WorldWideScience

Sample records for nonroad spark-ignition engines

  1. Utilization of Alcohol Fuel in Spark Ignition and Diesel Engines.

    Science.gov (United States)

    Berndt, Don; Stengel, Ron

    These five units comprise a course intended to prepare and train students to conduct alcohol fuel utilization seminars in spark ignition and diesel engines. Introductory materials include objectives and a list of instructor requirements. The first four units cover these topics: ethanol as an alternative fuel (technical and economic advantages,…

  2. Towards a general turbulent combustion model for spark ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Naji, H.; Said, R.; Borghi, R.P.

    1989-01-01

    The prediction of combustion within spark ignition engines needs to take into account the interaction of turbulent fluctuations. Previous attempts at this used a model in which the chemical processes were supposed infinitely fast and the combustion was controlled by turbulent mixing only. This paper describes their progress in extending such models in two directions.

  3. The Use of Spark Ignition Engine in Domestic Cogeneration

    Directory of Open Access Journals (Sweden)

    Feiza Memet

    2009-10-01

    Full Text Available Cogeneration plants are strongly sustained by EU energy policies, one of the best beneficiary of this technology being residential buildings. This paper focus on spark ignition engine as a cogeneration application in order to supply energy for domestic consumers. Are considered two aspects of this solution: the energetic aspect and the environmental one. The energetic aspect deals with the energetic ratios, while the environmental aspect refers to the nitrogen oxide and carbon monoxide emissions.

  4. Intake Manifold Boosting of Turbocharged Spark-Ignited Engines

    Directory of Open Access Journals (Sweden)

    Lino Guzzella

    2013-03-01

    Full Text Available Downsizing and turbocharging is a widely used approach to reduce the fuel consumption of spark ignited engines while retaining the maximum power output. However, a substantial loss in drivability must be expected due to the occurrence of the so-called turbo lag. The turbo lag results from the additional inertia that the turbocharger adds to the system. Supplying air by an additional valve, the boost valve, to the intake manifold can be used to overcome the turbo lag. This turbo lag compensationmethod is referred to as intakemanifold boosting. The aims of this study are to show the effectiveness of intake manifold boosting on a turbocharged spark-ignited engine and to show that intake manifold boosting can be used as an enabler of strong downsizing. Guidelines for the dimensioning of the boost valve are given and a control strategy is presented. The trade-off between additional fuel consumption and the consumption of pressurized air during the turbo lag compensation is discussed. For a load step at 2000 rpm the rise time can be reduced from 2.8 s to 124ms, requiring 11.8 g of pressurized air. The transient performance is verified experimentally by means of load steps at various engine speeds to various engine loads.

  5. Diesel engines vs. spark ignition gasoline engines -- Which is ``greener``?

    Energy Technology Data Exchange (ETDEWEB)

    Fairbanks, J.W. [Dept. of Energy, Washington, DC (United States)

    1997-12-31

    Criteria emissions, i.e., NO{sub x}, PM, CO, CO{sub 2}, and H{sub 2}, from recently manufactured automobiles, compared on the basis of what actually comes out of the engines, the diesel engine is greener than spark ignition gasoline engines and this advantage for the diesel engine increases with time. SI gasoline engines tend to get out of tune more than diesel engines and 3-way catalytic converters and oxygen sensors degrade with use. Highway measurements of NO{sub 2}, H{sub 2}, and CO revealed that for each model year, 10% of the vehicles produce 50% of the emissions and older model years emit more than recent model year vehicles. Since 1974, cars with SI gasoline engines have uncontrolled emission until the 3-way catalytic converter reaches operating temperature, which occurs after roughly 7 miles of driving. Honda reports a system to be introduced in 1998 that will alleviate this cold start problem by storing the emissions then sending them through the catalytic converter after it reaches operating temperature. Acceleration enrichment, wherein considerable excess fuel is introduced to keep temperatures down of SI gasoline engine in-cylinder components and catalytic converters so these parts meet warranty, results in 2,500 times more CO and 40 times more H{sub 2} being emitted. One cannot kill oneself, accidentally or otherwise, with CO from a diesel engine vehicle in a confined space. There are 2,850 deaths per year attributable to CO from SI gasoline engine cars. Diesel fuel has advantages compared with gasoline. Refinery emissions are lower as catalytic cracking isn`t necessary. The low volatility of diesel fuel results in a much lower probability of fires. Emissions could be improved by further reducing sulfur and aromatics and/or fuel additives. Reformulated fuel has become the term covering reducing the fuels contribution to emissions. Further PM reduction should be anticipated with reformulated diesel and gasoline fuels.

  6. Influence of hydrox on spark ignition engine performance

    Energy Technology Data Exchange (ETDEWEB)

    Naude, A.F. [University of Pretoria, Pretoria (South Africa). Dept. of Mechanical and Aeronautical Engineering

    2003-07-01

    A series of experiments were conducted on a Mazda 1600 cc fuel injected engine connected to a Superflow SF901 dynamometer system to examine the influence of small quantities of Hydrox (hydrogen and oxygen), as generated through electrolysis of water, on the performance of a spark ignition engine. The engine was also equipped with a Unichip engine management system in order to enable changes in the spark timing and the amount of fuel injected. Electrolysis was used to generate Hydrox. The process could either be powered from a separate power source or from the engine's alternator. Hydrox was introduced into the engine's intake manifold, and measurements were taken of the engine's performance, emissions and fuel consumption. The authors simulated a typical load condition as experienced for a light passenger car operating at 100 kilometres per hour on the open road. A significant reduction in hydrocarbons at lean air-fuel ratio operation of the engine was observed with the introduction of Hydrox, and there was also a slight improvement in fuel consumption when the electrolysis process was driven by the engine. 2 refs., 1 tab., 5 figs.

  7. Utilization of waste glycerin to fuelling of spark ignition engines

    Science.gov (United States)

    Stelmasiak, Z.; Pietras, D.

    2016-09-01

    The paper discusses a possibilities of usage a simple alcohols to fuelling of spark ignition engines. Methanol and blends of methanol with glycerin, being a waste product from production of bio-components to fuels based on rapeseed oil, have been used in course of the investigations. The main objective of the research was to determine possibilities of utilization of glycerin to blending of engine fuels. The investigations have been performed using the Fiat 1100 MPI engine. Parameters obtained with the engine powered by pure methanol and by methanol- glycerin mixtures with 10÷30%vol content of glycerin were compared to parameters of the engine fuelled conventionally with the E95 gasoline. The investigations have shown increase of overall efficiency of the engine run on pure methanol with 2.5÷5.0%, and run on the mixture having 10% addition of glycerin with 2.0÷7.8%. Simultaneously, fuelling of the engine with the investigated alcohols results in reduced concentration of toxic components in exhaust gases like: CO, THC and NOx, as well as the greenhouse gas CO2.

  8. Aspects of the bioethanol use at the turbocharged spark ignition engine

    Directory of Open Access Journals (Sweden)

    Obeid Zuhair

    2015-01-01

    Full Text Available In the actual content of pollution regulations for the automotives, the use of alternative fuels becomes a priority of the thermal engine scientific research domain. From this point of view bioethanol can represents a viable alternative fuel for spark ignition engines offering the perspective of pollutant emissions reduction and combustion improvement. The paper presents results of the experimental investigations of a turbo-supercharged spark ignition engine (developed from a natural admission spark ignition engine fuelled with gasoline fuelled with bioethanol-gasoline blends. The engine is equipped with a turbocharger for low pressure supercharging, up till 1.4 bar. An correlation between air supercharging pressure-compression ratio-dosage-spark ignition timing-brake power is establish to avoid knocking phenomena at the engine operate regime of full load and 3000 min-1. The influences of the bioethanol on pollutant emissions level are presented.

  9. Numerical simulation of spark ignition engine using OpenFOAM®

    Directory of Open Access Journals (Sweden)

    B.T. Kannan

    2016-09-01

    Full Text Available The present work is the numerical investigation of Spark Ignition (SI engines using an open source Computational Fluid Dynamics (CFD tool. Investigations on the usage of OpenFOAM® CFD tool has been carried out for the simulation of SI engines using engineFoam solver. Four-valve pent roof type engine is chosen for the present simulations. The standard k–ɛ turbulence model is used along with the Reynolds Averaged Navier Stokes (RANS equations for simulating the flow field. Energy equation and transport equation for regress variable is solved along with the momentum equations. Xi model is used for the transport and Gulder's correlation is used for laminar flame speed. Unstrained model is used for calculating the laminar flame speed velocity. Two simulations are carried out one with cold flow and the other with combustion. For combustion analysis, Iso-octane fuel is used. Average cylinder pressure is tracked for different Crank Angles (CA from −180 to 60. The temperature contours are plotted on a vertical plane inside the cylinder to indicate the rise in temperature due to combustion. The results indicate that the open source CFD code can be an ideal choice for engine designers.

  10. THE EFFECT OF COMPRESSION RATIO VARIATIONS ON THE ENGINE PERFORMANCE PARAMETRES IN SPARK IGNITION ENGINES

    Directory of Open Access Journals (Sweden)

    Yakup SEKMEN

    2005-01-01

    Full Text Available Performance of the spark ignition engines may be increased by changing the geometrical compression ratio according to the amount of charging in cylinders. The designed geometrical compression ratio can be realized as an effective compression ratio under the full load and full open throttle conditions since the effective compression ratio changes with the amount of charging into the cylinder in spark ignition engines. So, this condition of the spark ignition engines forces designers to change their geometrical compression ratio according to the amount of charging into the cylinder for improvement of performance and fuel economy. In order to improve the combustion efficiency, fuel economy, power output, exhaust emissions at partial loads, compression ratio must be increased; but, under high load and low speed conditions to prevent probable knock and hard running the compression ratio must be decreased gradually. In this paper, relation of the performance parameters to compression ratio such as power, torque, specific fuel consumption, cylindir pressure, exhaust gas temperature, combustion chamber surface area/volume ratio, thermal efficiency, spark timing etc. in spark ignition engines have been investigated and using of engines with variable compression ratio is suggested to fuel economy and more clear environment.

  11. Development And Testing Of Biogas-Petrol Blend As An Alternative Fuel For Spark Ignition Engine

    Directory of Open Access Journals (Sweden)

    Awogbemi

    2015-08-01

    Full Text Available Abstract This research is on the development and testing of a biogas-petrol blend to run a spark ignition engine. A2080 ratio biogaspetrol blend was developed as an alternative fuel for spark ignition engine test bed. Petrol and biogas-petrol blend were comparatively tested on the test bed to determine the effectiveness of the fuels. The results of the tests showed that biogas petrol blend generated higher torque brake power indicated power brake thermal efficiency and brake mean effective pressure but lower fuel consumption and exhaust temperature than petrol. The research concluded that a spark ignition engine powered by biogas-petrol blend was found to be economical consumed less fuel and contributes to sanitation and production of fertilizer.

  12. BIOSTABILITY OF USED LUBRICATING OILS FOR HIGH-SPEED ENGINES WITH SPARK IGNITION

    OpenAIRE

    YUSIFOVA AIDA RAFIQ QIZI; RAFIYEV AZAD NATIG OGLU

    2015-01-01

    The article presents the investigation results of the biological stability of the waste and regenerated lubricating oil Mysella-40, designed for high-speed engines with spark ignition. Biocides were prepared to protect the oil from microbial destruction. It was found that the use of biocides in the recommended concentration has no negative effect on the basic performance of the lubricating oil.

  13. Conversion of a diesel engine to a spark ignition natural gas engine

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Requirements for alternatives to diesel-fueled vehicles are developing, particularly in urban centers not in compliance with mandated air quality standards. An operator of fleets of diesel- powered vehicles may be forced to either purchase new vehicles or equip some of the existing fleets with engines designed or modified to run on alternative fuels. In converting existing vehicles, the operator can either replace the existing engine or modify it to burn an alternative fuel. Work described in this report addresses the problem of modifying an existing diesel engine to operate on natural gas. Tecogen has developed a technique for converting turbocharged automotive diesel engines to operate as dedicated spark-ignition engines with natural gas fuel. The engine cycle is converted to a more-complete-expansion cycle in which the expansion ratio of the original engine is unchanged while the effective compression ratio is lowered, so that engine detonation is avoided. The converted natural gas engine, with an expansion ratio higher than in conventional spark- ignition natural gas engines, offers thermal efficiency at wide-open- throttle conditions comparable to its diesel counterpart. This allows field conversion of existing engines. Low exhaust emissions can be achieved when the engine is operated with precise control of the fuel air mixture at stoichiometry with a 3-way catalyst. A Navistar DTA- 466 diesel engine with an expansion ratio of 16.5 to 1 was converted in this way, modifying the cam profiles, increasing the turbocharger boost pressure, incorporating an aftercooler if not already present, and adding a spark-ignition system, natural gas fuel management system, throttle body for load control, and an electronic engine control system. The proof-of-concept engine achieved a power level comparable to that of the diesel engine without detonation. A conversion system was developed for the Navistar DT 466 engine. NOx emissions of 1.5 g/bhp-h have been obtained.

  14. Method for operating a spark-ignition, direct-injection internal combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Narayanaswamy, Kushal; Koch, Calvin K.; Najt, Paul M.; Szekely, Jr., Gerald A.; Toner, Joel G.

    2015-06-02

    A spark-ignition, direct-injection internal combustion engine is coupled to an exhaust aftertreatment system including a three-way catalytic converter upstream of an NH3-SCR catalyst. A method for operating the engine includes operating the engine in a fuel cutoff mode and coincidentally executing a second fuel injection control scheme upon detecting an engine load that permits operation in the fuel cutoff mode.

  15. About the constructive and functional particularities of spark ignition engines with gasoline direct injection: experimental results

    Science.gov (United States)

    Niculae, M.; Ivan, F.; Neacsu, D.

    2017-08-01

    The paper aims to analyze and compare the environmental performances between a gasoline direct engine and a multi-point injection engine. There are analyzed the stages of emission formation during the New European Driving Cycle. The paper points out the dynamic, economic and environmental performances of spark ignition engines equipped with a GDI systems. Reason why, we believe the widespread implementation of this technology is today an immediate need.

  16. AN INVESTIGATION OF THE EFFECTS OF INTAKE VALVE LIFT ON THE PERFORMANCE IN SPARK IGNITION ENGINES

    Directory of Open Access Journals (Sweden)

    Can ÇINAR

    2004-02-01

    Full Text Available In this study, the effects of intake valve lift variation on engine performance have been investigated experimentally. An alternative prototype has been designed and constructed for variable valve systems. A fourstroke, single cylinder, spark ignition engine has been used for experiments. The effects of four different intake valve lift value (6.5 mm, 5 mm, 4 mm and 3 mm on volumetric efficiency, engine torque, specific fuel consumption and exhaust emissions have been investigated.

  17. Effect of biofuel E85 combustion on fuel consumption in spark-ignition engines

    Directory of Open Access Journals (Sweden)

    Adam Polcar

    2012-01-01

    Full Text Available Biofuels represent an alternative source of energy that should gradually decrease our dependence on crude oil. A rapid development of their use in combustion engines is above all the consequence of their very positive balance of emissions. The possibility of use of biofuels in conventional combustion engines is given by their physico-chemical properties. Bioethanol is one of biofuels that can be used in spark-ignition engines. However, because of its lower heating value, it is necessary to change the mixing ratio fuel/air. The aim of this paper is to evaluate the effect of combustion of a mixture of bioethanol with gasoline (in the ratio 85:15 on fuel consumption in the spark-ignition engine. Experimental measurements were performed using a six-cylinder spark-ignition Peugeot engine with the overall volume of 2.946 cm3, which was equipped with a multi-hole system of indirect injection. Obtained results indicated that the combustion of E85 biofuel markedly increased the reduction of specific fuel consumption (corrected to atmospheric conditions. As compared with gasoline Natural 95, the actual volume consumption of E85 biofuel increased under the maximum engine load in average by 30.4 %. In spite of a relatively high consumption of E85 biofuel the total costs associated with running of a modified engine were lower than those of the engine combusting gasoline Natural 95.

  18. Knock Detection in Spark Ignition Engines Base on Complementary Ensemble Empirical Mode Decomposition-Hilbert Transform

    Directory of Open Access Journals (Sweden)

    Fengrong Bi

    2016-01-01

    Full Text Available In spark ignition engines, knock onset limits the maximum spark advance. An inaccurate identification of this limit penalises the fuel conversion efficiency. Thus knock feature extraction is the key of closed-loop control of ignition in spark ignition engine. This paper reports an investigation of knock detection in spark ignition (SI engines using CEEMD-Hilbert transform based on the engine cylinder pressure signals and engine cylinder block vibration signals. Complementary Ensemble Empirical Mode Decomposition (CEEMD was used to decompose the signal and detect knock characteristic. Hilbert transform was used to analyze the frequency information of knock characteristic. The result shows that, for both of cylinder pressure signals and vibration signals, the CEEMD algorithm could extract the knock characteristic, and the Hilbert transform result shows that the energy of knock impact areas has the phenomenon of frequency concentration in both cylinder pressure signal and cylinder block vibration signal. At last, the knock window is then determined, based on which a new knock intensity evaluation factor K is propose, and it can accurately distinguish between heavy knock, light knock, and normal combustion three states.

  19. Experimental determination of the filling coefficient for an aspirated spark-ignition engine

    Science.gov (United States)

    Raţiu, S.; Alexa, V.; Kiss, I.; Cioată, V.

    2017-01-01

    This study aims at determining, by experiment, the filling coefficient of a spark-ignition, normal aspirated engine, with carburettor. For this purpose, a pilot plant was designed for measuring the pressure at various points on the route, simulating a stationary air flow regime by means of a vacuum pump. Measurements were made for various lifting heights of the intake valve and various opening positions of the throttle body, thus highlighting how their influence on the pressure loss and on the filling coefficient.

  20. Different Boosting Systems and their Control Strategies for a Spark Ignition Internal Combustion Engine

    OpenAIRE

    Bolehovský Ondřej; Macek Jan

    2016-01-01

    This research uses 1-D simulation in GT-Power for evaluation of boosting systems for a spark ignition engine. Exhaust gas driven (waste-gated turbocharger) and mechanical driven (Roots blower) boosting systems are assessed in both steady state and transient modes in terms of performance, efficiency, fuel consumption, drivability, energy distribution and other aspects that influence gas exchange phase. Moreover, different boost control strategies, particularly at partial load, are also evaluat...

  1. Experimental evaluation of a spark-ignited engine using biogas as fuel

    Directory of Open Access Journals (Sweden)

    Juan Miguel Mantilla González

    2010-07-01

    Full Text Available Different CH4 and CO2 mixtures were used as fuel in this work; they were fed into a spark-ignited engine equipped with devices allowing spark advance, gas delivery and gas consumption to be measured. Engine bench-tests re-vealed changes in the main operation parameters and emissions. The results showed that increasing CO2 percen-tage in the mixture increased the spark angle, reduced maximum power and torque and reduced exhaust emissions (by 90% in some cases when DAMA resolution 1015/2005 was applied. The main components to be considered when an engine of this type operates with gas fuel were also recognised.

  2. An assessment of combustion products of spark ignition engines supplied by ethanol - gasoline blends

    Science.gov (United States)

    Uzuneanu, K.; Golgotiu, E.

    2016-08-01

    The causes of environmental pollution by internal combustion engines arise from the use of fuels containing bounded carbon, from the fact that combustion takes place on a cyclic basis and at high temperature. The first and the last causes are directly related to the fuel and therefore there is in principle a possibility to reduce pollution by acting upon the fuel used. The present paper deals with the comparison of the level of combustion products of a spark ignition engine supplied by gasoline and by a mixture of 10 % ethanol - 90% gasoline.

  3. Performance and emissions analysis on using acetone–gasoline fuel blends in spark-ignition engine

    OpenAIRE

    2016-01-01

    In this study, new blended fuels were formed by adding 3–10 vol. % of acetone into a regular gasoline. According to the best of the author's knowledge, it is the first time that the influence of acetone blends has been studied in a gasoline-fueled engine. The blended fuels were tested for their energy efficiencies and pollutant emissions using SI (spark-ignition) engine with single-cylinder and 4-stroke. Experimental results showed that the AC3 (3 vol.% acetone + 97 vol.% gasoline) blended fu...

  4. Spark Ignition Engine Combustion, Performance and Emission Products from Hydrous Ethanol and Its Blends with Gasoline

    Directory of Open Access Journals (Sweden)

    Musaab O. El-Faroug

    2016-11-01

    Full Text Available This paper reviews the serviceability of hydrous ethanol as a clean, cheap and green renewable substitute fuel for spark ignition engines and discusses the comparative chemical and physical properties of hydrous ethanol and gasoline fuels. The significant differences in the properties of hydrous ethanol and gasoline fuels are sufficient to create a significant change during the combustion phase of engine operation and consequently affect the performance of spark-ignition (SI engines. The stability of ethanol-gasoline-water blends is also discussed. Furthermore, the effects of hydrous ethanol, and its blends with gasoline fuel on SI engine combustion characteristics, cycle-to-cycle variations, engine performance parameters, and emission characteristics have been highlighted. Higher water solubility in ethanol‑gasoline blends may be obviously useful and suitable; nevertheless, the continuous ability of water to remain soluble in the blend is significantly affected by temperature. Nearly all published engine experimental results showed a significant improvement in combustion characteristics and enhanced engine performance for the use of hydrous ethanol as fuel. Moreover, carbon monoxide and oxides of nitrogen emissions were also significantly decreased. It is also worth pointing out that unburned hydrocarbon and carbon dioxide emissions were also reduced for the use of hydrous ethanol. However, unregulated emissions such as acetaldehyde and formaldehyde were significantly increased.

  5. Flow-pattern switching in a Motored Spark Ignition Engine

    CERN Document Server

    Abraham, Preeti S; Gupta, Saurabh; Kuo, Tang-Wei; Reuss, David L; Sick, Volker

    2014-01-01

    Cyclic-to-cycle variability, CCV, of intake-jet flow in an optical engine was measured using particle image velocimetry (PIV), revealing the possibility of two different flow patterns. A phase-dependent proper orthogonal decomposition (POD) analysis showed that one or the other flow pattern would appear in the average flow, sampled from test to test or sub-sampled within a single test; each data set contained individual cycles showing one flow pattern or the other. Three-dimensional velocity data from a large-eddy simulation (LES) of the engine showed that the PIV plane was cutting through a region of high shear between the intake jet and another large flow structure. Rotating the measurement plane 10{\\deg} revealed one or the other flow structure observed in the PIV measurements. Thus, it was hypothesized that cycle-to-cycle variations in the swirl ratio result in the two different flow patterns in the PIV plane. Having an unambiguous metric to reveal large-scale flow CCV, causes for this variability were ex...

  6. Different Boosting Systems and their Control Strategies for a Spark Ignition Internal Combustion Engine

    Directory of Open Access Journals (Sweden)

    Bolehovský Ondřej

    2016-06-01

    Full Text Available This research uses 1-D simulation in GT-Power for evaluation of boosting systems for a spark ignition engine. Exhaust gas driven (waste-gated turbocharger and mechanical driven (Roots blower boosting systems are assessed in both steady state and transient modes in terms of performance, efficiency, fuel consumption, drivability, energy distribution and other aspects that influence gas exchange phase. Moreover, different boost control strategies, particularly at partial load, are also evaluated. Results of the research are aimed at helping identify an optimal boosting system for standardized or real-world drive cycles.

  7. Numerical study on the combustion process of a biogas spark-ignition engine

    Directory of Open Access Journals (Sweden)

    Carrera José L.

    2013-01-01

    Full Text Available The fuel called biogas is obtained through anaerobic digestion of different types of organic waste, providing a way to tap the energy stored in organic matter. The use of this fuel is also attractive from the standpoint of global warming because its application does not register a net emission of carbon dioxide into the atmosphere. One possible use for this fuel is to feed the spark-ignition internal combustion engines. In the present, there is little information available about the process of combustion in internal combustion engines fueled by biogas. The combustion process of an internal combustion engine ignition powered by biogas is characterized in terms of the duration of combustion, i.e., depending on the time elapsed while the reactants (methane and oxygen are transformed into products (mainly carbon dioxide and water. This study numerically evaluates the way in which the geometrical parameters such as the compression ratio and operating parameters like engine speed, the excess air, the time of spark timing and carbon dioxide content of biogas affect the evolution of the combustion process. To carry out this study, a five factors and two levels experiment was designed and conducted, based on which, the most influential parameters were identified. Equations expressing the combustion characteristic parameters, as a function of the geometric and operation parameters of a spark ignited engines, are delivered as a result.

  8. Combustion characteristics of spark-ignition and pilot flame ignition systems in a model Wankel stratified charge engine

    Energy Technology Data Exchange (ETDEWEB)

    Muroki, T. [Kanagawa Inst. of Technology, Dept. of Mechanical Engineering, Kanagawa (Japan); Moriyoshi, Y. [Chiba Univ., Dept. of Electronics and Mechanical Engineering, Chiba (Japan)

    2000-11-01

    In a stratified charge engine, a glow plug pilot flame ignition system has been compared with a spark-ignition system for a model stratified charge Wankel combustion chamber. A motored two-stroke diesel engine was operated as a rapid compression and expansion machine with the cylinder head replaced by a model Wankel combustion chamber designed to simulate the temporal changes of air flow and pressure fields inside the chamber of an actual engine. It was found that the pilot flame ignition system had better ignitability and improved combustion characteristics, especially in the lean mixture range, relative to the spark-ignition system. (Author)

  9. Application of Alcohols to Dual - Fuel Feeding the Spark-Ignition and Self-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Stelmasiak Zdzisław

    2014-10-01

    Full Text Available This paper concerns analysis of possible use of alcohols for the feeding of self - ignition and spark-ignition engines operating in a dual- fuel mode, i.e. simultaneously combusting alcohol and diesel oil or alcohol and petrol. Issues associated with the requirements for application of bio-fuels were presented with taking into account National Index Targets, bio-ethanol production methods and dynamics of its production worldwide and in Poland. Te considerations are illustrated by results of the tests on spark- ignition and self- ignition engines fed with two fuels: petrol and methanol or diesel oil and methanol, respectively. Te tests were carried out on a 1100 MPI Fiat four- cylinder engine with multi-point injection and a prototype collector fitted with additional injectors in each cylinder. Te other tested engine was a SW 680 six- cylinder direct- injection diesel engine. Influence of a methanol addition on basic operational parameters of the engines and exhaust gas toxicity were analyzed. Te tests showed a favourable influence of methanol on combustion process of traditional fuels and on some operational parameters of engines. An addition of methanol resulted in a distinct rise of total efficiency of both types of engines at maintained output parameters (maximum power and torque. In the same time a radical drop in content of hydrocarbons and nitrogen oxides in exhaust gas was observed at high shares of methanol in feeding dose of ZI (petrol engine, and 2-3 fold lower smokiness in case of ZS (diesel engine. Among unfavourable phenomena, a rather insignificant rise of CO and NOx content for ZI engine, and THC and NOx - for ZS engine, should be numbered. It requires to carry out further research on optimum control parameters of the engines. Conclusions drawn from this work may be used for implementation of bio-fuels to feeding the combustion engines.

  10. Internal combustion engine report: Spark ignited ICE GenSet optimization and novel concept development

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.; Blarigan, P. Van [Sandia National Labs., Livermore, CA (United States)

    1998-08-01

    In this manuscript the authors report on two projects each of which the goal is to produce cost effective hydrogen utilization technologies. These projects are: (1) the development of an electrical generation system using a conventional four-stroke spark-ignited internal combustion engine generator combination (SI-GenSet) optimized for maximum efficiency and minimum emissions, and (2) the development of a novel internal combustion engine concept. The SI-GenSet will be optimized to run on either hydrogen or hydrogen-blends. The novel concept seeks to develop an engine that optimizes the Otto cycle in a free piston configuration while minimizing all emissions. To this end the authors are developing a rapid combustion homogeneous charge compression ignition (HCCI) engine using a linear alternator for both power take-off and engine control. Targeted applications include stationary electrical power generation, stationary shaft power generation, hybrid vehicles, and nearly any other application now being accomplished with internal combustion engines.

  11. Prediction of small spark ignited engine performance using producer gas as fuel

    Directory of Open Access Journals (Sweden)

    N. Homdoung

    2015-03-01

    Full Text Available Producer gas from biomass gasification is expected to contribute to greater energy mix in the future. Therefore, effect of producer gas on engine performance is of great interest. Evaluation of engine performances can be hard and costly. Ideally, they may be predicted mathematically. This work was to apply mathematical models in evaluating performance of a small producer gas engine. The engine was a spark ignition, single cylinder unit with a CR of 14:1. Simulation was carried out on full load and varying engine speeds. From simulated results, it was found that the simple mathematical model can predict the performance of the gas engine and gave good agreement with experimental results. The differences were within ±7%.

  12. Full Load Performance of a Spark Ignition Engine Fueled with Gasoline-Isobutanol Blends

    Directory of Open Access Journals (Sweden)

    Adrian Irimescu

    2009-10-01

    Full Text Available With fossil fuels reserves coming ever closer to depletion and the issue of air pollution caused by automotive transport becoming more and more important, mankind has looked for various solutions in the field of internal combustion engines. One of these solutions is using biofuels, and while the internal combustion engine will most likely disappear along with the last fossil fuel source, studying biofuels and their impact on automotive power-trains is a necessity even if only on a the short term basis. While engines built to run on alcohol-gasoline blends offer good performance levels even at high concentrations of alcohol, unmodified engines fueled with blends of biofuels and fossil fuels can exhibit a drop in power. The object of this study is evaluating such phenomena when a spark ignition engine is operated at full load.

  13. Exhaust emissions of methanol and ethanol-unleaded gasoline blends in a spark-ignition engine

    Directory of Open Access Journals (Sweden)

    Altun Şehmus

    2013-01-01

    Full Text Available In this study, the effect of unleaded gasoline and unleaded gasoline blended with 5% and 10% of ethanol or methanol on the performance and exhaust emissions of a spark-ignition engine were experimentally investigated. The engine tests were performed by varying the engine speed between 1000 and 4000 rpm with 500 rpm period at threefourth throttle opening position. The results showed that brakespecific fuel consumption increased while brake thermal efficiency, emissions of carbon monoxide (CO and hydrocarbon (HCs decreased with methanol-unleaded gasoline and ethanol-unleaded gasoline blends. It was found that a 10% blend of ethanol or methanol with unleaded gasoline works well in the existing design of engine and parameters at which engines are operating.

  14. Effects of Waste Plastic Oil Blends on a Multi Cylinder Spark Ignition Engine

    Directory of Open Access Journals (Sweden)

    Vijaya Kumar Kareddula

    2017-01-01

    Full Text Available Existing fossil fuels are utilizing at their critical rate, leads to depletion of their reserves in a dramatic way. Generating alternative energy sources in a pragmatic way are necessitated, which demands the researchers to utilize the inherent energy of carbon based products as an energy source to the automobile sector. As a part of it, my research is focused on transforming and using the waste plastics as an alternative fuel in multi cylinder spark ignition engine. This paper aims to present the experimental investigations of performance and emission characteristics in an existing Maruti 800 petrol engine running with the blends of 5%, 10%, 15% and 20% of waste Plastic Pyrolysis Oil (PPO with gasoline. From the results, it is noticed that hydrocarbon emissions are substantially reduced and oxides of nitrogen emissions are increased and petrol engine can operate with PPO blends up to 20% without any engine modifications.

  15. Comparison of Waste Heat Recovery from the Exhaust of a Spark Ignition and a Diesel Engine

    Science.gov (United States)

    Wojciechowski, K. T.; Schmidt, M.; Zybala, R.; Merkisz, J.; Fuć, P.; Lijewski, P.

    2010-09-01

    We present herein a design for and performance measurements of a prototype thermoelectric generator (TEG) mounted on both a spark ignition engine (0.9 dm3) and a self-ignition engine (1.3 dm3). Using the prototype TEG as a tool, benchmark studies were performed in order to compare its parameters in terms of heat recovery from exhaust gases of both engine types. The test bed study was performed with an Automex AMX-210/100 eddy-current brake dynamometer. To provide a comprehensive overview of the TEG operating conditions, characterization of its parameters such as temperature distribution, heat flux density, and efficiency was done at engine speeds and loads similar to those within the range of operation of real road conditions.

  16. Onboard Hydrogen Generation for a Spark Ignition Engine via Thermochemical Recuperation

    Science.gov (United States)

    Silva, Isaac Alexander

    A method of exhaust heat recovery from a spark-ignition internal combustion engine was explored, utilizing a steam reforming thermochemical reactor to produce a hydrogen-rich effluent, which was then consumed in the engine. The effects of hydrogen in the combustion process have been studied extensively, and it has been shown that an extension of the lean stability limit is possible through hydrogen enrichment. The system efficiency and the extension of the operational range of an internal combustion engine were explored through the use of a methane fueled naturally aspirated single cylinder engine co-fueled with syngas produced with an on board methane steam reformer. It was demonstrated that an extension of the lean stability limit is possible using this system.

  17. Numerical Simulation of a Spark Ignited Two-Stroke Free-Piston Engine Generator

    Institute of Scientific and Technical Information of China (English)

    MAO Jin-long; ZUO Zheng-xing; LIU Dong

    2009-01-01

    A numerical program is built to simulate the performance of a spark ignited two-stroke free-piston engine coupled with a linear generator. The computational model combines a series of dynamic and thermodynamic equations that are solved simultaneously to predict the performances of the engines. The dynamic analysis performed consists of an evaluation of the frictional force and load force introduced by the generator. The thermodynamic analysis used a single zone model to describe the engine's working cycle which includes intake, scavenging, compression, combustion and expansion, and to evaluate the effect of heat transfer based on the first law of thermodynamics and the ideal gas state equation. Because there is no crankshaft, a time based Wiebe equation was used to express the fraction of fuel burned in the combustion. The calculated results were validated by using the experimental data from another research group. The results indicate that the free-piston generator has some advantages over conventional engines.

  18. A model for random cyclic pressure variations in spark-ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Chandrashekar, T.K. [Sri Siddhartha Inst. of Technology, Karnataka (India); Antony, A.J. [Sahyadri Inst. of Technology, Mangalore, Karnataka (India)

    2009-07-01

    Cycle-by-cycle (CBC) variation of mean effective pressure in spark ignition engines is always greater than in compression ignition engines and needs to be reduced for better drivability, reduced emissions and increased power output. This study examined the parameters affecting CBC fluctuation and how to reduce the fluctuations. The paper presented two newly developed models designed to simulate the engine combustion process and CBC fluctuation. The mathematical model was outlined in detail with particular reference to model development; the statistical model for CBC fluctuation; and experimental setup. The model was found to be physically realistic and correctly predicted the cyclic variation of pressure to provide fundamental insight into the processes. The combustion model also took the effects of heat transfer and friction into consideration. 7 refs., 1 tab., 14 figs., 1 appendix.

  19. Performance and emissions analysis on using acetone–gasoline fuel blends in spark-ignition engine

    Directory of Open Access Journals (Sweden)

    Ashraf Elfasakhany

    2016-09-01

    Full Text Available In this study, new blended fuels were formed by adding 3–10 vol. % of acetone into a regular gasoline. According to the best of the author's knowledge, it is the first time that the influence of acetone blends has been studied in a gasoline-fueled engine. The blended fuels were tested for their energy efficiencies and pollutant emissions using SI (spark-ignition engine with single-cylinder and 4-stroke. Experimental results showed that the AC3 (3 vol.% acetone + 97 vol.% gasoline blended fuel has an advantage over the neat gasoline in exhaust gases temperature, in-cylinder pressure, brake power, torque and volumetric efficiency by about 0.8%, 2.3%, 1.3%, 0.45% and 0.9%, respectively. As the acetone content increases in the blends, as the engine performance improved where the best performance obtained in this study at the blended fuel of AC10. In particular, exhaust gases temperature, in-cylinder pressure, brake power, torque and volumetric efficiency increase by about 5%, 10.5%, 5.2%, 2.1% and 3.2%, respectively, compared to neat gasoline. In addition, the use of acetone with gasoline fuel reduces exhaust emissions averagely by about 43% for carbon monoxide, 32% for carbon dioxide and 33% for the unburnt hydrocarbons. The enhanced engine performance and pollutant emissions are attributed to the higher oxygen content, slight leaning effect, lower knock tendency and high flame speeds of acetone, compared to the neat gasoline. Finally the mechanism of acetone combustion in gasoline-fueled engines is proposed in this work; two main pathways for acetone combustion are highlighted; furthermore, the CO, CO2 and UHC (unburnt hydrocarbons mechanisms of formation and oxidation are acknowledged. Such acetone mechanism is employed for further understanding acetone combustion in spark-ignition engines.

  20. Efficiency and exhaust gas analysis of variable compression ratio spark ignition engine fuelled with alternative fuels

    Directory of Open Access Journals (Sweden)

    N. Seshaiah

    2010-09-01

    Full Text Available Considering energy crises and pollution problems today, investigations have been concentrated on decreasing fuel consumption by using alternative fuels and on lowering the concentration of toxic components in combustion products. In the present work, the variable compression ratio spark ignition engine designed to run on gasoline has been tested with pure gasoline, LPG (Isobutene, and gasoline blended with ethanol 10%, 15%, 25% and 35% by volume. Also, the gasoline mixed with kerosene at 15%, 25% and 35% by volume without any engine modifications has been tested and presented the result. Brake thermal and volumetric efficiency variation with brake load is compared and presented. CO and CO2 emissions have been also compared for all tested fuels.

  1. Adaptive Control Strategy for Dual–Fuel Stationary Spark Ignition Engines

    Directory of Open Access Journals (Sweden)

    Adrian Irimescu

    2011-10-01

    Full Text Available Fuel availability is an issue that will become ever more important in the future. Therefore, fuel systems will be required to ensure proper operation with a variety of fuel types. The main idea of this study is to develop a control strategy that ensures high fuel conversion efficiency and low emissions levels when employing dual–fuel operation in a micro–cogeneration installation powered by a spark ignition engine. Biogas was considered as the main fuel, while liquid fuel is used to compensate for eventual variations in the gaseous fuel flow. Stoichiometric air-fuel ratio is required at all times so that a three way catalytic converter can be used to simultaneously reduce carbon monoxide, unburned hydrocarbon and nitrogen oxide emissions.

  2. "Simultaneous measurement of flame impingement and piston surface temperatures in an optically accessible spark ignition engine"

    Science.gov (United States)

    Ding, Carl-Philipp; Honza, Rene; Böhm, Benjamin; Dreizler, Andreas

    2017-04-01

    This paper shows the results of spatially resolved temperature measurements of the piston surface of an optically accessible direct injection spark ignition engine during flame impingement. High-speed thermographic phosphor thermometry (TPT), using Gd3Ga5O12:Cr,Ce, and planar laser-induced fluorescence of the hydroxyl radical (OH-PLIF) were used to investigate the temperature increase and the time and position of flame impingement at the piston surface. Measurements were conducted at two operating cases and showed heating rates of up to 16,000 K/s. The OH-PLIF measurements were used to localize flame impingement and calculate conditioned statistics of the temperature profiles. The TPT coating was characterized and its influence on the temperature measurements evaluated.

  3. Simulation and validation of spark ignition engine performance on E85

    Energy Technology Data Exchange (ETDEWEB)

    Varde, Keshav V. [Michigan Univ., Dearborn (United States)

    2013-06-01

    Alcohol based fuels have been promoted as alternatives to gasoline to power light-duty vehicles. One of the fuels that has received significant attention and has been used in limited number of spark ignition (SI) engines is E85, a blend of 85% ethanol and 15% gasoline. The fuel has several attractive properties that make it suitable for use in SI engines. But E85 has low energy content and high heat of vaporization which can potentially impact engine performance at low temperatures. One of the ways to evaluate engine performance at low coolant temperatures is through experimentation; however, simulation of engine combustion processes through well-developed models could help alleviate costly experimental tests. In this work an experimental study was conducted to evaluate performance of an automotive type, 4-cylinder spark ignition engine operating on E85. The port fuel injected engine was operated at stoichiometric condition at light loads and low coolant temperatures, conditions similar to those experienced during engine warm-up. The E85 performance was compared with the performance of the engine when operated on unleaded gasoline (EO). The exhaust hydrocarbon emissions in E85 fueled engine exhaust contained acetaldehyde and methane. For identical operating conditions the acetaldehyde emissions increased as the coolant temperature was reduced or EGR rates were increased. The methane levels in the engine exhaust were generally higher with E85 than those found in unleaded gasoline; they also increased with reduction in coolant temperature. The thermal efficiency of the engine on E85 was comparable to that measured with unleaded gasoline. In addition, a simulation model was used to predict SI engine performance when operating on E85. The model, based on GT-Power, was calibrated using cylinder pressure Vs crank angle data collected when the engine was operating on unleaded gasoline. The calibrated model, with appropriate modifications, was used to predict fuel

  4. Studies on exhaust emissions of catalytic coated spark ignition engine with adulterated gasoline.

    Science.gov (United States)

    Muralikrishna, M V S; Kishor, K; Venkata Ramana Reddy, Ch

    2006-04-01

    Adulteration of automotive fuels, especially, gasoline with cheaper fuels is widespread throughout south Asia. Some adulterants decrease the performance and life of the engine and increase the emission of harmful pollutants causing environmental and health problems. The present investigation is carried out to study the exhaust emissions from a single cylinder spark ignition (SI) engine with kerosene blended gasoline with different versions of the engine, such as conventional engine and catalytic coated engine with different proportions of the kerosene ranging from 0% to 40% by volume in steps of 10% in the kerosene-gasoline blend. The catalytic coated engine used in the study has copper coating of thickness 400 microns on piston and inner surface of the cylinder head. The pollutants in the exhaust, carbon monoxide (CO) and unburnt hydrocarbons (UBHC) are measured with Netel Chromatograph CO and HC analyzer at peak load operation of the engine. The engine is provided with catalytic converter with sponge iron as a catalyst to control the pollutants from the exhaust of the engine. An air injection is also provided to the catalytic converter to further reduce the pollutants. The pollutants found to increase drastically with adulterated gasoline. Copper-coated engine with catalytic converter significantly reduced pollutants, when compared to conventional engine.

  5. Analysis of an Increase in the Efficiency of a Spark Ignition Engine Through the Application of an Automotive Thermoelectric Generator

    Science.gov (United States)

    Merkisz, Jerzy; Fuc, Pawel; Lijewski, Piotr; Ziolkowski, Andrzej; Galant, Marta; Siedlecki, Maciej

    2016-08-01

    We have analyzed the increase of the overall efficiency of a spark ignition engine through energy recovery following the application of an automotive thermoelectric generator (ATEG) of our own design. The design of the generator was developed following emission investigations during vehicle driving under city traffic conditions. The measurement points were defined by actual operation conditions (engine speed and load), subsequently reproduced on an engine dynamometer. Both the vehicle used in the on-road tests and the engine dynamometer were fit with the same, downsized spark ignition engine (with high effective power-to-displacement ratio). The thermodynamic parameters of the exhaust gases (temperature and exhaust gas mass flow) were measured on the engine testbed, along with the fuel consumption and electric current generated by the thermoelectric modules. On this basis, the power of the ATEG and its impact on overall engine efficiency were determined.

  6. Artificial neural network applications in the calibration of spark-ignition engines: An overview

    Directory of Open Access Journals (Sweden)

    Richard Fiifi Turkson

    2016-09-01

    Full Text Available Emission legislation has become progressively tighter, making the development of new internal combustion engines very challenging. New engine technologies for complying with these regulations introduce an exponential dependency between the number of test combinations required for obtaining optimum results and the time and cost outlays. This makes the calibration task very expensive and virtually impossible to carry out. The potential use of trained neural networks in combination with Design of Experiments (DoE methods for engine calibration has been a subject of research activities in recent times. This is because artificial neural networks, compared with other data-driven modeling techniques, perform better in satisfying a majority of the modeling requirements for engine calibration including the curse of dimensionality; the use of DoE for obtaining few measurements as practicable, with the aim of reducing engine calibration costs; the required flexibility that allows model parameters to be optimized to avoid overfitting; and the facilitation of automated online optimization during the engine calibration process that eliminates the need for user intervention. The purpose of this review is to give an overview of the various applications of neural networks in the calibration of spark-ignition engines. The identified and discussed applications include system identification for rapid prototyping, virtual sensing, use of neural networks as look-up table surrogates, emerging control strategies and On-Board Diagnostic (OBD applications. The demerits of neural networks, future possibilities and alternatives were also discussed.

  7. Efficiency characteristics of a new quasi-constant volume combustion spark ignition engine

    Directory of Open Access Journals (Sweden)

    Dorić Jovan Ž.

    2013-01-01

    Full Text Available A zero dimensional model has been used to investigate the combustion performance of a four cylinder petrol engine with unconventional piston motion. The main feature of this new spark ignition (SI engine concept is the realization of quasi-constant volume (QCV during combustion process. Presented mechanism is designed to obtain a specific motion law which provides better fuel consumption of internal combustion (IC engines. These advantages over standard engine are achieved through synthesis of unconventional piston mechanism. The numerical calculation was performed for several cases of different piston mechanism parameters, compression ratio and engine speed. Calculated efficiency and power diagrams are plotted and compared with performance of ordinary SI engine. The results show that combustion during quasi-constant volume has significant impact on improvement of efficiency. The main aim of this paper is to find a proper kinematics parameter of unconventional piston mechanism for most efficient heat addition in SI engines.[Acknowledgment. This research was done as a part of project TR31046 "Improvement of the quality of tractors and mobile systems with the aim of increasing competitiveness and preserving soil and environment", supported by Serbian Ministry of Science and Technological Development.

  8. Numerical investigation of natural gas direct injection properties and mixture formation in a spark ignition engine

    Directory of Open Access Journals (Sweden)

    Yadollahi Bijan

    2014-01-01

    Full Text Available In this study, a numerical model has been developed in AVL FIRE software to perform investigation of Direct Natural Gas Injection into the cylinder of Spark Ignition Internal Combustion Engines. In this regard two main parts have been taken into consideration, aiming to convert an MPFI gasoline engine to direct injection NG engine. In the first part of study multi-dimensional numerical simulation of transient injection process, mixing and flow field have been performed via three different validation cases in order to assure the numerical model validity of results. Adaption of such a modeling was found to be a challenging task because of required computational effort and numerical instabilities. In all cases present results were found to have excellent agreement with experimental and numerical results from literature. In the second part, using the moving mesh capability the validated model has been applied to methane Injection into the cylinder of a Direct Injection engine. Five different piston head shapes along with two injector types have been taken into consideration in investigations. A centrally mounted injector location has been adapted to all cases. The effects of injection parameters, combustion chamber geometry, injector type and engine RPM have been studied on mixing of air-fuel inside cylinder. Based on the results, suitable geometrical configuration for a NG DI Engine has been discussed.

  9. Heat transfer comparison between methane and hydrogen in a spark ignited engine

    Energy Technology Data Exchange (ETDEWEB)

    Sierens, Roger; Demuynck, Joachim; Paepe, Michel de; Verhelst, Sebastian [Ghent Univ. (Belgium)

    2010-07-01

    Hydrogen is one of the alternative fuels which are being investigated at Ghent University. NO{sub x} emissions will occur at high engine loads and they are a constraint for power and efficiency optimization. The formation of NO{sub x} emissions is temperature dependent. Consequently, the heat transfer from the burning gases to the cylinder walls has to be accurately modelled if precise computer calculations of the emissions are wanted. Several engine heat transfer models exist but they have been cited to be inaccurate for hydrogen. We have measured the heat flux in a spark ignited engine with a commercially available heat flux sensor. This paper investigates the difference between the heat transfer of hydrogen and a fossil fuel, in this case methane. Measurements with the same indicated power output are compared and the effect of the heat loss on the indicated efficiency is investigated. The power output of hydrogen combustion is lowered by burning lean in contrast to using a throttle in the case of methane. Although the peak in the heat flux of hydrogen is 3 times higher compared to methane for a high engine power output, the indicated efficiency is only 3% lower. The heat loss for hydrogen at a low engine load is smaller than that of methane which results in a higher indicated efficiency. The richness of the hydrogen-air mixture has a great influence on the heat transfer process in contrast to the in-cylinder mass in the case of methane. (orig.)

  10. Modeling of Transient Heat Flux in Spark Ignition Engine During Combustion and Comparisons with Experiment

    Directory of Open Access Journals (Sweden)

    T. F. Yusaf

    2005-01-01

    Full Text Available A quasi-one dimensional engine cycle simulation program was developed to predict the transient heat flux during combustion in a spark ignition engine. A two-zone heat release model was utilized to model the combustion process inside the combustion chamber. The fuel, air and burned gas properties throughout the engine cycle were calculated using variable specific heats. The transient heat flux inside the combustion chamber due to the change in the in-cylinder gas temperature and pressure during combustion was determined using the Woschni heat transfer model. The program was written in MATLAB together with the Graphical User Interface (GUI. Numerical results were compared with the experimental measurements and good agreement was obtained. Four thermocouples were used and positioned equi-spaced at 5mm intervals along a ray from the spark plug location on the engine head. These thermocouples were able to capture the heat flux release by the burned gas to the wall during the combustion process including the cycle-to-cycle variations. Pressure sensor was installed at the engine head to capture the pressure change throughout the cycle.

  11. Determination of knock characteristics in spark ignition engines: an approach based on ensemble empirical mode decomposition

    Science.gov (United States)

    Li, Ning; Yang, Jianguo; Zhou, Rui; Liang, Caiping

    2016-04-01

    Knock is one of the major constraints to improve the performance and thermal efficiency of spark ignition (SI) engines. It can also result in severe permanent engine damage under certain operating conditions. Based on the ensemble empirical mode decomposition (EEMD), this paper proposes a new approach to determine the knock characteristics in SI engines. By adding a uniformly distributed and finite white Gaussian noise, the EEMD can preserve signal continuity in different scales and therefore alleviates the mode-mixing problem occurring in the classic empirical mode decomposition (EMD). The feasibilities of applying the EEMD to detect the knock signatures of a test SI engine via the pressure signal measured from combustion chamber and the vibration signal measured from cylinder head are investigated. Experimental results show that the EEMD-based method is able to detect the knock signatures from both the pressure signal and vibration signal, even in initial stage of knock. Finally, by comparing the application results with those obtained by short-time Fourier transform (STFT), Wigner-Ville distribution (WVD) and discrete wavelet transform (DWT), the superiority of the EEMD method in determining knock characteristics is demonstrated.

  12. Experimental cross-correlation nitrogen Q-branch CARS thermometry in a spark ignition engine

    Science.gov (United States)

    Lockett, R. D.; Ball, D.; Robertson, G. N.

    2013-07-01

    A purely experimental technique was employed to derive temperatures from nitrogen Q-branch Coherent Anti-Stokes Raman Scattering (CARS) spectra, obtained in a high pressure, high temperature environment (spark ignition Otto engine). This was in order to obviate any errors arising from deficiencies in the spectral scaling laws which are commonly used to represent nitrogen Q-branch CARS spectra at high pressure. The spectra obtained in the engine were compared with spectra obtained in a calibrated high pressure, high temperature cell, using direct cross-correlation in place of the minimisation of sums of squares of residuals. The technique is demonstrated through the measurement of air temperature as a function of crankshaft angle inside the cylinder of a motored single-cylinder Ricardo E6 research engine, followed by the measurement of fuel-air mixture temperatures obtained during the compression stroke in a knocking Ricardo E6 engine. A standard CARS programme (SANDIA's CARSFIT) was employed to calibrate the altered non-resonant background contribution to the CARS spectra that was caused by the alteration to the mole fraction of nitrogen in the unburned fuel-air mixture. The compression temperature profiles were extrapolated in order to predict the auto-ignition temperatures.

  13. EXPERIMENTAL INVESTIGATION OF COLD START EMISSIONS USING ELECTRICALLY HEATED CATALYSTS IN A SPARK IGNITION ENGINE

    Directory of Open Access Journals (Sweden)

    K. Bhaskar

    2010-12-01

    Full Text Available The population of spark-ignition vehicles in urban areas is very high and is increasing rapidly due to their convenience for short distance transportation. These vehicles are major sources of urban air pollution compared to vehicles with diesel engines. Catalytic converters are used to control their emissions but they attain their maximum conversion rates of about 80%¬–90% under optimum operating conditions and are not effective during cold start conditions. The objective of the present work is to demonstrate that an electrically heated catalyst (EHC in combination with a traditional converter can achieve the Low and Ultra Low Emission Vehicle (LEV, ULEV standards. Experiments were conducted to investigate the impact of various metal oxides in EHC and design parameters to reduce cold-start emissions of a multi-cylinder SI engine. It is observed that EHC reduces cold-start hydrocarbon and carbon monoxide emissions when used with an existing catalytic converter. The maximum CO and HC reductions were achieved with copper oxide as the catalyst in EHC with air injection of 80 lpm for 40 sec after cold start of the engine.

  14. FUEL EFFECTS ON COMBUSTION WITH EGR DILUTION IN SPARK IGNITED ENGINES

    Energy Technology Data Exchange (ETDEWEB)

    Szybist, James P [ORNL

    2016-01-01

    The use of EGR as a diluent allows operation with an overall stoichiometric charge composition, and the addition of cooled EGR results in well-understood thermodynamic benefits for improved fuel consumption. This study investigates the effect of fuel on the combustion and emission response of EGR dilution in spark ignited engines. A 2.0 L GM Ecotec LNF engine equipped with the production side-mounted direct injection (DI) fueling system is used in this study. Ethanol, isooctane and certified gasoline are investigated with EGR from 0% to the EGR dilution tolerance. Constant BMEP at 2000 rpm was operated with varying CA50 from 8 CAD to 16 CAD aTDCf. The results show that ethanol gives the largest EGR tolerance at a given combustion phasing, engine load and speed. The improved EGR dilution tolerance with ethanol is attributed to a faster flame speed, which manifests itself as shorter combustion duration. Data shows that the combustion stability limit occurs at a critical combustion duration that is fuel independent. Due to different flame speeds, this critical combustion duration occurs at different EGR levels for the different fuels.

  15. ANALYSIS OF HYDROCARBON TREATING SYSTEM TO THE EMISSION OFF SPARK-IGNITION FOUR-STROKE ENGINE

    Directory of Open Access Journals (Sweden)

    Binyamin Binyamin

    2016-08-01

    Full Text Available The reduction of carbon monoxide (CO, unburnthydrocarbon (UHC emission and fuel consumption on spark-ignition four-stroke engine is continuously attempted. The purposes from this research were to determine the effect of Hydrocarbon Treating System (HTS  on levels of CO, UHC and fuel consumption. This is an experimental research. Its is conducted by comparing the exhaust pollutant concentration such as carbon monoxide, unburnt hydrocarbon and also fuel consumption between standard engine setting and Hydrocarbon Treating System applied. The research variable are HTS flow rate from Q1 = 0 cc/s (without HTS, Q2 = 1,5 cc/s, Q3 = 2 cc/s, Q4 = 2,5 cc/s, and Q5 = 33 cc/s. The research will be done in three conditions which are low, medium and high rotation. The result showed that Hydrocarbon Threating System decrease fuel consumption up to 19,43% with flow rate Q5 = 3 cc/s, but on the other hand it increase CO emission up to 80.84% with flow rate Q5 = 3 cc/s and UHC emission level up to 124.75% with flow rate Q5 = 3 cc/s from engine standart condition.

  16. Investigations on the effects of ethanol–methanol–gasoline blends in a spark-ignition engine: Performance and emissions analysis

    OpenAIRE

    Ashraf Elfasakhany

    2015-01-01

    This study discusses performance and exhaust emissions from spark-ignition engine fueled with ethanol–methanol–gasoline blends. The test results obtained with the use of low content rates of ethanol–methanol blends (3–10 vol.%) in gasoline were compared to ethanol–gasoline blends, methanol–gasoline blends and pure gasoline test results. Combustion and emission characteristics of ethanol, methanol and gasoline and their blends were evaluated. Results showed that when the vehicle was fueled wit...

  17. Investigations on the effects of ethanol–methanol–gasoline blends in a spark-ignition engine: Performance and emissions analysis

    OpenAIRE

    Ashraf Elfasakhany

    2015-01-01

    This study discusses performance and exhaust emissions from spark-ignition engine fueled with ethanol–methanol–gasoline blends. The test results obtained with the use of low content rates of ethanol–methanol blends (3–10 vol.%) in gasoline were compared to ethanol–gasoline blends, methanol–gasoline blends and pure gasoline test results. Combustion and emission characteristics of ethanol, methanol and gasoline and their blends were evaluated. Results showed that when the vehicle was fueled wit...

  18. Improving the performance and fuel consumption of dual chamber stratified charge spark ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Sorenson, S.C.; Pan, S.S.; Bruckbauer, J.J.; Gehrke, G.R.

    1979-09-01

    A combined experimental and theoretical investigation of the nature of the combustion processes in a dual chamber stratified charge spark ignition engine is described. This work concentrated on understanding the mixing process in the main chamber gases. A specially constructed single cylinder engine was used to both conduct experiments to study mixing effects and to obtain experimental data for the validation of the computer model which was constructed in the theoretical portion of the study. The test procedures are described. Studies were conducted on the effect of fuel injection timing on performance and emissions using the combination of orifice size and prechamber to main chamber flow rate ratio which gave the best overall compromise between emissions and performance. In general, fuel injection gave slightly higher oxides of nitrogen, but considerably lower hydrocarbon and carbon monoxide emissions than the carbureted form of the engine. Experiments with engine intake port redesign to promote swirl mixing indicated a substantial increase in the power output from the engine and, that an equivalent power levels, the nitric oxide emissions are approximately 30% lower with swirl in the main chamber than without swirl. The development of a computer simulation of the combustion process showed that a one-dimensional combustion model can be used to accurately predict trends in engine operation conditions and nitric oxide emissions even though the actual flame in the engine is not completely one-dimensional, and that a simple model for mixing of the main chamber and prechamber intake gases at the start of compression proved adequate to explain the effects of swirl, ignition timing, overall fuel air ratio, volumetric efficiency, and variations in prechamber air fuel ratio and fuel rate percentage on engine power and nitric oxide emissions. (LCL)

  19. Structure and disposition of particles from a spark-ignition engine

    Science.gov (United States)

    Steiner, D.; Burtscher, H.; Gross, H.

    Particles generated in the exhaust of a spark-ignition engine operated with leaded and unleaded fuel exhibit significant changes of size, structure and surface chemical composition on changing the temperature T of the carrier gas. Total mass, mass of black carbon (BC), diameter and the photoelectric yield of the particles have been measured in situ as a function of temperature. Concomitantly the particles have also been deposited on a substrate and imaged by transmission electron microscopy. Diameter and total mass of the particles decrease significantly with increasing T, whereas the BC mass remains nearly unaffected. From diameter and photoyield vs T curve a shell structure of the particles emerges, where the outermost shell is made up of volatile organic components followed by a layer of polycyclic aromatic hydrocarbons (PAHs) with less volatility on a core of BC and, depending on the type of fuel, also lead. Transmission electron micrographs indicate that lead and carbonaceous fractions segregate at T = 275°C. For T > 275°C and almost perfect crystalline order of lead appears.

  20. Developing a Knock Predictive Criterion in Spark Ignition Engines Fuelled with Gaseous Fuels

    Institute of Scientific and Technical Information of China (English)

    G.A.Karim

    1993-01-01

    Consideration of the chemical reaction activity of the end gas in a spark ignition and operating conditions are combined to predict the onset of knock and associated performance in an engine fuelled with methane.A two-zone predictive combustion model was developed based on an estimate of the effective duration of the combustion period and the mass burning rate for any set of operating conditions.The unburned end gas preignition chemical reaction activity is described by a detailed chemical reaction kinetic scheme for methane and air,The variation with time of the value of a formulated dimensionless knock parameter(k)is calcuated.It is shown that whenever knocking is encounteren.the value of “k” builds up to a sufficiently high value that exceeds a critical value.Under normal operating conditions,the value of “k” remains throughout the whole combustion period at comparatively very low levels.It is shown that the model and the use of this knock criterion“k” produce results that are in good agreement with experiment.

  1. Cycle-to-cycle fluctuation of combustion in a spark-ignition engine; Hibana tenka engine no nensho hendo

    Energy Technology Data Exchange (ETDEWEB)

    Hamamoto, Y.; Yoshiyama, S.; Tomita, E.; Hamagami, T. [Okayama University, Okayama (Japan); Otsubo, H. [Yammer Diesel Engine Co. Ltd. Tokyo (Japan)

    1997-10-01

    In a homogeneous charge spark-ignition engine, the duration of early stage of combustion is a dominant factor for determining the fluctuation of mean effective pressure. And the early stage of combustion varies with the equivalence ratio and turbulence characteristics of the mixture. In this study, the fluctuations of 1% combustion duration and indicated mean effective pressure Pmi were computed as the function of fluctuations both in the equivalence ratio {phi} of the mixture and in the turbulence characteristics of the cylinder charge. And effects of the spark timing {theta}ig and {phi} on the cycle-to-cycle fluctuation in Pmi were investigated. 16 refs., 6 figs.

  2. Devices to improve the performance of a conventional two-stroke spark ignition engine

    Science.gov (United States)

    Poola, R. B.; Nagalingam, B.; Gopalakrishnan, K. V.

    1995-08-01

    This paper presents research efforts made in three different phases with the objective of improving the fuel economy of and reducing exhaust emissions from conventional, carbureted, two-stroke spark ignition (SI) engines, which are widely employed in two-wheel transportation in India. A review concerning the existing two-stroke engine technology for this application is included. In the first phase, a new scavenging system was developed and tested to reduce the loss of fresh charge through the exhaust port. In the second phase, the following measures were carried out to improve the combustion process: (1) using an in-cylinder catalyst, such as copper, chromium, and nickel, in the form of coating; (2) providing moderate thermal insulation in the combustion chamber, either by depositing thin ceramic material or by metal inserts; (3) developing a high-energy ignition system; and (4) employing high-octane fuel, such as methanol, ethanol, eucalyptus oil, and orange oil, as a blending agent with gasoline. Based on the effectiveness of the above measures, an optimized design was developed in the final phase to achieve improved performance. Test results indicate that with an optimized two-stroke SI engine, the maximum percentage improvement in brake thermal efficiency is about 31%, together with a reduction of 3400 ppm in hydrocarbons (HC) and 3% by volume of carbon monoxide (CO) emissions over the normal engine (at 3 kW, 3000 rpm). Higher cylinder peak pressures (3-5 bar), lower ignition delay (2-4 degrees CA), and shorter combustion duration (4-10 degrees CA) are obtained. The knock-limited power output is also enhanced by 12.7% at a high compression ratio (CR) of 9:1. The proposed modifications in the optimized design are simple, low-cost, and easy to adopt for both production and existing engines.

  3. Analysis of biomass and waste gasification lean syngases combustion for power generation using spark ignition engines.

    Science.gov (United States)

    Marculescu, Cosmin; Cenuşă, Victor; Alexe, Florin

    2016-01-01

    The paper presents a study for food processing industry waste to energy conversion using gasification and internal combustion engine for power generation. The biomass we used consisted in bones and meat residues sampled directly from the industrial line, characterised by high water content, about 42% in mass, and potential health risks. Using the feedstock properties, experimentally determined, two air-gasification process configurations were assessed and numerically modelled to quantify the effects on produced syngas properties. The study also focused on drying stage integration within the conversion chain: either external or integrated into the gasifier. To comply with environmental regulations on feedstock to syngas conversion both solutions were developed in a closed system using a modified down-draft gasifier that integrates the pyrolysis, gasification and partial oxidation stages. Good quality syngas with up to 19.1% - CO; 17% - H2; and 1.6% - CH4 can be produced. The syngas lower heating value may vary from 4.0 MJ/Nm(3) to 6.7 MJ/Nm(3) depending on process configuration. The influence of syngas fuel properties on spark ignition engines performances was studied in comparison to the natural gas (methane) and digestion biogas. In order to keep H2 molar quota below the detonation value of ⩽4% for the engines using syngas, characterised by higher hydrogen fraction, the air excess ratio in the combustion process must be increased to [2.2-2.8]. The results in this paper represent valuable data required by the design of waste to energy conversion chains with intermediate gas fuel production. The data is suitable for Otto engines characterised by power output below 1 MW, designed for natural gas consumption and fuelled with low calorific value gas fuels.

  4. Some aspects of the CI engine modification aimed at operation on LPG with the application of spark ignition

    Science.gov (United States)

    Kaparuk, J.; Luft, S.; Skrzek, T.; Wojtyniak, M.

    2016-09-01

    A lot of investigation on modification of the compression ignition engine aimed at operation on LPG with the application of spark ignition has been carried out in the Laboratory of Vehicles and Combustion Engines at Kazimierz Pulaski University of Technology and Humanities in Radom. This paper presents results of investigation on establishment of the proper ignition advance angle in the modified engine. Within the framework of this investigation it was assessed the effect of this regulation on basic engine operating parameters, exhaust emission as well as basic combustion parameters.

  5. Qualification of numerical software. Application to a Software for analyzing combustion in spark-ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Guilain, S. (Agence de l' Environnement et de la Maitrise de l' Energie, 75 - Paris (France) Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France) Ecole Nationale Superieure du Petrole et des Moteurs (ENSPM), 92 - Rueil-Malmaison (France)); Vignes, J. (Paris-6 Univ., 75 (France) Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France))

    For analyzing physical phenomena, numerical simulation is used more and more frequently. Starting with a mathematical model describing the phenomenon being analyzed, this simulation consists in creating a scientific computing program expressing this model by implementing the numerical methods required for solving it. Simulation is considered to be valid when the results its provides are in agreement with the results issuing from experimenting with the phenomenon. However, these results contain a computing error resulting from the propagation of round-off errors caused by the floating-point arithmetic used by the computer. They also contain an error coming from the uncertainties concerning the data of the problem. The first part of this paper concerns the validation of numerical software results. After making a brief review of the floating-point arithmetic and highlighting the serious consequences it may have on the results obtained, a probabilistic approach to the analysis of round-off errors, the CESTAC (Controle et Estimation STochastique des Arrondis de Calculs) method, from the standpoint of both its theoretical bases and its practical implementation is described. The second part is devoted to the use of the CADNA software (Control of Accuracy and Debugging for Numerical Applications) for qualifying the simulation software, ANALCO (ANALyse de COmbustion) which analyses combustion in spark-ignition engines. After a description of the normal model of the phenomenon being analyzed and after mathematical model has been deduced, the ANALCO simulation software is described. The results obtained with ANALCO, not using CADNA, reveal the disagreement between the simulation results and the experimental results. The use of the CADNA software eliminates the numerical instabilities and demonstrates that the disagreement between the simulation results and the results observed is due only to numerical problems. (author). 22 refs., 21 figs., 10 tabs.

  6. Cycle Engine Modelling Of Spark Ignition Engine Processes during Wide-Open Throttle (WOT) Engine Operation Running By Gasoline Fuel

    Science.gov (United States)

    Rahim, M. F. Abdul; Rahman, M. M.; Bakar, R. A.

