basée sur l'individualité et l'expérience personnelle. La troisième voix poétique, profondément intimiste, est représentée par la poétesse Nida Khoury. Son approche de la résistance et du militantisme, ainsi que son approche originale de la langue révèle la profondeur d'une déchirure personnelle et la finesse d'un engagement subtilement exprimé.Enfin, le tiraillement intérieur entre deux appartenances et la recherche identitaire constituent l'un des principaux thèmes qui unissent les poètes de ces trois tendances.The present article focuses on showing the movements marking the evolution of Arabic poetry in Israel in a conflicting context. It points out three main tendencies. The first one, explicitly militant, developed in the lap of the Israeli communist party Rakah. Intended for a general public and animated by an ideology of fight, it sometimes sacrifices the poetics for the benefit of politics. The second tendency looks for a new poetic aesthetics based on individuality and personal experience. The third poetic voice, profoundly intimist, is represented by the poet Nidâ 'Khoury. Its approach of the resistance and the militancy as well as its original approach of the language reveal the depth of a personal tearing and the finesse of a subtly expressed commitment.Finally, the interior tugging between two belongings and the identical seeking constitute one of the main themes

  12. Installation, operation, and maintenance for the pyramidal optics solar system installed at Yacht Cover, Columbia, South Carolina

    Science.gov (United States)

    1980-09-01

    Information concerning the installation, operation, and maintenance of the pyramidal Solar System for space heating and domestic hot water is presented. Principles of operation, sequence of installation, and procedures for the operation and maintenance of each subsystem making up the solar system are presented. Troubleshooting charts and maintenance schedules are presented.

  13. Une nouvelle procédure d’expérimentation comportementale à l’interface entre les approches « Naturalistes » et « Généralistes » de la cognition du primate A new behavioral test procedure at the interface between “Naturalist” and “Generalist” approaches of primate cognition

    Directory of Open Access Journals (Sweden)

    Joël Fagot

    2011-02-01

    Full Text Available Le domaine d’étude de la cognition du primate est caractérisé par deux approches distinctes. L’approche Naturaliste consiste à s’intéresser aux comportements naturels, et à tenter de comprendre les facteurs et pressions sélectives qui ont permis l’émergence de ces fonctions au cours de la phylogenèse. L’approche Généraliste postule qu’il existe des traits cognitifs communs entre l’humain et l’animal, et cherche à identifier ces traits dans une recherche de laboratoire. Dans cet article, je présente une nouvelle méthode de recherche favorable à un interfaçage entre ces deux approches. La démarche consiste à installer un laboratoire en périphérie des enclos d’élevage, et à permettre aux sujets d’interagir librement avec les stations expérimentales, alors qu’ils sont maintenus dans leur groupe social. Cet article présente une synthèse des principaux résultats que nous avons obtenus avec cette approche, et les illustre, en en soulignant les avantages de notre approche par rapport aux approches plus traditionnelles de laboratoire.The study of primate cognition may adhere to two different paradigms. The first one is referred to as the Naturalist approach. Investigators in that field attempt to characterize natural behaviors, and to identify the various factors accounting for their evolution in nature.   The second one is referred to as the Generalist approach. Generalist researchers attempt to identify cognitive processes shared by animals and humans. While Naturalist researchers prefer natural or semi-natural conditions for their science, the context favored by the Generalist researchers is the laboratory allowing the test of isolated primates. In that paper, I present a novel experimental protocol favoring an interface between the Naturalist and Generalist approaches. The general idea of this protocol is to present a laboratory nearby an enclosure where monkeys live in a semi-natural context. The

  14. Lietojumprogrammu instalāciju izveides risinājumi

    OpenAIRE

    Zālītis, Mārtiņš

    2010-01-01

    Bakalaura darbā „Lietojumprogrammu instalāciju izveides risinājumi” mērķis ir izanalizēt lietotājam draudzīgas un nedraudzīgas instalācijas, kā arī salīdzināt instalāciju veidošanas rīkus, norādot uz to stiprajām un vājajām pusēm. Lai izpētītu instalāciju izveides iespējas tiek izmantota tīmeklī pieejamā informācija, autora darbs ar instalāciju rīkiem un to novērtējums. Parādīta sarežģītas instalācijas uzbūve, kas izveidota ar NSIS instalāciju rīku, kuru arī autors atzīst par labāko risinājum...

  15. Nuclear installations abroad the accident risks and their potential consequences

    International Nuclear Information System (INIS)

    Turvey, F.J.