    2012-09-01

    One-dimensional engine model is developed to simulate spark ignition engine processes in a 4-stroke, 4 cylinders gasoline engine. Physically, the baseline engine is inline cylinder engine with 3-valves per cylinder. Currently, the engine's mixture is formed by external mixture formation using piston-type carburettor. The model of the engine is based on one-dimensional equation of the gas exchange process, isentropic compression and expansion, progressive engine combustion process, and accounting for the heat transfer and frictional losses as well as the effect of valves overlapping. The model is tested for 2000, 3000 and 4000 rpm of engine speed and validated using experimental engine data. Results showed that the engine is able to simulate engine's combustion process and produce reasonable prediction. However, by comparing with experimental data, major discrepancy is noticeable especially on the 2000 and 4000 rpm prediction. At low and high engine speed, simulated cylinder pressures tend to under predict the measured data. Whereas the cylinder temperatures always tend to over predict the measured data at all engine speed. The most accurate prediction is obtained at medium engine speed of 3000 rpm. Appropriate wall heat transfer setup is vital for more precise calculation of cylinder pressure and temperature. More heat loss to the wall can lower cylinder temperature. On the hand, more heat converted to the useful work mean an increase in cylinder pressure. Thus, instead of wall heat transfer setup, the Wiebe combustion parameters are needed to be carefully evaluated for better results.

  7. Wavelet analysis of cyclic variability in a spark ignition engine powered by gasoline-hydrogen fuel blends

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Asok K. [Richard G. Lugar Centre for Renewable Energy, and Department of Mathematical Sciences, Indiana University, (United States)], email: asen@iupui.edu; Akif Ceviz, M.; Volkan Oner, I. [Department of Mechanical Engineering, University of Ataturk (Turkey)], email: aceviz@atauni.edu.tr

    2011-07-01

    The cycle-to-cycle variations (CCV) of the indicated mean effective pressure (IMEP) in a spark ignition engine fuelled by gasoline and gasoline-hydrogen blends is investigated. CCVs are estimated by using the coefficient of variation (COV) and the overall spectral power given by the global wavelet spectrum (GWS). It was found that the addition of hydrogen reduces the CCV of the IMEP. Analysis of the wavelet can also identify the dominant modes of variability and delineate the engine cycles over which these modes can persist. Air-fuel ratio was varied from 1.0 to 1.3, and hydrogen was added up to 7.74% by volume. The engine was operated at 2000 rpm. Results demonstrate that subject to air-fuel ratio and % of hydrogen added, IMEP time series can exhibit multiscale dynamics consisting of persistent oscillations and intermittent fluctuations. These results can help develop effective control strategies to reduce cyclic variability in a spark ignition engine fuelled by gasoline-hydrogen mixtures.

  8. Effect of Equivalence Ratio on Composition and performance of Biogas and Gasoline Exhaust from Spark Ignition Engine by Mathematical Modeling

    Directory of Open Access Journals (Sweden)

    Juntarakod Paramust

    2016-01-01

    Full Text Available This paper presents the numerical computationnal of pressure, temperature and exhaust characteristics of spark ignition engine with biogas as fuel. The solution of non-linear combustion equation systems have been computed, that based on a quasi-one-dimensional engine model, high order iteration method with the equilibrium constants method. Computer program was used to calculate the mole fractions of 10 combustion products when biogas and gasoline fuel are burnt along with variable equivalence ratios. In cylinder chamber model is based on the classical two-zone approach, wherein parameters like heat transfer from the cylinder, blow by energy loss and heat release rate are also considered and calculated. Biogas is defined as fuel produced from using anaerobic digestion of biodegradable or waste materials and the constituents are C5H7O2N, CH4, CO2 N2 H2O of biogas and C7H17 of gosoline. Which general fuel model is specified by way of its CaHbOcNd values. The curve-fitted coefficients of energy were then employed to simulate air and fuels data along with frozen composition and practical chemical equilibrium routines from Gill data. The calculated data were used to plot the various pressure and temperature with the crank angle of each step of four stroke engine cycle and combustion products versus equivalence ratio. All results were compared with gasoline as reference fuel in the spark ignition engine according to the same numerical method.

  9. Development of laser-induced fluorescence for precombustion diagnostics in spark-ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Neij, H.

    1998-11-01

    Motivated by a desire to understand and optimize combustion in spark-ignition (SI) engines, laser techniques have been developed for measurement of fuel and residual gas, respectively, in the precombustion mixture of an operating SI engine. The primary objective was to obtain two-dimensional, quantitative data in the vicinity of the spark gap at the time of ignition. A laser-induced fluorescence (LIF) technique was developed for fuel visualization in engine environments. Since the fluorescence signal from any commercial gasoline fuel would be unknown to its origin, with an unpredictable dependence on collisional partners, pressure and temperature, a non-fluorescent base fuel - isooctane - was used. For LIF detection, a fluorescent species was added to the fuel. An additive not commonly used in this context - 3-pentanone - was chosen based on its suitable vaporization characteristics and fluorescent properties. The LIF technique was applied to an optically accessible research engine. By calibration, the fluorescence signal from the additive was converted to fuel-to-air equivalence ratio ({phi}). The accuracy and precision of the acquired data were assessed. A statistical evaluation revealed that the spatially averaged equivalence ratio around the spark plug had a significant impact on the combustion event. The strong correlation between these two quantities suggested that the early combustion was sensitive to large-scale inhomogeneities in the precombustion mixture. A similar LIF technique, using acetone as a fluorescent additive in methane, was applied to a combustion cell for ion current evaluation. The local equivalence ratio around the spark gap at the time of ignition was extracted from LIF data. Useful relations were identified between different ion current parameters and the local equivalence ratio, although the impact of the flow field, the fuel type, and the electrode geometry were identified as areas for future research. A novel fuel - dimethyl ether (DME

  10. Development of laser-induced fluorescence for precombustion diagnostics in spark-ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Neij, H.

    1998-11-01

    Motivated by a desire to understand and optimize combustion in spark-ignition (SI) engines, laser techniques have been developed for measurement of fuel and residual gas, respectively, in the precombustion mixture of an operating SI engine. The primary objective was to obtain two-dimensional, quantitative data in the vicinity of the spark gap at the time of ignition. A laser-induced fluorescence (LIF) technique was developed for fuel visualization in engine environments. Since the fluorescence signal from any commercial gasoline fuel would be unknown to its origin, with an unpredictable dependence on collisional partners, pressure and temperature, a non-fluorescent base fuel - isooctane - was used. For LIF detection, a fluorescent species was added to the fuel. An additive not commonly used in this context - 3-pentanone - was chosen based on its suitable vaporization characteristics and fluorescent properties. The LIF technique was applied to an optically accessible research engine. By calibration, the fluorescence signal from the additive was converted to fuel-to-air equivalence ratio ({phi}). The accuracy and precision of the acquired data were assessed. A statistical evaluation revealed that the spatially averaged equivalence ratio around the spark plug had a significant impact on the combustion event. The strong correlation between these two quantities suggested that the early combustion was sensitive to large-scale inhomogeneities in the precombustion mixture. A similar LIF technique, using acetone as a fluorescent additive in methane, was applied to a combustion cell for ion current evaluation. The local equivalence ratio around the spark gap at the time of ignition was extracted from LIF data. Useful relations were identified between different ion current parameters and the local equivalence ratio, although the impact of the flow field, the fuel type, and the electrode geometry were identified as areas for future research. A novel fuel - dimethyl ether (DME

  11. DEVELOPING OF A NEW COMPREHENSIVE SPARK IGNITION ENGINES CODE FOR HEAT LOSS ANALYSIS WITHIN COMBUSTION CHAMBER WALLS

    Directory of Open Access Journals (Sweden)

    Shahram Khalilarya

    2010-01-01

    Full Text Available The objective of this work is to develop the existing a zero-dimensional model named ODES to provide detailed insights into the internal process of the modern high speed spark ignition engines. Therefore, it has been concentrated on the development of new sub models for incorporation in an extended form of ODES, as follows: - the existing semi-empirical combustion model has been replaced by a new comprehensive model, which is based on the turbulent flame speed in the combustion chamber. - the existing three wall heat transfer model has been replaced by a new one in which, the combustion chamber is divided in to three zones including cylinder head, cylinder wall, and piston head. The steady-state heat transfer equation is solved through finite difference method with replaced boundary and initial conditions. The results gave the temperature distribution of combustion chamber walls. The rate of heat losses from combustion chamber to the coolant is calculated by using the mean temperature of each part. The code has been extensively validated with respect to performance and heat transfer against experimental results obtained on XU7JP spark ignition engine with two kinds of fuel, gasoline and compresed natural gas and gave good agreement with available experimental.

  12. Report on Investigation of Alcohol Combustion Associated Wear in Spark Ignition Engines, Mechanisms and Lubricant Effects.

    Science.gov (United States)

    1984-12-01

    Combustion Associated Wear in Spark-Ignition Enzines 12. PERSONAL AUTHORISI INaegeli, David N. and Owens, Edwin C. 131. TYPE OF REPORT 13b. TIME COVERED 114...READINESS CMD ATTN: STEYP-MLS-M (MR DOEBBLER) I -. ATTN: AMSAR-LEM 1 YUMA AZ 85364 ROCK ISLAND ARSENAL IL 61299 PROJ MGR, BRADELY FIGHTING - CDR...CHIEF OF NAVAL RESEARCH CDR ATTN: CODE 473 1 DAVID TAYLOR NAVAL SHIP R&D CTR ARLINGTON VA 22217 ATTN: CODE 2830 (MR G BOSMAJIAN) 1 CODE 2705.1 (MR

  13. Research of combustion in older generation spark-ignition engines in the condition of use leaded and unleaded petrol

    Directory of Open Access Journals (Sweden)

    Bulatović Željko M.

    2014-01-01

    Full Text Available This paper analyzes the potential problems in the exploitation of the older generation of spark-ignition engines with higher octane number of petrol (unleaded petrol BMB 95 than required (leaded petrol MB 86. Within the experimental tests on two different engines (STEYR-PUCH model 712 and GAZ 41 by applying piezoelectric pressure sensors integrated with the engine spark plugs, acceleration sensors (accelerometers and special electronic block connected with distributor, show that the cumulative first and second theoretical phase of combustion when petrol of higher octane number (BMB 95 is used lasts slightly longer than when the low-octane petrol MB 86 is used. For new petrol (BMB 95 higher optimal angles of pre-ignition have been determined by which better performances of the engine are achieved without a danger of the combustion with detonation (also called knocking.

  14. Estimation of operational parameters for a direct injection turbocharged spark ignition engine by using regression analysis and artificial neural network

    Directory of Open Access Journals (Sweden)

    Tosun Erdi

    2017-01-01

    Full Text Available This study was aimed at estimating the variation of several engine control parameters within the rotational speed-load map, using regression analysis and artificial neural network techniques. Duration of injection, specific fuel consumption, exhaust gas at turbine inlet, and within the catalytic converter brick were chosen as the output parameters for the models, while engine speed and brake mean effective pressure were selected as independent variables for prediction. Measurements were performed on a turbocharged direct injection spark ignition engine fueled with gasoline. A three-layer feed-forward structure and back-propagation algorithm was used for training the artificial neural network. It was concluded that this technique is capable of predicting engine parameters with better accuracy than linear and non-linear regression techniques.

  15. Exhaust Emissions Measured Under Real Traffic Conditions from Vehicles Fitted with Spark Ignition and Compression Ignition Engines

    Science.gov (United States)

    Merkisz, Jerzy; Lijewski, Piotr; Fuć, Paweł

    2011-06-01

    The tests performed under real traffic conditions provide invaluable information on the relations between the engine parameters, vehicle parameters and traffic conditions (traffic congestion) on one side and the exhaust emissions on the other. The paper presents the result of road tests obtained in an urban and extra-urban cycles for vehicles fitted with different engines, spark ignition engine and compression ignition engine. For the tests a portable emission analyzer SEMTECH DS. by SENSORS was used. This analyzer provides online measurement of the concentrations of exhaust emission components on a vehicle in motion under real traffic conditions. The tests were performed in city traffic. A comparative analysis has been presented of the obtained results for vehicles with individual powertrains.

  16. CONVERSION OF DIESEL ENGINE INTO SPARK IGNITION ENGINE TO WORK WITH CNG AND LPG FUELS FOR MEETING NEW EMISSION NORMS

    Directory of Open Access Journals (Sweden)

    Syed Kaleemuddin

    2010-01-01

    Full Text Available Fluctuating fuel prices and associated pollution problems of largely exploited petroleum liquid fuel has stimulated the research on abundantly available gaseous fuels to keep the mobility industry intact. In the present work an air cooled diesel engine was modified suitably into a spark ignition engine incorporating electronic ignition and variable speed dependant spark timing to accommodate both LPG and CNG as fuels. Engine was optimized for stoichiometric operation on engine dynamometer. Materials of a few intricate engine components were replaced to suit LPG and CNG application. Ignition timing was mapped to work with gaseous fuels for different speeds. Compensation was done for recovering volumetric efficiency when operated with CNG by introducing more volume of air through resonator. Ignition timing was observed to be the pertinent parameter in achieving good performance with gaseous fuels under consideration. Performance and emission tests were carried out on engine dynamometer and chassis dynamometer. Under wide open throttle and at rated speed condition, it was observed that the peak pressure with LPG was lying between diesel fuel and CNG fuel operation due to slow burning nature of gaseous fuels. As compression ratio was maintained same for LPG and CNG fuel operation, low CO emissions were observed with LPG where as HC + NOx emissions were lower with CNG fuel operation. Chassis dynamometer based emission tests yielded lower CO2 levels with CNG operation.

  17. Extension of the lean limit through hydrogen enrichment of a LFG-fueled spark-ignition engine and emissions reduction

    Energy Technology Data Exchange (ETDEWEB)

    Kornbluth, Kurt; Greenwood, Jason; McCaffrey, Zach; Vernon, David; Erickson, Paul [Mechanical and Aerospace Engineering Department, UC Davis, CA 95616 (United States)

    2010-02-15

    In this experimental investigation the affect of hydrogen addition to a landfill gas-fueled naturally-aspirated spark-ignition engine was explored. Hydrogen concentrations of 0%, 30%, 40%, and 50% by volume were added to simulated landfill gas (60% CH{sub 4} and 40% CO{sub 2}). Efficiency, coefficient of variance of indicated mean effective pressure, and CO emissions were measured from near stoichiometric mixtures up to the lean operating limit. Engine-out NOx emissions were compared to predicted future best available control technology targets for NOx emissions in landfill gas-to-energy projects. From this study, it was determined that with 40% hydrogen by volume untreated exhaust NOx emissions can meet the 0.22 g/kWh NOx target while retaining 95% of baseline power and low CO emissions. (author)

  18. A Soft Sensor-Based Fault-Tolerant Control on the Air Fuel Ratio of Spark-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Yu-Jia Zhai

    2017-01-01

    Full Text Available The air/fuel ratio (AFR regulation for spark-ignition (SI engines has been an essential and challenging control problem for engineers in the automotive industry. The feed-forward and feedback scheme has been investigated in both academic research and industrial application. The aging effect can often cause an AFR sensor fault in the feedback loop, and the AFR control performance will degrade consequently. In this research, a new control scheme on AFR with fault-tolerance is proposed by using an artificial neural network model based on fault detection and compensation, which can provide the satisfactory AFR regulation performance at the stoichiometric value for the combustion process, given a certain level of misreading of the AFR sensor.

  19. The Application of High Energy Ignition and Boosting/Mixing Technology to Increase Fuel Economy in Spark Ignition Gasoline Engines by Increasing EGR Dilution Capability

    Energy Technology Data Exchange (ETDEWEB)

    Keating, Edward [General Motors LLC, Pontiac, MI (United States); Gough, Charles [General Motors LLC, Pontiac, MI (United States)

    2015-07-07

    This report summarizes activities conducted in support of the project “The Application of High Energy Ignition and Boosting/Mixing Technology to Increase Fuel Economy in Spark Ignition Gasoline Engines by Increasing EGR Dilution Capability” under COOPERATIVE AGREEMENT NUMBER DE-EE0005654, as outlined in the STATEMENT OF PROJECT OBJECTIVES (SOPO) dated May 2012.

  20. Modelling and simulation of four-cycle spark ignition engines; Modelado y simulacion de motores de encendido por chispa de cuatro tiempos

    Energy Technology Data Exchange (ETDEWEB)

    Morea-Roy, Jesus F.; Munoz, Mariano; Moreno, Francisco; Gonzalez, Alfredo [Zaragoza Univ. (Spain). Centro Politecnico Superior. Lab. de Analisis de Motores

    1996-07-01

    A multi zone thermodynamic modeling is presented that has been used to predict the behaviour in a spark ignition engine. Modeling includes blow by, gas exchange processes, heat transfer and a deep analysis of the gas composition as well as thermodynamical and transport properties. The combustion process is characterized by experimental adjustment of empirical laws. (author)

  1. Sensitivity and Effect of Ignition Timing on the Performance of a Spark Ignition Engine: An Experimental and Modeling Study

    Directory of Open Access Journals (Sweden)

    A. H. Kakaee

    2011-01-01

    Full Text Available The performance of a spark ignition engine is investigated under different values of ignition advance. A two-zone burnt/unburned model with the fuel burning rate described by a Wiebe function is used for modeling in-cylinder combustion, and then experiments are carried out to validate the calculated data. By varying the ignition timing, the results of some characteristics such as power, torque, thermal efficiency, pressure, and heat release are obtained and compared. The results show that optimal power and torque are achieved at 31°CA before top dead center, and performance is decreased if this ignition timing is changed. It is also shown that the maximum thermal efficiency is accomplished when peak pressure occurs between 5 and 15°CA after top dead center.

  2. A High-Speed Motion-Picture Study of Normal Combustion, Knock and Preignition in a Spark-Ignition Engines

    Science.gov (United States)

    Rothrock, A M; Spencer, R C; Miller, Cearcy D

    1941-01-01

    Combustion in a spark-ignition engine was investigated by means of the NACA high-speed motion-picture cameras. This camera is operated at a speed of 40,000 photographs a second and therefore makes possible the study of changes that take place in the intervals as short as 0.000025 second. When the motion pictures are projected at the normal speed of 16 frames a second, any rate of movement shown is slowed down 2500 times. Photographs are presented of normal combustion, of combustion from preignitions, and of knock both with and without preignition. The photographs of combustion show that knock may be preceded by a period of exothermic reaction in the end zone that persists for a time interval of as much as 0.0006 second. The knock takes place in 0.00005 second or less.

  3. Spark ignition engine performance and emissions in a high compression engine using biogas and methane mixtures without knock occurrence

    Directory of Open Access Journals (Sweden)

    Gómez Montoya Juan Pablo

    2015-01-01

    Full Text Available With the purpose to use biogas in an internal combustion engine with high compression ratio and in order to get a high output thermal efficiency, this investigation used a diesel engine with a maximum output power 8.5 kW, which was converted to spark ignition mode to use it with gaseous fuels. Three fuels were used: Simulated biogas, biogas enriched with 25% and 50% methane by volume. After conversion, the output power of the engine decreased by 17.64% when using only biogas, where 7 kW was the new maximum output power of the engine. The compression ratio was kept at 15.5:1, and knocking did not occur during engine operation. Output thermal efficiency operating the engine in SI mode with biogas enriched with 50% methane was almost the same compared with the engine running in diesel-biogas dual mode at full load and was greater at part loads. The dependence of the diesel pilot was eliminated when biogas was used in the engine converted in SI mode. The optimum condition of experiment for the engine without knocking was using biogas enriched with 50% methane, with 12 degrees of spark timing advance and equivalence ratio of 0.95, larger output powers and higher values of methane concentration lead the engine to knock operation. The presence of CO2 allows operating engines at high compression ratios with normal combustion conditions. Emissions of nitrogen oxides, carbon monoxide and unburnt methane all in g/kWh decreased when the biogas was enriched with 50% methane.

  4. MOTIONS STUDY OF A SINGLE CYLINDER HIGH SPEED SPARK IGNITION LINIER ENGINE WITH SPRING SYSTEM AS RETURN CYCLE

    Directory of Open Access Journals (Sweden)

    A. Z.M. Fathallah

    2014-01-01

    Full Text Available A single cylinder two stroke spark ignition conventional engine have been modified to linier engine with spring mechanism. Before develop the design of linear engine is necessary to analysis of motion. Although principle of combustion process in combustion chamber is the same in fact the oscillation movement is different. Simulation technique has been adopted to study both linear and conventional engine. 3D engines model have been simulate of the motion. Due to simulate both engines, three different tools have been used. Solid works has been used to design, assembly and motion analysis of engine models. However, pressure dynamics have been simulating by GT-Power. Spread sheet has been used to optimize geometry of spring. Spring force and friction force are including components of dynamic and gas dynamic models. Three results have been conducted such as comparison in basic motion (displacement, velocity and acceleration between conventional and linear engine, effect spring design on motion of piston movement and effect friction of piston ring and journal bearing on the motion characteristics of linear engine. The simulation shows clear different motion characteristics between conventional and linear engine. The effect of spring design on motion characteristics is very strong. The friction between ring piston with cylinder liner and journal bearing with rod influenced of piston movement. However, it need modified the design of spring mechanism.

  5. 77 FR 20388 - California State Nonroad Engine Pollution Control Standards; Large Spark-Ignition (LSI) Engines...

    Science.gov (United States)

    2012-04-04

    ... America (``A4A''). A4A comments that California's LSI regulations as applicable to airport ground support.... Other Issues Airlines for America (``A4A'') has provided comments opposing EPA's grant of authorization for California's LSI regulations. The reasons A4A provides in its comments are outside the scope...

  6. Investigation of emissions characteristics of secondary butyl alcohol-gasoline blends in a port fuel injection spark ignition engine

    Directory of Open Access Journals (Sweden)

    Yusri I.M.

    2017-01-01

    Full Text Available Exhaust emissions especially from light duty gasoline engine are a major contributor to air pollution due to the large number of vehicles on the road. The purpose of this study is to experimentally analyse the exhaust pollutant emissions of a four-stroke port fuel spark ignition engines operating using secondary butyl alcohol–gasoline blends by percentage volume of 5% (GBu5, 10% (GBu10 and 15% (GBu15 of secondary butyl- alcohol (2-butanol additives in gasoline fuels at 50% of wide throttle open. The exhaust emissions characteristics of the engine using blended fuels was compared to the exhaust emissions of the engine with gasoline fuels (G100 as a reference fuels. Exhaust emissions analysis results show that all of the blended fuels produced lower CO by 8.6%, 11.6% and 24.8% for GBu5, GBu10 and GBu15 respectively from 2500 to 4000 RPM, while for HC, both GBu10 and GBu15 were lower than that G100 fuels at all engine speeds. In general, when the engine was operated using blended fuels, the engine produced lower CO and HC, but higher CO2.

  7. The Effect of Compression Ratio, Fuel Octane Rating, and Ethanol Content on Spark-Ignition Engine Efficiency.

    Science.gov (United States)

    Leone, Thomas G; Anderson, James E; Davis, Richard S; Iqbal, Asim; Reese, Ronald A; Shelby, Michael H; Studzinski, William M

    2015-09-15

    Light-duty vehicles (LDVs) in the United States and elsewhere are required to meet increasingly challenging regulations on fuel economy and greenhouse gas (GHG) emissions as well as criteria pollutant emissions. New vehicle trends to improve efficiency include higher compression ratio, downsizing, turbocharging, downspeeding, and hybridization, each involving greater operation of spark-ignited (SI) engines under higher-load, knock-limited conditions. Higher octane ratings for regular-grade gasoline (with greater knock resistance) are an enabler for these technologies. This literature review discusses both fuel and engine factors affecting knock resistance and their contribution to higher engine efficiency and lower tailpipe CO2 emissions. Increasing compression ratios for future SI engines would be the primary response to a significant increase in fuel octane ratings. Existing LDVs would see more advanced spark timing and more efficient combustion phasing. Higher ethanol content is one available option for increasing the octane ratings of gasoline and would provide additional engine efficiency benefits for part and full load operation. An empirical calculation method is provided that allows estimation of expected vehicle efficiency, volumetric fuel economy, and CO2 emission benefits for future LDVs through higher compression ratios for different assumptions on fuel properties and engine types. Accurate "tank-to-wheel" estimates of this type are necessary for "well-to-wheel" analyses of increased gasoline octane ratings in the context of light duty vehicle transportation.

  8. Prediction of cold start hydrocarbon emissions of air cooled two wheeler spark ignition engines by simple fuzzy logic simulation

    Directory of Open Access Journals (Sweden)

    Samuel Raja Ayyanan

    2014-01-01

    Full Text Available The cold start hydrocarbon emission from the increasing population of two wheelers in countries like India is one of the research issues to be addressed. This work describes the prediction of cold start hydrocarbon emissions from air cooled spark ignition engines through fuzzy logic technique. Hydrocarbon emissions were experimentally measured from test engines of different cubic capacity, at different lubricating oil temperature and at different idling speeds with and without secondary air supply in exhaust. The experimental data were used as input for modeling average hydrocarbon emissions for 180 seconds counted from cold start and warm start of gasoline bike engines. In fuzzy logic simulation, member functions were assigned for input variables (cubic capacity and idling rpm and output variables (average hydrocarbon emission for first 180 seconds at cold start and warm start. The knowledge based rules were adopted from the analyzed experimental data and separate simulations were carried out for predicting hydrocarbon emissions from engines equipped with and without secondary air supply. The simulation yielded the average hydrocarbon emissions of air cooled gasoline engine for a set of given input data with accuracy over 90%.

  9. Nonlinear torque and air-to-fuel ratio control of spark ignition engines using neuro-sliding mode techniques.

    Science.gov (United States)

    Huang, Ting; Javaherian, Hossein; Liu, Derong

    2011-06-01

    This paper presents a new approach for the calibration and control of spark ignition engines using a combination of neural networks and sliding mode control technique. Two parallel neural networks are utilized to realize a neuro-sliding mode control (NSLMC) for self-learning control of automotive engines. The equivalent control and the corrective control terms are the outputs of the neural networks. Instead of using error backpropagation algorithm, the network weights of equivalent control are updated using the Levenberg-Marquardt algorithm. Moreover, a new approach is utilized to update the gain of corrective control. Both modifications of the NSLMC are aimed at improving the transient performance and speed of convergence. Using the data from a test vehicle with a V8 engine, we built neural network models for the engine torque (TRQ) and the air-to-fuel ratio (AFR) dynamics and developed NSLMC controllers to achieve tracking control. The goal of TRQ control and AFR control is to track the commanded values under various operating conditions. From simulation studies, the feasibility and efficiency of the approach are illustrated. For both control problems, excellent tracking performance has been achieved.

  10. Robust Control of the Air to Fuel Ratio in Spark Ignition Engines with Delayed Measurements from a UEGO Sensor

    Directory of Open Access Journals (Sweden)

    Javier Espinoza-Jurado

    2015-01-01

    Full Text Available A precise control of the normalized air to fuel ratio in spark ignition engines is an essential task. To achieve this goal, in this work we take into consideration the time delay measurement presented by the universal exhaust gas oxygen sensor along with uncertainties in the volumetric efficiency. For that purpose, observers are designed by means of a super-twisting sliding mode estimation scheme. Also two control schemes based on a general nonlinear model and a similar nonlinear affine representation for the dynamics of the normalized air to fuel ratio were designed in this work by using the super-twisting sliding mode methodology. Such dynamics depends on the control input, that is, the injected fuel mass flow, its time derivative, and its reciprocal. The two latter terms are estimated by means of a robust sliding mode differentiator. The observers and controllers are designed based on an isothermal mean value engine model. Numeric and hardware in the loop simulations were carried out with such model, where parameters were taken from a real engine. The obtained results show a good output tracking and rejection of disturbances when the engine is closed loop with proposed control methods.

  11. Study on waste heat recovery from exhaust gas spark ignition (S.I. engine using steam turbine mechanism

    Directory of Open Access Journals (Sweden)

    Talib Kamarulhelmy

    2017-01-01

    Full Text Available The issue of global warming has pushed the effort of researchers not only to find alternative renewable energy, but also to improve the machine’s energy efficiency. This includes the utilization of waste energy into ‘useful energy’. For a vehicle using internal combustion engine (ICE, the waste energy produce by exhaust gas can be utilize to ‘useful energy’ up to 34%. The energy from the automotive exhaust can be harness by implementing heat pipe heat exchanger in the automotive system. In order to maximize the amount of waste energy that can be turned to ‘useful energy’, the used of appropriate fluid in the heat exchanger is important. In this study, the fluid used is water, thus converting the fluid into steam and thus drive the turbine that coupling with generator. The paper will explore the performance of a naturally aspirated spark ignition (S.I. engine equipped with waste heat recovery mechanism (WHRM that used water as the heat absorption medium. The experimental and simulation test suggest that the concept is thermodynamically feasible and could significantly enhance the system performance depending on the load applied to the engine.

  12. Co-Optimization of Fuels & Engines (Co-Optima) Initiative: Recent Progress on Light-Duty Boosted Spark-Ignition Fuels/Engines

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, John

    2017-07-03

    This presentation reports recent progress on light-duty boosted spark-ignition fuels/engines being developed under the Co-Optimization of Fuels and Engines initiative (Co-Optima). Co-Optima is focused on identifying fuel properties that optimize engine performance, independent of composition, allowing the market to define the best means to blend and provide these fuels. However, in support of this, we are pursuing a systematic study of blendstocks to identify a broad range of feasible options, with the objective of identifying blendstocks that can provide target ranges of key fuel properties, identifying trade-offs on consistent and comprehensive basis, and sharing information with stakeholders.

  13. Effect of Operating Conditions on Pollutants Concentration Emitted from a Spark Ignition Engine Fueled with Gasoline Bioethanol Blends

    Directory of Open Access Journals (Sweden)

    Haroun A. K. Shahad

    2015-01-01

    Full Text Available This study is an experimental investigation of the effect of bioethanol gasoline blending on exhaust emissions in terms of carbon dioxide CO2, carbon monoxide CO, unburnt hydrocarbons UHC, and nitric oxide NOx of a spark ignition engine. Tests are conducted at controlled throttle and variable speed condition over the range of 1200 to 2000 rpm with intervals 400 rpm. Different compression ratios are tested for each speed, namely (7,8,10, and 11. Pure gasoline and bioethanol gasoline blends are used. The bioethanol used is produced from Iraqi date crop (Zehdi. Blending is done on energy replacement bases. Ethanol energy ratio (EER used is 5%, 10%, and 15%. At each of the three designated engine speeds, the torque is set as 0, 3, 7, 10, and 14 N·m. It is found that ethanol blending reduces CO and UHC concentration in the exhaust gases by about 45% and 40.15%, respectively, and increases NOx and CO2 concentrations in the exhaust gases by about 16.18% and 7.5%, respectively. It is found also that load and speed increase causes an increase in CO2 and NOx concentrations and reduces CO and UHC concentrations. It is also found that increasing the compression ratio causes the emissions of CO2 and NOx to decrease and those of CO and UHC to increase.

  14. High-speed fuel tracer fluorescence and OH radical chemiluminescence imaging in a spark-ignition direct-injection engine.

    Science.gov (United States)

    Smith, James D; Sick, Volker

    2005-11-01

    An innovative technique has been demonstrated to achieve crank-angle-resolved planar laser-induced fluorescence (PLIF) of fuel followed by OH* chemiluminescence imaging in a firing direct-injected spark-ignition engine. This study used two standard KrF excimer lasers to excite toluene for tracking fuel distribution. The intensified camera system was operated at single crank-angle resolution at 2000 revolutions per minute (RPM) for 500 consecutive cycles. Through this work, it has been demonstrated that toluene and OH* can be imaged through the same optical setup while similar signal levels are obtained from both species, even at these high rates. The technique is useful for studying correlations between fuel distribution and subsequent ignition and flame propagation without the limitations of phase-averaging imaging approaches. This technique is illustrated for the effect of exhaust gas recirculation on combustion and will be useful for studies of misfire causes. Finally, a few general observations are presented as to the effect of preignition fuel distribution on subsequent combustion.

  15. Conversion of a commercial spark ignition engine to run on hydrogen: Performance comparison using hydrogen and gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Sopena, C.; Dieguez, P.M.; Sainz, D.; Urroz, J.C.; Gandia, L.M. [Escuela Tecnica Superior de Ingenieros Industriales y de Telecomunicacion, Universidad Publica de Navarra, Campus de Arrosadia, E-31006 Pamplona (Spain); Guelbenzu, E. [Acciona Biocombustibles S.A., Avenida Ciudad de la Innovacion n 5, E-31621 Sarriguren, Navarra (Spain)

    2010-02-15

    The modifications performed to convert the spark ignition gasoline-fueled internal combustion engine of a Volkswagen Polo 1.4 to run with hydrogen are described. The car is representative of small vehicles widely used for both city and interurban traffic. Main changes included the inlet manifold, gas injectors, oil radiator and the electronic management unit. Injection and ignition advance timing maps were developed for lean mixtures with values of the air to hydrogen equivalence ratio ({lambda}) between 1.6 and 3. The established engine control parameters allowed the safe operation of the hydrogen-fueled engine (H{sub 2}ICE) free of knock, backfire and pre-ignition as well with reasonably low NO{sub x} emissions. The H{sub 2}ICE reached best brake torque of 63 Nm at 3800 rpm and maximum brake power of 32 kW at 5000 rpm. In general, the brake thermal efficiency of the H{sub 2}ICE is greater than that of gasoline-fueled engine except for the H{sub 2}ICE working at very lean conditions ({lambda} = 2.5) and high speeds (above 4000 rpm). A significant effect of the spark advance on the NO{sub x} emissions has been found, specially for relatively rich mixtures ({lambda} < 2). Small changes of spark advance with respect to the optimum value for maximum brake torque give rise to an increase of pollutant emissions. It has been estimated that the hydrogen-fueled Volkswagen Polo could reach a maximum speed of 140 km/h with the adapted engine. Moreover, there is enough reserve of power for the vehicle moving on typical urban routes and routes with slopes up to 10%. (author)

  16. Development of High Efficiency Clean Combustion Engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, Craig; Gonzalez, Manual; Russell, Durrett

    2011-06-30

    This report summarizes activities related to the revised STATEMENT OF PROJECT OBJECTIVES (SOPO) dated June 2010 for the Development of High-Efficiency Clean Combustion engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines (COOPERATIVE AGREEMENT NUMBER DE-FC26-05NT42415) project. In both the spark- (SI) and compression-ignition (CI) development activities covered in this program, the goal was to develop potential production-viable internal combustion engine system technologies that both reduce fuel consumption and simultaneously met exhaust emission targets. To be production-viable, engine technologies were also evaluated to determine if they would meet customer expectations of refinement in terms of noise, vibration, performance, driveability, etc. in addition to having an attractive business case and value. Prior to this activity, only proprietary theoretical / laboratory knowledge existed on the combustion technologies explored The research reported here expands and develops this knowledge to determine series-production viability. Significant SI and CI engine development occurred during this program within General Motors, LLC over more than five years. In the SI program, several engines were designed and developed that used both a relatively simple multi-lift valve train system and a Fully Flexible Valve Actuation (FFVA) system to enable a Homogeneous Charge Compression Ignition (HCCI) combustion process. Many technical challenges, which were unknown at the start of this program, were identified and systematically resolved through analysis, test and development. This report documents the challenges and solutions for each SOPO deliverable. As a result of the project activities, the production viability of the developed clean combustion technologies has been determined. At this time, HCCI combustion for SI engines is not considered production-viable for several reasons. HCCI combustion is excessively sensitive to control variables

  17. Selection Criteria and Screening of Potential Biomass-Derived Streams as Fuel Blendstocks for Advanced Spark-Ignition Engines

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Robert L.; Fioroni, Gina; Fouts, Lisa; Christensen, Earl; Yanowitz, Janet; Polikarpov, Evgueni; Albrecht, Karl; Gaspar, Daniel J.; Gladden, John; George, Anthe

    2017-03-14

    We describe a study to identify potential biofuels that enable advanced spark ignition (SI) engine efficiency strategies to be pursued more aggressively. A list of potential biomass-derived blendstocks was developed. An online database of properties and characteristics of these bioblendstocks was created and populated. Fuel properties were determined by measurement, model prediction, or literature review. Screening criteria were developed to determine if a bioblendstock met the requirements for advanced SI engines. Criteria included melting point (or cloud point) < -10 degrees C and boiling point (or T90) <165 degrees C. Compounds insoluble or poorly soluble in hydrocarbon were eliminated from consideration, as were those known to cause corrosion (carboxylic acids or high acid number mixtures) and those with hazard classification as known or suspected carcinogens or reproductive toxins. Compounds predicted to be less anaerobically biodegradable than methyl-tert-butyl ether with water solubility greater than 10,000 mg/L were also eliminated. A minimum Research octane number (RON) of 98 was applied. These criteria produced a list of 40 bioblendstocks with promising properties. Additional property data, including Motor octane number (MON), heat of vaporization, and lower heating value, were acquired for these bioblendstocks. A subset of the bioblendstocks representing all functional groups were blended into gasoline or a gasoline surrogate to measure their effect on vapor pressure, distillation curve, oxidation stability, RON, and MON. For blending into a conventional or reformulated blendstock for E10 blending, ethanol, 2-butanol, isobutanol, and diisobutylene have the most desirable properties for blending of a high-octane advanced SI engine fuel.

  18. Investigations on the effects of ethanol–methanol–gasoline blends in a spark-ignition engine: Performance and emissions analysis

    Directory of Open Access Journals (Sweden)

    Ashraf Elfasakhany

    2015-12-01

    Full Text Available This study discusses performance and exhaust emissions from spark-ignition engine fueled with ethanol–methanol–gasoline blends. The test results obtained with the use of low content rates of ethanol–methanol blends (3–10 vol.% in gasoline were compared to ethanol–gasoline blends, methanol–gasoline blends and pure gasoline test results. Combustion and emission characteristics of ethanol, methanol and gasoline and their blends were evaluated. Results showed that when the vehicle was fueled with ethanol–methanol–gasoline blends, the concentrations of CO and UHC (unburnt hydrocarbons emissions were significantly decreased, compared to the neat gasoline. Methanol–gasoline blends presented the lowest emissions of CO and UHC among all test fuels. Ethanol–gasoline blends showed a moderate emission level between the neat gasoline and ethanol–methanol–gasoline blends, e.g., ethanol–gasoline blends presented lower CO and UHC emissions than those of the neat gasoline but higher emissions than those of the ethanol–methanol–gasoline blends. In addition, the CO and UHC decreased and CO2 increased when ethanol and/or methanol contents increased in the fuel blends. Furthermore, the effects of blended fuels on engine performance were investigated and results showed that methanol–gasoline blends presents the highest volumetric efficiency and torque; ethanol–gasoline blends provides the highest brake power, while ethanol–methanol–gasoline blends showed a moderate level of volumetric efficiency, torque and brake power between both methanol–gasoline and ethanol–gasoline blends; gasoline, on the other hand, showed the lowest volumetric efficiency, torque and brake power among all test fuels.

  19. Modelling and multi-objective optimization of a variable valve-timing spark-ignition engine using polynomial neural networks and evolutionary algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Atashkari, K. [Department of Mechanical Engineering, Faculty of Engineering, The University of Guilan, P.O. Box 3756, Rasht (Iran, Islamic Republic of); Nariman-Zadeh, N. [Department of Mechanical Engineering, Faculty of Engineering, The University of Guilan, P.O. Box 3756, Rasht (Iran, Islamic Republic of)]. E-mail: nnzadeh@guilan.ac.ir; Goelcue, M. [Department of Mechanical Education, Technical Education faculty, Pamukkale University, 20017 Kinikli, Denizli (Turkey); Khalkhali, A. [Department of Mechanical Engineering, Faculty of Engineering, The University of Guilan, P.O. Box 3756, Rasht (Iran, Islamic Republic of); Jamali, A. [Department of Mechanical Engineering, Faculty of Engineering, The University of Guilan, P.O. Box 3756, Rasht (Iran, Islamic Republic of)

    2007-03-15

    The main reason for the efficiency decrease at part load conditions for four-stroke spark-ignition (SI) engines is the flow restriction at the cross-sectional area of the intake system. Traditionally, valve-timing has been designed to optimize operation at high engine-speed and wide open throttle conditions. Several investigations have demonstrated that improvements at part load conditions in engine performance can be accomplished if the valve-timing is variable. Controlling valve-timing can be used to improve the torque and power curve as well as to reduce fuel consumption and emissions. In this paper, a group method of data handling (GMDH) type neural network and evolutionary algorithms (EAs) are firstly used for modelling the effects of intake valve-timing (V {sub t}) and engine speed (N) of a spark-ignition engine on both developed engine torque (T) and fuel consumption (Fc) using some experimentally obtained training and test data. Using such obtained polynomial neural network models, a multi-objective EA (non-dominated sorting genetic algorithm, NSGA-II) with a new diversity preserving mechanism are secondly used for Pareto based optimization of the variable valve-timing engine considering two conflicting objectives such as torque (T) and fuel consumption (Fc). The comparison results demonstrate the superiority of the GMDH type models over feedforward neural network models in terms of the statistical measures in the training data, testing data and the number of hidden neurons. Further, it is shown that some interesting and important relationships, as useful optimal design principles, involved in the performance of the variable valve-timing four-stroke spark-ignition engine can be discovered by the Pareto based multi-objective optimization of the polynomial models. Such important optimal principles would not have been obtained without the use of both the GMDH type neural network modelling and the multi-objective Pareto optimization approach.

  20. HYDROGEN ADDITION ON COMBUSTION AND EMISSION CHARACTERISTICS OF HIGH SPEED SPARK IGNITION ENGINE- AN EXPERIMENTAL STUDY

    Directory of Open Access Journals (Sweden)

    SHIVAPRASAD K. V.

    2016-11-01

    Full Text Available The present article aims at characterizing the combustion and emission parameters of a single cylinder high speed SI engine operating with different concentrations of hydrogen with gasoline fuel. The conventional carburetted SI engine was modified into an electronically controllable engine, wherein ECU was used to control the injection timings and durations of gasoline. The engine was maintained at a constant speed of 3000 rpm and wide open throttle position. The experimental results demonstrated that heat release rate and cylinder pressure were increased with the addition of hydrogen until 20%. The CO and HC emissions were reduced considerably whereas NOx emission was increased with the addition of hydrogen in comparison with pure gasoline engine operation.

  1. Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas

    Directory of Open Access Journals (Sweden)

    Ramasamy D.

    2016-01-01

    Full Text Available Transportation is one of the key contributors to petroleum usage and emissions to the atmosphere. According to researchers, there are many ways to use transport by using renewable energy sources. Of these solutions, the immediate solution which requires less modification to current engine technology is by using gaseous fuels. Natural gas is the fuel of choice for minor modification to current engines. As it can be derived from anaerobic digestion process, the potential as a renewable energy source is tremendous, especially for an agricultural country such a Malaysia. The aim in the future will be operating an engine with natural gas only with pipelines straight to houses for easy filling. The fuel is light and can be easily carried in vehicles when in compressed form. As such, Compressed Natural Gas (CNG is currently used in bi-fuel engines, but is mostly not optimized in term of their performance. The focus of the paper is to optimize a model of natural gas engine by one dimensional flow modeling for operation with natural gas. The model is analyzed for performance and emission characteristics produced by a gasoline engine and later compared with natural gas. The average performance drop is about 15% from its gasoline counterpart. The 4% benchmark indicates that the modification to ignition timing and compression ratio does improve engine performance using natural gas as fuel.

  2. Experimental investigation of an improved exhaust recovery system for liquid petroleum gas fueled spark ignition engine

    Directory of Open Access Journals (Sweden)

    Gürbüz Habib

    2015-01-01

    Full Text Available In this study, we have investigated the recovery of energy lost as waste heat from exhaust gas and engine coolant, using an improved thermoelectric generator (TEG in a LPG fueled SI engine. For this purpose, we have designed and manufactured a 5-layer heat exchanger from aluminum sheet. Electrical energy generated by the TEG was then used to produce hydrogen in a PEM water electrolyzer. The experiment was conducted at a stoichiometric mixture ratio, 1/2 throttle position and six different engine speeds at 1800-4000 rpm. The results of this study show that the configuration of 5-layer counterflow produce a higher TEG output power than 5-layer parallel flow and 3-layer counterflow. The TEG produced a maximum power of 63.18 W when used in a 5-layer counter flow configuration. This resulted in an improved engine performance, reduced exhaust emission as well as an increased engine speed when LPG fueled SI engine is enriched with hydrogen produced by the PEM electrolyser supported by TEG. Also, the need to use an extra evaporator for the LPG fueled SI engine is eliminated as LPG heat exchangers are added to the fuel line. It can be concluded that an improved exhaust recovery system for automobiles can be developed by incorporating a PEM electrolyser, however at the expense of increasing costs.

  3. Evaluation and Control of Cyclic Variation in Spark Ignited Engines by a Thermodynic Model

    Institute of Scientific and Technical Information of China (English)

    纪常伟; 张红光

    2004-01-01

    An evaluation method of engine cyclic variation is proposed based on fuzzy mathematics concept. The degree of engine cyclic variation is divided into 4 levels: stable, slight variation, moderate variation and serious variation based on the statistic standard deviation of residual gas temperatures within the specified simulation cycles and the function of cyclic variation is also inducted for the cyclic variation control. Because the degree of engine cyclic variation can be estimated qualitatively, the effective control means can be applied to appease the undesired cyclic variation. Simulation result shows that for a very serious cyclic variation through the proper adjustment of the spark angle and the cyclic variation will disappear.

  4. Schlieren-based temperature measurement inside the cylinder of an optical spark ignition and homogeneous charge compression ignition engine.

    Science.gov (United States)

    Aleiferis, Pavlos; Charalambides, Alexandros; Hardalupas, Yannis; Soulopoulos, Nikolaos; Taylor, A M K P; Urata, Yunichi

    2015-05-10

    Schlieren [Schlieren and Shadowgraphy Techniques (McGraw-Hill, 2001); Optics of Flames (Butterworths, 1963)] is a non-intrusive technique that can be used to detect density variations in a medium, and thus, under constant pressure and mixture concentration conditions, measure whole-field temperature distributions. The objective of the current work was to design a schlieren system to measure line-of-sight (LOS)-averaged temperature distribution with the final aim to determine the temperature distribution inside the cylinder of internal combustion (IC) engines. In a preliminary step, we assess theoretically the errors arising from the data reduction used to determine temperature from a schlieren measurement and find that the total error, random and systematic, is less than 3% for typical conditions encountered in the present experiments. A Z-type, curved-mirror schlieren system was used to measure the temperature distribution from a hot air jet in an open air environment in order to evaluate the method. Using the Abel transform, the radial distribution of the temperature was reconstructed from the LOS measurements. There was good agreement in the peak temperature between the reconstructed schlieren and thermocouple measurements. Experiments were then conducted in a four-stroke, single-cylinder, optical spark ignition engine with a four-valve, pentroof-type cylinder head to measure the temperature distribution of the reaction zone of an iso-octane-air mixture. The engine optical windows were designed to produce parallel rays and allow accurate application of the technique. The feasibility of the method to measure temperature distributions in IC engines was evaluated with simulations of the deflection angle combined with equilibrium chemistry calculations that estimated the temperature of the reaction zone at the position of maximum ray deflection as recorded in a schlieren image. Further simulations showed that the effects of exhaust gas recirculation and air

  5. Composite adaptive and input observer-based approaches to the cylinder flow estimation in spark ignition automotive engines

    Energy Technology Data Exchange (ETDEWEB)

    Stotsky, A.; Eriksson, S. [Volvo Car Corporation, Gothenburg (Sweden). Engine Design and Development Dept.; Kolmanovsky, I. [Ford Motor Co., Dearborn, MI (United States)

    2004-07-01

    The performance of air charge estimation algorithms in spark ignition automotive engines can be enhanced using advanced estimation techniques available in the controls literature. This paper illustrates two approaches of this kind that can improve the cylinder flow estimation for gasoline engines without external exhaust gas recirculation (EGR). The first approach is based on an input observer, while the second approach relies on an adaptive estimator. Assuming that the cylinder flow is nominally estimated via a speed-density calculation, and that the uncertainty is additive to the volumetric efficiency, the straightforward application of an input observer provides an easy to implement algorithm that corrects the nominal air flow estimate. The experimental results that we report in the paper point to a sufficiently good transient behaviour of the estimator. The signal quality may deteriorate, however, for extremely fast transients. This motivates the development of an adaptive estimator that relies mostly on the feedforward speed-density calculation during transients, while during engine operation close to steady-state conditions, it relies mostly on the adaptation. In our derivation of the adaptive estimator, the uncertainty is modelled as an unknown parameter multiplying the intake manifold temperature. We use the tracking error between the measured and modelled intake manifold pressure together with an appropriately defined prediction error estimate to develop an adaptation algorithm with improved identifiability and convergence rate. A robustness enhancement, via a {sigma}-modification with the {sigma}-factor depending on the prediction error estimate, ensures that in transients the parameter estimate converges to a predetermined a priori value. In close to steady-state conditions, the {sigma}-modification is rendered inactive and the evolution of the parameter estimate is determined by both tracking error and prediction error estimate. Further enhancements are

  6. Oil Coking Prevention Using Electric Water Pump for Turbo-Charge Spark-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Han-Ching Lin

    2014-01-01

    Full Text Available Turbocharger has been widely implemented for internal combustion engine to increase an engine's power output and reduce fuel consumption. However, its operating temperature would rise to 340°C when engine stalls. This higher temperature may results in bearing wear, run-out, and stick, due to oil coking and insufficient lubrication. In order to overcome these problems, this paper employs Electric Water Pump (EWP to supply cool liquid to turbocharger actively when the engine stalls. The system layout, operating timing, and duration of EWP are investigated for obtaining optimal performance. The primarily experimental results show that the proposed layout and control strategy have a lower temperature of 100°C than the conventional temperature 225°C.

  7. On-board diagnosis of emission control system malfunctions in electronically controlled spark ignition engines

    Energy Technology Data Exchange (ETDEWEB)

    Azzoni, P.M. [ENEA, Bologna (Italy); Rizzoni, G. [Nuclear Materials and Equipment Corp., Apollo, PA (United States). Energy Conversion Div.; Minelli, G. [Bologna Univ. (Italy). Facolta di Ingegneria

    1993-09-01

    This paper discusses simulation and experimental results of a study aimed at diagnosing faults associated with an automotive engine exhaust emissions control system. Parity space methods are applied to a model of the engine intake, fueling, combustion and exhaust dynamics to diagnose faults in sensors and actuators used by the exhaust emissions control system. The results indicate that a mix of linear dynamic and nonlinear static models permit the design of an effective diagnostic strategy.

  8. Fundamental Studies of Ignition Process in Large Natural Gas Engines Using Laser Spark Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Azer Yalin; Bryan Willson

    2008-06-30

    Past research has shown that laser ignition provides a potential means to reduce emissions and improve engine efficiency of gas-fired engines to meet longer-term DOE ARES (Advanced Reciprocating Engine Systems) targets. Despite the potential advantages of laser ignition, the technology is not seeing practical or commercial use. A major impediment in this regard has been the 'open-path' beam delivery used in much of the past research. This mode of delivery is not considered industrially practical owing to safety factors, as well as susceptibility to vibrations, thermal effects etc. The overall goal of our project has been to develop technologies and approaches for practical laser ignition systems. To this end, we are pursuing fiber optically coupled laser ignition system and multiplexing methods for multiple cylinder engine operation. This report summarizes our progress in this regard. A partial summary of our progress includes: development of a figure of merit to guide fiber selection, identification of hollow-core fibers as a potential means of fiber delivery, demonstration of bench-top sparking through hollow-core fibers, single-cylinder engine operation with fiber delivered laser ignition, demonstration of bench-top multiplexing, dual-cylinder engine operation via multiplexed fiber delivered laser ignition, and sparking with fiber lasers. To the best of our knowledge, each of these accomplishments was a first.

  9. Biofuel and Hydrogen Influence for Operation Parameters of Spark Ignition Engine

    Directory of Open Access Journals (Sweden)

    Martynas Damaševičius

    2016-12-01

    Full Text Available Paper presents research of efficient and ecological parameters of gasoline engine working with biobuthanol (10% and 20% by volume and addi-tionaly supplying oxygen and hydrogen (HHO gas mixture (3.6 l/min, which was obtained from from water by electrolysis. Biobuthanol addition decreases rate of heat release, the combustion temperature and pressure are lower, which has an influence on lower nitrous oxide (NOx emission in exhaust gases. However, biobuthanol increases carbon monoxide (CO concentration. Biobuthanol fuel has a simplier molecular structure, therefore the concentration of HC in the exhaust gas is decreasing. Due to lower heating value of biobuthanol fuel and slower combustion process, the engine efficiency decreases and specific fuel consumptions increase. The change of engine energetical indicators due to biobuthanol, can be compensated with advanced ignition angle. Using experimental investigation, it was determined, that negative biobuthanol influence for the combustion process and engine efficient inicators can be compensated also by additional supplied HHO gas, in which the hydrogen element iprove fuel mixture com-bustion. Fuel combustion process analysis was carried out using AVL BOOST software. Experimental research and combustion process numerical simulation showed that using balanced biobuthanol and hydrogen addition, optimal efficient and ecological parameters could be achieved, when engine is working for petrol fuel typical optimal spark timing.

  10. COMBUSTION AND PERFORMANCE CHARACTERISTICS OF A SMALL SPARK IGNITION ENGINE FUELLED WITH HCNG

    Directory of Open Access Journals (Sweden)

    A. SONTHALIA

    2015-04-01

    Full Text Available Due to environmental concerns and fossil fuel depletion, large scale researches were carried out involving the use of natural gas in internal combustion engines. Natural gas is a clean burning fuel that is available from large domestic natural reserve. When it is used as a fuel in SI engines, it reduces emissions to meet EURO-III norms with carburettors and EURO-IV norms with manifold injection. Countries like India with fewer natural fossil fuel reserves depend heavily on oil imported from Middle East Asian countries and on the other hand combustion of fossil fuel has negative impact on air quality in urban areas. Use of CNG as a fuel in internal combustion engines can reduce the intensiveness of these pervasive problems. The performance of CNG can further be improved by addition of small percentages of hydrogen to it to overcome the drawbacks like lower energy density of the fuel, drop in engine power and engine out exhaust emissions. When hydrogen is added to CNG it is called as Hythane or Hydrogen enriched Compressed Natural Gas (HCNG. This can be considered as a first step towards promotion of hydrogen in automobiles. In this study, the effects of mixing hydrogen with CNG on a small air cooled four stroke SI engine’s performance, emissions and heat release rate was analyzed. A comparison of performance and emission by running engine separately on gasoline, hydrogen, CNG and HCNG was done. The results show a significant decrease in HC, CO and NOx emissions and marginal increase in specific energy consumption when fuelled with HCNG.

  11. Investigation of a Spark Ignition Internal Combustion Engine via IR Spectroscopy

    Science.gov (United States)

    Sakai, Stephen; White, Allen R.; Gross, Kevin; Devasher, Rebecca B.

    2010-06-01

    Previous work has shown that the automotive fuel components of isopropanoland ethanol can be excited by a 10.2 um and 9.3 um CO2 lasers, respectively. Through the use of a monochromator and an indium antimonide detector, the decay time of the excited molecules was measured and found to be significantly long enough to allow for the possibility of experimentation in an internal combustion (IC) engine. In order to pursue In Situ measurements in an internal combustion engine, a MegaTech Mark III transparent engine was modified with a sapphire combustion chamber. This modification will allow the transmission of infrared radiation for time-resolved spectroscopic measurements by an infrared spectrometer. By using a Telops FIRST-MWE imaging Fourier transform spectrometer, temporally and spatially resolved infrared spectral data can be acquired and compared for combustion in the engine both with and without laser excitation. Measurements performed with system provide insight into the energy transfer vectors that precede combustion as well as provide an in situ measurement of the progress of combustion.

  12. Exhaust Gas Analysis and Parametric Study of Ethanol Blended Gasoline Fuel in Spark Ignition Engine

    Directory of Open Access Journals (Sweden)

    Jitendra kumar

    2013-07-01

    Full Text Available It is well known that the future availability of energy resources, as well as the need for reducing CO2 emissions from the fuels used has increased the need for the utilization of regenerative fuels. This research is done taking commercial gasoline as reference which is originally blended with 5% ethanol. Hence 5%, 10%, 15%, 20% ethanol blended with Gasoline initially was tested in SI engines. Physical properties relevant to the fuel were determined for the four blends of gasoline. A four cylinder, four stroke, varying rpm, Petrol (MPFI engine was tested on blends containing 5%,10%,15%,20% ethanol and performance characteristics, and exhaust emissions were evaluated. Even though higher blends can replace gasoline in a SI engine, results showed that there is a reduction in exhaust gases, such as HC, O2, CO, CO2 and increase in Brake Thermal Efficiency on blending. Hence we can conclude from the result that using 10% ethanol blend is most effective and we can utilize it for further use in SI engines with little constraint on material used to sustain little increase in pressure.

  13. Combustion parameters of spark ignition engine using waste potato bioethanol and gasoline blended fuels

    Science.gov (United States)

    Ghobadian, B.; Najafi, G.; Abasian, M.; Mamat, R.

    2015-12-01

    The purpose of this study is to investigate the combustion parameters of a SI engine operating on bioethanol-gasoline blends (E0-E20: 20% bioethanol and 80% gasoline by volume). A reactor was designed, fabricated and evaluated for bioethanol production from potato wastes. The results showed that increasing the bioethanol content in the blend fuel will decrease the heating value of the blended fuel and increase the octane number. Combustion parameters were evaluated and analyzed at different engine speeds and loads (1000-5000 rpm). The results revealed that using bioethanol-gasoline blended fuels will increase the cylinder pressure and its 1st and 2nd derivatives (P(θ), P•(θ) and P••(θ)). Moreover, using bioethanol- gasoline blends will increase the heat release (Q•(θ)) and worked of the cycle. This improvement was due to the high oxygen percentage in the ethanol.

  14. Biofuel and Hydrogen Influence for Operation Parameters of Spark Ignition Engine

    OpenAIRE

    Martynas Damaševičius; Alfredas Rimkus; Mindaugas Melaika; Jonas Matijošius

    2016-01-01

    Paper presents research of efficient and ecological parameters of gasoline engine working with biobuthanol (10% and 20% by volume) and addi-tionaly supplying oxygen and hydrogen (HHO) gas mixture (3.6 l/min), which was obtained from from water by electrolysis. Biobuthanol addition decreases rate of heat release, the combustion temperature and pressure are lower, which has an influence on lower nitrous oxide (NOx) emission in exhaust gases. However, biobuthanol increases carbon monoxide (CO) c...

  15. Evaluation of Knock Behavior for Natural Gas - Gasoline Blends in a Light Duty Spark Ignited Engine

    Energy Technology Data Exchange (ETDEWEB)

    Pamminger, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Sevik, James [Argonne National Lab. (ANL), Argonne, IL (United States); Scarcelli, Riccardo [Argonne National Lab. (ANL), Argonne, IL (United States); Wallner, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); Wooldridge, Steven [Ford Motor Co., Detroit, MI (United States); Boyer, Brad [Ford Motor Co., Detroit, MI (United States); Hall, Carrie M. [Illinois Inst. of Technology, Chicago, IL (United States)

    2016-10-17

    The compression ratio is a strong lever to increase the efficiency of an internal combustion engine. However, among others, it is limited by the knock resistance of the fuel used. Natural gas shows a higher knock resistance compared to gasoline, which makes it very attractive for use in internal combustion engines. The current paper describes the knock behavior of two gasoline fuels, and specific incylinder blend ratios with one of the gasoline fuels and natural gas. The engine used for these investigations is a single cylinder research engine for light duty application which is equipped with two separate fuel systems. Both fuels can be used simultaneously which allows for gasoline to be injected into the intake port and natural gas to be injected directly into the cylinder to overcome the power density loss usually connected with port fuel injection of natural gas. Adding natural gas at wide open throttle helps to reduce knock mitigating measures and increases the efficiency and power density compared to the other gasoline type fuels with lower knock resistance. The used methods, knock intensity and number of pressure waves, do not show significant differences in knock behavior for the natural gas - gasoline blends compared to the gasoline type fuels. A knock integral was used to describe the knock onset location of the fuels tested. Two different approaches were used to determine the experimental knock onset and were compared to the knock onset delivered by the knock integral (chemical knock onset). The gasoline type fuels show good agreement between chemical and experimental knock onset. However, the natural gas -gasoline blends show higher discrepancies comparing chemical and experimental knock onset.

  16. On-board diagnostics of fully variable valve actuator systems in spark-ignited combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Sarac, Ipek

    2010-07-01

    Variable valve actuation (VVA) is being employed in contemporary engines to improve fuel consumption, torque characteristics and emissions of combustion engines by enabling the realization of different combustion strategies. Fully variable valve actuation (FVVA) makes it possible to apply a wider range of strategies (e.g., homogenous charge compression ignition (HCCI), dethrottling, internal residual gas mechanism, 2/4 Stroke Switching). With FVVA, the gas exchange valves can be actuated at arbitrary points in time, with separate variable lifting for the intake and exhaust valves of each cylinder. Making FVVA systems ready for the market requires to provide the system with appropriate fault-diagnostic functionality. Additional degrees of freedom of FVVA systems introduce different fault cases which have to be considered in terms of their emission relevance within the scope of diagnostics standards such as On-Board Diagnosis II (OBD II). The faults and their effects on emissions have not been analyzed by any other study, yet. To fill this gab, here the possible faults are generated using a four-cylinder gasoline camless test bench engine. Measurements are carried out using different strategies at low loads, namely dethrottling with early intake valve closing and combining high internal residual gas with dethrottling. Each fault case is thoroughly analyzed, and the emission-relevant faults are pointed out for initial consideration. A trivial approach to diagnose fully variable valve actuators is to introduce position sensors for each actuator to track the valve lift curve. However, this approach increases the cost of the system undesirably. Thus, here alternative methods are explored such as indirect use of common powertrain sensors. Considering that active diagnosis may lead to suboptimal engine control schemes, the possibilities of fault detection and isolation are investigated without relying on active diagnosis. Air path sensors are affected foremost by any

  17. Spark Ignition Characteristics of a L02/LCH4 Engine at Altitude Conditions

    Science.gov (United States)

    Kleinhenz, Julie; Sarmiento, Charles; Marshall, William

    2012-01-01

    The use of non-toxic propellants in future exploration vehicles would enable safer, more cost effective mission scenarios. One promising "green" alternative to existing hypergols is liquid methane/liquid oxygen. To demonstrate performance and prove feasibility of this propellant combination, a 100lbf LO2/LCH4 engine was developed and tested under the NASA Propulsion and Cryogenic Advanced Development (PCAD) project. Since high ignition energy is a perceived drawback of this propellant combination, a test program was performed to explore ignition performance and reliability versus delivered spark energy. The sensitivity of ignition to spark timing and repetition rate was also examined. Three different exciter units were used with the engine s augmented (torch) igniter. Propellant temperature was also varied within the liquid range. Captured waveforms indicated spark behavior in hot fire conditions was inconsistent compared to the well-behaved dry sparks (in quiescent, room air). The escalating pressure and flow environment increases spark impedance and may at some point compromise an exciter s ability to deliver a spark. Reduced spark energies of these sparks result in more erratic ignitions and adversely affect ignition probability. The timing of the sparks relative to the pressure/flow conditions also impacted the probability of ignition. Sparks occurring early in the flow could trigger ignition with energies as low as 1-6mJ, though multiple, similarly timed sparks of 55-75mJ were required for reliable ignition. An optimum time interval for spark application and ignition coincided with propellant introduction to the igniter and engine. Shifts of ignition timing were manifested by changes in the characteristics of the resulting ignition.

  18. Spark Ignition Characteristics of a LO2/LCH4 Engine at Altitude Conditions

    Science.gov (United States)

    Kleinhenz, Julie; Sarmiento, Charles; Marshall, William

    2012-01-01

    The use of non-toxic propellants in future exploration vehicles would enable safer, more cost effective mission scenarios. One promising "green" alternative to existing hypergols is liquid methane/liquid oxygen. To demonstrate performance and prove feasibility of this propellant combination, a 100lbf LO2/LCH4 engine was developed and tested under the NASA Propulsion and Cryogenic Advanced Development (PCAD) project. Since high ignition energy is a perceived drawback of this propellant combination, a test program was performed to explore ignition performance and reliability versus delivered spark energy. The sensitivity of ignition to spark timing and repetition rate was also examined. Three different exciter units were used with the engine's augmented (torch) igniter. Propellant temperature was also varied within the liquid range. Captured waveforms indicated spark behavior in hot fire conditions was inconsistent compared to the well-behaved dry sparks (in quiescent, room air). The escalating pressure and flow environment increases spark impedance and may at some point compromise an exciter.s ability to deliver a spark. Reduced spark energies of these sparks result in more erratic ignitions and adversely affect ignition probability. The timing of the sparks relative to the pressure/flow conditions also impacted the probability of ignition. Sparks occurring early in the flow could trigger ignition with energies as low as 1-6mJ, though multiple, similarly timed sparks of 55-75mJ were required for reliable ignition. An optimum time interval for spark application and ignition coincided with propellant introduction to the igniter and engine. Shifts of ignition timing were manifested by changes in the characteristics of the resulting ignition.

  19. Studies on effect of spark advance angle and spark gap on cycle-by-cycle fluctuations in four stroke spark ignition engine

    Energy Technology Data Exchange (ETDEWEB)

    Bhaskar, H.B.; Chandrasheaker, T.K. [Sri Siddhartha Inst. of Technology, Maralur, Tumkur (India). Dept. of Mechanical Engineering; Antony, A.J. [Sahyedri Inst. of Technology, Mangalore (India)

    2009-07-01

    In response to environmental concerns and the depletion of fossil fuels, the automotive industry is striving to increase fuel efficiency and reduce emissions such as soot and nitrous oxides (NOx). This paper focused on the nature of cyclic variability and its manifestation in the characteristics of spark-ignition (SI) engine combustion. Cycle-by-cycle fluctuation is a major phenomenon that limits the range of operating conditions. The parameters affecting cycle-by-cycle fluctuation include mixture distribution, mixture homogeneity, spark intensity, spark timing, spark plug location, spark plug gap, number of spark plugs, swirl, combustion chamber geometry, compression ratio, equivalence ratio, load and speed. The degree to which these parameters influence cycle-by-cycle fluctuations was investigated. The cycle-by-cycle fluctuations in the engine reduces the power output, but increases the engine roughness and emissions. Experiments were carried out on a four stroke single cylinder computerized spark ignition engine. The results revealed the best operating spark gap and advanced spark angle to minimize the cycle-by-cycle fluctuations. The overall engine performance was improved with better drivability. 6 refs., 3 tabs., 10 figs.

  20. Effects of Fuel Composition on EGR Dilution Tolerance in Spark Ignited Engines

    Energy Technology Data Exchange (ETDEWEB)

    Szybist, James P [ORNL

    2016-01-01

    Fuel-specific differences in exhaust gas recirculation (EGR) dilution tolerance are studied in a modern, direct-injection single-cylinder research engine. A total of 6 model fuel blends are examined at a constant research octane number (RON) of 95 using n-heptane, iso-octane, toluene, and ethanol. Laminar flame speeds for these mixtures, which were calculated two different methods (an energy fraction mixing rule and a detailed kinetic simulation), spanned a range of about 6 cm/s. A constant fueling nominal load of 350 kPa IMEPg at 2000 rpm was operated with varying CA50 from 8-20 CAD aTDCf, and with EGR increasing until a COV of IMEP of 5% is reached. The results illustrate that flame speed affects EGR dilution tolerance; fuels with increased flame speeds increase EGR tolerance. Specifically, flame speed correlates most closely to the initial flame kernel growth, measured as the time of ignition to 5% mass fraction burned. The effect of the latent heat of vaporization on the flame speed is taken into account for the ethanol-containing fuels. At a 30 vol% blend level, the increased enthalpy of vaporization of ethanol compared to conventional hydrocarbons can decrease the temperature at the time of ignition by a maximum of 15 C, which can account for up to a 3.5 cm/s decrease in flame speed. The ethanol-containing fuels, however, still exhibit a flame speed advantage, and a dilution tolerance advantage over the slower flame-speed fuels. The fuel-specific differences in dilution tolerance are significant at the condition examined, allowing for a 50% relative increase in EGR (4% absolute difference in EGR) at a constant COV of IMEP of 3%.

  1. Investigation of Spark Ignition and Autoignition in Methane and Air Using Computational Fluid Dynamics and Chemical Reaction Kinetics. A numerical Study of Ignition Processes in Internal Combustion Engines

    Energy Technology Data Exchange (ETDEWEB)

    Nordrik, R.

    1993-12-01

    The processes in the combustion chamber of internal combustion engines have received increased attention in recent years because their efficiencies are important both economically and environmentally. This doctoral thesis studies the ignition phenomena by means of numerical simulation methods. The fundamental physical relations include flow field conservation equations, thermodynamics, chemical reaction kinetics, transport properties and spark modelling. Special attention is given to the inclusion of chemical kinetics in the flow field equations. Using his No Transport of Radicals Concept method, the author reduces the computational efforts by neglecting the transport of selected intermediate species. The method is validated by comparison with flame propagation data. A computational method is described and used to simulate spark ignition in laminar premixed methane-air mixtures and the autoignition process of a methane bubble surrounded by hot air. The spark ignition simulation agrees well with experimental results from the literature. The autoignition simulation identifies the importance of diffusive and chemical processes acting together. The ignition delay times exceed the experimental values found in the literature for premixed ignition delay, presumably because of the mixing process and lack of information on low temperature reactions in the skeletal kinetic mechanism. Transient turbulent methane jet autoignition is simulated by means of the KIVA-II code. Turbulent combustion is modelled by the Eddy Dissipation Concept. 90 refs., 81 figs., 3 tabs.

  2. Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Safarudin Gazali Herawan

    2016-01-01

    Full Text Available The waste heat from exhaust gases represents a significant amount of thermal energy, which has conventionally been used for combined heating and power applications. This paper explores the performance of a naturally aspirated spark ignition engine equipped with waste heat recovery mechanism (WHRM in a sedan car. The amount of heat energy from exhaust is presented and the experimental test results suggest that the concept is thermodynamically feasible and could significantly enhance the system performance depending on the load applied to the engine. However, the existence of WHRM affects the performance of engine by slightly reducing the power. The simulation method is created using an artificial neural network (ANN which predicts the power produced from the WHRM.

  3. Incorporating in-cylinder pressure data to predict NO{sub x} emissions from spark-ignition engines fueled with landfill gas/hydrogen mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Kornbluth, Kurt; McCaffrey, Zach; Erickson, Paul A. [Department of Mechanical and Aerospace Engineering, University of California, One Shields Avenue, Davis, CA 95616 (United States)

    2009-11-15

    A 0.745 L 2-cylinder spark-ignition engine was operated with compressed natural gas and with simulated landfill gas (60% CH{sub 4} and 40% CO{sub 2} by volume) containing hydrogen concentrations of 0, 30%, 40%, and 50% (by volume of the CH{sub 4} in the fuel) at constant rpm. This empirical data was compared with predictions from three existing semi-empirical engine models, using a first-law-based finite heat release model to correlate measured in-cylinder pressure data and burn rate for each fuel mixture. Of the three models only a two zone model incorporating thermal and prompt NO{sub x} came within 25% of predicting the measured NO{sub x} emissions. (author)

  4. Modelling of a Spark Ignition Engine for Power-Heat Production Optimization Modèle de moteur à allumage commandé en vue de l’optimisation de la production chaleur-force

    OpenAIRE

    Descieux D.; Feidt M.

    2011-01-01

    Spark ignition gas engine is more and more used in order to produce electricity and heat simultaneously. The engine crankshaft drives a synchronous electric generator. The thermal power output is recovered from the engine coolant system and exhaust gas, and is used to produce generally hot water for heating system. In order to have a better adequacy between supply (production of the engine) and user demand, good knowledge of the engine and implemented phenomena are necessary. A generic method...

  5. Injection systems for spark ignition engines within the limits of the optimization of particle emissions and CO{sub 2} optimization; Einspritzsysteme fuer Otto-Motoren im Spannungsfeld zwischen Partikelemissions- und CO{sub 2}-Optimierung

    Energy Technology Data Exchange (ETDEWEB)

    Frenzel, Holger; Roesel, Gerd; Achleitner, Erwin; Baecker, Harald; Tichy, Milos [Continental Automotive GmbH, Regensburg (Germany)

    2011-07-01

    The spark ignition engine is worldwide the dominant driving unit. Due to the excellent ratio between cost and performance the spark ignition engine has to be further developed for the future market requirements like ''fun to drive'', low fuel consumption and stringent emission targets especially low particulate number. To reach these contradictory targets the fuel injection sytem, in particular for DI engines, plays a major role. Fuel metering and spray preparation are the key parameters for further improvement. Continental offers sustainable innovations for DI injection systems. This paper deals with requirements and solutions for gasoline fuel metering. Main functional parameters are discussed on market requirements. This is followed by a system approach. (orig.)

  6. INVESTIGATION OF COMBUSTION, PERFORMANCE AND EMISSION CHARACTERISTICS OF SPARK IGNITION ENGINE FUELLED WITH BUTHANOL – GASOLINE MIXTURE AND A HYDROGEN ENRICHED AIR

    Directory of Open Access Journals (Sweden)

    Alfredas Rimkus

    2016-09-01

    Full Text Available In this study, spark ignition engine fuelled with buthanol-gasoline mixture and a hydrogen-enriched air was investigated. Engine performance, emissions and combustion characteristics were investigated with different buthanol (10% and 20% by volume gasoline mixtures and additionally supplied oxygen and hydrogen (HHO gas mixture (3.6 l/min in the sucked air. Hydrogen, which is in the HHO gas, improves gasoline and gasoline-buthanol mixture combustion, increases indicated pressure during combustion phase and decreases effective specific fuel consumption. Buthanol addition decreases the rate of heat release, the combustion temperature and pressure are lower which have an influence on lower nitrous oxide (NOx emission in exhaust gases. Buthanol lowers hydrocarbon (HC formation, but it increases carbon monoxide (CO concentration and fuel consumption. Combustion process analysis was carried out using AVL BOOST software. Experimental research and combustion process numerical simulation showed that using balanced buthanol and hydrogen addition, optimal efficient and ecological parameters could be achieved when engine is working with optimal spark timing, as it would work on gasoline fuel.

  7. Hydrocarbon raw emission characterization of a direct-injection spark ignition engine operated with alcohol and furan-based bio fuels

    Energy Technology Data Exchange (ETDEWEB)

    Thewes, Matthias [FEV GmbH, Aachen (Germany); Mauermann, Peter; Pischinger, Stefan [RWTH Aachen Univ. (Germany). Inst. for Combustion Engines; Bluhm, Kerstin; Hollert, Henner [RWTH Aachen Univ. (Germany). Inst. for Environmental Research, Dept. of Ecosystem Analysis

    2013-06-01

    Within the Cluster of Excellence ''Tailor-Made Fuels from Biomass'' the impact of various potential bio fuels on engine combustion is studied. Besides alcohols, furan-based bio fuels have come into the focus with novel production routes to transform biomass into 2-Methylfuran or 2,5-Dimethylfuran. In the present study, the influence of these and other bio fuels on the hydrocarbon raw emission spectrum of a direct-injection spark-ignition single cylinder engine is studied experimentally by means of gas chromatographic and mass spectroscopic analysis of exhaust gas samples. The results obtained are compared to operation with conventional EN 228 gasoline fuel. This fuel showed slip of partially carcinogenic aromatic fuel molecule(s) in warm and in cold engine conditions. For the bio fuels, slip was found to be significant for the alcohol fuels. The carcinogenic molecule 1,3-Butadiene was present in the exhaust gas of all fuels. Furan as another possibly carcinogenic molecule was found at significantly higher concentrations in the exhaust gas of the furan-based bio fuels compared to conventional gasoline fuel but not in the exhaust gas of the alcohol fuels. (orig.)

  8. Emission characteristics of iso-propanol/gasoline blends in a spark-ignition engine combined with exhaust gas re-circulation

    Directory of Open Access Journals (Sweden)

    Gong Jing

    2014-01-01

    Full Text Available Experiments were carried out in a spark-ignition engine fueled with iso-propanol/gasoline blends. Emission characteristics of this engine were investigated experimentally, including gaseous emissions (HC, CO, NOx and particulate matter emission in term of number and size distributions. The effects of different iso-propanol percentages, loads and exhaust gas recirculation rates on emissions were analyzed. Results show that the introduction of exhaust gas recirculation reduces the NOx emission and NOx emission gives the highest value at full load condition. HC and CO emissions present inconspicuous variations at all the loads except the load of 10%. Additionally, HC emission shows a sharp increase for pure propanol when the exhaust gas recirculation rate is up to 5%, while little variation is observed at lager exhaust gas recirculation rates. Moreover, the particulate matter number concentration increases monotonically with the increase of load and the decrease of exhaust gas recirculation rate. There exists a critical spark timing that produces the highest particulate matter number concentration at all the blending ratios.

  9. Spectroscoping analysis of ignition in a spark ignition engine with jet-controlled combustion; Spektroskopische Untersuchung der Entflammung an einem Ottomotor mit strahlgefuehrtem Brennverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Palaveev, S. [MOT Forschungs- und Entwicklungsgesellschaft fuer Motorentechnik, Optik und Thermodynamik GmbH, Karlsruhe (Germany); Buri, S.; Xander, B.; Spicher, U. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Kolbenmaschinen

    2007-07-01

    The gasoline direct injection engine is one of the most promising strategies today to reduce the fuel consumption and CO{sub 2}-emissions of spark-ignition engines. The commercial launch of that combustion system was possible only through the development of new optical measurement techniques, which have been a major contribution for understanding the basics of the combustion in a stratified mode. In terms of space and time, compared to the homogeneous approach, the air-fuel-ratio for a stratified mode may vary significantly. This fluctuation affects in a critical way the process of ignition and combustion. The knowledge of the air-fuel-ratio in the spark plug area both at time of ignition and in during the combustion is therefore critical for the development of this combustion system and it components. This paper presents the spark-emission spectroscopy as a non invasive optical technique for measuring the air-fuel-ratio {lambda} in the spark gap at time of ignition. (orig.)

  10. Alcohol fuels in spark ignition engines. Use characteristics and engine wear. Alkoholipolttoaineet ottomoottorissa. Kaeyttoeominaisuudet ja moottorin kuluminen

    Energy Technology Data Exchange (ETDEWEB)

    Nylund, N.-O.; Kytoe, M.; Eklund, T.; Sipilae, K.

    1986-09-01

    A field test with different alcohol fuels was carried out at the Technical Research Centre of Finland in 1981-1984. The test involved 19 passenger cars. The engines of the test vehicles were dismantled both before and after the test. In addition to engine wear, driveability was also studied during the test. Finland's cold climate emphasizes difficulties arising with alcohol fuels. E15/M15 fuels demand only minor adjustment in the fuel systems to restore driveability. E15 fuel was used both in new and old cars and this fuel did not cause any corrosion problems. M15 is a more difficult fuel both in regard to corrosion and fuel stability. None of the test engines showed signs of accelerated wear of the kind that could have shortened the lifetime of the engine considerably. Cylinders, piston rings, earings and valve train were monitored. Temperature has a strong effect on engine wear and the driveability of engines running on neat alcohol have been presented. For these reasons the Research Centre developed, in cooperation with Oy Saab-Valmet Ab, a dual fuel system for gasoline and alcohol. The system is automatic and change-over from gasoline to alcohol takes place at a coolant temperature of 70 deg C. In two series of tests dual fuel cars and cars with a simple fuel system (gasoline as starting aid) were compared regarding engine wear and driveability. The second series of tests involved 2+2 cars. Each car was driven 50,000 km. The driveability of the dual fuel car does not differ from that of a normal gasoline vehicle. Including the portion of gasoline in the main M90 fuel, the part of energy coming gasoline was 30-40%. The cam/tappet mechanism was found critical with regard to wear. In the most severe operating conditions only the dual fuel system can prevent the engine from excessive wear. A very efficient system for preheating the inlet air was used in all neat alcohol test vehicles.

  11. Combustion characteristics of spark ignition and pilot flame ignition systems in a stratified charge Wankel type rotary engine; Sojo kyuki bankerugata rotary kikan ni okeru spark plug tenka to pilot kaen tenka ni yoru nensho tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Song, Y.; Moriyoshi, Y.; Wada, Y. [Chiba University, Chiba (Japan); Muroki, T. [Kanagawa Institute of Technology, Kanagawa (Japan)

    1998-05-25

    A pilot flame ignition system, which has superior characteristics in the high ignition energy and the large flame contact area to a conventional spark ignition system, is experimentally examined by the indicated pressure analysis and the high speed direct photography. A model combustion chamber, which simulates a Wankel-type direct injection stratified charge rotary engine, was employed to test the ignition performance of both the pilot flame ignition and spark ignition systems. As a result, it was found that the pilot flame system successfully ignites the very lean charge stratified mixture which the spark system fails to ignite and that the combustion characteristic difference using different ignition systems becomes small as the overall equivalence ratio is increased. 6 refs., 15 figs., 2 tabs.

  12. The Effect of Various Test Parameters on the Steady Flow Test Results of a Four-Valve Spark Ignition Engine: A Tentative Approach toward Standardization

    Directory of Open Access Journals (Sweden)

    A. Mohammadebrahim

    2013-01-01

    Full Text Available The present paper is an account of an experimental analysis carried out to investigate to what extent the flow characteristics in the intake system of a 4-valve, spark ignition internal combustion engine depend on the experimental conditions at the steady flow test bench. In this respect, the study is aimed at determining the influences of the intake adaptor, test pressure, adaptor length and diameter, adaptor roughness, paddle wheel diameter, and asymmetric valves lifting on the flow coefficient and the swirl intensity measurements. In studies of this kind, researchers generally tend to adopt different test parameters to arrive at a nonuniform base to compare results from several investigations. This work is aimed at verifying the quantitative differences detected using these test parameters. The findings revealed that the swirl intensity depends on the pressure test, adaptor length, and the entry type to a significant degree. Moreover, it was observed that the intake adaptor is the most effective test parameter on the flow coefficient. Finally, the sensitivity analysis has been performed in order to investigate the experimental results and to correlate them with the test parameters.

  13. Evaporate prediction and compensation of intake port wall-wetting fuel film for spark ignition engines fueled with ethanol-gasoline blends

    Institute of Scientific and Technical Information of China (English)

    Dong-wei YAO; Xin-chen LING; Feng WU

    2012-01-01

    The fuel dynamic transfer process,including fuel injection,fuel film deposition and evaporation in the intake port,was analyzed for spark ignition (SI) engines with port fuel injection (PFI).The influence of wall-wetting fuel film,especially its evaporation rate,upon the air-fuel ratio of in-cylinder mixtures was also discussed.According to the similarity principle,Fick's law,the ideal gas equation and the Gilliland correlation,an evaporate prediction model of wall-wetting fuel film was set up and an evaporate prediction based dynamic fuel film compensator was designed.Through engine cold start tests,the wall-wetting temperature,which is the key input of the fuel film evaporate prediction model,was also modeled and predicted.Combined with the experimental data of the evaporation characteristics of ethanol-gasoline blends and engine calibration tests,all the parameters of the wall-wetting fuel film evaporate prediction model used in the fuel film compensator were identified.Square-wave disturbance tests of fuel injection showed that with the help of the fuel film compensator the response of the in-cylinder air-fuel ratio was significantly improved and the real air-fuel ratio always closely matched the expected ratio.The fuel film compensator was then integrated into the final air-fuel ratio controller,and the engine tests showed that the air-fuel ratio control error was less than 2% in steady-state conditions,and less than 4%in transient conditions.The fuel film compensator also showed good adaptability to different ethanol-gasoline blends.

  14. COMBUSTION SIMULATION IN A SPARK IGNITION ENGINE CYLINDER: EFFECTS OF AIR-FUEL RATIO ON THE COMBUSTION DURATION

    OpenAIRE

    2010-01-01

    Combustion is an important subject of internal combustion engine studies. To reduce the air pollution from internal combustion engines and to increase the engine performance, it is required to increase combustion efficiency. In this study, effects of air/fuel ratio were investigated numerically. An axisymmetrical internal combustion engine was modeled in order to simulate in-cylinder engine flow and combustion. Two dimensional transient continuity, momentum, turbulence, energy, and combustion...

  15. Knock Resistance and Fine Particle Emissions for Several Biomass-Derived Oxygenates in a Direct-Injection Spark-Ignition Engine

    Energy Technology Data Exchange (ETDEWEB)

    Ratcliff, Matthew A.; Burton, Jonathan; Sindler, Petr; Christensen, Earl; Fouts, Lisa; Chupka, Gina M.; McCormick, Robert L.

    2016-04-01

    Several high octane number oxygenates that could be derived from biomass were blended with gasoline and examined for performance properties and their impact on knock resistance and fine particle emissions in a single cylinder direct-injection spark-ignition engine. The oxygenates included ethanol, isobutanol, anisole, 4-methylanisole, 2-phenylethanol, 2,5-dimethyl furan, and 2,4-xylenol. These were blended into a summertime blendstock for oxygenate blending at levels ranging from 10 to 50 percent by volume. The base gasoline, its blends with p-xylene and p-cymene, and high-octane racing gasoline were tested as controls. Relevant gasoline properties including research octane number (RON), motor octane number, distillation curve, and vapor pressure were measured. Detailed hydrocarbon analysis was used to estimate heat of vaporization and particulate matter index (PMI). Experiments were conducted to measure knock-limited spark advance and particulate matter (PM) emissions. The results show a range of knock resistances that correlate well with RON. Molecules with relatively low boiling point and high vapor pressure had little effect on PM emissions. In contrast, the aromatic oxygenates caused significant increases in PM emissions (factors of 2 to 5) relative to the base gasoline. Thus, any effect of their oxygen atom on increasing local air-fuel ratio was outweighed by their low vapor pressure and high double-bond equivalent values. For most fuels and oxygenate blend components, PMI was a good predictor of PM emissions. However, the high boiling point, low vapor pressure oxygenates 2-phenylethanol and 2,4-xylenol produced lower PM emissions than predicted by PMI. This was likely because they did not fully evaporate and combust, and instead were swept into the lube oil.

  16. Cold Start Emissions of Spark-Ignition Engines at Low Ambient Temperatures as an Air Quality Risk

    Directory of Open Access Journals (Sweden)

    Bielaczyc Piotr

    2014-12-01

    Full Text Available SI engines are highly susceptible to excess emissions when started at low ambient temperatures. This phenomenon has multiple air quality and climate forcing implications. Direct injection petrol engines feature a markedly different fuelling strategy, and so their emissions behaviour is somewhat different from indirect injection petrol engines. The excess emissions of direct injection engines at low ambient temperatures should also differ. Additionally, the direct injection fuel delivery process leads to the formation of PM, and DISI engines should show greater PM emissions at low ambient temperatures. This study reports on laboratory experiments quantifying excess emissions of gaseous and solid pollutants over a legislative driving cycle following cold start at a low ambient temperature for both engine types. Over the legislative cycle for testing at -7°C (the UDC, emissions of HC, CO, NOx and CO2 were higher when tested at -7°C than at 24°C. Massive increases in emissions of HC and CO were observed, together with more modest increases in NOx and CO2 emissions. Results from the entire driving cycle showed excess emissions in both phases (though they were much larger for the UDC. The DISI vehicle showed lower increases in fuel consumption than the port injected vehicles, but greater increases in emission of HC and CO. DISI particle number emissions increased by around 50%; DISI particle mass by over 600%. The observed emissions deteriorations varied somewhat by engine type and from vehicle to vehicle. Excesses were greatest following start-up, but persisted, even after several hundred seconds’ driving. The temperature of the intake air appeared to have a limited but significant effect on emissions after the engine has been running for some time. All vehicles tested here comfortably met the relevant EU limits, providing further evidence that these limits are no longer challenging and need updating.

  17. COMBUSTION SIMULATION IN A SPARK IGNITION ENGINE CYLINDER: EFFECTS OF AIR-FUEL RATIO ON THE COMBUSTION DURATION

    Directory of Open Access Journals (Sweden)

    Nureddin Dinler

    2010-01-01

    Full Text Available Combustion is an important subject of internal combustion engine studies. To reduce the air pollution from internal combustion engines and to increase the engine performance, it is required to increase combustion efficiency. In this study, effects of air/fuel ratio were investigated numerically. An axisymmetrical internal combustion engine was modeled in order to simulate in-cylinder engine flow and combustion. Two dimensional transient continuity, momentum, turbulence, energy, and combustion equations were solved. The k-e turbulence model was employed. The fuel mass fraction transport equation was used for modeling of the combustion. For this purpose a computational fluid dynamics code was developed by using the finite volume method with FORTRAN programming code. The moving mesh was utilized to simulate the piston motion. The developed code simulates four strokes of engine continuously. In the case of laminar flow combustion, Arrhenius type combustion equations were employed. In the case of turbulent flow combustion, eddy break-up model was employed. Results were given for rich, stoichiometric, and lean mixtures in contour graphs. Contour graphs showed that lean mixture (l = 1.1 has longer combustion duration.

  18. Direct fuel injection in spark ignition engines; Injecao direta de combustivel em motores de ignicao por centelha

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Rodrigo Fernando Estella dos; Hildebrand Junior, Leonidas; Passarini, Luis Carlos; Santos, Antonio Moreira dos; Bezerra, Adriano Carlos Nogueira [Sao Paulo Univ., Sao Carlos, SP (Brazil). Dept. de Engenharia Mecanica]. E-mail: santosrf@sc.usp.br

    2000-07-01

    This paper presents the state-of-art of the fuel direct electronic injection, specifically the Otto cycle, the present technology for feasibility of the utilization, the characteristics of the engine using this system, by comparison with systems using the indirect fuel injection, the obtained results with laboratory experiments performed in direct and indirect fuel injection and conclusions as well.

  19. Signal Analysis of Automotive Engine Spark Ignition System using Case-Based Reasoning (CBR) and Case-based Maintenance (CBM)

    Science.gov (United States)

    Huang, H.; Vong, C. M.; Wong, P. K.

    2010-05-01

    With the development of modern technology, modern vehicles adopt electronic control system for injection and ignition. In traditional way, whenever there is any malfunctioning in an automotive engine, an automotive mechanic usually performs a diagnosis in the ignition system of the engine to check any exceptional symptoms. In this paper, we present a case-based reasoning (CBR) approach to help solve human diagnosis problem. Nevertheless, one drawback of CBR system is that the case library will be expanded gradually after repeatedly running the system, which may cause inaccuracy and longer time for the CBR retrieval. To tackle this problem, case-based maintenance (CBM) framework is employed so that the case library of the CBR system will be compressed by clustering to produce a set of representative cases. As a result, the performance (in retrieval accuracy and time) of the whole CBR system can be improved.

  20. Effect of Atmospheric Pressure and Temperature on a Small Spark Ignition Internal Combustion Engine’s Performance

    Science.gov (United States)

    2011-03-24

    engine through a gearing system. Cadou et al (8) asserts that utilizing this setup allows for a more accurate measurement of the torque because there...supercharger, a Delta VFD-F variable frequency drive part number VFD185F43A, an automatic belt tensioner, a mounting plate, and pulley . A guard for...the drive belt was constructed to prevent injury in the case of belt failure. The motor pulley to compressor pulley has a measured ratio of 3.362:1

  1. Experimental Investigation of Augmented Spark Ignition of a LO2/LCH4 Reaction Control Engine at Altitude Conditions

    Science.gov (United States)

    Kleinhenz, Julie; Sarmiento, Charles; Marshall, William

    2012-01-01

    The use of nontoxic propellants in future exploration vehicles would enable safer, more cost-effective mission scenarios. One promising green alternative to existing hypergols is liquid methane (LCH4) with liquid oxygen (LO2). A 100 lbf LO2/LCH4 engine was developed under the NASA Propulsion and Cryogenic Advanced Development project and tested at the NASA Glenn Research Center Altitude Combustion Stand in a low pressure environment. High ignition energy is a perceived drawback of this propellant combination; so this ignition margin test program examined ignition performance versus delivered spark energy. Sensitivity of ignition to spark timing and repetition rate was also explored. Three different exciter units were used with the engine s augmented (torch) igniter. Captured waveforms indicated spark behavior in hot fire conditions was inconsistent compared to the well-behaved dry sparks. This suggests that rising pressure and flow rate increase spark impedance and may at some point compromise an exciter s ability to complete each spark. The reduced spark energies of such quenched deliveries resulted in more erratic ignitions, decreasing ignition probability. The timing of the sparks relative to the pressure/flow conditions also impacted the probability of ignition. Sparks occurring early in the flow could trigger ignition with energies as low as 1 to 6 mJ, though multiple, similarly timed sparks of 55 to 75 mJ were required for reliable ignition. Delayed spark application and reduced spark repetition rate both correlated with late and occasional failed ignitions. An optimum time interval for spark application and ignition therefore coincides with propellant introduction to the igniter.

  2. A historical analysis of the co-evolution of gasoline octane number and spark-ignition engines

    Directory of Open Access Journals (Sweden)

    Derek eSplitter

    2016-01-01

    Full Text Available In this work, the authors reviewed engine, vehicle, and fuel data since 1925 to examine the historical and recent coupling of compression ratio and fuel antiknock properties (i.e., octane number in the U.S. light-duty vehicle market. The analysis identified historical time frames and trends and illustrated how three factors—consumer preferences, technical capabilities, and regulatory legislation—affect personal mobility. Data showed that over many decades these three factors have a complex and time-sensitive interplay. Long-term trends in the data were identified where interaction and evolution between all three factors were observed. Specifically, transportation efficiency per unit power (gal/ton-mi/hp was found to be a good metric to integrate technical, societal, and regulatory effects into the evolutional pathway of personal mobility. From this framework, discussions of future evolutionary changes to personal mobility are also presented, with a focus centered on how increasing fuel octane number can help to enable sustained improvement in transportation efficiency per unit power.

  3. The Effect of Spark Timing on the Spark Ignition

    Directory of Open Access Journals (Sweden)

    Rafeq A. Khalefa

    2013-04-01

    Full Text Available  In this work the effect of spark timing on the spark ignition engines is investigated by computer simulation and experimental test for speeds of (1500,2000,2500,3000 and 3500rpm at spark timing of (20o,30o,40o,50o and 60o before TDC for each speed. This is done in order to find a suitable  mathematical expression for spark ignition advancing with respect to the speed of the engine to predict the correct ignition advance  as in real engines .The results showed that the method of using a mathematical expression is more realistic and reasonable  comparing  with the results obtained by other workers. 

  4. 40 CFR 89.609 - Final admission of modification nonroad engines and test nonroad engines.

    Science.gov (United States)

    2010-07-01

    ... has not been placed on a currently effective EPA list of ICIs ineligible to import such modification... submittal of the ICI's application under paragraph (b) of this section. (e) EPA list of ICIs ineligible to import nonroad engines for modification/test. EPA maintains a current list of ICIs who have...

  5. Spark ignition engine control: estimation and prediction of the in-cylinder mass and chemical species; Controle moteur a allumage commande: estimation / prediction de la masse et de la composition du melange enferme dans le cylindre

    Energy Technology Data Exchange (ETDEWEB)

    Giansetti, P.

    2005-09-15

    Spark ignition engine control has become a major issue regarding compliance with emissions legislation while ensuring driving comfort. The objective of this thesis was to estimate the mass and composition of gases inside the cylinder of an engine based on physics in order to insure better control of transient phases taking into account residual gases as well as exhaust gas recirculation. Residual gas fraction has been characterized using two experiments and one CFD code. A model has been validated experimentally and integrated into an observer which predicts pressure and temperature inside the manifold. The predictions of the different gas flows and the chemical species inside the cylinder are deduced. A closed loop observer has been validated experimentally and in simulation. Moreover, an algorithm estimating the fresh and burned gas mass from the cylinder pressure has been proposed in order to obtain the information cycle by cycle and cylinder by cylinder. (author)

  6. 点燃式缸内直喷甲醇发动机甲醛和未燃甲醇排放特性%Formaldehyde and unburned methanol emissions from a spark-ignition direct-injection methanol engine

    Institute of Scientific and Technical Information of China (English)

    宫长明; 张自雷; 贾京龙; 崔峰云; 郑伟

    2012-01-01

    The effects of methanol injection timing, ignition timing and excess air ratio on formaldehyde and unburned methanol emissions from a spark-ignition direct-injection methanol engine under homogenous combustion mode were investigated experimentally by means of a measurement method in which the gas chromatography and the liquid chromatography were used to separate and measure formaldehyde and methanol. The results show that the methanol injection timing, ignition timing and excess air ratio affect significantly the formaldehyde and unburned methanol emissions from a spark- ignition directqnjection methanol engine. The variations in emitted formaldehyde and unburned methanol show opposite tendencies with the variations in the methanol injection timing, ignition timing and excess air ratio. Retarding methanol injection timing, advancing ignition timing and using lean mixture decrease formaldehyde emission.%基于气相色谱和液相色谱相结合的甲醛和甲醇测量方法,试验研究了点燃式缸内直喷甲醇发动机甲醇喷射正时、点火正时和过量空气系数在均质燃烧模式下对甲醛和未燃甲醇排放的影响。试验结果表明,甲醇喷射正时、点火正时和过量空气系数对该发动机甲醛和未燃甲醇排放有显著影响,并且甲醛和未燃甲醇排放随喷射正时、点火正时和过量空气系数的变化呈相反的变化趋势。推迟喷射甲醇、提前点火及采用稀混合气可以降低甲醛排放。

  7. Testing of the J-2X Augmented Spark Igniter (ASI) and Its Electronics

    Science.gov (United States)

    Osborne, Robin

    2015-01-01

    Reliable operation of the spark ignition system electronics in the J-2X Augmented Spark Igniter (ASI) is imperative in assuring ASI ignition and subsequent Main Combustion Chamber (MCC) ignition events are reliable in the J-2X Engine. Similar to the man-rated J-2 and RS-25 engines, the J-2X ignition system electronics are equipped with spark monitor outputs intended to indicate that the spark igniters are properly energized and sparking. To better understand anomalous spark monitor data collected on the J-2X development engines at NASA Stennis Space Center (SSC), a comprehensive subsystem study of the engine's low- and high-tension spark ignition system electronics was conducted at NASA Marshall Space Flight Center (MSFC). Spark monitor output data were compared to more detailed spark diagnostics to determine if the spark monitor was an accurate indication of actual sparking events. In addition, ignition system electronics data were closely scrutinized for any indication of an electrical discharge in some location other than the firing tip of the spark igniter - a problem not uncommon in the development of high voltage ignition systems.

  8. 40 CFR 1048.301 - When must I test my production-line engines?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false When must I test my production-line...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.301 When must I test my production-line engines? (a) If you produce...

  9. 40 CFR 1054.301 - When must I test my production-line engines?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false When must I test my production-line...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Production-line Testing § 1054.301 When must I test my production-line engines? (a) If you...

  10. Modelling of a Spark Ignition Engine for Power-Heat Production Optimization Modèle de moteur à allumage commandé en vue de l’optimisation de la production chaleur-force

    Directory of Open Access Journals (Sweden)

    Descieux D.

    2011-09-01

    Full Text Available Spark ignition gas engine is more and more used in order to produce electricity and heat simultaneously. The engine crankshaft drives a synchronous electric generator. The thermal power output is recovered from the engine coolant system and exhaust gas, and is used to produce generally hot water for heating system. In order to have a better adequacy between supply (production of the engine and user demand, good knowledge of the engine and implemented phenomena are necessary. A generic methodology is proposed to simulate the stationary state response of a SI engine. The engine simulation is based on a one zone thermodynamic model, which characterizes each phase of the engine cycle to predict energy performances: exergy efficiency as high as 0.70 is attainable. Le moteur a allumage commande alimente en gaz est un moteur de plus en plus utilise pour la production simultanee d’electricite et de chaleur. Classiquement le moteur entraine sur l’arbre une generatrice electrique. Le flux thermique est recupere principalement sur le systeme de refroidissement du moteur ainsi que sur les fumees chaudes et il est generalement utilise pour produire de la chaleur pour les systemes de chauffage. Pour avoir une meilleure adaptation entre la production du moteur et la demande de l’usager, une bonne connaissance des evolutions dans le moteur et des phenomenes correspondants est necessaire. Une methode thermodynamique generale est proposee pour simulation du fonctionnement dynamique stationnaire d’un MACI. Le modele utilise une analyse monozone et les caracteristiques de chaque transformation du cycle pour etudier les performances energetiques : rendement exergetique de l’ordre de 0,70.

  11. Nanoparticle Filtration Characteristics of Advanced Metal Foam Media for a Spark Ignition Direct Injection Engine in Steady Engine Operating Conditions and Vehicle Test Modes

    Directory of Open Access Journals (Sweden)

    Cha-Lee Myung

    2015-03-01

    Full Text Available In this study, the particle formation and reduction characteristics at the engine-out position, after a three-way catalyst (TWC and a metal foam gasoline particulate filter (GPF, were evaluated for a gasoline direct-injection (GDI engine under part-load operating conditions. The vehicle tests were performed under the Federal Test Procedure-75 (FTP-75 and the Highway Fuel Economy Test (HWFET modes. Particle number (PN concentrations, size distributions, and the filtering efficiency with the GPF were evaluated with a condensation particle counter (CPC and a differential mobility spectrometer (DMS500. Under steady engine operating conditions, the PN concentrations at the engine-out position were 9.7 × 105–2.5 × 106 N/cc. While, the PN concentrations after the GPF were 9.2 × 104–3.5 × 105 N/cc, and the PN was reduced by 77%–96%. The PN filtering efficiency with the GPF-GDI vehicle reached approximately 58% in the FTP-75 and 62% in the HWFET mode. The PN concentration of the GPF-GDI vehicle was significantly reduced to 3.95 × 1011 N/km for the FTP-75 and 8.86 × 1010 N/km for the HWFET mode. The amount of nucleation mode particles below 23 nm was substantially reduced with the GPF-GDI vehicle. The fuel economy, CO2, and regulated emissions of the GPF-GDI vehicle were equivalent to those of the base GDI vehicle under the vehicle certification modes.

  12. Computer aided engineering in exhaust aftertreatment systems design. Pt. 1. Spark ignition engine; Computergestuetzter Entwurf von Abgas-Nachbehandlungskonzepten. T. 1. Ottomotor

    Energy Technology Data Exchange (ETDEWEB)

    Stamatelos, A.M.; Koltsakis, G.C.; Kandylas, I.P. [Aristotelian Univ. of Thessaloniki (Greece)

    1999-02-01

    At the Aristotle University Thessaloniki, Greece, an integrated Computer Aided Engineering (CAE) methodology assisting the design of SI-engine exhaust aftertreatment systems employing the following computational tools was developed: A computer code which models transient exhaust system heat transfer, a tuneable computer code which models the transient operation of a three-way catalytic converter, a database containing chemical kinetics data for a variety of catalyst formulations, and a methodology for ageing assessment calculations. Application of the CAE methodology, which aids the exhaust aftertreatment system design engineer to meet the upcoming, increasingly stringent emission standards, is high-lighted by referring to a number of representative case studies. (orig.) [Deutsch] An der Aristoteles-Universitaet Thessaloniki, Griechenland, wurde eine computergestuetzte Methode (CAE) entwickelt, die den Entwurf und die Konstruktion von Abgasnachbehandlungskonzepten unterstuetzt. Die Methode setzt auf die folgenden Rechenmodelle und Datenbanken: Ein Rechenmodell zur Berechnung des Waermeuebergangs in Motorabgassystemen, ein Rechenmodell zur Abschaetzung des Katalysatorgegendrucks, eine Datenbank mit den chemischen Kinetikdaten fuer die verschiedenen Typen von Dreiwegekatalysatoren und eine computergestuetzte Prozedur zur Abschaetzung des Alterungsverhaltens von Dreiwegekatalysatoren. Integrierte CAE-Methoden koennen beim Entwurf von modernen Abgasnachbehandlungssystemen angewandt werden, um die Entwicklungszeit und -kosten betraechtlich zu reduzieren. (orig.)

  13. The new small spark ignited engine family. Ranging from the naturally aspirated three-cylinder to the boosted four-cylinder; Die neue kleine Ottomotorenfamilie von General Motors. Vom freisaugenden Dreizylinder bis zum aufgeladenen Vierzylinder

    Energy Technology Data Exchange (ETDEWEB)

    Boehler, G.; Buhr, R.; Reinheimer, G. [Adam Opel GmbH, Ruesselsheim (Germany)

    2010-07-01

    The new small spark ignited engine family of GM (internal nomination family 0) with displacements from 1.0 to 1.4ltrs. covers 25% of the Opel vehicle volume. To comply with numerous requirements in respect of fuel economy, exhaust emission reductions, demanded efficient downsizing, and alternative propulsion concepts, Opel has made a fundamental revision of its Fam 0 engine family and added new engine variants to its portfolio. Above this a good compromise between technology available, and justifiable cost of manufacture had to be made without infringing the overriding objectives in this cost sensitive vehicle segment. The third generation of this engine family is consequent refinement of the second generation three- and four-cylinder engines already proven millions of times. The program is upgraded by a newly developed 1.4 ltr. turbo engine, a modular derivative of the naturally aspirated engines, which was realized in the form of a downsizing/ downspeeding concept, resulting in fuel economy improvements of up to 12 %. In the new Astra the exhaust emissions of the turbo engine are as low as 139 g CO{sub 2}/km. The four-cylinder engines feature continuously variable cam phasers on both intake and exhaust side, a volume flow-controlled oil pump, and an electrically controlled thermostat. For the naturally aspirated engines the port de-activation system introduced with the second generation was further developed and matched with the requirements of internal exhaust gas return. Increased acoustic requirements were accommodated by targeted structural measures, the use of torsional vibration dampers for all engines, and further optimization of charge cycles and combustion. A modified 1.4 ltr. naturally aspirated engine will be employed late this year in the trend-setting alternative propulsion concept of the extended range Chevrolet Volt vehicle, and at a later date in the Opel Ampera. The engines are manufactured in Aspern on the outskirts of Vienna. In late 2010 an

  14. Prediction Studies for the Performance of a Single Cylinder High Speed Spark Ignition Linier Engine with Spring Mechanism as Return Cycle

    Directory of Open Access Journals (Sweden)

    A. Z.M. Fathallah

    2009-01-01

    Full Text Available Problem statement: Most concepts of linear engines were constructed as opposed pistons with complicated control devise to drive the engines. The advantage of the engines was their high overall efficiency. Approach: Although the efficiency was higher than conventional engine, however, it did not be applied yet, because the design of these engines was not only difficult to fabricate, but also it has little chance to compete the traditional engines in the market. Spring is adopted as a return force of the piston movement technique. Results: The unique of using spring as return cycle is the main characteristic of these engines. However, stroke of the engine is not constant as in the traditional engine. The problem is that, the expansion stroke is depending on thrust force of piston. On the other hand, the engine needs to operate in variable speed and load. This study is a prediction of the performance of both rotational and linear engines. Conclusion/Recommendations: The result of the examination can be used as return cycle design data of a single cylinder linear engine with spring device. As a result, the spring mechanism can be adopted to be used as return cycle in linear engine.

  15. Effect of cooled EGR on performance and exhaust gas emissions in EFI spark ignition engine fueled by gasoline and wet methanol blends

    Science.gov (United States)

    Rohadi, Heru; Syaiful, Bae, Myung-Whan

    2016-06-01

    Fuel needs, especially the transport sector is still dominated by fossil fuels which are non-renewable. However, oil reserves are very limited. Furthermore, the hazardous components produced by internal combustion engine forces many researchers to consider with alternative fuel which is environmental friendly and renewable sources. Therefore, this study intends to investigate the impact of cooled EGR on the performance and exhaust gas emissions in the gasoline engine fueled by gasoline and wet methanol blends. The percentage of wet methanol blended with gasoline is in the range of 5 to 15% in a volume base. The experiment was performed at the variation of engine speeds from 2500 to 4000 rpm with 500 intervals. The re-circulated exhaust gasses into combustion chamber was 5%. The experiment was performed at the constant engine speed. The results show that the use of cooled EGR with wet methanol of 10% increases the brake torque up to 21.3%. The brake thermal efficiency increases approximately 39.6% using cooled EGR in the case of the engine fueled by 15% wet methanol. Brake specific fuel consumption for the engine using EGR fueled by 10% wet methanol decreases up to 23% at the engine speed of 2500 rpm. The reduction of CO, O2 and HC emissions was found, while CO2 increases.

  16. The Effect of Spring Design as Return Cycle of Two Stroke Spark Ignition Linear Engine on the Combustion Process and Performance

    Directory of Open Access Journals (Sweden)

    A. Z.M. Fathallah

    2010-01-01

    Full Text Available Problem statements: The effects of optimization on spring design of the linear engine with spring mechanism in its performance and combustion process have been examined. However, at certain conditions the engine can not work properly as predicted. This can happen because displacement of engine stroke is depending on thrust forces of combustion process in cylinder of the engine. For that, some speed range can not open the scavenging ports, some speed can not open properly and most speeds range work normal. Moreover, pressure ratio also decrease depend on deflection of spring characteristics. Approach: This research examined the performance of engine at certain conditions in which displacement of spring did not work normal, such at 1, 4.1 and 4.6 m sec-1 speed. It was necessary to examine because at that speeds intake scavenging port did not open properly. Therefore, simulation technique had been adopted to solve of the problems. Results: The combustion pressure and power output were compared with prediction result. Conclusion: The results were significant drop of Indicated Mean Effective Pressure (IMEP and impacted reduced in power output. At three parts only 1 m sec-1 speed of linear engine could work normal.

  17. DESIGN OF A HIGH COMPRESSION, DIRECT INJECTION, SPARK-IGNITION, METHANOL FUELED RESEARCH ENGINE WITH AN INTEGRAL INJECTOR-IGNITION SOURCE INSERT, SAE PAPER 2001-01-3651

    Science.gov (United States)

    A stratified charge research engine and test stand were designed and built for this work. The primary goal of this project was to evaluate the feasibility of using a removal integral injector ignition source insert which allows a convenient method of charging the relative locat...

  18. Fonctionnement transitoire et controle de la richesse des moteurs à allumage commandé à injection multipoint Transient Operation and Air-Fuel Ratio Control of Spark-Ignition Port-Injected Engines

    Directory of Open Access Journals (Sweden)

    Le Moyne L.

    2006-12-01

    Full Text Available Sur les moteurs à allumage commandé à injection multipoint on observe des désadaptations de richesse lors de fonctionnement transitoire. Ces désadaptations sont dues au dépôt, sous forme de film liquide, du carburant injecté dans le collecteur. Elles peuvent être compensées par une gestion adéquate de la masse injectée. Ainsi, afin d'obtenir la masse de carburant qui maintient la richesse constante, nous avons développé un modèle bidimensionnel des écoulements dans le collecteur au cours du cycle moteur. Ce modèle décrit l'écoulement des gaz frais, des gouttes injectées, des gaz brûlés refoulés vers l'admission et du film sur les parois, sur le principe de la séparation des phases. Nous montrons que le modèle reproduit correctement le signal de richesse et comment il permet de supprimer les désadaptations. La mesure de richesse est faite à l'échappement avec une sonde à oxygène dont nous validons le fonctionnement en transitoire avec une corrélation à la pression maximale du cycle dans le cylindre. Air-fuel ratio excursions are observed on port-injected spark ignition engines during transients. This excursions result from the liquid fuel film deposited on intake port. They can be compensated by controlling the injected fuel mass. In order to have the amount of fuel that keeps air-fuel ratio constant, we have developed a 2D model of flows in the intake port during engine cycle. This separate phases model describes the flow of fresh gases, injected droplets, hot burned gases and film on port walls. We show that the model effectively predicts the equivalence ratio and how it allows to eliminate excursions. Equivalence ratio measures are made with an oxygen sensor which functioning is validated during transients by correlating it to maximal pressure during engine cycle.

  19. Performance of a diesel engine transformed to spark ignition using natural gas; Desempenho de um motor diesel convertido para utilizacao de gas natural como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, Ricardo H.R. [Coordenacao dos Programas de Pos-Graduacao de Engenharia (LEDAV/COPPE/UFRJ), RJ (Brazil). Lab. de Ensaios Dinamicos e Analise de Vibracao; Belchior, Carlos R.P. [Coordenacao dos Programas de Pos-Graduacao de Engenharia (LMT/COPPE/UFRJ), RJ (Brazil). Lab. de Maquinas Termicas; Sodre, Jose Ricardo [Pontificia Universidade Catolica de Minas Gerais (PUC/Minas), MG (Brazil)

    2012-07-01

    A zero-dimensional thermodynamic model for a diesel engine converted for dedicated use of natural gas was developed in this work. The computational model covers from the time of closing the inlet valve to the time of opening the exhaust valve and it was divided into three stages (compression, combustion and expansion). A model based on the first law of thermodynamics for closed cycle has been developed to study the performance of the engine. The combustion process was modeled using the equation of Wiebe. It was taken into consideration the convective heat transfer through the walls of the cylinder and the heat transfer coefficient was calculated by the Eichelberg correlation. It was also considered that the thermodynamic properties vary with temperature. To represent the gas mixture behavior inside the cylinder two approaches (Ideal Gas Equation and Van Der Waals's Real Gas Equation) were used and results compared. The computational model was validated with experimental tests. (author)

  20. Influence of Injector Location on Part-Load Performance Characteristics of Natural Gas Direct-Injection in a Spark Ignition Engine

    Energy Technology Data Exchange (ETDEWEB)

    Sevik, James [Argonne National Lab. (ANL), Argonne, IL (United States); Pamminger, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Wallner, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); Scarcelli, Riccardo [Argonne National Lab. (ANL), Argonne, IL (United States); Boyer, Brad [Ford Motor Co., Detroit, MI (United States); Wooldridge, Steven [Ford Motor Co., Detroit, MI (United States); Hall, Carrie [Illinois Inst. of Technology, Chicago, IL (United States); Miers, Scott [Michigan Technological Univ., Houghton, MI (United States)

    2016-04-05

    Interest in natural gas as an alternative fuel source to petroleum fuels for light-duty vehicle applications has increased due to its domestic availability and stable price compared to gasoline. With its higher hydrogen-to-carbon ratio, natural gas has the potential to reduce engine out carbon dioxide emissions, which has shown to be a strong greenhouse gas contributor. For part-load conditions, the lower flame speeds of natural gas can lead to an increased duration in the inflammation process with traditional port-injection. Direct-injection of natural gas can increase in-cylinder turbulence and has the potential to reduce problems typically associated with port-injection of natural gas, such as lower flame speeds and poor dilution tolerance. A study was designed and executed to investigate the effects of direct-injection of natural gas at part-load conditions. Steady-state tests were performed on a single-cylinder research engine representative of current gasoline direct-injection engines. Tests were performed with direct-injection in the central and side location. The start of injection was varied under stoichiometric conditions in order to study the effects on the mixture formation process. In addition, exhaust gas recirculation was introduced at select conditions in order to investigate the dilution tolerance. Relevant combustion metrics were then analyzed for each scenario. Experimental results suggest that regardless of the injector location, varying the start of injection has a strong impact on the mixture formation process. Delaying the start of injection from 300 to 120°CA BTDC can reduce the early flame development process by nearly 15°CA. While injecting into the cylinder after the intake valves have closed has shown to produce the fastest combustion process, this does not necessarily lead to the highest efficiency, due to increases in pumping and wall heat losses. When comparing the two injection configurations, the side location shows the best

  1. Study of carbonaceous nanoparticles in premixed C{sub 2}H{sub 4}-air flames and behind a spark ignition engine

    Energy Technology Data Exchange (ETDEWEB)

    Grotheer, Horst-Henning; Hoffmann, Kai; Wolf, Katrin; Kanjarkar, Santosh; Wahl, Claus; Aigner, Manfred [Institute of Combustion Technology, DLR, Pfaffenwaldring 38, 70569 Stuttgart (Germany)

    2009-04-15

    Nanoparticle size distributions and their concentrations were studied in atmospheric premixed ethylene/air flames using photo ionization mass spectrometry (PIMS) and total organic carbon (TOC) calibration supplemented by differential mobility analysis (DMA). Focus of this study is the evolution of nanoparticles as a function of height above burner (HAB) and of the C/O ratio of the unburned gases. It was found that especially particles of the cluster type exhibit a sharp concentration drop by more than two orders of magnitude within a narrow C/O window which is close to the sooting threshold. Using DMA a decline by two orders of magnitude was found. These results suggest that at best only small concentrations of nanoparticles should be formed significantly below the sooting threshold. As these conditions prevail in a homogeneously charged IC engine no or only very small nanoparticle emissions are expected in the exhaust gas. This was indeed found for a small Otto engine driving a power generator unit. Using flame nanoparticle profiles as standard, absolute concentrations for their emissions could be deduced. These data were supported by additional DMA measurements. The calibration using TOC did not completely match the one based on the condensation particle counter of the DMA apparatus. (author)

  2. THE EFFECT OF ADDING HYDROGEN ON THE PERFORMANCE AND THE CYCLIC VARIABILITY OF A SPARK IGNITION ENGINE POWERED BY NATURAL GAS

    Directory of Open Access Journals (Sweden)

    Andrej Chríbik

    2014-02-01

    Full Text Available This paper deals with the influence of blending hydrogen (from 0 to 50% vol. on the parameters and the cyclic variability of a Lombardini LGW702 combustion engine powered by natural gas. The experimental measurements were carried out at various air excess ratios and at various angles of spark advance, at an operating speed of 1500 min−1. An analysis of the combustion pressure showed that as the proportion of hydrogen in the mixture increases, the maximum pressure value also increases. However, at the same time the cyclic variability decreases. Both the ignition-delay period and the period of combustion of the mixture become shorter, which requires optimization of the spark advance angle for various proportions of hydrogen in the fuel. The increasing proportion of hydrogen extends the flammability limit to the area of lean-burn mixtures and, at the same time, the coefficient of cyclic variability of the mean indicated pressure decreases.

  3. Sensorless control of electromagnetic actuators for gas valves in spark ignition engines; Sensorlose Regelung elektromagnetischer Aktuatoren fuer die Betaetigung von Gaswechselventilen im Otto-Motor

    Energy Technology Data Exchange (ETDEWEB)

    Butzmann, S.

    2000-07-01

    A method for sensorless control of the impact speed of the armature of electromagnetic actuators is presented and described in great detail. The control algorithm was implemented in a compact electronic control unit for a 4-cylinder, 16-valve engine and was tested both in the laboratory and in a real engine. The method was first presented in September 1999 at the Frankfurt IHH, where it met with great interest. [German] In dieser Arbeit wurde ein Verfahren zur sensorlosen Regelung der Aufsetzgeschwindigkeit des Ankers bei elektromagnetischen Aktuatoren vorgestellt. Um den Anker zwischen den beiden Seiten des Luftspalts zu bewegen, werden zwei Elektromagnete abwechselnd bestromt, die Bewegung wird dabei von zwei Federn unterstuetzt. Fliesst waehrend eines solchen Umschwingvorgangs ein konstanter Strom durch die Spulen, so nimmt waehrend der Annaeherung an die Polflaeche die Magnetkraft mit der Luftspaltlaenge 1/l{sub L}{sup 2} zu, waehrend die entgegengesetzt wirkende Federkraft nur linear mit der Luftspaltlaenge l{sub L} steigt. Dies fuehrt prinzipiell zu einer unerwuenschten Beschleunigung des Ankers am Ende der Bewegung und damit zu einem harten Aufprall, der Laerm erzeugt und die Aktuatorlebensdauer reduziert. Ausgehend vom idealen Verfahren der zeitoptimalen Regelung, welches allerdings hohe Anforderungen an Sensorik und Rechenleistung stellt, wurde ein Algorithmus hergeleitet, welcher die zur Regelung der Aufsetzgeschwindigkeit erforderlichen Signale aus dem Stromverlauf in den Aktuatorspulen ableitet. Das neue Regelverfahren umgeht daher die Probleme, die durch den Einsatz von Sensoren entstehen. Waehrend der Ankerbewegung werden die Spulen zusaetzlich stimuliert, um eine hoehere Observationsgenauigkeit zu erzielen. Durch Adaption zwischen zwei aufeinanderfolgenden Ventilbetaetigungen und Regelung der Bewegung waehrend der Flugphase kann die Aufsetzgeschwindigkeit des Ankers praezise geregelt werden. Gleichzeitig konnte die zur Regelung erforderliche

  4. Mechanisms for the formation of exhaust hydrocarbons in a single cylinder spark-ignition engine, fueled with deuterium-labeled ortho-, meta-, and para-xylene

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, D.; Jackson, R.A. [Univ. of Sussex, Brighton (United Kingdom). School of Chemistry, Physics and Environmental Science; Bennett, P.J. [BP Oil, Sunbury-on-Thames (United Kingdom)

    1999-08-01

    Combustion studies in engines have investigated the chemistry leading to the formation in the exhaust of aromatic hydrocarbons from deuterium-labeled isomeric xylenes. These fuels were: ortho-xylene-d{sub 0} and ortho-xylene=d{sub 10} (1:1); para-xylene-d{sub 0} and para-xylene-d{sub 10} (1:1); and meta-xylene-2,4,5,6-d{sub 4}. Isotopic distributions within the exhausted hydrocarbons establish the postflame chemistry involved. There is an isotope effect in the consumption of residual fuel in the postflame region. The residual fuel from each experiment exhibits minimal H-D exchange. Toluene is an intermediate in the formation of ethylbenzene, and is produced through X{sup {sm_bullet}} atom (X{sup {sm_bullet}} = H or D) displacement of methyl radicals from the xylene fuel. Benzene is formed by direct demethylation, but there are other routes. Styrene from o- and p-xylene fuels is formed intramolecularly, probably involving xylylene and methylcycloheptatetraene intermediates. Ethyltoluene is formed by combination of methyl and methylbenzyl radicals.

  5. The Effect of Water Injection on the Control of In-Cylinder Pressure and Enhanced Power Output in a Four-Stroke Spark-Ignition Engine

    Directory of Open Access Journals (Sweden)

    Mingrui Wei

    2016-09-01

    Full Text Available This paper presents the results for liquid water injection (WI into a cylinder during the compression and expansion strokes of an internal combustion engine (ICE, with the aim of achieving an optimal in-cylinder pressure and improving power output using CFD simulation. Employing WI during the compression stroke at 80° of crank angle (CA before top dead centre (bTDC resulted in the reduction of compression work due to a reduction in peak compression pressure by a margin of about 2%. The decreased peak compression pressure also yielded the benefit of a decrease in NOx emission by a margin of 34% as well as the prevention of detonation. Using WI during the expansion stroke (after top dead centre–aTDC revealed two stages of the in-cylinder pressure: the first stage involved a decrease in pressure by heat absorption, and the second stage involved an increase in the pressure as a result of an increase in the steam volume via expansion. For the case of water addition (WA 3.0% and a water temperature of 100 °C, the percentage decrease of in-cylinder pressure was 2.7% during the first stage and a 2.5% pressure increase during the second stage. Water injection helped in reducing the energy losses resulting from the transfer of heat to the walls and exhaust gases. At 180° CA aTDC, the exhaust gas temperature decreased by 42 K, 89 K, and 136 K for WA 1.0, WA 2.0, and WA 3.0, respectively. Increasing the WI temperature to 200 °C resulted in a decrease of the in-cylinder pressure by 1.0% during the first stage, with an increase of approximately 4.0% in the second stage. The use of WI in both compression and expansion strokes resulted in a maximum increase of in-cylinder pressure of about 7%, demonstrating the potential of higher power output.

  6. Evaluation of Butanol–Gasoline Blends in a Port Fuel-injection, Spark-Ignition Engine Évaluation de mélange butanol-essence dans un moteur à allumage commandé à injection indirecte

    Directory of Open Access Journals (Sweden)

    Dernotte J.

    2009-11-01

    Full Text Available This paper assesses different butanol–gasoline blends used in a port fuel-injection, spark-ignition engine to quantify the influence of butanol addition on the emission of unburned hydrocarbons, carbon monoxide, and nitrogen oxide. Furthermore, in-cylinder pressure was measured to quantify combustion stability and to compare the ignition delay and fully developed turbulent combustion phases as given by 0%–10% and 10%–90% Mass Fraction Burned (MFB. The main findings are: 1 a 40% butanol/60% gasoline blend by volume (B40 minimizes HC emissions; 2 no significant change in NOx emissions were observed, with the exception of the 80% butanol/20% gasoline blend; 3 the addition of butanol improves combustion stability as measured by the COV of IMEP; 4 butanol added to gasoline reduces ignition delay (0%–10% MFB; and 5 the specific fuel consumption of B40 blend is within 10% of that of pure gasoline for stoichiometric mixture. Cet article évalue le potentiel de l’utilisation de différents mélanges butanolessence dans un moteur à allumage commandé à injection indirecte afin de quantifier l’influence de l’ajout de butanol sur les émissions des hydrocarbures imbrûlés (HC, le monoxyde de carbone (CO et les oxydes d’azote (NOx. De plus, l’influence sur la stabilité de combustion, le délai d’inflammation et sur la durée de la phase de combustion turbulente développée y sont également présentés. Les principaux résultats: 1 un mélange de 40% butanol et 60% essence (B40 par volume diminue les émissions de HC; 2 aucun effet significatif sur les émissions de NOx n’a été observé à l’exception du mélange 80% butanol/20% essence; 3 l’ajout de butanol améliore la stabilité de combustion ; 4 l’ajout de butanol réduit le délai d’inflammation, quantifié par la durée pour consommer 10% de masse de gaz frais; et 5 la consommation spécifique de carburant pour un mélange stoechiométrique de B40 est 10% sup

  7. Spark ignition of aviation fuel in isotropic turbulence

    Science.gov (United States)

    Krisman, Alex; Lu, Tianfeng; Borghesi, Giulio; Chen, Jacqueline

    2016-11-01

    Turbulent spark ignition occurs in combustion engines where the spark must establish a viable flame kernel that leads to stable combustion. A competition exists between kernel growth, due to flame propagation, and kernel attenuation, due to flame stretch and turbulence. This competition can be measured by the Karlovitz number, Ka, and kernel viability decreases rapidly for Ka >> 1 . In this study, the evolution of an initially spherical flame kernel in a turbulent field is investigated at two cases: Ka- (Ka = 25) and Ka+ (Ka = 125) using direct numerical simulation (DNS). A detailed chemical mechanism for jet fuel (Jet-A) is used, which is relevant for many practical conditions, and the mechanism includes a pyrolysis sub-model which is important for the ignition of large hydrocarbon fuels. An auxiliary non-reacting DNS generates the initial field of isotropic turbulence with a turbulent Reynolds number of 500 (Ka-) and 1,500 (Ka+). The kernel is then imposed at the center of the domain and the reacting DNS is performed. The Ka- case survives and the Ka+ case is extinguished. An analysis of the turbulence chemistry interactions is performed and the process of extinction is described. Department of Energy - Office of Basic Energy Science under Award No. DE-SC0001198.

  8. Contribution to the study of an lpg jet in the combustion chamber of a spark-ignition engine; Contribution a l'etude d'un jet de gpl dans la chambre de combustion d'un moteur a allumage commande, pour differentes strategies d'injection

    Energy Technology Data Exchange (ETDEWEB)

    Duong Viet, D.

    2002-07-01

    It appears tempting to combine the less polluting combustion of LPG with the energy performances of a direct injection spark-ignition engine. To this aim the study of high pressure injection of a liquid LPG jet, directly inside the combustion chamber of an engine was performed in two ways: Experimental studies: one with fast cinematography and another with the method of Doppler phases in an one-cylinder 'transparent' engine for various conditions of injection and without combustion. They respectively deliver empirical laws for the jet development and some informations about size and speed of the droplets of LPG. A modeling of the jet could then be made on the basis of a turbulent and deviated jet the parameters of which could be adjusted using results of the preceding experimental study. (author)

  9. Mesure et modélisation multidimensionnelle des transferts thermiques gaz-paroi dans le cas des moteurs à allumage commandé Measurement and Multidimensional Modeling of Gas-Wall Heat Transfers in Spark-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Gilaber P.

    2006-11-01

    formulation k-epsilon de la turbulence a été adoptée. La sensibilité du modèle aux effets de densité et de turbulence a été testée par l'intermédiaire de variations de l'avance à l'allumage et du régime. La comparaison entre mesure et simulation a montré un bon accord, tant en termes de flux thermiques locaux et instantanés, qu'en termes de bilan global. The computational fluid dynamics codes, which help to predict the behaviour of combusting gas in reciprocating engines, need, as boundary conditions for the momentum and energy equations, to approximate wall frictions and heat transfer between gas and walls. The purpose of this work is to validate a heat transfer model for spark ignited engines. Two steps of research have been worked on to meet this objective: an experimental phase and a computational phase. In the experimental phase, measurements were made on a test-engine instrumented with fast-response surface heat flux gages. Each gage consisted of a steel cylinder, containing two thermocouples. To analyze the influence of fluid dynamics on heat transfer, a Laser Doppler Velocimeter was used, by means of a spacer placed between the engine head and cylinder. The spacer was equiped with two windows and two heat-flux gages permitting simultaneous measurements of the heat flux and of the fluid dynamics outside the boundary layer. Two other gages were present in the head of the engine and up to ten data inputs could be simultaneously recorded at each crank-angle, including two velocity components and the cylinder pressure. A parametric analysis was carried out revealing the following trends:- the global heat transfer rate for a thermodynamic cycle of the engine decreases as the speed of the engine is increased, but the peak value of the wall heat-flux increases because of the increase of the turbulence level. - the volumetric efficiency appeared to have little effect on the turbulence level, and its influence on the heat transfer is mainly due to the increase of

  10. Exergetic Evaluation of Speed and Load Effects in Spark Ignition Engines Évaluation exergétique des effets de la vitesse et de la charge dans les moteurs àallumage par étincelle

    Directory of Open Access Journals (Sweden)

    Sezer I.

    2012-08-01

    Full Text Available This study investigates the effects of various operating conditions in spark ignition engines via an exergy analysis. A thermodynamic cycle model including compression, combustion and expansion processes was used for investigation. Induction and exhaust processes were computed with a simple approximation method. The principles of the second law were applied to the cycle model to perform the exergy analysis. Exergetic variables, i.e., the exergy transfers with heat and work, irreversibilities, thermomechanical exergy, fuel chemical exergy and total exergy were calculated in the exergy analysis. Variation of the exergetic parameters and the distribution of them into the fuel exergy were determined for various operating conditions, i.e., engine speed and load. The first and second law efficiencies and specific fuel consumption were also computed to reveal the optimum operating conditions. The results show that the exergy transfer with heat decreases and the exergy transfer with exhaust gases increases with increasing engine speed. Engine speed of 3 000 rpm gives the maximum exergy transfer as work, the minimum irreversibility and the best efficiency and fuel consumption. Exergy transfers with heat, work and exhaust and irreversibilities increase with increasing engine load. Additionally, the first and second law efficiencies increase and fuel consumption decreases with increasing engine load, so a high engine load gives the best efficiency and fuel consumption. Cette étude examine les effets des différentes conditions de fonctionnement de moteurs à allumage commandé via une analyse exergétique. Un modèle de cycle thermodynamique comprenant les processus de compression, combustion et détente a été utilisé. Les processus d’admission et d’échappement sont modélisés à l’aide d’une méthode simple d’approximation. Les principes de la deuxième loi de la thermodynamique ont été appliqués au modèle de cycle pour effectuer l

  11. Review: Fuel Volatility Standards and Spark-Ignition Vehicle Driveability

    Energy Technology Data Exchange (ETDEWEB)

    Yanowitz, Janet; McCormick, Robert L.

    2016-03-14

    We've put spark-ignition engine fuel standards in place in order to ensure acceptable hot and cold weather driveability (HWD and CWD). Vehicle manufacturers and fuel suppliers have developed systems that meet our driveability requirements so effectively that drivers overwhelmingly find that their vehicles reliably start up and operate smoothly and consistently throughout the year. For HWD, fuels that are too volatile perform more poorly than those that are less volatile. Vapor lock is the apparent cause of poor HWD, but there is conflicting evidence in the literature as to where in the fuel system it occurs. Most studies have found a correlation between degraded driveability and higher dry vapor pressure equivalent or lower TV/L = 20, and less consistently with a minimum T50. For CWD, fuels with inadequate volatility can cause difficulty in starting and rough operation during engine warmup. The Driveability Index (DI)-a function of T10, T50, and T90-is well correlated with CWD in hydrocarbon fuels. For ethanol-containing fuels, a correction factor to the DI equation improves the correlation with CWD, although the best value for that factor has still not been determined. Ethanol increases the heat of vaporization. But, this is likely insignificant for E15 and lower concentration fuels. The impact of ethanol on driveability is likely due to its direct effect on vapor pressure at cold temperatures. For E51-E83 or flex-fuel blends, ASTM sets a minimum vapor pressure; however, published data suggest that a correction for the amount of ethanol in the fuel is needed to accurately predict CWD, possibly because ethanol has a higher lower-flammability limit.