    1996-01-01

    This paper endeavors to assess the threat to Ireland from severe accidents at civil nuclear installations. Among the various types of nuclear installations worldwide, reactors and reprocessing plants are considered to be the most threatening and so the paper focuses on these. The threat is assumed to be a function of the risk of severe accidents at the above types of installations and the probability of unfavourable weather conditions carrying the radioactive releases to Ireland. Although nuclear installations designed in eastern Europe and Asia are less safe than others, the greatest threat to Ireland arises from nearby installations in the UK. The difficulty of measuring the probabilities and consequences of severe nuclear accidents at nuclear installations in general is explained. In the case of the UK installations, this difficulty is overcome to some degree by using values of 'tolerable' risk adopted by the national nuclear regulator to define the radiotoxic releases from nuclear accidents. These are used as input to atmospheric dispersion models in which unfavourable weather conditions for Ireland are assumed and radiation doses are calculated to members of the Irish public. No countermeasures, such as sheltering, are assumed. In the worst cast scenario no deaths would be expected in Ireland in the immediate aftermath of the accident however, an increase in cancers over a period of 25 years or so would be expected assuming present-day models for the effect of low level radiation are valid

  16. Nuclear installations abroad the accident risks and their potential consequences

    Energy Technology Data Exchange (ETDEWEB)

    Turvey, F J [Radiological Protection Inst. of Ireland (Ireland)

    1996-10-01

    This paper endeavors to assess the threat to Ireland from severe accidents at civil nuclear installations. Among the various types of nuclear installations worldwide, reactors and reprocessing plants are considered to be the most threatening and so the paper focuses on these. The threat is assumed to be a function of the risk of severe accidents at the above types of installations and the probability of unfavourable weather conditions carrying the radioactive releases to Ireland. Although nuclear installations designed in eastern Europe and Asia are less safe than others, the greatest threat to Ireland arises from nearby installations in the UK. The difficulty of measuring the probabilities and consequences of severe nuclear accidents at nuclear installations in general is explained. In the case of the UK installations, this difficulty is overcome to some degree by using values of `tolerable` risk adopted by the national nuclear regulator to define the radiotoxic releases from nuclear accidents. These are used as input to atmospheric dispersion models in which unfavourable weather conditions for Ireland are assumed and radiation doses are calculated to members of the Irish public. No countermeasures, such as sheltering, are assumed. In the worst cast scenario no deaths would be expected in Ireland in the immediate aftermath of the accident however, an increase in cancers over a period of 25 years or so would be expected assuming present-day models for the effect of low level radiation are valid.

  17. Electrical installations of the Channel tunnel; Installations electriques du Tunnel sous la Manche

    Energy Technology Data Exchange (ETDEWEB)

    Kersabiec, G. de [Eurotunnel, Folkestone (United Kingdom)

    2002-08-01

    Like an underground factory, the railway and auxiliary equipments of the Channel tunnel between France and UK, need a reliable and redundant power supply with a high quality maintenance. This article presents: the design criteria of the power distribution systems, the installation itself and the organisation of its exploitation: 1 - transportation system of the Channel tunnel (loads to supply, exploitation imperatives, fundamental criteria); 2 - external power sources (connection to the UK and French grids, values used by the national grids); 3 - exploitation criteria, tunnel design; 4 - description (main UK and French power stations, 25 kV traction network, 21 kV distribution network, tunnels, lighting in railway tunnels, supply of terminals, earthing network); 5 - exploitation; 6 - maintenance and quality. (J.S.)

  18. Equipment installation structure of roof slab for tank type FBR and method of equipment installation

    International Nuclear Information System (INIS)

    Sakai, Takao; Yamakawa, Masanori; Otsuka, Masaya; Sekine, Katsuhisa

    1986-01-01

    Purpose: To reduce equipment thermal stress and deformation by eliminating uneven temperature distribution caused at the equipment through section of the roof slab for the tank FBR, and at the same time, simplify the structure installation. Method: Multiple number of vertical fin projects are fit on the equipment through-section inside wall for the roof slab and the cylindrical equipment peripheral wall, and with these projected fins, the ring space of the through section is vertically divided into multiple sections in the circumferential direction. The vertical fins on the through-section inside wall and the fins on the equipment peripheral wall are contacted with each other by revolving them in the lateral direction. As a result, the natural convection caused by the difference of temperatures in the vertical direction of the ring space becomes a convection within each sector divided, and never generates circumferential circulation, which reduce uneven temperature distribution caused at the equipment through section. (Kawakami, Y.)

  19. 562,3 MWP installed in european union

    International Nuclear Information System (INIS)

    Anon.

    2004-01-01

    In the end, the growth problems that were announced for the European photovoltaic market did not happen. With 170 MWp of additional capacity installed in the European Union 2003 has marked a new record high in installations bringing European installed capacity up to the neighbourhood of 562 MWp. While this sector's expansion has been remarkable (+ 43.4 % with respect to 2002), a lot of questions still remain with respect to the true will of certain countries to develop this form of energy. (author)

  20. Laser ionization installation for measurement of atomic beam parameters

    CERN Document Server

    Tukhlibaev, O; Khalilov, E E; Alimov, U Z

    2002-01-01

    The design of the laser ionization installation for determination of the atomic beam intensity, density and spatial structure is described. The method of the atoms laser resonance staged photoionization is applied in the installation. The above installation consists of two lasers on the dyestuffs, the atomizer, the ionization system and the ion signals registration system. The results of studies on the spatial structure of the In atoms beam are presented. The proposed method provides for the spatial resolution at the level of 10-100 mu m