  12. Nonlinear dynamics analysis for combustion stability of spark-ignition engine%点燃式发动机燃烧稳定性的非线性动力学分析

    Institute of Scientific and Technical Information of China (English)

    刘帅; 王忠; 赵洋; 瞿磊; 孙波

    2016-01-01

    In order to reveal the dynamic essence of combustion cyclic fluctuations, gasoline, liquefied petroleum gas (LPG) and compressed natural gas (CNG) were burned in the ignition engine, and the cyclical fluctuations of combustion pressure were investigated using nonlinear dynamics method. The pressure data in 200 cycles were collected to discuss the regulation of in-cylinder pressure which varied with the time and to analyze cyclical fluctuation factors of the maximum break pressure. In addition, time sequences of pressure in cylinder were rebuilt three-dimensionally combined with differential coordinates, and the principles and distribution features of phase space structure changing during combustion period were studied. Phase space tracks were simplified and rebuilt by the Poincare section method to probe into the Poincare mapping points distribution of in-cylinder pressure in cross sections on whose the second derivative was zero (The second derivative of pressure was zero, Z=0) and the pressure rise rate was zero (The first derivative of pressure was zero, Y=0). The cyclical fluctuations of indicative mean effective pressures (IMEPs) were analyzed while burning 3 fuels separately. Results indicated that the cyclic fluctuation coefficient of in-cylinder pressure was 7.5% while the spark ignition engine burnt gasoline, and the coefficient increased to 7.8% and 13.8% respectively while burning LPG and CNG. The phase space track of in-cylinder pressure was a closed curve with chaos properties showing the intake and exhausting process in sharp curve and the combustion process in arc curve when the initial period structure of combustion was relatively compact and the diffusion was most obvious in the maximum of Y direction, and then it duplicated quickly after reaching the maximum at X axis direction(X axis represents pressure. Compact track distributions were observed while burning gasoline, however, there were partial combustion and lost fire cycles when LPG and CNG

  13. US Department of Energy - Office of FreedomCar and Vehicle Technologies and US Centers for Disease Control and Prevention - National Institute for Occupational Safety and Health Inter-Agency Agreement Research on "The Analysis of Genotoxic Activities of Exhaust Emissions from Mobile Natural Gas, Diesel, and Spark-Ignition Engines"

    Energy Technology Data Exchange (ETDEWEB)

    William E. Wallace

    2006-09-30

    The US Department of Energy-Office of Heavy Vehicle Technologies (now the DOE-Office of FreedomCar and Vehicle Technologies) signed an Interagency Agreement (IAA) with National Institute for Occupational Safety and Health (NIOSH), No.01-15 DOE, 9/4/01, for 'The analysis of genotoxic activities of exhaust emissions from mobile natural gas, diesel, and spark-ignition engines'; subsequently modified on 3/27/02 (DOE IAG No.01-15-02M1); subsequently modified 9/02/03 (IAA Mod No. 01-15-03M1), as 'The analysis of genotoxic activities of exhaust emissions from mobile internal combustion engines: identification of engine design and operational parameters controlling exhaust genotoxicity'. The DOE Award/Contract number was DE-AI26-01CH11089. The IAA ended 9/30/06. This is the final summary technical report of National Institute for Occupational Safety and Health research performed with the US Department of Energy-Office of FreedomCar and Vehicle Technologies under that IAA: (A) NIOSH participation was requested by the DOE to provide in vitro genotoxicity assays of the organic solvent extracts of exhaust emissions from a suite of in-use diesel or spark-ignition vehicles; (B) research also was directed to develop and apply genotoxicity assays to the particulate phase of diesel exhaust, exploiting the NIOSH finding of genotoxicity expression by diesel exhaust particulate matter dispersed into the primary components of the surfactant coating the surface of the deep lung; (C) from the surfactant-dispersed DPM genotoxicity findings, the need for direct collection of DPM aerosols into surfactant for bioassay was recognized, and design and developmental testing of such samplers was initiated.

  14. An experimental investigation of a lean-burn natural-gas pre-chamber spark ignition engine for cogeneration; Swiss Motor. Modification d'un moteur diesel pour le fonctionnement au gaz naturel en cogeneration. Fonctionnement avec prechambre de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Roethlisberger, R.; Favrat, D.

    2001-07-01

    This thesis presented at the Department of Mechanical Engineering of the Swiss Federal Institute of Technology in Lausanne describes the conversion and testing of a commercial diesel engine for use as a lean-burn, natural gas, pre-chamber, spark ignition engine with a rated power of 150 kW, in combined heat and power (CHP) plants. The objective of the investigations - to evaluate the potential of reducing exhaust gas emissions - is discussed in detail with respect to NO{sub x} and CO emissions. The approach adopted includes both experimental work and numerical simulation. The report describes the testing facilities used. The results obtained with experimental spark-plug configurations based on simulation results are presented and the influence of various pre-chamber configuration variants are discussed. The results of the tests are presented and the significant reduction of NO{sub x}, CO and unburned-hydrocarbon (THC) emissions are discussed. The authors state that the engine, which achieves a fuel efficiency of more than 36.5%, fulfils the Swiss requirements on exhaust gas emissions. Also, ways of compensating for the slight loss in fuel-conversion efficiency in the pre-chamber configuration are discussed.

  15. Behaviour analysis of the fuel injected in the intake manifold of port-injected spark ignition engines: modeling and experimental validation; Analyse du comportement du carburant injecte dans les conduits d`admission des moteurs a allumage commande a injection multipoint: modelisation et validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Sches, C.

    1999-01-27

    In order to limit pollutant emissions resulting from transient engine operation, the mastering of mixture formation is essential. In this context, an interactive work was undertaken between a modeling job and an experimental study, to get better understanding of the mechanisms of fuel dynamic behavior in the intake manifold of port-injected spark-ignition engines. The experimental study, elaborated thanks to experimental designs, showed out two essential factors: injection timing and coolant liquid temperature, which act on the fuel dynamic behavior through a second order filter. Then, a phenomenological modeling was established and validated, to analyze the various phenomena influencing mixture formation and to calculate the air/fuel ratio evolutions during transient operation. This program uses the results of a 3D model describing the fuel spray transportation, evaporation and impact on the port walls. The calculation does not need any boundary conditions and the running times are vary satisfactory. We showed that a correct description of the liquid fuel film was necessary to get good prediction of the mixture fuel/air ratio. The spray modeling, which is necessary, can however be kept simple. Future work may develop either in the engine control filed (injection strategies development, optimization of the injection system configuration, ...), or in the theoretical field (better modeling of fuel film displacement or of secondary atomization of the fuel on the intake valve). (author) 79 refs.

  16. 77 FR 9916 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Mobile Cargo...

    Science.gov (United States)

    2012-02-21

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Mobile Cargo... to the control of emissions from new motor vehicles or new motor vehicle engines ] EPA is, pursuant... standards relating to the control of emissions for new motor vehicles and new motor vehicle engines...

  17. Spark ignition engines and diesel engines. Design, function and calculation of two-stroke and four-stroke engines; 11. ed.; Otto- und Dieselmotoren. Arbeitsweise, Aufbau und Berechnung von Zweitakt- und Viertakt-Verbrennungsmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Grohe, H.

    1995-12-31

    The book presents an outline of the design and function of internal combustion engines. It comprises the following chapters: Historical review; fundamentals in mechanics and thermodynamics; calculation methods; ignition; knocking; mixing; load cycles; supercharging; components. (HW) [Deutsch] Das Buch liefert einen Ueberblick ueber Aufbau und Arbeitsweise des Verbrennungsmotors. Aufgliederung in folgende Kapitel: - Historisches Rueckblick; - Mechanische und waermetechnische Grundlagen; - Berechungsverfahren; - Zuendung; - Klopfen; - Gemischbildung; - Ladungswechsel; - Aufladung; - Bauteile. (HW)

  18. In-cylinder flow field in a spark-ignited natural gas engine. 1st Report. In-cylinder flow visualization by PTV; Hibana tenkashiki tennen gas kikan no nenshoshitsunai ni okeru ryudo tokusei. 1. PTV ni yoru ryudoba no kashika

    Energy Technology Data Exchange (ETDEWEB)

    Fukano, Y.; Hisaki, H.; Kida, S. [Osaka Gas Co. Ltd., Osaka (Japan); Kadota, T. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

    1998-02-25

    In-cylinder flow field in a spark-ignited natural gas engine was investigated by the laser light sheet PTV method, which can analyze flow field in a short time. Using a single-cylinder visualization engine, flow field was measured right below and 10 mm, 20 mm, and 40 mm below cylinder head, at various crank angles in intake, compression, and expansion strokes. The results showed that induction-generated swirl was getting concentric to the cylinder center in compression stroke, and was shifted to the outward radial direction in expansion stroke. Swirl velocity increases with the lapse of time, showing its maximum around 20deg BTDC during compression stroke, and varies from cycle to cycle within {+-}5% to its maximum velocity. Squish velocity shows its inward maximum and outward maximum around 20deg BTDC and 20deg ATDC, respectively, and varies from cycle to cycle within {+-}8% to its maximum outward velocity. The maximum outward squish velocity in expansion stroke is about twice as large as the maximum inward squish velocity in compression stroke. 11 refs.

  19. 40 CFR Appendix A to Subpart A of... - State Regulation of Nonroad Internal Combustion Engines

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false State Regulation of Nonroad Internal Combustion Engines A Appendix A to Subpart A of Part 89 Protection of Environment ENVIRONMENTAL PROTECTION...-IGNITION ENGINES General Pt. 89, Subpt. A, App. A Appendix A to Subpart A of Part 89—State Regulation...

  20. 77 FR 9239 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling...

    Science.gov (United States)

    2012-02-16

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling... relating to the control of emissions from new motor vehicles or new motor vehicle engines subject to this... standards (other than crankcase emission standards) for the control of emissions from new motor vehicles or...

  1. 75 FR 43975 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling...

    Science.gov (United States)

    2010-07-27

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling... certification, inspection or any other approval relating to the control of emissions from any new motor vehicle... standards) for the control of emissions from new motor vehicles or new motor vehicle engines prior to March...

  2. Investigation of combustion, performance and emission characteristics of 2-stroke and 4-stroke spark ignition and CAI/HCCI operations in a DI gasoline

    OpenAIRE

    Y. Zhang; Zhao, H.

    2014-01-01

    In order to develop more efficient and cleaner gasoline engines, a number of new engine operating strategies have been proposed and researched on different engines, including the spark ignition (SI) and controlled autoignition (CAI) or HCCI in both 2-stroke and 4-stroke cycles in a poppet valve engine. In this work, a single cylinder direct injection gasoline engine equipped with an electro-hydraulic valve-train system has been commissioned and used to achieve seven different operating modes,...

  3. Laser diagnostic and plasma technological fundamentals of emission and fuel consumption reduction in DI internal combustion engines. Investigation of a plasma ignition system for DI spark ignition engines. Final report; Laserdiagnostische und plasmatechnologische Grundlagen zur Verminderung von Emissionen und Kraftstoffverbrauch von DI-Verbrennungsmotoren. Untersuchung eines Plasmazuendsystems fuer DI-Ottomotoren. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Lepperhoff, G.; Geiger, J.; Wolters, P.; Boewing, R.; Neff, W.

    2000-07-01

    Misfire in stratified DI spark ignition engines may result from cyclic variations of the mixture near the spark plugs. More stable ignition is expected from an initiation of inflammation in a volume range which is significantly larger than the ignition spark of a transistor coil ignition system. the research project investigated the interdependence between electric power supply and the development and propagation of the plasma on a plasma spark plug in space and time. Goals of development are: Development of a system for test stand testing (no electromagnetic interference in the electronic system of the test stand; long-term stability and low variation of the ignition energy; low electrode wear); higher thermal efficiency than conventional transistor coil ignition systems; improved ignition of slow-reacting mixtures with ignition energies below 120 mJ; 'remote' inflammation across a gap of several mm inside the combustion space. [German] Bei geschichtet betriebenen DI-Ottomotoren koennen zyklische Schwankungen in der Gemischzusammensetzung in Zuendkerzennaehe zu Verbrennungsaussetzern fuehren. Durch die Initiierung der Entflammung in einem Volumenbereich, der im Vergleich zum Zuendfunken einer Transistorspulenzuendung (TSZ) deutlich groesser ist, wird eine stabilere Verbrennungseinleitung erwartet. In diesem Forschungsvorhaben liegt der Schwerpunkt auf der Untersuchung des Zusammenhangs zwischen der elektrischen Leistungseinkopplung und der zeitlich-raeumlichen Entstehung und Ausbreitung des Plasmas an einer Plasmazuendkerze. Die wesentlichen Ziele sind: - Darstellung eines pruefstandtauglichen Systems fuer den Betrieb an DI-Ottomotoren (keine elektromagnetische Stoerung der Pruefstandelektronik; Langzeitstabilitaet der Zuendenergie bei kleiner Schwankungsbreite; niedriger Verschleiss der Elektroden) - hoeherer thermischer Wirkungsgrad als konventionelle Transistorspulenzuendungen - verbesserte Zuendung reaktionstraeger Gemische mit Zuendenergien <120 m

  4. Speciation Profiles and Toxic Emission Factors for Nonroad Engines: DRAFT REPORT

    Science.gov (United States)

    This document details the research and development behind how MOVES2014a estimates air toxic emissions for nonroad engines and equipment run on conventional gasoline without ethanol (E0) and gasoline blended with 10% ethanol (E10) as well as diesel fuel, compressed natural gas (C...

  5. 78 FR 721 - California State Nonroad Engine Pollution Control Standards; Transport Refrigeration Units...

    Science.gov (United States)

    2013-01-04

    ... AGENCY California State Nonroad Engine Pollution Control Standards; Transport Refrigeration Units... Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs Operate.'' CARB has...''), regarding its ``Airborne Toxic Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units...

  6. 40 CFR 80.522 - May used motor oil be dispensed into diesel motor vehicles or nonroad diesel engines?

    Science.gov (United States)

    2010-07-01

    ... diesel motor vehicles or nonroad diesel engines? 80.522 Section 80.522 Protection of Environment... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.522 May used motor oil be dispensed into diesel...

  7. A New Family of Nonlinear Observers for SI Engine Air/Fuel Ratio Control

    DEFF Research Database (Denmark)

    Jensen, P. B.; Olsen, M. B.; Poulsen, J.;

    1997-01-01

    The paper treats a newly developed set of nonlinear observers for advanced spark ignition engine control.......The paper treats a newly developed set of nonlinear observers for advanced spark ignition engine control....

  8. Numerical contribution to the characterisation and predictive calculation of mixture formation and combustion in a jet-guided direct-injected spark ignition engine[Dissertation 14937]; Numerischer Beitrag zur Charakterisierung und Vorausberechnung der Gemischbildung und Verbrennung in einem direkteingespritzten, strahlgefuehrten Ottomotor

    Energy Technology Data Exchange (ETDEWEB)

    Koch, T.

    2000-07-01

    The present thesis deals with the thermodynamic, physical and chemical processes inside a jet-guided direct injected spark ignition engine. The main focus on the investigations has been set on the phenomena of mixture formation and combustion. The objective of this work was the development of a physically based, fast model to predict the heat release and pressure evolution. Therefore, numerous fundamental investigations were carried out prior to defining the basis of the phenomenological approach. The dominating influence of the fuel injection has been investigated with extensive three-dimensional simulations of the two-phase flow for quiescent laboratory conditions subsequently experimentally validated as well as for the engine applications. Spray penetration, the evaporation rate and the turbulence influence of the hollow-cone spray have been of particular importance. Comprehensive mainly optically based experiments have also been performed in parallel within the scope of a second thesis. The synergetic combination of numerical with experimental investigations yielded insights into key phenomena and led to a detailed understanding of the relevant combustion-related process. The phenomenological modeling of the determining process of injection, fuel evaporation, mixture formation, ignition, heat release and NO formation has been performed by concentrating on the most significant individual physical phenomena. Thereby the focus has been on the formulation of the combustion by a superposition of a premixed and mixing controlled approach. The newly developed model has been tested for numerous operating conditions in stratified as well as homogenous charge. Additionally, multidimensional operating maps have been simulated which serve as a basis for complete vehicle-cycle computations. (author)

  9. Perspectives of the fully variable valve train univalve on the basis of a 2.0 l spark-ignition engine; Perspektiven des vollvariablen Ventiltriebs Univalve auf Basis eines 2,0-l-Ottomotors

    Energy Technology Data Exchange (ETDEWEB)

    Flierl, R. [Lehrstuhl fuer Verbrennungskraftmaschinen der Technischen Univ. Kaiserslautern (Germany); Entec Consulting GmbH, Hemer (Germany); Gollasch, D. [Lehrstuhl fuer Verbrennungsmotoren der Univ. Kaiserslautern (Germany); Knecht, A.; Pohl, D. [Hydraulik-Ring GmbH, Nuertingen (Germany); Hannibal, W. [Lab. fuer Konstruktion und CAE-Anwendungen, Fachhochschule Suedwestfalen, Iserlohn (Germany); Entec Consulting GmbH, Hemer (Germany)

    2006-07-15

    This article provides the first test results of a fired four cylinder gasoline engin with the new fully variable valve timing system 'Univalve'. This variable valve actuation system is under development by the Hilite / Hydraulik-Ring company for series production engines. The basic investigations are taking place at the University of Kaiserslautern at the institute of combustion engines. Only by changes at the intake valve train, the fuel consumption could be improved by 13% compared to the otherwise identical basic engine. Essential engine functions like torque and emissions were also clearly improved. (orig.)

  10. Homogeneous charge compression ignition (HCCI) - A comparison with spark ignition (SI) operation

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Magnus

    1997-08-01

    Homogeneous Charge Compression Ignition (HCCI) is the third alternative for combustion in engines. Here a homogeneous premixed charge is used as in a spark ignited engine but the charge is compressed to auto-ignition as in a diesel. The characteristics of HCCI was compared to spark ignition (SI) using a 1.6 liter single cylinder engine. Three different fuels were used; isooctane, ethanol and natural gas. HCCI could be used with all three fuels in a single cylinder engine with a fixed compression ratio. Some remarkable results were noted in the experiments. The indicated efficiency of HCCI was much better than for SI operation. The gross indicated efficiency showed values at 50% for the richer cases. This means that the fuel consumption at part load would be reduced to the half compared to SI operation. Very little NO{sub x} was generated with HCCI, only a few ppm. With isooctane, it ranged from 4 to below 1 ppm and with ethanol even lower values. However, HCCI generated more HC and CO. Operation was noisier with HCCI than with SI. Stable and efficient operation with HCCI could be obtained with {lambda} = 3.5 to 9 using isooctane, 3.5 to 6.5 using ethanol, and 2.5 to 3.5 using natural gas. Cycle to cycle variation of combustion was very low. Isooctane could be operated unthrottled without preheating. The selection of the high compression ratio, 21:1, was dependent on the high octane number for natural gas. The attainable IMEP was 5 bar. The limit to make higher IMEP was the rate of combustion. At IMEP 5 bar the main combustion, 10-90% burn duration, took place in less than 2 crank angle degrees (CAD). This is extremely fast and gives very high rate of pressure rise, which leads to noisy operation and high loads on the engine. The lean limit was given by unstable combustion with cycle to cycle variation of combustion, and with high emissions of unburned hydrocarbons and carbon monoxide Examination paper. 15 refs, 38 figs, 1 tab

  11. Spark Ignition of Monodisperse Fuel Sprays. Ph.D. Thesis

    Science.gov (United States)

    Danis, Allen M.; Cernansky, Nicholas P.; Namer, Izak

    1987-01-01

    A study of spark ignition energy requirements was conducted with a monodisperse spray system allowing independent control of droplet size, equivalent ratio, and fuel type. Minimum ignition energies were measured for n-heptane and methanol sprays characterized at the spark gap in terms of droplet diameter, equivalence ratio (number density) and extent of prevaporization. In addition to sprays, minimum ignition energies were measured for completely prevaporized mixtures of the same fuels over a range of equivalence ratios to provide data at the lower limit of droplet size. Results showed that spray ignition was enhanced with decreasing droplet size and increasing equivalence ratio over the ranges of the parameters studied. By comparing spray and prevaporized ignition results, the existence of an optimum droplet size for ignition was indicated for both fuels. Fuel volatility was seen to be a critical factor in spray ignition. The spray ignition results were analyzed using two different empirical ignition models for quiescent mixtures. Both models accurately predicted the experimental ignition energies for the majority of the spray conditions. Spray ignition was observed to be probabilistic in nature, and ignition was quantified in terms of an ignition frequency for a given spark energy. A model was developed to predict ignition frequencies based on the variation in spark energy and equivalence ratio in the spark gap. The resulting ignition frequency simulations were nearly identical to the experimentally observed values.

  12. Performance analysis of a spark-ignition engine, supplied by pre-atomized ethyl alcohol; Analise do desempenho de um motor de ignicao por centelha, alimentado com alcool etilico pre-vaporizado

    Energy Technology Data Exchange (ETDEWEB)

    Galib, F.; Peel, R.B.; Ismail, K.A.R. [Universidade Estadual de Campinas, SP (Brazil)

    1987-12-31

    This paper present the results of performance of a Monza engine with 1600 cm{sup 3} of cylinder capacity and 12:1 compression ratio fueled with pre-vaporized ethyl alcohol. Comparative testes were realized with the same engine using the original carburetor system for various loads conditions in order to demonstrative the advantages and disadvantages of the two methods of fuelling. The production of alcohol vapour was done by means of heat exchanger which utilizes the exhaust gas heat. The system was calculated and assembled in such a was to enable controlling the quantity of vapour necessary for all engine operational conditions. (author). 8 refs., 2 figs

  13. Experimental Study on Stratified and Homogeneous Combustion of a Methanol Direct-Injection Spark-Ignition Engine%甲醇缸内直喷发动机分层燃烧和均质燃烧的试验研究

    Institute of Scientific and Technical Information of China (English)

    李本正; 刘圣华; 农金吉; 宫艳峰

    2009-01-01

    In a methanol direct-injection spark-ignition (DISI) engine retrofitted from a 4-cylinder diesel engine, the fuel needs to be injected into the cylinder near the end of compression stroke to realize the stratified combustion at partial loads for improving fuel economy. However, at high loads, the fuel needs to be injected into cylinder during intake stroke to realize the homogeneous combustion for achieving high power output. The results show that the methanol DISI engine can operate within the excessive air ratio of 2. 23 and its maximum brake thermal efficiency reaches 35. 3%. The methanol DISI engine exhibits higher power output than that of the original diesel engine. The cyclic variations of imep maintains low under a wide range of operating conditions, which shows a stable combustion. NO_x and soot emissions can be de-creased simultaneously.%在一台4缸柴油机改造的火花点火甲醇缸内直喷发动机上,中低负荷时采用分层燃烧来实现好的燃油经济性,高负荷时采用均质燃烧来获得好的动力性能.试验结果表明,甲醇缸内直喷发动机可以实现过量空气系数为2.23的分层稀薄燃烧;发动机的有效热效率最高可达35.3%,远高于普通汽油机;低速转矩大,动力性超过原机水平;在宽广的转速和负荷范围下平均指示压力的循环变动较小,燃烧稳定性好;该甲醇发动机可以实现NO_x和碳烟的同时降低.

  14. Estudio del empleo de un convertidor catalítico para las emisiones gaseosas en un motor de ignición por chispa usando etanol como combustible. // Study of the employment of a catalytic convertor for the gassy emissions in an spark ignition engine using et

    Directory of Open Access Journals (Sweden)

    K. C. R. Martins

    2005-01-01

    Full Text Available Con este trabajo de investigación se estudia el índice de emisiones gaseosas en un motor de ignición por chispa movido conetanol y se analiza el control de estas emisiones con aplicación de un convertidor catalítico platino/paladio (Pt/Pd en elsistema de descarga del motor. Fueron realizados ensayos dinamométricos de un motor de combustión interna MCI paraanalizar las emisiones y el control de estas, en condiciones operacionales, en función de la rotación y ángulo de avance deignición. El convertidor catalítico alcanzó un 75% de eficiencia cuando el ángulo de avance de ignición del motor aumentópara 16o. Se observó que en rotaciones de 2000 r.p.m el convertidor catalítico presentó mayor reducción de las emisionesde hidrocarburos no quemados HC, monóxido de carbono CO y óxidos de nitrógeno NOx. Con la aplicación de unconvertidor catalítico en un vehículo se debe estandarizar nuevas regulaciones en cuanto al ángulo de avance de igniciónpara optimizar el funcionamiento del motor.Palabras claves: Convertidor catalítico; emisiones de escape; eficiencia catalítica; etanol.____________________________________________________________________________Summary.With this investigation work the index of gassy emissions is studied in an spark ignition engine using ethanol, the control ofthese emissions is analyzed with application of a platinum/palladium (Pt/Pd catalytic convector in the engine dischargesystem. Rehearsals carried out in engines in order to analyze the emissions and the control of these, under operationalconditions, in function of the rotation and angle of ignition advance were carried out. The catalytic convector reaches 75%of efficiency when the ignition advance angle of the engine increased to 16o. It was observed that in rotations of 2000r.p.m the catalytic convector presented bigger reduction of the emissions of non-burnt hydrocarbons HC, monoxide ofcarbon CO and nitrogen oxides NOx. With the application of a

  15. Influence of injection pressures till to 1,000 bar on the carburetion in a spark ignition engine with direct injection; Einfluss von Einspritzdruecken bis 1000 bar auf die Gemischbildung in einem Ottomotor mit Direkteinspritzung

    Energy Technology Data Exchange (ETDEWEB)

    Buri, Stefan; Schumann, Florian; Kubach, Heiko; Spicher, Ulrich [Karlsruher Institut fuer Technologie (KIT) (DE). Inst. fuer Kolbenmaschinen (IFKM); Kneifel, Alexander [MTU Friedrichshafen GmbH (Germany)

    2011-07-01

    This paper presents the results of optical investigations of the impact of injection pressures of up to 1000 bar on mixture formation in a spray-guided direct injection engine. The maximum load in stratified operation of an engine with such a spray-guided combustion system is limited by the achievable quality of the mixture. In particular, when using multi hole injectors, the limit of stratified operation is reached rather early, due to comparatively low flow rates and thus insufficient stratification. One measure to increase the flow rate is to increase the injection pressure. The goal of this measure is to generate a more compact stratification, leading to combustion at richer air fuel ratios. This enables reductions of burning duration, hydrocarbon- and particulate emissions. The fundamental impact of increasing the injection pressure from 200 up to 1000 bar on mixture formation was investigated by using LIF- and Mie-scattering in a pressure chamber. Following that, the mixture formation was investigated under real conditions in a single cylinder engine by visualizing the injection process using Mie-scattering. Finally the results of engine operation are compared with those from the pressure chamber. (orig.)

  16. Experimental Research on Effects of Spark-Ignition Engine Fueled with Butanol/Gasoline Blends%燃用丁醇汽油对发动机性能影响的实验研究

    Institute of Scientific and Technical Information of China (English)

    石美玉; 朱荣福; 齐晓杰; 崔宏耀; 安永东; 谭建伟

    2015-01-01

    以汽油为基础油,按照体积分数配制出10%、20%和30%的丁醇汽油混合燃料,研究电喷汽油机在不作改动的情况下,燃用不同比例丁醇汽油混合燃料时的性能变化情况。研究结果表明:在不改变汽油机任何参数的情况下,发动机燃用20%体积掺混率的丁醇汽油,混合燃料的功率和油耗下降并不明显,NOx增加幅度较小,而CO和HC排放明显降低。%Butanol/gasoline blended fuels were mixed based on volume ratio with gasoline (butanol accounted for 10% ,20% and 30% ,respectively) .The effects of different proportion blended fuels on the engine performance were investigated through experiments .The experiment results showed that ,without any modification of the engine ,power ,brake specific fuel consumption and NOx emission of engine fueled with 20% butanol/gasoline blended fuel did not worsen significantly ,but HC and CO emission reduced obviously .

  17. Evaluación de un motor de encendido por chispa trabajando con mezclas etanol-gasolina; Evaluation of the spark-ignition engine fueled with ethanol–gasoline blends

    Directory of Open Access Journals (Sweden)

    Eliezer Ahmed Melo Espinosa

    2012-07-01

    Full Text Available En la presente investigación se realiza un análisis del rendimiento de un motor de encendido por chispa (Lada 1300 al usar como combustible mezclas de etanol con gasolina en un 10%, 20% y 30%. Los parámetros analizados en cada experimento fueron el torque efectivo, la potencia efectiva, el consumo específico de combustible y las emisiones de monóxido de carbono. Los resultados obtenidos se analizaron estadísticamente mediante una comparación de muestras múltiples en el software estadístico Statgraphics Centurion XV.II. Este análisis fue hecho con él con el objetivo de analizar las posibles diferencias entre los parámetros evaluados para cada combustible a una misma rpm. A partir de los resultados obtenidos se pudieron establecer satisfactoriamente dos porcientos adecuados de la mezcla etanol-gasolina para ser utilizado en motores de encendido por chispa (Lada en las condiciones de Cuba y sin hacer modificacionesen el motor. In this investigation an analysis based on the performances of an engine when using blends of anhydrous ethanol with regular gasoline as fuels is carried out. The experiments of the Lada 1300 engine were carriedout for different blends in 10%, 20% and 30% of ethanol in gasoline. The analyzed parameters for each experiment were the effective torque, the effective power, the specific fuel consumption and the carbon monoxide exhausts emissions. The obtained results were statistically analyzed through multiple-sample comparison in the software Statgraphics Centurion XV.II. This analysis was made with the objective of analyzing the possible differences among the evaluated parameters for each fuel to the same rpm. The appropriate percent of the anhydrous ethanol - regular gasoline blends for use in engine (Lada under the Cuba conditions and without making modifications were satisfactorily established.

  18. Start of Injection Impacts on Performance of a Direct-injection Spark-ignition Engine%喷油开始时刻对缸内直喷汽油机性能的影响

    Institute of Scientific and Technical Information of China (English)

    韩文艳; 许思传; 周岳康; 任健康

    2013-01-01

    通过对某涡轮增压缸内直喷汽油机缸内流动、混合气形成及燃烧过程的数值模拟,并借助发动机台架试验中获得的油耗、排放及燃烧数据,研究了喷油开始时刻对发动机性能的影响.结果显示,对于5 000 r ·min-1工况,喷油开始时刻为400°曲轴转角是混合气雾化混合的最佳方案,此时混合气分布比较均匀且点火时刻火花塞附近具有较高的湍动能,10%~90%燃烧持续期最短且HC排放较低,从而使其具有最佳的燃油经济性与燃烧稳定性.而2 000 r· min-1工况的最佳喷油开始时刻推迟了30°曲轴转角.喷油提前,壁面油膜量增加,混合气当量比下降及火花塞附近较低的湍动能使得燃烧速率降低,因此HC排放、燃油经济性及燃烧稳定性均会变差.同样的情况也出现在推迟喷油中,由于混合不充分使得点火时刻混合气均匀度下降,从而使发动机性能恶化.%A numerical simulation was carried out on cylinder flow, mixture formation and combustion process of a turbo-charged gasoline direct injection engine, and then on the basis of the test data about the break specific fuel consumption, emission and combustion, an analysis was made of the best time to start the injection on engine performance.The results show in the case of 5 000 r·min-1, the injection started at 400° crank angle obtains an optimal mixture formation, when it presents the best fuel economy and combustion stability with distribution, the higher turbulence kinetic energy around the spark plug at spark time and the shortest 10% ~90% burning duration as well as the lower HC emission.While the best time to start the injection is retarded at 30° crank angle with 2 000 r·min-1.When the injection starts in advance, the wall film increases, and the decreased equivalence ratio and the lower turbulence kinetic energy around spark lead to a lower burning rate, so HC emissions, fuel economy and combustion stability may go bad

  19. PM Emission Characteristics of Spark-Ignition Engine Fueled with Ethanol/Gasoline Blends%乙醇汽油混合燃料颗粒物排放的特性

    Institute of Scientific and Technical Information of China (English)

    白代彤; 王锡斌; 蔡建; 张红阳

    2012-01-01

    在一台火花点火式发动机上,对燃用不同比例的乙醇汽油混合燃料时的颗粒物排放特性的影响因素进行研究.结果表明,中小负荷时汽油掺醇能够有效地降低颗粒物排放的总数目浓度和质量浓度,如汽油机在平均有效压力为0.34MPa、乙醇掺混比为20%时,颗粒物的总数目浓度和总质量浓度分别比纯汽油下降了84.3%和50.7%.乙醇掺混比的增加使得数目浓度向小粒径方向移动,而点火提前角的减小、平均有效压力的增大和混合气过浓均会使颗粒物数目浓度的峰值向大粒径方向偏移.平均有效压力的减小、点火的推迟和过量空气系数的增加均能使颗粒物的总数目浓度和质量浓度降低.%Experimental studies on particle number and mass concentration distribution were conducted by us- ing electrical low pressure impactor in an SI engine fueled with ethanol/gasoline blends. The total number and mass concentration of particle can be effectively decreased fueled with ethanol/gasoline blends. The total number and mass concentration of particle fueled with E20 decreases by 84.3% and 50.7%, respectively at break mean effective pressure (BMEP) of 0.34 MPa. The diameter of peak number concentration moves to large size direction with increasing the brake mean effective pressure. Delay of ignition timing, decrease of excess air ratio and increase of BMEP move the peak number concentration to large size direction. The total number and mass con- centration of particle decrease with decreasing brake mean effective pressure, advancing ignition timing and increasing excess air ratio.

  20. 76 FR 77515 - California State Nonroad Engine Pollution Control Standards; Ocean-Going Vessels At-Berth in...

    Science.gov (United States)

    2011-12-13

    ... AGENCY California State Nonroad Engine Pollution Control Standards; Ocean-Going Vessels At-Berth in... engines operated on ocean-going vessels at-berth in California ports (``At-Berth Regulation''). The At... airborne toxic control measures (ATCM) for auxiliary diesel engines operated on ocean-going vessels at...

  1. Mitigation of PAH and nitro-PAH emissions from nonroad diesel engines.

    Science.gov (United States)

    Liu, Z Gerald; Wall, John C; Ottinger, Nathan A; McGuffin, Dana

    2015-03-17

    More stringent emission requirements for nonroad diesel engines introduced with U.S. Tier 4 Final and Euro Stage IV and V regulations have spurred the development of exhaust aftertreatment technologies. In this study, several aftertreatment configurations consisting of diesel oxidation catalysts (DOC), diesel particulate filters (DPF), Cu zeolite-, and vanadium-based selective catalytic reduction (SCR) catalysts, and ammonia oxidation (AMOX) catalysts are evaluated using both Nonroad Transient (NRTC) and Steady (8-mode NRSC) Cycles in order to understand both component and system-level effects of diesel aftertreatment on emissions of polycyclic aromatic hydrocarbons (PAH) and their nitrated derivatives (nitro-PAH). Emissions are reported for four configurations including engine-out, DOC+CuZ-SCR+AMOX, V-SCR+AMOX, and DOC+DPF+CuZ-SCR+AMOX. Mechanisms responsible for the reduction, and, in some cases, the formation of PAH and nitro-PAH compounds are discussed in detail, and suggestions are provided to minimize the formation of nitro-PAH compounds through aftertreatment design optimizations. Potency equivalency factors (PEFs) developed by the California Environmental Protection Agency are then applied to determine the impact of aftertreatment on PAH-derived exhaust toxicity. Finally, a comprehensive set of exhaust emissions including criteria pollutants, NO2, total hydrocarbons (THC), n-alkanes, branched alkanes, saturated cycloalkanes, aromatics, aldehydes, hopanes and steranes, and metals is provided, and the overall efficacy of the aftertreatment configurations is described. This detailed summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere.

  2. The concept of isochoric central spark ignition and its fuel gain in inertial fusion

    CERN Document Server

    Kuzmin, A D

    2004-01-01

    One of the best methods in inertial confinement fusion (ICF) is the concept of central spark ignition, consisting of two distinct regions named as hot and cold regions and formed by hydro-dynamical implosion of fuel micro-sphere central spark ignition method in inertial fusion and fuel pellet design condition in fusion power plant has been investigated and fuel gain for isochoric model in this method is calculated. We have shown the effects of different physical parameters of inertial fusion on fuel gain and optimized limit for fuel density and fuel pellet radius has been calculated.

  3. knock characteristics analysis of a supercharged spark ignition ...

    African Journals Online (AJOL)

    user

    1.6 bar, presently [9 – 11] and as the drive to further downsize engines continues ... dynamometer and various test and control equipment. The photographs of the ..... Method using Cylinder pressure, Block Vibration and Sound ressure Signal ...

  4. Effect of Inhibitors on Biogas Laminar Burning Velocity and Flammability Limits in Spark Ignited Premix Combustion

    Directory of Open Access Journals (Sweden)

    Willyanto Anggono

    2014-01-01

    Full Text Available Biogas is the natural byproduct of the decomposition of vegetation or animal manure, of which there are almost in exhaustable supplies in the world, and which does not contribute CO2 or other greenhouse gases to global warming or climate change. Biogas contains 66.4% flammable gas (CH4 and 33.6% inhibitors (CO2 and N2. This study focuses on the effects of inhibitors on biogas laminar burning velocity and flammability limits in spark ignited premix combustion. Spherically expanding laminar premixed flames, freely propagating from spark ignition sources in initially quiescent biogas–air mixtures, are continuously recorded by a high-speed digital camera. Initially, all the experiments in this paper were performed using inhibitorless biogas (biogas without inhibitors at room temperature, at reduced pressure (0.5 atm and at various equivalence ratios (ϕ from the lower flammable limit to the upper flammable limit. The results are compared with those from biogas (containing inhibitors flames at reduced pressure, inhibitorless biogas flames at atmospheric pressure (1 atm, and biogas flames at atmospheric pressure to emphasize the effect of inhibitors on biogas laminar burning velocity and flammability limits. Compared to an inhibitorless biogas-air mixtures, in the biogas-air mixtures, the presence of inhibitors cause a reduction in the laminar burning velocity and the flammable limits become narrower.

  5. Enhancement of flame development by microwave-assisted spark ignition in constant volume combustion chamber

    KAUST Repository

    Wolk, Benjamin

    2013-07-01

    The enhancement of laminar flame development using microwave-assisted spark ignition has been investigated for methane-air mixtures at a range of initial pressures and equivalence ratios in a 1.45. l constant volume combustion chamber. Microwave enhancement was evaluated on the basis of several parameters including flame development time (FDT) (time for 0-10% of total net heat release), flame rise time (FRT) (time for 10-90% of total net heat release), total net heat release, flame kernel growth rate, flame kernel size, and ignitability limit extension. Compared to a capacitive discharge spark, microwave-assisted spark ignition extended the lean and rich ignition limits at all pressures investigated (1.08-7.22. bar). The addition of microwaves to a capacitive discharge spark reduced FDT and increased the flame kernel size for all equivalence ratios tested and resulted in increases in the spatial flame speed for sufficiently lean flames. Flame enhancement is believed to be caused by (1) a non-thermal chemical kinetic enhancement from energy deposition to free electrons in the flame front and (2) induced flame wrinkling from excitation of flame (plasma) instability. The enhancement of flame development by microwaves diminishes as the initial pressure of the mixture increases, with negligible flame enhancement observed above 3. bar. © 2013 The Combustion Institute.

  6. 40 CFR Table 1a to Subpart Zzzz of... - Emission Limitations for Existing, New, and Reconstructed Spark Ignition, 4SRB Stationary RICE...

    Science.gov (United States)

    2010-07-01

    ... pursuant to the requirements of 40 CFR 63.6(g) for alternative work practices. ..., and Reconstructed Spark Ignition, 4SRB Stationary RICE >500 HP Located at a Major Source of HAP... Limitations for Existing, New, and Reconstructed Spark Ignition, 4SRB Stationary RICE >500 HP Located at...

  7. 40 CFR Table 1b to Subpart Zzzz of... - Operating Limitations for Existing, New, and Reconstructed Spark Ignition, 4SRB Stationary RICE...

    Science.gov (United States)

    2010-07-01

    ..., New, and Reconstructed Spark Ignition, 4SRB Stationary RICE >500 HP Located at a Major Source of HAP... Limitations for Existing, New, and Reconstructed Spark Ignition, 4SRB Stationary RICE >500 HP Located at a... stationary RICE complying with the requirement to reduce formaldehyde emissions by 76 percent or more (or...

  8. Laser-induced spark ignition of H2/O2/Ar mixtures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Laser-induced spark ignition of hydrogen-oxygen-argon mixtures was experimentally investigated using a Q-swiched Nd:YAG laser to break down the gas at 532 nm. The laser-based high-speed schlieren system was employed to record flame front evolution for the gas mixtures with different initial pressure or laser output energy or argon dilution. The results show that the breakdown of the gas leads to the generation of ellipsoidal plasma. The rarefaction waves create the toroidal rings at the leading and trailing edges of the plasma, which provides a reasonable explanation for inward wrinkle of the plasma and the resultant flame. The toroidal rings at leading edge decays more rapidly and a gas lobe is generated that moves towards the laser. The hot gas in the plasma induces the generation of the spark kernel. Affected by the very weak shock wave or compression waves reflected off the wall, the initial laminar flame decelerates. The arc flame front interactions with the wall, reversed shock wave or compression waves, rarefaction waves, etc. induce the transition from laminar flame to turbulent one. These induce the transition from laminar flame to turbulent flame. For stoichiometric hydrogen-oxygen mixtures diluted by 76.92% argon at an initial pressure of 53.33 kPa, the minimum output energy of the laser is 15 mJ for successful laser-induced spark ignition. With increasing initial pressure or the output energy of the laser, or decreasing argon dilution, the speed of the flame front increases.

  9. Investigations of the causes of hydrocarbon emissions in spark ignition engines with homogeneous charge compression ignition (HCCI). A report of the Institute for Internal Combustion Engines and Automotive Engineering, TU Vienna (IVK); Untersuchung der Ursachen fuer Kohlenwasserstoff-Emissionen beim Ottomotor mit homogener Selbstzuendung (HCCI). Bericht des Instituts fuer Verbrennungskraftmaschinen und Kraftfahrzeugbau derTechnischen Universitaet Wien (IVK)

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, B. (ed.) [Technische Univ., Vienna (Austria); Loch, A.

    2007-07-01

    The main aim of research and development in the field of internal combustion engine is to create an engine with low fuel consumption and hence low carbon dioxide emissions to meet future emissions regulations as well as providing a good driving experience. Homogeneous charge compression ignition (HCCI) is an alternative combustion process being currently developed that promises a good fuel consumption rate and low nitrogen oxide emissions for the gasoline engine. The only legally restricted exhaust gas emissions for this combustion process are carbon monoxide (CO) and hydrocarbons (HC). The aim of this research was a better understanding of the causes and sources of hydrocarbon emissions with HCCI using gasoline so as to further reduce hydrocarbon emissions. A description of the HCCI combustion process is followed by a list of the known sources of hydrocarbon emission in conventional gasoline engines and current knowledge of the causes of hydrocarbon emission with HCCI. It is assumed that many of the known causes of hydrocarbon emissions in the conventional gasoline combustion process are the same for HCCI. For this reason, this study focused on combustion and carburation, which is where the combustion processes differ the most. (orig.)

  10. The effect of charge motion on mixture preparation and ignition for spark ignition engines with homogeneous combustion processes. A report of the Institute forInternal Combustion Engines and Automotive Engineering, TU Vienna; Einfluss der Ladungsbewegung auf Gemischbildung und Entzuendung bei Otto-Motoren mit homogenen Brennverfahren. Bericht des Instituts fuer Verbrennungskraftmaschinen und Kraftfahrzeugbau der Technischen Universitaet Wien (IVK)

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, B. (ed.); Lauer, T.

    2007-07-01

    The wish to go easy on global oil-resources and the compatibility of environment and traffic are subject of public interest. Therefore, measures must be taken for gasoline engines regarding fuel consumption and CO{sub 2}-emissions. The dethrottling of the intake system by means of residual gas recirculation is a well known measure to reduce the fuel consumption. However, high residual gas concentrations cause a delayed combustion and increased cyclic variations. The specific initiation of charge motion and turbulence in the combustion chamber accelerates and stabilizes the combustion and thus compensates the effects caused by high residual gas concentrations. Because of these complex interactions it is desirable to have the possibility to evaluate the residual gas tolerance of the combustion process at low-load engine operation already during the concept phase. Therefore, it was the aim of this study to develop a method based on numerical simulation that allows a prediction of the combustion stability margin for SI engines with homogeneous combustion for arbitrary in-cylinder flow. Investigations that were carried out with the CFD-method confirmed the acceleration of the combustion with increased turbulence. Further the supporting effect of charge motion on mixture preparation could be pointed out. However, combustion processes with highest swirl-numbers caused a vertical mixture stratification in the combustion chamber with lean mixture at the spark plug resulting in a lower residual gas tolerance. A threshold for a stable combustion could be determined by analyzing the properties of the cylinder charge by means of the flame theory method what further enabled the prediction of the residual gas tolerance of the combustion process and the potential to reduce the fuel consumption. A good correlation between the predicted values of the external residual gas recirculation rate and measurements at the engine test bench could be found. Although improvements of the

  11. Effect of biodiesel fuel on "real-world", nonroad heavy duty diesel engine particulate matter emissions, composition and cytotoxicity.

    Science.gov (United States)

    Martin, Nathan; Lombard, Melissa; Jensen, Kirk R; Kelley, Patrick; Pratt, Tara; Traviss, Nora

    2017-05-15

    Biodiesel is regarded by many as a "greener" alternative fuel to petroleum diesel with potentially lower health risk. However, recent studies examining biodiesel particulate matter (PM) characteristics and health effects are contradictive, and typically utilize PM generated by passenger car engines in laboratory settings. There is a critical need to analyze diesel and biodiesel PM generated in a "real-world" setting where heavy duty-diesel (HDD) engines and commercially purchased fuel are utilized. This study compares the mass concentrations, chemical composition and cytotoxicity of real-world PM from combustion of both petroleum diesel and a waste grease 20% biodiesel blend (B20) at a community recycling center operating HDD nonroad equipment. PM was analyzed for metals, elemental/organic carbon (EC/OC), polycyclic aromatic hydrocarbons (PAHs), and nitro-polycyclic aromatic hydrocarbons (N-PAHs). Cytotoxicity in a human lung epithelial cell line (BEAS-2B) following 24h exposure to the real-world particles was also evaluated. On average, higher concentrations for both EC and OC were measured in diesel PM. B20 PM contained significantly higher levels of Cu and Mo whereas diesel PM contained significantly higher concentrations of Pb. Principal component analysis determined Mo, Cu, and Ni were the metals with the greatest loading factor, suggesting a unique pattern related to the B20 fuel source. Total PAH concentration during diesel fuel use was 1.9 times higher than during B20 operations; however, total N-PAH concentration was 3.3 times higher during B20 use. Diesel PM cytotoxicity was 8.5 times higher than B20 PM (p<0.05) in a BEAS-2B cell line. This study contributes novel data on real-world, nonroad engine sources of metals, PAH and N-PAH species, comparing tailpipe PM vs. PM collected inside the equipment cabin. Results suggest PM generated from burning petroleum diesel in nonroad engines may be more harmful to human health, but the links between exposure

  12. Performance and emissions assessment of n-butanol–methanol–gasoline blends as a fuel in spark-ignition engi

    Directory of Open Access Journals (Sweden)

    Ashraf Elfasakhany

    2016-09-01

    Full Text Available The sleek of using alternatives to gasoline fuel in internal combustion engines becomes a necessity as the environmental problems of fossil fuels as well as their depleted reserves. This research presents an experimental investigation into a new blended fuel; the effects of n-butanol–methanol–gasoline fuel blends on the performance and pollutant emissions of an SI (spark-ignition engine were examined. Four test fuels (namely 0, 3, 7 and 10 volumetric percent of n-butanol–methanol blends at equal rates, e.g., 0%, 1.5%, 3.5% and 5% for n-butanol and methanol, in gasoline were investigated in an engine speed range of 2600–3400 r/min. In addition, the dual alcohol (methanol and n-butanol–gasoline blends were compared with single alcohol (n-butanol–gasoline blends (for the first time as well as with the neat gasoline fuel in terms of performance and emissions. The experimental results showed that the addition of low content rates of n-butanol–methanol to neat gasoline adversely affects the engine performance and exhaust gas emissions as compared to the results of neat gasoline and single alcohol–gasoline blends; in particular, a reduction in engine volumetric efficiency, brake power, torque, in-cylinder pressure, exhaust gas temperature and CO2 emissions and an increase in concentrations of CO and UHC (unburned hydrocarbons emissions were observed for the dual alcohols. However, higher rates of n-butanol–methanol blended in gasoline were observed to improve the SI engine performance parameters and emission concentration. Oppositely the higher rates of single alcohol–gasoline blends were observed to provide adverse results, e.g., higher emissions and lower performance than those of lower rates of single alcohol. Finally, dual alcohol–gasoline blends could exceed (i.e. provide higher performance and lower emissions single alcohol–gasoline blends and pure gasoline at higher rates (>10 vol.% in the blend and, in turn, it is

  13. Development of medium-sized medium-speed lean burn spark-ignited gas engines. Analyzing local gas composition within the main combustion chamber and optimizing the design factors of a jet hole in the pre-combustion chamber; Chugata chusoku kihakunensho gas engine no kaihatsu kenkyu. Nenshoshitsunai kyokusho gas sosei no bunseki to yonenshoshitsu funko sekkei yoso no saitekika ni kansuru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Goto, S.; Sakagami, T.; Hashimoto, T. [Niigata Engineering Co. Ltd., Tokyo (Japan)

    1996-10-25

    A high-speed gas sampling method was used to analyze the local gas composition within the main combustion chamber of a lean burn gas engine with a 260 mm bore. The spatial distribution of the gas composition and changes every crank angle were studied. The optimum design of a jet hole in the pre-combustion chamber was then investigated based on these results, with the aim of reducing CO and THC concentration and increasing the thermal efficiency. The engineering findings were evaluated by means of a performance test on a 6 cylinder engine. 4 refs., 10 figs., 1 tab.

  14. Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin.

    Science.gov (United States)

    Fujita, Eric M; Zielinska, Barbara; Campbell, David E; Arnott, W Patrick; Sagebiel, John C; Mazzoleni, Lynn; Chow, Judith C; Gabele, Peter A; Crews, William; Snow, Richard; Clark, Nigel N; Wayne, W Scott; Lawson, Douglas R

    2007-06-01

    The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used

  15. The organic composition of diesel particulate matter, diesel fuel and engine oil of a non-road diesel generator.

    Science.gov (United States)

    Liang, Fuyan; Lu, Mingming; Keener, Tim C; Liu, Zifei; Khang, Soon-Jai

    2005-10-01

    Diesel-powered equipment is known to emit significant quantities of fine particulate matter to the atmosphere. Numerous organic compounds can be adsorbed onto the surfaces of these inhalable particles, among which polycyclic aromatic hydrocarbons (PAHs) are considered potential occupational carcinogens. Guidelines have been established by various agencies regarding diesel emissions and various control technologies are under development. The purpose of this study is to identify, quantify and compare the organic compounds in diesel particulate matter (DPM) with the diesel fuel and engine oil used in a non-road diesel generator. Approximately 90 organic compounds were quantified (with molecular weight ranging from 120 to 350), which include alkanes, PAHs, alkylated PAHs, alkylbenzenes and alkanoic acids. The low sulfur diesel fuel contains 61% alkanes and 7.1% of PAHs. The identifiable portion of the engine oil contains mainly the alkanoic and benzoic acids. The composition of DPM suggests that they may be originated from unburned diesel fuel, engine oil evaporation and combustion generated products. Compared with diesel fuel, DPM contains fewer fractions of alkanes and more PAH compounds, with the shift toward higher molecular weight ones. The enrichment of compounds with higher molecular weight in DPM may be combustion related (pyrogenic).

  16. Mean Value Modelling of Turbocharged SI Engines

    DEFF Research Database (Denmark)

    Müller, Martin; Hendricks, Elbert; Sorenson, Spencer C.

    1998-01-01

    The development of a computer simulation to predict the performance of a turbocharged spark ignition engine during transient operation. New models have been developed for the turbocharged and the intercooling system. An adiabatic model for the intake manifold is presented....

  17. 78 FR 36135 - Heavy-Duty Engine and Vehicle, and Nonroad Technical Amendments

    Science.gov (United States)

    2013-06-17

    ... source sector, after light-duty passenger cars and trucks. The final rule was published in the Federal... technologies (such as Rankine engines, electric vehicles and fuel cell vehicles), in order to generate advanced... fuel conversion regulations to provide clarity regarding the applicability of the fuel...

  18. 76 FR 38153 - California State Nonroad Engine Pollution Control Standards; Commercial Harbor Craft Regulations...

    Science.gov (United States)

    2011-06-29

    ... Innovative Strategies Division, Office of Transportation and Air Quality, U.S. Environmental Protection... strategy (DECS) determined by CARB to be the greatest feasible reduction of NO X or PM when used with the... marine engines in ferries, excursion vessels, tugboats, towboats, push boats, and multipurpose harbor...

  19. 78 FR 49963 - Heavy-Duty Engine and Vehicle and Nonroad Technical Amendments

    Science.gov (United States)

    2013-08-16

    ... within a test group based on engine code, transmission type and gear ratios, final drive ratio, and other... configurations within each test group and transmission type (instead of configurations within each base level and... performed on the basis of test group and transmission type (instead of the model-type basis specified in...

  20. Qualification des logiciels numériques. Application à un logiciel d'analyse de la combustion dans les moteurs à allumage commandé Qualification of Numerical Software. Application to a Software for Analysing Combustion in Spark-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Vignes J.

    2006-11-01

    -point arithmetic and highlighting the serious consequences it may have on the results obtained, we describe a probabilistic approach to the analysis of round-off errors, the CESTAC (Contrôle et Estimation STochastique des Arrondis de Calculs method, from the standpoint of both its theoritical bases and its practical implementation. This method has given rise to a new arithmetic, called stochastic arithmetic, the principal properties of which are summed up. Likewise, a probabilistic approach estimating the influence of data errors is described. A software called CADNA (Control of Accuracy and Debugging for Numerical Applications able to automaticaly implement stochastic arithmetic in any Fortran program, is described in this paper. When used in programs implementing the three classes of numerical computing methods (finite, iterative and approximate methods, it can detect numerical instabilities, control branchings and provide accuracy of the results considering the propagation of round-off errors and data errors. It is an efficient tool for validating the results of numerical software. The second part is devoted to the use of the CADNA software for qualifying the simulation software, ANALCO (ANALyse de COmbustion which analyses combustion in spark-ingnition engines. After a description of the normal model of the phenomenon being analyzed and after mathematical model has been deduced, the ANALCO simulation software is described. The results obtained with ANALCO, not using CADNA, reveal the disagreement between the simulation results and the experimental results. The use of the CADNA software eliminates the numerical instabilties, controls the execution of the program and demonstrates that the disagreement between the simulation results and the results observed is due only to numerical problems. Likewise, the CADNA software brings out both the validity range of the model in the light of the data errors and the data that make the mathematical model the most sensitive. From this

  1. Effects of Intermediate Ethanol Blends on Legacy Vehicles and Small Non-Road Engines, Report 1

    Energy Technology Data Exchange (ETDEWEB)

    Knoll, Keith [National Renewable Energy Lab. (NREL), Golden, CO (United States); West, Brian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Clark, Wendy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Graves, Ronald [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Orban, John [Battelle Memorial Inst., Columbus, OH (United States); Przesmitzki, Steve [National Renewable Energy Lab. (NREL), Golden, CO (United States); Theiss, Timothy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2009-02-01

    This report (February 2009) is an update of the original version, which was published in October 2008. This report is the result of the U.S. Department of Energy's test program to evaluate the potential impacts of intermediate ethanol blends on legacy vehicles and other engines. The purpose of the test program is to assess the viability of using intermediate blends as a contributor to meeting national goals in the use of renewable fuels.

  2. Emission reduction in spark ignition engines. Final report; Emissionssenkung an Ottomotoren. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Heuser, P.; Weem, D. van der; Erz, R.; Stein, P.; Metzger, O.; Wenzel, S.

    2000-04-01

    A new powertrain for passenger cars was designed, constructed and tested which reduces fuel consumption and exhaust emissions by a combination of throttle-free load control and cylinder switch-off. The system will be tested in a serially produced car. Economic efficiency will be optimized, and interested producers will be addressed with a view to serial production. [German] Im Rahmen des Gesamtvorhabens soll ein neues System fuer den Pkw-Antrieb konzipiert, konstruiert, gefertigt und erprobt werden, mit deren Hilfe durch eine Kombination von drosselfreier Laststeuerung und Zylinderabschaltung der Kraftstoffverbrauch und die Abgasemissionen von Ottomotoren massgebend reduziert werden. Die Potentiale sollen in einem serienmaessigen Fahrzeug dargestellt werden. Projektziel ist die Darstellung eines voll funktionsfaehigen Fahrzeugs, an dem die Potentiale bzgl. Verbrauch, Abgasemissionen, Drehmoment und Leistung, die Erfuellung von Komfortanforderungen sowie die generelle Realisierbarkeit bei konkurrenzfaehigen Entwicklungs- und Herstellungskosten und niedrigem energetischen Produktionsaufwand des oben genannten Systems demonstriert wird, um anschliessend potentielle Anwender aus der Automobilindustrie fuer die Umsetzung in die Serie zu gewinnen. (orig.)

  3. Propellant Flow Actuated Piezoelectric Rocket Engine Igniter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Spark ignition of a bi-propellant rocket engine is a classic, proven, and generally reliable process. However, timing can be critical, and the control logic,...

  4. The influence of CO2 in biogas flammability limit and laminar burning velocity in spark ignited premix combustion at various pressures

    Science.gov (United States)

    Anggono, W.; Wardana, I. N. G.; Lawes, M.; Hughes, K. J.; Wahyudi, S.; Hamidi, N.; Hayakawa, A.

    2016-03-01

    Biogas is an alternative energy source that is sustainable and renewable containing more than 50% CH4 and its biggest impurity or inhibitor is CO2. Demands for replacing fossil fuels require an improved fundamental understanding of its combustion processes. Flammability limits and laminar burning velocities are important characteristics in these processes. Thus, this research focused on the effects of CO2 on biogas flammability limits and laminar burning velocities in spark ignited premixed combustion. Biogas was burned in a spark ignited spherical combustion bomb. Spherically expanding laminar premixed flames, freely propagating from spark ignition in initial, were continuously recorded by a high-speed digital camera. The combustion bomb was filled with biogas-air mixtures at various pressures, CO2 levels and equivalence ratios (ϕ) at ambient temperature. The results were also compared to those of the previous study into inhibitorless biogas (methane) at various pressures and equivalence ratios (ϕ). Either the flammable areas become narrower with increased percentages of carbon dioxide or the pressure become lower. In biogas with 50% CO2 content, there was no biogas flame propagation for any equivalence ratio at reduced pressure (0.5 atm). The results show that the laminar burning velocity at the same equivalence ratio declined in respect with the increased level of CO2. The laminar burning velocities were higher at the same equivalence ratio by reducing the initial pressure.

  5. 40 CFR 90.423 - Exhaust gas analytical system; CVS grab sample.

    Science.gov (United States)

    2010-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19... analytical systems used for analyzing CVS grab “bag” samples from spark-ignition engines. Since various... components such as instruments, valves, solenoids, pumps and switches may be used to provide...

  6. Problems in event based engine control

    DEFF Research Database (Denmark)

    Hendricks, Elbert; Jensen, Michael; Chevalier, Alain Marie Roger

    1994-01-01

    Physically a four cycle spark ignition engine operates on the basis of four engine processes or events: intake, compression, ignition (or expansion) and exhaust. These events each occupy approximately 180° of crank angle. In conventional engine controllers, it is an accepted practice to sample...... the engine variables synchronously with these events (or submultiples of them). Such engine controllers are often called event-based systems. Unfortunately the main system noise (or disturbance) is also synchronous with the engine events: the engine pumping fluctuations. Since many electronic engine...... problems on accurate air/fuel ratio control of a spark ignition (SI) engine....

  7. Particle- and gas-phase PAHs toxicity equivalency quantity emitted by a non-road diesel engine with non-thermal plasma technology.

    Science.gov (United States)

    Gao, Jianbing; Ma, Chaochen; Xing, Shikai; Zhang, Yajie; Liu, Jiangquan; Feng, Hao

    2016-10-01

    Polycyclic aromatic hydrocarbon (PAH) toxicity equivalency quantity (TEQ, denoted by benzo(a)pyrene equivalent (BaPeq) concentration) is more meaningful when evaluating the influence of non-road diesel engines PAH toxicity on environment. Particle- and gas-phase PAH BaPeq concentrations were calculated based on gas chromatography-mass spectrometer (GC-MS) results and toxic equivalency factors. A non-thermal plasma (NTP) reactor was applied to a non-road diesel engine to decrease PAH TEQ content. Only the gas-phase Nap BaPeq concentration increased slightly with the action of NTP at three different generator power outputs. BaP dominated the BaPeq concentration for 15 samples with, and without NTP except in the gas-phase at 4 kW. Almost all medium molecular weight (MMW) and high molecular weight (HMW) PAH TEQs increased for particle- and gas-phases at 3 kW power output compared to 2 kW without the use of NTP. Particle-phase Nap, Acp, and AcPy (low molecular weight, LMW) TEQ were under detection at 3 and 4 kW, while gas-phase BkF, IND, DBA, and BghiP (HMW) concentrations were below the limits of detection. The most abundant PAH TEQ compounds were MMW and HMW PAHs for gas- and particle-phase while they were BaA, CHR, BbF, BaP, and IND for PM aggregation. The total BaPeq emission factors were 15.1, 141.4, and 46.5 μg m(-3) at three engine loads, respectively. Significant BaPeq concentration percentage reduction was obtained (more than 80 and 60 %) with the use of NTP for particle- and gas-phases. A high TEQ content was observed for PM aggregation (38.8, 98.4, and 50.0 μg kg(-1)) which may have caused secondary PAH toxicity emissions. With the action of NTP, the breakup of MMW and HMW into LMW PAHs led to reduction of some PAH concentrations.

  8. Physicochemical and toxicological characteristics of particulate matter emitted from a non-road diesel engine: comparative evaluation of biodiesel-diesel and butanol-diesel blends.

    Science.gov (United States)

    Zhang, Zhi-Hui; Balasubramanian, Rajasekhar

    2014-01-15

    Combustion experiments were conducted to evaluate the effects of using blends of ultralow sulfur diesel (ULSD) with biodiesel or n-butanol on physicochemical and toxicological characteristics of particulate emissions from a non-road diesel engine. The results indicated that compared to ULSD, both the blended fuels could effectively reduce the particulate mass and elemental carbon emissions, with butanol being more effective than biodiesel. The proportion of organic carbon and volatile organic compounds in particles increased for both blended fuels. However, biodiesel blended fuels showed lower total particle-phase polycyclic aromatic hydrocarbons (PAHs) emissions. The total number emissions of particles ≤560nm in diameter decreased gradually for the butanol blended fuels, but increased significantly for the biodiesel blended fuels. Both the blended fuels indicated lower soot ignition temperature and activation energy. All the particle extracts showed a decline in cell viability with the increased dose. However, the change in cell viability among test fuels is not statistically significant different with the exception of DB-4 (biodiesel-diesel blend containing 4% oxygen) used at 75% engine load. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. An Analysis of Direct-injection spark-ignition (DISI) soot morphology

    Energy Technology Data Exchange (ETDEWEB)

    Barone, Teresa L [ORNL; Storey, John Morse [ORNL; Youngquist, Adam D [ORNL; Szybist, James P [ORNL

    2012-01-01

    We have characterized particle emissions produced by a 4-cylinder, 2.0 L DISI engine using transmission electron microscopy (TEM) and image analysis. Analyses of soot morphology provide insight to particle formation mechanisms and strategies for prevention. Particle emissions generated by two fueling strategies were investigated, early injection and injection modified for low particle number concentration emissions. A blend of 20% ethanol and 80% emissions certification gasoline was used for the study given the likelihood of increased ethanol content in widely available fuel. In total, about 200 particles and 3000 primary soot spherules were individually measured. For the fuel injection strategy which produced low particle number concentration emissions, we found a prevalence of single solid sub-25 nm particles and fractal-like aggregates. The modal diameter of single solid particles and aggregate primary particles was between 10 and 15 nm. Solid particles as small as 6 nm were present. Although nanoparticle aggregates had fractal-like morphology similar to diesel soot, the average primary particle diameter per aggregate had a much wider range that spanned from 7 to 60 nm. For the early fuel injection strategy, liquid droplets were prevalent, and the modal average primary particle diameter was between 20 and 25 nm. The presence of liquid droplets may have been the result of unburned fuel and/or lubricating oil originating from fuel impingement on the piston or cylinder wall; the larger modal aggregate primary particle diameter suggests greater fuel-rich zones in-cylinder than for the low particle number concentration point. However, both conditions produced aggregates with a wide range of primary particle diameters, which indicates heterogeneous fuel and air mixing.

  10. 77 FR 497 - Control of Emissions From New Nonroad Compression-Ignition Engines: Approval of New Scheduled...

    Science.gov (United States)

    2012-01-05

    ... catalytic converters and if the engines are at or above 130 kW then a manufacturer may not schedule the catalytic converter maintenance more frequently than 4,500 hours. In addition, should a manufacturer desire... perform during service accumulation on emission-data engines) not found under Sec. 1039.125(a)(2) and...

  11. Statistical Engine Knock Control

    DEFF Research Database (Denmark)

    Stotsky, Alexander A.

    2008-01-01

    A new statistical concept of the knock control of a spark ignition automotive engine is proposed . The control aim is associated with the statistical hy pothesis test which compares the threshold value to the average value of the max imal amplitud e of the knock sensor signal at a given freq uency...

  12. Study of Adding Ethanol to Gasoline Effects on Produced Noise Intensity of Single Cylinder Spark Ignition Engine

    Directory of Open Access Journals (Sweden)

    Adel Mahmoud Saleh

    2011-01-01

    Full Text Available ????? ??????? ??????? ?? ???????? ???????? ???????? ?? ??????? ????? ??????? ?? ??? 1990? ????? ????? ??????? (?????? ??? ??????? ??? ??? ????????? ??????? ???? ???????? ???? ??? ?????? ????? ???????? ??????? ??????? ????? ?? ???????. ????? ?? ??? ??? ?????? ???? ????????? ???????? ?? ??????? ??????? ??? ?? ??? ???????? ??????? ?? ????? ?????????? ???????? ???? ??????? ??????? ?? ???????? ??? ?????? ????? ???????? ??????? ??? ?????? ? ??????? ?????.?? ??? ????? ????? ????? ??? ???? ?????? ????? ?? ??????? ????? ???? ?????? ????????? ??? ?????????? ????? ???????? ???? ??????? ???? ????? ??? ????? ??????? ????? 10 ? 20%? ????? ??????? ???? ???? ??? ??????? ???? ???????? ????? ??????? ?? ????? ????? ??????? ????? ?????? ??? ?? ??????? ???? ?????? ??? ????? ??????? ??? ????? ?????? ?? ???? ????? ??? ????? ????? ??????? ?? ??????? ??? ????? ??????? ?? ??????? ???? ???? ???? ???? ?????? ??????? ????? ?????.

  13. On the study of threshold intensity dependence on the gain and loss processes in laser induced spark ignition of molecular hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Omar, M. M., E-mail: magdymomar@gmail.com; Aboulfotouh, A. M. [Department of physics, Faculty of Science, Cairo University, Giza (Egypt); Gamal, Y. E. E. [National Institute of Laser Enhanced Sciences, Cairo University, Giza (Egypt)

    2015-03-30

    In the present work, a numerical analysis is performed to investigate the comparative contribution of the mechanisms responsible for electron gain and losses in laser spark ignition and plasma formation of H{sub 2}. The analysis considered H{sub 2} over pressure range 150 -3000 torr irradiated by a Nd:YAG laser radiation at wavelengths 1064 and 532 nm with pulse length 5.5 ns. The study based on a modified electron cascade model by one of the authors which solves numerically the time dependent Boltzmann equation as well as a set of rate equations that describe the rate of change of the excited states population. The model includes most of the physical processes that might take place during the interaction. Computations of The threshold intensity are performed for the combined and separate contribution of each of the gain and loss processes. Reasonable agreement with the measured values over the tested pressure range is obtained only for the case of the combined contribution. Basing on the calculation of the electron energy distribution function, the determined relations of the time evolution of the electrons density for selected values of the tested gas pressure region revealed that photo-ionization of the excited states could determine the time of electron generation and hence spark ignition. Collisional ionization contributes to this phenomenon only at the high pressure regime. Loss processes due to electron diffusion, vibrational excitation are found to have significant effect over examined pressure values for the two applied laser wavelengths.

  14. Free-piston Stirling hydraulic engine and drive system for automobiles

    Science.gov (United States)

    Beremand, D. G.; Slaby, J. G.; Nussle, R. C.; Miao, D.

    1982-01-01

    The calculated fuel economy for an automotive free piston Stirling hydraulic engine and drive system using a pneumatic accumulator with the fuel economy of both a conventional 1980 spark ignition engine in an X body class vehicle and the estimated fuel economy of a 1984 spark ignition vehicle system are compared. The results show that the free piston Stirling hydraulic system with a two speed transmission has a combined fuel economy nearly twice that of the 1980 spark ignition engine - 21.5 versus 10.9 km/liter (50.7 versus 25.6 mpg) under comparable conditions. The fuel economy improvement over the 1984 spark ignition engine was 81 percent. The fuel economy sensitivity of the Stirling hydraulic system to system weight, number of transmission shifts, accumulator pressure ratio and maximum pressure, auxiliary power requirements, braking energy recovery, and varying vehicle performance requirements are considered. An important finding is that a multispeed transmission is not required. The penalty for a single speed versus a two speed transmission is about a 12 percent drop in combined fuel economy to 19.0 km/liter (44.7 mpg). This is still a 60 percent improvement in combined fuel economy over the projected 1984 spark ignition vehicle.

  15. Wideband SI Engine Lambda Control

    DEFF Research Database (Denmark)

    Jensen, Per Buchbjerg; Olsen, Mads Bruun; Poulsen, Jannik

    1998-01-01

    Long term control of the AFR (Air/Fuel Ratio) of spark ignition engines is currently accomplished with a self-oscialling PI control loop. Because of the intake/exhaust time delay, the oscillation frequency and hence bandwidth of this loop is small. This paper describes a new approach to the desig...

  16. 77 FR 76883 - Approval and Promulgation of Implementation Plans and Designation of Areas for Air Quality...

    Science.gov (United States)

    2012-12-31

    ... standards, nonroad spark-ignition engines and recreational engines standards, large nonroad diesel engine... and includes emission reductions associated with CAIR, EPA's modeling indicates that the area would... initial matter, EPA notes that the modeling EPA conducted during the rulemaking for the CSAPR...

  17. Mean Value Modelling of a Turbocharged SI Engine

    DEFF Research Database (Denmark)

    Müller, Martin; Hendricks, Elbert; Sorenson, Spencer C.

    1998-01-01

    An important paradigm for the modelling of naturallly aspirated (NA) spark ignition (SI) engines for control purposes is the Mean Value Engine Model (MVEM). Such models have a time resolution which is just sufficient to capture the main details of the dynamic performance of NA SI engines but not ...

  18. Eliminating air pollution from petrol engines

    Energy Technology Data Exchange (ETDEWEB)

    Gujral, I.S.; Dave, R.K.; Shende, S.; Saxena, L.M.

    1976-03-01

    A review is given of various methods of controlling nitrogen oxides emissions from automobile spark ignition engines. Methods discussed include exhaust gas recirculation, catalytic conversion, afterburning, burning of non-stoichiometric mixtures, and water injection. It is concluded that the combined use of a catalytic converter and an afterburner is the most feasible option for meeting pollution standards. (PMA)

  19. The new General Motors diesel engine management system; Die neue Dieselmotor-Steuerung von General Motors

    Energy Technology Data Exchange (ETDEWEB)

    Graglia, Riccardo; Catanese, Alessandro; Parisi, Filippo; Barbero, Simone [General Motors Powertrain Europe S.r.L., Turin (Italy)

    2011-02-15

    For more than ten years, General Motors has been developing ECUs for spark-ignition engines in-house. The company has now also developed an engine management system for diesel engines that offers such features as closed-loop injector control and integrated glow plug electronics. (orig.)

  20. MODELLING OF NON-ROAD TRANSIENT CYCLE

    Directory of Open Access Journals (Sweden)

    Martin Kotus

    2013-12-01

    Full Text Available The paper describes the modeling of NRTC (Non-Road Transient Cycle test procedure based on previously measured characteristics of fuel consumption, carbon monoxide (CO, carbon dioxide (CO2, hydrocarbons (HC, nitrogen oxides (NOx and particulates (PM production. It makes possible to compare the current technical condition of an internal combustion engine of an agricultural tractor with its previous state or other tractor’s engine. Based on measured characteristics, it is also possible to model any other cycle without further measurements (NRSC test procedure, cycle for specific conditions – mountain tractor, etc.. The result may thus contribute to improving the environment by reducing the production of harmful substances emitted into the air and save money due to reduced fuel consumption.

  1. 40 CFR 91.113 - Requirement of certification-emission control information label and engine identification number.

    Science.gov (United States)

    2010-07-01

    ... MARINE SPARK-IGNITION ENGINES Emission Standards and Certification Provisions § 91.113 Requirement of... during engine life; (4) Be written in English; and (5) Be located so as to be readily visible to the average person after the engine is installed in the marine vessel. (b) If the marine vessel obscures...

  2. 40 CFR 1045.660 - How do I certify outboard or personal watercraft engines for use in jet boats?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I certify outboard or personal watercraft engines for use in jet boats? 1045.660 Section 1045.660 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS...

  3. Direct comparasion of an engine working under Otto, Miller end Diesel cycles : thermodynamic analysis and real engine performance

    OpenAIRE

    Ribeiro, Bernardo Sousa; Martins, Jorge

    2007-01-01

    One of the ways to improve thermodynamic efficiency of Spark Ignition engines is by the optimisation of valve timing and lift and compression ratio. The throttleless engine and the Miller cycle engine are proven concepts for efficiency improvements of such engines. This paper reports on an engine with variable valve timing (VVT) and variable compression ratio (VCR) in order to fulfill such an enhancement of efficiency. Engine load is controlled by the valve opening per...

  4. CFD analysis of the scavenging process in marine two-stroke diesel engines

    DEFF Research Database (Denmark)

    Andersen, Fredrik Herland; Hult, Johan; Nogenmyr, Karl-Johan

    2014-01-01

    The scavenging process is an integral part of any two-stroke internal combustion engine regardless of being spark ignited (SI) or compression ignited (CI). The scavenging process is responsible for replacing the burned gas from the combustion process from the previous working stroke with fresh ai...

  5. Internal combustion engines a detailed introduction to the thermodynamics of spark and compression ignition engines, their design and development

    CERN Document Server

    Benson, Rowland S

    1979-01-01

    Internal Combustion of Engines: A Detailed Introduction to the Thermodynamics of Spark and Compression Ignition Engines, Their Design and Development focuses on the design, development, and operations of spark and compression ignition engines. The book first describes internal combustion engines, including rotary, compression, and indirect or spark ignition engines. The publication then discusses basic thermodynamics and gas dynamics. Topics include first and second laws of thermodynamics; internal energy and enthalpy diagrams; gas mixtures and homocentric flow; and state equation. The text ta

  6. Engine Torque Control of SI Engine using Linear Quadratic Integral Tracking (LQIT Optimal Control

    Directory of Open Access Journals (Sweden)

    Aris Triwiyatno

    2011-11-01

    Full Text Available Due to the needs of improving fuel economy and reducing emissions, it is increasingly important to achieve control over robustness behavior and meet performance objectives over the life of the vehicle. This requires the development of high performance and optimal power train controllers. The performance objectives are often conflicting, or at least interrelated. One way to potentially meet these performance requirements is to introduce a method of controlling engine torque of Spark Ignition (SI engine using Linear Quadratic Integral Tracking (LQIT optimal control. The goal is to develop simple algorithms which can control engine torque well, thus providing fuel control more efficient and simultaneously improving engine performance due to the needs of the driver based on throttle opening information. In this case, spark ignition engine with automatic transmission simulation model is used to meet a good performance under this controller design.

  7. Effect of Modified Design on Engine Fuel Efficiency

    OpenAIRE

    Abdul Siddique Sk; Nataraj T S C

    2016-01-01

    This paper covers key and representative developments in the area of high efficiency and cleans internal combustion engines. The main objective is to highlight recent efforts to improve (IC) engine fuel efficiency and combustion. Rising fuel prices and stringent emission mandates have demanded cleaner combustion and increased fuel efficiency from the IC engine. This need for increased efficiency has placed compression ignition (CI) engines in the forefront compared to spark ignition (SI) engi...

  8. Fuel economy screening study of advanced automotive gas turbine engines

    Science.gov (United States)

    Klann, J. L.

    1980-01-01

    Fuel economy potentials were calculated and compared among ten turbomachinery configurations. All gas turbine engines were evaluated with a continuously variable transmission in a 1978 compact car. A reference fuel economy was calculated for the car with its conventional spark ignition piston engine and three speed automatic transmission. Two promising engine/transmission combinations, using gasoline, had 55 to 60 percent gains over the reference fuel economy. Fuel economy sensitivities to engine design parameter changes were also calculated for these two combinations.

  9. Natural gas in a D. I. diesel engine. A comparison of two different ways. [Direct injection diesel enginer

    Energy Technology Data Exchange (ETDEWEB)

    Jun-ming, Qu; Sorenson, S.C.; Kofoed, E.

    1987-01-01

    A D.I. diesel engine was modified for natural gas operation with pilot injection and with spark ignition so that a comparative analysis of these two different ways of using natural gas could be made. The results of the experiments indicate that for a diesel engine, it is possible that the operating characteristics of a straight natural gas engine are comparable with those of a diesel/gas engine at the same compression ratio and speed. For a dual fuel engine with pilot injection the best diesel/gas ratio by energy content is approximately 20/80 at full load operation. For straight natural gas engine with spark ignition, quality governed natural gas operation has good efficiency but poor NOx emissions. This problem could be improved through throttle controlled operation. These two different ways of using natural gas are best suited to stationary engines.

  10. 40 CFR 90.405 - Recorded information.

    Science.gov (United States)

    2010-07-01

    ... measurement is a volume measurement system, record the fuel temperature in the measurement system for fuel...) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Gaseous Exhaust Test..., where applicable. (b) Test data; general. (1) Engine identification number. (2) Engine emission...

  11. A Technical Review of Compressed Natural Gas as an Alternative Fuel for Internal Combustion Engines

    OpenAIRE

    Semin; Rosli A. Bakar

    2008-01-01

    Natural gas is promising alternative fuel to meet strict engine emission regulations in many countries. Compressed natural gas (CNG) has long been used in stationary engines, but the application of CNG as a transport engines fuel has been considerably advanced over the last decade by the development of lightweight high-pressure storage cylinders. Engine conversion technology is well established and suitable conversion equipment is readily available. For spark ignition engines there are two op...

  12. Concepts to meet non-road stage IV / Tier 4 emission legislation; Konzepte fuer die Emissionsgesetzgebung. Non-Road Stage IV / Tier 4

    Energy Technology Data Exchange (ETDEWEB)

    Cartus, T.; Herrmuth, H.; Stein, G. [AVL List GmbH, Graz (Austria); Scherm, P. [Euromot - European Association of Internal Combustion Engine Mfrs., Frankfurt am Main (Germany)

    2007-12-15

    By December 2007, the EC will have to submit a new proposal for Stage IV emissions limits for Non-Road Mobile Machinery. Industry is committed to contributing to this process and has asked AVL to carry out a study as a neutral engineering company. The main topics of this study are described in this article. (orig.)

  13. Potential for energy savings in old and new auto engines

    Science.gov (United States)

    Reitz, John R.

    1985-11-01

    This paper disucsses the potential for energy savings in the transportation sector through the use of both improved and entirely new automotive engines. Although spark-ignition and diesel internal combustion engines will remain the dominant choices for passenger-car use throughout the rest of this century, improved versions of these engines (lean-burn, low-friction spark-ignition and adiabatic, low-friction diesel engines) could, in the long term, provide a 20-30 percent improvement in fuel economy over what is currently available. The use of new materials, and modifications to both vehicle structure and vehicle transmissions may yield further improvements. Over a longer time frame, the introduction of the high-temperature gas-turbine engine and the use of new synfuels may provide further opportunities for energy conservation.

  14. 40 CFR 90.202 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Certification Averaging, Banking, and... between engine families within a given manufacturer's product line. Banking means the retention of... revoked if EPA review of the end-of-year reports or any subsequent audit action(s) reveals problems...

  15. 40 CFR 90.205 - Banking.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Banking. 90.205 Section 90.205... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Certification Averaging, Banking, and Trading Provisions § 90.205 Banking. (a)(1) Beginning August 1, 2007, a manufacturer of a Class I engine...

  16. 76 FR 80253 - Approval and Promulgation of Implementation Plans and Designation of Areas for Air Quality...

    Science.gov (United States)

    2011-12-23

    ... increase their emissions by purchasing emission credits. Response 2b. Contrary to the Commenter's statement... gasoline and diesel highway vehicle standards, nonroad spark-ignition engines and recreational engines... purchasing credits at a price equivalent to that capital already spent. In short, any utility in a state...

  17. 40 CFR 1054.730 - What ABT reports must I send to EPA?

    Science.gov (United States)

    2010-07-01

    ... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Averaging, Banking, and Trading for Certification § 1054.730 What ABT reports must I send to EPA? (a) If any...-data engine or the appropriate internal surface area of the fuel tank. (6) Useful life. (7)...

  18. 40 CFR 1048.801 - What definitions apply to this part?

    Science.gov (United States)

    2010-07-01

    ... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Definitions and Other... other system, component, or technology mounted downstream of the exhaust valve (or exhaust port) whose... disabled are no longer constant-speed engines. Constant-speed operation has the meaning given in 40...

  19. 点火发动机碳氢排放的数值模拟%A Simulation for uHC Emissions in Spark Ignition Engines

    Institute of Scientific and Technical Information of China (English)

    邹云川; 陈国华; 蒋炎坤; 庄瑞宜

    2004-01-01

    为了弄清发动机气缸内未燃碳氢uHC的主要生成源和它们在废气排放中所占有的比例,有针对性地采取措施降低缸内uHC生成量,详细的分析了uHC排放生成机理;结合前人的研究成果,根据燃烧过程中所体现的物理学知识,建立了包括HC逃离正常燃烧、缸内氧化、缸内残留和排气管氧化等在内的一系列模型.通过此模型可非常清楚的了解发动机运行时缸内uHC的具体情况,并能定量分析各参数对HC排放的影响.

  20. Electrical assistance for S.I. engine idle speed control

    Energy Technology Data Exchange (ETDEWEB)

    Bidan, P.; Kouadio, I.K.; Valentin, M.; Montseny, G.

    1997-07-01

    An original method for improving spark-ignition engine idling conditions, is presented. The proposed solution has the distinctive feature of simultaneously combining the traditional airflow rate control and the usual automobile alternator operating as a synchronous motor in order to provide a fast supplementary torque. Experimental validation of the electric assistance system is carried out on a production engine, and the new method is compared with the standard one in terms of idle stability, fuel consumption and pollution emissions

  1. Hydrogen-air mixing evaluation in reciprocating engines

    Energy Technology Data Exchange (ETDEWEB)

    Dodge, L; Naegeli, D [Southwest Research Inst., San Antonio, TX (United States)

    1994-06-01

    This report presents the results of a computational study of fuel-air mixing in a hydrogen jet using a spark-ignited, hydrogen-fueled engine. The computational results were compared with experimental measurement being conducted at the Musashi Institute of Technology in Tokyo, Japan. The hydrogen-air mixing work was directed at understanding the extreme sensitivity of ignition to spark plug location and spark timing in direct-injected, hydrogen-fueled engines.

  2. Improving Efficiency, Extending the Maximum Load Limit and Characterizing the Control-related Problems Associated with Higher Loads in a 6-Cylinder Heavy-duty Natural gas Engine

    OpenAIRE

    Kaiadi, Mehrzad; Tunestål, Per; Johansson, Bengt

    2010-01-01

    High EGR rates combined with turbocharging has been identified as a promising way to increase the maximum load and efficiency of heavy duty spark ignition Natural Gas engines. With stoichiometric conditions a three way catalyst can be used which means that regulated emissions can be kept at very low levels. Most of the heavy duty NG engines are diesel engines which are converted for SI operation. These engine's components are in common with the diesel-engine which put limits on higher exh...

  3. Performance and Emission Studies of a SI Engine using Distilled Plastic Pyrolysis Oil-Petrol Blends

    OpenAIRE

    Kumar Kareddula Vijaya; Puli Ravi Kumar; Swarna Kumari A.; Shailesh P.

    2016-01-01

    In the present work, an experimental investigation is carried out to evaluate the use of plastic oil derived from waste plastic which used in a Spark Ignition engine. Experiments are conducted, the measured performance and emissions of plastic oil blends at different proportions are compared with the baseline operation of the SI engine running with gasoline fuel. Engine performance and exhaust gas emissions such as carbon monoxide, total unburned hydrocarbons, carbon dioxide and oxides of nit...

  4. Development of Kinetic Mechanisms for Next-Generation Fuels and CFD Simulation of Advanced Combustion Engines

    Energy Technology Data Exchange (ETDEWEB)

    Pitz, William J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McNenly, Matt J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whitesides, Russell [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mehl, Marco [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Killingsworth, Nick J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Westbrook, Charles K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-12-17

    Predictive chemical kinetic models are needed to represent next-generation fuel components and their mixtures with conventional gasoline and diesel fuels. These kinetic models will allow the prediction of the effect of alternative fuel blends in CFD simulations of advanced spark-ignition and compression-ignition engines. Enabled by kinetic models, CFD simulations can be used to optimize fuel formulations for advanced combustion engines so that maximum engine efficiency, fossil fuel displacement goals, and low pollutant emission goals can be achieved.

  5. Effects of ethanol on combustion and emissions of a gasoline engine operating with different combustion modes

    OpenAIRE

    Ojapah, MM; Zhao, H.; Zhang, Y.

    2016-01-01

    The introduction of fuel economy and CO2 emission legislations for passenger cars in many countries and regions has spurred the research and development of more efficient gasoline engines. The pumping loss at part-load operations is a major factor for the higher fuel consumption of spark ignition (SI) gasoline engines than the diesel engines. Various approaches have been identified to reduce the pumping loss at part-load operations, leading to improved fuel economy, including Early Intake Val...

  6. 40 CFR 90.412 - Data logging.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Data logging. 90.412 Section 90.412 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Gaseous Exhaust Test Procedures § 90.412 Data logging. (a) A computer...

  7. 40 CFR 90.5 - Acronyms and abbreviations.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Acronyms and abbreviations. 90.5...) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS General § 90.5 Acronyms and abbreviations. The following acronyms and abbreviations apply to part 90. AECD—Auxiliary emission...

  8. 40 CFR 90.7 - Reference materials.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Reference materials. 90.7 Section 90.7... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS General § 90.7 Reference materials... Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to...

  9. 40 CFR 90.1101 - Applicability.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Applicability. 90.1101 Section 90.1101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Warranty and Maintenance Instructions § 90.1101...

  10. 40 CFR 1054.706 - How do I generate and calculate evaporative emission credits?

    Science.gov (United States)

    2010-07-01

    ... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Averaging, Banking, and Trading for Certification § 1054.706 How do I generate and..., as described in paragraph (b) of this section. Total Area = The combined internal surface area of...

  11. 40 CFR 90.208 - Certification.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certification. 90.208 Section 90.208... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Certification Averaging, Banking, and Trading Provisions § 90.208 Certification. (a) In the application for certification a manufacturer...

  12. 40 CFR 90.108 - Certification.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certification. 90.108 Section 90.108... EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.108 Certification. (a) If, after a review of the manufacturer's submitted...

  13. Effect of Fuel Types on Combustion Characteristics and Performance of a Four Stroke IC Engine

    Directory of Open Access Journals (Sweden)

    Mrs. Rana Ali Hussein,

    2014-04-01

    Full Text Available In this study, the effect of Gasoline, Ethanol, Gasohol E10, and Kerosene on the performance and combustion characteristics of a spark ignition (SI engine were investigated. In the experiment, the internal combustion (IC engine includes one cylinder, two valves, and four stroke spark ignition. Performance tests were carried out for specific fuel consumption, brake specific fuel consumption, power developed, corrosion rate, and carbon dioxide (CO2 and carbon monoxide (CO emissions. The measurements were conducted under various engine speeds ranging from 1500 to 4500 rpm. The experimental results showed that the performance of engine was improved with the use of gasoline and gasohol E10 in comparison with the Ethanol and Kerosene. The concentrations of CO2 and CO were presented and compared for all type of fuel examined.

  14. Development and Test of a new Concept for Biomass Producer Gas Engines

    OpenAIRE

    Ahrenfeldt, Jesper; Foged, Esben Vendelbo; Strand, Rune; Henriksen, Ulrik Birk

    2010-01-01

    The technical requirements and the economical assessment of converting commercial diesel engine gen-sets into high compression spark ignition operation on biomass producer gas have been investigated. Assessments showed that for a 200 kWe gen-set there would be a financial benefit of approximately 600.000 DKK corresponding to a reduction of 60% in investment costs compared to the price of a conventional gas engine gen-set. Experimental investigations have been conducted on two identical small ...

  15. Indicated mean effective pressure oscillations in a natural gas combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Litak, Grzegorz [Dept. of Applied Mechanics, Lublin Univ. of Tech., Lublin (Poland); Dipt. di Architettura, Costruzioni e Strutture, Univ. Politecnica delle Marche, Ancona (Italy); Geca, Michal [Dept. of Applied Mechanics, Lublin Univ. of Tech., Lublin (Poland); Dept. of Thermodynamics, Fluid Mechanics and Aircraft Propulsion, Lublin Univ. of Tech., Lublin (Poland); Yao Bao-Feng; Li Guo-Xiu [School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong Univ., BJ (China)

    2009-05-15

    Fluctuations in a combustion process of natural gas in the internal spark ignition engine have been investigated. We measured pressure of the cyclic combustion and expressed its cyclic oscillations in terms of indicated mean effective pressure per cycle. By applying the statistical and multifractal analysis to the corresponding time series we show the considerable changes in engine dynamics for a different equivalence ratio decreases from 0.781 to very lean conditions. (orig.)

  16. Statistical Engine Knock Control

    DEFF Research Database (Denmark)

    Stotsky, Alexander A.

    2008-01-01

    A new statistical concept of the knock control of a spark ignition automotive engine is proposed . The control aim is associated with the statistical hy pothesis test which compares the threshold value to the average value of the max imal amplitud e of the knock sensor signal at a given freq uency....... C ontrol algorithm which is used for minimization of the regulation error realizes a simple count-up-count-d own logic. A new ad aptation algorithm for the knock d etection threshold is also d eveloped . C onfi d ence interval method is used as the b asis for ad aptation. A simple statistical mod el...

  17. Evaluation of heat engine for hybrid vehicle application

    Science.gov (United States)

    Schneider, H. W.

    1984-01-01

    The status of ongoing heat-engine developments, including spark-ignition, compression-ignition, internal-combustion, and external-combustion engines is presented. The potential of engine concepts under consideration for hybrid vehicle use is evaluated, using self-imposed criteria for selection. The deficiencies of the engines currently being evaluated in hybrid vehicles are discussed. Focus is on recent research with two-stroke, rotary, and free-piston engines. It is concluded that these engine concepts have the most promising potential for future application in hybrid vehicles. Recommendations are made for analysis and experimentation to evaluate stop-start and transient emission behavior of recommended engine concepts.

  18. Hydrogen engine development: Experimental program

    Energy Technology Data Exchange (ETDEWEB)

    Van Blarigan, P. [Sandia National Lab., Livermore, CA (United States)

    1996-10-01

    In the continuing development of a hydrogen fueled IC engine optimized for application to a generator set or hybrid vehicle, experiments were performed at Sandia National Laboratories on two engine configurations. The intent is to maximize thermal efficiency while complying with strict emissions standards. The initial investigation was conducted utilizing a spark ignited 0.491 liter single cylinder Onan engine and has progressed to a spark ignited 0.850 liter modified for single cylinder operation Perkins engine. Both combustion chamber geometries were {open_quotes}pancake{close_quotes} shaped and achieved a compression ratio of 14:1. The engines were operated under premixed conditions. The results demonstrate that both engines can comply with the California Air Resources Board`s proposed Equivalent Zero Emission Vehicle standards for NO{sub x} during operation at an equivalence ratio of 0.4. The Onan engine achieved an indicated thermal efficiency of 43% at 1800 RPM, as determined by integration of the pressure-volume relationships. Initial experiments with the larger displacement Perkins engine have realized a gain, relative to the Onan engine, in indicated thermal efficiency of 2% at 1800 RPM, and 15% at 1200 RPM.

  19. 40 CFR 90.118 - Certification procedure-service accumulation and usage of deterioration factors.

    Science.gov (United States)

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION... recommended lubrication and filter changes, may be performed during service accumulation without...

  20. Performance, emission and combustion characteristics of a branched higher mass, C3 alcohol (isopropanol blends fuelled medium duty MPFI SI engine

    Directory of Open Access Journals (Sweden)

    Harish Sivasubramanian

    2017-04-01

    Full Text Available With growing concerns about environmental pollution caused by automobiles, biofuels containing oxygen – also known as oxygenates – are being researched very rigorously. In this article, we have inspected the use of isopropanol/gasoline blends, as fuel in a 4 – cylinder Spark Ignition engine with Multi-Point Fuel Injection System. Isopropanol was mixed with Unleaded Gasoline in proportions of 10, 20 and 30% by volume (IPA10, IPA20 and IPA30. It is found that with the use of isopropanol/gasoline blends in Spark Ignition Engine, Brake Thermal Efficiency and NOx emissions increased whereas carbon monoxide and hydrocarbon emissions decreased. When the spark timing was retarded by 2 degrees, it was found that isopropanol/gasoline blends emitted lower NOx emissions than those at original spark timing. Isopropanol blends also increased the in-cylinder pressure values and heat release rate values.

  1. Advanced nonlinear engine speed control systems

    DEFF Research Database (Denmark)

    Vesterholm, Thomas; Hendricks, Elbert

    1994-01-01

    : accurately tracking of a desired engine speed in the presence of model uncertainties and severe load disturbances. This is accomplished by using advanced nonlinear control techniques such as input/output-linearization and sliding mode control. These techniques take advantage of a nonlinear model......Several subsidiary control problems have turned out to be important for improving driveability and fuel consumption in modern spark ignition (SI) engine cars. Among these are idle speed control and cruise control. In this paper the idle speed and cruise control problems will be treated as one...

  2. High saving potentials and functional enhancements. Diesel-electric hybrid drives in mobile engines; Hohe Einsparpotenziale und funktionale Erweiterungen. Dieselelektrische Hybridantriebe in mobilen Arbeitsmaschinen

    Energy Technology Data Exchange (ETDEWEB)

    Dietel, Harald [Sensor-Technik Wiedemann (STW), Kaufbeuren (Germany); Kuhn, Michael; Hemscheidt, Michael [Kaessbohrer, Laupheim (Germany)

    2009-07-01

    With increasing environmental awareness as well as rising fuel prices, the issue of energy efficiency has come into the focus of public interest. Hybrid drives are an interesting option, usually in the form of passenger cars with a spark ignition engine and (at least) one electric motor in a single powertrain involving significant saving potentials and energy resources. Electrification of vehicles offers furtheron possibilities, which conventional systems can't arrive. (orig./GL)

  3. An overview of non-road equipment emissions in China

    Science.gov (United States)

    Wang, Fan; Li, Zhen; Zhang, Kaishan; Di, Baofeng; Hu, Baomei

    2016-05-01

    As the vehicle population has dramatically increased in China in the past two decades, vehicle emissions have become one of the major sources to air pollution across the entire country, especially for the metropolitan cities such as Beijing and Shanghai. Most of the non-road equipment are diesel-fueled and have been proved to be a key source for NOx and PM emissions, contributing significantly to the formation of haze/smog. Therefore, an accurate estimation of emission inventory from non-road equipment is essential for air quality improvement policy making, which mainly depends on the data availability of equipment population, activity, and emissions factor. Compared to on-road vehicles, less studies regarding emissions characterization have been conducted and investigated for non-road mobile sources in China. Thus, in order to identify the data gaps and future research needs, the objective of this study is to review the current status of research in non-road mobile emissions. Five types of non-road equipment were addressed in this study, including agricultural equipment, industrial equipment, river/ocean-going vessels, locomotives, and commercial airplanes, with a focus on the former two. The equipment are further classified mainly based on national standards and data availability to account for fuel type, job duties and others. This investigation has found that the research regarding emissions from non-road equipment is still at its early stage and there is a huge data gap for both activity and emissions factors. For most of the study, data used for emission inventory estimation were based on either literature with similar equipment or as-developed emissions models such as NONROAD or CORPERT. The representativeness of these data to the localities was not much discussed in those studies, which might have weakened the accuracy of the estimated emission inventory. For future study, real-world in-use measurements of activities and emissions for the non-road equipment

  4. An overview of NASA research on positive displacement type general aviation engines

    Science.gov (United States)

    Kempke, E. E.; Willis, E. A.

    1979-01-01

    The paper surveys the current status of the aviation positive displacement engine programs underway at the NASA Lewis Research Center. The program encompasses conventional, lightweight diesel, and rotary combustion engines. Attention is given to topics such as current production type engine improvement, cooling drag reduction, fuel injection, and experimental and theoretical combustion studies. It is shown that the program's two major technical thrusts are directed toward lean operation of current production type spark ignition engines and advanced alternative engine concepts. Finally, an Otto cycle computer model is also covered.

  5. Diesel and gas engines: evolution following new regulations; Moteurs diesel et gaz: evolution face aux nouvelles reglementations

    Energy Technology Data Exchange (ETDEWEB)

    Deverat, Ph. [Bergerat Monnoyeur (France). Direction Industrie

    1997-12-31

    Engine emissions of CO, NMHC and ashes are easily lowered through a low-cost exhaust gas processing, while NOx processing in fumes is rather complex and environmentally hazardous; thus, engine manufacturers have emphasized their researches for NOx decrease on the engine design: lower combustion temperature in diesel engines through water cooling or air/air exchanger, lean mixture with excess air (open chamber or pre-chamber) in spark ignition gas engines. Examples of modifications in Caterpillar engines are given. Exhaust gas processing for CO, NMHC, NOx (3 way catalytic purifier, selective catalytic reduction) and ashes is also discussed

  6. A simple strategy to establish preliminary engine cylinder geometry for optimum combustion

    Energy Technology Data Exchange (ETDEWEB)

    Harish Kumar, R. [Sri Siddhartha Inst. of Technology, Karnataka (India); Antony, A.J. [Sahyadri Inst. of Technology, Mangalore, Karnataka (India)

    2009-07-01

    The design of modern spark ignition engines presents a challenge for automotive engineers in terms of striking the right combination of engine operating parameters and geometry. Most modern spark ignition engines have a compression ratio in the range 8 to 11 and the engine geometry is dictated by the choice of the bore/stroke (B/Ls) ratio in addition to various other design considerations such as the location and size of valves and location of spark plugs. Small engines generally have a B/Ls ratio ranging from 0.7 to 1.3 while large stationary engines have a ratio of less than 0.7. For a given displacement volume, a longer stroke allows for smaller bore which results in less surface area in the combustion chamber with a correspondingly smaller heat loss, which increases thermal efficiency within the combustion chamber. However the longer stroke results in higher piston speed and higher friction losses which reduces the brake power output of the engine. If the stroke is shortened, the bore must be increased which reduces the friction losses but increases the heat transfer losses. This paper presented a simple thermodynamics approach based on one dimensional thermodynamic model of the combustion chamber to establish the appropriate B/Ls ratio depending on the operating conditions of the engine such as its compression ratio, speed, and fuel equivalence ratios, in conjunction with a nearly full fledged simulation program for optimum combustion in spark ignition engines. The paper described the engine test rig as well as the experimental procedure. The development of the mathematical model was also explained. It was concluded that there is a significant relationship between the compression ratio of the engine and the B/Ls ratio. These valves must match for optimum combustion and optimum specific power output. 10 refs., 1 tab., 5 figs.

  7. Analysis of experimental hydrogen engine data and hydrogen vehicle performance and emissions simulation

    Energy Technology Data Exchange (ETDEWEB)

    Aceves, S.A. [Lawrence Livermore National Lab., CA (United States)

    1996-10-01

    This paper reports the engine and vehicle simulation and analysis done at Lawrence Livermore (LLNL) as a part of a joint optimized hydrogen engine development effort. Project participants are: Sandia National Laboratory; Los Alamos National Laboratory; and the University of Miami. Fuel cells are considered as the ideal power source for future vehicles, due to their high efficiency and low emissions. However, extensive use of fuel cells in light-duty vehicles is likely to be years away, due to their high manufacturing cost. Hydrogen-fueled, spark-ignited, homogeneous-charge engines offer a near-term alternative to fuel cells. Hydrogen in a spark-ignited engine can be burned at very low equivalence ratios. NO{sub x} emissions can be reduced to less than 10 ppm without catalyst. HC and CO emissions may result from oxidation of engine oil, but by proper design are negligible (a few ppm). Lean operation also results in increased indicated efficiency due to the thermodynamic properties of the gaseous mixture contained in the cylinder. The high effective octane number of hydrogen allows the use of a high compression ratio, further increasing engine efficiency. In this paper, a simplified engine model is used for predicting hydrogen engine efficiency and emissions. The model uses basic thermodynamic equations for the compression and expansion processes, along with an empirical correlation for heat transfer, to predict engine indicated efficiency. A friction correlation and a supercharger/turbocharger model are then used to calculate brake thermal efficiency. The model is validated with many experimental points obtained in a recent evaluation of a hydrogen research engine. The experimental data are used to adjust the empirical constants in the heat release rate and heat transfer correlation. The results indicate that hydrogen lean-burn spark-ignite engines can provide Equivalent Zero Emission Vehicle (EZEV) levels in either a series hybrid or a conventional automobile.

  8. Combustion characteristics of an SI engine fueled with biogas fuel

    Science.gov (United States)

    Chen, Lei; Long, Wuqiang; Song, Peng

    2017-04-01

    An experimental research of the effect of H2 substitution and CO2 dilution on CH4 combustion has been carried out on a spark ignition engine. The results show that H2 addition could improve BMEP, thermal efficiency, CO and THC emissions. NOX emissions increased for higher low heating value (LHV) of H2 than CH4. CO2 dilution could effective reduce NOX emission of H2-CH4 combustion. Although engine performance, thermal efficiency and exhaust get unacceptable under high fuel dilution ratio (F.D.R.) conditions, it could be solved by decreasing F.D.R. and/or increasing hydrogen substitution ratio (H.S.R.).

  9. From heating sytems producer to engine experts. Gorleben: Dreyer und Bosse Kraftwerke GmbH becomes a specialist in ignition jet aggregates; Vom Heizungsbauer zum Motorexperten. In Gorleben entwickelt sich die Dreyer and Bosse Kraftwerke GmbH zum Spezialisten fuer Zuendstrahl-Aggregate

    Energy Technology Data Exchange (ETDEWEB)

    Hinsch, C.

    2001-07-01

    Peter Bosse and his team have been providers of cogeneration systems for biogas plants since 1999. Their range of systems today covers 70-kW ignition jet aggregates up to 625 kW spark ignition engines. [German] Seit 1999 baut Peter Bosse mit seinem Team in dem Wendland-Dorf Blockheizkraftwerke (BHKW) fuer Biogasanlagen, das Angebot reicht heute von 70-Kilowatt-Zuendstrahl-Aggregat bis zum 625-kW-Ottomotor. (orig.)

  10. Test/QA plan for the verification testing of alternative or reformulated liquid fuels, fuel additives, fuel emulsions, and lubricants for highway and nonroad use heavy-duty diesel engines

    Science.gov (United States)

    This Environmental Technology Verification Program test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR P...

  11. 75 FR 8056 - California State Nonroad Engine Pollution Control Standards; California New Nonroad Compression...

    Science.gov (United States)

    2010-02-23

    ... Air Act Section 209 Proceedings In Motor and Equip. Mfrs. Assoc. v. EPA, 627 F.2d 1095 (D.C. Cir. 1979... * * *.\\16\\ \\16\\ Motor and Equip. Mfrs. Assoc. v. EPA (MEMA I), 627 F.2d 1095, 1122 (D.C. Cir. 1979). The...

  12. Numerical Investigation of the Scavenging Process in Marine Two-Stroke Diesel Engines

    DEFF Research Database (Denmark)

    Andersen, Fredrik Herland; Hult, Johan; Nogenmyr, Karl-Johan

    2013-01-01

    direction which gives the method its name. In this study a CFD analysis of the scavenging process in the 4T50ME-X test engine at MAN Diesel & Turbo is presented. The CFD model uses the full engine geometry including a moving piston and valve combined with time resolved measurement data as boundary......The scavenging process is an integral part of any two-stroke internal combustion engine cycle whether it is spark ignited or compression ignited. The scavenging process is responsible for transporting the burned gases from the previous working stroke out of the combustion chamber to allow...

  13. Time Resolved FTIR Analysis of Combustion of Ethanol and Gasoline Combustion in AN Internal Combustion Engine

    Science.gov (United States)

    White, Allen R.; Sakai, Stephen; Devasher, Rebecca B.

    2011-06-01

    In order to pursue In Situ measurements in an internal combustion engine, a MegaTech Mark III transparent spark ignition engine was modified with a sapphire combustion chamber. This modification will allow the transmission of infrared radiation for time-resolved spectroscopic measurements by an infrared spectrometer. By using a Step-scan equipped Fourier transform spectrometer, temporally resolved infrared spectral data were acquired and compared for combustion in the modified Mark III engine. Measurements performed with the FTIR system provide insight into the energy transfer vectors that precede combustion and also provides an in situ measurement of the progress of combustion. Measurements were performed using ethanol and gasoline.

  14. Railplug Ignition System for Enhanced Engine Performance and Reduced Maintenance

    Energy Technology Data Exchange (ETDEWEB)

    DK Ezekoye; Matt Hall; Ron Matthews

    2005-08-01

    This Final Technical Report discusses the progress that was made on the experimental and numerical tasks over the duration of this project. The primary objectives of the project were to (1) develop an improved understanding of the spark ignition process, and (2) develop the railplug as an improved ignitor for large bore stationary natural gas engines. We performed fundamental experiments on the physical processes occurring during spark ignition and used the results from these experiments to aid our development of the most complete model of the spark ignition process ever devised. The elements in this model include (1) the dynamic response of the ignition circuit, (2) a chemical kinetics mechanism that is suitable for the reactions that occur in the plasma, (3) conventional flame propagation kinetics, and (4) a multi-dimensional formulation so that bulk flow through the spark gap can be incorporated. This model (i.e., a Fortran code that can be used as a subroutine within an engine modeling code such as KIVA) can be obtained from Prof. Ron Matthews at rdmatt{at}mail.utexas.edu or Prof. DK Ezekoye at dezekoye{at}mail.utexas.edu. Fundamental experiments, engine experiments, and modeling tasks were used to help develop the railplug as a new ignitor for large bore natural gas engines. As the result of these studies, we developed a railplug that could extend the Lean Stability Limit (LSL) of an engine operating at full load on natural gas from {phi} = 0.59 for operation on spark plugs down to {phi} = 0.53 using railplugs with the same delivered energy (0.7 J). However, this delivered energy would rapidly wear out the spark plug. For a conventional delivered energy (<0.05 J), the LSL is {phi} = 0.63 for a spark plug. Further, using a permanent magnet to aid the plasma movement, the LSL was extended to {phi} = 0.54 for a railplug with a delivered energy of only 0.15 J/shot, a typical discharge energy for commercial capacitive discharge ignition systems. Here, it should be

  15. Downsizing assessment of automotive Stirling engines

    Science.gov (United States)

    Knoll, R. H.; Tew, R. C., Jr.; Klann, J. L.

    1983-01-01

    A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period.

  16. Floating-point coprocessor for fault detection and isolation in electronically controlled internal combustion engines. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Yu, T.L.; Ribbens, W.B.

    1991-09-01

    The report details the design of a floating-point coprocessor intended for real-time fault detection in electronically controlled internal combustion engines. The fault detection strategies are based on dynamic models of various engine subsystems and require the use of state estimators. The coprocessor can be operated at a clock rate of 24 MHz, and is capable of operating up to sixteen state estimators in real time. The design is suitable for application to internal combustion engines used for vehicle propulsion or power generation, whether diesel or spark ignited.

  17. Three-Dimensional Models for Analyzing the Cyclic Variations in a Lean Burn CNG Engine

    Institute of Scientific and Technical Information of China (English)

    LI Guo-xiu; YU Yu-song; LIU Jian-ying

    2007-01-01

    Three-dimensional models, consisting of the flame kernel formation model, flame kernel development model and natural gas single step reaction model, are used to analyze the contribution of cyclic equivalence ratio variations to cyclic variations in the compressed natural gas (CNG) lean burn spark ignition engine. Computational results including the contributions of equivalence ratio cyclic variations to each combustion stage and effects of engine speed to the extent of combustion variations are discussed. It is concluded that the equivalence ratio variations affect mostly the main stage of combustion and hardly influence initial kernel development stage.

  18. AN INTRODUCTION TO A HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE

    Directory of Open Access Journals (Sweden)

    A.A. Hairuddin

    2014-12-01

    Full Text Available Homogeneous charge compression ignition (HCCI engine technology is relatively new and has not matured sufficiently to be commercialised compared with conventional engines. It can use spark ignition or compression ignition engine configurations, capitalizing on the advantages of both: high engine efficiency with low emissions levels. HCCI engines can use a wide range of fuels with low emissions levels. Due to these advantages, HCCI engines are suitable for use in a hybrid engine configuration, where they can reduce the fuel consumption even further. However, HCCI engines have some disadvantages, such as knocking and a low to medium operating load range, which need to be resolved before the engine can be commercialised. Therefore, a comprehensive study has to be performed to understand the behaviour of HCCI engines.

  19. Optical investigations of combustion process in SI and CI engines fuelled with butanol blends

    Energy Technology Data Exchange (ETDEWEB)

    Marchitto, L.; Mazzei, A.; Merola, S.S.; Tornatore, C. [CNR Napoli, Naples (Italy). Istituto Motori; Valentino, G.

    2013-06-01

    The use of alternative fuels, as biodiesel and ethanol, for light duty engines to approach the target of low exhaust emissions without fuel economy and performance penalty has been widely investigated. Recently it is growing the interest in the butanol and bio-butanol as viable alternatives either single or blended with conventional based fuels. In this paper, butanol effects on combustion processes were investigated through conventional methods and optical diagnostics applied in the combustion chamber of a compression ignition engine and of a spark ignition engine. Blends of diesel and n-butanol were used in a common rail DI diesel engine running at different operating conditions. Fuel injection timing and oxygen at the intake were changed in a single cylinder compression ignition engine equipped with common rail multi-jets injection system. Spray combustion and pollutant formation were investigated though UV-visible digital imaging and natural emission spectroscopy. Flame emissions and spectroscopy were applied in an optically accessible cylinder of a port fuel-injection, spark-ignition engine with an external boosting device. The engine worked with a stoichiometric mixture at medium speed and boosting in wide open throttle condition. Normal and knocking combustion was tested. Experiments in both the engines demonstrated that butanol allowed to reduce carbonaceous compounds formation and soot emission and to decrease unpleasant effects related to the combustion process such as the fuel deposition burning. Moreover some emission bands of OH radicals could be used as feature of different phenomena related to the combustion process. (orig.)

  20. SIMULATIVE EXPERIMENTS ON IMPROVING COMBUSTION CHAMBER IN SPARK IGNITED BIOGAS ENGINE%火花点火沼气机燃烧室改进的模拟实验研究

    Institute of Scientific and Technical Information of China (English)

    陈泽智; 金萍; 陈勇

    1999-01-01

    采用快速压缩膨胀机对2135型火花点火沼气发动机的燃烧室进行了模拟研究,结果表明:所模拟的燃烧过程存在着急燃期中压力升高率较低、后燃比较严重的情况;通过采取增大压缩比、采用湍流型燃烧室的措施,可改善发动机的燃烧过程.将以上结果应用在2135型火花点火沼气发动机上,取得了很好的效果,从而证实了模拟实验研究的正确性.

  1. Effects of Spark Ignition on HCCI Combustion in Gasoline Direct-Injection Engines%火花点火对缸内直喷汽油机HCCI燃烧的影响

    Institute of Scientific and Technical Information of China (English)

    王志; 王建昕; 帅石金; 马青峻

    2005-01-01

    实现汽油机均质混合气压燃(HCCI)的难点是着火控制.在缸内直喷汽油机上实现了HCCI燃烧,研究了火花点火对HCCI燃烧特性的影响.结果表明,HCCI燃烧方式较火花点火(SI)火焰传播燃烧方式放热速率快,热效率高,NOx大幅度降低.在HCCI临界状态时,火花点火有助于提高燃烧稳定性,抑制失火和爆燃,降低循环波动;当火花点火时缸内温度远超过临界着火温度时,火花点火对HCCI燃烧影响不大.火花点火在SI/HCCI燃烧模式切换工况时,能提高瞬态过渡平顺性.

  2. Application of the optical flow method for the experimental analysis of turbulent flame propagation in a transparent engine

    Science.gov (United States)

    Barone, Mario; Lombardi, Simone; Continillo, Gaetano; Sementa, Paolo; Vaglieco, Bianca Maria

    2016-12-01

    This paper illustrates the analysis conducted on high-definition, high sampling rate image sequences collected in experiments with a single spark ignition optically accessible engine. Images are first processed to identify the reaction front, and then analyzed by an optical flow estimation technique. The results show that each velocity component of the estimated flow field has an ECDF very similar to the CDF of a Gaussian distribution, whereas the velocity magnitude has an ECDF well fitted by a Rayleigh probability distribution. The proposed non-intrusive method provides a fast statistical characterization of the flame propagation phenomenon in the engine combustion chamber.

  3. Analysis of combustion anomalies in supercharged DI gasoline engines; Analyse von Verbrennungsanomalien bei hoch aufgeladenen Ottomotoren mit Direkteinspritzung

    Energy Technology Data Exchange (ETDEWEB)

    Michels, Karsten; Birkigt, Andreas; Theobald, Joerg [Volkswagen AG, Wolfsburg (Germany); Mauss, Fabian [Technische Univ. Cottbus (Germany). Lehrstuhl fuer Thermodynamik und Thermische Verfahrenstechnik; Benz, Christof; Crusius, Johann-Philipp; Nocke, Juergen; Hassel, Egon [Rostock Univ. (Germany). Lehrstuhl fuer Technische Thermodynamik

    2010-07-01

    The reduction of displacement in relation with air charging and direct injection is an effective method to reduce fuel consumption. Though sporadic, unwanted self ignition, so called pre ignition can occur when extremely rising the IMEP in the lower range of speed. This paper describes the facets of pre ignition using results of engine experiments and compares the characteristics with abnormal combustion of knocking and surface ignition. There is a classification of pre ignition into the entirety of abnormal combustion in spark ignition engines on this basis. Different release mechanisms of pre ignition on the possible potential of self ignition have been analysed using homogeneous reaction calculation. (orig.)

  4. Optical Study of Flow and Combustion in an HCCI Engine with Negative Valve Overlap

    Science.gov (United States)

    Wilson, Trevor S.; Xu, Hongming; Richardson, Steve; Wyszynski, Miroslaw L.; Megaritis, Thanos

    2006-07-01

    One of the most widely used methods to enable Homogeneous Charge Compression Ignition (HCCI) combustion is using negative valve overlapping to trap a sufficient quantity of hot residual gas. The characteristics of air motion with specially designed valve events having reduced valve lift and durations associated with HCCI engines and their effect on subsequent combustion are not yet fully understood. In addition, the ignition process and combustion development in such engines are very different from those in conventional spark-ignition or diesel compression ignition engines. Very little data has been reported concerning optical diagnostics of the flow and combustion in the engine using negative valve overlapping. This paper presents an experimental investigation into the in-cylinder flow characteristics and combustion development in an optical engine operating in HCCI combustion mode. PIV measurements have been taken under motored engine conditions to provide a quantitative flow characterisation of negative valve overlap in-cylinder flows. The ignition and combustion process was imaged using a high resolution charge coupled device (CCD) camera and the combustion imaging data was supplemented by simultaneously recorded in-cylinder pressure data which assisted the analysis of the images. It is found that the flow characteristics with negative valve overlapping are less stable and more valve event driven than typical spark ignition in-cylinder flows, while the combustion initiation locations are not uniformly distributed.

  5. Size Distribution of Particles Emitted from Liquefied Natural Gas Fueled Engine

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The results of measurements conducted to determine the number and mass concentration of particles emitted from the liquefied natural gas (LNG) fueled spark ignition engines are presented. Particle size distributions were measured at different speeds, different loads and ESC cycles. The nanoparticles with diameter smaller than 39nm, measured by the electrical low-pressure impactor (ELPI), are dominant in number concentration that is nearly 92.7% of the total number of the emitted particles at the peak point. As for the mass of emission particle, it is shown that the mass of the particles greater than 1.2μm is more than 65% that of the emitted particles.

  6. Engine modeling and control modeling and electronic management of internal combustion engines

    CERN Document Server

    Isermann, Rolf

    2014-01-01

    The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software developm...

  7. Higher Order Continuous SI Engine Observers

    DEFF Research Database (Denmark)

    Vesterholm, Thomas; Hendricks, Elbert; Houbak, Niels

    1992-01-01

    A nonlinear compensator for the fuel film dynamics and a second order nonlinear observer for a spark ignition engine are presented in this paper. The compensator and observer are realized as continuous differential equations and an especially designed integration algorithm is used to integrate them...... in real time. Using these means, accurate steady state and transient air/fuel control can be obtained with excellent robustness properties. Some useful condition monitoring facilities are also available in the observer. The compensator and observer are based on a Mean Value Engine Model (MVEM) presented...... earlier. A MVEM is one which predicts the mean value of the engine states and internal variables over time scales which are large compared to the cyclic engine process....

  8. Continuous Identification of a Four-Stroke SI Engine

    DEFF Research Database (Denmark)

    Melgaard, Henrik; Hendricks, Elbert; Madsen, Henrik

    1990-01-01

    Compact engine models often consist of a set of nonlinear differential equations which predict the time development of the mean value of the engine state variables (and perhaps some internal variables): such models are sometimes called mean value engine models. Currently a great deal of attention...... is focused on constructing such continuous time models and on finding their parameters. This paper shows, that it is possible to identify an engine model from a linearized version of a mean value model for a CFI four-cycle spark ignition (SI) engine. Such an approach is useful because it preserves a physical...... understanding of the engine throughout the identification stage. Afterwards the identification results are available for general dynamic engine studies. The identfication techniques discussed in this paper include classical methods (step response) as well as modern statistical methods (Kalman filtering...

  9. STUDIES AND EXPERIMENTAL RESEARCH CONCERNING THE PERFORMANCES OF THE INTERNAL COMBUSTION ENGINE, CONTROLLED OVER THE POWERTRAIN CONTROL MODULE

    Directory of Open Access Journals (Sweden)

    Narcis URICANU

    2012-05-01

    Full Text Available the paper present how can be controlled a road vehicle through a powertrain control module, a type of ECU, programmable ECU (Electronic Control Unit, when we want to increase the performances of the engine, compared with the standard performances of the engine. The programmable ECU is a control system which replaces the ECU from the vehicle and is able to manage, better than the standard ECU, the behaviour of the spark ignition engine on increasing the performances. Sports cars need to obtain the best performances from them engine, the specific regimes at which them must function impose certain limits which will be achieved during the competition. Nowadays the vehicles designers and engineering, working for the production cars, have adopted many solutions from the race cars area, due to the advantage offered by these elements (lightweight materials, fasts responses, high speeds and system like programmable ECU. To obtain more power on the engine, we have to find and applied the best solution concerning the internal combustion processes and the consequences concerning the exhaust. This papers present who can be increased the performances of the spark ignition engine through the air-flow ratio, controlled by the programmable ECU and with the sensors help, like water temperature sensor, intake air temperature sensor, throttle position sensor, lambda sensor

  10. Additive Manufacturing for Affordable Rocket Engines

    Science.gov (United States)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch

  11. Stirling engine application study

    Science.gov (United States)

    Teagan, W. P.; Cunningham, D.

    1983-01-01

    A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

  12. Basic Study on Engine with Scroll Compressor and Expander

    Science.gov (United States)

    Morishita, Etsuo; Kitora, Yoshihisa; Nishida, Mitsuhiro

    Scroll compressors are becoming popular in air conditioning and refrigeration. This is primarily due to their higher efficiency and low noise/vibration characteristics. The scroll principle can be applied also to the steam expander and the Brayton cycle engine,as shown in the past literature. The Otto cycle spark-ignition engine with a scroll compressor and expander is studied in this report. The principle and basic structure of the scroll engine are explained,and the engine characteristic are calculated based on the idealized cycles and processes. A prototype model has been proposed and constructed. The rotary type engine has always had a problem with sealing. The scroll engine might overcome this shortcoming with its much lower rubbing speed compared to its previous counterparts,and is therefore worth investigating.

  13. Engine Control Improvement through Application of Chaotic Time Series Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.B., Jr.; Daw, C.S.

    2003-07-15

    The objective of this program was to investigate cyclic variations in spark-ignition (SI) engines under lean fueling conditions and to develop options to reduce emissions of nitrogen oxides (NOx) and particulate matter (PM) in compression-ignition direct-injection (CIDI) engines at high exhaust gas recirculation (EGR) rates. The CIDI activity builds upon an earlier collaboration between ORNL and Ford examining combustion instabilities in SI engines. Under the original CRADA, the principal objective was to understand the fundamental causes of combustion instability in spark-ignition engines operating with lean fueling. The results of this earlier activity demonstrated that such combustion instabilities are dominated by the effects of residual gas remaining in each cylinder from one cycle to the next. A very simple, low-order model was developed that explained the observed combustion instability as a noisy nonlinear dynamical process. The model concept lead to development of a real-time control strategy that could be employed to significantly reduce cyclic variations in real engines using existing sensors and engine control systems. This collaboration led to the issuance of a joint patent for spark-ignition engine control. After a few years, the CRADA was modified to focus more on EGR and CIDI engines. The modified CRADA examined relationships between EGR, combustion, and emissions in CIDI engines. Information from CIDI engine experiments, data analysis, and modeling were employed to identify and characterize new combustion regimes where it is possible to simultaneously achieve significant reductions in NOx and PM emissions. These results were also used to develop an on-line combustion diagnostic (virtual sensor) to make cycle-resolved combustion quality assessments for active feedback control. Extensive experiments on engines at Ford and ORNL led to the development of the virtual sensor concept that may be able to detect simultaneous reductions in NOx and PM

  14. Analysis of the piston ring/liner oil film development during warm-up for an SI-engine

    DEFF Research Database (Denmark)

    Frølund, Kent; Schramm, Jesper; Tian, T.;

    2001-01-01

    A one-dimensional ring-pack lubrication model developed at MIT is applied to simulate the oil film behavior during the warm-up period of a Kohler spark ignition engine. This is done by making assumptions for the evolution of the ail temperatures during warm-up and that the oil control ring during...... downstrokes is fully, flooded. The ring-pack lubrication model includes features such as three different lubrication regimes, i.e., pure hydro-dynamic lubrication, boundary lubrication and pure asperity contact, nonsteady wetting of both inlet and outlet of the piston ring, capability to use all ring face...

  15. Fine particulate emissions of internal combustion engines; Feinpartikel-Emissionen von Verbrennungsmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, A. [TTM Technik Thermische Maschinen, Niederrohrdorf (Switzerland)

    2000-06-01

    The contribution presents data on particulate emissions of road vehicles, e.g. emission factors, scattering ranges, grain sizes, constituents. Spark ignition engines, diesel engines, four-stroke gas engines and two-stroke spark ignition engines are considered. Abrasion of brakes and tyres is mentioned as well as the effects on human lungs. Standardisation efforts so far are mentioned in the contribution. [German] Im Beitrag wird zunaechst der Begriff 'Feinpartikel' definiert. Das heisst, wie fein sind die Feinpartikel, welche Eigenschaften sie haben und warum sie im vorliegenden Zusammenhang von zunehmender Bedeutung sind. Partikel treten entsprechend ihrem Entstehungsprozess bevorzugt in drei Bereichen auf. Man spricht haeufig von drei-modalen-Verteilung: Nuklei-Modus, Akkumulations-Modus, Grobpartikel. Im Beitrag werden Zahlenwertangaben ueber die Partikelemissionen des Strassenverkehrs gemacht, etwa wie: Emissionsfaktoren, Streubereiche, Korngroessen und Inhaltsstoffe. Betrachtet werden die Motorentypen: Otto-, Diesel- und Otto-Gasmotor (Viertakter), sowie Zweitakt-Ottomotoren. Darueber hinaus werden Brems- und Reifenabriebe sowie Partikel aus Kupplungsverschleiss detailliert angesprochen. Der Mechanismus der Auswirkungen auf die menschliche Lunge wird ausfuehrlich erklaert. Erste Ansaetze zur Standardisierung der Feinpartikelemission haben sich mit Ruecksicht auf die gesundheitlichen Wirkungen bereits entwickelt und werden im Beitrag erwaehnt. (AFK)

  16. Modeling and Multi-Objective Optimization of Engine Performance and Hydrocarbon Emissions via the Use of a Computer Aided Engineering Code and the NSGA-II Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Richard Fiifi Turkson

    2016-01-01

    Full Text Available It is feared that the increasing population of vehicles in the world and the depletion of fossil-based fuel reserves could render transportation and other activities that rely on fossil fuels unsustainable in the long term. Concerns over environmental pollution issues, the high cost of fossil-based fuels and the increasing demand for fossil fuels has led to the search for environmentally friendly, cheaper and efficient fuels. In the search for these alternatives, liquefied petroleum gas (LPG has been identified as one of the viable alternatives that could be used in place of gasoline in spark-ignition engines. The objective of the study was to present the modeling and multi-objective optimization of brake mean effective pressure and hydrocarbon emissions for a spark-ignition engine retrofitted to run on LPG. The use of a one-dimensional (1D GT-Power™ model, together with Group Method of Data Handling (GMDH neural networks, has been presented. The multi-objective optimization was implemented in MATLAB® using the non-dominated sorting genetic algorithm (NSGA-II. The modeling process generally achieved low mean squared errors (0.0000032 in the case of the hydrocarbon emissions model for the models developed and was attributed to the collection of a larger training sample data using the 1D engine model. The multi-objective optimization and subsequent decisions for optimal performance have also been presented.

  17. Experimental investigation of ethanol blends with gasoline on SI engine

    Directory of Open Access Journals (Sweden)

    Gaurav tiwari

    2014-10-01

    Full Text Available Automobile have become a very important part of our modern life style. But the future of automobile based on internal combustion engines has been badly affected by two major problems. That is less availability of fuel and environmental degradation. So it is very important to found some new renewable non polluting alternative fuels to ensure the proper and safe survival of internal combustion engines. In present study we evaluate the performance of two stroke single cylinder spark ignition engine with ratio of 10% 20% and 30% of ethanol and gasoline by volume. Performance parameters (brake thermal efficiency, brake specific energy consumption and brake specific fuel consumption were determined at various loads on engine with ethanol blended gasoline. The comparison was made on performance of conventional SI engine with pure gasoline operation. As a result, brake thermal efficiency, brake specific fuel consumption and brake specific fuel consumption showed comparable performance when compared with pure gasoline performances.

  18. Internal combustion piston engines

    Energy Technology Data Exchange (ETDEWEB)

    Segaser, C.L.

    1977-07-01

    Current worldwide production of internal combustion piston engines includes many diversified types of designs and a very broad range of sizes. Engine sizes range from a few horsepower in small mobile units to over 40,000 brake horsepower in large stationary and marine units. The key characteristics of internal combustion piston engines considered appropriate for use as prime movers in Integrated Community Energy Systems (ICES) are evaluated. The categories of engines considered include spark-ignition gas engines, compression-ignition oil (diesel) engines, and dual-fuel engines. The engines are evaluated with respect to full-load and part-load performance characteristics, reliability, environmental concerns, estimated 1976 cost data, and current and future status of development. The largest internal combustion piston engines manufactured in the United States range up to 13,540 rated brake horsepower. Future development efforts are anticipated to result in a 20 to 25% increase in brake horsepower without increase in or loss of weight, economy, reliability, or life expectancy, predicated on a simple extension of current development trends.

  19. 17. Aachen colloquium automobile and engine technology. Proceedings; 17. Aachener Kolloquium Fahrzeug- und Motorentechnik. Kolloquiumsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The Proceedings of the '17th Aachener Colloquium - Automobile and Engine Tecnology', held 6. - 8.October 2008 in Aachen/Germany, contains effectively 104 papers. These contributions deal with the following main subjects:new diesel engines I and II; hybrids I and II; CAE-methods; friction estimation by sensor fusion; ADAS for increased traffic safety I and II; new spark ignition engines I-III; exhausat aftertreatment diesel engines; FVV-project reports; integrated chassis control systems; driver assistance in commercial vehicles; si engines with alternative fuels; engine acoustics; steering systems I and II; detection traffic environment for ADAS; combustion concepts EGR and VVT; engine mechanics; development of safe vehicle systems; supercharging - downsizing; emission concepts diesel engines I and II; automotive strategy concepts; suspension systems; vehicle development; integrated safety;chasis systems. (org.)

  20. Automobile: the engine gets rid of the cam-shaft; Automobile: le moteur s'affranchit de l'arbre a cames

    Energy Technology Data Exchange (ETDEWEB)

    Bocquet, P.Y.

    2005-09-01

    Presented by Valeo company at the Frankfurt exhibition, the system of electromagnetic valve management ('Camless') allows to improve the efficiency of spark ignition engines with an expected fuel saving of 20%. In this system, the opening and closing of each valve is independently controlled by an electromagnet, which allows to improve the fuel-air mixture and eventually neutralize one or several cylinders at idle speed. The main stakes remains the electrical consumption which is linked with the fastness of the system. Short paper. (J.S.)

  1. Control of fast non linear systems - application to a turbo charged SI engine with variable valve timing; controle des systemes rapides non lineaires - application au moteur a allumage commande turbocompresse a distribution variable

    Energy Technology Data Exchange (ETDEWEB)

    Colin, G.

    2006-10-15

    Spark ignition engine control has become a major issue for the compliance with emissions legislation while ensuring driving comfort. Engine down-sizing is one of the promising ways to reduce fuel consumption and resulting CO{sub 2} emissions. Combining several existing technologies such as supercharging and variable valve actuation, down-sizing is a typical example of the problems encountered in Spark Ignited (SI) engine control: nonlinear systems with saturation of actuators; numerous major physical phenomena not measurable; limited computing time; control objectives (consumption, pollution, performance) often competing. A methodology of modelling and model-based control (internal model and predictive control) for these systems is also proposed and applied to the air path of the down-sized engine. Models, physicals and generics, are built to estimate in-cylinder air mass, residual burned gases mass and air scavenged mass from the intake to the exhaust. The complete and generic engine torque control architecture for the turbo-charged SI engine with variable cam-shaft timing was tested in simulation and experimentally (on engine and vehicle). These tests show that new possibilities are offered in order to decrease pollutant emissions and optimize engine efficiency. (author)

  2. Combustion in Homogeneous Charge Compression Ignition Engines: Experiments and Detailed Chemical Kinetic Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Flowers, D L

    2002-06-07

    Homogeneous charge compression ignition (HCCI) engines are being considered as an alternative to diesel engines. The HCCI concept involves premixing fuel and air prior to induction into the cylinder (as is done in current spark-ignition engine) then igniting the fuel-air mixture through the compression process (as is done in current diesel engines). The combustion occurring in an HCCI engine is fundamentally different from a spark-ignition or Diesel engine in that the heat release occurs as a global autoignition process, as opposed to the turbulent flame propagation or mixing controlled combustion used in current engines. The advantage of this global autoignition is that the temperatures within the cylinder are uniformly low, yielding very low emissions of oxides of nitrogen (NO{sub x}, the chief precursors to photochemical smog). The inherent features of HCCI combustion allows for design of engines with efficiency comparable to, or potentially higher than, diesel engines. While HCCI engines have great potential, several technical barriers exist which currently prevent widespread commercialization of this technology. The most significant challenge is that the combustion timing cannot be controlled by typical in-cylinder means. Means of controlling combustion have been demonstrated, but a robust control methodology that is applicable to the entire range of operation has yet to be developed. This research focuses on understanding basic characteristics of controlling and operating HCCI engines. Experiments and detailed chemical kinetic simulations have been applied to the characterize some of the fundamental operational and design characteristics of HCCI engines. Experiments have been conducted on single and multi-cylinder engines to investigate general features of how combustion timing affects the performance and emissions of HCCI engines. Single-zone modeling has been used to characterize and compare the implementation of different control strategies. Multi

  3. E85 Optimized Engine

    Energy Technology Data Exchange (ETDEWEB)

    Bower, Stanley [Ford Motor Company, Dearborn, MI (United States)

    2011-12-31

    A 5.0L V8 twin-turbocharged direct injection engine was designed, built, and tested for the purpose of assessing the fuel economy and performance in the F-Series pickup of the Dual Fuel engine concept and of an E85 optimized FFV engine. Additionally, production 3.5L gasoline turbocharged direct injection (GTDI) EcoBoost engines were converted to Dual Fuel capability and used to evaluate the cold start emissions and fuel system robustness of the Dual Fuel engine concept. Project objectives were: to develop a roadmap to demonstrate a minimized fuel economy penalty for an F-Series FFV truck with a highly boosted, high compression ratio spark ignition engine optimized to run with ethanol fuel blends up to E85; to reduce FTP 75 energy consumption by 15% - 20% compared to an equally powered vehicle with a current production gasoline engine; and to meet ULEV emissions, with a stretch target of ULEV II / Tier II Bin 4. All project objectives were met or exceeded.

  4. Diesel and gasoline engines VI. Quality injection, fuel mixture, simulation, application, metrology; Diesel- und Benzindirekteinspritzung VI. Einspritzqualitaet, Gemischbildung, Simulation, Applikation, Messtechnik

    Energy Technology Data Exchange (ETDEWEB)

    Tschoeke, Helmut (ed.) [Otto-von-Guericke-Univ., Magdeburg (DE). Inst. fuer Mobile Systeme (IMS)

    2011-07-01

    applications and mobile work machines (Rudolf Menne); (16) Spray requirements and volume requirements at injection systems for spark ignition DI engines for fulfilling future consumption targets and emission targets (Uwe Schaupp); (17) Injection systems for spark ignition engines within the limits of the optimization of particle emissions and CO{sub 2} optimization (Holger Frenzel); (18) Cycle accurate control of the fuel feed and carburetion for low-emission GDI combustion processes (Martin Duerrwaechter); (19) Influence of the spray characteristics of a piezo-A-nozzle on the inflammation at spray guided combustion processes (Tobias Breuninger); (20) Laser optical investigations for carburetion and combustion of alcohols as an alternative fuel during gasoline direct injection (Jan Dyckmans); (21) Influence of injection pressures till to 1,000 bar on the carburetion in a spark ignition engine with direct injection (Stefan Buri); (22) From an automated calibration to self adjustment of the rail pressure regulation of DI spark ignition engines (Claus Kirchner); (23) Future engine control systems for spark ignition engines 2015ff: Requirements and solutions (Roland Herynek); (24) Euro VI particulate limits: Methods of development for GDI engines (Heribert Fuchs).

  5. Development and Test of a new Concept for Biomass Producer Gas Engines

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Foged, Esben Vendelbo; Strand, Rune;

    The technical requirements and the economical assessment of converting commercial diesel engine gen-sets into high compression spark ignition operation on biomass producer gas have been investigated. Assessments showed that for a 200 kWe gen-set there would be a financial benefit of approximately...... 600.000 DKK corresponding to a reduction of 60% in investment costs compared to the price of a conventional gas engine gen-set. Experimental investigations have been conducted on two identical small scale SI gas engine gen-sets operating on biomass producer gas from thermal gasification of wood....... The engines were operated with two different compression ratios, one with the original compression ratio for natural gas operation 9.5:1, and the second with a compression ratio of 18.5:1 (converted diesel engine). It was shown that high compression ratio SI engine operation was possible when operating...

  6. Emission and Combustion Characteristics of Si Engine Working Under Gasoline Blended with Ethanol Oxygenated Organic Compounds

    Directory of Open Access Journals (Sweden)

    Dhanapal Balaji

    2010-01-01

    Full Text Available Problem statement: The objective of this study is to investigate the effect of using unleaded gasoline and additives blends on Spark Ignition engine (SI engine combustion and exhaust emission. Approach: A four stroke, single cylinder SI engine was used for conducting this study. Exhaust emissions were analysed for Carbon Monoxide (CO, Hydrocarbon (HC and Oxides of Nitrogen (NOx and carbon dioxide (CO2 using unleaded gasoline and additives blends with different percentages of fuel at varying engine torque condition and constant engine speed. Results: The result showed that the blending of unleaded gasoline increases the octane number and power output this may leads to increase the brake thermal efficiency. The CO, HC and NOx emissions concentrations in the engine exhaust decreases while the CO2 concentration increases. Conclusion: Using ethanol as a fuel additive to unleaded gasoline causes an improvement in combustion characteristics and significant reduction in exhaust emissions.

  7. A study on emission characteristics of an EFI engine with ethanol blended gasoline fuels

    Science.gov (United States)

    He, Bang-Quan; Wang, Jian-Xin; Hao, Ji-Ming; Yan, Xiao-Guang; Xiao, Jian-Hua

    The effect of ethanol blended gasoline fuels on emissions and catalyst conversion efficiencies was investigated in a spark ignition engine with an electronic fuel injection (EFI) system. The addition of ethanol to gasoline fuel enhances the octane number of the blended fuels and changes distillation temperature. Ethanol can decrease engine-out regulated emissions. The fuel containing 30% ethanol by volume can drastically reduce engine-out total hydrocarbon emissions (THC) at operating conditions and engine-out THC, CO and NO x emissions at idle speed, but unburned ethanol and acetaldehyde emissions increase. Pt/Rh based three-way catalysts are effective in reducing acetaldehyde emissions, but the conversion of unburned ethanol is low. Tailpipe emissions of THC, CO and NO x have close relation to engine-out emissions, catalyst conversion efficiency, engine's speed and load, air/fuel equivalence ratio. Moreover, the blended fuels can decrease brake specific energy consumption.

  8. A Study on Homogeneous Charge Compression Ignition Gasoline Engines

    Science.gov (United States)

    Kaneko, Makoto; Morikawa, Koji; Itoh, Jin; Saishu, Youhei

    A new engine concept consisting of HCCI combustion for low and midrange loads and spark ignition combustion for high loads was introduced. The timing of the intake valve closing was adjusted to alter the negative valve overlap and effective compression ratio to provide suitable HCCI conditions. The effect of mixture formation on auto-ignition was also investigated using a direct injection engine. As a result, HCCI combustion was achieved with a relatively low compression ratio when the intake air was heated by internal EGR. The resulting combustion was at a high thermal efficiency, comparable to that of modern diesel engines, and produced almost no NOx emissions or smoke. The mixture stratification increased the local A/F concentration, resulting in higher reactivity. A wide range of combustible A/F ratios was used to control the compression ignition timing. Photographs showed that the flame filled the entire chamber during combustion, reducing both emissions and fuel consumption.

  9. Engine with pulse-suppressed dedicated exhaust gas recirculation

    Science.gov (United States)

    Keating, Edward J.; Baker, Rodney E.

    2016-06-07

    An engine assembly includes an intake assembly, a spark-ignited internal combustion engine, and an exhaust assembly. The intake assembly includes a charge air cooler disposed between an exhaust gas recirculation (EGR) mixer and a backpressure valve. The charge air cooler has both an inlet and an outlet, and the back pressure valve is configured to maintain a minimum pressure difference between the inlet of the charge air cooler and an outlet of the backpressure valve. A dedicated exhaust gas recirculation system is provided in fluid communication with at least one cylinder and with the EGR mixer. The dedicated exhaust gas recirculation system is configured to route all of the exhaust gas from the at least one cylinder to the EGR mixer for recirculation back to the engine.

  10. Co-Optimization of Internal Combustion Engines and Biofuels

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Robert L.

    2016-03-08

    The development of advanced engines has significant potential advantages in reduced aftertreatment costs for air pollutant emission control, and just as importantly for efficiency improvements and associated greenhouse gas emission reductions. There are significant opportunities to leverage fuel properties to create more optimal engine designs for both advanced spark-ignition and compression-ignition combustion strategies. The fact that biofuel blendstocks offer a potentially low-carbon approach to fuel production, leads to the idea of optimizing the entire fuel production-utilization value chain as a system from the standpoint of life cycle greenhouse gas emissions. This is a difficult challenge that has yet to be realized. This presentation will discuss the relationship between chemical structure and critical fuel properties for more efficient combustion, survey the properties of a range of biofuels that may be produced in the future, and describe the ongoing challenges of fuel-engine co-optimization.

  11. Investigation of work parameters of SI engine dedicated to energetics aggregates with pneumatic injection system

    Science.gov (United States)

    Marek, W.; Śliwiński, K.

    2016-09-01

    The article presents the possibilities of alternative fuel combustion in the engine four- stroke spark ignition engines. Power of the motor was carried out pneumatic fuel injection system using a hot gas developed by Prof. Stanislaw Jarnuszkiewicz. Presented made the position of the measuring system with the power and results. The engine experimental at the time of the study was powered by a blend of alcohol and gasoline. The main aim of the study was the question of control fuel dosage, taking into account the energy needs of forcing the engine load. During the tests carried load characteristics control the motor using the power control quality. Another issue was the elimination of penetration of fuel to the engine lubrication system, a problem occurred in the initial study on the issue of the pneumatic fuel injection using the hot exhaust gases. In summary we present the findings of this phase of the study.

  12. EFFECT OF IGNITION TIMING ON THE PERFORMANCE OF LPG FUELLED SI ENGINE

    Directory of Open Access Journals (Sweden)

    R.M.Dabhadkar

    2013-05-01

    Full Text Available Fast depletion of fossil fuels and their detrimental effect on the environment is demanding an urgent need of alternative fuels for meeting sustainable energy demand with minimum environmental impact.A lot of research is being carried out throughout the world to evaluate the performance, exhaust emission and combustion characteristics of the existing engines using several alternative fuels such as hydrogen, compressed natural gas, alcohols, liquefied petroleum gas (LPG, biogas, producer gas, bio-diesels developed from vegetable oils, and others (Roy et. al, 2010. LPG and CNG are the alternative fuels to be widely adopted for use in the world. Gaseous fuel mix uniformly with air which burns precisely during combustion than liquid fuels. It has minimum carbon deposition & negligible physical delay. Internal combustion engines running on liquid petroleum gas (LPG are well-proven technologies and work much likegasoline-powered spark-ignition engines. They are normally used as spark-ignition engines for bi-fuelled (gasoline/CH4 cars, but have also been used, for example, in compression-ignition engines for heavy-duty vehicles. Both LPG and NG are not used alone, but always in bi-fuel vehicles, in combination with gasoline. In bi-fuel vehicles two fuels are stored in separate tanks and the engine runs on one fuel at a time. Bi-fuel vehicles have the capability to switch back and forth from gasoline to the other fuel, manually or automatically. As a fuel for spark-ignition engines LPG have some advantages over gasoline, such as a better anti-knock characteristic and reduced CO and unburned HC emissions (Hsieh et al., 2002. Environmental point of view is that there is an increasing interest among the suppliers to investigate LPG as a transportation fuel.It was found that the liquid petroleum gas, roughly a mixture of propane and butane, which gives a benefit in terms of toxic hydrocarbons emissions and ozone formation due to its composition and CO2

  13. Performance and Emission Studies of a SI Engine using Distilled Plastic Pyrolysis Oil-Petrol Blends

    Directory of Open Access Journals (Sweden)

    Kumar Kareddula Vijaya

    2016-01-01

    Full Text Available In the present work, an experimental investigation is carried out to evaluate the use of plastic oil derived from waste plastic which used in a Spark Ignition engine. Experiments are conducted, the measured performance and emissions of plastic oil blends at different proportions are compared with the baseline operation of the SI engine running with gasoline fuel. Engine performance and exhaust gas emissions such as carbon monoxide, total unburned hydrocarbons, carbon dioxide and oxides of nitrogen are measured. From the experiments it is observed that 50% Distilled Plastic Pyrolysis Oil (50%DPPO exhibits the substantial enhancement in brake power, brake thermal efficiency and reduction in brake specific fuel consumption running at full load conditions among different blends and pure petrol. There is also noticed decrement of carbon dioxide and unburned hydrocarbons emissions at the same blend. The experimental result shows that plastic oil shall conveniently be used as a substitute to gasoline in the existing SI engines without any modifications.

  14. Possibilities to identify engine combustion model parameters by analysis of the instantaneous crankshaft angular speed

    Directory of Open Access Journals (Sweden)

    Popović Slobodan J.

    2014-01-01

    Full Text Available In this paper, novel method for obtaining information about combustion process in individual cylinders of a multi-cylinder Spark Ignition Engine based on instantaneous crankshaft angular velocity is presented. The method is based on robust box constrained Levenberg-Marquardt minimization of nonlinear Least Squares given for measured and simulated instantaneous crankshaft angular speed which is determined from the solution of the engine dynamics torque balance equation. Combination of in-house developed comprehensive Zero-Dimensional Two-Zone SI engine combustion model and analytical friction loss model in angular domain have been applied to provide sensitivity and error analysis regarding Wiebe combustion model parameters, heat transfer coefficient and compression ratio. The analysis is employed to evaluate the basic starting assumption and possibility to provide reliable combustion analysis based on instantaneous engine crankshaft angular speed. [Projekat Ministarstva nauke Republike Srbije, br. NPEE-290025 and TR-14074

  15. S.I. engine idle control improvement by using automobile reversible alternator

    Energy Technology Data Exchange (ETDEWEB)

    Kouadio, L.; Bidan, P.; Valentin, M.; Berry, J.P.

    1995-12-31

    This paper describes the improvements which can be made to spark ignition engine by extensive use of automatic control. Particular emphasis is placed on fast transient phases produced by simultaneous action on the throttle and the electronic fuel injection device. The aim is to achieve better performance for the fuel/air ratio regulation system, thereby improving engine efficiency and exhaust emission during these transient phases. The authors begin by presenting an average dynamic model of the intake manifold validated on an engine test bench and goes on to develop a closed-loop system controlling average pressure in the intake manifold using the reference tracking model method. The air supply control system is combined with a predictor to compensate for delays in the injection procedure. The paper concludes with a comparison between the results obtained using simulation and those obtained experimentally from the engine. (authors) 15 refs.

  16. Performance analysis and optimization of a supercharged Miller cycle Otto engine

    Energy Technology Data Exchange (ETDEWEB)

    Chih Wu; Puzinauskas, P.V. [US Naval Academy, Annapolis, MD (United States). Dept. of Mechanical Engineering; Tsai, J.S. [Yung Ta Institute of Technology and Commerce, Ping Tung (China). Dept. of Mechanical Engineering

    2003-04-01

    One of the major alternatives of the Otto cycle has been examined to determine its potential for increased efficiency and net work power in the spark ignited internal combustion engine is to shorten the compression process relative to the expansion process by early close or late of intake valve. The modified Otto cycle is called Miller cycle. This paper deals with the analysis of a supercharged Otto engine adopted for Miller cycle operation. The Miller cycle shows no efficiency advantage and suffers a penalty in power output in the normally aspirated version. In the supercharged Otto engine adopted for Miller cycle version, it has no efficiency advantage but does provide increased net work output with reduced propensity to engine knock problem. Sensitivity analysis of cycle efficiency versus early close of intake valve and that of cycle net work versus early close of intake valve are performed. Optimization on the cycle efficiency is obtained. (author)

  17. Are Published Minimum Vapor Phase Spark Ignition Energy Data Valid?

    Energy Technology Data Exchange (ETDEWEB)

    Staggs, K J; Alvares, N J; Greenwood, D W

    2001-11-21

    The use of sprayed flammable fluids as solvents in dissolution and cleaning processes demand detailed understanding of ignition and fire hazards associated with these applications. When it is not feasible to inert the atmosphere in which the spraying process takes place, then elimination of all possible ignition sources must be done. If operators are involved in the process, the potential for human static build-up and ultimate discharge is finite, and it is nearly impossible to eliminate. The specific application discussed in this paper involved the use of heated Dimethyl Sulfoxide (DMSO) to dissolve high explosives (HE). Search for properties of DMSO yielded data on flammability limits and flash point, but there was no published information pertaining to the minimum energy for electrical arc ignition. Due to the sensitivity of this procedure, The Hazards Control Department of Lawrence Livermore National Laboratory (LLNL) was tasked to determine the minimum ignition energy of DMSO aerosol and vapor an experimental investigation was thus initiated. Because there were no electrical sources in spray chamber, Human Electro-Static Discharge (HESD) was the only potential ignition source. Consequently, the electrostatic generators required for this investigation were designed to produce electrostatic arcs with the defined voltage and current pulse characteristics consistent with simulated human capacitance. Diagnostic procedures required to insure these characteristics involve specific data gathering techniques where the voltage and current sensors are in close proximity to the electrodes, thus defining the arc energy directly between the electrodes. The intriguing finding derived from this procedure is how small these measured values are relative to the arc energy as defined by the capacitance and the voltage measure at the capacitor terminals. The suggested reason for this difference is that the standard procedure for determining arc energy from the relation; E = 1/2CV{sup 2} does not account for the total capacitance and impedance of the system.

  18. Advanced Natural Gas Reciprocating Engine(s)

    Energy Technology Data Exchange (ETDEWEB)

    Pike, Edward

    2014-03-31

    The objective of the Cummins ARES program, in partnership with the US Department of Energy (DOE), is to develop advanced natural gas engine technologies that increase engine system efficiency at lower emissions levels while attaining lower cost of ownership. The goals of the project are to demonstrate engine system achieving 50% Brake Thermal Efficiency (BTE) in three phases, 44%, 47% and 50% (starting baseline efficiency at 36% BTE) and 0.1 g/bhp-hr NOx system out emissions (starting baseline NOx emissions at 2 – 4 g/bhp-hr NOx). Primary path towards above goals include high Brake Mean Effective Pressure (BMEP), improved closed cycle efficiency, increased air handling efficiency and optimized engine subsystems. Cummins has successfully demonstrated each of the phases of this program. All targets have been achieved through application of a combined set of advanced base engine technologies and Waste Heat Recovery from Charge Air and Exhaust streams, optimized and validated on the demonstration engine and other large engines. The following architectures were selected for each Phase: Phase 1: Lean Burn Spark Ignited (SI) Key Technologies: High Efficiency Turbocharging, Higher Efficiency Combustion System. In production on the 60/91L engines. Over 500MW of ARES Phase 1 technology has been sold. Phase 2: Lean Burn Technology with Exhaust Waste Heat Recovery (WHR) System Key Technologies: Advanced Ignition System, Combustion Improvement, Integrated Waste Heat Recovery System. Base engine technologies intended for production within 2 to 3 years Phase 3: Lean Burn Technology with Exhaust and Charge Air Waste Heat Recovery System Key Technologies: Lower Friction, New Cylinder Head Designs, Improved Integrated Waste Heat Recovery System. Intended for production within 5 to 6 years Cummins is committed to the launch of next generation of large advanced NG engines based on ARES technology to be commercialized worldwide.

  19. Neural control of fast nonlinear systems--application to a turbocharged SI engine with VCT.

    Science.gov (United States)

    Colin, Guillaume; Chamaillard, Yann; Bloch, Gérard; Corde, Gilles

    2007-07-01

    Today, (engine) downsizing using turbocharging appears as a major way in reducing fuel consumption and pollutant emissions of spark ignition (SI) engines. In this context, an efficient control of the air actuators [throttle, turbo wastegate, and variable camshaft timing (VCT)] is needed for engine torque control. This paper proposes a nonlinear model-based control scheme which combines separate, but coordinated, control modules. Theses modules are based on different control strategies: internal model control (IMC), model predictive control (MPC), and optimal control. It is shown how neural models can be used at different levels and included in the control modules to replace physical models, which are too complex to be online embedded, or to estimate nonmeasured variables. The results obtained from two different test benches show the real-time applicability and good control performance of the proposed methods.

  20. Data structure for estimating emissions from non-road sources

    Energy Technology Data Exchange (ETDEWEB)

    Sorenson, S. C.; Kalivoda, M.; Vacarro, R.; Trozzi, C.; Samaras, Z.; Lewis, C.A.

    1997-03-01

    The work described in the following is a portion of the MEET project (Methodologies for Estimation Air Pollutant Emissions from Transport). The overall goal of the MEET project is to consolidate and present methodologies which can be used to estimate air pollutant emissions from various types of traffic sources. One of the goals of MEET is to provide methodologies to be used in the COMMUTE project also funded by DG VII. COMMUTE is developing computer software which can be used to provide emissions inventories on the European scale. Although COMMUTE is viewed as a prime user of the information generated in MEET, the MEET results are intended to be used in a broader area, and on both smaller and larger spatial scales. The methodologies and data presented will be useful for planners on a more local scale than a national or continental basis. While most attention in previous years has been concentrated on emissions from road transport, it has become increasingly apparent in later years that the so-called off road transportation contributes significantly to the emission of air pollutants. The three most common off-road traffic modes are Air Traffic, Rail Traffic, and Ship or Marine traffic. In the following, the basic structure of the methods for estimating the emissions from these sectors will be given and of the input and output data associated with these calculations. The structures will of necessity be different for the different types of traffic. The data structures in the following reflect these variations and uncertainties. In some instances alternative approaches to emissions estimation will be suggested. The user must evaluate the amount and reliability of available data for the application at hand, and select the method which would be expected to give the highest accuracy. In any event, a large amount of uncertainty is inherent in the estimation of emissions from the non-road traffic sources, particularly those involving rail and maritime transport. (EG)

  1. Data structure for estimating emissions from non-road sources

    Energy Technology Data Exchange (ETDEWEB)

    Sorenson, S. C.; Kalivoda, M.; Vacarro, R.; Trozzi, C.; Samaras, Z.; Lewis, C.A.

    1997-03-01

    The work described in the following is a portion of the MEET project (Methodologies for Estimation Air Pollutant Emissions from Transport). The overall goal of the MEET project is to consolidate and present methodologies which can be used to estimate air pollutant emissions from various types of traffic sources. One of the goals of MEET is to provide methodologies to be used in the COMMUTE project also funded by DG VII. COMMUTE is developing computer software which can be used to provide emissions inventories on the European scale. Although COMMUTE is viewed as a prime user of the information generated in MEET, the MEET results are intended to be used in a broader area, and on both smaller and larger spatial scales. The methodologies and data presented will be useful for planners on a more local scale than a national or continental basis. While most attention in previous years has been concentrated on emissions from road transport, it has become increasingly apparent in later years that the so-called off road transportation contributes significantly to the emission of air pollutants. The three most common off-road traffic modes are Air Traffic, Rail Traffic, and Ship or Marine traffic. In the following, the basic structure of the methods for estimating the emissions from these sectors will be given and of the input and output data associated with these calculations. The structures will of necessity be different for the different types of traffic. The data structures in the following reflect these variations and uncertainties. In some instances alternative approaches to emissions estimation will be suggested. The user must evaluate the amount and reliability of available data for the application at hand, and select the method which would be expected to give the highest accuracy. In any event, a large amount of uncertainty is inherent in the estimation of emissions from the non-road traffic sources, particularly those involving rail and maritime transport. (EG)

  2. Assistance to a car heat engine by a self-controlled synchronous machine: engine energy control enhancement and pollutant emission reduction; Assistance d`un moteur thermique d`automobile par une machine synchrone autopilotee: amelioration de la gestion energetique et reduction des polluants du groupe moto-propulseur

    Energy Technology Data Exchange (ETDEWEB)

    Kouadio, L.

    1996-12-12

    A new method for spark-ignition engine control, more especially in idle conditions, has been developed to prevent engine stalling and improve its idling performances in terms of fuel consumption and pollutant emissions: the car synchronous machine, traditionally operating as an alternator, is used in certain phases to provide an external supplementary torque on the engine shaft. Methods are proposed for optimising the synchronous machine operation as a generator and as an engine, then the main engine control parameters are presented and a linear signal model is established around a nominal idling point, which is used for simulations. Experimental results show evident reductions of fuel consumption and a significant robustness improvement in the engine dynamics

  3. Impact of methanol-gasoline fuel blend on the fuel consumption and exhaust emission of a SI engine

    Science.gov (United States)

    Rifal, Mohamad; Sinaga, Nazaruddin

    2016-04-01

    In this study, the effect of methanol-gasoline fuel blend (M15, M30 and M50) on the fuel consumption and exhaust emission of a spark ignition engine (SI) were investigated. In the experiment, an engine four-cylinder, four stroke injection system (engine of Toyota Kijang Innova 1TR-FE) was used. Test were did to know the relation of fuel consumption and exhaust emission (CO, CO2, HC) were analyzed under the idle throttle operating condition and variable engine speed ranging from 1000 to 4000 rpm. The experimental result showed that the fuel consumption decrease with the use of methanol. It was also shown that the CO and HC emission were reduced with the increase methanol content while CO2 were increased.

  4. Fundamental phenomena affecting low temperature combustion and HCCI engines, high load limits and strategies for extending these limits

    KAUST Repository

    Saxena, Samveg

    2013-10-01

    Low temperature combustion (LTC) engines are an emerging engine technology that offers an alternative to spark-ignited and diesel engines. One type of LTC engine, the homogeneous charge compression ignition (HCCI) engine, uses a well-mixed fuel–air charge like spark-ignited engines and relies on compression ignition like diesel engines. Similar to diesel engines, the use of high compression ratios and removal of the throttling valve in HCCI allow for high efficiency operation, thereby allowing lower CO2 emissions per unit of work delivered by the engine. The use of a highly diluted well-mixed fuel–air charge allows for low emissions of nitrogen oxides, soot and particulate matters, and the use of oxidation catalysts can allow low emissions of unburned hydrocarbons and carbon monoxide. As a result, HCCI offers the ability to achieve high efficiencies comparable with diesel while also allowing clean emissions while using relatively inexpensive aftertreatment technologies. HCCI is not, however, without its challenges. Traditionally, two important problems prohibiting market penetration of HCCI are 1) inability to achieve high load, and 2) difficulty in controlling combustion timing. Recent research has significantly mitigated these challenges, and thus HCCI has a promising future for automotive and power generation applications. This article begins by providing a comprehensive review of the physical phenomena governing HCCI operation, with particular emphasis on high load conditions. Emissions characteristics are then discussed, with suggestions on how to inexpensively enable low emissions of all regulated emissions. The operating limits that govern the high load conditions are discussed in detail, and finally a review of recent research which expands the high load limits of HCCI is discussed. Although this article focuses on the fundamental phenomena governing HCCI operation, it is also useful for understanding the fundamental phenomena in reactivity controlled

  5. Comparison of Practical Investigations for CO Emissions Emitted From Single Cylinder S. I. Engine Fueled With Different Kinds of Hydrocarbon Fuels and Hydrogen

    Directory of Open Access Journals (Sweden)

    Khalil Ibrahim Abaas

    2011-01-01

    Full Text Available Liquefied petroleum gas (LPG, Natural gas (NG and hydrogen were all used to operate spark ignition internal combustion engine Ricardo E6. A comparison of CO emissions emitted from each case, with emissions emitted from engine fueled with gasoline as a fuel is conducted.The study was accomplished when engine operated at HUCR for gasoline n(8:1, was compared with its operation at HUCR for each fuel. Compression ratio, equivalence ratio and spark timing were studied at constant speed 1500 rpm.CO concentrations were little at lean ratios; it appeared to be effected a little with equivalence ratio in this side, at rich side its values became higher, and it appeared to be effected by equivalence ratio highly, the results showed that CO emissions resulted from gasoline engine were higher than that resulted from using LPG and NG all the time; while hydrogen engine emitted extremely low CO concentrations.

  6. 40 CFR 89.116 - Engine families.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine families. 89.116 Section 89.116... EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.116 Engine families. (a) A manufacturer's product line is divided into engine families...

  7. Valve Fault Diagnosis in Internal Combustion Engines Using Acoustic Emission and Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    S. M. Jafari

    2014-01-01

    Full Text Available This paper presents the potential of acoustic emission (AE technique to detect valve damage in internal combustion engines. The cylinder head of a spark-ignited engine was used as the experimental setup. The effect of three types of valve damage (clearance, semicrack, and notch on valve leakage was investigated. The experimental results showed that AE is an effective method to detect damage and the type of damage in valves in both of the time and frequency domains. An artificial neural network was trained based on time domain analysis using AE parametric features (AErms, count, absolute AE energy, maximum signal amplitude, and average signal level. The network consisted of five, six, and five nodes in the input, hidden, and output layers, respectively. The results of the trained system showed that the AE technique could be used to identify the type of damage and its location.

  8. The influence of air-fuel ratio on mixture parameters in port fuel injection engines

    Directory of Open Access Journals (Sweden)

    Adrian Irimescu

    2008-10-01

    Full Text Available Nowadays, research in the internal combustion engine field is focusing on detailed understanding of the processes that take place in certain parts of the aggregate, and can have a great influence on the engine’s performance and pollution levels. Such research is developed in this paper, in which using a numerical method based on the i-x air-fuel diagram, one can simulate a series of values for pressure, temperature and intake air humidity before and after mixture formation takes place in a spark ignition engine inlet port. The aim is to evaluate the final temperature of the air-fuel mixture near the inlet valve and evaluating the main factors of influence on the homogeneity of the mixture.

  9. EFFECT OF GASOLINE - ETHANOL BLENDS ON PERFORMANCE AND EMISSION CHARACTERISTICS OF A SINGLE CYLINDER AIR COOLED MOTOR BIKE SI ENGINE

    Directory of Open Access Journals (Sweden)

    A. SAMUEL RAJA

    2015-12-01

    Full Text Available This paper investigates the effect of using gasoline-ethanol (GE blends on performance and exhaust emission of a four stroke 150 cc single cylinder air cooled spark ignition (SI engine, without any modifications. Experiments were conducted at part load and different engine speeds ranging from 3000 to 5000 rpm, without and with catalytic converter. Ethanol content was varied from 5 percentage to 20 percentage by volume and four different blends (E5, E10, E15 and E20 were tested. Fuel consumption, engine speed, air fuel ratio, exhaust gas temperature and exhaust emissions were measured during each experiment. Brake thermal efficiency (ηb,th, volumetric efficiency (ηvol, brake specific fuel consumption (BSFC and excess air factor were calculated for each test run. Brake specific fuel consumption, volumetric efficiency and excess air factor increased with ethanol percentage in the blend. Carbon monoxide (CO, hydrocarbon (HC and oxides of nitrogen (NOx emissions decreased with blends.

  10. Ignition of an automobile engine by high-peak power Nd:YAG/Cr⁴⁺:YAG laser-spark devices.

    Science.gov (United States)

    Pavel, Nicolaie; Dascalu, Traian; Salamu, Gabriela; Dinca, Mihai; Boicea, Niculae; Birtas, Adrian

    2015-12-28

    Laser sparks that were built with high-peak power passively Q-switched Nd:YAG/Cr(4+):YAG lasers have been used to operate a Renault automobile engine. The design of such a laser spark igniter is discussed. The Nd:YAG/Cr(4+):YAG laser delivered pulses with energy of 4 mJ and 0.8-ns duration, corresponding to pulse peak power of 5 MW. The coefficients of variability of maximum pressure (COV(Pmax)) and of indicated mean effective pressure (COV(IMEP)) and specific emissions like hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NO(x)) and carbon dioxide (CO2) were measured at various engine speeds and high loads. Improved engine stability in terms of COV(Pmax) and COV(Pmax) and decreased emissions of CO and HC were obtained for the engine that was run by laser sparks in comparison with classical ignition by electrical spark plugs.

  11. Nonroad developed land in the United States Pacific Northwest for 2001

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This spatial data set was created by the U.S. Geological Survey (USGS) to represent the extent of non-road developed land in the Pacific Northwest region of the...

  12. Gasoline engine EMI suppression system

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, H.A.; Broitman, K.; Evangelista, R.; Teske, R.E.; Sulmone, M.

    1987-09-08

    A spark ignition engine device adapted for use with an internal combustion engine driving an accessory such as a pump in an EMI radiation sensitive environment and mounted in a mounting structure is described comprising: an engine having a magneto flywheel supported for generating an ignition current; first wire means for transmitting ignition current from the magneto flywheel including wires carrying the ignition current and radiated EMI from the magneto and a first conductive shield means covering the wires; a control box positioned on and grounded to the mounting structure; connector means for introducing the first wire means into the control box, including means grounding the first conductive shield to the box to complete transfer of the EMI from the shield to the ground; power pack means mounted in and grounded to the box to control the ignition current and inherently generating additional EMI inside the box; second wire means including wires connected to transmit ignition current from the individual capacitor means to the power pack means whereby the capacitors prevent re-radiation of the EMI generated by the power pack means back to the outside of the box; ignition coil means mounted in and grounded to the box for generating high tension ignition current and inherently generating additional EMI; third wire means including wires connected to transmit ignition current from the power pack means to the input of the ignition coil means, the wires inherently radiating additional EMI.

  13. Application of Hydrogen Assisted Lean Operation to Natural Gas-Fueled Reciprocating Engines (HALO)

    Energy Technology Data Exchange (ETDEWEB)

    Chad Smutzer

    2006-01-01

    Two key challenges facing Natural Gas Engines used for cogeneration purposes are spark plug life and high NOx emissions. Using Hydrogen Assisted Lean Operation (HALO), these two keys issues are simultaneously addressed. HALO operation, as demonstrated in this project, allows stable engine operation to be achieved at ultra-lean (relative air/fuel ratios of 2) conditions, which virtually eliminates NOx production. NOx values of 10 ppm (0.07 g/bhp-hr NO) for 8% (LHV H2/LHV CH4) supplementation at an exhaust O2 level of 10% were demonstrated, which is a 98% NOx emissions reduction compared to the leanest unsupplemented operating condition. Spark ignition energy reduction (which will increase ignition system life) was carried out at an oxygen level of 9%, leading to a NOx emission level of 28 ppm (0.13 g/bhp-hr NO). The spark ignition energy reduction testing found that spark energy could be reduced 22% (from 151 mJ supplied to the coil) with 13% (LHV H2/LHV CH4) hydrogen supplementation, and even further reduced 27% with 17% hydrogen supplementation, with no reportable effect on NOx emissions for these conditions and with stable engine torque output. Another important result is that the combustion duration was shown to be only a function of hydrogen supplementation, not a function of ignition energy (until the ignitability limit was reached). The next logical step leading from these promising results is to see how much the spark energy reduction translates into increase in spark plug life, which may be accomplished by durability testing.

  14. A fuel-efficient cruise performance model for general aviation piston engine airplanes. Ph.D. Thesis. Final Report

    Science.gov (United States)

    Parkinson, R. C. H.

    1983-01-01

    A fuel-efficient cruise performance model which facilitates maximizing the specific range of General Aviation airplanes powered by spark-ignition piston engines and propellers is presented. Airplanes of fixed design only are considered. The uses and limitations of typical Pilot Operating Handbook cruise performance data, for constructing cruise performance models suitable for maximizing specific range, are first examined. These data are found to be inadequate for constructing such models. A new model of General Aviation piston-prop airplane cruise performance is then developed. This model consists of two subsystem models: the airframe-propeller-atmosphere subsystem model; and the engine-atmosphere subsystem model. The new model facilitates maximizing specific range; and by virtue of its implicity and low volume data storge requirements, appears suitable for airborne microprocessor implementation.

  15. Pneumatic injection system using a hot exhaust gases, developed in Institute of Automobiles and Internal Combustion Engines of Cracow University of Technology

    Science.gov (United States)

    Marek, W.; Śliwiński, K.

    2016-09-01

    The article concerns research carried out by the Krakow University of Technology on the concept of a pneumatic fuel injection spark ignition engines. In this artkule an example of an application of this type of power to the Wankel's engine, together with a description of its design and operating principles and the benefits of its use. The work was carried out over many years by Prof. Stanislaw Jarnuszkiewicz despite the development of many patents but not widely used in engines. Authors who were involved in the team-work of the team of Prof. Jarnuszkiewicz, after conducting exploratory studies, believed that this solution has development potential and this will be presented in future articles.

  16. Modular plants with high power gas engines (1 to 30 MWe); Centrales modulaires a moteurs gaz de forte puissance (de 1 a 30 MWe)

    Energy Technology Data Exchange (ETDEWEB)

    Haushalter, J. [Wartsila (France)

    1997-12-31

    This paper is a series of transparencies about the high power gas engines manufactured by Waertsilae NSD Corporation company. The first par recalls the NO{sub x} and CO air pollution regulations worldwide, the German TA-Luft standards and the French 2910 by-law according to the engine type (2 and 4 stroke, dual-fuel, natural gas, LPG, others..) and to the type of pollutants (NO{sub x}, dusts, SO{sub 2}, CO, noise..). The second part presents the Waertsilae NSD Corporation concept of gas-fueled spark ignition engines (Otto cycle, emissions, performances, technology, fuel system, combustion optimization, fuel-air ratio regulation, pollution control equipment) and of the `pure energy` global concept of plants. (J.S.)

  17. Heat transfer from an internal combustion (Otto-cycle) engine on the surface of Mars

    Science.gov (United States)

    Gwynne, Owen

    1992-01-01

    The cooling requirements for an average car sized engine (spark-ignition, V-6, four-stroke, naturally aspirated, about 200 kg, about 100 kW) were looked at for Mars. Several modes of cooling were considered, including forced convection, exhaust, radiation and closed loop systems. The primary goal was to determine the effect of the thinner Martian atmosphere on the cooling system. The results show that there was only a 6-percent difference in the cooling requirements. This difference was due mostly to the thinner atmosphere during forced convection and the heat capacity of the exhaust. A method using a single pass counter-flow heat exchanger is suggested to offset this difference in cooling requirements.

  18. Effect of Modified Design on Engine Fuel Efficiency

    Directory of Open Access Journals (Sweden)

    Abdul Siddique Sk

    2016-09-01

    Full Text Available This paper covers key and representative developments in the area of high efficiency and cleans internal combustion engines. The main objective is to highlight recent efforts to improve (IC engine fuel efficiency and combustion. Rising fuel prices and stringent emission mandates have demanded cleaner combustion and increased fuel efficiency from the IC engine. This need for increased efficiency has placed compression ignition (CI engines in the forefront compared to spark ignition (SI engines. However, the relatively high emission of oxides of nitrogen (NOx and particulate matter (PM emitted by diesel engines increases their cost and raises environmental barriers that have prevented their widespread use in certain markets. The desire to increase IC engine fuel efficiency while simultaneously meeting emissions mandates has thus motivated considerable research. This paper describes recent progress to improve the fuel efficiency of diesel or CI engines through advanced combustion and fuels research. In particular, a dual fuel engine combustion technology called ―reactivity controlled compression ignition‖ (RCCI, which is a variant of Homogeneous Charge Compression Ignition (HCCI, is highlighted, since it provides more efficient control over the combustion process and has the capability to lower fuel use and pollutant emissions. This paper reviews recent RCCI experiments and computational studies performed on light- and heavy-duty engines, and compares results using conventional and alternative fuels (natural gas, ethanol, and biodiesel with conventional diesel, advanced diesel and HCCI concepts.

  19. Co-Optimization of Fuels and Engines

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, John

    2016-04-11

    The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a new DOE initiative focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development (R&D) are designed to deliver maximum energy savings, emissions reduction, and on-road vehicle performance. The initiative's integrated approach combines the previously independent areas of biofuels and combustion R&D, bringing together two DOE Office of Energy Efficiency & Renewable Energy research offices, ten national laboratories, and numerous industry and academic partners to simultaneously tackle fuel and engine research and development (R&D) to maximize energy savings and on-road vehicle performance while dramatically reducing transportation-related petroleum consumption and greenhouse gas (GHG) emissions. This multi-year project will provide industry with the scientific underpinnings required to move new biofuels and advanced engine systems to market faster while identifying and addressing barriers to their commercialization. This project's ambitious, first-of-its-kind approach simultaneously tackles fuel and engine innovation to co-optimize performance of both elements and provide dramatic and rapid cuts in fuel use and emissions. This presentation provides an overview of the initiative and reviews recent progress focused on both advanced spark-ignition and compression-ignition approaches.

  20. Nonroad developed land in the United States Pacific Northwest for 2001 summarized for NHDPlus v2 catchments

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This spatial data set was created by the U.S. Geological Survey (USGS) to represent the area of non-road developed land within each incremental watershed delineated...

  1. Experimental investigation of the fluid dynamic efficiency of a high performance multi-valve internal combustion engine during the intake phase: Influence of valve-valve interference phenomena

    Directory of Open Access Journals (Sweden)

    Algieri Angelo

    2013-01-01

    Full Text Available The purpose of the present work is the analysis of the fluid dynamic behavior of a high performance internal combustion engine during the intake phase. In particular, a four-valve spark-ignition engine has been characterized at the steady flow rig. Dimensionless discharge coefficients have been used to define the global fluid dynamic efficiency of the intake system, while the Laser Doppler Anemometry (LDA technique has been employed to evaluate the mean flow in the valve curtain area and to characterise the interference phenomena between the two intake valves. The investigation has shown the significant influence of the valve lift on the volumetric efficiency of the intake apparatus. Moreover, the experimental analysis has highlighted that the valve-valve interference phenomena have a relevant impact on the head breathability, on the flow development within the combustion chamber and on the velocity standard deviations.

  2. 40 CFR 91.117 - Certification procedure-service accumulation.

    Science.gov (United States)

    2010-07-01

    ... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and... than recommended lubrication and filter changes, may be performed during service accumulation...

  3. Hige Compression Ratio Turbo Gasoline Engine Operation Using Alcohol Enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Heywood, John [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Jo, Young Suk [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Lewis, Raymond [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Bromberg, Leslie [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Heywood, John [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2016-01-29

    The overall objective of this project was to quantify the potential for improving the performance and efficiency of gasoline engine technology by use of alcohols to suppress knock. Knock-free operation is obtained by direct injection of a second “anti-knock” fuel such as ethanol, which suppresses knock when, with gasoline fuel, knock would occur. Suppressing knock enables increased turbocharging, engine downsizing, and use of higher compression ratios throughout the engine’s operating map. This project combined engine testing and simulation to define knock onset conditions, with different mixtures of gasoline and alcohol, and with this information quantify the potential for improving the efficiency of turbocharged gasoline spark-ignition engines, and the on-vehicle fuel consumption reductions that could then be realized. The more focused objectives of this project were therefore to: Determine engine efficiency with aggressive turbocharging and downsizing and high compression ratio (up to a compression ratio of 13.5:1) over the engine’s operating range; Determine the knock limits of a turbocharged and downsized engine as a function of engine speed and load; Determine the amount of the knock-suppressing alcohol fuel consumed, through the use of various alcohol-gasoline and alcohol-water gasoline blends, for different driving cycles, relative to the gasoline consumed; Determine implications of using alcohol-boosted engines, with their higher efficiency operation, in both light-duty and medium-duty vehicle sectors.

  4. Pocket wheel engine as an internal combustion engine. Taschenscheibenmotor als Verbrennungsmotor

    Energy Technology Data Exchange (ETDEWEB)

    Hellmuth, H.J.

    1990-09-27

    All spark ignition and diesel engines have large oscillating masses, a high frictional resistance and do not run vibration-free. Wankel engines effect only a partial combustion due to the unfavourable shape of the combustion chamber: the expansive force is converted into rotating movement via mechanical deflection. The new internal combustion engine is to have a low weight, require little space and run vibration-free with a high efficiency. The expansive force is to be converted directly into rotating movement. A screw compressor (3) suctions and compresses an air-fuel mixture. The combustion chamber is charged periodically with the compressed mixture via a slit side shaft (6). The slit side shaft (6) closes the combustion chamber (7) at the rear. The mixture is ignited. The flap (8) opens the combustion chamber (7) at the front and the exanding gas sets the pocket wheel connected to the main shaft (15) rotating. The compressor (3) and the slit side shaft (6) are driven directly by the main shaft (15). The pocket wheel engine can be employed in all fields where internal combustion engines have been used until now.

  5. Energy efficient non-road hybrid electric vehicles advanced modeling and control

    CERN Document Server

    Unger, Johannes; Jakubek, Stefan

    2016-01-01

    Analyzing the main problems in the real-time control of parallel hybrid electric powertrains in non-road applications, which work in continuous high dynamic operation, this book gives practical insight in to how to maximize the energetic efficiency and drivability of such powertrains. The book addresses an energy management control structure, which considers all constraints of the physical powertrain and uses novel methodologies for the prediction of the future load requirements to optimize the controller output in terms of an entire work cycle of a non-road vehicle. The load prediction includes a methodology for short term loads as well as for an entire load cycle by means of a cycle detection. A maximization of the energetic efficiency can so be achieved, which is simultaneously a reduction in fuel consumption and exhaust emissions. Readers will gain a deep insight into the necessary topics to be considered in designing an energy and battery management system for non-road vehicles and that only a combinatio...

  6. A Technical Review of Compressed Natural Gas as an Alternative Fuel for Internal Combustion Engines

    Directory of Open Access Journals (Sweden)

    Semin

    2008-01-01

    Full Text Available Natural gas is promising alternative fuel to meet strict engine emission regulations in many countries. Compressed natural gas (CNG has long been used in stationary engines, but the application of CNG as a transport engines fuel has been considerably advanced over the last decade by the development of lightweight high-pressure storage cylinders. Engine conversion technology is well established and suitable conversion equipment is readily available. For spark ignition engines there are two options, a bi-fuel conversion and use a dedicated to CNG engine. For compression ignition engines converted to run on natural gas, there are two main options discussed, there are dual-fuel engines and normal ignition can be initiated. Natural gas engines can operate at lean burn and stoichiometric conditions with different combustion and emission characteristics. In this paper, the CNG engines research and development fueled using CNG are highlighted to keep the output power, torque and emissions of natural gas engines comparable to their gasoline or diesel counterparts. The high activities for future CNG engines research and development to meet future CNG engines is recorded in the paper.

  7. Self-ignition phenomena in DI gasoline engines; Selbstzuendungsphaenomene in Ottomotoren mit Direkteinspritzung

    Energy Technology Data Exchange (ETDEWEB)

    Palaveev, Stefan [MOT Forschungs- und Entwicklungsgesellschaft fuer Motorentechnik, Optik und Thermodynamik mbH, Karlsruhe (Germany); Dahnz, Christoph [Karlsruhe Univ. (DE). Inst. fuer Kolbenmaschinen (IFKM)

    2010-07-01

    With the cost of natural resources rising and environmental awareness increasing, combustion engine manufacturers are focusing their research and development efforts on improving engine efficiency and reduction of exhaust emissions. Engine downsizing is one of the concepts that can reduce the fuel consumption of gasoline engines. Downsizing improves significantly the specific fuel consumption of part-load operating points by shifting them into engine operating map areas with better efficiencies. This is achieved by reducing engine displacement at constant engine speed. In order to obtain the same level of power output, the engines are boosted. However, this high level of power density and thermal loading at full-load operation can cause autoignition of the fuel-air-mixture. In addition to the engine knocking that is typical in spark ignition engines, other sporadic autoignition phenomena take place before the electrical spark breakdown. In the case of premature autoignition heat release starts well before TDC and results in steep rises in both pressure and temperature in the combustion chamber. Such enormous overloads could cause engine failure in a short time. This study aims to provide an overview of the theoretical basics of the autoignition processes at full load engine operation. It also analyzed the impact of some important factors, such as fuel and lubricant properties, mixture formation and injector position. Finally, the study discusses gasoline direct injection as a method to improve thermal efficiency in the context of full-load engine operation. (orig.)

  8. Numerical simulation of charge stratifications to improve combustion and NO formation of lean-burn SI engines

    Institute of Scientific and Technical Information of China (English)

    Zhijun PENG

    2009-01-01

    The influences of charge stratification on spark ignition (SI) engine combustion and NO emission were analyzed using a phenomenological model. The mixture in the cylinder was divided spherically into three parts: a central core with a stoichiometric air-fuel charge, a dilution region without any combustible charge, and a mixing region lying between the core and the dilution region.Three mixture stratification parameters such as the extent of dilution in the mixing region, the extent of combustible charge in the mixing region, and the gradient of stratification in the mixing region were investigated. The results indicate that the extent of combustible charge in the mixing region could reduce in-cylinder NO formation significantly, compared with the extent of dilution in the mixing region. As long as the degree of dilution in the mixing region is within the dilution limit of the combustible charge, the gradient of dilution has little effect on combustion and NO formation.

  9. Propellant Flow Actuated Piezoelectric Rocket Engine Igniter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Under a Phase 1 effort, IES successfully developed and demonstrated a spark ignition concept where propellant flow drives a very simple fluid mechanical oscillator...

  10. Development of an engine system simulation software package - ESIM

    Energy Technology Data Exchange (ETDEWEB)

    Erlandsson, Olof

    2000-10-01

    A software package, ESIM is developed for simulating internal combustion engine systems, including models for engine, manifolds, turbocharger, charge-air cooler (inter cooler) and inlet air heater. This study focus on the thermodynamic treatment and methods used in the models. It also includes some examples of system simulations made with these models for validation purposes. The engine model can be classified as a zero-dimensional, single zone model. It includes calculation of the valve flow process, models for heat release and models for in-cylinder, exhaust port and manifold heat transfer. Models are developed for handling turbocharger performance and charge air cooler characteristics. The main purpose of the project related to this work is to use the ESIM software to study heat balance and performance of homogeneous charge compression ignition (HCCI) engine systems. A short description of the HCCI engine is therefore included, pointing out the difficulties, or challenges regarding the HCCI engine, from a system perspective. However, the relations given here, and the code itself, is quite general, making it possible to use these models to simulate spark ignited, as well as direct injected engines.

  11. SI Engine with repetitive NS spark plug

    Science.gov (United States)

    Pancheshniy, Sergey; Nikipelov, Andrey; Anokhin, Eugeny; Starikovskiy, Andrey; Laplase Team; Mipt Team; Pu Team

    2013-09-01

    Now de-facto the only technology for fuel-air mixtures ignition in IC engines exists. It is a spark discharge of millisecond duration in a short discharge gap. The reason for such a small variety of methods of ignition initiation is very specific conditions of the engine operation. First, it is very high-pressure of fuel-air mixture - from 5-7 atmospheres in old-type engines and up to 40-50 atmospheres on the operating mode of HCCI. Second, it is a very wide range of variation of the oxidizer/fuel ratio in the mixture - from almost stoichiometric (0.8-0.9) at full load to very lean (φ = 0.3-0.5) mixtures at idle and/or economical cruising mode. Third, the high velocity of the gas in the combustion chamber (up to 30-50 m/s) resulting in a rapid compression of swirling inlet flow. The paper presents the results of tests of distributed spark ignition system powered by repetitive pulse nanosecond discharge. Dynamic pressure measurements show the increased pressure and frequency stability for nanosecond excitation in comparison with the standard spark plug. Excitation by single nanosecond high-voltage pulse and short train of pulses was examined. In all regimes the nanosecond pulsed excitation demonstrate a better performance.

  12. Diesel engine technology `98. Status and trends; Dieselmotorentechnik 98. Aktueller Stand und Entwicklungstendenzen

    Energy Technology Data Exchange (ETDEWEB)

    Essers, U. [ed.] [Stuttgart Univ. (Germany)

    1998-09-01

    This book reviews important aspects of modern diesel engines. Renowned university scientists and competent experts from the car and components industry present trends in diesel engineering. The current state of the art is outlined, and the potential and solutions for future requirements are outlined. Contents: Direct injection in diesel engines - radial piston injection pumps for modern diesel engines in passenger cars - common rail injection - electronic control of diesel engines - supercharging of diesel engines - direct-injection diesel engines with supercharger - aldehyde emissions of diesel engines - exhaust regulations for industrial vehicles - combustion diagnosis in diesel engines - soot formation - direct-injection diesel engines and spark ignition engines - trends in passenger car development. (orig.) [Deutsch] Der Band beleuchtet wichtige Aspekte der modernen Dieselmotoren. Namhafte Wissenschaftler von verschiedenen Hochschulen und kompetente Fachexperten aus der Fahrzeug- und Zubehoerindustrie berichten ueber Entwicklungstendenzen auf dem Gebiet der Dieselmotorentechnik. Der aktuelle Stand der Entwicklung wird aufgezeigt. Potential und Loesungsansaetze fuer kuenftige Anforderungen werden diskutiert. Inhalt: Direkteinspritzung bei Dieselmotoren - Radialkolben-Verteilereinspritzpumpen fuer moderne Pkw-DI-Dieselmotoren - Common Rail-Einspritzung - Elektronische Dieselregelung - Aufladung von Dieselmotoren - Pkw-DI-Dieselmotor mit VTG-Lader - Aldehydemission von Dieselmotoren - Abgasgesetzgebung fuer Nfz-Dieselmotoren - Verbrennungsdiagnostik im Dieselmotor - Russbildung - DI-Dieselmotor und DI-Ottomotor - Wohin geht die PkW-Motorentwicklung? (orig.)

  13. Determination of combustion parameters using engine crankshaft speed

    Science.gov (United States)

    Taglialatela, F.; Lavorgna, M.; Mancaruso, E.; Vaglieco, B. M.

    2013-07-01

    Electronic engine controls based on real time diagnosis of combustion process can significantly help in complying with the stricter and stricter regulations on pollutants emissions and fuel consumption. The most important parameter for the evaluation of combustion quality in internal combustion engines is the in-cylinder pressure, but its direct measurement is very expensive and involves an intrusive approach to the cylinder. Previous researches demonstrated the direct relationship existing between in-cylinder pressure and engine crankshaft speed and several authors tried to reconstruct the pressure cycle on the basis of the engine speed signal. In this paper we propose the use of a Multi-Layer Perceptron neural network to model the relationship between the engine crankshaft speed and some parameters derived from the in-cylinder pressure cycle. This allows to have a non-intrusive estimation of cylinder pressure and a real time evaluation of combustion quality. The structure of the model and the training procedure is outlined in the paper. A possible combustion controller using the information extracted from the crankshaft speed information is also proposed. The application of the neural network model is demonstrated on a single-cylinder spark ignition engine tested in a wide range of speeds and loads. Results confirm that a good estimation of some combustion pressure parameters can be obtained by means of a suitable processing of crankshaft speed signal.

  14. Trends of Syngas as a Fuel in Internal Combustion Engines

    Directory of Open Access Journals (Sweden)

    Ftwi Yohaness Hagos

    2014-01-01

    Full Text Available Syngas from biomass and solid waste is a carbon-neutral fuel believed to be a promising fuel for future engines. It was widely used for spark-ignition engines in the WWII era before being replaced with gasoline. In this paper, the technological development, success, and challenges for application of syngas in power generating plants, the trends of engine technologies, and the potential of this fuel in the current engine technology are highlighted. Products of gasification vary with the variation of input parameters. Therefore, three different syngases selected from the two major gasification product categories are used as case studies. Their fuel properties are compared to those of CNG and hydrogen and the effects on the performance and emissions are studied. Syngases have very low stoichiometric air-fuel ratio; as a result they are not suitable for stoichiometric application. Besides, syngases have higher laminar flame speed as compared to CNG. Therefore, stratification under lean operation should be used in order to keep their performance and emissions of NOx comparable to CNG counterpart. However, late injection stratification leads to injection duration limitation leading to restriction of output power and torque. Therefore, proper optimization of major engine variables should be done in the current engine technology.

  15. Engineering

    National Research Council Canada - National Science Library

    Includes papers in the following fields: Aerospace Engineering, Agricultural Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Environmental Engineering, Industrial Engineering, Materials Engineering, Mechanical...

  16. Characterization of Flow Bench Engine Testing

    Science.gov (United States)

    Voris, Alex; Riley, Lauren; Puzinauskas, Paul

    2015-11-01

    This project was an attempt at characterizing particle image velocimetry (PIV) and swirl-meter test procedures. The flow direction and PIV seeding were evaluated for in-cylinder steady state flow of a spark ignition engine. For PIV seeding, both wet and dry options were tested. The dry particles tested were baby powder, glass particulate, and titanium dioxide. The wet particles tested were fogs created with olive oil, vegetable oil, DEHS, and silicon oil. The seeding was evaluated at 0.1 and 0.25 Lift/Diameter and at cylinder pressures of 10, 25 and 40 inches of H2O. PIV results were evaluated through visual and fluid momentum comparisons. Seeding particles were also evaluated based on particle size and cost. It was found that baby powder and glass particulate were the most effective seeding options for the current setup. The oil fogs and titanium dioxide were found to deposit very quickly on the mock cylinder and obscure the motion of the particles. Based on initial calculations and flow measurements, the flow direction should have a negligible impact on PIV and swirl-meter results. The characterizations found in this project will be used in future engine research examining the effects of intake port geometry on in-cylinder fluid motion and exhaust gas recirculation tolerances. Thanks to NSF site grant #1358991.

  17. Management of auxiliary aggregates - development and testing of methods for improved use of auxiliary aggregates of diesel and spark ignition engines in stationary and unstationary operation. Final report; Nebenaggregate-Management - Entwicklung und Erprobung von Verfahren zum verbesserten Einsatz der Nebenaggregate an Diesel- und Ottomotoren bei stationaerem und instationaerem Betrieb. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, M.; Lenzen, B.; Groef, S.; Isermann, R. [Technische Univ. Darmstadt (Germany). Inst. fuer Regelungstechnik; Hohenberg, G. [Technische Univ. Darmstadt (Germany). Fachgebiet Verbrennungskraftmaschinen

    1998-07-01

    Aggregate management is aimed at aggregate operation in consideration of demand, consumption and exhaust. Demands on reliability are high. Investigations were made using modelling, simulation, model reduction and identification, with the focus on model reduction. The resulting concepts for consumption reduction vary depending on the vehicle type and application. [German] Das Nebenaggregate-Management hat den bedarfs-, verbrauchs- und abgasorientierten Betrieb der Nebenaggregate im Kraftfahrzeug zum Ziel. Der sehr weit gespannte Einsatzbereich von Kraftfahrzeugen und die hohen Anforderungen an die Betriebszuverlaessigkeit stellen entsprechende Anforderungen an das Management. Zur Untersuchung eines verbesserten Betriebs von Nebenaggregaten wrden Verfahren der Regelungstechnik wie z.B. Modellbildung, Simulation, Modellreduktion und Identifikation eingesetzt, wobei der Modellreduktion in anbetracht des komplexen Gesamtsystems Kraftfahrzeug eine besondere Bedeutung zukommt. Ergebnisse der Untersuchungen sind Konzepte zur Verringerung des Verbrauchsanteils der Nebenaggregate, die je nach Fahrzeugtyp und Einsatzzweck variieren. (orig.)

  18. Experimental investigation of Methanol blends with gasoline on SI engine

    Directory of Open Access Journals (Sweden)

    Gaurav tiwari

    2014-10-01

    Full Text Available Automobile have become a very important part of our modern life style. And it runs on fossil fuel. But the excessive use of fossil fuels will very soon leads to the energy crises so the future of automobile based on fossil fuels has been badly affected by two major problems. That is less availability of fuel and environmental degradation. So it is very important to found some new renewable non polluting alternative fuels to ensure the proper and safe survival of internal combustion engines. In present study we evaluate the performance of two stroke single cylinder spark ignition engine with ratio of 10%, 20% and 30% of methanol and gasoline by volume. Performance parameters (brake thermal efficiency, brake specific energy consumption and brake specific fuel consumption were determined at various loads on engine with methanol blended gasoline. The comparison was made on performance of conventional SI engine with pure gasoline operation. As a result, brake thermal efficiency and brake specific fuel consumption showed improved performance when compared with pure gasoline performances.

  19. Comparison of the steady-state and transient engine performance in case of electronic carburetor control and central fuel injection. Vergleich von elektronisch geregeltem Vergaser und Zentraleinspritzung hinsichtlich des stationaeren und instationaeren Motorbetriebsverhaltens

    Energy Technology Data Exchange (ETDEWEB)

    Smetana, G.

    1989-01-01

    Modern passenger cars with spark ignition engines are commonly equipped with lambda catalysts and air-ratio controlled mixing systems in order to meet the present and future exhaust regulations. Centrally controlled mixing systems today are either carburetors with electronic control or intermittent central injection systems. In the framework of this study, these two mixing systems were investigated in fundamental studies and practical tests with regard to their quality of atomisation, mixing in the suction tube, and accuracy of fuel dosage in transient phase operation. The investigations lasted several years. In view of the experimental findings, its simple design and variable control options, the technology of intermittent central injection should be preferred to the electronic carburetor in spite of some shortcomings. (orig.) With 71 figs.

  20. Development and exploitation of optical diagnoses based on radicals fluorescence. Application to automotive engines; Developpement et exploitation de diagnostics optiques bases sur la fluorescence de radicaux. Application aux moteurs automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Auge, M.

    2005-12-15

    During this PhD, we have developed an optical technique based on radicals fluorescence. The objective was to obtain more information on combustion phenomena. We first have applied the OH and HCHO PLIF technique simultaneously in laminar premixed counter-flow flames under pressure. With this technique, we have obtained the local heat release rate of the flame and an estimation of the laminar flame speed and the thickness of the flame for different fuels and pressure. We have then applied this technique on a Diesel fuel jet in combustion placed in a high pressure cell to understand the different phenomena occurring. Then PLIF at 355 nm was applied in direct and indirect injection spark ignition engine to detect the unburned. We have demonstrated the high potential of the technique used during this PhD to obtain local heat release rate of a flame. We have also progressed in our comprehension of the phenomena occurring during the combustion processes. (author)

  1. Modeling of hybrid vehicle fuel economy and fuel engine efficiency

    Science.gov (United States)

    Wu, Wei

    "Near-CV" (i.e., near-conventional vehicle) hybrid vehicles, with an internal combustion engine, and a supplementary storage with low-weight, low-energy but high-power capacity, are analyzed. This design avoids the shortcoming of the "near-EV" and the "dual-mode" hybrid vehicles that need a large energy storage system (in terms of energy capacity and weight). The small storage is used to optimize engine energy management and can provide power when needed. The energy advantage of the "near-CV" design is to reduce reliance on the engine at low power, to enable regenerative braking, and to provide good performance with a small engine. The fuel consumption of internal combustion engines, which might be applied to hybrid vehicles, is analyzed by building simple analytical models that reflect the engines' energy loss characteristics. Both diesel and gasoline engines are modeled. The simple analytical models describe engine fuel consumption at any speed and load point by describing the engine's indicated efficiency and friction. The engine's indicated efficiency and heat loss are described in terms of several easy-to-obtain engine parameters, e.g., compression ratio, displacement, bore and stroke. Engine friction is described in terms of parameters obtained by fitting available fuel measurements on several diesel and spark-ignition engines. The engine models developed are shown to conform closely to experimental fuel consumption and motored friction data. A model of the energy use of "near-CV" hybrid vehicles with different storage mechanism is created, based on simple algebraic description of the components. With powertrain downsizing and hybridization, a "near-CV" hybrid vehicle can obtain a factor of approximately two in overall fuel efficiency (mpg) improvement, without considering reductions in the vehicle load.

  2. Effect of Engine Speed on In-Cylinder Tumble Flows in a Motored Internal Combustion Engine - An Experimental Investigation Using Particle Image Velocimetry

    Directory of Open Access Journals (Sweden)

    B. Murali Krishna

    2011-01-01

    Full Text Available Now-a-days, the stratified and direct injection spark ignition engines are becoming very popular because of their low fuel consumption and exhaust emissions. But, the challenges to them are the formation and control of the charge which is mainly dependent on the in-cylinder fluid flows. Today, an optical tool like particle image velocimetry (PIV is extensively used for the in-cylinder fluid flow measurements. This paper deals with the experimental investigations of the in-cylinder fluid tumble flows in a motored internal combustion engine with a flat piston at different engine speeds during intake and compression strokes using PIV. The two-dimensional in-cylinder flow measurements and analysis of tumble flows have been carried out in the combustion space on a vertical plane at the cylinder axis. To analyze the fluid flows, ensemble average velocity vectors have been used. To characterize the tumble flow, tumble ratio has been estimated. From the results, it is found that the tumble ratio mainly varies with crank angle positions. At the end of compression stroke, maximum turbulent kinetic energy is more at higher engine speeds. Present study will be very useful in understanding the effect of engine speeds on the in-cylinder fluid tumble flows under real engine conditions.

  3. Performance and combustion characteristics of a direct injection SI hydrogen engine

    Energy Technology Data Exchange (ETDEWEB)

    Mohammadi, Ali [Engine Technology, Powertrain, Toyota Motor Europe, Technical centre Hoge Wei 33 Zaventem 1930 (Belgium); Shioji, Masahiro; Nakai, Yasuyuki; Ishikura, Wataru [Graduate School of Energy Science, Kyoto University, Yoshida-honmachi Sakyo-ku Kyoto 605-8501 (Japan); Tabo, Eizo [Environmental and Technical Affairs Department, Mitsubishi Motors Co., 5-33-8 Shiba Minatoku Tokyo 108-8401 (Japan)

    2007-02-15

    Hydrogen with low spark-energy requirement, wide flammability range and high burning velocity is an important candidate for being used as fuel in spark-ignition engines. It also offers CO{sub 2} and HC free combustion and lean operation resulting in lower NO{sub x} emissions. However, well examined external mixing of hydrogen with intake air causes backfire and knock especially at higher engine loads. In addition, low heating value per unit of volume of hydrogen limits the maximum output power. In this study, attention was paid to full usage of hydrogen advantage employing internal mixing method. Hydrogen was directly injected into cylinder of a single-cylinder test engine using a high-pressure gas injector and effects of injection timing and spark timing on engine performance and NO{sub x} emission were investigated under wide engine loads. The results indicate that direct injection of hydrogen prevents backfire, and that high thermal efficiency and output power can be achieved by hydrogen injection during late compression stroke. Moreover, by further optimization of the injection timing for each engine load, NO{sub x} emission can be reduced under the high engine output conditions. (author)

  4. Knock detection system to improve petrol engine performance, using microphone sensor

    Science.gov (United States)

    Sujono, Agus; Santoso, Budi; Juwana, Wibawa Endra

    2017-01-01

    An increase of power and efficiency of spark ignition engines (petrol engines) are always faced with the problem of knock. Even the characteristics of the engine itself are always determined from the occurrence of knock. Until today, this knocking problem has not been solved completely. Knock is caused by principal factors that are influenced by the engine rotation, the load or opening the throttle and spark advance (ignition timing). In this research, the engine is mounted on the engine test bed (ETB) which is equipped with the necessary sensors. Knock detection using a new method, which is based on pattern recognition, which through the knock sound detection by using a microphone sensor, active filter, the regression of the normalized envelope function, and the calculation of the Euclidean distance is used for identifying knock. This system is implemented with a microcontroller which uses fuzzy logic controller ignition (FLIC), which aims to set proper spark advance, in accordance with operating conditions. This system can improve the engine performance for approximately 15%.

  5. 78 FR 724 - California State Nonroad Engine Pollution Control Standards; Off-Highway Recreational Vehicles...

    Science.gov (United States)

    2013-01-04

    ... vehicles. Second, the amendments reclassified sand cars, off-road utility vehicles and off-road sport... standard, (2) a within-the- scope determination for the reclassification of sand cars, off-road sport... standards will be, in the aggregate, at least as protective of public health and welfare as applicable...

  6. 78 FR 58089 - California State Nonroad Engine Pollution Control Standards; Off-Road Compression Ignition...

    Science.gov (United States)

    2013-09-20

    ... authorization of the Fleet Requirements as amended in 2010. The legal framework for this decision stems from the... considered under section 209(e)(2)(A). \\8\\ See, e.g., Motor and Equip. Mfrs Assoc. v. EPA, 627 F.2d 1095 (D.C...

  7. 76 FR 5586 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Mobile Cargo...

    Science.gov (United States)

    2011-02-01

    ... Equipment). CARB's Mobile Cargo Handling Equipment requirements are designed to use best available control... Alexander at (202) 343-9540, to learn if a hearing will be held or may check the following webpage for an... restricted by statute. EPA's Office of Transportation and Air Quality also maintains a webpage that...

  8. 78 FR 36369 - Heavy-Duty Engine and Vehicle, and Nonroad Technical Amendments

    Science.gov (United States)

    2013-06-17

    ...\\ See 49 CFR 553.21. \\4\\ Optical character recognition (OCR) is the process of converting an image of... that the documents submitted be scanned using the Optical Character Recognition (OCR) process, thus... benefits of the standards achieved during this critical initial phase of the program by providing the...

  9. 76 FR 77521 - California State Nonroad Engine Pollution Control Standards; Commercial Harbor Craft Regulations...

    Science.gov (United States)

    2011-12-13

    ... strategy (DECS) determined by CARB to be the greatest feasible reduction of NO X or PM. For in-use harbor..., push boats, and multipurpose harbor craft. Those harbor craft are required to meet emission limits... owners and operators may opt to meet requirements by implementing alternative emission control strategies...

  10. 77 FR 72851 - California State Nonroad Engine Pollution Control Standards; Portable Equipment Registration...

    Science.gov (United States)

    2012-12-06

    ....regulations.gov or in hard copy at the Air and Radiation Docket in the EPA Headquarters Library, EPA West... will give appropriate consideration to safety factors (including the potential increased risk of burn... proof must take account of the nature of the risk of error involved in any given decision, and...

  11. 40 CFR 89.603 - General requirements for importation of nonconforming nonroad engines.

    Science.gov (United States)

    2010-07-01

    ... that pollutant applicable to the OP year for the appropriate power category. (3) ICIs may not generate... model year, except as allowed by paragraph (e)(5) of this section. For ICIs owned by a parent...

  12. 78 FR 38970 - California State Nonroad Engine Pollution Control Standards; Within-the-Scope Determination for...

    Science.gov (United States)

    2013-06-28

    ... Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities... Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and... Amendments to California's ``Airborne Toxic Control Measure for In-Use Diesel-Fueled Transport Refrigeration...

  13. 40 CFR 91.423 - Exhaust gas analytical system; CVS grab sample.

    Science.gov (United States)

    2010-07-01

    ...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test... CVS grab “bag” samples from spark-ignition engines. Since various configurations can produce accurate..., valves, solenoids, pumps and switches may be used to provide additional information and coordinate...

  14. Development and test of a new concept for biomass producer gas engines

    Energy Technology Data Exchange (ETDEWEB)

    Ahrenfeldt, J.; Vendelbo Foged, E.; Strand, R.; Birk Henriksen, U.

    2010-02-15

    The technical requirements and the economical assessment of converting commercial diesel engine gen-sets into high compression spark ignition operation on biomass producer gas have been investigated. Assessments showed that for a 200 kW{sub e} gen-set there would be a financial benefit of approximately 600.000 DKK corresponding to a reduction of 60% in investment costs compared to the price of a conventional gas engine gen-set. Experimental investigations have been conducted on two identical small scale SI gas engine gen-sets operating on biomass producer gas from thermal gasification of wood. The engines were operated with two different compression ratios, one with the original compression ratio for natural gas operation 9.5:1, and the second with a compression ratio of 18.5:1 (converted diesel engine). It was shown that high compression ratio SI engine operation was possible when operating on this specific biomass producer gas. The results showed an increase in the electrical efficiency from 30% to 34% when the compression ratio was increased. (author)

  15. An assessment of CFD-based wall heat transfer models in piston engines

    Energy Technology Data Exchange (ETDEWEB)

    Sircar, Arpan [Pennsylvania State Univ., University Park, PA (United States); Paul, Chandan [Pennsylvania State Univ., University Park, PA (United States); Ferreyro-Fernandez, Sebastian [Pennsylvania State Univ., University Park, PA (United States); Imren, Abdurrahman [Pennsylvania State Univ., University Park, PA (United States); Haworth, Daniel C [Pennsylvania State Univ., University Park, PA (United States)

    2017-04-26

    The lack of accurate submodels for in-cylinder heat transfer has been identified as a key shortcoming in developing truly predictive, physics-based computational fluid dynamics (CFD) models that can be used to develop combustion systems for advanced high-efficiency, low-emissions engines. Only recently have experimental methods become available that enable accurate near-wall measurements to enhance simulation capability via advancing models. Initial results show crank-angle dependent discrepancies with respect to previously used boundary-layer models of up to 100%. However, available experimental data is quite sparse (only few data points on engine walls) and limited (available measurements are those of heat flux only). Predictive submodels are needed for medium-resolution ("engineering") LES and for unsteady Reynolds-averaged simulations (URANS). Recently, some research groups have performed DNS studies on engine-relevant conditions using simple geometries. These provide very useful data for benchmarking wall heat transfer models under such conditions. Further, a number of new and more sophisticated models have also become available in the literature which account for these engine-like conditions. Some of these have been incorporated while others of a more complex nature, which include solving additional partial differential equations (PDEs) within the thin boundary layer near the wall, are underway. These models will then be tested against the available DNS/experimental data in both SI (spark-ignition) and CI (compression-ignition) engines.

  16. REAL TIME FUEL INJECTION IN SI ENGINE USING ELECTRONIC INSTRUMENTATION

    Directory of Open Access Journals (Sweden)

    V. VINOTH KUMAR, M.E

    2012-05-01

    Full Text Available To meet the present stringent emission norms. These systems are enerally termed as Electronic Fuel Injection (EFI systems. The fuel is injected into the throttle body or into the inlet manifold through an electronic fuel injector, which is controlled by an Electronic Control Unit (ECU. The quantity of fuel injected by the injector plays a vital role as far as performance and emission characteristics of spark ignition engines are concerned. This paper deals with the static and dynamic fuel injection characteristics of two gasoline fuelinjectors. The effect of different injection parameters like fuel injection pressure, injection duration, supply voltage to injector and engine speed on the quantity of fuel injected have been studied for two injectors. The injection dead time and its variation with respect to fuel pressure and supply voltage to injector have beenanalyzed. Based on the analysis of results, an empirical formula has been obtained to determine the dynamic fuel injection quantity from the static fuel injection characteristics and it was compared with the measured values. It is found that the empirical formula developed in this work gives reasonably good results and therefore, it can be used with confidence for predicting the dynamic characteristics of any given injector from its static injection characteristics.

  17. Performance of CO2 enrich CNG in direct injection engine

    Science.gov (United States)

    Firmansyah, W. B.; Ayandotun, E. Z.; Zainal, A.; Aziz, A. R. A.; Heika, M. R.

    2015-12-01

    This paper investigates the potential of utilizing the undeveloped natural gas fields in Malaysia with high carbon dioxide (CO2) content ranging from 28% to 87%. For this experiment, various CO2 proportions by volume were added to pure natural gas as a way of simulating raw natural gas compositions in these fields. The experimental tests were carried out using a 4-stroke single cylinder spark ignition (SI) direct injection (DI) compressed natural gas (CNG) engine. The tests were carried out at 180° and 300° before top dead centre (BTDC) injection timing at 3000 rpm, to establish the effects on the engine performance. The results show that CO2 is suppressing the combustion of CNG while on the other hand CNG combustion is causing CO2 dissociation shown by decreasing CO2 emission with the increase in CO2 content. Results for 180° BTDC injection timing shows higher performance compared to 300° BTDC because of two possible reasons, higher volumetric efficiency and higher stratification level. The results also showed the possibility of increasing the CO2 content by injection strategy.

  18. Controlled auto ignition of gasoline engines; Steuerung der ottomotorischen Selbstzuendung

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, Christina

    2011-07-01

    Controlled Auto Ignition allows for significant efficiency gains in combination with extremely low NO{sub x} emissions and particulate matters when compared to conventional spark ignited combustion concepts. The limiting factors for controlled auto ignition are the temperature at very low loads and the pressure gradient at higher loads. Based on experiments on a single cylinder engine with fully variable valve actuators and gasoline direct injection, the contribution under consideration reports on main parameters to control the controlled auto ignition. Detailed analyses demonstrate the impact of each parameter on self-ignition and combustion. Additionally, different methods to expand the operating range of controlled auto ignition are discussed with regard to the achievable efficiency and the required effort. One important result of this contribution is a feed-forward control which coordinates the main actuating parameters and ensures the desired combustion phasing even in dynamic mode. A regression model is developed which uses the input variables air/fuel ratio, start of injection, engine speed and fuel mass to predict the combustion phasing and the indicated mean effective pressure. Inverting this model leads to the final feed-forward control which allows to separate the effects of start of injection and exhaust valve closing. In that case exhaust valve closing controls the air/fuel ratio, while start of injection corrects the lasting deviation in combustion phasing. Using the actual air/fuel ratio as an additional input parameter ensures the required combustion phasing even in dynamic mode.

  19. A statistical combustion phase control approach of SI engines

    Science.gov (United States)

    Gao, Jinwu; Wu, Yuhu; Shen, Tielong

    2017-02-01

    In order to maximize the performance of internal combustion engine, combustion phase is usually controlled to track its desired reference. However, suffering from the cyclic variability of combustion, it is difficulty but meaningful to control mean of combustion phase and constrain its variance. As a combustion phase indicator, the location of peak pressure (LPP) is utilized for real-time combustion phase control in this research. The purpose of the proposed method is to ensure the mean of LPP statistically tracks its reference and constrains the standard deviation of LPP distribution. To achieve this, LPP is first calculated based on the cylinder pressure sensor, and its characteristics are analyzed at the steady-state operating condition, then the distribution of LPP is examined online using hypothesis test criterion. On the basis of the presented statistical algorithm, current mean of LPP is applied in the feedback channel for designing spark advance adjustment law, and the stability of closed-loop system is theoretically ensured according to a steady statistical model. Finally, the proposed strategy is verified on a spark ignition gasoline engine.

  20. Impact of the injection dose of exhaust gases, on work parameters of combustion engine

    Science.gov (United States)

    Marek, W.; Śliwiński, K.

    2016-09-01

    This article is another one from the series in which were presented research results indicated the possible areas of application of the pneumatic injection using hot combustion gases proposed by Professor Jarnuszkiewicz. This publication present the results of the control system of exhaust gas recirculation. The main aim of this research was to determine the effect of exhaust gas recirculation to the operating parameters of the internal combustion engine on the basis of laboratory measurements. All measurements were performed at a constant engine speed. These conditions correspond to the operation of the motor operating an electrical generator. The study was conducted on the four-stroke two-cylinder engine with spark ignition. The study were specifically tested on the air injection system and therefore the selection of the rotational speed was not bound, as in conventional versions of operating parameters of the electrical machine. During the measurement there were applied criterion which used power control corresponding to the requirements of load power, at minimal values of engine speed. Recirculation value determined by the following recurrent position control valve of the injection doses inflator gas for pneumatic injection system. They were studied and recorded, the impact of dose of gases recirculation to the operating and ecological engine parameters such as power, torque, specific fuel consumption, efficiency, air fuel ratio, exhaust gas temperature and nitrogen oxides and hydrocarbons.

  1. EVOLUTION OF DEEP BED FILTRATION OF ENGINE EXHAUST PARTICULATES WITH TRAPPED MASS.

    Energy Technology Data Exchange (ETDEWEB)

    Viswanathan, Sandeep; Rothamer, David; Foster, David E.; Fansler, Todd D.; Zelenyuk, Alla; Stewart, Mark L.; Bell, David M.

    2017-08-01

    Micro-scale filtration experiments were performed on cordierite filter samples using particulate matter (PM) generated by a spark-ignition direct-injection (SIDI) engine fueled with tier II EEE certification gasoline. Size-resolved mass and number concentrations were obtained from several engine operating conditions. The resultant mass-mobility relationships showed weak dependence on the operating condition. An integrated particle size distribution (IPSD) method was used estimate the PM mass concentration in the exhaust stream from the SIDI engine and a heavy duty diesel (HDD) engine. The average estimated mass concentration between all conditions was ∼77****** % of the gravimetric measurements performed on Teflon filters. Despite the relatively low elemental carbon fraction (∼0.4 to 0.7), the IPSD mass for stoichiometric SIDI exhaust was ∼83±38 % of the gravimetric measurement. Identical cordierite filter samples with properties representative of diesel particulate filters were sequentially loaded with PM from the different SIDI engine operating conditions, in order of increasing PM mass concentration. Simultaneous particle size distribution measurements upstream and downstream of the filter sample were used to evaluate filter performance evolution and the instantaneous trapped mass within the filter for two different filter face velocities. The evolution of filtration performance for the different samples was sensitive only to trapped mass, despite using PM from a wide range of operating conditions. Higher filtration velocity resulted in a more rapid shift in the most penetrating particle size towards smaller mobility diameters.

  2. Investigation of ecological parameters of four-stroke SI engine, with pneumatic fuel injection system

    Science.gov (United States)

    Marek, W.; Śliwiński, K.

    2016-09-01

    The publication presents the results of tests to determine the impact of using waste fuels, alcohol, to power the engine, on the ecological parameters of the combustion engine. Alternatively fuelled with a mixture of iso- and n-butanol, indicated with "X" and "END, and gasoline and a mixture of fuel and alcohol. The object of the study was a four-stroke engine with spark ignition designed to work with a generator. Motor power was held by the modified system of pneumatic injection using hot exhaust gases developed by Prof. Stanislaw Jarnuszkiewicz, controlled by modern mechatronic systems. Tests were conducted at a constant speed for the intended use of the engine. The subject of the research was to determine the control parameters such as ignition timing, mixture composition and the degree of exhaust gas recirculation on the ecological parameters of the engine. Tests were carried out using partially quality power control. In summary we present the findings of this phase of the study.

  3. An internal combustion engine with interconnected multicylinder arrangement. Verbrennungsmotor mit Mehrzylinderverbund

    Energy Technology Data Exchange (ETDEWEB)

    Mosdell, R.

    1990-08-02

    The invention is dedicated to the kinematic characteristics of multicylinder/multichamber internal combustion engine crank mechanisms and intends to reduce internal energy losses due to mass inertia during combustion energy (impulse) transmission to the piston, connecting rod and crankshaft. This reduction is achieved by modifying the gas exchange control of conventional four-cycle or two-cycle diesel engines, four-cycle or two-cycle spark ignition engines or four-cycle Wankel engines. The ususal successive ignition order of individual cylinders according to the number of cylinders on the crankshaft is replaced by an arrangement of several interconnected cylinders which ignite simultaneously or time-delayed, thus increasing the combustion energy (impulse) and reducing the mass inertia of the piston, connecting rod, crankshaft, disk flywheel and drive components by division. Especially the Wankel engine is expected to profit by the invention's design because of the relatively high mass inertia of all its movable transmission elements and because of higher instantaneous combustion impulses due to doubling, which account for an unproportionately high performance increase.

  4. Modification and tuning of diesel bus engine for biogas electricity production

    Directory of Open Access Journals (Sweden)

    Sittiboon Siripornakarachai

    2007-11-01

    Full Text Available This study is to convert and tune a bus diesel engine for electricity production in a farm using biogas as fuel. The engine under study is a Hino K-13CTI 13,000 cc 24 valve turbocharged engine coupled to a 3 phase 4 pole induction motor to produce electricity at 50 Hz. Modifications include an addition of biogas carburetor for air-fuel mixing, replacing the fuel injection system with spark ignition system, reduction of compression ratio from the original 16:1 to 8:1 using a cylinder head spacer, and modification of the turbocharger waste gate so the boost pressure can be adjusted. When the induction motor is synchronized to the power grid, the running speed of the engine is 1,500 rpm. Optimal engine efficiency was achieved at 28.6% by setting the lambda factor at 1.097, ignition timing at 54o before top dead center, and the turbocharger boost at 56 kPa. With this setting, the generator power output is 134.20 kilowatt with emission of CO and NOX being 1,154 and 896 ppm respectively.

  5. Potential of Atkinson cycle combined with EGR for pollutant control in a HD diesel engine

    Energy Technology Data Exchange (ETDEWEB)

    Benajes, J.; Serrano, J.R.; Molina, S.; Novella, R. [CMT-Motores Termicos, Universidad Politecnica de Valencia, Camino de Vera s/n, 46022 Valencia (Spain)

    2009-01-15

    An experimental investigation has been performed on the potential of the Atkinson cycle and reducing intake oxygen concentration for pollutant control in a heavy-duty diesel engine. In this study the Atkinson cycle has been reproduced advancing the intake valve closing angle towards the intake stroke. In addition, the intake oxygen concentration has been reduced introducing exhaust gas recirculation. This research has been carried out at low engine load (25%), where the Atkinson cycle is known to improve the efficiency of the spark-ignition engines. The main interest of this investigation has been the comparison between the Atkinson cycle and the conventional diesel cycle at the same oxygen concentration in the intake gas. This analysis has been focused on in-cylinder gas thermodynamic conditions, combustion process, exhaust emissions and engine efficiency. In compression ignition engines, the Atkinson cycle basically promotes the premixed combustion, but in the range of these tests, a complete premixed combustion was not attained. Regarding exhaust emissions, the Atkinson cycle reduces notably the nitrous oxides but increases soot emissions. Finally, better global results have been found reducing intake oxygen concentration by the recirculation of exhaust gas than by the operation of an Atkinson cycle. (author)

  6. Energy Optimization and Fuel Economy Investigation of a Series Hybrid Electric Vehicle Integrated with Diesel/RCCI Engines

    Directory of Open Access Journals (Sweden)

    Ali Solouk

    2016-12-01

    Full Text Available Among different types of low temperature combustion (LTC regimes, eactively controlled compression ignition (RCCI has received a lot of attention as a promising advanced combustion engine technology with high indicated thermal efficiency and low nitrogen oxides ( NO x and particulate matter (PM emissions. In this study, an RCCI engine for the purpose of fuel economy investigation is incorporated in series hybrid electric vehicle (SHEV architecture, which allows the engine to run completely in the narrow RCCI mode for common driving cycles. Three different types of energy management control (EMC strategies are designed and implemented to achieve the best fuel economy. The EMC strategies encompass rule-based control (RBC, offline, and online optimal controllers, including dynamic programing (DP and model predictive control (MPC, respectively. The simulation results show a 13.1% to 14.2% fuel economy saving by using an RCCI engine over a modern spark ignition (SI engine in SHEV for different driving cycles. This fuel economy saving is reduced to 3% in comparison with a modern compression ignition (CI engine, while NO x emissions are significantly lower. Simulation results show that the RCCI engine offers more fuel economy improvement in more aggressive driving cycles (e.g., US06, compared to less aggressive driving cycles (e.g., UDDS. In addition, the MPC results show that sub-optimal fuel economy is achieved by predicting the vehicle speed profile for a time horizon of 70 s.

  7. Experimental study of hydrogen as a fuel additive in internal combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Saanum, Inge

    2008-07-01

    Combustion of hydrocarbons in internal combustion engines results in emissions that can be harmful both to human health and to the environment. Although the engine technology is improving, the emissions of NO{sub x}, PM and UHC are still challenging. Besides, the overall consumption of fossil fuel and hence the emissions of CO{sub 2} are increasing because of the increasing number of vehicles. This has lead to a focus on finding alternative fuels and alternative technologies that may result in lower emissions of harmful gases and lower CO{sub 2} emissions. This thesis treats various topics that are relevant when using blends of fuels in different internal combustion engine technologies, with a particular focus on using hydrogen as a fuel additive. The topics addressed are especially the ones that impact the environment, such as emissions of harmful gases and thermal efficiency (fuel consumption). The thesis is based on experimental work performed at four different test rigs: 1. A dynamic combustion rig with optical access to the combustion chamber where spark ignited premixed combustion could be studied by means of a Schlieren optical setup and a high speed video camera. 2. A spark ignition natural gas engine rig with an optional exhaust gas recycling system. 3. A 1-cylinder diesel engine prepared for homogeneous charge compression ignition combustion. 4. A 6-cylinder standard diesel engine The engine rigs were equipped with cylinder pressure sensors, engine dynamometers, exhaust gas analyzers etc. to enable analyses of the effects of different fuels. The effect of hydrogen blended with methane and natural gas in spark ignited premixed combustion was investigated in the dynamic combustion rig and in a natural gas engine. In the dynamic combustion rig, the effect of hydrogen added to methane on the flame speed and the flame structure was investigated at elevated pressure and temperature. A considerable increase in the flame speed was observed when adding 30 vol

  8. Experimental study of hydrogen as a fuel additive in internal combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Saanum, Inge

    2008-07-01

    Combustion of hydrocarbons in internal combustion engines results in emissions that can be harmful both to human health and to the environment. Although the engine technology is improving, the emissions of NO{sub x}, PM and UHC are still challenging. Besides, the overall consumption of fossil fuel and hence the emissions of CO{sub 2} are increasing because of the increasing number of vehicles. This has lead to a focus on finding alternative fuels and alternative technologies that may result in lower emissions of harmful gases and lower CO{sub 2} emissions. This thesis treats various topics that are relevant when using blends of fuels in different internal combustion engine technologies, with a particular focus on using hydrogen as a fuel additive. The topics addressed are especially the ones that impact the environment, such as emissions of harmful gases and thermal efficiency (fuel consumption). The thesis is based on experimental work performed at four different test rigs: 1. A dynamic combustion rig with optical access to the combustion chamber where spark ignited premixed combustion could be studied by means of a Schlieren optical setup and a high speed video camera. 2. A spark ignition natural gas engine rig with an optional exhaust gas recycling system. 3. A 1-cylinder diesel engine prepared for homogeneous charge compression ignition combustion. 4. A 6-cylinder standard diesel engine The engine rigs were equipped with cylinder pressure sensors, engine dynamometers, exhaust gas analyzers etc. to enable analyses of the effects of different fuels. The effect of hydrogen blended with methane and natural gas in spark ignited premixed combustion was investigated in the dynamic combustion rig and in a natural gas engine. In the dynamic combustion rig, the effect of hydrogen added to methane on the flame speed and the flame structure was investigated at elevated pressure and temperature. A considerable increase in the flame speed was observed when adding 30 vol

  9. LPG gaseous phase electronic port injection on performance, emission and combustion characteristics of Lean Burn SI Engine

    Science.gov (United States)

    Bhasker J, Pradeep; E, Porpatham

    2016-08-01

    Gaseous fuels have always been established as an assuring way to lessen emissions in Spark Ignition engines. In particular, LPG resolved to be an affirmative fuel for SI engines because of their efficient combustion properties, lower emissions and higher knock resistance. This paper investigates performance, emission and combustion characteristics of a microcontroller based electronic LPG gaseous phase port injection system. Experiments were carried out in a single cylinder diesel engine altered to behave as SI engine with LPG as fuel at a compression ratio of 10.5:1. The engine was regulated at 1500 rpm at a throttle position of 20% at diverse equivalence ratios. The test results were compared with that of the carburetion system. The results showed that there was an increase in brake power output and brake thermal efficiency with LPG gas phase injection. There was an appreciable extension in the lean limit of operation and maximum brake power output under lean conditions. LPG injection technique significantly reduces hydrocarbon and carbon monoxide emissions. Also, it extremely enhances the rate of combustion and helps in extending the lean limit of LPG. There was a minimal increase of NOx emissions over the lean operating range due to higher temperature. On the whole it is concluded that port injection of LPG is best suitable in terms of performance and emission for LPG fuelled lean burn SI engine.

  10. An experiment study of homogeneous charge compression ignition combustion and emission in a gasoline engine

    Directory of Open Access Journals (Sweden)

    Zhang Jianyong

    2014-01-01

    Full Text Available Homogenous charge compression ignition (HCCI technology has exhibited high potential to reduce fuel consumption and NOx emissions over normal spark ignition engines significantly. Optimized kinetic process (OKP technology is implemented to realize HCCI combustion in a port fuel injection gasoline engine. The combustion and emission characteristics are investigated with variation of intake air temperature, exhaust gas recirculation (EGR rate and intake air pressure. The results show that intake air temperature has great influence on HCCI combustion characteristic. Increased intake air temperature results in advance combustion phase, shorten combustion duration, and lower indicated mean effective pressure (IMEP. Increased EGR rate retards combustion start phase and prolongs combustion duration, while maximum pressure rising rate and NOx emission are reduced with increase of EGR rate. In the condition with constant fuel flow quantity, increased air pressure leads to retarded combustion phase and lower pressure rising rate, which will reduce the engine knocking tendency. In the condition with constant air fuel ratio condition, fuel injection quantity increases as intake air pressure increases, which lead to high heat release rate and high emission level. The optimal intake air temperature varies in different operating area, which can be tuned from ambient temperature to 220℃ by heat management system. The combination of EGR and air boost technology could expand operating area of HCCI engine, which improve indicated mean effective pressure from maximum 510kPa to 720kPa.

  11. IMPROVED INTAKE MANIFOLD DESIGN FOR I.C. ENGINE EMISSION CONTROL

    Directory of Open Access Journals (Sweden)

    R. K. TYAGI

    2015-09-01

    Full Text Available The Spark Ignition engine has been extensively used in multifaceted sectors, viz. Automobiles, Industry engineering, etc. due to their exceptional driveability, performance and minimal maintenance. However, gasoline engines have their share of complications as they release a variety of air pollutants, viz. CO, NOx, HC and CO2 etc. and other harmful emissions. In this paper a comparison of these gases with the Government policies or norms have been studied and the parameters which are responsible for increasing the more Air pollution have been minimised using innovative engineering solutions. This paper depicts research done on inlet manifolds and their modifications to achieve exemplary fuel-air swirl. During subsequent analysis at idle condition (1300 rpm, it has been concluded that the venturi-based intake manifold has shown remarkable results in decreasing the HC levels from 180 ppm to 60 ppm (66.6 % at Idle Range. The work is also complementary to the various other designs of inlet manifolds, viz. Inlet manifold Modified 1 and Inlet Manifold Modified 2 out of which it is concluded that the Inlet manifold Modified 2 results in better reduction of pollutants.

  12. Intermediate Alcohol-Gasoline Blends, Fuels for Enabling Increased Engine Efficiency and Powertrain Possibilities

    Energy Technology Data Exchange (ETDEWEB)

    Splitter, Derek A [ORNL; Szybist, James P [ORNL

    2014-01-01

    The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form and in mid-level alcohol-gasoline blends with 24% vol./vol. iso-butanol-gasoline (IB24) and 30% vol./vol. ethanol-gasoline (E30). A single-cylinder research engine is used with a low and high compression ratio of 9.2:1 and 11.85:1 respectively. The engine is equipped with hydraulically actuated valves, laboratory intake air, and is capable of external exhaust gas recirculation (EGR). All fuels are operated to full-load conditions with =1, using both 0% and 15% external cooled EGR. The results demonstrate that higher octane number bio-fuels better utilize higher compression ratios with high stoichiometric torque capability. Specifically, the unique properties of ethanol enabled a doubling of the stoichiometric torque capability with the 11.85:1 compression ratio using E30 as compared to 87 AKI, up to 20 bar IMEPg at =1 (with 15% EGR, 18.5 bar with 0% EGR). EGR was shown to provide thermodynamic advantages with all fuels. The results demonstrate that E30 may further the downsizing and downspeeding of engines by achieving increased low speed torque, even with high compression ratios. The results suggest that at mid-level alcohol-gasoline blends, engine and vehicle optimization can offset the reduced fuel energy content of alcohol-gasoline blends, and likely reduce vehicle fuel consumption and tailpipe CO2 emissions.

  13. Three-dimensional modeling of diesel engine intake flow, combustion and emissions

    Science.gov (United States)

    Reitz, R. D.; Rutland, C. J.

    1992-01-01

    A three-dimensional computer code (KIVA) is being modified to include state-of-the-art submodels for diesel engine flow and combustion: spray atomization, drop breakup/coalescence, multi-component fuel vaporization, spray/wall interaction, ignition and combustion, wall heat transfer, unburned HC and NOx formation, soot and radiation, and the intake flow process. Improved and/or new submodels which were completed are: wall heat transfer with unsteadiness and compressibility, laminar-turbulent characteristic time combustion with unburned HC and Zeldo'vich NOx, and spray/wall impingement with rebounding and sliding drops. Results to date show that adding the effects of unsteadiness and compressibility improves the accuracy of heat transfer predictions; spray drop rebound can occur from walls at low impingement velocities (e.g., in cold-starting); larger spray drops are formed at the nozzle due to the influence of vaporization on the atomization process; a laminar-and-turbulent characteristic time combustion model has the flexibility to match measured engine combustion data over a wide range of operating conditions; and finally, the characteristic time combustion model can also be extended to allow predictions of ignition. The accuracy of the predictions is being assessed by comparisons with available measurements. Additional supporting experiments are also described briefly. To date, comparisons with measured engine cylinder pressure and heat flux data were made for homogeneous charge, spark-ignited and compression-ignited engines. The model results are in good agreement with the experiments.

  14. Co-Optimization of Fuels and Engines (Co-Optima) -- Introduction

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, John T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wagner, Robert [Oak Ridge National Laboratory; Holladay, John [Pacific Northwest National Laboratory

    2017-08-11

    The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a U.S. Department of Energy (DOE) effort funded by both the Vehicle and Bioenergy Technology Offices. The overall goal of the effort is to identify the combinations of fuel properties and engine characteristics that maximize efficiency, independent of production pathway or fuel composition, and accelerate commercialization of these technologies. Multiple research efforts are underway focused on both spark-ignition and compression-ignition strategies applicable across the entire light, medium, and heavy-duty fleet. A key objective of Co-Optima's research is to identify new blendstocks that enhance current petroleum blending components, increase blendstock diversity, and provide refiners with increased flexibility to blend fuels with the key properties required to optimize advanced internal combustion engines. In addition to fuels and engines R&D, the initiative is guided by analyses assessing the near-term commercial feasibility of new blendstocks based on economics, environmental performance, compatibility, and large-scale production viability. This talk will provide an overview of the Co-Optima effort.

  15. Internal combustion engine with thermochemical recuperation fed by ethanol steam reforming products - feasibility study

    Science.gov (United States)

    Cesana, O.; Gutman, M.; Shapiro, M.; Tartakovsky, L.

    2016-08-01

    This research analyses the performance of a spark ignition engine fueled by ethanol steam reforming products. The basic concept involves the use of the internal combustion engine's (ICE) waste heat to promote onboard reforming of ethanol. The reformer and the engine performance were simulated and analyzed using GT-Suite, Chem CAD and Matlab software. The engine performance with different compositions of ethanol reforming products was analyzed, in order to find the optimal working conditions of the ICE - reformer system. The analysis performed demonstrated the capability to sustain the endothermic reactions in the reformer and to reform the liquid ethanol to hydrogen-rich gaseous fuel using the heat of the exhaust gases. However, the required reformer's size is quite large: 39 x 89 x 73 cm, which makes a feasibility of its mounting on board a vehicle questionable. A comparison with ICE fed by gasoline or liquid ethanol doesn't show a potential of efficiency improvement, but can be considered as a tool of additional emissions reduction.

  16. IMPROVEMENT TO PIPELINE COMPRESSOR ENGINE RELIABILITY THROUGH RETROFIT MICRO-PILOT IGNITION SYSTEM-PHASE I

    Energy Technology Data Exchange (ETDEWEB)

    Ted Bestor

    2003-03-04

    This report documents the first year's effort towards a 3-year program to develop micropilot ignition systems for existing pipeline compressor engines. In essence, all Phase I goals and objectives were met. We intend to proceed with the Phase II research plan, as set forth by the applicable Research Management Plan. The objective for Phase I was to demonstrate the feasibility of micropilot ignition for large bore, slow speed engines operating at low compression ratios. The primary elements of Micropilot Phase I were to develop a single-cylinder test chamber to study the injection of pilot fuel into a combustion cylinder and to develop, install and test a multi-cylinder micropilot ignition system for a 4-cylinder, natural gas test engine. In all, there were twelve (12) tasks defined and executed to support these two (2) primarily elements in a stepwise fashion. Task-specific approaches and results are documented in this report. Research activities for Micropilot Phase I were conducted with the understanding that the efforts are expected to result in a commercial product to capture and disseminate the efficiency and environmental benefits of this new technology. An extensive state-of-art review was conducted to leverage the existing body of knowledge of micropilot ignition with respect to retrofit applications. Additionally, commercially-available fuel injection products were identified and applied to the program where appropriate. This approach will minimize the overall time-to-market requirements, while meeting performance and cost criteria. The four-cylinder prototype data was encouraging for the micro-pilot ignition technology when compared to spark ignition. Initial testing results showed: (1) Brake specific fuel consumption of natural gas was improved from standard spark ignition across the map, 1% at full load and 5% at 70% load. (2) 0% misfires for all points on micropilot ignition. Fuel savings were most likely due to this percent misfire improvement

  17. Green Engines Development Using Compressed Natural Gas as an Alternative Fuel: A Review

    Directory of Open Access Journals (Sweden)

    Semin

    2009-01-01

    Full Text Available Problem statement: The Compressed Natural Gas (CNG is a gaseous form of natural gas, it have been recognized as one of the promising alternative fuel due to its substantial benefits compared to gasoline and diesel. Natural gas is produced from gas wells or tied in with crude oil production. Approach: Natural gas is promising alternative fuel to meet strict engine emission regulations in many countries. Compressed Natural Gas (CNG has long been used in stationary engines, but the application of CNG as a transport engines fuel has been considerably advanced over the last decade by the development of lightweight high-pressure storage cylinders. Results: The technology of engine conversion was well established and suitable conversion equipment is readily available. For petrol engines or spark ignition engines there are two options, a bi-fuel conversion and use a dedicated to CNG engine. The diesel engines converted or designed to run on natural gas, there were two main options discussed. There are dual-fuel engines and normal ignition can be initiated. Natural gas engines can be operated at lean burn and stoichiometric conditions with different combustion and emission characteristics. Conclusions: In this study, the low exhaust gas emissions of CNG engines research and development were highlighted. Stoichiometric natural gas engines were briefly reviewed. To keep the output power, torque and emissions of natural gas engines comparable to their gasoline or diesel counterparts. High activity for future green CNG engines research and development to meet future stringent emissions standards was recorded in the study.

  18. Driving and engine cycles

    CERN Document Server

    Giakoumis, Evangelos G

    2017-01-01

    This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.

  19. Fuel consumption of gasoline ethanol blends at different engine rotational

    Directory of Open Access Journals (Sweden)

    Y. Barakat

    2016-09-01

    Full Text Available Fuel consumption (mf kg/h was estimated for two hydrocarbon gasolines (BG1-OE and BG2-OE and their ethanol blends which contain from 4 to 20 vol.% of ethanol. Fuel consumption experiments for sixteen fuel samples (5 L each, were conducted on a four cylinder, four stroke spark ignition test vehicle Sahin car, Type 1.45, model 2001. The engine has a swept volume of 1400 c.c., a compression ratio of 8.3:1 and a maximum power of 78 HP at 5500 rpm. The obtained data reveal that the relation between fuel consumption and ethanol concentration is linear. Six linear equations for BG1-ethanol blends and BG2-ethanol ones at the investigated rotational speeds, were developed. Fuel consumption values of the first set of gasoline-ethanol blends are lower than that of the second set. This may be attributed to the difference in the chemical composition of base gasolines BG1 in the first set which is enriched in the less volatile reformate if compared with the second set which is more enriched in isomerate, the more volatile refinery stream.

  20. Oxides of nitrogen measurement at exhaust gases of combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Prietsch, W.; Alter, C.; Naumann, M.

    1975-01-01

    Chemical and physical methods available for the determination of nitrogen oxides were tested and compared with respect to their suitability for spark-ignition and diesel engine exhaust oxides of nitrogen analysis. Of all methods tested (Saltzmans method, phenoldisulfonic acid method, as well as non-dispersive infrared, ultraviolet absorption, and chemiluminescence methods), the chemiluminescence method was best for the determination of the total nitrogen oxides concentration in vehicle exhaust, even though the nitrogen dioxide conversion is still problematic, and the NO/sub 2/ concentrations lie within the dispersion limits of the nitric oxide analyzer. Measurement of NO is possible by the NDIR method provided the cross-sensitivity for water is simultaneously measured, and adequate correction is used. The Saltzman method is preferable to the phenoldisulfonic acid method under stationary analytical conditions due to its simplicity and reliability. For a concentration range of 100 to 1000 ppM, a Saltzman factor of 0.72 is best for exhaust nitrogen oxides analysis.

  1. The Effect of Injection Timings on Performance and Emissions of Compressed Natural-Gas Direct Injection Engine

    Directory of Open Access Journals (Sweden)

    Saad Aljamali

    2016-01-01

    Full Text Available This experimental part investigates the effect of injection timing on performance and emissions of homogenous mixture compressed natural-gas direct injection. The engine of 1.6 L capacity, 4 cylinders, spark ignition, and compression ratio of 14 was used. Performance and emission were recorded under wide-open throttle using an engine control system (Rotronics and the portable exhaust gas analyser (Kane. The engine was tested at speed ranging from 1500 revolutions per minute (RPM to 4000 RPM with 500 RPM increments. The engine control unit (ECU was modified using Motec 800. The injection timings investigated were at the end of injection (EOI 120 bTDC, 180 bTDC, 300 bTDC, and 360 bTDC. Results show high brake power, torque, and BMEP with 120 as compared with the other injection timings. At 4000 RPM the power, torque, and BMEP with 120 were 5% compared to that with 180. Furthermore, it shows low BSFC and high fuel conversion efficiency with 120. With 360, the engine produced less CO and CO2 at higher speeds.

  2. Study of NOx Emissions of S.I. Engine Fueled with Different Kinds of Hydrocarbon Fuels and Hydrogen

    Directory of Open Access Journals (Sweden)

    Qahtan A. Abass

    2010-01-01

    Full Text Available Liquefied petroleum gas (LPG, Natural gas (NG and hydrogen were used to operate spark ignition internal combustion engine Ricardo E6, to compare NOx emissions emitted from the engine, with that emitted from engine fueled with gasoline as a fuel.The study was done when engine operated at HUCR for gasoline, compared with its operation at HUCR for each fuel. Compression ratio, equivalence ratio and spark timing were studied at constant speed 25rps.The results appeared that NOx concentrations will be at maximum value in the lean side near the stoichiometric ratio, and reduced with moving away from this ratio for mixture at both sides, these concentrations were at its highest value when hydrogen used at CR=8:1, and got near to each other for the three hydrocarbon fuels used in the study, when the engine operated at HUCR for each fuel, but still hydrogen had maximum value, the main variable affect these concentrations was spark timing

  3. Main conditions and effectiveness of gas fuel use for powering of dual fuel IC self-ignition engine

    Directory of Open Access Journals (Sweden)

    Stefan POSTRZEDNIK

    2015-09-01

    Full Text Available Internal combustion engines are fuelled mostly with liquid fuels (gasoline, diesel. Nowadays the gaseous fuels are applied as driving fuel of combustion engines. In case of spark ignition engines the liquid fuel (petrol can be totally replaced by the gas fuels. This possibility in case of compression engines is essentially restricted through the higher self-ignition temperatures of the combustible gases in comparison to classical diesel oil. Solution if this problem can be achieved by using of the dual fuel system, where for ignition of the prepared fuel gas - air mixture a specified amount of the liquid fuel (diesel oil should be additionally injected into the combustion chamber. For assurance that the combustion process proceeds without mistakes and completely, some basic conditions should be satisfied. In the frame of this work, three main aspects of this problem are taken into account: a. filling efficiency of the engine, b. stoichiometry of the combustion, c. performance of mechanical parameters (torque, power. A complex analysis of these conditions has been done and some achieved important results are presented in the paper.

  4. Performance and emission characteristics of the thermal barrier coated SI engine by adding argon inert gas to intake mixture

    Directory of Open Access Journals (Sweden)

    T. Karthikeya Sharma

    2015-11-01

    Full Text Available Dilution of the intake air of the SI engine with the inert gases is one of the emission control techniques like exhaust gas recirculation, water injection into combustion chamber and cyclic variability, without scarifying power output and/or thermal efficiency (TE. This paper investigates the effects of using argon (Ar gas to mitigate the spark ignition engine intake air to enhance the performance and cut down the emissions mainly nitrogen oxides. The input variables of this study include the compression ratio, stroke length, and engine speed and argon concentration. Output parameters like TE, volumetric efficiency, heat release rates, brake power, exhaust gas temperature and emissions of NOx, CO2 and CO were studied in a thermal barrier coated SI engine, under variable argon concentrations. Results of this study showed that the inclusion of Argon to the input air of the thermal barrier coated SI engine has significantly improved the emission characteristics and engine’s performance within the range studied.

  5. An investigation of using various diesel-type fuels in homogeneous charge compression ignition engines and their effects on operational and controlling issues

    Energy Technology Data Exchange (ETDEWEB)

    Milovanovic, N.; Chen, R. [Loughborough Univ., Aeronautical and Automotive Dept., Loughborough (United Kingdom); Dowden, R. [Swansea Inst. of Higher Education, School of Automotive Engineering, Swansea (United Kingdom); Turner, J. [Lotus Engineering, Powertrain Research Dept., Hethel (United Kingdom)

    2004-12-01

    Homogeneous charge compression ignition (HCCI) engines appear to be a future alternative to diesel and spark-ignited engines. The HCCI engine has the potential to deliver high efficiency and very low NO{sub x} and particulate matter emissions. There are, however, problems with the control of ignition and heat release range over the entire load and speed range which limits the practical application of this technology. The aim of this paper is to analyse the use of different types of diesel fuels in an HCCI engine and hence to find the most suitable with respect to operational and control issues. The single-zone combustion model with convective heat transfer loss is used to simulate the HCCI engine environment. n-Heptane, dimethyl ether and bio-diesel (methyl butanoate and methyl formate) fuels are investigated. Methyl butanoate and methyl formate represent surrogates of heavy and light bio-diesel fuel respectively. The effects of different engine parameters such as equivalence ratio and engine speed on the ignition timing are investigated. The use of internal exhaust gas recirculation is investigated as a potential strategy for controlling the ignition timing. The results indicate that the use of bio-diesel fuels will result in lower sensitivity of ignition timing to changes in operational parameters and in a better control of the ignition process when compared with the use of n-heptane and dimethyl ether. (Author)

  6. Photothermal Deoxygenation of Graphene Oxide for Distributed Ignition and Patterning Applications (Postprint)

    Science.gov (United States)

    2010-01-01

    and in high efficiency homogenous charge compression ignition ( HCCI ) engines , where ignition control is of paramount importance. 15. SUBJECT TERMS... HCCI ) engine that combines the high efficiency of a diesel engine with the low emissions of a spark ignition engine . In a typical HCCI engine , fuel... engine .[40] The high compression ratio of HCCI engines provides an efficiency increase of up to 15% over traditional spark ignition engines .[41,42

  7. TCC-III Engine Benchmark for Large-Eddy Simulation of IC Engine Flows

    Directory of Open Access Journals (Sweden)

    Schiffmann P.

    2016-01-01

    Full Text Available A collaborative effort is described to benchmark the TCC-III engine, and to illustrate the application of this data for the evaluation of sub-grid scale models and valve simulation details on the fidelity of Large-Eddy Simulations (LES. The TCC-III is a spark ignition 4-stroke 2-valve engine with a flat head and piston and is equipped with a full quartz liner for maximum optical access that allows high-speed flow measurements with Particle Image Velocimetry (PIV; the TCC-III has new valve seats and a modified intake-system compared to previous configurations. This work is an extension of a previous study at an engine speed of 800 RPM and an intake manifold pressure (MAP of 95 kPa, where a one-equation eddy viscosity LES model yielded accurate qualitative and quantitative predictions of ensemble averaged mean and RMS velocities during the intake and compression stroke. Here, experimental data were acquired with parametric variation of engine speed and intake manifold absolute pressure to assess the capability of LES models over a range of operating conditions of practical relevance. This paper focuses on the repeatability and accuracy of the measured PIV data, acquired at 1 300 RPM, at two different MAP (95 kPa and 40 kPa, and imaged at multiple data planes and crank angles. Two examples are provided, illustrating the application of this data to LES model development. In one example, the experimental data are used to distinguish between the efficacies of a one-equation eddy viscosity model versus a dynamic structure one-equation model for the sub-grid stresses. The second example addresses the effects of numerical intake-valve opening strategy and local mesh refinement in the valve curtain.

  8. Emissions from Petrol Engine Fueled Gasoline–Ethanol–Methanol (GEM Ternary mixture as Alternative Fuel

    Directory of Open Access Journals (Sweden)

    Thangavelu Saravana Kannan

    2015-01-01

    Full Text Available The increasing demands of petroleum fuels due to the rapid development automotive society coupled with the environmental pollution issues have inspired the efforts on exploring alternative fuels for internal combustion engines. Bioethanol obtained from biomass and bioenergy crops has been proclaimed as one of the feasible alternative to gasoline. In this study, the effect of gasoline–ethanol–methanol (GEM ternary blend on the emission characteristics of petrol engine was studied. Three different fuel blends, namely, E0 (gasoline, G75E21M4 (75% gasoline, 21% hydrous ethanol and 4% methanol and E25 (25% anhydrous ethanol and 75% gasoline were tested in a 1.3-l K3-VE spark-ignition engine. The results indicate that, when G75E21M4 fuel blend was used, a significant drop in CO, CO2, NOx and HC emissions by about 42%, 15%, 7% and 5.2% compared to E0, respectively. Moreover, the emission results for G75E21M4 are marginally lower than E25 whereas; HC emission was slightly higher than E25.

  9. 77 FR 72846 - California State Nonroad Engine Pollution Control Standards; In-Use Portable Diesel Engines 50...

    Science.gov (United States)

    2012-12-06

    ... cancer, chronic bronchitis, asthma and fewer hospital visits caused by pneumonia and asthma-related... authority ``shall take effect after such period as the Administrator finds necessary to permit the... the technology before the standards go into effect. The latter scenario also requires...

  10. Effects of Biofuel and Variant Ambient Pressure on FlameDevelopment and Emissions of Gasoline Engine.

    Science.gov (United States)

    Hashim, Akasha; Khalid, Amir; Sapit, Azwan; Samsudin, Dahrum

    2016-11-01

    There are many technologies about exhaust emissions reduction for wide variety of spark ignition (SI) engine have been considered as the improvement throughout the combustion process. The stricter on legislation of emission and demands of lower fuel consumption needs to be priority in order to satisfy the demand of emission quality. Besides, alternative fuel such as methanol-gasoline blends is used as working fluid in this study due to its higher octane number and self-sustain concept which capable to contribute positive effect to the combustion process. The purpose of this study is to investigate the effects of methanol-gasoline fuel with different blending ratio and variant ambient pressures on flame development and emission for gasoline engine. An experimental study is carried towards to the flame development of methanol-gasoline fuel in a constant volume chamber. Schlieren optical visualization technique is a visual process that used when high sensitivity is required to photograph the flow of fluids of varying density used for captured the combustion images in the constant volume chamber and analysed through image processing technique. Apart from that, the result showed combustion burn rate increased when the percentage of methanol content in gasoline increased. Thus, high percentage of methanol-gasoline blends gave greater flame development area. Moreover, the emissions of CO, NOX and HC are performed a reduction when the percentage of methanol content in gasoline is increased. Contrarily, the emission of Carbon dioxide, CO2 is increased due to the combustion process is enhanced.

  11. Lean-Burn Cogeneration Biogas Engine with Unscavenged Combustion Prechamber: Comparison with Natural Gas

    Directory of Open Access Journals (Sweden)

    Roger Röthlisberger

    2002-12-01

    Full Text Available Gaseous fuels produced, for example, by waste or agricultural by-products fermentation (biogas can be burned in-situ by cogeneration systems like spark-ignition internal combustion engines. However, the more and more stringent legislation for exhaust gas emissions requires improvement of the combustion process particularly when catalytic after treatment is not reliable as in the case of sewage or landfill biogas. The system proposed in this paper is the use of an unscavenged combustion prechamber instead of direct ignition on a turbocharged 6 cylinder 150 kW gas engine. This prechamber is used for operation with a simulated biogas (40% CO2 in natural gas. The results show that, compared to natural gas operation for the same rated power output of 150 kW and the same NOx emissions, the CO emissions are reduced by 15% and the HC emissions at least by 8%. Efficiencies higher than 36% are achieved which is very promising and the lower CO emissions give a margin to consider an increase of compression ratio.

  12. Natural gas engines; An eco-friendly alternative for buses, communal and distribution vehicles. Erdgasmotoren; Eine umweltfreundliche Alternative fuer Busse, Kommunal- und Verteilerfahrzeuge

    Energy Technology Data Exchange (ETDEWEB)

    Signer, M. (Iveco Motorenforschung AG, Arbon (Switzerland))

    1994-01-01

    Natural gas engines for buses, communal and distribution vehicles are an eco-friendly alternative. The exhaust emission values are distinctly lower than the Euro 2-Limit Values for 1995/1996 and lower than the discussed Euro 3 limits. As a result of the change to spark ignition and the reduced engine efficiency obtained, the natural gas engines consume 20 and more per cent energy. The CO[sub 2] emission are, however, comparable with those of a diesel engine. The vehicle fuel tanks are voluminous and heavy. Compromises must be made for the installation in vehicles which results in a reduction of the payload. Cost-favourable and lighter tanks would increase the attractivity of such vehicles. The natural gas vehicle is, at least today, dependent on a central refueling system (compressor station) at the vehicle operator or in his nearer neighbourhood. For the general and flexible operation of any type of utility vehicle, the diesel engine is and remains the optimum solution in view of ecology and economy. (orig.)

  13. Estimation of the in-cylinder air/fuel ratio of an internal combustion engine by the use of pressure sensors

    Energy Technology Data Exchange (ETDEWEB)

    Tunestaal, Per

    2000-03-01

    This thesis investigates the use of cylinder pressure measurements for estimation of the in-cylinder air/fuel ratio in a spark ignited internal combustion engine. An estimation model which uses the net heat release profile for estimating the cylinder air/fuel ratio of a spark ignition engine is developed. The net heat release profile is computed from the cylinder pressure trace and quantifies the conversion of chemical energy of the reactants in the charge into thermal energy. The net heat release profile does not take heat- or mass transfer into account. Cycle-averaged air/fuel ratio estimates over a range of engine speeds and loads show an RMS error of 4.1% compared to measurements in the exhaust. A thermochemical model of the combustion process in an internal combustion engine is developed. It uses a simple chemical combustion reaction, polynominal fits of internal energy as function of temperature, and the first law of thermodynamics to derive a relationship between measured cylinder pressure and the progress of the combustion process. Simplifying assumptions are made to arrive at an equation which relates the net heat release to the cylinder pressure. Two methods for estimating the sensor offset of a cylinder pressure transducer are developed. Both methods fit the pressure data during the pre-combustion phase of the compression stroke to a polytropic curve. The first method assumes a known polytropic exponent, and the other estimates the polytropic exponent. The first method results in a linear least-squares problem, and the second method results in a nonlinear least-squares problem. The nonlinear least-squares problem is solved by separating out the nonlinear dependence and solving the single-variable minimization problem. For this, a finite difference Newton method is derived. Using this method, the cost of solving the nonlinear least-squares problem is only slightly higher than solving the linear least-squares problem. Both methods show good statistical

  14. Spark Ignition of Combustible Vapor in a Plastic Bottle as a Demonstration of Rocket Propulsion

    Science.gov (United States)

    Mattox, J. R.

    2017-01-01

    I report an innovation that provides a compelling demonstration of rocket propulsion, appropriate for students of physics and other physical sciences. An electrical spark is initiated from a distance to cause the deflagration of a combustible vapor mixed with air in a lightweight plastic bottle that is consequently propelled as a rocket by the release of combustion products, i.e., a "whoosh rocket." My recommendation is that the standard fuel for pedagogical whoosh demonstrations be isopropanol, and the recommended vessel is the 3.8-L high-density polyethylene (HDPE) bottle.

  15. 75 FR 32611 - Standards of Performance for Stationary Compression Ignition and Spark Ignition Internal...

    Science.gov (United States)

    2010-06-08

    ... island areas that are not required to use lower sulfur fuel, while EPA believes that SCR can be installed... different density and viscosity, make it difficult to achieve similar results from SCR as would occur with... located in remote areas of Alaska to petition the Administrator to use any fuels mixed with used oil...

  16. Spark Ignition of Combustible Vapor in a Plastic Bottle as a Demonstration of Rocket Propulsion

    Science.gov (United States)

    Mattox, J. R.

    2017-01-01

    I report an innovation that provides a compelling demonstration of rocket propulsion, appropriate for students of physics and other physical sciences. An electrical spark is initiated from a distance to cause the deflagration of a combustible vapor mixed with air in a lightweight plastic bottle that is consequently propelled as a rocket by the…

  17. 40 CFR Appendix II to Part 1048 - Large Spark-ignition (SI) Composite Transient Cycle

    Science.gov (United States)

    2010-07-01

    ... 10 928 95 9 929 95 7 930 95 7 931 96 7 932 96 6 933 96 6 934 95 6 935 90 6 936 69 43 937 76 62 938 93... 93 14 1010 93 15 1011 93 16 1012 93 17 1013 93 20 1014 93 22 1015 93 20 1016 93 19 1017 93 20 1018...

  18. 76 FR 37953 - Standards of Performance for Stationary Compression Ignition and Spark Ignition Internal...

    Science.gov (United States)

    2011-06-28

    ... 2030. DATES: This final rule is effective on August 29, 2011. ADDRESSES: The EPA has established a... Governments G. Executive Order 13045: Protection of Children From Environmental Health and Safety Risks H..., or Use I. National Technology Transfer and Advancement Act J. Executive Order 12898: Federal Actions...

  19. The influence of beam energy, mode and focal length on the control of laser ignition in an internal combustion engine

    Science.gov (United States)

    Mullett, J. D.; Dodd, R.; Williams, C. J.; Triantos, G.; Dearden, G.; Shenton, A. T.; Watkins, K. G.; Carroll, S. D.; Scarisbrick, A. D.; Keen, S.

    2007-08-01

    This work involves a study on laser ignition (LI) in an internal combustion (IC) engine and investigates the effects on control of engine combustion performance and stability of varying specific laser parameters (beam energy, beam quality, minimum beam waist size, focal point volume and focal length). A Q-switched Nd : YAG laser operating at the fundamental wavelength 1064 nm was successfully used to ignite homogeneous stoichiometric gasoline and air mixtures in one cylinder of a 1.6 litre IC test engine, where the remaining three cylinders used conventional electrical spark ignition (SI). A direct comparison between LI and conventional SI is presented in terms of changes in coefficient of variability in indicated mean effective pressure (COVIMEP) and the variance in the peak cylinder pressure position (VarPPP). The laser was individually operated in three different modes by changing the diameter of the cavity aperture, where the results show that for specific parameters, LI performed better than SI in terms of combustion performance and stability. Minimum ignition energies for misfire free combustion ranging from 4 to 28 mJ were obtained for various optical and laser configurations and were compared with the equivalent minimum optical breakdown energies in air.

  20. Spatially Resolved Experimental and Numerical Investigation of the Flow through the Intake Port of an Internal Combustion Engine

    Directory of Open Access Journals (Sweden)

    Hartmann Frank

    2016-01-01

    Full Text Available Modern spark-ignited internal combustion engines have intake ports designed to introduce high levels of so-called “tumble” charge motion. Correspondingly high shear rates can lead to high fluctuations and turbulence within the combustion chamber. A suitable test case to characterize the intake flow is a steady-state flow bench. Although routinely used in the engine development process to determine the global discharge coefficients, only a few detailed numerical and experimental studies use this test case to analyze the flow in the vicinity of the valve with high spatial and temporal resolution. In this paper, we combined highly resolved two-dimensional, two-component Particle Image Velocimetry (PIV measurements and numerical simulations using a Detached-Eddy Simulation (DES model to characterize engine-relevant flow features on a flow bench. The spatial resolution of numerical simulations on two different grids is assessed and compared to that of the PIV measurement. The results of simulations and experiment are then compared in terms of their mean and fluctuation velocity fields and the jet orientation. A detailed study of the area around the valve seats investigates the validity of wall functions in this region. Finally, we examine structures induced by vortex-shedding at the valve stem and if they are transported into the combustion chamber.

  1. The railplug: Development of a new ignitor for internal combustion engines. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Matthews, R.D.; Nichols, S.P.; Weldon, W.F.

    1994-11-29

    A three year investigation of a new type of ignitor for internal combustion engines has been performed using funds from the Advanced Energy Projects Program of The Basic Energy Sciences Division of the U.S. Department of Energy and with matching funding from Research Applications, Inc. This project was a spin-off of {open_quotes}Star Wars{close_quotes} defense technology, specifically the railgun. The {open_quotes}railplug{close_quotes} is a miniaturized railgun which produces a high velocity plume of plasma that is injected into the combustion chamber of an engine. Unlike other types of alternative ignitors, such as plasma jet ignitors, electromagnetic forces enhance the acceleration of the plasma generated by a railplug. Thus, for a railplug, the combined effects of electromagnetic and thermodynamic forces drive the plasma into the combustion chamber. Several engine operating conditions or configurations can be identified that traditionally present ignition problems, and might benefit from enhanced ignition systems. One of these is ultra-lean combustion in spark ignition (SI) engines. This concept has the potential for lowering emissions of NOx while simultaneously improving thermal efficiency. Unfortunately, current lean burn engines cannot be operated sufficiently lean before ignition related problems are encountered to offer any benefits. High EGR engines have similar potential for emissions improvement, but also experience similar ignition problems, particularly at idle. Other potential applications include diesel cold start, alcohol and dual fuel engines, and high altitude relight of gas turbines. The railplug may find application for any of the above. This project focused on three of these potential applications: lean burn SI engines, high EGR SI engines, and diesel cold start.

  2. The railplug: Development of a new ignitor for internal combustion engines

    Science.gov (United States)

    Matthews, R. D.; Nichols, S. P.; Weldon, W. F.

    1994-11-01

    A three year investigation of a new type of ignitor for internal combustion engines has been performed using funds from the Advanced Energy Projects Program of The Basic Energy Sciences Division of the U.S. Department of Energy and with matching funding from Research Applications, Inc. This project was a spin-off of 'Star Wars' defense technology, specifically the railgun. The 'railplug' is a miniaturized railgun which produces a high velocity plume of plasma that is injected into the combustion chamber of an engine. Unlike other types of alternative ignitors, such as plasma jet ignitors, electromagnetic forces enhance the acceleration of the plasma generated by a railplug. Thus, for a railplug, the combined effects of electromagnetic and thermodynamic forces drive the plasma into the combustion chamber. Several engine operating conditions or configurations can be identified that traditionally present ignition problems, and might benefit from enhanced ignition systems. One of these is ultra-lean combustion in spark ignition (SI) engines. This concept has the potential for lowering emissions of NO(x) while simultaneously improving thermal efficiency. Unfortunately, current lean burn engines cannot be operated sufficiently lean before ignition related problems are encountered to offer any benefits. High EGR engines have similar potential for emissions improvement, but also experience similar ignition problems, particularly at idle. Other potential applications include diesel cold start, alcohol and dual fuel engines, and high altitude relight of gas turbines. The railplug may find application for any of the above. This project focused on three of these potential applications: lean burn SI engines, high EGR SI engines, and diesel cold start.

  3. Effect of Various Ignition Timings on Combustion Process and Performance of Gasoline Engine

    Directory of Open Access Journals (Sweden)

    Lukáš Tunka

    2017-01-01

    Full Text Available This article deals with the effect of the ignition timing on the output parameters of a spark-ignition engine. The main assessed parameters include the output parameters of the engine (engine power and torque, cylinder pressure variation, heat generation and burn rate. However, the article also discusses the effect of the ignition timing on the temperature of exhaust gases, the indicated mean effective pressure, the combustion duration, combustion stability, etc. All measurements were performed in an engine test room in the Department of Technology and Automobile Transport at Mendel University in Brno, on a four-cylinder AUDI engine with a maximum power of 110 kW, as indicated by the manufacturer. To control and change the ignition timing of the engine, a fully programmable Magneti Marelli control unit was used. The experimental measurements were performed on 8 different ignition timings, from 18 °CA to 32 °CA BTDC at wide throttle open and a constant engine speed (2500 rpm, with a stoichiometric mixture fraction. The measurement results showed that as the ignition timing increases, the engine power and torque also increase. The increase in these parameters is a reflection of higher pressure in the cylinder, the maximum value of which is achieved at a higher ignition timing near top dead centre in thepower stroke. In these conditions we can expect higher engine efficiency. It was also found that the combustion is more stable with a higher value of ignition timing. No significant difference was found in the combustion duration.

  4. Third automotive fuel economy research contractors coordination meeting

    Science.gov (United States)

    Gauthier, C. L.

    1980-12-01

    Topic areas covered include: industry analyses; driver energy conservation; heavy duty trucks; consumer research and market demand; vehicle weight reduction; and diesel engine studies are presented. Spark ignition engine and drivetrain improvements.

  5. Feasibility of a Dual-Fuel Engine Fuelled with Waste Vegetable Oil and Municipal Organic Fraction for Power Generation in Urban Areas

    Directory of Open Access Journals (Sweden)

    L. De Simio

    2012-01-01

    Full Text Available Biomass, in form of residues and waste, can be used to produce energy with low environmental impact. It is important to use the feedstock close to the places where waste are available, and with the shortest conversion pathway, to maximize the process efficiency. In particular waste vegetable oil and the organic fraction of municipal solid waste represent a good source for fuel production in urban areas. Dual fuel engines could be taken into consideration for an efficient management of these wastes. In fact, the dual fuel technology can achieve overall efficiencies typical of diesel engines with a cleaner exhaust emission. In this paper the feasibility of a cogeneration system fuelled with waste vegetable oil and biogas is discussed and the evaluation of performance and emissions is reported on the base of experimental activities on dual fuel heavy duty engine in comparison with diesel and spark ignition engines. The ratio of biogas potential from MSW and biodiesel potential from waste vegetable oil was estimated and it results suitable for dual fuel fuelling. An electric power installation of 70 kW every 10,000 people could be achieved.

  6. A Review on Atomization and Sprays of Biofuels for IC Engine Applications

    Directory of Open Access Journals (Sweden)

    Prasad Boggavarapu

    2013-06-01

    Full Text Available Ever increasing energy requirements, environmental concerns and energy security needs are strongly influencing engine researchers to consider renewable biofuels as alternatives to fossil fuels. Spray process being important in IC engine combustion, existing literature on various biofuel sprays is reviewed and summarized. Both experimental and computational research findings are reviewed in a detailed manner for compression ignition (CI engine sprays and briefly for spark ignition (SI engine sprays. The physics of basic atomization process of sprays from various injectors is included to highlight the most recent research findings followed by discussion highlighting the effect of physico-chemical properties on spray atomization for both biofuels and fossil fuels. Biodiesel sprays are found to penetrate faster and have narrow spray plume angle and larger droplet sizes compared to diesel. Results of analytical and computational models are shown to be useful in shedding light on the actual process of atomization. However, further studies on understanding primary atomization and the effect of fuel properties on primary atomization are required. As far as secondary atomization is concerned, changes in regimes are observed to occur at higher air-jet velocities for biodiesel compared to those of diesel. Evaporating sprays revealed that the liquid length is longer for biodiesel. Pure plant oil sprays with potential use in CI engines may require alternative injector technology due to slower breakup as compared to diesel. Application of ethanol to gasoline engines may be feasible without any modifications to port fuel injection (PFI engines. More studies are required on the application of alternative fuels to high pressure sprays used in Gasoline Direct Injection (GDI engines.

  7. Simulation of Kinematics Characteristics of a Direct Injection Gasoline Engine at Direct Start%直接起动阶段直喷汽油机运动特性的模拟

    Institute of Scientific and Technical Information of China (English)

    曹志成; 何邦全

    2015-01-01

    建立了直喷汽油机的三维数值模型和运动学模型,并进行了试验验证。模拟了直喷汽油机在直接起动过程中不同喷油策略和点火时刻下的燃烧特性、反转和正转过程的运动特性。结果表明:与单次喷油相比,采用两次喷油策略时,首个着火气缸内混合气燃烧后的最大气缸压力较大,而且其大小受到点火时刻的影响;首个着火气缸内混合气燃烧后的最大气缸压力较大,则直喷汽油机反转过程中转过的最大角度较大;在各种喷油条件下,第2个着火气缸在反转到其最大转角前2°左右点火,正转过程转速较高,有利于直喷汽油机的直接起动。%A three-dimensional model and a one-dimensional kinematics model for a direct injec-tion gasoline engine were established and validated through engine experiments.The combustion characteristics in the first firing cylinder and the kinematics characteristics of the engine under the conditions of forward and reverse rotation were simulated when different fuel injection methods and spark ignition timings were employed at direct start.The results show that the peak cylinder pressure in the first firing cylinder after combustion in the cases of split injection is higher than that at single injection.But its magnitude is affected by spark ignition timing.Higher peak cylinder pressure increa-ses the crank angles,which the engine can move in the reverse rotation direction.The engine speed in the forward rotation direction is the largest when the sequent cylinder is ignited at about 2°before the biggest reverse crank angles in both single injection and split injection,which is helpful to a successful direct start.

  8. Research on Control-Oriented Modeling for Turbocharged SI and DI Gasoline Engines

    Directory of Open Access Journals (Sweden)

    Feitie Zhang

    2015-01-01

    Full Text Available In order to analyze system performance and develop model-based control algorithms for turbocharged spark ignition and direct injection (SIDI gasoline engines, a control oriented mean value model is developed and validated. The model is constructed based on theoretical analysis for the different components, including the compressor, turbine, air filter, intercooler, throttle, manifold, and combustion chamber. Compressor mass flow and efficiency are modeled as parameterized functions. A standard nozzle model is used to approximate the mass flow through the turbine, and the turbine efficiency is modeled as a function of blade speed ratio (BSR. The air filter is modeled as a tube for capturing its pressure drop feature. The effectiveness number of transfer units (NTU modeling method is utilized for the intercooler. The throttle model consists of the standard nozzle model with an effective area regressed to throttle position. Manifolds are modeled for their dynamically varying pressure state. For the cylinder, the air mass flow into cylinders, fuel mass, torque, and exhaust temperature are modeled. Compared to the conventional lookup table approach, transient dynamics error can be improved significantly through using the model from this work.

  9. Development of stratified-charge engine by impingement of fuel jet. ; Test results with gasoline fuel. Chokufunshiki shototsu kakusan sojo kyuki kikan no kaihatsu. ; Gasoline nenryo ni yoru jikken kekka

    Energy Technology Data Exchange (ETDEWEB)

    Kato, S.; Onishi, S. (Japan Clean Engine Lab. Co. Ltd., Ishikawa (Japan))

    1991-04-25

    Development was made of direct fuel injection stratified-charge method (OSKA nethod), to make the mixture formation in the direct fuel injection engine by having fuel jet positively impinge on the impingement part, installed in the combustion chamber. In the present report, the following conclusion was obtained through experiment on gasoline fuel by a single cylinder engine with a spark ignition method, combined with the OSKA method: High compressive ratio was made adoptable by applying an OSKA method, using a single hole nozzle with low opening pressure. Due to feed air swirl, made unnecessary for the mixture formation, adoption of early injection under the high load, etc., the highest brake mean effective pressure attained to 1.04MPa, which is almost equivalent to that of carburetor type automobile gasoline engine, while the highest brake thermal efficiency did to 37.7%, which is so to that of direct fuel injection diesel engine, equal in volume. Also under the low load, obtained was a high thermal efficiency, nearing that of diesel engine. 8 refs., 9 figs., 2 tabs.

  10. Impacts of Mid-level Biofuel Content in Gasoline on SIDI Engine-Out and Tailpipe Particulate Matter Emissions: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    He, X.; Ireland, J. C.; Zigler, B. T.; Ratcliff, M. A.; Knoll, K. E.; Alleman, T. L.; Tester, J. T.

    2011-02-01

    The influences of ethanol and iso-butanol blended with gasoline on engine-out and post Three-Way Catalyst (TWC) particle size distribution and number concentration were studied using a GM 2.0L turbocharged Spark Ignition Direct Injection (SIDI) engine. The engine was operated using the production ECU with a dynamometer controlling the engine speed and the accelerator pedal position controlling the engine load. A TSI Fast Mobility Particle Sizer (FMPS) spectrometer was used to measure the particle size distribution in the range from 5.6 to 560 nm with a sampling rate of 1 Hz. US federal certification gasoline (E0), two ethanol-blended fuels (E10 and E20), and 11.7% iso-butanol blended fuel (BU12) were tested. Measurements were conducted at ten selected steady-state engine operation conditions. Bi-modal particle size distributions were observed for all operating conditions with peak values at particle sizes of 10 nm and 70 nm. Idle and low speed / low load conditions emitted higher total particle numbers than other operating conditions. At idle, the engine-out Particulate Matter (PM) emissions were dominated by nucleation mode particles, and the production TWC reduced these nucleation mode particles by more than 50%, while leaving the accumulation mode particle distribution unchanged. At engine load higher than 6 bar NMEP, accumulation mode particles dominated the engine-out particle emissions and the TWC had little effect. Compared to the baseline gasoline (E0), E10 does not significantly change PM emissions, while E20 and BU12 both reduce PM emissions under the conditions studied. Iso-butanol was observed to impact PM emissions more than ethanol, with up to 50% reductions at some conditions. In this paper, the issues related to PM measurement using FMPS are also discussed. While some uncertainties are due to engine variation, the FMPS must be operated under careful maintenance procedures in order to achieve repeatable measurement results.

  11. Long term continuous use of auto LPG causes thermal pitting in automotive S. I. engine parts

    Energy Technology Data Exchange (ETDEWEB)

    Mandloi, R.K.; Rehman, A. [Maulana Azad National Institute of Technology, Bhopal (India). Mechanical Engineering Dept.

    2010-07-01

    The increasing cost of liquid hydrocarbons in recent years accompanied by the tough rules and regulations regarding exhaust emissions has stimulated interest in alternative fuels for automotive engines. Liquefied Petroleum Gas (LPG) has been suggested as a convenient, clean burning less pollutant fuel. Therefore it is also known as green fuel. However, the selection of an alternative fuel is not the end of the task. The selected fuel has to be exploited to its best capacity to serve the task for which it was chosen. Fuel consumption and heat losses from the engine are related; in a country like ours fuel consumption can be improved by optimizing the amount of heat generated in combustion chamber and surroundings. Since LPG burns cleaner with less carbon build-up, oil contamination, engine wear is reduced and the life of some components such as piston rings, and bearings is much longer than with gasoline. The high octane of LPG also minimizes wear from engine knock. On the other hand in the LPG-run SI Engine it is observed that the hot spots lead to surface pitting on the Engine Cylinder Block, Head, Valves, Valve stem and clearance increase in Valve guides. Apart from this, with some time it may lead to development of cracks and distortion in Cylinder Heads. This can be attributed to rise in temperature of the damaged / pitted area near combustion chamber. Experimental research into the use of LPG in spark ignition outboard engines presented with bottled LPG dosed gaseous form. The aim of the study was to determine the basic parameters and quantify the emission index, when LPG is used instead of gasoline. The results obtained indicate that with the use of LPG, specific fuel consumption, CO{sub 2} and CO emissions were much lower without noticeable power loss but in contrast, NO{sub x} emissions were much higher.

  12. Increased Efficiency in SI Engine with Air Replaced by Oxygen in Argon Mixture

    Energy Technology Data Exchange (ETDEWEB)

    Killingsworth, N J; Rapp, V H; Flowers, D L; Aceves, S M; Chen, J; Dibble, R

    2010-01-13

    Basic engine thermodynamics predicts that spark ignited engine efficiency is a function of both the compression ratio of the engine and the specific heat ratio of the working fluid. In practice the compression ratio of the engine is often limited due to knock. Both higher specific heat ratio and higher compression ratio lead to higher end gas temperatures and increase the likelihood of knock. In actual engine cycles, heat transfer losses increase at higher compression ratios and limit efficiency even when the knock limit is not reached. In this paper we investigate the role of both the compression ratio and the specific heat ratio on engine efficiency by conducting experiments comparing operation of a single-cylinder variable-compression-ratio engine with both hydrogen-air and hydrogen-oxygen-argon mixtures. For low load operation it is found that the hydrogen-oxygen-argon mixtures result in higher indicated thermal efficiencies. Peak efficiency for the hydrogen-oxygen-argon mixtures is found at compression ratio 5.5 whereas for the hydrogen-air mixture with an equivalence ratio of 0.24 the peak efficiency is found at compression ratio 13. We apply a three-zone model to help explain the effects of specific heat ratio and compression ratio on efficiency. Operation with hydrogen-oxygen-argon mixtures at low loads is more efficient because the lower compression ratio results in a substantially larger portion of the gas to reside in the adiabatic core rather than in the boundary layer and in the crevices, leading to less heat transfer and more complete combustion.

  13. EGR对减少UHC和CO排放的影响与分析%Effect and Analysis of EGR on Reducing UHC and CO Emission in Homogeneous Charge Two-Stroke Engines

    Institute of Scientific and Technical Information of China (English)

    赵新顺; 刘德新; 丁伟东; 毛长青

    2004-01-01

    分析了二冲程均质发动机UHC和CO的来源,介绍了一种能够大幅度降低UHC和CO的方法.试验是在二冲程发动机怠速废气再循环量较大情况下进行的,怠速时,通过在SI二冲程发动机上增加EGR,发现UHC从7 800×10-6降低到3 000×10-6,CO从3%降低到0.2%,循环变动也减小了.EGR中的活性物质与新鲜充量充分反应改善了预燃过程.由此证明,可以通过增加EGR实现发动机稳定运行,并在当量比和稀燃条件下得到了同样结果.试验表明,UHC和CO主要来自余隙中的残余燃料,说明燃烧温度不是影响UHC和CO的主要因素,决定因素是第一阶段燃烧前缸内发生的预燃反应程度.活性物质的重要性已被试验证实,试验中用氮气和空气代替EGR稀释混合气,发现火花点火在EGR中是可行的,在空气和氮气中却不行.%This paper analyzes the sources of unburned hydrocarbons(UHC) and CO from two-stroke homogeneous charge spark ignition (SI) engines, describing an approach with the potential to substantially reduce UHC and CO in this system based on the experiments carried out on a two-stroke engine in idle condition with high levels of internal exhaust gas recirculation (EGR). By increasing internal EGR in a spark ignited two-stroke engine at idle, UHC was reduced from 7 800 x 10-6 to 3 000 x 10-6, CO was reduced from 3% to 0.2%, and cyclic variability was reduced as well. Increased EGR allowed active species in the burned gases to react with the fresh charge well in advance of the first stage ignition. The results that stable engine operation can be obtained with additional internal EGR. Similar results were obtained in stoichiometric and lean conditions. Further experimental and model results indicate that the main source of UHC and CO emissions is the fuel trapped in crevices,which suggests that the combustion temperature is not the main factor affecting UHC and CO. The critical factor is the pre-ignition reaction that occurs in

  14. Multi-dimensional modelling of spray, in-cylinder air motion and fuel–air mixing in a direct-injection engine

    Indian Academy of Sciences (India)

    N Abani; S Bakshi; R V Ravikrishna

    2007-10-01

    In this work, three-dimensional fuel–air mixing inside a conventional spark ignition engine cylinder is simulated under direct injection conditions. The motivation is to explore retrofitting of conventional engines for direct injection to take advantage of low emissions and high thermal efficiency of the direct injection concept. Fuel–air mixing is studied at different loads by developing and applying a model based on the Lagrangian-drop and Eulerian-fluid (LDEF) procedure for modelling the two-phase flow. The Taylor Analogy Breakup (TAB) model for modelling the hollow cone spray and appropriate models for droplet impingement, drag and evaporation are used. Moving boundary algorithm and two-way interaction between both phases are implemented. Fuel injection timing and quantity is varied with load. Results show that near-stoichiometric fuel–air ratio region is observed at different locations depending on the load. The model developed serves to predict the fuel–air mixing spatially and temporally, and hence is a useful tool in design and optimization of direct injection engines with regards to injector and spark plug locations. Simulations over a range of speed and load indicate the need for a novel ignition strategy involving dual spark plugs and also provide guidelines in deciding spark plug locations.

  15. Numerical investigations on HCCI engine with increased induction induced swirl and engine speed

    Institute of Scientific and Technical Information of China (English)

    T. Karthikeya Sharma; G. Amba Prasad Rao; K. Madhu Murthy

    2015-01-01

    Homogeneous charge compression ignition (HCCI) mode of combustion is popularly known for achieving simultaneous reduction of NOx as well as soot emissions as it combines the compression ignition (CI) and spark ignition (SI) engine features. In this work, a CI engine was simulated to work in HCCI mode and was analyzed to study the effect of induction induced swirl under varying speeds using three-zone extended coherent flame combustion model (ECFM-3Z, compression ignition) of STAR-CD. The analysis was done considering speed ranging from 800 to 1600 r/min and swirl ratios from 1 to 4. The present study reveals that ECFM-3Z model has well predicted the performance and emissions of CI engine in HCCI mode. The simulation predicts reduced in-cylinder pressures, temperatures, wall heat transfer losses, and piston work with increase in swirl ratio irrespective of engine speed. Also, simultaneous reduction in CO2 and NOx emissions is realized with higher engine speeds and swirl ratios. Low speeds and swirl ratios are favorable for low CO2 emissions. It is observed that increase in engine speed causes a marginal reduction in in-cylinder pressures and temperatures. Also, higher turbulent energy and velocity magnitude levels are obtained with increase in swirl ratio, indicating efficient combustion necessitating no modifications in combustion chamber design. The investigations reveal a total decrease of 38.68% in CO2 emissions and 12.93% in NOx emissions when the engine speed increases from 800 to 1600 r/min at swirl ratio of 4. Also an increase of 14.16% in net work done is obtained with engine speed increasing from 800 to 1600 r/min at swirl ratio of 1. The simulation indicates that there is a tradeoff observed between the emissions and piston work. It is finally concluded that the HCCI combustion can be regarded as low temperature combustion as there is significant decrease in in-cylinder temperatures and pressures at higher speeds and higher swirl ratios.

  16. Improved Engine Design Concepts Using the Second Law of Thermodynamics

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-09-30

    This project was aimed at developing and using numerical tools which incorporate the second law of thermodynamics to better understand engine operation and particularly the combustion process. A major activity of this project was the continual enhancement and use of an existing engine cycle simulation to investigate a wide range of engine parameters and concepts. The major motivation of these investigations was to improve engine efficiency. These improvements were examined from both the first law and second law perspective. One of the most important aspects of this work was the identification of the combustion irreversibilities as functions of engine design and operating parameters. The combustion irreversibility may be quantified in a number of ways but one especially useful way is by determining the destruction of exergy (availability) during the combustion process. This destruction is the penalty due to converting the fuel exergy to thermal energy for producing work. The engine cycle simulation was used to examine the performance of an automotive (5.7 liter), V-8 spark-ignition engine. A base case was defined for operation at 1400 rpm, stoichiometric, MBT spark timing with a bmep of 325 kPa. For this condition, the destruction of exergy during the combustion process was 21.0%. Variations of many engine parameters (including speed, load, and spark timing) did not alter the level of destruction very much (with these variations, the exergy destruction was within the range of 20.5-21.5%). Also, the use of turbocharging or the use of an over-expanded engine design did not significantly change the exergy destruction. The exergy destruction during combustion was most affected by increased inlet oxygen concentration (which reduced the destruction due to the higher combustion temperatures) and by the use of cooled EGR (which increased the destruction). This work has demonstrated that, in general, the exergy destruction for conventional engines is fairly constant ({approx

  17. 40 CFR 91.3 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... 40 CFR 89.2. Operating hours means: (1) For engine storage areas or facilities, all times during... operating characteristics significantly similar to the theoretical Otto combustion cycle. Spark-ignition...

  18. Original Research

    African Journals Online (AJOL)

    adverse health effects and deteriorate environmental quality. To address the serious ... Spark-Ignition (SI) and diesel engine (CI) are ... Hong Kong, gasoline and diesel fuel are highly .... preheating of crude palm oil (CPO) on injection system ...

  19. Global Journal of Pure and Applied Sciences - Vol 16, No 2 (2010)

    African Journals Online (AJOL)

    Performance of maize (Zea mays l.) ... Growth and yield responses of sweet potato (ipomoea batatas) to time of potassium fertilzer ... Effect of gasket of varying thickness on spark ignition engines · EMAIL FULL TEXT EMAIL FULL TEXT

  20. IMPROVEMENT TO PIPELINE COMPRESSOR ENGINE RELIABILITY THROUGH RETROFIT MICRO-PILOT IGNITION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Ted Bestor

    2004-06-01

    This report documents the second year's effort towards a 3-year program to develop micropilot ignition systems for existing pipeline compressor engines. In essence, all Phase II goals and objectives were met. We intend to proceed with the Phase III research plan, as set forth by the applicable Research Management Plan. The objective for Phase II was to further develop and optimize the micropilot ignition system for large bore, slow speed engines operating at low compression ratios. The primary elements of Micropilot Phase II were to evaluate the results for the 4-cylinder system prototype developed for Phase I, then optimize this system to demonstrate the technology's readiness for the field demonstration phase. In all, there were twelve (12) tasks defined and executed to support objectives in a stepwise fashion. Task-specific approaches and results are documented in this report. Research activities for Micropilot Phase II were conducted with the understanding that the efforts are expected to result in a commercial product to capture and disseminate the efficiency and environmental benefits of this new technology. Commercially-available fuel injection products were identified and applied to the program where appropriate. Modifications to existing engine components were kept to a minimum. This approach will minimize the overall time-to-market requirements, while meeting performance and cost criteria. The optimized four-cylinder system data demonstrated significant progress compared to Phase I results, as well as traditional spark ignition systems. An extensive testing program at the EECL using the GMV-4 test engine demonstrated that: (1) In general, the engine operated more stable fewer misfires and partial combustion events when using the 3-hole injectors compared to the 5-hole injectors used in Phase I. (2) The engine had, in general, a wider range of operation with the 3-hole injectors. Minimum operational boost levels were approximately 5&apos

  1. UV-visible digital imaging of split injection in a Gasoline Direct Injection engine

    Directory of Open Access Journals (Sweden)

    Merola Simona Silvia

    2015-01-01

    Full Text Available Ever tighter limits on pollutant emissions and the need to improve energy conversion efficiency have made the application of gasoline direct injection (GDI feasible for a much wider scale of spark ignition engines. Changing the way fuel is delivered to the engine has thus provided increased flexibility but also challenges, such as higher particulate emissions. Therefore, alternative injection control strategies need to be investigated in order to obtain optimum performance and reduced environmental impact. In this study, experiments were carried out on a single-cylinder GDI optical engine fuelled with commercial gasoline in lean-burn conditions. The single-cylinder was equipped with the head of a commercial turbocharged engine with similar geometrical specifications (bore, stroke, compression ratio and wall guided fuel injection. Optical accessibility was ensured through a conventional elongated hollow Bowditch piston and an optical crown, accommodating a fused-silica window. Experimental tests were performed at fixed engine speed and injection pressure, whereas the injection timing and the number of injections were adjusted to investigate their influence on combustion and emissions. UV-visible digital imaging was applied in order to follow the combustion process, from ignition to the late combustion phase. All the optical data were correlated with thermodynamic analysis and measurements of exhaust emissions. Split injection strategies (i.e. two injections per cycle with respect to single injection increased combustion efficiency and stability thanks to an improvement of fuel air mixing. As a consequence, significant reduction in soot formation and exhaust emission with acceptable penalty in terms of HC and NOx were measured.

  2. Engine cylinder pressure reconstruction using crank kinematics and recurrently-trained neural networks

    Science.gov (United States)

    Bennett, C.; Dunne, J. F.; Trimby, S.; Richardson, D.

    2017-02-01

    A recurrent non-linear autoregressive with exogenous input (NARX) neural network is proposed, and a suitable fully-recurrent training methodology is adapted and tuned, for reconstructing cylinder pressure in multi-cylinder IC engines using measured crank kinematics. This type of indirect sensing is important for cost effective closed-loop combustion control and for On-Board Diagnostics. The challenge addressed is to accurately predict cylinder pressure traces within the cycle under generalisation conditions: i.e. using data not previously seen by the network during training. This involves direct construction and calibration of a suitable inverse crank dynamic model, which owing to singular behaviour at top-dead-centre (TDC), has proved difficult via physical model construction, calibration, and inversion. The NARX architecture is specialised and adapted to cylinder pressure reconstruction, using a fully-recurrent training methodology which is needed because the alternatives are too slow and unreliable for practical network training on production engines. The fully-recurrent Robust Adaptive Gradient Descent (RAGD) algorithm, is tuned initially using synthesised crank kinematics, and then tested on real engine data to assess the reconstruction capability. Real data is obtained from a 1.125 l, 3-cylinder, in-line, direct injection spark ignition (DISI) engine involving synchronised measurements of crank kinematics and cylinder pressure across a range of steady-state speed and load conditions. The paper shows that a RAGD-trained NARX network using both crank velocity and crank acceleration as input information, provides fast and robust training. By using the optimum epoch identified during RAGD training, acceptably accurate cylinder pressures, and especially accurate location-of-peak-pressure, can be reconstructed robustly under generalisation conditions, making it the most practical NARX configuration and recurrent training methodology for use on production engines.

  3. Modelling cycle to cycle variations in an SI engine with detailed chemical kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Etheridge, Jonathan; Mosbach, Sebastian; Kraft, Markus [Department of Chemical Engineering and Biotechnology, University of Cambridge (United Kingdom); Wu, Hao; Collings, Nick [Department of Engineering, University of Cambridge (United Kingdom)

    2011-01-15

    This paper presents experimental results and a new computational model that investigate cycle to cycle variations (CCV) in a spark ignition (SI) engine. An established stochastic reactor model (SRM) previously used to examine homogeneous charge compression ignition (HCCI) combustion has been extended by spark initiation, flame propagation and flame termination sub-models in order to simulate combustion in SI engines. The model contains a detailed chemical mechanism but relatively short computation times are achieved. The flame front is assumed to be spherical and centred at the spark location, and a pent roof and piston bowl geometry are accounted for. The model is validated by simulating the pressure profile and emissions from an iso-octane fuelled single cylinder research engine that showed low CCV. The effects of key parameters are investigated. Experimental results that show cycle to cycle fluctuations in a four-cylinder naturally aspirated gasoline fuelled SI engine are presented. The model is then coupled with GT-Power, a one-dimensional engine simulation tool, which is used to simulate the breathing events during a multi-cycle simulation. This allows an investigation of the cyclic fluctuations in peak pressure. The source and magnitude of nitric oxide (NO) emissions produced by different cycles are then investigated. It was found that faster burning cycles result in increased NO emissions compared with cycles that have a slower rate of combustion and that more is produced in the early stages of combustion compared with later in the cycle. The majority of NO was produced via the thermal mechanism just after combustion begins. (author)

  4. The influence of high-octane fuel blends on the performance of a two-stroke SI engine with knock-limited-compression ratio

    Science.gov (United States)

    Poola, Ramesh B.; Bhasker, T.; Nagalingam, B.; Gopalakrishnan, K. V.

    The use of alcohol-gasoline blends enables the favorable features of alcohols to be utilized in spark ignition (SI) engines while avoiding the shortcomings of their application as straight fuels. Eucalyptus and orange oils possess high octane values and are also good potential alternative fuels for SI engines. The high octane value of these fuels can enhance the octane value of the fuel when it is blended with low-octane gasoline. In the present work, 20 percent by volume of orange oil, eucalyptus oil, methanol and ethanol were blended separately with gasoline, and the performance, combustion and exhaust emission characteristics were evaluated at two different compression ratios. The phase separation problems arising from the alcohol-gasoline blends were minimized by adding eucalyptus oil as a cosolvent. Test results indicate that the compression ratio can be raised from 7.4 to 9 without any detrimental effect, due to the higher octane rating of the fuel blends. Knock-limited maximum brake output also increases due to extension of the knock limit. The knock limit is extended by methanol-eucalyptus-ethanol-orange oil blends, in descending order.

  5. 76 FR 38155 - California State Nonroad Engine Pollution Control Standards; Ocean-Going Vessels At-Berth in...

    Science.gov (United States)

    2011-06-29

    ... Regulation is designed to reduce emissions of oxides of nitrogen and particulate matter from auxiliary diesel... restricted by statute. EPA's Office of Transportation and Air Quality also maintains a webpage that contains... California ports (``At-Berth Regulation'').\\1\\ The At-Berth Regulation is designed to significantly...

  6. 78 FR 31536 - California State Nonroad Engine Pollution Control Standards; In-Use Heavy Duty Vehicles (as...

    Science.gov (United States)

    2013-05-24

    ... Diesel Particulate Matter, Oxides of Nitrogen and Other Criteria Pollutants from In-Use Heavy-Duty Diesel... motor vehicles which are not the subject of this decision (such regulations are not preempted under the... subsection in the context of section 209(b) motor vehicle waivers).\\8\\ \\6\\ 59 FR 36969 (July 20, 1994)....

  7. 77 FR 50502 - California State Nonroad Engine Pollution Control Standards; In-Use Heavy-Duty Vehicles (As...

    Science.gov (United States)

    2012-08-21

    ... the comment that is placed in the public docket and made available on the Internet. If you submit an... July 20, 1994, EPA promulgated a rule that sets forth, among other things, regulations providing the... 13, California Code of Regulations, section 2025. \\6\\ The definition of yard truck is at section 2025...

  8. Real-time analysis of aromatics in combustion engine exhaust by resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry (REMPI-TOF-MS): a robust tool for chassis dynamometer testing

    Energy Technology Data Exchange (ETDEWEB)

    Adam, T.W. [European Commission Joint Research Centre, Institute for Environment and Sustainability, Transport and Air Quality Unit, Ispra, VA (Italy); Clairotte, M.; Manfredi, U.; Carriero, M.; Martini, G.; Krasenbrink, A.; Astorga, C. [European Commission Joint Research Centre, Institute for Environment and Sustainability, Transport and Air Quality Unit, Ispra, VA (Italy); European Commission Joint Research Centre, Institute for Energy and Transport, Sustainable Transport Unit, Ispra, Varese (Italy); Streibel, T.; Pommeres, A.; Sklorz, M. [University of Rostock, Analytical Chemistry/Joint Mass Spectrometry Centre, Institute of Chemistry, Rostock (Germany); Elsasser, M.; Zimmermann, R. [Cooperation Group Complex Molecular Systems (CMA)/Joint Mass Spectrometry Centre (JMSC), Neuherberg (Germany); University of Rostock, Analytical Chemistry/Joint Mass Spectrometry Centre, Institute of Chemistry, Rostock (Germany)

    2012-07-15

    Resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry (REMPI-TOF-MS) is a robust method for real-time analysis of monocyclic and polycyclic aromatic hydrocarbons in complex emissions. A mobile system has been developed which enables direct analysis on site. In this paper, we utilize a multicomponent calibration scheme based on the analytes' photo-ionisation cross-sections relative to a calibrated species. This allows semi-quantification of a great number of components by only calibrating one compound of choice, here toluene. The cross-sections were determined by injecting nebulised solutions of aromatic compounds into the TOF-MS ion source with the help of a HPLC pump. Then, REMPI-TOF-MS was implemented at various chassis dynamometers and test cells and the exhaust of the following vehicles and engines investigated: a compression ignition light-duty (LD) passenger car, a compression ignition LD van, two spark ignition LD passenger cars, 2 two-stroke mopeds, and a two-stroke engine of a string gas trimmer. The quantitative time profiles of benzene are shown. The results indicate that two-stroke engines are a significant source for toxic and cancerogenic compounds. Air pollution and health effects caused by gardening equipment might still be underestimated. (orig.)

  9. Real-time analysis of aromatics in combustion engine exhaust by resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry (REMPI-TOF-MS): a robust tool for chassis dynamometer testing.

    Science.gov (United States)

    Adam, T W; Clairotte, M; Streibel, T; Elsasser, M; Pommeres, A; Manfredi, U; Carriero, M; Martini, G; Sklorz, M; Krasenbrink, A; Astorga, C; Zimmermann, R

    2012-07-01

    Resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry (REMPI-TOF-MS) is a robust method for real-time analysis of monocyclic and polycyclic aromatic hydrocarbons in complex emissions. A mobile system has been developed which enables direct analysis on site. In this paper, we utilize a multicomponent calibration scheme based on the analytes' photo-ionisation cross-sections relative to a calibrated species. This allows semi-quantification of a great number of components by only calibrating one compound of choice, here toluene. The cross-sections were determined by injecting nebulised solutions of aromatic compounds into the TOF-MS ion source with the help of a HPLC pump. Then, REMPI-TOF-MS was implemented at various chassis dynamometers and test cells and the exhaust of the following vehicles and engines investigated: a compression ignition light-duty (LD) passenger car, a compression ignition LD van, two spark ignition LD passenger cars, 2 two-stroke mopeds, and a two-stroke engine of a string gas trimmer. The quantitative time profiles of benzene are shown. The results indicate that two-stroke engines are a significant source for toxic and cancerogenic compounds. Air pollution and health effects caused by gardening equipment might still be underestimated.

  10. IMPROVEMENT TO PIPELINE COMPRESSOR ENGINE RELIABILITY THROUGH RETROFIT MICRO-PILOT IGNITION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Scott Chase; Daniel Olsen; Ted Bestor

    2005-05-01

    This report documents a 3-year research program conducted by the Engines & Energy Conversion Laboratory (EECL) at Colorado State University (CSU) to develop micropilot ignition systems for existing pipeline compressor engines. Research activities for the overall program were conducted with the understanding that the efforts are to result in a commercial product to capture and disseminate the efficiency and environmental benefits of this new technology. An extensive state-of-art review was conducted to leverage the existing body of knowledge of micropilot ignition with respect to retrofit applications. Additionally, commercially-available fuel injection products were identified and applied to the program where appropriate. This approach will minimize the overall time-to-market requirements, while meeting performance and cost criteria. The objective for Phase I was to demonstrate the feasibility of micropilot ignition for large bore, slow speed engines operating at low compression ratios under laboratory conditions at the EECL. The primary elements of Micropilot Phase I were to develop a single-cylinder test chamber to study the injection of pilot fuel into a combustion cylinder and to develop, install and test a multi-cylinder micropilot ignition system for a 4-cylinder, natural gas test engine. In all, there were twelve (12) tasks defined and executed to support these two (2) primarily elements in a stepwise fashion. Task-specific approaches and results are documented in this report. The four-cylinder prototype data was encouraging for the micro-pilot ignition technology when compared to spark ignition. The objective for Phase II was to further develop and optimize the micropilot ignition system at the EECL for large bore, slow speed engines operating at low compression ratios. The primary elements of Micropilot Phase II were to evaluate the results for the 4-cylinder system prototype developed for Phase I, then optimize this system and prepare the technology for

  11. A Review of Sub-Scale Test Methods to Evaluate the Friction and Wear of Ring and Liner Materials for Spark- and Compression Ignition Engines

    Energy Technology Data Exchange (ETDEWEB)

    Blau, P.J.

    2002-01-22

    A review was conducted of past laboratory-scale test methods and to assess their validity for ranking materials and lubricants for use as piston and liner materials in compression-ignition (CI) and spark-ignition (SI) engines. Most of the previous work was aimed at simulating SI engine environments. This report begins with a discussion of the numerous factors that can affect the validity of an approach to simulating engine conditions in a laboratory. These include not only mechanical, chemical and thermal factors, but also human factors as regards how the vehicle is operated and maintained. The next section provides an annotated review of open literature publications that address the issues of laboratory simulation of engine components. A comparison of these studies indicates a lack of sufficient standardization in procedures to enable a systematic comparison of one publication to another. There were just a few studies that compared several laboratory test methods to engine test results, and these indicated that some test methods correlate, at least qualitatively, better than others. The last section provides a series of recommendations for improving the accuracy and validity of laboratory-scale simulations of engine behavior. It became clear that much of the engine wear damage occurs during start-up when the engine is cold, and this calls into the question the usefulness of test methods that attempt to simulate steady-state running conditions. It is recommended that a new standard test method, perhaps developed with the help of the ASTM wear and erosion committee, be developed. It would use cold start-up conditions in the presence of degraded oil, or simulated degraded oil.

  12. Bioblendstocks that Enable High Efficiency Engine Designs

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Robert L.; Fioroni, Gina M.; Ratcliff, Matthew A.; Zigler, Bradley T.; Farrell, John

    2016-11-03

    The past decade has seen a high level of innovation in production of biofuels from sugar, lipid, and lignocellulose feedstocks. As discussed in several talks at this workshop, ethanol blends in the E25 to E50 range could enable more highly efficient spark-ignited (SI) engines. This is because of their knock resistance properties that include not only high research octane number (RON), but also charge cooling from high heat of vaporization, and high flame speed. Emerging alcohol fuels such as isobutanol or mixed alcohols have desirable properties such as reduced gasoline blend vapor pressure, but also have lower RON than ethanol. These fuels may be able to achieve the same knock resistance benefits, but likely will require higher blend levels or higher RON hydrocarbon blendstocks. A group of very high RON (>150) oxygenates such as dimethyl furan, methyl anisole, and related compounds are also produced from biomass. While providing no increase in charge cooling, their very high octane numbers may provide adequate knock resistance for future highly efficient SI engines. Given this range of options for highly knock resistant fuels there appears to be a critical need for a fuel knock resistance metric that includes effects of octane number, heat of vaporization, and potentially flame speed. Emerging diesel fuels include highly branched long-chain alkanes from hydroprocessing of fats and oils, as well as sugar-derived terpenoids. These have relatively high cetane number (CN), which may have some benefits in designing more efficient CI engines. Fast pyrolysis of biomass can produce diesel boiling range streams that are high in aromatic, oxygen and acid contents. Hydroprocessing can be applied to remove oxygen and consequently reduce acidity, however there are strong economic incentives to leave up to 2 wt% oxygen in the product. This oxygen will primarily be present as low CN alkyl phenols and aryl ethers. While these have high heating value, their presence in diesel fuel

  13. Robust Adaptive PID Controller for a Class of Uncertain Nonlinear Systems: An Application for Speed Tracking Control of an SI Engine

    Directory of Open Access Journals (Sweden)

    Tossaporn Chamsai

    2015-01-01

    Full Text Available The sliding mode control (SMC technique with a first-order low-pass filter (LPF is incorporated with a new adaptive PID controller. It is proposed for tracking control of an uncertain nonlinear system. In the proposed control scheme, the adaptation law is able to update the PID controller online during the control process within a short period. The chattering phenomenon of the SMC can be alleviated by incorporation of a first-order LPF, while the robustness of the control system is similar to that of the sliding mode. In the closed-loop control analysis, the convergence condition in the reaching phase and the existence condition of the sliding mode were analyzed. The stability of the closed-loop control is guaranteed in the sense of Lyapunov’s direct method. The simulations and experimental applications of a speed tracking control of a spark ignition (SI engine via electronic throttle valve control architecture are provided to verify the effectiveness and the feasibility of the proposed control scheme.

  14. A novel methodology for non-linear system identification of battery cells used in non-road hybrid electric vehicles

    Science.gov (United States)

    Unger, Johannes; Hametner, Christoph; Jakubek, Stefan; Quasthoff, Marcus

    2014-12-01

    An accurate state of charge (SoC) estimation of a traction battery in hybrid electric non-road vehicles, which possess higher dynamics and power densities than on-road vehicles, requires a precise battery cell terminal voltage model. This paper presents a novel methodology for non-linear system identification of battery cells to obtain precise battery models. The methodology comprises the architecture of local model networks (LMN) and optimal model based design of experiments (DoE). Three main novelties are proposed: 1) Optimal model based DoE, which aims to high dynamically excite the battery cells at load ranges frequently used in operation. 2) The integration of corresponding inputs in the LMN to regard the non-linearities SoC, relaxation, hysteresis as well as temperature effects. 3) Enhancements to the local linear model tree (LOLIMOT) construction algorithm, to achieve a physical appropriate interpretation of the LMN. The framework is applicable for different battery cell chemistries and different temperatures, and is real time capable, which is shown on an industrial PC. The accuracy of the obtained non-linear battery model is demonstrated on cells with different chemistries and temperatures. The results show significant improvement due to optimal experiment design and integration of the battery non-linearities within the LMN structure.

  15. Numerical Methods and Turbulence Modeling for LES of Piston Engines: Impact on Flow Motion and Combustion

    Directory of Open Access Journals (Sweden)

    Misdariis A.

    2013-11-01

    Full Text Available In this article, Large Eddy Simulations (LES of Spark Ignition (SI engines are performed to evaluate the impact of the numerical set-upon the predictedflow motion and combustion process. Due to the high complexity and computational cost of such simulations, the classical set-up commonly includes “low” order numerical schemes (typically first or second-order accurate in time and space as well as simple turbulence models (such as the well known constant coefficient Smagorinsky model (Smagorinsky J. (1963 Mon. Weather Rev. 91, 99-164. The scope of this paper is to evaluate the feasibility and the potential benefits of using high precision methods for engine simulations, relying on higher order numerical methods and state-of-the-art Sub-Grid-Scale (SGS models. For this purpose, two high order convection schemes from the Two-step Taylor Galerkin (TTG family (Colin and Rudgyard (2000 J. Comput. Phys. 162, 338-371 and several SGS turbulence models, namely Dynamic Smagorinsky (Germano et al. (1991 Phys. Fluids 3, 1760-1765 and sigma (Baya Toda et al. (2010 Proc. Summer Program 2010, Stanford, Center for Turbulence Research, NASA Ames/Stanford Univ., pp. 193-202 are considered to improve the accuracy of the classically used Lax-Wendroff (LW (Lax and Wendroff (1964 Commun. Pure Appl. Math. 17, 381-398 - Smagorinsky set-up. This evaluation is performed considering two different engine configurations from IFP Energies nouvelles. The first one is the naturally aspirated four-valve spark-ignited F7P engine which benefits from an exhaustive experimental and numerical characterization. The second one, called Ecosural, is a highly supercharged spark-ignited engine. Unique realizations of engine cycles have been simulated for each set-up starting from the same initial conditions and the comparison is made with experimental and previous numerical results for the F7P configuration. For the Ecosural engine, experimental results are not available yet and only

  16. ENSURING THE AVAILABILITY AND RELIABILITY OF UREA DOSING FOR ON-ROAD AND NON-ROAD

    Energy Technology Data Exchange (ETDEWEB)

    Barton, G; Lonsdale, B

    2003-08-24

    The purpose of this presentation is to address two important issues. The first issue is nationwide availability of urea. The second is assurance by the engine maker that the engine cannot operate without urea. In regard to the first issue, North American urea production can support SCR needs for the Heavy Duty truck industry. The existing distribution methods, pathways and technology could be utilized for urea supply with no new invention required. Urea usage and storage capacity on vehicles would support long distances between tank refills, as SCR could be initially rolled out with a limited infrastructure. The price of urea should be less than diesel fuel and urea SCR should have a fuel economy advantage over competing technologies. It can be in place by 2007. In regard to the second issue, sensor technology exists to monitor urea tank level and verify that the fluid in the tank is urea. NOx sensors are available to monitor tailpipe NOx, ensuring the entire SCR system is functioning properly, and inferring that urea is in the system. The monitoring system could be used to monitor compliance, record faults, and initiate enforcement actions as necessary. The monitoring system could initiate actions to encourage compliance.

  17. 40 CFR 91.104 - Exhaust emission standards for outboard and personal watercraft engines.

    Science.gov (United States)

    2010-07-01

    ... procedure in § 91.207 to determine compliance with the corporate average HC+NOX exhaust emission standard... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION..., for their useful life. (d) A manufacturer must comply with a corporate average HC+NOX...

  18. Survey of modern power plants driven by diesel and gas engines

    Energy Technology Data Exchange (ETDEWEB)

    Niemi, S. [Turku Polytechnic, Turku (Finland)

    1997-12-31

    This report surveys the latest technology of power plants driven by reciprocating internal combustion (IC) engines, from information collected from publications made mainly during the 1990`s. Diesel and gas engines are considered competitive prime movers in power production due mainly to their high full- and part-load brake thermal efficiency, ability to burn different fuels, short construction time and fast start-ups. The market for engine power plants has grown rapidly, with estimated total orders for reciprocating engines of 1 MW output and more reaching the 5000 unit level, (10 GW), between June 1995 and May 1996. Industrialized countries much prefer combined heat and power (CHP) production. Intense interest has been shown in recent years in alternative gas fuels; natural gas appears to be the most promising, but liquid petroleum gas, gas from sewage disposal plants, landfill gas and other biogases, as well as wood gas have also been recognized as other alternatives. Liquid alternatives such as fuels and pyrolysis oil have also been mentioned, in addition to information on coal burning engines. The percentage of gas engines used has increased and different ones are being developed, based on either the traditional spark ignition (SI), dual-fuel technology or the more recent high pressure gas injection system. In cold climates, energy production is largely based on CHP plants. Waste heat is utilized for local, regional or district heating or for industrial uses like drying, heating, cooling etc. Even radiative and convective heat from gen-set surfaces are employed, and boilers are used with exhaust outlet temperatures of below dew point. Combined cycle schemes, including turbo compound systems and steam turbines, are also incorporated into engine power plants in order to increase output and efficiency. Two-stroke, low-speed diesel engine plants show the highest electric efficiencies, with combined cycle plants reaching up to 54 %, while gas engine plants achieved

  19. Study of mechanisms of the formation of specific pollutants emitted by internal combustion engines; Etude des mecanismes de formation des polluants specifiques emis par les moteurs a combustion interne

    Energy Technology Data Exchange (ETDEWEB)

    Zervas, E.

    1996-06-26

    Methods for the analysis on sulfur dioxide, alcohols and organic acids have been developed. The first one includes the capture of the sulfur dioxide in a solution of oxygenated water and the analysis bu ionic chromatography with a conductometric detector. The second one includes the capture in pure water and an analysis bu gas chromatography/flame ionisation detector. The third one uses the capture in pure water and the analysis of the formic acid by an ionic chromatography and of the other acids by gas chromatography. These methods have been applied in the case of vehicles` non-regulated pollutants research. An experiment design, combined specified fuels and analysis of the exhaust gazes, has been applied on a spark ignition engine. These tests proved several qualitative and quantitative correlations between the composition of the fuel and the emitted pollutants. Precursors of hydrocarbons, aldehydes, ketones, alcohols and organic acids have been found. These results show that aromatics and cyclohexane contribute for the benzene`s formation, 1-hexene and cyclohexane for the 1,3 butadiene`s, aromatics, are the precursors of the propionic acid and 0-xylene of the butyric acid. (author)

  20. Flexible design of fuel injection and ignition systems for gasoline direct injection engines; Flexibles Design der Einspritzduese und Effektivitaet von Zuendanlagen fuer Benzin-Direkt-Einspritzung-Motoren

    Energy Technology Data Exchange (ETDEWEB)

    Tokuda, H.; Yoshinaga, T.; Nakashima, T.; Sugiura, S. [DENSO Corp. (Japan); Saitoh, K.; Okabe, S. [NIPPON SOKEN, Inc. (Japan)

    2006-07-01

    First generation ''wall-guided'' DISI engines had stratified lean combustion with a wide spacing between the injector and spark plug. In these engines, however, the combustion timing tended to be too early, leading to the inability to achieve ideal efficiency from the thermodynamic process. One proposal to overcome the disadvantages of ''wall-guided'' DISI engines is second-generation ''spray-guided'' DISI engines. It has stratified lean combustion with a close spacing between the injector and spark plug. In ''spray-guided'' DISI engines, the air-fuel mixture formation is independent of gas flow and piston movement. This enables the most significant possibilities for decreasing fuel consumption. Nevertheless, stratified lean combustion has been criticized for the costs and complexity of the aftertreatment required to achieve particulate and NOx emissions compliance. As one response to this problem, there has been a shift toward DISI development specific to stoichiometric homogeneous combustion. In this report, we will describe DENSO's current status and the future of two critical technologies for DISI fuel spray and ignition. Specifically, we will describe a nozzle concept and a high-performance ignition concept. The first concerns a ''multi-hole nozzle with highly flexible spray formation,'' and the second concerns a ''multi-spark ignition system with a high degree of energy flexibility.'' In addition, we will describe advanced ignition methods involving a plasma and a laser ignition. (orig.)

  1. Numerical simulation and validation of SI-CAI hybrid combustion in a CAI/HCCI gasoline engine

    Science.gov (United States)

    Wang, Xinyan; Xie, Hui; Xie, Liyan; Zhang, Lianfang; Li, Le; Chen, Tao; Zhao, Hua

    2013-02-01

    SI-CAI hybrid combustion, also known as spark-assisted compression ignition (SACI), is a promising concept to extend the operating range of CAI (Controlled Auto-Ignition) and achieve the smooth transition between spark ignition (SI) and CAI in the gasoline engine. In this study, a SI-CAI hybrid combustion model (HCM) has been constructed on the basis of the 3-Zones Extended Coherent Flame Model (ECFM3Z). An ignition model is included to initiate the ECFM3Z calculation and induce the flame propagation. In order to precisely depict the subsequent auto-ignition process of the unburned fuel and air mixture independently after the initiation of flame propagation, the tabulated chemistry concept is adopted to describe the auto-ignition chemistry. The methodology for extracting tabulated parameters from the chemical kinetics calculations is developed so that both cool flame reactions and main auto-ignition combustion can be well captured under a wider range of thermodynamic conditions. The SI-CAI hybrid combustion model (HCM) is then applied in the three-dimensional computational fluid dynamics (3-D CFD) engine simulation. The simulation results are compared with the experimental data obtained from a single cylinder VVA engine. The detailed analysis of the simulations demonstrates that the SI-CAI hybrid combustion process is characterised with the early flame propagation and subsequent multi-site auto-ignition around the main flame front, which is consistent with the optical results reported by other researchers. Besides, the systematic study of the in-cylinder condition reveals the influence mechanism of the early flame propagation on the subsequent auto-ignition.

  2. Effect of ignition timing and hydrogen fraction on combustion and emission characteristics of natural gas direct-injection engine

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    An experimental study on the combustion and emission characteristics of a direct-injection spark-ignited engine fueled with natural gas/hydrogen blends under various ignition timings was conducted.The results show that ignition timing has a significant influence on engine performance,combustion and emissions.The interval between the end of fuel injection and ignition timing is a very important parameter for direct-injection natural gas engines.The turbulent flow in the combustion chamber generated by the fuel jet remains high and relative strong mixture stratification is introduced when decreasing the angle interval between the end of fuel injection and ignition timing giving fast burning rates and high thermal efficiencies.The maximum cylinder gas pressure,maximum mean gas temperature,maximum rate of pressure rise and maximum heat release rate increase with the advancing of ignition timing.However,these parameters do not vary much with hydrogen addition under specific ignition timing indicating that a small hydrogen fraction addition of less than 20% in the present experiment has little influence on combustion parameters under specific ignition timing.The exhaust HC emission decreases while the exhaust CO2 concentration increases with the advancing of ignition timing.In the lean combustion condition,the exhaust CO does not vary much with ignition timing.At the same ignition timing,the exhaust HC decreases with hydrogen addition while the exhaust CO and CO2 do not vary much with hydrogen addition.The exhaust NOx increases with the advancing of' ignition timing and the behavior tends to be more obvious at large ignition advance angle.The brake mean effective pressure and the effective thermal efficiency of natural gas/hydrogen mixture combustion increase compared with those of natural gas combustion when the hydrogen fraction is over 10%.

  3. Multi-objective optimization of internal combustion engine by means of 1D fluid-dynamic models

    Energy Technology Data Exchange (ETDEWEB)

    D' Errico, G.; Cerri, T.; Pertusi, G. [Dipartimento di Energia, Politecnico di Milano, Via Lambruschini 4, 20156 Milan (Italy)

    2011-03-15

    The definition of an efficient optimization methodology for internal combustion engine design using 1D fluid dynamic simulation models is presented. This work aims at discussing the fundamental numerical and fluid dynamic aspects which can lead to the definition of a best practice technique, depending on the complexity of the problem to be dealt with, on the number of design parameters, objective variables and constrains. For these reasons, both single-and multi-objective problems will be addressed, where the former are still of relevant interest (i.e. optimization of engine performances), while the latter have a much wider range of applications and are often characterized by conflicting objectives. The Mesh Adaptive Direct Search (MADS) was chosen among the class of direct search methods and compared with the Genetic Algorithms to solve single-objective problems, and similarly two different algorithms were chosen and compared to solve multi-objective problems: the {epsilon}-constraint method and the NSGA-II (Non-Dominated Sorting Genetic Algorithm). A single cylinder spark ignition engine, used in a motorbike application, was chosen as test case, to allow reduced computational times, without any loss of generality of the results. The analysis evaluate the convergence and efficiency of each methodology for the different problems which are solved. The achieved goal is not the definition of an ever valid mathematical strategy, but here focus is given on the parallel application of a detailed fluid dynamic analysis and automated optimization techniques to suggest a best practice technique to be employed depending on the characteristic of the optimization problem to be solved. (author)

  4. Cycle-by-cycle Variations in a Direct Injection Hydrogen Enriched Compressed Natural Gas Engine Employing EGR at Relative Air-Fuel Ratios.

    Directory of Open Access Journals (Sweden)

    Olalekan Wasiu Saheed

    2014-07-01

    Full Text Available Since the pressure development in a combustion chamber is uniquely related to the combustion process, substantial variations in the combustion process on a cycle-by-cycle basis are occurring. To this end, an experimental study of cycle-by-cycle variation in a direct injection spark ignition engine fueled with natural gas-hydrogen blends combined with exhaust gas recirculation at relative air-fuel ratios was conducted. The impacts of relative air-fuel ratios (i.e. λ = 1.0, 1.2, 1.3 and 1.4 which represent stoichiometric, moderately lean, lean and very lean mixtures respectively, hydrogen fractions and EGR rates were studied. The results showed that increasing the relative air-fuel ratio increases the COVIMEP. The behavior is more pronounced at the larger relative air-fuel ratios. More so, for a specified EGR rate; increasing the hydrogen fractions decreases the maximum COVIMEP value just as increasing in EGR rates increases the maximum COVIMEP value. (i.e. When percentage EGR rates is increased from 0% to 17% and 20% respectively. The maximum COVIMEP value increases from 6.25% to 6.56% and 8.30% respectively. Since the introduction of hydrogen gas reduces the cycle-by-cycle combustion variation in engine cylinder; thus it can be concluded that addition of hydrogen into direct injection compressed natural gas engine employing EGR at various relative air-fuel ratios is a viable approach to obtain an improved combustion quality which correspond to lower coefficient of variation in imep, (COVIMEP in a direct injection compressed natural gas engine employing EGR at relative air-fuel ratios.

  5. Detailed Chemical Kinetic Reaction Mechanisms for Primary Reference Fuels for Diesel Cetane Number and Spark-Ignition Octane Number

    Energy Technology Data Exchange (ETDEWEB)

    Westbrook, C K; Pitz, W J; Mehl, M; Curran, H J

    2010-03-03

    For the first time, a detailed chemical kinetic reaction mechanism is developed for primary reference fuel mixtures of n-hexadecane and 2,2,4,4,6,8,8-heptamethyl nonane for diesel cetane ratings. The mechanisms are constructed using existing rules for reaction pathways and rate expressions developed previously for the primary reference fuels for gasoline octane ratings, n-heptane and iso-octane. These reaction mechanisms are validated by comparisons between computed and experimental results for shock tube ignition and for oxidation under jet-stirred reactor conditions. The combined kinetic reaction mechanism contains the submechanisms for the primary reference fuels for diesel cetane ratings and submechanisms for the primary reference fuels for gasoline octane ratings, all in one integrated large kinetic reaction mechanism. Representative applications of this mechanism to two test problems are presented, one describing fuel/air autoignition variations with changes in fuel cetane numbers, and the other describing fuel combustion in a jet-stirred reactor environment with the fuel varying from pure 2,2,4,4,6,8,8-heptamethyl nonane (Cetane number of 15) to pure n-hexadecane (Cetane number of 100). The final reaction mechanism for the primary reference fuels for diesel fuel and gasoline is available on the web.

  6. Lean-burn engines UHC emission reduction

    Energy Technology Data Exchange (ETDEWEB)

    Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H. [Danish Gas Technology Centre a/s (Denmark); Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K. [Technical University of Denmark. CHEC, Department of Chemical Engineering (Denmark)

    1999-04-01

    The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO{sub 2} on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH{sub 3} addition to the engine inlet was used to increase the NO{sub x} level, and the general trend was a decrease in UHC as the NO{sub x} level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH{sub 3} addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO{sub x} and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested

  7. Lean-burn engines UHC emission reduction

    Energy Technology Data Exchange (ETDEWEB)

    Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H. [Danish Gas Technology Centre a/s (Denmark); Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K. [Technical University of Denmark. CHEC, Department of Chemical Engineering (Denmark)

    1999-04-01

    The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO{sub 2} on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH{sub 3} addition to the engine inlet was used to increase the NO{sub x} level, and the general trend was a decrease in UHC as the NO{sub x} level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH{sub 3} addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO{sub x} and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested

  8. 基于Modelica的生物质燃气内燃机性能模拟研究%Simulation of internal combustion engine fueled by natural gas/liquefied petroleum gas-biogas blends with Modelica

    Institute of Scientific and Technical Information of China (English)

    郭甲生; 秦朝葵; GERHARD Schmitz

    2011-01-01

    Since the physical and chemical characteristics of biogas, some problems such as slow combustion speed, uncompleted burned fuel and high exhaust temperature will occur in its applications in engine. The biogas engine model library was built with the object-oriented language Modelica, the performance of a four-stroke spark-ignition gas engine operating with natural gas/liquefied petroleum gas-biogas blends were investigated. Natural gas (33 %, 67 % and 100%) and liquefied petroleum gas (5%, 10% and 15%) were added to the biogas and were simulated as the fuel of SI engine. The effects of natural gas/liquefied petroleum gas-biogas blends on the performance of spark-ignition engine used for electricity production were numerical investigated, the results were validated through the experiments on a gasoline modified gas engine. The results suggest that: There is an improvement in brake thermal efficiency and brake powers with the addition of natural gas/liquefied petroleum gas in biogas. The feature of reusable and object-orien-ted of Modelica will enhance the modeling and simulation of biogas engine performance greatly not only in accuracy but simulation efficiency, this would be efficient for the design and the optimum work of the biogas fuelled engine.%针对由沼气成分及其理化特性导致的内燃机燃用沼气时会发生燃烧速度慢、后燃严重、排气温度高等问题,将生物质燃气内燃机作为研究对象,基于可重用性及面向对象的Modelica语言建立内燃机模型库,将生物质燃气为燃料对四缸四冲程火花点火内燃机性能进行分析.通过仿真研究不同比例天然气(体积分数分别为33%,67%及100%)和LPG(体积分数分别为5%,10%及15%)对内燃机性能的影响,并在一台原汽油机改装的生物质燃气内燃机进行实验验证.结果表明:随着天然气/LPG的加入,内燃机的热效率及功率有所提高,且随着生物质燃气中天然气/LPG体积分数的增加,内

  9. Sewage sludge based producer gas of rich H{sub 2} content as a fuel for an IC engine

    Energy Technology Data Exchange (ETDEWEB)

    Szwaja, Stanislaw; Cupial, Karol [Czestochowa Univ. of Technology (Poland)

    2010-07-01

    The manuscript presents investigation on hydrogen rich gas combustion in an internal combustion (IC) engine. The gas is obtained from gasification process of sewage sludge which is by-product of waste water treatment in a municipal sewage treatment plant. Recently introduced EU regulations of environmental protection do not allow to use such sludge as a soil fertilizer or substance for landfilling the ground due to its biological toxicity. On another hand, this sludge contains organic content of approximately 45-55% and from this point of view the sludge looks as an attractive material for fuel production through its gasification. This technology, primarily applied for wood gasification, has been also successfully implemented for gasification of sludge. It was found that the producer gas obtained in this way is rich of hydrogen content even up to 25%. This is because of high water content in the sludge that provides favorable conditions for steam reforming resulting in increase of hydrogen in the products of gasification. The high hydrogen content in the producer gas can lead to improper combustion particularly when the combustion takes place in the internal combustion engine. That improper combustion might appear as combustion knock and it is the main problem for the engine in which hydrogen is used as a fuel [1]. Onset of the knock during combustion contributes to rapid increase in heat transfer to the piston crown causing the piston to be quickly overheated that leads to surface erosion and damages. Additionally, engine body vibration coming from the knock significantly shortens engine durability. Conclusions from this investigation provide good premises for combusting the sludge producer gas in the IC engine without any improper combustion anomalies, thus considers this gas as worthy fuel for a stationary engine driven a power generator. The presentation shows results of producer gas combustion in both the spark-ignited and the compression ignition engine with

  10. Comparaison des performances moteur à charge homogène et moteur à charge stratifiée Performance Comparison Between a Homogeneous-Charge Engine and a Stratified-Charge Engine.

    Directory of Open Access Journals (Sweden)

    Raynal B.

    2006-11-01

    Full Text Available Une évaluation des possibilités théoriques d'amélioration des moteurs actuels, faite par simulation mathématique du fonctionnement d'un moteur à allumage commandé, montre qu'un fonctionnement en mélange homogène pauvre permettrait de réduire de 16 % la consommation sur un cycle ECE chaud. Dans les mêmes conditions d'utilisation, un moteur « à charge stratifiée » idéal donnerait lieu à un gain de 41 %. Des modifications limitées du point de vue technologique ont été apportées à un moteur de série et ont permis d'étendre en mélange pauvre sa zone de fonctionnement. Les gains de consommation réalisés par rapport au moteur standard sont compris entre 5 et 10 %. Le recyclage d'une fraction modérée des gaz d'échappement permet de maintenir les émissions de NO x à moins de 5 g/essai sur cycle ECE, en conservant le gain de consommation précédent. L'analyse des performances d'un moteur Honda CVCC au banc d'essai et sur véhicule montre que les niveaux d'émissions relativement bas de ce type de moteur sont obtenus au prix d'une surconsommation importante par rapport à un véhicule équivalent équipé d'un moteur conventionnel. An evaluation of theoretical possibilities of improving existing engines, obtained by mathematical modelisation of a spark-ignition engine, shows that operating with a homogeneous lean mixture produces a 16 % reduction in consumption for a hot ECE cycle. Under the same running conditions, an ideal strotified-charge engine would produce a gain of 41 %.Limited technological modifications were made in a standard engine sa as ta extend its operating zone using a leon mixture. The consumption gains achieved compared with a standard engine are between 5 and 10%. The recycling of a moderate fraction of the exhaust gases enables NO, emissions ta be maintained at less than 5 g/test for an ECE cycle while preserving the preceding consumption gain.The performance analysis of a Honda C/CC engine on a test

  11. Flex Fuel Optimized SI and HCCI Engine

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Guoming; Schock, Harold; Yang, Xiaojian; Huisjen, Andrew; Stuecken, Tom; Moran, Kevin; Zhen, Ron; Zhang, Shupeng

    2013-09-30

    The central objective of the proposed work is to demonstrate an HCCI (homogeneous charge compression ignition) capable SI (spark ignited) engine that is capable of fast and smooth mode transition between SI and HCCI combustion modes. The model-based control technique was used to develop and validate the proposed control strategy for the fast and smooth combustion mode transition based upon the developed control-oriented engine; and an HCCI capable SI engine was designed and constructed using production ready two-step valve-train with electrical variable valve timing actuating system. Finally, smooth combustion mode transition was demonstrated on a metal engine within eight engine cycles. The Chrysler turbocharged 2.0L I4 direct injection engine was selected as the base engine for the project and the engine was modified to fit the two-step valve with electrical variable valve timing actuating system. To develop the model-based control strategy for stable HCCI combustion and smooth combustion mode transition between SI and HCCI combustion, a control-oriented real-time engine model was developed and implemented into the MSU HIL (hardware-in-the-loop) simulation environment. The developed model was used to study the engine actuating system requirement for the smooth and fast combustion mode transition and to develop the proposed mode transition control strategy. Finally, a single cylinder optical engine was designed and fabricated for studying the HCCI combustion characteristics. Optical engine combustion tests were conducted in both SI and HCCI combustion modes and the test results were used to calibrate the developed control-oriented engine model. Intensive GT-Power simulations were conducted to determine the optimal valve lift (high and low) and the cam phasing range. Delphi was selected to be the supplier for the two-step valve-train and Denso to be the electrical variable valve timing system supplier. A test bench was constructed to develop control strategies for

  12. Development and application of laser techniques for studying fuel dynamics and NO formation in engines

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Oeivind

    2000-11-01

    In this work a number of laser techniques have been applied in new ways for combustion diagnostics in engines. The applications cover small two-stroke engines, ordinary spark ignition (SI) engines, direct-injection spark ignition (DISI) engines, and heavy-duty diesel truck engines. In an investigation of unmodified two-stroke engines running at high engine speed, it has been shown that cycle-resolved laser diagnostics are applicable to real-world engines. The emission of unburned fuel was detected at the exhaust port with successful discrimination against other unburned hydrocarbons. Although a few problems remain to be solved in order to get quantitative concentration data, valuable information can nonetheless be attained using this technique. The technique would benefit from the use of a non-fluorescing lubricant, as that would decrease the background fluorescence. Laser-based techniques also provide a useful tool for studying the fuel dynamics inside the cylinder. In the development of DISI engines it is of particular importance to acquire knowledge about the distribution of fuel around the spark plug. Numerical computer codes are often used as design tools in these applications. Laser techniques are capable of yielding instantaneous multi-point concentration information with high spatial and temporal resolution, making them ideal both for validation of CFD simulations and for testing designs. The feasibility of using laser diagnostics in the development of DISI engines has been shown. Future research should be aimed at simplifying the procedure for quantifying the data, since a fairly simple and reliable technique would be an important asset for the industry. In a more fundamental study, it has been shown that it is possible to simultaneously detect a substance in both liquid and vapour phase. Water was used in the study since it is easily produced in both phases. Liquid drops were detected using spontaneous Raman scattering, whereas the vapour surrounding them

  13. Development and application of laser techniques for studying fuel dynamics and NO formation in engines

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Oeivind

    2000-11-01

    In this work a number of laser techniques have been applied in new ways for combustion diagnostics in engines. The applications cover small two-stroke engines, ordinary spark ignition (SI) engines, direct-injection spark ignition (DISI) engines, and heavy-duty diesel truck engines. In an investigation of unmodified two-stroke engines running at high engine speed, it has been shown that cycle-resolved laser diagnostics are applicable to real-world engines. The emission of unburned fuel was detected at the exhaust port with successful discrimination against other unburned hydrocarbons. Although a few problems remain to be solved in order to get quantitative concentration data, valuable information can nonetheless be attained using this technique. The technique would benefit from the use of a non-fluorescing lubricant, as that would decrease the background fluorescence. Laser-based techniques also provide a useful tool for studying the fuel dynamics inside the cylinder. In the development of DISI engines it is of particular importance to acquire knowledge about the distribution of fuel around the spark plug. Numerical computer codes are often used as design tools in these applications. Laser techniques are capable of yielding instantaneous multi-point concentration information with high spatial and temporal resolution, making them ideal both for validation of CFD simulations and for testing designs. The feasibility of using laser diagnostics in the development of DISI engines has been shown. Future research should be aimed at simplifying the procedure for quantifying the data, since a fairly simple and reliable technique would be an important asset for the industry. In a more fundamental study, it has been shown that it is possible to simultaneously detect a substance in both liquid and vapour phase. Water was used in the study since it is easily produced in both phases. Liquid drops were detected using spontaneous Raman scattering, whereas the vapour surrounding them

  14. 火花塞

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    [篇名] A study on a spark plug for charging of stratified mixture in a local area, [篇名] A triple band microstrip patch antenna, [篇名] Analysis of the Combustion Process: Detailed and at the same time Easy and Safe in Operation, [ 篇名] Automotive ignition transfer efficiency, [篇名] Combustion diagnostics of a spark ignition engine using a spark plug as an ion probe, [ 篇名 ] Correlation concept between mixture formation and ignition applied to a GDI high-speed engine, [篇名 ] Determining the air-fuel ratio of a four-stroke internal combustion engine form spark ignition voltage waveforms, [篇名 ] Development and evaluation of a novel optical interface for spark ignition engine research.

  15. Hydrogen-Assisted IC Engine Combustion as a Route to Hydrogen Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Andre Boehman; Daniel Haworth

    2008-09-30

    composition and utilization through laboratory studies of spark-ignition engine operation on H{sub 2}-NG and numerical simulation of the impact of hydrogen blending on the physical and chemical processes within the engine; and (2) Examination of hydrogen-assisted combustion in advanced compression-ignition engine processes. To that end, numerical capabilities were applied to the study of hydrogen assisted combustion and experimental facilities were developed to achieve the project objectives.

  16. Flex Fuel Optimized SI and HCCI Engine

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Guoming; Schock, Harold; Yang, Xiaojian; Huisjen, Andrew; Stuecken, Tom; Moran, Kevin; Zhen, Ron; Zhang, Shupeng

    2013-09-30

    The central objective of the proposed work is to demonstrate an HCCI (homogeneous charge compression ignition) capable SI (spark ignited) engine that is capable of fast and smooth mode transition between SI and HCCI combustion modes. The model-based control technique was used to develop and validate the proposed control strategy for the fast and smooth combustion mode transition based upon the developed control-oriented engine; and an HCCI capable SI engine was designed and constructed using production ready two-step valve-train with electrical variable valve timing actuating system. Finally, smooth combustion mode transition was demonstrated on a metal engine within eight engine cycles. The Chrysler turbocharged 2.0L I4 direct injection engine was selected as the base engine for the project and the engine was modified to fit the two-step valve with electrical variable valve timing actuating system. To develop the model-based control strategy for stable HCCI combustion and smooth combustion mode transition between SI and HCCI combustion, a control-oriented real-time engine model was developed and implemented into the MSU HIL (hardware-in-the-loop) simulation environment. The developed model was used to study the engine actuating system requirement for the smooth and fast combustion mode transition and to develop the proposed mode transition control strategy. Finally, a single cylinder optical engine was designed and fabricated for studying the HCCI combustion characteristics. Optical engine combustion tests were conducted in both SI and HCCI combustion modes and the test results were used to calibrate the developed control-oriented engine model. Intensive GT-Power simulations were conducted to determine the optimal valve lift (high and low) and the cam phasing range. Delphi was selected to be the supplier for the two-step valve-train and Denso to be the electrical variable valve timing system supplier. A test bench was constructed to develop control strategies for

  17. 40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

    Science.gov (United States)

    2010-07-01

    ... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

  18. Effect of EGR on SIDI Engine Thermal Efficiency%废气再循环对增压直喷汽油机热效率的影响

    Institute of Scientific and Technical Information of China (English)

    吴达; 许敏; 李铁

    2013-01-01

    结合热力学第一定律和第二定律深入分析了EGR对增压直喷汽油机在全负荷和中等负荷时热效率的影响机理.全负荷时,EGR的引入可以消除缸内混合气加浓,增加工质比热容比,改善燃烧放热等容度,减少传热损失,从而提高热效率,但其燃烧不可逆损失增加;中等负荷时,EGR的引入除了上述几个因素的改善外,还减少了进排气行程的泵气损失,从而较显著地提高了热效率.尽管EGR使得燃烧过程中产生的不可逆损失增加,但在全负荷和中等负荷时汽油机的有效效率均得到改善.%The effect of EGR on thermal efficiency in full load and medium load of boosted spark-ignition direct-injection (SIDI) gasoline engine was analyzed by combining the first and second laws of thermodynamics.In full load,the introduction of EGR eased the enrichment of fuel,increased the specific heat ratio,improved the heat release of constant volume and decreased the heat transfer loss,and hence the heat efficiency increased,but the irreversible loss of combustion increased.In medium load,the introduction of EGR also decreased the pump loss besides the improvements of full load and hence the heat efficiency obviously improved.Although the irreversible loss during the combustion process caused by EGR increased,the effective thermal efficiency in full load and medium load both improved.

  19. Reinforcement-learning-based output-feedback control of nonstrict nonlinear discrete-time systems with application to engine emission control.

    Science.gov (United States)

    Shih, Peter; Kaul, Brian C; Jagannathan, Sarangapani; Drallmeier, James A

    2009-10-01

    A novel reinforcement-learning-based output adaptive neural network (NN) controller, which is also referred to as the adaptive-critic NN controller, is developed to deliver the desired tracking performance for a class of nonlinear discrete-time systems expressed in nonstrict feedback form in the presence of bounded and unknown disturbances. The adaptive-critic NN controller consists of an observer, a critic, and two action NNs. The observer estimates the states and output, and the two action NNs provide virtual and actual control inputs to the nonlinear discrete-time system. The critic approximates a certain strategic utility function, and the action NNs minimize the strategic utility function and control inputs. All NN weights adapt online toward minimization of a performance index, utilizing the gradient-descent-based rule, in contrast with iteration-based adaptive-critic schemes. Lyapunov functions are used to show the stability of the closed-loop tracking error, weights, and observer estimates. Separation and certainty equivalence principles, persistency of excitation condition, and linearity in the unknown parameter assumption are not needed. Experimental results on a spark ignition (SI) engine operating lean at an equivalence ratio of 0.75 show a significant (25%) reduction in cyclic dispersion in heat release with control, while the average fuel input changes by less than 1% compared with the uncontrolled case. Consequently, oxides of nitrogen (NO(x)) drop by 30%, and unburned hydrocarbons drop by 16% with control. Overall, NO(x)'s are reduced by over 80% compared with stoichiometric levels.

  20. Utilisation de produits organiques oxygénés comme carburants et combustibles dans les moteurs. Première partie : Aspects techniques de l'utilisation sur moteur Using Oxygenated Organics Products As Fuels in Engines. Part One: Technical Aspects of Use in Engines

    Directory of Open Access Journals (Sweden)

    Guibet J. C.

    2006-11-01

    Full Text Available L'étude consiste à examiner les principales incidences techniques de l'emploi de produits organiques oxygénés (alcools, ethers. . . comme carburants et combustibles dans les moteurs à allumage commandé et diesel. On a tenté d'établir une synthèse des études très nombreuses réalisées sur ce sujet surtout depuis les cinq dernières années. On a considéré une large variété de produits (méthanol, éthanol, autres alcools, éthers organiques, systèmes acétono-butyliques. . . utilisés tels quels ou en mélange dans les produits pétroliers classiques. Des techniques particulières comme la carburation catalytique, la fumigation ou la double injection ont également été examinées. This article examines the main technical impacts of using oxygenated organic products (alcohols, ethers, etc. as fuels in spark-ignition and diesel engines. An attempt is made to provide a synthesis of the enormous volume of research that has been done on this subject, especially in the last five years. A wide variety of products is considered (methanol, ethanol, other alcohols, organic ethers, butyl-acetone systems, etc. , used either unblended or blended with conventional petroleum produtcs. Special techniques such as catalytic carburation, fumigation or dual injection are also examined.